#### Sample records for project number drawing

1. Drawing a random number

DEFF Research Database (Denmark)

Wanscher, Jørgen Bundgaard; Sørensen, Majken Vildrik

2006-01-01

Random numbers are used for a great variety of applications in almost any field of computer and economic sciences today. Examples ranges from stock market forecasting in economics, through stochastic traffic modelling in operations research to photon and ray tracing in graphics. The construction...... distributions into others with most of the required characteristics. In essence, a uniform sequence which is transformed into a new sequence with the required distribution. The subject of this article is to consider the well known highly uniform Halton sequence and modifications to it. The intent is to generate...

2. Projective configurations in projectivegeometrical drawings

Directory of Open Access Journals (Sweden)

Ivashchenko Andrey Viktorovich

2015-05-01

Full Text Available The article focuses on the optimization of the earlier discussed computer method of obtaining new forms of polyhedra based on projective geometry drawings (trace Diagrams.While working on getting new multifaceted forms by projective geometry methods based on the well-known models of polyhedra on the first stage of the work it is required to calculate the parameters of projective geometry drawings, and then to build them. This is an often used apparatus of analytical geometry. According to it, at first the parameters of the polyhedron (core system of planes are calculated, then we obtain the equation of the plane of the face of the polyhedron, and finally we obtain the equations of lines the next plane faces on the selected curve plane. At each stage of application such a method requires the use of the algorithms of floating point arithmetic, on the one hand, leads to some loss of accuracy of the results and, on the other hand, the large amount of computer time to perform these operations in comparison with integer arithmetic operations.The proposed method is based on the laws existing between the lines that make up the drawing - the known configurations of projective geometry (complete quadrilaterals, configuration of Desargues, Pappus et al..The authors discussed in detail the analysis procedure of projective geometry drawing and the presence of full quadrilaterals, Desargues and Pappus configurations in it.Since the composition of these configurations is invariant with respect to projective change of the original nucleus, knowing them, you can avoid the calculations when solving the equations for finding direct projective geometry drawing analytically, getting them on the basis of belonging to a particular configuration. So you can get a definite advantage in accuracy of the results, and in the cost of computer time. Finding these basic configurations significantly enriches the set of methods and the use of projective geometry drawings.

3. Number projection method

International Nuclear Information System (INIS)

Kaneko, K.

1987-01-01

A relationship between the number projection and the shell model methods is investigated in the case of a single-j shell. We can find a one-to-one correspondence between the number projected and the shell model states

4. Method for the Drawing of Newman Projections: Understanding ...

hands-on learning/manipula- tives, Newman projections. Method for the Drawing of Newman Projections: Understanding Newman Projections with the Help of Hands. The interconversion between the perspective formulae and. Newman projections is illustrated here. The method describes how students can look at their ...

5. Morphing Planar Graph Drawings with a Polynomial Number of Steps

DEFF Research Database (Denmark)

Alamdari, Soroush; Angelini, Patrizio; Chan, Timothy M.

2013-01-01

In 1944, Cairns proved the following theorem: given any two straight-line planar drawings of a triangulation with the same outer face, there exists a morph (i.e., a continuous transformation) between the two drawings so that the drawing remains straight-line planar at all times. Cairns’s original...

6. BKP and projective Hurwitz numbers

Science.gov (United States)

Natanzon, Sergey M.; Orlov, Aleksandr Yu.

2017-06-01

We consider d-fold branched coverings of the projective plane RP^2 and show that the hypergeometric tau function of the BKP hierarchy of Kac and van de Leur is the generating function for weighted sums of the related Hurwitz numbers. In particular, we get the RP^2 analogues of the CP^1 generating functions proposed by Okounkov and by Goulden and Jackson. Other examples are Hurwitz numbers weighted by the Hall-Littlewood and by the Macdonald polynomials. We also consider integrals of tau functions which generate Hurwitz numbers related to base surfaces with arbitrary Euler characteristics sc {e}, in particular projective Hurwitz numbers sc {e}=1.

7. Drawing a close to the use of human figure drawings as a projective measure of intelligence.

Science.gov (United States)

Imuta, Kana; Scarf, Damian; Pharo, Henry; Hayne, Harlene

2013-01-01

The practice of using children's human figure drawings (HFDs) to assess their intellectual ability is pervasive among psychologists and therapists in many countries. Since the first systematic scoring system for HFDs was published in 1926, their continued popularity has led to the development of several revised versions of the test. Most recently, the Draw-A-Person Intellectual Ability Test for children, adolescents, and adults (DAP:IQ) was published. It is the most up-to-date form of HFD test designed to assess intellectual functioning across a wide age range. In the present study, we assessed the validity of the DAP:IQ as a screening measure of intelligence in both children and adults. In Experiment 1, 100 4- to 5-year-old children completed the DAP:IQ and the Wechsler Preschool and Primary Scale of Intelligence-Third Edition. In Experiment 2, 100 adults completed the DAP:IQ and the Wechsler Abbreviated Scale of Intelligence. In both experiments, we found only weak to modest correlations between scores on the DAP:IQ and the Wechsler tests. Furthermore, when we compared individual's scores on the two tests, the DAP:IQ yielded high false positive and false negative rates when screening for borderline and superior intellectual functioning. Based on these findings, and based on the lack of validity of previous HFD tests, we conclude that practitioners should not rely on HFD tests as a projective measure of intelligence.

8. Drawing a close to the use of human figure drawings as a projective measure of intelligence.

Directory of Open Access Journals (Sweden)

Kana Imuta

Full Text Available The practice of using children's human figure drawings (HFDs to assess their intellectual ability is pervasive among psychologists and therapists in many countries. Since the first systematic scoring system for HFDs was published in 1926, their continued popularity has led to the development of several revised versions of the test. Most recently, the Draw-A-Person Intellectual Ability Test for children, adolescents, and adults (DAP:IQ was published. It is the most up-to-date form of HFD test designed to assess intellectual functioning across a wide age range. In the present study, we assessed the validity of the DAP:IQ as a screening measure of intelligence in both children and adults. In Experiment 1, 100 4- to 5-year-old children completed the DAP:IQ and the Wechsler Preschool and Primary Scale of Intelligence-Third Edition. In Experiment 2, 100 adults completed the DAP:IQ and the Wechsler Abbreviated Scale of Intelligence. In both experiments, we found only weak to modest correlations between scores on the DAP:IQ and the Wechsler tests. Furthermore, when we compared individual's scores on the two tests, the DAP:IQ yielded high false positive and false negative rates when screening for borderline and superior intellectual functioning. Based on these findings, and based on the lack of validity of previous HFD tests, we conclude that practitioners should not rely on HFD tests as a projective measure of intelligence.

9. Drawing a Close to the Use of Human Figure Drawings as a Projective Measure of Intelligence

Science.gov (United States)

Imuta, Kana; Scarf, Damian; Pharo, Henry; Hayne, Harlene

2013-01-01

The practice of using children's human figure drawings (HFDs) to assess their intellectual ability is pervasive among psychologists and therapists in many countries. Since the first systematic scoring system for HFDs was published in 1926, their continued popularity has led to the development of several revised versions of the test. Most recently, the Draw-A-Person Intellectual Ability Test for children, adolescents, and adults (DAP:IQ) was published. It is the most up-to-date form of HFD test designed to assess intellectual functioning across a wide age range. In the present study, we assessed the validity of the DAP:IQ as a screening measure of intelligence in both children and adults. In Experiment 1, 100 4- to 5-year-old children completed the DAP:IQ and the Wechsler Preschool and Primary Scale of Intelligence-Third Edition. In Experiment 2, 100 adults completed the DAP:IQ and the Wechsler Abbreviated Scale of Intelligence. In both experiments, we found only weak to modest correlations between scores on the DAP:IQ and the Wechsler tests. Furthermore, when we compared individual's scores on the two tests, the DAP:IQ yielded high false positive and false negative rates when screening for borderline and superior intellectual functioning. Based on these findings, and based on the lack of validity of previous HFD tests, we conclude that practitioners should not rely on HFD tests as a projective measure of intelligence. PMID:23516590

10. CHILDREN´S DRAWINGS – RESOURCE FOR DEVELOPMENT AND OBSERVATION OF PERCEPTION OF NUMBERS OF CHILDREN

Directory of Open Access Journals (Sweden)

Gabriela Pavlovičová

2011-11-01

Full Text Available Children´s drawing is one of the most appropriate approach to knowing children, their individuality and also their perceptions. Child is not always able to express their thoughts precisely, because their vocabulary is still incomplete and is gained just lately. In our paper we concentrate on drawing as a communication means, with which we can obtain primary numerical conceptions of children. We deal with observation of children’s perceptions of number. We investigate process in which to numerical information the conceptions of numbers are assigned. The numerical information is word three and the child’s drawing is used to mediate the numerical conceptions of children. The activity was realized with the children in the kindergarten. We analyzed draw children’s conceptions of number 3 and created concept map from those drawings.

11. Project Solo; Newsletter Number Twenty.

Science.gov (United States)

Pittsburgh Univ., PA. Project Solo.

Three Project Solo modules are presented. They are designed to teach the concepts of elementary matrix operation, matrix multiplication, and finite-state automata. Together with the module on communication matrices from Newsletter #17 they form a well motivated but structured path to expertise in this area. (JY)

12. Photon number projection using non-number-resolving detectors

International Nuclear Information System (INIS)

Rohde, Peter P; Webb, James G; Huntington, Elanor H; Ralph, Timothy C

2007-01-01

Number-resolving photo-detection is necessary for many quantum optics experiments, especially in the application of entangled state preparation. Several schemes have been proposed for approximating number-resolving photo-detection using non-number-resolving detectors. Such techniques include multi-port detection and time-division multiplexing. We provide a detailed analysis and comparison of different number-resolving detection schemes, with a view to creating a useful reference for experimentalists. We show that the ideal architecture for projective measurements is a function of the detector's dark count and efficiency parameters. We also describe a process for selecting an appropriate topology given actual experimental component parameters

13. TEACHING BASIC ELEMENTS IN TECHNICAL DRAWING – ORTHOGONAL PROJECTIONS

Directory of Open Access Journals (Sweden)

CLINCIU Ramona

2017-05-01

Full Text Available The paper presents applications developed using AutoCAD and 3D Studio MAX programs. These applications are constructed such as to enable, gradually, the development of the spatial abilities of the students and, at the same time, to enable the understanding of the principles for the representation of the orthogonal projections of the parts, as well as for the construction of their axonometric projections.

14. Using Group Drawings Activities to Facilitate the Understanding of Systemic Aspects of Projects

DEFF Research Database (Denmark)

Arantes do Amaral, João Alberto; Hess, Aurélio; Gonçalves, Paulo

2017-01-01

In this article, we present our findings regarding promoting group drawing activities in order to facilitate the learning of systemic aspects of projects. We discuss the approach we used to engage the students and foster learning in our classes. We used group drawing activities in two project...... technique, we followed the five-phased qualitative analysis method, combined with a systems analysis of the data obtained from observation. Five recurrent themes emerged: 1) Making drawings in groups helps content retention and facilitates connections between the concepts explained by the professor; 2...

15. Using Group Drawings Activities to Facilitate the Understanding of the Systemic Aspects of Projects

Directory of Open Access Journals (Sweden)

João Alberto Arantes do Amaral

2017-04-01

Full Text Available In this article, we present our findings regarding promoting group drawing activities in order to facilitate the learning of systemic aspects of projects. We discuss the approach we used to engage the students and foster learning in our classes. We used group drawing activities in two project management undergraduate courses. The courses, which involved 41 students, took place during the second semester of 2016 in a public university in Brazil. We conducted qualitative research, using qualitative observation and focus group interviews. In order to gauge the effects of the use of this educational technique, we followed the five-phased qualitative analysis method, combined with a systems analysis of the data obtained from observation. Five recurrent themes emerged: 1 Making drawings in groups helps content retention and facilitates connections between the concepts explained by the professor; 2 Making drawings in groups promotes knowledge sharing among team members; 3 Making drawings in group fosters creativity and communication between students; 4 Drawing in groups reduces the students’ boredom, makes the lecture more dynamic and interesting; 5 Drawing in groups reinforces bonds between students. Our systems analysis suggests that group drawing improves student participation in classroom activities, strengthens bonds between students, and enhances learning.

16. Encountering Drawing

Science.gov (United States)

Gregory, Nuala

2017-01-01

This article divides into two roughly equal parts, both of which aim to address the "act" rather than the "art" of drawing. The second part focuses on a theoretical discussion of drawing. The first bears on a number of themes including the role of drawing in colonial history, drawing and data collection, and drawing and memory.…

17. Mechanical drawing

Energy Technology Data Exchange (ETDEWEB)

Cho, Ho Seon; Lee, Geun Hui

2004-04-15

This book deals with how to read and draw the mechanical drawing, which includes the basic of drawing like purpose, kinds, and criterion, projection, special projection drawing, omission of the figure, section, and types of section, dimensioning method, writing way of allowable limit size, tolerance of regular size, parts list and assembling drawing, fitting, mechanical elements like screw, key, pin, rivet, spring, bearing, pipe, valve, welding, geometric tolerance and mechanical materials.

18. Descriptive and Computer Aided Drawing Perspective on an Unfolded Polyhedral Projection Surface

Science.gov (United States)

Dzwierzynska, Jolanta

2017-10-01

The aim of the herby study is to develop a method of direct and practical mapping of perspective on an unfolded prism polyhedral projection surface. The considered perspective representation is a rectilinear central projection onto a surface composed of several flat elements. In the paper two descriptive methods of drawing perspective are presented: direct and indirect. The graphical mapping of the effects of the representation is realized directly on the unfolded flat projection surface. That is due to the projective and graphical connection between points displayed on the polyhedral background and their counterparts received on the unfolded flat surface. For a significant improvement of the construction of line, analytical algorithms are formulated. They draw a perspective image of a segment of line passing through two different points determined by their coordinates in a spatial coordinate system of axis x, y, z. Compared to other perspective construction methods that use information about points, for computer vision and the computer aided design, our algorithms utilize data about lines, which are applied very often in architectural forms. Possibility of drawing lines in the considered perspective enables drawing an edge perspective image of an architectural object. The application of the changeable base elements of perspective as a horizon height and a station point location enable drawing perspective image from different viewing positions. The analytical algorithms for drawing perspective images are formulated in Mathcad software, however, they can be implemented in the majority of computer graphical packages, which can make drawing perspective more efficient and easier. The representation presented in the paper and the way of its direct mapping on the flat unfolded projection surface can find application in presentation of architectural space in advertisement and art.

19. Approximate particle number projection in hot nuclei

International Nuclear Information System (INIS)

Kosov, D.S.; Vdovin, A.I.

1995-01-01

Heated finite systems like, e.g., hot atomic nuclei have to be described by the canonical partition function. But this is a quite difficult technical problem and, as a rule, the grand canonical partition function is used in the studies. As a result, some shortcomings of the theoretical description appear because of the thermal fluctuations of the number of particles. Moreover, in nuclei with pairing correlations the quantum number fluctuations are introduced by some approximate methods (e.g., by the standard BCS method). The exact particle number projection is very cumbersome and an approximate number projection method for T ≠ 0 basing on the formalism of thermo field dynamics is proposed. The idea of the Lipkin-Nogami method to perform any operator as a series in the number operator powers is used. The system of equations for the coefficients of this expansion is written and the solution of the system in the next approximation after the BCS one is obtained. The method which is of the 'projection after variation' type is applied to a degenerate single j-shell model. 14 refs., 1 tab

20. On the use of polar coordinate system in the projective graphic drawings

Directory of Open Access Journals (Sweden)

Ivashchenko Andrey Viktorovich

2016-11-01

Full Text Available Projective graphics is a polyhedra simulation method, which is based on the use of trace diagrams of initial polyhedron. Previously developed computer software allows using Cartesian coordinates. In some cases it is advisable to use polar coordinate system for description of projective graphics drawings. Using the example of icosahedron the authors analyzed the advantages of using projective graphics drawings in the polar coordinate system. The transition to the polar coordinate system is a tool that allows using certain patterns of projective graphics drawings in the process of calculation. When using polar coordinate system the search of Polar correspondence for the directs is simplified. In order to analyze the two lines in the polar coordinate system it is enough to compare the corresponding coefficients of the equations of these lines. The authors consider a diagram of the icosahedron in polar coordinates, and a corresponding fragment of calculation program in the Mathematica system. Some examples of forming based on icosahedrons are offered. Optimization of computer programs using polar coordinate system will simplifies the calculations of projective graphics drawings, accelerates the process of constructing three-dimensional models, which expand the possibilities of selecting original solutions. Finally, the authors conclude that it is appropriate to use the polar coordinate system only in the construction of projective graphics diagrams of the planes system having rich symmetry. All Platonic and Archimedean solids, Catalan solid possess this property.

1. Fabrication drawings of fuel pins for FUJI project among PSI, JNC and NRG. Revised version 2

International Nuclear Information System (INIS)

Ozawa, Takayuki; Nakazawa, Hiroaki; Abe, Tomoyuki; Nagayama, Masahiro

2002-10-01

Irradiation tests and post-irradiation examinations in the framework of JNC-PSI-NRG collaboration project will be performed in 2003-2005. Irradiation fuel pins will be fabricated by the middle of 2003. The fabrication procedure for irradiation fuel pins has been started in 2001. Several fabrication tests and qualification tests in JNC and PSI (Paul Scherrer Institut, Switzerland) have been performed before the fuel pin fabrication. According to the design assignment between PSI and JNC in the frame of this project, PSI should make specification documents for the fuel pellet, the sphere-pac fuel particles, the vipac fuel fragments, and the fuel segment fabrication. JNC should make the fabrication drawings for irradiation pins. JNC has been performed the fuel design in cooperation with PSI and NRG (Nuclear Research and Consultancy Group, Holland). In this project, the pelletized fuel, the sphere-pac fuel, and the vipac fuel will be simultaneously irradiated on HFR (High Flux Reactor, Holland). The fabrication drawings have been made under the design assignment with PSI, and consist of the drawings of MOX pellet, thermal insulator pellet, pin components, fuel segments, and the constructed pin. The fabrication drawings were approved in October 2001, but after that, the optimization of specifications was discussed and agreed among all partners. According to this agreement, the fabrication drawings were revised in January 2002. After the earlier revision, the shape of particle retainer to be made by PSI was modified from its drawing beforehand delivered. In this report, the fabrication drawings revised again will be shown, and the fabrication procedure (welding Qualification Tests) will be modified in accordance with the result of discussion on the 3rd technical meeting held in September 2002. These design works have been performed in Fuel Design and Evaluation Group, Plutonium Fuel Fabrication Division, Plutonium Fuel Center under the commission of Plutonium Fuel

2. Children's Drawings--Resource for Development and Observation of Perception of Numbers of Children

Science.gov (United States)

Pavlovicová, Gabriela; Švecová, Valéria

2011-01-01

Children's drawings are one of the most appropriate approach to knowing children, their individuality and also their perceptions. Child is not always able to express their thoughts precisely, because their vocabulary is still incomplete and is gained just lately. In our paper we concentrate on drawing as a communication means, with which we can…

3. 77 FR 9231 - Lock+ Hydro Friends Fund XXVIII; FFP Project 59, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-16

...+ Hydro Friends Fund XXVIII; FFP Project 59, LLC; Notice Announcing Preliminary Permit Drawing The... of the Commission, or her designee, will conduct a random drawing to determine the filing priority of... applications as provided in section 4.37 of its regulations.\\2\\ The priority established by this drawing will...

4. 77 FR 9231 - Lock+ Hydro Friends Fund XL; FFP Project 56, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-16

...+ Hydro Friends Fund XL; FFP Project 56, LLC; Notice Announcing Preliminary Permit Drawing The Commission..., or her designee, will conduct a random drawing to determine the filing priority of the applicants... section 4.37 of its regulations.\\2\\ The priority established by this drawing will be used to determine...

5. 77 FR 9230 - Lock+ Hydro Friends Fund XLV; FFP Project 2, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-16

...+ Hydro Friends Fund XLV; FFP Project 2, LLC; Notice Announcing Preliminary Permit Drawing The Commission... her designee, will conduct a random drawing to determine the filing priority of the applicants... section 4.37 of its regulations.\\2\\ The priority established by this drawing will be used to determine...

6. 77 FR 9231 - Lock+ Hydro Friends Fund IV; FFP Project 55, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-16

...+ Hydro Friends Fund IV; FFP Project 55, LLC; Notice Announcing Preliminary Permit Drawing The Commission... of the Commission, or her designee, will conduct a random drawing to determine the filing priority of... applications as provided in section 4.37 of its regulations.\\2\\ The priority established by this drawing will...

7. 77 FR 9230 - Lock+ Hydro Friends Fund XLIII; FFP Project 53, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-16

...+ Hydro Friends Fund XLIII; FFP Project 53, LLC; Notice Announcing Preliminary Permit Drawing The... Commission, or her designee, will conduct a random drawing to determine the filing priority of the applicants... section 4.37 of its regulations.\\2\\ The priority established by this drawing will be used to determine...

8. 77 FR 9232 - Lock+ Hydro Friends Fund XXXVIII; FFP Project 1, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-16

...+ Hydro Friends Fund XXXVIII; FFP Project 1, LLC; Notice Announcing Preliminary Permit Drawing The..., or her designee, will conduct a random drawing to determine the filing priority of the applicants... section 4.37 of its regulations.\\2\\ The priority established by this drawing will be used to determine...

9. 77 FR 10740 - Riverbank Hydro No. 22, LLC; FFP Project 93, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-23

...] Riverbank Hydro No. 22, LLC; FFP Project 93, LLC; Notice Announcing Preliminary Permit Drawing The..., will conduct a random drawing to determine the filing priority of the applicants identified in this... regulations.\\2\\ The priority established by this drawing will be used to determine which applicant, among...

10. Digitizing geographic data with GRIDOT; a generalized program for drawing overlay grids in various map projections

International Nuclear Information System (INIS)

Edwards, R.G.; Durfee, R.C.

1976-09-01

The GRIDOT computer program draws overlay grids on a Calcomp plotter for use in digitizing information from maps, rectified aerial photographs, and other sources of spatially distributed data related to regional environmental problems. The options of the program facilitate use of the overlays with standard maps and map projections of the continental United States. The overlay grid may be defined as a latitude-longitude grid (geodetic grid), a Universal Transverse Mercator Grid, or one of the standard state-plane coordinate system grids. The map for which the overlay is intended may be in an Albers Equal Area projection, a Lambert Conformal projection, a Polyconic projection, a Transverse Mercator projection, a Universal Transverse Mercator projection, or any of the standard state-plane projections

11. Structure evolution and mechanical behavior of poly(ethylene terephthalate fibers drawn at different number of drawing stages

Directory of Open Access Journals (Sweden)

Haji Aminoddin

2012-01-01

Full Text Available In this work, the structure, mechanical and thermal properties of PET fiber obtained by hot multi-stage drawing have been investigated in terms of their dependence on the number of drawing steps at an equivalent total draw ratio. Differential scanning calorimetry, birefringence, wide-angle x-ray diffraction, FTIR spectroscopy, tensile properties, and taut-tie molecules were used to characterize the fine structure and physical properties of the fibers. Results have been explained in terms of a higher drawing residence time at an equivalent drawing speed. For single stage drawn fiber, a high tensile strength is obtained, whereas a high initial modulus is obtained for fiber drawn at three-stage drawing. According to the results, an important finding is that three-stage drawing process has the potential to produce high-modulus fibers. The enhanced fraction of taut-tie molecules is found in three-stage drawn fiber, which is believed to be one of the important factors leading to the high modulus achieved in fibers drawn in hot multistage.

12. Fabrication drawings of fuel pins for FUJI project among PSI, JNC and NRG. Revised version

International Nuclear Information System (INIS)

Ozawa, Takayuki; Nakazawa, Hiroaki; Abe, Tomoyuki; Nagayama, Masahiro

2002-02-01

Irradiation tests and post-irradiation examinations in the framework of JNC-PSI-NRG collaboration project will be performed in 2003-2005. Irradiation fuel pins will be fabricated by the middle of 2003. The fabrication procedure for irradiation fuel pins has been started in 2001. Several fabrication tests and qualification tests in JNC and PSI (Paul Scherrer Institute, Switzerland) have been performed before the fuel pin fabrication. According to the design assignment between PSI and JNC in the frame of this project, PSI should make a specification document for the fuel pellet, the sphere-pac fuel particles, the vipac fuel particles, and the fuel pin. JNC should make a fabrication drawing for irradiation pins. JNC has been performed the fuel design in cooperation with PSI and NRG (Nuclear Research and Consultancy Group, Netherlands). In this project, the pelletized fuel, the sphere-pac fuel, and the vipac fuel will be simultaneously irradiated on HFR (High Flux Reactor, Netherlands). This fabrication drawing has been made under the design assignment with PSI, and consists of the drawing of MOX pellet, thermal insulator pellet, pin components, fuel segments, and the constructed pin. The fabrication drawings were approved in October 2001, but after that, the optimization of specifications has been discussed and agreed among all partners. In this report, the revised fabrication drawings will be shown. Based on the commission of Plutonium Fuel Technology Group, Advanced Fuel Recycle Technology Division, this design work has been performed in Fuel Design and Evaluation Group, Plutonium Fuel Fabrication Division, Plutonium Fuel Center. (author)

13. Carlo Fontana and the project drawings of the Tolomei college in Siena

Directory of Open Access Journals (Sweden)

Bruno Mussari

2016-06-01

The drawings are conserved in the British Library in London and are inside one of the 24 volumes bought by James Adam, for King George III, in 1762, from the collection of Cardinal Albani. Drawings of Siena, dating from the late 1670s and early 1680s, illustrate a project by Carlo Fontana for the new building of the Tolomei College in Siena. The project, which was never realised, is in any way significant. It enriches the catalogue of the Ticinese architect and shows the approach of Fontana in the context of Senese architectural, that was traditionally very tied to medieval tradition. Different architectural forms and styles were also introduced into Siena, following a path driven by the Roman academic circles, leaving tangible testimonies in many interventions in the Tuscan city from the first half of the eighteenth century.   key words: carlo Fontana, Siena, Tolomei College, Design

14. Peculiarities of emotional sphere in orphans: analysis through projective drawing test

Directory of Open Access Journals (Sweden)

Vetoshkina S.A.

2015-06-01

Full Text Available The article provides an analysis of the foreign and national literature in the area of formation and functioning of the orphans’ emotional sphere. The specific conditions in which the development of this category of children occurs ("deprivation" and "non-maternal care" are regarded as a determinant of deviation in the emotional status of children brought up in institutions. The article also contains preliminary data of the author's own research, aimed at studying of features of orphans’ emotional sphere with the help of drawing projective techniques, which are further compared to the data obtained in foreign studies.

OpenAIRE

Burgoyne, Greig

2016-01-01

"Only when we move do we see the chains" - Rosa Luxemburg Bad drawing / paper cell is a site-specific drawing performance commissioned for The Prison Drawing Project, Scarborough jail, Yorkshire, presented as a film grafted onto the space that is the cell. It takes the notion of drawing as an act of covering and form of measurement, in an immersive act of attempted liberation. Measuring using rolls of paper, the film chronicles what could be seen as a bad day wallpapering a space, no ass...

16. Projective Drawings of Mothers and Children Exposed to Intimate Partner Violence: A Mixed Methods Analysis

Science.gov (United States)

Backos, Amy; Samuelson, Kristin W.

2017-01-01

The Kinetic Family Drawing (KFD) and the Draw-A-Person: Screening Procedure for Emotional Disturbance (DAP:SPED) are intended to facilitate therapeutic discussion and assess emotional disturbance; however, little research exists on their use with victims of trauma or for identifying posttraumatic stress disorder (PTSD). This study examined…

17. Expression of pain and distress in children during dental extractions through drawings as a projective measure: A clinical study.

Science.gov (United States)

Pala, Sai Priya; Nuvvula, Sivakumar; Kamatham, Rekhalakshmi

2016-02-08

To evaluate the efficacy of drawings as a projective measure of pain and distress in children undergoing dental extractions. Children in the age range of 4-13 years with existence of untreatable caries or over-retained primary teeth, indicated for extractions were included. Pain was assessed using one behavioral [faces, legs, activity, cry and consolability (FLACC)] scale; and a self report measure; faces pain scale-revised (FPS-R), at two points of time, after completion of local anesthetic administration and after extraction. The general behavior of children was assessed with Wright's modification of Frankl rating scale. At the end of the session, children were instructed to represent, themselves along with the dentist and their experiences of the dental treatment through drawing. The drawings were scored utilizing Child drawing: Hospital scale (CD: H) manual and correlated with FLACC, FPS-R and Frankl using Pearson correlation test. A positive correlation, though statistically not significant, was observed between CD: H scores and all other considered parameters (Frankl, FPS-R and FLACC) in the present study. Drawings could not act as surrogate measure of child's pain; however, they acted as a narrative of his/her experiences and reflection of inner emotions. Hence, drawings can be used as an additional dental armamentarium.

18. Expression of pain and distress in children during dental extractions through drawings as a projective measure: A clinical study

Science.gov (United States)

Pala, Sai Priya; Nuvvula, Sivakumar; Kamatham, Rekhalakshmi

2016-01-01

AIM: To evaluate the efficacy of drawings as a projective measure of pain and distress in children undergoing dental extractions. METHODS: Children in the age range of 4-13 years with existence of untreatable caries or over-retained primary teeth, indicated for extractions were included. Pain was assessed using one behavioral [faces, legs, activity, cry and consolability (FLACC)] scale; and a self report measure; faces pain scale-revised (FPS-R), at two points of time, after completion of local anesthetic administration and after extraction. The general behavior of children was assessed with Wright’s modification of Frankl rating scale. At the end of the session, children were instructed to represent, themselves along with the dentist and their experiences of the dental treatment through drawing. The drawings were scored utilizing Child drawing: Hospital scale (CD: H) manual and correlated with FLACC, FPS-R and Frankl using Pearson correlation test. RESULTS: A positive correlation, though statistically not significant, was observed between CD: H scores and all other considered parameters (Frankl, FPS-R and FLACC) in the present study. CONCLUSION: Drawings could not act as surrogate measure of child’s pain; however, they acted as a narrative of his/her experiences and reflection of inner emotions. Hence, drawings can be used as an additional dental armamentarium. PMID:26862509

19. Can drawing be considered a projective measure for children's distress in paediatric dentistry?

Science.gov (United States)

2011-01-01

Several tools have been developed for the measurement of emotional status of the child in paediatric dental clinics including nonverbal self-report techniques. Subjective methods like drawing and Child Drawing: Hospital (CD:H) score have recently been applied in hospitalized children. Studies, however, have not attempted to analyse children's drawings as an aid to investigate the subjective feelings of children in paediatric dental settings. To assess drawing as a measure for child's distress in paediatric dental settings. Fifty-four children, aged 4-11 years, participated in this study. After finishing the first therapeutic session, the child was instructed to draw a picture of a person in a dental clinic. The pictures were scored using CD:H score sheet and the findings were compared with SEM and Frankl scores. CD:H was correlated with both Frankl (correlation coefficient = -0.550) and SEM (correlation coefficient = +0.483) scales (P Drawing is a useful measure of children's emotional status in dental settings in a way that is easier, familiar and more enjoyable for the child patient. © 2010 The Authors. International Journal of Paediatric Dentistry © 2010 BSPD, IAPD and Blackwell Publishing Ltd.

20. Temperature-dependent particle-number projected moment of inertia

International Nuclear Information System (INIS)

Allal, N. H.; Fellah, M.; Benhamouda, N.; Oudih, M. R.

2008-01-01

Expressions of the parallel and perpendicular temperature-dependent particle-number projected nuclear moment of inertia have been established by means of a discrete projection method. They generalize that of the FTBCS method and are well adapted to numerical computation. The effects of particle-number fluctuations have been numerically studied for some even-even actinide nuclei by using the single-particle energies and eigenstates of a deformed Woods-Saxon mean field. It has been shown that the parallel moment of inertia is practically not modified by the use of the projection method. In contrast, the discrepancy between the projected and FTBCS perpendicular moment of inertia values may reach 5%. Moreover, the particle-number fluctuation effects vary not only as a function of the temperature but also as a function of the deformation for a given temperature. This is not the case for the system energy

1. Defense waste solidification studies. Volume 2. Drawing supplement. Savannah River Plant, Project S-1780

International Nuclear Information System (INIS)

1977-01-01

Volume 2 contains the drawings prepared and used in scoping and estimating the Glass-Form Waste Solidification facilities and the alternative studies cited in the report, the Off-Site Shipping Case, the Decontaminated Salt Storage Case, and a revised Reference Plant (Concrete-Form Waste) Case

2. The Importance of Detail and Organization of Technical Drawings for the Project Management

Directory of Open Access Journals (Sweden)

Diego de Avila

2015-11-01

Full Text Available This research takes into account the process of technical improvement through the development and interpretation of technical drawing with the appropriate software. However, it’s known that the technical design, no longer being new in business, tends to effect the production process in a clear and objective way, but there is a concern for the training and use of this standardized form tool. This article presents a case study detailing the use of standardized technical drawing by CAD system and continuously. Seeking to meet the improvement of quality control, production flexibility, reduced costs, documentation and even security, in a company in the northern region of the State of Rio Grande do Sul.

3. Solving for the particle-number-projected HFB wavefunction

International Nuclear Information System (INIS)

Jia, L.Y.

2015-01-01

Recently we proposed a particle-number-conserving theory for nuclear pairing (Jia, 2013) [19] through the generalized density matrix formalism. The relevant equations were solved for the case when each single-particle level has a distinct set of quantum numbers and could only pair with its time-reversed partner (BCS-type Hamiltonian). In this work we consider the more general situation when several single-particle levels could have the same set of quantum numbers and pairing among these levels is allowed (HFB-type Hamiltonian). The pair condensate wavefunction (the HFB wavefunction projected onto good particle number) is determined by the equations of motion for density matrix operators instead of the variation principle. The theory is tested in the simple two-level model with factorizable pairing interactions, and semi-realistic models with the zero-range delta interaction and the realistic Bonn-CD interaction

4. Drawing evaluation report for sampling equipment drawings

International Nuclear Information System (INIS)

WILSON, G.W.

1999-01-01

This document presents the results of a task to evaluate Tank Waste Remediation System (TWRS) sampling equipment drawings and identifies drawings category as either essential, support, or general drawings. This report completes the drawing evaluation task as outlined in Engineering Task Plan For Truck 3 and 4 Drawing Compliance and Evaluation (Wilson, 1997). The scope of this report is limited to an evaluation and identification of drawing category for drawings of certain tank waste sampling equipment for which the TRWS Characterization Project has been assigned custody, including: vapor sampling, grab sampling, auger sampling, and all core sampling equipment (see LMHC Task Order 304). This report does not address drawings for other waste tank deployed equipment systems having similar assigned custody, such as, Light Duty Utility Arm (LDUA), Cone Penetrometer system, or Long Length Contaminated Equipment (LLCE). The LDUA drawings are addressed in the Characterization Equipment Essential Drawings (HNF 1998). The Cone Penetrometer system drawings which are vendor drawings (not H- series) is not currently turned over to operations for deployment. The LLCE equipment was just recently assigned to Characterization Project and were not included in the original scope for this evaluation and will be addressed in the evaluation update scheduled for fiscal year 1999

5. Drawing Inventors

Science.gov (United States)

Szekely, George

2012-01-01

Children are drawing inventors. Their art is certainly not what most adults think of as drawing. Almost instinctively, kids know that drawing is everywhere--that they can draw with almost anything, and that innumerable surfaces can be converted for art use. Teaching drawing is showing interest and enthusiasm for kids' drawing inventions--instead…

6. Drawing from past experience to improve the management of future underground projects

International Nuclear Information System (INIS)

Laughton, Christopher; Fermilab

2004-01-01

The high-energy physics community is currently developing plans to build underground facilities as part of its continuing investigation into the fundamental nature of matter. The tunnels and caverns are being designed to house a new generation of particle accelerators and detectors. For these projects, the cost of constructing the underground facility will constitute a major portion of the told capital cost and project viability can be greatly enhanced by paying careful attention to design and construction practices. A review of recently completed underground physics facilities and related literature has been undertaken to identify some management principles that have proven successful in underground practice. Projects reviewed were constructed in the United States of America and Europe using both Design-Build and more traditional Engineer-Procure-Construct contract formats. Although the physics projects reviewed tend to place relatively strict tolerances on alignment, stability and dryness, their overall requirements are similar to those of other tunnels and it is hoped that some of the principles promoted in this paper will be of value to the owner of any underground project

7. Drawing Evaluation Report for Sampling Equipment Drawings

International Nuclear Information System (INIS)

BOGER, R.M.

1999-01-01

This document presents the results of a task to update the evaluation of River Protection Project (WP) sampling equipment drawings and updates the assigned drawings category as either essential, support, or general drawings. This report updates the drawing evaluation that was originally done per Engineering Task Plan For Truck 3 and 4 Drawing Compliance and Evaluation. The scope of this report is limited to updating the evaluation and identification of drawing category for drawings of certain tank waste sampling equipment for which the RPP Characterization Project has been assigned custody, including: vapor sampling, grab sampling, auger sampling, all core sampling equipment, and Light Duty Utility Arm (LDUA) (see LMHC contract No. 519, release 10). This report does not address drawings for other waste tank deployed equipment systems having similar assigned custody, such as, Cone Penetrometer system, or Long Length Contaminated Equipment (LLCE). The Cone Penetrometer system, which is depicted on vendor drawings, (not H- series), is not currently turned over to operations for deployment. The LLCE equipment was just recently assigned to Characterization Project and was not included in the original scope for this update and will be addressed in the evaluation update scheduled for later in fiscal year 1999, when equipment ownership is determined

8. Thinking Drawing

Science.gov (United States)

2017-01-01

This article draws heavily on the author's critical autobiography: "Eileen Adams: Agent of Change." It presents evidence of the value of drawing as a medium for learning, particularly in art and design, and argues that drawing is a useful educational tool. The premise is that drawing makes you think. This article explains various…

9. 77 FR 9230 - Lock+ Hydro Friends Fund XLVII; FFP Project 52, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-16

... Drawing The Commission has received two preliminary permit applications deemed filed on May 3, 2011, at 8... Secretary of the Commission, or her designee, will conduct a random drawing to determine the filing priority... applications as provided in section 4.37 of its regulations.\\2\\ The priority established by this drawing will...

10. 77 FR 9232 - Lock+ Hydro Friends Fund XXXIV; FFP Project 58, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-16

... Drawing The Commission has received two preliminary permit applications deemed filed on May 3, 2011, at 8... Secretary of the Commission, or her designee, will conduct a random drawing to determine the filing priority... applications as provided in section 4.37 of its regulations.\\2\\ The priority established by this drawing will...

11. 77 FR 10739 - SV Hydro, LLC, Coffeeville, LLC, FFP Project 99, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-23

... Announcing Preliminary Permit Drawing . The Commission has received three preliminary permit applications... Commission, or her designee, will conduct a random drawing to determine the filing priority of the applicants... section 4.37 of its regulations.\\3\\ The priority established by this drawing will be used to determine...

12. 77 FR 9915 - Lock+ Hydro Friends Fund XLIV; FFP Project 51, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-21

... Drawing The Commission has received two preliminary permit applications deemed filed on May 3, 2011, at 8... of the Commission, or her designee, will conduct a random drawing to determine the filing priority of... applications as provided in section 4.37 of its regulations.\\2\\ The priority established by this drawing will...

13. 77 FR 12281 - Lock+ Hydro Friends Fund IV; FFP Project 55, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-29

... Drawing The Commission has received two preliminary permit applications deemed filed on May 3, 2011, at 8... Secretary of the Commission, or her designee, will conduct a random drawing to determine the filing priority... applications as provided in section 4.37 of its regulations.\\3\\ The priority established by this drawing will...

14. 77 FR 9232 - Lock+ Hydro Friends Fund XXXV; FFP Project 57, LLC; Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-16

... Drawing The Commission has received two preliminary permit applications deemed filed on May 3, 2011, at 8... of the Commission, or her designee, will conduct a random drawing to determine the filing priority of... applications as provided in section 4.37 of its regulations.\\2\\ The priority established by this drawing will...

15. Los Alamos Science: The Human Genome Project. Number 20, 1992

Science.gov (United States)

Cooper, N. G.; Shea, N. eds.

1992-01-01

This document provides a broad overview of the Human Genome Project, with particular emphasis on work being done at Los Alamos. It tries to emphasize the scientific aspects of the project, compared to the more speculative information presented in the popular press. There is a brief introduction to modern genetics, including a review of classic work. There is a broad overview of the Genome Project, describing what the project is, what are some of its major five-year goals, what are major technological challenges ahead of the project, and what can the field of biology, as well as society expect to see as benefits from this project. Specific results on the efforts directed at mapping chromosomes 16 and 5 are discussed. A brief introduction to DNA libraries is presented, bearing in mind that Los Alamos has housed such libraries for many years prior to the Genome Project. Information on efforts to do applied computational work related to the project are discussed, as well as experimental efforts to do rapid DNA sequencing by means of single-molecule detection using applied spectroscopic methods. The article introduces the Los Alamos staff which are working on the Genome Project, and concludes with brief discussions on ethical, legal, and social implications of this work; a brief glimpse of genetics as it may be practiced in the next century; and a glossary of relevant terms.

16. Los Alamos Science: The Human Genome Project. Number 20, 1992

Energy Technology Data Exchange (ETDEWEB)

Cooper, N G; Shea, N [eds.

1992-01-01

This article provides a broad overview of the Human Genome Project, with particular emphasis on work being done at Los Alamos. It tries to emphasize the scientific aspects of the project, compared to the more speculative information presented in the popular press. There is a brief introduction to modern genetics, including a review of classic work. There is a broad overview of the Genome Project, describing what the project is, what are some of its major five-year goals, what are major technological challenges ahead of the project, and what can the field of biology, as well as society expect to see as benefits from this project. Specific results on the efforts directed at mapping chromosomes 16 and 5 are discussed. A brief introduction to DNA libraries is presented, bearing in mind that Los Alamos has housed such libraries for many years prior to the Genome Project. Information on efforts to do applied computational work related to the project are discussed, as well as experimental efforts to do rapid DNA sequencing by means of single-molecule detection using applied spectroscopic methods. The article introduces the Los Alamos staff which are working on the Genome Project, and concludes with brief discussions on ethical, legal, and social implications of this work; a brief glimpse of genetics as it may be practiced in the next century; and a glossary of relevant terms.

17. Information, Vol. 1, Number 4. Teacher Corps Dissemination Project Bulletin.

Science.gov (United States)

Rosenau, Fred S., Ed.

Guidelines are provided for disseminating information on teacher corps projects. Information is given on experienced disseminators such as existing networks that are available to help in planning. Suggestions are made on targeting information and marketing. (JD)

18. Reconstruction of tomographic images from projections of a small number of views by means of mathematical programming

International Nuclear Information System (INIS)

Kobayashi, Fujio; Yamaguchi, Shoichiro

1985-01-01

Fundamental studies have been made on the application of mathematical programming to the reconstruction of tomographic images from projections of a small number of views without requiring any circular symmetry nor periodicity. Linear programming and quadratic programming were applied to minimize the quadratic sum of the residue and to finally obtain optimized reconstruction images. The mathematical algorithms were verified by the method of computer simulation, and the relationship between the number of picture elements and the number of iterations necessary for convergence was also investigated. The methods of linear programming and quadratic programming require fairly simple mathematical procedures, and strict solutions can be obtained within a finite number of iterations. Their only draw back is the requirement of a large quantity of computer memory. But this problem will be desolved by the advent of large fast memory devices in the near future. (Aoki, K.)

19. Architectural Drawing

DEFF Research Database (Denmark)

Steinø, Nicolai

2018-01-01

In a time of computer aided design, computer graphics and parametric design tools, the art of architectural drawing is in a state of neglect. But design and drawing are inseparably linked in ways which often go unnoticed. Essentially, it is very difficult, if not impossible, to conceive of a design...... is that computers can represent graphic ideas both faster and better than most medium-skilled draftsmen, drawing in design is not only about representing final designs. In fact, several steps involving the capacity to draw lie before the representation of a final design. Not only is drawing skills an important...... prerequisite for learning about the nature of existing objects and spaces, and thus to build a vocabulary of design. It is also a prerequisite for both reflecting and communicating about design ideas. In this paper, a taxonomy of notation, reflection, communication and presentation drawing is presented...

20. Agile Drawing

DEFF Research Database (Denmark)

Kruse Aagaard, Anders; Lahmy, Maya

2014-01-01

This paper aims to discuss the expanding territory of the architectural drawing through digital fabrication processes and with this angle suggest an experimental practice in research and education. At two workshops held throughout June 2014 this approach and mind-set was presented to 2nd year...... on the correlation between tool and drawing. The output of the workshop is considered one accumulated body of drawings and artefacts, mapping some aspect of the method put forward in a tangible materialised approach....

1. Energy research information system projects report, volume 5, number 1

Science.gov (United States)

Johnson, J.; Schillinger, L.

1980-07-01

The system (ERIS) provides an inventory of the energy related programs and research activities from 1974 to the present in the states of Montana, Nebraska, North Dakota, South Dakota and Wyoming. Areas of research covered include coal, reclamation, water resources, environmental impacts, socioeconomic impacts, energy conversion, mining methodology, petroleum, natural gas, oilshale, renewable energy resources, nuclear energy, energy conservation and land use. Each project description lists title, investigator(s), research institution, sponsor, funding, time frame, location, a descriptive abstract of the research and title reports and/or publications generated by the research. All projects are indexed by location, personal names, organizations and subject keywords.

