WorldWideScience

Sample records for properties tyazhelaya voda

  1. Ispitivanje fizikalno-kemijskih pokazatelja kvalitete voda

    Directory of Open Access Journals (Sweden)

    Anita Ptiček Siročić

    2016-09-01

    Full Text Available U ovom su radu analizirani fizikalno-kemijski pokazatelji kakvoće otpadnih voda (kemijska potrošnja kisika (KPK, biokemijska potrošnja kisika (BPK5, koncentracija suspendiranih tvari tijekom ljetnih mjeseci (lipanj, srpanj i kolovoz 2013. i 2014. godine na centralnom uređaju za pročišćavanje otpadnih voda Čakovec, koji je predviđen za drugi stupanj pročišćavanja. Ljetni mjeseci 2014. godine ne pokazuju značajnija odstupanja vrijednosti pojedinih pokazatelja, ali u odnosu na iste mjesece u 2013. godini srednje mjesečne vrijednosti znatno su niže i nalaze se unutar dopuštenih maksimalnih koncentracija. Rezultati za lipanj, srpanj i kolovoz 2013. i 2014. godine ukazuju na učinkovito pročišćavanje otpadnih voda na pročistaču.

  2. Miocene Tectonics at the Pannonian - Carpathian Transition: The Bogdan Voda - Dragos Voda fault system, northern Romania

    Science.gov (United States)

    Tischler, M.; Gröger, H.; Marin, M.; Schmid, S. M.; Fügenschuh, B.

    2003-04-01

    Tertiary tectonics in the Pannonian-Carpathian transition zone was dominated by opposed rotations of Alcapa and Tisza-Dacia, separated by the Mid-Hungarian lineament (MHL). While in the Pannonian basin the MHL is well known from geophysical and borehole data, its northeastern continuation remains a matter of discussion. Our field based study, located in the Maramures mountains of northern Romania, provides new kinematic data from the Bogdan Voda fault, a first order candidate for the prolongation of the MHL to the northeast. In the Burdigalian, the Pienides (unmetamorphic flysch nappes) were emplaced onto the autochthonous Paleogene flysch units. Kinematic data consistently indicate top to the SE-directed thrusting of the Pienides and selected imbrications in the autochthonous units. Between Langhian and Tortonian these thrust contacts were offset by the E-W trending Bogdan Voda fault and its eastern continuation, the Dragos-Voda fault. These two faults share a common polyphase history, at least since the Burdigalian. Kinematic data derived from mesoscale faults indicate sinistral strike-slip displacement, in good agreement with kinematics inferred from map view. The NE-SW trending Greben fault, another fault of regional importance, was coevally active as a normal fault. From stratigraphic arguments major activity of this fault system is constrained to the time interval between 16.4-10 Ma. While deformation is strongly concentrated in the sedimentary units, the easterly located basement units are affected by abundant minor faults of similar kinematics covering a wide area. These SW-NE trending strike slip faults feature a normal component and resemble an imbricate fan geometry. Since Burdigalian thrusting is consistently SE-directed on either side of the Bogdan-Dragos Voda fault, major post-Burdigalian differential rotations can be excluded for the northern and southern block respectively. Hydrothermal veins within Pannonian volcanic units are aligned along the

  3. Marketingový mix volejbalového klubu Aero Odolena Voda

    OpenAIRE

    Hons, Michal

    2013-01-01

    Title: Volleyball club Aero Odolena Voda marketing mix analysis Targets: To perform an overall evaluation of the current Aero Odolena Voda marketing mix, using SWOT analysis bring strenghts and weaknesses to light. Based on this analysis suggest possible modification that would lead to a better marketing mix. Methods: Using qualitative methods such as interview, alongside with quantitative methods such as questioning, SWOT analysis and using secundary dates. Results: The specific modification...

  4. Treatment of radioactive liquid wastes at the Boris Kidric Institute of Nuclear Sciences at Vinca, Yugoslavia; Obrada radioaktivnih otpadnih voda

    Energy Technology Data Exchange (ETDEWEB)

    Jankovic, O [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

    1969-07-01

    A survey of the past work on decontamination and disposal of radioactive liquid wastes is given. The procedure of collecting and disposal of radioactive liquid wastes being formed are described. Also a general view of tested and developed methods of coprecipitation and ion exchange for removal of radionuclides from liquid wastes is reported. Scheme of experimental plant based on precipitation processes and ion exchange, capacity 100 1/h, that should start to operate at the end of 1969 has been illustrated (author) [Serbo-Croat] Dat je prikaz dosadasnjeg rada na problemima dekontaminacije i odlaganja radioaktivnih otpadnih voda. Opisani su postupci sakupljanja i odlaganja nastalih radioaktivnih voda. Dat je pregled ispitivanih i razvijanih metoda koprecipitacije-talozenja i jonske izmene za uklanjanje radionuklida iz otpadnih voda. Prikazana je shema eksperimentalnog postrojenja baziranog na procesima talozenja i jonske izmene, kapaciteta 100 1/cas, koje treba da bude pusteno u pogon krajem 1969. godine (author)

  5. Farnost Odolena Voda roku 1736. Obrazová mapa jako zástupný symbol

    Czech Academy of Sciences Publication Activity Database

    Šimůnek, Robert

    2017-01-01

    Roč. 35, č. 1 (2017), s. 10-34 ISSN 0862-2043 R&D Projects: GA ČR(CZ) GBP410/12/G113 Institutional support: RVO:67985963 Keywords : Odolena Voda * Kuben Jan * church * symbol * baroque era Subject RIV: AB - History OBOR OECD: History (history of science and technology to be 6.3, history of specific sciences to be under the respective headings)

  6. Preciscavanje otpadnih voda u postupcima prerade i flegmatizacije eksploziva / Refining of waste waters in processes of manufacturing and coating of high explosives

    Directory of Open Access Journals (Sweden)

    Mirjana Anđelković-Lukić

    2002-03-01

    Full Text Available U radu su prikazani tehnološki postupci prerade (flegmatizacije eksploziva pri kojima dolazi do zagađenja okoline otpadnim vodama. Prikazani su neki od načina prerade otpadnih voda pre nego što se ispuste u javne vodotokove. / The paper deals with production processes of manufacturing and coating Ugh explosives which pollute environment with waste waters. Some methods of refining waste waters before letting them into open water current are presented.

  7. USPOREDNA ANALIZA VELIKIH VODA PROVEDENA UOBIČAJENIM METODAMA I METODOM GEMORFOLOŠKOG TRENUTNOG JEDINIČNOG HIDROGRAMA PRIMJENOM EBA4SUB PROGRAMA

    OpenAIRE

    Mulaomerović–Šeta, Ajla; Prskalo, Gordan; Lozančić, Željko; Petroselli, Andrea; Bakalović, Amina

    2017-01-01

    Problem određivanja hidrograma velikih voda jedan je od temeljnih problema u hidrotehničkoj praksi. Za definiranje hidrograma, odnosno njegovog vrha (pika), uobičajeno se koriste statističke metode godišnjih ekstrema i pikova, za koje je nužno raspolagati povijesnim podacima o protoku, zatim empirijski izrazi, te hidrološki modeli. U radu je prikazana primjena hidrološkog modela EBA4SUB (Event-Based Approach for Small Ungauged Basins) namijenjenog za definiranje hidrograma otjecanja na neizuč...

  8. Effects of 1-D versus 3-D velocity models on moment tensor inversion in the Dobrá Voda area in the Little Carpathians region, Slovakia

    Czech Academy of Sciences Publication Activity Database

    Jechumtálová, Zuzana; Bulant, P.

    2014-01-01

    Roč. 18, č. 3 (2014), s. 511-531 ISSN 1383-4649 R&D Projects: GA ČR GAP210/10/1728 EU Projects: European Commission(XE) 230669 - AIM Institutional support: RVO:67985530 Keywords : ray tracing * 1-D and 3-D velocity models * earthquake mechanism * amplitude inversion * Dobrá Voda earthquakes Subject RIV: DC - Siesmology, Volcanology, Earth Structure Impact factor: 1.386, year: 2014

  9. Psychická zátěž ošetřovatelského týmu Domova se zvláštním režimem Dobrá Voda u Českých budějovic

    OpenAIRE

    PAŤHOVÁ, Eva

    2010-01-01

    The bachelor thesis deals with the issue of psychological distress of the nursing staff at the Residential Care Home - Nursing Home Dobrá Voda at České Budějovice. A nursing home is a facility providing its clients who are partially self-sufficient due to organic brain damage or dementia with social and residential services. A nursing team (consisting of medical staff and staff providing direct care) provides its clients with 24-hour-a-day nursing care. There are a number of specifications as...

  10. Russian Vodka - A National Tragedy

    Science.gov (United States)

    2009-03-01

    Most of these were alcoholic, with the exception of voda and syta. However, besides voda, all had a non- alcoholic version or could be easily fermented ...USSR,” 492. 175 Treml, “Death from Alcohol Poisoning in the USSR,” 493. 176 Ibid., 494. 177 Ibid.., 495. 41 tooth powder, vinegar , and shoe...consumed aircraft gun coolant, vehicle antifreeze, and vinegar concentrate. 234 Today, Russia’s military is overwhelmed by manpower and morale problems

  11. Miocene tectonics of the Maramures area (Northern Romania): implications for the Mid-Hungarian fault zone

    Science.gov (United States)

    Tischler, M.; Gröger, H. R.; Fügenschuh, B.; Schmid, S. M.

    2007-06-01

    The interplay between the emplacement of crustal blocks (e.g. “ALCAPA”, “Tisza”, “Dacia”) and subduction retreat is a key issue for understanding the Miocene tectonic history of the Carpathians. Coeval thrusting and basin formation is linked by transfer zones, such as the Mid-Hungarian fault zone, which seperates ALCAPA from Tisza-Dacia. The presented study provides new kinematic data from this transfer zone. Early Burdigalian (20.5 to ˜18.5 Ma) SE-directed thrusting of the easternmost tip of ALCAPA (Pienides), over Tisza-Dacia is linked to movements along the Mid-Hungarian fault zone and the Periadriatic line, accommodating the lateral extrusion of ALCAPA. Minor Late Burdigalian (˜18.5 to 16 Ma) NE-SW extension is interpreted as related to back-arc extension. Post Burdigalian (post-16 Ma) NE SW shortening and NW SE extension correlate with “soft collision” of Tisza-Dacia with the European foreland coupled with southward migration of active subduction. During this stage the Bogdan-Voda and Dragos-Voda faults were kinematically linked to the Mid-Hungarian fault zone. Sinistral transpression (16 to 12 Ma) at the Bogdan-Voda fault was followed by sinistral transtension (12 10 Ma) along the coupled Bogdan-Dragos-Voda fault system. During the transtensional stage left-lateral offset was reduced eastwards by SW trending normal faults, the fault system finally terminating in an extensional horse-tail splay.

  12. ...Da ne sudimõ budete / Karen Drambjan

    Index Scriptorium Estoniae

    Drambjan, Karen

    2008-01-01

    Autor analüüsib, millised on võimaliku vene parteide kandidaadi Georgi Bõstrovi võimalused saada valituks Euroopa Parlamenti. Vt. ka Mihhail Petrov. Tjomna voda v oblatsehh, Vesti Dnja 2. juuni 2008 lk. 4

  13. Kde se vzala voda na Zemi?

    Czech Academy of Sciences Publication Activity Database

    Kletetschka, Günther

    2017-01-01

    Roč. 1, č. 2 (2017), s. 9-9 ISSN 2533-784X Institutional support: RVO:67985831 Keywords : watter * geology * Earth and watter Subject RIV: DB - Geology ; Mineralogy http://www.avcr.cz/opencms/export/sites/avcr.cz/.content/galerie-souboru/AB/A_02_2017_web.pdf

  14. Late Miocene Debris-Avalanche Deposit At The Gutai Shield Volcano, NW Romania. Re- Evaluation Of Geological Mapping And Mineral Deposits

    Science.gov (United States)

    Seghedi, I.; Fülöp, A.

    2009-05-01

    The recent identification of debris avalanche deposits (DADs) originating from the southern edge of the Ignis peak (1306m, highest of the Gutai Mts.) has important implications for understanding its genesis in the geological context of the broader area, rich in hydrothermal intrusive-related base metal and gold-silver deposits closely connected to the Dragos Voda - Bogdan Voda strike-slip fault system. Pyroxene andesite lavas are exposed below the Ignis peak followed by hornblende and pyroxene andesites the only ones found in the DAD. The flank failure event has left an E-W-oriented horseshoe shaped scar with an estimated volume of material removed of at least 0.35 km3 and an estimated area covered by DADs of 4,345 km2 as a minimum. The deposit is a mega breccia with a variable amount of coarse matrix with jigsaw-fractured blocks, large boulders, and several southward-elongated hummocks up to 1.8 km distance from the scar. Between 720-850 m altitude the DADs contain megablocks of 5-12 m thick and up to 100 m long of layered fine-grained poorly consolidated pyroclastic materials of interlayered ash and lapillistone of fallout origin, and clay beds rich in vegetation remnants(known as the 'Chiuzbaia flora' of similar age as the surrounding lava flows, i.e. ca. 10-7 Ma) and diatoms. These megablocks found in various positions, suggest a lithological discontinuity likely representing the detachment surface of the gravity-driven instability phenomenon and the deep excavation of the volcano flank by the sector collapse event. The clayey material of these blocks acted probably as an efficient barrier to water infiltration and helped destabilization of the overlying rock mass. Since no explosive products have been observed to follow the DAD, it is possible that the sliding was triggered by pressure release of hydrothermal system along an E-W fault parallel to the Dragos Voda-Bogdan Voda fault system, with related high-grade ore deposits. This suggests the possible presence

  15. Narvskaja voda opassna dlja zdorovja / Kirill Smirnov

    Index Scriptorium Estoniae

    Smirnov, Kirill

    2007-01-01

    AS Narva Vesi joogivees esinevad jääkkloorist tingitud kõrvalproduktid sellise kontsentratsiooniga, et linnaelanikel soovitatakse juua pudelivett. Ettevõtte juht ja linnajuhid vett ohtlikuks ei pea

  16. ANALIZA VIZUALNE EMBALAŽE (ČOKOLADA, VODA)

    OpenAIRE

    Hriberšek, Aljaž

    2014-01-01

    Pri izdelkih najrazličnejših blagovnih znamk predstavlja vizualno podobo embalaža, ki je »prodajalec s police«. Embalaža tako predstavlja komunikacijsko sredstvo podjetja, ki je lahko odločilnega pomena v procesu potrošnikove nakupne odločitve. V teoretskem delu naloge je predstavljeno ozadje oblikovanja blagovne znamke, njene podobe, identitete in ostalih ključnih značilnosti, ki so pomembne za razumevanje posameznega izdelka s poudarkom na celostni grafični podobi, ki je ključnega pomena za...

  17. Poka tsvetjot bagulnik : [luuletused] / Minni Nurme ; tlk. Svetlan Semenenko, lühibiograafia: T. L. [Toomas Liiv

    Index Scriptorium Estoniae

    Nurme, Minni

    1999-01-01

    Sisu: Poka tsvetjot bagulnik ; "Vsju notsh kapalo so streh..." ; "Tvoi petshali - blesk i sujeta..." ; "Zemlja, voda, ogon - moja rodina..." ; "Ja i ne zametila..." ; "Ossenju vetki stutshatsja v okno...". Orig.: Sookailudes on loitsud ; "Kogu öö tilguvad räästad vabanemist vabanemisest..." ; "Muld, vesi, tuli on mu sugulased..." ; "Sügistuultega oksad kriibivad vastu akent..."

  18. Zdravotně technické instalace provozní a výrobní budovy

    OpenAIRE

    Nesvadbová, Petra

    2012-01-01

    Administrativní budova se zázemím šaten a umýváren pro přidruženou průmyslovou výrobu v hale. Využití dešťových vod pro splachování. Řešeno oddílnou kanalizací. Dešťová voda je přivedena do retenční nádrže, odkud je odebírána pro splachování. Přebytečná dešťová voda se vsakuje pomocí bloků seskládaných do drenážního systému v podzemním prostoru. Šetření vody pomocí úsporných armatur a zařízení. Navrženy úsporné sprchové hlavice, baterie, WC nádržky s úsporným provozem a pisoáry. Administra...

  19. Sinteza bakrovih, kobaltovih in nikljevih koordinacijskih spojin z izoniazidom

    OpenAIRE

    Hrastar, Sabina

    2016-01-01

    V diplomskem delu sem se ukvarjala s sintezo in karakterizacijo novih bakrovih, kobaltovih in nikljevih koordinacijskih spojin. Za sintezo smo uporabili bakrov acetat monohidrat, kobaltov acetat tetrahidrat in nikljev acetata tetrahidrat ter ligand izoniazid. Izvedli smo sedemdeset sinteznih reakcij, pri čemer smo spreminjali različne parametre: čas sinteze, temperaturo, topilo (destilirana voda, metanol, etanol, aceton, acetonitril, tetrahidrofuran, diklorometan, N,N-dimetilformamid) in post...

  20. Organic Pollutant Contamination of the River Tichá Orlice as Assessed by Biochemical Markers

    Directory of Open Access Journals (Sweden)

    M. Havelková

    2008-01-01

    Full Text Available This study used biochemical markers to assess contamination at two contaminated sites (Králíky and Lichkov and one control site (Červená Voda on the River Tichá Orlice, a left-side tributary of the River Elbe. The brown trout (Salmo trutta fario was selected as an indicator species. Enzymes of the first stage of xenobiotic conversion, namely cytochrome P450 (CYP 450 and ethoxyresorufin-O-deethylase (EROD in the liver were selected as biochemical markers. Blood plasma vitellogenin concentrations were used to evaluate xenoestrogenic effects of contamination. Results were compared with the most important inductors of these markers, i.e. with organic pollutants (PCB, HCH, HCB, OCS and DDT and their metabolites in fish muscle and with PAH concentrations in bottom sediments. The highest contamination with organic pollutants was at Králíky, and this was reflected in increased cytochrome P450, EROD activity and vitellogenin concentrations. Significant differences were demonstrated in EROD activity and vitellogenin concentrations between Králíky and Červená Voda (P s = -0.964 between EROD activity and vitellogenin concentrations was demonstrated. This relationship was discussed from the point of view of a possible induction or inhibition of the assessed biomarkers at persistently highly contaminated sites.

  1. Internal exposure to 222Rn progeny of the underground workers in Bulgarian uranian mines in 1958-1989

    International Nuclear Information System (INIS)

    Dimitrov, M.; Presiyanov, D.

    1998-01-01

    The results of more than 50000 measurements of 222 Rn and 22R n progeny measurements made in 1958-1989 in 9 large Bulgarian uranium mines (namely: '9 septemvri', 'Seslavci', 'Eleshnitsa 1, 2, 3', 'Smolyan', 'Byalata voda', 'Balkan' and 'Smolyanovtsi') have been summarized. The average WLM-exposures have been determined for each of the mines. The results make possible to estimate internal WLM exposure of any miner, provided that his underground working experience is known

  2. Put ka hrvatskom industrijskom identitetu utemeljenom na vlastitim resursima i potencijalima

    OpenAIRE

    Filetin, Tomislav

    2011-01-01

    Hrvatska raspolaže s nizom prirodnih resursa i kombinacijom potencijala koji se nedovoljno inovativno koriste u strukturiranju, poticanju i provedbi novih proizvodnji. To su posebno: vrlo povoljan prostorni položaj i prometna infrastruktura; kvalitetna izvorska voda, vodotokovi i more; čisto i kvalitetno te raznovrsno tlo; velike šumske površine i kvalitetno drvo; povoljna klima, čist zrak i vjetar; osebujna kultura, tradicijske vrijednosti i vještine; ljubazni, dobro obrazovani, kreativni i ...

  3. Aspects of accident management in Cernavoda NPP

    International Nuclear Information System (INIS)

    Dascalu, N.

    1999-01-01

    As a general conclusion, the accident management system as implemented at Cerna voda NPP is expected to be appropriate for handling a severe accident, should it occur, in such a way that the environmental radiological consequences would be insignificant and radiation exposure of the personnel be within recommendations. It is recognized, however, that continued development and verification of the system as well as effective personnel training programs are essential to maintain the safety level achieved. (author)

  4. Razvoj i primena hemometrijskih metoda za klasifikaciju i procenu kvaliteta vode

    OpenAIRE

    Živojinović, Dragana Z.

    2013-01-01

    Savremeno društvo karakteriše intenzivna industrijalizacija i urbanizacija, što ima za posledicu sve obimnije iscrpljivanje prirodnih resursa i sve opasnije ugrožavanje životne sredine. U uslovima globalnog razvoja, briga o vodi predstavlja pitanje opstanka civilizacije. Stoga upravljanje vodama i kontrola kvaliteta voda postaju suštinska društvena potreba. Timovi stručnjaka iz različitih oblasti pokušavaju da nađu obrasce i modele za modelovanje parametara kvaliteta vode i pre...

  5. Systems of amonium polyborates - monoammonium phosphate -water at 25 deg C. Sistemy poliboraty ammoniya - monoammonijfosfat - voda pri 25 grad S

    Energy Technology Data Exchange (ETDEWEB)

    Skvortsov, V G; Sadetdinov, Sh V; Polenov, A D; Mikhajlov, V I [Chuvashskij Gosudarstvennyj Pedagogicheskij Inst., Cheboksary (Russian Federation)

    1992-11-01

    It is established by solubility and refractometry methods at 25 deg C that systems of ammonium tetraborate (pentaborate) monoammonium phosphate-water refer to sumple eutonic type. The ammonium borates and monoammoniumphosphate exert salting effect over each other. It is found that phosphate borate compositions on the basis of ammonium salts are characterized by lower inhibitor properties as compared to sodium salts.

  6. Hot cells for testing the UO{sub 2} fuel elements after irradiation. Radiation protection conditions for hot cells design; Vruce celije za ispitivanje gorivnih elemenata UO{sub 2} posle ozracivanja, Uslovi zastite pri projektovanju vrucih celija

    Energy Technology Data Exchange (ETDEWEB)

    Pavlovic, A; Devic, J; Mihailovic, K [Institut za nuklearne nauke Vinca, Belgrade (Yugoslavia)

    1969-07-01

    This paper includes protection conditions which hot cells should satisfy for the investigation of fuel elements after reactor irradiation. The basic elements of hot cells are given, and the conditions for a special ventilation, dosimetric control and a special treatment of contaminated water are established (author) U radu su obuhvaceni uslovi zastite koje treba da zadovolje vruce celije za ispitivanje gorivnih elemenata posle ozracivanja u reaktoru, dati su osnovni elementi vrucih celija i postavljeni su uslovi za specijalnu ventilaciju, dozimentrijsku kontrolu i specijalni tretman otpadnih voda (author)

  7. Mogućnosti zbrinjavanje vegetabilne vode nastale procesom ekstrakcije maslinovog ulja

    OpenAIRE

    Palčić, Igor; Benčić, Đani; Moslavac, Tihomir

    2009-01-01

    Maslinarstvo Republike Hrvatske u snažnom je usponu. Razlog su tome prirodne blagodati koje omogućuju proizvodnju ekstra djevičanskih maslinovih ulja visoke kakvoće. Površine pod kulturom masline rastu iz godine u godinu. Kako se većina plodova masline prerađuju u maslinovo ulje, porastom količine prerađenih plodova raste i količina dobivenih nusprodukata tijekom procesa ekstrakcije maslinovog ulja. Nusprodukti su u prvom redu komina i vegetabilna voda. U Hrvatskoj se godišnje prema gruboj pr...

  8. Micro, nanosystems and systems on chips modeling, control, and estimation

    CERN Document Server

    Voda, Alina

    2013-01-01

    Micro and nanosystems represent a major scientific and technological challenge, with actual and potential applications in almost all fields of the human activity. The aim of the present book is to present how concepts from dynamical control systems (modeling, estimation, observation, identification, feedback control) can be adapted and applied to the development of original very small-scale systems and of their human interfaces. The application fields presented here come from micro and nanorobotics, biochips, near-field microscopy (AFM and STM) and nanosystems networks. Alina Voda has drawn co

  9. Smernice za izvedbo komunikacijskih povezav v sistemih za preskrbo s pitno vodo

    OpenAIRE

    PAVŠIČ, EDVARD

    2016-01-01

    Voda je osnovna človekova dobrina, ki spremlja človeštvo že od samega začetka. Zagotavljanje pitne vode je bilo nekoč velik izziv, prav nič drugače pa ni danes, kljub temu, da imamo visoko razvito tehnologijo za zajem, obdelavo in transport vode. V diplomskem delu primerjam stanje v sistemih za preskrbo s pitno vodo nekoč in danes ter nakažem možnosti za nadaljnji razvoj. Razdelam različne možnosti za prenos podatkov med soodvisnimi objekti vodovodnega sistema in ocenim njihove prednosti in s...

  10. Antepartum Fetal Monitoring and Spectral Analysis of Preterm Birth Risk

    Science.gov (United States)

    Păsăricără, Alexandru; Nemescu, Dragoş; Arotăriţei, Dragoş; Rotariu, Cristian

    2017-11-01

    The monitoring and analysis of antepartum fetal and maternal recordings is a research area of notable interest due to the relatively high value of preterm birth. The interest stems from the improvement of devices used for monitoring. The current paper presents the spectral analysis of antepartum heart rate recordings conducted during a study in Romania at the Cuza Voda Obstetrics and Gynecology Clinical Hospital from Iasi between 2010 and 2014. The study focuses on normal and preterm birth risk subjects in order to determine differences between these two types or recordings in terms of spectral analysis.

  11. Določitev območij poselitve v Sloveniji po vodnogospodarskih vidikih

    Directory of Open Access Journals (Sweden)

    Leon Gosar

    2004-01-01

    Full Text Available Uveljavitev pravnega reda Evropske unije prinaša obsežno strokovno delo tudi v vodno gospodarstvo. Na vodilno, Okvirno direktivo o vodah (WFD se navezujejo številne druge. Izpolnjevanje določil Direktive o ravnanju z odpadnimi komunalnimi vodami (UWWTD in Direktive o celovitem preprečevanju in omejevanju onesnaževanja (IPPCD bo tudi v Sloveniji zahtevalo znatne investicije. Področje komunalnih voda na operativni ravni ureja občina, država pa mora izpolnjevati prevzete državne obveznosti do EU. Pravočasno doseganje ciljev zahteva koordinacijo aktivnosti, temelječo na strokovnih podlagah. V UWWTD je eden osnovnih parametrov aglomeracija kot zaokroženo območje tako zgoščene poselitve, da zanj veljajo posebna določila in dinamika iz direktive. Merilo zgoščenosti je število prebivalcev na hektar. Za Slovenijo so bili izdelani najprimernejša mreža eno-hektarskih kvadratnih celic in trije tipi celic poselitve. Območje posamezne aglomeracije sestavljajo celice dveh najgostejših tipov poselitve, ki se stikajo. Površina aglomeracij je mnogo manjša od površine naselij iz RPE, zato so skupne slovenske obveznosti iz direktiv manjše, kar pokaže tudi strokovna podlaga za nacionalni program zbiranja in čiščenja odpadnih komunalnih in padavinskih voda. Izdelane aglomeracije so osnovni element načrtovanja in ukrepanja tudi za druga vodnogospodarska načrtovanja (npr. proti poplavni ukrepi, lahko pa si bi jih uporabilo tudi za programe komunalnega opremljanja in druga razvojna načrtovanja v prostoru.

  12. "Tshuvstvovalos, tshto skutshno..." : [luuletused] / Hasso Krull ; tlk. Marina Tervonen, lühibiograafia: T. L. [Toomas Liiv

    Index Scriptorium Estoniae

    Krull, Hasso, 1964-

    1999-01-01

    Sisu: "Tshuvstvovalos, tshto skutshno..." ; "Notsh tjazhela kak voda..." ; "Skvoz malenkije mõsli progljadõvajut namnogo bolshije..." ; "Jedut mashinõ..." ; "Pozovi, pridi i ja dam tebe..." ; "V jego ruke vissel tshemodan, on szhimal ego rutshku..." ; "Litso bõlo silno opuhshim, no on poprivetstvoval..." ; "Lavia igrajet v mjatsh v sadu, gde podlinnoje nepodlinno...". Orig.: "Tundub, et on igav olla..."; "Öö on raske nagu vesi..."; "Läbi pisikeste mõtete paistavad paljud suuremad..."; "Autod sõidavad..."; "Kutsu, tule ja ma annan sulle..."; "Tema käe otsas oli kohver, ta pigistas selle sanga..."; "Nägu oli kõvasti paistes, aga ta tervitas..."; "Lavija mängib palli aias, kus ehtne on ebaehtne..."

  13. Nove membranske tehnologije za obradu tekstilnih otpadnih voda i njihovu ponovnu uporabu

    DEFF Research Database (Denmark)

    Petrinić, Irena; Hélix-Nielsen, Claus

    2014-01-01

    Textile wastewater represents challenging feed streams to be treated by membrane separation due to the complex composition and presence of reactive components. Here we first briefly present some characteristics of textile wastewater remediation where a key issue is (bio)fouling. We then present...

  14. Riziková analýza vodovodu obecního typu

    OpenAIRE

    Potyšová, Petra

    2012-01-01

    Cílem diplomové práce bylo analyzovat vodovodní síť v obci Klobouky u Brna pomocí softwarové aplikace WaterRisk za použití jednoduché a komplexní metodiky. Na vodovodní síti bylo provedeno měření zákalu jako praktická podpora nežádoucích stavů. Rovněž byl proveden podrobný průzkum obce Klobouky u Brna. Přidanou hodnotou diplomové práce byla konzultace s provozním technikem ve společnosti Vodovody a kanalizace Hodonín, a.s. o zdroji vody a úpravně vody, ze které se voda přebírá pro obec Klobou...

  15. Investigation of corrosion of materials of the irradiation device in the RA reactor; Ispitivanje korozije materijala uredjaja za ozracivanje na reaktoru RA

    Energy Technology Data Exchange (ETDEWEB)

    Zaric, M; Mance, A; Vlajic, M [Institute of Nuclear Sciences Vinca, Beograd (Serbia and Montenegro)

    1963-12-15

    Devices for sample irradiation in the vertical RA reactor channels will be made of aluminium alloys. According to the regulations concerned with introducing materials into the RA reactor core, corrosion characterisation of these materials is an obligation. Corrosion properties of four aluminium alloys were investigated both in contact with stainless steel and without it. First part of this report deals with the corrosion testing of aluminium alloys in water by gravimetric and electrochemical methods. Bi-distilled water at temperatures less than 100 deg C was used. Second part is related to aluminium alloys corrosion in carbon dioxide gas under experimental conditions. The second part of research was initiated by the design of the head of the independent CO{sub 2} loop for samples cooling. [Serbo-Croat] Uredjaji za ozracivanje u vertikalnim kanalima reaktora RA, bice napravljeni od legura aluminjuma. Prema propisima o unosenju materijala u RA reaktor materijali se moraju prethodno ispitati i sa stanovista korozije. Ispitivane su korozione pojave na cetiri aluminjumske legure sa i bez kontakta sa nerdjajucim celikom. Prvi deo ovog rada tretira pitanje korozije legura aluminijuma u vodi gravimetrijskim i elektrohemijskim metodama. Koriscena je bidestilovana voda na temperaturi do 100 deg C. Drugi deo se odnosi na ispitivanje ponasanja legura aluminijuma u gasovitom ugljen dioksidu pod uslovima eksperimenta. Drugi deo istrazivanja izvrsen je za potrebe izgradnje glave petlje nezavisnog kola za hladjenje uzoraka gasovitim CO{sub 2}.

  16. Metafora i (giperëkstensija

    Directory of Open Access Journals (Sweden)

    Radić Jovanka

    2008-01-01

    Full Text Available (ruski Termin 'ëkstensija' imeet gorazdo bolee opredelennoe značenie po sravneniju s terminom metafora: ëkstensija podrazumevaet sposobnost' vyraženija (obyčno leksičeski zavisimogo slova k rasšireniju i vyraženiju svojstv predmetov, kotorye nastol'ko različny po svoej prirode, čto isključena vsjakaja vozmožnost' podobija ljubogo iz ih svojstv (ide čovek, ~ paun, ~ lav, ~ ekser, ~ voda; meka maca, ~ igračka, ~ bunda, meke papuče meko krzno, meka kruška, ~ voda, i t. p. Ëkstensija, v ukazannom značenii svjazana s giperëkstensiej, a takže s metaforoj ne po analogii, t. e. s pervymi tremja 'vidami' metafory, vydelennymi v 'Poëtike' Aristotelja ('perenesenie naimenovanija s odnogo predmeta na drugoj, pričem ili s roda na vid, ili s vida na rod, ili s vida na vid'. Različie meždu (1 poëtičeskoj metaforoj ('ukrašenie', 'stilističeskaja figura', zamečaemoj potomu, čto ona osnovyvaetsja na sbliženii dvuh ponjatij po analogii i tem samym 'soobščaet novoe znanie' ili 'živo predstavljaet vešč'', i (2 metaforoj ne po analogii t. e. perenosom naimenovanija, kotoryj neograničenno i nezametno rasširjaetsja, t. k. on ne osnovan na ustanovlenii svjazej po analogii meždu predmetami (ponjatijnaja metafora - aspekt, kotoryj do nedavnego vremeni vključalsja v termin polisemija, - možno dostatočno točno oboznačit' pri pomošči terminov intensivnaja i ëkstensivnaja metafora, sostavljajuščih oppoziciju. Takim obrazom, možno govorit' ob ëkstensivnoj metafore, kotoraja razvivaetsja v širinu i nezametna, i ob intensivnoj metafore, kotoraja zamečaetsja, t. k. razvivaetsja ne v širinu, a v glubinu.

  17. Annual report for 1979, Results of environmental radioactivity control on the 'B. Kidric' Institute site - precipitations, dust deposition, soil, plants, river sludge (Danube), Annex 2; Godisnji izvestaj za 1979. godinu, Rezultati rada na poslovima kontrole radioaktivnosti zivotne sredine na teritoriji Instituta 'B.Kidric' Deo: padavine i natalozena prasina, vode, zemljiste, rastinje, recni mulj (Dunav), Prilog 2

    Energy Technology Data Exchange (ETDEWEB)

    Ajdacic, N; Martic, M; Vujovic, V; Janicijevic, Z; Jovanovic, J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

    1980-10-15

    As previously, the control of the environmental radioactivity on the Institute site, was done by measuring the total beta activity of the following samples: precipitation, fallout deposits; water, soil, plants, and water and sediments from the Danube river at 1145 km. The regular control included 1706 samples. In addition to the regular control of the environment of the nuclear facility a number of water and heavy water samples were analyzed related to the repair and renewal actions at the RA reactor. Results of these analyses (total beta activity, electric conductivity and gamma spectrometry) were submitted in separate reports. Upon demand of the dosimetry service responsible for the control of the working environment of Radioisotope Laboratory 070, six samples (surface contamination, plants and soil) were taken from the area behind the HL building where radioactive waste is kept. Total beta activity of these samples has shown significant contamination of the soil and plants. Director and the decontamination service of the radiation protection laboratory were informed immediately about these results so that adequate measures could be undertaken. [Serbo-Croat] Kontrola radioaktivnosti zivotne sredine na teritoriji IBK, kao i prethodnih godina, vrsena je merenjem totalne beta radioaktivnosti uzoraka: padavina i natalozene prasine, voda, zemljista, rastinja i uzoraka vode i sedimenata uzimanih sa 1145 km reke Dunav. U okviru redovne kontrole sakupljeno je 1706 uzoraka. Pored redovne kontrole radioaktivnosti okoline nuklearnog postrojenja obradjeno je i mereno vise uzoraka voda, kao i teske vode (u vezi sa remontom reaktora RA), Rezultati ovih analiza (totalna beta aktivnost, elekticna provodljivost i gama specrometrijska analiza) podneti su u vidu posebnih izvestaja. Na zahtev dozimetrijske sluzbe odgovorne za kontrolu radne sredine u OOUR-070, odredjena je totalna beta aktivnost sest uzoraka briseva, rastinja i zemljista u cilju ustanovljavanja kontaminacije

  18. Stvarnopravno uređenje za plovila unutarnje plovidbe

    Directory of Open Access Journals (Sweden)

    Jasenko Marin

    2009-08-01

    Full Text Available U radu se analizira uređenje stvarnih prava na plovilima unutarnje plovidbe. Ovo pitanje postaje sve važnije u svjetlu općenitog ubrzanog razvoja plovidbe na unutarnjim plovnim putovima i njezinog gospodarskog značaja. Autor analizira odredbe Konvencije o upisu brodova unutarnje plovidbe, kao i odredbe Zakona o plovidbi i lukama unutarnjih voda te Pomorskog zakonika. Proučavaju se sva stvarna prava na plovilima kao i pitanje privremenog zaustavljanja i ovršne prodaje plovila. Analizira se usklađenost navedenih zakonskih propisa sa spomenutim međunarodnim izvorom prava koji obvezuje Republiku Hrvatsku. Ukazuje se na manjkavost pojedinih zakonskih rješenja kao i na općenit problem “simultane” primjene više pravnih izvora. Iznose se prijedlozi u cilju poboljšanja postojeće regulative na ovom području.

  19. Twenty years of chemistry associated with the needs and utilization of nuclear reactors at the 'Boris Kidric' Institute of nuclear sciences, Vinca, Yugoslavia; Dvadeset godina hemije vezane za potrebe i koriscenje nuklearnih reaktora u Institutu za nuklearne nauke 'Boris kidric' i Vinci

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1969-07-01

    This publication covers nine review papers on the following topics related to the needs and utilization of nuclear reactors in the Boris Kidric Institute of nuclear sciences during previous twenty years: radiochemistry, hot atom chemistry, isotope production, spent nuclear fuel reprocessing, chemistry of transuranium elements; liquid radioactive waste processing, purification of reactor coolant water by inorganic ion exchangers, research related to deuterium concentration processes, and chemical dosimetry at the RA reactor. [Serbo-Croat] Ova publikacija obuhvata devet radova, po sledecim naslovima, a odnose se na potrebe i uslove nuklearnih reaktora u Institutu za nuklearne nauke 'Boris Kidric' tokom prethodnih dvadeset godina: radiohemija, hemija vruceg atoma, proizvodnja radioaktivnih izotopa, prerada isluzenog nuklearnog goriva, hemija transuranskih elemenata, obrada radioaktivnih otpadnih voda, preciscavanje vode za hladjenje nuklearnih reaktora pomocu neorganskih jonoizmenjivaca, istrazivanje procesa za koncentrovanje deuterijuma i hemijska dozimetrija reaktora RA.

  20. Informacioni sistemi u upravljanju rizicima u životnoj sredini

    Directory of Open Access Journals (Sweden)

    Dejan Inđić

    2013-02-01

    Full Text Available Normal 0 MicrosoftInternetExplorer4 Sažetak: Zemljotresi, poplave, nuklearni i hemijski akcidenti, zagađivanje vazduha, zemljišta i voda, ukazuju na sve veće prisustvo nesreća nastalih intenzivnim razvojem i često nekontrolisanom primenom tehnološkog razvoja. Pred društvo se postavlja problem kako se što bolje pripremiti, kako obezbediti veću usklađenost i funkcionisanje aktivnosti i mera za sprečavanje nastanka akcidentnih situacija i kako uneti promene u društveni i tehnološki razvoj koje će ići u korist prirode, ali i za dobrobit budućih generacija. U radu je prikazano korišćenje različitih informacionih sistema (IS u upravljanju rizicima u životnoj sredini i predlog za izradu jedinstvenog IS u Republici Srbiji.

  1. Grassland vegetation in the former military area Dobrá Voda, the Šumava National Park

    Czech Academy of Sciences Publication Activity Database

    Prach, Karel; Bufková, I.; Zemek, František; Heřman, Michal; Mašková, Z.

    2000-01-01

    Roč. 5, - (2000), s. 101-112 ISSN 1211-7420 R&D Projects: GA ČR GA206/99/1410 Institutional research plan: CEZ:AV0Z6005908; CEZ:AV0Z6087904 Keywords : secondary grassland * succession * management * GIS Subject RIV: EF - Botanics

  2. Kinetics and Mechanism of the Iron(II-Iron(III) Electron-Exchange Reaction in Mixed Solvent Media; Cinetique et Mecanisme de l'Echange d'Electrons entre Fer (II) et Fer (III), dans des Melanges de Solvants; Ikinetika i mekhanizm reaktsii ehlektronnogo obmena zheleza (I) - zheleza (III) v smeshannoj rastvoryayushchej srede; Cinetica y Mecanismo del Intercambio de Electrones Entre Fe{sup II} Y Fe{sup lII} en Mezclas de Disolventes

    Energy Technology Data Exchange (ETDEWEB)

    Horne, R. A. [Arthur D. Little, Inc. Cambridge, MA (United States)

    1965-10-15

    de intercambio electronico entre Fe{sup II} y Fe{sup III} a diversas temperaturas, grados de acidez y fuerzas ionicas, en soluciones de aguaacetona, agua-metanol y agua-etanol. La velocidad de reaccion disminuye apreciablemente al aumentar la concentracion de agua en el ultimo de estos sistemas, tendiendo a cero con la concentracion. La energfa de activacion del intercambio es la misma en mezclas de disolventes que en solucion acuosa. La constante dielectrica efectiva que interviene entre los reactivos sigue siendo la misma que en agua pura, incluso par a soluciones en agua-etanol bastante pobres en agua. Las mediciones espectroscopicas y del intercambio electronico reflejan las alteraciones de la composicion de la vaina de solvatacion del Fe{sup III} en disolventes mixtos. Estos resultados corroboran la teoria de que el intercambio electronico se efectua por intermedio de puentes agua. (author) [Russian] Byli izmereny udel'nye kon stanty skorosti reakcii jelektronnogo obmena Fe{sup II} - Fe{sup III} n pri razlichnyh temperaturah kislotnostjah i ionnyh silah v sredah: voda - aceton, voda - metanal i voda - jetanol. Sko rost' reakcii zametno snizhaetsja s umen'sheniem koncentracii vody v poslednej sistem i priblizhaetsja k nulju, kogda koncentracija vody priblizhaetsja k nulju. Jenergija aktivaci obmena javljaetsja toj zhe samoj v.smeshannom rastvore, kak i v vodnom rastvore. Jeffektiv naja dijelektricheskaja konstanta, kotoruju 'vidjat' reagirujushhie veshhestva, prodolzhaet byt konstantoj chistoj vody dazhe v rastvorah - jetanol, vpolne rastvorimyh v vode. Iz menenija v sostave obolochki sol'vatacii Fe{sup III} v smeshannoj srede otrazhajutsja kak v jelek tronnom obmene, tak i v spektroskopicheskih izmerenijah. Jeti vyvody, poluchennye na osnov rezul'tatov v smeshannoj rastvorjajushhej srede, podtverzhdajut teoriju vodjanogo mostika pr jelektronnom obmene. (author)

  3. Thermal Property Engineering: Exploiting the Properties of Ceramic Nanocomposites

    Science.gov (United States)

    2018-03-01

    ARL-TR-8308 ● MAR 2018 US Army Research Laboratory Thermal Property Engineering : Exploiting the Properties of Ceramic...return it to the originator. ARL-TR-8308 ● MAR 2018 US Army Research Laboratory Thermal Property Engineering : Exploiting the...2015 – Dec 31 2017 4. TITLE AND SUBTITLE Thermal Property Engineering : Exploiting the Properties of Ceramic Nanocomposites 5a. CONTRACT NUMBER 5b

  4. Intellectual Property.

    Science.gov (United States)

    Swinson, John V.

    2000-01-01

    Intellectual property is a term that covers a number of different rights. Considers issues such as what are the basic forms of intellectual property; who owns the intellectual property created by a teacher; who owns intellectual property created by students; and use of downloaded materials from the internet. (Author/LM)

  5. Elastic properties

    International Nuclear Information System (INIS)

    Ledbetter, H.M.

    1983-01-01

    This chapter investigates the following five aspects of engineering-material solid-state elastic constants: general properties, interrelationships, relationships to other physical properties, changes during cooling from ambient to near-zero temperature, and near-zero-temperature behavior. Topics considered include compressibility, bulk modulus, Young's modulus, shear modulus, Poisson's ratio, Hooke's law, elastic-constant measuring methods, thermodynamic potentials, higher-order energy terms, specific heat, thermal expansivity, magnetic materials, structural phase transitions, polymers, composites, textured aggregates, and other-phenomena correlations. Some of the conclusions concerning polycrystalline elastic properties and their temperature dependence are: elastic constants are physical, not mechanical, properties which relate thermodynamically to other physical properties such as specific heat and thermal expansivity; elastic constants at low temperatures are nearly temperature independent, as required by the third law of thermodynamics; and elastic constants can be used to study directional properties of materials, such as textured aggregates and composites

  6. Valuation of Property.

    Science.gov (United States)

    Bodley, Joanne H.; Goodenough, Linda

    This report describes property tax revenues and assessment rates for all 50 States during 1966. The following information is summarized by State and by class of property: (1) The total valuation and the taxable valuation of property subject to local general property taxation and the percent distribution of total valuation by class of property; (2)…

  7. Contested Property Claims

    DEFF Research Database (Denmark)

    Property relations are such a common feature of social life that we can sometimes forget the immense complexity of the web of laws, practices, and ideas that allow a property regime to function smoothly. But we are quickly reminded of this complexity when social conflict over property erupts. When...... social actors confront a property regime – for example by squatting – they enact what can be called ‘contested property claims’. These confrontations raise crucial issues of social justice and show the ways in which property conflicts often reflect wider social conflicts. Through a series of case studies...... from across the globe, this multidisciplinary anthology exploring contested property claims brings together works from anthropologists, legal scholars, and geographers, who show how disagreements give us a privileged window onto how property regimes function and illustrates the many ways...

  8. Contested Property Claims

    DEFF Research Database (Denmark)

    Property relations are such a common feature of social life that the complexity of the web of laws, practices, and ideas that allow a property regime to function smoothly are often forgotten. But we are quickly reminded of this complexity when conflict over property erupts. When social actors...... confront a property regime – for example by squatting – they enact what can be called ‘contested property claims’. As this book demonstrates, these confrontations raise crucial issues of social justice and show the ways in which property conflicts often reflect wider social conflicts. Through a series...... of case studies from across the globe, this multidisciplinary anthology brings together works from anthropologists, legal scholars, and geographers, who show how exploring contested property claims offers a privileged window onto how property regimes function, as well as an illustration of the many ways...

  9. Optimization of mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy by heat treatment

    Directory of Open Access Journals (Sweden)

    Mianmian Bao

    2018-03-01

    Full Text Available Previous study has shown that Ti-3Cu alloy shows good antibacterial properties (>90% antibacterial rate, but the mechanical properties still need to be improved. In this paper, a series of heat-treatment processes were selected to adjust the microstructure in order to optimize the properties of Ti-3Cu alloy. Microstructure, mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy at different conditions was systematically investigated by X-ray diffraction, optical microscope, scanning electron microscope, transmission electron microscopy, electrochemical measurements, tensile test, fatigue test and antibacterial test. Heat treatment could significantly improve the mechanical properties, corrosion resistance and antibacterial rate due to the redistribution of copper elements and precipitation of Ti2Cu phase. Solid solution treatment increased the yield strength from 400 to 740 MPa and improved the antibacterial rate from 33% to 65.2% while aging treatment enhanced the yield strength to 800–850 MPa and antibacterial rate (>91.32%. It was demonstrated that homogeneous distribution and fine Ti2Cu phase plays a very important role in mechanical properties, corrosion resistance and antibacterial properties.

