Environmental-friendly wool fabric finishing by some water plant extracts

Directory of Open Access Journals (Sweden)

Šmelcerović Miodrag

2007-01-01

Full Text Available In this article, environmental-friendly finishing of wool fabric were processed with several water extract plants, such as hibiscus, St. John's wort, and marigold. The plant extracts have good basis in the commercial dyeing of wool, for garment and carpet industry. At the same time, the environmental-friendly finishing by water extracts plants shows very good fastness of the antimicrobial properties and coloration of wool fabric. From an ecological viewpoint, the substitution of chemical dyes with "natural products" may represent not only a strategy to reduce risk and pollutants but also an opportunity for new markets and new businesses, which can expend involving of ecology in trade policy.

Environmentally Friendly Pretreatment for Department of Defense Applications

Science.gov (United States)

2012-08-29

Develop an environmentally friendly pretreatment system for multi-material Department of Defense applications ― Free of hexavalent chromium (Cr6...Zn phosphate and chrome wash primer •Two Zirconium pretreatment variations passed the 336 hr and 1000 hr B-117 outlined per MIL-DTL-53022 or MIL

Environmental Friendly Coatings and Corrosion Prevention For Flight Hardware Project

Science.gov (United States)

Calle, Luz

2014-01-01

Identify, test and develop qualification criteria for environmentally friendly corrosion protective coatings and corrosion preventative compounds (CPC's) for flight hardware an ground support equipment.

Design of environmentally friendly calcium sulfate-based building materials : towards an improved indoor air quality

NARCIS (Netherlands)

Yu, Q.

2012-01-01

This thesis addresses the performance based design and development of an environmentally friendly calcium sulfate-based indoor building product towards an improved indoor air quality. Here "environmental friendly" is referred to the environment related subjects including: (1) the selection of raw

A Survey on Turkish Elementary School Students' Environmental Friendly Behaviours and Associated Variables

Science.gov (United States)

Alp, Elvan; Ertepinar, Hamide; Tekkaya, Ceren; Yilmaz, Ayhan

2008-01-01

This study investigated elementary school students' environmental knowledge and attitudes, the effects of sociodemographic variables on environmental knowledge and attitudes, and how self-reported environmentally friendly behaviour is related to environmental knowledge, behavioural intentions, environmental affects, and the students' locus of…

The Impact of Individual Attitudinal and Organisational Variables on Workplace Environmentally Friendly Behaviours

OpenAIRE

Manika, D; Wells, VK; Gregory-Smith, D; Gentry, M

2015-01-01

Although research on corporate social responsibility (CSR) has grown steadily, little research has focused on CSR at the individual level. In addition, research on the role of environmental friendly organizational citizenship behaviors (OCBs) within CSR initiatives is scarce. In response to this gap and recent calls for further research on both individual and organizational variables of employees' environmentally friendly, or green, behaviors, this article sheds light on the influence of thes...

Testing of environmentally friendly lubricants for sheet metal forming

DEFF Research Database (Denmark)

Bay, Niels; Olsson, David Dam; Andreasen, Jan Lasson

2005-01-01

the authors have especially been involved in the development of a system of test methods for sheet metal forming and in testing of friction and limits of lubrication of new, environmentally friendly lubricants. An overview of the developed tests is presented together with selected results....

Green technological foresight on environmental friendly agriculture: Executive summary

DEFF Research Database (Denmark)

Borch, K.; Christensen, S.; Jørgensen, U.

2005-01-01

Risø and the co-operators have on behalf of the Forest and Nature Agency completed a technological foresight on environmentally friendly agriculture based on green technologies. A technological foresight is a systematic dialogue on how one prepares forfuture challenges, which have not yet manifes...

Printed environmentally friendly supercapacitors with ionic liquid electrolytes on paper

Science.gov (United States)

Pettersson, F.; Keskinen, J.; Remonen, T.; von Hertzen, L.; Jansson, E.; Tappura, K.; Zhang, Y.; Wilén, C.-E.; Österbacka, R.

2014-12-01

Environmentally friendly supercapacitors are fabricated using commercial grade aluminum coated paper as a substrate and symmetrical activated carbon electrodes as large area electrodes. Different choline chloride-based eutectic solvents are used as electrolyte. These are inexpensive, environmentally friendly and have a larger operating window compared to that of water electrolytes. As the entire device is printed and the materials used are inexpensive, both small- and large-area power sources can be fabricated to be used in cheap, disposable and recyclable devices. Supercapacitors with different eutectic solvents are measured using cyclic charge-discharge and impedance spectroscopy measurements and compared to one widely used and one "green" imidazolium ionic liquid; EMIM:TFSI and EcoEng 212™, respectively. A mixture of ethylene glycol and choline chloride, Glyceline™, show the highest capacitance and power densities of the electrolytes being tested, including the imidazolium alternatives.

Child-Friendly Cities: A Place for Active Citizenship in Geographical and Environmental Education

Science.gov (United States)

Wilks, Judith

2010-01-01

This research was designed to investigate innovative practices associated with child-friendly cities initiatives in the United Kingdom and Italy and how civics and citizenship initiatives are being applied into practical programmes of exploration and learning in geography and environmental education. The Child-Friendly Cities Initiative (CFCI) of…

Cross-Cultural Investigation of Consumers’ Generations Attitudes Towards Purchase of Environmentally Friendly Products in Apparel Retail

OpenAIRE

Dabija Dan-Cristian; Chebeň Juraj; Lančarič Drahoslav

2017-01-01

Recent changes of the environment and in the society have altered consumers’ preferences and brought new concerns among local communities regarding environmental protection and organizations responsibility, the adoption of environmentally friendly strategies, as well as offering more sustainable products. Consumers tend to select retailers based on their focus on environmental friendly products and on various “green” strategies regarding waste disposal, package recycling, etc. This study aims...

Development of environmentally friendly briquettes

International Nuclear Information System (INIS)

Kleisa, K.; Lehmann, J.; Verfuss, F.; Simon, G.

1994-01-01

The DMT has developed an industrial briquette consisting of about 87% hardcoal, 7% molasses pulp and 6% hydration limestone which meets the requirements of the clean air authority as an environmentally friendly fuel for travelling grate boilers. In extensive tests in a 4.4 MW travelling grate boiler these briquettes with molasses and limestone additives proved to be particularly effective in terms of reducing sulphur dioxide emission in the flue gas. They exhibited good ignition and combustion behaviour as well as a considerable reduction in nitrogen oxide emission. In a large-scale test with 1000 t of briquettes in a 46.5 MW travelling grate furnace it proved possible to confirm the good combustion behaviour and the reduced emission of sulphur oxide and nitrogen oxide in the flue gas. (orig.) [de

Activism: A Strong Predictor of Proactive Environmentally Friendly Buying Behavior in Turkey

OpenAIRE

Ahu Ergen; Filiz Bozkurt; Caner Giray

2016-01-01

The market for environmentally friendly products in Turkey is growing, and marketing experts are trying to understand the behavior of the consumers in this market with the help of variables such as demographic factors, information, attitudes, values and life styles. This study analyzes the effects of environmental activism, environmental knowledge and the perceived seriousness of environmental problems on green buying behavior. The study involved 516 Turkish consumers, over eighteen years of ...

Development of environmentally friendly messages to promote longer durations of breastfeeding for already breastfeeding mothers.

Science.gov (United States)

Hamilton, Amanda E

2015-01-01

Durations of breastfeeding activity in the United States fall short of established recommendations by leading public health institutions. In response to this problem, this study sought to develop environmentally friendly messages to promote continued breastfeeding for moms already breastfeeding in order to help them reach recommended breastfeeding durations. Messages were successfully cultivated to encourage moms already breastfeeding to meet recommended breastfeeding durations. In addition, this study cultivated strategies by which to use environmentally friendly messages to urge mothers who still need to decide whether to breastfeed or formula feed to breastfeed, although this was not the purpose of the research. Avenues for future communication-based breastfeeding research were also elucidated. The Elaboration Likelihood Model serves as useful theory to assess the role of environmentally friendly messages in the promotion of continued breastfeeding.

Pre-Service Teacher Opinions about Eco-Friendly Person Activity Package Developed to Raise Environmental Awareness

Science.gov (United States)

Candan, Sevcan; Erten, Sinan

2015-01-01

In this study, the effectiveness of Eco-Friendly Person Activity Package developed in order to raise environmental awareness in pre-service teachers and enable them to be an example of an eco-friendly teacher for their future students, and the responses about Eco-Friendly Person Activity Package were investigated. The study was conducted on 75…

Production of environmentally friendly aerated concrete with required construction and operational properties

Directory of Open Access Journals (Sweden)

Tkach Evgeniya

2018-01-01

Full Text Available The purpose of these studies is to justify the feasibility of recycling different types of industrial waste instead of conventional expensive raw materials in production of environmentally friendly aerated concrete with required construction and operational properties. The impact of wastes from various industries on the environmental condition of affected areas, as well as the results of their environmental assessment were analyzed to determine whether these wastes could be used in production of high-performance building materials. The assessment of industrial wastes in aerated concrete production suggests that industrial wastes of hazard class IV can be recycled to produce aerated concrete. An environmentally friendly method for large-scale waste recycling, including a two-step environmentally sustainable mechanism, was developed. The basic quality indicators of the modified aerated concrete proved that the environmental safety could be enhanced by strengthening the structure, increasing its uniformity and improving thermal insulation properties. The modified non-autoclaved aerated concrete products with improved physical and operational properties were developed. They have the following properties: density – D700; class of concrete – B3.5; thermal transmittance coefficient – 0.143 W/(m·°C; frost resistance – F75.

Teaching Ecology to Children of Preschool Education to Instill Environmentally Friendly Behaviour

Science.gov (United States)

Ferreira, Maria Eduarda; Cruz, Catarina; Pitarma, Rui

2016-01-01

This qualitative study analyzes the results of a pedagogical and didactic experiment which was focused on the problem of teaching environmentally-friendly behaviours to young kindergarten children. It is essential to awaken children's curiosity and desire to know more about environmental issues in their regions so that children develop their own…

University of Illinois FRIENDS Children’s Environmental Health Center

Data.gov (United States)

Federal Laboratory Consortium — The FRIENDS Children's Environmental Health Center at the University of Illinois, Urbana-Champaign, was established in 2001 to investigate the interactive effects of...

Environmental impact assessment and eco-friendly decision-making in civil structures.

Science.gov (United States)

Kim, Sang-Hyo; Choi, Moon-Seock; Mha, Ho-Seong; Joung, Jung-Yeun

2013-09-15

This study develops two useful procedures in performing an environmental-impact assessment. One is the advanced life-cycle assessment (LCA) method, which effectively tracks the flow of materials and considers the recycling and demolition of a civil structure. The other is an eco-friendly decision-making procedure, which may effectively apply when determining the prototype of a civil structure. The advanced LCA method differs from traditional LCA procedure, as it classifies the input material prior to the impact assessment. Classification work is performed to establish independent life-cycle stages for each material. The processes of recycling and demolition are appropriately added to the life-cycle stages. The impact assessment is performed separately for the materials, and results are aggregated at the end of the analysis. The eco-friendly decision-making procedure enables designers to choose an economical, and environmentally friendly, alternative during the planning phase of the construction project. This procedure rationally amalgamates economical value and environmental effects into a single indicator. The life cycle cost (LCC) of a structure can be analysed by using conventional LCC tools, whereas the environmental impact is estimated by LCA. The results from LCC and LCA are then integrated by using either a CO2 conversion method or an analytical hierarchy process (AHP). The CO2 conversion method presents the result as a monetary value, whereas the AHP presents the result as a non-dimensional value. A practical example using a steel box girder bridge and a pre-stressed concrete (PSC) box-girder bridge is also given in order to aid the understanding of the presented procedure. Copyright © 2013 Elsevier Ltd. All rights reserved.

Environmental-Friendly and Facile Synthesis of Co3O4 Nanowires and Their Promising Application with Graphene in Lithium-Ion Batteries

Science.gov (United States)

Xu, Zhiqiang; Liu, Wei; Yang, Yuanyi; Sun, Lijuan; Deng, Yi; Liao, Li

2017-12-01

In this work, we developed an eco-friendly strategy for preparing Co3O4 nanowires. The process consisted of two steps: controllable synthesis of metal cobalt nanowires followed by a facile air-oxidization step. The 1D nanowire structure with a high aspect ratio was easily achieved via a magnetic-field-assisted self-assembly of cobalt ion complexes during reduction. After air-calcinations, the Co3O4 nanowires were prepared in large scale and ready to be used as the anode material for lithium-ion batteries. The Co3O4 nanowires, which possessed a length ranging from 3 to 8 μm with the aspect ratio more than 15, exhibited a reversible lithium storage capacity up to 790 mAh/g when using a small amount of defect-free graphene flakes as conductive additives. The superior electrochemical performances were ascribable to the synergistic "flat-on" effect between the 1D nanowires and the 2D graphene. Therefore, the Co3O4 nanowire/graphene composite holds promising application for lithium-ion batteries.

Application of Green Environmentally Friendly Materials in Food Packaging

Directory of Open Access Journals (Sweden)

Jixia Li

2017-11-01

Full Text Available With social development, requirements on the spiritual and material life have increased. However, some environmental issues appear, for example, in food packaging. Application of environment-friendly materials in food packaging has been more and more attractive. This study analyses the characteristics of degradable food packaging material and the existing problems, proposes the manufacturing of food packaging with poly(lactic acid/nanocrystalline cellulose composite material, tests its thermal and mechanical properties, and applies it to the design of food packaging. The results demonstrate that the thermal and mechanical properties of the material could satisfy the requirements of food packaging and that the material is applicable to the design of food packaging in the future. This work provides a reference for the application of green, environment-friendly materials in the design of food packaging.

Environmentally Friendly Cleaners for Removing Tar from Metal Surfaces

Science.gov (United States)

2009-04-01

treatment plants that handle phosphate type solu- tions. The terms used by commercial vendors such as environmentally friendly, all natural, green, and...solvents used in relation to diesel fuel, and the procedure can also rank solvents quantitatively. Sacco (2004) has studied the blending of two plant ...other bituminous materials from industrial equipment surfaces. The composition is a mixture of a carrier monocyclic monoterpene and a nonionic

Application of Green Environmentally Friendly Materials in Food Packaging

OpenAIRE

Jixia Li

2017-01-01

With social development, requirements on the spiritual and material life have increased. However, some environmental issues appear, for example, in food packaging. Application of environment-friendly materials in food packaging has been more and more attractive. This study analyses the characteristics of degradable food packaging material and the existing problems, proposes the manufacturing of food packaging with poly(lactic acid)/nanocrystalline cellulose composite material, tests its therm...

Development and application of an environmentally friendly ductile alkali-activated composite

NARCIS (Netherlands)

Nedeljkovic, M.; Lukovic, M.; van Breugel, K.; Hordijk, D.A.; Ye, G.

2018-01-01

This paper presents a development of a ductile alkali-activated fly ash (FA) and ground granulated blast furnace slag (GBFS) based composite as an environmentally friendly material for structural concrete application. For this purpose, polyvinyl alcohol (PVA) fibres and sand aggregate were

Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

Science.gov (United States)

Pearman, B. P.; Calle, L. M.; Zhang, X.; Li, W.; Buhrow, J. W.; Johnsey, M. N.; Montgomery, E. L.; Fitzpatrick, L.; Surma, J. M.

2015-01-01

The NASA Kennedy Space Center's Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion indicators, inhibitors and self-healing agents. This allows the incorporation of autonomous corrosion control functionalities, such as corrosion detection and inhibition as well as the self-healing of mechanical damage, into coatings. This paper presents technical details on the characterization of inhibitor-containing particles and their corrosion inhibitive effects using electrochemical and mass loss methods. Three organic environmentally friendly corrosion inhibitors were encapsulated in organic microparticles that are compatible with desired coatings. The release of the inhibitors from the microparticles in basic solution was studied. Fast release, for immediate corrosion protection, as well as long-term release for continued protection, was observed. The inhibition efficacy of the inhibitors, incorporated directly and in microparticles, on carbon steel was evaluated. Polarization curves and mass loss measurements showed that, in the case of 2MBT, its corrosion inhibition effectiveness was greater when it was delivered from microparticles.

Gender sensitive education in watershed management to support environmental friendly city

Science.gov (United States)

Asteria, D.; Budidarmono; Herdiansyah, H.; Ni’mah, N. L.

2018-03-01

This study is about gender-sensitive perspective in watershed management education program as one of capacity building for citizens in watershed management with community-based strategy to support environmental friendly cities and security for women from flood disasters. Involving women and increasing women’s active participation in sustainable watershed management is essential in urban area. In global warming and climate change situations, city management should be integrated between social aspect and environmental planning. This study used mix method (concurrent embedded type, with quantitative as primary method) with research type is descriptive-explanatory. The result of this study is education strategies with gender approaches and affirmative action through emancipation approach and local knowledge from women’s experiences can increase women’s participation. Women’s empowerment efforts need integrated intervention and collaboration from government, NGO, and other stakeholders to optimize women’s role in watershed management for support environmental friendly city. The implication of this study is an educational strategy on watershed conservation with gender perspective to offer social engineering alternatives for decision makers to policy of sustainable watershed management in urban area related to flood mitigation efforts.

Comparison of the microbiological quality of environmentally friendly and conventionally grown vegetables sold at retail markets in Korea.

Science.gov (United States)

Ryu, Jee-Hoon; Kim, Minju; Kim, Eun-Gyeong; Beuchat, Larry R; Kim, Hoikyung

2014-09-01

Fresh produce is usually eaten raw without cooking or heating, which may increase the probability of foodborne infection. The microbiological quality of 11 types of fresh, raw vegetables (romaine lettuce, sesame leaves, crown daisy, garlic chives, iceberg lettuce, cabbage, broccoli, leek, chili pepper, capsicum, and zucchini) purchased at retail markets in Iksan, Korea as affected by cultivation method (environmentally friendly vegetables [organic, pesticide-free, and low-pesticide vegetables] and conventionally grown vegetables) and harvest season was determined. Escherichia coli O157:H7 and Salmonella were not detected in all samples of vegetables tested. Aerobic mesophiles (>6 log cfu/g) were detected in environmentally friendly romaine lettuce and crown daisy and environmentally friendly and conventionally grown garlic chives, which also contained coliforms (>3 log cfu/g). Sesame leaf and crown daisy (regardless of cultivation method), as well as conventionally grown romaine lettuce and leek, contained >1 log cfu/g of E. coli. The overall microbiological quality of environmentally friendly and conventionally grown vegetables was not significantly different (P > 0.05). However, there were seasonal effects on populations of coliforms and generic E. coli on vegetables. The greatest numbers of microorganisms were isolated from environmentally friendly or conventionally grown vegetables purchased in winter. The vegetables, regardless of cultivation method or season, should be subjected to appropriate antimicrobial treatment to enhance their microbial safety. © 2014 Institute of Food Technologists®

Environmentally friendly joining of tubes by their ends

DEFF Research Database (Denmark)

Silva, Carlos M.A.; Nielsen, Chris Valentin; Alves, Luis M.

2015-01-01

This paper proposes an environmentally friendly joining process for connecting tubes by their ends that has the potential to replace current solutions based on fastened, crimped, welded, brazed or adhesive bonded joints. The process is based on a new type of tubular lap joint produced by local...... of deformation and the process feasibility window, and destructive testing to establish the working limits of tubular lap joints under different type of loading conditions. Results demonstrate that the proposed joining process is a flexible and cost-effective technology for connecting tubes by their ends...

Environmentally friendly procedure based on VA-MSPD for the determination of booster biocides in fish tissue.

Science.gov (United States)

Vieira, Augusto A; Caldas, Sergiane S; Escarrone, Ana Laura Venquiaruti; Arias, Jean Lucas de Oliveira; Primel, Ednei Gilberto

2018-03-01

Booster biocides have been widely applied to ships and other submerged structures. These compounds can be released into the marine environment as the result of vessel hull leaching and may remain in different environmental compartments. This study aimed at introducing an environmentally friendly procedure for the extraction of irgarol and diuron from fish samples by vortex-assisted matrix solid phase dispersion (VA-MSPD) with detection by liquid chromatography tandem mass spectrometry. Different types of solid supports and solvents were evaluated. The best results were found when 0.5g mussel shell, 0.5g sodium sulfate and 5mL ethanol were used. Analytical recoveries ranged from 81 to 110%, with RSD below 10%, whereas the matrix effect was between -17 and 1% (for all samples under study). LOQ values of irgarol and diuron were 5 and 50ngg -1 , respectively. The method under investigation proved to be a promising alternative to controlling contamination of fish by booster biocides, with low consumption of biodegradable reagents. Copyright © 2017 Elsevier Ltd. All rights reserved.

Field Testing of Environmentally Friendly Drilling System

Energy Technology Data Exchange (ETDEWEB)

David Burnett

2009-05-31

The Environmentally Friendly Drilling (EFD) program addresses new low-impact technology that reduces the footprint of drilling activities, integrates light weight drilling rigs with reduced emission engine packages, addresses on-site waste management, optimizes the systems to fit the needs of a specific development sites and provides stewardship of the environment. In addition, the program includes industry, the public, environmental organizations, and elected officials in a collaboration that addresses concerns on development of unconventional natural gas resources in environmentally sensitive areas. The EFD program provides the fundamentals to result in greater access, reasonable regulatory controls, lower development cost and reduction of the environmental footprint associated with operations for unconventional natural gas. Industry Sponsors have supported the program with significant financial and technical support. This final report compendium is organized into segments corresponding directly with the DOE approved scope of work for the term 2005-2009 (10 Sections). Each specific project is defined by (a) its goals, (b) its deliverable, and (c) its future direction. A web site has been established that contains all of these detailed engineering reports produced with their efforts. The goals of the project are to (1) identify critical enabling technologies for a prototype low-impact drilling system, (2) test the prototype systems in field laboratories, and (3) demonstrate the advanced technology to show how these practices would benefit the environment.

Cross-Cultural Investigation of Consumers’ Generations Attitudes Towards Purchase of Environmentally Friendly Products in Apparel Retail

Directory of Open Access Journals (Sweden)

Dabija Dan-Cristian

2017-12-01

Full Text Available Recent changes of the environment and in the society have altered consumers’ preferences and brought new concerns among local communities regarding environmental protection and organizations responsibility, the adoption of environmentally friendly strategies, as well as offering more sustainable products. Consumers tend to select retailers based on their focus on environmental friendly products and on various “green” strategies regarding waste disposal, package recycling, etc. This study aims to highlight Romanian and Slovak consumers’ attitudes towards purchasing of goods from retailers that strive a clear focus on environmental responsibility and environmental friendly practices in apparel, footwear and sportswear retail. By means of a quantitative research based on a questionnaire administered to consumers of international retail chains with operations in both countries, the authors highlight differences in their perceptions and attitudes for buying green apparel, footwear and sportswear. Whereas Millennials and Gen Xers consumers in Romania and Slovakia believe that international apparel, footwear and sportswear retailers are less concerned about environmentally responsible behavior and the need of selling green products, Baby Boomers are more sensitive to such aspects and carefully select retailers according to their green strategy. This research provides specific findings about attitudes of different consumers’ generations within two emerging European countries (Romania, Slovakia.

Environmental friendly anodizing of AZ91D magnesium alloy in alkaline borate-benzoate electrolyte

Energy Technology Data Exchange (ETDEWEB)

Liu Yan [Department of Chemistry, Zhejiang University, Hangzhou 310027 (China); Department of Chemistry, Tianshui Normal University, Tianshui 741000 (China); Wei Zhongling [Magnesium Technology Co., Ltd., Chinese Academy of Sciences, Jiaxing 314051 (China); Yang Fuwei [Department of Chemistry, Tianshui Normal University, Tianshui 741000 (China); Zhang Zhao, E-mail: eaglezzy@zjuem.zju.edu.cn [Department of Chemistry, Zhejiang University, Hangzhou 310027 (China); Key Laboratory for Light Alloy Materials Technology, Jiaxing 314051 (China)

2011-06-02

Highlights: > Environmental friendly PEO technology for AZ91 magnesium alloy is developed. > NaBz is used as new additive and it is low-cost and environmental friendly. > The effect of NaBz additive on the properties of the anodized film was studied. > Anodized film with excellent corrosion resistance is obtained. > The forming mechanism of anodized film in the presence of NaBz is approached. - Abstract: A kind of environmental friendly anodizing routine for AZ91D magnesium alloy, based on an alkaline borate-sodium benzoate electrolyte (NaBz) was studied. The effect of NaBz on the properties of the anodized film was investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectrometry (EDS), potentiodynamic polarization and electrochemical impedance spectroscopy (EIS), respectively. The results showed that the anodizing process, surface morphology, thickness, phase structure and corrosion resistance of the anodized film were strongly dependent on the concentration of NaBz. In the presence of adequate NaBz, a thick, compact and smoothing anodized film with excellent corrosion resistance was produced. Moreover, the forming mechanism of the anodized film in the presence of NaBz additive was also approached, which was a suppression of arc discharge process by the adsorption of Bz{sup -} on the surface of magnesium alloy substrate.

Analysis of Environmental Friendly Library Based on the Satisfaction and Service Quality: study at Library “X”

Science.gov (United States)

Herdiansyah, Herdis; Satriya Utama, Andre; Safruddin; Hidayat, Heri; Gema Zuliana Irawan, Angga; Immanuel Tjandra Muliawan, R.; Mutia Pratiwi, Diana

2017-10-01

One of the factor that influenced the development of science is the existence of the library, which in this case is the college libraries. Library, which is located in the college environment, aims to supply collections of literatures to support research activities as well as educational for students of the college. Conceptually, every library now starts to practice environmental principles. For example, “X” library as a central library claims to be an environmental friendly library for practicing environmental friendly management, but the X library has not inserted the satisfaction and service aspect to the users, including whether it is true that environmental friendly process is perceived by library users. Satisfaction can be seen from the comparison between expectations and reality of library users. This paper analyzes the level of library user satisfaction with library services in the campus area and the gap between expectations and reality felt by the library users. The result of the research shows that there is a disparity between the hope of library management, which is sustainable and environmentally friendly with the reality in the management of the library, so that it has not given satisfaction to the users yet. The gap value of satisfaction that has the biggest difference is in the library collection with the value of 1.57; while for the smallest gap value is in the same service to all students with a value of 0.67.

Aqueous hybrid ion batteries - An environmentally friendly alternative for stationary energy storage?

Science.gov (United States)

Peters, Jens F.; Weil, Marcel

2017-10-01

Aqueous hybrid ion batteries (AHIB) are being promoted as an environmentally friendly alternative to existing stationary battery technologies. However, no quantification of their potential environmental impacts has yet been done. This paper presents a prospective life cycle assessment of an AHIB module and compares its performance with lithium-ion and sodium-ion batteries in two different stationary energy storage applications. The findings show that the claim of being an environmentally friendly technology can only be supported with some major limitations. While the AHIB uses abundant and non-toxic materials, it has a very low energy density and requires increased amounts of material for providing a given storage capacity. Per kWh of battery, results comparable to those of the alternative lithium- or sodium-ion batteries are obtained, but significantly higher impacts under global warming and ozone depletion aspects. The comparable high cycle life of the AHIB compensates this partially, requiring less battery replacements over the lifetime of the application. On the other hand, its internal inefficiencies are higher, what becomes the dominating factor when charging majorly fossil based electricity, making AHIB unattractive for this type of applications.

Does environmental archaeology need an ethical promise?

DEFF Research Database (Denmark)

Riede, Felix; Andersen, Per; Price, Neil

2016-01-01

formalized ethical codes or promises that not only guide the dissemination of data but oblige scientists to relate to fundamentally political issues. This article couples a survey of the recent environmental ethics literature with two case studies of how past natural hazards have affected vulnerable...... societies in Europe?s prehistory. We ask whether cases of past calamities and their societal effects should play a greater role in public debates and whether archaeologists working with past environmental hazards should be more outspoken in their ethical considerations. We offer no firm answers, but suggest...... that archaeologists engage with debates in human?environment relations at this interface between politics, public affairs and science....

Environmental friendly anodizing of AZ91D magnesium alloy in alkaline borate-benzoate electrolyte

International Nuclear Information System (INIS)

Liu Yan; Wei Zhongling; Yang Fuwei; Zhang Zhao

2011-01-01

Highlights: → Environmental friendly PEO technology for AZ91 magnesium alloy is developed. → NaBz is used as new additive and it is low-cost and environmental friendly. → The effect of NaBz additive on the properties of the anodized film was studied. → Anodized film with excellent corrosion resistance is obtained. → The forming mechanism of anodized film in the presence of NaBz is approached. - Abstract: A kind of environmental friendly anodizing routine for AZ91D magnesium alloy, based on an alkaline borate-sodium benzoate electrolyte (NaBz) was studied. The effect of NaBz on the properties of the anodized film was investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectrometry (EDS), potentiodynamic polarization and electrochemical impedance spectroscopy (EIS), respectively. The results showed that the anodizing process, surface morphology, thickness, phase structure and corrosion resistance of the anodized film were strongly dependent on the concentration of NaBz. In the presence of adequate NaBz, a thick, compact and smoothing anodized film with excellent corrosion resistance was produced. Moreover, the forming mechanism of the anodized film in the presence of NaBz additive was also approached, which was a suppression of arc discharge process by the adsorption of Bz - on the surface of magnesium alloy substrate.

Use of natural gas, methanol, and ethanol fuel emulsions as environmentally friendly energy carriers for mobile heat power plants

Science.gov (United States)

Likhanov, V. A.; Lopatin, O. P.

2017-12-01

The need for using environmentally friendly energy carriers for mobile heat power plants (HPPs) is grounded. Ecologically friendly sources of energy, such as natural gas as well as renewable methyl and ethyl alcohols, are investigated. In order to develop, determine, and optimize the composition of environmentally friendly energy carriers for an HPP, the latter has been tested when working on diesel fuel (DF), compressed natural gas (CNG), and methanol and ethanol fuel emulsions (MFE, EFE). It has been experimentally established that, for the application of environmentally friendly energy carriers for a 4Ch 11.0/12.5 diesel engine of a mobile fuel and power plant, it is necessary to maintain the following ratio of components when working on CNG: 80% gas and 20% DF primer portion. When working on an alcohol mixture, emulsions of the following composition were used: 25% alcohol (methanol or ethanol), 0.5% detergent-dispersant additive succinimide C-5A, 7% water, and 67.5% DF. When this diesel passed from oil DF to environmentally friendly energy sources, it allowed for the reduction of the content of exhaust gases (EG) (1) when working on CNG with recirculation of exhaust gases (EGR) (recirculation was used to eliminate the increased amount of nitric oxides by using CNG): carbon black by 5.8 times, carbon dioxide by 45.9%, and carbon monoxide by 23.8%; (2) when working on MFE: carbon black by 6.4 times, nitrogen oxides by 29.6%, carbon dioxide by 10.1%, and carbon oxide by 47.6%; (3) when working on EFE: carbon black by 4.8 times; nitrogen oxides by 40.3%, carbon dioxide by 26.6%, and carbon monoxide by 28.6%. The prospects of use of environmentally friendly energy carriers in diesels of mobile HPPs, such as natural gas, ethanol, and methanol, has been determined.

Clean and Selective Catalytic C-H alkylation of Alkenes with Environmental friendly Alcohols

KAUST Repository

Poater, Albert; Vummaleti, Sai V. C.; Polo, Alfonso; Cavallo, Luigi

2016-01-01

Bearing the alkylation of alkene substrates using alcohol as solvent, catalysed by the cationic Ru-based catalyst [(C6H6)(PCy3)(CO)RuH]+, DFT calculations have been carried out to get mechanistic insights of such an environmental friendly reaction

Incentives for environmentally friendly vehicles. A report from the Environment and Health Protection Administration in Stockholm

Energy Technology Data Exchange (ETDEWEB)

Henriksson, Cecilia; Paedam, S. [Inregia AB, Stockholm (Sweden)

1999-11-01

This report deals with incentives for environmentally friendly vehicles. The report includes a description of the current status of these vehicles in Sweden, Stockholm County Council, and the City of Stockholm. A forecast of possible development of zero and low emission vehicles is carried out. The major obstacles which currently hinder a market for these vehicles are noted. In order to determine market readiness and factors which affect these firms' purchase of vehicles, interviews were carried out with private firms. This analysis indicates that institutional barriers in Sweden hinder zero and low emission vehicles, with laws and tax policies which offer conflicting signals. To follow international developments, these obstacles must be reduced. Therefore, it is important that Stockholm works to create a positive climate for environmentally friendly vehicles. This means that it is important that the policies recommended in this report are implemented with adequate intensity. Because knowledge about zero and low emission vehicles is limited, there is a need to produce factual information. Information can be spread to a larger group, but it is more cost effective to reach a group which is most likely to accept environmentally friendly vehicles. This could include companies with environmental profiles, or those who drive and use company cars. To increase the effectiveness of this information campaign, we suggest that the City also maintain a demonstration fleet with loaner cars for companies who wish to test these vehicles in daily operation before deciding whether or not to purchase them. The incentive package recommended for Stockholm includes offering parking rebates to various groups who park in the city centre; residents , commercial vehicles, and temporary visitors. For equity reasons, all groups should in practice be offered the rebate. To increase the positive effect of the incentive, environmentally friendly vehicles should also be allowed to drive in

Melon oil methyl ester: an environmentally friendly fuel

Directory of Open Access Journals (Sweden)

S.K. Fasogbon

2015-06-01

Full Text Available Demand for energy is growing across the globe due to the direct relationship between the well-being and prosperity of people and energy usage. However, meeting this growing energy demand in a safe and environmentally friendly manner is a key challenge. To this end, methyl esters (biodiesels have been and are being widely investigated as alternatives to fossil fuels in compression ignition engines. In this study, melon (Colocynthis Citrullus Lanatus oil was used to synthesize biodiesel (methyl ester using the transesterification method in the presence of a sodium hydroxide promoter. The emissions profile of the biodiesel was investigated by setting up a single-cylinder four-stroke air-cooled CI engine connected to a TD115-hydraulic dynamometer and an Eclipse Flue Gas Analyzer (FGA with model number EGA4 flue gas analyzer. The engine was run at engine speeds of 675, 1200 and 1900rpm for biodiesel/diesel blends at 21°C on a volume basis of 0/100(B0, 10/90(B10, 20/80(B20, 30/70(B30, 40/60(B40 and 50/50(B50. The test showed a downward trend in the emissions profile of the biodiesel, with remarkable reductions of about 55% in the dangerous-carbon monoxide exhaust gas pollutant and 33.3% in the unfriendly SOX from 100% diesel to B30-biodiesel concentration. Increasing the speed from 675 to 1200 and then to 1900 rpm also afforded further reductions in CO and SOX exhaust emissions. NOX however increased marginally by 2.1% from the same 100% diesel to the B30-biodiesel composition. Based on the remarkable reduction in CO and SOX and the marginal increase in NOX as the concentration of the biodiesel increased in the blends, the study concludes that melon oil methyl ester is an environmentally friendly fuel.

Aging in Context: Individual and Environmental Pathways to Aging-Friendly Communities-The 2015 Matthew A. Pollack Award Lecture.

Science.gov (United States)

Scharlach, Andrew E

2017-08-01

Reflecting the theme of the 2015 Gerontological Society of America (GSA) Annual Scientific Meeting, "Aging as a Lifelong Process," this paper examines intersections between aging processes and their environmental context, develops theory regarding constructive developmental processes and their environmental context, and considers potential implications for conceptualizing and creating aging-friendly communities. The first section examines the primary goals of aging-friendly communities, that is, promoting elder well-being. The second section explores the role of environmental pathways in fostering well-being throughout the lifecourse. The third section presents a new Process Model of Constructive Aging that identifies key developmental processes at the intersection of individual and environmental pathways. The final section considers potential implications for creating aging-friendly communities, including ways in which cities and towns can promote the ability of community members to live fully throughout their lives, and identifies some key conceptual and empirical challenges affecting the future of the field. © The Author 2017. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Decision-Making Tool for Cost-Efficient and Environmentally Friendly Wood Mobilisation

OpenAIRE

Matevž Triplat; Peter Prislan; Nike Krajnc

2015-01-01

Background and Purpose: With development of forest management technologies, the efficiency of wood production was significantly improved, and thus the impact on forests has changed as well. The article presents a practical decision-making tool for selection of most suitable harvesting system, considering given terrain as well as expected soil conditions on harvesting sites. The decision-making tool should support cost-efficient and environmentally friendly mobilisation of wood. Materials a...

Environmentally friendly use of non-coal ashes in Sweden.

Science.gov (United States)

Ribbing, C

2007-01-01

The Swedish Thermal Engineering Research Institute (Värmeforsk) initiated an applied research program "Environmentally friendly use of non-coal ashes", in 2002. The program aims at increasing knowledge on the by-products of energy production and their application. The goal of formulating technical and environmental guidelines and assessments is a major point of the program, which is supported by about forty authorities and private organisations. The programme has been divided into four areas: recycling of ashes to forests, geotechnical applications, use in landfilling, and environmental aspects and chemistry. Among all results obtained, the following progress is shown: *Evidence for the positive effects of spreading ashes on forest growth. *A proposal for environmental guidelines on the utilisation of ashes in construction. *A handbook for using non-coal fly ashes in unpaved roads. *Technical and environmental assessments of MSWI bottom ashes in road construction. *Development of the use of ashes with municipal wastewater sludge as a cover for landfills and mine tailings. *Use of ashes from bio-fuels in concrete and replacement of cement in stoop mining. *A method to classify those by-products from combustion that have mirror entries in the EWC as a hazardous or non-hazardous compound. The Ash Programme has also made it possible to increase knowledge on ashes as valuable materials, on quality assurance and on markets for recovered materials.

Replacement of petroleum based hydraulic fluids with renewable and environmental friendly resource

International Nuclear Information System (INIS)

Wan Sani Wan Nik; Noraini Ali

2000-01-01

Rational self-interest and good environmental citizenship are forcing the development of renewable and environmentally acceptable hydraulic fluids. Fluids that are at least equivalent in performance plus biodegradable have been formulated in Europe and USA using vegetable oils as base stocks for innovative additive packages. While many of the differences in using vegetable based stocks in place of mineral oils have been adapted to by straightforward formulating changes, the oxidation stability of vegetable-based stock is still a challenging area. This work initiates the investigation in Malaysia in the use of environmentally friendly resource to replace partially the petroleum based hydraulic fluid. The study concentrates more in improving the oxidation stability of the vegetable based stocks. (Author)

Radioecological implementation of 'environmental friendly' materials alumosilicate origin

International Nuclear Information System (INIS)

Stojanovic, M.; Milojkovic, J.; Grubisic, M.; Iles, D.

2009-01-01

The problem of modern civilization is radionuclide contamination of soil, especially in Serbia.There was NATO aggression when were used munitions with depleted uranium, and after that waste material was deposed on the inhabited and mostly fertile soil. Having in mind that not all activities have been taken that would permanently eliminate the consequences of this radionuclide, means that entering depleted uranium in the food chain is a real danger now. Solving this problem requires a holistic approach including the application of safe and effective 'environmental friendly' materials that are economical, locally available and easily applicable. Our investigations have included testing the efficiency of natural and modified with domestic origin aluminosilicate materials, zeolite, phosphate, bentonite and diatomite for in situ remediation of soil. (author) [sr

Characterization of Encapsulated Corrosion Inhibitors Containing Microparticles for Environmentally Friendly Smart Coatings

Science.gov (United States)

Pearman, Benjamin Pieter; Calle, Luz M.

2015-01-01

This poster presents the results obtained from experiments designed to evaluate the release properties, as well as the corrosion inhibition effectiveness, of several encapsulated corrosion inhibitors. Microencapsulation has been used in the development of environmentally friendly multifunctional smart coatings. This technique enables the incorporation of autonomous corrosion detection, inhibition and self-healing functionalities into many commercially available coating systems. Select environmentally friendly corrosion inhibitors were encapsulated in organic and inorganic pH-sensitive microparticles and their release in basic solutions was studied. The release rate results showed that the encapsulation can be tailored from fast, for immediate corrosion protection, to slow, which will provide continued long-term corrosion protection. The incorporation of several corrosion inhibitor release profiles into a coating provides effective corrosion protection properties. To investigate the corrosion inhibition efficiency of the encapsulated inhibitors, electrochemical techniques were used to obtain corrosion potential, polarization curve and polarization resistance data. These measurements were performed using the free as well as the encapsulated inhibitors singly or in combinations. Results from these electrochemical tests will be compared to those obtained from weight loss and other accelerated corrosion experiments.

Extrusion: An environmentally friendly process for PEMFC membrane elaboration

Energy Technology Data Exchange (ETDEWEB)

Sanchez, J.-Y.; Iojoiu, C.; Marechal, M. [LEPMI, UMR 5631 CNRS-INPG-UJF, ENSEEG, BP 75, F-38402, Saint Martin d' Heres (France); Chabert, F.; El Kissi, N. [Rheologie, UMR 5520 CNRS-INPG-UJF, ENSHMG, BP 53, F-38041, Grenoble (France); Salomon, J.; Mercier, R. [LMOPS UMR CNRS 5041, BP 24, F-69390 Vernaison (France); Piffard, Y. [CNRS Universite de Nantes, Institut des Materiaux Jean Rouxel, UMR 6502, BP 32229, F-44322, Nantes Cedex 3 (France); Galiano, H. [CEA, Le Ripault Research Center, BP 16, F-37260, Monts (France)

2007-12-31

The paper deals with the use of extrusion to process PEMFC filled and unfilled membranes. Several routes including the sulfonation of filled and unfilled extruded membranes and the extrusion of filled and unfilled ionomers are reported. Thanks to the use of selected water-soluble aid process plasticizers, acid and alkaline forms of sulfonated polyethersulfone were, for the first time, successfully extruded. The extrusion process did not lead to any degradation of the ionomer performances. Decreasing the membrane cost while using environmentally friendly elaboration conditions, it should be helpful to an industrial production. In addition, avoiding filler sedimentation it should allow homogeneous composite membranes to be obtained. (author)

Evaluation of environmentally friendly products for control of fungal diseases of grapes

OpenAIRE

Schilder, A.M.C.; Gillett, J.M.; Sysak, R.W.; Wise, J.C.

2002-01-01

Various environmentally friendly products were tested for efficacy in controlling powdery mildew, downy mildew, black rot, Phomopsis, and Botrytis bunch rot in grapes over several years. The products tested were: JMS stylet oil (paraffinic oil), Serenade (Bacillus subtilis), Croplife (citrus and coconut extract) + Plant food (foliar fertilizer), Armicarb (potassium bicarbonate), Elexa (chitosan), Milsana (giant knotweed extract), and AQ10 (Ampelomyces quisqua/is). JMS Stylet Oil, Armicarb, Se...

Possible consequences of changing to a more environmental-friendly steel production in China

International Nuclear Information System (INIS)

Kolstad, Julie Riise

2005-01-01

China is the world's biggest steel producer, the world's biggest steel consumer and the world's biggest polluter. The superpower is forced to change its steel production in a more environmental-friendly way, but necessary measures will be expensive; moreover, they will have consequences far past China's borders. The possible effects are elaborated in the article (ml)

Development of a method for environmentally friendly chemical peptide synthesis in water using water-dispersible amino acid nanoparticles

Directory of Open Access Journals (Sweden)

Fukumori Yoshinobu

2011-08-01

Full Text Available Abstract Due to the vast importance of peptides in biological processes, there is an escalating need for synthetic peptides to be used in a wide variety of applications. However, the consumption of organic solvent is extremely large in chemical peptide syntheses because of the multiple condensation steps in organic solvents. That is, the current synthesis method is not environmentally friendly. From the viewpoint of green sustainable chemistry, we focused on developing an organic solvent-free synthetic method using water, an environmentally friendly solvent. Here we described in-water synthesis technology using water-dispersible protected amino acids.

Benevolent technotopias and hitherto unimaginable meats: Tracing the promises of in vitro meat

OpenAIRE

Jönsson, Erik

2016-01-01

Today, in vitro (Latin: in glass) meat researchers strive to overhaul meat production technologies by producing meat outside animal bodies, primarily by culturing cells. In the process, meat should become healthier, more environmentally friendly and kinder to animals. In this article, I scrutinize (and problematize) this promissory discourse by examining the world that proponents envision alongside the world from which promises emerge. First, I trace the increasing number of publications stri...

Corrosion-Activated Micro-Containers for Environmentally Friendly Corrosion Protective Coatings

Science.gov (United States)

Li, Wenyan; Buhrow, J. W.; Zhang, X.; Johnsey, M. N.; Pearman, B. P.; Jolley, S. T.; Calle, L. M.

2016-01-01

This work concerns the development of environmentally friendly encapsulation technology, specifically designed to incorporate corrosion indicators, inhibitors, and self-healing agents into a coating, in such a way that the delivery of the indicators and inhibitors is triggered by the corrosion process, and the delivery of self-healing agents is triggered by mechanical damage to the coating. Encapsulation of the active corrosion control ingredients allows the incorporation of desired autonomous corrosion control functions such as: early corrosion detection, hidden corrosion detection, corrosion inhibition, and self-healing of mechanical damage into a coating. The technology offers the versatility needed to include one or several corrosion control functions into the same coating.The development of the encapsulation technology has progressed from the initial proof-of-concept work, in which a corrosion indicator was encapsulated into an oil-core (hydrophobic) microcapsule and shown to be delivered autonomously, under simulated corrosion conditions, to a sophisticated portfolio of micro carriers (organic, inorganic, and hybrid) that can be used to deliver a wide range of active corrosion ingredients at a rate that can be adjusted to offer immediate as well as long-term corrosion control. The micro carriers have been incorporated into different coating formulas to test and optimize the autonomous corrosion detection, inhibition, and self-healing functions of the coatings. This paper provides an overview of progress made to date and highlights recent technical developments, such as improved corrosion detection sensitivity, inhibitor test results in various types of coatings, and highly effective self-healing coatings based on green chemistry. The NASA Kennedy Space Centers Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion

New environmentally-friendly antimicrobials and biocides from Andean and Mexican biodiversity.

Science.gov (United States)

Cespedes, Carlos L; Alarcon, Julio; Aqueveque, Pedro M; Lobo, Tatiana; Becerra, Julio; Balbontin, Cristian; Avila, Jose G; Kubo, Isao; Seigler, David S

2015-10-01

Persistent application of pesticides often leads to accumulation in the environment and to the development of resistance in various organisms. These chemicals frequently degrade slowly and have the potential to bio-accumulate across the food chain and in top predators. Cancer and neuronal damage at genomic and proteomic levels have been linked to exposure to pesticides in humans. These negative effects encourage search for new sources of biopesticides that are more "environmentally-friendly" to the environment and human health. Many plant or fungal compounds have significant biological activity associated with the presence of secondary metabolites. Plant biotechnology and new molecular methods offer ways to understand regulation and to improve production of secondary metabolites of interest. Naturally occurring crop protection chemicals offer new approaches for pest management by providing new sources of biologically active natural products with biodegradability, low mammalian toxicity and environmentally-friendly qualities. Latin America is one of the world's most biodiverse regions and provide a previously unsuspected reservoir of new and potentially useful molecules. Phytochemicals from a number of families of plants and fungi from the southern Andes and from Mexico have now been evaluated. Andean basidiomycetes are also a great source of scientifically new compounds that are interesting and potentially useful. Use of biopesticides is an important component of integrated pest management (IPM) and can improve the risks and benefits of production of many crops all over the world. Copyright © 2015 Elsevier Inc. All rights reserved.

Development of environmentally friendly universal controller. Data and materials; 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho. Shiryohen

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Research and development was carried out for an 'environmentally friendly universal controller (UC)' which would be 'user-friendly and energy-saving' when used with electrical home appliances, and data and materials on them were compiled into this volume. It covers the specifications (Versions 0.6 and 0.51) of a newly developed two-way controller protocol, the specification (Version 0.1) of two-way remote control IrDA-C communication unit hardware, an infrared communication protocol IrDa Control, and the like. It also accommodates information collected through surveys of technological trends as reflected in technical literature, Internet home pages, catalogs, and the like, concerning the user-friendliness of electrical home appliances, remote control, domestic consumption of electric power, and the like. Also covered is the result of surveys of patents involving environmentally friendly UC related technologies, namely, Japanese patents (from applications made in 1979 through disclosures made in 1998) and U.S. patents (registrations made in 1982 and thereafter). Furthermore, it contains the result of surveys of actualities of domestic use conducted for the purpose of clarifying the effect of environmentally friendly UC introduction, how such UCs are being accepted by the public, and the conditions that should be satisfied for their popularization. (NEDO)

Development of environmentally friendly universal controller. Data and materials; 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho. Shiryohen

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Research and development was carried out for an 'environmentally friendly universal controller (UC)' which would be 'user-friendly and energy-saving' when used with electrical home appliances, and data and materials on them were compiled into this volume. It covers the specifications (Versions 0.6 and 0.51) of a newly developed two-way controller protocol, the specification (Version 0.1) of two-way remote control IrDA-C communication unit hardware, an infrared communication protocol IrDa Control, and the like. It also accommodates information collected through surveys of technological trends as reflected in technical literature, Internet home pages, catalogs, and the like, concerning the user-friendliness of electrical home appliances, remote control, domestic consumption of electric power, and the like. Also covered is the result of surveys of patents involving environmentally friendly UC related technologies, namely, Japanese patents (from applications made in 1979 through disclosures made in 1998) and U.S. patents (registrations made in 1982 and thereafter). Furthermore, it contains the result of surveys of actualities of domestic use conducted for the purpose of clarifying the effect of environmentally friendly UC introduction, how such UCs are being accepted by the public, and the conditions that should be satisfied for their popularization. (NEDO)

Environmentally friendly disinfectant: Production, disinfectant action and efficiency

Directory of Open Access Journals (Sweden)

Čekerevac Milan I.

2006-01-01

Full Text Available Silver is a known disinfectant from ancient times, and it has been widely used for various purposes: for food and water disinfection, curing of wounds and as a universal antibiotic for a wide spectrum of diseases - until the Second World War and the discovery of penicillin. Until recently, it was assumed that silver, being a heavy metal, was toxic for humans and living beings. However, the newest research provides facts that the usage of silver, even for drinking water disinfection, is benign if it is added in small concentrations (in parts per billion. It has been shown in the newer scientific and technical literature that silver in colloidal form is a powerful (secondary disinfectant for drinking water, that it can be effectively used for the disinfection of water containers including swimming pools, installations in food industry, medicine, etc. Particularly, it has been shown that colloidal silver combined with hydrogen peroxide shows synergism having strong bactericidal and antiviral effects. The combination can be successfully used as a disinfectant in agriculture, food production and medicine. The original electrochemical process of production, the mechanism of physical-chemical reactions in that process and the mechanism of the antiseptic affect of the environmentally friendly disinfectant, based on the synergism of colloidal silver and hydrogen peroxide and the activity of electrochemically activated water, is shown. The starting solution was anolyte, obtained in electrochemical activation by water electrolysis of a highly diluted solution of K-tartarate in demineralized water (5.5-1CT4 M. The problem of electrolysis of very dilute aqueous solutions in membrane cells was particularly treated. It was shown that the efficiency of the electrolysis depends on the competition between the two processes: the rates of the processes of hydrogen and oxygen generation at the electrodes and the process of diffusion of hydrogen and hydroxyl ions

Graphene oxide-loaded shortening as an environmentally friendly heat transfer fluid with high thermal conductivity

Directory of Open Access Journals (Sweden)

Vongsetskul Thammasit

2017-01-01

Full Text Available Graphene oxide-loaded shortening (GOS, an environmentally friendly heat transfer fluid with high thermal conductivity, was successfully prepared by mixing graphene oxide (GO with a shortening. Scanning electron microscopy revealed that GO particles, prepared by the modified Hummer’s method, dispersed well in the shortening. In addition, the latent heat of GOS decreased while their viscosity and thermal conductivity increased with increasing the amount of loaded GO. The thermal conductivity of the GOS with 4% GO was higher than that of pure shortening of ca. three times, from 0.1751 to 0.6022 W/mK, and increased with increasing temperature. The GOS started to be degraded at ca. 360°C. After being heated and cooled at 100°C for 100 cycles, its viscosity slightly decreased and no chemical degradation was observed. Therefore, the prepared GOS is potentially used as environmentally friendly heat transfer fluid at high temperature.

Achievement report for fiscal 1998. Development of environmentally friendly universal controller; 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Research and development was carried out for an 'environmentally friendly universal controller (UC)' which would be 'user-friendly and energy-saving' when used with electrical home appliances. An environmentally friendly UC is a remote controller which utilizes an infrared two-way communication function and becomes capable of dealing with any appliance upon downloading remote control information from the appliance involved. Studies were conducted for the development of controller hardware and software therefor and for the development of electrical home appliances to correspond to their specifications. In relation with energy conservation, studies centered about reduction in power consumption while on standby and unnecessary power consumption. As the result, an environmentally friendly UC protocol was newly developed and, based on the protocol, plural numbers of controllers, appliances, and network gateways were tentatively fabricated, and were examined for their function, behavior, and operational interchangeability. Systems aiming at reducing power consumption while on standby and unnecessary power consumption were built by way of experiment, and were checked for performance. It was then concluded that a reduction of several billion kWh might be achieved. (NEDO)

Environmentally friendly health care food services: a survey of beliefs, behaviours, and attitudes.

Science.gov (United States)

Wilson, Elisa D; Garcia, Alicia C

2011-01-01

There is increasing global interest in sustainability and the environment. A hospital/health care food service facility consumes large amounts of resources; therefore, efficiencies in operation can address sustainability. Beliefs, attitudes, and behaviours about environmentally friendly practices in hospital/health care food services were explored in this study. Questionnaires addressed environmentally friendly initiatives in building and equipment, waste management, food, and non-food procurement issues. The 68 participants included hospital food service managers, clinical dietitians, dietary aides, food technicians, and senior management. Data analysis included correlation analysis and descriptive statistics. Average scores for beliefs were high in building and equipment (90%), waste management (94%), and non-food procurement (87%), and lower in food-related initiatives (61%) such as buying locally, buying organic foods, buying sustainable fish products, and reducing animal proteins. Average positive scores for behaviours were positively correlated with beliefs (waste management, p=0.001; food, p=0.000; non-food procurement, p=0.002). Average positive scores for attitude in terms of implementing the initiatives in health care were 74% for building and equipment, 81% for waste management, 70% for non-food procurement, and 36% for food. The difference in food-related beliefs, behaviours, and attitudes suggests the need for education on environmental impacts of food choices. Research is recommended to determine facilitators and barriers to the implementation of green strategies in health care. As food experts, dietitians can lead changes in education, practice, and policy development.

Eco-friendly Development Of Industry

International Nuclear Information System (INIS)

An, Gi Cheol; Park, Hun; Lee, Dong Jin; Ryu, Sang Hui

1998-02-01

This book reports eco-friendly development of industry, which has summary on bring up the issue and research way and system of research. It deals with current state of affairs on eco-friendly development of industry and the case of developed countries such as necessity and meaning of eco-friendly development industry, prospect and change of the tendency, environmental issue by field in Korea like the steel industry, nonferrous metal industry, auto industry, and cement industry and general policy for eco-friendly development of industry.

An easy and environmentally-friendly approach to superamphiphobicity of aluminum surfaces

Science.gov (United States)

Deng, R.; Hu, Y. M.; Wang, L.; Li, Zh. H.; Shen, T.; Zhu, Y.; Xiang, J. Zh.

2017-04-01

Superamphiphobic Al surfaces were achieved via an easy and environmentally-friendly approach. Aqueous mixed solution of 0.7 M CuSO4 and 1 M NaCl was used to etch polished Al surfaces to fabricate a rough morphology distributed with microscale step-like pits. The uniformly distributed nanoscale petals covered on the microscale pits were obtained by subsequent 96 °C hot deionized water bathing for 13 min. Thus, the hierarchical micro/nanometer scale roughness was formed which provided the structural basic of superamphiphobic Al surfaces. By 1H, 1H, 2H, 2H-Perfluorodecyl-triethoxysilane (PFDTS) derivatization, desirable superamphiphobic Al surfaces were achieved with the highest static contact angles of 162° for water, 156° for peanut oil, respectively. Meanwhile, the sliding angles were lower than 10° for both water and peanut oil droplets. The as-prepared Al surfaces were investigated by field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and optical contact angle measurements. The FE-SEM images of as-prepared Al surfaces showed a hierarchical micro/nanometer scale morphology. XPS analyses demonstrated the PFDTS derivitization on Al surfaces. The superamphiphobic Al surfaces presented good mechanical durability and chemical stability which have a wide range of applications in fields such as self-cleaning, anti-icing, anti-corrosion, oil transportation, energy harvesting, microfluidics, and so forth. The approach reported in this paper may easily realize the industrial production of superamphiphobic Al surfaces owing to the advantage of facile, low cost and environmentally-friendly.

Environmentally friendly synthesis of organic-soluble silver nanoparticles for printed electronics

International Nuclear Information System (INIS)

Lee, Kwi Jong; Jun, Byung Ho; Choi, Junrak; Lee, Young Il; Joung, Jaewoo; Oh, Yong Soo

2007-01-01

In this study, we attempted to synthesize organic-soluble silver nanoparticles in the concentrated organic phase with an environmentally friendly method. The fully organic phase system contains silver acetate as a silver precursor, oleic acid as both a medium and a capping molecule, and tin acetate as a reducing agent. Monodisperse silver nanoparticles with average diameters of ca. 5 nm can be easily synthesized at large scale. Only a small usage of tin acetate ( 90%). Also, it was investigated that the residual tin atom does not exist in the synthesized silver nanoparticles. This implied that tin acetate acts as a reducing catalyst

Release Properties and Electrochemical Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

Science.gov (United States)

Pearman, B. P.; Calle, L. M.; Zhang, X.; Li, W.; Buhrow, J. W.; Johnsey, M. N.; Montgomery, E. L.; Fitzpatrick, L.; Surma, J. M.

