Cross-shore flow on the inner-shelf off southwest Portugal

Science.gov (United States)

Lamas, L.; Peliz, A.; Oliveira, P.; Dias, J.

2012-04-01

Velocity measurements from 4 bottom-mounted ADCP deployments (summers of 2006, 2007, 2008 and 2011) at a 12-m depth site off Sines, Portugal, complemented with time series of winds, waves and tides, are used to study the inner-shelf cross-shore flow dependence on wave, tidal and wind forcings. During these four summers, the dominating winds are from the north (upwelling-favorable), with strong diurnal sea breeze cycle throughout these periods. This quasi-steady wind circulation is sometimes interrupted by short event-like reversals. The observed records were split in different subsets according to tidal amplitude, wave height, cross- and along-shore wind magnitudes, and the vertical structure of the cross-shore flow was studied for each of these subsets. Despite different forcing conditions, the cross-shore velocity profiles usually show a vertical parabolic structure with maximum onshore flow at mid-depth, resembling the upwelling return flow for mid-shelf conditions, but atypical for the inner-shelf and in disagreement with other inner-shelf studies from other sites. We compare the observations with simplified 2D inner-shelf models and with results from other studies.

Impact Assessment of an Off-Shore Wind Park on Sea Ducks

DEFF Research Database (Denmark)

Guillemette, M.; Larsen, J. K.; Clausager, I.

of the study with a marked difference between Tunø Knob and Ringebjerg Sand in the size available. This was associated with a general impoverishment of the whole benthic community. This suggests that the decrease observed in sea duck abundance over the three years was caused by the availability of food supply......As part of the plan of the Danish government to expand off-shore wind energy production, The Ministry of Environment and Energy, in collaboration with ELSAM (an energy consortium), initiated a three-year study of the potential conflict between the Tunø Knob off-shore wind park and aquatic birds...... in 1994-97. Danish coastal waters support very large, internationally important concentrations of moulting, migrating and wintering sea ducks which depend on shallow water areas as major feeding habitats. Denmark is committed, in relation to international conventions and EU directives, to protect...

Dynamic performance of power generation systems for off-shore oil and gas platforms

DEFF Research Database (Denmark)

Pierobon, Leonardo; Breuhaus, Peter; Haglind, Fredrik

2014-01-01

%) arises on the prediction of the rotational speed of the high pressure shaft, while the largest deviation (average relative error ~20%) occurs in the evaluation of the pressure at the outlet of the low pressure turbine. As waste heat recovery units (e.g. organic Rankine cycles) are likely...... to be implemented in future off-shore platforms, the proposed model may serve in the design phase for a preliminary assessment of the dynamic response of the power generation system and to evaluate if requirements such as minimum and maximum frequency during transient operation and the recovery time are satisfied......On off-shore oil and gas platforms two or more gas turbines typically support the electrical demand on site by operating as a stand-alone (island) power system. As reliability and availability are major concerns during operation, the dynamic performance of the power generation system becomes...

Large-scale integration of off-shore wind power and regulation strategies of cogeneration plants in the Danish electricity system

DEFF Research Database (Denmark)

Østergaard, Poul Alberg

2005-01-01

The article analyses how the amount of a small-scale CHP plants and heat pumps and the regulation strategies of these affect the quantity of off-shore wind power that may be integrated into Danish electricity supply......The article analyses how the amount of a small-scale CHP plants and heat pumps and the regulation strategies of these affect the quantity of off-shore wind power that may be integrated into Danish electricity supply...

Data report of the first cruise of the Marion Off-shore Ecological Study (MOES-1)

CSIR Research Space (South Africa)

Duncombe-Rae, CM

1989-01-01

Full Text Available The first cruise of the Marion Off-shore Ecological Study (MOES-I), during April and May 1987, was a multi-disciplinary effort aimed at gaining a further understanding of the relationships between productivity and the environment in the vicinity...

Design and optimization of air bottoming cycles for waste heat recovery in off-shore platforms

DEFF Research Database (Denmark)

Pierobon, Leonardo; Haglind, Fredrik

2014-01-01

This paper aims at comparing two methodologies to design an air bottoming cycle recovering the waste heat from the power generation system on the Draugen off-shore oil and gas platform. Firstly, the design is determined using the theory of the power maximization. Subsequently, the multi-objective......This paper aims at comparing two methodologies to design an air bottoming cycle recovering the waste heat from the power generation system on the Draugen off-shore oil and gas platform. Firstly, the design is determined using the theory of the power maximization. Subsequently, the multi....... Findings indicate that using the power production, the volume of the recuperator and the net present value as objective functions the optimal pressure ratio (2.52) and the exhaust gas temperature (178.8 °C) differ from the values (2.80 and 145.5 °C) calculated using the theory of the power maximization...

The off-shore Transport of China Coastal Current over Taiwan Bank in Winter

Science.gov (United States)

Liao, E.; Yan, X. H.; Oey, L. Y.; Jiang, Y.

2016-12-01

In winter, an off-shore flow of China Coastal Current can be inferred from satellite and in-situ data over the Taiwan Bank. The dynamics related to this off-shore flow have not been previously explained and are examined here using observations and model. Influenced by southward wind stress and opposing pressure gradient, currents over the Taiwan Bank can be classified into three regimes. The southward China Coastal Current flows pass the Taiwan Bank when the wind stress is stronger than a critical value which depends on the opposite pressure gradient force. The coastal current turns northward under a weak wind stress. Two opposite currents converge over the bank and a branch of the coastal current then turns into the northward warm current when these two forces are in balance. Analysis of the vorticity balance shows that the cross-isobath movement is related to a negative bottom stress curl over the Taiwan Bank. Both bottom Ekman transport and shear and curvature vorticity related to the weak bottom slope over the Taiwan Bank contribute to the bottom stress curl. Composite analyses using observations tend to support the model results.

Legacy material work-off project

International Nuclear Information System (INIS)

Sloan, T.J.; Baker, D.H. IV

1999-01-01

Los Alamos National Laboratory (LANL) and its subcontractors recently completed a nine-month legacy material clean-up effort. Legacy materials were defined as chemicals, hazardous, non-hazardous, and both hazardous and radioactive (mixed), that no longer served a programmatic use and had no identified individual owner within the Laboratory. Once personnel identified the legacy materials, the items were transferred to Solid Waste Operation's (EM-SWO) control. Upon completing this process, the responsible division-level manager was required to certify that all non-radioactive hazardous and non-hazardous materials and acceptable mixed legacy materials had been identified and transferred to EM-SWO for proper handling or disposal. The major expense in this project was the cost of actual chemical and radiological analysis. This expense was the result of items not having an identified individual owner. The major benefit of this project is that LANL is now in an excellent position to implement its Integrated Safety Management (ISM) Plan, which requires the implementation of safe work practices, including requirements for removing unused items when vacating workspaces. Effective implementation of ISM will go a long way toward ensuring that legacy materials are no longer an issue at the Laboratory

Modelling seabird collision risk with off-shore wind farms

Energy Technology Data Exchange (ETDEWEB)

Mateos, Maria; Arroyo, Gonzalo Munoz; Rosario, Jose Juan Alonso del

2011-07-01

Full text: Recent concern about the adverse effects of collision mortality of avian migrants at wind farms has highlighted the need to understand bird-wind turbine interactions. Here, a stochastic collision model, based on data of seabird behaviour collected on- site, is presented, as a flexible and easy to take tool to assess the collisions probabilities of off-shore wind farms in a pre-construction phase. The collision prediction model considering the wind farm area as a risk window has been constructed as a stochastic model for avian migrants, based on Monte Carlo simulation. The model calculates the probable number of birds collided per time unit. Migration volume, wind farm dimensions, vertical and horizontal distribution of the migratory passage, flight direction and avoidance rates, between other variables, are taken into account in different steps of the model as the input variables. In order to assess the weighted importance of these factors on collision probability predictions, collision probabilities obtained from the set of scenarios resulting from the different combinations of the input variables were modelled by using Generalised Additive Models. The application of this model to a hypothetical project for erecting a wind farm at the Strait of Gibraltar showed that collision probability, and consequently mortality rates, strongly depend on the values of the avoidance rates taken into account, and the distribution of birds into the different altitude layers. These parameters should be considered as priorities to be addressed in post-construction studies. (Author)

Decolonizing through integration: Australia's off-shore island territories

Directory of Open Access Journals (Sweden)

Roger Wettenhall

2016-11-01

Full Text Available Australia’s three small off-shore island territories – Norfolk Island in the Pacific Ocean and Christmas Island and the Cocos (Keeling Islands Group in the Indian Ocean – can be seen as monuments to 19th century British-style colonization, though their early paths to development took very different courses. Their transition to the status of external territories of the Australian Commonwealth in the 20th century – early in the case of Norfolk and later in the cases of Christmas and Cocos – put them on a common path in which serious tensions emerged between local populations which sought autonomous governance and the Commonwealth government which wanted to impose governmental systems similar to those applying to mainstream Australians. This article explores the issues involved, and seeks to relate the governmental history of the three island territories to the exploration of island jurisdictions developed in island studies research.

Visual analysis of uncertainties in ocean forecasts for planning and operation of off-shore structures

KAUST Repository

Hollt, Thomas; Magdy, Ahmed; Chen, Guoning; Gopalakrishnan, Ganesh; Hoteit, Ibrahim; Hansen, Charles D.; Hadwiger, Markus

2013-01-01

We present a novel integrated visualization system that enables interactive visual analysis of ensemble simulations used in ocean forecasting, i.e, simulations of sea surface elevation. Our system enables the interactive planning of both the placement and operation of off-shore structures. We illustrate this using a real-world simulation of the Gulf of Mexico. Off-shore structures, such as those used for oil exploration, are vulnerable to hazards caused by strong loop currents. The oil and gas industry therefore relies on accurate ocean forecasting systems for planning their operations. Nowadays, these forecasts are based on multiple spatio-temporal simulations resulting in multidimensional, multivariate and multivalued data, so-called ensemble data. Changes in sea surface elevation are a good indicator for the movement of loop current eddies, and our visualization approach enables their interactive exploration and analysis. We enable analysis of the spatial domain, for planning the placement of structures, as well as detailed exploration of the temporal evolution at any chosen position, for the prediction of critical ocean states that require the shutdown of rig operations. © 2013 IEEE.

Visual analysis of uncertainties in ocean forecasts for planning and operation of off-shore structures

KAUST Repository

Hollt, Thomas

2013-02-01

We present a novel integrated visualization system that enables interactive visual analysis of ensemble simulations used in ocean forecasting, i.e, simulations of sea surface elevation. Our system enables the interactive planning of both the placement and operation of off-shore structures. We illustrate this using a real-world simulation of the Gulf of Mexico. Off-shore structures, such as those used for oil exploration, are vulnerable to hazards caused by strong loop currents. The oil and gas industry therefore relies on accurate ocean forecasting systems for planning their operations. Nowadays, these forecasts are based on multiple spatio-temporal simulations resulting in multidimensional, multivariate and multivalued data, so-called ensemble data. Changes in sea surface elevation are a good indicator for the movement of loop current eddies, and our visualization approach enables their interactive exploration and analysis. We enable analysis of the spatial domain, for planning the placement of structures, as well as detailed exploration of the temporal evolution at any chosen position, for the prediction of critical ocean states that require the shutdown of rig operations. © 2013 IEEE.

Dynamic performance of a combined gas turbine and air bottoming cycle plant for off-shore applications

DEFF Research Database (Denmark)

Benato, Alberto; Pierobon, Leonardo; Haglind, Fredrik

2014-01-01

and a combined gas turbine coupled with an air bottoming cycle plant. The case study is the Draugen off-shore oil and gas platform, located in the North Sea, Norway. The normal electricity demand is 19 MW, currently covered by two gas turbines generating each 50% of the power demand, while the third turbine......When the Norwegian government introduced the CO2 tax for hydrocarbon fuels, the challenge became to improve the performance of off-shore power systems. An oil and gas platform typically operates on an island (stand-alone system) and the power demand is covered by two or more gas turbines. In order...... to improve the plant performance, a bottoming cycle unit can be added to the gas turbine topping module, thus constituting a combined cycle plant. This paper aims at developing and testing the numerical model simulating the part-load and dynamic behavior of a novel power system, composed of two gas turbines...

The fatigue and corrosion fatigue behavior of welded Inconel 625 alloy employed in off-shore platforms; Avaliacao do comportamento a fadiga e a corrosao-fadiga de juntas soldadas da liga Inconel 625 testada para uso em plaaformas off-shore

Energy Technology Data Exchange (ETDEWEB)

Pfingstag, M.E.; Schroeder, R.M.; Mueller, I.L. [Universidade Federal do Rio Grande do Sul (LAPEC/UFRGS), Porto Alegre, RS (Brazil). Dept. de Metalurgia. Lab. de Pesquisa em Corrosao], e-mail: maiquel10@walla.com

2006-07-01

The fatigue and corrosion fatigue behavior of welded Inconel 625 employed live like risers in off-shore platforms was studied. These risers may be employed integrally of this alloy, or combined with API 52 X60 steel in the form of 'Clads'. One of the most susceptible points in .these structures is the circumferential weld that joint the pipes together. In these regions, stresses and defects are generated by the welding process, and these material remind in contact with aggressive species like, chlorides and Co{sub 2} . Polarization curves, slow strain rate fatigue and corrosion fatigue tests were used to characterize the Inconel alloy behavior. In the welded deposit condition, this alloy shows an excellent resistance corrosion and a good fatigue and corrosion-fatigue behavior.(author)

33 CFR 203.49 - Rehabilitation of Hurricane and Shore Protection Projects.

Science.gov (United States)

2010-07-01

... Protection Projects. (a) Authority. The Chief of Engineers is authorized to rehabilitate any Federally authorized hurricane or shore protection structure damaged or destroyed by wind, wave, or water action of an... (exclusive of dredge mobilization and demobilization costs) exceeds $1 million and is greater than two...

Impact assessment of an off-shore wind park on sea ducks

International Nuclear Information System (INIS)

Guillemette, M.; Kyed Larsen, J.; Clausager, I.

1998-03-01

As part of the plan of the Danish government to expand off-shore wind energy production, The Ministry of Environment and Energy, in collaboration with ELSAM (an energy consortium), initiated a three-year study of the potential conflict between the Tunoe Knob off-shore wind park and aquatic birds in 1994-97. Danish coastal waters support very large, internationally important concentrations of moulting, migrating and wintering sea ducks which depend on shallow water areas as major feeding habitats. Denmark is committed, in relation to international conventions and EU directives, to protect and maintain these populations of aquatic birds and such shallow coastal areas are precisely the type of areas in which future wind parks are planned. Two general approaches were adopted for the investigation: the before-after-control-impact design (BACI) and After studies conducted around the wind park. The aim of the BACI studies was to compare bird abundance and distribution before and after the construction of the wind park and between the area presumably affected by the development and a control area. This was carried out on three spatial scales: (i) conducting aerial surveys in two large zones (about 5,000 ha), Tunoe Knob and Ringebjerg Sand, while controlling the total number of birds in Aarhus Bay (88,000 ha), (ii) conducting ground surveys of two areas of about 700-800 ha coverage at Tunoe Knob and Ringebjerg Sand, using the latter as a control area and (iii) within Tunoe using three sub areas (160-250 ha) as controls compared to the construction area. The after experiments were conducted around the wind park with the aim of controlling the confounding effect of food supply and to establish (a) the short-term possible effects of noise and rotor movements generated by the turbines on the distribution and abundance of sea ducks and (b) the long-term scaring effect of the wind park (the impact of revolving rotors and the presence of the standing towers). Finally, an

Getting the oil to the shore

Energy Technology Data Exchange (ETDEWEB)

Menin, J.A.; Meuter, P.

2006-03-15

Conveying highly corrosive fluids - hot water dissolved in salt and sulfide - is just one aspect of getting oil from the field to the shore. Brazilian oil company Petrobras had a requirement for high pressure pumps that could handle high viscosity fluids at its Campos off-shore oil field and be easily maintained. Joao Alberto Menin, Paul Meuter explains how Sulzer Pumps rose to the challenge. (author)

Design and optimization of air bottoming cycles for waste heat recovery in off-shore platforms

International Nuclear Information System (INIS)

Pierobon, Leonardo; Haglind, Fredrik

2014-01-01

Highlights: • Theory of power maximization used to design an air bottoming cycle. • Theory of power maximization extended by a multi-objective optimization method. • Three objective functions considered: net power output, recuperator volume and net present value. • Comparison between the theory of power maximization and the multi-objective optimization method. • Case study: a methodology applied to recover exhaust heat on off-shore platforms. - Abstract: This paper aims at comparing two methodologies to design an air bottoming cycle recovering the waste heat from the power generation system on the Draugen off-shore oil and gas platform. Firstly, the design is determined using the theory of the power maximization. Subsequently, the multi-objective optimization approach is employed to maximize the economic revenue, the compactness and the power production of the air bottoming cycle. The system compactness is assessed by introducing a detailed model of the shell and tube recuperator and including geometric quantities in the set of optimization variables. Findings indicate that using the power production, the volume of the recuperator and the net present value as objective functions the optimal pressure ratio (2.52) and the exhaust gas temperature (178.8 °C) differ from the values (2.80 and 145.5 °C) calculated using the theory of the power maximization. The highest net present value (2.8 M$) is found for a volume of the recuperator of 128 m 3 . Thus, it can be concluded that the multi-objective optimization approach enables extending the theory of power maximization bridging the gap between a mere optimization of the thermodynamic cycle and the practical feasibility of a power generation system

Artificial marine habitats favour a single fish species on a long-term scale: the dominance of Boops boops around off-shore fish cages

Directory of Open Access Journals (Sweden)

Rodrigo Riera

2014-12-01

Full Text Available Off-shore fish cages are new artificial habitats that can affect pelagic fish assemblages and constitute an important food source for wild fish assemblages. This aggregation has noticeable ecological consequences in cage areas in impoverished ecosystems such as those in the Canary archipelago (NE Atlantic Ocean. However, this new habitat could be dominated by a single species, reducing its positive ecological effects. Wild fish assemblages associated with an off-shore fish lease on the northeastern coast of Tenerife (Canary Islands were sampled for six years. Fish assemblage structure beneath fish cages and at controls ( > 500 m from cages differed significantly between locations, with 13 times greater abundance at cage locations. These differences were mainly explained by the dominance of bogue (Boops boops around fish cages. This trend was consistent in the long-term throughout the study period (2004-2009, affecting local fisheries. The presence of fish cages significantly altered wild fish assemblages in the study area, enhancing mainly biomass and abundance of one species, bogue, and causing shifts in species composition.

Run-off from roofing materials

International Nuclear Information System (INIS)

Roed, J.

1985-01-01

In order to find the runn-off from roof material, a roof has been constructed with two different slopes (30 deg. and 45 deg.). 7 Be and 137 Cs have been used as tracers. Considering new roof material, the pollution removed by run-off processes has been shown to be very different for various roof materials. The pollution is much more easily removed from silicon-treated material than from porous red-tile roof material. Cesium is removed more easily than beryllium. The content of cesium in old roof materials is greater in red-tile than in other less porous roof materials. However, the measured removal from new material does not correspond to the amount accumulated in the old. This could be explained by weathering and by saturation effects. The last effect is probably the more important. The measurements on old material indicate a removal of 44-86% of cesium pollution by run-off, whereas the measurement on new material showed a removal of only 31-50%. It has been demonstrated that the pollution concentration in run-off water could be very different from that in rainwater

Concept development for an environmental impact assessment for off-shore wind parks in the Baltic States. Project November 2007 - October 2009. Final report. Advisory assistance programme for environmental protection in the countries of Central and Eastern Europe, the Caucasus and Central Asia

Energy Technology Data Exchange (ETDEWEB)

Fammler, Heidrun; Kuris, Merle [Baltic Environmental Forum, Riga (Latvia)

2010-12-15

This is the final report of the project ''Concept development for an environmental impact assessment for off-shore wind parks in the Baltic States'', which was co-funded by the German Environmental Agency (project No 380 01 173). The main outcomes of the project are: - The ''Guidelines for the investigation of the impacts of offshore wind farms on the marine environment in the Baltic States'' developed by the Baltic Environmental Forum and German consultant Dr. Jan Kube in consultation with experts from Estonia, Latvia and Lithuania. The guidelines give an overview on potential negative impacts of offshore wind farms on the marine environment and general EIA and monitoring requirements as well as give detailed guidance on methodology for relevant field investigations. - The background paper ''Legal frame for the use of offshore wind energy in Germany'' prepared by RA'in Dr. Ursula Prall (April 2009) - 3 international workshops on different aspects related to establishment of offshore wind farms and assessment of their environmental impacts. (orig.)

Power-hardware-in-the-loop test of VSC-HVDC connection for off-shore wind power plants

Energy Technology Data Exchange (ETDEWEB)

Sharma, Ranjan [Siemens Wind Power A/S, Brande (Denmark); Technical Univ. of Denmark (Denmark). Center for Electric Technology; Cha, Seung T.; Wu, Qiuwei; Rasmussen, Tonny W.; Oestergaard, Jacob [Technical Univ. of Denmark (Denmark). Center for Electric Technology; Jensen, Kim H. [Siemens Wind Power A/S, Brande (Denmark)

2011-07-01

This paper present a power-hardware-in-the-loop (PHIL) test of an off-shore wind power plant (WPP) interconnected to the on-shore grid via a VSC-HVDC connection. The intention of the PHIL test is to verify the hardware interaction and the control co-ordination between the plant side VSC of the HVDC system and the wind turbines within the WPP in order to ensure smooth operation of the WPP under both normal and fault operating condition. The PHIL test platform is comprised of a real time digital simulator (RTDS), a Spitzenberger Spies three phase 7,5 kW power amplifier, a purpose built VSC and a DC chopper. The WPP is simulated in the RTDS as a single full-scale wind turbine. The simulated WPP interacts with the WPP side VSC through the power amplifier. The interface between the RTDS and the power amplifier is done via an analogue GTAO I/O card of the RTDS and the input channel of the amplifier. The amplifier scales up the voltages at the point of connection of the WPP in the RTDS to the voltage level for the WPP side VSC. The WPP side VSC converter is equipped with a DC chopper. The test results show the successful control coordination between the WPP and the plant side VSC converter of the HVDC connection of the WPP. (orig.)

Tidal Energy System for On-Shore Power Generation

Energy Technology Data Exchange (ETDEWEB)

Bruce, Allan J

2012-06-26

Addressing the urgent need to develop LCOE competitive renewable energy solutions for US energy security and to replace fossil-fuel generation with the associated benefits to environment impacts including a reduction in CO2 emissions, this Project focused on the advantages of using hydraulic energy transfer (HET) in large-scale Marine Hydrokinetic (MHK) systems for harvesting off-shore tidal energy in US waters. A recent DOE resource assessment, identifies water power resources have a potential to meet 15% of the US electric supply by 2030, with MHK technologies being a major component. The work covered a TRL-4 laboratory proof-in-concept demonstration plus modeling of a 15MW full scale system based on an approach patented by NASA-JPL, in which submerged high-ratio gearboxes and electrical generators in conventional MHK turbine systems are replaced by a submerged hydraulic radial pump coupled to on-shore hydraulic motors driving a generator. The advantages are; first, the mean-time-between-failure (MTBF), or maintenance, can be extended from approximately 1 to 5 years and second, the range of tidal flow speeds which can be efficiently harvested can be extended beyond that of a conventional submerged generator. The approach uses scalable, commercial-off-the-shelf (COTS) components, facilitating scale-up and commercialization. All the objectives of the Project have been successfully met (1) A TRL4 system was designed, constructed and tested. It simulates a tidal energy turbine, with a 2-m diameter blade in up to a 2.9 m/sec flow. The system consists of a drive motor assembly providing appropriate torque and RPM, attached to a radial piston pump. The pump circulates pressurized, environmentally-friendly, HEES hydraulic fluid in a closed loop to an axial piston motor which drives an electrical generator, with a resistive load. The performance of the components, subsystems and system were evaluated during simulated tidal cycles. The pump is contained in a tank for

Project management of the build of the shore test facility for the prototype of PWR II

International Nuclear Information System (INIS)

Clarkson, D.T.

1987-01-01

The PWR II is a new design of nuclear steam raising plant for the Royal Navy's submarines. It features improved engineering for safety, increased power, increased shock resistance, reduced noise transmission to sea and reduced manning requirement. It is to be tested in a new prototype testing facility, the Shore Test Facility, which is a section of submarine hull containing a prototype of the nuclear steam raising plant and its support system. It is installed at the Vulcan Naval Reactor Test establishment at Dounreay in Scotland. The function of the establishment is to test new designs of core and reactor plant, validate the mathematical models used in their design, develop improved methods of operation and maintenance of the plant and test new items of equipment. The Shore Test Facility was built in large sections at Barrow-in-Furness and transported to Scotland. The project management for the construction of the Shore Test Facility is explained. It involves personnel from the Royal Navy, and a large number of people working for the contractors involved in the buildings, transportation, operation and maintenance of the Facility. (U.K.)

Horizontal Directional Drilling (HDD) for shore approach applications

Energy Technology Data Exchange (ETDEWEB)

Smith, Neil [MGI do Brasil Ltda., Rio de Janeiro, RJ (Brazil)

2003-07-01

Horizontal directional drilling (HDD) has become a commonly used construction method for pipeline shore approaches. HDD can mitigate environmental impact, provide greater burial depths and minimize construction schedules. The risks that are associated with HDD river crossings, which are generally well recognized, also apply to HDD shore approaches where they are combined with specific risks occurring from working in the marine environment. The shore approach projects of The Bronx and Hunts Point provide good practical examples of the benefits of this technology in spite of the various challenges encountered. (author)

MODIFIED KACHUGIN METHOD OF ALTERNATIVE SOFTWARE-BASED PROJECTION OF THE PATTERN OF REORGANIZATION OF ABRASION SHORES OF WATER RESERVOIRS IN THE FLAT TERRAIN

Directory of Open Access Journals (Sweden)

Sobol' Il'ya Stanislavovich

2012-10-01

Full Text Available Presently, effective regulations employed in the Russian Federation recommend the use of the methods developed by E.G. Kachuchin, G.S. Zolotarev, I.A. Pecherkin, etc. for the projection of patterns of reorganization of coastlines of water reservoirs. One of these methods, developed by E.G. Kachugin, belongs to the group of power methods based on the hypothesis that the amplitudes of destruction of the coast are proportionate to the total wave energy alongside the coastline. The Kachugin method was reworked into a computer-based two-dimensional engineering model of reorganization of the abrasion shore. The model generates alternative projections. It simulates the processes of washout and accumulation of soil in the coastal area and solves the problem of predicting the potential profile of the shore within a pre-set time period or until the abrasion is smoothed away in the course of formation of coastal shallows. The model testing has proven its efficiency in solving the engineering problems of projecting the line of reservoir abrasion shores with a high degree of reliability.

Coastal and nearshore circulation off Mangalore

Digital Repository Service at National Institute of Oceanography (India)

Gouveia, A.D.; Varadachari, V.V.R.

Studies on currents off Mangalore (west coast of India) showed a strong tidal influence very near the shore which decreased with increasing distance from the shore. At 2 km and further offshore, the onshore component of the current was mostly absent...