2. Contracts for field projects and supporting research on enhanced oil recovery. Progress review number 87

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-10-01

Approximately 30 research projects are summarized in this report. Title of the project, contract number, company or university, award amount, principal investigators, objectives, and summary of technical progress are given for each project. Enhanced oil recovery projects include chemical flooding, gas displacement, and thermal recovery. Most of the research projects though are related to geoscience technology and reservoir characterization.

3. Uranium Mill Tailings Remedial Action Project (UMTRAP), Slick Rock, Colorado, Revision 1. Bid schedule, special conditions, specifications, and subcontract drawings

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

This volume contains: bidding requirements; terms and conditions; specifications for Division 1 -- general requirements; specifications for Division 2 -- sitework; specifications for Divisions 5 -- metals; subcontract drawings, (general, Union Carbide processing site, North Continent processing site, and Burro Canyon disposal site).

4. Uranium Mill Tailings Remedial Action Project (UMTRAP), Slick Rock, Colorado, Revision 1. Bid schedule, special conditions, specifications, and subcontract drawings

International Nuclear Information System (INIS)

1995-01-01

This volume contains: bidding requirements; terms and conditions; specifications for Division 1 -- general requirements; specifications for Division 2 -- sitework; specifications for Divisions 5 -- metals; subcontract drawings, (general, Union Carbide processing site, North Continent processing site, and Burro Canyon disposal site)

5. Prize Draw

CERN Multimedia

Staff Association

2014-01-01

Prize draw Go Sport vouchers 393 members of the Staff Association participated in our free prize draw in July where they could win one of the thirty Go Sport vouchers of 50 euros. The thirty winners have been contacted and can come and collect their voucher from the Staff Association Secretariat.

6. Drawing Theory. An Introduction

Directory of Open Access Journals (Sweden)

Stefano Milani

2014-08-01

Full Text Available Nowadays, drawing practices seem to operate in a rather uncertain field that is typical of an in-between phase of disciplinary development and that needs to be addressed, if an ‘anticipated projection’ of the development of drawing is to be attempted. The field of drawing, as practice and discourse, seems to have entered an end-condition, where the celebration of the extensive production of drawings is combined with a certain fatigue in both its understanding and reflection. Even though the role of drawing is nowadays still regarded as the most common act of architecture, this understanding of drawing is hardly subject to critical inquiries, and, unfortunately, mostly limited to its instrumental role within the representation of the project.A common characteristic in all of the papers in this issue of Footprint is that a specific character of the theoretical field generated by drawing is the elaboration of the correlation between two epistemic regions. This singular character probably belongs to drawing’s structural duality of being simultaneously a simulacrum of a reality and reality itself, memory and anticipation, subject and object, by being in essence the measure of two different facets inherent to architectural thinking. Drawing not only gives consistency to the poles, rendering them architectural matter, but also literally (reconstructs them. At the same time, drawing formalizes the theoretical distance between the two.

7. Machine drawing

CERN Document Server

Narayana, KL; Reddy, K Venkata

2006-01-01

About the Book: Written by three distinguished authors with ample academic and teaching experience, this textbook, meant for diploma and degree students of Mechanical Engineering as well as those preparing for AMIE examination, incorporates the latest standards. The new edition includes the features of assembly drawings, part drawings and computer-aided drawings to cater to the needs of students pursuing various courses. The text of the new edition has been thoroughly revised to include new concepts and practices in the subject. It should prove an ideal textbook. Contents: Introduction

8. Repowering analysis: Hanford Generating Project (HGP), Task Order Number 6

International Nuclear Information System (INIS)

1988-12-01

The Hanford Generating Project (HGP), owned by the Washington Public Power Supply System, consists of two low pressure steam turbines, generators, and associated equipment located adjacent to the Department of Energy's (DOE) N-Reactor. HGP has been able to produce approximately 800 MWe with low pressure steam supplied by N-Reactor. DOE has placed N-Reactor in cold standby status for an undetermined length of time. This results in the idling of the HGP since no alternative source of steam is available. Bonneville Power Administration contracted with Fluor Daniel, Inc. to investigate the feasibility and cost of constructing a new source of steam for (repowering) one of the HGP turbines. The steam turbine is currently operated with 135 psia steam. The turbines can be rebuilt to operate with 500 psia steam pressure by adding additional stages, buckets, nozzles, and diaphragms. Because of the low pressure design, this turbine can never achieve the efficiencies possible in new high pressure turbines by the presences of existing equipment reduces the capital cost of a new generating resource. Five repowering options were investigated in this study. Three cases utilizing gas turbine combined cycle steam generation equipment, one case utilizing a gas fired boiler, and a case utilizing a coal fired boiler. This report presents Fluor Daniel's analysis of these repowering options

9. Creativity and Self-Exploration in Projective Drawings of Abused Women: Evaluating the inside Me-outside Me Workshop

Science.gov (United States)

Dollinger, Stephen J.; Kazmierczak, Elzbieta; Storkerson, Peter K.

2011-01-01

This study evaluated a creative workshop where college students (N = 300) devised self-expressive products to explore their inner and outer worlds. Participants devised products with drawing and writing components to examine their relationships with negative life events, self-concepts, and worldviews. Participants then evaluated the workshop.…

10. Drawing Hospital Foodscapes

DEFF Research Database (Denmark)

Tvedebrink, Tenna Doktor Olsen; Fisker, Anna Marie; Kirkegaard, Poul Henning

This poster presents a series of drawings depicting the initial considerations made with the Ph.D. project for an improved ‘Interior Design for Food’ in a Danish hospital ward. The project concerns a study on the ontological and symbolic interrelationship possibly existing between food...

11. Why the Three-Point Rule Failed to Sufficiently Reduce the Number of Draws in Soccer: An Application of Prospect Theory.

Science.gov (United States)

Riedl, Dennis; Heuer, Andreas; Strauss, Bernd

2015-06-01

Incentives guide human behavior by altering the level of external motivation. We apply the idea of loss aversion from prospect theory (Kahneman & Tversky, 1979) to the point reward systems in soccer and investigate the controversial impact of the three-point rule on reducing the fraction of draws in this sport. Making use of the Poisson nature of goal scoring, we compared empirical results with theoretically deduced draw ratios from 24 countries encompassing 20 seasons each (N = 118.148 matches). The rule change yielded a slight reduction in the ratio of draws, but despite adverse incentives, still 18% more matches ended drawn than expected, t(23) = 11.04, p prospect theory assertions. Alternative point systems that manipulated incentives for losses yielded reductions at or below statistical expectation. This provides support for the deduced concept of how arbitrary aims, such as the reduction of draws in the world's soccer leagues, could be more effectively accomplished than currently attempted.

12. Maturity of project management in construction companies with the use of fuzzy numbers

Science.gov (United States)

Klaus-Rosińska, Agata; Kuchta, Dorota

2017-07-01

The main aim of the article is to describe issue of maturity in project management regarding construction companies. Taking into consideration this problem the literature research was made, existing project management maturity models were analyzed, model of maturity in project management (using fuzzy numbers approach) was described and tested. The results of testing stage are shown in the case study.

13. Psychological characteristics of eating disorders as evidenced by the combined administration of questionnaires and two projective methods: the Tree Drawing Test (Baum Test) and the Sentence Completion Test.

Science.gov (United States)

Mizuta, Ichiro; Inoue, Yoichi; Fukunaga, Tomoko; Ishi, Ryohei; Ogawa, Asao; Takeda, Masatoshi

2002-02-01

The objective of this study is to examine psychological/psychopathological characteristics of eating disorders and their subtypes through a combined administration of questionnaires and projective tests. Three questionnaires (Eating Disorder Inventory - 2, Social Adaptation Scale, Southern California University Eating Disorder Inventory - Revised) and two projective tests (the Tree Drawing Test [TDT, Baum Test], and the Sentence Completion Test [SCT]) were administered to 126 female patients between the ages of 15 and 30 years, with eating disorders according to DSM-IV criteria at our outpatient clinic, and to 54 sex- and age-matched control subjects. The purging subtypes of eating disorders (anorexia nervosa - binge-eating/purging type [ANBP] and bulimia nervosa - purging type [BNP]) were clearly differentiated from the controls, both by the questionnaires and the projective tests. Compared with the controls, ANBP/BNP showed more problematic profiles across the three questionnaires, drew smaller and poorer trees in TDT to a more left location on the drawing paper, and gave fewer positive, and more negative responses in SCT. In contrast, few significant differences were found between anorexia nervosa- restricting type (ANR) and the controls, and between ANBP and BNP. As a trend, however, ANR was consistently located between the controls and ANBP/BNP across the whole questionnaires and projective tests.

14. Drawing evaluation report for sampling equipment drawings; TOPICAL

International Nuclear Information System (INIS)

WILSON, G.W.

1999-01-01

This document presents the results of a task to evaluate Tank Waste Remediation System (TWRS) sampling equipment drawings and identifies drawings category as either essential, support, or general drawings. This report completes the drawing evaluation task as outlined in Engineering Task Plan For Truck 3 and 4 Drawing Compliance and Evaluation (Wilson, 1997). The scope of this report is limited to an evaluation and identification of drawing category for drawings of certain tank waste sampling equipment for which the TRWS Characterization Project has been assigned custody, including: vapor sampling, grab sampling, auger sampling, and all core sampling equipment (see LMHC Task Order 304). This report does not address drawings for other waste tank deployed equipment systems having similar assigned custody, such as, Light Duty Utility Arm (LDUA), Cone Penetrometer system, or Long Length Contaminated Equipment (LLCE). The LDUA drawings are addressed in the Characterization Equipment Essential Drawings (HNF 1998). The Cone Penetrometer system drawings which are vendor drawings (not H- series) is not currently turned over to operations for deployment. The LLCE equipment was just recently assigned to Characterization Project and were not included in the original scope for this evaluation and will be addressed in the evaluation update scheduled for fiscal year 1999

15. Drawing images or Architectural drawing

Directory of Open Access Journals (Sweden)

Amparo Bernal López-Sanvicente

2013-10-01

Full Text Available In this article we will discuss how the aesthetic values, that the digital imaging provide, has influenced in drawing and architecture in a historical reading of the evolution of each means of architecture expression. In painting art and photography have been happening genres and styles that have adopted criteria of one or another discipline. When photography became independent from painting as an artistic discipline, its relationship to the architecture affected both the acceptance of its stylistic canon and the broadcast area. With technological development and the emergence of the new concept of digital imaging, it has become an indispensable tool in the whole process of contemporary architecture, which should not contaminate the true sense of the architectural drawing.

16. The Palace of the Prince. Ideas and Architectural Projects from Florentine Experimental Academism to Borromini’s Drawings, with Notes on the Album of Giovanni Vincenzo Casale

Directory of Open Access Journals (Sweden)

Marisa Tabarrini

2014-06-01

17. PARAMETRIC DRAWINGS VS. AUTOLISP

Directory of Open Access Journals (Sweden)

PRUNĂ Liviu

2015-06-01

Full Text Available In this paper the authors make a critical analysis of the advantages offered by the parametric drawing use by comparison with the AutoLISP computer programs used when it comes about the parametric design. Studying and analysing these two work models the authors have got to some ideas and conclusions which should be considered in the moment in that someone must to decide if it is the case to elaborate a software, using the AutoLISP language, or to establish the base rules that must be followed by the drawing, in the idea to construct outlines or blocks which can be used in the projection process.

18. Effects of the particle-number projection on the isovector pairing energy

International Nuclear Information System (INIS)

Allal, N.H.; Fellah, M.; Oudih, M.R.; Benhamouda, N.

2006-01-01

The usual neutron-proton BCS wave function is simultaneously projected on both the good neutron and proton numbers using a discrete projection operator. The projected energy of the system is deduced as a limit of rapidly convergent sequence. It is numerically studied for the N=Z nuclei of which ''experimental'' pairing gaps may be deduced from the experimental odd-even mass differences. It then appears that the particle-number fluctuation effect is even more important than in the case of pairing between like-particles. (orig.)

19. Nobel drawings

CERN Multimedia

Michel Blanc

2009-01-01

1. The Universe in One Drawing (G. Smoot Physics 2006) 2. Superfluid Properties (R. Richardson Physics 1996) 3. The Asymptotic Freedom of the Quark (David Gross, Physics 2004) 4. Understanding Superfluidity (Anthony Legget, Physics 2003) 5. Taming Infinities (G. 't Hooft, Physics 1999) 6. Homo Diagrammaticus (M. Veltman, Physics 1999) 7. A Tale Of Two Liquids (D. Osheroff, Physics 1996) 8. Wire Proliferation (G. Charpak, Physics 1992) 9. High Temperature Superconductivity (G. Bednorz, Physics 1987) 10. Atomic Cuisine (courtesy of C. Rubbia, Physics 1984) 11. Colliding Charm (S. Ting, Physics 1976) 12. The Bubble Chamber ( D. Glaser, Physics 1960) 13. The Narrow Resonance of the J-Psi (B. Richter, Physics 1976) 14. Stochastic Cooling (S. Van der Meer, Physics 1984) 15. The Good Anomaly (J Steinberger, Physics 1988) 16. Quark Somewhere on the White Paper (R. Taylor, Physics 1990) 17. The Tau of Particle Physics (M. Perl, 1995) 18. NMR Spectroscopy (K. Wuethrich, Chemistry 2002) 19. Coherent States (R....

20. The Roles of Emotional Comprehension and Representational Drawing Skill in Children’s Expressive Drawing

OpenAIRE

Brechet, Claire; JOLLEY, Richard

2014-01-01

The purpose of the present study was to investigate the roles of emotional comprehension and representational drawing skill in children’s expressive drawing. Fifty 7- to 10-year-olds were asked to produce two (happy and sad) expressive drawings, two representational drawings (drawing of a man running and drawing of a house) and to answer the Test of Emotion Comprehension (Pons & Harris, 2000). The expressive drawings were assessed on the number of expressive subject matter themes (‘content ex...

1. Pairing vibrational and isospin rotational states in a particle number and isospin projected generator coordinate method

International Nuclear Information System (INIS)

Chen, H.T.; Muether, H.; Faessler, A.

1978-01-01

Pairing vibrational and isospin rotational states are described in different approximations based on particle number and isospin projected, proton-proton, neutron-neutron and proton-neutron pairing wave functions and on the generator coordinate method (GCM). The investigations are performed in models for which an exact group theoretical solution exists. It turns out that a particle number and isospin projection is essential to yield a good approximation to the ground state or isospin yrast state energies. For strong pairing correlations (pairing force constant equal to the single-particle level distance) isospin cranking (-ωTsub(x)) yields with particle number projected pairing wave function also good agreement with the exact energies. GCM wave functions generated by particle number and isospin projected BCS functions with different amounts of pairing correlations yield for the lowest T=0 and T=2 states energies which are practically indistinguishable from the exact solutions. But even the second and third lowest energies of charge-symmetric states are still very reliable. Thus it is concluded that also in realistic cases isospin rotational and pairing vibrational states may be described in the framework of the GCM method with isospin and particle number projected generating wave functions. (Auth.)

2. Bernard Tschumi Draws Architecture!

Directory of Open Access Journals (Sweden)

Gevork Hartoonian

2014-08-01

Full Text Available Bernard Tschumi’s delineation prepared for the Museu de Arte Contemporânea provides the starting point for this essay, which discusses the historicity of drawing and highlights the horizontality and the verticality that structure architecture’s contrast with the pictorial realm. Juxtaposing a freehand sketch with the digital image of the same project, Tschumi moves to address the paradox concerning the position of the body and drawing. This drawing also speaks for the reversal in the position of the body brought about by digital reproductivity.The reversal alludes to Tschumi’s theorization of architecture in terms of space and event. These, I will argue, are anticipated in The Manhattan Transcripts (1981 where a set of freehand drawings is used to evoke a filmic mood wherein the image is projected parallel to the spectator’s seated position. The essay goes further, suggesting that the theatricality permeating the present architecture is part of the shift from horizontality to the painterly, and yet the phenomenon is not merely a technical issue. Rather, it alludes to architecture’s dialogical rapport with painting at work since the Renaissance.

3. Auto Draw from Excel Input Files

Science.gov (United States)

Strauss, Karl F.; Goullioud, Renaud; Cox, Brian; Grimes, James M.

2011-01-01

The design process often involves the use of Excel files during project development. To facilitate communications of the information in the Excel files, drawings are often generated. During the design process, the Excel files are updated often to reflect new input. The problem is that the drawings often lag the updates, often leading to confusion of the current state of the design. The use of this program allows visualization of complex data in a format that is more easily understandable than pages of numbers. Because the graphical output can be updated automatically, the manual labor of diagram drawing can be eliminated. The more frequent update of system diagrams can reduce confusion and reduce errors and is likely to uncover symmetric problems earlier in the design cycle, thus reducing rework and redesign.

4. Optimal Monotone Drawings of Trees

OpenAIRE

He, Dayu; He, Xin

2016-01-01

A monotone drawing of a graph G is a straight-line drawing of G such that, for every pair of vertices u,w in G, there exists abpath P_{uw} in G that is monotone in some direction l_{uw}. (Namely, the order of the orthogonal projections of the vertices of P_{uw} on l_{uw} is the same as the order they appear in P_{uw}.) The problem of finding monotone drawings for trees has been studied in several recent papers. The main focus is to reduce the size of the drawing. Currently, the smallest drawi...

5. Influence of sampling interval and number of projections on the quality of SR-XFMT reconstruction

International Nuclear Information System (INIS)

Deng Biao; Yu Xiaohan; Xu Hongjie

2007-01-01

Synchrotron Radiation based X-ray Fluorescent Microtomography (SR-XFMT) is a nondestructive technique for detecting elemental composition and distribution inside a specimen with high spatial resolution and sensitivity. In this paper, computer simulation of SR-XFMT experiment is performed. The influence of the sampling interval and the number of projections on the quality of SR-XFMT image reconstruction is analyzed. It is found that the sampling interval has greater effect on the quality of reconstruction than the number of projections. (authors)

6. Deterritorializing Drawing - transformation/deformation

DEFF Research Database (Denmark)

Brabrand, Helle

2012-01-01

but also from within by sensations, body ‘images’ are different to all other images. Twisting these body images make a mode of operation of art. The paper will address the above issues discussing modes of operation and appearance of my actual project. Acting in the reality of drawing, the project confront...... the body, situated in real time and depth, with drawing transforming and deforming time and depth....

7. Young Children's Drawings in Problem Solving

Science.gov (United States)

Bakar, Kamariah Abu; Way, Jennifer; Bobis, Janette

2016-01-01

This paper explores young children's drawings (6 years old) in early number and addition activities in Malaysia. Observation, informal interviews and analysis of drawings revealed two types of drawing, and gave insight into the transitional process required for children to utilise drawings in problem solving. We argue the importance of valuing and…

8. Effects of particle-number-projection on nuclear moment of intertia

International Nuclear Information System (INIS)

Rozmej, P.

1976-01-01

The formalism of the moment of inertia in cranking model and BCS theory has been extended for the partially particle-number-projected BCS wave functions. The ground state moments of inertia obtained by this method are a little greater than those calculated by BCS method. A smooth growth of the moments of inertia for diminishing pairing strength constant has been obtained. (author)

9. Draw the Line!

DEFF Research Database (Denmark)

present proceedings from the UPGEM conference "Draw the Line!" in Copenhagen May 2008. The proceedings include contributions by UPGEM researchers, conference speeches by other researchers, politicians and gender equality officers in which they relate their work and research with the research done in UPGEM......Draw the Line! International Conference, Copenhagen 2008 Papers, proceedings and recommendations is the second publication of the international three year long project "Understanding Puzzles in the Gendered European Map" (UPGEM), which is financed by the European Commission. In this publication we....... The UPGEM research has previously been published in national reports from each of the partner countries (Denmark, Estonia, Finland, Italy and Poland). In these individual national reports of universities as workplaces for male and female researchers we discuss scientific cultures in physics embedded...

10. CENRTC Project number-sign 2F3EOA, OCB A-376, acceptance test procedure

International Nuclear Information System (INIS)

Akerson, A.W.

1995-01-01

This test procedure provides the steps necessary to verify correct functional operation of controls, annunciators, alarms, protective relays and related systems impacted by CENRTC number-sign 2F3E0A, Microwave Transfer Trip Project, modification work performed under work package 6B-93-00041/M. This procedure separates three tests into separate sections: energization of A-376 duplex panel and circuits; SCADA tests; and A-376 local trip tests

11. FY 2000 Project report on survey for drawing district energy-saving visions for City of Ginowan; 2000 nendo Ginowan-shi sho energy vision sakutei chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

The Ginowan municipal energy-saving vision drawing committee is established. It is responsible for drawing the energy-saving visions for the city, to study the basic guidelines and promotion measures for energy saving and promote the energy-saving measures suitable for the local characteristics. The studied items include background of and basic guidelines for the plans, analysis of energy consumption, survey on energy-saving consciousness and actual situations, prediction of potentially saved energy, drawing of the basic plans for energy saving and plan implementation programs, and surveys on preceding examples. The action plans include green planning for and revamping of public facilities, green purchasing, energy-saving diagnosis, drawing the design guidelines for energy saving and environmental considerations in public facilities, introduction of low-pollution local transportation systems, drawing the environment-related technology lists, including energy saving, and promotion of clean energy vehicles. (NEDO)

12. Material decomposition in an arbitrary number of dimensions using noise compensating projection

Science.gov (United States)

O'Donnell, Thomas; Halaweish, Ahmed; Cormode, David; Cheheltani, Rabee; Fayad, Zahi A.; Mani, Venkatesh

2017-03-01

Purpose: Multi-energy CT (e.g., dual energy or photon counting) facilitates the identification of certain compounds via data decomposition. However, the standard approach to decomposition (i.e., solving a system of linear equations) fails if - due to noise - a pixel's vector of HU values falls outside the boundary of values describing possible pure or mixed basis materials. Typically, this is addressed by either throwing away those pixels or projecting them onto the closest point on this boundary. However, when acquiring four (or more) energy volumes, the space bounded by three (or more) materials that may be found in the human body (either naturally or through injection) can be quite small. Noise may significantly limit the number of those pixels to be included within. Therefore, projection onto the boundary becomes an important option. But, projection in higher than 3 dimensional space is not possible with standard vector algebra: the cross-product is not defined. Methods: We describe a technique which employs Clifford Algebra to perform projection in an arbitrary number of dimensions. Clifford Algebra describes a manipulation of vectors that incorporates the concepts of addition, subtraction, multiplication, and division. Thereby, vectors may be operated on like scalars forming a true algebra. Results: We tested our approach on a phantom containing inserts of calcium, gadolinium, iodine, gold nanoparticles and mixtures of pairs thereof. Images were acquired on a prototype photon counting CT scanner under a range of threshold combinations. Comparison of the accuracy of different threshold combinations versus ground truth are presented. Conclusions: Material decomposition is possible with three or more materials and four or more energy thresholds using Clifford Algebra projection to mitigate noise.

13. A number-projected model with generalized pairing interaction in application to rotating nuclei

Energy Technology Data Exchange (ETDEWEB)

Satula, W. [Warsaw Univ. (Poland)]|[Joint Institute for Heavy Ion Research, Oak Ridge, TN (United States)]|[Univ. of Tennessee, Knoxville, TN (United States)]|[Royal Institute of Technology, Stockholm (Sweden); Wyss, R. [Royal Institute of Technology, Stockholm (Sweden)

1996-12-31

A cranked mean-field model that takes into account both T=1 and T=0 pairing interactions is presented. The like-particle pairing interaction is described by means of a standard seniority force. The neutron-proton channel includes simultaneously correlations among particles moving in time reversed orbits (T=1) and identical orbits (T=0). The coupling between different pairing channels and nuclear rotation is taken into account selfconsistently. Approximate number-projection is included by means of the Lipkin-Nogami method. The transitions between different pairing phases are discussed as a function of neutron/proton excess, T{sub z}, and rotational frequency, {Dirac_h}{omega}.

14. Linear optics and projective measurements alone suffice to create large-photon-number path entanglement

International Nuclear Information System (INIS)

Lee, Hwang; Kok, Pieter; Dowling, Jonathan P.; Cerf, Nicolas J.

2002-01-01

We propose a method for preparing maximal path entanglement with a definite photon-number N, larger than two, using projective measurements. In contrast with the previously known schemes, our method uses only linear optics. Specifically, we exhibit a way of generating four-photon, path-entangled states of the form vertical bar 4,0>+ vertical bar 0,4>, using only four beam splitters and two detectors. These states are of major interest as a resource for quantum interferometric sensors as well as for optical quantum lithography and quantum holography

15. Number projected statistics and the pairing correlations at high excitation energies

International Nuclear Information System (INIS)

Esebbag, C.; Egido, J.L.

1993-01-01

We analyze the use of particle-number projected statistics (PNPS) as an effective way to include the quantum and statistical fluctuations, associated with the pairing degree of freedom, left out in finite-temperature mean-field theories. As a numerical application the exact-soluble degenerate model is worked out. In particular, we find that the sharp temperature-induced superfluid-normal phase transition, predicted in the mean-field approximations, is washed out in the PNPS. Some approximations as well as the Landau prescription to include statistical fluctuations are also discussed. We find that the Landau prescription provides a reasonable approximation to the PNPS. (orig.)

16. CENRTC Project number-sign 2F3EOA, OCB A-386, acceptance test procedure

International Nuclear Information System (INIS)

Akerson, A.W.

1995-01-01

This test procedure provides the steps necessary to verify correct functional operation of controls, annunciators, alarms, protective relays and related systems impacted by CENRTC number-sign 2F3EOA, Microwave Transfer Trip Project, modification work performed under work package 6B-93-00043/M (CENRTC 2F3EOA MWTT OCB A-386 PACKAGE). This procedure separates four tests into separate sections: Energization of A-386 Duplex Panel and Circuits; Local RFL 6750 function tests and start-up; SCADA tests; and A-386 local trip tests

17. Correlation Between Coupling Metrics Values and Number of Classes in Multimedia Java Projects: A Case Study

Directory of Open Access Journals (Sweden)

V. S. Bivde

2016-09-01

Full Text Available Coupling is an interdependence relationship between the modules of object-oriented software. It is a property with the most influence on quality attributes of the object-oriented software. Coupling with high values results in complex software design hence software professionals try to keep the coupling as low as possible. The values of coupling metrics are dependent on the type of input source code. Reusability is the main feature of object-oriented languages, so coupling occurs due to reuse of code modules. This paper investigates a correlation between the values of coupling metrics and the number of classes in the multimedia Java code. Here, a case study of a banking multimedia Java project with its forty different versions is conducted to comments on this correlation. The analysis of the results shows that, if the input source code is with a large number of classes then it results in high coupling values.

18. Mixed movements/performance-based drawing

DEFF Research Database (Denmark)

Brabrand, Helle

2011-01-01

Mixed Movements is a research project engaged in performance-based architectural drawing. As one in a series working with architectonic implementation in relation to body and movements, the actual project relates body-movement and dynamic drawing and presents the material as interactive ‘space-time-tables’....

19. Simultaneous projection of particle-number and angular momentum BCS wave-functions in the rare-earth nuclei

International Nuclear Information System (INIS)

Oudih, M.R.; Benhamouda, N.; Fellah, M.; Allal, N.H.

2000-01-01

A method of simultaneous particle-number and angular-momentum projection of the BCS wave-function is presented. The particle number projection method is of FBCS type. In the frame work of the adiabatic approximation, the rotational energies of the axially symmetric even-even nuclei are established and numerically calculated for the rare-earth region. (author)

20. Development of an image reconstruction algorithm for a few number of projection data

International Nuclear Information System (INIS)

Vieira, Wilson S.; Brandao, Luiz E.; Braz, Delson

2007-01-01

An image reconstruction algorithm was developed for specific cases of radiotracer applications in industry (rotating cylindrical mixers), involving a very few number of projection data. The algorithm was planned for imaging radioactive isotope distributions around the center of circular planes. The method consists of adapting the original expectation maximization algorithm (EM) to solve the ill-posed emission tomography inverse problem in order to reconstruct transversal 2D images of an object with only four projections. To achieve this aim, counts of photons emitted by selected radioactive sources in the plane, after they had been simulated using the commercial software MICROSHIELD 5.05, constitutes the projections and a computational code (SPECTEM) was developed to generate activity vectors or images related to those sources. SPECTEM is flexible to support simultaneous changes of the detectors's geometry, the medium under investigation and the properties of the gamma radiation. As a consequence of the code had been followed correctly the proposed method, good results were obtained and they encouraged us to continue the next step of the research: the validation of SPECTEM utilizing experimental data to check its real performance. We aim this code will improve considerably radiotracer methodology, making easier the diagnosis of fails in industrial processes. (author)

1. Development of an image reconstruction algorithm for a few number of projection data

Energy Technology Data Exchange (ETDEWEB)

Vieira, Wilson S.; Brandao, Luiz E. [Instituto de Engenharia Nuclear (IEN-CNEN/RJ), Rio de Janeiro , RJ (Brazil)]. E-mails: wilson@ien.gov.br; brandao@ien.gov.br; Braz, Delson [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programa de Pos-graduacao de Engenharia (COPPE). Lab. de Instrumentacao Nuclear]. E-mail: delson@mailhost.lin.ufrj.br

2007-07-01

An image reconstruction algorithm was developed for specific cases of radiotracer applications in industry (rotating cylindrical mixers), involving a very few number of projection data. The algorithm was planned for imaging radioactive isotope distributions around the center of circular planes. The method consists of adapting the original expectation maximization algorithm (EM) to solve the ill-posed emission tomography inverse problem in order to reconstruct transversal 2D images of an object with only four projections. To achieve this aim, counts of photons emitted by selected radioactive sources in the plane, after they had been simulated using the commercial software MICROSHIELD 5.05, constitutes the projections and a computational code (SPECTEM) was developed to generate activity vectors or images related to those sources. SPECTEM is flexible to support simultaneous changes of the detectors's geometry, the medium under investigation and the properties of the gamma radiation. As a consequence of the code had been followed correctly the proposed method, good results were obtained and they encouraged us to continue the next step of the research: the validation of SPECTEM utilizing experimental data to check its real performance. We aim this code will improve considerably radiotracer methodology, making easier the diagnosis of fails in industrial processes. (author)

2. Managing and sharing the escalating number of sponge "unknowns": the SpongeMaps project.

Science.gov (United States)

Hooper, J N A; Hall, K A; Ekins, M; Erpenbeck, D; Wörheide, G; Jolley-Rogers, G

2013-09-01

Contemporary collections of sponges in the Indo-west Pacific have escalated substantially due to pharmaceutical discovery, national bioregional planning, and compliance with international conventions on the seabed and its marine genetic resources beyond national jurisdictions. These partially processed operational taxonomic unit (OTU) collections now vastly outweigh the expertise available to make them better "known" via complete taxonomy, yet for many bioregions they represent the most significant body of currently available knowledge. Increasing numbers of cryptic species, previously undetected morphologically, are now being discovered by molecular and chemical analyses. The uncoordinated and fragmented nature of many previous collections, however, means that knowledge and expertise gained from a particular project are often lost to future projects without a biodiversity informatics legacy. Integrating these diverse data (GIS; OTUs; images; molecular, chemical, and other datasets) required a two-way iterative process so far unavailable for sponges with existing biodiversity informatics tools. SpongeMaps arose from the initial need for online collaboration to integrate morphometric data with molecular barcodes, including the Porifera Tree of Life (PorTol) project. It provides interrogation of existing data to better process new collections; capacity to create new OTUs; publication of online pages for individual species, so as to interpret GIS and other data for online biodiversity databases and services; and automatic links to external datasets for taxonomic hierarchy, specimen GIS and mapping, DNA sequence data, chemical structures, and images.

3. Effect of number of of projections on inverse radon transform based image reconstruction by using filtered back-projection for parallel beam transmission tomography

International Nuclear Information System (INIS)

Qureshi, S.A.; Mirza, S.M.; Arif, M.

2007-01-01

This paper present the effect of number of projections on inverse Radon transform (IRT) estimation using filtered back-projection (FBP) technique for parallel beam transmission tomography. The head phantom and the lung phantom have been used in this work. Various filters used in this study include Ram-Lak, Shepp-Logan, Cosin, Hamming and Hanning filters. The slices have been reconstructed by increasing the number of projections through parallel beam transmission tomography keeping the projections uniformly distributed. The Euclidean and Mean Squared errors and peak signal-to-noise ratio (PSNR) have been analyzed for their sensitiveness as functions of number of projections. It has found that image quality improves with the number of projections but at the cost of the computer time. The error has been minimized to get the best approximation of inverse Radon transform (IRT) as the number of projections is enhanced. The value of PSNR has been found to increase from 8.20 to 24.53 dB as the number of projections is raised from 5 to 180 for head phantom. (author)

4. Analysing Children's Drawings: Applied Imagination

Science.gov (United States)

Bland, Derek

2012-01-01

This article centres on a research project in which freehand drawings provided a richly creative and colourful data source of children's imagined, ideal learning environments. Issues concerning the analysis of the visual data are discussed, in particular, how imaginative content was analysed and how the analytical process was dependent on an…

5. 77 FR 24197 - Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-04-23

... Drawing Mississippi 8 Hydro, LLC Project No. 13010-002. FFP Project 98, LLC Project No. 14272-000. The..., or her designee, will conduct a random drawing to determine the filing priority of the applicants... section 4.37 of its regulations.\\2\\ The priority established by this drawing will be used to determine...

6. 77 FR 9915 - Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-21

... Drawing Lock+ Hydro Friends Fund XLI Project No. 14182-000 FFP Project 54, LLC Project No. 14192-000 The... her designee, will conduct a random drawing to determine the filing priority of the applicants... section 4.37 of its regulations.\\2\\ The priority established by this drawing will be used to determine...

7. Isovector pairing effect on the particle-number projection two-proton separation energy

Energy Technology Data Exchange (ETDEWEB)

Mokhtari, Djamila; Kerrouchi, Slimane [Laboratoire de Physique Theorique, Faculte de Physique, Algiers (Algeria); Fellah, Mohamed; Allal, Nassima-Hosni [Laboratoire de Physique Theorique, Faculte de Physique, Algiers (Algeria); Centre de Recherche Nucleaire d' Alger, Comena, Algiers (Algeria)

2009-07-01

The two-proton separation energy is studied by performing a particle-number projection with and without inclusion of the isovector neutron-proton (np) pairing correlations. It is numerically evaluated for even-even rare-earth nuclei such that the np pairing parameter is non-zero. It is shown that the two-proton separation energy values calculated using the two approaches join, for almost all the considered elements, for the highest values of (N-Z). However, the results including the np pairing correlations are closest to the experimental data when available. Moreover, the two methods lead to the same prediction of the two-proton drip-line position, except for the Dysprosium and the Tungsten.

8. Geometric and engineering drawing

CERN Document Server

Morling, K

2010-01-01

The new edition of this successful text describes all the geometric instructions and engineering drawing information that are likely to be needed by anyone preparing or interpreting drawings or designs with plenty of exercises to practice these principles.

9. Mixed Movements/performance-based drawing

DEFF Research Database (Denmark)

Brabrand, Helle

2010-01-01

Mixed Movements is a research project engaged in performance-based architectural drawing. The project experiments with drawing-series as montages of materials and forces, making the drawing appear in its changing character. The moving components are conditioned by different circumstances...... that question each other, working as well with space-time motives as with expressions and techniques. A series poses questions both to the kind of forces it raises as well as to the kind of sensual affects it produces – to how the body resonates with the rhythms and tensions that appear in the drawing....... A drawing-series is then both a machine, a diagram, and an appearance, what we call a resonance-model, creating links between tectonic and drawing constructions, kinaesthetic competences and actual body-movements....

10. Engineering drawing field verification program. Revision 3

International Nuclear Information System (INIS)

Ulk, P.F.

1994-01-01

Safe, efficient operation of waste tank farm facilities is dependent in part upon the availability of accurate, up-to-date plant drawings. Accurate plant drawings are also required in support of facility upgrades and future engineering remediation projects. This supporting document establishes the procedure for performing a visual field verification of engineering drawings, the degree of visual observation being performed and documenting the results. A copy of the drawing attesting to the degree of visual observation will be paginated into the released Engineering Change Notice (ECN) documenting the field verification for future retrieval and reference. All waste tank farm essential and support drawings within the scope of this program will be converted from manual to computer aided drafting (CAD) drawings. A permanent reference to the field verification status will be placed along the right border of the CAD-converted drawing, referencing the revision level, at which the visual verification was performed and documented

11. HippoDraw

International Nuclear Information System (INIS)

Gravina, M.F.; Kunz, P.F.; Rensing, P.E.

1992-09-01

HippoDraw is a NeXTSTEP application for viewing statistical data. It has several unique features which make viewing data distributions highly interactive. It also incorporates a set of simple drawing tools. HippoDraw is written in Objective-C and uses the Hippoplotamus library package to handle the n-tuples and displays

12. Generative Processes: Thick Drawing

Science.gov (United States)

Wallick, Karl

2012-01-01

This article presents techniques and theories of generative drawing as a means for developing complex content in architecture design studios. Appending the word "generative" to drawing adds specificity to the most common representation tool and clarifies that such drawings are not singularly about communication or documentation but are…

13. Contracts for field projects and supporting research on enhanced oil recovery. Progress review number 83, quarter ending June 30, 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-08-01

Summaries of 41 research projects on enhanced recovery are presented under the following sections: (1) chemical flooding; (2) gas displacement; (3) thermal recovery; (4) geoscience technology; (5) resource assessment technology; and (6) reservoir classes. Each presentation gives the title of the project, contract number, research facility, contract date, expected completion data, amount of the award, principal investigator, and DOE program manager, and describes the objectives of the project and a summary of the technical progress.

14. TWRS system drawings and field verification

International Nuclear Information System (INIS)

Shepard, D.G.

1995-01-01

The Configuration Management Program combines the TWRS Labeling and O and M drawing and drawing verification programs. The combined program will produce system drawings for systems that are normally operated or have maintenance performed on the system, label individual pieces of equipment for proper identification, even if system drawings are not warranted, and perform verification of drawings that are identified as essential in Tank Farm Essential Drawing Plans. During fiscal year 1994, work was begun to label Tank Farm components and provide user friendly system based drawings for Tank Waste Remediation System (TWRS) operations and maintenance. During the first half of fiscal 1995, the field verification program continued to convert TWRS drawings into CAD format and verify the accuracy based on visual inspections. During the remainder of fiscal year 1995 these efforts will be combined into a single program providing system based drawings and field verification of TWRS equipment and facilities. This combined program for TWRS will include all active systems for tank farms. Operations will determine the extent of drawing and labeling requirements for single shell tanks, i.e. the electrical distribution, HVAC, leak detection, and the radiation monitoring system. The tasks required to meet these objectives, include the following: identify system boundaries or scope for drawing being verified; label equipment/components in the process systems with a unique Equipment Identification Number (EIN) per the TWRS Data Standard; develop system drawings that are coordinated by ''smart'' drawing numbers and/or drawing references as identified on H-14-020000; develop a Master Equipment List (MEL) multi-user data base application which will contain key information about equipment identified in the field; and field verify and release TWRS Operation and Maintenance (O and M) drawings

15. Physics momentum 'stars' draw majors

CERN Multimedia

Lindström, I

2003-01-01

Over the past decade, the number of University of Arizona students declaring physics as their major has doubled, amid a national decline. According to a recent report by the National Task Force on Undergraduate Physics, it is the university's dedication to its undergraduate physics program which draws students in (1 page).

16. COMPARISON OF TREND PROJECTION METHODS AND BACKPROPAGATION PROJECTIONS METHODS TREND IN PREDICTING THE NUMBER OF VICTIMS DIED IN TRAFFIC ACCIDENT IN TIMOR TENGAH REGENCY, NUSA TENGGARA

Directory of Open Access Journals (Sweden)

2016-10-01

Full Text Available The purpose of this study is to predict the number of traffic accident victims who died in Timor Tengah Regency with Trend Projection method and Backpropagation method, and compare the two methods based on the degree of guilt and predict the number traffic accident victims in the Timor Tengah Regency for the coming year. This research was conducted in Timor Tengah Regency where data used in this study was obtained from Police Unit in Timor Tengah Regency. The data is on the number of traffic accidents in Timor Tengah Regency from 2000 – 2013, which is obtained by a quantitative analysis with Trend Projection and Backpropagation method. The results of the data analysis predicting the number of traffic accidents victims using Trend Projection method obtained the best model which is the quadratic trend model with equation Yk = 39.786 + (3.297 X + (0.13 X2. Whereas by using back propagation method, it is obtained the optimum network that consists of 2 inputs, 3 hidden screens, and 1 output. Based on the error rates obtained, Back propagation method is better than the Trend Projection method which means that the predicting accuracy with Back propagation method is the best method to predict the number of traffic accidents victims in Timor Tengah Regency. Thus obtained predicting the numbers of traffic accident victims for the next 5 years (Years 2014-2018 respectively - are 106 person, 115 person, 115 person, 119 person and 120 person.   Keywords: Trend Projection, Back propagation, Predicting.

17. Online Working Drawing Review and Assessment

Science.gov (United States)

McInnis, Jennifer; Sobin, Alexandra; Bertozzi, Nicholas; Planchard, Marie

2010-01-01

This paper describes the development and implementation of an online working drawing review video and online assessment tool. Particular attention was paid to dimensioning and ASME ANSI Y14 standards with the goal of improving the quality of the working drawings required in final design project reports. All members of freshmen design teams in the…

18. A comprehensive study on decreasing the kilovoltage cone-beam CT dose by reducing the projection number.

Science.gov (United States)

Lu, Bo; Lu, Haibin; Palta, Jatinder

2010-05-12

The objective of this study was to evaluate the effect of kilovoltage cone-beam computed tomography (CBCT) on registration accuracy and image qualities with a reduced number of planar projections used in volumetric imaging reconstruction. The ultimate goal is to evaluate the possibility of reducing the patient dose while maintaining registration accuracy under different projection-number schemes for various clinical sites. An Elekta Synergy Linear accelerator with an onboard CBCT system was used in this study. The quality of the Elekta XVI cone-beam three-dimensional volumetric images reconstructed with a decreasing number of projections was quantitatively evaluated by a Catphan phantom. Subsequently, we tested the registration accuracy of imaging data sets on three rigid anthropomorphic phantoms and three real patient sites under the reduced projection-number (as low as 1/6th) reconstruction of CBCT data with different rectilinear shifts and rota-tions. CBCT scan results of the Catphan phantom indicated the CBCT images got noisier when the number of projections was reduced, but their spatial resolution and uniformity were hardly affected. The maximum registration errors under the small amount transformation of the reference CT images were found to be within 0.7 mm translation and 0.3 masculine rotation. However, when the projection number was lower than one-fourth of the full set with a large amount of transformation of reference CT images, the registration could easily be trapped into local minima solutions for a nonrigid anatomy. We concluded, by using projection-number reduction strategy under conscientious care, imaging-guided localization procedure could achieve a lower patient dose without losing the registration accuracy for various clinical sites and situations. A faster scanning time is the main advantage compared to the mA decrease-based, dose-reduction method.

19. 76 FR 16408 - Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2011-03-23

... Drawing Lock+ Hydro Friends Fund XXXVII.. Project No. 13738-000. FFP Missouri 6, LLC Project No. 13761-000... random drawing to determine the filing priority of the applicants identified in this notice. The...\\ The priority established by this drawing will be used to determine which applicant, among those with...

20. 77 FR 10739 - Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2012-02-23

... Drawing Project No. FFP Project 91, LLC 14275-000 Riverbank Hydro No. 23, LLC 14279-000 Lock+ Hydro... conduct a random drawing to determine the filing priority of the applicants identified in this notice. The...\\ The priority established by this drawing will be used to determine which applicant, among those with...

1. 76 FR 4894 - Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2011-01-27

... Drawing January 20, 2011. Lock Hydro Friends Fund XLI Project No. 13736-000 Allegheny 7 Hydro, LLC Project... Secretary of the Commission, or her designee, will, by random drawing, determine the filing priority for the two applicants identified in this notice. The drawing is open to the public and will be held in room...

2. 76 FR 4893 - Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2011-01-27

... Drawing January 20, 2011. Lock Hydro Friends Fund XXXV Project No. 13735-000 FFP Missouri 7, LLC Project... Commission, or her designee, will, by random drawing, determine the filing priority for the three applicants identified in this notice. The drawing is open to the public and will be held in room 2C, the Commission...

3. 76 FR 16409 - Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2011-03-23

... Drawing Lock+ Hydro Friends Fund XXXIV... Project No. 13742-000. FFP Missouri 5, LLC Project No. 13757-000... Commission, or her designee, will conduct a random drawing to determine the filing priority of the applicants... section 4.37 of its regulations.\\3\\ The priority established by this drawing will be used to determine...

4. 76 FR 16407 - Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2011-03-23

... Drawing Lock+ Hydro Friends Fund XLVI.... Project No. 13734-000. FFP Missouri 17, LLC Project No. 13754... Secretary of the Commission, or her designee, will conduct a random drawing to determine the filing priority... applications as provided in section 4.37 of its regulations.\\3\\ The priority established by this drawing will...

