WorldWideScience

Sample records for properties novye sverkhtyazhelye

  1. New Methods and Facilities for the Measurement of Physical Properties of Reactor Components and Irradiated Materials; Nouveaux Procedes et Instruments de Mesure des Proprietes Physiques des Elements de Reacteur et des Matieres Irradiees; Novye metody i sredstva izmereniya fizicheskikh s vojstv komponentov reaktora i obluchennykh materialov; Nuevos Metodos y Equipos para Medir Propiedades Fisicas de Componentes de Reactor y de Materiales Irradiados

    Energy Technology Data Exchange (ETDEWEB)

    Foerster, F.; Mueller, P. [Institut Dr. Foerster, Reutlingen, Federal Republic of Germany (Germany)

    1965-09-15

    An instrument for the fully automatic measurement and recording of Young's modulus and the shear modulus and the damping capacity as a function of temperature and time is shown. The measurement of Young's modulus is produced by exciting specimens of various sizes in their natural frequency. The measurement of damping capacity occurs by free decay of the vibration or by the measurement of the half width of the resonance curve. Examples are given for measurements of the recovery after radiation damage and after plastic deformation and for the degree of graphitation. The detection of defects and density variations in graphite bars is proven. Furthermore, a method of investigation of the fastening of UO{sub 2} pellets in thin-walled austenitic tubes is explained, A special oven for the investigation of the elastic and inelastic behaviour of ''hot'' specimens at temperatures between 20 and 2000 Degree-Sign C is shown. The quality control of non-ferrous metals by means of eddy-current measurement of the electrical conductivity is discussed. An instrument is shown for the contactless measurement of the electrical conductivity of non-ferrous metals. The correlation between the electrical conductivity and the stress-strain behaviour of non-ferrous metals and alloys is explained. Special attention is paid to the measurement of small-size test pieces. A device for remote direct measurement in the ''hot'' zone of the reactor is shown. The dependence of the electrical conductivity upon the radiation dose is discussed. An instrument for the measurement of the permeability, the remanence and the coercive force as a function of the mechanical stress and the elastic and plastic strain and of the radiation dose is explained. Measurements of the variation of magnetic properties as a function of elastic stress and plastic deformation are shown. The effects of irradiation on the permeability and the coercive force are discussed. An instrument is shown for the quick measurement and

  2. New counting circuits with E1T tubes; Nouveaux circuits de comptage a tubes E1T; Novye schetnye kontury s lampami E1T; Nuevos circuitos de contaje con valvulas E1T

    Energy Technology Data Exchange (ETDEWEB)

    Radeka, V [Institut Rudjer Boskovic, Zagreb, Yugoslavia (Croatia)

    1962-04-15

    continu non stabilise. (author) [Spanish] Se dan soluciones nuevas para circuitos deflectores de haz que permiten montar circuitos contadores sencillos y seguros. La precision con que tiene que ser desviado el haz es deducida por el autor partiendo de investigaciones teoricas del proceso de contaje publicadas anteriormente. Calcula la disminucion de los limites de error en la deflexion que resulta de la diferencia entre las caracteristicas real e ideal de la valvula. Se demuestra que el limite de error en la deflexion es maximo hasta unos 3x10{sup 5} impulsos por segundo, e independiente de la velocidad de contaje, por lo que es posible disenar circuitos mas simples. Para contar hasta 10{sup 6} impulsos por segundo, se requieren circuitos deflectores de mayor precision. La memoria describe dos circuitos que se pueden emplear hasta estos limites de velocidad de recuento. No es necesario que los componentes del circuito sean muy estables o muy exactos. Solamente se precisa una tension continua de alimentacion no estabilizada. (author) [Russian] Dayutsya novye resheniya dlya polucheniya otklonyayushchikh puchek luchej konturov, chto pozvolyaet osushchestvlyat' prostye i nadezhnye schetnye kontury. Trebovaniya tochnosti otkloneniya puchka luchej vyvedeny iz teoreticheskikh izyskanij schetnykh protsessov, opublikovannykh avtorom ranee. Podschityvaetsya umen'shenie predela pogreshnosti otkloneniya, vytekayushchej iz raznitsy mezhdu dejstvitel'noj i teoreticheskoj kharakteristikami ehlektronnoj lampy. Dokazyvaetsya, chto priblizitel'no okolo 3 x 10{sup 5} impul'sov v sekundu predel pogreshnosti otkloneniya dostigaet svoego maksimal'nogo znacheniya; on ne zavisit ot skorosti scheta, chto daet vozmozhnost' uprostit' konstruktsiyu konturov. Dlya otscheta do 10{sup 6} impul'sov v sekundu trebuyutsya bolee tochnye kontury otkloneniya. Opisyvayutsya dva kontura dlya ispol'zovaniya ikh do ehtikh predelov skorosti scheta. Trebovaniya, pred{sup y}avlyaemye k sostavnym chastyam kontura v

  3. New Frontiers for Non-Destructive Testing in the Nuclear Age; Perspectives des Essais Non Destructifs a l'Ere Nucleaire; ''Novye rubezhi'' nedestruktivnykh ispytanij v yadernyj vek; Nuevas Posibilidades de los Ensayos No Destructivos en la Era Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Ballard, D. W. [Sandia Laboratory Albuquerque, NM (United States)

    1965-10-15

    aplicarlas a la produccion si se quiere lograr un mayor nivel de seguridad en el empleo-del equipo nuclear. (author) [Russian] Posle vtoroj mirovoj vojny kolossal'no vozroslo chislo metodov nedestruktivnyh ispytanij chto mozhno v znachitel'noj stepeni ob'jasnit' tem, chto v jadernoj promyshlennosti pred{sup j}av- ljajutsja vse bolee strogie trebovanija k kachestvu i nadezhnosti oborudovanija. Slozhnost' sis- temy i obshhie rashody, svjazannye s povrezhdenijami, nastol'ko vozrosli, chto sushhestvuet na stojatel'naja neobhodimost' v razrabotke bolee jeffektivnyh metodov nedestruktivnyh ispy- tanij, a takzhe v ih ispol'zovanii na vsem protjazhenii proizvodstvennogo cikla. V nastojashhee vremja znachitel'no rasshirjajutsja vozmozhnosti primenenija horosho izvest- nyh metodov ispytanij, naprimer s pomoshh'ju radiografii, ul'trazvuka i jelektromagnitnyh kolebanij, dlja udovletvorenija vse vozrastajushhih trebovanij tehnicheskogo usovershenstvova- nija. Odnovremenno razrabatyvajutsja novye principy ispytanij special'no dlja togo , chto- by proverit' te trebovanija, kotorye pred{sup j}avljajutsja k staticheskim i dinamicheskim harakte- ristikam. Jeti bystrodejstvujushhie metody s vysokoj razreshajushhej sposobnost'ju, javljaju- shhiesja poistine ''novymi rubezhami'' nedestruktivnyh ispytanij, polozheny v osnovu nasto- jashhej raboty. V chislo novejshih metodov, kotorye rassmatrivajutsja v doklade, vhodit ispol'zovanie infrakrasnyh luchej dlja opredelenija prochnosti svarnyh soedinenij. Rassmatrivaetsja ispy- tanie struktur metodom kinoradiografii vo vremja vibracionnogo ispytanija s cel'ju izuche- nija ih dinamicheskogo povedenija. Drugoj oblast'ju, kotoraja imeet iskljuchitel'no vazhnoe zna- chenie dlja poluchenija nadezhnogo reaktornogo topliva, javljaetsja jeffektivnoe nahozhdenie mesta techi. Rassmatrivaetsja metod proverki zakljuchennyh v o''olochku komponentov, pri kotorom ispol'zuetsja radioaktivnyj gaz i kotoryj pozvoljaet izmerjat' skorosti utechki, sostavlja- jushhie 10

  4. New processing techniques for radioisotopes at Oak Ridge National Laboratory; Production de radioisotopes: nouvelles techniques employees au Laboratoire national d'Oak Ridge; Novye tekhnologicheskie metody polucheniya radioizotopov v Okridzhskoj natsional'noj laboratorii; Nuevos metodos de preparacion de radioisotopos aplicados en el Oak Ridge National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Butler, T A; Lamb, E; Rupp, A F [Oak Ridge National Laboratory, Oak Ridge, TN (United States)

    1962-01-15

    combinacion de procedimientos de precipitacion y de extraccion con disolventes, se han podido recuperar cantidades de tecnecio-99 del orden de algunos gramos, a partir de desechos de productos de fision. La pureza quimica del tecnecio obtenido es superior al 99,9%, en tanto que su pureza radioquimica sobrepasa el 99.99%. Trabajando tambien con vestigios, se ha demostrado la posibilidad de separar y purificar por extraccion continua pequenas cantidades de estroncio contenidas en otros materiales. Se obtuvo estroncio de 98% de pureza a partir de un material contaminado por un 95% de calcio inerte. El estroncio se transforma en titanato de estroncio, con el que se elaboran elementos ceramicos. (author) [Russian] Novejshaya progressivnaya programma proizvodstva radioizotopov v Okridzhskoj natsional'noj laboratorii vklyuchaet novye tekhnologicheskie protsessy i uluchsheniya ikh dlya proizvodstva tseriya-144, prometiya-147, tekhnetsiya-99 i strontsiya-90. TSerij-144 byl proizveden v kolichestve neskol'kikh kilokyuri pri probnoj postanovke proizvodstva. Produkt byl rekuperirovan bolee chem na 98 protsentov pri chistote produkta svyshe 99 protsentov. Posle ehtogo tserij byl obrabotan dlya polucheniya chistoj okisi tseriya-144 v vide poroshka s kontsentratsiej aktivnosti v 235 kyuri na gramm. Poroshok spressovyvalsya v tabletki, kotorye spekalis' v vide plotnogo keramicheskogo tela. Prometij-147 byl proizveden v kolichestve neskol'kikh kilokyuri po metodu osazhdeniya sovmestno s metodom ionnogo obmena. Dlya otdeleniya prometiya-147 ot drugikh redkikh zemel' byl isprobovan v masshtabe indikatorov metod izvlecheniya rastvoritelem. Iz produktov deleniya v stoke otkhodnykh materialov bylo rekuperirovano neskol'ko grammov tekhnetsiya-99 pri pomoshchi protsessa osazhdeniya sovmestno s protsessom izvlecheniya rastvoritelem. Tekhnetsij byl poluchen bolee chem s 99,9-protsentnoj khimicheskoj chistotoj i s radiokhimicheskoj chistotoj bolee chem 99,99%. V masshtabe indikatorov byla dokazana

  5. Property.

    Science.gov (United States)

    Piele, Philip K.

    Numerous cases in this year's chapter dealt with the same topics of previous years--contracts and bids for building construction, and detachment and annexation of a portion of a school district. The courts continued to attribute board discretionary authority to school boards in school property matters. Intergovernmental disputes over ownership or…

  6. Intellectual Property.

    Science.gov (United States)

    Swinson, John V.

    2000-01-01

    Intellectual property is a term that covers a number of different rights. Considers issues such as what are the basic forms of intellectual property; who owns the intellectual property created by a teacher; who owns intellectual property created by students; and use of downloaded materials from the internet. (Author/LM)

  7. Physical properties

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Research activities into the physical properties of metals and ceramics at Lawrence Berkeley Laboratory during 1976 are reported. Topics covered include: high field superconductivity; microstructure and mechanical behavior of ceramics, glass-metal, and ceramic-metal systems; high temperature reactions; relation of microstructure to properties in ceramics; and structure and properties of carbon materials and composite materials

  8. Elastic properties

    International Nuclear Information System (INIS)

    Ledbetter, H.M.

    1983-01-01

    This chapter investigates the following five aspects of engineering-material solid-state elastic constants: general properties, interrelationships, relationships to other physical properties, changes during cooling from ambient to near-zero temperature, and near-zero-temperature behavior. Topics considered include compressibility, bulk modulus, Young's modulus, shear modulus, Poisson's ratio, Hooke's law, elastic-constant measuring methods, thermodynamic potentials, higher-order energy terms, specific heat, thermal expansivity, magnetic materials, structural phase transitions, polymers, composites, textured aggregates, and other-phenomena correlations. Some of the conclusions concerning polycrystalline elastic properties and their temperature dependence are: elastic constants are physical, not mechanical, properties which relate thermodynamically to other physical properties such as specific heat and thermal expansivity; elastic constants at low temperatures are nearly temperature independent, as required by the third law of thermodynamics; and elastic constants can be used to study directional properties of materials, such as textured aggregates and composites

  9. Thermochemical properties

    International Nuclear Information System (INIS)

    Brewer, L.; Lamoreaux, R.H.; California Univ., Berkeley

    1980-01-01

    A critical review of thermodynamic properties of Mo-compounds is presented. Binary Mo-compounds, elemental Mo and binary Mo-alloys are considered. The thermodynamic properties include heat capacity enthalpy, gibbs free energy, entropy, vapor pressure, partial free energy of solution. Many values are given in the table form and some values are given in the text. The data used and the procedures applied to test the data are indicated in the text

  10. Thermophysical properties

    Energy Technology Data Exchange (ETDEWEB)

    Kayser, R.F.

    1993-01-01

    Numerous fluids have been identified as promising alternative refrigerants, but much of the information needed to predict their behavior as pure fluids and as components in mixtures does not exist. In particular, reliable thermophysical properties data and models are needed to predict the performance of the new refrigerants in heating and cooling equipment and to design and optimize equipment to be reliable and energy efficient. The objective of this project is to provide highly accurate, selected thermophysical properties data for Refrigerants 32, 123, 124, and 125, and to use these data to fit simple and complex equations of state and detailed transport property models. The new data will fill gaps in the existing data sets and resolve the problems and uncertainties that exist in and between the data sets. This report describes the progress made during the fourth quarter of this fifteen-month project, which was initiated in late January, 1992.

  11. Intellectual Property.

    Science.gov (United States)

    St. Clair, Gloriana

    1992-01-01

    Discusses issues of copyright and the transfer or use of intellectual property as they relate to librarians. Topics addressed include the purpose of copyright laws, financial losses to publishers from pirating, cultural views of pirating, the fair use doctrine, concerns of authors of scholarly materials, impact of increasing library automation and…

  12. luminescence properties

    Indian Academy of Sciences (India)

    1Faculty of Science and Arts, Department of Chemistry, Bozok University, Yozgat 66900, Turkey. 2Faculty of Science, Department of Chemistry, Erciyes ... synthesized by the conventional solid-state reaction method, their crystal structures and luminescence properties were investigated. X-ray diffraction patterns (XRD) ...

  13. School Property.

    Science.gov (United States)

    Piele, Philip K.; Forsberg, James R.

    The 1973 court cases relating to school property continued a trend toward litigating constitutional issues. For instance, a larger number of cases dealt with the relationship between the location and construction of school buildings and school desegregation plans. This chapter reviews the status and development of case law relating to school…

  14. Intellectual property

    Directory of Open Access Journals (Sweden)

    MSc. Shpresa Ibrahimi

    2012-06-01

    Full Text Available Montenue, a distinct French scholar of intellectual property, has suggested that IP is a “tool which surprisingly helps a lot”, and this definition on science, arts, culture, since the 16th century. Now, what would be the definition of intellectual property for the 21st century? Apparently not a “strange” tool, but a necessary tool, primary for enriching human knowledge, and for the new world order, especially in the global market sphere. Intellectual property is an integral part of international trade, and its importance keeps increasing, since effective use of knowledge is increasingly influencing the economic prosperity of peoples. One may say that there is little originality in the creative sphere. Naturally, this originality can only be reflected by individuality and human identity in intellectual creativity The author rights in the Kosovo legislation is a novelty, a necessity of developing a creative environment in the fields of science, arts and industrial property. First and foremost, the individual benefit, which is secured by the author as the creator of the work, is a moral and material right. Secondly, there is a need for harmonization, not only of values for the creator, but also for the development of science, culture, increased competitive advantage, and the public sphere, as a benefit for the public health and security, and the fiscal policy. The deficiency one must record is with the Office for Copy Rights, which is to play a strong role in implementing and protecting copy rights and other related rights by licensing collective management agencies, imposing administrative fines, awareness raising, provision of information, and other capacity building and educative measures. Naturally, the enactment of good legislation is a system without any meaning or sense if not associated with the court practice. Any establishment of a legal system not pursued with enforcement mechanisms remains only in legal frameworks.

  15. Valuation of Property.

    Science.gov (United States)

    Bodley, Joanne H.; Goodenough, Linda

    This report describes property tax revenues and assessment rates for all 50 States during 1966. The following information is summarized by State and by class of property: (1) The total valuation and the taxable valuation of property subject to local general property taxation and the percent distribution of total valuation by class of property; (2)…

  16. Property rights, productivity and common property resources

    DEFF Research Database (Denmark)

    Markussen, Thomas

    2008-01-01

    This paper uses data from the 2003/04 Cambodia Household Socioeconomic Survey to investigate the effects of property rights to land. Plots held with a paper documenting ownership in rural Cambodia are found to have higher productivity and land values than other plots, while property rights have...

  17. PHYSICOCHEMICAL PROPERTY CALCULATIONS

    Science.gov (United States)

    Computer models have been developed to estimate a wide range of physical-chemical properties from molecular structure. The SPARC modeling system approaches calculations as site specific reactions (pKa, hydrolysis, hydration) and `whole molecule' properties (vapor pressure, boilin...

  18. Contested Property Claims

    DEFF Research Database (Denmark)

    Property relations are such a common feature of social life that we can sometimes forget the immense complexity of the web of laws, practices, and ideas that allow a property regime to function smoothly. But we are quickly reminded of this complexity when social conflict over property erupts. When...... social actors confront a property regime – for example by squatting – they enact what can be called ‘contested property claims’. These confrontations raise crucial issues of social justice and show the ways in which property conflicts often reflect wider social conflicts. Through a series of case studies...... from across the globe, this multidisciplinary anthology exploring contested property claims brings together works from anthropologists, legal scholars, and geographers, who show how disagreements give us a privileged window onto how property regimes function and illustrates the many ways...

  19. Contested Property Claims

    DEFF Research Database (Denmark)

    Property relations are such a common feature of social life that the complexity of the web of laws, practices, and ideas that allow a property regime to function smoothly are often forgotten. But we are quickly reminded of this complexity when conflict over property erupts. When social actors...... confront a property regime – for example by squatting – they enact what can be called ‘contested property claims’. As this book demonstrates, these confrontations raise crucial issues of social justice and show the ways in which property conflicts often reflect wider social conflicts. Through a series...... of case studies from across the globe, this multidisciplinary anthology brings together works from anthropologists, legal scholars, and geographers, who show how exploring contested property claims offers a privileged window onto how property regimes function, as well as an illustration of the many ways...

  20. Real Property Tax - 2017

    Data.gov (United States)

    Montgomery County of Maryland — This data represents all of the County’s residential real estate properties and all of the associated tax charges and credits with that property processed at the...

  1. Real Property Tax - 2016

    Data.gov (United States)

    Montgomery County of Maryland — This data represents all of the County’s residential real estate properties and all of the associated tax charges and credits with that property processed at the...

  2. Endogenous property rights

    NARCIS (Netherlands)

    Dari-Mattiacci, G.; Guerriero, C.

    2014-01-01

    Albeit the relevance of property rights is well known, their determinants are still poorly understood. When property is fully protected, some buyers with valuation higher than that of original owners are inefficiently excluded from trade due to transaction costs. When protection of property is weak,

  3. Handbook of nanomaterials properties

    CERN Document Server

    Luo, Dan; Schricker, Scott R; Sigmund, Wolfgang; Zauscher, Stefan

    2014-01-01

    Nanomaterials attract tremendous attention in recent researches. Although extensive research has been done in this field it still lacks a comprehensive reference work that presents data on properties of different Nanomaterials. This Handbook of Nanomaterials Properties will be the first single reference work that brings together the various properties with wide breadth and scope.

  4. Property in Nonhuman Primates

    Science.gov (United States)

    Brosnan, Sarah F.

    2011-01-01

    Property is rare in most nonhuman primates, most likely because their lifestyles are not conducive to it. Nonetheless, just because these species do not frequently maintain property does not mean that they lack the propensity to do so. Primates show respect for possession, as well as behaviors related to property, such as irrational decision…

  5. Physical properties of nanorods

    Energy Technology Data Exchange (ETDEWEB)

    Krahne, Roman; George, Chandramohan [Istituto Italiano di Tecnologia, Genoa (Italy). Nanostructures; Manna, Liberato [Istituto Italiano di Tecnologia, Genoa (Italy). Nanochemistry; Morello, Giovanni [CNR, Lecce (Italy). Nanoscience Institute; Figuerola, Albert [Barcelona Univ. (Spain). Inst. de Nanociencia i Nanotecnologia; Deka, Sasanka [Delhi Univ. (India). Dept. of Chemistry

    2013-06-01

    Inorganic nanoparticles are among the most investigated objects nowadays, both in fundamental science and in various technical applications. In this book the physical properties of nanowires formed by nanoparticles with elongated shape, i.e. rod-like or wire-like, are described. The transition in the physical properties is analyzed for nanorods and nanowires consisting of spherical and rod-like nanoparticles. The physical properties of nanowires and elongated inorganic nanoparticles are reviewed too. The optical, electrical, magnetic, mechanical and catalytic properties of nanowires consisting of semiconductors, noble and various other metals, metal oxides properties and metal alloys are presented. The applications of nanorods and nanowires are discussed in the book.

  6. Property law in Jersey

    OpenAIRE

    MacLeod, Rebecca Frances

    2012-01-01

    Jersey law, and within it Jersey property law, has received little academic attention. This thesis seeks to examine, and provide a systematic account of, the Jersey law of property. Specific aspects of substantive law are explored. From these, general observations about the nature and structure of property law are made. Unsurprisingly, given the small size of the island, Jersey has a relatively limited amount of indigenous legal material to offer, much of it in French. Inevitab...

  7. Property Rights and Finance

    OpenAIRE

    Simon Johnson; John McMillan; Christopher Woodruff

    2002-01-01

    Which is the tighter constraint on private sector investment: weak property rights or limited access to external finance? From a survey of new firms in post-communist countries, we find that weak property rights discourage firms from reinvesting their profits, even when bank loans are available. Where property rights are relatively strong, firms reinvest their profits; where they are relatively weak, entrepreneurs do not want to invest from retained earnings.

  8. Physical properties of solids

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Research at ORNL into the physical properties of solids is described. Topics covered include: optical, electrical, and magnetic properties of magnesium oxide; ionic conductivity and superconductivity; surface physics and catalysis; defects and impurities in insulating crystals; photovoltaic conversion of solar energy; and fracture studies

  9. The Idea of Property

    Science.gov (United States)

    Starr, Isidore

    1987-01-01

    Reviews case law, constitutional principles, and early American writings which deal with the idea of private property. Concludes that, in the future, the issues of laissez-fare capitalism, government regulation, and the welfare state will require further clarification of our conception of private property. (JDH)

  10. Quantum property testing

    NARCIS (Netherlands)

    Buhrman, H.; Fortnow, L.; Newman, I.; Röhrig, H.

    2008-01-01

    A language L has a property tester if there exists a probabilistic algorithm that given an input x queries only a small number of bits of x and distinguishes the cases as to whether x is in L and x has large Hamming distance from all y in L. We define a similar notion of quantum property testing and

  11. Physical properties of solids

    Energy Technology Data Exchange (ETDEWEB)

    Wilkinson, M. K.; Young, Jr, F. W.

    1977-10-01

    Research at ORNL into the physical properties of solids is described. Topics covered include: optical, electrical, and magnetic properties of magnesium oxide; ionic conductivity and superconductivity; surface physics and catalysis; defects and impurities in insulating crystals; photovoltaic conversion of solar energy; and fracture studies. (GHT)

  12. Review of particle properties

    International Nuclear Information System (INIS)

    Trippe, T.G.; Barbaro-Galtieri, A.; Kelly, R.L.; Rittenberg, A.; Rosenfeld, A.H.; Yost, G.P.; Barash-Schmidt, N.; Bricman, C.; Hemingway, R.J.; Losty, M.J.; Roos, M.; Chaloupka, V.; Armstrong, B.

    1976-01-01

    This review of the properties of leptons, mesons, and baryons is an updating of Review of Particle Properties, Particle Data Group [Phys. Letters 50B, No.1 (1974), and Supplement, Rev. Mod. Phys. 47 (1975) 535]. Data are evaluated, listed, averaged, and summarized in tables. Numerous tables, figures, and formulae of interest to particle physicists are also included. A data booklet is available

  13. Are Effective Properties Effective?

    International Nuclear Information System (INIS)

    Han, Ru; Ingber, Marc S.; Hsiao, S.-C.

    2008-01-01

    The effective moduli (effective Young's modulus, effective Poisson's ratio, effective shear modulus, and effective bulk modulus) of dispersed-phase-reinforced composite materials are determined at the mesoscopic level using three-dimensional parallel boundary element simulations. By comparing the mesoscopic BEM results and the macroscopic results based on effective properties, limitations in the effective property approach have been examined

  14. Electronic transport properties

    International Nuclear Information System (INIS)

    Young, W.H.

    1985-01-01

    The theory of the electron transport properties of liquid alkali metals is described. Conductivity coefficients, Boltzmann theory, Ziman theory, alkali form factors, Ziman theory and alkalis, Faber-Ziman alloy theory, Faber-Ziman theory and alkali-alkali methods, status of Ziman theory, and other transport properties, are all discussed. (UK)

  15. Intellectual Property Rights Management

    DEFF Research Database (Denmark)

    Alkærsig, Lars; Beukel, Karin; Reichstein, Toke

    Intellectual Property Rights Management explores how the entire toolbox of intellectual property (IP) protection and management are successfully combined and how firms generate value from IP. In particular, this book provides a framework of archetypes which firms will be able to self...

  16. Material properties characterization - concrete

    International Nuclear Information System (INIS)

    England, G.L.; MacLeod, J.S.

    1978-01-01

    A review is presented of the six contributions in the SMiRT 4 conference to Session H5 on structural analysis of prestressed concrete reactor pressure vessels. These relate to short term stress-strain aspects of concrete loaded beyond the linear range in uniaxial and biaxial stress fields, to some time and temperature dependent properties of concrete at working stress levels, and to a programme of strain-gauge testing for the assessment of concrete properties. From the information discussed, it is clear that there are difficulties in determining material properties for concrete, and these are summarised. (UK)

  17. Properties and CAPE

    DEFF Research Database (Denmark)

    Gani, Rafiqul; O'Connell, J.P.

    2001-01-01

    The role of properties in the solution of Computer Aided Process Engineering (CAPE) problems is described in terms of current trend, future challenges and important issues. Three distinct roles of properties in CAFE have been identified - a service role, a service plus advice role and a service......, advice plus solve role. The CAFE problems solved under each of these roles are described together with simple illustrative examples. Finally, the paper describes how some of the future problems related to integration of synthesis, design and control might be dealt with efficiently and reliably through co......-operative CAFE and properties methodologies. (C) 2001 Elsevier Science Ltd. All rights reserved....

  18. Real Property Tax Rates

    Data.gov (United States)

    Montgomery County of Maryland — The Levy Year 2012 real property tax rate dataset reflects all the rates per $100 set each year by the County Council. These rates are applied to the assessed value...

  19. Biological and Pharmacological properties

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Biological and Pharmacological properties. NOEA inhibits Ceramidase. Anandamide inhibits gap junction conductance and reduces sperm fertilizing capacity. Endogenous ligands for Cannabinoid receptors (anandamide and NPEA). Antibacterial and antiviral ...

  20. ACRES - Brownfields Properties

    Data.gov (United States)

    U.S. Environmental Protection Agency — Brownfields are real property, the expansion, redevelopment, or reuse of which may be complicated by the presence or potential presence of a hazardous substance,...

  1. Physical properties and fisheries

    Digital Repository Service at National Institute of Oceanography (India)

    Antony, M.K.

    The physical aspects influencing the different stages of behaviour of the marine fish can be divided into two categories (1) the physical properties of the ocean like temperature, salinity, oxygen, high penetration etc.; and (2) the physical...

  2. Atomistic Properties of Solids

    CERN Document Server

    Sirdeshmukh, Dinker B; Subhadra, K G

    2011-01-01

    The book deals with atomistic properties of solids which are determined by the crystal structure, interatomic forces and atomic displacements influenced by the effects of temperature, stress and electric fields. The book gives equal importance to experimental details and theory. There are full chapters dedicated to the tensor nature of physical properties, mechanical properties, lattice vibrations, crystal structure determination and ferroelectricity. The other crystalline states like nano-, poly-, liquid- and quasi crystals are discussed. Several new topics like nonlinear optics and the Rietveld method are presented in the book. The book lays emphasis on the role of symmetry in crystal properties. Comprehensiveness is the strength of the book; this allows users at different levels a choice of chapters according to their requirements.

  3. Allegheny County Property Assessments

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Real Property parcel characteristics for Allegheny County, PA. Includes information pertaining to land, values, sales, abatements, and building characteristics (if...

  4. Allegheny County Property Viewer

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Webmap of Allegheny municipalities and parcel data. Zoom for a clickable parcel map with owner name, property photograph, and link to the County Real Estate website...

  5. THz Properties of Adhesives

    Science.gov (United States)

    Stübling, E.; Gomell, L.; Sommer, S.; Winkel, A.; Kahlmeyer, M.; Böhm, S.; Koch, M.

    2018-06-01

    We determined the THz properties of 12 different adhesives which are mainly used for industrial purposes. The adhesives applied can be classified according to their chemical structure: epoxy resins, acrylic resins, and polyurethane based materials. This work represents a basis for future studies, which will concentrate on aging effects, including the absorption of water of adhesive joints. Thus, the dielectric properties of the unaged adhesives are investigated and the results of these measurements are described herein.

  6. Properties of leptons

    International Nuclear Information System (INIS)

    Perl, M.L.

    1989-12-01

    The properties of the electron, muon, tau, and their neutrinos are reviewed. Three discrepancies in our understanding of those properties are discussed: the lifetime of orthopositronium, the mass spectra of e + e - pairs produced in heavy ion collisions, and the 1-charged particle modes problem in tau decays. The review concludes with a discussion of what we need to learn about the tau and the consequent need for a tau-charm factory. 68 refs., 7 figs., 8 tabs

  7. Stereotypical Reasoning: Logical Properties

    OpenAIRE

    Lehmann, Daniel

    2002-01-01

    Stereotypical reasoning assumes that the situation at hand is one of a kind and that it enjoys the properties generally associated with that kind of situation. It is one of the most basic forms of nonmonotonic reasoning. A formal model for stereotypical reasoning is proposed and the logical properties of this form of reasoning are studied. Stereotypical reasoning is shown to be cumulative under weak assumptions.

  8. Properties of Ambiguity Functions

    OpenAIRE

    Mulcahy-Stanislawczyk, John

    2014-01-01

    The use of ambiguity functions in radar signal design and analysis is very common. Understanding the various properties and meanings of ambiguity functions allow a signal designer to understand the time delay and doppler shift properties of a given signal. Through the years, several different versions of the ambiguity function have been used. Each of these functions essentially have the same physical meaning; however, the use of different functions makes it difficult to be sure that certai...

  9. Property, care, and environment

    OpenAIRE

    John O'Neill

    2001-01-01

    One influential approach to environmental problems holds that their solution requires the definition of full liberal property rights over goods that will enable their value to be registered in actual or hypothetical markets. How adequate is that solution? In this paper I offer reasons to be sceptical, by placing recent liberal arguments in the context of older debates about property, in particular those concerned with the distribution of care. Although proposals for the extension of liberal p...

  10. Review of particle properties

    Energy Technology Data Exchange (ETDEWEB)

    Yost, G P; Barnett, R M; Hinchliffe, I; Lynch, G R; Rittenberg, A; Ross, R R; Suzuki, M; Trippe, T G; Wohl, C G; Armstrong, B

    1988-04-14

    This review of the properties of gauge bosons, leptons, mesons, and baryons is an updating of the Review of Particle Properties, Particle Data Group (Phys. Lett. 170B (1986)). Data are evaluated, listed, averaged, and summarized in tables. We continue the more orderly set of particle names implemented in the 1986 edition. Numerous tables, figures, and formulae of interest to particle physicists are also included. A data booklet is available.

  11. Review of particle properties

    International Nuclear Information System (INIS)

    Bricman, C.; Dionisi, C.; Hemingway, R.J.; Mazzucato, M.; Montanet, L.; Barash-Schmidt, N.; Crawford, R.C.; Roos, M.; Barbaro-Galtieri, A.; Horne, C.P.; Kelly, R.L.; Losty, M.J.; Rittenberg, A.; Trippe, T.G.; Yost, G.P.; Armstrong, B.

    1978-01-01

    This review of the properties of leptons, mesons, and baryons is an updating of Review of Particle Properties, Particle Data Group [Rev. Mod. Phys. 48 (1976) No. 2, Part II; and Supplement, Phys. Lett. 68B (1977) 1]. Data are evaluated, listed, averaged, and summarized in tables. Numerous tables, figures, and formulae of interest to particle physicists are also included. A data booklet is available. (Auth.)

  12. Thermophysical Properties Program

    Science.gov (United States)

    1997-01-01

    This is a computer generated model of a ground based casting. The objective of the therophysical properties program is to measure thermal physical properties of commercial casting alloys for use in computer programs that predict soldification behavior. This could reduce trial and error in casting design and promote less scrap, sounder castings, and less weight. In order for the computer models to reliably simulate the details of industrial alloy solidification, the input thermophysical property data must be absolutely reliable. Recently Auburn University and TPRL Inc. formed a teaming relationship to establish reliable measurement techniques for the most critical properties of commercially important alloys: transformation temperatures, thermal conductivity, electrical conductivity, specific heat, latent heat, density, solid fraction evolution, surface tension, and viscosity. A new initiative with the American Foundrymens Society has been started to measure the thermophysical properties of commercial ferrous and non-ferrous casting alloys and make the thermophysical property data widely available. Development of casting processes for the new gamma titanium aluminide alloys as well as existing titanium alloys will remain a trial-and-error procedure until accurate thermophysical properties can be obtained. These molten alloys react with their containers on earth and change their composition - invalidating the measurements even while the data are being acquired in terrestrial laboratories. However, measurements on the molten alloys can be accomplished in space using freely floating droplets which are completely untouched by any container. These data are expected to be exceptionally precise because of the absence of impurity contamination and buoyancy convection effects. Although long duration orbital experiments will be required for the large scale industrial alloy measurement program that results from this research, short duration experiments on NASA's KC-135 low

  13. Is [Rural] Property Tax Relevant?

    OpenAIRE

    Villaveces-Niño, Marta-Juanita

    2015-01-01

    The present document presents the general notions and the definition of property taxation and, as part of it, the working definition of rural property taxation emphasizing that property taxation is a matter of “property” and rural property taxation is linked with rural property, specifically with land ownership. In addition, the document presents some facts about the performance of property taxation based on a secondary source of cross-country analysis. In order to giv...

  14. Thermal Properties Measurement Report

    Energy Technology Data Exchange (ETDEWEB)

    Carmack, Jon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Braase, Lori [Idaho National Lab. (INL), Idaho Falls, ID (United States); Papesch, Cynthia [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hurley, David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tonks, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Yongfeng [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gofryk, Krzysztof [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason [Idaho National Lab. (INL), Idaho Falls, ID (United States); Fielding, Randy [Idaho National Lab. (INL), Idaho Falls, ID (United States); Knight, Collin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meyer, Mitch [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-08-01

    The Thermal Properties Measurement Report summarizes the research, development, installation, and initial use of significant experimental thermal property characterization capabilities at the INL in FY 2015. These new capabilities were used to characterize a U3Si2 (candidate Accident Tolerant) fuel sample fabricated at the INL. The ability to perform measurements at various length scales is important and provides additional data that is not currently in the literature. However, the real value of the data will be in accomplishing a phenomenological understanding of the thermal conductivity in fuels and the ties to predictive modeling. Thus, the MARMOT advanced modeling and simulation capability was utilized to illustrate how the microstructural data can be modeled and compared with bulk characterization data. A scientific method was established for thermal property measurement capability on irradiated nuclear fuel samples, which will be installed in the Irradiated Material Characterization Laboratory (IMCL).

  15. Communication of Semantic Properties

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Boelskifte, Per

    2004-01-01

    The selection of materials and planning for production play a key role for the design of physical products. Product function, appearance and expression are influenced by the chosen materials and how they are shaped. However these properties are not carried by the material itself, but by the speci......The selection of materials and planning for production play a key role for the design of physical products. Product function, appearance and expression are influenced by the chosen materials and how they are shaped. However these properties are not carried by the material itself...... processes. This working paper argues for the need for a commonly accepted terminology used to communicate semantic product properties. Designers and others involved in design processes are dependent of a sharp and clear verbal communication. Search facilities in computer programs for product and material...

  16. Liquid hydrogen properties

    International Nuclear Information System (INIS)

    Choi, Jung Woon; Kim, Y. J.; Lee, K. H.; Kim, H. I.; Han, K. Y.; Park, J.H.

    2004-03-01

    The purpose of this report is to provide the input data, whose characteristic is thermodynamic and transport, in the form of equation for the thermo-hydraulic calculations using hydrogen as a working substance. The considered data in this report are particularly focused on the properties of para-hydrogen and of equilibrium-hydrogen around the working temperature range of the HANARO-CNS. The discussed properties of hydrogen are, in turn, the pressure of saturated vapors, the density, the heat of vaporization, thermal conductivity, viscosity, and heat capacity. Several equations to fit the above-mentioned experimental data allow calculating the various properties of liquid hydrogen with high accuracy at all considered temperatures

  17. Optical adhesive property study

    Energy Technology Data Exchange (ETDEWEB)

    Sundvold, P.D.

    1996-01-01

    Tests were performed to characterize the mechanical and thermal properties of selected optical adhesives to identify the most likely candidate which could survive the operating environment of the Direct Optical Initiation (DOI) program. The DOI system consists of a high power laser and an optical module used to split the beam into a number of channels to initiate the system. The DOI requirements are for a high shock environment which current military optical systems do not operate. Five candidate adhesives were selected and evaluated using standardized test methods to determine the adhesives` physical properties. EC2216, manufactured by 3M, was selected as the baseline candidate adhesive based on the test results of the physical properties.

  18. Calibrated Properties Model

    International Nuclear Information System (INIS)

    Ahlers, C.F.; Liu, H.H.

    2001-01-01

    The purpose of this Analysis/Model Report (AMR) is to document the Calibrated Properties Model that provides calibrated parameter sets for unsaturated zone (UZ) flow and transport process models for the Yucca Mountain Site Characterization Project (YMP). This work was performed in accordance with the AMR Development Plan for U0035 Calibrated Properties Model REV00 (CRWMS M and O 1999c). These calibrated property sets include matrix and fracture parameters for the UZ Flow and Transport Model (UZ Model), drift seepage models, drift-scale and mountain-scale coupled-processes models, and Total System Performance Assessment (TSPA) models as well as Performance Assessment (PA) and other participating national laboratories and government agencies. These process models provide the necessary framework to test conceptual hypotheses of flow and transport at different scales and predict flow and transport behavior under a variety of climatic and thermal-loading conditions

  19. Calibrated Properties Model

    International Nuclear Information System (INIS)

    Ahlers, C.; Liu, H.

    2000-01-01

    The purpose of this Analysis/Model Report (AMR) is to document the Calibrated Properties Model that provides calibrated parameter sets for unsaturated zone (UZ) flow and transport process models for the Yucca Mountain Site Characterization Project (YMP). This work was performed in accordance with the ''AMR Development Plan for U0035 Calibrated Properties Model REV00. These calibrated property sets include matrix and fracture parameters for the UZ Flow and Transport Model (UZ Model), drift seepage models, drift-scale and mountain-scale coupled-processes models, and Total System Performance Assessment (TSPA) models as well as Performance Assessment (PA) and other participating national laboratories and government agencies. These process models provide the necessary framework to test conceptual hypotheses of flow and transport at different scales and predict flow and transport behavior under a variety of climatic and thermal-loading conditions

  20. Stem Properties of Autobacteria

    Directory of Open Access Journals (Sweden)

    Boris A. Berdichevskyy

    2014-03-01

    Full Text Available This paper discusses the stem properties of the autobacteria as part of the activation syndrome and persistence of the endogenous microflora in the adaptation process of the macroorganism to stress, as well as the ability of the bacteria to stimulate the cells of the macroorganism to manifest stem properties. The essence of this syndrome involves testing the tissue with the autobacteria of their "host" body to identify the foci of cellular insolvency with the subsequent inclusion of the autostrains in the implementation phase of the catabolic and anabolic inflammations. Considering the genetic tropism of the microbes to the organ-specific tissue of the area affected, the existence of the stem properties of the autobacteria is assumed to be realized in the process of reparative regeneration. The great clinical significance of further study of this phenomenon is not excluded.

  1. Geotechnical properties of rock

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, R.; Gorski, B.; Gyenge, M.

    1995-12-31

    The manual is a compilation of the geotechnical properties of many types of rock that are typical of Canadian mining environments. Included are values for density, porosity, compressive and shear wave velocity, uniaxial compressive strength, Young`s modulus, and Poisson`s ratio. The data base contains material constants that were determined using the Hoek and Brown failure criteria for both before and after failure conditions. 76 data sheets of rock properties in Canadian mines are included. 7 refs., 85 figs., 3 tabs.

  2. Neutrino properties from cosmology

    DEFF Research Database (Denmark)

    Hannestad, S.

    2013-01-01

    In recent years precision cosmology has become an increasingly powerful probe of particle physics. Perhaps the prime example of this is the very stringent cosmological upper bound on the neutrino mass. However, other aspects of neutrino physics, such as their decoupling history and possible non......-standard interactions, can also be probed using observations of cosmic structure. Here, I review the current status of cosmological bounds on neutrino properties and discuss the potential of future observations, for example by the recently approved EUCLID mission, to precisely measure neutrino properties....

  3. Properties of gluon jets

    International Nuclear Information System (INIS)

    Sugano, K.

    1987-01-01

    The properties of gluon jets are reviewed, and the measured characteristics are compared to the theoretical expectations. Although neither data nor models for the gluon jets are in the mature stage, in general the agreement between experiment and theory is remarkable. There are some intriguing differences. Since the properties of gluon jets are deeply rooted in the basic structure of non-Abelian gauge theory, the study of gluon jets casts further light on our understanding of QCD. Finally, the future prospects are discussed

  4. Properties of gluon jets

    International Nuclear Information System (INIS)

    Sugano, K.

    1988-01-01

    The properties of gluon jets are reviewed from an experimental point of view. The measured characteristics are compared to theoretical expectations. Although neither data nor models for the gluon jets are in the mature stage, there are remarkable agreements and also intriguing disagreements between experiment and theory. Since much interesting data have begun to emerge from various experiments and the properties of gluon jets are deeply rooted in the basic structure of non-Abelian gauge theory, the study of gluon jets casts further light on understanding of QCD. The future prospects are discussed

  5. Individual Property Risk Management

    Directory of Open Access Journals (Sweden)

    Michael S. Finke

    2010-01-01

    Full Text Available This paper reviews household property risk management and estimates normatively optimal choice under theoretical assumptions. Although risk retention limits are common in the financial planning industry, estimates of optimal risk retention that include both financial and human wealth far exceed limits commonly recommended. Households appear to frame property losses differently from other wealth losses leading to wealth-reducing, excess risk transfer. Possible theoretical explanations for excess sensitivity to loss are reviewed. Differences between observed and optimal risk management imply a large potential gain from improved choice.

  6. Basic properties of semiconductors

    CERN Document Server

    Landsberg, PT

    2013-01-01

    Since Volume 1 was published in 1982, the centres of interest in the basic physics of semiconductors have shifted. Volume 1 was called Band Theory and Transport Properties in the first edition, but the subject has broadened to such an extent that Basic Properties is now a more suitable title. Seven chapters have been rewritten by the original authors. However, twelve chapters are essentially new, with the bulk of this work being devoted to important current topics which give this volume an almost encyclopaedic form. The first three chapters discuss various aspects of modern band theory and the

  7. Antifouling properties of hydrogels

    International Nuclear Information System (INIS)

    Murosaki, Takayuki; Gong, Jian Ping; Ahmed, Nafees

    2011-01-01

    Marine sessile organisms easily adhere to submerged solids such as rocks, metals and plastics, but not to seaweeds and fishes, which are covered with soft and wet 'hydrogel'. Inspired by this fact, we have studied long-term antifouling properties of hydrogels against marine sessile organisms. Hydrogels, especially those containing hydroxy group and sulfonic group, show excellent antifouling activity against barnacles both in laboratory assays and in the marine environment. The extreme low settlement on hydrogels in vitro and in vivo is mainly caused by antifouling properties against the barnacle cypris. (topical review)

  8. Properties of Boolean orthoposets

    Science.gov (United States)

    Tkadlec, Josef

    1993-10-01

    A Boolean orthoposet is the orthoposet P fulfilling the following condition: If a, b ∈ P and a ∧ b = 0, then a ⊥ b. This condition seems to be a sound generalization of distributivity in orthoposets. Also, the class of (orthomodular) Boolean orthoposets may play an interesting role in quantum logic theory. This class is wide enough and, on the other hand, enjoys some properties of Boolean algebras. In this paper we summarize results on Boolean orthoposets involving distributivity, set representation, properties of the state space, existence of Jauch-Piron states, and results concerning orthocompleteness and completion.

  9. Elastic and viscoplastic properties

    International Nuclear Information System (INIS)

    Lebensohn, R.A.

    2015-01-01

    In this chapter, we review crystal elasticity and plasticity-based self-consistent theories and apply them to the determination of the effective response of polycrystalline aggregates. These mean-field formulations, which enable the prediction of the mechanical behaviour of polycrystalline aggregates based on the heterogeneous and/or directional properties of their constituent single crystal grains and phases, are ideal tools to establish relationships between microstructure and properties of these materials, ubiquitous among fuels and structural materials for nuclear systems. (author)

  10. Review of particle properties

    International Nuclear Information System (INIS)

    Hikasa, K.; Hagiwara, K.; Kawabata, S.; Barnett, R.M.; Groom, D.E.; Trippe, T.G.; Wohl, C.G.; Yost, G.P.; Armstrong, B. Technical Associate; Wagman, G.S. Technical Associate; Stone, J.; Porter, F.C.; Morrison, R.J.; Cutkosky, R.E.; Montanet, L.; Gieselmann, K. Technical Associate; Aguilar-Benitez, M.; Caso, C.; Crawford, R.L.; Roos, M.; Toernqvist, N.A.; Hayes, K.G.; Hoehler, G.; Manley, D.M.

    1992-01-01

    In this Review, we list, evaluate, and average measured properties of gauge bosons, leptons, quarks, mesons, and baryons. We also summarize searches for hypothetical particles such as Higgs bosons, the top quark, heavy neutrinos, monopoles, and supersymmetric particles. All the particle properties and search limits are listed in Summary Tables. We also give numerous tables, figures, formulae, and reviews of topics such as the Standard Model, particle detectors, probability, and statistics. A booklet is available containing the Summary Tables and abbreviated versions of some other sections of this full Review

  11. Antifouling properties of hydrogels

    Directory of Open Access Journals (Sweden)

    Takayuki Murosaki, Nafees Ahmed and Jian Ping Gong

    2011-01-01

    Full Text Available Marine sessile organisms easily adhere to submerged solids such as rocks, metals and plastics, but not to seaweeds and fishes, which are covered with soft and wet 'hydrogel'. Inspired by this fact, we have studied long-term antifouling properties of hydrogels against marine sessile organisms. Hydrogels, especially those containing hydroxy group and sulfonic group, show excellent antifouling activity against barnacles both in laboratory assays and in the marine environment. The extreme low settlement on hydrogels in vitro and in vivo is mainly caused by antifouling properties against the barnacle cypris.

