Misalignment Effect Function Measurement for Oblique Rotation Axes: Counterintuitive Predictions and Theoretical Extensions

Science.gov (United States)

Ellis, Stephen R.; Adelstein, Bernard D.; Yeom, Kiwon

2013-01-01

The Misalignment Effect Function (MEF) describes the decrement in manual performance associated with a rotation between operators' visual display frame of reference and that of their manual control. It now has been empirically determined for rotation axes oblique to canonical body axes and is compared with the MEF previously measured for rotations about canonical axes. A targeting rule, called the Secant Rule, based on these earlier measurements is derived from a hypothetical process and shown to describe some of the data from three previous experiments. It explains the motion trajectories determined for rotations less than 65deg in purely kinematic terms without the need to appeal to a mental rotation process. Further analysis of this rule in three dimensions applied to oblique rotation axes leads to a somewhat surprising expectation that the difficulty posed by rotational misalignment should get harder as the required movement is shorter. This prediction is confirmed. Geometry underlying this rule also suggests analytic extensions for predicting more generally the difficulty of making movements in arbitrary directions subject to arbitrary misalignments.

Geometry and mechanics of teleost gastrulation and the formation of primary embryonic axes.

Science.gov (United States)

Cherdantseva, Elena M; Cherdantsev, Vladimir G

2006-01-01

Examination of normal shaping dynamics and immediate and long-term responses to blastoderm cutting in zebrafish and loach embryos prior to the onset of gastrulation and during the course of epiboly revealed that anteroposterior (AP) and dorsoventral (DV) polarity formation is connected with shaping of the blastoderm circumferential region, which stretches along and shrinks across its movement axes and originates the non-isotropic fields of tensile stresses. Based on data from cutting experiments and quantitative morphology, we reconstructed the movement-shaping patterns of epiboly and embryonic shield formation. We revealed that AP and DV axes originate as a mass cell movement subject to the movement-shaping equivalence principle, which means the spatial series of differently shaped areas corresponding to the time succession of the same area shaping. Maintenance of the main body axes in orthogonal orientation depends on the mechanical equilibrium principle allowing for converting shape asymmetry into that of tensile stresses and vice versa. The causal relationship between the main movement-shaping axes and that of embryonic polarity was proved in cutting experiments in which the DV axis direction was subject to rearrangement so as to adjust to the new direction of mass cell movement axes induced by healing the wound in the blastoderm circumferential region.

TWO FACES OF MASCULINITY IN AXE CHOCOLATE ADVERTISEMENT

Directory of Open Access Journals (Sweden)

Bernadeta Ririn

2016-01-01

Full Text Available An advertisement has never been departed from an ideology. Although it occurs implicitly, an ideology in an advertisement is able to make someone believe in particular value of life. This study tries to reveal the ideology both in positive meaning as a belief system which marks certain group and in negative meaning as a false consciousness. Besides that, this study also tries to reveal the way of illustrating the ideology that lies within the Axe Chocolate advertisement. In order to obtain the ideology, each scene in the Axe Chocolate advertisement is analyzed based on Barthes’ model of sign. Then, to find the way of illustrating the ideology, the connotative meaning of mass media codes applied in the advertisement, i.e. fashion codes, color codes, non-verbal codes and technical codes is analyzed. The result of this study shows that masculinity appears as the negative and positive ideology because masculinity is not contradictory with Indonesian culture. However, the value of masculinity shown by the advertiser is narrowed down into the area of sexuality only. In addition to this, the way of illustrating the ideology of masculinity in sexuality area also gives negative stereotype to women, for instance by showing women as figures who like to advertise their body through wearing fashion which exposes women’s body.

TWO FACES OF MASCULINITY IN AXE CHOCOLATE ADVERTISEMENT

Directory of Open Access Journals (Sweden)

Bernadeta Ririn

2012-01-01

Full Text Available Abstract: An advertisement has never been departed from an ideology. Although it occurs implicitly, an ideology in an advertisement is able to make someone believe in particular value of life. This study tries to reveal the ideology both in positive meaning as a belief system which marks certain group and in negative meaning as a false consciousness. Besides that, this study also tries to reveal the way of illustrating the ideology that lies within the Axe Chocolate advertisement. In order to obtain the ideology, each scene in the Axe Chocolate advertisement is analyzed based on Barthes’ model of sign. Then, to find the way of illustrating the ideology, the connotative meaning of mass media codes applied in the advertisement, i.e. fashion codes, color codes, non-verbal codes and technical codes is analyzed. The result of this study shows that masculinity appears as the negative and positive ideology because masculinity is not contradictory with Indonesian culture. However, the value of masculinity shown by the advertiser is narrowed down into the area of sexuality only. In addition to this, the way of illustrating the ideology of masculinity in sexuality area also gives negative stereotype to women, for instance by showing women as figures who like to advertise their body through wearing fashion which exposes women’s body.   Keywords: ideology, advertisement, semiotics, mass media codes

Innovative wedge axe in making split firewood

International Nuclear Information System (INIS)

Mutikainen, A.

1998-01-01

Interteam Oy, a company located in Espoo, has developed a new method for making split firewood. The tools on which the patented System Logmatic are based are wedge axe and cylindrical splitting-carrying frame. The equipment costs about 495 FIM. The block of wood to be split is placed inside the upright carrying frame and split in a series of splitting actions using the innovative wedge axe. The finished split firewood remains in the carrying frame, which (as its name indicates) also serves as the means for carrying the firewood. This innovative wedge-axe method was compared with the conventional splitting of wood using an axe (Fiskars -handy 1400 splitting axe costing about 200 FIM) in a study conducted at TTS-Institute. There were eight test subjects involved in the study. In the case of the wedge-axe method, handling of the blocks to be split and of the finished firewood was a little quicker, but in actual splitting it was a little slower than the conventional axe method. The average productivity of splitting the wood and of the work stages related to it was about 0.4 m 3 per effective hour in both methods. The methods were also equivalent of one another in terms of the load imposed by the work when measured in terms of the heart rate. As regards work safety, the wedge-axe method was superior to the conventional method, but the continuous striking action and jolting transmitted to the arms were unpleasant (orig.)

The BANANA Project. IV. Two Aligned Stellar Rotation Axes in the Young Eccentric Binary System EP Crucis: Primordial Orientation and Tidal Alignment

Science.gov (United States)

Albrecht, Simon; Setiawan, Johny; Torres, Guillermo; Fabrycky, Daniel C.; Winn, Joshua N.

2013-04-01

With observations of the EP Cru system, we continue our series of measurements of spin-orbit angles in eclipsing binary star systems, the BANANA project (Binaries Are Not Always Neatly Aligned). We find a close alignment between the sky projections of the rotational and orbital angular momentum vectors for both stars (βp = -1.°8 ± 1.°6 and |βs| < 17°). We also derive precise absolute dimensions and stellar ages for this system. The EP Cru and DI Her systems provide an interesting comparison: they have similar stellar types and orbital properties, but DI Her is younger and has major spin-orbit misalignments, raising the question of whether EP Cru also had a large misalignment at an earlier phase of evolution. We show that tidal dissipation is an unlikely explanation for the good alignment observed today, because realignment happens on the same timescale as spin-orbit synchronization, and the stars in EP Cru are far from synchronization (they are spinning nine times too quickly). Therefore it seems that some binaries form with aligned axes, while other superficially similar binaries are formed with misaligned axes. Based on observations made with ESOs 2.2 m Telescopes at the La Silla Paranal Observatory under program ID 084.C-1008 (12.5%) and under MPIA guaranteed time (87.5%).

The AXES-lite video search engine

NARCIS (Netherlands)

Chen, Shu; McGuinness, Kevin; Aly, Robin; de Jong, Franciska M.G.; O' Connor, Noel E.

The aim of AXES is to develop tools that provide various types of users with new engaging ways to interact with audiovisual libraries, helping them discover, browse, navigate, search, and enrich archives. This paper describes the initial (lite) version of the AXES search engine, which is targeted at

Sensitivity of a subject-specific musculoskeletal model to the uncertainties on the joint axes location.

Science.gov (United States)

Martelli, Saulo; Valente, Giordano; Viceconti, Marco; Taddei, Fulvia

2015-01-01

Subject-specific musculoskeletal models have become key tools in the clinical decision-making process. However, the sensitivity of the calculated solution to the unavoidable errors committed while deriving the model parameters from the available information is not fully understood. The aim of this study was to calculate the sensitivity of all the kinematics and kinetics variables to the inter-examiner uncertainty in the identification of the lower limb joint models. The study was based on the computer tomography of the entire lower-limb from a single donor and the motion capture from a body-matched volunteer. The hip, the knee and the ankle joint models were defined following the International Society of Biomechanics recommendations. Using a software interface, five expert anatomists identified on the donor's images the necessary bony locations five times with a three-day time interval. A detailed subject-specific musculoskeletal model was taken from an earlier study, and re-formulated to define the joint axes by inputting the necessary bony locations. Gait simulations were run using OpenSim within a Monte Carlo stochastic scheme, where the locations of the bony landmarks were varied randomly according to the estimated distributions. Trends for the joint angles, moments, and the muscle and joint forces did not substantially change after parameter perturbations. The highest variations were as follows: (a) 11° calculated for the hip rotation angle, (b) 1% BW × H calculated for the knee moment and (c) 0.33 BW calculated for the ankle plantarflexor muscles and the ankle joint forces. In conclusion, the identification of the joint axes from clinical images is a robust procedure for human movement modelling and simulation.

46 CFR 108.499 - Fire axes.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Fire axes. 108.499 Section 108.499 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Fire Extinguishing Systems Miscellaneous Firefighting Equipment § 108.499 Fire axes. Each unit must have at least two...

A Critical Approach towards Jade Axes in Southern Scandinavia

DEFF Research Database (Denmark)

Sørensen, Lasse

2013-01-01

Southern Scandinavian jade axes have been interpreted as items of prestigious exchange illustrating contact with the agrarian societies of Central Europe and reflecting agrarian ideas and ideology. They are therefore important in the discussion concerning the process of neolithisation in Northern...... axes produced in local raw materials clearly indicate the importance of this artefact group within the Mesolithic and Neolithic transition in Southern Scandinavia....... Europe, but the difficulties in differentiating between Neolithic axes of alpine jade from axes imported from other continents has attracted some criticism. Furthermore, some of the jade axes found in Southern Scandinavian collections originate from private collectors, many of whom had contacts all over...... Europe. The axes lack therefore secure archaeological contexts, and may suggest that they have not been found in Scandinavian soil. The aim of this paper is to maintain a critical approach towards the question of the origin of the jade axes from Southern Scandinavia. However, the many imitations of jade...

46 CFR 181.600 - Fire axe.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Fire axe. 181.600 Section 181.600 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) FIRE PROTECTION EQUIPMENT Additional Equipment § 181.600 Fire axe. A vessel of more than 19.8 meters (65 feet) in length...

Testing the significance of canonical axes in redundancy analysis

NARCIS (Netherlands)

Legendre, P.; Oksanen, J.; Braak, ter C.J.F.

2011-01-01

1. Tests of significance of the individual canonical axes in redundancy analysis allow researchers to determine which of the axes represent variation that can be distinguished from random. Variation along the significant axes can be mapped, used to draw biplots or interpreted through subsequent

Directional cell migration establishes the axes of planar polarity in the posterior lateral-line organ of the zebrafish.

Science.gov (United States)

López-Schier, Hernán; Starr, Catherine J; Kappler, James A; Kollmar, Richard; Hudspeth, A J

2004-09-01

The proper orientation of mechanosensory hair cells along the lateral-line organ of a fish or amphibian is essential for the animal's ability to sense directional water movements. Within the sensory epithelium, hair cells are polarized in a stereotyped manner, but the mechanisms that control their alignment relative to the body axes are unknown. We have found, however, that neuromasts can be oriented either parallel or perpendicular to the anteroposterior body axis. By characterizing the strauss mutant zebrafish line and by tracking labeled cells, we have demonstrated that neuromasts of these two orientations originate from, respectively, the first and second primordia. Furthermore, altering the migratory pathway of a primordium reorients a neuromast's axis of planar polarity. We propose that the global orientation of hair cells relative to the body axes is established through an interaction between directional movement by primordial cells and the timing of neuromast maturation.

BODIES OF KNOWLEDGE IN PROJECT MANAGEMENT AND PROJECT QUALITY MANAGEMENT

OpenAIRE

Tamara Gvozdenovic; Mirjana Miljanovic; Aleksandar Jegdic; Zeljko Crnogorcic

2008-01-01

One of the main trends is standardization of project management. Some of the most important bodies of knowledge in project management, which were created by professional associations for project management are given in this paper. The main of the project management, apart from minimization of time, resources and costs, is to finish the project in the required quality, i.e. it is very important during the whole process of project management to provide realizing the project without any deviatio...

THE BODY IN MUSIC, THE MUSIC IN BODY: A COMMUNITY INTEGRATION PROJECT

Directory of Open Access Journals (Sweden)

Fábio Pra da Silva de Souza

2009-07-01

Full Text Available This article is the result of the Artistic and Culture Department extension project “The Body in Music, The Music in Body: a community integration project” that took music to community on Universidade Federal de Santa Catarina (UFSC in two different ways: buy choir singing group and the music therapy activities on Parkinson Disease Patients Group. The objectives of this project were to integrate choir singing to dance, develop music perception and body expression. Broadcast choir singing, improve facial expression and body movements. To reach these objectives were done body expression workshops, music and vocal technique rehearsals, rhythm exercises and some auditions among UFSC an other public places in Florianópolis.

Analytical study of the effects of soft tissue artefacts on functional techniques to define axes of rotation.

Science.gov (United States)

De Rosario, Helios; Page, Álvaro; Besa, Antonio

2017-09-06

The accurate location of the main axes of rotation (AoR) is a crucial step in many applications of human movement analysis. There are different formal methods to determine the direction and position of the AoR, whose performance varies across studies, depending on the pose and the source of errors. Most methods are based on minimizing squared differences between observed and modelled marker positions or rigid motion parameters, implicitly assuming independent and uncorrelated errors, but the largest error usually results from soft tissue artefacts (STA), which do not have such statistical properties and are not effectively cancelled out by such methods. However, with adequate methods it is possible to assume that STA only account for a small fraction of the observed motion and to obtain explicit formulas through differential analysis that relate STA components to the resulting errors in AoR parameters. In this paper such formulas are derived for three different functional calibration techniques (Geometric Fitting, mean Finite Helical Axis, and SARA), to explain why each technique behaves differently from the others, and to propose strategies to compensate for those errors. These techniques were tested with published data from a sit-to-stand activity, where the true axis was defined using bi-planar fluoroscopy. All the methods were able to estimate the direction of the AoR with an error of less than 5°, whereas there were errors in the location of the axis of 30-40mm. Such location errors could be reduced to less than 17mm by the methods based on equations that use rigid motion parameters (mean Finite Helical Axis, SARA) when the translation component was calculated using the three markers nearest to the axis. Copyright © 2017 Elsevier Ltd. All rights reserved.

NIH Human Microbiome Project defines normal bacterial makeup of the body

Science.gov (United States)

Microbes inhabit just about every part of the human body, living on the skin, in the gut, and up the nose. Sometimes they cause sickness, but most of the time, microorganisms live in harmony with their human hosts, providing vital functions essential for

Geometrical relationship of flare-generated solar wind structures to the magnetic axes of bipolar sunspot groups adjacent to their originating solar flares

International Nuclear Information System (INIS)

Ivanov, K.G.; Evdokimova, L.V.; Mikerina, N.V.

1982-01-01

Occurrences of interplanetary shock waves near the Earth after the powerful isolated flares of 1957-1978 are investigated. The close connection between the occurrences of shock waves and the positions of magnetic axes of bipolar groups of sunspots is suggested on the basis of a statistical study. The shock waves are principally observed when the Earth finds itself near the planes that are projected through the flares in parallel to the appropriate magnetic axes of the nearest bipolar groups. This regularity is interpreted as an indirect argument for a three-dimensional geometry for the interplanetary shock waves which, when projected on these flattened to corresponding planes, are traces of large circular arcs. The typical angular scales of isolated interplanetary shock waves are estimated as approx. equal to 150 0 and approx. equal to 30 0 parallel and perpendicular, respectively, to the magnetic axes correspondingly. (orig.)

BODIES OF KNOWLEDGE IN PROJECT MANAGEMENT AND PROJECT QUALITY MANAGEMENT

Directory of Open Access Journals (Sweden)

Tamara Gvozdenovic

2008-03-01

Full Text Available One of the main trends is standardization of project management. Some of the most important bodies of knowledge in project management, which were created by professional associations for project management are given in this paper. The main of the project management, apart from minimization of time, resources and costs, is to finish the project in the required quality, i.e. it is very important during the whole process of project management to provide realizing the project without any deviations from the previously set quality standards. Basic processes of project quality management are: quality planning, quality assurance and quality control.

Accuracy of Body Mass Index-defined Obesity Status in US Firefighters

Directory of Open Access Journals (Sweden)

Nattinee Jitnarin

2014-09-01

Full Text Available Obesity is a significant problem affecting United States (US firefighters. While body mass index (BMI is widely used to diagnose obesity, its use for this occupational group has raised concerns about validity. We examined rates and types of misclassification of BMI-based obesity status compared to body fat percentage (BF% and waist circumference (WC. Male career firefighters (N = 994 from 20 US departments completed all three body composition assessments. Mean BMI, BF%, and WC were 29 kg/m2, 23%, and 97 cm, respectively. Approximately 33% and 15% of BF%- and WC-defined obese participants were misclassified as non-obese (false negatives using BMI, while 8% and 9% of non-obese participants defined by BF% and WC standards were identified as obese (false positives using BMI. When stratified by race/ethnicity, Pacific Islanders showed high rates of false positive misclassification. Precision in obesity classification would be improved by using WC along with BMI to determine firefighters' weight status.

Two axes sun tracking system with PLC control

International Nuclear Information System (INIS)

Abdallah, Salah; Nijmeh, Salem

2004-01-01

In this paper, an electromechanical, two axes sun tracking system is designed and constructed. The programming method of control with an open loop system is employed where the programmable logic controller is used to control the motion of the sun tracking surface. An experimental study was performed to investigate the effect of using two axes tracking on the solar energy collected. The collected energy was measured and compared with that on a fixed surface tilted at 32 deg. towards the south. The results indicate that the measured collected solar energy on the moving surface was significantly larger than that on a fixed surface. The two axes tracking surface showed a better performance with an increase in the collected energy of up to 41.34% compared with the fixed surface

Assembly For Moving a Robotic Device Along Selected Axes

Science.gov (United States)

Nowlin, Brentley Craig (Inventor); Koch, Lisa Danielle (Inventor)

2001-01-01

An assembly for moving a robotic device along selected axes includes a programmable logic controller (PLC) for controlling movement of the device along selected axes to effect movement of the device to a selected disposition. The PLC includes a plurality of single axis motion control modules, and a central processing unit (CPU) in communication with the motion control modules. A human-machine interface is provided for operator selection of configurations of device movements and is in communication with the CPU. A motor drive is in communication with each of the motion control modules and is operable to effect movement of the device along the selected axes to obtain movement of the device to the selected disposition.

Electron diffraction study of {alpha}-AlMnSi crystals including non-crystallographic axes

Energy Technology Data Exchange (ETDEWEB)

Song, G.L.; Bursill, L.A.

1997-06-01

The structure of crystalline {alpha}-AlMnSi is examined by electron diffraction. Six distinct zone axes are examined, including both normal crystallographic and non-crystallographic zones axes, allowing the space group symmetry to be studied. Electron diffraction patterns characteristic of Pm3-bar were obtained for thicker specimens. However, for very thin specimens, as used for HRTEM imaging, the electron diffraction patterns were characteristic of Im3-bar space group symmetry. The structural basis of the Pm3-bar to Im3-bar transformation may be understood in terms of an analysis of the icosahedral structural elements located at the corners and body-centers of the cubic unit cell. A method for indexing the non-crystallographic zone axis diffraction patterns is described. An electron diffraction pattern of the 5-fold axis of the quasicrystalline phase i-AlMnSi is also included; this is compared with the experimental results and calculations for the [0{tau}1] axis of Pm3-bar and Im3-bar crystalline phases. 26 refs., 4 tabs., 7 figs.

The mystery of perpendicular fivefold axes and the fourth dimension in intermetallic structures.

Science.gov (United States)

Berger, Robert F; Lee, Stephen; Johnson, Jeffreys; Nebgen, Ben; Sha, Fernando; Xu, Jiaqi

2008-01-01

The structures of eight related known intermetallic structure types are the impetus to this paper: Li21Si5, Mg44Rh7, Zn13(Fe,Ni)2, Mg6Pd, Na6Tl, Zn91Ir11, Li13Na29Ba19, and Al69Ta39. All belong to the F43m space group, have roughly 400 atoms in their cubic unit cells, are built up at least partially from the gamma-brass structure, and exhibit pseudo-tenfold symmetric diffraction patterns. These pseudo-tenfold axes lie in the {110} directions, and thus present a paradox. The {110} set is comprised of three pairs of perpendicular directions. Yet no 3D point group contains a single pair of perpendicular fivefold axes (by Friedel's Law, a fivefold axis leads to a tenfold diffraction pattern). The current work seeks to resolve this paradox. Its resolution is based on the largest of all 4D Platonic solids, the 600-cell. We first review the 600-cell, building an intuition discussing 4D polyhedroids (4D polytopes). We then show that the positions of common atoms in the F43m structures lie close to the positions of vertices in a 3D projection of the 600-cell. For this purpose, we develop a projection method that we call intermediate projection. The introduction of the 600-cell resolves the above paradox. This 4D Platonic solid contains numerous orthogonal fivefold rotations. The six fivefold directions that are best preserved after projection prove to lie along the {110} directions of the F43m structures. Finally, this paper shows that at certain ideal projected cluster sizes related to one another by the golden mean (tau=(1+ radical 5)/2), constructive interference leading to tenfold diffraction patterns is optimized. It is these optimal values that predominate in actual F43m structures. Explicit comparison of experimental cluster sizes and theoretically derived cluster sizes shows a clear correspondence, both for isolated and crystalline pairs of projected 600-cells.

Lessons learned from training peer-leaders to conduct Body Project workshops.

Science.gov (United States)

Vanderkruik, Rachel; Strife, Samantha; Dimidjian, Sona

2017-01-01

The Body Project is a cognitive-dissonance intervention that is effective in improving body satisfaction for high school and college aged women. The Body Project can be implemented by trained peers, thus increasing its potential for broad and cost-effective dissemination. Little is known, however, about peer-leaders' perceptions of their training needs and preferences to deliver prevention programs. This qualitative study explored the perceptions of training strengths and areas of improvement among 14 Body Project peer-leaders at a college campus through a series of focus groups. Recommendations are made to inform training for the Body Project as well as peer-led prevention and treatment interventions more broadly.

How do you define body image? Exploring conceptual gaps in understandings of body image at an exercise facility.

Science.gov (United States)

Bailey, K Alysse; Gammage, Kimberley L; van Ingen, Cathy

2017-12-01

The definition of body image has evolved within research; however, less is known about the layperson's understanding of the construct. This study explored how members and student trainees of an exercise facility (designed for older adults, people with physical disability, and those with cardiac complications) defined body image. Nineteen participants completed a one-on-one interview, and seven of those participants took part in six additional focus group meetings. The following main themes were found: stereotypical assumptions about body image (e.g., it is solely a person's weight or merely a woman's issue), body image continua for positive and negative body image, degree of complexity of body image dimensions, broad considerations of body image (e.g., it is self-esteem), and limited knowledge about body image. These findings suggest a need for knowledge translation between researchers and the general public which informs future body image program design. Copyright © 2017 Elsevier Ltd. All rights reserved.

Desiccation and freezing tolerance of embryonic axes from Citrus sinensis [L.] osb. pretreated with sucrose.

Science.gov (United States)

Santos, Izulmé R I; Stushnoff, Cecil

2003-01-01

Embryonic axes of Citrus sinensis L. were successfully cryopreserved. While fully hydrated unfrozen axes germinated 100%, survival decreased as axes water content dropped, and total loss of viability was observed when the water content dropped to 0.04 and 0.10 mg H2O/mg dry mass, for axes without and with sucrose preculture, respectively. Fully hydrated axes did not survive exposure to liquid nitrogen. Highest seedling recovery (93-100%) for untreated axes was observed at 0.26 to 0.15 mg H2O/mg dry mass. Differential scanning calorimetry revealed the presence of broad melting peaks in fully hydrated embryonic axes. The size of the melting peak diminished as water was removed by desiccation. Minimum melting of water was observed at the point axes survived cryopreservation. Occurrence of a glass transition upon warming was not a condition for axes to survive liquid nitrogen exposure. In untreated axes, glucose, increased with desiccation to 0.2 mg H2O/mg dry mass, and decreased as the axes were desiccated to lower water contents. Fructose and sucrose levels did not increase when untreated samples were desiccated for the same periods of time. Raffinose and stachyose levels decreased as untreated and precultured embryonic axes were desiccated. In sucrose precultured axes, sucrose and fructose levels increased when they were dehydrated, reaching maximum levels at 0.2 mg H2O/mg dry mass. Tissue glucose did not change significantly with desiccation. Raffinose and stachyose levels dropped as precultured embryonic axes were dried.

Distribution functions of sections and projections of convex bodies

OpenAIRE

Kim, Jaegil; Yaskin, Vladyslav; Zvavitch, Artem

2015-01-01

Typically, when we are given the section (or projection) function of a convex body, it means that in each direction we know the size of the central section (or projection) perpendicular to this direction. Suppose now that we can only get the information about the sizes of sections (or projections), and not about the corresponding directions. In this paper we study to what extent the distribution function of the areas of central sections (or projections) of a convex body can be used to derive ...

Neolithic Ground Axe-heads and Monuments in Wessex

Directory of Open Access Journals (Sweden)

David Field

2009-09-01

Full Text Available While central southern England is well known for its extant Neolithic monuments and for the fine artefacts recovered from some of its Bronze Age barrows, Neolithic artefacts from the region have received relatively little attention. This might be considered surprising, as the area not only witnessed some of the earliest investigations into the source of materials, notably the Stonehenge bluestones, but it also harbours some of the earliest dated ground axes in the country. This article examines the occurrence and distribution of ground axes found in Wessex when compared to other artefact types, but, more importantly, comparison with the location of extant monuments allows a rather different view of Wessex to emerge. The article will consider the influence of local resources, of flint mines such as those at Durrington, Easton Down and Porton Down in Wiltshire, and the extent and processes by which axes of non-local materials may have been introduced and dispersed across the landscape.

A study of ion channeling patterns at minor axes in silicon

International Nuclear Information System (INIS)

Motapothula, M.; Dang, Z.Y.; Venkatesan, T.; Breese, M.B.H.

2014-01-01

We present a comprehensive study of channeling patterns showing the angular distributions of 2 MeV protons which are transmitted through a 55 nm thick [0 0 1] silicon membrane along, and close to major and minor axes. The use of such ultra-thin membranes allows the relationship between aligned and tilted patterns to be clearly observed and a correlation made between lattice geometry and pattern distribution across many axes. We study the effect of minor planes {1 1 n} (n odd) at axes which they intersect, where their changing lattice geometry results in a variety of effects. The origin of these patterns is studied with Monte Carlo simulations and we show how one may interpret aspects of the observed patterns to determine the corresponding lattice arrangement. At axes which have a single spacing between atom rows produce the well-known ‘doughnut’ distribution at small axial tilts. In comparison, axes which incorporate atom rows with a different spacing or geometry produce more complex channeling patterns which exhibit a secondary, inner feature produced by beam incident on these rows

Multi-view collimator for scintillation cameras

International Nuclear Information System (INIS)

Hatton, J.; Grenier, R.P.

1979-01-01

A collimator comprises a block or blocks of radiation-impervious material which defines a first plurality of parallel channels, each channel defining a direction of acceptance of radiation from a body. The axes of a second plurality channels define another direction of acceptance of radiation from the body and intersect the same portion of the body as the axes of the first plurality of channels thus producing a second view of the body. Where the collimator is built up as a stack of blocks, each pair of adjacent blocks defines a slice of the body which is viewed from two angles defined by the channels. (UK)

33 CFR 149.412 - How many fire axes are needed?

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false How many fire axes are needed? 149.412 Section 149.412 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... Protection Equipment Firefighting Requirements § 149.412 How many fire axes are needed? Each manned deepwater...

Analogies between oscillation and rotation of bodies induced or influenced by vortex shedding

Science.gov (United States)

Lugt, H. J.

Vortex-induced or vortex-influenced rotation and oscillation of bodies in a parallel flow are discussed. A steady flow occurs if the body axis is parallel to the flow or if the axis of rotation is perpendicular to the flow. Flows around an oscillating body are quasi-steady only if the Strougal number is much smaller than unity. The connection between rotation and oscillation is demonstrated in terms of the autorotation of a Lanchester propeller, and conditions for stable autorotation are defined. The Riabouchinsky curve is shown to be typical of forces and torques on bodies with vortical wakes, including situations with fixed body axes perpendicular to the flow. A differential equation is formulated for rotational and oscillating bodies that shed vortices by extending the pendulum equation to include vortical effects expressed as a fifth-order polynomial.

On polars of mixed projection bodies

Science.gov (United States)

Zhao, Chang-Jian; Leng, Gang-Song

2006-04-01

Recently, Lutwak established general Minkowski inequality, Brunn-Minkowski inequality and Aleksandrov-Fenchel inequality for mixed projection bodies. In this paper, following Lutwak, we established their polar forms. As applications, we prove some interrelated results.

ROTAX: a nonlinear optimization program by axes rotation method

International Nuclear Information System (INIS)

Suzuki, Tadakazu

1977-09-01

A nonlinear optimization program employing the axes rotation method has been developed for solving nonlinear problems subject to nonlinear inequality constraints and its stability and convergence efficiency were examined. The axes rotation method is a direct search of the optimum point by rotating the orthogonal coordinate system in a direction giving the minimum objective. The searching direction is rotated freely in multi-dimensional space, so the method is effective for the problems represented with the contours having deep curved valleys. In application of the axes rotation method to the optimization problems subject to nonlinear inequality constraints, an improved version of R.R. Allran and S.E.J. Johnsen's method is used, which deals with a new objective function composed of the original objective and a penalty term to consider the inequality constraints. The program is incorporated in optimization code system SCOOP. (auth.)

Determination of cell division axes in the early embryogenesis of Caenorhabditis elegans

OpenAIRE

1987-01-01

The establishment of cell division axes was examined in the early embryonic divisions of Caenorhabditis elegans. It has been shown previously that there are two different patterns of cleavage during early embryogenesis. In one set of cells, which undergo predominantly determinative divisions, the division axes are established successively in the same orientation, while division axes in the other set, which divide mainly proliferatively, have an orthogonal pattern of division. We have investig...

Project Sekwa: A variable stability, blended-wing-body, research UAV

CSIR Research Space (South Africa)

Broughton, BA

2008-10-01

Full Text Available of flying wing and Blended-Wing-Body (BWB) platforms. The main objective of the project was to investigate the advantages and pitfalls of relaxing the longitudinal stability criteria on a Blended-Wing-Body UAV. The project was also aimed at expanding...

Observations on in vitro behaviour of the zygotic axes of fluted ...

African Journals Online (AJOL)

Systemic infection of seeds from field led to frequent and high microbial ... Axes greened under low light intensity and root growth was dependent on the ... In general, zygotic axes of the plant are easy to grow in vitro under a range of nutrient ...

Organization of Valence-Encoding and Projection-Defined Neurons in the Basolateral Amygdala

Directory of Open Access Journals (Sweden)

Anna Beyeler

2018-01-01

Full Text Available The basolateral amygdala (BLA mediates associative learning for both fear and reward. Accumulating evidence supports the notion that different BLA projections distinctly alter motivated behavior, including projections to the nucleus accumbens (NAc, medial aspect of the central amygdala (CeM, and ventral hippocampus (vHPC. Although there is consensus regarding the existence of distinct subsets of BLA neurons encoding positive or negative valence, controversy remains regarding the anatomical arrangement of these populations. First, we map the location of more than 1,000 neurons distributed across the BLA and recorded during a Pavlovian discrimination task. Next, we determine the location of projection-defined neurons labeled with retrograde tracers and use CLARITY to reveal the axonal path in 3-dimensional space. Finally, we examine the local influence of each projection-defined populations within the BLA. Understanding the functional and topographical organization of circuits underlying valence assignment could reveal fundamental principles about emotional processing.

Optical properties of alpha spodumene: Orientation of its principal optical axes

Energy Technology Data Exchange (ETDEWEB)

Souza, S O; Lima, A F [Universidade Federal de Sergipe, Departamento de Fisica, PO Box 353, 49100-000 Sao Cristovao - SE (Brazil); Lalic, M V, E-mail: mlalic@fisica.ufs.b

2009-05-01

We studied the orientation of the three orthogonal principal optical axes of the alpha spodumene crystal. This orientation is determined relative to the crystallographic axes, and expressed as function of the incident radiation wavelength in ultraviolent region. The calculations were performed by density functional theory based, full potential augmented plane wave method.

Traveller: An Interactive Cultural Training System Controlled by User-Defined Body Gestures

NARCIS (Netherlands)

Kistler, F.; André, E.; Mascarenhas, S.; Silva, A.; Paiva, A.; Degens, D.M.; Hofstede, G.J.; Krumhuber, E.; Kappas, A.; Aylett, R.

2013-01-01

In this paper, we describe a cultural training system based on an interactive storytelling approach and a culturally-adaptive agent architecture, for which a user-defined gesture set was created. 251 full body gestures by 22 users were analyzed to find intuitive gestures for the in-game actions in

Effect of alignment of easy axes on dynamic magnetization of immobilized magnetic nanoparticles

Science.gov (United States)

Yoshida, Takashi; Matsugi, Yuki; Tsujimura, Naotaka; Sasayama, Teruyoshi; Enpuku, Keiji; Viereck, Thilo; Schilling, Meinhard; Ludwig, Frank

2017-04-01

In some biomedical applications of magnetic nanoparticles (MNPs), the particles are physically immobilized. In this study, we explore the effect of the alignment of the magnetic easy axes on the dynamic magnetization of immobilized MNPs under an AC excitation field. We prepared three immobilized MNP samples: (1) a sample in which easy axes are randomly oriented, (2) a parallel-aligned sample in which easy axes are parallel to the AC field, and (3) an orthogonally aligned sample in which easy axes are perpendicular to the AC field. First, we show that the parallel-aligned sample has the largest hysteresis in the magnetization curve and the largest harmonic magnetization spectra, followed by the randomly oriented and orthogonally aligned samples. For example, 1.6-fold increase was observed in the area of the hysteresis loop of the parallel-aligned sample compared to that of the randomly oriented sample. To quantitatively discuss the experimental results, we perform a numerical simulation based on a Fokker-Planck equation, in which probability distributions for the directions of the easy axes are taken into account in simulating the prepared MNP samples. We obtained quantitative agreement between experiment and simulation. These results indicate that the dynamic magnetization of immobilized MNPs is significantly affected by the alignment of the easy axes.

Strategické řízení značky AXE.

OpenAIRE

Sedláková, Zuzana

2009-01-01

The thesis analyses marketing strategy of Axe brand which belongs to portfolio of brands of Unilever. Theoretic part contains basic information about issues connected to brand such as it's importance, basic concepts and building brand's value. Particular sections include the questions of marketing management and marketing mix. The aplicational part introduces the market od deodorants and basic trends on this market. This part describes the strategy of Axe in Czech Republic and the market wher...

Effect of alignment of easy axes on dynamic magnetization of immobilized magnetic nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Yoshida, Takashi, E-mail: t_yoshi@ees.kyushu-u.ac.jp [Department of Electrical and Electronic Engineering, Kyushu University, Fukuoka 819-0395 (Japan); Matsugi, Yuki; Tsujimura, Naotaka; Sasayama, Teruyoshi; Enpuku, Keiji [Department of Electrical and Electronic Engineering, Kyushu University, Fukuoka 819-0395 (Japan); Viereck, Thilo; Schilling, Meinhard; Ludwig, Frank [Institut für Elektrische Messtechnik und Grundlagen der Elektrotechnik, TU Braunschweig, Braunschweig 38106 (Germany)

2017-04-01

In some biomedical applications of magnetic nanoparticles (MNPs), the particles are physically immobilized. In this study, we explore the effect of the alignment of the magnetic easy axes on the dynamic magnetization of immobilized MNPs under an AC excitation field. We prepared three immobilized MNP samples: (1) a sample in which easy axes are randomly oriented, (2) a parallel-aligned sample in which easy axes are parallel to the AC field, and (3) an orthogonally aligned sample in which easy axes are perpendicular to the AC field. First, we show that the parallel-aligned sample has the largest hysteresis in the magnetization curve and the largest harmonic magnetization spectra, followed by the randomly oriented and orthogonally aligned samples. For example, 1.6-fold increase was observed in the area of the hysteresis loop of the parallel-aligned sample compared to that of the randomly oriented sample. To quantitatively discuss the experimental results, we perform a numerical simulation based on a Fokker-Planck equation, in which probability distributions for the directions of the easy axes are taken into account in simulating the prepared MNP samples. We obtained quantitative agreement between experiment and simulation. These results indicate that the dynamic magnetization of immobilized MNPs is significantly affected by the alignment of the easy axes. - Highlights: • We clarify how the alignment of easy axis of MNP affects the AC magnetization. • Parallel-aligned immobilized MNPs exhibit the largest AC hysteresis loop. • Parallel-aligned immobilized MNPs exhibit the largest harmonic magnetization spectra. • The AC magnetization is strongly affected by the alignment of the easy axes.

Engaging stakeholder communities as body image intervention partners: The Body Project as a case example.

Science.gov (United States)

Becker, Carolyn Black; Perez, Marisol; Kilpela, Lisa Smith; Diedrichs, Phillippa C; Trujillo, Eva; Stice, Eric

2017-04-01

Despite recent advances in developing evidence-based psychological interventions, substantial changes are needed in the current system of intervention delivery to impact mental health on a global scale (Kazdin & Blase, 2011). Prevention offers one avenue for reaching large populations because prevention interventions often are amenable to scaling-up strategies, such as task-shifting to lay providers, which further facilitate community stakeholder partnerships. This paper discusses the dissemination and implementation of the Body Project, an evidence-based body image prevention program, across 6 diverse stakeholder partnerships that span academic, non-profit and business sectors at national and international levels. The paper details key elements of the Body Project that facilitated partnership development, dissemination and implementation, including use of community-based participatory research methods and a blended train-the-trainer and task-shifting approach. We observed consistent themes across partnerships, including: sharing decision making with community partners, engaging of community leaders as gatekeepers, emphasizing strengths of community partners, working within the community's structure, optimizing non-traditional and/or private financial resources, placing value on cost-effectiveness and sustainability, marketing the program, and supporting flexibility and creativity in developing strategies for evolution within the community and in research. Ideally, lessons learned with the Body Project can be generalized to implementation of other body image and eating disorder prevention programs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Quality control methods for linear accelerator radiation and mechanical axes alignment.

Science.gov (United States)

Létourneau, Daniel; Keller, Harald; Becker, Nathan; Amin, Md Nurul; Norrlinger, Bernhard; Jaffray, David A

2018-06-01

The delivery accuracy of highly conformal dose distributions generated using intensity modulation and collimator, gantry, and couch degrees of freedom is directly affected by the quality of the alignment between the radiation beam and the mechanical axes of a linear accelerator. For this purpose, quality control (QC) guidelines recommend a tolerance of ±1 mm for the coincidence of the radiation and mechanical isocenters. Traditional QC methods for assessment of radiation and mechanical axes alignment (based on pointer alignment) are time consuming and complex tasks that provide limited accuracy. In this work, an automated test suite based on an analytical model of the linear accelerator motions was developed to streamline the QC of radiation and mechanical axes alignment. The proposed method used the automated analysis of megavoltage images of two simple task-specific phantoms acquired at different linear accelerator settings to determine the coincidence of the radiation and mechanical isocenters. The sensitivity and accuracy of the test suite were validated by introducing actual misalignments on a linear accelerator between the radiation axis and the mechanical axes using both beam steering and mechanical adjustments of the gantry and couch. The validation demonstrated that the new QC method can detect sub-millimeter misalignment between the radiation axis and the three mechanical axes of rotation. A displacement of the radiation source of 0.2 mm using beam steering parameters was easily detectable with the proposed collimator rotation axis test. Mechanical misalignments of the gantry and couch rotation axes of the same magnitude (0.2 mm) were also detectable using the new gantry and couch rotation axis tests. For the couch rotation axis, the phantom and test design allow detection of both translational and tilt misalignments with the radiation beam axis. For the collimator rotation axis, the test can isolate the misalignment between the beam radiation axis

The body project 4 all: A pilot randomized controlled trial of a mixed-gender dissonance-based body image program.

Science.gov (United States)

Kilpela, Lisa Smith; Blomquist, Kerstin; Verzijl, Christina; Wilfred, Salomé; Beyl, Robbie; Becker, Carolyn Black

2016-06-01

The Body Project is a cognitive dissonance-based body image improvement program with ample research support among female samples. More recently, researchers have highlighted the extent of male body dissatisfaction and disordered eating behaviors; however, boys/men have not been included in the majority of body image improvement programs. This study aims to explore the efficacy of a mixed-gender Body Project compared with the historically female-only body image intervention program. Participants included male and female college students (N = 185) across two sites. We randomly assigned women to a mixed-gender modification of the two-session, peer-led Body Project (MG), the two-session, peer-led, female-only (FO) Body Project, or a waitlist control (WL), and men to either MG or WL. Participants completed self-report measures assessing negative affect, appearance-ideal internalization, body satisfaction, and eating disorder pathology at baseline, post-test, and at 2- and 6-month follow-up. Linear mixed effects modeling to estimate the change from baseline over time for each dependent variable across conditions were used. For women, results were mixed regarding post-intervention improvement compared with WL, and were largely non-significant compared with WL at 6-month follow-up. Alternatively, results indicated that men in MG consistently improved compared with WL through 6-month follow-up on all measures except negative affect and appearance-ideal internalization. Results differed markedly between female and male samples, and were more promising for men than for women. Various explanations are provided, and further research is warranted prior to drawing firm conclusions regarding mixed-gender programming of the Body Project. © 2016 Wiley Periodicals, Inc.(Int J Eat Disord 2016; 49:591-602). © 2016 Wiley Periodicals, Inc.

Mixing on a spherical shell by cutting and shuffling with non-orthogonal rotation axes

Science.gov (United States)

Lynn, Thomas; Umbanhowar, Paul; Ottino, Julio; Lueptow, Richard

2017-11-01

We examine a dynamical system that models the mixing of granular material in a half-filled spherical tumbler rotated about two horizontal alternating axes by using the machinery of cutting and shuffling through piecewise-isometries (PWI). Previous restrictions on how the domain is cut and shuffled are relaxed to allow non-orthogonal axes of rotation. Mixing is not only dependent on the amount of rotation used to induce mixing, but also on the relative orientation of the rotation axes. Well mixed regions within the PWI, which have a high density of cuts, typically interact with the periodic cutting boundary for both rotation axes. However, there are parameter combinations where the two rotations cut distinctly separate regions. The three-parameter space (a rotation about each axis and the relative orientation of the axes) is rich with detailed mixing features such as fractal boundaries and elliptic-like non-mixing regions. Supported by National Science Foundation Grant No. CMMI-1435065.

Optimum body size of Holstein replacement heifers.

Science.gov (United States)

Hoffman, P C

1997-03-01

Criteria that define optimum body size of replacement heifers are required by commercial dairy producers to evaluate replacement heifer management programs. Historically recommended body size criteria have been based on live BW measurements. Numerous research studies have observed a positive relationship between BW at first calving and first lactation milk yield, which has served as the impetus for using live BW to define body size of replacement heifers. Live BW is, however, not the only available measurement to define body size. Skeletal measurements such as wither height, length, and pelvic area have been demonstrated to be related to first lactation performance and (or) dystocia. Live BW measurements also do not define differences in body composition. Differences in body composition of replacement heifers at first calving are also related to key performance variables. An updated research data base is available for the modern Holstein genotype to incorporate measures of skeletal growth and body composition with BW when defining body size. These research projects also lend insight into the relative importance of measurements that define body size of replacement heifers. Incorporation of these measurements from current research into present BW recommendations should aid commercial dairy producers to better define replacement heifer growth and management practices. This article proposes enhancements in defining optimum body size and growth characteristics of Holstein replacement heifers.

Becoming a Heavily Tattooed Young Body: From a Bodily Experience to a Body Project

Science.gov (United States)

Ferreira, Vitor Sérgio

2014-01-01

Why some young people start to tattoo their bodies? And why some of them keep going on with this practice, until having all body tattooed? What doing so means to them? These are some of the questions that underlie a qualitative research project carried out in Portugal on heavily tattooed young people. In this article, the author discusses their…

Secure Intra-Body Wireless Communications (SIWiC) System Project

Science.gov (United States)

Ahmad, Aftab; Doggett, Terrence P.

2011-01-01

SIWiC System is a project to investigate, design and implement future wireless networks of implantable sensors in the body. This futuristic project is designed to make use of the emerging and yet-to-emerge technologies, including ultra-wide band (UWB) for wireless communications, smart implantable sensors, ultra low power networking protocols, security and privacy for bandwidth and power deficient devices and quantum computing. Progress in each of these fronts is hindered by the needs of breakthrough. But, as we will see in this paper, these major challenges are being met or will be met in near future. SIWiC system is a network of in-situ wireless devices that are implanted to coordinate sensed data inside the body, such as symptoms monitoring collected internally, or biometric data collected of an outside object from within the intra-body network. One node has the capability of communicating outside the body to send data or alarm to a relevant authority, e.g., a remote physician.

A survey of formal methods for determining functional joint axes.

Science.gov (United States)

Ehrig, Rainald M; Taylor, William R; Duda, Georg N; Heller, Markus O

2007-01-01

Axes of rotation e.g. at the knee, are often generated from clinical gait analysis data to be used in the assessment of kinematic abnormalities, the diagnosis of disease, or the ongoing monitoring of a patient's condition. They are additionally used in musculoskeletal models to aid in the description of joint and segment kinematics for patient specific analyses. Currently available methods to describe joint axes from segment marker positions share the problem that when one segment is transformed into the coordinate system of another, artefacts associated with motion of the markers relative to the bone can become magnified. In an attempt to address this problem, a symmetrical axis of rotation approach (SARA) is presented here to determine a unique axis of rotation that can consider the movement of two dynamic body segments simultaneously, and then compared its performance in a survey against a number of previously proposed techniques. Using a generated virtual joint, with superimposed marker error conditions to represent skin movement artefacts, fitting methods (geometric axis fit, cylinder axis fit, algebraic axis fit) and transformation techniques (axis transformation technique, mean helical axis, Schwartz approach) were classified and compared with the SARA. Nearly all approaches were able to estimate the axis of rotation to within an RMS error of 0.1cm at large ranges of motion (90 degrees ). Although the geometric axis fit produced the least RMS error of approximately 1.2 cm at lower ranges of motion (5 degrees ) with a stationary axis, the SARA and Axis Transformation Technique outperformed all other approaches under the most demanding marker artefact conditions for all ranges of motion. The cylinder and algebraic axis fit approaches were unable to compute competitive AoR estimates. Whilst these initial results using the SARA are promising and are fast enough to be determined "on-line", the technique must now be proven in a clinical environment.

Written on the Body

DEFF Research Database (Denmark)

Christiansen, Steen Ledet

Our bodies define a border between ourselves and the world around us. However we might feel about our body, it is what we present to the world. Victoria L. Blum in her book Flesh Wounds discusses how bodies are a form of inkblots, where discontent is projected onto. As bodies can be modified, we...... may choose to alter how we are perceived and to at least some extent control the discontent we may project onto our own body. Through body modification, we can alter the impression of our personality and express a cultural solidarity, as Chris Rojek points out. Tattoos, piercings and other body...... modifications become ways to express a difference from or identification with, a particular cultural segment. Body modification marks a personal subjectivity, just as it marks a border around those who participate. A distinctive bodily border is formed through the use of body modifications, and it can be viewed...

Ecological economics and literary communication: Axes of discourse ...

African Journals Online (AJOL)

Ecological economics and literary communication: Axes of discourse in Ifeanyi Izuka's Travails of the black gold. ... and environmental messages that affect the econiche, and for exploring human conditions and values as characters react to extraordinary economic and ecological situations that have universal application.

Defining and implementing a model for pharmacy resident research projects

Directory of Open Access Journals (Sweden)

Dick TB

2015-09-01

Full Text Available Objective: To describe a standard approach to provide a support structure for pharmacy resident research that emphasizes self-identification of a residency research project. Methods: A subcommittee of the residency advisory committee was formed at our institution. The committee was initially comprised of 2 clinical pharmacy specialists, 1 drug information pharmacist, and 2 pharmacy administrators. The committee developed research guidelines that are distributed to residents prior to the residency start that detail the research process, important deadlines, and available resources. Instructions for institutional review board (IRB training and deadlines for various assignments and presentations throughout the residency year are clearly defined. Residents conceive their own research project and emphasis is placed on completing assignments early in the residency year. Results: In the 4 years this research process has been in place, 15 of 16 (94% residents successfully identified their own research question. All 15 residents submitted a complete research protocol to the IRB by the August deadline. Four residents have presented the results of their research at multi-disciplinary national professional meetings and 1 has published a manuscript. Feedback from outgoing residents has been positive overall and their perceptions of their research projects and the process are positive. Conclusion: Pharmacy residents selecting their own research projects for their residency year is a feasible alternative to assigning or providing lists of research projects from which to select a project.

Image fusion between whole body FDG PET images and whole body MRI images using a full-automatic mutual information-based multimodality image registration software

International Nuclear Information System (INIS)

Uchida, Yoshitaka; Nakano, Yoshitada; Fujibuchi, Toshiou; Isobe, Tomoko; Kazama, Toshiki; Ito, Hisao

2006-01-01

We attempted image fusion between whole body PET and whole body MRI of thirty patients using a full-automatic mutual information (MI) -based multimodality image registration software and evaluated accuracy of this method and impact of the coregistrated imaging on diagnostic accuracy. For 25 of 30 fused images in body area, translating gaps were within 6 mm in all axes and rotating gaps were within 2 degrees around all axes. In head and neck area, considerably much gaps caused by difference of head inclination at imaging occurred in 16 patients, however these gaps were able to decrease by fused separately. In 6 patients, diagnostic accuracy using PET/MRI fused images was superior compared by PET image alone. This work shows that whole body FDG PET images and whole body MRI images can be automatically fused using MI-based multimodality image registration software accurately and this technique can add useful information when evaluating FDG PET images. (author)

Transitions in students’ epistemic framing along two axes

Directory of Open Access Journals (Sweden)

Paul W. Irving

2013-04-01

Full Text Available We use epistemological framing to interpret participants’ behavior during group problem-solving sessions in an intermediate mechanics course. We are interested in how students frame discussion and in how the groups shift discussion framings. Our analysis includes two framing axes, expansive vs narrow and serious vs silly, which together incorporate and extend prior work on how students frame discussions in physics education research. We present markers for where discussion falls on these axes. We support our conclusions with both microanalytic excerpts of discussion and overall analysis of 75 hours of video-based data. We find that the group spends most of its time in more serious framings, and slightly more than half of its time in more narrow ones. The teaching assistant is the participant who initiates the largest number of frame shifts, and her shifts include bids to all quadrants in the expansive or narrow and serious or silly plane.

The earth's equatorial principal axes and moments of inertia

Science.gov (United States)

Liu, H. S.; Chao, B. F.

1991-01-01

The earth's equatorial principal moments of inertia are given as A and B, where A is less than B, and the corresponding principal axes are given as a and b. Explicit formulas are derived for determining the orientation of a and b axes and the difference B - A using C(22) and S(22), the two gravitational harmonic coefficients of degree 2 and order 2. For the earth, the a axis lies along the (14.93 deg W, 165.07 deg E) diameter, and the b axis lies perpendicular to it along the (75.07 deg E, 104.93 deg W) diameter. The difference B - A is 7.260 x 10 to the -6th MR2. These quantities for other planets are contrasted, and geophysical implications are discussed.

Transitions in Students' Epistemic Framing along Two Axes

Science.gov (United States)

Irving, Paul W.; Martinuk, Mathew Sandy; Sayre, Eleanor C.

2013-01-01

We use epistemological framing to interpret participants' behavior during group problem-solving sessions in an intermediate mechanics course. We are interested in how students frame discussion and in how the groups shift discussion framings. Our analysis includes two framing axes, expansive vs narrow and serious vs silly, which together…

Visual perception of axes of head rotation

Science.gov (United States)

Arnoldussen, D. M.; Goossens, J.; van den Berg, A. V.

2013-01-01

Registration of ego-motion is important to accurately navigate through space. Movements of the head and eye relative to space are registered through the vestibular system and optical flow, respectively. Here, we address three questions concerning the visual registration of self-rotation. (1) Eye-in-head movements provide a link between the motion signals received by sensors in the moving eye and sensors in the moving head. How are these signals combined into an ego-rotation percept? We combined optic flow of simulated forward and rotational motion of the eye with different levels of eye-in-head rotation for a stationary head. We dissociated simulated gaze rotation and head rotation by different levels of eye-in-head pursuit. We found that perceived rotation matches simulated head- not gaze-rotation. This rejects a model for perceived self-rotation that relies on the rotation of the gaze line. Rather, eye-in-head signals serve to transform the optic flow's rotation information, that specifies rotation of the scene relative to the eye, into a rotation relative to the head. This suggests that transformed visual self-rotation signals may combine with vestibular signals. (2) Do transformed visual self-rotation signals reflect the arrangement of the semi-circular canals (SCC)? Previously, we found sub-regions within MST and V6+ that respond to the speed of the simulated head rotation. Here, we re-analyzed those Blood oxygenated level-dependent (BOLD) signals for the presence of a spatial dissociation related to the axes of visually simulated head rotation, such as have been found in sub-cortical regions of various animals. Contrary, we found a rather uniform BOLD response to simulated rotation along the three SCC axes. (3) We investigated if subject's sensitivity to the direction of the head rotation axis shows SCC axes specifcity. We found that sensitivity to head rotation is rather uniformly distributed, suggesting that in human cortex, visuo-vestibular integration is

Visual perception of axes of head rotation

Directory of Open Access Journals (Sweden)

David Mattijs Arnoldussen

2013-02-01

Full Text Available Registration of ego-motion is important to accurately navigate through space. Movements of the head and eye relative to space are registered through the vestibular system and optical flow, respectively. Here, we address three questions concerning the visual registration of self-rotation. 1. Eye-in-head movements provide a link between the motion signals received by sensors in the moving eye and sensors in the moving head. How are these signals combined into an ego-rotation percept? We combined optic flow of simulated forward and rotational motion of the eye with different levels of eye-in-head rotation for a stationary head. We dissociated simulated gaze rotation and head rotation by different levels of eye-in-head pursuit.We found that perceived rotation matches simulated head- not gaze-rotation. This rejects a model for perceived self-rotation that relies on the rotation of the gaze line. Rather, eye-in-head signals serve to transform the optic flow’s rotation information, that specifies rotation of the scene relative to the eye, into a rotation relative to the head. This suggests that transformed visual self-rotation signals may combine with vestibular signals.2. Do transformed visual self-rotation signals reflect the arrangement of the semicircular canals (SCC? Previously, we found sub-regions within MST and V6+ that respond to the speed of the simulated head rotation. Here, we re-analyzed those BOLD signals for the presence of a spatial dissociation related to the axes of visually simulated head rotation, such as have been found in sub-cortical regions of various animals. Contrary, we found a rather uniform BOLD response to simulated rotation along the three SCC axes.3. We investigated if subject’s sensitivity to the direction of the head rotation axis shows SCC axes specifcity. We found that sensitivity to head rotation is rather uniformly distributed, suggesting that in human cortex, visuo-vestibular integration is not arranged into

5-axes modular CNC machining center

Directory of Open Access Journals (Sweden)

Breaz Radu-Eugen

2017-01-01

Full Text Available The paper presents the development of a 5-axes CNC machining center. The main goal of the machine was to provide the students a practical layout for training in advanced CAM techniques. The mechanical structure of the machine was built in a modular way by a specialized company, which also implemented the CNC controller. The authors of this paper developed the geometric and kinematic model of the CNC machining center and the post-processor, in order to use the machine in a CAM environment.