Shallow Off-Shore Archaeological Prospection with 3-D Electrical Resistivity Tomography: The Case of Olous (Modern Elounda, Greece

Directory of Open Access Journals (Sweden)

Kleanthis Simyrdanis

2016-10-01

Full Text Available It is well known that nowadays as well as in the past the vast majority of human habitation and activities are mainly concentrated in littoral areas. Thus the increased attention to coastal zone management contributed to the development and implementation of shallow-water mapping approaches for capturing current environmental conditions. During the last decade, geophysical imaging techniques like electrical resistivity tomography (ERT have been used in mapping onshore buried antiquities in a non-destructive manner, contributing to cultural heritage management. Despite its increased implementation in mapping on-shore buried archaeological remains, ERT has minimal to non-existent employment for the understanding of the past dynamics in littoral and shallow off-shore marine environments. This work presents the results of an extensive ERT survey in investigating part of the Hellenistic to Byzantine submerged archaeological site of Olous, located on the north-eastern coast of Crete, Greece. A marine area of 7100 m2 was covered with 178 densely spaced ERT lines having a cumulative length of 8.3 km. A combination of submerged static and moving survey modes were used to document potential buried and submerged structures. The acquired data from the marine environment were processed with two-dimensional and three-dimensional inversion algorithms. A real time kinematic global navigation satellite system was used to map the visible submerged walls and compile the bathymetry model of the bay. The adaptation of ERT in reconstructing the underwater archaeological remains in a shallow marine environment presented specific methodological and processing challenges. The in situ experience from the archaeological site of Olous showed that ERT provided a robust method for mapping the submerged archaeological structures related to the ancient built environment (walls, buildings, roads, signifying at the same time the vertical stratigraphy of the submerged sediments

Shore line displacement in Oeregrundsgrepen

International Nuclear Information System (INIS)

Brydsten, Lars

1999-12-01

This report is a part of the SKB project 'SAFE' (Safety Assessment of the Final Repository of Radioactive Operational Waste). The aim of project SAFE is to update the previous safety analysis of SFR-1. The analysis is to be presented to the Swedish authorities not later than the end of 2000. SFR-1 is a facility for disposal of low and intermediate level radioactive waste and is situated in bedrock beneath the Baltic Sea, 1 km off the coast near the Forsmark nuclear power plant in Northern Uppland. The shore displacement in the Oeregrundsgrepen area is at present approximately 60 cm per 100 years and is slowly decreasing, but will still be substantial for many thousands of years. Since Oeregrundsgrepen is a relatively shallow part of the Bothnian Sea, the positive shore displacement will greatly effect the proportions of land and sea in the future. Within 2000 years (4000 AD) half of the current water area in Oeregrundsgrepen will be land and the water volume will be decreased with two thirds. At 7000 AD, the whole Oeregrundsgrepen area will be without brackish water. The effects on the landscape evolution due to shore displacement in the Oeregrundsgrepen area are illustrated in a chronological series of digital maps in Power Point format available saved on the supplied CD-rom and entitled 'Elevation.ppt '. The bedrock tectonics in the area are in two dominating directions: one northern that can be seen in the west shoreline of the island Graesoe and one in a north-westerly direction seen in the shoreline of the mainland. Many of the large basins that will be established in the area due to the shore displacement will be elongated in one of these directions. Some of the basins are relatively shallow and therefore probably will be totally filled with organic rich sediments and will form peat or bogs. Other basins, especially Graesoeraennan (the deep channel on the west side of Graesoe) are deep basins and will form a long chain of deep lakes. One of the deeper basins

Shore line displacement in Oeregrundsgrepen

Energy Technology Data Exchange (ETDEWEB)

Brydsten, Lars [Umeaa Univ. (Sweden). Dept. of Ecology and Environmental Science

1999-12-15

This report is a part of the SKB project 'SAFE' (Safety Assessment of the Final Repository of Radioactive Operational Waste). The aim of project SAFE is to update the previous safety analysis of SFR-1. The analysis is to be presented to the Swedish authorities not later than the end of 2000. SFR-1 is a facility for disposal of low and intermediate level radioactive waste and is situated in bedrock beneath the Baltic Sea, 1 km off the coast near the Forsmark nuclear power plant in Northern Uppland. The shore displacement in the Oeregrundsgrepen area is at present approximately 60 cm per 100 years and is slowly decreasing, but will still be substantial for many thousands of years. Since Oeregrundsgrepen is a relatively shallow part of the Bothnian Sea, the positive shore displacement will greatly effect the proportions of land and sea in the future. Within 2000 years (4000 AD) half of the current water area in Oeregrundsgrepen will be land and the water volume will be decreased with two thirds. At 7000 AD, the whole Oeregrundsgrepen area will be without brackish water. The effects on the landscape evolution due to shore displacement in the Oeregrundsgrepen area are illustrated in a chronological series of digital maps in Power Point format available saved on the supplied CD-rom and entitled 'Elevation.ppt '. The bedrock tectonics in the area are in two dominating directions: one northern that can be seen in the west shoreline of the island Graesoe and one in a north-westerly direction seen in the shoreline of the mainland. Many of the large basins that will be established in the area due to the shore displacement will be elongated in one of these directions. Some of the basins are relatively shallow and therefore probably will be totally filled with organic rich sediments and will form peat or bogs. Other basins, especially Graesoeraennan (the deep channel on the west side of Graesoe) are deep basins and will form a long chain of deep lakes. One

Sound Propagation Around Off-Shore Wind Turbines. Long-Range Parabolic Equation Calculations for Baltic Sea Conditions

Energy Technology Data Exchange (ETDEWEB)

Johansson, Lisa

2003-07-01

Low-frequency, long-range sound propagation over a sea surface has been calculated using a wide-angel Cranck-Nicholson Parabolic Equation method. The model is developed to investigate noise from off-shore wind turbines. The calculations are made using normal meteorological conditions of the Baltic Sea. Special consideration has been made to a wind phenomenon called low level jet with strong winds on rather low altitude. The effects of water waves on sound propagation have been incorporated in the ground boundary condition using a boss model. This way of including roughness in sound propagation models is valid for water wave heights that are small compared to the wave length of the sound. Nevertheless, since only low frequency sound is considered, waves up to the mean wave height of the Baltic Sea can be included in this manner. The calculation model has been tested against benchmark cases and agrees well with measurements. The calculations show that channelling of sound occurs at downwind conditions and that the sound propagation tends towards cylindrical spreading. The effects of the water waves are found to be fairly small.

Off-Shore wind potential estimation along the coast of Chile by using scatterometer and Reanalysis data

Directory of Open Access Journals (Sweden)

C. Mattar

2014-06-01

Full Text Available This work presents the first offshore wind potential estimation over the coast of Chile using long term data series from “QuikSCAT (V04 wind vectors” and ERA-interim’s wind product between 1999-2009 and 1979-2012, respectively. Weibull and Rayleigh’s distribution were used to adjust the data series from the study period to find the probability density function, mean wind speed, maximum and minimum from each data series adjusted per pixel. Power generation and a capacity factor were estimated for the whole scene using three wind turbine models corresponding to 3.6, 5.0 and 8.0 MW. The images obtained from the data processing were grouped into three different wind power zones named (A located up north, (B in the center and (C down south-center. The mean capacity factors are higher than 20%, moreover B and C areas have an average of 36%. This work shows the high wind power potential to generate electricity by using wind off-shore technologies along the coast of Chile.

Managing trade-offs in landscape restoration and revegetation projects.

Science.gov (United States)

Maron, Martine; Cockfield, Geoff

2008-12-01

Landscape restoration projects often have multiple and disparate conservation, resource enhancement, and sometimes economic objectives, since projects that seek to meet more than one objective tend to be viewed more positively by funding agencies and the community. The degree to which there are trade-offs among desired objectives is an important variable for decision makers, yet this is rarely explicitly considered. In particular, the existence of ecological thresholds has important implications for decision-making at both the project level and the regional level. We develop a model of the possibilities and choices for an agency seeking to achieve two environmental objectives in a region through revegetation of a number of sites. A graphical model of the production possibilities sets for a single revegetation project is developed, and different trade-off relationships are discussed and illustrated. Then the model is used to demonstrate the possibilities for managing all such projects within a region. We show that, where there are thresholds in the trade-off relationship between two objectives, specialization (single- or dominant-objective projects) should be considered. This is illustrated using a case study in which revegetation is used to meet avian biodiversity and salinity mitigation objectives. We conclude that where there are sufficient scientific data, explicit consideration of different types of trade-offs can assist in making decisions about the most efficient mix and type of projects to better achieve a range of objectives within a region.

Adjustment of Part Properties for an Elastomeric Laser Sintering Material

Science.gov (United States)

Wegner, A.; Ünlü, T.

2018-03-01

Laser sintering of polymers is gaining more and more importance within the field of small series productions. Polyamide 12 is predominantly used, although a variety of other materials are also available for the laser sintering process. For example, elastomeric, rubberlike materials offer very different part property profiles. Those make the production of flexible parts like, e.g., sealings, flexible tubes or shoe soles possible because they offer high part ductility and low hardness. At the chair for manufacturing technology, a new elastomeric laser sintering material has been developed and then commercialized by a spin-off from university. The aim of the presented study was the analysis of the new material's properties. Proof was found that Shore hardness can be modified by varying the parameter settings. Therefore, the correlation between process parameters, energy input, Shore hardness and other part properties like mechanical properties were analyzed. Based on these results, suitable parameter settings were established which lead to the possibility of producing parts with different Shore hardnesses.

Metodologie innovative per il supporto alla progettazione e all’analisi delle prestazioni di impianti ad energia solare a concentrazione ed eolici off-shore utilizzando immagini satellitari ottiche e SAR

OpenAIRE

Morelli, Marco; Masini, Andrea; Alberto, Marco; Potenza, Marco Alberto Carlo

2014-01-01

In questo lavoro presentiamo delle nuove metodologie, sviluppate nell’ambito del progetto SATENERG (Servizi sATellitari per le ENergie Rinnovabili di nuova Generazione) finanziato dall’Agenzia Spaziale Italiana, sia per il supporto alla progettazione/pianificazione che per il monitoraggio quasi in tempo reale e l’analisi delle prestazioni degli impianti ad energia rinnovabile di nuova generazione (CSP, CPV ed eolici off-shore) utilizzando immagini satellitari. In particolare pe...

Cruise tourism shore excursions

DEFF Research Database (Denmark)

João Lopes, Maria; Dredge, Dianne

2018-01-01

Very complex yet highly integrated business logics characterise cruise tourism with shore excursions frequently identified as a key source of value. This paper presents a case study of cruise tourism and shore excursion planning in Copenhagen, Denmark. The aim of this paper is to investigate...... the characteristics of cruise tourism, itinerary and shore excursion planning with a view to understanding the value generated from cruise tourism shore excursions. We argue that economic value is a blunt measure, and there are other types of value, positive and negative, that are also generated. This research...... reveals that a range of local conditions and structural characteristics create barriers and opportunities for generating different types of value. Using a case study of shore excursions in Copenhagen, the Baltic’s most important port, this paper explains the dynamics between cruise tourism and shore...

The RUNE Experiment—A Database of Remote-Sensing Observations of Near-Shore Winds

DEFF Research Database (Denmark)

Floors, Rogier Ralph; Peña, Alfredo; Lea, Guillaume

2016-01-01

We present a comprehensive database of near-shore wind observations that were carried out during the experimental campaign of the RUNE project. RUNE aims at reducing the uncertainty of the near-shore wind resource estimates from model outputs by using lidar, ocean, and satellite observations. Here...

On-Shore Pipeline Emergency Repair Center; Centro de Reparos Emergenciais de Dutos Terrestres

Energy Technology Data Exchange (ETDEWEB)

Souza Filho, Byron Goncalves de [TRANSPETRO - PETROBRAS Transportes, Rio de Janeiro, RJ (Brazil)

2003-07-01

After the accidents happened on years 2000 and 2001, in TRANSPETRO's operated pipelines, appeared a common conscientiousness about the necessity for the creation of a basic infrastructure for emergency and contingency pipeline repair that centralize equipment, procedures and technologies applied to pipeline maintenance. Then, it was planned the creation of the On-Shore Pipeline Emergency Center (CRE-DUT), following the model of the Off-Shore Pipelines Repair Group from PETROBRAS/EP, (Exploration and Production) and other similar centers of pipeline transport companies worldwide (Canada, Colombia, Mexico, Argentina). The CRE-DUT has the Mission of offering contingency; emergency and specials on-shore pipelines repair services, with safety, quality and at the less possible time, seeking for the leadership on applying new technologies and the excellency in repair activities. (author)

Report on the wind power development field test project in the off-shore park in Daitocho Town in fiscal 1997. System design; 1997 nendo Daitocho kaiyo koen nado ni okeru furyoku kaihatsu field test jigyo hokokusho. System sekkei

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

This paper reports the wind power development field test project in the off-shore park in Daitocho Town in Shizuoka Prefecture. The annual average wind velocity was 4.2 m/s (at height of 20 m above the ground), where the facility utilization rates for 300 and 500 kW class plants were 15.1 and 16.7%, respectively. Both of the annual average wind velocity and the facility utilization rate do not meet the criteria established by NEDO. Although the location is adjacent to the Natural Park, there is no restricting condition for installation. The substation to which system linkage is to be performed is the Daito substation 3 km north of the planned location. The major load is the Daito Spa in the park facility. Ground bed at depth of 5 m will be used as the windmill foundation supporting bed. There is little electromagnetic wave hazard. The location is 380 m away from the nearest residential house, presenting no windmill noise problem. The amount of power to be generated was assumed 281,000 kWh. Specifications for nine models of 300-kW class windmills that can be introduced into Japan were discussed to select a model. The project cost was calculated to be 128.5 million yen. The construction cost will be 428,000 yen and the power generation cost 38.1 yen/kWh. Its economy is poor when the current unit price for surplus power purchase is considered, but the effect of enlightenment may be expected. (NEDO)

Bacteriological studies off Mangalore coast

Digital Repository Service at National Institute of Oceanography (India)

Nair, S.; LokaBharathi, P.A.

Bacteriological studies of sediment and water in the near shore region off Mangalore showed that both limnotolerant and halotolerant bacteria were present. Significant inter-correlation (quantitative and qualitative) could be noted between various...

The need for integrated off-shore, real-time information and management systems

Energy Technology Data Exchange (ETDEWEB)

Morley, L W

1981-07-01

Integrated planning, in which data from ships, aircraft, data buoys, and shore or satellite-borne radar are used for ocean surveillance is urged. The Atlantic coast of Canada is used as an example of the inefficiency of current management methods. Traffic control, search and rescue missions, pollution control, weather forecasting, and fisheries management are directed by separate government agencies, each with its own information system. A coordinated approach would reduce waste and allow full advantage to be taken of technological developments, e.g., satellites, unknown when the agencies were created.

Oceanic Storm Characteristics off the Kennedy Space Center Coast

Science.gov (United States)

Wilson, J. G.; Simpson, A. A.; Cummins, K. L.; Kiriazes, J. J.; Brown, R. G.; Mata, C. T.

2014-01-01

Natural cloud-to-ground lightning may behave differently depending on the characteristics of the attachment mediums, including the peak current (inferred from radiation fields) and the number of ground strike locations per flash. Existing literature has raised questions over the years on these characteristics of lightning over oceans, and the behaviors are not yet well understood. To investigate this we will obtain identical electric field observations over adjacent land and ocean regions during both clear air and thunderstorm periods. Oceanic observations will be obtained using a 3-meter NOAA buoy that has been instrumented with a Campbell Scientific electric field mill and New Mexico Techs slow antenna, to measure the electric fields aloft. We are currently obtaining measurements from this system on-shore at the Florida coast, to calibrate and better understand the behavior of the system in elevated-field environments. Sometime during winter 2013, this system will be moored 20NM off the coast of the Kennedy Space Center. Measurements from this system will be compared to the existing on-shore electric field mill suite of 31 sensors and a coastal slow antenna. Supporting observations will be provided by New Mexico Techs Lightning Mapping Array, the Eastern Range Cloud to Ground Lightning Surveillance System, and the National Lightning Detection Network. An existing network of high-speed cameras will be used to capture cloud-to-ground lightning strikes over the terrain regions to identify a valid data set for analysis. This on-going project will demonstrate the value of off-shore electric field measurements for safety-related decision making at KSC, and may improve our understanding of relative lightning risk to objects on the ground vs. ocean. This presentation will provide an overview of this new instrumentation, and a summary of our progress to date.

Impact of mining on suspended materials in the Mandovi and Zuari ...

Indian Academy of Sciences (India)

At the regular station -- SPM is controlled by River run off, resuspension and interaction of freshwater- seawater. -- SPM at high salinity is mixture of land- derived (kaolinite) and resuspended (smectite) material. -- High Fe, Mn and Co in SPM are derived from the leaching of Fe-Mn ores heaped along the shore during heavy ...

Environmental data for the planning of off-shore wind parks from the EnerGEO Platform of Integrated Assessment (PIA)

Energy Technology Data Exchange (ETDEWEB)

Zelle, Hein; Mika, Agnes; Calkoen, Charles; Santbergen, Peter [BMT ARGOSS, Marknesse (Netherlands); Blanc, Isabelle; Guermont, Catherine; Menard, Lionel; Gschwind, Benoit [MINES ParisTech, Sophia Antipolis (France)

2013-07-01

The EU-sponsored EnerGEO project aims at providing decision makers with a modelling platform to assess the environmental impacts of different sources of renewable energy. One of the pillars of the project is the Wind Energy Pilot, addressing the effects of offshore wind parks on air pollution and energy use. The methods used in the pilot and the underlying environmental databases are integrated into a WebGIS client tool and made available to the public. This paper is dedicated to describing the environmental databases and supporting data incorporated in the client tool. A 27-km resolution, 11-year wind database is created using the WRF model. The wind database is used to assess the wind climate in the north-west Atlantic region and to derive the potential power output from offshore wind parks. Auxiliary data concerning water depth, distance to shore and distance to the nearest suitable port are created to aid the planning and maintenance phases. Seasonal workability conditions are assessed using a 20-year wave database. The distance at which future wind parks should be placed to exhibit different wind climates is investigated. (orig.)

Environmental data for the planning of off-shore wind parks from the EnerGEO Platform of Integrated Assessment (PIA)

International Nuclear Information System (INIS)

Zelle, Hein; Mika, Agnes; Calkoen, Charles; Santbergen, Peter; Blanc, Isabelle; Guermont, Catherine; Menard, Lionel; Gschwind, Benoit

2013-01-01

The EU-sponsored EnerGEO project aims at providing decision makers with a modelling platform to assess the environmental impacts of different sources of renewable energy. One of the pillars of the project is the Wind Energy Pilot, addressing the effects of offshore wind parks on air pollution and energy use. The methods used in the pilot and the underlying environmental databases are integrated into a WebGIS client tool and made available to the public. This paper is dedicated to describing the environmental databases and supporting data incorporated in the client tool. A 27-km resolution, 11-year wind database is created using the WRF model. The wind database is used to assess the wind climate in the north-west Atlantic region and to derive the potential power output from offshore wind parks. Auxiliary data concerning water depth, distance to shore and distance to the nearest suitable port are created to aid the planning and maintenance phases. Seasonal workability conditions are assessed using a 20-year wave database. The distance at which future wind parks should be placed to exhibit different wind climates is investigated. (orig.)

Satellite SAR wind resource mapping in China (SAR-China)

DEFF Research Database (Denmark)

Badger, Merete

The project ‘Off-Shore Wind Energy Resource Assessment and Feasibility Study of Off-Shore Wind Farm Development in China’ is funded by the EU-China Energy and Environment Programme (EEP) and runs for one year (August 2008 - August 2009). The project is lead by the China Meteorological Administrat...

46 CFR 129.390 - Shore power.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Shore power. 129.390 Section 129.390 Shipping COAST... Power Sources and Distribution Systems § 129.390 Shore power. Each vessel that has an electrical system operating at more than 50 volts and has provisions for receiving shore power must meet the requirements of...

46 CFR 183.390 - Shore power.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Shore power. 183.390 Section 183.390 Shipping COAST...) ELECTRICAL INSTALLATION Power Sources and Distribution Systems § 183.390 Shore power. A vessel with an electrical system operating at more than 50 volts, which is provided with a means to connect to shore power...

Canopy interactions of rainfall in an off-shore mangrove ecosystem dominated by Rhizophora mangle (Belize)

Science.gov (United States)

Wanek, Wolfgang; Hofmann, Julia; Feller, Ilka C.

2007-10-01

SummaryBulk precipitation, throughfall and stemflow were collected to study anthropogenic effects on above-ground nutrient cycling in an off-shore mangrove forest ( Rhizophora mangle L.) on Twin Cays, Belize. Samples were collected in a nitrogen limited fringe and phosphorus limited dwarf zone, and from an adjacent nitrogen fertilized fringe and a phosphorus fertilized dwarf zone. Inorganic cations and anions, dissolved organic carbon (DOC) and nitrogen (DON) were analysed. Throughfall represented 84% of precipitation volume. Sea salt ions (Cl -, Na +, SO42- and Mg 2+) and DOC accounted for the highest proportion of solutes in rainwater, throughfall and stemflow in R. mangle stands. Non-marine sources dominated the flux of DON, DOC, NO3-, NH4+, and inorganic P (P i) in bulk precipitation and throughfall and partially contributed to Ca 2+ and K +. Deposition ratios (throughfall deposition:bulk deposition) showed that inorganic NH4+, and less so P i were retained in the canopy of R. mangle from throughfall while all other solutes increased. Canopy leaching contributed in increasing order to net throughfall of Ca 2+, Cl -, SO42-/K, Mg 2+ and Na + but dry deposition dominated the net throughfall flux during the investigated period. Fertilizer treatment and zone did only slightly affect solute concentrations of hot-water extracts of leaves, of throughfall and stemflow in stands of similar stature. While litterfall and primary production have previously been shown to increase substantially upon nutrient enrichment of mangroves we therefore conclude that fertilization, as a surrogate of anthropogenic eutrophication, may not increase nutrient leaching from mangrove canopies, and thus may only have a minor effect on soluble organic matter cycling and inputs into mangrove food webs.

Wave refraction studies off Agonda beach (Goa)

Digital Repository Service at National Institute of Oceanography (India)

Krishnakumar, V.; Pathak, M.C.; Kotnala, K.L.

Analysis of wave refraction and longshore current has been carried out for a narrow strip off the shores of Agonda (Goa, India). Zones with high wave energy and rip currents have been demarcated. It is found from the analysis that the southern part...

Specifications for offshore pipeline - an analysis of installers needs versus manufacturers capabilities; Especificacoes para tubulacoes off-shore - uma analise das necessidades do instalador versus capacidade dos fabricantes

Energy Technology Data Exchange (ETDEWEB)

Fernandes, Mauricio; Godoy, Mauricio; Ferreira; Sergio; Kojima, Sergio

2003-07-01

The development of off-shore gas fields on the last years led to a sophistication on the methods of laying the pipes. This consequently led to specifications more and more stringent on the characteristics of the pipes that may interfere with the weld in barges or ships, notoriously when using automatic girth welding. The main restrictions are on pipe length, and dimensional characteristics such as: straightness; out of roundness; weld off-set, as well as chemistry. To cope with this trend the pipe mills had to make new developments and investments, and the cost of production of the pipes increased. Considering the real needs of the final customer, we concluded that some requirements are too stringent, leading to a final increase of the final cost of the installed pipeline, as some requirements that apparently save some installation costs, are difficult to be obtained during pipe fabrication, and cause increase on the final cost of it. This paper was made considering UOE/Three bend roll-SAW pipes, diameter 24'' and bigger. (author)

Results from the European Integrated Project '' New Materials for Extreme Environments (ExtreMat) ''

International Nuclear Information System (INIS)

Bolt, H.; Linsmeier, Ch.; Baluc, N.; Garcia-Rosales, G.; Gualco, G. C.; Simancik, F.

2006-01-01

The goal of the European Integrated Project '' ExtreMat '' is to provide and to industrialize new materials and their compounds for applications in extreme environments that are beyond reach with incremental materials development only. The R(and)D activities in this project aim to provide a) self-passivating protection materials for sensitive structures operated in physico-chemically aggressive environments at high temperatures; b) new heat sink materials with the capability of very efficient heat removal, often at very high temperature level; c) radiation resistant materials for very high operation temperatures; d) new processing routes for complex heterogeneous compounds that can be operated in extreme environments. Key applications for these new materials are in the sectors of fusion, advanced fission, space, and electronic applications. Further use of these materials is expected in spin-off fields, such as brake applications and energy conversion. The project started in December 2004 for a duration of five years and is supported by the European Community. The 37 project participants are from 13 EU member states and include 6 universities, 7 research institutes, 10 research centres and 14 industrial companies. Research results regarding the development of materials for application in nuclear fusion, especially on protection, heat sink, and radiation resistant materials will be presented. A view to other applications of these materials in the fields of fission, space and electronics will be given in the presentation. ExtreMat Project Partners: see http://www.extremat.org/. (author)

Supporting PECO countries in combating illicit trafficking of nuclear materials - Status of ongoing projects

International Nuclear Information System (INIS)

Janssens, W.; Daures, P.; Cromboom, O.; Mayer, K.; Koch, L.

2001-01-01

Full text: In order to support the development of an efficient and validated response to counteract illicit trafficking of nuclear materials in the EU, the candidate countries and some CIS countries, ITU is currently executing a series of dedicated projects with the Candidate Countries to the European Union, based upon the experience gained in previous Phare and Tacis projects. Following the recommendations of the International Technical Working Group (ITWG), the objectives of the projects are: assessment of the national situation during a fact-finding mission in the country; technical upgrade and/or training related to the categorisation of nuclear material on the spot and assistance for the identification of seized nuclear material, through joint analysis at ITU; implementation of the recommended Model Action Plan in the form of a national handbook called RITNUM (Response to Illicit Trafficking of NUclear Material); validation of the national Model Action Plan by the organisation of a demonstration exercise in the country involving all the identified services in the field. After a kick-off meeting held in Karlsruhe in November 2000 and attended by two participants of each country, 5 fact-finding missions have been already performed (Romania, Slovenia and the three Baltic States). A general meeting with all the involved parties (Customs, Police, Intelligence services. Health Physics, Nuclear reference laboratory...) was organised to describe the procedure of the integrated response and the national needs were assessed. The corresponding training sessions are planed in January 2002 at ITU for three participants for each country (Customs and Police officer and high level scientist dealing with nuclear measurements). This training session will be organised and supported by IAEA which have a common interest through its Regional Program on Combating Illicit Trafficking (RER60). This joint action will be extended to other eastern countries (ex. Belarus) on IAEA request

Severe impacts of brown tides caused by Sargassum spp. on near-shore Caribbean seagrass communities.

Science.gov (United States)

van Tussenbroek, Brigitta I; Hernández Arana, Héctor A; Rodríguez-Martínez, Rosa E; Espinoza-Avalos, Julio; Canizales-Flores, Hazel M; González-Godoy, Carlos E; Barba-Santos, M Guadalupe; Vega-Zepeda, Alejandro; Collado-Vides, Ligia

2017-09-15

From mid-2014 until the end of 2015, the Mexican Caribbean coast experienced a massive influx of drifting Sargassum spp. that accumulated on the shores, resulting in build-up of decaying beach-cast material and near-shore murky brown waters (Sargassum-brown-tides, Sbt). The effects of Sbt on four near-shore waters included reduction in light, oxygen (hypoxia or anoxia) and pH. The monthly influx of nitrogen, and phosphorus by drifting Sargassum spp. was estimated at 6150 and 61kgkm -1 respectively, resulting in eutrophication. Near-shore seagrass meadows dominated by Thalassia testudinum were replaced by a community dominated by calcareous rhizophytic algae and drifting algae and/or epiphytes, resulting in 61.6-99.5% loss of below-ground biomass. Near-shore corals suffered total or partial mortality. Recovery of affected seagrass meadows may take years or even decades, or changes could be permanent if massive influxes of Sargassum spp. recur. Copyright © 2017. Published by Elsevier Ltd.

The integrated melter off-gas treatment systems at the West Valley Demonstration Project

Energy Technology Data Exchange (ETDEWEB)

Vance, R.F. [West Valley Nuclear Services Co., Inc., NY (United States)

1995-02-01

The West Valley Demonstration Project was established by Public Law 96-368, the {open_quotes}West Valley Demonstration Project Act, {close_quotes} on October 1, l980. Under this act, Congress directed the Department of Energy to carry out a high level radioactive waste management demonstration project at the Western New York Nuclear Service Center in West Valley, New York. The purpose of this project is to demonstrate solidification techniques which can be used for preparing high level radioactive waste for disposal. In addition to developing this technology, the West Valley Demonstration Project Act directs the Department of Energy to: (1) develop containers suitable for permanent disposal of the high level waste; (2) transport the solidified high level waste to a Federal repository; (3) dispose of low level and transuranic waste produced under the project; and (4) decontaminate and decommission the facilities and materials associated with project activities and the storage tanks originally used to store the liquid high level radioactive waste. The process of vitrification will be used to solidify the high level radioactive liquid wastes into borosilicate glass. This report describes the functions, the controlling design criteria, and the resulting design of the melter off-gas treatment systems which are used in the vitrification process.

Maximising the commercial value of wind energy through forecasting

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

The aim of this project, initiated by the DTI, was to advise the electricity industry on the possibility of using weather forecasting to improve the commercial position of both inland and off-shore wind farms under the New Electricity Trading Arrangements (NETA) and to develop appropriate strategies for the use of forecasting. The work has clearly shown that, by using forecasting, wind generators can make money on the Short-Term Power Exchange, increasing their revenue over and above that achieved in the cash-out market. For inland sites, the average annual increased earnings are estimated around 5.8%, rising to 7.5% off-shore. The forecast value methodology developed by the Meteorological Office during the project has proven to be a valuable tool for analysing wind farm trading under NETA. The methodology has the potential to be used by wind farm operators and suppliers wishing to actively trade wind on the Short-Term Power Exchange. It is recommended that further verification of the methodology and development for active use is required. Specifically, a lack of 'true' off-shore wind data has been identified. It appears that off-shore wind farms stand to gain most from forecasting and the report calls for off-shore wind observation data to be made available to allow better verification of the off-shore forecasting models to be undertaken. (author)

Cost optimization of wind turbines for large-scale offshore wind farms

International Nuclear Information System (INIS)

Fuglsang, P.; Thomsen, K.