  10. Optimization of mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy by heat treatment.

    Science.gov (United States)

    Bao, Mianmian; Liu, Ying; Wang, Xiaoyan; Yang, Lei; Li, Shengyi; Ren, Jing; Qin, Gaowu; Zhang, Erlin

    2018-03-01

    Previous study has shown that Ti-3Cu alloy shows good antibacterial properties (>90% antibacterial rate), but the mechanical properties still need to be improved. In this paper, a series of heat-treatment processes were selected to adjust the microstructure in order to optimize the properties of Ti-3Cu alloy. Microstructure, mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy at different conditions was systematically investigated by X-ray diffraction, optical microscope, scanning electron microscope, transmission electron microscopy, electrochemical measurements, tensile test, fatigue test and antibacterial test. Heat treatment could significantly improve the mechanical properties, corrosion resistance and antibacterial rate due to the redistribution of copper elements and precipitation of Ti 2 Cu phase. Solid solution treatment increased the yield strength from 400 to 740 MPa and improved the antibacterial rate from 33% to 65.2% while aging treatment enhanced the yield strength to 800-850 MPa and antibacterial rate (>91.32%). It was demonstrated that homogeneous distribution and fine Ti 2 Cu phase plays a very important role in mechanical properties, corrosion resistance and antibacterial properties.

  11. Microstructure, mechanical properties, bio-corrosion properties and antibacterial properties of Ti–Ag sintered alloys

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Mian [Key Lab. for Anisotropy and Texture of Materials, Education Ministry of China, Northeastern University, Shenyang 110819 (China); Zhang, Erlin, E-mail: zhangel@atm.neu.edu.cn [Key Lab. for Anisotropy and Texture of Materials, Education Ministry of China, Northeastern University, Shenyang 110819 (China); Zhang, Lan [State Key Laboratory for Mechanical Behavior of Materials, Xi' an Jiaotong University, Xi' an 710049 (China)

    2016-05-01

    In this research, Ag element was selected as an antibacterial agent to develop an antibacterial Ti–Ag alloy by a powder metallurgy. The microstructure, phase constitution, mechanical properties, corrosion resistance and antibacterial properties of the Ti–Ag sintered alloys have been systematically studied by X-ray diffraction (XRD), scanning electron microscope (SEM), compressive test, electrochemical measurements and antibacterial test. The effects of the Ag powder size and the Ag content on the antibacterial property and mechanical property as well as the anticorrosion property have been investigated. The microstructure results have shown that Ti–Ag phase, residual pure Ag and Ti were the mainly phases in Ti–Ag(S75) sintered alloy while Ti{sub 2}Ag was synthesized in Ti–Ag(S10) sintered alloy. The mechanical test indicated that Ti–Ag sintered alloy showed a much higher hardness and the compressive yield strength than cp-Ti but the mechanical properties were slightly reduced with the increase of Ag content. Electrochemical results showed that Ag powder size had a significant effect on the corrosion resistance of Ti–Ag sintered alloy. Ag content increased the corrosion resistance in a dose dependent way under a homogeneous microstructure. Antibacterial tests have demonstrated that antibacterial Ti–Ag alloy was successfully prepared. It was also shown that the Ag powder particle size and the Ag content influenced the antibacterial activity seriously. The reduction in the Ag powder size was benefit to the improvement in the antibacterial property and the Ag content has to be at least 3 wt.% in order to obtain a strong and stable antibacterial activity against Staphylococcus aureus bacteria. The bacterial mechanism was thought to be related to the Ti{sub 2}Ag and its distribution. - Highlights: • Ti–Ag alloy with up to 99% antibacterial rate was developed by powder metallurgy. • The effects of the Ag powder size and the Ag content on the

  12. Physical properties

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Research activities into the physical properties of metals and ceramics at Lawrence Berkeley Laboratory during 1976 are reported. Topics covered include: high field superconductivity; microstructure and mechanical behavior of ceramics, glass-metal, and ceramic-metal systems; high temperature reactions; relation of microstructure to properties in ceramics; and structure and properties of carbon materials and composite materials

  13. 31 CFR 515.311 - Property; property interests.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Property; property interests. 515.311 Section 515.311 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... way of limitation, money, checks, drafts, bullion, bank deposits, savings accounts, debts...

  14. Property rights, productivity and common property resources

    DEFF Research Database (Denmark)

    Markussen, Thomas

    2008-01-01

    This paper uses data from the 2003/04 Cambodia Household Socioeconomic Survey to investigate the effects of property rights to land. Plots held with a paper documenting ownership in rural Cambodia are found to have higher productivity and land values than other plots, while property rights have...

  15. Equivalence properties for the Radon-Nikodym property types and ...

    African Journals Online (AJOL)

    We show that the types I- and II-Λ-Radon-Nikodym Property of Banach spaces on the one hand, and the I- and II-Λ-Complete Continuity Property on the other, are equivalent properties whenever Λ is an ordering subset of a discrete abelian group. Mathematics Subject Classification (2000): Primary 46E40, 46G10; ...

  16. Can listed property shares be a surrogate for direct property investment behaviour?

    Directory of Open Access Journals (Sweden)

    Douw Boshoff

    2012-03-01

    Full Text Available The listed property sector in South Africa has grown to a size which could be considered to be a good representation of the income producing property market in general. Stock market listed property investment funds offer the opportunity to compare indirect property investment to direct property investment, which could bridge the gap between irrational investment behaviour and intrinsic asset values. This study investigates the relationship between listed property share prices and the property values in listed property funds. The share prices are correlated with various factors, such as the accounting ratios of the companies, the financial statements of the companies and general economic variables. The outcome of the study is an explanation of the behaviour of listed property shares, and its relationship to the direct property market and the general economy. This would assist in the explanation of market behaviour and provides the opportunity to more accurately predict portfolio asset values, which might be used in the valuation of individual real estate assets.

  17. Microstructure, mechanical properties, bio-corrosion properties and antibacterial properties of Ti-Ag sintered alloys.

    Science.gov (United States)

    Chen, Mian; Zhang, Erlin; Zhang, Lan

    2016-05-01

    In this research, Ag element was selected as an antibacterial agent to develop an antibacterial Ti-Ag alloy by a powder metallurgy. The microstructure, phase constitution, mechanical properties, corrosion resistance and antibacterial properties of the Ti-Ag sintered alloys have been systematically studied by X-ray diffraction (XRD), scanning electron microscope (SEM), compressive test, electrochemical measurements and antibacterial test. The effects of the Ag powder size and the Ag content on the antibacterial property and mechanical property as well as the anticorrosion property have been investigated. The microstructure results have shown that Ti-Ag phase, residual pure Ag and Ti were the mainly phases in Ti-Ag(S75) sintered alloy while Ti2Ag was synthesized in Ti-Ag(S10) sintered alloy. The mechanical test indicated that Ti-Ag sintered alloy showed a much higher hardness and the compressive yield strength than cp-Ti but the mechanical properties were slightly reduced with the increase of Ag content. Electrochemical results showed that Ag powder size had a significant effect on the corrosion resistance of Ti-Ag sintered alloy. Ag content increased the corrosion resistance in a dose dependent way under a homogeneous microstructure. Antibacterial tests have demonstrated that antibacterial Ti-Ag alloy was successfully prepared. It was also shown that the Ag powder particle size and the Ag content influenced the antibacterial activity seriously. The reduction in the Ag powder size was benefit to the improvement in the antibacterial property and the Ag content has to be at least 3wt.% in order to obtain a strong and stable antibacterial activity against Staphylococcus aureus bacteria. The bacterial mechanism was thought to be related to the Ti2Ag and its distribution. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Endogenous property rights

    NARCIS (Netherlands)

    Dari-Mattiacci, G.; Guerriero, C.

    2014-01-01

    Albeit the relevance of property rights is well known, their determinants are still poorly understood. When property is fully protected, some buyers with valuation higher than that of original owners are inefficiently excluded from trade due to transaction costs. When protection of property is weak,

  19. 7 CFR 767.52 - Disposition of personal property from real estate inventory property.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Disposition of personal property from real estate..., personal property has been left on the real estate inventory property, the Agency will notify the former real estate owner and any known lienholders that the Agency will dispose of the personal property...

  20. 41 CFR 302-3.419 - For what property will my agency pay property management services?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false For what property will my agency pay property management services? 302-3.419 Section 302-3.419 Public Contracts and Property....419 For what property will my agency pay property management services? Your agency will only pay for...

  1. Theory of the property valuation + valuation of specific property in Prague 6

    OpenAIRE

    Wurst, David

    2011-01-01

    The objective of Bachelor thesis is the definition of basic terms and methods used in the property valuation and the subsequent valuation of specific property. The thesis is divided into theoretical and practical part. The theoretical part is devoted to (description) describing the basic terms and bases needed for the valuation and characteristics of the most widely used methods of property valuation. In the practical part is going to be made the valuation of the specific property by the comp...

  2. Properties of mathematical objects (Goedel on classes, properties and concepts)

    International Nuclear Information System (INIS)

    Materna, Pavel

    2007-01-01

    In terms of a sufficiently fine-grained theory we should distinguish between classes, properties and concepts. Since properties are best modeled as a kind of non-trivial intensions while mathematical objects are never non-trivial intensions we should not speak about properties of mathematical objects. When we do use the term property in mathematics (as Goedel did) we either mean classes, or the more fine-grained entities to be called concepts. In the latter case concepts have to be defined so that various distinct concepts could identify one and the same object. The notion of construction in transparent intensional logic makes it possible to construe concepts as abstract procedures. At the same time we have to distinguish between this notion and the notion of construction in constructivist systems: the former - unlike the latter - are objective and, therefore, acceptable for a realist

  3. Is [Rural] Property Tax Relevant?

    OpenAIRE

    Villaveces-Niño, Marta-Juanita

    2015-01-01

    The present document presents the general notions and the definition of property taxation and, as part of it, the working definition of rural property taxation emphasizing that property taxation is a matter of “property” and rural property taxation is linked with rural property, specifically with land ownership. In addition, the document presents some facts about the performance of property taxation based on a secondary source of cross-country analysis. In order to giv...

  4. Effect of extrusion processing on the microstructure, mechanical properties, biocorrosion properties and antibacterial properties of Ti-Cu sintered alloys

    International Nuclear Information System (INIS)

    Zhang, Erlin; Li, Shengyi; Ren, Jing; Zhang, Lan; Han, Yong

    2016-01-01

    Ti-Cu sintered alloys, Ti-Cu(S) alloy, have exhibited good anticorrosion resistance and strong antibacterial properties, but low ductility in previous study. In this paper, Ti-Cu(S) alloys were subjected to extrusion processing in order to improve the comprehensive property. The phase constitute, microstructure, mechanical property, biocorrosion property and antibacterial activity of the extruded alloys, Ti-Cu(E), were investigated in comparison with Ti-Cu(S) by X-ray diffraction (XRD), optical microscopy (OM), scanning electronic microscopy (SEM) with energy disperse spectroscopy (EDS), mechanical testing, electrochemical testing and plate-count method in order to reveal the effect of the extrusion process. XRD, OM and SEM results showed that the extrusion process did not change the phase constitute but refined the grain size and Ti 2 Cu particle significantly. Ti-Cu(E) alloys exhibited higher hardness and compressive yield strength than Ti-Cu(S) alloys due to the fine grain and Ti 2 Cu particles. With the consideration of the total compressive strain, it was suggested that the extrusion process could improve the ductility of Ti-Cu alloy(S) alloys. Electrochemical results have indicated that the extrusion process improved the corrosion resistance of Ti-Cu(S) alloys. Plate-count method displayed that both Ti-Cu(S) and Ti-Cu(E) exhibited strong antibacterial activity (> 99%) against S. aureus. All these results demonstrated that hot forming processing, such as the extrusion in this study, refined the microstructure and densified the alloy, in turn improved the ductility and strength as well as anticorrosion properties without reduction in antibacterial properties. - Highlights: • Hot extrusion refined the grain size and Ti 2 Cu phase significantly. • Hot extrusion increased the mechanical properties and the corrosion resistance. • The antibacterial properties was not affected by the hot process.

  5. Physical properties of nanorods

    Energy Technology Data Exchange (ETDEWEB)

    Krahne, Roman; George, Chandramohan [Istituto Italiano di Tecnologia, Genoa (Italy). Nanostructures; Manna, Liberato [Istituto Italiano di Tecnologia, Genoa (Italy). Nanochemistry; Morello, Giovanni [CNR, Lecce (Italy). Nanoscience Institute; Figuerola, Albert [Barcelona Univ. (Spain). Inst. de Nanociencia i Nanotecnologia; Deka, Sasanka [Delhi Univ. (India). Dept. of Chemistry

    2013-06-01

    Inorganic nanoparticles are among the most investigated objects nowadays, both in fundamental science and in various technical applications. In this book the physical properties of nanowires formed by nanoparticles with elongated shape, i.e. rod-like or wire-like, are described. The transition in the physical properties is analyzed for nanorods and nanowires consisting of spherical and rod-like nanoparticles. The physical properties of nanowires and elongated inorganic nanoparticles are reviewed too. The optical, electrical, magnetic, mechanical and catalytic properties of nanowires consisting of semiconductors, noble and various other metals, metal oxides properties and metal alloys are presented. The applications of nanorods and nanowires are discussed in the book.

  6. NIST/ASME Steam Properties Database

    Science.gov (United States)

    SRD 10 NIST/ASME Steam Properties Database (PC database for purchase)   Based upon the International Association for the Properties of Water and Steam (IAPWS) 1995 formulation for the thermodynamic properties of water and the most recent IAPWS formulations for transport and other properties, this updated version provides water properties over a wide range of conditions according to the accepted international standards.

  7. Nuclear materials thermo-physical property database and property analysis using the database

    International Nuclear Information System (INIS)

    Jeong, Yeong Seok

    2002-02-01

    It is necessary that thermo-physical properties and understand of nuclear materials for evaluation and analysis to steady and accident states of commercial and research reactor. In this study, development of nuclear materials thermo-properties database and home page. In application of this database, it is analyzed of thermal conductivity, heat capacity, enthalpy, and linear thermal expansion of fuel and cladding material and compared thermo-properties model in nuclear fuel performance evaluation codes with experimental data in database. Results of compare thermo-property model of UO 2 fuel and cladding major performance evaluation code, both are similar

  8. Thermophysical Properties Program

    Science.gov (United States)

    1997-01-01

    This is a computer generated model of a ground based casting. The objective of the therophysical properties program is to measure thermal physical properties of commercial casting alloys for use in computer programs that predict soldification behavior. This could reduce trial and error in casting design and promote less scrap, sounder castings, and less weight. In order for the computer models to reliably simulate the details of industrial alloy solidification, the input thermophysical property data must be absolutely reliable. Recently Auburn University and TPRL Inc. formed a teaming relationship to establish reliable measurement techniques for the most critical properties of commercially important alloys: transformation temperatures, thermal conductivity, electrical conductivity, specific heat, latent heat, density, solid fraction evolution, surface tension, and viscosity. A new initiative with the American Foundrymens Society has been started to measure the thermophysical properties of commercial ferrous and non-ferrous casting alloys and make the thermophysical property data widely available. Development of casting processes for the new gamma titanium aluminide alloys as well as existing titanium alloys will remain a trial-and-error procedure until accurate thermophysical properties can be obtained. These molten alloys react with their containers on earth and change their composition - invalidating the measurements even while the data are being acquired in terrestrial laboratories. However, measurements on the molten alloys can be accomplished in space using freely floating droplets which are completely untouched by any container. These data are expected to be exceptionally precise because of the absence of impurity contamination and buoyancy convection effects. Although long duration orbital experiments will be required for the large scale industrial alloy measurement program that results from this research, short duration experiments on NASA's KC-135 low

  9. PHYSICOCHEMICAL PROPERTY CALCULATIONS

    Science.gov (United States)

    Computer models have been developed to estimate a wide range of physical-chemical properties from molecular structure. The SPARC modeling system approaches calculations as site specific reactions (pKa, hydrolysis, hydration) and `whole molecule' properties (vapor pressure, boilin...

  10. Using nonlinearity and spatiotemporal property modulation to control effective structural properties: dynamic rods

    DEFF Research Database (Denmark)

    Thomsen, Jon Juel; Blekhman, Iliya I.

    2007-01-01

    What are the effective properties of a generally nonlinear material or structure, whose local properties are modulated in both space and time? It has been suggested to use spatiotemporal modulation of structural properties to create materials and structures with adjustable effective properties......, and to call these dynamic materials or spatiotemporal composites. Also, according to theoretical predictions, structural nonlinearity enhances the possibilities of achieving specific effective properties. For example, with an elastic rod having cubical elastic nonlinearities, it seems possible to control......, and exemplified. Then simple approximate analytical expressions are derived for the effective wave speed and natural frequencies for one-dimensional wave propagation in a nonlinear elastic rod, where the spatiotemporal modulation is imposed as a high-frequency standing wave, supposed to be given. Finally the more...

  11. Optimization of mechanical properties, biocorrosion properties and antibacterial properties of as-cast Ti-Cu alloys.

    Science.gov (United States)

    Zhang, Erlin; Ren, Jing; Li, Shengyi; Yang, Lei; Qin, Gaowu

    2016-10-21

    Ti-Cu sintered alloys have shown good antibacterial abilities. However, the sintered method (powder metallurgy) is not convenient to produce devices with a complex structure. In this paper, Ti-Cu alloys with 2.0, 3.0 and 4.0 wt.% Cu were prepared in an arc melting furnace and subjected to different heat treatments: solid solution and ageing, to explore the possibility of preparing an antibacterial Ti-Cu alloy by a casting method and to examine the effect of Cu content. Phase identification was conducted on an XRD diffraction meter, and the microstructure was observed by a metallographic microscope, a scanning electron microscope (SEM) with energy disperse spectroscopy (EDS) and transmission electron microscopy (TEM). Microhardness and the compressive property of Ti-Cu alloys were tested, and the corrosion resistance and antibacterial activity were assessed in order to investigate the effect of the Cu content. Results showed that the as-cast Ti-Cu alloys exhibited a very low antibacterial rate against Staphylococcus aureus (S. aureus). Heat treatment improved the antibacterial rate significantly, especially after a solid and ageing treatment (T6). Antibacterial rates as high as 90.33% and 92.57% were observed on Ti-3Cu alloy and Ti-4Cu alloy, respectively. The hardness, the compressive yield strength, the anticorrosion resistance and the antibacterial rate of Ti-Cu alloys increased with an increase of Cu content in all conditions. It was demonstrated that homogeneous distribution and a fine Ti 2 Cu phase played a very important role in the mechanical property, anticorrosion and antibacterial properties. Furthermore, it should be pointed out that the Cu content should be at least 3 wt.% to obtain good antibacterial properties (>90% antibacterial rate) as well as satisfactory mechanical properties.

  12. The trespasses of property law.

    Science.gov (United States)

    Wall, Jesse

    2014-01-01

    The purpose of this article is to identify a limit to the appropriate application of property law to the use and storage of bodily material. I argue here that property law ought to be limited to protecting 'contingent rights' and that recent cases where property rights have been recognised in semen represent the application of property law beyond this limit. I also suggest how the law ought to develop in order to avoid the overextensive use of property law.

  13. 25 CFR 900.52 - What type of property is the property management system required to track?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What type of property is the property management system...-DETERMINATION AND EDUCATION ASSISTANCE ACT Standards for Tribal or Tribal Organization Management Systems Property Management System Standards § 900.52 What type of property is the property management system...

  14. Thermochemical properties

    International Nuclear Information System (INIS)

    Brewer, L.; Lamoreaux, R.H.; California Univ., Berkeley

    1980-01-01

    A critical review of thermodynamic properties of Mo-compounds is presented. Binary Mo-compounds, elemental Mo and binary Mo-alloys are considered. The thermodynamic properties include heat capacity enthalpy, gibbs free energy, entropy, vapor pressure, partial free energy of solution. Many values are given in the table form and some values are given in the text. The data used and the procedures applied to test the data are indicated in the text

  15. Handbook of nanomaterials properties

    CERN Document Server

    Luo, Dan; Schricker, Scott R; Sigmund, Wolfgang; Zauscher, Stefan

    2014-01-01

    Nanomaterials attract tremendous attention in recent researches. Although extensive research has been done in this field it still lacks a comprehensive reference work that presents data on properties of different Nanomaterials. This Handbook of Nanomaterials Properties will be the first single reference work that brings together the various properties with wide breadth and scope.

  16. Property in Nonhuman Primates

    Science.gov (United States)

    Brosnan, Sarah F.

    2011-01-01

    Property is rare in most nonhuman primates, most likely because their lifestyles are not conducive to it. Nonetheless, just because these species do not frequently maintain property does not mean that they lack the propensity to do so. Primates show respect for possession, as well as behaviors related to property, such as irrational decision…

  17. Swiss Property kontor = Offices of Swiss Property / kommenteerinud Tõnis Sõõrumaa

    Index Scriptorium Estoniae

    2015-01-01

    Swiss Property kontoriruumid Tallinnas Rotermanni 8. Sisekujunduse autorid Kätlin Ölluk, Tiina Kesküla, Katy Seppel, Aet Kiivet, Liina Rohtlaan, Marita Mätas, Lilian Esing, Kristin Boginski (Swiss Property); arhitektid Yoko Azukawa, Hanno Grossschmidt, Tomomi Hayashi

  18. Thermophysical properties

    Energy Technology Data Exchange (ETDEWEB)

    Kayser, R.F.

    1993-01-01

    Numerous fluids have been identified as promising alternative refrigerants, but much of the information needed to predict their behavior as pure fluids and as components in mixtures does not exist. In particular, reliable thermophysical properties data and models are needed to predict the performance of the new refrigerants in heating and cooling equipment and to design and optimize equipment to be reliable and energy efficient. The objective of this project is to provide highly accurate, selected thermophysical properties data for Refrigerants 32, 123, 124, and 125, and to use these data to fit simple and complex equations of state and detailed transport property models. The new data will fill gaps in the existing data sets and resolve the problems and uncertainties that exist in and between the data sets. This report describes the progress made during the fourth quarter of this fifteen-month project, which was initiated in late January, 1992.

  19. Electronic transport properties

    International Nuclear Information System (INIS)

    Young, W.H.

    1985-01-01

    The theory of the electron transport properties of liquid alkali metals is described. Conductivity coefficients, Boltzmann theory, Ziman theory, alkali form factors, Ziman theory and alkalis, Faber-Ziman alloy theory, Faber-Ziman theory and alkali-alkali methods, status of Ziman theory, and other transport properties, are all discussed. (UK)

  20. 44 CFR 13.31 - Real property.

    Science.gov (United States)

    2010-10-01

    ... original purchase to the fair market value of the property. However, in those situations where a grantee or... purchase of the real property to the current fair market value of the property. ... LOCAL GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards § 13.31 Real property. (a...

  1. Liquid hydrogen properties

    International Nuclear Information System (INIS)

    Choi, Jung Woon; Kim, Y. J.; Lee, K. H.; Kim, H. I.; Han, K. Y.; Park, J.H.

    2004-03-01

    The purpose of this report is to provide the input data, whose characteristic is thermodynamic and transport, in the form of equation for the thermo-hydraulic calculations using hydrogen as a working substance. The considered data in this report are particularly focused on the properties of para-hydrogen and of equilibrium-hydrogen around the working temperature range of the HANARO-CNS. The discussed properties of hydrogen are, in turn, the pressure of saturated vapors, the density, the heat of vaporization, thermal conductivity, viscosity, and heat capacity. Several equations to fit the above-mentioned experimental data allow calculating the various properties of liquid hydrogen with high accuracy at all considered temperatures

  2. Properties and CAPE

    DEFF Research Database (Denmark)

    Gani, Rafiqul; O'Connell, J.P.

    2001-01-01

    The role of properties in the solution of Computer Aided Process Engineering (CAPE) problems is described in terms of current trend, future challenges and important issues. Three distinct roles of properties in CAFE have been identified - a service role, a service plus advice role and a service......, advice plus solve role. The CAFE problems solved under each of these roles are described together with simple illustrative examples. Finally, the paper describes how some of the future problems related to integration of synthesis, design and control might be dealt with efficiently and reliably through co......-operative CAFE and properties methodologies. (C) 2001 Elsevier Science Ltd. All rights reserved....

  3. Characterization of concrete properties from dielectric properties using ground penetrating radar

    International Nuclear Information System (INIS)

    Lai, W.L.; Kou, S.C.; Tsang, W.F.; Poon, C.S.

    2009-01-01

    This paper presents the experimental results of a study of the relationships between light-weight (LWAC) and normal aggregate concrete (NAC) properties, as well as radar wave properties that are derived by using ground penetrating radar (GPR). The former (LWAC) refers to compressive strength, apparent porosity and saturated density, while the latter (NAC) refers to real part of dielectric permittivity (ε' or real permittivity) and wave energy level (E). Throughout the test period of the newly cast concrete cured for 90 days, the above mentioned material properties gradually changed which can be attributed to the effects of cement hydration, different types of aggregates and initial water to binder ratios. A number of plots describing various properties of concrete such as dielectric, strength and porosity perspectives were established. From these plots, we compare the characteristics of how much and how fast free water was turned to absorbed water in LWAC and NAC. The underlying mechanisms and a mechanistic model are then developed.

  4. 7 CFR 654.16 - Property management.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Property management. 654.16 Section 654.16 Agriculture... Property management. Sponsor(s) are to: (a) Use real property acquired in whole or in part with Federal... property (34 CFR part 256). (c) Establish, adopt, and comply with a property management system which meets...

  5. Property Rights and Finance

    OpenAIRE

    Simon Johnson; John McMillan; Christopher Woodruff

    2002-01-01

    Which is the tighter constraint on private sector investment: weak property rights or limited access to external finance? From a survey of new firms in post-communist countries, we find that weak property rights discourage firms from reinvesting their profits, even when bank loans are available. Where property rights are relatively strong, firms reinvest their profits; where they are relatively weak, entrepreneurs do not want to invest from retained earnings.

  6. Elektřina z panelů nebo teplá voda ze střešních kolektorů

    Czech Academy of Sciences Publication Activity Database

    Jiříček, I.; Kolovratník, M.; Macák, J.; Pohořelý, Michael; Diblíková, L.; Janda, V.

    2009-01-01

    Roč. 103, č. 7 (2009), s. 601-604 ISSN 0009-2770 Institutional research plan: CEZ:AV0Z40720504 Keywords : photovoltaic panels * solar collectors Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 0.717, year: 2009

  7. Effect of extrusion processing on the microstructure, mechanical properties, biocorrosion properties and antibacterial properties of Ti-Cu sintered alloys.

    Science.gov (United States)

    Zhang, Erlin; Li, Shengyi; Ren, Jing; Zhang, Lan; Han, Yong

    2016-12-01

    Ti-Cu sintered alloys, Ti-Cu(S) alloy, have exhibited good anticorrosion resistance and strong antibacterial properties, but low ductility in previous study. In this paper, Ti-Cu(S) alloys were subjected to extrusion processing in order to improve the comprehensive property. The phase constitute, microstructure, mechanical property, biocorrosion property and antibacterial activity of the extruded alloys, Ti-Cu(E), were investigated in comparison with Ti-Cu(S) by X-ray diffraction (XRD), optical microscopy (OM), scanning electronic microscopy (SEM) with energy disperse spectroscopy (EDS), mechanical testing, electrochemical testing and plate-count method in order to reveal the effect of the extrusion process. XRD, OM and SEM results showed that the extrusion process did not change the phase constitute but refined the grain size and Ti2Cu particle significantly. Ti-Cu(E) alloys exhibited higher hardness and compressive yield strength than Ti-Cu(S) alloys due to the fine grain and Ti2Cu particles. With the consideration of the total compressive strain, it was suggested that the extrusion process could improve the ductility of Ti-Cu alloy(S) alloys. Electrochemical results have indicated that the extrusion process improved the corrosion resistance of Ti-Cu(S) alloys. Plate-count method displayed that both Ti-Cu(S) and Ti-Cu(E) exhibited strong antibacterial activity (>99%) against S. aureus. All these results demonstrated that hot forming processing, such as the extrusion in this study, refined the microstructure and densified the alloy, in turn improved the ductility and strength as well as anticorrosion properties without reduction in antibacterial properties. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. Calibrated Properties Model

    International Nuclear Information System (INIS)

    Ghezzehej, T.

    2004-01-01

    The purpose of this model report is to document the calibrated properties model that provides calibrated property sets for unsaturated zone (UZ) flow and transport process models (UZ models). The calibration of the property sets is performed through inverse modeling. This work followed, and was planned in, ''Technical Work Plan (TWP) for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654], Sections 1.2.6 and 2.1.1.6). Direct inputs to this model report were derived from the following upstream analysis and model reports: ''Analysis of Hydrologic Properties Data'' (BSC 2004 [DIRS 170038]); ''Development of Numerical Grids for UZ Flow and Transport Modeling'' (BSC 2004 [DIRS 169855]); ''Simulation of Net Infiltration for Present-Day and Potential Future Climates'' (BSC 2004 [DIRS 170007]); ''Geologic Framework Model'' (GFM2000) (BSC 2004 [DIRS 170029]). Additionally, this model report incorporates errata of the previous version and closure of the Key Technical Issue agreement TSPAI 3.26 (Section 6.2.2 and Appendix B), and it is revised for improved transparency

  9. Atomic transport properties

    International Nuclear Information System (INIS)

    Freyss, M.

    2015-01-01

    As presented in the first chapter of this book, atomic transport properties govern a large panel of nuclear fuel properties, from its microstructure after fabrication to its behaviour under irradiation: grain growth, oxidation, fission product release, gas bubble nucleation. The modelling of the atomic transport properties is therefore the key to understanding and predicting the material behaviour under irradiation or in storage conditions. In particular, it is noteworthy that many modelling techniques within the so-called multi-scale modelling scheme of materials make use of atomic transport data as input parameters: activation energies of diffusion, diffusion coefficients, diffusion mechanisms, all of which are then required to be known accurately. Modelling approaches that are readily used or which could be used to determine atomic transport properties of nuclear materials are reviewed here. They comprise, on the one hand, static atomistic calculations, in which the migration mechanism is fixed and the corresponding migration energy barrier is calculated, and, on the other hand, molecular dynamics calculations and kinetic Monte-Carlo simulations, for which the time evolution of the system is explicitly calculated. (author)

  10. History of an Issue – Property

    Directory of Open Access Journals (Sweden)

    Niadi-Corina CERNICA,

    2012-12-01

    Full Text Available Property becomes a issue of philosophy and political reflections owing to Platon`s “Republic”. In this dialogue, the military class of his political Utopia is obliged not to possess goods. So that the Republic is more important than their interests. For this reason the military class is obliged not to have family. The interest of Republic is more important than the individual interests. David Hume thinks the right comes from the property (the two concepts have developed correspondingly. Property is a result of human natural needs. The needs are complied with the property. Human nature implies the property. John Locke affirms property comes from work, so it is a moral right. J.J. Rousseau thinks the property is the origin of social and political inequality, in contrast with natural equality of human beings. Karl Marx affirms property is the origin of alienation. Property is the origin of estrangement of human beings from themselves. “Marxist humanism” implies to regain the dignity of work and the social dignity. Other philosophers think the property is a warrant of freedom. Property was tied to social interests (Platon, to morality (Thomas Morus, John Locke, to human nature (J. J. Rousseau, David Hume, Karl Marx and freedom.

  11. Quantum property testing

    NARCIS (Netherlands)

    Buhrman, H.; Fortnow, L.; Newman, I.; Röhrig, H.

    2008-01-01

    A language L has a property tester if there exists a probabilistic algorithm that given an input x queries only a small number of bits of x and distinguishes the cases as to whether x is in L and x has large Hamming distance from all y in L. We define a similar notion of quantum property testing and

  12. The amount of 137Cs in chosen parts of food chains from localities in the East of Slovakia

    International Nuclear Information System (INIS)

    Cipakova, A.

    2005-01-01

    The aim of this study was to compare the amount of radiocaesium in chosen parts of food chains from localities in the Eastern Slovakia. Prevailing part of radiocaesium is in the upper layer of soils and specific activity of 137 Cs in the first layer for locality Stara Voda in 2000 achieved 152.4 Bq/kg 1 . On the base of results from modified Tessier sequential extraction method we determined that more than 50 % of this radionuclide is in the soil in not extractable fraction. From studied species of mushrooms the highest value was determined in sample of Rozites caperata the and specific activity achieved 1822.0 Bq/kg 1 d. w. The aim of our study was to determine the amount of caesium in chosen parts of food chains from localities in Eastern Slovakia for period 2000-2004. On the base of obtained results we can conclude that radiocaesium migrates vertically in soils very slowly and prevailing part of caesium is in the upper layer. Prevailing part of radiocaesium is in the not extractable fraction. Extremely low concentration of caesium in soil solution is the factor limiting caesium uptake by the root systems, too. Mushrooms are characterised by high ability to accumulate radiocaesium. (authors)

  13. Integrated river basin management of Južna Morava River

    Directory of Open Access Journals (Sweden)

    Borisavljević Ana

    2012-01-01

    Full Text Available In the last decade in particular, Serbia encountered the problems of drinking water supply, which influenced the perception of professional public about the water crisis but also started more intensive work on water resource perseverance as well as the implementation of European Water Directive. One of the main demands of the Directive focuses on integrated river basin management (IRBM, which is a complex and a large task. The need to collect data on water quality and quantity, specific and key issues of water management in Južna Morava river basin, pressures on river ecosystem, flood risks and erosion problems, cross-border issues, socioeconomic processes, agricultural development as well as protected areas, and also to give the measures for solving problems and pressures recognized in the basin, is undisputable. This paper focuses on detailed analysis of specific pressures on river ecosystem and composition of recommendations for integrated management of Južna Morava river basin as cross-border river basin, taking into the account European experiences in IRBM. [Projekat Ministarstva nauke Republike Srbije, br. 43007: Istraživanje klimatskih promena na životnu sredinu - praćenje uticaja, adaptacija i ublažavanje, podprojekat br. 9: Učestalost bujičnih poplava, degradacija zemljišta i voda kao posledica globalnih promena

  14. Atomistic Properties of Solids

    CERN Document Server

    Sirdeshmukh, Dinker B; Subhadra, K G

    2011-01-01

    The book deals with atomistic properties of solids which are determined by the crystal structure, interatomic forces and atomic displacements influenced by the effects of temperature, stress and electric fields. The book gives equal importance to experimental details and theory. There are full chapters dedicated to the tensor nature of physical properties, mechanical properties, lattice vibrations, crystal structure determination and ferroelectricity. The other crystalline states like nano-, poly-, liquid- and quasi crystals are discussed. Several new topics like nonlinear optics and the Rietveld method are presented in the book. The book lays emphasis on the role of symmetry in crystal properties. Comprehensiveness is the strength of the book; this allows users at different levels a choice of chapters according to their requirements.

  15. Property law in Jersey

    OpenAIRE

    MacLeod, Rebecca Frances

    2012-01-01

    Jersey law, and within it Jersey property law, has received little academic attention. This thesis seeks to examine, and provide a systematic account of, the Jersey law of property. Specific aspects of substantive law are explored. From these, general observations about the nature and structure of property law are made. Unsurprisingly, given the small size of the island, Jersey has a relatively limited amount of indigenous legal material to offer, much of it in French. Inevitab...

  16. Soil/Rock Properties Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Soil/Rock Properties LaboratoryLocation: Spokane SiteThe Soil/Rock Properties Laboratory is contained in the soils bay, a 4,700 sq. ft. facility that provides space...

  17. How Are Property Investment Returns Determined? : Estimating the Micro-Structure of Asset Prices, Property Income, and Discount Rates

    OpenAIRE

    Shimizu, Chihiro

    2014-01-01

    How exactly should one estimate property investment returns? Investors in property aim to maximize capital gains from price increases and income generated by the property. How are the returns on investment in property determined based on its characteristics, and what kind of market characteristics does it have? Focusing on the Tokyo commercial property market and residential property market, the purpose of this paper was to break down and measure the micro-structure of property investment ret...

  18. RaptorX-Property: a web server for protein structure property prediction.

    Science.gov (United States)

    Wang, Sheng; Li, Wei; Liu, Shiwang; Xu, Jinbo

    2016-07-08

    RaptorX Property (http://raptorx2.uchicago.edu/StructurePropertyPred/predict/) is a web server predicting structure property of a protein sequence without using any templates. It outperforms other servers, especially for proteins without close homologs in PDB or with very sparse sequence profile (i.e. carries little evolutionary information). This server employs a powerful in-house deep learning model DeepCNF (Deep Convolutional Neural Fields) to predict secondary structure (SS), solvent accessibility (ACC) and disorder regions (DISO). DeepCNF not only models complex sequence-structure relationship by a deep hierarchical architecture, but also interdependency between adjacent property labels. Our experimental results show that, tested on CASP10, CASP11 and the other benchmarks, this server can obtain ∼84% Q3 accuracy for 3-state SS, ∼72% Q8 accuracy for 8-state SS, ∼66% Q3 accuracy for 3-state solvent accessibility, and ∼0.89 area under the ROC curve (AUC) for disorder prediction. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

  19. Real Property Tax - 2017

    Data.gov (United States)

    Montgomery County of Maryland — This data represents all of the County’s residential real estate properties and all of the associated tax charges and credits with that property processed at the...

  20. Real Property Tax - 2016

    Data.gov (United States)

    Montgomery County of Maryland — This data represents all of the County’s residential real estate properties and all of the associated tax charges and credits with that property processed at the...

  1. Thermophysical properties of stainless steels

    International Nuclear Information System (INIS)

    Kim, C.S.

    1975-09-01

    Recommended values of the thermodynamic and transport properties of stainless steels Type 304L and Type 316L are given for temperatures from 300 to 3000 0 K. The properties in the solid region were obtained by extrapolating available experimental data to the melting range, while appropriate correlations were used to estimate the properties in the liquid region. The properties evaluated include the enthalpy, entropy, specific heat, vapor pressure, density, thermal expansion coefficient, thermal conductivity, thermal diffusivity, and viscosity. (9 fig, 11 tables)

  2. Making and Breaking Property Rights

    DEFF Research Database (Denmark)

    Justesen, Mogens Kamp

    2015-01-01

    This paper analyzes why some governments protect property rights while others do not. Although institutional constraints may affect government incentives to protect property rights, the paper emphasizes that different political institutions have dissimilar effects. Coalition institutions that make...... governments accountable to large groups in society are particularly important, whereas division of powers between veto players is hypothesized to have more ambiguous effects on property rights. Empirical analyses of panel data support the proposition that coalition institutions matter for property-rights...

  3. Analysis of Hydrologic Properties Data

    Energy Technology Data Exchange (ETDEWEB)

    H. H. Liu

    2003-04-03

    This Model Report describes the methods used to determine hydrologic properties based on the available field data from the unsaturated zone (UZ) at Yucca Mountain, Nevada, and documents validation of the active fracture model (AFM). This work was planned in ''Technical Work Plan (TWP) for: Performance Assessment Unsaturated Zone'' (BSC 2002 [160819], Sections 1.10.2, 1.10.3, and 1.10.8). Fracture and matrix properties are developed by analyzing available survey data from the Exploratory Studies Facility (ESF), Cross Drift for Enhanced Characterization of Repository Block (ECRB), and/or boreholes; air injection testing data from surface boreholes and from boreholes in the ESF; and data from laboratory testing of core samples. The AFM is validated on the basis of experimental observations and theoretical developments. This report is a revision of an Analysis Model Report, under the same title, as a scientific analysis with Document Identifier number ANL-NBS-HS-000002 (BSC 2001 [159725]) that did not document activities to validate the AFM. The principal purpose of this work is to provide representative uncalibrated estimates of fracture and matrix properties for use in the model report ''Calibrated Properties Model'' (BSC 2003 [160240]). The present work also provides fracture geometry properties for generating dual permeability grids as documented in the Scientific Analysis Report, ''Development of Numerical Grids for UZ Flow and Transport Modeling'' (BSC 2003 [160109]). The resulting calibrated property sets and numerical grids from these reports will be used in the Unsaturated Zone Flow and Transport Process Model (UZ Model), and Total System Performance Assessment (TSPA) models. The fracture and matrix properties developed in this Model Report include: (1) Fracture properties (frequency, permeability, van Genuchten a and m parameters, aperture, porosity, and interface area) for each UZ Model layer; (2

  4. 76 FR 2001 - Government Property

    Science.gov (United States)

    2011-01-12

    ... change ``approval of the NASA Industrial Property Officer to ``approval of the Plant Clearance Officer... equipment), demolition, or management of real property. 0 3. Subpart 1845.3 is added to read as follows...-Government) use of any NASA equipment. 1845.302 Use of Government property on contracts with foreign...

  5. Girdler-sulfide process physical properties

    International Nuclear Information System (INIS)

    Neuburg, H.J.; Atherley, J.F.; Walker, L.G.

    1977-05-01

    Physical properties of pure hydrogen sulfide and of gaseous and liquid solutions of the H 2 S-H 2 O system have been formulated. Tables for forty-nine different properties in the pressure and temperature range of interest to the Girdler-Sulfide (GS) process for heavy water production are given. All properties are presented in SI units. A computer program capable of calculating properties of the pure components as well as gaseous mixtures and liquid solutions at saturated and non-saturated conditions is included. (author)

  6. 36 CFR 1207.31 - Real property.

    Science.gov (United States)

    2010-07-01

    ... Section 1207.31 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION GENERAL... original purchase to the fair market value of the property. However, in those situations where a grantee or... purchase of the real property to the current fair market value of the property. ...

  7. Land degradation and property regimes

    Science.gov (United States)

    Paul M. Beaumont; Robert T. Walker

    1996-01-01

    This paper addresses the relationship between property regimes and land degradation outcomes, in the context of peasant agriculture. We consider explicitly whether private property provides for superior soil resource conservation, as compared to common property and open access. To assess this we implement optimization algorithms on a supercomputer to address resource...

  8. Evaluation and Future Direction of Intellectual Property Strategy - Setting out a new intellectual property policy - (Japanese)

    OpenAIRE

    KUGAI Takashi

    2010-01-01

    1. An intellectual property strategy is a policy aimed at improving the international competitiveness of industry and reinvigorating the economy through the creation, protection, and greater use of intellectual property. 2. The realization of IP policies conventionally considered difficult to implement and greater awareness of intellectual property at all levels of society, as demonstrated the establishment of Intellectual Property High Courts that exclusively and solely handle intellectual p...

  9. 18 CFR 367.58 - Property record system required for service company property.

    Science.gov (United States)

    2010-04-01

    ... to show the nature of each addition to or retirement of service company property, the related total... required for service company property. 367.58 Section 367.58 Conservation of Power and Water Resources... COMPANY ACT OF 2005, FEDERAL POWER ACT AND NATURAL GAS ACT UNIFORM SYSTEM OF ACCOUNTS FOR CENTRALIZED...

  10. Profiling property criminals in Turkey.

    Science.gov (United States)

    Içli, Tülin Günsen; Seydioğullari, Ibrahim; Tatlidil, Hüseyin; Coban, Sevgi; Sever, Hanifi; Süeroğlu, Unal

    2010-08-01

    The main aim of this research is to develop a profile of a thief. Through a comprehensive survey of property crime suspects arrested in the city of Ankara between 2004 and 2005, the authors have attempted to determine the socioeconomic qualities of those involved in these forms of property crimes. Results of the study show that property crimes are a consequence of low education, lack of occupational skills, and alcohol and drug addiction on the part of the offenders. Because of these factors, theft becomes a way of life for offenders after their first act of property crime.

  11. Thermophysical properties of uranium dioxide

    International Nuclear Information System (INIS)

    Fink, J.K.

    2000-01-01

    Experimental data on thermodynamic and transport properties of solid and liquid UO 2 have been reviewed and analyzed to obtain consistent equations for the thermophysical properties. Thermodynamic properties that have been assessed include enthalpy, heat capacity, enthalpy of fusion, thermal expansion, density, surface tension and vapor pressure. Transport properties that have been assessed are thermal diffusivity, thermal conductivity, viscosity, emissivity and optical constants. The assessments include a review of the experiments and data, review of previous recommendations, analysis of data to obtain new recommendations, determination of uncertainties in the recommended values, and comparisons of new recommendations with data and previous recommendations

  12. Regressional Estimation of Cotton Sirospun Yarn Properties from Fibre Properties

    Directory of Open Access Journals (Sweden)

    Bedez Üte Tuba

    2014-09-01

    Full Text Available In this paper, it is aimed at determining the equations and models for estimating the sirospun yarn quality characteristics from the yarn production parameters and cotton fibre properties, which are focused on fibre bundle measurements represented by HVI (high volume instrument. For this purpose, a total of 270 sirospun yarn samples were produced on the same ring spinning machine under the same conditions at Ege University, by using 11 different cotton blends and three different strand spacing settings, in four different yarn counts and in three different twist coefficients. The sirospun yarn and cotton fibre property interactions were investigated by correlation analysis. For the prediction of yarn quality characteristics, multivariate linear regression methods were performed. As a result of the study, equations were generated for the prediction of yarn tenacity, breaking elongation, unevenness and hairiness by using fibre and yarn properties. After the goodness of fit statistics, very large determination coefficients (R2 and adjusted R2 were observed.

  13. Anisotropic local physical properties of human dental enamel in comparison to properties of some common dental filling materials.

    Science.gov (United States)

    Raue, Lars; Hartmann, Christiane D; Rödiger, Matthias; Bürgers, Ralf; Gersdorff, Nikolaus

    2014-11-01

    A major aspect in evaluating the quality of dental materials is their physical properties. Their properties should be a best fit of the ones of dental hard tissues. Manufacturers give data sheets for each material. The properties listed are characterized by a specific value. This assumes (but does not prove) that there is no direction dependence of the properties. However, dental enamel has direction-dependent properties which additionally vary with location in the tooth. The aim of this paper is to show the local direction dependence of physical properties like the elastic modulus or the thermal expansion in dental hard tissues. With this knowledge the 'perfect filling/dental material' could be characterized. Enamel sections of ∼400-500 μm thickness have been cut with a diamond saw from labial/buccal to palatal/lingual (canine, premolar and molar) and parallel to labial (incisor). Crystallite arrangements have been measured in over 400 data points on all types of teeth with x-ray scattering techniques, known from materials science. X-ray scattering measurements show impressively that dental enamel has a strong direction dependence of its physical properties which also varies with location within the tooth. Dental materials possess only little or no property direction dependence. Therefore, a mismatch was found between enamel and dental materials properties. Since dental materials should possess equal (direction depending) properties, worthwhile properties could be characterized by transferring the directional properties of enamel into a property 'wish list' which future dental materials should fulfil. Hereby the 'perfect dental material' can be characterized.