Initiating Knowledge Management Project in a Regulatory Body in Thailand

International Nuclear Information System (INIS)

Pakdee, K.; Apichaibukol, A.

2016-01-01

Full text: Thailand is one of countries that have adopted the use of nuclear technology in various applications such as medical, agricultural, industrial and research applications. Recognizing this enormous potential in many applications, the Office of Atoms for Peace (OAP) as a regulatory body under the Ministry of Science and Technology, carries out a variety of activities to disseminate and promote youth, entrepreneurs and public on the awareness of the atomic energy in Thailand. In recent years, “knowledge management” is one of the key factors that contribute to safe, secure and efficient operation of nuclear activities and facilities but also for the regulatory processes as well. In this regards, the OAP is aware and recognize of the importance of studying and initiating nuclear knowledge and human resource development programme in the regulatory body. Even though, the OAP has been initiating the project on nuclear knowledge and human resources for several years but the present status of the projects still remain in primarily stage of the initiating. This paper describes the initiating of nuclear knowledge in the past and present status for knowledge management project in regulatory body in Thailand. (author

Solid state controller three axes controller

Science.gov (United States)

Bailey, C. L., Jr. (Inventor)

1973-01-01

The reported flight controller features a handle grip which is mounted on a longitudinally extending control element. The handle grip is pivotally mounted on the control element about a pitch axis which is perpendicular to the longitudinal axis through the control element. The pivotal mounting includes a resilient force mounting mechanism which centers the grip relative to the control element. Rotation of the handle grip produces a direct rotation of a transducer element in a transducer which provides an electrical indication of the rotative movement about three mutually perpendicular axes.

Cybersickness in the presence of scene rotational movements along different axes.

Science.gov (United States)

Lo, W T; So, R H

2001-02-01

Compelling scene movements in a virtual reality (VR) system can cause symptoms of motion sickness (i.e., cybersickness). A within-subject experiment has been conducted to investigate the effects of scene oscillations along different axes on the level of cybersickness. Sixteen male participants were exposed to four 20-min VR simulation sessions. The four sessions used the same virtual environment but with scene oscillations along different axes, i.e., pitch, yaw, roll, or no oscillation (speed: 30 degrees/s, range: +/- 60 degrees). Verbal ratings of the level of nausea were taken at 5-min intervals during the sessions and sickness symptoms were also measured before and after the sessions using the Simulator Sickness Questionnaire (SSQ). In the presence of scene oscillation, both nausea ratings and SSQ scores increased at significantly higher rates than with no oscillation. While individual participants exhibited different susceptibilities to nausea associated with VR simulation containing scene oscillations along different rotational axes, the overall effects of axis among our group of 16 randomly selected participants were not significant. The main effects of, and interactions among, scene oscillation, duration, and participants are discussed in the paper.

Design of a Low-Cost 2-Axes Fluxgate Magnetometer for Small Satellite Applications

Directory of Open Access Journals (Sweden)

Su-Jeoung Kim

2005-03-01

Full Text Available This paper addresses the design and analysis results of a 2-axes magnetometer for attitude determination of small satellite. A low-cost and efficient 2-axes fluxgate magnetometer was selected as the most suitable attitude sensor for LEO microsatellites which require a low-to-medium level pointing accuracy. An optimization trade-off study has been performed for the development of 2-axes fluxgate magnetometer. All the relevant parameters such as permeability, demagnetization factor, coil diameter, core thickness, and number of coil turns were considered for the sizing of a small satellite magnetometer. The magnetometer which is designed, manufactured, and tested in-house as described in this paper satisfies linearity requirement for determining attitude position of small satellites. On the basis of magnetometer which is designed in Space System Research Lab. (SSRL, commercial magnetometer will be developed.

[Recent contributions to the establishment of the axes of the mammalian embryo].

Science.gov (United States)

Catala, M

2002-06-01

The study of the establishment of embryonic axes during early development has shown that this process is a very early event (occurRing either during ovogenesis or during fertilization) for invertebrates and for lower vertebrates. In mammals, it was considered that this establishment appears late during development because of the great plasticity of blastomeres. Recent data in the mouse embryon show that the mammalian ovocyte is a polarized cell, the polar body corresponding to the animal pole of this cell. The blastomeres that are generated by the zygote divide asynchronously. The first that divides is the one which inherits the plasma cell membrane where fertilization takes place. This blastomere will preferentially give rise to the cells of the embryonic pole of the blastocyst whereas the other yields the cells of the abembryonic pole. The mammalian ovocyte is thus a polarized cell with an already established animal-vegetal axis. The point of sperm entry will determine the embryonic-abembryonic axis.

Equations of motion for free-flight systems of rotating-translating bodies

International Nuclear Information System (INIS)

Hodapp, A.E. Jr.

1976-09-01

General vector differential equations of motion are developed for a system of rotating-translating, unbalanced, constant mass bodies. Complete flexibility is provided in placement of the reference coordinates within the system of bodies and in placement of body fixed axes within each body. Example cases are presented to demonstrate the ease in reduction of these equations to the equations of motion for systems of interest

Crystallization and preliminary crystallographic analysis of Axe2, an acetylxylan esterase from Geobacillus stearothermophilus

International Nuclear Information System (INIS)

Lansky, Shifra; Alalouf, Onit; Solomon, Vered; Alhassid, Anat; Govada, Lata; Chayan, Naomi E.; Belrhali, Hassan; Shoham, Yuval; Shoham, Gil

2013-01-01

The serine acetylxylan esterase from G. stearothermophilus (Axe2) has been crystallized in the tetragonal space group I422. Complete diffraction data sets have been measured for the selenomethionine derivative (SAD data, 1.70 Å resolution) and the wild-type enzyme (1.85 Å resolution) to be used for a full three-dimensional structural analysis of the Axe2 protein. Acetylxylan esterases are part of the hemi-cellulolytic system of many microorganisms which utilize plant biomass for growth. Xylans, which are polymeric sugars that constitute a significant part of the plant biomass, are usually substituted with acetyl side groups attached at position 2 or 3 of the xylose backbone units. Acetylxylan esterases hydrolyse the ester linkages of the xylan acetyl groups and thus improve the ability of main-chain hydrolysing enzymes to break down the sugar backbone units. As such, these enzymes play an important part in the hemi-cellulolytic utilization system of many microorganisms that use plant biomass for growth. Interest in the biochemical characterization and structural analysis of these enzymes stems from their numerous potential biotechnological applications. An acetylxylan esterase (Axe2) of this type from Geobacillus stearothermophilus T-6 has recently been cloned, overexpressed, purified, biochemically characterized and crystallized. One of the crystal forms obtained (RB1) belonged to the tetragonal space group I422, with unit-cell parameters a = b = 110.2, c = 213.1 Å. A full diffraction data set was collected to 1.85 Å resolution from flash-cooled crystals of the wild-type enzyme at 100 K using synchrotron radiation. A selenomethionine derivative of Axe2 has also been prepared and crystallized for single-wavelength anomalous diffraction experiments. The crystals of the selenomethionine-derivatized Axe2 appeared to be isomorphous to those of the wild-type enzyme and enabled the measurement of a full 1.85 Å resolution diffraction data set at the selenium

An artist's perspective on body image, the media, and contemporary society.

Science.gov (United States)

Kirkwood, Larry

2005-01-01

The purpose of The Body Image Project is to help in the fight to change the way we look at ourselves and at others. By using the human body as subject matter, I am trying to focus on aesthetic appreciation of the human form and to deal with self-worth by exploring the concept of beauty. Unfortunately, our culture has become obsessed with the image and keeping up appearances. Furthermore, we are letting the so-called beauty industry and corporate America define reality for us, and encouraging body hatred is an extremely lucrative business. But there are more valid and health-promoting ways to define beauty and reality. We must educate ourselves to recognize that advertising is not a slice of reality. We need to quit giving other people permission to define who we are and what we are worth. We need to begin to see healthy bodies as the ideal, and we need to make clear that good health is not defined by size; it is a state of physical, mental, and social well-being. Change can happen, but it will take a concerted effort by many people. This project needs your help.

Bilaterally symmetric axes with rhizoids composed the rooting structure of the common ancestor of vascular plants.

Science.gov (United States)

Hetherington, Alexander J; Dolan, Liam

2018-02-05

There are two general types of rooting systems in extant land plants: gametophyte rhizoids and sporophyte root axes. These structures carry out the rooting function in the free-living stage of almost all land plant gametophytes and sporophytes, respectively. Extant vascular plants develop a dominant, free-living sporophyte on which roots form, with the exception of a small number of taxa that have secondarily lost roots. However, fossil evidence indicates that early vascular plants did not develop sporophyte roots. We propose that the common ancestor of vascular plants developed a unique rooting system-rhizoidal sporophyte axes. Here we present a synthesis and reinterpretation of the rootless sporophytes of Horneophyton lignieri , Aglaophyton majus , Rhynia gwynne-vaughanii and Nothia aphylla preserved in the Rhynie chert. We show that the sporophyte rooting structures of all four plants comprised regions of plagiotropic (horizontal) axes that developed unicellular rhizoids on their underside. These regions of axes with rhizoids developed bilateral symmetry making them distinct from the other regions which were radially symmetrical. We hypothesize that rhizoidal sporophyte axes constituted the rooting structures in the common ancestor of vascular plants because the phylogenetic positions of these plants span the origin of the vascular lineage.This article is part of a discussion meeting issue 'The Rhynie cherts: our earliest terrestrial ecosystem revisited'. © 2017 The Authors.

Analysis of movement axes of the ankle and subtalar joints: relationship with the articular surfaces of the talus.

Science.gov (United States)

Cho, Ho-Jung; Kwak, Dai-Soon; Kim, In-Beom

2014-10-01

Bone shape varies among human populations, and in the case of articular joints, the shape of the articulating surfaces strongly influences joint movement. In this study, we aimed to analyse the axes of the talocrural and subtalar joints, using the talar articular surface method, and compare these results with those of the previous studies. We used three-dimensional reconstruction models of tali among Korean individuals. The axes of the talocrural and subtalar joints were calculated by using the least-square sphere fitting method, and the principal axis was used for reference coordination. The shape of the talus was classified based on the shape of its anterior, middle, and posterior calcaneal facets, and the talar shape was compared with the movement axes. The movement axes did not differ according to the type of calcaneal facets of the talus. Interestingly, we also noted that the axes of the talocrural and subtalar joints in this study differed significantly from those reported in the previous studies; these differences may be due to variations in the shape of the bones. © IMechE 2014.

Observations on in vitro behaviour of the zygotic axes of fluted ...

African Journals Online (AJOL)

AJB SERVER

2006-08-03

Aug 3, 2006 ... 2School of Biological and Conservation Sciences, University of KwaZulu-Natal, Durban, 4041 South Africa. 3 International Plant ... orientation of the axes. ..... Therefore, techniques of .... Preparation and properties of flours and.

Cálculo de ejes y momentos principales de inercia. // The calculation of main axes and inertia momentum.

Directory of Open Access Journals (Sweden)

L. O’connor Montero

2001-07-01

Full Text Available Se describen cálculos clásicos para determinar ejes y momentos principales de inercia de un cuerpo, y se demuestra que sepueden realizar cálculos con el mismo propósito mediante la aplicación del Cálculo Tensorial, la Teoría Espectral y elAlgebra Lineal. Esto permite justificar los términos del título del trabajo constituye una extensión del modelo tensorial a laestática, que en correspondencia con los elementos que lo definen y según analogías con otras aplicaciones a la mecánicadan lugar a introducir la noción de tensor de inercia de un cuerpo. Bien interpretado, el modelo puede contribuir a cambiosimportantes en la enseñanza del álgebra en la Ingeniería.Palabras claves: Tensor, cálculo tensorial, ejes y momentos principales de inercia, tensor de inercia.________________________________________________________________________________Abstract.The tensors calculation and the spectral theory are applied to modelling the inertia state (main axes and momentum ofinertia of a body. This makes possible to enrich static engineering calculations and to generalise tensorial models beyondthe materials resistance, fluids mechanic and the plastic deformation theory. Well interpretated, the model can lead toimportant changes in algebra teaching for mechanical engineers.Key words: Tension member, tension calculation, inertia main axes , principals inertia momentum, inertiatension member.

Testing the assumption in ergonomics software that overall shoulder strength can be accurately calculated by treating orthopedic axes as independent.

Science.gov (United States)

Hodder, Joanne N; La Delfa, Nicholas J; Potvin, Jim R

2016-08-01

To predict shoulder strength, most current ergonomics software assume independence of the strengths about each of the orthopedic axes. Using this independent axis approach (IAA), the shoulder can be predicted to have strengths as high as the resultant of the maximum moment about any two or three axes. We propose that shoulder strength is not independent between axes, and propose an approach that calculates the weighted average (WAA) between the strengths of the axes involved in the demand. Fifteen female participants performed maximum isometric shoulder exertions with their right arm placed in a rigid adjustable brace affixed to a tri-axial load cell. Maximum exertions were performed in 24 directions, including four primary directions, horizontal flexion-extension, abduction-adduction, and at 15° increments in between those axes. Moments were computed and comparisons made between the experimentally collected strengths and those predicted by the IAA and WAA methods. The IAA over-predicted strength in 14 of 20 non-primary exertions directions, while the WAA underpredicted strength in only 2 of these directions. Therefore, it is not valid to assume that shoulder axes are independent when predicting shoulder strengths between two orthopedic axes, and the WAA is an improvement over current methods for the posture tested. Copyright © 2015 Elsevier Ltd. All rights reserved.

Computational nuclear quantum many-body problem: The UNEDF project

Science.gov (United States)

Bogner, S.; Bulgac, A.; Carlson, J.; Engel, J.; Fann, G.; Furnstahl, R. J.; Gandolfi, S.; Hagen, G.; Horoi, M.; Johnson, C.; Kortelainen, M.; Lusk, E.; Maris, P.; Nam, H.; Navratil, P.; Nazarewicz, W.; Ng, E.; Nobre, G. P. A.; Ormand, E.; Papenbrock, T.; Pei, J.; Pieper, S. C.; Quaglioni, S.; Roche, K. J.; Sarich, J.; Schunck, N.; Sosonkina, M.; Terasaki, J.; Thompson, I.; Vary, J. P.; Wild, S. M.

2013-10-01

The UNEDF project was a large-scale collaborative effort that applied high-performance computing to the nuclear quantum many-body problem. The primary focus of the project was on constructing, validating, and applying an optimized nuclear energy density functional, which entailed a wide range of pioneering developments in microscopic nuclear structure and reactions, algorithms, high-performance computing, and uncertainty quantification. UNEDF demonstrated that close associations among nuclear physicists, mathematicians, and computer scientists can lead to novel physics outcomes built on algorithmic innovations and computational developments. This review showcases a wide range of UNEDF science results to illustrate this interplay.

The test-retest reliability of anatomical co-ordinate axes definition for the quantification of lower extremity kinematics during running.

Science.gov (United States)

Sinclair, Jonathan; Taylor, Paul John; Greenhalgh, Andrew; Edmundson, Christopher James; Brooks, Darrell; Hobbs, Sarah Jane

2012-12-01

Three-dimensional (3-D) kinematic analyses are used widely in both sport and clinical examinations. However, this procedure depends on reliable palpation of anatomical landmarks and mal-positioning of markers between sessions may result in improperly defined segment co-ordinate system axes which will produce in-consistent joint rotations. This had led some to question the efficacy of this technique. The aim of the current investigation was to assess the reliability of the anatomical frame definition when quantifying 3-D kinematics of the lower extremities during running. Ten participants completed five successful running trials at 4.0 m·s(-1) ± 5%. 3-D angular joint kinematics parameters from the hip, knee and ankle were collected using an eight camera motion analysis system. Two static calibration trials were captured. The first (test) was conducted prior to the running trials following which anatomical landmarks were removed. The second was obtained following completion of the running trials where anatomical landmarks were re-positioned (retest). Paired samples t-tests were used to compare 3-D kinematic parameters quantified using the two static trials, and intraclass correlations were employed to examine the similarities between the sagittal, coronal and transverse plane waveforms. The results indicate that no significant (p>0.05) differences were found between test and retest 3-D kinematic parameters and strong (R(2)≥0.87) correlations were observed between test and retest waveforms. Based on the results obtained from this investigation, it appears that the anatomical co-ordinate axes of the lower extremities can be defined reliably thus confirming the efficacy of studies using this technique.

Undisturbed stance control in healthy adults is achieved differently along anteroposterior and mediolateral axes: evidence from visual feedback of various signals from center of pressure trajectories.

Science.gov (United States)

Rougier, Patrice R

2009-05-01

Provided through the screen of a monitor, the participant's resultant center of pressure (CPRes) movements from a force platform device, modified the postural performance of a healthy individual. However, these effects could largely vary with the axis that researchers consider (mediolateral [ML] or anteroposterior [AP]), because they know these controls are involved in 2 distinct ankle and hip mechanisms. To demonstrate this organization, the author tested a group of healthy adults in several conditions that gave the whole or some part of the information in the CPRes displacements. Compared with the CPRes feedback, left and right plantar CP or body weight distribution feedback deteriorated the control of the vertically projected center of gravity (CGv) along the ML and AP axes, whose amplitudes increased, respectively. These data highlight the primary role of loading or unloading and pressure variations in the achievement of postural control along each ML or AP axis, respectively. It is interesting that merging these 2 pieces of information (CPRes displacements) helped participants optimize their postural performance.

Cross-talk interactions of exogenous nitric oxide and sucrose modulates phenylpropanoid metabolism in yellow lupine embryo axes infected with Fusarium oxysporum.

Science.gov (United States)

Morkunas, Iwona; Formela, Magda; Floryszak-Wieczorek, Jolanta; Marczak, Łukasz; Narożna, Dorota; Nowak, Witold; Bednarski, Waldemar

2013-10-01

The aim of the study was to examine cross-talk of exogenous nitric oxide (NO) and sucrose in the mechanisms of synthesis and accumulation of isoflavonoids in embryo axes of Lupinus luteus L. cv. Juno. It was verified whether the interaction of these molecules can modulate the defense response of axes to infection and development of the pathogenic fungus Fusarium oxysporum f. sp. lupini. Sucrose alone strongly stimulated a high level of genistein glucoside in axes pretreated with exogenous nitric oxide (SNP or GSNO) and non-pretreated axes. As a result of amplification of the signal coming from sucrose and GSNO, high isoflavonoids accumulation was observed (+Sn+GSNO). It needs to be stressed that infection in tissues pretreated with SNP/GSNO and cultured on the medium with sucrose (+Si+SNP/+Si+GSNO) very strongly enhances the accumulation of free isoflavone aglycones. In +Si+SNP axes phenylalanine ammonia-lyase activity was high up to 72h. As early as at 12h in +Si+SNP axes an increase was recorded in gene expression level of the specific isoflavonoid synthesis pathway. At 24h in +Si+SNP axes a very high total antioxidant capacity dependent on the pool of fast antioxidants was noted. Post-infection generation of semiquinone radicals was lower in axes with a high level of sucrose than with a deficit. Copyright © 2013 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

TWO FACES OF MASCULINITY IN AXE CHOCOLATE ADVERTISEMENT

OpenAIRE

Bernadeta Ririn; Lulu Laela Amalia

2012-01-01

Abstract: An advertisement has never been departed from an ideology. Although it occurs implicitly, an ideology in an advertisement is able to make someone believe in particular value of life. This study tries to reveal the ideology both in positive meaning as a belief system which marks certain group and in negative meaning as a false consciousness. Besides that, this study also tries to reveal the way of illustrating the ideology that lies within the Axe Chocolate advertisement. In order to...

Self-defining future projections: exploring the identity function of thinking about the future.

Science.gov (United States)

D'Argembeau, Arnaud; Lardi, Claudia; Van der Linden, Martial

2012-01-01

The act of projecting oneself into meaningful future events may significantly contribute to a person's sense of self and identity. Yet if the role of memories, in particular self-defining memories (SDMs), in grounding the self is now well established, the identity function of anticipated future events has received comparatively little attention. This article introduces the construct of self-defining future projection (SDFP) to address this issue. Two studies show that people can readily identify significant future events that they frequently think about and that convey core information about who they are as individuals. Furthermore, a person's particular style of constructing SDMs is similarly manifested in SDFPs, suggesting that both types of events can be used to ground the self. Notably, people who display a stronger tendency to extract meaning from their past experiences also reflect more about the potential implications of imagined future events. The results further demonstrate that SDMs and SDFPs both give rise to a strong sense of personal continuity over time and are meaningfully related to self-esteem. Together these findings lend support to the idea that a person's sense of self and identity is in part nourished by the anticipation of significant future events.

Human vocal attractiveness as signaled by body size projection.

Directory of Open Access Journals (Sweden)

Yi Xu

Full Text Available Voice, as a secondary sexual characteristic, is known to affect the perceived attractiveness of human individuals. But the underlying mechanism of vocal attractiveness has remained unclear. Here, we presented human listeners with acoustically altered natural sentences and fully synthetic sentences with systematically manipulated pitch, formants and voice quality based on a principle of body size projection reported for animal calls and emotional human vocal expressions. The results show that male listeners preferred a female voice that signals a small body size, with relatively high pitch, wide formant dispersion and breathy voice, while female listeners preferred a male voice that signals a large body size with low pitch and narrow formant dispersion. Interestingly, however, male vocal attractiveness was also enhanced by breathiness, which presumably softened the aggressiveness associated with a large body size. These results, together with the additional finding that the same vocal dimensions also affect emotion judgment, indicate that humans still employ a vocal interaction strategy used in animal calls despite the development of complex language.

Computational Nuclear Quantum Many-Body Problem: The UNEDF Project

OpenAIRE

Bogner, Scott; Bulgac, Aurel; Carlson, Joseph A.; Engel, Jonathan; Fann, George; Furnstahl, Richard J.; Gandolfi, Stefano; Hagen, Gaute; Horoi, Mihai; Johnson, Calvin W.; Kortelainen, Markus; Lusk, Ewing; Maris, Pieter; Nam, Hai Ah; Navratil, Petr

2013-01-01

The UNEDF project was a large-scale collaborative effort that applied high-performance computing to the nuclear quantum many-body problem. UNEDF demonstrated that close associations among nuclear physicists, mathematicians, and computer scientists can lead to novel physics outcomes built on algorithmic innovations and computational developments. This review showcases a wide range of UNEDF science results to illustrate this interplay.

Orientation of axes in the elbow and forearm for biomechanical modelling

NARCIS (Netherlands)

Veeger, H. E J; Yu, B.

1996-01-01

To determine the three-dimensional positions and orientations of axes of rotation for elbow flexion and forearm prosupination, the flexion-extension and prosupination movements were measured for five arms. Four right and one arm were taken from four fresh cadavers. Movement was measured with a

Weight Care Project: Health professionals' attitudes and ability to assess body weight status - Study protocol

LENUS (Irish Health Repository)

Moorhead, Anne

2011-03-31

Abstract Background Health professionals working in primary care and public health have opportunities to address body weight status issues with their patients through face-to-face contact. The objectives of this all-Ireland project are: 1. to assess the attitudes, current practices\\/behaviours and knowledge of key health professional groups on body weight status; 2. to assess the health professional groups\\' ability to identify body weight status in both adults and children. The health professional groups are: (a) community related public health nurses; (b) school public health nurses; (c) GPs and practice nurses (primary care); and (d) occupational health nurses (workplace) from both Northern Ireland and the Republic of Ireland. Methods\\/Design This all-Ireland multi-disciplinary project follows a mixed methods approach using both quantitative and qualitative methodologies, and consists of four components: 1. Literature review - to explore the role of health professionals in managing obesity through spontaneous intervention in a variety of health promotion settings. 2. Telephone interviews and focus groups - to gain an in-depth insight into the views of health professionals in assessing body weight status. 3. Survey (primarily online but also paper-based) - to determine the attitudes, current practices\\/behaviours and knowledge of health professionals in assessing body weight status. 4. Online evaluation study - an online interactive programme will be developed to assess health professionals\\' ability to identify the body weight status of adults and children. Discussion This project will assess and report the attitudes, current practices\\/behaviours and knowledge of key health professional groups within Northern Ireland and the Republic of Ireland on body weight status, and their ability to identify body weight status in both adults and children. The results of this project will generate recommendations for clinical practice in managing obesity, which may

Weight Care Project: Health professionals' attitudes and ability to assess body weight status - Study protocol

Directory of Open Access Journals (Sweden)

Murphy Kathy

2011-03-01

Full Text Available Abstract Background Health professionals working in primary care and public health have opportunities to address body weight status issues with their patients through face-to-face contact. The objectives of this all-Ireland project are: 1. to assess the attitudes, current practices/behaviours and knowledge of key health professional groups on body weight status; 2. to assess the health professional groups' ability to identify body weight status in both adults and children. The health professional groups are: (a community related public health nurses; (b school public health nurses; (c GPs and practice nurses (primary care; and (d occupational health nurses (workplace from both Northern Ireland and the Republic of Ireland. Methods/Design This all-Ireland multi-disciplinary project follows a mixed methods approach using both quantitative and qualitative methodologies, and consists of four components: 1. Literature review - to explore the role of health professionals in managing obesity through spontaneous intervention in a variety of health promotion settings. 2. Telephone interviews and focus groups - to gain an in-depth insight into the views of health professionals in assessing body weight status. 3. Survey (primarily online but also paper-based - to determine the attitudes, current practices/behaviours and knowledge of health professionals in assessing body weight status. 4. Online evaluation study - an online interactive programme will be developed to assess health professionals' ability to identify the body weight status of adults and children. Discussion This project will assess and report the attitudes, current practices/behaviours and knowledge of key health professional groups within Northern Ireland and the Republic of Ireland on body weight status, and their ability to identify body weight status in both adults and children. The results of this project will generate recommendations for clinical practice in managing obesity, which may

optimization of protocol for m apical meristem of embryonic axes

African Journals Online (AJOL)

userpc

The hypocotyl segments, prima were removed and embryonic axes were placed in culture bott nd Skoog basal + B5 vitamins (MSB5) fortified with 22.2µM, 26.6µM opurine (BAP) to induce multiple shoots. Elongated shoots we tion media consisting of MSB5 supplemented with low concentrati one free media promoted direct ...

Stripa Project - Summary of defined programs

International Nuclear Information System (INIS)

Carlsson, L.; Olsson, T.; Pusch, R.

1980-11-01

An international cooperation project, the Stripa Project, in the field of nuclear waste management has been established as an autonomous OECH/NEA project. The management of the project has been entrusted to the Divsion Nuclear Fuel Safety (KBS) of the Swedish Nuclear Fuel Supply Company (SKBF). Technical input and contribution of funds are given by the following countries: Canada, Finland, Japan, Sweden, Switzerland and the United States. The report summarizes the programs for investigations funded at this stage. A number of investigations of a geophysical, geochemical and hydraulic nature will be carried out in the boreholes and the drill cores will be mapped and analysed. Another experiment is with various tracers which represent all important types of radionuclides and will be introduced in the naturally flowing water in a single fissure in granite. The experiment will show how well sorption data from the laboratory can be used to predict radionuclide migration in the field with real surfaces and waters. The third project aims at the verification of the suitability of the buffer materials at real conditions on site. Highly compacted bentonite and mixtures of bentonite and quartz sand are proposed as buffer materials in final repositories for high-level radioactive wastes. (GB)

Helical axes of skeletal knee joint motion during running.

Science.gov (United States)

van den Bogert, A J; Reinschmidt, C; Lundberg, A

2008-01-01

The purpose of this study was to determine the changes in the axis of rotation of the knee that occur during the stance phase of running. Using intracortical pins, the three-dimensional skeletal kinematics of three subjects were measured during the stance phase of five running trials. The stance phase was divided into equal motion increments for which the position and orientation of the finite helical axes (FHA) were calculated relative to a tibial reference frame. Results were consistent within and between subjects. At the beginning of stance, the FHA was located at the midepicondylar point and during the flexion phase moved 20mm posteriorly and 10mm distally. At the time of peak flexion, the FHA shifted rapidly by about 10-20mm in proximal and posterior direction. The angle between the FHA and the tibial transverse plane increased gradually during flexion, to about 15 degrees of medial inclination, and then returned to zero at the start of the extension phase. These changes in position and orientation of FHA in the knee should be considered in analyses of muscle function during human movement, which require moment arms to be defined relative to a functional rotation axis. The finding that substantial changes in axis of rotation occurred independent of flexion angle suggests that musculoskeletal models must have more than one kinematic degree-of-freedom at the knee. The same applies to the design of knee prostheses, if the goal is to restore normal muscle function.

Optimal broadband Mueller matrix ellipsometer using multi-waveplates with flexibly oriented axes

International Nuclear Information System (INIS)

Gu, Honggang; Chen, Xiuguo; Jiang, Hao; Zhang, Chuanwei; Liu, Shiyuan

2016-01-01

Accurate measurement of the Mueller matrix over a broad band is highly desirable for the characterization of nanostructures and nanomaterials. In this paper, we propose a general composite waveplate (GCW) that consists of multiple waveplates with flexibly oriented axes as a polarization modulating component in the Mueller matrix ellipsometer (MME). Although it is a common practice to make achromatic retarders by combining multiple waveplates, the novelty of the GCW is that both the retardances and azimuths of fast axes of the single-waveplates in the GCW are flexible parameters to be optimized, which is different from the conventional design where single-waveplates are usually arranged in symmetrical layout or with their fast axes parallel or perpendicular to each other. Consequently, the GCW can provide many more flexibilities to adapt to the optimization of the MME over a broad band. A quartz triplate, as a concrete example of the GCW, is designed and used in a house-made MME. The experimental results on the air demonstrate that the house-made MME using the optimally designed quartz triplates has an accuracy better than 0.2% and a precision better than 0.1% in the Mueller matrix measurement over a broad spectral range of 200∼1000 nm. The house-made MME exhibits high measurement repeatability better than 0.004 nm in testing a series of standard SiO 2 /Si samples with nominal oxide layer thicknesses ranging from 2 nm to 1000 nm. (paper)

Parametric Method to Define Area of Allowable Configurations while Changing Position of Restricted Zones

Science.gov (United States)

Pritykin, F. N.; Nefedov, D. I.; Rogoza, Yu A.; Zinchenko, Yu V.

2018-03-01

The article presents the findings related to the development of the module for automatic collision detection of the manipulator with restricted zones for virtual motion modeling. It proposes the parametric method for specifying the area of allowable joint configurations. The authors study the cases when restricted zones are specified using the horizontal plane or front-projection planes. The joint coordinate space is specified by rectangular axes in the direction of which the angles defining the displacements in turning pairs are laid off. The authors present the results of modeling which enabled to develop a parametric method for specifying a set of cross-sections defining the shape and position of allowable configurations in different positions of a restricted zone. All joint points that define allowable configurations refer to the indicated sections. The area of allowable configurations is specified analytically by using several kinematic surfaces that limit it. A geometric analysis is developed based on the use of the area of allowable configurations characterizing the position of the manipulator and reported restricted zones. The paper presents numerical calculations related to virtual simulation of the manipulator path performed by the mobile robot Varan when using the developed algorithm and restricted zones. The obtained analytical dependencies allow us to define the area of allowable configurations, which is a knowledge pool to ensure the intelligent control of the manipulator path in a predefined environment. The use of the obtained region to synthesize a joint trajectory makes it possible to correct the manipulator path to foresee and eliminate deadlocks when synthesizing motions along the velocity vector.

Improved dq-axes Model of PMSM Considering Airgap Flux Harmonics and Saturation

DEFF Research Database (Denmark)

Fasil, Muhammed; Antaloae, Ciprian; Mijatovic, Nenad

-saturation on constant torque curves of PMSM. Two interior permanent magnet motor with two different rotor topologies and different specifications are designed to evaluate the effect of saturation on synchronous and harmonic inductances, and operating points of the machines.......The classical dq-axes model of permanent magnet synchronous machines (PMSM) uses linear approximation. This was not an issue in earlier versions of PMSM drives because they mostly used surface magnet motors. With the arrival of interior permanent magnet (IPM) machines, which use reluctance torque...... along with magnet torque, the accuracy of linear models are found to be insufficient. In this work, the effect of air gap flux harmonics is included in the classical model of PMSM using d and q-axes harmonic inductances. Further, a method has been presented to assess the effect of saturation and cross...

Eixos mobilizadores em química Mobilizing axes in chemistry

Directory of Open Access Journals (Sweden)

Jailson B. de Andrade

2003-05-01

Full Text Available Over the last five years there have been significant changes in higher education in Brazil as well as in research funding. As a contribution to the development of Science and Technology, and aiming to portray Chemistry today in Brazil, in the context of last year´s elections for President, State Governors, National Congress and Legislative Chamber, the Directors and Consulting Council of the Brazilian Chemical Society, SBQ, initiated in 2002 a series of activities to produce a document entitled Mobilizing Axes in Chemistry. This discusses undergraduate and graduate teaching in Chemistry, a new model for research funding, and the overall state of the art, and future perspectives. Six mobilizing axes have been identified and discussed to date: 1. Training of highly qualified personnel; 2. Decentralization, and discouragement of institutional in-breeding; 3. Stimulation of entrepreneurship and interdisciplinarity; 4. A guaranteed budget for Science and Technology; 5. Proactive interaction of academics with economic activity; and 6. Removal of institutional bottle-necks of all sorts. The Brazilian Chemical Society hopes that the new administration will in the near future begin the task of improving the national education system and increase funding for Science and Technology.

[New theory of holistic integrative physiology and medicine. III: New insight of neurohumoral mechanism and pattern of control and regulation for core axe of respiration, circulation and metabolism].

Science.gov (United States)

Sun, Xing-guo

2015-07-01

Systemic mechanism of neurohumoral control and regulation for human is limited. We used the new theory of holistic integrative physiology and medicine to approach the mechanism and pattern of neurohumoral control and regulation for life. As the core of human life, there are two core axes of functions. The first one is the common goal of respiration and circulation to transport oxygen and carbon dioxide for cells, and the second one is the goal of gastrointestinal tract and circulation to transport energy material and metabolic product for cells. These two core axes maintain the metabolism. The neurohumoral regulation is holistically integrated and unified for all functions in human body. We simplified explain the mechanism of neurohumoral control and regulation life (respiration and circulation) as the example pattern of sound system. Based upon integrated regulation of life, we described the neurohumoral pattern to control respiration and circulation.

Self-Tracking: Reflections from the BodyTrack Project.

Science.gov (United States)

Wright, Anne

2016-07-06

Based on the author's experiences the practice of self-tracking can empower individuals to explore and address issues in their lives. This work is inspired by examples of people who have reclaimed their wellness through an iterative process of noticing patterns of ups and downs, trying out new ideas and strategies, and observing the results. In some cases, individuals have realized that certain foods, environmental exposures, or practices have unexpected effects for them, and that adopting custom strategies can greatly improve quality of life, overcoming chronic problems. Importantly, adopting the role of investigator of their own situation appears to be transformative: people who embarked on this path changed their relationship to their health situation even before making discoveries that helped lead to symptom improvement. The author co-founded the BodyTrack project in 2010 with the goal of empowering a broader set of people to embrace this investigator role in their own lives and better address their health and wellness concerns, particularly those with complex environmental or behavioral components. The core of the BodyTrack system is an open source web service called Fluxtream ( https://fluxtream.org ) that allows users to aggregate, visualize, and reflect on data from myriad sources on a common timeline. The project is also working to develop and spread peer coaching practices to help transfer the culture and skills of self-tracking while mentoring individuals in how to self-assess their own situation and guide the process for themselves.

Defining body deception and its role in peer based social comparison theories of body dissatisfaction.

Science.gov (United States)

Hildebrandt, Tom; Shiovitz, Rachel; Alfano, Lauren; Greif, Rebecca

2008-09-01

The purpose of the current study was to operationalize the phenomenon of body deception, describe its theoretical importance, and validate its existence in an experimental paradigm. The definition of body deception includes the intentional misrepresentation of information about appearance to others. The present study examined body deception in a controlled experimental study of male and female same-sex peer groups using a series of hierarchical linear models. Ninety male and 90 female undergraduates were randomized to an experimental same-sex peer group or individual control condition. The results suggested that both men and women used body deception among peers, but men's body deception was muscularity driven whereas women's was thinness driven. Body dissatisfaction was significantly predictive of the degree of body deception used by both genders and it was significantly related to peer group membership. An integrated model for the role of body deception in body image disturbance is proposed.

Three-point method for measuring the geometric error components of linear and rotary axes based on sequential multilateration

International Nuclear Information System (INIS)

Zhang, Zhenjiu; Hu, Hong

2013-01-01

The linear and rotary axes are fundamental parts of multi-axis machine tools. The geometric error components of the axes must be measured for motion error compensation to improve the accuracy of the machine tools. In this paper, a simple method named the three point method is proposed to measure the geometric error of the linear and rotary axes of the machine tools using a laser tracker. A sequential multilateration method, where uncertainty is verified through simulation, is applied to measure the 3D coordinates. Three noncollinear points fixed on the stage of each axis are selected. The coordinates of these points are simultaneously measured using a laser tracker to obtain their volumetric errors by comparing these coordinates with ideal values. Numerous equations can be established using the geometric error models of each axis. The geometric error components can be obtained by solving these equations. The validity of the proposed method is verified through a series of experiments. The results indicate that the proposed method can measure the geometric error of the axes to compensate for the errors in multi-axis machine tools.

Misalignment of outflow axes in the proto-multiple systems in Perseus

DEFF Research Database (Denmark)

Lee, Katherine I.; Dunham, Michael M.; Myers, Philip C.

2016-01-01

We investigate the alignment between outflow axes in nine of the youngest binary/multiple systems in the Perseus Molecular Cloud. These systems have typical member spacing larger than 1000 au. For outflow identification, we use 12CO(2-1) and 12CO(3-2) data from a large survey with the Submillimet...

Defining collaborative elements in an effective and efficient collaboration in a construction project

DEFF Research Database (Denmark)

Bohnstedt, Kristian Ditlev; Wandahl, Søren

2018-01-01

Professional organizations, companies, educational and research institutions of the construction industry and the government have been driving initiatives and participated in the debate on the future of the construction industry. The state has participated in the construction industry development...... through experimental construction projects and debates and, on this basis, demanded and released guidelines for public and publicly funded construction projects. In the quest of defining collaborative elements, previous efforts have been reviewed, thus, identifying most successful initiatives and the used...... collaborative elements. These elements will be included in a study where they will go through a verification process. The themes derived from a contraction of the identified aspects in collaboration through the past two decades in the Danish construction industry were examined to conclude on which of the themes...

The effect of aging on mitochondrial proteins in germinating soybean embryonic axes

International Nuclear Information System (INIS)

Furman, K.C.

1988-01-01

Aging-induced deterioration is a major problem associated with seed storage. Impairment of mitochondrial function is one of the first effects of aging. The composition and synthesis of nuclear and mito-coded mitochondrial proteins from soybean (Glycine max. L. Merr.) embryonic axes were studied to elucidate the cause of impaired respiratory development during germination of aged seeds. Axes excised from high vigor (HV) seeds and aged or low vigor (LV) seeds were protected from imbibition injury and germinated for various times, or excised from developing seeds, and then radiolabeled for one hour in [ 35 S]methionine. Mitochondria were then isolated and total mitochondrial protein was subjected to sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), followed by quantitative staining and fluorography of labeled polypeptides. Alternatively, an original two-dimensional native-to-denaturing gel electrophoretic technique was used to analyze native protein associations and to purify a 23 kD polypeptide

Running in ostriches (Struthio camelus): three-dimensional joint axes alignment and joint kinematics.

Science.gov (United States)

Rubenson, Jonas; Lloyd, David G; Besier, Thor F; Heliams, Denham B; Fournier, Paul A

2007-07-01

Although locomotor kinematics in walking and running birds have been examined in studies exploring many biological aspects of bipedalism, these studies have been largely limited to two-dimensional analyses. Incorporating a five-segment, 17 degree-of-freedom (d.f.) kinematic model of the ostrich hind limb developed from anatomical specimens, we quantified the three-dimensional (3-D) joint axis alignment and joint kinematics during running (at approximately 3.3 m s(-1)) in the largest avian biped, the ostrich. Our analysis revealed that the majority of the segment motion during running in the ostrich occurs in flexion/extension. Importantly, however, the alignment of the average flexion/extension helical axes of the knee and ankle are rotated externally to the direction of travel (37 degrees and 21 degrees , respectively) so that pure flexion and extension at the knee will act to adduct and adbuct the tibiotarsus relative to the plane of movement, and pure flexion and extension at the ankle will act to abduct and adduct the tarsometatarsus relative to the plane of movement. This feature of the limb anatomy appears to provide the major lateral (non-sagittal) displacement of the lower limb necessary for steering the swinging limb clear of the stance limb and replaces what would otherwise require greater adduction/abduction and/or internal/external rotation, allowing for less complex joints, musculoskeletal geometry and neuromuscular control. Significant rotation about the joints' non-flexion/extension axes nevertheless occurs over the running stride. In particular, hip abduction and knee internal/external and varus/valgus motion may further facilitate limb clearance during the swing phase, and substantial non-flexion/extension movement at the knee is also observed during stance. Measurement of 3-D segment and joint motion in birds will be aided by the use of functionally determined axes of rotation rather than assumed axes, proving important when interpreting the

The Lp Lp Lp-curvature images of convex bodies and Lp Lp Lp ...

Indian Academy of Sciences (India)

Associated with the -curvature image defined by Lutwak, some inequalities for extended mixed -affine surface areas of convex bodies and the support functions of -projection bodies are established. As a natural extension of a result due to Lutwak, an -type affine isoperimetric inequality, whose special cases are ...

Research on Measurement Accuracy of Laser Tracking System Based on Spherical Mirror with Rotation Errors of Gimbal Mount Axes

Science.gov (United States)

Shi, Zhaoyao; Song, Huixu; Chen, Hongfang; Sun, Yanqiang

2018-02-01

This paper presents a novel experimental approach for confirming that spherical mirror of a laser tracking system can reduce the influences of rotation errors of gimbal mount axes on the measurement accuracy. By simplifying the optical system model of laser tracking system based on spherical mirror, we can easily extract the laser ranging measurement error caused by rotation errors of gimbal mount axes with the positions of spherical mirror, biconvex lens, cat's eye reflector, and measuring beam. The motions of polarization beam splitter and biconvex lens along the optical axis and vertical direction of optical axis are driven by error motions of gimbal mount axes. In order to simplify the experimental process, the motion of biconvex lens is substituted by the motion of spherical mirror according to the principle of relative motion. The laser ranging measurement error caused by the rotation errors of gimbal mount axes could be recorded in the readings of laser interferometer. The experimental results showed that the laser ranging measurement error caused by rotation errors was less than 0.1 μm if radial error motion and axial error motion were within ±10 μm. The experimental method simplified the experimental procedure and the spherical mirror could reduce the influences of rotation errors of gimbal mount axes on the measurement accuracy of the laser tracking system.

Numerical evaluation of state boundary surface through rotation of principal stress axes in sand

International Nuclear Information System (INIS)

Sadrnejad, S. A.

2001-01-01

In applying shear stress to saturated soil with arbitrary stress paths, the prediction of the exact value of strains is difficult because of mainly its stress path dependent nature. Rotation of the principal stress axes during shearing of the soil is a feature of stress paths associated with many field loading situations. A proper understanding of the effects of principal stress rotation on soil behavior can be provided if the anisotropy existing prior to stress rotation and induced anisotropy due to plastic flow in soil are clearly understood and modeled. A multi laminate based model for soil is developed and used to compute and present the influence of rotation of principal stress axes on the plastic behavior of soil. This is fulfilled by distributing the effects of boundary condition changes into several predefined sampling orientations at one point and summing the micro-results up as the macro-result. The validity of the presented model examined by comparing numerical and test results showing the mentioned aspect. In this paper, the state boundary surface is numerically obtained by a multi laminate based model capable of predicting the behavior of sand under the influences of rotation of the direction of principal stress axes and induced anisotropy. the predicted numerical results are tally in agreement with experiments

Learning Axes and Bridging Tools in a Technology-Based Design for Statistics

Science.gov (United States)

Abrahamson, Dor; Wilensky, Uri

2007-01-01

We introduce a design-based research framework, "learning axes and bridging tools," and demonstrate its application in the preparation and study of an implementation of a middle-school experimental computer-based unit on probability and statistics, "ProbLab" (Probability Laboratory, Abrahamson and Wilensky 2002 [Abrahamson, D., & Wilensky, U.…

Project monitoring and evaluation: an enhancing method for health research system management.

Science.gov (United States)

Djalalinia, Shirin; Owlia, Parviz; Malekafzali, Hossein; Ghanei, Mostafa; Babamahmoodi, Abdolreza; Peykari, Niloofar

2014-04-01

Planning, organizing, staffing, leading and monitoring are the basic functional component of management. In present article, we aim to define the project monitoring and evaluation in health research system (HRS) considering its success and challenges based on our national experience. IN THIS STUDY BASED ON THE INFORMATION OF ANNUAL MEDICAL SCIENCE UNIVERSITIES EVALUATION DURING THE LAST DECADE THE HRS INDICATORS HAVE BEEN SCORED IN THREE AXES BASED ON HRS FUNCTIONS: Stewardship, capacity building and knowledge production. In this article, we will focus on the results of HRS evaluation from 2002 to 2010, also on its success and challenges. In an overall view, the main results are the experiences of the designing and implantation of such process after pre-project preparation, all parts followed under the whole supervision of the aims of the HRS evaluation. Project management light the way of practical application of knowledge, skills, tools and techniques for better HRS evaluation and management. We concluded that; although monitoring and evaluation as an essential part of HRS Management light the improvement ahead way but we still need to advantage of the new project management advances.

Project DEGRUPE: Goals and Historiographical Contextualization

Directory of Open Access Journals (Sweden)

COELHO, Maria Helena da Cruz

2015-07-01

Full Text Available This paper aims to present the main axes of the project DEGRUPE whose principal objective is to study the role of the clergy in the construction of the Iberian monarchies and mobility circuits designed by these protagonists. To fulfill this objective, the interuniversity project team of DEGRUPE opted for a comparative perspective between different kingdoms of the Iberian Peninsula. The second part of this paper consists of a brief analysis of the underlying historiographical framework of the project including mainly research on relationship between clergy and royalty in the middle ages.

AxeCorp's "Team Challenge": Teaching Teamwork via 3D Social Networking Platforms

Science.gov (United States)

Carmichael, Kendra

2011-01-01

To prepare business communication undergraduates for a changing work world and to engage today's tech-savvy students, many instructors have embraced social media by incorporating its use in the classroom. This article describes AxeCorp, a fictional company headquartered on the immersive social networking platform, Second Life, and one particular…

Automatic teeth axes calculation for well-aligned teeth using cost profile analysis along teeth center arch.

Science.gov (United States)

Kim, Gyehyun; Lee, Jeongjin; Seo, Jinwook; Lee, Wooshik; Shin, Yeong-Gil; Kim, Bohyoung

2012-04-01

In dental implantology and virtual dental surgery planning using computed tomography (CT) images, the examination of the axes of neighboring and/or biting teeth is important to improve the performance of the masticatory system as well as the aesthetic beauty. However, due to its high connectivity to neighboring teeth and jawbones, a tooth and/or its axis is very elusive to automatically identify in dental CT images. This paper presents a novel method of automatically calculating individual teeth axes. The planes separating the individual teeth are automatically calculated using cost profile analysis along the teeth center arch. In this calculation, a novel plane cost function, which considers the intensity and the gradient, is proposed to favor the teeth separation planes crossing the teeth interstice and suppress the possible inappropriately detected separation planes crossing the soft pulp. The soft pulp and dentine of each individually separated tooth are then segmented by a fast marching method with two newly proposed speed functions considering their own specific anatomical characteristics. The axis of each tooth is finally calculated using principal component analysis on the segmented soft pulp and dentine. In experimental results using 20 clinical datasets, the average angle and minimum distance differences between the teeth axes manually specified by two dentists and automatically calculated by the proposed method were 1.94° ± 0.61° and 1.13 ± 0.56 mm, respectively. The proposed method identified the individual teeth axes accurately, demonstrating that it can give dentists substantial assistance during dental surgery such as dental implant placement and orthognathic surgery.

FRAMES User Defined Body Burden Concentration File Module Documentation

International Nuclear Information System (INIS)

Pelton, Mitchell A.; Rutz, Frederick C.; Eslinger, Melany A.; Gelston, Gariann M.

2001-01-01

The Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES) Body Burden Concentration File (BBF) contains time-varying, instantaneous, constituent concentrations for body burden by contaminant. This report contains the requirements for this file and will be used by software engineers and testers to ensure that the file inputs properly.

An Asymmetrical Trade: Trade in the Exotic and Our Understanding of Axes and Early Neolithic Exchange

Directory of Open Access Journals (Sweden)

Tom Clare

2009-09-01

Full Text Available This article explores the idea that the movement of axes away from their source of procurement, such as those of Group VI, reflects in part an invisible trade in perishable goods. In particular, it hypothesises that the pattern of movement was stimulated in the early Neolithic by the dispersal of those exotic goods required to establish farming. The evidence for and the implications of this are explored, and it is suggested that in order to facilitate understanding of both the 'trade' in stone axes and the Neolithic in general, what is needed is a systematic programme of petrological sourcing of pottery and other artefacts.

Two Axes Sun Tracking System for Heliostat: Case Study in Algeria

Directory of Open Access Journals (Sweden)

Mihoub Sofiane

2016-03-01

Full Text Available In this paper, using Proteus software, sun tracking system with 2 axes has developped to site of GHARDAIA, in the south of ALGERIA.O2 DC motors have used to move heliostat in N–S and E–W axis polar, in order to tracking the sun path.the distinction between day and night has provided by light dependent resistor (LDR.An algorithm of two axes sun tracking system hab developed and simulated under Proteus software, after DC motor’s parameters have verified and simulated under MATLAB software. The results show that: in the first, the development of the heliostat control requires the knowledge of the position of each heliostat relative to the tower to ensure the proper operation of the motors, and the uniformity of the reflected beam to the target.Then the choice of the drive motors is based on the useful power, including the weight of the heliostat, and all efforts affects on operation of motors in different seasons of the year, like the wind.And The position of the heliostat depends of chopper duty cycle.Finally,Conducting a power tower with mobile heliostats requires a techno-economic study on all components (heliostats, tower... of the plant, for example weather two motors for each heliostat field.

Sox21 deletion in mice causes postnatal growth deficiency without physiological disruption of hypothalamic-pituitary endocrine axes.

Science.gov (United States)

Cheung, Leonard Y M; Okano, Hideyuki; Camper, Sally A

2017-01-05

The hypothalamic-pituitary axes are the coordinating centers for multiple endocrine gland functions and physiological processes. Defects in the hypothalamus or pituitary gland can cause reduced growth and severe short stature, affecting approximately 1 in 4000 children, and a large percentage of cases of pituitary hormone deficiencies do not have an identified genetic cause. SOX21 is a protein that regulates hair, neural, and trophoblast stem cell differentiation. Mice lacking Sox21 have reduced growth, but the etiology of this growth defect has not been described. We studied the expression of Sox21 in hypothalamic-pituitary development and examined multiple endocrine axes in these mice. We find no evidence of reduced intrauterine growth, food intake, or physical activity, but there is evidence for increased energy expenditure in mutants. In addition, despite changes in pituitary hormone expression, hypothalamic-pituitary axes appear to be functional. Therefore, SOX21 variants may be a cause of non-endocrine short stature in humans. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Project, Aerodynamic, Thermal and Ballistic Analysis of a Lifting-Body Reentry Vehicle

Directory of Open Access Journals (Sweden)

A. N. Eliseev

2015-01-01

Full Text Available The objective of this article is to assess the prospects for an increasingly maneuverable reentry vehicle (RV of class "lifting body". In this regard, a project aerodynamic thermal and ballistic analysis has been conducted and the results have been compared with some well-known projects of the RV of the same class, made both in our country and abroad.The project analysis begins with finding a position of the "lifting body" vehicle in the classification system. Said classification distribution allows correct formulation of requirements for the conceptual structure of an aerospace vehicle at the initial stage of design in terms of system positions, since just the initial phase of the design often determines the success of the whole program.Then the paper compares design characteristics of the RV of class "lifting body" with vehicles such as X-15 rocket plane, the orbiter "Space Shuttle», M2-F2, HL-10, SV-5, and NASP "Hermes". It also gives a comparative estimate of the "lifting body" RV mass in a wide range of dimensions. The paper shows the sustainability of various landing complexes with reference to the Russian experience in developing the RV " Soyuz", and the conditions for using the vehicles of class "lifting body" in space programs.The aerodynamic analysis uses method for the approximate Newtonian theory to calculate aerodynamic characteristics of the perspective RV of class "lifting body" in the hypersonic descent phase. To obtain the desired aerodynamic performance and reduce balancing weight is contemplated a possibility to provide balance by introducing additional boards. The ballistic analysis considers four modes of descent:1. zero roll descent;2. maximum cross-range descent without restriction;3. maximum cross-range descent with restriction of maximum overload and maximum temperature;4. ballistic descent.To calculate the RV ballistic characteristics a system of equations of the vehicle motion in the atmosphere is used. The vehicle

Drinking Levels Defined

Science.gov (United States)

... of Alcohol Consumption Alcohol's Effects on the Body Alcohol Use Disorder Fetal Alcohol Exposure Support & Treatment Alcohol Policy Special ... Definition of Drinking at Low Risk for Developing Alcohol Use Disorder (AUD): For women, low-risk drinking is defined ...

Multi-view collimators for scintillation cameras

International Nuclear Information System (INIS)

Hatton, J.; Grenier, R.P.

1982-01-01

This patent specification describes a collimator for obtaining multiple images of a portion of a body with a scintillation camera comprises a body of radiation-impervious material defining two or more groups of channels each group comprising a plurality of parallel channels having axes intersecting the portion of the body being viewed on one side of the collimator and intersecting the input surface of the camera on the other side of the collimator to produce a single view of said body, a number of different such views of said body being provided by each of said groups of channels, each axis of each channel lying in a plane approximately perpendicular to the plane of the input surface of the camera and all of such planes containing said axes being approximately parallel to each other. (author)

Body weight as a predictor of antidepressant efficacy in the GENDEP project

DEFF Research Database (Denmark)

Uher, Rudolf; Mors, Ole; Hauser, Joanna

2009-01-01

Background: Being overweight or obese may be associated with poor response to antidepressants. The present report explores the moderation of antidepressant response by body weight to establish the specificity to antidepressant mode of action, type of depressive symptoms and gender. Methods: Height....... The relationship between body weight and change in neurovegetative symptoms was moderated by gender with obese men responding less to nortriptyline and obese women having poorer response to both antidepressants. Limitations: As no placebo arm was included, the specificity of findings to antidepressants is relative...... and weight were measured in 797 men and women with major depression treated with escitalopram or nortriptyline for twelve weeks as part of the Genome Based Therapeutic Drugs for Depression (GENDEP) project. Body mass index (BMI) and obesity (BMI > 30) were tested as predictors of change in depressive...

project SENSE : multimodal simulation with full-body real-time verbal and nonverbal interactions

NARCIS (Netherlands)

Miri, Hossein; Kolkmeier, Jan; Taylor, Paul Jonathon; Poppe, Ronald; Heylen, Dirk; Poppe, Ronald; Meyer, John-Jules; Veltkamp, Remco; Dastani, Mehdi

2016-01-01

This paper presents a multimodal simulation system, project-SENSE, that combines virtual reality and full-body motion capture technologies with real-time verbal and nonverbal communication. We introduce the technical setup and employed hardware and software of a first prototype. We discuss the

Mask-based dual-axes tomoholography using soft x-rays

International Nuclear Information System (INIS)

Guehrs, Erik; Frömmel, Stefanie; Günther, Christian M; Hessing, Piet; Schneider, Michael; Shemilt, Laura; Eisebitt, Stefan; Fohler, Manuel

2015-01-01

We explore tomographic mask-based Fourier transform x-ray holography with respect to the use of a thin slit as a reference wave source. This imaging technique exclusively uses the interference between the waves scattered by the object and the slit simplifying the experimental realization and ensuring high data quality. Furthermore, we introduce a second reference slit to rotate the sample around a second axis and to record a dual-axes tomogram. Compared to a single-axis tomogram, the reconstruction artifacts are decreased in accordance with the reduced missing data wedge. Two demonstration experiments are performed where test structures are imaged with a lateral resolution below 100 nm. (paper)

Axes, planes and tubes, or the geometry of embryogenesis.