2015-01-01

The NASA Kennedy Space Center's Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion indicators, inhibitors and self-healing agents. This allows for the incorporation of autonomous corrosion control functionalities, such as corrosion detection and inhibition as well as the self-healing of mechanical damage, into coatings. This paper presents technical details on the characterization of inhibitor-containing particles and their corrosion inhibitive effects using electrochemical and mass loss methods. Three organic environmentally friendly corrosion inhibitors were encapsulated in organic microparticles that are compatible with desired coatings. The total inhibitor content and the release of one of the inhibitors from the microparticles in basic solution was measured. Particles with inhibitor contents of up 60 wt% were synthesized. Fast release, for immediate corrosion protection, as well as long-term release for continued protection, was observed. The inhibition efficacy of the inhibitors, both as the pure materials and in microparticles, on carbon steel was evaluated. Polarization curves and mass loss measurements showed that, in the case of 2MBT, its corrosion inhibition effectiveness was greater when it was delivered from microparticles.

Dispersion stability and thermophysical properties of environmentally friendly graphite oil–based nanofluids used in machining

Directory of Open Access Journals (Sweden)

Yu Su

2016-01-01

Full Text Available As environmentally friendly cutting fluids, vegetable-based oil and ester oil are being more and more widely used in metal cutting industry. However, their cooling and lubricating properties are required to be further improved in order to meet more cooling and lubricating challenges in high-efficiency machining. Nanofluids with enhanced heat carrying and lubricating capabilities seem to give a promising solution. In this article, graphite oil–based nanofluids with LB2000 vegetable-based oil and PriEco6000 unsaturated polyol ester as base fluids were prepared by ultrasonically assisted two-step method, and their dispersion stability and thermophysical properties such as viscosity and thermal conductivity were experimentally and theoretically investigated at different ultrasonication times. The results indicate that graphite-PriEco6000 nanofluid showed better dispersion stability, higher viscosity, and thermal conductivity than graphite-LB2000 nanofluid, which made it more suitable for application in high-efficiency machining as coolant and lubricant. The theoretical classical models showed good agreement with the thermal conductivity values of graphite oil–based nanofluids measured experimentally. However, the deviation between the experimental values of viscosity and the theoretical models was relatively big. New empirical correlations were proposed for predicting the viscosity of graphite oil–based nanofluids at various ultrasonication times.

The development of environmental assessment tools to support the creation of dementia friendly care environments: Innovative practice.

Science.gov (United States)

Waller, Sarah; Masterson, Abigail; Evans, Simon C

2017-02-01

The need for more dementia friendly design in hospitals and other care settings is now widely acknowledged. Working with 26 NHS Trusts in England as part of a Department of Health commissioned programme, The King's Fund developed a set of overarching design principles and an environmental assessment tool for hospital wards in 2012. Following requests from other sectors, additional tools were developed for hospitals, care homes, health centres and housing with care. The tools have proven to be effective in both disseminating the principles of dementia friendly design and in enabling the case to be made for improvements that have a positive effect on patient outcomes and staff morale. This paper reports on the development, use and review of the environmental assessment tools, including further work that is now being taken forward by The Association for Dementia Studies, University of Worcester.

Perceived quality, perceived risk and customer trust affecting customer loyalty of environmentally friendly electronics products

Directory of Open Access Journals (Sweden)

Lalinthorn Marakanon

2017-01-01

Full Text Available At present, industrial business competition causes producers to be aware of quality, price, and variety in developing new products to meet the consumers' needs. This research reviewed the literature on green marketing and proposes a new conceptual framework of customer loyalty. It uses four constructs—perceived quality, perceived risk, customer trust, and customer loyalty—in the context of environmentally friendly electronics products in Thailand. This research employed an empirical study using the questionnaire survey method to verify the hypotheses. Data were obtained from 420 consumers who bought and used environmentally friendly electronic products, particularly mobile phones, computers, and laptops using a purposive sampling method. The data were analyzed using confirmatory factor analysis (CFA and structural equation modeling (SEM. The results showed that perceived risk and customer trust had a direct effect on customer loyalty while perceived quality had an indirect effect on customer loyalty via customer trust. Furthermore, perceived quality had direct effects on perceived risk and customer trust. The results from the final SEM model were used to confirm the proposed relationships among the variables.

Water-soluble resist for environmentally friendly lithography

Science.gov (United States)

Lin, Qinghuang; Simpson, Logan L.; Steinhaeusler, Thomas; Wilder, Michelle; Willson, C. Grant; Havard, Jennifer M.; Frechet, Jean M. J.

1996-05-01

This paper describes an 'environmentally friendly,' water castable, water developable photoresist system. The chemically amplified negative-tone resist system consists of three water-soluble components: a polymer, poly(methyl acrylamidoglycolate methyl ether), [poly(MAGME)]; a photoacid generator, dimethyl dihydroxyphenylsulfonium triflate and a crosslinker, butanediol. Poly(MAGME) was synthesized by solution free radical polymerization. In the three-component resist system, the acid generated by photolysis of the photoacid generator catalyzes the crosslinking of poly(MAGME) in the exposed regions during post-exposure baking, thus rendering the exposed regions insoluble in water. Negative tone relief images are obtained by developing with pure water. The resist is able to resolve 1 micrometer line/space features (1:1 aspect ratio) with an exposure dose of 100 mJ/cm2 at 248 nm. The resist can be used to generate etched copper relief images on printed circuit boards using aqueous sodium persulfate as the etchant. The crosslinking mechanism has been investigated by model compound studies using 13C NMR. These studies have revealed that the acid catalyzed reaction of the poly(MAGME) with butanediol proceeds via both transesterification and transacetalization (transaminalization) reactions at low temperatures, and also via transamidation at high temperatures.

Environmental and Financial Evaluation of Passenger Vehicle Technologies in Belgium

OpenAIRE

Messagie, Maarten; Lebeau, Kenneth; Coosemans, Thierry; Macharis, Cathy; Mierlo, Joeri van

2013-01-01

Vehicles with alternative drive trains are regarded as a promising substitute for conventional cars, considering the growing concern about oil depletion and the environmental impact of our transportation system. However, “clean” technologies will only be viable when they are cost-efficient. In this paper, the environmental impacts and the financial costs of different vehicle technologies are calculated for an average Belgian driver. Environmentally friendly vehicles are compared with conventi...

Eco-friendly Energy Storage System: Seawater and Ionic Liquid Electrolyte.

Science.gov (United States)

Kim, Jae-Kwang; Mueller, Franziska; Kim, Hyojin; Jeong, Sangsik; Park, Jeong-Sun; Passerini, Stefano; Kim, Youngsik

2016-01-08

As existing battery technologies struggle to meet the requirements for widespread use in the field of large-scale energy storage, novel concepts are urgently needed concerning batteries that have high energy densities, low costs, and high levels of safety. Here, a novel eco-friendly energy storage system (ESS) using seawater and an ionic liquid is proposed for the first time; this represents an intermediate system between a battery and a fuel cell, and is accordingly referred to as a hybrid rechargeable cell. Compared to conventional organic electrolytes, the ionic liquid electrolyte significantly enhances the cycle performance of the seawater hybrid rechargeable system, acting as a very stable interface layer between the Sn-C (Na storage) anode and the NASICON (Na3 Zr2 Si2 PO12) ceramic solid electrolyte, making this system extremely promising for cost-efficient and environmentally friendly large-scale energy storage. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Pricing of environmental friendly herbicides appropriate for sustainable agriculture, A case study: wheat farmers in Khorasan Razavi province

Directory of Open Access Journals (Sweden)

Mohammad Ghorbani

2016-04-01

Full Text Available Awareness of wheat farmers’ personal preferences towards environmental issues and weed types is important in pricing bioherbicides for sustainable weed management and could consequently be a fundamental guide to agricultural authorities and policy-makers. In the present study, a survey was carried out by using data collected from 180 wheat farmers of Korasan Razavi province during 2008, together with hedonic pricing method. The role of environmental qualitative factors and weed type on pricing environmental-friendly herbicides on the basis of “willingness to pay” was studied. Results from the estimation of hedonic pricing method indicated that reduction of water pollution, human health risk, farmers information about negative effects of chemical herbicides and the virtual variable of weed type had significant effects on pricing environmental friendly herbicides. Variables of soil pollution and weed perenniality had no significant effects on pricing herbicide applicable to sustainable agricultural systems. Based on the results of this study, possibilities of using bioherbicide or less pollutant herbicides and also the rate of farmers willingness to pay for alternatives in the region are important factors recommended for additional studies

Eco-friendly polymer nanocomposites processing and properties

CERN Document Server

Thakur, Vijay Kumar

2015-01-01

This book contains precisely referenced chapters, emphasizing environment-friendly polymer nanocomposites with basic fundamentals, practicality and alternatives to traditional nanocomposites through detailed reviews of different environmental friendly materials procured from different resources, their synthesis and applications using alternative green approaches. The book aims at explaining basics of eco-friendly polymer nanocomposites from different natural resources and their chemistry along with practical applications which present a future direction in the biomedical, pharmaceutical and automotive industry. The book attempts to present emerging economic and environmentally friendly polymer nanocomposites that are free from side effects studied in the traditional nanocomposites. This book is the outcome of contributions by many experts in the field from different disciplines, with various backgrounds and expertises. This book will appeal to researchers as well as students from different disciplines. The co...

Isomerization of glucose into fructose by environmentally friendly Fe/β zeolite catalysts.

Science.gov (United States)

Xu, Siquan; Zhang, Lei; Xiao, Kehao; Xia, Haian

2017-06-29

Herein, the environmentally friendly Fe/β zeolite for glucose isomerization to fructose in aqueous media was reported for the first time. The effects of various reaction conditions including reaction temperature, reaction time, catalyst dosage, etc. on the isomerization reaction over Fe/β zeolite were studied in detail. Under the optimized conditions, yield of fructose higher than 20% were obtained. Moreover, the Fe/β zeolite catalysts were stable and remained constant catalytic activity after five consecutive runs. The possible active Fe species for isomerization of glucose in Fe/β zeolite is also discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Biodegradation performance of environmentally-friendly insulating oil

Science.gov (United States)

Yang, Jun; He, Yan; Cai, Shengwei; Chen, Cheng; Wen, Gang; Wang, Feipeng; Fan, Fan; Wan, Chunxiang; Wu, Liya; Liu, Ruitong

2018-02-01

In this paper, biodegradation performance of rapeseed insulating oil (RDB) and FR3 insulating oil (FR3) was studied by means of ready biodegradation method which was performed with Organization for Economic Co-operation and Development (OECD) 301B. For comparison, the biodegradation behaviour of 25# mineral insulating oil was also characterized with the same method. The testing results shown that the biodegradation degree of rapeseed insulating oil, FR3 insulating oil and 25# mineral insulating oil was 95.8%, 98.9% and 38.4% respectively. Following the “new chemical risk assessment guidelines” (HJ/T 154 - 2004), which illustrates the methods used to identify and assess the process safety hazards inherent. The guidelines can draw that the two vegetable insulating oils, i.e. rapeseed insulating oil and FR3 insulating oil are easily biodegradable. Therefore, the both can be classified as environmentally-friendly insulating oil. As expected, 25# mineral insulating oil is hardly biodegradable. The main reason is that 25# mineral insulating oil consists of isoalkanes, cyclanes and a few arenes, which has few unsaturated bonds. Biodegradation of rapeseed insulating oil and FR3 insulating oil also remain some difference. Biodegradation mechanism of vegetable insulating oil was revealed from the perspective of hydrolysis kinetics.

BUMPER: the Bayesian User-friendly Model for Palaeo-Environmental Reconstruction

Science.gov (United States)

Holden, Phil; Birks, John; Brooks, Steve; Bush, Mark; Hwang, Grace; Matthews-Bird, Frazer; Valencia, Bryan; van Woesik, Robert

2017-04-01

We describe the Bayesian User-friendly Model for Palaeo-Environmental Reconstruction (BUMPER), a Bayesian transfer function for inferring past climate and other environmental variables from microfossil assemblages. The principal motivation for a Bayesian approach is that the palaeoenvironment is treated probabilistically, and can be updated as additional data become available. Bayesian approaches therefore provide a reconstruction-specific quantification of the uncertainty in the data and in the model parameters. BUMPER is fully self-calibrating, straightforward to apply, and computationally fast, requiring 2 seconds to build a 100-taxon model from a 100-site training-set on a standard personal computer. We apply the model's probabilistic framework to generate thousands of artificial training-sets under ideal assumptions. We then use these to demonstrate both the general applicability of the model and the sensitivity of reconstructions to the characteristics of the training-set, considering assemblage richness, taxon tolerances, and the number of training sites. We demonstrate general applicability to real data, considering three different organism types (chironomids, diatoms, pollen) and different reconstructed variables. In all of these applications an identically configured model is used, the only change being the input files that provide the training-set environment and taxon-count data.

An environmentally-friendly vacuum reduction metallurgical process to recover germanium from coal fly ash

Energy Technology Data Exchange (ETDEWEB)

Zhang, Lingen; Xu, Zhenming, E-mail: zmxu@sjtu.edu.cn

2016-07-15

Highlights: • An environmental friendly vacuum reduction metallurgical process is proposed. • Rare and valuable metal germanium from coal fly ash is recycled. • Residues are not a hazardous material and can be further recycled. • A germanium recovery ratio of 94.64% is obtained in pilot scale experiments. - Abstract: The demand for germanium in the field of semiconductor, electronics, and optical devices is growing rapidly; however, the resources of germanium are scarce worldwide. As a secondary material, coal fly ash could be further recycled to retrieve germanium. Up to now, the conventional processes to recover germanium have two problems as follows: on the one hand, it is difficult to be satisfactory for its economic and environmental effect; on the other hand, the recovery ratio of germanium is not all that could be desired. In this paper, an environmentally-friendly vacuum reduction metallurgical process (VRMP) was proposed to recover germanium from coal fly ash. The results of the laboratory scale experiments indicated that the appropriate parameters were 1173 K and 10 Pa with 10 wt% coke addition for 40 min, and recovery ratio germanium was 93.96%. On the basis of above condition, the pilot scale experiments were utilized to assess the actual effect of VRMP for recovery of germanium with parameter of 1473 K, 1–10 Pa and heating time 40 min, the recovery ratio of germanium reached 94.64%. This process considerably enhances germanium recovery, meanwhile, eliminates much of the water usage and residue secondary pollution compared with other conventional processes.

Microbiological Leaching; an Environmentally Friendly and Cost Effective Method for Extraction of Metals

Directory of Open Access Journals (Sweden)

Ghobeiti-Hasab Mehdi

2018-02-01

Full Text Available Finding a cleaner, environmentally friendly and cost-effective way of metal and mineral extraction has a great importance in today’s world. Using microorganisms in bio-leaching and bio-oxidation process is of great value. From Archaea to bacteria and fungi, microorganisms can play an important role in extraction of metals from mine drainage and un-accessible sources, both in aquatic and terrestrial environments. Optimization of environmental factors such as the temperature, pH and substrate concentration is crucially important to access the optimum extraction of selected metals from an ore or mine drainage. The present paper will review the bio-leaching and bio-oxidation process of minerals with emphasis on the most well-known species of bacterial communities of such ability, through the literature.

Ukrainian realities of labeling of environmentally friendly products

Directory of Open Access Journals (Sweden)

I.M. Tsaruk

2016-12-01

Full Text Available The basis of life of any society is a safe environment that is not only the guarantee of welfare and quality of life, but also the guarantee of the further development of human civilization. That is why in the modern world the issue of the preservation of the natural environment is of special actuality. The gradual awareness by humanity of new threats (high degree of concentration of harmful industries; high level of resource and energy consumption; lack of modern environmental technologies; slow but inevitable degradation of the gene pool of a population due to the consumption of poor quality and in most cases harmful products, etc. forced the society to seek new approaches to socio-economic development and environmental management. One of such approaches is the introduction of ecological and organic labeling. Marking is a source of information about the purity, safety and quality of the products offered in the market; effective information mechanism, which is a kind of quality mark for the offered products. The current practice of ecological and organic labeling aimed at the increase of level consumer's awareness and the changing models of purchasing behavior in the direction of environmental protection. The feature of most marking systems of environmentally friendly and safe products is the obligation of compliance with the established requirements used by producers of raw materials and technologies taking into account their potential environmental impact. Labeling of ecologically clean and safe products is reducing the negative impact on the environment and on the human's health. It is the consequence of changes in the economic environment, namely: the improvement of socio-ethical requirements to production; the increasing level of integration of producers and service providers; the customer's satisfaction in varieties of products; globalization of economic space; reduction of time for development, standardization and production. Labeling is

Hydration characteristics and environmental friendly performance of a cementitious material composed of calcium silicate slag

Energy Technology Data Exchange (ETDEWEB)

Zhang, Na; Li, Hongxu [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Beijing Key Laboratory of Rare and Precious Metals Green Recycling and Extraction, University of Science and Technology Beijing, Beijing 100083 (China); Zhao, Yazhao [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Liu, Xiaoming, E-mail: liuxm@ustb.edu.cn [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Beijing Key Laboratory of Rare and Precious Metals Green Recycling and Extraction, University of Science and Technology Beijing, Beijing 100083 (China)

2016-04-05

Highlights: • Cementitious material was designed according to [SiO{sub 4}] polymerization degree of raw materials. • The cementitious material composed of calcium silicate slag yields excellent physical and mechanical properties. • Amorphous C–A–S–H gel and rod-like ettringite are predominantly responsible for the strength development. • Leaching toxicity and radioactivity tests show the cementitious material is environmentally acceptable. - Abstract: Calcium silicate slag is an alkali leaching waste generated during the process of extracting Al{sub 2}O{sub 3} from high-alumina fly ash. In this research, a cementitious material composed of calcium silicate slag was developed, and its mechanical and physical properties, hydration characteristics and environmental friendly performance were investigated. The results show that an optimal design for the cementitious material composed of calcium silicate slag was determined by the specimen CFSC7 containing 30% calcium silicate slag, 5% high-alumina fly ash, 24% blast furnace slag, 35% clinker and 6% FGD gypsum. This blended system yields excellent physical and mechanical properties, confirming the usefulness of CFSC7. The hydration products of CFSC7 are mostly amorphous C–A–S–H gel, rod-like ettringite and hexagonal-sheet Ca(OH){sub 2} with small amount of zeolite-like minerals such as CaAl{sub 2}Si{sub 2}O{sub 8}·4H{sub 2}O and Na{sub 2}Al{sub 2}Si{sub 2}O{sub 8}·H{sub 2}O. As the predominant hydration products, rod-like ettringite and amorphous C–A–S–H gel play a positive role in promoting densification of the paste structure, resulting in strength development of CFSC7 in the early hydration process. The leaching toxicity and radioactivity tests results indicate that the developed cementitious material composed of calcium silicate slag is environmentally acceptable. This study points out a promising direction for the proper utilization of calcium silicate slag in large quantities.

DECO FRECASE (drywall eco-friendly from eggshell and cane bagasse) as an innovation of eco-friendly interior construction

Science.gov (United States)

Imron, M. A.; Ahkam, D. N. I.; Hidayat, A. W.

2017-12-01

The number of factories and home industries, both upper and lower middle class certainly adds waste generated, resulting in environmental pollution. The development of buildings is one of the largest contributors to global warming. For that, it takes technological innovations that lead to the criteria of green building. The application of green material is important aspects of environmentally friendly development, the selection of materials on the green material criteria of both roles should be applied continuously in order to realize the environmental sustainability of the material. Utilization Waste eggshell and bagasse which is a community waste, has the potential to become innovative environmentally friendly building materials. The eggshell is composed of 94% calcium carbonate, 1% magnesium carbonate, 1% calcium phosphate, and 4% organic material, especially protein, while the bagasse has a high content of silica (SiO2). In this study, the compounds are used as raw material for making alternative drywall in the form of DECO FRECASE. DECO FRECASE is an innovation of environmentally friendly building materials as an interior wall construction. Through DECO FRECASE, it is expected that building material innovation in Indonesia can be improved and of course environmental problems can be minimized by utilizing it as raw material for building construction.

Helping people build a better world? Barriers to more environmentally friendly energy production in China: the case of Shell

Energy Technology Data Exchange (ETDEWEB)

Buan, Inga Fritzen

2008-03-15

China's rapid industrialization and economic expansion are causing massive environmental damage, with consequences beyond the country's borders, especially due to the use of fossil fuels' effect on climate change. Shell China can contribute to making energy production, if not clean and sustainable, then cleaner and more sustainable by making existing energy production more environmentally friendly; by diversifying and developing alternative energy sources; and by creating precedence influencing others to follow in its footsteps. The first goal of this report is to identify and analyze changes that have happened in the Shell Group since the 1990s when energy companies started their 'greening' processes. These changed happened due to stricter environmental legislation, increased civil society pressure and media scrutiny. Changes on the global and headquarters level in a company do not, however, necessitate similar developments in its national and local level operations. The second goal is thus to analyze to which degree the changes in the Shell Group have had relevance for Shell China and whether barriers in the Chinese context influence its prospects to operate in a more environmentally friendly way. (author). 64 refs

An environmentally-friendly fluorescent method for quantification of lipid contents in yeast

DEFF Research Database (Denmark)

Severo Poli, Jandora; Lützhøft, Hans-Christian Holten; Karakashev, Dimitar Borisov

2014-01-01

lipid and the calibration curve showed linearity (R2 = 0.994) between 0.50 and 25 mg/L. Compared with traditional gravimetric analysis, the developed method is much faster and uses less organic solvents. Lipid contents determined by fluorescence and gravimetry were the same for some strains......This study aimed at developing an efficient, fast and environmentally-friendly method to quantify neutral lipid contents in yeast. After optimising the fluorescence instrument parameters and influence of organic solvent concentrations, a new method to quantify neutral lipids in yeast based......, but for other strains the lipid contents determined by fluorescence were less. This new method will therefore be suitable for fast screening purposes....

Bio-based fillers for environmentally friendly composites

CSIR Research Space (South Africa)

Mokhothu, Thabang H

2017-03-01

Full Text Available The use of bio-based fillers as alternative replacement for synthetic fillers has been dictated by increasing ecological concerns as well as depleting petroleum resources. The other aspect is a growing need for eco-friendly, renewable...

Spillover of environment-friendly consumer behaviour

DEFF Research Database (Denmark)

Thøgersen, John; Ølander, Carl Folke

2003-01-01

This paper contributes empirical input to current reasoning about consumers' propensity to behave in an environmentally friendly way in different domains. Spe-cifically, we investigate whether environmentally friendly behaviours spread to more and more areas of the consumption pattern in a virtuous...... circle and whether it is a necessary prerequisite for a virtuous circle to emerge and to continue to work that the individual possesses certain general values or ethical norms. The data material is a three-wave panel study with a large random sample of Danish consumers. The data were analysed by means...... of structural equation modelling and other techniques. Cases of transfer of environment-friendly conduct between behavioural categories are found, but only in a few of the possible instances and only of a modest size. The panel analysis also identifies a few negative cross-lagged effects. Such effects may...

An eco-friendly approach for sodium chloride free cotton dyeing

International Nuclear Information System (INIS)

Umer, T.

2014-01-01

Present study was conducted with an aim to develop an environmental friendly method of dyeing cotton as an alternative to standard reactive dyeing process that requires high level of salt. When dyeing was carried out in the absence of sodium chloride (NaCl), an extremely lighter depth of shade was experienced, and hence this particular research was focused on the reduction of the total colour difference (AE) to a minimum level. Instead of adding any other chemical or any additional process like cationization, salt-free reactive dyeing was carried out by varying three common process parameters (dyes, alkali, and process time) to achieve required depth of shade. The results obtained were compared with those of conventionally dyed fabrics in terms of depth of shade (AL), total colour difference (AE), washing fastness, and rubbing fastness. The results were found to be promising and comparable to those dyed with using NaCl. Moreover, the investigated method showed a significant reduction of Total Dissolved Solids (TDS) and Electrical Conductivity (EC) in the wastewater, and thus proved to be an environment friendly process. (author)

Promoting energy-saving and environmentally friendly generation dispatching model in China: Phase development and case studies

DEFF Research Database (Denmark)

Ding, Yi; Yang, Hongliang

2013-01-01

Energy saving and environmental protection are important conditions for the sustainable development of Chinese economy. However current widely used generation scheduling model based on predefined production quota and tariff results in heavy energy consumption and severe environment pollution. From...... 2007, as concerns over energy shortage and environmental pollution, the Chinese authorities introduced the implementation of energy-saving generation dispatching model, which is an important approach to facilitating energy-saving and reduction of pollutant emission. The objective of implementing energy......-saving generation dispatching model is to prioritize the use of renewable energy resources and new power plants with high efficiency without compromising power system security and reliability. This paper analyzes the necessity and feasibility of implementing energy-efficient and environmentally friendly generation...

Environmentally friendly inhibition of pathogenic bacteria and algae propagation due phthalocyanine agents

International Nuclear Information System (INIS)

Rihova Ambrozova, J.; Bezdekova, E.; Louckova, E.; Nekovarova, J.

2007-01-01

From 2004, in the laboratory of The Institute of Chemical Technology in Prague is being solved the project FT-TA/034 'Environmentally friendly inhibition of pathogenic bacteria and algae propagation in the circulatory cooling systems of nuclear power stations and in other similar technological facilities' to determine effects of phthalocyanine agents. The project bearer is VUOS, Inc. in Rybitvi (Research Institute for Organic Synthesis Inc.), where are the new phthalocyanines synthesized. The aimed goal of the research is environmentally friendly liquidation of bacteria and algae by means of photodynamic generated singlet oxygen through impact of solar radiation in the circulation cooling waters of various technical and technological systems. The principle of the problem outlined is the applying of phthalocyanine agents on samples of pure bacterial, anabaenas and algae cultures to estimate the inhibition effect on the organism exposed. In the course of solution, it is assumed that in such way conducted inhibition of bacteria, anabaenas and algae as well of their proliferation would replace routinely used bactericidal and algicidal preparations, which demand permanent dosing into circulating waters or perhaps from time to time an application of shocking doses. The particular algicidal and bactericidal agents represents in this case in situ emerging singlet oxygen, that is harmless to water biocenoses and whose presence in the water is no reason to ban the outflow of waters treated in such a way into water streams. The goal should be also a direct estimation of the effect those agents on cooling waters samples e. g. from the nuclear power plant systems. The purpose of the tests performance is also elimination of filamentous green algae, emerging in the systems cooling towers. The applied preparations are not toxic and do not burden the living environment, they contain no substances interacting with surface materials of structures in the circulatory cooling circuit

An easy and environmentally-friendly approach to superamphiphobicity of aluminum surfaces

Energy Technology Data Exchange (ETDEWEB)

Deng, R. [School of Materials Science and Engineering, Yunnan University, Kunming 650091 (China); Hu, Y.M., E-mail: yongmaohu@163.com [College of Engineering, Dali University, Dali 671003 (China); Wang, L.; Li, Zh.H.; Shen, T. [Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093 (China); Zhu, Y., E-mail: zhuyan@kmust.edu.cn [Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093 (China); Xiang, J.Zh., E-mail: jzhxiang@ynu.edu.cn [School of Materials Science and Engineering, Yunnan University, Kunming 650091 (China)

2017-04-30

Highlights: • Superamphiphobic Al surfaces were achieved via an approach of chemical etching and low surface energy material modification. • The process of chemical etching and hot water bathing were optimized to obtain desirable hierarchical micro/nanoscale structures. • The surface morphology, chemistry and wetting properties of the as-prepared aluminum surfaces were characterized and discussed. • The mechanical robustness and chemical stability of the as-prepared superamphiphobic Al surfaces were tested and evaluated. - Abstract: Superamphiphobic Al surfaces were achieved via an easy and environmentally-friendly approach. Aqueous mixed solution of 0.7 M CuSO{sub 4} and 1 M NaCl was used to etch polished Al surfaces to fabricate a rough morphology distributed with microscale step-like pits. The uniformly distributed nanoscale petals covered on the microscale pits were obtained by subsequent 96 °C hot deionized water bathing for 13 min. Thus, the hierarchical micro/nanometer scale roughness was formed which provided the structural basic of superamphiphobic Al surfaces. By 1H, 1H, 2H, 2H-Perfluorodecyl-triethoxysilane (PFDTS) derivatization, desirable superamphiphobic Al surfaces were achieved with the highest static contact angles of 162° for water, 156° for peanut oil, respectively. Meanwhile, the sliding angles were lower than 10° for both water and peanut oil droplets. The as-prepared Al surfaces were investigated by field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and optical contact angle measurements. The FE-SEM images of as-prepared Al surfaces showed a hierarchical micro/nanometer scale morphology. XPS analyses demonstrated the PFDTS derivitization on Al surfaces. The superamphiphobic Al surfaces presented good mechanical durability and chemical stability which have a wide range of applications in fields such as self-cleaning, anti-icing, anti

An easy and environmentally-friendly approach to superamphiphobicity of aluminum surfaces

International Nuclear Information System (INIS)

Deng, R.; Hu, Y.M.; Wang, L.; Li, Zh.H.; Shen, T.; Zhu, Y.; Xiang, J.Zh.

2017-01-01

Highlights: • Superamphiphobic Al surfaces were achieved via an approach of chemical etching and low surface energy material modification. • The process of chemical etching and hot water bathing were optimized to obtain desirable hierarchical micro/nanoscale structures. • The surface morphology, chemistry and wetting properties of the as-prepared aluminum surfaces were characterized and discussed. • The mechanical robustness and chemical stability of the as-prepared superamphiphobic Al surfaces were tested and evaluated. - Abstract: Superamphiphobic Al surfaces were achieved via an easy and environmentally-friendly approach. Aqueous mixed solution of 0.7 M CuSO 4 and 1 M NaCl was used to etch polished Al surfaces to fabricate a rough morphology distributed with microscale step-like pits. The uniformly distributed nanoscale petals covered on the microscale pits were obtained by subsequent 96 °C hot deionized water bathing for 13 min. Thus, the hierarchical micro/nanometer scale roughness was formed which provided the structural basic of superamphiphobic Al surfaces. By 1H, 1H, 2H, 2H-Perfluorodecyl-triethoxysilane (PFDTS) derivatization, desirable superamphiphobic Al surfaces were achieved with the highest static contact angles of 162° for water, 156° for peanut oil, respectively. Meanwhile, the sliding angles were lower than 10° for both water and peanut oil droplets. The as-prepared Al surfaces were investigated by field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and optical contact angle measurements. The FE-SEM images of as-prepared Al surfaces showed a hierarchical micro/nanometer scale morphology. XPS analyses demonstrated the PFDTS derivitization on Al surfaces. The superamphiphobic Al surfaces presented good mechanical durability and chemical stability which have a wide range of applications in fields such as self-cleaning, anti-icing, anti-corrosion, oil

Feasibility survey of the environmentally-friendly coal utilization system. Feasibility survey of the environmentally-friendly coal utilization system in the Philippines; Kankyo chowagata sekitan riyo system kanosei chosa. Philippines ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

With relation to the coal of the Philippines, where the expansion of the use of coal as a substitute for petroleum/plant fuel is aimed at, the paper grasped the situation of coal production/development, the trend of coal import and domestic distribution, the coal utilization trend, and environmental problems, and analyzed the situation of coal utilization/spread by industry including the commercial/residential use. The purpose of the survey is to draw up a master plan for the introduction of the environmentally-friendly coal utilization system. As to the use of environmentally-friendly coal technology which should be adopted to the coal mining industry and commercial/residential sector, cited are the introduction of coal preparation technology and power transmission technology, and the development/spread of briquette as a firewood substituting fuel. In the electric power sector, the problem is the treatment of ash after combustion and the effective use. Relating to the treatment of flue gas, there is no installation at all of desulfurization facilities and denitrification facilities. In the cement industry sector, they wish to return fuel from heavy oil to coal. For it, it is necessary to study dust preventive measures. In the other sectors, coal hasn`t been used very much. An increase in coal demand is not expected also in the future, and big problems concerning coal haven`t occurred. 42 figs., 64 tabs.

Introduction of Microbial Biopolymers in Soil Treatment for Future Environmentally-Friendly and Sustainable Geotechnical Engineering

Directory of Open Access Journals (Sweden)

Ilhan Chang

2016-03-01

Full Text Available Soil treatment and improvement is commonly performed in the field of geotechnical engineering. Methods and materials to achieve this such as soil stabilization and mixing with cementitious binders have been utilized in engineered soil applications since the beginning of human civilization. Demand for environment-friendly and sustainable alternatives is currently rising. Since cement, the most commonly applied and effective soil treatment material, is responsible for heavy greenhouse gas emissions, alternatives such as geosynthetics, chemical polymers, geopolymers, microbial induction, and biopolymers are being actively studied. This study provides an overall review of the recent applications of biopolymers in geotechnical engineering. Biopolymers are microbially induced polymers that are high-tensile, innocuous, and eco-friendly. Soil–biopolymer interactions and related soil strengthening mechanisms are discussed in the context of recent experimental and microscopic studies. In addition, the economic feasibility of biopolymer implementation in the field is analyzed in comparison to ordinary cement, from environmental perspectives. Findings from this study demonstrate that biopolymers have strong potential to replace cement as a soil treatment material within the context of environment-friendly construction and development. Moreover, continuing research is suggested to ensure performance in terms of practical implementation, reliability, and durability of in situ biopolymer applications for geotechnical engineering purposes.

Investigation of Environmental-friendly Technology for a Paint Industry Wastewater Plant in Turkey

Directory of Open Access Journals (Sweden)

Pelin YAPICIOĞLU

2018-02-01

Full Text Available Paint manufacturing process has several unfavorable aspects to the environment in Turkey. One of these impacts is wastewater treatment. Paint wastewater contains huge amounts of toxic chemical substances, bio refractory compounds, pigments and microorganisms. So, advanced treatment requirement is available to dispose of colour, microorganisms and chemical oxygen demand (COD. The high organic content of wastewater causes serious environmental challenges and contamination for the living organisms and the ecosystem in the receiver media unless it is treated adequately. In this context, the treatment process to be implemented should be preferred in such a way as to give the least damage to the environment. In this study, three treatment scenarios that contain electrocoagulation (Scenario-1, Fenton process (Scenario-2 and membrane distillation (Scenario-3 have been created for wastewater treatment facility of a paint industry in Turkey. For three scenarios, environmental impact assessment has been carried out with Fine-Kinney method. It is aimed to choose best environmental technology before investment. The evaluation results revealed that Scenario-2 has the less environmental impacts that total impact value is 556. Scenario-1 has the highest total impact value as 756, relatively. Total impact value related to Scenario-3 is 637. According to the evaluation results, Fenton process is the best environmental-friendly treatment technology for wastewater treatment of a paint industry in Turkey.

Environment-friendly drilling operation technology

Science.gov (United States)

Luo, Huaidong; Jing, Ning; Zhang, Yanna; Huang, Hongjun; Wei, Jun

2017-01-01

Under the circumstance that international safety and environmental standards being more and more stringent, drilling engineering is facing unprecedented challenges, the extensive traditional process flow is no longer accepted, the new safe and environment-friendly process is more suitable to the healthy development of the industry. In 2015, CNPCIC adopted environment-friendly drilling technology for the first time in the Chad region, ensured the safety of well control, at the same time increased the environmental protection measure, reduced the risk of environmental pollution what obtain the ratification from local government. This technology carries out recovery and disposal of crude oil, cuttings and mud without falling on the ground. The final products are used in road and well site construction, which realizes the reutilization of drilling waste, reduces the operating cost, and provides a strong technical support for cost-cutting and performance-increase of drilling engineering under low oil price.

Constraints in the Adoption of Eco Friendly Conservation Practices

Directory of Open Access Journals (Sweden)

L. Murali Krishnan

2016-05-01

Insect pest and diseases management, Lack of awareness of agro environmental problems and farmer’s attitude towards the Eco Friendly Conservation Practices are the major constraints in the adoption of Eco Friendly Conservation Practices.The study suggests educational, extension & training strategies for fostering the adopted of ECO friendly Conservation Practices.

Polystyrene Supported Al(OTf)3: an Environmentally Friendly Heterogeneous Catalyst for Friedel-Crafts Acylation of Aromatic Compounds

International Nuclear Information System (INIS)

Boroujeni, Kaveh Parvanak

2010-01-01

Stable and non-hygroscopic polystyrene supported aluminium triflate (Ps-Al(OTf) 3 ), which is prepared easily from cheap and commercially available compounds was found to be an environmentally friendly heterogeneous catalyst for Friedel-Crafts acylation of arenes using acid chlorides in the absence of solvent under mild reaction conditions. The catalyst can be reused up to five times after simple washing with dichloromethane

A novel, environmentally friendly sodium lauryl ether sulfate-, cocamidopropyl betaine-, cocamide monoethanolamine-containing buffer for MEKC on microfluidic devices.

Science.gov (United States)

Hoeman, Kurt W; Culbertson, Christopher T

2008-12-01

A new buffer has been developed for fast, high-efficiency separations of amino acids by MEKC. This buffer was more environmentally friendly than the most commonly used surfactant-containing buffers for MEKC separations. It used a commercially available dishwashing soap by Seventh Generation (Burlington, VT, USA), which contained three micelle-forming agents. The mixed micelles were composed of sodium lauryl ether sulfate (anionic), cocamidopropyl betaine (zwitterionic), and cocamide monoethanolamine (non-ionic). The optimized buffer contained 5.0% w/w Seventh Generation Free & Clear dishwashing soap, 10 mM sodium borate, and was completely void of organics. The lack of organics and the biodegradability of the surfactant molecules made this buffer more environmentally friendly than typical SDS-containing buffers. This new buffer also had a different selectivity and provided faster separations with higher separation efficiencies than SDS-based buffers. Fast separations of BODIPY FL labeled amino acids yielded peaks with separation efficiencies greater than 100,000 in less than 20 s.

Development and Substantiation of Parameters of Environmentally Friendly Technology for Filling the Vertical Mine Workings with Autoclaved Slag-Concrete

Directory of Open Access Journals (Sweden)

Uglyanitca Andrey

2017-01-01

Full Text Available The environmentally friendly technology for filling the vertical mine workings with autoclaved slag-concrete, prefabricated on the surface of the mine is presented in the article; the optimal parameters of filling technology are proposed. The developed technology for filling the abandoned vertical mine workings allows ensuring the environmental safety of the territories adjacent to the abandoned mine, utilizing slag dumps and providing the possibility of shaft recovery, if necessary, with minimal labor and material costs.

Efficient, environmentally-friendly and specific valorization of lignin: promising role of non-radical lignolytic enzymes.

Science.gov (United States)

Wang, Wenya; Zhang, Chao; Sun, Xinxiao; Su, Sisi; Li, Qiang; Linhardt, Robert J

2017-06-01

Lignin is the second most abundant bio-resource in nature. It is increasingly important to convert lignin into high value-added chemicals to accelerate the development of the lignocellulose biorefinery. Over the past several decades, physical and chemical methods have been widely explored to degrade lignin and convert it into valuable chemicals. Unfortunately, these developments have lagged because of several difficulties, of which high energy consumption and non-specific cleavage of chemical bonds in lignin remain the greatest challenges. A large number of enzymes have been discovered for lignin degradation and these are classified as radical lignolytic enzymes and non-radical lignolytic enzymes. Radical lignolytic enzymes, including laccases, lignin peroxidases, manganese peroxidases and versatile peroxidases, are radical-based bio-catalysts, which degrade lignins through non-specific cleavage of chemical bonds but can also catalyze the radical-based re-polymerization of lignin fragments. In contrast, non-radical lignolytic enzymes selectively cleave chemical bonds in lignin and lignin model compounds and, thus, show promise for use in the preparation of high value-added chemicals. In this mini-review, recent developments on non-radical lignolytic enzymes are discussed. These include recently discovered non-radical lignolytic enzymes, their metabolic pathways for lignin conversion, their recent application in the lignin biorefinery, and the combination of bio-catalysts with physical/chemical methods for industrial development of the lignin refinery.

Environmental friendly method for the extraction of coir fibre and isolation of nanofibre.

Science.gov (United States)

Abraham, Eldho; Deepa, B; Pothen, L A; Cintil, J; Thomas, S; John, M J; Anandjiwala, R; Narine, S S

2013-02-15

The objective of this work was to develop an environmental friendly method for the effective utilization of coir fibre by adopting steam pre-treatment. The retting of the coconut bunch makes strong environmental problems which can be avoided by this method. Chemical characterization of the fibre during each processing stages confirmed the increase of cellulose content from raw (40%) to final steam treated fibres (93%). Morphological and dynamic light scattering analyses of the fibres at different processing stages revealed that the isolation of cellulose nano fibres occur in the final step of the process as an aqueous suspension. FT-IR and XRD analysis demonstrated that the treatments lead to the gradual removal of lignin and hemicelluloses from the fibres. The existence of strong lignin-cellulose complex in the raw coir fibre is proved by its enhanced thermal stability. Steam explosion has been proved to be a green method to expand the application areas of coir fibre. Copyright © 2012 Elsevier Ltd. All rights reserved.

Advanced, Environmentally Friendly Hydroelectric Turbines for the Restoration of Fish and Water Quality

International Nuclear Information System (INIS)

Brookshier, P.A.; Cada, G.F.; Flynn, J.V.; Rinehart, B.N.; Sale, M.J.; Sommers, G.L.

1999-01-01

Hydroelectric power contributes about 10 percent of the electrical energy generated in the United States, and nearly 20 percent of the worlds electrical energy. The contribution of hydroelectric generation has declined in recent years, often as a consequence of environmental concerns centering around (1) restriction of upstream and downstream fish passage by the dam, and (2) alteration of water quality and river flows by the impoundment. The Advanced Hydropower Turbine System (AHTS) Program of the U.S. Department of Energy is developing turbine technology which would help to maximize global hydropower resources while minimizing adverse environmental effects. Major technical goals for the Program are (1) the reduction of mortality among turbine-passed fish to 2 percent or less, compared to current levels ranging up to 30 percent or greater; and (2) development of aerating turbines that would ensure that water discharged from reservoirs has a dissolved oxygen concentration of at least 6 mg/L. These advanced, environmentally friendly turbines would be suitable both for new hydropower installations and for retrofitting at existing dams. Several new turbine designs that have been he AHTS program are described

Environmentally-friendly lithium recycling from a spent organic li-ion battery.

Science.gov (United States)

Renault, Stéven; Brandell, Daniel; Edström, Kristina

2014-10-01

A simple and straightforward method using non-polluting solvents and a single thermal treatment step at moderate temperature was investigated as an environmentally-friendly process to recycle lithium from organic electrode materials for secondary lithium batteries. This method, highly dependent on the choice of electrolyte, gives up to 99% of sustained capacity for the recycled materials used in a second life-cycle battery when compared with the original. The best results were obtained using a dimethyl carbonate/lithium bis(trifluoromethane sulfonyl) imide electrolyte that does not decompose in presence of water. The process implies a thermal decomposition step at a moderate temperature of the extracted organic material into lithium carbonate, which is then used as a lithiation agent for the preparation of fresh electrode material without loss of lithium. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Environmental epigenetics: A promising venue for developing next-generation pollution biomonitoring tools in marine invertebrates.

Science.gov (United States)

Suarez-Ulloa, Victoria; Gonzalez-Romero, Rodrigo; Eirin-Lopez, Jose M

2015-09-15

Environmental epigenetics investigates the cause-effect relationships between specific environmental factors and the subsequent epigenetic modifications triggering adaptive responses in the cell. Given the dynamic and potentially reversible nature of the different types of epigenetic marks, environmental epigenetics constitutes a promising venue for developing fast and sensible biomonitoring programs. Indeed, several epigenetic biomarkers have been successfully developed and applied in traditional model organisms (e.g., human and mouse). Nevertheless, the lack of epigenetic knowledge in other ecologically and environmentally relevant organisms has hampered the application of these tools in a broader range of ecosystems, most notably in the marine environment. Fortunately, that scenario is now changing thanks to the growing availability of complete reference genome sequences along with the development of high-throughput DNA sequencing and bioinformatic methods. Altogether, these resources make the epigenetic study of marine organisms (and more specifically marine invertebrates) a reality. By building on this knowledge, the present work provides a timely perspective highlighting the extraordinary potential of environmental epigenetic analyses as a promising source of rapid and sensible tools for pollution biomonitoring, using marine invertebrates as sentinel organisms. This strategy represents an innovative, groundbreaking approach, improving the conservation and management of natural resources in the oceans. Copyright © 2015 Elsevier Ltd. All rights reserved.

A hybrid discrete choice model to assess the effect of awareness and attitude towards environmentally friendly travel modes

DEFF Research Database (Denmark)

Sottile, Eleonora; Meloni, Italo; Cherchi, Elisabetta

2015-01-01

The need to reduce private vehicle use has led to the development of soft measures aimed at re-educating car users through information processes that raise their awareness regarding the benefits of environmentally friendly modes, encouraging them to voluntarily change their mode choice behaviour......&R) instead of their car, we estimated a hybrid mode choice model....

Environmentally friendly wood preservatives formulated with enzymatic-hydrolyzed okara, copper and/or boron salts

International Nuclear Information System (INIS)

Ahn, Sye Hee; Oh, Sei Chang; Choi, In-gyu; Han, Gyu-seong; Jeong, Han-seob; Kim, Ki-woo; Yoon, Young-ho; Yang, In

2010-01-01

Novel biocides, such as copper azole (CuAz) and ammoniacal copper quaternary (ACQ), are extensively used as substitutes for chromate copper arsenate (CCA) in wood preservation. However, the expense of these biocides has necessitated the development of cost-effective and environmentally friendly wood preservatives. This study was conducted to investigate the effectiveness against decaying fungi of the preservatives formulated with enzymatic-hydrolyzed okara (OK), which is an organic waste produced from the manufacture of tofu, CuCl 2 (CC) and/or Na 2 B 4 O 7 .10H 2 O (B). With the addition of NH 4 OH as a dissociating agent, the addition of OK facilitated the target retention of most of the OK/CC and OK/CC/B preservative formulations in wood blocks. The OK-based wood preservatives (OK-WPs) were stable against hot-water leaching. When compared with control and CC-treated wood blocks, the leached wood blocks treated with OK/CC and OK/CC/B formulations showed excellent decay resistance against both Postia placenta and Gloeophyllum trabeum, especially when OK was hydrolyzed by Celluclast at a loading level of 0.1 ml/g. Scanning electron microscopy (SEM) and SEM-energy dispersive X-ray (SEM-EDX) spectrometry analyses demonstrated that preservative complexes, such as OK-CC and OK-CC-B, existed in the wood blocks treated with OK/CC and OK/CC/B formulations. This study results support the potential application of OK-WPs as environmentally friendly wood preservatives capable of replacing CuAz and ACQ.

Environmentally friendly wood preservatives formulated with enzymatic-hydrolyzed okara, copper and/or boron salts

Energy Technology Data Exchange (ETDEWEB)

Ahn, Sye Hee; Oh, Sei Chang [Department of Forest Resources, Daegu University, Gyeongsan 712-714 (Korea, Republic of); Choi, In-gyu [Department of Forest Sciences, Seoul National University, Seoul 151-921 (Korea, Republic of); Han, Gyu-seong [Department of Wood and Paper Sciences, Chungbuk National University, Cheongju 361-763 (Korea, Republic of); Jeong, Han-seob [Department of Forest Sciences, Seoul National University, Seoul 151-921 (Korea, Republic of); Kim, Ki-woo [National Instrumentation Center for Environmental Management, Seoul National University, Seoul 151-921 (Korea, Republic of); Yoon, Young-ho [KCI Co. Ltd., Seosan, Chungcheongnam-do 356-874 (Korea, Republic of); Yang, In, E-mail: dahadad2000@yahoo.com [Research Institute for Agriculture and Life Sciences, Seoul National University, San 56-1 Sillim-Dong, Kwanak-gu, Seoul 151-921 (Korea, Republic of)

2010-06-15

Novel biocides, such as copper azole (CuAz) and ammoniacal copper quaternary (ACQ), are extensively used as substitutes for chromate copper arsenate (CCA) in wood preservation. However, the expense of these biocides has necessitated the development of cost-effective and environmentally friendly wood preservatives. This study was conducted to investigate the effectiveness against decaying fungi of the preservatives formulated with enzymatic-hydrolyzed okara (OK), which is an organic waste produced from the manufacture of tofu, CuCl{sub 2} (CC) and/or Na{sub 2}B{sub 4}O{sub 7}.10H{sub 2}O (B). With the addition of NH{sub 4}OH as a dissociating agent, the addition of OK facilitated the target retention of most of the OK/CC and OK/CC/B preservative formulations in wood blocks. The OK-based wood preservatives (OK-WPs) were stable against hot-water leaching. When compared with control and CC-treated wood blocks, the leached wood blocks treated with OK/CC and OK/CC/B formulations showed excellent decay resistance against both Postia placenta and Gloeophyllum trabeum, especially when OK was hydrolyzed by Celluclast at a loading level of 0.1 ml/g. Scanning electron microscopy (SEM) and SEM-energy dispersive X-ray (SEM-EDX) spectrometry analyses demonstrated that preservative complexes, such as OK-CC and OK-CC-B, existed in the wood blocks treated with OK/CC and OK/CC/B formulations. This study results support the potential application of OK-WPs as environmentally friendly wood preservatives capable of replacing CuAz and ACQ.

Aluminium alloyed iron-silicide/silicon solar cells: A simple approach for low cost environmental-friendly photovoltaic technology.

Science.gov (United States)

Kumar Dalapati, Goutam; Masudy-Panah, Saeid; Kumar, Avishek; Cheh Tan, Cheng; Ru Tan, Hui; Chi, Dongzhi

2015-12-03

This work demonstrates the fabrication of silicide/silicon based solar cell towards the development of low cost and environmental friendly photovoltaic technology. A heterostructure solar cells using metallic alpha phase (α-phase) aluminum alloyed iron silicide (FeSi(Al)) on n-type silicon is fabricated with an efficiency of 0.8%. The fabricated device has an open circuit voltage and fill-factor of 240 mV and 60%, respectively. Performance of the device was improved by about 7 fold to 5.1% through the interface engineering. The α-phase FeSi(Al)/silicon solar cell devices have promising photovoltaic characteristic with an open circuit voltage, short-circuit current and a fill factor (FF) of 425 mV, 18.5 mA/cm(2), and 64%, respectively. The significant improvement of α-phase FeSi(Al)/n-Si solar cells is due to the formation p(+-)n homojunction through the formation of re-grown crystalline silicon layer (~5-10 nm) at the silicide/silicon interface. Thickness of the regrown silicon layer is crucial for the silicide/silicon based photovoltaic devices. Performance of the α-FeSi(Al)/n-Si solar cells significantly depends on the thickness of α-FeSi(Al) layer and process temperature during the device fabrication. This study will open up new opportunities for the Si based photovoltaic technology using a simple, sustainable, and los cost method.

Climate-friendly Default Rules

DEFF Research Database (Denmark)

Sunstein, Cass R.; Reisch, Lucia A.

. The underlying reasons include the power of suggestion; inertia and procrastination; and loss aversion. If well-chosen, climate-friendly defaults are likely to have large effects in reducing the economic and environmental harms associated with various products and activities. In deciding whether to establish...

Characterization of eco-friendly fluorescent nanoparticle-doped tracers for environmental sensing

International Nuclear Information System (INIS)

Tauro, Flavia; Rapiti, Emiliano; Al-Sharab, Jafar F.; Ubertini, Lucio; Grimaldi, Salvatore; Porfiri, Maurizio

2013-01-01

Particle tracers are extensively used in quantitative flow visualization and environmental sensing. In this paper, we provide a thorough characterization of the novel eco-friendly fluorescent particle tracers formulated in Tauro et al. (AIP Adv 3(3): 032108, 2013). The tracers are synthesized from natural beeswax and are functionalized by encapsulating nontoxic fluorophore nanoparticles in the beads’ matrix through an inexpensive thermal procedure. Visibility and durability studies are conducted through a wide array of techniques to investigate the tracers’ surface morphological microfeatures, crystal nature and size, chemical composition, fluorophore incorporation into the beeswax matrix, and fluorescence response under severe settings resembling exposure to natural environments. Our findings demonstrate that fluorescent nanoparticles ranging from 1.51 to 3.73 nm are homogeneously distributed in the superficial layer (12 nm) of the tracers. In addition, fluorescence emissions are observed up to 26 days of continuous exposure of the tracers to high energy radiation. To demonstrate the particles’ use in environmental flow sensing, a set of proof of concept outdoor tests are conducted, in which image analysis tools are utilized for detecting the fluorescent tracers. Experimental results suggest that fluorescent microparticles deployed in high flow-rate flows (2 m/s) and under direct sunlight can be sensed through commercially available cameras (frame rate set to 30 Hz)

Designing advanced materials by environmental friendly plasma electrolytic oxidation

International Nuclear Information System (INIS)

Toader, I.; Valeca, M.; Rusu, O.; Coaca, E.; Marin, A.

2016-01-01

In the CANDU-PHWR nuclear reactors, Zr-2.5Nb coated with a black adherent oxide film of 1 to 2 μm in thickness is currently used for the manufacture of pressure tubes. The black oxide thin film has corrosion protective properties. However, it can be damaged during the regular refueling process, thus causing hydrogen/oxygen ingression. Therefore, an enhanced wear and corrosion resistance coating is needed. Plasma electrolytic oxidation (PEO) is an anodic electrochemical treatment, both cost-effective and environmentally friendly, widely used in the formation of a protective oxide film on the metal surface to enhance wear and corrosion resistance as well as prolonging component lifetime. The state of the art reveals that PEO method is suitable for improving the wear resistance of Zr-2.5Nb alloy. Few studies are performed in this field and thus, it is necessary to conduct a more detailed insight study on the processing parameters for PEO treatment. By understanding the influence of process parameters, such as electrolyte temperature and electrolyte composition, we can find the way to obtain a coating with improved mechanical and corrosion properties on zirconium alloys. (authors)

CH3NH3Pb1-xMgxI3 perovskites as environmentally friendly photovoltaic materials

Science.gov (United States)

Zhang, Y. D.; Feng, J.

2018-01-01

In an effort to reduce the toxicity of Pb in perovskite solar cells, the band structures, electron and hole effective masses, and electronic and optical properties of the novel perovskites CH3NH3Pb1-xMgxI3 were predicted using density functional theory with the scalar relativistic generalized gradient approximation. The calculation results indicated that the introduction of the Mg component caused the band gaps of the CH3NH3Pb1-xMgxI3 compounds to exceed that of CH3NH3PbI3. The calculated absorption coefficients of the CH3NH3PbI3 and CH3NH3Pb1-xMgxI3 perovskites revealed that substituting 12.5 mol % of the Pb in CH3NH3PbI3 with Mg had little effect on the absorption ability. Surprisingly, it was also found that CH3NH3Pb0.75Mg0.25I3 retained up to 83% of the absorption performance relative to CH3NH3PbI3. This indicates that the amount of toxic Pb used in perovskite solar cells could be reduced by a quarter while retaining over 80% of the light-absorbing ability. In general, these novel CH3NH3Pb1-xMgxI3 (x ≤ 0.25) perovskites represent promising candidates for environmentally friendly light-harvesting materials for use in solar cells.

Environmentally friendly polymer nanocomposites: types, processing and properties

CSIR Research Space (South Africa)

Sinha Ray, S

2013-07-01

Full Text Available In recent years, the development of eco-friendly polymeric materials with balanced properties has become a subject of research attention due to concerns with increasing global-warming, carbon-emission, and limited natural resources. Nano...

Consumer purchase intention towards environmentally friendly vehicles: an empirical investigation in Kuala Lumpur, Malaysia.

Science.gov (United States)

Afroz, Rafia; Masud, Muhammad Mehedi; Akhtar, Rulia; Islam, Md Ashraful; Duasa, Jarita Bt

2015-10-01

This paper examines whether attitudes towards electric vehicles (ATEVs), subjective norms (SNs) and perceived behavioural control (PBC) have significant associations with consumer purchase intention (PI) and the purchase behaviour of environmentally friendly vehicles (EFVs). The results from the survey questionnaires are analysed using confirmatory factor analysis (CFA) and structural equation modelling (SEM). The findings of this paper indicate that ATEV, SN and PBC significantly influence PI. This finding also indicates that environmental consequence and individual preferences do not influence the PI of the respondents. We found that Malaysian car owners are largely unaware of the greenhouse effects on the environment or attach to it little importance, which is reflected in their PI towards EFVs. The outcomes of this study could help policymakers design programmes to influence attitudes, subjective norms, perceived behavioural control and purchase behaviour to prevent further air pollution and reduce CO2 emissions from the transportation sector.