  12. Optical properties of solids

    CERN Document Server

    Wooten, Frederick

    1972-01-01

    Optical Properties of Solids covers the important concepts of intrinsic optical properties and photoelectric emission. The book starts by providing an introduction to the fundamental optical spectra of solids. The text then discusses Maxwell's equations and the dielectric function; absorption and dispersion; and the theory of free-electron metals. The quantum mechanical theory of direct and indirect transitions between bands; the applications of dispersion relations; and the derivation of an expression for the dielectric function in the self-consistent field approximation are also encompassed.

  13. Review of particle properties

    International Nuclear Information System (INIS)

    Montanet, L.; Gieselmann, K. Technical Associate; Barnett, R.M.; Groom, D.E.; Trippe, T.G.; Wohl, C.G.; Armstrong, B. Technical Associate; Wagman, G.S. Technical Associate; Murayama, H.; Stone, J.; Hernandez, J.J.; Porter, F.C.; Morrison, R.J.; Manohar, A.; Aguilar-Benitez, M.; Caso, C.; Lantero, P. Technical Associate; Crawford, R.L.; Roos, M.; Toernqvist, N.A.; Hayes, K.G.; Hoehler, G.

    1994-01-01

    This biennial review summarizes much of Particle Physics. Using data from previous editions, plus 2300 new measurements from 700 papers, we list evaluate, and average measured properties of gauge bosons, leptons, quarks, mesons, and baryons. We also summarize searches for hypothetical particles such as Higgs bosons, heavy neutrinos, monopoles, and supersymmetric particles. All the particle properties and search limits are listed in Summary Tables. We also give numerous tables, figures, formulae, and reviews of topics such as the Standard Model, particle detectors, probability, and statistics. A booklet is available containing the Summary Tables and abbreviated versions of some of the other sections of this full Review

  14. Thermal Property Engineering: Exploiting the Properties of Ceramic Nanocomposites

    Science.gov (United States)

    2018-03-01

    ARL-TR-8308 ● MAR 2018 US Army Research Laboratory Thermal Property Engineering : Exploiting the Properties of Ceramic...return it to the originator. ARL-TR-8308 ● MAR 2018 US Army Research Laboratory Thermal Property Engineering : Exploiting the...2015 – Dec 31 2017 4. TITLE AND SUBTITLE Thermal Property Engineering : Exploiting the Properties of Ceramic Nanocomposites 5a. CONTRACT NUMBER 5b

  15. Thermophysical properties of sodium

    International Nuclear Information System (INIS)

    Harant, M.

    1978-01-01

    Substitution, inverse and substitution inverse relations in form of regression polynomials were used in calculating saturation pressure and density for thermodynamic and transport properties determination of sodium. Program UNISOAUT/A3 was used in calculating regression polynomials coefficients. (J.P.)

  16. properties of anthraquinone

    African Journals Online (AJOL)

    The electrochemical and energetic properties of a carbon paste electrode. (CPE) Containing ... 9,10-Anthraquinone is the most energy-rich anodic material known [1,2]). ... Ethiop. 1995, 9(2). G.S.T.P4 and a SEFRAM chart recorder was used.

  17. Evaluation of stigmatized properties

    Directory of Open Access Journals (Sweden)

    Hajnal István

    2017-12-01

    Full Text Available Stigmatized property is real estate burdened with an external negative effect. Individual cases are spread along a broad spectrum, along many dimensions that include the rational and the irrational, the acute and the chronic. Examples for the stigmatizing effect are a nearby airport, ground water contaminated by chemicals, presence of a high-voltage power line, and so on. Eval­uation of these properties needs special methodology. Stigma can reduce the property’s market value through a particular, multi-layered filter. The author systematically examines the professional literature’s cases of evaluation of stigmatized properties. The research aims to organize and compare the cases in order to calculate the market value of stigmatized properties. Based on the analysis, six significant dimensions are identified. A focus group of 19 experts examined and individually evaluated the stigma­tizing effects along these different dimensions. The author suggests that it is possible to estimate the stigma’s effect and compare different cases to one another effectively. The results allow the international methodology of valu­ation to be processed.

  18. Modelling Real Property Transactions

    DEFF Research Database (Denmark)

    Stubkjær, Erik

    2003-01-01

    Der er store forskelle i financieringsomkostningerne ved hussalg i forskellige lande. Er disse forskelle nødvendige? og kan udgifterne reduceres? Sådanne spørgsmål søger forskningsprojektet ?Modelling Real Property Transactions?, officielt sat i værk indenfor rammerne af COST (European Co...

  19. Optical properties of nanoparticles

    DEFF Research Database (Denmark)

    Bendix, Pól Martin

    2015-01-01

    At the NBI I am involved in projects relating to optical properties of metallic nanoparticles in particular with respect to plasmonic heating with direct applications to photothermal cancer therapy. For this purpose we have developed heating assays that can be used to measure the heating of any...... nanoscopic heat source like an irradiated nanoparticle...

  20. Compaction properties of isomalt

    NARCIS (Netherlands)

    Bolhuis, Gerad K.; Engelhart, Jeffrey J. P.; Eissens, Anko C.

    Although other polyols have been described extensively as filler-binders in direct compaction of tablets, the polyol isomalt is rather unknown as pharmaceutical excipient, in spite of its description in all the main pharmacopoeias. In this paper the compaction properties of different types of

  1. Modelling Real Property Transactions

    DEFF Research Database (Denmark)

    Stubkjær, Erik

    2002-01-01

    for more elaborated concept sets - for a theoretical basis - was among the motives for proposing a concerted research project: Modelling Real Property Transactions. Researchers from 11 European countries co-operate in the project that gained status as a COST action as of March 1st 2001. The majority...

  2. Uranium processing and properties

    CERN Document Server

    2013-01-01

    Covers a broad spectrum of topics and applications that deal with uranium processing and the properties of uranium Offers extensive coverage of both new and established practices for dealing with uranium supplies in nuclear engineering Promotes the documentation of the state-of-the-art processing techniques utilized for uranium and other specialty metals

  3. Quantum Property Testing

    NARCIS (Netherlands)

    H. Buhrman (Harry); L. Fortnow (Lance); I. Newman; H. Röhrig (Hein)

    2008-01-01

    textabstractA language $L$ has a property tester if there exists a probabilistic algorithm that given an input $x$ queries only a small number of bits of $x$ and distinguishes the cases as to whether $x$ is in $L$ and $x$ has large Hamming distance from all $y$ in $L$. We define a similar notion of

  4. Calibrated Properties Model

    International Nuclear Information System (INIS)

    Ghezzehej, T.

    2004-01-01

    The purpose of this model report is to document the calibrated properties model that provides calibrated property sets for unsaturated zone (UZ) flow and transport process models (UZ models). The calibration of the property sets is performed through inverse modeling. This work followed, and was planned in, ''Technical Work Plan (TWP) for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654], Sections 1.2.6 and 2.1.1.6). Direct inputs to this model report were derived from the following upstream analysis and model reports: ''Analysis of Hydrologic Properties Data'' (BSC 2004 [DIRS 170038]); ''Development of Numerical Grids for UZ Flow and Transport Modeling'' (BSC 2004 [DIRS 169855]); ''Simulation of Net Infiltration for Present-Day and Potential Future Climates'' (BSC 2004 [DIRS 170007]); ''Geologic Framework Model'' (GFM2000) (BSC 2004 [DIRS 170029]). Additionally, this model report incorporates errata of the previous version and closure of the Key Technical Issue agreement TSPAI 3.26 (Section 6.2.2 and Appendix B), and it is revised for improved transparency

  5. Atomic transport properties

    International Nuclear Information System (INIS)

    Freyss, M.

    2015-01-01

    As presented in the first chapter of this book, atomic transport properties govern a large panel of nuclear fuel properties, from its microstructure after fabrication to its behaviour under irradiation: grain growth, oxidation, fission product release, gas bubble nucleation. The modelling of the atomic transport properties is therefore the key to understanding and predicting the material behaviour under irradiation or in storage conditions. In particular, it is noteworthy that many modelling techniques within the so-called multi-scale modelling scheme of materials make use of atomic transport data as input parameters: activation energies of diffusion, diffusion coefficients, diffusion mechanisms, all of which are then required to be known accurately. Modelling approaches that are readily used or which could be used to determine atomic transport properties of nuclear materials are reviewed here. They comprise, on the one hand, static atomistic calculations, in which the migration mechanism is fixed and the corresponding migration energy barrier is calculated, and, on the other hand, molecular dynamics calculations and kinetic Monte-Carlo simulations, for which the time evolution of the system is explicitly calculated. (author)

  6. Properties of Bc meson

    Indian Academy of Sciences (India)

    sector with different charge and flavours, due to which its decay properties are ... For a heavy–heavy quark bound system such as c¯b we treat both the quarks c ... (4) gives the spin average masses of the system in terms of the power index ν.

  7. Synthesis, characterization and properties

    Indian Academy of Sciences (India)

    Unknown

    work, we report herein the synthesis, structural cha- racterization and properties of a chiral Mn(IV) mononuclear ... atmosphere with a platinum disc working electrode, a platinum wire auxiliary electrode and a Ag/AgCl ... SMART APEX CCD area detector system [λ(Mo-. Kα) = 0⋅71073 Å], graphite monochromator, 2400.

  8. Soil properties and processes

    NARCIS (Netherlands)

    Hartemink, A.E.; McBratney, A.B.; White, R.E.

    2009-01-01

    This four-volume set, edited by leading experts in soil science, brings together in one collection a series of papers that have been fundamental to the development of soil science as a defined discipline. Tis volume 2 on Soil Properties and Processes covers: - Soil physics - Soil (bio)chemistry -

  9. Blockchain: properties and misconceptions

    Directory of Open Access Journals (Sweden)

    Daniel Conte de Leon

    2017-12-01

    Full Text Available Purpose - The purpose of this article is to clarify current and widespread misconceptions about the properties of blockchain technologies and to describe challenges and avenues for correct and trustworthy design and implementation of distributed ledger system (DLS or Technology (DLT. Design/methodology/approach - The authors contrast the properties of a blockchain with desired, however emergent, properties of a DLS, which is a complex and distributed system. They point out and justify, with facts and analysis, current misconceptions about the blockchain and DLSs. They describe challenges that these systems will need to address and possible solution avenues for achieving trustworthiness. Findings - Many of the statements that have appeared on the internet, news and academic articles, such as immutable ledger and exact copies, may be misleading. These are desired emergent properties of a complex system, not assured properties. It is well-known within the distributed systems and critical software community that it is extremely hard to prove that a complex system correctly and completely implements emergent properties. Further research and development for trustworthy DLS design and implementation is needed, both practical and theoretical. Research limitations/implications - This is the first known published attempt at describing current misconceptions about blockchain technologies. Further collaborative work, discussions, potential solutions, evaluations, resulting publications and verified reference implementations are needed to ensure DLTs are safe, secure, and trustworthy. Practical implications - Interdisciplinary teams with members from academia, business and industry, and from disciplines such as business, entrepreneurship, theoretical and practical computer science, cybersecurity, finance, mathematics and statistics, must be formed. Such teams must collaborate with the objective of developing strategies and techniques for ensuring the

  10. The trespasses of property law.

    Science.gov (United States)

    Wall, Jesse

    2014-01-01

    The purpose of this article is to identify a limit to the appropriate application of property law to the use and storage of bodily material. I argue here that property law ought to be limited to protecting 'contingent rights' and that recent cases where property rights have been recognised in semen represent the application of property law beyond this limit. I also suggest how the law ought to develop in order to avoid the overextensive use of property law.

  11. Properties of plutonium

    International Nuclear Information System (INIS)

    Ahn, Jin Su; Yoon, Hwan Ki; Min, Kyung Sik; Kim, Hyun Tae; Ahn, Jong Sung; Kwag, Eon Ho; Ryu, Keon Joong

    1996-03-01

    Plutonium has unique chemical and physical properties. Its uniqueness in use has led to rare publications, in Korea. This report covers physical aspects of phase change of metal plutonium, mechanical properties, thermal conductivity, etc, chemical aspects of corrosion, oxidation, how to produce plutonium from spent fuels by describing various chemical treatment methods, which are currently used and were used in the past. It also contains characteristics of the purex reprocessing process which is the most widely used nowadays. And show processes to purify and metalize from recovered plutonium solution. Detection and analysis methods are introduced with key pints for handling, critical safety, toxicity, and effects on peoples. This report gives not only a general idea on what plutonium is, rather than deep technical description, but also basic knowledge on plutonium production and safeguards diversion from the view point of nonproliferation. 18 refs. (Author) .new

  12. properties and luminosity functions

    Directory of Open Access Journals (Sweden)

    Hektor Monteiro

    2007-01-01

    Full Text Available In this article, we present an investigation of a sample of 1072 stars extracted from the Villanova Catalog of Spectroscopically Identified White Dwarfs (2005 on-line version, studying their distribution in the Galaxy, their physical properties and their luminosity functions. The distances and physical properties of the white dwarfs are determined through interpolation of their (B-V or (b-y colors in model grids. The solar position relative to the Galactic plane, luminosity function, as well as separate functions for each white dwarf spectral type are derived and discussed. We show that the binary fraction does not vary significantly as a function of distance from the Galactic disk out to 100 pc. We propose that the formation rates of DA and non-DAs have changed over time and/or that DAs evolve into non-DA types. The luminosity functions for DAs and DBs have peaks possibly related to a star burst event.

  13. Rock properties data base

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, R.; Gorski, B.; Gyenge, M.

    1991-03-01

    As mining companies proceed deeper and into areas whose stability is threatened by high and complex stress fields, the science of rock mechanics becomes invaluable in designing underground mine strata control programs. CANMET's Mining Research Laboratories division has compiled a summary of pre- and post-failure mechanical properties of rock types which were tested to provide design data. The 'Rock Properties Data Base' presents the results of these tests, and includes many rock types typical of Canadian mine environments. The data base also contains 'm' and 's' values determined using Hoek and Brown's failure criteria for both pre- and post-failure conditions. 7 refs., 3 tabs., 9 figs., 1 append.

  14. Property company's sustainability goals.

    Science.gov (United States)

    Ormsby, Kim

    2014-11-01

    In a keynote presentation on the second morning of this year's Healthcare Estates conference, Kim Ormsby (pictured), national corporate social responsibility (CSR) and sustainability manager at NHS Property Services, discussed how, as part of its broader goals of 'supporting the NHS in delivering clinical services', and 'helping to enhance the experience' of patients visiting its buildings, the organization would continue to pursue and embed in its activities sustainable policies wherever and whenever possible, encouraging both its staff and tenants to take a similar approach. In an informative address, she highlighted some of the key steps the property company had already taken to encourage a proactive approach. Echoing the sentiments of Day One keynote speaker, Julian Hartley (see pages 55-60), she argued that one of the fundamentals to success was wide-ranging staff engagement.

  15. Electrical properties of materials

    CERN Document Server

    Solymar, L; Syms, R R A

    2014-01-01

    An informal and highly accessible writing style, a simple treatment of mathematics, and clear guide to applications have made this book a classic text in electrical and electronic engineering. Students will find it both readable and comprehensive. The fundamental ideas relevant to the understanding of the electrical properties of materials are emphasized; in addition, topics are selected in order to explain the operation of devices having applications (or possible future applications) in engineering. The mathematics, kept deliberately to a minimum, is well within the grasp of a second-year student. This is achieved by choosing the simplest model that can display the essential properties of a phenomenom, and then examining the difference between the ideal and the actual behaviour. The whole text is designed as an undergraduate course. However most individual sections are self contained and can be used as background reading in graduate courses, and for interested persons who want to explore advances in microele...

  16. Gravitational properties of antimatter

    International Nuclear Information System (INIS)

    Goldman, T.; Nieto, M.M.

    1985-01-01

    Quantum gravity is at the forefront of modern particle physics, yet there are no direct tests, for antimatter, of even the principle of equivalence. We note that modern descriptions of gravity, such as fibre bundles and higher dimensional spacetimes, allow violations of the commonly stated form of the principle of equivalence, and of CPT. We review both indirect arguments and experimental tests of the expected gravitational properties of CPT-conjugate states. We conclude that a direct experimental test of the gravitational properties of antimatter, at the 1% (or better) level, would be of great value. We identify some experimental reasons which make the antiproton a prime candidate for this test, and we strongly urge that such an experiment be done at LEAR. 21 references

  17. Industrial nuclear property

    International Nuclear Information System (INIS)

    Lepetre, M.

    1976-01-01

    The first requests for patents for the use of nuclear power filed in France in 1939. This paper reviews the regulations on industrial nuclear property in various countries. The patenting system in several socialist countries is characterized by the fact that inventions on the production and use of radioactive materials may not be patented. This equally applies in India. In the United States, this type of invention may be patented except for those involving military uses and which must be notified to the federal authorities. In France, all industrial nuclear property is grouped under the same body, Brevatome, created in 1958, which enables the allocation of rights to be negotiated between the different interested parties, the Atomic Energy Commission (CEA), Electricite de France (EDF) and private industry. Under the Euratom Treaty, all inventions, even those governed by secrecy in Member countries, must be communicated to the Commission of the European Communities. (NEA) [fr

  18. Thermal Properties of Matter

    Science.gov (United States)

    Khachan, Joe

    2018-02-01

    The ancient Greeks believed that all matter was composed of four elements: earth, water, air, and fire. By a remarkable coincidence (or perhaps not), today we know that there are four states of matter: solids (e.g. earth), liquids (e.g. water), gasses (e.g. air) and plasma (e.g. ionized gas produced by fire). The plasma state is beyond the scope of this book and we will only look at the first three states. Although on the microscopic level all matter is made from atoms or molecules, everyday experience tells us that the three states have very different properties. The aim of this book is to examine some of these properties and the underlying physics.

  19. Thermodynamic properties of vanadium

    International Nuclear Information System (INIS)

    Desai, P.D.

    1986-01-01

    This work reviews and discusses the data and information on the various thermodynamic properties of vanadium available through March 1985. These include the heat capacity and enthalpy, enthalpy of melting, vapor pressure, and enthalpy of vaporization. The existing data have been critically evaluated and analyzed, and the recommended values for heat capacity, enthalpy, entropy, and Gibbs energy function covering the temperature range from 1 to 3800 K have been generated. These values are referred to tempertures based on IPTS-1968. The units used for various properties are joules per mole (J. mol - 1 ). The estimated uncertainties in the heat capacity are +/-3% below 15 K, +/-10% from 15 to 150 K, +/-3% from 150 to 298.15 K, +/-2% from 298.15 to 1000 K, +/-3% from 1000 to the melting point (2202 K), and +/-5% in the liquid region

  20. Properties of plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Jin Su; Yoon, Hwan Ki; Min, Kyung Sik; Kim, Hyun Tae; Ahn, Jong Sung; Kwag, Eon Ho; Ryu, Keon Joong [Korea Atomic Energy Research Institute, Daeduk (Korea, Republic of)

    1996-03-01

    Plutonium has unique chemical and physical properties. Its uniqueness in use has led to rare publications, in Korea. This report covers physical aspects of phase change of metal plutonium, mechanical properties, thermal conductivity, etc, chemical aspects of corrosion, oxidation, how to produce plutonium from spent fuels by describing various chemical treatment methods, which are currently used and were used in the past. It also contains characteristics of the purex reprocessing process which is the most widely used nowadays. And show processes to purify and metalize from recovered plutonium solution. Detection and analysis methods are introduced with key pints for handling, critical safety, toxicity, and effects on peoples. This report gives not only a general idea on what plutonium is, rather than deep technical description, but also basic knowledge on plutonium production and safeguards diversion from the view point of nonproliferation. 18 refs. (Author) .new.

  1. Intellectual Property Rights Management

    DEFF Research Database (Denmark)

    Alkærsig, Lars; Beukel, Karin; Reichstein, Toke

    -identify with and which will allow companies to focus on the IP and IP Management issues most relevant to them. By doing so, the authors offer further insights as to the use of IP and IP management practices across firms. By looking at empirical data covering the population of firms, the findings not only pertain......Intellectual Property Rights Management explores how the entire toolbox of intellectual property (IP) protection and management are successfully combined and how firms generate value from IP. In particular, this book provides a framework of archetypes which firms will be able to self...... to large organization but also reflect the practices and operations that reside in SMEs. This volume also utilizes labor market and firm data to determine whether there is a definitive relationship between IP and economic performance on the firm level....

  2. Photoelectronic properties of semiconductors

    CERN Document Server

    Bube, Richard H

    1992-01-01

    The interaction between light and electrons in semiconductors forms the basis for many interesting and practically significant properties. This book examines the fundamental physics underlying this rich complexity of photoelectronic properties of semiconductors, and will familiarise the reader with the relatively simple models that are useful in describing these fundamentals. The basic physics is also illustrated with typical recent examples of experimental data and observations. Following introductory material on the basic concepts, the book moves on to consider a wide range of phenomena, including photoconductivity, recombination effects, photoelectronic methods of defect analysis, photoeffects at grain boundaries, amorphous semiconductors, photovoltaic effects and photoeffects in quantum wells and superlattices. The author is Professor of Materials Science and Electrical Engineering at Stanford University, and has taught this material for many years. He is an experienced author, his earlier books having fo...

  3. 1. Thermochemical properties

    International Nuclear Information System (INIS)

    Rand, M.H.

    1975-01-01

    Thermodynamic properties (activity; molar heat capacity; free energy of reactions; partial molar free energy of solution; heat of reactions; heat of formation at 298 0 K; partial molar heat of solution; molar heat of evaporation, fusion, sublimation and transformation; standard entropy at 298 0 K; entropy of reactions; partial molar entropy of solution; molar entropy of evaporation, fusion, sublimation and transformation) of thorium, its compounds and binary alloy systems are reviewed

  4. Supercapacitors: Properties and applications

    OpenAIRE

    Libich, Jiří; Máca, Josef; Vondrák, Jiří; Čech, Ondřej; Sedlaříková, Marie

    2018-01-01

    Energy accumulation and storage is one of the most important topics in our times. This paper presents the topic of supercapacitors (SC) as energy storage devices. Supercapacitors represent the alternative to common electrochemical batteries, mainly to widely spread lithium-ion batteries. By physical mechanism and operation principle, supercapacitors are closer to batteries than to capacitors. Their properties are somewhere between batteries and capacitors. They are able to quickly ac...

  5. Dielectric properties of polyethylene

    International Nuclear Information System (INIS)

    Darwish, S.; Riad, A.S.; El-Shabasy, M.

    2005-01-01

    The temperature dependence of dielectric properties in polyethylene was measured in the frequency range from 10 to 105 Hz. The frequency dependence of the complex impedance in the complex plane could be fitted by semicircles. The system could be represented by an equivalent circuit of a bulk resistance in series with parallel surface resistance-capacitance combination. The relaxation time, has been evaluated from experimental results. Results reveal that the temperature dependence, is a thermally activated process

  6. Nitrocyclopropanes: synthesis and properties

    Energy Technology Data Exchange (ETDEWEB)

    Averina, Elena B; Yashin, N V; Kuznetsova, Tamara S; Zefirov, Nikolai S [Department of Chemistry, M.V. Lomonosov Moscow State University, Moscow (Russian Federation)

    2009-10-31

    State-of-the-art data on the methods of synthesis, properties and transformations of nitro- and- dinitrocyclopropanes of different structure is generalized and described systematically. The attention is focused on stereoselective cyclopropanation methods, new approaches to the synthesis of natural products and their synthetic analogues with diversified biological activities, in particular, of aminocyclopropane acids based on nitrocyclopropanes, and the formation of structures of energetic compounds.

  7. Hydromechanics - basic properties

    International Nuclear Information System (INIS)

    Lee, Sung Tak; Lee, Je Geun

    1987-03-01

    This book tells of hydromechanics, which is about basic properties of hydromechanics such as conception, definition, mass, power and weight, and perfect fluid and perfect gas, hydrostatics with summary, basic equation of hydrostatics, relative balance of hydrostatics, and kinematics of hydromechanics, description method of floating, hydromechanics about basic knowledge, equation of moment, energy equation and application of Bernoulli equation, application of momentum theory, inviscid flow and fluid measuring.

  8. Expropriation of real property

    OpenAIRE

    Havelka, Rostislav

    2011-01-01

    79 14. EXPROPRIATION OF OWNERSHIP TITLE TO LAND AND BUILDINGS This work is titled "Expropriation of ownership title to land and buildings". An expropriation is one of the special interference of the state to the property right. It not allows only to the deprivation of the ownership title but also the restriction thereof. In the Czech Republic there are legal bases of expropriation established in the Bill of Fundamental Rights and Freedoms, which is part of constitutional system. Based on the ...

  9. GEOPHYSICAL PROPERTIES OF SOILS

    KAUST Repository

    Santamarina, Carlos

    2016-12-01

    Low energy perturbations used in geophysical methods provide insightful information about constant-fabric soil properties and their spatial variability. There are causal links between soil type, index properties, elastic wave velocity, electromagnetic wave parameters and thermal properties. Soil type relates to the stress-dependent S-wave velocity, thermal and electrical conductivity and permittivity. The small strain stiffness reflects the state of stress, the extent of diagenetic cementation and/or freezing. Pore fluid chemistry, fluid phase and changes in either fluid chemistry or phase manifest through electromagnetic measurements. The volumetric water content measured with electromagnetic techniques is the best predictor of porosity if the water saturation is 100%. Changes in water saturation alter the P-wave velocity when Srà100%, the S-wave velocity at intermediate saturations, and the thermal conductivity when the saturation is low Srà0%. Finally, tabulated values suffice to estimate heat capacity and latent heat for engineering design, however thermal conductivity requires measurements under proper field conditions.

  10. Equivalence properties for the Radon-Nikodym property types and ...

    African Journals Online (AJOL)

    We show that the types I- and II-Λ-Radon-Nikodym Property of Banach spaces on the one hand, and the I- and II-Λ-Complete Continuity Property on the other, are equivalent properties whenever Λ is an ordering subset of a discrete abelian group. Mathematics Subject Classification (2000): Primary 46E40, 46G10; ...

  11. Soil/Rock Properties Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Soil/Rock Properties LaboratoryLocation: Spokane SiteThe Soil/Rock Properties Laboratory is contained in the soils bay, a 4,700 sq. ft. facility that provides space...

  12. Allegheny County Property Assessment Appeals

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Lists property assessment appeals filed and heard with the Board of Property Assessment Appeals and Review (BPAAR) and the hearing results, for tax years 2015 to...

  13. Allegheny County Property Sale Transactions

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains data on all Real Property parcels that have sold since 2013 in Allegheny County, PA. Before doing any market analysis on property sales, check...

  14. Cellular signalling properties in microcircuits

    DEFF Research Database (Denmark)

    Toledo-Rodriguez, Maria; El Manira, Abdeljabbar; Wallén, Peter

    2005-01-01

    Molecules and cells are the signalling elements in microcircuits. Recent studies have uncovered bewildering diversity in postsynaptic signalling properties in all areas of the vertebrate nervous system. Major effort is now being invested in establishing the specialized signalling properties...

  15. Assisted Housing - Multifamily Properties - Assisted

    Data.gov (United States)

    Department of Housing and Urban Development — HUD's Multifamily Housing property portfolio consist primarily of rental housing properties with five or more dwelling units such as apartments or town houses, but...

  16. Thermophysical properties of stainless steels

    International Nuclear Information System (INIS)

    Kim, C.S.

    1975-09-01

    Recommended values of the thermodynamic and transport properties of stainless steels Type 304L and Type 316L are given for temperatures from 300 to 3000 0 K. The properties in the solid region were obtained by extrapolating available experimental data to the melting range, while appropriate correlations were used to estimate the properties in the liquid region. The properties evaluated include the enthalpy, entropy, specific heat, vapor pressure, density, thermal expansion coefficient, thermal conductivity, thermal diffusivity, and viscosity. (9 fig, 11 tables)

  17. Making and Breaking Property Rights

    DEFF Research Database (Denmark)

    Justesen, Mogens Kamp

    2015-01-01

    This paper analyzes why some governments protect property rights while others do not. Although institutional constraints may affect government incentives to protect property rights, the paper emphasizes that different political institutions have dissimilar effects. Coalition institutions that make...... governments accountable to large groups in society are particularly important, whereas division of powers between veto players is hypothesized to have more ambiguous effects on property rights. Empirical analyses of panel data support the proposition that coalition institutions matter for property-rights...

  18. Dielectric Properties Of Nanoferrites

    International Nuclear Information System (INIS)

    Jankov, Stevan B.; Cvejic, Zeljka N.; Rakic, Srdjan; Srdic, Vladimir

    2007-01-01

    Dielectric properties: permittivity, loss factor, tan delta and ionic conductivity of nanostructured ferrites have been measured. Samples used were nickel, zinc and yttrium doped ferrites mixed in various ratios. The synthesis has been performed using precipitation method and obtained powders were pressed in pellets under varying pressure. X-ray diffractography approach for the refinement of structure and microstructural analysis has been performed. All parameters have been measured in 1 Hz to 100 kHz frequency range and 30 deg. C to 80 deg. C temperature range. Significant improvements in permittivity, loss factor and ionic conductivity comparing to bulk samples have been observed

  19. Properties of inductive reasoning.

    Science.gov (United States)

    Heit, E

    2000-12-01

    This paper reviews the main psychological phenomena of inductive reasoning, covering 25 years of experimental and model-based research, in particular addressing four questions. First, what makes a case or event generalizable to other cases? Second, what makes a set of cases generalizable? Third, what makes a property or predicate projectable? Fourth, how do psychological models of induction address these results? The key results in inductive reasoning are outlined, and several recent models, including a new Bayesian account, are evaluated with respect to these results. In addition, future directions for experimental and model-based work are proposed.

  20. The Forgotten Property Rights

    DEFF Research Database (Denmark)

    Markussen, Thomas; Tarp, Finn; Van Den Broeck, Katleen

    2011-01-01

    Studies of land property rights usually focus on tenure security and transfer rights. Rights to determine how to use the land are regularly ignored. However, user rights are often limited. Relying on a unique Vietnamese panel data set at both household and plot levels, we show that crop choice...... restrictions are widespread and prevent crop diversification. Restrictions do not decrease household income, but restricted households work harder, and there are indications that they are supplied with higher quality inputs. Our findings are consistent with the view that it is possible to intervene effectively...

  1. The Forgotten Property Rights

    DEFF Research Database (Denmark)

    Markussen, Thomas; Tarp, Finn; Van Den Broeck, Katleen

    Studies of land property rights usually focus on tenure security and transfer rights. Rights to determine how to use the land are regularly ignored. However, in transition economies such as Vietnam and China, user rights are often limited. Relying on a unique Vietnamese panel data set at both...... household and plot level, we show that crop choice restrictions are widespread and prevent crop diversification. Restrictions do not decrease household income, but restricted households work harder, and there are indications that they are supplied with higher quality inputs. Our findings are consistent...

  2. Land degradation and property regimes

    Science.gov (United States)

    Paul M. Beaumont; Robert T. Walker

    1996-01-01

    This paper addresses the relationship between property regimes and land degradation outcomes, in the context of peasant agriculture. We consider explicitly whether private property provides for superior soil resource conservation, as compared to common property and open access. To assess this we implement optimization algorithms on a supercomputer to address resource...

  3. 76 FR 2001 - Government Property

    Science.gov (United States)

    2011-01-12

    ... change ``approval of the NASA Industrial Property Officer to ``approval of the Plant Clearance Officer... equipment), demolition, or management of real property. 0 3. Subpart 1845.3 is added to read as follows...-Government) use of any NASA equipment. 1845.302 Use of Government property on contracts with foreign...

  4. Scintillation properties of GSO

    International Nuclear Information System (INIS)

    Melcher, C.L.; Schweitzer, J.S.; Utsu, T.; Akiyama, S.

    1990-01-01

    The timing properties of Gd 2 SiO 5 :Ce (GSO) single crystal scintillators have previously been evaluated for positron emission tomography applications. The measured time resolution, however, was worse than expected from calculations based on photoelectron yield and a 60 nanosecond exponential decay constant, leading us to further investigate GSO's basic properties. With a time-correlated-single-photon technique, the authors have found two decay components, one of 56 ns and one of 600 ns, the latter containing 10--15% of the total scintillation output. This may explain the difference between the experimental and theoretical time resolutions and confirms a previous hypothesis of a long decay component. In addition, the authors have found that each component's decay constant strongly depends on the cerium concentration. The primary component varies from ∼ 20 ns to ∼ 190 ns and the secondary component varies from ∼ 70 ns to ∼ 1200 ns as the cerium concentration is varied from 5.0 mol% to 0.1 mol%

  5. Mechanical properties of papercrete

    Directory of Open Access Journals (Sweden)

    Zaki Harith

    2018-01-01

    Full Text Available This paper studies the uses, of waste paper as an additional material in concrete mixes. Papercrete is a term as the name seems, to imply a mixture of paper and concrete. It is a new, composite material using waste paper, as a partial addition of Portland cement, and is a sustainable, building material due to, reduced amount of waste paper being put to use. It gains, latent strength due to presence of hydrogen bonds in microstructure of paper. Papercrete has been, reported to be a low cost alternative, building construction, material and has, good sound absorption, and thermal insulation; to be a lightweight and fire-resistant material. The percent of waste paper used (after treating namely (5%, 10%, 15% and 20% by weight of cement to explore the mechanical properties of the mixes (compressive strength, splitting tensile strength, flexural strength, density, as compared with references mixes, it was found that fresh properties affected significantly by increasing the waste paper content. The compressive strength, splitting tensile strength, flexural strength and density got decreased with increase in the percentage of paper.

  6. Properties of materials

    CERN Document Server

    Kelly, P F

    2014-01-01

    Materials 'Tidings' of Rigidity's Breakdown Elastic Properties of Solids Elastic Solids in Series and Parallel Fluid Statics Eureka! Fluid Dynamics: Flux Bernoulli's Equation No Confusion, It's Just Diffusion Baby, It's Viscous Outside Gas Gas Gas Through the Earth and Back Introduction to Simple Harmonic Oscillation SHO-Time Springs in Series and Parallel SHO: Kinematics, Dynamics, and Energetics Damped Oscillation: Qualitative Damped Oscillation: Explicitly Forced Oscillations Impedance and Power Resonance The First Wave Wave Dynamics and Phenomenology Linear Superposition of Waves Linear Superposition of Rightmoving Harmonic Waves Standing Waves Transverse Waves: Speed and Energetics Speed of Longitudinal Waves Energy Content of Longitudinal Waves Inhomogeneous Media Doppler Shifts Huygens' Principle, Interference, and Diffraction Say Hello, Wave Goodbye Optics Mirror Mirror Refraction Through a Glass Darkly Temperature and Thermometry Heat Convective and Conductive Heat Flow Radiative Heat Flow More Radia...

  7. Sorption properties of wool

    Directory of Open Access Journals (Sweden)

    Radetić Maja M.

    2004-01-01

    Full Text Available Strict ecological legislation, especially in highly developed countries, imposed requirements for the purification of industrial effluents and the need for efficient oil clean up after sea and inland water spills. Although numerous processes have been developed, the application of sorbents is still one of the most efficient methods to remove heavy metal ions, dyes and crude oil from water. Recently, special attention was paid to sorbents based on natural fibres. A review of studies concerning the sorption properties of wool is presented in this paper. The presence of various functional groups on the wool fibre surface contributes to the efficient sorption of heavy metal ions and dyes. A hydrophobic, scaly surface and fibre crimp strongly influence the high sorption capacity of wool for oil. Wool has great sorption potential even as a recycled material. Accordingly, it can be used as a viable substitute to commercially available synthetic sorbents that show poor biodegradab ility.

  8. Intellectual Property and Innovation

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    Francis Gurry has led WIPO as Director General since 1st October, 2008. He was reappointed in May 2014 for a second six-year term, which runs until September 2020. Under his leadership, WIPO is addressing major challenges. These include managing the stress on the international patent and copyright systems produced by rapid technological change, by globalisation and increased demand; reducing the knowledge gap between developed and developing countries; and ensuring that the intellectual property (IP) system serves its fundamental purpose of encouraging creativity and innovation in all countries. Every year, WIPO publishes the Global Innovation Index (GII), which provides detailed metrics about the innovation performance of countries and economies around the world. The 2016 edition highlighted CERN as an example of successful, regional innovation initiatives. In this seminar Mr. Gurry will share his knowledge and views on the role of IP in innovation. You can read a message from Mr. Gurry here : http://...

  9. Properties of subentropy

    International Nuclear Information System (INIS)

    Datta, Nilanjana; Dorlas, Tony; Jozsa, Richard; Benatti, Fabio

    2014-01-01

    Subentropy is an entropy-like quantity that arises in quantum information theory; for example, it provides a tight lower bound on the accessible information for pure state ensembles, dual to the von Neumann entropy upper bound in Holevo's theorem. Here we establish a series of properties of subentropy, paralleling the well-developed analogous theory for von Neumann entropy. Further, we show that subentropy is a lower bound for min-entropy. We introduce a notion of conditional subentropy and show that it can be used to provide an upper bound for the guessing probability of any classical-quantum state of two qubits; we conjecture that the bound applies also in higher dimensions. Finally, we give an operational interpretation of subentropy within classical information theory

  10. Average nuclear surface properties

    International Nuclear Information System (INIS)

    Groote, H. von.

    1979-01-01

    The definition of the nuclear surface energy is discussed for semi-infinite matter. This definition is extended also for the case that there is a neutron gas instead of vacuum on the one side of the plane surface. The calculations were performed with the Thomas-Fermi Model of Syler and Blanchard. The parameters of the interaction of this model were determined by a least squares fit to experimental masses. The quality of this fit is discussed with respect to nuclear masses and density distributions. The average surface properties were calculated for different particle asymmetry of the nucleon-matter ranging from symmetry beyond the neutron-drip line until the system no longer can maintain the surface boundary and becomes homogeneous. The results of the calculations are incorporated in the nuclear Droplet Model which then was fitted to experimental masses. (orig.)

  11. Sensitizing properties of proteins

    DEFF Research Database (Denmark)

    Poulsen, Lars K.; Ladics, Gregory S; McClain, Scott

    2014-01-01

    The scope of allergy risk is diverse considering the myriad ways in which protein allergenicity is affected by physiochemical characteristics of proteins. The complexity created by the matrices of foods and the variability of the human immune system add additional challenges to understanding...... the relationship between sensitization potential and allergy disease. To address these and other issues, an April 2012 international symposium was held in Prague, Czech Republic, to review and discuss the state-of-the-science of sensitizing properties of protein allergens. The symposium, organized by the Protein...... Allergenicity Technical Committee of the International Life Sciences Institute's Health and Environmental Sciences Institute, featured presentations on current methods, test systems, research trends, and unanswered questions in the field of protein sensitization. A diverse group of over 70 interdisciplinary...

  12. Chemical properties of mendelevium

    International Nuclear Information System (INIS)

    Hulet, E.K.

    1980-01-01

    The isotope 256 Md is nearly always employed for chemical studies of this element. This nuclide can be made by bombardment of fractions of a microgram of 254 Es with intense alpha-particle beams which will produce about 10 6 atoms of 256 Md with a half-life of 77 minutes. Even with the most intense ion beams and the largest available quantities of target isotope, about 10 6 atoms at a time is all the Md that can be produced for chemical studies. This lack of sufficient sample size coupled with the very short lifetimes of the few atoms produced has severly restricted the gathering and broadening of our knowledge concerning the properties of Md and the heavier elements. To illustrate, the literature contains a mere eleven references to the chemical studies of Md, and none of these deal with bulk properties associated with element found in solid phases. Some of these findings are: Md was found to be more volatile than other actinide metals which lead to the belief that it is divalent in the metallic state; separation of Md from the other actinides can be accomplished either by reduction of Md to the divalent state or by chromatographic separations with Md remaining in the tripositive state; extraction of Md with bis(2-ethylhexyl)phosphoric acid is much poorer than the extraction of the neighboring tripositive actinides; attempts to oxidize Md wih sodium bismuthate failed to show any evidence of Md 4+ ; standard reduction potential of Md 3+ was found to be close to -0.1 volt; Md 3+ can be reduced to Md(Hg) by sodium amalgams and by electrolysis; the electrochemical behavior of Md is very similar to that of Fm and can be summarized in the equation, Md 2+ + 2e - = Md(Hg), and E 0 = 1.5 V

  13. Chemical properties of mendelevium

    International Nuclear Information System (INIS)

    Hulet, E.K.

    1980-11-01

    Even with the most intense ion beams and the largest available quantities of target isotope, about 10 6 atoms at a time is all the Md that can be produced for chemical studies. This lack of sufficient sample size coupled with the very short lifetimes of the few atoms produced has severely restricted the gathering and the broadness of our knowledge concerning the properties of Md and the heavier elements. To illustrate, the literature contains a mere eleven references to the chemical studies of Md, and none of these deal with bulk properties associated with the element bound in solid phases. Some of these findings are: Md was found to be more volatile than other actinide metals which lead to the belief that it is divalent in the metallic state; separation of Md from the other actinides can be accomplished either by reduction of Md 3+ to the divalent state or by chromatographic separations with Md remaining in the tripositive state; extraction of Md 2+ with bis(2-ethylhexyl)phosphoric acid is much poorer than the extraction of the neighboring tripositive actinides; attempts to oxidize Md 3+ with sodium bismuthate failed to show any evidence for Md 4+ ; reduction potential of Md 3+ was found to be close to -0.1 volt; Md 3+ can be reduced to Md(Hg) by sodium amalgams and by electrolysis; the electrochemical behavior of Md is very similar to that of Fm and can be summarized in the equation, Md 2+ + 2e - = Md(Hg) and E 0 = -1.50 V.; and Md cannot be reduced to a monovalent ion with Sm 2+

  14. Properties of scintillator solutes

    International Nuclear Information System (INIS)

    Fluornoy, J.M.

    1998-06-01

    This special report summarizes measurements of the spectroscopic and other properties of the solutes that were used in the preparation of several new liquid scintillators developed at EG and G/Energy Measurements/Santa Barbara Operations (the precursor to Bechtel Nevada/Special Technologies Laboratory) on the radiation-to-light converter program. The data on the individual compounds are presented in a form similar to that used by Prof. Isadore Berlman in his classic handbook of fluorescence spectra. The temporal properties and relative efficiencies of the new scintillators are presented in Table 1, and the efficiencies as a function of wavelength are presented graphically in Figure 1. In addition, there is a descriptive glossary of the abbreviations used herein. Figure 2 illustrates the basic structures of some of the compounds and of the four solvents reported in this summary. The emission spectra generally exhibit more structure than the absorption spectra, with the result that the peak emission wavelength for a given compound may lie several nm away from the wavelength, λ avg , at the geometric center of the emission spectrum. Therefore, the author has chosen to list absorption peaks, λ max , and emission λ avg values in Figures 3--30, as being most illustrative of the differences between the compounds. The compounds, BHTP, BTPB, ADBT, and DPTPB were all developed on this program. P-terphenyl, PBD, and TPB are commercially available blue emitters. C-480 and the other longer-wavelength emitters are laser dyes available commercially from Exciton Corporation. 1 ref., 30 figs

  15. Description of nuclear properties

    International Nuclear Information System (INIS)

    Faessler, A.

    1991-01-01

    The lectures want to give a survey about new developments in the description of nuclei. In a first chapter we try to derive nuclear properties from the basis theory of quantum chromodynamics. This is not rigorously possible. There are still many cracks in the bridge between QCD and nuclear structure. The basic ingredient for nuclear structure calculations is the nucleon-nucleon interaction. We shall discuss the nucleon-nucleon interaction in a quark model. In a further chapter we discuss the way to come from a bare nucleon-nucleon interaction in free space to an effective nucleon-nucleon interaction in a limited model space for nuclear structure calculations. Such nuclear structure calculations can be done as shell model calculations. But they are due to the large number of configurations limited to light nuclei. We discuss possibilities (MONSTER and VAMPIR) to enlarge the model space for medium heavy and heavy nuclei. As the example of the low lying isovector 1 + states we discuss collective models (Bohr - Mottelson Model, interacting Boson Model) with proton and neutron degrees of freedom. The same states can also be described microscopically with the Quasi-Particle Random Phase Approximation (QRPA). We discuss the removal of spurious states in RPA. We also discuss the calculation of form factors and compare with inelastic electron scattering data. Finally we apply QRPA to the double-beta decay. Grand unified models predict, that the neutrino is identical with his antiparticle, that it has a finite mass and a weak right-handed interaction. If these properties are found the standard model of the strong and the electro-weak interaction can not be correct. Presently we can only derive from lower limits of the half lives of neutrinoless double-beta decays upper limits of the neutrino mass and of the right-handedness of the weak interaction and lower limits of the mass of the right handed heavy vector boson, if a specific grand unified model is given. (author)

  16. Volatility Properties of Polonium

    International Nuclear Information System (INIS)

    Eichler, B.

    2002-06-01

    Thermodynamical constants to describe evaporation processes of polonium are summarized and critically discussed. Additionally, systematic changes of the properties of the chalcogenes are analyzed, empirical correlations are proofed and cyclic processes are balanced. Accordingly, the existing values of entropies for polonium are acceptable. Questionable, however, are those values of enthalpies, which have been deduced from results of the experimental investigations of the vapor pressure temperature dependency, of the melting point, and of the boiling temperatures. Technical difficulties and possible error sources of the measurements resulting from the radioactive decay properties of 210 Po are discussed. Using extrapolative standard enthalpies and entropies as well as their temperature dependency, the equilibrium partial pressure of the monomeric and dimeric polonium above the pure condensed phase and the equilibrium constant of the dimerization reaction in the gas phase are calculated: log p/pa Po (g) = (11.797 ± 0.024) -(9883.4 ± 9.5)/T (for T = 298-600 K); = (10.661 ± 0.057) - (9328.4 ± 4.9)/T (for T = 500-1300 K); log p/pa Po 2 (g) = (13.698 ± 0.049) - (8592.3 ± 19.6)/T (for T = 298-600 K); = (11.424 ± 0.124) - (7584.1 ± 98.1)/T (for T = 500-1300 K); log K (dim) = (-4.895 ± 0.012) + (11071 ± 6)/T. According to these calculations and in contrast to other works, polonium evaporates in the entire temperature range between 298 and 1300 K in the dimeric state. Hence, 'latent heats' of the volatilization processes are clearly larger compared to literature data. Especially in the temperature range of the solid polonium the calculated vapor pressure curve shifts significantly to lower values, whereas the boiling point was almost reproduced by the calculation. The results of the extrapolation for the standard enthalpy of the gaseous monomeric polonium and the dimerization enthalpy ΔH 0 298 Po (g) = 188.9 kJ/mol and ΔH 0 298 (form) Po 2 (g) = 211.5 kJ/mol are

  17. Electromagnetic properties of baryons

    Energy Technology Data Exchange (ETDEWEB)

    Haupt, C.