Science.gov (United States)

Brauckmann, Sabine

2011-12-01

The paper presents selected figures of chick embryogenesis as depicted in the classic studies of Caspar Friedrich Wolff (1734-1794), Christian Heinrich Pander (1794-1865) and Karl Ernst von Baer (1792-1786). My main objective here is (1) to demonstrate how the imagery of Wolff, Pander and Baer attempted to project an image of a 3-dimensional rotating body into static figures on paper by means of linear contours, and (2) to ponder on the efficacy and pervasiveness of dots, lines and arrows for depicting embryogenesis. Copyright © 2011 Elsevier Ltd. All rights reserved.

Real-space observation of a right-rotating inhomogeneous cycloidal spin spiral by spin-polarized scanning tunneling microscopy in a triple axes vector magnet.

Science.gov (United States)

Meckler, S; Mikuszeit, N; Pressler, A; Vedmedenko, E Y; Pietzsch, O; Wiesendanger, R

2009-10-09

Using spin-polarized scanning tunneling microscopy performed in a triple axes vector magnet, we show that the magnetic structure of the Fe double layer on W(110) is an inhomogeneous right-rotating cycloidal spin spiral. The magnitude of the Dzyaloshinskii-Moriya vector is extracted from the experimental data using micromagnetic calculations. The result is confirmed by comparison of the measured saturation field along the easy axis to the respective value as obtained from Monte Carlo simulations. We find that the Dzyaloshinskii-Moriya interaction is too weak to destabilize the single domain state. However, it can define the sense of rotation and the cycloidal spiral type once the single domain state is destabilized by dipolar interaction.

Framework to Define Structure and Boundaries of Complex Health Intervention Systems: The ALERT Project

Directory of Open Access Journals (Sweden)

Elena Boriani

2017-07-01

Full Text Available Health intervention systems are complex and subject to multiple variables in different phases of implementation. This constitutes a concrete challenge for the application of translational science in real life. Complex systems as health-oriented interventions call for interdisciplinary approaches with carefully defined system boundaries. Exploring individual components of such systems from different viewpoints gives a wide overview and helps to understand the elements and the relationships that drive actions and consequences within the system. In this study, we present an application and assessment of a framework with focus on systems and system boundaries of interdisciplinary projects. As an example on how to apply our framework, we analyzed ALERT [an integrated sensors and biosensors’ system (BEST aimed at monitoring the quality, health, and traceability of the chain of the bovine milk], a multidisciplinary and interdisciplinary project based on the application of measurable biomarkers at strategic points of the milk chain for improved food security (including safety, human, and ecosystem health (1. In fact, the European food safety framework calls for science-based support to the primary producers’ mandate for legal, scientific, and ethical responsibility in food supply. Because of its multidisciplinary and interdisciplinary approach involving human, animal, and ecosystem health, ALERT can be considered as a One Health project. Within the ALERT context, we identified the need to take into account the main actors, interactions, and relationships of stakeholders to depict a simplified skeleton of the system. The framework can provide elements to highlight how and where to improve the project development when project evaluations are required.

The relation of body mass index and abdominal adiposity with dyslipidemia in 27 general populations of the WHO MONICA Project

DEFF Research Database (Denmark)

Wietlisbach, V; Marques-Vidal, P; Kuulasmaa, K

2013-01-01

BACKGROUND AND AIMS: The association between adiposity measures and dyslipidemia has seldom been assessed in a multipopulational setting. METHODS AND RESULTS: 27 populations from Europe, Australia, New Zealand and Canada (WHO MONICA project) using health surveys conducted between 1990 and 1997...... in adults aged 35-64 years (n = 40,480). Dyslipidemia was defined as the total/HDL cholesterol ratio >6 (men) and >5 (women). Overall prevalence of dyslipidemia was 25% in men and 23% in women. Logistic regression showed that dyslipidemia was strongly associated with body mass index (BMI) in men......, do not lead to optimal risk stratification for dyslipidemia in middle-age adults. Sex-specific adaptations are necessary, in particular by taking into account abdominal obesity in normal-weight men, post-menopausal age in women and regular smoking in both sexes....

Body contact and body language

DEFF Research Database (Denmark)

Winther, Helle

2008-01-01

and the boundaries between self and world. In western societies, the modern premises for contact are in some ways developing from close contact to virtual communication. With this breadth of perspective in mind, the ques­tion is whether conscious and experimental work with body contact and body language in move......­ment psychology and education provide potential for intense personal develop­ment as well as for social and cultural learning processes. This performative research project originates from the research project entitled, Movement Psy­chol­ogy: The Language of the Body and the Psy­chol­ogy of Movement based......Body contact and body language are unique and existential and, although culturally dependent and socially embodied, they are also universal communication forms. For small children all over the world, warm, close and nourishing body contact is fundamental to their embodied experi­ence of themselves...

Leonhard Euler and the mechanics of rigid bodies

Science.gov (United States)

Marquina, J. E.; Marquina, M. L.; Marquina, V.; Hernández-Gómez, J. J.

2017-01-01

In this work we present the original ideas and the construction of the rigid bodies theory realised by Leonhard Euler between 1738 and 1775. The number of treatises written by Euler on this subject is enormous, including the most notorious Scientia Navalis (1749), Decouverte d’un noveau principe de mecanique (1752), Du mouvement de rotation des corps solides autour d’un axe variable (1765), Theoria motus corporum solidorum seu rigidorum (1765) and Nova methodus motu corporum rigidorum determinandi (1776), in which he developed the ideas of the instantaneous rotation axis, the so-called Euler equations and angles, the components of what is now known as the inertia tensor, the principal axes of inertia, and, finally, the generalisation of the translation and rotation movement equations for any system. Euler, the man who ‘put most of mechanics into its modern form’ (Truesdell 1968 Essays in the History of Mechanics (Berlin: Springer) p 106).

On load paths and load bearing topology from finite element analysis

International Nuclear Information System (INIS)

Kelly, D; Reidsema, C; Lee, M

2010-01-01

Load paths can be mapped from vector plots of 'pointing stress vectors'. They define a path along which a component of load remains constant as it traverses the solution domain. In this paper the theory for the paths is first defined. Properties of the plots that enable a designer to interpret the structural behavior from the contours are then identified. Because stress is a second order tensor defined on an orthogonal set of axes, the vector plots define separate paths for load transfer in each direction of the set of axes. An algorithm is therefore presented that combines the vectors to define a topology to carry the loads. The algorithm is shown to straighten the paths reducing bending moments and removing stress concentration. Application to a bolted joint, a racing car body and a yacht hull demonstrate the usefulness of the plots.

Defining Overweight and Obesity

Science.gov (United States)

... Micronutrient Malnutrition State and Local Programs Defining Adult Overweight and Obesity Recommend on Facebook Tweet Share Compartir ... weight for a given height is described as overweight or obese. Body Mass Index, or BMI, is ...

From whole-body counting to imaging: The computer aided collimation gamma camera project (CACAO)

Energy Technology Data Exchange (ETDEWEB)

Jeanguillaume, C.; Begot, S.; Quartuccio, M.; Douiri, A.; Ballongue, P

2000-07-01

Whole-body counting is the method of choice for in vivo detection of contamination. To extend this well established method, the possible advantages of imaging radiocontaminants are examined. The use of the CACAO project is then studied. A comparison of simulated reconstructed images obtained by the CACAO project and by a conventional gamma camera used in nuclear medicine follows. Imaging a radionuclide contaminant with a geometrical sensitivity of 10{sup -2} seems possible in the near future. (author)

From whole-body counting to imaging: The computer aided collimation gamma camera project (CACAO)

International Nuclear Information System (INIS)

Jeanguillaume, C.; Begot, S.; Quartuccio, M.; Douiri, A.; Ballongue, P.

2000-01-01

Whole-body counting is the method of choice for in vivo detection of contamination. To extend this well established method, the possible advantages of imaging radiocontaminants are examined. The use of the CACAO project is then studied. A comparison of simulated reconstructed images obtained by the CACAO project and by a conventional gamma camera used in nuclear medicine follows. Imaging a radionuclide contaminant with a geometrical sensitivity of 10 -2 seems possible in the near future. (author)

Viewing pain and happy faces elicited similar changes in postural body sway.

Directory of Open Access Journals (Sweden)

Juan Gea

Full Text Available Affective facial expressions are potent social cues that can induce relevant physiological changes, as well as behavioral dispositions in the observer. Previous studies have revealed that angry faces induced significant reductions in body sway as compared with neutral and happy faces, reflecting an avoidance behavioral tendency as freezing. The expression of pain is usually considered an unpleasant stimulus, but also a relevant cue for delivering effective care and social support. Nevertheless, there are few data about behavioral dispositions elicited by the observation of pain expressions in others. The aim of the present research was to evaluate approach-avoidance tendencies by using video recordings of postural body sway when participants were standing and observing facial expressions of pain, happy and neutral. We hypothesized that although pain faces would be rated as more unpleasant than the other faces, they would provoke significant changes in postural body sway as compared to neutral facial expressions. Forty healthy female volunteers (mean age 25 participated in the study. Amplitude of forward movements and backward movements in the anterior-posterior and medial-lateral axes were obtained. Statistical analyses revealed that pain faces were the most unpleasant stimuli, and that both happy and pain faces were more arousing than neutral ones. Happy and pain faces also elicited greater amplitude of body sway in the anterior-posterior axes as compared with neutral faces. In addition, significant positive correlations were found between body sway elicited by pain faces and pleasantness and empathic ratings, suggesting that changes in postural body sway elicited by pain faces might be associated with approach and cooperative behavioral responses.

Body weight and incidence of breast cancer defined by estrogen and progesterone receptor status--a meta-analysis.

Science.gov (United States)

Suzuki, Reiko; Orsini, Nicola; Saji, Shigehira; Key, Timothy J; Wolk, Alicja

2009-02-01

Epidemiological evidence indicates that the association between body weight and breast cancer risk may differ across menopausal status as well as the estrogen receptor (ER) and progesterone receptor (PR) tumor status. To date, no meta-analysis has been conducted to assess the association between body weight and ER/PR defined breast cancer risk, taking into account menopausal status and study design. We searched MEDLINE for relevant studies published from January 1, 1970 through December 31, 2007. Summarized risk estimates with 95% confidence intervals (CIs) were calculated using a random-effects model. The summarized results of 9 cohorts and 22 case-control studies comparing the highest versus the reference categories of relative body weight showed that the risk for ER+PR+ tumors was 20% lower (95% CI=-30% to -8%) among premenopausal (2,643 cases) and 82% higher (95% CI=55-114%) among postmenopausal (5,469 cases) women. The dose-response meta-analysis of ER+PR+ tumors showed that each 5-unit increase in body mass index (BMI, kg/m2) was associated with a 33% increased risk among postmenopausal women (95% CI=20-48%) and 10% decreased risk among premenopausal women (95% CI=-18% to -1%). No associations were observed for ER-PR- or ER+PR- tumors. For discordant tumors ER+PR- (pre) and ER-PR+ (pre/post) the number of cases were too small (weight and breast cancer risk is critically dependent on the tumor's ER/PR status and the woman's menopausal status. Body weight control is the effective strategy for preventing ER+PR+ tumors after menopause. Copyright (c) 2008 Wiley-Liss, Inc.

Swimming training repercussion on metabolic and structural bone development; benefits of the incorporation of whole body vibration or pilometric training; the RENACIMIENTO project.

Science.gov (United States)

Gómez-Bruton, A; Gonzalez-Agüero, A; Casajus, J A; Vicente-Rodriguez, German

2014-08-01

Enviromental factors such as exercise participation and nutrition have often been linked to bone improvements. However, not all sports have the same effects, being non-osteogenic sports such as swimming defined as negative or neutral sports to practice regarding bone mass by some authors, similarly exercise-diet interaction in especific groups is still not clear. To present the methodology of the RENACIMENTO project that aims to evaluate body composition and more specifically bone mass by several techniques in adolescent swimmers and to observe the effects and perdurability of whole body vibration (WBV) and jumping intervention (JIN) on body composition and fitness on this population and explore posible diet interactions. Randomized controlled trial. 78 swimmers (12-17 y) and 26 sex- and age-matched controls will participate in this study. Dual energy X-ray, peripheral Quantitative Computed Tomography, Quantitative Ultrasound, Bioelectrical Impedance Analysis, and anthropometry measurements will be performed in order to evaluate body composition. Physical activity, nutrition, pubertal development and socio-economical status may act as confounders of body composition and therefore will also be registered. Several fitness factors regarding strength, endurance, performance and others will also be registered to evaluate differences with controls and act as confounders. A 7-month WBV therapy will be performed by 26 swimmers consisting of a training of 15 minutes 3 times per week. An 8 month JIM will also be performed by 26 swimmers 3 times per week. The remaining 26 swimmers will continue their normal swimming training. Four evaluations will be performed, the first one in order to describe differences between swimmers and controls. The second one to describe the effects of the interventions and the third and fourth evaluations to describe the perdurability of the effects of the WBV and JIN. The RENACIMIENTO project will allow to answer several questions regarding body

Characteristics of manipulator for industrial robot with three rotational pairs having parallel axes

Science.gov (United States)

Poteyev, M. I.

1986-01-01

The dynamics of a manipulator with three rotatinal kinematic pairs having parallel axes are analyzed, for application in an industrial robot. The system of Lagrange equations of the second kind, describing the motion of such a mechanism in terms of kinetic energy in generalized coordinates, is reduced to equations of motion in terms of Newton's laws. These are useful not only for either determining the moments of force couples which will produce a prescribed motion or, conversely determining the motion which given force couples will produce but also for solving optimization problems under constraints in both cases and for estimating dynamic errors. As a specific example, a manipulator with all three axes of vertical rotation is considered. The performance of this manipulator, namely the parameters of its motion as functions of time, is compared with that of a manipulator having one rotational and two translational kinematic pairs. Computer aided simulation of their motion on the basis of ideal models, with all three links represented by identical homogeneous bars, has yielded velocity time diagrams which indicate that the manipulator with three rotational pairs is 4.5 times faster.

Anisotropic effects in a powder oriented YBCO sample using a three axes magnetometer

Energy Technology Data Exchange (ETDEWEB)

Boudissa, M. [Universite Ferhat Abbas, Faculte des Sciences de l' Ingenieur, Setif (Algeria); Halimi, R. [Universite Mentouri, Unite de Recherche de Physique des Materiaux, Constantine (Algeria); Senoussi, S. [Universite Paris-Sud, Laboratoire de Physique des Solides, Orsay (France)

2006-09-15

To measure the components of the magnetization vector along the XYZ directions of a reference frame, in the superconducting materials, we have conceived a three axes magnetometer, with a detection system equipped with three series of pick-up coils with axes parallel to the three directions X,Y, and Z. We describe in this paper the details of the design and the method of measurement, with some results obtained by magnetic measurements on samples of oriented YBCO powder, with size of the grains between 20 {mu}m and 40 {mu}m, for values of the angle {theta} between the magnetic field H and the c-axis, between 0 and 90 and for values of fields up to 12 T. The direct measurement of the Z and the XY components of the irreversible magnetization vector, M{sub irr}, allowed us to observe the twin effect (channeling) on the vortex pinning observed by many authors, the evolution of the magnetization vector and to measure with a high accuracy the anisotropy factor of our samples. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Anisotropic effects in a powder oriented YBCO sample using a three axes magnetometer

International Nuclear Information System (INIS)

Boudissa, M.; Halimi, R.; Senoussi, S.

2006-01-01

To measure the components of the magnetization vector along the XYZ directions of a reference frame, in the superconducting materials, we have conceived a three axes magnetometer, with a detection system equipped with three series of pick-up coils with axes parallel to the three directions X,Y, and Z. We describe in this paper the details of the design and the method of measurement, with some results obtained by magnetic measurements on samples of oriented YBCO powder, with size of the grains between 20 μm and 40 μm, for values of the angle θ between the magnetic field H and the c-axis, between 0 and 90 and for values of fields up to 12 T. The direct measurement of the Z and the XY components of the irreversible magnetization vector, M irr , allowed us to observe the twin effect (channeling) on the vortex pinning observed by many authors, the evolution of the magnetization vector and to measure with a high accuracy the anisotropy factor of our samples. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Defining a set of standardised outcome measures for newly diagnosed patients with multiple myeloma using the Delphi consensus method: the IMPORTA project.

Science.gov (United States)

Blade, Joan; Calleja, Miguel Ángel; Lahuerta, Juan José; Poveda, José Luis; de Paz, Héctor David; Lizán, Luis

2018-02-22

To define a standard set of outcomes and the most appropriate instruments to measure them for managing newly diagnosed patients with multiple myeloma (MM). A literature review and five discussion groups facilitated the design of two-round Delphi questionnaire. Delphi panellists (haematologists, hospital pharmacists and patients) were identified by the scientific committee, the Spanish Program of Haematology Treatments Foundation, the Spanish Society of Hospital Pharmacies and the Spanish Community of Patients with MM. Panellist's perception about outcomes' suitability and feasibility of use was assessed on a seven-point Likert scale. Consensus was reached when at least 75% of the respondents reached agreement or disagreement. A scientific committee led the project. Fifty-one and 45 panellists participated in the first and second Delphi rounds, respectively. Consensus was reached to use overall survival, progression-free survival, minimal residual disease and treatment response to assess survival and disease control. Panellists agreed to measure health-related quality of life, pain, performance status, fatigue, psychosocial status, symptoms, self-perception on body image, sexuality and preferences/satisfaction. However, panellist did not reach consensus about the feasibility of assessing in routine practice psychosocial status, symptoms, self-perception on body image and sexuality. Consensus was reached to collect patient-reported outcomes through the European Organisation for the Research and Treatment of Cancer (EORTC) Quality of Life Questionnaire (QLQ) Core questionnaire 30 (C30), three items from EORTC-QLQ-Multiple Myeloma (MY20) and EORTC-QLQ-Breast Cancer (BR23), pain Visual Analogue Scale, Morisky-Green and ad hoc questions about patients' preferences/satisfaction. A consensual standard set of outcomes for managing newly diagnosed patients with MM has been defined. The feasibility of its implementation in routine practice will be assessed in a future pilot

Strongly Coupled Fluid-Body Dynamics in the Immersed Boundary Projection Method

Science.gov (United States)

Wang, Chengjie; Eldredge, Jeff D.

2014-11-01

A computational algorithm is developed to simulate dynamically coupled interaction between fluid and rigid bodies. The basic computational framework is built upon a multi-domain immersed boundary method library, whirl, developed in previous work. In this library, the Navier-Stokes equations for incompressible flow are solved on a uniform Cartesian grid by the vorticity-based immersed boundary projection method of Colonius and Taira. A solver for the dynamics of rigid-body systems is also included. The fluid and rigid-body solvers are strongly coupled with an iterative approach based on the block Gauss-Seidel method. Interfacial force, with its intimate connection with the Lagrange multipliers used in the fluid solver, is used as the primary iteration variable. Relaxation, developed from a stability analysis of the iterative scheme, is used to achieve convergence in only 2-4 iterations per time step. Several two- and three-dimensional numerical tests are conducted to validate and demonstrate the method, including flapping of flexible wings, self-excited oscillations of a system of linked plates and three-dimensional propulsion of flexible fluked tail. This work has been supported by AFOSR, under Award FA9550-11-1-0098.

Determination of Rectification Corrections for Semi Gantry Crane Rail Axes in the Local 3D Coordinate System

Directory of Open Access Journals (Sweden)

Filipiak Daria

2015-02-01

Full Text Available Electronic tacheometers are currently the standard instruments used in geodetic work, including also geodetic engineering measurements. The main advantage connected with this equipment is among others high accuracy of the measurement and thus high accuracy of the final determinations represented for example by the points’ coordinates. One of many applications of the tacheometers is the measurement of crane rail axes. This measurement is based on polar method and it allows to get the spatial coordinates of points in 3D local system. The standard technology of measurement of crane rail axes and development of its calculations’ results is well-known and widely presented in the subject literature. At the same time new methods of observations results evaluation are developing.

Accuracy of Body Mass Index-defined Obesity Status in US Firefighters

OpenAIRE

Jitnarin, Nattinee; Poston, Walker S.C.; Haddock, Christopher K.; Jahnke, Sara A.; Day, Rena S.

2014-01-01

Obesity is a significant problem affecting United States (US) firefighters. While body mass index (BMI) is widely used to diagnose obesity, its use for this occupational group has raised concerns about validity. We examined rates and types of misclassification of BMI-based obesity status compared to body fat percentage (BF%) and waist circumference (WC). Male career firefighters (N = 994) from 20 US departments completed all three body composition assessments. Mean BMI, BF%, and WC were 29 kg...

Defining Project Purchasing Activities - Exemplified by the Purchasing Practices in Offshore Wind Farm Projects

DEFF Research Database (Denmark)

Lutz, Salla

and limited learning outcomes from one project to another. Furthermore, the study reveals the importance of a more holistic approach to project purchasing practices by focusing on the entire life cycle of a project. Managerially it helps selling companies to understand the peculiar buying phases...

Defining Investment Additionality for CDM projects - practical approaches

International Nuclear Information System (INIS)

Greiner, Sandra; Michaelowa, Axel

2003-01-01

The environmental integrity of the CDM under the Kyoto Protocol depends on the possibility to avoid giving emission credits to projects that would have happened anyway. Whether and how 'Investment Additionality' of CDM projects has to be determined is currently a part of climate negotiations. We discuss the rationale of companies to invest in projects and analyse possible criteria to determine Investment Additionality from a theoretical point of view. Differences in the type of investment call for the application of different criteria. Although some criteria are better than others, no single criterion can outweigh the others in all respects. We therefore suggest a scheme for additionality testing that aims at matching types of investment and criteria in a sensible way. Criteria are evaluated on the grounds of robustness to manipulation, degree of coverage and appropriateness for testing the investment decision under consideration

Integrated multi-resource planning and scheduling in engineering project

Directory of Open Access Journals (Sweden)

Samer Ben Issa

2017-01-01

Full Text Available Planning and scheduling processes in project management are carried out sequentially in prac-tice, i.e. planning project activities first without visibility of resource limitation, and then schedul-ing the project according to these pre-planned activities. This is a need to integrate these two pro-cesses. In this paper, we use Branch and Bound approach for generating all the feasible and non-feasible project schedules with/without activity splitting, and with a new criterion called “the Minimum Moments of Resources Required around X-Y axes (MMORR”, we select the best feasible project schedule to integrate plan processing and schedule processing for engineering projects. The results illustrate that this integrated approach can effectively select the best feasible project schedule among alternatives, improves the resource utilization, and shortens the project lead time.

New Mercedes-Benz Roadster - car body: Body concept, aerodynamics and vibration behaviour

Energy Technology Data Exchange (ETDEWEB)

Huber, G.; Goetz, H.; Schwede, W.

1989-04-01

The new convertible series from Mercedes-Benz has been developed among other things, with the objective of setting new standards for open cars, especially in the area of bodywork design. To achieve this objective with this highly complex car, the design of the bodywork has been extremely systematically defined through the stages, from the general specification framework via the development sector's internal specification outline to the project description. The project was optimised in its sequence with regard to technics, costs, deadlines and availability of capacity. Because of the high performance of the new convertible, for which unrestricted everyday usefulness has been a top-priority demand, its aerodynamic design is first and foremost geared to ensure a high degree of road-holding and crosswind stability, the basic model's drag coefficient being c/sub w/=0,32. To effectively complement the comfort-enhancing appointments and controls, which have been designed with reference to S-class standards, in the development of the body-in-white, very exacting demands were made on torsional rigidity and natural frequency under torsional excitation with a view to provide excellent vibration behaviour. The body-in-white, complemented by special features such as struts underneath the front and the rear axle point forward in this respect.

Slip Casting and Green Body Evaluation of 6% Yttria, 2% Alumina Silicon Nitride

Science.gov (United States)

1991-12-01

Slurries containing this lignosulphonate wood derivative did not exhibit uniform rheological behavior. Some of the slips with high solids...the Figure 3 axes for easier comparison. Reference 2 also notes a marked shear-sensitivity decrease in slurries containing a lignosulphonate dispersant...Any advantage to using lignosulphonate dispersants must be weighed against the difficulty of burning the additives out of the resultant green bodies

Prolonged air-breathing and recovery modify the thyroid and interrenal axes in climbing perch (Anabas testudineus)

NARCIS (Netherlands)

Peter, M.C.S.; Wendelaar Bonga, S.E.

2007-01-01

To examine the response of thyroid and intrenal axes to hydromineral and metabolic responses in air-breathing fish during their territorial migration, we quantified several physiological markers in the tropical obligate air-breathing perch (Anabas testudineus) during air breathing on land and in

Radiometric control of the position of blind holes axes in graphite blocks of high temperature reactors

International Nuclear Information System (INIS)

Boutaine, J.L.; Bujas, R.; Lemonnier, A.; Tortel, J.

1976-01-01

The principles of a radiometric method intended for controlling the positions of blind hole axes are given. A comparison is made between radiometry and radiography and the performances obtained using a thulium 170 source are described. The automation capabilities are discussed [fr

Obesity as defined by waist circumference but not body mass index is associated with higher renal mass complexity.

Science.gov (United States)

Bertrand, Laura A; Thomas, Lewis J; Li, Peng; Buchta, Claire M; Boi, Shannon K; Orlandella, Rachael M; Brown, James A; Nepple, Kenneth G; Norian, Lyse A

2017-11-01

Obesity, typically defined as a body mass index (BMI)≥30kg/m 2 , is an established risk factor for renal cell carcinoma (RCC) but is paradoxically linked to less advanced disease at diagnosis and improved outcomes. However, BMI has inherent flaws, and alternate obesity-defining metrics that emphasize abdominal fat are available. We investigated 3 obesity-defining metrics, to better examine the associations of abdominal fat vs. generalized obesity with renal tumor stage, grade, or R.E.N.A.L. nephrometry score. In a prospective cohort of 99 subjects with renal masses undergoing resection and no evidence of metastatic disease, obesity was assessed using 3 metrics: body mass index (BMI), radiographic waist circumference (WC), and retrorenal fat (RRF) pad distance. R.E.N.A.L. nephrometry scores were calculated based on preoperative CT or MRI. Univariate and multivariate analyses were performed to identify associations between obesity metrics and nephrometry score, tumor grade, and tumor stage. In the 99 subjects, surgery was partial nephrectomy in 51 and radical nephrectomy in 48. Pathology showed benign masses in 11 and RCC in 88 (of which 20 had stage T3 disease). WC was positively correlated with nephrometry score, even after controlling for age, sex, race, and diabetes status (P = 0.02), whereas BMI and RRF were not (P = 0.13, and P = 0.57, respectively). WC in stage T2/T3 subjects was higher than in subjects with benign masses (P = 0.03). In contrast, subjects with Fuhrman grade 1 and 2 tumors had higher BMI (Pobesity measured by WC, but not BMI or RRF, is associated with increased renal mass complexity. Tumor Fuhrman grade exhibited a different trend, with both high WC and BMI associated with lower-grade tumors. Our findings indicate that WC and BMI are not interchangeable obesity metrics. Further evaluation of RCC-specific outcomes using WC vs. BMI is warranted to better understand the complex relationship between general vs. abdominal obesity and RCC

Gaze direction effects on perceptions of upper limb kinesthetic coordinate system axes.

Science.gov (United States)

Darling, W G; Hondzinski, J M; Harper, J G

2000-12-01

The effects of varying gaze direction on perceptions of the upper limb kinesthetic coordinate system axes and of the median plane location were studied in nine subjects with no history of neuromuscular disorders. In two experiments, six subjects aligned the unseen forearm to the trunk-fixed anterior-posterior (a/p) axis and earth-fixed vertical while gazing at different visual targets using either head or eye motion to vary gaze direction in different conditions. Effects of support of the upper limb on perceptual errors were also tested in different conditions. Absolute constant errors and variable errors associated with forearm alignment to the trunk-fixed a/p axis and earth-fixed vertical were similar for different gaze directions whether the head or eyes were moved to control gaze direction. Such errors were decreased by support of the upper limb when aligning to the vertical but not when aligning to the a/p axis. Regression analysis showed that single trial errors in individual subjects were poorly correlated with gaze direction, but showed a dependence on shoulder angles for alignment to both axes. Thus, changes in position of the head and eyes do not influence perceptions of upper limb kinesthetic coordinate system axes. However, dependence of the errors on arm configuration suggests that such perceptions are generated from sensations of shoulder and elbow joint angle information. In a third experiment, perceptions of median plane location were tested by instructing four subjects to place the unseen right index fingertip directly in front of the sternum either by motion of the straight arm at the shoulder or by elbow flexion/extension with shoulder angle varied. Gaze angles were varied to the right and left by 0.5 radians to determine effects of gaze direction on such perceptions. These tasks were also carried out with subjects blind-folded and head orientation varied to test for effects of head orientation on perceptions of median plane location. Constant

Improved dq-Axes Model of PMSM Considering Airgap Flux Harmonics and Saturation

DEFF Research Database (Denmark)

Fasil, Muhammed; Antaloae, Ciprian; Mijatovic, Nenad

2016-01-01

In this work, the classical linear model of a permanent magnet synchronous motor (PMSM) is modified by adding d and q-axes harmonic inductances so that the modified model can consider non-linearities present in an interior permanent magnet (IPM) motor. Further, a method has been presented to assess...... the effect of saturation and cross-saturation on constant torque curves of PMSM. Two IPM motors with two different rotor topologies and different specifications are designed to evaluate the effect of saturation on synchronous and harmonic inductances, and on operating points of the machines...

Optical Signature Analysis of Tumbling Rocket Bodies via Laboratory Measurements

Science.gov (United States)

Cowardin, H.; Lederer, S.; Liou, J.-C.

2012-01-01

The NASA Orbital Debris Program Office has acquired telescopic lightcurve data on massive intact objects, specifically spent rocket bodies, in order to ascertain tumble rates in support of the Active Debris Removal (ADR) task to help remediate the LEO environment. Rotation rates are needed to plan and develop proximity operations for potential future ADR operations. To better characterize and model optical data acquired from ground-based telescopes, the Optical Measurements Center (OMC) at NASA/JSC emulates illumination conditions in space using equipment and techniques that parallel telescopic observations and source-target-sensor orientations. The OMC employs a 75-watt Xenon arc lamp as a solar simulator, an SBIG CCD camera with standard Johnson/Bessel filters, and a robotic arm to simulate an object's position and rotation. The light source is mounted on a rotary arm, allowing access any phase angle between 0 -- 360 degrees. The OMC does not attempt to replicate the rotation rates, but focuses on how an object is rotating as seen from multiple phase angles. The two targets studied are scaled (1:48), SL-8 Cosmos 3M second stages. The first target is painted in the standard government "gray" scheme and the second target is primary white, as used for commercial missions. This paper summarizes results of the two scaled rocket bodies, each rotated about two primary axes: (a) a spin-stabilized rotation and (b) an end-over-end rotation. The two rotation states are being investigated as a basis for possible spin states of rocket bodies, beginning with simple spin states about the two primary axes. The data will be used to create a database of potential spin states for future works to convolve with more complex spin states. The optical signatures will be presented for specific phase angles for each rocket body and shown in conjunction with acquired optical data from multiple telescope sources.

Analysis of mitochondrial 3D-deformation in cardiomyocytes during active contraction reveals passive structural anisotropy of orthogonal short axes.

Directory of Open Access Journals (Sweden)

Yael Yaniv

Full Text Available The cardiomyocyte cytoskeleton, composed of rigid and elastic elements, maintains the isolated cell in an elongated cylindrical shape with an elliptical cross-section, even during contraction-relaxation cycles. Cardiomyocyte mitochondria are micron-sized, fluid-filled passive spheres distributed throughout the cell in a crystal-like lattice, arranged in pairs sandwiched between the sarcomere contractile machinery, both longitudinally and radially. Their shape represents the extant 3-dimensional (3D force-balance. We developed a novel method to examine mitochondrial 3D-deformation in response to contraction and relaxation to understand how dynamic forces are balanced inside cardiomyocytes. The variation in transmitted light intensity induced by the periodic lattice of myofilaments alternating with mitochondrial rows can be analyzed by Fourier transformation along a given cardiomyocyte axis to measure mitochondrial deformation along that axis. This technique enables precise detection of changes in dimension of ∼1% in ∼1 µm (long-axis structures with 8 ms time-resolution. During active contraction (1 Hz stimulation, mitochondria deform along the length- and width-axes of the cell with similar deformation kinetics in both sarcomere and mitochondrial structures. However, significant deformation anisotropy (without hysteresis was observed between the orthogonal short-axes (i.e., width and depth of mitochondria during electrical stimulation. The same degree of deformation anisotropy was also found between the myocyte orthogonal short-axes during electrical stimulation. Therefore, the deformation of the mitochondria reflects the overall deformation of the cell, and the apparent stiffness and stress/strain characteristics of the cytoskeleton differ appreciably between the two cardiomyocyte orthogonal short-axes. This method may be applied to obtaining a better understanding of the dynamic force-balance inside cardiomyocytes and of changes in the

CRA-1 uncovers a double-strand break-dependent pathway promoting the assembly of central region proteins on chromosome axes during C. elegans meiosis.

Science.gov (United States)

Smolikov, Sarit; Schild-Prüfert, Kristina; Colaiácovo, Mónica P

2008-06-06

The synaptonemal complex (SC), a tripartite proteinaceous structure that forms between homologous chromosomes during meiosis, is crucial for faithful chromosome segregation. Here we identify CRA-1, a novel and conserved protein that is required for the assembly of the central region of the SC during C. elegans meiosis. In the absence of CRA-1, central region components fail to extensively localize onto chromosomes at early prophase and instead mostly surround the chromatin at this stage. Later in prophase, central region proteins polymerize along chromosome axes, but for the most part fail to connect the axes of paired homologous chromosomes. This defect results in an inability to stabilize homologous pairing interactions, altered double-strand break (DSB) repair progression, and a lack of chiasmata. Surprisingly, DSB formation and repair are required to promote the polymerization of the central region components along meiotic chromosome axes in cra-1 mutants. In the absence of both CRA-1 and any one of the C. elegans homologs of SPO11, MRE11, RAD51, or MSH5, the polymerization observed along chromosome axes is perturbed, resulting in the formation of aggregates of the SC central region proteins. While radiation-induced DSBs rescue this polymerization in cra-1; spo-11 mutants, they fail to do so in cra-1; mre-11, cra-1; rad-51, and cra-1; msh-5 mutants. Taken together, our studies place CRA-1 as a key component in promoting the assembly of a tripartite SC structure. Moreover, they reveal a scenario in which DSB formation and repair can drive the polymerization of SC components along chromosome axes in C. elegans.

Identifying Issues in Applying Integrated Project Delivery to Domestic Nuclear Power Plant Construction Projects

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Joo [Korean Nuclear Society, Daejeon (Korea, Republic of)

2016-05-15

Integrated Project Delivery (IPD) is defined as that people, systems, business structures, and practices of key stakeholders are incorporated into a single-team, with a single process, which executes a project in a way of optimizing the project's outcome, increasing values delivered to the end user, reducing waste, and maximizing efficiency throughout the phases of engineering to construction. The researcher had carried out literature review in terms of IPD to identify major characteristics of IPD which are presented in the following section and had compared such characteristics against peculiarities of nuclear power plant (NPP) construction projects in order to shed light on obstacles in possible application of IPD method to domestic NPP construction projects in the coming days. In this research, three (3) major characteristics of IPD were identified: 1) key stakeholders signing one balanced contract, forming de facto one body, sharing risk and reward 2) an integrated project team being formed in the early stage of a project and providing input to minimize time and cost loss from rework downstream 3) team members co-locating, having open and direct communication, making decisions on time, and pursuing the success of the project itself.

A Nested Case-Control Study of Metabolically Defined Body Size Phenotypes and Risk of Colorectal Cancer in the European Prospective Investigation into Cancer and Nutrition (EPIC.

Directory of Open Access Journals (Sweden)

Neil Murphy

2016-04-01

Full Text Available Obesity is positively associated with colorectal cancer. Recently, body size subtypes categorised by the prevalence of hyperinsulinaemia have been defined, and metabolically healthy overweight/obese individuals (without hyperinsulinaemia have been suggested to be at lower risk of cardiovascular disease than their metabolically unhealthy (hyperinsulinaemic overweight/obese counterparts. Whether similarly variable relationships exist for metabolically defined body size phenotypes and colorectal cancer risk is unknown.The association of metabolically defined body size phenotypes with colorectal cancer was investigated in a case-control study nested within the European Prospective Investigation into Cancer and Nutrition (EPIC study. Metabolic health/body size phenotypes were defined according to hyperinsulinaemia status using serum concentrations of C-peptide, a marker of insulin secretion. A total of 737 incident colorectal cancer cases and 737 matched controls were divided into tertiles based on the distribution of C-peptide concentration amongst the control population, and participants were classified as metabolically healthy if below the first tertile of C-peptide and metabolically unhealthy if above the first tertile. These metabolic health definitions were then combined with body mass index (BMI measurements to create four metabolic health/body size phenotype categories: (1 metabolically healthy/normal weight (BMI < 25 kg/m2, (2 metabolically healthy/overweight (BMI ≥ 25 kg/m2, (3 metabolically unhealthy/normal weight (BMI < 25 kg/m2, and (4 metabolically unhealthy/overweight (BMI ≥ 25 kg/m2. Additionally, in separate models, waist circumference measurements (using the International Diabetes Federation cut-points [≥80 cm for women and ≥94 cm for men] were used (instead of BMI to create the four metabolic health/body size phenotype categories. Statistical tests used in the analysis were all two-sided, and a p-value of <0.05 was

Gudrun-Axeli Knapp: Im Widerstreit. Feministische Theorie in Bewegung. Wiesbaden: Springer VS 2012.

Directory of Open Access Journals (Sweden)

Tina Jung

2012-12-01

Full Text Available Gudrun-Axeli Knapp hat mit ihrem Sammelband eine beeindruckende und überaus umfangreiche Werkschau aus 25 Jahren feministischer Theoriebildung vorgelegt. Der Band ist in vier thematische Blöcke unterteilt, die um Weiblichkeitskritik, feministische Aneignungen der Kritischen Theorie, Intersektionalität und die Frage nach der Gestalt feministischer (theoretischer Kritik kreisen. Dabei überzeugt die Autorin nicht nur durch ihre sorgfältigen wie streitbaren Argumentationen und Auseinandersetzungen im Terrain feministischer Theorie; reizvoll gestaltet sich überdies das Nachspüren jener Denkfigur über die Einzelbeiträge des Sammelbands hinweg, die auch den Titel des Bandes prägt: „im Widerstreit“. Damit legt Knapp auch Umrisse einer Programmatik feministischer Kritik vor.With her collection, Gudrun-Axeli Knapp presents an impressive and exceptionally extensive retrospective on 25 years of feminist theorizing. The volume is subdivided into four subject areas, which deal with femininity criticism, feminist appropriations of critical theory, intersectionality, and the question of the nature of feminist (theoretical criticism. The author does not only impress with her thorough yet also provocative argumentations and examinations of the terrain of feminist theory; but the figure of thought that she traces across all articles and that coins the collection’s title is also very appealing: “in conflict”. In doing so, Knapp does also outline aims and objectives of feminist criticism.

Using molecular principal axes for structural comparison: determining the tertiary changes of a FAB antibody domain induced by antigenic binding

Directory of Open Access Journals (Sweden)

Silverman B David

2007-11-01

Full Text Available Abstract Background Comparison of different protein x-ray structures has previously been made in a number of different ways; for example, by visual examination, by differences in the locations of secondary structures, by explicit superposition of structural elements, e.g. α-carbon atom locations, or by procedures that utilize a common symmetry element or geometrical feature of the structures to be compared. Results A new approach is applied to determine the structural changes that an antibody protein domain experiences upon its interaction with an antigenic target. These changes are determined with the use of two different, however comparable, sets of principal axes that are obtained by diagonalizing the second-order tensors that yield the moments-of-geometry as well as an ellipsoidal characterization of domain shape, prior to and after interaction. Determination of these sets of axes for structural comparison requires no internal symmetry features of the domains, depending solely upon their representation in three-dimensional space. This representation may involve atomic, Cα, or residue centroid coordinates. The present analysis utilizes residue centroids. When the structural changes are minimal, the principal axes of the domains, prior to and after interaction, are essentially comparable and consequently may be used for structural comparison. When the differences of the axes cannot be neglected, but are nevertheless slight, a smaller relatively invariant substructure of the domains may be utilized for comparison. The procedure yields two distance metrics for structural comparison. First, the displacements of the residue centroids due to antigenic binding, referenced to the ellipsoidal principal axes, are noted. Second, changes in the ellipsoidal distances with respect to the non-interacting structure provide a direct measure of the spatial displacements of the residue centroids, towards either the interior or exterior of the domain

Motion-oriented 3D analysis of body measurements

Science.gov (United States)

Loercher, C.; Morlock, S.; Schenk, A.

2017-10-01

The aim of this project is to develop an ergonomically based and motion-oriented size system. New concepts are required in order to be able to deal competently with complex requirements of function-oriented workwear and personal protective equipment (PPE). Body dimensions change through movement, which are basis for motion optimized clothing development. This affects fit and ergonomic comfort. The situation has to be fundamentally researched in order to derive well-founded anthropometric body data, taking into account kinematic requirements of humans and to define functional dimensions for clothing industry. Research focus shall be on ergonomic design of workwear and PPE. There are huge differences in body forms, proportions and muscle manifestations between genders. An improved basic knowledge can be provided as a result, supporting development as well as sales of motion-oriented clothing with perfect fit for garment manufacturers.

Defining Projects to Integrate Evolving Team Fundamentals and Project Management Skills

Science.gov (United States)

Smith, Harold, III; Smarkusky, Debra; Corrigall, Elizabeth

2008-01-01

Industry has indicated the desire for academic programs to produce graduates that are well-versed in collaborative problem solving and general project management concepts in addition to technical skills. The primary focus of a curriculum is typically centered on the technical training with minimal attention given to coalescing team and project…

Transnational Body Projects: Media Representations of Cosmetic Surgery Tourism in Argentina and the United States

Directory of Open Access Journals (Sweden)

Erynn Masi de Casanova

2015-08-01

Full Text Available Cosmetic surgery tourism (CST is part of the growing trend known as medical tourism. As people in the global North travel to less affluent countries to modify their bodies through cosmetic surgery, their transnational body projects are influenced by both economic "materialities" and traveling cultural "imaginaries." This article presents a content analysis of media representations of cosmetic surgery tourism in a major country sending patient-tourists (the United States and a popular receiving country (Argentina. The power relations of globalization appear to be played out in the media. U.S. sources assert U.S. hegemony through a discourse emphasizing the risks of CST in the global South, in contrast with medical excellence in the U.S. Argentine sources portray Argentina as a country struggling to gain a foothold in the global economy, but staking a claim on modernity through cultural and professional resources. The analyzed articles also offer a glimpse of how patient-tourists fuel sectors of the global economy by placing their bodies at the forefront, seeking to merge medical procedures and touristic pleasures. There is a gender dimension to these portrayals, as women are especially likely to engage in CST. Their transnational body projects are tainted by negative media portrayals, which represent them as ignorant, uninformed, and driven mainly by the low price of surgery overseas. Our comparative approach sheds light on converging and diverging perspectives on both ends of the cosmetic surgery tourism chain, showing that patterns in CST portrayals differ according to the position of a country in the world-system.

Dynamic Anthropometry – Deffning Protocols for Automatic Body Measurement

Directory of Open Access Journals (Sweden)

Slavenka Petrak

2017-12-01

Full Text Available The paper presents the research on possibilities of protocol development for automatic computer-based determination of measurements on a 3D body model in defined dynamic positions. Initially, two dynamic body positions were defined for the research on dimensional changes of targeted body lengths and surface segments during body movement from basic static position into a selected dynamic body position. The assumption was that during body movement, specifi c length and surface dimensions would change significantly from the aspect of clothing construction and functionality of a garment model. 3D body scanning of a female test sample was performed in basic static and two defined dynamic positions. 3D body models were processed and measurement points were defined as a starting point for the determination of characteristic body measurements. The protocol for automatic computer measurement was defined for every dynamic body position by the systematic set of activities based on determined measurement points. The verification of developed protocols was performed by automatic determination of defined measurements on the test sample and by comparing the results with the conventional manual measurement.

Exploration fonctionnelle de l'axe corticotrope de la brebis atteinte de tremblante

OpenAIRE

Galéa, Jessie

2001-01-01

L'objectif de cette étude expérimentale était d'identifier l'origine de l'augmentation de production de cortisol par les glandes surrénales induite par la tremblante grâce à une exploration fonctionnelle de l'axe hypothalamo-hypophyso-surrénalien. Pour cela les cinétiques temporelles des concentrations plasmatiques d'ACTH des brebis atteintes de tremblante ont été analysées et le taux de production d'ACTH a été déterminé chez 14 brebis (6 brebis saines et 8 brebis atteintes de tremblante). De...

Optical implementation of multifocal programmable lens with single and multiple axes

Energy Technology Data Exchange (ETDEWEB)

Romero, Lenny A; Millan, Maria S; Perez-Cabre, Elisabet, E-mail: lenny.alexandra.romero@upc.edu [Optics and Optometry Dep. Technical University of Catalonia Violinista Vellsola 37, 08222 Terrassa (Spain)

2011-01-01

In this work we analyse the generation of a diffractive optical element (DOE) consisting of a multifocal Fresnel lens by means of an LCoS (liquid cristal on silicon) spatial light modulator (SLM). The multifocal lens is composed of a set of lenses of different focal length that share a common optical axis (coaxial combination) or have different axes in parallel (multi-axis combination). For both configurations, we present several ways to combine the phase distributions for three lenses with different focal lengths (f1, f2, f3), into a single-phase distribution addressed to the SLM. Numerical simulations were carried out along with the experimental analysis to corroborate the results.

Nine-Month-Old Infants Prefer Unattractive Bodies over Attractive Bodies

Science.gov (United States)

Heron-Delaney, Michelle; Quinn, Paul C.; Lee, Kang; Slater, Alan M.; Pascalis, Olivier

2013-01-01

Infant responses to adult-defined unattractive male body shapes versus attractive male body shapes were assessed using visual preference and habituation procedures. Looking behavior indicated that 9-month-olds have a preference for unattractive male body shapes over attractive ones; however, this preference is demonstrated only when head…

Establishing the Embryonic Axes: Prime Time for Teratogenic Insults

Directory of Open Access Journals (Sweden)

Thomas W. Sadler

2017-09-01

Full Text Available A long standing axiom in the field of teratology states that the teratogenic period, when most birth defects are produced, occurs during the third to eighth weeks of development post-fertilization. Any insults prior to this time are thought to result in a slowing of embryonic growth from which the conceptus recovers or death of the embryo followed by spontaneous abortion. However, new insights into embryonic development during the first two weeks, including formation of the anterior-posterior, dorsal-ventral, and left-right axes, suggests that signaling pathways regulating these processes are prime targets for genetic and toxic insults. Establishment of the left-right (laterality axis is particularly sensitive to disruption at very early stages of development and these perturbations result in a wide variety of congenital malformations, especially heart defects. Thus, the time for teratogenic insults resulting in birth defects should be reset to include the first two weeks of development.

Distinct projection targets define subpopulations of mouse brainstem vagal neurons that express the autism-associated MET receptor tyrosine kinase.

Science.gov (United States)

Kamitakahara, Anna; Wu, Hsiao-Huei; Levitt, Pat

2017-12-15

Detailed anatomical tracing and mapping of the viscerotopic organization of the vagal motor nuclei has provided insight into autonomic function in health and disease. To further define specific cellular identities, we paired information based on visceral connectivity with a cell-type specific marker of a subpopulation of neurons in the dorsal motor nucleus of the vagus (DMV) and nucleus ambiguus (nAmb) that express the autism-associated MET receptor tyrosine kinase. As gastrointestinal disturbances are common in children with autism spectrum disorder (ASD), we sought to define the relationship between MET-expressing (MET+) neurons in the DMV and nAmb, and the gastrointestinal tract. Using wholemount tissue staining and clearing, or retrograde tracing in a MET EGFP transgenic mouse, we identify three novel subpopulations of EGFP+ vagal brainstem neurons: (a) EGFP+ neurons in the nAmb projecting to the esophagus or laryngeal muscles, (b) EGFP+ neurons in the medial DMV projecting to the stomach, and (b) EGFP+ neurons in the lateral DMV projecting to the cecum and/or proximal colon. Expression of the MET ligand, hepatocyte growth factor (HGF), by tissues innervated by vagal motor neurons during fetal development reveal potential sites of HGF-MET interaction. Furthermore, similar cellular expression patterns of MET in the brainstem of both the mouse and nonhuman primate suggests that MET expression at these sites is evolutionarily conserved. Together, the data suggest that MET+ neurons in the brainstem vagal motor nuclei are anatomically positioned to regulate distinct portions of the gastrointestinal tract, with implications for the pathophysiology of gastrointestinal comorbidities of ASD. © 2017 Wiley Periodicals, Inc.

BAD-LAMP defines a subset of early endocytic organelles in subpopulations of cortical projection neurons.

Science.gov (United States)

David, Alexandre; Tiveron, Marie-Catherine; Defays, Axel; Beclin, Christophe; Camosseto, Voahirana; Gatti, Evelina; Cremer, Harold; Pierre, Philippe

2007-01-15

The brain-associated LAMP-like molecule (BAD-LAMP) is a new member of the family of lysosome associated membrane proteins (LAMPs). In contrast to other LAMPs, which show a widespread expression, BAD-LAMP expression in mice is confined to the postnatal brain and therein to neuronal subpopulations in layers II/III and V of the neocortex. Onset of expression strictly parallels cortical synaptogenesis. In cortical neurons, the protein is found in defined clustered vesicles, which accumulate along neurites where it localizes with phosphorylated epitopes of neurofilament H. In primary neurons, BAD-LAMP is endocytosed, but is not found in classical lysosomal/endosomal compartments. Modification of BAD-LAMP by addition of GFP revealed a cryptic lysosomal retention motif, suggesting that the cytoplasmic tail of BAD-LAMP is actively interacting with, or modified by, molecules that promote its sorting away from lysosomes. Analysis of BAD-LAMP endocytosis in transfected HeLa cells provided evidence that the protein recycles to the plasma membrane through a dynamin/AP2-dependent mechanism. Thus, BAD-LAMP is an unconventional LAMP-like molecule and defines a new endocytic compartment in specific subtypes of cortical projection neurons. The striking correlation between the appearance of BAD-LAMP and cortical synatogenesis points towards a physiological role of this vesicular determinant for neuronal function.

A physical model study of the travel times and reflection points of SH-waves reflected from transversely isotropic media with tilted symmetry axes

Science.gov (United States)

Sun, Li-Chung; Chang, Young-Fo; Chang, Chih-Hsiung; Chung, Chia-Lung

2012-05-01

In reflection seismology, detailed knowledge of how seismic waves propagate in anisotropic media is important for locating reservoirs accurately. The SH-wave possesses a pure mode polarization which does not convert to P- and SV-waves when reflecting from a horizontal interface, and vice versa. The simplicity of the SH-wave thus provides an easy way to view the details of SH-wave propagation in anisotropic media. In this study, we attempt to inspect the theoretical reflection moveouts of SH-waves reflected from transversely isotropic (TI) layers with tilted symmetry axes and to verify the reflection point, which could be shifted away from the common midpoint (CMP), by numerical calculations and physical modelling. In travel time-offset analyses, the moveout curves of SH-waves reflected from horizontal TI media (TIM) with different tilted angles of symmetry axes are computed by the TI modified hyperbolic equation and Fermat's principle, respectively. It turns out that both the computed moveout curves are similar and fit well to the observed physical data. The reflection points of SH-waves for a CMP gather computed by Fermat's principle show that they are close to the CMP for TIM with the vertical and horizontal symmetry axes, but they shift away from the CMP for the other tilted angles of symmetry axes. The shifts of the reflection points of the SH-waves from the CMP were verified by physical modelling.

Ethanol exposure affects cell movement during gastrulation and induces split axes in zebrafish embryos.

Science.gov (United States)

Zhang, Ying; Shao, Ming; Wang, Lifeng; Liu, Zhongzhen; Gao, Ming; Liu, Chao; Zhang, Hongwei

2010-06-01

To explore the toxic effects of ethanol on axis formation during embryogenesis, zebrafish embryos at different developmental stages were treated with 3% ethanol for 3h. The effects of ethanol exposure appeared to be stage-dependent. The dome stage embryo was most sensible to form posterior split axes upon ethanol exposure. Morphological and histological observations and whole-mount in situ hybridization results showed that ethanol exposure at this stage caused a general gastrulation delay, and induced double notochords, double neural tubes and two sets of somites in the posterior trunk. Mechanistically, no ectopic organizer was found by examining the expression patterns of dorsoventral markers including goosecoid, chordin and eve1 at the onset of gastrulation. However, radial intercalation, epiboly and convergence extension were inhibited by ethanol exposure as revealed by cell labeling, phenotypic observation and the expression patterns of axial or paraxial markers. Further investigation showed that the cell aggregation might be affected by ethanol exposure, as indicated by the much more scattered expression pattern of chordin, eve1 and wnt11 at the early gastrula stage, and the discontinuous gsc positive cells during migration. These results imply that ethanol might affect cell movement before and during gastrulation and as a consequence, induces a split axes phenotype. Copyright 2010 ISDN. Published by Elsevier Ltd. All rights reserved.

Determination of star bodies from p-centroid bodies

Indian Academy of Sciences (India)

An immediate consequence of the definition of the p-centroid body of K is that for any .... The dual mixed volume ˜V−p(K, L) of star bodies K, L can be defined by d. −p ..... [16] Lindenstrauss J and Milman V D, Local theory of normed spaces and ...

Reinforced Airfoil Shaped Body

DEFF Research Database (Denmark)

2011-01-01

The present invention relates to an airfoil shaped body with a leading edge and a trailing edge extending along the longitudinal extension of the body and defining a profile chord, the airfoil shaped body comprising an airfoil shaped facing that forms the outer surface of the airfoil shaped body...