5. Drawing in nursing PBL.

Science.gov (United States)

Chan, Zenobia C Y

2013-08-01

The implementation of art education in nursing is said to have positive effects on nursing students. Most studies applied visual art dialogues or object design, whereas the effectiveness of drawing as a teaching and learning method is rarely examined and discussed. This paper aimed to discuss the potential and effectiveness of drawing as a learning and teaching method. Four drawings which were created by Hong Kong nursing students are demonstrated and the students' perspectives of how drawing enhanced learning are shown in this paper. Topics on drawing as a fun teaching and learning method and the way it can enhance critical thinking and creativity are also discussed. In conclusion, the activity was a great success, and students enjoyed the learning process and reflected positive comments. However, we cannot conclude that drawing is an effective teaching and learning method based on a single paper, therefore more similar studies should be conducted to investigate this method. Copyright © 2012 Elsevier Ltd. All rights reserved.

6. MiniDraw

DEFF Research Database (Denmark)

2018-01-01

MiniDraw is a teaching-oriented 2D graphics direct manipulation framework in Java, inspired by JHotDraw. It is used in the book "Flexible, Reliable Software - using Patterns and Agile Development", by Henrik Bærbak Christensen, published by CRC Press 2010.......MiniDraw is a teaching-oriented 2D graphics direct manipulation framework in Java, inspired by JHotDraw. It is used in the book "Flexible, Reliable Software - using Patterns and Agile Development", by Henrik Bærbak Christensen, published by CRC Press 2010....

7. Spent nuclear fuel project multi-year work plan WBS number 1.4.1

International Nuclear Information System (INIS)

Wells, J.L.

1997-01-01

The Spent Nuclear Fuel (SNF) Project Multi-Year Work Plan (MYWP) is a controlled living document that contains the current SNF Project Technical, Schedule and Cost Baselines. These baselines reflect the current Project execution strategies and are controlled via the change control process. Other changes to the MYWP document will be controlled using the document control process. These changes will be processed as they are approved to keep the MYWP a living document. The MYWP will be maintained continuously as the project baseline through the life of the project and not revised annually. The MYWP is the one document which summarizes and links these three baselines in one place. Supporting documentation for each baseline referred to herein may be impacted by changes to the MYWP, and must also be revised through change control to maintain consistency

8. Survey and analysis of satellite-based telemedicine projects involving Japan and developing nations: investigation of transmission rates, channel numbers, and node numbers.

Science.gov (United States)

Nakajima, I; Natori, M; Takizawa, M; Kaihara, S

2001-01-01

We surveyed interactive telemedicine projects via telecommunications satellite (AMINE-PARTNERS, Post-PARTNERS, and Shinshu University Project using Inmarsat satellites) offered by Japan as assistance to developing countries. The survey helped clarify channel occupation time and data transfer rates. Using our survey results, we proposed an optimized satellite model with VSATs simulating the number of required channels and bandwidth magnitude. For future implementation of VSATs for medical use in developing nations, design of telecommunication channels should take into consideration TCP/IP-based operations. We calculated that one hub station with 30-76 VSATs in developing nation can be operated on bandwidth 6 Mbps using with 128 Kbps videoconferencing system for teleconsultation and teleconference, and linking with Internet.

9. Responding to Children's Drawings

Science.gov (United States)

Watts, Robert

2010-01-01

This article aims to explore the issues that face primary school teachers when responding to children's drawings. Assessment in art and design is an ongoing concern for teachers with limited experience and confidence in the area and, although children's drawings continue to be a focus of much research, the question of what it is that teachers say…

10. Architecture, Drawing, Topology

DEFF Research Database (Denmark)

Meldgaard, Morten

This book presents contributions of drawing and text along with their many relationalities from ontology to history and vice versa in a range of reflections on architecture, drawing and topology. We hope to thereby indicate the potential of the theme in understanding not only the architecture of ...

11. Strict confluent drawing

NARCIS (Netherlands)

Eppstein, D.; Holten, D.H.R.; Löffler, M.; Nöllenburg, M.; Speckmann, B.; Verbeek, K.A.B.

2013-01-01

We define strict confluent drawing, a form of confluent drawing in which the existence of an edge is indicated by the presence of a smooth path through a system of arcs and junctions (without crossings), and in which such a path, if it exists, must be unique. We prove that it is NP-complete to

12. Strict confluent drawing

NARCIS (Netherlands)

Eppstein, D.; Holten, D.; Löffler, M.; Nöllenburg, M.; Speckmann, B.; Verbeek, K.A.B.

2016-01-01

We define strict confluent drawing, a form of confluent drawing in which the existence of an edge is indicated by the presence of a smooth path through a system of arcs and junctions (without crossings), and in which such a path, if it exists, must be unique. We prove that it is NP-complete to

13. Characterization equipment essential drawing plan

International Nuclear Information System (INIS)

WILSON, G.W.

1999-01-01

The purpose of this document is to list the Characterization equipment drawings that are classified as Essential Drawings. Essential Drawings: Are those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment (HNF 1997a). The Characterization equipment drawings identified in this report are deemed essential drawings as defined in HNF-PRO-242, Engineering Drawing Requirements (HNF 1997a). These drawings will be prepared, revised, and maintained per HNF-PRO-440, Engineering Document Change Control (HNF 1997b). All other Characterization equipment drawings not identified in this document will be considered Support drawings until the Characterization Equipment Drawing Evaluation Report is completed

14. Automated drawing generation system

International Nuclear Information System (INIS)

Yoshinaga, Toshiaki; Kawahata, Junichi; Yoshida, Naoto; Ono, Satoru

1991-01-01

Since automated CAD drawing generation systems still require human intervention, improvements were focussed on an interactive processing section (data input and correcting operation) which necessitates a vast amount of work. As a result, human intervention was eliminated, the original objective of a computerized system. This is the first step taken towards complete automation. The effects of development and commercialization of the system are as described below. (1) The interactive processing time required for generating drawings was improved. It was determined that introduction of the CAD system has reduced the time required for generating drawings. (2) The difference in skills between workers preparing drawings has been eliminated and the quality of drawings has been made uniform. (3) The extent of knowledge and experience demanded of workers has been reduced. (author)

15. Moving vertices to make drawings plane

NARCIS (Netherlands)

Goaoc, X.; Kratochvil, J.; Okamoto, Y.; Shin, C.S.; Wolff, A.; Hong, S.K.; Nishizeki, T.; Quan, W.

2008-01-01

In John Tantalo’s on-line game Planarity the player is given a non-plane straight-line drawing of a planar graph. The aim is to make the drawing plane as quickly as possible by moving vertices. In this paper we investigate the related problem MinMovedVertices which asks for the minimum number of

16. Creativity in Numbers and Words:The Analysis of Divergence in Creative Project Perception

Directory of Open Access Journals (Sweden)

Alina Kozarkiewicz

2018-05-01

Full Text Available Aim/purpose - The main purpose of this paper is to identify the necessity of distinguishing a particular taxonomic group termed creative projects. Is it a peculiar, distinctive type of projects, or nowadays every project can be denominated 'creative'? The research aims at comparing the ways of understanding and defining this term in prior literature and in the opinions of practitioners involved in everyday project management and realization. Design/methodology/approach - The paper is divided into main parts corresponding to research objectives: first, the results of literature research is demonstrated briefly, and next the results of empirical research are delineated. The empirical research was conducted with mixed methods. The quantitative part conducted as CAWI was supported by Poll Everywhere platform, the qualitative investigations were supported by MAXQDA software. Findings - According to research results, there exists the inconsistency among the views of researchers, as well as practitioners. As the literature review reveals, there are various stances towards this issue: from silent assumption that the concept does not require to be defined till some analyses of the relations between routine and creative actions. Similar variety was disclosed when analyzing practitioners' judgments. Research implications/limitations - The divergence in opinions as to the necessity of distinguishing a particular taxon of creative projects as well as the broad variety of opinions as to their specific characteristics have given rise to the call for more precise framing scientific research on creative projects. The research has numerous limitations result-ing from its scope, sampling method or sample size, however, it demonstrates the absence of coherent views and variety of arguments used.Originality/value/contribution - Apart from urging the more rigorous frames of research on creative projects, the paper indicates new avenues of investigations oriented

17. Simultaneous projection of particle-number and angular momentum BCS wave-functions in the rare-earth nuclei

International Nuclear Information System (INIS)

Oudih, M.R.; Fellah, M.; Allal, N.H.; Benhamouda, N.

1999-01-01

It is well established that the BCS wave-functions are neither eigen-functions of the particle-number operator nor of the angular momentum operator. In a previous paper, we have developed a particle-number projection before variation method (of FBCS type). This discrete projection method is based on the SBCS wave-function. The aim of the present contribution is to perform a subsequent angular momentum projection by means of the Peierls-Yoccoz method. The general expression of the system energy, after the double projection, is established in the case of axial symmetry. For practical calculations, an approximation method is introduced. It leads to a semi-classical form of the rotational energy. The rotational spectra have been evaluated numerically for some even-even rare-earth nuclei. The single-particle energies and eigen-states are those of a deformed Woods-Saxon mean field. The obtained results are compared on one hand, to the experimental data, and on the other hand, to the theoretical spectra evaluated by a particle-number projection after variation method (of PBCS type). For all studied nuclei, the spectra determined by the FBCS method reproduce the experimental data better than those of the PBCS method. However, even if the present method is satisfying for low angular momenta, the agreement with the experimental data is lesser for I ≥ 8, particularly for the lighter studied nuclei. (authors)

18. Report on the project of drawing energy-saving visions for the Town of Sayo district; Sayomachi chiiki sho energy vision sakutei jigyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The survey/study is conducted to draw the district energy visions for Town of Sayo, Hyogo Pref. The town as a whole consumes energy at 1,269,040GJ/y, or 140,817MJ/y per capita, which is about 1.2 times larger than the nationwide average. By energy source, electric power accounts for 43%, and oil products 53%. The town as a whole emits carbon dioxide at 18,900,403kg-C/y, or 2,097kg-C/y per capita, which is lower than the nationwide average. The short-term (1 year or less), medium-term (3 year or less) and long-term (5 years or less) targets are drawn by employees of the town offices, citizens and entrepreneurs for energy-saving directions (saving of power for air conditioning by adjusting clothes, wider use of bicycles and public trains). Those facilities investigated for promoting energy saving include those for the town office buildings, solar energy system for producing hot water for town-operated swimming pool, and solar energy system and photovoltaic system for Harima Observatory Park. (NEDO)

19. Order of blood draw

DEFF Research Database (Denmark)

Cornes, Michael; van Dongen-Lases, Edmée; Grankvist, Kjell

2017-01-01

does occur if order of draw is not followed during blood collection and when performing venipuncture under less than ideal circumstances, thus putting patient safety at risk. Moreover, given that order of draw is not difficult to follow and knowing that ideal phlebotomy conditions and protocols...... Medicine Working Group for the Preanalytical Phase (EFLM WG-PRE) provides an overview and summary of the literature with regards to order of draw in venous blood collection. Given the evidence presented in this article, the EFLM WG-PRE herein concludes that a significant frequency of sample contamination...

20. Controlling the Instructional Development Process. Training Development and Research Center Project Number Fifteen.

Science.gov (United States)

Sleezer, Catherine M.; Swanson, Richard A.

Process control is a way of training managers in business and industry to plan, monitor, and communicate the instructional development process of training projects. Two simple and useful tools that managers use in controlling the process of instructional development are the Process Control Planning Sheet and the Process Control Record. The Process…

1. Drawings: Kozloduy NPP

International Nuclear Information System (INIS)

1995-01-01

This paper includes drawings of Kozloduy nuclear power plant needed for study for the seismic analysis and testing. It covers the list and schemes of safety and safety related systems for normal operation as well as protection and control systems

2. Right Brain Drawing.

Science.gov (United States)

1985-01-01

The author describes activities of a weekly enrichment class providing right-brain tasks to gifted elementary students. Activities, which centered on artistic creativity, were taken from "Drawing On the Right Side of the Brain" by B. Edwards. (CL)

3. Configuration mixing of mean-field wave functions projected on angular momentum and particle number: Application to 24Mg

International Nuclear Information System (INIS)

Valor, A.; Heenen, P.-H.; Bonche, P.

2000-01-01

We present in this paper the general framework of a method which permits to restore the rotational and particle number symmetries of wave functions obtained in Skyrme HF + BCS calculations. This restoration is nothing but a projection of mean-field intrinsic wave functions onto good particle number and good angular momentum. The method allows us also to mix projected wave functions. Such a configuration mixing is discussed for sets of HF + BCS intrinsic states generated in constrained calculations with suitable collective variables. This procedure gives collective states which are eigenstates of the particle number and the angular momentum operators and between which transition probabilities are calculated. An application to 24 Mg is presented, with mean-field wave functions generated by axial quadrupole constraints. Theoretical spectra and transition probabilities are compared to the experiment

4. Drawing Children into Reading: A Qualitative Case Study of a Preschool Drawing Curriculum

Science.gov (United States)

DeFauw, Danielle L.

2016-01-01

This article details a qualitative case study of 24 preschool children engaged with step-by-step drawing instruction provided by five educators as they developed their fine motor skills and drew detailed objects using the Drawing Children Into Reading curriculum (Halperin, W. A. (2011a). "Project 50 preschool manual." South Haven, MI:…

5. SURF: a subroutine code to draw the axonometric projection of a surface generated by a scalar function over a discretized plane domain using finite element computations

International Nuclear Information System (INIS)

Giuliani, Giovanni; Giuliani, Silvano.

1980-01-01

The FORTRAN IV subroutine SURF has been designed to help visualising the results of Finite Element computations. It drawns the axonometric projection of a surface generated in 3-dimensional space by a scalar function over a discretized plane domain. The most important characteristic of the routine is to remove the hidden lines and in this way it enables a clear vision of the details of the generated surface

Science.gov (United States)

Wojaczyńska-Stanek, Katarzyna; Koprowski, Robert; Wróbel, Zygmunt; Gola, Małgorzata

2008-02-01

7. 75 FR 32459 - Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2010-06-08

... Drawing May 28, 2010. In the matter of: Three Rivers Park District, Project No. 13457- 000, BOST1... Secretary of the Commission, or her designee, will, by random drawing, determine the filing priority for the two applicants identified in this notice. The drawing is open to the public and will be held in room...

8. 76 FR 15972 - Notice Announcing Preliminary Permit Drawing

Science.gov (United States)

2011-03-22

... Drawing Project No. Lock+ Hydro Friends Fund XXXVIII 13744-000 FFP Missouri 12, LLC 13755-000 Allegheny 2... Secretary of the Commission, or her designee, will conduct a random drawing to determine the filing priority... applications as provided in section 4.37 of its regulations.\\2\\ The priority established by this drawing will...

9. Tank farms essential drawing plan

International Nuclear Information System (INIS)

Domnoske-Rauch, L.A.

1998-01-01

The purpose of this document is to define criteria for selecting Essential Drawings, Support Drawings, and Controlled Print File (CPF) drawings and documents for facilities that are part of East and West Tank Farms. Also, the drawings and documents that meet the criteria are compiled separate listings. The Essential Drawing list and the Support Drawing list establish a priority for updating technical baseline drawings. The CPF drawings, denoted by an asterisk (*), defined the drawings and documents that Operations is required to maintain per the TWRS Administration Manual. The Routing Boards in Buildings 272-WA and 272-AW are not part of the CPF

10. Project report on drawing district energy-saving visions for Town of Nishi Senboku; Nishi Senboku machi sho energy vision sakutei nado jigyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Studied in this project are concrete energy-saving procedures, and potentially saved energy and abated CO2 emissions in Town of Nishi Senboku, to promote energy saving and abatement of gas emissions which cause global warming. The energy-saving procedures studied include co-generation, utilization of waste heat, wind power generation, utilization of low-temperature heat by snow, fuel-efficient vehicles, use of insulators for houses, energy-saving type electric appliances, energy-saving activities, and eco-driving. The results indicate that the energy-saving activities and eco-driving can potentially more contribute to energy saving than the others. The study on introduction of energy-saving facilities in the 'Nukumori Hot Spring/Umeria' project indicates that the heat pump plus co-generation case is the most advantageous, because it can potentially reduce primary energy by 2,845,215MJ/y and CO2 emissions by 22,688kg-C/y. Introduction of energy-saving facilities is also studied for an information center in the Nishi-Senboku service area for the Akita Highway. The results indicate that the introduction can potentially reduce primary energy and CO2 emissions by 25 and 13%, respectively. (NEDO)

11. Linear stories in Carlo Scarpa's architectural drawings

DEFF Research Database (Denmark)

Dayer, Carolina

2017-01-01

, an architect guides the viewer’s imagination into another not-yet-real world that is projected much like divinatory practices of reading palms or tarot cards. The magic-real field of facts and fictions coexisting in one realm can be understood as a confabulation. A confabulation brings together both fact...... close reading of the drawings has been made despite the thousands of drawings the architect constructed. Scarpa’s drawings, like confabulations, are places where many realities simultaneously coexist but all constitute one reality in a linear process, linear understood not as a straight, nor predictable...

12. Poster — Thur Eve — 01: The effect of the number of projections on MTF and CNR in Compton scatter tomography

International Nuclear Information System (INIS)

2014-01-01

Purpose: To investigate the dependence of the reconstructed image quality on the number of projections in multi-projection Compton scatter tomography (MPCST). The conventional relationship between the projection number used for reconstruction and reconstructed image quality pertained to CT does not necessarily apply to MPCST, which can produce images from a single projection if the detectors have sufficiently high energy and spatial resolution. Methods: The electron density image was obtained using filtered-backprojection of the scatter signal over circular arcs formed using Compton equation. The behavior of the reconstructed image quality as a function of the projection number was evaluated through analytical simulations and characterized by CNR and MTF. Results: The increase of the projection number improves the contrast with this dependence being a function of fluence. The number of projections required to approach the asymptotic maximum contrast decreases as the fluence increases. Increasing projection number increases the CNR but not spatial resolution. Conclusions: For MPCST using a 500eV energy resolution and a 2×2mm 2 size detector, an adequate image quality can be obtained with a small number of projections provided the incident fluence is high enough. This is conceptually different from conventional CT where a minimum number of projections is required to obtain an adequate image quality. While increasing projection number, even for the lowest dose value, the CNR increases even though the number of photons per projection decreases. The spatial resolution of the image is improved by increasing the sampling within a projection rather than by increasing the number of projections

13. Projections on the number of individuals with atrial fibrillation in the European Union, from 2000 to 2060.

Science.gov (United States)

Krijthe, Bouwe P; Kunst, Anton; Benjamin, Emelia J; Lip, Gregory Y H; Franco, Oscar H; Hofman, Albert; Witteman, Jacqueline C M; Stricker, Bruno H; Heeringa, Jan

2013-09-01

Since atrial fibrillation (AF) is associated with increased risks of cardiovascular and cerebrovascular complications, estimations on the number of individuals with AF are relevant to healthcare planning. We aimed to project the number of individuals with AF in the Netherlands and in the European Union from 2000 to 2060. Age- and sex-specific AF prevalence estimates were obtained from the prospective community-based Rotterdam Study. Population projections for the Netherlands and the European Union were obtained from the European Union's statistics office. In the age stratum of 55-59 years, the prevalence of AF was 1.3% in men (95% CI: 0.4-3.6%) and 1.7% in women (95% CI: 0.7-4.0%). The prevalence of AF increased to 24.2% in men (95% CI: 18.5-30.7%), and 16.1% in women (95% CI: 13.1-19.4%), for those >85 years of age. This age- and sex-specific prevalence remained stable during the years of follow-up. Furthermore, we estimate that in the European Union, 8.8 million adults over 55 years had AF in 2010 (95% CI: 6.5-12.3 million). We project that this number will double by 2060 to 17.9 million (95% CI: 13.6-23.7 million) if the age- and sex-specific prevalence remains stable. We estimate that from 2010 to 2060, the number of adults 55 years and over with AF in the European Union will more than double. As AF is associated with significant morbidities and mortality, this increasing number of individuals with AF may have major public health implications.

14. Deterritorializing Drawing - transformation/deformation

DEFF Research Database (Denmark)

Brabrand, Helle

2012-01-01

the capacity of the body to be affected by change. The everyday and the ceremonial body, the ordinary and the aberrant movement – these poles generate a passage rather than a difference from the one to the other: from attitude or position to gesture or kinaesthetic twist. Known from without through perception...... but also from within by sensations, body ‘images’ are different to all other images. Twisting these body images make a mode of operation of art. The paper will address the above issues discussing modes of operation and appearance of my actual project. Acting in the reality of drawing, the project confront...... criticises figurative as well as abstract painting as passing through the brain and not acting directly upon the senses. Figurative and abstract painting both fail to liberate the Figure, implementing transformation of form, but not attaining deformations of bodies. Bacon, then, is concerned about...

15. Deterritorializing Drawing - transformation/deformation

DEFF Research Database (Denmark)

Brabrand, Helle

2012-01-01

but also from within by sensations, body ‘images’ are different to all other images. Twisting these body images make a mode of operation of art. The paper will address the above issues discussing modes of operation and appearance of my actual project. Acting in the reality of drawing, the project confront...... criticises figurative as well as abstract painting as passing through the brain and not acting directly upon the senses. Figurative and abstract painting both fail to liberate the Figure, implementing transformation of form, but not attaining deformations of bodies. Bacon, then, is concerned about...... deformation, about painting the sensation, which is essentially rhythm, making Figure-rhythm relations appear as vibrations that flow through the body - making resonance. Deleuze, with Bergson, argues that art extracts ’a little time in a pure state’ from the everyday repetitions, and thereby opens...

16. RODOS User's Group: Final project report. Contract number: F14P- CT98-0075

International Nuclear Information System (INIS)

Sinkko, K.; Ammann, M.

2001-03-01

Prior to 1998, the development of RODOS, a decision support system designed for the management of nuclear emergencies, had been carried out almost entirely by research scientists and engineers. The end-users/operators had little or no input into this development. To redress this situation, the RODOS Users Group (RUG) was established in 1998 under a Concerted Action Contract between the European Commission and STUK. The main objectives of this group were to encourage the emergency management community to use such a system, to provide a forum for end-users to share their experience in the use of such systems and to provide feedback from the end-users to the model and system developers in regard to operational problems and required improvements. The contract, which commenced on 1st September 1998, was for a period of two years. During this period, RUG established a www homepage, planned and performed two nuclear accident exercises and held four meetings. Technically the Web page operated very well. State-of-the-art Internet technology provided an efficient communication channel at low cost. The membership of the RUG was, however, too low to maintain a lively and ongoing discussion in parallel with the RODOS project Web page. This experience would suggest that it might have been better to have operated a Web page for RUG on the RODOS project Web-site rather than an independent RUG Web-site. Exercises based on fixed accident scenarios proved to be an appropriate means of highlighting issues that needed to be discussed between users and developers and to stimulate and motivate the end-users to maintain and further develop the system. Such exercises also promoted further activity in the field of emergency management. The organisation and administration of realistic exercises are time consuming, laborious and expensive. It is therefore very important that the maximum benefit is achieved from such exercises. The use of analytical evaluation methods could be better employed

17. 40 CFR 35.3560 - General payment and cash draw rules.

Science.gov (United States)

2010-07-01

... for set-asides. A State may draw cash through the ACH for the full amount of costs incurred for set... incurred project costs prior to drawing cash. A State may not draw cash for a particular project until the... 40 Protection of Environment 1 2010-07-01 2010-07-01 false General payment and cash draw rules. 35...

18. Mechanical Drawing and Design.

Science.gov (United States)

Mikulsky, Marilyn; McEnaney, Walter K.

A syllabus is provided for a comprehensive foundation course in mechanical drawing and design for grades 9, 10, 11, or 12 that is prerequisite to advanced elective courses. Introductory materials include course objectives, an overview of basic concepts, and guidelines for implementation. Brief discussions of and suggestions for the areas of design…

19. Drawing the Line

DEFF Research Database (Denmark)

Holm, Isak Winkel

2016-01-01

of judgement that distinguishes between the inside and outside of a political community, between citizens and zombies. Second, the chapter focuses on the rhetorics applied to draw the line between rights-bearers and the rightless. ‘Prophetic’ speech, echoing the language of the Old Testament prophets, is vital...

20. Drawing experts have better visual memory while drawing

NARCIS (Netherlands)

Perdreau, F.A.G.; Cavanagh, P.

2015-01-01

Drawing involves frequent shifts of gaze between the original and the drawing and visual memory helps compare the original object and the drawing across these gaze shifts while creating and correcting the drawing. It remains unclear whether this memory encodes all of the object or only the features

1. Defense Horizons. Number 78, March 2015

Science.gov (United States)

2015-03-01

and antelope Valley College (aVC) results in increases in number of scientists, engi- neers, and technicians from which to draw employees for the...should address best prac- tices for project valuation , what types of formalized arrangements are acceptable, and legal precedents that allow such

2. Endometrial Cancer Trends by Race and Histology in the USA: Projecting the Number of New Cases from 2015 to 2040.

Science.gov (United States)

Gaber, Charles; Meza, Rafael; Ruterbusch, Julie J; Cote, Michele L

2016-10-17

The aim of this study is to explore incidence and incidence-based mortality trends for endometrial cancer in the USA and project future incident cases, accounting for differences by race and histological subtype. Data on age-adjusted and age-specific incidence and mortality rates of endometrial cancer were obtained from the Surveillance, Epidemiology, and End Results 18 registries. Trends in rates were analyzed using Joinpoint regression, and average annual percent change (AAPC) in recent years (2006-2011) was computed for histological subtypes by race. Age, histological, and race-specific rates were applied to US Census Bureau population census estimates to project new cases from 2015 to 2040, accounting for observed AAPC trends, which were progressively attenuated for the future years. The annual number of cases is projected to increase substantially from 2015 to 2040 across all racial groups. Considerable variation in incidence and mortality trends was observed both between and within racial groups when considering histology. As the US population undergoes demographic changes, incidence of endometrial cancer is projected to rise. The increase will occur in all racial groups, but larger increases will be seen in aggressive histology subtypes that disproportionately affect black women.

3. Preschool Drawing and School Mathematics: The Nature of the Association

Science.gov (United States)

Malanchini, Margherita; Tosto, Maria G.; Garfield, Victoria; Dirik, Aysegul; Czerwik, Adrian; Arden, Rosalind; Malykh, Sergey; Kovas, Yulia

2016-01-01

The study examined the etiology of individual differences in early drawing and of its longitudinal association with school mathematics. Participants (N = 14,760), members of the Twins Early Development Study, were assessed on their ability to draw a human figure, including number of features, symmetry, and proportionality. Human figure drawing was…

4. The Creative Drawing process

DEFF Research Database (Denmark)

Flensborg, Ingelise

The creative drawing process Associated Professor Ingelise Flensborg, PhD The Danish University school of Education, Aarhus University Tuborgvej 164 København NV   Why are children's drawings important for the development of cognitive structures and for their development in a visual society......'s. It is a pattern of actions as well as a pattern for action    In my doctoral thesis I discussed the connection between spatial orientation and visual representation (as a form of knowledge). I wanted to show the developmental possibilities within spatial cognition in art-education. I used the dynamic theory......, which is supposed to be our most basic cognitive structure. The body's interaction with the environment is decisive for children's spatial representations. In my theoretical and empirical investigations I found that this interaction creates the basic form of cognitive structures. The child...

5. Animated construction of line drawings

KAUST Repository

Fu, Hongbo

2011-12-01

Revealing the sketching sequence of a line drawing can be visually intriguing and used for video-based storytelling. Typically this is enabled based on tedious recording of artists\\' drawing process. We demonstrate that it is often possible to estimate a reasonable drawing order from a static line drawing with clearly defined shape geometry, which looks plausible to a human viewer. We map the key principles of drawing order from drawing cognition to computational procedures in our framework. Our system produces plausible animated constructions of input line drawings, with no or little user intervention. We test our algorithm on a range of input sketches, with varying degree of complexity and structure, and evaluate the results via a user study. We also present applications to gesture drawing synthesis and drawing animation creation especially in the context of video scribing.

6. Animated construction of line drawings

KAUST Repository

Fu, Hongbo

2011-12-01

Revealing the sketching sequence of a line drawing can be visually intriguing and used for video-based storytelling. Typically this is enabled based on tedious recording of artists\\' drawing process. We demonstrate that it is often possible to estimate a reasonable drawing order from a static line drawing with clearly defined shape geometry, which looks plausible to a human viewer. We map the key principles of drawing order from drawing cognition to computational procedures in our framework. Our system produces plausible animated constructions of input line drawings, with no or little user intervention. We test our algorithm on a range of input sketches, with varying degree of complexity and structure, and evaluate the results via a user study. We also present applications to gesture drawing synthesis and drawing animation creation especially in the context of video scribing. © 2011 ACM.

7. A NEW TEACHING METHOD OF TECHNICAL DRAWING

Directory of Open Access Journals (Sweden)

TOMA Ana-Maria

2017-05-01

Full Text Available The paper represents a project of applied research, on how to teach more effectively the subject of technical drawing, using Student - centred education methods. The authors applied a new method of interaction with the students and teaching during a semester and the conclusions were drawn comparing the final results of the classes on which this project was applied with the ones where the classical method of teaching was applied.

8. Thalamocortical Projection Neuron and Interneuron Numbers in the Visual Thalamic Nuclei of the Adult C57BL/6 Mouse.

Science.gov (United States)

Evangelio, Marian; García-Amado, María; Clascá, Francisco

2018-01-01

A key parameter to constrain predictive, bottom-up circuit models of a given brain domain is the number and position of the neuronal populations involved. These include not only the neurons whose bodies reside within the domain, but also the neurons in distant regions that innervate the domain. The mouse visual cortex receives its main subcortical input from the dorsal lateral geniculate nucleus (dLGN) and the lateral posterior (LP) complex of the thalamus. The latter consists of three different nuclei: lateral posterior lateral (LPL), lateral posterior medial rostral (LPMR), and lateral posterior medial caudal (LPMC), each exhibiting specific patterns of connections with the various visual cortical areas. Here, we have determined the number of thalamocortical projection neurons and interneurons in the LP complex and dLGN of the adult C57BL/6 male mouse. We combined Nissl staining and histochemical and immunolabeling methods for consistently delineating nuclei borders, and applied unbiased stereological cell counting methods. Thalamic interneurons were identified using GABA immunolabeling. The C57BL/6 dLGN contains ∼21,200 neurons, while LP complex contains ∼31,000 total neurons. The dLGN and LP are the only nuclei of the mouse dorsal thalamus containing substantial numbers GABA-immunoreactive interneurons. These interneurons, however, are scarcer than previously estimated; they are 5.6% of dLGN neurons and just 1.9% of the LP neurons. It can be thus inferred that the dLGN contains ∼20,000 and the LP complex ∼30,400 thalamocortical projection neurons (∼12,000 in LPL, 15,200 in LPMR, and 4,200 in LPMC). The present dataset is relevant for constraining models of mouse visual thalamocortical circuits, as well as for quantitative comparisons between genetically modified mouse strains, or across species.

9. PARAMETRIC DRAWINGS VS. AUTOLISP

OpenAIRE

PRUNĂ Liviu; SLONOVSCHI Andrei

2015-01-01

In this paper the authors make a critical analysis of the advantages offered by the parametric drawing use by comparison with the AutoLISP computer programs used when it comes about the parametric design. Studying and analysing these two work models the authors have got to some ideas and conclusions which should be considered in the moment in that someone must to decide if it is the case to elaborate a software, using the AutoLISP language, or to establish the base rules that must be followed...

10. Drawing experts have better visual memory while drawing.

Science.gov (United States)

Perdreau, Florian; Cavanagh, Patrick

2015-01-01

Drawing involves frequent shifts of gaze between the original and the drawing and visual memory helps compare the original object and the drawing across these gaze shifts while creating and correcting the drawing. It remains unclear whether this memory encodes all of the object or only the features around the current drawing position and whether both the original and the copy are equally well represented. To address these questions, we designed a "drawing" experiment coupled with a change detection task. A polygon was displayed on one screen and participants had to copy it on another, with the original and the drawing presented in alternation. At unpredictable moments during the copying process, modifications were made on the drawing and the original figure (while they were not in view). Participants had to correct their drawing every time they perceived a change so that their drawing always matched the current original figure. Our results show a better memory representation of the original figure than of the drawing, with locations relevant to the current production most accurately represented. Critically, experts showed better memory for both the original and the drawing than did novices, suggesting that experts have specialized advantages for encoding visual shapes.

11. International overcommitment draws warning

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that after rushing to take advantage of new opportunities offered by governments around the world, the international petroleum industry may be overcommitted. Cooperation among countries and companies in the next 2 years will be required if a lot of grief is to be avoided, says an international petroleum financing consultant. To respond adequately to the cash crisis, industry must: reduce internal costs; reduce project costs; lay off project obligations; sell noncore assets; renegotiate license obligations; and slow down, scale down projects; and finance projects

12. Report on FY 2000 project for drawing district energy-saving visions for Village of Satomi; 2000 nendo Satomi-mura chiiki sho energy vision sakutei nado jigy hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The district energy-saving visions are drawn for Village of Satomi, aimed at construction of an energy-saving, resources-recycling type farming village in mountains, friendly to the environments, and the implementation organization is established. The activities include (1) questionnaire survey for energy saving, with the questionnaires sent to the citizens and enterprises, (2) actual situations of energy consumption, (3) setting the hardware and software targets achievable in 5 years, (4) setting the projects for introducing energy-saving facilities, and (5) establishment of the energy-saving spreading committee, and drawing the action programs. Insufficient practices are pointed out, and necessity for the spread/enlightenment activities are clarified. At the same time, it is estimated that the energy consumption can be potentially reduced by 8% in 5 years. It is decided to introduce a co-generation system in the biomass recycling center, systems for photovoltaic power generation and production of hot water by solar heat in the integrated day-care center, and wind power system in Plateau Satomi. (NEDO)

13. Animated construction of line drawings

KAUST Repository

Fu, Hongbo; Zhou, Shizhe; Liu, Ligang; Mitra, Niloy J.

2011-01-01

Revealing the sketching sequence of a line drawing can be visually intriguing and used for video-based storytelling. Typically this is enabled based on tedious recording of artists' drawing process. We demonstrate that it is often possible

14. Czech Children's Drawing of Nature

Science.gov (United States)

Yilmaz, Zuhal; Kubiatko, Milan; Topal, Hatice

2012-01-01

Do world children draw nature pictures in a certain way? Range of mountains in the background, a sun, couple clouds, a river rising from mountains. Is this type of drawing universal in the way these nature items are organized on a drawing paper? The sample size from Czech Republic included 33 participants from two kindergartens. They were 5 and 6…

15. Drawing in architectural lighting design

NARCIS (Netherlands)

Skipetari, A.; Nijhuis, S.

2011-01-01

Drawing is an important tool for lighting designers. Not only as a means of visual communication but also to aid visual thinking. As a process and product, drawing is a constituent part of the overall lighting design process, from concept to realisation. The emphasis is usually placed on drawing as

16. Summary of experience from a large number of construction inspections; Wind power plant projects; Erfarenhetsaaterfoering fraan entreprenadbesiktningar

Energy Technology Data Exchange (ETDEWEB)

2010-08-15

This report presents a summary of experience from a large number of construction inspections of wind power projects. The working method is based on the collection of construction experience in form of questionnaires. The questionnaires were supplemented by a number of in-depth interviews to understand more in detail what is perceived to be a problem and if there were suggestions for improvements. The results in this report is based on inspection protocols from 174 wind turbines, which corresponds to about one-third of the power plants built in the time period. In total the questionnaires included 4683 inspection remarks as well as about one hundred free text comments. 52 of the 174 inspected power stations were rejected, corresponding to 30%. It has not been possible to identify any over represented type of remark as a main cause of rejection, but the rejection is usually based on a total number of remarks that is too large. The average number of remarks for a power plant is 27. Most power stations have between 20 and 35 remarks. The most common remarks concern shortcomings in marking and documentation. These are easily adjusted, and may be regarded as less serious. There are, however, a number of remarks which are recurrent and quite serious, mainly regarding gearbox, education and lightning protection. Usually these are also easily adjusted, but the consequences if not corrected can be very large. The consequences may be either shortened life of expensive components, e.g. oil problems in gear boxes, or increased probability of serious accidents, e.g. maladjusted lightning protection. In the report, comparison between power stations with various construction period, size, supplier, geography and topography is also presented. The general conclusion is that the differences are small. The results of the evaluation of questionnaires correspond well with the result of the in-depth interviews with clients. The problem that clients agreed upon as the greatest is the lack

17. Architectural Drawing - an Animate Field

DEFF Research Database (Denmark)

Hougaard, Anna Katrine

2015-01-01

Architectural drawing is changing because architects today draw with computers. Due to this change digital diagrams employed by computational architectural practices are often emphasized as powerful structures of control and organisation in the design process. But there are also diagrams, which do...... ways of directing behaviour of artefacts and living things without controlling this behaviour completely. I analyse a musical composition by John Cage as an example of a sketch diagram, and then hypothesize that orthogonal, architectural drawing can work in similar ways. Thereby I hope to point out...... important affordance of architectural drawing as a ¬hybrid between the openness of hand-sketching and the rule-based-ness of diagramming, an affordance which might be useful in the migrational zone of current architectural drawing where traditional hand drawing techniques and computer drawing techniques...

18. Predicting galling behaviour in deep drawing processes

NARCIS (Netherlands)

van der Linde, G.

2011-01-01

Deep drawing is a sheet metal forming process which is widely used in, for example, the automotive industry. With this process it is possible to form complex shaped parts of sheet metal and it is suitable for products that have to be produced in large numbers. The tools for this process are required

19. Mixing during draw-off in small SDHW systems

DEFF Research Database (Denmark)

Andersen, Elsa; Furbo, Simon

1998-01-01

The aim of the project is to determine a maximum acceptable mixing rate during hot water tappings, so called draw-offs. Based on a pervious proposal for a maximum acceptable decrease of thermal performance due to mixing during draw-off, investigations are carried out in order to determine the mix...

20. Project TANDEM (Tsunamis in the Atlantic and the English ChaNnel: Definition of the Effects through numerical Modeling) (2014-2018): a French initiative to draw lessons from the Tohoku-oki tsunami on French coastal nuclear facilities

Science.gov (United States)

Hébert, Hélène; Abadie, Stéphane; Benoit, Michel; Créach, Ronan; Frère, Antoine; Gailler, Audrey; Garzaglia, Sébastien; Hayashi, Yutaka; Loevenbruck, Anne; Macary, Olivier; Marcer, Richard; Morichon, Denis; Pedreros, Rodrigo; Rebour, Vincent; Ricchiuto, Mario; Silva Jacinto, Ricardo; Terrier, Monique; Toucanne, Samuel; Traversa, Paola; Violeau, Damien

2014-05-01

TANDEM (Tsunamis in the Atlantic and the English ChaNnel: Definition of the Effects through numerical Modeling) is a French research project dedicated to the appraisal of coastal effects due to tsunami waves on the French coastlines, with a special focus on the Atlantic and Channel coastlines, where French civil nuclear facilities have been operating since about 30 years. This project aims at drawing conclusions from the 2011 catastrophic tsunami, and will allow, together with a Japanese research partner, to design, adapt and validate numerical methods of tsunami hazard assessment, using the outstanding database of the 2011 tsunami. Then the validated methods will be applied to estimate, as accurately as possible, the tsunami hazard for the French Atlantic and Channel coastlines, in order to provide guidance for risk assessment on the nuclear facilities. The project TANDEM follows the recommendations of International Atomic Energy Agency (IAEA) to analyse the tsunami exposure of the nuclear facilities, as well as the recommendations of the French Nuclear Safety Authority (Autorité de Sûreté Nucléaire, ASN) in the aftermath of the 2011 catastrophe, which required the licensee of nuclear facilities to conduct complementary safety assessments (CSA), also including "the robustness beyond their design basis". The tsunami hazard deserves an appraisal in the light of the 2011 catastrophe, to check whether any unforeseen tsunami impact can be expected for these facilities. TANDEM aims at defining the tsunami effects expected for the French Atlantic and Channel coastlines, basically from numerical modeling methods, through adaptation and improvement of numerical methods, in order to study tsunami impacts down to the interaction with coastal structures (thus sometimes using 3D approaches) (WP1). Then the methods will be tested to better characterize and quantify the associated uncertainties (in the source, the propagation, and the coastal impact) (WP2). The project will

1. Noise, sampling, and the number of projections in cone-beam CT with a flat-panel detector

International Nuclear Information System (INIS)

Zhao, Z.; Gang, G. J.; Siewerdsen, J. H.

2014-01-01

Purpose: To investigate the effect of the number of projection views on image noise in cone-beam CT (CBCT) with a flat-panel detector. Methods: This fairly fundamental consideration in CBCT system design and operation was addressed experimentally (using a phantom presenting a uniform medium as well as statistically motivated “clutter”) and theoretically (using a cascaded systems model describing CBCT noise) to elucidate the contributing factors of quantum noise (σ Q ), electronic noise (σ E ), and view aliasing (σ view ). Analysis included investigation of the noise, noise-power spectrum, and modulation transfer function as a function of the number of projections (N proj ), dose (D tot ), and voxel size (b vox ). Results: The results reveal a nonmonotonic relationship between image noise andN proj at fixed total dose: for the CBCT system considered, noise decreased with increasing N proj due to reduction of view sampling effects in the regime N proj proj due to increased electronic noise. View sampling effects were shown to depend on the heterogeneity of the object in a direct analytical relationship to power-law anatomical clutter of the form κ/f  β —and a general model of individual noise components (σ Q , σ E , and σ view ) demonstrated agreement with measurements over a broad range in N proj , D tot , and b vox . Conclusions: The work elucidates fairly basic elements of CBCT noise in a manner that demonstrates the role of distinct noise components (viz., quantum, electronic, and view sampling noise). For configurations fairly typical of CBCT with a flat-panel detector (FPD), the analysis reveals a “sweet spot” (i.e., minimum noise) in the rangeN proj ∼ 250–350, nearly an order of magnitude lower in N proj than typical of multidetector CT, owing to the relatively high electronic noise in FPDs. The analysis explicitly relates view aliasing and quantum noise in a manner that includes aspects of the object (“clutter”) and imaging chain

2. On astronomical drawing [1846

Science.gov (United States)

Smyth, Charles Piazzi

Reprinted from the Memoirs of the Royal Astronomical Society 15, 1846, pp. 71-82. With annotations and illustrations added by Klaus Hentschel. The activities of the Astronomer Royal for Scotland, Charles Piazzi Smyth (1819-1900), include the triangulation of South African districts, landscape painting, day-to-day or tourist sketching, the engraving and lithographing of prominent architectural sites, the documentary photography of the Egyptian pyramids or the Tenerife Dragon tree, and instant photographs' of the clouds above his retirement home in Clova, Ripon. His colorful records of the aurora polaris, and solar and terrestrial spectra all profited from his trained eye and his subtle mastery of the pen and the brush. As his paper on astronomical drawing, which we chose to reproduce in this volume, amply demonstrates, he was conversant in most of the print technology repertoire that the 19th century had to offer, and carefully selected the one most appropriate to each sujet. For instance, he chose mezzotint for the plates illustrating Maclear's observations of Halley's comet in 1835/36, so as to achieve a rich profundity of shadows, the deep obscurity of which is admirably adapted to reproduce those fine effects of chiaroscuro frequently found in works where the quantity of dark greatly predominates.'' The same expertise with which he tried to emulate Rembrandt's chiaroscuro effects he applied to assessing William and John Herschel's illustrations of nebulae, which appeared in print between 1811 and 1834. William Herschel's positive engraving, made partly by stippling and partly by a coarse mezzotint, receives sharp admonishment because of the visible ruled crossed lines in the background and the fact that the objects, which are also generally too light, [have] a much better definition than they really possess.'' On the other hand, John Herschel's illustration of nebulae and star clusters, given in negative, in which the lights are the darkest part of the

3. Drawing expression of autistic child

OpenAIRE

SOLDÁTOVÁ, Barbora

2016-01-01

The presented thesis deals with drawing of children with autism. It is divided into two parts, the theoretical and the empirical. In the theoretical parts there are four chapters. Three chapters deal with problem of autism spectrum disorders, types of autism, options of diagnostics, frequency and possible causes of autism. The fourth chapter deals with basic information about children's drawing, unique manifestation of the autistic disablement in the children's drawing. In the empirical part ...

4. DrawFromDrawings: 2D Drawing Assistance via Stroke Interpolation with a Sketch Database.

Science.gov (United States)

Matsui, Yusuke; Shiratori, Takaaki; Aizawa, Kiyoharu

2017-07-01

We present DrawFromDrawings, an interactive drawing system that provides users with visual feedback for assistance in 2D drawing using a database of sketch images. Following the traditional imitation and emulation training from art education, DrawFromDrawings enables users to retrieve and refer to a sketch image stored in a database and provides them with various novel strokes as suggestive or deformation feedback. Given regions of interest (ROIs) in the user and reference sketches, DrawFromDrawings detects as-long-as-possible (ALAP) stroke segments and the correspondences between user and reference sketches that are the key to computing seamless interpolations. The stroke-level interpolations are parametrized with the user strokes, the reference strokes, and new strokes created by warping the reference strokes based on the user and reference ROI shapes, and the user study indicated that the interpolation could produce various reasonable strokes varying in shapes and complexity. DrawFromDrawings allows users to either replace their strokes with interpolated strokes (deformation feedback) or overlays interpolated strokes onto their strokes (suggestive feedback). The other user studies on the feedback modes indicated that the suggestive feedback enabled drawers to develop and render their ideas using their own stroke style, whereas the deformation feedback enabled them to finish the sketch composition quickly.