Research program for an environmentally-friendly coal utilization system in the Philippines

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Feasibility studies are conducted on the introduction of an environmentally-friendly coal utilization system into the Filipino electric power industry, cement industry, and domestic fuel sector. The studies cover the current status of economy and energy in that country, supply and demand of coal, environmental protection and Government's policy, study of the above-said system relative to its application to the fields of electric power industry, cement industry, and domestic fuel sector, and a study about the effective utilization of Filipino domestic coal by the use of the system. Imported coal is used in the electric power industry because of its cost and quality. It is learned after research, however, that domestic coal will be able to compete against imported coal when some technologies are resorted to, such as those pertinent to denitrification in the furnace, novel low-NOx burner, coal pulverization, and combustion diagnosis. As for the treatment of flue gas, it is concluded that the simplified wet lime/gypsum process will be suitable. It is inferred that the CWM (coal-water mixture) process technology will be effective for the utilization of domestic low-grade coal. (NEDO)

Research program for an environmentally-friendly coal utilization system in the Philippines

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Feasibility studies are conducted on the introduction of an environmentally-friendly coal utilization system into the Filipino electric power industry, cement industry, and domestic fuel sector. The studies cover the current status of economy and energy in that country, supply and demand of coal, environmental protection and Government's policy, study of the above-said system relative to its application to the fields of electric power industry, cement industry, and domestic fuel sector, and a study about the effective utilization of Filipino domestic coal by the use of the system. Imported coal is used in the electric power industry because of its cost and quality. It is learned after research, however, that domestic coal will be able to compete against imported coal when some technologies are resorted to, such as those pertinent to denitrification in the furnace, novel low-NOx burner, coal pulverization, and combustion diagnosis. As for the treatment of flue gas, it is concluded that the simplified wet lime/gypsum process will be suitable. It is inferred that the CWM (coal-water mixture) process technology will be effective for the utilization of domestic low-grade coal. (NEDO)

The environmentally friendly technology for bio fuel production

International Nuclear Information System (INIS)

Bekers, M.; Danilevics, A.; Guriniece, E.; Gulbis, V.

2003-01-01

Full text: Bio fuel production and use have been discussed this time in EC and in Latvia as alternative energy sources. The national resources allow producing liquid fuels - bio diesel and bi oethanol from rape seeds and grain correspondingly. Liquid bio fuels can be recommended especially for auto transport in big towns to reduce the pollution of air. A system for environmentally friendly production of bio fuel from agricultural raw materials has been developed, which permit a complex utilization of byproducts an wastes for obtaining of valuable food-stuffs and industrial products, providing the agricultural production requirements and supporting with local mineral fertilizers. Such a bio fuel production includes the agricultural and industrial productions in a united biotechnological system. Production objects of system interact: the products, by-products and wastes from one object are used as raw materials, auxiliary materials or heat carriers in other system's objects. This integrated agro-industrial production system would allow the production of feeds and chemical products, along with bio fuels. In this work, a model of a system for a conventional administrative rural region is presented, exemplified with the case of Latvia. The model is developed for three forms of bio fuel production, i.e. ethanol, bio diesel and biogas as local energy source. Bio diesel is produced using ethanol as transesterifying agent of rape-seed oil fatty acids. This bio diesel is a blend of rape-seed oil fatty acid ethyl esters (REE) and consists solely from renewable raw materials. The capacity of distillery of system is 40 million litters per year and bio diesel 35000 ton. Important for agriculture is protein reach press cakes the byproduct from bio diesel production (66000 t/y). This byproduct can be exported as well. Biogas reactors of system can be used for utilization of wastes from town if necessary. Recommended bio system occupates up to 150.000 ha of agriculture lands

Effective and Environmentally Friendly Nickel Coating on the Magnesium Alloy

Directory of Open Access Journals (Sweden)

Ivana Škugor Rončević

2016-12-01

Full Text Available The low density and good mechanical properties make magnesium and its alloys attractive construction materials in the electronics, automotive, and aerospace industry, together with application in medicine due to their biocompatibility. Magnesium AZ91D alloy is an alloy with a high content of aluminum, whose mechanical properties overshadow the low corrosion resistance caused by the composition of the alloy and the existence of two phases: α magnesium matrix and β magnesium aluminum intermetallic compound. To improve the corrosion resistance, it is necessary to find an effective protection method for the alloy surface. Knowing and predicting electrochemical processes is an essential for the design and optimization of protective coatings on magnesium and its alloys. In this work, the formations of nickel protective coatings on the magnesium AZ91D alloy surface by electrodeposition and chemical deposition, are presented. For this purpose, environmentally friendly electrolytes were used. The corrosion resistance of the protected alloy was determined in chloride medium using appropriate electrochemical techniques. Characterization of the surface was performed with highly sophisticated surface-analytical methods.

Polyester-Based (Bio)degradable Polymers as Environmentally Friendly Materials for Sustainable Development

Science.gov (United States)

Rydz, Joanna; Sikorska, Wanda; Kyulavska, Mariya; Christova, Darinka

2014-01-01

This review focuses on the polyesters such as polylactide and polyhydroxyalkonoates, as well as polyamides produced from renewable resources, which are currently among the most promising (bio)degradable polymers. Synthetic pathways, favourable properties and utilisation (most important applications) of these attractive polymer families are outlined. Environmental impact and in particular (bio)degradation of aliphatic polyesters, polyamides and related copolymer structures are described in view of the potential applications in various fields. PMID:25551604

Eco-friendly dentistry: Need of future. An overview

Directory of Open Access Journals (Sweden)

Savy Arora

2017-01-01

Full Text Available In today's world, it is very necessary to understand the importance of being eco-friendly in every facet of our lives. The color “green” has healing power and denotes renewal, growth, and hope. “Eco-friendly dentistry” attempts to reduce the detrimental impact of dental practices on the environment and promote environmental awareness and sustainability to patients. This paper attempts to cover all possible aspects of making a dental practice eco-friendly, both in a dental perspective as well as a general perspective. While establishing an eco-friendly dental workplace, the dentist needs to assess his choices in planning the infrastructure and purchasing of equipment and dental materials. Eco-friendly dentistry is a newly evolving practice of dentistry, which encompasses a simultaneous devotion to sustainability, prevention, precaution, and a minimally invasive patient-centric, as well as global-centric treatment. There are two main avenues for implementing eco-friendly dentistry: (1 appropriate policy development and implementation and (2 dentists taking responsibility/ownership in the absence of policies and regulations. Although in some cases, it may take a little extra effort or money; dentists throughout the world are doing their best to reduce the environmental impact of the dental practice. Although the commitment of one small dental office cannot save the planet, certainly, the collective efforts of many small offices as well as large dental hospitals/colleges can ensure that dentists, at least, will not be responsible for destroying it. This article discusses various factors that can be incorporated into dental practice that can help make dentistry eco-friendly.

Integrated studies for automobile wastes management in developing countries; in the concept of environmentally friendly mechanic village.

Science.gov (United States)

Nwachukwu, Michael Amamechi; Feng, Huan; Achilike, Kennedy

2011-07-01

More cities in developing countries now consider mechanic village (MV) as superior to the city wide auto-workshop practice following the increasing influx of used or waste automobile from industrialized nations. This is because of the numerous advantages of the mechanic village concept as a capacity building, and in poverty alleviation. Nevertheless, mechanic villages are poorly developed with no waste management plan. They are now identified with severe to excessive heavy metal soil pollution, causing ecological and public health hazards. This paper has a wider explanation of what it takes for a mechanic village to be environmentally friendly based on spectroscopic analysis and physical measurements conducted in three MVs. Heavy metal concentrations (mg kg( -1)) above background levels in the upper 100 cm soil profiles of the Okigwe, the Orji, and the Nekede MVs in the Imo River basin collectively range 748-70,606 for Fe; 99-1,090 for Pb; 186-600 for Mn; 102-1,001 for Cu; 8-23 for Cd; 4-27 for Cr; and 3-10 for Ni. The most abundant metals of environmental concerns are Pb, Mn, and Cu, in the order of Pb > Mn > Cu. Three-phase storm water treatment, emission testing, minimum safe farming distance (350 m), extended producer responsibility for disposal or recycling of used motor oil, phyto-remediation using local plants, groundwater monitoring wells, and continuous education of mechanics are recommended. Exporters of waste automobiles to developing countries and the United Nations may assist developing countries in establishing environmentally friendly MVs.

Novel environmentally friendly synthesis of superparamagnetic magnetite nanoparticles using mechanochemical effect

International Nuclear Information System (INIS)

Iwasaki, Tomohiro; Kosaka, Kazunori; Watano, Satoru; Yanagida, Takeshi; Kawai, Tomoji

2010-01-01

A novel method for synthesizing superparamagnetic magnetite nanoparticles in water system via coprecipitation under an environmentally friendly condition has been developed. In this method, an almost neutral suspension containing ferrous hydroxide and goethite is used as the starting suspension and subjected to a ball-milling treatment. The product was characterized by transmission electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, dynamic light scattering, superconducting quantum interference device magnetometry, and Moessbauer spectroscopy. The mechanochemical effect generated by the ball-milling treatment promoted the reaction between ferrous hydroxide and goethite even at room temperature, resulting in the formation of homogeneous magnetite nanoparticles. Simultaneously, it also contributed to crystallize the formed magnetite nanoparticles while inhibiting the particle growth. This resulted in the formation of ultrafine magnetite nanoparticles of about 10 nm having a single crystal structure. This method could provide ferromagnetic magnetite nanoparticles with superparamagnetism under the moderate condition without neither heating nor any additives such as surfactant and organic solvent.

CH3NH3Pb1−xMgxI3 perovskites as environmentally friendly photovoltaic materials

Directory of Open Access Journals (Sweden)

Y. D. Zhang

2018-01-01

Full Text Available In an effort to reduce the toxicity of Pb in perovskite solar cells, the band structures, electron and hole effective masses, and electronic and optical properties of the novel perovskites CH3NH3Pb1−xMgxI3 were predicted using density functional theory with the scalar relativistic generalized gradient approximation. The calculation results indicated that the introduction of the Mg component caused the band gaps of the CH3NH3Pb1−xMgxI3 compounds to exceed that of CH3NH3PbI3. The calculated absorption coefficients of the CH3NH3PbI3 and CH3NH3Pb1−xMgxI3 perovskites revealed that substituting 12.5 mol % of the Pb in CH3NH3PbI3 with Mg had little effect on the absorption ability. Surprisingly, it was also found that CH3NH3Pb0.75Mg0.25I3 retained up to 83% of the absorption performance relative to CH3NH3PbI3. This indicates that the amount of toxic Pb used in perovskite solar cells could be reduced by a quarter while retaining over 80% of the light-absorbing ability. In general, these novel CH3NH3Pb1−xMgxI3 (x ≤ 0.25 perovskites represent promising candidates for environmentally friendly light-harvesting materials for use in solar cells.

Solution-Processed Environmentally Friendly Ag2S Colloidal Quantum Dot Solar Cells with Broad Spectral Absorption

Directory of Open Access Journals (Sweden)

Viktor A. Öberg

2017-10-01

Full Text Available A facile heat-up synthesis route is used to synthesize environmentally friendly Ag2S colloidal quantum dots (CQDs that are applied as light absorbing material in solid state p-i-n junction solar cell devices. The as-synthesized Ag2S CQDs have an average size of around 3.5 nm and exhibit broad light absorption covering ultraviolet, visible, and near infrared wavelength regions. The solar cell devices are constructed with a device architecture of FTO/TiO2/Ag2S CQDs/hole transport material (HTM /Au using a solution-processed approach. Different HTMs, N2,N2,N2′,N2′,N7,N7,N7′,N7′-octakis(4-methoxyphenyl-9,9′-spirobi(9H-fluorene-2,2′,7,7′ tetramine (spiro-OMeTAD, poly(3-hexylthiophene-2,5-diyl (P3HT, and poly((2,3-bis(3-octyloxyphenyl-5,8-quinoxalinediyl-2,5-thiophenediyl TQ1 are studied for maximizing the device photovoltaic performance. The solar cell device with P3HT as a hole transport material gives the highest performance and the solar cell exhibit broad spectral absorption. These results indicate that Ag2S CQD have high potential for utilization as environmentally friendly light absorbing materials for solar cell application and that the hole transport material is critical to maximize the solar cell photovoltaic performance.

Shrinking the food-print: A qualitative study into consumer perceptions, experiences and attitudes towards healthy and environmentally friendly food behaviours.

Science.gov (United States)

Hoek, A C; Pearson, D; James, S W; Lawrence, M A; Friel, S

2017-01-01

Internationally, there is increasing recognition of the importance of multilevel policies and actions that address healthy and environmentally friendly food behaviours. However it is not yet clear which actions are most suitable to support consumers to adopt both behaviours concurrently. To this end, we undertook a qualitative study to assess consumer perceptions, experiences and attitudes towards healthy and environmentally friendly foods and four target behaviours: reducing overconsumption of food beyond energy needs, reducing consumption of low-nutrient energy dense foods, eating less animal- and more plant-derived foods, and reducing food waste. Online in-depth interviews were held with 29 Australian food shoppers representing different levels of involvement with health and environment in daily food choices. The results indicate that compared to health, the relationship between food and the environment is rarely considered by consumers. The four target food behaviours were primarily associated and motivated by an impact on health, except for not wasting foods. Participants had the most positive attitude and highest motivation for eating less processed and packaged foods, mostly to avoid excessive packaging and 'chemicals' in foods. This was followed by the behaviours reducing food waste and overconsumption. Conversely, there was a predominantly negative attitude towards, and low motivation for, eating less animal-derived products and more plant based foods. Overall, consumers found a joined concept of healthy and environmentally friendly foods an acceptable idea. We recommend that health should remain the overarching principle for policies and actions concerned with shifting consumer behaviours, as this personal benefit appears to have a greater potential to support behaviour change. Future consumer focused work could pay attention to framing behavioural messages, providing intermediate behavioural goals, and a multiple target approach to change habitual

Slip flow coefficient analysis in water hydraulics gear pump for environmental friendly application

International Nuclear Information System (INIS)

Yusof, A A; Wasbari, F; Zakaria, M S; Ibrahim, M Q

2013-01-01

Water hydraulics is the sustainable option in developing fluid power systems with environmental friendly approach. Therefore, an investigation on water-based external gear pump application is being conducted, as a low cost solution in the shifting effort of using water, instead of traditional oil hydraulics in fluid power application. As the gear pump is affected by fluid viscosity, an evaluation has been conducted on the slip flow coefficient, in order to understand to what extent the spur gear pump can be used with water-based hydraulic fluid. In this paper, the results of a simulated study of variable-speed fixed displacement gear pump are presented. The slip flow coefficient varies from rotational speed of 250 RPM to 3500 RPM, and provides volumetric efficiency ranges from 9 % to 97% accordingly

Removing environmental organic pollutants with bioremediation and phytoremediation.

Science.gov (United States)

Kang, Jun Won

2014-06-01

Hazardous organic pollutants represent a threat to human, animal, and environmental health. If left unmanaged, these pollutants could cause concern. Many researchers have stepped up efforts to find more sustainable and cost-effective alternatives to using hazardous chemicals and treatments to remove existing harmful pollutants. Environmental biotechnology, such as bioremediation and phytoremediation, is a promising field that utilizes natural resources including microbes and plants to eliminate toxic organic contaminants. This technology offers an attractive alternative to other conventional remediation processes because of its relatively low cost and environmentally-friendly method. This review discusses current biological technologies for the removal of organic contaminants, including chlorinated hydrocarbons, focusing on their limitation and recent efforts to correct the drawbacks.

Environmentally Friendly Coating Technology for Autonomous Corrosion Control

Science.gov (United States)

Calle, Luz M.; Li, Wenyan; Buhrow, Jerry W.; Johnsey, Marissa N.; Jolley, Scott T.; Pearman, Benjamin P.; Zhang, Xuejun; Fitzpatrick, Lilliana; Gillis, Mathew; Blanton, Michael;

Association and Diffusion of Li(+) in Carboxymethylcellulose Solutions for Environmentally Friendly Li-ion Batteries.

Science.gov (United States)

Casalegno, Mosè; Castiglione, Franca; Passarello, Marco; Mele, Andrea; Passerini, Stefano; Raos, Guido

2016-07-21

Carboxymethylcellulose (CMC) has been proposed as a polymeric binder for electrodes in environmentally friendly Li-ion batteries. Its physical properties and interaction with Li(+) ions in water are interesting not only from the point of view of electrode preparation-processability in water is one of the main reasons for its environmental friendliness-but also for its possible application in aqueous Li-ion batteries. We combine molecular dynamics simulations and variable-time pulsed field gradient spin-echo (PFGSE) NMR spectroscopy to investigate Li(+) transport in CMC-based solutions. Both the simulations and experimental results show that, at concentrations at which Li-CMC has a gel-like consistency, the Li(+) diffusion coefficient is still very close to that in water. These Li(+) ions interact preferentially with the carboxylate groups of CMC, giving rise to a rich variety of coordination patterns. However, the diffusion of Li(+) in these systems is essentially unrestricted, with a fast, nanosecond-scale exchange of the ions between CMC and the aqueous environment. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

An environmentally friendly procedure to obtain flavonoids from Brazilian citrus waste

Energy Technology Data Exchange (ETDEWEB)

Bellete, Barbara S.; Ramin, Luize Z.; Porto, Deyvid; Ribeiro, Alany I.; Forim, Moacir R.; Zuin, Vânia G.; Fernandes, João B.; Silva, Maria Fátima G.F., E-mail: barbarabellete@gmail.com [Departamento de Química, Universidade Federal de São Carlos, SP (Brazil)

2018-05-01

Currently, most food waste is used as animal feed and this process does not take advantage of the available chemical composition. A Brazilian example is the citrus fruit processing wastes (CFPW), which have begun to draw attention due to their biological importance. In order to access the main compounds of this matrix, an efficient and environmentally friendly procedure was tested. From this extract, flavonoids as naringenin, hesperitin, chrysoeriol, sinensetin, 3,5,6,7,3',4'-hexamethoxyflavone, nobiletin, 5-methoxysalvigenin, 3,5,6,7,8,3',4'-heptamethoxyflavone, 3,5,6,7,4'-pentamethoxyflavone and isosakuranetin were identified by high performance liquid chromatography (HPLC-UV), liquid chromatography-mass spectrometry (LC-MS) and liquid chromatography-nuclear magnetic resonance (LC-NMR). This study describes the potential use of citrus waste as a source of biologically active compounds. The extraction method proposed for this work was not expensive and the flavonoids were obtained in large amounts, thus, this extraction method is being developed using pilot plant scale-up techniques and will soon be available to the industry at a low cost. (author)

An environmentally friendly procedure to obtain flavonoids from Brazilian citrus waste

International Nuclear Information System (INIS)

Bellete, Barbara S.; Ramin, Luize Z.; Porto, Deyvid; Ribeiro, Alany I.; Forim, Moacir R.; Zuin, Vânia G.; Fernandes, João B.; Silva, Maria Fátima G.F.

2018-01-01

Currently, most food waste is used as animal feed and this process does not take advantage of the available chemical composition. A Brazilian example is the citrus fruit processing wastes (CFPW), which have begun to draw attention due to their biological importance. In order to access the main compounds of this matrix, an efficient and environmentally friendly procedure was tested. From this extract, flavonoids as naringenin, hesperitin, chrysoeriol, sinensetin, 3,5,6,7,3',4'-hexamethoxyflavone, nobiletin, 5-methoxysalvigenin, 3,5,6,7,8,3',4'-heptamethoxyflavone, 3,5,6,7,4'-pentamethoxyflavone and isosakuranetin were identified by high performance liquid chromatography (HPLC-UV), liquid chromatography-mass spectrometry (LC-MS) and liquid chromatography-nuclear magnetic resonance (LC-NMR). This study describes the potential use of citrus waste as a source of biologically active compounds. The extraction method proposed for this work was not expensive and the flavonoids were obtained in large amounts, thus, this extraction method is being developed using pilot plant scale-up techniques and will soon be available to the industry at a low cost. (author)

An Environmental Perspective on Clothing Consumption

DEFF Research Database (Denmark)

Gwozdz, Wencke; Nielsen, Kristian S.; Mueller, Tina

2017-01-01

Efforts to decrease the environmental impact of today’s clothing industry across the entire process of production, purchase, maintenance, and disposal can be driven by either suppliers or consumers. Changing the behavior of the latter, however, requires an understanding of current clothing...... consumption patterns—a currently under-researched area. We therefore shed more light on these patterns in the purchase, use and maintenance, and discard phases by analyzing unique data on 4617 adult consumers (aged 18–65) from Germany, Poland, Sweden, and the U.S., who we divide into five segments based......’ different reported purchase behavior and a varying openness to alternative business models, we identify differences in willingness to pay for clothing made of material that is more environmentally friendly than conventional fabrics. These observations suggest several promising directions for environmental...

Environmentally friendly chemoselective oxidation of primary aliphatic amines by using a biomimetic electrocatalytic system.

Science.gov (United States)

Largeron, Martine; Chiaroni, Angèle; Fleury, Maurice-Bernard

2008-01-01

Environmentally friendly oxidation of primary aliphatic amines to imines has been successfully achieved, under metal-free conditions, by the use of diverse electrogenerated o-azaquinone mediators. High catalytic performance, together with high chemoselectivity, were observed with electron-poor o-azaquinone catalysts generated from 2-aminoresorcinol derivatives. Similar to copper amine oxidase enzymes, these mediators exhibited lower reactivity toward alpha-branched primary amines and no reactivity toward secondary amines. In the case of 3,4-aminophenol derivatives lacking a 2-hydroxy group, the generated o-azaquinone species failed to catalyze the oxidation of the amine to the corresponding imine. Further mechanistic considerations allowed a rationalization of the crucial role of the 2-hydroxy group in converting a catalytically inert species into a highly effective biomimetic catalyst.

Industrial Implementation of Environmentally Friendly Nanometal Electroplating Process for Chromium and Copper Beryllium Replacement using Low Cost Pulse Current Power Supplies

Science.gov (United States)

2014-09-10

FINAL REPORT Industrial Implementation of Environmentally Friendly Nanometal Electroplating Process for Chromium and Copper Beryllium...35 3.2 Phase II – Development/Verification that Nanotechnology Based Electroplating Process to Replace EHC/Cu-Be Processes are Compatible With...36 3.3 Phase III – Development of 200kW Power Supply and Compatible Nanostructured Electroplating Processed for Commercialization

Development and Pilot Testing of a Bilingual Environmental Health Assessment Tool to Promote Asthma-friendly Childcares.

Science.gov (United States)

Evans-Agnew, Robin A; Postma, Julie; Camacho, Ariana Ochoa; Hershberg, Rachel M; Trujilio, Elsa; Tinajera, Maria

2018-01-01

Childhood marks the highest risk for allergic sensitization to asthma triggers. Hispanic/Latino children are at higher risk for hospitalization for asthma than non-Hispanic White children. Childcare providers lack knowledge about reducing asthma triggers. The purpose of this paper is to describe a community-based participatory research (CBPR) initiative aimed at developing and pilot testing a bilingual walk-through assessment tool for asthma-friendly childcare environments. Ten Latina mothers of children with asthma living in the Pacific Northwest collaborated with research partners to develop and pilot test a Childcare Environmental Health (CEH) assessment walk-through survey.Results and Lessons Learned: The women innovated the survey with photography and structural examinations of stress and provision of basic needs. The survey tool identified environmental threats to asthma in all three childcares surveyed. Parents are well-positioned to build trust with childcare providers, assess asthma triggers, and recommend practical mitigation strategies.

New ADAC centre cools and heats environmental-friendly. Concrete core tempering; Neue ADAC-Zentrale kuehlt und heizt umweltvertraeglich. Betonkerntemperierung

Energy Technology Data Exchange (ETDEWEB)

Anon,

2010-12-15

At present, the new centre of the General German Automobile Association (ADAC) arises in Munich's suburb Sendling/Westpark. In summer 2011, nearly 2,400 coworkers of ADAC so far distributed over six locations in Munich shall work together in the new office building. So that they feel well in this new building, Rehau AG (Rehau, Federal Republic of Germany) supplies an environmental-friendly heating and cooling of the building by means of concrete core tempering.

Note: Fabrication of a fast-response and user-friendly environmental chamber for atomic force microscopes

Energy Technology Data Exchange (ETDEWEB)

Ji, Yanfeng; Hui, Fei; Shi, Yuanyuan; Han, Tingting; Song, Xiaoxue; Pan, Chengbin; Lanza, Mario, E-mail: mlanza@suda.edu.cn [Institute of Functional Nano & Soft Materials, Soochow University, Collaborative Innovation Center of Suzhou Nano Science & Technology, 199 Ren-Ai Road, Suzhou 215123 (China)

2015-10-15

The atomic force microscope is one of the most widespread tools in science, but many suppliers do not provide a competitive solution to make experiments in controlled atmospheres. Here, we provide a solution to this problem by fabricating a fast-response and user-friendly environmental chamber. We corroborate the correct functioning of the chamber by studying the formation of local anodic oxidation on a silicon sample (biased under opposite polarities), an effect that can be suppressed by measuring in a dry nitrogen atmosphere. The usefulness of this chamber goes beyond the example here presented, and it could be used in many other fields of science, including physics, mechanics, microelectronics, nanotechnology, medicine, and biology.

Analisa Perbedaan Eco-friendly Attitude Dan Eco-friendly Intention Antara Turis Lokal Dan Turis Asing Terhadap Green

OpenAIRE

Jokom, Regina; Kristanti, Monika

2014-01-01

The increasing concern for environmental degradation caused many people to pay more attention to the green practice in the industry including hotel. Majority of hotel chains have adopted environmental programs and labeled as green hotel. This study examines the significant differences between local tourist and foreign tourist regarding ecofriendly attitude and eco-friendly intention toward green hotel. Questionnaires were distributed to 120 localtourists and 120 foreign tourists In Juanda...

Environmentally Friendly Plasma-Treated PEDOT:PSS as Electrodes for ITO-Free Perovskite Solar Cells.

Science.gov (United States)

Vaagensmith, Bjorn; Reza, Khan Mamun; Hasan, Md Nazmul; Elbohy, Hytham; Adhikari, Nirmal; Dubey, Ashish; Kantack, Nick; Gaml, Eman; Qiao, Qiquan

2017-10-18

Solution processed poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) transparent electrodes (TEs) offer great potential as a low cost alternative to expensive indium tin oxide (ITO). However, strong acids are typically used for enhancing the conductivity of PEDOT:PSS TEs, which produce processing complexity and environmental issues. This work presents an environmentally friendly acid free approach to enhance the conductivity of PEDOT:PSS using a light oxygen plasma treatment, in addition to solvent blend additives and post treatments. The plasma treatment was found to significantly reduce the sheet resistance of PEDOT:PSS TEs from 85 to as low as 15 Ω sq -1 , which translates to the highest reported conductivity of 5012 S/cm for PEDOT:PSS TEs. The plasma treated PEDOT:PSS TE resulted in an ITO-free perovskite solar cell efficiency of 10.5%, which is the highest reported efficiency for ITO-free perovskite solar cells with a PEDOT:PSS electrode that excludes the use of acid treatments. This research presents the first demonstration of this technology. Moreover, the PEDOT:PSS TEs enabled better charge extraction from the perovskite solar cells and reduced hysteresis in the current density-voltage (J-V) curves.

Natural cork agglomerate employed as an environmentally friendly solution for quiet sandwich composites.

Science.gov (United States)

Sargianis, James; Kim, Hyung-ick; Suhr, Jonghwan

2012-01-01

Carbon fiber-synthetic foam core sandwich composites are widely used for many structural applications due to their superior mechanical performance and low weight. Unfortunately these structures typically have very poor acoustic performance. There is increasingly growing demand in mitigating this noise issue in sandwich composite structures. This study shows that marrying carbon fiber composites with natural cork in a sandwich structure provides a synergistic effect yielding a noise-free sandwich composite structure without the sacrifice of mechanical performance or weight. Moreover the cork-core sandwich composites boast a 250% improvement in damping performance, providing increased durability and lifetime operation. Additionally as the world seeks environmentally friendly materials, the harvesting of cork is a natural, renewable process which reduces subsequent carbon footprints. Such a transition from synthetic foam cores to natural cork cores could provide unprecedented improvements in acoustic and vibrational performance in applications such as aircraft cabins or wind turbine blades.

Analisa Eco-friendly Attitudes Dan Eco-friendly Behavior Terhadap Eco-friendly Intention Green Hotel Di Indonesia

OpenAIRE

Silvia, Lanny; Rudijanto, Diana Gabriela; Kristanti, Monika

2017-01-01

Kesadaran masyarakat akan lingkungan yang semakin meningkat membuat masyarakat gencar mencari hotel yang ramah lingkungan dibandingkan dengan hotel konvensional. Penelitian ini bertujuan untuk mengetahui perbedaan eco-friendly attitude, eco- friendly behavior, dan eco-friendly intention konsumen generasi x dan generasi y terhadap green hotel di Indonesia dan apakah eco-friendly attitudes dan eco-friendly behavior berpengaruh signifikan terhadap eco-friendly intention. Total responden dalam pe...

Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in the Philippines; Kankyo chowagata sekitan riyo system kanosei chosa. Philippines ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Grasping the present situation of coal utilization technology in the Philippines, the paper proposed a feasibility study of introduction of the environmentally friendly type coal utilization system which seems to be needed in the future. (1) Introduction of the environmentally friendly type coal utilization system in the electric power generation sector: there are only four full-scale running coal thermal power plants in the Philippines. In the future, several coal thermal plants are planned to be constructed by 2005, but for the new installation, it is desirable to adopt fluidized bed boilers with wide application to coal kinds. In case of 0.3-1.0 million MW class plants, it is planned to adopt high grade import coals, and it will be natural to fire pulverized coal. For the processing of flue gas, it is a must to install desulfurization facilities and smoke/soot removal devices. (2) Utilization/development of domestic low grade coals: at the mine-mouth generating plant, it is necessary to investigate the economically minable amount of coal, confirm productivity, survey coal quality, etc., and select boiler. As to coal briquetting technology, it is necessary to examine coal quality for tests and make a thorough study of what technology is most suitable. 50 figs., 78 tabs.

Environmentally Friendly Consumer

DEFF Research Database (Denmark)

Reijonen, Satu

2011-01-01

on the green consumer: cultural determinism, psycho-socio-demographic determinism and calculative determinism. An explanation of the green consumer in these terms, however, loses sight of the emergence and processuality of consumer behaviour. Process oriented constructionism, by contrast, is useful to recover...... these important aspects. This paper suggests a research agenda focused on socio-material processes and situated actions that lead to the emergence and stabilization of a particular type of consumer behaviour.......Several attempts have been made by academics in the past to explain the so-called ‘environmentally conscious’ consumer. These explanations share an important feature, namely determinism. This paper identifies three different sources of determinism that are distinguished in recent literature...

Critical friends: A way to develop preceptor competence?

Science.gov (United States)

Carlson, Elisabeth

2015-11-01

Preceptorship entails for nurses to create a supportive learning and working climate where students or newcomers are given opportunities to develop professional competence. However, being a skilled and experienced nurse does not automatically turn the professional into a skilled educator as teaching of a subject is a whole different story. Preceptors need to continuously and critically reflect on their practices in order to facilitate the development of professional pedagogical competence. Critical friends are colleagues with comparable educational background evaluating the work of each other. The relationship should rely on friendship and mutual trust, adding new dimensions to the reflective process. Being engaged in a critical friendship allows the "friends" to become aware of their own shortcomings which can then be reflected on in relation to clinical as well as pedagogical practices. Being and having a critical friend might be one promising way forward for preceptors to develop pedagogical and professional competence. Copyright © 2014 Elsevier Ltd. All rights reserved.

Moral intensity and climate-friendly food choices.

Science.gov (United States)

Mäkiniemi, Jaana-Piia; Vainio, Annukka

2013-07-01

By changing individual food consumption patterns, it might be possible to reduce greenhouse gas emissions associated with climate change. The aim of the current study was to examine how perceptions of the moral intensity of climate change are related to climate friendly-food choices. The participants were 350 Finnish university students in the social and behavioral sciences who completed a questionnaire during class. The results indicated that moral perceptions mainly affected the moral evaluation and intentions to make climate-friendly food choices. We suggest that the results can be used to promote climate-friendly food choices, for example, by increasing the recognition of climate change as a moral imperative and by combining environmental motives with other relevant food choice motives. Copyright © 2013 Elsevier Ltd. All rights reserved.

Candidate eco-friendly gas mixtures for MPGDs

Science.gov (United States)

Benussi, L.; Bianco, S.; Saviano, G.; Muhammad, S.; Piccolo, D.; Ferrini, M.; Parvis, M.; Grassini, S.; Colafranceschi, S.; Kjølbro, J.; Sharma, A.; Yang, D.; Chen, G.; Ban, Y.; Li, Q.

2018-02-01

Modern gas detectors for detection of particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This review studies properties of potential eco-friendly gas candidate replacements.

The copepod Tigriopus: A promising marine model organism for ecotoxicology and environmental genomics

Energy Technology Data Exchange (ETDEWEB)

Raisuddin, Sheikh [Department of Chemistry and the National Research Lab of Marine Molecular and Environmental Bioscience, College of Natural Sciences, Hanyang University, Seoul 133-791 (Korea, Republic of); Kwok, Kevin W.H. [Swire Institute of Marine Science, Department of Ecology and Biodiversity, University of Hong Kong, Pokfulam, Hong Kong (China); Leung, Kenneth M.Y. [Swire Institute of Marine Science, Department of Ecology and Biodiversity, University of Hong Kong, Pokfulam, Hong Kong (China); Schlenk, Daniel [Department of Environmental Sciences, University of California, Riverside, CA 92521 (United States); Lee, Jae-Seong [Department of Chemistry and the National Research Lab of Marine Molecular and Environmental Bioscience, College of Natural Sciences, Hanyang University, Seoul 133-791 (Korea, Republic of)]. E-mail: jslee2@hanyang.ac.kr

2007-07-20

There is an increasing body of evidence to support the significant role of invertebrates in assessing impacts of environmental contaminants on marine ecosystems. Therefore, in recent years massive efforts have been directed to identify viable and ecologically relevant invertebrate toxicity testing models. Tigriopus, a harpacticoid copepod has a number of promising characteristics which make it a candidate worth consideration in such efforts. Tigriopus and other copepods are widely distributed and ecologically important organisms. Their position in marine food chains is very prominent, especially with regard to the transfer of energy. Copepods also play an important role in the transportation of aquatic pollutants across the food chains. In recent years there has been a phenomenal increase in the knowledge base of Tigriopus spp., particularly in the areas of their ecology, geophylogeny, genomics and their behavioural, biochemical and molecular responses following exposure to environmental stressors and chemicals. Sequences of a number of important marker genes have been studied in various Tigriopus spp., notably T. californicus and T. japonicus. These genes belong to normal biophysiological functions (e.g. electron transport system enzymes) as well as stress and toxic chemical exposure responses (heat shock protein 20, glutathione reductase, glutathione S-transferase). Recently, 40,740 expressed sequenced tags (ESTs) from T. japonicus, have been sequenced and of them, 5673 ESTs showed significant hits (E-value, >1.0E-05) to the red flour beetle Tribolium genome database. Metals and organic pollutants such as antifouling agents, pesticides, polycyclic aromatic hydrocarbons (PAH) and polychrlorinated biphenyls (PCB) have shown reproducible biological responses when tested in Tigriopus spp. Promising results have been obtained when Tigriopus was used for assessment of risk associated with exposure to endocrine-disrupting chemicals (EDCs). Application of environmental

The copepod Tigriopus: A promising marine model organism for ecotoxicology and environmental genomics

International Nuclear Information System (INIS)

Raisuddin, Sheikh; Kwok, Kevin W.H.; Leung, Kenneth M.Y.; Schlenk, Daniel; Lee, Jae-Seong

2007-01-01

There is an increasing body of evidence to support the significant role of invertebrates in assessing impacts of environmental contaminants on marine ecosystems. Therefore, in recent years massive efforts have been directed to identify viable and ecologically relevant invertebrate toxicity testing models. Tigriopus, a harpacticoid copepod has a number of promising characteristics which make it a candidate worth consideration in such efforts. Tigriopus and other copepods are widely distributed and ecologically important organisms. Their position in marine food chains is very prominent, especially with regard to the transfer of energy. Copepods also play an important role in the transportation of aquatic pollutants across the food chains. In recent years there has been a phenomenal increase in the knowledge base of Tigriopus spp., particularly in the areas of their ecology, geophylogeny, genomics and their behavioural, biochemical and molecular responses following exposure to environmental stressors and chemicals. Sequences of a number of important marker genes have been studied in various Tigriopus spp., notably T. californicus and T. japonicus. These genes belong to normal biophysiological functions (e.g. electron transport system enzymes) as well as stress and toxic chemical exposure responses (heat shock protein 20, glutathione reductase, glutathione S-transferase). Recently, 40,740 expressed sequenced tags (ESTs) from T. japonicus, have been sequenced and of them, 5673 ESTs showed significant hits (E-value, >1.0E-05) to the red flour beetle Tribolium genome database. Metals and organic pollutants such as antifouling agents, pesticides, polycyclic aromatic hydrocarbons (PAH) and polychrlorinated biphenyls (PCB) have shown reproducible biological responses when tested in Tigriopus spp. Promising results have been obtained when Tigriopus was used for assessment of risk associated with exposure to endocrine-disrupting chemicals (EDCs). Application of environmental

NASA's Beachside Corrosion Test Site and Current Environmentally Friendly Corrosion Control Initiatives

Science.gov (United States)

Russell, Richard W.; Calle, Luz Marina; Johnston, Frederick; Montgomery, Eliza L.; Curran, Jerome P.; Kolody, Mark R.

2013-01-01

NASA began corrosion studies at the Kennedy Space Center (KSC) in 1966 during the Gemini/Apollo Programs with the evaluation of long-term corrosion protective coatings for carbon steel. KSC's Beachside Corrosion Test Site (BCTS), which has been documented by the American Society of Materials (ASM) as one of the most corrosive, naturally occurring, environments in the world, was established at that time. With the introduction of the Space Shuttle in 1981, the already highly corrosive conditions at the launch pad were rendered even more severe by the acid ic exhaust from the solid rocket boosters. In the years that followed, numerous studies have identified materials, coatings, and maintenance procedures for launch hardware and equipment exposed to the highly corrosive environment at the launch pad. This paper presents a historical overview of over 45 years of corrosion and coating evaluation studies and a description of the BCTS's current capabilities. Additionally, current research and testing programs involving chromium free coatings, environmentally friendly corrosion preventative compounds, and alternates to nitric acid passivation will be discussed.

Phytofilter - environmental friendly solution for purification of surface plate from urbanized territories

Science.gov (United States)

Ruchkinova, O.; Shchuckin, I.

2017-06-01

Its proved, that phytofilters are environmental friendly solution of problem of purification of surface plate from urbanized territories. Phytofilters answer the nowadays purposes to systems of purification of land drainage. The main problem of it is restrictions, connecter with its use in the conditions of cold temperature. Manufactured a technology and mechanism, which provide a whole-year purification of surface plate and its storage. Experimentally stated optimal makeup of filtering load: peat, zeolite and sand in per cent of volume, which provides defined hydraulic characteristics. Stated sorbate and ion-selective volume of complex filtering load of ordered composition in dynamic conditions. Estimated dependences of exit concentrations of oil products and heavy metals on temperature by filtering through complex filtering load of ordered composition. Defined effectiveness of purification at phytofiltering installation. Fixed an influence of embryophytes on process of phytogeneration and capacity of filtering load. Recommended swamp iris, mace reed and reed grass. Manufactured phytofilter calculation methodology. Calculated economic effect from use of phytofiltration technology in comparison with traditional block-modular installations.

Environment polluting conventional chemical control compared to an environmentally friendly IPM approach for control of diamondback moth, Plutella xylostella (L.), in China: a review.

Science.gov (United States)

Shakeel, Muhammad; Farooq, Muhammad; Nasim, Wajid; Akram, Waseem; Khan, Fawad Zafar Ahmad; Jaleel, Waqar; Zhu, Xun; Yin, Haichen; Li, Shuzhong; Fahad, Shah; Hussain, Saddam; Chauhan, Bhagirath Singh; Jin, Fengliang

2017-06-01

The diamondback moth, Plutella xylostella, is recognized as a widely distributed destructive insect pest of Brassica worldwide. The management of this pest is a serious issue, and an estimated annual cost of its management has reached approximately US$4 billion. Despite the fact that chemicals are a serious threat to the environment, lots of chemicals are applied for controlling various insect pests especially P. xylostella. An overreliance on chemical control has not only led to the evolution of resistance to insecticides and to a reduction of natural enemies but also has polluted various components of water, air, and soil ecosystem. In the present scenario, there is a need to implement an environmentally friendly integrated pest management (IPM) approach with new management tactics (microbial control, biological control, cultural control, mating disruption, insecticide rotation strategies, and plant resistance) for an alternative to chemical control. The IPM approach is not only economically beneficial but also reduces the environmental and health risks. The present review synthesizes published information on the insecticide resistance against P. xylostella and emphasizes on adopting an alternative environmentally friendly IPM approach for controlling P. xylostella in China.

Fungal treatment: a prospective process for eco-friendly bioremediation of wastewater sludge

International Nuclear Information System (INIS)

Molla, A. H.; Fakhru'l-Razi, A.

2009-01-01

None of the conventional techniques is safe and environmental friendly for wastewaters/sludge disposal. A sustainable, safe and environmental friendly biological technique is a great apprehension to the relevant scientists. Since the fungal treatment was exercised to evaluate its potentially for sustainable bioseparation and bioremediation of wastewater. Bioseparation and bioremediation of wastewater sludge by fungal inoculation implied the decreasing of bio solids, total suspended solids (TSS), turbidity, chemical oxygen demand (COD) and specific resistance to filtration (SRF) of wastewater. (Author)

The “Green Jobs” Fantasy: Why the Economic and Environmental Reality Can Never Live Up to the Political Promise

OpenAIRE

Jennifer Winter; Michal C. Moore

2013-01-01

Agriculture is one of the least “green” — that is, the least environmentally friendly — sectors in Canada, based on its energy-use intensity and greenhouse gas emissions intensity. But agriculture is also the “greenest” sector in Canada, according to one measure that calculates the proportion of “green employment” in various industries. Welcome to the world of “green jobs,” where vague definitions often give energy-intensive, carbon-heavy industries a “green” stamp of approval. Examples inclu...

The Effects of Mothers' Educational Levels on University Students' Environmental Protection Commitments and Environmental Behaviors

Science.gov (United States)

Saraçli, Sinan; Yilmaz, Veysel; Arslan, Talha

2014-01-01

Problem Statement: The damage caused by recent environmental problems has led to increased environmental concerns and the development of environment-friendly consumption behaviours in almost every society. Environment-friendly consumption involves the consideration of environmental benefits by minimizing any damage done to the environment at all…

Environmentally Sustainable Aluminum-Coordinated Poly(tetrahydroxybenzoquinone) as a Promising Cathode for Sodium Ion Batteries.

Science.gov (United States)

Kim, Hee Joong; Kim, Youngjin; Shim, Jimin; Jung, Kyung Hwa; Jung, Min Soo; Kim, Hanseul; Lee, Jong-Chan; Lee, Kyu Tae

2018-01-31

Na-ion batteries are attractive as an alternative to Li-ion batteries because of their lower cost. Organic compounds have been considered as promising electrode materials due to their environmental friendliness and molecular diversity. Herein, aluminum-coordinated poly(tetrahydroxybenzoquinone) (P(THBQ-Al)), one of the coordination polymers, is introduced for the first time as a promising cathode for Na-ion batteries. P(THBQ-Al) is synthesized through a facile coordination reaction between benzoquinonedihydroxydiolate (C 6 O 6 H 2 2- ) and Al 3+ as ligands and complex metal ions, respectively. Tetrahydroxybenzoquinone is environmentally sustainable, because it can be obtained from natural resources such as orange peels. Benzoquinonedihydroxydiolate also contributes to delivering high reversible capacity, because each benzoquinonedihydroxydiolate unit is capable of two electron reactions through the sodiation of its conjugated carbonyl groups. Electrochemically inactive Al 3+ improves the structural stability of P(THBQ-Al) during cycling because of a lack of a change in its oxidation state. Moreover, P(THBQ-Al) is thermally stable and insoluble in nonaqueous electrolytes. These result in excellent electrochemical performance including a high reversible capacity of 113 mA h g -1 and stable cycle performance with negligible capacity fading over 100 cycles. Moreover, the reaction mechanism of P(THBQ-Al) is clarified through ex situ XPS and IR analyses, in which the reversible sodiation of C═O into C-O-Na is observed.

Performance Analysis of Solar Combined Ejector-Vapor Compression Cycle Using Environmental Friendly Refrigerants

Directory of Open Access Journals (Sweden)

A. B. Kasaeian

2013-04-01

Full Text Available In this study, a new model of a solar combined ejector-vapor compression refrigeration system has been considered. The system is equipped with an internal heat exchanger to enhance the performance of the cycle. The effects of working fluid and operating conditions on the system performance including COP, entrainment ratio (ω, compression ratio (rp and exergy efficiency were investigated. Some working fluids suggested are: R114, R141b, R123, R245fa, R600a, R365mfc, R1234ze(e and R1234ze(z. The results show that R114 and R1234ze(e yield the highest COP and exergy efficiency followed by R123, R245fa, R365mfc, R141b, R152a and R600a. It is noticed that the COP value of the new solar ejector-vapor compression refrigeration cycle is higher than that of the conventional ejector cycle with R1234ze(e for all operating conditions. This paper also demonstrates that R1234ze(e will be a suitable refrigerant in the solar combined ejector-vapor compression refrigeration system, due to its environmental friendly properties and better performance. ABSTRAK: Kajian ini menganalisa model baru sistem penyejukan mampatan gabungan ejektor-wap solar.Sistem ini dilengkapi dengan penukar haba dalaman untuk meningkatkan prestasi kitaran.Kesan bendalir bekerja dan keadaan operasi pada prestasi sistem termasuk COP, nisbah pemerangkapan (ω, nisbah mampatan (rp dan kecekapan eksergi telah disiasat.Beberapa bendalir bekerja yang dicadangkan adalah: R114, R141b, R123, R245fa, R600a, R365mfc, R1234ze(e dan R1234ze(z.Hasil kajian menunjukkan R114 dan R1234ze(e menghasilkan COP dan kecekapan eksergi tertinggi diikuti oleh R123, R245fa, R365mfc, R141b, R152a dan R600a.Didapati nilai COP kitaran penyejukan mampatan bagi ejektor-wap solar baru adalah lebih tinggi daripada kitaran ejektor konvensional dengan R1234ze(e bagi semua keadaan operasi.Kertas kerja ini juga menunjukkan bahawa R1234ze(e boleh menjadi penyejuk yang sesuai dalam sistem penyejukan mampatan gabungan ejektor

Decision-Making Tool for Cost-Efficient and Environmentally Friendly Wood Mobilisation

Directory of Open Access Journals (Sweden)

Matevž Triplat

2015-06-01

Full Text Available Background and Purpose: With development of forest management technologies, the efficiency of wood production was significantly improved, and thus the impact on forests has changed as well. The article presents a practical decision-making tool for selection of most suitable harvesting system, considering given terrain as well as expected soil conditions on harvesting sites. The decision-making tool should support cost-efficient and environmentally friendly mobilisation of wood. Materials and Methods: The presented decision-making tool is based on ground bearing capacities (relevant environmental parameter and nominal ground pressure (harvesting system characteristics. Soil and terrain (slope characteristics were taken into account for selection of the most suitable harvesting system. Three-step methodological approach was suggested, where soil and terrain conditions were defined in first step, while harvesting system were described using wood process charts (“functiogramms” in second step. In final step ecological and technological requirements were matched. Results: To exemplify the three-step methodology, a decision-making tool was prepared for the three selected harvesting systems. The proposed harvesting systems differ in technological, ecological and economic aspects, but each is limited by at least one of the aspect. Conclusions: The decision-making tool in combination with the presented wood process charts (“functiogramms” can simplify and facilitate forest production planning, although it can also be used in case of unforeseen event e.g. changing of soil moisture, machinery failure and insufficient current capacities. Considering the envisaged quantities and types of forest wooden assortments, it is possible to use the decision-making tool for a basic selection of most appropriate harvesting systems. The main idea behind the suggested three step methodological approach is that forest workers can prepare individual decision

Choice of organic foods is related to perceived consequences for human health and to environmentally friendly behaviour.

Science.gov (United States)

Magnusson, Maria K; Arvola, Anne; Hursti, Ulla Kaisa Koivisto; Aberg, Lars; Sjödén, Per-Olow

2003-04-01

We designed a questionnaire concerned with attitudes and behaviour towards organic foods, environmentally friendly behaviour (EFB), and perceived consequences of organic food choice in terms of human health, the environment and animal welfare. It was mailed in 1998 to a random nation-wide sample of 2000 Swedish citizens, ages 18-65 years, and 1154 (58%) responded. Self-reported purchase of organic foods was most strongly related to perceived benefit for human health. Performance of EFBs such as refraining from car driving was also a good predictor of purchase frequency. The results indicate that egoistic motives are better predictors of the purchase of organic foods than are altruistic motives.

Microbial Tyrosinases: Promising Enzymes for Pharmaceutical, Food Bioprocessing, and Environmental Industry

Directory of Open Access Journals (Sweden)

Kamal Uddin Zaidi

2014-01-01

Full Text Available Tyrosinase is a natural enzyme and is often purified to only a low degree and it is involved in a variety of functions which mainly catalyse the o-hydroxylation of monophenols into their corresponding o-diphenols and the oxidation of o-diphenols to o-quinones using molecular oxygen, which then polymerizes to form brown or black pigments. The synthesis of o-diphenols is a potentially valuable catalytic ability and thus tyrosinase has attracted a lot of attention with respect to industrial applications. In environmental technology it is used for the detoxification of phenol-containing wastewaters and contaminated soils, as biosensors for phenol monitoring, and for the production of L-DOPA in pharmaceutical industries, and is also used in cosmetic and food industries as important catalytic enzyme. Melanin pigment synthesized by tyrosinase has found applications for protection against radiation cation exchangers, drug carriers, antioxidants, antiviral agents, or immunogen. The recombinant V. spinosum tryosinase protein can be used to produce tailor-made melanin and other polyphenolic materials using various phenols and catechols as starting materials. This review compiles the recent data on biochemical and molecular properties of microbial tyrosinases, underlining their importance in the industrial use of these enzymes. After that, their most promising applications in pharmaceutical, food processing, and environmental fields are presented.

Environmentally friendly ionic liquid-in-water microemulsions for extraction of hydrophilic and lipophilic components from Flos Chrysanthemi.

Science.gov (United States)

Chen, Jue; Cao, Jun; Gao, Wen; Qi, Lian-Wen; Li, Ping

2013-10-21

Ionic liquids (ILs) have numerous chemical applications as environmentally green solvents that are extending into microemulsion applications. In this work, a novel benign IL-in-water microemulsion system modified by an IL surfactant has been proposed for simultaneous extraction of hydrophilic and lipophilic constituents from Flos Chrysanthemi (Chrysanthemum morifolium). Constituents were analyzed by rapid-resolution liquid chromatography coupled with quadrupole time-of-flight mass spectrometry. A mixture-design approach was used to optimize the IL surfactant and the IL oil phase in the microemulsion system. Microemulsions consisting of 6.0% 1-dodecyl-3-methylimidazolium hydrogen sulfate, 0.1% 1-vinyl-3-methylimidazolium hexafluorophosphate and 93.9% water offered the acceptable extract efficiency that are comparable to or even better than conventional volatile organic solvents. This assay was fully validated with respect to the linearity of response (r(2) > 0.999 over two orders of magnitude), precision (intra-RSD < 0.49 and inter-day RSD < 2.21), and accuracy (recoveries ranging from 93.73% to 101.84%). The proposed IL-in-water microemulsion method provided an environmentally friendly alternative for efficient extraction of compounds from Flos Chrysanthemi and could be extended to complex environmental and pharmaceutical samples.

Simple gases to replace non-environmentally friendly polymer foaming agents. A thermodynamic investigation

International Nuclear Information System (INIS)

Grolier, Jean-Pierre E.; Randzio, Stanislaw L.

2012-01-01

Highlights: ► The PVT-vibrating wire technique and PVT-scanning transitiometry. ► Polymer swelling with measured gas sorption and gas–polymer interaction energies. ► Experimental measurements up to 373 K and 100 MPa. ► Hydrostatic and plasticization effects under high pressure gas and induced T g -shifts. ► Thermodynamic study of the (gas + polymer) systems polystyrene with CO 2 , N 2 , and freons. - Abstract: Foaming constitutes one of the most important industrial activities in polymer engineering to produce efficient thermal insulating materials. In particular, rigid insulating boards are produced worldwide on a large scale using blowing agents which eventually are released in the environment where they adversely impact the natural friendly stratospheric ozone layer. Concomitantly, the chemicals used as blowing agents contribute to the creation of the unfriendly tropospheric ozone layer generating the disastrous green house effect around our planet. The traditional foaming intermediates currently named freons, like chlorofluorocarbons (CFCs) currently used as blowing agents as well as the hydrochlorofluorocarbons (HCFCs) often considered as alternative blowing agents, must be banned from industrial processes and new (friendly) foaming agents have to be suggested and evaluated in terms of both easy engineering and environmental neutrality. Undoubtedly thermodynamics plays a major role in assessing the effective capability of those chemicals. Some CFCs still accepted and other possible simple gases like carbon dioxide and nitrogen have been considered. The in-depth thermodynamic investigation has been made possible thanks to new experimental developments to determine gas solubility in polymers and associated swelling as well as the thermodynamic properties of (gas + polymer) systems, including the thermophysical properties of polymers under gas sorption. Pertinent data have been generated for such properties over extended T and p ranges.

Application of microorganisms in concrete: a promising sustainable strategy to improve concrete durability.

Science.gov (United States)

Wang, Jianyun; Ersan, Yusuf Cagatay; Boon, Nico; De Belie, Nele

2016-04-01

The beneficial effect of microbially induced carbonate precipitation on building materials has been gradually disclosed in the last decade. After the first applications of on historical stones, promising results were obtained with the respect of improved durability. An extensive study then followed on the application of this environmentally friendly and compatible material on a currently widely used construction material, concrete. This review is focused on the discussion of the impact of the two main applications, bacterial surface treatment and bacteria based crack repair, on concrete durability. Special attention was paid to the choice of suitable bacteria and the metabolic pathway aiming at their functionality in concrete environment. Interactions between bacterial cells and cementitious matrix were also elaborated. Furthermore, recommendations to improve the effectiveness of bacterial treatment are provided. Limitations of current studies, updated applications and future application perspectives are shortly outlined.

Eco-friendly Retail Product Attributes, Customer Attributes and the Repurchase Intentions of South African Consumers

OpenAIRE

Job Dubihlela; Tandiswa Ngxukumeshe

2016-01-01

Purpose –Consumers are becoming progressively aware of the significance of eco-friendly activities, and their environmental consciousness drives them to consume eco-friendly products and services more, and prefer to support organisations that favor conservational practices. Increased environmental impacts bring a rise in concerns locally and globally, on sustainability issues aimed at reducing non-conservative consumption patterns. Retail organisations are increasingly developing and marketin...

Comparative analysis of thermally activated, environmentally friendly cooling systems

International Nuclear Information System (INIS)

Gupta, Y.; Metchop, L.; Frantzis, A.; Phelan, P.E.

2008-01-01

This paper compares the relative performances of three different thermally activated, environmentally friendly cooling systems, e.g. a silica-gel-water adsorption system, a LiBr-H 2 O absorption system and a desiccant air system. The adsorption and absorption systems in the current study employ water as the refrigerant, while the desiccant system cools atmospheric air directly. Each of these systems can be utilized at relatively low heat source temperatures such as achieved by flat plate solar collectors, but it is unclear which of these systems is best suited to what range of heat source temperature. Our study explores answers to this question by generating quantitative results comparing their relative thermal performance, i.e. COP and refrigeration capacity, and a qualitative comparison based on the size, maturity of technology, safe operation etc. In order to provide a fair comparison between the fundamentally different systems, a UA (overall heat transfer coefficient multiplied by the heat transfer area) value of 1.0 kW deg. C -1 is considered for the heat exchanger that transfers heat from the supplied hot water. Furthermore, to compare systems of similar size, the mass of silica-gel in the adsorption and desiccant systems and the mass of LiBr-H 2 O solution in the absorption system were specified such that each system provides the same amount of refrigeration (8.0 kW) at a source temperature of 90 deg. C. It is found that the absorption and adsorption cooling systems have a higher refrigeration capacity at heat source temperatures below 90 deg. C, while the desiccant air system outperforms the others at temperatures above 90 deg. C

The “Green Jobs” Fantasy: Why the Economic and Environmental Reality Can Never Live Up to the Political Promise

Directory of Open Access Journals (Sweden)

Jennifer Winter

2013-10-01

Full Text Available Agriculture is one of the least “green” — that is, the least environmentally friendly — sectors in Canada, based on its energy-use intensity and greenhouse gas emissions intensity. But agriculture is also the “greenest” sector in Canada, according to one measure that calculates the proportion of “green employment” in various industries. Welcome to the world of “green jobs,” where vague definitions often give energy-intensive, carbon-heavy industries a “green” stamp of approval. Examples include companies making solar panels, but using large volumes of energy to do so or where an accountant preparing financial returns is counted as a “green” worker at one office, but turns instantly “dirty” should he cross the street to do the same accounting work at another office. It is also a world where inefficient power generation is considered positive, if it means employing more “green workers” per unit of power output, regardless of any negative effects that may have on the economy. The concept of “green jobs” has become immensely popular among policy planners looking to address the problem of global warming, yet are aware of the economic costs of anti-carbon measures. The promise that western economies can reduce carbon emissions while creating thousands, if not millions, of “green jobs” — which will more than compensate for the job losses that will occur in sectors reliant on fossil fuels — has been especially embraced by politicians, relieved to find a pro-climate policy that also doubles as a pro-economic policy. Unfortunately, there is scant agreement on what fairly qualifies as a “green job,” and much evidence that what policy-makers frequently consider “green jobs” are, in fact, existing jobs, belonging to the traditional economy, but simply reclassified as “green.” By emphasizing “green jobs,” policy-makers risk measuring environmental progress based on a concept that can often be

Functionalization and Dispersion of Carbon Nanomaterials Using an Environmentally Friendly Ultrasonicated Ozonolysis Process.