Considerations on the correlation between real body and body image

Directory of Open Access Journals (Sweden)

Beatrice ABALAȘEI

2017-03-01

Full Text Available very individual in the society has a representation of it’s own body in relation to the spatial cues, postural cues, time cues, etc., considered by specialists the body scheme. Throughout its development, the human being goes through different stages of organization of both the image the and body scheme. We start carrying out this study from the idea that there could be, in male individuals, a link between body representation (own image projected outwardly apparent by reference to an image presented through a questionnaire and anthropological parameters, such as body fat and body mass index. The study was conducted on a total of 28 subjects, aged 22.71 ± 2.62 years, height of 177.11 ± 6.76 cm and body weight of 73.56 ± 12.60 kg. For these subjects the body composition has been determined by electromagnetic bioimpendance technique and projection of the self was assesed through a questionnaire. After analyzing statistical data, our hypothesis was refuted by the lack of mathematical connections between the variables analyzed.

Applying Systems Thinking via Systemigrams(TM) for Defining the Body of Knowledge and Curriculum to Advance Systems Engineering (BKCASE) Project

Science.gov (United States)

2010-01-01

Systemitool to create SystemigramsTM to demonstrate a systems perspective of the issue of increasing plagiarism in the academic community. An initial set of...with notes, at www.bkcase.org. A short article on the project will also be in the December version of the INCOSE Insight. The purpose of this paper is...March 23-26, 2009, Vancouver, British Columbia, Canada. Sivadasan, S. and B. Sauser. 2009. Understanding plagiarism using boardman’s soft-systems

33 CFR 211.1 - Real estate defined.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Real estate defined. 211.1... DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN CONNECTION WITH CIVIL WORKS PROJECTS Real Estate; General § 211.1 Real estate defined. The term real estate as used in this part includes land...

The interaction between axes of inequality in studies on discrimination, stigma and HIV/AIDS: contributions to the recent international literature.

Science.gov (United States)

Monteiro, Simone S; Villela, Wilza V; Soares, Priscilla S

2013-01-01

This study aimed to conduct a systematic literature review in order to identify how recent studies have addressed the interaction between social inequality and the processes of exclusion and marginalisation related to HIV/AIDS stigma and discrimination. The review was conducted using PubMed and Scopus databases and included publications from 2008 to 2011. Of 497 summaries found in the review, 42 were selected and classified based on topic, population, axes of inequality employed, conceptualisation of stigma and relationship between stigma and vulnerability. Results demonstrated that there is a predominance of research on stigma and discrimination towards people living with HIV/AIDS, sexual and racial/ethnic minorities and migrants. The axes of inequality examined in the literature were linked to specific cultural and socio-economic dimensions and analysed as factors that behave synergistically to increase social groups' vulnerability to HIV. Half of the 42 articles viewed expression of stigma/discrimination to be the result of power dynamics that reinforce the processes of social exclusion. The other half of the articles tended to describe stigma as intrinsic to social interaction. Some researchers are making a visible effort to devise consistent theoretical and methodological approaches in order to understand stigma as a complex social process produced at the intersection of different axes of inequality. These efforts provide vital information that can inform how best to address HIV/AIDS stigma.

A 24-Hour Study of the Hypothalamo-Pituitary Axes in Huntington's Disease.

Directory of Open Access Journals (Sweden)

Eirini Kalliolia

Full Text Available Huntington's disease is an inherited neurodegenerative disorder characterised by motor, cognitive and psychiatric disturbances. Patients exhibit other symptoms including sleep and mood disturbances, muscle atrophy and weight loss which may be linked to hypothalamic pathology and dysfunction of hypothalamo-pituitary axes.We studied neuroendocrine profiles of corticotropic, somatotropic and gonadotropic hypothalamo-pituitary axes hormones over a 24-hour period in controlled environment in 15 healthy controls, 14 premanifest and 13 stage II/III Huntington's disease subjects. We also quantified fasting levels of vasopressin, oestradiol, testosterone, dehydroepiandrosterone sulphate, thyroid stimulating hormone, free triiodothyronine, free total thyroxine, prolactin, adrenaline and noradrenaline. Somatotropic axis hormones, growth hormone releasing hormone, insulin-like growth factor-1 and insulin-like factor binding protein-3 were quantified at 06:00 (fasting, 15:00 and 23:00. A battery of clinical tests, including neurological rating and function scales were performed.24-hour concentrations of adrenocorticotropic hormone, cortisol, luteinizing hormone and follicle-stimulating hormone did not differ significantly between the Huntington's disease group and controls. Daytime growth hormone secretion was similar in control and Huntington's disease subjects. Stage II/III Huntington's disease subjects had lower concentration of post-sleep growth hormone pulse and higher insulin-like growth factor-1:growth hormone ratio which did not reach significance. In Huntington's disease subjects, baseline levels of hypothalamo-pituitary axis hormones measured did not significantly differ from those of healthy controls.The relatively small subject group means that the study may not detect subtle perturbations in hormone concentrations. A targeted study of the somatotropic axis in larger cohorts may be warranted. However, the lack of significant results despite many

Frameworks for defining and managing the wilderness experience

Science.gov (United States)

Robert E. Manning

2012-01-01

A large and growing body of research on outdoor recreation and the wilderness experience has been conducted over the nearly 50 years since passage of the Wilderness Act of 1964. A number of conceptual and empirical frameworks have emerged from this body of knowledge that can be used to help define and manage the wilderness experience.

Feasibility of MRI of the fetal heart with balanced steady-state free precession sequence along fetal body and cardiac planes.

Science.gov (United States)

Saleem, Sahar N

2008-10-01

The purpose of this study was to evaluate the feasibility of imaging the fetal heart with a balanced steady-state free precession MRI sequence along the body and cardiac axes after inadequate echocardiography. After technically inadequate echocardiography, MRI was performed on 20 fetuses (mean gestational age, 24 weeks; range, 18-32 weeks) at risk of congenital heart disease. MRI was attempted along the three fetal body planes (n = 20) and cardiac axes (n = 3) without fetal sedation. The images were analyzed with an anatomic segmental approach. Each feature was classified as well visualized or poorly or not visualized. In each group, the Student's t test was used to assess the relation between visibility of fetal cardiac features and gestational age. Imaging was possible along the fetal body and cardiac axes. In the axial plane, a balanced four-chamber view was obtained in all fetuses, enabling evaluation of heart position, axis, chambers, and interventricular septum. The left and right ventricular outflow tracts were well visualized in 12 (60%) and nine (45%) of the fetuses, respectively; the three-vessel view was obtained in 10 fetuses (50%). With the combination of sagittal and coronal views, both ventricular outflow tracts were assessed in all fetuses. The superior and inferior venae cavae were identified in all fetuses, and at least one pulmonary vein was visualized in 17 fetuses (85%). There were no statistically significant differences between gestational age and lack of visualization of a cardiac feature that was attributed to fetal motion. MRI of the fetal heart with a steady-state free precession sequence in multiple planes and image analysis with an anatomic segmental approach to congenital heart disease are possible in situations that limit echocardiography.

Research Network of Tehran Defined Population: Methodology and Establishment

Directory of Open Access Journals (Sweden)

Ali-Asghar Kolahi

2015-12-01

Full Text Available Background: We need a defined population for determining prevalence and incidence of diseases, as well as conducting interventional, cohort and longitudinal studies, calculating correct and timely public health indicators, assessing actual health needs of community, performing educational programs and interventions to promote healthy lifestyle, and enhancing quality of primary health services.The objective of this project was to determine a defined population which is representative of Tehran, the Capital of Iran. This article reports the methodology and establishment of the research network of Tehran defined population.Methods: This project started by selecting two urban health centers from each of the five district health centers affiliated to Shahid Beheshti University of Medical Sciences in 2012. Inside each selected urban health center, one defined population research station was established. Two new centers have been added during 2013 and 2014. For the time being, the number of the covered population of the network has reached 40000 individuals. The most important criterion for the defined population has been to be representative of the population of Tehran. For this, we selected two urban health centers from 12 of 22 municipality districts and from each of the five different socioeconomic of Greater Tehran. Merely 80000 individuals in neighborhoods of each defined population research station were considered as control group of the project.Findings: Totally we selected 12 defined population research stations and their under-covered population developed a defined population which is representative of Tehran population.Conclusion: a population lab is ready now in metropolitan of Tehran.

Linear vestibuloocular reflex during motion along axes between nasooccipital and interaural

Science.gov (United States)

Tomko, David L.; Paige, Gary D.

1992-01-01

Linear vestibuloocular reflexes (LVORs), which stabilize retinal images by producing eye movements to compensate for linear head motion, are of two types: (1) responses to head tilt, which work primarily at low frequencies; and (2) responses to head translation, which act at higher frequencies. This work tested the hypothesis that reflexive eye movements would follow the same kinematics relative to the motion axis regardless of head orientation relative to linear motion. The experiments consisted of recording horizontal and vertical eye movements in squirrel monkeys during linear oscillations at 5 Hz along the head's nasooccipital (NO) axis and along axes lying within +/- 30 deg of the NO axis. It was found that LVORs followed the same kinematics regardless of the eye position in the head or the head orientation relative to motion.

Development of free surface flow between concentric cylinders with vertical axes

International Nuclear Information System (INIS)

Watanabe, T; Toya, Y; Nakamura, I

2005-01-01

Numerical and experimental studies are conducted on flows developing between two concentric cylinders with vertical axes. The inner cylinder rotates and the outer and the lower end wall are fixed. The upper boundary is a free surface. The flow is at rest in an initial state, and the inner cylinder impulsively begins to rotate or its rotation speed linearly increases to a prescribed value. The acceleration rate of the inner cylinder changes the formation processes of flows and/or the final flow modes. Time-dependent flows appear at higher Reynolds numbers, and the numerical and experimental results of the power spectra show some agreements. It is suggested that critical Reynolds numbers appear, at which the fluctuations in the displacement of the free surface and the kinetic energy of a velocity component steeply increase

General Lp-harmonic Blaschke bodies

Indian Academy of Sciences (India)

Lutwak introduced the harmonic Blaschke combination and the harmonic Blaschke body of a star body. Further, Feng and Wang introduced the concept of the -harmonic Blaschke body of a star body. In this paper, we define the notion of general -harmonic Blaschke bodies and establish some of its properties.

Hydrologically induced orientation variations of a tri-axial Earth's principal axes based on satellite-gravimetric and hydrological models

Directory of Open Access Journals (Sweden)

Shen Wenbin

2013-05-01

Full Text Available The Earth is a tri-axial body, with unequal principal inertia moments, A, B and C. The corresponding principal axes a, b and c are determined by the mass distribution of the Earth, and their orientations vary with the mass redistribution. In this study, the hydrologically induced variations are estimated on the basis of satellite gravimetric data, including those from satellite laser ranging (SLR and gravity recovery and climate experiment (GRACE, and hydrological models from global land data assimilation system (GLDAS. The longitude variations of a and b are mainly related to the variations of the spherical harmonic coefficients C¯22 and S¯22, which have been estimated to be consisting annual variations of about 1. 6 arc seconds and 1. 8 arc seconds, respectively, from gravity data. This result is confirmed by land surface water storage provided by the GLDAS model. If the atmospheric and oceanic signals are removed from the spherical harmonic coefficients C¯21 and S¯21, the agreement of the orientation series for c becomes poor, possibly due to the inaccurate background models used in pre-processing of the satellite gravimetric data. Determination of the orientation variations may provide a better understanding of various phenomena in the study of the rotation of a tri-axial Earth.

Wisdom for Building the Project Manager/Project Sponsor Relationship: Partnership for Project Success

National Research Council Canada - National Science Library

Patton, Nanette; Shechet, Allan

2007-01-01

.... This article discusses conventional roles and responsibilities of the project sponsor and then discusses strategies a project manager can employ to define boundaries to reduce role confusion and promote partnership to facilitate project success.

Optimal cut-off levels to define obesity: body mass index and waist circumference, and their relationship to cardiovascular disease, dyslipidaemia, hypertension and diabetes in Malaysia.

Science.gov (United States)

Zaher, Zaki Morad Mohd; Zambari, Robayaah; Pheng, Chan Siew; Muruga, Vadivale; Ng, Bernard; Appannah, Geeta; Onn, Lim Teck

2009-01-01

Many studies in Asia have demonstrated that Asian populations may require lower cut-off levels for body mass index (BMI) and waist circumference to define obesity and abdominal obesity respectively, compared to western populations. Optimal cut-off levels for body mass index and waist circumference were determined to assess the relationship between the two anthropometric- and cardiovascular indices. Receiver operating characteristics analysis was used to determine the optimal cut-off levels. The study sample included 1833 subjects (mean age of 44+/-14 years) from 93 primary care clinics in Malaysia. Eight hundred and seventy two of the subjects were men and 960 were women. The optimal body mass index cut-off values predicting dyslipidaemia, hypertension, diabetes mellitus, or at least one cardiovascular risk factor varied from 23.5 to 25.5 kg/m2 in men and 24.9 to 27.4 kg/m2 in women. As for waist circumference, the optimal cut-off values varied from 83 to 92 cm in men and from 83 to 88 cm in women. The optimal cut-off values from our study showed that body mass index of 23.5 kg/m2 in men and 24.9 kg/m2 in women and waist circumference of 83 cm in men and women may be more suitable for defining the criteria for overweight or obesity among adults in Malaysia. Waist circumference may be a better indicator for the prediction of obesity-related cardiovascular risk factors in men and women compared to BMI. Further investigation using a bigger sample size in Asia needs to be done to confirm our findings.

Mushroom body efferent neurons responsible for aversive olfactory memory retrieval in Drosophila.

Science.gov (United States)

Séjourné, Julien; Plaçais, Pierre-Yves; Aso, Yoshinori; Siwanowicz, Igor; Trannoy, Séverine; Thoma, Vladimiros; Tedjakumala, Stevanus R; Rubin, Gerald M; Tchénio, Paul; Ito, Kei; Isabel, Guillaume; Tanimoto, Hiromu; Preat, Thomas

2011-06-19

Aversive olfactory memory is formed in the mushroom bodies in Drosophila melanogaster. Memory retrieval requires mushroom body output, but the manner in which a memory trace in the mushroom body drives conditioned avoidance of a learned odor remains unknown. To identify neurons that are involved in olfactory memory retrieval, we performed an anatomical and functional screen of defined sets of mushroom body output neurons. We found that MB-V2 neurons were essential for retrieval of both short- and long-lasting memory, but not for memory formation or memory consolidation. MB-V2 neurons are cholinergic efferent neurons that project from the mushroom body vertical lobes to the middle superiormedial protocerebrum and the lateral horn. Notably, the odor response of MB-V2 neurons was modified after conditioning. As the lateral horn has been implicated in innate responses to repellent odorants, we propose that MB-V2 neurons recruit the olfactory pathway involved in innate odor avoidance during memory retrieval.

Measures of excess body weight and anthropometry among adult Albertans: cross-sectional results from Alberta’s tomorrow project cohort

OpenAIRE

Brenner, Darren R.; Poirier, Abbey E.; Haig, Tiffany R.; Akawung, Alianu; Friedenreich, Christine M.; Robson, Paula J.

2017-01-01

Background Excess body weight during adulthood has been consistently associated with all-cause mortality, cardiovascular disease, and cancer at multiple sites among other chronic diseases. We describe the prevalence of excess body weight and abdominal obesity reported by participants enrolled in Alberta’s Tomorrow Project (ATP). Methods ATP is a geographically-based cohort study conducted among adults aged 35–69 years from across the province of Alberta. Participants completed anthropometric ...

Identification of coordination factors affecting building projects performance

Directory of Open Access Journals (Sweden)

Wesam Salah Alaloul

2016-09-01

Full Text Available Construction projects performance requires improvement to fulfil the complexity of the stakeholders’ needs and expectations. Coordination process is proposed as an efficient solution for weak performance of construction projects. Therefore, coordination factors are vital in ensuring a successful implementation of all project phases. This study aimed to identify and prioritise coordination factors that influence the performance of building projects in Malaysian context. A vast body of literature on coordination process was reviewed and resulted in 53 coordination factor. Three rounds of Delphi technique were conducted. The most effective coordination factors were ranked based on the Relative Importance Index (RII such as Scheduling (RII = 0.97, Quality assurance plan (RII = 0.93, and all parties’ participation in plans (RII = 0.89. These coordination factors have fulfilled the research gap and provided better management and higher performance for project parties. The results offer insightful perspectives to define the most effective coordination factors, for addressing the dependency between project tasks and the parties to enhance project performance.

Collateral Projections Innervate the Mammillary Bodies and Retrosplenial Cortex: A New Category of Hippocampal Cells

Science.gov (United States)

O’Mara, Shane M.

2018-01-01

To understand the hippocampus, it is necessary to understand the subiculum. Unlike other hippocampal subfields, the subiculum projects to almost all distal hippocampal targets, highlighting its critical importance for external networks. The present studies, in male rats and mice, reveal a new category of dorsal subiculum neurons that innervate both the mammillary bodies (MBs) and the retrosplenial cortex (RSP). These bifurcating neurons comprise almost half of the hippocampal cells that project to RSP. The termination of these numerous collateral projections was visualized within the medial mammillary nucleus and the granular RSP (area 29). These collateral projections included subiculum efferents that cross to the contralateral MBs. Within the granular RSP, the collateral projections form a particularly dense plexus in deep Layer II and Layer III. This retrosplenial termination site colocalized with markers for VGluT2 and neurotensin. While efferents from the hippocampal CA fields standardly collateralize, subiculum projections often have only one target site. Consequently, the many collateral projections involving the RSP and the MBs present a relatively unusual pattern for the subiculum, which presumably relates to how both targets have complementary roles in spatial processing. Furthermore, along with the anterior thalamic nuclei, the MBs and RSP are key members of a memory circuit, which is usually described as both starting and finishing in the hippocampus. The present findings reveal how the hippocampus simultaneously engages different parts of this circuit, so forcing an important revision of this network. PMID:29527569

Investigations of the structure and electromagnetic interactions of few-body systems

International Nuclear Information System (INIS)

Lehman, D.R.; Haberzettl, H.; Maximon, L.C.; Parke, W.C.

1992-07-01

In order to make it easy for the reader to see the specific research carried out and the progress made, the following report of progress is done by topic. Each item has a format layout of Topic, Investigators, Objective, Significance, and Description of Progress, followed at the end by the relevant references. As is clear from the topics listed, the emphasis of the George Washington University (GWU) theory group has been on the structure and electromagnetic interactions of few-body nuclei. Both low- and intermediate-energy electromagnetic disintegration of these nuclei is considered. When the excitation energy of the target nucleus is low, the aim has been to handle the continuum part of the theoretical work numerically with no approximations, that is, by means of full three- or four-body dynamics. When structure questions axe the issue, numerically accurate calculations axe always carried through, limited only by the underlying two-body or three-body interactions used as input. Implicit in our work is the question of how far one can go within the traditional nuclear physics framework, i.e., nucleons and mesons in a nonrelativistic setting. Our central goal is to carry through state-of-the-art fewbody calculations that wig serve as a means of determining at what point standard nuclear physics requires quark degrees of freedom in order to understand the phenomena in question. So far, in the problems considered, there has been no evidence of the necessity to go beyond the traditional approach, though we always keep in mind that possibility. As our work is involved with questions in the intermediate-energy realm, moving from a nonrelativistic framework to a relativistic one is always a consideration. Currently, for the problems that have been pursued in this domain of energy, the issues concern far more the mechanisms of the reactions and structural questions than the need to move to relativistic dynamics

General Lp-harmonic Blaschke bodies

Indian Academy of Sciences (India)

Abstract. Lutwak introduced the harmonic Blaschke combination and the harmonic. Blaschke body of a star body. Further, Feng and Wang introduced the concept of the L p- harmonic Blaschke body of a star body. In this paper, we define the notion of general. L p-harmonic Blaschke bodies and establish some of its ...

Ace Project as a Project Management Tool

Science.gov (United States)

Cline, Melinda; Guynes, Carl S.; Simard, Karine

2010-01-01

The primary challenge of project management is to achieve the project goals and objectives while adhering to project constraints--usually scope, quality, time and budget. The secondary challenge is to optimize the allocation and integration of resources necessary to meet pre-defined objectives. Project management software provides an active…

Measurement of whole-body human centers of gravity and moments of inertia.

Science.gov (United States)

Albery, C B; Schultz, R B; Bjorn, V S

1998-06-01

With the inclusion of women in combat aircraft, the question of safe ejection seat operation has been raised. The potential expanded population of combat pilots would include both smaller and larger ejection seat occupants, which could significantly affect seat performance. The method developed to measure human whole-body CG and MOI used a scale, a knife edge balance, and an inverted torsional pendulum. Subjects' moments of inertia were measured along six different axes. The inertia tensor was calculated from these values, and principal moments of inertia were then derived. Thirty-eight antropometric measurements were also taken for each subject to provide a means for direct correlation of inertial properties to body dimensions and for modeling purposes. Data collected in this study has been used to validate whole-body mass properties predictions. In addition, data will be used to improve Air Force and Navy ejection seat trajectory models for the expanded population.

Ear-to-Ear On-Body Channel Model for Hearing Aid Applications

DEFF Research Database (Denmark)

Kvist, Søren Helstrup; Thaysen, Jesper; Jakobsen, Kaj Bjarne

2015-01-01

that the head is mod- eled more accurately, and the radiation pattern is sampled in more points. The model is able to take the on-body radiation pattern of the antenna, as well as arbitrary he ad contours into account. The model is validated by the use of measurements and Ansys HFSS simulations on the specific......The deterministic ear-to-ear on-body channel is modeled by the use of a number of elliptically shaped paths. The semi-major axes of the elliptica lly shaped paths are adjusted such that they trace the outline of the head. The path gain converges when the number of paths is increased, su ch...... anthropomorphic mannequin (SAM) head. The model is used with a g enetic algorithm in order to synthesize a radiation pattern that is optimal for use with the ear-to-ear on-body channel. The radiation pattern is synthesized in terms of the spherical wave expansion coefficients of the hypothetical small antenna...

Body position and motor imagery strategy effects on imagining gait in healthy adults: Results from a cross-sectional study.

Science.gov (United States)

Beauchet, Olivier; Launay, Cyrille P; Sekhon, Harmehr; Gautier, Jennifer; Chabot, Julia; Levinoff, Elise J; Allali, Gilles

2018-01-01

Assessment of changes in higher levels of gait control with aging is important to better understand age-related gait instability, with the perspective to improve the screening of individuals at risk for falls. The comparison between actual Timed Up and Go test (aTUG) and its imagined version (iTUG) is a simple clinical way to assess age-related changes in gait control. The modulations of iTUG performances by body positions and motor imagery (MI) strategies with normal aging have not been evaluated yet. This study aims 1) to compare the aTUG time with the iTUG time under different body positions (i.e., sitting, standing or supine) in healthy young and middle age, and older adults, and 2) to examine the associations of body positions and MI strategies (i.e., egocentric versus allocentric) with the time needed to complete the iTUG and the delta TUG time (i.e., relative difference between aTUG and iTUG) while taking into consideration clinical characteristics of participants. A total of 60 healthy individuals (30 young and middle age participants 26.6±7.4 years, and 30 old participants 75.0±4.4 years) were recruited in this cross-sectional study. The iTUG was performed while sitting, standing and in supine position. Times of the aTUG, the iTUG under the three body positions, the TUG delta time and the strategies of MI (i.e., ego representation, defined as representation of the location of objects in space relative to the body axes of the self, versus allocentric representation defined as encoding information about body movement with respect to other object, the location of body being defined relative to the location of other objects) were used as outcomes. Age, sex, height, weight, number of drugs taken daily, level of physical activity and prevalence of closed eyes while performing iTUG were recorded. The aTUG time is significantly greater than iTUG while sitting and standing (Pposition. The multiple linear regressions confirm that the supine position is associated

Topoare medievale identifi cate în judeţul Galaţi / Mediaeval axes discovered in the Galaţi County

Directory of Open Access Journals (Sweden)

Costin Croitoru

2016-10-01

Full Text Available Random discoveries have allowed us to discover some very interesting artifacts – four iron axes, relating to the period of the Middle Ages. None of them has archaeological context; they were found in the collections of two school museums from the villages in the county of Galaţi, where we carried out archaeological research: Tuluceşti (A and Valea Mărului (B. These items are not rarities (such artifacts are known in Romania, as well as in Europe, but to date it is the only finds of this kind in southern Moldova. In addition, the presence of the original ornamentation on two axes, which has no analogies in the literature available to us, prompted us to present them in this publication, although some of these items have already been published.

Project Success in Agile Development Software Projects

Science.gov (United States)

Farlik, John T.

2016-01-01

Project success has multiple definitions in the scholarly literature. Research has shown that some scholars and practitioners define project success as the completion of a project within schedule and within budget. Others consider a successful project as one in which the customer is satisfied with the product. This quantitative study was conducted…

Project Success in IT Project Management

OpenAIRE

Siddiqui, Farhan Ahmed

2010-01-01

The rate of failed and challenged Information Technology (IT) projects is too high according to the CHAOS Studies by the Standish Group and the literature on project management (Standish Group, 2008). The CHAOS Studies define project success as meeting the triple constraints of scope, time, and cost. The criteria for project success need to be agreed by all parties before the start of the project and constantly reviewed as the project progresses. Assessing critical success factors is another ...

Quasicharacteristic radiation of relativistic electrons at orientation motion in lithium halides crystals along charged planes and axes

Science.gov (United States)

Maksyuta, N. V.; Vysotskii, V. I.; Efimenko, S. V.

2016-07-01

The paper deals with the investigation of the orientation motion of relativistic electrons in charged (111) planes and charged [110] axes of lithium halides ionic crystals of LiF, LiCl, LiBr and LiI. On the basis of these investigations the spectra of quasicharacteristic radiation for the electron beams with various Lorentz-factors both in planar and axial cases have been calculated numerically.

Project Decision Chain

DEFF Research Database (Denmark)

Rolstadås, Asbjørn; Pinto, Jeffrey K.; Falster, Peter

2015-01-01

To add value to project performance and help obtain project success, a new framework for decision making in projects is defined. It introduces the project decision chain inspired by the supply chain thinking in the manufacturing sector and uses three types of decisions: authorization, selection......, and plan decision. A primitive decision element is defined where all the three decision types can be accommodated. Each task in the primitive element can in itself contain subtasks that in turn will comprise new primitive elements. The primitive elements are nested together in a project decision chain....

Hall effects on unsteady MHD flow between two rotating disks with non-coincident parallel axes

Energy Technology Data Exchange (ETDEWEB)

Barik, R.N., E-mail: barik.rabinarayan@rediffmail.com [Department of Mathematics, Trident Academy of Technology, Bhubaneswar (India); Dash, G.C., E-mail: gcdash@indiatimes.com [Department of Mathematics, S.O.A. University, Bhubaneswar (India); Rath, P.K., E-mail: pkrath_1967@yahoo.in [Department of Mathematics, B.R.M. International Institute of Technology, Bhubaneswar (India)

2013-01-15

Hall effects on the unsteady MHD rotating flow of a viscous incompressible electrically conducting fluid between two rotating disks with non-coincident parallel axes have been studied. There exists an axisymmetric solution to this problem. The governing equations are solved by applying Laplace transform method. It is found that the torque experienced by the disks decreases with an increase in either the Hall parameter, m or the rotation parameter, S{sup 2}. Further, the axis of rotation has no effect on the fluid flow. (author)

Hall effects on unsteady MHD flow between two rotating disks with non-coincident parallel axes

International Nuclear Information System (INIS)

Barik, R.N.; Dash, G.C.; Rath, P.K.

2013-01-01

Hall effects on the unsteady MHD rotating flow of a viscous incompressible electrically conducting fluid between two rotating disks with non-coincident parallel axes have been studied. There exists an axisymmetric solution to this problem. The governing equations are solved by applying Laplace transform method. It is found that the torque experienced by the disks decreases with an increase in either the Hall parameter, m or the rotation parameter, S 2 . Further, the axis of rotation has no effect on the fluid flow. (author)

Generalized two axes model of a squirrel-cage induction motor for rotor fault diagnosis

Directory of Open Access Journals (Sweden)

Samir Hamdani

2008-01-01

Full Text Available A generalized two axes model of a squirrel-cage induction motor is developed This model is based on a winding function approach and the coupled magnetic circuit theory and takes into account the stator and the rotor asymmetries due to faults. This paper presents a computer simulation and experimental dynamic characteristics for a healthy induction machine, machine with one broken bar and a machine with two broken bars. The results illustrate good agreement between both simulated and experimental results. Also, the power spectral density PSD was performed to obtain a stator current spectrum.

SU-F-I-11: Software Development for 4D-CBCT Research of Real-Time-Image Gated Spot Scanning Proton Therapy

Energy Technology Data Exchange (ETDEWEB)

Fujii, T; Fujii, Y; Shimizu, S; Shirato, H [Graduate School of Medicine, Hokkaido University, Sapporo, Hokkaido (Japan); Matsuura, T; Umegaki, K [Faculty of Engineering, Hokkaido University, Sapporo, Hokkaido (Japan); Takao, S; Miyamoto, N; Matsuzaki, Y [Proton Beam Therapy Center, Hokkaido University Hospital, Sapporo, Hokkaido (Japan)

2016-06-15

Purpose: To acquire correct information for inside the body in patient positioning of Real-time-image Gated spot scanning Proton Therapy (RGPT), utilization of tomographic image at exhale phase of patient respiration obtained from 4-dimensional Cone beam CT (4D-CBCT) has been desired. We developed software named “Image Analysis Platform” for 4D-CBCT researches which has technique to segment projection-images based on 3D marker position in the body. The 3D marker position can be obtained by using two axes CBCT system at Hokkaido University Hospital Proton Therapy Center. Performance verification of the software was implemented. Methods: The software calculates 3D marker position retrospectively by using matching positions on pair projection-images obtained by two axes fluoroscopy mode of CBCT system. Log data of 3D marker tracking are outputted after the tracking. By linking the Log data and gantry-angle file of projection-image, all projection-images are equally segmented to spatial five-phases according to marker 3D position of SI direction and saved to specified phase folder. Segmented projection-images are used for CBCT reconstruction of each phase. As performance verification of the software, test of segmented projection-images was implemented for sample CT phantom (Catphan) image acquired by two axes fluoroscopy mode of CBCT. Dummy marker was added on the images. Motion of the marker was modeled to move in 3D space. Motion type of marker is sin4 wave function has amplitude 10.0 mm/5.0 mm/0 mm, cycle 4 s/4 s/0 s for SI/AP/RL direction. Results: The marker was tracked within 0.58 mm accuracy in 3D for all images, and it was confirmed that all projection-images were segmented and saved to each phase folder correctly. Conclusion: We developed software for 4D-CBCT research which can segment projection-image based on 3D marker position. It will be helpful to create high quality of 4D-CBCT reconstruction image for RGPT.

Scaffolding Project-Based Learning with the Project Management Body of Knowledge (PMBOK[R])

Science.gov (United States)

van Rooij, Shahron Williams

2009-01-01

This paper reports the results of a study of the extent to which processes and procedures from the discipline of project management can scaffold online project-based learning in a graduate-level instructional technology course, by facilitating intra-team interaction, enhancing project outcomes and promoting a positive project team experience. With…

Defining project scenarios for the agile requirements engineering product-line development questionnaire

OpenAIRE

Feng, Kunwu; Lempert, Meli; Tang, Yan; Tian, Kun; Cooper, Kendra M.L.; Franch Gutiérrez, Javier

2007-01-01

Current agile methods are focused on practices of small, rapid developing and iteration, more people oriented, less documentation projects, and the use of the methods in large, product line projects are somehow difficult. UTD and GESSI have started a project to develop an expert system that can assist a requirements enginer in selecting a requirements engineering process that is well suited for their project, in particular with respect to the use of agile and product line engineering methods....

Defining the landscape of adaptive genetic diversity.

Science.gov (United States)

Eckert, Andrew J; Dyer, Rodney J

2012-06-01

Whether they are used to describe fitness, genome architecture or the spatial distribution of environmental variables, the concept of a landscape has figured prominently in our collective reasoning. The tradition of landscapes in evolutionary biology is one of fitness mapped onto axes defined by phenotypes or molecular sequence states. The characteristics of these landscapes depend on natural selection, which is structured across both genomic and environmental landscapes, and thus, the bridge among differing uses of the landscape concept (i.e. metaphorically or literally) is that of an adaptive phenotype and its distribution across geographical landscapes in relation to selective pressures. One of the ultimate goals of evolutionary biology should thus be to construct fitness landscapes in geographical space. Natural plant populations are ideal systems with which to explore the feasibility of attaining this goal, because much is known about the quantitative genetic architecture of complex traits for many different plant species. What is less known are the molecular components of this architecture. In this issue of Molecular Ecology, Parchman et al. (2012) pioneer one of the first truly genome-wide association studies in a tree that moves us closer to this form of mechanistic understanding for an adaptive phenotype in natural populations of lodgepole pine (Pinus contorta Dougl. ex Loud.). © 2012 Blackwell Publishing Ltd.

Adaptation of Agile Project Management Methodology for Project Team

Directory of Open Access Journals (Sweden)

Rasnacis Arturs

2015-12-01

Full Text Available A project management methodology that defines basic processes, tools, techniques, methods, resources and procedures used to manage a project is necessary for effective and successful IT project management. Each company needs to define its own methodology or adapt some of the existing ones. The purpose of the research is to evaluate the possibilities of adapting IT project development methodology according to the company, company employee characteristics and their mutual relations. The adaptation process will be illustrated with a case study at an IT company in Latvia where the developed methodology is based on Agile Scrum, one of the most widespread Agile methods.

The challenge of defining risk-based metrics to improve food safety: inputs from the BASELINE project.

Science.gov (United States)

Manfreda, Gerardo; De Cesare, Alessandra

2014-08-01

In 2002, the Regulation (EC) 178 of the European Parliament and of the Council states that, in order to achieve the general objective of a high level of protection of human health and life, food law shall be based on risk analysis. However, the Commission Regulation No 2073/2005 on microbiological criteria for foodstuffs requires that food business operators ensure that foodstuffs comply with the relevant microbiological criteria. Such criteria define the acceptability of a product, a batch of foodstuffs or a process, based on the absence, presence or number of micro-organisms, and/or on the quantity of their toxins/metabolites, per unit(s) of mass, volume, area or batch. The same Regulation describes a food safety criterion as a mean to define the acceptability of a product or a batch of foodstuff applicable to products placed on the market; moreover, it states a process hygiene criterion as a mean indicating the acceptable functioning of the production process. Both food safety criteria and process hygiene criteria are not based on risk analysis. On the contrary, the metrics formulated by the Codex Alimentarius Commission in 2004, named Food Safety Objective (FSO) and Performance Objective (PO), are risk-based and fit the indications of Regulation 178/2002. The main aims of this review are to illustrate the key differences between microbiological criteria and the risk-based metrics defined by the Codex Alimentarius Commission and to explore the opportunity and also the possibility to implement future European Regulations including PO and FSO as supporting parameters to microbiological criteria. This review clarifies also the implications of defining an appropriate level of human protection, how to establish FSO and PO and how to implement them in practice linked to each other through quantitative risk assessment models. The contents of this review should clarify the context for application of the results collected during the EU funded project named BASELINE (www

Longitudinal, lateral and transverse axes of forearm muscles influence the crosstalk in the mechanomyographic signals during isometric wrist postures.

Science.gov (United States)

Islam, Md Anamul; Sundaraj, Kenneth; Ahmad, R Badlishah; Sundaraj, Sebastian; Ahamed, Nizam Uddin; Ali, Md Asraf

2014-01-01

In mechanomyography (MMG), crosstalk refers to the contamination of the signal from the muscle of interest by the signal from another muscle or muscle group that is in close proximity. The aim of the present study was two-fold: i) to quantify the level of crosstalk in the mechanomyographic (MMG) signals from the longitudinal (Lo), lateral (La) and transverse (Tr) axes of the extensor digitorum (ED), extensor carpi ulnaris (ECU) and flexor carpi ulnaris (FCU) muscles during isometric wrist flexion (WF) and extension (WE), radial (RD) and ulnar (UD) deviations; and ii) to analyze whether the three-directional MMG signals influence the level of crosstalk between the muscle groups during these wrist postures. Twenty, healthy right-handed men (mean ± SD: age = 26.7±3.83 y; height = 174.47±6.3 cm; mass = 72.79±14.36 kg) participated in this study. During each wrist posture, the MMG signals propagated through the axes of the muscles were detected using three separate tri-axial accelerometers. The x-axis, y-axis, and z-axis of the sensor were placed in the Lo, La, and Tr directions with respect to muscle fibers. The peak cross-correlations were used to quantify the proportion of crosstalk between the different muscle groups. The average level of crosstalk in the MMG signals generated by the muscle groups ranged from: 34.28-69.69% for the Lo axis, 27.32-52.55% for the La axis and 11.38-25.55% for the Tr axis for all participants and their wrist postures. The Tr axes between the muscle groups showed significantly smaller crosstalk values for all wrist postures [F (2, 38) = 14-63, pmovement research, especially for the examination of muscle mechanics during various types of the wrist postures.

Cultivo in vitro de eixos embrionários de paricá In vitro culture of paricá embryonic axes

Directory of Open Access Journals (Sweden)

Iulla Naiff Rabelo de Souza Reis

2009-02-01

Full Text Available Objetivou-se, neste trabalho, avaliar a influência do meio de cultura MS normal e com as concentrações dos sais reduzidas à metade (½ MS, a presença de ácido giberélico (AG3 e de ácido cítrico em eixos embrionários de paricá cultivados in vitro. Os eixos embrionários foram extraídos das sementes e inoculados em meio de cultura básico MS e ½ MS, suplementados ou não com ácido cítrico (1 g.L-1 e com AG3 (3 mg.L-1, constituindo 6 tratamentos e 7 repetições. Os eixos embrionários de paricá podem ser cultivados em meio MS com metade das concentrações dos sais, não sendo necessária a adição de ácido cítrico, e a presença de 3 mg.L-1 de AG3 afetou o desenvolvimento das plântulas de paricá.The aim of this study was to evaluate the influence of normal MS culture medium and at half strength of its salts (½ MS, the presence of gibberellic acid (GA3 and citric acid on the in vitro culture of paricá embryonic axes. The embryonic axes were extracted from seeds and inoculated on basic MS and ½ MS culture media, supplemented or not with citric acid (1 g.L-1 and GA3 (3 mg.L-1, constituting 6 treatments and 7 replications. The embryonic axes of paricá may be cultivated on MS medium at half strength of its salts, the addition of citric acid not being necessary, and the presence of 3 mg.L-1 GA3 affected the development of paricá seedling.

Considerations on the correlation between real body and body image

OpenAIRE

Beatrice ABALAȘEI; Florin TROFIN

2017-01-01

very individual in the society has a representation of it’s own body in relation to the spatial cues, postural cues, time cues, etc., considered by specialists the body scheme. Throughout its development, the human being goes through different stages of organization of both the image the and body scheme. We start carrying out this study from the idea that there could be, in male individuals, a link between body representation (own image projected outwardly apparent by reference to an image pr...

An Asymmetrical Trade: Trade in the Exotic and Our Understanding of Axes and Early Neolithic Exchange

OpenAIRE

Tom Clare

2009-01-01

This article explores the idea that the movement of axes away from their source of procurement, such as those of Group VI, reflects in part an invisible trade in perishable goods. In particular, it hypothesises that the pattern of movement was stimulated in the early Neolithic by the dispersal of those exotic goods required to establish farming. The evidence for and the implications of this are explored, and it is suggested that in order to facilitate understanding of both the 'trade' in ston...

A parabolic solar cooker with automatic two axes sun tracking system

Energy Technology Data Exchange (ETDEWEB)

Al-Soud, Mohammed S.; Akayleh, Ali; Hrayshat, Eyad S. [Electrical Engineering Department, Faculty of Engineering, Tafila Technical University, P.O. Box 66, Tafila 66110 (Jordan); Abdallah, Essam [Mechanical Engineering Department, FET, AL-Balqa Applied University, Amman (Jordan); Abdallah, Salah [Mechanical and Industrial Engineering Department, Applied Science University (Jordan)

2010-02-15

A parabolic solar cooker with automatic two axes sun tracking system was designed, constructed, operated and tested to overcome the need for frequent tracking and standing in the sun, facing all concentrating solar cookers with manual tracking, and a programmable logic controller was used to control the motion of the solar cooker. The results of the continuous test - performed for three days from 8:30 h to 16:30 h in the year 2008 - showed that the water temperature inside the cooker's tube reached 90 C in typical summer days, when the maximum registered ambient temperature was 36 C. It was also noticed that the water temperature increases when the ambient temperature gets higher or when the solar intensity is abundant. This is in favor of utilizing this cooker in many developing countries, which are characterized by high solar insulations and high temperatures. Besides cooking, the proposed cooker could be utilized for warming food, drinks as well as to pasteurize water or milk. (author)

INDIVIDUALITY OF CENTRE OF BODY MOVEMENT AT WALK AND TROT WITHIN THE HAFLINGER BREED

Directory of Open Access Journals (Sweden)

Rebeka R. Zsoldos

2015-09-01

Full Text Available Kinematic measurements of fourteen Haflinger horses without lameness, walking and trotting on a treadmill were taken to document the location of the centre of the body (CB, defined as the centre between markers on the head, on the withers, on the sacral bone and on the lateral wall of all four hooves in relation to the sacral bone marker. During walk and trot, there are three dimensional CB position (x: forward-backward, y: side-to-side, and z: up and down. For each horse minimum of eight motion cycles were considered in walk as well as in trot. For all three axes, mean CB location, its standard deviation and its 95% confidence interval (CI were calculated. For statistical analysis, Shapiro-Wilk test and Spearman’s correlation test were carried out. Mean body mass was 463±42 kg, CI (439, 487; mean height at the withers was 131±5 cm, CI (128, 134; mean height at the sacrum was 128 ± 2 cm, CI (127, 130. Mean CBx was in front of the sacrum (walk 74±2 cm, CI (72, 75; trot 73±2 cm, CI (72, 74; walk vs trot p=0.008. Mean CBz was below the sacrum (-71±2 cm, CI (-73, -70 in walk; -69 ± 2 cm, CI (-70, -68 in trot; walk vs trot p=0.001. Positive correlations were found between MeanCBx and trunk length in walk and trot, which could highlight the biomechanical importance of the trunk as it plays a crucial role in deceleration and acceleration. The analysis of the body location centre may be used to identify differences between horses of the same breed, and thus support evaluation of the quality of the horse during locomotion.

Whole body detectors for clinical applications

International Nuclear Information System (INIS)

Silar, J.

The requirements are presented on the parameters of whole-body detectors suitable for clinical retention assays and the detector-patient configuration described. A whole-body detector was developed with an axial configuration of two pairs of large-volume scintillation detectors with NaI(Tl) crystals. One pair is placed under the bed, the other above the bed on which the patient is being examined. The axes of the crystals are located at a distance of 90 cm apart. The field of vision of the detector is described for the application of a 137 Cs source in the air and in a 24 cm layer of water. The positive characteristics of the detector are listed as being homogeneous sensitivity, energy resolution, long-term stability of signal pulse amplitude and average pulse rate in the integral mode. The results obtained show that the detector may be used to evaluate the level of contamination of persons by gamma emitters within the region of approximately 800 Bq to 74 MBq. The error in converting the number of signal pulses in the integral mode does not exceed 50% for gamma emitters with a photon energy above 30O keV. (J.B.)

Inhibitory effects of central neuropeptide Y on the somatotropic and gonadotropic axes in male rats are independent of adrenal hormones.

Science.gov (United States)

Sainsbury, A; Herzog, H

2001-03-01

Neuropeptide Y (NPY) in the hypothalamus exerts multiple physiological functions including stimulation of adipogenic pathways such as feeding and insulin secretion as well as inhibition of the somatotropic and gonadotropic axes. Since hypothalamic NPY-ergic activity is increased by negative energy balance, NPY enables coordinated regulation of growth and reproduction in parallel with energy availability. Chronic pathological increases in central NPY-ergic activity contribute to obesity. Many of the adipogenic effects of NPY are specifically dependent on adrenal glucocorticoids. However, in the current study we show that central NPY does not require adrenal hormones to inhibit the somatotropic and gonadotropic axes in rats. Male adrenalectomized and sham-operated normal rats were intracerebroventricularly (ICV) infused with NPY (15 microg/day) or saline for 5-7 days, and plasma leptin, insulin-like growth factor (IGF-1) and testosterone were assayed, and epididymal white adipose tissue (WATe) was weighed. In normal intact rats, WATe weight and leptinemia were significantly increased by NPY, and these effects were prevented by adrenalectomy. In normal rats, NPY markedly reduced plasma IGF-1 levels (470 +/- 40 versus 1260 +/- 90 ng/ml) and testosterone (0.53 +/- 0.28 versus 5.4 +/- 0.80 nmol/l in saline-infused controls, p < 0.0001). Adrenalectomy decreased plasma IGF-1 concentrations to 290 +/- 30 (p < 0.0001 versus normal rats), which were significantly reduced further by NPY. However, adrenalectomy had no significant effect on basal nor on NPY-induced plasma testosterone concentrations. In conclusion unlike the stimulatory effects of NPY on fat mass and leptinemia, NPY-induced inhibition of the somatotropic and gonadotropic axes in male rats do not require adrenal hormones.

The body complex in contemporary science, literature, and culture

Science.gov (United States)

Smith, Christopher Jason

1998-12-01

In the simplest terms, the purpose of this dissertation, entitled The Body Complex in Contemporary Science, Literature, and Culture is to examine the relationships between popular quantum mechanics, Chaos Theory (or complex dynamics), and contemporary Feminist/Gender theory. As the title is intended to suggest, this examination is narrowed to the 'event' of the body as it appears within the discourses of several different disciplines. The primary question is, 'what is the body and how do we define it?' And more, how do we conceive of 'a body' at all, from the cosmic to the molecular. How do these very different ideas of body reinforce and/or challenge our own concept of self and the experience of our bodies? And, how is this sense of embodiment represented in popular science, literature, and culture? Finally, the conclusion explores the possibility of liberating practices-complex actions-which may help to reveal the structures of power and alter in some useful ways our own sense of embodiment. This project relies most heavily upon the work of Michel Foucault and other gender critics such as Donna J. Harraway and Judith Butler. However, in support of these arguments a geneology of criticism is established which includes the Renaissance view of the body, a discussion of Karl Marx and materialism, Sigmund Freud and the body as the origin of mind, Lacan's linguistic approach to self-perception, and the theories of the French school of Feminism.

Viewer-centered and body-centered frames of reference in direct visuomotor transformations.

Science.gov (United States)

Carrozzo, M; McIntyre, J; Zago, M; Lacquaniti, F

1999-11-01

It has been hypothesized that the end-point position of reaching may be specified in an egocentric frame of reference. In most previous studies, however, reaching was toward a memorized target, rather than an actual target. Thus, the role played by sensorimotor transformation could not be disassociated from the role played by storage in short-term memory. In the present study the direct process of sensorimotor transformation was investigated in reaching toward continuously visible targets that need not be stored in memory. A virtual reality system was used to present visual targets in different three-dimensional (3D) locations in two different tasks, one with visual feedback of the hand and arm position (Seen Hand) and the other without such feedback (Unseen Hand). In the Seen Hand task, the axes of maximum variability and of maximum contraction converge toward the mid-point between the eyes. In the Unseen Hand task only the maximum contraction correlates with the sight-line and the axes of maximum variability are not viewer-centered but rotate anti-clockwise around the body and the effector arm during the move from the right to the left workspace. The bulk of findings from these and previous experiments support the hypothesis of a two-stage process, with a gradual transformation from viewer-centered to body-centered and arm-centered coordinates. Retinal, extra-retinal and arm-related signals appear to be progressively combined in superior and inferior parietal areas, giving rise to egocentric representations of the end-point position of reaching.

The response of the pituitary-adrenal and pituitary-thyroidal axes to the plasma glucose perturbations in Babesia canis rossi babesiosis

Directory of Open Access Journals (Sweden)

J.P. Schoeman

2007-06-01

Full Text Available This prospective, cross-sectional, interventional study was designed to determine the association between the hormones of the pituitary-adrenal and pituitary-thyroid axes and other clinical parameters with the blood glucose perturbations in dogs with naturally occurring Babesia canis rossi babesiosis. Thirty-six dogs with canine babesiosis were studied. Blood samples were obtained from the jugular vein in each dog prior to treatment at admission to hospital and serum endogenous adrenocorticotrophic hormone(ACTH, pre-ACTH cortisol, thyroxine, free thyroxine and TSH concentrations were measured. Immediately thereafter each dog was injected intravenously with 5 µg/kg of ACTH (tetracosactrin. A 2nd blood sample was taken 1 hour later for serumpost-ACTHcortisol measurement. Three patient groups were recruited: hypoglycaemic dogs (glucose 5.5 mmol/ℓ, n = 12. Basal and post-ACTH serum cortisol concentrations were significantly higher in hypoglycaemic dogs, whereas body temperature, serum thyroxine and free thyroxine were significantly lower in hypoglycaemic dogs. Haematocrit was significantly lower in both hypo-and hyperglycaemic dogs compared with normoglycaemic dogs. Low blood glucose concentrations were significantly associated with high basal and post-ACTH cortisol concentrations and with low serum thyroxine and free thyroxine concentrations in dogs suffering from B. canis rossi babesiosis.

Real-time tracking of vertebral body movement with implantable reference microsensors.

Science.gov (United States)

Mularski, Sven; Picht, Thomas; Kuehn, Björn; Kombos, Theodoros; Brock, Mario; Suess, Olaf

2006-05-01

In the spine, navigation techniques serve mainly to control and accurately target insertion of implants. The main source of error is that the spine is not a rigid organ, but rather a chain of semiflexible movement segments. Any intraoperative manipulation of the patient alters the geometry and volumetry as compared to the 3D volume model created from the image data. Thus, the objective of the study was to implement the theoretical principle of microsensor referencing in a model experiment and to clarify which anatomical structures are suitable for intermittent implantation of positional sensors, as illustrated with cervical vertebral bodies. Laboratory tests were conducted using 70 models of human cervical vertebral bodies. The first experiment investigated whether arbitrary movements of vertebral bodies can be tracked with the positional information from the implanted microsensors. The accuracy of this movement monitoring was determined quantitatively on the basis of positional error measurement. In the second experiment, different ventral and dorsal surgical operations were simulated on five models of the cervical spine. Quantifiable measurement values such as the spatial extension of the intervertebral space and the relative positions of the planes of the upper plates were determined. With respect to the differing anatomy of the individual vertebral bodies of the cervical spine, the sensors could be placed securely with a 5x2 mm drill. The registration error (RE) was determined as a root mean square error. The mean value was 0.9425 mm (range: 0.57-1.2 mm; median: 0.9400 mm; SD: 0.1903 mm). The precision of the movement monitoring of the vertebral body was investigated along its three main axes. The error tolerance between post-interventional 3D reconstruction and direct measurement on the model did not exceed 1.3 mm in the distance measurements or 2.5 degrees in the angular measurements. The tomograms on the system monitor could be updated in close to real time

Analytical Model of Doppler Spectra of Light Backscattered from Rotating Convex Bodies of Revolution in the Global Cartesian Coordinate System

International Nuclear Information System (INIS)

Yan-Jun, Gong; Zhen-Sen, Wu; Jia-Ji, Wu

2009-01-01

We present an analytical model of Doppler spectra in backscattering from arbitrary rough convex bodies of revolution rotating around their axes in the global Cartesian coordinate system. This analytical model is applied to analyse Doppler spectra in backscatter from two cones and two cylinders, as well as two ellipsoids of revolution. We numerically analyse the influences of attitude and geometry size of objects on Doppler spectra. The analytical model can give contribution of the surface roughness, attitude and geometry size of convex bodies of revolution to Doppler spectra and may contribute to laser Doppler velocimetry as well as ladar applications

Novel type of neutron polarization analysis using the multianalyzer-equipment of the three-axes spectrometer PUMA

Science.gov (United States)

Schwesig, Steffen; Maity, Avishek; Sobolev, Oleg; Ziegler, Fabian; Eckold, Götz

2018-01-01

The combination of polarization analysis and multianalyzer system available at the three axes spectrometer PUMA@FRM II allows the simultaneous determination of both spin states of the scattered neutrons and the absolute value of the polarization. The present paper describes the technical details along with the basic formalism used for the precise calibration. Moreover, the performance of this method is illustrated by several test experiments including first polarized inelastic studies of the magnetic excitations of CuO in the multiferroic and the uniaxial antiferromagnetic phases.

The Perception is a Prism: body, presence and technologies

Directory of Open Access Journals (Sweden)

Enrico

2014-05-01

Full Text Available Starting from an interdisciplinary perspective of the concepts of body, perception, and technologies in the contemporary scene, this text will attempt to define the general aesthetic notion as bodyscape as an extension of the performer’s perception. Through a survey of some key practices from the contemporary scene such as choreographic compositions by Myriam Gourfink, Isabelle Choinière, and the project of motion signature by Martine Époque and Denis Poulin, the impact of technologies on redefining the process of the performer’s perception in the composition of the movement and the change of the notion of presence will be analysed. In this sense, a series of modifications that influence also the spectator’s perception is presented. Therefore, the notion of empathy is discussed, and an attempt to find out how this applies in the context of a digital image of the body is made.

Mexico City air quality: Progress of an international collaborative project to define air quality management options

International Nuclear Information System (INIS)

Streit, G.E.

1992-01-01

Mexico City, faces a severe air pollution problem due to a combination of circumstances. The city is in a high mountain basin at a subtropical latitude. The basin setting inhibits dispersion of pollution and contributes to frequent wintertime thermal inversions which further trap pollutants near the surface. The elevation and latitude combine to provide plentiful sunshine which, in comparison to more northern latitudes, is enhanced in the UV radiation which drives atmospheric photochemistry to produce secondary pollutants such as ozone. The Area Metropolitana de la Ciudad de Mexico AMCW is defined to include the 16 delegations of the Federal District (D.F.) and 17 highly urbanized municipalities in the State of Mexico which border the D.F. The 1990 census (XI Censo General de Poblacion y Vivienda de 1990) records that slightly over 15 million people live in the AMCM. There are numerous other nearby communities which are in the airshed region of Mexico City, but which are not included in the definition and population of the AMCM. The Mexico City Air Quality Research Initiative is one project that is examining the complex relationship between air pollution, economic growth, societal values, and air quality management policies. The project utilizes a systems approach including computer modeling, comprehensive measurement studies of Mexico City's air pollutants, environmental chemical reaction studies and socioeconomic analysis. Los Alamos National Laboratory (USA) and the Mexican Petroleum Institute are the designated lead institutions

Velocity-dependent changes of rotational axes in the non-visual control of unconstrained 3D arm motions.

Science.gov (United States)

Isableu, B; Rezzoug, N; Mallet, G; Bernardin, D; Gorce, P; Pagano, C C

2009-12-29

We examined the roles of inertial (e(3)), shoulder-centre of mass (SH-CM) and shoulder-elbow articular (SH-EL) rotation axes in the non-visual control of unconstrained 3D arm rotations. Subjects rotated the arm in elbow configurations that yielded either a constant or variable separation between these axes. We hypothesized that increasing the motion frequency and the task complexity would result in the limbs' rotational axis to correspond to e(3) in order to minimize rotational resistances. Results showed two velocity-dependent profiles wherein the rotation axis coincided with the SH-EL axis for S and I velocities and then in the F velocity shifted to either a SH-CM/e(3) trade-off axis for one profile, or to no preferential axis for the other. A third profile was velocity-independent, with the SH-CM/e(3) trade-off axis being adopted. Our results are the first to provide evidence that the rotational axis of a multi-articulated limb may change from a geometrical axis of rotation to a mass or inertia based axis as motion frequency increases. These findings are discussed within the framework of the minimum inertia tensor model (MIT), which shows that rotations about e(3) reduce the amount of joint muscle torque that must be produced by employing the interaction torque to assist movement.