1998-02-01

This report contains a preliminary investigation of site specific design of off-shore wind turbines for a large off-shore wind farm project at Roedsand that is currently being proposed by ELKRAFT/SEAS. The results were found using a design tool for wind turbines that involve numerical optimization and aeroelastic calculations of response. The wind climate was modeled in detail and a cost function was used to estimate costs from manufacture and installation. Cost of energy is higher for off-shore installations. A comparison of an off-shore wind farm site with a typical stand alone on-shore site showed an increase of the annual production of 28% due to the difference in wind climate. Extreme loads and blade fatigue loads were nearly identical, however,fatigue loads on other main components increased significantly. Optimizations were carried out to find the optimum overall off-shore wind turbine design. A wind turbine for the off-shore wind farm should be different compared with a stand-alone on-shore wind turbine. The overall design changed were increased swept area and rated power combined with reduced rotor speed and tower height. Cost was reduced by 12% for the final 5D/14D off-shore wind turbine from 0.306 DKr/kWh to 0.270 DKr/kWh. These figures include capital costs from manufacture and installation but not on-going costs from maintenance. These results make off-shore wind farms more competitive and comparable to the reference on-shore stand-alone wind turbine. A corresponding reduction of cost of energy could not be found for the stand alone on-shore wind turbine. Furthermore the fatigue loads on wind turbines in on-shore wind farms will increase and cost of energy will increase in favor of off-shore wind farms. (au) EFP-95; EU-JOULE-3; 21 tabs., 7 ills., 8 refs

Shore Shapers: Introducing children and the general public to biogeomorphological processes and geodiversity

Science.gov (United States)

Naylor, Larissa; Coombes, Martin; Sewell, Jack; White, Anissia

2014-05-01

Coastal processes shape the coast into a variety of eye-catching and enticing landforms that attract people to marvel at, relax and enjoy coastal geomorphology. Field guides to explain these processes (and the geodiversity that results) to the general public and children are few and far between. In contrast, there is a relative wealth of resources and organised activities introducing people to coastal wildlife, especially on rocky shores. These biological resources typically focus on the biology and climatic controls on their distribution, rather than how the biology interacts with its physical habitat. As an outcome of two recent rock coast biogeomorphology projects (www.biogeomorph.org/coastal/coastaldefencedbiodiversity and www.biogeomorph.org/coastal/bioprotection ), we produced the first known guide to understanding how biogeomorphological processes help create coastal landforms. The 'Shore Shapers' guide (www.biogeomorph.org/coastal/shoreshapers) is designed to: a) bring biotic-geomorphic interactions to life and b) introduce some of the geomorphological and geological controls on biogeomorphic processes and landform development. The guide provides scientific information in an accessible and interactive way - to help sustain children's interest and extend their learning. We tested a draft version of our guide with children, the general public and volunteers on rocky shore rambles using social science techniques and of 74 respondents, 75.6% were more interested in understanding how rock pools (i.e. coastal landforms) develop after seeing the guide. Respondents' opinions about key bioprotective species also changed as a result of seeing the guide - 58% of people found barnacles unattractive before they saw the guide whilst 36% of respondents were more interested in barnacles after seeing the guide. These results demonstrate that there is considerable interest in more educational materials on coastal biogeomorphology and geodiversity.

46 CFR 120.390 - Shore power.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Shore power. 120.390 Section 120.390 Shipping COAST... PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS ELECTRICAL INSTALLATION Power Sources and Distribution Systems § 120.390 Shore power. A vessel with an electrical system operating at more...

Near shore waves, long-shore currents and sediment transport along micro-tidal beaches, central west coast of India

Digital Repository Service at National Institute of Oceanography (India)

Philip, C.S.; SanilKumar, V.; Dora, G.U.; Johnson, G.

Coastlines are undergoing constant geomorphologic changes with respect to the incident wave climate. Based on waves measured at 9 m water depth, simulation of near shore wave transformation is done using REFDIF-1 numerical model and the near shore...

Research from Afar: Considerations for Conducting an Off-Site Research Project.

Science.gov (United States)

Williams, Reg Arthur; Hagerty, Bonnie M.; Hoyle, Kenneth; Yousha, Steven M.; Abdoo, Yvonne; Andersen, Curt; Engler, Dorothy

1999-01-01

Critical elements in the success of off-site research projects include the following: negotiation, attention to personnel issues, communication, participation of research subjects, data management, and concern for privacy issues. (SK)

Off-gas control project

International Nuclear Information System (INIS)

Torgerson, D.F.; Smith, I.M.

1978-06-01

A program to develop and study off-gas abatement techniques has recently been initiated at Whiteshell Nuclear Research Establishment (WNRE). This report provides information on the properties and expected behaviour of reprocessing plant off-gases, and outlines the experimental program to be undertaken. (author)

76 FR 303 - Pipeline Safety: Safety of On-Shore Hazardous Liquid Pipelines

Science.gov (United States)

2011-01-04

... leak detection requirements for all pipelines; whether to require the installation of emergency flow... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part 195 [Docket ID PHMSA-2010-0229] RIN 2137-AE66 Pipeline Safety: Safety of On-Shore Hazardous Liquid...

The Employment Situation in Selected Communities on the Lower Eastern Shore of Maryland.

Science.gov (United States)

Thaxton, Louis C.; Tuthill, Dean F.

This is an illustrated report on some findings of the Citizens Education Project (CEP), a 1979 survey of the employment situation of communities in five Maryland counties. The study was conducted by the Maryland Cooperative Extension Service, University of Maryland, College Park and Eastern Shore, with funding from Extension Program 1890. The…

A Multi-Objective Trade-Off Model in Sustainable Construction Projects

Directory of Open Access Journals (Sweden)

Guangdong Wu

2017-10-01

Full Text Available Based on the consideration of the relative importance of sustainability-related objectives and the inherent nature of sustainable construction projects, this study proposes that the contractor can balance the levels of efforts and resources used to improve the overall project sustainability. A multi-objective trade-off model using game theory was established and verified through simulation and numerical example under a moral hazard situation. Results indicate that effort levels of the contractor on sustainability-related objectives are positively related to the outcome coefficient while negatively to the coefficients of effort cost of the relevant objectives. High levels of the relative importance of sustainability-related objectives contribute to high levels of effort of the contractor. With the variation in effort levels and the coefficient of benefit allocation, the project net benefit increases before declining. The function of project benefit has a marked peak value, with an inverted “U” shape. An equilibrium always exists as for the given relative importance and coefficients of the effort costs of sustainability-related objectives. Under this condition, the owner may offer the contractor a less intense incentive and motivate the contractor reasonably arranging input resources. The coefficient of benefit allocation is affected by the contractor characteristic factors and the project characteristic factors. The owner should balance these two types of factors and select the most appropriate incentive mechanism to improve the project benefit. Meanwhile, the contractor can balance the relative importance of the objectives and arrange the appropriate levels of effort and resources to achieve a sustainability-related objective. Very few studies have emphasized the effects of the relative importance of sustainability-related objectives on the benefits of sustainable construction projects. This study therefore builds a multi-objective trade-off

Spin-off strategies for the improvement of the performance national nuclear R and D project

International Nuclear Information System (INIS)

Lee, T. J.; Kim, H. J.; Jung, H. S.; Yang, M. H.; Choi, Y. M.

1998-01-01

In the light of the strategic utilization of the national R and D projects, this paper is to induce the spin-off strategies to improve the national R and D effectiveness through analyzing the spin-off characteristics of nuclear technologies, the spin-off status of the advanced countries and the case study of Korean nuclear spin-offs. Spin-off process is viewed as a three-stage operation, such as preparation stage, implementation stage and maintenance stage. In order to find the correlation between the influencing factors and spin-off effectiveness, the Spearman's correlation coefficient was employed as a specific statistical technique. By integrating this correlation, spin-off process and spin-off strategies, this paper presents an efficient frame work to improve the spin-off effectiveness

The psychopharmacology algorithm project at the Harvard South Shore Program: an update on schizophrenia.

Science.gov (United States)

Osser, David N; Roudsari, Mohsen Jalali; Manschreck, Theo

2013-01-01

This article is an update of the algorithm for schizophrenia from the Psychopharmacology Algorithm Project at the Harvard South Shore Program. A literature review was conducted focusing on new data since the last published version (1999-2001). The first-line treatment recommendation for new-onset schizophrenia is with amisulpride, aripiprazole, risperidone, or ziprasidone for four to six weeks. In some settings the trial could be shorter, considering that evidence of clear improvement with antipsychotics usually occurs within the first two weeks. If the trial of the first antipsychotic cannot be completed due to intolerance, try another until one of the four is tolerated and given an adequate trial. There should be evidence of bioavailability. If the response to this adequate trial is unsatisfactory, try a second monotherapy. If the response to this second adequate trial is also unsatisfactory, and if at least one of the first two trials was with risperidone, olanzapine, or a first-generation (typical) antipsychotic, then clozapine is recommended for the third trial. If neither trial was with any these three options, a third trial prior to clozapine should occur, using one of those three. If the response to monotherapy with clozapine (with dose adjusted by using plasma levels) is unsatisfactory, consider adding risperidone, lamotrigine, or ECT. Beyond that point, there is little solid evidence to support further psychopharmacological treatment choices, though we do review possible options.

Circumstellar Material on and off the Main Sequence

Science.gov (United States)

Steele, Amy; Debes, John H.; Deming, Drake

2017-06-01

There is evidence of circumstellar material around main sequence, giant, and white dwarf stars that originates from the small-body population of planetary systems. These bodies tell us something about the chemistry and evolution of protoplanetary disks and the planetary systems they form. What happens to this material as its host star evolves off the main sequence, and how does that inform our understanding of the typical chemistry of rocky bodies in planetary systems? In this talk, I will discuss the composition(s) of circumstellar material on and off the main sequence to begin to answer the question, “Is Earth normal?” In particular, I look at three types of debris disks to understand the typical chemistry of planetary systems—young debris disks, debris disks around giant stars, and dust around white dwarfs. I will review the current understanding on how to infer dust composition for each class of disk, and present new work on constraining dust composition from infrared excesses around main sequence and giant stars. Finally, dusty and polluted white dwarfs hold a unique key to our understanding of the composition of rocky bodies around other stars. In particular, I will discuss WD1145+017, which has a transiting, disintegrating planetesimal. I will review what we know about this system through high speed photometry and spectroscopy and present new work on understanding the complex interplay of physics that creates white dwarf pollution from the disintegration of rocky bodies.

Commentary: The Materials Project: A materials genome approach to accelerating materials innovation

Directory of Open Access Journals (Sweden)

Anubhav Jain

2013-07-01

Full Text Available Accelerating the discovery of advanced materials is essential for human welfare and sustainable, clean energy. In this paper, we introduce the Materials Project (www.materialsproject.org, a core program of the Materials Genome Initiative that uses high-throughput computing to uncover the properties of all known inorganic materials. This open dataset can be accessed through multiple channels for both interactive exploration and data mining. The Materials Project also seeks to create open-source platforms for developing robust, sophisticated materials analyses. Future efforts will enable users to perform ‘‘rapid-prototyping’’ of new materials in silico, and provide researchers with new avenues for cost-effective, data-driven materials design.

STENCIL - Strategies and Tools for Environment-friendly Shore Nourishments as Climate Change Impact Low-Regret Measures

Science.gov (United States)

Schimmels, Stefan; Cofalla, Catrina; Deutschmann, Björn; Ganal, Caroline; Gijsman, Rik; Hass, H. Christian; Hollert, Henner; Mielck, Finn; Schlurmann, Thorsten; Schüttrumpf, Holger; Shiravani, Gholamreza; Staudt, Franziska; Strusinska, Agnieszka; Visscher, Jan; Wiltshire, Karen; Wolbring, Johanna

2017-04-01

Shore nourishments are regarded as an almost routine coastal protection measure and have been carried out worldwide for several decades. Recent studies generally conclude that "soft" coastal protection measures are an effective option for a sustainable coastal management. However, more research on economic sustainability, species-specific habitat demands and availability of sand deposits is required. Nowadays, the recent paradigm shifts to concepts like the Integrated Coastal Zone Management (ICZM) and the Ecosystem Approach to Management (EAM). For the German Wadden Sea these management objectives are an important issue of the "Wattenmeerstrategie 2100" (MELLUR-SH, 2015), a political strategy report that demands an adaption against the global change and the expected sea-level rise up to the year 2100. Hence, also new concepts and tools for the implementation of more sustainable, effective and environment-friendly shore nourishments are needed. The research project STENCIL joins the expertise of coastal engineers, geologists, biologists and toxicologists in order to make a first step towards the long-term goal of establishing an ICZM and EAM for shore nourishments in the German Wadden Sea. The project focuses on providing improved tools, models and methods for the prediction of coastal hydro- and morphodynamics. Furthermore, the impact of dredging and dumping activities on benthic habitats and their natural regeneration potentials will be evaluated. Since these impacts are still widely uninvestigated, monitoring of dredging areas and the surrounding sites using hydroacoustic devices, aerial photos and sediment samples for grain-size and benthos analysis remains of high importance. In order to develop standardized operative observation methods, analysis and decision-supporting tools, an implementation of field measurements, laboratory experiments as well as conceptual and numerical models is planned. These combined approaches will result in valuable data sets for

Project plan remove special nuclear material from PFP project plutonium finishing plant

International Nuclear Information System (INIS)

BARTLETT, W.D.

1999-01-01

This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) Remove Special Nuclear Material (SNM) Materials. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Plutonium Finishing Plant Integrated Project Management Plan (IPMP), HNF-3617, Rev. 0. This project plan is the top-level definitive project management document for PFP Remove SNM Materials project. It specifies the technical, schedule, requirements and the cost baselines to manage the execution of the Remove SNM Materials project. Any deviations to the document must be authorized through the appropriate change control process

ShoreZone Survey Data

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This dataset is a point file showing GPS trackline data collected during a ShoreZone aerial imaging survey. This flight trackline is recorded at 1-second intervals...

Coastal circulation and water column properties off Kalaupapa National Historical Park, Molokai, Hawaii, 2008-2010

Science.gov (United States)

Storlazzi, Curt D.; Presto, Katherine; Brown, Eric K.

2011-01-01

More than 2.2 million measurements of oceanographic forcing and the resulting water-column properties were made off U.S. National Park Service's Kalaupapa National Historical Park on the north shore of Molokai, Hawaii, between 2008 and 2010 to understand the role of oceanographic processes on the health and sustainability of the area's marine resources. The tides off the Kalaupapa Peninsula are mixed semidiurnal. The wave climate is dominated by two end-members: large northwest Pacific winter swell that directly impacts the study site, and smaller, shorter-period northeast trade-wind waves that have to refract around the peninsula, resulting in a more northerly direction before propagating over the study site. The currents primarily are alongshore and are faster at the surface than close to the seabed; large wave events, however, tend to drive flow in a more cross-shore orientation. The tidal currents flood to the north and ebb to the south. The waters off the peninsula appear to be a mix of cooler, more saline, deeper oceanic waters and shallow, warmer, lower-salinity nearshore waters, with intermittent injections of freshwater, generally during the winters. Overall, the turbidity levels were low, except during large wave events. The low overall turbidity levels and rapid return to pre-event background levels following the cessation of forcing suggest that there is little fine-grained material. Large wave events likely inhibit the settlement of fine-grained sediment at the site. A number of phenomena were observed that indicate the complexity of coastal circulation and water-column properties in the area and may help scientists and resource managers to better understand the implications of the processes on marine ecosystem health.

Survey of radiological contaminants in the near-shore environment at the Hanford Site 100-N Area reactor

International Nuclear Information System (INIS)

Van Verst, S.P.; Albin, C.L.; Patton, G.W.; Blanton, M.L.; Poston, T.M.; Cooper, A.T.; Antonio, E.J.

1998-09-01

Past operations at the Hanford Site 100-N Area reactor resulted in the release of radiological contaminants to the soil column, local groundwater, and ultimately to the near-shore environment of the Columbia River. In September 1997, the Washington State Department of Health (WDOH) and the Hanford Site Surface Environmental Surveillance Project (SESP) initiated a special study of the near-shore vicinity at the Hanford Site's retired 100-N Area reactor. Environmental samples were collected and analyzed for radiological contaminants ( 3 H, 90 Sr, and gamma/ emitters), with both the WDOH and SESP analyzing a portion of the samples. Samples of river water, sediment, riverbank springs, periphyton, milfoil, flying insects, clam shells, and reed canary grass were collected. External exposure rates were also measured for the near-shore environment in the vicinity of the 100-N Area. In addition, samples were collected at background locations above Vernita Bridge

Cross-Shore Environmental Gradients in the Western Mediterranean Coast and Their Influence on Nearshore Phytoplankton Communities

Directory of Open Access Journals (Sweden)

Gotzon Basterretxea

2018-04-01

Full Text Available During summer, when oligotrophic conditions prevail offshore in the Mediterranean Sea, enhanced phytoplankton stripes are often observed in nearshore waters. In this study, we examine the cross-shore hydrographic variability and the associated microbial plankton communities in this zone. Detailed cross-shore underway sampling at 47 coastal sites spread along the Balearic and Catalan coasts revealed the widespread existence of narrow bands of warm and decreased salinity water beholding high phytoplankton biomass (up to 50-fold vs. offshore chlorophyll. Most intense physical and biological anomalies along these transects were generally constrained to the first hundred meters from the shoreline (i.e., a transition zone starting at ~400 m. We use Principal Component Analysis (PCA and k-means cluster analysis to categorize temperature, salinity and chlorophyll (T, S and Chl in three main types of cross-shore trends. Prevalence of exponential-shaped Chl trends was observed particularly in areas with shoreward directed winds (B1-type. The other two trends (B2 and B3 presented variations off the coast produced by alongshore structures like river plumes, city outfalls and other features. Exponential-shaped cross-shore chlorophyll distribution (B1-type accumulated 90% of the total transect Chl variation in the first 367 ± 190 m from the shoreline, whereas this distance was variable in the other profile types. Repeated daily sampling at one site with this transect typology revealed that wind forcing variations produced fast response on cross-shore T and S properties. Chl was less sensitive to changes at this time-scale. Phytoplankton communities exhibited site-dependent responses to the nearshore environment. Pico- and nanoplankton assemblages, typically dominating coastal assemblages during summer in the Mediterranean Sea, showed lower cross-shore variation. Conversely, larger response to nearshore conditions was observed in microplankton populations

O?shore ?oating wind turbine and its dynamic problems?

Institute of Scientific and Technical Information of China (English)

Renchuan ZHU; Guoping MIAO; Ju FAN; Hua LIU

2016-01-01

Green energy sources and ocean wind power are plentiful in deep sea. More and more o?shore wind power plants are constructed in the deep water over hundred meters below the surface. While o?shore ?oating wind turbine system is working, wind turbine, ?oating foundation, and mooring system a?ect each other with wind, waves, and currents acting on them. Various o?shore ?oating wind turbine systems and the encoun-tered environmental loads are brie?y reviewed and discussed. It is di?cult and crucial to comprehensively analyze the aerodynamic-hydrodynamic-service system-structure un-der the coupling e?ect of o?shore ?oating wind turbine system. The environmental ?ow ?eld, structure scale, and rational applications of theories and approaches should be well considered in advance.

Project Management Plan for Material Stabilization

International Nuclear Information System (INIS)

SPEER, D.R.

1999-01-01

This plan presents the overall objectives, description, justification and planning for the plutonium Finishing Plant (PFP) Materials Stabilization project. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Plutonium Finishing Plant Integrated Project Management Plan (IPMP), HNF-3617/Rev. 0. This is the top-level definitive project management document that specifies the technical (work scope), schedule, and cost baselines to manager the execution of this project. It describes the organizational approach and roles/responsibilities to be implemented to execute the project. This plan is under configuration management and any deviations must be authorized by appropriate change control action. Materials stabilization is designated the responsibility to open and stabilize containers of plutonium metal, oxides, alloys, compounds, and sources. Each of these items is at least 30 weight percent plutonium/uranium. The output of this project will be containers of materials in a safe and stable form suitable for storage pending final packaging and/or transportation offsite. The corrosion products along with oxides and compounds will be stabilized via muffle furnaces to reduce the materials to high fired oxides

ShoreZone Mapped Data

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set is a polyline file of mapped ShoreZone units which correspond with data records found in the Unit, Xshr, BioUnit, and BioBand tables of this...

Optimally Reorganizing Navy Shore Infrastructure

National Research Council Canada - National Science Library

Kerman, Mitchell

1997-01-01

...), but infrastructure reductions continue to lag force structure reductions. The United States Navy's recent initiatives to reduce its shore infrastructure costs include "regionalization", "outsourcing," and "homebasing...

Build green and conventional materials off-gassing tests: A final report

Energy Technology Data Exchange (ETDEWEB)

Piersol, P.

1995-12-31

Build Green is a certification program that will identify and label building products with a known recycled content. The introduction of these recycled materials has raised the concern that they may emit more indoor pollutants than conventional materials. This study addresses that concern by analyzing Build Green and conventional materials to assess their potential for off-gassing. The study involved emission tests of 37 materials including carpets, carpet undercushions, structural lumber, foundation material, insulation, drywall, fiberboard, counter tops, and cabinetry. The results presented in this report include comparisons of Build Green and conventional materials in terms of emissions of volatile organic compounds and formaldehyde, the material loading ratio, and discussion of the specific sources of the emissions.

78 FR 39719 - Eastern Shore Natural Gas Company; Notice of Application

Science.gov (United States)

2013-07-02

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [ Docket No. CP13-498-000] Eastern Shore Natural Gas Company; Notice of Application Take notice that on June 13, 2013, Eastern Shore Natural Gas Company (Eastern Shore) filed with the Federal Energy Regulatory Commission an application under section 7...

77 FR 65542 - Eastern Shore Natural Gas Company; Notice of Application

Science.gov (United States)

2012-10-29

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP13-6-000] Eastern Shore Natural Gas Company; Notice of Application Take notice that on October 12, 2012, Eastern Shore Natural Gas Company (Eastern Shore), 1110 Forrest Avenue, Dover, Delaware 19904, filed in the above referenced docket...

75 FR 13524 - Eastern Shore Natural Gas Company; Notice of Application

Science.gov (United States)

2010-03-22

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP10-76-000] Eastern Shore Natural Gas Company; Notice of Application March 15, 2010. Take notice that on March 5, 2010, Eastern Shore Natural Gas Company, (Eastern Shore), 1110 Forrest Avenue, Dover, Delaware 19904, pursuant to...

Project plan remove special nuclear material from PFP project plutonium finishing plant; TOPICAL

International Nuclear Information System (INIS)

BARTLETT, W.D.

1999-01-01

This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) Remove Special Nuclear Material (SNM) Materials. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Plutonium Finishing Plant Integrated Project Management Plan (IPMP), HNF-3617,Rev. 0. This project plan is the top-level definitive project management document for PFP Remove SNM Materials project. It specifies the technical, schedule, requirements and the cost baselines to manage the execution of the Remove SNM Materials project. Any deviations to the document must be authorized through the appropriate change control process

An assessment of two off-shore igniter concepts

International Nuclear Information System (INIS)

Guenette, C. C.

1997-01-01

On June 12, 1996, two controlled in-situ oil spill burns (ISB), using a response-prepared ISB system, were conducted in the North Sea, 40 miles off the U. K. coast. The first burn involved fresh crude oil and was ignited with a hand-held igniter using a standard gelled fuel mixture. In the second burn an emulsified crude was used, ignited with a prototype emulsion breaking igniter (EBI) deployed using the Helitorch. The objective was to determine operational practicalities under realistic conditions when responding to a weathered oil situation in an offshore location. This paper is devoted to an assessment of the two igniter systems used during the trials. Results showed that oil aged by 12 hours with a 25 per cent water content burned down to a three-to-four per cent residue. The fire burn survived the two burns intact. The hand-held ignition system worked with fresh oil and the Helitorch lit emulsified oil using EBI. These trials were the first time that the EBI was deployed from a Helitorch slung beneath a helicopter. It was concluded that (1) the simplicity of the logistics required for the hand-held igniter would favour its use over the Helitorch method for fresh or lightly weathered oil, (2) more heavily weathered oils would require the use of an emulsion-breaking type igniter, and (3) aerial deployment of igniters offer the advantage of allowing more accurate positioning. 10 refs.,5 tabs., 3 figs

The Psychopharmacology Algorithm Project at the Harvard South Shore Program: An Algorithm for Generalized Anxiety Disorder.

Science.gov (United States)

Abejuela, Harmony Raylen; Osser, David N

2016-01-01

This revision of previous algorithms for the pharmacotherapy of generalized anxiety disorder was developed by the Psychopharmacology Algorithm Project at the Harvard South Shore Program. Algorithms from 1999 and 2010 and associated references were reevaluated. Newer studies and reviews published from 2008-14 were obtained from PubMed and analyzed with a focus on their potential to justify changes in the recommendations. Exceptions to the main algorithm for special patient populations, such as women of childbearing potential, pregnant women, the elderly, and those with common medical and psychiatric comorbidities, were considered. Selective serotonin reuptake inhibitors (SSRIs) are still the basic first-line medication. Early alternatives include duloxetine, buspirone, hydroxyzine, pregabalin, or bupropion, in that order. If response is inadequate, then the second recommendation is to try a different SSRI. Additional alternatives now include benzodiazepines, venlafaxine, kava, and agomelatine. If the response to the second SSRI is unsatisfactory, then the recommendation is to try a serotonin-norepinephrine reuptake inhibitor (SNRI). Other alternatives to SSRIs and SNRIs for treatment-resistant or treatment-intolerant patients include tricyclic antidepressants, second-generation antipsychotics, and valproate. This revision of the GAD algorithm responds to issues raised by new treatments under development (such as pregabalin) and organizes the evidence systematically for practical clinical application.

Off Shore wind energy – Case study of cooperation mechanisms design

DEFF Research Database (Denmark)

Klinge Jacobsen, Henrik; Hansen, Lise-Lotte Pade; Jansen, Jaap

2012-01-01

This document reports activities and results of Task 3.3 of the Intelligent Energy Europe supported project RES4Less. This work is the initial analyses and survey of barriers for implementing cooperation mechanisms in the EU countries. This work builds on earlier Intelligent Energy Europe projects...... also shared and enriched by comments from other members of the RES4Less Team during internal meetings of the project....

Waste-efficient materials procurement for construction projects: A structural equation modelling of critical success factors.

Science.gov (United States)

Ajayi, Saheed O; Oyedele, Lukumon O

2018-05-01

Albeit the understanding that construction waste is caused by activities ranging from all stages of project delivery process, research efforts have been concentrated on design and construction stages, while the possibility of reducing waste through materials procurement process is widely neglected. This study aims at exploring and confirming strategies for achieving waste-efficient materials procurement in construction activities. The study employs sequential exploratory mixed method approach as its methodological framework, using focus group discussion, statistical analysis and structural equation modelling. The study suggests that for materials procurement to enhance waste minimisation in construction projects, the procurement process would be characterised by four features. These include suppliers' commitment to low waste measures, low waste purchase management, effective materials delivery management and waste-efficient Bill of Quantity, all of which have significant impacts on waste minimisation. This implies that commitment of materials suppliers to such measures as take back scheme and flexibility in supplying small materials quantity, among others, are expected of materials procurement. While low waste purchase management stipulates the need for such measures as reduced packaging and consideration of pre-assembled/pre-cut materials, efficient delivery management entails effective delivery and storage system as well as adequate protection of materials during the delivery process, among others. Waste-efficient specification and bill of quantity, on the other hand, requires accurate materials take-off and ordering of materials based on accurately prepared design documents and bill of quantity. Findings of this study could assist in understanding a set of measures that should be taken during materials procurement process, thereby corroborating waste management practices at other stages of project delivery process. Copyright © 2018. Published by Elsevier Ltd.

Project network-oriented materials management policy for complex projects

DEFF Research Database (Denmark)

Dixit, Vijaya; Srivastava, Rajiv K; Chaudhuri, Atanu

2015-01-01

This work devises a materials management policy integrated with project network characteristics of complex projects. It proposes a relative quantitative measure, overall criticality (OC), for prioritisation of items based on penalty incurred due to their non-availability. In complex projects...... managerial tacit knowledge which provides them enough flexibility to provide information in real form. Computed OC values can be used for items prioritisation and as shortage cost coefficient in inventory models. The revised materials management policy was applied to a shipbuilding project. OC values were......, practicing managers find it difficult to measure OC of items because of the subjective factors and intractable nature of penalties involved. However, using their experience, they can linguistically identify the antecedents and relate them to consequent OC. This work adopts Fuzzy Set Theory to capture...

Proceedings from the Fissile Material Cut-off seminar in Stockholm

International Nuclear Information System (INIS)

Arbman, G.