    2006-07-01

    Static observables of bound state systems in field theoretic descriptions are usually extracted from form factors in the limit of vanishing squared four-momentum transfer of the probing exchange particle. On the other hand, static properties in nonrelativistic quantum mechanics can be formulated by means of expectation values involving essentially scalar products of wave functions. The main objective of this work is to show that a synthesis of both approaches is indeed possible - at least if certain restrictions are made to the kind of interactions between the constituents of the bound system - leading to new insights into the structure of static properties. The focus lies especially on the charge radii and magnetic moments of baryons described within a covariant constituent quark model having its field theoretic foundations in the Bethe-Salpeter equation. The current matrix element in the Breit frame between the vertex functions is derived. The charge radius and magnetic moment of a bound three-fermion system is then derived by starting from their usual definition from form factors and in case of the charge radius also from the well-known radius of a charge distribution in classical electrodynamics. In both cases the static limit at the photon point is taken analytically and subsequently the integration over the relative energy variables is done. Finally the vertex functions are replaced by Salpeter amplitudes and the expression is symmetrized over the three fermions. The final results express the charge radius and magnetic moment of the three-fermion system as expectation values with respect to Salpeter amplitudes. The numerical implementation of the analytic results is done within a covariant constituent quark model with quark confinement and a residual instanton interaction accounting for the fine structure of the observed mass spectra. The Salpeter amplitudes which where obtained by solving the Salpeter equation are used to compute the expectation values of

  18. Diameter 2 properties and convexity

    Czech Academy of Sciences Publication Activity Database

    Abrahamsen, T. A.; Hájek, Petr Pavel; Nygaard, O.; Talponen, J.; Troyanski, S.

    2016-01-01

    Roč. 232, č. 3 (2016), s. 227-242 ISSN 0039-3223 R&D Projects: GA ČR GA16-07378S Institutional support: RVO:67985840 Keywords : diameter 2 property * midpoint locally uniformly rotund * Daugavet property Subject RIV: BA - General Mathematics Impact factor: 0.535, year: 2016 https://www.impan.pl/pl/wydawnictwa/czasopisma-i-serie-wydawnicze/studia- mathematica /all/232/3/91534/diameter-2-properties-and-convexity

  19. Profiling property criminals in Turkey.

    Science.gov (United States)

    Içli, Tülin Günsen; Seydioğullari, Ibrahim; Tatlidil, Hüseyin; Coban, Sevgi; Sever, Hanifi; Süeroğlu, Unal

    2010-08-01

    The main aim of this research is to develop a profile of a thief. Through a comprehensive survey of property crime suspects arrested in the city of Ankara between 2004 and 2005, the authors have attempted to determine the socioeconomic qualities of those involved in these forms of property crimes. Results of the study show that property crimes are a consequence of low education, lack of occupational skills, and alcohol and drug addiction on the part of the offenders. Because of these factors, theft becomes a way of life for offenders after their first act of property crime.

  20. Thermophysical properties of uranium dioxide

    International Nuclear Information System (INIS)

    Fink, J.K.

    2000-01-01

    Experimental data on thermodynamic and transport properties of solid and liquid UO 2 have been reviewed and analyzed to obtain consistent equations for the thermophysical properties. Thermodynamic properties that have been assessed include enthalpy, heat capacity, enthalpy of fusion, thermal expansion, density, surface tension and vapor pressure. Transport properties that have been assessed are thermal diffusivity, thermal conductivity, viscosity, emissivity and optical constants. The assessments include a review of the experiments and data, review of previous recommendations, analysis of data to obtain new recommendations, determination of uncertainties in the recommended values, and comparisons of new recommendations with data and previous recommendations

  1. Mechanical properties of ceramics

    CERN Document Server

    Pelleg, Joshua

    2014-01-01

    This book discusses the mechanical properties of ceramics and aims to provide both a solid background for undergraduate students, as well as serving as a text to bring practicing engineers up to date with the latest developments in this topic so they can use and apply these to their actual engineering work.  Generally, ceramics are made by moistening a mixture of clays, casting it into desired shapes and then firing it to a high temperature, a process known as 'vitrification'. The relatively late development of metallurgy was contingent on the availability of ceramics and the know-how to mold them into the appropriate forms. Because of the characteristics of ceramics, they offer great advantages over metals in specific applications in which hardness, wear resistance and chemical stability at high temperatures are essential. Clearly, modern ceramics manufacturing has come a long way from the early clay-processing fabrication method, and the last two decades have seen the development of sophisticated technique...

  2. Electronic properties of fullerenes

    Energy Technology Data Exchange (ETDEWEB)

    Kuzmany, H [ed.; Vienna Univ. (Austria). Inst. fuer Festkoerperphysik; Fink, J [ed.; Kernforschungszentrum Karlsruhe GmbH (Germany). Inst. fuer Nukleare Festkoerperphysik; Mehring, M [ed.; Stuttgart Univ. (Germany). Physikalisches Teilinstitut 2; Roth, S [ed.; Max-Planck-Institut fuer Festkoerperforschung, Stuttgart (Germany)

    1993-01-01

    Since 1991, research in the field of organic carbon materials has developed at a rapid pace due to the advent of the fullerenes and related materials. These forms of carbon are considered as a missing link between the previously discussed electroactive polymers and the oxidic superconductors. It was therefore challenging to select this topic for an international winter school in Kirchberg. Although still in its infancy, research on the physics and chemistry of fullerenes and related compounds has already led to a wealth of results, which was reflected in the wide range of topics covered and the numerous discussions which emerged at the meeting. For C[sub 60] itself, preparation methods and crystal growth techniques continue to evolve, while the understanding of the electronic and structural properties of its solid state continues to pose challenges to experimental and theoretical physicists. The ever-expanding range of higher fullerens and related materials, such as nanotubes and onions, poses a daunting but exciting task for researchers. For synthetic chemists, fullerenes represent the basis of a whole new range of synthetic compounds. The prospect of a periodic table of endohedral fullerene complexes has been discussed, and exohedrally complexed metal-fullerenes have already attracted the attention of physicists. The first endohedral materials are now available. (orig.)

  3. Thermotropic properties of phosphatidylethanols.

    Science.gov (United States)

    Bondar, O P; Rowe, E S

    1996-09-01

    Phosphatidylethanol is formed when ethanol substitutes in the transphosphatidylation reaction catalyzed by phospholipase D. The structural and thermotropic properties of dipalmitoylphosphatidylethanol and dimyristoylphosphatidylethanol have been studied using differential scanning calorimetry, fluorescence spectroscopy, and 31P nuclear magnetic resonance. These lipids exist in a bilayer phase with no indication of nonbilayer phase formation, as shown by 31P nuclear magnetic resonance. It was found that the phase behavior of these phospholipids before and during the main chain melting transition is different in 50 mM Tris buffer compared to salt solutions. The phase transition behavior and the 6-propionyl-2-(dimethylamino)naphthalene (Prodan) fluorescence spectra for both lipids are consistent with the formation of the interdigitated gel phase under certain conditions. Both lipids become interdigitated in Tris-HCl, and ethanol enhances the formation of this phase. Comparative studies of the 6-propionyl-2-(dimethylamino)naphthalene spectra in dipalmitoylphosphatidylglycerol, dielaidoylphosphatidylethanolamine, and dipalmitoylphosphatidylcholine further elucidate the value and limitations of this probe as a diagnostic tool for lipid structure.

  4. Studies of MCP properties

    International Nuclear Information System (INIS)

    Lehmann, A; Britting, A; Eyrich, W; Uhlig, F

    2009-01-01

    Cherenkov detectors of the DIRC type will be used for the particle identification of the PANDA experiment at FAIR. Because of their advantageous properties inside a magnetic field micro-channel plate (MCP) photomultipliers (PMT) are very attractive photon sensors for the two PANDA DIRCs. Various types of MCP-PMTs were investigated. Their gains and their time resolutions were measured as a function of the magnitude and the direction of a magnetic field. It was found that with a pore size of ≤ 10 μm efficient single photon detection is possible even at 2 Tesla if the field direction is close to parallel to the PMT axis. The gain of most of the studied MCP-PMTs remains stable up to a photon density of roughly 1 MHz/cm 2 , while the new Hamamatsu R10754-00-L4 can stand rates of about 10 MHz/cm 2 before the gain starts decreasing. The time resolution of all investigated MCP-PMTs was better than 50 ps (σ). The response of the multi-anode MCP-PMTs was scanned as a function of the position of the photo cathode plane in particular to measure the crosstalk among adjacent pixels. Most of the sensors show a satisfactory behavior.

  5. Beneficial Properties of Probiotics

    Science.gov (United States)

    Shi, Lye Huey; Balakrishnan, Kunasundari; Thiagarajah, Kokila; Mohd Ismail, Nor Ismaliza; Yin, Ooi Shao

    2016-01-01

    Probiotics are live microorganisms that can be found in fermented foods and cultured milk, and are widely used for the preparation of infant food. They are well-known as “health friendly bacteria”, which exhibit various health beneficial properties such as prevention of bowel diseases, improving the immune system, for lactose intolerance and intestinal microbial balance, exhibiting antihypercholesterolemic and antihypertensive effects, alleviation of postmenopausal disorders, and reducing traveller’s diarrhoea. Recent studies have also been focused on their uses in treating skin and oral diseases. In addition to that, modulation of the gut-brain by probiotics has been suggested as a novel therapeutic solution for anxiety and depression. Thus, this review discusses on the current probiotics-based products in Malaysia, criteria for selection of probiotics, and evidences obtained from past studies on how probiotics have been used in preventing intestinal disorders via improving the immune system, acting as an antihypercholesterolemic factor, improving oral and dermal health, and performing as anti-anxiety and anti-depressive agents. PMID:27688852

  6. Antiviral properties of photosensitizers

    International Nuclear Information System (INIS)

    Hudson, J.B.; Towers, G.H.N.

    1988-01-01

    We have studied the antiviral properties of three different groups of photo-sensitizers, viz. (i) various furyl compounds; (ii) β-carboline alkaloids; (iii) thiophenes and their acetylene derivatives. In general the antiviral potency of the furyl compounds correlated with their ability to produce DNA photoadducts. Among the naturally occurring β-carboline alkaloids, harmine was considerably more potent (in the presence of long wavelength UV radiation, UVA) than several other harmane-related compounds. Slight alterations in chemical structure had profound effects on their antiviral activities. Harmine was shown to inactivate the DNA-virus murine cytomegalovirus (MCMV) by inhibiting viral gene expression, although other targets may also exist. Several eudistomins, carboline derivatives isolated from a tunicate, were also photoactive against viruses. Various plant thiophenes and polyacetylenes were studied in detail. These compounds also required UVA for antiviral activity, and some of them were extremely potent against viruses with membranes, e.g. α-terthienyl, which showed significant activity at only 10 -5 μg/ml. When MCMV had been treated with α-terthienyl plus UVA, the virus retained its integrity and penetrated cells normally; but the virus did not replicate. (author)

  7. Electronic properties of fullerenes

    International Nuclear Information System (INIS)

    Kuzmany, H.

    1993-01-01

    Since 1991, research in the field of organic carbon materials has developed at a rapid pace due to the advent of the fullerenes and related materials. These forms of carbon are considered as a missing link between the previously discussed electroactive polymers and the oxidic superconductors. It was therefore challenging to select this topic for an international winter school in Kirchberg. Although still in its infancy, research on the physics and chemistry of fullerenes and related compounds has already led to a wealth of results, which was reflected in the wide range of topics covered and the numerous discussions which emerged at the meeting. For C 60 itself, preparation methods and crystal growth techniques continue to evolve, while the understanding of the electronic and structural properties of its solid state continues to pose challenges to experimental and theoretical physicists. The ever-expanding range of higher fullerens and related materials, such as nanotubes and onions, poses a daunting but exciting task for researchers. For synthetic chemists, fullerenes represent the basis of a whole new range of synthetic compounds. The prospect of a periodic table of endohedral fullerene complexes has been discussed, and exohedrally complexed metal-fullerenes have already attracted the attention of physicists. The first endohedral materials are now available. (orig.)

  8. Properties of chipboard

    International Nuclear Information System (INIS)

    Baryeh, E.A.

    1993-03-01

    Density, permeability, porosity, water absorption and swelling characteristics have been assessed for chipboard made out of saw dust and an adhesive. Results indicated that permeability increases as porosity increases and both decrease with increase in board density. Permeability, 1/α and porosity, p were found to relate to the density, ρ as follows: 1/α = Ae aρ and p = Be bρ while porosity and permeability were found to follow the relation: p = C(1/α) d . It was also found that the lower the board density, the higher its water absorption and swelling. Thermal conductivity, specific heat and calorific value were also assessed. Results revealed that thermal conductivity increases nonlinearly with increasing density, while it decreases linearly with increasing porosity. Specific heat also increases linearly with increasing density and temperature. However, calorific value was found to be independent of density. Mechanical properties increase as the density increases except for the penetration depth. It was found that the tensile strength, modulus of rupture, shear strength, hardness, resistance to cutting and impact strength vary linearly with the density, while the degree of elasticity has a nonlinear relation with the density. The board is generally stronger in bending than in compression and tension in descending order of strength. (author). 18 refs, figs

  9. Properties of spiral resonators

    International Nuclear Information System (INIS)

    Haeuser, J.

    1989-10-01

    The present thesis deals with the calculation and the study of the application possibilities of single and double spiral resonators. The main aim was the development and the construction of reliable and effective high-power spiral resonators for the UNILAC of the GSI in Darmstadt and the H - -injector for the storage ring HERA of DESY in Hamburg. After the presentation of the construction and the properties of spiral resonators and their description by oscillating-circuit models the theoretical foundations of the bunching are presented and some examples of a rebuncher and debuncher and their influence on the longitudinal particle dynamics are shown. After the description of the characteristic accelerator quantities by means of an oscillating-circuit model and the theory of an inhomogeneous λ/4 line it is shown, how the resonance frequency and the efficiency of single and double spiral resonators can be calculated from the geometrical quantities of the structure. In the following the dependence of the maximal reachable resonator voltage in dependence on the gap width and the surface of the drift tubes is studied. Furthermore the high-power resonators are presented, which were built for the different applications for the GSI in Darmstadt, DESY in Hamburg, and for the FOM Institute in Amsterdam. (orig./HSI) [de

  10. Thermophysical properties of nanofluids.

    Science.gov (United States)

    Rudyak, Valery Ya; Minakov, Andrey V

    2018-01-31

    This paper discusses the current state of knowledge of the thermophysical properties of nanofluids. The viscosity, thermal conductivity and heat transfer of nanofluids are considered. Experimental and molecular dynamics data are presented. It is shown that viscosity and thermal conductivity of nanofluids generally cannot be described by classical theories. The transport coefficients of nanofluids depend not only on the volume concentration of the particles but also on their size and material. The viscosity increases with decreasing the particle size while the thermal conductivity increases with increasing the particle size. The reasons for this behavior are discussed. The heat transfer coefficient is determined by the nanofluid flow mode (laminar or turbulent). The use of the nanofluids as a coolant significantly affects the magnitude of the heat transfer coefficient. In laminar flow the heat transfer coefficient of nanofluids in all cases is much more than that of base fluids. It is shown that a 2%-nanofluid intensifies the heat exchange more than twice compared to water. The effect of using nanofluids in turbulent mode depends not only on the thermal conductivity of the nanofluid, but also on its viscosity.

  11. Fundamental Properties of Salts

    Energy Technology Data Exchange (ETDEWEB)

    Toni Y Gutknecht; Guy L Fredrickson

    2012-11-01

    Thermal properties of molten salt systems are of interest to electrorefining operations, pertaining to both the Fuel Cycle Research & Development Program (FCR&D) and Spent Fuel Treatment Mission, currently being pursued by the Department of Energy (DOE). The phase stability of molten salts in an electrorefiner may be adversely impacted by the build-up of fission products in the electrolyte. Potential situations that need to be avoided, during electrorefining operations, include (i) fissile elements build up in the salt that might approach the criticality limits specified for the vessel, (ii) electrolyte freezing at the operating temperature of the electrorefiner due to changes in the liquidus temperature, and (iii) phase separation (non-homogenous solution). The stability (and homogeneity) of the phases can be monitored by studying the thermal characteristics of the molten salts as a function of impurity concentration. Simulated salt compositions consisting of the selected rare earth and alkaline earth chlorides, with a eutectic mixture of LiCl-KCl as the carrier electrolyte, were studied to determine the melting points (thermal characteristics) using a Differential Scanning Calorimeter (DSC). The experimental data were used to model the liquidus temperature. On the basis of the this data, it became possible to predict a spent fuel treatment processing scenario under which electrorefining could no longer be performed as a result of increasing liquidus temperatures of the electrolyte.

  12. 31 CFR 515.311 - Property; property interests.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Property; property interests. 515.311 Section 515.311 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... way of limitation, money, checks, drafts, bullion, bank deposits, savings accounts, debts...

  13. Electromagnetic properties of neutrinos

    International Nuclear Information System (INIS)

    Ould-Saada, F.

    1996-01-01

    Electromagnetic properties of neutrinos and their implications are discussed, and the experimental situation summarised. Spin precession in solar magnetic fields presents a solution of the solar neutrino problem. A magnetic moment, μ ν , of the order of 10 -11 μ B would be needed. In the simplest extension of the standard model, with no-vanishing neutrino masses, dipole moment interactions are allowed through higher order processes. A neutrino mass of ≅10 eV would give μ ν ≅10 -18 μ B , much smaller than the present experimental upper limit of 2x10 -10 μ B . Although model-dependent, upper bounds on dipole moments from astrophysics and cosmology are 10 to 100 times more stringent. Any values of μ ν , larger than the SM predictions, would then signal the onset of new physics. Among the processes sensitive to the magnetic moment, νe - scattering presents two advantages: it is a pure weak, theoretically well understood process, and the recoil electron can be easily measured. A hypothetical electromagnetic contribution to the cross-section would dominate at low energies. A low background detector, MUNU, being built at the Bugey nuclear reactor is presented.It is based on a gas TPC, surrounded by a scintillator. The threshold on the electron recoil energy can be set very low, around 500 keV, giving the experiment a good sensitivity to the magnetic moment of the ν e , extending down to 2x10 -11 μ B . (author) 15 figs., 5 tabs., 96 refs

  14. REACTOR GROUT THERMAL PROPERTIES

    Energy Technology Data Exchange (ETDEWEB)

    Steimke, J.; Qureshi, Z.; Restivo, M.; Guerrero, H.

    2011-01-28

    Savannah River Site has five dormant nuclear production reactors. Long term disposition will require filling some reactor buildings with grout up to ground level. Portland cement based grout will be used to fill the buildings with the exception of some reactor tanks. Some reactor tanks contain significant quantities of aluminum which could react with Portland cement based grout to form hydrogen. Hydrogen production is a safety concern and gas generation could also compromise the structural integrity of the grout pour. Therefore, it was necessary to develop a non-Portland cement grout to fill reactors that contain significant quantities of aluminum. Grouts generate heat when they set, so the potential exists for large temperature increases in a large pour, which could compromise the integrity of the pour. The primary purpose of the testing reported here was to measure heat of hydration, specific heat, thermal conductivity and density of various reactor grouts under consideration so that these properties could be used to model transient heat transfer for different pouring strategies. A secondary purpose was to make qualitative judgments of grout pourability and hardened strength. Some reactor grout formulations were unacceptable because they generated too much heat, or started setting too fast, or required too long to harden or were too weak. The formulation called 102H had the best combination of characteristics. It is a Calcium Alumino-Sulfate grout that contains Ciment Fondu (calcium aluminate cement), Plaster of Paris (calcium sulfate hemihydrate), sand, Class F fly ash, boric acid and small quantities of additives. This composition afforded about ten hours of working time. Heat release began at 12 hours and was complete by 24 hours. The adiabatic temperature rise was 54 C which was within specification. The final product was hard and displayed no visible segregation. The density and maximum particle size were within specification.

  15. Electromagnetic properties of neutrinos

    Energy Technology Data Exchange (ETDEWEB)

    Ould-Saada, F [Zurich Univ. (Switzerland). Inst. fuer Physik

    1996-11-01

    Electromagnetic properties of neutrinos and their implications are discussed, and the experimental situation summarised. Spin precession in solar magnetic fields presents a solution of the solar neutrino problem. A magnetic moment, {mu}{sub {nu}}, of the order of 10{sup -11} {mu}{sub B} would be needed. In the simplest extension of the standard model, with no-vanishing neutrino masses, dipole moment interactions are allowed through higher order processes. A neutrino mass of {approx_equal}10 eV would give {mu}{sub {nu}}{approx_equal}10{sup -18} {mu}{sub B}, much smaller than the present experimental upper limit of 2x10{sup -10} {mu}{sub B}. Although model-dependent, upper bounds on dipole moments from astrophysics and cosmology are 10 to 100 times more stringent. Any values of {mu}{sub {nu}}, larger than the SM predictions, would then signal the onset of new physics. Among the processes sensitive to the magnetic moment, {nu}e{sup -} scattering presents two advantages: it is a pure weak, theoretically well understood process, and the recoil electron can be easily measured. A hypothetical electromagnetic contribution to the cross-section would dominate at low energies. A low background detector, MUNU, being built at the Bugey nuclear reactor is presented.It is based on a gas TPC, surrounded by a scintillator. The threshold on the electron recoil energy can be set very low, around 500 keV, giving the experiment a good sensitivity to the magnetic moment of the {nu}{sub e}, extending down to 2x10{sup -11} {mu}{sub B}. (author) 15 figs., 5 tabs., 96 refs.

  16. Radiative properties of clouds

    International Nuclear Information System (INIS)

    Twomey, S.

    1993-01-01

    The climatic effects of condensation nuclei in the formation of cloud droplets and the subsequent role of the cloud droplets as contributors to the planetary short-wave albedo is emphasized. Microphysical properties of clouds, which can be greatly modified by the degree of mixing with cloud-free air from outside, are discussed. The effect of clouds on visible radiation is assessed through multiple scattering of the radiation. Cloudwater or ice absorbs more with increasing wavelength in the near-infrared region, with water vapor providing the stronger absorption over narrower wavelength bands. Cloud thermal infrared absorption can be solely related to liquid water content at least for shallow clouds and clouds in the early development state. Three-dimensional general circulation models have been used to study the climatic effect of clouds. It was found for such studies (which did not consider variations in cloud albedo) that the cooling effects due to the increase in planetary short-wave albedo from clouds were offset by heating effects due to thermal infrared absorption by the cloud. Two permanent direct effects of increased pollution are discussed in this chapter: (a) an increase of absorption in the visible and near infrared because of increased amounts of elemental carbon, which gives rise to a warming effect climatically, and (b) an increased optical thickness of clouds due to increasing cloud droplet number concentration caused by increasing cloud condensation nuclei number concentration, which gives rise to a cooling effect climatically. An increase in cloud albedo from 0.7 to 0.87 produces an appreciable climatic perturbation of cooling up to 2.5 K at the ground, using a hemispheric general circulation model. Effects of pollution on cloud thermal infrared absorption are negligible

  17. Congruence properties of induced representations

    DEFF Research Database (Denmark)

    Mayer, Dieter; Momeni, Arash; Venkov, Alexei

    In this paper we study representations of the projective modular group induced from the Hecke congruence group of level 4 with Selberg's character. We show that the well known congruence properties of Selberg's character are equivalent to the congruence properties of the induced representations...

  18. Properties of Bipolar Fuzzy Hypergraphs

    OpenAIRE

    Akram, M.; Dudek, W. A.; Sarwar, S.

    2013-01-01

    In this article, we apply the concept of bipolar fuzzy sets to hypergraphs and investigate some properties of bipolar fuzzy hypergraphs. We introduce the notion of $A-$ tempered bipolar fuzzy hypergraphs and present some of their properties. We also present application examples of bipolar fuzzy hypergraphs.

  19. Property and Human Genetic Information

    DEFF Research Database (Denmark)

    Nielsen, Morten Ebbe Juul; Kongsholm, Nana Cecilie Halmsted; Schovsbo, Jens Hemmingsen

    2018-01-01

    Do donors (of samples from which genetic information is derived) have some sort of pre-legal (moral) or legal property right tothat information? In this paper, we address this question from both a moral philosophical and a legal point of view. We argue thatphilosophical theories about property do...

  20. Testing properties of generic functions

    NARCIS (Netherlands)

    Jansson, P.; Jeuring, J.T.; Cabenda, L.; Engels, G.; Kleerekoper, J.; Mak, S.; Overeem, M.; Visser, Kees

    2006-01-01

    Software testing is an important part of the software devel- opment process. Testing comes in many flavours: unit testing, property testing, regression testing, contract checking, etc. QuickCheck is proba- bly one of the most advanced tools for testing properties of functional programs. It

  1. Property rights institutions and investment

    OpenAIRE

    Saleh, Jahangir

    2004-01-01

    This paper examines the channels through which alternative property rights institutions affect investment. These institutions are defined by a society's enforced laws, regulations, governance mechanisms and norms concerning the use of resources. A transaction cost framework is used to analyze the incentive impact of various types of property rights, liability rules, and rules regarding con...

  2. Testing properties of generic functions

    NARCIS (Netherlands)

    Jansson, P.; Jeuring, J.T.; Cabenda, L.; Engels, G.; Kleerekoper, J.; Mak, S.; Overeem, M.; Visser, Kees

    2007-01-01

    A datatype-generic function is a family of functions indexed by (the structure of) a type. Examples include equality tests, maps and pretty printers. Property based testing tools like QuickCheck and Gast support the de¯nition of properties and test-data generators, and they check if a

  3. Properties of auxiliary filtering materials

    Energy Technology Data Exchange (ETDEWEB)

    Rudenko, L.I.; Sklyar, V.T.

    1981-01-01

    The authors have studied the physicochemical and filtering properties of the perlites FP-1 and FP-2, kieselguhr, diatomite, asbestos, wood pulp, and the diatomite powders Spidplace and Saperaid. They propose a classification for filtering materials according to their properties when mechanical impurities are being removed from the additives.

  4. Forcing absoluteness and regularity properties

    NARCIS (Netherlands)

    Ikegami, D.

    2010-01-01

    For a large natural class of forcing notions, we prove general equivalence theorems between forcing absoluteness statements, regularity properties, and transcendence properties over L and the core model K. We use our results to answer open questions from set theory of the reals.

  5. Porous Materials - Structure and Properties

    DEFF Research Database (Denmark)

    Nielsen, Anders

    1997-01-01

    The paper presents some viewpoints on the description of the pore structure and the modelling of the properties of the porous building materials. Two examples are given , where it has been possible to connect the pore structure to the properties: Shrinkage of autoclaved aerated concrete...

  6. Ultracold gas shows 'lopsided' properties

    CERN Multimedia

    2002-01-01

    "Duke University researchers have created an ultracold gas that has the startling property of bursting outward in a preferred direction when released. According to the researchers, studying the properties of the "lopsided" gas will yield fundamental insights into how matter holds itself together at the subatomic level" (1 page).

  7. Thermodynamic properties of cryogenic fluids

    CERN Document Server

    Leachman, Jacob; Lemmon, Eric; Penoncello, Steven

    2017-01-01

    This update to a classic reference text provides practising engineers and scientists with accurate thermophysical property data for cryogenic fluids. The equations for fifteen important cryogenic fluids are presented in a basic format, accompanied by pressure-enthalpy and temperature-entropy charts and tables of thermodynamic properties. It begins with a chapter introducing the thermodynamic relations and functional forms for equations of state, and goes on to describe the requirements for thermodynamic property formulations, needed for the complete definition of the thermodynamic properties of a fluid. The core of the book comprises extensive data tables and charts for the most commonly-encountered cryogenic fluids. This new edition sees significant updates to the data presented for air, argon, carbon monoxide, deuterium, ethane, helium, hydrogen, krypton, nitrogen and xenon. The book supports and complements NIST’s REFPROP - an interactive database and tool for the calculation of thermodynamic propertie...

  8. Debates on Intellectual Property Rights

    Directory of Open Access Journals (Sweden)

    Paula – Angela VIDRAŞCU

    2014-09-01

    Full Text Available This paper supports the understanding of the definition of intellectual property rights and strong connection with intangible assets and, on the other hand, provides a brief presentation of the organizations supporting the protection of such rights. The essential aim of this article is represented by the detailed information obtained as a result of research carried out in order to define, identify and study the application of IPR in general and especially in our country. At the end of the paper I mentioned what involves protecting intellectual property rights and brought little concerned how our country is perceived to protect such rights. Most often, intellectual property is defined as a formal document of title, like a lease, which means that the property is a legal concept distinct from real property that are actually good without concrete material form. Constitute a special category of assets being perceived as an original creation, derived from creative ideas; has or may have a commercial value due to its contribution to earnings for its owner. The need for protection of intellectual property rights has emerged because of the changes in the contemporary society. The aim and purpose of which is to protect human intelligence product and, at the same time, ensuring that consumers benefit from the use of the attributes of this product. Always remember that the violation of intellectual property rights, causes injury to major economic, signifying a strong threat to the consumers health and safety.

  9. Properties of mathematical objects (Goedel on classes, properties and concepts)

    International Nuclear Information System (INIS)

    Materna, Pavel

    2007-01-01

    In terms of a sufficiently fine-grained theory we should distinguish between classes, properties and concepts. Since properties are best modeled as a kind of non-trivial intensions while mathematical objects are never non-trivial intensions we should not speak about properties of mathematical objects. When we do use the term property in mathematics (as Goedel did) we either mean classes, or the more fine-grained entities to be called concepts. In the latter case concepts have to be defined so that various distinct concepts could identify one and the same object. The notion of construction in transparent intensional logic makes it possible to construe concepts as abstract procedures. At the same time we have to distinguish between this notion and the notion of construction in constructivist systems: the former - unlike the latter - are objective and, therefore, acceptable for a realist

  10. Quantum logics with existence property

    International Nuclear Information System (INIS)

    Schindler, C.

    1991-01-01

    A quantum logic (σ-orthocomplete orthomodular poset L with a convex, unital, and separating set Δ of states) is said to have the existence property if the expectation functionals on lin(Δ) associated with the bounded observables of L form a vector space. Classical quantum logics as well as the Hilbert space logics of traditional quantum mechanics have this property. The author shows that, if a quantum logic satisfies certain conditions in addition to having property E, then the number of its blocks (maximal classical subsystems) must either be one (classical logics) or uncountable (as in Hilbert space logics)

  11. Handbook of organic solvent properties

    CERN Document Server

    Smallwood, Ian

    2012-01-01

    The properties of 72 of the most commonly used solvents are given, tabulated in the most convenient way, making this book a joy for industrial chemists to use as a desk reference. The properties covered are those which answer the basic questions of: Will it do the job? Will it harm the user? Will it pollute the air? Is it easy to handle? Will it pollute the water? Can it be recovered or incinerated? These are all factors that need to be considered at the early stages of choosing a solvent for a new product or process.A collection of the physical properties of most commonly used solvents, their

  12. Properties of conventional contrast media

    International Nuclear Information System (INIS)

    Muetzel, W.

    1981-01-01

    A comprehensive overview is given of the properties of contrast media currently used in computed tomography (CT). The chemical structure of the compounds and the physicochemical properties derived therefrom are described. Emphasis is placed on the importance of the physicochemical properties of contrast media for tolerance and the pharmacokinetic behavior of compounds in the body. An outline is given of the basic ideas governing rational use of contrast media in CT, which result from complex, time-dependent distribution of contrast media in different tissue spaces. (Auth.)

  13. Chemopreventive properties of curcumin analogues ...

    African Journals Online (AJOL)

    Chemopreventive properties of curcumin analogues, ... These compounds .... using microscope with 400 × magnification. APC ... Figure 3: Microscopic images of rat colorectal tissue stained with APC rabbit polyclonal antibody with different.

  14. Optical Properties of Hybrid Nanomaterials

    Indian Academy of Sciences (India)

    owner

    K. George Thomas. Photosciences & Photonics Group. National Institute for Interdisciplinary. Science and Technology (NIIST), CSIR,. Trivandrum- 695 019, INDIA. (kgt@vsnl.com). Optical Properties of Hybrid. Nanomaterials ...

  15. Hull properties in location problems

    DEFF Research Database (Denmark)

    Juel, Henrik; Love, Robert F.

    1983-01-01

    Some properties of the solution set for single and multifacility continuous location problems with lp distances are given. A set reduction algorithm is developed for problems in k-dimensional space having rectangular distances....

  16. Division 1137 property control system

    Energy Technology Data Exchange (ETDEWEB)

    Pastor, D.J.

    1982-01-01

    An automated data processing property control system was developed by Mobile and Remote Range Division 1137. This report describes the operation of the system and examines ways of using it in operational planning and control.

  17. Material properties in complement activation

    DEFF Research Database (Denmark)

    Moghimi, S. Moein; Andersen, Alina Joukainen; Ahmadvand, Davoud

    2011-01-01

    activation differently and through different sensing molecules and initiation pathways. The importance of material properties in triggering complement is considered and mechanistic aspects discussed. Mechanistic understanding of complement events could provide rational approaches for improved material design...

  18. Thermometric Property of a Diode.

    Science.gov (United States)

    Inman, Fred W.; Woodruff, Dan

    1995-01-01

    Presents a simple way to implement the thermometric property of a semiconductor diode to produce a thermometer with a nearly linear dependence upon temperature over a wide range of temperatures. (JRH)

  19. Structural Properties of Ferroelectric Perovskites

    National Research Council Canada - National Science Library

    Vanderbilt, David

    1998-01-01

    Under this research grant, we carried out realistic first-principles computer calculations of the ground-state and finite-temperature structural and dielectric properties of cubic perovskite materials...

  20. HUD Insured Multifamily Properties (NGDA)

    Data.gov (United States)

    Department of Housing and Urban Development — The FHA insured Multifamily Housing portfolio consist primarily of rental housing properties with five or more dwelling units such as apartments or town houses, but...

  1. 7 CFR 654.16 - Property management.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Property management. 654.16 Section 654.16 Agriculture... Property management. Sponsor(s) are to: (a) Use real property acquired in whole or in part with Federal... property (34 CFR part 256). (c) Establish, adopt, and comply with a property management system which meets...

  2. 44 CFR 13.31 - Real property.

    Science.gov (United States)

    2010-10-01

    ... original purchase to the fair market value of the property. However, in those situations where a grantee or... purchase of the real property to the current fair market value of the property. ... LOCAL GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards § 13.31 Real property. (a...

  3. Property Rights, Finance, and Entrepreneurship

    OpenAIRE

    Simon Johnson; John McMillan; Christopher Woodruff

    1999-01-01

    Is investment constrained more by insecure property rights or by limited external finance? For five transition economies in Eastern Europe and the former Soviet Union we find that weak property rights limit the reinvestment of profits in startup ma nufacturing firms. Access to credit does not appear to explain differences in investment. At least in the early stages of post-communist reform, retained earnings appear to have been enough to finance the investments that managers wanted to make.

  4. Molecular Properties through Polarizable Embedding

    DEFF Research Database (Denmark)

    Olsen, Jógvan Magnus Haugaard; Kongsted, Jacob

    2011-01-01

    We review the theory related to the calculation of electric and magnetic molecular properties through polarizable embedding. In particular, we derive the expressions for the response functions up to the level of cubic response within the density functional theory-based polarizable embedding (PE......-DFT) formalism. In addition, we discuss some illustrative applications related to the calculation of nuclear magnetic resonance parameters, nonlinear optical properties, and electronic excited states in solution....

  5. The value of foreclosed property

    OpenAIRE

    Anthony Pennington-Cross

    2004-01-01

    This paper examines the expected price appreciation of distressed property and compares it to the prevailing metropolitan area appreciation rate. The results show that the simple fact that the property is foreclosed indicates that it will be sold at a substantial discount (appreciate less than expected). The magnitude of the discount is sensitive to loan characteristics, legal restrictions, housing market conditions, and the bargaining position of the selling institution.

  6. Physical properties of liquid sodium

    International Nuclear Information System (INIS)

    Alberdi Primicia, J.; Martinez Piquer, T.A.

    1977-01-01

    The molten sodium has been the more accepted coolant for the first generation of FBR, by this reason the knowledge of its technology is needed for the development of the next LMFBR. A series of necessary data for designing sodium liquid systems are given. Tables and graphics about the most important physical sodium properties between 1200-1400 degC are gathered. The results have been obtained from equations that relate the properties with temperature using a Fortran IV program. (author) [es

  7. Electronic properties of semiconductor heterostructures

    International Nuclear Information System (INIS)

    Einevoll, G.T.

    1991-02-01

    Ten papers on the electronic properties of semiconductors and semiconductor heterostructures constitute the backbone of this thesis. Four papers address the form and validity of the single-band effective mass approximation for semiconductor heterostructures. In four other papers properties of acceptor states in bulk semiconductors and semiconductor heterostructures are studied using the novel effective bond-orbital model. The last two papers deal with localized excitions. 122 refs

  8. Properties of minor actinide nitrides

    International Nuclear Information System (INIS)

    Takano, Masahide; Itoh, Akinori; Akabori, Mitsuo; Arai, Yasuo; Minato, Kazuo

    2004-01-01

    The present status of the research on properties of minor actinide nitrides for the development of an advanced nuclear fuel cycle based on nitride fuel and pyrochemical reprocessing is described. Some thermal stabilities of Am-based nitrides such as AmN and (Am, Zr)N were mainly investigated. Stabilization effect of ZrN was cleary confirmed for the vaporization and hydrolytic behaviors. New experimental equipments for measuring thermal properties of minor actinide nitrides were also introduced. (author)

  9. Five essays in property valuation

    OpenAIRE

    Yang, Zan

    2000-01-01

    This doctoral thesis consists of five self-contained essayspresented to the Faculty Board of the Royal Institute ofTechnology. Property valuation is a central issue that forms acommon thread in the analysis in these essays. In the thesisproperty is considered in a mixed asset context in an attemptto build a bridge between valuation, property investment andfinancial theory. The object of the thesis is to value propertyfor finance, sales and purchases and investment. Theinvestigation of the the...

  10. Structural relaxation: low temperature properties

    International Nuclear Information System (INIS)

    Cruz, F. de la

    1984-01-01

    We discuss the changes in transport and superconducting properties of amorphous Zr 70 Cu 30 , induced by thermal relaxation. The experimental results are used to investigate the relation between the microscopic parameters and the observed physical properties. It is shown that the density of eletronic states determines the shift Tc as well as the variation of the electrical resistivity. It is necessary to assume strong hybridization between s and d bands to understand the eletrodynamic response of the superconductor. (Author) [pt

  11. Electrical properties of molecular crystals

    International Nuclear Information System (INIS)

    Barraud, A.

    1968-01-01

    This literature survey summarizes the electrical properties of molecular crystals: molecular crystal structure, transport and excitation mechanisms of charge-carriers, and differences compared to inorganic semi-conductors. The main results concerning the electrical conductivity of the most-studied molecular crystals are presented, together with the optical and photo-electrical properties of these crystals. Finally the different types of electrical measurements used are reviewed, as well as the limits of each method. (author) [fr

  12. FUZZY RINGS AND ITS PROPERTIES

    Directory of Open Access Journals (Sweden)

    Karyati Karyati

    2017-01-01

      One of algebraic structure that involves a binary operation is a group that is defined  an un empty set (classical with an associative binary operation, it has identity elements and each element has an inverse. In the structure of the group known as the term subgroup, normal subgroup, subgroup and factor group homomorphism and its properties. Classical algebraic structure is developed to algebraic structure fuzzy by the researchers as an example semi group fuzzy and fuzzy group after fuzzy sets is introduced by L. A. Zadeh at 1965. It is inspired of writing about semi group fuzzy and group of fuzzy, a research on the algebraic structure of the ring is held with reviewing ring fuzzy, ideal ring fuzzy, homomorphism ring fuzzy and quotient ring fuzzy with its properties. The results of this study are obtained fuzzy properties of the ring, ring ideal properties fuzzy, properties of fuzzy ring homomorphism and properties of fuzzy quotient ring by utilizing a subset of a subset level  and strong level  as well as image and pre-image homomorphism fuzzy ring.   Keywords: fuzzy ring, subset level, homomorphism fuzzy ring, fuzzy quotient ring

  13. Analysis of Hydrologic Properties Data

    Energy Technology Data Exchange (ETDEWEB)

    H. H. Liu

    2003-04-03

    This Model Report describes the methods used to determine hydrologic properties based on the available field data from the unsaturated zone (UZ) at Yucca Mountain, Nevada, and documents validation of the active fracture model (AFM). This work was planned in ''Technical Work Plan (TWP) for: Performance Assessment Unsaturated Zone'' (BSC 2002 [160819], Sections 1.10.2, 1.10.3, and 1.10.8). Fracture and matrix properties are developed by analyzing available survey data from the Exploratory Studies Facility (ESF), Cross Drift for Enhanced Characterization of Repository Block (ECRB), and/or boreholes; air injection testing data from surface boreholes and from boreholes in the ESF; and data from laboratory testing of core samples. The AFM is validated on the basis of experimental observations and theoretical developments. This report is a revision of an Analysis Model Report, under the same title, as a scientific analysis with Document Identifier number ANL-NBS-HS-000002 (BSC 2001 [159725]) that did not document activities to validate the AFM. The principal purpose of this work is to provide representative uncalibrated estimates of fracture and matrix properties for use in the model report ''Calibrated Properties Model'' (BSC 2003 [160240]). The present work also provides fracture geometry properties for generating dual permeability grids as documented in the Scientific Analysis Report, ''Development of Numerical Grids for UZ Flow and Transport Modeling'' (BSC 2003 [160109]). The resulting calibrated property sets and numerical grids from these reports will be used in the Unsaturated Zone Flow and Transport Process Model (UZ Model), and Total System Performance Assessment (TSPA) models. The fracture and matrix properties developed in this Model Report include: (1) Fracture properties (frequency, permeability, van Genuchten a and m parameters, aperture, porosity, and interface area) for each UZ Model layer; (2

  14. Regressional Estimation of Cotton Sirospun Yarn Properties from Fibre Properties

    Directory of Open Access Journals (Sweden)

    Bedez Üte Tuba

    2014-09-01

    Full Text Available In this paper, it is aimed at determining the equations and models for estimating the sirospun yarn quality characteristics from the yarn production parameters and cotton fibre properties, which are focused on fibre bundle measurements represented by HVI (high volume instrument. For this purpose, a total of 270 sirospun yarn samples were produced on the same ring spinning machine under the same conditions at Ege University, by using 11 different cotton blends and three different strand spacing settings, in four different yarn counts and in three different twist coefficients. The sirospun yarn and cotton fibre property interactions were investigated by correlation analysis. For the prediction of yarn quality characteristics, multivariate linear regression methods were performed. As a result of the study, equations were generated for the prediction of yarn tenacity, breaking elongation, unevenness and hairiness by using fibre and yarn properties. After the goodness of fit statistics, very large determination coefficients (R2 and adjusted R2 were observed.

  15. Mangold Property Management, Inc. Information Sheet

    Science.gov (United States)

    Mangold Property Management, Inc. (the Company) is located in Monterey, California. The settlement involves the lease of properties constructed prior to 1978, located in Salinas and Monterey, California.

  16. Electrical Properties of Sunflower Achenes

    Directory of Open Access Journals (Sweden)

    Novák Ján

    2014-12-01

    Full Text Available This work contains the results of measuring the electrical properties of sunflower achenes. The interest in electrical properties of biological materials resulted in engineering research in this field. The results of measurements are used for determining the moisture content, the surface level of liquid and grainy materials, for controlling the presence of pests in grain storage, for the quantitative determination of mechanical damage, in the application of dielectric heating, and in many other areas. Electrical measurements of these materials are of fundamental importance in relation to the analysis of quantity of absorbed water and dielectric heating characteristics. It is a well-known fact that electrical properties of materials, namely dielectric constant and conductivity, are affected by the moisture content of material. This fact is important for the design of many commercial moisturetesting instruments for agricultural products. The knowledge of dielectric properties of materials is necessary for the application of dielectric heating. The aim of this work was to measure conductivity, dielectric constant and loss tangent on samples of sunflower achenes, the electrical properties of which had not been sufficiently measured. Measurements were performed under variable moisture content and the frequency of electric field ranging from 1 MHz to 16 MHz, using a Q meter with coaxial probe. It was concluded that conductivity, dielectric constant and loss tangent increased with increasing moisture content, and dielectric constant and loss tangent decreased as the frequency of electric field increased.

  17. Thermophysical properties of ionic liquids.

    Science.gov (United States)

    Rooney, David; Jacquemin, Johan; Gardas, Ramesh

    2010-01-01

    Low melting point salts which are often classified as ionic liquids have received significant attention from research groups and industry for a range of novel applications. Many of these require a thorough knowledge of the thermophysical properties of the pure fluids and their mixtures. Despite this need, the necessary experimental data for many properties is scarce and often inconsistent between the various sources. By using accurate data, predictive physical models can be developed which are highly useful and some would consider essential if ionic liquids are to realize their full potential. This is particularly true if one can use them to design new ionic liquids which maximize key desired attributes. Therefore there is a growing interest in the ability to predict the physical properties and behavior of ionic liquids from simple structural information either by using group contribution methods or directly from computer simulations where recent advances in computational techniques are providing insight into physical processes within these fluids. Given the importance of these properties this review will discuss the recent advances in our understanding, prediction and correlation of selected ionic liquid physical properties.

  18. 41 CFR 302-3.419 - For what property will my agency pay property management services?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false For what property will my agency pay property management services? 302-3.419 Section 302-3.419 Public Contracts and Property....419 For what property will my agency pay property management services? Your agency will only pay for...

  19. Microstructure, mechanical properties, bio-corrosion properties and antibacterial properties of Ti-Ag sintered alloys.

    Science.gov (United States)

    Chen, Mian; Zhang, Erlin; Zhang, Lan

    2016-05-01

    In this research, Ag element was selected as an antibacterial agent to develop an antibacterial Ti-Ag alloy by a powder metallurgy. The microstructure, phase constitution, mechanical properties, corrosion resistance and antibacterial properties of the Ti-Ag sintered alloys have been systematically studied by X-ray diffraction (XRD), scanning electron microscope (SEM), compressive test, electrochemical measurements and antibacterial test. The effects of the Ag powder size and the Ag content on the antibacterial property and mechanical property as well as the anticorrosion property have been investigated. The microstructure results have shown that Ti-Ag phase, residual pure Ag and Ti were the mainly phases in Ti-Ag(S75) sintered alloy while Ti2Ag was synthesized in Ti-Ag(S10) sintered alloy. The mechanical test indicated that Ti-Ag sintered alloy showed a much higher hardness and the compressive yield strength than cp-Ti but the mechanical properties were slightly reduced with the increase of Ag content. Electrochemical results showed that Ag powder size had a significant effect on the corrosion resistance of Ti-Ag sintered alloy. Ag content increased the corrosion resistance in a dose dependent way under a homogeneous microstructure. Antibacterial tests have demonstrated that antibacterial Ti-Ag alloy was successfully prepared. It was also shown that the Ag powder particle size and the Ag content influenced the antibacterial activity seriously. The reduction in the Ag powder size was benefit to the improvement in the antibacterial property and the Ag content has to be at least 3wt.% in order to obtain a strong and stable antibacterial activity against Staphylococcus aureus bacteria. The bacterial mechanism was thought to be related to the Ti2Ag and its distribution. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Absorption properties of identical atoms

    International Nuclear Information System (INIS)

    Sancho, Pedro

    2013-01-01

    Emission rates and other optical properties of multi-particle systems in collective and entangled states differ from those in product ones. We show the existence of similar effects in the absorption probabilities for (anti)symmetrized states of two identical atoms. The effects strongly depend on the overlapping between the atoms and differ for bosons and fermions. We propose a viable experimental verification of these ideas. -- Highlights: •The absorption rates of a pair of identical atoms in product and (anti)symmetrized states are different. •The modifications of the optical properties are essentially determined by the overlapping between the atoms. •The absorption properties differ, in some cases, for bosons and fermions

  1. Property (RD) for Hecke Pairs

    International Nuclear Information System (INIS)

    Shirbisheh, Vahid

    2012-01-01

    As the first step towards developing noncommutative geometry over Hecke C ∗ -algebras, we study property (RD) (Rapid Decay) for Hecke pairs. When the subgroup H in a Hecke pair (G, H) is finite, we show that the Hecke pair (G, H) has (RD) if and only if G has (RD). This provides us with a family of examples of Hecke pairs with property (RD). We also adapt Paul Jolissant’s works in Jolissaint (J K-Theory 2:723–735, 1989; Trans Amer Math Soc 317(1):167–196, 1990) to the setting of Hecke C ∗ -algebras and show that when a Hecke pair (G, H) has property (RD), the algebra of rapidly decreasing functions on the set of double cosets is closed under holomorphic functional calculus of the associated (reduced) Hecke C ∗ -algebra. Hence they have the same K 0 -groups.