  14. Intellectual Property Rights Management

    DEFF Research Database (Denmark)

    Alkærsig, Lars; Beukel, Karin; Reichstein, Toke

    Intellectual Property Rights Management explores how the entire toolbox of intellectual property (IP) protection and management are successfully combined and how firms generate value from IP. In particular, this book provides a framework of archetypes which firms will be able to self...

  15. Calibrated Properties Model

    International Nuclear Information System (INIS)

    Ahlers, C.; Liu, H.

    2000-01-01

    The purpose of this Analysis/Model Report (AMR) is to document the Calibrated Properties Model that provides calibrated parameter sets for unsaturated zone (UZ) flow and transport process models for the Yucca Mountain Site Characterization Project (YMP). This work was performed in accordance with the ''AMR Development Plan for U0035 Calibrated Properties Model REV00. These calibrated property sets include matrix and fracture parameters for the UZ Flow and Transport Model (UZ Model), drift seepage models, drift-scale and mountain-scale coupled-processes models, and Total System Performance Assessment (TSPA) models as well as Performance Assessment (PA) and other participating national laboratories and government agencies. These process models provide the necessary framework to test conceptual hypotheses of flow and transport at different scales and predict flow and transport behavior under a variety of climatic and thermal-loading conditions

  16. Physical properties of solids

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Research at ORNL into the physical properties of solids is described. Topics covered include: optical, electrical, and magnetic properties of magnesium oxide; ionic conductivity and superconductivity; surface physics and catalysis; defects and impurities in insulating crystals; photovoltaic conversion of solar energy; and fracture studies

  17. The Idea of Property

    Science.gov (United States)

    Starr, Isidore

    1987-01-01

    Reviews case law, constitutional principles, and early American writings which deal with the idea of private property. Concludes that, in the future, the issues of laissez-fare capitalism, government regulation, and the welfare state will require further clarification of our conception of private property. (JDH)

  18. Physical properties of solids

    Energy Technology Data Exchange (ETDEWEB)

    Wilkinson, M. K.; Young, Jr, F. W.

    1977-10-01

    Research at ORNL into the physical properties of solids is described. Topics covered include: optical, electrical, and magnetic properties of magnesium oxide; ionic conductivity and superconductivity; surface physics and catalysis; defects and impurities in insulating crystals; photovoltaic conversion of solar energy; and fracture studies. (GHT)

  19. Material properties characterization - concrete

    International Nuclear Information System (INIS)

    England, G.L.; MacLeod, J.S.

    1978-01-01

    A review is presented of the six contributions in the SMiRT 4 conference to Session H5 on structural analysis of prestressed concrete reactor pressure vessels. These relate to short term stress-strain aspects of concrete loaded beyond the linear range in uniaxial and biaxial stress fields, to some time and temperature dependent properties of concrete at working stress levels, and to a programme of strain-gauge testing for the assessment of concrete properties. From the information discussed, it is clear that there are difficulties in determining material properties for concrete, and these are summarised. (UK)

  20. FUZZY RINGS AND ITS PROPERTIES

    Directory of Open Access Journals (Sweden)

    Karyati Karyati

    2017-01-01

      One of algebraic structure that involves a binary operation is a group that is defined  an un empty set (classical with an associative binary operation, it has identity elements and each element has an inverse. In the structure of the group known as the term subgroup, normal subgroup, subgroup and factor group homomorphism and its properties. Classical algebraic structure is developed to algebraic structure fuzzy by the researchers as an example semi group fuzzy and fuzzy group after fuzzy sets is introduced by L. A. Zadeh at 1965. It is inspired of writing about semi group fuzzy and group of fuzzy, a research on the algebraic structure of the ring is held with reviewing ring fuzzy, ideal ring fuzzy, homomorphism ring fuzzy and quotient ring fuzzy with its properties. The results of this study are obtained fuzzy properties of the ring, ring ideal properties fuzzy, properties of fuzzy ring homomorphism and properties of fuzzy quotient ring by utilizing a subset of a subset level  and strong level  as well as image and pre-image homomorphism fuzzy ring.   Keywords: fuzzy ring, subset level, homomorphism fuzzy ring, fuzzy quotient ring

  1. Thermodynamic properties of cryogenic fluids

    CERN Document Server

    Leachman, Jacob; Lemmon, Eric; Penoncello, Steven

    2017-01-01

    This update to a classic reference text provides practising engineers and scientists with accurate thermophysical property data for cryogenic fluids. The equations for fifteen important cryogenic fluids are presented in a basic format, accompanied by pressure-enthalpy and temperature-entropy charts and tables of thermodynamic properties. It begins with a chapter introducing the thermodynamic relations and functional forms for equations of state, and goes on to describe the requirements for thermodynamic property formulations, needed for the complete definition of the thermodynamic properties of a fluid. The core of the book comprises extensive data tables and charts for the most commonly-encountered cryogenic fluids. This new edition sees significant updates to the data presented for air, argon, carbon monoxide, deuterium, ethane, helium, hydrogen, krypton, nitrogen and xenon. The book supports and complements NIST’s REFPROP - an interactive database and tool for the calculation of thermodynamic propertie...

  2. Calculation of thermophysical properties of sodium

    International Nuclear Information System (INIS)

    Fink, J.K.; Leibowitz, L.

    1981-01-01

    The thermodynamic properties of sodium previously recommended by Padilla have been updated. As much as possible, the approach described by Padilla has been used. For sodium in the states of saturated liquid and vapor, subcooled liquid and superheated vapor, the following thermodynamic properties were determined: enthalpy, heat capacity (constant pressure and constant volume), pressure, density, thermal-expansion coefficient, and compressibility (adiabatic and isothermal). In addition to the above properties, thermodynamic properties including heat of fusion, heat of vaporization, surface tension, speed of sound and transport properties of themal conductivity, thermal diffusivity, emissivity, and viscosity were determined for saturated sodium

  3. Intellectual property

    Directory of Open Access Journals (Sweden)

    MSc. Shpresa Ibrahimi

    2012-06-01

    Full Text Available Montenue, a distinct French scholar of intellectual property, has suggested that IP is a “tool which surprisingly helps a lot”, and this definition on science, arts, culture, since the 16th century. Now, what would be the definition of intellectual property for the 21st century? Apparently not a “strange” tool, but a necessary tool, primary for enriching human knowledge, and for the new world order, especially in the global market sphere. Intellectual property is an integral part of international trade, and its importance keeps increasing, since effective use of knowledge is increasingly influencing the economic prosperity of peoples. One may say that there is little originality in the creative sphere. Naturally, this originality can only be reflected by individuality and human identity in intellectual creativity The author rights in the Kosovo legislation is a novelty, a necessity of developing a creative environment in the fields of science, arts and industrial property. First and foremost, the individual benefit, which is secured by the author as the creator of the work, is a moral and material right. Secondly, there is a need for harmonization, not only of values for the creator, but also for the development of science, culture, increased competitive advantage, and the public sphere, as a benefit for the public health and security, and the fiscal policy. The deficiency one must record is with the Office for Copy Rights, which is to play a strong role in implementing and protecting copy rights and other related rights by licensing collective management agencies, imposing administrative fines, awareness raising, provision of information, and other capacity building and educative measures. Naturally, the enactment of good legislation is a system without any meaning or sense if not associated with the court practice. Any establishment of a legal system not pursued with enforcement mechanisms remains only in legal frameworks.

  4. Blockchain: properties and misconceptions

    Directory of Open Access Journals (Sweden)

    Daniel Conte de Leon

    2017-12-01

    Full Text Available Purpose - The purpose of this article is to clarify current and widespread misconceptions about the properties of blockchain technologies and to describe challenges and avenues for correct and trustworthy design and implementation of distributed ledger system (DLS or Technology (DLT. Design/methodology/approach - The authors contrast the properties of a blockchain with desired, however emergent, properties of a DLS, which is a complex and distributed system. They point out and justify, with facts and analysis, current misconceptions about the blockchain and DLSs. They describe challenges that these systems will need to address and possible solution avenues for achieving trustworthiness. Findings - Many of the statements that have appeared on the internet, news and academic articles, such as immutable ledger and exact copies, may be misleading. These are desired emergent properties of a complex system, not assured properties. It is well-known within the distributed systems and critical software community that it is extremely hard to prove that a complex system correctly and completely implements emergent properties. Further research and development for trustworthy DLS design and implementation is needed, both practical and theoretical. Research limitations/implications - This is the first known published attempt at describing current misconceptions about blockchain technologies. Further collaborative work, discussions, potential solutions, evaluations, resulting publications and verified reference implementations are needed to ensure DLTs are safe, secure, and trustworthy. Practical implications - Interdisciplinary teams with members from academia, business and industry, and from disciplines such as business, entrepreneurship, theoretical and practical computer science, cybersecurity, finance, mathematics and statistics, must be formed. Such teams must collaborate with the objective of developing strategies and techniques for ensuring the

  5. Intangible Property : Defining Intangible Property for Transfer Pricing Purposes and Exploring the Concept of Economic Ownership

    OpenAIRE

    Eriksson, Emma

    2010-01-01

    In this thesis the definition of intangible property contained in the Transfer Pricing Guidelines is analysed with the aim of exploring whether it is satisfactory or not. Furthermore, the need to have a definition of intangible property for transfer pricing purposes at all is explored. To properly allocate income and expenditure relating to intangible property one needs to first establish who is the owner of the property. In the light of this the economic ownership is explored as well. Two co...

  6. Properties of leptons

    International Nuclear Information System (INIS)

    Perl, M.L.

    1989-12-01

    The properties of the electron, muon, tau, and their neutrinos are reviewed. Three discrepancies in our understanding of those properties are discussed: the lifetime of orthopositronium, the mass spectra of e + e - pairs produced in heavy ion collisions, and the 1-charged particle modes problem in tau decays. The review concludes with a discussion of what we need to learn about the tau and the consequent need for a tau-charm factory. 68 refs., 7 figs., 8 tabs

  7. 41 CFR 102-75.1260 - Does GSA conduct Federal screening on every property reported as excess real property?

    Science.gov (United States)

    2010-07-01

    ... of hazardous substances at the Government-owned facility; (e) The property is an easement; (f) The... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Does GSA conduct Federal... Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...

  8. Calibrated Properties Model

    International Nuclear Information System (INIS)

    Ahlers, C.F.; Liu, H.H.

    2001-01-01

    The purpose of this Analysis/Model Report (AMR) is to document the Calibrated Properties Model that provides calibrated parameter sets for unsaturated zone (UZ) flow and transport process models for the Yucca Mountain Site Characterization Project (YMP). This work was performed in accordance with the AMR Development Plan for U0035 Calibrated Properties Model REV00 (CRWMS M and O 1999c). These calibrated property sets include matrix and fracture parameters for the UZ Flow and Transport Model (UZ Model), drift seepage models, drift-scale and mountain-scale coupled-processes models, and Total System Performance Assessment (TSPA) models as well as Performance Assessment (PA) and other participating national laboratories and government agencies. These process models provide the necessary framework to test conceptual hypotheses of flow and transport at different scales and predict flow and transport behavior under a variety of climatic and thermal-loading conditions

  9. Debates on Intellectual Property Rights

    Directory of Open Access Journals (Sweden)

    Paula – Angela VIDRAŞCU

    2014-09-01

    Full Text Available This paper supports the understanding of the definition of intellectual property rights and strong connection with intangible assets and, on the other hand, provides a brief presentation of the organizations supporting the protection of such rights. The essential aim of this article is represented by the detailed information obtained as a result of research carried out in order to define, identify and study the application of IPR in general and especially in our country. At the end of the paper I mentioned what involves protecting intellectual property rights and brought little concerned how our country is perceived to protect such rights. Most often, intellectual property is defined as a formal document of title, like a lease, which means that the property is a legal concept distinct from real property that are actually good without concrete material form. Constitute a special category of assets being perceived as an original creation, derived from creative ideas; has or may have a commercial value due to its contribution to earnings for its owner. The need for protection of intellectual property rights has emerged because of the changes in the contemporary society. The aim and purpose of which is to protect human intelligence product and, at the same time, ensuring that consumers benefit from the use of the attributes of this product. Always remember that the violation of intellectual property rights, causes injury to major economic, signifying a strong threat to the consumers health and safety.

  10. Surface orientation effects on bending properties of surgical mesh are independent of tensile properties.

    Science.gov (United States)

    Simon, David D; Andrews, Sharon M; Robinson-Zeigler, Rebecca; Valdes, Thelma; Woods, Terry O

    2018-02-01

    Current mechanical testing of surgical mesh focuses primarily on tensile properties even though implanted devices are not subjected to pure tensile loads. Our objective was to determine the flexural (bending) properties of surgical mesh and determine if they correlate with mesh tensile properties. The flexural rigidity values of 11 different surgical mesh designs were determined along three textile directions (machine, cross-machine, and 45° to machine; n = 5 for each) using ASTM D1388-14 while tracking surface orientation. Tensile testing was also performed on the same specimens using ASTM D882-12. Linear regressions were performed to compare mesh flexural rigidity to mesh thickness, areal mass density, filament diameter, ultimate tensile strength, and maximum extension. Of 33 mesh specimen groups, 30 had significant differences in flexural rigidity values when comparing surface orientations (top and bottom). Flexural rigidity and mesh tensile properties also varied with textile direction (machine and cross-machine). There was no strong correlation between the flexural and tensile properties, with mesh thickness having the best overall correlation with flexural rigidity. Currently, surface orientation is not indicated on marketed surgical mesh, and a single mesh may behave differently depending on the direction of loading. The lack of correlation between flexural stiffness and tensile properties indicates the need to examine mesh bending stiffness to provide a more comprehensive understanding of surgical mesh mechanical behaviors. Further investigation is needed to determine if these flexural properties result in the surgical mesh behaving mechanically different depending on implantation direction. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 854-862, 2018. © 2017 Wiley Periodicals, Inc.

  11. Rents in property rights creation and implementation

    Directory of Open Access Journals (Sweden)

    Žarković Jelena

    2006-01-01

    Full Text Available The institution of property rights is increasingly being recognized as an essential building block of an economically prosperous society. The question that remains unanswered however, is how do we develop effective property rights institutions? The literature dealing with the development of property rights tends to be, in general, overly optimistic since there is a tendency to view the design of property rights institutions as optimizing decisions to economize on transaction costs and to facilitate new economic activities. On the other hand, since property rights define the distribution of wealth and political power in a society changes in property rights structures are likely to be influenced by more than pure efficiency considerations. Therefore, in order to achieve a balanced analysis of the evolution of property rights institutions our article introduces the state in the whole process. Following the propositions of the interest group theory of government we show an important relationship between rent seeking and state involvement in property rights creation. The state with a coercive power to establish and enforce property rights can also use that power, through the process of economic regulation, to redistribute property rights to politically influential interest groups. Herein lies the state failure in property rights creation.

  12. Diameter 2 properties and convexity

    Czech Academy of Sciences Publication Activity Database

    Abrahamsen, T. A.; Hájek, Petr Pavel; Nygaard, O.; Talponen, J.; Troyanski, S.

    2016-01-01

    Roč. 232, č. 3 (2016), s. 227-242 ISSN 0039-3223 R&D Projects: GA ČR GA16-07378S Institutional support: RVO:67985840 Keywords : diameter 2 property * midpoint locally uniformly rotund * Daugavet property Subject RIV: BA - General Mathematics Impact factor: 0.535, year: 2016 https://www.impan.pl/pl/wydawnictwa/czasopisma-i-serie-wydawnicze/studia- mathematica /all/232/3/91534/diameter-2-properties-and-convexity

  13. Property.

    Science.gov (United States)

    Piele, Philip K.

    Numerous cases in this year's chapter dealt with the same topics of previous years--contracts and bids for building construction, and detachment and annexation of a portion of a school district. The courts continued to attribute board discretionary authority to school boards in school property matters. Intergovernmental disputes over ownership or…

  14. The study of thermodynamic properties and transport properties of multicomponent systems with chemical reactions

    Directory of Open Access Journals (Sweden)

    Samujlov E.

    2013-04-01

    Full Text Available In case of system with chemical reaction the most important properties are heat conductivity and heat capacity. In this work we have considered the equation for estimate the component of these properties caused by chemical reaction and ionization processes. We have evaluated the contribution of this part in heat conductivity and heat capacity too. At the high temperatures contribution in heat conductivity from ionization begins to play an important role. We have created a model, which describe partial and full ionization of gases and gas mixtures. In addition, in this work we present the comparison of our result with experimental data and data from numerical simulation. We was used the data about transport properties of middle composition of Russian coals and the data of thermophysical properties of natural gas for comparison.

  15. Nuclear property insurance: status and outlook

    International Nuclear Information System (INIS)

    1982-05-01

    The report addresses the problem of the unavailability of adequate levels of property insurance for commercial power reactors to pay for decontamination and cleanup costs arising from accidents. The report is designed to answer six questions, as follows: (1) What has been the development of each principal source of nuclear property insurance used as of early 1982 by nuclear utilities in the United States; (2) What are some of the distinguishing features of nuclear property insurance as offered by the principal sources; (3) How much nuclear property insurance was offered by each of these sources as of January 1, 1982; (4) Assuming that present plans came to fruition, how much nuclear property insurance is likely to be offered by each of these sources as of January 1, 1983; (5) What, if any, principal sources of nuclear property insurance are likely to emerge in the private sector by January 1, 1983; (6) What problems serious enough to warrant action of the NRC exist with respect to nuclear property insurance and what action should NRC take in response to each problem

  16. Fat properties during homogenization, spray-drying, and storage affect the physical properties of dairy powders.

    Science.gov (United States)

    Vignolles, M L; Lopez, C; Madec, M N; Ehrhardt, J J; Méjean, S; Schuck, P; Jeantet, R

    2009-01-01

    Changes in fat properties were studied before, during, and after the drying process (including during storage) to determine the consequences on powder physical properties. Several methods were combined to characterize changes in fat structure and thermal properties as well as the physical properties of powders. Emulsion droplet size and droplet aggregation depended on the homogenizing pressures and were also affected by spray atomization. Aggregation was usually greater after spray atomization, resulting in greater viscosities. These processes did not have the same consequences on the stability of fat in the powders. The quantification of free fat is a pertinent indicator of fat instability in the powders. Confocal laser scanning microscopy permitted the characterization of the structure of fat in situ in the powders. Powders from unhomogenized emulsions showed greater free fat content. Surface fat was always overrepresented, regardless of the composition and process parameters. Differential scanning calorimetry melting experiments showed that fat was partially crystallized in situ in the powders stored at 20 degrees C, and that it was unstable on a molecular scale. Thermal profiles were also related to the supramolecular structure of fat in the powder particle matrix. Powder physical properties depended on both composition and process conditions. The free fat content seemed to have a greater influence than surface fat on powder physical properties, except for wettability. This study clearly showed that an understanding of fat behavior is essential for controlling and improving the physical properties of fat-filled dairy powders and their overall quality.

  17. How Are Property Investment Returns Determined? — Estimating the Micro-Structure of Asset Prices, Property Income, and Discount Rates —

    OpenAIRE

    清水, 千弘; Chihiro, Shimizu

    2014-01-01

    How exactly should one estimate property investment returns? Investors in property aim to maximize capital gains from price increases and income generated by the property. How are the returns on investment in property determined based on its characteristics, and what kind of market characteristics does it have? Focusing on the Tokyo commer-cial property market and residential property market, the purpose of this paper was to break down and measure the micro-structure of property investment re...

  18. Synthesis, field emission properties and optical properties of ZnSe nanoflowers

    Energy Technology Data Exchange (ETDEWEB)

    Xue, S.L., E-mail: slxue@dhu.edu.cn [Department of Applied Physics, College of Science, Donghua University, Shanghai 201620 (China); Wu, S.X.; Zeng, Q.Z.; Xie, P.; Gan, K.X.; Wei, J.; Bu, S.Y.; Ye, X.N.; Xie, L. [Department of Applied Physics, College of Science, Donghua University, Shanghai 201620 (China); Zou, R.J. [State Key Laboratory for Modification and Chemical Fibers and Polymer Materials, Donghua University, Shanghai 201620 (China); Zhang, C.M.; Zhu, P.F. [Department of Physics, School of Fundamental Studies, Shanghai University of Engineering Science, Shanghai 201620 (China)

    2016-03-01

    Graphical abstract: Unique ZnSe nanoflowers have been successfully synthesized by reaction of Se powder with Zn substrates. They are characterized by XRD, SEM, TEM, XPS, EDS and Raman spectroscopy and were single crystals with cubic zinc blende (ZB) structure. They also have excellent field emission properties and optical properties. - Highlights: • Novel ZnSe nanoflowers are grown on Zn foils. • ZnSe nanoflowers are characterized by XRD, SEM, TEM, XPS and Raman spectra. • ZnSe nanoflowers on Zn foils as cathodes possess good FE properties. - Abstract: ZnSe nanoflowers have been synthesized by reaction of Se powder with Zn substrates at low temperature. The as-prepared ZnSe nanoflowers were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), X-ray energy dispersive spectroscope (EDS) and Raman spectroscopy measurements. It was found that the morphologies of the as-prepared samples highly depended on reaction time. ZnSe nanoclusters and nanoflowers formed at 573 K when the reaction time was 20 and 60 min, respectively. The as-prepared ZnSe nanoflowers were composed of radically aligned ZnSe nanorods with smooth surfaces. The results of XRD, XPS, EDS, TEM and Raman showed that the as-prepared ZnSe nanocrystals were single crystals with cubic zinc blende (ZB) structure. The formation mechanism of the as-prepared ZnSe nanoflowers was also discussed. In addition, the as-prepared ZnSe nanoflowers had excellent electron emission properties. The turn-on field of the as-prepared ZnSe nanoflowers was 3.5 V/μm and the enhancement factor was 3499. The optical properties of the as-prepared ZnSe nanoflowers were also investigated. The results demonstrated that the as-prepared ZnSe nanoflowers were potential candidates for optoelectronic devices.

  19. GROUNDS FOR LIMITING PROPERTY RIGHTS IN THE APPLICATION OF TEMPORARY SEIZURE OF PROPERTY IN CRIMINAL PROCEEDINGS

    Directory of Open Access Journals (Sweden)

    Tetiana Suprun

    2018-01-01

    Full Text Available The purpose of the paper is to investigate reasons for the restriction of property rights in the application of temporary seizure of property in criminal proceedings and to determine promising directions for further research on the issues. The issue of measures to ensure criminal proceedings and observance of human and civil rights and freedoms was investigated by a number of domestic scientists, but the degree of investigation of grounds for restricting property rights in the application of temporary seizure of property in criminal proceedings in the context of amendments made to the CPC of Ukraine in recent years remains insufficient. That is why the study of the grounds for limiting property rights in the application of temporary seizure of property in criminal proceedings is now of particular urgency. Methodology. Methodological basis of the research is a set of philosophical, general scientific, special scientific methods. The method of logical-semantic analysis is used to clarify the meaning of multi-valued concepts, the application of the method of system analysis allowed investigating the place of the institute of property rights in legal literature and legislation of Ukraine. The method of grouping and the system and structural approach are used for classifying the distribution, ascertaining the internal structure, and analysing the interconnections between elements of the concept of ownership and the category of property rights restriction. Results. The paper examines the factual and formal legal grounds for limiting the ownership of a suspect, accused, and other persons in the application of temporary seizure of property in a criminal proceeding. The conclusion is drawn on the need to clarify the factual grounds for the temporary seizure of property for cases where such a seizure is carried out by a person who has carried out legal detention in the manner prescribed by Articles 207, 208 of the CPC of Ukraine and is not an investigator

  20. Research on working property and early age mechanical property of self-compacting concrete used in steel-concrete structure

    International Nuclear Information System (INIS)

    Zhao Yongguang

    2013-01-01

    Background: Self-compacting concrete that has good working property is the prerequisite of steel-concrete structure. The early age mechanical property of self-compacting concrete is the important parameter when design steel-concrete structure. Purpose: This paper attempts to research the working property and early age mechanical property of self-compacting concrete. Methods: Test is used to research the working property and early age mechanical property of self-compacting concrete. Results: Self-compacting concrete that could meet the requirement of steel-concrete structure has been mixed and parameters of early age mechanical property of self-compacting concrete which is necessary for design of steel-concrete structure have been presented. Conclusions: Base on the results, this paper can guide the construction of self-compacting concrete in steel-concrete structure and the design and construction of steel-concrete structure. (author)

  1. Directed networks, allocation properties and hierarchy formation

    NARCIS (Netherlands)

    Slikker, M.; Gilles, R.P.; Norde, H.W.; Tijs, S.H.

    2005-01-01

    We investigate properties for allocation rules on directed communication networks and the formation of such networks under these payoff properties. We study allocation rules satisfying two appealing properties, Component Efficiency (CE) and the Hierarchical Payoff Property (HPP). We show that such

  2. Coasian and Modern Property Rights Economics

    DEFF Research Database (Denmark)

    Foss, Kirsten; Foss, Nicolai

    2015-01-01

    Laying the foundations of property rights economics stands out among Ronald Coase's many seminal contributions. This approach had an impact on a number of fields in economics in, particularly, the 1960s and 1970s. The modern body of property rights economics mainly originates in the work Oliver...... Hart and is quite different in style, scope, and implications from the original property rights economics of Coase, Demsetz, Alchian, Cheung, Umbeck, Barzel, etc. Based on our earlier work on the subject (Foss and Foss, 2001), we argue that the change from Mark I to Mark II property rights economics...... led to a substantial narrowing of the scope of property rights economics, somewhat akin to a Kuhnian loss of content. In particular, Mark II property rights economics make strong assumptions concerning the definition and enforcement of ownership rights made which lead to many real life institutions...

  3. Rheological properties of sodium smectite clay

    International Nuclear Information System (INIS)

    Boergesson, L.; Hoekmark, H.; Karnland, O.

    1988-12-01

    The rheological properties of Na-smectite Mx-80 have been investigated by various laboratory tests. The investigations include determination of the hydraulic conductivity, the undrained stress-strain-strength properties, the creep properties, the compression and swelling properties in drained and undrained conditions and the undrained thermomechanical properties. Measurements have been made at different densities, clay/sand mixtures and pore water compositions. The influence of temperature, rate of strain and testing technique has also been considered. The investigation has led to a supply of basic data for the material models which will be used at performance calculations. The results have also increased the general understanding of the function of smectitic clay as buffer material. The microstructural behaviour has been considered at the validation of the different test results and the validity of the effective stress theory has been discussed. Comparisons with the properties of Ca-smectite have also been made. (orig.)

  4. Microstructure, mechanical properties, bio-corrosion properties and cytotoxicity of as-extruded Mg-Sr alloys

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Chaoyong [College of Materials Science and Engineering, Chongqing University, Chongqing 400044 (China); Pan, Fusheng, E-mail: fspan@cqu.edu.cn [College of Materials Science and Engineering, Chongqing University, Chongqing 400044 (China); National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400044 (China); Chongqing Academy of Science and Technology, Chongqing 401123 (China); Zhang, Lei; Pan, Hucheng; Song, Kai; Tang, Aitao [College of Materials Science and Engineering, Chongqing University, Chongqing 400044 (China)

    2017-01-01

    In this study, as-extruded Mg-Sr alloys were studied for orthopedic application, and the microstructure, mechanical properties, bio-corrosion properties and cytotoxicity of as-extruded Mg-Sr alloys were investigated by optical microscopy, scanning electron microscopy with an energy dispersive X-ray spectroscopy, X-ray diffraction, tensile and compressive tests, immersion test, electrochemical test and cytotoxicity test. The results showed that as-extruded Mg-Sr alloys were composed of α-Mg and Mg{sub 17}Sr{sub 2} phases, and the content of Mg{sub 17}Sr{sub 2} phases increased with increasing Sr content. As-extruded Mg-Sr alloy with 0.5 wt.% Sr was equiaxed grains, while the one with a higher Sr content was long elongated grains and the grain size of the long elongated grains decreased with increasing Sr content. Tensile and compressive tests showed an increase of both tensile and compressive strength and a decrease of elongation with increasing Sr content. Immersion and electrochemical tests showed that as-extruded Mg-0.5Sr alloy exhibited the best anti-corrosion property, and the anti-corrosion property of as-extruded Mg-Sr alloys deteriorated with increasing Sr content, which was greatly associated with galvanic couple effect. The cytotoxicity test revealed that as-extruded Mg-0.5Sr alloy did not induce toxicity to cells. These results indicated that as-extruded Mg-0.5Sr alloy with suitable mechanical properties, corrosion resistance and good cytocompatibility was potential as a biodegradable implant for orthopedic application. - Highlights: • Biodegradable as-extruded Mg-Sr alloys were fabricated. • Microstructure of alloys changed with increasing Sr content. • Mechanical properties of alloys could be controlled by adjusting the Sr content. • Corrosion properties of alloys decreased with increasing Sr content. • As-extruded Mg-0.5Sr alloy was potential for orthopedic application.

  5. Evaluation of stigmatized properties

    Directory of Open Access Journals (Sweden)

    Hajnal István

    2017-12-01

    Full Text Available Stigmatized property is real estate burdened with an external negative effect. Individual cases are spread along a broad spectrum, along many dimensions that include the rational and the irrational, the acute and the chronic. Examples for the stigmatizing effect are a nearby airport, ground water contaminated by chemicals, presence of a high-voltage power line, and so on. Eval­uation of these properties needs special methodology. Stigma can reduce the property’s market value through a particular, multi-layered filter. The author systematically examines the professional literature’s cases of evaluation of stigmatized properties. The research aims to organize and compare the cases in order to calculate the market value of stigmatized properties. Based on the analysis, six significant dimensions are identified. A focus group of 19 experts examined and individually evaluated the stigma­tizing effects along these different dimensions. The author suggests that it is possible to estimate the stigma’s effect and compare different cases to one another effectively. The results allow the international methodology of valu­ation to be processed.

  6. 32 CFR 174.13 - Personal property.

    Science.gov (United States)

    2010-07-01

    ... the operation of a unit, function, component, weapon, or weapons system at another installation; (2... classified items; nuclear, biological, and chemical items; weapons and munitions; museum property or items of... personal property). This property includes materials or parts used in a manufacturing or repair function...

  7. 24 CFR 200.73 - Property development.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Property development. 200.73 Section 200.73 Housing and Urban Development Regulations Relating to Housing and Urban Development... Continuing Eligibility Requirements for Existing Projects Property Requirements § 200.73 Property development...

  8. Optical adhesive property study

    Energy Technology Data Exchange (ETDEWEB)

    Sundvold, P.D.

    1996-01-01

    Tests were performed to characterize the mechanical and thermal properties of selected optical adhesives to identify the most likely candidate which could survive the operating environment of the Direct Optical Initiation (DOI) program. The DOI system consists of a high power laser and an optical module used to split the beam into a number of channels to initiate the system. The DOI requirements are for a high shock environment which current military optical systems do not operate. Five candidate adhesives were selected and evaluated using standardized test methods to determine the adhesives` physical properties. EC2216, manufactured by 3M, was selected as the baseline candidate adhesive based on the test results of the physical properties.

  9. Evaluation of properties of low activation Mn-Cr steel (2). Physical properties and aging properties

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Shigeru; Fukaya, Kiyoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Ishiyama, Shintaro [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Sato, Ikuo; Kusuhashi, Mikio; Hatakeyama, Takeshi [Japan Steel Works Ltd., Muroran, Hokkaido (Japan). Muroran Plant; Takahashi, Heishichiro [Hokkaido Univ., Sapporo (Japan); Kikuchi, Mitsuru [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

    2000-08-01

    The JT-60SU (Super Upgrade) program is under discussion at JAERI. Its design optimization activity requires the vacuum vessel material to be non-magnetic, very strong and with low induced activation. However, there is no suitable material available to fulfill all the requirements. JAERI started to develop a new material for the vacuum vessel together with the Japan Steel Works LTD. (JSW). Chemical composition and metallurgical processes were optimized and a new steel named VC9, which has the composition of Cr :16wt%, Mn :15.5wt%, C :0.2wt%, N :0.2wt% with nonmagnetic single {gamma} phase, was selected as a candidate material. Here, physical properties and aging properties of VC9 were studied and the results were compared with those of 316L stainless steel. (author)

  10. Assisted Housing - Multifamily Properties - Assisted

    Data.gov (United States)

    Department of Housing and Urban Development — HUD's Multifamily Housing property portfolio consist primarily of rental housing properties with five or more dwelling units such as apartments or town houses, but...

  11. Are Effective Properties Effective?

    International Nuclear Information System (INIS)

    Han, Ru; Ingber, Marc S.; Hsiao, S.-C.

    2008-01-01

    The effective moduli (effective Young's modulus, effective Poisson's ratio, effective shear modulus, and effective bulk modulus) of dispersed-phase-reinforced composite materials are determined at the mesoscopic level using three-dimensional parallel boundary element simulations. By comparing the mesoscopic BEM results and the macroscopic results based on effective properties, limitations in the effective property approach have been examined

  12. 10 CFR 1022.21 - Property management.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Property management. 1022.21 Section 1022.21 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) COMPLIANCE WITH FLOODPLAIN AND WETLAND ENVIRONMENTAL REVIEW REQUIREMENTS Other Requirements § 1022.21 Property management. (a) If property in a floodplain or wetland is...

  13. 28 CFR 66.31 - Real property.

    Science.gov (United States)

    2010-07-01

    ... percentage of participation in the cost of the original purchase to the fair market value of the property... AND COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes, Property... subgrantee's percentage of participation in the purchase of the real property to the current fair market...

  14. Predicting soil properties in the tropics

    NARCIS (Netherlands)

    Minasny, B.; Hartemink, A.E.

    2011-01-01

    It is practically impossible to measure soil properties continuously at each location across the globe. Therefore, it is necessary to have robust systems that can predict soil properties at a given location. That is needed in many tropical countries where the dearth of soil property measurements is

  15. Improved dielectric properties, mechanical properties, and thermal conductivity properties of polymer composites via controlling interfacial compatibility with bio-inspired method

    Science.gov (United States)

    Ruan, Mengnan; Yang, Dan; Guo, Wenli; Zhang, Liqun; Li, Shuxin; Shang, Yuwei; Wu, Yibo; Zhang, Min; Wang, Hao

    2018-05-01

    Surface functionalization of Al2O3 nano-particles by mussel-inspired poly(dopamine) (PDA) was developed to improve the dielectric properties, mechanical properties, and thermal conductivity properties of nitrile rubber (NBR) matrix. As strong adhesion of PDA to Al2O3 nano-particles and hydrogen bonds formed by the catechol groups of PDA and the polar acrylonitrile groups of NBR, the dispersion of Al2O3-PDA/NBR composites was improved and the interfacial force between Al2O3-PDA and NBR matrix was enhanced. Thus, the Al2O3-PDA/NBR composites exhibited higher dielectric constant, better mechanical properties, and larger thermal conductivity comparing with Al2O3/NBR composites at the same filler content. The largest thermal conductivity of Al2O3-PDA/NBR composite filled with 30 phr Al2O3-PDA was 0.21 W/m K, which was 122% times of pure NBR. In addition, the Al2O3-PDA/NBR composite filled with 30 phr Al2O3-PDA displayed a high tensile strength about 2.61 MPa, which was about 255% of pure NBR. This procedure is eco-friendly and easy handling, which provides a promising route to polymer composites in application of thermal conductivity field.

  16. Mechanisms for development of property rights institutions

    Directory of Open Access Journals (Sweden)

    Žarković Jelena

    2006-01-01

    Full Text Available The institution of property rights is increasingly recognized as an essential building block of an economically prosperous society. The question that remains unsolved, however, is how do we develop effective property rights institutions? The literature dealing with the development of property rights tends to be, in general, an optimistic one since there is a tendency to view the design of property rights institutions as maximizing decisions to economize on transaction costs and to facilitate new economic activities. On the other hand, since property rights define the distribution of wealth and political power in a society, changes in property rights structures are likely to be influenced by more than pure efficiency considerations. Therefore, in order to achieve a balanced analysis of the evolution of property rights institutions, the model of endogenous property rights creation should be modified. We did that by introducing the neoinstitutional theory of the state in the model.

  17. 10 CFR 600.323 - Property management system.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Property management system. 600.323 Section 600.323 Energy....323 Property management system. The recipient's property management system must include the following... existence, current utilization, and continued need for the property. (d) A control system must be in effect...

  18. 22 CFR 226.32 - Real property.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Real property. 226.32 Section 226.32 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Property Standards § 226.32 Real property. (a) Unless the agreement...

  19. 21 CFR 1403.31 - Real property.

    Science.gov (United States)

    2010-04-01

    ... the cost of the original purchase to the fair market value of the property. However, in those... percentage of participation in the purchase of the real property to the current fair market value of the... COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards...

  20. 45 CFR 1174.31 - Real property.

    Science.gov (United States)

    2010-10-01

    ... the cost of the original purchase to the fair market value of the property. However, in those... percentage of participation in the purchase of the real property to the current fair market value of the... COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards...

  1. 45 CFR 1183.31 - Real property.

    Science.gov (United States)

    2010-10-01

    ... the cost of the original purchase to the fair market value of the property. However, in those... percentage of participation in the purchase of the real property to the current fair market value of the... COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards...

  2. Characterization and bulk properties of oxides

    International Nuclear Information System (INIS)

    Sonder, E.; Connolly, T.F.

    1979-06-01

    The bulk properties of oxides are divided into two classes, intrinsic properties which depend solely on the identity of the material, and extrinsic ones, which differ for different samples of the same compound. Sources of tabulated numerical values of intrinsic properties are given and modern developments in information storage and retrieval are discussed. Extrinsic properties are shown to depend on defects and trace impurities in the samples. Techniques of trace impurity analysis are discussed and realistic limits of detection and accuracies are given for routine analyses

  3. On topological properties of sierpinski networks

    International Nuclear Information System (INIS)

    Imran, Muhammad; Sabeel-e-Hafi; Gao, Wei; Reza Farahani, Mohammad

    2017-01-01

    Sierpinski graphs constitute an extensively studied class of graphs of fractal nature applicable in topology, mathematics of Tower of Hanoi, computer science, and elsewhere. A large number of properties like physico-chemical properties, thermodynamic properties, chemical activity, biological activity, etc. are determined by the chemical applications of graph theory. These properties can be characterized by certain graph invariants referred to as topological indices. In QRAR/QSPR study these graph invariants has played a vital role. In this paper, we study the molecular topological properties of Sierpinski networks and derive the analytical closed formulas for the atom-bond connectivity (ABC) index, geometric-arithmetic (GA) index, and fourth and fifth version of these topological indices for Sierpinski networks denoted by S(n, k).

  4. Tribological properties of nanostripe surface structures-a design concept for improving tribological properties

    International Nuclear Information System (INIS)

    Miyake, K; Nakano, M; Korenaga, A; Mano, H; Ando, Y

    2010-01-01

    The tribological properties of nanostripe surface structures were investigated using a pin-on-plate tribometer in order to propose a design concept for improving the tribological properties. The authors used four kinds of nanostripe structures consisting of different combinations of materials (Fe-Au, C-SiC, Al-Al 2 O 3 and Al-Pt) fabricated by a process they had previously proposed. The frictional properties of the nanostripe structures depended on the materials that constituted the nanostripes. When the sliding direction in friction tests was parallel to the microgrooves, nanostripe structures remained on all surfaces even after friction tests. Based on the friction test results, the authors considered a design concept for nanostripe structures in tribological applications.

  5. 32 CFR 34.23 - Property management system.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Property management system. 34.23 Section 34.23... Requirements Property Standards § 34.23 Property management system. The recipient's property management system... control system shall be in effect to insure adequate safeguards to prevent loss, damage, or theft of the...

  6. 23 CFR 710.505 - Real property donations.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Real property donations. 710.505 Section 710.505...-WAY AND REAL ESTATE Property Acquisition Alternatives § 710.505 Real property donations. (a) Donations..., whichever is greater. All donations of property received prior to the approval of the NEPA document must...

  7. 28 CFR 0.47 - Alien property matters.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Alien property matters. 0.47 Section 0.47....47 Alien property matters. The Office of Alien Property shall be a part of the Civil Division: (a... Alien Property: (1) Exercising or performing all the authority, rights, privileges, powers, duties, and...

  8. 36 CFR 1211.120 - Transfers of property.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Transfers of property. 1211.120 Section 1211.120 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION... operates any education program or activity, and the Federal share of the fair market value of the property...

  9. 45 CFR 1157.31 - Real property.

    Science.gov (United States)

    2010-10-01

    ... the cost of the original purchase to the fair market value of the property. However, in those... percentage of participation in the purchase of the real property to the current fair market value of the... AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards § 1157.31...

  10. Dynamic mechanical properties of buffer material

    International Nuclear Information System (INIS)

    Takaji, Kazuhiko; Taniguchi, Wataru

    1999-11-01

    The buffer material is expected to maintain its low water permeability, self-sealing properties, radionuclides adsorption and retardation properties, thermal conductivity, chemical buffering properties, overpack supporting properties, stress buffering properties, etc. over a long period of time. Natural clay is mentioned as a material that can relatively satisfy above. Among the kinds of natural clay, bentonite when compacted is superior because (i) it has exceptionally low water permeability and properties to control the movement of water in buffer, (ii) it fills void spaces in the buffer and fractures in the host rock as it swells upon water uptake, (iii) it has the ability to exchange cations and to adsorb cationic radioelements. In order to confirm these functions for the purpose of safety assessment, it is necessary to evaluate buffer properties through laboratory tests and engineering-scale tests, and to make assessments based on the ranges in the data obtained. This report describes the procedures, test conditions, results and examinations on the buffer material of dynamic triaxial tests, measurement of elastic wave velocity and liquefaction tests that aim at getting hold of dynamic mechanical properties. We can get hold of dependency on the shearing strain of the shearing modulus and hysteresis damping constant, the application for the mechanical model etc. by dynamic triaxial tests, the acceptability of maximum shearing modulus obtained from dynamic triaxial tests etc. by measurement of elastic wave velocity and dynamic strength caused by cyclic stress etc. by liquefaction tests. (author)

  11. Review of particle properties

    International Nuclear Information System (INIS)

    Trippe, T.G.; Barbaro-Galtieri, A.; Kelly, R.L.; Rittenberg, A.; Rosenfeld, A.H.; Yost, G.P.; Barash-Schmidt, N.; Bricman, C.; Hemingway, R.J.; Losty, M.J.; Roos, M.; Chaloupka, V.; Armstrong, B.

    1976-01-01

    This review of the properties of leptons, mesons, and baryons is an updating of Review of Particle Properties, Particle Data Group [Phys. Letters 50B, No.1 (1974), and Supplement, Rev. Mod. Phys. 47 (1975) 535]. Data are evaluated, listed, averaged, and summarized in tables. Numerous tables, figures, and formulae of interest to particle physicists are also included. A data booklet is available

  12. Properties of conventional contrast media

    International Nuclear Information System (INIS)

    Muetzel, W.

    1981-01-01

    A comprehensive overview is given of the properties of contrast media currently used in computed tomography (CT). The chemical structure of the compounds and the physicochemical properties derived therefrom are described. Emphasis is placed on the importance of the physicochemical properties of contrast media for tolerance and the pharmacokinetic behavior of compounds in the body. An outline is given of the basic ideas governing rational use of contrast media in CT, which result from complex, time-dependent distribution of contrast media in different tissue spaces. (Auth.)

  13. Allegheny County Property Assessment Appeals

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Lists property assessment appeals filed and heard with the Board of Property Assessment Appeals and Review (BPAAR) and the hearing results, for tax years 2015 to...

  14. 31 CFR 551.406 - Entities owned by a person whose property and interests in property are blocked.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Entities owned by a person whose property and interests in property are blocked. 551.406 Section 551.406 Money and Finance: Treasury... TREASURY SOMALIA SANCTIONS REGULATIONS Interpretations § 551.406 Entities owned by a person whose property...

  15. Property Taxation. National Education Association Search.

    Science.gov (United States)

    National Education Association, Washington, DC. Research Div.

    The first of a series on school finance and the role of the state/local community, this document examines recent trends and developments in property taxation. The setting for property taxation and the state and local share of tax revenues for financing education are discussed. Two charts illustrate: (1) school district property tax collections…

  16. Scale dependence of effective media properties

    International Nuclear Information System (INIS)

    Tidwell, V.C.; VonDoemming, J.D.; Martinez, K.

    1992-01-01

    For problems where media properties are measured at one scale and applied at another, scaling laws or models must be used in order to define effective properties at the scale of interest. The accuracy of such models will play a critical role in predicting flow and transport through the Yucca Mountain Test Site given the sensitivity of these calculations to the input property fields. Therefore, a research programhas been established to gain a fundamental understanding of how properties scale with the aim of developing and testing models that describe scaling behavior in a quantitative-manner. Scaling of constitutive rock properties is investigated through physical experimentation involving the collection of suites of gas permeability data measured over a range of discrete scales. Also, various physical characteristics of property heterogeneity and the means by which the heterogeneity is measured and described are systematically investigated to evaluate their influence on scaling behavior. This paper summarizes the approach that isbeing taken toward this goal and presents the results of a scoping study that was conducted to evaluate the feasibility of the proposed research

  17. Hardmetals - microstructural design, testing and property maps

    Energy Technology Data Exchange (ETDEWEB)

    Roebuck, B; Gee, M G; Morrell, R [NPL Materials Centre, National Physical Laboratory, Teddington, Middlesex (United Kingdom)

    2001-07-01

    The production of WC/Co hardmetals and their analogues is considered a mature technology, however lately there has been new research results where the concept of microstructural design was used to produce alternatives to the conventional two-phase structure. This Industry is currently well served by a range of baseline established standards, which, if properly followed with good attention to correct quality procedures, will ensure consistent products. However, there are certain key properties such as corrosion, fatigue, impact wear or high temperature strength and toughness that are often measured but not always by standard tests methods. Microstructural design potential is reviewed, particularly the possibilities of performance improvement via changes in size, shape and distribution of the phases as well as recent developments in testing, specifically S-N fatigue and abrasive wear. Finally, the concept of property mapping is introduced as a tool for providing a framework for optimizing properties. Its utility in correlating performance properties and their relationships with microstructural parameters is evaluated. Two property maps are discussed: one where the property is plotted against a microstructural feature (microstructure property maps) such as WC grain size or Co binder phase content against coercivity or hardness and one where different properties, such as hardness and toughness are mapped against each other (comparative property maps). (nevyjel)

  18. Hardmetals - microstructural design, testing and property maps

    International Nuclear Information System (INIS)

    Roebuck, B.; Gee, M.G.; Morrell, R.