1998-01-01

The Swedish Defence Research Establishment hosted an international expert seminar on the subject of verifying a prohibition of the production of fissile material for nuclear weapons purpose (cut-off) in Stockholm, June 3-5 1998. The objective of the seminar was to provide an opportunity for informal discussions among scientific and technical experts on various technical matters relating to the verification of a future Fissile Material Cut-off Treaty (FMCT). A stated aim of the seminar was to keep issues of scope to a minimum. Invited speakers and commentators were given an opportunity to present their views as written contributions. The present seminar proceedings are essentially the result of these views. In addition, short summaries of the discussions following each session are included. Although an attempt was made to be as complete and accurate as possible in reproducing these discussions, the editors apologise if some important points or statements have been omitted. If so, the main reason is that the documentation of the discussions were based on written notes, not taped recordings. Eight longer contributions have been separately indexed

Proceedings from the Fissile Material Cut-off seminar in Stockholm

Energy Technology Data Exchange (ETDEWEB)

Arbman, G. [ed.

1998-07-01

The Swedish Defence Research Establishment hosted an international expert seminar on the subject of verifying a prohibition of the production of fissile material for nuclear weapons purpose (cut-off) in Stockholm, June 3-5 1998. The objective of the seminar was to provide an opportunity for informal discussions among scientific and technical experts on various technical matters relating to the verification of a future Fissile Material Cut-off Treaty (FMCT). A stated aim of the seminar was to keep issues of scope to a minimum. Invited speakers and commentators were given an opportunity to present their views as written contributions. The present seminar proceedings are essentially the result of these views. In addition, short summaries of the discussions following each session are included. Although an attempt was made to be as complete and accurate as possible in reproducing these discussions, the editors apologise if some important points or statements have been omitted. If so, the main reason is that the documentation of the discussions were based on written notes, not taped recordings. Eight longer contributions have been separately indexed.

CNMI Shore-based Creel Survey

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Commonwealth of the Northern Mariana Islands (CNMI), Division of Fish and Wildlife (DFW) staff conducted shore-based creel surveys which have 2 major...

Influential Factors Affecting Materials Management in Construction Projects

Directory of Open Access Journals (Sweden)

Jusoh Zairra Mat

2017-12-01

Full Text Available Construction projects are more often than not plagued by poor performances such as delays, cost overrun, low productivity, construction wastes and compromised quality. Amongst the critical contributory factors of poor project performances, is the ineffectiveness of materials management occurring in the construction sites. Indeed, materials management is a very important component for construction projects. However, there are only limited numbers of research available regarding this topic. Thus, this research focuses its study on materials management, specifically in identifying the influential factors that affect materials management in the construction project activities. Literatures from books, journal articles and conference papers related to poor project performances and materials management have been reviewed. Consequently, this study sorted the salient influential factors and categorized them based on their specific group. Out of 47 factors identified, they are classified into 8 groups. They are (1 site condition; (2 planning and handling on site; (3 management; (4 materials; (5 supplier and manufacturer default; (6 transportation; (7 contractual; and (8 governmental interferences. In conclusion, this study contends that by identifying the influential factors affecting materials management, it will help construction players to avoid the occurrence of those factors and will minimize the negative impacts on the overall performance of construction projects. Hence, the handling-over of project will be according to schedule and not delayed by materials mismanagement.

Interstate Electrification Improvement Project

Energy Technology Data Exchange (ETDEWEB)

Puckette, Margaret [Shorepower Technologies, Hillsboro, OR (United States); Kim, Jeff [Shorepower Technologies, Hillsboro, OR (United States)

2015-07-01

The Interstate Electrification Improvement Project, publicly known as the Shorepower Truck Electrification Project (STEP), started in May 2011 and ended in March 2015. The project grant was awarded by the Department of Energy’s Vehicles Technology Office in the amount of $22.2 million. It had three overarching missions: 1. Reduce the idling of Class 8 tractors when parked at truck stops, to reduce diesel fuel consumption and thus U.S. dependence on foreign petroleum; 2. Stimulate job creation and economic activity as part of the American Reinvestment and Recovery Act of 2009; 3. Reduce greenhouse gas emissions (GHG) from diesel combustion and the carbon footprint of the truck transportation industry. The project design was straightforward. First, build fifty Truck Stop Electrification (TSE) facilities in truck stop parking lots across the country so trucks could plug-in to 110V, 220V, or 480VAC, and shut down the engine instead of idling. These facilities were strategically located at fifty truck stops along major U.S. Interstates with heavy truck traffic. Approximately 1,350 connection points were installed, including 150 high-voltage electric standby Transport Refrigeration Unit (eTRU) plugs--eTRUs are capable of plugging in to shore power1 to cool the refrigerated trailer for loads such as produce, meats and ice cream. Second, the project provided financial incentives on idle reduction equipment to 5,000 trucks in the form of rebates, to install equipment compatible with shore power. This equipment enables drivers to shut down the main engine when parked, to heat or cool their cab, charge batteries, or use other household appliances without idling—a common practice that uses approximately 1 gallon of diesel per hour. The rebate recipients were intended to be the first fleets to plug into Shorepower to save diesel fuel and ensure there is significant population of shore power capable trucks. This two part project was designed to complement each other by

Nordic project food contact materials

DEFF Research Database (Denmark)

Li, Ågot; Tesdal Håland, Julie; Petersen, Jens Højslev

Denmark, Finland, Faroe Islands, Iceland, Norway and Sweden have in 2013––2015 conducted a Nordic project on food contact materials. Food contact materials are used in all stages of food production and can be a general source of contamination. The food safety authorities in most of the Nordic...... countries have had a limited focus on the FCM area with the exception of Denmark and Finland. The aim of the project was therefore to control establishments producing, importing or using plastic food contact materials as well as to increase the knowledge of the inspectors performing these controls....... The focus of the inspections was to control the declaration of compliance (DoC) for plastic food contact materials. The requirement for a Doc is mandatory in order to ensure that the FCM complies with the legislation. In addition some products were analyzed for phthalates....

Verification arrangements for the proposed fissile material cut-off treaty

International Nuclear Information System (INIS)

Bragin, V.

2001-01-01

Since the mid-1950's, an agreement to terminate the production of fissile material for nuclear weapons has been on the agenda. On December 16, 1993, the UNGA adopted Resolution A/RES/48/75/L which recommends ''the negotiation in the most appropriate international forum of a non-discriminatory, multilateral and internationally and effectively verifiable treaty banning the production of fissile material for nuclear weapons and other nuclear explosive devices''. The proposed Fissile Material Cut-off Treaty (FMCT) is still one of the most important items on the multilateral disarmament and non-proliferation agenda. Successful achievement of the FMCT would be an important step towards the goal of eliminating nuclear weapons. (author)

Intelligent Materials Tracking System for Construction Projects Management

Directory of Open Access Journals (Sweden)

Narimah Kasim

2015-05-01

Full Text Available An essential factor adversely affecting the performance of construction projects is the improper handling of materials during site activities. In addition, paper-based reports are mostly used to record and exchange information related to the material components within the supply chain, which is problematic and inefficient. Generally, technologies (such as wireless systems and RFID are not being adequately used to overcome human errors and are not well integrated with project management systems to make tracking and management of materials easier and faster. Findings from a literature review and surveys showed that there is a lack of positive examples of such tools having been used effectively. Therefore, this research focused on the development of a materials tracking system that integrates RFID-based materials management with resources modelling to improve on-site materials tracking. Rapid prototyping was used to develop the system and testing of the system was carried out to examine the functionality and working appropriately. The proposed system is intended to promote the employment of RFID for automatic materials tracking with integration of resource modelling (Microsoft (R Office Project in the project management system in order to establish which of the tagged components are required resources for certain project tasks. In conclusion, the system provides an automatic and easy tracking method for managing materials during materials delivery and inventory management processes in construction projects.

Projection systems with a cut-off line for automotive applications

Science.gov (United States)

Kloos, G.; Eichhorn, K.

2005-08-01

The lighting systems of a car provide a variety of challenges from the point of view of illumination science and technology. Engineering work in this field has to deal both with reflector and lens design as well as with opto-mechanical design and sensor technology. It has direct implications on traffic safety and the efficiency in which energy is used. Therefore, these systems are continuously improved and optimized. In this context, adaptive systems that we investigate for automotive applications gain increasing importance. The properties of the light distribution in the vicinity of the cut-off line are of key importance for the safe and efficient operation of automotive headlamps. An alternative approach is proposed to refine the description of these properties in an attempt to make it more quantitative. This description is intended to facilitate intercomparison between different systems and/or to study environmental influences on the cut-off line of a system under investigation. Designing projection systems it is necessary to take a delicate trade-off between efficiency, light-distribution characteristics, mechanical boundary conditions, and legal requirements into account. Considerations and results on optical properties of three-axial reflectors in dependence of layout parameters will be given. They can serve as a guideline for the optical workshop and for free-form optimization.

Project Plan For Remove Special Nuclear Material (SNM) from Plutonium Finishing Plant (PFP) Project

International Nuclear Information System (INIS)

BARTLETT, W.D.

1999-01-01

This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) Remove SNM Materials. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Plutonium Finishing Plant Integrated Project Management Plan (IPMP), HNF-3617. This project plan is the top-level definitive project management document for the PFP Remove SNM Materials project. It specifies the technical, schedule, requirements and the cost baseline to manage the execution of the Remove SNM Materials project. Any deviation to the document must be authorized through the appropriate change control process. The Remove SNM Materials project provides the necessary support and controls required for DOE-HQ, DOE-RL, BWHC, and other DOE Complex Contractors the path forward to negotiate shipped/receiver agreements, schedule shipments, and transfer material out of PFP to enable final deactivation

Estimating slip deficit of the North Anatolian Fault beneath the Sea of Marmara, Turkey, using on- and off-shore geodetic data

Science.gov (United States)

Yamamoto, R.; Kido, M.; Ohta, Y.; Takahashi, N.; Yamamoto, Y.; Kalafat, D.; Pinar, A.; Ozener, H.; Ozeren, M. S.; Yoshiyuki, K.

2016-12-01

The North Anatolian Fault (NAF) in the northern Turkey regionally has right-lateral strike-slip motion. In the last decade, seismic activities have been migrating from east to west along the fault. In 1999, Izmit and Duzce Earthquakes were respectively occurred at 100 km and 200 km east of Istanbul, while it remains un-ruptured in the vicinity of Istanbul beneath the Sea of Marmara. In this region, onshore geodetic tools cannot be used and we instead used "seafloor acoustic extensometers" to detect slip deficit rate across the western part of the NAF (around 27.7 °E). A pair of extensometers can periodically measure precise range (about 3-4 mm precision per 1 km baseline) by observing round-trip time of acoustic signal between the two. We installed four instruments in September 2014 and an additional one in March 2015 across the NAF. We have recovered data for about 600-days through acoustic modem. By correcting travel-times for sound velocity using concurrently measured temperature, pressure and tilt change of instruments, we obtained 8-10 ±1 mm/yr of right-lateral movement at the site. Combing the result with on-shore GNSS data across the Sea of Marmara, we constructed a possible fault model. According to the model in Kaneko et al. (2013), we simply assume a bimodal slip condition on the fault plane that infinitely continues to the E-W direction; full-creep (25 mm/yr as is given at infinite distant from the fault plane) deeper than 15 km and applied an overriding partially locked layer (17 mm/yr slip deficit as is obtained by extensometers). We calculated 2-D displacement field in a homogeneous elastic half-space medium. With this model, N-S variation of on-shore GNSS data across the Sea of Marmara can be reasonably explained. However, due to the lack of GNSS site near the fault plane, constraint on the depth of the partially locked layer is not sufficient. We have newly installed GNSS sites, one of which is closer to the fault plane ( 10 km) than before and

The first cut-off wall in the Indian Himalayas for the dam of the Dhauliganga hydroelectric project

Energy Technology Data Exchange (ETDEWEB)

Brunner, W.G. [Bauer Maschinen GmbH, Berlin (Germany)

2006-07-01

This paper provided details a Bauer cutter used to build a cut-off wall for the Dhaulinganga power plant project in the Himalayan mountains. The dam for the project was built as a 56 m high concrete-faced rockfill dam with a length of 270 m at the crown. A cut-off wall was constructed on the upstream side of the dam extending down from the dam's plinth to the bedrock level. A Bauer cutter was used to key the cut-off wall straight into the bedrock, which omitted the need for a grout curtain. The cut-off wall is 1 m thick and 70 m deep, with a total area of 8000 m{sup 2}. The wall was constructed as a series of primary and secondary panels. Excavation of the panels was carried out in single bites by the Bauer DHG hydraulic diaphragm wall grabs, supported a box chisel, cross chisel and a Bauer BC 40 rock cutter. Trench stability was provided by bentonite slurry. The closing forces were activated by a cylinder which was installed vertically inside the base body. The Bauer cutter continuously removed soil and rock from the bottom of the trench for mixing with the bentonite slurry. The slurry was then pumped through a ring main of hose pipes to a desanding plant where it was cleaned and returned to the trench. Advantages offered by using the cutter included a consistently high output, an extremely high degree of verticality, watertight joints, and the ability to cut through hard boulders. Use of the cutter at the Dhaulinganga site showed that the project could not be carried out successfully without the use of the cutter, which was used whenever grab and chisel methods were unable to achieve satisfactory rates of penetration. Deployment of the cutter was essential to key the cut-off wall into the underlying bedrock. It was concluded that the Dhualinganga project will provide a model for future power generation projects in the Indian Himalayas. 11 figs.

Evolution of Cross-Shore Profile Models for Sustainable Coastal Design

Science.gov (United States)

Ismail, Nabil; El-Sayed, Mohamed

2014-05-01

Selection and evaluation of coastal structures are correlated with environmental wave and current parameters as well as cross shore profiles. The coupling between the environmental conditions and cross shore profiles necessitates the ability to predict reasonably the cross shore profiles. Results obtained from the validation of a cross-shore profile evolution model, Uniform Beach Sediment Transport-Time-Averaged Cross-Shore (UNIBEST-TC), were examined and further analyzed to reveal the reasons for the discrepancy between the model predictions of the field data at the surf zone of the Duck Beach in North Carolina, USA. The UNIBEST model was developed to predict the main cross shore parameters of wave height, direction, cross shore and long shore currents. However, the results of the model predictions are generally satisfactory for wave height and direction but not satisfactory for the remaining parameters. This research is focused on exploring the discrepancy between the model predictions and the field data of the Duck site, and conducting further analyses to recommend model refinements. The discrepancy is partially attributed due to the fact that the measured values, were taken close to the seabed, while the predicted values are the depth-averaged velocity. Further examination indicated that UNIBEST-TC model runs consider the RMS of the wave height spectrum with a constant gamma-value from the offshore wave spectrum at 8.0m depth. To confirm this argument, a Wavelet Analysis was applied to the time series of wave height and longshore current velocity parameters at the Duck site. The significant wave height ranged between 0.6m and 4.0m while the frequencies ranged between 0.08 to 0.2Hz at 8.0m water depth. Four cases corresponding to events of both high water level and low water level at Duck site were considered in this study. The results show that linear and non-linear interaction between wave height and long-shore current occur over the range of frequencies

Biological impacts of oil pollution: rocky shores. V. 7

International Nuclear Information System (INIS)

1997-01-01

Most people with access to the sea have at one time enjoyed looking into rockpools and searching for crabs under boulders. Rocky shores have a great deal of fascination for people and they are the closest that many of them will get to the mysteries below the low tide mark. They are found, in some form, on most of the world's coasts and their ecology has been the subject of many books, reports and scientific papers. Rocky shores encompass a variety of intertidal habitats and have a range of vulnerabilities to oil. While some areas are quickly and easily cleaned by natural forces others can trap oil in sensitive sub-habitats which may then be damaged and take many years to recover. Furthermore, rocky shores have an importance in the wider context of marine ecosystems and some provide important local fisheries resources, tourism and amenities. This report describes the factors that make some rocky shores more sensitive to oil spills than others and considers the most appropriate methods of clean-up. Case histories are used to illustrate the effects of spills and spill clean-up, as well as typical recovery rates. (UK)

Materials performance in off-gas systems containing iodine

International Nuclear Information System (INIS)

Beavers, J.A.; Berry, W.E.; Griess, J.C.

1981-11-01

During the reprocessing of spent reactor fuel elements, iodine is released to gas streams from which it is ultimately removed by conversion to nonvolatile iodic acid. Under some conditions iodine can produce severe corrosion in off-gas lines; in this study these conditions were established. Iron- and nickel-based alloys containing more than 6% molybdenum, such as Hastelloy G (7%), Inconel 625 (9%), and Hastelloy C-276 (16%), as well as titanium and zirconium, remained free of attack under all conditions tested. When the other materials, notably the austenitic stainless steels, were exposed to gas streams containing even only low concentrations of iodine and water vapors at 25 and 40 0 C, a highly corrosive, brownish-green liquid formed on their surfaces. In the complete absence of water vapor, the iodine-containing liquid did not form and all materials remained unaffected. The liquid that formed had a low pH (usually 2 inhibited attack

The Analysis Regarding the Building of a Hydraulic Power Plant on the Black Sea Shore

Directory of Open Access Journals (Sweden)

Gheorghe Samoilescu

2013-09-01

Full Text Available The present paper represents the result of a research project regarding the construction of a wave driven hydraulic plant that is going to be installed on the Black Sea shore in the area of the city of Constanta. Several phases were analyzed: numerical simulations for the micro plant – wave energy theory; finite element simulation – results and conclusions; generating the blueprint for the construction of the plant.

Environmental hazards for pipelines in coastal regions/shore approaches

International Nuclear Information System (INIS)

Jinsi, B.K.

1995-01-01

Often oil/gas and other hydrocarbons discovered and produced offshore are transported to onshore facilities via submarine pipelines. The route of such pipelines traverses through coastal/shore approach regions. For a rational/economic design, safe installation and subsequent operation it is of utmost importance to review, evaluate and finalize various environmental hazard such as winds, waves, currents, seabed topography, seabed and sub-bottom soils, seabed erosion and soil accretion. This paper addresses the above described environmental hazards, their assessment and techniques to prepare design parameters which must be used for stability analysis, installation methods, long term operation and maintenance for the shore approaches. Additionally, various proven pipeline installation and stabilization techniques for the shore approach region are detailed. As case histories, three approaches installed in the Dutch North Sea are described

33 CFR 169.102 - Who is the shore-based authority?

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Who is the shore-based authority... (CONTINUED) PORTS AND WATERWAYS SAFETY SHIP REPORTING SYSTEMS Establishment of Two Mandatory Ship Reporting Systems for the Protection of Northern Right Whales § 169.102 Who is the shore-based authority? The U.S...

46 CFR 169.686 - Shore power.

Science.gov (United States)

2010-10-01

... requirements: (a) A shore power connection box or receptacle and a cable connecting this box or receptacle to... power cable must be provided with a disconnect means located on or near the main distribution panel...

American Samoa Shore-based Creel Survey

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The DMWR staff has also conducted shore-based creel surveys which also have 2 major sub-surveys; one to estimate participation (fishing effort), and one to provide...

Boat And Shore Oracle Data Tables

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Oracle Tables To Provide Boat and Shore Data which contains the object of this system is to provide an inventory of vessels that answer two fundamental questions:...

Off-grid community electrification projects based on wind and solar energies: A case study in Nicaragua

OpenAIRE

Ranaboldo, Matteo; Domenech, Bruno; Reyes, Gustavo Alberto; Ferrer Martí, Laia; Pastor Moreno, Rafael; García Villoria, Alberto

2015-01-01

Despite various institutional efforts, about 22% of the total Nicaraguan population still do not have access to electricity. Due to the dispersed nature of many rural inhabitants, off-grid electrification systems that use renewable energy sources are a reliable and sustainable option to provide electricity to isolated communities. In this study, the design of an off-grid electrification project based on hybrid wind-photovoltaic systems in a rural community of Nicaragua is developed. Firstly t...

Water resources of the Lake Erie shore region in Pennsylvania

Science.gov (United States)

Mangan, John William; Van Tuyl, Donald W.; White, Walter F.

1952-01-01

An abundant supply of water is available to the Lake Erie Shore region in Pennsylvania. Lake i£rie furnishes an almost inexhaustible supply of water of satisfactory chemical quality. Small quantities of water are available from small streams in the area and from the ground. A satisfactory water supply is one of the factors that affect the economic growth of a region. Cities and towns must have adequate amounts of pure water for human consumption. Industries must have suitable water ih sufficient quantities for all purposes. In order to assure. success and economy, the development of water resources should be based on adequate knowledge of the quantity and quality of the water. As a nation, we can not afford to run the risk of dissipating our resources, especially in times of national emergency, by building projects that are not founded on sound engineering and adequate water-resources information. The purpose of this report is to summarize and interpret all available water-resources information for the Lake Erie Shore region in Pennsylvania. The report will be useful for initial guidance in the location or expansion of water facilities for defense and nondefense industries and the municipalities upon which they are dependent. It will also be useful in evaluating the adequacy of the Geological Survey's part of the basic research necessary to plan the orderly development of the water resources of the Lake Erie Shore region. Most of the data contained inthis report have been obtained'by the U. S. Geological Survey in cooperation with the Pennsylvania Department of Forests and Waters, the Pennsylvania Department of Internal Affairs, and the Pennsylvania State Planning Board, Department of Commerce. The Pennsylv~nia Department of Health furnished information on water pollution. The report was prepared in the Water Resources Division of the U. S. Geological Survey b:y John W. Mangan (Surface Water). Donald W. VanTuyl (Ground Water). and Walter F. White, Jr. (Quality of

Results of a multidisciplinary study in the Marmara Supersite, on-shore area: Büyükçekmece landslide

Science.gov (United States)

Coccia, Stella; Bigarré, Pascal; Ergintav, Semih; Ozel, Oguz; Yalcinkaya, Esref; Ozalabey, Serdar; Bourdeau, Céline; Martino, Salvatore; Lenti, Luca; Zucca, Francesco; Moro, Marco

2016-04-01

The MARsite project (Nov 2012-Avril 2016), one of the three SUPERSITE concept FP7 projects, deals with the definition of new directions in seismic hazard assessment through focused earth observation in the Marmara Supersite. This project gathers different research groups in a comprehensive monitoring activity developed in the Sea of Marmara Region. This region is one of the most densely populated parts of Europe and rated at high seismic risk level since the 1999 Izmit and Duzce devastating earthquakes. The 6th Work Package of MARsite project offered a very valuable frame to undertake simultaneous and complementary scientific investigations and studies to get deeper insight in the seismic and rainfall landslide topic, ranging from methodology to hazard assessment tool. This package focused on two sub-regional areas of high interest. First, the Avcilar-Beylikdüzü peninsula, located westwards of Istanbul, is a highly urbanized concentrated landslide prone area, showing high susceptibility to both rainfalls while affected by very significant seismic site effects. Second, the off-shore entrance of the Izmit Gulf, close to the termination of the surface rupture of the 1999 earthquake, that shows an important slump mass facing the Istanbul coastline. For the on-shore area, after refining the landslide inventory of the peninsula, one of the nine inventoried rototranslational landslides was chosen as pilot site, the Büyükçekmece landslide. This landslide has a continuous activity and a composite mechanism (including several secondary sliding surfaces); it moves at low velocity and involves sandy and clayey deposits of a local Cenozoic Succession damaging several infrastructures, such as buildings and roads. Various geophysical campaigns were carried out and then a field temporary multi-parameter monitoring was set up, composed of GPS-RTK, two seismic probes, thermometer, rain-gauge, moisture, etc.. Hyperspectral and Dinsar imagery technologies were also deployed to

Reef and Shore. Hawaii Nature Study Project.

Science.gov (United States)

Hawaii Univ., Honolulu. Curriculum Research and Development Group.

This teaching guide is one of a series developed by the Curriculum Research and Development Group at the University of Hawaii. The program is laboratory and field oriented for elementary students. The focus of study for the project is the plant and animal life and the physical components of the Hawaiian environment, and their ecological…

Warm summer nights and the growth decline of shore pine in Southeast Alaska

Science.gov (United States)

Sullivan, Patrick F.; Mulvey, Robin L.; Brownlee, Annalis H.; Barrett, Tara M.; Pattison, Robert R.

2015-12-01

Shore pine, which is a subspecies of lodgepole pine, was a widespread and dominant tree species in Southeast Alaska during the early Holocene. At present, the distribution of shore pine in Alaska is restricted to coastal bogs and fens, likely by competition with Sitka spruce and Western hemlock. Monitoring of permanent plots as part of the United States Forest Service Forest Inventory and Analysis program identified a recent loss of shore pine biomass in Southeast Alaska. The apparent loss of shore pine is concerning, because its presence adds a vertical dimension to coastal wetlands, which are the richest plant communities of the coastal temperate rainforest in Alaska. In this study, we examined the shore pine tree-ring record from a newly established plot network throughout Southeast Alaska and explored climate-growth relationships. We found a steep decline in shore pine growth from the early 1960s to the present. Random Forest regression revealed a strong correlation between the decline in shore pine growth and the rise in growing season diurnal minimum air temperature. Warm summer nights, cool daytime temperatures and a reduced diurnal temperature range are associated with greater cloud cover in Southeast Alaska. This suite of conditions could lead to unfavorable tree carbon budgets (reduced daytime photosynthesis and greater nighttime respiration) and/or favor infection by foliar pathogens, such as Dothistroma needle blight, which has recently caused widespread tree mortality on lodgepole pine plantations in British Columbia. Further field study that includes experimental manipulation (e.g., fungicide application) will be necessary to identify the proximal cause(s) of the growth decline. In the meantime, we anticipate continuation of the shore pine growth decline in Southeast Alaska.

Herbivory drives the spread of salt marsh die-off.

Directory of Open Access Journals (Sweden)

Mark D Bertness

Full Text Available Salt marsh die-off is a Western Atlantic conservation problem that has recently spread into Narragansett Bay, Rhode Island, USA. It has been hypothesized to be driven by: 1 eutrophication decreasing plant investment into belowground biomass causing plant collapse, 2 boat wakes eroding creek banks, 3 pollution or disease affecting plant health, 4 substrate hardness controlling herbivorous crab distributions and 5 trophic dysfunction releasing herbivorous crabs from predator control. To distinguish between these hypotheses we quantified these variables at 14 Narragansett Bay salt marshes where die-off intensity ranged from <5% to nearly 98%. Nitrogen availability, wave intensity and plant growth did not explain any variation in die-off. Herbivory explained 73% of inter-site variation in die-off and predator control of herbivores and substrate hardness also varied significantly with die-off. This suggests that salt marsh die-off is being largely driven by intense herbivory via the release of herbivorous crabs from predator control. Our results and those from other marsh systems suggest that consumer control may not simply be a factor to consider in marsh conservation, but with widespread predator depletion impacting near shore habitats globally, trophic dysfunction and runaway consumption may be the largest and most urgent management challenge for salt marsh conservation.

Radioactive materials in construction projects

International Nuclear Information System (INIS)

Herrmann, Ralf; Ohlendorf, Frank; Kaltz, Andrea Christine

2014-01-01

Till 1990 residues often of the former uranium mining were partly used as building material for road construction, terrain compensation and house construction in Saxony. These recommendations for action are addressed to applicants, planners and building constructors in the engineering and construction sector. It provides information for planning, preliminary investigations, applications, construction supervision related to radiation protection measures and documentation of construction projects where radioactive materials are expected.

Predicting the Performance of Chain Saw Machines Based on Shore Scleroscope Hardness

Science.gov (United States)

Tumac, Deniz

2014-03-01

Shore hardness has been used to estimate several physical and mechanical properties of rocks over the last few decades. However, the number of researches correlating Shore hardness with rock cutting performance is quite limited. Also, rather limited researches have been carried out on predicting the performance of chain saw machines. This study differs from the previous investigations in the way that Shore hardness values (SH1, SH2, and deformation coefficient) are used to determine the field performance of chain saw machines. The measured Shore hardness values are correlated with the physical and mechanical properties of natural stone samples, cutting parameters (normal force, cutting force, and specific energy) obtained from linear cutting tests in unrelieved cutting mode, and areal net cutting rate of chain saw machines. Two empirical models developed previously are improved for the prediction of the areal net cutting rate of chain saw machines. The first model is based on a revised chain saw penetration index, which uses SH1, machine weight, and useful arm cutting depth as predictors. The second model is based on the power consumed for only cutting the stone, arm thickness, and specific energy as a function of the deformation coefficient. While cutting force has a strong relationship with Shore hardness values, the normal force has a weak or moderate correlation. Uniaxial compressive strength, Cerchar abrasivity index, and density can also be predicted by Shore hardness values.