  2. Sorption properties of carbon nanostructures

    International Nuclear Information System (INIS)

    Eletskii, Aleksandr V

    2004-01-01

    The current status of research in sorption properties of carbon nanotubes (CNTs) is reviewed. The structural peculiarities of CNTs, determining their sorption characteristics, are considered. The mechanisms of sorption of gaseous and condensed substances by such structures are analyzed. Special attention is paid to the problem of using CNTs for storing hydrogen and other gaseous substances. Methods for filling CNTs with liquid materials, based on capillary phenomena and wetting the graphite surface of the CNT with liquids of various nature, are considered. Properties of 'peapods' formed as a result of filling single-walled CNTs with fullerene molecules are reviewed. Also considered are perspectives on the applied usage of the sorption properties of CNTs in electrochemical and fuel cells, and material storage devices, as well as for producing superminiature metallic conductors. (reviews of topical problems)

  3. Intellectual property rights in nanotechnology

    International Nuclear Information System (INIS)

    Bastani, Behfar; Fernandez, Dennis

    2002-01-01

    Intellectual property (IP) rights are essential in today's technology-driven age. Building a strategic IP portfolio is economically important from both an offensive and defensive standpoint. After an introduction to intellectual property rights and acquisitions, we provide an overview of current efforts in nanotechnology. Research into nano-scale materials and devices and requirements for their efficient mass production are outlined, with focus on the applicable IP rights and strategies. We present current and future applications of nanotechnology to such fields as electronics, sensors, aerospace, medicine, environment and sanitation, together with the IP rights that can be brought to bear in each. Finally, some challenging issues surrounding the acquisition of intellectual property rights in nanotechnology are presented

  4. Surface properties of beached plastics.

    Science.gov (United States)

    Fotopoulou, Kalliopi N; Karapanagioti, Hrissi K

    2015-07-01

    Studying plastic characteristics in the marine environment is important to better understand interaction between plastics and the environment. In the present study, high-density polyethylene (HDPE), polyethylene terephalate (PET), and polyvinyl chloride (PVC) samples were collected from the coastal environment in order to study their surface properties. Surface properties such as surface functional groups, surface topography, point of zero charge, and color change are important factors that change during degradation. Eroded HDPE demonstrated an altered surface topography and color and new functional groups. Eroded PET surface was uneven, yellow, and occasionally, colonized by microbes. A decrease in Fourier transform infrared (FTIR) peaks was observed for eroded PET suggesting that degradation had occurred. For eroded PVC, its surface became more lamellar and a new FTIR peak was observed. These surface properties were obtained due to degradation and could be used to explain the interaction between plastics, microbes, and pollutants.

  5. Tuning Properties in Silver Clusters

    KAUST Repository

    Joshi, Chakra Prasad

    2015-07-09

    The properties of Ag nanoclusters are not as well understood as those of their more precious Au cousins. However, a recent surge in the exploration of strategies to tune the physicochemical characteristics of Ag clusters addresses this imbalance, leading to new insights into their optical, luminescence, crystal habit, metal-core, ligand-shell and environmental properties. In this Perspective, we provide an overview of the latest strategies along with a brief introduction of the theoretical framework necessary to understand the properties of silver nanoclusters and the basis for their tuning. The advances in cluster research and the future prospects presented in this Perspective will eventually guide the next large systematic study of nanoclusters, resulting in a single collection of data similar to the periodic table of elements.

  6. Electrophysical properties of calcium vanadates

    International Nuclear Information System (INIS)

    Krasnenko, T.I.; Fotiev, A.A.

    1983-01-01

    Electrophysical properties of calcium vanadates are studied for the case of alteration of external parameters of the medium (PO 2 , T). It is lshown that structural transformations bring about changes in the nature of electrophysical properties of Ca 2 V 2 O 7 , Ca 3 (VO 4 ) 2 , this being the reason for charge redistribution in anion groupings. It is obvious, that the general conductivity of calcium methavanadate is mainly caused by ion transport. Ca(VO 3 ) 2 possesses amphoteric character of semiconducting properties: the type of conductivity changes from ''p'' to ''n'' with temperature increase. Polytherms of conductivity and sums of ion numbers of Ca 2 V 2 O 7 transition are given. It is established that calcium pyrovanadate has a mixed electron-ion conductivity

  7. Magnetic properties of iron nanoparticle

    International Nuclear Information System (INIS)

    Carvell, J.; Ayieta, E.; Gavrin, A.; Cheng, Ruihua; Shah, V. R.; Sokol, P.

    2010-01-01

    Magnetic properties of Fe nanoparticles with different sizes synthesized by a physical deposition technique have been investigated experimentally. We have used a high pressure sputtering technique to deposit iron nanoparticles on a silicon substrate. The nanoparticles are then analyzed using atomic force microscopy (AFM), transmission electron microscopy (TEM), and superconducting quantum interference device techniques. TEM and AFM data show that the particle size could be tuned by adjusting the deposition conditions. The magnetic properties have been investigated from temperature dependent magnetization M(T) and field dependent magnetization M(H) measurements. The results show that two phases including both ferromagnetic and superparamagnetic particles are present in our system. From these data we extracted the superparamagnetic critical size to be 9 nm for our samples. Ferromagnetic particles are single magnetic domain particles and the magnetic properties can be explained by the Stoner and Wohlfarth model. For the superparamagnetic phase, the effective anisotropy constant, K eff , decreases as the particle size increases.

  8. Fiduciary transfer of property rights

    Directory of Open Access Journals (Sweden)

    Đurđić Tamara

    2011-01-01

    Full Text Available Fiduciary transfer of property rights for the purpose of loan security represents the non-possessory form of collateral, which experiences renaissance in the comparative law. It is a complex legal institute, which is subject to numerous concerns and can be viewed from different perspectives, due to the large number of its specific features - non typical for the Continental European legal systems. The paper discusses disputed issues related to defining the causa, as well as the legal grounds, for fiduciary transfer of property rights, its legal nature and the justification thereof. Aiming at more adequate understanding of this complex Property Law institute and finding satisfactory answers to some of the disputed issues the legal theory has opened, the author analyses provisions of current legislation in Montenegro, which was the first country in the Region to regulate this non-possessory form of collateral.

  9. Analysis of Hydrologic Properties Data

    International Nuclear Information System (INIS)

    Liu, H.H.; Ahlers, C.F.

    2001-01-01

    The purpose of this Analysis/Model Report (AMR) is to describe the methods used to determine hydrologic properties based on the available field data from the unsaturated zone at Yucca Mountain, Nevada. This is in accordance with the AMR Development Plan (DP) for U0090 Analysis of Hydrologic Properties Data (CRWMS M and O 1999c). Fracture and matrix properties are developed by compiling and analyzing available survey data from the Exploratory Studies Facility (ESF), Cross Drift of Enhanced Characterization of Repository Block (ECRB), and/or boreholes; air injection testing data from surface boreholes and from boreholes in ESF; in-situ measurements of water potential; and data from laboratory testing of core samples

  10. Tuning Properties in Silver Clusters

    KAUST Repository

    Joshi, Chakra Prasad; Bootharaju, Megalamane Siddaramappa; Bakr, Osman

    2015-01-01

    The properties of Ag nanoclusters are not as well understood as those of their more precious Au cousins. However, a recent surge in the exploration of strategies to tune the physicochemical characteristics of Ag clusters addresses this imbalance, leading to new insights into their optical, luminescence, crystal habit, metal-core, ligand-shell and environmental properties. In this Perspective, we provide an overview of the latest strategies along with a brief introduction of the theoretical framework necessary to understand the properties of silver nanoclusters and the basis for their tuning. The advances in cluster research and the future prospects presented in this Perspective will eventually guide the next large systematic study of nanoclusters, resulting in a single collection of data similar to the periodic table of elements.

  11. Spectroscopic properties of transition elements and their related magnetic properties

    International Nuclear Information System (INIS)

    Porcher, P.; Malta, O.L.

    1988-01-01

    The optical and magnetic properties of transition elements (nd N and nf N ions) are analysed. The phenomenological parameters introduced in the crystal-ligand field theory, the free ion interactions and crystalline matrix as well as electrostatic repulsion are studied. (M.J.C.) [pt

  12. Magnetic properties and microwave absorption properties of short ...

    Indian Academy of Sciences (India)

    als in the high-frequency range owing to their fascinating properties.2,3 However, .... Ni deposition.24 Owing to the low solubility of carbon in iron and nickel, Ni–Fe ... real (μ ) and imaginary (μ ) of complex permeability of the. Fe0.21Ni0.69/CF ...

  13. TRANSPORT PROPERTIES FOR REFRIGERANT MIXTURES

    Directory of Open Access Journals (Sweden)

    V. Geller

    2014-06-01

    Full Text Available A set of models to predict viscosity and thermal conductivity of refrigerant mixtures is developed. A general model for viscosity and thermal conductivity use the three contributions sum form (the dilute-gas terms, the residual terms, and the liquid terms. The corresponding states model is recommended to predict the dense gas transport properties over a range of reduced density from 0 to 2. It is shown that the RHS model provides the most reliable results for the saturated-liquid and the compressed-liquid transport properties over a range of given temperatures from 0,5 to 0,95.

  14. Property and Human Genetic Information

    DEFF Research Database (Denmark)

    Nielsen, Morten Ebbe Juul; Kongsholm, Nana Cecilie Halmsted; Schovsbo, Jens Hemmingsen

    2018-01-01

    Do donors (of samples from which genetic information is derived) have some sort of pre-legal (moral) or legal property right to that information? In this paper, we address this question from both a moral philosophical and a legal point of view. We argue that philosophical theories about property do...... innovation in society. A balancing of interest must take place and we have to make sure that patent protection serves general societal interests and not just those of special interest groups be that inventors or donors....

  15. Transport Properties in Nuclear Pasta

    Science.gov (United States)

    Caplan, Matthew; Horowitz, Charles; Berry, Donald; da Silva Schneider, Andre

    2016-09-01

    At the base of the inner crust of neutron stars, where matter is near the nuclear saturation density, nuclear matter arranges itself into exotic shapes such as cylinders and slabs, called `nuclear pasta.' Lepton scattering from these structures may govern the transport properties of the inner crust; electron scattering from protons in the pasta determines the thermal and electrical conductivity, as well as the shear viscosity of the inner crust. These properties may vary in pasta structures which form at various densities, temperatures, and proton fractions. In this talk, we report on our calculations of lepton transport in nuclear pasta and the implication for neutron star observables.

  16. Abelian properties of Anick spaces

    CERN Document Server

    Gray, Brayton

    2017-01-01

    Anick spaces are closely connected with both EHP sequences and the study of torsion exponents. In addition they refine the secondary suspension and enter unstable periodicity. This work describes their H-space properties as well as universal properties. Techniques include a new kind on Whitehead product defined for maps out of co-H spaces, calculations in an additive category that lies between the unstable category and the stable category, and a controlled version of the extension theorem of Gray and Theriault (Geom. Topol. 14 (2010), no. 1, 243-275).

  17. Ibuprofen: Synthesis, production and properties

    Directory of Open Access Journals (Sweden)

    Mijin Dušan Ž.

    2003-01-01

    Full Text Available Since its introduction in 1969, ibuprofen has become one of the most common painkillers in the world. Ibuprofen in an NSAID (non-steroidal anti-inflammatory drug and like other drugs of its class it possesses analgetic, antipyretic and anti-inflammatory properties. While ibuprofen is a relatively simple molecule, there is still sufficient structural complexity to ensure that a large number of different synthetic approaches are possible. Since the introduction of pharmaceutical products containing ibuprofen, industrial and academic scientists have developed many potential production processes. This paper describes the history, synthesis and production, as well as the properties and stability of ibuprofen.

  18. Properties of radiation cured coatings

    International Nuclear Information System (INIS)

    Larson, E.G.; Spencer, D.S.; Boettcher, T.E.; Melbauer, M.A.; Skarjune, R.P.

    1987-01-01

    Coatings were prepared from acrylate or methacrylate functionalized resins to study the effect of end group functionality on the physical properties of u.v. and electron beam cured coatings. Cure response was measured by solid state NMR and gel extraction, as expected, methacrylate resins cured much slower. Thermal Gravimetric Analysis (TGA) revealed acrylate coatings have greater thermal stability. Properties such as tensile strength and hardness showed little effect of end group functionality or curing method. The O 2 and H 2 O permeabilities of the coating were correlated with the processing conditions. (author)

  19. Statistical Properties of Online Auctions

    Science.gov (United States)

    Namazi, Alireza; Schadschneider, Andreas

    We characterize the statistical properties of a large number of online auctions run on eBay. Both stationary and dynamic properties, like distributions of prices, number of bids etc., as well as relations between these quantities are studied. The analysis of the data reveals surprisingly simple distributions and relations, typically of power-law form. Based on these findings we introduce a simple method to identify suspicious auctions that could be influenced by a form of fraud known as shill bidding. Furthermore the influence of bidding strategies is discussed. The results indicate that the observed behavior is related to a mixture of agents using a variety of strategies.

  20. Mechanical properties of ordered alloys

    International Nuclear Information System (INIS)

    Kroupa, F.

    1977-06-01

    A survey is given of the metallophysical fundamentals of the mechanical properties of ordered two-phase alloys. Alloys of this type have a superlattice structure in a substitution mixed crystal. Ordering is achieved by slow cooling or by annealing below the critical temperature, during which ordering domains (antiphase domains) are formed. At a high degree of ordering, the dislocations are concentrated to form pairs, so-called super-dislocations. The mechanical properties may be selectively changed by varying different parameters (size of the ordering domains, degree of ordering, energy of the antiphase boundaries) by a special composition and heat treatment.(GSC) [de

  1. Microstructure, mechanical properties, bio-corrosion properties and antibacterial properties of Ti–Ag sintered alloys

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Mian [Key Lab. for Anisotropy and Texture of Materials, Education Ministry of China, Northeastern University, Shenyang 110819 (China); Zhang, Erlin, E-mail: zhangel@atm.neu.edu.cn [Key Lab. for Anisotropy and Texture of Materials, Education Ministry of China, Northeastern University, Shenyang 110819 (China); Zhang, Lan [State Key Laboratory for Mechanical Behavior of Materials, Xi' an Jiaotong University, Xi' an 710049 (China)

    2016-05-01

    In this research, Ag element was selected as an antibacterial agent to develop an antibacterial Ti–Ag alloy by a powder metallurgy. The microstructure, phase constitution, mechanical properties, corrosion resistance and antibacterial properties of the Ti–Ag sintered alloys have been systematically studied by X-ray diffraction (XRD), scanning electron microscope (SEM), compressive test, electrochemical measurements and antibacterial test. The effects of the Ag powder size and the Ag content on the antibacterial property and mechanical property as well as the anticorrosion property have been investigated. The microstructure results have shown that Ti–Ag phase, residual pure Ag and Ti were the mainly phases in Ti–Ag(S75) sintered alloy while Ti{sub 2}Ag was synthesized in Ti–Ag(S10) sintered alloy. The mechanical test indicated that Ti–Ag sintered alloy showed a much higher hardness and the compressive yield strength than cp-Ti but the mechanical properties were slightly reduced with the increase of Ag content. Electrochemical results showed that Ag powder size had a significant effect on the corrosion resistance of Ti–Ag sintered alloy. Ag content increased the corrosion resistance in a dose dependent way under a homogeneous microstructure. Antibacterial tests have demonstrated that antibacterial Ti–Ag alloy was successfully prepared. It was also shown that the Ag powder particle size and the Ag content influenced the antibacterial activity seriously. The reduction in the Ag powder size was benefit to the improvement in the antibacterial property and the Ag content has to be at least 3 wt.% in order to obtain a strong and stable antibacterial activity against Staphylococcus aureus bacteria. The bacterial mechanism was thought to be related to the Ti{sub 2}Ag and its distribution. - Highlights: • Ti–Ag alloy with up to 99% antibacterial rate was developed by powder metallurgy. • The effects of the Ag powder size and the Ag content on the

  2. Directed networks, allocation properties and hierarchy formation

    NARCIS (Netherlands)

    Slikker, M.; Gilles, R.P.; Norde, H.W.; Tijs, S.H.

    2005-01-01

    We investigate properties for allocation rules on directed communication networks and the formation of such networks under these payoff properties. We study allocation rules satisfying two appealing properties, Component Efficiency (CE) and the Hierarchical Payoff Property (HPP). We show that such

  3. 36 CFR 1207.31 - Real property.

    Science.gov (United States)

    2010-07-01

    ... Section 1207.31 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION GENERAL... original purchase to the fair market value of the property. However, in those situations where a grantee or... purchase of the real property to the current fair market value of the property. ...

  4. Mechanical Properties of Picea sitchensis

    DEFF Research Database (Denmark)

    Bräuner, Lise; Hoffmeyer, Preben; Poulsson, Lise

    2000-01-01

    the requirements at the same level as Danish grown Norway spruce. The study shows that Sitka spruce and Norway spruce of the same origin exhibit highly comparable mechanical properties. Key words: annual ring width, bending strength, characteristic strength, dry density, EN 338, INSTA 142, modulus of elasticity...

  5. Mechanical properties of organic nanofibers

    DEFF Research Database (Denmark)

    Kjelstrup-Hansen, Jakob; Hansen, Ole; Rubahn, H.R.

    2006-01-01

    Intrinsic elastic and inelastic mechanical Properties of individual, self-assembled, quasi-single-crystalline para-hexaphenylene nanofibers supported on substrates with different hydrophobicities are investigated as well as the interplay between the fibers and the underlying substrates. We find...

  6. A common sense of property?

    DEFF Research Database (Denmark)

    Cockburn, Patrick Joseph

    2016-01-01

    the human sciences it is important to trace the implicit knowledge claims that accompany the explicit normative arguments, paying specific attention to the ‘exemplars’ that underpin lines of argument, and the ‘sources of property knowledge’ that are drawn upon. This paper draws on and reworks W. B. Gallie...

  7. Wave properties of the neutron

    International Nuclear Information System (INIS)

    Shull, C.G.

    1983-01-01

    The wave properties of neutrons have been studied and exploited in many areas of physics almost from the time of Chadwick's discovery. Illustrations of these will be provided showing the extreme range of energy and de Broglie wavelength over which they have been observed. Attention will be directed to some of the characteristics associated with wave packet propagation. (author)

  8. Properties of von Neumann entropy

    Indian Academy of Sciences (India)

    disentangled) as seen by moving observers, is used to investigate the properties of von Neumann entropy, as a measure of spin–momentum entanglement. To do so, we partition the total Hilbert space into momentum and spin subspaces so that the ...

  9. Tensor Transpose and Its Properties

    OpenAIRE

    Pan, Ran

    2014-01-01

    Tensor transpose is a higher order generalization of matrix transpose. In this paper, we use permutations and symmetry group to define? the tensor transpose. Then we discuss the classification and composition of tensor transposes. Properties of tensor transpose are studied in relation to tensor multiplication, tensor eigenvalues, tensor decompositions and tensor rank.

  10. Properties of organic salt superconductors

    International Nuclear Information System (INIS)

    Whangbo, M.H.; Jung, D.; Evain, M.; Williams, J.M.; Beno, M.A.; Schultz, A.J.

    1989-01-01

    Structural and electronic properties of the β- and κ-phase superconducting salts of organic donor molecules are compared. Importance of donor... donor and donor...anion interactions involving the C-H bonds in setting the lattice softness, the electron-phonon coupling constant, and the superconducting transitions temperature are discussed

  11. Anomalous properties of technetium clusters

    International Nuclear Information System (INIS)

    Kryuchkov, S.V.

    1985-01-01

    On the basis of critical evaluation of literature data in the field of chemistry of technetium cluster compounds with ligands of a weak field a conclusion is made on specific, ''anomalous'' properties of technetium cluster complexes which consist in an increased ability of the given element to the formation of a series of binuclear and multinuclear clusters, similar in composition and structure and easily transforming in each other. The majority of technetium clusters unlike similar compounds of other elements are paramagnetic with one unpaired electron on ''metallic'' MO of loosening type. All theoretical conceptions known today on the electronic structure of technetium clusters are considered. It is pointed out, that the best results in the explanation of ''anomalous'' properties of technetium clusters can be obtained in the framework of nonempirical methods of self-consistent field taking into account configuration interactions. It is also shown, that certain properties of technetium clusters can be explained on the basis of qualitative model of Coulomb repulsion of metal atoms in clusters. The conclusion is made, that technetium position in the Periodic table, as well as recently detected technetium property to the decrease of effective charge on its atoms during M-M bond formation promote a high ability of the element to cluster formation both with weak field ligands and with strong field one

  12. Material Properties at Low Temperature

    International Nuclear Information System (INIS)

    Duthil, P

    2014-01-01

    From ambient down to cryogenic temperatures, the behaviour of materials changes greatly. Mechanisms leading to variations in electrical, thermal, mechanical, and magnetic properties in pure metals, alloys, and insulators are briefly introduced from a general engineering standpoint. Data sets are provided for materials commonly used in cryogenic systems for design purposes

  13. Game 'life' with anticipation property

    NARCIS (Netherlands)

    Makarenko, A.; Goldengorin, B.; Krushynskyi, D.; Umeo, H.; Morishita, S.; Nishinari, K.; Komatsuzaki, T.; Bandini, S.

    2008-01-01

    Mechanisms of endowing cellular automata (CA) models with anticipation property are considered. As a background for investigation a widely known Conway’s game of ‘Life’ was chosen. Even within this simple model, introduction of anticipation has a crucial impact on the behavior of the system,

  14. Experiments on common property management

    NARCIS (Netherlands)

    van Soest, D.P.; Shogren, J.F.

    2013-01-01

    Common property resources are (renewable) natural resources where current excessive extraction reduces future resource availability, and the use of which is de facto restricted to a specific set of agents, such as inhabitants of a village or members of a community; think of community-owned forests,

  15. Model Checking Discounted Temporal Properties

    NARCIS (Netherlands)

    de Alfaro, Luca; Faella, Marco; Henzinger, Thomas A.; Majumdar, Rupak; Stoelinga, Mariëlle Ida Antoinette

    2005-01-01

    Temporal logic is two-valued: a property is either true or false. When applied to the analysis of stochastic systems, or systems with imprecise formal models, temporal logic is therefore fragile: even small changes in the model can lead to opposite truth values for a specification. We present a

  16. Model Checking Discounted Temporal Properties

    NARCIS (Netherlands)

    de Alfaro, Luca; Faella, Marco; Henzinger, Thomas A.; Majumdar, Rupak; Stoelinga, Mariëlle Ida Antoinette; Jensen, K; Podelski, A.

    2004-01-01

    Temporal logic is two-valued: a property is either true or false. When applied to the analysis of stochastic systems, or systems with imprecise formal models, temporal logic is therefore fragile: even small changes in the model can lead to opposite truth values for a specification. We present a

  17. The physical properties of glycerin

    International Nuclear Information System (INIS)

    Kimsanov, B.Kh.; Karimov, M.B.; Khuseynov, K.

    1998-01-01

    In this chapter of book authors describe physical properties of glycerin. The pure glycerin presents syrup-vivid insipid transparent solution odorless and sweet on taste. The glycerin is very hygroscopic and can absorb from air till 40% moisture against its mass

  18. Higgs boson properties in ATLAS

    CERN Document Server

    Mansoulie, Bruno; The ATLAS collaboration

    2017-01-01

    The measurement by the ATLAS collaboration of Higgs boson properties is presented, in terms of production cross-sections, simplified template cross-sections, couplings. The measurements are based on the analysis of the H decay channels to diphoton and 4 leptons, using 36.1 fb-1 of 13 TeV data recorded in 2015 and 2016.

  19. Mechanical properties of carbon nanotubes

    Science.gov (United States)

    Salvetat, J.-P.; Bonard, J.-M.; Thomson, N. H.; Kulik, A. J.; Forró, L.; Benoit, W.; Zuppiroli, L.

    A variety of outstanding experimental results on the elucidation of the elastic properties of carbon nanotubes are fast appearing. These are based mainly on the techniques of high-resolution transmission electron microscopy (HRTEM) and atomic force microscopy (AFM) to determine the Young's moduli of single-wall nanotube bundles and multi-walled nanotubes, prepared by a number of methods. These results are confirming the theoretical predictions that carbon nanotubes have high strength plus extraordinary flexibility and resilience. As well as summarising the most notable achievements of theory and experiment in the last few years, this paper explains the properties of nanotubes in the wider context of materials science and highlights the contribution of our research group in this rapidly expanding field. A deeper understanding of the relationship between the structural order of the nanotubes and their mechanical properties will be necessary for the development of carbon-nanotube-based composites. Our research to date illustrates a qualitative relationship between the Young's modulus of a nanotube and the amount of disorder in the atomic structure of the walls. Other exciting results indicate that composites will benefit from the exceptional mechanical properties of carbon nanotubes, but that the major outstanding problem of load transfer efficiency must be overcome before suitable engineering materials can be produced.

  20. Material Properties at Low Temperature

    CERN Document Server

    Duthil, P

    2014-07-17

    From ambient down to cryogenic temperatures, the behaviour of materials changes greatly. Mechanisms leading to variations in electrical, thermal, mechanical, and magnetic properties in pure metals, alloys, and insulators are briefly introduced from a general engineering standpoint. Data sets are provided for materials commonly used in cryogenic systems for design purposes.

  1. Semiconductor materials and their properties

    NARCIS (Netherlands)

    Reinders, Angelina H.M.E.; Verlinden, Pierre; van Sark, Wilfried; Freundlich, Alexandre; Reinders, Angele; Verlinden, Pierre; van Sark, Wilfried; Freundlich, Alexandre

    2017-01-01

    Semiconductor materials are the basic materials which are used in photovoltaic (PV) devices. This chapter introduces solid-state physics and semiconductor properties that are relevant to photovoltaics without spending too much time on unnecessary information. Usually atoms in the group of

  2. Environmental indicators for evaluating properties

    Directory of Open Access Journals (Sweden)

    Mario Grosso

    2015-06-01

    Full Text Available Property evaluation for tax purposes has traditionally relied on urban and building criteria, mostly resulting from concepts driven by the commercial attractiveness of the property under evaluation, its building and the site itself. Due to the world climate and ecological crisis, awareness has risen about the need for other indicators, which can evaluate the quality of a property, even referring to its potential environmental impact. Technical standards for the evaluation of buildings’ environmental sustainability, which have been developed since the first years of this century, both nationally and internationally, take into account the impact of the building and its relevance for the life-cycle of materials and elements, with reference to the three sectors of sustainability: environmental, economic and social. The social sector includes indicators referring to the user’s health and comfort, which also interact with the morphological and spatial characteristics of the building. However, there is a lack of methodological tools for the evaluation of said indicators and existing ones are mainly of a qualitative type. This paper suggests a methodological approach for the quantitative evaluation of sustainability indicators, relying on the accessibility of a site’s climate resources by the property, as a criterion to evaluate the potential for the reduction of negative environmental impact, as well as a criterion to improve users’ life quality.

  3. Some properties of plurisubharmonic functions

    OpenAIRE

    Ancona, Alano; Kaufmann, Lucas

    2014-01-01

    Two properties of plurisubharmonic functions are proven. The first result is a Skoda type integrability theorem with respect to a Monge-Amp\\`ere mass with H\\"older continuous potential. The second one says that locally, a p.s.h. function is $k$-Lipschitz outside a set of Lebesgue measure smaller that $c/k^2$.

  4. Mixing properties of quantum systems

    International Nuclear Information System (INIS)

    Narnhofer, H.; Thirring, W.

    1988-01-01

    We generalize the classical notion of topological mixing for automorphisms of C * -algebras in two ways. We show that for Galilean invariant Fermi systems the weaker form of mixing is satisfied. With some additional requirement on the range of the interaction we can also demonstrate the stronger mixing property. (Author)

  5. Electromagnetic properties of excited bands

    International Nuclear Information System (INIS)

    Salading, J.X.

    1980-01-01

    In this paper the predictions of various microcopic and phenomenological models for the electromagnetic properties of nuclei are compared with experiment. The discussion centers on five case studies and illustrates that there often exist certain key matrix elements which permit to differentiate between various models. (orig.)

  6. The Capability to Hold Property

    NARCIS (Netherlands)

    Claassen, Rutger

    2015-01-01

    This paper discusses the question of whether a capability theory of justice (such as that of Martha Nussbaum) should accept a basic “capability to hold property.” Answering this question is vital for bridging the gap between abstract capability theories of justice and their institutional

  7. Density measures and additive property

    OpenAIRE

    Kunisada, Ryoichi

    2015-01-01

    We deal with finitely additive measures defined on all subsets of natural numbers which extend the asymptotic density (density measures). We consider a class of density measures which are constructed from free ultrafilters on natural numbers and study a certain additivity property of such density measures.

  8. Superheavy elements and decay properties

    Indian Academy of Sciences (India)

    2015-08-04

    Aug 4, 2015 ... The decay properties of the isotopes of = 115, 117, 118 and 119 have been extensively investigated, focussing on the newly synthesized isotopes within the Coulomb and proximity potential model for deformed nuclei (CPPMDN). The half-lives have also been evaluated using the Viola–Seaborg ...

  9. Using Intellectual Property Rights Strategically

    DEFF Research Database (Denmark)

    Reitzig, Markus

    2003-01-01

    With the share of intellectual property among corporate value constantly rising,management's understanding of the strategic use of patents, trademarks, andcopyrights becomes ever more crucial. The vast majority of articles on patent ortrademark strategies, however, is written by and for lawyers d...... observations in the deployment of patents andtrademarks and inspires them to think more creatively about IPRs than they didbefore....

  10. Polygon Properties: What Is Possible?

    Science.gov (United States)

    Rodrigue, Paulette R.; Robichaux, Rebecca R.

    2010-01-01

    Sorting shapes and solving riddles develop and advance children's geometric thinking and understanding while promoting mathematical communication, cooperative learning, and numerous representations. This article presents a brief summary of how children develop an understanding of the properties of geometric shapes as well as a description of the…

  11. Nuclear properties from perturbative QCD

    International Nuclear Information System (INIS)

    Close, F.E.; Roberts, R.G.; Ross, G.G.

    1986-01-01

    Two apparently different descriptions of quark distributions in a nucleus may in fact be connected. A ''duality'' between the QCD approach and the conventional model of nucleon binding leads to nuclear properties being simply related to the anomalous dimensions of QCD. (orig.)

  12. Material Properties at Low Temperature

    Energy Technology Data Exchange (ETDEWEB)

    Duthil, P [Orsay, IPN (France)

    2014-07-01

    From ambient down to cryogenic temperatures, the behaviour of materials changes greatly. Mechanisms leading to variations in electrical, thermal, mechanical, and magnetic properties in pure metals, alloys, and insulators are briefly introduced from a general engineering standpoint. Data sets are provided for materials commonly used in cryogenic systems for design purposes.

  13. Properties of coaxial magnetocumulative generators

    International Nuclear Information System (INIS)

    Kidder, R.E.

    1983-01-01

    The properties of a coaxial magnetocumulative generator (MCG) in which the current increases exponetially with time are derived and discussed. Such an exponential MCG possess highly desirable performance characteristics that are readily derived and expressed in terms of simple formulas. It is concluded that an exponential MCG may approach a capability of delivering 100 megajoules to a 1 nanohenry load in 1 microsecond

  14. Top Quark Properties at Tevatron

    Energy Technology Data Exchange (ETDEWEB)

    Lysák, Roman [Prague, Inst. Phys.

    2017-11-27

    The latest CDF and D0 experiment measurements of the top quark properties except the top quark mass are presented. The final combination of the CDF and D0 forward-backward asymmetry measurements is shown together with the D0 measurements of the inclusive top quark pair cross-section as well as the top quark polarization.

  15. Mechanical Properties of Composite Materials

    Directory of Open Access Journals (Sweden)

    Mitsuhiro Okayasu

    2014-10-01

    Full Text Available An examination has been made of the mechanical and failure properties of several composite materials, such as a short and a long carbon fiber reinforced plastic (short- and long-CFRP and metal based composite material. The short CFRP materials were used for a recycled CFRP which fabricated by the following process: the CFRP, consisting of epoxy resin with carbon fiber, is injected to a rectangular plate cavity after mixing with acrylonitrile butadiene styrene resin with different weight fractions of CFRP. The fatigue and ultimate tensile strength (UTS increased with increasing CFRP content. These correlations, however, break down, especially for tensile strength, as the CFPR content becomes more than 70%. Influence of sample temperature on the bending strength of the long-CFRP was investigated, and it appears that the strength slightly degreases with increasing the temperature, due to the weakness in the matrix. Broken fiber and pull-out or debonding between the fiber and matrix were related to the main failure of the short- and long-CFRP samples. Mechanical properties of metal based composite materials have been also investigated, where fiber-like high hardness CuAl2 structure is formed in aluminum matrix. Excellent mechanical properties were obtained in this alloy, e.g., the higher strength and the higher ductility, compared tothe same alloy without the fiber-like structure. There are strong anisotropic effects on the mechanical properties due to the fiber-like metal composite in a soft Al based matrix.

  16. Thermodynamical Properties of 56Fe

    International Nuclear Information System (INIS)

    Tavukcu, E.; Becker, J.A.; Bernstein, L.A.; Garrett, P.E.; Guttormsen, M.; Mitchell, G.E.; Rekstad, J.; Schiller, A.; Siem, S.; Voinov, A.; Younes, W.

    2002-01-01

    Average nuclear level densities close to the nuclear binding energy in 56 Fe and 57 Fe are extracted from primary γ-ray spectra. Thermal properties of 56 Fe are studied within the statistical canonical ensemble. The experimental heat capacity is compared with the theoretical heat capacity calculated within the shell model Monte Carlo approach

  17. The representation of inherent properties.

    Science.gov (United States)

    Prasada, Sandeep

    2014-10-01

    Research on the representation of generic knowledge suggests that inherent properties can have either a principled or a causal connection to a kind. The type of connection determines whether the outcome of the storytelling process will include intuitions of inevitability and a normative dimension and whether it will ground causal explanations.

  18. Properties of neutrinos: Recent results

    International Nuclear Information System (INIS)

    Robertson, R.G.H.

    1987-01-01

    Recent progress in experimental determinations of the properties of neutrinos is summarized. In particular, the extensive work on direct kinematic measurements of neutrino mass, on neutrino counting and on neutrino oscillations is highlighted. It is concluded that there may already be sufficient information to fix the masses of the neutrinos, but the evidence is still far from convincing. 63 refs., 13 figs

  19. NIST/ASME Steam Properties Database

    Science.gov (United States)

    SRD 10 NIST/ASME Steam Properties Database (PC database for purchase)   Based upon the International Association for the Properties of Water and Steam (IAPWS) 1995 formulation for the thermodynamic properties of water and the most recent IAPWS formulations for transport and other properties, this updated version provides water properties over a wide range of conditions according to the accepted international standards.

  20. Multiplicative properties of quantum channels

    Science.gov (United States)

    Rahaman, Mizanur

    2017-08-01

    In this paper, we study the multiplicative behaviour of quantum channels, mathematically described by trace preserving, completely positive maps on matrix algebras. It turns out that the multiplicative domain of a unital quantum channel has a close connection to its spectral properties. A structure theorem (theorem 2.5), which reveals the automorphic property of an arbitrary unital quantum channel on a subalgebra, is presented. Various classes of quantum channels (irreducible, primitive, etc) are then analysed in terms of this stabilising subalgebra. The notion of the multiplicative index of a unital quantum channel is introduced, which measures the number of times a unital channel needs to be composed with itself for the multiplicative algebra to stabilise. We show that the maps that have trivial multiplicative domains are dense in completely bounded norm topology in the set of all unital completely positive maps. Some applications in quantum information theory are discussed.

  1. Exoplanets Detection, Formation, Properties, Habitability

    CERN Document Server

    Mason, John W

    2008-01-01

    This edited, multi-author volume will be an invaluable introduction and reference to all key aspects in the field of exoplanet research. The reviews cover: Detection methods and properties of known exoplanets, Detection of extrasolar planets by gravitational microlensing. The formation and evolution of terrestrial planets in protoplanetary and debris disks. The brown dwarf-exoplanet connection. Formation, migration mechanisms and properties of hot Jupiters. Dynamics of multiple exoplanet systems. Doppler exoplanet surveys. Searching for exoplanets in the stellar graveyard. Formation and habitability of extra solar planets in multiple star systems. Exoplanet habitats and the possibilities for life. Moons of exoplanets: habitats for life. Contributing authors: •Rory Barnes •David P. Bennett •Jian Ge •Nader Haghighipour •Patrick Irwin •Hugh Jones •Victoria Meadows •Stanimir Metchev •I. Neill Reid •George Rieke •Caleb Scharf •Steinn Sigurdsson

  2. Electric Properties Measurement of Lentil

    Directory of Open Access Journals (Sweden)

    Novák Ján

    2018-03-01

    Full Text Available This paper contains the results of the electric properties measurement of lentil set. Electric measurements with use of these materials are of fundamental importance in relation to the analysis of quantity of absorbed water and dielectric heating characteristics. The aim of this paper was to perform the measurements of conductivity, dielectric constant and loss tangent on samples of lentil, the electrical properties of which had not been sufficiently measured. Measurements were performed under various moisture contents, and the frequency of electric field ranged from 1 MHz to 16 MHz, using a Q meter with coaxial probe. It was concluded that conductivity, relative permittivity and loss tangent increased with an increase in moisture content, and dielectric constant and loss tangent decreased as the frequency of electric field increased.

  3. Property development in the countryside

    DEFF Research Database (Denmark)

    Sørensen, Esben Munk; Mouritsen, Anne Kristine Munk; Staunstrup, Jan K.

    2004-01-01

    In Denmark rural areas is undergoing af rapid change from pure agriculture and forest to a mix between still bigger industrial farms and properties and small holdings for housing only, parttime farming and small industries in former agricultural buildings. In the seventies the national policy...... of housing and trade, industry different from agriculture. This integrated urbanization and industrialization of rural areas is a new challenge for chartered surveyors in Denmark. The surveying profession and their capacity of advisory to the owners of holdings in the countryside play a central role...... in transformation of ownership to land and properties. Field studies have documented how the individual expanding farmers acts strategically in the local battle of more land to build up a still more productive and efficient agricultural enterprise. The raising demand for land is also catalysed by the new land...

  4. Properties of BL Lac objects

    International Nuclear Information System (INIS)

    Wolfe, A.M.; Pittsburgh, University, Pittsburgh, Pa.)

    1980-01-01

    The properties of BL Lacertae objects are examined in light of their recently realized similarities to quasars and associations with galactic radiation. The criteria typically used to define BL Lac objects are analyzed, with attention given to radio spectra, optical continual, radio and optical variability, optical polarization and emission lines, and evidence that BL Lac objects and optically violent variables represent the most compact and strongly variable sources among the general class of quasars is discussed. Connections between BL Lac objects and the galaxies in which they have been observed to be embedded are discussed and it is pointed out that no low-luminosity quasars have been found to be associated with first-ranked giant ellipticals. Future observations which may clarify the properties and relationships of BL Lac objects are indicated

  5. Properties of plastic filtration material

    Energy Technology Data Exchange (ETDEWEB)

    Paluch, W.

    1988-01-01

    Discusses properties of filters made of thermoplastic granulated material. The granulated plastic has a specific density of 10.3-10.6 kN/m/sup 3/ and a bulk density of about 6 kN/m/sup 3/. Its chemical resistance to acids, bases and salts is high but is it soluble in organic solvents. Filters made of this material are characterized by a porosity coefficient of 36.5% and a bulk density of 5.7-6.8 kN/m/sup 3/. Physical and mechanical properties of filter samples made of thermoplastic granulated material (50x50x50 mm) were investigated under laboratory conditions. Compression strength and influencing factors were analyzed (ambient temperature, manufacturing technology). Tests show that this filtration material developed by Poltegor is superior to other filtration materials used in Poland.

  6. Accelerated Characterization of Polymer Properties

    Energy Technology Data Exchange (ETDEWEB)

    R. Wroczynski; l. Brewer; D. Buckley; M. Burrell; R. Potyrailo

    2003-07-30

    This report describes the efforts to develop a suite of microanalysis techniques that can rapidly measure a variety of polymer properties of industrial importance, including thermal, photo-oxidative, and color stability; as well as ductility, viscosity, and mechanical and antistatic properties. Additional goals of the project were to direct the development of these techniques toward simultaneous measurements of multiple polymer samples of small size in real time using non-destructive and/or parallel or rapid sequential measurements, to develop microcompounding techniques for preparing polymers with additives, and to demonstrate that samples prepared in the microcompounder could be analyzed directly or used in rapid off-line measurements. These enabling technologies are the crucial precursors to the development of high-throughput screening (HTS) methodologies for the polymer additives industry whereby the rate of development of new additives and polymer formulations can be greatly accelerated.

  7. Properties of cryobrines on Mars

    DEFF Research Database (Denmark)

    Möhlmann, D.; Thomsen, Kaj

    2011-01-01

    Brines, i.e. aqueous salty solutions, increasingly play a role in a better understanding of physics and chemistry (and eventually also putative biology) of the upper surface of Mars. Results of physico-chemical modeling and experimentally determined data to characterize properties of cryobrines...... of potential interest with respect to Mars are described. Eutectic diagrams, the related numerical eutectic values of composition and temperature, the water activity of Mars-relevant brines of sulfates, chlorides, perchlorides and carbonates, including related deliquescence relative humidity, are parameters...... and properties, which are described here in some detail. The results characterize conditions for liquid low-temperature brines ("cryobrines") to evolve and to exist, at least temporarily, on present Mars. (C) 2010 Elsevier Inc. All rights reserved....

  8. Dynamic properties of ceramic materials

    International Nuclear Information System (INIS)

    Grady, D.E.

    1995-02-01

    The present study offers new data and analysis on the transient shock strength and equation-of-state properties of ceramics. Various dynamic data on nine high strength ceramics are provided with wave profile measurements, through velocity interferometry techniques, the principal observable. Compressive failure in the shock wave front, with emphasis on brittle versus ductile mechanisms of deformation, is examined in some detail. Extensive spall strength data are provided and related to the theoretical spall strength, and to energy-based theories of the spall process. Failure waves, as a mechanism of deformation in the transient shock process, are examined. Strength and equation-of-state analysis of shock data on silicon carbide, boron carbide, tungsten carbide, silicon dioxide and aluminum nitride is presented with particular emphasis on phase transition properties for the latter two. Wave profile measurements on selected ceramics are investigated for evidence of rate sensitive elastic precursor decay in the shock front failure process

  9. Statistical properties of reactor antineutrinos

    CERN Document Server

    Rusov, V D; Tarasov, V O; Shaaban, Y

    2002-01-01

    Based on the properties of the cascade statistics of reactor antineutrinos, the efficient method of searching for neutrino oscillations is offered. The determination of physical parameters of this statistics, i.e. the average number of fissions and the overage number of antineutrinos per fission, requires no a priori knowledge of the geometry and characteristics of the detector, the reactor power, and composition of nuclear fuel.

  10. Property Rights, Restrictions and Responsibilities

    DEFF Research Database (Denmark)

    Enemark, Stig

    more to a social, ethical commitment or attitude to environmental sustainability and good husbandry. This paper provides an overall understanding of the concept of land administration systems for dealing with rights, restrictions and responsibilities in future spatially enabled government. Finally......Land Administration Systems are the basis for conceptualizing rights, restrictions and responsibilities related to people, policies and places. Property rights are normally concerned with ownership and tenure whereas restrictions usually control use and activities on land. Responsibilities relate...

  11. Properties of squeezed Schroedinger cats

    International Nuclear Information System (INIS)

    Obada, A.S.F.; Omar, Z.M.

    1995-09-01

    In this article we investigate some statistical properties of the even and odd squeezed (squeezed Schroedinger cat) states. The quasi-probability distribution functions especially W(α) and Q(α) are calculated and discussed for these states. The phase distribution function is discussed. A generation scheme is proposed for either the squeezed generalized Schroedinger cat, or the squeezed number state. (author). 35 refs, 5 figs

  12. Mechanical properties of irradiated materials

    International Nuclear Information System (INIS)

    Robertson, I.M.; Robach, J.; Wirth, B.

    2001-01-01

    The effect of irradiation on the mechanical properties of metals is considered with particular attention being paid to the development of defect-free channels following uniaxial tensile loading. The in situ transmission electron microscope deformation technique is coupled with dislocation dynamic computer simulations to reveal the fundamental processes governing the elimination of defects by glissile dislocations. The observations of preliminary experiments are reported.(author)

  13. Properties of singular integral operators

    Indian Academy of Sciences (India)

    Amit Samanta

    2018-03-22

    Mar 22, 2018 ... the Toeplitz operator. Tφ on H2 is defined by Tφ( f ) = P(φf ) for all f ∈ H2. The following mentioned properties of the Topelitz operator are well-known and can be found in Chapter 3 and. Chapter 1 of [3]. •Tφ = spectral radius of Tφ =φ ∞. • The commutant of the unilateral shift acting on H2 is Tφ such that φ ...

  14. Review of tau lepton properties

    International Nuclear Information System (INIS)

    Feldman, G.J.

    1978-11-01

    The review of tau particle properties includes measurements of the branching ratios, the general modes, then a more detailed look at the semi-hadronic modes, and the upper limits for rare modes. Measurements of the tau mass, spin, and lifetime, the tau - ν/sub tau/ coupling and the ν/sub tau/ are considered mass. Finally, the lepton classification of the tau is discussed. 43 references

  15. Sensory properties of irradiated foods

    International Nuclear Information System (INIS)

    Plestenjak, A.

    1997-01-01

    Food irradiation is a simple and effective preservation technique. The changes caused by irradiation depend on composition of food, on the absorbed dose, the water content and temperature during and after irradiation. In this paper the changes of food components caused by irradiation, doses for various food irradiation treatments, foods and countries where the irradiation is allowed, and sensory properties of irradiated food are reviewed

  16. The properties of radio ellipticals

    International Nuclear Information System (INIS)

    Sparks, W.B.; Disney, M.J.; Rodgers, A.W.