Science.gov (United States)

Yeo, Eudora S Y; Mathys, Gary I; Brack, Narelle; Thostenson, Erik T; Rider, Andrew N

2017-05-30

Functionalization of carbon nanomaterials is often a critical step that facilitates their integration into larger material systems and devices. In the as-received form, carbon nanomaterials, such as carbon nanotubes (CNTs) or graphene nanoplatelets (GNPs), may contain large agglomerates. Both agglomerates and impurities will diminish the benefits of the unique electrical and mechanical properties offered when CNTs or GNPs are incorporated into polymers or composite material systems. Whilst a variety of methods exist to functionalize carbon nanomaterials and to create stable dispersions, many the processes use harsh chemicals, organic solvents, or surfactants, which are environmentally unfriendly and may increase the processing burden when isolating the nanomaterials for subsequent use. The current research details the use of an alternative, environmentally friendly technique for functionalizing CNTs and GNPs. It produces stable, aqueous dispersions free of harmful chemicals. Both CNTs and GNPs can be added to water at concentrations up to 5 g/L and can be recirculated through a high-powered ultrasonic cell. The simultaneous injection of ozone into the cell progressively oxidizes the carbon nanomaterials, and the combined ultrasonication breaks down agglomerates and immediately exposes fresh material for functionalization. The prepared dispersions are ideally suited for the deposition of thin films onto solid substrates using electrophoretic deposition (EPD). CNTs and GNPs from the aqueous dispersions can be readily used to coat carbon- and glass-reinforcing fibers using EPD for the preparation of hierarchical composite materials.

Environmentally friendly production of charcoal from empty fruit bunches using pilot plant

International Nuclear Information System (INIS)

Normah Mulop; Mohd Suffian Abdul Rahim

2000-01-01

Empty fruit bunches (EFB) from palm oil milling process are classified as palm oil waste. The EFB can be turned into valuable product such as charcoal, which can be processed further to activated carbon in order to solve some of the disposal problems. In this project, raw EFB was converted to charcoal by means of a pilot plant. A burner generating indirect heat controls the temperature of the process. The carbonization process was carried out in the absence of air at various temperatures and durations to find the optimum carbonization parameters. The study shows that the optimum operating, temperature for carbonization of EFB is 500 o C for the duration of 11/2 hours. The average fixed carbon content of the charcoal is 61.08. The high percentage of volatile matter is prevented from escaping into the air by trapping them in a series of cyclones. The double layered cyclones using water as the cooling medium, condense more volatile matter and reduces smoke exhaust. 50.7 % of ,gaseous product is condensed and 49.2 % is emitted to the atmosphere. The result is an environmental friendly pilot plant. (author)

Enhancing Environmental Friendliness through Mobile Phone ...

African Journals Online (AJOL)

Enhancing Environmental Friendliness through Mobile Phone Learning. ... Journal Home > Vol 18, No 1 (2014) > ... Environmental friendly or eco-friendly refers to products or processes that are not harmful to the environment and people who ...

Environmentally friendly preparation of pectins from agricultural byproducts and their structural/rheological characterization.

Science.gov (United States)

Min, Bockki; Lim, Jongbin; Ko, Sanghoon; Lee, Kwang-Geun; Lee, Sung Ho; Lee, Suyong

2011-02-01

Apple pomace which is the main waste of fruit juice industry was utilized to extract pectins in an environmentally friendly way, which was then compared with chemically-extracted pectins. The water-based extraction with combined physical and enzymatic treatments produced pectins with 693.2 mg g(-1) galacturonic acid and 4.6% yield, which were less than those of chemically-extracted pectins. Chemically-extracted pectins exhibited lower degree of esterification (58%) than the pectin samples obtained by physical/enzymatic treatments (69%), which were also confirmed by FT-IR analysis. When subjected to steady-shear rheological conditions, both pectin solutions were shown to have shear-thinning properties. However, decreased viscosity was observed in the pectins extracted by combined physical/enzymatic methods which could be mainly attributed to the presence of more methyl esters, thus limiting polymer chain interactions. Moreover, the pectins which were extracted by combined physical/enzymatic treatments, showed less elastic properties under high shear rate conditions, compared to the chemically-extracted pectins. Copyright © 2010 Elsevier Ltd. All rights reserved.

PAN-Immobilized PVC-NPOE Membrane for Environmentally Friendly Sensing of Cd(II Ions

Directory of Open Access Journals (Sweden)

Moersilah Moersilah

2017-04-01

Full Text Available A simple, cheap and environmentally friendly analytical method of Cd(II in the aqueous system has been developed by immobilization of 1-(2-pyridilazo-2-naphtol (PAN in poly vinyl chloride (PVC matrix and nitrophenyl octyl ether (NPOE as a plasticizer. Upon contact with Cd(II in solution, the color of sensor membrane changes from dark yellow to dark red, which is due to the formation of Cd(II–PAN complex. The best sensing results were obtained at pH 8.0 and λmax 558 nm. The dimension of the proposed sensor membrane was 0.8 cm x 2 cm with a thickness of 0.05 mm, the volume of sample was 2 mL with the Cd(II concentration range of  0 – 1.2 ppm. The limit of detection of the method was found to be 0.432 + 0.104 ppm, which was reversible. The proposed methods have been applied in the determination of Cd(II in water samples after addition of internal standard.

Geothermal and Trigeneration Systems as Innovative and EnvironmentallyFriendly Solutions for Telecommunication Plant Cooling

Directory of Open Access Journals (Sweden)

Paolo Trotta

2016-12-01

Full Text Available The paper deals with a model-based analysis of innovative cooling systems, to be deployed in telecommunication (TLC plants in consideration of their size, geographical location and typology (e.g. central Offices or data-centers. Environmentally friendly systems, such as geothermal heat pumps and trigeneration plants, were considered. The trade-off between the investment and operating costs was first analyzed, followed by a comparative evaluation of economic savings achievable via each candidate solution with respect to reference benchmarks, here represented by traditional air-water heat pump and conventional interaction with electrical grid. In this way, a preliminary macroscopic assessment of the best solutions was accomplished, according to the different scenarios (i.e. small or big TLC plant under investigation. A more detailed analysis, concerning the comparison between traditional and geothermal systems, was specifically carried out to evaluate savings as a function of the external temperature and, consequently, of geographical location.

Application and Development of an Environmentally Friendly Blast Hole Plug for Underground Coal Mines

Directory of Open Access Journals (Sweden)

Donghui Yang

2018-01-01

Full Text Available Drilling and blasting technology is one of the main methods for pressure relief in deep mining. The traditional method for blasting hole blockage with clay stemming has many problems, which include a large volume of transportation, excess loading time, and high labor intensity. An environmentally friendly blast hole plug was designed and developed. This method is cheap, closely blocks the hole, is quickly loaded, and is convenient for transportation. The impact test on the plug was carried out using an improved split Hopkinson pressure bar test system, and the industrial test was carried out in underground tunnel of coal mine. The tests results showed that, compared with clay stemming, the new method proposed in this paper could prolong the action time of the detonation gas, prevent premature detonation gas emissions, reduce the unit consumption of explosives, improve the utilization ratio, reduce the labor intensity of workers, and improve the effect of rock blasting with low cost of rock breaking.

Promoting energy-saving and environmentally friendly generation dispatching model in China: Phase development and case studies

International Nuclear Information System (INIS)

Ding, Yi; Yang, Hongliang

2013-01-01

Energy saving and environmental protection are important conditions for the sustainable development of Chinese economy. However current widely used generation scheduling model based on predefined production quota and tariff results in heavy energy consumption and severe environment pollution. From 2007, as concerns over energy shortage and environmental pollution, the Chinese authorities introduced the implementation of energy-saving generation dispatching model, which is an important approach to facilitating energy-saving and reduction of pollutant emission. The objective of implementing energy-saving generation dispatching model is to prioritize the use of renewable energy resources and new power plants with high efficiency without compromising power system security and reliability. This paper analyzes the necessity and feasibility of implementing energy-efficient and environmentally friendly generation scheduling models in China. The institutional and technical barriers impeding the implementation of energy-saving generation dispatching model are identified. The development of advanced energy-saving generation scheduling models towards competitive market models and phased planning programs are emphasized in this paper. The effectiveness and experience of provinces piloted energy-saving generation dispatching projects are also discussed. - Highlights: ► Introducing problems of current power generation scheduling model in China. ► Discussing necessity of implementing ESGD model and corresponding barriers. ► Proposing phased planning programs for developing ESGD models. ► Discussing the effectiveness and experience of provinces piloted ESGD projects

Nuclear power: an eco friendly energy source for sustainable development

International Nuclear Information System (INIS)

Obaidurrahman, K.; Singh, Om Pal

2009-01-01

When viewed from a large set of criteria such as abundance of energy resources, environmental impacts, low fuel inventory, quantum of waste generated and green house gas emissions, nuclear power can be considered as a large scale sustainable energy source. Among all energy sources, nuclear energy has perhaps the lowest impact on the environment, especially in relation to kilowatt-hr produced, because nuclear plants do not emit harmful gases and produce small quantity of waste. In other words, nuclear energy is the most environmental friendly electricity source. There are no significant adverse effects to water, land, habitat, species and air resources. The present paper discusses the sustainability and feasibility of nuclear power as an eco friendly energy source in the changing and challenging competitive power market. (author)

Camarines Sur Polytechnic Colleges Philippines An Eco-Friendly School Model

Directory of Open Access Journals (Sweden)

Dr. Jose Ariel R. Ibarrientos

2015-03-01

Full Text Available Abstract Academic institutions can become more environmentally responsible through the implementation of various conservation initiative. Along this the study attempt to transform the Camarines Sur Polytechnic Colleges into living models of an ecologically sustainable learning institutions. Data was gathered from among the six administrators 336 students 62 teaching and 31 non-teaching personnel from school year 2013-2014. Questionnaire supported by interview and ocular inspection was utilized to assess the college practices along its environmental policy resource management curriculum project and budget. Results revealed that the college has an Eco Friendly Program and has implemented guidelines along solid Waste Management in Classrooms and Laboratories. Awareness on environmental policy resource management in classrooms buildings and grounds purchasing use of lights and electricity paper conservation water conservation waste management were highly implemented HI. Maintenance on air quality and waste management in the canteen were moderately implemented MI in the college. Generally the college are Aware A along environmental programs and highly implement HI its environmental practices. T-test result shows that there was no significant difference between the level of awareness and implementation on environmental practices. The proposed Eco-Friendly School Model developed by the researcher must be adopted by the college.

Going green with eco-friendly dentistry.

Science.gov (United States)

Avinash, Bhagyalakshmi; Avinash, B S; Shivalinga, B M; Jyothikiran, S; Padmini, M N

2013-07-01

Eco-friendly dentistry is currently transforming the medical and dental field to decrease its affect on our natural environment and reduce the amount of waste being produced. Eco-friendly dentistry uses a sustainable approach to encourage dentists to implement new strategies to try and reduce the energy being consumed and the large amount of waste being produced by the industry. Many reasonable, practical and easy alternatives do exist which would reduce the environmental footprint of a dental office were it to follow the 'green' recommendations. Dentist should take a leading role in the society by implementing 'green' initiatives to lessen their impact on the environment. This article provides a series of 'green' recommendations that dentists around the world can implement to become a leading Stewards of the environment.

A Two-Wheeled, Self-Balancing Electric Vehicle Used As an Environmentally Friendly Individual Means of Transport

Science.gov (United States)

Bździuch, D.; Grzegożek, W.

2016-09-01

This paper shows a concept of a model of a two-wheeled self-balancing vehicle with an electric motor drive as an environmentally-friendly personal transporter. The principle of work, modelling of construction and performing a simulation are presented and discussed. The visualization of the designed vehicle was made thanks to using Solid Works a computer-aided design program. The vehicle was modelled as an inverted pendulum. The stability of the mechanism in the equilibrium position was studied. An exemplary steering system was also subjected to the analysis that compared two controllers: PID and LQR which enabled to monitor the balance of the vehicle when the required conditions were fulfilled. Modelling of work of the controllers and the evaluation of the obtained results in required conditions were performed in the MATLAB environment.

Incentives for development and application of environmentally friendly biotechnological products and processes; Anreize fuer die Entwicklung und Anwendung umweltfreundlicher biotechnischer Produkte und Verfahren

Energy Technology Data Exchange (ETDEWEB)

Rhein, Hans-Bernhard; Endler, Katharina [Umweltkanzlei Dr. Rhein, Sarstedt (Germany); Ulber, Roland; Muffler, Kai; Mueller, Felix [Technische Univ. Kaiserslautern (Germany)

2011-01-15

Studies assign a tremendous growth potential related to biotechnology. However, the predicted proportion of biotechnological manufactured products in the chemical industry for the year 2010 by 20 % will more likely remain by today's 5 %. The study deals with the question why biotechnological products are currently established at the market in the obvious slow way. Therefore, the current constraints and existing respectively new incentive instruments referring to the white (industrial) biotechnology are analyzed to focus on the promotion of the development and application of environmentally friendly biotechnology products and methods. In addition to a search concerning environmental relevance and further development of white biotechnology, the postulated constraints and incentives as well as new promotions are discussed with the help of expert interviews. On the basis of a preliminary study - after further discussion with experts - concrete proposals on improvements related to an ongoing establishment of biotechnology will be derived. Based on case studies (2nd generation biofuels, polyhydroxybutyrate as biopolymer and phytase as an animal feed additive), the practical effects and specific conditions to incentives, from the perspective of biotechnological processes and environmentally friendly products are investigated. Overall, about 40 activities were recommended, which could be assigned to areas of direct government incentives (tax policy/subsidies, subsidies, education and research policy, basic political conditions, government demand and information policy/consumer intelligence) as well as non-governmental incentives (knowledge transfer and cooperation, organisation-related policy, capital market financing). (orig.)

Incentives for development and application of environmentally friendly biotechnological products and processes; Anreize fuer die Entwicklung und Anwendung umweltfreundlicher biotechnischer Produkte und Verfahren

Energy Technology Data Exchange (ETDEWEB)

Rhein, Hans-Bernhard; Endler, Katharina [Umweltkanzlei Dr. Rhein, Sarstedt (Germany); Ulber, Roland; Muffler, Kai; Mueller, Felix [Technische Univ. Kaiserslautern (Germany)

2011-01-15

Studies assign a tremendous growth potential related to biotechnology. However, the predicted proportion of biotechnological manufactured products in the chemical industry for the year 2010 by 20 % will more likely remain by today's 5 %. The study deals with the question why biotechnological products are currently established at the market in the obvious slow way. Therefore, the current constraints and existing respectively new incentive instruments referring to the white (industrial) biotechnology are analyzed to focus on the promotion of the development and application of environmentally friendly biotechnology products and methods. In addition to a search concerning environmental relevance and further development of white biotechnology, the postulated constraints and incentives as well as new promotions are discussed with the help of expert interviews. On the basis of a preliminary study - after further discussion with experts - concrete proposals on improvements related to an ongoing establishment of biotechnology will be derived. Based on case studies (2nd generation biofuels, polyhydroxybutyrate as biopolymer and phytase as an animal feed additive), the practical effects and specific conditions to incentives, from the perspective of biotechnological processes and environmentally friendly products are investigated. Overall, about 40 activities were recommended, which could be assigned to areas of direct government incentives (tax policy/subsidies, subsidies, education and research policy, basic political conditions, government demand and information policy/consumer intelligence) as well as non-governmental incentives (knowledge transfer and cooperation, organisation-related policy, capital market financing). (orig.)

Investigation of environmental friendly Te-free SiSb material for applications of phase-change memory

International Nuclear Information System (INIS)

Zhang Ting; Song Zhitang; Liu Bo; Feng Songlin

2008-01-01

Te-free environmental friendly Si x Sb 100−x phase-change materials are investigated. The binary material, which is compatible with the complementary metal-oxide-semiconductor manufacturing process, is outstanding in various properties. Si x Sb 100−x shows a much better data retention as compared with Ge 2 Sb 2 Te 5 . The density change for Si 10 Sb 90 and Si 16 Sb 84 is only about 3% and 3.8%, respectively. The failure times for Si 10 Sb 90 and Si 16 Sb 84 are about 10 3 and 10 6 times longer than that of Ge 2 Sb 2 Te 5 at 110 °C. The crystallization temperature of Si x Sb 100−x increases with silicon content within the material. Si x Sb 100−x materials are good candidates for the phase-change memory applications

arXiv Candidate eco-friendly gas mixtures for MPGDs

CERN Document Server

Benussi, L.; Saviano, G.; Muhammad, S.; Ferrini, M.; Primavera, F.; Parvis, M.; Grassing, S.; Colafranceschi, S.; Kjøbro, J.; Sharma, A.; Yang, D.; Chen, G.; Ban, Y.; Li, Q.

2018-01-01

Modern gas detectors for detection of particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This review studies properties of potential eco-friendly gas candidate replacements.

Intermediate peer contexts and educational outcomes: Do the friends of students' friends matter?

Science.gov (United States)

Carbonaro, William; Workman, Joseph

2016-07-01

Sociologists of education have long been interested in the effects of peer relations on educational outcomes. Recent theory and research on adolescence suggest that peers on the boundaries of students' friendship networks may play an important role in shaping behaviors and educational outcomes. In this study, we examine the importance of a key "intermediate peer context" for students' outcomes: the friends of a student's friends. Our findings indicate both friends' and friends' friends' characteristics independently predict students' college expectations and their risk of dropping out of high school (although only friends' characteristics predict GPA). Our models suggest the magnitude of students' friends-of-friends' characteristics are at least as large their friends' characteristics. Together, the association between the peer context and students outcomes is considerably larger when accounting for both the characteristics of students' friends and the friends of their friends. Copyright © 2016 Elsevier Inc. All rights reserved.

Tribological Evaluation of Date Palm Fruit Syrup–A Potential Environmental-Friendly Lubricant

Directory of Open Access Journals (Sweden)

Abdul Samad Mohammed

2017-07-01

Full Text Available Date palm is one of the most cultivated palms mostly found in the Middle Eastern regions of the world. The date palm fruits are not only nutritionally rich, but also have a good amount of fatty acids such as oleic acid, palmitic acid, and linoleic acids, which have excellent anti-wear and lubricating properties, making it a potentially good candidate to be used as an environmentally-friendly lubricant. This study is a preliminary effort to explore the lubricating properties of date palm fruit syrup by conducting ball-on-disc wear tests on mild steel samples. Different concentrations (50, 75, and 100 vol % of the syrup in water were tested at a normal load of 50 N and a sliding linear speed of 0.1 m/s. Scanning electron microscopy and optical profilometry were used to characterize the wear tracks and estimate the wear rates. 100 vol % date syrup with a viscosity of 16.95 mPa·s showed excellent results by reducing the coefficient of friction of steel-on-steel from 0.6 (dry conditions to a value of ~0.1. The depth of the wear track reduced from ~152 µm (dry conditions to ~11 µm, signifying a considerable reduction in wear.

Romantic Partners, Friends, Friends with Benefits, and Casual Acquaintances As Sexual Partners

Science.gov (United States)

Furman, Wyndol; Shaffer, Laura

2011-01-01

The purpose of the present study was to provide a detailed examination of sexual behavior with different types of partners. A sample of 163 young adults reported on their light nongenital, heavy nongenital, and genital sexual activity with romantic partners, friends, and casual acquaintances. They described their sexual activity with “friends with benefits” as well as with friends in general. Young adults were most likely to engage in sexual behavior with romantic partners, but sexual behavior also often occurred with some type of nonromantic partner. More young adults engaged in some form of sexual behavior with casual acquaintances than with friends with benefits. The frequencies of sexual behavior, however, were greater with friends with benefits than with friends or casual acquaintances. Interview and questionnaire data revealed that friends with benefits were typically friends, but not necessarily. Nonsexual activities were also less common with friends with benefits than other friends. Taken together, the findings illustrate the value of differentiating among different types of nonromantic partners and different levels of sexual behavior. PMID:21128155

Design of environmentally friendly products using indicators

DEFF Research Database (Denmark)

Lenau, Torben Anker; Bey, Niki

2001-01-01

The paper describes the requirements of product designers towards methods for environmental evaluation; it argues that indicators can be used for rough environmental evaluations and it presents experiences made with the indicator-based Oil Point Method (OPM). This method is illustrated by means...

Clean and Selective Catalytic C-H alkylation of Alkenes with Environmental friendly Alcohols

KAUST Repository

Poater, Albert

2016-09-14

Bearing the alkylation of alkene substrates using alcohol as solvent, catalysed by the cationic Ru-based catalyst [(C6H6)(PCy3)(CO)RuH]+, DFT calculations have been carried out to get mechanistic insights of such an environmental friendly reaction. Hard experimental conditions of Yi and coworkers [Science2011, 333, 1613] allow the formation of a C-C bond between indene and ethanol. The predicted mechanism suggests a cationic Ru-alkenyl species once two equivalents of indene interact releasing a molecule of indane subproduct. Then, oxidative addition of the Csingle bondO bond of alcohol to Ru-alkenyl species leads to Ru-alkenyl-alkyl species, followed by the reductive elimination process produces the desired alkylation product and a Ru-hydroxo complex. Finally, vinylic Csingle bondH activation and water elimination regenerates the Ru-alkenyl species. In this paper we present a full description of the complete reaction pathway along with possible alternative pathways, which are predicted to display higher upper barriers. Furthermore, the present study explains the possible reasons for the absence of undesired products such as indene dimer or hydroxylated indene in the experiments.

ICT for environmental sustainability. Green ICT roadmap

Energy Technology Data Exchange (ETDEWEB)

Ahola, J.; Ahlqvist, T.; Ermes, M.; Myllyoja, J.; Savola, J.

2010-03-15

This report presents a VTT roadmap on ICT for environmental sustainability, based on the assessments and evaluations made by VTT technology experts. We adopt a broad and systemic view to the issue; in other words, we believe that ICT's effectiveness depends on mutual understanding and changing the system level activities, i.e. the complex web of behaviour of people, institutions, organisations and political jurisdictions, like nation-states. We use the term ICT for environmental sustainability or environmentally sustainable ICT, instead of green ICT, and defined it as: The optimal use of ICT for managing the environmental sustainability of societal activities. The roadmap is divided into three themes. Empowering people means using ICT to raise people's awareness of the environmental impact of their actions and to channel their behaviour in a more environmentally-friendly direction. Extending natural resources involves reducing the use of diverse environmentally unsustainable resources through ICT-based solutions. Optimising systems refers to minimising the environmental load of diverse systems by optimising their operation. As a synthesis, we identified four focal topics within the roadmap themes that are most promising for further investigation. These are: (1) environmentally sustainable consumption, (2) smart energy and buildings, (3) lifecycle efficient production, and (4) optimised and adaptive networks. (orig.)

Analyzing the impact on consumer satisfaction, behavior and at-titudes by using eco-friendly practices and products in Surfers Paradise/Gold Coast city hotels, Australia.

OpenAIRE

Chikita, Maria

2012-01-01

This study explores customer attitude towards environmentally friendly practices by hotels and the impact on customer satisfaction. The research investigates individual’s behavior, attitude, knowledge, satisfaction and willingness to support eco-friendly prac-tices. The hotel industry contributes to the global environmental challenges. Consumers are becoming more aware of the environmental impacts by the hotels and a new market segment of eco-friendly customers has developed. In addition ...

Making Rice Production More Environmentally-Friendly

Directory of Open Access Journals (Sweden)

Norman Uphoff

2016-05-01

Full Text Available Irrigated rice production is one of the most essential agricultural activities for sustaining our global population, and at the same time, one of the agricultural sectors considered most eco-unfriendly. This is because it consumes a larger share of available freshwater resources, competing with varied ecosystems as well as other economic sectors; its paddy fields are responsible for significant emission of greenhouse gases; and the reliance on chemical fertilizers and various agrochemicals contributes to pollution of soils and water systems. These stresses on soils, hydrology and atmosphere are actually not necessary for rice production, which can be increased by modifying agronomic practices though more agroecologically-sound management practices. These, combined under the rubric of the System of Rice Intensification (SRI, can reduce requirements of irrigation water, chemical fertilizer and agrochemicals while increasing paddy yields and farmer’s net incomes. Here we discuss how irrigated rice production can be made more eco-friendly for the benefit of farmers, consumers and the environment. This is achieved by introducing practices that improve the growth and functioning of rice plants’ root systems and enhance the abundance, diversity and activity of beneficial soil organisms that live around plant roots and within the plants themselves as symbiotic endophytes.

Environmental Sustainability In The Thai Hotel Industry

OpenAIRE

Jirawat Anuwichanont; Panisa Mechinda; Sirivan Serirat; Aurathai Lertwannawit; Nongluck Popaijit

2011-01-01

Nowadays, the growing concern of environmental sustainability does not only influence consumers demand but also how companies run their own business. Consumers are more conscious about the environment and demanding environmental friendly products and services. Consequently, the tourism industry currently faces increasing demands from consumers to achieve levels of environmental responsiveness. Thus, companies strive to implement environmentally friendly and socially responsible practices to g...

Phytoremediation of Polychlorinated Biphenyls: New Trends and Promises

Science.gov (United States)

Van Aken, Benoit; Correa, Paola A.; Schnoor, Jerald L.

2011-01-01

Transgenic plants and associated bacteria constitute a new generation of genetically modified organisms for efficient and environmental-friendly treatment of soil and water contaminated with polychlorinated biphenyls (PCBs). This review focuses on recent advances in phytoremediation for the treatment of PCBs, including the development of transgenic plants and associated bacteria. Phytoremediation, or the use of higher plants for rehabilitation of soil and groundwater, is a promising strategy for cost-effective treatment of sites contaminated by toxic compounds, including toxic PCBs. Plants can help mitigate environmental pollution by PCBs through a range of mechanisms: besides uptake from soil (phytoextraction), plants are capable of enzymatic transformation of PCBs (phytotransformation); by releasing a variety of secondary metabolites, plants also enhance the microbial activity in the root zone, improving biodegradation of PCBs (rhizoremediation). However, because of their hydrophobicity and chemical stability, PCBs are only slowly taken up and degraded by plants and associated bacteria, resulting in incomplete treatment and potential release of toxic metabolites into the environment. Moreover, naturally occurring plant-associated bacteria may not possess the enzymatic machinery necessary for PCB degradation. In order to overcome these limitations, bacterial genes involved in the metabolism of PCBs, such as biphenyl dioxygenases, have been introduced into higher plants, following a strategy similar to the development of transgenic crops. Similarly, bacteria have then been genetically modified that exhibit improved biodegradation capabilities and are able to maintain stable relationships with plants. Transgenic plants and associated bacteria bring hope for a broader and more efficient application of phytoremediation for the treatment of PCBs. PMID:20384372

Environmentally friendly power sources for aerospace applications

Science.gov (United States)

Lapeña-Rey, Nieves; Mosquera, Jonay; Bataller, Elena; Ortí, Fortunato; Dudfield, Christopher; Orsillo, Alessandro

One of the crucial challenges of the aviation industry in upcoming years is to reduce emissions not only in the vicinity of airfields but also in cruise. Amongst other transport methods, airplanes emissions count for 3% of the CO 2 emissions. Initiatives to reduce this include not only investing in more fuel-efficient aircrafts or adapting existing ones to make them more efficient (e.g. by fitting fuel-saving winglets), but also more actively researching novel propulsion systems that incorporate environmentally friendly technologies. The Boeing Company through its European subsidiary, Boeing Research and Technology Europe (BR&TE) in collaboration with industry partners throughout Europe is working towards this goal by studying the possible application of advanced batteries and fuel-cell systems in aeronautical applications. One example is the development of a small manned two-seater prototype airplane powered only by proton exchange membrane (PEM) fuel-cell stacks, which runs on compressed hydrogen gas as fuel and pressurized air as oxidant, and Li-ion batteries. The efficient all composite motorglider is an all electric prototype airplane which does not produce any of the noxious engine exhaust by-products, such as carbon dioxide, carbon monoxide or NO x, that can contribute to climate change and adversely affect local air quality. Water and heat are the only exhaust products. The main objective is to demonstrate for the first time in aviation history a straight level manned flight with fuel-cells as the only power source. For this purpose, the original engine of a super Dimona HK36TTC glider from Diamond Aircraft Industries (Austria) was replaced by a hybrid power system, which feeds a brushless dc electrical motor that rotates a variable pitch propeller. Amongst the many technical challenges encountered when developing this test platform are maintaining the weight and balance of the aircraft, designing the thermal management system and the power management

Environmentally friendly power sources for aerospace applications

Energy Technology Data Exchange (ETDEWEB)

Lapena-Rey, Nieves; Mosquera, Jonay; Bataller, Elena; Orti, Fortunato [Boeing Research and Technology Europe Ltd., Environmental Technologies, C/ Canada Real de las Merinas 1-3, Building 4, 4th floor, Madrid 28042 (Spain); Dudfield, Christopher; Orsillo, Alessandro [Intelligent Energy Ltd., The Innovation Centre, Epinal Way, Loughborough LE11 3EH (United Kingdom)

2008-07-01

One of the crucial challenges of the aviation industry in upcoming years is to reduce emissions not only in the vicinity of airfields but also in cruise. Amongst other transport methods, airplanes emissions count for 3% of the CO{sub 2} emissions. Initiatives to reduce this include not only investing in more fuel-efficient aircrafts or adapting existing ones to make them more efficient (e.g. by fitting fuel-saving winglets), but also more actively researching novel propulsion systems that incorporate environmentally friendly technologies. The Boeing Company through its European subsidiary, Boeing Research and Technology Europe (BR and TE) in collaboration with industry partners throughout Europe is working towards this goal by studying the possible application of advanced batteries and fuel-cell systems in aeronautical applications. One example is the development of a small manned two-seater prototype airplane powered only by proton exchange membrane (PEM) fuel-cell stacks, which runs on compressed hydrogen gas as fuel and pressurized air as oxidant, and Li-ion batteries. The efficient all composite motorglider is an all electric prototype airplane which does not produce any of the noxious engine exhaust by-products, such as carbon dioxide, carbon monoxide or NOx, that can contribute to climate change and adversely affect local air quality. Water and heat are the only exhaust products. The main objective is to demonstrate for the first time in aviation history a straight level manned flight with fuel-cells as the only power source. For this purpose, the original engine of a super Dimona HK36TTC glider from Diamond Aircraft Industries (Austria) was replaced by a hybrid power system, which feeds a brushless dc electrical motor that rotates a variable pitch propeller. Amongst the many technical challenges encountered when developing this test platform are maintaining the weight and balance of the aircraft, designing the thermal management system and the power

Report on the fiscal 1993 investigational study of the environmental technology development trend in Japan. Trend survey of the introduction policy of environmentally friendly products; 1993 nendo Nippon ni okeru kankyo gijutsu kaihatsu doko nado ni kansuru chosa kenkyu hokokusho. Kankyo chowagata seihin no donyu hosaku nado doko chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-05-01

An investigation was conducted into the systematical scheme for the introduction and promotion of environmentally friendly products mostly to the U.S., Europe and China. In the U.S., the introduction policy is given to one and all fields of the industry. The introduction policy of the U.S. has a characteristic that the introduction is left to the market principle by DSM or permit dealing, etc. except the preferential tax system and systematical finance in which the government is concerned. The policy of European countries is characterized by the idea preceding, standards or rules are first given, and the whole is pushed on to them. Accordingly, it seems that there is few atmosphere of expecting to receive the government side economic incentives from the corporate side. Legal regulations on the environment in China were prepared in a comparatively early time (1979), but the supervision of obeying the regulations and the appearance/spread of environmentally friendly product menus have just started. Accordingly, as the introduction policy on environmentally friendly products, there was found nothing valuable but the regulations. 12 refs., 3 figs., 15 tabs.

Benevolent technotopias and hitherto unimaginable meats: Tracing the promises of in vitro meat.

Science.gov (United States)

Jönsson, Erik

2016-10-01

Today, in vitro (Latin: in glass) meat researchers strive to overhaul meat production technologies by producing meat outside animal bodies, primarily by culturing cells. In the process, meat should become healthier, more environmentally friendly and kinder to animals. In this article, I scrutinize (and problematize) this promissory discourse by examining the world that proponents envision alongside the world from which promises emerge. First, I trace the increasing number of publications striving to pinpoint the nature of in vitro meat to unveil the creation of an in vitro meat canon wherein perceived possibilities become taken for granted. Second, I investigate how the promissory discourse is often relatively silent on key aspects of how this technology could remake the world. Wet laboratories, animals and end products become foregrounded at the expense of political economy and the biophysical properties of cultured cells. Thus, questions concerning how funding requirements shape representations of this new technology, together with in vitro meat's particular socio-spatial and socio-ecological implications, become problematically de-emphasized.

Supporting cystic fibrosis disease management during adolescence: the role of family and friends.

Science.gov (United States)

Barker, D H; Driscoll, K A; Modi, A C; Light, M J; Quittner, A L

2012-07-01

Successful management of a complex disease, such as cystic fibrosis (CF), requires support from family and friends; however, few studies have examined social support in adolescents with CF. Twenty-four adolescents were interviewed about the support they receive from family and friends. Interviews were transcribed, coded and analysed to determine the types, frequency and perceived supportiveness of specific behaviours. Both family and friends provided treatment-related support to adolescents with CF. Family provided more tangible support and friends provided more relational support. Adolescents also reported that the manner, timing and context of support behaviours influenced their perceptions of the behaviours' supportiveness. A subset of adolescents (17%) chose not to disclose their diagnosis to their friends. The provision of support appears to be distinct from adolescent's perception of support and there may be some behaviours, such as treatment reminders, that are important to disease management but viewed as less supportive by adolescents. Facilitating increased social support holds the promise of improving disease management during adolescents, but more work is need to understand which aspects of support are related to management outcomes. © 2011 Blackwell Publishing Ltd.

Feasibility survey of the environmentally-friendly coal utilization system. Feasibility survey of the environmentally-friendly coal utilization system in Indonesia; Kankyo chowagata sekitan riyo system kanosei chosa. Indonesia ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

With relation to the coal of Indonesia, where the expansion of the use of coal as a substitute for petroleum/plant fuel is aimed at, the paper grasped the situation of coal production/distribution/utilization and environmental problems, and analyzed the situation of the coal utilization/spread by industry including the commercial/residential use. The purpose of the survey is to work out a comprehensive master plan including Japan`s international cooperation for introducing the environmentally-friendly coal utilization system to Indonesia. Coal utilization systems, the introduction of which Indonesia should study in future, were picked up, according to the surveys in fiscal 1993 and 1994. In commercial/residential and small-scale industry sectors, needed is improvement of carbonization technology for production of coal carbonization briquette. Moreover, the introduction of bio-briquette should be studied in the future. In the power generation sector, studies should be made on the introduction of technology for SOx/NOx reduction and technology for coal ash treatment including the effective use of coal ash. For the introduction of coal boilers, the combustion mixed with bagasse, which is abundant in amount, is also necessary. In the coal production sector, coal preparation technology is studied, and a method to select the optimum process was proposed through the simulation. 76 figs., 43 tabs.

It is a moral issue : The relationship between environmental self-identity, obligation-based intrinsic motivation and pro-environmental behaviour

NARCIS (Netherlands)

van der Werff, Ellen; Steg, Linda; Keizer, Kees

2013-01-01

In order to effectively mitigate climate change, people need to adopt environmentally-friendly actions. We argue that some people act in an environmentally-friendly manner without external incentives to do so, but rather because they are intrinsically motivated to do so. There is some initial

Physicochemical characterization of copper slag and alternatives of friendly environmental management

Directory of Open Access Journals (Sweden)

Sánchez M.

2013-01-01

Full Text Available Copper slags are usually considered a waste and characterized only by the final copper content. Large and increasing quantities are being produced and disposed of by stockpiling near the metallurgical plants. This paper stresses the importance of physico-chemical characterization when considering uses for slags and the possibility of recovering the valuable metals still remaining in this phase. The purpose of this work is to support and encourage a change in the classical perception of slag from a ‘waste’ to a ‘resource’; promote the development of new technologies for treatment to recover residual values and encourage a search for new uses; with the ultimate objective of eliminating slag stockpiles thereby diminishing the environmental impact of smelting operations. Some of the results of experimental laboratory work done by the authors and examples of commercial applications will be shown. A promising future for valorization and utilization of slags is expected and will provide an example when considering the use of all the other large quantities of wastes generated by the mining industry.

Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in Malaysia and Vietnam; Kankyo chowagata sekitan riyo system kanosei chosa. Malaysia Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This survey arranged the status of coal utilization technology and the status of coal production, supply, etc. in Malaysia and Vietnam, examined/studied coal utilization systems in both countries, and finally assessed feasibility of introducing the environmentally friendly type coal utilization system. As a country of primary energy source which is abundant in crude oil, natural gas, hydroelectric power, coal, etc., Malaysia now depends on crude oil and natural gas for 80% of its energy, and places emphasis on exploration of natural gas and oil refining. In electric power and cement industries where coal is consumed, effectiveness and environmental issues in association with coal utilization are future subjects. In Vietnam, the north is abundant in hydroelectric power and anthracite, and the south in oil and gas resource, but the north and central districts are in a state of undevelopment. Coal is used for coal thermal power generation, cement industry, and residential/commercial fuel. In the future, effective coal utilization and environmental issues will be subjects. 16 refs., 38 figs., 75 tabs.

Remediation of lead and cadmium from simulated groundwater in loess region in northwestern China using permeable reactive barrier filled with environmentally friendly mixed adsorbents.

Science.gov (United States)

Fan, Chunhui; Gao, Yalin; Zhang, Yingchao; Dong, Wanqing; Lai, Miao

2018-01-01

Permeable reactive barrier (PRB) is potentially effective for groundwater remediation, especially using environmentally friendly mixed fillers in representative areas, such as semi-arid loess region in northwestern China. The mixed materials, including corn straw (agricultural wastes), fly ash (industrial wastes), zeolite synthesized from fly ash (reutilized products), and iron-manganese nodule derived from loess (materials with regional characteristics) in northwestern China, were chosen as PRB media to reduce the contents of lead and cadmium in simulated groundwater. A series of lab-scale column experiments were investigated, and the response surface methodology (RSM) was used to optimize the working process; Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) were applied to further reveal the reaction mechanism. It shows that the purification efficiencies are more acceptable when the concentrations of lead and cadmium are approximately 7 and 0.7 mg/L, respectively, at 25 °C in weakly acidic solution, and functional groups of -OH and C=C play an important role for contaminants removal. The mixed adsorbents used are effective to remove lead and cadmium in groundwater. This is the first report on the removal of lead and cadmium from groundwater in loess region in northwestern China using PRB filled with environmentally friendly mixed adsorbents.

Phil Friend julgustab riske võtma / Phil Friend ; interv. Harda Roosna

Index Scriptorium Estoniae

Friend, Phil

2003-01-01

Suurbritannia koolitus- ja konsultatsioonifirma Churchill & Friend juhataja Phil Friend vastab küsimustele oma firma missiooni kohta Hiiumaal, puuetega inimeste elu erinevuste kohta Hiiumaal ja Suurbritannias. Vt. samas: Phil Friend julgustas tööandjaid puuetega inimesi tööle võtma

Organophosphate degrading microorganisms and enzymes as biocatalysts in environmental and personal decontamination applications.

Science.gov (United States)

Yair, Simo; Ofer, Butnaro; Arik, Eisenkraft; Shai, Shrot; Yossi, Rosman; Tzvika, Dushnitsky; Amir, Krivoy

2008-01-01

One of the major challenges in dealing with chemical warfare agent (CWA) dispersal, whether in the battlefield or after a terror act, is decontamination and rehabilitation of any contaminated area. Organophosphates (OPs) are considered to be among the deadliest CWAs to date. Other OPs are used as pesticides in modern agriculture, and are considered environmentally hazardous. Current methods for OP decontamination are either dangerous or insufficiently effective. As a promising solution for this problem, bioremediation--the use of biocomponents for environmental remediation--is a potentially effective, safe, and environment-friendly method. The technology relies on several enzymatic mechanisms, and can be applied in various ways. We will review recent achievements and potential applications, such as biocatalyst-containing foams and an enzymatic sponge, for environmental as well as personal exterior decontamination.

Environmentally Benign Production of Stretchable and Robust Superhydrophobic Silicone Monoliths.

Science.gov (United States)

Davis, Alexander; Surdo, Salvatore; Caputo, Gianvito; Bayer, Ilker S; Athanassiou, Athanassia

2018-01-24

Superhydrophobic materials hold an enormous potential in sectors as important as aerospace, food industries, or biomedicine. Despite this great promise, the lack of environmentally friendly production methods and limited robustness remain the two most pertinent barriers to the scalability, large-area production, and widespread use of superhydrophobic materials. In this work, highly robust superhydrophobic silicone monoliths are produced through a scalable and environmentally friendly emulsion technique. It is first found that stable and surfactantless water-in-polydimethylsiloxane (PDMS) emulsions can be formed through mechanical mixing. Increasing the internal phase fraction of the precursor emulsion is found to increase porosity and microtexture of the final monoliths, rendering them superhydrophobic. Silica nanoparticles can also be dispersed in the aqueous internal phase to create micro/nanotextured monoliths, giving further improvements in superhydrophobicity. Due to the elastomeric nature of PDMS, superhydrophobicity can be maintained even while the material is mechanically strained or compressed. In addition, because of their self-similarity, the monoliths show outstanding robustness to knife-scratch, tape-peel, and finger-wipe tests, as well as rigorous sandpaper abrasion. Superhydrophobicity was also unchanged when exposed to adverse environmental conditions including corrosive solutions, UV light, extreme temperatures, and high-energy droplet impact. Finally, important properties for eventual adoption in real-world applications including self-cleaning, stain-repellence, and blood-repellence are demonstrated.

Environmentally Friendly Concept in Spatial Regulation

Directory of Open Access Journals (Sweden)

T Taryono

2004-01-01

Full Text Available Spatial order of a region include purpose of structure and interrelatedness of spatial order which as a unity of development mechanism. Spatial order can’t be part from law basic that is UUD’45 and GBHN, in order to the management can be integrated and keep the environment. Spatial order also take note of physical factor and non physical factor. Physical factor consist of soil, water, flora, and fauna. Non physical factors consist of environment, social, economic, and soon. The principle of arrangement of spatial order in a region include national region, regional and local, and a region as an administrative baoundary, that is local government authority, like province, district, subdistrict, and village. The effort for spatial ordering of the environment, for example ordering resource, arrangement of allocation and location, arrangement of environmental aesthetic  and arrangement of environmental quality.

Environmentally Friendly Anticorrosion Coating for High Strength Fasteners

Science.gov (United States)

2011-01-01

electroplated coatings followed by a hexavalent chrome rinse. The environmental and health hazards associated with cadmium and hexavalent chromium are...have been used with cadmium (Cd) electroplated coatings, followed by a hexavalent chromium (Cr6+) rinse. The environmental and human health hazards...followed by a hexavalent chromium (Cr6+) rinse. The environmental and human health hazards associated with both cadmium and chromates are well

Dimeric Surfactants: Promising Ingredients of Cosmetics and Toiletries

Directory of Open Access Journals (Sweden)

Naveen Kumar

2013-11-01

Full Text Available Surfactants are an essential ingredient for cosmetic, toiletries and personal care products for enhancing their performance. Dimeric surfactants demonstrate superiority compared to conventional surfactants in all areas of application. Dimeric surfactants are extremely promising for utilization in various cosmetic formulations viz. shampoo, lotions, creams, conditioners etc. These surfactants possess extremely unique surface properties viz. lower surface tension, unique micellization, low critical micelle concentration (CMC and antimicrobial activity, higher solubilization etc. Dimerics enhance the performances of cosmetics in an extraordinary manner and provide eco-friendly preparations for human epidermis.

Does better for the environment mean less tasty? Offering more climate-friendly meals is good for the environment and customer satisfaction.

Science.gov (United States)

Visschers, Vivianne H M; Siegrist, Michael

2015-12-01

Food consumption comprises a significant portion of the total environmental impact of households. One way to reduce this impact may be to offer consumers more climate-friendly meal choices, such as when eating out. However, the environmental benefits of such an intervention will depend on not only consumers' liking of the climate-friendlier meals, but also on the perceived environmental impact. We therefore investigated the relationship between the global warming potential (GWP) of and consumers' liking of meals in two field studies in the same restaurant. Visitors to the restaurant were asked to rate the taste of the meal they had just consumed. These taste ratings were then related to the meals' GWP and number of purchases. In the second study, an intervention was tested consisting of a climate-friendly choice label and information posters. Contrary to expectations, it was found in both studies that the GWP of the meals was unrelated to the taste or the number of purchases. Offering more climate-friendly meals did not change consumer satisfaction. As expected, the introduction of the climate-friendly choice label increased the number of climate-friendly meal purchases. Therefore, offering more climate-friendly meals with a climate-friendly choice label can affect consumers' meal choices, but not their preferences or satisfaction, which is beneficial for the climate, consumers and gastronomic establishments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Study on environmental friendly national park management plan: concentrated on the support plan for national park residents

Energy Technology Data Exchange (ETDEWEB)

Park, Yong Ha; Byun, Byoung Seol; Chung, Hoe Seong; Kim, Mi Sook; Kim, Jeong Won; Joo, Yong Joon [Korea Environment Institute, Seoul (Korea)

1999-12-01

National parks in Korea have been selected for preserving beautiful sceneries of nature or diversity of organisms. Today as the increase of population and industrialization has caused the increase of natural resource demand, it is difficult to preserve all ecosystems equally. Therefore the national park system has established to prevent the damage to an ecosystem or to preserve a region that can be damaged by selecting a valuable area. The objective of this study is to recommend an efficient support plan for national park residents, to induce their activities to be environmental friendly and to preserve an ecosystem in a national park. To achieve this, the similar systems, laws and cases in the advanced countries have compared and reviewed and a support plan for residents appropriate for Korean situation has discussed. 41 refs., 4 figs., 33 tabs.

Development of advanced treatment technologies of radio-aqueous waste by an environmental friendly decomposition

Energy Technology Data Exchange (ETDEWEB)

Kim, Kwang Wook; Lee, E. H.; Moon, J. K. and others

2006-01-15

This project was aimed at the technology developments of electrode fabrication, electrolytic reactor design and fabrication, electrolytic processes and the analyses of electroytic reaction mechanisms, which were essential elements for the development of electrolytic systems to decompose or teat environmentally- friendly the several salts contained in waste solutions which are to be generated in the fields of nuclear/non-nuclear industries. Major research items carried our in this project were as follows; - Development of technologies to choose and fabricate the anodes and cathodes for the treatments of waste solutions containing nitrogen compounds and organics. - Development of a membrane electrolyzer stacked by mono-polar unit cells with independent series flow path of electrolytes - Development of an electrolyzer with a self-pH adjustment and an electrolytic process for ammonia decomposition by using the electrolyzer - Analysis of electrolytic reaction mechanism of ammonia - Development of an ion exchange membrane electrolyzer with only one discharge of pH-controlled electrolyte solution - Development of electrolytic dechlorination technology for the treatment of chloride molten salt waste salt from pyroprocess. - Development of technologies for treatment of high concentration nitric acid and recovery of waste organic solvent.

An environmental friendly electrode and extended cathodic potential window for anodic stripping voltammetry of zinc detection

International Nuclear Information System (INIS)

Dueraning, Anisah; Kanatharana, Proespichaya; Thavarungkul, Panote; Limbut, Warakorn

2016-01-01

This work reports on a novel polyeriochrome black T (poly(EBT) modified electrode for use as an environmentally-friendly electrode material that extends the cathodic potential window and improves the sensitivity and repeatability to detect zinc in industrial wastewater. The poly(EBT) film on the GCE surface was fabricated by electropolymerization. The surface morphology and electrochemical behavior of the modified electrode were characterized by scanning electron microscopy, fourier transform infrared spectroscopy and anodic stripping voltammetry. Under optimal conditions, the poly(EBT)/GCE exhibited a high hydrogen overvoltage (extended cathodic potential window). It provided a high sensitivity, a wide linear range (1.0 to 400.0 μg L −1 ), a low detection limit (0.9 μg L −1 ), had excellent repeatability and good recoveries (95% to 105%). This proposed modified electrode was applied to the determination of zinc in wastewater samples, and the results were consistent with those of an inductively coupled plasma atomic emission spectroscopy analysis.

Eco-friendly synthesis of metal dichalcogenides nanosheets and their environmental remediation potential driven by visible light

Science.gov (United States)

Mishra, Ashish Kumar; Lakshmi, K. V.; Huang, Liping

2015-01-01

Exfoliated transition metal dichalcogenides (TMDs) such as WS2 and MoS2 have shown exciting potential for energy storage, catalysis and optoelectronics. So far, solution based methods for scalable production of few-layer TMDs usually involve the use of organic solvents or dangerous chemicals. Here, we report an eco-friendly method for facile synthesis of few-layer WS2 and MoS2 nanosheets using dilute aqueous solution of household detergent. Short time sonication of varying amount of bulk samples in soapy water was used to scale up the production of nanosheets. Thermal stability, optical absorption and Raman spectra of as-synthesized WS2 and MoS2 nanosheets are in close agreement with those from other synthesis techniques. Efficient photocatalytic activity of TMDs nanosheets was demonstrated by decomposing Brilliant Green dye in aqueous solution under visible light irradiation. Our study shows the great potential of TMDs nanosheets for environmental remediation by degrading toxic industrial chemicals in wastewater using sunlight. PMID:26503125

THE IMPACT OF ENVIRONMENTALLY FRIENDLY POSTHARVEST TREATMENTS ON THE ANTIOXIDANT ACTIVITY OF STRAWBERRY FRUITS DURING STORAGE

Directory of Open Access Journals (Sweden)

Ivna Štolfa

2014-12-01

Full Text Available Proper postharvest storage is an effective way to maintain the quality and nutritional values of fruits. The aim of this study was to determine how environmentally friendly postharvest treatments with salicylic acid solution, colloidal silver solution and ozone, affect the antioxidant activity of strawberry fruits (Fragaria x ananassa Duch. cv. Albion during 7 days of storage at 4°C. The content of ascorbic acid, total phenols and antioxidant activity of strawberry fruits were determined spec-trophotometrically. After 7 days of storage in strawberry fruits treated with all three treatments separately, the contents of ascorbic acid were higher than in the control fruits, supporting the usefulness of these treatments for preserving fruit quality and nutritional value during storage. The treatment with salicylic acid solution showed the most beneficial effect during storage causing a significant increase in the content of ascorbic acid, phenols and antioxidant activity at the end of the storage period.

Eco-friendly synthesis of metal dichalcogenides nanosheets and their environmental remediation potential driven by visible light

Science.gov (United States)

Mishra, Ashish Kumar; Lakshmi, K. V.; Huang, Liping

2015-10-01

Exfoliated transition metal dichalcogenides (TMDs) such as WS2 and MoS2 have shown exciting potential for energy storage, catalysis and optoelectronics. So far, solution based methods for scalable production of few-layer TMDs usually involve the use of organic solvents or dangerous chemicals. Here, we report an eco-friendly method for facile synthesis of few-layer WS2 and MoS2 nanosheets using dilute aqueous solution of household detergent. Short time sonication of varying amount of bulk samples in soapy water was used to scale up the production of nanosheets. Thermal stability, optical absorption and Raman spectra of as-synthesized WS2 and MoS2 nanosheets are in close agreement with those from other synthesis techniques. Efficient photocatalytic activity of TMDs nanosheets was demonstrated by decomposing Brilliant Green dye in aqueous solution under visible light irradiation. Our study shows the great potential of TMDs nanosheets for environmental remediation by degrading toxic industrial chemicals in wastewater using sunlight.

STARCH SULFURIC ACID: AN ALTERNATIVE, ECO-FRIENDLY CATALYST FOR BIGINELLI REACTION

Directory of Open Access Journals (Sweden)

Ramin Rezaei

2013-12-01

Full Text Available The one-pot multicomponent synthesis of 3,4-dihydropyrimidinone derivatives using starch sulfuric acid as an environmentally friendly biopolymer-based solid acid catalyst from aldehydes, β-keto esters and urea/ thiourea without solvent is described. Compared with classical Biginelli reaction conditions, this new method has the advantage of minimizing the cost operational hazards and environmental pollution, good yields, shorter reaction times and simple work-up.

ELECTROLESS NICKEL PLATING ON ABS PLASTIC BY USING ENVIRONMENTALLY FRIENDLY CHEMICALS

OpenAIRE

Uraz, Canan

2017-01-01

In this study, electroless nickel (EN) plating onacrylonitrile butadiene styrene (ABS) engineering plastic by usingenvironmentally friendly chemicals were studied. Electroless plating is afundamental step in the metal plating on the plastic. This step makes theplastic conductive and makes it possible to a homogeneous and hard platingwithout using any hazardous and unfriendly chemical such as palladium, tin,etc. In the industry there are many distinct chemical materials both catalystsand activ...

Using budget-friendly methods to analyze sport specific movements

Science.gov (United States)

Jackson, Lindsay; Williams, Sarah; Ferrara, Davon

2015-03-01

When breaking down the physics behind sport specific movements, athletes, usually professional, are often assessed in multimillion-dollar laboratories and facilities. Budget-friendly methods, such as video analysis using low-cost cameras, iPhone sensors, or inexpensive force sensors can make this process more accessible to amateur athletes, which in-turn can give insight into injury mechanisms. Here we present a comparison of two methods of determining the forces experienced by a cheerleader during co-education stunting and soccer goalies while side-diving. For the cheerleader, accelerometer measurements were taken by an iPhone 5 and compared to video analysis. The measurements done on the soccer players were taken using FlexiForce force sensors and again compared to video analysis. While these budget-friendly methods could use some refining, they show promise for producing usable measurements for possibly increasing our understanding of injury in amateur players. Furthermore, low-cost physics experiments with sports can foster an active learning environment for students with minimum physics and mathematical background.

Can Environmental Laws Fulfill Their Promise? Stories from Canada

Directory of Open Access Journals (Sweden)

Nigel Bankes

2014-09-01

Full Text Available Canadian environmental law has changed dramatically over the last 50 years, responding to some of the flaws and weaknesses identified by commentators seeking to explain the continuing trend in environmental degradation. The aim of this article is to tell the story of three pieces of Canadian environmental legislation, the Alberta Land Stewardship Act, the federal Species at Risk Act, and Alberta’s Environmental Protection and Enhancement Act, with a view to exploring whether the environmental ambition underlying these pieces of legislation is being realized. Our overall conclusion is that there is a significant gap between the ambition of these three pieces of environmental legislation and their actual implementation but this gap arises from design choices made by the legislature and the executive, rather than something inherent in the law itself.

Environmentally friendly cellulose-based polyelectrolytes in wastewater treatment.

Science.gov (United States)

Grenda, Kinga; Arnold, Julien; Gamelas, José A F; Rasteiro, Maria G

2017-09-01

Natural-based polyelectrolytes (PELs), with all the advantages coming from being produced from renewable and biodegradable sources, are a potential solution for the removal of dyes from wastewater. In this work, surplus Eucalyptus bleached cellulose fibres from a paper mill were modified to increase the charge and solubility of cellulose. First, reactive aldehyde groups were introduced in the cellulose backbone by periodate oxidation of cellulose. Further modification with alkylammonium produced positively charged cellulose-based PELs. The final products were characterized by several analytical techniques. The PEL with the highest substitution degree of cationic groups was evaluated for its performance in decolouration processes, bentonite being used as aid. This was found to be effective for colour removal of either anionic or cationic dyes. Bio-PELs can thus be considered as very favourable eco-friendly flocculation agents for decolouration of harsh effluents from several industries, considering their biodegradable nature and thus the ability to produce less sludge.

Young friendship in HFASD and typical development: friend versus non-friend comparisons.

Science.gov (United States)

Bauminger-Zviely, Nirit; Agam-Ben-Artzi, Galit

2014-07-01

This study conducted comparative assessment of friendship in preschoolers with high-functioning autism spectrum disorder (HFASD, n = 29) versus preschoolers with typical development (n = 30), focusing on interactions with friends versus acquaintances. Groups were matched on SES, verbal/nonverbal MA, IQ, and CA. Multidimensional assessments included: mothers' and teachers' reports about friends' and friendship characteristics and observed individual and dyadic behaviors throughout interactions with friends versus non-friends during construction, drawing, and free-play situations. Findings revealed group differences in peer interaction favoring the typical development group, thus supporting the neuropsychological profile of HFASD. However, both groups' interactions with friends surpassed interactions with acquaintances on several key socio-communicative and intersubjective capabilities, thus suggesting that friendship may contribute to enhancement and practice of social interaction in HFASD.

A Lithium-Ion Battery with Enhanced Safety Prepared using an Environmentally Friendly Process.