The Protective Properties of Common Reed Plantations on Shores of the Lower Volga Region

Directory of Open Access Journals (Sweden)

Solodovnikov Denis Anatolyevich

2014-12-01

Full Text Available The abrasion processing of shores is a pressing problem of large water basins of the Lower Volga region and other Russian regions. About 3 km2 of shoreland is annually lost in the zone of the Volgograd water basin as a result of this process. The existing methods of shores protection are connected with the creation of concrete structures having a high level of erosion resistance. They are extremely expensive and in most cases they are not affordable for rural municipalities suffering from abrasion. The authors offer cheap and environmentally friendly way of protecting the shores of large water basins from abrasion. The method is based on the plantation of a common reed strip on a water basin’s shallow. The biological characteristics of common reed as the main component of shore protection structures are described. The terms and milestones of the work in the conditions of the Volgograd water basin are developed. The main result of applying our methodology is the complete cessation of abrasion processing of the shore at the corresponding piece of land. The authors overview the positive qualities of reed plantations, their biocenotic, barrier and waterproof role in on-shore ecosystems. The application of the described method will allow saving for the national economy dozens of hectares of valuable shore lands annually, in particular, irrigated cropland, settlement lands, infrastructure. In addition to the direct benefits associated with the conservation of land resources, the intensity of adverse processes associated with erosion of shores (water basin muddying, deterioration of sanitary qualities of water will decrease. Due to the wide geographic spread of common reed described in the present work, the technology of shores stabilization can be applied at almost all lowland water basins of Russia.

The integrated melter off-gas treatment systems at the West Valley Demonstration Project

International Nuclear Information System (INIS)

Vance, R.F.

1991-12-01

The West Valley Demonstration project was established by an act of Congress in 1980 to solidify the high level radioactive liquid wastes produced from operation of the Western New York Nuclear Services Center from 1966 to 1972. The waste will be solidified as borosilicate glass. This report describes the functions, the controlling design criteria, and the resulting design of the melter off-gas treatment systems

Sea-Shore Interface Robotic Design

Science.gov (United States)

2014-06-01

for various beachfront terrains. Robotics , Robot , Amphibious Vehicles, Mobility, Surf-Zone, Autonomous, Wheg, exoskeleton Unclassified Unclassified...controllers and to showcase the benefits of a modular construction. The result was an exoskeleton design with modular components, see Figure 2.1. Figure 2.1...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS SEA-SHORE INTERFACE ROBOTIC DESIGN by Timothy L. Bell June 2014 Thesis Advisor: Richard Harkins

Assessment of instruments in facilitating investment in off-grid renewable energy projects

International Nuclear Information System (INIS)

Shi, Xunpeng; Liu, Xiying; Yao, Lixia

2016-01-01

Renewable off-grid solution plays a critical role in supporting rural electrification. However, off-grid Renewable Energy (OGRE) project financing faces significant challenges due to limited financing access, low affordability of consumers, high transactions costs and etc. Various supporting instruments have been implemented to facilitate OGRE investment. This study assesses the effectiveness of those instruments with a framework consists of three dimensions: feasibility, sustainability and replicability. The weights of each dimension in the framework and the scores of each instrument are assessed by expert surveys based on the Delphi method. It is suggested that all the three dimensions should be taken into consideration while assessing the instruments, among which feasibility and sustainability are considered as the most important dimensions in the assessment framework. Furthermore, the top-5 most effective instruments in facilitating OGRE investment are local engagement in operation and maintenance, loan guarantee, start-up grant, end user financing, and concessional finance. Developing countries that need to increase electrification, such as most of the ASEAN member states, could use these top scored instruments despite of their limited amount of public finance. - Highlights: •Assess the effectiveness of instruments for promoting financing for OGRE projects. •A three-dimension assessment framework: feasibility, sustainability, replicability. •Use online surveys and the Delphi method to collect experts’ assessment. •The most effective instruments: local engagement, loan guarantee, and start-up grant.

The psychopharmacology algorithm project at the Harvard South Shore Program: an algorithm for acute mania.

Science.gov (United States)

Mohammad, Othman; Osser, David N

2014-01-01

This new algorithm for the pharmacotherapy of acute mania was developed by the Psychopharmacology Algorithm Project at the Harvard South Shore Program. The authors conducted a literature search in PubMed and reviewed key studies, other algorithms and guidelines, and their references. Treatments were prioritized considering three main considerations: (1) effectiveness in treating the current episode, (2) preventing potential relapses to depression, and (3) minimizing side effects over the short and long term. The algorithm presupposes that clinicians have made an accurate diagnosis, decided how to manage contributing medical causes (including substance misuse), discontinued antidepressants, and considered the patient's childbearing potential. We propose different algorithms for mixed and nonmixed mania. Patients with mixed mania may be treated first with a second-generation antipsychotic, of which the first choice is quetiapine because of its greater efficacy for depressive symptoms and episodes in bipolar disorder. Valproate and then either lithium or carbamazepine may be added. For nonmixed mania, lithium is the first-line recommendation. A second-generation antipsychotic can be added. Again, quetiapine is favored, but if quetiapine is unacceptable, risperidone is the next choice. Olanzapine is not considered a first-line treatment due to its long-term side effects, but it could be second-line. If the patient, whether mixed or nonmixed, is still refractory to the above medications, then depending on what has already been tried, consider carbamazepine, haloperidol, olanzapine, risperidone, and valproate first tier; aripiprazole, asenapine, and ziprasidone second tier; and clozapine third tier (because of its weaker evidence base and greater side effects). Electroconvulsive therapy may be considered at any point in the algorithm if the patient has a history of positive response or is intolerant of medications.

A complex rupture image of the 2011 off the Pacific coast of Tohoku Earthquake revealed by the MeSO-net

Science.gov (United States)

Honda, Ryou; Yukutake, Yohei; Ito, Hiroshi; Harada, Masatake; Aketagawa, Tamotsu; Yoshida, Akio; Sakai, Shin'ichi; Nakagawa, Shigeki; Hirata, Naoshi; Obara, Kazushige; Kimura, Hisanori

2011-07-01

Strong ground motions from the 2011 off the Pacific coast of Tohoku Earthquake, the most powerful earthquake to have occurred in and around Japan after the installation of a modern seismic network, were recorded for more than 300 seconds by a dense and wide-span seismic network, the Metropolitan Seismic Observation Network (MeSO-net), installed around the Tokyo metropolitan area about 200 km away from the epicenter. We investigate the rupture process of the earthquake in space and time by performing semblance-enhanced stacking analysis of the waveforms in a frequency range of 0.05 to 0.5 Hz. By projecting the power of the stacked waveforms to an assumed fault plane, the rupture propagation image of the large and complex earthquake has been successfully obtained. The seismic energy was mainly generated from the off-shore areas of about 100 km away from the coast in Miyagi and Fukushima Prefectures. The shallow and eastern part of the fault along the Japan trench off Miyagi Prefecture released strong seismic energy which might have been related to the excitation of gigantic tsunami. In contrast, the southern shallow part of the fault plane, off Ibaraki Prefecture, released only minor seismic energy. Our analysis suggests that the focal areas combining both the officially-forecasted Miyagi-oki earthquake and those of historical earthquakes that occurred off the coast of Fukushima Prefecture in 1938 were broken, resulting in the 2011 great M 9 earthquake.

27 CFR 9.79 - Lake Michigan Shore.

Science.gov (United States)

2010-04-01

... Michigan Shore. (a) Name. The name of the viticultural area described in this section is “Lake Michigan... southeast along the winding course of the Kalamazoo River for approximately 35 miles until it intersects the...

Reliable, Lightweight Transmissions For Off-Shore, Utility Scale Wind Turbines

Energy Technology Data Exchange (ETDEWEB)

Jean-Claude Ossyra

2012-10-25

The objective of this project was to reduce the technical risk for a hydrostatic transmission based drivetrain for high-power utility-size wind turbines. A theoretical study has been performed to validate the reduction of cost of energy (CoE) for the wind turbine, identify risk mitigation strategies for the drive system and critical components, namely the pump, shaft connection and hydrostatic transmission (HST) controls and address additional benefits such as reduced deployment costs, improved torque density and improved mean time between repairs (MTBR).

Radiotracer study to investigate the dilution and dispersion of sewage off Worli coast

International Nuclear Information System (INIS)

Yelgaonkar, V.N.; Pendharkar, A.S.; Agashe, S.M.; Kumar, U.S.; Kulkarni, U.P.; Mendhekar, G.N.; Navada, S.V.

1998-01-01

Radiotracer experiments were carried out off Worli Coast, Mumbai to study the dilution and dispersion of sewage from the proposed out fall at 3000 m and existing out fall at 500 m from the shore. Dilutions observed were 2.3 x 10 7 at 3.3 km from the injection point for the disposal at 3,000 m and 6.9 x 10 5 at 5 km for the disposal at 500 m. Dispersion coefficients obtained from two dimensional advection dispersion model for the experiment off 500 m are Dx 15-18 m 2 /s and Dy = 0.5-2 m 2 /s. (author)

India and the fissile material cut-off treaty: policy options

International Nuclear Information System (INIS)

Nayan, Rajiv

2011-01-01

The international community inside and outside the Conference of Disarmament is underscoring the need for concluding a fissile material cut-off treaty (FMCT). The Indian government, for a long period, has been sponsoring the idea. Notwithstanding the international stagnation, the issue has been instigating periodic debate in India on the Indian approach. The periodic revival of the issue requires that India revisit its policy on fissile material production as well as its approach towards a possible EVICT. This article examines the question: should India's approach to conclude an FMCT be within the UN institutional framework? The new international reality is pushing for a new context, new realignments and a fresh outlook for an FMCT. India should take its own time to support conclusion of an FMCT so that its national interests and security are not adversely affected. (author)

Short-term observation of beach dynamics using cross-shore profiles and foreshore sediment

Digital Repository Service at National Institute of Oceanography (India)

Dora, G.U.; SanilKumar, V.; Johnson, G.; Philip, C.S.; Vinayaraj, P.

Cross-shore beach profiles and textural characteristics of foreshore sediment were analyzed for understanding an annual cycle of intertidal beach dynamics at Devbag, an Island sheltered estuarine coast. Cross-shore transects were monitored in a...

Alcohol content in the 'Hyper-Reality' MTV show 'Geordie Shore'

OpenAIRE

Lowe, Eden; Britton, John; Cranwell, Jo

2018-01-01

Aim: To quantify the occurrence of alcohol content, including alcohol branding, in the popular primetime television UK Reality TV show 'Geordie Shore' Series 11. \\ud \\ud Methods: A 1-min interval coding content analysis of alcohol content in the entire DVD Series 11 of 'Geordie Shore' (10 episodes). Occurrence of alcohol use, implied use, other alcohol reference/paraphernalia or branding was recorded. \\ud \\ud Results: All categories of alcohol were present in all episodes. 'Any alcohol' conte...

Utgrunden off-shore wind farm - Measurements of underwater noise

International Nuclear Information System (INIS)

Lindell, Hans

2003-07-01

Airicole, GE Wind Energy and SEAS/Energi E2 have initiated this project in order to achieve a better understanding on how offshore based wind farms effect the underwater noise. The main reason is to gain knowledge on how marine wildlife could be effected by this kind of installation. The measurements were performed at Utgrunden wind farm that is situated at the reef Utgrunden on the Swedish southeast coast. The farm consists of seven 1,5 MW turbines. Three hydrophones registered the underwater sound and four accelerometers the tower vibrations. The measurement campaign was conducted during a period from November 2002 to February 2003. The objectives with this project is to answer the following issues and its results are: 1. What is the character of sound from a single power station? - The turbines radiate sound mainly at a few dominating frequencies from 30 Hz up to 800 Hz. At frequencies below 3 Hz no contribution from the turbines can be detected due to the high background level from the waves and the low tower vibration level. 2. What are the sound generating mechanisms in the turbine? - Gearbox mesh frequency vibrations that are transmitted via the tower structure and radiated out to the water mainly generate the sound. Airborne blade sound is effectively dampened in the transition from air to water. 3. How does the sound attenuate with increasing distance at different frequencies? - The average attenuation per doubled distance for frequencies between 31 Hz and 722 Hz is approximately 4 dB in the measured positions. No clear frequency dependence could be found. 4. How does the sound pressure level vary with increasing wind speed? - With increasing wind speed, the sound pressure level increases and the dominating frequencies move upward due to increasing turbine rotational speed. 5. How does sound from different power stations interfere with each other and influence the over all sound image? - No clear tendencies of interference could be observed in this study

Temperature, productivity and sediment characteristics as drivers of seasonal and spatial variations of dissolved methane in the near-shore coastal areas (Belgian coastal zone, North Sea)

Science.gov (United States)

Borges, Alberto V.; Speeckaert, Gaëlle; Champenois, Willy; Scranton, Mary I.; Gypens, Nathalie

2017-04-01

The open ocean is a modest source of CH4 to the atmosphere compared to other natural and anthropogenic CH4 emissions. Coastal regions are more intense sources of CH4 to the atmosphere than open oceanic waters, in particular estuarine zones. The CH4 emission to the atmosphere from coastal areas is sustained by riverine inputs and methanogenesis in the sediments due to high organic matter (OM) deposition. Additionally, natural gas seeps are sources of CH4 to bottom waters leading to high dissolved CH4 concentrations in bottom waters (from tenths of nmol L-1 up to several µmol L-1). We report a data set of dissolved CH4 concentrations obtained at nine fixed stations in the Belgian coastal zone (Southern North Sea), during one yearly cycle, with a bi-monthly frequency in spring, and a monthly frequency during the rest of the year. This is a coastal area with multiple possible sources of CH4 such as from rivers and gassy sediments, and where intense phytoplankton blooms are dominated by the high dimethylsulfoniopropionate (DMSP) producing micro-algae Phaeocystis globosa, leading to DMSP and dimethylsulfide (DMS) concentrations. Furthermore, the BCZ is a site of important OM sedimentation and accumulation unlike the rest of the North Sea. Spatial variations of dissolved CH4 concentrations were very marked with a minimum yearly average of 9 nmol L-1 in one of the most off-shore stations and maximum yearly average of 139 nmol L-1 at one of the most near-shore stations. The spatial variations of dissolved CH4 concentrations were related to the organic matter (OM) content of sediments, although the highest concentrations seemed to also be related to inputs of CH4 from gassy sediments associated to submerged peat. In the near-shore stations with fine sand or muddy sediments with a high OM content, the seasonal cycle of dissolved CH4 concentration closely followed the seasonal cycle of water temperature, suggesting the control of methanogenesis by temperature in these OM

Kinder Lernen Deutsch. Materials Project Part I. Revised.

Science.gov (United States)

American Association of Teachers of German.

The Kinder Lernen Deutsch (LKD) materials evaluation project identifies materials appropriate for the elementary school German classrooms in grades K-8. This guide consists of an annotated bibliography, with ratings, of these materials. The guiding principles by which the materials were assessed were: use of the communicative approach; integration…

Satellite SAR wind resource mapping in China (SAR-China)

Energy Technology Data Exchange (ETDEWEB)

Badger, M.

2009-07-15

The project 'Off-Shore Wind Energy Resource Assessment and Feasibility Study of Off-Shore Wind Farm Development in China' is funded by the EU-China Energy and Environment Programme (EEP) and runs for one year (August 2008 - August 2009). The project is lead by the China Meteorological Administration (CMA) and supported by SgurrEnergy Ltd. Risoe National Laboratory for Sustainable Energy at the Technical University of Denmark (Risoe DTU) has been commissioned to perform a satellite based wind resource analysis as part of the project. The objective of this analysis is to map the wind resource offshore at a high spatial resolution (1 km). The detailed wind resource maps will be used, in combination with other data sets, for an assessment of potential sites for offshore wind farm development along the coastline from Fujian to Shandong in China. (au)

IAEA safeguards for the Fissile Materials Disposition Project

International Nuclear Information System (INIS)

Close, D.A.

1995-06-01

This document is an overview of International Atomic Energy Agency (IAEA) safeguards and the basic requirements or elements of an IAEA safeguards regime. The primary objective of IAEA safeguards is the timely detection of the diversion of a significant quantity of material and the timely detection of undeclared activities. The two important components of IAEA safeguards to accomplish their primary objective are nuclear material accountancy and containment and surveillance. This overview provides guidance to the Fissile Materials Disposition Project for IAEA inspection requirements. IAEA requirements, DOE Orders, and Nuclear Regulatory Commission regulations will be used as the basis for designing a safeguards and security system for the facilities recommended by the Fissile Materials Disposition Project

On-off controller for installation to test the pressurized water reactor material

International Nuclear Information System (INIS)

Zauq, M.H.

1982-05-01

This report describes the design of an ON-OFF controller based on the 6800 microprocessor in its assembly language and its interfacing with its environment (sensors, periphery, etc). The controller is meant to control the temperature and the pressure inside an experimental chamber in which the material under test is placed. The ''Design basis accident'' conditions (e.g., LOCA) for a pressurized water reactor are simulated in the experimental chamber [fr

Shoreline Units with Results from the 2014 Study Entitled "Characterizing Participation in Non-Commercial Fishing and other Shore-based Recreational Activities on St. Croix, U.S. Virgin Islands"

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The project "Characterizing participation in non-commercial fishing and other shore-based recreational activities on St. Croix, U.S. Virgin Islands" was conducted in...

77 FR 39694 - National Currents Energy Services, LLC; Notice of Declaration of Intention and Petition for...

Science.gov (United States)

2012-07-05

... Services, LLC. e. Name of Project: Wards Island Tidal Energy Project. f. Location: The proposed Wards Island Tidal Energy Project will be located off the south shore of Wards Island, in the Hell Gate... Manhattan, New York City, NY. g. Filed Pursuant to: 18 CFR part 24, section 24.1. h. Applicant Contact...

Gender Stereotyping and the Jersey Shore: A Content Analysis

Directory of Open Access Journals (Sweden)

Jacqueline S. Anderson

2016-05-01

Full Text Available Reality television is a highly popular genre, with a growing body of scholarly research. Unlike scripted programming, which offers fictional storylines, reality television relies heavily on cast member’s reactions to carefully crafted situations. This study examined the relationship between reality television and gender role stereotyping in a seminal reality television show, MTV’s Jersey Shore. Content analysis was used to conduct an in-depth examination of the first season of Jersey Shore, investigating three gendered issues: physical appearance, social roles and behavioral traits. Findings demonstrated the carefully manufactured relationship between gender role stereotyping and reality television programming in Jersey Shore, and illustrate the development of the female reality show character as related to sexualized behavior and social/emotional gender stereotypes. The depiction of female reality show characters seems to have increased its level of sensationalism, while continuing to be clichéd and conventional, while depiction of male characters is beginning to push the boundaries of being typecast in regards to their physical appearance and role in performing domestic tasks. Additionally, physical alterations on screen were many, warranting further investigation of this behavior.

A mathematical model of past, present and future shore level displacement in Fennoscandia

Energy Technology Data Exchange (ETDEWEB)

Paasse, T. [Sveriges Geologiska Undersoekning, Goeteborg (Sweden)

1997-12-01

Shore level displacement in Fennoscandia is mainly due to two interactive vertical movements, glacio-isostatic uplift and eustatic sea level rise. A recent investigation of the lake-tilting phenomenon has made it possible to discern the course of glacio-isostatic. As a consequence an iteration process to estimate glacio-isostatic uplift and eustatic rise using empirical data of the shore level displacement has been started. The model indicates that there are two mechanisms involved in glacio-isostatic uplift, one slow and the other fast. The main uplift, still in progress, acts slowly. Arctan functions have proved to be suitable tools for describing slow glacio-isostatic uplift. The time of maximal uplift rate is isochronous, meaning that slow uplift occurred simultaneously in all Fennoscandia in an interactive movement. For slow uplift there is a relationship between the rate of decline and the crustal thickness. In areas with greater crustal thickness the rate of decline of the glacio-isostatic recovery is lower than in areas with thinner crust. The fast mechanism gave rise to a crustal subsidence which started about 12 500 BP. After about 10 300 BP, in the early Holocene, the subsidence was restored by a fast uplift. Normal distribution functions have been used for calculating the fast mechanism. The mantle material exhibits plastic behaviour. When the mantle encounters short-lived stresses the material behaves like an elastic solid but in response to long-term stresses it will flow. The slow mechanism can be linked to viscous flow and as a response to long-term stresses. The fast mechanism is probably the response to a short-lived stress. This stress could have been caused by renewed ice loading, due to a self-triggered redistribution of the ice load during deglaciation. Future development regarding glacio-isostatic uplift, eustasy and shore level displacement is predicted in Fennoscandia using the results from the modelling. Predictions are based on the

Research projects on life management: materials ageing

International Nuclear Information System (INIS)

Gomez Briceno, D.

1997-01-01

Materials ageing is a time-dependent process, that involves the loss of availability of nuclear plants. Radiation embrittlement, stress corrosion cracking, irradiation assisted stress corrosion cracking, and thermal ageing are the most relevant time-dependent material degradation mechanisms that can be identified in the materials ageing process. The Materials Programme of Nuclear Energy Institute at CIEMAT carries out research projects and metallurgical examinations of failed components to gain some insight into the mechanisms of materials degradation with a direct impact on the life management of nuclear plants. (Author)

To future generations....

Energy Technology Data Exchange (ETDEWEB)

Drees, H.M. [Dutch Energy Corp., Rhenen (Netherlands)

1997-12-31

One of the world`s first 500 kW turbines was installed in the Netherlands in 1989. This forerunner of the current NedWind 500 kW range also represents the earliest predesign of the NedWind megawatt turbine. After the first turbines several design modifications followed, e.g. rotor diameter was increased and a tip brake was added. After that polyester blades were introduced and rotor diameter was further increased. The drive train was also redesigned. Improvements on the 500 kW turbine concept resulted in decreased cost and increased annual energy output. The 500 kW turbines serve in the first Dutch off-shore wind farm installed in 1994. This pilot project established proof that off-shore implementation is a promising option for the Dutch energy supply. Installation of megawatt turbines off-shore is currently being studied. Wind energy can substantially contribute to electricity supply. Maximum output in kilowatt-hours is the target.

Cross-shore currents in the surf zone

DEFF Research Database (Denmark)

Aagaard, Troels; Vinther, Niels

2008-01-01

  While the dynamics and kinematics of various types of mean cross-shore current flows in the surf zone (undertow and rip currents) are fairly well understood, the causes for transitions occurring between these two types of mean circulation patterns remain obscure. On longshore barred beaches...

Structure Changes of Macrobenthic Community on Rocky Shores After the Hebei Spirit Oil Spill

OpenAIRE

Yun-Hwan Jung; Heung-Sik Park; Kon-Tak Yoon; Hyung-Gon Lee; Chae-Woo Ma

2013-01-01

In Korea, more than 300 oil spill accidents occur every year. Despite the frequency, only a small pool of data is available on the initial effect of oil spill on macrobenthic fauna inhabiting rocky shores. The aim of this study was to analyze the variation of macrobenthic fauna composition and community structure on rocky shores, and understand the impact of oil on rocky shore organisms after the Hebei Spirit oil spill. Field surveys were carried out in five regions dose to the wreck site in ...

Towards A Framework For ICT-Enabled Materials Management In Complex Projects

Directory of Open Access Journals (Sweden)

N. B. Kasim

2011-10-01

Full Text Available This paper describes a research project, aimed at developing a system to integrate RFID-based materials management with resources modelling in project management to improve on-site materials tracking and inventory management processes. In order to develop the system, a comprehensive literature review and exploratory case studies were conducted to investigate current practices, problems, implementation of ICT and potential use of emerging technologies (such as RFID and wireless technologies in overcoming the logistical difficulties associated with materials management. An initial assessment revealed that there is a potential to improve the tracking and management of materials using modern ICT, thus will enhance the operational efficiency of the project delivery process. Moreover, sophisticated technologies such as wireless systems and tagging are not generally used to overcome human error in materials identification and the space constraints inherent in many projects. This paper concludes the finding from case studies for developing a real-time materials tracking framework to support construction professional in handling materials more effectively.

St. Croix: Shore-based Fishing Access Points (2014)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Two local experts delineated access points for shore-based fishing along the shoreline of St. Croix, USVI. The points were documented at different times, and then...

Giving perspective to cliff exposures with ground penetrating radar: Devonian lacustrine shore zone architecture

Science.gov (United States)

Andrews, Steven; Moreau, Julien; Archer, Stuart

2015-04-01

The orbitally-controlled cyclic lacustrine successions of the Middle Devonian in Northern Scotland contains repeated developments of shore zone sandstones. However, due to the cliff-forming nature of the succession and the attitude of the sections through these sandstones, interpretation of this facies has been problematic. To better understand the shore zone systems, we carried out very high resolution sedimentary logging and constructed photo-panels which were combined with high resolution GPR profiling (250 MHz). To ensure close ties between the sedimentary logs and the GPR data, the cliffs were accessed using rope access techniques while GPR grids were shot directly above. The profiles were shot mainly in the strike direction of what was thought to be the shore elongation every 5-10 m and every 20-30 m in the dip direction. Shore zone systems of 3 different sequences have been imaged for a total of 1155 m of GPR profile collected. This configuration has allowed 3D visualisation of the architecture of the shore zone systems and, in combination with detailed sedimentology, provided insights into the generation of the dynamic shore zone environments. The coastal cliffs of northern Scotland expose sedimentary cycles on average 16-m-thick which record deep lake, perennial lake and playa environments. The shore zone deposits reach 2 to 3.5 m in thickness. Loading and discrete channel forms are recognised in both the GPR data and sedimentary logs through the lower portion of the lake shore zone successions. Up-section the sandstone beds appear to become amalgamated forming subtle low angle accretionary bar complexes which although visible in outcrop, after careful investigation, can be fully visualised and examined in the GPR data. The 3D visualisation allowed mapping the architecture and distribution of the bars . The orientation of these features, recognised from the survey, is consistent with extensive palaeocurrent measurements from oscillation ripples. Further

A mathematical model of the shore level displacement in Fennoscandia

International Nuclear Information System (INIS)

Paasse, T.

1996-12-01

The shore level displacement in Fennoscandia (Scandinavia and Finland) is mainly due to two cooperative vertical movements, the glacio-isostatic uplift and the eustatic sea level rise. The course of the glacio-isostatic uplift has recently been made discernible according to an investigation of the lake tilting phenomenon. This new information has made it possible to start an iteration process for detailed estimations of the uplift and the rise using empirical data of the shore level displacement. Arctan-functions have proved to be suitable tools for describing the glacio-isostatic uplift. The model indicates that there are two mechanisms involved in the glacio-isostatic uplift, one slow that can be linked to viscous flow, and one fast that might be explained by compression followed by decompression. The future development regarding the glacio-isostatic uplift, the eustasy and the shore level displacement is predicted in Fennoscandia using the results from the modeling. The predictions are based on the assumption that the crustal and eustatic developments will follow the trends that exist today. 124 refs, 98 figs

Regional Ocean Modeling System (ROMS): Oahu South Shore

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Regional Ocean Modeling System (ROMS) 2-day, 3-hourly forecast for the region surrounding the south shore of the island of Oahu at approximately 200-m resolution....

Minutes of the workshop on off-site release criteria for contaminated materials

International Nuclear Information System (INIS)

Singh, S.P.N.

1989-11-01

A one and one-half-day workshop was held May 2-3, 1989, at the Pollard Auditorium in Oak Ridge, Tennessee, with the objective of formulating a strategy for developing reasonable and uniform criteria for releasing radioactively contaminated materials from the US Department of Energy (DOE) sites. This report contains the minutes of the workshop. At the conclusion of the workshop, a plan was formulated to facilitate the development of the above-mentioned off-site release criteria

Local scale atmospheric diffusion at a coastal site in the presence of breeze effect (Phase I and II: data collection at a coastal site and off shore)

International Nuclear Information System (INIS)

Cagnetti, P.; Ferrara, V.; Pellegrini, A.

1985-01-01

The aim of this contract is the characterization, from the thermal and anemological point of view of the lower layers of the atmosphere at a coastal site, affected by breeze circulation. Data are utilized to set up diffusion models for accidental releases of airborne materials, both of short and prolonged duration. Five inland meteorological campaigns, starting from Jan. 82 (Jan., Apr., Jul., Oct. 1982, Jan. 1983), have been carried out; an appropriate extension of the contract allowed the execution of two more campaigns in the open sea (Apr., Jul. 1983), utilizing the oceanographic ship ''Bannock'' kindly supplied by CNR. The analysis of the data showed the development of a well defined IBL during on-shore flow only in Spring and Summer, while an inversion layer was detectable aloft independently of the season (provided that an anticyclonic situation was present). According to those relevant features a simple diffusion model has been developed for short duration releases at local scale. Finally, the analysis and elaboration of the data, collected on site by a meteorological automatic station, allowed the extension of the model to prolonged releases

Photosynthesis in a sub-Antarctic shore-zone lichen

NARCIS (Netherlands)

Smith, V.; Gremmen, N.J.M.

2001-01-01

Photosynthetic responses to moisture, light, temperature, salinity and inorganic nitrogen fertilization are reported for a shore-zone lichen Turgidiusculum complicatulum (formerly Mastodia tesselata), a possible recent introduction to sub-Antarctic Marion Island. Optimum moisture contents for net

Mercury Sources and Cycling in the Great Lakes: Dramatic Changes Resulting from Altered Atmospheric Loads and the Near-Shore Shunt

Science.gov (United States)

Krabbenhoft, D. P.; DeWild, J. F.; Maglio, M. M.; Tate, M. T.; Ogorek, J. M.; Hurley, J. P.; Lepak, R.