    2001-01-01

    The production of WC/Co hardmetals and their analogues is considered a mature technology, however lately there has been new research results where the concept of microstructural design was used to produce alternatives to the conventional two-phase structure. This Industry is currently well served by a range of baseline established standards, which, if properly followed with good attention to correct quality procedures, will ensure consistent products. However, there are certain key properties such as corrosion, fatigue, impact wear or high temperature strength and toughness that are often measured but not always by standard tests methods. Microstructural design potential is reviewed, particularly the possibilities of performance improvement via changes in size, shape and distribution of the phases as well as recent developments in testing, specifically S-N fatigue and abrasive wear. Finally, the concept of property mapping is introduced as a tool for providing a framework for optimizing properties. Its utility in correlating performance properties and their relationships with microstructural parameters is evaluated. Two property maps are discussed: one where the property is plotted against a microstructural feature (microstructure property maps) such as WC grain size or Co binder phase content against coercivity or hardness and one where different properties, such as hardness and toughness are mapped against each other (comparative property maps). (nevyjel)

  19. Allegheny County Property Sale Transactions

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains data on all Real Property parcels that have sold since 2013 in Allegheny County, PA. Before doing any market analysis on property sales, check...

  20. 14 CFR 1274.923 - Equipment and other property.

    Science.gov (United States)

    2010-01-01

    ... share ratio. Jointly owned property shall be disposed of as agreed to by the parties. (d) Title to... maintain property management standards for Government property and otherwise manage such property as set... Officer, Finance, with three copies sent concurrently to the center Industrial Property Officer. The...

  1. Thermophysical properties of ionic liquids.

    Science.gov (United States)

    Rooney, David; Jacquemin, Johan; Gardas, Ramesh

    2010-01-01

    Low melting point salts which are often classified as ionic liquids have received significant attention from research groups and industry for a range of novel applications. Many of these require a thorough knowledge of the thermophysical properties of the pure fluids and their mixtures. Despite this need, the necessary experimental data for many properties is scarce and often inconsistent between the various sources. By using accurate data, predictive physical models can be developed which are highly useful and some would consider essential if ionic liquids are to realize their full potential. This is particularly true if one can use them to design new ionic liquids which maximize key desired attributes. Therefore there is a growing interest in the ability to predict the physical properties and behavior of ionic liquids from simple structural information either by using group contribution methods or directly from computer simulations where recent advances in computational techniques are providing insight into physical processes within these fluids. Given the importance of these properties this review will discuss the recent advances in our understanding, prediction and correlation of selected ionic liquid physical properties.

  2. Stereotypical Reasoning: Logical Properties

    OpenAIRE

    Lehmann, Daniel

    2002-01-01

    Stereotypical reasoning assumes that the situation at hand is one of a kind and that it enjoys the properties generally associated with that kind of situation. It is one of the most basic forms of nonmonotonic reasoning. A formal model for stereotypical reasoning is proposed and the logical properties of this form of reasoning are studied. Stereotypical reasoning is shown to be cumulative under weak assumptions.

  3. Review of particle properties

    International Nuclear Information System (INIS)

    Bricman, C.; Dionisi, C.; Hemingway, R.J.; Mazzucato, M.; Montanet, L.; Barash-Schmidt, N.; Crawford, R.C.; Roos, M.; Barbaro-Galtieri, A.; Horne, C.P.; Kelly, R.L.; Losty, M.J.; Rittenberg, A.; Trippe, T.G.; Yost, G.P.; Armstrong, B.

    1978-01-01

    This review of the properties of leptons, mesons, and baryons is an updating of Review of Particle Properties, Particle Data Group [Rev. Mod. Phys. 48 (1976) No. 2, Part II; and Supplement, Phys. Lett. 68B (1977) 1]. Data are evaluated, listed, averaged, and summarized in tables. Numerous tables, figures, and formulae of interest to particle physicists are also included. A data booklet is available. (Auth.)

  4. Cellular signalling properties in microcircuits

    DEFF Research Database (Denmark)

    Toledo-Rodriguez, Maria; El Manira, Abdeljabbar; Wallén, Peter

    2005-01-01

    Molecules and cells are the signalling elements in microcircuits. Recent studies have uncovered bewildering diversity in postsynaptic signalling properties in all areas of the vertebrate nervous system. Major effort is now being invested in establishing the specialized signalling properties...

  5. Magnetic properties and microwave absorption properties of short ...

    Indian Academy of Sciences (India)

    als in the high-frequency range owing to their fascinating properties.2,3 However, .... Ni deposition.24 Owing to the low solubility of carbon in iron and nickel, Ni–Fe ... real (μ ) and imaginary (μ ) of complex permeability of the. Fe0.21Ni0.69/CF ...

  6. Elastic properties of spherically anisotropic piezoelectric composites

    International Nuclear Information System (INIS)

    En-Bo, Wei; Guo-Qing, Gu; Ying-Ming, Poon

    2010-01-01

    Effective elastic properties of spherically anisotropic piezoelectric composites, whose spherically anisotropic piezoelectric inclusions are embedded in an infinite non-piezoelectric matrix, are theoretically investigated. Analytical solutions for the elastic displacements and the electric potentials under a uniform external strain are derived exactly. Taking into account of the coupling effects of elasticity, permittivity and piezoelectricity, the formula is derived for estimating the effective elastic properties based on the average field theory in the dilute limit. An elastic response mechanism is revealed, in which the effective elastic properties increase as inclusion piezoelectric properties increase and inclusion dielectric properties decrease. Moreover, a piezoelectric response mechanism, of which the effective piezoelectric response vanishes due to the symmetry of spherically anisotropic composite, is also disclosed. (condensed matter: structure, thermal and mechanical properties)

  7. Distinct Reward Properties are Encoded via Corticostriatal Interactions.

    Science.gov (United States)

    Smith, David V; Rigney, Anastasia E; Delgado, Mauricio R

    2016-02-02

    The striatum serves as a critical brain region for reward processing. Yet, understanding the link between striatum and reward presents a challenge because rewards are composed of multiple properties. Notably, affective properties modulate emotion while informative properties help obtain future rewards. We approached this problem by emphasizing affective and informative reward properties within two independent guessing games. We found that both reward properties evoked activation within the nucleus accumbens, a subregion of the striatum. Striatal responses to informative, but not affective, reward properties predicted subsequent utilization of information for obtaining monetary reward. We hypothesized that activation of the striatum may be necessary but not sufficient to encode distinct reward properties. To investigate this possibility, we examined whether affective and informative reward properties were differentially encoded in corticostriatal interactions. Strikingly, we found that the striatum exhibited dissociable connectivity patterns with the ventrolateral prefrontal cortex, with increasing connectivity for affective reward properties and decreasing connectivity for informative reward properties. Our results demonstrate that affective and informative reward properties are encoded via corticostriatal interactions. These findings highlight how corticostriatal systems contribute to reward processing, potentially advancing models linking striatal activation to behavior.

  8. Silver Matrix Composites - Structure and Properties

    Directory of Open Access Journals (Sweden)

    Wieczorek J.

    2016-03-01

    Full Text Available Phase compositions of composite materials determine their performance as well as physical and mechanical properties. Depending on the type of applied matrix and the kind, amount and morphology of the matrix reinforcement, it is possible to shape the material properties so that they meet specific operational requirements. In the paper, results of investigations on silver alloy matrix composites reinforced with ceramic particles are presented. The investigations enabled evaluation of hardness, tribological and mechanical properties as well as the structure of produced materials. The matrix of composite material was an alloy of silver and aluminium, magnesium and silicon. As the reinforcing phase, 20-60 μm ceramic particles (SiC, SiO2, Al2O3 and Cs were applied. The volume fraction of the reinforcing phase in the composites was 10%. The composites were produced using the liquid phase (casting technology, followed by plastic work (the KOBO method. The mechanical and tribological properties were analysed for plastic work-subjected composites. The mechanical properties were assessed based on a static tensile and hardness tests. The tribological properties were investigated under dry sliding conditions. The analysis of results led to determination of effects of the composite production technology on their performance. Moreover, a relationship between the type of reinforcing phase and the mechanical and tribological properties was established.

  9. Mechanical Properties and Acoustic Emission Properties of Rocks with Different Transverse Scales

    Directory of Open Access Journals (Sweden)

    Xi Yan

    2017-01-01

    Full Text Available Since the stability of engineering rock masses has important practical significance to projects like mining, tunneling, and petroleum engineering, it is necessary to study mechanical properties and stability prediction methods for rocks, cementing materials that are composed of minerals in all shapes and sizes. Rocks will generate acoustic emission during damage failure processes, which is deemed as an effective means of monitoring the stability of coal rocks. In the meantime, actual mining and roadway surrounding rocks tend to have transverse effects; namely, the transverse scale is larger than the length scale. Therefore, it is important to explore mechanical properties and acoustic emission properties of rocks under transverse size effects. Considering the transverse scale effects of rocks, this paper employs the microparticle flow software PFC2D to explore the influence of different aspect ratios on damage mechanics and acoustic emission properties of rocks. The results show that (1 the transverse scale affects uniaxial compression strength of rocks. As the aspect ratio increases, uniaxial compression strength of rocks decreases initially and later increases, showing a V-shape structure and (2 although it affects the maximum hit rate and the strain range of acoustic emission, it has little influence on the period of occurrence. As the transverse scale increases, both damage degree and damage rate of rocks decrease initially and later increase.

  10. Can we predict the property cycle? A study of securitized property market

    Science.gov (United States)

    Hui, Eddie Chi-Man; Wang, Ziyou

    2015-05-01

    Academia takes interest in cyclicality of real estate market. Compared to various findings on housing cycles, no literature takes insight into the cycles of securitized property markets. To address the issue, a nonlinear model is developed to probe into the characteristics of cycles in global markets (US, UK, Australia, Japan, Singapore and Hong Kong) over the last 23 years. The findings suggest that (a) cointegrating relationships influence the six markets in the long term and become stronger during bullish markets. (b) The short-term dynamics of each market is more likely to have a regime-switching structure. (c) The cyclical pattern shows differences between securitized property and housing markets, as well as between securitized property and general stock markets. Meanwhile, the cyclical pattern in developed markets is also different from that in developing markets. (d) The duration dependence shows a weak effect of the boom on predicting the occurrence of the upcoming bust. Instead, the magnitude of boom growth plays a significant role in predicting the duration of following bust. (e) The asymmetric analysis brings forward the "paralleling effect" which indicates that the asymmetry in returns is parallel with the movements of r. The methodology shall serve in providing detailed implications on the characters of cycle and duration forecast in securitized property markets for investors and governments.

  11. Forcing absoluteness and regularity properties

    NARCIS (Netherlands)

    Ikegami, D.

    2010-01-01

    For a large natural class of forcing notions, we prove general equivalence theorems between forcing absoluteness statements, regularity properties, and transcendence properties over L and the core model K. We use our results to answer open questions from set theory of the reals.

  12. Review of particle properties

    Energy Technology Data Exchange (ETDEWEB)

    Yost, G P; Barnett, R M; Hinchliffe, I; Lynch, G R; Rittenberg, A; Ross, R R; Suzuki, M; Trippe, T G; Wohl, C G; Armstrong, B

    1988-04-14

    This review of the properties of gauge bosons, leptons, mesons, and baryons is an updating of the Review of Particle Properties, Particle Data Group (Phys. Lett. 170B (1986)). Data are evaluated, listed, averaged, and summarized in tables. We continue the more orderly set of particle names implemented in the 1986 edition. Numerous tables, figures, and formulae of interest to particle physicists are also included. A data booklet is available.

  13. 32 CFR 1903.15 - Preservation of property.

    Science.gov (United States)

    2010-07-01

    ...) Property Damage. Destroying or damaging private property. (b) Theft. The theft of private property, except..., the throwing of articles of any kind from or at buildings, vehicles, or persons while on an Agency...

  14. Liability for on-site nuclear property damage

    International Nuclear Information System (INIS)

    Neems, H.J.

    2000-01-01

    Typically, liability for on-site property addressed in contracts between operator and its suppliers. Nuclear power plant operators ordinarily protect themselves against risk of nuclear damage to on-site property by insurance. Nuclear liability laws do not specifically address liability for nuclear damage to on-site property. Nuclear plant owners should address risk of damage to on-site property when developing risk management program

  15. Accuracy of the Government-Owned Contractor-Occupied Real Property in the Military Departments' Real Property Databases

    National Research Council Canada - National Science Library

    2000-01-01

    .... Accurate reporting of real property on the Military Departments' real property databases is essential to DoD and the Federal Government receiving favorable audit opinions on their financial statements...

  16. Static mechanical properties of buffer material

    International Nuclear Information System (INIS)

    Takaji, Kazuhiko; Suzuki, Hideaki

    1999-11-01

    The buffer material is expected to maintain its low water permeability, self-sealing properties, radionuclides adsorption and retardation properties, thermal conductivity, chemical buffering properties, overpack supporting properties, stress buffering properties, etc. over a long period of time. Natural clay is mentioned as a material that can relatively satisfy above. Among the kinds of natural clay, bentonite when compacted is superior because (i) it has exceptionally low water permeability and properties to control the movement of water in buffer, (ii) it fills void spaces in the buffer and fractures in the host rock as it swells upon water uptake, (iii) it has the ability to exchange cations and to adsorb cationic radioelements. In order to confirm these functions for the purpose of safety assessment, it is necessary to evaluate buffer properties through laboratory tests and engineering-scale tests, and to make assessments based on the ranges in the data obtained. This report describes the procedures, test conditions, results and examinations on the buffer material of unconfined compression tests, one-dimensional consolidation tests, consolidated-undrained triaxial compression tests and consolidated-undrained triaxial creep tests that aim at getting hold of static mechanical properties. We can get hold of the relationship between the dry density and tensile stress etc. by Brazilian tests, between the dry density and unconfined compressive strength etc. by unconfined compression tests, between the consolidation stress and void ratio etc. by one-dimensional consolidation tests, the stress pass of each effective confining pressure etc. by consolidated-undrained triaxial compression tests and the axial strain rate with time of each axial stress etc. by consolidated-undrained triaxial creep tests. (author)

  17. Report on environmental control at the 'Boris Kidric' Institute, Vinca, Period 01.01. - 31.12.1979. Annex 3; Izvestaj o radu na kontroli okoline Instituta 'Boris Kidric', Vinca, Period 01.01. - 31.12.1979. god., Prilog 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-10-15

    This report includes description of the regular tasks performed on the territory of the 'Boris Kidric' Institute, namely, radioactivity control of water, precipitation, soil, plants, radioactivity control of aerosols and meteorology measurements. During 1979, total beta activity of aerosols in the air were measured at three measuring stations, two located in the Institute and one about three kilometers far from the Institute in the direction of the predominant wind towards Belgrade. Total of 761 samples were measured. From the obtained results it can be concluded that during the reporting period there was no environmental contamination caused by RA reactor operation. During 1979 the radioactivity of air was significantly lower compared to previous years. [Serbo-Croat] Izvestaj obuhvata prikaz standardnih poslova koji se obavljaju na teritoriji Instituta 'Boris Kidic' u Vinci, i to kontrolu radioaktivnosti voda, padavina, rastinja, zamljista, kontrolu radioaktivnosti aerosola, i meteoroloska merenja. U toku 1979. godine vrsena su merenja ukupne beta aktivnosti aerosola u vazduhu na tri merne stanice, dve u krugu Instituta a jedna na oko 3 km daleko od Instituta u pravcu predominantnog vetra prema Beogradu. Izmeren je 761 uzorak. Na osnovu dobijenih rezultata moze se zakljuciti da u ovom periodu nije bilo kontaminacije okoline usled rada nuklearnog reaktora u Institutu. Tokom 1979. godine doslo je do uocljivog opadanja readioaktivnosti vazduha u odnosu na prethodne godine.

  18. Congruence properties of induced representations

    DEFF Research Database (Denmark)

    Mayer, Dieter; Momeni, Arash; Venkov, Alexei

    In this paper we study representations of the projective modular group induced from the Hecke congruence group of level 4 with Selberg's character. We show that the well known congruence properties of Selberg's character are equivalent to the congruence properties of the induced representations...

  19. Testing properties of generic functions

    NARCIS (Netherlands)

    Jansson, P.; Jeuring, J.T.; Cabenda, L.; Engels, G.; Kleerekoper, J.; Mak, S.; Overeem, M.; Visser, Kees

    2006-01-01

    Software testing is an important part of the software devel- opment process. Testing comes in many flavours: unit testing, property testing, regression testing, contract checking, etc. QuickCheck is proba- bly one of the most advanced tools for testing properties of functional programs. It

  20. Porous Materials - Structure and Properties

    DEFF Research Database (Denmark)

    Nielsen, Anders

    1997-01-01

    The paper presents some viewpoints on the description of the pore structure and the modelling of the properties of the porous building materials. Two examples are given , where it has been possible to connect the pore structure to the properties: Shrinkage of autoclaved aerated concrete...

  1. Quantum logics with existence property

    International Nuclear Information System (INIS)

    Schindler, C.

    1991-01-01

    A quantum logic (σ-orthocomplete orthomodular poset L with a convex, unital, and separating set Δ of states) is said to have the existence property if the expectation functionals on lin(Δ) associated with the bounded observables of L form a vector space. Classical quantum logics as well as the Hilbert space logics of traditional quantum mechanics have this property. The author shows that, if a quantum logic satisfies certain conditions in addition to having property E, then the number of its blocks (maximal classical subsystems) must either be one (classical logics) or uncountable (as in Hilbert space logics)

  2. Properties and selection criteria for adsorbents

    International Nuclear Information System (INIS)

    Wirth, H.

    1976-01-01

    The paper gives a survey of the most important industrial adsorbents and of their suitability for different purposes. With special consideration of activated carbon, the properties and characteristic data are discussed which are used for assessing adsorbents. These, among other things, are as follows: specific surface area, pore size distribution, adsorption isotherms, hydrophobic properties, catalytic properties, chemical resistance, heat resistance, particle size and hardness. (orig.) [de

  3. Communication of Semantic Properties

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Boelskifte, Per

    2004-01-01

    The selection of materials and planning for production play a key role for the design of physical products. Product function, appearance and expression are influenced by the chosen materials and how they are shaped. However these properties are not carried by the material itself, but by the speci......The selection of materials and planning for production play a key role for the design of physical products. Product function, appearance and expression are influenced by the chosen materials and how they are shaped. However these properties are not carried by the material itself...... processes. This working paper argues for the need for a commonly accepted terminology used to communicate semantic product properties. Designers and others involved in design processes are dependent of a sharp and clear verbal communication. Search facilities in computer programs for product and material...

  4. Stem Properties of Autobacteria

    Directory of Open Access Journals (Sweden)

    Boris A. Berdichevskyy

    2014-03-01

    Full Text Available This paper discusses the stem properties of the autobacteria as part of the activation syndrome and persistence of the endogenous microflora in the adaptation process of the macroorganism to stress, as well as the ability of the bacteria to stimulate the cells of the macroorganism to manifest stem properties. The essence of this syndrome involves testing the tissue with the autobacteria of their "host" body to identify the foci of cellular insolvency with the subsequent inclusion of the autostrains in the implementation phase of the catabolic and anabolic inflammations. Considering the genetic tropism of the microbes to the organ-specific tissue of the area affected, the existence of the stem properties of the autobacteria is assumed to be realized in the process of reparative regeneration. The great clinical significance of further study of this phenomenon is not excluded.

  5. Development of international regulation of intellectual property

    OpenAIRE

    Schmitz Vaccaro, Christian

    2013-01-01

    In recent years we have seen a true internationalization of intellectual property laws. So today one can easily familiarize with foreign laws on intellectual property, due to their increasing uniformity and homogeneity. This is the result of numerous international treaties and two international organizations. At the multilateral level, the World Intellectual Property Organization (WIPO) administers 24 treaties on intellectual property, and for its part, the World Trade Organization (WTO) is i...

  6. Property Outlaws in Cyberspace and Meatspace? Examining the Relationship between Online Peer Production and Support for Private Property Violations

    Directory of Open Access Journals (Sweden)

    Timothy Gibson

    2014-11-01

    Full Text Available Marxian theory has long viewed the institution of private property as central to labour exploitation. After all, private property laws allow those who control the means of production to expropriate surplus value from the dispossessed. An analogous relationship arguably defines life on the Internet, where users are forced to venture onto privately owned digital enclosures to access key services. Yet these online property relationships are anything but settled and uncontested. Outside the digital enclosures of Apple and Google, the Internet has fostered the development of “commons-based peer production”, where key resources (e.g. software are produced without anyone claiming exclusive property rights. In fact, some scholars have argued that the rise of peer production on the web has begun to re-shape popular attitudes concerning the legitimacy of property exclusions more broadly. In short, as we become “property outlaws” on the web, we come to question the inevitability and legitimacy of private property elsewhere in life. This paper explores this hypothesis by reporting data from a survey of Internet users at an East Coast university. Are users who engage in more peer production activities on the web also more likely to approve of “property outlaw” behaviours not just in the online context, but in the offline world as well (e.g. squatting? The data provide only partial support for the hypothesis: active online peer producers were indeed more likely to support violations of intangible (intellectual properties, but not violations of tangible or “real-world” properties.

  7. Thermoluminescence dosimetry materials: properties and uses

    International Nuclear Information System (INIS)

    McKeever, S.W.S.; Moscovitch, M.; Townsend, P.D.

    1995-01-01

    This book selects a range of the most popular thermoluminescence dosemeter (TLD) materials in use today and provides a critical account of their thermoluminescence (TL) and dosimetric properties. The information provided includes in-depth discussions of TL mechanisms, including an account of luminescence properties, and relevant information regarding dosimetric characteristics. The book is intended for those involved in TLD materials research, and for technicians and workers involved in the practical application of these materials in TL dosimetry. The advent of modern spectroscopic methods for measuring TL emission spectra (the so-called ''3-D'' presentation) seemed to the authors to be an invitation to compile such spectra for all the major TLD materials. Further consideration led to an expansion of the initial idea to include a compilation of dosimetric properties. One intention is to provide a synopsis of the TL and dosimetric properties of the most widely used TLD materials currently available and to form a link between the solid state defect properties of these materials and their actual dosimetric properties. A second intention is to provide a solid framework from which future studies of TLD materials could be launched. Too often in the past research into TLD materials has been haphazard, to say the least. By illustrating the links between solid state physics and the radiation dosimetry properties of these materials the book points to the future and to the pressing need for enhanced research on TLD materials. (Author)

  8. Properties of Bipolar Fuzzy Hypergraphs

    OpenAIRE

    Akram, M.; Dudek, W. A.; Sarwar, S.

    2013-01-01

    In this article, we apply the concept of bipolar fuzzy sets to hypergraphs and investigate some properties of bipolar fuzzy hypergraphs. We introduce the notion of $A-$ tempered bipolar fuzzy hypergraphs and present some of their properties. We also present application examples of bipolar fuzzy hypergraphs.

  9. Introduction to Virtual Property: Lex Virtualis Ipsa Loquitur

    Directory of Open Access Journals (Sweden)

    Wian Erlank

    2015-12-01

    Full Text Available This article serves as an introduction to the concept of virtual property and also to very briefly note the relevance of virtual property in modern society. A universally accepted definition of virtual property is hard to come by, but the paper will aim to provide some clarity on the issue. Virtual property is still property, and it still exists even though it is intangible. It includes (amongst other things website addresses and email addresses as well as certain other accepted immaterial property objects such as bank accounts, stocks, options and derivatives. Indeed, one can go so far as to include digital goods, such as digital versions of books (e-books, computer or smartphone programmes or apps, television series and movies as well as digital music (albums and tracks as objects of virtual property. However, the focus in this paper is on the type of virtual property found inside virtual worlds. The discussion of virtual property will be facilitated by reference to some of the ancillary and more complicated areas of the field to serve as a point of reference leading to an understanding of the concept of virtual property in general.

  10. Environmental audits of oil and gas properties

    International Nuclear Information System (INIS)

    Moody, T.D.; Forbes, S.

    1991-01-01

    The growing concern over one, the cost of correcting environmental damage and two, the potential financial liabilities associated with the acquisition, sale or lease of oil and gas properties, has led many prospective buyers to investigate the environmental liabilities associated with the property transfer. The environmental audit provides a tool or mechanism to assist the prudent investor in identifying environmental problems that could adversely effect an otherwise normal business activity. Accordingly, an environmental audit can identify potential environmental liabilities associated with the property, thus allowing the investor an opportunity to better assess financial risks. In addition, should the negative findings of the environmental audit be limited, the findings could be used by the buyer in negotiating the final price of the subject property to account for potential or known liabilities. As this suggests, environmental damage to an oil and gas property does not necessarily render the property worthless. This paper provides a brief guide on environmental audits of oil and gas properties as well as general information on the most common exploration and production wastes

  11. Resemblance of the properties of superimposed volume holograms to the properties of human memory

    Science.gov (United States)

    Orlov, V. V.

    2006-09-01

    According to current concepts in psychology, a collection of patterns stored in human memory has the property of integrity and contains new information not contained in the individual patterns. It is shown that superimposed volume holograms possess similar properties if the information in them is written by a method that excludes the appearance of crosstalk of the holograms.

  12. Thermophysical property characterization of tris(hydroxymethyl)aminomethane

    International Nuclear Information System (INIS)

    Soriano, Allan N.; Cabahug, Denise Irene V.; Li Menghui

    2011-01-01

    In this present work, a thermophysical property characterization of aqueous solution of tris(hydroxymethyl)aminomethane (TRIS), a biological buffer, was done. The investigated properties were refractive index (n), density (ρ), and electrolytic conductivity (κ). These properties were measured for temperatures up to 353.15 K (at normal atmospheric condition) and for the entire composition range where TRIS is still soluble in water. The measured properties were reported as functions of temperature and composition. A modified form of the Vogel-Tamman-Fulcher equation which leads to an Arrhenius-type asymptotic exponential function was used to generally correlate the temperature and compositional dependence of the considered properties and satisfactory results were obtained.

  13. FINANCING INTELLECTUAL PROPERTY ASSESTS: AN EMPIRICAL ANALYSIS

    OpenAIRE

    USHA SWAMINATHAN

    2016-01-01

    Amplifying any property needs assessment to be marketable. This paper reads on the prospects of intangible property especially the Intellectual Property (IP) being evaluated in terms of financing by institutions to progressively grow more by widening their business and to make available advances based on IP. Arrangements engaging in the safety measures of intangible property encompassed and facilitated title-holders of IP privileges to comprise a loan of money as more undemanding and protecte...

  14. Physical properties of organic fullerene cocrystals

    Science.gov (United States)

    Macovez, Roberto

    2017-12-01

    The basic facts and fundamental properties of binary fullerene cocrystals are reviewed, focusing especially on solvates and salts of Buckminsterfullerene (C60), and hydrates of hydrophilic C60 derivatives. The examined properties include the lattice structure and the presence of orientational disorder and/or rotational dynamics (of both fullerenes and cocrystallizing moieties), thermodynamic properties such as decomposition enthalpies, and charge transport properties. Both thermodynamic properties and molecular orientational disorder shed light on the extent of intermolecular interactions in these binary solid-state systems. Comparison is carried out also with pristine fullerite and with the solid phases of functionalized C60. Interesting experimental findings on binary fullerene cocrystals include the simultaneous occurrence of rotations of both constituent molecular species, crystal morphologies reminiscent of quasi-crystalline behaviour, the observation of proton conduction in hydrate solids of hydrophilic fullerene derivatives, and the production of super-hard carbon materials by application of high pressures on solvated fullerene crystals.

  15. Shear and extensional properties of kefiran.

    Science.gov (United States)

    Piermaría, Judith; Bengoechea, Carlos; Abraham, Analía Graciela; Guerrero, Antonio

    2016-11-05

    Kefiran is a neutral polysaccharide constituted by glucose and galactose produced by Lactobacillus kefiranofaciens. It is included into kefir grains and has several health promoting properties. In the present work, shear and extensional properties of different kefiran aqueous dispersions (0.5, 1 and 2% wt.) were assessed and compared to other neutral gums commonly used in food, cosmetic and pharmaceutics industries (methylcellulose, locust bean gum and guar gum). Kefiran showed shear flow characteristics similar to that displayed by other representative neutral gums, although it always yielded lower viscosities at a given concentration. For each gum system it was possible to find a correlation between dynamic and steady shear properties by a master curve including both the apparent and complex viscosities. When studying extensional properties of selected gums at 2% wt. by means of a capillary break-up rheometer, kefiran solutions did not show important extensional properties, displaying a behaviour close the Newtonian. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Measuring solvent barrier properties of paper

    International Nuclear Information System (INIS)

    Bollström, Roger; Saarinen, Jarkko J; Toivakka, Martti; Räty, Jukka

    2012-01-01

    New methods for measuring barrier properties against solvents, acids and bases on dispersion coated paper were developed and investigated. Usability, reliability and repeatability were compared both between the new methods and with the standardized method for measuring barrier properties against water vapor. Barrier properties could be measured with all methods and the results obtained by the different methods were in correlation with each other. A qualitative method based on a trace color provided an indicative result, whereas further developed methods also took into account the durability. The effective barrier lifetime could be measured by measuring the conductivity through the substrate as a function of time, or by utilizing a glass prism where the change in refractive index caused by penetrated liquid was monitored, also as a function of time. Barrier properties against water and humidity were also measured and were found not to be predictors for barrier properties against either solvents, or acids or bases, which supports the need to develop new methods

  17. Determining Complementary Properties with Quantum Clones

    Science.gov (United States)

    Thekkadath, G. S.; Saaltink, R. Y.; Giner, L.; Lundeen, J. S.

    2017-08-01

    In a classical world, simultaneous measurements of complementary properties (e.g., position and momentum) give a system's state. In quantum mechanics, measurement-induced disturbance is largest for complementary properties and, hence, limits the precision with which such properties can be determined simultaneously. It is tempting to try to sidestep this disturbance by copying the system and measuring each complementary property on a separate copy. However, perfect copying is physically impossible in quantum mechanics. Here, we investigate using the closest quantum analog to this copying strategy, optimal cloning. The coherent portion of the generated clones' state corresponds to "twins" of the input system. Like perfect copies, both twins faithfully reproduce the properties of the input system. Unlike perfect copies, the twins are entangled. As such, a measurement on both twins is equivalent to a simultaneous measurement on the input system. For complementary observables, this joint measurement gives the system's state, just as in the classical case. We demonstrate this experimentally using polarized single photons.

  18. Magnetic properties of metals and alloys

    International Nuclear Information System (INIS)

    Lyuborskij, F.E.; Livingston, D.D.; Chin, Zh.I.

    1987-01-01

    The nature of magnetic properties of materials and their dependence on the composition and the material structure are described. Properties and application of such materials as the alloys of the Fe-Ni-Co, Fe-Cr-Co, Co-rare earth, Fe-Si, Ni-Se system are considered. Application outlook for amorphous alloys of the (Fe, Ni, Co) 80 (metalloid) 20 type is shown. Methods for magnetic property measurement are pointed out

  19. Computing Mass Properties From AutoCAD

    Science.gov (United States)

    Jones, A.

    1990-01-01

    Mass properties of structures computed from data in drawings. AutoCAD to Mass Properties (ACTOMP) computer program developed to facilitate quick calculations of mass properties of structures containing many simple elements in such complex configurations as trusses or sheet-metal containers. Mathematically modeled in AutoCAD or compatible computer-aided design (CAD) system in minutes by use of three-dimensional elements. Written in Microsoft Quick-Basic (Version 2.0).

  20. BASIC PROPERTIES IN RELATION TO DRYING PROPERTIES OF THREE WOOD SPECIES FROM INDONESIA

    Directory of Open Access Journals (Sweden)

    Efrida Basri

    2005-03-01

    Full Text Available The objectives of this study were to investigate basic and drying properties of three wood species from Indonesia, i.e. kuda (Lannea coromandelica Merr., waru (Hibiscus tiliaceus L. and mindi besar (Melia dubia Cav.. The basic properties include density, shrinkages, modulus of rupture (MOR, compression parallel to grain (C//, wood strength and anatomical structures. Meanwhile, the drying properties included drying time and drying defects. The initial-final temperature and humidity for each species was based on defects that resulted from high temperature drying trial. The results showed that the drying properties were significantly affected by wood anatomical structure. The initial-final drybulb temperature and wetbulb depression   for kuda wood are 50 -70ºC and 3-30ºC respectively, while the corresponding figures for waru wood are 65-80ºC and 6-30ºC, and for mindi besar wood are 55-80ºC and 4-30ºC. These drying schedules, however, still need further trial prior to their implementation in the factory-scale operation. All wood species studied have density and considerable strength recommended in their use for light medium construction purposes. Mindi besar wood has decorative appearance so it is suitable for furniture.

  1. Radiation modification of the properties of polypropylene

    Indian Academy of Sciences (India)

    ... were used to investigate some selected properties such as thermal properties, ... The properties of original and irradiated PP/15wt% CMC blend were investigated. ... 5, 10 and 20 kGy were subjected to biodegradation in soil burial tests for 6 ...

  2. 40 CFR 35.6335 - Property management standards.

    Science.gov (United States)

    2010-07-01

    ... ASSISTANCE STATE AND LOCAL ASSISTANCE Cooperative Agreements and Superfund State Contracts for Superfund Response Actions Personal Property Requirements Under A Cooperative Agreement § 35.6335 Property management... the property; (5) Provisions for financial control and accounting in the financial management system...

  3. Testing properties of generic functions

    NARCIS (Netherlands)

    Jansson, P.; Jeuring, J.T.; Cabenda, L.; Engels, G.; Kleerekoper, J.; Mak, S.; Overeem, M.; Visser, Kees

    2007-01-01

    A datatype-generic function is a family of functions indexed by (the structure of) a type. Examples include equality tests, maps and pretty printers. Property based testing tools like QuickCheck and Gast support the de¯nition of properties and test-data generators, and they check if a

  4. Property and Human Genetic Information

    DEFF Research Database (Denmark)

    Nielsen, Morten Ebbe Juul; Kongsholm, Nana Cecilie Halmsted; Schovsbo, Jens Hemmingsen

    2018-01-01

    Do donors (of samples from which genetic information is derived) have some sort of pre-legal (moral) or legal property right tothat information? In this paper, we address this question from both a moral philosophical and a legal point of view. We argue thatphilosophical theories about property do...

  5. Properties of auxiliary filtering materials

    Energy Technology Data Exchange (ETDEWEB)

    Rudenko, L.I.; Sklyar, V.T.

    1981-01-01

    The authors have studied the physicochemical and filtering properties of the perlites FP-1 and FP-2, kieselguhr, diatomite, asbestos, wood pulp, and the diatomite powders Spidplace and Saperaid. They propose a classification for filtering materials according to their properties when mechanical impurities are being removed from the additives.

  6. Ultracold gas shows 'lopsided' properties

    CERN Multimedia

    2002-01-01

    "Duke University researchers have created an ultracold gas that has the startling property of bursting outward in a preferred direction when released. According to the researchers, studying the properties of the "lopsided" gas will yield fundamental insights into how matter holds itself together at the subatomic level" (1 page).

  7. Functional properties of α-lactalbumin and β-lactoglobulin

    Directory of Open Access Journals (Sweden)

    Zoran Herceg

    2004-06-01

    Full Text Available Whey proteins are commonly used in the food industry due to their nutritive value and functional properties. The most important functional properties of whey proteins are solubility, viscosity, water holding capacity, emulsification and foaming. The aim of this study was to determine functional properties of main whey protein fractions (α-lactalbumin and β-lactoglobulin which have the biggest influence on the functional properties of whey proteins. Particle size analysis and specific area of α-lactalbumin and β-lactoglobulin were performed by «Mie – theory» of «light scatering» using «Malvern Mastersizer X». The results of this analysis have shown that β-lactoglobulin had higher particle size and specific area than α-lactalbumin.By examining functional properties (solubility, dispersibility, emulsifiying properties – emulsion activity index (EAI and emulsion stability index (ESI and foaming properties of α-lactalbumin and β-lactoglobulin, it has been established that β-lactoglobulin has higher solubility, dispersibility, emulsifiying properties as well as foaming properties than α-lactalbumin. Rheological properties of protein suspensions were determined by rotational viscosimeter, Brookfiel DV-III at temperature 25°C. Rheological parameters, flow behavior indeks (n and consistency coefficient (k were determined by the power-law model. The results of investigation have shown that 10% suspenzion of α-lactalbumin and β-lactoglobulin are non-Newtonian fluids and they exhibited pseudoplastic properties.

  8. Elastic and transport properties in polycrystals of crackedgrains: Cross-property relations and microstructure

    Energy Technology Data Exchange (ETDEWEB)

    Berryman, J.G.

    2007-10-02

    Some arguments of Bristow (1960) concerning the effects of cracks on elastic and transport (i.e., electrical or thermal conduction) properties of cold-worked metals are reexamined. The discussion is posed in terms of a modern understanding of bounds and estimates for physical properties of polycrystals--in contrast to Bristow's approach using simple mixture theory. One type of specialized result emphasized here is the cross-property estimates and bounds that can be obtained using the methods presented. Our results ultimately agree with those of Bristow, i.e., confirming that microcracking is not likely to be the main cause of the observed elastic behavior of cold-worked metals. However, it also becomes clear that the mixture theory approach to the analysis is too simple and that crack-crack interactions are necessary for proper quantitative study of Bristow's problem.

  9. SiC/SiC Cladding Materials Properties Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Snead, Mary A. [Brookhaven National Lab. (BNL), Upton, NY (United States); Katoh, Yutai [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Koyanagi, Takaaki [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Singh, Gyanender P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-08-01

    When a new class of material is considered for a nuclear core structure, the in-pile performance is usually assessed based on multi-physics modeling in coordination with experiments. This report aims to provide data for the mechanical and physical properties and environmental resistance of silicon carbide (SiC) fiber–reinforced SiC matrix (SiC/SiC) composites for use in modeling for their application as accidenttolerant fuel cladding for light water reactors (LWRs). The properties are specific for tube geometry, although many properties can be predicted from planar specimen data. This report presents various properties, including mechanical properties, thermal properties, chemical stability under normal and offnormal operation conditions, hermeticity, and irradiation resistance. Table S.1 summarizes those properties mainly for nuclear-grade SiC/SiC composites fabricated via chemical vapor infiltration (CVI). While most of the important properties are available, this work found that data for the in-pile hydrothermal corrosion resistance of SiC materials and for thermal properties of tube materials are lacking for evaluation of SiC-based cladding for LWR applications.

  10. luminescence properties

    Indian Academy of Sciences (India)

    1Faculty of Science and Arts, Department of Chemistry, Bozok University, Yozgat 66900, Turkey. 2Faculty of Science, Department of Chemistry, Erciyes ... synthesized by the conventional solid-state reaction method, their crystal structures and luminescence properties were investigated. X-ray diffraction patterns (XRD) ...

  11. Distinct Reward Properties are Encoded via Corticostriatal Interactions

    OpenAIRE

    David V. Smith; Anastasia E. Rigney; Mauricio R. Delgado

    2016-01-01

    The striatum serves as a critical brain region for reward processing. Yet, understanding the link between striatum and reward presents a challenge because rewards are composed of multiple properties. Notably, affective properties modulate emotion while informative properties help obtain future rewards. We approached this problem by emphasizing affective and informative reward properties within two independent guessing games. We found that both reward properties evoked activation within the nu...

  12. Chronic alcohol abuse in men alters bone mechanical properties by affecting both tissue mechanical properties and microarchitectural parameters.

    Science.gov (United States)

    Cruel, M; Granke, M; Bosser, C; Audran, M; Hoc, T

    2017-06-01

    Alcohol-induced secondary osteoporosis in men has been characterized by higher fracture prevalence and a modification of bone microarchitecture. Chronic alcohol consumption impairs bone cell activity and results in an increased fragility. A few studies highlighted effects of heavy alcohol consumption on some microarchitectural parameters of trabecular bone. But to date and to our knowledge, micro- and macro-mechanical properties of bone of alcoholic subjects have not been investigated. In the present study, mechanical properties and microarchitecture of trabecular bone samples from the iliac crest of alcoholic male patients (n=15) were analyzed and compared to a control group (n=8). Nanoindentation tests were performed to determine the tissue's micromechanical properties, micro-computed tomography was used to measure microarchitectural parameters, and numerical simulations provided the apparent mechanical properties of the samples. Compared to controls, bone tissue from alcoholic patients exhibited an increase of micromechanical properties at tissue scale, a significant decrease of apparent mechanical properties at sample scale, and significant changes in several microarchitectural parameters. In particular, a crucial role of structure model index (SMI) on mechanical properties was identified. 3D microarchitectural parameters are at least as important as bone volume fraction to predict bone fracture risk in the case of alcoholic patients. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  13. THz Properties of Adhesives

    Science.gov (United States)

    Stübling, E.; Gomell, L.; Sommer, S.; Winkel, A.; Kahlmeyer, M.; Böhm, S.; Koch, M.

    2018-06-01

    We determined the THz properties of 12 different adhesives which are mainly used for industrial purposes. The adhesives applied can be classified according to their chemical structure: epoxy resins, acrylic resins, and polyurethane based materials. This work represents a basis for future studies, which will concentrate on aging effects, including the absorption of water of adhesive joints. Thus, the dielectric properties of the unaged adhesives are investigated and the results of these measurements are described herein.

  14. Properties of Ambiguity Functions

    OpenAIRE

    Mulcahy-Stanislawczyk, John

    2014-01-01

    The use of ambiguity functions in radar signal design and analysis is very common. Understanding the various properties and meanings of ambiguity functions allow a signal designer to understand the time delay and doppler shift properties of a given signal. Through the years, several different versions of the ambiguity function have been used. Each of these functions essentially have the same physical meaning; however, the use of different functions makes it difficult to be sure that certai...

  15. Property, care, and environment

    OpenAIRE

    John O'Neill

    2001-01-01

    One influential approach to environmental problems holds that their solution requires the definition of full liberal property rights over goods that will enable their value to be registered in actual or hypothetical markets. How adequate is that solution? In this paper I offer reasons to be sceptical, by placing recent liberal arguments in the context of older debates about property, in particular those concerned with the distribution of care. Although proposals for the extension of liberal p...

  16. Macroscopic properties of model disordered materials

    International Nuclear Information System (INIS)

    Knackstedt, M.A.; Roberts, A.P.

    1996-01-01

    Disordered materials are ubiquitous in nature and in industry. Soils, sedimentary rocks, wood, bone, polymer composites, foams, catalysts, gels, concretes and ceramics have properties that depend on material structure. Present techniques for predicting properties are limited by the theoretical and computational difficulty of incorporating a realistic description of material structure. A general model for microstructure was recently proposed by Berk [Berk, Phys.Rev.A, 44 5069 (1991)]. The model is based on level cuts of a Gaussian random field with arbitrary spectral density. The freedom in specifying the parameters of the model allows the modeling of physical materials with diverse morphological characteristics. We have shown that the model qualitatively accounts for the principal features of a wider variety of disordered materials including geologic media, membranes, polymer blends, ceramics and foams. Correlation functions are derived for the model microstructure. From this characterisation we derive mechanical and conductive properties of the materials. Excellent agreement with experimentally measured properties of disordered solids is obtained. The agreement provides a strong hint that it is now possible to correlate effective physical properties of porous solids to microstructure. Simple extensions to modelling properties of non-porous multicomponent blends; metal alloys, ceramics, metal/matrix and polymer composites are also discussed

  17. Cylinder Symmetric Measures with the Tail Property

    NARCIS (Netherlands)

    Balkema, A.A.

    2006-01-01

    Abstract: A Pareto distribution has the property that any tail of the distribution has the same shape as the original distribution. The exponential distribution and the uniform distribution have the tail property too. The tail property characterizes the univariate generalized Pareto distributions.

  18. Handbook of organic solvent properties

    CERN Document Server

    Smallwood, Ian

    2012-01-01

    The properties of 72 of the most commonly used solvents are given, tabulated in the most convenient way, making this book a joy for industrial chemists to use as a desk reference. The properties covered are those which answer the basic questions of: Will it do the job? Will it harm the user? Will it pollute the air? Is it easy to handle? Will it pollute the water? Can it be recovered or incinerated? These are all factors that need to be considered at the early stages of choosing a solvent for a new product or process.A collection of the physical properties of most commonly used solvents, their

  19. Thermal Properties Measurement Report

    Energy Technology Data Exchange (ETDEWEB)

    Carmack, Jon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Braase, Lori [Idaho National Lab. (INL), Idaho Falls, ID (United States); Papesch, Cynthia [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hurley, David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tonks, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Yongfeng [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gofryk, Krzysztof [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason [Idaho National Lab. (INL), Idaho Falls, ID (United States); Fielding, Randy [Idaho National Lab. (INL), Idaho Falls, ID (United States); Knight, Collin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meyer, Mitch [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-08-01

    The Thermal Properties Measurement Report summarizes the research, development, installation, and initial use of significant experimental thermal property characterization capabilities at the INL in FY 2015. These new capabilities were used to characterize a U3Si2 (candidate Accident Tolerant) fuel sample fabricated at the INL. The ability to perform measurements at various length scales is important and provides additional data that is not currently in the literature. However, the real value of the data will be in accomplishing a phenomenological understanding of the thermal conductivity in fuels and the ties to predictive modeling. Thus, the MARMOT advanced modeling and simulation capability was utilized to illustrate how the microstructural data can be modeled and compared with bulk characterization data. A scientific method was established for thermal property measurement capability on irradiated nuclear fuel samples, which will be installed in the Irradiated Material Characterization Laboratory (IMCL).

  20. WOOD PROPERTIES AND EFFECT OF WOOD PROPERTIES ON THE WOOD FINISHING

    Directory of Open Access Journals (Sweden)

    Abdulkadir Malkoçoğlu

    2006-04-01

    Full Text Available Wood is basic raw material for furniture and joinery industries with wood structures. Wood is a biological material that has widely different properties depending on species, geographic area where the tree grew, the growth condition, size of the tree at harvest, sawing, and other manufacturing processes. Wood properties have been characterized within two groups as natural and manufacturing factors that effects finishing performance. Grow rate, density, knots, moisture content, extractives and juvenile wood are natural characteristics. Grain orientation, texture, drying and performance expectations are manufacturing characteristics. In this review, the effects of natural and manufacturing characteristics are discussed on the surface finishing performance of wood.

  1. Luminescence properties of a nanoporous freshwater diatom.

    Science.gov (United States)

    Goswami, Bondita; Choudhury, Amarjyoti; Buragohain, Alak K

    2012-01-01

    Freshwater diatom frustules show special optical properties. In this paper we observed luminescence properties of the freshwater diatom Cyclotella meneghiniana. To confirm the morphological properties we present scanning electron microscopy (SEM) images. X-ray diffraction (XRD) studies were carried out to visualize the structural properties of the frustules, confirming that silica present in diatom frustules crystallizes in an α-quartz structure. Study of the optical properties of the silica frustules of diatoms using ultra-violet-visible (UV-vis) spectroscopy and photoluminescence spectroscopy confirmed that the diatom C. meneghiniana shows luminescence in the blue region of the electromagnetic spectrum when irradiated with UV light. This property of diatoms can be exploited to obtain many applications in day-to-day life. Also, using time-resolved photoluminescence spectroscopy (TRPL) it was confirmed that this species of diatom shows bi-exponential decay. Copyright © 2011 John Wiley & Sons, Ltd.