Science.gov (United States)

Mueller, Franziska; Loeffler, Nicholas; Kim, Guk-Tae; Diemant, Thomas; Behm, R Jürgen; Passerini, Stefano

2016-06-08

A new lithium-ion battery chemistry is presented based on a conversion-alloying anode material, a carbon-coated Fe-doped ZnO (TMO-C), and a LiNi1/3 Mn1/3 Co1/3 O2 (NMC) cathode. Both electrodes were fabricated using an environmentally friendly cellulose-based binding agent. The performance of the new lithium-ion battery was evaluated with a conventional, carbonate-based electrolyte (ethylene carbonate:diethyl carbonate-1 m lithium hexafluorophosphate, EC:DEC 1 m LiPF6 ) and an ionic liquid (IL)-based electrolyte (N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide-0.2 m lithium bis(trifluoromethanesulfonyl)imide, Pyr14 TFSI 0.2 m LiTFSI), respectively. Galvanostatic charge/discharge tests revealed a reduced rate capability of the TMO-C/Pyr14 TFSI 0.2 m LiTFSI/NMC full-cell compared to the organic electrolyte, but the coulombic efficiency was significantly enhanced. Moreover, the IL-based electrolyte substantially improves the safety of the system due to a higher thermal stability of the formed anodic solid electrolyte interphase and the IL electrolyte itself. While the carbonate-based electrolyte shows sudden degradation reactions, the IL exhibits a slowly increasing heat flow, which does not constitute a serious safety risk. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

the power and promise of feminist research in environmental

African Journals Online (AJOL)

methods and methodologies in environmental education research. This exploration ... ty of work in environmental education to date has ... Table 1: Ranking of environmental issues by Australian women compared with the scientific- ..... taneous empowerment and disenchantment .... A good deal of poststructural feminist.

Environment-friendly, flame retardant thermoplastic elastomer-magnesium hydroxide composites

Science.gov (United States)

Tang, Hao; Chen, Kunfeng; Li, Xiaonan; Ao, Man; Guo, Xinwen; Xue, Dongfeng

Halogen-free and environment-friendly magnesium hydroxide (Mg(OH)2) was synthesized to enhance the flame retardant properties of thermoplastic elastomer (TPE). When the Mg(OH)2 content was optimized to 35wt.%, the TPE-Mg(OH)2 composites exhibited the best flame retardant properties. The results showed that there was a delay of ignition time of the samples containing Mg(OH)2; compared with the samples without Mg(OH)2, the heat release rate and total heat release decrease by 31.4% and 35.6%, while total smoke production and mass loss rate reduce by 56% and 34.2%, respectively. This work opens a door to manufacture fire-resistant polymer-based composites with environmental-friendly flame retardant additives by controllable crystallization and chemical strategies.

Development of high melting point, environmentally friendly solders, using the calphad approach

DEFF Research Database (Denmark)

Chidambaram, Vivek; Hald, John; Hattel, Jesper Henri

2008-01-01

An attempt has been made using the CALPHAD approach via Thermo-Calc to explore the various possible chemical compositions that adhere to the melting criterion i.e. 270-350 degrees C, required to replace the traditionally used high lead content solders for first level packaging applications. Vario...... tension have also been considered. Special focus has been given to toxicity related issues since the main ideology of looking for an alternative to high lead containing solders is not related to technical issues but due to environmental concerns.......An attempt has been made using the CALPHAD approach via Thermo-Calc to explore the various possible chemical compositions that adhere to the melting criterion i.e. 270-350 degrees C, required to replace the traditionally used high lead content solders for first level packaging applications. Various...... of promising solder alloy candidates. The ternary combinations that satisfied the primary solidification requirement were scrutinized taking into account the commercial interests i.e. availability, cost-effectiveness, recyclability and toxicity issues. Technical issues like manufacturability and surface...

Technology Application of Environmental Friendly Refrigeration (Green Refrigeration) on Cold Storage for Fishery Industry

Science.gov (United States)

Rasta, IM; Susila, IDM; Subagia, IWA

2018-01-01

The application of refrigeration technology to postharvest fishery products is an very important. Moreover, Indonesia is a tropical region with relatively high temperatures. Fish storage age can be prolonged with a decrease in temperature. Frozen fish can even be stored for several months. Fish freezing means preparing fish for storage in low-temperature cold storage. The working fluid used in cold storage to cool low-temperature chambers and throw heat into high-temperature environments is refrigerant. So far refrigerant used in cold storage is Hydrochloroflourocarbons (HCFC) that is R-22. Chlor is a gas that causes ODP (Ozone Depleting Potential), while Flour is a gas that causes GWP (Global Warming Potential). Government policy began in 2015 to implement Hydrochloroflourocarbons Phase-Out Management Plan. Hydrocarbon (HC) is an alternative substitute for R-22. HC-22 (propane ≥ 99.5%) has several advantages, among others: environmentally friendly, indicated by a zero ODP value, and GWP = 3 (negligible), thermophysical property and good heat transfer characteristics, vapor phase density Which is low, and good solubility with mineral lubricants. The use of HC-22 in cold storage is less than R-22. From the analysis results obtained, cold storage system using HC-22 has better performance and energy consumption is more efficient than the R-22.

Biotechnology for uranium extraction and environmental control

International Nuclear Information System (INIS)

Natarajan, K.A.

2012-01-01

India is looking forward to augmenting mining and extraction of uranium mineral for its nuclear energy needs. Being a radio-active mineral, mining and processing of uranium ore deposits need be carried out in an environmentally acceptable fashion. In this respect, a biotechnological approach holds great promise since it is environment-friendly, cost-effective and energy-efficient. There are several types of microorganisms which inhabit uranium ore bodies and biogenesis plays an important role in the mineralisation and transport of uranium-bearing minerals under the earth's crust. Uranium occurrences in India are only meagre and it becomes essential to tap effectively all the available resources. Uraninite and pitchblende occurring along with sulfide mineralisation such as pyrite are ideal candidates for bioleaching. Acidithiobacillus ferrooxidans present ubiquitously in the ore deposits can be isolated, cultured and utilised to bring about efficient acidic dissolution of uranium. Many such commercial attempts to extract uranium from even lean ores using acidophilic autotrophic bacteria have been made in different parts of the world. Anaerobes such a Geobacter and Sulfate Reducing Bacteria (SRB) can be effectively used in uranium mining for environmental control. Radioactive uranium mined wastes and tailing dumps can be cleaned and protected using microorganisms. In this lecture use of biotechnology in uranium extraction and bioremediation is illustrated with practical examples. Applicability of environment-friendly biotechnology for mining and extraction of uranium from Indian deposits is outlined. Commercial potentials for bioremediation in uranium-containing wastes are emphasised. (author)

Effects of benzotriazole on anodized film formed on AZ31B magnesium alloy in environmental-friendly electrolyte

International Nuclear Information System (INIS)

Guo Xinghua; An Maozhong; Yang Peixia; Li Haixian; Su Caina

2009-01-01

An environmental-friendly electrolyte of silicate and borate, which contained an addition agent of 1H-benzotriazole (BTA) with low toxicity (LD50 of 965 mg/kg), was used to prepare an anodized film on AZ31B magnesium alloy under the constant current density of 1.5 A/dm 2 at room temperature. Effects of BTA on the properties of the anodized film were studied by scanning electron microscopy (SEM), energy dispersion spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), loss weight measurement, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS), respectively. The results demonstrated that anodized growth process, surface morphology, thickness, phase structure and corrosion resistance of the anodized film were strongly dependant on the BTA concentration, which might be attributed to the formation of an BTA adsorption layer on magnesium substrate surface. When the BTA concentration was 5 g/L in the electrolyte, a compact and thick anodized film could provide excellent corrosion resistance for AZ31B magnesium alloy.

The determinants of household energy demand in rural Beijing: Can environmentally friendly technologies be effective?

International Nuclear Information System (INIS)

Zhang Jingchao; Kotani, Koji

2012-01-01

use transition. ► Renewable technologies accelerate the transition, and improve energy efficiency. ► Renewable technologies contribute to more environmental-friendly energy consumption.

Eco-friendly synthesis of 4-4-diaminodiphenylurea, a dye intermediate and direct dyes derived from it

International Nuclear Information System (INIS)

Amjad, R.; Khan, S.R.; Naeem, M.; Sohaib, M.; Munawar, M.A.

2011-01-01

A rapid, environmental friendly and highly efficient method for the synthesis of 4-4/sup '/-diaminodiphenyl- urea and direct dyes derived form it has been reported. The reported method is environmentally friendly, as it doesn't involve the usage of environmentally hazardous material like phosgene and tri phosgene. Novel azo dyes have been prepared by the coupling of 4-4/sup '/-Diamino diphenylurea with various couplers. Structure elucidation of the synthesized dyes was carried out by IR, NMR, Elemental analysis, and confirmation was made by Mass Spectrometry. The dyeing performance of these dyes was assessed on cotton fabric. The dye bath exhaustion, sublimation and fastness properties were also determined. The dyed fabric showed moderate to good light fastness and very good to excellent fastness properties for washing, rubbing, perspiration, and sublimation. (author)

Quantifying environmental performance using an environmental footprint calculator

Energy Technology Data Exchange (ETDEWEB)

Smith, D.B.; Loney, A.C.; Chan, V. [Conestoga-Rovers & Associates, Waterloo, Ontario (Canada)

2009-07-01

This paper provides a case study using relevant key performance indicators (KPIs) to evaluate the environmental performance of a business. Using recognized calculation and reporting frameworks, Conestoga-Rovers & Associates (CRA) designed the Environmental Footprint Calculator to quantify the environmental performance of a Canadian construction materials company. CRA designed the Environmental Footprint calculator for our client to track and report their environmental performance in accordance with their targets, based on requirements of relevant guidance documents. The objective was to design a tool that effectively manages, calculates, and reports environmental performance to various stakeholders in a user-friendly format. (author)

Quantifying environmental performance using an environmental footprint calculator

International Nuclear Information System (INIS)

Smith, D.B.; Loney, A.C.; Chan, V.

2009-01-01

This paper provides a case study using relevant key performance indicators (KPIs) to evaluate the environmental performance of a business. Using recognized calculation and reporting frameworks, Conestoga-Rovers & Associates (CRA) designed the Environmental Footprint Calculator to quantify the environmental performance of a Canadian construction materials company. CRA designed the Environmental Footprint calculator for our client to track and report their environmental performance in accordance with their targets, based on requirements of relevant guidance documents. The objective was to design a tool that effectively manages, calculates, and reports environmental performance to various stakeholders in a user-friendly format. (author)

Simple and environmentally friendly preparation and size control of silver nanoparticles using an inhomogeneous system with silver-containing glass powder

International Nuclear Information System (INIS)

Mori, Yasutaka; Tagawa, Toshio; Fujita, Masanori; Kuno, Toyohiko; Suzuki, Satoshi; Matsui, Takemi; Ishihara, Masayuki

2011-01-01

A simple, environmentally friendly method for preparing highly size-controlled spherical silver nanoparticles was developed that involved heating a mixture of silver-containing glass powder and an aqueous solution of glucose. The stabilizing agent for silver nanoparticles was found to be caramel, which was generated from glucose when preparing the nanoparticles. The particle size was independent of the reaction time, but it increased proportionally with the square root of the glucose concentration in the range 0.25–8.0 wt% (corresponding to particle sizes of 3.48 ± 1.83 to 20.0 ± 2.76 nm). Difference of the generation mechanism of silver nanoparticles between this inhomogeneous system and a system in which Ag + was homogeneously dispersed was discussed.

Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (feasibility study of the environmentally friendly type coal utilization system in India); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Indo ni okeru kankyo chowagata sekitan riyo system kanosei chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The survey was conducted of the present situation of coal utilization and the present coal situation such as the environmental state of India which is a coal producing/consuming country next to China in Asia. The paper studied a feasibility of the introduction of the environmental friendly type coal utilization system` to be planned in India. The items for survey are the present situation of economy and energy and the future trend, environmental problems on coal utilization, the present status of the coal distribution system and study subjects, the present status of coal utilization by field and study subjects, a possibility of briquette use, a possibility of coal fluidization, electric power development plans and coal combustion technology in each industry, etc. The subjects are the obligation of coal preparation to coal thermal power plants 1000 km away from coal mines starting 2001, measures taken for effective ash use, measures taken for superannuated gas furnaces, etc. Based on the results of these site surveys and reports of the investigation under consignment from CMPDI, the paper studied/analyzed possibilities of introducing the coal utilization system having actual introduction results in Japan to India, and made an investigational report. 39 refs., 12 figs., 56 tabs.

Cooking with Active Oxygen and Solid Alkali: A Promising Alternative Approach for Lignocellulosic Biorefineries.

Science.gov (United States)

Jiang, Yetao; Zeng, Xianhai; Luque, Rafael; Tang, Xing; Sun, Yong; Lei, Tingzhou; Liu, Shijie; Lin, Lu

2017-10-23

Lignocellulosic biomass, a matrix of biopolymers including cellulose, hemicellulose, and lignin, has gathered increasing attention in recent years for the production of chemicals, fuels, and materials through biorefinery processes owing to its renewability and availability. The fractionation of lignocellulose is considered to be the fundamental step to establish an economical and sustainable lignocellulosic biorefinery. In this Minireview, we summarize a newly developed oxygen delignification for lignocellulose fractionation called cooking with active oxygen and solid alkali (CAOSA), which can fractionate lignocellulose into its constituents and maintain its processable form. In the CAOSA approach, environmentally friendly chemicals are applied instead of undesirable chemicals such as strong alkalis and sulfides. Notably, the alkali recovery for this process promises to be relatively simple and does not require causticizing or sintering. These features make the CAOSA process an alternative for both lignocellulose fractionation and biomass pretreatment. The advantages and challenges of CAOSA are also discussed to provide a comprehensive perspective with respect to existing strategies. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Easy, fast and environmental friendly method for the simultaneous extraction of the 16 EPA PAHs using magnetic molecular imprinted polymers (mag-MIPs).

Science.gov (United States)

Villar-Navarro, Mercedes; Martín-Valero, María Jesús; Fernández-Torres, Rut Maria; Callejón-Mochón, Manuel; Bello-López, Miguel Ángel

2017-02-15

An easy and environmental friendly method, based on the use of magnetic molecular imprinted polymers (mag-MIPs) is proposed for the simultaneous extraction of the 16 U.S. EPA polycyclic aromatic hydrocarbons (PAHs) priority pollutants. The mag-MIPs based extraction protocol is simple, more sensitive and low organic solvent consuming compared to official methods and also adequate for those PAHs more retained in the particulate matter. The new proposed extraction method followed by HPLC determination has been validated and applied to different types of water samples: tap water, river water, lake water and mineral water. Copyright © 2017 Elsevier B.V. All rights reserved.

Eco-Friendly Magnetic Iron Oxide Pillared Montmorillonite for Advanced Catalytic Degradation of Dichlorophenol

Science.gov (United States)

Eco-friendly pillared montmorillonites, in which the pillars consist of iron oxide are expected to have interesting and unusual magnetic properties that are applicable for environmental decontamination. Completely “green” and effective composite was synthesized using mild reactio...

Friends Like Me: Associations in Overweight/Obese Status among Adolescent Friends by Race/Ethnicity, Sex, and Friendship Type.

Science.gov (United States)

Bruening, Meg; MacLehose, Richard; Eisenberg, Marla E; Kim, Sunkyung; Story, Mary; Neumark-Sztainer, Dianne

2015-12-01

Little is known about how interpersonal friend relationships are associated with obesity in young people, particularly with regard to how race/ethnicity, type of friendship, and sex affect the association between friends' and adolescents' weight status. This study examined associations in weight status among adolescents and their friends, exploring magnitudes of associations across friendship type, sex, and race/ethnicity. As part of EAT-2010 (Eating and Activity in Teens), friend nominations and anthropometrics were obtained from adolescents (n = 2099: 54% female; 80% nonwhite; mean age: 14.2 ± 1.9 years). Generalized estimating equation logistic regression models were used to test associations between adolescents' overweight/obese status and friends' (i.e., friend group, female friends, male friends, female best friends, and male best friends) overweight/obese status. Interactions by adolescent race/ethnicity were examined. The majority of significant associations were observed among white female adolescents' who had a 22-40% higher prevalence of overweight/obesity if their friends were overweight compared to white females whose friends were not overweight. In contrast, there were few significant differences for other adolescent female and male racial/ethnic groups for girls and boys. Results for friend groups and best friends were generally similar to one another. The association between friend and adolescent overweight/obese status depended on adolescents' sex, race/ethnicity, and friendship type. Given the similarities among friends, obesity interventions targeting youth, especially white females, should consider involving friends.

Environmental policy and the energy efficiency of vertically differentiated consumer products

International Nuclear Information System (INIS)

Brzeskot, Magdalena; Haupt, Alexander

2013-01-01

We analyse optimal environmental policies in a market that is vertically differentiated in terms of the energy efficiency of products. Considering energy taxes, subsidies to firms for investment in more eco-friendly products, and product standards, we are particularly interested in how distributional goals in addition to environmental goals shape the choice of policy instruments. We find that an industry-friendly government levies an energy tax to supplement a lax product standard, but shies away from subsidies to firms. By contrast, a consumer-friendly government relies heavily on a strict product standard and additionally implements a moderate subsidy to firms, but avoids energy taxes. - Highlights: ► We analyse how distributional goals shape environmental policy. ► Firms invest in the energy efficiency of their products and compete in prices. ► An industry-friendly government implements an energy tax and a lax product standard. ► A consumer-friendly government chooses a subsidy to firms instead of an energy tax. ► A consumer-friendly government implements a strict energy efficiency standard

Friend Finder (Game)

Science.gov (United States)

... for a spot on the Friend Finder All-Star List. Earn your spot by showing you're savvy when it comes to making friends online . Downloads Please download and share our ... Email Updates Blog Feed Facebook YouTube Twitter The Federal Trade Commission (FTC) is the ...

Environmental groups in politics

International Nuclear Information System (INIS)

Lowe, P.; Goyder, J.

1983-01-01

The subject is covered in chapters, entitled: introduction; (Part I) the environmental movement (environmental groups and the attentive public; the episodic development of the environmental movement; the underlying values of environmentalism; the roots of environmental concern; the social limits to growth; elite manipulation of values); the organisation of environmental groups; environmental groups in national politics; environmental groups in local politics; (Part II) the Henley Society; Friends of the Earth; the National Trust; the Royal Society for Nature Conservation; the European Environmental Bureau. (U.K.)

Lobbying friends and foes in climate policy: The case of business and environmental interest groups in the European Union

International Nuclear Information System (INIS)

Gullberg, Anne Therese

2008-01-01

Drawing on two conflicting hypotheses from the theoretical literature on lobbying, I consider the strategies applied by interest groups lobbying to influence climate policy in the European Union (EU). The first hypothesis claims that interest groups lobby their 'friends', decision-makers with positions similar to their own. The second claims that interest groups lobby their 'foes', decision-makers with positions opposed to their own. Using interviews with lobbyists and decision-makers, I demonstrate that in the field of climate policy, interest groups in the EU lobby both friends and foes, but under different conditions. Moreover, I find that the interest groups' motives are not always in line with the theoretical hypotheses. Interest groups lobby their friends on single policy decisions to exchange information, to further a common cause and to exert pressure, and their foes because a foe on one issue might prove to be a friend on another issue. Interest groups direct general lobbying towards both friends and foes. This paper provides a new empirical contribution to a literature that has so far been heavily dominated by studies focusing on lobbying in the US

Does environmental archaeology need an ethical promise?

DEFF Research Database (Denmark)

Riede, Felix; Andersen, Per; Price, Neil

2016-01-01

societies in Europe?s prehistory. We ask whether cases of past calamities and their societal effects should play a greater role in public debates and whether archaeologists working with past environmental hazards should be more outspoken in their ethical considerations. We offer no firm answers, but suggest...

An environmental friendly animal waste disposal process with ammonia recovery and energy production: Experimental study and economic analysis.

Science.gov (United States)

Shen, Ye; Tan, Michelle Ting Ting; Chong, Clive; Xiao, Wende; Wang, Chi-Hwa

2017-10-01

Animal manure waste is considered as an environmental challenge especially in farming areas mainly because of gaseous emission and water pollution. Among all the pollutants emitted from manure waste, ammonia is of greatest concern as it could contribute to formation of aerosols in the air and could hardly be controlled by traditional disposal methods like landfill or composting. On the other hand, manure waste is also a renewable source for energy production. In this work, an environmental friendly animal waste disposal process with combined ammonia recovery and energy production was proposed and investigated both experimentally and economically. Lab-scale feasibility study results showed that 70% of ammonia in the manure waste could be converted to struvite as fertilizer, while solid manure waste was successfully gasified in a 10kW downdraft fixed-bed gasifier producing syngas with the higher heating value of 4.9MJ/(Nm 3 ). Based on experimental results, economic study for the system was carried out using a cost-benefit analysis to investigate the financial feasibility based on a Singapore case study. In addition, for comparison, schemes of gasification without ammonia removal and incineration were also studied for manure waste disposal. The results showed that the proposed gasification-based manure waste treatment process integrated with ammonia recovery was most financially viable. Copyright © 2017 Elsevier Ltd. All rights reserved.

Environmentally-Friendly Synthesis of Carbonate-Type Macrodiols and Preparation of Transparent Self-Healable Thermoplastic Polyurethanes

Directory of Open Access Journals (Sweden)

Seon-Mi Kim

2017-11-01

Full Text Available Carbonate-type macrodiols synthesized by base-catalyzed polycondensation of co-diols and dimethyl carbonate as an environmentally-friendly route were subsequently utilized for the preparation of transparent and self-healable thermoplastic polyurethanes (TPUs containing a carbonate-type soft segment. Three types of macrodiols, obtained from mono, dual and triple diol-monomers for target molecular weights of 1 and 1.5 kg mol−1, were analyzed by 1H NMR integration and the OH titration value. Colorless transparent macrodiols in a liquid state at a room temperature of 20 °C were obtained, except the macrodiol from mono 1,6-hexanediol. Before TPU synthesis, macrodiols require pH neutralization to prevent gelation. TPUs synthesized by a solution pre-polymer method with 4,4′-methylene(bisphenyl isocyanate and 1,4-butanediol as a chain extender exhibited moderate molecular weights, good transparencies and robust mechanical properties. Especially, the incorporation of 3-methyl-1,5-pentanediol within carbonate-type macrodiols enhanced the transparency of the resultant TPUs by decreasing the degree of microphase separation evidenced by ATR-FTIR and DSC. Interestingly, packing density of hard segments and the degree of microphase separation determined the self-healing efficiency of TPUs, which showed good performances in the case of sourced macrodiols from triple diol-monomers.

Rehabilitation of Problem Soils Through Environmental Friendly Technologies-I: Effect of Sabins and Farmyard Manure

International Nuclear Information System (INIS)

Baig, Mirza B.; Ziaeldin, Mohammad S.; Mahler, Robert L.

2004-01-01

Environmental problem due to land degradation in the developing countries have been a matter of great cocern for the decades. The rehabilitation of problem land has been through many chemical means and engineering approaches, that have resulted in enhancing the gravity and the magnitude of problems. The present studies were undertaken to examine the role of environmental friendly practices to address the salinity issue. the effect of organic manuring (green manure and farmyard manure) or rice was investigated in a field study on a saline-sodic soil of the Saline Agriculture Research Station, Sadhuke, Pakistan. Sesbania was grown as a green manuring crop for two months and then incorporated into soil. farmyard manure (FYM) was applied at the rate of 0, 5, 10 and 20/ha before the sowing of Sesbania. Rice,Cv. Basmati 385 was used as the indicator/test crop. Results revealed that both paddy and straw yields were significantly improved by the application of sesbina and FYM. Green manure with sesbina improved the paddy and straw yields by 15.4% and 14.5% respectively. Productive tillers were also increased by the application of FYM but difference were not significant between 10 and 20ha/ of FYM application. FYM application also improved the paddy and straw yield significantly. The incrase in paddy yield due to application of 5, 10 and 20/ha of FYM were 6.8%, 24.4% and 37.6% over control, respectively. Nitrogen and phosphprus utilizationn by rice were also significantly improved with the application of green manure. Nitrogen uptake by rice was incresed by 17.8% and that of phosphorus by 21.9% with the green manuring. Nitrogen uptake was significantlty increased by the application of different rates of FYM. Also phosphorus uptake was increased significantly with the application of FYM. (author)

Environmentally Friendly Luxury Hotel : case: Grand Palace Hotel, Riga, Latvia

OpenAIRE

Losanwe, Ieva

2013-01-01

Chemical pollution, loss of biodiversity, ecological and other to environmental issues addressing words are often heard in todays’ society. Sustainability and especially its environmental aspect are growing trend. Environmental sustainability is considerable issues as well in tourism industry. Hotels can decrease their negative impact on environment by following and implementing environmentally sustainable practices at their business. Any step towards sustainability benefits both the environm...

LiNbO3 Coating on Concrete Surface: A New and Environmentally Friendly Route for Artificial Photosynthesis

Directory of Open Access Journals (Sweden)

Ranjit K. Nath

2013-01-01

Full Text Available The addition of a photocatalyst to ordinary building materials such as concrete creates environmentally friendly materials by which air pollution or pollution of the surface can be diminished. The use of LiNbO3 photocatalyst in concrete material would be more beneficial since it can produce artificial photosynthesis in concrete. In these research photoassisted solid-gas phases reduction of carbon dioxide (artificial photosynthesis was performed using a photocatalyst, LiNbO3, coated on concrete surface under illumination of UV-visible or sunlight and showed that LiNbO3 achieved high conversion of CO2 into products despite the low levels of band-gap light available. The high reaction efficiency of LiNbO3 is explained by its strong remnant polarization (70 µC/cm2, allowing a longer lifetime of photoinduced carriers as well as an alternative reaction pathway. Due to the ease of usage and good photocatalytic efficiency, the research work done showed its potential application in pollution prevention.

Ionic Liquids: An Environmentally Friendly Media for Nucleophilic Substitution Reactions

International Nuclear Information System (INIS)

Jorapur, Yogesh R.; Chi, Dae Yoon

2006-01-01

Ionic liquids are alternative reaction media of increasing interest and are regarded as an eco-friendly alternatives, of potential use in place of the volatile organic solvents typically used in current chemical processing methods. They are emerging as the smart and excellent solvents, which are made of positive and negative ions that they are liquids near room temperature. The nucleophilic substitution reaction is one of the important method for inserting functional groups into a carbon skeleton. Many nucleophilic substitution reactions have been found with enhanced reactivity and selectivity in ionic liquid. In this review, some recent interesting results of nucleophilic substitution reactions such as hydroxylations, ether cleavages, carbon-X (X = carbon, oxygen, nitrogen, fluorine) bond forming reactions, and ring opening of epoxides in ionic liquids are discussed

Hydrogel-coated feed spacers in two-phase flow cleaning in spiral wound membrane elements: a novel platform for eco-friendly biofouling mitigation.

Science.gov (United States)

Wibisono, Yusuf; Yandi, Wetra; Golabi, Mohsen; Nugraha, Roni; Cornelissen, Emile R; Kemperman, Antoine J B; Ederth, Thomas; Nijmeijer, Kitty

2015-03-15

Biofouling is still a major challenge in the application of nanofiltration and reverse osmosis membranes. Here we present a platform approach for environmentally friendly biofouling control using a combination of a hydrogel-coated feed spacer and two-phase flow cleaning. Neutral (polyHEMA-co-PEG10MA), cationic (polyDMAEMA) and anionic (polySPMA) hydrogels have been successfully grafted onto polypropylene (PP) feed spacers via plasma-mediated UV-polymerization. These coatings maintained their chemical stability after 7 days incubation in neutral (pH 7), acidic (pH 5) and basic (pH 9) environments. Anti-biofouling properties of these coatings were evaluated by Escherichia coli attachment assay and nanofiltration experiments at a TMP of 600 kPag using tap water with additional nutrients as feed and by using optical coherence tomography. Especially the anionic polySPMA-coated PP feed spacer shows reduced attachment of E. coli and biofouling in the spacer-filled narrow channels resulting in delayed biofilm growth. Employing this highly hydrophilic coating during removal of biofouling by two-phase flow cleaning also showed enhanced cleaning efficiency, feed channel pressure drop and flux recoveries. The strong hydrophilic nature and the presence of negative charge on polySPMA are most probably responsible for the improved antifouling behavior. A combination of polySPMA-coated PP feed spacers and two-phase flow cleaning therefore is promising and an environmentally friendly approach to control biofouling in NF/RO systems employing spiral-wound membrane modules. Copyright © 2015 Elsevier Ltd. All rights reserved.

Conceptual design of cost-effective and environmentally-friendly configurations for fuel ethanol production from sugarcane by knowledge-based process synthesis.

Science.gov (United States)

Sánchez, Óscar J; Cardona, Carlos A

2012-01-01

In this work, the hierarchical decomposition methodology was used to conceptually design the production of fuel ethanol from sugarcane. The decomposition of the process into six levels of analysis was carried out. Several options of technological configurations were assessed in each level considering economic and environmental criteria. The most promising alternatives were chosen rejecting the ones with a least favorable performance. Aspen Plus was employed for simulation of each one of the technological configurations studied. Aspen Icarus was used for economic evaluation of each configuration, and WAR algorithm was utilized for calculation of the environmental criterion. The results obtained showed that the most suitable synthesized flowsheet involves the continuous cultivation of Zymomonas mobilis with cane juice as substrate and including cell recycling and the ethanol dehydration by molecular sieves. The proposed strategy demonstrated to be a powerful tool for conceptual design of biotechnological processes considering both techno-economic and environmental indicators. Copyright © 2011 Elsevier Ltd. All rights reserved.

Can Naturbanization Promote Environmentally Friendly Built-Up Areas? A Comparison Between Cadí-Moixeró (Catalonia, Spain and Comana (Romania Natural Parks

Directory of Open Access Journals (Sweden)

Tulla Antoni-Francesc

2017-12-01

Full Text Available The study compares the on-going naturbanization processes in and around two Natural Parks under the impact of newcomers, but also tourists from Barcelona and Bucharest and their metropolitan areas. The landscape value of these areas attracts the urban population, which contributes to local sustainable development process but also promotes construction. New businesses associated with rural multifunctionality and value-added activities related to environmental quality were identified. New residents have contributed introducing responsible patterns of consumer, ecoentrepreneurship by women, recovery of abandoned buildings and intensification of rural-urban relationships. Negative impacts such as intensive construction of second homes, with a lower use, in some areas around Cadí-Moixeró threaten biodiversity and habitat connectivity. Insufficient integration of environmental policies, particularly in the Comana wetlands, reduces the potential for rural renewal. Research methods included a review of the counterurbanization literature and the statistical data related to processes of naturbanization in both areas, along with the conduct of 30 structured interviews with key local actors in each area. Naturbanization still offers the potential to enhance local development; however, it is urgent to assess social perspectives in natural parks management in order to achieve environmentally friendly built-up areas.

Swedish Upper Secondary School Students’ Conceptions of Negative Environmental Impact and Pricing

Directory of Open Access Journals (Sweden)

Cecilia Lundholm

2013-03-01

Full Text Available This study explores relationships between upper secondary school students’ understanding of prices and environmental impacts. The study uses responses from 110 students to problems in which they were asked to explain differences in prices and also to express and justify opinions on what should be the difference in prices. Very few students expressed an environmental dimension in their understanding of price. A few students suggested that environmental impact influenced price by raising demand for “Environmentally friendly products”. A few students suggested that ‘environmentally friendly products’ had higher prices because they were more costly to produce. We found no examples of students combining both lines of explanation. However, nearly half of the students believed that prices should reflect environmental effects, and this reasoning was divided between cases where the point was justified by a broad environmental motivation and cases where the point was justified in relation to incentives–to get consumers to act in a more environmentally friendly way.

"Friends" of Anglican Cathedrals: Norms and Values. Befriending, Friending or Misnomer?

Science.gov (United States)

Muskett, Judith A.

2013-01-01

Loyal supporters of Anglican cathedrals first subscribed to "Friends" associations in the late 1920s. Yet, in 1937, a journalist in "The Times" portrayed cathedrals as a "queer thing to be a friend of." Drawing on theories of friendship from a range of disciplines, and surveys of what has been proclaimed in the public…

Anticipating Early Fatality: Friends', Schoolmates' and Individual Perceptions of Fatality on Adolescent Risk Behaviors

Science.gov (United States)

Soller, Brian; Williams, Kristi

2015-01-01

Past research indicates that anticipating adverse outcomes, such as early death (fatalism), is associated positively with adolescents' likelihood of engaging in risky behaviors. Health researchers and criminologists have argued that fatalism influences present risk taking in part by informing individuals' motivation for delaying gratification for the promise of future benefits. While past findings highlight the association between the anticipation of early death and a number of developmental outcomes, no known research has assessed the impact of location in a context characterized by high perceptions of fatality. Using data from Add Health and a sample of 9,584 adolescents (51 % female and 71 % white) nested in 113 schools, our study builds upon prior research by examining the association between friends', school mates', and individual perceptions of early fatality and adolescent risk behaviors. We test whether friends' anticipation of being killed prior to age 21 or location in a school where a high proportion of the student body subscribes to attitudes of high fatality, is associated with risky behaviors. Results indicate that friends' fatalism is positively associated with engaging in violent delinquency, non-violent delinquency, and drug use after controlling for individual covariates and prior individual risk-taking. Although friends' delinquency accounts for much of the effect of friends' fatalism on violence, none of the potential intervening variables fully explain the effect of friends' fatalism on youth involvement in nonviolent delinquency and drug use. Our results underscore the importance of friendship contextual effects in shaping adolescent risk-taking behavior and the very serious consequences perceptions of fatality have for adolescents' involvement in delinquency and drug use. PMID:23828725

Eco-friendly surface modification on polyester fabrics by esterase treatment

Energy Technology Data Exchange (ETDEWEB)

Wu, Jindan; Cai, Guoqiang; Liu, Jinqiang; Ge, Huayun; Wang, Jiping, E-mail: jipingwanghz@gmail.com

2014-03-01

Graphical abstract: - Highlights: • We used a simple and easy way to measure the enzyme activity. • We studied the mechanism by characterizing the chemical changes in the surface of fabric. • We studied the advantages in surface wettability, fiber integrity and mechanical performance of cutinase treated fabrics. • Cutinase pretreated fibers exhibited much improved fabric wicking and better fiber integrity comparing to alkali treated ones. • Cutinase pretreatment technology promotes energy conservation and emission reduction. - Abstract: Currently, traditional alkali deweighting technology is widely used to improve the hydrophilicity of polyester fabrics. However, the wastewater and heavy chemicals in the effluent cause enormous damage to the environment. Esterase treatment, which is feasible in mild conditions with high selectivity, can provide a clean and efficient way for polyester modification. Under the optimum conditions, the polyester fabric hydrolysis process of esterase had a linear kinetics. X-ray photoelectron spectrometry (XPS) results showed that hydroxyl and carboxyl groups were produced only on the surface of modified fiber without changing the chemical composition of the bulk. These fibers exhibited much improved fabric wicking, as well as greatly improved oily stain removal performance. Compared to the harsh alkali hydrolysis, the enzyme treatment led to smaller weight loss and better fiber integrity. The esterase treatment technology is promising to produce higher-quality polyester textiles with an environmental friendly approach.

Green dentistry, a metamorphosis towards an eco-friendly dentistry: a short communication.

Science.gov (United States)

Rastogi, Varun; Sharma, Rachna; Yadav, Lalita; Satpute, Pranali; Sharma, Vandana

2014-07-01

Dentistry is most importantly and foremost a healing profession. In today's world, it is very necessary to understand the importance of being eco-friendly in every facet of our lives, including dental practice which has a huge impact on the environment due to the large amount of metallic waste generated by various dental procedures along with excessive use of water and electricity, which specifically emphasis the thrust to move towards 'Green dentistry'. Green dentistry is an innovative way of dental practice which is environment friendly and at the same time conserves money and time by reducing waste, conserving energy and decreasing pollution with the use of latest techniques and procedures. Green dentistry therefore, protects the environment and mankind from the hazards of rapid urbanisation in developing countries. The authors wish to emphasize the practice of eco-friendly, green dentistry in a developing country like India which needs to conserve resources and curb environmental pollution.

Evaluating Sustainability of Household Consumption Using DEA to Assess Environmental Performance

DEFF Research Database (Denmark)

Christoffersen, Line Block; Jensen, Trine Susanne; Wier, Mette

2005-01-01

We assess environmental performance across product types and across household types in order to evaluate environmental pressure from human activities. To so do, we combine family budget statistics, input-output tables, energy and material flow matrices, various types of emissions and environmenta...... friendly consumption pattern. Middle income families living in houses have the least environmentally friendly consumer basket, and these families constitute a high share of all families in Denmark....

Marketing animal-friendly products

NARCIS (Netherlands)

Riemsdijk, van Lenka; Ingenbleek, Paul T.M.; Trijp, van Hans C.M.; Veen, van der Gerrita

2017-01-01

This article presents a conceptual framework that aims to encourage consumer animal-friendly product choice by introducing positioning strategies for animal-friendly products. These strategies reinforce the animal welfare with different types of consumption values and can therefore reduce

A rapid and user-friendly assay to detect the Neutrophil gelatinase-associated lipocalin (NGAL) using up-converting nanoparticles.

Science.gov (United States)

Lei, Lijiang; Zhu, Jin; Xia, Gangqiang; Feng, Hui; Zhang, Hongman; Han, Yuwang

2017-01-01

NGAL is a promising novel biomarker for acute kidney injury (AKI) and chronic kidney disease (CKD). More rapid and user-friendly methods are needed for the timely monitoring of NGAL in human urine and serum. UCP technology-based lateral flow assay (UPT-LFA) was developed for rapid, user-friendly and quantitative detection of the NGAL in human serum specimens and urine specimens. Under optimal conditions, the UPT-LFA displayed a rapid response to NGAL with a LOD of 7.68ng/mL and detection range from 7.68 to 1000ng/mL. The UPT-LFA method was compared with commercial immunoturbidimetry (103 urine specimens), and by ELISA (26 serum specimens), respectively. The results demonstrated that the UPT-LFA was consistent with immunoturbidimetry assay, reporting a 97.92% of positive and 92.73% of negative coincidence rates, respectively. Meanwhile, the concordance rate between UPT-LFA and ELISA, as shown by correlative regression analysis, was also high (R 2 =0.95). The whole assay can be completed within 30min compared to 4h consuming with ELISA. The research implies that, the UPT-LFA provides a potential to be used in point of care testing (POCT) to define early acute kidney injury with advantages of user-friendly and rapid testing, promising this new assay a bright future. Copyright © 2016 Elsevier B.V. All rights reserved.

Indicators of activity-friendly communities: an evidence-based consensus process.

Science.gov (United States)

Brennan Ramirez, Laura K; Hoehner, Christine M; Brownson, Ross C; Cook, Rebeka; Orleans, C Tracy; Hollander, Marla; Barker, Dianne C; Bors, Philip; Ewing, Reid; Killingsworth, Richard; Petersmarck, Karen; Schmid, Thomas; Wilkinson, William

2006-12-01

Regular physical activity, even at modest intensities, is associated with many health benefits. Most Americans, however, do not engage in the recommended levels. As practitioners seek ways to increase population rates of physical activity, interventions and advocacy efforts are being targeted to the community level. Yet, advocates, community leaders, and researchers lack the tools needed to assess local barriers to and opportunities for more active, healthy lifestyles. Investigators used a systematic review process to identify key indicators of activity-friendly communities that can assess and improve opportunities for regular physical activity. Investigators conducted a comprehensive literature review of both peer-reviewed literature and fugitive information (e.g., reports and websites) to generate an initial list of indicators for review (n=230). The review included a three-tiered, modified Delphi consensus-development process that incorporated input of international, national, state, and local researchers and practitioners from academic institutions, federal and state government agencies, nonprofit organizations, and funding agencies in public health, transportation, urban planning, parks and recreation, and public policy. Ten promising indicators of activity-friendly communities were identified: land use environment, access to exercise facilities, transportation environment, aesthetics, travel patterns, social environment, land use economics, transportation economics, institutional and organizational policies, and promotion. Collaborative, multidisciplinary approaches are underway to test, refine, and expand this initial list of indicators and to develop measures that communities, community leaders, and policymakers can use to design more activity-friendly community environments.

Real-time fMRI pattern decoding and neurofeedback using FRIEND: an FSL-integrated BCI toolbox.

Science.gov (United States)

Sato, João R; Basilio, Rodrigo; Paiva, Fernando F; Garrido, Griselda J; Bramati, Ivanei E; Bado, Patricia; Tovar-Moll, Fernanda; Zahn, Roland; Moll, Jorge

2013-01-01

The demonstration that humans can learn to modulate their own brain activity based on feedback of neurophysiological signals opened up exciting opportunities for fundamental and applied neuroscience. Although EEG-based neurofeedback has been long employed both in experimental and clinical investigation, functional MRI (fMRI)-based neurofeedback emerged as a promising method, given its superior spatial resolution and ability to gauge deep cortical and subcortical brain regions. In combination with improved computational approaches, such as pattern recognition analysis (e.g., Support Vector Machines, SVM), fMRI neurofeedback and brain decoding represent key innovations in the field of neuromodulation and functional plasticity. Expansion in this field and its applications critically depend on the existence of freely available, integrated and user-friendly tools for the neuroimaging research community. Here, we introduce FRIEND, a graphic-oriented user-friendly interface package for fMRI neurofeedback and real-time multivoxel pattern decoding. The package integrates routines for image preprocessing in real-time, ROI-based feedback (single-ROI BOLD level and functional connectivity) and brain decoding-based feedback using SVM. FRIEND delivers an intuitive graphic interface with flexible processing pipelines involving optimized procedures embedding widely validated packages, such as FSL and libSVM. In addition, a user-defined visual neurofeedback module allows users to easily design and run fMRI neurofeedback experiments using ROI-based or multivariate classification approaches. FRIEND is open-source and free for non-commercial use. Processing tutorials and extensive documentation are available.

Real-time fMRI pattern decoding and neurofeedback using FRIEND: an FSL-integrated BCI toolbox.

Directory of Open Access Journals (Sweden)

João R Sato

Full Text Available The demonstration that humans can learn to modulate their own brain activity based on feedback of neurophysiological signals opened up exciting opportunities for fundamental and applied neuroscience. Although EEG-based neurofeedback has been long employed both in experimental and clinical investigation, functional MRI (fMRI-based neurofeedback emerged as a promising method, given its superior spatial resolution and ability to gauge deep cortical and subcortical brain regions. In combination with improved computational approaches, such as pattern recognition analysis (e.g., Support Vector Machines, SVM, fMRI neurofeedback and brain decoding represent key innovations in the field of neuromodulation and functional plasticity. Expansion in this field and its applications critically depend on the existence of freely available, integrated and user-friendly tools for the neuroimaging research community. Here, we introduce FRIEND, a graphic-oriented user-friendly interface package for fMRI neurofeedback and real-time multivoxel pattern decoding. The package integrates routines for image preprocessing in real-time, ROI-based feedback (single-ROI BOLD level and functional connectivity and brain decoding-based feedback using SVM. FRIEND delivers an intuitive graphic interface with flexible processing pipelines involving optimized procedures embedding widely validated packages, such as FSL and libSVM. In addition, a user-defined visual neurofeedback module allows users to easily design and run fMRI neurofeedback experiments using ROI-based or multivariate classification approaches. FRIEND is open-source and free for non-commercial use. Processing tutorials and extensive documentation are available.

Real-Time fMRI Pattern Decoding and Neurofeedback Using FRIEND: An FSL-Integrated BCI Toolbox

Science.gov (United States)

Sato, João R.; Basilio, Rodrigo; Paiva, Fernando F.; Garrido, Griselda J.; Bramati, Ivanei E.; Bado, Patricia; Tovar-Moll, Fernanda; Zahn, Roland; Moll, Jorge

2013-01-01

The demonstration that humans can learn to modulate their own brain activity based on feedback of neurophysiological signals opened up exciting opportunities for fundamental and applied neuroscience. Although EEG-based neurofeedback has been long employed both in experimental and clinical investigation, functional MRI (fMRI)-based neurofeedback emerged as a promising method, given its superior spatial resolution and ability to gauge deep cortical and subcortical brain regions. In combination with improved computational approaches, such as pattern recognition analysis (e.g., Support Vector Machines, SVM), fMRI neurofeedback and brain decoding represent key innovations in the field of neuromodulation and functional plasticity. Expansion in this field and its applications critically depend on the existence of freely available, integrated and user-friendly tools for the neuroimaging research community. Here, we introduce FRIEND, a graphic-oriented user-friendly interface package for fMRI neurofeedback and real-time multivoxel pattern decoding. The package integrates routines for image preprocessing in real-time, ROI-based feedback (single-ROI BOLD level and functional connectivity) and brain decoding-based feedback using SVM. FRIEND delivers an intuitive graphic interface with flexible processing pipelines involving optimized procedures embedding widely validated packages, such as FSL and libSVM. In addition, a user-defined visual neurofeedback module allows users to easily design and run fMRI neurofeedback experiments using ROI-based or multivariate classification approaches. FRIEND is open-source and free for non-commercial use. Processing tutorials and extensive documentation are available. PMID:24312569

Realizing a facile and environmental-friendly fabrication of high-performance multi-crystalline silicon solar cells by employing ZnO nanostructures and an Al2O3 passivation layer

Science.gov (United States)

Chen, Hong-Yan; Lu, Hong-Liang; Sun, Long; Ren, Qing-Hua; Zhang, Hao; Ji, Xin-Ming; Liu, Wen-Jun; Ding, Shi-Jin; Yang, Xiao-Feng; Zhang, David Wei

2016-01-01

Nowadays, the multi-crystalline silicon (mc-Si) solar cells dominate the photovoltaic industry. However, the current acid etching method on mc-Si surface used by firms can hardly suppress the average reflectance value below 25% in the visible light spectrum. Meanwhile, the nitric acid and the hydrofluoric contained in the etching solution is both environmental unfriendly and highly toxic to human. Here, a mc-Si solar cell based on ZnO nanostructures and an Al2O3 spacer layer is demonstrated. The eco-friendly fabrication is realized by low temperature atomic layer deposition of Al2O3 layer as well as ZnO seed layer. Moreover, the ZnO nanostructures are prepared by nontoxic and low cost hydro-thermal growth process. Results show that the best passivation quality of the n+ -type mc-Si surface can be achieved by balancing the Si dangling bond saturation level and the negative charge concentration in the Al2O3 film. Moreover, the average reflectance on cell surface can be suppressed to 8.2% in 400–900 nm range by controlling the thickness of ZnO seed layer. With these two combined refinements, a maximum solar cell efficiency of 15.8% is obtained eventually. This work offer a facile way to realize the environmental friendly fabrication of high performance mc-Si solar cells. PMID:27924911

From Family to Friends: Does Witnessing Interparental Violence Affect Young Adults’ Relationships with Friends?

Science.gov (United States)

Mandal, Mahua; Hindin, Michelle J.

2013-01-01

Purpose Childhood exposure to violence in one’s family of origin has been closely linked to subsequent perpetration and victimization of intimate partner violence. There is, however, little research on the relationship between witnessing violence and subsequent peer violence. This study investigates the effects of witnessing interparental violence among Filipino young adults on their use and experience of psychological aggression with friends. Methods The data source for this study was the Cebu Longitudinal Health and Nutrition Survey. Recent perpetration and victimization of friend psychological aggression among young adults ages 21–22 years was assessed through self-reports from the 2005 survey, and witnessing interparental violence during childhood was assessed through self-reports from the 2002 survey. Multinomial logistic regression was used to examine the effects of witnessing interparental violence on subsequent use and experience of friend psychological aggression. Analyses were stratified by gender. Results About 13% of females and 4% of males perpetrated psychological aggression towards close friends, and about 4% of females and males were victims. Fourteen percent of females and 3% of males experienced bidirectional psychological aggression. About 44% of females and 47% of males had, during childhood, witnessed their parents physically hurt one another. Witnessing maternal and reciprocal interparental violence during childhood significantly predicted bidirectional friend psychological aggression among males. Among females, witnessing interparental violence did not significantly predict involvement with friend psychological aggression. Conclusions Violence prevention programs should consider using family-centered interventions, and apply a gendered lens to their application. Further research on gender differences in friend aggression is recommended. PMID:23697789

Future batteries will be environment-friendly

International Nuclear Information System (INIS)

Larcher, D.; Tarascon, J.M.

2012-01-01

Since the beginning of the nineties, efficient batteries have been built thanks to lithium. The use of nano-materials for the electrodes have recently opened the way to a cheaper and more environmental friendly technologies like lithium-iron-phosphate (LiFePO 4 ) batteries instead of classical lithium-ion batteries. Nano-materials enable the batteries to use more efficiently the electrode and to store more energy. Sustainable development requires the elaboration of clean processes to produce nano-materials, it appears that micro-organisms might be able to produce nano-metric minerals through bio-mineralisation, it is particularly true for FePO 4 because iron and phosphates are abundant biological components. (A.C.)

Dermatology Depictions in Friends/ Descripciones dermatológicas en Friends

Directory of Open Access Journals (Sweden)

Skyler M White

2017-03-01

Full Text Available Health?related topics are frequently referenced on screen in movies and television. Friends was on?air for 10 seasonsand is one of the most watched television shows of all time. Dermatology was referenced more than any otherhealth?related topic throughout the series. Beliefs about attractiveness and the stigma of skin conditions are furtherpropagated in this program. Reviewing the depictions of dermatology in Friends will aid in understanding the public’sideas and stereotypes regarding skin and dermatologic diseases.

Modeling Age-Friendly Environment, Active Aging, and Social Connectedness in an Emerging Asian Economy

Directory of Open Access Journals (Sweden)

Ming-Ming Lai

2016-01-01

Full Text Available This paper empirically tested eight key features of WHO guidelines to age-friendly community by surveying 211 informal caregivers and 402 self-care adults (aged 45 to 85 and above in Malaysia. We examined the associations of these eight features with active aging and social connectedness through exploratory and confirmatory factor analyses. A structural model with satisfactory goodness-of-fit indices (CMIN/df = 1.11, RMSEA = 0.02, NFI = 0.97, TLI = 1.00, CFI = 1.00, and GFI = 0.96 indicates that transportation and housing, community support and health services, and outdoor spaces and buildings are statistically significant in creating an age-friendly environment. We found a statistically significant positive relationship between an age-friendly environment and active aging. This relationship is mediated by social connectedness. The results indicate that built environments such as accessible public transportations and housing, affordable and accessible healthcare services, and elderly friendly outdoor spaces and buildings have to be put into place before social environment in building an age-friendly environment. Otherwise, the structural barriers would hinder social interactions for the aged. The removal of the environmental barriers and improved public transportation services provide short-term solutions to meet the varied and growing needs of the older population.

Primary Schools Eco-Friendly Education in the Frame of Education for Sustainable Development

Science.gov (United States)

Prabawani, Bulan; Hanika, Ita Musfirowati; Pradhanawati, Ari; Budiatmo, Agung

2017-01-01

A research on primary school education in the frame of education for sustainable development, as known as ESD, is important because the awareness of eco-friendly activities and environment empowerment cannot be developed in a short time. Meanwhile, human activities have caused significant environmental degradation. This is an exploratory study…

How to Make Financial Aid "Freshman-Friendly"

Science.gov (United States)

Pugh, Susan L.; Johnson, David B.

2011-01-01

Ultimately, making financial aid "freshman friendly" also makes financial aid "sophomore friendly," "junior friendly," and "senior friendly." Indiana University has in place an Office of Enrollment Management (OEM) model that includes focused financial aid packaging strategies complemented by unique contact…

Anticancer activity of eco-friendly gold nanoparticles against lung and liver cancer cells

OpenAIRE

S. Rajeshkumar

2016-01-01

Gold nanoparticles have many applications in biomedical field. Improving delivery of anticancer agents to tumors using nanoparticles is one of the most promising research arenas in the field of nanotechnology. Eco-friendly gold nanoparticles synthesis was studied using marine bacteria Enterococcus sp. The nanoparticle synthesis started at 2 h of incubation time was identified by the formation of ruby red in the reaction mixture and SPR band centered at 545 nm. XRD shows that the strong four i...

Fermilab Friends for Science Education | Welcome

Science.gov (United States)

Fermilab Friends for Science Education FFSE Home About Us Join Us Support Us Contact Us Fermilab Friends for Science Education photo Fermilab Friends for Science Education supports innovative science education programs at Fermilab. Its mission is to: Enhance the quality of precollege science education in

Environmentally friendly, high-performance generation

International Nuclear Information System (INIS)

Kalmari, A.

2003-01-01

The project developer, owner, and operator of the new 45 MWth BFB-based cogeneration plant in Iisalmi is Termia Oy, part of the Atro Group (formerly Savon Voima Oy). Fired on peat and wood waste and handed over to the customer in November 2002, the plant's electrical output is sold to the parent company and heat locally to customers in Iisalmi. When the construction decision was made, one of the main objectives was to utilise as high a level of indigenous fuels (peat and biomass) as possible, at a high level of efficiency. An environmental impact analysis was carried out, taking into account the impact of various fuels and emissions in terms of combustion and logistics. One main benefit of the type of plant ultimately selected was that the bulk of the fuel can be supplied from the surrounding area. This is very important in terms of fuel supply security and local employment. The government provided a EUR 2.7 million grant for the project, equivalent to 13% of the total EUR 21 million investment budget. Before the plant was built, Termia used approximately 95 GWh of indigenous fuels annually. Today, this figure is 220 GWh. The main fuel used is milled peat. Up to 30% green chips from logging residues can be used. Recycled waste fuel can cover up to 3% of the total fuel requirement

Gender Norms and Institutional Culture: The Family-Friendly versus the Father-Friendly University

Science.gov (United States)

Sallee, Margaret W.

2013-01-01

This article investigates the role that gender norms and expectations about parenting play in establishing the family-friendly versus the father-friendly university. Using interviews with 51 male faculty at three research universities, the article considers how faculty and administrators' actions perpetuate cultures that promote or hinder…

A basic plan for the environment-friendly aspects of improved Korean standard nuclear power plant

International Nuclear Information System (INIS)

Jung, Hoon-Seok; Lee, Yong-Koo; Kim, Kwang-Ho

2006-01-01

The Improved Korean Standard Nuclear Power Plant (KSNP+) design has been made possible on the basis of engineering experiences and referring to an in-depth analysis of the design and construction of all the domestic nuclear power plants in operation. The KSNP+ is designed for improved safety, better economics, operability and maintainability by means of advanced technology expecting to demonstrate enhanced performance. The plant also has incorporated several environmentally friendly features through the restoration of excavated areas using an ecological approach, external coloring, figure of turbine generator building and landscaping around nuclear power plant. This is the first time that KOPEC has embarked on inducing environmentally friendly features into the basic plan. This is expected to mitigate the negative perceptions held by the residents in the vicinity of nuclear power plants and will contribute to a new and improved image of nuclear power plants. (authors)

Green hypocrisy? Environmental attitudes and residential space heating expenditure

Energy Technology Data Exchange (ETDEWEB)

Traynor, Laura; Lange, Ian; Moro, Mirko [Stirling Univ. (United Kingdom). Division of Economics

2012-06-15

In the UK, the largest proportion of household energy use is for space heating. Popular media make claims of a green hypocrisy: groups which have the strongest attitude towards the environment have the highest emissions. This study examines whether environmental attitudes and behaviours are associated with space heating energy use using data from the British Household Panel Survey. Results find that environmentally friendly attitudes generally do not lead to lower heating expenditures though environmentally friendly behaviours are associated with lower heating expenditure. Also, the effect of these attitudes and behaviours do not change as income increase.

Integrated nutrient management (INM) for sustaining crop productivity and reducing environmental impact: A review

International Nuclear Information System (INIS)

Wu, Wei; Ma, Baoluo

2015-01-01

The increasing food demands of a growing human population and the need for an environmentally friendly strategy for sustainable agricultural development require significant attention when addressing the issue of enhancing crop productivity. Here we discuss the role of integrated nutrient management (INM) in resolving these concerns, which has been proposed as a promising strategy for addressing such challenges. INM has multifaceted potential for the improvement of plant performance and resource efficiency while also enabling the protection of the environment and resource quality. This review examines the concepts, objectives, procedures and principles of INM. A comprehensive literature search revealed that INM enhances crop yields by 8–150% compared with conventional practices, increases water-use efficiency, and the economic returns to farmers, while improving grain quality and soil health and sustainability. Model simulation and fate assessment further reveal that reactive nitrogen (N) losses and GHG (greenhouse gas) emissions are reduced substantially under advanced INM practices. Lower inputs of chemical fertilizer and therefore lower human and environmental costs (such as intensity of land use, N use, reactive N losses and GHG emissions) were achieved under advanced INM practices without compromising crop yields. Various approaches and perspectives for further development of INM in the near future are also proposed and discussed. Strong and convincing evidence indicates that INM practice could be an innovative and environmentally friendly strategy for sustainable agriculture worldwide. - Highlights: • The increasing pressure to meet global cereal demand poses great challenge. • A changing environment further threatens cereal production. • Literature summary shows 8–150% yield advantage from use of INM method. • INM contributions to mitigation of environmental costs are remarkable. • High crop productivity and less environmental impact can be

Integrated nutrient management (INM) for sustaining crop productivity and reducing environmental impact: A review

Energy Technology Data Exchange (ETDEWEB)

Wu, Wei, E-mail: weiwu@nwsuaf.edu.cn [College of Agronomy, Northwest A& F University, Yangling, Shaanxi 712100 (China); Agriculture and Agri-Food Canada, Eastern Cereal and Oilseed Research Centre (ECORC), Ottawa, ON K1A 0C6 (Canada); Ma, Baoluo, E-mail: Baoluo.Ma@AGR.GC.CA [Agriculture and Agri-Food Canada, Eastern Cereal and Oilseed Research Centre (ECORC), Ottawa, ON K1A 0C6 (Canada)

2015-04-15

The increasing food demands of a growing human population and the need for an environmentally friendly strategy for sustainable agricultural development require significant attention when addressing the issue of enhancing crop productivity. Here we discuss the role of integrated nutrient management (INM) in resolving these concerns, which has been proposed as a promising strategy for addressing such challenges. INM has multifaceted potential for the improvement of plant performance and resource efficiency while also enabling the protection of the environment and resource quality. This review examines the concepts, objectives, procedures and principles of INM. A comprehensive literature search revealed that INM enhances crop yields by 8–150% compared with conventional practices, increases water-use efficiency, and the economic returns to farmers, while improving grain quality and soil health and sustainability. Model simulation and fate assessment further reveal that reactive nitrogen (N) losses and GHG (greenhouse gas) emissions are reduced substantially under advanced INM practices. Lower inputs of chemical fertilizer and therefore lower human and environmental costs (such as intensity of land use, N use, reactive N losses and GHG emissions) were achieved under advanced INM practices without compromising crop yields. Various approaches and perspectives for further development of INM in the near future are also proposed and discussed. Strong and convincing evidence indicates that INM practice could be an innovative and environmentally friendly strategy for sustainable agriculture worldwide. - Highlights: • The increasing pressure to meet global cereal demand poses great challenge. • A changing environment further threatens cereal production. • Literature summary shows 8–150% yield advantage from use of INM method. • INM contributions to mitigation of environmental costs are remarkable. • High crop productivity and less environmental impact can be

Conceptualizing age-friendly community characteristics in a sample of urban elders: an exploratory factor analysis.