Defining the Effects of Television on the Body Image on the basis of Adolescents’ Opinions

Directory of Open Access Journals (Sweden)

Berrin Dinç

2010-02-01

Full Text Available This study aimed to determine the effects of television on the body images of the adolescents at high school. In the study, mixed method was used. Out of 1222 high school students, who completed the “Scale of Satisfaction from Body Parts and Features”, 36 students participated in the study according to their scores from this scale. Qualitative data of the study was collected through semi-structured interviews and the interview data was analyzed descriptively. The results of the study revealed that the majority of the adolescents were satisfied with their bodies, yet the males reported more satisfaction than the females. Furthermore, it was seen that the adolescents emulated the ideal body types and features on television that they wanted to have or they did not have and they sometimes tried to resemble these. Moreover, it was determined that most of the adolescents compared themselves with the ideal body images on TV and they sometimes experienced disappointment and pessimism

Defining the Effects of Television on the Body Image on the basis of Adolescents’ Opinions

Directory of Open Access Journals (Sweden)

Berrin Dinç

2010-10-01

Full Text Available This study aimed to determine the effects of television on the body images of the adolescents at high school. In the study, mixed method was used. Out of 1222 high school students, who completed the “Scale of Satisfaction from Body Parts and Features”, 36 students participated in the study according to their scores from this scale. Qualitative data of the study was collected through semi-structured interviews and the interview data was analyzed descriptively. The results of the study revealed that the majority of the adolescents were satisfied with their bodies, yet the males reported more satisfaction than the females. Furthermore, it was seen that the adolescents emulated the ideal body types and features on television that they wanted to have or they did not have and they sometimes tried to resemble these. Moreover, it was determined that most of the adolescents compared themselves with the ideal body images on TV and they sometimes experienced disappointment and pessimism.

2.2 micron image of 3C 368 at z = 1.13, a galaxy with aligned radio and stellar axes

International Nuclear Information System (INIS)

Chambers, K.C.; Miley, G.K.; Joyce, R.R.

1988-01-01

A K-band IR image of the z = 1.13 radio galaxy 3C 368, one of the brightest examples of the recently discovered phenomenon of alignment between the optical and radio axes of powerful distant radio galaxies, is presented. The observations show that the IR morphology is also elongated and aligned along the optical and radio axes, but is not coincident with the radio emission. Various mechanisms for producing the IR and optical flux and the resultant constraints on the origin of the alignment effect in high-redshift radio galaxies are discussed. The most likely explanation is that the emission is produced mainly by young stars formed by interaction of the radio source with the ISM. The IR flux is then interpreted as dominated by a population of red supergiants. Independent of the origin of the emission, the observed alignment implies that powerful radio galaxies at high redshifts are distant from giant ellipticals, even in the IR. Hence, attempts to derive a cosmological standard candle using studies which combine these two types of galaxies are likely to be invalid. 32 references

Results of a Survey Software Development Project Management in the U.S. Aerospace Industry. Volume II. Project Management Techniques, Procedures and Tools.

Science.gov (United States)

1979-12-18

I Z I UO W-1 eu 0 - 0 tD CL 0, 0 -I7 NW 2 - x M.j a CL W2 X 41 a ~ 0 0,a 4~~ 0 Z .D .J 0 2. N 0 ~N IU 0 4 - 2 0 ~. 0 Q. ’o ~ 0, 𔃺e U - U ~- 0, 0 -a...0 .44 A A A Ao 0 - 2. -U 2- 4’ A 4’ A o .~ 0 .~ 2. flJ 2. A Ao ~. a 2. 𔃾 2- @2 @2 @2 A 0 .~. a I- 2. Xii - 0 2 @2 ON AXe Re 2- Oi. K A.. A A AU .40...Project manager or person appointed by him SE/ TD project manager b. Senior ADP Manager Director Director computer programming Software program design

Tank waste remediation system privatization Phase 1 infrastructure, project W-519, project execution plan

International Nuclear Information System (INIS)

Parazin, R.J.

1998-01-01

This Project Execution Plan (PEP) defines the overall strategy, objectives, and contractor management requirements for the execution phase of Project W-519 (98-D403), Privatization Phase 1 Infrastructure Support, whose mission is to effect the required Hanford site infrastructure physical changes to accommodate the Privatization Contractor facilities. This plan provides the project scope, project objectives and method of performing the work scope and achieving objectives. The plan establishes the work definitions, the cost goals, schedule constraints and roles and responsibilities for project execution. The plan also defines how the project will be controlled and documented

Local realism versus quantum theory: Violation of the generalized spin-s Bell inequalities for a set of three distinct axes

International Nuclear Information System (INIS)

Ardehali, M.

1990-01-01

Some simple inequalities which demonstrate the incompatibility of local realism with quantum theory are derived. They establish, for the first time, necessary conditions for violation of the generalized spin-s Bell inequalities for a set of three distinct noncoplanar axes. For s=1/2, however, these inequalities are equivalent to Wigner's results, thus giving necessary and sufficient conditions

Elbow helical axes of motion are not the same in physiologic and kinetic joint simulators.

Science.gov (United States)

Muriuki, Muturi G; Mohagheh-Motlagh, Amin; Smolinski, Patrick J; Miller, Mark Carl

2012-08-31

Physiologic and kinetic joint simulators have been widely used for investigations of joint mechanics. The two types of simulator differ in the way joint motion is achieved; through prescribed motions and/or forces in kinetic joint simulators and by tendon loads in physiologic joint simulators. These two testing modalities have produced important insights, as in elucidating the importance of soft tissue structures to joint stability. However, the equivalence of the modalities has not been tested. This study sequentially tested five cadaveric elbows using both a physiologic simulator and a robot/6DOF system. Using position data from markers on the humerus and ulna, we calculated and compared the helical axes of motion of the specimens as the elbows were flexed from full extension. Six step size increments were used in the helical axis calculation. Marker position data at each test's full extension and full flexion point were also used to calculate a datum (overall) helical axis. The angles between the datum axis and step-wise movements were computed and stored. Increasing step size monotonically decreased the variability and the average conical angle encompassing the helical axes; a repeated measures ANOVA using test type (robot or physiologic simulator) and step size found that both type and step caused statistically significant differences (p<0.001). The large changes in helical axis angle observed for small changes in elbow flexion angle, especially in the robot tests, are a caveat for investigators using similar control algorithms. Controllers may need to include increased joint compliance and/or C(1) continuity to reduce variability. Copyright © 2012 Elsevier Ltd. All rights reserved.

Implementing a national early awareness and alert system for new and emerging health technologies in Italy: the COTE Project.

Science.gov (United States)

Migliore, Antonio; Perrini, Maria Rosaria; Jefferson, Tom; Cerbo, Marina

2012-07-01

The aim of this study was to establish a national Early Awareness and Alert (EAA) system for the identification and assessment of new and emerging health technologies in Italy. In 2008, Agenas, a public body supporting Regions and the Ministry of Health (MoH) in health services research, started a project named COTE (Observatory of New and Emerging Health Technologies) with the ultimate aim of implementing a national EAA system. The COTE project involved all stakeholders (MoH, Regions, Industry, Universities, technical government bodies, and Scientific Societies), in defining the key characteristics and methods of the EAA system. Agreement with stakeholders was reached using three separate workshops. During the workshops, participants shared and agreed methods for identification of new and emerging health technologies, prioritization, and assessment. The structure of the Horizon Scanning (HS) reports was discussed and defined. The main channels for dissemination of outputs were identified as the EuroScan database, and the stakeholders' Web portals. During the final workshop, Agenas presented the first three HS reports produced at national level and proposed the establishment of a permanent national EAA system. The COTE Project created the basis for a permanent national EAA system in Italy. An infrastructure to enable the stakeholders network to grow was created, methods to submit new and emerging health technologies for possible evaluation were established, methods for assessment of the technologies selected were defined, and the stakeholders involvement was delineated (in the identification, assessment, and dissemination stages).

Why is intracellular ice lethal? A microscopical study showing evidence of programmed cell death in cryo-exposed embryonic axes of recalcitrant seeds of Acer saccharinum.

Science.gov (United States)

Wesley-Smith, James; Walters, Christina; Pammenter, N W; Berjak, Patricia

2015-05-01

Conservation of the genetic diversity afforded by recalcitrant seeds is achieved by cryopreservation, in which excised embryonic axes (or, where possible, embryos) are treated and stored at temperatures lower than -180 °C using liquid nitrogen. It has previously been shown that intracellular ice forms in rapidly cooled embryonic axes of Acer saccharinum (silver maple) but this is not necessarily lethal when ice crystals are small. This study seeks to understand the nature and extent of damage from intracellular ice, and the course of recovery and regrowth in surviving tissues. Embryonic axes of A. saccharinum, not subjected to dehydration or cryoprotection treatments (water content was 1·9 g H2O g(-1) dry mass), were cooled to liquid nitrogen temperatures using two methods: plunging into nitrogen slush to achieve a cooling rate of 97 °C s(-1) or programmed cooling at 3·3 °C s(-1). Samples were thawed rapidly (177 °C s(-1)) and cell structure was examined microscopically immediately, and at intervals up to 72 h in vitro. Survival was assessed after 4 weeks in vitro. Axes were processed conventionally for optical microscopy and ultrastructural examination. Immediately following thaw after cryogenic exposure, cells from axes did not show signs of damage at an ultrastructural level. Signs that cells had been damaged were apparent after several hours of in vitro culture and appeared as autophagic decomposition. In surviving tissues, dead cells were sloughed off and pockets of living cells were the origin of regrowth. In roots, regrowth occurred from the ground meristem and procambium, not the distal meristem, which became lethally damaged. Regrowth of shoots occurred from isolated pockets of surviving cells of peripheral and pith meristems. The size of these pockets may determine the possibility for, the extent of and the vigour of regrowth. Autophagic degradation and ultimately autolysis of cells following cryo-exposure and formation of small

Method and apparatus for examining a body by means of penetrating radiation such as x-rays

International Nuclear Information System (INIS)

Barnea, D.I.

1984-01-01

An image-reconstructive technique for examining a body by means of penetrating radiation, such as X-rays, is described. A pre-body collimator having a two-dimensional array of radiation-transmitting holes each bordered by radiation non-transmitting walls is disposed between the body and the source of radiation, and a plurality of exposures are made onto a radiation-sensitive surface, in which the radiation is projected through the collimator while the radiation source is at a plurality of different locations, such that during the successive exposures, the radiation from the source passes through different ray paths defined by the holes in the pre-body collimator. The radiation level received by each of the radiation-sensitive surface elements is detected, stored, and processed to reconstruct the two-dimensional radiation pattern but with enhanced resolution. Preferably a post-body collimator is also used to suppress scattering. Described are a four-exposure procedure and a nine-exposure procedure

Isomap transform for segmenting human body shapes.

Science.gov (United States)

Cerveri, P; Sarro, K J; Marchente, M; Barros, R M L

2011-09-01

Segmentation of the 3D human body is a very challenging problem in applications exploiting volume capture data. Direct clustering in the Euclidean space is usually complex or even unsolvable. This paper presents an original method based on the Isomap (isometric feature mapping) transform of the volume data-set. The 3D articulated posture is mapped by Isomap in the pose of Da Vinci's Vitruvian man. The limbs are unrolled from each other and separated from the trunk and pelvis, and the topology of the human body shape is recovered. In such a configuration, Hoshen-Kopelman clustering applied to concentric spherical shells is used to automatically group points into the labelled principal curves. Shepard interpolation is utilised to back-map points of the principal curves into the original volume space. The experimental results performed on many different postures have proved the validity of the proposed method. Reliability of less than 2 cm and 3° in the location of the joint centres and direction axes of rotations has been obtained, respectively, which qualifies this procedure as a potential tool for markerless motion analysis.

On the method of orthogonal projections in the theory of elasticity

Directory of Open Access Journals (Sweden)

Valerii V. Struzhanov

2017-07-01

Full Text Available The method of orthogonal projections applied to the task of determining the stresses in the elastic deformable bodies, which allowed us to relax the requirements to the smoothness of the functions defining external forces and to the components of the tensor of the initial strains, which cause the appearance of balanced self-stresses. Examples of the calculation of quench stresses in a circular cylinder and residual stresses after shrinkage of the binder in composite cylinders made by winding are given.

Longitudinal, lateral and transverse axes of forearm muscles influence the crosstalk in the mechanomyographic signals during isometric wrist postures.

Directory of Open Access Journals (Sweden)

Md Anamul Islam

Full Text Available In mechanomyography (MMG, crosstalk refers to the contamination of the signal from the muscle of interest by the signal from another muscle or muscle group that is in close proximity.The aim of the present study was two-fold: i to quantify the level of crosstalk in the mechanomyographic (MMG signals from the longitudinal (Lo, lateral (La and transverse (Tr axes of the extensor digitorum (ED, extensor carpi ulnaris (ECU and flexor carpi ulnaris (FCU muscles during isometric wrist flexion (WF and extension (WE, radial (RD and ulnar (UD deviations; and ii to analyze whether the three-directional MMG signals influence the level of crosstalk between the muscle groups during these wrist postures.Twenty, healthy right-handed men (mean ± SD: age = 26.7±3.83 y; height = 174.47±6.3 cm; mass = 72.79±14.36 kg participated in this study. During each wrist posture, the MMG signals propagated through the axes of the muscles were detected using three separate tri-axial accelerometers. The x-axis, y-axis, and z-axis of the sensor were placed in the Lo, La, and Tr directions with respect to muscle fibers. The peak cross-correlations were used to quantify the proportion of crosstalk between the different muscle groups.The average level of crosstalk in the MMG signals generated by the muscle groups ranged from: 34.28-69.69% for the Lo axis, 27.32-52.55% for the La axis and 11.38-25.55% for the Tr axis for all participants and their wrist postures. The Tr axes between the muscle groups showed significantly smaller crosstalk values for all wrist postures [F (2, 38 = 14-63, p<0.05, η2 = 0.416-0.769].The results may be applied in the field of human movement research, especially for the examination of muscle mechanics during various types of the wrist postures.

Navigation System Design and State Estimation for a Small Rigid Hull Inflatable Boat (RHIB)

Science.gov (United States)

2014-09-01

modulation to allow for variable motor speeds. The rudder controller utilizes a tuned proportional-integral-derivative controller with set...relative to the inertial frame, resolved along the body axes is defined as [ , , ]b Tbi p q r  , where p is the angular roll rate about 36 the x...parameter-estimation,” in 2001 IEEE International Conference on Acoustics, Speech , and Signal Processing, Salt Lake City, UT, 2001. [15] S. Julier

Micromagnetic simulation of two-body magnetic nanoparticles

Science.gov (United States)

Li, Fei; Lu, Jincheng; Yang, Yu; Lu, Xiaofeng; Tang, Rujun; Sun, Z. Z.

2017-05-01

Field-induced magnetization dynamics was investigated in a system of two magnetic nanoparticles with uniaxial anisotropies and magnetostatic interaction. By using the micromagnetic simulation, ultralow switching field strength was found when the separation distance between the two particles reaches a critical small value on nanometer scale in the perpendicular configuration where the anisotropic axes of the two particles are perpendicular to the separation line. The switching field increases sharply when the separation is away from the critical distance. The same results were observed when varying the radius of particles. The micromagnetic results are consistent with the previous theoretical prediction where dipolar interaction between two single-domain magnetic particles was considered. Our present simulations offered further proofs and possibilities for the low-power applications of information storage as the two-body magnetic nanoparticles could be implemented as a composite information bit.

Influence of the form of the magnetic axis on the regions of stability and their variations (1963); Influence de la forme de l'axe magnetique sur les plages de stabilite et leur variation (1963)

Energy Technology Data Exchange (ETDEWEB)

Mercier, C; Tasso, H [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1963-07-01

We study many cases of plane and twisted magnetic axis and we show for a set of regular magnetic axis tending to racetrack limit, the stability regions tend rapidly to the racetrack stability. But, for the case at two axis apparently not very far, we find that the corresponding regions of stability may be sometimes sensibly different. (authors) [French] Nous etudions plusieurs exemples d'axes magnetiques plans et gauches et montrons que pour une suite d'axes magnetiques qui converge vers une limite du type hippodrome, les plages de stabilite convergent rapidement vers la plage limite. Mais, si on prend deux axes apparemment peu eloignes, on trouve que les plages correspondantes peuvent etre parfois sensiblement differentes. (auteurs)

Reflections from a Creative Community-Based Participatory Research Project Exploring Health and Body Image with First Nations Girls

Directory of Open Access Journals (Sweden)

Jennifer M. Shea PhD

2013-02-01

Full Text Available In Canada, Aboriginal peoples often experience a multitude of inequalities when compared with the general population, particularly in relation to health (e.g., increased incidence of diabetes. These inequalities are rooted in a negative history of colonization. Decolonizing methodologies recognize these realities and aim to shift the focus from communities being researched to being collaborative partners in the research process. This article describes a qualitative community-based participatory research project focused on health and body image with First Nations girls in a Tribal Council region in Western Canada. We discuss our project design and the incorporation of creative methods (e.g., photovoice to foster integration and collaboration as related to decolonizing methodology principles. This article is both descriptive and reflective as it summarizes our project and discusses lessons learned from the process, integrating evaluations from the participating girls as well as our reflections as researchers.

Body: presence and transience

Directory of Open Access Journals (Sweden)

Marcelo Andrés Comandú

2012-11-01

Full Text Available We conceive presence as an event that takes place in the body and among the bodies. In the work of making themselves present, the performer creates a territory-body of habitability/inter-penetration of states, actions, thoughts, voices, sonorities; a body-space with multiple trajectories, withdrawn and projected from its own existence/subjectivity, extended in other matters and exposed to other odies/subjects/objects. We regard the performer’s body as an intense, outstretched, and expanded body. We deal with these categories from the standpoint of various practices and conceptualizations of body and event, in order to reflect on the constitution/construction of presence in performance.

Software defined networks reactive flow programming and load balance switching

OpenAIRE

Καλλιανιώτης, Νικόλαος; Kallianiotis, Nikolaos

2017-01-01

This project serves as a Master Thesis as the requirements of the master’s programme Master of Digital Communications and Networks. It proposes load balancing algorithms applied to Software-Defined Networks to achieve the best possible resource utilisation of each of the links present in a network. The open-sources Opendaylight project and Floodlight project are used as SDN controllers, and the network is emulated using Mininet software

Defining the essential anatomical coverage provided by military body armour against high energy projectiles.

Science.gov (United States)

Breeze, John; Lewis, E A; Fryer, R; Hepper, A E; Mahoney, Peter F; Clasper, Jon C

2016-08-01

Body armour is a type of equipment worn by military personnel that aims to prevent or reduce the damage caused by ballistic projectiles to structures within the thorax and abdomen. Such injuries remain the leading cause of potentially survivable deaths on the modern battlefield. Recent developments in computer modelling in conjunction with a programme to procure the next generation of UK military body armour has provided the impetus to re-evaluate the optimal anatomical coverage provided by military body armour against high energy projectiles. A systematic review of the literature was undertaken to identify those anatomical structures within the thorax and abdomen that if damaged were highly likely to result in death or significant long-term morbidity. These structures were superimposed upon two designs of ceramic plate used within representative body armour systems using a computerised representation of human anatomy. Those structures requiring essential medical coverage by a plate were demonstrated to be the heart, great vessels, liver and spleen. For the 50th centile male anthropometric model used in this study, the front and rear plates from the Enhanced Combat Body Armour system only provide limited coverage, but do fulfil their original requirement. The plates from the current Mark 4a OSPREY system cover all of the structures identified in this study as requiring coverage except for the abdominal sections of the aorta and inferior vena cava. Further work on sizing of plates is recommended due to its potential to optimise essential medical coverage. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Dynamics of rings around elongated bodies

Science.gov (United States)

Sicardy, Bruno; Leiva, Rodrigo; Ortiz, Jose Luis; Santos Sanz, Pablo; Renner, Stefan; El Moutamid, Maryame; Berard, Diane; Desmars, Josselin; Meza, Erick; Rossi, Gustavo; Braga-Ribas, Felipe; Camargo, Julio; Vieira-Martins, Roberto; Morales, Nicolas; Duffard, Rene; Colas, Francois; Maquet, Lucie; Bouley, Sylvain; Bath, Karl-Ludwig; Beisker, Wolfgang; Dauverge, Jean-Luc; Kretlow, Mike; Chariklo Occultations Team; Haumea Occultation Team

2017-10-01

Dense and narrow rings are encountered around small bodies like the Centaur object Chariklo, and possibly Chiron. The rings and central bodies can be studied in great details thanks to stellar occultations, which accuracies at the km-level. Here we present new results from three high-quality occultations by Chariklo observed in 2017. They provide new insights on the ring geometry and Chariklo's shape. Data are currently being analyzed, but preliminary results are consistent with a triaxial model for Chariklo, with semi-axes a>b>c, where (a-b) may reach values as large as 10-15 km, depending on the model.Such large values induce a strong coupling between the body and an initial collisional debris disk from which the rings emerged. This coupling stems from Lindblad resonances between the ring particle mean motion and Chariklo's spin rate. We find that the resonances clear the corotation zone (estimated to lie at about 215 km from Chariklo's center) in very short time scales (centuries) and pushes the material well beyond the 3/2 resonance - that lies at an estimated radius of 280 km, thus consistent with the radius of Chariklo's main ring C1R, 390 km.Other cases will be examined in view of multi-chord stellar occultations by Trans-Neptunian Objects successfully observed in 2017, as they provide constraints for the presence of material around these bodies. Results and dynamical implications will be presented.Part of this work has received funding from the European Research Council under the European Community's H2020 2014-2020 ERC grant Agreement n°669416 "Lucky Star"

Desenvolupament d'un sistema de monitoratge per a Software Defined Networks (SDN)

OpenAIRE

Navarro Sánchez, Albert

2015-01-01

Les Software Defined-Networks (SDN) són una tecnologia emergent que permet als components software estendre funcionalitats sobre la xarxa. En aquest projecte s'estudia com pot encaixar Polygraph, un sistema de monitoratge per a xarxes tradicionals, dins les SDN. Software Defined-Networks (SDN) are a new tecnology that allows software components to add new functionalities on networks. This project studies how Polygraph, a monitoring system for traditional networks, can fit in a SDN scenario.

Sme4 coiled-coil protein mediates synaptonemal complex assembly, recombinosome relocalization, and spindle pole body morphogenesis.

Science.gov (United States)

Espagne, Eric; Vasnier, Christelle; Storlazzi, Aurora; Kleckner, Nancy E; Silar, Philippe; Zickler, Denise; Malagnac, Fabienne

2011-06-28

We identify a large coiled-coil protein, Sme4/PaMe4, that is highly conserved among the large group of Sordariales and plays central roles in two temporally and functionally distinct aspects of the fungal sexual cycle: first as a component of the meiotic synaptonemal complex (SC) and then, after disappearing and reappearing, as a component of the spindle pole body (SPB). In both cases, the protein mediates spatial juxtaposition of two major structures: linkage of homolog axes through the SC and a change in the SPB from a planar to a bent conformation. Corresponding mutants exhibit defects, respectively, in SC and SPB morphogenesis, with downstream consequences for recombination and astral-microtubule nucleation plus postmeiotic nuclear migration. Sme4 is also required for reorganization of recombination complexes in which Rad51, Mer3, and Msh4 foci relocalize from an on-axis position to a between-axis (on-SC) position concomitant with SC installation. Because involved recombinosome foci represent total recombinational interactions, these dynamics are irrespective of their designation for maturation into cross-overs or noncross-overs. The defined dual roles for Sme4 in two different structures that function at distinct phases of the sexual cycle also provide more functional links and evolutionary dynamics among the nuclear envelope, SPB, and SC.

Multiplexed Dosing Assays by Digitally Definable Hydrogel Volumes

DEFF Research Database (Denmark)

Faralli, Adele; Melander, Fredrik; Larsen, Esben Kjær Unmack

2016-01-01

Stable and low-cost multiplexed drug sensitivity assays using small volumes of cells or tissue are in demand for personalized medicine, including patientspecific combination chemotherapy. Spatially defined projected light photopolymerization of hydrogels with embedded active compounds is introduc...

The Effects of Adding Coordinate Axes To a Mental Rotations Task in Measuring Spatial Visualization Ability in Introductory Undergraduate Technical Graphics Courses.

Science.gov (United States)

Branoff, Ted

1998-01-01

Reports on a study to determine whether the presence of coordinate axes in a test of spatial-visualization ability affects scores and response times on a mental-rotations task for students enrolled in undergraduate introductory graphic communications classes. Based on Pavios's dual-coding theory. Contains 36 references. (DDR)

Apparatus and method for supporting and positioning the body to facilitate radiographic mammography procedures

International Nuclear Information System (INIS)

Lasky, H.J.

1977-01-01

A stretcher-like table or cradle for use as a body support during radiological examination is described. The table includes means whereby it may be arcuately pivotally manipulated about each of two mutually perpendicular horizontal axes. For specific uses in mammographic procedures, the support surface or web of the table is provided with a cut-away areal zone through which the gravitationally suspended breast of the female subject depends. Selective and controlled pivotal tilting of the table makes precise orientational positioning of the suspended tissue feasible, so as to provide improved fidelity and enhanced diagnostic value for the radiographic film images produced

Capital projects coordination

Directory of Open Access Journals (Sweden)

Zubović Jovan

2004-01-01

Full Text Available This paper looks at the difficulties of managing modem capital projects and endeavors to reduce the complexities to simpler and more understandable terms. It examines the project environment, defines project management and discusses points of difference from traditional management. In the second part of the paper are presented fundamentals for project success for different types of projects.

Hypothalamic–pituitary–adrenal and hypothalamic–pituitary–gonadal axes: sex differences in regulation of stress responsivity

Science.gov (United States)

Oyola, Mario G.; Handa, Robert J.

2018-01-01

Gonadal hormones play a key role in the establishment, activation, and regulation of the hypothalamic–pituitary–adrenal (HPA) axis. By influencing the response and sensitivity to releasing factors, neurotransmitters, and hormones, gonadal steroids help orchestrate the gain of the HPA axis to fine-tune the levels of stress hormones in the general circulation. From early life to adulthood, gonadal steroids can differentially affect the HPA axis, resulting in sex differences in the responsivity of this axis. The HPA axis influences many physiological functions making an organism’s response to changes in the environment appropriate for its reproductive status. Although the acute HPA response to stressors is a beneficial response, constant activation of this circuitry by chronic or traumatic stressful episodes may lead to a dysregulation of the HPA axis and cause pathology. Compared to males, female mice and rats show a more robust HPA axis response, as a result of circulating estradiol levels which elevate stress hormone levels during non-threatening situations, and during and after stressors. Fluctuating levels of gonadal steroids in females across the estrous cycle are a major factor contributing to sex differences in the robustness of HPA activity in females compared to males. Moreover, gonadal steroids may also contribute to epigenetic and organizational influences on the HPA axis even before puberty. Correspondingly, crosstalk between the hypothalamic–pituitary–gonadal (HPG) and HPA axes could lead to abnormalities of stress responses. In humans, a dysregulated stress response is one of the most common symptoms seen across many neuropsychiatric disorders, and as a result, such interactions may exacerbate peripheral pathologies. In this review, we discuss the HPA and HPG axes and review how gonadal steroids interact with the HPA axis to regulate the stress circuitry during all stages in life. PMID:28859530

Hypothalamic-pituitary-adrenal and hypothalamic-pituitary-gonadal axes: sex differences in regulation of stress responsivity.

Science.gov (United States)

Oyola, Mario G; Handa, Robert J

2017-09-01

Gonadal hormones play a key role in the establishment, activation, and regulation of the hypothalamic-pituitary-adrenal (HPA) axis. By influencing the response and sensitivity to releasing factors, neurotransmitters, and hormones, gonadal steroids help orchestrate the gain of the HPA axis to fine-tune the levels of stress hormones in the general circulation. From early life to adulthood, gonadal steroids can differentially affect the HPA axis, resulting in sex differences in the responsivity of this axis. The HPA axis influences many physiological functions making an organism's response to changes in the environment appropriate for its reproductive status. Although the acute HPA response to stressors is a beneficial response, constant activation of this circuitry by chronic or traumatic stressful episodes may lead to a dysregulation of the HPA axis and cause pathology. Compared to males, female mice and rats show a more robust HPA axis response, as a result of circulating estradiol levels which elevate stress hormone levels during non-threatening situations, and during and after stressors. Fluctuating levels of gonadal steroids in females across the estrous cycle are a major factor contributing to sex differences in the robustness of HPA activity in females compared to males. Moreover, gonadal steroids may also contribute to epigenetic and organizational influences on the HPA axis even before puberty. Correspondingly, crosstalk between the hypothalamic-pituitary-gonadal (HPG) and HPA axes could lead to abnormalities of stress responses. In humans, a dysregulated stress response is one of the most common symptoms seen across many neuropsychiatric disorders, and as a result, such interactions may exacerbate peripheral pathologies. In this review, we discuss the HPA and HPG axes and review how gonadal steroids interact with the HPA axis to regulate the stress circuitry during all stages in life.

Correlation of Theory and Function in Well-Defined Bimetallic Electrocatalysts - Final Report

Energy Technology Data Exchange (ETDEWEB)

Crooks, Richard M.

2014-06-05

The objective of this research proposal was to correlate the structure of nanoparticles that are comprised of ~100-200 atoms to their electrocatalytic function. This objective was based on the growing body of evidence suggesting that catalytic properties can be tailored through controlled synthesis of nanoparticles. What has been missing from many of these studies, and what we are contributing, is a model catalyst that is sufficiently small, structurally well-defined, and well-characterized that its function can be directly predicted by theory. Specifically, our work seeks to develop a fundamental and detailed understanding of the relationship between the structure of nanoscopic oxygen-reduction catalysts and their function. We assembled a team with expertise in theory, synthesis, and advanced characterization methods to address the primary objective of this project. We anticipated the outcomes of the study to be: (1) a better theoretical understanding of how nanoparticle structure affects catalytic properties; (2) the development of advanced, in-situ and ex-situ, atomic-scale characterization methods that are appropriate for particles containing about 100 atoms; and (3) improved synthetic methods that produce unique nanoparticle structures that can be used to test theoretical predictions. During the project period, we have made excellent progress on all three fronts.

Defining and Assessing Team Skills of Business and Accountancy Students

Science.gov (United States)

Alghalith, Nabil; Blum, Michael; Medlock, Amanda; Weber, Sandy

2004-01-01

The objectives of the project are (1) to define the skills necessary for students to work effectively with others to achieve common goals, and (2) to develop an assessment instrument to measure student progress toward achieving these skills. The defined skill set will form a basis for common expectations related to team skills that will be shared…

3D Imaging with a Sonar Sensor and an Automated 3-Axes Frame for Selective Spraying in Controlled Conditions

Directory of Open Access Journals (Sweden)

David Reiser

2017-02-01

Full Text Available Autonomous selective spraying could be a way for agriculture to reduce production costs, save resources, protect the environment and help to fulfill specific pesticide regulations. The objective of this paper was to investigate the use of a low-cost sonar sensor for autonomous selective spraying of single plants. For this, a belt driven autonomous robot was used with an attached 3-axes frame with three degrees of freedom. In the tool center point (TCP of the 3-axes frame, a sonar sensor and a spray valve were attached to create a point cloud representation of the surface, detect plants in the area and perform selective spraying. The autonomous robot was tested on replicates of artificial crop plants. The location of each plant was identified out of the acquired point cloud with the help of Euclidian clustering. The gained plant positions were spatially transformed from the coordinates of the sonar sensor to the valve location to determine the exact irrigation points. The results showed that the robot was able to automatically detect the position of each plant with an accuracy of 2.7 cm and could spray on these selected points. This selective spraying reduced the used liquid by 72%, when comparing it to a conventional spraying method in the same conditions.

Simulación de sistemas radar FMCW basado en Software Defined Radio

OpenAIRE

Vidal Morera, Marc

2016-01-01

This project consists of the simulation of radar systems based on a Software Defined Radio architecture. The initiation of this project was born from the idea to introduce the Software Defined Radio (SDR) in the skeleton of a radar device. The SDR aims to achieve, in a single programmable device, what a radio tramsmitter and receiver do, meaning that most of their components are running in the digital domain. Within the architecture of a radar, it comes to replace the analog components to ...

Micronutrient Supplementation, Dietary Intervention and Resulting Body Weight Gain of Severe Acute Malnourished Children – A Pilot Project Study of OJUS Medical Institute with Existing ICDS Project in Nasik District, Maharashtra

Directory of Open Access Journals (Sweden)

Subhasree Ray

2014-12-01

Full Text Available Introduction: OJUS Medical Institute in collaboration with Women & Child development department of Nashik District, Maharashtra conducted a target oriented pilot project study to see the improvement in body weight gain of SAM children, supplemented with nutritionally enriched diet and micronutrients. The Egg-DOT project is a target vertical intervention study that involved both Anganwadi workers and Community health workers to bring a fruitful result by working hand-in-hand. Rationale: ICDS is one of the best supplementary nutrition programs to address and eliminate malnutrition from the country. To make it more comprehensive and result oriented the pilot project study is formulated and executed to see if the addition in existing system could eradicate malnutrition in an effective manner and strengthen the Govt. health machinery. Objective: The study aimed at working along with the Govt. to reduce severity of malnutrition. It shouted for a healthy public-private relationship to bring optimum result from the existing Govt. project in reducing burden of malnutrition, spreading health education and behavioural modification in the community members by adopting a systematic micronutrient-diet-health education  intervention strategy. Materials & methods: Along with existing nutritional intervention, a small modification in diet is introduced to fulfill the deficit of 300 Kcal approximately. Good quality fat and protein are added to the Anganwadi meal with daily micronutrient supplementation. The supplementation is continued for 30 days in 25 SAM children of 3 to 5 years. The baseline and end line body weight measurements are taken and compared to see the improvement. Result: After 30 days of intervention the supplemented SAM children showed statistically significant increased body weight (P<0.01 with an overall healthy nutritional status. Conclusion: The study showed that public-private collaborative systematic strategy with proper

Body Language in the Classroom

Science.gov (United States)

Miller, Patrick W.

2005-01-01

Ralph Waldo Emerson and Mae West would seem to have little in common, but there is one thing they both understood--the importance of body language. Educators, psychologists, anthropologists and sociologists define body language or nonverbal communication as communication without words. It includes overt behaviors such as facial expressions, eye…

The body type profile of women occupying modern pentathlon

Directory of Open Access Journals (Sweden)

Jagiello Wladyslaw.

2012-11-01

Full Text Available It was made an attempt to define the features of the body structure athletes - members of the Polish national team in modern pentathlon (n = 11. Age athletes were in the range of 18-35 years old (23,4 ± 5,2, and training experience - 6-20 years old (12,4 ± 4,4. The five factors (Rohrera, Queteleta II, Manouvrier, height-weight, pelvic and shoulder, and the total body surface were defined. The share based on body measurements of skin-fat folds using prediction equations Piechaczka is calculated. Total fat as a percentage of body weight using the formula Brożka i Keys is calculated. At all were defined 20 indicators. On the basis of the valuation of the body structure specifies a profile of the subjects were determined. A comparison group is consisted of students of Warsaw University of Technology. The members of the women's national team of Poland in modern pentathlon are characterized, above all, significant indicators of the body length of the upper and lower extremities, with a diameter of forearm, elbow width, as well as the value of the proportion of the body.

Procedure for field axes measurement, beam indication adjustment, and figure of convergence determination within performance tests for radiation therapy equipment

Energy Technology Data Exchange (ETDEWEB)

Quast, U; Krause, K; Rassow, J [Essen Univ. (Gesamthochschule) (Germany, F.R.). Abt. fuer Klinische Strahlenphysik

1976-09-01

A routine measuring procedure for the verification of radiation field axes and figure of convergence within a spatial resolution of +- 0.5 mm is described. Measurements are done in two parallel planes in a certain distance before and behind the presumed isocentre. The used test arrangement permits rapid check and controlled adjustment of the alignment of beam or isocentre indicating devices for all isocentric radiation therapy equipment.

Spatial and body-size dependent response of marine pelagic communities to projected global climate change.

Science.gov (United States)

Lefort, Stelly; Aumont, Olivier; Bopp, Laurent; Arsouze, Thomas; Gehlen, Marion; Maury, Olivier

2015-01-01

Temperature, oxygen, and food availability directly affect marine life. Climate models project a global warming of the ocean's surface (~+3 °C), a de-oxygenation of the ocean's interior (~-3%) and a decrease in total marine net primary production (~-8%) under the 'business as usual' climate change scenario (RCP8.5). We estimated the effects of these changes on biological communities using a coupled biogeochemical (PISCES)--ecosystems (APECOSM) model forced by the physical outputs of the last generation of the IPSL-CM Earth System Model. The APECOSM model is a size-structured bio-energetic model that simulates the 3D dynamical distributions of three interactive pelagic communities (epipelagic, mesopelagic, and migratory) under the effects of multiple environmental factors. The PISCES-APECOSM model ran from 1850 to 2100 under historical forcing followed by RCP8.5. Our RCP8.5 simulation highlights significant changes in the spatial distribution, biomass, and maximum body-size of the simulated pelagic communities. Biomass and maximum body-size increase at high latitude over the course of the century, reflecting the capacity of marine organisms to respond to new suitable environment. At low- and midlatitude, biomass and maximum body-size strongly decrease. In those regions, large organisms cannot maintain their high metabolic needs because of limited and declining food availability. This resource reduction enhances the competition and modifies the biomass distribution among and within the three communities: the proportion of small organisms increases in the three communities and the migrant community that initially comprised a higher proportion of small organisms is favored. The greater resilience of small body-size organisms resides in their capacity to fulfill their metabolic needs under reduced energy supply and is further favored by the release of predation pressure due to the decline of large organisms. These results suggest that small body-size organisms might be

GANDALF - Graphical Astrophysics code for N-body Dynamics And Lagrangian Fluids

Science.gov (United States)

Hubber, D. A.; Rosotti, G. P.; Booth, R. A.

2018-01-01

GANDALF is a new hydrodynamics and N-body dynamics code designed for investigating planet formation, star formation and star cluster problems. GANDALF is written in C++, parallelized with both OPENMP and MPI and contains a PYTHON library for analysis and visualization. The code has been written with a fully object-oriented approach to easily allow user-defined implementations of physics modules or other algorithms. The code currently contains implementations of smoothed particle hydrodynamics, meshless finite-volume and collisional N-body schemes, but can easily be adapted to include additional particle schemes. We present in this paper the details of its implementation, results from the test suite, serial and parallel performance results and discuss the planned future development. The code is freely available as an open source project on the code-hosting website github at https://github.com/gandalfcode/gandalf and is available under the GPLv2 license.

Project management of life-science research projects: project characteristics, challenges and training needs.

Science.gov (United States)

Beukers, Margot W

2011-02-01

Thirty-four project managers of life-science research projects were interviewed to investigate the characteristics of their projects, the challenges they faced and their training requirements. A set of ten discriminating parameters were identified based on four project categories: contract research, development, discovery and call-based projects--projects set up to address research questions defined in a call for proposals. The major challenges these project managers are faced with relate to project members, leadership without authority and a lack of commitment from the respective organization. Two-thirds of the project managers indicated that they would be interested in receiving additional training, mostly on people-oriented, soft skills. The training programs that are currently on offer, however, do not meet their needs. Copyright © 2010 Elsevier Ltd. All rights reserved.

Ramifications of defining high-level waste

International Nuclear Information System (INIS)

Wood, D.E.; Campbell, M.H.; Shupe, M.W.

1987-01-01

The Nuclear Regulatory Commission (NRC) is considering rule making to provide a concentration-based definition of high-level waste (HLW) under authority derived from the Nuclear Waste Policy Act (NWPA) of 1982 and the Low Level Waste Policy Amendments Act of 1985. The Department of Energy (DOE), which has the responsibility to dispose of certain kinds of commercial waste, is supporting development of a risk-based classification system by the Oak Ridge National Laboratory to assist in developing and implementing the NRC rule. The system is two dimensional, with the axes based on the phrases highly radioactive and requires permanent isolation in the definition of HLW in the NWPA. Defining HLW will reduce the ambiguity in the present source-based definition by providing concentration limits to establish which materials are to be called HLW. The system allows the possibility of greater-confinement disposal for some wastes which do not require the degree of isolation provided by a repository. The definition of HLW will provide a firm basis for waste processing options which involve partitioning of waste into a high-activity stream for repository disposal, and a low-activity stream for disposal elsewhere. Several possible classification systems have been derived and the characteristics of each are discussed. The Defense High Level Waste Technology Lead Office at DOE - Richland Operations Office, supported by Rockwell Hanford Operations, has coordinated reviews of the ORNL work by a technical peer review group and other DOE offices. The reviews produced several recommendations and identified several issues to be addressed in the NRC rule making. 10 references, 3 figures

Body Dysmorphic Disorder

Directory of Open Access Journals (Sweden)

Perihan Cam Ray

2012-12-01

Full Text Available Body dysmorphic disorder is a type of mental illness, wherein the affected person is concerned with body image, manifested as excessive concern about and preoccupation with a perceived defect of their physical features. Although it is a common disease and has been defined in the literature over a century, it is not a well known disease. Chronic, treatment resistant and sometimes delusional nature could result in severe functional impairment. The diagnosis and appropriate therapy of disorder are crucial because of increased suicidality and reduction in life quality. In this article the symptoms, etiology, clinical features and treatment of body dysmorphic disorder are briefly reviewed.

Voluntary running of defined distances reduces body adiposity and its associated inflammation in C57BL/6 mice fed a high-fat diet.

Science.gov (United States)

Yan, Lin; Sundaram, Sneha; Nielsen, Forrest H

2017-11-01

This study investigated the effect of voluntary running of defined distances on body adiposity in male C57BL/6 mice fed a high-fat diet. Mice were assigned to 6 groups and fed a standard AIN93G diet (sedentary) or a modified high-fat AIN93G diet (sedentary; unrestricted running; or 75%, 50%, or 25% of unrestricted running) for 12 weeks. The average running distance was 8.3, 6.3, 4.2, and 2.1 km/day for the unrestricted, 75%, 50%, and 25% of unrestricted runners, respectively. Body adiposity was 46% higher in sedentary mice when fed the high-fat diet instead of the standard diet. Running decreased adiposity in mice fed the high-fat diet in a dose-dependent manner but with no significant difference between sedentary mice and those running 2.1 km/day. In sedentary mice, the high-fat instead of the standard diet increased insulin resistance, hepatic triacylglycerides, and adipose and plasma concentrations of leptin and monocyte chemotactic protein-1 (MCP-1). Running reduced these variables in a dose-dependent manner. Adipose adiponectin was lowest in sedentary mice fed the high-fat diet; running raised adiponectin in both adipose tissue and plasma. Running 8.3 and 6.3 km/day had the greatest, but similar, effects on the aforementioned variables. Running 2.1 km/day did not affect these variables except, when compared with sedentariness, it significantly decreased MCP-1. The findings showed that running 6.3 kg/day was optimal for reducing adiposity and associated inflammation that was increased in mice by feeding a high-fat diet. The findings suggest that voluntary running of defined distances may counteract the obesogenic effects of a high-fat diet.

Project Communications Management

OpenAIRE

José C. Santiago-Guevara; Mauricio Rojas-Contreras; Luis A. Esteban-Villamizar

2013-01-01

This article presents a review in relation to the object of study: Communications Management as an important factor in the management of projects. The review includes the most relevant and most renowned authors in the field of project management, focusing on telecommunications projects, which lets you define a communications management model.

Obesity paradox in cancer: new insights provided by body composition.

Science.gov (United States)

Gonzalez, Maria Cristina; Pastore, Carla A; Orlandi, Silvana P; Heymsfield, Steven B

2014-05-01

Obesity, defined by body mass index (BMI), appears to have a paradoxical protective effect in several chronic diseases. We investigated the obesity paradox in cancer patients by using body composition. The study was an observational study of 175 cancer patients assessed before chemotherapy. Obesity was defined as BMI (in kg/m(2)) ≥30 or fat mass index (FMI; fat mass divided by the square of height) ≥5.2 (men) and ≥8.2 (women) measured by using a bioelectrical impedance analysis. Low muscle mass (sarcopenia) was defined as fat-free mass index (fat-free mass divided by the square of height) cancer patients only when obesity is defined by BMI. Patients with sarcopenic obesity had the poorest prognosis. Cancer patients with high mortality risk can be identified by a body-composition assessment.

Clustering ERP implementation project activities: a foundation for project size definition

NARCIS (Netherlands)

Janssens, G.; Kusters, R.J.; Heemstra, F.J.; Sadiq, A.; Reichert, M.; Schultz, K.; Trienekens, J.J.M.; Moller, C.; Kusters, R.J.

2007-01-01

The size of an ERP project can be a useful measurement for predicting the effort needed to complete an ERP implementation project. Because this measurement does not exist, research is needed to find a set of variables which can define the size of an ERP implementation project. This paper shows 21

Toward a permanent lunar settlement in the coming decade: the Columbus Project

Energy Technology Data Exchange (ETDEWEB)

Hyde, R.A.; Ishikawa, M.Y.; Wood, L.L.

1985-11-19

The motivation for creating a permanent lunar settlement is sketched, and reasons for doing so in the coming decade are put forward. A basic plan to accomplish this is outlined, along technical and programmatic axes. It is concluded that founding a lunar settlement on the five hundredth anniversary of the Columbus landing - a Columbus Project - could be executed as a volunteer-intensive American enterprise requiring roughly six thousand man-years of skilled endeavor and a total Governmental contribution of the order of a half-billion dollars. 8 figs.

Toward a permanent lunar settlement in the coming decade: the Columbus Project

International Nuclear Information System (INIS)

Hyde, R.A.; Ishikawa, M.Y.; Wood, L.L.

1985-01-01

The motivation for creating a permanent lunar settlement is sketched, and reasons for doing so in the coming decade are put forward. A basic plan to accomplish this is outlined, along technical and programmatic axes. It is concluded that founding a lunar settlement on the five hundredth anniversary of the Columbus landing - a Columbus Project - could be executed as a volunteer-intensive American enterprise requiring roughly six thousand man-years of skilled endeavor and a total Governmental contribution of the order of a half-billion dollars. 8 figs

Relationships and project marketing success

DEFF Research Database (Denmark)

Skaates, Maria Anne; Tikkanen, Henrikki; Lindblom, Jarno

2002-01-01

Project operations are a dominating mode of international business. Managing relationships and networks is crucial to project marketing success both at the level of the individual project and at the level of multiple projects. This article first defines key characteristics of project business, id...

Integrated Project Teams - An Essential Element of Project Management during Project Planning and Execution - 12155

Energy Technology Data Exchange (ETDEWEB)

Burritt, James G.; Berkey, Edgar [Longenecker and Associates, Las Vegas, NV 89135 (United States)

2012-07-01

Managing complex projects requires a capable, effective project manager to be in place, who is assisted by a team of competent assistants in various relevant disciplines. This team of assistants is known as the Integrated Project Team (IPT). he IPT is composed of a multidisciplinary group of people who are collectively responsible for delivering a defined project outcome and who plan, execute, and implement over the entire life-cycle of a project, which can be a facility being constructed or a system being acquired. An ideal IPT includes empowered representatives from all functional areas involved with a project-such as engineering design, technology, manufacturing, test and evaluation, contracts, legal, logistics, and especially, the customer. Effective IPTs are an essential element of scope, cost, and schedule control for any complex, large construction project, whether funded by DOE or another organization. By recently assessing a number of major, on-going DOE waste management projects, the characteristics of high performing IPTs have been defined as well as the reasons for potential IPT failure. Project managers should use IPTs to plan and execute projects, but the IPTs must be properly constituted and the members capable and empowered. For them to be effective, the project manager must select the right team, and provide them with the training and guidance for them to be effective. IPT members must treat their IPT assignment as a primary duty, not some ancillary function. All team members must have an understanding of the factors associated with successful IPTs, and the reasons that some IPTs fail. Integrated Project Teams should be used by both government and industry. (authors)

Geodetic contributions to IWRM-projects in middle Java, Indonesia

Science.gov (United States)

Schmitt, Günter

2010-12-01

The district of Gunung Kidul in middle Java is one of the poorest regions in Indonesia. The essential reason is the acute water scarcity in this karst region during the months of the dry season. As a consequence of the poor living conditions many people have migrated away and therefore the development of the region is stagnating. During the last few years two projects have been initiated under the theme “Integrated Water Resources Management” in order to improve the water supply situation, both funded by the German Federal Ministry of Education and Research, and realized essentially by institutes of the University of Karlsruhe. Geodetic sub-projects are integrated into both projects. Special surveying activities had been, and have still to be, carried out to realise the geometrical basis for several other sub-projects. The particular contributions are 3D cave measurements for visualisation and planning, staking out of drilling points and construction axes, the definition of a common reference system, the surveying of the water distribution network and its technical facilities, the setting up and the management of a geographical information system (GIS), as well as special measurements such as dam monitoring or controlling of a vertical drilling machine. The paper reviews these projects and describes the geodetic activities.

Acoustic axes in weak triclinic anisotropy

Czech Academy of Sciences Publication Activity Database

Vavryčuk, Václav

2005-01-01

Roč. 163, č. 2 (2005), s. 629-638 ISSN 0956-540X R&D Projects: GA AV ČR IAA3012309 Institutional research plan: CEZ:AV0Z30120515 Keywords : elastic-wave theory * perturbation methods * seismic anisotropy Subject RIV: DC - Siesmology, Volcanology, Earth Structure Impact factor: 1.826, year: 2005

184 Compounding in Igala: Defining Criteria, Forms and Functions ...

African Journals Online (AJOL)

Ike Odimegwu

West Benue-Congo language spoken in north central Nigeria. Defining ..... argues, in Ígálà, ọ́ma 'child', for instance, can stand in for the noun phrase 'ọ́ma óko' 'Oko's .... e.g. 'in Pawnee it is mainly body part words which are incorporated' (c.f. ...

Project implementation plan: ASTD remote deployment

International Nuclear Information System (INIS)

CRASS, D.W.

1999-01-01

This document is the project implementation plan for the ASTD Remote Deployment Project. The Plan identifies the roles and responsibilities for the project and defines the integration between the ASTD Project and the B-Cell Cleanout Project

The Canada Goose Project: A First Project with Children under 3

Science.gov (United States)

Brewer, Ruth A.

2010-01-01

This project report describes how five children (an infant, three toddlers, and a preschooler) enrolled at a private day care home engaged in their first journey into project work through a study of Canada geese living on a nearby body of water. Prior to the experience described in this paper, the author had used the Project Approach only with…

Respiratory compensation in projection imaging using a magnification and displacement model

International Nuclear Information System (INIS)

Crawford, C.R.; King, K.F.; Ritchie, C.J.; Godwin, J.D.

1996-01-01

Respiratory motion during the collection of computed tomography (CT) projections generates structured artifacts and a loss of resolution that can render the scans unusable. This motion is problematic in scans of those patients who cannot suspend respiration, such as the very young or incubated patients. In this paper, the authors present an algorithm that can be used to reduce motion artifacts in CT scans caused by respiration. An approximate model for the effect of respiration is that the object cross section under interrogation experiences time-varying magnification and displacement along two axes. Using this model an exact filtered backprojection algorithm is derived for the case of parallel projections. The result is extended to generate an approximate reconstruction formula for fan-beam projections. Computer simulations and scans of phantoms on a commercial CT scanner validate the new reconstruction algorithms for parallel and fan-beam projections. Significant reduction in respiratory artifacts is demonstrated clinically when the motion model is satisfied. The method can be applied to projection data used in CT single photon emission computed tomography (SPECT), positron emission tomography (PET), and magnetic resonance imaging (MRI)

Visualizing Epithelial Expression in Vertical and Horizontal Planes With Dual Axes Confocal Endomicroscope Using Compact Distal Scanner.

Science.gov (United States)

Li, Gaoming; Li, Haijun; Duan, Xiyu; Zhou, Quan; Zhou, Juan; Oldham, Kenn R; Wang, Thomas D

2017-07-01

The epithelium is a thin layer of tissue that lines hollow organs, such as colon. Visualizing in vertical cross sections with sub-cellular resolution is essential to understanding early disease mechanisms that progress naturally in the plane perpendicular to the tissue surface. The dual axes confocal architecture collects optical sections in tissue by directing light at an angle incident to the surface using separate illumination and collection beams to reduce effects of scattering, enhance dynamic range, and increase imaging depth. This configuration allows for images to be collected in the vertical as well as horizontal planes. We designed a fast, compact monolithic scanner based on the principle of parametric resonance. The mirrors were fabricated using microelectromechanical systems (MEMS) technology and were coated with aluminum to maximize near-infrared reflectivity. We achieved large axial displacements [Formula: see text] and wide lateral deflections >20°. The MEMS chip has a 3.2×2.9 mm 2 form factor that allows for efficient packaging in the distal end of an endomicroscope. Imaging can be performed in either the vertical or horizontal planes with [Formula: see text] depth or 1 ×1 mm 2 area, respectively, at 5 frames/s. We systemically administered a Cy5.5-labeled peptide that is specific for EGFR, and collected near-infrared fluorescence images ex vivo from pre-malignant mouse colonic epithelium to reveal the spatial distribution of this molecular target. Here, we demonstrate a novel scanning mechanism in a dual axes confocal endomicroscope that collects optical sections of near-infrared fluorescence in either vertical or horizontal planes to visualize molecular expression in the epithelium.

User defined function for transformation of ellipsoidal coordinates

Directory of Open Access Journals (Sweden)

Ganić Aleksandar

2014-01-01

Full Text Available The topographic plane of the Earth has irregular shape, and for the purpose of mathematical defining, it is to be approximated by rotational ellipsoid. As local geodetic datum, rotational ellipsoids of various sizes are used in the world. More widely usage of the GPS while performing surveying tasks has resulted in the need to define global geodetic datum in order to obtain the best approximation the entire Earth. For this purpose, geocentric rotational ellipsoid WGS84 was defined and the results of the GPS measurements are shown in relation to it. By applying the appropriate equations, the ellipsoidal coordinates are being transformed from WGS84 into the coordinates on the local rotational ellipsoid, i.e. on the view plane. The paper shows User Defined Function created for Excel, by which the coordinates in the territory of Belgrade are being transformed from WGS84 of rotational ellipsoid into the Gauss-Krüger projection plane.

Multi-Functional Sensor System for Heart Rate, Body Position and Movement Intensity Analysis

Directory of Open Access Journals (Sweden)

Michael MAO

2008-12-01

Full Text Available A novel multi-functional wearable sensor has been developed with multi-axis accelerometer, disposable hydro-gel electrodes, and analog filtering components. This novel sensor implementation can be used for detecting common body positions, movement intensity, and measures bio-potential signals for ECG and heart rate analysis. Based on the novel sensor principle, a prototype combines position detection, heart rate detection, and motion intensity level detection together in a handheld device that records the physiological information and wirelessly transmits the signals through Bluetooth to a mobile phone. Static body positions such as standing/sitting, lying supine, prone, and on the sides have been detected with high accuracy (97.7 % during the subject tests. Further, an algorithm that detects body movement intensity that can potentially be applied in real-time monitoring physical activity level is proposed based on average variance values. Motion intensity results show variance values increase and exercise intensity increases for almost all of the cases. A clear relation between movement intensity level shown by an increase in frequency and/or speed of exercise increases the variance values detected in all three spatial axes.

A guide to defining the competence required of a consultant in clinical chemistry and laboratory medicine.