5. Stages of Drawing and Intelligence

National Research Council Canada - National Science Library

Kavanagh, Fintan

1998-01-01

Children's drawings follow a developmental sequence. Beginning with uncontrolled scribble, children progress to controlled scribble, through basic forms, to increasingly sophisticated modes of representation...

6. [Teenagers' drawings in transcultural consultations].

Science.gov (United States)

Simon, Amalini; Titia Rizzi, Alice

The place of teenagers' drawings has been studied as part of a transcultural consultation, based on the creativity of the children of migrants. When speaking is difficult, drawings enable teenagers to show another dimension of their internal world. Aravin, a young Tamil boy, who lacked the necessary words, was able to express all the complexity of his thoughts through his drawings, finally being able to formulate in the group the difficult situations which he was drawing. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

DEFF Research Database (Denmark)

Bærentzen, Jakob Andreas; Nielsen, Steen Lund; Gjøl, Mikkel

2008-01-01

In this paper, we first argue that drawing lines on polygons is harder than it may appear. We then propose two novel and robust techniques for a special case of this problem, namely wireframe drawing. Neither method suffers from the well-known artifacts associated with the standard two pass, offset...... based techniques for wireframe drawing. Both methods draw prefiltered lines and produce high-quality antialiased results without super-sampling. The first method is a single pass technique well suited for convex N-gons for small N (in particular quadrilaterals or triangles). It is demonstrated...

8. Engineering drawing from the beginning

CERN Document Server

Cousins, M F

1970-01-01

Engineering Drawing from the Beginning, Volume 2 discusses the methods for communicating technical engineering concepts through illustrations and drawings. This volume covers the more advance techniques in engineering drawing. The coverage of the text includes the helix, which is the path traced by a point moving uniformly around the surface of a right cylinder that is moving axially. The book also covers drawings of solid objects such as prisms, pyramids, and cones, along with hollow objects made from sheet material. In Chapter 5, the text presents the conventional representations of common

9. Machines and Signs A History of the Drawing of Machines

CERN Document Server

Rovida, Edoardo

2013-01-01

This volume addresses the cultural, technical and ethical motivations of the history of drawing of machines and its developments step by step. First it treats drawings without any technical character; then the Renaissance with its new forms of drawing; the 18th century, with orthographic projections, immediately used by industry; the 19th century, including the applications of drawing in industry; and the 20th century, with the standardization institutions and the use of the computer. The role of historical drawings and archives in modern design is also examined. This book is of value to all those who are interested in technical drawing, either from an artistic, from a design, or from an engineering point of view.

10. Drawing-to-Learn: A Framework for Using Drawings to Promote Model-Based Reasoning in Biology

Science.gov (United States)

Quillin, Kim; Thomas, Stephen

2015-01-01

The drawing of visual representations is important for learners and scientists alike, such as the drawing of models to enable visual model-based reasoning. Yet few biology instructors recognize drawing as a teachable science process skill, as reflected by its absence in the Vision and Change report’s Modeling and Simulation core competency. Further, the diffuse research on drawing can be difficult to access, synthesize, and apply to classroom practice. We have created a framework of drawing-to-learn that defines drawing, categorizes the reasons for using drawing in the biology classroom, and outlines a number of interventions that can help instructors create an environment conducive to student drawing in general and visual model-based reasoning in particular. The suggested interventions are organized to address elements of affect, visual literacy, and visual model-based reasoning, with specific examples cited for each. Further, a Blooming tool for drawing exercises is provided, as are suggestions to help instructors address possible barriers to implementing and assessing drawing-to-learn in the classroom. Overall, the goal of the framework is to increase the visibility of drawing as a skill in biology and to promote the research and implementation of best practices. PMID:25713094

11. How to draw a planarization

NARCIS (Netherlands)

Bläsius, T.; Radermacher, M.; Rutter, I.; Steffen, B.; Baier, C.; van den Brand, M.; Eder, J.; Hinchey, M.; Margaria, T.

2017-01-01

We study the problem of computing straight-line drawings of non-planar graphs with few crossings. We assume that a crossing-minimization algorithm is applied first, yielding a planarization, i.e., a planar graph with a dummy vertex for each crossing, that fixes the topology of the resulting drawing.

12. Drawing Links within Dental Education

Science.gov (United States)

Wright, J.

2017-01-01

This study examines results of a practical drawing task given to a cohort of first year dental surgery students at Kings College Dental Institute, London. It compares and relates their success in drilling and removing caries and pulp tissue from a virtual tooth using the hapTEL virtual learning system, with each individuals' drawing skills.…

13. Architectural Drawing - an Animate Field

DEFF Research Database (Denmark)

Hougaard, Anna Katrine

2015-01-01

Architectural drawing is changing because architects today draw with computers. Due to this change digital diagrams employed by computational architectural practices are often emphasized as powerful structures of control and organisation in the design process. But there are also diagrams, which d...

14. Drawing subway maps : a survey

NARCIS (Netherlands)

Wolff, A.

2007-01-01

This paper deals with automating the drawing of subway maps. There are two features of schematic subway maps that make them different from drawings of other networks such as flow charts or organigrams. First, most schematic subway maps use not only horizontal and vertical lines, but also diagonals.

15. Number names and number understanding

DEFF Research Database (Denmark)

Ejersbo, Lisser Rye; Misfeldt, Morten

2014-01-01

This paper concerns the results from the first year of a three-year research project involving the relationship between Danish number names and their corresponding digits in the canonical base 10 system. The project aims to develop a system to help the students’ understanding of the base 10 syste...... the Danish number names are more complicated than in other languages. Keywords: A research project in grade 0 and 1th in a Danish school, Base-10 system, two-digit number names, semiotic, cognitive perspectives....

16. Setting up crowd science projects

NARCIS (Netherlands)

Scheliga, Kaja; Friesike, Sascha; Puschmann, Cornelius; Fecher, Benedikt

2016-01-01

Crowd science is scientific research that is conducted with the participation of volunteers who are not professional scientists. Thanks to the Internet and online platforms, project initiators can draw on a potentially large number of volunteers. This crowd can be involved to support data-rich or

17. Drawing cure: children's drawings as a psychoanalytic instrument.

Science.gov (United States)

Wittmann, Barbara

2010-01-01

This essay deals with the special case of drawings as psychoanalytical instruments. It aims at a theoretical understanding of the specific contribution made by children's drawings as a medium of the psychical. In the influential play technique developed by Melanie Klein, drawing continuously interacts with other symptomatic (play) actions. Nonetheless, specific functions of drawing within the play technique can be identified. The essay will discuss four crucial aspects in-depth: 1) the strengthening of the analysis's recursivity associated with the graphic artifact; 2) the opening of the analytic process facilitated by drawing; 3) the creation of a genuinely graphic mode of producing meaning that allows the child to develop a "theory" of the workings of his own psychic apparatus; and 4) the new possibilities of symbolization associated with the latter. In contrast to classical definitions of the psychological instrument, the child's drawing is a weakly structured tool that does not serve to reproduce psychic processes in an artificial, controlled setting. The introduction of drawing into the psychoanalytic cure is by no means interested in replaying past events, but in producing events suited to effecting a transformation of the synchronic structures of the unconscious.

18. I Draw Therefore I Am: Drawing as Visual (Communication Studies

Directory of Open Access Journals (Sweden)

2013-11-01

Full Text Available This paper sets view to consider the significance of drawings as part of visual communication design. Drawing gives a chance to observe, to muse, to select and develop continuous thinking techniques. It is to present that drawing is not just a cursory to generate ideas, but it has its own energy and philosophy which deserve studying as a domain of art. In recent years, drawing has received attention; there is on the one hand a group of drawing practitioners, and on the other hand a group of drawing researchers. Drawing in design is a medium of visual and spatial thinking. Digging into research actually is a necessity for visual communication studies. It is suggested here three kinds of research approaches: research into art/design; research through art/design; and research for art/design. Indeed, it leads to four axis topics (topoi for design studies: design practice, design product, design discourse, and design meta-discourse. A field of study called ‘visual culture’ which, departed from the study of critical theory and cultural studies which have set out relatively new field of study called ‘visual studies’. Based upon to this perspective, visual (communication studies should be more self-reflexive. The production of visual communication contributes to construct the visual culture in society.

19. Spent nuclear fuel project multi-year work plan WBS {number_sign}1.4.1

Energy Technology Data Exchange (ETDEWEB)

Wells, J.L.

1997-03-01

The Spent Nuclear Fuel (SNF) Project Multi-Year Work Plan (MYWP) is a controlled living document that contains the current SNF Project Technical, Schedule and Cost Baselines. These baselines reflect the current Project execution strategies and are controlled via the change control process. Other changes to the MYWP document will be controlled using the document control process. These changes will be processed as they are approved to keep the MYWP a living document. The MYWP will be maintained continuously as the project baseline through the life of the project and not revised annually. The MYWP is the one document which summarizes and links these three baselines in one place. Supporting documentation for each baseline referred to herein may be impacted by changes to the MYWP, and must also be revised through change control to maintain consistency.

20. Preschool Drawing and School Mathematics: The Nature of the Association.

Science.gov (United States)

Malanchini, Margherita; Tosto, Maria G; Garfield, Victoria; Dirik, Aysegul; Czerwik, Adrian; Arden, Rosalind; Malykh, Sergey; Kovas, Yulia

2016-05-01

The study examined the etiology of individual differences in early drawing and of its longitudinal association with school mathematics. Participants (N = 14,760), members of the Twins Early Development Study, were assessed on their ability to draw a human figure, including number of features, symmetry, and proportionality. Human figure drawing was moderately stable across 6 months (average r = .40). Individual differences in drawing at age 4½ were influenced by genetic (.21), shared environmental (.30), and nonshared environmental (.49) factors. Drawing was related to later (age 12) mathematical ability (average r = .24). This association was explained by genetic and shared environmental factors that also influenced general intelligence. Some genetic factors, unrelated to intelligence, also contributed to individual differences in drawing. © 2016 The Authors. Child Development © 2016 Society for Research in Child Development, Inc.

1. Preschool Drawing and School Mathematics: The Nature of the Association

Science.gov (United States)

Malanchini, M.; Tosto, M.G.; Garfield, V.; Czerwik, A.; Dirik, A.; Arden, R.; Malykh, S.

2016-01-01

The study examined the aetiology of individual differences in early drawing and of its longitudinal association with school mathematics. Participants (N = 14,760), members of the Twins Early Development Study, were assessed on their ability to draw a human figure, including number of features, symmetry and proportionality. Human figure drawing was moderately stable across six months (average r = .40). Individual differences in drawing at age 4½ were influenced by genetic (.21), shared environmental (.30) and non-shared environmental (.49) factors. Drawing was related to later (age 12) mathematical ability (average r = .24). This association was explained by genetic and shared environmental factors that also influenced general intelligence. Some genetic factors, unrelated to intelligence, also contributed to individual differences in drawing. PMID:27079561

2. CDD CERN Drawings Directory User's manual Version 1.1

CERN Document Server

Delamare, Christophe; Jeannin, F; Petit, S

1996-01-01

CDD (CERN Drawings Directory) is a multi-platform utility which manages engineering drawings made in any division at CERN. The aim of CDD is not to store the graphical drawing itself, but to store a reference with some information related to the drawing. Access to this data is provided via a graphical user interface which is based upon ORACLE Forms and via WWW. Drawings following different numbering systems and different management rules can be handled by CDD. The only condition is that those particular functionalities are well defined. Several drawing systems have been identified in CERN and therefore considered when designing the application. The current version of CDD focuses on systems EST, LEP, ST-IE, SPS, ST-CE and the experiments ALICE, ATLAS, CMS and LHCb. Other CERN systems could be easily integrated upon demand.

3. Drawing Millions of Spaces

DEFF Research Database (Denmark)

Brabrand, Helle

2017-01-01

a flat surface in actual space for projection of line-, photo-, and video effects, and then, out of this surface-context, provoke a participator to move and extract different atmospheric perspectives. Presently, the work is presented as a video. In The Art-Architecture Complex Hal Foster criticizes what...... of process - movement - time. Asking very basic architectural questions, his focus is on elevation, on what happens to your body when the elevation is shifting: how do you cut into space, gather the land in a volume, and hold that volume? Serra’s concern is moving body-space experiences: ‘when you face...... a concave shape, the whole breadth of the curvilinear volume opens up in front of you; but once you walk around the edge, it changes to an opaque convexity that reveals itself only through walking – you can’t see the openness of the field or how the volume sucks into it. Just turning the corner opens up...

4. Influence of asymmetrical drawing radius deviation in micro deep drawing

Science.gov (United States)

Heinrich, L.; Kobayashi, H.; Shimizu, T.; Yang, M.; Vollertsen, F.

2017-09-01

Nowadays, an increasing demand for small metal parts in electronic and automotive industries can be observed. Deep drawing is a well-suited technology for the production of such parts due to its excellent qualities for mass production. However, the downscaling of the forming process leads to new challenges in tooling and process design, such as high relative deviation of tool geometry or blank displacement compared to the macro scale. FEM simulation has been a widely-used tool to investigate the influence of symmetrical process deviations as for instance a global variance of the drawing radius. This study shows a different approach that allows to determine the impact of asymmetrical process deviations on micro deep drawing. In this particular case the impact of an asymmetrical drawing radius deviation and blank displacement on cup geometry deviation was investigated for different drawing ratios by experiments and FEM simulation. It was found that both variations result in an increasing cup height deviation. Nevertheless, with increasing drawing ratio a constant drawing radius deviation has an increasing impact, while blank displacement results in a decreasing offset of the cups geometry. This is explained by different mechanisms that result in an uneven cup geometry. While blank displacement leads to material surplus on one side of the cup, an unsymmetrical radius deviation on the other hand generates uneven stretching of the cups wall. This is intensified for higher drawing ratios. It can be concluded that the effect of uneven radius geometry proves to be of major importance for the production of accurately shaped micro cups and cannot be compensated by intentional blank displacement.

5. Analysis of Florida Department Of Transportation Transit Corridor Program/Projects: Technical Memorandum Number Three - General Recommendations

Science.gov (United States)

2001-03-01

CUTR interviewed FDOT personnel at both the Central Office and Distict Offices and agency personnel to discuss the strengths and weaknesses of the overall Transit Corridor Program, including the results of specific projects, as well as the FDOT proce...

6. Cutting costs without drawing blood.

Science.gov (United States)

Copeland, T

2000-01-01

When looking for ways to cut costs, most managers reach for the head-count hatchet, and the markets usually roar with approval. But a company can almost always create far more sustainable value by rigorously evaluating the small-ticket capital items that often get rubber-stamped. Drawing on his experience as a consultant and providing numerous anecdotes, the author contends that those "little" requests often prove to be gold plated or unnecessary. A disciplined evaluation involves asking only eight questions and conducting postmortems--regular audits of units' capital spending. But the payoff is enormous. Because cutting the capital budget increases cash flow, the author argues that a permanent cut of just 15% in the planned level of capital spending could boost some companies' market capitalization by as much as 30%. The first three questions--Is this your investment to make? Does it really have to be new? How are our competitors meeting compliance needs?--are asked of operating managers as they assemble capital project requests. The next three are asked by senior managers of themselves and their colleagues as they examine proposals: Is the left hand duplicating investments made by the right? Are trade-offs between profit and capital spending well understood? Are there signs of budget massage? At the end of the review process, senior managers ask: Are we fully using shared assets? How fine-grained are our capacity measures? The author's suggestions for the postmortem include searching for systematic problems with whole classes of expenditures and making sure audit teams come up with specific recommendations for change.

7. Contracts for field projects and supporting research on enhanced oil recovery. Progress review number 86, quarter ending March 31, 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-05-01

Summaries are presented for 37 enhanced oil recovery contracts being supported by the Department of Energy. The projects are grouped into gas displacement methods, thermal recovery methods, geoscience technology, reservoir characterization, and field demonstrations in high-priority reservoir classes. Each summary includes the objectives of the project and a summary of the technical progress, as well as information on contract dates, size of award, principal investigator, and company or facility doing the research.

8. Animated construction of line drawings

KAUST Repository

Fu, Hongbo; Zhou, Shizhe; Liu, Ligang; Mitra, Niloy J.

2011-01-01

system produces plausible animated constructions of input line drawings, with no or little user intervention. We test our algorithm on a range of input sketches, with varying degree of complexity and structure, and evaluate the results via a user study

9. HippoDraw and Hippoplotamus

International Nuclear Information System (INIS)

Gravina, M.F.; Kunz, P.F.; Pavel, T.J.; Rensing, P.E.

1992-02-01

Hippo Draw is a result of research into finding better ways to visualize the kind of statistical data that is so common in high energy physics analyses. In these analyses, frequency distributions are visualized as histograms, contour plots, scatter plots, etc. Traditionally, one used a library of subroutines, called a histogram package, within one's analysis programs to create and display such distributions. HippoDraw is a NeXTstep application for viewing statistical data. It has several unique features which make viewing data distributions highly interactive. It also incorporates simple drawing tools. HippoDraw is written in Objective-C and uses the Hippoplotamus library package which handles the n-tuples and displays. Hippoplotamus is written in ANSI C. 4 refs

10. Strings draw theorists together

International Nuclear Information System (INIS)

Green, Michael

2000-01-01

has been learned about the non-perturbative extension of string theory now known as ''M theory'' and this has shed light on many previously mysterious aspects of quantum field theory. The range of new and potentially important developments is indeed impressive. One example is the accumulation of results on the role of ''noncommutative geometry'' in string theory. Another major theme of the meeting was the new ideas on how string theory may describe observed physics, such as the forces and particles in nature and their properties. The recent work by Lisa Randall of Princeton University and Raman Sundrum of Boston University is a variant of the ''brane world'' idea that has come to the fore over the past couple of years. According to this idea, which was reviewed by Randall at the conference, our four-dimensional universe can be thought of as a membrane (known as a three-brane) that is embedded inside a higher-dimensional universe. The number of higher dimensions is predicted by the structure of string theory. The possible consequences of this are striking. For example, in such a universe the fundamental energy scale of the theory may be much smaller than the Planck energy of 10 19 GeV. Indeed, the scale could be so small that it will be accessible to direct experimental observation using the next generation of accelerators, such as the Large Hadron Collider that is currently under construction at CERN. This theme was further developed by Steven Hawking, who conjectured on how such a universe might have evolved from the initial quantum state that preceded the big bang. One of the most exciting developments over the past few years has been in understanding how so-called Yang-Mills gauge theories - the bread and butter of the Standard Model of particle physics - are related to quantum gravity by string theory. Particularly important is the so-called ''Maldacena correspondence'', first developed by Juan Maldacena of Harvard University. This correspondence gives an explicit

11. Reflective Drawing as a Tool for Reflection in Design Research

Science.gov (United States)

Calvo, Mirian

2017-01-01

This article explores the role of drawing as a tool for reflection. It reports on a PhD research project that aims to identify and analyse the value that co-design processes can bring to participants and their communities. The research is associated with Leapfrog, a three-year project funded by the UK Arts and Humanities Research Council (AHRC).…

12. FOX: A Fault-Oblivious Extreme-Scale Execution Environment Boston University Final Report Project Number: DE-SC0005365

Energy Technology Data Exchange (ETDEWEB)

Appavoo, Jonathan [Boston Univ., MA (United States)

2013-03-17

Exascale computing systems will provide a thousand-fold increase in parallelism and a proportional increase in failure rate relative to today's machines. Systems software for exascale machines must provide the infrastructure to support existing applications while simultaneously enabling efficient execution of new programming models that naturally express dynamic, adaptive, irregular computation; coupled simulations; and massive data analysis in a highly unreliable hardware environment with billions of threads of execution. The FOX project explored systems software and runtime support for a new approach to the data and work distribution for fault oblivious application execution. Our major OS work at Boston University focused on developing a new light-weight operating systems model that provides an appropriate context for both multi-core and multi-node application development. This work is discussed in section 1. Early on in the FOX project BU developed infrastructure for prototyping dynamic HPC environments in which the sets of nodes that an application is run on can be dynamically grown or shrunk. This work was an extension of the Kittyhawk project and is discussed in section 2. Section 3 documents the publications and software repositories that we have produced. To put our work in context of the complete FOX project contribution we include in section 4 an extended version of a paper that documents the complete work of the FOX team.

13. Strings draw theorists together

Energy Technology Data Exchange (ETDEWEB)

Green, Michael [Department of Applied Mathematics and Theoretical Physics, University of Cambridge, Cambridge (United Kingdom)

2000-03-01

string theorists over the past decade. Much has been learned about the non-perturbative extension of string theory now known as ''M theory'' and this has shed light on many previously mysterious aspects of quantum field theory. The range of new and potentially important developments is indeed impressive. One example is the accumulation of results on the role of ''noncommutative geometry'' in string theory. Another major theme of the meeting was the new ideas on how string theory may describe observed physics, such as the forces and particles in nature and their properties. The recent work by Lisa Randall of Princeton University and Raman Sundrum of Boston University is a variant of the ''brane world'' idea that has come to the fore over the past couple of years. According to this idea, which was reviewed by Randall at the conference, our four-dimensional universe can be thought of as a membrane (known as a three-brane) that is embedded inside a higher-dimensional universe. The number of higher dimensions is predicted by the structure of string theory. The possible consequences of this are striking. For example, in such a universe the fundamental energy scale of the theory may be much smaller than the Planck energy of 10{sup 19} GeV. Indeed, the scale could be so small that it will be accessible to direct experimental observation using the next generation of accelerators, such as the Large Hadron Collider that is currently under construction at CERN. This theme was further developed by Steven Hawking, who conjectured on how such a universe might have evolved from the initial quantum state that preceded the big bang. One of the most exciting developments over the past few years has been in understanding how so-called Yang-Mills gauge theories - the bread and butter of the Standard Model of particle physics - are related to quantum gravity by string theory. Particularly important is the so-called &apos

14. 37 CFR 1.152 - Design drawings.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Design drawings. 1.152... Design drawings. The design must be represented by a drawing that complies with the requirements of § 1... are not permitted in a design drawing. Photographs and ink drawings are not permitted to be combined...

15. Human figure drawings as a measure of children's emotional status: critical review for practice.

Science.gov (United States)

Skybo, Theresa; Ryan-Wenger, Nancy; Su, Ying-Hwa

2007-02-01

Human figure drawing is a common measurement that is used in practice and research. Drawing is a fun, inexpensive, and easy-to-administer method used to provide school-age children a projective means of expressing attitudes and emotions. As cognition matures, the content of drawing develops. The inclusion of emotional indicators in drawing signifies possible emotional problems. Recently, drawing has been used in countries and cultures other than the United States. Drawing can be implemented in any setting by all health care professionals.

16. GKIN: a tool for drawing genetic networks

Directory of Open Access Journals (Sweden)

Jonathan Arnold

2012-03-01

Full Text Available We present GKIN, a simulator and a comprehensive graphical interface where one can draw the model specification of reactions between hypothesized molecular participants in a gene regulatory and biochemical reaction network (or genetic network for short. The solver is written in C++ in a nearly platform independentmanner to simulate large ensembles of models, which can run on PCs, Macintoshes, and UNIX machines, and its graphical user interface is written in Java which can run as a standalone or WebStart application. The drawing capability for rendering a network significantly enhances the ease of use of other reaction network simulators, such as KINSOLVER (Aleman-Meza et al., 2009 and enforces a correct semantic specification of the network. In a usability study with novice users, drawing the network with GKIN was preferred and faster in comparison with entry with a dialog-box guided interface in COPASI (Hoops, et al., 2006 with no difference in error rates between GKIN and COPASI in specifying the network. GKIN is freely available at http://faculty.cs.wit.edu/~ldeligia/PROJECTS/GKIN/.

17. Energy research information system (eris) projects report. volume 4, number 1. Report for December 1978-June 1979

International Nuclear Information System (INIS)

Boyd, C.A.; Jelinek, J.

1979-06-01

The goal of the Energy Research Information System (ERIS) is to provide an inventory of the energy related programs and research activities from 1974 to the present in the States of Montana, Nebraska, North Dakota, South Dakota and Wyoming. Areas of research covered include: coal, petroleum, oil shales, fission fuels, synthetic fuels, hydro-energy, renewable energy, resources, energy policy, reclamation, socioeconomic impacts, environmental impacts and land use. Each project description lists title, investigator(s), research institution, sponsor, funding, time frame, location, a descriptive abstract of the research and the titles of reports and/or publications generated by the research. All projects are indexed by location, personal names, organizations and subject keywords

18. Increasing the Number of Outpatients Receiving Spiritual Assessment: A Pain and Palliative Care Service Quality Improvement Project.

Science.gov (United States)

Gomez-Castillo, Blanca J; Hirsch, Rosemarie; Groninger, Hunter; Baker, Karen; Cheng, M Jennifer; Phillips, Jayne; Pollack, John; Berger, Ann M

2015-11-01

Spirituality is a patient need that requires special attention from the Pain and Palliative Care Service team. This quality improvement project aimed to provide spiritual assessment for all new outpatients with serious life-altering illnesses. Percentage of new outpatients receiving spiritual assessment (Faith, Importance/Influence, Community, Address/Action in care, psychosocial evaluation, chaplain consults) at baseline and postinterventions. Interventions included encouraging clinicians to incorporate adequate spiritual assessment into patient care and implementing chaplain covisits for all initial outpatient visits. The quality improvement interventions increased spiritual assessment (baseline vs. postinterventions): chaplain covisits (25.5% vs. 50%), Faith, Importance/Influence, Community, Address/Action in care completion (49% vs. 72%), and psychosocial evaluation (89% vs. 94%). Improved spiritual assessment in an outpatient palliative care clinic setting can occur with a multidisciplinary approach. This project also identifies data collection and documentation processes that can be targeted for improvement. Published by Elsevier Inc.

19. Polynomial reconstruction of radial catalyst concentration distribution in an experimental type FCC riser for a low number of transversal projections in gamma ray tomography

International Nuclear Information System (INIS)

Melo, Silvio B.; Simoes, Francisco P.M.; Oliveira, Eric F. de; Santos, Maria das Gracas dos; Dantas, Carlos C.

2007-01-01

In the FCC - Fluid Catalytic Cracking process the Riser is an opaque cylinder, so that, in order to investigate the catalyst concentration inside, a gamma- ray based tomography is employed. Each section is submitted to a parallel beam and by means of the Beer-Lambert transmission is calculated. This tomography session is repeated from different angles, in manual tomographic experiments where the source/detector pair is rotated, producing in each direction what we called a transversal projection. In order to reconstruct the concentration of the present catalyst in a given moment some methods use successfully the inverse Radon transform through the filtered back-projection algorithm. The results are fully satisfactory for a large number of projections, widely seen as better than those produced by the algebraic methods. For a low number of projections, however, the algebraic methods become more competitive. In practice, simple experimental set-ups work with less than 10 projections, due to the time taken by the whole process. In this work, we present an investigation of polynomial reconstructions by using Bezier surfaces of arbitrary degree, adjusted to the experimental data through a least squares method. A computational algorithm was developed to implement the mathematical reconstruction for the 3D graphics presentation. (author)

20. Reduction in Design Stability Number of Monolayer Armour Units for Singular Conditions of Projects in Rubble Mound Breakwaters

Directory of Open Access Journals (Sweden)

Hugo Juan Donini

2015-07-01

Full Text Available The evaluation of concrete single layer of breakwaters is based on the application of design coefficients obtained in laboratory tests, primarily two-dimensional and under controlled conditions. With the experience of more than 30 years in structures of this type in the world, it is important to compare the values of stability numbers used in the design with those who are in breakwaters as built. In this paper, update and increase the data collected with respect to previous publications, developing an analysis of particular situations in which the amour layer stability coefficients are reduced. A series of Accropode® and Core-LocTM recommendations concerning the design elements is also made. Also there are conclusions related to increases in the volume and the reduction in the number of blocks needed for different numbers of stability proposed.

1. Accuracy of Dual-Energy Virtual Monochromatic CT Numbers: Comparison between the Single-Source Projection-Based and Dual-Source Image-Based Methods.

Science.gov (United States)

Ueguchi, Takashi; Ogihara, Ryota; Yamada, Sachiko

2018-03-21

To investigate the accuracy of dual-energy virtual monochromatic computed tomography (CT) numbers obtained by two typical hardware and software implementations: the single-source projection-based method and the dual-source image-based method. A phantom with different tissue equivalent inserts was scanned with both single-source and dual-source scanners. A fast kVp-switching feature was used on the single-source scanner, whereas a tin filter was used on the dual-source scanner. Virtual monochromatic CT images of the phantom at energy levels of 60, 100, and 140 keV were obtained by both projection-based (on the single-source scanner) and image-based (on the dual-source scanner) methods. The accuracy of virtual monochromatic CT numbers for all inserts was assessed by comparing measured values to their corresponding true values. Linear regression analysis was performed to evaluate the dependency of measured CT numbers on tissue attenuation, method, and their interaction. Root mean square values of systematic error over all inserts at 60, 100, and 140 keV were approximately 53, 21, and 29 Hounsfield unit (HU) with the single-source projection-based method, and 46, 7, and 6 HU with the dual-source image-based method, respectively. Linear regression analysis revealed that the interaction between the attenuation and the method had a statistically significant effect on the measured CT numbers at 100 and 140 keV. There were attenuation-, method-, and energy level-dependent systematic errors in the measured virtual monochromatic CT numbers. CT number reproducibility was comparable between the two scanners, and CT numbers had better accuracy with the dual-source image-based method at 100 and 140 keV. Copyright © 2018 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

2. Sunspot drawings handwritten character recognition method based on deep learning

Science.gov (United States)

Zheng, Sheng; Zeng, Xiangyun; Lin, Ganghua; Zhao, Cui; Feng, Yongli; Tao, Jinping; Zhu, Daoyuan; Xiong, Li

2016-05-01

High accuracy scanned sunspot drawings handwritten characters recognition is an issue of critical importance to analyze sunspots movement and store them in the database. This paper presents a robust deep learning method for scanned sunspot drawings handwritten characters recognition. The convolution neural network (CNN) is one algorithm of deep learning which is truly successful in training of multi-layer network structure. CNN is used to train recognition model of handwritten character images which are extracted from the original sunspot drawings. We demonstrate the advantages of the proposed method on sunspot drawings provided by Chinese Academy Yunnan Observatory and obtain the daily full-disc sunspot numbers and sunspot areas from the sunspot drawings. The experimental results show that the proposed method achieves a high recognition accurate rate.

3. Iwahashi Zenbei's Sunspot Drawings in 1793 in Japan

Science.gov (United States)

Hayakawa, Hisashi; Iwahashi, Kiyomi; Tamazawa, Harufumi; Toriumi, Shin; Shibata, Kazunari

2018-01-01

Three Japanese sunspot drawings associated with Iwahashi Zenbei (1756 - 1811) are shown here from contemporary manuscripts and woodprint documents with the relevant texts. We reveal the observational date of one of the drawings to be 26 August 1793, and the overall observations lasted for over a year. Moreover, we identify the observational site for the dated drawing as Fushimi in Japan. We then compare Zenbei's observations with the group sunspot number and the raw group count from the Sunspot Index and Long-term Solar Observations (SILSO) to reveal the context of the data, and we conclude that these drawings fill gaps in our understanding that are due to the fragmental sunspot observations around 1793. These drawings are important as a clue to evaluate astronomical knowledge of contemporary Japan in the late eighteenth century and are valuable as a non-European observation, considering that most sunspot observations up to the middle of the nineteenth century are from Europe.

4. School-age children's fears, anxiety, and human figure drawings.

Science.gov (United States)

Carroll, M K; Ryan-Wenger, N A

1999-01-01

The purpose of this study was to identify the fears of school-age children and determine the relationship between fear and anxiety. A descriptive, correlational, secondary analysis study was conducted using a convenience sample of 90 children between the ages of 8 and 12 years. Each child was instructed to complete the Revised Children's Anxiety Scale and then answer questions from a structured interview. On completion, each child was instructed to draw a human figure drawing. Frequency charts and correlational statistics were used to analyze the data. Findings indicated that the most significant fears of the boys were in the categories of animals, safety, school, and supernatural phenomena, whereas girls were more fearful of natural phenomena. High correlations existed between anxiety scores and the number of fears and emotional indicators on human figure drawings. Because human figure drawings are reliable tools for assessing anxiety and fears in children, practitioners should incorporate these drawings as part of their routine assessments of fearful children.

5. Electroplastic drawing of stainless steels

International Nuclear Information System (INIS)

Troitskij, O.A.; Spitsyn, V.I.; Sokolov, N.V.; Ryzhkov, V.G.

1977-01-01

Effect of electroplastic drawing on mechanical, magnetic and electrical properties of wire of 12Kh18N10T and Kh13N13M2 steels was studied. Pulse, direct and alternating currents were used. Direct and alternating current densities were 400 A/mm 2 , mean density of pulse current was 200 A/mm 2 . The investigations have shown that the current density increase results in decreasing the wire strengthening intensity though in increasing plastic properties. As a result of electroplastic drawing the growth of magnetic characteristics of wire occurs

6. JaxoDraw: A graphical user interface for drawing Feynman diagrams

Science.gov (United States)

Binosi, D.; Theußl, L.

2004-08-01

JaxoDraw is a Feynman graph plotting tool written in Java. It has a complete graphical user interface that allows all actions to be carried out via mouse click-and-drag operations in a WYSIWYG fashion. Graphs may be exported to postscript/EPS format and can be saved in XML files to be used for later sessions. One of JaxoDraw's main features is the possibility to create ? code that may be used to generate graphics output, thus combining the powers of ? with those of a modern day drawing program. With JaxoDraw it becomes possible to draw even complicated Feynman diagrams with just a few mouse clicks, without the knowledge of any programming language. Program summaryTitle of program: JaxoDraw Catalogue identifier: ADUA Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADUA Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Distribution format: tar gzip file Operating system: Any Java-enabled platform, tested on Linux, Windows ME, XP, Mac OS X Programming language used: Java License: GPL Nature of problem: Existing methods for drawing Feynman diagrams usually require some 'hard-coding' in one or the other programming or scripting language. It is not very convenient and often time consuming, to generate relatively simple diagrams. Method of solution: A program is provided that allows for the interactive drawing of Feynman diagrams with a graphical user interface. The program is easy to learn and use, produces high quality output in several formats and runs on any operating system where a Java Runtime Environment is available. Number of bytes in distributed program, including test data: 2 117 863 Number of lines in distributed program, including test data: 60 000 Restrictions: Certain operations (like internal latex compilation, Postscript preview) require the execution of external commands that might not work on untested operating systems. Typical running time: As an interactive program, the running time depends on the complexity

7. Handbook of graph drawing and visualization

CERN Document Server

Tamassia, Roberto

2013-01-01

Planarity Testing and Embedding Maurizio PatrignaniCrossings and Planarization Christoph Buchheim, Markus Chimani, Carsten Gutwenger, Michael Jünger, and Petra MutzelSymmetric Graph Drawing Peter Eades and Seok-Hee HongProximity Drawings Giuseppe LiottaTree Drawing Algorithms Adrian RusuPlanar Straight-Line Drawing Algorithms Luca VismaraPlanar Orthogonal and Polyline Drawing Algorithms Christian A. Duncan and Michael T. GoodrichSpine and Radial Drawings Emilio Di Giacomo, Walter Didimo, and Giuseppe LiottaCircular Drawing Algorithms Janet M. Six and Ioannis G. TollisRectangular Drawing Algori

8. Studying Meaning in Children' Drawings

Science.gov (United States)

2010-01-01

This paper reports on an ethnographic study conducted with two Year 1 classes in two different Norwegian schools. In total, 35 five- and six-year-old children were involved in the study and were observed over a two-month period as they engaged in learning activities that involved drawing. Building on Kress and Van Leeuwen's (1996) theory of a…

9. Drawing Analogies to Deepen Learning

Science.gov (United States)

Fava, Michelle

2017-01-01

This article offers examples of how drawing can facilitate thinking skills that promote analogical reasoning to enable deeper learning. The instructional design applies cognitive principles, briefly described here. The workshops were developed iteratively, through feedback from student and teacher participants. Elements of the UK National…

10. Human Figure Drawings in Perspective.

Science.gov (United States)

Naglieri, Jack A.

1993-01-01

Responds to previous article (Motta, Little, and Tobin, this issue) which reviewed data-based studies on figure drawings and found little support for their validity or use in assessing personality, behavior, emotion, or intellectual functioning. Contends that article is unacceptable for publication in present form, with main criticism being that…

11. Drawing-to-learn: a framework for using drawings to promote model-based reasoning in biology.

Science.gov (United States)

Quillin, Kim; Thomas, Stephen

2015-03-02

12. The Roles of Emotional Comprehension and Representational Drawing Skill in Children's Expressive Drawing

Science.gov (United States)

Brechet, Claire; Jolley, Richard P.

2014-01-01

The purpose of the present study was to investigate the roles of emotional comprehension and representational drawing skill in children's expressive drawing. Fifty 7- to 10-year-olds were asked to produce two (happy and sad) expressive drawings, two representational drawings (drawing of a man running and drawing of a house) and to answer the…

13. Characterization equipment essential/support drawing plan

International Nuclear Information System (INIS)

WILSON, G.W.

1999-01-01

The purpose of this document is to list the Characterization equipment drawings that are classified as Essential Drawings and Support Drawings. Essential Drawings: Are those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment (HNF 1997a). Support Drawings: Are those drawings identified by facility staff that further describe the design details of structures, systems, or components shown on essential drawings. (HNF 1997a) The Characterization equipment drawings identified in this report are deemed essential drawings as defined in HNF-PRO-242, Engineering Drawing Requirements (HNF 1997a). These drawings will be prepared, revised, and maintained per HNF-PRO-440, Engineering Document Change Control (HNF 1997b). All other Characterization equipment drawings not identified in this document will be considered General drawings until the Characterization Equipment Drawing Evaluation Report (Wilson 1998) is updated during fiscal year 1999. Trucks 1 and 2 drawings are not included in this revision of the essential drawing list due to uncertainty about future use

14. Science and scientists in the drawings of European children

Directory of Open Access Journals (Sweden)

Paola Rodari

2007-09-01

Full Text Available The first step of the SEDEC project has been a survey on teachers and pupils perception of science, scientists, and the European dimension of science. Different research actions have been organized for the different targets, and have been held in the six countries involved in the project: Czech Republic, France, Italy, Portugal, Poland and Romania. This article will present the analysis of more then 1000 drawings realized by 9 and 14 years old pupils and representing "a scientist". Form the drawings emerge stereotypes, fears, desires, expectations and more, a whole imaginery that has to be taken in account for an effective educative adn communicative action.

15. Applying a punch with microridges in multistage deep drawing processes.

Science.gov (United States)

Lin, Bor-Tsuen; Yang, Cheng-Yu

2016-01-01

The developers of high aspect ratio components aim to minimize the processing stages in deep drawing processes. This study elucidates the application of microridge punches in multistage deep drawing processes. A microridge punch improves drawing performance, thereby reducing the number of stages required in deep forming processes. As an example, the original eight-stage deep forming process for a copper cylindrical cup with a high aspect ratio was analyzed by finite element simulation. Microridge punch designs were introduced in Stages 4 and 7 to replace the original punches. In addition, Stages 3 and 6 were eliminated. Finally, these changes were verified through experiments. The results showed that the microridge punches reduced the number of deep drawing stages yielding similar thickness difference percentages. Further, the numerical and experimental results demonstrated good consistency in the thickness distribution.

16. Characteristics of the tree-drawing test in chronic schizophrenia.

Science.gov (United States)

Kaneda, Ayako; Yasui-Furukori, Norio; Saito, Manabu; Sugawara, Norio; Nakagami, Taku; Furukori, Hanako; Kaneko, Sunao

2010-04-01

A tree-drawing test acts as both a projective psychological examination as well as a supplementary psychodiagnostic tool. There is little information relating the characteristics of schizophrenia and the tree-drawing test. The present study compared the structural and morphological differences in the results of the tree-drawing test between schizophrenic patients and healthy individuals, as well as between schizophrenic patients who responded well to treatment and those who responded poorly. The subjects included 202 chronic schizophrenic patients and 113 healthy individuals. The schizophrenic patients were categorized as 'good responders' or 'poor responders' based on their response to medical treatments. The tree-drawing test was performed on all subjects. The tree drawn by each subject was analyzed structurally and morphologically. There were significant differences between the trunk and branches drawn by schizophrenic patients and those drawn by healthy controls. There were no significant differences between the good responders and the poor responders in any aspect of the tree drawings. Multiple regression models showed that the ratio of the tree area to the total area of the drawing paper, the width of the trunk, the trunk base opening, and the size of the branch ends were significantly associated with schizophrenia. The present study suggests that the trees drawn by schizophrenic patients are significantly different from those drawn by healthy individuals, but among schizophrenic patients, it is difficult to distinguish between good responders and poor responders using the tree-drawing test.

17. Spent nuclear fuels project: FY 1995 multi-year program plan, WBS {number_sign}1.4

Energy Technology Data Exchange (ETDEWEB)

Denning, J.L.

1994-09-01

The mission of the Spent Nuclear Fuel (SNF) program is to safely, reliably, and efficiently manage, condition, transport, and store Department of Energy (DOE)-owned SNF, so that it meets acceptance criteria for disposal in a permanent repository. The Hanford Site Spent Nuclear Fuel strategic plan for accomplishing the project mission is: Establish near-term safe storage in the 105-K Basins; Complete national Environmental Policy Act (NEPA) process to obtain a decision on how and where spent nuclear fuel will be managed on the site; Define and establish alternative interim storage on site or transport off site to support implementation of the NEPA decision; and Define and establish a waste package qualified for final disposition. This report contains descriptions of the following: Work Breakdown Structure; WBS Dictionary; Responsibility Assignment Matrix; Program Logic Diagrams; Program Master Baseline Schedule; Program Performance Baseline Schedule; Milestone List; Milestone Description Sheets; Cost Baseline Summary by Year; Basis of Estimate; Waste Type Data; Planned Staffing; and Fiscal Year Work Plan.

18. Spent nuclear fuels project: FY 1995 multi-year program plan, WBS number-sign 1.4

International Nuclear Information System (INIS)

Denning, J.L.

1994-09-01

The mission of the Spent Nuclear Fuel (SNF) program is to safely, reliably, and efficiently manage, condition, transport, and store Department of Energy (DOE)-owned SNF, so that it meets acceptance criteria for disposal in a permanent repository. The Hanford Site Spent Nuclear Fuel strategic plan for accomplishing the project mission is: Establish near-term safe storage in the 105-K Basins; Complete national Environmental Policy Act (NEPA) process to obtain a decision on how and where spent nuclear fuel will be managed on the site; Define and establish alternative interim storage on site or transport off site to support implementation of the NEPA decision; and Define and establish a waste package qualified for final disposition. This report contains descriptions of the following: Work Breakdown Structure; WBS Dictionary; Responsibility Assignment Matrix; Program Logic Diagrams; Program Master Baseline Schedule; Program Performance Baseline Schedule; Milestone List; Milestone Description Sheets; Cost Baseline Summary by Year; Basis of Estimate; Waste Type Data; Planned Staffing; and Fiscal Year Work Plan

19. Templates, Numbers & Watercolors.

Science.gov (United States)

Clemesha, David J.

1990-01-01

Describes how a second-grade class used large templates to draw and paint five-digit numbers. The lesson integrated artistic knowledge and vocabulary with their mathematics lesson in place value. Students learned how draftspeople use templates, and they studied number paintings by Charles Demuth and Jasper Johns. (KM)

20. Human figure drawings by children with Duchenne's muscular dystrophy.

Science.gov (United States)

Pope-Grattan, M M; Burnett, C N; Wolfe, C V

1976-02-01

Seventy-two human figure drawings by forty-three patients who had a diagnosis of Duchenne's muscular dystrophy were examined. The study includes a description of these human figure drawings according to eleven emotional indicators and according to directionality quadrants. When the human figure drawings were used as a projective tool, four personality traits of some of the children were identified: physical inadequacy, immaturity, body anxiety, and insecurity. Both the emotional indicators and the quadrant in which the figures appeared were examined in relation to stages of the disease process to see if the human figure drawings of the children might reflect more stress and anxiety at a particular stage of the disease. Suggestions for improvements and recommendations for future study are given.

1. Try This: Draw Like a Scientist

Science.gov (United States)

Preston, Christine

2016-01-01

Young children love to draw, and should be encouraged to explore drawing as a communication tool. Drawing is a means by which children can express their thoughts, interests and feelings, long before they learn to write. We know that: "children's drawings are vehicles for expression and communication" (Chang, 2012, p. 187). This form of…

2. 37 CFR 1.165 - Plant drawings.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Plant drawings. 1.165 Section... Plant drawings. (a) Plant patent drawings should be artistically and competently executed and must... required by the examiner. The drawing must disclose all the distinctive characteristics of the plant...

3. 37 CFR 1.437 - The drawings.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false The drawings. 1.437 Section 1... Application § 1.437 The drawings. (a) Drawings are required when they are necessary for the understanding of the invention (PCT Art. 7). (b) The physical requirements for drawings are set forth in PCT Rule 11...