    1984-01-01

    Optical and additional radio data are presented for the bright galaxies of the Disney and Wall survey (1977 Mon. Not. R. Astron. Soc. 179, 235). These data form the basis of a statistical comparison of the properties of radio elliptical galaxies to radio-quiet ellipticals. The correlations may be explained by the depth of the gravitational potential well in which the galaxy resides governing the circumstances under which an elliptical galaxy rids itself of internally produced gas. (author)

  17. Thixotropic Properties of Latvian Clays

    OpenAIRE

    Lakevičs, Vitālijs; Stepanova, Valentīna; Ruplis, Augusts

    2015-01-01

    This research studies Latvia originated Devon (Tūja, Skaņkalne), quaternary (Ceplīši), Jurassic, (Strēļi) and Triassic (Vadakste) deposit clays as well as Lithuania originated Triassic (Akmene) deposit clays. Thixotropic properties of clay were researched by measuring relative viscosity of clay in water suspensions. Relative viscosity is measured with a hopper method. It was detected that, when concentration of suspension is increased, clay suspension’s viscosity also increases. It happens un...

  18. Physical Properties of Latvian Clays

    OpenAIRE

    Jurgelāne, I; Stepanova, V; Ločs, J; Mālers, J; Bērziņa-Cimdiņa, L

    2012-01-01

    Physical and chemical properties of clays mostly depends on its mineral and chemical composition, particle size and pH value. The mutual influence of these parameters is complex. Illite is the most abundant clay mineral in Latvia and usually used in building materials and pottery. The viscosity and plasticity of Latvian clays from several deposits were investigated and correlated with mineral composition, particle size and pH value. Fractionated and crude clay samples were used. The p...

  19. Thermodynamical properties of 56Fe

    International Nuclear Information System (INIS)

    Tavukcu, E.; Becker, J. A.; Bernstein, L. A.; Garrett, P. E.; Younes, W.; Guttormsen, M.; Rekstad, J.; Siem, S.; Mitchell, G. E.; Schiller, A.; Voinov, A.

    2003-01-01

    Average nuclear level densities close to the nuclear binding energy in 56Fe and 57Fe are extracted from primary γ-ray spectra. A step structure is observed in the level density for both isotopes, and is interpreted as breaking of Cooper pairs. Thermal properties of 56Fe are studied within the statistical canonical ensemble. The experimental heat capacity in 56Fe is compared with the theoretical heat capacity calculated within the shell model Monte Carlo approach

  20. Physicochemical properties of maca starch.

    Science.gov (United States)

    Zhang, Ling; Li, Guantian; Wang, Sunan; Yao, Weirong; Zhu, Fan

    2017-03-01

    Maca (Lepidium meyenii Walpers) is gaining research attention due to its unique bioactive properties. Starch is a major component of maca roots, thus representing a novel starch source. In this study, the properties of three maca starches (yellow, purple and black) were compared with commercially maize, cassava, and potato starches. The starch granule sizes ranged from 9.0 to 9.6μm, and the granules were irregularly oval. All the maca starches presented B-type X-ray diffraction patterns, with the relative degree of crystallinity ranging from 22.2 to 24.3%. The apparent amylose contents ranged from 21.0 to 21.3%. The onset gelatinization temperatures ranged from 47.1 to 47.5°C as indicated by differential scanning calorimetry. Significant differences were observed in the pasting properties and textural parameters among all of the studied starches. These characteristics suggest the utility of native maca starch in products subjected to low temperatures during food processing and other industrial applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Additive property of separative power

    International Nuclear Information System (INIS)

    Yamamoto, Ichiro; Kanagawa, Akira

    1980-01-01

    A separative power of a separating element, whose heads and tails separation factors are α and β, is expressed by phi sub(b)(α, β) = [α(β - 1)1n α - (α - 1)1n β]/(αβ - 1) for the unit flow of the desired material and phi sub(a)(α, β) (= phi sub(b)(β, α)) for that of undesired material. The additive properties of the functions phi sub(b) and phi sub(a) were demonstrated by calculations of various types of ideal cascades, but the origin of the property is not obvious. The present study has furnished the mathematical basis of the additivity based on the special functional equation. First, for symmetric processes (α = β), the functional equation which describes the function representing the quality of separation f(α, α) concerning the desired material was obtained and solved to give the functional form of f(α, α). The result was extented to the function f(α, β) representing the quality of asymmetric separation (α not equal β). The derived function f(α, β) was demonstrated to be equal to phi sub(b)(α, β), and it was verified that functions phi sub(b)(α, β) and phi sub(a)(α, β) have the additive property in themselves. (author)

  2. Cadmium colours: composition and properties

    International Nuclear Information System (INIS)

    Paulus, J.; Knuutinen, U.

    2004-01-01

    The composition and the properties of cadmium aquarelle colours are discussed. The examined colours were 24 different aquarelle cadmium colours from six different manufacturers. The colours ranged from light, bright yellows to dark, deep-red tones. The aim of this research was to find out if the pigments contain cadmium salts: sulphides and/or selenides. This information will help in choosing watercolours in conservation processes. Today, aquarelle colours not containing cadmium pigments are being sold as cadmium colours; thus their properties might be different from actual cadmium colours. The aim of the research was to verify that the colour samples contained cadmium pigments and to estimate their compositions and ageing properties. Element analyses were performed from colour samples using micro-chemical tests and X-ray fluorescence measurements. Thin-layer chromatography was used for analysing gum Arabic as a possible binding medium in the chosen colour samples. Through ageing tests, the resistance of the colour samples to the exposure to light, heat and humidity was studied. Visible-light spectroscopy was used in determining the hues and hue changes of the aquarelle colour samples. The spectrophotometer used the CIE L * a * b * tone colour measuring system. From the colour measurements the changes in the lightness/darkness, the redness, the yellowness and the saturation of the samples were examined. (orig.)

  3. Thermophysical Properties of GRCop-84

    Science.gov (United States)

    Ellis, David L.; Keller, Dennis J.; Nathal, Michael (Technical Monitor)

    2000-01-01

    The thermophysical properties and electrical resistivity of GRCop-84 (Cu - 8 at.% Cr-4 at.% Nb) were measured from cryogenic temperatures to near its melting point. The data were analyzed using weighted regression to determine the properties as a function of temperature and assign appropriate confidence intervals. The results showed that the thermal expansion of GRCop-84 was significantly lower than NARloy-Z (Cu-3 wt. % Ag-0.5 wt. % Zr), the currently used thrust cell liner material. The lower thermal expansion is expected to translate into lower thermally induced stresses and increases in thrust cell liner lives between 2X and 41X over NARloy-Z. The somewhat lower thermal conductivity of GRCop-84 can be offset by redesigning the liners to utilize its much greater mechanical properties. Optimized designs are not expected to suffer from the lower thermal conductivity. Electrical resistivity data, while not central to the primary application, show that GRCop-84 has potential for applications where a combination of good electrical conductivity and strength is required.

  4. Disentanglement of Electromagnetic Baryon Properties

    Science.gov (United States)

    Sadasivan, Daniel; Doring, Michael

    2017-01-01

    Through recent advances in experimental techniques, the precise extraction of the spectrum of baryonic resonances and their properties becomes possible. Helicity couplings at the resonance pole are fundamental parameters describing the electromagnetic properties of resonances and enabling the comparison of theoretical models with data. We have extracted them from experiments carried out at Jefferson Lab and other facilities using a multipole analysis within the Julich-Bonn framework. Special attention has been paid to the uncertainties and correlations of helicity couplings. Using the world data on the reaction γp -> ηp , we have calculated, for the first time, the covariance matrix. Our results are useful in several ways. They quantify uncertainties but also correlations of helicity couplings. Second, they can tell us quantitatively how useful a given polarization measurement is. Third, they can tell us how the measurement of a new observable would constrain and disentangle the resonance properties which could be helpful in the design of new experiments. Finally, on the subject of the missing resonance problem, model selection techniques and statistical tests allow us to quantify the significance of whether a resonance exists. Supported by NSF CAREER Grant No. PHY-1452055, NSF PIF Grant No. 1415459, by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC05-06OR23177, and by Research Center Julich through the HPC grant jikp07.

  5. In Situ elastic property sensors

    International Nuclear Information System (INIS)

    Olness, D.; Hirschfeld, T.; Kishiyama, K.; Steinhaus, R.

    1987-01-01

    Elasticity is an important property of many materials. Loss of elasticity can have serious consequences, such as when a gasket deteriorates and permits leakage of an expensive or hazardous material, or when a damping system begins to go awry. Loss of elasticity can also provide information related to an ancillary activity such as degradation of electrical insulation, loss of plasticizer in a plastic, or changes in permeability of a thin film. In fact, the mechanical properties of most organic compounds are altered when the compound degrades. Thus, a sensor for the mechanical properties can be used to monitor associated characteristics as well. A piezoelectric material in contact with an elastomer forms an oscillating system that can provide real-time elasticity monitoring. This combination constitutes a forced harmonic oscillator with damping provided by the elastomer. A ceramic oscillator with a total volume of a few mm 3 was used as an elasticity sensor. It was placed in intimate contact with an elastomer and then monitored remotely with a simple oscillator circuit and standard frequency counting electronics. Resonant frequency shifts and changes in Q value were observed corresponding to changes in ambient temperature and/or changes in pressure applied to the sample. Elastomer samples pretreated with ozone (to simulate aging) showed changes in Q value and frequency response, even though there were no visible changes in the elastic samples

  6. Some Cavitation Properties of Liquids

    Directory of Open Access Journals (Sweden)

    K. D. Efremova

    2016-01-01

    Full Text Available Cavitation properties of liquid must be taken into consideration in the engineering design of hydraulic machines and hydro devices when there is a possibility that in their operation an absolute pressure in the liquid drops below atmospheric one, and for a certain time the liquid is in depression state. Cold boiling, which occurs at a comparatively low temperature under a reduced absolute pressure within or on the surface of the liquid is regarded as hydrostatic cavitation if the liquid is stationary or as hydrodynamic cavitation, if the liquid falls into conditions when in the flow cross-section there is a sharply increasing dynamic pressure and a dropping absolute pressure.In accordance with the theory of cavitation, the first phase of cavitation occurs when the absolute pressure of the degassed liquid drops to the saturated vapour pressure, and the air dissolved in the liquid, leaving the intermolecular space, is converted into micro-bubbles of combined air and becomes a generator of cavitation “nuclei”. A quantitative estimate of the minimum allowable absolute pressure in a real, fully or partially degassed liquid at which a hydrostatic cavitation occurs is of practical interest.Since the pressure of saturated vapour of a liquid is, to a certain extent, related to the forces of intermolecular interaction, it is necessary to have information on the cavitation properties of technical solutions, including air solution in a liquid, as a solute may weaken intermolecular bonds and affect the pressure value of the saturated solvent vapour. In the experiment to carry out vacuum degassing of liquids was used a hydraulic air driven vacuum pump.The paper presents hydrostatic and hydrodynamic degassing liquid processes used in the experiment.The experimental studies of the cavitation properties of technical liquids (sea and distilled water, saturated NaCl solution, and pure glycerol and as a 49/51% solution in water, mineral oil and jet fuel enabled

  7. New hydride compounds of 1,4-diazabicyclo[2.2.2]octane and its dication with borine and tetrahydridoborate anion and products of their transformations; Novye gidridnye soedineniya 1,4-diazabitsiklo[2.2.2]oktana i ego dikationa s borinom i tetergidridoborat-anionom i produkty ikh prevrashcheniya

    Energy Technology Data Exchange (ETDEWEB)

    Shevchenko, Yu N; Yashina, N I; Markova, O Z; Trachevskij, V V

    1997-12-31

    New compounds [dabcoH{sub 2}](BH{sub 4}){sub 2}, dabco(BH{sub 3}){sub 2}2H{sub 2}, [dabco(BH{sub 3}){sub 2}H{sub 2}]{sub n} have been synthesized by means of interaction between dihydrochloride of 1,4-diazobicyclo[2.2.2] octane (dabco) and NaBH{sub 4} in the medium of nonaqueous solvents (glyme, diglyme, tetrahydrofuran, dimethylsulfoxide) and identified by the methods of element analysis, conductometry, {sup 1}H, {sup 11}B, {sup 14}N NMR, IR spectroscopy and thermal analysis. A mechanism is suggested and the conditions are defined for mutual transformations of the compounds studied. Their ability to bind reversibly molecular hydrogen has been revealed for the first time. 19 refs.; 3 figs.; 1 tab.

  8. New Instruments and Principles for the Dimensional Measurement and Measurement of Spacing of Reactor Components; Nouveaux Instruments et Procedes de Mesure des Dimensions et de l'Espacement des Elements d'un Reacteur; Novye pribory i printsipy izmereniya razmerov i raspolozheniya komponentov reaktora; Nuevos Instrumentos y Principios para Medir las Dimensiones y la Separacion Entre Componentes de Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, P. [Institut Dr. Foerster, Reutlingen, Federal Republic of Germany (Germany)

    1965-09-15

    Full text: The measurement of wall thickness of austenitic and non-ferrous sheets, tubes and containers is presented. Two methods for contactless measurement are discussed: eddy- current method for measuring the thickness of non-ferrous and austenitic sheets and containers by means of transition coils; eddy-current measurement of the wall thickness of tubes by means of feed-through coils. Suitable instruments and their application are shown. Wall-thickness measurement on non-ferrous reactor assemblies by the ''magnetic ball method'' is also discussed. The principle of this new type of measurement is explained, its range of use - especially for spot- measurements - is discussed, and a practical instrument is described. Measurement of non-magnetic coatings on magnetic base materials is discussed. The measurement principles (magnetic DC and AC field methods) are explained and instruments for measurement of nonmagnetic coatings between 3-{mu}m and 20-mm thickness are shown. The special problem of measurement of stellite deposits on ferritic walls of reactor vessels is discussed. The measurement of electrically non-conductive coatings on base materials consisting of non-ferrous metals; and the principle of measurement (eddy currents) are explained. An instrument for this purpose is shown and typical examples of measurements are given. Contactless in-line measurements of physical dimensions of metallic reactor components are given. Various methods for ferrous and non-ferrous metals are explained (magnetic DC and AC field method, eddy-current methods). Instruments and examples for remote measurements of diameter, ovality, distortion etc., of reactor components are described, and methods of measuring the spacing of such components in the ''hot'' zone of the reactor are shown. An instrument for recording the surface profile and for direct reading the roughness values (''Rauhtiefe'', ''Glaettungstiefe'', CLA value and RMS value) is shown. Typical examples of the use of the instrument for reactor components are discussed. Special attention is given to the possibility of using a small and versatile pick-up by means of manipulators in the ''hot'' zones and on ''hot'' materials. The increase of surface roughness with increasing irradiation dose is discussed. (author) [French] Full text: L'auteur presente les problemes de mesure de l'epaisseur de feuilles et des parois de tubes et recipients en aciers austenitiques ou en metaux non ferreux. Deux methodes de mesure des epaisseurs sans contact sont discutees: la mesure, par courants de Foucault, de l'epaisseur de feuilles et des parois de recipients en metaux non ferreux ou en aciers austenitiques, au moyen de bobines se deplacant le long des pieces a examiner: la mesure, par courants de Foucault, de l'epaisseur des parois de tubes, au moyen de bobines dans lesquelles se deplacent les pieces a examiner. L'auteur decrit des instruments appropries et le mode d'utilisation. Il discute egalement la mesure de l'epaisseur des parois de parties constitutives de reacteurs, en metaux non ferreux, par la 'methode de la bille magnetique' et explique le principe de ce nouveau type de mesure et son domaine d'utilisation - notamment pour les mesures par points; il decrit un instrument approprie. L'auteur examine la mesure des revetements non magnetiques de materiaux magnetiques; il explique les principes de mesure (methodes fondees sur les champs magnetiques des courants continus et des courants alternatifs) et decrit des instruments de mesure de revetements non magnetiques dont l'epaisseur varie entre 3 {mu}m et 20 mm. Il expose le probleme special de la mesure des depots de stellite sur les parois en aciers ferritiques des cuves de reacteurs. La mesure des revetements non conducteurs de metaux non ferreux est etudiee. Le memoire explique le principe de mesure (courants de Foucault). Il decrit un instrument approprie et donne des exemples de mesures typiques. L'auteur examine egalement la mesure sans contact, en continu, des dimensions de parties constitutives metalliques de reacteurs et explique diverses methodes de mesure pour les metaux terreux et non terreux (champs magnetiques des courants continus et des courants alternatifs, courants de Foucault). Il decrit des instruments et donne des exemples de mesure telecommandee du diametre, de l'ovalisation, de la distorsion, etc., de diverses pieces; il expose des methodes de mesure de l'espacement des elements de la zone active du reacteur. Le memoire decrit un instrument permettant d'enregistrer le profil de surface et de faire la lecture directe des valeurs de la rugosite (profondeur de rugosite, degre de polissage, direction des irregularites et valeur quadratique moyenne). Il donne des exemples typiques d'emploi de cet instrument pour les pieces d'un reacteur. L'auteur traite en particulier de la possibilite d'utiliser un petit lecteur polyvalent, a l'aide de manipulateurs, dans les zones actives et pour les matieres 'chaudes'. Il discute l'augmentation de la rugosite de surface en fonction de l'accroissement de l'irradiation. (author) [Spanish] Full text: El autor presenta los problemas de medicion del espesor de hojas y de paredes de tubos y recipientes de material austenftico y no ferroso. Se exponen dos metodos para medir el espesor de paredes sin usar elementos en contacto con las mismas: el metodo de las corrientes de Foucault para medir el espesor de hojas y recipientes de material no ferroso y austenftico, empleando bobinas de transicion, y el empleo de corrientes de Foucault para medir espesores de pared en tubos mediante bobinas anulares extensivas. Se describen los instrumentos adecuados y sus aplicaciones. El autor discute ademas la medicion de espesores de pared en componentes no ferrosos para reactores mediante el 'metodo de la esfera magnetica' y explica el principio de este nuevo procedimiento de medicion, se analiza su alcance, sobre todo para mediciones localizadas, y se describe un instrumento utilizado en la practica. Se examina la medicion de recubrimientos no magneticos aplicados sobre materiales magneticos, se explican los principios de la medicion (metodos de campo magnetico con corriente continua y alterna) y se describen instrumentos para medir recubrimientos no magneticos de espesor comprendido entre 3 {mu}m y 20 mm. Se analiza el problema especial de medir depositos de estelita sobre paredes ferrnicas de recipientes de reactor. Se estudia la medicion de recubrimientos no conductores, aplicados sobre metales no ferrosos. Se explica el principio de medicion (corrientes de Foucault), se describe un instrumento destinado a este fin y se dan ejemplos tfpicos de. mediciones. El autor examina tambien la medicion de dimensiones ffsicas de los componentes metalicos de reactores, sin elementos en contacto con los mismos y describe diversos metodos aplicables a metales ferrosos y no ferrosos (metodo del campo magnetico con corriente continua y alterna, metodo de corrientes de Foucault), Se describen instrumentos y se dan ejemplos de mediciones a distancia del diametro, ovalidad, distorsion, etc., de componentes de reactor. Se exponen metodos para medir la separacion entre tales componentes, en la zona radiactiva del reactor. Se describe un instrumento para registrar perfiles de superficies y para indicacion directa de valores de aspereza ('Rauhtiefe', 'Glaettungstiefe', valor promedio y valor cuadratico medio). Se analizan ejemplos tfpicos del empleo de este instrumento para componentes de reactor. Se presta especial atencion a la posibilidad de usar un captador pequeno y de aplicaciones multiples mediante manipuladores en zonas y en materiales radiactivos. Se analiza el aumento de la aspereza superficial en funcion de la dosis de irradiacion. (author) [Russian] Full text: Rassmatrivaetsja izmerenie tolshhiny listov i tolshhiny stenok trub i kontejnerov iz austenitnyh i cvetnyh metallov. Obsuzhdajutsja dva metoda beskontaktnogo izmerenija tolshhiny stenok: a) metod vihrevyh tokov dlja izmerenija tolshhiny listov i kontejnerov iz cvetnyh i austenitnyh metallov s pomoshh'ju perehodnyh katushek; b) metod vihrevyh tokov dlja izmerenija tolshhiny stenok trub s pomoshh'ju prohodnyh katushek. Opisyvajutsja prigodnye dlja jetogo pribory i ih primenenie. Izmerenie tolshhiny stenok uzlov reaktora iz cvetnyh metallov po 'metodu magnitnogo sharai . Ob'jasnjaetsja princip jetogo novogo vida izmerenij, oblast' ego primenenija (osobenno dlja tochechnyh izmerenij) i opisyvaetsja primenjaemyj na praktike pribor. Izmerenie materialov nemagnitnyh pokrytij na magnitnoj osnove. Ob'jasnjajutsja principy izmerenij (metody magnitnogo polja postojannogo toka i peremennogo toka) i opisyvajutsja pribory dlja izmerenija nemagnitnyh pokrytij tolshhinoj ot 3 mikron do 20 mm. Osobo rassmatrivaetsja problema otlozhenija stellita na ferritnyh stenkah korpusov reaktorov. Izmerenie pokrytij, neprovodjashhih jelektrichestvo,-na materialah iz cvetnyh metallov. Ob'jasnjaetsja princip takogo izmerenija (vihrevye toki). Opisyvaetsja pribor dlja .takih izmerenij i tipichnye primery izmerenij. Privodjatsja beskontaktnye tehnologicheskie izmerenija fizicheskih razmerov metallicheskih komponentov reaktora. Ob{sup j}asnjajutsja razlichnye metody izmerenija chernyh i cvetnyh metallov (metod magnitnogo polja postojannogo toka i peremennogo toka, metody vihrevyh tokov). Opisyvajutsja pribory i primery distancionnogo izmerenija diametra oval'nosti, iskazhenija i t.d. komponentov reaktora. Opisyvajutsja metody opredelenija raspolozhenija takih komponentov v 'gorjachej' zone reaktora. ' Opisyvaetsja pribor dlja registracii profilja poverhnosti i neposredstvennogo opredelenija haraktera nerovnosti (''Rauhtiefe'', ''Glaettungstiefe'', GLA value i RMS value). Rassmatrivajutsja tipichnye primery ispol'zovanija jetogo pribora opredelenija nerovnostej komponentov reaktora. Osoboe vnimanie udeljaetsja vozmozhnosti ispol'zovanija nebol'shogo universal'nogo datchika v ''gorjachih'' zonah i ''gorjachih'' materialah. Rassmatrivaetsja vopros ob uvelichenii nerovnostej poverhnosti pri uvelichenii doz obluchenija. (author)

  9. Evaluation of properties of low activation Mn-Cr steel (2). Physical properties and aging properties

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Shigeru; Fukaya, Kiyoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Ishiyama, Shintaro [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Sato, Ikuo; Kusuhashi, Mikio; Hatakeyama, Takeshi [Japan Steel Works Ltd., Muroran, Hokkaido (Japan). Muroran Plant; Takahashi, Heishichiro [Hokkaido Univ., Sapporo (Japan); Kikuchi, Mitsuru [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

    2000-08-01

    The JT-60SU (Super Upgrade) program is under discussion at JAERI. Its design optimization activity requires the vacuum vessel material to be non-magnetic, very strong and with low induced activation. However, there is no suitable material available to fulfill all the requirements. JAERI started to develop a new material for the vacuum vessel together with the Japan Steel Works LTD. (JSW). Chemical composition and metallurgical processes were optimized and a new steel named VC9, which has the composition of Cr :16wt%, Mn :15.5wt%, C :0.2wt%, N :0.2wt% with nonmagnetic single {gamma} phase, was selected as a candidate material. Here, physical properties and aging properties of VC9 were studied and the results were compared with those of 316L stainless steel. (author)

  10. Equationally Noetherian property of Ershov algebras

    OpenAIRE

    Dvorzhetskiy, Yuriy

    2014-01-01

    This article is about equationally Noetherian and weak equationally Noetherian property of Ershov algebras. Here we show two canonical forms of the system of equations over Ershov algebras and two criteria of equationally Noetherian and weak equationally Noetherian properties.

  11. Mechanisms for development of property rights institutions

    Directory of Open Access Journals (Sweden)

    Žarković Jelena

    2006-01-01

    Full Text Available The institution of property rights is increasingly recognized as an essential building block of an economically prosperous society. The question that remains unsolved, however, is how do we develop effective property rights institutions? The literature dealing with the development of property rights tends to be, in general, an optimistic one since there is a tendency to view the design of property rights institutions as maximizing decisions to economize on transaction costs and to facilitate new economic activities. On the other hand, since property rights define the distribution of wealth and political power in a society, changes in property rights structures are likely to be influenced by more than pure efficiency considerations. Therefore, in order to achieve a balanced analysis of the evolution of property rights institutions, the model of endogenous property rights creation should be modified. We did that by introducing the neoinstitutional theory of the state in the model.

  12. Inventory of Owned and Leased Properties (IOLP)

    Data.gov (United States)

    General Services Administration — The Inventory of Owned and Leased Properties (IOLP) allows users to search properties owned and leased by the General Services Administration (GSA) across the United...

  13. Best Practices for Real Property Management

    Science.gov (United States)

    2016-04-21

    rehabilitations ; and other structures and facilities. Real property does not include personal property (weapons systems and other military equipment Repair To...sanitary landfills , sewage treatment, heat distribution lines, heat production plants Operations & Training Aviation runways and ramps, piers and

  14. Influence of Macroeconomic Factors on Residential Property ...

    African Journals Online (AJOL)

    Sultan

    exerted by macroeconomic factors on residential property returns in Abuja. The backward .... explanatory power and positive influence of employment and ...... Project. Management In Property Development: the Nigeria experience. Ibadan:.

  15. Fundamentals of semiconductors physics and materials properties

    CERN Document Server

    Yu, Peter Y

    2005-01-01

    Provides detailed explanations of the electronic, vibrational, transport, and optical properties of semiconductors. This textbook emphasizes understanding the physical properties of Si and similar tetrahedrally coordinated semiconductors and features an extensive collection of tables of material parameters, figures, and problems.

  16. Properties of the Top Quark

    Energy Technology Data Exchange (ETDEWEB)

    Wicke, Daniel; /Wuppertal U., Dept. Math.

    2009-08-01

    The aim of particle physics is the understanding of elementary particles and their interactions. The current theory of elementary particle physics, the Standard Model, contains twelve different types of fermions which (neglecting gravity) interact through the gauge bosons of three forces. In addition a scalar particle, the Higgs boson, is needed for theoretical consistency. These few building blocks explain all experimental results found in the context of particle physics, so far. Nevertheless, it is believed that the Standard Model is only an approximation to a more complete theory. First of all the fourth known force, gravity, has withstood all attempts to be included until now. Furthermore, the Standard Model describes several features of the elementary particles like the existence of three families of fermions or the quantisation of charges, but does not explain these properties from underlying principles. Finally, the lightness of the Higgs boson needed to explain the symmetry breaking is difficult to maintain in the presence of expected corrections from gravity at high scales. This is the so called hierarchy problem. In addition astrophysical results indicate that the universe consists only to a very small fraction of matter described by the Standard Model. Large fractions of dark energy and dark matter are needed to describe the observations. Both do not have any correspondence in the Standard Model. Also the very small asymmetry between matter and anti-matter that results in the observed universe built of matter (and not of anti-matter) cannot be explained until now. It is thus an important task of experimental particle physics to test the predictions of the Standard Model to the best possible accuracy and to search for deviations pointing to necessary extensions or modifications of our current theoretical understanding. The top quark was predicted to exist by the Standard Model as the partner of the bottom quark. It was first observed in 1995 by the

  17. Properties of the Top Quark

    International Nuclear Information System (INIS)

    Wicke, Daniel

    2009-01-01

    The aim of particle physics is the understanding of elementary particles and their interactions. The current theory of elementary particle physics, the Standard Model, contains twelve different types of fermions which (neglecting gravity) interact through the gauge bosons of three forces. In addition a scalar particle, the Higgs boson, is needed for theoretical consistency. These few building blocks explain all experimental results found in the context of particle physics, so far. Nevertheless, it is believed that the Standard Model is only an approximation to a more complete theory. First of all the fourth known force, gravity, has withstood all attempts to be included until now. Furthermore, the Standard Model describes several features of the elementary particles like the existence of three families of fermions or the quantisation of charges, but does not explain these properties from underlying principles. Finally, the lightness of the Higgs boson needed to explain the symmetry breaking is difficult to maintain in the presence of expected corrections from gravity at high scales. This is the so called hierarchy problem. In addition astrophysical results indicate that the universe consists only to a very small fraction of matter described by the Standard Model. Large fractions of dark energy and dark matter are needed to describe the observations. Both do not have any correspondence in the Standard Model. Also the very small asymmetry between matter and anti-matter that results in the observed universe built of matter (and not of anti-matter) cannot be explained until now. It is thus an important task of experimental particle physics to test the predictions of the Standard Model to the best possible accuracy and to search for deviations pointing to necessary extensions or modifications of our current theoretical understanding. The top quark was predicted to exist by the Standard Model as the partner of the bottom quark. It was first observed in 1995 by the

  18. Immunological properties of gold nanoparticles.

    Science.gov (United States)

    Dykman, Lev A; Khlebtsov, Nikolai G

    2017-03-01

    In the past decade, gold nanoparticles have attracted strong interest from the nanobiotechnological community owing to the significant progress made in robust and easy-to-make synthesis technologies, in surface functionalization, and in promising biomedical applications. These include bioimaging, gene diagnostics, analytical sensing, photothermal treatment of tumors, and targeted delivery of various biomolecular and chemical cargos. For the last-named application, gold nanoparticles should be properly fabricated to deliver the cargo into the targeted cells through effective endocytosis. In this review, we discuss recent progress in understanding the selective penetration of gold nanoparticles into immune cells. The interaction of gold nanoparticles with immune cell receptors is discussed. As distinct from other published reviews, we present a summary of the immunological properties of gold nanoparticles. This review also summarizes what is known about the application of gold nanoparticles as an antigen carrier and adjuvant in immunization for the preparation of antibodies in vivo . For each of the above topics, the basic principles, recent advances, and current challenges are discussed. Thus, this review presents a detailed analysis of data on interaction of gold nanoparticles with immune cells. Emphasis is placed on the systematization of data over production of antibodies by using gold nanoparticles and adjuvant properties of gold nanoparticles. Specifically, we start our discussion with current data on interaction of various gold nanoparticles with immune cells. The next section describes existing technologies to improve production of antibodies in vivo by using gold nanoparticles conjugated with specific ligands. Finally, we describe what is known about adjuvant properties of bare gold or functionalized nanoparticles. In the Conclusion section, we present a short summary of reported data and some challenges and perspectives.

  19. Nanofiber Manufacture, Properties, and Applications

    International Nuclear Information System (INIS)

    Lin, T.; Lukas, D.; Bhat, G.S.

    2013-01-01

    Nano fibers have shown many unique characteristics and enormous application potential in widely diverse areas. While considerable research has been conducted on exploring the properties and applications of nano fibers over the decade, the technology development for large-scale production of nano fibers has been hampered, which slows down the wide applications of nano fibers in practice. This special issue focuses on the recent progress in emerging nano fiber production techniques, such as needle less electro spinning, and novel properties and applications of nano fibers. It also covers unusual methods to process natural materials into nano fibrous materials. The special issue consists of four review articles and eighteen research papers. One review paper presents an overview of the recent developments in needle less electro spinning and the influences of needle less spinnerets on electro spinning process, nano fiber quality and productivity. The review also points out the challenges remaining for further research in this area. Other three reviews separately summarize the preparation, characterization and applications of ZnO nano wires and the applications of carbon nano fibers for neural electrical/chemical interfaces and for cement reinforcement. The research articles report new results of needle less electro spinning techniques, and novel methods to make bi component nano fibers, porous nano fibers, nano fiber hydrogel and chitin nan ofibrils. As Guest Editors for this special issue, we are pleased to see the progress in the applications of nano fibers, especially for sound absorption and for protective clothing, as well as the antibacterial properties of titanate nano fibers. We hope this special issue will promote further development of large-scale economically feasible nano fiber-making technologies, and also contribute to the wide use of nano fibers. We also hope that the articles collected in this special issue are well-received by the reader.

  20. Optical properties of nitride nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Cantarero, A.; Cros, A.; Garro, N.; Gomez-Gomez, M.I.; Garcia, A.; Lima, M.M. de [Materials Science Institute, University of Valencia, PO Box 22085, 46071 Valencia (Spain); Daudin, B. [Departement de Recherche Fondamentale sur la Matiere Condensee, SPMM, CEA/Grenoble, 17 Rue des Martyrs, 38054 Grenoble (France); Rizzi, A.; Denker, C.; Malindretos, J. [IV. Physikalisches Institut, Georg August Universitaet Goettingen, 37073 Goettingen (Germany)

    2011-01-15

    In this paper we review some recent results on the optical properties of nitride nanostructures, in particular on GaN quantum dots (QDs) and InN nanocolumns (NCs). First, we will give a brief introduction on the particularities of vibrational modes of wurtzite. The GaN QDs, embedded in AlN, were grown by molecular beam epitaxy (MBE) in the Stransky-Krastanov mode on c- and a-plane 6H-SiC. We have studied the optical properties by means of photoluminescence (PL) and performed Raman scattering measurements to analyze the strain relaxation in the dots and the barrier, the effect of the internal electric fields, and the influence of specific growth parameters, like the influence of capping or the spacer on the relaxation of the QDs. A theoretical model, based on continuous elastic theory, were developed to interpret the Raman scattering results. On the other hand, InN NCs have been grown by MBE in the vapor-liquid-solid mode using Au as a catalyst. The nanocolumns have different morphology depending on the growth conditions. The optical properties can be correlated to the morphology of the samples and the best growth conditions can be selected. We observe, from the analysis of the Raman data in InN NCs, the existence of two space regions contributing to the scattering: the surface and the inner region. From the inner region, uncoupled phonon modes are clearly observed, showing the high crystal quality and the complete relaxation of the NCs (no strain). The observation of a LO-phonon-plasmon couple in the same spectra is a fingerprint of the accumulation layer predicted at the surface of the nanocolumns. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  1. FINANCING INTELLECTUAL PROPERTY ASSESTS: AN EMPIRICAL ANALYSIS

    OpenAIRE

    USHA SWAMINATHAN

    2016-01-01

    Amplifying any property needs assessment to be marketable. This paper reads on the prospects of intangible property especially the Intellectual Property (IP) being evaluated in terms of financing by institutions to progressively grow more by widening their business and to make available advances based on IP. Arrangements engaging in the safety measures of intangible property encompassed and facilitated title-holders of IP privileges to comprise a loan of money as more undemanding and protecte...

  2. Development of international regulation of intellectual property

    OpenAIRE

    Schmitz Vaccaro, Christian

    2013-01-01

    In recent years we have seen a true internationalization of intellectual property laws. So today one can easily familiarize with foreign laws on intellectual property, due to their increasing uniformity and homogeneity. This is the result of numerous international treaties and two international organizations. At the multilateral level, the World Intellectual Property Organization (WIPO) administers 24 treaties on intellectual property, and for its part, the World Trade Organization (WTO) is i...

  3. COMBUSTION PROPERTIES OF EUCALYPTUS WOOD

    Directory of Open Access Journals (Sweden)

    Yalçın ÖRS

    1999-03-01

    Full Text Available In this study, the combustion properties of some impregnation materials (abiotic and biotic factors used for eucalyptus wood in interior or exterior environments were investigated. The experimental samples were prepared from Eucalyptus wood based on ASTM-D-1413-76 Tanalith-CBC, boric acid, borax, vacsol-WR, immersol-WR, polyethylen glycole-400 and ammonium sulphate were used as an impregnation material. The results indicated that, vacuum treatment on Eucalyptus gave the lowest retention value of salts. Compounds containing boron+salt increased fire resistance however water repellents decreased the wood flammability.

  4. Phonon properties of americium phosphide

    Energy Technology Data Exchange (ETDEWEB)

    Arya, B. S., E-mail: bsarya13@yahoo.com [Department of Physics, Govt. Narmada P G College, Hoshangabad -461001 (India); Aynyas, Mahendra [Department of Physics, C. S. A. Govt. P. G. College Sehore-46601 (India); Sanyal, S. P. [Department of Physics, Barkatullah University, Bhopal-462026 (India)

    2016-05-23

    Phonon properties of AmP have been studied by using breathing shell models (BSM) which includes breathing motion of electrons of the Am atoms due to f-d hybridization. The phonon dispersion curves, specific heat calculated from present model. The calculated phonon dispersion curves of AmP are presented follow the same trend as observed in uranium phosphide. We discuss the significance of this approach in predicting the phonon dispersion curves of these compounds and examine the role of electron-phonon interaction.

  5. Properties of the nuclear medium

    International Nuclear Information System (INIS)

    Baldo, M; Burgio, G F

    2012-01-01

    We review our knowledge on the properties of the nuclear medium that have been studied, over many years, on the basis of many-body theory, laboratory experiments and astrophysical observations. Throughout the presentation particular emphasis is placed on the possible relationship and links between the nuclear medium and the structure of nuclei, including the limitations of such an approach. First we consider the realm of phenomenological laboratory data and astrophysical observations and the hints they can give on the characteristics that the nuclear medium should possess. The analysis is based on phenomenological models, that however have a strong basis on physical intuition and an impressive success. More microscopic models are also considered, and it is shown that they are able to give invaluable information on the nuclear medium, in particular on its equation of state. The interplay between laboratory experiments and astrophysical observations is particularly stressed, and it is shown how their complementarity enormously enriches our insights into the structure of the nuclear medium. We then introduce the nucleon–nucleon interaction and the microscopic many-body theory of nuclear matter, with a critical discussion about the different approaches and their results. The Landau–Fermi liquid theory is introduced and briefly discussed, and it is shown how fruitful it can be in discussing the macroscopic and low-energy properties of the nuclear medium. As an illustrative example, we discuss neutron matter at very low density, and it is shown how it can be treated within the many-body theory. The general bulk properties of the nuclear medium are reviewed to indicate at which stage of our knowledge we stand, taking into account the most recent developments both in theory and experiments. A section is dedicated to the pairing problem. The connection with nuclear structure is then discussed, on the basis of the energy density functional method. The possibility of

  6. Physical Properties of Liquid Crystals

    CERN Document Server

    Gray, George W; Spiess, Hans W

    1999-01-01

    This handbook is a unique compendium of knowledge on all aspects of the physics of liquid crystals. In over 500 pages it provides detailed information on the physical properties of liquid crystals as well as the recent theories and results on phase transitions, defects and textures of different types of liquid crystals. An in-depth understanding of the physical fundamentals is a prerequisite for everyone working in the field of liquid crystal research. With this book the experts as well as graduate students entering the field get all the information they need.

  7. Statistical properties of earthquakes clustering

    Directory of Open Access Journals (Sweden)

    A. Vecchio

    2008-04-01

    Full Text Available Often in nature the temporal distribution of inhomogeneous stochastic point processes can be modeled as a realization of renewal Poisson processes with a variable rate. Here we investigate one of the classical examples, namely, the temporal distribution of earthquakes. We show that this process strongly departs from a Poisson statistics for both catalogue and sequence data sets. This indicate the presence of correlations in the system probably related to the stressing perturbation characterizing the seismicity in the area under analysis. As shown by this analysis, the catalogues, at variance with sequences, show common statistical properties.

  8. PROPERTIES OF THE $omega$ MESON

    Energy Technology Data Exchange (ETDEWEB)

    Shafer, J. B.; Murray, J. J.; Ferro-Luzzi, M.; Huwe, D. O.

    1963-06-15

    Properties of the omega meson were studied from the reaction K/sup -/ + p yields LAMBDA + omega in a 72-in. hydrogen bubble chamber. The momentum of the K/sup -/ mesons was 1.2 to 1.75 Bev/c. The mass of the omega meson is found to be 782 Mev with a width, predominated by three-meson( pi ) decay mode, estimated to be less than 4 Mev. Branching ratios for omega -meson decay into pi /sup +/ pi /sup -/ pi /sup o/, pi /sup o/ gamma , pi /sup +/ i/ sup -/, and e/sup +/e/sup -o/ were determined. (R.E.U.)

  9. Electronic properties of physisorbed helium

    International Nuclear Information System (INIS)

    Kossler, Sarah

    2011-01-01

    This thesis deals with electronic excitations of helium physisorbed on metal substrates. It is studied to what extent the electronic properties change compared to the gas phase due to the increased helium density and the proximity of the metal. Furthermore, the influence of different substrate materials is investigated systematically. To this end, up to two helium layers were adsorbed onto Ru (001), Pt (111), Cu (111), and Ag (111) surfaces in a custom-made cryostat. These samples were studied spectroscopically using synchrotron radiation and a time-of-flight detector. The experimental results were then analyzed in comparison with extensive theoretical model calculations.

  10. Acidogenic properties of Streptococcus mutans

    International Nuclear Information System (INIS)

    Stoesser, L.; Kneist, S.; Tumovec, M.; Katzmann, M.

    1988-01-01

    The growth kinetic parameters of S. mutans OMZ 176 culture as well as the 32 PO 4 uptake, as a measure of living cell mass, and the acid production rate by germ suspensions in a pH-stat technique were estimated. Subsequently, the acidogenicity of 20 S. mutans strains, other oral streptococci and dental plaque was measured and compared taking into consideration the growth kinetic dependence of studied activities. The strains OMZ 176 and OMZ 65 exhibited the most acidogenic properties whereas FA 1 produced 3.6 times less acid. (author)

  11. Electronic properties of physisorbed helium

    Energy Technology Data Exchange (ETDEWEB)

    Kossler, Sarah

    2011-09-22

    This thesis deals with electronic excitations of helium physisorbed on metal substrates. It is studied to what extent the electronic properties change compared to the gas phase due to the increased helium density and the proximity of the metal. Furthermore, the influence of different substrate materials is investigated systematically. To this end, up to two helium layers were adsorbed onto Ru (001), Pt (111), Cu (111), and Ag (111) surfaces in a custom-made cryostat. These samples were studied spectroscopically using synchrotron radiation and a time-of-flight detector. The experimental results were then analyzed in comparison with extensive theoretical model calculations.

  12. RELAP4 stagnation properties option

    International Nuclear Information System (INIS)

    DeYoung, T.L.

    1979-01-01

    The stagnation properties option in RELAP4/MOD6 was completely reviewed, from theoretical foundation to code application. The result of this investigation was the identification of a fundamental mismatch between the essentially homogeneous, equilibrium-based, RELAP4 code and the nonhomogeneous and/or nonequilibrium critical flow models imposed on the code. By continuously monitoring fluid Mach numbers and adjusting flow areas such that sonic velocity was never exceeded, the mismatch could be accommodated. This approach was implemented, found to work correctly, and will be incorporated into the MOD7 version of the code

  13. Biomechanical properties of bone allografts

    International Nuclear Information System (INIS)

    Pelker, R.R.; Friedlaender, G.E.; Markham, T.C.

    1983-01-01

    The biomechanical properties of allograft bone can be altered by the methods chosen for its preservation and storage. These effects are minimal with deep-freezing or low-level radiation. Freeze-drying, however, markedly diminishes the torsional and bending strength of bone allografts but does not deleteriously affect the compressive or tensile strength. Irradiation of bone with more than 3.0 megarad or irradiation combined with freeze-drying appears to cause a significant reduction in breaking strength. These factors should be considered when choosing freeze-dried or irradiated allogeneic bone that will be subjected to significant loads following implantation

  14. ACTOMP - AUTOCAD TO MASS PROPERTIES

    Science.gov (United States)

    Jones, A.

    1994-01-01

    AutoCAD to Mass Properties was developed to facilitate quick mass properties calculations of structures having many simple elements in a complex configuration such as trusses or metal sheet containers. Calculating the mass properties of structures of this type can be a tedious and repetitive process, but ACTOMP helps automate the calculations. The structure can be modelled in AutoCAD or a compatible CAD system in a matter of minutes using the 3-Dimensional elements. This model provides all the geometric data necessary to make a mass properties calculation of the structure. ACTOMP reads the geometric data of a drawing from the Drawing Interchange File (DXF) used in AutoCAD. The geometric entities recognized by ACTOMP include POINTs, 3DLINEs, and 3DFACEs. ACTOMP requests mass, linear density, or area density of the elements for each layer, sums all the elements and calculates the total mass, center of mass (CM) and the mass moments of inertia (MOI). AutoCAD utilizes layers to define separate drawing planes. ACTOMP uses layers to differentiate between multiple types of similar elements. For example if a structure is made of various types of beams, modeled as 3DLINEs, each with a different linear density, the beams can be grouped by linear density and each group placed on a separate layer. The program will request the linear density of 3DLINEs for each new layer it finds as it processes the drawing information. The same is true with POINTs and 3DFACEs. By using layers this way a very complex model can be created. POINTs are used for point masses such as bolts, small machine parts, or small electronic boxes. 3DLINEs are used for beams, bars, rods, cables, and other similarly slender elements. 3DFACEs are used for planar elements. 3DFACEs may be created as 3 or 4 Point faces. Some examples of elements that might be modelled using 3DFACEs are plates, sheet metal, fabric, boxes, large diameter hollow cylinders and evenly distributed masses. ACTOMP was written in Microsoft

  15. Transport Properties of Nanostructured Graphene

    DEFF Research Database (Denmark)

    Jauho, Antti-Pekka

    2017-01-01

    Despite of its many wonderful properties, pristine graphene has one major drawback: it does not have a band gap, which complicates its applications in electronic devices. Many routes have been suggested to overcome this difficulty, such as cutting graphene into nanoribbons, using chemical methods...... device operation. In this talk I elaborate these ideas and review the state-of-the-art both from the theoretical and the experimental points of view. I also introduce two new ideas: (1) triangular antidots, and (2) nanobubbles formed in graphene. Both of these nanostructuring methods are predicted...

  16. Electronic properties of rippled graphene

    International Nuclear Information System (INIS)

    Gui Gui; Ma Zhenqiang; Zhong Jianxin

    2012-01-01

    Short range periodic ripples in graphene have been modeled. The electronic properties of the rippled graphene have been investigated using first-principles calculations. Compared with flat graphene, there is a band gap opening in rippled graphene. Generally, the value of energy gaps increases as the height of ripples increase, but it decreases as the range of ripples enlarges. The maximum value of energy gaps in rippled graphene can reach several hundred meV, which turns rippled graphene into a good semiconductor. As a result, the magnitude of energy gaps can be tuned effectively by controlling the range and height of ripples in graphene.

  17. Quasicrystals Structure and Physical Properties

    CERN Document Server

    Trebin, Hans-Rainer

    2003-01-01

    A comprehensive and up-to-date review, covering the broad range of this outstanding class of materials among intermetallic alloys. Starting with metallurgy and characterization, the authors continue on to structure and mathematical modeling. They use this basis to move on to dealing with electronic, magnetic, thermal, dynamic and mechanical properties, before finally providing an insight into surfaces and thin films. The authors belong to a research program on quasicrystals, sponsored by the German Research Society and managed by Hans-Rainer Trebin, such that most of the latest results are pre

  18. Global properties of cellular automata

    International Nuclear Information System (INIS)

    Jen, E.