2013-12-01

there have been large declines in surface water total Hg concentrations (50-75%) across the Great Lakes since about 2000, an observation in agreement with concurrent declines in atmospheric deposition. In addition to a decline in inputs, we hypothesize that appreciable increases in volatilization of gaseous Hg have occurred. Mercury volatilization is directly related to water clarity (via the photo-reduction process), which has increased substantially in the Great Lakes since the invasion of zebra mussels and quagga mussels. Finally, although substantial declines in total aqueous Hg levels are apparent, fish mercury levels over the same time period appear to be relatively steady, and in some locations increasing. We submit this apparent discordance is also the outcome of the invasive mussels, which have caused near-shore eutrophication and off-shore oligotrophication commonly referred to as the near-shore shunt. Initial sampling by this project has revealed that these eutrophied zones are markedly enriched in MeHg. Therefore, it appears that while the open water regions of the Great Lakes appear to have experienced significant aqueous Hg declines, fish Hg levels may be responding to a new site of methylation in the near-shore zone.

Alcohol Content in the 'Hyper-Reality' MTV Show 'Geordie Shore'.

Science.gov (United States)

Lowe, Eden; Britton, John; Cranwell, Jo

2018-05-01

To quantify the occurrence of alcohol content, including alcohol branding, in the popular primetime television UK Reality TV show 'Geordie Shore' Series 11. A 1-min interval coding content analysis of alcohol content in the entire DVD Series 11 of 'Geordie Shore' (10 episodes). Occurrence of alcohol use, implied use, other alcohol reference/paraphernalia or branding was recorded. All categories of alcohol were present in all episodes. 'Any alcohol' content occurred in 78%, 'actual alcohol use' in 30%, 'inferred alcohol use' in 72%, and all 'other' alcohol references occurred in 59% of all coding intervals (ACIs), respectively. Brand appearances occurred in 23% of ACIs. The most frequently observed alcohol brand was Smirnoff which appeared in 43% of all brand appearances. Episodes categorized as suitable for viewing by adolescents below the legal drinking age of 18 years comprised of 61% of all brand appearances. Alcohol content, including branding, is highly prevalent in the UK Reality TV show 'Geordie Shore' Series 11. Two-thirds of all alcohol branding occurred in episodes age-rated by the British Board of Film Classification (BBFC) as suitable for viewers aged 15 years. The organizations OfCom, Advertising Standards Authority (ASA) and the Portman Group should implement more effective policies to reduce adolescent exposure to on-screen drinking. The drinks industry should consider demanding the withdrawal of their brands from the show. Alcohol content, including branding, is highly prevalent in the MTV reality TV show 'Geordie Shore' Series 11. Current alcohol regulation is failing to protect young viewers from exposure to such content.

Off shore wind power plants

International Nuclear Information System (INIS)

Bettinali, F.; Botta, G.; Lembo, E.; Serri, L.; Vailati, R.; Viani, S.

2008-01-01

In Italy are present sea area with good wind intensity usable for offshore wind farms. The tourist vocation of territory requires facilities to accept the people at sufficient distance from the coast in deep waters. Innovative solution on the floating platforms can be an interesting prospect [it

NORDTEST Project on Moisture Buffer Value of Materials

DEFF Research Database (Denmark)

Rode, Carsten; Peuhkuri, Ruut Hannele; Hansen, Kurt Kielsgaard

2005-01-01

Building materials and furnishing used in contact with indoor air have some effect to moderate the variations of indoor humidity in occupied buildings. Very low humidity can be alleviated in winter, as well as can high indoor humidity in summer and during high occupancy loads. Thus, materials can...... have been carried out on various typical building materials. The paper gives an account on the definition of the Moisture Buffer Value, it outlines the content of the test protocol, and it gives some examples of results from the Round Robin Tests....... being completed, to develop a definition, and to declare it in the form of a NORDTEST method. Apart from the definition of the term Moisture Buffer Value, the project also declares a test protocol which expresses how materials should be tested. Finally as a part of the project, some Round Robin Tests...

Investigations of a large scale eared grebe (Podiceps nigricollis) die-off at the Salton Sea, California in 1992

Science.gov (United States)

Meteyer, C.U.; Audet, D.J.; Rocke, T.E.; Radke, W.; Creekmore, L.H.; Duncan, R.

2004-01-01

An estimated 150,000 Eared Grebes (Podiceps nigricollis) died at the Salton Sea between 16 December 1991 and 21 April 1992. This represented the largest documented mortality event of Eared Grebes at the time and approximately 6% of the North American population. During the die-off, grebes exhibited several uncharacteristic behaviors, such as congregating at freshwater tributaries, repeatedly gulping freshwater, preening excessively, moving onto land, and allowing close approach and/or capture. Avian cholera was diagnosed in Eared Grebes collected along the north and west shoreline of the Sea late in the die-off but not from the majority of the Eared Grebes dying along the south shore. Gross and histological examinations and diagnostic testing for viruses, bacteria, and parasites did not identify the cause of mortality in the majority of Eared Grebes examined from the south shore of the Sea. Liver concentrations of arsenic, chromium, DDE, mercury, selenium, and zinc were elevated in some Eared Grebes, but none of those contaminants exceeded known thresholds for independent lethality. Poisoning by heavy metals, organochlorine, organophosphorus, or carbamate pesticides, avian botulism, and salt were ruled out as the cause of mortality. Hypotheses for the die-off are interactive effects of contaminants, immunosuppression, a yet unidentified biotoxin or pathogen present in the Salton Sea, impairment of feather waterproofing leading to hypothermia, or a unique manifestation of avian cholera that evades laboratory detection.

Materials Modification Under Ion Irradiation: JANNUS Project

International Nuclear Information System (INIS)

Serruys, Y.; Trocellier, P.; Ruault, M.-O.; Henry, S.; Kaietasov, O.; Trouslard, Ph.

2004-01-01

JANNUS (Joint Accelerators for Nano-Science and Nuclear Simulation) is a project designed to study the modification of materials using multiple ion beams and in-situ TEM observation. It will be a unique facility in Europe for the study of irradiation effects, the simulation of material damage due to irradiation and in particular of combined effects. The project is also intended to bring together experimental and modelling teams for a mutual fertilisation of their activities. It will also contribute to the teaching of particle-matter interactions and their applications. JANNUS will be composed of three accelerators with a common experimental chamber and of two accelerators coupled to a 200 kV TEM

Long Island north shore helicopter route environmental study

Science.gov (United States)

2012-02-21

This report presents the results of the noise and emissions analysis of helicopter operations along the North Shore Helicopter Route of Long Island, New York performed by the Federal Aviation Administration, with the assistance of the Volpe Center...

Lightning protection of wind turbines

Energy Technology Data Exchange (ETDEWEB)

Soerensen, T; Brask, M H [DEFU (Denmark); Jensen, F V; Raben, N [SEAS (Denmark); Saxov, J [Nordjyllandsvaerket (Denmark); Nielsen, L [Vestkraft (Denmark); Soerensen, P E [Risoe National Lab. (Denmark)

1999-03-01

Lightning damage to wind turbines is a serious problem for Danish power companies, who have experienced some cases with very costly lightning damage and a large number of cases with minor damage. The most costly cases include one catastrophic damage to an entire wind turbine, and several cases of destruction of blades, main bearings, generators and control systems. Over the years there have been several hundreds of cases with minor damage - typically damage and interruptions of the control and communication systems, or the power systems. The Danish power companies anticipate that the lightning threat will be even bigger for the large off-shore wind turbine installations that are currently being planned in Denmark. Furthermore, it is known from the off-shore wind turbines at Vindeby in Denmark that the costs of inspection and particularly repair work must be expected to be much higher off-shore as compared to wind turbines on land. These considerations was the background for a two year project concerned with investigation of lighting damages and with the formulation of a DEFU Recommendation for lightning protection of wind turbines, which was published in January 1999. The project was funded by the Danish power companies Elsam, Eltra, Elkraft and by DEFU. (au)

Prospects for a fissile material cut-off: Achieving a successful NPT review process

International Nuclear Information System (INIS)

Kalinowski, M.

1999-01-01

Finding new and creative ways to overcome the current deadlock in progress in nuclear arms control became the most important question in the past year. For a long time it had been expected that after the conclusion of the Comprehensive Test Ban Treaty, the next step would be to ban production of fissile materials for weapon purposes. Three strategies are proposed for reaching relevant cut-off agreements. First suggests possible fore for achievement of relevant agreements, second is the proposal to begin with international register of inventories and production capabilities for all relevant nuclear materials, and the third one is ti identify equivalent steps obligatory for all the parties involved

Near-shore distribution of Heaviside's ( Cephalorhynchus heavisidii ...

African Journals Online (AJOL)

Heaviside's dolphins were found in shallower, cooler water than dusky dolphins and were more likely to be seen during brighter phases of the moon (when nocturnal light conditions may influence the vertical migration patterns of prey) and in areas of high hake abundance. Near-shore fishing activity was higher in the ...

77 FR 74548 - North Shore Railroad Company-Acquisition and Operation Exemption-PPL Susquehanna, LLC

Science.gov (United States)

2012-12-14

... Railroad Company--Acquisition and Operation Exemption--PPL Susquehanna, LLC North Shore Railroad Company...., that PPL Susquehanna, LLC (PPLS), and Allegheny Electric Cooperative, Inc. (AEC), the owners of the... extends to an interchange with Norfolk Southern Railway. North Shore states that it provides the only...

Effects of density on cross-shore sediment transport

NARCIS (Netherlands)

Bosboom, J.; de Meijer, R.J.; Kraus, N.C.; McDougal, W.G.

1999-01-01

After the discovery of high concentrations of heavy minerals on the beach of the Dutch barrier-island Ameland, the radiometric fingerprinting technique was developed to assess offshore heavy-mineral concentrations. These measurements revealed cross-shore variations in the heavy-mineral

Spawning of the chilean hake (Merluccius gayi in the upwelling system off Talcahuano in relation to oceanographic features

Directory of Open Access Journals (Sweden)

Cristian A. Vargas

2001-06-01

Full Text Available Previous studies have shown that the upwelling area off Talcahuano, in central-south Chile, is an important spawning zone for the hake Merluccius gayi. We document the results of a study designed to assess the importance of oceanographic features on the horizontal and vertical distribution of hake eggs and larvae. Ichthyoplankton samples and oceanographic data (CTDO casts, and wind speed and direction were collected during a cruise carried out off Talcahuano (36º22´S-37º10´S in early spring (October 1996, which included a grid of 61 stations up to 60 nm offshore. The oceanographic information obtained revealed the presence of an upwelling plume at Lavapie Point (southern zone extending northward over the shelf, and the presence of a warmer water parcel close to shore in the northern area. Peak egg densities occurred in this northern area over the shelf, in a nucleus located at the shoreward moving deeper layer (40-100 m deep and associated with the upwelling front about 20-30 nm from shore. The highest larval abundance also occurred in the northern area over the shelf and in the deeper layer but closer to shore than the egg nucleus. Because the timing (early spring and location of spawning (at depth, over the shelf and in association with frontal structures are also shared by other hake species in upwelling areas, we propose that they may be part of a more commonly developed strategy to enhance offspring survival in coastal upwelling areas of eastern boundary currents.

Bulk material management mode of general contractors in nuclear power project

International Nuclear Information System (INIS)

Zhang Jinyong; Zhao Xiaobo

2011-01-01

The paper introduces the characteristics of bulk material management mode in construction project, and the advantages and disadvantages of bulk material management mode of general contractors in nuclear power project. In combination with the bulk material management mode of China Nuclear Power Engineering Co., Ltd, some improvement measures have been put forward as well. (authors)

161 EVALUATION OF ON-SHORE OIL SPILL REMEDIATION ...

African Journals Online (AJOL)

EVALUATION OF ON-SHORE OIL SPILL REMEDIATION OPERATIONS IN. PORT HARCOURT ... study is an attempt to unravel the effectiveness of clean-up exercises undertaken by oil .... Research Design. The study ..... remediation as well as tilling and evacuation of affected soils would certainly be more productive.

Evaluating potentials for future generation off-shore wind-power outside Norway

Science.gov (United States)

Benestad, R. E.; Haugen, J.; Haakenstad, H.

2012-12-01

With todays critical need of renewable energy sources, it is naturally to look towards wind power. With the long coast of Norway, there is a large potential for wind farms offshore Norway. Although there are more challenges with offshore wind energy installations compared to wind farms on land, the offshore wind is generally higher, and there is also higher persistence of wind speed values in the power generating classes. I planning offshore wind farms, there is a need of evaluation of the wind resources, the wind climatology and possible future changes. In this aspect, we use data from regional climate model runs performed in the European ENSEMBLE-project (van der Linden and J.F.B. Mitchell, 2009). In spite of increased reliability in RCMs in the recent years, the simulations still suffer from systematic model errors, therefore the data has to be corrected before using them in wind resource analyses. In correcting the wind speeds from the RCMs, we will use wind speeds from a Norwegian high resolution wind- and wave- archive, NORA10 (Reistad et al 2010), to do quantile mapping (Themeβl et. al. 2012). The quantile mapping is performed individually for each regional simulation driven by ERA40-reanalysis from the ENSEMBLE-project corrected against NORA10. The same calibration is then used to the belonging regional climate scenario. The calibration is done for each grid cell in the domain and for each day of the year centered in a +/-15 day window to make an empirical cumulative density function for each day of the year. The quantile mapping of the scenarios provide us with a new wind speed data set for the future, more correct compared to the raw ENSEMBLE scenarios. References: Reistad M., Ø. Breivik, H. Haakenstad, O. J. Aarnes, B. R. Furevik and J-R Bidlo, 2010, A high-resolution hindcast of wind and waves for The North Sea, The Norwegian Sea and The Barents Sea. J. Geophys. Res., 116. doi:10.1029/2010JC006402. Themessl M. J., A. Gobiet and A. Leuprecht, 2012

Challenging the conventional wisdom -- The case for off-site water treatment

International Nuclear Information System (INIS)

Gidumal, R.H.

1994-01-01

Two recent remediation projects have demonstrated off-site water treatment as economically beneficial to on-site treatment. The project cost showed that significantly reduced capital costs and O and M costs were obtained by sending the material to a commercial waste water treatment plant vs. depending on on-site treatment. This paper will detail the line item capital costs as well as the expected annual operation and maintenance charges. The first project involved a major oil refinery needed to remediate a 2.1 MM gallon lagoon. The lagoon was used to dispose of primary oil/water/solids/separation sludge and currently comprised of 7% solid material. The second project is a remediation project with a pump and treat system. The water contains heavy metal (Pb, As) and VOC (ppm TCE, PCE, etc.) contamination. The Record of Decision (ROD) specified installation of groundwater/leachate extraction and injection wells within the existing landfill for dewatering and flushing of the system. The treatment choice for the leachate (40--60 GPM) was on-site pretreatment and discharge to the local POTW

GCD TechPort Data Sheets Thermal Protection System Materials (TPSM) Project

Science.gov (United States)

Chinnapongse, Ronald L.

2014-01-01

The Thermal Protection System Materials (TPSM) Project consists of three distinct project elements: the 3-Dimensional Multifunctional Ablative Thermal Protection System (3D MAT) project element; the Conformal Ablative Thermal Protection System (CA-TPS) project element; and the Heatshield for Extreme Entry Environment Technology (HEEET) project element. 3D MAT seeks to design, develop and deliver a game changing material solution based on 3-dimensional weaving and resin infusion approach for manufacturing a material that can function as a robust structure as well as a thermal protection system. CA-TPS seeks to develop and deliver a conformal ablative material designed to be efficient and capable of withstanding peak heat flux up to 500 W/ sq cm, peak pressure up to 0.4 atm, and shear up to 500 Pa. HEEET is developing a new ablative TPS that takes advantage of state-of-the-art 3D weaving technologies and traditional manufacturing processes to infuse woven preforms with a resin, machine them to shape, and assemble them as a tiled solution on the entry vehicle substructure or heatshield.

Surf zone entrainment, along-shore transport, and human health implications of pollution from tidal outlets

Science.gov (United States)

Grant, S. B.; Kim, J. H.; Jones, B. H.; Jenkins, S. A.; Wasyl, J.; Cudaback, C.

2005-10-01

Field experiments and modeling studies were carried out to characterize the surf zone entrainment and along-shore transport of pollution from two tidal outlets that drain into Huntington Beach and Newport Beach, popular public beaches in southern California. The surf zone entrainment and near-shore transport of pollutants from these tidal outlets appears to be controlled by prevailing wave conditions and coastal currents, and fine-scale features of the flow field around the outlets. An analysis of data from dye experiments and fecal indicator bacteria monitoring studies reveals that the along-shore flux of surf zone water is at least 50 to 300 times larger than the cross-shore flux of surf zone water. As a result, pollutants entrained in the surf zone hug the shore, where they travel significant distances parallel to the beach before diluting to extinction. Under the assumption that all surf zone pollution at Huntington Beach originates from two tidal outlets, the Santa Ana River and Talbert Marsh outlets, models of mass and momentum transport in the surf zone approximately capture the observed tidal phasing and magnitude of certain fecal indicator bacteria groups (total coliform) but not others (Escherichia coli and enterococci), implying the existence of multiple sources of, and/or multiple transport pathways for, fecal pollution at this site. The intersection of human recreation and near-shore pollution pathways implies that, from a human health perspective, special care should be taken to reduce the discharge of harmful pollutants from land-side sources of surface water runoff, such as tidal outlets and storm drains.

Run-off from roofs

International Nuclear Information System (INIS)

Roed, J.

1985-01-01

In order to find the run-off from roof material a roof has been constructed with two different slopes (30 deg C and 45 deg C). Beryllium-7 and caesium-137 has been used as tracers. Considering new roof material the pollution removed by runoff processes has been shown to be very different for various roof materials. The pollution is much more easily removed from silicon-treated material than from porous red-tile roof material. Caesium is removed more easily than beryllium. The content of caesium in old roof materials is greater in red-tile than in other less-porous materials. However, the measured removal from new material does not correspond to the amount accumulated in the old. This could be explained by weathering and by saturation effects. This last effect is probably the more important. The measurements on old material indicates a removal of 44-86% of the caesium pollution by run-off, whereas the measurement on new showed a removal of only 31-50%. It has been demonstrated that the pollution concentration in the run-off water could be very different from that in rainwater. The work was part of the EEC Radiation Protection Programme and done under a subcontract with Association Euratom-C.E.A. No. SC-014-BIO-F-423-DK(SD) under contract No. BIO-F-423-81-F. (author)

Surveying Caulerpa (Chlorophyta species along the shores of the eastern Mediterranean

Directory of Open Access Journals (Sweden)

S. UKABI

2012-02-01

Full Text Available Caulerpa (Chlorophyta species inhabiting intertidal and shallow subtidal areas along the Israeli Mediterranean shores were surveyed (i.e. presence/absence on a seasonal basis from 2007-2009. We recorded the presence of three speciesC. prolifera, C. mexicana, and C. scalpelliformis. These species were noticeable in autumn and inconspicuous during winter, thus, revealing seasonality and population dynamics. There were no indications of well-known invasive species such as Caulerpa racemosa var.cylindracea and Caulerpa taxifolia. This study is the first of a kind that assesses the geographical distribution and seasonality of the genus Caulerpa along the Israeli shores.

Conceptual design of a 10 MW shore-based OTEC plant

Science.gov (United States)

Stevens, H. C.; Genens, L.; Panchal, C. B.

1984-09-01

A 1982 study of a 10 MWe shore-based closed-cycle ocean thermal energy conversion (OTFC) plant at Keahole Point, Hawaii, is updated to reflect advances in technology that have occurred over the past two years. Design options that show promise for reducing the capital cost of the plant are presented. The options studied include the heat exchangers, the number and size of the cold-water pipes (CWP), the materials and method of construction of the CWP, deployment technique. In all cases, the new options are within modest extrapolations of the current state of the art. Thermal-hydraulic optimization codes were developed and used to upgrade and improve the design, and to focus on those components where significant cost reductions are possible. The power system was improved with more cost-effective heat exchangers and a more water-efficient design. An advanced cold-water pipe option was selected that uses compact, brazed-aluminum heat exchangers. Options for parallel or bundled pipes of smaller (2 meter) diameter were reviewed. It was found that the smaller diameters present fewer fabrication problems, and potentially simpler deployment methods. Also studied were various options for CWP materials and construction.

Dynamical structure of the sea off the east coast of Peninsular Malaysia

DEFF Research Database (Denmark)

Daryabor, Farshid; Abu Samah, Azizan; Ooi, See Hai

2015-01-01

structure of the sea off ECPM. The first simulation is a control run, using climatological monthly mean wind stress, surface freshwater flux, heat and observational oceanic inflow and outflow at open boundaries. The second simulation is an experiment aimed at presenting the seasonally averaged effect...... of isolated forcing in the absence of wind stress. This procedure allows understanding of the upwelling mechanism in the absence of wind stress forcing within the region. The model simulated the oceanographic features in the region reasonably well, in particular the circulation and temperature patterns...... conformed to those of Simple Ocean Data Assimilation and observations. Results show the possibility of upwelling in the summer monsoon along the sea off ECPM. This is due to the strong long-shore wind stress, which coincided with lower sea surface height and high baroclinic instability. The strong positive...

Project plan, Hazardous Materials Management and Emergency Response Training Center: Project 95L-EWT-100

International Nuclear Information System (INIS)

Borgeson, M.E.

1994-01-01

The Hazardous Materials Management and Emergency Response (HAMMER) Training Center will provide for classroom lectures and hands-on practical training in realistic situations for workers and emergency responders who are tasked with handling and cleanup of toxic substances. The primary objective of the HAMMER project is to provide hands-on training and classroom facilities for hazardous material workers and emergency responders. This project will also contribute towards complying with the planning and training provisions of recent legislation. In March 1989 Title 29 Code of Federal Regulations Occupational Safety and Health Administration 1910 Rules and National Fire Protection Association Standard 472 defined professional requirements for responders to hazardous materials incidents. Two general types of training are addressed for hazardous materials: training for hazardous waste site workers and managers, and training for emergency response organizations

Cut-off frequency of magnetostrictive materials based on permeability spectra

International Nuclear Information System (INIS)

Meng Hao; Zhang Tianli; Jiang Chengbao

2012-01-01

The loss behavior and cut-off frequency of TbDyFe alloy and TbDyFe/epoxy composite have been investigated by measuring their permeability spectra. The loss factor of TbDyFe alloy increases exponentially as the frequency goes up, while it is almost unchanged for the TbDyFe/epoxy composite. The loss factor value for the TbDyFe composite is only 4.3% of that for the monolithic TbDyFe alloy at high frequency of 10 kHz under the peak magnetic induction of 10 mT. The cut-off frequency of TbDyFe/epoxy composite is 6800 kHz, 3 orders of magnitude larger than that of TbDyFe alloy. The cut-off frequency is found to be the ferromagnetic resonance frequency and can be calculated from Snoek's law. - Highlights: ► The cut-off frequency of TbDyFe alloy and TbDyFe/epoxy composite has been investigated. ► Permeability spectra are used to study loss behavior and cut-off frequency. ► A mathematic formula is deduced to predict the cut-off frequency. ► TbDyFe/epoxy composite presents high cut-off frequency of 6800 kHz.

Shore protection structures along Kerala coast-low cost alteratives

Digital Repository Service at National Institute of Oceanography (India)

DineshKumar, P.K.; Jasanto, P.K.; Sankaranarayanan, V.N.

Several studies over the last two decades on low cost shore protection measures are reviewed to have an integrated profile with a point on application to the sheltered coasts of Kerala. It is emphasised that these alternative are generally...

The Technical and Business Analysis of Using Shore Power Connection in The Port of Hamburg

Directory of Open Access Journals (Sweden)

Devi Hotnauli Samosir

2017-01-01

Full Text Available In port, when the ship is berthing the loading, unloading, and hospitality activity is using auxiliary engine. The combustion of marine fuels is a major contributor to air pollution, the air pollution is released 400 km around the port area. The impacts of the pollution are respiratory, health, and the environment around ports. Study indicates 60.000 of cardiopulmonary mortalities caused by ship air emission. Ship emission represents 3% of global CO2, 15% of global NOx, and 6% of global SOx emission. Because of that Hamburg Port is released the shore power facilities in July 2015 with idea of smart port and use the renewable energy such as wind turbine and solar panel compliance with IEC-ISO-IEEE 8005-1. In this bachelor thesis, the cost and also the condition between shore power and auxiliary engine will be analyzed and compared to find the most economical between shore power facilities and ship’s auxiliary engine. Shore power facilities in Hamburg are provided by SIEMENS with SIHARBOR and use a robot arm by Stemman Technik as the cable management system. The goal of this thesis is developed calculation tool to see the cost comparison and also the emission. And from the calculation tool the shore power is reducing the emission by 100% because of using the renewable energy and become economical than using auxiliary engine, it can save up to €1000. The other benefits  are ship owner can save maintenance of their auxiliary engine and also saved the file. It shows that the shore power is a proven technology to reduce the emission and saved berth cost.

Cross-shore redistribution of nourished sand near a breaker bar

DEFF Research Database (Denmark)

Jacobsen, Niels Gjøl; Fredsøe, Jørgen

2014-01-01

the Engelund and Fredsøe deterministic concept. The methodology is as follows: a Dean/Bruun equilibrium profile is exposed to regular waves (chosen as H = 1.3 m and T = 4.8 s). These waves will form bars on the Dean/Bruun equilibrium profile, and the wave impact is continued until a quasi-steady behavior...... over the profile is consider as a means of imposing the net recirculation resulting from longshore nonuniformities or the impact of wind-induced shear stresses. The impact of wave height, irregularity in incident waves, and the size of the sediment grains on the cross-shore distribution of suspended...... bar can have both destructive and protective impacts on the original shoreward-located cross-shore profile....

Observations of inner shelf cross-shore surface material transport adjacent to a coastal inlet in the northern Gulf of Mexico

Science.gov (United States)

Roth, Mathias K.; MacMahan, Jamie; Reniers, Ad; Özgökmen, Tamay M.; Woodall, Kate; Haus, Brian

2017-04-01

Motivated by the Deepwater Horizon oil spill, the Surfzone and Coastal Oil Pathways Experiment obtained Acoustic Doppler Current Profiler (ADCP) Eulerian and GPS-drifter based Lagrangian "surface" (Mexico to describe the influence of small-scale river plumes on surface material transport pathways in the nearshore. Lagrangian paths are qualitatively similar to surface pathlines derived from non-traditional, near-surface ADCP velocities, but both differ significantly from depth-averaged subsurface pathlines. Near-surface currents are linearly correlated with wind velocities (r =0.76 in the alongshore and r =0.85 in the cross-shore) at the 95% confidence level, and are 4-7 times larger than theoretical estimates of wind and wave-driven surface flow in an un-stratified water column. Differences in near-surface flow are attributed to the presence of a buoyant river plume forced by winds from passing extratropical storms. Plume boundary fronts induce a horizontal velocity gradient where drifters deployed outside of the plume in oceanic water routinely converge, slow, and are re-directed. When the plume flows west parallel to the beach, the seaward plume boundary front acts as a coastal barrier that prevents 100% of oceanic drifters from beaching within 27 km of the inlet. As a result, small-scale, wind-driven river plumes in the northern Gulf of Mexico act as coastal barriers that prevent offshore surface pollution from washing ashore west of river inlets.

Chemical free device fabrication of two dimensional van der Waals materials based transistors by using one-off stamping

International Nuclear Information System (INIS)

Lee, Young Tack; Choi, Won Kook; Hwang, Do Kyung

2016-01-01

We report on a chemical free one-off imprinting method to fabricate two dimensional (2D) van der Waals (vdWs) materials based transistors. Such one-off imprinting technique is the simplest and effective way to prevent unintentional chemical reaction or damage of 2D vdWs active channel during device fabrication process. 2D MoS 2 nanosheets based transistors with a hexagonal-boron-nitride (h-BN) passivation layer, prepared by one-off imprinting, show negligible variations of transfer characteristics after chemical vapor deposition process. In addition, this method enables the fabrication of all 2D MoS 2 transistors consisting of h-BN gate insulator, and graphene source/drain and gate electrodes without any chemical damage.

Seasonally and spatially referenced estimates of recreational shore ...

African Journals Online (AJOL)

A roving creel survey of the recreational shore fishery along the 16.4-km coastline in the Goukamma Marine Protected Area on the south coast of South Africa was conducted from 2009 to 2011. Some 838 patrols were stratified equally among months, areas and years, but intentionally biased towards weekends. Angler ...

Optimizing experimental parameters for the projection requirement in HAADF-STEM tomography

International Nuclear Information System (INIS)

Aveyard, R.; Zhong, Z.; Batenburg, K.J.; Rieger, B.