Science.gov (United States)

Smith, Richard J; Lehning, Amanda J; Dunkle, Ruth E

2013-01-01

Accurate conceptualization and measurement of age-friendly community characteristics would help to reduce barriers to documenting the effects on elders of interventions to create such communities. This article contributes to the measurement of age-friendly communities through an exploratory factor analysis of items reflecting an existing US Environmental Protection Agency policy framework. From a sample of urban elders (n = 1,376), we identified 6 factors associated with demographic and health characteristics: access to business and leisure, social interaction, access to health care, neighborhood problems, social support, and community engagement. Future research should explore the effects of these factors across contexts and populations.

MOIRA Software Framework - Integrated User-friendly Shell for The Environmental Decision Support Systems

International Nuclear Information System (INIS)

Hofman, Dmitry; Nordlinder, Sture

2003-01-01

MOIRA DSS is a model-based computerised system for the identification of optimal remedial strategies to restore radionuclide contaminated fresh water environment The examples of the questions which decision-maker could address to the system are 'Is lake liming effective in reducing the radiocesium uptake by fish?', C an control of catchment run-off be an effective measure against further redistribution of radionuclides by river?', 'Is sediment removal worthwhile to reduce further contamination of the aquatic environment?'. The MOIRA system could help decision-maker to avoid implementation of inappropriate and expensive countermeasures. MOIRA gives the possibility to predict effeas of implementation of different types of the countermeasures and evaluate both 'ecological' and 'social' effect of the countermeasures. Decision support process using MOIRA DSS can be subdivided to the following steps: Definition of the site-specific environmental and socio-economic parameters using GIS-based data. Unknown site-specific data could be estimated using GIS-based models, default data for the socio-economic parameters, data directly provided by user. Providing data about fallout of the radionuclides. Definition of the time interval for which prognosis will be made. Definition of the alternative strategies of the countermeasures. Evaluation of the sequences of the implementation of the user-defined strategies and 'no actions' strategy using predictive models. Ranking strategies using Multi-Attribute Analysis Module (MAA) Preparation of the recommendations in the form of report. This process requires usage of several computerised tools such as predictive models, multi-attribute analysis software, geographical information system, data base. MOIRA software framework could be used as the basis for the creation of the wide range of the user-friendly and easy-to-learn decision support systems. It can also provide the advanced graphical user interface and data checking system for the

Biodegradable and bio-based polymers: future prospects of eco-friendly plastics.

Science.gov (United States)

Iwata, Tadahisa

2015-03-09

Currently used plastics are mostly produced from petrochemical products, but there is a growing demand for eco-friendly plastics. The use of bio-based plastics, which are produced from renewable resources, and biodegradable plastics, which are degraded in the environment, will lead to a more sustainable society and help us solve global environmental and waste management problems. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Advanced Environment Friendly Nanotechnologies

Science.gov (United States)

Figovsky, O.; Beilin, D.; Blank, N.

The economic, security, military and environmental implications of molecular manufacturing are extreme. Unfortunately, conflicting definitions of nanotechnology and blurry distinctions between significantly different fields have complicated the effort to understand those differences and to develop sensible, effective policy for each. The risks of today's nanoscale technologies cannot be treated the same as the risks of longer-term molecular manufacturing. It is a mistake to put them together in one basket for policy consideration — each is important to address, but they offer different problems and will require far different solutions. As used today, the term nanotechnology usually refers to a broad collection of mostly disconnected fields. Essentially, anything sufficiently small and interesting can be called nanotechnology. Much of it is harmless. For the rest, much of the harm is of familiar and limited quality. Molecular manufacturing, by contrast, will bring unfamiliar risks and new classes of problems. The advanced environment friendly nanotechnologies elaborated by Israel Company Polymate Ltd. — International Research Center are illustrated.

Structure Study of Cellulose Fibers Wet-Spun from Environmentally Friendly NaOH/Urea Aqueous Solutions

Energy Technology Data Exchange (ETDEWEB)

Chen,X.; Burger, C.; Wan, F.; Zhang, J.; Rong, L.; Hsiao, B.; Chu, B.; Cai, J.; Zhang, L.

2007-01-01

In this study, structure changes of regenerated cellulose fibers wet-spun from a cotton linter pulp (degree of polymerization {approx}620) solution in an NaOH/urea solvent under different conditions were investigated by simultaneous synchrotron wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS). WAXD results indicated that the increase in flow rate during spinning produced a better crystal orientation and a higher degree of crystallinity, whereas a 2-fold increase in draw ratio only affected the crystal orientation. When coagulated in a H{sub 2}SO{sub 4}/Na{sub 2}SO{sub 4} aqueous solution at 15 {sup o}C, the regenerated fibers exhibited the highest crystallinity and a crystal orientation comparable to that of commercial rayon fibers by the viscose method. SAXS patterns exhibited a pair of meridional maxima in all regenerated cellulose fibers, indicating the existence of a lamellar structure. A fibrillar superstructure was observed only at higher flow rates (>20 m/min). The conformation of cellulose molecules in NaOH/urea aqueous solution was also investigated by static and dynamic light scattering. It was found that cellulose chains formed aggregates with a radius of gyration, R{sub g}, of about 232 nm and an apparent hydrodynamic radius, R{sub h}, of about 172 nm. The NaOH/urea solvent system is low-cost and environmentally friendly, which may offer an alternative route to replace more hazardous existing methods for the production of regenerated cellulose fibers.

Friends of the Earth case against the PWR

International Nuclear Information System (INIS)

Boyle, S.

1987-01-01

Friends of the Earth's case against Sizewell B has been summarised in a report entitled 'Critical Decision: Should Britain buy the Pressurised Water Reactor?'. This showed that on economic and safety grounds, Sizewell B would not be a good choice for the electricity consumer or the country at large. Events since the end of the Inquiry, particularly those affecting the economic case, have confirmed this conclusion. This paper will summarise the case, both during the Inquiry and subsequent to this, as well as make reference to the long-term environmental implications of the Central Electricity Generating Board's PWR programme. (author)

Best friends' interactions and substance use: The role of friend pressure and unsupervised co-deviancy.

Science.gov (United States)

Tsakpinoglou, Florence; Poulin, François

2017-10-01

Best friends exert a substantial influence on rising alcohol and marijuana use during adolescence. Two mechanisms occurring within friendship - friend pressure and unsupervised co-deviancy - may partially capture the way friends influence one another. The current study aims to: (1) examine the psychometric properties of a new instrument designed to assess pressure from a youth's best friend and unsupervised co-deviancy; (2) investigate the relative contribution of these processes to alcohol and marijuana use; and (3) determine whether gender moderates these associations. Data were collected through self-report questionnaires completed by 294 Canadian youths (62% female) across two time points (ages 15-16). Principal component analysis yielded a two-factor solution corresponding to friend pressure and unsupervised co-deviancy. Logistic regressions subsequently showed that unsupervised co-deviancy was predictive of an increase in marijuana use one year later. Neither process predicted an increase in alcohol use. Results did not differ as a function of gender. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Environmental risk concern and preferences for energy-saving measures

NARCIS (Netherlands)

Poortinga, W; Steg, L.; Vlek, C.A.J.

It is often assumed that higher environmental concern goes with more positive attitudes toward environmental management strategies and more environmentally friendly behavior. Cultural theory argues this relationship is more complex. Cultural theory distinguishes four ways of life, involving distinct

Genetic and environmental sources of individual religiousness: the roles of individual personality traits and perceived environmental religiousness.

Science.gov (United States)

Kandler, Christian; Riemann, Rainer

2013-07-01

In the current study, we examined the genetic and environmental sources of the links between individual religiousness and individual personality traits, perceived parental religiousness, and perceived peer religiousness. Data from 870 individuals (incl. 394 twin pairs) were analyzed. Variance in individual religiousness was significantly influenced by genetic effects, environmental influences shared by twins reared together, and individual-specific environmental influences. Individual religiousness showed significant associations with age, sex, specific personality traits (e.g., agreeableness, openness to values), and perceived religiousness of important social interaction partners, such as parents, best friends, and spouses. The links to personality traits were relatively small and primarily genetically mediated. The associations between individual religiousness and parental religiousness were substantial and mediated by shared environmental effects. These links significantly decreased across age accompanying a significant decrease of shared environmental influences on individual religiousness. The correlations between individual religiousness and perceived religiousness of spouses and best friends were relatively moderate but increased with age. These associations were mediated by genetic as well as nonshared environmental sources accompanying an increase of nonshared environmental influences on individual religiousness with age. The results suggest that inter-individual differences in religiousness are due to multiple sources.

Environmental accounting of eco-innovations through environmental input-output analysis : The case of hydrogen and fuel cells buses

NARCIS (Netherlands)

Cantono, Simona; Heijungs, Reinout; Kleijn, Réne

The introduction of environmentally friendly innovations in both transport and energy sectors are included in the list of priorities of the European Union political agenda. This paper investigates the environmental consequences of the introduction of hydrogen and fuel cells technology in the

Waste minimization through process optimization/integration and resource management at eco-friendly Heavy Water Plants

International Nuclear Information System (INIS)

Nageshri, Jagdish; Gupta, S.K.

2004-01-01

Heavy Water Board has celebrated 2003 as Environmental Conservation Year captivating a range of enviro-friendly measures. This article attempts to give a brief overview of the outcome of systems and adapted procedures for waste minimization through process integration and resource management at Heavy Water Plants

OS Friendly Microprocessor Architecture

Science.gov (United States)

2017-04-01

NOTES Patrick La Fratta is now affiliated with Micron Technology, Inc., Boise, Idaho. 14. ABSTRACT We present an introduction to the patented ...Operating System Friendly Microprocessor Architecture (OSFA). The software framework to support the hardware-level security features is currently patent ...Army is assignee. OS Friendly Microprocessor Architecture. United States Patent 9122610. 2015 Sep. 2. Jungwirth P, inventor; US Army is assignee

FY 1999 report on the potential survey of the environmentally friendly type coal utilization system. Potential survey of the environmentally friendly type coal utilization system in the Philippines; 1999 nendo chosa hokokusho. Kankyo chowa gata sekitan riyo system kanosei chosa (Firipin ni okeru kankyo chowa gata system kanosei chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of contributing to working out a master plan for the introduction of the environmentally friendly type coal utilization system in the Philippines, analysis was made of the state of coal use/the state of spread by industry mostly including the electric power industry, cement industry and residential/commercial use fuel sector. In the Philippines, the amount of coal use has rapidly been increasing since coal-fired power plants started operation. For the promotion of the use of domestic coals, it is important to reform low grade coal. Moreover, the technology is required which copes with the reinforced regulation against SOx emissions. In the cement industry, coal and coal ash have not yet been effectively used. Therefore, the following measures should be taken to increase the competitive force: energy conservation measures, reinforcement of environmental measures such as dust prevention, and effective use of the fly ash emitted from power plants. In general households and small-/medium-sized industries such as tobacco drying, they still use a large amount of charcoals and firewood, which is approximately 86% of the residential/commercial use energy. There is a growing tendency for the development/spread of coal briquette as substituting energy. (NEDO)

Environmentally Friendly Utilization of Wheat Straw Ash in Cement-Based Composites

Directory of Open Access Journals (Sweden)

Shazim Ali Memon

2018-04-01

600 °C and ground for 120 min was found to be the most effective way to use pozzolanic material in cement-based composites. The addition of WSA in cement-based composites would achieve manifold objectives, i.e., aiding in the production of environmentally friendly concrete, the use of wheat straw as fuel for electricity production, and adding economic value to wheat straw.

Radical Homemaking in Contemporary American Environmental Fiction

Directory of Open Access Journals (Sweden)

Kristin J. Jacobson

2018-02-01

Full Text Available Ursula K. Heise in ‘Ecocriticism and the Transnational Turn in American Studies’ critiques ‘the portrayal of multicultural and sometimes transnational nuclear families as the narrative solution to environmental and political problems’ (Heise, 2008: 383. This essay places Heise’s critique of the ‘ecological family romance’ in conversation with three other ecological domestic fictions: T. C. Boyle’s 'A Friend of the Earth' (2000, Jonathan Franzen’s 'Freedom' (2010, and Barbara Kingsolver’s 'Flight Behavior' (2012. Heise’s critique and Shannon Hayes’ 'Radical Homemakers' (2010 frame my close readings of the novels’ interconnected themes of radical homemaking, transnationalism, and environmentalism. My reading of the novels highlights their shared use of marginalized, racially-other characters to develop their entwined romantic and environmental plots (Lalitha in 'Freedom', several minor characters in 'A Friend of the Earth', and Ovid in 'Flight Behavior' and their use of sentimental deaths, especially of key female characters (Lalitha in Freedom, Sierra in A Friend of the Earth, and Dellarobia’s uncertain fate in Flight Behavior. By adopting the sentimental, domestic romance plot for ecological aims, the three novels highlight how environmental aims get stymied when cultural and ecological diversity are relegated to the margins. They also suggest that more is gained than lost through their use of ecological allegory. While the fictions do not offer solutions, they do push their readers to confront the Anthropocene’s ecological realities and their radical domestic-environmental politics.

Natural gas: an environmental-friendly solution?

International Nuclear Information System (INIS)

Vermeire, J.

1994-01-01

Since 1970, the portion of natural gas in energy consumption in Western-Europe has grown by 6 percent per year on the average. About 20 percent of the energy demand in Western-Europe is now covered by natural gas. It is forecasted that this growth will continue at a rate of 2 percent per year until 2010. The natural gas consumption will increase from 325 billion cubic metres in 1993 to 450 billion cubic metres per year in 2010. For the coming 10 to 15 years, the natural gas demand is covered by long-term contracts with gas producing countries. From 2010 on, additional contracts, covering 70 to 120 billion cubic metres per year are required. A shift in geographic distribution of countries from which natural gas will be imported by Western-European countries is expected, which implies high investments and additional costs for transport and distribution of natural gas. Due to its qualities with respect to environmental impact, yield, availability, and advanced technology, natural gas is the energy vector of the 21 first century. (A.S.)

User friendly packaging

DEFF Research Database (Denmark)

Geert Jensen, Birgitte

2010-01-01

Most consumers have experienced occasional problems with opening packaging. Tomato sauce from the tinned mackerel splattered all over the kitchen counter, the unrelenting pickle jar lid, and the package of sliced ham that cannot be opened without a knife or a pair of scissors. The research project...... “User-friendly Packaging” aims to create a platform for developing more user-friendly packaging. One intended outcome of the project is a guideline that industry can use in development efforts. The project also points the way for more extended collaboration between companies and design researchers. How...... can design research help industry in packaging innovation?...

Earning capacity of environmentally friendly companies and social responsible investing

International Nuclear Information System (INIS)

Bjerk, Jan

2002-01-01

Firms on Dow Jones Sustainability Index yield over time the same return as the ''ordinary'' firms on the Dow Jones World Stock Index. There are several investment funds today that deal in shares with selected companies having a high environmental or ethical profile. This is Social Responsible Investing (SRI). When the Norwegian company Storebrand Kapitalforvaltning selects companies for SRI, they exclude immediately nuclear power stations, tobacco factories and manufacturers of land mines. In addition to the same return on invested capital, both investors and society get an environmental profit. The firms analysed and selected by Storebrand for SRI contributes significantly less negative environmental effects than the other firms, typically 33% less to the global heating and have on average 53% less toxic emissions and 45% less water consumption

75 FR 63851 - Draft Friends Organizations Policy

Science.gov (United States)

2010-10-18

...] Draft Friends Organizations Policy AGENCY: Fish and Wildlife Service, Department of the Interior. ACTION... Service's mission through partnerships with Friends organizations (volunteer/advocate). Today, Friends organizations play a vital role in helping to fulfill the Service's mission of ``working with others, to...

Super Global Projects and Environmentally Friendly Technologies Used in Space Exploration: Realities and Prospects of the Space Age

Directory of Open Access Journals (Sweden)

Sergey Krichevsky

2018-02-01

Full Text Available The 60th anniversary of the Space Age is an important intermediate finishing point on the way of a man and the whole humanity to space. Along with the outstanding achievements, there are a number of challenges and contradictions in space exploration due to the aggravation of the global crisis on Earth, low efficiency and the backlog of space research in the transition to a new technology based reality and clean technologies. Both the international astronautics and the space exploration area nowadays face difficulties in choosing a new paradigm and a development strategy that is becoming even more complicated due to the current unstable and turbulent situation on Earth. The article reveals the optimistic scenario of further space exploration, as well as the methodological and practical aspects of new projects and technologies. The periodization of the Space Age history has been conducted. It has been also proposed a new classification of the “space” phenomenon due to concretizing the concept of “global” in the form of a three-scale structure encompassing the following levels: 1 planetary global; 2 super global; 3 universally global. The notion of “super global space exploration project” has been introduced. The concept of further space exploration is proposed, which includes four interrelated super global projects:1 Earth Protection System from Asteroid and Comet Threat; 2 Moon Exploration; 3 Mars Exploration; 4 Cosmic Humanity. Since the humanity is embarking on the practical implementation of these super global projects, it is urgent to make a transition towards a new technology based order, as well as up-to-date technologies. A couple of ecological projects and space exploration technologies of the 20th and 21st centuries have been exemplified and analyzed. It has been also worked out the list of new environmentally friendly space technologies and projects. The research makes an emphasis upon a great potential of clean and green

Sustainable Regeneration of Nanoparticle Enhanced Activated Carbon in Water

Science.gov (United States)

The regeneration and reuse of exhausted granular activated carbon (GAC) is an appropriate method for lowering operational and environmental costs. Advanced oxidation is a promising environmental friendly technique for GAC regeneration. The main objective of this research was to ...

Mobile with renewable energy. Marketable solutions for climate-friendly electromobility; Erneuerbar mobil. Marktfaehige Loesungen fuer eine klimafreundliche Elektromobilitaet

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-03-15

This publication presents the goals envisioned by the German Federal Environmental Ministry for electromobility, which are outlined by the four keywords clean, gentle, economic, and practical. It then reports on focal areas of state funding and on projects: field trials on electromobility in private automotive traffic; field trials on electromobility in commercial automotive traffic; hybrid busses for environmentally friendly public transport; accompanying scientific research; and battery recycling.

Using mine waste mud to produce environmentally friendly new binders

OpenAIRE

Torgal, Fernando Pacheco; Gomes, J. P. Castro; Jalali, Said

2007-01-01

It is now accepted that new binders, such as alkali-activated binders, are needed to replace portland cement for enhanced environmental and durability performance. Alkali-activated binders have emerged as an alternative to (ordinary portland cement ) OPC binders, which seem to have superior durability and environmental impact.This paper reports results of a research project on the development of an alkali-activated binders using mineral waste mud from the Panasqueira tungsten mine in Portugal...

Enhancement of stability of various nZVI suspensions used in groundwater remediation with environmentally friendly organic stabilizers

Science.gov (United States)

Schmid, Doris; Wagner, Stephan; Velimirović, Milica; Laumann, Susanne; Micić, Vesna; Hofmann, Thilo

2014-05-01

The use of nanoscale zero-valent iron (nZVI) particles for in situ remediation of polluted soil and groundwater has been shown as one of the most promising techniques [1]. The success of this technology depends on the mobility, reactivity, and longevity of nZVI particles. The mobility of nZVI particles depends on the properties of the single particles, stability of the particle suspension, and the aquifer material [1,2]. In order to enhance the mobility of nZVI, the mobility-decisive properties of the nZVI particles in suspension such as concentration, size distribution, surface charge, and sedimentation rate have to be investigated and optimized. Previous studies showed that pristine nZVI particles aggregate rapidly in water, reducing the particles radius of influence after injection [3]. In order to prevent aggregation and sedimentation of the nZVI particles, and consequently improve the stability of nZVI suspension and therefore the mobility of the nZVI particles, surface stabilizers can be used to provide electrostatic repulsion and steric or electrosteric stabilization [3,4]. The objective of this lab-scale study is to investigate the potential for enhancing the stability of different nZVI suspensions by means of environmentally friendly organic stabilizers, including carboxymethyl cellulose, pectin, alginate, xanthan, and guar gum. The different nZVI particles used included pristine and polyacrylic acid-coated nZVI particles provided in suspension (Nanofer 25 and Nanofer 25S, respectively, NANOIRON s.r.o., Czech Republic), air-stable nZVI particles (Nanofer Star, (NANOIRON s.r.o., Czech Republic), and milled iron flakes (UVR-FIA, Germany). In order to study the enhancement of nZVI stability (1 g L-1 total iron) different concentrations of organic stabilizers (1-20 wt.%) were applied in these nZVI suspensions. Each nZVI suspension was freshly prepared and treated for 10 minutes with Ultra-Turrax (15 000 rpm) and 10 minutes ultrasonic bath prior to

[Fostering LGBT-friendly healthcare services].

Science.gov (United States)

Wei, Han-Ting; Chen, Mu-Hong; Ku, Wen-Wei

2015-02-01

LGBT (lesbian, gay, bisexual, transgender) patients suffer from stigma and discrimination when seeking healthcare. A large LGBT healthcare survey revealed that 56% of gay patients and 70% of transgender patients suffered some type of discrimination while seeking healthcare in 2014. The fostering of LGBT-friendly healthcare services is not just an advanced step of gender mainstreaming but also a fulfillment of health equality and equity. Additionally, LGBT-friendly healthcare services are expected to provide new opportunities for healthcare workers. Therefore, proactive government policies, education, research, and clinical practice should all encourage the development of these healthcare services. We look forward to a well-developed LGBT-friendly healthcare system in Taiwan.

Development of Environment-Friendly Insecticides Based on Enantioselectivity: Bifenthrin as a Case.

Science.gov (United States)

Qian, Yi; Zhou, Peixue; Zhang, Quan

2017-01-01

Chiral insecticides significantly contribute to the environmental pollutions recently. As the development of industry and agriculture, increasing number of chiral insecticides are to be introduced into the market. However, their enantioselective toxicology to ecosystem still remains uncertain. In this review, we embarked on a structured search of bibliographic databases for peer-reviewed articles regarding the enantioselective effects of bifenthrin, a typical chiral insecticide, on both target and non-target species. With this enantioselective property of chiral insecticides, they often exhibit adverse effects on non-target species enantioselectively. Specifically, the enantioselective effects of bifenthrin on target and non-target organisms were discussed. In target species, R-bifenthrin exerts more significant activities in deinsectization, compared with S-bifenthrin. On the other hand, Sbifenthrin is more toxic to non-target species than R-bifenthrin, which suggests that the application of sole enantiomer is more efficient and environment-friendly than that of racemate. This review confirms the choice of environment-friendly insecticides from the perspective of the enantioselectivity of chiral insecticides. To make insecticides more efficient to target species and less toxic to non-target species, further research should be done to investigated the potential effects of targetactive enantiomers on non-target organisms as well as the enantioselective fate of enantiomers in multiple environmental matrix.

Selective leaching of Zn from spent alkaline batteries using environmentally friendly approaches.

Science.gov (United States)

Maryam Sadeghi, S; Vanpeteghem, Guillaumme; Neto, Isabel F F; Soares, Helena M V M

2017-02-01

The main aim of this work was to evaluate the possibility of using microwave or ultrasound to assist the efficient and selective leaching of Zn from spent alkaline batteries and compare the results with those obtained using the conventional method. Two different strategies were applied: acid leaching of a washed residue and alkaline leaching of the original residue. In both (acid and alkaline) approaches, the use of microwave- or ultrasound-assisted leaching increased the extraction of Zn compared with the best results obtained using conventional leaching [acid leaching (1.5mol/L H 2 SO 4 , 3h, 80°C), 90% of Zn extracted; alkaline leaching (6mol/L NaOH, 3h, 80°C), 42% of Zn extracted]. With acid leaching, 94% of the Zn was extracted using microwave-assisted leaching (1 cycle, 30s, 1mol/L H 2 SO 4 ), and 92% of the Zn was extracted using ultrasound-assisted leaching (2min, 0.1p, 20% amplitude, 1mol/L H 2 SO 4 ). Ultrasound-assisted leaching resulted in a more selective (Zn/Mn ratio of 5.1) Zn extraction than microwave-assisted leaching (Zn/Mn ratio of 3.5); both processes generated a concentrated Zn solution (⩾18.7g/L) with a purity (83.3% and 77.7%, respectively) that was suitable for electrowinning. With alkaline leaching, microwave- (1 cycle, 3 min, 4mol/L NaOH) and ultrasound-assisted (14min, 0.1p, 20% amplitude, 4mol/L NaOH) leaching extracted about 80% of the Zn and less than 0.01% of the Mn, which resulted in lesser concentrated Zn solutions (approximately 16.5g/L) but with high purity (>99.5%) that was suitable for the recovery of Zn by precipitation. The microwave- and ultrasound-assisted leaching strategies used in this work proved to be efficient and environmentally-friendly approaches for the extraction of Zn from spent alkaline residues since a concentrated Zn solution with adequate purity for subsequent Zn recovery was obtained using significantly decreased leaching times and concentrations of chemicals. Copyright © 2017 Elsevier Ltd. All rights

Show me your friends and I will tell you what type of person you are: how own profile, number of friends, and type of friends influence impression formation on social network sites

NARCIS (Netherlands)

Utz, S.

2010-01-01

This experiment examines how far extraversion of the target (self-generated information), extraversion of the target's friends (friends-generated information), and number of friends (system-generated information) influence the perceived popularity, communal orientation, and social attractiveness of

Ag-based semiconductor photocatalysts in environmental purification

Energy Technology Data Exchange (ETDEWEB)

Li, Jiade; Fang, Wen [School of Metallurgy and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, Jiangxi Province (China); Yu, Changlin, E-mail: yuchanglinjx@163.com [School of Metallurgy and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, Jiangxi Province (China); School of Environment Engineering and biology Engineering, Guangdong University of Petrochemical Technology, Maoming, 525000 Guangdong Province (China); Zhou, Wanqin [School of Metallurgy and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, Jiangxi Province (China); State Key Laboratory of Photocatalysis on Energy and Environment, Fuzhou University, Fuzhou, 350002 (China); Zhu, Lihua [School of Metallurgy and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, Jiangxi Province (China); Xie, Yu, E-mail: xieyu_121@163.com [College of Environment and Chemical Engineering, Nanchang Hangkong University, Nanchang 330063, Jiangxi (China)

2015-12-15

Graphical abstract: Ag-based semiconductors as promising visible light-driven photocatalysts have aroused much interesting due to their strong visible light responsibility. Formation of heterojunction could largely promote the electron/hole pair separation, resulting in highly photocatalytic activity and stability. - Highlights: • Recent research progress in the fabrication and application of Ag-based semiconductor photocatalyts. • The advantages and disadvantages of Ag-based semiconductor as photocatalysts. • Strategies in design Ag-based semiconductor photocatalysts with high performance. - Abstract: Over the past decades, with the fast development of global industrial development, various organic pollutants discharged in water have become a major source of environmental pollution in waste fields. Photocatalysis, as green and environmentally friendly technology, has attracted much attention in pollutants degradation due to its efficient degradation rate. However, the practical application of traditional semiconductor photocatalysts, e.g. TiO{sub 2}, ZnO, is limited by their weak visible light adsorption due to their wide band gaps. Nowadays, the study in photocatalysts focuses on new and narrow band gap semiconductors. Among them, Ag-based semiconductors as promising visible light-driven photocatalysts have aroused much interesting due to their strong visible light responsibility. Most of Ag-based semiconductors could exhibit high initial photocatalytic activity. But they easy suffer from poor stability because of photochemical corrosion. Design heterojunction, increasing specific surface area, enriching pore structure, regulating morphology, controlling crystal facets, and producing plasmonic effects were considered as the effective strategies to improve the photocatalytic performance of Ag-based photocatalyts. Moreover, combining the superior properties of carbon materials (e.g. carbon quantum dots, carbon nano-tube, carbon nanofibers, graphene) with Ag

Ag-based semiconductor photocatalysts in environmental purification

International Nuclear Information System (INIS)

Li, Jiade; Fang, Wen; Yu, Changlin; Zhou, Wanqin; Zhu, Lihua; Xie, Yu

2015-01-01

Graphical abstract: Ag-based semiconductors as promising visible light-driven photocatalysts have aroused much interesting due to their strong visible light responsibility. Formation of heterojunction could largely promote the electron/hole pair separation, resulting in highly photocatalytic activity and stability. - Highlights: • Recent research progress in the fabrication and application of Ag-based semiconductor photocatalyts. • The advantages and disadvantages of Ag-based semiconductor as photocatalysts. • Strategies in design Ag-based semiconductor photocatalysts with high performance. - Abstract: Over the past decades, with the fast development of global industrial development, various organic pollutants discharged in water have become a major source of environmental pollution in waste fields. Photocatalysis, as green and environmentally friendly technology, has attracted much attention in pollutants degradation due to its efficient degradation rate. However, the practical application of traditional semiconductor photocatalysts, e.g. TiO 2 , ZnO, is limited by their weak visible light adsorption due to their wide band gaps. Nowadays, the study in photocatalysts focuses on new and narrow band gap semiconductors. Among them, Ag-based semiconductors as promising visible light-driven photocatalysts have aroused much interesting due to their strong visible light responsibility. Most of Ag-based semiconductors could exhibit high initial photocatalytic activity. But they easy suffer from poor stability because of photochemical corrosion. Design heterojunction, increasing specific surface area, enriching pore structure, regulating morphology, controlling crystal facets, and producing plasmonic effects were considered as the effective strategies to improve the photocatalytic performance of Ag-based photocatalyts. Moreover, combining the superior properties of carbon materials (e.g. carbon quantum dots, carbon nano-tube, carbon nanofibers, graphene) with Ag

Evaluation of eco-friendly zwitterionic detergents for enveloped virus inactivation.

Science.gov (United States)

Conley, Lynn; Tao, Yinying; Henry, Alexis; Koepf, Edward; Cecchini, Douglas; Pieracci, John; Ghose, Sanchayita

2017-04-01

Inclusion of a detergent in protein biotherapeutic purification processes is a simple and very robust method for inactivating enveloped viruses. The detergent Triton X-100 has been used for many years and is part of the production process of several commercial therapeutic proteins. However, recent ecological studies have suggested that Triton X-100 and its break-down products can potentially behave as endocrine disrupters in aquatic organisms, raising concerns from an environmental impact perspective. As such, discharge of Triton X-100 into the waste water treatment plants is regulated in some jurisdictions, and alternative detergents for viral inactivation are required. In this work, we report on the identification and evaluation of more eco-friendly detergents as viable replacements for Triton X-100. Five detergent candidates with low to moderate environmental impact were initially identified and evaluated with respect to protein stability, followed by proof-of-concept virus inactivation studies using a model enveloped virus. From the set of candidates lauryldimethylamine N-oxide (LDAO) was identified as the most promising detergent due to its low ecotoxicity, robust anti-viral activity (LRV >4 at validation set-point conditions with X-MuLX), and absence of any negative impact on protein function. This detergent exhibited effective and robust virus inactivation in a broad range of protein concentrations, solution conductivities, pHs, and in several different cell culture fluid matrices. The only process parameter which correlated with reduced virus inactivation potency was LDAO concentration, and then only when the concentration was reduced to below the detergent's critical micelle concentration (CMC). Additionally, this work also demonstrated that LDAO was cleared to below detectable levels after Protein A affinity chromatography, making it suitable for use in a platform process that utilizes this chromatographic mode for protein capture. All these findings

Hispanic Labor Friends Initiative: supporting vulnerable women.

Science.gov (United States)

Hazard, Cambria Jones; Callister, Lynn Clark; Birkhead, Ana; Nichols, Lisa

2009-01-01

To evaluate the qualitative aspects of the Hispanic Labor Friends Initiative. "Hispanic Labor Friends," bilingual Hispanic community women who were themselves mothers, were recruited by clinic and hospital personnel. Women who agreed were educated, received translation certification, and were oriented to the initiative. Pregnant Hispanic immigrant women seen in the health center who met criteria set by the multidisciplinary health care team were assigned a Hispanic Labor Friend by 32 weeks' gestation. Hispanic Labor Friends assisted women with communication with healthcare providers and provided social support. Qualitative evaluation of the program consisted of interviews with several groups: (1) Hispanic immigrant women who had a Hispanic Labor Friend, (2) Hispanic immigrant women who were not in the Hispanic Labor Friends program, (3) Hispanic Labor Friends, (4) healthcare providers for Hispanic women. Data saturation was reached, and data were analyzed by the research team using descriptive qualitative inquiry. The Hispanic immigrant women described positive outcomes from being involved in the Hispanic Labor Friends program, including feeling supported and comforted. "I felt as though my family were at my side." One woman who had standard care said, "It is hard for me to communicate. When I gave birth, the nurses asked me things, and I didn't understand anything. I stayed quiet." One of the nurses who was interviewed said: "I think they [the HLF patients] get better care. Sometimes we think we can communicate with them with their little bit of English and our little bit of Spanish. But you get an HLF and it's a totally different story. We can more adequately tell what's going on with them...They end up getting better care." One Hispanic Labor Friend said, "The women are very appreciative that I was there to help them through a critical time." Women who participated in the study identified the need to have a continuing association with Hispanic Labor Friends in

Critical friends and collaborative partnership

Directory of Open Access Journals (Sweden)

Katarina Jandér

2013-12-01

Full Text Available Critical friends: a method for peer feedback The Critical Friend-method has been used in various educational settings to facilitate the process of continuous improvement in teaching. The aim of this study was to implement Critical Friends, and to find out if this method could be used for feedback on teaching as part of a librarians' professional development. The project was carried out within the Library Unit of the Faculty of Medicine at Lund University, Sweden, in collaboration with the faculty's Centre for Teaching and Learning. Seven librarians and an educational consultant from the Centre for Teaching and Learning participated; the educational consultant played an essential role in supervising and structuring the project and the evaluation process, preparing readings as well as being an active participant. The participants worked in pairs; the performance of one teacher and the associated classroom activities were observed by the critical friend, and then evaluated and discussed. Evaluation and results After two preparatory group meetings, a final meeting was held where all pairs reported what they had done and how they perceived the critical friend process. The experiences of the participating librarians were explored using a questionnaire. The questionnaire was analyzed using content analysis by one librarian and the educational consultant independently. The results suggested that use of the critical friend method could have a positive impact by achieving the following: strengthening shared values concerning teaching issues; promoting self-reflection on teaching; facilitating communication with colleagues; and reducing the sense of 'loneliness‘ in teaching. The difficulties in the implementation were lack of time and competing duties. It was perceived as an advantage to work in close partnership with the faculty's educational consultants, who were familiar with the organization.

Properties of potential eco-friendly gas replacements for particle detectors in high-energy physics

Science.gov (United States)

Saviano, G.; Ferrini, M.; Benussi, L.; Bianco, S.; Piccolo, D.; Colafranceschi, S.; KjØlbro, J.; Sharma, A.; Yang, D.; Chen, G.; Ban, Y.; Li, Q.; Grassini, S.; Parvis, M.

2018-03-01

Gas detectors for elementary particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This work studies properties of potential eco-friendly gas replacements by computing the physical and chemical parameters relevant for use as detector media, and suggests candidates to be considered for experimental investigation.

Friend Effects and Racial Disparities in Academic Achievement

Directory of Open Access Journals (Sweden)

Jennifer Flashman

2014-07-01

Full Text Available Racial disparities in achievement are a persistent fact of the US educational system. An often cited but rarely directly studied explanation for these disparities is that adolescents from different racial and ethnic backgrounds are exposed to different peers and have different friends. In this article I identify the impact of friends on racial and ethnic achievement disparities. Using data from Add Health and an instrumental variable approach, I show that the achievement characteristics of youths’ friends drive friend effects; adolescents with friends with higher grades are more likely to increase their grades compared to those with lower-achieving friends. Although these effects do not differ across race/ethnicity, given differences in friendship patterns, if black and Latino adolescents had friends with the achievement characteristics of white students, the GPA gap would be 17 to 19 percent smaller. Although modest, this effect represents an important and often overlooked source of difference among black and Latino youth.

To friend or not to friend? Social networking and faculty perceptions of online professionalism.

Science.gov (United States)

Chretien, Katherine C; Farnan, Jeanne M; Greysen, S Ryan; Kind, Terry

2011-12-01

To assess faculty perceptions of professional boundaries and trainee-posted content on social networking sites (SNS). In June 2010, the Clerkship Directors in Internal Medicine conducted its annual survey of U.S. and Canadian member institutions. The survey included sections on demographics and social networking. The authors used descriptive statistics and tests of association to analyze the Likert scale responses and qualitatively analyzed the free-text responses. Of 110 institutional members, 82 (75%) responded to the survey. Of the 40 respondents who reported current or past SNS use, 21 (53%) reported receiving a "friend request" from a current student and 25 (63%) from a current resident. Of these, 4 (19%) accepted the student request and 12 (48%) accepted the resident request. Sixty-three of 80 (79%) felt it was inappropriate to send a friend request to a current student, 61 (76%) to accept a current student's request, 42 (53%) to become friends with a current resident, and 61 (81%) to become friends with a current patient. Becoming friends with a former student, former resident, or colleague was perceived as more appropriate. Younger respondents were less likely to deem specific student behaviors inappropriate (odds ratio [OR] 0.18-0.79; adjusted OR 0.12-0.86, controlling for respondents' sex, rank, and SNS use), although none reached statistical significance. Some internal medicine educators are using SNSs and interacting with trainees online. Their perceptions on the appropriateness of social networking behaviors provide some consensus for professional boundaries between faculty and trainees in the digital world.

Baby-Friendly Practices Minimize Newborn Infants Weight Loss.

Science.gov (United States)

Procaccini, Diane; Curley, Ann L Cupp; Goldman, Martha

2018-04-01

It is accepted that newborns lose weight in the first few days of life. Baby-Friendly practices that support breastfeeding may affect newborn weight loss. The objective of this study were: 1) To determine whether Baby-Friendly practices are associated with term newborn weight loss day 0-2 in three feeding categories (exclusively breastfed, mixed formula fed and breastfed, and formula fed). 2) To determine whether Baby-Friendly practices increase exclusive breast feeding rates in different ethnic populations. This was a retrospective case-control study. Term newborn birth weight, neonatal weights days 0-2, feeding type, type of birth, and demographic information were collected for 1,000 births for the year before Baby-Friendly designation (2010) and 1,000 in 2013 (after designation). Ultimately 683 in the first group and 518 in the second met the inclusion criteria. Mean weight loss decreased day 0-2 for infants in all feeding types after the initiation of Baby-Friendly practices. There was a statistically significant effect of Baby-Friendly designation on weight loss for day 0-2 in exclusively breastfed infants (p Baby-Friendly practices were put in place. There was a decrease in mean weight loss day 0-2 regardless of feeding type after Baby-Friendly designation. Exclusive breast feeding increased in the presence of Baby-Friendly practices.

More Colleges Are Adding Family-Friendly Benefits

Science.gov (United States)

Wilson, Robin

2008-01-01

Results of a new survey of family-friendly benefits by the Center for the Education of Women at the University of Michigan at Ann Arbor show that stopping the tenure clock has become the most common family-friendly benefit in higher education, following paid maternity leave. Other family-friendly policies that top the list in academe allow…

Age-friendly environments and life satisfaction among South Korean elders: person-environment fit perspective.

Science.gov (United States)

Park, Sojung; Lee, Sangchul

2017-07-01

Drawing on the person-environment (P-E) fit perspective, this study examined the role of environment on the well-being of vulnerable older adults in a non-western context. Using the indicators from the World Health Organization's (WHO) framework for age friendly cities (ACF), we examined life satisfaction among South Korean older adults, exploring the extent to which multidimensional environmental characteristics are associated with low socioeconomic status (SES). Using the regionally representative data from the Seoul City-wide needs assessment of middle- and old-aged adults, an analytic sample (N = 1657) focused on community-living individuals aged 65 and older. Multilevel regression models examined interaction between SES subgroups and varying aspects of the environment (i.e. physical, social, and service environment) as related to life satisfaction. Consistent with the environmental docility hypothesis, members of the most vulnerable subgroup in the Korean context - older adults who are living alone and poor - are more likely to have higher life satisfaction when they have higher levels of support in physical and social environments. Interestingly, a higher level of support in the service environment was related to lower life satisfaction for this subgroup. This study provides an empirical foundation for efforts to identify age-friendly environmental characteristics as modifiable environmental resources that can improve older adults' psychological well-being. As the first attempt to use WHO ACF indicators within the P-E fit perspective in a non-Western context, our study provides a foundation for designing support services or programs that effectively meet the needs of vulnerable older adults.

The Promises of Biology and the Biology of Promises

DEFF Research Database (Denmark)

Lee, Jieun

2015-01-01

commitments with differently imagined futures. I argue that promises are constitutive of the stem cell biology, rather than being derivative of it. Since the biological concept of stem cells is predicated on the future that they promise, the biological life of stem cells is inextricably intertwined...... patients’ bodies in anticipation of materializing the promises of stem cell biology, they are produced as a new form of biovaluable. The promises of biology move beyond the closed circuit of scientific knowledge production, and proliferate in the speculative marketplaces of promises. Part II looks at how...... of technologized biology and biological time can appear promising with the backdrop of the imagined intransigence of social, political, and economic order in the Korean society....

Environmental and Financial Evaluation of Passenger Vehicle Technologies in Belgium

Directory of Open Access Journals (Sweden)

Maarten Messagie

2013-11-01

Full Text Available Vehicles with alternative drive trains are regarded as a promising substitute for conventional cars, considering the growing concern about oil depletion and the environmental impact of our transportation system. However, “clean” technologies will only be viable when they are cost-efficient. In this paper, the environmental impacts and the financial costs of different vehicle technologies are calculated for an average Belgian driver. Environmentally friendly vehicles are compared with conventional petrol and diesel vehicles. The assessments are done from a life cycle perspective. The effect on human health, resources and ecosystems is considered when calculating the environmental impact. The total cost of ownership (TCO model includes the purchase price, registration and road taxes, insurance, fuel or electricity cost, maintenance, tires replacement, technical control, battery leasing and battery replacement. In the presented analysis different vehicle technologies and fuels are compared (petrol, diesel, hybrid electric vehicles (HEVs, battery electric vehicles (BEVs and plug-in hybrid electric vehicles (PHEVs on their level of environmental impact and cost per kilometer. The analysis shows a lower environmental impact for electric vehicles. However, electric vehicles have a higher total cost of ownership compared to conventional vehicles, even though the fuel operating costs are significantly lower. The purchase cost of electric vehicles is highly linked to the size of the battery pack, and not to the size of the electric vehicle. This explains the relative high cost for the electric city cars and the comparable cost for the medium and premium cars.

Speech Acts During Friends' and Non-friends' Spontaneous Conversations in Preschool Dyads with High-Functioning Autism Spectrum Disorder versus Typical Development.

Science.gov (United States)

Bauminger-Zviely, Nirit; Golan-Itshaky, Adi; Tubul-Lavy, Gila

2017-05-01

In this study, we videotaped two 10-min. free-play interactions and coded speech acts (SAs) in peer talk of 51 preschoolers (21 ASD, 30 typical), interacting with friend versus non-friend partners. Groups were matched for maternal education, IQ (verbal/nonverbal), and CA. We compared SAs by group (ASD/typical), by partner's friendship status (friend/non-friend), and by partner's disability status. Main results yielded a higher amount and diversity of SAs in the typical than the ASD group (mainly in assertive acts, organizational devices, object-dubbing, and pretend-play); yet, those categories, among others, showed better performance with friends versus non-friends. Overall, a more nuanced perception of the pragmatic deficit in ASD should be adopted, highlighting friendship as an important context for children's development of SAs.

Waste management strategy for cost effective and environmentally friendly NPP decommissioning

Energy Technology Data Exchange (ETDEWEB)

Per Lidar; Arne Larsson [Studsvik Nuclear AB (ndcon partner), Nykoping (Sweden); Niklas Bergh; Gunnar Hedin [Westinghouse Electric Sweden AB (ndcon partner), Vasteraas (Sweden)

2013-07-01

-necks in the process causes increased space requirements and will have negative impact on the project schedule, which increases not only the cost but also the dose exposure to personnel. For these reasons it is critical to create a process that transfers material into conditioned waste ready for disposal as quickly as possible. To a certain extent the decommissioning program should be led by the waste management process. With the objective to reduce time for handling of dismantled material at site and to efficiently and environmental-friendly use waste management methods (clearance for re-use followed by clearance for recycling), the costs for the plant decommissioning could be reduced as well as time needed for performing the decommissioning project. Also, risks for delays would be reduced with a well-defined handling scheme which limits surprises. Delays are a major cost driver for decommissioning projects. (authors)

Waste management strategy for cost effective and environmentally friendly NPP decommissioning

International Nuclear Information System (INIS)

Per Lidar; Arne Larsson; Niklas Bergh; Gunnar Hedin

2013-01-01

-necks in the process causes increased space requirements and will have negative impact on the project schedule, which increases not only the cost but also the dose exposure to personnel. For these reasons it is critical to create a process that transfers material into conditioned waste ready for disposal as quickly as possible. To a certain extent the decommissioning program should be led by the waste management process. With the objective to reduce time for handling of dismantled material at site and to efficiently and environmental-friendly use waste management methods (clearance for re-use followed by clearance for recycling), the costs for the plant decommissioning could be reduced as well as time needed for performing the decommissioning project. Also, risks for delays would be reduced with a well-defined handling scheme which limits surprises. Delays are a major cost driver for decommissioning projects. (authors)

Nordic Analysis of Climate Friendly Buildings

DEFF Research Database (Denmark)

Andresen, Inger; Thomsen, Kirsten Engelund; Wahlstrøm, Åsa

This report summarizes the findings of the work conducted within the project “Nordic Analysis of Climate Friendly Buildings”, financed by the Nordic Council of Ministers. The main goal of the project was to establish a knowledge and decision base for a Nordic innovation program that will promote...... the development and demonstration of low energy and climate friendly buildings. The innovation program should support a development that brings the Nordic countries to an international forefront with respect to business strongholds and market penetration of low energy and climate friendly buildings....

RELATIONSHIP BETWEEN ENVIRONMENTAL CONCERN AND GREEN PURCHASING BEHAVIOR

OpenAIRE

Kasim Tatic; Merima Cinjarevic

2010-01-01

The aim of this paper was to establish the relationship between environmental concern and consumers’ green purchasing behavior. A survey instrument was developed that used scales to measure general environmental beliefs (HEP-NEP general environmental beliefs questions) and consumer’s intention to buy environmental friendly products. Data were collected from a convenient (non-probability sampling method) sample of 150 consumers in the Sarajevo region. The results indicated that significant pos...

Optimized Solvent for Energy-Efficient, Environmentally-Friendly Capture of CO{sub 2} at Coal-Fired Power Plants

Energy Technology Data Exchange (ETDEWEB)

Farthing, G. A.; Rimpf, L. M.

2014-04-30

The overall goal of this project, as originally proposed, was to optimize the formulation of a novel solvent as a critical enabler for the cost-effective, energy-efficient, environmentally-friendly capture of CO{sub 2} at coal-fired utility plants. Aqueous blends of concentrated piperazine (PZ) with other compounds had been shown to exhibit high rates of CO{sub 2} absorption, low regeneration energy, and other desirable performance characteristics during an earlier 5-year development program conducted by B&W. The specific objective of this project was to identify PZ-based solvent formulations that globally optimize the performance of coal-fired power plants equipped with CO{sub 2} scrubbing systems. While previous solvent development studies have tended to focus on energy consumption and absorber size, important issues to be sure, the current work seeks to explore, understand, and optimize solvent formulation across the full gamut of issues related to commercial application of the technology: capital and operating costs, operability, reliability, environmental, health and safety (EH&S), etc. Work on the project was intended to be performed under four budget periods. The objective of the work in the first budget period has been to identify several candidate formulations of a concentrated PZ-based solvent for detailed characterization and evaluation. Work in the second budget period would generate reliable and comprehensive property and performance data for the identified formulations. Work in the third budget period would quantify the expected performance of the selected formulations in a commercial CO{sub 2} scrubbing process. Finally, work in the fourth budget period would provide a final technology feasibility study and a preliminary technology EH&S assessment. Due to other business priorities, however, B&W has requested that this project be terminated at the end of the first budget period. This document therefore serves as the final report for this project. It

Financial development and environmental quality: The way forward

International Nuclear Information System (INIS)

Shahbaz, Muhammad; Shahzad, Syed Jawad Hussain; Ahmad, Nawaz; Alam, Shaista

2016-01-01

The present paper re-examines the asymmetric impact of financial development on environmental quality in Pakistan for the period 1985Q1 to 2014Q4. A comprehensive index of financial development is generated using Bank- and Stock market-based financial development indicators. The results show that inefficient use of energy adversely affects the environmental quality. This suggests adoption of energy efficient technology at both production and consumption levels. These technologies would be helpful to improve environmental quality, enhance the productivity in long-run and save energy. Bank-based financial development also impedes the environment. The government should encourage lenders to ease the funding for energy sector and allocate financial resources for environment friendly businesses rather than wasting them in consumer financing. - Highlights: • A positive shock in economic growth leads carbon emissions. • Energy consumption and financial development add in environmental degradation. • Financial resources should be allocated to environment friendly ventures.

Fashion design solutions for environmentally conscious consumers

Science.gov (United States)

Wagner, M.; Chen, Y.; Curteza, A.; Thomassey, S.; Perwuelz, A.; Zeng, X.

2017-10-01

This paper intends to give an overview of the design solutions in fashion for environmentally conscious consumers, presenting green and ethical practices in contemporary clothing design. The results introduce the concept of slow fashion and discuss available fashion design solutions, giving most prominent examples of sustainable products and brands, these contain one or more design features. By this, the discussion extracts the main contemporary ideas. The presented examples of current offers are all envisioning less impact on the environment and society. Sustainable design solutions use more environmentally friendly materials such as organic cotton, incorporate circular design or design for recycling, e.g., replacing button closures with alternative closing possibilities or leather labels with printed versions, or ensure long product life through durability, among other methods. There are differing designs due to creators’ individuality. This overview can be beneficial for the future development of new solutions for more environmentally friendly fashion.

Achieving Child Friendly Justice through Child Friendly Methods: Let’s Start with the Right to Information

Directory of Open Access Journals (Sweden)

Helen Stalford

2017-09-01

Full Text Available Making the justice process ‘child friendly’ is a key priority for the children’s rights community. An abundance of commentary has been produced by the UN Committee on the Rights of the Child to highlight how justice proceedings can be made more accessible for children and, in 2010, the Council of Europe issued its comprehensive ‘Guidelines on Child Friendly Justice’. Despite these efforts, children remain ill-informed, not just about the nature of justice proceedings in which they may be implicated, but about the very existence and scope of their rights and how to enforce them. Despite unequivocal acknowledgement that the availability and accessibility of information is the crucial starting point in a children’s rights-based approach to dispensing justice, there has been surprisingly little attempt to scrutinise the availability, quality and accessibility of information about laws and policies affecting children. This article takes a closer look at what, exactly, ‘child friendly’ information means in practice. In doing so, we argue that attempts to develop child friendly information have yet to progress beyond adult-driven, largely tokenistic and superficial re-branding exercises. As such, efforts to develop child friendly resources are often of limited value in empowering young people to develop their legal literacy and realise their rights in practice. We reflect on our attempt to develop an explicitly children’s rights-based approach to the development of child friendly resources with a view to enhancing their purchase. This took place in the context of a pilot project, commissioned by the Council of Europe in June 2014, to create a child friendly version of their Child Friendly Justice Guidelines.

Best Friends: Alliances, Friend Ranking, and the MySpace Social Network.

Science.gov (United States)

DeScioli, Peter; Kurzban, Robert; Koch, Elizabeth N; Liben-Nowell, David

2011-01-01

Like many topics of psychological research, the explanation for friendship is at once intuitive and difficult to address empirically. These difficulties worsen when one seeks, as we do, to go beyond "obvious" explanations ("humans are social creatures") to ask deeper questions, such as "What is the evolved function of human friendship?" In recent years, however, a new window into human behavior has opened as a growing fraction of people's social activity has moved online, leaving a wealth of digital traces behind. One example is a feature of the MySpace social network that allows millions of users to rank their "Top Friends." In this study, we collected over 10 million people's friendship decisions from MySpace to test predictions made by hypotheses about human friendship. We found particular support for the alliance hypothesis, which holds that human friendship is caused by cognitive systems that function to create alliances for potential disputes. Because an ally's support can be undermined by a stronger outside relationship, the alliance model predicts that people will prefer partners who rank them above other friends. Consistent with the alliance model, we found that an individual's choice of best friend in MySpace is strongly predicted by how partners rank that individual. © The Author(s) 2011.

Bacteriophage-Based Bacterial Wilt Biocontrol for an Environmentally Sustainable Agriculture

Directory of Open Access Journals (Sweden)

Belén Álvarez

2017-07-01

Full Text Available Bacterial wilt diseases caused by Ralstonia solanacearum, R. pseudosolanacearum, and R. syzygii subsp. indonesiensis (former R. solanacearum species complex are among the most important plant diseases worldwide, severely affecting a high number of crops and ornamentals. Difficulties of bacterial wilt control by non-biological methods are related to effectiveness, bacterial resistance and environmental impact. Alternatively, a great many biocontrol strategies have been carried out, with the advantage of being environmentally friendly. Advances in bacterial wilt biocontrol include an increasing interest in bacteriophage-based treatments as a promising re-emerging strategy. Bacteriophages against the bacterial wilt pathogens have been described with either lytic or lysogenic effect but, they were proved to be active against strains belonging to R. pseudosolanacearum and/or R. syzygii subsp. indonesiensis, not to the present R. solanacearum species, and only two of them demonstrated successful biocontrol potential in planta. Despite the publication of three patents on the topic, until now no bacteriophage-based product is commercially available. Therefore, there is still much to be done to incorporate valid bacteriophages in an integrated management program to effectively fight bacterial wilt in the field.

Bacteriophage-Based Bacterial Wilt Biocontrol for an Environmentally Sustainable Agriculture.

Science.gov (United States)

Álvarez, Belén; Biosca, Elena G

2017-01-01

Bacterial wilt diseases caused by Ralstonia solanacearum , R. pseudosolanacearum , and R. syzygii subsp. indonesiensis (former R. solanacearum species complex) are among the most important plant diseases worldwide, severely affecting a high number of crops and ornamentals. Difficulties of bacterial wilt control by non-biological methods are related to effectiveness, bacterial resistance and environmental impact. Alternatively, a great many biocontrol strategies have been carried out, with the advantage of being environmentally friendly. Advances in bacterial wilt biocontrol include an increasing interest in bacteriophage-based treatments as a promising re-emerging strategy. Bacteriophages against the bacterial wilt pathogens have been described with either lytic or lysogenic effect but, they were proved to be active against strains belonging to R. pseudosolanacearum and/or R. syzygii subsp. indonesiensis , not to the present R. solanacearum species, and only two of them demonstrated successful biocontrol potential in planta . Despite the publication of three patents on the topic, until now no bacteriophage-based product is commercially available. Therefore, there is still much to be done to incorporate valid bacteriophages in an integrated management program to effectively fight bacterial wilt in the field.

The new heating. Environmental-friendly and effectively heating with natural gas, wood, electricity and solar power; Die neue Heizung. Umweltfreundlich und wirtschaftlich heizen mit Gas, Holz, Strom und Sonnenenergie

Energy Technology Data Exchange (ETDEWEB)

Schulz, Marion; Westkaemper, Hubert

2013-02-01

Comfortable, climate-friendly and cost-effective heating technologies inclusive preparation of hot water and ventilation systems: Which technology is the best, most economical and most environmental one? Which fuel is economic as well as assured of a good future, if a new building or an energetically retrofitted old building is equipped with a heating system? These are the key issues for the house owners / building owners, planners, consultants and craftsmen. The book under consideration tries to answer these questions. Construction, planning benchmark figures and operational areas of modern heating technologies are described. The costs, the environmental pollutions and the economic efficiency of the most important systems are compared. The book contains hints on the decisive details of modern, energy saving system engineering including hot water preparation and ventilation technology. This handbook is suited for the selection and planning of energy saving and future-oriented heating systems.