Science.gov (United States)

Beastall, Graham; Kenny, Desmond; Laitinen, Paivi; ten Kate, Joop

2005-01-01

A definition has been agreed for the most senior professional (consultant) in clinical chemistry and laboratory medicine. A model job description for a consultant has been determined, which is intended to act as a toolkit to assist employing authorities and professional bodies to define the role of individual consultant posts. A total of 86 competences for a consultant have been designated and expressed in the form of simple generic proficiency standards. These competences have been allocated to six broad areas: clinical [13]; scientific [15]; technical [12]; communication [12]; management and leadership [20]; professional autonomy and accountability [14]. The competences are intended to be illustrative rather than definitive and to enable the duties of any consultant post to be defined. Assessment of competence is likely to entail consideration of qualifications, registration status, continuing professional development and performance review. The project is intended as a guide to European societies of clinical chemistry and laboratory medicine. The guide should be capable of local interpretation to encourage a greater degree of commonality in the role of the consultant whilst protecting national identity. The guide should stimulate international understanding and collaboration and contribute to an overall improvement in the quality of practice.

The Role of the Project Management Office on Information Technology Project Success

Science.gov (United States)

Stewart, Jacob S.

2010-01-01

The rate of failed and challenged Information Technology (IT) projects is too high according to the CHAOS Studies by the Standish Group and the literature on project management (Standish Group, 2008). The CHAOS Studies define project success as meeting the triple constraints of scope, time, and cost. Assessing critical success factors is another…

Living Polycondensation: Synthesis of Well-Defined Aromatic Polyamide-Based Polymeric Materials

KAUST Repository

Alyami, Mram Z.

2016-11-01

Chain growth condensation polymerization is a powerful tool towards the synthesis of well-defined polyamides. This thesis focuses on one hand, on the synthesis of well-defined aromatic polyamides with different aminoalkyl pendant groups with low polydispersity and controlled molecular weights, and on the other hand, on studying their thermal properties. In the first project, well-defined poly (N-octyl-p-aminobenzoate) and poly (N-butyl-p-aminobenzoate) were synthesized, and for the first time, their thermal properties were studied. In the second project, ethyl4-aminobenzoate, ethyl 4-octyl aminobenzoate and 4-(hydroxymethyl) benzoic acid were used as novel efficient initiators of ε-caprolactone with t-BuP2 as a catalyst. Macroinitiator and Macromonomer of poly (ε-caprolactone) were synthesized with ethyl 4-octyl aminobenzoate and ethyl 4-aminobenzoate as initiators to afford polyamide-block-poly (ε-caprolactone) and polyamide-graft-poly (ε-caprolactone) by chain growth condensation polymerization (CGCP). In the third project, a new study has been done on chain growth condensation polymerization to discover the probability to synthesize new polymers and studied their thermal properties. For this purpose, poly (N-cyclohexyl-p-aminobenzoate) and poly (N-hexyl-p-aminobenzoate) were synthesized with low polydispersity and controlled molecular weights.

Chinese Manned Space Utility Project

Science.gov (United States)

Gu, Y.

Since 1992 China has been carrying out a conspicuous manned space mission A utility project has been defined and created during the same period The Utility Project of the Chinese Manned Space Mission involves wide science areas such as earth observation life science micro-gravity fluid physics and material science astronomy space environment etc In the earth observation area it is focused on the changes of global environments and relevant exploration technologies A Middle Revolution Image Spectrometer and a Multi-model Micro-wave Remote Sensor have been developed The detectors for cirrostratus distribution solar constant earth emission budget earth-atmosphere ultra-violet spectrum and flux have been manufactured and tested All of above equipment was engaged in orbital experiments on-board the Shenzhou series spacecrafts Space life science biotechnologies and micro-gravity science were much concerned with the project A series of experiments has been made both in ground laboratories and spacecraft capsules The environmental effect in different biological bodies in space protein crystallization electrical cell-fusion animal cells cultural research on separation by using free-low electrophoresis a liquid drop Marangoni migration experiment under micro-gravity as well as a set of crystal growth and metal processing was successfully operated in space The Gamma-ray burst and high-energy emission from solar flares have been explored A set of particle detectors and a mass spectrometer measured

Dynamical Studies of N-Body Gravity and Tidal Dissipation in the TRAPPIST-1 Star System

Science.gov (United States)

Nayak, Michael; Kuettel, Donald H.; Stebler, Shane T.; Udrea, Bogdan

2018-01-01

To date, we have discovered a total of 2,729 planetary systems that contain more than 3,639 known exoplanets [1]. A majority of these are defined as compact systems, containing multiple exoplanets within 0.25 AU of the central star. It has been shown that tightly packed exoplanets avoid colliding due to long-term resonance-induced orbit stability [2]. However, due to extreme proximity, these planets experience intense gravitational forces from each other that are unprecedented within our own solar system, which makes the existence of exomoons doubtful. We present the results of an initial study evaluating dynamical stability of potential exomoons within such highly compact systems.This work is baselined around TRAPPIST-1, an ultra-cool dwarf star that hosts seven temperate terrestrial planets, three of which are in the habitable zone, orbiting within 0.06 AU [3]. N-body simulations place a grid of test particles varying semi-major axis, eccentricity, and inclination around the three habitable zone planets. We find that most exomoons with semi-major axes less than half the Hill sphere of their respective planet are stable over 10 kyrs, with several stable over 300 kyrs.However, in compact systems, tidal influences from other planets can compete with tidal effects from the primary planet, resulting in possible instabilities and massive amounts of tidal dissipation. We investigate these effects with a large grid search that incorporates exomoon radius, tidal quality factor and a range of planet rigidities. Results of simulations that combine n-body gravity effects with both planetary and satellite tides are presented and contrasted with n-body results. Finally, we examine long-term stability (> 1Myrs) of the stable subset of test particles from the n-body simulation with the addition of tidal dissipation, to determine if exomoons can survive around planets e, f, and g in the TRAPPIST-1 system.[1] Schneider (2017). The Extrasolar Planets Encyclopedia. http

Core Standards of the EUBIROD Project. Defining a European Diabetes Data Dictionary for Clinical Audit and Healthcare Delivery.

Science.gov (United States)

Cunningham, S G; Carinci, F; Brillante, M; Leese, G P; McAlpine, R R; Azzopardi, J; Beck, P; Bratina, N; Bocquet, V; Doggen, K; Jarosz-Chobot, P K; Jecht, M; Lindblad, U; Moulton, T; Metelko, Ž; Nagy, A; Olympios, G; Pruna, S; Skeie, S; Storms, F; Di Iorio, C T; Massi Benedetti, M

2016-01-01

A set of core diabetes indicators were identified in a clinical review of current evidence for the EUBIROD project. In order to allow accurate comparisons of diabetes indicators, a standardised currency for data storage and aggregation was required. We aimed to define a robust European data dictionary with appropriate clinical definitions that can be used to analyse diabetes outcomes and provide the foundation for data collection from existing electronic health records for diabetes. Existing clinical datasets used by 15 partner institutions across Europe were collated and common data items analysed for consistency in terms of recording, data definition and units of measurement. Where necessary, data mappings and algorithms were specified in order to allow partners to meet the standard definitions. A series of descriptive elements were created to document metadata for each data item, including recording, consistency, completeness and quality. While datasets varied in terms of consistency, it was possible to create a common standard that could be used by all. The minimum dataset defined 53 data items that were classified according to their feasibility and validity. Mappings and standardised definitions were used to create an electronic directory for diabetes care, providing the foundation for the EUBIROD data analysis repository, also used to implement the diabetes registry and model of care for Cyprus. The development of data dictionaries and standards can be used to improve the quality and comparability of health information. A data dictionary has been developed to be compatible with other existing data sources for diabetes, within and beyond Europe.

Body / Antibody

Directory of Open Access Journals (Sweden)

Lawrence R. Schehr

1996-06-01

Full Text Available Unique object in the exchange-system, the gay body occupies a locus where a phantom identity and an imagined reciprocity define the poles of the subject-object relation. Made of the right stuff, it is an object circulating in a system that tends to reproduce the concept of identity in its search for mirror images of itself. Often rejected by the world, it has recently become a cynosure equated with sickness, pestilence, and death in the age of AIDS. The representations of that object change: no longer perceived as a part of libidinal economy, it has become a mass of symptoms, having changed from being an index of sexuality into being the visible dissipation of the flesh. The gay body in the age of AIDS is the mark of a pariah with the abject nature of the outcast. The body with AIDS takes the form of a text made of many signs and with many ways of reading the checkerboard pattern of the flesh. And the AIDS-narrative turns the body into the limit of the representable.

Definably compact groups definable in real closed fields. I

OpenAIRE

Barriga, Eliana

2017-01-01

We study definably compact definably connected groups definable in a sufficiently saturated real closed field $R$. We introduce the notion of group-generic point for $\\bigvee$-definable groups and show the existence of group-generic points for definably compact groups definable in a sufficiently saturated o-minimal expansion of a real closed field. We use this notion along with some properties of generic sets to prove that for every definably compact definably connected group $G$ definable in...

Specific enkephalin-degrading aminopeptidase activity in the HPT and HPO axes of rats with breast cancer induced by N-methyl nitrosourea.

Science.gov (United States)

Carrera, María del Pilar; Ramírez-Expósito, María Jesús; Valenzuela, María Teresa; García, María Jesús; Mayas, María Dolores; Arias de Saavedra, José Manuel; Sánchez, Rafael; Pérez, María del Carmen; Martínez-Martos, José Manuel

2005-01-15

State and function of breast depend on an endocrinological balance, the upsetting of which can be a factor favorable to the development of cancer. Enkephalins (ENK) have been considered as a particular form of adaptation to defense to the organism against neoplastic processes. However, ENK may modify the endocrine functions of glands such as the ovary or the thyroid through the hypothalamus-pituitary axis, acting direct or indirectly as endocrine, paracrine or autocrine stimulatory growth factors. The present work analyses enkephalin-degrading tyrosyl aminopeptidase (EDA) activity in the hypothalamus-pituitary-thyroid (HPT) and hypothalamus-pituitary-ovary (HPO) axes in a rat model of breast cancer induced by N-methyl-nitrosourea (NMU) to state the relationship between ENK levels modification through EDA activity at different neuroendocrine levels and breast cancer. Results obtained show a decrease in EDA activity in hypothalamus, anterior and posterior pituitary, thyroid and ovary, suggesting increased levels of ENK in all these locations. These ENK may induce breast cancer cell growth and progression not only at breast level, but also acting at several neuroendocrine levels such as the HPT and HPO axes, inducing an unbalance of several other hormones, which could also facilitate the progression of cancer as an undesirable concomitant effect.

Body typing of children and adolescents using 3D-body scanning.

Directory of Open Access Journals (Sweden)

Henry Loeffler-Wirth

Full Text Available Three-dimensional (3D- body scanning of children and adolescents allows the detailed study of physiological development in terms of anthropometrical alterations which potentially provide early onset markers for obesity. Here, we present a systematic analysis of body scanning data of 2,700 urban children and adolescents in the age range between 5 and 18 years with the special aim to stratify the participants into distinct body shape types and to describe their change upon development. In a first step, we extracted a set of eight representative meta-measures from the data. Each of them collects a related group of anthropometrical features and changes specifically upon aging. In a second step we defined seven body types by clustering the meta-measures of all participants. These body types describe the body shapes in terms of three weight (lower, normal and overweight and three age (young, medium and older categories. For younger children (age of 5-10 years we found a common 'early childhood body shape' which splits into three weight-dependent types for older children, with one or two years delay for boys. Our study shows that the concept of body types provides a reliable option for the anthropometric characterization of developing and aging populations.

Kinematic Measurement of Knee Prosthesis from Single-Plane Projection Images

Science.gov (United States)

Hirokawa, Shunji; Ariyoshi, Shogo; Takahashi, Kenji; Maruyama, Koichi

In this paper, the measurement of 3D motion from 2D perspective projections of knee prosthesis is described. The technique reported by Banks and Hodge was further developed in this study. The estimation was performed in two steps. The first-step estimation was performed on the assumption of orthogonal projection. Then, the second-step estimation was subsequently carried out based upon the perspective projection to accomplish more accurate estimation. The simulation results have demonstrated that the technique archived sufficient accuracies of position/orientation estimation for prosthetic kinematics. Then we applied our algorithm to the CCD images, thereby examining the influences of various artifacts, possibly incorporated through an imaging process, on the estimation accuracies. We found that accuracies in the experiment were influenced mainly by the geometric discrepancies between the prosthesis component and computer generated model and by the spacial inconsistencies between the coordinate axes of the positioner and that of the computer model. However, we verified that our algorithm could achieve proper and consistent estimation even for the CCD images.

23 CFR 810.302 - Eligible projects.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Eligible projects. 810.302 Section 810.302 Highways... SPECIAL USE HIGHWAY PROJECTS Federal-Aid Urban System Nonhighway Public Mass Transit Projects § 810.302 Eligible projects. (a) Eligible projects are those defined as nonhighway public mass transit projects in...

Scan posture definition and hip girth measurement: the impact on clothing design and body scanning.

Science.gov (United States)

Gill, Simeon; Parker, Christopher J

2017-08-01

Ergonomic measurement is central to product design and development; especially for body worn products and clothing. However, there is a large variation in measurement definitions, complicated by new body scanning technology that captures measurements in a posture different to traditional manual methods. Investigations of hip measurement definitions in current clothing measurement practices supports analysis of the effect of scan posture and hip measurement definition on the circumferences of the hip. Here, the hip girth is a key clothing measurement that is not defined in current body scanning measurement standards. Sixty-four participants were scanned in the standard scan posture of a [TC] 2 body scanner, and also in a natural posture similar to that of traditional manual measurement collection. Results indicate that scan posture affects hip girth circumferences, and that some current clothing measurement practices may not define the largest lower body circumference. Recommendations are made concerning how the hip is defined in measurement practice and within body scanning for clothing product development. Practitioner Summary: The hip girth is an important measurement in garment design, yet its measurement protocol is not currently defined. We demonstrate that body posture during body scanning affects hip circumferences, and that current clothing measurement practices may not define the largest lower body circumference. This paper also provides future measurement practice recommendations.

Generation of Supramolecular Chirality around Twofold Rotational or Helical Axes in Crystalline Assemblies of Achiral Components

Directory of Open Access Journals (Sweden)

Mikiji Miyata

2015-10-01

Full Text Available A multi-point approximation method clarifies supramolecular chirality of twofold rotational or helical assemblies as well as bundles of the one-dimensional (1D assemblies. While one-point approximation of materials claims no chirality generation of such assemblies, multi-point approximations do claim possible generation in the 1D assemblies of bars and plates. Such chirality derives from deformations toward three-axial directions around the helical axes. The chiral columns are bundled in chiral ways through symmetry operations. The preferable right- or left-handed columns are bundled together to yield chiral crystals with right- or left-handedness, respectively, indicating that twofold helix symmetry operations cause chiral crystals composed of achiral components via a three-stepwise and three-directional process.

Editorial: Body Movements

Directory of Open Access Journals (Sweden)

Carina Assuncao

2018-01-01

Full Text Available Today, the juxtaposition between physical bodies and the gameworld is ever more fluid. Virtual Reality headsets are available at game stores with more AAA games being created for the format. The release of the Nintendo Switch and its dynamic JoyCon controllers reintroduce haptic movement based controls.  Pokémon GO’s augmented reality took gamers outdoors and has encouraged the Harry Potter franchise to follow in its mobile footsteps. Each development encourages a step further into the digital world. At the same time, the movement of bodies always has political dimensions. We live in a world where walls seem like solutions to the movement of bodies, while the mere meeting of bodies elsewhere – for sex, marriage and other reasons – is still forbidden by many states’ rules. Games and game-like interfaces have shown the ability to bend those rules, and to sometimes project other worlds and rule systems over our world in order to make bodies move and meet. For this special issue on ‘Body Movements’, Press Start invited authors to focus on embodiment, body movements, political bodies, community bodies, virtual bodies, physical bodies, feminine, masculine, trans- bodies, agency or its lack, and anything else in between. The response to this invitation was variegated, and provocative, as outlined here.

Goodness-of-Fit Tests For Elliptical and Independent Copulas through Projection Pursuit

Directory of Open Access Journals (Sweden)

Jacques Touboul

2011-04-01

Full Text Available Two goodness-of-fit tests for copulas are being investigated. The first one deals with the case of elliptical copulas and the second one deals with independent copulas. These tests result from the expansion of the projection pursuit methodology that we will introduce in the present article. This method enables us to determine on which axis system these copulas lie as well as the exact value of these very copulas in the basis formed by the axes previously determined irrespective of their value in their canonical basis. Simulations are also presented as well as an application to real datasets.

Three-axial evaluation of whole-body vibration in agricultural telehandlers: The effects of an active cab-suspension system.

Science.gov (United States)

Caffaro, Federica; Preti, Christian; Micheletti Cremasco, Margherita; Cavallo, Eugenio

2017-10-01

Agricultural and earth-moving machinery operators are particularly exposed to whole-body vibration (WBV), which has severe effects on health and affects comfort and performance. Few studies have investigated vibrational safety and comfort issues in telescopic handlers. These vehicles are widespread in many off-road applications-such as construction, agriculture, and mining-used to handle loads and to lift persons and equipment. This study investigated the effects of an active hydro-pneumatic cab-suspension system fitted to a telehandler on a driver's vibration exposure along the x-, y-, and z-axes, through both objective and subjective assessments. Sixteen healthy professional telehandler drivers took part in the study. Objective measurements were acquired at the operator's seat, and subjective ratings were taken while participants drove the telehandler with either a deactivated or activated suspension system at 12 kph on an ISO 5008 smooth track. The results showed that the activation of the cab-suspension system reduced the root-mean-square acceleration along the x- and z-axes (p =.038 and p =.000, respectively). Moreover, the frequency analysis showed a reduction in the acceleration along the z-axis in the range of 2-25 Hz (p suspension systems are discussed.

Spherical projections and liftings in geometric tomography

DEFF Research Database (Denmark)

Goodey, Paul; Kiderlen, Markus; Weil, Wolfgang

2011-01-01

We consider a variety of integral transforms arising in Geometric Tomography. It will be shown that these can be put into a common framework using spherical projection and lifting operators. These operators will be applied to support functions and surface area measures of convex bodies and to rad......We consider a variety of integral transforms arising in Geometric Tomography. It will be shown that these can be put into a common framework using spherical projection and lifting operators. These operators will be applied to support functions and surface area measures of convex bodies...... and to radial functions of star bodies. We then investigate averages of lifted projections and show that they correspond to self-adjoint intertwining operators. We obtain formulas for the eigenvalues of these operators and use them to ascertain circumstances under which tomographic measurements determine...... the original bodies. This approach via mean lifted projections leads us to some unexpected relationships between seemingly disparate geometric constructions....

Identification of Capacitive MEMS Accelerometer Structure Parameters for Human Body Dynamics Measurements

Directory of Open Access Journals (Sweden)

Vincas Benevicius

2013-08-01

Full Text Available Due to their small size, low weight, low cost and low energy consumption, MEMS accelerometers have achieved great commercial success in recent decades. The aim of this research work is to identify a MEMS accelerometer structure for human body dynamics measurements. Photogrammetry was used in order to measure possible maximum accelerations of human body parts and the bandwidth of the digital acceleration signal. As the primary structure the capacitive accelerometer configuration is chosen in such a way that sensing part measures on all three axes as it is 3D accelerometer and sensitivity on each axis is equal. Hill climbing optimization was used to find the structure parameters. Proof-mass displacements were simulated for all the acceleration range that was given by the optimization problem constraints. The final model was constructed in Comsol Multiphysics. Eigenfrequencies were calculated and model’s response was found, when vibration stand displacement data was fed into the model as the base excitation law. Model output comparison with experimental data was conducted for all excitation frequencies used during the experiments.

Project Finance: Basic Components

OpenAIRE

Alfieri Li Ojeda, Jaime

2015-01-01

The natural speed of the contemporary world demands large investment projects which require specialized financial techniques such as Project Finance, defined as a fund to finance investment projects of great magnitude. Every Project Finance involves a wide range of elements such as promoters, government, contractors andsuppliers, among others, that will ensure project success. La rapidez del mundo contemporáneo exige que los grandes proyectos de inversión requieran de técnicas financieras ...

Male Body Practices.

Science.gov (United States)

Lefkowich, Maya; Oliffe, John L; Hurd Clarke, Laura; Hannan-Leith, Madeline

2017-03-01

The pressure on boys and men to engage in extensive body practices (e.g., closely monitored eating and exercise habits) and achieve ideal male bodies has grown significantly over the past 20 years. Central to the depiction of ideal male bodies and body practices are both the pursuit and achievement of lean and well-defined muscles. The labels "pitches," "purchases," and "performativities" were inductively derived from the literature, and used to describe the multifaceted connections between masculinities, muscularity, and idealized male body practices. "Pitches" distil how popular culture posture norms of masculinity, and manly bodies and behaviors attainable and necessary. "Purchases" refer to men's diverse buy-in to dominant discourses about acceptable male bodies and practices. "Performativities" chronicle how men embody and navigate gender norms as they evaluate their own bodies, behaviors, and eating habits and those of their peers. Based on findings from the current scoping review, future research could benefit from fully linking masculinities with the drive for muscularity to address health and social risks associated with the pursuit of the idealized male body. In highlighting the plurality of masculinities and the complexity of men's diverse identities, health care providers can better reach and support men. Focusing on, and celebrating, a wider range of male bodies could help recenter dominant discourses about how and whose bodies and experiences are idealized. The current scoping review article offers an overview of how masculinities and muscularity have been linked to male body practices, and recommendations to advance this emergent field.

An overview of HyFIE Technical Research Project: cross testing in main European hypersonic wind tunnels on EXPERT body

OpenAIRE

Brazier , J.P.; Schramm , J.M.; Paris , S.; Gawehn , T.

2015-01-01

International audience; HyFIE project aimed at improving the measurement techniques in hypersonic wind-tunnels and comparing the experimental data provided by four major European facilities: DLR HEG and H2K, ONERA F4 and VKI Longshot. A common geometry of EXPERT body was chosen and four different models were used. A large amount of experimental data was collected and compared with the results of numerical simulations. Collapsing all the measured values showed a good agreement between the diff...

Analysis of bidirectional pattern synchrony of concentration-secretion pairs: implementation in the human testicular and adrenal axes.

Science.gov (United States)

Liu, Peter Y; Pincus, Steven M; Keenan, Daniel M; Roelfsema, Ferdinand; Veldhuis, Johannes D

2005-02-01

The hypothalamo-pituitary-testicular and hypothalamo-pituitary-adrenal axes are prototypical coupled neuroendocrine systems. In the present study, we contrasted in vivo linkages within and between these two axes using methods without linearity assumptions. We examined 11 young (21-31 yr) and 8 older (62-74 yr) men who underwent frequent (every 2.5 min) blood sampling overnight for paired measurement of LH and testosterone and 35 adults (17 women and 18 men; 26-77 yr old) who underwent adrenocorticotropic hormone (ACTH) and cortisol measurements every 10 min for 24 h. To mirror physiological interactions, hormone secretion was first deconvolved from serial concentrations with a waveform-independent biexponential elimination model. Feedforward synchrony, feedback synchrony, and the difference in feedforward-feedback synchrony were quantified by the cross-approximate entropy (X-ApEn) statistic. These were applied in a forward (LH concentration template, examining pattern recurrence in testosterone secretion), reverse (testosterone concentration template, examining pattern recurrence in LH secretion), and differential (forward minus reverse) manner, respectively. Analogous concentration-secretion X-ApEn estimates were calculated from ACTH-cortisol pairs. X-ApEn, a scale- and model-independent measure of pattern reproducibility, disclosed 1) greater testosterone-LH feedback coordination than LH-testosterone feedforward synchrony in healthy men and significant and symmetric erosion of both feedforward and feedback linkages with aging; 2) more synchronous ACTH concentration-dependent feedforward than feedback drive of cortisol secretion, independent of gender and age; and 3) enhanced detection of bidirectional physiological regulation by in vivo pairwise concentration-secretion compared with concentration-concentration analyses. The linking of relevant biological input to output signals and vice versa should be useful in the dissection of the reciprocal control of

Project financing

International Nuclear Information System (INIS)

Cowan, A.

1998-01-01

Project financing was defined ('where a lender to a specific project has recourse only to the cash flow and assets of that project for repayment and security respectively') and its attributes were described. Project financing was said to be particularly well suited to power, pipeline, mining, telecommunications, petro-chemicals, road construction, and oil and gas projects, i.e. large infrastructure projects that are difficult to fund on-balance sheet, where the risk profile of a project does not fit the corporation's risk appetite, or where higher leverage is required. Sources of project financing were identified. The need to analyze and mitigate risks, and being aware that lenders always take a conservative view and gravitate towards the lowest common denominator, were considered the key to success in obtaining project financing funds. TransAlta Corporation's project financing experiences were used to illustrate the potential of this source of financing

Body Image v kontextu soudobé společnosti

OpenAIRE

Rolínek, Igor

2008-01-01

The thesis focuses on body image - defines the main characteristics of this area, describes cultural influences and body image history and explains basic quantitative values (Body Mass Index, Waist Hip Ratio, Bioelectrical Impedance Analysis). Furthemore the thesis deals with media influence on body ideal formation process, especially in gay subculture. The research part explores recent situation of body image in gay subculture compared with heterosexual males. This section includes the conte...

IL-6 Impairs Myogenic Differentiation by Downmodulation of p90RSK/eEF2 and mTOR/p70S6K Axes, without Affecting AKT Activity

Directory of Open Access Journals (Sweden)

Michele Pelosi

2014-01-01

Full Text Available IL-6 is a multifaceted pleiotropic cytokine, which is produced by a variety of cell types and targets different cells and tissues. In physiological conditions, IL-6 can be locally and transiently produced by skeletal muscle and plays an important role in muscle homeostasis. Circulating IL-6 levels are normally very low or undetectable but are dramatically increased in several pathologic conditions. In this study, we aimed to define the potential molecular mechanisms underlying the effects of IL-6 on myogenic program. We explored the molecular mechanisms through which exogenous IL-6, or the conditioned medium from the murine C-26 adenocarcinoma cells (a cellular model that secretes high levels of IL-6 and induces cancer cachexia in mice, interferes with the myogenic program. Our study revealed that IL-6 induces the activation of the Stat3 signaling and promotes the downmodulation of the p90RSK/eEF2 and mTOR/p70S6K axes, while it does not affect the activation of AKT. We thus identified potential molecular mediators of the inhibitory effects of IL-6 on myogenic program.

MIV Project: Executive Summary

DEFF Research Database (Denmark)

Ravazzotti, Mariolina T.; Jørgensen, John Leif; Neefs, Marc

1997-01-01

Under the ESA contract #11453/95/NL/JG(SC), aiming at assessing the feasibility of Rendez-vous and docking of unmanned spacecrafts, a reference mission scenario was defined. This report gives an executive summary of the achievements and results from the project.......Under the ESA contract #11453/95/NL/JG(SC), aiming at assessing the feasibility of Rendez-vous and docking of unmanned spacecrafts, a reference mission scenario was defined. This report gives an executive summary of the achievements and results from the project....

Body dysmorphic disorder

DEFF Research Database (Denmark)

Jawad, Mustafa Bashir M; Sjögren, Magnus

2017-01-01

Body dysmorphic disorder is defined by a preoccupation of one or more non-existent or slight defects or flaws in the physical appearance. The prevalence is 1.7-2.4% in the general population with a higher incidence rate in women. The rate of suicidal ideation is as high as 80%, and up to 25...

An improved contour symmetry axes extraction algorithm and its application in the location of picking points of apples

Energy Technology Data Exchange (ETDEWEB)

Wang, D.; Song, H.; Yu, X.; Zhang, W.; Qu, W.; Xu, Y.

2015-07-01

The key problem for picking robots is to locate the picking points of fruit. A method based on the moment of inertia and symmetry of apples is proposed in this paper to locate the picking points of apples. Image pre-processing procedures, which are crucial to improving the accuracy of the location, were carried out to remove noise and smooth the edges of apples. The moment of inertia method has the disadvantage of high computational complexity, which should be solved, so convex hull was used to improve this problem. To verify the validity of this algorithm, a test was conducted using four types of apple images containing 107 apple targets. These images were single and unblocked apple images, single and blocked apple images, images containing adjacent apples, and apples in panoramas. The root mean square error values of these four types of apple images were 6.3, 15.0, 21.6 and 18.4, respectively, and the average location errors were 4.9°, 10.2°, 16.3° and 13.8°, respectively. Furthermore, the improved algorithm was effective in terms of average runtime, with 3.7 ms and 9.2 ms for single and unblocked and single and blocked apple images, respectively. For the other two types of apple images, the runtime was determined by the number of apples and blocked apples contained in the images. The results showed that the improved algorithm could extract symmetry axes and locate the picking points of apples more efficiently. In conclusion, the improved algorithm is feasible for extracting symmetry axes and locating the picking points of apples. (Author)

Universality in low energy three-body systems

International Nuclear Information System (INIS)

Amorim, A.E.A.; Tomio, L; Frederico, T.

1997-01-01

The renormalizability of the quantum theory of non-relativistic three-body system with zero range interaction, warranties that all the low-energy three-body properties are well defined and the low-energy two-body and only one three-body physical information are known. Considering this observation, we have shown that the conditions for the occurrence of Efimov states can be easily reached with any model of short range potential where the three-body ground state and the corresponding binding energy of the subsystems are kept fixed. This approach was applied to the recently discovered halo nuclei. (author)

Project Management Plan for the Isotopes Facilities Deactivation Project at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

1995-04-01

The purpose of the Isotopes Facilities Deactivation Project (IFDP) is to place former isotopes production facilities at the Oak Ridge National Laboratory in a safe, stable, and environmentally sound condition suitable for an extended period of minimum surveillance and maintenance (S ampersand M) and as quickly and economically as possible. Implementation and completion of the deactivation project will further reduce the already small risks to the environment and to public safety and health. Furthermore, the project should result in significant S ampersand M cost savings in the future. The IFDP management plan has been prepared to document the project objectives, define organizational relationships and responsibilities, and outline the management control systems to be employed in the management of the project. The project has adopted a strategy to deactivate the simple facilities first, to reduce the scope of the project, and to gain experience before addressing more difficult facilities. A decision support system is being developed to identify those activities, that best promote the project mission and result in largest cost savings. The Work Plan for the Isotopes Facilities Deactivation Project at Oak Ridge National Laboratory (Energy Systems 1994) defines the project schedule, the cost estimate, and the technical approach for the project

Kimberley rock art dating project

International Nuclear Information System (INIS)

Walsh, G.L.; Morwood, M.

1997-01-01

The art's additional value, unequalled by traditionally recognised artefacts, is its permanent pictorial documentation presenting a 'window' into the otherwise intangible elements of perceptions, vision and mind of pre-historic cultures. Unfortunately it's potential in establishing Kimberley archaeological 'big picture' still remains largely unrecognised. Some of findings of the Kimberley Rock Art Dating Project, using AMS and optical stimulated luminescence (OSL) dating techniques, are outlined. It is estimated that these findings will encourage involvement by a greater diversity of specialist disciplines to tie findings into levels of this art sequence as a primary reference point. The sequence represents a sound basis for selecting specific defined images for targeting detailed studies by a range of dating technique. This effectively removes the undesirable ad hoc sampling of 'apparently old paintings'; a process which must unavoidably remain the case with researchers working on most global bodies of rock art

Non-Profit/Higher Education Project Management Series: The Project Plan

Science.gov (United States)

Burgher, Karl E.; Snyder, Michael

2012-01-01

This is the second installment of the AACRAO management series focusing on project management in the academy. In this article, the authors focus on white papers (often called charters, briefs, or fact sheets) and their partner, the work plan. The work plan is a detailed document that defines each aspect of a project. It is often preceded by a…

DISCO interacting protein 2 determines direction of axon projection under the regulation of c-Jun N-terminal kinase in the Drosophila mushroom body

International Nuclear Information System (INIS)

Nitta, Yohei; Sugie, Atsushi

2017-01-01

Precisely controlled axon guidance for complex neuronal wiring is essential for appropriate neuronal function. c-Jun N-terminal kinase (JNK) was found to play a role in axon guidance recently as well as in cell proliferation, protection and apoptosis. In spite of many genetic and molecular studies on these biological processes regulated by JNK, how JNK regulates axon guidance accurately has not been fully explained thus far. To address this question, we use the Drosophila mushroom body (MB) as a model since the α/β axons project in two distinct directions. Here we show that DISCO interacting protein 2 (DIP2) is required for the accurate direction of axonal guidance. DIP2 expression is under the regulation of Basket (Bsk), the Drosophila homologue of JNK. We additionally found that the Bsk/DIP2 pathway is independent from the AP-1 transcriptional factor complex pathway, which is directly activated by Bsk. In conclusion, our findings revealed DIP2 as a novel effector downstream of Bsk modulating the direction of axon projection. - Highlights: • DIP2 is required for accurate direction of axon guidance in Drosophila mushroom body. • DIP2 is a downstream of JNK in the axon guidance of Drosophila mushroom body neuron. • JNK/DIP2 pathway is independent from JNK/AP-1 transcriptional factor complex pathway.

Visuomotor mental rotation: the reaction time advantage for anti-pointing is not influenced by perceptual experience with the cardinal axes.

Science.gov (United States)

Neely, Kristina A; Heath, Matthew

2010-03-01

In the visuomotor mental rotation (VMR) paradigm, participants execute a center-out reaching movement to a location that deviates from a visual cue by a predetermined instruction angle. Previous work has demonstrated a linear increase in reaction time (RT) as a function of the amplitude of the instruction angle (Georgopoulos and Massey in Exp Brain Res 65:361-370, 1987). In contrast, we recently reported a RT advantage for an instruction angle of 180 degrees relative to a 90 degrees angle (Neely and Heath in Neurosci Lett 463:194-198, 2009). It is possible, however, that perceptual expertise with the cardinal axes, which are perceptually familiar reference frames, influenced the results of our previous investigation. To address this issue, we employed a VMR paradigm identical to that of our previous work, with the exception that the stimulus array was shifted 45 degrees from the horizontal and vertical meridians. Our results demonstrated that RTs were fastest and least variable when the instruction angle was 0 degrees, followed by 180 degrees, which in turn, was faster than 90 degrees. Such findings establish that the RT advantage for the 180 degrees instruction angle is not influenced by perceptual expertise with the cardinal axes. Moreover, the present results provide convergent evidence that RT is not determined by the angle of rotation; instead, they indicate that response latencies reflect computational differences in the complexity of response remapping.

Psychosocial differences associated with body weight among female adolescents: the importance of body image.

Science.gov (United States)

Pesa, J A; Syre, T R; Jones, E

2000-05-01

To determine whether overweight female adolescents differ from normal and underweight female adolescents with respect to a set of psychosocial factors, while controlling for body image. Female participants of the National Longitudinal Study of Adolescent Health (n = 3197) were selected for analysis. Multivariate Analysis of Variance (MANOVA) was used to test whether overweight subjects differed from normal and underweight subjects with respect to measures of depression, self-esteem, trouble in school, school connectedness, family connectedness, sense of community, autonomy, protective factors, and grades. Stepdown F-tests and discriminant function coefficients provided information regarding the strength of specific factors in contributing to overall differences. MANOVA revealed significant differences between groups on the combined set of psychosocial factors. Self-esteem defined the difference in a positive direction while grades defined the difference inversely. When controlling for body image, multidimensional group differences were still evident; however, self-esteem was no longer a significant contributing variable. While overweight female adolescents seem to suffer from low self-esteem, it may be explained by body image. Efforts should be directed toward encouraging and supporting healthy eating patterns and physical activity while encouraging students to recognize personal strengths not related to physique.

Producing Distant Planets by Mutual Scattering of Planetary Embryos

Science.gov (United States)

Silsbee, Kedron; Tremaine, Scott

2018-02-01

It is likely that multiple bodies with masses between those of Mars and Earth (“planetary embryos”) formed in the outer planetesimal disk of the solar system. Some of these were likely scattered by the giant planets into orbits with semimajor axes of hundreds of au. Mutual torques between these embryos may lift the perihelia of some of them beyond the orbit of Neptune, where they are no longer perturbed by the giant planets, so their semimajor axes are frozen in place. We conduct N-body simulations of this process and its effect on smaller planetesimals in the region of the giant planets and the Kuiper Belt. We find that (i) there is a significant possibility that one sub-Earth mass embryo, or possibly more, is still present in the outer solar system; (ii) the orbit of the surviving embryo(s) typically has perihelion of 40–70 au, semimajor axis less than 200 au, and inclination less than 30° (iii) it is likely that any surviving embryos could be detected by current or planned optical surveys or have a significant effect on solar system ephemerides; (iv) whether or not an embryo has survived to the present day, its dynamical influence earlier in the history of the solar system can explain the properties of the detached disk (defined in this paper as containing objects with perihelia >38 au and semimajor axes between 80 and 500 au).

Project Bibliographies: Tracking the Expansion of Knowledge Using JPL Project Publications

Science.gov (United States)

Coppin, Ann

2016-01-01

The Jet Propulsion Laboratory (JPL) Library defines a project bibliography as a bibliography of publicly available publications relating to a specific JPL instrument or mission. These bibliographies may be used to share information between distant project team members, as part of the required Education and Public Outreach effort, or as part of…

Estimating the scale of stone axe production: A case study from Onega Lake, Russian Karelia

Directory of Open Access Journals (Sweden)

Alexey Tarasov

2014-03-01

Full Text Available The industry of metatuff axes and adzes on the western coast of Onega Lake (Eneolithic period, ca. 3500 – 1500 cal. BC allows assuming some sort of craft specialization. Excavations of a workshop site Fofanovo XIII, conducted in 2010-2011, provided an extremely large assemblage of artefacts (over 350000 finds from just 30 m2, mostly production debitage. An attempt to estimate the output of production within the excavated area is based on experimental data from a series of replication experiments. Mass-analysis with the aid of image recognition software was used to obtain raw data from flakes from excavations and experiments. Statistical evaluation assures that the experimental results can be used as a basement for calculations. According to the proposed estimation, some 500 – 1000 tools could have been produced here, and this can be qualified as an evidence of “mass-production”.

32 CFR 644.495 - Donation to a public body.

Science.gov (United States)

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Donation to a public body. 644.495 Section 644.495 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL... Land) § 644.495 Donation to a public body. A public body, as defined by GSA for this purpose, means any...

Body image disturbance in adults treated for cancer - a concept analysis.

Science.gov (United States)

Rhoten, Bethany A

2016-05-01

To report an analysis of the concept of body image disturbance in adults who have been treated for cancer as a phenomenon of interest to nurses. Although the concept of body image disturbance has been clearly defined in adolescents and adults with eating disorders, adults who have been treated for cancer may also experience body image disturbance. In this context, the concept of body image disturbance has not been clearly defined. Concept analysis. PubMed, Psychological Information Database and Cumulative Index of Nursing and Allied Health Literature were searched for publications from 1937 - 2015. Search terms included body image, cancer, body image disturbance, adult and concept analysis. Walker and Avant's 8-step method of concept analysis was used. The defining attributes of body image disturbance in adults who have been treated for cancer are: (1) self-perception of a change in appearance and displeasure with the change or perceived change in appearance; (2) decline in an area of function; and (3) psychological distress regarding changes in appearance and/or function. This concept analysis provides a foundation for the development of multidimensional assessment tools and interventions to alleviate body image disturbance in this population. A better understanding of body image disturbance in adults treated for cancer will assist nurses and other clinicians in identifying this phenomenon and nurse scientists in developing instruments that accurately measure this condition, along with interventions that will promote a better quality of life for survivors. © 2016 John Wiley & Sons Ltd.

Noninvasive Body Contouring: A Male Perspective.

Science.gov (United States)

Wat, Heidi; Wu, Douglas C; Goldman, Mitchel P

2018-01-01

Noninvasive body contouring is an attractive therapeutic modality to enhance the ideal male physique. Men place higher value on enhancing a well-defined, strong, masculine jawline and developing a V-shaped taper through the upper body. An understanding of the body contour men strive for allows the treating physician to focus on areas that are of most concern to men, thus enhancing patient experience and satisfaction. This article discusses noninvasive body contouring techniques, taking into account the unique aesthetic concerns of the male patient by combining an analysis of the existing literature with our own clinical experience. Copyright © 2017 Elsevier Inc. All rights reserved.

Intracellular ice and cell survival in cryo-exposed embryonic axes of recalcitrant seeds of Acer saccharinum: an ultrastructural study of factors affecting cell and ice structures.

Science.gov (United States)

Wesley-Smith, James; Berjak, Patricia; Pammenter, N W; Walters, Christina

2014-03-01

Cryopreservation is the only long-term conservation strategy available for germplasm of recalcitrant-seeded species. Efforts to cryopreserve this form of germplasm are hampered by potentially lethal intracellular freezing events; thus, it is important to understand the relationships among cryo-exposure techniques, water content, structure and survival. Undried embryonic axes of Acer saccharinum and those rapidly dried to two different water contents were cooled at three rates and re-warmed at two rates. Ultrastructural observations were carried out on radicle and shoot tips prepared by freeze-fracture and freeze-substitution to assess immediate (i.e. pre-thaw) responses to cooling treatments. Survival of axes was assessed in vitro. Intracellular ice formation was not necessarily lethal. Embryo cells survived when crystal diameter was between 0·2 and 0·4 µm and fewer than 20 crystals were distributed per μm(2) in the cytoplasm. Ice was not uniformly distributed within the cells. In fully hydrated axes cooled at an intermediate rate, the interiors of many organelles were apparently ice-free; this may have prevented the disruption of vital intracellular machinery. Intracytoplasmic ice formation did not apparently impact the integrity of the plasmalemma. The maximum number of ice crystals was far greater in shoot apices, which were more sensitive than radicles to cryo-exposure. The findings challenge the accepted paradigm that intracellular ice formation is always lethal, as the results show that cells can survive intracellular ice if crystals are small and localized in the cytoplasm. Further understanding of the interactions among water content, cooling rate, cell structure and ice structure is required to optimize cryopreservation treatments without undue reliance on empirical approaches.

Definably compact groups definable in real closed fields.II

OpenAIRE

Barriga, Eliana

2017-01-01

We continue the analysis of definably compact groups definable in a real closed field $\\mathcal{R}$. In [3], we proved that for every definably compact definably connected semialgebraic group $G$ over $\\mathcal{R}$ there are a connected $R$-algebraic group $H$, a definable injective map $\\phi$ from a generic definable neighborhood of the identity of $G$ into the group $H\\left(R\\right)$ of $R$-points of $H$ such that $\\phi$ acts as a group homomorphism inside its domain. The above result and o...

Mass-Inertial Characteristics and Dimensionless Equations of Two-bearing Rotor Motion with Auto-balancer in Terms of Compensating Body Mass

Directory of Open Access Journals (Sweden)

A. N. Gorbenko

2015-01-01

Full Text Available Modern rotary machines use auto-balancing devices of passive type to provide automatic balancing of rotors and reduce vibration. Most available researches on the rotor auto-balancing dynamics and stability are based on the assumption that the compensating bodies of the autobalancer, as well as the rotor imbalance, are infinitesimal values. The literature review has shown that the problems concerning the automatic balancing of rotor with its three-dimensional motion are solved approximately and require an in-depth analysis taking into consideration the final mass of the compensating bodies.The paper analyses the effect of an auto-balancer mass on the mass-inertial properties of the three-dimensional rotor motion. It gives the autonomous equations of the system motion. The work shows that attaching the point masses of compensating auto-balancer bodies and imbalance to the rotor causes an increase, however non-identical, in all components of the total inertia tensor of the mechanical system. This leads to a qualitative change in mass-inertial characteristics of the system.The composite rotor becomes an inertia anisotropic body in which the inertia moments about the two transverse own axes are not equal to each other. The rotor anisotropy results in complicated dynamic behavior of the gyroscopic rotor. In this case, the additional critical rotor speeds and the zones of instability of motion may occur.It is shown that in the case of using multi-body auto-balancer the inertial parameters of the rotor system grow into the interval values, i.e. their values are not uniquely determined and may be equal to a variety values from a certain range. Thus, the degree of inertial anisotropy and other auto-balancing parameters are the interval values as well in this case.The system of dimensionless equations of rotary machine motion, which contains the minimum required number of dimensionless parameters, has been obtained. The specific ranges of the dimensionless

Bioelectrical impedance analysis to define an excess of body fat: evaluation in patients with psoriasis.

Science.gov (United States)

Galluzzo, M; Talamonti, M; Perino, F; Servoli, S; Giordano, D; Chimenti, S; De Simone, C; Peris, K

2017-06-01

There is strong evidence that obesity is closely associated with psoriasis. However, data on body composition are lacking in psoriasis. The purpose of this study were to investigate the body composition in psoriasis patients using bioelectrical impedance analysis and to correlate the bioelectrical impedance data with disease severity and laboratory parameters. Anthropometric measurements and bioelectrical impedance analyses were performed on patients with psoriasis, naïve to any systemic treatment, who attended the outpatient clinics of two University centers. Data of 164 adult patients were analyzed. Compared to men, women had several significantly higher bioelectrical impedance parameters including reactance, fat mass% and adipose tissue%. The values of adipose tissue were positively correlated only with patients age (p = .021) and age at disease onset (p = .0006), but not with disease severity. In addition, we observed that the use of BMI cutoffs allowed to categorize 36.7% of women and 19.2% of men as obese, while fat mass% showed that 53.3% of women and 48.1% of men were obese. In our study, psoriasis is been associated with a high fat mass%. We suggest that screening for body fat distribution in psoriatic patients might be useful to identify early obesity-related disease.

Statistical Techniques for Project Control

CERN Document Server

Badiru, Adedeji B

2012-01-01

A project can be simple or complex. In each case, proven project management processes must be followed. In all cases of project management implementation, control must be exercised in order to assure that project objectives are achieved. Statistical Techniques for Project Control seamlessly integrates qualitative and quantitative tools and techniques for project control. It fills the void that exists in the application of statistical techniques to project control. The book begins by defining the fundamentals of project management then explores how to temper quantitative analysis with qualitati

Exploring point-cloud features from partial body views for gender classification

Science.gov (United States)

Fouts, Aaron; McCoppin, Ryan; Rizki, Mateen; Tamburino, Louis; Mendoza-Schrock, Olga

2012-06-01

In this paper we extend a previous exploration of histogram features extracted from 3D point cloud images of human subjects for gender discrimination. Feature extraction used a collection of concentric cylinders to define volumes for counting 3D points. The histogram features are characterized by a rotational axis and a selected set of volumes derived from the concentric cylinders. The point cloud images are drawn from the CAESAR anthropometric database provided by the Air Force Research Laboratory (AFRL) Human Effectiveness Directorate and SAE International. This database contains approximately 4400 high resolution LIDAR whole body scans of carefully posed human subjects. Success from our previous investigation was based on extracting features from full body coverage which required integration of multiple camera images. With the full body coverage, the central vertical body axis and orientation are readily obtainable; however, this is not the case with a one camera view providing less than one half body coverage. Assuming that the subjects are upright, we need to determine or estimate the position of the vertical axis and the orientation of the body about this axis relative to the camera. In past experiments the vertical axis was located through the center of mass of torso points projected on the ground plane and the body orientation derived using principle component analysis. In a natural extension of our previous work to partial body views, the absence of rotational invariance about the cylindrical axis greatly increases the difficulty for gender classification. Even the problem of estimating the axis is no longer simple. We describe some simple feasibility experiments that use partial image histograms. Here, the cylindrical axis is assumed to be known. We also discuss experiments with full body images that explore the sensitivity of classification accuracy relative to displacements of the cylindrical axis. Our initial results provide the basis for further

Outlining the shadow of the axe

DEFF Research Database (Denmark)

Holtermann, Jakob von Holderstein

2009-01-01

Most proponents of restorative justice admit to the need to find a well defined place for the use of traditional trial and punishment alongside restorative justice processes. Concrete answers have, however, been wanting more often than not. John Braithwaite is arguably the one who has come...... the closest, and here I systematically reconstruct and critically discuss the rules or principles suggested by him for referring cases back and forth between restorative justice and traditional trial and punishment. I show that we should be sceptical about at least some of the answers provided by Braithwaite......, and, thus, that the necessary use of traditional punishment continues to pose a serious challenge to restorative justice, even at its current theoretical best...

Parametrized post-Newtonian theory of reference frames, multipolar expansions and equations of motion in the N-body problem

International Nuclear Information System (INIS)

Kopeikin, Sergei; Vlasov, Igor

2004-01-01

along with the law of relativistic precession of its spatial axes. These transformations depend on the PPN parameters β and γ, generalize general relativistic transformations of the IAU 2000 resolutions, and should be used in the data processing of the solar system gravitational experiments aimed to detect the presence of the scalar field. These PPN transformations are also applicable in the precise time-keeping metrology, celestial mechanics, astrometry, geodesy and navigation.We consider a multipolar post-Newtonian expansion of the gravitational and scalar fields and construct a set of internal and external gravitational multipoles depending on the parameters β and γ. These PPN multipoles generalize the Thorne-Blanchet-Damour multipoles defined in harmonic coordinates of general theory of relativity. The PPN multipoles of the scalar-tensor theory of gravity are split in three classes-active, conformal, and scalar multipoles. Only two of them are algebraically independent and we chose to work with the conformal and active multipoles. We derive the laws of conservations of the multipole moments and show that they must be formulated in terms of the conformal multipoles. We focus then on the law of conservation of body's linear momentum which is defined as a time derivative of the conformal dipole moment of the body in the local coordinates. We prove that the local force violating the law of conservation of the body's linear momentum depends exclusively on the active multipole moments of the body along with a few other terms which depend on the internal structure of the body and are responsible for the violation of the strong principle of equivalence (the Nordtvedt effect).The PPN translational equations of motion of extended bodies in the global coordinate frame and with all gravitational multipoles taken into account are derived from the law of conservation of the body's linear momentum supplemented by the law of motion of the origin of the local frame derived from

On the Long-Term "Hesitation Waltz" Between the Earth's Figure and Rotation Axes

Science.gov (United States)

Couhert, A.; Mercier, F.; Bizouard, C.

2017-12-01

The principal figure axis of the Earth refers to its axis of maximum inertia. In the absence of external torques, the latter should closely coincide with the rotation pole, when averaged over many years. However, because of tidal and non-tidal mass redistributions within the Earth system, the rotational axis executes a circular motion around the figure axis essentially at seasonal time scales. In between, it is not clear what happens at decadal time spans and how well the two axes are aligned. The long record of accurate Satellite Laser Ranging (SLR) observations to Lageos makes possible to directly measure the long time displacement of the figure axis with respect to the crust, through the determination of the degree 2 order 1 geopotential coefficients for the 34-year period 1983-2017. On the other hand, the pole coordinate time series (mainly from GNSS and VLBI data) yield the motion of the rotation pole with even a greater accuracy. This study is focused on the analysis of the long-term behavior of the two time series, as well as the derivation of possible explanations for their discrepancies.

Principal Component Analysis of Body Measurements In Three ...

African Journals Online (AJOL)

This study was conducted to explore the relationship among body measurements in 3 strains of broilers chicken (Arbor Acre, Marshal and Ross) using principal component analysis with the view of identifying those components that define body conformation in broilers. A total of 180 birds were used, 60 per strain.

Notes on projective structures and Kleinian groups

International Nuclear Information System (INIS)

Matsuzaki, K.; Velling, J.A.

1992-11-01

From the three classes of projective structures defined on an arbitrary hyperbolic Riemann surface, namely bounded discrete projective structures, bounded Kleinian projective structures and bounded covering projective structures, the last one is discussed in this paper. 21 refs, 2 figs

Kinect Who’s Coming - Applying Kinect to Human Body Height Measurement to Improve Character Recognition Performance

Directory of Open Access Journals (Sweden)

Hau-Wei Lee

2015-05-01

Full Text Available A great deal of relevant research on character recognition has been carried out, but a certain amount of time is needed to compare faces from a large database. The Kinect is able to obtain three-dimensional coordinates for an object (x & y axes and depth, and in recent years research on its applications has expanded from use in gaming to that of image measurement. This study uses Kinect skeleton information to conduct body height measurements with the aim of improving character recognition performance. Time spent searching and comparing characters is reduced by creating height categories. The margin of error for height used in this investigation was ± 5 cm; therefore, face comparisons were only executed for people in the database within ±5 cm of the body height measured, reducing the search time needed. In addition, using height and facial features simultaneously to conduct character recognition can also reduce the frequency of mistaken recognition. The Kinect was placed on a rotary stage and the position of the head on the body frame was used to conduct body tracking. Body tracking can be used to reduce image distortion caused by the lens of the Kinect. EmguCV was used for image processing and character recognition. The methods proposed in this study can be used in public safety, student attendance registration, commercial VIP recognition and many others.

Origin of the vertebrate body plan via mechanically biased conservation of regular geometrical patterns in the structure of the blastula.

Science.gov (United States)

Edelman, David B; McMenamin, Mark; Sheesley, Peter; Pivar, Stuart

2016-09-01

We present a plausible account of the origin of the archetypal vertebrate bauplan. We offer a theoretical reconstruction of the geometrically regular structure of the blastula resulting from the sequential subdivision of the egg, followed by mechanical deformations of the blastula in subsequent stages of gastrulation. We suggest that the formation of the vertebrate bauplan during development, as well as fixation of its variants over the course of evolution, have been constrained and guided by global mechanical biases. Arguably, the role of such biases in directing morphology-though all but neglected in previous accounts of both development and macroevolution-is critical to any substantive explanation for the origin of the archetypal vertebrate bauplan. We surmise that the blastula inherently preserves the underlying geometry of the cuboidal array of eight cells produced by the first three cleavages that ultimately define the medial-lateral, dorsal-ventral, and anterior-posterior axes of the future body plan. Through graphical depictions, we demonstrate the formation of principal structures of the vertebrate body via mechanical deformation of predictable geometrical patterns during gastrulation. The descriptive rigor of our model is supported through comparisons with previous characterizations of the embryonic and adult vertebrate bauplane. Though speculative, the model addresses the poignant absence in the literature of any plausible account of the origin of vertebrate morphology. A robust solution to the problem of morphogenesis-currently an elusive goal-will only emerge from consideration of both top-down (e.g., the mechanical constraints and geometric properties considered here) and bottom-up (e.g., molecular and mechano-chemical) influences. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Orthogonality Measurement for Homogenous Projects-Bases

Science.gov (United States)

Ivan, Ion; Sandu, Andrei; Popa, Marius

2009-01-01

The homogenous projects-base concept is defined. Next, the necessary steps to create a homogenous projects-base are presented. A metric system is built, which then will be used for analyzing projects. The indicators which are meaningful for analyzing a homogenous projects-base are selected. The given hypothesis is experimentally verified. The…

Project brief of pre-contract in project management

International Nuclear Information System (INIS)

Mohd Jamil Hashim; Mohd Azmi Sidid Omar; Abdul Rahman Norazumin; Zakaria Dris; Abdul Murad Abu Bakar; Alwi Othman

2010-01-01

Project brief is a comprehensive document used in translating the user needs and requirement for the project implementation. This document is important for the designer as a main guidance towards establishing project details. Research shown that problem usually arises from not well-defined scope and needs by the user. With lack of information the designer tend to assume and interprets wrong translation. Other issues arise from project management are time, cost, budgetary, lack of communication and establishing quality management. Some ideas of improvement were gain by doing cross reference with JKR quality system management, workshop and brainstorming. It shows that an improvement of data collection system has to be integrating with some basic format details, drawings and declaration forms to be established. (author)

Project management as a competitive advantage for the internationalization of Brazilian companies

Directory of Open Access Journals (Sweden)

Andre Luiz Spinelli Schelini

2017-12-01

Full Text Available This study focuses on three theoretical axes: project management (PM, internationalization of companies and the resource-based view (RBV. It aimed to analyze if, and in what way, PM maturity contributes to the international strategy of Brazilian companies from the RBV perspective. The research strategy adopted in three Brazilian companies constituted a multiple case study with a descriptive exploratory approach through intercase and intracase analysis. As an unprecedented result, the study identified five characteristics of mature project management: project sustainability, stakeholder engagement, goal setting and strategy, change management, and risk management. Furthermore, all of these contributed to the internationalization of the companies in question, with an impact on competitive advantage, considering the RBV-VRIO analysis. Thus, the study contributes to the field by aiding companies that are beginning or intend to begin internationalization processes, enabling them to obtain better results through PM. A limitation of the study is the small number of cases investigated, which may be viewed as an opportunity for conducting further studies.