2017-01-01

Highlights: • The extent to which HAADF-STEM meets the projection requirement has been studied. • Multislice simulations used to model beam propagation and study signal linearity. • Propagation in crystalline and amorphous materials considered. • Optimal experimental set-up for the projection requirement is discussed. - Abstract: Tomographic reconstruction algorithms offer a means by which a tilt-series of transmission images can be combined to yield a three dimensional model of the specimen. Conventional reconstruction algorithms assume that the measured signal is a linear projection of some property, typically the density, of the material. Here we report the use of multislice simulations to investigate the extent to which this assumption is met in HAADF-STEM imaging. The use of simulations allows for a systematic survey of a range of materials and microscope parameters to inform optimal experimental design. Using this approach it is demonstrated that the imaging of amorphous materials is in good agreement with the projection assumption in most cases. Images of crystalline specimens taken along zone-axes are found to be poorly suited for conventional linear reconstruction algorithms due to channelling effects which produce enhanced intensities compared with off-axis images, and poor compliance with the projection requirement. Off-axis images are found to be suitable for reconstruction, though they do not strictly meet the linearity requirement in most cases. It is demonstrated that microscope parameters can be selected to yield improved compliance with the projection requirement.

Optimizing experimental parameters for the projection requirement in HAADF-STEM tomography

Energy Technology Data Exchange (ETDEWEB)

Aveyard, R., E-mail: r.a.aveyard@tudelft.nl [Department of Imaging Physics, Delft University of Technology, 2628CJ Delft (Netherlands); Zhong, Z.; Batenburg, K.J. [Centrum Wiskunde and Informatica, Science Park 123, NL-1098 XG Amsterdam (Netherlands); Rieger, B., E-mail: b.rieger@tudelft.nl [Department of Imaging Physics, Delft University of Technology, 2628CJ Delft (Netherlands)

2017-06-15

Highlights: • The extent to which HAADF-STEM meets the projection requirement has been studied. • Multislice simulations used to model beam propagation and study signal linearity. • Propagation in crystalline and amorphous materials considered. • Optimal experimental set-up for the projection requirement is discussed. - Abstract: Tomographic reconstruction algorithms offer a means by which a tilt-series of transmission images can be combined to yield a three dimensional model of the specimen. Conventional reconstruction algorithms assume that the measured signal is a linear projection of some property, typically the density, of the material. Here we report the use of multislice simulations to investigate the extent to which this assumption is met in HAADF-STEM imaging. The use of simulations allows for a systematic survey of a range of materials and microscope parameters to inform optimal experimental design. Using this approach it is demonstrated that the imaging of amorphous materials is in good agreement with the projection assumption in most cases. Images of crystalline specimens taken along zone-axes are found to be poorly suited for conventional linear reconstruction algorithms due to channelling effects which produce enhanced intensities compared with off-axis images, and poor compliance with the projection requirement. Off-axis images are found to be suitable for reconstruction, though they do not strictly meet the linearity requirement in most cases. It is demonstrated that microscope parameters can be selected to yield improved compliance with the projection requirement.

Research and development of utilization system of photovoltaic power generation. R and D of stand-alone power system (for marine use)

Energy Technology Data Exchange (ETDEWEB)

1986-08-01

This is an annual report for 1985 for NEDO -contracted project. The project aims at establishing an efficient, stable power generating solar cell technology and developing a power supply system for the ocean development. In order to install an independent off-shore power supply system for the marine ranch at Kamiura, Oita Prefecture, a frame berge was constructed on the Tsuinoura pier and an annularly arranged disc type solar cell with the center tapered at 4 % in an umbrella shape towards outside. Designed capacity was 10 KWp maximum output, and total 11 KVA (1 KVA at heavy duty load and 10 KVA at sun-shining load). The power source system consists of units for solar cell, power storage, control, orthogonal conversion, and of various loads. The system can make a normal observation by a wireless data transmission from off-shore onto the ground. (2 figs, 4 tabs)

NOAA TIFF Image - 3 m Backscatter Mosaic of the south west shore (La Parguera) of Puerto Rico, Project NF-06-03, 2006, UTM 19 WGS84

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a 3 meter resolution backscatter mosaic of the south west shore (La Parguera) of Puerto Rico. NOAA's NOS/NCCOS/CCMA Biogeography Team, in...

Predictive Modelling to Identify Near-Shore, Fine-Scale Seabird Distributions during the Breeding Season.

Science.gov (United States)

Warwick-Evans, Victoria C; Atkinson, Philip W; Robinson, Leonie A; Green, Jonathan A

2016-01-01

During the breeding season seabirds are constrained to coastal areas and are restricted in their movements, spending much of their time in near-shore waters either loafing or foraging. However, in using these areas they may be threatened by anthropogenic activities such as fishing, watersports and coastal developments including marine renewable energy installations. Although many studies describe large scale interactions between seabirds and the environment, the drivers behind near-shore, fine-scale distributions are not well understood. For example, Alderney is an important breeding ground for many species of seabird and has a diversity of human uses of the marine environment, thus providing an ideal location to investigate the near-shore fine-scale interactions between seabirds and the environment. We used vantage point observations of seabird distribution, collected during the 2013 breeding season in order to identify and quantify some of the environmental variables affecting the near-shore, fine-scale distribution of seabirds in Alderney's coastal waters. We validate the models with observation data collected in 2014 and show that water depth, distance to the intertidal zone, and distance to the nearest seabird nest are key predictors in the distribution of Alderney's seabirds. AUC values for each species suggest that these models perform well, although the model for shags performed better than those for auks and gulls. While further unexplained underlying localised variation in the environmental conditions will undoubtedly effect the fine-scale distribution of seabirds in near-shore waters we demonstrate the potential of this approach in marine planning and decision making.

Predictive Modelling to Identify Near-Shore, Fine-Scale Seabird Distributions during the Breeding Season.

Directory of Open Access Journals (Sweden)

Victoria C Warwick-Evans

Full Text Available During the breeding season seabirds are constrained to coastal areas and are restricted in their movements, spending much of their time in near-shore waters either loafing or foraging. However, in using these areas they may be threatened by anthropogenic activities such as fishing, watersports and coastal developments including marine renewable energy installations. Although many studies describe large scale interactions between seabirds and the environment, the drivers behind near-shore, fine-scale distributions are not well understood. For example, Alderney is an important breeding ground for many species of seabird and has a diversity of human uses of the marine environment, thus providing an ideal location to investigate the near-shore fine-scale interactions between seabirds and the environment. We used vantage point observations of seabird distribution, collected during the 2013 breeding season in order to identify and quantify some of the environmental variables affecting the near-shore, fine-scale distribution of seabirds in Alderney's coastal waters. We validate the models with observation data collected in 2014 and show that water depth, distance to the intertidal zone, and distance to the nearest seabird nest are key predictors in the distribution of Alderney's seabirds. AUC values for each species suggest that these models perform well, although the model for shags performed better than those for auks and gulls. While further unexplained underlying localised variation in the environmental conditions will undoubtedly effect the fine-scale distribution of seabirds in near-shore waters we demonstrate the potential of this approach in marine planning and decision making.

Project of positron source at the U-120 Cyclotron, Bucharest. Status report

International Nuclear Information System (INIS)

Racolta, P.M.; Popa Simil, L.; Voiculescu, Dana; Miron, N.

1999-01-01

To extend the applications with our U-120 Cyclotron we started a project of off-line and on-line positron sources produced at the cyclotron. This machine may be successfully used for producing positron sources with few day half-life for off-line positron studies (eg. 48 V), or a cyclotron on-line intense positron beam (eg. 27 Si) with a variable energy for various materials study experiments, enough to cover a depth range from few micrometers down to tens of nanometers. Until now, using a 48 V positron source we performed experiments for determination of the Doppler broadening of the 511 KeV peak for different materials (copper, lead, indium). This research is carrier out on a cooperation agreement between IFIN-HH Bucharest and LISES-Chisinau. The positron source project is now in its initial stage. This stage consists of the experiments on the off-line version using positron sources produced in the cyclotron (eg. 48 V, 22 Na), to develop experience with detection chains (Doppler broadening and positron annihilation lifetime spectroscopy), to choose proper experiments in order to select moderator materials (W, Mo, Pt, etc.) and to study and design the different versions for the on-line production of positrons with the cyclotron. Slow positrons are valuable tools in atomic physics, materials science and solid state physics research. The controlled energy beam facility can be used to probe defects in metals, to study Fermi surfaces and materials surfaces and interfaces and to obtain detailed information about the electronic structure of materials. The aim of this project is to perform applications in the semiconductor industry, for coating materials, polymers, biomaterials etc. (authors)

Project of positron source at the U-120 cyclotron Bucharest status report

International Nuclear Information System (INIS)

Racolta, P.M.; Simil Popa, L.; Voiculescu, Dana; Miron, N.

2000-01-01

To extend the applications with our U-120 Cyclotron we started a project of off-line positron sources produced at the cyclotron. This machine may be successfully used for producing positron sources with few day half-life for off-line positron studies (e.g. 48 V), or a cyclotron on-line intense positron beam (e.g. 27 Si) with a variable energy for various materials study experiments, enough to cover a depth range from a few micrometers down to tens of nanometers. Until now, using a 48 V positron source we performed experiments for determination of the Doppler broadening of the 511 keV peak for different materials (copper, lead, indium). This research is carried out on a cooperation agreement between IFIN-HH Bucharest and LISES-Chisinau. The positron source project is now in its initial stage. This stage consists of the experiments on the off-line version using positron source produced in the cyclotron (e.g. 48 V, 22 Na), to develop experience with detection chains (Doppler broadening and positron annihilation lifetime spectroscopy) to choose proper experiments in order to select moderator materials (W, Mo, Pt, etc.) and to study and design the different versions for the on-line positron production by cyclotron. Slow positrons are valuable tools in atomic physics, materials science and solid state physics research. The controlled energy beam facility can be used to probe defects in metals, to study Fermi surfaces and materials surfaces and interfaces and to obtained detailed information about electronic structures of materials. The aim of this project is to perform applications in the semiconductor industry, for coating materials, polymers, biomaterials, etc. (authors)

Great Lakes O shore Wind Project: Utility and Regional Integration Study

Energy Technology Data Exchange (ETDEWEB)

Sajadi, Amirhossein [Case Western Reserve Univ., Cleveland, OH (United States); Loparo, Kenneth A. [Case Western Reserve Univ., Cleveland, OH (United States); D' Aquila, Robert [General Electric (GE), Albany, NY (United States); Clark, Kara [National Renewable Energy Lab. (NREL), Golden, CO (United States); Waligorski, Joseph G. [FirstEnergy, Akron, OH (United States); Baker, Scott [PJM Interconnection, Audubon, PA (United States)

2016-06-30

This project aims to identify transmission system upgrades needed to facilitate offshore wind projects as well as operational impacts of offshore generation on operation of the regional transmission system in the Great Lakes region. A simulation model of the US Eastern Interconnection was used as the test system as a case study for investigating the impact of the integration of a 1000MW offshore wind farm operating in Lake Erie into FirstEnergy/PJM service territory. The findings of this research provide recommendations on offshore wind integration scenarios, the locations of points of interconnection, wind profile modeling and simulation, and computational methods to quantify performance, along with operating changes and equipment upgrades needed to mitigate system performance issues introduced by an offshore wind project.

Study of physiological and genotoxic status of fish populations of Azerbaijan shore of the Caspian sea

International Nuclear Information System (INIS)

Kasimov, R.Yu.; Palatnikov, G.M.; Mekhtiev, A.A.

2005-01-01

Full text : According to the studies conducted on Ecotox program of Caspian Ecological program, littoral waters of Azerbaijan and Iran are characterized with high content of heavy metals and organic compounds. Actually, all these substances are not just toxicants but mutagens as well. Taking into account these considerations, it appears important to be aware of physiological and genotoxic status of fish populations dwelling along Azerbaijan shore of the Caspian Sea for present time. The purpose of proposed project is collecting data concerning actual physiological and genotoxic status of fish populations dwelling in the littoral zone of Azerbaijan shore of the Caspian Sea. That will present the real picture of ecological status of ichtyofauna in Azerbaijan sector of the Caspian Sea and give grounds to conduct comparative analysis of changes while conducting all kinds of activities in the sea with the data provided within this project's frames. For this purpose we offer to conduct studies of fish populations along Azerbaijan littoral zone of the Caspian Sea beginning from north ones, sharing all shore into 5-6 points where fish catches should be done. Not less than 5 specimens of attached-dwelling fish, for instance gobies, are planned to catch in each of defined points. Blood samples for genotoxic analysis and samples of muscles, livers and gills for immunochemical and histopathological analysis will be taken. Along with this in these points the analysis of water - oxygen content, ph, salinity, temperature will be realized. Physiological status of fish will be evaluated by determination of serotonin-modulating protein content in ELISA-test. This analysis gives precise estimation of serotonergic system status that is very sensitive to adverse conditions. The second test - histopathological tissue studies gives grounds to determine functional status of internal organs of caught fish. The third test - micronuclei counting in erythrocytes. This technique allows

Take Off! Aeronautics and Aviation Science: Careers and Opportunities

Science.gov (United States)

1998-01-01

Funded by National Aeronautic and Space Administration's High Performance Computing and Communications/ Learning Technologies Project (HPCC/LTP) Cooperative Agreement, Aeronautics and aviation Science: Careers and Opportunities was operative from July 1995 through July 1998. This project operated as a collaboration with Massachusetts Corporation for Educational Telecommunications, the Federal Aviation Administration, Bridgewater State College and four targeted "core sites" in the greater Boston area: Dorchester, Malden, East Boston and Randolph. In its first and second years, a video series with a participatory website on aeronautics and aviation science was developed and broadcast via "live, interactive" satellite feed. Accompanying teacher and student supplementary instructional materials for grades 6-12 were produced and disseminated by the Massachusetts Corporation for Educational Telecommunications (MCET). In year three, the project team redesigned the website, edited 14 videos to a five part thematic unit, and developed a teacher's guide to the video and web materials supplement for MAC and PC platforms, aligned with national standards. In the MCET grant application it states that project Take Off! in its initial phase would recruit and train teachers at "core" sites in the greater Boston area, as well as opening participation to other on-line users of MCET's satellite feeds. "Core site" classrooms would become equipped so that teachers and students might become engaged in an interactive format which aimed at not only involving the students during the "live" broadcast of the instructional video series, but which would encourage participation in electronic information gathering and sharing among participants. As a Take Off! project goal, four schools with a higher than average proportion of minority and underrepresented youth were invited to become involved with the project to give these students the opportunity to consider career exploration and development

Problems in future negotiations for a treaty on the cut-off of fissile material for nuclear weapons

International Nuclear Information System (INIS)

Schaper, A.

1999-01-01

A treaty to end the production of fissile material for nuclear weapons, the so-called cutoff, is one of the most important next steps on the disarmament agenda.' But meanwhile, the Conference on Disarmament (CD) is deadlocked, and confidence in negotiations taking place in the near future is replaced by bewilderment at the inaction. The underlying conflict of the Comprehensive Test Ban Treaty (CTBT) negotiations can be summarized as nuclear disarmament versus nuclear nonproliferation. The same conflict is now blocking progress with negotiations in the CD on the Fissile Material Cut-off Treaty (FMCT). Nevertheless, the cut-off would be the major policy driver to insert transparency and irreversibility into the disarmament process,' and we need to harness all our efforts to overcome the current difficulties. The CTBT can be regarded as a tool to cap the qualitative nuclear arms race, for example to hinder the future development of qualitatively new nuclear explosives, and an FMCT can be seen as its quantitative counterpart, capping the amount of material available for new nuclear weapons. The complex questions involve political, technical, legal, and economic aspects and constitute a challenge for diplomats and decision makers

A GIS-model for predicting the impact of climate change on shore erosion in hydroelectric reservoirs

International Nuclear Information System (INIS)

Penner, L.A.; Zimmer, T.A.M.; St Laurent, M.

2008-01-01

Shoreline erosion affects inland lakes and hydroelectric reservoirs in several ways. This poster described a vector-based geographic information system (GIS) model designed to predict changes in shore zone geometry, top-of-bluff recession, and eroded sediment volumes. The model was designed for use in Manitoba Hydro's reservoirs in northern Manitoba, and simulated near-shore downcutting and bank recession caused by wind-generated waves. Parameters for the model included deep water wave energy, and water level fluctuations. Effective wave energy was seen as a function of the water level fluctuation range, wave conditions, and near-shore slope. The model was validated by field monitoring studies that included repeated shore zone transect surveys and sediment coring studies. Results of the study showed that the model provides a systematic method of predicting potential changes in erosion associated with climatic change. The volume and mass of eroded sediment predicted for the different modelling scenarios will be used as input data for future sedimentation models. tabs., figs

Off-balance-sheet financing to the refining industry

International Nuclear Information System (INIS)

Jenkins, J.H.

1995-01-01

Off-balance-sheet lending, or project finance, is becoming an increasingly popular means of capital formation in the refining and petrochemical industries. However, these transactions are substantially different from traditional corporate lending, and the demands placed on the borrower to examine, substantiate, and support the project are far greater. The following paper examines ways in which international banks and other lenders evaluate off-balance-sheet refinery projects and suggests ways to better structure financial representations

Asphalt Roofing Shingles Into Energy Project Summary Report

Energy Technology Data Exchange (ETDEWEB)

Jameson, Rex, PE

2008-04-28

Based on a widely cited September, 1999 report by the Vermont Agency of Natural Resources, nearly 11 million tons of asphalt roofing shingle wastes are produced in the United States each year. Recent data suggests that the total is made up of about 9.4 million tons from roofing tear-offs and about 1.6 million tons from manufacturing scrap. Developing beneficial uses for these materials would conserve natural resources, promote protection of the environment and strengthen the economy. This project explored the feasibility of using chipped asphalt shingle materials in cement manufacturing kilns and circulating fluidized bed (CFB) boilers. A method of enhancing the value of chipped shingle materials for use as fuel by removing certain fractions for use as substitute raw materials for the manufacture of new shingles was also explored. Procedures were developed to prevent asbestos containing materials from being processed at the chipping facilities, and the frequency of the occurrence of asbestos in residential roofing tear-off materials was evaluated. The economic feasibility of each potential use was evaluated based on experience gained during the project and on a review of the well established use of shingle materials in hot mix asphalt. This project demonstrated that chipped asphalt shingle materials can be suitable for use as fuel in circulating fluidized boilers and cement kilns. More experience would be necessary to determine the full benefits that could be derived and to discover long term effects, but no technical barriers to full scale commercial use of chipped asphalt shingle materials in these applications were discovered. While the technical feasibility of various options was demonstrated, only the use of asphalt shingle materials in hot mix asphalt applications is currently viable economically.

The role of macrobiota in structuring microbial communities along rocky shores

Directory of Open Access Journals (Sweden)

Catherine A. Pfister

2014-10-01

Full Text Available Rocky shore microbial diversity presents an excellent system to test for microbial habitat specificity or generality, enabling us to decipher how common macrobiota shape microbial community structure. At two coastal locations in the northeast Pacific Ocean, we show that microbial composition was significantly different between inert surfaces, the biogenic surfaces that included rocky shore animals and an alga, and the water column plankton. While all sampled entities had a core of common OTUs, rare OTUs drove differences among biotic and abiotic substrates. For the mussel Mytilus californianus, the shell surface harbored greater alpha diversity compared to internal tissues of the gill and siphon. Strikingly, a 7-year experimental removal of this mussel from tidepools did not significantly alter the microbial community structure of microbes associated with inert surfaces when compared with unmanipulated tidepools. However, bacterial taxa associated with nitrate reduction had greater relative abundance with mussels present, suggesting an impact of increased animal-derived nitrogen on a subset of microbial metabolism. Because the presence of mussels did not affect the structure and diversity of the microbial community on adjacent inert substrates, microbes in this rocky shore environment may be predominantly affected through direct physical association with macrobiota.

Understanding nutrients in the Chesapeake Bay watershed and implications for management and restoration: the Eastern Shore

Science.gov (United States)

Ator, Scott W.; Denver, Judith M.

2015-03-12

The Eastern Shore includes only a small part of the Chesapeake Bay watershed, but contributes disproportionately large loads of the excess nitrogen and phosphorus that have contributed to ecological and economic degradation of the bay in recent decades. Chesapeake Bay is the largest estuary in the United States and a vital ecological and economic resource. The bay and its tributaries have been degraded in recent decades by excessive nitrogen and phosphorus in the water column, however, which cause harmful algal blooms and decreased water clarity, submerged aquatic vegetation, and dissolved oxygen. The disproportionately large nitrogen and phosphorus yields from the Eastern Shore to Chesapeake Bay are attributable to human land-use practices as well as natural hydrogeologic and soil conditions. Applications of nitrogen and phosphorus compounds to the Eastern Shore from human activities are intensive. More than 90 percent of nitrogen and phosphorus reaching the land in the Eastern Shore is applied as part of inorganic fertilizers or manure, or (for nitrogen) fixed directly from the atmosphere in cropland. Also, hydrogeologic and soil conditions promote the movement of these compounds from application areas on the landscape to groundwater and (or) surface waters, and the proximity of much of the Eastern Shore to tidal waters limits opportunities for natural removal of these compounds in the landscape. The Eastern Shore only includes 7 percent of the Chesapeake Bay watershed, but receives nearly twice as much nitrogen and phosphorus applications (per area) as the remainder of the watershed and yields greater nitrogen and phosphorus, on average, to the bay. Nitrogen and phosphorus commonly occur in streams at concentrations that may adversely affect aquatic ecosystems and have increased in recent decades.

Selected fishery and population parameters of eight shore-angling ...

African Journals Online (AJOL)

Selected fishery and population parameters of eight shore-angling species in the ... Five different estimates of natural mortality (M), and the coefficients of ... for the most abundant species, blacktail Diplodus capensis, with a mean CPUE of 0.252 ... Keywords: catch per unit effort; fisheries management; marine protected area; ...

NOAA TIFF Image - 3 m Backscatter Mosaic of the north shore of St. Croix, U.S. Virgin Islands, Project NF-06-03, 2006, UTM 20 WGS84

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a 3 meter resolution backscatter mosaic of the north shore of St. Croix, US Virgin Islands. NOAA's NOS/NCCOS/CCMA Biogeography Team, in...

Critical Factors Influencing Viability of Wave Energy Converters in Off-Grid Luxury Resorts and Small Utilities

Directory of Open Access Journals (Sweden)

Aksel Botne Sandberg

2016-12-01

Full Text Available This paper examines technical and non-technical factors that are critical to the viability of commercialization of wave energy converters in off-grid luxury resorts and small utilities. Critical factors are found by investigating Levelized Cost of Energy, and using the tools PESTEL and Porter’s five competitive forces. Identified factors are then applied on three business cases to investigate their impact on viability. The results show that one of the main challenges facing off-grid commercialization is the few wave energy converter units installed per location, negating the economy of scale that large wave energy farms count on to achieve competitive cost levels. In addition, factors like current cost of energy, available wave resources, distance from shore, infrastructure, supply chain logistics, and electricity demand are found to be deciding factors for viability. Despite these challenges, it is found that there are potentially viable off-grid business cases for commercialization of wave energy converters.

Design of a gravity corer for near shore sediment sampling

Digital Repository Service at National Institute of Oceanography (India)

Bhat, S.T.; Sonawane, A.V.; Nayak, B.U.

For the purpose of geotechnical investigation a gravity corer has been designed and fabricated to obtain undisturbed sediment core samples from near shore waters. The corer was successfully operated at 75 stations up to water depth 30 m. Simplicity...

Innovations in Advanced Materials and Metals Manufacturing Project (IAM2)

Energy Technology Data Exchange (ETDEWEB)

Scott, Elizabeth [Columbia River Economic Development Council, Vancouver, WA (United States)

2017-01-06

This project, under the Jobs and Innovation Accelerator Challenge, Innovations in Advanced Materials and Metals Manufacturing Project, contracted with Cascade Energy to provide a shared energy project manager engineer to work with five different companies throughout the Portland metro grant region to implement ten energy efficiency projects and develop a case study to analyze the project model. As a part of the project, the energy project manager also looked into specific new technologies and methodologies that could change the way energy is consumed by manufacturers—from game-changing equipment and technology to monitor energy use to methodologies that change the way companies interact and use their machines to reduce energy consumption.

Repair-welding technology of irradiated materials - WIM project

International Nuclear Information System (INIS)

Nakata, K.; Oishi, M.

1998-01-01

A new project on the development of repair-welding technology for core internals and reactor (pressure) vessel, consigned by the Ministry of International Trade and Industry (MITI), has been started from October 1997. The objective of the project is classified into three points as follows: (1) to develop repair-welding techniques for neutron irradiated materials, (2) to prove the availability of the techniques for core internals and reactor (pressure) vessel, and (3) to recommend the updated repair-welding for the Technical Rules and Standards. Total planning, neutron irradiation, preparation of welding equipment are now in progress. The materials are austenitic stainless steels and a low alloy steel. Neutron irradiation is performed using test reactors. In order to suppress the helium aggregation along grain boundaries, low heat input welding techniques, such as laser, low heat input TIG and friction weldings, will be applied. (author)

For easy sleep along the shore: Making hazard warnings more ...

International Development Research Centre (IDRC) Digital Library (Canada)

2011-01-27

Jan 27, 2011 ... For easy sleep along the shore: Making hazard warnings more effective ... to alert the public; local leaders trained to make the right decisions; .... and the sirens sound, its people will have the motivation and the capacity to act?

Decapod larvae distribution and species composition off the southern Portuguese coast

Science.gov (United States)

Pochelon, Patricia N.; Pires, Rita F. T.; Dubert, Jesús; Nolasco, Rita; Santos, A. Miguel P.; Queiroga, Henrique; dos Santos, Antonina

2017-12-01

For decapod crustaceans, the larval phase is the main responsible for dispersal, given the direct emission from adult habitats into the water column. Circulation patterns and behavioural mechanisms control the dispersal distance and connectivity between different areas. Information on larval distribution and abundance is required to predict the size and location of breeding populations, and correctly manage marine resources. Spatial distribution and abundance data of decapod larvae, and environmental parameters were assessed in winter surveys off the southern Portuguese coast. To better understand the oceanic structures driving larval distribution patterns, in situ physical parameters were measured and a hydrodynamical model used. Inter-annual, cross-shore and alongshore differences on decapod larvae distribution were found. Brachyuran crabs dominated the samples and similar taxa composition was observed in the most dynamic areas. Coastal taxa dominated the nearshore survey and were almost absent in the more offshore one, that registered much lower abundances. An upwelling front allowed a clear cross-shore species separation, also evident in the abundance values and number of taxa. Hydrodynamical conditions and adult habitats were the main factors explaining the observed patterns. Important missing information to understand the distribution patterns of decapod larval communities and the mechanisms behind them is given for the region.

Near-Shore Floating Wave Energy Converters

DEFF Research Database (Denmark)

Ruol, Piero; Zanuttigh, Barbara; Martinelli, Luca

2011-01-01

and transmission characteristics are approximated to functions of wave height, period and obliquity. Their order of magnitude are 20% and 80%, respectively. It is imagined that an array of DEXA is deployed in front of Marina di Ravenna beach (IT), a highly touristic site of the Adriatic Coast. Based on the CERC......Aim of this note is to analyse the possible application of a Wave Energy Converter (WEC) as a combined tool to protect the coast and harvest energy. Physical model tests are used to evaluate wave transmission past a near-shore floating WEC of the wave activated body type, named DEXA. Efficiency...

Preferences for Management of Near-Shore Marine Ecosystems: A Choice Experiment in New Zealand

Directory of Open Access Journals (Sweden)

Sophal Chhun

2013-09-01

Full Text Available There is considerable interest in New Zealand in establishing “Customary Management Areas” (taiāpure and mātaitai and Marine Reserves to support Māori cultural practices and restore declining biodiversity and fish stocks. Allocation of near-shore marine areas for these management systems potentially benefits the larger public, but it has often been vigorously opposed by recreational and commercial fishers. This paper reports estimates of the relative values held by the public toward four potentially conflicting uses of near-shore marine areas. These estimates come from a web-based choice survey completed by 1055 respondents recruited from throughout New Zealand. The response rate was especially high at 60%. We present results weighted to the characteristics of the population and test the results against a variety of well-known sources of survey bias. Scenario development suggests that some reallocation of near-shore marine areas to any of the management systems under discussion alternative to the status quo is likely to yield a welfare gain. A combination of marine reserves and taiāpure is most preferred. The exercise supports the use of discrete choice experiments to provide crucial information about difficult-to-quantify public values for aspects of management of near-shore marine areas, such as proposed taiāpure, mātaitai, or marine reserves.