Influence of friends on children's physical activity: a review.

Science.gov (United States)

Maturo, Claire C; Cunningham, Solveig A

2013-07-01

We examined evidence for friendship influences on children's physical activity (PA) through systematic searches of online databases in May 2012. We identified 106 studies (25 qualitative) published in English since 2000 that analyzed indicators of friendship influences (e.g., communication about PA, friends' PA, and PA with friends) among persons younger than 19 years. Children's PA was positively associated with encouragement from friends (43 of 55 studies indicating a positive relationship), friends' own PA (30/35), and engagement with friends in PA (9/10). These findings are consistent with friends influencing PA, but most studies did not isolate influence from other factors that could explain similarity. Understanding friendship influences in childhood can facilitate the promotion of lifelong healthy habits. PA with friends should be considered in health promotion programs.

Environmental tools in product development

DEFF Research Database (Denmark)

Wenzel, Henrik; Hauschild, Michael Zwicky; Jørgensen, Jørgen

1994-01-01

A precondition for design of environmentally friendly products is that the design team has access to methods and tools supporting the introduction of environmental criteria in product development. A large Danish program, EDIP, is being carried out by the Institute for Product Development, Technical...... University of Denmark, in cooperation with 5 major Danish companies aiming at the development and testing of such tools. These tools are presented in this paper...

Unsettling Environmental Management: Reflections from Two Environmental Studies Graduates in Singapore

Science.gov (United States)

Ho, Ezra; Ang, Nicholas

2018-01-01

Environmental and sustainability programmes in higher education have gained traction over the last several decades. More-than-disciplinary epistemologies and innovative pedagogies promise transformational learning to grapple with contemporary environmental challenges. Environmental programmes thus have implicit messages of social change.…

The importance of message framing for providing information about sustainability and environmental aspects of energy

Energy Technology Data Exchange (ETDEWEB)

Van de Velde, Liesbeth; Verbeke, Wim; Van Huylenbroeck, Guido [Department of Agricultural Economics, Ghent University, Coupure Links 653, 9000 Gent (Belgium); Popp, Michael [Department of Agricultural Economics and Agribusiness, University of Arkansas, 217 Agriculture Building, Fayetteville, AR 72701 (United States)

2010-10-15

With a looming energy crisis, energy conservation and attention to environmental problems are warranted. The transport sector experiences great challenges to introduce more environmental friendly renewable energy like biofuels. The majority of the Belgian people are asking for more information about this issue. Because individuals are sensitive to how information is presented, the choice of the message frame can significantly influence attitudes and behavioural intention. Because of the strengthening effect on both concern and PCE, our findings suggest that for the prevention of energy and environmental problems and the promotion of a more sustainable and environmental friendly energy consumption not the gravity of these problems and the possible disadvantages but the possibilities to overcome these problems (e.g. reduction of energy use, environmental friendly energy sources) have to be stressed. Men, higher educated people, people between 35 and 54 years old and people with the most pro-environmental attitude are less affected by the message frame, while the choice of the frame is more important when addressing women, people younger than 35 and older than 55 years, lower educated and less pro-environmental people. (author)

The importance of message framing for providing information about sustainability and environmental aspects of energy

International Nuclear Information System (INIS)

Van de Velde, Liesbeth; Verbeke, Wim; Popp, Michael; Van Huylenbroeck, Guido

2010-01-01

With a looming energy crisis, energy conservation and attention to environmental problems are warranted. The transport sector experiences great challenges to introduce more environmental friendly renewable energy like biofuels. The majority of the Belgian people are asking for more information about this issue. Because individuals are sensitive to how information is presented, the choice of the message frame can significantly influence attitudes and behavioural intention. Because of the strengthening effect on both concern and PCE, our findings suggest that for the prevention of energy and environmental problems and the promotion of a more sustainable and environmental friendly energy consumption not the gravity of these problems and the possible disadvantages but the possibilities to overcome these problems (e.g. reduction of energy use, environmental friendly energy sources) have to be stressed. Men, higher educated people, people between 35 and 54 years old and people with the most pro-environmental attitude are less affected by the message frame, while the choice of the frame is more important when addressing women, people younger than 35 and older than 55 years, lower educated and less pro-environmental people.

Study questions environmental impact of fuel-cell vehicles

Science.gov (United States)

Stafford, Ned

2015-09-01

Fuel-cell electric vehicles are seen by many as an environmentally friendly technology that can reduce greenhousegas emissions by producing no harmful emissions. But a new study has found that overall a fuel cell electric vehicle has about the same negative environmental impact as a luxury sports car.

The power and promise of feminist research in environmental ...

African Journals Online (AJOL)

I have been arguing for recognition of the absence and need for inclusion of women's perspectives in environmental education research and pedagogy for some time (see, for example, Greenan Gough 1993, Gough 1987b, 1999). In this paper I explore the related issue of the potential of adopting feminist research methods ...

Development of environmental-friendly wire and cable

International Nuclear Information System (INIS)

Ueno, Keiji

1996-01-01

The electron beam technology has been used in many industrial fields as a method of conventional polymer modification or optimum processability. The main industrial fields of radiation crosslinking are wire and cable, heat shrinkable tubings, plastic foams, precuring of tires, floppy disk curing, foods packaging films, and so on. The radiation crosslinking of wire and cable was started in 1961 in Japan and 15 wire and cable companies are now using electron beam accelerators for production or R and D. The dominant characteristics of crosslinking of insulation materials are application at high temperature, good oil and chemical resistibility and high mechanical properties. These radiation crosslinking wire and cable are applied widely in electronics equipments and automobiles. Recently, electronics manufacturers have indicated deep concern over the effects on the environment. Wire and cable also are required to be applicable for environmental preservation. (J.P.N.)

Parental influences on memories of parents and friends.

Science.gov (United States)

Tani, Franca; Bonechi, Alice; Peterson, Carole; Smorti, Andrea

2010-01-01

The authors evaluated the role parent-child relationship quality has on two types of memories, those of parents and those of friends. Participants were 198 Italian university students who recalled memories during 4 separate timed memory-fluency tasks about their preschool, elementary school, middle school, high school and university years. Half were instructed to recall memories involving parents and the remainder memories involving friends. Moreover, parent-child relationships were assessed by the Network of Relationships Inventory (NRI; W. Furman & D. Buhrmester, 1985) and Adolescents' Report of Parental Monitoring (D. M. Capaldi & G. R. Patterson, 1989). Results showed that men with positive parent-son relationships had more memories of parents and more affectively positive memories of friends, supporting a consistency model positing similarity between parent-child relationships and memories of friends. Women with positive parental relationship quality had more affectively positive memories of parents but for friends, positive relationship quality only predicted positive memories when young. At older ages, especially middle school-aged children, negative parent-daughter relationships predicted more positive memories of friends, supporting a compensatory model. The gender of parent also mattered, with fathers having a more influential role on affect for memories of friends.

Eco friendly expectations and limitations in daycare

DEFF Research Database (Denmark)

Husted, Mia

This presentation elaborates on expectations and limitations of eco-friendly pedagogical responses to the sustainability crisis. The pedagogical perspectives on eco-friendly responses originates from an action research project involving pedagogues in day care centers and teachers at a University ...... College in Denmark. As part of the project they were asked to explore, elaborate and develop new pedagogical actions and perspectives related to future relationships between human beings and our common nature......This presentation elaborates on expectations and limitations of eco-friendly pedagogical responses to the sustainability crisis. The pedagogical perspectives on eco-friendly responses originates from an action research project involving pedagogues in day care centers and teachers at a University...

Dye sensitized solar cell based on environmental friendly eosin Y dye and Al doped titanium dioxide nano particles

Science.gov (United States)

Kulkarni, Swati S.; Bodkhe, Gajanan A.; Shirsat, Sumedh M.; Hussaini, S. S.; Shejwal, N. N.; Shirsat, Mahendra D.

2018-03-01

Present communication deals with the development of cost effective dye sensitized solar cell (DSSC) with eco-friendly materials. Eco-friendly Eosin Y dye was used to sensitize photo anode which was fabricated using undoped and Aluminium doped titanium dioxide (TiO2) nanoparticles. Undoped and Aluminium doped TiO2 nanoparticles were synthesized by simple and cost effective sol-gel method. Aluminium doped and undoped TiO2 nanoparticles were characterized using UV-visible, FT-IR spectroscopy, x-ray Diffraction, and Scanning Electron Micrograph with EDX. The photo-voltaic activity of the cell was studied under light irradiation of 100 milliwatt cm-2. Aluminium doped TiO2 nanoparticle photo electrode exhibits more than 60% increase in cell efficiency as compared to the undoped TiO2 nanoparticle photo electrode.

New insights into liquid chromatography for more eco-friendly analysis of pharmaceuticals.

Science.gov (United States)

Shaaban, Heba

2016-10-01

Greening the analytical methods used for analysis of pharmaceuticals has been receiving great interest aimed at eliminating or minimizing the amount of organic solvents consumed daily worldwide without loss in chromatographic performance. Traditional analytical LC techniques employed in pharmaceutical analysis consume tremendous amounts of hazardous solvents and consequently generate large amounts of waste. The monetary and ecological impact of using large amounts of solvents and waste disposal motivated the analytical community to search for alternatives to replace polluting analytical methodologies with clean ones. In this context, implementing the principles of green analytical chemistry (GAC) in analytical laboratories is highly desired. This review gives a comprehensive overview on different green LC pathways for implementing GAC principles in analytical laboratories and focuses on evaluating the greenness of LC analytical procedures. This review presents green LC approaches for eco-friendly analysis of pharmaceuticals in industrial, biological, and environmental matrices. Graphical Abstract Green pathways of liquid chromatography for more eco-friendly analysis of pharmaceuticals.

NEW POSSIBILITIES OF ENVIRONMENTALY FRIENDLY CLEANING METHOD BY LASER TECHNOLOGY

Directory of Open Access Journals (Sweden)

Lýdia Sobotová

2016-12-01

Full Text Available Still deteriorating environment, requirements for reducing of production waste, requirements for the protection of the working environment, the formation of new technologies and materials, as well as the economic conditions are forcing manufacturers to use the environmentally friendly technology. The contribution deals with new progressive possibilities of cleaning products, raw materials and with the establishment of a minimum production waste. The research focuses on the possibilities of laser cleaning of materials, under defined technological conditions. In the contribution is presented the results of realized experiments in Technical University of Kosice, together created in cooperation with Trumpf Slovakia, s.r.o

An analysis of environmental data transmission

Science.gov (United States)

Yuan, Lina; Chen, Huajun; Gong, Jing

2017-05-01

To comprehensively construct environmental automatic monitoring has become the urgent need of environmental management, is a major measure to implement the scientific outlook on development and build a harmonious socialist society, and is an inevitable choice of “building a resource-conserving and environment-friendly society”, which is of great importance and profound significance to adjust the economic structure and transform growth pattern. This article first introduces the importance of environmental data transmission, then expounds the characteristics, key technologies, transmitting mode, and design ideas of environmental data transmission process, and finally, summarizes the full text.

Feasibility of multi-sector policy measures that create activity-friendly environments for children: results of a Delphi study

Directory of Open Access Journals (Sweden)

Aarts Marie-Jeanne

2011-12-01

Full Text Available Abstract Background Although multi-sector policy is a promising strategy to create environments that stimulate physical activity among children, little is known about the feasibility of such a multi-sector policy approach. The aims of this study were: to identify a set of tangible (multi-sector policy measures at the local level that address environmental characteristics related to physical activity among children; and to assess the feasibility of these measures, as perceived by local policy makers. Methods In four Dutch municipalities, a Delphi study was conducted among local policy makers of different policy sectors (public health, sports, youth and education, spatial planning/public space, traffic and transportation, and safety. In the first Delphi round, respondents generated a list of possible policy measures addressing three environmental correlates of physical activity among children (social cohesion, accessibility of facilities, and traffic safety. In the second Delphi round, policy makers weighted different feasibility aspects (political feasibility, cultural/community acceptability, technical feasibility, cost feasibility, and legal feasibility and assessed the feasibility of the policy measures derived from the first round. The third Delphi round was aimed at reaching consensus by feedback of group results. Finally, one overall feasibility score was calculated for each policy measure. Results Cultural/community acceptability, political feasibility, and cost feasibility were considered most important feasibility aspects. The Delphi studies yielded 16 feasible policy measures aimed at physical and social environmental correlates of physical activity among children. Less drastic policy measures were considered more feasible, whereas environmental policy measures were considered less feasible. Conclusions This study showed that the Delphi technique can be a useful tool in reaching consensus about feasible multi-sector policy measures. The

Environmental model for a capital city

Directory of Open Access Journals (Sweden)

Claudia Eugenia Toca Torres

2013-06-01

Full Text Available From a review of the various options for modeling a sustainable development in its environmental dimension, this research proposes a model of environmental impact for Bogota, using the Vensim PLE software to model the pollution, the pollution load and soil contamination. The model includes a limited number of endogenous variables, as well as a greater number of exogenous variables. This modeling allows us to anticipate the environmental situation in the capital, in order to support public policies for addressing issues such as economic sanctions and moral regulations on emissions, discharges and waste, environmental measures and environmentally friendly practices

Fermilab Friends for Science Education | Programs

Science.gov (United States)

Fermilab Friends for Science Education FFSE Home About Us Join Us Support Us Contact Us Programs Donors Board of Directors Board Tools Calendar Join Us Donate Now Get FermiGear! Education Office Search photo Fermilab Friends for Science Education, in partnership with Fermilab and area educators, designs

Best friends' discussions of social dilemmas.

Science.gov (United States)

McDonald, Kristina L; Malti, Tina; Killen, Melanie; Rubin, Kenneth H

2014-02-01

Peer relationships, particularly friendships, have been theorized to contribute to how children and adolescents think about social and moral issues. The current study examined how young adolescent best friends (191 dyads; 53.4% female) reason together about multifaceted social dilemmas and how their reasoning is related to friendship quality. Mutually-recognized friendship dyads were videotaped discussing dilemmas entailing moral, social-conventional and prudential/pragmatic issues. Both dyad members completed a self-report measure of friendship quality. Dyadic data analyses guided by the Actor-Partner Interdependence Model indicated that adolescent and friend reports of friendship qualities were related to the forms of reasoning used during discussion. Friends who both reported that they could resolve conflicts in a constructive way were more likely to use moral reasoning than friends who reported that their conflict resolution was poor or disagreed on the quality of their conflict resolution. The findings provide evidence for the important role that friendship interaction may play in adolescents' social and moral development.

How Can I Help a Friend Who Cuts?

Science.gov (United States)

... Safe Videos for Educators Search English Español How Can I Help a Friend Who Cuts? KidsHealth / For Teens / How Can I Help a Friend Who Cuts? What's in ... them? If so, what should you do? It can be hard to understand why a friend might ...

Nanomaterials A Danger or a Promise? A Chemical and Biological Perspective

CERN Document Server

Fiévet, Fernand; Coradin, Thibaud

2013-01-01

With the increased presence of nanomaterials in commercial products such as cosmetics and sunscreens, fillers in dental fillings, water filtration process, catalysis, photovoltaic cells, bio-detection, a growing public debate is emerging on toxicological and environmental effects of direct and indirect exposure to these materials. Nanomaterials: A Danger or a Promise? forms a balanced overview of the health and environmental issues of nanoscale materials.   By considering both the benefits and risks associated with nanomaterials, Nanomaterials: A Danger or a Promise? compiles a complete and detailed image of the many aspects of the interface between nanomaterials and their real-life application. The full cycle of nanomaterials life will be presented and critically assessed to consider and answer questions such as: ·         How are nanomaterials made? ·         What they are used for? ·         What is their environmental fate? ·         Can we make them better?   Includi...

Is Formal Environmental Education Friendly to Nature? Environmental Ethics in Science Textbooks for Primary School Pupils in Poland

Science.gov (United States)

Gola, Beata

2017-01-01

Due to the increased interest in ecology, global warming and numerous environmental problems, ecological issues are becoming extremely important in education. Many researchers and thinkers believe that solutions to environmental problems are affected by the environmental ethics adopted. This article identifies which of the three branches of…

An environmental assessment of grass-finishing beef operations in Pennsylvania

Science.gov (United States)

Concern for the environmental sustainability of traditional beef production has increased consumer interest in alternatively produced beef products perceived to be more environmentally friendly. This includes those marketed under “grassfed beef” labels. However, little information exists on the env...

Cost And Environmental Optimization Of Waste Supply Chains Using Clca

DEFF Research Database (Denmark)

Sacchi, Romain; Wæhrens, Brian Vejrum; Prosman, Ernst Johannes

2016-01-01

Although circular supply chains are widely perceived as a huge leap towards a more environmentally friendly economy, supply chain literature lacks environmental supplier selection criteria (E-SSC) for circular supply chains. Taking into account the various characteristics of circular supply chains...

Effective recovery of poly-β-hydroxybutyrate (PHB) biopolymer from Cupriavidus necator using a novel and environmentally friendly solvent system.

Science.gov (United States)

Fei, Tao; Cazeneuve, Stacy; Wen, Zhiyou; Wu, Lei; Wang, Tong

2016-05-01

This work demonstrates a significant advance in bioprocessing for a high-melting lipid polymer. A novel and environmental friendly solvent mixture, acetone/ethanol/propylene carbonate (A/E/P, 1:1:1 v/v/v) was identified for extracting poly-hydroxybutyrate (PHB), a high-value biopolymer, from Cupriavidus necator. A set of solubility curves of PHB in various solvents was established. PHB recovery of 85% and purity of 92% were obtained from defatted dry biomass (DDB) using A/E/P. This solvent mixture is compatible with water, and from non-defatted wet biomass, PHB recovery of 83% and purity of 90% were achieved. Water and hexane were evaluated as anti-solvents to assist PHB precipitation, and hexane improved recovery of PHB from biomass to 92% and the purity to 93%. A scale-up extraction and separation reactor was designed, built and successfully tested. Properties of PHB recovered were not significantly affected by the extraction solvent and conditions, as shown by average molecular weight (1.4 × 10(6) ) and melting point (175.2°C) not being different from PHB extracted using chloroform. Therefore, this biorenewable solvent system was effective and versatile for extracting PHB biopolymers. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:678-685, 2016. © 2016 American Institute of Chemical Engineers.

Friend suggestion in social network based on user log

Science.gov (United States)

Kaviya, R.; Vanitha, M.; Sumaiya Thaseen, I.; Mangaiyarkarasi, R.

2017-11-01

Simple friend recommendation algorithms such as similarity, popularity and social aspects is the basic requirement to be explored to methodically form high-performance social friend recommendation. Suggestion of friends is followed. No tags of character were followed. In the proposed system, we use an algorithm for network correlation-based social friend recommendation (NC-based SFR).It includes user activities like where one lives and works. A new friend recommendation method, based on network correlation, by considering the effect of different social roles. To model the correlation between different networks, we develop a method that aligns these networks through important feature selection. We consider by preserving the network structure for a more better recommendations so that it significantly improves the accuracy for better friend-recommendation.

Ethnic Differences among Friend Networks Later in Life

Science.gov (United States)

Kang, Hyunsook; Hebert, Corie

2014-01-01

This study seeks to broaden the understanding of friend relationships in older adults and the differences in those friend relationships among various ethnic groups. Secondary data from the National Social Life, Health and Aging Project (NSHAP) was analyzed to test the hypothesis that Caucasian older adults have stronger friend networks than older…

Maternal Affection Moderates Friend Influence on Schoolwork Engagement

Science.gov (United States)

Marion, Donna; Laursen, Brett; Kiuru, Noona; Nurmi, Jari-Erik; Salmela-Aro, Katariina

2014-01-01

This study investigated friend influence over adolescent schoolwork engagement in 160 same-sex friend dyads (94 female dyads and 66 male dyads). Participants were approximately 16 years of age at the outset. Each friend described his or her own schoolwork engagement, school burnout, and perceptions of maternal affection. The results revealed that…

Pilot testing of environment-friendly low-emission alternative drive components for city buses. Phase 1. Technical final report

International Nuclear Information System (INIS)

Doemeland, H.; Haase, G.; Sarnes, J.; Schultheis, S.; Schuenemann, M.; Strauss, A.; Voss, K.; Aepler, E.; Stachel, K.; Wolter, M.; Lenz, W.

1993-05-01

The report describes pilot tests of environment-friendly, low-emission city buses with alternative drive systems. The following problems are discussed: Natural gas as primary energy source, natural gas drives, safety requirements, measurement and testing technology for natural gas engines, environmental effects, operating concepts, operating cost. (HW) [de

Adolescent friend similarity on alcohol abuse as a function of participation in romantic relationships: Sometimes a new love comes between old friends.

Science.gov (United States)

DeLay, Dawn; Laursen, Brett; Bukowski, William M; Kerr, Margaret; Stattin, Håkan

2016-01-01

This study tests the hypothesis that adolescents with romantic partners are less similar to their friends on rates of alcohol abuse than adolescents without romantic partners. Participants (662 girls, 574 boys) ranging in age from 12 to 19 years nominated friends and romantic partners, and completed a measure of alcohol abuse. In hierarchical linear models, friends with romantic partners were less similar on rates of alcohol abuse than friends without romantic partners, especially if they were older and less accepted. Follow-up longitudinal analyses were conducted on a subsample (266 boys, 374 girls) of adolescents who reported friendships that were stable across 2 consecutive years. Associations between friend reports of alcohol abuse declined after adolescents became involved in a romantic relationship, to the point at which they became more similar to their romantic partners than to their friends. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

Joint Test Protocol: Environmentally Friendly Zirconium Oxide Pretreatment Demonstration

Science.gov (United States)

2013-12-01

and compliance issues associated with the use of zinc phosphate and chromate/ chrome containing conversion coatings while maintaining military...safety, and occupational health risks associated with the use of zinc phosphate and chromate/ chrome -containing conversion coatings. There is a need to...zirconium-based pretreatment will be shown to be both environmentally acceptable (no hazardous air pollutants or heavy metals such as hexavalent chromium

Photonics (the control of light) at the core of the environmental transition

International Nuclear Information System (INIS)

GeddaMudrov, Karl

2017-01-01

At the core of the environmental transition, photonics is reinventing our lives: smart, sustainable cities (the production of renewable energy and optimization of energy consumption, above all by the telecommunications infrastructure), factories of the future (precise and cleaner processes that consume fewer raw materials), etc. Photonic inventions (enhanced virtual reality and optical sensors) push in the same direction - toward the production of eco-friendly products in environmentally friendly factories. However they might go farther and be disruptive as they replace methods of mass production with individualized methods of production

Friends, family and social belonging as we age

Directory of Open Access Journals (Sweden)

2015-09-01

Aims: This study investigated if perceptions of social belonging in late adulthood are differentiated by the quality of family and friend relationships. Method:  The study consisted of two phases.  In Phase 1, 260 university staff and students, aged 18 to 75, completed an online survey investigating the quality of family and friend relationships and their association with social belonging.  In Phase 2, 88 older adults completed a refined print version of the survey.   Results:  Multiple regression was used to analyse the predictive ability of family and friend relationships on social belonging. In Phase 1, significant associations were found between both family and friend relationships and social belonging, with friendship yielding the strongest relationship.  Interestingly, in Phase 2 the association between quality of family and friend relationships and social belonging was mediated by age. Those aged 65 to 74 reported a significant relationship between friends and social belonging, which contrasted with those aged over 75.  A significant association between social belonging and family relationships was also found for the entire cohort aged over 65, while high quality friend relationships enhanced social belonging when family relationships were not strong. Conclusions: These results are tentative, but suggest that future research should consider the role that both friendships and family play in promoting social belonging in older adults.

Gratitude for help among adult friends and siblings.

Science.gov (United States)

Rotkirch, Anna; Lyons, Minna; David-Barrett, Tamas; Jokela, Markus

2014-07-06

Although gratitude is a key prosocial emotion reinforcing reciprocal altruism, it has been largely ignored in the empirical literature. We examined feelings of gratitude and the importance of reciprocity in same-sex peer relations. Participants were 772 individuals (189 men; mean age = 28.80) who completed an online survey using a vignette design. We investigated (i) differences in reported gratitude and the importance of reciprocity among same-sex siblings and same-sex friends, and (ii) how relationship closeness moderates these associations. Based on the theory of kin altruism, we expect that people would feel more grateful towards friends than towards their siblings, and that lack of gratitude or failure to pay back a loan would bother more with friends than with siblings, irrespective of emotional closeness. Results showed that levels of gratitude and expectations of reciprocity were higher towards friends compared to siblings. This was the case also after controlling for emotional closeness. Being close generally made participants feel more grateful and expect lower displays of gratitude in the other. Closeness was also strongly associated with emotional gratitude among siblings compared to friends. We conclude that feelings and displays of gratitude have a special role in friendships. Although a close sibling may elicit as much gratitude as a friend does, even a very close friend is not exempt from the logic of reciprocity in the same way that a sibling is.

Environmental benefits and drawbacks of composite fuels based on industrial wastes and different ranks of coal.

Science.gov (United States)

Nyashina, G S; Vershinina, K Yu; Dmitrienko, M A; Strizhak, P A

2018-04-05

A promising solution to many problems that thermal power industry is facing today would be switching from conventional coal dust combustion to coal-water slurries containing petrochemicals (CWSP). Here, we perform an experimental study of the most hazardous anthropogenic emissions (sulfur and nitrogen oxides) from the combustion of high-potential CWSP. We identify the main benefits and potential drawbacks of using CWSP in thermal power industry. A set of components and additives to CWSP are explored that significantly affect the environmental and energy performance of fuels. The anthropogenic emissions from the combustion of CWSP made of widespread coal and oil processing wastes are no higher than those from coal dust combustion. Using specialized additives to CWSP, we can change the concentrations of NO x and SO x several times. The most appealing additives to CWSP are sawdust, straw, charcoal, limestone, and glycerol. They provide better environmental, economic, and energy performance and improve the rheological properties of CWSP. Waste oils and oil sludge added to CWSP may impair the environmental performance but boost the cost and energy efficiency. Using coal-water slurries containing petrochemicals as a fuel at thermal power plants is an environmentally friendly as well as cost- and energy-efficient way to recover industrial wastes. Copyright © 2018 Elsevier B.V. All rights reserved.

The Importance of Pro-Environmental Behavior in Adolescent

Science.gov (United States)

Palupi, Tyas; Sawitri, Dian R.

2018-02-01

Studies regarding pro-environmental behavior in adolescents are lacking. This study aimed to examine the importance of pro-environmental behavior in adolescents (high school and university students) by conducting literature review from previous studies on pro environmental behavior. Pro-environmental behavior is the behavior of individuals that contributes towards environmental preservation. Based on previous studies, measurement of pro-environmental behavior were investigated on several theories, namely theory of planned behavior (TPB) and value, belief, norms (VBN) by using aspects of pro environmental behavior. Young people with critical thinking, and good environmental education, are expected to behave more environmentally friendly for creating a sustainable future.

Fuzzy promises

DEFF Research Database (Denmark)

Anker, Thomas Boysen; Kappel, Klemens; Eadie, Douglas

2012-01-01

as narrative material to communicate self-identity. Finally, (c) we propose that brands deliver fuzzy experiential promises through effectively motivating consumers to adopt and play a social role implicitly suggested and facilitated by the brand. A promise is an inherently ethical concept and the article...... concludes with an in-depth discussion of fuzzy brand promises as two-way ethical commitments that put requirements on both brands and consumers....

Exploring the Notion of the Family Friendly City

Science.gov (United States)

Provi Drianda, Riela

2018-05-01

There is a common perception that downtown areas will never attract families and big cities are not the best place to raise children. Particularly the downtown areas of cities been depicted as the place where criminals, prostitutes, drug-sellers, and other dangerous strangers live. People with children are more likely to look for the suburbs to find bigger housing with more affordable prices, cleaner air, richer nature, a slower lifestyle, and safer environment. However, living in the modern suburb is not always easy and cheap, especially for those who need to commute to the central city. Dealing with the long commutes can be stressful and it affects the health, happiness, and well-being of family members. As the number of modern families with both parents in the workforce is rising, the demand to live closer to the workplace is getting stronger and growing. In some parts of the world, more families increasingly want to live in the cities. This trend can be seen in the United States, Japan, Korea, and Canada. Being family-friendly has become increasingly important for modern cities as more millennial generation show the tendency to raise their families in the urban area. Moreover, it is predicted that two-thirds of world’s population will live in cities by 2030. To accommodate the growing population, in particular, those with children, modern cities should be developed to suit urban families. But what criteria and qualities make one city more family-friendly than another? What would a family-friendly city look like? To date, the number studies exploring the notion of the family-friendly city has been very limited. Most studies have been focusing on the notion of family-friendly dwellings, family-friendly workplaces, or child-friendly cities. This paper brings together and examines the dominant and recurring ideas about the family-friendly city represented in the relevant literature and current urban practices. This paper also questions whether the concept of the

Green Synthesis of Nanomaterials: Environmental Aspects

Science.gov (United States)

There is always a search for reliable and environmentally friendly processes to manufacture metal and metal oxide nanoparticles minimizing or even eliminating the use of hazardous chemicals. The only way to develop these “green” processes is to adapt benign synthesis approaches t...

Gratitude for Help among Adult Friends and Siblings

Directory of Open Access Journals (Sweden)

Anna Rotkirch

2014-10-01

Full Text Available Although gratitude is a key prosocial emotion reinforcing reciprocal altruism, it has been largely ignored in the empirical literature. We examined feelings of gratitude and the importance of reciprocity in same-sex peer relations. Participants were 772 individuals (189 men; mean age = 28.80 who completed an online survey using a vignette design. We investigated (i differences in reported gratitude and the importance of reciprocity among same-sex siblings and same-sex friends, and (ii how relationship closeness moderates these associations. Based on the theory of kin altruism, we expect that people would feel more grateful towards friends than towards their siblings, and that lack of gratitude or failure to pay back a loan would bother more with friends than with siblings, irrespective of emotional closeness. Results showed that levels of gratitude and expectations of reciprocity were higher towards friends compared to siblings. This was the case also after controlling for emotional closeness. Being close generally made participants feel more grateful and expect lower displays of gratitude in the other. Closeness was also strongly associated with emotional gratitude among siblings compared to friends. We conclude that feelings and displays of gratitude have a special role in friendships. Although a close sibling may elicit as much gratitude as a friend does, even a very close friend is not exempt from the logic of reciprocity in the same way that a sibling is.

What they bring: baseline psychological distress differentially predicts neural response in social exclusion by children's friends and strangers in best friend dyads.

Science.gov (United States)

Baddam, Suman; Laws, Holly; Crawford, Jessica L; Wu, Jia; Bolling, Danielle Z; Mayes, Linda C; Crowley, Michael J

2016-11-01

Friendships play a major role in cognitive, emotional and social development in middle childhood. We employed the online Cyberball social exclusion paradigm to understand the neural correlates of dyadic social exclusion among best friends assessed simultaneously. Each child played with their friend and an unfamiliar player. Event-related potentials (ERPs) were assessed via electroencephalogram during exclusion by friend and unfamiliar peer. Data were analyzed with hierarchical linear modeling to account for nesting of children within friendship dyads. Results showed that stranger rejection was associated with larger P2 and positive slow wave ERP responses compared to exclusion by a friend. Psychological distress differentially moderated the effects of friend and stranger exclusion such that children with greater psychological distress were observed to have larger neural responses (larger P2 and slow wave) to exclusion by a stranger compared to exclusion by a friend. Conversely, children with lower levels of psychological distress had larger neural responses for exclusion by a friend than by a stranger. Psychological distress within the dyad differentially predicted the P2 and slow wave response. Findings highlight the prominent, but differential role of individual and dyadic psychological distress levels in moderating responses to social exclusion in middle childhood. © The Author (2016). Published by Oxford University Press.

Signals of inflation in a friendly string landscape

International Nuclear Information System (INIS)

March-Russell, John; Riva, Francesco

2006-01-01

Following Freivogel et al we consider inflation in a predictive (or 'friendly') region of the landscape of string vacua, as modeled by Arkani-Hamed, Dimopoulos and Kachru. In such a region the dimensionful coefficients of super-renormalizable operators unprotected by symmetries, such as the vacuum energy and scalar mass-squareds are freely scanned over, and the objects of study are anthropically or 'environmentally' conditioned probability distributions for observables. In this context we study the statistical predictions of (inverted) hybrid inflation models, where the properties of the inflaton are probabilistically distributed. We derive the resulting distributions of observables, including the deviation from flatness 1-Ω, the spectral index of scalar cosmological perturbations n s (and its scale dependence dn s /dlog k), and the ratio of tensor to scalar perturbations r. The environmental bound on the curvature implies a solution to the η-problem of inflation with the predicted distribution of (1-n s ) indicating values close to current observations. We find a relatively low probability (< 3%) of 'just-so' inflation with measurable deviations from flatness. Intermediate scales of inflation are preferred in these models

Organic Foods: Do Eco-Friendly Attitudes Predict Eco-Friendly Behaviors?

Science.gov (United States)

Dahm, Molly J.; Samonte, Aurelia V.; Shows, Amy R.

2009-01-01

Objective: The purpose of this study was to determine whether student awareness and attitudes about organic foods would predict their behaviors with regard to organic food consumption and other healthy lifestyle practices. A secondary purpose was to determine whether attitudes about similar eco-friendly practices would result in socially conscious…

The most common friend first immunization

International Nuclear Information System (INIS)

Nian Fu-Zhong; Hu Cha-Sheng

2016-01-01

In this paper, a standard susceptible-infected-recovered-susceptible(SIRS) epidemic model based on the Watts–Strogatz (WS) small-world network model and the Barabsi–Albert (BA) scale-free network model is established, and a new immunization scheme — “the most common friend first immunization” is proposed, in which the most common friend’s node is described as being the first immune on the second layer protection of complex networks. The propagation situations of three different immunization schemes — random immunization, high-risk immunization, and the most common friend first immunization are studied. At the same time, the dynamic behaviors are also studied on the WS small-world and the BA scale-free network. Moreover, the analytic and simulated results indicate that the immune effect of the most common friend first immunization is better than random immunization, but slightly worse than high-risk immunization. However, high-risk immunization still has some limitations. For example, it is difficult to accurately define who a direct neighbor in the life is. Compared with the traditional immunization strategies having some shortcomings, the most common friend first immunization is effective, and it is nicely consistent with the actual situation. (paper)

When Do Friends Prevent Friends from Hooking Up Intoxicated? An Examination of Sex Differences and Hypothetical Intoxication in Peer Interventions.

Science.gov (United States)

Savage, Matthew W; Menegatos, Lisa; Roberto, Anthony J

2017-08-01

Despite the risks involved when mixing alcohol with casual sexual activity, the majority of college students engage in hookups, and the majority of those hookups involve alcohol. This study focused on the protective role college students' peers can play and the situational factors that might influence their willingness to intervene when a close friend is about to hook up intoxicated. Drawing on the theory of planned behavior (TPB), this study investigated differences in students' (N = 1270) attitudes, norms, perceived behavioral control, and intentions to persuade a close friend not to engage in a hypothetical drunken hookup using a 2 (friend sex) × 2 (participant sex) × 2 (sober/intoxicated) factorial design. Results indicated significant differences in the TPB variables. Participants intended to intervene with female friends, but not male friends, and women were more likely to intervene than men. Participants in the sober condition had stronger intentions to intervene than those in the intoxicated condition, but this effect was driven by increases in men's intentions when sober. Implications for theory and prevention programming are discussed.

A proposed tool to integrate environmental and economical assessments of products

International Nuclear Information System (INIS)

Senthil, Kumaran D.; Ong, S.K.; Nee, A.Y.C.; Tan, Reginald B.H.

2003-01-01

An attempt has been made to interpret the outcomes of a Life Cycle Assessment (LCA) in terms of environmental costs. This attempt ensures the environmental accountability of the products while LCA ensures their eco-friendly nature. Keeping this as an objective, a Life Cycle Environmental Cost Analysis (LCECA) model was developed. This new tool incorporates costing into the LCA practice. This model prescribes a life cycle environmental cost model to estimate and correlate the effects of these costs in all the life cycle stages of the product. The newly developed categories of eco-costs are: costs of effluent treatment/control/disposal, environmental management systems, eco-taxes, rehabilitation, energy and savings of recycling and reuse strategies. The mathematical model of LCECA determines quantitative expressions between the total cost of products and the various eco-costs. The eco-costs of the alternatives are compared with the computational LCECA model. This method enables the environmental as well as the economic assessment of products, which leads to cost-effective, eco-friendly design of products

77 FR 39320 - Suggestions for Environmental Cooperation Pursuant to the United States-Singapore Memorandum of...

Science.gov (United States)

2012-07-02

... friendly environmental technology and pollution management techniques; (2) participating in regional... DEPARTMENT OF STATE [Public Notice 7943] Suggestions for Environmental Cooperation Pursuant to the United States-Singapore Memorandum of Intent on Environmental Cooperation AGENCY: Department of State...

An Empirical Test of Self-Determination Theory as a Guide to Fostering Environmental Motivation

Science.gov (United States)

Darner, Rebekka

2012-01-01

A goal of most environmental education is to motivate students toward environmentally friendly behaviour change. This article describes a study that elucidates how such motivation can be fostered in the classroom. It compared students' development of environmental motivation in a conventional post-secondary environmental biology course and a…

Global environmental technologies in the future

International Nuclear Information System (INIS)

Takahashi, M.

1994-01-01

This paper outlines the activities of New Energy and industrial Technology Development Organization's (NEDO) 'Research and Development of Industrial Technology' projects which are related to global environmental technologies. Then, it describes four new material programs and two biotechnology ones, and presents a list of a few environmentally-friendly technologies. These national projects are carried out by private companies which are consigned by NEDO in conformity with MITI's fundamental Research and Development policy. (TEC)

Photonic crystals: emerging biosensors and their promise for point-of-care applications.

Science.gov (United States)

Inan, Hakan; Poyraz, Muhammet; Inci, Fatih; Lifson, Mark A; Baday, Murat; Cunningham, Brian T; Demirci, Utkan

2017-01-23

Biosensors are extensively employed for diagnosing a broad array of diseases and disorders in clinical settings worldwide. The implementation of biosensors at the point-of-care (POC), such as at primary clinics or the bedside, faces impediments because they may require highly trained personnel, have long assay times, large sizes, and high instrumental cost. Thus, there exists a need to develop inexpensive, reliable, user-friendly, and compact biosensing systems at the POC. Biosensors incorporated with photonic crystal (PC) structures hold promise to address many of the aforementioned challenges facing the development of new POC diagnostics. Currently, PC-based biosensors have been employed for detecting a variety of biotargets, such as cells, pathogens, proteins, antibodies, and nucleic acids, with high efficiency and selectivity. In this review, we provide a broad overview of PCs by explaining their structures, fabrication techniques, and sensing principles. Furthermore, we discuss recent applications of PC-based biosensors incorporated with emerging technologies, including telemedicine, flexible and wearable sensing, smart materials and metamaterials. Finally, we discuss current challenges associated with existing biosensors, and provide an outlook for PC-based biosensors and their promise at the POC.

Environmental Governance as a Model of Environmental Management

Directory of Open Access Journals (Sweden)

Budi Kristianto

2016-02-01

Full Text Available The concept of environmental governance does not promise practical solutions and provides short guidance in solving intertwined environmental problems in Indonesia. But at least environmental concept is useful when we try to realize environmental management in Indonesia currently. The worst is that the mistake has become routine manifesting in pragmatism in environmental management. Before it all too late, it is better that we keep in mind a German proverb in the beginning of this writing, which more or less, means “ we do not know what the future brings, but we know that we should act.”

Psychosocial and Environmental Correlates of Sedentary Behaviors in Spanish Children

Directory of Open Access Journals (Sweden)

S. Aznar

2017-01-01

Full Text Available Purpose. To evaluate children’s psychosocial and environmental factors associated with sedentary behavior (SB. Method. The study involved a total of 420 children (mean 9.2 years; 52.9% girls from the community of Madrid, Spain. SB and physical activity (PA were objectively measured using accelerometers. TV viewing and potential correlates were assessed by questionnaire. Mixed-model regression analysis, adjusted for clustering within school locations, evaluated the relation of each independent variable with SBs. Results. Girls showed higher levels of SB than boys, whereas boys reported more TV viewing (p<.001 in all cases. Regression analysis showed that MVPA levels were negatively related to objective SB measurement in both boys and girls (p<.001. Parent and friend support to PA were negatively associated with SB on weekdays in boys and girls, respectively (p<.05. In the boys’ group, parental professional level was a positive predictor of SB on weekend days (p=.011. Boys with more positive neighborhood perceptions spent less time watching TV (p<.001, whereas mother’s leisure-time PA level was a negative correlate of TV viewing in girls’ group (p<.01. Conclusion. Different psychosocial and environmental correlates of SB were identified. Present findings are promising targets for interventions to improve children’s health.

An evidential reasoning-based AHP approach for the selection of environmentally-friendly designs

Energy Technology Data Exchange (ETDEWEB)

NG, C.Y., E-mail: ng.cy@cityu.edu.hk

2016-11-15

Due to the stringent environmental regulatory requirements being imposed by cross-national bodies in recent years, manufacturers have to minimize the environmental impact of their products. Among those environmental impact evaluation tools available, Life Cycle Assessment (LCA) is often employed to quantify the product's environmental impact throughout its entire life cycle. However, owing to the requirements of expert knowledge in environmental science and vast effort for data collection in carrying out LCA, as well as the common absence of complete product information during product development processes, there is a need to develop a more suitable tool for product designers. An evidential reasoning-based approach, which aims at providing a fast-track method to perform design alternative evaluations for non-LCA experts, is therefore introduced as a new initiative to deal with the incomplete or uncertain information. The proposed approach also enables decision makers to quantitatively assess the life cycle phases and design alternatives by comparing their potential environmental impacts, thus effectively and efficiently facilitates the identification of greener designs. A case application is carried out to demonstrate the applicability of the proposed approach.

PRO-ENVIRONMENTAL BEHAVIORS IN THE HOUSEHOLD AND HOLIDAY SETTING. AN EXPLORATORY STUDY AMONG BRASOV CITIZENS

Directory of Open Access Journals (Sweden)

ELENA-NICOLETA Untaru

2015-06-01

Full Text Available The present paper aims to investigate Brasov citizens’ pro-environmental behavior both in their household and holiday setting. In this sense, we conducted a qualitative research using the in-depth interview method on a 13 respondent sample which included self-declared environmentally friendly residents from the city of Brasov, Romania. Among them, six respondents are members of ecological NGOs and can be considered environmental activists. The interview guide was structured in two sections. First, we considered respondents' pro-environmental behaviors, the description of their activities, aimed at protecting the environment, as well as the tools and resources developed by public authorities in order to facilitate and stimulate citizens’ involvement in environmental protection. The second section was focused on the description of respondents’ last holiday, the choice of tourism destination, transportation, accommodation unit and activities in the destination; respondents’ pro-environmental behaviors; and the tools and instruments developed by local public authorities or hoteliers in order to facilitate tourists’ environmentally friendly behavior. The results of the present study outline the fact that respondents’ involvement in environmentally friendly activities is identical, or almost identical, in both household and holiday setting. For the environmental activists, such a behavior is difficult to change, even in a holiday setting, where environmental protection is one the individuals ‘priority’. The outcomes of our research can be used by both tourist services providers in order to adapt their offer to consumers’ pro-environmental behavior and local authorities who can identify the actions which have to be undertaken in order to facilitate such behavior.

Eco-Friendly Multipurpose Lubricating Greases from Vegetable Residual Oils

Directory of Open Access Journals (Sweden)

Ponnekanti Nagendramma

2015-10-01

Full Text Available Environmentally friendly multipurpose grease formulation has been synthesized by using Jatropha vegetable residual oil with lithium soap and multifunctional additive. The thus obtained formulation was evaluated for its tribological performance on a four-ball tribo-tester. The anti-friction and anti-wear performance characteristics were evaluated using standard test methods. The biodegradability and toxicity of the base oil was assessed. The results indicate that the synthesized residual oil grease formulation shows superior tribological performance when compared to the commercial grease. On the basis of physico-chemical characterization and tribological performance the vegetable residual oil was found to have good potential for use as biodegradable multipurpose lubricating grease. In addition, the base oils are biodegradable and non toxic.

Towards eco-friendly crop protection: natural deep eutectic solvents and defensive secondary metabolites.

Science.gov (United States)

Mouden, Sanae; Klinkhamer, Peter G L; Choi, Young Hae; Leiss, Kirsten A

2017-01-01

With mounting concerns over health and environmental effects of pesticides, the search for environmentally acceptable substitutes has amplified. Plant secondary metabolites appear in the horizon as an attractive solution for green crop protection. This paper reviews the need for changes in the techniques and compounds that, until recently, have been the mainstay for dealing with pest insects. Here we describe and discuss main strategies for selecting plant-derived metabolites as candidates for sustainable agriculture. The second part surveys ten important insecticidal compounds, with special emphasis on those involved in human health. Many of these insecticidal metabolites, however, are crystalline solids with limited solubility which might potentially hamper commercial formulation. As such, we introduce the concept of natural deep eutectic solvents for enhancing solubility and stability of such compounds. The concept, principles and examples of green pest control discussed here offer a new suite of environmental-friendly tools designed to promote and adopt sustainable agriculture.

The Environmental Gains of Remanufacturing: Evidence from the Computer and Mobile Industry

NARCIS (Netherlands)

J. Quariguasi Frota Neto (João); J.M. Bloemhof-Ruwaard (Jacqueline)

2009-01-01

textabstractRemanufacturing has long been perceived as an environmentally-friendly initiative. The question of how remanufacturing moderates the relation between environmental impact and economic returns is still unanswered, however. In this paper, we focus our attention on the electronics industry.

Hydrogel-coated feed spacers in two-phase flow cleaning in spiral wound membrane elements: A novel platform for eco-friendly biofouling mitigation

NARCIS (Netherlands)

Wibisono, Y.; Yandi, Wetra; Golabi, Mohsen; Nugraha, Roni; Cornelissen, Emile R.; Kemperman, Antonius J.B.; Ederth, Thomas; Nijmeijer, Dorothea C.

2015-01-01

Biofouling is still a major challenge in the application of nanofiltration and reverse osmosis membranes. Here we present a platform approach for environmentally friendly biofouling control using a combination of a hydrogel-coated feed spacer and two-phase flow cleaning. Neutral

5th Conference on Aerospace Materials, Processes, and Environmental Technology

Science.gov (United States)

Cook, M. B. (Editor); Stanley, D. Cross (Editor)

2003-01-01

Records are presented from the 5th Conference on Aerospace Materials, Processes, and Environmental Technology. Topics included pollution prevention, inspection methods, advanced materials, aerospace materials and technical standards,materials testing and evaluation, advanced manufacturing,development in metallic processes, synthesis of nanomaterials, composite cryotank processing, environmentally friendly cleaning, and poster sessions.

Influence of Friends on Children’s Physical Activity: A Review

Science.gov (United States)

Maturo, Claire C.

2013-01-01

We examined evidence for friendship influences on children's physical activity (PA) through systematic searches of online databases in May 2012. We identified 106 studies (25 qualitative) published in English since 2000 that analyzed indicators of friendship influences (e.g., communication about PA, friends’ PA, and PA with friends) among persons younger than 19 years. Children's PA was positively associated with encouragement from friends (43 of 55 studies indicating a positive relationship), friends' own PA (30/35), and engagement with friends in PA (9/10). These findings are consistent with friends influencing PA, but most studies did not isolate influence from other factors that could explain similarity. Understanding friendship influences in childhood can facilitate the promotion of lifelong healthy habits. PA with friends should be considered in health promotion programs. PMID:23678914

Ecological-friendly pigments from fungi.

Science.gov (United States)

Durán, Nelson; Teixeira, Maria F S; De Conti, Roseli; Esposito, Elisa

2002-01-01

The dyestuff industry is suffering from the increases in costs of feedstock and energy for dye synthesis, and they are under increasing pressure to minimize the damage to the environment. The industries are continuously looking for cheaper, more environmentally friendly routes to existing dyes. The aim of this minireview is to discuss the most important advances in the fungal pigment area and its interest in biotechnological applications. Characteristic pigments are produced by a wide variety of fungi and the chemical composition of natural dyes are described. These pigments exhibit several biological activities besides cytotoxicity. The synthetic pigments authorized by the EC and in USA and the natural pigments available in the world market are discussed. The obstacle to the exploitation of new natural pigments sources is the food legislation, requesting costly toxicological research, manufacturing costs, and acceptance by consumers. The dislike for novel ingredients is likely to be the biggest impediment for expansion of the pigment list in the near future. If the necessary toxicological testing and the comparison with accepted pigments are made, the fungal pigments, could be acceptable by the current consumer. The potentiality of pigment production in Brazil is possible due to tremendous Amazonian region biodiversity.

Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (survey of the coal utilization in Pakistan); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Pakistan ni okeru sekitan riyo gaikyo chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper made a literature survey, hearing survey, site survey/study on the coal in Pakistan such as the coal utilization system and the environmental situation, etc., and aimed at pre-examination for the survey of the introduction of the environmentally friendly type coal utilization system to be planned in Pakistan in the future. The examination, data collection and preparation were conducted in terms of the following items: the structure of coal consumption in energy supply, structure of coal consumption, mainly of domestic brown coal consumption, the situation of coal utilization by industry and by region, environmental problems caused by coal utilization such as air pollution, the trend of policies of environmental regulation, etc. The literature on the following was obtained and surveyed: the situation of economy/energy in Pakistan, coal utilization technology by industrial field, and environmental protection technology. The hearing survey was made to institutions concerned, corporation groups and men of learning and experience. Site surveys were conducted for the typically selected coal utilization equipment and existing environmental protection equipment. 66 figs., 56 tabs.

Effects of baby-friendly hospital initiative on breast-feeding practices in Sindh

International Nuclear Information System (INIS)

Khan, M.; Akram, D.S.

2013-01-01

To determine changes in the breastfeeding practices of mothers after receiving counseling on Ten Steps to Successful Breastfeeding as defined by the Baby Friendly Hospital Initiative comparing baby friendly hospitals (BFHs) and non-baby-friendly hospitals in Sindh, Pakistan. Methods: The observational study was conducted from June 2007 to June 2009 in randomly selected baby-friendly and non-baby-friendly hospitals of Sindh, Pakistan. Non-probability purposive sampling was employed. The maternity staff was trained on Ten Steps to Successful Breastfeeding. The changes in breastfeeding practices were analysed by SPSS version 15. Results: A total of 236 women were included in the study. Of them, 196 (83.05%) were from baby-friendly hospitals and 40 (16.94%) from non-baby-friendly hospitals. Besides, 174 (88.7%) mothers in baby-friendly hospitals and 5 (12.5%) in non-baby-friendly hospitals during antenatal care received counseling by healthcare providers. There was an increase in breastfeeding practice up to 194 (98.97%) in the first category compared to 12 (30%) in the other category. Conclusion: Counseling under the Baby Friendly Hospital Initiative improved breastfeeding practices up to 98.97% in baby-friendly compared to non-baby-friendly hospitals. (author)

Parents and friends both matter: simultaneous and interactive influences of parents and friends on European schoolchildren's energy balance-related behaviours - the ENERGY cross-sectional study.

Science.gov (United States)

te Velde, Saskia J; ChinAPaw, Mai J M; De Bourdeaudhuij, Ilse; Bere, Elling; Maes, Lea; Moreno, Luis; Jan, Nataša; Kovacs, Eva; Manios, Yannis; Brug, Johannes

2014-07-08

The family, and parents in particular, are considered the most important influencers regarding children's energy-balance related behaviours (EBRBs). When children become older and gain more behavioural autonomy regarding different behaviours, the parental influences may become less important and peer influences may gain importance. Therefore the current study aims to investigate simultaneous and interactive associations of family rules, parent and friend norms and modelling with soft drink intake, TV viewing, daily breakfast consumption and sport participation among schoolchildren across Europe. A school-based cross-sectional survey in eight countries across Europe among 10-12 year old schoolchildren. Child questionnaires were used to assess EBRBs (soft drink intake, TV viewing, breakfast consumption, sport participation), and potential determinants of these behaviours as perceived by the child, including family rules, parental and friend norms and modelling. Linear and logistic regression analyses (n = 7811) were applied to study the association of parental (norms, modelling and rules) and friend influences (norm and modelling) with the EBRBs. In addition, potential moderating effects of parental influences on the associations of friend influences with the EBRBs were studied by including interaction terms. Children reported more unfavourable friend norms and modelling regarding soft drink intake and TV viewing, while they reported more favourable friend and parental norms and modelling for breakfast consumption and physical activity. Perceived friend and parental norms and modelling were significantly positively associated with soft drink intake, breakfast consumption, physical activity (only modelling) and TV time. Across the different behaviours, ten significant interactions between parental and friend influencing variables were found and suggested a weaker association of friend norms and modelling when rules were in place. Parental and friends norm and

Norway's centres for environment-friendly energy research (CEERs)

Energy Technology Data Exchange (ETDEWEB)

2009-07-01

In February 2009 Norway's Minister of Petroleum and Energy announced the establishment of eight new Centres for Environment-friendly Energy Research (CEERs). The centres form national teams within the areas of offshore wind energy, solar energy, energy efficiency, bio energy, energy planning and design, and carbon capture and storage. These centres are: BIGCCS Centre - International CCS Research Centre; Centre for Environmental Design of Renewable Energy (CEDREN); Bioenergy Innovation Centre (CenBio); Norwegian Centre for Offshore Wind Energy (NORCOW E); Norwegian Research Centre for Offshore Wind Technology (NOWITECH); The Norwegian Research Centre for Solar Cell Technology; SUbsurface CO{sub 2} storage - Critical Elements and Superior Strategy (SUCCESS) The Research Centre on Zero Emission Buildings - ZEB (AG)

Lipedema: friend and foe.

Science.gov (United States)

Torre, Yanira Sanchez-De la; Wadeea, Rita; Rosas, Victoria; Herbst, Karen L

2018-03-09

Background Lipedema is a chronic disorder presenting in women during puberty or other times of hormonal change such as childbirth or menopause, characterized by symmetric enlargement of nodular, painful subcutaneous adipose tissue (fat) in the limbs, sparing the hands, feet and trunk. Healthcare providers underdiagnose or misdiagnose lipedema as obesity or lymphedema. Materials and methods The benefits (friend) and negative aspects (foe) of lipedema were collected from published literature, discussions with women with lipedema, and institutional review board approved evaluation of medical charts of 46 women with lipedema. Results Lipedema is a foe because lifestyle change does not reduce lipedema fat, the fat is painful, can become obese, causes gait and joint abnormalities, fatigue, lymphedema and psychosocial distress. Hypermobility associated with lipedema can exacerbate joint disease and aortic disease. In contrast, lipedema fat can be a friend as it is associated with relative reductions in obesity-related metabolic dysfunction. In new data collected, lipedema was associated with a low risk of diabetes (2%), dyslipidemia (11.7%) and hypertension (13%) despite an obese average body mass index (BMI) of 35.3 ± 1.7 kg/m2. Conclusion Lipedema is a painful psychologically distressing fat disorder, more foe than friend especially due to associated obesity and lymphedema. More controlled studies are needed to study the mechanisms and treatments for lipedema.

Fermilab Friends for Science Education | Contact Us

Science.gov (United States)

Fermilab Friends for Science Education FFSE Home About Us Join Us Support Us Contact Us Contact Us Science Education P.O Box 500, MS 777 Batavia, IL 60510-5011 (630) 840-3094 * fax: (630) 840-2500 E-mail : Membership Send all other communications to: Susan Dahl, President Fermilab Friends for Science Education Box

Does it matter what friends think, say, or do? The role of friends' smoking attitudes and behavior for Dutch adolescents' smoking behavior.

Science.gov (United States)

Huisman, Chip

2014-05-01

Using stochastic actor-based models for longitudinal network analysis, this study examines the role of friends' smoking attitudes and behavior for Dutch adolescents' smoking behavior in four secondary schools (N = 875). The data were collected in two waves in two small suburban towns under second graders in 2008 to 2009 by means of a standardized questionnaire. Stochastic actor-based models for longitudinal network analysis can control for friendship selection while examining the effect of friends' attitudes and smoking behavior on the smoking behavior of a student. The findings suggest that friends tend to select each other on similar smoking behavior. Influence of friends' smoking behavior seems to play no role. In one school, an effect of friends' attitudes towards smoking on the smoking behavior is found. The implications for future research are to consider attitudes when examining the influence of friendship network on smoking behavior. The main limitation of this study lies in the limited sample, which makes generalizations to the general population difficult.

Green Nudging

OpenAIRE

Evans, Nicholas; Eickers, Stephanie; Geene, Leonie; Todorovic, Marijana; Villmow, Annika; Forschungsstelle für Umweltpolitik (FFU), Freie Universität Berlin

2018-01-01

Traditional environmental policy instruments have not always proven successful in fostering environmentally friendly behaviour. The question remains: how can policymakers tackle the attitude-behaviour gap when it comes to pro-environmental choices and sustainable lifestyles? One solution that has emerged is green nudging, a new and potentially promising policy tool born of behavioural economics and experimental psychology. This paper contributes to the current discussion surrounding green nud...

Influence of the conditions of a solid-state synthesis anode material ...

Indian Academy of Sciences (India)

2018-02-02

Feb 2, 2018 ... Abstract. Lithium–titanium spinel is a promising electrode material for high power and environmentally friendly batteries. .... electrolyte and increases the availability of Li4Ti5O12 towards lithium ions. ... container. The milling ...