  2. Group-Contribution based Property Estimation and Uncertainty analysis for Flammability-related Properties

    DEFF Research Database (Denmark)

    Frutiger, Jerome; Marcarie, Camille; Abildskov, Jens

    2016-01-01

    regression and outlier treatment have been applied to achieve high accuracy. Furthermore, linear error propagation based on covariance matrix of estimated parameters was performed. Therefore, every estimated property value of the flammability-related properties is reported together with its corresponding 95......%-confidence interval of the prediction. Compared to existing models the developed ones have a higher accuracy, are simple to apply and provide uncertainty information on the calculated prediction. The average relative error and correlation coefficient are 11.5% and 0.99 for LFL, 15.9% and 0.91 for UFL, 2...

  3. The integration of elastic wave properties and machine learning for the distribution of petrophysical properties in reservoir modeling

    Science.gov (United States)

    Ratnam, T. C.; Ghosh, D. P.; Negash, B. M.

    2018-05-01

    Conventional reservoir modeling employs variograms to predict the spatial distribution of petrophysical properties. This study aims to improve property distribution by incorporating elastic wave properties. In this study, elastic wave properties obtained from seismic inversion are used as input for an artificial neural network to predict neutron porosity in between well locations. The method employed in this study is supervised learning based on available well logs. This method converts every seismic trace into a pseudo-well log, hence reducing the uncertainty between well locations. By incorporating the seismic response, the reliance on geostatistical methods such as variograms for the distribution of petrophysical properties is reduced drastically. The results of the artificial neural network show good correlation with the neutron porosity log which gives confidence for spatial prediction in areas where well logs are not available.

  4. Mangold Property Management, Inc. Information Sheet

    Science.gov (United States)

    Mangold Property Management, Inc. (the Company) is located in Monterey, California. The settlement involves the lease of properties constructed prior to 1978, located in Salinas and Monterey, California.

  5. 26 CFR 1.817-3 - Gain on property held on December 31, 1958, and certain substituted property acquired after 1958.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Gain on property held on December 31, 1958, and... Provisions § 1.817-3 Gain on property held on December 31, 1958, and certain substituted property acquired after 1958. (a) Limitation on gain recognized on property held on December 31, 1958. (1) Section 817(b...

  6. Sediment Properties: E-Area Completion Project

    Energy Technology Data Exchange (ETDEWEB)

    Millings, M.; Bagwell, L.; Amidon, M.; Dixon, K.

    2011-04-29

    To accommodate a future need for additional waste disposal facilities at the Savannah River Site, the Solid Waste Management Division (SWMD) designated nine additional plots for development (Kasraii 2007; SRS 2010); these plots are collectively known as the E Area Completion Project (ECP). Subsurface samples were collected from ECP plots 6, 7, 8 and 9 (Figure 1) for chemical and physical property analyses to support Performance Assessment (PA) and Special Analyses (SA) modeling. This document summarizes the sampling and analysis scheme and the resultant data, and provides interpretations of the data particularly in reference to existing soil property data. Analytical data in this document include: gamma log, cone penetrometer log, grain size (sieve and hydrometer), water retention, saturated hydraulic conductivity (falling head permeameter), porosity, dry bulk density, total organic carbon, x-ray diffraction, and x-ray fluorescence data. SRNL provided technical and safety oversight for the fieldwork, which included completion of eight soil borings, four geophysical logs, and the collection of 522 feet of core and 33 Shelby tubes from ECP plots 6, 7, 8, and 9. Boart Longyear provided sonic drilling and logging services. Two soil borings were completed at each location. The first set of boreholes extended into (but did not fully penetrate) the Warley Hill Formation. These boreholes were continuously cored, then geophysically (gamma ray) logged. The recovered core was split, photographed, and described; one half of the core was archived at SRS's Core Lab facilities, and the remaining half was consumed as necessary for testing at SRS and off-site labs. Core descriptions and geophysical data were used to calculate target elevations for Shelby tube samples, which were obtained from the second set of boreholes. Shelby tubes were shipped to MACTEC Engineering and Consulting Inc. (MACTEC) in Atlanta for physical property testing. SRNL deployed their Site

  7. Mechanical properties of rock at high temperatures

    International Nuclear Information System (INIS)

    Kinoshita, Naoto; Abe, Tohru; Wakabayashi, Naruki; Ishida, Tsuyoshi.

    1997-01-01

    The laboratory tests have been performed in order to investigate the effects of temperature up to 300degC and pressure up to 30 MPa on the mechanical properties of three types of rocks, Inada granite, Sanjoume andesite and Oya tuff. The experimental results indicated that the significant differences in temperature dependence of mechanical properties exist between the three rocks, because of the difference of the factors which determine the mechanical properties of the rocks. The effect of temperature on the mechanical properties for the rocks is lower than that of pressure and water content. Temperature dependence of the mechanical properties is reduced by increase in pressure in the range of pressure and temperature investigated in this paper. (author)

  8. 22 CFR 226.37 - Property trust relationship.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Property trust relationship. 226.37 Section 226.37 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Property Standards § 226.37 Property trust...

  9. 41 CFR 101-4.120 - Transfers of property.

    Science.gov (United States)

    2010-07-01

    ... EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction § 101-4.120 Transfers... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Transfers of property. 101-4.120 Section 101-4.120 Public Contracts and Property Management Federal Property Management...

  10. Thermal-Insulation Properties of Multilayer Textile Packages

    Directory of Open Access Journals (Sweden)

    Matusiak Małgorzata

    2014-12-01

    Full Text Available Thermal-insulation properties of textile materials play a significant role in material engineering of protective clothing. Thermal-insulation properties are very important from the point of view of thermal comfort of the clothing user as well as the protective efficiency against low or high temperature. Thermal protective clothing usually is a multilayer construction. Its thermal insulation is a resultant of a number of layers and their order, as well as the thermalinsulation properties of a single textile material creating particular layers. The aim of the presented work was to investigate the relationships between the thermal-insulation properties of single materials and multilayer textile packages composed of these materials. Measurement of the thermal-insulation properties of single and multilayer textile materials has been performed with the Alambeta. The following properties have been investigated: thermal conductivity, resistance and absorptivity. Investigated textile packages were composed of two, three and four layers made of woven and knitted fabrics, as well as nonwovens. On the basis of the obtained results an analysis has been carried out in order to assess the dependency of the resultant values of the thermal-insulation properties of multilayer packages on the appropriate values of particular components.

  11. Dielectric properties of agricultural materials and their applications

    CERN Document Server

    Nelson, Stuart

    2015-01-01

    Dielectric Properties of Agricultural Materials and Their Applications provides an understanding of the fundamental principles governing dielectric properties of materials, describes methods for measuring such properties, and discusses many applications explored for solving industry problems. The information in this reference stimulates new research for solving problems associated with production, handling, and processing of agricultural and food products. Anyone seeking a better understanding of dielectric properties of materials and application of radio-frequency and microwave electromagnetic energy for solution of problems in agriculture and related fields will find this an essential resource. Presents applications of dielectric properties for sensing moisture in grain and seed and the use of such properties in radio-frequency and microwave dielectric heating of agricultural materials Offers information for finding correlations between dielectric properties and quality attributes such as sweetness in melon...

  12. 26 CFR 301.7321-1 - Seizure of property.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Seizure of property. 301.7321-1 Section 301... ADMINISTRATION PROCEDURE AND ADMINISTRATION Other Offenses § 301.7321-1 Seizure of property. Any property subject... director or assistant regional commissioner (alcohol, tobacco, and firearms). Upon seizure of property by...

  13. 7 CFR 501.3 - Preservation of property.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Preservation of property. 501.3 Section 501.3 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL RESEARCH SERVICE, DEPARTMENT... Preservation of property. It is unlawful to willfully destroy, damage, or remove property or any part thereof...

  14. 7 CFR 502.3 - Preservation of property.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Preservation of property. 502.3 Section 502.3 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL RESEARCH SERVICE, DEPARTMENT....3 Preservation of property. It is unlawful to willfully destroy, damage, or remove property or any...

  15. 14 CFR 1274.402 - Contractor acquired property.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Contractor acquired property. 1274.402 Section 1274.402 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION COOPERATIVE AGREEMENTS WITH COMMERCIAL FIRMS Property § 1274.402 Contractor acquired property. As provided in § 1274.923...

  16. Cellulose nanomaterials review: structure, properties and nanocomposites

    Science.gov (United States)

    Robert J. Moon; Ashlie Martini; John Nairn; John Simonsen; Jeff Youngblood

    2011-01-01

    This critical review provides a processing-structure-property perspective on recent advances in cellulose nanoparticles and composites produced from them. It summarizes cellulose nanoparticles in terms of particle morphology, crystal structure, and properties. Also described are the self-assembly and rheological properties of cellulose nanoparticle suspensions. The...

  17. Physical Properties of Hanford Transuranic Waste

    Energy Technology Data Exchange (ETDEWEB)

    Berg, John C.

    2010-03-25

    The research described herein was undertaken to provide needed physical property descriptions of the Hanford transuranic tank sludges under conditions that might exist during retrieval, treatment, packaging and transportation for disposal. The work addressed the development of a fundamental understanding of the types of systems represented by these sludge suspensions through correlation of the macroscopic rheological properties with particle interactions occurring at the colloidal scale in the various liquid media. The results of the work have advanced existing understanding of the sedimentation and aggregation properties of complex colloidal suspensions. Bench scale models were investigated with respect to their structural, colloidal and rheological properties that should be useful for the development and optimization of techniques to process the wastes at various DOE sites.

  18. The Electrochemical Properties of Biochars and How They Affect Soil Redox Properties and Processes

    Directory of Open Access Journals (Sweden)

    Stephen Joseph

    2015-07-01

    Full Text Available Biochars are complex heterogeneous materials that consist of mineral phases, amorphous C, graphitic C, and labile organic molecules, many of which can be either electron donors or acceptors when placed in soil. Biochar is a reductant, but its electrical and electrochemical properties are a function of both the temperature of production and the concentration and composition of the various redox active mineral and organic phases present. When biochars are added to soils, they interact with plant roots and root hairs, micro-organisms, soil organic matter, proteins and the nutrient-rich water to form complex organo-mineral-biochar complexes Redox reactions can play an important role in the development of these complexes, and can also result in significant changes in the original C matrix. This paper reviews the redox processes that take place in soil and how they may be affected by the addition of biochar. It reviews the available literature on the redox properties of different biochars. It also reviews how biochar redox properties have been measured and presents new methods and data for determining redox properties of fresh biochars and for biochar/soil systems.

  19. Geotechnical properties of rock

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, R.; Gorski, B.; Gyenge, M.

    1995-12-31

    The manual is a compilation of the geotechnical properties of many types of rock that are typical of Canadian mining environments. Included are values for density, porosity, compressive and shear wave velocity, uniaxial compressive strength, Young`s modulus, and Poisson`s ratio. The data base contains material constants that were determined using the Hoek and Brown failure criteria for both before and after failure conditions. 76 data sheets of rock properties in Canadian mines are included. 7 refs., 85 figs., 3 tabs.

  20. Properties of gluon jets

    International Nuclear Information System (INIS)

    Sugano, K.

    1987-01-01

    The properties of gluon jets are reviewed, and the measured characteristics are compared to the theoretical expectations. Although neither data nor models for the gluon jets are in the mature stage, in general the agreement between experiment and theory is remarkable. There are some intriguing differences. Since the properties of gluon jets are deeply rooted in the basic structure of non-Abelian gauge theory, the study of gluon jets casts further light on our understanding of QCD. Finally, the future prospects are discussed

  1. Elastic and viscoplastic properties

    International Nuclear Information System (INIS)

    Lebensohn, R.A.

    2015-01-01

    In this chapter, we review crystal elasticity and plasticity-based self-consistent theories and apply them to the determination of the effective response of polycrystalline aggregates. These mean-field formulations, which enable the prediction of the mechanical behaviour of polycrystalline aggregates based on the heterogeneous and/or directional properties of their constituent single crystal grains and phases, are ideal tools to establish relationships between microstructure and properties of these materials, ubiquitous among fuels and structural materials for nuclear systems. (author)

  2. Pure and Pseudo-pure Fluid Thermophysical Property Evaluation and the Open-Source Thermophysical Property Library CoolProp

    DEFF Research Database (Denmark)

    Bell, Ian H.; Wronski, Jorrit; Quoilin, Sylvain

    2014-01-01

    property correlations described here have been implemented into CoolProp, an open-source thermophysical property library. This library is written in C++, with wrappers available for the majority of programming languages and platforms of technical interest. As of publication, 110 pure and pseudo-pure fluids...... are included in the library, as well as properties of 40 incompressible fluids and humid air. The source code for the CoolProp library is included as an electronic annex....

  3. Property rights institutions and investment

    OpenAIRE

    Saleh, Jahangir

    2004-01-01

    This paper examines the channels through which alternative property rights institutions affect investment. These institutions are defined by a society's enforced laws, regulations, governance mechanisms and norms concerning the use of resources. A transaction cost framework is used to analyze the incentive impact of various types of property rights, liability rules, and rules regarding con...

  4. Property rating potentials and hurdles: what can be done to boost property rating in Ghana?

    Directory of Open Access Journals (Sweden)

    Elias Danyi Kuusaana

    2015-06-01

    Full Text Available Population growth in many of Africa’s towns and cities has outpaced local authority capacity to provide efficient management, infrastructure and financing. There is already debate over the capability and capacity of urban local governments to provide basic services to a growing population, due to budget constraints and inability to raise the required local-level revenue. This paper looks at how the potential of property rating can be harnessed to generate the bulk of revenue needed for local-level development, despite the huge default rates across Ghana. Focusing on Wa Municipality as a case study, the study finds that the major hurdles to property rating are poor property data systems, political interference, non-enforcement of the law, low budget deficit in financing revaluation, insufficient staffing, and insufficient technical capacity of the few staff available at the municipal valuation and rating divisions. Despite these constraints, however, field data still indicates that property rating in Ghana, and especially in Wa Municipality, can generate up to 30% of local government revenue needed. This is conditional on streamlining current challenges and improving resources for the rating and valuation units. There is extensive non-payment of property rates in Wa Municipality due to lack of awareness of the purpose of this tax, of how to pay and of the penalties for defaulting payees.

  5. Microstructure, mechanical properties, bio-corrosion properties and cytotoxicity of as-extruded Mg-Sr alloys.

    Science.gov (United States)

    Zhao, Chaoyong; Pan, Fusheng; Zhang, Lei; Pan, Hucheng; Song, Kai; Tang, Aitao

    2017-01-01

    In this study, as-extruded Mg-Sr alloys were studied for orthopedic application, and the microstructure, mechanical properties, bio-corrosion properties and cytotoxicity of as-extruded Mg-Sr alloys were investigated by optical microscopy, scanning electron microscopy with an energy dispersive X-ray spectroscopy, X-ray diffraction, tensile and compressive tests, immersion test, electrochemical test and cytotoxicity test. The results showed that as-extruded Mg-Sr alloys were composed of α-Mg and Mg 17 Sr 2 phases, and the content of Mg 17 Sr 2 phases increased with increasing Sr content. As-extruded Mg-Sr alloy with 0.5wt.% Sr was equiaxed grains, while the one with a higher Sr content was long elongated grains and the grain size of the long elongated grains decreased with increasing Sr content. Tensile and compressive tests showed an increase of both tensile and compressive strength and a decrease of elongation with increasing Sr content. Immersion and electrochemical tests showed that as-extruded Mg-0.5Sr alloy exhibited the best anti-corrosion property, and the anti-corrosion property of as-extruded Mg-Sr alloys deteriorated with increasing Sr content, which was greatly associated with galvanic couple effect. The cytotoxicity test revealed that as-extruded Mg-0.5Sr alloy did not induce toxicity to cells. These results indicated that as-extruded Mg-0.5Sr alloy with suitable mechanical properties, corrosion resistance and good cytocompatibility was potential as a biodegradable implant for orthopedic application. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. Tensile properties of orthodontic elastomeric ligatures.

    Science.gov (United States)

    Ahrari, F; Jalaly, T; Zebarjad, M

    2010-01-01

    Tensile properties of elastomeric ligatures become important when efficiency of orthodontic appliances is considered. The aim of this study was to compare tensile strength, extension to tensile strength, toughness and modulus of elasticity of elastomeric ligatures in both the as--received condition and after 28 days of immersion in the simulated oral environment. Furthermore, the changes that occurred in tensile properties of each brand of ligatures after 28 days were evaluated. Experimental-laboratory based. Elastomeric ligatures were obtained from different companies and their tensile properties were measured using Zwick testing machine in both the as-received condition and after 28 days of immersion in the simulated oral environment. The data were analyzed using independent sample t-tests, analysis of variance and Tukey tests. After 28 days, all the ligatures experienced a significant decrease in tensile strength, extension to tensile strength and toughness ( P tensile properties of different brands of ligatures in both conditions ( P tensile properties of different brands of ligatures, which should be considered during selection of these products.

  7. Elevated temperature effects on concrete properties

    International Nuclear Information System (INIS)

    Grant, P.R.; Gruber, R.S.; Van Katwijk, C.

    1993-08-01

    The design of facilities to process or store radioactive wastes presents many challenging engineering problems. Such facilities must not only provide for safe storage of radioactive wastes but they must also be able to maintain confinement of these materials during and after natural phenomena events. Heat generated by the radioactive decay of the wastes will cause the temperature of the concrete containment structure to increase to a magnitude higher than that found in conventional structures. These elevated temperatures will cause strength-related concrete properties to degrade over time. For concrete temperatures less than 150 degree F, no reduction in strength is taken and the provisions of ACI 349, which states that higher temperatures are allowed if tests are provided to evaluate the reduction in concrete strength properties, apply. Methods proposed in a Pacific Northwest Laboratory (PNL) report, Modeling of Time-Variant Concrete Properties at Elevated Temperatures, can be used to evaluate the effects of elevated temperatures on concrete properties. Using these modified concrete properties the capacity of a concrete structure, subjected to elevated temperatures, to resist natural phenomena hazards can be determined

  8. GEOPHYSICAL PROPERTIES OF SOILS

    KAUST Repository

    Santamarina, Carlos

    2016-12-01

    Low energy perturbations used in geophysical methods provide insightful information about constant-fabric soil properties and their spatial variability. There are causal links between soil type, index properties, elastic wave velocity, electromagnetic wave parameters and thermal properties. Soil type relates to the stress-dependent S-wave velocity, thermal and electrical conductivity and permittivity. The small strain stiffness reflects the state of stress, the extent of diagenetic cementation and/or freezing. Pore fluid chemistry, fluid phase and changes in either fluid chemistry or phase manifest through electromagnetic measurements. The volumetric water content measured with electromagnetic techniques is the best predictor of porosity if the water saturation is 100%. Changes in water saturation alter the P-wave velocity when Srà100%, the S-wave velocity at intermediate saturations, and the thermal conductivity when the saturation is low Srà0%. Finally, tabulated values suffice to estimate heat capacity and latent heat for engineering design, however thermal conductivity requires measurements under proper field conditions.

  9. Intellectual property rights in nanotechnology

    International Nuclear Information System (INIS)

    Bastani, Behfar; Fernandez, Dennis

    2002-01-01

    Intellectual property (IP) rights are essential in today's technology-driven age. Building a strategic IP portfolio is economically important from both an offensive and defensive standpoint. After an introduction to intellectual property rights and acquisitions, we provide an overview of current efforts in nanotechnology. Research into nano-scale materials and devices and requirements for their efficient mass production are outlined, with focus on the applicable IP rights and strategies. We present current and future applications of nanotechnology to such fields as electronics, sensors, aerospace, medicine, environment and sanitation, together with the IP rights that can be brought to bear in each. Finally, some challenging issues surrounding the acquisition of intellectual property rights in nanotechnology are presented

  10. Absorption properties of identical atoms

    International Nuclear Information System (INIS)

    Sancho, Pedro

    2013-01-01

    Emission rates and other optical properties of multi-particle systems in collective and entangled states differ from those in product ones. We show the existence of similar effects in the absorption probabilities for (anti)symmetrized states of two identical atoms. The effects strongly depend on the overlapping between the atoms and differ for bosons and fermions. We propose a viable experimental verification of these ideas. -- Highlights: •The absorption rates of a pair of identical atoms in product and (anti)symmetrized states are different. •The modifications of the optical properties are essentially determined by the overlapping between the atoms. •The absorption properties differ, in some cases, for bosons and fermions

  11. Analysis of Hydrologic Properties Data

    International Nuclear Information System (INIS)

    Liu, H.H.; Ahlers, C.F.

    2001-01-01

    The purpose of this Analysis/Model Report (AMR) is to describe the methods used to determine hydrologic properties based on the available field data from the unsaturated zone at Yucca Mountain, Nevada. This is in accordance with the AMR Development Plan (DP) for U0090 Analysis of Hydrologic Properties Data (CRWMS M and O 1999c). Fracture and matrix properties are developed by compiling and analyzing available survey data from the Exploratory Studies Facility (ESF), Cross Drift of Enhanced Characterization of Repository Block (ECRB), and/or boreholes; air injection testing data from surface boreholes and from boreholes in ESF; in-situ measurements of water potential; and data from laboratory testing of core samples

  12. PLA composites: From production to properties.

    Science.gov (United States)

    Murariu, Marius; Dubois, Philippe

    2016-12-15

    Poly(lactic acid) or polylactide (PLA), a biodegradable polyester produced from renewable resources, is used for various applications (biomedical, packaging, textile fibers and technical items). Due to its inherent properties, PLA has a key-position in the market of biopolymers, being one of the most promising candidates for further developments. Unfortunately, PLA suffers from some shortcomings, whereas for the different applications specific end-use properties are required. Therefore, the addition of reinforcing fibers, micro- and/or nanofillers, and selected additives within PLA matrix is considered as a powerful method for obtaining specific end-use characteristics and major improvements of properties. This review highlights recent developments, current results and trends in the field of composites based on PLA. It presents the main advances in PLA properties and reports selected results in relation to the preparation and characterization of the most representative PLA composites. To illustrate the possibility to design the properties of composites, a section is devoted to the production and characterization of innovative PLA-based products filled with thermally-treated calcium sulfate, a by-product from the lactic acid production process. Moreover, are emphasized the last tendencies strongly evidenced in the case of PLA, i.e., the high interest to diversify its uses by moving from biomedical and packaging (biodegradation properties, "disposables") to technical applications ("durables"). Copyright © 2016 Elsevier B.V. All rights reserved.

  13. 41 CFR 101-1.102 - Federal Property Management Regulations.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Federal Property Management Regulations. 101-1.102 Section 101-1.102 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS GENERAL 1-INTRODUCTION 1.1-Regulation...

  14. Extension properties of states on operator algebras

    Science.gov (United States)

    Hamhalter, Jan

    1995-08-01

    We summarize and deepen some recent results concerning the extension problem for states on operator algebras and general quantum logics. In particular, we establish equivalence between the Gleason extension property, the Hahn-Banach extension property, and the universal state extension property of projection logics. Extensions of Jauch-Piron states are investigated.

  15. Interdisciplinary approach to concept of the property

    International Nuclear Information System (INIS)

    Massunov, S.L.

    1996-01-01

    A new system of treatment of safety property is suggested. In general, property of ecological safety is determined as property of technical system (object) not to influence or allow no influence on length of life of living natural objects (people, flora, fauna) on account of health aggravation or increase of mortality

  16. 32 CFR 935.101 - Seizure of property.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Seizure of property. 935.101 Section 935.101 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE TERRITORIAL AND INSULAR REGULATIONS WAKE ISLAND CODE Criminal Actions § 935.101 Seizure of property. Any property seized in connection...

  17. Estimation and Uncertainty Analysis of Flammability Properties of Chemicals using Group-Contribution Property Models

    DEFF Research Database (Denmark)

    Frutiger, Jerome; Abildskov, Jens; Sin, Gürkan

    Process safety studies and assessments rely on accurate property data. Flammability data like the lower and upper flammability limit (LFL and UFL) play an important role in quantifying the risk of fire and explosion. If experimental values are not available for the safety analysis due to cost...... or time constraints, property prediction models like group contribution (GC) models can estimate flammability data. The estimation needs to be accurate, reliable and as less time consuming as possible. However, GC property prediction methods frequently lack rigorous uncertainty analysis. Hence....... In this study, the MG-GC-factors are estimated using a systematic data and model evaluation methodology in the following way: 1) Data. Experimental flammability data is used from AIChE DIPPR 801 Database. 2) Initialization and sequential parameter estimation. An approximation using linear algebra provides...

  18. Lunar surface engineering properties experiment definition

    Science.gov (United States)

    Mitchell, J. K.; Goodman, R. E.; Hurlbut, F. C.; Houston, W. N.; Willis, D. R.; Witherspoon, P. A.; Hovland, H. J.

    1971-01-01

    Research on the mechanics of lunar soils and on developing probes to determine the properties of lunar surface materials is summarized. The areas of investigation include the following: soil simulation, soil property determination using an impact penetrometer, soil stabilization using urethane foam or phenolic resin, effects of rolling boulders down lunar slopes, design of borehole jack and its use in determining failure mechanisms and properties of rocks, and development of a permeability probe for measuring fluid flow through porous lunar surface materials.

  19. Anisotropic nanomaterials preparation, properties, and applications

    CERN Document Server

    Li, Quan

    2015-01-01

    In this book anisotropic one-dimensional and two-dimensional nanoscale building blocks and their assembly into fascinating and qualitatively new functional structures embracing both hard and soft components are explained. Contributions from leading experts regarding important aspects like synthesis, assembly, properties and applications of the above materials are compiled into a reference book. The anisotropy, i.e. the direction-dependent physical properties, of materials is fascinating and elegant and has sparked the quest for anisotropic materials with useful properties. With such a curiosi

  20. Optical properties of solids

    CERN Document Server

    Wooten, Frederick

    1972-01-01

    Optical Properties of Solids covers the important concepts of intrinsic optical properties and photoelectric emission. The book starts by providing an introduction to the fundamental optical spectra of solids. The text then discusses Maxwell's equations and the dielectric function; absorption and dispersion; and the theory of free-electron metals. The quantum mechanical theory of direct and indirect transitions between bands; the applications of dispersion relations; and the derivation of an expression for the dielectric function in the self-consistent field approximation are also encompassed.

  1. Electrical Properties of Sunflower Achenes

    Directory of Open Access Journals (Sweden)

    Novák Ján

    2014-12-01

    Full Text Available This work contains the results of measuring the electrical properties of sunflower achenes. The interest in electrical properties of biological materials resulted in engineering research in this field. The results of measurements are used for determining the moisture content, the surface level of liquid and grainy materials, for controlling the presence of pests in grain storage, for the quantitative determination of mechanical damage, in the application of dielectric heating, and in many other areas. Electrical measurements of these materials are of fundamental importance in relation to the analysis of quantity of absorbed water and dielectric heating characteristics. It is a well-known fact that electrical properties of materials, namely dielectric constant and conductivity, are affected by the moisture content of material. This fact is important for the design of many commercial moisturetesting instruments for agricultural products. The knowledge of dielectric properties of materials is necessary for the application of dielectric heating. The aim of this work was to measure conductivity, dielectric constant and loss tangent on samples of sunflower achenes, the electrical properties of which had not been sufficiently measured. Measurements were performed under variable moisture content and the frequency of electric field ranging from 1 MHz to 16 MHz, using a Q meter with coaxial probe. It was concluded that conductivity, dielectric constant and loss tangent increased with increasing moisture content, and dielectric constant and loss tangent decreased as the frequency of electric field increased.

  2. Intellectual Property.

    Science.gov (United States)

    St. Clair, Gloriana

    1992-01-01

    Discusses issues of copyright and the transfer or use of intellectual property as they relate to librarians. Topics addressed include the purpose of copyright laws, financial losses to publishers from pirating, cultural views of pirating, the fair use doctrine, concerns of authors of scholarly materials, impact of increasing library automation and…

  3. School Property.

    Science.gov (United States)

    Piele, Philip K.; Forsberg, James R.

    The 1973 court cases relating to school property continued a trend toward litigating constitutional issues. For instance, a larger number of cases dealt with the relationship between the location and construction of school buildings and school desegregation plans. This chapter reviews the status and development of case law relating to school…

  4. Contemporary intellectual property law and policy

    CERN Document Server

    MacQueen, Hector; Laurie, Graeme; Brown, Abbe

    2011-01-01

    Contemporary Intellectual Property: Law and Policy offers a unique perspective on intellectual property law, unrivalled amongst IP textbooks available today. Beyond providing an up-to-date account of intellectual property law, the text examines the complex policies that inform and guide modern IP law at the domestic (including Scottish), European and international levels, giving the reader a true insight into the discipline and the shape of things to come. The focus is on contemporary challenges to intellectual property law and policy and the reader is encouraged to engage critically both with the text and the subject matter. Carefully developed to ensure that the complexities of the subject are addressed in a clear and approachable manner, the extensive use of practical examples, exercises and visual aids throughout the text enliven the subject and stimulate the reader.

  5. PROPERTY AND FREE INITIATIVE IN ECONOMY

    Directory of Open Access Journals (Sweden)

    Viorel CORNESCU

    2017-05-01

    Full Text Available The property is a subject that has been and it is studied by specialists from the economics, philosophy, law, history fields etc. It is natural to be a subject of attraction since the property is an essential precondition of the human economic activity, activity that provides the basis of his existence and creates the foundation for the other human activities. As between economics and law – how everybody knows – exists a close interdependence, it is necessary to explain this interdependence from the property perspective, as well as the relationship between property - economic liberty - free initiative. A clarification of ideas about these things and theoretical aspects, from economic and legal point of view, we believe that will have a benefic effect for the economical, legal and political practice etc.

  6. From System Complexity to Emergent Properties

    CERN Document Server

    Aziz-Alaoui, M. A

    2009-01-01

    Emergence and complexity refer to the appearance of higher-level properties and behaviours of a system that obviously comes from the collective dynamics of that system's components. These properties are not directly deductable from the lower-level motion of that system. Emergent properties are properties of the "whole'' that are not possessed by any of the individual parts making up that whole. Such phenomena exist in various domains and can be described, using complexity concepts and thematic knowledges. This book highlights complexity modelling through dynamical or behavioral systems. The pluridisciplinary purposes, developped along the chapters, are enable to design links between a wide-range of fundamental and applicative Sciences. Developing such links - instead of focusing on specific and narrow researches - is characteristic of the Science of Complexity that we try to promote by this contribution.

  7. Calculating hadronic properties in strong QCD

    International Nuclear Information System (INIS)

    Pennington, M.R.

    1996-01-01

    This talk gives a brief review of the progress that has been made in calculating the properties of hadrons in strong QCD. In keeping with this meeting I will concentrate on those properties that can be studied with electromagnetic probes. Though perturbative QCD is highly successful, it only applies in a limited kinematic regime, where hard scattering occur, and the quarks move in the interaction region as if they are free, pointlike objects. However, the bulk of strong interactions are governed by the long distance regime, where the strong interaction is strong. It is this regime of length scales of the order of a Fermi, that determines the spectrum of light hadrons and their properties. The calculation of these properties requires an understanding of non-perturbative QCD, of confinement and chiral symmetry breaking. (author)

  8. Contemporary intellectual property law and policy

    CERN Document Server

    Waelde, Charlotte; Kheria, Smita; Cornwell, Jane

    2016-01-01

    Contemporary Intellectual Property: Law and Policy offers a unique perspective on intellectual property law. It goes beyond an up-to-date account of the law and examines the complex policies that inform and guide modern intellectual property law at the domestic (including Scottish), European and international levels, giving the reader a true insight into the discipline and the shape of things to come. The focus is on contemporary challenges to intellectual property law and policy and the reader is encouraged to engage critically both with the text and the subject matter. Carefully developed to ensure that the complexities of the subject are addressed in a clear and approachable manner, the extensive use of practical examples, exercises and visual aids throughout the text enliven the subject and stimulate the reader.

  9. ACRES - Brownfields Properties

    Data.gov (United States)

    U.S. Environmental Protection Agency — Brownfields are real property, the expansion, redevelopment, or reuse of which may be complicated by the presence or potential presence of a hazardous substance,...

  10. THE LEGAL PROTECTION OF THE PROPERTY RIGHT

    Directory of Open Access Journals (Sweden)

    Anda CRISU-CIOCÎNTĂ

    2015-04-01

    Full Text Available The property right has been acknowledged as one of the personal fundamental rights since a very long time. It enjoys complete legal protection provided on the top of the national legislation hierarchy by constitutional norms as well as by juridical norms specific to the various legal branches where the property is present. The property right is protected consistently and by means of the criminal law, mainly by those juridical norms that incriminate the illicit behaviours which bring prejudice, as well as by the norms that regulate other criminal right institutions such as those ones which are specific to the safety measures with a patrimonial character. After examining the juridical norms that protect the property, the conclusion is that the juridical protection is awarded only if the property right has a licit character.

  11. Processing hexavalent uranium gels and their properties

    International Nuclear Information System (INIS)

    Landspersky, H.; Benadik, A.; Spitzer, Z.

    1980-01-01

    The properties of xerogels of ammonium polyuranate prepared by various drying procedures were studied. The individual drying procedures affect differently both the chemical structure of the material (its composition) and the physicochemical properties of the final product (specific surface area, porosity). In addition, the physicochemical properties of xerogels depend on the properties of the starting material, i.e., on the type of the initial gel. The physicochemical properties of xerogels, in particular their porosity, are in turn relevant for their subsequent high-temperature processing. The porous structure is essential for thermal treatment. The structure of xerogels obtained by distillation procedures is affected both by the conditions of azeotropic distillation and by the medium employed. By judicious selection of these two variables it is possible to prepare materials with different pore size distributions. (author)

  12. APPROPRIATING CREATIVE WORKS PROTECTED BY INTELLECTUAL PROPERTY RIGHTS

    Directory of Open Access Journals (Sweden)

    Cornelia DUMITRU

    2015-07-01

    Full Text Available The ownership, either public or private, is an expression for appropriating goods. Consequently, the appropriation takes the form of private (i.e. private property and common forms (i.e. public property. The common law property defines appropriation as „a deliberate act of acquisition of something, often without the permission of the owner”, but the intellectual property rights do not protect goods. Particularly in this case „the object” of appropriation does not represent a „res nullius” simply because the intellectual property right arises from the act of creation, therefore the appropriation of somebody else’s creation becomes equivalent with stealing (plagiarism. Consequently, if we are to admit that the authors have a right of ownership over them, then ownership in intellectual property law has (it must have other manifestations than those known and accepted in the common law of property.

  13. Vector fields satisfying the barycenter property

    Directory of Open Access Journals (Sweden)

    Lee Manseob

    2018-04-01

    Full Text Available We show that if a vector field X has the C1 robustly barycenter property then it does not have singularities and it is Axiom A without cycles. Moreover, if a generic C1-vector field has the barycenter property then it does not have singularities and it is Axiom A without cycles. Moreover, we apply the results to the divergence free vector fields. It is an extension of the results of the barycenter property for generic diffeomorphisms and volume preserving diffeomorphisms [1].

  14. Owners of public property in Romania

    Directory of Open Access Journals (Sweden)

    Cătălin-Silviu SĂRARU

    2015-06-01

    Full Text Available This article analyzes the owners of public property: the state and the territorial administrative units. The article analyzes various theories about the quality in which the State exercising the right of public property (independently of the a legal person, based on the national sovereignty or as a public law legal person. Similar is analyzed the quality in which the administrative-territorial unit exercises the right of public property. In this article are analyzed also the meanings of the term "administrative territorial unit".

  15. Thermo-Physical Properties of Selected Inconel

    Directory of Open Access Journals (Sweden)

    Krajewski P.K.

    2014-10-01

    Full Text Available The paper brings results of examinations of main thermo-physical properties of selected Inconel alloys, i.e. their heat diffusivity, thermal conductivity and heat capacity, measured in wide temperature range of 20 – 900 oC. Themathematical relationships of the above properties vs. temperature were obtained for the IN 100 and IN 713C alloys. These data can be used when modelling the IN alloys solidification processes aimed at obtaining required structure and properties as well as when designing optimal work temperature parameters.

  16. Model-Checking of Linear-Time Properties in Multi-Valued Systems

    OpenAIRE

    Li, Yongming; Droste, Manfred; Lei, Lihui

    2012-01-01

    In this paper, we study model-checking of linear-time properties in multi-valued systems. Safety property, invariant property, liveness property, persistence and dual-persistence properties in multi-valued logic systems are introduced. Some algorithms related to the above multi-valued linear-time properties are discussed. The verification of multi-valued regular safety properties and multi-valued $\\omega$-regular properties using lattice-valued automata are thoroughly studied. Since the law o...

  17. Tuning Properties in Silver Clusters

    KAUST Repository

    Joshi, Chakra Prasad

    2015-07-09

    The properties of Ag nanoclusters are not as well understood as those of their more precious Au cousins. However, a recent surge in the exploration of strategies to tune the physicochemical characteristics of Ag clusters addresses this imbalance, leading to new insights into their optical, luminescence, crystal habit, metal-core, ligand-shell and environmental properties. In this Perspective, we provide an overview of the latest strategies along with a brief introduction of the theoretical framework necessary to understand the properties of silver nanoclusters and the basis for their tuning. The advances in cluster research and the future prospects presented in this Perspective will eventually guide the next large systematic study of nanoclusters, resulting in a single collection of data similar to the periodic table of elements.

  18. Electrophysical properties of calcium vanadates

    International Nuclear Information System (INIS)

    Krasnenko, T.I.; Fotiev, A.A.

    1983-01-01

    Electrophysical properties of calcium vanadates are studied for the case of alteration of external parameters of the medium (PO 2 , T). It is lshown that structural transformations bring about changes in the nature of electrophysical properties of Ca 2 V 2 O 7 , Ca 3 (VO 4 ) 2 , this being the reason for charge redistribution in anion groupings. It is obvious, that the general conductivity of calcium methavanadate is mainly caused by ion transport. Ca(VO 3 ) 2 possesses amphoteric character of semiconducting properties: the type of conductivity changes from ''p'' to ''n'' with temperature increase. Polytherms of conductivity and sums of ion numbers of Ca 2 V 2 O 7 transition are given. It is established that calcium pyrovanadate has a mixed electron-ion conductivity

  19. Tuning Properties in Silver Clusters

    KAUST Repository

    Joshi, Chakra Prasad; Bootharaju, Megalamane Siddaramappa; Bakr, Osman

    2015-01-01

    The properties of Ag nanoclusters are not as well understood as those of their more precious Au cousins. However, a recent surge in the exploration of strategies to tune the physicochemical characteristics of Ag clusters addresses this imbalance, leading to new insights into their optical, luminescence, crystal habit, metal-core, ligand-shell and environmental properties. In this Perspective, we provide an overview of the latest strategies along with a brief introduction of the theoretical framework necessary to understand the properties of silver nanoclusters and the basis for their tuning. The advances in cluster research and the future prospects presented in this Perspective will eventually guide the next large systematic study of nanoclusters, resulting in a single collection of data similar to the periodic table of elements.

  20. Antifouling properties of hydrogels

    International Nuclear Information System (INIS)

    Murosaki, Takayuki; Gong, Jian Ping; Ahmed, Nafees

    2011-01-01

    Marine sessile organisms easily adhere to submerged solids such as rocks, metals and plastics, but not to seaweeds and fishes, which are covered with soft and wet 'hydrogel'. Inspired by this fact, we have studied long-term antifouling properties of hydrogels against marine sessile organisms. Hydrogels, especially those containing hydroxy group and sulfonic group, show excellent antifouling activity against barnacles both in laboratory assays and in the marine environment. The extreme low settlement on hydrogels in vitro and in vivo is mainly caused by antifouling properties against the barnacle cypris. (topical review)

  1. Properties of gluon jets

    International Nuclear Information System (INIS)

    Sugano, K.

    1988-01-01

    The properties of gluon jets are reviewed from an experimental point of view. The measured characteristics are compared to theoretical expectations. Although neither data nor models for the gluon jets are in the mature stage, there are remarkable agreements and also intriguing disagreements between experiment and theory. Since much interesting data have begun to emerge from various experiments and the properties of gluon jets are deeply rooted in the basic structure of non-Abelian gauge theory, the study of gluon jets casts further light on understanding of QCD. The future prospects are discussed

  2. Review of particle properties

    International Nuclear Information System (INIS)

    Hikasa, K.; Hagiwara, K.; Kawabata, S.; Barnett, R.M.; Groom, D.E.; Trippe, T.G.; Wohl, C.G.; Yost, G.P.; Armstrong, B. Technical Associate; Wagman, G.S. Technical Associate; Stone, J.; Porter, F.C.; Morrison, R.J.; Cutkosky, R.E.; Montanet, L.; Gieselmann, K. Technical Associate; Aguilar-Benitez, M.; Caso, C.; Crawford, R.L.; Roos, M.; Toernqvist, N.A.; Hayes, K.G.; Hoehler, G.; Manley, D.M.

    1992-01-01

    In this Review, we list, evaluate, and average measured properties of gauge bosons, leptons, quarks, mesons, and baryons. We also summarize searches for hypothetical particles such as Higgs bosons, the top quark, heavy neutrinos, monopoles, and supersymmetric particles. All the particle properties and search limits are listed in Summary Tables. We also give numerous tables, figures, formulae, and reviews of topics such as the Standard Model, particle detectors, probability, and statistics. A booklet is available containing the Summary Tables and abbreviated versions of some other sections of this full Review

  3. Individual Property Risk Management

    Directory of Open Access Journals (Sweden)

    Michael S. Finke

    2010-01-01

    Full Text Available This paper reviews household property risk management and estimates normatively optimal choice under theoretical assumptions. Although risk retention limits are common in the financial planning industry, estimates of optimal risk retention that include both financial and human wealth far exceed limits commonly recommended. Households appear to frame property losses differently from other wealth losses leading to wealth-reducing, excess risk transfer. Possible theoretical explanations for excess sensitivity to loss are reviewed. Differences between observed and optimal risk management imply a large potential gain from improved choice.

  4. Neutrino properties from cosmology

    DEFF Research Database (Denmark)

    Hannestad, S.

    2013-01-01

    In recent years precision cosmology has become an increasingly powerful probe of particle physics. Perhaps the prime example of this is the very stringent cosmological upper bound on the neutrino mass. However, other aspects of neutrino physics, such as their decoupling history and possible non......-standard interactions, can also be probed using observations of cosmic structure. Here, I review the current status of cosmological bounds on neutrino properties and discuss the potential of future observations, for example by the recently approved EUCLID mission, to precisely measure neutrino properties....

  5. Antifouling properties of hydrogels

    Directory of Open Access Journals (Sweden)

    Takayuki Murosaki, Nafees Ahmed and Jian Ping Gong

    2011-01-01

    Full Text Available Marine sessile organisms easily adhere to submerged solids such as rocks, metals and plastics, but not to seaweeds and fishes, which are covered with soft and wet 'hydrogel'. Inspired by this fact, we have studied long-term antifouling properties of hydrogels against marine sessile organisms. Hydrogels, especially those containing hydroxy group and sulfonic group, show excellent antifouling activity against barnacles both in laboratory assays and in the marine environment. The extreme low settlement on hydrogels in vitro and in vivo is mainly caused by antifouling properties against the barnacle cypris.

  6. A philosophical approach to intellectual property rights

    DEFF Research Database (Denmark)

    Petersen, Lars Axel

    2000-01-01

    This paper investigates the legitimacy of intellectual property by focusing on three topical issues, viz., the question of indigenous cultural rights, of computer software intellectual rights, and of intellectual property rights to essential drugs. A scheme of different arguments for the legitimacy...... of private property rights is applied to these issues, and each of the arguments assessed....

  7. Surfactant properties of human meibomian lipids.

    Science.gov (United States)

    Mudgil, Poonam; Millar, Thomas J

    2011-03-25

    Human meibomian lipids are the major part of the lipid layer of the tear film. Their surfactant properties enable their spread across the aqueous layer and help maintain a stable tear film. The purpose of this study was to investigate surfactant properties of human meibomian lipids in vitro and to determine effects of different physical conditions such as temperature and increased osmolarity, such as occur in dry eye, on these properties. Human meibomian lipids were spread on an artificial tear solution in a Langmuir trough. The lipid films were compressed and expanded to record the surface pressure-area (Π-A) isocycles. The isocycles were recorded under different physical conditions such as high pressure, increasing concentration and size of divalent cations, increasing osmolarity, and varying temperature. Π-A isocycles of meibomian lipids showed that they form liquid films that are compressible and multilayered. The isocycles were unaffected by increasing concentration or size of divalent cations and increasing osmolarity in the subphase. Temperature had a marked effect on the lipids. Increase in temperature caused lipid films to become fluid, an expected feature, but decrease in temperature unexpectedly caused expansion of lipids and an increase in pressure suggesting enhanced surfactant properties. Human meibomian lipids form highly compressible, non-collapsible, multilayered liquid films. These lipids have surfactants that allow them to spread across an aqueous subphase. Their surfactant properties are unaffected by increasing divalent cations or hyperosmolarity but are sensitive to temperature. Cooling of meibomian lipids enhances their surfactant properties.

  8. Structure-property effects on mechanical, friction and wear properties of electron modified PTFE filled EPDM composite

    Directory of Open Access Journals (Sweden)

    2009-01-01

    Full Text Available Tribological properties of Ethylene-Propylene-Diene-rubber (EPDM containing electron modified Polytetrafluoroethylene (PTFE have been investiagted with the help of pin on disk tribometer without lubrication for a testing time of 2 hrs in atmospheric conditions at a sliding speed and applied normal load of 0.05 m•s–1 and FN = 1 N, respectively. Radiation-induced chemical changes in electron modified PTFE powders were analyzed using Electron Spin Resonance (ESR and Fourier Transform Infrared (FTIR specroscopy to characterize the effects of compatibility and chemical coupling of modified PTFE powders with EPDM on mechanical, friction and wear properties. The composites showed different friction and wear behaviour due to unique morphology, dispersion behaviour and radiation functionalization of PTFE powders. In general, EPDM reinforced with electron modified PTFE powder demonstrated improvement both in mechanical and tribological properties. However, the enhanced compatibility of PTFE powder resulting from the specific chemical coupling of PTFE powder with EPDM has been found crucial for mechanical, friction and wear properties.

  9. Properties of textile grade ceramic fibers

    International Nuclear Information System (INIS)

    Pudnos, E.

    1992-01-01

    The availability of textile grade ceramic fibers has sparked great interest for applications in composite reinforcement and high temperature insulation. This paper summarizes the properties of various small diameter textile grade ceramic fibers currently available. Room temperature mechanical and electrical properties of the fibers are discussed for three cases: ambient conditions, after heat aging in argon, and after heat aging in wet air. Dow Corning (R) HPZ Ceramic Fiber, a silicon nitride type fiber, is shown to have improved retention of mechanical and electrical properties above 1200 C

  10. A System for Recommending Rental Properties

    Directory of Open Access Journals (Sweden)

    Bernard Shibwabo Kasamani

    2017-07-01

    Full Text Available This paper presents an implementation of recommender technology to online search of rental properties. In particular, the paper uses the preference-based search approach combined with a technique called example-critiquing. Rather than perform a query against the database, this approach prompts the user to express some preferences on rental properties, uses them to construct a preference model for the user, and finally generates a list of properties that best match that preferences. The system is developed as Web application using the Ruby on Rails framework

  11. Lectures on geometrical properties of nuclei

    International Nuclear Information System (INIS)

    Myers, W.D.