    1986-01-01

    Cellular automata are discrete mathematical systems that generate diverse, often complicated, behavior using simple deterministic rules. Analysis of the local structure of these rules makes possible a description of the global properties of the associated automata. A class of cellular automata that generate infinitely many aperoidic temporal sequences is defined,a s is the set of rules for which inverses exist. Necessary and sufficient conditions are derived characterizing the classes of ''nearest-neighbor'' rules for which arbitrary finite initial conditions (i) evolve to a homogeneous state; (ii) generate at least one constant temporal sequence

  19. Seismic characterization of fracture properties

    International Nuclear Information System (INIS)

    Myer, L.R.; Hopkins, D.; Cook, N.G.W.; Pyrak-Nolte, L.J.

    1990-01-01

    The purpose of this paper is to show that there is a relationship, both empirical and theoretical, between the measured seismic response, the mechanical stiffness (also referred to as specific stiffness) of fractures and their hydraulic conductivity. Laboratory measurements of the mechanical stiffness, hydraulic conductivity and seismic properties of natural fractures are summarized. A theoretical model for the amplitude and group time delay for compressional and shear waves transmitted across a single fracture is presented. Predictions based on this model are compared with laboratory measurements. Finally, the results for a single fracture are extended to multiple parallel fractures. 13 refs., 6 figs

  20. Thermophysical properties of Conasauga shale

    International Nuclear Information System (INIS)

    Smith, D.D.

    1978-01-01

    Thermophysical-property characterizations of five Conasauga shale cores were determined at temperatures between 298 and 673 K. Methods of specimen fabrication for different tests were evaluated. Thermal-conductivity and thermal-expansion data were found to be dependent on the structure and orientation of the individual specimens. Thermal conductivities ranged between 2.8 and 1.0 W/m-K with a small negative temperature dependence. Thermal expansions were between 2 and 5 x 10 -3 over the temperature range for the group. Heat capacity varied with the composition. 17 figures, 3 tables

  1. Magnetothermoelectric transport properties in phosphorene

    Science.gov (United States)

    Ma, R.; Liu, S. W.; Deng, M. X.; Sheng, L.; Xing, D. Y.; Sheng, D. N.

    2018-02-01

    We numerically study the electrical and thermoelectric transport properties in phosphorene in the presence of both a magnetic field and disorder. The quantized Hall conductivity is similar to that of a conventional two-dimensional electron gas, but the positions of all the Hall plateaus shift to the left due to the spectral asymmetry, in agreement with the experimental observations. The thermoelectric conductivity and Nernst signal exhibit remarkable anisotropy, and the thermopower is nearly isotropic. When a bias voltage is applied between top and bottom layers of phosphorene, both thermopower and Nernst signal are enhanced and their peak values become large.

  2. Magnetic materials. Properties and applications

    International Nuclear Information System (INIS)

    Bar'yakhtar, V.

    1998-01-01

    Main theoretical and experimental results of physics of magnetic materials have been stated. Special attention was paid to the problem of creation of magnetic materials for information recording and presentation. The results of fundamental researches have been considered for their effect on creation of magnetic materials with the properties required for production as well as the reverse effect of production financing on the development of fundamental investigations. The relations between the development of high technologies and the society requirements, financing volumes and the level of NIKOR. (author)

  3. Properties of dissimilar bilateral robots

    International Nuclear Information System (INIS)

    Cotsaftis, M.; Vibet, C.

    1987-01-01

    Developments in modern technology are pointing toward extension of personnel involvement in inaccessible environments; either hostile, such as space or deep-water offshore exploration, or dangerous, such as in chemical and nuclear plants. Telemanipulators then need to be used that should be designed to extend human dexterity safely. The general properties of similar or dissimilar telemanipulators and their related control laws are obtained by considering a master/slave robot as a three-terminal nonlinear element. A differential reciprocity concept - equivalent to the introduction of potential energy considerations - is used in connection with a telemanipulator's equilibrium equations

  4. 10 CFR 1022.21 - Property management.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Property management. 1022.21 Section 1022.21 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) COMPLIANCE WITH FLOODPLAIN AND WETLAND ENVIRONMENTAL REVIEW REQUIREMENTS Other Requirements § 1022.21 Property management. (a) If property in a floodplain or wetland is...

  5. Interdisciplinary approach to concept of the property

    International Nuclear Information System (INIS)

    Massunov, S.L.

    1996-01-01

    A new system of treatment of safety property is suggested. In general, property of ecological safety is determined as property of technical system (object) not to influence or allow no influence on length of life of living natural objects (people, flora, fauna) on account of health aggravation or increase of mortality

  6. 24 CFR 200.73 - Property development.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Property development. 200.73 Section 200.73 Housing and Urban Development Regulations Relating to Housing and Urban Development... Continuing Eligibility Requirements for Existing Projects Property Requirements § 200.73 Property development...

  7. Property Taxation. National Education Association Search.

    Science.gov (United States)

    National Education Association, Washington, DC. Research Div.

    The first of a series on school finance and the role of the state/local community, this document examines recent trends and developments in property taxation. The setting for property taxation and the state and local share of tax revenues for financing education are discussed. Two charts illustrate: (1) school district property tax collections…

  8. 21 CFR 1403.31 - Real property.

    Science.gov (United States)

    2010-04-01

    ... the cost of the original purchase to the fair market value of the property. However, in those... percentage of participation in the purchase of the real property to the current fair market value of the... COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards...

  9. 45 CFR 1174.31 - Real property.

    Science.gov (United States)

    2010-10-01

    ... the cost of the original purchase to the fair market value of the property. However, in those... percentage of participation in the purchase of the real property to the current fair market value of the... COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards...

  10. 45 CFR 1183.31 - Real property.

    Science.gov (United States)

    2010-10-01

    ... the cost of the original purchase to the fair market value of the property. However, in those... percentage of participation in the purchase of the real property to the current fair market value of the... COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards...

  11. 45 CFR 1157.31 - Real property.

    Science.gov (United States)

    2010-10-01

    ... the cost of the original purchase to the fair market value of the property. However, in those... percentage of participation in the purchase of the real property to the current fair market value of the... AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes, Property, and Subawards § 1157.31...

  12. 28 CFR 66.31 - Real property.

    Science.gov (United States)

    2010-07-01

    ... percentage of participation in the cost of the original purchase to the fair market value of the property... AND COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes, Property... subgrantee's percentage of participation in the purchase of the real property to the current fair market...

  13. 32 CFR 174.13 - Personal property.

    Science.gov (United States)

    2010-07-01

    ... the operation of a unit, function, component, weapon, or weapons system at another installation; (2... classified items; nuclear, biological, and chemical items; weapons and munitions; museum property or items of... personal property). This property includes materials or parts used in a manufacturing or repair function...

  14. Radiation modification of the properties of polypropylene

    Indian Academy of Sciences (India)

    ... were used to investigate some selected properties such as thermal properties, ... The properties of original and irradiated PP/15wt% CMC blend were investigated. ... 5, 10 and 20 kGy were subjected to biodegradation in soil burial tests for 6 ...

  15. 22 CFR 226.32 - Real property.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Real property. 226.32 Section 226.32 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Property Standards § 226.32 Real property. (a) Unless the agreement...

  16. Extension properties of states on operator algebras

    Science.gov (United States)

    Hamhalter, Jan

    1995-08-01

    We summarize and deepen some recent results concerning the extension problem for states on operator algebras and general quantum logics. In particular, we establish equivalence between the Gleason extension property, the Hahn-Banach extension property, and the universal state extension property of projection logics. Extensions of Jauch-Piron states are investigated.

  17. Cylinder Symmetric Measures with the Tail Property

    NARCIS (Netherlands)

    Balkema, A.A.

    2006-01-01

    Abstract: A Pareto distribution has the property that any tail of the distribution has the same shape as the original distribution. The exponential distribution and the uniform distribution have the tail property too. The tail property characterizes the univariate generalized Pareto distributions.

  18. A philosophical approach to intellectual property rights

    DEFF Research Database (Denmark)

    Petersen, Lars Axel

    2000-01-01

    This paper investigates the legitimacy of intellectual property by focusing on three topical issues, viz., the question of indigenous cultural rights, of computer software intellectual rights, and of intellectual property rights to essential drugs. A scheme of different arguments for the legitimacy...... of private property rights is applied to these issues, and each of the arguments assessed....

  19. Predicting soil properties in the tropics

    NARCIS (Netherlands)

    Minasny, B.; Hartemink, A.E.

    2011-01-01

    It is practically impossible to measure soil properties continuously at each location across the globe. Therefore, it is necessary to have robust systems that can predict soil properties at a given location. That is needed in many tropical countries where the dearth of soil property measurements is

  20. Cellulose nanomaterials review: structure, properties and nanocomposites

    Science.gov (United States)

    Robert J. Moon; Ashlie Martini; John Nairn; John Simonsen; Jeff Youngblood

    2011-01-01

    This critical review provides a processing-structure-property perspective on recent advances in cellulose nanoparticles and composites produced from them. It summarizes cellulose nanoparticles in terms of particle morphology, crystal structure, and properties. Also described are the self-assembly and rheological properties of cellulose nanoparticle suspensions. The...

  1. Transport properties of organic liquids

    CERN Document Server

    Latini, G; Passerini, G

    2006-01-01

    The liquid state is possibly the most difficult and intriguing state of matter to model. Organic liquids are required, mainly as working fluids, in almost all industrial activities and in most appliances (e.g. in air conditioning). Transport properties (namely dynamic viscosity and thermal conductivity) are possibly the most important properties for the design of devices and appliances. The aim of this book is to present both theoretical approaches and the latest experimental advances on the issue, and to merge them into a wider approach. It concentrates on applicability of models.This book is organized into five chapters plus a data collection. The chapters discuss the following topics: the liquid state and some well-know theories able to explain the behaviour of liquids; a rather complete review of models, based on theoretical assumptions and/or upon physical paradigms, to evaluate heat transfer in organic liquids; a review of several well-known semi-empirical methods to predict the thermal conductivity coe...

  2. The properties of undulator radiation

    International Nuclear Information System (INIS)

    Howells, M.R.; Kincaid, B.M.

    1993-09-01

    A new generation of synchrotron radiation light sources covering the VUV, soft x-ray, and hard x-ray spectral regions is under construction in several countries. These sources are designed specifically to use periodic magnetic undulators and low-emittance electron or positron beams to produce high-brightness near-diffraction-limited synchrotron radiation beams. Some of the novel features of the new sources are discussed, along with the characteristics of the radiation produced, with emphasis on the Advanced Light Source, a third-generation 1.5 GeV storage ring optimized for undulator use. A review of the properties of undulator radiation is presented, followed by a discussion of some of the unique challenges being faced by the builders and users of the new undulator sources. These include difficult mechanical and magnetic tolerance limits, a complex interaction with the storage ring, high x-ray beam power, partial coherence, harmonics, optics contamination, and the unusual spectral and angular properties of undulator radiation

  3. [Nanoparticles: properties and application prospects].

    Science.gov (United States)

    Chekman, I S

    2009-01-01

    A new trend of scientific-technical and medical researches has been formed which unites nanoscience, nanotechnology, nanomedicine, nanopharmacology. Nanoparticles are the main product of nanotechnologies. Nanoparticles are organic and inorganic structures, their size being less than one hundred nanometers (nano from Greece nanos--a dwarf; particle is a separate unit which is separated from the whole). Prefix nano means 10(-9) m. Nanosizes are values from 1 to 100 nanometers, micro-sizes--from 100 to 1000 nanometers, and above 1000 nanometers--are macrosizes. By the data of Internet for 1.08.20.2008 there are 18512 papers in the world scientific literature (8663 of them were published during the last 2.5 years), where properties of nanoparticles which are obtained by different nanotechnological methods are described. Actually, quantity of works concerning nanoparticles is much more because not all publications are cited in Internet. The first publication concerning a characteristic of nanoparticles was published in 1978. The survey generalized the data of scientific literature and author's investigations which concern sizes of nanoparticles of biologic molecules and their properties.

  4. Functional properties of irradiated starch

    International Nuclear Information System (INIS)

    Laouini, Wissal

    2011-01-01

    Irradiation is an effective method capable of modifying the functional properties of starches. Its effect depends on the specific structural and molecular organization of starch granules from different botanical sources. In this study, we have studied the effect of gamma irradiation (3, 5, 10, 20, 35, 50 kGy) on the rheological properties of some varieties of starch (potato, cassava and wheat). First, we were interested in determining dry matter content; the results showed that the variation in dry matter compared to the control (native starch) is almost zero. So it does not depend on the dose of irradiation. Contrariwise, it differs from a botanical species to another. The viscometer has shown that these starches develop different behaviors during shearing. The native potato starch gave the highest viscosity followed by wheat and cassava which have almost similar viscosities. For all varieties, the viscosity of starch decreases dramatically with an increasing dose of irradiation. At high doses (35 and 50 kGy) the behavior of different starch is similar to that of a viscous pure liquid. The textural analysis via the back-extrusion test showed that increasing the dose of radiation causes a decrease in extrusion force and the energy spent of the different starch throughout the test. Indeed, the extrusion resistance decreases with increasing dose.

  5. Performance properties of commercial explosives

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, J.N.; Mader, C.L.; Goldstein, S.

    1983-01-01

    The aquarium test is a proven means of obtaining nonidial performance property data for commercial blasting agents. Optical data on the detonation velocity, shock wave in water, and expansion rate of the pipe enclosing the detonation products (in combination with the equilibrium thermodynamic chemistry code BKW) give the C-J state and degree of chemical reaction at the detonation front, as well as information on additional chemical reaction that occurs as the detonation products expand. Specific explosive systems that are studied are ammonium nitrate-fuel oil mixture (ANFO), aluminized ANFO, flaked trinitrotoluene (TNT), and several other commercial products in 10-cm diam and 20-cm-diam pipes of Plexiglas and clay. Experimental shock-pressure data are obtained with lithium niobate transducers placed in the water surrounding the explosive charge. These data show that the addition of approx.100-..mu..m aluminum particles to ANFO significantly increases the initial peak shock pressure delivered to the surrounding medium. Peak shock pressures in the water, calculated from the shock-wave orientation, are also useful in comparing performance properties of various commercial explosives. 20 references, 17 figures, 2 tables.

  6. The Kadison-Singer property

    CERN Document Server

    Stevens, Marco

    2016-01-01

    This book gives a complete classification of all algebras with the Kadison-Singer property, when restricting to separable Hilbert spaces. The Kadison-Singer property deals with the following question: given a Hilbert space H and an abelian unital C*-subalgebra A of B(H), does every pure state on A extend uniquely to a pure state on B(H)? This question has deep connections to fundamental aspects of quantum physics, as is explained in the foreword by Klaas Landsman. The book starts with an accessible introduction to the concept of states and continues with a detailed proof of the classification of maximal Abelian von Neumann algebras, a very explicit construction of the Stone-Cech compactification and an account of the recent proof of the Kadison-Singer problem. At the end accessible appendices provide the necessary background material. This elementary account of the Kadison-Singer conjecture is very well-suited for graduate students interested in operator algebras and states, researchers who are non-specialist...

  7. Photometric properties of Triton hazes

    Science.gov (United States)

    Hillier, J.; Veverka, J.

    1994-01-01

    Voyager imaging observations of Triton have been used to investigate the characteristics of the atmospheric hazes on Triton at three wavelengths: violet (0.41 micrometers), blue (0.48 micrometers), and green (0.56 micrometers). The globally averaged optical depth is wavelength dependent, varying from 0.034 in green to 0.063 in violet. These photometric results are dominated by the properties of localized discrete clouds rather than by those of the thinner, more widespread haze known to occur on Triton. The cloud particles are bright, with single-scattering albedos near unity at all three wavelengths, suggestive of a transparent icy condensate. The asymmetry parameter (+0.6) and the wavelength dependence of the optical depth both indicate cloud particles 0.2-0.4 micrometers in radius. The clouds are concentrated at 50-60 deg S latitude, where opacities up to three times the global average are observed. This is the same latitude region where most of the evidence for current surface activity is found, suggesting that the clouds may be related to the plumes or at least to some process connected with the sublimation of the south polar cap. The effects of possible temporal variations in the haze opacity are examined. Increases in the haze opacity tend to redden Triton. However, the degree of reddening is not sufficient to explain the full range of observed changed in Triton over the past decade; variations in the surface properties appear to be necessary.

  8. Mechanical properties of fracture zones

    International Nuclear Information System (INIS)

    Leijon, B.

    1993-05-01

    Available data on mechanical characteristics of fracture zones are compiled and discussed. The aim is to improve the basis for adequate representation of fracture zones in geomechanical models. The sources of data researched are primarily borehole investigations and case studies in rock engineering, involving observations of fracture zones subjected to artificial load change. Boreholes only yield local information about the components of fracture zones, i.e. intact rock, fractures and various low-strength materials. Difficulties are therefore encountered in evaluating morphological and mechanical properties of fracture zones from borehole data. Although often thought of as macroscopically planar features, available field data consistently show that fracture zones are characterized by geometrical irregularities such as thickness variations, surface undulation and jogs. These irregularities prevail on all scales. As a result, fracture zones are on all scales characterized by large, in-plane variation of strength- and deformational properties. This has important mechanical consequences in terms of non-uniform stress transfer and complex mechanisms of shear deformation. Field evidence for these findings, in particular results from the underground research laboratory in Canada and from studies of induced fault slip in deep mines, is summarized and discussed. 79 refs

  9. Solution properties of hydrophobically modified

    Directory of Open Access Journals (Sweden)

    A.M. Al-Sabagh

    2016-12-01

    Full Text Available We tested nine hydrophobically modified polyacrylamides with molecular weights situated between 1.58 and 0.89 × 106 g/mol for enhanced oil recovery applications. Their solution properties were investigated in the distilled water, brine solution, formation water and sea water. Their critical association concentrations were determined from the relationship between their concentrations and the corresponding apparent viscosities (ηapp at 30 °C at shear rate 6 s−1. They were between 0.4 and 0.5 g/dl. The brine solutions of 0.5 g/dl of HM-PAMs were investigated at different conditions regarding their apparent viscosities. Such conditions were mono and divalent cations, temperature ranging from 30 to 90 °C, the shear rate ranging from 6 to 30 s−1 and the aging time for 45 days. The surface and interfacial tensions for the HM-PAMs were measured for concentration range from 0.01 to 1 g/dl brine solutions at 30 °C and their emulsification efficiencies were investigated for 7 days. The discrepancy in the properties and efficiencies of the tested copolymers was discussed in the light of their chemical structure.

  10. Thermal insulation properties of walls

    Directory of Open Access Journals (Sweden)

    Zhukov Aleksey Dmitrievich

    2014-05-01

    Full Text Available Heat-protective qualities of building structures are determined by the qualities of the used materials, adequate design solutions and construction and installation work of high quality. This rule refers both to the structures made of materials similar in their structure and nature and mixed, combined by a construction system. The necessity to ecaluate thermal conductivity is important for a product and for a construction. Methods for evaluating the thermal protection of walls are based on the methods of calculation, on full-scale tests in a laboratory or on objects. At the same time there is a reason to believe that even deep and detailed calculation may cause deviation of the values from real data. Using finite difference method can improve accuracy of the results, but it doesn’t solve all problems. The article discusses new approaches to evaluating thermal insulation properties of walls. The authors propose technique of accurate measurement of thermal insulation properties in single blocks and fragments of walls and structures.

  11. Thermal properties of cesium molybdate

    International Nuclear Information System (INIS)

    Minato, Kazuo; Fukuda, Kousaku; Takano, Masahide; Sato, Seichi; Ohashi, Hiroshi

    1996-01-01

    Cesium is one of the most important fission products to aid in the understanding and prediction of the behavior of oxide nuclear fuels because of its high mobility, chemical reactivity, and large yield. In postirradiation examinations of the Phoenix reactor fuel pins, the accumulation of cesium and molybdenum between the fuel pellet and cladding was observed, though the chemical form was not determined. In the thermodynamic analyses of chemical states of fission products, Cs 2 MoO 4 was often predicted to exist as a stable compound in oxide fuels. The Cs 2 MoO 4 compound is thermodynamically stable under the conditions of light water reactors, fast breeder reactors, and high-temperature gas-cooled reactors. In the Cs-Mo-O system several phases have been found, and the structural and thermodynamic properties were studied. At room temperature, Cs 2 MoO 4 has an orthorhombic structure and a phase transition occurs at 841 K to a hexagonal structure. Both structures are expected to exist in the fuel, depending on the fuel temperature. However, no data has been available on the thermal properties of CS 2 MoO 4 . In the current work, the thermal expansion and thermal conductivity of Cs 2 MoO 4 were determined, which are the basic data needed to understand and predict the fuel/clad mechanical interaction and fuel temperature

  12. Hydraulic properties of fracture networks

    International Nuclear Information System (INIS)

    Dreuzy, J.R. de

    1999-12-01

    Fractured medium are studied in the general framework of oil and water supply and more recently for the underground storage of high level nuclear wastes. As fractures are generally far more permeable than the embedding medium, flow is highly channeled in a complex network of fractures. The complexity of the network comes from the broad distributions of fracture length and permeability at the fracture scale and appears through the increase of the equivalent permeability at the network scale. The goal of this thesis is to develop models of fracture networks consistent with both local-scale and global-scale observations. Bidimensional models of fracture networks display a wide variety of flow structures ranging from the sole permeable fracture to the equivalent homogeneous medium. The type of the relevant structure depends not only on the density and the length and aperture distributions but also on the observation scale. In several models, a crossover scale separates complex structures highly channeled from more distributed and homogeneous-like flow patterns at larger scales. These models, built on local characteristics and validated by global properties, have been settled in steady state. They have also been compared to natural well test data obtained in Ploemeur (Morbihan) in transient state. The good agreement between models and data reinforces the relevance of the models. Once validated and calibrated, the models are used to estimate the global tendencies of the main flow properties and the risk associated with the relative lack of data on natural fractures media. (author)

  13. Calculation of thermophysical properties of sodium

    International Nuclear Information System (INIS)

    Fink, J.K.; Leibowitz, L.

    1981-01-01

    The thermodynamic properties of sodium previously recommended by Padilla have been updated. As much as possible, the approach described by Padilla has been used. For sodium in the states of saturated liquid and vapor, subcooled liquid and superheated vapor, the following thermodynamic properties were determined: enthalpy, heat capacity (constant pressure and constant volume), pressure, density, thermal-expansion coefficient, and compressibility (adiabatic and isothermal). In addition to the above properties, thermodynamic properties including heat of fusion, heat of vaporization, surface tension, speed of sound and transport properties of themal conductivity, thermal diffusivity, emissivity, and viscosity were determined for saturated sodium

  14. History of an Issue – Property

    Directory of Open Access Journals (Sweden)

    Niadi-Corina CERNICA,

    2012-12-01

    Full Text Available Property becomes a issue of philosophy and political reflections owing to Platon`s “Republic”. In this dialogue, the military class of his political Utopia is obliged not to possess goods. So that the Republic is more important than their interests. For this reason the military class is obliged not to have family. The interest of Republic is more important than the individual interests. David Hume thinks the right comes from the property (the two concepts have developed correspondingly. Property is a result of human natural needs. The needs are complied with the property. Human nature implies the property. John Locke affirms property comes from work, so it is a moral right. J.J. Rousseau thinks the property is the origin of social and political inequality, in contrast with natural equality of human beings. Karl Marx affirms property is the origin of alienation. Property is the origin of estrangement of human beings from themselves. “Marxist humanism” implies to regain the dignity of work and the social dignity. Other philosophers think the property is a warrant of freedom. Property was tied to social interests (Platon, to morality (Thomas Morus, John Locke, to human nature (J. J. Rousseau, David Hume, Karl Marx and freedom.

  15. Rents in property rights creation and implementation

    Directory of Open Access Journals (Sweden)

    Žarković Jelena

    2006-01-01

    Full Text Available The institution of property rights is increasingly being recognized as an essential building block of an economically prosperous society. The question that remains unanswered however, is how do we develop effective property rights institutions? The literature dealing with the development of property rights tends to be, in general, overly optimistic since there is a tendency to view the design of property rights institutions as optimizing decisions to economize on transaction costs and to facilitate new economic activities. On the other hand, since property rights define the distribution of wealth and political power in a society changes in property rights structures are likely to be influenced by more than pure efficiency considerations. Therefore, in order to achieve a balanced analysis of the evolution of property rights institutions our article introduces the state in the whole process. Following the propositions of the interest group theory of government we show an important relationship between rent seeking and state involvement in property rights creation. The state with a coercive power to establish and enforce property rights can also use that power, through the process of economic regulation, to redistribute property rights to politically influential interest groups. Herein lies the state failure in property rights creation.

  16. 7 CFR 767.52 - Disposition of personal property from real estate inventory property.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Disposition of personal property from real estate..., personal property has been left on the real estate inventory property, the Agency will notify the former real estate owner and any known lienholders that the Agency will dispose of the personal property...

  17. The thermophysical properties of serpentinite

    Directory of Open Access Journals (Sweden)

    Hršak, D.

    2008-01-01

    Full Text Available In this article serpentinite from Banovina, Croatia, was studied. The antigorite is main mineral constituent of that rock. The dilatation curve shows that the first contraction of sample is coursed by dehydratation of antigorite at nearly 660°C. In spite of this, the second contraction of sample, which begines at nearly 860°C, is incident with olivine phase formation. The morphology of the serpentinite before and after thermal treatment was observed with the optical microscope. Image of serpentinite before thermal treatment is characterized by inclusions of olivine as primary mineral left as residue in process of serpentinization. Image of serpentinite after thermal treatment was changed by water disappear. The first thermal treated and than milled serpentinite has better properties than the first milled and than thermally treated serpentinite.

  18. Mechanical properties of irradiated beryllium

    International Nuclear Information System (INIS)

    Beeston, J.M.; Longhurst, G.R.; Wallace, R.S.

    1992-01-01

    Beryllium is planned for use as a neutron multiplier in the tritium breeding blanket of the International Thermonuclear Experimental Reactor (ITER). After fabricating samples of beryllium at densities varying from 80 to 100% of the theoretical density, we conducted a series of experiments to measure the effect of neutron irradiation on mechanical properties, especially strength and ductility. Samples were irradiated in the Advanced Test Reactor (ATR) to a neutron fluence of 2.6 x 10 25 n/m 2 (E > MeV) at an irradiation temperature of 75deg C. These samples were subsequently compression-tested at room temperature, and the results were compared with similar tests on unirradiated specimens. We found that the irradiation increased the strength by approximately four times and reduced the ductility to approximately one fourth. Failure was generally ductile, but the 80% dense irradiated samples failed in brittle fracture with significant generation of fine particles and release of small quantities of tritium. (orig.)

  19. Mechanical properties of irradiated beryllium

    Science.gov (United States)

    Beeston, J. M.; Longhurst, G. R.; Wallace, R. S.; Abeln, S. P.

    1992-10-01

    Beryllium is planned for use as a neutron multiplier in the tritium breeding blanket of the International Thermonuclear Experimental Reactor (ITER). After fabricating samples of beryllium at densities varying from 80 to 100% of the theoretical density, we conducted a series of experiments to measure the effect of neutron irradiation on mechanical properties, especially strength and ductility. Samples were irradiated in the Advanced Test Reactor (ATR) to a neutron fluence of 2.6 × 10 25 n/m 2 ( E > 1 MeV) at an irradiation temperature of 75°C. These samples were subsequently compression-tested at room temperature, and the results were compared with similar tests on unirradiated specimens. We found that the irradiation increased the strength by approximately four times and reduced the ductility to approximately one fourth. Failure was generally ductile, but the 80% dense irradiated samples failed in brittle fracture with significant generation of fine particles and release of small quantities of tritium.

  20. Optical properties of graphene superlattices.

    Science.gov (United States)

    Le, H Anh; Ho, S Ta; Nguyen, D Chien; Do, V Nam

    2014-10-08

    In this work, the optical responses of graphene superlattices, i.e. graphene subjected to a periodic scalar potential, are theoretically reported. The optical properties were studied by investigating the optical conductivity, which was calculated using the Kubo formalism. It was found that the optical conductivity becomes dependent on the photon polarization and is suppressed in the photon energy range of (0, Ub), where Ub is the potential barrier height. In the higher photon energy range, i.e. Ω > Ub, the optical conductivity is, however, almost identical to that of pristine graphene. Such behaviors of the optical conductivity are explained microscopically through the analysis of the elements of optical matrices and effectively through a simple model, which is based on the Pauli blocking mechanism.

  1. Optical properties of graphene superlattices

    International Nuclear Information System (INIS)

    Le, H Anh; Do, V Nam; Ho, S Ta; Nguyen, D Chien

    2014-01-01

    In this work, the optical responses of graphene superlattices, i.e. graphene subjected to a periodic scalar potential, are theoretically reported. The optical properties were studied by investigating the optical conductivity, which was calculated using the Kubo formalism. It was found that the optical conductivity becomes dependent on the photon polarization and is suppressed in the photon energy range of (0, U b ), where U b is the potential barrier height. In the higher photon energy range, i.e. Ω > U b , the optical conductivity is, however, almost identical to that of pristine graphene. Such behaviors of the optical conductivity are explained microscopically through the analysis of the elements of optical matrices and effectively through a simple model, which is based on the Pauli blocking mechanism. (paper)

  2. Transport properties of molecular junctions

    CERN Document Server

    Zimbovskaya, Natalya A

    2013-01-01

    A comprehensive overview of the physical mechanisms that control electron transport and the characteristics of metal-molecule-metal (MMM) junctions is presented. As far as possible, methods and formalisms presented elsewhere to analyze electron transport through molecules are avoided. This title introduces basic concepts—a description of the electron transport through molecular junctions—and briefly describes relevant experimental methods. Theoretical methods commonly used to analyze the electron transport through molecules are presented. Various effects that manifest in the electron transport through MMMs, as well as the basics of density-functional theory and its applications to electronic structure calculations in molecules are presented. Nanoelectronic applications of molecular junctions and similar systems are discussed as well. Molecular electronics is a diverse and rapidly growing field. Transport Properties of Molecular Junctions presents an up-to-date survey of the field suitable for researchers ...

  3. Sticking properties of ice grains

    Directory of Open Access Journals (Sweden)

    Jongmanns M.

    2017-01-01

    Full Text Available We study the size dependence of pull-off forces of water ice in laboratory experiments and numerical simulations. To determine the pull-off force in our laboratory experiments, we use a liquid nitrogen cooled centrifuge. Depending on its rotation frequency, spherical ice grains detach due to the centrifugal force which is related to the adhesive properties. Numerical simulations are conducted by means of molecular dynamics simulations of hexagonal ice using a standard coarse-grained water potential. The pull-off force of a single contact between two spherical ice grains is measured due to strain controlled simulations. Both, the experimental study and the simulations reveal a dependence between the pull-off force and the (reduced particle radii, which differ significantly from the linear dependence of common contact theories.

  4. Properties of the tau lepton

    International Nuclear Information System (INIS)

    Feldman, G.J.

    1978-06-01

    The measured properties of the tau lepton and its neutrino are reviewed. A constrained fit to the world data gives a tau branching fraction to an electron plus neutrinos (B/sub e/) of (17.4 +- 2.1)% and B/sub mu//B/sub e/ = 1.07 +- 0.17. New data on the tau → pi nu mode are in agreement with the expected branching fraction. There is evidence for the tau → A 1 nu mode, but the A 1 resonance cannot be conclusively established from the current data. The DELCO experiment establishes the tau mass to be 1782 /sup +2//sub - 7/ MeV/c 2 and the nu/sub tau/ mass to be less than 250 MeV/c 2 . It also excludes V + A as a tau - nu/sub tau/ coupling and strongly favors V - A

  5. Cutinases: properties and industrial applications.

    Science.gov (United States)

    Pio, Tatiana Fontes; Macedo, Gabriela Alves

    2009-01-01

    Cutinases, also known as cutin hydrolases (EC 3.1.1.74) are enzymes first discovered from phytopathogenic fungi that grow on cutin as the sole carbon source. Cutin is a complex biopolymer composed of epoxy and hydroxy fatty acids, and forms the structural component of higher plants cuticle. These enzymes share catalytic properties of lipases and esterases, presenting a unique feature of being active regardless the presence of an oil-water interface, making them interesting as biocatalysts in several industrial processes involving hydrolysis, esterification, and trans-esterification reactions. Cutinases present high stability in organic solvents and ionic liquids, both free and microencapsulated in reverse micelles. These characteristics allow the enzyme application in different areas such as food industry, cosmetics, fine chemicals, pesticide and insecticide degradation, treatment and laundry of fiber textiles, and polymer chemistry. The present chapter describes the characteristics, potential applications, and new perspectives for these enzymes.

  6. Structural properties of matrix metalloproteinases.

    Science.gov (United States)

    Bode, W; Fernandez-Catalan, C; Tschesche, H; Grams, F; Nagase, H; Maskos, K

    1999-04-01

    Matrix metalloproteinases (MMPs) are involved in extracellular matrix degradation. Their proteolytic activity must be precisely regulated by their endogenous protein inhibitors, the tissue inhibitors of metalloproteinases (TIMPs). Disruption of this balance results in serious diseases such as arthritis, tumour growth and metastasis. Knowledge of the tertiary structures of the proteins involved is crucial for understanding their functional properties and interference with associated dysfunctions. Within the last few years, several three-dimensional MMP and MMP-TIMP structures became available, showing the domain organization, polypeptide fold and main specificity determinants. Complexes of the catalytic MMP domains with various synthetic inhibitors enabled the structure-based design and improvement of high-affinity ligands, which might be elaborated into drugs. A multitude of reviews surveying work done on all aspects of MMPs have appeared in recent years, but none of them has focused on the three-dimensional structures. This review was written to close the gap.

  7. Top quark properties at ATLAS

    CERN Document Server

    Dilip, Jana

    2008-01-01

    The ATLAS potential for the study of the top quark properties and physics beyond the Standard Model in the top quark sector, is described. The measurements of the top quark charge, the spin and spin correlations, the Standard Model decay (t-> bW), rare top quark decays associated to flavour changing neutral currents (t-> qX with X = gluon, Z, photon) and ttbar resonances are discussed. The sensitivity of the ATLAS experiment is estimated for an expected luminosity of 1fb-1 at the LHC. The full simulation of the ATLAS detector is used. For the Standard Model measurements the expected precision is presented. For the tests of physics beyond the Standard Model, the 5 sigma discovery potential (in the presence of a signal) and the 95% Confidence Level (CL) limit (in the absence of a signal) are given.

  8. Clan properties in parton showers

    International Nuclear Information System (INIS)

    Ugoccioni, R.; Giovannini, A.; Lupia, S.

    1994-01-01

    By considering clans as genuine elementary sub-processes, i.e., intermediate parton sources in the Simplified Parton Shower model, a generalized version of this model is defined. It predicts analytically clan properties at parton level in agreement with the general trends observed experimentally at hadronic level and in Monte Carlo simulations both at partonic and hadronic level. In particular the model shows a linear rising in rapidity of the average number of clans at fixed energy of the initial parton and its subsequent bending for rapidity intervals at the border of phase space, and approximate energy independence of the average number of clans in fixed rapidity intervals. The energy independence becomes stricter by properly normalizing the average number of clans (orig.)

  9. Clan properties in parton showers

    Energy Technology Data Exchange (ETDEWEB)

    Ugoccioni, R. (Dipt. di Fisica Teorica, Univ. di Torino (Italy) INFN (Italy)); Giovannini, A. (Dipt. di Fisica Teorica, Univ. di Torino (Italy) INFN (Italy)); Lupia, S. (Dipt. di Fisica Teorica, Univ. di Torino (Italy) INFN (Italy))

    1994-11-01

    By considering clans as genuine elementary sub-processes, i.e., intermediate parton sources in the Simplified Parton Shower model, a generalized version of this model is defined. It predicts analytically clan properties at parton level in agreement with the general trends observed experimentally at hadronic level and in Monte Carlo simulations both at partonic and hadronic level. In particular the model shows a linear rising in rapidity of the average number of clans at fixed energy of the initial parton and its subsequent bending for rapidity intervals at the border of phase space, and approximate energy independence of the average number of clans in fixed rapidity intervals. The energy independence becomes stricter by properly normalizing the average number of clans (orig.)

  10. Property Testing on Linked Lists

    DEFF Research Database (Denmark)

    Afshani, Peyman; Matulef, Kevin; Wilkinson, Bryan Thomas

    2013-01-01

    We define a new property testing model for algorithms that do not have arbitrary query access to the input, but must instead traverse it in a manner that respects the underlying data structure in which it is stored. In particular, we consider the case when the underlying data structure is a linked...... list, and the testing algorithm is allowed to either sample randomly from the list, or walk to nodes that are adjacent to those already visited. We study the well-known monotonicity testing problem in this model, and show that (n13) queries are both necessary and sufficient to distinguish whether...... a list is sorted (monotone increasing) versus a constant distance from sorted. Our bound is strictly greater than the (logn) queries required in the standard testing model, that allows element access indexed by rank, and strictly less than the (n12) queries required by a weak model that only allows...

  11. Sticking properties of ice grains

    Science.gov (United States)

    Jongmanns, M.; Kumm, M.; Wurm, G.; Wolf, D. E.; Teiser, J.

    2017-06-01

    We study the size dependence of pull-off forces of water ice in laboratory experiments and numerical simulations. To determine the pull-off force in our laboratory experiments, we use a liquid nitrogen cooled centrifuge. Depending on its rotation frequency, spherical ice grains detach due to the centrifugal force which is related to the adhesive properties. Numerical simulations are conducted by means of molecular dynamics simulations of hexagonal ice using a standard coarse-grained water potential. The pull-off force of a single contact between two spherical ice grains is measured due to strain controlled simulations. Both, the experimental study and the simulations reveal a dependence between the pull-off force and the (reduced) particle radii, which differ significantly from the linear dependence of common contact theories.

  12. Immunomodulatory properties of probiotic bacteria

    DEFF Research Database (Denmark)

    Fink, Lisbeth Nielsen

    2007-01-01

    Certain lactic acid bacteria (LAB) are part of the commensal intestinal flora and considered beneficial for health, as they compete with pathogens for adhesion sites in the intestine and ferment otherwise indigestible compounds. Another important property of these so-called probiotic bacteria...... with bacteria, and the cytokine pattern induced by specific bacteria resembled the pattern induced in MoDC, except for TNF-alpha and IL-6, which were induced in response to different bacteria in blood DC/monocytes and monocyte-derived DC. Autologous NK cells produced IFN-gamma when cultured with blood DC......, monocytes and monocyte-derived DC and IL-12-inducing bacteria, whereas only DC induced IFN-gamma production in allogeneic T cells. In vitro-generated DC is a commonly used model of tissue DC, but they differ in certain aspects from intestinal DC, which are in direct contact with the intestinal microbiota...

  13. Fragmentation properties of 6Li

    International Nuclear Information System (INIS)

    Lovas, R.G.; Kruppa, A.T.; Beck, R.; Dickmann, F.

    1987-01-01

    The α+d and t+τ cluster structure of 6 Li is described in a microscopic α+d cluster model through quantities that enter into the description of cluster fragmentation processes. The states of the separate clusters α, d, t and τ are described as superpositions of Os Slater determinants belonging to different potential size parameters. To describe both the 6 Li and fragment state realistically, nucleon-nucleon forces optimized for the used model state spaces were constructed. The fragmentation properties predicted by them slightly differ from those calculated with some forces of common use provided the latter are modified so as to reproduce the α, d and 6 Li energies. (author) 61 refs.; 9 figs

  14. Radiative properties of ice clouds

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, D.L.; Koracin, D.; Carter, E. [Desert Research Institute, Reno, NV (United States)

    1996-04-01

    A new treatment of cirrus cloud radiative properties has been developed, based on anomalous diffraction theory (ADT), which does not parameterize size distributions in terms of an effective radius. Rather, is uses the size distribution parameters directly, and explicitly considers the ice particle shapes. There are three fundamental features which characterize this treatment: (1) the ice path radiation experiences as it travels through an ice crystal is parameterized, (2) only determines the amount of radiation scattered and absorbed, and (3) as in other treatments, the projected area of the size distribution is conserved. The first two features are unique to this treatment, since it does not convert the ice particles into equivalent volume or area spheres in order to apply Mie theory.

  15. Observed properties of extrasolar planets.

    Science.gov (United States)

    Howard, Andrew W

    2013-05-03

    Observational surveys for extrasolar planets probe the diverse outcomes of planet formation and evolution. These surveys measure the frequency of planets with different masses, sizes, orbital characteristics, and host star properties. Small planets between the sizes of Earth and Neptune substantially outnumber Jupiter-sized planets. The survey measurements support the core accretion model, in which planets form by the accumulation of solids and then gas in protoplanetary disks. The diversity of exoplanetary characteristics demonstrates that most of the gross features of the solar system are one outcome in a continuum of possibilities. The most common class of planetary system detectable today consists of one or more planets approximately one to three times Earth's size orbiting within a fraction of the Earth-Sun distance.

  16. Thermodynamical properties of dark energy

    International Nuclear Information System (INIS)

    Gong Yungui; Wang Bin; Wang Anzhong

    2007-01-01

    We have investigated the thermodynamical properties of dark energy. Assuming that the dark energy temperature T∼a -n and considering that the volume of the Universe enveloped by the apparent horizon relates to the temperature, we have derived the dark energy entropy. For dark energy with constant equation of state w>-1 and the generalized Chaplygin gas, the derived entropy can be positive and satisfy the entropy bound. The total entropy, including those of dark energy, the thermal radiation, and the apparent horizon, satisfies the generalized second law of thermodynamics. However, for the phantom with constant equation of state, the positivity of entropy, the entropy bound, and the generalized second law cannot be satisfied simultaneously

  17. Involuntary transfer of Intellectual property

    Directory of Open Access Journals (Sweden)

    Saeed habiba

    2011-07-01

    Full Text Available IPR owners have a right about voluntary transfer but sometimes Intellectual property right transfer by force and thus, there are challenge that this article regard for its. IPR shall be devolved to their legitimate heirs after their death unless, owner indicate otherwise in their wills. The heirs have the exclusive right to exercise economic and moral rights, they decide upon publication of the work and in general do every exploitation. But, they shall exercise The decisive manner that IPR of holder intended before his death. On other hand, IPR may be liable to seizure or IPR have been used in mortgage loan. Thus they can be transfer to new person.Here, we regard to Involuntary transfer.This article highlight subject of involuntary transfer and analysis on aspects

  18. Algebraic properties of generalized inverses

    CERN Document Server

    Cvetković‐Ilić, Dragana S

    2017-01-01

    This book addresses selected topics in the theory of generalized inverses. Following a discussion of the “reverse order law” problem and certain problems involving completions of operator matrices, it subsequently presents a specific approach to solving the problem of the reverse order law for {1} -generalized inverses. Particular emphasis is placed on the existence of Drazin invertible completions of an upper triangular operator matrix; on the invertibility and different types of generalized invertibility of a linear combination of operators on Hilbert spaces and Banach algebra elements; on the problem of finding representations of the Drazin inverse of a 2x2 block matrix; and on selected additive results and algebraic properties for the Drazin inverse. In addition to the clarity of its content, the book discusses the relevant open problems for each topic discussed. Comments on the latest references on generalized inverses are also included. Accordingly, the book will be useful for graduate students, Ph...

  19. Grain boundary structure and properties

    International Nuclear Information System (INIS)

    Balluffi, R.W.

    1979-01-01

    An attempt is made to distinguish those fundamental aspects of grain boundaries which should be relevant to the problem of the time dependent fracture of high temperature structural materials. These include the basic phenomena which are thought to be associated with cavitation and cracking at grain boundaries during service and with the more general microstructural changes which occur during both processing and service. A very brief discussion of the current state of our knowledge of these fundamentals is given. Included are the following: (1) structure of ideal perfect boundaries; (2) defect structure of grain boundaries; (3) diffusion at grain boundaries; (4) grain boundaries as sources/sinks for point defects; (5) grain boundary migration; (6) dislocation phenomena at grain boundaries; (7) atomic bonding and cohesion at grain boundaries; (8) non-equilibrium properties of grain boundaries; and (9) techniques for studying grain boundaries

  20. Dynamical properties of lanthanum monochalcogenides

    International Nuclear Information System (INIS)

    Varshney, Dinesh; Rathore, V.; Kaurav, N.; Choudhary, K.K.; Singh, R.K.

    2006-01-01

    We have employed an effective interionic interaction potential approach to describe the dynamical properties of LaS. This potential consists of the long-range Coulomb and three-body interactions (TBI) and the short-range van der Waals (vdW) interaction and the Hafemeister and Flygare type overlap repulsion extended up to the second neighbor ions. The elastic constants obtained from the model have been used to calculate the phonon dispersion relation in the symmetry direction. The phonon dispersion curves of LaS compound. calculated from the present model, agree with the measured data. We also report the two-phonon density of states of LaS. (author)

  1. Mechanical properties of Stripa granite

    International Nuclear Information System (INIS)

    Stephansson, O.; Swan, G.; Leijon, B.

    1978-01-01

    For the determination of the mechanical properties of Stripa Granite samples were taken from the boreholes in the vicinity of the test site. The granite type taken from these different sources is of variable character. For the purpose of numerical calculations performed in projects related to the waste storage research program the following parameters have been determined: Young's modulus, Poisson's ratio, compressive fracture stress and expansion coefficient as a function of temperature 20< T<200C; Young's modulus and compressive fracture stress as a function of confining pressure; Brazilian tensile fracture stress; residual shear stress as a function of normal stress; anisotropy ratio for Young's modulus and compressive fracture stress; dilatational wave velocity and deduced dynamic Young's modulus. A brief description of the test methods and the results for each test are presented

  2. Superconducting state mechanisms and properties

    CERN Document Server

    Kresin, Vladimir Z; Wolf, Stuart A

    2014-01-01

    'Superconducting State' provides a very detailed theoretical treatment of the key mechanisms of superconductivity, including the current state of the art (phonons, magnons, and plasmons). A very complete description is given of the electron-phonon mechanism responsible for superconductivity in the majority of superconducting systems, and the history of its development, as well as a detailed description of the key experimental techniques used to study the superconducting state and determine the mechanisms. In addition, there are chapters describing the discovery and properties of the key superconducting compounds that are of the most interest for science, and applications including a special chapter on the cuprate superconductors. It provides detailed treatments of some very novel aspects of superconductivity, including multiple bands (gaps), the "pseudogap" state, novel isotope effects beyond BCS, and induced superconductivity.

  3. Properties of porous netted materials

    International Nuclear Information System (INIS)

    Daragan, V.D.; Drozdov, B.G.; Kotov, A.Yu.; Mel'nikov, G.N.; Pustogarov, A.V.