4. Drawing on Curiosity: Between Two Worlds

Science.gov (United States)

Wigglesworth, Ron

2017-01-01

This narrative of my research on drawing shares my experience of relearning drawing by hand and how the act of drawing can stimulate curiosity. This article examines its potential to enhance learning/observation in science. It describes a kinaesthetic drawing methodology and addresses pedagogical solutions for overcoming a student's declaration…

5. 37 CFR 2.51 - Drawing required.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Drawing required. 2.51... COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Drawing § 2.51 Drawing required. (a) In an application under section 1(a) of the Act, the drawing of the mark must be a substantially exact representation of the mark...

6. RODOS User's Group: Final project report. Contract number: F14P- CT98-0075

Energy Technology Data Exchange (ETDEWEB)

Sinkko, K.; Ammann, M. (eds.)

2001-03-01

Prior to 1998, the development of RODOS, a decision support system designed for the management of nuclear emergencies, had been carried out almost entirely by research scientists and engineers. The end-users/operators had little or no input into this development. To redress this situation, the RODOS Users Group (RUG) was established in 1998 under a Concerted Action Contract between the European Commission and STUK. The main objectives of this group were to encourage the emergency management community to use such a system, to provide a forum for end-users to share their experience in the use of such systems and to provide feedback from the end-users to the model and system developers in regard to operational problems and required improvements. The contract, which commenced on 1st September 1998, was for a period of two years. During this period, RUG established a www homepage, planned and performed two nuclear accident exercises and held four meetings. Technically the Web page operated very well. State-of-the-art Internet technology provided an efficient communication channel at low cost. The membership of the RUG was, however, too low to maintain a lively and ongoing discussion in parallel with the RODOS project Web page. This experience would suggest that it might have been better to have operated a Web page for RUG on the RODOS project Web-site rather than an independent RUG Web-site. Exercises based on fixed accident scenarios proved to be an appropriate means of highlighting issues that needed to be discussed between users and developers and to stimulate and motivate the end-users to maintain and further develop the system. Such exercises also promoted further activity in the field of emergency management. The organisation and administration of realistic exercises are time consuming, laborious and expensive. It is therefore very important that the maximum benefit is achieved from such exercises. The use of analytical evaluation methods could be better employed

7. Feynman diagram drawing made easy

International Nuclear Information System (INIS)

Baillargeon, M.

1997-01-01

We present a drawing package optimised for Feynman diagrams. These can be constructed interactively with a mouse-driven graphical interface or from a script file, more suitable to work with a diagram generator. It provides most features encountered in Feynman diagrams and allows to modify every part of a diagram after its creation. Special attention has been paid to obtain a high quality printout as easily as possible. This package is written in Tcl/Tk and in C. (orig.)

8. Drawing Euler Diagrams with Circles

OpenAIRE

Stapleton, Gem; Zhang, Leishi; Howse, John; Rodgers, Peter

2010-01-01

Euler diagrams are a popular and intuitive visualization tool which are used in a wide variety of application areas, including biological and medical data analysis. As with other data visualization methods, such as graphs, bar charts, or pie charts, the automated generation of an Euler diagram from a suitable data set would be advantageous, removing the burden of manual data analysis and the subsequent task of drawing an appropriate diagram. Various methods have emerged that automatically dra...

9. MECHANISM TO DRAW MACLAURIN TRISECTRIX

Directory of Open Access Journals (Sweden)

Mirela CHERCIU

2013-05-01

Full Text Available It is used a geometrical method for generating Maclaurin trisectrix and based on it , thesynthesis of a mechanism that can draw it, is made. The structure of the found mechanism is R-RTRTtype, having two driving elements with correlated movements. This mechanism is analysedand the desired curve is obtained just for certain dimensions of the mechanism. The mechanism’smovement is studied based on some diagrams and different outputs are obtained for certain initialdimensions of the mechanism’s.

10. Drawing plan for solid works

International Nuclear Information System (INIS)

Lee, Kuk Hwan; Kim, Hyung Seop; Yu, Dae Won

2004-02-01

This book deals with beginning solid works 2003, setting system option, setting tool group, setting document and storing part template file. It also introduces works of basic solid works modeling such as making of square, circuit, plate washer, square column, block I, block II, link, cover plate, position block and housing. The last part explains drawing of fix block, stopper plate III, bracket, cover, belt pulley, circle plate, square, block, stopper block, angle block, washer, circle block and link.878

11. Projectables

DEFF Research Database (Denmark)

Rasmussen, Troels A.; Merritt, Timothy R.

2017-01-01

CNC cutting machines have become essential tools for designers and architects enabling rapid prototyping, model-building and production of high quality components. Designers often cut from new materials, discarding the irregularly shaped remains. We introduce ProjecTables, a visual augmented...... reality system for interactive packing of model parts onto sheet materials. ProjecTables enables designers to (re)use scrap materials for CNC cutting that would have been previously thrown away, at the same time supporting aesthetic choices related to wood grain, avoiding surface blemishes, and other...... relevant material properties. We conducted evaluations of ProjecTables with design students from Aarhus School of Architecture, demonstrating that participants could quickly and easily place and orient model parts reducing material waste. Contextual interviews and ideation sessions led to a deeper...

12. Problem and design drawing for solution of precision design drawing and machine design

International Nuclear Information System (INIS)

Heo, Gil

1982-04-01

The contents of this book are basic of design drawing, problem of machine design, problem of precision design drawing, problem of planar figure of sheet metal, design drawing for solution of machine design, design drawing for solution of precision design drawing and design drawing for planar figure of sheet metal. It tells of the problems and gives the solutions on precision design drawing and machine design.

Science.gov (United States)

Buranathiti, Thaweepat; Cao, Jian

Deep drawing process is an important process adding values to flat sheet metals in many industries. An important concern in the design of a deep drawing process generally is formability. This paper aims to present the connection between formability and inverse analysis (IA), which is a systematical means for determining an optimal blank configuration for a deep drawing process. In this paper, IA is presented and explored by using a commercial finite element software package. A number of numerical studies on the effect of blank configurations to the quality of a part produced by a deep drawing process were conducted and analyzed. The quality of the drawing processes is numerically analyzed by using an explicit incremental nonlinear finite element code. The minimum distance between elemental principal strains and the strain-based forming limit curve (FLC) is defined as tearing margin to be the key performance index (KPI) implying the quality of the part. The initial blank configuration has shown that it plays a highly important role in the quality of the product via the deep drawing process. In addition, it is observed that if a blank configuration is not greatly deviated from the one obtained from IA, the blank can still result a good product. The strain history around the bottom fillet of the part is also observed. The paper concludes that IA is an important part of the design methodology for deep drawing processes.

14. Facilitating complex shape drawing in Williams syndrome and typical development.

Science.gov (United States)

Hudson, Kerry D; Farran, Emily K

2013-07-01

Individuals with Williams syndrome (WS) produce drawings that are disorganised, likely due to an inability to replicate numerous spatial relations between parts. This study attempted to circumvent these drawing deficits in WS when copying complex combinations of one, two and three shapes. Drawing decisions were reduced by introducing a number of facilitators, for example, by using distinct colours and including facilitatory cues on the response sheet. Overall, facilitation improved drawing in the WS group to a comparable level of accuracy as typically developing participants (matched for non-verbal ability). Drawing accuracy was greatest in both groups when planning demands (e.g. starting location, line lengths and changes in direction) were reduced by use of coloured figures and providing easily distinguished and clearly grouped facilitatory cues to form each shape. This study provides the first encouraging evidence to suggest that drawing of complex shapes in WS can be facilitated; individuals with WS might be receptive to remediation programmes for drawing and handwriting. Copyright © 2013 Elsevier Ltd. All rights reserved.

15. Direct friction measurement in draw bead testing

DEFF Research Database (Denmark)

Olsson, David Dam; Bay, Niels; Andreasen, Jan Lasson

2005-01-01

The application of draw beads in sheet metal stamping ensures controlled drawing-in of flange parts. Lubrication conditions in draw beads are severe due to sliding under simultaneous bending. Based on the original draw bead test design by Nine [1] comprehensive studies of friction in draw beads...... have been reported in literature. A major drawback in all these studies is that friction is not directly measured, but requires repeated measurements of the drawing force with and without relative sliding between the draw beads and the sheet material. This implies two tests with a fixed draw bead tool...... and a freely rotating tool respectively, an approach, which inevitably implies large uncertainties due to scatter in the experimental conditions. In order to avoid this problem a new draw bead test is proposed by the authors measuring the friction force acting on the tool radius directly by a build...

16. Predicting Lotto Numbers

DEFF Research Database (Denmark)

Jørgensen, Claus Bjørn; Suetens, Sigrid; Tyran, Jean-Robert

numbers based on recent drawings. While most players pick the same set of numbers week after week without regards of numbers drawn or anything else, we find that those who do change, act on average in the way predicted by the law of small numbers as formalized in recent behavioral theory. In particular......We investigate the “law of small numbers” using a unique panel data set on lotto gambling. Because we can track individual players over time, we can measure how they react to outcomes of recent lotto drawings. We can therefore test whether they behave as if they believe they can predict lotto......, on average they move away from numbers that have recently been drawn, as suggested by the “gambler’s fallacy”, and move toward numbers that are on streak, i.e. have been drawn several weeks in a row, consistent with the “hot hand fallacy”....

17. A Study on remote sensing method for drawing up and utilizing ecological and natural map - concentrated on drawing up of Land Cover Classification Map

Energy Technology Data Exchange (ETDEWEB)

Jun, Sung Woo; Chung, Sung Moon [Korea Environment Institute, Seoul (Korea)

1998-12-01

The drawing up of ecological and natural map, which is highly efficient using remote exploration method, was promoted in this study. As the first step of drawing up of ecological and natural map, this study is working on the drawing up of Land Cover using as a base map. Through the detailed and sufficient consideration on GAP analysis of USA, CORINE project of EU, and examples in Korea, it studied and proposed the Land Cover Classification system and method suitable for Korea. It will be helpful to draw up ecological and natural map by providing two strategies and principles for land cover classification. 26 refs., 33 figs., 9 tabs.

18. Make a Drawing. Effects of Strategic Knowledge, Drawing Accuracy, and Type of Drawing on Students' Mathematical Modelling Performance

Science.gov (United States)

Rellensmann, Johanna; Schukajlow, Stanislaw; Leopold, Claudia

2017-01-01

Drawing strategies are widely used as a powerful tool for promoting students' learning and problem solving. In this article, we report the results of an inferential mediation analysis that was applied to investigate the roles that strategic knowledge about drawing and the accuracy of different types of drawings play in mathematical modelling…

19. Beyond the relativistic mean-field approximation. II. Configuration mixing of mean-field wave functions projected on angular momentum and particle number

International Nuclear Information System (INIS)

Niksic, T.; Vretenar, D.; Ring, P.

2006-01-01

The framework of relativistic self-consistent mean-field models is extended to include correlations related to the restoration of broken symmetries and to fluctuations of collective variables. The generator coordinate method is used to perform configuration mixing of angular-momentum and particle-number projected relativistic wave functions. The geometry is restricted to axially symmetric shapes, and the intrinsic wave functions are generated from the solutions of the relativistic mean-field+Lipkin-Nogami BCS equations, with a constraint on the mass quadrupole moment. The model employs a relativistic point-coupling (contact) nucleon-nucleon effective interaction in the particle-hole channel, and a density-independent δ-interaction in the pairing channel. Illustrative calculations are performed for 24 Mg, 32 S, and 36 Ar, and compared with results obtained employing the model developed in the first part of this work, i.e., without particle-number projection, as well as with the corresponding nonrelativistic models based on Skyrme and Gogny effective interactions

20. 40 CFR 35.3565 - Specific cash draw rules for authorized types of assistance from the Fund.

Science.gov (United States)

2010-07-01

... the following rules: (a) Loans—(1) Eligible project costs. A State may draw cash based on the... associated pre-project costs, cash may be drawn immediately upon execution of the loan agreement. (2) Eligible project reimbursement costs. A State may draw cash to reimburse assistance recipients for eligible...

1. Solar Imagery - Composites - Full Sun Drawings - Boulder

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Synoptic Analysis Drawings, also known as Neutral Line (NL) drawings, are produced each day by space weather forecaster at the NOAA National Weather Service (NWS)...

2. Panel draws up shopping list

CERN Multimedia

Clery, Daniel

2006-01-01

"European researchers have compiled a wish list of 35 large-scale projects that they would love to see built over the next 2 decades. The projects, which must be internationally important and open to all European researchers, include a database on the impacts of population aging, a polar research ship, and an underwater neutrino observatory." (1 page)

3. [The importance of drawing in adolescence].

Science.gov (United States)

Titia Rizzi, Alice

Teenagers like to draw. A drawing is a fundamental object of creativity in the process of re-construction and change typical of this period. However, theoretical approaches often consider that the evolution of the stages of drawing come to an end in adolescence. It is important to consider the practical and clinical benefit of drawing and to develop expression-based activities which can be carried out with this population. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

4. Drawing Architecture Theory on the City

NARCIS (Netherlands)

Altürk, E.

2009-01-01

This study is about architectural drawings. I especially address how drawings operate in architecture theory, and stress a particular role that they play in facilitating critique and speculation as theoretical activities. In this sense, I dwell on the capacity of architectural drawing not only as

5. Drawings as Representations of Children's Conceptions

Science.gov (United States)

Ehrlen, Karin

2009-01-01

Drawings are often used to obtain an idea of children's conceptions. Doing so takes for granted an unambiguous relation between conceptions and their representations in drawings. This study was undertaken to gain knowledge of the relation between children's conceptions and their representation of these conceptions in drawings. A theory of…

6. Expanding Music Listening Experience through Drawing

Science.gov (United States)

Han, Yo-Jung

2016-01-01

Drawing while listening to music provides an opportunity for students to imagine and associate, leading to holistic listening experience. The personal qualitative listening experience triggered by music can be revealed in their drawings. In the process of representing of the listening experience through drawing, students can also increase their…

7. Boundary Drawing in Clinical Work

DEFF Research Database (Denmark)

Meier, Ninna

The aim of this paper is to show how health care professionals temporarily dissolve and redraw boundaries in their everyday work, in order to coordinate clinical work and facilitate collaboration in patient pathways. Boundaries are social constructions that help us make sense of our complex, social...... world. In health care, formal boundaries are important distinctions that separate health care practitioners into medical specialties, professions and organizational departments. But clinical work also relies on the ability of health care practitioners to collaborate around patients in formal...... arrangements or emergent, temporary teams. Focusing on the cognitive and social boundaries we draw to establish identity and connection (to a profession, team or person) the paper shows how health care professionals can use inter-personal relationships to temporarily dismiss formal boundaries. By redrawing...

8. 340 and 310 drawing field verification

International Nuclear Information System (INIS)

Langdon, J.

1996-01-01

The purpose of the drawing field verification work plan is to provide reliable drawings for the 310 Treated Effluent Disposal Facility (TEDF) and 340 Waste Handling Facility (340 Facility). The initial scope of this work plan is to provide field verified and updated versions of all the 340 Facility essential drawings. This plan can also be used for field verification of any other drawings that the facility management directs to be so updated. Any drawings revised by this work plan will be issued in an AutoCAD format

9. Draw me a physicist” exhibition opens

CERN Multimedia

CERN Bulletin

2010-01-01

From 12 to 23 June, the Globe of Science and Innovation will be hosting the “Draw me a physicist” exhibition: over 160 drawings and definitions that illustrate how children see the world of research.   In a child’s imagination, scientists are colourful, slightly eccentric figures with unusual powers. This is what emerges from the exhibition on the second floor of the Globe of Science and Innovation, opening on 12 June. “Draw me a physicist” brings together 160 drawings and definitions by children about the profession of research scientist. The exhibition is the result of a six-month project by CERN and 20 primary school classes from the Pays de Gex and the communes of Meyrin, Satigny and Vernier. Some 400 schoolchildren aged 9 to 11 were asked in class to make drawings and come up with definitions of a physicist. Subsequently they came to CERN, visited one of the Laboratory’s sites, and met and interviewed some physicists. They used t...

10. Hospitalized children drawing their pain: the contents and cognitive and emotional characteristics of pain drawings.

Science.gov (United States)

Kortesluoma, Riitta-Liisa; Punamäki, Raija-Leena; Nikkonen, Merja

2008-12-01

Describing pain is difficult. Children like to draw, and through their drawing they reveal worrying issues. This study aimed to examine how hospitalized children express pain through drawings, and was carried out by examining children's thematic drawings of pain. A comparison was made between hospitalized children and healthy control groups with respect to the thematic contents and cognitive and emotional characteristics of pain drawings. The drawings were sorted in categories on the basis of content, and cognitive competence and emotional disturbances by the Draw-a-Person procedure. The hospitalized children showed a lower level of cognitive capacity than their healthy controls. The control group children revealed a higher level of emotional disturbance than the hospitalized children. The groups differed in the contents of their drawings. The drawings of the hospitalized children frequently depicted medical procedures, whereas the drawings of the healthy controls depicted more consoling human and family relations.

11. Impacts of Music on Sectional View Drawing Ability for Engineering Technology Students as Measured through Technical Drawings

Science.gov (United States)

Katsioloudis, Petros; Jones, Mildred; Jovanovic, Vukica

2016-01-01

Results from a number of studies indicate that the use of different types of music can influence cognition and behavior; however, research provides inconsistent results. Considering this, a quasi-experimental study was conducted to identify the existence of statistically significant effects on sectional view drawing ability due to the impacts of…

12. Predicting Lotto Numbers

DEFF Research Database (Denmark)

Suetens, Sigrid; Galbo-Jørgensen, Claus B.; Tyran, Jean-Robert Karl

2016-01-01

We investigate the ‘law of small numbers’ using a data set on lotto gambling that allows us to measure players’ reactions to draws. While most players pick the same set of numbers week after week, we find that those who do change react on average as predicted by the law of small numbers...... as formalized in recent behavioral theory. In particular, players tend to bet less on numbers that have been drawn in the preceding week, as suggested by the ‘gambler’s fallacy’, and bet more on a number if it was frequently drawn in the recent past, consistent with the ‘hot-hand fallacy’....

13. Drawing Contour Trees in the Plane.

Science.gov (United States)

Heine, C; Schneider, D; Carr, Hamish; Scheuermann, G

2011-11-01

The contour tree compactly describes scalar field topology. From the viewpoint of graph drawing, it is a tree with attributes at vertices and optionally on edges. Standard tree drawing algorithms emphasize structural properties of the tree and neglect the attributes. Applying known techniques to convey this information proves hard and sometimes even impossible. We present several adaptions of popular graph drawing approaches to the problem of contour tree drawing and evaluate them. We identify five esthetic criteria for drawing contour trees and present a novel algorithm for drawing contour trees in the plane that satisfies four of these criteria. Our implementation is fast and effective for contour tree sizes usually used in interactive systems (around 100 branches) and also produces readable pictures for larger trees, as is shown for an 800 branch example.

14. Line Width Recovery after Vectorization of Engineering Drawings

Directory of Open Access Journals (Sweden)

Gramblička Matúš

2016-12-01

Full Text Available Vectorization is the conversion process of a raster image representation into a vector representation. The contemporary commercial vectorization software applications do not provide sufficiently high quality outputs for such images as do mechanical engineering drawings. Line width preservation is one of the problems. There are applications which need to know the line width after vectorization because this line attribute carries the important semantic information for the next 3D model generation. This article describes the algorithm that is able to recover line width of individual lines in the vectorized engineering drawings. Two approaches are proposed, one examines the line width at three points, whereas the second uses a variable number of points depending on the line length. The algorithm is tested on real mechanical engineering drawings.

15. ONKALO - Main drawings in 2007

International Nuclear Information System (INIS)

2008-05-01

The first overall site characterisation programme for a Finnish repository of spent nuclear fuel was introduced in 1982. This programme already suggested that the site confirmation for a detailed repository design and safety assessment should include characterisation performed in an underground rock characterisation facility (URCF). This idea was confirmed during the detailed site characterisation. International views have also emphasised the importance of underground characterisation before the final decision to construct the repository is taken. The underground rock characterisation facility (ONKALO) is excavated at Olkiluoto in the municipality of Eurajoki. ONKALO should be constructed to allow characterisation work for site confirmation without jeopardising long-term safety of the repository site. It should also be possible to link ONKALO later to the repository as to a part of it. The construction of ONKALO was started in 2004 and will be completed in 2014. The characterisation work has started in ONKALO and will focus on the disposal depth. In the main drawings stage, ONKALO was described at the level of detail needed for a construction permit in 2003. This meant description of the location, final structures and final systems. This summary report describes the development of design to updated main drawings in 2007 at the same level of detail (no temporary arrangements are described). The main changes are the added exhaust air shaft and advancing the controlled area's inlet air shaft to the ONKALO phase. Also the layout and the depth of the characterisation levels have been updated according to the current bedrock information. Some buildings on the surface will house sets of equipment directly connected with underground facility and this equipment is described in this report. No buildings or other equipment are described in this report, because they are not directly connected with the underground facility. The main element of ONKALO is a system of

16. EVOLUTION IN TECHNICAL DRAWING FOR MECHANICAL PRODUCTS

OpenAIRE

GHERGHINA George; TUTUNEA Dragos; POPA Dragos

2017-01-01

Hand drawing and representation of various images engraved in stones or physical models built to scale come from the beginning of the human kind. The history of civilization presents many forms of representations based on the human imaginations. Nowadays the engineers create a technique to draw and design ideas by rules in ISO standards. If at the beginning of the last century the creation of industrial technical drawings was realized by crayon with very original results, in present, the comp...

17. A NORMATIVE STUDY OF CHILDREN'S HOUSE-TREE-PERSON DRAWINGS.

Science.gov (United States)

RAPPAPORT, SHELDON R.

THIS STUDY WAS THE FIRST PHASE OF A THREE-PART PROJECT WHOSE GOAL IS TO ESTABLISH VALID CRITERIA FOR IDENTIFYING THE HOUSE-TREE-PERSON (H-T-P) DRAWINGS OF NORMAL CHILDREN THROUGHOUT THE ELEMENTARY SCHOOL YEARS. THE SPECIFIC OBJECTIVES OF THIS STUDY WERE (1) TO IDENTIFY WHICH ITEMS OF THE H-T-P TEST CHARACTERIZE NORMAL DEVELOPMENT THROUGH GRADES 2,…

18. Design democratization with communities: Drawing toward locally meaningful design

DEFF Research Database (Denmark)

Winschiers-Goagoses, Naska; Winschiers-Theophilus, Heike; Rodil, Kasper

2012-01-01

The authors present community drawing as meaningful representations to inform locally valid technology design. They investigate recognition within and across cultural borders, thereby exposing variances of localities. The study contributes to the still scarce body of empirical work on culturally...... meaningful development of visual representations and recognition, as part of a longitudinal research project in which we co-design a 3D visualization for a specific Namibian pilot site....

19. Digital media and architectural drawings: a case study from Bramante

Directory of Open Access Journals (Sweden)

Simone Baldissini

2015-07-01

Full Text Available This paper describes the experience of disclosure of different design concepts represented in a drawing by Donato Bramante for the construction of the Basilica of San Pietro in Rome using the tools of computer graphics and the digital media. This project was included in the temporary exhibition dedicated to the Architect held at the Palladio Museum, Vicenza, from 9 November 2014 to 8 February 2015.

20. Clock Face Drawing Test Performance in Children with ADHD

Directory of Open Access Journals (Sweden)

2013-01-01

1. A national collection on the drawing board

DEFF Research Database (Denmark)

Svenningsen, Jesper

2017-01-01

Even before there was talk of a central collection of drawings and fine-art prints – what would eventually become the Royal Collection of Graphic Art in 1835 (Den kgl. Kobberstiksamling, formerly known as The Royal Collection of Prints and Drawings) – Danish drawings were already being collected...... on a grand scale. During the period 1810 to 1832, the Royal Danish Academy of Fine Arts built a large collection of recent Danish drawings, and the director of the Royal Picture Gallery, J.C. Spengler, personally collected sheets by older artists. This article delves into the history of these two...

2. Expressive drawing ability in children with autism.

Science.gov (United States)

Jolley, Richard P; O'Kelly, Rachael; Barlow, Claire M; Jarrold, Christopher

2013-03-01

The autistic impairments in emotional and social competence, imagination and generating ideas predict qualitative differences in expressive drawings by children with autism beyond that accounted by any general learning difficulties. In a sample of 60 5-19-year-olds, happy and sad drawings were requested from 15 participants with non-savant autism and compared with those drawn by three control groups matched on either degree of learning difficulty (MLD), mental age (MA) or chronological age (CA). All drawings were rated by two artists on a 7-point quality of expression scale. Contrary to our predictions, the drawings from the autistic group were rated similar to those of the MA and MLD groups. Analysis of the people and social content of the drawings revealed that although children with autism did not draw fewer people, they did draw more immature forms than mental age controls. Furthermore, there was tentative evidence that fewer social scenes were produced by the autism sample. We conclude that the overall merit of expressive drawing in autism is commensurate with their general learning difficulties, but the social/emotional impairment in autism affects their drawings of people and social scenes. © 2013 The British Psychological Society.

3. The Act and Artifact of Drawing(s): Observing Geometric Thinking with, in, and through Children's Drawings

Science.gov (United States)

Thom, Jennifer S.; McGarvey, Lynn M.

2015-01-01

In mathematics education, as in other domains, drawing serves as means to access, assess, and attend to children's understanding. While theoretical accounts of drawings are often based on developmental stage theories, we examine insights gained by considering children's geometric thinking and reasoning from embodied cognitive perspectives. We ask,…

4. Clock face drawing test performance in children with ADHD.

Science.gov (United States)

2013-01-01

5. Comfort drawing during investigative interviews: evidence of the safety of a popular practice.

Science.gov (United States)

Poole, Debra Ann; Dickinson, Jason J

2014-02-01

6. Children's Gendered Drawings of Play Behaviours

Science.gov (United States)

Akseer, Tabasum; Lao, Mary Grace; Bosacki, Sandra

2012-01-01

According to child psychologists, vital links exist between children's drawings and their emotional, social, and cognitive development. Previous research has explored the important relations between drawings and play in educational settings. Given the vast research that explores the ambiguous topic of children's play, according to Richer (1990),…

Science.gov (United States)

Instructional Objectives Exchange, Los Angeles, CA.

Eighty-five behavioral objectives and related evaluation items for mechanical drawing in grades 7 through 12 are presented. Each sample contains the objective, test items, and means for judging the adequacy of the response. The following categories are included: (1) basic drafting skills; (2) beginning lettering; (3) drawing; (4) orthographic…

8. Sources of Variability in Children's Drawings

Science.gov (United States)

Simon, Lia; Stokes, Patricia D.

2015-01-01

An experiment involving 90 students in the 1st, 3rd, and 5th grades investigated how visual examples and grade (our surrogate for age) affected variability in a drawing task. The task involved using circles as the main element in a set of drawings. There were two examples: One was simple and single (a smiley face inside a circle); the other,…

9. Representations of Loneliness in Children's Drawings

Science.gov (United States)

Misailidi, Plousia; Bonoti, Fotini; Savva, Georgia

2012-01-01

This article reports the results of a study which aimed to examine the development of children's ability to depict loneliness in their drawings. Seventy-eight children and 20 adults took part in the study. Participants were first asked a series of questions assessing their conceptions of loneliness, and were then invited to draw a picture that…

10. Expressive Drawing Ability in Children with Autism

Science.gov (United States)

Jolley, Richard P.; O'Kelly, Rachael; Barlow, Claire M.; Jarrold, Christopher

2013-01-01

The autistic impairments in emotional and social competence, imagination and generating ideas predict qualitative differences in expressive drawings by children with autism beyond that accounted by any general learning difficulties. In a sample of 60 5-19-year-olds, happy and sad drawings were requested from 15 participants with non-savant autism…

11. Equivalent drawbead performance in deep drawing simulations

NARCIS (Netherlands)

Meinders, Vincent T.; Geijselaers, Hubertus J.M.; Huetink, Han

1999-01-01

Drawbeads are applied in the deep drawing process to improve the control of the material flow during the forming operation. In simulations of the deep drawing process these drawbeads can be replaced by an equivalent drawbead model. In this paper the usage of an equivalent drawbead model in the

12. Pestalozzi and the Origins of Pedagogical Drawing.

Science.gov (United States)

Ashwin, Clive

1981-01-01

The author credits Pestalozzi with influencing most nineteenth century Continental theorists on the teaching of drawing through his theories, published circa 1800, on drawing as an essential and integral part of each child's education. He analyzes Pestalozzi's approach in the context of his life, times, and general theory of education. (Author/SJL)

13. The Wall Drawings of Egyptian Children.

Science.gov (United States)

Wilson, Brent

1982-01-01

Discusses murals done by Egyptian children. Differences in the drawing styles of American and Egyptian children are discussed. The author states that the significance of the wall drawings is that they represent a rich social setting in which children learn to produce art. (AM)

14. Development of Hydro-Mechanical Deep Drawing

DEFF Research Database (Denmark)

Zhang, Shi-Hong; Danckert, Joachim

1998-01-01

The hydro-mechanical deep-drawing process is reviewed in this article. The process principles and features are introduced and the developments of the hydro-mechanical deep-drawing process in process performances, in theory and in numerical simulation are described. The applications are summarized....... Some other related hydraulic forming processes are also dealt with as a comparison....

15. Children's Sensitivity to Expression in Drawings.

Science.gov (United States)

Winston, Andrew S.; And Others

1995-01-01

Presents three studies of children's ability to create and detect expressions of emotion in drawings. Compared to younger children, older children used more strategies, experimented with line and color, and were more likely to explore themes of death, aging, and illness. Includes sample drawings and statistical tables. (MJP)

16. Human Figure Drawings: Abusing the Abused.

Science.gov (United States)

Bardos, Achilles N.

1993-01-01

Responds to previous article (Motta, Little, and Tobin, this issue) which reviewed data-based studies on figure drawings and found little support for their validity or use in assessing personality, behavior, emotion, or intellectual functioning. Notes recent approaches to interpretation of human figure drawings and cites flaws in argument against…

17. Cognitive flexibility in drawings of bilingual children.

Science.gov (United States)

Adi-Japha, Esther; Berberich-Artzi, Jennie; Libnawi, Afaf

2010-01-01

A. Karmiloff-Smith's (1990) task of drawing a nonexistent object is considered to be a measure of cognitive flexibility. The notion of earlier emergence of cognitive flexibility in bilingual children motivated the current researchers to request 4- and 5-year-old English-Hebrew and Arabic-Hebrew bilingual children and their monolingual peers to draw a flower and a house that do not exist (N=80). Bilinguals exhibited a significantly higher rate of interrepresentational flexibility in their drawings (e.g., "a giraffe flower,"a chair-house," found in 28 of 54 drawings), whereas the level of complex intrarepresentational change was similar across groups. Interrepresentational drawings were previously reported only for children older than 7 years. The specific mechanisms by which bilinguals' language experience may lead to interrepresentational flexibility are discussed. © 2010 The Authors. Child Development © 2010 Society for Research in Child Development, Inc.

18. Drawings between Sensory Appeal and Cultural Code

DEFF Research Database (Denmark)

Nielsen, Anne Maj

to the drawing child in ways that affect the drawing. This is important to take into consideration in research. Sensory appeal and cultural codes in analysis and practice Children’s perception and visual experiences contribute to the construction and transformation of meanings and narratives as they are mediated...... to the drawing child in ways that affect the drawing and the mediation of meaning. This should be taken into consideration in research. The aim of this paper is to qualify analysis of drawings as data in empirical research and to reflect upon opportunities for aesthetic learning processes in psycho....... & Nielsen, A.M. (Eds.) Æstetiske læreprocesser – i teori og praksis. (pp. 192 – 220). København: Billesoe & Baltzer. Fink-Jensen, K. (2007). Attunement and Bodily Dialogues in Music Education. Philosophy of Music Education Review, 15, no 1, 53 - 68. Keller, C. & Keller, J.D. (1993). Thinking and acting...

19. Detectors on the drawing board

CERN Document Server

Katarina Anthony

2011-01-01

Linear collider detector developers inside and outside CERN are tackling the next generation of detector technology. While their focus has centred on high-energy linear collider detectors, their innovative concepts and designs will be applicable to any future detector.   A simulated event display in one of the new generation detectors. “While the LHC experiments remain the pinnacle of detector technology, you may be surprised to realise that the design and expertise behind them is well over 10 years old,” says Lucie Linssen, CERN’s Linear Collider Detector (LCD) project manager whose group is pushing the envelope of detector design. “The next generation of detectors will have to surpass the achievements of the LHC experiments. It’s not an easy task but, by observing detectors currently in operation and exploiting a decade’s worth of technological advancements, we’ve made meaningful progress.” The LCD team is curr...

20. The Effects of Different Drawing Materials on Children's Drawings of Positive and Negative Human Figures

Science.gov (United States)

Burkitt, Esther; Barrett, Martyn

2011-01-01

Children tend to use certain drawing strategies differentially when asked to draw topics with positive and negative emotional characterisations. These effects have however only been established when children are asked to use standard drawing materials. The present study was designed to investigate whether the above pattern of children's response…

1. Drawing out Critical Thinking: Testing the Methodological Value of Drawing Collaboratively

Science.gov (United States)

Knight, Linda; Zollo, Lyn; McArdle, Felicity; Cumming, Tamara; Bone, Jane; Ridgway, Avis; Peterken, Corinna; Li, Liang

2016-01-01

Early childhood research has long established that drawing is a central, and important activity for young children. Less common are investigations into the drawing activity of adults involved in early childhood. A team of adult early childhood researchers, with differing exposures and familiarities with drawing, experimented with intergenerational…

2. Drawing and conceiving space : how to express spatial experience through drawing?

NARCIS (Netherlands)

Schaeverbeke, R.; Aarts, H.M.T.; Heylighen, A.

2015-01-01

Teaching drawing in architectural education raises questions regarding the representation of spatial experiences: to what extent can sensory experiences of space be intensified through observing and drawing and, perhaps equally important, what those drawings would look like? In the context of their

3. News Teaching: The epiSTEMe project: KS3 maths and science improvement Field trip: Pupils learn physics in a stately home Conference: ShowPhysics welcomes fun in Europe Student numbers: Physics numbers increase in UK Tournament: Physics tournament travels to Singapore Particle physics: Hadron Collider sets new record Astronomy: Take your classroom into space Forthcoming Events

Science.gov (United States)

2010-05-01

Teaching: The epiSTEMe project: KS3 maths and science improvement Field trip: Pupils learn physics in a stately home Conference: ShowPhysics welcomes fun in Europe Student numbers: Physics numbers increase in UK Tournament: Physics tournament travels to Singapore Particle physics: Hadron Collider sets new record Astronomy: Take your classroom into space Forthcoming Events

4. Drawing helps children to talk about their presenting problems during a mental health assessment.

Science.gov (United States)

Woolford, Junie; Patterson, Tess; Macleod, Emily; Hobbs, Linda; Hayne, Harlene

2015-01-01

When children require mental health services, clinicians need to conduct assessments that are developmentally sensitive and that include the child's point of view. Drawing is a popular tool that is commonly used in clinical settings. Research on drawing in experimental settings has confirmed that the opportunity to draw while talking increases the amount of verbal information that children report during an interview. The present research examined whether drawing also facilitates children's self reports during a mental health assessment. A total of 33 5-12-year-old children were asked either to draw and tell about their presenting problem or to tell only. Children who drew and told provided twice as much verbal information as children who told only. Further, interviewers in the draw and tell condition used a greater number of minimal responses than did interviewers in the tell only condition. These data have important implications for clinical practice. © The Author(s) 2013.

5. Scientific drawing: an introduction to drawing as a language in fieldwork

Directory of Open Access Journals (Sweden)

José Mayor Iborra

2013-11-01

Full Text Available The scientific drawing understood as a universal language is a tool of undoubted documentary value as well as daily use in our field work of any professional who is with the need to register with graphics, a work process in which, need to process the drawing as coach and illustrator information. The drawings scientists have always had the vocation of fidelity and accuracy, in order to collect objective truths. The scientific drawing has been compressed and discriminating, as the reading order of the drawing through the line by providing a clear exposition that the photograph is not enough to achieve.

6. Enhancing Architectural Drawings and Models with Photoshop

CERN Document Server

Onstott, Scott

2010-01-01

Transform your CAD drawings into powerful presentationThis one-of-a-kind book shows you how to use Photoshop to turn CAD drawings and BIM models into artistic presentations with captivating animations, videos, and dynamic 3D imagery. The techniques apply to all leading architectural design software including AutoCAD, Revit, and 3ds Max Design. Video tutorials on the DVD improve your learning curve and let you compare your work with the author's.Turn CAD drawings and BIM models into powerful presentations featuring animation, videos, and 3D imagery for enhanced client appealCraft interactive pa

7. Intelligent Shimming for Deep Drawing Processes

DEFF Research Database (Denmark)

Tommerup, Søren; Endelt, Benny Ørtoft; Danckert, Joachim

2011-01-01

cavities the blank-holder force distribution can be controlled during the punch stroke. By means of a sequence of numerical simulations abrasive wear is imposed to the deep drawing of a rectangular cup. The abrasive wear is modelled by changing the tool surface geometry using an algorithm based...... on the sliding energy density. As the tool surfaces are changed the material draw-in is significantly altered when using conventional open-loop control of the blank-holder force. A feed-back controller is presented which is capable of reducing the draw-in difference to a certain degree. Further a learning...

8. Layered Graph Drawing for Visualizing Evaluation Structures.

Science.gov (United States)

2017-01-01

An evaluation structure is a hierarchical structure of human cognition extracted from interviews based on the evaluation grid method. An evaluation structure can be defined as a directed acyclic graph (DAG). The authors propose a layer-assignment method that is part of the Sugiyama framework, a popular method for drawing DAGs, to satisfy the requirements for drawing evaluation structures. Their evaluations demonstrate that the layered graph drawing produced by the proposed layer-assignment method is preferred by users and aids in the understanding of evaluation structures.

9. Children's illness drawings and asthma symptom awareness.

Science.gov (United States)

Gabriels, R L; Wamboldt, M Z; McCormick, D R; Adams, T L; McTaggart, S R

2000-01-01

This study examines the relationship between children's abilities to perceive their symptoms of asthma via several previously researched subjective and objective procedures compared with their performance on a standardized children's drawing task and scale criteria. Results indicated that girls verbalized significantly more emotions about their drawings and were better able to detect airflow changes in their small airways than boys. The Gabriels Asthma Perception Drawing Scales (GAPDS) is a promising clinical tool for assessing children's perceptions and emotions about asthma via nonverbal methods. Varying methods of measuring asthma symptom awareness are not highly correlated; thus, more than one methodology is appropriate for use with children.

10. Project Temporalities

DEFF Research Database (Denmark)

Tryggestad, Kjell; Justesen, Lise; Mouritsen, Jan

2013-01-01

Purpose – The purpose of this paper is to explore how animals can become stakeholders in interaction with project management technologies and what happens with project temporalities when new and surprising stakeholders become part of a project and a recognized matter of concern to be taken...... into account. Design/methodology/approach – The paper is based on a qualitative case study of a project in the building industry. The authors use actor-network theory (ANT) to analyze the emergence of animal stakeholders, stakes and temporalities. Findings – The study shows how project temporalities can...... multiply in interaction with project management technologies and how conventional linear conceptions of project time may be contested with the emergence of new non-human stakeholders and temporalities. Research limitations/implications – The study draws on ANT to show how animals can become stakeholders...

11. Spatial Visualization ability improves with and without studying Technical Drawing.

Science.gov (United States)

Contreras, María José; Escrig, Rebeca; Prieto, Gerardo; Elosúa, M Rosa

2018-03-27

The results of several studies suggest that spatial ability can be improved through direct training with tasks similar to those integrated in the tests used to measure the ability. However, there is a greater interest in analyzing the effectiveness of indirect training such as games or of learning subjects that involve spatial processes to a certain extent. Thus, the objective of the present study was to analyze whether the indirect training in Technical Drawing improved the Spatial Visualization ability of Architecture students. For this purpose, a group of students enrolled in Fundamentals of Architecture were administered two tests, a Spatial Visualization task and an Abstract Reasoning task, at the beginning and the end of a semester, after having received training through the subjects "Technical Drawing I: Geometry and Perception" and "Projects I." The results of this group were compared with those of a control group of students enrolled in a Mathematics degree, who were also pre-post evaluated but had not received the training in Technical Drawing. The study showed a significant pre-post improvement in both, Visualization and reasoning. However, this improvement occurred in both groups, thereby concluding that this improvement was not due to indirect training. Furthermore, no significant differences were found between men and women in any of the groups or conditions. These results clarify those of an earlier study where improvement in Visualization after training in Technical Drawing was found but did not include a comparison with a control condition. The control condition has proved to be important in order to consider the limitations of the effect of Technical Drawing on said improvement.

12. Children's human figure drawings do not measure intellectual ability.

Science.gov (United States)

Willcock, Emma; Imuta, Kana; Hayne, Harlene

2011-11-01

Children typically follow a well-defined series of stages as they learn to draw, but the rate at which they progress through these stages varies from child to child. Some experts have argued that these individual differences in drawing development reflect individual differences in intelligence. Here we assessed the validity of a drawing test that is commonly used to assess children's intellectual abilities. In a single study, 125 5- and 6-year-olds completed the Draw-A-Person: A Quantitative Scoring System (DAP:QSS) and the Wechsler Preschool and Primary Scale of Intelligence-Revised (WPPSI-R) or the Wechsler Abbreviated Scale of Intelligence (WASI). Although there was a statistically significant correlation between scores on the DAP:QSS and scores on the Wechsler tests, when the scores of individual children were examined, the DAP:QSS yielded a high number of false positives and false negatives for low intellectual functioning. We conclude that the DAP:QSS is not a valid measure of intellectual ability and should not be used as a screening tool. Copyright © 2011 Elsevier Inc. All rights reserved.

13. Sexual harassment. Where to draw the line.

Science.gov (United States)

Davidhizar, R; Erdel, S; Dowd, S

1998-02-01

Research reveals a widespread and frequently mismanaged problem--sexual harassment. Federal and state rulings, workplace guidelines and the Equal Opportunity Commission's definition of sexual harassment can help determine where to draw the line.

14. Peru - privatisation draws in major new investments

International Nuclear Information System (INIS)

Cranfield, John.

1994-01-01

The recent charges in Peru's energy sector are reported as the privatisation campaign draws to a close. Sectors covered include the splitting of the petroleum company into its components of production, refining, transport and marketing. (UK)

15. Drawing medicine out of a vial

Science.gov (United States)

... top. Then push gently on the plunger to push the air bubbles back into the vial. If you have a lot of bubbles, push the plunger to push all the medicine back into the vial. Draw medicine out again slowly ...

16. Semi-automatic drawings surveying system

International Nuclear Information System (INIS)

Andriamampianina, Lala

1983-01-01

A system for the semi-automatic survey of drawings is presented. Its design has been oriented to the reduction of the stored information required for the drawing reproduction. This equipment consists mainly of a plotter driven by a micro-computer, but the pen of the plotter is replaced by a circular photodiode array. Line drawings are first viewed as a concatenation of vectors, with constant angle between the two vectors, and then divided in arcs of circles and line segments. A dynamic analysis of line intersections with the circular sensor permits to identify starting points and end points in a line, for the purpose of automatically following connected lines in drawing. The advantage of the method described is that precision practically depends only on the plotter performance, the sensor resolution being only considered for the thickness of strokes and the distance between two strokes. (author) [fr

17. Slainless steel tube drawing on a mandrel

International Nuclear Information System (INIS)

Sokolovskij, V.I.; Parshin, V.S.; Veshkurtsev, V.I.

1976-01-01

A new technique for drawing stainless pipes on a mandrel has been developed at the Ural Polytechnical Institute. The method involves metal surfacing with a salt melt and results in stretching equal to 2.0. The use of such metal coats as lubrication sublayers makes possible repeated drawing with and without a mandrel. In both cases, the process does not involve intermediate heat treatment and/or any additional preparation of the surface

18. Forming Behaviour in Laser Shock Drawing

OpenAIRE

Schulze Niehoff, H.; Vollertsen, F.; Wielage, H.

2008-01-01

Through the continuing trend of miniaturization new cost efficient and fast methods for processing small parts are required. In this paper a new non-mechanical process for the forming process of micro deep drawing is presented. This new deep drawing process utilizes a laser initiated plasma shock wave at the target, which forms the sheet. Several pulses can be applied at one point and therefore high forming degrees can be reached without increasing the energy density. In this paper the pressu...

19. Interim Stabilization Equipment Essential and Support Drawing Plan

International Nuclear Information System (INIS)

HORNER, T.M.

2000-01-01

The purpose of this document is to list the Interim Stabilization equipment drawings that are classified as Essential or Support drawings. Essential Drawings are those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment. [CHG 2000a]. Support Drawings are those drawings identified by the facility staff that further describe the design details of structures, systems or components shown on essential drawings. [CHG 2000a

20. Interim Stabilization Equipment Essential and Support Drawing Plan

International Nuclear Information System (INIS)

KOCH, M.R.