    1975-11-01

    Material concerning the geometrical properties of nuclei is drawn from a number of different sources. The leptodermous nature of nuclear density distributions and potential wells is used to draw together the various geometrical properties of these systems and to provide a unified means for their description. Extensive use is made of expansions of radial properties in terms of the surface diffuseness. A strong case is made for the use of convolution as a geometrical ansatz for generating diffuse surface distributions because of the number of simplifications that arise which are of practical importance. 7 figures

  12. Chalk: composition, diagenesis and physical properties

    DEFF Research Database (Denmark)

    Fabricius, Ida Lykke

    2007-01-01

    Chalk is a sedimentary rock of unusually high homogeneity on the scale where physical properties are measured, but the properties fall in wide ranges. Chalk may thus be seen as the ideal starting point for a physical understanding of rocks in general. Properties as porosity, permeability, capillary...... involving clay, silica, and calcite are interlinked, but progress differently in different localities. This partly depends on primary sediment composition, including organic content, which may induce the formation of concretions by microbial action. The diagenetic processes also depend on water depth, rate...

  13. Equationally Noetherian property of Ershov algebras

    OpenAIRE

    Dvorzhetskiy, Yuriy

    2014-01-01

    This article is about equationally Noetherian and weak equationally Noetherian property of Ershov algebras. Here we show two canonical forms of the system of equations over Ershov algebras and two criteria of equationally Noetherian and weak equationally Noetherian properties.

  14. Best Practices for Real Property Management

    Science.gov (United States)

    2016-04-21

    rehabilitations ; and other structures and facilities. Real property does not include personal property (weapons systems and other military equipment Repair To...sanitary landfills , sewage treatment, heat distribution lines, heat production plants Operations & Training Aviation runways and ramps, piers and

  15. Alloys and composites of polybenzoxazines properties and applications

    CERN Document Server

    Rimdusit, Sarawut; Tiptipakorn, Sunan

    2013-01-01

    This book provides an introduction to the unique and fascinating properties of alloys and composites from novel commercialized thermosetting resins based on polybenzoxazines. Their outstanding properties such as processability, thermal, mechanical, electrical properties as well as ballistic impact properties of polybenzoxazine alloys and composites make them attractive for various applications in electronic packaging encapsulation, light weight ballistic armour composites and bipolar plate in fuel cells.

  16. Structural, dielectric and electrical properties of ...

    Indian Academy of Sciences (India)

    Administrator

    Detailed studies of dielectric properties of the compound as a function of temperature at ... Microscope (Jeol, JSM-840), operated at 20 kV. The sin- tered pellet was .... grain boundaries, and provides the true picture of the electrical properties of ...

  17. Soil properties from seismic intrinsic dispersion

    NARCIS (Netherlands)

    Zhubayev, A.S.

    2014-01-01

    Theoretical and experimental studies in the past have shown the sensitivity of seismic waves to soil/rock properties, such as composition, porosity, pore fluid, and permeability. However, quantitative characterization of these properties has remained challenging. In case of unconsolidated soils, the

  18. Finite Element Method for Analysis of Material Properties

    DEFF Research Database (Denmark)

    Rauhe, Jens Christian

    and the finite element method. The material microstructure of the heterogeneous material is non-destructively determined using X-ray microtomography. A software program has been generated which uses the X-ray tomographic data as an input for the mesh generation of the material microstructure. To obtain a proper...... which are used for the determination of the effective properties of the heterogeneous material. Generally, the properties determined using the finite element method coupled with X-ray microtomography are in good agreement with both experimentally determined properties and properties determined using......The use of cellular and composite materials have in recent years become more and more common in all kinds of structural components and accurate knowledge of the effective properties is therefore essential. In this wok the effective properties are determined using the real material microstructure...

  19. Electronic properties of semiconductor heterostructures

    International Nuclear Information System (INIS)

    Einevoll, G.T.

    1991-02-01

    Ten papers on the electronic properties of semiconductors and semiconductor heterostructures constitute the backbone of this thesis. Four papers address the form and validity of the single-band effective mass approximation for semiconductor heterostructures. In four other papers properties of acceptor states in bulk semiconductors and semiconductor heterostructures are studied using the novel effective bond-orbital model. The last two papers deal with localized excitions. 122 refs

  20. Molecular structure based property modeling: Development/ improvement of property models through a systematic property-data-model analysis

    DEFF Research Database (Denmark)

    Hukkerikar, Amol Shivajirao; Sarup, Bent; Sin, Gürkan

    2013-01-01

    models. To make the property-data-model analysis fast and efficient, an approach based on the “molecular structure similarity criteria” to identify molecules (mono-functional, bi-functional, etc.) containing specified set of structural parameters (that is, groups) is employed. The method has been applied...

  1. Estimation of environment-related properties of chemicals for design of sustainable processes: development of group-contribution+ (GC+) property models and uncertainty analysis.

    Science.gov (United States)

    Hukkerikar, Amol Shivajirao; Kalakul, Sawitree; Sarup, Bent; Young, Douglas M; Sin, Gürkan; Gani, Rafiqul

    2012-11-26

    The aim of this work is to develop group-contribution(+) (GC(+)) method (combined group-contribution (GC) method and atom connectivity index (CI) method) based property models to provide reliable estimations of environment-related properties of organic chemicals together with uncertainties of estimated property values. For this purpose, a systematic methodology for property modeling and uncertainty analysis is used. The methodology includes a parameter estimation step to determine parameters of property models and an uncertainty analysis step to establish statistical information about the quality of parameter estimation, such as the parameter covariance, the standard errors in predicted properties, and the confidence intervals. For parameter estimation, large data sets of experimentally measured property values of a wide range of chemicals (hydrocarbons, oxygenated chemicals, nitrogenated chemicals, poly functional chemicals, etc.) taken from the database of the US Environmental Protection Agency (EPA) and from the database of USEtox is used. For property modeling and uncertainty analysis, the Marrero and Gani GC method and atom connectivity index method have been considered. In total, 22 environment-related properties, which include the fathead minnow 96-h LC(50), Daphnia magna 48-h LC(50), oral rat LD(50), aqueous solubility, bioconcentration factor, permissible exposure limit (OSHA-TWA), photochemical oxidation potential, global warming potential, ozone depletion potential, acidification potential, emission to urban air (carcinogenic and noncarcinogenic), emission to continental rural air (carcinogenic and noncarcinogenic), emission to continental fresh water (carcinogenic and noncarcinogenic), emission to continental seawater (carcinogenic and noncarcinogenic), emission to continental natural soil (carcinogenic and noncarcinogenic), and emission to continental agricultural soil (carcinogenic and noncarcinogenic) have been modeled and analyzed. The application

  2. The Analysis of Differences in Residential Property Price Indices

    Directory of Open Access Journals (Sweden)

    Kokot Sebastian

    2014-10-01

    Full Text Available Residential property price indices can serve as a useful tool in the practice of real property market analysts, investment advisers, property developers, certified property appraisers, estate agents and managers. They can also be applied in property price valorization in specific legal positions. The Polish Act on Real Estate Management puts an obligation on the President of the Central Statistical Office to announce real property price indices, but the CSO fails to fulfill this obligation. The author’s rationale for this article is to contribute to works on rules of how to build property price indices. Presented within are the results of research on determining the price indices of such types of residential property as: a part of a building constituting a separate property and strata titles in housing cooperatives. The flats were divided into categories by floor area and by their location in 16 voivodeship capitals. The major purpose of the study is to prove that the prices of flats of different floor area change at different rates. Consequently, it seems worth considering whether a more detailed segmentation of the real estate market would be worthwhile for the sake of more accurate real property price indicators.

  3. Sorption properties of carbon nanostructures

    International Nuclear Information System (INIS)

    Eletskii, Aleksandr V

    2004-01-01

    The current status of research in sorption properties of carbon nanotubes (CNTs) is reviewed. The structural peculiarities of CNTs, determining their sorption characteristics, are considered. The mechanisms of sorption of gaseous and condensed substances by such structures are analyzed. Special attention is paid to the problem of using CNTs for storing hydrogen and other gaseous substances. Methods for filling CNTs with liquid materials, based on capillary phenomena and wetting the graphite surface of the CNT with liquids of various nature, are considered. Properties of 'peapods' formed as a result of filling single-walled CNTs with fullerene molecules are reviewed. Also considered are perspectives on the applied usage of the sorption properties of CNTs in electrochemical and fuel cells, and material storage devices, as well as for producing superminiature metallic conductors. (reviews of topical problems)

  4. 22 CFR 226.36 - Intangible property.

    Science.gov (United States)

    2010-04-01

    ... Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Property Standards § 226.36 Intangible property. (a) The... Organizations and Small Business Firms Under Government Grants, Contracts and Cooperative Agreements.” (c) The...

  5. 28 CFR 70.36 - Intangible property.

    Science.gov (United States)

    2010-07-01

    ...-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 70.36 Intangible property. (a) The... purchased, under an award. The Department reserves a royalty-free, nonexclusive and irrevocable right to..., peer reviews, or communications with colleagues. This “recorded” material excludes physical objects (e...

  6. Magnetic materials fundamentals, products, properties, applications

    CERN Document Server

    Hilzinger, Rainer

    2013-01-01

    At a practical level, this compendium reviews the basics of soft and hard magnetic materials, discusses the advantages of the different processing routes for the exploitation of the magnetic properties and hence assists in proper, fail-safe and economic application of magnetic materials. Essential guidelines and formulas for the calculation of the magnetic and electrical properties, temperature and long-term stability of permanent magnets, of inductive components and magnetic shielding are compiled. Selected fields of application and case studies illustrate the large diversity of technical applications. Application engineers will appreciate the comprehensive compilation of the properties and detailed characteristic curves of modern soft and hard magnetic materials. Materials scientists will enjoy the presentation of the different processing routes and their impact on the magnetic properties and students will profit from the survey from the basics of magnetism down to the applications in inductive components, ...

  7. The thermophysical properties of metallic liquids

    CERN Document Server

    Iida, Takamichi

    2015-01-01

    The main purpose of materials science and engineering is to make the best use of all the elements in the periodic table. This leads to the effective use and conservation of natural resources. For this purpose, in any liquid metallic processing operation, accurate data for the thermophysical properties of all metallic liquids (i.e. liquid metals, semimetals, and semiconductors) is needed. However, in addition, a clear understanding of the essence of their thermophysical properties, based on these data, is indispensable. The second volume continues from the first volume to provide explanations for the thermophysical properties of metallic liquids. The two volumes identify new dimensionless parameters, extracted from the velocity of sound. In spite of being simple parameters, they provide useful information on the nature and behaviour of metallic liquids. This volume covers several basic concepts needed to understand the thermophysical properties of metallic liquids and for developing reliable models to accurate...

  8. An Overview of Human Rights and Intellectual Property Protection

    Directory of Open Access Journals (Sweden)

    Maysa Said Bydoon

    2016-12-01

    Full Text Available The purpose of this article is to discuss the legal framework of human rights and intellectual property in terms of state obligations to afford a protection for both human rights and intellectual property. The relationship between intellectual property and human rights, under bilateral, regional and multilateral treaties, is a matter of concern. In focusing on the relationship between intellectual property and human rights, this article argues that there are many challenges on the wide use of Intellectual property rights that given possible conflict between intellectual property and human rights.

  9. Prediction of cold flow properties of Biodiesel

    Directory of Open Access Journals (Sweden)

    Parag Saxena

    2016-08-01

    Full Text Available Biodiesel being environmentally friendly is fast gaining acceptance in the market as an alternate diesel fuel. But compared to petroleum diesel it has certain limitations and thus it requires further development on economic viability and improvement in its properties to use it as a commercial fuel. The cold flow properties play a major role in the usage of biodiesel commercially as it freezes at cold climatic conditions. In the present study, cold flow properties of various types of biodiesel were estimated by using correlations available in literature. The correlations were evaluated based on the deviation between the predicted value and experimental values of cold flow properties.

  10. CONSEQUENCES OF SYMMETRY GROUPS FOR ELECTROMAGNETIC PROPERTIES

    Energy Technology Data Exchange (ETDEWEB)

    MacFarlane, A. J.; Sudarshan, E. C.G.

    1963-06-15

    The electromagnetic properties of SU/sub 3/ supermultiplets are obtained formally by a unitary transformation of a theory whose SU/sub 3/ invariant strong interactions are perturbed by merely charge-independent interactions. Several new results are presented, but the emphasis is on the simplicity and power of the method. Electromagnetic properties of the first and second kinds are distinguished, the former being independent of the precise manner in which the particular electromagnetic property depends on the electric charge current density. It is shown that all except two relations between the magnetic moments of the baryon octet hold equally well for other electromagnetic properties like self energies and Compton scattering amplitudes. (auth)

  11. Research of footwear lining materials thermoconductive properties

    Science.gov (United States)

    Maksudova, U.; Ilkhamova, M.; Mirzayev, N.; Pazilova, D.

    2017-11-01

    Protective properties of footwear are influenced by a number of factors and the most important of them are: design features of the top and the bottom of the footwear, it’s shape, physical and mechanical properties of the components of which they are made. In course of work there were researched thermoconductive properties of different lining membrane materials used for production of high temperature protective footwear. Research results allow to select the appropriate materials by reference to thermoconductive properties during design of protective footwear for extreme conditions to prolong the wearer’s time of comfortable stay in conditions of exposure of elevated temperatures to a stack.

  12. Estimation of thermophysical properties in the system Li-Pb

    International Nuclear Information System (INIS)

    Jauch, U.; Schulz, B.

    1986-01-01

    Based on the phase diagram and the knowledge of thermophysical properties data of alloys and intermetallic compounds in the Li-Pb system, quantitative relationships between several properties and between the properties in solid and liquid state are used: to interpret the results on thermophysical properties in the quasibinary system LiPb-Pb and to estimate unknown properties in the concentration range 100 > Li (at.%) > 50. (orig.)

  13. Are both dimensions of property rights “efficient”?

    Directory of Open Access Journals (Sweden)

    Pál Czeglédi

    2015-06-01

    Full Text Available The “efficient institutions view” on property rights claims that property rights emerged and are enforced when their enforcement maximizes net wealth. In a cross-country pattern this is usually understood as the prediction that economic development creates the incentives to provide higher quality property rights, but this claim is highly debated. This paper tries to take various property rights scholars’ arguments seriously and see property rights quality as a two dimensional concept, the two dimensions being the definition and the assignment of property rights. The paper derives a measure for these two dimensions of property rights and shows that it is the assignment dimension which is determined by development, while the definition dimensions is rather determined by cultural factors, especially those deeper factors that seem to reflect a long-run effect of Western European culture. According to the paper, the main reasons behind this may be the difference in the expropriability of income generated by an improvement of each dimension, and the way such improvements may or may not affect countries’ catching up process.

  14. Thermophysical properties of materials for water cooled reactors

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The IAEA Co-ordinated Research Programme (CRP) to establish a thermophysical properties data base for light and heavy water reactor materials was organized within the framework of the IAEA`s International Working Group on Advanced Technologies for Water Cooled Reactors. The work within the CRP started in 1990. The objective of the CRP was to collect and systemaize a thermophysical properties data base for light and heavy water reactor materials under normal operating, transient and accident conditions. The important thermophysical properties include thermal conductivity, thermal diffusivity, specific heat capacity, enthalpy, thermal expansion and others. These properties as well as the oxidation of zirconium-based alloys, the thermophysical characteristics of high temperature concrete-core melt interaction and the mechanical properties of construction materials are presented in this report. It is hoped that this report will serve as a useful source of thermophysical properties data for water cooled reactor analyses. The properties data are maintained on the THERSYST system at the University of Stuttgart, Germany and are internationally available. Refs, figs, tabs.

  15. Thermophysical properties of materials for water cooled reactors

    International Nuclear Information System (INIS)

    1997-06-01

    The IAEA Co-ordinated Research Programme (CRP) to establish a thermophysical properties data base for light and heavy water reactor materials was organized within the framework of the IAEA's International Working Group on Advanced Technologies for Water Cooled Reactors. The work within the CRP started in 1990. The objective of the CRP was to collect and systemaize a thermophysical properties data base for light and heavy water reactor materials under normal operating, transient and accident conditions. The important thermophysical properties include thermal conductivity, thermal diffusivity, specific heat capacity, enthalpy, thermal expansion and others. These properties as well as the oxidation of zirconium-based alloys, the thermophysical characteristics of high temperature concrete-core melt interaction and the mechanical properties of construction materials are presented in this report. It is hoped that this report will serve as a useful source of thermophysical properties data for water cooled reactor analyses. The properties data are maintained on the THERSYST system at the University of Stuttgart, Germany and are internationally available. Refs, figs, tabs

  16. Properties of Boolean orthoposets

    Science.gov (United States)

    Tkadlec, Josef

    1993-10-01

    A Boolean orthoposet is the orthoposet P fulfilling the following condition: If a, b ∈ P and a ∧ b = 0, then a ⊥ b. This condition seems to be a sound generalization of distributivity in orthoposets. Also, the class of (orthomodular) Boolean orthoposets may play an interesting role in quantum logic theory. This class is wide enough and, on the other hand, enjoys some properties of Boolean algebras. In this paper we summarize results on Boolean orthoposets involving distributivity, set representation, properties of the state space, existence of Jauch-Piron states, and results concerning orthocompleteness and completion.

  17. Basic properties of semiconductors

    CERN Document Server

    Landsberg, PT

    2013-01-01

    Since Volume 1 was published in 1982, the centres of interest in the basic physics of semiconductors have shifted. Volume 1 was called Band Theory and Transport Properties in the first edition, but the subject has broadened to such an extent that Basic Properties is now a more suitable title. Seven chapters have been rewritten by the original authors. However, twelve chapters are essentially new, with the bulk of this work being devoted to important current topics which give this volume an almost encyclopaedic form. The first three chapters discuss various aspects of modern band theory and the

  18. Polyrational property: rules for the many uses of land

    Directory of Open Access Journals (Sweden)

    Benjamin Davy

    2014-08-01

    Full Text Available Land uses are what land users do. When spatial planners and other policymakers promote or preclude certain land uses, they interfere with the rights of the users of land, most notably with property. The technical term for what connects land uses, planning, and property is land policy. My paper has a simple message: Good land policy provides a diversity of land uses with plural property relations. No single kind of property rules fits the purposes of all types of land uses. A detached single family house is not like a community garden, nor a highway like a retail chain. Each land use needs its own property “fingerprint.” In everyday practice, private and common property relations often accommodate a wide variety of demands made by the owners and users of land. Many theories of property and land policy, however, fail to recognize plural property relations. The simple message of my paper seeks to reconcile practice and theory. A polyrational theory of planning and property identifies eight types of land uses, each type needing its own kind of property rules. The eight types of land uses are: insular, opportunistic, kinship, collaborative, corporate, structural, container, and environmental uses of land. Polyrational land policy makes sure that desirable land uses are enveloped by appropriate property relations.

  19. Multiple Property Cross Direction Control of Paper Machines

    Directory of Open Access Journals (Sweden)

    Markku Ohenoja

    2011-07-01

    Full Text Available Cross direction (CD control in sheet-forming process forms a challenging problem with high dimensions. Accounting the interactions between different properties and actuators, the dimensionality increases further and also computational issues arise. We present a multiple property controller feasible to be used especially with imaging measurements that provide high sampling frequency and therefore enable short control interval. The simulation results state the benefits of multiple property CD control over single property control and single property control using full feedforward compensation. The controller presented may also be tuned in automated manner and the results demonstrate the effect of tuning on input saturation.

  20. Comparative analysis of direct and indirect property investment ...

    African Journals Online (AJOL)

    Comparative analysis of direct and indirect property investment returns in Abuja. ... in property shares is more risky than commercial property due to the risk ... of the stock market, it was discovered that there is a strong positive relationship ...

  1. Approximation properties of fine hyperbolic graphs

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... In this paper, we propose a definition of approximation property which is called the metric invariant translation approximation property for a countable discrete metric space. Moreover, we use ... Department of Applied Mathematics, Shanghai Finance University, Shanghai 201209, People's Republic of China ...

  2. Unravelling property relations around forest carbon

    NARCIS (Netherlands)

    Mahanty, S.; Dressler, W.H.; Milne, S.; Filer, C.

    2013-01-01

    Market-based interventions to Reduce Emissions from Deforestation and Forest Degradation (REDD+) enable the carbon stored in land and forests to be traded as a new and intangible form of property. Using examples from Cambodia, the Philippines and Papua New Guinea, we examine the property

  3. 36 CFR 1210.32 - Real property.

    Science.gov (United States)

    2010-07-01

    ... Section 1210.32 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION GENERAL... Government after it compensates the Federal Government for that percentage of the current fair market value... that percentage of the current fair market value of the property attributable to the Federal...

  4. 7 CFR 767.51 - Property abandonment.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF..., manage, and operate the abandoned security property, including marketing perishable security property on behalf of the borrower when such action is in the Agency's financial interest. If the security is in...

  5. SOME PHYSICOCHEMICAL PROPERTIES AND APPLICATION OF ...

    African Journals Online (AJOL)

    The α-cellulose was also employed as disintegrant in some tablet formulations. Some of the physicochemical and flow properties evaluated were, moisture content, bulk density, packed density, Carrs compressibility, angle of repose and Hausner quotient. The tablet properties studied were, disintegration time, hardness, ...

  6. The value of foreclosed property

    OpenAIRE

    Anthony Pennington-Cross

    2004-01-01

    This paper examines the expected price appreciation of distressed property and compares it to the prevailing metropolitan area appreciation rate. The results show that the simple fact that the property is foreclosed indicates that it will be sold at a substantial discount (appreciate less than expected). The magnitude of the discount is sensitive to loan characteristics, legal restrictions, housing market conditions, and the bargaining position of the selling institution.

  7. Molecular Properties through Polarizable Embedding

    DEFF Research Database (Denmark)

    Olsen, Jógvan Magnus Haugaard; Kongsted, Jacob

    2011-01-01

    We review the theory related to the calculation of electric and magnetic molecular properties through polarizable embedding. In particular, we derive the expressions for the response functions up to the level of cubic response within the density functional theory-based polarizable embedding (PE......-DFT) formalism. In addition, we discuss some illustrative applications related to the calculation of nuclear magnetic resonance parameters, nonlinear optical properties, and electronic excited states in solution....

  8. Measuring Property Management Risk and Loss: Step One Toward Managing Property on a Foundation of Risk, Cost, and Benefit

    International Nuclear Information System (INIS)

    Johnson, Curtis

    1999-01-01

    This is a period of ever-tightening defense budgets and continuing pressure on the public sector to be more commercial-like, Property policies, practices, and regulations are increasingly being challenged and changed. In these times, we must be leaders in understanding and defining the value of our profession from a commercial standpoint so that we can provide the right services to our customers and explain and defend the value of those services. To do so, we must step outside current property management practices, regulations, and oversight. We must learn to think and speak in the language of those who fund us--a financial language of risk, cost, and benefit. Regardless of regulation and oversight, our bosses are demanding that we demonstrate (financially) the benefits of current practice, or else. This article is intended to be the beginning of an effort to understand and define our profession in terms of risk, cost, and benefit so that we can meet these new challenges. The first step in this effort must be defining and measuring risk, cost, and benefit. Our costs, although sometimes difficult to capture, are easy to understand: they are almost exclusively the effort, both within and without the property management organization, involved in managing property. Unfortunately, property risks and benefits are not so simple or so well understood. Generally, risks and benefits are identified and measured through physical inventory results: potential and actual shortages. This paper will explore the weaknesses in the current understanding and use of shortage information as the yardstick for property management risks and performance. It will define a new framework for understanding the purpose and value of property management. And finally, it will set a course for a new method of measuring and valuing physical inventoty shortages. This new method will yield accurate and useful measures of property management risk and benefit. Once risk and benefit are accurately

  9. Size- and shape-dependent surface thermodynamic properties of nanocrystals

    Science.gov (United States)

    Fu, Qingshan; Xue, Yongqiang; Cui, Zixiang

    2018-05-01

    As the fundamental properties, the surface thermodynamic properties of nanocrystals play a key role in the physical and chemical changes. However, it remains ambiguous about the quantitative influence regularities of size and shape on the surface thermodynamic properties of nanocrystals. Thus by introducing interface variables into the Gibbs energy and combining Young-Laplace equation, relations between the surface thermodynamic properties (surface Gibbs energy, surface enthalpy, surface entropy, surface energy and surface heat capacity), respectively, and size of nanocrystals with different shapes were derived. Theoretical estimations of the orders of the surface thermodynamic properties of nanocrystals agree with available experimental values. Calculated results of the surface thermodynamic properties of Au, Bi and Al nanocrystals suggest that when r > 10 nm, the surface thermodynamic properties linearly vary with the reciprocal of particle size, and when r < 10 nm, the effect of particle size on the surface thermodynamic properties becomes greater and deviates from linear variation. For nanocrystals with identical equivalent diameter, the more the shape deviates from sphere, the larger the surface thermodynamic properties (absolute value) are.

  10. Structure, processing, and properties of potatoes

    Science.gov (United States)

    Lloyd, Isabel K.; Kolos, Kimberly R.; Menegaux, Edmond C.; Luo, Huy; McCuen, Richard H.; Regan, Thomas M.

    1992-06-01

    The objective of this experiment and lesson intended for high school students in an engineering or materials science course or college freshmen is to demonstrate the relation between processing, structure, and thermodynamic and physical properties. The specific objectives are to show the effect of structure and structural changes on thermodynamic properties (specific heat) and physical properties (compressive strength); to illustrate the first law of thermodynamics; to compare boiling a potato in water with cooking it in a microwave in terms of the rate of structural change and the energy consumed to 'process' the potato; and to demonstrate compression testing.

  11. Structure, processing, and properties of potatoes

    Science.gov (United States)

    Lloyd, Isabel K.; Kolos, Kimberly R.; Menegaux, Edmond C.; Luo, Huy; Mccuen, Richard H.; Regan, Thomas M.

    1992-01-01

    The objective of this experiment and lesson intended for high school students in an engineering or materials science course or college freshmen is to demonstrate the relation between processing, structure, and thermodynamic and physical properties. The specific objectives are to show the effect of structure and structural changes on thermodynamic properties (specific heat) and physical properties (compressive strength); to illustrate the first law of thermodynamics; to compare boiling a potato in water with cooking it in a microwave in terms of the rate of structural change and the energy consumed to 'process' the potato; and to demonstrate compression testing.

  12. The properties and applications of nanodiamonds.

    Energy Technology Data Exchange (ETDEWEB)

    Mochalin, Vadym [Drexel University; Shenderova, Olga [International Technology Center, Raleigh, North Carolina; Ho, Dean [Northwestern University, Evanston; Gogotsi, Yury G. [Drexel University

    2011-01-01

    Nanodiamonds have excellent mechanical and optical properties, high surface areas and tunable surface structures. They are also non-toxic, which makes them well suited to biomedical applications. Here we review the synthesis, structure, properties, surface chemistry and phase transformations of individual nanodiamonds and clusters of nanodiamonds. In particular we discuss the rational control of the mechanical, chemical, electronic and optical properties of nanodiamonds through surface doping, interior doping and the introduction of functional groups. These little gems have a wide range of potential applications in tribology, drug delivery, bioimaging and tissue engineering, and also as protein mimics and a filler material for nanocomposites.

  13. The Properties and Applications of Nanodiamonds.

    Energy Technology Data Exchange (ETDEWEB)

    Mochalin, V.; Shenderova, O.; Ho, D.; Gogotsi, Y.

    2011-12-18

    Nanodiamonds have excellent mechanical and optical properties, high surface areas and tunable surface structures. They are also non-toxic, which makes them well suited to biomedical applications. Here we review the synthesis, structure, properties, surface chemistry and phase transformations of individual nanodiamonds and clusters of nanodiamonds. In particular we discuss the rational control of the mechanical, chemical, electronic and optical properties of nanodiamonds through surface doping, interior doping and the introduction of functional groups. These little gems have a wide range of potential applications in tribology, drug delivery, bioimaging and tissue engineering, and also as protein mimics and a filler material for nanocomposites.

  14. The properties and applications of nanodiamonds.

    Science.gov (United States)

    Mochalin, Vadym N; Shenderova, Olga; Ho, Dean; Gogotsi, Yury

    2011-12-18

    Nanodiamonds have excellent mechanical and optical properties, high surface areas and tunable surface structures. They are also non-toxic, which makes them well suited to biomedical applications. Here we review the synthesis, structure, properties, surface chemistry and phase transformations of individual nanodiamonds and clusters of nanodiamonds. In particular we discuss the rational control of the mechanical, chemical, electronic and optical properties of nanodiamonds through surface doping, interior doping and the introduction of functional groups. These little gems have a wide range of potential applications in tribology, drug delivery, bioimaging and tissue engineering, and also as protein mimics and a filler material for nanocomposites.

  15. A classification of hidden-variable properties

    International Nuclear Information System (INIS)

    Brandenburger, Adam; Yanofsky, Noson

    2008-01-01

    Hidden variables are extra components added to try to banish counterintuitive features of quantum mechanics. We start with a quantum-mechanical model and describe various properties that can be asked of a hidden-variable model. We present six such properties and a Venn diagram of how they are related. With two existence theorems and three no-go theorems (EPR, Bell and Kochen-Specker), we show which properties of empirically equivalent hidden-variable models are possible and which are not. Formally, our treatment relies only on classical probability models, and physical phenomena are used only to motivate which models to choose

  16. Thermodynamic properties of uranium--mercury system

    International Nuclear Information System (INIS)

    Lee, T.S.

    1979-01-01

    The EMF values in the fused salt cells of the type U(α)/KCl--LiCl--BaCl 2 eutectic, UCl 3 /U--Hg alloy, for the different two-phase alloys in the uranium--mercury system have been measured and the thermodynamic properties of this system have been calculated. These calculated values are in good agreement with values based on mercury vapor pressure measurements made by previous investigators. The inconsistency of the thermodynamic properties with the phase diagram determined by Frost are also confirmed. A tentative phase diagram based on the thermodynamic properties measured in this work was constructed

  17. Short Communications Strength Properties and Groups of Major ...

    African Journals Online (AJOL)

    Short Communications Strength Properties and Groups of Major Commercial Timbers Grown in Kenya. ... The strength groups developed revealed that most species in Kenya are suitable for heavy engineering works and building construction. ... strength properties, commercial timber, physical and mechanical properties

  18. Spectroscopic properties of transition elements and their related magnetic properties

    International Nuclear Information System (INIS)

    Porcher, P.; Malta, O.L.

    1988-01-01

    The optical and magnetic properties of transition elements (nd N and nf N ions) are analysed. The phenomenological parameters introduced in the crystal-ligand field theory, the free ion interactions and crystalline matrix as well as electrostatic repulsion are studied. (M.J.C.) [pt

  19. Remote sensing application for property tax evaluation

    Science.gov (United States)

    Jain, Sadhana

    2008-02-01

    This paper presents a study for linking remotely sensed data with property tax related issues. First, it discusses the key attributes required for property taxation and evaluates the capabilities of remote sensing technology to measure these attributes accurately at parcel level. Next, it presents a detailed case study of six representative wards of different characteristics in Dehradun, India, that illustrates how measurements of several of these attributes supported by field survey can be combined to address the issues related to property taxation. Information derived for various factors quantifies the property taxation contributed by an average dwelling unit of the different income groups. Results show that the property tax calculated in different wards varies between 55% for the high-income group, 32% for the middle-income group, 12% for the low-income group and 1% for squatter units. The study concludes that higher spatial resolution satellite data and integrates social survey helps to assess the socio-economic status of the population for tax contribution purposes.

  20. Biological properties of water-soluble phosphorhydrazone dendrimers

    Directory of Open Access Journals (Sweden)

    Anne-Marie Caminade

    2013-01-01

    Full Text Available Dendrimers are hyperbranched and perfectly defined macromolecules, constituted of branches emanating from a central core in an iterative fashion. Phosphorhydrazone dendrimers constitute a special family of dendrimers, possessing one phosphorus atom at each branching point. The internal structure of these dendrimers is hydrophobic, but hydrophilic terminal groups can induce the solubility of the whole structure in water. Indeed, the properties of these compounds are mainly driven by the type of terminal groups their bear; this is especially true for the biological properties. For instance, positively charged terminal groups are efficient for transfection experiments, as drug carriers, as anti-prion agents, and as inhibitor of the aggregation of Alzheimer's peptides, whereas negatively charged dendrimers have anti-HIV properties and can influence the human immune system, leading to anti-inflammatory properties usable against rheumatoid arthritis. This review will give the most representative examples of the biological properties of water-soluble phosphorhydrazone dendrimers, organized depending on the type of terminal groups they bear.

  1. Designing Optical Properties in DNA-Programmed Nanoparticle Superlattices

    Science.gov (United States)

    Ross, Michael Brendan

    A grand challenge of modern science has been the ability to predict and design the properties of new materials. This approach to the a priori design of materials presents a number of challenges including: predictable properties of the material building blocks, a programmable means for arranging such building blocks into well understood architectures, and robust models that can predict the properties of these new materials. In this dissertation, we present a series of studies that describe how optical properties in DNA-programmed nanoparticle superlattices can be predicted prior to their synthesis. The first chapter provides a history and introduction to the study of metal nanoparticle arrays. Chapter 2 surveys and compares several geometric models and electrodynamics simulations with the measured optical properties of DNA-nanoparticle superlattices. Chapter 3 describes silver nanoparticle superlattices (rather than gold) and identifies their promise as plasmonic metamaterials. In chapter 4, the concept of plasmonic metallurgy is introduced, whereby it is demonstrated that concepts from materials science and metallurgy can be applied to the optical properties of mixed metallic plasmonic materials, unveiling rich and tunable optical properties such as color and asymmetric reflectivity. Chapter 5 presents a comprehensive theoretical exploration of anisotropy (non-spherical) in nanoparticle superlattice architectures. The role of anisotropy is discussed both on the nanoscale, where several desirable metamaterial properties can be tuned from the ultraviolet to near-infrared, and on the mesoscale, where the size and shape of a superlattice is demonstrated to have a pronounced effect on the observed far-field optical properties. Chapter 6 builds upon those theoretical data presented in chapter 5, including the experimental realization of size and shape dependent properties in DNA-programmed superlattices. Specifically, nanoparticle spacing is explored as a parameter that

  2. Predictive-property-ranked variable reduction in partial least squares modelling with final complexity adapted models: comparison of properties for ranking.

    Science.gov (United States)

    Andries, Jan P M; Vander Heyden, Yvan; Buydens, Lutgarde M C

    2013-01-14

    The calibration performance of partial least squares regression for one response (PLS1) can be improved by eliminating uninformative variables. Many variable-reduction methods are based on so-called predictor-variable properties or predictive properties, which are functions of various PLS-model parameters, and which may change during the steps of the variable-reduction process. Recently, a new predictive-property-ranked variable reduction method with final complexity adapted models, denoted as PPRVR-FCAM or simply FCAM, was introduced. It is a backward variable elimination method applied on the predictive-property-ranked variables. The variable number is first reduced, with constant PLS1 model complexity A, until A variables remain, followed by a further decrease in PLS complexity, allowing the final selection of small numbers of variables. In this study for three data sets the utility and effectiveness of six individual and nine combined predictor-variable properties are investigated, when used in the FCAM method. The individual properties include the absolute value of the PLS1 regression coefficient (REG), the significance of the PLS1 regression coefficient (SIG), the norm of the loading weight (NLW) vector, the variable importance in the projection (VIP), the selectivity ratio (SR), and the squared correlation coefficient of a predictor variable with the response y (COR). The selective and predictive performances of the models resulting from the use of these properties are statistically compared using the one-tailed Wilcoxon signed rank test. The results indicate that the models, resulting from variable reduction with the FCAM method, using individual or combined properties, have similar or better predictive abilities than the full spectrum models. After mean-centring of the data, REG and SIG, provide low numbers of informative variables, with a meaning relevant to the response, and lower than the other individual properties, while the predictive abilities are

  3. Pelletizing properties of torrefied wheat straw

    DEFF Research Database (Denmark)

    Stelte, Wolfgang; Nielsen, Niels Peter; Hansen, Hans Ove

    2013-01-01

    of wheat straw have been analyzed. Laboratory equipment has been used to investigate the pelletizing properties of wheat straw torrefied at temperatures between 150 and 300 °C. IR spectroscopy and chemical analyses have shown that high torrefaction temperatures change the chemical properties of the wheat...

  4. 14 CFR 1273.31 - Real property.

    Science.gov (United States)

    2010-01-01

    ... percentage of participation in the cost of the original purchase to the fair market value of the property... GRANTS AND COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes... subgrantee's percentage of participation in the purchase of the real property to the current fair market...

  5. Intellectual Property Policies at Canadian Universities

    OpenAIRE

    Hen, M.

    2010-01-01

    The present study examines the Intellectual Property policies at schools selected from Research Infosource’s Canada’s Top 50 research universities 2009 (http://www.researchinfosource.com/). This work is a continuation and extension of Dr. Bruce P. Clayman’s original idea and piece University intellectual property policies.

  6. Symmetry Properties of Potentiometric Titration Curves.

    Science.gov (United States)

    Macca, Carlo; Bombi, G. Giorgio

    1983-01-01

    Demonstrates how the symmetry properties of titration curves can be efficiently and rigorously treated by means of a simple method, assisted by the use of logarithmic diagrams. Discusses the symmetry properties of several typical titration curves, comparing the graphical approach and an explicit mathematical treatment. (Author/JM)

  7. An Investigation on Properties of Transparent Concretes

    OpenAIRE

    TOPÇU, İlker Bekir; UYGUNOĞLU, Tayfun

    2016-01-01

    Transparentconcrete is a cement-based building material which has optical properties dueto the embedded light transmitting elements within the composite. In thisstudy, the design of transparent concrete, its mechanical properties, lighttransmission properties of optical fibers and the use of optic fibers werediscussed. The study was performed as a literature review, and it was focusedon the light absorption of translucent concrete, transmission, the mechanismand losses in the transmission. In...

  8. Mechanical properties of chemically modified portuguese pinewood

    OpenAIRE

    Lopes, Duarte B; Mai, Carsten; Militz, Holger

    2014-01-01

    To turn wood into a construction material with enhanced properties, many methods of chemical modification have been developed in the last few decades. In this work, mechanical properties of pine wood were chemically modified, compared and evaluated. Maritime pine wood (Pinus pinaster) was modified with four chemical processes: 1,3-dimethylol-4,5- dihydroxyethyleneurea, N-methylol melamine formaldehyde, tetra-alkoxysilane and wax. The following mechanical properties were assessed experiment...

  9. Thixotropic Properties of Latvian Illite Containing Clays

    OpenAIRE

    Lakevičs, Vitālijs; Stepanova, Valentīna; Niedra, Santa; Dušenkova, Inga; Ruplis, Augusts

    2015-01-01

    Thixotropic properties of Latvian Devonian and Quaternary clays were studied. Dynamic viscosity of the water clay suspensions were measured with a rotating viscometer. Influence of concentration, pH and modifiers on the thixotropic clay properties was analyzed. It was found that Latvian clays have thixotropic properties. Stability of clay suspensions is described with the thixotropy hysteresis loop. Increasing the speed of the viscometer rotation, dynamic viscosity of the clay suspension decr...

  10. Mechanical properties of carbon nanotubes

    Science.gov (United States)

    Salvetat, J.-P.; Bonard, J.-M.; Thomson, N. H.; Kulik, A. J.; Forró, L.; Benoit, W.; Zuppiroli, L.

    A variety of outstanding experimental results on the elucidation of the elastic properties of carbon nanotubes are fast appearing. These are based mainly on the techniques of high-resolution transmission electron microscopy (HRTEM) and atomic force microscopy (AFM) to determine the Young's moduli of single-wall nanotube bundles and multi-walled nanotubes, prepared by a number of methods. These results are confirming the theoretical predictions that carbon nanotubes have high strength plus extraordinary flexibility and resilience. As well as summarising the most notable achievements of theory and experiment in the last few years, this paper explains the properties of nanotubes in the wider context of materials science and highlights the contribution of our research group in this rapidly expanding field. A deeper understanding of the relationship between the structural order of the nanotubes and their mechanical properties will be necessary for the development of carbon-nanotube-based composites. Our research to date illustrates a qualitative relationship between the Young's modulus of a nanotube and the amount of disorder in the atomic structure of the walls. Other exciting results indicate that composites will benefit from the exceptional mechanical properties of carbon nanotubes, but that the major outstanding problem of load transfer efficiency must be overcome before suitable engineering materials can be produced.

  11. Anisotropic properties of aligned SWNT modified poly (methyl ...

    Indian Academy of Sciences (India)

    The electrical and mechanical properties of PMMA/SWNT composite were studied as a function of SWNT orientation and concentration. The aligned SWNT modified PMMA/SWNT composite presented highly anisotropic properties. The experimental results showed that the electrical conductivity and mechanical properties of ...

  12. Physicochemical Property Guidelines for Modern Agrochemicals.

    Science.gov (United States)

    Zhang, Yu; Lorsbach, Beth; Castetter, Scott; Lambert, William T; Kister, Jeremy; Wang, Nick X; Klittich, Carla; Roth, Joshua; Sparks, Thomas C; Loso, Mike R

    2018-04-17

    The relentless need for the discovery and development of new agrochemicals continues due to driving forces such as loss of existing products through the development of resistance, the necessity for products with more favorable environmental and toxicological profiles, shifting pest spectra, and the changing agricultural needs and practices of the farming community. These new challenges underscore the demand for novel, high quality starting points to accelerate the discovery of new agrochemicals that address market challenges. This article discusses the efforts to identify the optimum ranges of physicochemical properties of agrochemicals through analysis of modern commercial products. Specifically, we reviewed literature studies examining physicochemical property effects and analyzed the properties typical of successful fungicides, herbicides, and insecticides (chewing and sap-feeding pests). From the analysis, a new set of physicochemical property guidelines for each discipline, as well as building block class, are proposed. These new guidelines should significantly aid in the discovery of next generation agrochemicals. This article is protected by copyright. All rights reserved.

  13. Symmetry and physical properties of crystals

    CERN Document Server

    Malgrange, Cécile; Schlenker, Michel

    2014-01-01

    Crystals are everywhere, from natural crystals (minerals) through the semiconductors and magnetic materials in electronic devices and computers or piezoelectric resonators at the heart of our quartz watches to electro-optical devices. Understanding them in depth is essential both for pure research and for their applications. This book provides a clear, thorough presentation of their symmetry, both at the microscopic space-group level and the macroscopic point-group level. The implications of the symmetry of crystals for their physical properties are then presented, together with their mathematical description in terms of tensors. The conditions on the symmetry of a crystal for a given property to exist then become clear, as does the symmetry of the property. The geometrical representation of tensor quantities or properties is presented, and its use in determining important relationships emphasized. An original feature of this book is that most chapters include exercises with complete solutions. This all...

  14. The Relation between the Rheological Properties of Gels and the Mechanical Properties of Their Corresponding Aerogels

    Directory of Open Access Journals (Sweden)

    Mingze Sun

    2018-04-01

    Full Text Available A series of low density, highly porous clay/poly(vinyl alcohol composite aerogels, incorporating ammonium alginate, were fabricated via a convenient and eco-friendly freeze drying method. It is significant to understand rheological properties of precursor gels because they directly affect the form of aerogels and their processing behaviors. The introduction of ammonium alginate impacted the rheological properties of colloidal gels and improved the mechanical performance of the subject aerogels. The specific compositions and processing conditions applied to those colloidal gel systems brought about different aerogel morphologies, which in turn translated into the observed mechanical properties. The bridge between gel rheologies and aerogel structures are established in the present work.

  15. Packing and Cohesive Properties of Some Locally Extracted Starches

    African Journals Online (AJOL)

    ... properties of the particles affect the packing and cohesive properties of the starches, and are important in predicting the behaviour of the starches during handling and use in pharmaceutical preparations. These properties need to be closely controlled in pre-formulation studies. Keywords: Packing and cohesive properties, ...

  16. 48 CFR 1245.511 - Audit of property control system.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Audit of property control... 1245.511 Audit of property control system. (a) The property administrator (or other Government official authorized by the contracting officer) shall audit the contractor's property control system whenever there...

  17. Electrical properties of molecular crystals

    International Nuclear Information System (INIS)

    Barraud, A.

    1968-01-01

    This literature survey summarizes the electrical properties of molecular crystals: molecular crystal structure, transport and excitation mechanisms of charge-carriers, and differences compared to inorganic semi-conductors. The main results concerning the electrical conductivity of the most-studied molecular crystals are presented, together with the optical and photo-electrical properties of these crystals. Finally the different types of electrical measurements used are reviewed, as well as the limits of each method. (author) [fr

  18. Approximation Properties for Groups and von Neumann Algebras

    DEFF Research Database (Denmark)

    Knudby, Søren

    The main topic of the thesis is approximation properties for locally compact groups with applications to operator algebras. In order to study the relationship between weak amenability and the Haagerup property, the weak Haagerup property and the weak Haagerup constant are introduced. The weak Haa...

  19. 13 CFR 143.31 - Real property.

    Science.gov (United States)

    2010-01-01

    ... percentage of participation in the cost of the original purchase to the fair market value of the property... FOR GRANTS AND COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes... subgrantee's percentage of participation in the purchase of the real property to the current fair market...

  20. Mechanical properties of gamma-aluminium oxynitride

    NARCIS (Netherlands)

    Willems, H.X.; Hal, van P.F.; With, de G.; Metselaar, R.

    1993-01-01

    Mech. properties have been measured of three compositionally different types of g-aluminum oxynitride (Alon). The compns. corresponded to 67.5, 73 and 77.5 mol% Al2O3. To characterize the Alons, lattice parameters, densities, grain sizes and optical properties were measured. The measurements for the

  1. 41 CFR 128-1.101 - Justice Property Management Regulations.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Justice Property Management Regulations. 128-1.101 Section 128-1.101 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.1-Regulation System § 128-1...

  2. 26 CFR 403.25 - Personal property subject to seizure.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Personal property subject to seizure. 403.25... AND ADMINISTRATION DISPOSITION OF SEIZED PERSONAL PROPERTY Seizures and Forfeitures § 403.25 Personal property subject to seizure. Personal property may be seized by the Commissioner of Internal Revenue or his...

  3. Review of high-level waste form properties

    International Nuclear Information System (INIS)

    Rusin, J.M.