    1987-01-01

    Hydraulic and strength characteristics, efficient heat conduction and inner heat exchange coefficient are experimentally studied for porous netted materials on the base of the brass nets as dependent on porosity, cell size and method of net laying. Results of the studies are presented. It is shown that due to anisotropy of the material properties the hydraulic resistance in the direction parallel to the nets plane is 1.3-1.6 times higher than in the perpendicular one. Values of the effective heat conduction in the direction perpendicular to the nets plane at Π>0.45 agree with the data from literature, at Π<0.45 a deviation from the calculated values is marked in the direction of the heat conduction decrease

  4. Bernstein operators and their properties

    CERN Document Server

    Bustamante, Jorge

    2017-01-01

    This book provides comprehensive information on the main aspects of Bernstein operators, based on the literature to date. Bernstein operators have a long-standing history and many papers have been written on them. Among all types of positive linear operators, they occupy a unique position because of their elegance and notable approximation properties. This book presents carefully selected material from the vast body of literature on this topic. In addition, it highlights new material, including several results (with proofs) appearing in a book for the first time. To facilitate comprehension, exercises are included at the end of each chapter. The book is largely self-contained and the methods in the proofs are kept as straightforward as possible. Further, it requires only a basic grasp of analysis, making it a valuable and appealing resource for advanced graduate students and researchers alike.

  5. Structure and properties of metals

    CERN Document Server

    Kurzydlowski, K J

    1999-01-01

    Metals are one of the most widely used types of engineering materials. Some of their properties, e.g. elastic constants, can be directly related to the nature of the metallic bonds between the atoms. On the other hand, macro- and $9 microstructural features of metals, such as point defects, dislocations, grain boundaries, and second phase particles, control their yield, flow, and fracture stress. Images of microstructural elements can be obtained by modern $9 imaging techniques. Modern computer aided methods can be further used to obtain a quantitative description of these microstructures. These methods take advantage of the progress made in recent years in the field of image processing, $9 mathematical morphology and quantitative stereology. Quantitative description of the microstructures are used for modeling processes taking place under the action of applied load at a given temperature and test (service) environment. $9 These model considerations can be illustrated on the example of an austenitic stainless...

  6. Antioxidant Properties of Probiotic Bacteria.

    Science.gov (United States)

    Wang, Yang; Wu, Yanping; Wang, Yuanyuan; Xu, Han; Mei, Xiaoqiang; Yu, Dongyou; Wang, Yibing; Li, Weifen

    2017-05-19

    Oxidative stress defines a condition in which the prooxidant-antioxidant balance in the cell is disturbed, resulting in DNA hydroxylation, protein denaturation, lipid peroxidation, and apoptosis, ultimately compromising cells' viability. Probiotics have been known for many beneficial health effects, and the consumption of probiotics alone or in food shows that strain-specific probiotics can present antioxidant activity and reduce damages caused by oxidation. However, the oxidation-resistant ability of probiotics, especially the underling mechanisms, is not properly understood. In this view, there is interest to figure out the antioxidant property of probiotics and summarize the mode of action of probiotic bacteria in antioxidation. Therefore, in the present paper, the antioxidant mechanisms of probiotics have been reviewed in terms of their ability to improve the antioxidant system and their ability to decrease radical generation. Since in recent years, oxidative stress has been associated with an altered gut microbiota, the effects of probiotics on intestinal flora composition are also elaborated.

  7. Magnetic properties of hematite nanoparticles

    DEFF Research Database (Denmark)

    Bødker, Franz; Hansen, Mikkel Fougt; Bender Koch, Christian

    2000-01-01

    The magnetic properties of hematite (alpha-Fe2O3) particles with sizes of about 16 nm have been studied by use of Mossbauer spectroscopy, magnetization measurements, and neutron diffraction. The nanoparticles are weakly ferromagnetic at temperatures at least down to 5 K with a spontaneous...... magnetization that is only slightly higher than that of weakly ferromagnetic bulk hematite. At T greater than or similar to 100 K the Mossbauer spectra contain a doublet, which is asymmetric due to magnetic relaxation in the presence of an electric field gradient in accordance with the Blume-Tjon model......, Simultaneous fitting of series of Mossbauer spectra obtained at temperatures from 5 K to well above the superparamagnetic blocking temperature allowed the estimation of the pre-exponential factor in Neel's expression for the superparamagnetic relaxation time, tau(0) = (6 +/- 4) X 10(-11) s and the magnetic...

  8. Spectral properties of nuclear matter

    International Nuclear Information System (INIS)

    Bozek, P

    2006-01-01

    We review self-consistent spectral methods for nuclear matter calculations. The in-medium T-matrix approach is conserving and thermodynamically consistent. It gives both the global and the single-particle properties the system. The T-matrix approximation allows to address the pairing phenomenon in cold nuclear matter. A generalization of nuclear matter calculations to the super.uid phase is discussed and numerical results are presented for this case. The linear response of a correlated system going beyond the Hartree-Fock+ Random-Phase-Approximation (RPA) scheme is studied. The polarization is obtained by solving a consistent Bethe-Salpeter (BS) equation for the coupling of dressed nucleons to an external field. We find that multipair contributions are important for the spin(isospin) response when the interaction is spin(isospin) dependent

  9. Properties of Tricalcium Silicate Sealers.

    Science.gov (United States)

    Khalil, Issam; Naaman, Alfred; Camilleri, Josette

    2016-10-01

    Sealers based on tricalcium silicate cement aim at an interaction of the sealer with the root canal wall, alkalinity with potential antimicrobial activity, and the ability to set in a wet field. The aim of this study was to characterize and investigate the properties of a new tricalcium silicate-based sealer and verify its compliance to ISO 6876 (2012). A new tricalcium silicate-based sealer (Bio MM; St Joseph University, Beirut, Lebanon), BioRoot RCS (Septodont, St Maure de Fosses, France), and AH Plus (Dentsply, DeTrey, Konstanz, Germany) were investigated. Characterization using scanning electron microscopy, energy-dispersive spectroscopy, and X-ray diffraction analysis was performed. Furthermore, sealer setting time, flow, film thickness, and radiopacity were performed following ISO specifications. pH and ion leaching in solution were assessed by pH analysis and inductively coupled plasma. Bio MM and BioRoot RCS were both composed of tricalcium silicate and tantalum oxide in Bio MM and zirconium oxide in BioRoot RCS. In addition, the Bio MM contained calcium carbonate and a phosphate phase. The inorganic components of AH Plus were calcium tungstate and zirconium oxide. AH Plus complied with the ISO norms for both flow and film thickness. BioRoot RCS and Bio MM exhibited a lower flow and a higher film thickness than that specified for sealer cements in ISO 6876. All test sealers exhibited adequate radiopacity. Bio MM interacted with physiologic solution, thus showing potential for bioactivity. Sealer properties were acceptable and comparable with other sealers available clinically. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  10. Thermodynamic properties of sea air

    Directory of Open Access Journals (Sweden)

    R. Feistel

    2010-02-01

    Full Text Available Very accurate thermodynamic potential functions are available for fluid water, ice, seawater and humid air covering wide ranges of temperature and pressure conditions. They permit the consistent computation of all equilibrium properties as, for example, required for coupled atmosphere-ocean models or the analysis of observational or experimental data. With the exception of humid air, these potential functions are already formulated as international standards released by the International Association for the Properties of Water and Steam (IAPWS, and have been adopted in 2009 for oceanography by IOC/UNESCO.

    In this paper, we derive a collection of formulas for important quantities expressed in terms of the thermodynamic potentials, valid for typical phase transitions and composite systems of humid air and water/ice/seawater. Particular attention is given to equilibria between seawater and humid air, referred to as "sea air" here. In a related initiative, these formulas will soon be implemented in a source-code library for easy practical use. The library is primarily aimed at oceanographic applications but will be relevant to air-sea interaction and meteorology as well.

    The formulas provided are valid for any consistent set of suitable thermodynamic potential functions. Here we adopt potential functions from previous publications in which they are constructed from theoretical laws and empirical data; they are briefly summarized in the appendix. The formulas make use of the full accuracy of these thermodynamic potentials, without additional approximations or empirical coefficients. They are expressed in the temperature scale ITS-90 and the 2008 Reference-Composition Salinity Scale.

  11. Properties and synthesis of milrinone

    Directory of Open Access Journals (Sweden)

    Mirković Jelena M.

    2013-01-01

    Full Text Available Milrinone, 1,6-dihydro-2-methyl-6-oxo-[3,4’-bipyridine]-5-carbonitrile, is a positive inotropic cardiotonic agent with vasodilator properties that acts as selective phosphodiesterase 3 inhibitor in cardiac and vascular smooth muscle. Trade names of milrinone are Primacor, Corotrop, Corotrope, and Milrila. Milrinone, an amrinone derivative, is 20 to 50 times more active than amrinone and possesses reduced propensity to side effects. The use of milrinone has created controversy in the medical as the result of increased mortality rate among patients that received high amounts of milrinone in oral form. Reaserch show that it can be benifitial for patients with severe congestive heart failure when used as short-time intravenous therapy. Milrinone properties, stability, as well as mechanism of action and synthesis under laboratory and industry conditions have been described in this paper. For industrial purposes milrinone is synthesized by condensation of cyanoacetamide with 4-(dimethylamino-3-(4-pyridinyl-3-buten-2-one and 4-ethoxy-3-(4-pyridinyl-3-buten-2-one in presence of a base, or by the reaction of 1-(4-pyridinyl- 2-propanone with ethoxymethylenmalononitrile or 4-alkoxy-3-(4-pyridinyl-3-buten-2-one with malononitrile without the use of external base. The starting compound for these syntheses is 4-picoline. Alternative synthesis of milrinone starts from 2-methyl-3-(4-pyridylidiene-1,1,5-tricyano-1,4-pentadiene-5-carboxamide and 2-methyl-6-oxo-1,6-dihydro-3,4’-bipyridine-5-carboxamide. Lastly, methods for milrinone synthesis in laboratory, injection preparation and purification have been summarized.

  12. Synthesis Properties and Electron Spin Resonance Properties of Titanic Materials

    International Nuclear Information System (INIS)

    Cho, Jung Min; Lee, Jun; Kim, Tak Hee; Sun, Min Ho; Jang, Young Bae; Cho, Sung June

    2009-01-01

    Titanic materials were synthesized by hydrothermal method of TiO 2 anatase in 10M LiOH, 10M NaOH, and 14M KOH at 130 deg. C for 30 hours. Alkaline media were removed from the synthesized products using 0.1N HCl aqueous solution. The as-prepared samples were characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, Brunauer-Emmett-Teller isotherm, and electron spin resonance. Different shapes of synthesized products were observed through the typical electron microscope and indicated that the formation of the different morphologies depends on the treatment conditions of highly alkaline media. Many micropores were observed in the cubic or octahedral type of TiO 2 samples through the typical electron microscope and Langmuir adsorption-desorption isotherm of liquid nitrogen at 77 deg. K. Electron spin resonance studies have also been carried out to verify the existence of paramagnetic sites such as oxygen vacancies on the titania samples. The effect of alkali metal ions on the morphologies and physicochemical properties of nanoscale titania are discussed.

  13. Optimization of mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy by heat treatment

    Directory of Open Access Journals (Sweden)

    Mianmian Bao

    2018-03-01

    Full Text Available Previous study has shown that Ti-3Cu alloy shows good antibacterial properties (>90% antibacterial rate, but the mechanical properties still need to be improved. In this paper, a series of heat-treatment processes were selected to adjust the microstructure in order to optimize the properties of Ti-3Cu alloy. Microstructure, mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy at different conditions was systematically investigated by X-ray diffraction, optical microscope, scanning electron microscope, transmission electron microscopy, electrochemical measurements, tensile test, fatigue test and antibacterial test. Heat treatment could significantly improve the mechanical properties, corrosion resistance and antibacterial rate due to the redistribution of copper elements and precipitation of Ti2Cu phase. Solid solution treatment increased the yield strength from 400 to 740 MPa and improved the antibacterial rate from 33% to 65.2% while aging treatment enhanced the yield strength to 800–850 MPa and antibacterial rate (>91.32%. It was demonstrated that homogeneous distribution and fine Ti2Cu phase plays a very important role in mechanical properties, corrosion resistance and antibacterial properties.

  14. Optimization of mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy by heat treatment.

    Science.gov (United States)

    Bao, Mianmian; Liu, Ying; Wang, Xiaoyan; Yang, Lei; Li, Shengyi; Ren, Jing; Qin, Gaowu; Zhang, Erlin

    2018-03-01

    Previous study has shown that Ti-3Cu alloy shows good antibacterial properties (>90% antibacterial rate), but the mechanical properties still need to be improved. In this paper, a series of heat-treatment processes were selected to adjust the microstructure in order to optimize the properties of Ti-3Cu alloy. Microstructure, mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy at different conditions was systematically investigated by X-ray diffraction, optical microscope, scanning electron microscope, transmission electron microscopy, electrochemical measurements, tensile test, fatigue test and antibacterial test. Heat treatment could significantly improve the mechanical properties, corrosion resistance and antibacterial rate due to the redistribution of copper elements and precipitation of Ti 2 Cu phase. Solid solution treatment increased the yield strength from 400 to 740 MPa and improved the antibacterial rate from 33% to 65.2% while aging treatment enhanced the yield strength to 800-850 MPa and antibacterial rate (>91.32%). It was demonstrated that homogeneous distribution and fine Ti 2 Cu phase plays a very important role in mechanical properties, corrosion resistance and antibacterial properties.

  15. Elastic properties of spherically anisotropic piezoelectric composites

    International Nuclear Information System (INIS)

    En-Bo, Wei; Guo-Qing, Gu; Ying-Ming, Poon

    2010-01-01

    Effective elastic properties of spherically anisotropic piezoelectric composites, whose spherically anisotropic piezoelectric inclusions are embedded in an infinite non-piezoelectric matrix, are theoretically investigated. Analytical solutions for the elastic displacements and the electric potentials under a uniform external strain are derived exactly. Taking into account of the coupling effects of elasticity, permittivity and piezoelectricity, the formula is derived for estimating the effective elastic properties based on the average field theory in the dilute limit. An elastic response mechanism is revealed, in which the effective elastic properties increase as inclusion piezoelectric properties increase and inclusion dielectric properties decrease. Moreover, a piezoelectric response mechanism, of which the effective piezoelectric response vanishes due to the symmetry of spherically anisotropic composite, is also disclosed. (condensed matter: structure, thermal and mechanical properties)

  16. Luminescence properties of a nanoporous freshwater diatom.

    Science.gov (United States)

    Goswami, Bondita; Choudhury, Amarjyoti; Buragohain, Alak K

    2012-01-01

    Freshwater diatom frustules show special optical properties. In this paper we observed luminescence properties of the freshwater diatom Cyclotella meneghiniana. To confirm the morphological properties we present scanning electron microscopy (SEM) images. X-ray diffraction (XRD) studies were carried out to visualize the structural properties of the frustules, confirming that silica present in diatom frustules crystallizes in an α-quartz structure. Study of the optical properties of the silica frustules of diatoms using ultra-violet-visible (UV-vis) spectroscopy and photoluminescence spectroscopy confirmed that the diatom C. meneghiniana shows luminescence in the blue region of the electromagnetic spectrum when irradiated with UV light. This property of diatoms can be exploited to obtain many applications in day-to-day life. Also, using time-resolved photoluminescence spectroscopy (TRPL) it was confirmed that this species of diatom shows bi-exponential decay. Copyright © 2011 John Wiley & Sons, Ltd.

  17. Coasian and Modern Property Rights Economics

    DEFF Research Database (Denmark)

    Foss, Kirsten; Foss, Nicolai

    2015-01-01

    Laying the foundations of property rights economics stands out among Ronald Coase's many seminal contributions. This approach had an impact on a number of fields in economics in, particularly, the 1960s and 1970s. The modern body of property rights economics mainly originates in the work Oliver...... Hart and is quite different in style, scope, and implications from the original property rights economics of Coase, Demsetz, Alchian, Cheung, Umbeck, Barzel, etc. Based on our earlier work on the subject (Foss and Foss, 2001), we argue that the change from Mark I to Mark II property rights economics...... led to a substantial narrowing of the scope of property rights economics, somewhat akin to a Kuhnian loss of content. In particular, Mark II property rights economics make strong assumptions concerning the definition and enforcement of ownership rights made which lead to many real life institutions...

  18. Rheological properties of sodium smectite clay

    International Nuclear Information System (INIS)

    Boergesson, L.; Hoekmark, H.; Karnland, O.

    1988-12-01

    The rheological properties of Na-smectite Mx-80 have been investigated by various laboratory tests. The investigations include determination of the hydraulic conductivity, the undrained stress-strain-strength properties, the creep properties, the compression and swelling properties in drained and undrained conditions and the undrained thermomechanical properties. Measurements have been made at different densities, clay/sand mixtures and pore water compositions. The influence of temperature, rate of strain and testing technique has also been considered. The investigation has led to a supply of basic data for the material models which will be used at performance calculations. The results have also increased the general understanding of the function of smectitic clay as buffer material. The microstructural behaviour has been considered at the validation of the different test results and the validity of the effective stress theory has been discussed. Comparisons with the properties of Ca-smectite have also been made. (orig.)

  19. Deformation properties of lead isotopes

    International Nuclear Information System (INIS)

    Tolokonnikov, S. V.; Borzov, I. N.; Lutostansky, Yu. S.; Saperstein, E. E.

    2016-01-01

    The deformation properties of a long lead isotopic chain up to the neutron drip line are analyzed on the basis of the energy density functional (EDF) in the FaNDF 0 Fayans form. The question of whether the ground state of neutron-deficient lead isotopes can have a stable deformation is studied in detail. The prediction of this deformation is contained in the results obtained on the basis of the HFB-17 and HFB-27 Skyrme EDF versions and reported on Internet. The present analysis reveals that this is at odds with experimental data on charge radii and magnetic moments of odd lead isotopes. The Fayans EDF version predicts a spherical ground state for all light lead isotopes, but some of them (for example, 180 Pb and 184 Pb) prove to be very soft—that is, close to the point of a phase transition to a deformed state. Also, the results obtained in our present study are compared with the predictions of some other Skyrme EDF versions, including SKM*, SLy4, SLy6, and UNE1. By and large, their predictions are closer to the results arising upon the application of the Fayans functional. For example, the SLy4 functional predicts, in just the same way as the FaNDF 0 functional, a spherical shape for all nuclei of this region. The remaining three Skyrme EDF versions lead to a deformation of some light lead isotopes, but their number is substantially smaller than that in the case of the HFB-17 and HFB-27 functionals. Moreover, the respective deformation energy is substantially lower, which gives grounds to hope for the restoration of a spherical shape upon going beyond the mean-field approximation, which we use here. Also, the deformation properties of neutron-rich lead isotopes are studied up to the neutron drip line. Here, the results obtained with the FaNDF 0 functional are compared with the predictions of the HFB-17, HFB-27, SKM*, and SLy4 Skyrme EDF versions. All of the EDF versions considered here predict the existence of a region where neutron-rich lead isotopes undergo

  20. An Investigation on Properties of Transparent Concretes

    OpenAIRE

    TOPÇU, İlker Bekir; UYGUNOĞLU, Tayfun

    2016-01-01

    Transparentconcrete is a cement-based building material which has optical properties dueto the embedded light transmitting elements within the composite. In thisstudy, the design of transparent concrete, its mechanical properties, lighttransmission properties of optical fibers and the use of optic fibers werediscussed. The study was performed as a literature review, and it was focusedon the light absorption of translucent concrete, transmission, the mechanismand losses in the transmission. In...

  1. Selected mechanical properties of modified beech wood

    Directory of Open Access Journals (Sweden)

    Jiří Holan

    2008-01-01

    Full Text Available This thesis deals with an examination of mechanical properties of ammonia treated beach wood with a trademark Lignamon. For determination mechanical properties were used procedures especially based on ČSN. From the results is noticeable increased density of wood by 22% in comparison with untreated beach wood, which makes considerable increase of the most mechanical wood properties. Considering failure strength was raised by 32% and modulus of elasticity was raised at average about 46%.

  2. Lunar surface engineering properties experiment definition

    Science.gov (United States)

    Mitchell, J. K.; Goodman, R. E.; Hurlbut, F. C.; Houston, W. N.; Willis, D. R.; Witherspoon, P. A.; Hovland, H. J.

    1971-01-01

    Research on the mechanics of lunar soils and on developing probes to determine the properties of lunar surface materials is summarized. The areas of investigation include the following: soil simulation, soil property determination using an impact penetrometer, soil stabilization using urethane foam or phenolic resin, effects of rolling boulders down lunar slopes, design of borehole jack and its use in determining failure mechanisms and properties of rocks, and development of a permeability probe for measuring fluid flow through porous lunar surface materials.

  3. Properties and selection criteria for adsorbents

    International Nuclear Information System (INIS)

    Wirth, H.

    1976-01-01

    The paper gives a survey of the most important industrial adsorbents and of their suitability for different purposes. With special consideration of activated carbon, the properties and characteristic data are discussed which are used for assessing adsorbents. These, among other things, are as follows: specific surface area, pore size distribution, adsorption isotherms, hydrophobic properties, catalytic properties, chemical resistance, heat resistance, particle size and hardness. (orig.) [de

  4. Computing Mass Properties From AutoCAD

    Science.gov (United States)

    Jones, A.

    1990-01-01

    Mass properties of structures computed from data in drawings. AutoCAD to Mass Properties (ACTOMP) computer program developed to facilitate quick calculations of mass properties of structures containing many simple elements in such complex configurations as trusses or sheet-metal containers. Mathematically modeled in AutoCAD or compatible computer-aided design (CAD) system in minutes by use of three-dimensional elements. Written in Microsoft Quick-Basic (Version 2.0).

  5. Magnetic properties of metals and alloys

    International Nuclear Information System (INIS)

    Lyuborskij, F.E.; Livingston, D.D.; Chin, Zh.I.

    1987-01-01

    The nature of magnetic properties of materials and their dependence on the composition and the material structure are described. Properties and application of such materials as the alloys of the Fe-Ni-Co, Fe-Cr-Co, Co-rare earth, Fe-Si, Ni-Se system are considered. Application outlook for amorphous alloys of the (Fe, Ni, Co) 80 (metalloid) 20 type is shown. Methods for magnetic property measurement are pointed out

  6. Mechanical properties of chemically modified portuguese pinewood

    OpenAIRE

    Lopes, Duarte B; Mai, Carsten; Militz, Holger

    2014-01-01

    To turn wood into a construction material with enhanced properties, many methods of chemical modification have been developed in the last few decades. In this work, mechanical properties of pine wood were chemically modified, compared and evaluated. Maritime pine wood (Pinus pinaster) was modified with four chemical processes: 1,3-dimethylol-4,5- dihydroxyethyleneurea, N-methylol melamine formaldehyde, tetra-alkoxysilane and wax. The following mechanical properties were assessed experiment...

  7. Thixotropic Properties of Latvian Illite Containing Clays

    OpenAIRE

    Lakevičs, Vitālijs; Stepanova, Valentīna; Niedra, Santa; Dušenkova, Inga; Ruplis, Augusts

    2015-01-01

    Thixotropic properties of Latvian Devonian and Quaternary clays were studied. Dynamic viscosity of the water clay suspensions were measured with a rotating viscometer. Influence of concentration, pH and modifiers on the thixotropic clay properties was analyzed. It was found that Latvian clays have thixotropic properties. Stability of clay suspensions is described with the thixotropy hysteresis loop. Increasing the speed of the viscometer rotation, dynamic viscosity of the clay suspension decr...

  8. Prediction of cold flow properties of Biodiesel

    Directory of Open Access Journals (Sweden)

    Parag Saxena

    2016-08-01

    Full Text Available Biodiesel being environmentally friendly is fast gaining acceptance in the market as an alternate diesel fuel. But compared to petroleum diesel it has certain limitations and thus it requires further development on economic viability and improvement in its properties to use it as a commercial fuel. The cold flow properties play a major role in the usage of biodiesel commercially as it freezes at cold climatic conditions. In the present study, cold flow properties of various types of biodiesel were estimated by using correlations available in literature. The correlations were evaluated based on the deviation between the predicted value and experimental values of cold flow properties.

  9. Common Property Resource Management, Institutional Change and ...

    African Journals Online (AJOL)

    Common Property Resource Management, Institutional Change and ... Most contemporary discussions on African development since independence forty ... theories on CPR Resource Management in a specific ecological and political setting.

  10. Characterization and bulk properties of oxides

    International Nuclear Information System (INIS)

    Sonder, E.; Connolly, T.F.

    1979-06-01

    The bulk properties of oxides are divided into two classes, intrinsic properties which depend solely on the identity of the material, and extrinsic ones, which differ for different samples of the same compound. Sources of tabulated numerical values of intrinsic properties are given and modern developments in information storage and retrieval are discussed. Extrinsic properties are shown to depend on defects and trace impurities in the samples. Techniques of trace impurity analysis are discussed and realistic limits of detection and accuracies are given for routine analyses

  11. Gross properties of nuclei and nuclear excitations

    International Nuclear Information System (INIS)

    Feldmeier, H.

    1990-01-01

    The workshop contains discussions about theory and experiments with heavy ions at intermediate and relativistic energies, spallation, quark matter production and other nuclear matter properties. (BBOE)

  12. Hardmetals - microstructural design, testing and property maps

    Energy Technology Data Exchange (ETDEWEB)

    Roebuck, B; Gee, M G; Morrell, R [NPL Materials Centre, National Physical Laboratory, Teddington, Middlesex (United Kingdom)

    2001-07-01

    The production of WC/Co hardmetals and their analogues is considered a mature technology, however lately there has been new research results where the concept of microstructural design was used to produce alternatives to the conventional two-phase structure. This Industry is currently well served by a range of baseline established standards, which, if properly followed with good attention to correct quality procedures, will ensure consistent products. However, there are certain key properties such as corrosion, fatigue, impact wear or high temperature strength and toughness that are often measured but not always by standard tests methods. Microstructural design potential is reviewed, particularly the possibilities of performance improvement via changes in size, shape and distribution of the phases as well as recent developments in testing, specifically S-N fatigue and abrasive wear. Finally, the concept of property mapping is introduced as a tool for providing a framework for optimizing properties. Its utility in correlating performance properties and their relationships with microstructural parameters is evaluated. Two property maps are discussed: one where the property is plotted against a microstructural feature (microstructure property maps) such as WC grain size or Co binder phase content against coercivity or hardness and one where different properties, such as hardness and toughness are mapped against each other (comparative property maps). (nevyjel)

  13. Hardmetals - microstructural design, testing and property maps

    International Nuclear Information System (INIS)

    Roebuck, B.; Gee, M.G.; Morrell, R.

    2001-01-01

    The production of WC/Co hardmetals and their analogues is considered a mature technology, however lately there has been new research results where the concept of microstructural design was used to produce alternatives to the conventional two-phase structure. This Industry is currently well served by a range of baseline established standards, which, if properly followed with good attention to correct quality procedures, will ensure consistent products. However, there are certain key properties such as corrosion, fatigue, impact wear or high temperature strength and toughness that are often measured but not always by standard tests methods. Microstructural design potential is reviewed, particularly the possibilities of performance improvement via changes in size, shape and distribution of the phases as well as recent developments in testing, specifically S-N fatigue and abrasive wear. Finally, the concept of property mapping is introduced as a tool for providing a framework for optimizing properties. Its utility in correlating performance properties and their relationships with microstructural parameters is evaluated. Two property maps are discussed: one where the property is plotted against a microstructural feature (microstructure property maps) such as WC grain size or Co binder phase content against coercivity or hardness and one where different properties, such as hardness and toughness are mapped against each other (comparative property maps). (nevyjel)

  14. Girdler-sulfide process physical properties

    International Nuclear Information System (INIS)

    Neuburg, H.J.; Atherley, J.F.; Walker, L.G.

    1977-05-01

    Physical properties of pure hydrogen sulfide and of gaseous and liquid solutions of the H 2 S-H 2 O system have been formulated. Tables for forty-nine different properties in the pressure and temperature range of interest to the Girdler-Sulfide (GS) process for heavy water production are given. All properties are presented in SI units. A computer program capable of calculating properties of the pure components as well as gaseous mixtures and liquid solutions at saturated and non-saturated conditions is included. (author)

  15. Research of footwear lining materials thermoconductive properties

    Science.gov (United States)

    Maksudova, U.; Ilkhamova, M.; Mirzayev, N.; Pazilova, D.

    2017-11-01

    Protective properties of footwear are influenced by a number of factors and the most important of them are: design features of the top and the bottom of the footwear, it’s shape, physical and mechanical properties of the components of which they are made. In course of work there were researched thermoconductive properties of different lining membrane materials used for production of high temperature protective footwear. Research results allow to select the appropriate materials by reference to thermoconductive properties during design of protective footwear for extreme conditions to prolong the wearer’s time of comfortable stay in conditions of exposure of elevated temperatures to a stack.

  16. Mechanical properties of irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Beeston, J.M.; Longhurst, G.R.; Wallace, R.S. (EG and G Idaho, Inc., Idaho Falls, ID (United States). Idaho National Engineering Lab.); Abeln, S.P. (EG and G Rocky Flats, Inc., Golden, CO (United States))

    1992-10-01

    Beryllium is planned for use as a neutron multiplier in the tritium breeding blanket of the International Thermonuclear Experimental Reactor (ITER). After fabricating samples of beryllium at densities varying from 80 to 100% of the theoretical density, we conducted a series of experiments to measure the effect of neutron irradiation on mechanical properties, especially strength and ductility. Samples were irradiated in the Advanced Test Reactor (ATR) to a neutron fluence of 2.6 x 10[sup 25] n/m[sup 2] (E > MeV) at an irradiation temperature of 75deg C. These samples were subsequently compression-tested at room temperature, and the results were compared with similar tests on unirradiated specimens. We found that the irradiation increased the strength by approximately four times and reduced the ductility to approximately one fourth. Failure was generally ductile, but the 80% dense irradiated samples failed in brittle fracture with significant generation of fine particles and release of small quantities of tritium. (orig.).

  17. Relaxation properties in classical diamagnetism

    Science.gov (United States)

    Carati, A.; Benfenati, F.; Galgani, L.

    2011-06-01

    It is an old result of Bohr that, according to classical statistical mechanics, at equilibrium a system of electrons in a static magnetic field presents no magnetization. Thus a magnetization can occur only in an out of equilibrium state, such as that produced through the Foucault currents when a magnetic field is switched on. It was suggested by Bohr that, after the establishment of such a nonequilibrium state, the system of electrons would quickly relax back to equilibrium. In the present paper, we study numerically the relaxation to equilibrium in a modified Bohr model, which is mathematically equivalent to a billiard with obstacles, immersed in a magnetic field that is adiabatically switched on. We show that it is not guaranteed that equilibrium is attained within the typical time scales of microscopic dynamics. Depending on the values of the parameters, one has a relaxation either to equilibrium or to a diamagnetic (presumably metastable) state. The analogy with the relaxation properties in the Fermi Pasta Ulam problem is also pointed out.

  18. Electrical properties of spherical syncytia.

    Science.gov (United States)

    Eisenberg, R S; Barcilon, V; Mathias, R T

    1979-01-01

    Syncytial tissues consist of many cells whose intracellular spaces are electrically coupled one to another. Such tissues typically include narrow, tortuous extracellular space and often have specialized membranes at their outer surface. We derive differential equations to describe the potentials induced when a sinusoidal or steady current is applied to the intracellular space with a microelectrode. We derive solutions for spherical preparations with isotropic properties or with a particular anisotropy in effective extracellular and intracellular resistivities. Solutions are presented in an approximate form with a simple physical interpretation. The leading term in the intracellular potential describes an "isopotential" cell in which there is no spatial variation of intracellular potential. The leading term in the extracellular potential, and thus the potential across the inner membranes, varies with radial position, even at zero frequency. The next term of the potentials describes the direct effects of the point source of current and, for the parameters given here, acts as a series resistance producing a large local potential drop essentially independent of frequency. A lumped equivalent circuit describes the "low frequency" behavior of the syncytium, and a distributed circuit gives a reasonably accurate general description. Graphs of the spatial variation and frequency dependence of intracellular, extracellular, and transmembrane potential are given, the response to sinusoidal currents is used to calculate numerically the response to a step function of current.

  19. Photopolarimetric Retrievals of Snow Properties

    Science.gov (United States)

    Ottaviani, M.; van Diedenhoven, B.; Cairns, B.

    2015-01-01

    Polarimetric observations of snow surfaces, obtained in the 410-2264 nm range with the Research Scanning Polarimeter onboard the NASA ER-2 high-altitude aircraft, are analyzed and presented. These novel measurements are of interest to the remote sensing community because the overwhelming brightness of snow plagues aerosol and cloud retrievals based on airborne and spaceborne total reflection measurements. The spectral signatures of the polarized reflectance of snow are therefore worthwhile investigating in order to provide guidance for the adaptation of algorithms currently employed for the retrieval of aerosol properties over soil and vegetated surfaces. At the same time, the increased information content of polarimetric measurements allows for a meaningful characterization of the snow medium. In our case, the grains are modeled as hexagonal prisms of variable aspect ratios and microscale roughness, yielding retrievals of the grains' scattering asymmetry parameter, shape and size. The results agree with our previous findings based on a more limited data set, with the majority of retrievals leading to moderately rough crystals of extreme aspect ratios, for each scene corresponding to a single value of the asymmetry parameter.

  20. Thermomechanical properties of mullitic materials

    Directory of Open Access Journals (Sweden)

    Jan Urbánek

    2017-12-01

    Full Text Available Mechanical tests provide important information about the properties and behaviour of materials. Basic tests include the measurement of flexural strength and in case of refractory materials, the measurement of flexural strength at high temperatures as well. The dependence of flexural strength on the temperature of ceramic materials usually exhibits a constant progression up to a certain temperature, where the material starts to melt and so the curve begins to decline. However, it was discovered that ceramic mullitic material with a 63 wt.% of Al2O3 exhibits a relatively significant maximum level of flexural strength at about 1000 °C and refractory mullitic material with a 60 wt.% of Al2O3 also exhibits a similar maximum level at about 1100 °C. The mentioned maximum is easily reproducible, but it has no connection with the usual changes in structure of material during heating. The maximum was also identified by another measurement, for example from the progression of the dynamic Young’s modulus or from deflection curves. The aim of this work was to analyse and explain the reason for the flexural strength maximum of mullitic materials at high temperatures.

  1. Physical properties of organic coolants

    International Nuclear Information System (INIS)

    Debbage, A.G.; Garton, D.A.; Kinneir, J.H.

    1963-03-01

    Density, viscosity, specific heat, vapour pressure and calorific value were measured within the temperature range 100 - 400 deg C for mixtures of Santowax R with pyrolytic high boiler and Santowax R with O.M.R.E. radiolytic high boiler; in addition measurements were made on Santowax OM, X-7 standard, X-7 loop coolant and O.M.R.E. coolant supplied by Atomic Energy of Canada Ltd. The accuracy of the measurements made were density (± 1/4%), viscosity (± 2%), specific heat (± 2%), vapour pressure (± 2%) and calorific value (± 1/2%). Thermal conductivity was calculated from an improved form of the Smiths equation with an accuracy within ± 6%. Equations fitted to the vapour pressure results were used to provide data outside the experimental range for burnout correlation purposes. The general effect of high boiler content on the specific heat and calorific values was small. The differences in physical property values for corresponding values of either pyrolytic or radiolytic high boiler were small for density (0.3%) and specific heat (2%), but quite large for viscosity (70%) with the pyrolytic high boiler mixture giving the higher value. The chemical analysis of all materials was based on gas chromatography and the relationship between this and an earlier distillation method established. (author)

  2. Electrical properties of phosphate glasses

    International Nuclear Information System (INIS)

    Mogus-Milankovic, A; Santic, A; Reis, S T; Day, D E

    2009-01-01

    Investigation of the electrical properties of phosphate glasses where transition metal oxide such as iron oxide is the network former and network modifier is presented. Phosphate glasses containing iron are electronically conducting glasses where the polaronic conduction is due to the electron hopping from low to high iron valence state. The identification of structural defects caused by ion/polaron migration, the analysis of dipolar states and electrical conductivity in iron phosphate glasses containing various alkali and mixed alkali ions was performed on the basis of the impedance spectroscopy (IS). The changes in electrical conductivity from as-quenched phosphate glass to fully crystallized glass (glass-ceramics) by IS are analyzed. A change in the characteristic features of IS follows the changes in glass and crystallized glass network. Using IS, the contribution of glass matrix, crystallized grains and grain boundary to the total electrical conductivity for iron phosphate glasses was analyzed. It was shown that decrease in conductivity is caused by discontinuities in the conduction pathways as a result of the disruption of crystalline network where two or more crystalline phases are formed. Also, phosphate-based glasses offer a unique range of biomaterials, as they form direct chemical bonding with hard/soft tissue. The surface charges of bioactive glasses are recognized to be the most important factors in determining biological responses. The improved bioactivity of the bioactive glasses as a result of the effects of the surface charges generated by electrical polarization is discussed.

  3. Study of Jupiter polarization properties

    International Nuclear Information System (INIS)

    Bolkvadze, O.R.

    1980-01-01

    Investigations into polarization properties of the Jupiter reflected light were carried on at the Abastumani astrophysical observatory in 1967, 1968 and 1969 in the four spectral ranges: 4000, 4800, 5400 and 6600 A deg. Data on light polarization in different parts of the Jupiter visible disk are given. Curves of dependence of the planet light polarization degree on a phase angle are plotted. It is shown that in the central part of the visible planet disk the polarization degree is low. Atmosphere is in a stable state in this part of Jupiter. Mean radius of particles of a cloud layer is equal to 0.26μ, and optical thickness of overcloud atmosphere tau=0.05. Height of transition boundary of the cloud layer into overcloud gas atmosphere changes from year to year at the edges of the equatorial zone. Optical thickness of overcloud atmosphere changes also with changing height of a transient layer. The polar Jupiter regions possess a high degree of polarization which depends on a latitude. Polarization increases monotonously with the latitude and over polar regions accepts a maximum value [ru

  4. Substituted Hydroxyapatites with Antibacterial Properties

    Directory of Open Access Journals (Sweden)

    Joanna Kolmas

    2014-01-01

    Full Text Available Reconstructive surgery is presently struggling with the problem of infections located within implantation biomaterials. Of course, the best antibacterial protection is antibiotic therapy. However, oral antibiotic therapy is sometimes ineffective, while administering an antibiotic at the location of infection is often associated with an unfavourable ratio of dosage efficiency and toxic effect. Thus, the present study aims to find a new factor which may improve antibacterial activity while also presenting low toxicity to the human cells. Such factors are usually implemented along with the implant itself and may be an integral part of it. Many recent studies have focused on inorganic factors, such as metal nanoparticles, salts, and metal oxides. The advantages of inorganic factors include the ease with which they can be combined with ceramic and polymeric biomaterials. The following review focuses on hydroxyapatites substituted with ions with antibacterial properties. It considers materials that have already been applied in regenerative medicine (e.g., hydroxyapatites with silver ions and those that are only at the preliminary stage of research and which could potentially be used in implantology or dentistry. We present methods for the synthesis of modified apatites and the antibacterial mechanisms of various ions as well as their antibacterial efficiency.

  5. Substituted Hydroxyapatites with Antibacterial Properties

    Science.gov (United States)

    Kolmas, Joanna; Groszyk, Ewa; Kwiatkowska-Różycka, Dagmara

    2014-01-01

    Reconstructive surgery is presently struggling with the problem of infections located within implantation biomaterials. Of course, the best antibacterial protection is antibiotic therapy. However, oral antibiotic therapy is sometimes ineffective, while administering an antibiotic at the location of infection is often associated with an unfavourable ratio of dosage efficiency and toxic effect. Thus, the present study aims to find a new factor which may improve antibacterial activity while also presenting low toxicity to the human cells. Such factors are usually implemented along with the implant itself and may be an integral part of it. Many recent studies have focused on inorganic factors, such as metal nanoparticles, salts, and metal oxides. The advantages of inorganic factors include the ease with which they can be combined with ceramic and polymeric biomaterials. The following review focuses on hydroxyapatites substituted with ions with antibacterial properties. It considers materials that have already been applied in regenerative medicine (e.g., hydroxyapatites with silver ions) and those that are only at the preliminary stage of research and which could potentially be used in implantology or dentistry. We present methods for the synthesis of modified apatites and the antibacterial mechanisms of various ions as well as their antibacterial efficiency. PMID:24949423

  6. Statistical properties of barium stars

    International Nuclear Information System (INIS)

    Hakkila, J.E.

    1986-01-01

    Barium stars are G- and K-giant stars with atmospheric excesses of s-process elements, and a broadband spectral depression in the blue portion of the spectrum. The strength of the λ4554 Ball line is used as a classification parameter known as the Barium Intensity. They have a mean absolute magnitude of 1.0 and a dispersion of 1.2 magnitudes (assuming a Gaussian distribution in absolute magnitude) as measured from secular and statistical parallaxes. These stars apparently belong to a young-disk population from analyses of both the solar reflex motion and their residual velocity distribution, which implies that they have an upper mass limit of around three solar masses. There is no apparent correlation of barium intensity with either luminosity or kinematic properties. The barium stars appear to be preferentially distributed in the direction of the local spiral arm, but show no preference to associate with or avoid the direction of the galactic center. They do not appear related to either the carbon or S-stars because of these tendencies and because of the stellar population to which each type of star belongs. The distribution in absolute magnitude combined with star count analyses implies that these stars are slightly less numerous than previously believed. Barium stars show infrared excesses that correlate with their barium intensities

  7. Approximation properties of haplotype tagging

    Directory of Open Access Journals (Sweden)

    Dreiseitl Stephan

    2006-01-01

    Full Text Available Abstract Background Single nucleotide polymorphisms (SNPs are locations at which the genomic sequences of population members differ. Since these differences are known to follow patterns, disease association studies are facilitated by identifying SNPs that allow the unique identification of such patterns. This process, known as haplotype tagging, is formulated as a combinatorial optimization problem and analyzed in terms of complexity and approximation properties. Results It is shown that the tagging problem is NP-hard but approximable within 1 + ln((n2 - n/2 for n haplotypes but not approximable within (1 - ε ln(n/2 for any ε > 0 unless NP ⊂ DTIME(nlog log n. A simple, very easily implementable algorithm that exhibits the above upper bound on solution quality is presented. This algorithm has running time O((2m - p + 1 ≤ O(m(n2 - n/2 where p ≤ min(n, m for n haplotypes of size m. As we show that the approximation bound is asymptotically tight, the algorithm presented is optimal with respect to this asymptotic bound. Conclusion The haplotype tagging problem is hard, but approachable with a fast, practical, and surprisingly simple algorithm that cannot be significantly improved upon on a single processor machine. Hence, significant improvement in computatational efforts expended can only be expected if the computational effort is distributed and done in parallel.

  8. Antioxidant Properties of Probiotic Bacteria

    Directory of Open Access Journals (Sweden)

    Yang Wang

    2017-05-01

    Full Text Available Oxidative stress defines a condition in which the prooxidant–antioxidant balance in the cell is disturbed, resulting in DNA hydroxylation, protein denaturation, lipid peroxidation, and apoptosis, ultimately compromising cells’ viability. Probiotics have been known for many beneficial health effects, and the consumption of probiotics alone or in food shows that strain-specific probiotics can present antioxidant activity and reduce damages caused by oxidation. However, the oxidation-resistant ability of probiotics, especially the underling mechanisms, is not properly understood. In this view, there is interest to figure out the antioxidant property of probiotics and summarize the mode of action of probiotic bacteria in antioxidation. Therefore, in the present paper, the antioxidant mechanisms of probiotics have been reviewed in terms of their ability to improve the antioxidant system and their ability to decrease radical generation. Since in recent years, oxidative stress has been associated with an altered gut microbiota, the effects of probiotics on intestinal flora composition are also elaborated.

  9. Sparse PCA with Oracle Property.

    Science.gov (United States)

    Gu, Quanquan; Wang, Zhaoran; Liu, Han

    In this paper, we study the estimation of the k -dimensional sparse principal subspace of covariance matrix Σ in the high-dimensional setting. We aim to recover the oracle principal subspace solution, i.e., the principal subspace estimator obtained assuming the true support is known a priori. To this end, we propose a family of estimators based on the semidefinite relaxation of sparse PCA with novel regularizations. In particular, under a weak assumption on the magnitude of the population projection matrix, one estimator within this family exactly recovers the true support with high probability, has exact rank- k , and attains a [Formula: see text] statistical rate of convergence with s being the subspace sparsity level and n the sample size. Compared to existing support recovery results for sparse PCA, our approach does not hinge on the spiked covariance model or the limited correlation condition. As a complement to the first estimator that enjoys the oracle property, we prove that, another estimator within the family achieves a sharper statistical rate of convergence than the standard semidefinite relaxation of sparse PCA, even when the previous assumption on the magnitude of the projection matrix is violated. We validate the theoretical results by numerical experiments on synthetic datasets.

  10. Teenage experiments contaminate suburban property

    International Nuclear Information System (INIS)

    Lall, P.; Jensen, L.; Mitchell, J.; Sass, W.; Skowronek, R.; Minnaar, D.

    1999-01-01

    In August 1994, 18-year-old David Hahn (David) was detained by police in Clinton Township, Michigan. When the police searched his car, they discovered a locked tool box and other containers that David said contained radioactive materials resulting from experiments he had conducted with the radioactive materials from, primarily, consumer products. From the ages 14 to 18, David spent his spare time at his Union Lake, Michigan, home attempting to concentrate, bum, chemically alter, and experiment with: the thorium from hundreds of lantern mantles, radium from various luminescent sources and clock dials, americium from smoke detector sources, and radioactive materials from natural ores. In the process, he had contaminated a wooden shed in his backyard and his bedroom, and exposed himself. In 1995, EPA, their emergency response contractor, and the Michigan Department of Public Health (MDPH) performed an emergency assessment and removal at the property. The response and removal were conducted cost-effectively and generated approximately 10 cubic yards of radioactive waste. (author)

  11. Optical properties of carbon nanotubes

    Science.gov (United States)

    Chen, Gugang

    This thesis addresses the optical properties of novel carbon filamentary nanomaterials: single-walled carbon nanotubes (SWNTs), double-walled carbon nanotubes (DWNTs), and SWNTs with interior C60 molecules ("peapods"). Optical reflectance spectra of bundled SWNTs are discussed in terms of their electronic energy band structure. An Effective Medium Model for a composite material was found to provide a reasonable description of the spectra. Furthermore, we have learned from optical absorption studies of DWNTs and C60-peapods that the host tube and the encapsulant interact weakly; small shifts in interband absorption structure were observed. Resonant Raman scattering studies on SWNTs synthesized via the HiPCO process show that the "zone-folding" approximation for phonons and electrons works reasonably well, even for small diameter (d effect, rather than the vdW interaction. Finally, we studied the chemical doping of DWNTs, where the dopant (Br anions) is chemically bound to the outside of the outer tube. The doped DWNT system is a model for a cylindrical molecular capacitor. We found experimentally that 90% of the positive charge resides on the outer tube, so that most of electric field on the inner tube is screened, i.e., we have observed a molecular Faraday cage effect. A self-consistent theoretical model in the tight-binding approximation with a classical electrostatic energy term is in good agreement with our experimental results.