1999-01-01

The purpose of this document is to list the Interim Stabilization equipment drawings that are classified as Essential or Support drawings. Essential Drawings: Those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment. Support Drawings: Those drawings identified by the facility staff that further describe the design details of structures, systems or components shown on essential drawings

1. Psychometric Study of the Pain Drawing.

Science.gov (United States)

Trahan, Lisa H; Cox-Martin, Emily; Johnson, Carrie E; Dougherty, Patrick M; Yu, Jun; Feng, Lei; Cook, Christina; Novy, Diane M

2017-12-01

The objectives of the study were to (1) assess the extent to which interrater reliability of pain drawing location and dispersion scoring methods are similar across pain disciplines in a sample of patients with cancer treatment-induced neuropathic pain ( N = 56) and (2) investigate indicators of validity of the pain drawing in this unique sample. Patients undergoing cancer therapy completed the Brief Pain Inventory Body Map, the MD Anderson Symptom Inventory, and the McGill Pain Questionnaire. Intraclass correlation coefficients among medical and psychology professionals ranged from .93-.99. Correlations between pain drawing score and symptom burden severity ranged from .29-.39; correlations between pain drawing score and symptom burden interference ranged from .28-.34. Patients who endorsed pain in the hands and feet more often described their pain as electric, numb, and shooting than patients without pain in the hands and feet. They also endorsed significantly more descriptors of neuropathic pain. Results suggest a similar understanding among members of a multidisciplinary pain team as to the location and dispersion of pain as represented by patients' pain drawings. In addition, pain drawing scores were related to symptom burden severity and interference and descriptors of neuropathic pain in expected ways.

2. Implementation of ISO 10110 optics drawing standards for the National Ignition Facility

International Nuclear Information System (INIS)

Aikens, D. M.; English, R. E.; Wang, D. Y.

1999-01-01

The National Ignition Facility (NIF) project elected to implement ISO 10110 standard for the specifications of NIF optics drawings in 1996. More than 7,000 NIF large optics and 20,000 NIF small optics will be manufactured based on ISO 10110 indications. ISO 10110 standard meets many of the needs of the NIF optics specifications. It allows the optical engineer to quantify and clearly communicate the desired optical specifications. While no single drawing standard specifies all the requirements of high energy laser system, a combination of ISO 10110 standard with detailed notes make it possible to apply international drawing standards to the NIF laser system. This paper will briefly describe LLNL's interpretation and implementation of the ISO 10110 drawing standard, present some examples of NIF optics drawings, and discuss pros and cons of the indications from the perspective of this application. Emphasis will be given to the surface imperfection specifications, known as 5/, for the NIF optics

3. Implementation of ISO 10110 optics drawing standards for the National Ignition Facility

Science.gov (United States)

Wang, David Y.; English, R. Edward, Jr.; Aikens, David M.

1999-11-01

The National Ignition Facility (NIF) project elected to implement ISO 10110 standard for the specifications of NIF optics drawings in 1996. More than 7,000 NIF large optics and 20,000 NIF small optics will be manufactured based on ISO 10110 indications. ISO 10110 standard meets many of the needs of the NIF optics specifications. It allows the optical engineer to quantify and clearly communicate the desired optical specifications. While no single drawing standard specifies all the requirements of high energy laser system, a combination of ISO 10110 standard with detailed notes make it possible to apply international drawing standards to the NIF laser system. This paper will briefly describe LLNL's interpretation and implementation of the ISO 10110 drawing standard, present some examples of NIF optics drawings, and discuss pros and cons of the indications from the perspective of this application. Emphasis will be given to the surface imperfection specifications, known as 5/, for the NIF optics.

4. A clinical tool for evaluating emotional well-being: self-drawings of hospitalized children.

Science.gov (United States)

Dolidze, Khatuna; Smith, Emma L; Tchanturia, Kate

2013-01-01

This study investigated how the emotional wellbeing of children with congenital heart defect (CHD) hospitalized for heart surgery was expressed in self-drawings before and after their surgical treatment. A sample of 293 children produced self-drawings (hospitalized n=168, non-hospitalized n=125). The results indicate significant differences between drawings by hospitalized compared to non-hospitalized children, including size, color and omission of body parts. These differences were interpreted in line with previous analyses of projective drawing. We conclude that self-drawing evaluation is a useful tool to reveal insights into emotional wellbeing, promoting safe and easy communication. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

5. Drawing on the right side of the brain: a voxel-based morphometry analysis of observational drawing.

Science.gov (United States)

Chamberlain, Rebecca; McManus, I Chris; Brunswick, Nicola; Rankin, Qona; Riley, Howard; Kanai, Ryota

2014-08-01

6. An exploratory study of the potential learning benefits for medical students in collaborative drawing: creativity, reflection and 'critical looking'.

Science.gov (United States)

Lyon, Philippa; Letschka, Patrick; Ainsworth, Tom; Haq, Inam

2013-06-17

Building on a series of higher educational arts/medicine initiatives, an interdisciplinary drawing module themed on the human body was developed for both year 3 Craft students and year 3 Medicine degree students. This became the subject of a research project exploring how the collaborative approach to drawing adopted on this module impacted on the students' learning. In this article, emphasis is given to issues thought to have most potential relevance to medical education. Using an ethnographic research design, the methods adopted were: direct observation of all aspects of the module sessions, audio and video recordings and photographs of the sessions, the incorporation of a semi-structured discussion at the end of each session, and anonymous student questionnaires. A number of key themes emerged. The complex, phased and multi-sensory nature of the 'critical looking' skills developed through the drawing exercises was seen as of potential value in medical education, being proposed as analogous to processes involved in clinical examination and diagnosis. The experience of interdisciplinary collaborative drawing was significant to the students as a creative, participatory and responsive form of learning. The emphasis on the physical experience of drawing and the thematic use of the human body as drawing subject led to reflective discussions about bodily knowledge and understanding. There were indications that students had a meta-cognitive awareness of the learning shifts that had occurred and the sessions provoked constructive self-reflective explorations of pre-professional identity. This preliminary study suggests, through the themes identified, that there may be potential learning outcomes for medical students in this model of interdisciplinary collaborative drawing of the human body. Further research is needed to explore their applicability and value to medical education. There is a need to explore in more depth the beliefs, motivations and learning styles of

7. Integration of the geological/engineering model with production performance for Patrick Draw Field, Wyoming

Energy Technology Data Exchange (ETDEWEB)

Jackson, S.

1993-03-01

The NIPER Reservoir Assessment and Characterization Research Program incorporates elements of the near-term, mid-term and long-term objectives of the National Energy Strategy-Advanced Oil Recovery Program. The interdisciplinary NIPER team focuses on barrier island reservoirs, a high priority class of reservoirs, that contains large amounts of remaining oil in place located in mature fields with a high number of shut-in and abandoned wells. The project objectives are to: (1) identify heterogeneities that influence the movement and trapping of reservoir fluids in two examples of shoreline barrier reservoirs (Patrick Draw Field, WY and Bell Creek Field, MT); (2) develop geological and engineering reservoir characterization methods to quantify reservoir architecture and predict mobile oil saturation distribution for application of targeted infill drilling and enhanced oil recovery (EOR) processes; and (3) summarize reservoir and production characteristics of shoreline barrier reservoirs to determine similarities and differences. The major findings of the research include: (1) hydrogeochemical analytical techniques were demonstrated to be an inexpensive reservoir characterization tool that provides information on reservoir architecture and compartmentalization; (2) the formation water salinity in Patrick Draw Field varies widely across the field and can result in a 5 to 12% error in saturation values calculated from wireline logs if the salinity variations and corresponding resistivity values are not accounted for; and (3) an analysis of the enhanced oil recovery (EOR) potential of Patrick Draw Field indicates that CO[sub 2] flooding in the Monell Unit and horizontal drilling in the Arch Unit are potential methods to recover additional oil from the field.

8. Integration of the geological/engineering model with production performance for Patrick Draw Field, Wyoming

Energy Technology Data Exchange (ETDEWEB)

Jackson, S.

1993-03-01

The NIPER Reservoir Assessment and Characterization Research Program incorporates elements of the near-term, mid-term and long-term objectives of the National Energy Strategy-Advanced Oil Recovery Program. The interdisciplinary NIPER team focuses on barrier island reservoirs, a high priority class of reservoirs, that contains large amounts of remaining oil in place located in mature fields with a high number of shut-in and abandoned wells. The project objectives are to: (1) identify heterogeneities that influence the movement and trapping of reservoir fluids in two examples of shoreline barrier reservoirs (Patrick Draw Field, WY and Bell Creek Field, MT); (2) develop geological and engineering reservoir characterization methods to quantify reservoir architecture and predict mobile oil saturation distribution for application of targeted infill drilling and enhanced oil recovery (EOR) processes; and (3) summarize reservoir and production characteristics of shoreline barrier reservoirs to determine similarities and differences. The major findings of the research include: (1) hydrogeochemical analytical techniques were demonstrated to be an inexpensive reservoir characterization tool that provides information on reservoir architecture and compartmentalization; (2) the formation water salinity in Patrick Draw Field varies widely across the field and can result in a 5 to 12% error in saturation values calculated from wireline logs if the salinity variations and corresponding resistivity values are not accounted for; and (3) an analysis of the enhanced oil recovery (EOR) potential of Patrick Draw Field indicates that CO{sub 2} flooding in the Monell Unit and horizontal drilling in the Arch Unit are potential methods to recover additional oil from the field.

9. Characterization of fine motor development: dynamic analysis of children's drawing movements.

Science.gov (United States)

Lin, Qiushi; Luo, Jianfei; Wu, Zhongcheng; Shen, Fei; Sun, Zengwu

2015-04-01

10. High-mechanical-strength single-pulse draw tower gratings

Science.gov (United States)

Rothhardt, Manfred W.; Chojetzki, Christoph; Mueller, Hans Rainer

2004-11-01

The inscription of fiber Bragg gratings during the drawing process is a very useful method to realize sensor arrays with high numbers of gratings and excellent mechanical strength and also type II gratings with high temperature stability. Results of single pulse grating arrays with numbers up to 100 and definite wavelengths and positions for sensor applications were achieved at 1550 nm and 830 nm using new photosensitive fibers developed in IPHT. Single pulse type I gratings at 1550 nm with more than 30% reflectivity were shown first time to our knowledge. The mechanical strength of this fiber with an Ormocer coating with those single pulse gratings is the same like standard telecom fibers. Weibull plots of fiber tests will be shown. At 830 nm we reached more than 10% reflectivity with single pulse writing during the fiber drawing in photosensitive fibers with less than 16 dB/km transmission loss. These gratings are useful for stress and vibration sensing applications. Type II gratings with reflectivity near 100% and smooth spectral shape and spectral width of about 1 nm are temperature stable up to 1200 K for short time. They are also realized in the fiber drawing process. These gratings are useful for temperature sensor applications.

11. 48 CFR 1952.227-77 - Rights in shop drawings.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

12. SmilesDrawer: Parsing and Drawing SMILES-Encoded Molecular Structures Using Client-Side JavaScript.

Science.gov (United States)

Probst, Daniel; Reymond, Jean-Louis

2018-01-22

Here we present SmilesDrawer, a dependency-free JavaScript component capable of both parsing and drawing SMILES-encoded molecular structures client-side, developed to be easily integrated into web projects and to display organic molecules in large numbers and fast succession. SmilesDrawer can draw structurally and stereochemically complex structures such as maitotoxin and C 60 without using templates, yet has an exceptionally small computational footprint and low memory usage without the requirement for loading images or any other form of client-server communication, making it easy to integrate even in secure (intranet, firewalled) or offline applications. These features allow the rendering of thousands of molecular structure drawings on a single web page within seconds on a wide range of hardware supporting modern browsers. The source code as well as the most recent build of SmilesDrawer is available on Github ( http://doc.gdb.tools/smilesDrawer/ ). Both yarn and npm packages are also available.

13. Drawing as Instrument, Drawings as Evidence: Capturing Mental Processes with Pencil and Paper.

Science.gov (United States)

Puglionesi, Alicia

2016-07-01

Researchers in the mind sciences often look to the production and analysis of drawings to reveal the mental processes of their subjects. This essay presents three episodes that trace the emergence of drawing as an instrumental practice in the study of the mind. Between 1880 and 1930, drawings gained currency as a form of scientific evidence - as stable, reproducible signals from a hidden interior. I begin with the use of drawings as data in the child study movement, move to the telepathic transmission of drawings in psychical research and conclude with the development of drawing as an experimental and diagnostic tool for studying neurological impairment. Despite significant shifts in the theoretical and disciplinary organisation of the mind sciences in the early twentieth century, researchers attempted to stabilise the use of subject-generated drawings as evidence by controlling the contexts in which drawings were produced and reproduced, and crafting subjects whose interiority could be effectively circumscribed. While movements such as psychoanalysis and art therapy would embrace the narrative interpretation of patient art, neuropsychology continued to utilise drawings as material traces of cognitive functions.

14. Drawing as Instrument, Drawings as Evidence: Capturing Mental Processes with Pencil and Paper

Science.gov (United States)

Puglionesi, Alicia

2016-01-01

Researchers in the mind sciences often look to the production and analysis of drawings to reveal the mental processes of their subjects. This essay presents three episodes that trace the emergence of drawing as an instrumental practice in the study of the mind. Between 1880 and 1930, drawings gained currency as a form of scientific evidence – as stable, reproducible signals from a hidden interior. I begin with the use of drawings as data in the child study movement, move to the telepathic transmission of drawings in psychical research and conclude with the development of drawing as an experimental and diagnostic tool for studying neurological impairment. Despite significant shifts in the theoretical and disciplinary organisation of the mind sciences in the early twentieth century, researchers attempted to stabilise the use of subject-generated drawings as evidence by controlling the contexts in which drawings were produced and reproduced, and crafting subjects whose interiority could be effectively circumscribed. While movements such as psychoanalysis and art therapy would embrace the narrative interpretation of patient art, neuropsychology continued to utilise drawings as material traces of cognitive functions. PMID:27292325

15. Projections of the number of Australians with disability aged 65 and over eligible for the National Disability Insurance Scheme: 2017-2026.

Science.gov (United States)

Biddle, Nicholas; Crawford, Heather

2017-12-01

To develop projections of the size of the Australian population aged 65 years and over eligible for disability support through the National Disability Insurance Scheme (NDIS) for the decade following its introduction, to support planning and costing of the scheme. We estimate disability and mortality transition probabilities and develop projections of the NDIS-eligible, ageing population from 2017 to 2026. An estimated 8000 men and 10 200 women aged 65 years and over will be eligible for support through the NDIS in 2017 (the scheme's first full year), increasing to 48 800 men and 56 900 women in 2026. Growth in the NDIS-eligible, ageing population has implications for relative budget allocations between the NDIS and the aged-care system, and projections of the size of this population are useful for calculating the overall cost of the NDIS. © 2017 AJA Inc.

16. The genesis of errors in drawing.

Science.gov (United States)

Chamberlain, Rebecca; Wagemans, Johan

2016-06-01

The difficulty adults find in drawing objects or scenes from real life is puzzling, assuming that there are few gross individual differences in the phenomenology of visual scenes and in fine motor control in the neurologically healthy population. A review of research concerning the perceptual, motoric and memorial correlates of drawing ability was conducted in order to understand why most adults err when trying to produce faithful representations of objects and scenes. The findings reveal that accurate perception of the subject and of the drawing is at the heart of drawing proficiency, although not to the extent that drawing skill elicits fundamental changes in visual perception. Instead, the decisive role of representational decisions reveals the importance of appropriate segmentation of the visual scene and of the influence of pictorial schemas. This leads to the conclusion that domain-specific, flexible, top-down control of visual attention plays a critical role in development of skill in visual art and may also be a window into creative thinking. Copyright © 2016 Elsevier Ltd. All rights reserved.

17. Drawing Myth and History in visual art

Directory of Open Access Journals (Sweden)

Jaime de Córdoba

2009-07-01

Full Text Available After the famous exhibition “Copier créer” curated by Jean Pierre Cuzin in the “Musée du Louvre” in 1993, the practice of drawing art has acquired a renovated interest. This exhibition revised the theoretical concepts introduced by Bober and others in the second half of the XXth century and increased the value of the contribution of drawing in the study of art history instead of the idea of copying. An important catalog and essay by Haverkamp, Begemann and Login, titled “Creative copies”, appeared in 1988 and contained the best examples of the main collections. The last but not least important consequence was the collaboration between international museums, using their own spaces, with contemporary artists. The hermeneutic drawings and paintings by Markus Lüpertz in the Munich Glyptotheck and the exhibition of Giacometti’s drawings shown in the IVAM in 2000 are two excellent examples of the European relevance in this field. I want to analyze here twenty years of drawing done in different museums and institutions around the world and its close relationship with the process of recovering our historical memory by using visual art.

18. Using drawing tests to explore the multidimensional psychological aspects of children with cancer.

Science.gov (United States)

Hatano, Yutaka; Yamada, Miwa; Nakagawa, Kanae; Nanri, Hiromi; Kawase, Masatoshi; Fukui, Kenji

2014-10-01

In seeking to understand how life-threatening illness affects children psychologically, projective testing may be beneficial, particularly when attempting to identify psychological problems in younger adolescents. The advantages of projective testing are that it does not depend on patients' verbal ability and is not invasive. Three cancer inpatients from Kyoto Prefectural University of Medicine, aged between 10 and 16 years old, participated in the study. Projective testing was used to measure the depth of participants' distress and included a tree-drawing test, a person-drawing test and a free drawing test. Results from the tree- and person-drawing tests indicated energy loss, anxiety and a sense of emptiness. However, results from the free drawing test suggested that the children had hope and a desire to recover from their illness. The combination of drawing tests in this study may increase the understanding of the internal psychological difficulties faced by children hospitalized with cancer. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

19. Drawing of uranium in γ phase

International Nuclear Information System (INIS)

Stohr, J.A.

1955-01-01

It describes the study of working and drawing of uranium in γ phase. In a first part, the forgeable characteristics of uranium metal in the three different phases (α, β and γ) are compared by using BASTIEN-PORTEVIN method. The different experiments are testing the behaviour metal in each phase under different stresses and a temperature gradient as slow and shock traction, slow and shock compression, resilience, flexibility. Results show that optimum conditions for uranium drawing is uranium in phase γ. In a second part, it described the drawing method and process. The uranium rods obtained by this technique are of very good quality. In addition, the material wear is very low which permits a low production cost. Finally, the uranium rod physical properties are studied. (M.P.)

20. Evaluation of the School Breakfast Program Pilot Project: Final Report. Special Nutrition Programs. Report Number CN-04-SBP. Nutrition Assistance Program Report Series

Science.gov (United States)

Bernstein, Lawrence S.; McLaughlin, Joan E.; Crepinsek, Mary Kay; Daft, Lynn M.

2004-01-01

In 1998, Congress authorized the School Breakfast Program Pilot Project (SBPP) to study the implementation and effects of providing universal free school breakfast in six school districts across the United States. For three years, from School Year (SY) 2000-2001 through SY 2002-2003, these six school districts received federal funds to offer…

1. 3rd year final contractor report for: U.S. Department of Energy Stewardship Science Academic Alliances Program Project Title: Detailed Measurements of Rayleigh-Taylor Mixing at Large and Small Atwood Numbers

International Nuclear Information System (INIS)

Malcolm J. Andrews

2006-01-01

This project had two major tasks: Task 1. The construction of a new air/helium facility to collect detailed measurements of Rayleigh-Taylor (RT) mixing at high Atwood number, and the distribution of these data to LLNL, LANL, and Alliance members for code validation and design purposes. Task 2. The collection of initial condition data from the new Air/Helium facility, for use with validation of RT simulation codes at LLNL and LANL. This report describes work done in the last twelve (12) months of the project, and also contains a summary of the complete work done over the three (3) life of the project. As of April 1, 2006, the air/helium facility (Task 1) is now complete and extensive testing and validation of diagnostics has been performed. Initial condition studies (Task 2) is also complete. Detailed experiments with air/helium with Atwood numbers up to 0.1 have been completed, and Atwood numbers of 0.25. Within the last three (3) months we have been able to successfully run the facility at Atwood numbers of 0.5. The progress matches the project plan, as does the budget. We have finished the initial condition studies using the water channel, and this work has been accepted for publication on the Journal of Fluid Mechanics (the top fluid mechanics journal). Mr. Nick Mueschke and Mr. Wayne Kraft are continuing with their studies to obtain PhDs in the same field, and will also continue their collaboration visits to LANL and LLNL. Over its three (3) year life the project has supported two(2) Ph.D.'s and three (3) MS's, and produced nine (9) international journal publications, twenty four (24) conference publications, and numerous other reports. The highlight of the project has been our close collaboration with LLNL (Dr. Oleg Schilling) and LANL (Drs. Dimonte, Ristorcelli, Gore, and Harlow)

2. Constrained Convolutional Sparse Coding for Parametric Based Reconstruction of Line Drawings

KAUST Repository

Shaheen, Sara

2017-12-25

Convolutional sparse coding (CSC) plays an essential role in many computer vision applications ranging from image compression to deep learning. In this work, we spot the light on a new application where CSC can effectively serve, namely line drawing analysis. The process of drawing a line drawing can be approximated as the sparse spatial localization of a number of typical basic strokes, which in turn can be cast as a non-standard CSC model that considers the line drawing formation process from parametric curves. These curves are learned to optimize the fit between the model and a specific set of line drawings. Parametric representation of sketches is vital in enabling automatic sketch analysis, synthesis and manipulation. A couple of sketch manipulation examples are demonstrated in this work. Consequently, our novel method is expected to provide a reliable and automatic method for parametric sketch description. Through experiments, we empirically validate the convergence of our method to a feasible solution.

3. Artistic drawing as a mnemonic device

Science.gov (United States)

Baker Christensen, Leslie

Despite art-based learning being widely used, existing data are primarily qualitative, and most research has not isolated particular variables such as memory for empirical study. The few experiments that have been conducted demonstrated that drawing improves free recall of unpaired words, and retention improves after lessons integrated with drawing, drama, and narrative exercises. To help fill the gap in the current literature, the present study compared the effectiveness of encoding and the rate of memory decay between a drawing mnemonic and note taking on a paired associates task. Using a within-subjects experimental design, participants were presented with word pairs and asked to complete either a drawing mnemonic (DM) or note taking (NT) to assist memorization. Participants were tested immediately after the word pair presentation and after a 20-minute delay. Results supported the hypothesis that the DM condition would produce superior encoding, as evidenced by greater retention on the immediate test. However, no memory decay was observed in the experiment, and therefore results on the delayed test were inconclusive. In fact, scores for the NT condition improved over time whereas the scores for the DM condition did not, which might imply that note taking results in a different consolidation process than drawing. Findings from this study suggested that arts integration can be an effective method to support memory for learned information. Future studies that examine the effect of rehearsal and the long-term effectiveness of a drawing mnemonic are warranted. This dissertation is available in open access at AURA, http://aura.antioch.edu/ and Ohio Link ETD Center, https://etd.ohiolink.edu/etd.

4. COPD depicted – patients drawing their lungs

Directory of Open Access Journals (Sweden)

Kaptein AA

2017-11-01

Full Text Available Ad A Kaptein,1 Jitske Tiemensma,2 Elizabeth Broadbent,3 Guus M Asijee,4,5 Maarten Voorhaar4,5 1Medical Psychology, Leiden University Medical Centre (LUMC, Leiden, the Netherlands; 2Psychological Sciences, University of California, Merced, CA, USA; 3Psychology Department, Auckland University Medical School, Auckland, New Zealand; 4CAPHRI School for Public Health and Primary Care, Maastricht University, Maastricht, the Netherlands; 5Boehringer Ingelheim Pharma GmbH & Co. KG, Ingelheim am Rhein, Germany Background: Given the increasing importance of patient-reported outcomes (PRO in quality medical care, we examined the value and feasibility of an innovative method for assessing patients’ illness perceptions, represented in drawings made by patients with COPD of their lungs. Aim: The aim of our study was: to study patients’ representation of COPD as reflected in their drawings of their lungs; and to examine scores on a validated measure that assesses illness perceptions (ie, Brief Illness Perception Questionnaire [B-IPQ]. Patients and methods: One hundred outpatients with COPD, mean age 70 years, selected from a pharmacy database, participated and 98 filled out the B-IPQ. Eighty-seven patients completed the drawing task. Results: The illness perceptions as reflected in the responses to the B-IPQ scales represented a quite optimistic view of COPD and its consequences. The drawings of the lungs reflected a considerable discordance between patients’ representations and medically accepted representations of lungs of a person with COPD. Conclusion: Assessing illness perceptions in clinical care and research about COPD offers opportunities to identify goals for patient education and self-management. Inviting patients to draw their illness is an innovative and promising approach to assessing PRO. Keywords: COPD, drawings, illness perceptions, PRO, quality of life, self-management

5. Understand the children's anger through tree drawing

OpenAIRE

増岡, 怜那; 高橋, 靖恵

2006-01-01

When small children (three to six years old) express their anger through inappropriate behavior or over reacting, most parents and other adults find this anger hard to deal with. That is because people see anger as a negative emotion. In actuality expressing anger can be a positive step in emotional development. In this study two kinds of tests were conducted on six years olds. The first test, [Tree drawing test] a drawing of a tree from each subject, was used to measure the individual's leve...

6. Children's Drawing of Human Figure Analisis

Directory of Open Access Journals (Sweden)

Salko Pezo

2011-08-01

Full Text Available Beside speech, that helps children to express their feelings and experiences, establish relations with people, the drawing is one of the most truthful ways of its expression. In this paper the results of pleasant and unpleasant emo­tions among children through drawing of human figure are presented. The survey is conducted on 634 children, and the results indicate that there is difference in expressing negative emotions between boys and girls, while at expressing pleasant emotions the results are similar.

7. Emotional indicators in children's human figure drawings.

Science.gov (United States)

Catte, M; Cox, M V

1999-06-01

The human figure drawings of a group of emotionally-disturbed boys were compared with those of a group of well-adjusted boys closely matched for chronological age and another for mental age. A comparison based on Koppitz's (1968) original emotional indicators and another, based on new UK norms, showed that the emotionally-disturbed children included significantly more indicators in their drawings than their well-adjusted peers. Although this difference was statistically significant it is actually quite small. In addition, there were no differences among the groups in the kinds of indicators they exhibited. The usefulness of the Koppitz test as a tool for clinical use is questioned.

8. Setting up crowd science projects.

Science.gov (United States)

Scheliga, Kaja; Friesike, Sascha; Puschmann, Cornelius; Fecher, Benedikt

2016-11-29

Crowd science is scientific research that is conducted with the participation of volunteers who are not professional scientists. Thanks to the Internet and online platforms, project initiators can draw on a potentially large number of volunteers. This crowd can be involved to support data-rich or labour-intensive projects that would otherwise be unfeasible. So far, research on crowd science has mainly focused on analysing individual crowd science projects. In our research, we focus on the perspective of project initiators and explore how crowd science projects are set up. Based on multiple case study research, we discuss the objectives of crowd science projects and the strategies of their initiators for accessing volunteers. We also categorise the tasks allocated to volunteers and reflect on the issue of quality assurance as well as feedback mechanisms. With this article, we contribute to a better understanding of how crowd science projects are set up and how volunteers can contribute to science. We suggest that our findings are of practical relevance for initiators of crowd science projects, for science communication as well as for informed science policy making. © The Author(s) 2016.

9. Drawing cartoon faces--a functional imaging study of the cognitive neuroscience of drawing.

Science.gov (United States)

Miall, R Chris; Gowen, Emma; Tchalenko, John

2009-03-01

We report a functional imaging study of drawing cartoon faces. Normal, untrained participants were scanned while viewing simple black and white cartoon line drawings of human faces, retaining them for a short memory interval, and then drawing them without vision of their hand or the paper. Specific encoding and retention of information about the faces were tested for by contrasting these two stages (with display of cartoon faces) against the exploration and retention of random dot stimuli. Drawing was contrasted between conditions in which only memory of a previously viewed face was available versus a condition in which both memory and simultaneous viewing of the cartoon were possible, and versus drawing of a new, previously unseen, face. We show that the encoding of cartoon faces powerfully activates the face-sensitive areas of the lateral occipital cortex and the fusiform gyrus, but there is no significant activation in these areas during the retention interval. Activity in both areas was also high when drawing the displayed cartoons. Drawing from memory activates areas in posterior parietal cortex and frontal areas. This activity is consistent with the encoding and retention of the spatial information about the face to be drawn as a visuo-motor action plan, either representing a series of targets for ocular fixation or as spatial targets for the drawing action.

Energy Technology Data Exchange (ETDEWEB)

Meggitt, Dallas J

2012-11-09

It is generally conceded that the costs associated with current practices for the mooring, anchoring, or foundation systems of Marine HydroKinetic (MHK) and Deepwater Floating Wind systems are a disproportionate portion of the total cost of an installed system. Reducing the cost of the mooring and anchoring components for MHK systems can contribute substantially to reducing the levelized cost of electricity (LCOE). Micropile anchors can reduce the LCOE both directly, because the anchors, associated mooring hardware and installation costs are less than conventional anchor and mooring systems, but also because micropile anchors require less extensive geotechnical surveys for confident design and proper implementation of an anchor or foundation system. This report presents the results of the development of critical elements of grouted marine micropile anchor (MMA) technology for application to MHK energy conversion systems and other ocean engineering applications that require fixing equipment to the seafloor. Specifically, this project identified grout formulations and developed designs for grout dispensing systems suitable for use in a seawater environment as a critical development need for successful implementation of practical MMA systems. The project conducted a thorough review of available information on the use of cement-based grouts in seawater. Based on this review and data available from commercial sources, the project selected a range of grout formulations for testing as part of a micropile system. The project also reviewed instrumentation for measuring grout density, pressure and flow rate, and integrated an instrumentation system suitable for use with micropile installation. The grout formulations and instrumentation system were tested successfully and demonstrated the suitability of MMA technology for implementation into anchor systems for MHK and other marine renewable energy systems. In addition, this project developed conceptual designs for micropile

11. Design Integration of Man-Machine Interface (MMI) Display Drawings and MMI Database

Energy Technology Data Exchange (ETDEWEB)

Kim, Yong Jun; Seo, Kwang Rak; Song, Jeong Woog; Kim, Dae Ho; Han, Jung A [KEPCO Engineering and Construction Co., Deajeon (Korea, Republic of)

2016-10-15

The conventional Main Control Room (MCR) was designed using hardwired controllers and analog indications mounted on control boards for control and acquisition of plant information. This is compared with advanced MCR design where Flat Panel Displays (FPDs) with soft controls and mimic displays are used. The advanced design needs MMI display drawings replacing the conventional control board layout drawings and component lists. The data is linked to related object of the MMI displays. Compilation of the data into the DB is generally done manually, which tends to introduce errors and discrepancies. Also, updating and managing is difficult due to a huge number of entries in the DB and the update must closely track the changes in the associated drawing. Therefore, automating the DB update whenever a related drawing is updated would be quite beneficial. An attempt is made to develop a new method to integrate the MMIS display drawing design and the DB management. This would significantly reduce the amount of errors and improve design quality. The design integration of the MMI Display drawing and MMI DB is explained briefly but concisely in this paper. The existing method involved individually and separately inputting design data for the MMI display drawings. This caused to the potential problem of data discrepancies and errors as well as the update time lag between related drawings and the DB. This led to development of an integration of design process which automates the design data input activity.

12. Dynamic drawing characteristics of preschool and younger school age children

Directory of Open Access Journals (Sweden)

Cvetković Andrijana

2014-01-01

Full Text Available The main objective of this research is to determine developmental characteristics of dynamic drawings of preschool and younger school age children. The sample consists of 90 typical developed children, aged between 6 and 9. The sample includes 47 (52.2% girls and 43 (47.8% boys from preschool institutions and elementary schools in Pirot and Belgrade. Action representation in dynamic drawings was evaluated using three types of drawings: a man who runs, a man shooting a ball and a man lifting a ball from the floor. We determined that a very small number of the respondents reaches the highest level of graphical representation of figures in motion, and that girl’s achievements are better than boy’s achievements. However, this result is on the border of statistical significance (p=0.052. Also, there is a statistically significant trend of progress to higher levels of action representation (p=0.000 with the increase in chronological age of the respondents.

13. Drawing and Sketching in Agricultural Mechanics.

Science.gov (United States)

Montana State Univ., Bozeman. Dept. of Agricultural and Industrial Education.

This unit of instruction on drawing and sketching in agricultural mechanics is designed especially for use with freshman vocational agriculture students. A unit plan discusses the general aims and goals, lesson titles, student and teacher activities, a list of necessary special equipment and references. The unit consists of nine lessons. A lesson…

14. Tunable metamaterials fabricated by fiber drawing

DEFF Research Database (Denmark)

Fleming, Simon; Stefani, Alessio; Tang, Xiaoli

2017-01-01

We demonstrate a practical scalable approach to the fabrication of tunable metamaterials. Designed for terahertz (THz) wavelengths, the metamaterial is comprised of polyurethane filled with an array of indium wires using the well-established fiber drawing technique. Modification of the dimensions...

15. Mixed Movements/performance-based drawing

DEFF Research Database (Denmark)

Brabrand, Helle

2010-01-01

that question each other, working as well with space-time motives as with expressions and techniques. A series poses questions both to the kind of forces it raises as well as to the kind of sensual affects it produces – to how the body resonates with the rhythms and tensions that appear in the drawing...

16. Searching for Deeper Meaning in Children's Drawings

Science.gov (United States)

Soundy, Cathleen S.

2012-01-01

Children delight in "giving voice" to their drawings. If provided the opportunity, children can express powerful and imaginative ideas and make meaning through visual and verbal modes. When adults spend time talking with children about their artwork, they see glimpses of imagination at work, as well as effective uses of language. This article will…

17. Cognitive Flexibility in Drawings of Bilingual Children

Science.gov (United States)

Adi-Japha, Esther; Berberich-Artzi, Jennie; Libnawi, Afaf

2010-01-01

A. Karmiloff-Smith's (1990) task of drawing a nonexistent object is considered to be a measure of cognitive flexibility. The notion of earlier emergence of cognitive flexibility in bilingual children motivated the current researchers to request 4- and 5-year-old English-Hebrew and Arabic-Hebrew bilingual children and their monolingual peers to…

18. Teacher experiences of generating and interpreting drawings

African Journals Online (AJOL)

I report on a phenomenological investigation into teacher experiences of generating and interpreting drawings during their participation in the Resilient Educators (REds) intervention. All 18 teacher participants came from rural communities challenged by HIV&AIDS. I reflect critically on the ambivalence in teacher ...

19. Warm Deep Drawing of Aluminium Sheet

NARCIS (Netherlands)

Bolt, P.J.; Werkhoven, R.J.; van den Boogaard, Antonius H.

2003-01-01

Aluminium sheet drawing processes can be improved by manipulating local flow behaviour by means of elevated temperatures and temperature gradients in the tooling. Forming tests showed that a substantial improvement is possible not only for 5xxx but also for 6xxx series alloys. Finite element method

20. A quantitative lubricant test for deep drawing

DEFF Research Database (Denmark)

Olsson, David Dam; Bay, Niels; Andreasen, Jan L.

2010-01-01

A tribological test for deep drawing has been developed by which the performance of lubricants may be evaluated quantitatively measuring the maximum backstroke force on the punch owing to friction between tool and workpiece surface. The forming force is found not to give useful information...

1. 9 CFR 355.5 - Drawings.

Science.gov (United States)

2010-01-01

... CERTIFICATION CERTIFIED PRODUCTS FOR DOGS, CATS, AND OTHER CARNIVORA; INSPECTION, CERTIFICATION, AND... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Drawings. 355.5 Section 355.5 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION...

2. Drawing as a user experience research tool

DEFF Research Database (Denmark)

Fleury, Alexandre

2011-01-01

such previous work, two case studies are presented, in which drawings helped investigate the relationship between media technology users and two specific devices, namely television and mobile phones. The experiment generated useful data and opened for further consideration of the method as an appropriate HCI...... research tool....

3. Computer Program Re-layers Engineering Drawings

Science.gov (United States)

Crosby, Dewey C., III

1990-01-01

RULCHK computer program aids in structuring layers of information pertaining to part or assembly designed with software described in article "Software for Drawing Design Details Concurrently" (MFS-28444). Checks and optionally updates structure of layers for part. Enables designer to construct model and annotate its documentation without burden of manually layering part to conform to standards at design time.

4. Children's drawings exhibited in the Globe

CERN Multimedia

Elizabeth Roe

2010-01-01

"Draw Me A Physicist" has been a success. Members of the public visiting the exhibition in the Globe of Science and Innovation have praised the scientific and creative balance the children of neighbouring France and the Canton of Geneva have obtained through their visit to CERN.   The Draw Me a Physicist exhibition in the Globe For a six-month period 9 to 11-year olds from the Pays de Gex, Meyrin, Satigny and Vernier have been able to enjoy a balance between science and art, through drawing and defining their interpretations of a physicist. In May, eight pairs of drawings from each participating class were selected by the schools to be displayed on the second floor of the Globe. Since the images have been put up, the viewers have enjoyed the contrast between the "before" pictures of vibrant Albert Einsteins to the "after" pictures of casual people sitting in an office. The large room in the Globe has been transformed from a hollow shell int...

5. Hupa Numbers.

Science.gov (United States)

Bennett, Ruth, Ed.; And Others

An introduction to the Hupa number system is provided in this workbook, one in a series of numerous materials developed to promote the use of the Hupa language. The book is written in English with Hupa terms used only for the names of numbers. The opening pages present the numbers from 1-10, giving the numeral, the Hupa word, the English word, and…

6. Triangular Numbers

Triangular number, figurate num- ber, rangoli, Brahmagupta–Pell equation, Jacobi triple product identity. Figure 1. The first four triangular numbers. Left: Anuradha S Garge completed her PhD from. Pune University in 2008 under the supervision of Prof. S A Katre. Her research interests include K-theory and number theory.

7. Proth Numbers

Directory of Open Access Journals (Sweden)

Schwarzweller Christoph

2015-02-01

Full Text Available In this article we introduce Proth numbers and prove two theorems on such numbers being prime [3]. We also give revised versions of Pocklington’s theorem and of the Legendre symbol. Finally, we prove Pepin’s theorem and that the fifth Fermat number is not prime.

8. Bounds on the distribution of the number of gaps when circles and lines are covered by fragments: Theory and practical application to genomic and metagenomic projects

Directory of Open Access Journals (Sweden)

Marchesi Julian R

2007-03-01

Full Text Available Abstract Background The question of how a circle or line segment becomes covered when random arcs are marked off has arisen repeatedly in bioinformatics. The number of uncovered gaps is of particular interest. Approximate distributions for the number of gaps have been given in the literature, one motivation being ease of computation. Error bounds for these approximate distributions have not been given. Results We give bounds on the probability distribution of the number of gaps when a circle is covered by fragments of fixed size. The absolute error in the approximation is typically on the order of 0.1% at 10× coverage depth. The method can be applied to coverage problems on the interval, including edge effects, and applications are given to metagenomic libraries and shotgun sequencing.

9. Sagan numbers

OpenAIRE

Mendonça, J. Ricardo G.

2012-01-01

We define a new class of numbers based on the first occurrence of certain patterns of zeros and ones in the expansion of irracional numbers in a given basis and call them Sagan numbers, since they were first mentioned, in a special case, by the North-american astronomer Carl E. Sagan in his science-fiction novel "Contact." Sagan numbers hold connections with a wealth of mathematical ideas. We describe some properties of the newly defined numbers and indicate directions for further amusement.

10. Valuing and Managing Diversity in Business and Industry: Literature Review and Models. Training and Development Research Center Project Number Fifty-Nine.

Science.gov (United States)

Johnson, Sandra J.

An increasingly diverse work force is a definite trend in the United States, and a number of companies have linked valuing and managing diversity to increased productivity. Equal employment opportunity and affirmative action are pointed to as foundational to the development of formal programs for valuing or managing diversity in the workplace. The…

11. Eulerian numbers

CERN Document Server

Petersen, T Kyle

2015-01-01

This text presents the Eulerian numbers in the context of modern enumerative, algebraic, and geometric combinatorics. The book first studies Eulerian numbers from a purely combinatorial point of view, then embarks on a tour of how these numbers arise in the study of hyperplane arrangements, polytopes, and simplicial complexes. Some topics include a thorough discussion of gamma-nonnegativity and real-rootedness for Eulerian polynomials, as well as the weak order and the shard intersection order of the symmetric group. The book also includes a parallel story of Catalan combinatorics, wherein the Eulerian numbers are replaced with Narayana numbers. Again there is a progression from combinatorics to geometry, including discussion of the associahedron and the lattice of noncrossing partitions. The final chapters discuss how both the Eulerian and Narayana numbers have analogues in any finite Coxeter group, with many of the same enumerative and geometric properties. There are four supplemental chapters throughout, ...

12. Children Gifted in Drawing: The Incidence of Precocious Realism

Science.gov (United States)

Drake, Jennifer E.; Winner, Ellen

2013-01-01

Although one study has reported that 6% of children with autism spectrum disorder (ASD) have drawing talent, no study has examined the incidence of drawing talent in typical children. We asked 153 children aged 6-12 years to draw a picture of their hand. We scored the drawings for the use of detail, correct proportion, and overall contour;…

13. Examining Children's Healthcare Experiences through Drawings

Science.gov (United States)

2017-01-01

This study examines children's anxieties about healthcare experiences using drawings. Fifty children, either experiencing a doctor's appointment or hospitalization, completed a drawing of a person in the hospital. Using the Child Drawing: Hospital (CD:H), drawings were scored on individual items which were summed for a total score of projected…

14. Drawing non-layered tidy trees in linear time

NARCIS (Netherlands)

A.J. van der Ploeg (Atze)

2013-01-01

htmlabstractThe well-known Reingold–Tilford algorithm produces tidy-layered drawings of trees: drawings where all nodes at the same depth are vertically aligned. However, when nodes have varying heights, layered drawing may use more vertical space than necessary. A non-layered drawing of a tree

15. 37 CFR 1.74 - Reference to drawings.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Reference to drawings. 1.74... Reference to drawings. When there are drawings, there shall be a brief description of the several views of the drawings and the detailed description of the invention shall refer to the different views by...

16. 48 CFR 552.236-77 - Specifications and Drawings

Science.gov (United States)

2010-10-01

... Drawings 552.236-77 Section 552.236-77 Federal Acquisition Regulations System GENERAL SERVICES....236-77 Specifications and Drawings As prescribed in 536.570-8, insert the following clause: Specifications and Drawings (SEP 1999) The requirements of the clause entitled “Specifications and Drawings for...

17. 18 CFR 4.39 - Specifications for maps and drawings.

Science.gov (United States)

2010-04-01

... and drawings. 4.39 Section 4.39 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY....39 Specifications for maps and drawings. All required maps and drawings must conform to the following specifications, except as otherwise prescribed in this chapter: (a) Each original map or drawing must consist of...

18. 48 CFR 252.227-7033 - Rights in shop drawings.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Rights in shop drawings... of Provisions And Clauses 252.227-7033 Rights in shop drawings. As prescribed in 227.7107-(1)(c), use the following clause: Rights in Shop Drawings (APR 1966) (a) Shop drawings for construction means...

19. 37 CFR 1.83 - Content of drawing.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Content of drawing. 1.83... COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions The Drawings § 1.83 Content of drawing. (a) The drawing in a nonprovisional application must show every feature of the...

20. Monsters of Drawing and Writing Matter

DEFF Research Database (Denmark)

Balle, Søren Hattesen

)phobic Cold War culture and escape from the academic orthodoxies of New Criticism, the latter decreeing the autonomy of poetry and the harmonious integration of form and content in a signifying poetic whole. By experimenting with the interplay between poetry and other artistic genres, their collaborations...... through and around the theme of textual materialization. At the same time as O’Hara and Rivers investigate the often conflicting powers of both genres to incarnate the reality of the material world (especially the human body) in their respective media, they also playfully foreground the materiality...... of artistic/poetic text as so much drawing and writing blending with each other to form new monstrous shapes. This double strategy contributes to a re-inscription of poetry and drawing as sheer physical matter and means of artistic production within that world which they purport to represent in the first...

1. Transfinite Numbers

Transfinite Numbers. What is Infinity? S M Srivastava. In a series of revolutionary articles written during the last quarter of the nineteenth century, the great Ger- man mathematician Georg Cantor removed the age-old mistrust of infinity and created an exceptionally beau- tiful and useful theory of transfinite numbers. This is.

2. THE MAIN CHARACTERISTICS OF LUBRICATION FOR WIRE DRAWING FOR METAL CORD, THEIR INFLUENCE ON DRAWING QUALITY

Directory of Open Access Journals (Sweden)

A. A. Truhanovich

2008-01-01

Full Text Available The physical-chemical characteristics of lubrications for dry wiredrawing are examined. The connection of some parameters with quality of both the drawing process and finished wire is shown.

3. Are Young Children's Drawings Canonically Biased?

Science.gov (United States)

Picard, Delphine; Durand, Karine

2005-01-01

In a between-subjects design, 4-to 6-year-olds were asked to draw from three-dimensional (3D) models, two-and-a-half-dimensional (212D) models with or without depth cues, or two-dimensional (2D) models of a familiar object (a saucepan) in noncanonical orientations (handle at the back or at the front). Results showed that canonical errors were…

4. Evaluation and modelling of the size fractionated aerosol particle number concentration measurements nearby a major road in Helsinki - Part I: Modelling results within the LIPIKA project

Science.gov (United States)

Pohjola, M. A.; Pirjola, L.; Karppinen, A.; Härkönen, J.; Korhonen, H.; Hussein, T.; Ketzel, M.; Kukkonen, J.