    1980-12-01

    This report is a review of waste form options for the immobilization of high-level-liquid wastes from the nuclear fuel cycle. This review covers the status of international research and development on waste forms as of May 1979. Although the emphasis in this report is on waste form properties, process parameters are discussed where they may affect final waste form properties. A summary table is provided listing properties of various nuclear waste form options. It is concluded that proposed waste forms have properties falling within a relatively narrow range. In regard to crystalline versus glass waste forms, the conclusion is that either glass of crystalline materials can be shown to have some advantage when a single property is considered; however, at this date no single waste form offers optimum properties over the entire range of characteristics investigated. A long-term effort has been applied to the development of glass and calcine waste forms. Several additional waste forms have enough promise to warrant continued research and development to bring their state of development up to that of glass and calcine. Synthetic minerals, the multibarrier approach with coated particles in a metal matrix, and high pressure-high temperature ceramics offer potential advantages and need further study. Although this report discusses waste form properties, the total waste management system should be considered in the final selection of a waste form option. Canister design, canister materials, overpacks, engineered barriers, and repository characteristics, as well as the waste form, affect the overall performance of a waste management system. These parameters were not considered in this comparison

  4. Amino acid properties conserved in molecular evolution.

    Directory of Open Access Journals (Sweden)

    Witold R Rudnicki

    Full Text Available That amino acid properties are responsible for the way protein molecules evolve is natural and is also reasonably well supported both by the structure of the genetic code and, to a large extent, by the experimental measures of the amino acid similarity. Nevertheless, there remains a significant gap between observed similarity matrices and their reconstructions from amino acid properties. Therefore, we introduce a simple theoretical model of amino acid similarity matrices, which allows splitting the matrix into two parts - one that depends only on mutabilities of amino acids and another that depends on pairwise similarities between them. Then the new synthetic amino acid properties are derived from the pairwise similarities and used to reconstruct similarity matrices covering a wide range of information entropies. Our model allows us to explain up to 94% of the variability in the BLOSUM family of the amino acids similarity matrices in terms of amino acid properties. The new properties derived from amino acid similarity matrices correlate highly with properties known to be important for molecular evolution such as hydrophobicity, size, shape and charge of amino acids. This result closes the gap in our understanding of the influence of amino acids on evolution at the molecular level. The methods were applied to the single family of similarity matrices used often in general sequence homology searches, but it is general and can be used also for more specific matrices. The new synthetic properties can be used in analyzes of protein sequences in various biological applications.

  5. 26 CFR 1.48-2 - New section 38 property.

    Science.gov (United States)

    2010-04-01

    ... Computing Credit for Investment in Certain Depreciable Property § 1.48-2 New section 38 property. (a) In... shall be taken into account as the basis of new section 38 property in determining qualified investment... taken into account by the taxpayer in computing qualified investment in new section 38 property. Example...

  6. Evaluating sensitivity of unsaturated soil properties

    International Nuclear Information System (INIS)

    Abdel-Rahman, R.O.; El-Kamash, A.M.; Nagy, M.E.; Khalill, M.Y.

    2005-01-01

    The assessment of near surface disposal performance relay on numerical models of groundwater flow and contaminant transport. These models use the unsaturated soil properties as input parameters, which are subject to uncertainty due to measurements errors and the spatial variability in the subsurface environment. To ascertain how much the output of the model will depend on the unsaturated soil properties the parametric sensitivity analysis is used. In this paper, a parametric sensitivity analysis of the Van Genuchten moisture retention characteristic (VGMRC) model will be presented and conducted to evaluate the relative importance of the unsaturated soil properties under different pressure head values that represent various dry and wet conditions. (author)

  7. Modeling the thermodynamic properties of plutonium

    International Nuclear Information System (INIS)

    Stan, Marius

    2000-01-01

    The golden dream of any modeling enterprise is to predict the properties of the studied system in a new and often 'hostile' environment. The basis of this kind of work is the careful, accurate assessment of the system properties in normal conditions. What 'normal conditions' means for plutonium is an interesting question itself. This work is dedicated to modeling only a fraction of the remarkable characteristics of this 'mysterious' material, that is the thermodynamic properties of its six allotropic phases (seven under pressure), the liquid phase, and the vapor phase. The goal is to provide valuable information for the calculation of alloyed plutonium phase diagrams

  8. SIMMER-III analytic thermophysical property model

    International Nuclear Information System (INIS)

    Morita, K; Tobita, Y.; Kondo, Sa.; Fischer, E.A.

    1999-05-01

    An analytic thermophysical property model using general function forms is developed for a reactor safety analysis code, SIMMER-III. The function forms are designed to represent correct behavior of properties of reactor-core materials over wide temperature ranges, especially for the thermal conductivity and the viscosity near the critical point. The most up-to-date and reliable sources for uranium dioxide, mixed-oxide fuel, stainless steel, and sodium available at present are used to determine parameters in the proposed functions. This model is also designed to be consistent with a SIMMER-III model on thermodynamic properties and equations of state for reactor-core materials. (author)

  9. 41 CFR 101-1.101 - Federal Property Management Regulations System.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Federal Property Management Regulations System. 101-1.101 Section 101-1.101 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS GENERAL 1-INTRODUCTION 1.1...

  10. Inventory of Owned and Leased Properties (IOLP)

    Data.gov (United States)

    General Services Administration — The Inventory of Owned and Leased Properties (IOLP) allows users to search properties owned and leased by the General Services Administration (GSA) across the United...

  11. Influence of Macroeconomic Factors on Residential Property ...

    African Journals Online (AJOL)

    Sultan

    exerted by macroeconomic factors on residential property returns in Abuja. The backward .... explanatory power and positive influence of employment and ...... Project. Management In Property Development: the Nigeria experience. Ibadan:.

  12. 10 CFR 1042.120 - Transfers of property.

    Science.gov (United States)

    2010-01-01

    ... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction § 1042.120 Transfers of property. If a recipient sells or otherwise transfers property financed in whole or in part with Federal financial...

  13. Propertis of solidified radioactive wastes from commercial LWRs

    International Nuclear Information System (INIS)

    Neilson, R.M. Jr.; Colombo, P.

    1978-01-01

    A study has been performed to characterize the properties of solidified radioactive wastes generated in the liquid radwaste treatment systems at LWRs. The properties which have been studied are those which are pertinent in defining the relative potential for the release of radionuclides to the environment as well as others relating to the evaluation of various solidification agents on an economic and feasibility basis. The use of standard testing procedures in measuring these properties allows an intercomparison of respective properties between various types of solidified waste forms. The leachability, mechanical properties, thermal stability, radiation stability, and thermal properties of hydraulic cement, ureaformaldehyde, bitumen, and addition type polymer waste forms have been measured. In addition, the chemical sensitivity, volumetric efficiency and radiation shielding characteristics of these waste forms have been studied. Emphasis in this paper is placed on the results of studies concerning chemical compatibility of solidification agents with specific waste streams, volumetric efficiency, free standing water, and leachability

  14. Application-related properties of giant magnetostrictive thin films

    International Nuclear Information System (INIS)

    Lim, S.H.; Kim, H.J.; Na, S.M.; Suh, S.J.

    2002-01-01

    In an effort to facilitate the utilization of giant magnetostrictive thin films in microdevices, application-related properties of these thin films, which include induced anisotropy, residual stress and corrosion properties, are investigated. A large induced anisotropy with an energy of 6x10 4 J/m 3 is formed in field-sputtered amorphous Sm-Fe-B thin films, resulting in a large magnetostriction anisotropy. Two components of residual stress, intrinsic compressive stress and tensile stress due to the difference of the thermal expansion coefficients between the substrate and thin film, are identified. The variation of residual stress with fabrication parameter and annealing temperature, and its influence on mechanical bending and magnetic properties are examined. Better corrosion properties are observed in Sm-Fe thin films than in Tb-Fe. Corrosion properties of Tb-Fe thin films, however, are much improved with the introduction of nitrogen to the thin films without deteriorating magnetostrictive properties

  15. Handbook for tensile properties of austenitic stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Kim, D. W.; Ryu, W. S.; Jang, J. S.; Kim, S. H.; Kim, W. G.; Chung, M. K.; Han, C. H. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2000-03-01

    Database system of nuclear materials has not been developed and the physical and mechanical properties of materials used in nuclear power plant are not summarized systematically in Korea. Although Korea designs nuclear power plant, many materials used in nuclear power plant are imported because we do not have database system of nuclear material yet and it was hard to select a proper material for the structural materials of nuclear power plant. To develop database system of nuclear materials, data of mechanical, corrosion, irradiation properties are needed. Of theses properties, tensile properties are tested and summarized in this report. Tensile properties of stainless steel used in nuclear reactor internal were investigated. Data between Korea Atomic Energy Research Institute and foreign laboratory were compared to determine the precision of the result. To develope database system, materials, chemical composition, heat treatment, manufacturing process, and grain size were classified. Tensile properties were tested and summarized to use input data of database system. 9 figs., 9 tabs. (Author)

  16. properties of anthraquinone

    African Journals Online (AJOL)

    The electrochemical and energetic properties of a carbon paste electrode. (CPE) Containing ... 9,10-Anthraquinone is the most energy-rich anodic material known [1,2]). ... Ethiop. 1995, 9(2). G.S.T.P4 and a SEFRAM chart recorder was used.

  17. Review of particle properties

    International Nuclear Information System (INIS)

    Montanet, L.; Gieselmann, K. Technical Associate; Barnett, R.M.; Groom, D.E.; Trippe, T.G.; Wohl, C.G.; Armstrong, B. Technical Associate; Wagman, G.S. Technical Associate; Murayama, H.; Stone, J.; Hernandez, J.J.; Porter, F.C.; Morrison, R.J.; Manohar, A.; Aguilar-Benitez, M.; Caso, C.; Lantero, P. Technical Associate; Crawford, R.L.; Roos, M.; Toernqvist, N.A.; Hayes, K.G.; Hoehler, G.

    1994-01-01

    This biennial review summarizes much of Particle Physics. Using data from previous editions, plus 2300 new measurements from 700 papers, we list evaluate, and average measured properties of gauge bosons, leptons, quarks, mesons, and baryons. We also summarize searches for hypothetical particles such as Higgs bosons, heavy neutrinos, monopoles, and supersymmetric particles. All the particle properties and search limits are listed in Summary Tables. We also give numerous tables, figures, formulae, and reviews of topics such as the Standard Model, particle detectors, probability, and statistics. A booklet is available containing the Summary Tables and abbreviated versions of some of the other sections of this full Review

  18. 41 CFR 128-1.5006-2 - Property management officer (PMO).

    Science.gov (United States)

    2010-07-01

    ... leadership, guidance, and operating procedures for personal property management functions. (b) Ensuring... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Property management officer (PMO). 128-1.5006-2 Section 128-1.5006-2 Public Contracts and Property Management Federal Property...

  19. Fatigue Properties of Aged Mod. 9Cr-1Mo

    International Nuclear Information System (INIS)

    Kim, Dae Whan; Kim, Sung Ho; Lee, Chan Bock

    2007-01-01

    Ferritic/Martensitic steel has a good mechanical properties and a lower thermal expansion coefficient than austenitic stainless steel. Mechanical property of Mod. 9Cr-1Mo steel is less than austenitic stainless steel at high temperature. High temperature mechanical properties are affected by precipitation for Mod. 9Cr-1Mo. FMS steel is used for long time at high temperature and the effect of aging on mechanical properties is very important. In this study, low cycle fatigue properties with aging were investigated

  20. ORGANIZATIONAL SUPPORT OF INTELLECTUAL PROPERTY MANAGEMENT AT THE ENTERPRISE

    Directory of Open Access Journals (Sweden)

    I. Kornilova

    2015-08-01

    Full Text Available The article deals with theoretical issues of organizational support of intellectual property management at the enterprise. It is defined the nature, goals, objectives organization of intellectual property. It is selected the features, factors of influence on the choice of organizational structure and organizational form of intellectual property management on an enterprise. It is proposed systematization forms of organizational maintenance of intellectual property management at different classification criteria. Attention is paid to consider outsourcing forms of operations with intellectual property.

  1. Testing and Modeling of Machine Properties in Resistance Welding

    DEFF Research Database (Denmark)

    Wu, Pei

    The objective of this work has been to test and model the machine properties including the mechanical properties and the electrical properties in resistance welding. The results are used to simulate the welding process more accurately. The state of the art in testing and modeling machine properties...... as real projection welding tests, is easy to realize in industry, since tests may be performed in situ. In part II, an approach of characterizing the electrical properties of AC resistance welding machines is presented, involving testing and mathematical modelling of the weld current, the firing angle...... in resistance welding has been described based on a comprehensive literature study. The present thesis has been subdivided into two parts: Part I: Mechanical properties of resistance welding machines. Part II: Electrical properties of resistance welding machines. In part I, the electrode force in the squeeze...

  2. Nanosilicon properties, synthesis, applications, methods of analysis and control

    CERN Document Server

    Ischenko, Anatoly A; Aslalnov, Leonid A

    2015-01-01

    Nanosilicon: Properties, Synthesis, Applications, Methods of Analysis and Control examines the latest developments on the physics and chemistry of nanosilicon. The book focuses on methods for producing nanosilicon, its electronic and optical properties, research methods to characterize its spectral and structural properties, and its possible applications. The first part of the book covers the basic properties of semiconductors, including causes of the size dependence of the properties, structural and electronic properties, and physical characteristics of the various forms of silicon. It presents theoretical and experimental research results as well as examples of porous silicon and quantum dots. The second part discusses the synthesis of nanosilicon, modification of the surface of nanoparticles, and properties of the resulting particles. The authors give special attention to the photoluminescence of silicon nanoparticles. The third part describes methods used for studying and controlling the structure and pro...

  3. Thermophysical Properties of Ammonium-Based Bis{(trifluoromethyl)sulfonyl}imide Ionic Liquids: Volumetric and Transport Properties

    Czech Academy of Sciences Publication Activity Database

    Machanová, Karolina; Boisset, A.; Sedláková, Zuzana; Anouti, M.; Bendová, Magdalena; Jacquemin, J.

    2012-01-01

    Roč. 57, č. 8 (2012), s. 2227-2235 ISSN 0021-9568. [European Conference on Thermophysical Properties /19./. Thessaloniki, 28.08.2011-01.09.2011] R&D Projects: GA ČR GP203/09/P141; GA MŠk(CZ) MEB021009 Grant - others:Égide PHC(FR) 22000XB Institutional support: RVO:67985858 Keywords : ionic liquids * density * transport properties Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.004, year: 2012

  4. Corrosion Properties of Sintered and Wrought Stainless Seel

    DEFF Research Database (Denmark)

    Mathiesen, Troels; Maahn, Ernst Emanuel

    1997-01-01

    The corrosion properties of a range of stainless steels produced by powder metallurgy (PM) are compared with wrought AISI304 and AISI316 Steel. Characterisation of the passivation properties in 0.5M H2SO4 and pittingresistance in 0.3% chloride solution by polarisation show properties...

  5. 13 CFR 125.4 - Government property sales assistance.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Government property sales... CONTRACTING PROGRAMS § 125.4 Government property sales assistance. (a) The purpose of SBA's Government property sales assistance program is to: (1) Insure that small businesses obtain their fair share of all...

  6. Statistical study of 22 K steel machanical properties

    International Nuclear Information System (INIS)

    Zhevanov, O.Ya.; Kolpishon, Eh.Yu.; Egorov, M.F.

    1988-01-01

    Test results of 100 specimens of 22 K steel are analyzed for determination of relation between the technology of production, structure and properties of steels. Mechanical properties (ultimate strength and yield strength, relative elongation, relative narrowing, impact strength, hardness) and structural parameters are considered. Investigation into the regressive dependence between mechanical properties and the diameter of the indentor mark when determining Brinell hardness have shown that it is advisable to replace the testing mechanical properties at static extension by the control of hardness and microstructure

  7. Consistent Prediction of Properties of Systems with Lipids

    DEFF Research Database (Denmark)

    Cunico, Larissa; Ceriani, Roberta; Sarup, Bent

    Equilibria between vapour, liquid and/or solid phases, pure component properties and also the mixture-phase properties are necessary for synthesis, design and analysis of different unit operations found in the production of edible oils, fats and biodiesel. A systematic numerical analysis....... Lipids are found in almost all mixtures involving edible oils, fats and biodiesel. They are also being extracted for use in the pharma-industry. A database for pure components (lipids) present in these processes and mixtures properties has been developed and made available for different applications...... (model development, property verification, property prediction, etc.). The database has verified data for fatty acids, acylglycerols, fatty esters, fatty alcohols, vegetable oils, biodiesel and minor compounds as phospholipids, tocopherols, sterols, carotene and squalene, together with a user friendly...

  8. Mechanical properties of molybdenum-sealing glass-ceramics

    International Nuclear Information System (INIS)

    Swearengen, J.C.; Eagan, R.J.

    1975-07-01

    Elastic constants, thermal expansion, strength, and fracture toughness were determined for a molybdenum-sealing glass-ceramic containing approximately 31 volume percent Zn 2 SiO 4 crystals in a glass matrix. The microstructure was studied for two different crystallization treatments and moderate changes in composition. Mechanical properties of the composite were compared with the properties of the constituent phases through application of mixture theory and by fractographic observations. The reinforcing effects of the crystal phase at room temperature are evident in comparison with the properties of the residual glass but not necessarily in comparison with the parent glass. Fracture toughness of the composite depends primarily upon additive properties of the separate phases instead of by interactive effects such as microcracks. (U.S.)

  9. The Strong Disjoint Blow-Up/Collapse Property

    Directory of Open Access Journals (Sweden)

    Héctor N. Salas

    2013-01-01

    Full Text Available Let be a topological vector space, and let be the algebra of continuous linear operators on . The operators are disjoint hypercyclic if there is such that the orbit is dense in . Bès and Peris have shown that if satisfy the Disjoint Blow-up/Collapse property, then they are disjoint hypercyclic. In a recent paper Bès, Martin, and Sanders, among other things, have characterized disjoint hypercyclic -tuples of weighted shifts in terms of this property. We introduce the Strong Disjoint Blow-up/Collapse property and prove that if satisfy this new property, then they have a dense linear manifold of disjoint hypercyclic vectors. This allows us to give a partial affirmative answer to one of their questions.

  10. High-temperature of thermodynamic properties of sodium

    Energy Technology Data Exchange (ETDEWEB)

    Padilla, A. Jr.

    1977-01-01

    The set of high-temperature thermodynamic properties for sodium in the two-phase and subcooled-liquid regions which was previously recommended, has been modified to incorporate recent experimental data. In particular, replacement of the previously estimated critical constants with experimentally-determined values has resulted in substantial differences in the region of the critical point. The following thermodynamic properties were determined: pressure, density, enthalpy, entropy, internal energy, compressibility (adiabatic and isothermal), thermal expansion coefficient, thermal pressure coefficient, and specific heat (constant-pressure and constant-volume). These properties were determined for the saturated liquid, saturated vapor, subcooled liquid, and superheated vapor. The superheated vapor properties are limited to low pressures and more work is required to extend them to higher pressures. The supercritical region was not investigated.

  11. Five essays in property valuation

    OpenAIRE

    Yang, Zan

    2000-01-01

    This doctoral thesis consists of five self-contained essayspresented to the Faculty Board of the Royal Institute ofTechnology. Property valuation is a central issue that forms acommon thread in the analysis in these essays. In the thesisproperty is considered in a mixed asset context in an attemptto build a bridge between valuation, property investment andfinancial theory. The object of the thesis is to value propertyfor finance, sales and purchases and investment. Theinvestigation of the the...

  12. Properties of minor actinide nitrides

    International Nuclear Information System (INIS)

    Takano, Masahide; Itoh, Akinori; Akabori, Mitsuo; Arai, Yasuo; Minato, Kazuo

    2004-01-01

    The present status of the research on properties of minor actinide nitrides for the development of an advanced nuclear fuel cycle based on nitride fuel and pyrochemical reprocessing is described. Some thermal stabilities of Am-based nitrides such as AmN and (Am, Zr)N were mainly investigated. Stabilization effect of ZrN was cleary confirmed for the vaporization and hydrolytic behaviors. New experimental equipments for measuring thermal properties of minor actinide nitrides were also introduced. (author)

  13. Property Rights, Finance, and Entrepreneurship

    OpenAIRE

    Simon Johnson; John McMillan; Christopher Woodruff

    1999-01-01

    Is investment constrained more by insecure property rights or by limited external finance? For five transition economies in Eastern Europe and the former Soviet Union we find that weak property rights limit the reinvestment of profits in startup ma nufacturing firms. Access to credit does not appear to explain differences in investment. At least in the early stages of post-communist reform, retained earnings appear to have been enough to finance the investments that managers wanted to make.

  14. Surface properties of beached plastics.

    Science.gov (United States)

    Fotopoulou, Kalliopi N; Karapanagioti, Hrissi K

    2015-07-01

    Studying plastic characteristics in the marine environment is important to better understand interaction between plastics and the environment. In the present study, high-density polyethylene (HDPE), polyethylene terephalate (PET), and polyvinyl chloride (PVC) samples were collected from the coastal environment in order to study their surface properties. Surface properties such as surface functional groups, surface topography, point of zero charge, and color change are important factors that change during degradation. Eroded HDPE demonstrated an altered surface topography and color and new functional groups. Eroded PET surface was uneven, yellow, and occasionally, colonized by microbes. A decrease in Fourier transform infrared (FTIR) peaks was observed for eroded PET suggesting that degradation had occurred. For eroded PVC, its surface became more lamellar and a new FTIR peak was observed. These surface properties were obtained due to degradation and could be used to explain the interaction between plastics, microbes, and pollutants.

  15. Property (RD) for Hecke Pairs

    International Nuclear Information System (INIS)

    Shirbisheh, Vahid

    2012-01-01

    As the first step towards developing noncommutative geometry over Hecke C ∗ -algebras, we study property (RD) (Rapid Decay) for Hecke pairs. When the subgroup H in a Hecke pair (G, H) is finite, we show that the Hecke pair (G, H) has (RD) if and only if G has (RD). This provides us with a family of examples of Hecke pairs with property (RD). We also adapt Paul Jolissant’s works in Jolissaint (J K-Theory 2:723–735, 1989; Trans Amer Math Soc 317(1):167–196, 1990) to the setting of Hecke C ∗ -algebras and show that when a Hecke pair (G, H) has property (RD), the algebra of rapidly decreasing functions on the set of double cosets is closed under holomorphic functional calculus of the associated (reduced) Hecke C ∗ -algebra. Hence they have the same K 0 -groups.

  16. Fiduciary transfer of property rights

    Directory of Open Access Journals (Sweden)

    Đurđić Tamara

    2011-01-01

    Full Text Available Fiduciary transfer of property rights for the purpose of loan security represents the non-possessory form of collateral, which experiences renaissance in the comparative law. It is a complex legal institute, which is subject to numerous concerns and can be viewed from different perspectives, due to the large number of its specific features - non typical for the Continental European legal systems. The paper discusses disputed issues related to defining the causa, as well as the legal grounds, for fiduciary transfer of property rights, its legal nature and the justification thereof. Aiming at more adequate understanding of this complex Property Law institute and finding satisfactory answers to some of the disputed issues the legal theory has opened, the author analyses provisions of current legislation in Montenegro, which was the first country in the Region to regulate this non-possessory form of collateral.

  17. Effect of physical, chemical and electro-kinetic properties of pumice samples on radiation shielding properties of pumice material

    International Nuclear Information System (INIS)

    Tapan, Mücip; Yalçın, Zeynel; İçelli, Orhan; Kara, Hüsnü; Orak, Salim; Özvan, Ali; Depci, Tolga

    2014-01-01

    Highlights: • Radiation shielding properties of pumice materials are studied. • The relationship between physical, chemical and electro-kinetic properties pumice samples is identified. • The photon atomic parameters are important for the absorber peculiarity of the pumices. - Abstract: Pumice has been used in cement, concrete, brick, and ceramic industries as an additive and aggregate material. In this study, some gamma-ray photon absorption parameters such as the total mass attenuation coefficients, effective atomic number and electronic density have been investigated for six different pumice samples. Numerous values of energy related parameters from low energy (1 keV) to high energy (100 MeV) were calculated using WinXCom programme. The relationship between radiation shielding properties of the pumice samples and their physical, chemical and electro-kinetic properties was evaluated using simple regression analysis. Simple regression analysis indicated a strong correlation between photon energy absorption parameters and density and SiO 2 , Fe 2 O 3 , CaO, MgO, TiO 2 content of pumice samples in this study. It is found that photon energy absorption parameters are not related to electro-kinetic properties of pumice samples

  18. Influence of ionizing radiation and use of plasticizers on the mechanical properties and barrier properties of biodegradable films

    International Nuclear Information System (INIS)

    Ponce, Patricia; Parra, Duclerc F.; Carr, Laura G.; Sato, Juliana S.; Lugao, Ademar B.

    2005-01-01

    This work reports the influence of radiation and plasticizers on the barrier properties [water vapour permeability (WVP)] and mechanical properties (tensile strength and elongation) of edible films made of starch. These films were prepared with 4 g of starch/100 mL of water; 2-10 g polyethylene glycol (PEG)/100 g starch; and at natural pH. Tensile strength and percentage elongation were measured using a Mechanical Universal Testing Machine Instron 4400R and the water vapour permeability was determined according to ASTM E96-80 (ASTM, 1989). The mechanical properties of starch films are influenced by the plasticizer concentration. An increase in PEG content showed a considerable increase in elongation percentage and a decrease in the tensile strength of the films, also increase the permeability of the films in water. After irradiation, the barrier properties [water vapour permeability (WVP)] and mechanical properties (tensile strength and elongation) of the films were improved due to chemical reactions among polymer molecules. The films were irradiated at room temperature with gamma radiation. Irradiated starch cassava films with polyethylene glycol (PEG) as plasticizer have good flexibility and low water permeability, which indicate potential application as edible films (author)

  19. Selected mechanical properties of modified beech wood

    Directory of Open Access Journals (Sweden)

    Jiří Holan

    2008-01-01

    Full Text Available This thesis deals with an examination of mechanical properties of ammonia treated beach wood with a trademark Lignamon. For determination mechanical properties were used procedures especially based on ČSN. From the results is noticeable increased density of wood by 22% in comparison with untreated beach wood, which makes considerable increase of the most mechanical wood properties. Considering failure strength was raised by 32% and modulus of elasticity was raised at average about 46%.

  20. 26 CFR 1.48-3 - Used section 38 property.

    Science.gov (United States)

    2010-04-01

    ... Computing Credit for Investment in Certain Depreciable Property § 1.48-3 Used section 38 property. (a) In... computing qualified investment is $800 ($2,000 less $1,200). Example 4. In 1962, C acquires property 1, an... purposes of computing qualified investment the cost of property 2 is not reduced by any part of the...

  1. 26 CFR 20.2031-9 - Valuation of other property.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Valuation of other property. 20.2031-9 Section... Valuation of other property. The valuation of any property not specifically described in §§ 20.2031-2 to 20... future interest in property not subject to valuation in accordance with the actuarial principles set...

  2. Path innovation of rural property mortgage financing in China

    Directory of Open Access Journals (Sweden)

    Wu Yongchao

    2016-01-01

    Full Text Available Rural property mortgage financing, as an important breakthrough to deepen the reform of rural property right system and financial system, is an important approach to increase the farmers’ property income. Besides, rural property mortgage financing is of great significance in implementing the rural land usufructuary right and meeting the demand of medium-and-long-term and large-scale operation of the funds used in agricultural production. Under the existing institutional arrangement, the property mortgage financing in the rural areas of our country still is faced with many obstacles, and it is still at the stage of low level development. In this paper, closely based on the acceptability and the difficulty in the mortgaged property involving in legal disposal, the author puts forward important methods: clearly define the ownership, unify the urban and rural markets, increase the participation enthusiasm of financing bodies, and improve the supporting policies to promote property mortgage financing in rural area. Finally, the government should give farmers more property rights and revitalize the usufructuary right of agricultural land and its derivative right.

  3. Unravelling the materials genome: Symmetry relationships in alloy properties

    International Nuclear Information System (INIS)

    Toda-Caraballo, Isaac; Galindo-Nava, Enrique I.; Rivera-Díaz-del-Castillo, Pedro E.J.

    2013-01-01

    Highlights: ► Research strategy for Accelerated Metallurgy project is outlined. ► Surprising symmetry among atomic, nanoscale and mechanical properties. ► Generalisation of Ashby diagrams via principal component analysis. ► Atomic-related properties can be described with linear regression. ► Mechanical properties modelled via Kocks–Mecking-type physical method. -- Abstract: Metals and alloys have been indispensable for technological progress, but only a fraction of the possible ternary systems (combinations of three elements) is known. Statistical inference methods combined with physical models are presented to discover new systems of enhanced properties. It is demonstrated that properties originating from atomic-level interactions can be described employing a linear regression analysis, but properties incorporating microstructural and thermal history effects require a balance between physical and statistical modelling. In spite of this, there is a remarkable degree of symmetry among all properties, and by employing a principal components analysis it is shown that ten properties essential to engineering can be described well in a three dimensional space. This will aid in the discovery of novel alloying systems

  4. Unravelling the materials genome: Symmetry relationships in alloy properties

    Energy Technology Data Exchange (ETDEWEB)

    Toda-Caraballo, Isaac [Department of Materials Science and Metallurgy, University of Cambridge New Museums Site, Pembroke Street, Cambridge, CB2 3QZ (United Kingdom); Galindo-Nava, Enrique I. [Department of Materials Science and Metallurgy, University of Cambridge New Museums Site, Pembroke Street, Cambridge, CB2 3QZ (United Kingdom); Delft University of Technology, Mekelweg 2, Delft 2628 CD (Netherlands); Rivera-Díaz-del-Castillo, Pedro E.J., E-mail: pejr2@cam.ac.uk [Department of Materials Science and Metallurgy, University of Cambridge New Museums Site, Pembroke Street, Cambridge, CB2 3QZ (United Kingdom)

    2013-07-25

    Highlights: ► Research strategy for Accelerated Metallurgy project is outlined. ► Surprising symmetry among atomic, nanoscale and mechanical properties. ► Generalisation of Ashby diagrams via principal component analysis. ► Atomic-related properties can be described with linear regression. ► Mechanical properties modelled via Kocks–Mecking-type physical method. -- Abstract: Metals and alloys have been indispensable for technological progress, but only a fraction of the possible ternary systems (combinations of three elements) is known. Statistical inference methods combined with physical models are presented to discover new systems of enhanced properties. It is demonstrated that properties originating from atomic-level interactions can be described employing a linear regression analysis, but properties incorporating microstructural and thermal history effects require a balance between physical and statistical modelling. In spite of this, there is a remarkable degree of symmetry among all properties, and by employing a principal components analysis it is shown that ten properties essential to engineering can be described well in a three dimensional space. This will aid in the discovery of novel alloying systems.

  5. Mechanical Properties of Moringa ( Moringa oleifera ) Seeds in ...

    African Journals Online (AJOL)

    Mechanical properties are very important in the design of machines and the analysis of the behaviour of products during agricultural processing. In this research work, the mechanical properties of Moringa were determined as design parameters for the development of an oil expeller for the crop. The properties were the ...

  6. 24 CFR 201.20 - Property improvement loan eligibility.

    Science.gov (United States)

    2010-04-01

    ... estimated cost. (2) The loan proceeds shall be used only to finance property improvements that substantially protect or improve the basic livability or utility of the property. The Secretary will establish a list of... the Secretary before making a loan. (3) The loan proceeds shall only be used to finance property...

  7. Chapter 5: The numerus clausus of property rights

    NARCIS (Netherlands)

    Akkermans, Bram; Graziadei, Michele; Smith, Lionel

    2017-01-01

    The numerus clausus of property rights is one of the fundamental principles of property law. It refers to the idea that both the number and content of property rights is limited and is traditionally placed in contrast to party autonomy, which reigns in contract law. Parties can only shape their

  8. Physical Properties of Gas Hydrates: A Review

    Energy Technology Data Exchange (ETDEWEB)

    Gabitto, Jorge [Prairie View A& M University; Tsouris, Costas [ORNL

    2010-01-01

    Methane gas hydrates in sediments have been studied by several investigators as a possible future energy resource. Recent hydrate reserves have been estimated at approximately 1016?m3 of methane gas worldwide at standard temperature and pressure conditions. In situ dissociation of natural gas hydrate is necessary in order to commercially exploit the resource from the natural-gas-hydrate-bearing sediment. The presence of gas hydrates in sediments dramatically alters some of the normal physical properties of the sediment. These changes can be detected by field measurements and by down-hole logs. An understanding of the physical properties of hydrate-bearing sediments is necessary for interpretation of geophysical data collected in field settings, borehole, and slope stability analyses; reservoir simulation; and production models. This work reviews information available in literature related to the physical properties of sediments containing gas hydrates. A brief review of the physical properties of bulk gas hydrates is included. Detection methods, morphology, and relevant physical properties of gas-hydrate-bearing sediments are also discussed.

  9. Electrical properties of dislocations in III-Nitrides

    Energy Technology Data Exchange (ETDEWEB)

    Cavalcoli, D.; Minj, A.; Pandey, S.; Cavallini, A. [Physics and Astronomy Dept. University of Bologna, Italy viale C Berti Pichat 6/II, Bologna (Italy)

    2014-02-21

    Research on GaN, AlN, InN (III-N) and their alloys is achieving new heights due their high potential applications in photonics and electronics. III-N semiconductors are mostly grown epitaxially on sapphire, and due to the large lattice mismatch and the differences in the thermal expansion coefficients, the structures usually contain many threading dislocations (TDs). While their structural properties have been widely investigated, their electrical characteristics and their role in the transport properties of the devices are still debated. In the present contribution we will show conductive AFM studies of TDs in GaN and Al/In GaN ternary alloys to evidence the role of strain, different surface polarity and composition on their electrical properties. Local I-V curves measured at TDs allowed us to clarify their role in the macroscopic electrical properties (leakage current, mobilities) of III-N based devices. Samples obtained by different growers (AIXTRON, III-V Lab) were studied. The comparison between the results obtained in the different alloys allowed us to understand the role of In and Al on the TDs electrical properties.

  10. Electrical properties of dislocations in III-Nitrides

    Science.gov (United States)

    Cavalcoli, D.; Minj, A.; Pandey, S.; Cavallini, A.

    2014-02-01

    Research on GaN, AlN, InN (III-N) and their alloys is achieving new heights due their high potential applications in photonics and electronics. III-N semiconductors are mostly grown epitaxially on sapphire, and due to the large lattice mismatch and the differences in the thermal expansion coefficients, the structures usually contain many threading dislocations (TDs). While their structural properties have been widely investigated, their electrical characteristics and their role in the transport properties of the devices are still debated. In the present contribution we will show conductive AFM studies of TDs in GaN and Al/In GaN ternary alloys to evidence the role of strain, different surface polarity and composition on their electrical properties. Local I-V curves measured at TDs allowed us to clarify their role in the macroscopic electrical properties (leakage current, mobilities) of III-N based devices. Samples obtained by different growers (AIXTRON, III-V Lab) were studied. The comparison between the results obtained in the different alloys allowed us to understand the role of In and Al on the TDs electrical properties.

  11. Data-Driven RDF Property Semantic-Equivalence Detection Using NLP Techniques

    OpenAIRE

    Rico, Mariano; Mihindukulasooriya, Nandana; Gómez-Pérez, A.

    2016-01-01

    DBpedia extracts most of its data from Wikipedia’s infoboxes. Manually-created “mappings” link infobox attributes to DBpedia ontology properties (dbo properties) producing most used DBpedia triples. However, infoxbox attributes without a mapping produce triples with properties in a different namespace (dbp properties). In this position paper we point out that (a) the number of triples containing dbp properties is significant compared to triples containing dbo properties for the DBpedia instan...

  12. 10 CFR 5.120 - Transfers of property.

    Science.gov (United States)

    2010-01-01

    ... FEDERAL FINANCIAL ASSISTANCE Introduction § 5.120 Transfers of property. If a recipient sells or otherwise transfers property financed in whole or in part with Federal financial assistance to a transferee that...

  13. Properties of plutonium

    International Nuclear Information System (INIS)

    Ahn, Jin Su; Yoon, Hwan Ki; Min, Kyung Sik; Kim, Hyun Tae; Ahn, Jong Sung; Kwag, Eon Ho; Ryu, Keon Joong

    1996-03-01

    Plutonium has unique chemical and physical properties. Its uniqueness in use has led to rare publications, in Korea. This report covers physical aspects of phase change of metal plutonium, mechanical properties, thermal conductivity, etc, chemical aspects of corrosion, oxidation, how to produce plutonium from spent fuels by describing various chemical treatment methods, which are currently used and were used in the past. It also contains characteristics of the purex reprocessing process which is the most widely used nowadays. And show processes to purify and metalize from recovered plutonium solution. Detection and analysis methods are introduced with key pints for handling, critical safety, toxicity, and effects on peoples. This report gives not only a general idea on what plutonium is, rather than deep technical description, but also basic knowledge on plutonium production and safeguards diversion from the view point of nonproliferation. 18 refs. (Author) .new

  14. Properties of plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Jin Su; Yoon, Hwan Ki; Min, Kyung Sik; Kim, Hyun Tae; Ahn, Jong Sung; Kwag, Eon Ho; Ryu, Keon Joong [Korea Atomic Energy Research Institute, Daeduk (Korea, Republic of)

    1996-03-01

    Plutonium has unique chemical and physical properties. Its uniqueness in use has led to rare publications, in Korea. This report covers physical aspects of phase change of metal plutonium, mechanical properties, thermal conductivity, etc, chemical aspects of corrosion, oxidation, how to produce plutonium from spent fuels by describing various chemical treatment methods, which are currently used and were used in the past. It also contains characteristics of the purex reprocessing process which is the most widely used nowadays. And show processes to purify and metalize from recovered plutonium solution. Detection and analysis methods are introduced with key pints for handling, critical safety, toxicity, and effects on peoples. This report gives not only a general idea on what plutonium is, rather than deep technical description, but also basic knowledge on plutonium production and safeguards diversion from the view point of nonproliferation. 18 refs. (Author) .new.

  15. Hygrothermal Properties and Performance of Sea Grass Insulation

    DEFF Research Database (Denmark)

    Eriksen, Marlene Stenberg Hagen; Laursen, Theresa Back; Rode, Carsten

    2008-01-01

    In the attempt to obtain knowledge of the hygrothermal properties of sea grass as thermal insulation, experiments have been carried out in the laboratory to determine the thermal conductivity, sorption properties and the water vapour permeability of the material. In order to investigate the hygro......In the attempt to obtain knowledge of the hygrothermal properties of sea grass as thermal insulation, experiments have been carried out in the laboratory to determine the thermal conductivity, sorption properties and the water vapour permeability of the material. In order to investigate...

  16. Electronic transport properties of nanostructured MnSi-films

    Science.gov (United States)

    Schroeter, D.; Steinki, N.; Scarioni, A. Fernández; Schumacher, H. W.; Süllow, S.; Menzel, D.

    2018-05-01

    MnSi, which crystallizes in the cubic B20 structure, shows intriguing magnetic properties involving the existence of skyrmions in the magnetic phase diagram. Bulk MnSi has been intensively investigated and thoroughly characterized, in contrast to MnSi thin film, which exhibits widely varying properties in particular with respect to electronic transport. In this situation, we have set out to reinvestigate the transport properties in MnSi thin films by means of studying nanostructure samples. In particular, Hall geometry nanostructures were produced to determine the intrinsic transport properties.

  17. Anomalous properties of technetium clusters

    International Nuclear Information System (INIS)

    Kryuchkov, S.V.

    1985-01-01

    On the basis of critical evaluation of literature data in the field of chemistry of technetium cluster compounds with ligands of a weak field a conclusion is made on specific, ''anomalous'' properties of technetium cluster complexes which consist in an increased ability of the given element to the formation of a series of binuclear and multinuclear clusters, similar in composition and structure and easily transforming in each other. The majority of technetium clusters unlike similar compounds of other elements are paramagnetic with one unpaired electron on ''metallic'' MO of loosening type. All theoretical conceptions known today on the electronic structure of technetium clusters are considered. It is pointed out, that the best results in the explanation of ''anomalous'' properties of technetium clusters can be obtained in the framework of nonempirical methods of self-consistent field taking into account configuration interactions. It is also shown, that certain properties of technetium clusters can be explained on the basis of qualitative model of Coulomb repulsion of metal atoms in clusters. The conclusion is made, that technetium position in the Periodic table, as well as recently detected technetium property to the decrease of effective charge on its atoms during M-M bond formation promote a high ability of the element to cluster formation both with weak field ligands and with strong field one

  18. Environmental indicators for evaluating properties

    Directory of Open Access Journals (Sweden)

    Mario Grosso

    2015-06-01

    Full Text Available Property evaluation for tax purposes has traditionally relied on urban and building criteria, mostly resulting from concepts driven by the commercial attractiveness of the property under evaluation, its building and the site itself. Due to the world climate and ecological crisis, awareness has risen about the need for other indicators, which can evaluate the quality of a property, even referring to its potential environmental impact. Technical standards for the evaluation of buildings’ environmental sustainability, which have been developed since the first years of this century, both nationally and internationally, take into account the impact of the building and its relevance for the life-cycle of materials and elements, with reference to the three sectors of sustainability: environmental, economic and social. The social sector includes indicators referring to the user’s health and comfort, which also interact with the morphological and spatial characteristics of the building. However, there is a lack of methodological tools for the evaluation of said indicators and existing ones are mainly of a qualitative type. This paper suggests a methodological approach for the quantitative evaluation of sustainability indicators, relying on the accessibility of a site’s climate resources by the property, as a criterion to evaluate the potential for the reduction of negative environmental impact, as well as a criterion to improve users’ life quality.

  19. Effects of a Chitosan Coating Layer on the Surface Properties and Barrier Properties of Kraft Paper

    Directory of Open Access Journals (Sweden)

    Shanhui Wang

    2016-01-01

    Full Text Available Biodegradable chitosan can be applied as a coating on the surface of kraft paper in order to improve its barrier properties against water vapor and air. The food packaging industry can benefit from the addition of chitosan to its current packaging, and in turn reduce pollution from plastic packaging plants. This paper discusses the film formation of chitosan, the permeability of paper coated with a chitosan layer, and the influence on the paper’s surface and barrier properties under different process conditions. SEM (scanning electron microscope, AFM (atomic force microscope, ATR-FTIR (Fourier transmission infrared spectroscope with attenuated total reflection, and PDA (penetration dynamics analysis were used to analyze the properties of chitosan’s film formation and permeability. A controlled experiment showed that the chitosan layer was smoother than the surface of the uncoated kraft paper, had better film formation, and that there was no chitosan penetration through the kraft paper. The barrier properties against water vapor were strongest when there was a higher concentration of chitosan solution at the optimum pH, stirring speed, and those with a thicker coating on the kraft paper.

  20. Financial development, property rights, and growth

    OpenAIRE

    Claessens, Stijn; Laeven, Luc

    2002-01-01

    The authors analyze how property rights affect the allocation of firms' available resources among different types of assets. In particular, they investigate empirically for a large number of countries whether firms in environments with more secure property rights allocate available resources more toward intangible assets and consequentially grow faster. The authors find that improved asset...

  1. Approximation properties of fine hyperbolic graphs

    Indian Academy of Sciences (India)

    2010 Mathematics Subject Classification. 46L07. 1. Introduction. Given a countable discrete group G, some nice approximation properties for the reduced. C∗-algebras C∗ r (G) can give us the approximation properties of G. For example, Lance. [7] proved that the nuclearity of C∗ r (G) is equivalent to the amenability of G; ...

  2. Mechanical Properties of Nylon Harp Strings

    Science.gov (United States)

    Lynch-Aird, Nicolas; Woodhouse, Jim

    2017-01-01

    Monofilament nylon strings with a range of diameters, commercially marketed as harp strings, have been tested to establish their long-term mechanical properties. Once a string had settled into a desired stress state, the Young’s modulus was measured by a variety of methods that probe different time-scales. The modulus was found to be a strong function of testing frequency and also a strong function of stress. Strings were also subjected to cyclical variations of temperature, allowing various thermal properties to be measured: the coefficient of linear thermal expansion and the thermal sensitivities of tuning, Young’s modulus and density. The results revealed that the particular strings tested are divided into two groups with very different properties: stress-strain behaviour differing by a factor of two and some parametric sensitivities even having the opposite sign. Within each group, correlation studies allowed simple functional fits to be found to the key properties, which have the potential to be used in automated tuning systems for harp strings. PMID:28772858

  3. Mechanical Properties of Nylon Harp Strings

    Directory of Open Access Journals (Sweden)

    Nicolas Lynch-Aird

    2017-05-01

    Full Text Available Monofilament nylon strings with a range of diameters, commercially marketed as harp strings, have been tested to establish their long-term mechanical properties. Once a string had settled into a desired stress state, the Young’s modulus was measured by a variety of methods that probe different time-scales. The modulus was found to be a strong function of testing frequency and also a strong function of stress. Strings were also subjected to cyclical variations of temperature, allowing various thermal properties to be measured: the coefficient of linear thermal expansion and the thermal sensitivities of tuning, Young’s modulus and density. The results revealed that the particular strings tested are divided into two groups with very different properties: stress-strain behaviour differing by a factor of two and some parametric sensitivities even having the opposite sign. Within each group, correlation studies allowed simple functional fits to be found to the key properties, which have the potential to be used in automated tuning systems for harp strings.

  4. Mechanical properties of nuclear waste glasses

    International Nuclear Information System (INIS)

    Connelly, A.J.; Hand, R.J.; Bingham, P.A.; Hyatt, N.C.

    2011-01-01

    The mechanical properties of nuclear waste glasses are important as they will determine the degree of cracking that may occur either on cooling or following a handling accident. Recent interest in the vitrification of intermediate level radioactive waste (ILW) as well as high level radioactive waste (HLW) has led to the development of new waste glass compositions that have not previously been characterised. Therefore the mechanical properties, including Young's modulus, Poisson's ratio, hardness, indentation fracture toughness and brittleness of a series of glasses designed to safely incorporate wet ILW have been investigated. The results are presented and compared with the equivalent properties of an inactive simulant of the current UK HLW glass and other nuclear waste glasses from the literature. The higher density glasses tend to have slightly lower hardness and indentation fracture toughness values and slightly higher brittleness values, however, it is shown that the variations in mechanical properties between these different glasses are limited, are well within the range of published values for nuclear waste glasses, and that the surveyed data for all radioactive waste glasses fall within relatively narrow range.

  5. Thermal and physical properties of bakery products.

    Science.gov (United States)

    Baik, O D; Marcotte, M; Sablani, S S; Castaigne, F

    2001-07-01

    This article reviews the measurement techniques, prediction models, and data on thermo-physical properties of bakery products: specific heat, thermal conductivity, thermal diffusivity, and density. Over the last decade, investigation has focused more on thermo-physical properties of nonbread bakery products. Both commonly used and new measurement techniques for thermo-physical properties reported in the publication are presented with directions for their proper use. Data and prediction models are tabulated for the range of moisture content and temperature of the bakery products.