Magnesium-Based Corrosion Nano-Cells For Reductive Transformation Of Contaminants

Science.gov (United States)

Magnesium, with its potential to reduce a variety of aqueous contaminants, unique self-limiting corrosion behavior affording long active life times, natural abundance, low cost, and environmentally friendly nature, promises to be an effective technology. However, nanoparticles o...

The demand for environmentally friendly packaging in Germany

DEFF Research Database (Denmark)

Thøgersen, John

1996-01-01

. First, buying behaviour was observed and salient reasons for the choice were registered. Secondly, respondents were interviewed in-depth in order to uncover all attributes that mattered to them, and the why. Thirdly, the relative importance of a few of the crucial attributes for buying intentions....... A person always buying the same brand and variety need not consider every aspect of the purchase. Hence, the non-salience of environmental packaging attributes and the non-concerned buying can partly be explained by habitual shopping. 6. The in-depth interview showed that many more attributes than were...... salient in the shopping situation influence the value of a cream cheese to the consumer. The point of departure of the in-depth interviews was a triadic sorting of four varieties of cre cheese with highly different packaging, among which was one of glass. The clear differentiation between packaging types...

Parental Strategies for Knowledge of Adolescents’ Friends: Distinct from Monitoring?

Science.gov (United States)

Miller, Brenda A.; Duke, Michael R.; Ames, Genevieve M.

2012-01-01

Parental monitoring is defined as a set of behaviors used to gain knowledge about an adolescent’s whereabouts, friends and associates, and activities. However, can knowledge of adolescents’ whereabouts/activities, and friends all be attained through the same strategies? Or do they require their own strategies? This study used qualitative interviews with 173 parents of older adolescents from 100 families. Emergent themes described strategies by which parents gain information about their adolescents’ friends and the substance use of those friends. The strategies included direct interaction with the friend, gaining information from the teen, using second-hand sources, and making assumptions. Some of these strategies were consistent with previous research, while others raise new questions and provide interesting new directions to pursue. Primarily, additional consideration needs to be given to assessments of parental monitoring that include strategies for gaining knowledge of adolescents’ friends and their substance use. PMID:23209361

[Does self-worth mediate the effects of socio-environmental experiences on depression among fifth and sixth grade students?].

Science.gov (United States)

Nishino, Yasuyo; Kobayashi, Sachiko; Kitagawa, Tomoko

2009-08-01

This study investigated self-worth as a mediator between socio-environmental experiences and depression. A sample of 255 fifth and sixth grade students completed self-report questionnaires assessing self-worth, depression, and socio-environmental experiences of social support and stressors. Data for both males and females showed a direct effect of "friend support" on depression. However, for males, but not females, self-worth also mediated the influence of "friend support" on depression.

The Impact of Disclosure of Intimate Partner Violence on Friends.

Science.gov (United States)

Sigurvinsdottir, Rannveig; Riger, Stephanie; Ullman, Sarah E

2016-11-01

Intimate partner violence (IPV) affects people connected to survivors as well as survivors themselves. Despite this, we do not have measures assessing IPV's impact on others. The Impact on Friends measure was developed to understand the impact of disclosure of sexual assault (SA) on friends of survivors. In the present study, the Impact on Friends measure was modified to apply to IPV and administered to two separate online samples. Exploratory factor analysis in one sample (U.S.-based participants) revealed a very similar factor structure to the original Impact on Friends measure, consisting of Emotional Distress, Validation, and Confusion. This factor solution was then applied to the next sample (mostly Indian participants), resulting in an adequate model fit. The Impact on Friends-IPV measure has adequate reliability. One of its factors, Emotional Distress, is related to increased depression and post-traumatic distress disorder symptoms of friends, but only in the U.S. These findings suggest that even though the same dimensions have been found in both a U.S. and an Indian sample, how disclosure of IPV on friends relates to psychological symptoms may differ. This study suggest that there is at least some overlap in the experiences of friends of IPV and SA survivors, but that certain dimensions of the measure may have different relationships to other phenomena in different cultures. © The Author(s) 2015.

Novel environment friendly corrosion inhibitor pigments based on naturally occurring clay minerals

Energy Technology Data Exchange (ETDEWEB)

Bohm, S.; McMurray, H.N.; Worsley, D.A. [University of Wales, Swansea (United Kingdom). Dept. of Materials Engineering; Powell, S.M. [University of Wales, Swansea (United Kingdom). Engineering Doktorate Centre

2001-12-01

Novel, ceramic, corrosion inhibitor pigments consisting of cerium (III) and calcium (II) cation exchanged bentonites have been shown to provide effective cut-edge corrosion resistance in organic coated galvanised steel. The bentonite pigments were prepared from a naturally occurring (Wyoming) bentonite with a cation-exchange-capacity of 0.7 milli-equivalents per gram. Cation exchange was carried out by repeated washing with aqueous solutions of cerium (III) chloride and calcium (II) chloride to produce bentonites containing 31500 ppm exchangeable cerium (III) and 13500 ppm exchangeable calcium (II) respectively. The resulting bentonite pigments were dispersed in a polyester-resin based primer paint system to give a pigment volume concentration of 19%. For comparison, two similar primer systems were prepared containing a commercial calcium (II) exchanged silica pigment Shieldex: 60 000 ppm calcium (II) and a strontium chromate dispersion, both with a 19% pigment volume concentration. All three primer systems were applied (5 {mu}m) to the zinc surface of galvanised 0.7 mm gauge sheet steel and overcoated with an architectural polyester topcoat (18 {mu}m). The performance of the inhibitor pigments was compared by measuring the rate of corrosion-driven organic coating delamination from the cut edge of samples during 1000 h of salt-spray testing. The calcium (II) bentonite pigment exhibited an anti-delamination performance similar to that of strontium chromate but superior to that of Shieldex. However, the cerium (III) bentonite pigment was superior in performance to both strontium chromate and Shieldex. Thus, the bentonite pigments represent promising, environmentally friendly, ion-exchange corrosion inhibitors which exhibit good anti-delamination performance by comparison with current commercial systems. (orig.)

Network-Friendly Gossiping

Science.gov (United States)

Serbu, Sabina; Rivière, Étienne; Felber, Pascal

The emergence of large-scale distributed applications based on many-to-many communication models, e.g., broadcast and decentralized group communication, has an important impact on the underlying layers, notably the Internet routing infrastructure. To make an effective use of network resources, protocols should both limit the stress (amount of messages) on each infrastructure entity like routers and links, and balance as much as possible the load in the network. Most protocols use application-level metrics such as delays to improve efficiency of content dissemination or routing, but the extend to which such application-centric optimizations help reduce and balance the load imposed to the infrastructure is unclear. In this paper, we elaborate on the design of such network-friendly protocols and associated metrics. More specifically, we investigate random-based gossip dissemination. We propose and evaluate different ways of making this representative protocol network-friendly while keeping its desirable properties (robustness and low delays). Simulations of the proposed methods using synthetic and real network topologies convey and compare their abilities to reduce and balance the load while keeping good performance.

Hybrid LCA model for assessing the embodied environmental impacts of buildings in South Korea

International Nuclear Information System (INIS)

Jang, Minho; Hong, Taehoon; Ji, Changyoon

2015-01-01

The assessment of the embodied environmental impacts of buildings can help decision-makers plan environment-friendly buildings and reduce environmental impacts. For a more comprehensive assessment of the embodied environmental impacts of buildings, a hybrid life cycle assessment model was developed in this study. The developed model can assess the embodied environmental impacts (global warming, ozone layer depletion, acidification, eutrophication, photochemical ozone creation, abiotic depletion, and human toxicity) generated directly and indirectly in the material manufacturing, transportation, and construction phases. To demonstrate the application and validity of the developed model, the environmental impacts of an elementary school building were assessed using the developed model and compared with the results of a previous model used in a case study. The embodied environmental impacts from the previous model were lower than those from the developed model by 4.6–25.2%. Particularly, human toxicity potential (13 kg C 6 H 6 eq.) calculated by the previous model was much lower (1965 kg C 6 H 6 eq.) than what was calculated by the developed model. The results indicated that the developed model can quantify the embodied environmental impacts of buildings more comprehensively, and can be used by decision-makers as a tool for selecting environment-friendly buildings. - Highlights: • The model was developed to assess the embodied environmental impacts of buildings. • The model evaluates GWP, ODP, AP, EP, POCP, ADP, and HTP as environmental impacts. • The model presents more comprehensive results than the previous model by 4.6–100%. • The model can present the HTP of buildings, which the previous models cannot do. • Decision-makers can use the model for selecting environment-friendly buildings

The Effect of Explicit Environmentally Oriented Metacognitive Guidance and Peer Collaboration on Students' Expressions of Environmental Literacy

Science.gov (United States)

Adler, Idit; Zion, Michal; Mevarech, Zemira R.

2016-01-01

The prevalence of habitat and life-threatening environmental problems has motivated environmental researchers to develop education programs to strengthen students' environmental literacy. We argue that the connection between environmental literacy and metacognition is theoretically promising. Therefore, we developed the "Meta-CIC" model,…

An Environmentally Friendly, Cost-Effective Determination of Lead in Environmental Samples Using Anodic Stripping Voltammetry

Science.gov (United States)

Goldcamp, Michael J.; Underwood, Melinda N.; Cloud, Joshua L.; Harshman, Sean

2008-01-01

Contamination of the environment with heavy metals such as lead presents many health risks. Simple, effective, and field-portable methods for the measurement of toxic metals in environmental samples are vital tools for evaluating the risks that these contaminants pose. This article describes the use of new developments in anodic stripping…

Environmentally friendly properties of vegetable oil methyl esters

Directory of Open Access Journals (Sweden)

Gateau Paul

2005-07-01

Full Text Available Measurements were carried out on Vegetable Oil Methyl Esters (VOME or FAME answering the most recent specifications. The products tested are RME (Rapeseed oil Methyl Ester, ERME (Erucic Rapeseed oil Methyl Esters, SME (Sunflower oil Methyl Esters, and HOSME (High Oleic Sunflower oil Methyl Esters. They contain more than 99.5% of fatty acid mono esters. The compositions are given. VOME are not volatile and they are not easily flammable. They are not soluble in water and they are biodegradable. According to the methods implemented for the determination of the German classification of substances hazardous to waters WGK, they are not toxic on mammals and unlike diesel fuel they are not toxic on fish, daphnia, algae and bacteria. The RME is not either toxic for shrimps. According to tests on rabbits, RME and SME are not irritating for the skin and the eyes. VOME display particularly attractive environmental properties.

Development of a green supercapacitor composed entirely of environmentally friendly materials.

Science.gov (United States)

Dyatkin, Boris; Presser, Volker; Heon, Min; Lukatskaya, Maria R; Beidaghi, Majid; Gogotsi, Yury

2013-12-01

Owing to recent power- and energy-density advances, higher efficiencies, and almost unlimited lifetimes, electrical double-layer capacitors (EDLCs, also known as supercapacitors) are now used in a wide range of energy harvesting and storage systems, which include portable power and grid applications. Despite offering key performance advantages, many device components pose significant environmental hazards once disposed. They often contain fluorine, sulfur, and cyanide groups, which are harmful if discarded by using conventional landfill or incineration methods, and they are constructed by using multiple metallic parts, which contribute to a high ash content. We explore designs for a fully operational supercapacitor that incorporates materials completely safe to dispose of and easy to incinerate. The components, which include material alternatives for the current collector, electrolyte, separator, particle binder, and packaging, are all mutually compatible, and most of them exhibit better performance than commonly used materials. We selected a graphite foil as current collector, sodium acetate as electrolyte, an ester as porous membrane based on acetate cellulose, and polymers based on polyvinyl alcohol as environmentally benign solutions for device components. The presented materials all originate from simple and inexpensive source compounds, which decreases the environmental impact of their manufacture and renders them more viable for integration into commercial devices for large-scale stationary and transportation energy storage applications. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Global climate-friendly trade : Canada's chance to clean up

International Nuclear Information System (INIS)

Goldfarb, D.

2010-03-01

This paper discussed the global trade and investment in climate-friendly technologies, Canada's current position in this market, and the policy changes that are necessary for Canadian businesses to gain a stronger foothold in this sector. The global market for climate-friendly technologies is growing rapidly, but Canadian businesses have generally failed to exploit opportunities to export climate-friendly technologies and have generally lagged other countries in adopting such technologies developed elsewhere. Although Canadian businesses generally underperform in this sector, Canada does have notable strengths in 13 identified areas, including waste management technologies, energy technologies, and in parts of the value chains associated with wind and solar power. Targeting these areas of relative strength for further development could position Canada as a global leader in some climate-friendly technologies. For this to happen, Canadian governments need to establish clear policies, invest in research and development, and remove domestic and international barriers to the development and trade in climate-friendly technologies. 30 refs., 5 tabs., 5 figs.

Low-cost, environmentally friendly route for producing CFRP laminates with microfibrillated cellulose interphase

Directory of Open Access Journals (Sweden)

B. E. B. Uribe

2017-01-01

Full Text Available In this paper, a cost-effective and eco-friendly method to improve mechanical performance in continuous carbon fiber-reinforced polymer (CFRP matrix composites is presented. Unsized fiber fabric preforms are coated with self-assembling sugarcane bagasse microfibrillated cellulose, and undergo vacuum-assisted liquid epoxy resin infusion to produce solid laminates after curing at ambient temperature. Quasi-static tensile, flexural and short beam testing at room temperature indicated that the stiffness, ultimate strength and toughness at ultimate load of the brand-new two-level hierarchical composite are substantially higher than in baseline, unsized fiber-reinforced epoxy laminate. Atomic force microscopy for height and phase imaging, along with scanning electron microscopy for the fracture surface survey, revealed a 400 nm-thick fiber/matrix interphase wherein microfibrillated cellulose exerts strengthening and toughening roles in the hybrid laminate. Market expansion of this class of continuous fiber-reinforced-polymer matrix composites exhibiting remarkable mechanical performance/cost ratios is thus conceivable.

Getting to Family-Friendly in Your Department

Science.gov (United States)

Pilachowski, Catherine A.

2012-01-01

These days, most academic and research institutions recognize the importance of a family-friendly workplace, and have implemented at least some policies to support a sustainable work-life balance: family and medical leave, parental leave, stopping or extending tenure clocks, modified duty policies, breast feeding policies and lactation rooms, partner hiring programs, childcare programs, eldercare programs, emergency and sick child care programs, dependent care travel funds, etc. But while institutions may offer a menu of policies and free or low-cost services to support families, what's happening in your department? Achieving a supportive workplace culture requires that we dispel some of the myths associated with family-friendly policies, and establish that family-friendly policies not only benefit all employees, but also help the institution be more successful.

Exploratory Investigation of Chitosan as Mordant for Eco-Friendly Antibacterial Printing of Cotton with Natural Dyes

OpenAIRE

M. D. Teli; Javed Sheikh; Pragati Shastrakar

2013-01-01

Although a lot of antibacterial finishes are available for cotton, the user safety and durability of the finish are always the important issues. Some of the natural dyes are known to possess antibacterial properties; however, most of them are nonsubstantive. Hence, they are used in conjunction with eco-friendly natural mordants. Although metallic mordants are effective, they are environmentally pollutants, hence not desirable. In the current work, the novel natural mordant like chitosan with ...

Going Green in Business - A Study on the Eco-friendly Initiatives towards Sustainable Development in India

OpenAIRE

Pradeep M. D

2017-01-01

Increasing awareness on the various environmental problems has led to a shift in consumer behaviour. There has been a change in consumer attitude towards a green lifestyle. Thus green Marketing has evolved special implications in the modern market. Green indicates purity through quality, fairness in price and worthy in dealings. Green marketing focuses on marketing eco-friendly products to satisfy the needs and wants of the customers. It adopts innovative techniques of product modification, d...

Potential Usage of Thermoelectric Devices in a HTPEMFC System

DEFF Research Database (Denmark)

Xin, Gao; Chen, Min; Andreasen, Søren Juhl

Methanol fuelled high temperature polymer electrolyte membrane fuel cell (HTPEMFC) power systems are promising as new generation vehicle engines, efficient and environmentally friendly. Currently, they still rely on large Li-ion batteries for system startup. In this paper, the application potential...

Cover Image, Volume 117, Issue 15

DEFF Research Database (Denmark)

da Franca E S C Viegas, Luis Pedro

2017-01-01

Hydrofluoropolyethers are seen as promising environmental friendly third-generation Chlorofluorocarbon replacements in countless applications, with their importance increasing after the ratification of the Kigali Amendment to the Montreal Protocol. In e25381, Viegas presents a DFT/M08-HX benchmark...

Integrating Sustainable Consumption into Environmental Education: A Case Study on Environmental Representations, Decision Making and Intention to Act

Science.gov (United States)

Hadjichambis, Andreas Ch.; Paraskeva-Hadjichambi, Demetra; Ioannou, Hara; Georgiou, Yiannis; Manoli, Constantinos C.

2015-01-01

During the last decades, current consumption patterns have been recurrently blamed for rendering both the environment and our lifestyles unsustainable. Young children are considered a critical group in the effort to make a shift towards sustainable consumption (environmentally friendly consumption). However, young people should be able to consider…

What's in a Friendship? Partner Visibility Supports Cognitive Collaboration between Friends.

Science.gov (United States)

Brennan, Allison A; Enns, James T

2015-01-01

Not all cognitive collaborations are equally effective. We tested whether friendship and communication influenced collaborative efficiency by randomly assigning participants to complete a cognitive task with a friend or non-friend, while visible to their partner or separated by a partition. Collaborative efficiency was indexed by comparing each pair's performance to an optimal individual performance model of the same two people. The outcome was a strong interaction between friendship and partner visibility. Friends collaborated more efficiently than non-friends when visible to one another, but a partition that prevented pair members from seeing one another reduced the collaborative efficiency of friends and non-friends to a similar lower level. Secondary measures suggested that verbal communication differences, but not psychophysiological arousal, contributed to these effects. Analysis of covariance indicated that females contributed more than males to overall levels of collaboration, but that the interaction of friendship and visibility was independent of that effect. These findings highlight the critical role of partner visibility in the collaborative success of friends.

Hydrogel-coated feed spacers in two-phase flow cleaning in spiral wound membrane elements: A novel platform for eco-friendly biofouling mitigation

NARCIS (Netherlands)

Wibisono, Yusuf; Yandi, Wetra; Golabi, Mohsen; Nugraha, Roni; Cornelissen, Emile; Kemperman, A.J.B.; Ederth, Thomas; Nijmeijer, Kitty

2015-01-01

ng is still a major challenge in the application of nanofiltration and reverse osmosis membranes. Here we present a platform approach for environmentally friendly biofouling control using a combination of a Hydrogel-coated feed spacer and two-phase flow cleaning. Neutral (polyHEMA-co-PEG10MA),

Environmental justice in Scotland: policy, pedagogy and praxis

International Nuclear Information System (INIS)

Scandrett, Eurig

2007-01-01

In the first decade of Scottish devolution, environmental justice became a significant component of environmental policy for the Scottish Executive, especially under First Minister Jack McConnell. This paper analyses how a discourse developed within policy narratives which separated environmental justice from economic growth and the interests of capital. In particular, it explores the role which research has played in justifying this discourse. By contrast, an alternative discourse has developed through reflexive and dialogical research associated with the praxis of the environmental organization Friends of the Earth Scotland. This alternative discourse is embedded in the embryonic environmental justice movement in Scotland, and identifies environmental justice as a social conflict which exposes negative externalities at the heart of economic development

Environmental justice in Scotland: policy, pedagogy and praxis

Energy Technology Data Exchange (ETDEWEB)

Scandrett, Eurig [Queen Margaret University, Edinburgh (United Kingdom)

2007-10-15

In the first decade of Scottish devolution, environmental justice became a significant component of environmental policy for the Scottish Executive, especially under First Minister Jack McConnell. This paper analyses how a discourse developed within policy narratives which separated environmental justice from economic growth and the interests of capital. In particular, it explores the role which research has played in justifying this discourse. By contrast, an alternative discourse has developed through reflexive and dialogical research associated with the praxis of the environmental organization Friends of the Earth Scotland. This alternative discourse is embedded in the embryonic environmental justice movement in Scotland, and identifies environmental justice as a social conflict which exposes negative externalities at the heart of economic development.

The Role of the Internet in Shaping Environmental Concern. A Focus on Post-Communist Europe

Directory of Open Access Journals (Sweden)

Laura Nistor

2010-10-01

Full Text Available Common sense, as well as scientific evidence, frequently use the generalization that compared to the citizens of the West, citizens of the ex-communist countries are less environmentally concerned asfar as during the communist past they were not socialized to behave in an environmentally conscious manner and after the regime change were much more concerned with the economical survival than with environmentally responsible attitudes and behaviours. The paper tries to answer the question if new communication technologies, particularly the Internet, can have a decisive role in socializing people towards environmental concern and environmental practices in the postcommunist countries. For this purpose the data set of the Special Eurobarometer 68.2 is used. Analysis shown that in the post-communist member states of the EU Internet use has a significantrole in enhancing people’s environmental concern both in terms of perceived environmental information, environmental attitudes and especially environmentally friendly consumerism. Energy saving behaviours and environmentally friendly travelling behaviours were not, or were less dependent on the Internet use when socio-demographics were controlled. Results suggested that technological flux, understood in terms of broadband Internet penetration, is also a decisive factor in enhancing environmental concern.

Correlates of Objective Social Isolation from Family and Friends among Older Adults.

Science.gov (United States)

Chatters, Linda M; Taylor, Harry Owen; Nicklett, Emily J; Taylor, Robert Joseph

2018-03-03

This study examined the correlates of objective social isolation from extended family members and friends among older adults. The analysis is based on the older adult sub-sample of the National Survey of American Life ( n = 1321). Multinomial logistic regression analyses examined race/ethnicity, demographics, functional health and family and friend network factors as correlates of objective isolation from family and friends. Only 4.47% of respondents were objectively isolated from both their extended family and friends, 10.82% were isolated from their friends, and 7.43% were isolated from their family members. Men were more likely to be objectively isolated from both family and friends and older adults who live with others were significantly more likely to be objectively isolated from their friends. When controlling for subjective social isolation, the two measures of functional health were significantly associated with objective social isolation. In particular, higher levels of self-care impairment decreased the risk of being objectively isolated from friends only, whereas higher mobility impairment was associated with an increased likelihood of being objectively isolated from friends only. Subjective evaluations of social isolation from family and friends were consistently associated with being objectively isolated from family and friends. There were no significant differences between African-Americans, Black Caribbeans and non-Hispanic Whites in objective isolation. These and other findings are discussed in detail.

Correlates of Objective Social Isolation from Family and Friends among Older Adults

Science.gov (United States)

Chatters, Linda M.; Taylor, Harry Owen; Taylor, Robert Joseph

2018-01-01

This study examined the correlates of objective social isolation from extended family members and friends among older adults. The analysis is based on the older adult sub-sample of the National Survey of American Life (n = 1321). Multinomial logistic regression analyses examined race/ethnicity, demographics, functional health and family and friend network factors as correlates of objective isolation from family and friends. Only 4.47% of respondents were objectively isolated from both their extended family and friends, 10.82% were isolated from their friends, and 7.43% were isolated from their family members. Men were more likely to be objectively isolated from both family and friends and older adults who live with others were significantly more likely to be objectively isolated from their friends. When controlling for subjective social isolation, the two measures of functional health were significantly associated with objective social isolation. In particular, higher levels of self-care impairment decreased the risk of being objectively isolated from friends only, whereas higher mobility impairment was associated with an increased likelihood of being objectively isolated from friends only. Subjective evaluations of social isolation from family and friends were consistently associated with being objectively isolated from family and friends. There were no significant differences between African-Americans, Black Caribbeans and non-Hispanic Whites in objective isolation. These and other findings are discussed in detail. PMID:29510504

Causes of Climate and Environmental Changes: The Need for Environmental-Friendly Education Policy in Nigeria

Science.gov (United States)

Nwankwoala, H. N. L.

2015-01-01

Man cannot naturally be detached from his environment. From time to time, changes in climate and environmental conditions occur as a result of natural and human factors. Obviously, the natural factors are almost beyond human control. But, the human factors are to a very large extent under human control. Thus, this paper tried to discover natural…

Proposals for the mitigation of the environmental impact of clinical laboratories.

Science.gov (United States)

Lopez, Joseph B; Badrick, Tony

2012-03-24

Laboratories should be aware of the carbon footprint resulting from their activities and take steps to mitigate it as part of their societal responsibilities. Once committed to a mitigation programme, they should announce an environmental policy, secure the support of senior management, initiate documentation, institute a staff training programme, schedule environmental audits and appoint an environmental manager. Laboratories may aspire to be accredited to one of the standards for environmental management, such as the ISO 14000. As environmental and quality issues are linked, the improvement in the environmental management of an organisation will ultimately lead to improved quality system performance. Indeed, environmental management could conceivably come under overall quality management. Although there will be initial costs, good environmental practices can bring savings. Environmental improvement should be based on the 3R concept to reduce, reuse and recycle. Several policy initiatives may be introduced. These include a green purchasing policy for equipment, laboratory furniture and reagents as well as the management of packaging wastes. There are several ways to reduce energy, water usage and wastage. A reduction of test numbers and collection tubes should be attempted. Paper management involves all aspects of 3R. The recycling of solvents and general wastes should be practised where feasible. The construction new laboratories or renovations to existing ones are opportunities to make them more environmentally-friendly. The advocacy of policies to associates and the inclusion of environmentally-friendly conditions on contractors are integral parts of the programme.

Preparation, characterization and antibacterial effects of eco-friendly ...

African Journals Online (AJOL)

Purpose: To synthesize and characterize eco-friendly gold nanorods (Au-NRs) and to assess their effects against two bacterial strains. Methods: Synthesis of eco-friendly gold nanorods was done from an aqueous solution of chloroauric acid and cetyltrimethylammonium bromide by mixing Olea europaea fruit and Acacia ...

Daily well-being of older adults with friends and family.

Science.gov (United States)

Larson, R; Mannell, R; Zuzanek, J

1986-06-01

Family members are the major source of physical and emotional support for older adults, yet researchers suggest that friendships have a stronger bearing on subjective well-being. In this research we sought an explanation for this inconsistency in older adults' immediate experiences with friends. Retired adults provided self-reports on their subjective states at random moments during a typical week. Analyses of these reports confirmed the prediction that older adults have more favorable experiences with their friends than with family members. The difference is partly attributable to the greater frequency of active leisure activities with friends, but is also due to unique qualities of interactions with friends that facilitate transcendence of mundane daily realities. We propose that friends provide an immediate situation of openness, reciprocity, and positive feedback that engenders enjoyment and subjectively meaningful exchanges.

Perceptions of friendship among youth with distressed friends.

Science.gov (United States)

Hill, Erin N; Swenson, Lance P

2014-02-01

This cross-sectional study examined the relationship between a friend's level of internalizing distress and the focal child's perceptions of friendship amongst 5th, 8th, and 11th grade youth. Participants completed the Youth Self-Report to assess internalizing distress and measures assessing perceptions of friendship quality, social support, and self-disclosure within reciprocal, same-sex friendship dyads. Results indicated that youth with friends experiencing low levels of internalizing distress reported poorer friendship quality and decreased levels of social support and self-disclosure within the friendship compared to youth with friends experiencing average or high internalizing distress. In a second set of analyses controlling for the focal child's own internalizing symptoms, gender, and age, friend's level of internalizing distress remained a significant, unique predictor of target participants' self-disclosure about their own problems within the friendship. The findings suggest that a mild degree of internalizing distress may enhance, rather than harm, friendships amongst youth.

Darwinism and environmentalism

OpenAIRE

Garvey, Brian

2011-01-01

What implications does Darwinism have for our attitude towards the environment? At first sight, it might look as though Darwinism is not friendly towards environmental concerns. Darwinism is often thought to paint a picture of ruthless competition between, as well as within, species. Moreover, Darwinism may be thought to encourage a view of the environment as something to be exploited for self-interested gain. The present paper proposes a more positive view. It will be argued that mutual bene...

Friends' Organizations: The Supportive Element Essential to Libraries.

Science.gov (United States)

Progar, Dorothy

Reviewed are the history and public relations, financial and service roles of lay "Friends of the Library" groups. Programs and techniques useful in the pursuit of these roles are suggested. Guidelines for a constitution, fee schedule, and administrative structure plus a bibliography give potential friends organizations help in…

Environmental effect of water absorption and flexural strength of red ...

African Journals Online (AJOL)

user

International Journal of Engineering, Science and Technology ... advantages over glass fiber or carbon fiber like renewable, environmental friendly, low ... in fiber reinforced plastics, a judicious selection of matrix and the reinforcing phase can ...

An environmentally-friendly, highly efficient, gas pressure-assisted sample introduction system for ICP-MS and its application to detection of cadmium and lead in human plasma.

Science.gov (United States)

Cao, Yupin; Deng, Biyang; Yan, Lizhen; Huang, Hongli

2017-05-15

An environmentally friendly and highly efficient gas pressure-assisted sample introduction system (GPASIS) was developed for inductively-coupled plasma mass spectrometry. A GPASIS consisting of a gas-pressure control device, a customized nebulizer, and a custom-made spray chamber was fabricated. The advantages of this GPASIS derive from its high nebulization efficiencies, small sample volume requirements, low memory effects, good precision, and zero waste emission. A GPASIS can continuously, and stably, nebulize 10% NaCl solution for more than an hour without clogging. Sensitivity, detection limits, precision, long-term stability, double charge and oxide ion levels, nebulization efficiencies, and matrix effects of the sample introduction system were evaluated. Experimental results indicated that the performance of this GPASIS, was equivalent to, or better than, those obtained by conventional sample introduction systems. This GPASIS was successfully used to determine Cd and Pb by ICP-MS in human plasma. Copyright © 2017 Elsevier B.V. All rights reserved.

Hybrid LCA model for assessing the embodied environmental impacts of buildings in South Korea

Energy Technology Data Exchange (ETDEWEB)

Jang, Minho, E-mail: minmin40@hanmail.net [Asset Management Division, Mate Plus Co., Ltd., 9th Fl., Financial News Bldg. 24-5 Yeouido-dong, Yeongdeungpo-gu, Seoul, 150-877 (Korea, Republic of); Hong, Taehoon, E-mail: hong7@yonsei.ac.kr [Department of Architectural Engineering, Yonsei University, Seoul, 120-749 (Korea, Republic of); Ji, Changyoon, E-mail: chnagyoon@yonsei.ac.kr [Department of Architectural Engineering, Yonsei University, Seoul, 120-749 (Korea, Republic of)

2015-01-15

The assessment of the embodied environmental impacts of buildings can help decision-makers plan environment-friendly buildings and reduce environmental impacts. For a more comprehensive assessment of the embodied environmental impacts of buildings, a hybrid life cycle assessment model was developed in this study. The developed model can assess the embodied environmental impacts (global warming, ozone layer depletion, acidification, eutrophication, photochemical ozone creation, abiotic depletion, and human toxicity) generated directly and indirectly in the material manufacturing, transportation, and construction phases. To demonstrate the application and validity of the developed model, the environmental impacts of an elementary school building were assessed using the developed model and compared with the results of a previous model used in a case study. The embodied environmental impacts from the previous model were lower than those from the developed model by 4.6–25.2%. Particularly, human toxicity potential (13 kg C{sub 6}H{sub 6} eq.) calculated by the previous model was much lower (1965 kg C{sub 6}H{sub 6} eq.) than what was calculated by the developed model. The results indicated that the developed model can quantify the embodied environmental impacts of buildings more comprehensively, and can be used by decision-makers as a tool for selecting environment-friendly buildings. - Highlights: • The model was developed to assess the embodied environmental impacts of buildings. • The model evaluates GWP, ODP, AP, EP, POCP, ADP, and HTP as environmental impacts. • The model presents more comprehensive results than the previous model by 4.6–100%. • The model can present the HTP of buildings, which the previous models cannot do. • Decision-makers can use the model for selecting environment-friendly buildings.

Development of an eco-friendly approach for biogenesis of silver nanoparticles using spores of Bacillus athrophaeus.

Science.gov (United States)

Hosseini-Abari, Afrouzossadat; Emtiazi, Giti; Ghasemi, Seyed Mahdi

2013-12-01

The biological synthesis methods have been emerging as a promising new approach for production of nanoparticles due to their simplicity and non-toxicity. In the present study, spores of Bacillus athrophaeus were used to achieve the objective of developing a green synthesis method of silver nanoparticles. Enzyme assay revealed that the spores and their heat inactivated forms (microcapsules) were highly active and their enzymatic contents differed from the vegetative cells. Laccase, glucose oxidase, and alkaline phosphatase activities were detected in the dormant forms, but not in the vegetative cells. Although no nanoparticle was produced by active cells of B. athrophaeus, both spores and microcapsules were efficiently capable of reducing the silver ions (Ag⁺) to elemental silver (Ag⁰) leading to the formation of nanoparticles from silver nitrate (AgNO₃). The presence of biologically synthesized silver nanoparticles was determined by obtaining broad spectra with maximum absorbance at 400 nm in UV-visible spectroscopy. The X-ray diffraction analysis pattern revealed that the nanoscale particles have crystalline nature with various topologies, as confirmed by transmission electron microscopy (TEM). The TEM micrograph showed the nanocrystal structures with dimensions ranging from 5 to 30 nm. Accordingly, the spore mixture could be employed as a factory for detoxification of heavy metals and subsequent production of nanoparticles. This research introduces an environmental friendly and cost effective biotechnological process for the extracellular synthesis of silver nanoparticles using the bacterial spores.

Three friendly walkers

Science.gov (United States)

Jensen, Iwan

2017-01-01

More than 15 years ago Guttmann and Vöge (2002 J. Stat. Plan. Inference 101 107), introduced a model of friendly walkers. Since then it has remained unsolved. In this paper we provide the exact solution to a closely allied model which essentially only differs in the boundary conditions. The exact solution is expressed in terms of the reciprocal of the generating function for vicious walkers which is a D-finite function. However, ratios of D-finite functions are inherently not D-finite and in this case we prove that the friendly walkers generating function is the solution to a non-linear differential equation with polynomial coefficients, it is in other words D-algebraic. We find using numerically exact calculations a conjectured expression for the generating function of the original model as a ratio of a D-finite function and the generating function for vicious walkers. We obtain an expression for this D-finite function in terms of a {{}2}{{F}1} hypergeometric function with a rational pullback and its first and second derivatives. Dedicated to Tony Guttmann on the occasion of his 70th birthday.

Biosurfactants: promising bioactive molecules for oral-related health applications.

Science.gov (United States)

Elshikh, Mohamed; Marchant, Roger; Banat, Ibrahim M

2016-09-01

Biosurfactants are naturally produced molecules that demonstrate potentially useful properties such as the ability to reduce surface tensions between different phases. Besides having similar properties to their artificial chemical counterparts, they are regarded as environmental friendly, biodegradable and less toxic, which make them desirable candidates for downstream applications. The structure-activity-related properties of the biosurfactants which are directly correlated with potency of the biosurfactants as antimicrobial agents, the ability of the biosurfactants to alter surface energies and their ability to increase bioavailability are particularly what attract researchers to exploit their potential use in the oral-related health applications. Current research into biosurfactant indicates significant future potential for use in cosmetic and therapeutic oral hygiene product formulations and related medical device treatments. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Elements in a new sustainable industrial culture - Environmental assessment in product development

DEFF Research Database (Denmark)

Alting, Leo; Hauschild, Michael Zwicky; Wenzel, Henrik

1997-01-01

In the last few years the environmental focus in the manufacturing industry has shifted from the manufacturing processes to the products themselves, as these are accountable for the environmental impacts in all life cycle phases. The paper describes for 3 industrial cases how a newly developed LCA...... methodology can assist the product developer in development of more environmentally friendly products. Finally, common experience gained will be discussed....

Responsible Tourism: Environmental Actions in Russian Hotel Industry

OpenAIRE

Lumpina, Lolita

2016-01-01

The aims of this thesis were to examine the responsible tourism topic, to determine the advantages and disadvantages of the environmental practices in Russian hotel industry and to investigate the reasons and values to follow the environmentally-friendly programs. The thesis includes theoretical and empirical parts. The theoretical section is based on the special literature, studies, researches, articles and online sources. The theoretical part will be divided into two primal headings: re...

Simulating the potential for Carbon Dioxide (CO2) reduction by the application of environmentally friendly transportation (case study: Gatot Subroto Street, Medan City)

Science.gov (United States)

Suryati, Isra; Turmuzi Lubis, Muhammad; Mawaddah, Nurul

2018-03-01

Carbon Dioxide (CO2) is one of the greenhouse gases. One source of greenhouse gases comes from the use of fossil fuels from the transport sector. The transportation sector is one of the dominant sectors in contributing to the greenhouse effect. This study aims to calculate the amount of CO2 from transportation activities by using mobile six equations in Gatot Subroto Street, Medan City. A sampling of CO2 concentration was done using Carbon Dioxide Monitor with Non-Dispersive Infra Red (NDIR) Analyzer method. Also, a simulation of the reduction of the number of private vehicles to mass transportation such as BRT gas-fired. The results showed CO2 emissions calculations with mobile six ranged from 47.2 kg CO2 - 978.2 kg CO2. Meanwhile, measurements range from 3,004 ppm - 3,405 ppm. Implementation of the concept of environmentally friendly transportation such as BRT in Gatot Subroto Street, Medan City will be able to reduce the average emissions load CO2 by 42.75% -78.80%. Based on the calculation simulation in this study is estimated the number of BRT required approximately 71 units.

Biosynthesis of planet friendly bioplastics using renewable carbon source.

Science.gov (United States)

Jain, Roopesh; Tiwari, Archana

2015-01-01

Plastics are uniquely flexible materials that offer considerable benefits as a simple packing to complex engineering material. Traditional synthetic polymers (often called plastics), such as polypropylene and polyethylene have been derived from non-renewable petrochemicals and known to cause environmental concerns due to their non-biodegradable nature. The enormous use of petroleum-based plastic compounds emphasized a need for sustainable alternatives derived from renewable resources. Bioplastics have attracted widespread attention, as eco-friendly and eco-tolerable alternative. But they have got certain limitations as well, such as high cost of production and unsatisfactory mechanical properties. In this study we have found agriculture waste (AW) as low-cost and renewable substrate for the production of bioplastics in bacterial fermentation. Improvement in tensile properties of produced bioplastic film has also been documented upon blending with Cellulose Acetate Butyrate (CAB).

Friends First? The Peer Network Origins of Adolescent Dating

Science.gov (United States)

Kreager, Derek A.; Molloy, Lauren E.; Moody, James; Feinberg, Mark E.

2015-01-01

The proximity of dating partners in peer friendship networks has important implications for the diffusion of health-risk behaviors and adolescent social development. We derive two competing hypotheses for the friendship-romance association. The first predicts that daters are proximally positioned in friendship networks prior to dating and that opposite-gender friends are likely to transition to dating. The second predicts that dating typically crosses group boundaries and opposite-gender friends are unlikely to later date. We test these hypotheses with longitudinal friendship data for 626 9th grade PROSPER heterosexual dating couples. Results primarily support the second hypothesis: romantic partners are unlikely to be friends in the previous year or share the same cohesive subgroup, and opposite-gender friends are unlikely to transition into dating. PMID:27134511

Single, binary and multi-component adsorption of some anions and heavy metals on environmentally friendly Carpobrotus edulis plant.

Science.gov (United States)

Chiban, Mohamed; Soudani, Amina; Sinan, Fouad; Persin, Michel

2011-02-01

A low-cost adsorbent and environmentally friendly adsorbent from Carpobrotus edulis plant was used for the removal of NO(3)(-), H(2)PO(4)(-), Pb(2+) and Cd(2+) ions from single, binary and multi-component systems. The efficiency of the adsorbent was studied using batch adsorption technique under different experimental conditions by varying parameters such as pH, initial concentration and contact time. In single component systems, the dried C. edulis has the highest affinity for Pb(2+), followed by NO(3)(-), Cd(2+) and H(2)PO(4)(-), with adsorption capacities of 175mg/g, 125mg/g, 28mg/g and 26mg/g, respectively. These results showed that the adsorption of NO(3)(-) and H(2)PO(4)(-) ions from single and binary component systems can be successfully described by Langmuir and Freundlich isotherms. Freundlich adsorption model, showed the best fit to the single and binary experimental adsorption data. These results also indicated that the adsorption yield of Pb(2+) ion was reduced by the presence of Cd(2+) ion in binary metal mixture. The competitive adsorption of NO(3)(-), H(2)PO(4)(-), Pb(2+) and Cd(2+) ions on dried C. edulis plant shows that NO(3)(-) and H(2)PO(4)(-) anions are able to adsorb on different free binding sites and Pb(2+) and Cd(2+) cations are able to adsorb on the same active sites of C. edulis particles. The dried C. edulis was found to be efficient in removing nitrate, phosphate, cadmium and lead from aqueous solution as compared to other adsorbents already used for the removal of these ions. Copyright © 2010 Elsevier B.V. All rights reserved.

The Importance of Friends in Autobiographical Memory

DEFF Research Database (Denmark)

Antalikova, Radka; Hansen, Tia G. B.; Gulbrandsen, Knut Arild

often rehearsed, family memories that were old and rarely rehearsed, and school memories that were in between on both variables. This supports theories of friendship as the primary social context for adolescent development. Moreover, content analysis found friend memories to mention others more often......Relatedness is a complex issue and it has been argued that developmental perspectives should complement cross-cultural comparisons. We noticed that cross-cultural studies of autobiographical memories tend to focus on early childhood and thus family, leaving the role of friends and school less...... explored. Thus, we asked adolescent school-goers who still lived with their parents for a meaningful memory from each of the settings family, school, and friendship. In both samples analyzed so far (Norwegians, N=22, and Slovaks, N=40) participants chose friend memories that were recent and reportedly...

Does the Gap in Family-Friendly Policies Drive the Family Gap?

DEFF Research Database (Denmark)

Nielsen, Helena Skyt; Simonsen, Marianne; Verner, Mette

2004-01-01

Segregation of the labour market into a family-friendly and a non-family-friendly sector implies that women self-select into sectors depending on institutional constraints, preferences for family-friendly working conditions and expected wage differences. We take this sector dimension into account...

Will biomass be the environmentally friendly fuel of the future?

International Nuclear Information System (INIS)

Hall, D.O.; Scrase, J.I.

1998-01-01

Many influential organisations foresee biomass playing a key role in a future, more sustainable, global energy supply matrix. Countries such as Austria, Brazil, Denmark, Finland, Sweden, India, the USA and the UK are actively encouraging the use of biomass for energy, and pushing forward the development of the necessary knowledge and technology for modern biomass energy systems. There is a growing consensus that renewable energy must progressively displace the use of fossil fuels, with fears of global climate change adding urgency to this need. Among the available types of renewable energy biomass is unique in its ability to provide solid, liquid and gaseous fuels which can be stored and transported. The potential resource for bioenergy is large, especially in forest-rich nations, in richer countries where there is a surplus of agricultural land, and in many low latitude countries where high biomass yields are possible. Therefore we expect biomass to be an important fuel of the future, but this cannot be taken for granted. The systems adopted must demonstrate clear environmental and social benefits relative to alternatives if the potential is to be realised. These benefits are not inherent to biomass energy, but depend on site- and fuel cycle-specific factors. Life-cycle analysis and evaluation of external costs are important means for assessing the social and environmental pros and cons of bioenergy systems. (author)

FY 1999 report on the potential survey of the environmentally friendly type coal utilization system - Dispatch of engineers. A. Project for supporting the introduction of the environmentally friendly type coal utilization system (model project)/pre-survey for the potential survey; 1999 nendo kankyo chowa gata sekitan riyo system kanosei chosa. Senmomka haken A. kankyo chowa gata sekitan riyo system donyu shien jigyo (model jigyo) - Kanosei chosa no jizen chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of the improvement of coal utilization technology and environmental preservation, the paper conducted the pre-survey of the introduction of coke oven gas desulfurization facilities in China and pre-survey of potentiality of the environmentally friendly type coal utilization system in India. The pre-survey in China was made for Anyang Steel Group Co. Ltd. and Laiwu Steel Group Co. Ltd. to judge their adaptability as site for the demonstrative project on the introduction of coke oven gas desulfurization facilities. As a result, it was confirmed that the former satisfied the conditions on Japan side such as the space for installation and prospect for fund raising. However, the amount of COG treatment was larger than that planned at Japan side, and it was found that as to the recovered sulfur, the company wanted the solid sulfur different from the fused sulfur planned at Japan side. In the survey in India, explanations were made to India of CFBC and the fluidized bed cement sintering system, bio-briquette production facilities, facilities for environmental measures, coal reforming technology, etc. At the same time, the site survey was made to examine/analyze possibilities of spread/development of Japan's CCT. (NEDO)

EPRI-DOE Conference on Environmentally-Enhanced Hydropower Turbines: Technical Papers

Energy Technology Data Exchange (ETDEWEB)

Hogan, T. [Alden Research Laboratory, Inc., Holden, MA (United States)

2011-12-01

The EPRI-DOE Conference on Environmentally-Enhanced Hydropower Turbines was a component of a larger project. The goal of the overall project was to conduct the final developmental engineering required to advance the commercialization of the Alden turbine. As part of this effort, the conference provided a venue to disseminate information on the status of the Alden turbine technology as well as the status of other advanced turbines and research on environmentally-friendly hydropower turbines. The conference was also a product of a federal Memorandum of Understanding among DOE, USBR, and USACE to share technical information on hydropower. The conference was held in Washington, DC on May 19 and 20, 2011 and welcomed over 100 attendees. The Conference Organizing Committee included the federal agencies with a vested interest in hydropower in the U.S. The Committee collaboratively assembled this conference, including topics from each facet of the environmentally-friendly conventional hydropower research community. The conference was successful in illustrating the readiness of environmentally-enhanced hydropower technologies. Furthermore, the topics presented illustrated the need for additional deployment and field testing of these technologies in an effort to promote the growth of environmentally sustainable hydropower in the U.S. and around the world.

Environmental Management: the Ideology of Natural Resource Rational Use

Science.gov (United States)

Zolotukhin, V. M.; Gogolin, V. A.; Yazevich, M. Yu; Baumgarten, M. I.; Dyagileva, A. V.

2017-01-01

The article presents an analysis of the ontological and methodological principles of environmental management. These principles form the united ideology of natural resource rational use as the environment preservation basis. Consideration of environmental issues from the environmental management point of view is stipulated by the concern of the scientific community about the existence of mankind and the sphere of its inhabiting. The need to overcome the stereotypes existing in mass consciousness about safe and environmentally friendly consumption is stressed. The process of forming environmental management policy should contribute to the stabilization (balancing) of the consumers’ expectations and collective decision-making based on a public ecological consensus.

Do promises matter? An exploration of the role of promises in psychological contract breach.

Science.gov (United States)

Montes, Samantha D; Zweig, David

2009-09-01

Promises are positioned centrally in the study of psychological contract breach and are argued to distinguish psychological contracts from related constructs, such as employee expectations. However, because the effects of promises and delivered inducements are confounded in most research, the role of promises in perceptions of, and reactions to, breach remains unclear. If promises are not an important determinant of employee perceptions, emotions, and behavioral intentions, this would suggest that the psychological contract breach construct might lack utility. To assess the unique role of promises, the authors manipulated promises and delivered inducements separately in hypothetical scenarios in Studies 1 (558 undergraduates) and 2 (441 employees), and they measured them separately (longitudinally) in Study 3 (383 employees). The authors' results indicate that breach perceptions do not represent a discrepancy between what employees believe they were promised and were given. In fact, breach perceptions can exist in the absence of promises. Further, promises play a negligible role in predicting feelings of violation and behavioral intentions. Contrary to the extant literature, the authors' findings suggest that promises may matter little; employees are concerned primarily with what the organization delivers.

A Forever Friend%永远的朋友

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

@@ A friend walk in when the rest of the world walks out. Sometimes in life, You find a special friend; Someone who changes your life just by being part of it. Someone who makes you laugh until you can't stop; Someone who makes you believe that there really is good in the world.

A fast algorithm for identifying friends-of-friends halos

Science.gov (United States)

Feng, Y.; Modi, C.

2017-07-01

We describe a simple and fast algorithm for identifying friends-of-friends features and prove its correctness. The algorithm avoids unnecessary expensive neighbor queries, uses minimal memory overhead, and rejects slowdown in high over-density regions. We define our algorithm formally based on pair enumeration, a problem that has been heavily studied in fast 2-point correlation codes and our reference implementation employs a dual KD-tree correlation function code. We construct features in a hierarchical tree structure, and use a splay operation to reduce the average cost of identifying the root of a feature from O [ log L ] to O [ 1 ] (L is the size of a feature) without additional memory costs. This reduces the overall time complexity of merging trees from O [ L log L ] to O [ L ] , reducing the number of operations per splay by orders of magnitude. We next introduce a pruning operation that skips merge operations between two fully self-connected KD-tree nodes. This improves the robustness of the algorithm, reducing the number of merge operations in high density peaks from O [δ2 ] to O [ δ ] . We show that for cosmological data set the algorithm eliminates more than half of merge operations for typically used linking lengths b ∼ 0 . 2 (relative to mean separation). Furthermore, our algorithm is extremely simple and easy to implement on top of an existing pair enumeration code, reusing the optimization effort that has been invested in fast correlation function codes.

Application of radiation technology for industry and environmental protection

International Nuclear Information System (INIS)

Sueo Machi

1996-01-01

The world population today is 5.7 billion and increasing by 94 million per year. In order to meet the increasing consumption of food and energy due to the tremendous population growth, unproved technologies which are environmentally friendly, are indispensable. In this context. a number of advanced technologies have been brought about by the LISC of radiation and isotopes. This paper highlights radiation technology, applications in industry, environmental conservation, and agriculture

Stereotype Threat and Perceptions of Family-Friendly Policies among Female Employees.

Science.gov (United States)

von Hippel, Courtney; Kalokerinos, Elise K; Zacher, Hannes

2016-01-01

In their efforts to recruit and retain female employees, organizations often attempt to make their workplaces "family-friendly." Yet there is little research on how women view family-friendly policies, particularly women who experience gender-based stereotype threat, or the concern of being viewed through the lens of gender stereotypes at work. Pilot research with female managers ( N = 169) showed that women who experienced stereotype threat perceived more negative career consequences for utilizing family-friendly policies. We then conducted two studies to further probe this relationship. Study 1 replicated the relationship between stereotype threat and the perceived consequences of utilizing family-friendly policies among women who recently returned to work after the birth of a child ( N = 65). In Study 2 ( N = 473), female employees who reported feelings of stereotype threat perceived more negative consequences of utilizing family-friendly policies, but they also reported greater intentions to use these policies. Our findings suggest that female employees are susceptible to stereotype threat, which in turn is associated with more negative views of family-friendly policies. Thus, the mere provision of such policies may not create the kind of family-friendly workplaces that organizations are attempting to provide.

Environmentally-Friendly Geopolymeric Binders Made with Silica

Science.gov (United States)

Erdogan, S. T.

2013-12-01

Portland cement (PC) is the ubiquitous binding material for constructions works. It is a big contributor to global warming and climate change since its production is responsible for 5-10 % of all anthropogenic CO2 emissions. Half of this emission arises from the calcination of calcareous raw materials and half from kiln fuel burning and cement clinker grinding. Recently there have been efforts to develop alternative binders with lower greenhouse gas emissions. One such class of binders is geopolymers, formed by activating natural or waste materials with suitable alkaline or acidic solutions. These binders use natural or industrial waste raw materials with a very low CO2 footprint from grinding of the starting materials, and some from the production of the activating chemicals. The total CO2 emissions from carefully formulated mixtures can be as low as 1/10th - 1/5th of those of PC concrete mixtures with comparable properties. While use of industrial wastes as raw materials is environmentally preferable, the variability of their chemical compositions over time renders their use difficult. Use of natural materials depletes resources but can have more consistent properties and can be more easily accepted. Silica sand is a natural material containing very high amounts of quartz. Silica fume is a very fine waste from silicon metal production that is mostly non-crystalline silica. This study describes the use of sodium hydroxide and sodium silicate solutions to yield mortars with mechanical properties comparable to those of portland cement mortars and with better chemical and thermal durability. Strength gain is slower than with PC mixtures at room temperature but adequate ultimate strength can be achieved with curing at slightly elevated temperatures in less than 24 h. The consistency of the chemical compositions of these materials and their abundance in several large, developing countries makes silica attractive for producing sustainable concretes with reduced carbon

Jordanian dentists' knowledge and implementation of eco-friendly dental office strategies.

Science.gov (United States)

Al Shatrat, Sabha M; Shuman, Deanne; Darby, Michele L; Jeng, Hueiwang A

2013-06-01

To investigate the implementation of eco-friendly dental office strategies by Jordanian dentists. Self-designed questionnaires were provided to 150 dentists working in private dental practices in the city of Amman, the capital of Jordan. Dentists' names and addresses were obtained from the Jordanian Dental Association. Overall, the level of knowledge about eco-friendly dental offices strategies was high for amalgam, radiology, paper waste, infection control and energy and water conservation. In terms of implementation, the majority of Jordanian dentists apply few eco-friendly dental offices strategies. The most frequently identified barriers to implementation of eco-friendly dental offices strategies were cost and lack of incentives from the government. Most Jordanian dental practices are not eco-friendly. A continued focus on the impact of dental practices on the environment is needed through formal and continuing dental education. Results of this study can guide policy development to encourage implementation of eco-friendly strategies. © 2013 FDI World Dental Federation.

Patients as friends -awkward or advantageous? | Moosa | South ...

African Journals Online (AJOL)

Rural General Practitioners often find themselves in a small community having patients as friends. This can lead to difficulty in the relationship. This is a reflection on family friends where I missed the youngest child's diagnosis of myoclonic epilepsy in the social context and which led to a crisis in the relationship. This led me ...

College Men's Involvement in Friends with Benefits Relationships

Science.gov (United States)

Olmstead, Spencer B.; Pasley, Kay; Fincham, Frank D.

2016-01-01

Friends with benefits relationships (FWBRs) occur when two friends who are not in a committed romantic relationship engage in ongoing sexual activity (i.e., oral sex and/or intercourse) over a period of time. The purpose of this study was to examine the demographic and psychosocial characteristics of college men involved in FWBRs (N = 407) using s…

Friends of friends: are indirect connections in social networks important to animal behaviour?

Science.gov (United States)

Brent, Lauren J N

2015-05-01

Friend of a friend relationships, or the indirect connections between people, influence our health, well-being, financial success and reproductive output. As with humans, social behaviours in other animals often occur within a broad interconnected network of social ties. Yet studies of animal social behaviour tend to focus on associations between pairs of individuals. With the increase in popularity of social network analysis, researchers have started to look beyond the dyad to examine the role of indirect connections in animal societies. Here, I provide an overview of the new knowledge that has been uncovered by these studies. I focus on research that has addressed both the causes of social behaviours, i.e. the cognitive and genetic basis of indirect connections, as well as their consequences, i.e. the impact of indirect connections on social cohesion, information transfer, cultural practices and fitness. From these studies, it is apparent that indirect connections play an important role in animal behaviour, although future research is needed to clarify their contribution.

Eco-friendly GGBS Concrete: A State-of-The-Art Review

Science.gov (United States)

Saranya, P.; Nagarajan, Praveen; Shashikala, A. P.

2018-03-01

Concrete is the most commonly used material in the construction industry in which cement is its vital ingredient. Although the advantages of concrete are many, there are side effects leading to environmental issues. The manufacturing process of cement emits considerable amount of carbon dioxide (CO2). Therefore is an urgent need to reduce the usage of cement. Ground Granulated Blast furnace Slag (GGBS) is a by-product from steel industry. It has good structural and durable properties with less environmental effects. This paper critically reviews the literatures available on GGBS used in cement concrete. In this paper, the literature available on GGBS are grouped into engineering properties of GGBS concrete, hydraulic action of GGBS in concrete, durability properties of GGBS concrete, self- compacting GGBS concrete and ultrafine GGBS are highlighted. From the review of literature, it was found that the use of GGBS in concrete construction will be eco-friendly and economical. The optimum percentage of replacement of cement by GGBS lies between 40 - 45 % by weight. New materials that can be added in addition to GGBS for getting better strength and durability also highlighted.

Nurses perceptions of a user friendly interface

OpenAIRE

Alshafai, Fatimah

2017-01-01

Introduction: The successful implementation of clinical information systems depends to a large extent on its usability. Usability can be achieved by a strong focus on interface quality. With a focus on improving the quality of patient care, growing numbers of clinical information systems have been advertised as being "user-friendly". However, the term "user-friendly" may not be quite accurate and in some circumstances could be misleading. Within a clinical setting, an interface designed as ea...

Effect of paint-bake like treatment on mechanical properties of Mg ...

African Journals Online (AJOL)

Magnesium alloys are promising materials for the fabrication of automotive components due to their lightweight which could help car manufacturers reduce the amount of emissions generated per automobile and to meet present and future regulations of owning more environmentally friendly vehicles. However, the low ...

Support Between Siblings and Between Friends : Two Worlds Apart?

NARCIS (Netherlands)

Voorpostel, Marieke; Lippe, Tanja van der

2007-01-01

This research examines whether siblings and friends resemble each other in supportive behavior. Using a Dutch national sample of 6,289 individuals containing 12,578 relationships with siblings and friends, we investigated the relative importance of gender composition, geographical proximity,

[Microbial "friend-foe" identification in human intestine microsymbiocenosis].