Body Image and Westernization Trends among Japanese Adolescents

Science.gov (United States)

Nielson, Hailey E.; Reel, Justine J.; Galli, Nick A.; Crookston, Benjamin T.; Miyairi, Maya

2013-01-01

Background and Aims: The purpose of this project was to examine body dissatisfaction and the degree of acculturation to Western media body ideals among Japanese adolescents. Furthermore, sex differences in body esteem were examined between male and female participants. Methods: Male and female participants (N=158) aged 15 to 18 years in Okinawa,…

Design and performance of axes controller for the 50/80 cm ARIES Schmidt telescope

Science.gov (United States)

Kumar, T. S.; Banwar, R. N.

We describe here the details of R.A. and Dec axes controller for the 50/80 cm Schmidt telescope at Aryabhatta Research Institute of observational sciencES (ARIES). Each axis is driven by a set of two motors for backlash-free motion and is coupled to on-shaft encoder for absolute position measurements. Additional incremental encoders are provided though a backlash-free reduction for velocity feedback. A pulse width modulation (PWM) based proportional and integral (PI) controller is designed to drive the twin-motor drive of each axis. The overall telescope control architecture features a distributed network of simple low cost PIC microcontrollers interfaced via CAN bus and RS232 ports. Using this controller it has been observed that the rms velocity errors at slew, set, guide, fine and tracking speeds are negligible. Excessive preload on the gearbox bearings results in a highly nonlinear behavior at fine speeds owing to dynamics of friction. We found that the peak errors in the tracking performance and fine speeds can be improved by properly adjusting the preloads on the gearbox bearings.

Management of Service Projects in Support of Space Flight Research

Science.gov (United States)

Love, J.

2009-01-01

Goal:To provide human health and performance countermeasures, knowledge, technologies, and tools to enable safe, reliable, and productive human space exploration . [HRP-47051] Specific Objectives: 1) Develop capabilities, necessary countermeasures, and technologies in support of human space exploration, focusing on mitigating the highest risks to human health and performance. 2) Define and improve human spaceflight medical, environmental, and human factors standards. 3) Develop technologies that serve to reduce medical and environmental risks, to reduce human systems resource requirements (mass, volume, power, data, etc.) and to ensure effective human-system integration across exploration systems. 4) Ensure maintenance of Agency core competencies necessary to enable risk reduction in the following areas: A. Space medicine B. Physiological and behavioral effects of long duration spaceflight on the human body C. Space environmental effects, including radiation, on human health and performance D. Space "human factors" [HRP-47051]. Service projects can form integral parts of research-based project-focused programs to provide specialized functions. Traditional/classic project management methodologies and agile approaches are not mutually exclusive paradigms. Agile strategies can be combined with traditional methods and applied in the management of service projects functioning in changing environments. Creative collaborations afford a mechanism for mitigation of constrained resource limitations.

A new telescope control system for the Telescopio Nazionale Galileo II: azimuth and elevation axes

Science.gov (United States)

Ghedina, Adriano; Gonzalez, Manuel; Pérez Ventura, Héctor; Riverol Rodríguez, A. Luis

2016-07-01

TNG is a 4m class active optics telescope at the Observatory of Roque de Los Muchachos. In the framework of keeping optimum performances during observation and continuous reliability the telescope control system (TCS) of the TNG is going through a deep upgrade after nearly 20 years of service. The original glass encoders and bulb lamp heads are substituted with modern steel scale drums and scanning units. The obsolete electronic racks and computers for the control loops are replaced with modern and compact commercial drivers with a net improvement in the motors torque ripple. In order to minimize the impact on the number of nights lost during the mechanical and electronic changes in the TCS the new TCS is developed and tested in parallel to the existing one and three steps will be taken to achieve the full upgrade. We describe here the second step that affected the main axes of the telescope, AZ and EL.

Lower core body temperature and greater body fat are components of a human thrifty phenotype.

Science.gov (United States)

Reinhardt, M; Schlögl, M; Bonfiglio, S; Votruba, S B; Krakoff, J; Thearle, M S

2016-05-01

In small studies, a thrifty human phenotype, defined by a greater 24-hour energy expenditure (EE) decrease with fasting, is associated with less weight loss during caloric restriction. In rodents, models of diet-induced obesity often have a phenotype including a reduced EE and decreased core body temperature. We assessed whether a thrifty human phenotype associates with differences in core body temperature or body composition. Data for this cross-sectional analysis were obtained from 77 individuals participating in one of two normal physiology studies while housed on our clinical research unit. Twenty-four-hour EE using a whole-room indirect calorimeter and 24-h core body temperature were measured during 24 h each of fasting and 200% overfeeding with a diet consisting of 50% carbohydrates, 20% protein and 30% fat. Body composition was measured by dual X-ray absorptiometry. To account for the effects of body size on EE, changes in EE were expressed as a percentage change from 24-hour EE (%EE) during energy balance. A greater %EE decrease with fasting correlated with a smaller %EE increase with overfeeding (r=0.27, P=0.02). The %EE decrease with fasting was associated with both fat mass and abdominal fat mass, even after accounting for covariates (β=-0.16 (95% CI: -0.26, -0.06) %EE per kg fat mass, P=0.003; β=-0.0004 (-0.0007, -0.00004) %EE kg(-1) abdominal fat mass, P=0.03). In men, a greater %EE decrease in response to fasting was associated with a lower 24- h core body temperature, even after adjusting for covariates (β=1.43 (0.72, 2.15) %EE per 0.1 °C, P=0.0003). Thrifty individuals, as defined by a larger EE decrease with fasting, were more likely to have greater overall and abdominal adiposity as well as lower core body temperature consistent with a more efficient metabolism.

Defining care products to finance health care in the Netherlands

NARCIS (Netherlands)

M. Westerdijk (MacHiel); J.J. Zuurbier (Joost); M. Ludwig (Martijn); S. Prins (Sarah)

2012-01-01

textabstractA case-mix project started in the Netherlands with the primary goal to define a complete set of health care products for hospitals. The definition of the product structure was completed 4 years later. The results are currently being used for billing purposes. This paper focuses on the

Should body image programs be inclusive? A focus group study of college students.

Science.gov (United States)

Ciao, Anna C; Ohls, Olivia C; Pringle, Kevin D

2018-01-01

Most evidence-based body image programs for college students (e.g., the Body Project) are designed for female-only audiences, although body dissatisfaction is not limited to female-identified individuals. Furthermore, programs do not explicitly discuss diversity, although individuals with marginalized gender, racial, and sexual identities may be particularly vulnerable to body image disturbances. Making programs more inclusive may increase their disseminability. This qualitative study examined the feasibility of adapting the Body Project for universal and inclusive use with college students. Participants (N = 36; M age = 21.66 years; 73% female-identified; 20% sexual minority; 23% racial minority) attended one of five semi-structured focus groups to explore the inclusivity of appearance-based cultural norms using adapted Body Project activities and discuss the feasibility of universal and inclusive interventions. Inductive qualitative content analysis with three-rater consensus identified focus group themes. There was consensus that inclusive interventions could have a positive impact (broadening perspectives, normalizing body image concerns, increasing awareness) despite potential barriers (poor diversity representation, vulnerability). There was strong consensus regarding advice for facilitating inclusive interventions (e.g., skilled facilitation, education, increasing diversity). Results suggest that inclusive body image programs are desirable and provide a framework for creating the EVERYbody Project, a program for more universal audiences. © 2017 Wiley Periodicals, Inc.

Decoupling the Wrist: A Cadaveric Experiment Examining Wrist Kinematics Following Midcarpal Fusion and Scaphoid Excision

Science.gov (United States)

Nichols, Jennifer A.; Bednar, Michael S.; Havey, Robert M.; Murray, Wendy M.

2016-01-01

At the wrist, kinematic coupling (the relationship between flexion-extension and radial-ulnar deviation) facilitates function. Although the midcarpal joint is critical for kinematic coupling, many surgeries, such as four-corner fusion (4CF) and scaphoid-excision four-corner fusion (SE4CF), modify the midcarpal joint. This study examines how 4CF and SE4CF influence kinematic coupling by quantifying wrist axes of rotation. Wrist axes of rotation were quantified in eight cadaveric specimens using an optimization algorithm, which fit a two-revolute joint model to experimental data. In each specimen, data measuring the motion of the third metacarpal relative to the radius was collected for three conditions (nonimpaired, 4CF, SE4CF). The calculated axes of rotation were compared using spherical statistics. The angle between the axes of rotation was used to assess coupling, as the nonimpaired wrist has skew axes (i.e., angle between axes approximately 60°). Following 4CF and SE4CF, the axes are closer to orthogonal than those of the nonimpaired wrist. The mean angle (±95 percent confidence interval) between the axes was 92.6° ± 25.2° and 99.8° ± 22.0° for 4CF and SE4CF, respectively. The axes of rotation defined in this study can be used to define joint models, which will facilitate more accurate computational and experimental studies of these procedures. PMID:27705062

Equi-axed and columnar grain growth in UO2

International Nuclear Information System (INIS)

White, R.J.

1997-01-01

The grain size of UO 2 is an important parameter in the actual performance and the modelling of the performance of reactor fuel elements. Many processes depend critically on the grain size, for example, the degree of initial densification, the evolution rate of stable fission gases, the release rates of radiologically hazardous fission products, the fission gas bubble swelling rates and the fuel creep. Many of these processes are thermally activated and further impact on the fuel thermal behavior thus creating complex feedback processes. In order to model the fuel performance accurately it is necessary to model the evolution of the fuel grain radius. When UO 2 is irradiated, the fission gases xenon and krypton are created from the fissioning uranium nucleus. At high temperatures these gases diffuse rapidly to the grain boundaries where they nucleate immobile lenticular shaped fission gas bubbles. In this paper the Hillert grain growth model is adapted to account for the inhibiting ''Zener'' effects of grain boundary fission gas porosity on grain boundary mobility and hence grain growth. It is shown that normal grain growth ceases at relatively low levels of irradiation. At high burnups, high temperatures and in regions of high temperature gradients, columnar grain growth is often observed, in some cases extending over more than fifty percent of the fuel radius. The model is further extended to account for the de-pinning of grains in the radial direction by the thermal gradient induced force on a fission gas grain boundary bubble. The observed columnar/equi-axed boundary is in fair agreement with the predictions of an evaporation/condensation model. The grain growth model described in this paper requires information concerning the scale of grain boundary porosity, the local fuel temperature and the local temperature gradient. The model is currently used in the Nuclear Electric version of the ENIGMA fuel modelling code. (author). 14 refs, 3 figs, 1 tab

DEFINING THE CHEMICAL SPACE OF PUBLIC GENOMIC ...

Science.gov (United States)

The current project aims to chemically index the genomics content of public genomic databases to make these data accessible in relation to other publicly available, chemically-indexed toxicological information. By defining the chemical space of public genomic data, it is possible to identify classes of chemicals on which to develop methodologies for the integration of chemogenomic data into predictive toxicology. The chemical space of public genomic data will be presented as well as the methodologies and tools developed to identify this chemical space.

Body size, body proportions, and mobility in the Tyrolean "Iceman"

Czech Academy of Sciences Publication Activity Database

Ruff, C. B.; Holt, B. M.; Sládek, Vladimír; Berner, M.; Murphy, W. A.; zur Nedden, D.; Seidler, H.; Recheis, W.

2006-01-01

Roč. 51, č. 1 (2006), s. 91-101 ISSN 0047-2484 R&D Projects: GA ČR GP206/01/D018 Grant - others:National Science Foundation(US) SBR 9530828 Institutional research plan: CEZ:AV0Z60930519 Keywords : European prehistory * biomechanics * body mass Subject RIV: AC - Archeology, Anthropology, Ethnology Impact factor: 3.267, year: 2006

Maintaining project consistency with transportation plans throughout the project life cycle with an emphasis on maintaining air quality conformity.

Science.gov (United States)

2014-11-01

This document was developed for transportation professionals responsible for project : development and has three basic goals: : 1. Define project consistency and identify the causes of project inconsistencies and the : critical junctures in the proje...

Body Contact and Body Language: Moments of Personal Development and Social and Cultural Learning Processes in Movement Psychology and Education

Directory of Open Access Journals (Sweden)

Helle Winther

2008-05-01

Full Text Available Body contact and body language are unique and existential and, although culturally dependent and socially embodied, they are also universal communication forms. For small children all over the world, warm, close and nourishing body contact is fundamental to their embodied experi­ence of themselves and the boundaries between self and world. In western societies, the modern premises for contact are in some ways developing from close contact to virtual communication. With this breadth of perspective in mind, the ques­tion is whether conscious and experimental work with body contact and body language in move­ment psychology and education provide potential for intense personal develop­ment as well as for social and cultural learning processes. This performative research project originates from the research project entitled, Movement Psy­chol­ogy: The Language of the Body and the Psy­chol­ogy of Movement based on the Dance Therapy Form Dansergia. The author, who is a practi­tioner-researcher, is methodologically inspir­ed by phenomenology, performative methods and a narrative and auto-ethnographic approach. The project will be presented in an organic, cre­at­ive and performative way. Through a moving dia­logue between a written text and a visceral on-line performance involving photographs and music, the reader/audience has the possibility to be touched both sensually and intellectually, although through communication is in cyberspace, missing the liveliness of direct body language. See online performance: http://www.viddler.com/player/c3c7a343/. URN: urn:nbn:de:0114-fqs0802637

inertial orientation tracker having automatic drift compensation using an at rest sensor for tracking parts of a human body

Science.gov (United States)

Foxlin, Eric M. (Inventor)

2004-01-01

A self contained sensor apparatus generates a signal that corresponds to at least two of the three orientational aspects of yaw, pitch and roll of a human-scale body, relative to an external reference frame. A sensor generates first sensor signals that correspond to rotational accelerations or rates of the body about certain body axes. The sensor may be mounted to the body. Coupled to the sensor is a signal processor for generating orientation signals relative to the external reference frame that correspond to the angular rate or acceleration signals. The first sensor signals are impervious to interference from electromagnetic, acoustic, optical and mechanical sources. The sensors may be rate sensors. An integrator may integrate the rate signal over time. A drift compensator is coupled to the rate sensors and the integrator. The drift compensator may include a gravitational tilt sensor or a magnetic field sensor or both. A verifier periodically measures the orientation of the body by a means different from the drift sensitive sate sensors. The verifier may take into account characteristic features of human motion, such as stillness periods. The drift compensator may be, in part, a Kalman filter, which may utilize statistical data about human head motion.

The CHPM2030 H2020 Project: Combined Heat, Power and Metal extraction from ultra-deep ore bodies

Science.gov (United States)

Miklovicz, Tamas; Bodo, Balazs; Cseko, Adrienn; Hartai, Eva; Madarasz, Tamas

2017-04-01

The CHPM2030 project consortium is working on a novel technology solution that can provide both geothermal energy and minerals, in a single interlinked process. The CHPM technology involves an integrated approach to cross fertilize between two yet separated research areas: unconventional geothermal energy and mineral extraction. This places the project's research agenda onto the frontiers of geothermal resources development, mineral extraction and electro-metallurgy with the objectives of converting ultra-deep metallic mineral formations into an "orebody-enhanced geothermal system". In the envisioned facility, an EGS is established on a 3-4 km deep ore mineralisation. Metal content from the ore body is mobilised using mild leaching and/or nanoparticles, then metals are recovered by high-temperature, high-pressure geothermal fluid electrolysis and gas-diffusion electroprecipitation and electrocrystallisation. Salinity gradient power from pre-treated geothermal fluids will also be used. In the project, all these will be carried out at laboratory scale (technology readiness level of 4-5), providing data for the conceptual framework, process optimisation and simulations. Integrated sustainability assessment will also be carried out on the economic feasibility, social impact, policy considerations, environmental impact and ethics concerns. During the last stage of the research agenda, the work will focus on mapping converging technological areas, setting a background for pilot implementation and developing research roadmaps for 2030 and 2050. Pilot study areas include South West England, the Iberian Pyrite Belt in Portugal, the Banatitic Magmatic and Metallogenic Belt in Romania, and three mining districts in Sweden. The project started in January 2016 and lasts for 42 months. In the first phase, the metallogenesis of Europe was investigated and the potential ore formations have been identified. The rock-mechanical characteristics of orebodies have also been examined

Framework to Define Structure and Boundaries of Complex Health Intervention Systems: The ALERT Project

DEFF Research Database (Denmark)

Boriani, Elena; Esposito, Roberto; Frazzoli, Chiara

2017-01-01

of a framework with focus on systems and system boundaries of interdisciplinary projects. As an example on how to apply our framework, we analyzed ALERT [an integrated sensors and biosensors’ system (BEST) aimed at monitoring the quality, health, and traceability of the chain of the bovine milk......], a multidisciplinary and interdisciplinary project based on the application of measurable biomarkers at strategic points of the milk chain for improved food security (including safety), human, and ecosystem health (1). In fact, the European food safety framework calls for science-based support to the primary producers......’ mandate for legal, scientific, and ethical responsibility in food supply. Because of its multidisciplinary and interdisciplinary approach involving human, animal, and ecosystem health, ALERT can be considered as a One Health project. Within the ALERT context, we identified the need to take into account...

Modern project management theory and knowledge framework

Institute of Scientific and Technical Information of China (English)

Luo Zhongbao

2014-01-01

The scholars increasingly pay at ention to the internal rules in knowledge development and innovation of construction engineering management,as wel as the framework for engineering management body of knowledge. Considering the one-of-a-kind characteristic of construction project s and highly dependence from projects on management knowledge and its innovation,this paper analyzed the knowledge body of engineering management and its development dimension ,such as thinking and knowledge structure dimensions. The engineering management knowledge innovation model and structural model were put forward. The paper reviewed and proposed the engineering management knowledge system framework under engineering thinking mode,including the basic knowledge system framework which is used in engineering management research ,and a framework for body of knowledge which is applicable for engineering management practice. Based on a brief analysis of engineering management practice,this paper analyzed the development progres of engineering management from engineering thinking to ethical thinking and philosophical thinking. A dynamic model formed from the modern engineering management theory was put forward. The construction of projects are divided into two stages:an investment decision-making stage, and project implementation stage. According to the fact that project owners obtain the project products by transaction,the management during project implementation stage are divided into two aspects:project transaction management for the owner, and construction project management for the contractor. Thus, the three theoretical modules of modern engineering management were established:project investment decision-making management theory,engineering transaction management theory, and engineering project management theory. This paper further analyzed the content and basic theoretical issues of each theoretical module.

Evaluation of simulation motion fidelity criteria in the vertical and directional axes

Science.gov (United States)

Schroeder, Jeffery A.

1993-01-01

An evaluation of existing motion fidelity criteria was conducted on the NASA Ames Vertical Motion Simulator. Experienced test pilots flew single-axis repositioning tasks in both the vertical and the directional axes. Using a first-order approximation of a hovering helicopter, tasks were flown with variations only in the filters that attenuate the commands to the simulator motion system. These filters had second-order high-pass characteristics, and the variations were made in the filter gain and natural frequency. The variations spanned motion response characteristics from nearly full math-model motion to fixed-base. Between configurations, pilots recalibrated their motion response perception by flying the task with full motion. Pilots subjectively rated the motion fidelity of subsequent configurations relative to this full motion case, which was considered the standard for comparison. The results suggested that the existing vertical-axis criterion was accurate for combinations of gain and natural frequency changes. However, if only the gain or the natural frequency was changed, the rated motion fidelity was better than the criterion predicted. In the vertical axis, the objective and subjective results indicated that a larger gain reduction was tolerated than the existing criterion allowed. The limited data collected in the yaw axis revealed that pilots had difficulty in distinguishing among the variations in the pure yaw motion cues.

Bodies, Emotions and Society in Latin America: A look from our own practices

Directory of Open Access Journals (Sweden)

Adrián Scribano

2016-04-01

Full Text Available One hundred forty (140 articles, twenty (20 issues and seven (7 years are some of the numbers that refer us to the complex and systematic look that a person interested in the bodies/emotions can be found in RELACES  to achieve an approach  to  these  field  studies  in  the  region.  This  paper  aims  to  provide  a  possible  approach  to  the  topics  included in  studies  of  bodies/emotions  in  Latin  America  through  the  information  that  provide  us  the  articles  that  have  been published in RELACES trying to outline the “state of affairs” in these last years. It seeks to end back to some “persistent” axis  of  agreements/disagreements  over  research  practices  regarding  bodies/emotions  and  systematize  some  sketchy notes  of  future  axes  presented  as  questions,  challenges  and  rejections.  Our  aim  is  to  take  this  written  as  a  point  of reference to produce  a cartography of how studies on bodies/emotions provide more accurate clue to inquire into the processes of social structuration.

Engaging Clinical Nurses in Quality Improvement Projects.

Science.gov (United States)

Moore, Susan; Stichler, Jaynelle F

2015-10-01

Clinical nurses have the knowledge and expertise required to provide efficient and proficient patient care. Time and knowledge deficits can prevent nurses from developing and implementing quality improvement or evidence-based practice projects. This article reviews a process for professional development of clinical nurses that helped them to define, implement, and analyze quality improvement or evidence-based practice projects. The purpose of this project was to educate advanced clinical nurses to manage a change project from inception to completion, using the Six Sigma DMAIC (Define, Measure, Analyze, Improve, Control) Change Acceleration Process as a framework. One-to-one mentoring and didactic in-services advanced the knowledge, appreciation, and practice of advanced practice clinicians who completed multiple change projects. The projects facilitated clinical practice changes, with improved patient outcomes; a unit cultural shift, with appreciation of quality improvement and evidence-based projects; and engagement with colleagues. Project outcomes were displayed in poster presentations at a hospital exposition for knowledge dissemination. Copyright 2015, SLACK Incorporated.

Safety Leadership Defined within the Australian Construction Industry

Directory of Open Access Journals (Sweden)

Luke Daniel

2015-11-01

Full Text Available This research explores the tenets of safety leadership within the Australian construction environment. The scope of this research aims to establish a universal definition of safety leadership and how it differs from other leadership disciplines. The literature review into this topic was governed by the parent disciplines of Safety and Leadership.  Gaps were identified in the literature that indicated safety leadership is not a well-defined concept and much of the work into safety leadership has been borrowed from other schools of leadership. An exploratory research methodology was utilised which rooted the research into the post-positivist methodology. There were twenty interviews conducted for this research, with participants coming from various leadership positions across multiple construction projects around Australia. Findings detailed a saturation of data that allowed for an empirical definition towards safety leadership to be established. As a person’s scope of responsibility increases, their view of safety leadership becomes synonymous with leadership; although differences do exist. These differences were attributed to the importance of demonstrating safety and working within the legal framework of Australian construction projects. It is proposed that this research offers a substantial contribution to knowledge, based upon a well-defined definition into safety leadership.

[Effects of the body fat mass and blood sugar and plasma resistin to slim exercise prescription for overweight and obesity students].

Science.gov (United States)

Bai, Youping; Zhang, Jing; Jiang, Shuangshuang; Sun, Jun; Zheng, Chenfei; Wang, Ke; Qian, Jingjing; Nie, Liuwang

2013-07-01

To explore the influences of slim exercise prescription on body fat mass, blood sugar and plasma resistin for overweight and obesity students. Subjects were 9 males and 13 females for simple overweight and obesity students of freshman and junior. The function capacity (FC) were defined after examine of body shape, physical function and exercise capacity. The slim goals and exercise projects were determined according to different objects. The exercise intensity was 60%-70% of FC and 13-15 levels of RPE. Exercise with each time was 60 min, exercise frequency was 5 times perweek, energy metabolism was 500-600 kcal at a time. The relative indexes were detected after 8 weeks. Implementing programmes of slim exercise prescription for 8 weeks, before and after the experiment in the males and females group. The weight, BMI, percentage of body fat (FAT%), waist and hip circumference ratio (WHR), body surface area (BS), fat indexes, the density of body for overweight and obesity the male and female students were significantly decreased (P exercise prescription was safe and sure, and could improve weight, BMI, FAT%, FM, WHR, BS, fat indexes, the density of body, blood sugar, plasma resistin in obesity without the diet control.

Project Quality Plan

DEFF Research Database (Denmark)

Sandborg-Petersen, Ulrik; Øhrstrøm, Peter

This document defines the procedures, standards, and strategies which will be used to ensure high standards of quality of the work produced within the HANDS project. It contains the following sections...

Gaze-Stabilizing Central Vestibular Neurons Project Asymmetrically to Extraocular Motoneuron Pools.

Science.gov (United States)

Schoppik, David; Bianco, Isaac H; Prober, David A; Douglass, Adam D; Robson, Drew N; Li, Jennifer M B; Greenwood, Joel S F; Soucy, Edward; Engert, Florian; Schier, Alexander F

2017-11-22

Within reflex circuits, specific anatomical projections allow central neurons to relay sensations to effectors that generate movements. A major challenge is to relate anatomical features of central neural populations, such as asymmetric connectivity, to the computations the populations perform. To address this problem, we mapped the anatomy, modeled the function, and discovered a new behavioral role for a genetically defined population of central vestibular neurons in rhombomeres 5-7 of larval zebrafish. First, we found that neurons within this central population project preferentially to motoneurons that move the eyes downward. Concordantly, when the entire population of asymmetrically projecting neurons was stimulated collectively, only downward eye rotations were observed, demonstrating a functional correlate of the anatomical bias. When these neurons are ablated, fish failed to rotate their eyes following either nose-up or nose-down body tilts. This asymmetrically projecting central population thus participates in both upward and downward gaze stabilization. In addition to projecting to motoneurons, central vestibular neurons also receive direct sensory input from peripheral afferents. To infer whether asymmetric projections can facilitate sensory encoding or motor output, we modeled differentially projecting sets of central vestibular neurons. Whereas motor command strength was independent of projection allocation, asymmetric projections enabled more accurate representation of nose-up stimuli. The model shows how asymmetric connectivity could enhance the representation of imbalance during nose-up postures while preserving gaze stabilization performance. Finally, we found that central vestibular neurons were necessary for a vital behavior requiring maintenance of a nose-up posture: swim bladder inflation. These observations suggest that asymmetric connectivity in the vestibular system facilitates representation of ethologically relevant stimuli without

Trevino Project: a fast-track approach for a small construction project

International Nuclear Information System (INIS)

Schick, C.J.; Lynn, N.S.

1982-01-01

The approach to a construction project can vary according to the size, location, and degree of difficulty associated with the project. This paper deals with one approach that can be taken to a small construction project, the fast-track approach. A small construction project can be defined as a project having less than $20 million capital cost or a project with a low degree of difficulty. This approach is very applicable to in-situ leaching uranium projects, small precious metal operations, etc. The approach to the small project is that of fast-tracking the project in order to minimize the time over which capital expenditure occurs and also to reduce the indirect costs of field expense, construction supplies, construction equipment, etc. In order to fast-track a project it is necessary to do a very precise job on the preliminary phases of the project such as preliminary engineering, plant site location, environmental permits, etc. 2 figures, 2 tables

Licensing plan for UMTRA project disposal sites

International Nuclear Information System (INIS)

1993-09-01

The Uranium Mill Tailings Remedial Action (UMTRA) Project Office developed a plan to define UMTRA Project licensing program objectives and establish a process enabling the DOE to document completion of remedial actions in compliance with 40 CFR 1 92 and the requirements of the NRC general license. This document supersedes the January 1987 Project Licensing Plan (DOE, 1987). The plan summarizes the legislative and regulatory basis for licensing, identifies participating agencies and their roles and responsibilities, defines key activities and milestones in the licensing process, and details the coordination of these activities. This plan provides an overview of the UMTRA Project from the end of remedial actions through the NRC's acceptance of a disposal site under the general license. The licensing process integrates large phases of the UMTRA Project. Other programmatic UMTRA Project documents listed in Section 6.0 provide supporting information

Design and Implementation of a Mobile Phone Locator Using Software Defined Radio

National Research Council Canada - National Science Library

Larsen, Ian P

2007-01-01

...) signal using software defined radio and commodity computer hardware. Using software designed by the GNU free software project as a base, standard GSM packets were transmitted and received over the air, and their arrival times detected...

Design of a high-torque machine with two integrated motors axes reducing the electric vehicle consumption

Directory of Open Access Journals (Sweden)

M. Chaieb

2008-03-01

Full Text Available The motorization of electric vehicle needs to work at a constant power on a wide range of speed. In order to be able to satisfy these requirements, we describe in this paper a solution, which consists in modifying of a simple structure of a permanent magnet motor by a double rotor structure integrating two motor axes into the same machine. This article describes, then, a design methodology of a permanent magnet motor with double rotor, radial flux, and strong starting torque for electric vehicles. This work consists on the analytical dimensioning of the motor by taking into account several operation constraints followed by a modelling by the finite elements method. This study is followed by the comparison between this motor and a motor with one rotor. A global model of the motor- converter is developed for the purpose to answer several optimisation problems

The DAG project, a 4m class telescope: the telescope main structure performances

Science.gov (United States)

Marchiori, G.; Busatta, A.; Ghedin, L.; Marcuzzi, E.; Manfrin, C.; Battistel, C.; Pirnay, O.; Flebus, Carlo; Yeşilyaprak, C.; Keskin, O.; Yerli, S.

2016-07-01

Dogu Anatolu Gözlemevi (DAG-Eastern Anatolia Observatory) Project is a 4m class optical, near-infrared Telescope and suitable enclosure which will be located at an altitude of 3.170m in Erzurum, Turkey. The DAG telescope is a project fully funded by Turkish Ministry of Development and the Atatürk University of Astrophysics Research Telescope - ATASAM. The Project is being developed by the Belgian company AMOS (project leader), which is also the optics supplier and EIE GROUP, the Telescope Main Structure supplier and responsible for the final site integration. The design of the Telescope Main Structure fits in the EIE TBO Program which aims at developing a Dome/Telescope systemic optimization process for both performances and competitive costs based on previous project commitments like NTT, VLT, VST and ASTRI. The optical Configuration of the DAG Telescope is a Ritchey-Chretien with two Nasmyth foci and a 4m primary thin mirror controlled in shape and position by an Active Optic System. The main characteristics of the Telescope Main Structure are an Altitude-Azimuth light and rigid structure system with Direct Drive Systems for both axis, AZ Hydrostatic Bearing System and Altitude standard bearing system; both axes are equipped with Tape Encoder System. An innovative Control System characterizes the telescope performance.

Preliminary Project Execution Plan for the Remote-Handled Low-Level Waste Disposal Project

Energy Technology Data Exchange (ETDEWEB)

David Duncan

2011-05-01

This preliminary project execution plan (PEP) defines U.S. Department of Energy (DOE) project objectives, roles and responsibilities of project participants, project organization, and controls to effectively manage acquisition of capital funds for construction of a proposed remote-handled low-level waste (LLW) disposal facility at the Idaho National Laboratory (INL). The plan addresses the policies, requirements, and critical decision (CD) responsibilities identified in DOE Order 413.3B, 'Program and Project Management for the Acquisition of Capital Assets.' This plan is intended to be a 'living document' that will be periodically updated as the project progresses through the CD process to construction and turnover for operation.

Preliminary Project Execution Plan for the Remote-Handled Low-Level Waste Disposal Project

International Nuclear Information System (INIS)

Duncan, David

2011-01-01

This preliminary project execution plan (PEP) defines U.S. Department of Energy (DOE) project objectives, roles and responsibilities of project participants, project organization, and controls to effectively manage acquisition of capital funds for construction of a proposed remote-handled low-level waste (LLW) disposal facility at the Idaho National Laboratory (INL). The plan addresses the policies, requirements, and critical decision (CD) responsibilities identified in DOE Order 413.3B, 'Program and Project Management for the Acquisition of Capital Assets.' This plan is intended to be a 'living document' that will be periodically updated as the project progresses through the CD process to construction and turnover for operation.

Project management plan for the Isotopes Facilities Deactivation Project at Oak Ridge National Laboratory. Environmental Restoration Program

International Nuclear Information System (INIS)

1995-01-01

The purpose of the Isotopes Facilities Deactivation Project (IFDP) is to place nineteen former isotopes production facilities at the Oak Ridge National Laboratory in a safe, stable, and environmentally sound condition suitable for an extended period of minimum surveillance and maintenance (S ampersand M) and as quickly and economically as possible. Implementation and completion of the deactivation project win further reduce the already small risks to the environment and to public safety and health. Furthermore, the project should result in significant S ampersand M cost savings in the future. The IFDP management plan has been prepared to document the project objectives, define organizational relationships and responsibilities, and outline the management control systems to be employed in the management of the project. The project has adopted a strategy to deactivate the simple facilities first, to reduce the scope of the project, and to gain experience before addressing more difficult facilities. A decision support system is being developed to identify those activities that best promote the project mission and result in largest cost savings. The Work Plan for the Isotopes Facilities Deactivation Project at Oak Ridge National Laboratory (Energy Systems 1994) defines the project schedule, the cost estimate, and the technical approach for the project

[Body Integrity Identity Disorder (BIID): interrogation of patients and theories for explanation].

Science.gov (United States)

Kasten, E

2009-01-01

Apotemnophilia, Amputee Identity Disorder or Body Integrity Identity Disorder (BIID) is the intensive feeling that the body will be "more complete" after amputation of a limb. The article disputes the question of matching personality characteristics of these subjects and asks for motives. Based on reports of nine individuals, triggering experiences are referred. In contrast to other children, often these subjects were fascinated by the sight of a handicapped person. In the article is investigated, whether the concerned limb showed more affections. Described is typical pretending behavior. Parallels to body dysmorphic disorder (BDD), fetishism, or delusions are investigated. These were minor, in most cases the wish was fixated on a specific limb, the subjects were aware of the abnormity of their desire and quarreled with the pros and cons. Sexual motives were found in one third. Some of the interviewed persons were in medical or psychological therapy; this did not let the desire disappear. In several BIID sufferers the wish for amputation changed, e. g. from the left to the right leg. This finding is not in accordance with the brain-dysfunction-theory. These people rather have an ideal of a "perfect" body minus one arm or leg. Most admire the beauty of a stump, and see amputees as "heroes" who still master their life in spite of their handicap. BIID is not a homogenous disturbance, one should separate three axes: 1. Strength of neuronal dysfunction, 2. Psychic components (e. g. secondary morbid gain) and 3. Intensity of sexual interests.

Detecting and Sonifying Temporal Patterns of Body Segments When Batting

Directory of Open Access Journals (Sweden)

Akemi Kobayashi

2018-02-01

Full Text Available To improve skill in sport activities it is essential to discern the temporal patterns of one’s own movements. Our previous motion capture experiment involving elite female softball players identified key differences in the temporal body movements between the top players and young players against fastballs/change-ups. In this paper, we found that key features could be extracted from the rotation of the pelvis and we developed a sonification feedback system with two nine-axes inertial sensors. Rotation patterns are converted into two synthesized sounds to represent the time at peak trunk rotation speed and impact time. We conducted a pilot experiment with this feedback proposal using expert and novice batters, male and female whether the participants can pace of the rotational motion in batting. As a result, this feedback approach may allow the user to alter the time of peak trunk rotation speed to more closely match the cue provided by the training sound.

Optimizing experimental parameters for the projection requirement in HAADF-STEM tomography

International Nuclear Information System (INIS)

Aveyard, R.; Zhong, Z.; Batenburg, K.J.; Rieger, B.

2017-01-01

Highlights: • The extent to which HAADF-STEM meets the projection requirement has been studied. • Multislice simulations used to model beam propagation and study signal linearity. • Propagation in crystalline and amorphous materials considered. • Optimal experimental set-up for the projection requirement is discussed. - Abstract: Tomographic reconstruction algorithms offer a means by which a tilt-series of transmission images can be combined to yield a three dimensional model of the specimen. Conventional reconstruction algorithms assume that the measured signal is a linear projection of some property, typically the density, of the material. Here we report the use of multislice simulations to investigate the extent to which this assumption is met in HAADF-STEM imaging. The use of simulations allows for a systematic survey of a range of materials and microscope parameters to inform optimal experimental design. Using this approach it is demonstrated that the imaging of amorphous materials is in good agreement with the projection assumption in most cases. Images of crystalline specimens taken along zone-axes are found to be poorly suited for conventional linear reconstruction algorithms due to channelling effects which produce enhanced intensities compared with off-axis images, and poor compliance with the projection requirement. Off-axis images are found to be suitable for reconstruction, though they do not strictly meet the linearity requirement in most cases. It is demonstrated that microscope parameters can be selected to yield improved compliance with the projection requirement.

Optimizing experimental parameters for the projection requirement in HAADF-STEM tomography

Energy Technology Data Exchange (ETDEWEB)

Aveyard, R., E-mail: r.a.aveyard@tudelft.nl [Department of Imaging Physics, Delft University of Technology, 2628CJ Delft (Netherlands); Zhong, Z.; Batenburg, K.J. [Centrum Wiskunde and Informatica, Science Park 123, NL-1098 XG Amsterdam (Netherlands); Rieger, B., E-mail: b.rieger@tudelft.nl [Department of Imaging Physics, Delft University of Technology, 2628CJ Delft (Netherlands)

2017-06-15

Highlights: • The extent to which HAADF-STEM meets the projection requirement has been studied. • Multislice simulations used to model beam propagation and study signal linearity. • Propagation in crystalline and amorphous materials considered. • Optimal experimental set-up for the projection requirement is discussed. - Abstract: Tomographic reconstruction algorithms offer a means by which a tilt-series of transmission images can be combined to yield a three dimensional model of the specimen. Conventional reconstruction algorithms assume that the measured signal is a linear projection of some property, typically the density, of the material. Here we report the use of multislice simulations to investigate the extent to which this assumption is met in HAADF-STEM imaging. The use of simulations allows for a systematic survey of a range of materials and microscope parameters to inform optimal experimental design. Using this approach it is demonstrated that the imaging of amorphous materials is in good agreement with the projection assumption in most cases. Images of crystalline specimens taken along zone-axes are found to be poorly suited for conventional linear reconstruction algorithms due to channelling effects which produce enhanced intensities compared with off-axis images, and poor compliance with the projection requirement. Off-axis images are found to be suitable for reconstruction, though they do not strictly meet the linearity requirement in most cases. It is demonstrated that microscope parameters can be selected to yield improved compliance with the projection requirement.

Changes in plasma (hydrocortisone) levels after whole-body irradiation with ultraviolet rays of defined wavelengths

International Nuclear Information System (INIS)

Bartelt, R.N.

1983-01-01

One hour after whole-body irradiation with a radiation source having its maximum of emission in the UVB range, at a radiation dose of 0.44 J/cm 2 , a significant fall in the mean values of the blood plasma hydrocortisone level (p [de

Body Fat Percentages by Dual-energy X-ray Absorptiometry Corresponding to Body Mass Index Cutoffs for Overweight and Obesity in Indian Children

Directory of Open Access Journals (Sweden)

Deepa Pandit

2009-01-01

Full Text Available Background Indians are suspected to have higher body fat percent at a given body mass index (BMI than their western counterparts. Objective To estimate percent body fat in apparently healthy Indian children and adolescents by dual-energy X-ray absorptiometry (DXA and explore linkages of BMI with body fat percent for better health risk assessment. Methods Age, weight, height of 316 boys and 250 girls (6–17 years were recorded. Body composition was measured by dual-energy X-ray absorptiometry (DXA. High adiposity was defined as body fat percent (BF% > McCarthy's 85th percentile of body fat reference data. Receiver operating characteristic analysis (ROC was carried out for CDC BMI Z score for it's ability to judge excess fatness. Results High BF% was seen in 38.5% boys and 54.0% girls (p < 0.05. Percentage of obese children as defined by the BMI cutoffs of International Obesity Task Force (IOTF (2.1% for boys and 6.9% for girls was lower than that using Indian (13.7% for boys and 20.9% for girls and CDC (14.1% for boys and 20.9% for girls cutoffs. The point closest to one on the ROC curves of CDC BMI Z-scores indicated high adiposity at BMI cutoff of 22 at the age of 17 yr in both the genders. Conclusions Higher body fat percentage is associated with lower BMI values in Indian children.

Short-time home coming project in evacuation zone

International Nuclear Information System (INIS)

Tatsuzaki, Hideo

2011-01-01

Accident at Fukushima Daiichi Nuclear Power Plants (NPPs) forced neighboring residents to evacuate, and evacuation zone (20 km radius from NPPs) was defined as highly contaminated and designated as no-entry zones. Residents had been obliged to live a refugee life for a longer period than expected. Short-time home coming project was initiated according to their requests. They came to the meeting place called transfer place (20 - 30 km radius from NPPs), wore protective clothing and personal dosimeter with having drinking water and came home in evacuation zone with staffs by bus. Their healthcare management professionals were fully prepared for emergency. After collecting necessary articles at home within two hours, they returned to the meeting place by bus for screening and dressing, and went back to refuge house. If screening data were greater than 13 kcpm using GM counters, partial body decontamination had been conducted by wiping and if greater than 100 kcpm, whole body decontamination was requested but not conducted. Dose rate of residents and staffs was controlled less than 1 mSv, which was alarm level of personal dosimeter. Stable iodine was prepared but actually not used. (T. Tanaka)

Modelling the dynamic mechanisms associated with the principal resonance of the seated human body.

Science.gov (United States)

Matsumoto, Y; Griffin, M J

2001-01-01

Simple mathematical models have been developed to obtain insights into resonance phenomena observed at about 5 Hz in the dynamic responses of the seated human body exposed to vertical whole-body vibration. Alternative lumped parameter models with a few degrees-of-freedom have been investigated. Rotational degrees-of-freedom, with eccentricity of the centre of gravity of the mass elements, represented responses in the fore-and-aft and pitch axes caused by vertical vibration. The causes of body resonance are not fully understood, but this information is required to develop cause-effect relationships between vibration exposures and effects on human health, comfort and performance.Method. The inertial and geometric parameters for models were based on published anatomical data. Other mechanical parameters were determined by comparing model responses to experimental data. Two models, with four and five degrees-of-freedom, gave more reasonable representations than other models. Mechanical parameters obtained with median and individual experimental data were consistent for vertical degrees-of-freedom but varied for rotational degrees-of-freedom. The resonance of the apparent mass at about 5 Hz may be attributed to a vibration mode consisting of vertical motion of the pelvis and legs and a pitch motion of the pelvis, both of which cause vertical motion of the upper-body above the pelvis, a bending motion of the spine, and vertical motion of the viscera. The mathematical models developed in this study may assist understanding of the dynamic mechanisms responsible for resonances in the seated human body. The information is required to represent mechanical responses of the body and assist the development of models for specific effects of vibration.

Continuity and change in interorganizational project practices : The Dutch shipbuilding industry, 1950-2010

NARCIS (Netherlands)

Levering, R.C.; Ligthart, R.; Noorderhaven, N.G.; Oerlemans, L.A.G.

2013-01-01

The Dutch shipbuilding industry has a longstanding tradition in project-based production. Recently, industry actors have acknowledged a serious misfit between interorganizational project practices, defined as behaviors related to collaboration, and interorganizational project demands, defined as

Assessment of body fat in the pony: part I. Relationships between the anatomical distribution of adipose tissue, body composition and body condition.

Science.gov (United States)

Dugdale, A H A; Curtis, G C; Harris, P A; Argo, C Mc

2011-09-01

Evaluation of equine body fat content is important for nutritional and clinical purposes. However, our understanding of total body fat and its regional distribution in the body is sparse. Currently, body fat evaluation relies on the subjective assessment of body condition score (BCS), which has never been validated against 'gold standard' chemical analysis or dissection measurements in ponies. To define the relationships between subjective (BCS), objective (morphometric) indices of body fat and 'gold standard' measurements of actual body composition. BCS and morphometry offer valid, noninvasive methods for determination of body fat in equids. Seven mature (mean ± s.e. 13 ± 3 years, 212 ± 14 kg, BCS 1.25-7/9), Welsh Mountain pony mares, destined for euthanasia (for nonresearch purposes), were used. For all ponies, body mass (BM), BCS and various morphometric measurements were recorded. Following euthanasia, all ponies were systematically dissected. Discrete white adipose tissue (WAT) depots were independently described. Gross, body chemical composition was determined by proximate analyses. Total somatic soft tissues increased linearly (r(2) = 1.00), whereas body WAT content (1-26% live BM) increased exponentially (r(2) = 0.96), with BCS. WAT was equally distributed between internal and external sites in all animals irrespective of BCS. Nuchal fat was a poor predictor of total WAT (r(2) = 0.66). Periorbital WAT did not alter with BCS (r(2) = 0.01). Heart girth:withers height and ultrasonic retroperitoneal fat depth were closely associated with total, chemically-extracted lipid which comprised 1-29% live BM (r(2) = 0.91 and 0.88, respectively). The exponential relationship between BCS and total body WAT/lipid suggests that BCS is unlikely to be a sensitive index of body fat for animals in moderate-obese states. Morphometric measurements (body girths and retroperitonel fat depth) may be useful to augment subjective BCS systems. © 2011 EVJ Ltd.

The relativistic invariant and the Galilean mass of bodies

International Nuclear Information System (INIS)

Kapuscik, E.

1992-02-01

We generalize the concept of the Galilean mass to the relativistic case. In the case of inequality of Galilean and inertial masses we calculate the relativistic invariant being constant along the trajectory of the moving body. It enables us to define an invariant measure of inertia of bodies. 4 refs. (author)

Human body capacitance: static or dynamic concept? [ESD

DEFF Research Database (Denmark)

Jonassen, Niels M

1998-01-01

A standing human body insulated from ground by footwear and/or floor covering is in principle an insulated conductor and has, as such, a capacitance, i.e. the ability to store a charge and possibly discharge the stored energy in a spark discharge. In the human body, the human body capacitance (HBC...... when a substantial part of the flux extends itself through badly defined stray fields. Since the concept of human body capacitance is normally used in a static (electric) context, it is suggested that the HBC be determined by a static method. No theoretical explanation of the observed differences...

Competency model for the project managers of technical projects

Science.gov (United States)

Duncan, William R.

1992-05-01

Traditional job description techniques were developed to support compensation decisions for hourly wage earners in a manufacturing environment. Their resultant focus on activities performed on the job works well in this environment where the ability to perform the activity adequately is objectively verifiable by testing and observation. Although many organizations have adapted these techniques for salaried employees and service environments, the focus on activities performed has never been satisfactory. For example, stating that a project manager `prepares regular project status reports' tells us little about what to look for in a potential project manager or how to determine if a practicing project manager is ready for additional responsibilities. The concept of a `competency model' has been developed within the last decade to address this shortcoming. Competency models focus on what skills are needed to perform the tasks defined by the job description. For example, a project manager must be able to communicate well both orally and in writing in order to `prepare regular project status reports.'

Health Monitoring System Based on Intra-Body Communication

Science.gov (United States)

Razak, A. H. A.; Ibrahim, I. W.; Ayub, A. H.; Amri, M. F.; Hamzi, M. H.; Halim, A. K.; Ahmad, A.; Junid, S. A. M. Al

2015-11-01

This paper presents a model of a Body Area Network (BAN) health monitoring system based on Intra-Body Communication. Intra-body Communication (IBC) is a communication technique that uses the human body as a medium for electrical signal communication. One of the visions in the health care industry is to provide autonomous and continuous self and the remote health monitoring system. This can be achieved via BAN, LAN and WAN integration. The BAN technology itself consists of short range data communication modules, sensors, controller and actuators. The information can be transmitted to the LAN and WAN via the RF technology such as Bluetooth, ZigBee and ANT. Although the implementations of RF communication have been successful, there are still limitations in term of power consumption, battery lifetime, interferences and signal attenuations. One of the solutions for Medical Body Area Network (MBANs) to overcome these issues is by using an IBC technique because it can operate at lower frequencies and power consumption compared to the existing techniques. The first objective is to design the IBC's transmitter and receiver modules using the off the shelf components. The specifications of the modules such as frequency, data rate, modulation and demodulation coding system were defined. The individual module were designed and tested separately. The modules was integrated as an IBC system and tested for functionality then was implemented on PCB. Next objective is to model and implement the digital parts of the transmitter and receiver modules on the Altera's FPGA board. The digital blocks were interfaced with the FPGA's on board modules and the discrete components. The signals that have been received from the transmitter were converted into a proper waveform and it can be viewed via external devices such as oscilloscope and Labview. The signals such as heartbeats or pulses can also be displayed on LCD. In conclusion, the IBC project presents medical health monitoring model

The unfinished body: the medical and social reshaping of disabled young bodies.

Science.gov (United States)

McLaughlin, Janice; Coleman-Fountain, Edmund

2014-11-01

Stories about disability are heavily shaped by the narratives offered by medicine and society. Those narratives enact an 'anomalous' body that is constructed as distant from the norm and therefore 'damaged' but also fixable. In this paper we explore how such narratives, and the practices they encompass, influence the stories disabled young people tell about their bodies and impairment. We do so by drawing on narrative qualitative interviews and visual practices carried out with seventeen disabled young people in a project funded by the Economic and Social Research Council that took place between 2011 and 2012 in the North East of England. The findings discussed here focus on how medical and societal responses to bodily difference become part of the stories disabled young people tell about their bodies, and influence the way they work with the body as something which remains 'unfinished' and therefore both fixable and flawed. Our conclusion is that a narrative of an unfinished body is produced, as young people manage their bodies as something that is integral to their emerging identity, but also as a potential threat that could undermine and give away their labour in making an 'ordinary' functioning body and life. The paper contributes to medical sociology and sociology of the body by producing new knowledge about how disabled embodiment is lived and framed by disabled young people in the context of ongoing attempts to change the body. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

An Informational Algorithm as the Basis for Perception-Action Control of the Instantaneous Axes of the Knee.

Science.gov (United States)

Kim, Wangdo; Espanha, Margarida M; Veloso, António P; Araújo, Duarte; João, Filipa; Carrão, Luis; Kohles, Sean S

2013-03-27

Traditional locomotion studies emphasize an optimization of the desired movement trajectories while ignoring sensory feedback. We propose an information based theory that locomotion is neither triggered nor commanded but controlled. The basis for this control is the information derived from perceiving oneself in the world. Control therefore lies in the human-environment system. In order to test this hypothesis, we derived a mathematical foundation characterizing the energy that is required to perform a rotational twist, with small amplitude, of the instantaneous axes of the knee (IAK). We have found that the joint's perception of the ground reaction force may be replaced by the co-perception of muscle activation with appropriate intensities. This approach generated an accurate comparison with known joint forces and appears appropriate in so far as predicting the effect on the knee when it is free to twist about the IAK.

The multianalyser system of the three axes neutron spectrometer PUMA: Pilot experiments with the innovative multiplex technique

Energy Technology Data Exchange (ETDEWEB)

Sobolev, Oleg; Hoffmann, Ron; Gibhardt, Holger [Institute for Physical Chemistry, Georg-August-University of Göttingen, Tammannstr. 6, D-37077 Göttingen (Germany); Jünke, Norbert [Forschungs-Neutronenquelle Heinz-Maier-Leibnitz, Technical University of Munich, Lichtenbergstr. 1, D-85748 Garching (Germany); Knorr, Andreas; Meyer, Volker [Institute for Physical Chemistry, Georg-August-University of Göttingen, Tammannstr. 6, D-37077 Göttingen (Germany); Eckold, Götz, E-mail: geckold@gwdg.de [Institute for Physical Chemistry, Georg-August-University of Göttingen, Tammannstr. 6, D-37077 Göttingen (Germany)

2015-02-01

A new type of multiplex technique for three axes neutron spectrometers has been realized and successfully commissioned at the PUMA spectrometer at FRM II. Consisting of eleven analyser-detector channels which can be configured individually, this technique is especially suitable for kinetic experiments where a single excitation spectrum is recorded as a function of time without the need to move the spectrometer. On a time-scale of seconds an entire spectrum can be recorded thus allowing users to monitor changes during fast kinetic processes in single shot experiments without the need for stroboscopic techniques. Moreover, the multianalyser system provides an efficient and rapid tool for mapping excitations in (Q,ω)-space. The results of pilot experiments demonstrate the performance of this new technique and a user-friendly software is presented which assists users during their experiments.

Opportunities for AFRA NC implementing Projects

International Nuclear Information System (INIS)

2017-01-01

Some of the AFRA Objectives are to Establish common understanding that all networks operate under the AFRA framework as an African single intergovernmental body Align these networks with the common objectives of AFRA for strengthening activities and to define the modalities for collaboration within AFRA MSs. Some of the achievements in 2016 are: Under RAF/0/038 “Promoting Technical Cooperation among Developing Countries (TCDC) in Africa through Triangular Partnerships”, adequate support was provided to facilitate the implementation of several joint project proposals submitted by Member States in various fields of activity including NDT, Radiation processing, and Education and Training in nuclear science and technology. Under RAF0041: “Sharing Best Practices in Preventive Maintenance of Nuclear Equipment”, support was provided to Member States at the Seibersdorf Laboratory to improve the maintenance of medical and scientific instrumentation through capacity development for repair services, preventive maintenance, and cost recovery through income generated from the provision of services

A guide to the project management body of knowledge PMBOK Guide

CERN Document Server

2017-01-01

The PMBOK® Guide–Sixth Edition – PMI’s flagship publication has been updated to reflect the latest good practices in project management. New to the Sixth Edition, each knowledge area will contain a section entitled Approaches for Agile, Iterative and Adaptive Environments, describing how these practices integrate in project settings. It will also contain more emphasis on strategic and business knowledge—including discussion of project management business documents—and information on the PMI Talent Triangle™ and the essential skills for success in today’s market.

Review of the project risk management plan in the capital projects organization at ConocoPhillips

OpenAIRE

Meidell, Camilla

2011-01-01

Master's thesis in Risk management Project Risk Management (PRM) has in recent years become an important aspect of business organization and project management. There has always been a requirement for some risk management at COPNO. However about 3 years ago the process became much more defined and has become a requirement for the contingency used on projects to be based upon the risking process. Since risk management in projects is a requirement in the CP organization it is ...

Whole-body MRI screening

Energy Technology Data Exchange (ETDEWEB)

Puls, Ralf [HELIOS Klinikum Erfurt (Germany). Inst. of Diagnostic and Interventional Radiology and Neuroradiology; Hosten, Norbert (ed.) [Universitaetsklinikum Greifswald (Germany). Diagnostic Radiology and Neuroradiology

2014-07-01

The advent of dedicated whole-body MRI scanners has made it possible to image the human body from head to toe with excellent spatial resolution and with the sensitivity and specificity of conventional MR systems. A comprehensive screening examination by MRI relies on fast image acquisition, and this is now feasible owing to several very recent developments, including multichannel techniques, new surface coil systems, and automatic table movement. The daily analysis of whole-body MRI datasets uncovers many incidental findings, which are discussed by an interdisciplinary advisory board of physicians from all specialties. This book provides a systematic overview of these incidental findings with the aid of approximately 240 high-quality images. The radiologists involved in the project have written chapters on each organ system, presenting a structured compilation of the most common findings, their morphologic appearances on whole-body MRI, and guidance on their clinical management. Chapters on technical and ethical issues are also included. It is hoped that this book will assist other diagnosticians in deciding how to handle the most common incidental findings encountered when performing whole-body MRI.