2007-08-01

A field measurement campaign was conducted near a major road "Itäväylä" in an urban area in Helsinki in 17-20 February 2003. Aerosol measurements were conducted using a mobile laboratory "Sniffer" at various distances from the road, and at an urban background location. Measurements included particle size distribution in the size range of 7 nm-10 μm (aerodynamic diameter) by the Electrical Low Pressure Impactor (ELPI) and in the size range of 3-50 nm (mobility diameter) by Scanning Mobility Particle Sizer (SMPS), total number concentration of particles larger than 3 nm detected by an ultrafine condensation particle counter (UCPC), temperature, relative humidity, wind speed and direction, driving route of the mobile laboratory, and traffic density on the studied road. In this study, we have compared measured concentration data with the predictions of the road network dispersion model CAR-FMI used in combination with an aerosol process model MONO32. For model comparison purposes, one of the cases was additionally computed using the aerosol process model UHMA, combined with the CAR-FMI model. The vehicular exhaust emissions, and atmospheric dispersion and transformation of fine and ultrafine particles was evaluated within the distance scale of 200 m (corresponding to a time scale of a couple of minutes). We computed the temporal evolution of the number concentrations, size distributions and chemical compositions of various particle size classes. The atmospheric dilution rate of particles is obtained from the roadside dispersion model CAR-FMI. Considering the evolution of total number concentration, dilution was shown to be the most important process. The influence of coagulation and condensation on the number concentrations of particle size modes was found to be negligible on this distance scale. Condensation was found to affect the evolution of particle diameter in the two smallest particle modes. The assumed value of the concentration of condensable organic

5. Evaluation and modelling of the size fractionated aerosol particle number concentration measurements nearby a major road in Helsinki ─ Part I: Modelling results within the LIPIKA project

Directory of Open Access Journals (Sweden)

M. Ketzel

2007-08-01

Full Text Available A field measurement campaign was conducted near a major road "Itäväylä" in an urban area in Helsinki in 17–20 February 2003. Aerosol measurements were conducted using a mobile laboratory "Sniffer" at various distances from the road, and at an urban background location. Measurements included particle size distribution in the size range of 7 nm–10 μm (aerodynamic diameter by the Electrical Low Pressure Impactor (ELPI and in the size range of 3–50 nm (mobility diameter by Scanning Mobility Particle Sizer (SMPS, total number concentration of particles larger than 3 nm detected by an ultrafine condensation particle counter (UCPC, temperature, relative humidity, wind speed and direction, driving route of the mobile laboratory, and traffic density on the studied road. In this study, we have compared measured concentration data with the predictions of the road network dispersion model CAR-FMI used in combination with an aerosol process model MONO32. For model comparison purposes, one of the cases was additionally computed using the aerosol process model UHMA, combined with the CAR-FMI model. The vehicular exhaust emissions, and atmospheric dispersion and transformation of fine and ultrafine particles was evaluated within the distance scale of 200 m (corresponding to a time scale of a couple of minutes. We computed the temporal evolution of the number concentrations, size distributions and chemical compositions of various particle size classes. The atmospheric dilution rate of particles is obtained from the roadside dispersion model CAR-FMI. Considering the evolution of total number concentration, dilution was shown to be the most important process. The influence of coagulation and condensation on the number concentrations of particle size modes was found to be negligible on this distance scale. Condensation was found to affect the evolution of particle diameter in the two smallest particle modes. The assumed value of the concentration of

6. Interim essential and support drawing list for K Basins

International Nuclear Information System (INIS)

Langevin, M.J.

1994-01-01

This document presents a list of essential and support drawings that have been identified as required to achieve the mission objectives of K Basin and are an integral part of the in-progress K Basins system baselining effort. The drawings listed in the appendix are those drawings required to safely operate K Basins. These drawings will be authenticated through the field verification and design reconstitution programs to ensure that these identified drawings are consistent with design requirements

7. An exploratory study of drawings by bereaved children.

Science.gov (United States)

Forrest, M; Thomas, G V

1991-11-01

Bereaved and non-bereaved children made drawings of a person, themselves, their family, and a topic of their choice; the drawings were then analysed to investigate whether the experience of bereavement was expressed in drawing in any reliable way. Bereaved children were no more likely than non-bereaved children to include indicators of emotional disturbance in their human figure drawings. Bereaved children, however, were reliably more likely than non-bereaved children to include themselves in a drawing of their family.

8. Reliability of the wire drawing dies

International Nuclear Information System (INIS)

Sheikh, A.K.; Khany, S.E.

1993-01-01

A wear based model is proposed for the dies used in wire drawing process. Using this wear model, it is possible to predict life of the die corresponding to a wear limit criterion. Since various quantities in the model are random in nature the resulting die life will also be random quantity characterized by an appropriate distribution. Using a probabilistic characterization of the parameters of the predictive model, Monte Carlo simulations were conducted to establish the die life distribution. To asses the sensitivity of life distribution with respect to various contributing variables (parameters), the simulation runs were conducted at different levels of these variables (parameters). It is shown that wire drawing die life is Weibull distributed. To compare the simulated results with actual time to failure, data of dies was obtained from a large wire drawing company and was compared with corresponding scenario generated by Monte Carlo simulation. Results obtained by Monte Carlo simulations were very close to the actual time to failure data. (author)

9. What Does the DAP:IQ Measure?: Drawing Comparisons between Drawing Performance and Developmental Assessments.

Science.gov (United States)

Rehrig, Gwendolyn; Stromswold, Karin

2018-01-01

Human figure drawing tasks such as the Draw-a-Person test have long been used to assess intelligence (F. Goodenough, 1926). The authors investigate the skills tapped by drawing and the risk factors associated with poor drawing. Self-portraits of 345 preschool children were scored by raters trained in using the Draw-a-Person Intellectual Ability test (DAP:IQ) rubric (C. R. Reynolds & J. A. Hickman, 2004). Analyses of children's fine motor, gross motor, social, cognitive, and language skills revealed that only fine motor skill was an independent predictor of DAP:IQ scores. Being a boy and having a low birth weight were associated with lower DAP:IQ scores. These findings suggest that although the DAP:IQ may not be a valid measure of cognitive ability, it may be a useful screening tool for fine motor disturbances in at-risk children, such as boys who were born at low birth weights. Furthermore, researchers who use human figure drawing tasks to measure intelligence should measure fine motor skill in addition to intelligence.

10. Chocolate Numbers

OpenAIRE

Ji, Caleb; Khovanova, Tanya; Park, Robin; Song, Angela

2015-01-01

In this paper, we consider a game played on a rectangular $m \\times n$ gridded chocolate bar. Each move, a player breaks the bar along a grid line. Each move after that consists of taking any piece of chocolate and breaking it again along existing grid lines, until just $mn$ individual squares remain. This paper enumerates the number of ways to break an $m \\times n$ bar, which we call chocolate numbers, and introduces four new sequences related to these numbers. Using various techniques, we p...

11. Number theory

CERN Document Server

Andrews, George E

1994-01-01

Although mathematics majors are usually conversant with number theory by the time they have completed a course in abstract algebra, other undergraduates, especially those in education and the liberal arts, often need a more basic introduction to the topic.In this book the author solves the problem of maintaining the interest of students at both levels by offering a combinatorial approach to elementary number theory. In studying number theory from such a perspective, mathematics majors are spared repetition and provided with new insights, while other students benefit from the consequent simpl

12. NASA/DOD Aerospace Knowledge Diffusion Research Project. Report number 21: US aerospace industry librarians and technical information specialists as information intermediaries: Results of the phase 2 survey

Science.gov (United States)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DoD Aerospace Knowledge Diffusion Research Project. In this report, we summarize the literature on technical reports and provide a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report. We present results from our investigation of aerospace knowledge diffusion vis-a-vis the U.S. government technical report, and present the results of research that investigated aerospace knowledge diffusion vis-a-vis U.S. aerospace industry librarians and technical information specialists as information intermediaries.

13. When family drawings reveal vulnerabilities and resilience.

Science.gov (United States)

Ireland, Rachel; Weisbart, Cindy; Dubowitz, Howard; Rowe, Jeffrey; Stein, Martin T

2010-04-01

Sonia's mother was concerned about her 9-year old daughter's aggression, defiant behavior, and distractibility. When she was 4-years, she kicked her bother and he lost a tooth as a result of the trauma. At this time, her pediatrician was concerned about hyperactivity, impulsivity, and defiance of authority and recommended a psychological evaluation. Sonia's father refused an evaluation and responded by physically abusing his wife while demanding a transfer to a new physician. Sonia's mother left her husband at this time and moved away with Sonia. Spousal abuse occurred frequently before the separation, and Sonia may have been physically abused as well. Currently, Sonia is in third grade where she is underperforming in many areas. She enjoys drawing and reading, but struggles to sit quietly and stay on task. Her teacher reports frequent vocal and physical disruptions. Homework takes an inordinate amount of time to complete. She does not have a sustained friendship; her mother feels that this is because other kids do not like being bossed by Sonia. Her mother is concerned about Sonia's behavior especially the unremorseful disruptive behavior toward her younger brother and grandmother. Sonia was born after an uneventful full-term pregnancy without evidence of maternal smoking, drugs, alcohol, or medications. Motor and social developmental milestones were achieved at the appropriate time. Language milestones were achieved early; her mother recalls that Sonia learned to read at the age of 3 years. Sonia's medical history is significant for obesity, seasonal allergic rhinitis, and delayed sleep onset with prolonged awakenings associated with nightmares. Her mother reports that Sonia "worries about everything," including thoughts that her brother will turn into a monster. When an argument occurs at home, she "gets scared," bites her nails, and cries. Sonia currently lives with her mother, 2 younger brothers, step-father, and grandparents. Family history is significant for

14. Experience of childhood abuse and later number of remaining teeth in older Japanese: a life-course study from Japan Gerontological Evaluation Study project.

Science.gov (United States)

Matsuyama, Yusuke; Fujiwara, Takeo; Aida, Jun; Watt, Richard G; Kondo, Naoki; Yamamoto, Tatsuo; Kondo, Katsunori; Osaka, Ken

2016-12-01

From a life-course perspective, adverse childhood experiences (ACEs) such as childhood abuse are known risk factors for adult diseases and death throughout life. ACEs could also cause poor dental health in later life because they could induce poor dental health in childhood, initiate unhealthy behaviors, and lower immune and physiological functions. However, it is not known whether ACEs have a longitudinal adverse effect on dental health in older age. This study aimed to investigate the association between experience of childhood abuse until the age of 18 and current number of remaining teeth among a sample of older Japanese adults. A retrospective cohort study was conducted using the data from the Japan Gerontological Evaluation Study (JAGES), a large-scale, self-reported survey in 2013 including 27 525 community-dwelling Japanese aged ≥65 years (response rate=71.1%). The outcome, current number of remaining teeth was used categorically: ≥20, 10-19, 5-9, 1-4, and no teeth. Childhood abuse was defined as having any experience of physical abuse, psychological abuse, and psychological neglect up until the age of 18 years. Ordered logistic regression models were applied. Of the 25 189 respondents who indicated their number of remaining teeth (mean age: 73.9; male: 46.5%), 14.8% had experience of childhood abuse. Distributions of ≥20, 10-19, 5-9, 1-4, and no teeth were as follows: 46.6%, 22.0%, 11.4%, 8.2%, and 11.8% among respondents with childhood abuse, while 52.3%, 21.3%, 10.3%, 6.6%, and 9.5% among respondents without childhood abuse. Childhood abuse was significantly associated with fewer remaining teeth after adjusting for covariates including socioeconomic status (odds ratio=1.14; 95% confidence interval: 1.06, 1.22). Childhood abuse could have a longitudinal adverse effect on later dental health in older age. This study emphasizes the importance of early life experiences on dental health throughout later life. © 2016 John Wiley & Sons A/S. Published by

15. Private Water Projects

OpenAIRE

2005-01-01

Drawing on the World Bank's Private Participation in Infrastructure Project Database, this Note reviews developments in the water and sewerage sector of developing countries in 2004 and changes in private participation in the sector since 2001. Data for 2004 show that total investment in water and sewerage projects with private participation amounted to nearly US\$2 billion. Recent private ...

16. Nice numbers

CERN Document Server

Barnes, John

2016-01-01

In this intriguing book, John Barnes takes us on a journey through aspects of numbers much as he took us on a geometrical journey in Gems of Geometry. Similarly originating from a series of lectures for adult students at Reading and Oxford University, this book touches a variety of amusing and fascinating topics regarding numbers and their uses both ancient and modern. The author intrigues and challenges his audience with both fundamental number topics such as prime numbers and cryptography, and themes of daily needs and pleasures such as counting one's assets, keeping track of time, and enjoying music. Puzzles and exercises at the end of each lecture offer additional inspiration, and numerous illustrations accompany the reader. Furthermore, a number of appendices provides in-depth insights into diverse topics such as Pascal’s triangle, the Rubik cube, Mersenne’s curious keyboards, and many others. A theme running through is the thought of what is our favourite number. Written in an engaging and witty sty...

17. A Developmental Perspective in Learning the Mirror-Drawing Task

Directory of Open Access Journals (Sweden)

Mona Sharon Julius

2016-03-01

18. Children's Perceptions and Learning about Tropical Rainforests: An Analysis of Their Drawings

Science.gov (United States)

Bowker, Rob

2007-01-01

This study analysed 9 to 11 year old children's drawings of tropical rainforests immediately before and after a visit to the Humid Tropics Biome at the Eden Project, Cornwall, UK. A theoretical framework derived from considerations of informal learning and constructivism was used as a basis to develop a methodology to interpret the children's…

19. Radiation requirements for uranium project approvals

International Nuclear Information System (INIS)

Hondros, J.

2014-01-01

Uranium mining projects in Australia must receive approval under both state and national laws based on a wide ranging impact assessment of the project. The process may take a number of years and involves multiple levels and parts of government and public consultation and scrutiny. The impact assessment is broad and usually covers; environmental, social, health, public safety and economic aspects. Information provided in the approvals documentation needs to be presented in a credible and understandable manner for all audiences. This means making complex information simpler, while making sure that it maintains its technical integrity. Poorly communicated information, which is overly complex, overly simplified or incomplete, can result in significant delays to the project approval which can potentially impact on project timelines. For uranium projects, along with other projects involving radioactive materials, such as minerals sands and rare earths, radiation and its impacts usually draw a disproportionate amount of both government and public scrutiny compared to other potential impacts and risks. It is therefore of key importance that radiation assessments are properly performed and results clearly presented and communicated with sufficient detail for stakeholders to make informed decisions. It is also important to ensure that the radiation risk is presented in perspective with other risks of the project. This presentation outlines a structure for a radiation impact assessment based on experience from a number of projects in Australia. The structure aims to be clear and simple and ensure the right balance between scientific fact, digestible information and demonstrable competence. (author)

20. GRAPHICAL MODELLING OF THE OBJECTS – A BASIC ELEMENT IN TEACHING TECHNICAL DRAWING

Directory of Open Access Journals (Sweden)

CLINCIU Ramona

2015-06-01

Full Text Available The paper presents applications developed using AutoCAD and 3D Studio MAX programs. The purpose of the applications is represented by the development of the spatial abilities of the students and they have frequent use in teaching technical drawing, for the understanding of the representation of the orthogonal projections of the parts, as well as for the construction of their axonometric projection.

1. Funny Numbers

Directory of Open Access Journals (Sweden)

Theodore M. Porter

2012-12-01

Full Text Available The struggle over cure rate measures in nineteenth-century asylums provides an exemplary instance of how, when used for official assessments of institutions, these numbers become sites of contestation. The evasion of goals and corruption of measures tends to make these numbers “funny” in the sense of becoming dis-honest, while the mismatch between boring, technical appearances and cunning backstage manipulations supplies dark humor. The dangers are evident in recent efforts to decentralize the functions of governments and corporations using incen-tives based on quantified targets.

2. Transcendental numbers

CERN Document Server

Murty, M Ram

2014-01-01

This book provides an introduction to the topic of transcendental numbers for upper-level undergraduate and graduate students. The text is constructed to support a full course on the subject, including descriptions of both relevant theorems and their applications. While the first part of the book focuses on introducing key concepts, the second part presents more complex material, including applications of Baker’s theorem, Schanuel’s conjecture, and Schneider’s theorem. These later chapters may be of interest to researchers interested in examining the relationship between transcendence and L-functions. Readers of this text should possess basic knowledge of complex analysis and elementary algebraic number theory.

3. Girls in detail, boys in shape: gender differences when drawing cubes in depth.

Science.gov (United States)

Lange-Küttner, C; Ebersbach, M

2013-08-01

The current study tested gender differences in the developmental transition from drawing cubes in two- versus three dimensions (3D), and investigated the underlying spatial abilities. Six- to nine-year-old children (N = 97) drew two occluding model cubes and solved several other spatial tasks. Girls more often unfolded the various sides of the cubes into a layout, also called diagrammatic cube drawing (object design detail). In girls, the best predictor for drawing the cubes was Mental Rotation Test (MRT) accuracy. In contrast, boys were more likely to preserve the optical appearance of the cube array. Their drawing in 3D was best predicted by MRT reaction time and the Embedded Figures Test (EFT). This confirmed boys' stronger focus on the contours of an object silhouette (object shape). It is discussed whether the two gender-specific approaches to drawing in three dimensions reflect two sides of the appearance-reality distinction in drawing, that is graphic syntax of object design features versus visual perception of projective space. © 2012 The British Psychological Society.

4. The Neural Basis of Mark Making: A Functional MRI Study of Drawing

Science.gov (United States)

Yuan, Ye; Brown, Steven

2014-01-01

Compared to most other forms of visually-guided motor activity, drawing is unique in that it “leaves a trail behind” in the form of the emanating image. We took advantage of an MRI-compatible drawing tablet in order to examine both the motor production and perceptual emanation of images. Subjects participated in a series of mark making tasks in which they were cued to draw geometric patterns on the tablet's surface. The critical comparison was between when visual feedback was displayed (image generation) versus when it was not (no image generation). This contrast revealed an occipito-parietal stream involved in motion-based perception of the emerging image, including areas V5/MT+, LO, V3A, and the posterior part of the intraparietal sulcus. Interestingly, when subjects passively viewed animations of visual patterns emerging on the projected surface, all of the sensorimotor network involved in drawing was strongly activated, with the exception of the primary motor cortex. These results argue that the origin of the human capacity to draw and write involves not only motor skills for tool use but also motor-sensory links between drawing movements and the visual images that emanate from them in real time. PMID:25271440

5. The neural basis of mark making: a functional MRI study of drawing.

Directory of Open Access Journals (Sweden)

Ye Yuan

Full Text Available Compared to most other forms of visually-guided motor activity, drawing is unique in that it "leaves a trail behind" in the form of the emanating image. We took advantage of an MRI-compatible drawing tablet in order to examine both the motor production and perceptual emanation of images. Subjects participated in a series of mark making tasks in which they were cued to draw geometric patterns on the tablet's surface. The critical comparison was between when visual feedback was displayed (image generation versus when it was not (no image generation. This contrast revealed an occipito-parietal stream involved in motion-based perception of the emerging image, including areas V5/MT+, LO, V3A, and the posterior part of the intraparietal sulcus. Interestingly, when subjects passively viewed animations of visual patterns emerging on the projected surface, all of the sensorimotor network involved in drawing was strongly activated, with the exception of the primary motor cortex. These results argue that the origin of the human capacity to draw and write involves not only motor skills for tool use but also motor-sensory links between drawing movements and the visual images that emanate from them in real time.

6. Robust and accurate vectorization of line drawings.

Science.gov (United States)

Hilaire, Xavier; Tombre, Karl

2006-06-01

This paper presents a method for vectorizing the graphical parts of paper-based line drawings. The method consists of separating the input binary image into layers of homogeneous thickness, skeletonizing each layer, segmenting the skeleton by a method based on random sampling, and simplifying the result. The segmentation method is robust with a best bound of 50 percent noise reached for indefinitely long primitives. Accurate estimation of the recognized vector's parameters is enabled by explicitly computing their feasibility domains. Theoretical performance analysis and expression of the complexity of the segmentation method are derived. Experimental results and comparisons with other vectorization systems are also provided.

7. A generalization of algebraic surface drawing

Science.gov (United States)

Blinn, J. F.

1982-01-01

An implicit surface mathematical description of three-dimensional space is defined in terms of all points which satisfy some equation F(x, y, z) equals 0. This form is ideal for space-shaded picture drawing, where the coordinates are substituted for x and y and the equation is solved for z. A new algorithm is presented which is applicable to functional forms other than those of first- and second-order polynomial functions, such as the summation of several Gaussian density distributions. The algorithm was created in order to model electron density maps of molecular structures, but is shown to be capable of generating shapes of esthetic interest.

8. David Ferrier: brain drawings and brain maps.

Science.gov (United States)

Lazar, J Wayne

2013-01-01

This chapter has two emphases, one is about the men who influenced the visual representations that David Ferrier (1843-1928) used to illustrate his work on localization of brain functions during the years 1873-1875, namely, Alexander Ecker, John C. Galton, and Ernest Waterlow, and the other is about the nature of medical representations and of Ferrier's illustrations in particular. Medical illustrations are characterized either as pictures, line drawings, or brain maps. Ferrier's illustrations will be shown to be increasingly sophisticated brain maps that contrast with early nineteenth-century standards of medical illustrations, as exemplified by John Bell (1763-1829). © 2013 Elsevier B.V. All rights reserved.

9. 10 years with Planet Earth essence in the primary school children drawings

Science.gov (United States)

2016-04-01

"10 years with Planet Earth" is the title of the 2016 INGV calendar for primary schools representing the review of a project conceived as support and complement of 15 years long INGV dissemination activities with schools. We realized 10 calendars together with and for primary schools, every year with a subject related to a World in constant evolution. Earthquakes, volcanic eruptions, tsunami waves, magnetic storms and other phenomena are manifestations of the complexity and dynamicity, which began more than four billion years ago and never halted. Since the Earth originated to the first presence of water, life and oxygen, the Cambrian explosion of species, the domain of dinosaurs, the great extinctions and glaciations, the surface of our planet experiences continents collisions, mountains and oceans formation and life forms emerging and disappearing. Every year we have launched a competition asking children to send drawings on themes chosen to stimulate learning about Earth Sciences and Planet Earth dynamics. We intended to raise awareness on issues as water resources availability, protection against natural disasters and control of environmental degradation. For each competition, we chose the most significant drawings to be included in the yearly calendar about the Earth. The authors of drawings were awarded by scientists, journalists, artists and science communicators and even by a minister. Besides the competitions, these drawings depict their own impressions and reflections, providing an opportunity to illustrate the children's point of view. From drawings and texts arise a great consideration and respect for the Planet, raising hopes that similar initiatives can contribute to increase the knowledge of the Earth and of the fragile human ecosystem in the hearts and minds of future active citizens. The project was made possible thanks to the teachers and to the wonderful students of more than 200 schools that sent about 10,000 drawings that have intrigued

10. Transfinite Numbers

this is a characteristic difference between finite and infinite sets and created an immensely useful branch of mathematics based on this idea which had a great impact on the whole of mathe- matics. For example, the question of what is a number (finite or infinite) is almost a philosophical one. However Cantor's work turned it ...

11. Influence of isovector pairing and particle-number projection effects on spectroscopic factors for one-pair like-particle transfer reactions in proton-rich even-even nuclei

Science.gov (United States)

Benbouzid, Y.; Allal, N. H.; Fellah, M.; Oudih, M. R.

2018-04-01

Isovector neutron-proton (np) pairing and particle-number fluctuation effects on the spectroscopic factors (SF) corresponding to one-pair like-particle transfer reactions in proton-rich even-even nuclei are studied. With this aim, expressions of the SF corresponding to two-neutron stripping and two-proton pick-up reactions, which take into account the isovector np pairing effect, are established within the generalized BCS approach, using a schematic definition proposed by Chasman. Expressions of the same SF which strictly conserve the particle number are also established within the Sharp-BCS (SBCS) discrete projection method. In both cases, it is shown that these expressions generalize those obtained when only the pairing between like particles is considered. First, the formalism is tested within the Richardson schematic model. Second, it is applied to study even-even proton-rich nuclei using the single-particle energies of a Woods-Saxon mean-field. In both cases, it is shown that the np pairing effect and the particle-number projection effect on the SF values are important, particularly in N = Z nuclei, and must then be taken into account.

12. Listen to them draw: screening children in primary care through the use of human figure drawings.

Science.gov (United States)

Tielsch, Anna H; Allen, Patricia Jackson

2005-01-01

This literature review focuses on the Human Figure Drawing (HFD) methods put forth by Elizabeth Koppitz as a screening instrument. Children's drawings have potential as a mental health screening aide for health care practitioners in the primary care setting. This paper focuses on self-portrait drawings as a screening technique for emotional well-being, anxiety, and depression in school-aged children (6-12 years old). Using Koppitz's emotional indicators checklist for mental health, practitioners can use the child's HFD as a quick screening tool. Although the HFD is not diagnostic and can not be used as the sole indicator for anxiety or depression, two or more emotional indicators may signal to the clinician that further psychiatric assessment and referral is needed.

13. Anatomy drawing screencasts: enabling flexible learning for medical students.

Science.gov (United States)

Pickering, James D

2015-01-01

The traditional lecture remains an essential method of disseminating information to medical students. However, due to the constant development of the modern medical curriculum many institutions are embracing novel means for delivering the core anatomy syllabus. Using mobile media devices is one such way, enabling students to access core material at a time and place that suits their specific learning style. This study has examined the effect of five anatomy drawing screencasts that replicate the popular anatomy drawing element of a lecture. These resources were uploaded to the University's Virtual Learning Environment for student access. Usage data and an end of module questionnaire were used to assess the impact of the screencasts on student education. The data revealed a high level of usage that varied in both the time of day and day of the week, with the number of downloads dramatically increasing towards the end of the module when the assessment was approaching. The student group found the additional resources extremely useful in consolidating information and revision, with many commenting on their preference to the screencasts compared to the more traditional approaches to learning. Scrutinizing the screencasts in relation to cognitive load theory and the cognitive theory of multimedia learning indicates a high correlation with an evidence-based approach to designing learning resources. Overall the screencasts have been a well-received enhancement that supports the student learning and has been shown to promote flexible learning. © 2014 American Association of Anatomists.

14. Platform-independent method for computer aided schematic drawings

Science.gov (United States)

Vell, Jeffrey L [Slingerlands, NY; Siganporia, Darius M [Clifton Park, NY; Levy, Arthur J [Fort Lauderdale, FL

2012-02-14

A CAD/CAM method is disclosed for a computer system to capture and interchange schematic drawing and associated design information. The schematic drawing and design information are stored in an extensible, platform-independent format.

15. How children use drawing to regulate their emotions.

Science.gov (United States)

Drake, Jennifer E; Winner, Ellen

2013-01-01

We examined two ways in which drawing may function to elevate mood in children-venting (expressing negative feelings) and distraction (expressing something unrelated to the negative feelings). We examined the effectiveness of drawing as an emotion regulator when drawing is used to vent versus distract (Study 1) and tested whether the effects found are specific to the activity of creating one's own drawing or generalisable to a drawing activity in which children had to copy another's drawing (Study 2). To induce a negative mood, we asked children to think of a disappointing event. Mood was assessed before and after the assigned activity. In both studies, mood improved significantly more in the distract than in the vent or copy condition. Study 1 demonstrates that drawing improves mood in children via distraction and not via venting. Study 2 demonstrates that this effect is specific to a drawing task in which an image is freely constructed. When a copying task is used, the effect disappears.

16. Photographic and drafting techniques simplify method of producing engineering drawings

Science.gov (United States)

Provisor, H.

1968-01-01

Combination of photographic and drafting techniques has been developed to simplify the preparation of three dimensional and dimetric engineering drawings. Conventional photographs can be converted to line drawings by making copy negatives on high contrast film.

17. Analysis of engineering drawings and raster map images

CERN Document Server

Henderson, Thomas C

2013-01-01

Presents up-to-date methods and algorithms for the automated analysis of engineering drawings and digital cartographic maps Discusses automatic engineering drawing and map analysis techniques Covers detailed accounts of the use of unsupervised segmentation algorithms to map images

18. 7 CFR 97.9 - Drawings and photographs.

Science.gov (United States)

2010-01-01

...) Drawings or photographs shall be in color when color is a distinguishing characteristic of the variety, and the color shall be described by use of Nickerson's or other recognized color chart. (c) Drawings...

19. Local councillors in comparative perspective: drawing conclusions

NARCIS (Netherlands)

Egner, Björn; Sweeting, David; Klok, Pieter J.; Egner, Björn; Sweeting, David; Klok, Pieter-Jan

2013-01-01

The chapters of this book contain the first results of our common research project. They show a rich picture of many aspects of local councillors in 16 countries. It is not the intention of the group that this is the final output from the project. On the contrary: these analyses should be only a

20. Students' annotated drawings of Sun, Moon and Earth mediating teachers' professional development

DEFF Research Database (Denmark)

Nielsen, Birgitte Lund

A case study of a teacher examining her 4th graders’ conceptual understanding of factors causing day and night, seasons, and the phases of the Moon is presented. The teaching example and the data-collection are sourced from the Danish continuous professional development (CPD) project QUEST......-making model. The pre-teaching annotated drawings reveal several alternative conceptions, but based on the post-teaching drawings the teaching must be seen as rather efficient in most areas concerning challenging students’ alternative conceptions; however not in relation to the phases of the Moon. The teacher...

1. BLANK SHAPE OPTIMIZATION ON DEEP DRAWING OF A TWIN ELLIPTICAL CUP USING THE REDUCED BASIS TECHNIQUE METHOD

Directory of Open Access Journals (Sweden)

2015-08-01

Full Text Available In this project thesis, initial blank shape optimization of a twin elliptical cup to reduce earring phenomenon in anisotropic sheet deep drawing process was studied .The purpose of this study is optimization of initial blank for reduction of the ears height value. The optimization process carried out using finite element method approach, which is coupled with Taguchi design of experiments and reduced basis technique methods. The deep drawing process was simulated in FEM software ABAQUS 6.12. The results of optimization show earring height and, in addition, a number of design variables and time of process can be reduced by using this methods. After optimization process with the proposed method, the maximum reduction of the earring height would be from 21.08 mm to 0.07 mm and also it could be reduced to 0 in some of the directions. The proposed optimization design in this article allows the designers to select the practical basis shapes. This leads to obtain better results at the end of the optimization process, to reduce design variables, and also to prevent repeating the optimization steps for indirect shapes.

2. Assembly for the deformation by drawing in cryogenic conditions

International Nuclear Information System (INIS)

Volchok, O.I.; Dmitrenko, L.I.; Yaes, N.A.

2003-01-01

Design of the assembly for the drawing in liquid nitrogen is described. Such a design ensures the tensor recording of drawing force, the wire arrangement on the drawing force dram, the drawing realization with the linear ultrasonic (f approx 20 kHz) mechanical vibrations superposition. The comparative data of some material samples physical-mechanical properties are presented. The presented data demonstrate the low temperature deformation efficiency

3. Using Drawing in Designing Educational Software with Children

DEFF Research Database (Denmark)

Andersen, Kristine

2002-01-01

Experience with children's drawings in design inquiry shows that drawing can be a way for the child to express his or her needs and wishes to a specific design and navigation. I suggest to focus on children's drawings as a means of expression about learning. My design experience show that drawings...... can serve as objects for dialogues with children when evaluating and designing digital educational material....

4. Factors that determine development of the ability to draw

Directory of Open Access Journals (Sweden)

Jorge Luis Dahik Cabrera

2016-03-01

Full Text Available In this investigation, the necessary factors are determined to structure a drawing representing an object, a brief description of the functions of the cerebral hemispheres, the theory of multiple bits of intelligence Gardner, capacities of representation and perception involved in the skill is reviewed and ability to draw. This work aims to be the beginning of a larger study, where they plan to measure the ability to draw in students, in order to experiment with alternative methodologies for teaching drawing.

5. A graph rewriting programming language for graph drawing

OpenAIRE

Rodgers, Peter

1998-01-01

This paper describes Grrr, a prototype visual graph drawing tool. Previously there were no visual languages for programming graph drawing algorithms despite the inherently visual nature of the process. The languages which gave a diagrammatic view of graphs were not computationally complete and so could not be used to implement complex graph drawing algorithms. Hence current graph drawing tools are all text based. Recent developments in graph rewriting systems have produced computationally com...

6. An exploratory study of the potential learning benefits for medical students in collaborative drawing: creativity, reflection and ‘critical looking’

Science.gov (United States)

2013-01-01

Background Building on a series of higher educational arts/medicine initiatives, an interdisciplinary drawing module themed on the human body was developed for both year 3 Craft students and year 3 Medicine degree students. This became the subject of a research project exploring how the collaborative approach to drawing adopted on this module impacted on the students’ learning. In this article, emphasis is given to issues thought to have most potential relevance to medical education. Methods Using an ethnographic research design, the methods adopted were: direct observation of all aspects of the module sessions, audio and video recordings and photographs of the sessions, the incorporation of a semi-structured discussion at the end of each session, and anonymous student questionnaires. Results A number of key themes emerged. The complex, phased and multi-sensory nature of the ‘critical looking’ skills developed through the drawing exercises was seen as of potential value in medical education, being proposed as analogous to processes involved in clinical examination and diagnosis. The experience of interdisciplinary collaborative drawing was significant to the students as a creative, participatory and responsive form of learning. The emphasis on the physical experience of drawing and the thematic use of the human body as drawing subject led to reflective discussions about bodily knowledge and understanding. There were indications that students had a meta-cognitive awareness of the learning shifts that had occurred and the sessions provoked constructive self-reflective explorations of pre-professional identity. Conclusions This preliminary study suggests, through the themes identified, that there may be potential learning outcomes for medical students in this model of interdisciplinary collaborative drawing of the human body. Further research is needed to explore their applicability and value to medical education. There is a need to explore in more depth the

7. Children's Family Drawings: A Study of Attachment, Personality, and Adjustment

Science.gov (United States)

Goldner, Limor; Scharf, Miri

2011-01-01

This study examined the relationship between children's attachment security, as manifested in their family drawings, and their personality and adjustment. Family drawings were collected from 222 Israeli children, as well as data regarding their personality and adjustment. Each drawing was coded and classified into 1 of 4 attachment categories…

8. Children's Graphical Representations and Emergent Writing: Evidence from Children's Drawings

Science.gov (United States)

Wu, Li-Yuan

2009-01-01

Previous research on children's drawing and writing focused on children's drawing and symbolization with syllabic languages, providing little information regarding young children's symbolization in drawing with a logo language. This study investigated children's emergent writing by examining qualitatively how children's writing takes place as…

9. Brief Report: Human Figure Drawings by Children with Asperger's Syndrome

Science.gov (United States)

Lim, Hui Keow; Slaughter, Virginia

2008-01-01

Twenty-nine children with Asperger's syndrome and 28 typically developing children, matched on gender, chronological age and nonverbal IQ, were asked to produce a free drawing, then requested to draw a person, a house and a tree. The drawings were scored using standardized procedures for assessing accuracy, detail and complexity. There were no…

10. Drawing with Children: An Experiment in Assisted Creativity

Science.gov (United States)

Kouvou, Ourania

2016-01-01

This report outlines the cognitive accomplishments of young children involved in graphic dialogue with adults. A token of collaborative drawing is examined exhibiting the degree to which adult informed tutoring enabled children in their drawing development, enhanced their motivation and ability in narration and resulted in drawings meaningful to…

11. Waste Receiving and Processing Facility (WRAP) Drawing List

International Nuclear Information System (INIS)

WEIDERT, J.R.

1999-01-01

This supporting document delineates the process of identification, categorization, and/or classification of the WRAP facility drawings used to support facility operations and maintenance. This document provides a listing of those essential or safety related drawings which have been identified to date. All other WRAP facility drawings have been classified as general

12. 10 CFR 72.150 - Instructions, procedures, and drawings.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Instructions, procedures, and drawings. 72.150 Section 72... WASTE Quality Assurance § 72.150 Instructions, procedures, and drawings. The licensee, applicant for a... documented instructions, procedures, or drawings of a type appropriate to the circumstances and shall require...

13. 7 CFR 1755.510 - Construction and assembly unit drawings.

Science.gov (United States)

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Construction and assembly unit drawings. 1755.510..., AND STANDARD CONTRACT FORMS § 1755.510 Construction and assembly unit drawings. (a) The construction and assembly unit drawings in this section shall be used by borrowers to assist the installer in...

14. 37 CFR 1.85 - Corrections to drawings.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Corrections to drawings. 1.85... COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions The Drawings § 1.85 Corrections to drawings. (a) A utility or plant application will not be placed on the files for examination...

15. 37 CFR 1.81 - Drawings required in patent application.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Drawings required in patent..., DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions The Drawings § 1.81 Drawings required in patent application. (a) The applicant for a patent is required to furnish...

16. 10 CFR 71.111 - Instructions, procedures, and drawings.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Instructions, procedures, and drawings. 71.111 Section 71... MATERIAL Quality Assurance § 71.111 Instructions, procedures, and drawings. The licensee, certificate..., procedures, or drawings of a type appropriate to the circumstances and shall require that these instructions...

17. 48 CFR 536.570-8 - Specifications and drawings.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Specifications and drawings. 536.570-8 Section 536.570-8 Federal Acquisition Regulations System GENERAL SERVICES... 536.570-8 Specifications and drawings. Insert the clause at 552.236-77, Specifications and Drawings...

18. 33 CFR 117.9 - Delaying opening of a draw.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Delaying opening of a draw. 117.9... DRAWBRIDGE OPERATION REGULATIONS General Requirements § 117.9 Delaying opening of a draw. No person shall unreasonably delay the opening of a draw after the signals required by § 117.15 have been given. Note: Trains...

19. Two Methods for Antialiased Wireframe Drawing with Hidden Line Removal

DEFF Research Database (Denmark)

Bærentzen, Jakob Andreas; Munk-Lund, Steen; Gjøl, Mikkel

2008-01-01

Two novel and robust techniques for wireframe drawing are proposed. Neither suffer from the well-known artifacts associated with the standard two pass, offset based techniques for wireframe drawing. Both methods draw prefiltered lines and produce high-quality antialiased results without super...

20. 40 CFR 35.3160 - Cash draw rules.

Science.gov (United States)

2010-07-01

... refinancing or purchase of the local debt. Cash draws for incurred building costs will generally be treated as refinanced costs. (2) The State may immediately draw cash for up to five percent of each fiscal year's... actual construction cost. In the latter case, the amount of the cash draw would be the actual...

1. 7 CFR 61.34 - Drawing and preparation of sample.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Drawing and preparation of sample. 61.34 Section 61.34 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Cottonseed Samplers § 61.34 Drawing and preparation of sample. Each licensed cottonseed sampler shall draw...

2. 40 CFR 280.112 - Drawing on financial assurance mechanisms.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Drawing on financial assurance... OF UNDERGROUND STORAGE TANKS (UST) Financial Responsibility § 280.112 Drawing on financial assurance... agency may draw on a standby trust fund when: (1) The Director makes a final determination that a release...

3. Communicating and Thinking through Drawing Activity in Early Childhood

Science.gov (United States)

Papandreou, Maria

2014-01-01

This article considers drawing as a meaning-making activity that takes place in certain sociocultural contexts to find evidence for its communicative potentials as well as the relationship between thought and drawing in early childhood. The researcher challenges traditional views about young children's drawing that focus on the result of the…

4. Drawing on Student Knowledge of Neuroanatomy and Neurophysiology

Science.gov (United States)

Slominski, Tara N.; Momsen, Jennifer L.; Montplaisir, Lisa M.

2017-01-01

Drawings are an underutilized assessment format in Human Anatomy and Physiology (HA&P), despite their potential to reveal student content understanding and alternative conceptions. This study used student-generated drawings to explore student knowledge in a HA&P course. The drawing tasks in this study focused on chemical synapses between…

5. Metaphors and Drawings as Research Tools of Head Teachers' Perceptions on Their Management and Leadership Roles and Responsibilities

Science.gov (United States)

Argyropoulou, Eleftheria; Hatira, Kalliopi

2014-01-01

This article introduces an alternative qualitative research tool: metaphor and drawing, as projections of personality features, to explore underlying concepts and values, thoughts and beliefs, fears and hesitations, aspirations and ambitions of the research subjects. These two projective tools are used to explore Greek state kindergarten head…

6. Developing Scientific Reasoning Through Drawing Cross-Sections

Science.gov (United States)

Hannula, K. A.

2012-12-01

Cross-sections and 3D models of subsurface geology are typically based on incomplete information (whether surface geologic mapping, well logs, or geophysical data). Creating and evaluating those models requires spatial and quantitative thinking skills (including penetrative thinking, understanding of horizontality, mental rotation and animation, and scaling). However, evaluating the reasonableness of a cross-section or 3D structural model also requires consideration of multiple possible geometries and geologic histories. Teaching students to create good models requires application of the scientific methods of the geosciences (such as evaluation of multiple hypotheses and combining evidence from multiple techniques). Teaching these critical thinking skills, especially combined with teaching spatial thinking skills, is challenging. My Structural Geology and Advanced Structural Geology courses have taken two different approaches to developing both the abilities to visualize and to test multiple models. In the final project in Structural Geology (a 3rd year course with a pre-requisite sophomore mapping course), students create a viable cross-section across part of the Wyoming thrust belt by hand, based on a published 1:62,500 geologic map. The cross-section must meet a number of geometric criteria (such as the template constraint), but is not required to balance. Each student tries many potential geometries while trying to find a viable solution. In most cases, the students don't visualize the implications of the geometries that they try, but have to draw them and then erase their work if it does not meet the criteria for validity. The Advanced Structural Geology course used Midland Valley's Move suite to test the cross-sections that they made in Structural Geology, mostly using the flexural slip unfolding algorithm and testing whether the resulting line lengths balanced. In both exercises, students seemed more confident in the quality of their cross-sections when the

7. An efficient algorithm for planar drawing of RNA structures with pseudoknots of any type.

Science.gov (United States)

Byun, Yanga; Han, Kyungsook

2016-06-01

An RNA pseudoknot is a tertiary structural element in which bases of a loop pair with complementary bases are outside the loop. A drawing of RNA secondary structures is a tree, but a drawing of RNA pseudoknots is a graph that has an inner cycle within a pseudoknot and possibly outer cycles formed between the pseudoknot and other structural elements. Visualizing a large-scale RNA structure with pseudoknots as a planar drawing is challenging because a planar drawing of an RNA structure requires both pseudoknots and an entire structure enclosing the pseudoknots to be embedded into a plane without overlapping or crossing. This paper presents an efficient heuristic algorithm for visualizing a pseudoknotted RNA structure as a planar drawing. The algorithm consists of several parts for finding crossing stems and page mapping the stems, for the layout of stem-loops and pseudoknots, and for overlap detection between structural elements and resolving it. Unlike previous algorithms, our algorithm generates a planar drawing for a large RNA structure with pseudoknots of any type and provides a bracket view of the structure. It generates a compact and aesthetic structure graph for a large pseudoknotted RNA structure in O([Formula: see text]) time, where n is the number of stems of the RNA structure.

8. Draw It Again Sam: The Effect of Drawing on Children's Suggestibility and Source Monitoring Ability.

Science.gov (United States)

Bruck, Maggie; Melnyk, Laura; Ceci, Stephen J.

2000-01-01

Examined the effects of drawing true and false reminders about a previously experienced magic show on 3- to 6-year-olds' suggestibility and source monitoring ability. Found that children who had drawn the reminders had better recall of reminders and better source memory than children who had only answered questions about them. Both groups reported…

9. Determination of Process Parameters in Multi-Stage Hydro-Mechanical Deep Drawing by FE Simulation

Science.gov (United States)

Kumar, D. Ravi; Manohar, M.

2017-09-01

In this work, analysis has been carried to simulate manufacturing of a near hemispherical bottom part with large depth by hydro-mechanical deep drawing with an aim to reduce the number of forming steps and to reduce the extent of thinning in the dome region. Inconel 718 has been considered as the material due to its importance in aerospace industry. It is a Ni-based super alloy and it is one of the most widely used of all super alloys primarily due to large-scale applications in aircraft engines. Using Finite Element Method (FEM), numerical simulations have been carried out for multi-stage hydro-mechanical deep drawing by using the same draw ratios and design parameters as in the case of conventional deep drawing in four stages. The results showed that the minimum thickness in the final part can be increased significantly when compared to conventional deep drawing. It has been found that the part could be deep drawn to the desired height (after trimming at the final stage) without any severe wrinkling. Blank holding force (BHF) and peak counter pressure have been found to have a strong influence on thinning in the component. Decreasing the coefficient of friction has marginally increased the minimum thickness in the final component. By increasing the draw ratio and optimizing BHF, counter pressure and die corner radius in the simulations, it has been found that it is possible to draw the final part in three stages. It has been found that thinning can be further reduced by decreasing the initial blank size without any reduction in the final height. This reduced the draw ratio at every stage and optimum combination of BHF and counter pressure have been found for the 3-stage process also.