  12. Deformation properties of lead isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Tolokonnikov, S. V.; Borzov, I. N.; Lutostansky, Yu. S.; Saperstein, E. E., E-mail: saper43-7@mail.ru [National Research Center Kurchatov Institute (Russian Federation)

    2016-01-15

    The deformation properties of a long lead isotopic chain up to the neutron drip line are analyzed on the basis of the energy density functional (EDF) in the FaNDF{sup 0} Fayans form. The question of whether the ground state of neutron-deficient lead isotopes can have a stable deformation is studied in detail. The prediction of this deformation is contained in the results obtained on the basis of the HFB-17 and HFB-27 Skyrme EDF versions and reported on Internet. The present analysis reveals that this is at odds with experimental data on charge radii and magnetic moments of odd lead isotopes. The Fayans EDF version predicts a spherical ground state for all light lead isotopes, but some of them (for example, {sup 180}Pb and {sup 184}Pb) prove to be very soft—that is, close to the point of a phase transition to a deformed state. Also, the results obtained in our present study are compared with the predictions of some other Skyrme EDF versions, including SKM*, SLy4, SLy6, and UNE1. By and large, their predictions are closer to the results arising upon the application of the Fayans functional. For example, the SLy4 functional predicts, in just the same way as the FaNDF{sup 0} functional, a spherical shape for all nuclei of this region. The remaining three Skyrme EDF versions lead to a deformation of some light lead isotopes, but their number is substantially smaller than that in the case of the HFB-17 and HFB-27 functionals. Moreover, the respective deformation energy is substantially lower, which gives grounds to hope for the restoration of a spherical shape upon going beyond the mean-field approximation, which we use here. Also, the deformation properties of neutron-rich lead isotopes are studied up to the neutron drip line. Here, the results obtained with the FaNDF{sup 0} functional are compared with the predictions of the HFB-17, HFB-27, SKM*, and SLy4 Skyrme EDF versions. All of the EDF versions considered here predict the existence of a region where neutron

  13. Nanocarbon: Defect Architectures and Properties

    Science.gov (United States)

    Vuong, Amanda

    The allotropes of carbon make its solid phases amongst the most diverse of any element. It can occur naturally as graphite and diamond, which have very different properties that make them suitable for a wide range of technological and commercial purposes. Recent developments in synthetic carbon include Highly Oriented Pyrolytic Graphite (HOPG) and nano-carbons, such as fullerenes, nanotubes and graphene. The main industrial application of bulk graphite is as an electrode material in steel production, but in purified nuclear graphite form, it is also used as a moderator in Advanced Gas-cooled Reactors across the United Kingdom. Both graphene and graphite are damaged over time when subjected to bombardment by electrons, neutrons or ions, and these have a wide range of effects on their physical and electrical properties, depending on the radiation flux and temperature. This research focuses on intrinsic defects in graphene and dimensional change in nuclear graphite. The method used here is computational chemistry, which complements physical experiments. Techniques used comprise of density functional theory (DFT) and molecular dynamics (MD), which are discussed in chapter 2 and chapter 3, respectively. The succeeding chapters describe the results of simulations performed to model defects in graphene and graphite. Chapter 4 presents the results of ab initio DFT calculations performed to investigate vacancy complexes that are formed in AA stacked bilayer graphene. In AB stacking, carbon atoms surrounding the lattice vacancies can form interlayer structures with sp2 bonding that are lower in energy compared to in-plane reconstructions. From the investigation of AA stacking, sp2 interlayer bonding of adjacent multivacancy defects in registry creates a type of stable sp2 bonded wormhole between the layers. Also, a new class of mezzanine structure characterised by sp3 interlayer bonding, resembling a prismatic vacancy loop has also been identified. The mezzanine, which is a

  14. Biofuel properties and combustion experiences

    Energy Technology Data Exchange (ETDEWEB)

    Sander, B [Faelleskemikerne, Elsamprojekt A/S, Fredericia (Denmark)

    1996-12-01

    In Denmark the electric utility groups ELSAM and ELKRAFT are, due to government demands, obliged to utilize large amounts of biomass for power production. By the year 2000, 1,200,000 tonnes of straw and 200,000 tonnes of wood chips will be used annually. This paper gives an overview of the fuel properties of Danish straw and wood chips compared with coal. It is shown that straw has a much higher content of potassium and chlorine than wood chips and coal and this causes a number of serious technical problems in power production plants. Therefore, it has been investigated whether it is possible to reduce the content of potassium and chlorine in straw from the field. Cultivation trials have been carried out in the growing seasons of 1993, 1994 and 1995. In the first year it was investigated how different cultivation factors influence the chemical composition of straw. In the two following year the aim was to study how the chlorine supply from fertilizers influences the straw composition and it was shown that the chlorine content of straw can be reduced by using chlorine-free fertilizers. Use of straw as a fuel in existing pulverized coal-fired units may be accomplished by co-firing straw and coal in the boiler or by establishing a separate grate-fired boiler for straw and wood chips which supplies steam to the steam turbine of the coal-fired power plant. This paper describes some of the experiences with emissions, residues and deposit formation which have been gained for these types of plants in Denmark. (au)

  15. Vibrational properties of complex solids

    International Nuclear Information System (INIS)

    Fagas, G.

    1999-11-01

    Following a brief outline of the statistical analysis of spectra with respect to random matrix theory predictions and of numerical methods for calculating the elastic scattering matrix, statistical studies of vibrational spectra in disordered and complex solids, as well as studies of phonon transport across imperfect structures, are presented. The analysis of spectral statistics of lattice modes in a disordered crystal, confirmed GOE Wigner-Dyson statistical correlations of the eigenmode frequencies of a block of a disordered solid. Spectral correlations in the optic phonon spectrum of a solid with a polyatomic unit cell are also analysed using the Wigner-Dyson statistical approach. Despite the fact that all force constants are real, it is demonstrated that the statistics are predominantly of the GUE type depending on the location within the Brillouin zone of a crystal and the unit cell symmetry. Analytic and numerical results for the crossover from GOE to GUE statistics are presented. A method originally developed to probe electron transport on a mesoscopic scale is used to study generic properties of elastic phonon transport at a disordered interface. The results show that phonon transmittance is a strong function of frequency and the disorder correlation length. At low frequencies the transmittance at a given frequency increases as the correlation length decreases. This is also reflected by different power-laws for phonon conductance across correlated and uncorrelated disordered interfaces which are in approximate agreement with perturbation theory of an elastic continuum. Finally we present an analysis of acoustic-phonon propagation across long, free-standing, insulating wires with rough surfaces. We find that owing to a crossover from ballistic propagation of the lowest-frequency phonon mode at ω 1 πc/W to a diffusive (or even localized) behavior upon the increase of phonon frequency, followed by reentrance into the quasiballistic regime, the heat

  16. Synthesis and optical properties studies

    Directory of Open Access Journals (Sweden)

    N.A. El-Ghamaz

    2017-01-01

    Full Text Available 4-(4-Amino-1,5-dimethyl-2-phenyl-1,2-dihydro-pyrazol-3-ylideneamino-phenol (L1 and 4-(4-Amino-1,5-dimethyl-2-phenyl-1,2-dihydro-pyrazol-3-ylideneamino-benzoic acid (L2 have been synthesized by the condensation reaction of 4-aminoantipyrine (4-AAP and 4-aminophenol or 4-aminobenzoic acid in ethanolic solution and are characterized by various physico-chemical techniques. Thin films of L1 and L2 have been prepared by the conventional spin coating technique. X-ray diffraction patterns (XRD show an amorphous nature for both powder and thin films for L1 and L2 ligands. The optical absorption and refraction properties of L1 and L2 are investigated by spectrophotometric techniques at normal incidence of light in the wavelength range of 200–2500 nm. The absorption spectra show two peaks in the UV region which correspond to π → π∗ transition and a peak in UV–Vis region which may correspond to n → π∗ transition. The values of dispersion parameters Eo, Ed, εL, ε∞ and N/m* are calculated according to the single oscillator model. The presence of the OH group increases the value of ε∞ from 3.21 to 3.32 and the value of N/m* from 7.38 × 1053 to 2.08 × 1054 m−3Kg−1. The optical band transition is found to be indirect allowing fundamental energy gap values of 3.4 and 3.9 eV and onset energy gap values of 2.1 and 2.6 eV for L1 and L2, respectively.

  17. Vector properties in molecular photodissociation

    International Nuclear Information System (INIS)

    Underwood, J.

    1999-12-01

    The technique of resonance enhanced multi-photon ionization (REMPI) of atomic and molecular species produced from a photofragmentation event combined with time-of flight (TOF) detection is used to examine scalar and vector properties following photodissociation. This technique is applied to the study of methyl bromide dissociation in a product state specific manner. We report measurements of the angular distributions and kinetic energy releases of the resulting bromine atoms in the ground and first spin-orbit excited state. Additionally we report measurements of the angular distributions and kinetic energy releases of the methyl fragment in the ground vibrational state, and also the excited state with one quanta in the ν 2 vibrational modes. These studies were carried out in the red wing of the absorption band at several wavelengths. For these measurements we were able to resolve the spin orbit state of the partner bromine fragment. From our observations we find new evidence for enhanced nonadiabatic curve crossing active in methyl bromide dissociation in comparison with earlier studies of methyl iodide. The atomic polarization produced following photodissociation of a diatomic molecule was investigated both theoretically and experimentally. We develop theoretical expressions relating the lab frame and molecular frame atomic polarization to the photoexcitation and subsequent dissociation of a diatomic molecule. This treatment includes both incoherent, coherent and non-adiabatic processes which may be active in the photodissociation process. We treat the general case of a polarized diatomic molecule yielding two fragments with non zero angular momentum. Experimentally, an investigation of the polarization of atomic Cl( 2 P 3/2 ) photofragments from the ∼330 nm photolysis of molecular chlorine using the REMPI-TOF technique is reported. We present a theoretical framework in which to treat such experiments allowing the extraction of parameters with direct physical

  18. Thermal Properties and Thermal Analysis:

    Science.gov (United States)

    Kasap, Safa; Tonchev, Dan

    The chapter provides a summary of the fundamental concepts that are needed to understand the heat capacity C P, thermal conductivity κ, and thermal expansion coefficient α L of materials. The C P, κ, and α of various classes of materials, namely, semiconductors, polymers, and glasses, are reviewed, and various typical characteristics are summarized. A key concept in crystalline solids is the Debye theory of the heat capacity, which has been widely used for many decades for calculating the C P of crystals. The thermal properties are interrelated through Grüneisen's theorem. Various useful empirical rules for calculating C P and κ have been used, some of which are summarized. Conventional differential scanning calorimetry (DSC) is a powerful and convenient thermal analysis technique that allows various important physical and chemical transformations, such as the glass transition, crystallization, oxidation, melting etc. to be studied. DSC can also be used to obtain information on the kinetics of the transformations, and some of these thermal analysis techniques are summarized. Temperature-modulated DSC, TMDSC, is a relatively recent innovation in which the sample temperature is ramped slowly and, at the same time, sinusoidally modulated. TMDSC has a number of distinct advantages compared with the conventional DSC since it measures the complex heat capacity. For example, the glass-transition temperature T g measured by TMDSC has almost no dependence on the thermal history, and corresponds to an almost step life change in C P. The new Tzero DSC has an additional thermocouple to calibrate better for thermal lags inherent in the DSC measurement, and allows more accurate thermal analysis.

  19. Magnetic properties of layered superconductors

    International Nuclear Information System (INIS)

    Mansky, P.A.

    1993-01-01

    The organic superconductors (BEDT-TTF) 2 Cu(SNC) 2 and (TMTSF) 2 ClO 4 , with T c = 10K and 1.2K, have layered and highly anisotropic crystal structures. This thesis describes AC magnetic susceptibility measurements on these materials which illustrate the consequences of the discrete layered structure for the magnetic properties of the superconducting state. A DC magnetic field applied parallel to the layers of either material causes the rapid suppression of the AC screening response, and this indicates that the pinning restoring force for vortex motion parallel to the layers is anomalously weak in this orientation. This is believed to be due to the small size of the interlayer coherence length relative to the layer spacing. A simple estimate based on the energy and length scales relevant to Josephson coupled layers gives the correct order of magnitude for the pinning force. Pinning for vortices oriented perpendicular to the layers is larger by a factor of 500 for BEDT and 25 for TMTSF. When the DC field is applied at an angle to the layers, the initial suppression of the susceptibility is identical to that for a field parallel to the layers; when the field component normal to the layers exceeds a threshold, a sharp recovery of screening occurs. These observations indicate that the field initially enters the sample only in the direction parallel to the layers. The recovery of screening signals field penetration in the perpendicular direction at higher field strength, and is due to the onset of pinning by in-plane vortex cores. This magnetic open-quotes lock-inclose quotes effect is a qualitatively new behavior and is a direct consequence of weak interlayer coupling. The London penetration depth associated with interlayer currents is found to be on the order of hundreds of microns, comparable to that of a Josephson junction, and two to three orders of magnitude larger than for conventional superconductors

  20. Structural, dielectric and electrical properties of ...

    Indian Academy of Sciences (India)

    Administrator

    Detailed studies of dielectric properties of the compound as a function of temperature at ... Microscope (Jeol, JSM-840), operated at 20 kV. The sin- tered pellet was .... grain boundaries, and provides the true picture of the electrical properties of ...

  1. 28 CFR 70.36 - Intangible property.

    Science.gov (United States)

    2010-07-01

    ...-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 70.36 Intangible property. (a) The... purchased, under an award. The Department reserves a royalty-free, nonexclusive and irrevocable right to..., peer reviews, or communications with colleagues. This “recorded” material excludes physical objects (e...

  2. Enhancement of mechanical properties of 123 superconductors

    Science.gov (United States)

    Balachandran, U.

    1995-04-25

    A composition and method are disclosed of preparing YBa{sub 2}Cu{sub 3}O{sub 7{minus}x} superconductor. Addition of tin oxide containing compounds to YBCO superconductors results in substantial improvement of fracture toughness and other mechanical properties without affect on T{sub c}. About 5-20% additions give rise to substantially improved mechanical properties.

  3. Enhancement of mechanical properties of 123 superconductors

    Science.gov (United States)

    Balachandran, Uthamalingam

    1995-01-01

    A composition and method of preparing YBa.sub.2 Cu.sub.3 O.sub.7-x superconductor. Addition of tin oxide containing compounds to YBCO superconductors results in substantial improvement of fracture toughness and other mechanical properties without affect on T.sub.c. About 5-20% additions give rise to substantially improved mechanical properties.

  4. Physical properties of organic soils. Chapter 5.

    Science.gov (United States)

    Elon S. Verry; Don H. Boelter; Juhani Paivanen; Dale S. Nichols; Tom Malterer; Avi Gafni

    2011-01-01

    Compared with research on mineral soils, the study of the physical properties of organic soils in the United States is relatively new. A comprehensive series of studies on peat physical properties were conducted by Don Boelter (1959-1975), first at the Marcell Experimental Forest (MEF) and later throughout the northern Lakes States to investigate how to express bulk...

  5. Expiration of private property rights: a note

    Directory of Open Access Journals (Sweden)

    Walter E. Block

    2015-05-01

    Full Text Available According to libertarian law, upon what occasions may a person’s private property rights in goods, commodities, in himself, be alienated from him? The present paper is an attempt to wrestle with this question. We consider abandonment, punishment, salvage, misplacement, liberation of property.

  6. Transfer of property inter vivos : chapter 7

    NARCIS (Netherlands)

    van Vliet, Lars

    2017-01-01

    This chapter will give an overview of the various transfer systems for movable property and immovable property. It will focus on voluntary transfers based on a legal act between the transferor and transferee. First the difference between the unitary approach and the functional approach to passing of

  7. Drying characteristics and engineering properties of fermented ...

    African Journals Online (AJOL)

    The effect of variety on the drying and engineering properties of fermented ground cassava was studied in order to generate data for design and optimum performance of various dryers used in cassava processing. This research attempts to provide data on the engineering properties such as moisture content, specific heat ...

  8. Effect of mixing on properties of SCC

    DEFF Research Database (Denmark)

    Geiker, Mette Rica; Ekstrand, John Peter; Hansen, Rune

    2007-01-01

    agglomerates will remain. The paper focuses on the effect of mixing schedule on self-compacting concrete properties. Workability and micro structure of a typical Danish self-compacting concrete mixed at varying intensity and with addition of superplasticizer in either one or two batches are described....... The observations indicate that the most homogeneous concrete does not necessarily exhibit the lowest rheological properties....

  9. Evaluation of Physicochemical Properties of Biodiesel Produced ...

    African Journals Online (AJOL)

    The non-edible vegetable oils of Jatropha curcas, neem, castor, rubber and edible oils of soyabean and cotton were investigated for their use as biodiesel feedstock. The analysis of different oil properties, fuel properties of non-edible and edible vegetable oils were investigated in detail. A two-step and transesterification ...

  10. Production and antimicrobial property of glycolipid biosurfactants

    Science.gov (United States)

    Microbial glycolipids such as rhamnolipid (RL) and sophorolipid (SL) are an important class of biosurfactants with excellent surface tension-lowering activity. Besides their surfactant- and environment-friendly properties, however, additional value-added property such as bacteriocidal activity is n...

  11. 14 CFR 1273.31 - Real property.

    Science.gov (United States)

    2010-01-01

    ... percentage of participation in the cost of the original purchase to the fair market value of the property... GRANTS AND COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes... subgrantee's percentage of participation in the purchase of the real property to the current fair market...

  12. 13 CFR 143.31 - Real property.

    Science.gov (United States)

    2010-01-01

    ... percentage of participation in the cost of the original purchase to the fair market value of the property... FOR GRANTS AND COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Changes... subgrantee's percentage of participation in the purchase of the real property to the current fair market...

  13. Lumber stress grades and design properties

    Science.gov (United States)

    David E. Kretschmann; David W. Green

    1999-01-01

    Lumber sawn from a log, regardless of species and size, is quite variable in mechanical properties. Pieces may differ in strength by several hundred percent. For simplicity and economy in use, pieces of lumber of similar mechanical properties are placed in categories called stress grades, which are characterized by (a) one or more sorting criteria, (b) a set of...

  14. Unravelling property relations around forest carbon

    NARCIS (Netherlands)

    Mahanty, S.; Dressler, W.H.; Milne, S.; Filer, C.

    2013-01-01

    Market-based interventions to Reduce Emissions from Deforestation and Forest Degradation (REDD+) enable the carbon stored in land and forests to be traded as a new and intangible form of property. Using examples from Cambodia, the Philippines and Papua New Guinea, we examine the property

  15. Structural and dynamical properties of Yukawa balls

    International Nuclear Information System (INIS)

    Block, D; Kroll, M; Arp, O; Piel, A; Kaeding, S; Ivanov, Y; Melzer, A; Henning, C; Baumgartner, H; Ludwig, P; Bonitz, M

    2007-01-01

    To study the structural and dynamical properties of finite 3D dust clouds (Yukawa balls) new diagnostic tools have been developed. This contribution describes the progress towards 3D diagnostics for measuring the particle positions. It is shown that these diagnostics are capable of investigating the structural and dynamical properties of Yukawa balls and gaining insight into their basic construction principles

  16. Approximation properties of fine hyperbolic graphs

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... In this paper, we propose a definition of approximation property which is called the metric invariant translation approximation property for a countable discrete metric space. Moreover, we use ... Department of Applied Mathematics, Shanghai Finance University, Shanghai 201209, People's Republic of China ...

  17. Financial development, property rights, and growth

    OpenAIRE

    Claessens, Stijn; Laeven, Luc

    2002-01-01

    The authors analyze how property rights affect the allocation of firms' available resources among different types of assets. In particular, they investigate empirically for a large number of countries whether firms in environments with more secure property rights allocate available resources more toward intangible assets and consequentially grow faster. The authors find that improved asset...

  18. 22 CFR 226.36 - Intangible property.

    Science.gov (United States)

    2010-04-01

    ... Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Property Standards § 226.36 Intangible property. (a) The... Organizations and Small Business Firms Under Government Grants, Contracts and Cooperative Agreements.” (c) The...

  19. Pelletizing properties of torrefied wheat straw

    DEFF Research Database (Denmark)

    Stelte, Wolfgang; Nielsen, Niels Peter; Hansen, Hans Ove

    2013-01-01

    of wheat straw have been analyzed. Laboratory equipment has been used to investigate the pelletizing properties of wheat straw torrefied at temperatures between 150 and 300 °C. IR spectroscopy and chemical analyses have shown that high torrefaction temperatures change the chemical properties of the wheat...

  20. Framework for managing uncertainty in property projects

    NARCIS (Netherlands)

    Reymen, I.M.M.J.; Dewulf, G.P.M.R.; Blokpoel, S.B.

    2008-01-01

    A primary task of property development (or real estate development, RED) is making assessments and managing risks and uncertainties. Property managers cope with a wide range of uncertainties, particularly in the early project phases. Although the existing literature addresses the management of

  1. Dynamic mechanical properties of buffer material

    International Nuclear Information System (INIS)

    Takaji, Kazuhiko; Taniguchi, Wataru

    1999-11-01

    The buffer material is expected to maintain its low water permeability, self-sealing properties, radionuclides adsorption and retardation properties, thermal conductivity, chemical buffering properties, overpack supporting properties, stress buffering properties, etc. over a long period of time. Natural clay is mentioned as a material that can relatively satisfy above. Among the kinds of natural clay, bentonite when compacted is superior because (i) it has exceptionally low water permeability and properties to control the movement of water in buffer, (ii) it fills void spaces in the buffer and fractures in the host rock as it swells upon water uptake, (iii) it has the ability to exchange cations and to adsorb cationic radioelements. In order to confirm these functions for the purpose of safety assessment, it is necessary to evaluate buffer properties through laboratory tests and engineering-scale tests, and to make assessments based on the ranges in the data obtained. This report describes the procedures, test conditions, results and examinations on the buffer material of dynamic triaxial tests, measurement of elastic wave velocity and liquefaction tests that aim at getting hold of dynamic mechanical properties. We can get hold of dependency on the shearing strain of the shearing modulus and hysteresis damping constant, the application for the mechanical model etc. by dynamic triaxial tests, the acceptability of maximum shearing modulus obtained from dynamic triaxial tests etc. by measurement of elastic wave velocity and dynamic strength caused by cyclic stress etc. by liquefaction tests. (author)

  2. On Boolean functions with generalized cryptographic properties

    NARCIS (Netherlands)

    Braeken, A.; Nikov, V.S.; Nikova, S.I.; Preneel, B.; Canteaut, A.; Viswanathan, K.

    2004-01-01

    By considering a new metric, we generalize cryptographic properties of Boolean functions such as resiliency and propagation characteristics. These new definitions result in a better understanding of the properties of Boolean functions and provide a better insight in the space defined by this metric.

  3. Critical Properties of Pure and Random Antiferromagnets

    DEFF Research Database (Denmark)

    Cowley, R. A.; Carneiro, K.

    1980-01-01

    Neutron scattering techniques have been used to study the critical properties of CoF2 and the randomly mixed systems: Co/ZnF2 and KMn/NiF3. The results for CoF2 are in excellent accord with the critical properties of the three-dimensional Ising model. In all of the random crystals studied the tra...

  4. Review of Particle Properties, 1982-1983

    CERN Document Server

    Particle Data Group. Berkeley; Porter, F C; Aguilar-Benítez, M; Montanet, Lucien; Walck, C; Crawford, R L; Kelly, Robert L; Rittenberg, Alan; Trippe, Thomas G; Wohl, Charles G; Yost, George P; Shimada, T; Losty, Michael J; Gopal, Gian P; Hendrick, R E; Shrock, R E; Frosch, R; Roper, L D; Armstrong, Betty

    1982-01-01

    This review of the properties of leptons, mesons, and baryons is an updating of Review of Particle Properties, Particle Data Group [Rev. Mod. Phys. 52 (1980) No. 2, Part II]. Data are evaluated, listed, averaged, and summarized in tables. Numerous tables, figures, and formulae of interest to particle physicists are also included. A data booklet is available.

  5. Dispersion properties of photonic crystal fibres

    DEFF Research Database (Denmark)

    Bjarklev, Anders Overgaard; Broeng, Jes; Dridi, Kim

    1998-01-01

    Approximate dispersion and bending properties of all-silica two-dimensional photonic crystal fibres are characterised by the combination of an effective-index model and classical analysis tools for optical fibres. We believe for the first time to have predicted the dispersion properties of photonic...... crystal fibres. The results strongly indicate that these fibres have potential applications as dispersion managing components...

  6. Approximation properties of fine hyperbolic graphs

    Indian Academy of Sciences (India)

    2010 Mathematics Subject Classification. 46L07. 1. Introduction. Given a countable discrete group G, some nice approximation properties for the reduced. C∗-algebras C∗ r (G) can give us the approximation properties of G. For example, Lance. [7] proved that the nuclearity of C∗ r (G) is equivalent to the amenability of G; ...

  7. Mechanical properties of gamma-aluminium oxynitride

    NARCIS (Netherlands)

    Willems, H.X.; Hal, van P.F.; With, de G.; Metselaar, R.

    1993-01-01

    Mech. properties have been measured of three compositionally different types of g-aluminum oxynitride (Alon). The compns. corresponded to 67.5, 73 and 77.5 mol% Al2O3. To characterize the Alons, lattice parameters, densities, grain sizes and optical properties were measured. The measurements for the

  8. Properties of spatial Cox process models

    DEFF Research Database (Denmark)

    Møller, Jesper

    Probabilistic properties of Cox processes of relevance for statistical modelling and inference are studied. Particularly, we study the most important classes of Cox processes, including log Gaussian Cox processes, shot noise Cox processes, and permanent Cox processes. We consider moment properties...... and point process operations such as thinning, displacements, and superpositioning. We also discuss how to simulate specific Cox processes....

  9. Soil properties from seismic intrinsic dispersion

    NARCIS (Netherlands)

    Zhubayev, A.S.

    2014-01-01

    Theoretical and experimental studies in the past have shown the sensitivity of seismic waves to soil/rock properties, such as composition, porosity, pore fluid, and permeability. However, quantitative characterization of these properties has remained challenging. In case of unconsolidated soils, the

  10. Physicochemical composition and antioxidant properties of a ...

    African Journals Online (AJOL)

    Physicochemical composition and antioxidant properties of a sweetpotato variety ( Ipomoea batatas L) commercially sold in South Eastern Nigeria. ... Results show that this sweet potato variety has potentials of biological properties and could have wide utility in food, alcohol and sugar industries. In addition, it could serve as ...

  11. Intellectual Property Policies at Canadian Universities

    OpenAIRE

    Hen, M.

    2010-01-01

    The present study examines the Intellectual Property policies at schools selected from Research Infosource’s Canada’s Top 50 research universities 2009 (http://www.researchinfosource.com/). This work is a continuation and extension of Dr. Bruce P. Clayman’s original idea and piece University intellectual property policies.

  12. 7 CFR 767.51 - Property abandonment.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF..., manage, and operate the abandoned security property, including marketing perishable security property on behalf of the borrower when such action is in the Agency's financial interest. If the security is in...

  13. Magic Formula Tyre Model with Transient Properties

    NARCIS (Netherlands)

    Pacejka, H.B.; Besselink, I.J.M.

    1997-01-01

    The tyre force and moment generating properties connected with the vehicle's horizontal motions are considered. Knowledge of tyre properties is necessary to properly design vehicle components and advanced control systems. For this purpose, mathematical models of the tyre are being used in vehicle

  14. Spectral properties of billiards and quantum chaos

    Energy Technology Data Exchange (ETDEWEB)

    Schmit, C [Institut de Physique Nucleaire, 91 - Orsay (France)

    1984-06-01

    The first 800 eigenvalues of the stadium billiard have been evaluated numerically. It is shown that the four spectra obtained (corresponding to the four types of symmetry of the wave function) exhibit the fluctuation properties of the Gaussian Orthogonal Ensemble of Random Matrices. This reinforces the belief that these fluctuation properties are characteristic of quantum chaotic systems.

  15. Effects of composition on waste glass properties

    International Nuclear Information System (INIS)

    Mellinger, G.B.; Chick, L.A.

    1979-01-01

    The electrical conductivity, viscosity, chemical durability, devitrification, and crystallinity of a defense waste glass were measured. Each oxide component in the glass was varied to determine its effect on these properties. A generic study is being developed which will determine the effects of 26 oxides on the above and additional properties of a wide field of possible waste glasses. 5 figures, 2 tables

  16. The strong reflecting property and Harrington's Principle

    OpenAIRE

    Cheng, Yong

    2015-01-01

    In this paper we characterize the strong reflecting property for $L$-cardinals for all $\\omega_n$, characterize Harrington's Principle $HP(L)$ and its generalization and discuss the relationship between the strong reflecting property for $L$-cardinals and Harrington's Principle $HP(L)$.

  17. Important physical properties of peat materials

    Science.gov (United States)

    D.H. Boelter

    1968-01-01

    Peat materials from 12 bogs in northern Minnesota, U.S.A., showed significant differences in physical properties. It is pointed out that 1) these properties can be related to the hydrology of organic soils only if the soils represent undisturbed field conditions, and 2) volumetric expressions of water content are necessary to correctly evaluate the amount of water in a...

  18. Thermal, electrochemical and mechanical properties of shape

    African Journals Online (AJOL)

    T. Ahmad

    2017-05-01

    May 1, 2017 ... C for 30 min with two pre-stressing conditions of straight and ... of nitinol mesh into technical fabric for examining it weaving properties as compared to ... nitinol wire showed better properties of weaving as compared to stainless steel. Ming et ... Phase transformation temperature was determined by DSC at a.

  19. Symmetry Properties of Potentiometric Titration Curves.

    Science.gov (United States)

    Macca, Carlo; Bombi, G. Giorgio

    1983-01-01

    Demonstrates how the symmetry properties of titration curves can be efficiently and rigorously treated by means of a simple method, assisted by the use of logarithmic diagrams. Discusses the symmetry properties of several typical titration curves, comparing the graphical approach and an explicit mathematical treatment. (Author/JM)

  20. Path and semimartingale properties of chaos processes

    DEFF Research Database (Denmark)

    Basse-O'Connor, Andreas; Graversen, Svend-Erik

    2010-01-01

    The present paper characterizes various properties of chaos processes which in particular include processes where all time variables admit a Wiener chaos expansion of a fixed finite order. The main focus is on the semimartingale property, p-variation and continuity. The general results obtained...

  1. 36 CFR 1210.32 - Real property.

    Science.gov (United States)

    2010-07-01

    ... Section 1210.32 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION GENERAL... Government after it compensates the Federal Government for that percentage of the current fair market value... that percentage of the current fair market value of the property attributable to the Federal...

  2. Effectiveness of Property Tax Relief in Oregon.

    Science.gov (United States)

    Hartman, William T.; Hwang, C. S.

    This study examines the effects of the 1979 Oregon Property Tax Relief Plan on 1980-81 school district budget decisions by comparing the available tax relief, the school expenditures, and the tax levies in the state for the years 1975-81. The history of direct and indirect property tax relief in Oregon is sketched for the years prior to 1979; the…

  3. SOME PHYSICOCHEMICAL PROPERTIES AND APPLICATION OF ...

    African Journals Online (AJOL)

    The α-cellulose was also employed as disintegrant in some tablet formulations. Some of the physicochemical and flow properties evaluated were, moisture content, bulk density, packed density, Carrs compressibility, angle of repose and Hausner quotient. The tablet properties studied were, disintegration time, hardness, ...

  4. Intangible Property : Defining Intangible Property for Transfer Pricing Purposes and Exploring the Concept of Economic Ownership

    OpenAIRE

    Eriksson, Emma

    2010-01-01

    In this thesis the definition of intangible property contained in the Transfer Pricing Guidelines is analysed with the aim of exploring whether it is satisfactory or not. Furthermore, the need to have a definition of intangible property for transfer pricing purposes at all is explored. To properly allocate income and expenditure relating to intangible property one needs to first establish who is the owner of the property. In the light of this the economic ownership is explored as well. Two co...

  5. Theory of the property valuation + valuation of specific property in Prague 6

    OpenAIRE

    Wurst, David

    2011-01-01

    The objective of Bachelor thesis is the definition of basic terms and methods used in the property valuation and the subsequent valuation of specific property. The thesis is divided into theoretical and practical part. The theoretical part is devoted to (description) describing the basic terms and bases needed for the valuation and characteristics of the most widely used methods of property valuation. In the practical part is going to be made the valuation of the specific property by the comp...

  6. Evaluation and Future Direction of Intellectual Property Strategy - Setting out a new intellectual property policy - (Japanese)

    OpenAIRE

    KUGAI Takashi

    2010-01-01

    1. An intellectual property strategy is a policy aimed at improving the international competitiveness of industry and reinvigorating the economy through the creation, protection, and greater use of intellectual property. 2. The realization of IP policies conventionally considered difficult to implement and greater awareness of intellectual property at all levels of society, as demonstrated the establishment of Intellectual Property High Courts that exclusively and solely handle intellectual p...

  7. Shear and extensional properties of kefiran.

    Science.gov (United States)

    Piermaría, Judith; Bengoechea, Carlos; Abraham, Analía Graciela; Guerrero, Antonio

    2016-11-05

    Kefiran is a neutral polysaccharide constituted by glucose and galactose produced by Lactobacillus kefiranofaciens. It is included into kefir grains and has several health promoting properties. In the present work, shear and extensional properties of different kefiran aqueous dispersions (0.5, 1 and 2% wt.) were assessed and compared to other neutral gums commonly used in food, cosmetic and pharmaceutics industries (methylcellulose, locust bean gum and guar gum). Kefiran showed shear flow characteristics similar to that displayed by other representative neutral gums, although it always yielded lower viscosities at a given concentration. For each gum system it was possible to find a correlation between dynamic and steady shear properties by a master curve including both the apparent and complex viscosities. When studying extensional properties of selected gums at 2% wt. by means of a capillary break-up rheometer, kefiran solutions did not show important extensional properties, displaying a behaviour close the Newtonian. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. THE LEGAL PROTECTION OF THE PROPERTY RIGHT

    Directory of Open Access Journals (Sweden)

    Anda CRISU-CIOCÎNTĂ

    2015-04-01

    Full Text Available The property right has been acknowledged as one of the personal fundamental rights since a very long time. It enjoys complete legal protection provided on the top of the national legislation hierarchy by constitutional norms as well as by juridical norms specific to the various legal branches where the property is present. The property right is protected consistently and by means of the criminal law, mainly by those juridical norms that incriminate the illicit behaviours which bring prejudice, as well as by the norms that regulate other criminal right institutions such as those ones which are specific to the safety measures with a patrimonial character. After examining the juridical norms that protect the property, the conclusion is that the juridical protection is awarded only if the property right has a licit character.

  9. On topological properties of sierpinski networks

    International Nuclear Information System (INIS)

    Imran, Muhammad; Sabeel-e-Hafi; Gao, Wei; Reza Farahani, Mohammad

    2017-01-01

    Sierpinski graphs constitute an extensively studied class of graphs of fractal nature applicable in topology, mathematics of Tower of Hanoi, computer science, and elsewhere. A large number of properties like physico-chemical properties, thermodynamic properties, chemical activity, biological activity, etc. are determined by the chemical applications of graph theory. These properties can be characterized by certain graph invariants referred to as topological indices. In QRAR/QSPR study these graph invariants has played a vital role. In this paper, we study the molecular topological properties of Sierpinski networks and derive the analytical closed formulas for the atom-bond connectivity (ABC) index, geometric-arithmetic (GA) index, and fourth and fifth version of these topological indices for Sierpinski networks denoted by S(n, k).

  10. Physical properties of organic fullerene cocrystals

    Science.gov (United States)

    Macovez, Roberto

    2017-12-01

    The basic facts and fundamental properties of binary fullerene cocrystals are reviewed, focusing especially on solvates and salts of Buckminsterfullerene (C60), and hydrates of hydrophilic C60 derivatives. The examined properties include the lattice structure and the presence of orientational disorder and/or rotational dynamics (of both fullerenes and cocrystallizing moieties), thermodynamic properties such as decomposition enthalpies, and charge transport properties. Both thermodynamic properties and molecular orientational disorder shed light on the extent of intermolecular interactions in these binary solid-state systems. Comparison is carried out also with pristine fullerite and with the solid phases of functionalized C60. Interesting experimental findings on binary fullerene cocrystals include the simultaneous occurrence of rotations of both constituent molecular species, crystal morphologies reminiscent of quasi-crystalline behaviour, the observation of proton conduction in hydrate solids of hydrophilic fullerene derivatives, and the production of super-hard carbon materials by application of high pressures on solvated fullerene crystals.

  11. Measuring solvent barrier properties of paper

    International Nuclear Information System (INIS)

    Bollström, Roger; Saarinen, Jarkko J; Toivakka, Martti; Räty, Jukka

    2012-01-01

    New methods for measuring barrier properties against solvents, acids and bases on dispersion coated paper were developed and investigated. Usability, reliability and repeatability were compared both between the new methods and with the standardized method for measuring barrier properties against water vapor. Barrier properties could be measured with all methods and the results obtained by the different methods were in correlation with each other. A qualitative method based on a trace color provided an indicative result, whereas further developed methods also took into account the durability. The effective barrier lifetime could be measured by measuring the conductivity through the substrate as a function of time, or by utilizing a glass prism where the change in refractive index caused by penetrated liquid was monitored, also as a function of time. Barrier properties against water and humidity were also measured and were found not to be predictors for barrier properties against either solvents, or acids or bases, which supports the need to develop new methods

  12. Mechanical properties of rock at high temperatures

    International Nuclear Information System (INIS)

    Kinoshita, Naoto; Abe, Tohru; Wakabayashi, Naruki; Ishida, Tsuyoshi.

    1997-01-01

    The laboratory tests have been performed in order to investigate the effects of temperature up to 300degC and pressure up to 30 MPa on the mechanical properties of three types of rocks, Inada granite, Sanjoume andesite and Oya tuff. The experimental results indicated that the significant differences in temperature dependence of mechanical properties exist between the three rocks, because of the difference of the factors which determine the mechanical properties of the rocks. The effect of temperature on the mechanical properties for the rocks is lower than that of pressure and water content. Temperature dependence of the mechanical properties is reduced by increase in pressure in the range of pressure and temperature investigated in this paper. (author)

  13. Processing hexavalent uranium gels and their properties

    International Nuclear Information System (INIS)

    Landspersky, H.; Benadik, A.; Spitzer, Z.

    1980-01-01

    The properties of xerogels of ammonium polyuranate prepared by various drying procedures were studied. The individual drying procedures affect differently both the chemical structure of the material (its composition) and the physicochemical properties of the final product (specific surface area, porosity). In addition, the physicochemical properties of xerogels depend on the properties of the starting material, i.e., on the type of the initial gel. The physicochemical properties of xerogels, in particular their porosity, are in turn relevant for their subsequent high-temperature processing. The porous structure is essential for thermal treatment. The structure of xerogels obtained by distillation procedures is affected both by the conditions of azeotropic distillation and by the medium employed. By judicious selection of these two variables it is possible to prepare materials with different pore size distributions. (author)

  14. Dosimetric properties of MOS transistors

    International Nuclear Information System (INIS)

    Frank, H.; Petr, I.

    1977-01-01

    The structure of MOS transistors is described and their characteristics given. The experiments performed and data in the literature show the following dosimetric properties of MOS transistors: while for low gamma doses the transistor response to exposure is linear, it shows saturation for higher doses (exceeding 10 3 Gy in tissue). The response is independent of the energy of radiation and of the dose rate (within 10 -2 to 10 5 Gy/s). The spontaneous reduction with time of the spatial charge captured by the oxide layer (fading) is small and acceptable from the point of view of dosimetry. Curves are given of isochronous annealing of the transistors following irradiation with 137 Cs and 18 MeV electrons for different voltages during irradiation. The curves show that in MOS transistors irradiated with high-energy electrons the effect of annealing is less than in transistors irradiated with 137 Cs. In view of the requirement of using higher temperatures (approx. 400 degC) for the complete ''erasing'' of the captured charge, unsealed systems must be used for dosimetric purposes. The effect was also studied of neutron radiation, proton radiation and electron radiation on the MOS transistor structure. For MOS transistor irradiation with 14 MeV neutrons from a neutron generator the response was 4% of that for gamma radiation at the same dose equivalent. The effect of proton radiation was studied as related to the changes in MOS transistor structure during space flights. The response curve shapes are similar to those of gamma radiation curves. The effect of electron radiation on the MOS structure was studied by many authors. The experiments show that for each thickness of the SiO 2 layer an electron energy exists at which the size of the charge captured in SiO 2 is the greatest. All data show that MOS transistors are promising for radiation dosimetry. The main advantage of MOS transistors as gamma dosemeters is the ease and speed of evaluation, low sensitivity to neutron

  15. Optimization of bentonite pellet properties

    International Nuclear Information System (INIS)

    Sanden, Torbjoern; Andersson, Linus; Jonsson, Esther; Fritzell, Anni

    2012-01-01

    Document available in extended abstract form only. SKB in Sweden is developing and implementing concepts for the final disposal of spent nuclear fuel. A KBS-3V repository consists of a deposition tunnel with copper canisters containing spent fuel placed in vertical deposition holes. The canisters are embedded in highly compacted bentonite. After emplacement of canisters and bentonite blocks, the tunnels will be backfilled and sealed with an in-situ cast plug at the entrance. The main concept for backfilling the deposition tunnels imply pre compacted blocks of bentonite stacked on a bed of bentonite pellet. The remaining slot between blocks and rock will be filled with bentonite pellets. The work described in this abstract is a part of the ASKAR-project which main goal is to make a system design based on the selected concept for backfilling. Immediately after starting the backfill installation, inflowing water from the rock will come in contact with the pellet filling and thereby influence the characteristics of the pellet filling. The pellet filling helps to increase the average density of the backfill, but one of the most important properties beside this is the water storing capacity which will prevent water from reaching the backfill front where it would disturb and influence the quality of the installation. If water flows through the pellet filling out to the backfilling front, there will be erosion of material which also will affect the quality of the installed backfill. In order to optimize the properties regarding water storing capacity and sensitivity for erosion a number of tests have been made with different pellet types. The tests were made in different scales and with equipment specially designed for the purpose. The performed tests can be divided in four parts: 1. Standard tests (determining water content and density of pellet fillings and individual pellets, compressibility of the pellet fillings and strength of the individual pellets); 2. Erosion

  16. Silver Matrix Composites - Structure and Properties

    Directory of Open Access Journals (Sweden)

    Wieczorek J.

    2016-03-01

    Full Text Available Phase compositions of composite materials determine their performance as well as physical and mechanical properties. Depending on the type of applied matrix and the kind, amount and morphology of the matrix reinforcement, it is possible to shape the material properties so that they meet specific operational requirements. In the paper, results of investigations on silver alloy matrix composites reinforced with ceramic particles are presented. The investigations enabled evaluation of hardness, tribological and mechanical properties as well as the structure of produced materials. The matrix of composite material was an alloy of silver and aluminium, magnesium and silicon. As the reinforcing phase, 20-60 μm ceramic particles (SiC, SiO2, Al2O3 and Cs were applied. The volume fraction of the reinforcing phase in the composites was 10%. The composites were produced using the liquid phase (casting technology, followed by plastic work (the KOBO method. The mechanical and tribological properties were analysed for plastic work-subjected composites. The mechanical properties were assessed based on a static tensile and hardness tests. The tribological properties were investigated under dry sliding conditions. The analysis of results led to determination of effects of the composite production technology on their performance. Moreover, a relationship between the type of reinforcing phase and the mechanical and tribological properties was established.

  17. Amino acid properties conserved in molecular evolution.

    Directory of Open Access Journals (Sweden)

    Witold R Rudnicki

    Full Text Available That amino acid properties are responsible for the way protein molecules evolve is natural and is also reasonably well supported both by the structure of the genetic code and, to a large extent, by the experimental measures of the amino acid similarity. Nevertheless, there remains a significant gap between observed similarity matrices and their reconstructions from amino acid properties. Therefore, we introduce a simple theoretical model of amino acid similarity matrices, which allows splitting the matrix into two parts - one that depends only on mutabilities of amino acids and another that depends on pairwise similarities between them. Then the new synthetic amino acid properties are derived from the pairwise similarities and used to reconstruct similarity matrices covering a wide range of information entropies. Our model allows us to explain up to 94% of the variability in the BLOSUM family of the amino acids similarity matrices in terms of amino acid properties. The new properties derived from amino acid similarity matrices correlate highly with properties known to be important for molecular evolution such as hydrophobicity, size, shape and charge of amino acids. This result closes the gap in our understanding of the influence of amino acids on evolution at the molecular level. The methods were applied to the single family of similarity matrices used often in general sequence homology searches, but it is general and can be used also for more specific matrices. The new synthetic properties can be used in analyzes of protein sequences in various biological applications.

  18. Thermoluminescence dosimetry materials: properties and uses

    International Nuclear Information System (INIS)

    McKeever, S.W.S.; Moscovitch, M.; Townsend, P.D.

    1995-01-01

    This book selects a range of the most popular thermoluminescence dosemeter (TLD) materials in use today and provides a critical account of their thermoluminescence (TL) and dosimetric properties. The information provided includes in-depth discussions of TL mechanisms, including an account of luminescence properties, and relevant information regarding dosimetric characteristics. The book is intended for those involved in TLD materials research, and for technicians and workers involved in the practical application of these materials in TL dosimetry. The advent of modern spectroscopic methods for measuring TL emission spectra (the so-called ''3-D'' presentation) seemed to the authors to be an invitation to compile such spectra for all the major TLD materials. Further consideration led to an expansion of the initial idea to include a compilation of dosimetric properties. One intention is to provide a synopsis of the TL and dosimetric properties of the most widely used TLD materials currently available and to form a link between the solid state defect properties of these materials and their actual dosimetric properties. A second intention is to provide a solid framework from which future studies of TLD materials could be launched. Too often in the past research into TLD materials has been haphazard, to say the least. By illustrating the links between solid state physics and the radiation dosimetry properties of these materials the book points to the future and to the pressing need for enhanced research on TLD materials. (Author)

  19. Environmental audits of oil and gas properties

    International Nuclear Information System (INIS)

    Moody, T.D.; Forbes, S.

    1991-01-01

    The growing concern over one, the cost of correcting environmental damage and two, the potential financial liabilities associated with the acquisition, sale or lease of oil and gas properties, has led many prospective buyers to investigate the environmental liabilities associated with the property transfer. The environmental audit provides a tool or mechanism to assist the prudent investor in identifying environmental problems that could adversely effect an otherwise normal business activity. Accordingly, an environmental audit can identify potential environmental liabilities associated with the property, thus allowing the investor an opportunity to better assess financial risks. In addition, should the negative findings of the environmental audit be limited, the findings could be used by the buyer in negotiating the final price of the subject property to account for potential or known liabilities. As this suggests, environmental damage to an oil and gas property does not necessarily render the property worthless. This paper provides a brief guide on environmental audits of oil and gas properties as well as general information on the most common exploration and production wastes

  20. Nuclear property insurance: status and outlook

    International Nuclear Information System (INIS)

    1982-05-01

    The report addresses the problem of the unavailability of adequate levels of property insurance for commercial power reactors to pay for decontamination and cleanup costs arising from accidents. The report is designed to answer six questions, as follows: (1) What has been the development of each principal source of nuclear property insurance used as of early 1982 by nuclear utilities in the United States; (2) What are some of the distinguishing features of nuclear property insurance as offered by the principal sources; (3) How much nuclear property insurance was offered by each of these sources as of January 1, 1982; (4) Assuming that present plans came to fruition, how much nuclear property insurance is likely to be offered by each of these sources as of January 1, 1983; (5) What, if any, principal sources of nuclear property insurance are likely to emerge in the private sector by January 1, 1983; (6) What problems serious enough to warrant action of the NRC exist with respect to nuclear property insurance and what action should NRC take in response to each problem