Whole-body MRI screening

International Nuclear Information System (INIS)

Puls, Ralf; Hosten, Norbert

2014-01-01

The advent of dedicated whole-body MRI scanners has made it possible to image the human body from head to toe with excellent spatial resolution and with the sensitivity and specificity of conventional MR systems. A comprehensive screening examination by MRI relies on fast image acquisition, and this is now feasible owing to several very recent developments, including multichannel techniques, new surface coil systems, and automatic table movement. The daily analysis of whole-body MRI datasets uncovers many incidental findings, which are discussed by an interdisciplinary advisory board of physicians from all specialties. This book provides a systematic overview of these incidental findings with the aid of approximately 240 high-quality images. The radiologists involved in the project have written chapters on each organ system, presenting a structured compilation of the most common findings, their morphologic appearances on whole-body MRI, and guidance on their clinical management. Chapters on technical and ethical issues are also included. It is hoped that this book will assist other diagnosticians in deciding how to handle the most common incidental findings encountered when performing whole-body MRI.

Implementing Software Defined Radio

CERN Document Server

Grayver, Eugene

2013-01-01

Software Defined Radio makes wireless communications easier, more efficient, and more reliable. This book bridges the gap between academic research and practical implementation. When beginning a project, practicing engineers, technical managers, and graduate students can save countless hours by considering the concepts presented in these pages. The author covers the myriad options and trade-offs available when selecting an appropriate hardware architecture. As demonstrated here, the choice between hardware- and software-centric architecture can mean the difference between meeting an aggressive schedule and bogging down in endless design iterations. Because of the author’s experience overseeing dozens of failed and successful developments, he is able to present many real-life examples. Some of the key concepts covered are: Choosing the right architecture for the market – laboratory, military, or commercial Hardware platforms – FPGAs, GPPs, specialized and hybrid devices Standardization efforts to ens...

Pattern of Corticospinal Projections Defined by Brain Mapping During Resective Epilepsy Surgery in a Patient with Congenital Hemiparesis and Intractable Epilepsy.

Science.gov (United States)

Yang, Chen-Ya; Chen, Hsin-Hung; Chen, Chien; Chiu, Jan-Wei; Chou, Chen-Liang; Yang, Tsui-Fen

2017-11-01

Congenital or early-onset brain structural lesions often cause contralateral hemiparesis, cognitive deficits, developmental delays, and seizures. Seizure is the most debilitating condition, as it greatly impairs quality of life in both the affected individuals and their caregivers and prevents them from active social participation. A 34-year-old man with hemiparesis and early-onset seizures since childhood owing to a congenital brain lesion developed intractable seizures in the last 2 years and was subsequently admitted for resective epileptic surgery. During the operation, we employed an innovative intraoperative neurophysiologic monitoring technique. In contrast to routine application for transcranial stimulation, we recorded compound muscle action potentials over the bilateral limb muscles simultaneously, instead of over the contralateral muscles only, to determine the patterns of the corticospinal projections. Transcranial stimulation over the bilateral hemispheres was applied before craniotomy, and direct cortical stimulation over the lesioned hemisphere was applied after craniotomy. By integrating both approaches, we could first identify the pattern of corticospinal projections before craniotomy and then accurately define the noneloquent area, which guided the resection to successfully accomplish the surgical goal. This technique is simple because no patient participation is required. We believe that it has the potential to replace conventional preoperative functional magnetic resonance imaging and transcranial magnetic stimulation in resective epilepsy surgery, particularly for young patients. Not only can it improve the safety of surgical procedures, but also it can help predict functional outcome. Copyright © 2017 Elsevier Inc. All rights reserved.

Nuclear bodies: news insights into structure and function

Czech Academy of Sciences Publication Activity Database

Staněk, David; Fox, A.H.

2017-01-01

Roč. 46, léto (2017), s. 94-101 ISSN 0955-0674 R&D Projects: GA ČR GA15-00790S; GA MŠk LO1419 Institutional support: RVO:68378050 Keywords : rna-binding proteins * cajal bodies * smn complex * human-cells * in-vivo * human telomerase * coiled bodies * lncrna neat1 * u1 snrnp * body Subject RIV: EB - Genetics ; Molecular Biology OBOR OECD: Cell biology Impact factor: 9.937, year: 2016

Plutonium Finishing Plant Transition Project mission analysis report

International Nuclear Information System (INIS)

Courson, D.B.

1994-01-01

This report defines the mission for the Plutonium Finishing Plant Transition Project (PFPTP) using a systems engineering approach. This mission analysis will be the basis for the functional analysis which will further define and break down the mission statement into all of the detailed functions required to accomplish the mission. The functional analysis is then used to develop requirements, allocate those requirements to functions, and eventually be used to design the system. This report: presents the problem which will be addressed, defines PFP Transition Project, defines the overall mission statement, describes the existing, initial conditions, defines the desired, final conditions, identifies the mission boundaries and external interfaces, identifies the resources required to carry out the mission, describes the uncertainties and risks, and discusses the measures which will be used to determine success

Lipid and liver abnormalities in haemoglobin A1c-defined prediabetes and type 2 diabetes.

Science.gov (United States)

Calanna, S; Scicali, R; Di Pino, A; Knop, F K; Piro, S; Rabuazzo, A M; Purrello, F

2014-06-01

We aimed to investigate lipid abnormalities and liver steatosis in patients with HbA1c-defined prediabetes and type 2 diabetes compared to individuals with HbA1c-defined normoglycaemia. Ninety-one subjects with prediabetes according to HbA1c, i.e. from 5.7 to 6.4% (39-46 mmol/mol), 50 newly diagnosed patients with HbA1c-defined type 2 diabetes (HbA1c ≥6.5% [≥48 mmol/mol]), and 67 controls with HbA1c lower than 5.7% (prediabetes were characterised by: lower apolipoprotein AI and HDL cholesterol levels, higher blood pressure, triglycerides levels and apolipoprotein B/apolipoprotein AI ratio, higher FLI, increased prevalence of and more severe hepatic steatosis, similar BARD score, and higher total body fat mass. In comparison to subjects with diabetes, subjects with prediabetes exhibited: similar blood pressure and apolipoprotein B/apolipoprotein AI ratio, similar FLI, reduced prevalence of and less severe hepatic steatosis, lower BARD score, increased percent fat and lower total body muscle mass. In comparison to controls, subjects with diabetes showed: lower apolipoprotein AI and HDL cholesterol levels, higher blood pressure and triglycerides levels, higher FLI, increased prevalence of and more severe hepatic steatosis, higher BARD score, and higher total body muscle mass. Moreover, HbA1c was correlated with BMI, HOMA-IR, triglycerides, HDL cholesterol, AST, and ALT. Subjects with HbA1c-defined prediabetes and type 2 diabetes, respectively, are characterised by abnormalities in lipid profile and liver steatosis, thus exhibiting a severe risk profile for cardiovascular and liver diseases. Copyright © 2014 Elsevier B.V. All rights reserved.

Remote handling devices for use behind shielding walls

International Nuclear Information System (INIS)

1991-04-01

A manipulator for general use must be able, at all places of the working area, to carry out three independent translatory movements and forces in the direction of three coordinate axes and optionally to carry out, without previous additional adjustment movement, three independent rotary movements and torques in axes in the direction of the three coordinate axes, always in both directions and on one body. (orig./HP) [de

Organization of project management

International Nuclear Information System (INIS)

Schmidt, R.

1975-01-01

When speaking about interfaces within a project and their management, one has to understand and define what an interface is. In general, each component facing another one and each person working on a project with another person represents an interface. Therefore a project will consist practically in its entirety of interfaces with components and people sandwiched between them. This paper is limited to the most important interfaces with a focus on the problems occuring at them and their resolution. (orig.) [de

Body composition analysis within 1 month after gastrectomy for gastric cancer.

Science.gov (United States)

Aoyama, Toru; Kawabe, Taiichi; Hirohito, Fujikawa; Hayashi, Tsutomu; Yamada, Takanobu; Tsuchida, Kazuhito; Sato, Tsutomu; Oshima, Takashi; Rino, Yasushi; Masuda, Munetaka; Ogata, Takashi; Cho, Haruhiko; Yoshikawa, Takaki

2016-04-01

A significant body weight loss (BWL) is observed during 1 month after gastrectomy for gastric cancer. However, it remains unclear which body component mainly accounts for the weight loss. Two-hundred forty-four patients who underwent gastrectomy for gastric cancer between May 2010 and October 2013 were examined. Body weight and composition were evaluated by a bioelectrical impedance analyzer within 1 week before surgery (first measurement), at 1 week after surgery (second measurement), and at 1 month after surgery (third measurement). The changes in the early period were defined as the differences until the second measurement, and those in the late period were defined as the differences from the second to the third measurement. Total BWL within 1 month was -3.4 kg, and the rate of body weight at 1 month to the preoperative body weight was 94.1 %. BWL was significantly greater in the early period than in the late period (-2.1 kg vs -1.2 kg, p body mass was significantly greater than loss of fat mass (-1.5 kg vs -0.6 kg, p body mass accounted for a significant part of the BWL during the first week.

National Ignition Facility Project Site Safety Program

International Nuclear Information System (INIS)

Dun, C

2003-01-01

This Safety Program for the National Ignition Facility (NIF) presents safety protocols and requirements that management and workers shall follow to assure a safe and healthful work environment during activities performed on the NIF Project site. The NIF Project Site Safety Program (NPSSP) requires that activities at the NIF Project site be performed in accordance with the ''LLNL ES and H Manual'' and the augmented set of controls and processes described in this NIF Project Site Safety Program. Specifically, this document: (1) Defines the fundamental NIF site safety philosophy. (2) Defines the areas covered by this safety program (see Appendix B). (3) Identifies management roles and responsibilities. (4) Defines core safety management processes. (5) Identifies NIF site-specific safety requirements. This NPSSP sets forth the responsibilities, requirements, rules, policies, and regulations for workers involved in work activities performed on the NIF Project site. Workers are required to implement measures to create a universal awareness that promotes safe practice at the work site and will achieve NIF management objectives in preventing accidents and illnesses. ES and H requirements are consistent with the ''LLNL ES and H Manual''. This NPSSP and implementing procedures (e.g., Management Walkabout, special work procedures, etc.,) are a comprehensive safety program that applies to NIF workers on the NIF Project site. The NIF Project site includes the B581/B681 site and support areas shown in Appendix B

The Context of Body Art

Directory of Open Access Journals (Sweden)

Renata Clerici

2011-10-01

Full Text Available The present study analyses factors associated with the propensity for piercing and tattooing among adolescents, from a survey conducted in 2007 in high schools in the Veneto Region (Northeast Italy. After some descriptive analyses, multinomial logistic regression models were applied to identify what predicts the practice of, interest in, or indifference to piercing and tattooing. Results show gender differences in the approach to body modification: For girls, body art is considered a mainstream activity involving younger cohorts; piercing and tattooing become a way of increasing their own body satisfaction. For boys, factors connected with the propensity for these practices are a low cultural background and the importance given to physical appearance. For both boys and girls, a significant aspect in defining attitudes toward body art practices is the values system: Values such as enjoyment, beauty, and youth, are found to be closely connected with a high propensity for these practices.

Vertebral Adaptations to Large Body Size in Theropod Dinosaurs.

Directory of Open Access Journals (Sweden)

John P Wilson

Full Text Available Rugose projections on the anterior and posterior aspects of vertebral neural spines appear throughout Amniota and result from the mineralization of the supraspinous and interspinous ligaments via metaplasia, the process of permanent tissue-type transformation. In mammals, this metaplasia is generally pathological or stress induced, but is a normal part of development in some clades of birds. Such structures, though phylogenetically sporadic, appear throughout the fossil record of non-avian theropod dinosaurs, yet their physiological and adaptive significance has remained unexamined. Here we show novel histologic and phylogenetic evidence that neural spine projections were a physiological response to biomechanical stress in large-bodied theropod species. Metaplastic projections also appear to vary between immature and mature individuals of the same species, with immature animals either lacking them or exhibiting smaller projections, supporting the hypothesis that these structures develop through ontogeny as a result of increasing bending stress subjected to the spinal column. Metaplastic mineralization of spinal ligaments would likely affect the flexibility of the spinal column, increasing passive support for body weight. A stiff spinal column would also provide biomechanical support for the primary hip flexors and, therefore, may have played a role in locomotor efficiency and mobility in large-bodied species. This new association of interspinal ligament metaplasia in Theropoda with large body size contributes additional insight to our understanding of the diverse biomechanical coping mechanisms developed throughout Dinosauria, and stresses the significance of phylogenetic methods when testing for biological trends, evolutionary or not.

Vertebral Adaptations to Large Body Size in Theropod Dinosaurs.

Science.gov (United States)

Wilson, John P; Woodruff, D Cary; Gardner, Jacob D; Flora, Holley M; Horner, John R; Organ, Chris L

2016-01-01

Rugose projections on the anterior and posterior aspects of vertebral neural spines appear throughout Amniota and result from the mineralization of the supraspinous and interspinous ligaments via metaplasia, the process of permanent tissue-type transformation. In mammals, this metaplasia is generally pathological or stress induced, but is a normal part of development in some clades of birds. Such structures, though phylogenetically sporadic, appear throughout the fossil record of non-avian theropod dinosaurs, yet their physiological and adaptive significance has remained unexamined. Here we show novel histologic and phylogenetic evidence that neural spine projections were a physiological response to biomechanical stress in large-bodied theropod species. Metaplastic projections also appear to vary between immature and mature individuals of the same species, with immature animals either lacking them or exhibiting smaller projections, supporting the hypothesis that these structures develop through ontogeny as a result of increasing bending stress subjected to the spinal column. Metaplastic mineralization of spinal ligaments would likely affect the flexibility of the spinal column, increasing passive support for body weight. A stiff spinal column would also provide biomechanical support for the primary hip flexors and, therefore, may have played a role in locomotor efficiency and mobility in large-bodied species. This new association of interspinal ligament metaplasia in Theropoda with large body size contributes additional insight to our understanding of the diverse biomechanical coping mechanisms developed throughout Dinosauria, and stresses the significance of phylogenetic methods when testing for biological trends, evolutionary or not.

Assessing the Nonequilibrium Thermodynamics in a Quenched Quantum Many-Body System via Single Projective Measurements

Directory of Open Access Journals (Sweden)

L. Fusco

2014-08-01

Full Text Available We analyze the nature of the statistics of the work done on or by a quantum many-body system brought out of equilibrium. We show that, for the sudden quench and for an initial state that commutes with the initial Hamiltonian, it is possible to retrieve the whole nonequilibrium thermodynamics via single projective measurements of observables. We highlight, in a physically clear way, the qualitative implications for the statistics of work coming from considering processes described by operators that either commute or do not commute with the unperturbed Hamiltonian of a given system. We consider a quantum many-body system and derive an expression that allows us to give a physical interpretation, for a thermal initial state, to all of the cumulants of the work in the case of quenched operators commuting with the unperturbed Hamiltonian. In the commuting case, the observables that we need to measure have an intuitive physical meaning. Conversely, in the noncommuting case, we show that, although it is possible to operate fully within the single-measurement framework irrespectively of the size of the quench, some difficulties are faced in providing a clear-cut physical interpretation to the cumulants. This circumstance makes the study of the physics of the system nontrivial and highlights the nonintuitive phenomenology of the emergence of thermodynamics from the fully quantum microscopic description. We illustrate our ideas with the example of the Ising model in a transverse field showing the interesting behavior of the high-order statistical moments of the work distribution for a generic thermal state and linking them to the critical nature of the model itself.

Defining Instructional Quality by Employing the Total Quality Management (TQM) Method: A Research Project.

Science.gov (United States)

Croker, Robert E.; And Others

The feasibility of using W. E. Deming's total quality management (TQM) method to define instructional quality was examined by surveying three groups of students attending Idaho State University's College of Education and School of Applied Technology: 31 students seeking cosmetology certification; 75 undergraduates pursuing degrees in corporate…

Material Feminist Practices in a Body Politics Seminar

Science.gov (United States)

Stein, Rachel

2014-01-01

In this article, Rachel Stein focuses on two course projects in which students apply materialist feminist practices within a capstone women's studies seminar entitled Body Politics. Undertaking these projects, students become more critically aware of gendered materialities that they had previously taken for granted as they deconstruct material…

Reconfigurable, Cognitive Software-Defined Radio

Science.gov (United States)

Bhat, Arvind

2015-01-01

Software-defined radio (SDR) technology allows radios to be reconfigured to perform different communication functions without using multiple radios to accomplish each task. Intelligent Automation, Inc., has developed SDR platforms that switch adaptively between different operation modes. The innovation works by modifying both transmit waveforms and receiver signal processing tasks. In Phase I of the project, the company developed SDR cognitive capabilities, including adaptive modulation and coding (AMC), automatic modulation recognition (AMR), and spectrum sensing. In Phase II, these capabilities were integrated into SDR platforms. The reconfigurable transceiver design employs high-speed field-programmable gate arrays, enabling multimode operation and scalable architecture. Designs are based on commercial off-the-shelf (COTS) components and are modular in nature, making it easier to upgrade individual components rather than redesigning the entire SDR platform as technology advances.

Body composition estimation from selected slices: equations computed from a new semi-automatic thresholding method developed on whole-body CT scans

Directory of Open Access Journals (Sweden)

Alizé Lacoste Jeanson

2017-05-01

Full Text Available Background Estimating volumes and masses of total body components is important for the study and treatment monitoring of nutrition and nutrition-related disorders, cancer, joint replacement, energy-expenditure and exercise physiology. While several equations have been offered for estimating total body components from MRI slices, no reliable and tested method exists for CT scans. For the first time, body composition data was derived from 41 high-resolution whole-body CT scans. From these data, we defined equations for estimating volumes and masses of total body AT and LT from corresponding tissue areas measured in selected CT scan slices. Methods We present a new semi-automatic approach to defining the density cutoff between adipose tissue (AT and lean tissue (LT in such material. An intra-class correlation coefficient (ICC was used to validate the method. The equations for estimating the whole-body composition volume and mass from areas measured in selected slices were modeled with ordinary least squares (OLS linear regressions and support vector machine regression (SVMR. Results and Discussion The best predictive equation for total body AT volume was based on the AT area of a single slice located between the 4th and 5th lumbar vertebrae (L4-L5 and produced lower prediction errors (|PE| = 1.86 liters, %PE = 8.77 than previous equations also based on CT scans. The LT area of the mid-thigh provided the lowest prediction errors (|PE| = 2.52 liters, %PE = 7.08 for estimating whole-body LT volume. We also present equations to predict total body AT and LT masses from a slice located at L4-L5 that resulted in reduced error compared with the previously published equations based on CT scans. The multislice SVMR predictor gave the theoretical upper limit for prediction precision of volumes and cross-validated the results.

Body composition estimation from selected slices: equations computed from a new semi-automatic thresholding method developed on whole-body CT scans.

Science.gov (United States)

Lacoste Jeanson, Alizé; Dupej, Ján; Villa, Chiara; Brůžek, Jaroslav

2017-01-01

Estimating volumes and masses of total body components is important for the study and treatment monitoring of nutrition and nutrition-related disorders, cancer, joint replacement, energy-expenditure and exercise physiology. While several equations have been offered for estimating total body components from MRI slices, no reliable and tested method exists for CT scans. For the first time, body composition data was derived from 41 high-resolution whole-body CT scans. From these data, we defined equations for estimating volumes and masses of total body AT and LT from corresponding tissue areas measured in selected CT scan slices. We present a new semi-automatic approach to defining the density cutoff between adipose tissue (AT) and lean tissue (LT) in such material. An intra-class correlation coefficient (ICC) was used to validate the method. The equations for estimating the whole-body composition volume and mass from areas measured in selected slices were modeled with ordinary least squares (OLS) linear regressions and support vector machine regression (SVMR). The best predictive equation for total body AT volume was based on the AT area of a single slice located between the 4th and 5th lumbar vertebrae (L4-L5) and produced lower prediction errors (|PE| = 1.86 liters, %PE = 8.77) than previous equations also based on CT scans. The LT area of the mid-thigh provided the lowest prediction errors (|PE| = 2.52 liters, %PE = 7.08) for estimating whole-body LT volume. We also present equations to predict total body AT and LT masses from a slice located at L4-L5 that resulted in reduced error compared with the previously published equations based on CT scans. The multislice SVMR predictor gave the theoretical upper limit for prediction precision of volumes and cross-validated the results.

A study of images of Projective Angles of pulmonary veins

Energy Technology Data Exchange (ETDEWEB)

Wang Jue [Beijing Anzhen Hospital, Beijing (China); Zhaoqi, Zhang [Beijing Anzhen Hospital, Beijing (China)], E-mail: zhaoqi5000@vip.sohu.com; Yu Wei; Miao Cuilian; Yan Zixu; Zhao Yike [Beijing Anzhen Hospital, Beijing (China)

2009-09-15

Aims: In images of magnetic resonance and computed tomography (CT) there are visible angles between pulmonary veins and the coronary, transversal or sagittal section of body. In this study these angles are measured and defined as Projective Angles of pulmonary veins. Several possible influential factors and characters of distribution are studied and analyzed for a better understanding of this imaging anatomic character of pulmonary veins. And it could be the anatomic base of adjusting correctly the angle of the central X-ray of the angiography of pulmonary veins undergoing the catheter ablation of atrial fibrillation (AF). Method: Images of contrast enhanced magnetic resonance angiography (CEMRA) and contrast enhanced computer tomography (CECT) of the left atrium and pulmonary veins of 137 health objects and patients with atrial fibrillation (AF) are processed with the technique of post-processing, and Projective Angles to the coronary and transversal sections are measured and analyzed statistically. Result: Project Angles of pulmonary veins are one of real and steady imaging anatomic characteristics of pulmonary veins. The statistical distribution of variables is relatively concentrated, with a fairly good representation of average value. It is possible to improve the angle of the central X-ray according to the average value in the selective angiography of pulmonary veins undergoing the catheter ablation of AF.

Nutritional assessment with body composition measurements

International Nuclear Information System (INIS)

Shizgal, H.M.

1987-01-01

The measurement of body composition by multiple isotope dilution provides an accurate and precise measure of both the nutritional state and the response to nutritional support. A multiple isotope dilution technique has been developed that permits measurement of the three major components of body composition: body fat, extracellular mass (ECM), and body cell mass (BCM). Normal body composition was defined by data obtained in 25 healthy volunteers. Malnutrition is characterized by a loss of BCM and an expansion of the ECM, and as a result the lean body mass is not significantly different from normal. The loss of body weight with malnutrition therefore often reflects the loss of body fat. The utility of body composition measurements was demonstrated by determining the effect of total parenteral nutrition on body composition to determine the relationship between caloric intake and the change in the BCM. A statistically significant relationship was developed which demonstrated that a caloric intake in the range of 30-40 cal/kg/day is required for maintenance. To restore a depleted or malnourished BCM requires a caloric intake in excess of that required for maintenance. The measurement of body composition by multiple isotope dilution is complex and time consuming, and requires specialized laboratory facilities and specially trained personnel. As a result, these measurements are not suited for routine patient management, but should rather be reserved for research purposes

Competitiveness Improvement Project Informational Workshop

Energy Technology Data Exchange (ETDEWEB)

Sinclair, Karin C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Preus, Robert W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Dana, Scott [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Van Dam, Jeroen J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Damiani, Rick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jackson, Kyndall R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baring-Gould, Edward I [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jain, Anant [Intertek

2018-02-27

This presentation was given at the Competitiveness Improvement Project (CIP) Informational Workshop on December 6, 2017. Topics covered during the workshop include an overview of the CIP, past projects, scoring criteria, technical support opportunities, certification body requirements, standards applicable to distributed wind generators, information on the National Electric Code, certification testing requirements, test site requirements, National Environmental Policy Act, design review, levelized cost of energy, procurement/contracting, project management/deliverables, and outreach materials.

Static Equilibrium Configurations of Charged Metallic Bodies

African Journals Online (AJOL)

Key words: Static equilibrium, charged metallic body, potential energy, projected gradient method. ... television, radio, internet, microwave ovens, mobile telephones, satellite communication systems, radar systems, electrical motors, electrical.

The problem of defining the limits of protected areas in Ukraine regarding to the sustainable land management

Directory of Open Access Journals (Sweden)

Б. В. Даниленко

2015-11-01

Full Text Available Nowadays all over the world new protected areas are being created. In Ukraine this process is developed within European programs. During the years of independence many new protected areas were created. Large amount of them were included in so called Ukrainian ecological network that ought to be built in 2015. This network is connected with the European ecological network. The governmental reports show high level of the execution of the programs of developing of the protected areas. But in reality we can see that many of new protected areas do not have the determined limits. This results in dangerous human occupation of such lands. Businessmen understand that occupation will be impossible soon. And they think that such protected areas are proclaimed but yet not really exist. And most of Ukrainian courts agree with this. Recent research and publications analyses. Research of management of protected areas through legal means in Ukraine was made by many Ukrainian scientists (V.I. Andreytsev, A.P. Hetman, M.V. Shulga, P.F. Kulynich, A.M. Myroshnychenko and others. At the same time the scientists have not paid enough attention to the problem of defining the limits of protected areas which is now really a great legal problem in Ukraine. Paper objective is the legal problem of defining the limits of protected areas in Ukraine regarding to the sustainable land management. Paper main body. Generally, protected areas are understood to be those in which human occupation or at least the exploitation of resources is limited. The definition that has been widely accepted across regional and global frameworks has been provided by the International Union for Conservation of Nature (IUCN in its categorization guidelines for protected areas. The definition is as follows: "A clearly defined geographical space, recognized, dedicated and managed, through legal or other effective means, to achieve the long-term conservation of nature with associated ecosystem services

Equi-axed and columnar grain growth in UO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

White, R J [Berkely Technology Centre, Nuclear Electric plc, Berkeley (United Kingdom)

1997-08-01

The grain size of UO{sub 2} is an important parameter in the actual performance and the modelling of the performance of reactor fuel elements. Many processes depend critically on the grain size, for example, the degree of initial densification, the evolution rate of stable fission gases, the release rates of radiologically hazardous fission products, the fission gas bubble swelling rates and the fuel creep. Many of these processes are thermally activated and further impact on the fuel thermal behavior thus creating complex feedback processes. In order to model the fuel performance accurately it is necessary to model the evolution of the fuel grain radius. When UO{sub 2} is irradiated, the fission gases xenon and krypton are created from the fissioning uranium nucleus. At high temperatures these gases diffuse rapidly to the grain boundaries where they nucleate immobile lenticular shaped fission gas bubbles. In this paper the Hillert grain growth model is adapted to account for the inhibiting ``Zener`` effects of grain boundary fission gas porosity on grain boundary mobility and hence grain growth. It is shown that normal grain growth ceases at relatively low levels of irradiation. At high burnups, high temperatures and in regions of high temperature gradients, columnar grain growth is often observed, in some cases extending over more than fifty percent of the fuel radius. The model is further extended to account for the de-pinning of grains in the radial direction by the thermal gradient induced force on a fission gas grain boundary bubble. The observed columnar/equi-axed boundary is in fair agreement with the predictions of an evaporation/condensation model. The grain growth model described in this paper requires information concerning the scale of grain boundary porosity, the local fuel temperature and the local temperature gradient. The model is currently used in the Nuclear Electric version of the ENIGMA fuel modelling code. (author). 14 refs, 3 figs, 1 tab.

Error Free Software

Science.gov (United States)

1985-01-01

A mathematical theory for development of "higher order" software to catch computer mistakes resulted from a Johnson Space Center contract for Apollo spacecraft navigation. Two women who were involved in the project formed Higher Order Software, Inc. to develop and market the system of error analysis and correction. They designed software which is logically error-free, which, in one instance, was found to increase productivity by 600%. USE.IT defines its objectives using AXES -- a user can write in English and the system converts to computer languages. It is employed by several large corporations.

Benefits From R and D For D and D Projects Preparation

International Nuclear Information System (INIS)

Georges, Christine; Boucher, Lionel; Charton, Frederic; Soulabaille, Yves

2016-01-01

CEA (French Alternative Energies and Atomic Energy Commission) is both the operator of important nuclear facilities all over the nuclear cycle, in charge of major new built or Decommissioning and Dismantling (D and D) projects and a R and D group with dynamic policy of technology transfer. The position of CEA in D and D is unique because of the number and the wide diversity of facilities under decommissioning, with some high level of contamination. Innovative solutions are being developed in 6 main axes to protect the operators, to minimize the overall costs and the volumes of waste, especially used when preparing D and D operations: Investigations in the facilities, Radiological measurement of waste, Technologies for hostile environment, Decontamination of soils and structures, Waste treatment and conditioning and Methods and Information Technology (IT) Tools for project and waste management. The last developments are shown and examples of industrial applications given. CEA is willing to share actions in partnership with other operators or with industrials dealing with the same problems to solve. (authors)

Tailoring Small IT Projects in the Project Planning Phase

Science.gov (United States)

Mulhearn, Michael F.

2011-01-01

Project management (PM) and systems engineering (SE) are essential skills in information technology (IT). There is an abundance of information available detailing the comprehensive bodies of knowledge, standards, and best practices. Despite the volume of information, there is surprisingly little information about how to tailor PM and SE tasks for…

The Willed Body Donor Interview Project: Medical Student and Donor Expectations

Science.gov (United States)

Bohl, Michael; Holman, Alexis; Mueller, Dean A.; Gruppen, Larry D.; Hildebrandt, Sabine

2013-01-01

The Anatomical Donations Program at the University of Michigan Medical School (UMMS) has begun a multiphase project wherein interviews of donors will be recorded and later shown to medical students who participate in the anatomical dissection course. The first phase of this project included surveys of both current UMMS medical students and donors…

A morphospace for reef fishes: elongation is the dominant axis of body shape evolution.

Directory of Open Access Journals (Sweden)

Thomas Claverie

Full Text Available Tropical reef fishes are widely regarded as being perhaps the most morphologically diverse vertebrate assemblage on earth, yet much remains to be discovered about the scope and patterns of this diversity. We created a morphospace of 2,939 species spanning 56 families of tropical Indo-Pacific reef fishes and established the primary axes of body shape variation, the phylogenetic consistency of these patterns, and whether dominant patterns of shape change can be accomplished by diverse underlying changes. Principal component analysis showed a major axis of shape variation that contrasts deep-bodied species with slender, elongate forms. Furthermore, using custom methods to compare the elongation vector (axis that maximizes elongation deformation and the main vector of shape variation (first principal component for each family in the morphospace, we showed that two thirds of the families diversify along an axis of body elongation. Finally, a comparative analysis using a principal coordinate analysis based on the angles among first principal component vectors of each family shape showed that families accomplish changes in elongation with a wide range of underlying modifications. Some groups such as Pomacentridae and Lethrinidae undergo decreases in body depth with proportional increases in all body regions, while other families show disproportionate changes in the length of the head (e.g., Labridae, the trunk or caudal region in all combinations (e.g., Pempheridae and Pinguipedidae. In conclusion, we found that evolutionary changes in body shape along an axis of elongation dominates diversification in reef fishes. Changes in shape on this axis are thought to have immediate implications for swimming performance, defense from gape limited predators, suction feeding performance and access to some highly specialized habitats. The morphological modifications that underlie changes in elongation are highly diverse, suggesting a role for a range of

A Morphospace for Reef Fishes: Elongation Is the Dominant Axis of Body Shape Evolution

Science.gov (United States)

Claverie, Thomas; Wainwright, Peter C.

2014-01-01

Tropical reef fishes are widely regarded as being perhaps the most morphologically diverse vertebrate assemblage on earth, yet much remains to be discovered about the scope and patterns of this diversity. We created a morphospace of 2,939 species spanning 56 families of tropical Indo-Pacific reef fishes and established the primary axes of body shape variation, the phylogenetic consistency of these patterns, and whether dominant patterns of shape change can be accomplished by diverse underlying changes. Principal component analysis showed a major axis of shape variation that contrasts deep-bodied species with slender, elongate forms. Furthermore, using custom methods to compare the elongation vector (axis that maximizes elongation deformation) and the main vector of shape variation (first principal component) for each family in the morphospace, we showed that two thirds of the families diversify along an axis of body elongation. Finally, a comparative analysis using a principal coordinate analysis based on the angles among first principal component vectors of each family shape showed that families accomplish changes in elongation with a wide range of underlying modifications. Some groups such as Pomacentridae and Lethrinidae undergo decreases in body depth with proportional increases in all body regions, while other families show disproportionate changes in the length of the head (e.g., Labridae), the trunk or caudal region in all combinations (e.g., Pempheridae and Pinguipedidae). In conclusion, we found that evolutionary changes in body shape along an axis of elongation dominates diversification in reef fishes. Changes in shape on this axis are thought to have immediate implications for swimming performance, defense from gape limited predators, suction feeding performance and access to some highly specialized habitats. The morphological modifications that underlie changes in elongation are highly diverse, suggesting a role for a range of developmental processes

The benefits of defining "snacks".

Science.gov (United States)

Hess, Julie M; Slavin, Joanne L

2018-04-18

Whether eating a "snack" is considered a beneficial or detrimental behavior is largely based on how "snack" is defined. The term "snack food" tends to connote energy-dense, nutrient-poor foods high in nutrients to limit (sugar, sodium, and/or saturated fat) like cakes, cookies, chips and other salty snacks, and sugar-sweetened beverages. Eating a "snack food" is often conflated with eating a "snack," however, leading to an overall perception of snacks as a dietary negative. Yet the term "snack" can also refer simply to an eating occasion outside of breakfast, lunch, or dinner. With this definition, the evidence to support health benefits or detriments to eating a "snack" remains unclear, in part because relatively few well-designed studies that specifically focus on the impact of eating frequency on health have been conducted. Despite these inconsistencies and research gaps, in much of the nutrition literature, "snacking" is still referred to as detrimental to health. As discussed in this review, however, there are multiple factors that influence the health impacts of snacking, including the definition of "snack" itself, the motivation to snack, body mass index of snack eaters, and the food selected as a snack. Without a definition of "snack" and a body of research using methodologically rigorous protocols, determining the health impact of eating a "snack" will continue to elude the nutrition research community and prevent the development of evidence-based policies about snacking that support public health. Copyright © 2018 Elsevier Inc. All rights reserved.

VALUES-ORIENTED PROJECT MANAGEMENT OF RENEWABLE ENERGY

Directory of Open Access Journals (Sweden)

Олександр Михайлович ВОЗНИЙ

2017-03-01

Full Text Available The value-oriented approach to project management of renewable energy based on classification stage of the life cycle of products of the projects, adapted to the goals and objectives of information modeling, which allowed to formulate stricter requirements information models used at different stages of the power plant is proposed. A classification of the alternative energy projects, which highlighting areas for activities is proposed. The list of stakeholders that have an impact on alternative energy projects and presented their classification is defined. The value of alternative energy projects considered from the standpoint of a utilitarian approach, using the concept of utility and on the basis of this concept proposed classification values of alternative energy projects. Criteria values as indicators for assessing the value of alternative energy projects and their weights determined by pairwise comparison. To take into account the changes of the value criteria over time proposed to use the key control points value, assessed value criteria in various key points of control, defined indicator of the total value of alternative energy projects. The classification of risks and tools for value-oriented risk management in alternative energy projects is proposed. Further study authors plan to link the development of mechanisms for harmonization value alternative energy projects for their stakeholders.

Feminist identity, body image, and disordered eating

Science.gov (United States)

Borowsky, Hannah M.; Eisenberg, Marla E.; Bucchianeri, Michaela M.; Piran, Niva; Neumark-Sztainer, Dianne

2016-01-01

Using data from a community-based sample (Project EAT-III), this study (N = 1241; mean age = 25.2) examined the relationship of feminist identity with body image and disordered eating. Feminist-identified women reported significantly higher body satisfaction than non-feminist women and women who did not identify as feminists but held feminist beliefs. However, feminist-identified women did not differ from non-feminist women in disordered eating. Women holding feminist beliefs and non-feminist women did not differ in body satisfaction. Our findings suggest that self-identification as a feminist may promote positive body image in young adult women, but may be insufficient to change behaviors. PMID:26694553

Feminist identity, body image, and disordered eating.

Science.gov (United States)

Borowsky, Hannah M; Eisenberg, Marla E; Bucchianeri, Michaela M; Piran, Niva; Neumark-Sztainer, Dianne

2016-01-01

Using data from a community-based sample (Project EAT-III), this study (N = 1241; mean age = 25.2) examined the relationship of feminist identity with body image and disordered eating. Feminist-identified women reported significantly higher body satisfaction than non-feminist women and women who did not identify as feminists but held feminist beliefs. However, feminist-identified women did not differ from non-feminist women in disordered eating. Women holding feminist beliefs and non-feminist women did not differ in body satisfaction. Our findings suggest that self-identification as a feminist may promote positive body image in young adult women, but may be insufficient to change behaviors.

Lipid and liver abnormalities in haemoglobin A1c-defined prediabetes and type 2 diabetes

DEFF Research Database (Denmark)

Calanna, S; Scicali, R; Di Pino, A

2014-01-01

BACKGROUND AND AIMS: We aimed to investigate lipid abnormalities and liver steatosis in patients with HbA1c-defined prediabetes and type 2 diabetes compared to individuals with HbA1c-defined normoglycaemia. METHODS AND RESULTS: Ninety-one subjects with prediabetes according to HbA1c, i.e. from 5...... of the liver, and BARD (body mass index, aspartate aminotransferase/alanine aminotransferase ratio, diabetes) score for evaluation of liver fibrosis, were performed in all subjects. In comparison to controls, subjects with prediabetes were characterised by: lower apolipoprotein AI and HDL cholesterol levels......, higher blood pressure, triglycerides levels and apolipoprotein B/apolipoprotein AI ratio, higher FLI, increased prevalence of and more severe hepatic steatosis, similar BARD score, and higher total body fat mass. In comparison to subjects with diabetes, subjects with prediabetes exhibited: similar blood...

Psychiatric Status across Body Mass Index in a Mediterranean Spanish Population.

Directory of Open Access Journals (Sweden)

Mario Gutiérrez-Bedmar

Full Text Available Mental and body weight disorders are among the major global health challenges, and their comorbidity may play an important role in treatment and prevention of both pathologies. A growing number of studies have examined the relationship between psychiatric status and body weight, but our knowledge is still limited.The present study aims to investigate the cross-sectional relationships of psychiatric status and body mass index (BMI in Málaga, a Mediterranean city in the South of Spain.A total of 563 participants were recruited from those who came to his primary care physician, using a systematic random sampling, non-proportional stratified by BMI categories. Structured clinical interviews were used to assess current Axes-I and II mental disorders according to the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, Text Revision (DSM-IV-TR. BMI was calculated as weight (Kg divided by square of height in meters (m2. Logistic regression was used to investigate the association between BMI and the presence of any mental disorder. BMI was introduced in the models using restricted cubic splines.We found that high BMI values were directly associated with mood and adjustment disorders, and low BMI values were directly associated with avoidant and dependent personality disorders (PDs. We observed an inverse relationship between low BMI values and cluster A PDs. There were not significant relationships between anxiety or substance-related disorders and BMI.Psychiatric status and BMI are related in a Mediterranean Spanish population. A multidisciplinary approach to both pathologies becomes increasingly more necessary.

AVLIS Production Plant Project Management Plan

International Nuclear Information System (INIS)

1984-01-01

The AVLIS Production Plant is designated as a Major System Acquisition (in accordance with DOE Order 4240.IC) to deploy Atomic Vapor Laser Isotope Separation (AVLIS) technology at the Oak Ridge, Tennessee site, in support of the US Uranium Enrichment Program. The AVLIS Production Plant Project will deploy AVLIS technology by performing the design, construction, and startup of a production plant that will meet capacity production requirements of the Uranium Enrichment Program. The AVLIS Production Plant Project Management Plan has been developed to outline plans, baselines, and control systems to be employed in managing the AVLIS Production Plant Project and to define the roles and responsibilities of project participants. Participants will develop and maintain detailed procedures for implementing the management and control systems in agreement with this plan. This baseline document defines the system that measures work performed and costs incurred. This plan was developed by the AVLIS Production Plant Project staff of Martin Marietta Energy Systems, Inc. and Lawrence Livermore National Laboratory in accordance with applicable DOE directives, orders and notices. 38 figures, 19 tables

Body Composition in Relation to Clinical Outcomes in Renal Cell Cancer

NARCIS (Netherlands)

Vrieling, Alina; Kampman, Ellen; Knijnenburg, Nathalja C.; Mulders, Peter F.; Sedelaar, J.P.M.; Baracos, Vickie E.; Kiemeney, Lambertus A.

2016-01-01

Context: Several studies suggest that body composition (ie, body proportions of muscle and fat defined by computed tomography) is associated with clinical outcomes of several cancer types, including renal cell cancer (RCC). Objective: To conduct a systematic review and meta-analysis of the evidence

Associations between Physical Activity and Obesity Defined by Waist-To-Height Ratio and Body Mass Index in the Korean Population.

Science.gov (United States)

Lee, On; Lee, Duck-Chul; Lee, Sukho; Kim, Yeon Soo

2016-01-01

This study investigated the associations between physical activity and the prevalence of obesity determined by waist-to-height ratio (WHtR) and body mass index (BMI). This is the first study to our knowledge on physical activity and obesity using a nationally representative sample of South Korean population from The Korea National Health and Nutrition Examination Survey. We categorized individuals into either non-obese or obese defined by WHtR and BMI. Levels of moderate-to-vigorous physical activity were classified as 'Inactive', 'Active', and 'Very active' groups based on the World Health Organization physical activity guidelines. Multivariable logistic regression was used to examine the associations between physical activity and the prevalence of obesity. Physical activity was significantly associated with a lower prevalence of obesity using both WHtR and BMI. Compared to inactive men, odds ratios (ORs) (95% confidence intervals [CIs]) for obesity by WHtR ≥0.50 were 0.69 (0.53-0.89) in active men and 0.76 (0.63-0.91) in very active men (p for trend = 0.007). The ORs (95% CIs) for obesity by BMI ≥25 kg/m2 were 0.78 (0.59-1.03) in active men and 0.82 (0.67-0.99) in very active men (p for trend = 0.060). The ORs (95% CIs) for obesity by BMI ≥30 kg/m2 were 0.40 (0.15-0.98) in active men and 0.90 (0.52-1.56) in very active men (p for trend = 0.978). Compared to inactive women, the ORs (95% CIs) for obesity by WHtR ≥0.50 were 0.94 (0.75-1.18) in active women and 0.84 (0.71-0.998) in very active women (p for trend = 0.046). However, no significant associations were found between physical activity and obesity by BMI in women. We found more significant associations between physical activity and obesity defined by WHtR than BMI. However, intervention studies are warranted to investigate and compare causal associations between physical activity and different obesity measures in various populations.

MATURITY IN PROJECT MANAGEMENT: A STUDY OF EXISTING PRACTICES IN GOVERNMENT BODIES PERNAMBUCO

Directory of Open Access Journals (Sweden)

Antonio de Souza Silva Júnior

2012-11-01

Full Text Available Targets able to conquer the organization's business strategy give rise to projects that run the organization. And success in managing these projects is related to the skill level of the organization to manage them. With this, organizations need mature in the science and art of project management. This article is a case of study which seeks to identify the level of maturity and the management practices of public institutions in Pernambuco State. Therefore we conducted a quantitative survey to assess the level 2 of the Project Management Maturity Model, proposed by Kerzner (2006, and qualitative research in order to identify the management practices of the projects in the state. It can be concluded that public agencies in the State of Pernambuco did not reach the level 2 (common procedure of maturity in project management. The structured project management approach is not widely used yet. In many projects, the management is done empirically, with little interaction between the stakeholders, with no training for team work and proper risks treatment.

Plutonium immobilization project development and testing technical project office quality assurance program description

International Nuclear Information System (INIS)

Gould, T.H.; MacLean, L.M.; Ziemba, J.M.

1999-01-01

The Plutonium Immobilization Project (PIP) is one of several fissile materials disposition projects managed by the Department of Energy (DOE) Office of Fissile Materials Disposition (OFMD). The PIP is expected to evolve from the current Development and Testing (D and T) effort, to design, to construction, and finally to operations. Overall management and technical management of the D and T effort resides at the Lead Laboratory, Lawrence Livermore National Laboratory (LLNL), through the LLNL Manager, Fissile Materials Disposition Program (FMDP). Day to day project activities are managed by the D and T Technical Project Office (TPO), which reports to the LLNL Manager, FMDP. The D and T TPO consists of the Technical Manager, the TPO Quality Assurance (QA) Program Manager, and TPO Planning and Support Staff. This Quality Assurance Program Description (QAPD) defines the QA policies and controls that will be implemented by these TPO personnel in their management of D and T activities. This QAPD is consistent with and responsive to the Department of Energy Fissile Materials Disposition Program Quality Assurance Requirements Document (FMDP QARD). As the Project and upper level requirement's documents evolve, this QAPD will be updated as necessary to accurately define and describe the QA Program and Management of the PIP. The TPO has a policy that all development and testing activities be planned, performed and assessed in accordance with its customer's requirements, needs and expectations, and with a commitment to excellence and continuous improvement. The TPO QAPD describes implementation requirements which, when completed, will ensure that the project development and testing activities conform to the appropriate QA requirements. For the program to be effective, the TPO QA Program Manager will ensure that each site participating in D and T activities has developed a QAPD, which meets the customer's requirements, and has a designated quality leader in place. These customer

WFIRST Project Science Activities

Science.gov (United States)

Gehrels, Neil

2012-01-01

The WFIRST Project is a joint effort between GSFC and JPL. The project scientists and engineers are working with the community Science Definition Team to define the requirements and initial design of the mission. The objective is to design an observatory that meets the WFIRST science goals of the Astr02010 Decadal Survey for minimum cost. This talk will be a report of recent project activities including requirements flowdown, detector array development, science simulations, mission costing and science outreach. Details of the interim mission design relevant to scientific capabilities will be presented.

Project management: importance for diagnostic laboratories.

Science.gov (United States)

Croxatto, A; Greub, G

2017-07-01

The need for diagnostic laboratories to improve both quality and productivity alongside personnel shortages incite laboratory managers to constantly optimize laboratory workflows, organization, and technology. These continuous modifications of the laboratories should be conducted using efficient project and change management approaches to maximize the opportunities for successful completion of the project. This review aims at presenting a general overview of project management with an emphasis on selected critical aspects. Conventional project management tools and models, such as HERMES, described in the literature, associated personal experience, and educational courses on management have been used to illustrate this review. This review presents general guidelines of project management and highlights their importance for microbiology diagnostic laboratories. As an example, some critical aspects of project management will be illustrated with a project of automation, as experienced at the laboratories of bacteriology and hygiene of the University Hospital of Lausanne. It is important to define clearly beforehand the objective of a project, its perimeter, its costs, and its time frame including precise duration estimates of each step. Then, a project management plan including explanations and descriptions on how to manage, execute, and control the project is necessary to continuously monitor the progression of a project to achieve its defined goals. Moreover, a thorough risk analysis with contingency and mitigation measures should be performed at each phase of a project to minimize the impact of project failures. The increasing complexities of modern laboratories mean clinical microbiologists must use several management tools including project and change management to improve the outcome of major projects and activities. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Introducing a system for automated control of rotation axes, collimator and laser adjustment for a medical linear accelerator

International Nuclear Information System (INIS)

Winkler, Peter; Bergmann, Helmar; Stuecklschweiger, Georg; Guss, Helmuth

2003-01-01

Mechanical stability and precise adjustment of rotation axes, collimator and room lasers are essential for the success of radiotherapy and particularly stereotactic radiosurgery with a linear accelerator. Quality assurance procedures, at present mainly based on visual tests and radiographic film evaluations, should desirably be little time consuming and highly accurate. We present a method based on segmentation and analysis of digital images acquired with an electronic portal imaging device (EPID) that meets these objectives. The method can be employed for routine quality assurance with a square field formed by the built-in collimator jaws as well as with a circular field using an external drill hole collimator. A number of tests, performed to evaluate accuracy and reproducibility of the algorithm, yielded very satisfying results. Studies performed over a period of 18 months prove the applicability of the inspected accelerator for stereotactic radiosurgery

Necessary conditions for tumbling in the rotational motion

Science.gov (United States)

Carrera, Danny H. Z.; Weber, Hans I.

2012-11-01

The goal of this work is the investigation of the necessary conditions for the possible existence of tumbling in rotational motion of rigid bodies. In a stable spinning satellite, tumbling may occur by sufficient strong action of external impulses, when the conical movement characteristic of the stable attitude is de-characterized. For this purpose a methodology is chosen to simplify the study of rotational motions with great amplitude, for example free bodies in space, allowing an extension of the analysis to non-conservative systems. In the case of a satellite in space, the projection of the angular velocity along the principal axes of inertia must be known, defining completely the initial conditions of motion for stability investigations. In this paper, the coordinate systems are established according to the initial condition in order to allow a simple analytical work on the equations of motion. Also it will be proposed the definition of a parameter, calling it tumbling coefficient, to measure the intensity of the tumbling and the amplitude of the motion when crossing limits of stability in the concept of Lyapunov. Tumbling in the motion of bodies in space is not possible when this coefficient is positive. Magnus Triangle representation will be used to represent the geometry of the body, establishing regions of stability/instability for possible initial conditions of motion. In the study of nonconservative systems for an oblate body, one sufficient condition will be enough to assure damped motion, and this condition is checked for a motion damped by viscous torques. This paper seeks to highlight the physical understanding of the phenomena and the influence of various parameters that are important in the process.

Projective block Lanczos algorithm for dense, Hermitian eigensystems

International Nuclear Information System (INIS)

Webster, F.; Lo, G.C.

1996-01-01

Projection operators are used to effect open-quotes deflation by restrictionclose quotes and it is argued that this is an optimal Lanczos algorithm for memory minimization. Algorithmic optimization is constrained to dense, Hermitian eigensystems where a significant number of the extreme eigenvectors must be obtained reliably and completely. The defining constraints are operator algebra without a matrix representation and semi-orthogonalization without storage of Krylov vectors. other semi-orthogonalization strategies for Lanczos algorithms and conjugate gradient techniques are evaluated within these constraints. Large scale, sparse, complex numerical experiments are performed on clusters of magnetic dipoles, a quantum many-body system that is not block-diagonalizable. Plane-wave, density functional theory of beryllium clusters provides examples of dense complex eigensystems. Use of preconditioners and spectral transformations is evaluated in a preprocessor prior to a high accuracy self-consistent field calculation. 25 refs., 3 figs., 5 tabs

Seniority in projection operator formalism

International Nuclear Information System (INIS)

Ullah, N.

1976-01-01

It is shown that the concept of seniority can be introduced in projection operator formalism through the use of the operator Q, which has been defined by de-Shalit and Talmi. The usefulness of seniority concept in projection operator formalism is discussed. An example of four nucleons in j=3/2 configuration is given for illustrative purposes

Project studies and engaged scholarship

DEFF Research Database (Denmark)

Geraldi, Joana; Söderlund, Jonas

2016-01-01

and to rejuvenate these research directions. Design/methodology/approach The authors propose the umbrella term: “project studies” to denote the research related to projects and temporary organizing. Project studies is conceived not only as a body of research, but also as a social process embedded in research...... scholars, who’s “job” goes beyond the writing of articles and research applications, and includes shaping discourses of project research, nurturing new project scholars, contributing to project practice and carefully considering the legacy of projects and project studies in society. Originality......Purpose In 2006, the “Rethinking Project Management” network called for a paradigm shift in project research, and proposed five research directions. The directions inspired research and marked a milestone in the development of the field. The purpose of this paper is to reflect on the past decade...

40 CFR 35.930-4 - Project scope.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Project scope. 35.930-4 Section 35.930... STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.930-4 Project scope. The grant agreement must define the scope of the project for which Federal assistance is awarded...

The Little Black Book of Project Management

CERN Document Server

Thomsett, Michael C

2009-01-01

For nearly twenty years, The Little Black Book of Project Management has provided businesspeople everywhere with a quick and effective introduction to project management tools and methodology. The revised and updated third edition reflects the newest techniques, the latest project management software, as well as the most recent changes to the Project Management Body of Knowledge (PMBOK™). Readers will find invaluable strategies for: • Organizing any project • Choosing the project team • Preparing a budget and sticking to it • Scheduling, flowcharting, and controlling a project • Preparing proj

Assessment of the relationship between melatonin, hormones of the pituitary-ovarian, -thyroid and -adrenocortical axes, and osteoprotegerin and its ligand sRANKL in girls with anorexia nervosa

Directory of Open Access Journals (Sweden)

Zofia Ostrowska

2013-05-01

Full Text Available Background: It has been suggested that disturbances in melatonin (MEL secretion might play a role in osteoporosis development in females with anorexia nervosa (AN. It might be hypothesized that changes in the levels of hormones of the pituitary-ovarian, -thyroid and -adrenocortical axes might mediate the potential relationship between MEL and bone tissue.Aim: We investigated whether a relationship existed between MEL and LH, FSH-E2, TSH-FT3, FT4 and ACTH-cortisol axes in girls with AN. We also aimed to establish whether such a relationship might adversely affect the balance of the OPG/sRANKL system.Material/Methods: Eighty-six girls with AN and 21 healthy subjects aged 12.6 to 18.2 years participated in the study. The serum levels of hormones as well as OPG and sRANKL were determined by radioimmunoassay (RIA, immunoradiometric assay (IRMA or enzyme-linked immunosorbent assay (ELISA methods.Discussion: Our study participants with AN showed a significant reduction in body mass and body mass index (BMI, a decrease in LH, E2 and FT3 concentrations, increased MEL concentration at 02.00 hours and increased amplitude between its nocturnal and morning levels (Δ MEL2.00/9.00 as well as an increase in cortisol concentration. These changes were associated with a significant increase of OPG and sRANKL levels and a decrease in the OPG/sRANKL ratio. BMI values correlated positively with LH, FSH, E2, FT3 and the OPG/sRANKL ratio while the correlation between BMI and cortisol was negative. Δ MEL2.00/9.00 correlated positively with cortisol and negatively with LH, FSH, E2, FT3 concentrations and the OPG/sRANKL ratio. A positive correlation was observed between LH, E2 and the OPG/sRANKL ratio as well as between cortisol and sRANKL while the correlation between LH and OPG as well as between cortisol and the OPG/sRANKL ratio was negative. E2 and LH were shown to be significant and independent predictors of Δ MEL2.00/9.00. LH turned out to be a

[The right to know: our bodies, our history].

Science.gov (United States)

Arroba, A

1993-01-01

This work attempts to trace the history of attitudes toward women and their bodies from a feminist perspective, arguing that women in history have always been defined in terms of their sexuality, their sex, and their bodies. Women and nature were defined as inferior to men and the culture created by men. This situation existed throughout history, in one form or another in all countries, and formed a central part of the construction of social, political and cultural significance, especially in western countries. The patriarchal era in which we live has existed for 6000 years. Its institutions, created by men, were ruled by men and described in history by men. But much of the art left behind from the prehistoric era attests to a time when nature and the reproduction of life were venerated. The female body figured in all representations of this era as a powerful and miraculous central subject and not as a controlled and marginalized object. Women's bodies continue to be big business and despite some progress, women are still obliged to struggle against sexual discrimination and increasing day to day violence. It is important for women to know this history for the light it sheds on their present situation.

Support mechanism for a mirrored surface or other arrangement

Science.gov (United States)

Cutburth, Ronald W.

1987-01-01

An adjustment mechanism such as a three point spherical mount for adjustably supporting a planer mirror or other type of arrangement relative to a plane defined by a given pair of intersecting perpendicular axes is disclosed herein. This mechanism includes first means for fixedly supporting the mirror or other arrangement such that the latter is positionable within the plane defined by the given pair of intersecting perpendicular axes. This latter means and the mirror or other such arrangement are supported by second means for limited movement back and forth about either of the intersecting axes. Moreover, this second means supports the first means and the mirror or other arrangement such that the latter is not movable in any other way whereby the point on the mirror or other arrangement coinciding with the intersection of the given axes does not move or float, thereby making the ability to adjust the mirror or other such arrangement more precise and accurate.