10. Early Understanding of the Concept of Living Things: An Examination of Young Children's Drawings of Plant Life

Science.gov (United States)

Villarroel, José Domingo; Infante, Guillermo

2014-01-01

This paper looks at the drawings of a sample of 118 children aged between 4 and 7 years old on the topic of plant life and relates the content to their knowledge of the concept of living things. The research project uses two types of tests: a task to analyse the level of understanding of the concept of living things and a free drawing activity.…

11. Manual of engineering drawing technical product specification and documentation to British and international standards

CERN Document Server

Simmons, Colin H; Simmons, Colin

2012-01-01

Manual of Engineering Drawing is a comprehensive guide for experts and novices for producing engineering drawings and annotated 3D models that meet the recent BSI and ISO standards of technical product documentation and specifications. This fourth edition of the text has been updated in line with recent standard revisions and amendments. The book has been prepared for international use, and includes a comprehensive discussion of the fundamental differences between the ISO and ASME standards, as well as recent updates regarding legal components, such as copyright, patents, and other legal considerations. The text is applicable to CAD and manual drawing, and it covers the recent developments in 3D annotation and surface texture specifications. Its scope also covers the concepts of pictorial and orthographic projections, geometrical, dimensional and surface tolerancing, and the principle of duality. The text also presents numerous examples of hydraulic and electrical diagrams, applications, bearings, adhesives, ...

12. Children’s drawing activities and narratives from their everyday lives

DEFF Research Database (Denmark)

Nielsen, Anne Maj

. In the drawing activity and situation in the specific context various events and material tools and artefacts may appeal to the drawing child in ways that affect the drawing. This is important to take into consideration in research. The presentation includes examples from two research projects that aimed......In the Scandinavian countries it has become common to make children’s perspectives on their own lives in family and child care part of research in these areas. This raises questions about what methods to use when we study young children. In this session the presenter will – together with Grethe...... and the methods are discussed in the presentation. References Braswell, G.S. (2006). Socio-cultural Contexts for the Early Development of Semiotic Production. Psychological Bulletin, American Psychological Association 132 (6): 877–894. Fink-Jensen, K. (2007). Attunement and Bodily Dialogues in Music Education...

13. Fabricating tungsten crucibles by drawing and extrusion spinning

International Nuclear Information System (INIS)

Edstrom, C.M.

1981-01-01

The fabrication of seamless tungsten crucibles 127-mm ID x 265-mm high x 6.25-mm wall thickness (5 in. x 10 1/2 in. x 1/4 in.) involved three drawing operations and extrusion spinning. The success of the drawing operations came from a combination of low draw reduction percentage, generous draw radii, large punch-to-die clearance, and attention to drawing temperature. The extrusion spinning success related to good drawn-cup-to-spinning-mandrel fit prior to making the extrusion passes, removal of stress risers in the part prior to spinning, and special attention to part and mandrel temperature

14. Evaluation of family drawings of physically and sexually abused children.

Science.gov (United States)

Piperno, Francesca; Di Biasi, Stefania; Levi, Gabriel

2007-09-01

The aim of this study is to analyse the family drawings of two groups of physically and/or sexually abused children as compared to the drawings of non-abused children of a matched control group. The drawings by 12 physically abused, 12 sexually abused and 12 non-abused children, all aged between 5 years-old and 10 years-old, were assessed and compared. Family drawings were analysed using a specific Screening Inventory (FDI-Family Drawing Inventory). This Inventory takes into consideration such qualitative and quantitative variables as the quality of drawing, the children's perception of their family members and their own perception of themselves within the family system. The results have shown significant differences between the abused minors and the control group. Abused children are more likely to draw distorted bodies, the human figure is usually represented devoid of details, their drawings generally show clear signals of trauma and the majority of the abused children are likely to exclude their primary caregiver from the drawings. The "drawings of the family" of physically and/or sexually abused children significantly evidence a greater emotional distress then the drawings of the non-abused children of the matched control group.

15. Comparison of the neural basis for imagined writing and drawing.

Science.gov (United States)

Harrington, Greg S; Farias, Dana; Davis, Christine H; Buonocore, Michael H

2007-05-01

Drawing and writing are complex processes that require the synchronization of cognition, language, and perceptual-motor skills. Drawing and writing have both been utilized in the treatment of aphasia to improve communication. Recent research suggests that the act of drawing an object facilitated naming, whereas writing the word diminished accurate naming in individuals with aphasia. However, the relationship between object drawing and subsequent phonological output is unclear. Although the right hemisphere is characteristically mute, there is evidence from split-brain research that the right hemisphere can integrate pictures and words, likely via a semantic network. We hypothesized that drawing activates right hemispheric and left perilesional regions that are spared in aphasic individuals and may contribute to semantic activation that supports naming. Eleven right-handed subjects participated in a functional MRI (fMRI) experiment involving imagined drawing and writing and 6 of the 11 subjects participated in a second fMRI experiment involving actual writing and drawing. Drawing and writing produced very similar group activation maps including activation bilaterally in the premotor, inferior frontal, posterior inferior temporal, and parietal areas. The comparison of drawing vs. writing revealed significant differences between the conditions in areas of the brain known for language processing. The direct comparison between drawing and writing revealed greater right hemisphere activation for drawing in language areas such as Brodmann area (BA) 46 and BA 37.

16. Visualizations as Projection Devices

DEFF Research Database (Denmark)

Harty, Chris; Holm Jacobsen, Peter; Tryggestad, Kjell

The aim of this paper is to inquire into the role of project visualizations in shaping healthcare spaces and practices. The study draws upon an ethnographic field study from a large on-going hospital construction project in Denmark, and focuses on the early phases of on-boarding the design team...... into the project organization. During the on-boarding visualizations multiplies in form, content and purpose, ranging from paper and digitally based projections of clinical work spaces and practices for the future hospital building in use, to paper and digitally based projections of the cost budget and time...

17. Brief report: human figure drawings by children with Asperger's syndrome.

Science.gov (United States)

Lim, Hui Keow; Slaughter, Virginia

2008-05-01

Twenty-nine children with Asperger's syndrome and 28 typically developing children, matched on gender, chronological age and nonverbal IQ, were asked to produce a free drawing, then requested to draw a person, a house and a tree. The drawings were scored using standardized procedures for assessing accuracy, detail and complexity. There were no differences between the diagnostic groups on the tree or house drawing scores. The human figure drawing scores of children with Asperger's syndrome were significantly lower than those of the typically developing children, and there was a positive correlation between human figure drawing scores and communication sub-scores on the Vineland Adaptive Behaviour Scales, for the Asperger's group. These results suggest that the selective deficit in generating human figure representations may derive from a relative lack of interest in the social world, and/or limited practice in drawing people.

18. Impact of manual preference on directionality in children's drawings.

Science.gov (United States)

Picard, Delphine

2011-01-01

The effects of handedness on directionality in drawing are already well documented in the literature, at least as far as adults are concerned. The present study investigates the impact of manual preference on directionality as seen in the drawing product and drawing process, from a developmental point of view. A total of 120 children aged 5 to 9, both right and left-handed drawers, volunteered for the study. Children were asked to draw twice from memory a set of six common objects. Results indicate that directionality in drawing product varies significantly according to manual preference in the 9-year-old children, but not in the younger age groups. The concomitant increase between 7 and 9 years of age in the use of preferred stroke directions and the impact of manual preference in the drawing process suggests that biomechanical factors might play an important role in behavioural asymmetries in drawing.

19. Accessible engineering drawings for visually impaired machine operators.

Science.gov (United States)

Ramteke, Deepak; Kansal, Gayatri; Madhab, Benu

2014-01-01

An engineering drawing provides manufacturing information to a machine operator. An operator plans and executes machining operations based on this information. A visually impaired (VI) operator does not have direct access to the drawings. Drawing information is provided to them verbally or by using sample parts. Both methods have limitations that affect the quality of output. Use of engineering drawings is a standard practice for every industry; this hampers employment of a VI operator. Accessible engineering drawings are required to increase both independence, as well as, employability of VI operators. Today, Computer Aided Design (CAD) software is used for making engineering drawings, which are saved in CAD files. Required information is extracted from the CAD files and converted into Braille or voice. The authors of this article propose a method to make engineering drawings information directly accessible to a VI operator.

20. Modifications to River Protection Project (RPP) Level -0 Logic

International Nuclear Information System (INIS)

SEEMAN, S.E.

2000-01-01

The following modifications were made to the River Protection Project Level-0 logic in going from Rev. I to Rev. 2. The first change was the change to the heading at the top of the drawing: ''TWRS Program Logic'' to ''River Protection Project Mission Logic''. Note that purely format changes (e.g., fonts, location of boxes, date format, addition of numbers to ''ghost'' boxes) are not discussed. However, the major format change was to show DOE-BNFL Inc. Interface Control Documents (ICDs) on the logic

1. AVE project

International Nuclear Information System (INIS)

2004-01-01

During 1998, ANAV began to optimize Human Resources to cope with the ERE and ANA-ANV integration. Project AVE was intended to achieve an orderly transfer of know-how, skills, attitudes and experiences. The most complex part was renovation of personnel with Operating Licenses. Nearly 140 people had joined the organization by late December 2003. This opportunity was seized to draw up a new Training Manual, and a common Initial Training Plan was designed for the two plants, accounting for the singularities of each one. The plan is divided into 5 modules: Common Training, Specific Training, PEI/CAT, Management, and on-the-job Training. The training environments were defined according to the nature of the capabilities to be acquired. Project AVE resulted in the merger of the Asco and Vandellos II Training services. (Author)

2. Skepticism and Denial: Drawing a line

Science.gov (United States)

Byrne, J. M.; Brown, M. B.; Peacock, K.

2016-12-01

Climate denialism is distinct from a merely skeptical attitude towards generally accepted views in climate science. But drawing the line between them takes care—there are similarities between skepticism and denial, including a shared reluctance to accept conclusions that nearly all qualified scientists take to be well-justified. Here we will explore both how to draw the line, and how to effectively communicate the differences between denial and skepticism. Identifying which of these two terms best describes someone's attitude turns on whether they reject a generally accepted view based on a high threshold' for acceptance of conclusions in general, or from a preference that the conclusion in question be false. In most cases, denialism manifests in disregard and mistreatment of evidence, including selective quotation, credulous endorsement of bad sources and incredulous rejection of good sources. Historically, current accepted views became dominant as alternatives were excluded and arguments supporting current views accumulated. The accumulated record of evidence and successful application of those views sets a high bar for proposed alternatives to them. Pure skeptics may refuse to endorse generally accepted views without rejecting or distorting the strong evidence for those views, and typically support policy responses based on the implications of that evidence. But deniers who reject scientific conclusions reject the evidence for those views while endorsing views that a true skeptic would regard as less plausible and well-supported than the accepted views. Thus motivated cognition is the key to defining denial. Pascal's famous argument for belief in God illustrates the problem: even assuming God's existence to be extremely improbable, the expected value of believing is far higher than the expected value of disbelieving. But Pascal's argument undermines its own methodology: without reasons to rely on beliefs as reliable guides to successful action, cost

3. A Study on the Spontaneous Representation of Animals in Young Children’s Drawings of Plant Life

Directory of Open Access Journals (Sweden)

José Domingo Villarroel

2018-03-01

Full Text Available Previous research indicates that complex biological concepts may be successfully introduced in preschool age, provided that suitable educational interventions are designed for the initial stages of education. In this regard, there is evidence that a basic understanding of the issue of the ecological interactions among organisms may be achieved in the preschool years. With this in mind, this research project tests the assumption that recognising the fact that plants and animals are not isolated creatures, but live engaged in constant interactions in nature, may begin to be understood in early education. To that end, this study examines the content of free drawings that a sample of 328 children aged four to seven years of age, undertook when explaining their understanding of plant life. Data regarding the type and frequency of the depictions of animals found in the children’s graphic explanations on flora is collected and read in conjunction with participants’ gender and academic level. The results show that a substantial proportion of the children in the sample spontaneously drew illustrations of animals in their graphic explanations concerning vegetable life and, more significantly, some pictures show plants and animals engaged in clear contact. This is the case, despite the fact that the drawing activity had been focused solely on the issue of plant life and no indication linked to depicting other kinds of living things mentioned during the activity. The conclusions discuss the data collected in connection with the growing number of research projects that study the question of how young children begin to embrace the fundamental biological concepts that pave the way to the understanding of natural phenomena and make the public capable of making responsible choices when it comes to sustainability issues.

4. Micro Wire-Drawing: Experiments And Modelling

International Nuclear Information System (INIS)

Berti, G. A.; Monti, M.; Bietresato, M.; D'Angelo, L.

2007-01-01

In the paper, the authors propose to adopt the micro wire-drawing as a key for investigating models of micro forming processes. The reasons of this choice arose in the fact that this process can be considered a quasi-stationary process where tribological conditions at the interface between the material and the die can be assumed to be constant during the whole deformation. Two different materials have been investigated: i) a low-carbon steel and, ii) a nonferrous metal (copper). The micro hardness and tensile tests performed on each drawn wire show a thin hardened layer (more evident then in macro wires) on the external surface of the wire and hardening decreases rapidly from the surface layer to the center. For the copper wire this effect is reduced and traditional material constitutive model seems to be adequate to predict experimentation. For the low-carbon steel a modified constitutive material model has been proposed and implemented in a FE code giving a better agreement with the experiments

5. Spiritual Art: A Study of Illuminated Drawings

Directory of Open Access Journals (Sweden)

Fatemeh Kateb

2017-12-01

Full Text Available Illumination can be seen as a collection of exquisite and novel designs that painters and illumination-workers use to make religious, scientific, cultural, historical, and other collections of work beautiful. The professionals of illumination use these techniques in books to beautifully virtualize the golden pages of the eternal literature and the religious texts of their homeland. In this way, the sides and margins of the pages are decorated with designs of Islimi (arabesque branches, stems, flowers, and Cathay (Khataei leaves. Illuminations like paintings have various schools and periods, such as the Seljuk, Bukhara, Timurid, Safavid, Qajar schools, with further branches within each school. The illuminations of different periods represent the states and spirits of those eras. However, the illustrated paintings have been performed in the primary state in each school and era with some minor differences in colors and designs, and it can be said that the basis of the illustrated designs are three geometric shapes of the square, circle and triangle, and the combination of these three shapes. In this article, we try to study illumination drawings in terms of the spiritual dimension and its effect on the soul and psych. Furthermore; we will study the spiritual nature of the motifs in order to achieve a deeper understanding of the spirit of Islamic art.

6. Drawing melodies: evaluation of chironomic singing synthesis.

Science.gov (United States)

d'Alessandro, Christophe; Feugère, Lionel; Le Beux, Sylvain; Perrotin, Olivier; Rilliard, Albert

2014-06-01

Cantor Digitalis, a real-time formant synthesizer controlled by a graphic tablet and a stylus, is used for assessment of melodic precision and accuracy in singing synthesis. Melodic accuracy and precision are measured in three experiments for groups of 20 and 28 subjects. The task of the subjects is to sing musical intervals and short melodies, at various tempi, using chironomy (hand-controlled singing), mute chironomy (without audio feedback), and their own voices. The results show the high accuracy and precision obtained by all the subjects for chironomic control of singing synthesis. Some subjects performed significantly better in chironomic singing compared to natural singing, although other subjects showed comparable proficiency. For the chironomic condition, mean note accuracy is less than 12 cents and mean interval accuracy is less than 25 cents for all the subjects. Comparing chironomy and mute chironomy shows that the skills used for writing and drawing are used for chironomic singing, but that the audio feedback helps in interval accuracy. Analysis of blind chironomy (without visual reference) indicates that a visual feedback helps greatly in both note and interval accuracy and precision. This study demonstrates the capabilities of chironomy as a precise and accurate mean for controlling singing synthesis.

7. Deep Drawing Simulations With Different Polycrystalline Models

Science.gov (United States)

Duchêne, Laurent; de Montleau, Pierre; Bouvier, Salima; Habraken, Anne Marie

2004-06-01

The goal of this research is to study the anisotropic material behavior during forming processes, represented by both complex yield loci and kinematic-isotropic hardening models. A first part of this paper describes the main concepts of the Stress-strain interpolation' model that has been implemented in the non-linear finite element code Lagamine. This model consists of a local description of the yield locus based on the texture of the material through the full constraints Taylor's model. The texture evolution due to plastic deformations is computed throughout the FEM simulations. This local yield locus' approach was initially linked to the classical isotropic Swift hardening law. Recently, a more complex hardening model was implemented: the physically-based microstructural model of Teodosiu. It takes into account intergranular heterogeneity due to the evolution of dislocation structures, that affects isotropic and kinematic hardening. The influence of the hardening model is compared to the influence of the texture evolution thanks to deep drawing simulations.

8. Exploration of polyelectrolytes as draw solutes in forward osmosis processes

KAUST Repository

Ge, Qingchun

2012-03-01

The development of the forward osmosis (FO) process has been constrained by the slow development of appropriate draw solutions. Two significant concerns related to draw solutions are the draw solute leakage and intensiveenergy requirement in recycling draw solutes after the FO process. FO would be much attractive if there is no draw solute leakage and the recycle of draw solutes is easy and economic. In this study, polyelectrolytes of a series of polyacrylic acid sodium salts (PAA-Na), were explored as draw solutes in the FO process. The characteristics of high solubility in water and flexibility in structural configuration ensure the suitability of PAA-Na as draw solutes and their relative ease in recycle through pressure-driven membrane processes. The high water flux with insignificant salt leakage in the FO process and the high salt rejection in recycle processes reveal the superiority of PAA-Na to conventional ionic salts, such as NaCl, when comparing their FO performance via the same membranes. The repeatable performance of PAA-Na after recycle indicates the absence of any aggregation problems. The overall performance demonstrates that polyelectrolytes of PAA-Na series are promising as draw solutes, and the new concept of using polyelectrolytes as draw solutes in FO processes is applicable. © 2011 Elsevier Ltd.

9. A new theory on children's drawings: Analyzing the role of emotion and movement in graphical development.

Science.gov (United States)

Quaglia, Rocco; Longobardi, Claudio; Iotti, Nathalie O; Prino, Laura E

2015-05-01

The aim of this paper is to develop a new understanding of children's drawings and to provide ideas for future research in early childhood. Starting from classic theories on child graphical development, we proceed to analyze them and provide our own views on the subject. We will also recount a number of relevant empirical studies that appear to validate our theory. Our belief is that emotion and self-expression through movement play a key role in the development of child art, and that this may be already visible during the scribbling stage of drawing. Copyright © 2015 Elsevier Inc. All rights reserved.

10. Comparison of changes in oxygenated hemoglobin during the tree-drawing task between patients with schizophrenia and healthy controls.

Science.gov (United States)

Nakano, Shinya; Shoji, Yoshihisa; Morita, Kiichiro; Igimi, Hiroyasu; Sato, Mamoru; Ishii, Youhei; Kondo, Akihiko; Uchimura, Naohisa

2018-01-01

Tree-drawing test is used as a projective psychological test that expresses the abnormal internal experience in patients with schizophrenia (SZ). Despite the widely accepted view that the cognitive function is involved in characteristic tree-drawing in patients with SZ, no study has psychophysiologically examined it. The present study aimed to investigate the involvement of cognitive function during tree-drawing in patients with SZ. For that purpose, we evaluated the brain function in patients with SZ during a tree-drawing task by using near-infrared spectroscopy (NIRS) and compared them with those in healthy controls. The subjects were 28 healthy controls and 28 patients with SZ. Changes in the oxygenated hemoglobin ([oxy-Hb]) concentration in both the groups during the task of drawing a tree imagined freely (free-drawing task) and the task of copying an illustration of a tree (copying task) were measured by using NIRS. Because of the difference between the task conditions, [oxy-Hb] levels in controls during the free-drawing task were higher than that during the copying task at the bilateral frontal pole regions and left inferior frontal region. Because of the difference between the groups, [oxy-Hb] levels at the left middle frontal region, bilateral inferior frontal regions, bilateral inferior parietal regions, and left superior temporal region during the free-drawing task in patients were lower than that in controls. [oxy-Hb] during the tree-drawing task in patients with SZ was lower than that in healthy controls. Our results suggest that brain dysfunction in patients with SZ might be associated with their tree-drawing.

11. The effect of hot multistage drawing on molecular structure and optical properties of polyethylene terephthalate fibers

Directory of Open Access Journals (Sweden)

Aminoddin Haji

2012-08-01

Full Text Available In this work, mechanical and structural parameters related to the optical properties of polyethylene terephthalate (PET fibers drawn at hot multistage have been investigated. The changes in optical parameters upon changing draw ratio are used to obtain the mechanical orientation factors and , various orientation functions f2(θ, f4(θ and f6(θ, and amorphous and crystalline orientation functions (f a and f c. Also, the numbers of random links between the network junction points (N1, the average optical orientation (Fav, and the distribution function of segment ω(cos θ were calculated. In addition, an empirical formula was suggested to correlate changes in the birefringence with the draw ratio and its constants were determined. The study demonstrated change on the molecular orientation functions and structural parameters upon hot multistage drawing. Significant variations in the characteristic properties of the drawn PET fibers were due to reorientation of the molecules caused by applied heat and external tension.

12. Characteristics of depression in community-dwelling elderly people as indicated by the tree-drawing test.

Science.gov (United States)

Murayama, Norio; Endo, Tadashi; Inaki, Koichiro; Sasaki, Shinsai; Fukase, Yuko; Ota, Kazumi; Iseki, Eizo; Tagaya, Hirokuni

2016-07-01

The tree-drawing test (TDT) is a typical projective method, but previous studies have paid little attention to it for elderly people. We investigated the characteristics of depression in community-dwelling elderly people as indicated by the TDT. This study was a complete enumeration survey of elderly people conducted through home visits. The contents of the survey included gender, age, presence or absence of housemates, frequency of going out, the 15-item Geriatric Depression Scale, and TDT. The subjects were divided into three groups (normal, depressed tendency, and depressed) according to the total 15-item Geriatric Depression Scale score. In TDT, no significant difference was observed in drooping crown, shadow of the whole tree, or shadow near the base, which have been regarded as indices of depression in younger people. However, the values concerning the size of the tree, such as the height and width of the whole tree, height and width of the crown, and number of occupied areas (of the paper), were significantly lower in the depressed group than in the other groups. In addition, the width of the trunk was significantly smaller in the depressed group than in the normal group. Subjects were classified as being in a 'depressed state' if they used 40 or fewer areas for drawing (i.e. occupied areas) and a 'non-depressed state' if they used 41 or more areas. This enabled depression to be detected (sensitivity: 71.4%; specificity: 79.9%). The size of the tree in TDT is suggested to reflect characteristics of depression in elderly people, such as introversion, reserve, antisocial attitude, a feeling of inferiority, weakness of ego, and lack of vigour. Furthermore, the numbers of occupied areas were found to be relatively useful in detecting depression in elderly people. © 2015 The Authors. Psychogeriatrics © 2015 Japanese Psychogeriatric Society.

13. An analysis of line-drawings based upon automatically inferred grammar and its application to chest x-ray images

International Nuclear Information System (INIS)

Nakayama, Akira; Yoshida, Yuuji; Fukumura, Teruo

1984-01-01

There is a technique using inferring grammer as image- structure analyzing technique. This technique involves a few problems if it is applied to naturally obtained images, as the practical grammatical technique for two-dimensional image is not established. The authors developed a technique which solved the above problems for the main purpose of the automated structure analysis of naturally obtained image. The first half of this paper describes on the automatic inference of line drawing generation grammar and the line drawing analysis based on that automatic inference. The second half of the paper reports on the actual analysis. The proposed technique is that to extract object line drawings out of the line drawings containing noise. The technique was evaluated for its effectiveness with an example of extracting rib center lines out of thin line chest X-ray images having practical scale and complexity. In this example, the total number of characteristic points (ends, branch points and intersections) composing line drawings per one image was 377, and the total number of line segments composing line drawings was 566 on average per sheet. The extraction ratio was 86.6 % which seemed to be proper when the complexity of input line drawings was considered. Further, the result was compared with the identified rib center lines with the automatic screening system AISCR-V3 for comparison with the conventional processing technique, and it was satisfactory when the versatility of this method was considered. (Wakatsuki, Y.)

14. Organigraphs: drawing how companies really work.

Science.gov (United States)

Mintzberg, H; Van der Heyden, L

1999-01-01

Walk into any organization and you will get a snapshot of the company in action--people and products moving every which way. But ask for a picture of the company and you will be given the org chart, with its orderly little boxes showing just the names and titles of managers. Now there's a more revealing way to depict the people and operations within an organization--an approach called the organigraph. The organigraph is not a chart. It's a map that offers an overview of the company's functions and the ways that people organize themselves at work. Perhaps most important, an organigraph can help managers see untapped competitive opportunities. Drawing on the organigraphs they created for about a dozen companies, authors Mintzberg and Van der Heyden illustrate just how valuable a tool the organigraph is. For instance, one they created for Electrocomponents, a British distributor of electrical and mechanical items, led managers to a better understanding of the company's real expertise--business-to-business relationships. As a result of that insight, the company wisely decided to expand in Asia and to increase its Internet business. As one manager says, "It allowed the company to see all sorts of new possibilities." With traditional hierarchies vanishing and newfangled--and often quite complex--organizational forms taking their place, people are struggling to understand how their companies work. What parts connect to one another? How should processes and people come together? Whose ideas have to flow where? With their flexibility and realism, organigraphs give managers a new way to answer those questions.

15. Improvement of cold wire drawing process by electropulsing

OpenAIRE

Sánchez Egea, Antonio José; González Rojas, Hernan Alberto; Jorba Peiró, Jordi

2015-01-01

The electroplastic effects on wire drawing process assisted with different short time current pulses configurations are investigated experimentally. The current pulses were induced to a specimen during the drawing process. The studied material is the 308L stainless steel. Current densities of 185 A/mm2, frequencies range from 140 to 350 Hz and pulse duration range from 100 to 250 μs were used in the electrically‐assisted wire drawing process. Frequency and pulse duration are...

16. Drawing on student knowledge of neuroanatomy and neurophysiology.

Science.gov (United States)

Slominski, Tara N; Momsen, Jennifer L; Montplaisir, Lisa M

2017-06-01

17. Drawings of fossils by Robert Hooke and Richard Waller

Science.gov (United States)

Kusukawa, Sachiko

2013-01-01

The drawings of fossils by Robert Hooke and Richard Waller that were the basis of the engravings in Hooke's Posthumous works (1705) are published here for the first time. The drawings show that both Hooke and Waller were proficient draftsmen with a keen eye for the details of petrified objects. These drawings provided Hooke with a polemic edge in making the case for the organic origins of ‘figured stones’.

18. Development of Alarm System link Drawing for Operation Support for APR1400 Digital Main Control Room

International Nuclear Information System (INIS)

Kim, Ki-Hwan

2016-01-01

Digitalized MMI(Man-Machine Interface) including Digital Main Control Room(MCR) and digital I and C system was being applied for SKN 3 and 4 Nuclear Power Plant(NPP) and subsequent APR1400 NPP type. But, operators can not easily find instrument for alarm immediately. Therefore, Alarm system is required to easily find instrument for Alarm. For this implementation, we will plan system design considering design feature without affecting network load and CPU load. We have developed Alarm system link drawing for digital MCR. Operators of the digitalized MCR navigates from their consoles to the drawings related to the plant alarms and their instruments or the operation status. Such method gives cognitive load to the operators having to travel to different locations in finding the related information. Screen Sharing System, which is the fundamental technique for Drawing Interconnection Alarm System is close to completion, and it should be functionally tested and verified by the human factor engineering. For the actual application to the operating plants, the drawings to be interconnected to the alarms and the opinions from the operators/maintenance departments for designating alarm number should be surveyed, Also, another function that allows the access to the alarm related drawings not only from the MCR but also from the other offices

19. Development of Alarm System link Drawing for Operation Support for APR1400 Digital Main Control Room

Energy Technology Data Exchange (ETDEWEB)

Kim, Ki-Hwan [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

Digitalized MMI(Man-Machine Interface) including Digital Main Control Room(MCR) and digital I and C system was being applied for SKN 3 and 4 Nuclear Power Plant(NPP) and subsequent APR1400 NPP type. But, operators can not easily find instrument for alarm immediately. Therefore, Alarm system is required to easily find instrument for Alarm. For this implementation, we will plan system design considering design feature without affecting network load and CPU load. We have developed Alarm system link drawing for digital MCR. Operators of the digitalized MCR navigates from their consoles to the drawings related to the plant alarms and their instruments or the operation status. Such method gives cognitive load to the operators having to travel to different locations in finding the related information. Screen Sharing System, which is the fundamental technique for Drawing Interconnection Alarm System is close to completion, and it should be functionally tested and verified by the human factor engineering. For the actual application to the operating plants, the drawings to be interconnected to the alarms and the opinions from the operators/maintenance departments for designating alarm number should be surveyed, Also, another function that allows the access to the alarm related drawings not only from the MCR but also from the other offices.

20. [Listening to children through drawings in transcultural consultations].

Science.gov (United States)

Rizzi, Alice Titia; Bouaziz, Nora; Moro, Marie Rose

2014-01-01

The transcultural consultation is a form of group therapy which is aimed at families from other countries, using a method which enables children, through drawing, to express themselves in a group. The favoured means of communication for children, drawing is an effective way of liberatingthoughts and giving meaning to family history. Incorporated into the overall narrative, it can thereby be a form of mediation, on condition that it is integrated into the therapeutic programme. This article reflects on the characteristics of the drawings produced by these children who have different cultures and different ways of drawing.

1. The neural basis for simulated drawing and the semantic implications.

Science.gov (United States)

Harrington, Greg S; Farias, Dana; Davis, Christine H

2009-03-01

This functional magnetic resonance imaging (fMRI) study of the mental simulation of drawing (1) investigated the neural substrates of drawing and (2) delineated the semantic aspects of drawing. The goal was to advance our understanding of how drawing a familiar object is linked to lexical semantics and therefore a viable method to use to rehabilitate aphasia. We hypothesized that the semantic aspects of drawing familiar objects compared to drawing non-objects would yield greater activation in the inferior temporal cortex and the inferior frontal cortex of the left hemisphere. To test this hypothesis, eight right-handed subjects performed an fMRI experiment that directly contrasted drawing familiar objects to non-objects using mental imagery. Simulated drawing recruited a large, distributed network of frontal, parietal, and temporal structures. In the contrast comparing drawing familiar objects to non-objects there was stronger activation in the left hemisphere within the inferior temporal, anterior inferior frontal, inferior parietal and superior frontal cortices. The activation within the inferior temporal cortex was associated with visual semantic processing and semantic mediated naming. We suggest that the anterior inferior frontal activation is linked to the inferior temporal cortex and is involved in the selection of specific semantic features of the object as well as retrieval of information regarding the perceptual aspects of the object.

2. Experimental study on titanium wire drawing with ultrasonic vibration.

Science.gov (United States)

Liu, Shen; Shan, Xiaobiao; Guo, Kai; Yang, Yuancai; Xie, Tao

2018-02-01

Titanium and its alloys have been widely used in aerospace and biomedical industries, however, they are classified as difficult-to-machine materials. In this paper, ultrasonic vibration is imposed on the die to overcome the difficulties during conventional titanium wire drawing processes at the room temperature. Numerical simulations were performed to investigate the variation of axial stress within the contacting region and study the change of the drawing stress with several factors in terms of the longitudinal amplitude and frequency of the applied ultrasonic vibration, the diameter reduction ratio, and the drawing force. An experimental testing equipment was established to measure the drawing torque and rotational velocity of the coiler drum during the wire drawing process. The result indicates the drawing force increases with the growth of the drawing velocity and the reduction ratio, whether with or without vibrations. Application of either form of ultrasonic vibrations contributes to the further decrease of the drawing force, especially the longitudinal vibration with larger amplitude. SEM was employed to detect the surface morphology of the processed wires drawn under the three circumstances. The surface quality of the drawn wires with ultrasonic vibrations was apparently improved compared with those using conventional method. In addition, the longitudinal and torsional composite vibration was more effective for surface quality improvement than pure longitudinal vibration, however, at the cost of weakened drawing force reduction effect. Copyright © 2017 Elsevier B.V. All rights reserved.

3. Drawing Disorders in Alzheimer's Disease and Other Forms of Dementia.

Science.gov (United States)

Trojano, Luigi; Gainotti, Guido

2016-04-21

Drawing is a multicomponential process that can be impaired by many kinds of brain lesions. Drawing disorders are very common in Alzheimer's disease and other forms of dementia, and can provide clinical information for the distinction of the different dementing diseases. In our review we started from an overview of the neural and cognitive bases of drawing, and from a recollection of the drawing tasks more frequently used for assessing individuals with dementia. Then, we analyzed drawing disorders in dementia, paying special attention to those observed in Alzheimer's disease, from the prodromal stages of the amnesic mild cognitive impairment to the stages of full-blown dementia, both in the sporadic forms with late onset in the entorhino-hippocampal structures and in those with early onset in the posterior neocortical structures. We reviewed the drawing features that could differentiate Alzheimer's disease from vascular dementia and from the most frequent forms of degenerative dementia, namely frontotemporal dementia and Lewy body disease. Finally, we examined some peculiar aspects of drawing disorders in dementia, such as perseverations, rotations, and closing-in. We argue that a careful analysis of drawing errors helps to differentiate the different forms of dementia more than overall accuracy in drawing.

4. [Spanish normative studies in a young adult population (NEURONORMA young adults Project): norms for the verbal span, visuospatial span, Letter-Number Sequencing, Trail Making Test and Symbol Digit Modalities Test].

Science.gov (United States)

Tamayo, F; Casals-Coll, M; Sánchez-Benavides, G; Quintana, M; Manero, R M; Rognoni, T; Calvo, L; Palomo, R; Aranciva, F; Peña-Casanova, J

2012-01-01

5. Using Drawings and Collages as Data Generation Methods With Children

Directory of Open Access Journals (Sweden)

Nokhanyo Nomakhwezi Mayaba

2015-12-01

Full Text Available Appropriate data generation methods are key to a successful research project to attain rich and relevant data. When doing research with children, the methods selected should be age appropriate and enable them to contribute their ideas in the research process. However, data generation with children is not “child’s play”—it is a challenging task that requires careful design on the part of the researcher. We conducted a study in South Africa with children between the ages of 9 and 14 who were orphaned and rendered vulnerable by HIV and AIDS in order to explore if, and how, the use of participatory visual methods might enhance resilience. In this article, we provide a reflective account of the research process and discuss lessons learnt from our experiences of using drawings and collage as data generation methods when doing research with children. This article contributes to the literature on the use of participatory visual methods as data generation strategies with children highlighting some caveats and offering insight into how challenges could be circumvented.

6. Use of software to optimize time and costs in the elaboration of the basic drawing

Energy Technology Data Exchange (ETDEWEB)

Costa, Tchaikowisky M. [Faculdade de Tecnologia e Ciencias (FTC), Itabuna, BA (Brazil); Bresci, Claudio T.; Franca, Carlos M.M. [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

2009-07-01

In order to choose areas to implement pipe yards, terminals, campsite, pipeline path and other areas of assistance for the construction and assembly of the pipeline, it is necessary previous location studies to elaborate the basic drawing. However it is not always possible to contract a company registered in aerial survey to elaborate this type of drawing, either for the cost or time, and where the lack of a basic drawing can lead to an erroneous choice or one which reflects an exaggerated estimate or not adequate logistics. In order to minimize costs and optimizing time, without compromising quality, this study proposes the use of software 'virtual globe' type for mapping and geographic location available on the internet to assist in the gathering of geographical, altimetric, hydro graphic, road, environmental, socioeconomic and aerial images, information necessary to elaborate the basic drawing. This article includes a case study of the oil pipeline Cacimbas-Barra do Riacho project and a proposed procedure to be used in the elaboration of basic drawings using data generated using the referred to software. In 2007 the Pipeline Construction and Assembly sector, CMDPI unit of PETROBRAS Engenharia/IETEG/IEDT was designated to select an area of 2 hectares where the pipe storage yard for pipes to be used in the Oil Pipeline Cacimbas- Barra do Riacho in Espirito Santo state would be constructed. The area was chosen following some pre-requisites and using as main resources in the gathering of information necessary to select the area, 'virtual globe' type software and a CAD type software with the capacity to import images and altimetric identification as well as exporting drawing data to the mentioned. The activity, much simpler than hiring an aerial survey, was elaborated surpassing expectations of time-costs besides complying with the necessary technical demands. (author)

7. Deep drawing experiences of niobium disk for PEFP SRF cavity prototype

International Nuclear Information System (INIS)

Kim, Han Sung; An, Sun; Zhang, Liping; Tang, Yazhe; Li, Ying Min; Kwon, Hyeok Jung; Cho, Yong Sub

2009-01-01

A superconducting radio frequency (SRF) cavity with a geometrical beta of 0.42 has been designed to accelerate a proton beam after 100 MeV for an extension of Proton Engineering Frontier Project (PEFP). The designed cavity shape is an elliptical and the resonant frequency is 700 MHz. In order to confirm the RF and mechanical properties of the cavity, two prototypes of copper cavities have been fabricated and tested. Based on the experiences gained with the copper prototypes, two niobium prototypes have been designed. One is two-cell cavity and the other is five cell cavity. The two-cell cavity is for finalizing the niobium cavity production procedure and testing the cavity RF properties at a low temperature and moderate power level. The five-cell cavity is for checking the production quality and testing vertical test system in the future. Both of them are under fabrication. Through the fabrication of the niobium prototype, several issues such as deep drawing, electron beam welding and surface treatment will be addressed. The drawing of the PEPF SRF low beta cavity is shown in Fig. 1. Major parameters for the cavity are like following. - Frequency: 700 MHz - Operating mode: TM010 pi mode - Cavity type: Elliptical - Geometrical beta: 0.42 - Number of cells: 5 per cavity - Accelerating gradient: 8 MV/m - Epeak/Eacc: 3.71 - Bpeak/Eacc: 7.47 mT/(MV/m) - R/Q: 102.3 ohm - Epeak: 29.68 MV/m - Field flatness: 1.56 % - Cell to cell coupling: 1.41 % - Geometrical factor: 121.68 ohm - Cavity wall thickness: 4.3 mm - Lorentz force detuning: 0.4 Hz/(MV/m)2 - Stiffening structure: Double ring - Effective length: 0.45 m - External Q of FPC: 8.0E5 ±20 % - HOM load: less than 2 W - HOM Qext requirement: less than 3.0E5 At present, all the niobium disk and plates for cavity and NbTi flanges for beam pipe flange are prepared

8. Statistical tests for whether a given set of independent, identically distributed draws comes from a specified probability density.

Science.gov (United States)

Tygert, Mark

2010-09-21

We discuss several tests for determining whether a given set of independent and identically distributed (i.i.d.) draws does not come from a specified probability density function. The most commonly used are Kolmogorov-Smirnov tests, particularly Kuiper's variant, which focus on discrepancies between the cumulative distribution function for the specified probability density and the empirical cumulative distribution function for the given set of i.i.d. draws. Unfortunately, variations in the probability density function often get smoothed over in the cumulative distribution function, making it difficult to detect discrepancies in regions where the probability density is small in comparison with its values in surrounding regions. We discuss tests without this deficiency, complementing the classical methods. The tests of the present paper are based on the plain fact that it is unlikely to draw a random number whose probability is small, provided that the draw is taken from the same distribution used in calculating the probability (thus, if we draw a random number whose probability is small, then we can be confident that we did not draw the number from the same distribution used in calculating the probability).

9. Human figure drawings and house tree person drawings as indicators of self-esteem: a quantitative approach.

Science.gov (United States)

Groth-Marnat, G; Roberts, L

1998-02-01

This study assessed the concurrent validity of Human Figure Drawings (HFD) and House-Tree-Person (HTP) drawings as measures of self-esteem. Adult subjects were requested to make HFD and HTP drawings and to complete measures of psychological adjustment which included the Coopersmith Self Esteem Inventory and Tennessee Self Concept Scale. The drawings were scored using a quantitative, composite rating scale derived from HFD and HTP empirical and theoretical literature on psychological health. Results indicated that neither the HFD nor the HTP quantitative composite ratings of psychological health related to the formal measures of self-esteem.

10. Drawing road networks with focus regions.

Science.gov (United States)

Haunert, Jan-Henrik; Sering, Leon

2011-12-01

Mobile users of maps typically need detailed information about their surroundings plus some context information about remote places. In order to avoid that the map partly gets too dense, cartographers have designed mapping functions that enlarge a user-defined focus region--such functions are sometimes called fish-eye projections. The extra map space occupied by the enlarged focus region is compensated by distorting other parts of the map. We argue that, in a map showing a network of roads relevant to the user, distortion should preferably take place in those areas where the network is sparse. Therefore, we do not apply a predefined mapping function. Instead, we consider the road network as a graph whose edges are the road segments. We compute a new spatial mapping with a graph-based optimization approach, minimizing the square sum of distortions at edges. Our optimization method is based on a convex quadratic program (CQP); CQPs can be solved in polynomial time. Important requirements on the output map are expressed as linear inequalities. In particular, we show how to forbid edge crossings. We have implemented our method in a prototype tool. For instances of different sizes, our method generated output maps that were far less distorted than those generated with a predefined fish-eye projection. Future work is needed to automate the selection of roads relevant to the user. Furthermore, we aim at fast heuristics for application in real-time systems. © 2011 IEEE

11. Drawing on Dynamic Local Knowledge through Student-Generated Photography

Science.gov (United States)

Coles-Ritchie, Marilee; Monson, Bayley; Moses, Catherine

2015-01-01

In this research, the authors explored how teachers using student-generated photography draw on local knowledge. The study draws on the framework of funds of knowledge to highlight the assets marginalized students bring to the classroom and the need for culturally relevant pedagogy to address the needs of a diverse public school population. The…

12. Stimulating Scientific Reasoning with Drawing-Based Modeling

Science.gov (United States)

Heijnes, Dewi; van Joolingen, Wouter; Leenaars, Frank

2018-01-01

We investigate the way students' reasoning about evolution can be supported by drawing-based modeling. We modified the drawing-based modeling tool SimSketch to allow for modeling evolutionary processes. In three iterations of development and testing, students in lower secondary education worked on creating an evolutionary model. After each…

13. Latino/a Immigrant Children's Drawings and Writings

Science.gov (United States)

Soto, Lourdes Diaz; Garza, Irene

2011-01-01

This article shares children's drawings and writings reflecting immigration border-crossing experiences in south Texas, USA. The authors present the children's drawings as well as their narratives, relying on the work of Robert Coles and the authors' own intuitive Latina/Xicana lenses. The authors' intent is to pursue the possibility of future…

14. 45 CFR 1309.51 - Submission of drawings and specifications.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Submission of drawings and specifications. 1309.51... DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN, YOUTH AND... and Major Renovation § 1309.51 Submission of drawings and specifications. (a) The grantee may not...

15. Drawing, Visualisation and Young Children's Exploration of "Big Ideas"

Science.gov (United States)

Brooks, Margaret

2009-01-01

It is in the visualisation of ideas, and the expression or representation of our ideas, that we can bring something more clearly into consciousness. A drawing might be seen as an externalisation of a concept or idea. Drawing has the potential to play a mediating role in the visualisation of ideas and concepts in relation to young children…

16. Walking drawings and walking ability in children with cerebral palsy.

Science.gov (United States)

Chong, Jimmy; Mackey, Anna H; Stott, N Susan; Broadbent, Elizabeth

2013-06-01

To investigate whether drawings of the self walking by children with cerebral palsy (CP) were associated with walking ability and illness perceptions. This was an exploratory study in 52 children with CP (M:F = 28:24), mean age 11.1 years (range 5-18), who were attending tertiary level outpatient clinics. Children were asked to draw a picture of themselves walking. Drawing size and content was used to investigate associations with clinical walk tests and children's own perceptions of their CP assessed using a CP version of the Brief Illness Perception Questionnaire. Larger drawings of the self were associated with less distance traveled, higher emotional responses to CP, and lower perceptions of pain or discomfort, independent of age. A larger self-to-overall drawing height ratio was related to walking less distance. Drawings of the self confined within buildings and the absence of other figures were also associated with reduced walking ability. Drawing size and content can reflect walking ability, as well as symptom perceptions and distress. Drawings may be useful for clinicians to use with children with cerebral palsy to aid discussion about their condition. PsycINFO Database Record (c) 2013 APA, all rights reserved.

17. Analysis of Tube Drawing Process – A Finite Element Approach ...

African Journals Online (AJOL)

In this paper the effect of die semi angle on drawing load in cold tube drawing has been investigated numerically using the finite element method. The equation governing the stress distribution was derived and solved using Galerkin finite element method. An isoparametric formulation for the governing equation was utilized ...

18. 33 CFR 117.11 - Unnecessary opening of the draw.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Unnecessary opening of the draw. 117.11 Section 117.11 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS General Requirements § 117.11 Unnecessary opening of the draw. No...

19. Central Waste Complex (CWC) essential/support drawing list

International Nuclear Information System (INIS)

WHITLOCK, R.W.

1999-01-01

Essential and supporting engineering drawings for the Central Waste Complex (CWC) are identified in this document. The purpose of the document is to describe the criteria used to identify drawings and the plan for updating and maintaining their accuracy. This document supports HNF-PRO-242 and HNF-PRO-440

20. Using Drawings in Play Therapy: A Jungian Approach

Science.gov (United States)

Birch, Jennifer; Carmichael, Karla D.

2009-01-01

Counselors working with children employ a variety of therapeutic techniques and tools from various theoretical models. One of these tools, drawing, is increasingly being implemented into play therapy. The purpose of this paper is to briefly review Jungian theoretical approaches as they pertain to drawing techniques within the counseling session.