  6. Nanostructured thin films and coatings functional properties

    CERN Document Server

    Zhang, Sam

    2010-01-01

    The second volume in ""The Handbook of Nanostructured Thin Films and Coatings"" set, this book focuses on functional properties, including optical, electronic, and electrical properties, as well as related devices and applications. It explores the large-scale fabrication of functional thin films with nanoarchitecture via chemical routes, the fabrication and characterization of SiC nanostructured/nanocomposite films, and low-dimensional nanocomposite fabrication and applications. The book also presents the properties of sol-gel-derived nanostructured thin films as well as silicon nanocrystals e

  7. CORRELATION BETWEEN INTELLECTUAL PROPERTY AND SCIENTIFIC ACTIVITY

    Directory of Open Access Journals (Sweden)

    Nataliia Shust

    2017-07-01

    Full Text Available Purpose: The article is dedicated to the analysis of legal nature and peculiarities of optimal correlation between the notions of intellectual property and scientific activity. Nowadays intellectual property as institution goes through the period of establishment in Ukraine. As the Soviet system of civil law was based on recognition and regulation of authors’ rights for the authors of scientific works, discoveries, inventions and innovation proposals as the ones having mainly relative, i.e. legally mandatory, but not absolute character.  Getting started to define the notion of intellectual property and intellectual property right in the system of interaction with scientific activity, it is important to say that such notion as “intellectual property” still needs enhancement. Its imperfection is due to the fact that this kind of property implies being formed by intellectual efforts of the author of scientific work, but legally it is processed with the help of documents that guarantee property right. Methods. General scientific method, philosophical method, specially-legal method of scientific research, system analysis method. Results: It is important to emphasize that not every result of scientific or creative work can become the object of intellectual property right, but the one that corresponds with law. Any scientific work falls within the purview of law if it corresponds with law demands. Scientific and technical results obtain legal protection only in case of appropriate qualification established by specific agency of State administration and issuement of law-enforcement document being limited by the territory of Ukraine. Protection of rights on the territory of other countries is realized only on the basis of correspondent international conventions and treaties. Discussion: Advanced modern countries realized the meaning and importance of usage and proper protection of creative and scientific work results known as

  8. Thermophysical properties of deep ocean sediments

    International Nuclear Information System (INIS)

    Hadley, G.R.; McVey, D.F.; Morin, R.

    1980-01-01

    Here we report measurements of the thermal conductivity and diffusivity of reconsolidated illite and smectite ocean sediments at a pore pressure of 600 bars and temperatures ranging from 25 to 420 0 C. The conductivity and diffusivity were found to be in the range of 0.8 to 1.0 W/m-K and 2.2 to 2.8 x 10 -7 m 2 /s, respectively. These data are consistent with a mixture model which predicts sediment thermal properties as a function of constituent properties and porosity. Comparison of pre- and post-test physical properties indicated a decrease in pore water content and an order of magnitude increase in shear strength and permeability

  9. Intellectual property and information controversy(I)

    Science.gov (United States)

    Aoyama, Hirokazu

    This paper deals with intellectual property as the results of various intellectual activities such as R & D, and intellectual proprietary rights which protect it. New technology, designs, literary works, computer programs, semiconductor chips, new plant breeding, brands, trading secrets, CI and others, and legislations which protect them are described. Then, the background of the fact that intellectual proprietary rights are emphasized as analyzed. The author points out items as follows; movement toward much larger size of R & D, generation of the areas to be newly protected, trend in enforcement of intellectual property protection, commercialization of intellectual property, trend in software evolution, movement in technological protectionism, and the present status on each item.

  10. Physical properties of liquid sodium

    International Nuclear Information System (INIS)

    Alberdi Primicia, J.; Martinez Piquer, T.A.

    1977-01-01

    The molten sodium has been the more accepted coolant for the first generation of FBR, by this reason the knowledge of its technology is needed for the development of the next LMFBR. A series of necessary data for designing sodium liquid systems are given. Tables and graphics about the most important physical sodium properties between 1200-1400 degC are gathered. The results have been obtained from equations that relate the properties with temperature using a Fortran IV program. (author) [es

  11. Structural relaxation: low temperature properties

    International Nuclear Information System (INIS)

    Cruz, F. de la

    1984-01-01

    We discuss the changes in transport and superconducting properties of amorphous Zr 70 Cu 30 , induced by thermal relaxation. The experimental results are used to investigate the relation between the microscopic parameters and the observed physical properties. It is shown that the density of eletronic states determines the shift Tc as well as the variation of the electrical resistivity. It is necessary to assume strong hybridization between s and d bands to understand the eletrodynamic response of the superconductor. (Author) [pt

  12. A study on creep properties of laminated rubber bearings. Pt. 1. Creep properties and numerical simulations of thick rubber bearings

    International Nuclear Information System (INIS)

    Matsuda, Akihiro; Yabana, Shuichi

    2000-01-01

    In this report, to evaluate creep properties and effects of creep deformation on mechanical properties of thick rubber bearings for three-dimensional isolation system, we show results of compression creep test for rubber bearings of various rubber materials and shapes and development of numerical simulation method. Creep properties of thick rubber bearings were obtained from compression creep tests. The creep strain shows steady creep that have logarithmic relationships between strain and time and accelerated creep that have linear relationships. We make numerical model of a rubber material with nonlinear viscoelastic constitutional equations. Mechanical properties after creep loading test are simulated with enough accuracy. (author)

  13. Nanoparticles in Polymers: Assembly, Rheology and Properties

    Science.gov (United States)

    Rao, Yuanqiao

    Inorganic nanoparticles have the potential of providing functionalities that are difficult to realize using organic materials; and nanocomposites is an effective mean to impart processibility and construct bulk materials with breakthrough properties. The dispersion and assembly of nanoparticles are critical to both processibility and properties of the resulting product. In this talk, we will discuss several methods to control the hierarchical structure of nanoparticles in polymers and resulting rheological, mechanical and optical properties. In one example, polymer-particle interaction and secondary microstructure were designed to provide a low viscosity composition comprising exfoliated high aspect ratio clay nanoparticles; in another example, the microstructure control through templates was shown to enable unique thermal mechanical and optical properties. Jeff Munro, Stephanie Potisek, Phillip Hustad; all of the Dow Chemical Company are co-authors.

  14. Lumber stress grades and design properties

    Science.gov (United States)

    David E. Kretschmann; David W. Green

    1999-01-01

    Lumber sawn from a log, regardless of species and size, is quite variable in mechanical properties. Pieces may differ in strength by several hundred percent. For simplicity and economy in use, pieces of lumber of similar mechanical properties are placed in categories called stress grades, which are characterized by (a) one or more sorting criteria, (b) a set of...

  15. Review of Particle Properties, 1982-1983

    CERN Document Server

    Particle Data Group. Berkeley; Porter, F C; Aguilar-Benítez, M; Montanet, Lucien; Walck, C; Crawford, R L; Kelly, Robert L; Rittenberg, Alan; Trippe, Thomas G; Wohl, Charles G; Yost, George P; Shimada, T; Losty, Michael J; Gopal, Gian P; Hendrick, R E; Shrock, R E; Frosch, R; Roper, L D; Armstrong, Betty

    1982-01-01

    This review of the properties of leptons, mesons, and baryons is an updating of Review of Particle Properties, Particle Data Group [Rev. Mod. Phys. 52 (1980) No. 2, Part II]. Data are evaluated, listed, averaged, and summarized in tables. Numerous tables, figures, and formulae of interest to particle physicists are also included. A data booklet is available.

  16. Magnetic properties of iron nanoparticle

    International Nuclear Information System (INIS)

    Carvell, J.; Ayieta, E.; Gavrin, A.; Cheng, Ruihua; Shah, V. R.; Sokol, P.

    2010-01-01

    Magnetic properties of Fe nanoparticles with different sizes synthesized by a physical deposition technique have been investigated experimentally. We have used a high pressure sputtering technique to deposit iron nanoparticles on a silicon substrate. The nanoparticles are then analyzed using atomic force microscopy (AFM), transmission electron microscopy (TEM), and superconducting quantum interference device techniques. TEM and AFM data show that the particle size could be tuned by adjusting the deposition conditions. The magnetic properties have been investigated from temperature dependent magnetization M(T) and field dependent magnetization M(H) measurements. The results show that two phases including both ferromagnetic and superparamagnetic particles are present in our system. From these data we extracted the superparamagnetic critical size to be 9 nm for our samples. Ferromagnetic particles are single magnetic domain particles and the magnetic properties can be explained by the Stoner and Wohlfarth model. For the superparamagnetic phase, the effective anisotropy constant, K eff , decreases as the particle size increases.

  17. Thermal Properties of Matter

    Science.gov (United States)

    Khachan, Joe

    2018-02-01

    The ancient Greeks believed that all matter was composed of four elements: earth, water, air, and fire. By a remarkable coincidence (or perhaps not), today we know that there are four states of matter: solids (e.g. earth), liquids (e.g. water), gasses (e.g. air) and plasma (e.g. ionized gas produced by fire). The plasma state is beyond the scope of this book and we will only look at the first three states. Although on the microscopic level all matter is made from atoms or molecules, everyday experience tells us that the three states have very different properties. The aim of this book is to examine some of these properties and the underlying physics.

  18. Human papilloma virus infection and cervical dysplasia.

    Science.gov (United States)

    Melinte-Popescu, Alina; Costăchescu, Gh

    2012-01-01

    Pap testing is considered to be the best screening tool for cervical cancer but there is currently great interest in the possible application of human papilloma virus (HPV) testing to supplement Pap screening for cervical cancer. To determine the prevalence of high-risk HPV types in the studied population and to explore the association between high-risk HPV types and cervical dysplasia. Cross-sectional study conducted at the Iasi Cuza Voda Obstetrics-Gynecology Hospital and Suceava County Hospital. 332 women who underwent colposcopy for cervical lesions between 2006 and 2011 were included in this study. The overall prevalence of HPV was 57.23%. HPV prevalence differs significantly in the three age groups up to 50 years. It was highest in patients below the age of 40 and progressively lower with advancing age. The overall prevalence of cervical dysplasia was 56.62%. The prevalence of cervical dysplasia was highest in the age groups up to 40 years. The most important determinant of HPV infection is age. Persistence of HPV appears to be associated with progression to squamous intraepithelial lesion. Dysplasia is often missed in a cervical sample either because of human error in screening and interpretation, or because of suboptimal quality of Pap smear. Incorporation of HPV testing into the present Pap screening program has the potential of making screening for cervical cancer more effective, and a necessary prelude to assessing this is by determining the prevalence of the high-risk types.

  19. Čisti život

    Directory of Open Access Journals (Sweden)

    Sanja Cimer

    2016-06-01

    Full Text Available Ne, kažem.Znam, kad kažem „ne“, to je to s nama, čist račun, rekli smo, karte na stolu, vino, keksi, humor – presuhi; klima, poljupci, zemlja za cvijeće – prevlažni. Dogovori umjesto sapunica kao kod drugih. Ne gubimo vrijeme na stvari koje nikoga ne zanimaju, čak ih ni na televiziji ne gledamo, nemamo televizor, imamo pametnijeg posla, i zabavljamo se jer znamo da se svijet ne može spasiti, mi smo spašeni samo privremeno, vremena je malo i nikada ne bismo skočili, ali osjećali smo se tako živima dok su nam se noge klatile preko ograde na terasi zgrade. Gledala sam vrhove svojih tenisica, stražnja svjetla automobila koji su se tamo dolje redali jedan za drugim poput crvenih mrava, gurali se u kolonama kroz uske ulice, noge mi još nikada nisu djelovale toliko kratko.Kao na moru na madracu na napuhavanje, rekla sam i ugrizla se za jezik, koji je viski razvezao jer nisi izgledao kao da imaš madrac na napuhavanje.Samo te voda nosi kad padneš, objasnio si, zrak te ne nosi, a ipak si bio tako siguran u sebe, nikad nisi pogledao dolje, nikad se osvrnuo da pogledaš zabavu koju ostavljaš za sobom, nisi ništa propustio niti se ičega bojao, pa ni neoprezna tapšanja po leđima.

  20. Nanomechanical properties of single amyloid fibrils

    International Nuclear Information System (INIS)

    Sweers, K K M; Bennink, M L; Subramaniam, V

    2012-01-01

    Amyloid fibrils are traditionally associated with neurodegenerative diseases like Alzheimer’s disease, Parkinson’s disease or Creutzfeldt-Jakob disease. However, the ability to form amyloid fibrils appears to be a more generic property of proteins. While disease-related, or pathological, amyloid fibrils are relevant for understanding the pathology and course of the disease, functional amyloids are involved, for example, in the exceptionally strong adhesive properties of natural adhesives. Amyloid fibrils are thus becoming increasingly interesting as versatile nanobiomaterials for applications in biotechnology. In the last decade a number of studies have reported on the intriguing mechanical characteristics of amyloid fibrils. In most of these studies atomic force microscopy (AFM) and atomic force spectroscopy play a central role. AFM techniques make it possible to probe, at nanometer length scales, and with exquisite control over the applied forces, biological samples in different environmental conditions. In this review we describe the different AFM techniques used for probing mechanical properties of single amyloid fibrils on the nanoscale. An overview is given of the existing mechanical studies on amyloid. We discuss the difficulties encountered with respect to the small fibril sizes and polymorphic behavior of amyloid fibrils. In particular, the different conformational packing of monomers within the fibrils leads to a heterogeneity in mechanical properties. We conclude with a brief outlook on how our knowledge of these mechanical properties of the amyloid fibrils can be exploited in the construction of nanomaterials from amyloid fibrils. (topical review)

  1. Functional Properties of Microorganisms in Fermented Foods

    Directory of Open Access Journals (Sweden)

    Jyoti Prakash Tamang

    2016-04-01

    Full Text Available Fermented foods have unique functional properties imparting some health benefits to consumers due to presence of functional microorganisms, which possess probiotics properties, antimicrobial, antioxidant, peptide production, etc. Health benefits of some global fermented foods are synthesis of nutrients, prevention of cardiovascular disease, prevention of cancer, gastrointestinal disorders, allergic reactions, diabetes, among others. The present paper is aimed to review the information on some functional properties of the microorganisms associated with fermented foods and beverages, and their health-promoting benefits to consumers.

  2. Structure and Properties of Compressed Borate Glasses

    DEFF Research Database (Denmark)

    Smedskjær, Morten Mattrup; Bauer, U.; Behrens, H.

    While the influence of thermal history on the structure and properties of glasses has been thoroughly studied in the past century, the influence of pressure history has received considerably less attention. In this study, we investigate the pressure-induced changes in structure and properties in ......, hardness and crack formation from nanoindentation experiments, and overshoot in isobaric heat capacity from DSC experiments at ambient pressure. The influence of the initial boron speciation on the degree of changes in structure and properties will also be discussed....

  3. Variability of mechanical properties of nuclear pressure vessel steels

    International Nuclear Information System (INIS)

    Petrequin, P.; Soulat, P.

    1980-01-01

    Causes of variability of mechanical properties nuclear pressure vessel steels are reviewed and discussed. The effects of product shape and size, processing history and heat treatment are investigated. Some quantitative informations are given on the scatter of mechanical properties of typical pressure vessel components. The necessity of using recommended or standardized properties for comparing mechanical properties before and after irradiation in pin pointed. (orig.) [de

  4. Carbon filter property detection with thermal neutron technique

    International Nuclear Information System (INIS)

    Deng Zhongbo; Han Jun; Li Wenjie

    2003-01-01

    The paper discussed the mechanism that the antigas property of the carbon filter will decrease because of its carbon bed absorbing water from the air while the carbon filter is being stored, and introduced the principle and method of detection the amount of water absorption with thermal neutron technique. Because some certain relation between the antigas property of the carbon filter and the amount of water absorption exists, the decrease degree of the carbon filter antigas property can be estimated through the amount of water absorption, offering a practicable facility technical pathway to quickly non-destructively detect the carbon filter antigas property

  5. Comparing optical properties of different species of diatoms

    DEFF Research Database (Denmark)

    Maibohm, Christian; Friis, Søren Michael Mørk; Su, Y.

    2015-01-01

    species dependent with huge variety in size, shape, and micro- structure. We have experimentally investigated optical properties of frustules of several species of diatoms to further understand light harvesting properties together with commo n traits, effects and differences between the different...... analysis software. The software uses parameters which are extracted from experimental im ages as basis for simulation and allows us to extract the influence of the different elements of the frustule. The information could be used both for predicting optical properties of diatoms and by changing frustule...... parameters, maybe by altering growth conditions of the diatoms tailor their optical properties....

  6. Properties of Whey-Protein-Coated Films and Laminates as Novel Recyclable Food Packaging Materials with Excellent Barrier Properties

    Directory of Open Access Journals (Sweden)

    Markus Schmid

    2012-01-01

    Full Text Available In case of food packaging applications, high oxygen and water vapour barriers are the prerequisite conditions for preserving the quality of the products throughout their whole lifecycle. Currently available polymers and/or biopolymer films are mostly used in combination with barrier materials derived from oil based plastics or aluminium to enhance their low barrier properties. In order to replace these non-renewable materials, current research efforts are focused on the development of sustainable coatings, while maintaining the functional properties of the resulting packaging materials. This article provides an introduction to food packaging requirements, highlights prior art on the use of whey-based coatings for their barriers properties, and describes the key properties of an innovative packaging multilayer material that includes a whey-based layer. The developed whey protein formulations had excellent barrier properties almost comparable to the ethylene vinyl alcohol copolymers (EVOH barrier layer conventionally used in food packaging composites, with an oxygen barrier (OTR of <2 [cm³(STP/(m²d bar] when normalized to a thickness of 100 μm. Further requirements of the barrier layer are good adhesion to the substrate and sufficient flexibility to withstand mechanical load while preventing delamination and/or brittle fracture. Whey-protein-based coatings have successfully met these functional and mechanical requirements.

  7. Property taxes and economic development. An approach to the relationship between property taxes and the investment of Antioquia's municipalities

    Directory of Open Access Journals (Sweden)

    Santiago Tobón Zapata

    2013-06-01

    Full Text Available This paper discusses the relationship between the levels of investment in health and education made by the municipalities and the collection of property taxes. A data panel methodology was used with a sample of 97 municipalities in the department of Antioquia (Colombia for the period 2000 - 2008. According to the results, it is possible to conclude that there is no relationship between the levels of autonomous investment in education and the collection of property taxes. On the other hand, in relation to health investments, a negative relationship was found between property tax collection and autonomous investment in health. Finally, in addition to the initial scope proposed, a positive relationship was shown between the collection of property taxes and investments in the development of roads and infrastructure.

  8. Property and Human Genetic Information

    DEFF Research Database (Denmark)

    Nielsen, Morten Ebbe Juul; Kongsholm, Nana Cecilie Halmsted; Schovsbo, Jens Hemmingsen

    2018-01-01

    Do donors (of samples from which genetic information is derived) have some sort of pre-legal (moral) or legal property right to that information? In this paper, we address this question from both a moral philosophical and a legal point of view. We argue that philosophical theories about property do...... innovation in society. A balancing of interest must take place and we have to make sure that patent protection serves general societal interests and not just those of special interest groups be that inventors or donors....

  9. Prediction of thermo-physical properties of liquid formulated products

    DEFF Research Database (Denmark)

    Mattei, Michele; Conte, Elisa; Kontogeorgis, Georgios

    2013-01-01

    The objective of this chapter is to give an overview of the models, methods and tools that may be used for the estimation of liquid formulated products. First a classification of the products is given and the thermo-physical properties needed to represent their functions are listed. For each...... property, a collection of the available models are presented according to the property type and the model type. It should be noted, however, that the property models considered or highlighted in this chapter are only examples and are not necessarily the best and most accurate for the corresponding property....

  10. Industrial nuclear property

    International Nuclear Information System (INIS)

    Lepetre, M.

    1976-01-01

    The first requests for patents for the use of nuclear power filed in France in 1939. This paper reviews the regulations on industrial nuclear property in various countries. The patenting system in several socialist countries is characterized by the fact that inventions on the production and use of radioactive materials may not be patented. This equally applies in India. In the United States, this type of invention may be patented except for those involving military uses and which must be notified to the federal authorities. In France, all industrial nuclear property is grouped under the same body, Brevatome, created in 1958, which enables the allocation of rights to be negotiated between the different interested parties, the Atomic Energy Commission (CEA), Electricite de France (EDF) and private industry. Under the Euratom Treaty, all inventions, even those governed by secrecy in Member countries, must be communicated to the Commission of the European Communities. (NEA) [fr

  11. Fuel properties to enable lifted-flame combustion

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Eric [Ford Motor Company, Dearborn, MI (United States)

    2015-03-15

    The Fuel Properties to Enable Lifted-Flame Combustion project responded directly to solicitation DE-FOA-0000239 AOI 1A, Fuels and Lubricants for Advanced Combustion Regimes. This subtopic was intended to encompass clean and highly-efficient, liquid-fueled combustion engines to achieve extremely low engine-out nitrogen oxides (NOx) and particulate matter (PM) as a target and similar efficiency as state-of-the-art direct injection diesel engines. The intent of this project was to identify how fuel properties can be used to achieve controllable Leaner Lifted Flame Combustion (LLFC) with low NOx and PM emissions. Specifically, this project was expected to identify and test key fuel properties to enable LLFC and their compatibility with current fuel systems and to enhance combustion models to capture the effect of fuel properties on advanced combustion. Successful demonstration of LLFC may reduce the need for after treatment devices, thereby reducing costs and improving thermal efficiency. The project team consisted of key technical personnel from Ford Motor Company (FMC), the University of Wisconsin-Madison (UW), Sandia National Laboratories (SNL) and Lawrence Livermore National Laboratories (LLNL). Each partner had key roles in achieving project objectives. FMC investigated fuel properties relating to LLFC and sooting tendency. Together, FMC and UW developed and integrated 3D combustion models to capture fuel property combustion effects. FMC used these modeling results to develop a combustion system and define fuel properties to support a single-cylinder demonstration of fuel-enabled LLFC. UW investigated modeling the flame characteristics and emissions behavior of different fuels, including those with different cetane number and oxygen content. SNL led spray combustion experiments to quantify the effect of key fuel properties on combustion characteristics critical for LLFC, as well as single cylinder optical engine experiments to improve fundamental

  12. Neuronal Differentiation Modulated by Polymeric Membrane Properties.

    Science.gov (United States)

    Morelli, Sabrina; Piscioneri, Antonella; Drioli, Enrico; De Bartolo, Loredana

    2017-01-01

    In this study, different collagen-blend membranes were successfully constructed by blending collagen with chitosan (CHT) or poly(lactic-co-glycolic acid) (PLGA) to enhance their properties and thus create new biofunctional materials with great potential use for neuronal tissue engineering and regeneration. Collagen blending strongly affected membrane properties in the following ways: (i) it improved the surface hydrophilicity of both pure CHT and PLGA membranes, (ii) it reduced the stiffness of CHT membranes, but (iii) it did not modify the good mechanical properties of PLGA membranes. Then, we investigated the effect of the different collagen concentrations on the neuronal behavior of the membranes developed. Morphological observations, immunocytochemistry, and morphometric measures demonstrated that the membranes developed, especially CHT/Col30, PLGA, and PLGA/Col1, provided suitable microenvironments for neuronal growth owing to their enhanced properties. The most consistent neuronal differentiation was obtained in neurons cultured on PLGA-based membranes, where a well-developed neuronal network was achieved due to their improved mechanical properties. Our findings suggest that tensile strength and elongation at break are key material parameters that have potential influence on both axonal elongation and neuronal structure and organization, which are of fundamental importance for the maintenance of efficient neuronal growth. Hence, our study has provided new insights regarding the effects of membrane mechanical properties on neuronal behavior, and thus it may help to design and improve novel instructive biomaterials for neuronal tissue engineering. © 2017 S. Karger AG, Basel.

  13. Mechanical properties of canine osteosarcoma-affected antebrachia.

    Science.gov (United States)

    Steffey, Michele A; Garcia, Tanya C; Daniel, Leticia; Zwingenberger, Allison L; Stover, Susan M

    2017-05-01

    To determine the influence of neoplasia on the biomechanical properties of canine antebrachia. Ex vivo biomechanical study. Osteosarcoma (OSA)-affected canine antebrachia (n = 12) and unaffected canine antebrachia (n = 9). Antebrachia were compressed in axial loading until failure. A load-deformation curve was used to acquire the structural mechanical properties of neoplastic and unaffected specimens. Structural properties and properties normalized by body weight (BW) and radius length were compared using analysis of variance (ANOVA). Modes of failure were compared descriptively. Neoplastic antebrachia fractured at, or adjacent to, the OSA in the distal radial diaphysis. Unaffected antebrachia failed via mid-diaphyseal radial fractures with a transverse cranial component and an oblique caudal component. Structural mechanical properties were more variable in neoplastic antebrachia than unaffected antebrachia, which was partially attributable to differences in bone geometry related to dog size. When normalized by dog BW and radial length, strength, stiffness, and energy to yield and failure, were lower in neoplastic antebrachia than in unaffected antebrachia. OSA of the distal radial metaphysis in dogs presented for limb amputation markedly compromises the structural integrity of affected antebrachia. However, biomechanical properties of affected bones was sufficient for weight-bearing, as none of the neoplastic antebrachia fractured before amputation. The behavior of tumor invaded bone under cyclic loading warrants further investigations to evaluate the viability of in situ therapies for bone tumors in dogs. © 2017 The American College of Veterinary Surgeons.

  14. Microstructure and Properties of Polypropylene/Carbon Nanotube Nanocomposites

    Directory of Open Access Journals (Sweden)

    Dimitrios Bikiaris

    2010-04-01

    Full Text Available In the last few years, great attention has been paid to the preparation of polypropylene (PP nanocomposites using carbon nanotubes (CNTs due to the tremendous enhancement of the mechanical, thermal, electrical, optical and structural properties of the pristine material. This is due to the unique combination of structural, mechanical, electrical, and thermal transport properties of CNTs. However, it is well-known that the properties of polymer-based nanocomposites strongly depend on the dispersion of nanofillers and almost all the discussed properties of PP/CNTs nanocomposites are strongly related to their microstructure. PP/CNTs nanocomposites were, mainly, prepared by melt mixing and in situ polymerization. Young’s modulus, tensile strength and storage modulus of the PP/CNTs nanocomposites can be increased with increasing CNTs content due to the reinforcement effect of CNTs inside the polymer matrix. However, above a certain CNTs content the mechanical properties are reduced due to the CNTs agglomeration. The microstructure of nanocomposites has been studied mainly by SEM and TEM techniques. Furthermore, it was found that CNTs can act as nucleating agents promoting the crystallization rates of PP and the addition of CNTs enhances all other physical properties of PP. The aim of this paper is to provide a comprehensive review of the existing literature related to PP/CNTs nanocomposite preparation methods and properties studies.

  15. Structure and properties of interfaces in ceramics

    International Nuclear Information System (INIS)

    Bonnell, D.; Ruehle, M.; Chowdhry, U.

    1995-01-01

    The motivation for the symposium was the observation that interfaces in crystallographically and compositionally complex systems often dictate the performance and reliability of devices that utilize functional ceramics. The current level of understanding of interface-property relations in silicon-based devices required over 30 years of intensive research. Similar issues influence the relationship between atomic bonding at interfaces and properties in functional ceramic systems. The current understanding of these complex interfaces does not allow correlation between atomic structure and interface properties, in spite of their importance to a number of emerging technologies (wireless communications, radar-based positioning systems, sensors, etc.). The objective of this symposium was to focus attention on these fundamental issues by featuring recent theoretical and experimental work from various disciplines that impact the understanding of interface chemistry, structure, and properties. The emphasis was on relating properties of surfaces and interfaces to structure through an understanding of atomic level phenomena. Interfaces of interest include metal/ceramic, ceramic/ceramic, ceramic/vapor, etc., in electronic, magnetic, optical, ferroelectric, piezoelectric, and dielectric applications. Sixty one papers have been processed separately for inclusion on the data base

  16. Property Modelling for Applications in Chemical Product and Process Design

    DEFF Research Database (Denmark)

    Gani, Rafiqul

    such as database, property model library, model parameter regression, and, property-model based product-process design will be presented. The database contains pure component and mixture data for a wide range of organic chemicals. The property models are based on the combined group contribution and atom...... is missing, the atom connectivity based model is employed to predict the missing group interaction. In this way, a wide application range of the property modeling tool is ensured. Based on the property models, targeted computer-aided techniques have been developed for design and analysis of organic chemicals......, polymers, mixtures as well as separation processes. The presentation will highlight the framework (ICAS software) for property modeling, the property models and issues such as prediction accuracy, flexibility, maintenance and updating of the database. Also, application issues related to the use of property...

  17. Valuation of Geothermal Wells on Real Property

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin

    2001-12-01

    The Geo-Heat Center is often contacted by individual property owners, real estate professionals and others for assistance in the evaluation of geothermal resources in real property transactions. This document is a summary of information on the methods we have suggested to approach this situation in the past. The first of these methods is employed in situations in which the geothermal resource is in use serving some application. The second approach is for situations in which there is a known well on the property but it is not currently in use. The information presented here does not address situations in which the property is underlain by suspected geothermal resources for which there is no surface manifestation or existing development. The information contained in this document is intended to address large capacity wells of the type that would be used for commercial geothermal applications.

  18. Database for waste glass composition and properties

    International Nuclear Information System (INIS)

    Peters, R.D.; Chapman, C.C.; Mendel, J.E.; Williams, C.G.

    1993-09-01

    A database of waste glass composition and properties, called PNL Waste Glass Database, has been developed. The source of data is published literature and files from projects funded by the US Department of Energy. The glass data have been organized into categories and corresponding data files have been prepared. These categories are glass chemical composition, thermal properties, leaching data, waste composition, glass radionuclide composition and crystallinity data. The data files are compatible with commercial database software. Glass compositions are linked to properties across the various files using a unique glass code. Programs have been written in database software language to permit searches and retrievals of data. The database provides easy access to the vast quantities of glass compositions and properties that have been studied. It will be a tool for researchers and others investigating vitrification and glass waste forms

  19. Dispersion properties of photonic crystal fibres

    DEFF Research Database (Denmark)

    Bjarklev, Anders Overgaard; Broeng, Jes; Dridi, Kim

    1998-01-01

    Approximate dispersion and bending properties of all-silica two-dimensional photonic crystal fibres are characterised by the combination of an effective-index model and classical analysis tools for optical fibres. We believe for the first time to have predicted the dispersion properties of photonic...... crystal fibres. The results strongly indicate that these fibres have potential applications as dispersion managing components...

  20. Important physical properties of peat materials

    Science.gov (United States)

    D.H. Boelter

    1968-01-01

    Peat materials from 12 bogs in northern Minnesota, U.S.A., showed significant differences in physical properties. It is pointed out that 1) these properties can be related to the hydrology of organic soils only if the soils represent undisturbed field conditions, and 2) volumetric expressions of water content are necessary to correctly evaluate the amount of water in a...

  1. Properties of spatial Cox process models

    DEFF Research Database (Denmark)

    Møller, Jesper

    Probabilistic properties of Cox processes of relevance for statistical modelling and inference are studied. Particularly, we study the most important classes of Cox processes, including log Gaussian Cox processes, shot noise Cox processes, and permanent Cox processes. We consider moment properties...... and point process operations such as thinning, displacements, and superpositioning. We also discuss how to simulate specific Cox processes....

  2. Multivariate statistical assessment of coal properties

    Czech Academy of Sciences Publication Activity Database

    Klika, Z.; Serenčíšová, J.; Kožušníková, Alena; Kolomazník, I.; Študentová, S.; Vontorová, J.

    2014-01-01

    Roč. 128, č. 128 (2014), s. 119-127 ISSN 0378-3820 R&D Projects: GA MŠk ED2.1.00/03.0082 Institutional support: RVO:68145535 Keywords : coal properties * structural,chemical and petrographical properties * multivariate statistics Subject RIV: DH - Mining, incl. Coal Mining Impact factor: 3.352, year: 2014 http://dx.doi.org/10.1016/j.fuproc.2014.06.029

  3. Quantum optical properties in plasmonic systems

    Energy Technology Data Exchange (ETDEWEB)

    Ooi, C. H. Raymond [Department of Physics, University of Malaya, 50603, Kuala Lumpur (Malaysia)

    2015-04-24

    Plasmonic metallic particle (MP) can affect the optical properties of a quantum system (QS) in a remarkable way. We develop a general quantum nonlinear formalism with exact vectorial description for the scattered photons by the QS. The formalism enables us to study the variations of the dielectric function and photon spectrum of the QS with the particle distance between QS and MP, exciting laser direction, polarization and phase in the presence of surface plasmon resonance (SPR) in the MP. The quantum formalism also serves as a powerful tool for studying the effects of these parameters on the nonclassical properties of the scattered photons. The plasmonic effect of nanoparticles has promising possibilities as it provides a new way for manipulating quantum optical properties of light in nanophotonic systems.

  4. Effect of organically modified clay on mechanical properties, cytotoxicity and bactericidal properties of poly(ɛ-caprolactone) nanocomposites

    Science.gov (United States)

    Kumar, Sachin; Mishra, Anupam; Chatterjee, Kaushik

    2014-12-01

    The objective of this study was to evaluate the use of organically-modified clay nanoparticles in poly(ɛ-caprolactone) (PCL) for developing biodegradable composites. PCL nanocomposites reinforced with two different types of organically-modified clay (Cloisite 30B, C30B and Cloisite 93A, C93A) were prepared by melt-mixing. Morphology of PCL/clay nanocomposites characterized by scanning electron microscopy indicated good dispersion of nanoclay in the PCL matrix. Reinforcement of nanoclay in PCL enhanced mechanical properties without affecting thermal and degradation properties of PCL. Cytocompatibility of PCL/clay nanocomposites was studied using both osteoblasts and endothelial cells in vitro. Both composites (PCL/C30B and PCL/C93A) were cytotoxic with high toxicity observed for C30B even at low content of 1 wt %. The cytotoxicity was found to arise due to leachables from PCL/clay composites. Electrical conductivity measurements of aqueous media confirmed leaching of cationic surfactant from the PCL/clay composites PCL matrix. Both composites were found to be bactericidal but C30B was more effective than C93A. Taken together, it was observed that organically-modified nanoclay as fillers in PCL improves mechanical properties and imparts bactericidal properties but with increased risk of toxicity. These PCL/clay composites may be useful as stronger packaging material with antibacterial properties but are not suited as biomedical implants or for food packaging applications.

  5. Synthesis, microstructures and properties of {gamma}-aluminum oxynitride

    Energy Technology Data Exchange (ETDEWEB)

    Wang Xidong; Wang Fuming; Li Wenchao

    2003-02-15

    This paper deals with the synthesis, microstructures and properties of {gamma}-aluminum oxynitride (AlON). The thermodynamic properties of AlON were analyzed and the Gibbs energy of AlON with different compositions and temperatures were evaluated. Based on thermodynamic studies, AlON has been synthesized. The microstructures, mechanical properties and oxidation resistance of the synthetic AlON have been examined and discussed.

  6. Composition-Structure-Property Relationships in Boroaluminosilicate Glasses

    DEFF Research Database (Denmark)

    Zheng, Qiuju; Potuzak, M.; Mauro, J.C.

    2012-01-01

    boroaluminosilicate glasses from peralkaline to peraluminous compositions by substituting Al2O3 for SiO2. Our results reveal a pronounced change in all the measured physical properties (density, elastic moduli, hardness, glass transition temperature, and liquid fragility) around [Al2O3]–[Na2O]=0. The structural......The complicated structural speciation in boroaluminosilicate glasses leads to a mixed network former effect yielding nonlinear variation in many macroscopic properties as a function of chemical composition. Here we study the composition–structure–property relationships in a series of sodium...

  7. Composition-structure-property relation of oxide glasses

    DEFF Research Database (Denmark)

    Hermansen, Christian

    also increases such properties. Yet, these rules are not strictly followed even for the simplest binary oxide glasses, such as alkali silicates, borates and phosphates. In this thesis it is argued that the missing link between composition and properties is the glass structure. Structural models...... are proposed based on topological selection rules and experimentally verified. The relation between structure and properties is evaluated using topological constraint theory, which in its essence is a theory that quantifies the two intuitions of the glass scientist. The end result is a quantitative model...

  8. Production and antimicrobial property of glycolipid biosurfactants

    Science.gov (United States)

    Microbial glycolipids such as rhamnolipid (RL) and sophorolipid (SL) are an important class of biosurfactants with excellent surface tension-lowering activity. Besides their surfactant- and environment-friendly properties, however, additional value-added property such as bacteriocidal activity is n...

  9. Mechanical Properties of Composite Materials

    Directory of Open Access Journals (Sweden)

    Mitsuhiro Okayasu

    2014-10-01

    Full Text Available An examination has been made of the mechanical and failure properties of several composite materials, such as a short and a long carbon fiber reinforced plastic (short- and long-CFRP and metal based composite material. The short CFRP materials were used for a recycled CFRP which fabricated by the following process: the CFRP, consisting of epoxy resin with carbon fiber, is injected to a rectangular plate cavity after mixing with acrylonitrile butadiene styrene resin with different weight fractions of CFRP. The fatigue and ultimate tensile strength (UTS increased with increasing CFRP content. These correlations, however, break down, especially for tensile strength, as the CFPR content becomes more than 70%. Influence of sample temperature on the bending strength of the long-CFRP was investigated, and it appears that the strength slightly degreases with increasing the temperature, due to the weakness in the matrix. Broken fiber and pull-out or debonding between the fiber and matrix were related to the main failure of the short- and long-CFRP samples. Mechanical properties of metal based composite materials have been also investigated, where fiber-like high hardness CuAl2 structure is formed in aluminum matrix. Excellent mechanical properties were obtained in this alloy, e.g., the higher strength and the higher ductility, compared tothe same alloy without the fiber-like structure. There are strong anisotropic effects on the mechanical properties due to the fiber-like metal composite in a soft Al based matrix.

  10. Thermodynamic properties of xanthone: Heat capacities, phase-transition properties, and thermodynamic-consistency analyses using computational results

    International Nuclear Information System (INIS)

    Chirico, Robert D.; Kazakov, Andrei F.

    2015-01-01

    Highlights: • Heat capacities were measured for the temperature range (5 to 520) K. • The enthalpy of combustion was measured and the enthalpy of formation was derived. • Thermodynamic-consistency analysis resolved inconsistencies in literature enthalpies of sublimation. • An inconsistency in literature enthalpies of combustion was resolved. • Application of computational chemistry in consistency analysis was demonstrated successfully. - Abstract: Heat capacities and phase-transition properties for xanthone (IUPAC name 9H-xanthen-9-one and Chemical Abstracts registry number [90-47-1]) are reported for the temperature range 5 < T/K < 524. Statistical calculations were performed and thermodynamic properties for the ideal gas were derived based on molecular geometry optimization and vibrational frequencies calculated at the B3LYP/6-31+G(d,p) level of theory. These results are combined with sublimation pressures from the literature to allow critical evaluation of inconsistent enthalpies of sublimation for xanthone, also reported in the literature. Literature values for the enthalpy of combustion of xanthone are re-assessed, a revision is recommended for one result, and a new value for the enthalpy of formation of the ideal gas is derived. Comparisons with thermophysical properties reported in the literature are made for all other reported and derived properties, where possible

  11. The Spectroscopic and Conductive Properties of Ru(II Complexes with Potential Anticancer Properties

    Directory of Open Access Journals (Sweden)

    Adebayo A. Adeniyi

    2014-01-01

    Full Text Available Different density functional methods (DFT have been used to optimize and study the chemistry of five potential anticancer complexes in terms of their electronic, conductive, and spectroscopic properties. Many of the computed properties in addition to the IR and QTAIM analysis of the NMR are dipole moment vector (μi, linear polarizability tensor (αij, first hyperpolarizability tensors (βijk, polarizability exaltation index (Γ, and chemical hardness (η of the complexes. Stable low energy geometries are obtained using basis set with effective core potential (ECP approximation but, in the computation of atomic or molecular properties, the metal Ru atom is better treated with higher all electron basis set like DGDZVP. The spectroscopic features like the IR of the metal-ligand bonds and the isotropic NMR shielding tensor of the coordinated atoms are significantly influenced by the chemical environment of the participating atoms. The carboxylic and pyrazole units are found to significantly enhance the polarizabilities and hyperpolarizabilities of the complexes while the chloride only improves the polarity of the complexes. Fermi contacts (FC have the highest effect followed by the PSO among all the four Ramsey terms which defined the total spin-spin coupling constant J (HZ of these complexes.

  12. Thermophysical properties of selected wear-resistant alloys

    International Nuclear Information System (INIS)

    Farwick, D.G.; Johnson, R.N.

    1980-06-01

    Thermophysical properties of 13 selected wear-resistant materials, including specific heat, thermal conductivity, thermal diffusivity, and thermal expansion (instantaneous, mean, and linear) are provided. The Center for Information and Numerical Data Analysis and Synthesis (CINDAS) at Purdue University supplied properties data

  13. The strong reflecting property and Harrington's Principle

    OpenAIRE

    Cheng, Yong

    2015-01-01

    In this paper we characterize the strong reflecting property for $L$-cardinals for all $\\omega_n$, characterize Harrington's Principle $HP(L)$ and its generalization and discuss the relationship between the strong reflecting property for $L$-cardinals and Harrington's Principle $HP(L)$.

  14. Fundamentals of semiconductors physics and materials properties

    CERN Document Server

    Yu, Peter Y

    2005-01-01

    Provides detailed explanations of the electronic, vibrational, transport, and optical properties of semiconductors. This textbook emphasizes understanding the physical properties of Si and similar tetrahedrally coordinated semiconductors and features an extensive collection of tables of material parameters, figures, and problems.

  15. Competitive intelligence practice in the South African property sector

    Directory of Open Access Journals (Sweden)

    Tshilidzi E. Nenzhelele

    2016-08-01

    Full Text Available Background: The South African property sector contributes highly to creating jobs, skills development, poverty reduction and economic growth. Although South Africa dropped in the global competitiveness ranking, the property sector of South Africa remains very competitive. To survive in a competitive sector, firms around the world practice competitive intelligence(CI. Although the use of CI has been examined in other sectors in South Africa, no study on CI practice has been conducted in the property sector. Objectives: The objective of this research was to establish the extent to which the property sector of South Africa practices CI. Method: This research was quantitative in nature and a web-based questionnaire was used to collect data from estate agencies in the South African property sector. Results: The results indicate that the South African property sector is very competitive and estate agencies practice CI to gain competitive advantage and make quality decisions.Moreover, the results reveal that the property sector practice CI legally and ethically. The results indicate that the majority of estate agencies are very small employing at most five employees and make at most 5 million Rands annual turnover. Conclusion: The South African property sector ethically and legally practices CI to gain competitive advantage and to aid in making quality decisions.

  16. Properties of radiation cured coatings

    International Nuclear Information System (INIS)

    Larson, E.G.; Spencer, D.S.; Boettcher, T.E.; Melbauer, M.A.; Skarjune, R.P.

    1987-01-01

    Coatings were prepared from acrylate or methacrylate functionalized resins to study the effect of end group functionality on the physical properties of u.v. and electron beam cured coatings. Cure response was measured by solid state NMR and gel extraction, as expected, methacrylate resins cured much slower. Thermal Gravimetric Analysis (TGA) revealed acrylate coatings have greater thermal stability. Properties such as tensile strength and hardness showed little effect of end group functionality or curing method. The O 2 and H 2 O permeabilities of the coating were correlated with the processing conditions. (author)

  17. Abelian properties of Anick spaces

    CERN Document Server

    Gray, Brayton

    2017-01-01

    Anick spaces are closely connected with both EHP sequences and the study of torsion exponents. In addition they refine the secondary suspension and enter unstable periodicity. This work describes their H-space properties as well as universal properties. Techniques include a new kind on Whitehead product defined for maps out of co-H spaces, calculations in an additive category that lies between the unstable category and the stable category, and a controlled version of the extension theorem of Gray and Theriault (Geom. Topol. 14 (2010), no. 1, 243-275).

  18. Metal Additive Manufacturing: A Review of Mechanical Properties

    Science.gov (United States)

    Lewandowski, John J.; Seifi, Mohsen

    2016-07-01

    This article reviews published data on the mechanical properties of additively manufactured metallic materials. The additive manufacturing techniques utilized to generate samples covered in this review include powder bed fusion (e.g., EBM, SLM, DMLS) and directed energy deposition (e.g., LENS, EBF3). Although only a limited number of metallic alloy systems are currently available for additive manufacturing (e.g., Ti-6Al-4V, TiAl, stainless steel, Inconel 625/718, and Al-Si-10Mg), the bulk of the published mechanical properties information has been generated on Ti-6Al-4V. However, summary tables for published mechanical properties and/or key figures are included for each of the alloys listed above, grouped by the additive technique used to generate the data. Published values for mechanical properties obtained from hardness, tension/compression, fracture toughness, fatigue crack growth, and high cycle fatigue are included for as-built, heat-treated, and/or HIP conditions, when available. The effects of test orientation/build direction on properties, when available, are also provided, along with discussion of the potential source(s) (e.g., texture, microstructure changes, defects) of anisotropy in properties. Recommendations for additional work are also provided.

  19. Predicting structural properties of fluids by thermodynamic extrapolation

    Science.gov (United States)

    Mahynski, Nathan A.; Jiao, Sally; Hatch, Harold W.; Blanco, Marco A.; Shen, Vincent K.

    2018-05-01

    We describe a methodology for extrapolating the structural properties of multicomponent fluids from one thermodynamic state to another. These properties generally include features of a system that may be computed from an individual configuration such as radial distribution functions, cluster size distributions, or a polymer's radius of gyration. This approach is based on the principle of using fluctuations in a system's extensive thermodynamic variables, such as energy, to construct an appropriate Taylor series expansion for these structural properties in terms of intensive conjugate variables, such as temperature. Thus, one may extrapolate these properties from one state to another when the series is truncated to some finite order. We demonstrate this extrapolation for simple and coarse-grained fluids in both the canonical and grand canonical ensembles, in terms of both temperatures and the chemical potentials of different components. The results show that this method is able to reasonably approximate structural properties of such fluids over a broad range of conditions. Consequently, this methodology may be employed to increase the computational efficiency of molecular simulations used to measure the structural properties of certain fluid systems, especially those used in high-throughput or data-driven investigations.

  20. Special boundedness properties in numerical initial value problems

    KAUST Repository

    Hundsdorfer, W.

    2011-09-21

    For Runge-Kutta methods, linear multistep methods and other classes of general linear methods much attention has been paid in the literature to important nonlinear stability properties known as total-variation-diminishing (TVD), strong stability preserving (SSP) and monotonicity. Stepsize conditions guaranteeing these properties were studied by Shu and Osher (J. Comput. Phys. 77:439-471, 1988) and in numerous subsequent papers. Unfortunately, for many useful methods it has turned out that these properties do not hold. For this reason attention has been paid in the recent literature to the related and more general properties called total-variation-bounded (TVB) and boundedness. In the present paper we focus on stepsize conditions guaranteeing boundedness properties of a special type. These boundedness properties are optimal, and distinguish themselves also from earlier boundedness results by being relevant to sublinear functionals, discrete maximum principles and preservation of nonnegativity. Moreover, the corresponding stepsize conditions are more easily verified in practical situations than the conditions for general boundedness given thus far in the literature. The theoretical results are illustrated by application to the two-step Adams-Bashforth method and a class of two-stage multistep methods. © 2011 Springer Science + Business Media B.V.