Solid Waste Operations Complex W-113: Project cost estimate. Preliminary design report. Volume IV

International Nuclear Information System (INIS)

1995-01-01

This document contains Volume IV of the Preliminary Design Report for the Solid Waste Operations Complex W-113 which is the Project Cost Estimate and construction schedule. The estimate was developed based upon Title 1 material take-offs, budgetary equipment quotes and Raytheon historical in-house data. The W-113 project cost estimate and project construction schedule were integrated together to provide a resource loaded project network

Hearing in the matter of an application by Erie Shores Wind Farm Limited Partnership for an Order granting leave to construct transmission facilities to connect a wind farm to the transmission facilities of Hydro One Network Inc.[In the matter of the Ontario Energy Board Act, 1998, S.O. 1998, c. 15, Schedule B

Energy Technology Data Exchange (ETDEWEB)

Kaiser, G.; Vlahos, P.; Betts, B.

2005-06-20

This document presents the transcripts of an Ontario Energy Board hearing regarding an application filed by Erie Shores Wind Farm Limited to construct transmission facilities that will connect Erie Shores' wind farm on the north shore of Lake Erie to the transmission facilities of Hydro One Network. This document presents the examinations by representatives of the Board Counsel, Erie Shores Wind Farm Limited Partnership, Hydro One Networks Inc., Ontario's Independent Electricity System Operator and intervenors. Erie Shores is a limited partnership between AIM PowerGen Corporation and Clean Power Income Fund. The proposed wind farm is to be located along the north shore of Lake Erie, covering about 14,000 acres of farmland in the townships of Bayham, Malahide and Norfolk County. It consists of 66 wind turbines with a net output of 99 MW. The construction of transmission facilities would involve the construction of a new transformer station with a 34.5/115 kV transformer, a capacitor bank, switch gear, and space for a future transformer. It would also include a transmission line from the Port Burwell transmission station to Hydro One's circuits at Cranberry Junction near Tillsonburg. Erie Shores also proposes to construct 27 km of the transmission line within the existing Otter Valley utility corridor, 3 km along the active Canadian Pacific Rail corridor, and over certain private lands located south of Tillsonburg Junction. Erie Shores was one of the successful bidders that has entered into a 20-year renewable energy supply contract with the Ontario Electricity Financial Corporation. The Board considers that the project is in the public interest and granted approval for the project, subject to certain conditions regarding communications, monitoring and reporting requirements. 2 refs., 1 appendix.

Validation of on-site job-built guardrails with shoring jack as supports

Directory of Open Access Journals (Sweden)

Lan, A.

2014-06-01

Full Text Available To protect themselves against fall hazards in a slab-column frame, workers use the row of shoring jacks installed at 1 m from the edge as supports for on-site built guardrails. Inspectors of the Quebec Workers Compensation Board (Commission de la santé et de la sécurité du travail (CSST have expressed concern about the safety and compliance of these on-site built guardrails with the Quebec Safety Code for the Construction Industry (S-2.1, r.4. Some workers have also inquired if the shoring jack can be used as an anchor for a travel restraint system. The present study describes how an evaluation method and a test protocol have been used to verify if guardrails built on-site, with shoring jacks as supports, are safe and comply with the requirements of S-2.1, r.4 and if the shoring jack can be used as an anchor point for a travel restraint system. The results of the study show 1 guardrails built on site with shoring jacks as supports, are safe and comply with S-2.1, r.4 and 2 shoring jacks used as supports for guardrails must not be used as an anchor for a travel restraint system.Para la protección contra el peligro de caída en altura durante la ejecución de la estructura de un edificio, los trabajadores utilizan puntales acodalados a dos forjados y situados a 1 metro del borde de forjado como apoyo de las barandillas de seguridad. Inspectores de la Quebec Workers Compensation Board (Commision de la santé et de la sécurité du travail (CSST han expresado su preocupación por la seguridad y el cumplimiento de estos sistemas de protección en la construcción conforme al Código de Seguridad de Quebec para la industria de la construcción (S-2.1, R.6. Así mismo algunos trabajadores han mostrado su inquietud sobre la utilización de los puntales como sistemas para limitar el desplazamiento. El presente estudio describe un método de evaluación y un procedimiento de ensayo que se han utilizado para verificar si las barandillas de seguridad

Low crested coastal defence structures on the Catalan coast of the Mediterranean Sea: how they compare with natural rocky shores

Directory of Open Access Journals (Sweden)

Esperança Gacia

2007-06-01

Full Text Available Erosion problems in coastal zones are increasingly threatening Mediterranean shores. In tourist areas such as the Catalan coast, there has been an increasing demand for the construction of low crested structures (LCS to maintain beaches for recreational purposes. We studied the composition of the biota from three LCS and compared it with that of nearby natural rocky shores. Our purpose was to assess the composition of the communities growing on the LCS at a regional scale and to explore potential patterns of community composition in LCS in relation to the nature of the surrounding coast (i.e. sand or rocky shore, distance from natural hard-bottom communities and orientation of the blocks within the structure. The communities growing on the LCS were similar to those from nearby natural shores but the diversity and the number of taxa was always lower. Sixty to 95% of the species present on natural rocky shores grew on LCS, and differences in the number of taxa between the natural and the artificial substrates increased with increasing distances between them. On the Catalan coast, LCS act as impoverished rocky shores that never become natural ‘climax’ communities.

Off-shore contamination by I-131 and Cs-137 from the Fukushima Daiichi nuclear power station accident

International Nuclear Information System (INIS)

Pereira, Wagner de Souza; Kelecom, Patrick Vicent; Miyashita, Erika; Universidade Federal Fluminense; Kelecom, Alphonse

2011-01-01

On March 11, 2011 the biggest earthquake ever registered in Japan severed off-site power supply to the Fukushima Daiichi Nuclear Power Station. Backup diesel generators began providing electricity to pumps circulating coolant to the reactors, but were knocked out by a large tsunami and the nuclear site lost the ability to maintain proper reactor cooling. This was the beginning of a huge nuclear accident that was assigned an INES maximum rating of 7. On March 21, Japanese authorities reported that the Tokyo Electric Power Company (TEPCO) had detected radioactive materials in seawater. Radioactivity started to be measured by the Japan Atomic Energy Agency every two days in sea water from eight locations, 30km from the coastline. I-131 and Cs-137 were analyzed among other radionuclides. It is the aim of this paper to gather all this information and to discuss the evolution of the radioactive marine contamination during the first month of the accident. Results indicate for surface seawater concentrations ranging from 24.9 to 161.0 Bq/L for I-131 and 11.2 to 186.0 Bq/L for Cs-137, and for deep waters of 1.59-15.0 Bq/L (I-131) and 0.0-11.4 Bq/L (Cs-137). The I-131 concentrations in superficial waters were at or above Japanese regulatory limits in the first days, then lowered during one week to increase again above limits when TEPCO released contaminated water into the ocean, to finally reach not detectable values the last week of April. With the exception of point 4, on April 15, the Cs-137 levels were always well below regulatory limits. (author)

The extant shore platform stromatolite (SPS facies association: a glimpse into the Archean?

Directory of Open Access Journals (Sweden)

A. Smith

2018-04-01

Full Text Available Shore platform stromatolites (SPS were first noted at Cape Morgan on the south-east African seaboard. Since then they have been found growing discontinuously in rocky peritidal zones along the entire southern African seaboard. They have also been found on the southwest Australian coast, at Giant's Causeway in Northern Ireland, and more recently at Harris on the Scottish Hebridean Atlantic coast. In this paper SPS occurrence and SPS potential as analogues for Precambrian fossil stromatolites, as well as potential stromatolite occurrences in shore platform regions on Mars, are assessed. Sub-horizontal surfaces promote stromatolite development, while tufa develops on cliffs and steep rocky surfaces. Tufa and stromatolites are end members of a spectrum dictated by coastal topography. Extant SPS occur on well indurated shore platforms in high wave energy settings, often around or near headlands. They can be associated with boulder beaches, boulder ridges, storm swash terraces, coastal dunes, and peat bogs. In contrast to other extant stromatolites, SPS are produced primarily by mineral precipitation, although minor trapping and binding stromatolites do occur. From a geological perspective, SPS develop in mildly transgressive siliciclastic settings in various climatic and tidal regimes. We suggest that SPS could be preserved in the geological record as micritic lenses on palaeo-shore platform surfaces. SPS share many features with Precambrian stromatolites and are a valid modern analogue despite the widely different atmospheric and oceanic conditions of the Archean. We suggest that terraces associated with former oceanic or lacustrine flooding surfaces on Mars are potential targets in the search for palaeo-SPS on Mars.

Increasing Shore-based Participation of Scientists & Students in Telepresence-enabled Nautilus Expeditions

Science.gov (United States)

Bell, K. L. C.; Raineault, N.; Carey, S.; Eberli, G. P.; John, B. E.; Cheadle, M. J.; German, C. R.; Mirmalek, Z.; Pallant, A.

2016-02-01

As the US oceanographic research fleet shrinks, reducing seagoing opportunities for scientists and students, remote participation in cruises via telepresence will become increasingly vital. The Nautilus Exploration Program is improving the experience of shoreside participants through the development of new tools and methodologies for connecting them to expeditions in real time increasing accessibility to oceanographic cruises. The Scientist Ashore Program is a network of scientists around the world who participate in Exploration Vessel Nautilus expeditions from their own labs or homes. We have developed a suite of collaboration tools to allow scientists to view video and data in real time, as well as to communicate with ship-based and other shore-based participants to enable remote participation in cruises. Post-cruise, scientists and students may access digital data and biological and geological samples from our partner shore-based repositories: the University of Rhode Island Inner Space Center, Harvard Museum of Comparative Zoology, and URI Marine Geological Samples Lab. We present examples of successful shore-based participation by scientists and students in Nautilus expeditions. In 2013, Drs. Cheadle and John stood watch 24/7 with ten undergraduate and graduate students at the University of Wyoming, recording geologic features and samples, during a cruise to the Cayman Rise. The Straits of Florida & Great Bahama Bank cruise was co-led by Dr. Eberli at the University of Miami in 2014, greatly complementing existing data. That same year, the ISC hosted four early career scientists and their twelve undergraduate students who led dives from shore in collaboration with Dr. Carey, Lead Scientist at sea on the Kick'em Jenny Volcano & the Barbados Mud Volcanoes cruise. In 2015, 12 Scientists Ashore worked in collaboration with the ship-based team on the exploration of Galapagos National Park, and more than 20 are working with OET on post-cruise data & sample analysis.

Data summary for the near-shore sediment characterization task of the Clinch River Environmental Restoration Program

International Nuclear Information System (INIS)

Levine, D.A.; Hargrove, W.W.; Campbell, K.R.; Wood, M.A.; Rash, C.D.

1994-10-01

This report presents the results of the Near-Shore Sediment Characterization Task of the Clinch River Environmental Restoration Program (CR-ERP). The goals of the task were to (1) determine the extent to which near-shore surface sediments are contaminated by releases from the Oak Ridge Reservation (ORR) and (2) provide data for the Watts Bar Reservoir Interagency Permitting Group (WBRIPG) to evaluate the human health risks from exposure to sediments during and following dredging operations. The data collected for this task are also to be used in the Remedial Investigation/Feasibility Study (RLTS) for the CR-ERP operable units (Lower Watts Bar and Clinch River) to characterize the human health risk associated with exposure to near-shore sediments throughout the Watts Bar Reservoir

Off-site source recovery project case study: disposal of high activity cobalt 60 sources at the Nevada test site 2008

International Nuclear Information System (INIS)

Cocina, Frank G.; Stewart, William C.; Wald-Hopkins, Mark; Hageman, John P.

2009-01-01

The Off-Site Source Recovery Project has been operating at Los Alamos National Laboratory since 1998 to address the U.S. Department of Energy responsibility for collection and management of orphaned or disused radioactive sealed sources which may represent a risk to public health and national security if not properly managed.

Materials data base as an interface between fusion reactor designs and materials development

International Nuclear Information System (INIS)

Ishino, S.; Iwata, S.

1983-01-01

The materials data base is an integrated information system of experimental and/or calculated data of materials being compiled to meet the broad needs for materials data by taking advantage of the data base management systems. In this paper the objective of such computerized data base is described from the viewpoint of materials engineers and fusion system designers. Materials data spread themselves widely from the field that relates fundamental understanding of the behaviors of electrons, atoms, vacancies, dislocations and so on to the performance of components, devices, machines and systems. In our approach this information is described as ''relations'' by a set of tables which comprise related variables, for example, a set of values about essential properties for materials selection. This approach based on the relational model enables relational operations, i.e. SELECTION, PROJECTION, JOIN and so on, to select suitable materials, to set trade-off parameters for system designers and to establish design criteria. Stored data comprise (i) fundamental properties for all elements and potential structural materials, (ii) low cycle fatigue, irradiation creep and swelling data for type 316 stainless steels. These data have been selected and evaluated from critical reviews of existing data base of about 2 mega bytes data, some examples of materials selections and extraction of trade-off parameters are shown as a subject of critical issue concerning how to bridge the large gap between materials developments and system designs. (author)

On the shores of Titan's farthest sea a scientific novel

CERN Document Server

Carroll, Michael

2015-01-01

Titan is practically a planet in its own right, with a diameter similar to that of Mercury, methane rainstorms, organic soot and ethane seas. All of the most detailed knowledge on the moon's geology, volcanology, meteorology, marine sciences and chemistry are gathered together here to paint a factually accurate hypothetical future of early human colonization on this strange world. The views from Titan’s Mayda Outpost are spectacular, but all is not well at the moon's remote science base. On the shore of a methane sea beneath glowering skies, atmospherics researcher Abigail Marco finds herself in the middle of murder, piracy and colleagues who seem to be seeing sea monsters and dead people from the past. On the Shores of Titan’s Farthest Sea provides thrills, excitement and mystery – couched in the latest science – on one of the Solar System’s most bizarre worlds, Saturn’s huge moon Titan. "This riveting story, set against a plausibly well integrated interplanetary space, carries us along with its ...

Ultimate loading of wind turbines

DEFF Research Database (Denmark)

Larsen, Gunner Chr.; Ronold, K.; Ejsing Jørgensen, Hans

1999-01-01

An extreme loading study has been conducted comprising a general wind climate analysis as well as a wind turbine reliability study. In the wind climate analysis, the distribution of the (horizontal) turbulence standard deviation, conditioned on the meanwind speed, has been approximated by fitting......, a design turbulence intensity for off-shore application is proposed which, in the IEC code framework, is applicable for extreme as well as for fatigue loaddetermination. In order to establish a rational method to analyse wind turbine components with respect to failure in ultimate loading, and in addition...... a three parameter Weibull distribution to the measured on-shore and off-shore data for wind speed variations. Specific recommendations on off-shore design turbulence intensities are lacking in the presentIEC-code. Based on the present analysis of the off-shore wind climate on two shallow water sites...

New England Wind Energy Education Project (NEWEEP)

Energy Technology Data Exchange (ETDEWEB)

Grace, Robert C.; Craddock, Kathryn A.; von Allmen, Daniel R.

2012-04-25

Project objective is to develop and disseminate accurate, objective information on critical wind energy issues impacting market acceptance of hundreds of land-based projects and vast off-shore wind developments proposed in the 6-state New England region, thereby accelerating the pace of wind installation from today's 140 MW towards the region's 20% by 2030 goals of 12,500 MW. Methodology: This objective will be accomplished by accumulating, developing, assembling timely, accurate, objective and detailed information representing the 'state of the knowledge' on critical wind energy issues impacting market acceptance, and widely disseminating such information. The target audience includes state agencies and local governments; utilities and grid operators; wind developers; agricultural and environmental groups and other NGOs; research organizations; host communities and the general public, particularly those in communities with planned or operating wind projects. Information will be disseminated through: (a) a series of topic-specific web conference briefings; (b) a one-day NEWEEP conference, back-to-back with a Utility Wind Interest Group one-day regional conference organized for this project; (c) posting briefing and conference materials on the New England Wind Forum (NEWF) web site and featuring the content on NEWF electronic newsletters distributed to an opt-in list of currently over 5000 individuals; (d) through interaction with and participation in Wind Powering America (WPA) state Wind Working Group meetings and WPA's annual All-States Summit, and (e) through the networks of project collaborators. Sustainable Energy Advantage, LLC (lead) and the National Renewable Energy Laboratory will staff the project, directed by an independent Steering Committee composed of a collaborative regional and national network of organizations. Major Participants - the Steering Committee: In addition to the applicants, the initial collaborators committing

Systematic Analysis of Rocky Shore Morphology along 700km of Coastline Using LiDAR-derived DEMs

Science.gov (United States)

Matsumoto, H.; Dickson, M. E.; Masselink, G.

2016-12-01

Rock shore platforms occur along much of the world's coast and have a long history of study; however, uncertainty remains concerning the relative importance of various formative controls in different settings (e.g. wave erosion, weathering, tidal range, rock resistance, inheritance). Ambiguity is often attributed to intrinsic natural variability and the lack of preserved evidence on eroding rocky shores, but it could also be argued that previous studies are limited in scale, focusing on a small number of local sites, which restricts the potential for insights from broad, regional analyses. Here we describe a method, using LiDAR-derived digital elevation models (DEMs), for analysing shore platform morphology over an unprecedentedly wide area in which there are large variations in environmental conditions. The new method semi-automatically extracts shore platform profiles and systematically conducts morphometric analysis. We apply the method to 700 km of coast in the SW UK that is exposed to (i) highly energetic swell waves to local wind waves, (ii) macro to mega tidal ranges, and (iii) highly resistant igneous rocks to moderately hard sedimentary rocks. Computer programs are developed to estimate mean sea level, mean spring tidal range, wave height, and rock strength along the coastline. Filtering routines automatically select and remove profiles that are unsuitable for analysis. The large data-set of remaining profiles supports broad and systematic investigation of possible controls on platform morphology. Results, as expected, show wide scatter, because many formative controls are in play, but several trends exist that are generally consistent with relationships that have been inferred from local site studies. This paper will describe correlation analysis on platform morphology in relation to environmental conditions and also present a multi-variable empirical model derived from multi linear regression analysis. Interesting matches exist between platform gradients

Coast Guard: Progress Being Made on Deepwater Project, but Risks Remain

National Research Council Canada - National Science Library

2001-01-01

The Coast Guard is in the final stages of planning the largest procurement project in its history the modernization and/or replacement of over 90 cutters and 200 aircraft used for missions beyond 50 miles from shore...

Structure of macroalgal communities on tropical rocky shores inside and outside a marine protected area.

Science.gov (United States)

Portugal, Adriana Brizon; Carvalho, Fabrício Lopes; Soares, Marcelo de Oliveira; Horta, Paulo Antunes; de Castro Nunes, José Marcos

2017-09-01

The structure of marine macroalgal communities and morpho-functional groups were investigated in a poorly characterized region on the Tropical Southwestern Atlantic coast, Brazil. The survey was conducted at six rocky shores located on the mainland and on coastal islands distributed inside a marine protected area (MPA) and outside the MPA (near a densely populated area). We hypothesized that tropical rocky shores inside the MPA and islands have higher species richness, diversity, and evenness of marine macroalgae. Results confirmed that species richness, diversity and evenness were significantly higher inside the MPA than in rocky shores outside the MPA. Only species richness was higher on islands than on the mainland. The results suggest that human impacts could lead to a competitive advantage and dominance in the articulated calcareous morphotype, resulting in community differences and lower benthic biodiversity in tropical ecosystems near urbanized sites. Copyright © 2017 Elsevier Ltd. All rights reserved.

Littoral Encounters : The Shore as Cultural Interface in King Horn

NARCIS (Netherlands)

Sobecki, Sebastian

2006-01-01

1. III * Later Medieval: Excluding Chaucer -- Brown et al., 10.1093 ... ... between the Saracens and the londisse men allied to the protagonist (' Littoral Encounters: the Shore as Cultural Interface in King Horn', Al-Mas a ... www.ywes.oxfordjournals.org/cgi/content/full/man0092 2.Murray, Alan V.

Reseeding of mussels on denuded rocky shores: preliminary studies ...

African Journals Online (AJOL)

A method is developed to establish clumps of mussels Perna perna in denuded areas on high-energy rocky shores on the south-east coast of South Africa. A total of 20 small (20–30 mm total length) mussels is placed under a 30 cm half-section of perforated PVC drainage pipe bolted to the rock surface. The pipe is left in ...

The Effect of Heat Treatment on the Pull-off Strength of Optionally Varnished Surfaces of Five Wood Materials

Directory of Open Access Journals (Sweden)

Musa Atar

2015-09-01

Full Text Available This study investigated the effects of heat treatment, following optional treatment with synthetic, water-based, and alkyd varnishes, on the pull-off strength of wooden materials sampled from oriental beech (Fagus orientalis L., oak (Quercus petraea Liebl., black poplar (Populus nigra L., pine (Pinus sylvestris L., and fir (Abies bornmulleriana M.. The test samples were subjected to heat treatment at temperatures of 165 °C and 175 °C for periods of 2 and 4 h with a total of 4 variations. With respect to the wood type, the samples of beech wood yielded the highest results for pull-off strength, while fir wood yielded the lowest. With respect to the varnish types, the highest pull-off strength was found in the samples of synthetic varnished beech (5,452 with a 37.2% improvement at 175 °C heat treatment for 4 h, while the lowest results were obtained in the samples of fir (0.991 with a 48.5% decrease at 175 °C heat treatment for 4 h. In conclusion, heat treatment significantly decreased the pull-off strength of the woods.

An analysis of the recreational shore fishery in the Goukamma ...

African Journals Online (AJOL)

Ten years (1993–2002) of shore fishing catch and effort data collected during routine patrols in the Goukamma Marine Protected Area in theWestern Cape Province were analysed. Of a total of 35 species recorded, the most common were backtail, Diplodus sargus capensis (39%), and galjoen, Dichistius capensis (25%).

Closing the Gap--Information Systems Curriculum and Changing Global Market

Science.gov (United States)

Henson, Kerry; Kamal, Mustafa

2010-01-01

The power of outsourcing basic computing technology such as computer programming, database design, customer service operations and system development, to mention a few have changed the conditions of employment in IT. Many of the projects that went off-shore did not perform well due to failure to consider important factors in business dimensions.

Development and Testing of Embedded Gridding Within the Regional Ocean Modeling System: Interaction Between Near-Shore Off-Shore Currents and Material Properties

National Research Council Canada - National Science Library

McWilliams, James

2003-01-01

...) continuing the development of the Regional Ocean Modeling System (ROMS) with respect to its hydrodynamic algorithms, physical transport parameterizations, and range of biogeochemical processes; (2...

The development of thematic materials using project based learning for elementary school

Science.gov (United States)

Yuliana, M.; Wiryawan, S. A.; Riyadi

2018-05-01

Teaching materials is one of the important factors in supporting on learning process. This paper discussed about developing thematic materials using project based learning. Thematic materials are designed to make students to be active, creative, cooperative, easy in thinking to solve the problem. The purpose of the research was to develop thematic material using project based learning which used valid variables. The method of research which used in this research was four stages of research and development proposed by Thiagarajan consisting of 4 stages, namely: (1) definition stage, (2) design stage, (3) development stage, and (4) stage of dissemination. The first stage was research and information collection, it was in form of need analysis with questionnaire, observation, interview, and document analysis. Design stage was based on the competencies and indicator. The third was development stage, this stage was used to product validation from expert. The validity of research development involved media validator, material validator, and linguistic validator. The result from the validation of thematic material by expert showed that the overall result had a very good rating which ranged from 1 to 5 likert scale, media validation showed a mean score 4,83, the material validation showed mean score 4,68, and the mean of linguistic validation was e 4,74. It showed that the thematic material using project based learning was valid and feasible to be implemented in the context thematic learning.

Between tide and wave marks: a unifying model of physical zonation on littoral shores

Directory of Open Access Journals (Sweden)

Christopher E. Bird

2013-09-01

Full Text Available The effects of tides on littoral marine habitats are so ubiquitous that shorelines are commonly described as ‘intertidal’, whereas waves are considered a secondary factor that simply modifies the intertidal habitat. However mean significant wave height exceeds tidal range at many locations worldwide. Here we construct a simple sinusoidal model of coastal water level based on both tidal range and wave height. From the patterns of emergence and submergence predicted by the model, we derive four vertical shoreline benchmarks which bracket up to three novel, spatially distinct, and physically defined zones. The (1 emergent tidal zone is characterized by tidally driven emergence in air; the (2 wave zone is characterized by constant (not periodic wave wash; and the (3 submergent tidal zone is characterized by tidally driven submergence. The decoupling of tidally driven emergence and submergence made possible by wave action is a critical prediction of the model. On wave-dominated shores (wave height ≫ tidal range, all three zones are predicted to exist separately, but on tide-dominated shores (tidal range ≫ wave height the wave zone is absent and the emergent and submergent tidal zones overlap substantially, forming the traditional “intertidal zone”. We conclude by incorporating time and space in the model to illustrate variability in the physical conditions and zonation on littoral shores. The wave:tide physical zonation model is a unifying framework that can facilitate our understanding of physical conditions on littoral shores whether tropical or temperate, marine or lentic.

Multi-disciplinary investigation into the role of regional event beds in near-shore landslides

Science.gov (United States)

Vardy, M. E.; L'Heureux, J.; Vanneste, M. W.; Longva, O.; Forsberg, C. F.; Steiner, A.

2012-12-01

Near-shore landslides in fjords are a widely observed geohazard with a potential for causing damage through tsunami generation and the removal of near-shore infrastructure. Often these events cross the border between terrestrial and submarine landslides, involving the failure of material on the shoreline and foreshore slope. Here we focus on a multi-disciplinary investigation of the 1996 landslide near Finneidfjord, Norway. This event back-stepped 100-150 m inland, removing a 250 m long section of the main north-south highway and several houses, at a cost of four human lives. Acquisition of an extensive and multidisciplinary data set, including high-resolution swath bathymetry, 2D/3D seismic data, multiple short (up to 6 m) and two long (12 m and 14 m, respectively) sediment cores and in situ Free-Fall Piezocone Penetrometer (FF-CPTU) profiles complemented with geotechnical laboratory data, has provided a detailed analysis of both the landslide morphology and stratigraphic controls. Correlating the geophysical (include remote physical properties inverted from seismic reflection profiles), geological and geotechnical data identifies the landslide glide plane as a thin (< 0.5 m), laminated, clay-rich bed with high pore water content (45 - 65 %) and low shear strength (4 - 8 kPa), deposited as a result of terrestrial quick-clay landslides in the hinterland. The relative weakness of the layer is thought to be a result of both the rapid deposition and excess pore pressure caused by artesian groundwater flow. Together, these act as preconditioning factors for failure, controlling the failure depth and probability if not the exact timing of the event.

NCAP projection displays: key issues for commercialization

Science.gov (United States)

Tomita, Akira; Jones, Philip J.

1992-06-01

Recently there has been much interest in a new polymer nematic dispersion technology, often called as NCAP, PDLC, PNLC, LCPC, etc., since projection displays using this technology have been shown to produce much brighter display images than projectors using conventional twisted nematic (TN) lightvalves. For commercializing projection displays based on this polymer nematic dispersion technology, the new materials must not only meet various electro- optic requirements, e.g., operational voltage, `off-state'' scattering angle, voltage holding ratio and hysteresis, but must also be stable over the lifetime of the product. This paper reports recent progress in the development of NCAP based projection displays and discusses some of the key commercialization issues.

FUNCTIONAL MODEL OF THE MATERIAL RESOURCES MANAGEMENT FOR PROJECTS OF THE CREATION OF NEW TECHNIQUES

Directory of Open Access Journals (Sweden)

S. Yu. Danshyna

2016-01-01

Full Text Available The article is devoted to problem of material management arising in the implementation of projects for the development and creation (modernization of the new techniques. The uniqueness of the projects, their limit on the cost and time does not allow the use of traditional approaches to resource management. Such projects are often implemented in the development of companies; where it is not possible to abandon the traditional operating methods of management. The aim of the article is a formalization of the process of material management of projects, a description of its information flows for integrate into the project management practices and for improve the efficiency of material management. For the systematization of information arising from the material resources management, invited the set-theoretic representation of the management process. According with the requirements of project management standards were described the sets and defined rules of their transformation. Specification of the set-theoretic representation helped to establish the area and limits of the modelling process. Further decomposition process became the basis of the functional model, constructed in accordance with the methodology IDEF 0. A graphical representation of the model allows you to visualize the process at different levels of detail. For specification of issues related to the organization and promotion of material flow, were developed functional models of sub-processes and were described the identified data-flows. For the harmonization of process and project approaches formulated conditions for evaluating the efficiency of material management. The developed models can be the basis for designing the structure of companies, for regulation of their project activities, as well as for establishing an information system of management resources of projects.

Tritium activity concentration along the Western shore of the Black Sea

International Nuclear Information System (INIS)

Carmen Varlam; Faurescu, I.; Irina Vagner; Denisa Faurescu; Patrascu, V.; Margineanu, R.M.; Duliu, O.G.

2013-01-01

The Black Sea tritium level was investigated in 33 places southward the Danube Delta covering about 360 km of the Black Sea Western Shore. Both surface (10 cm depth) and bottom (up to 20 m depth) water samples were collected. In the close vicinity of Danube Delta, the tritium activity concentration in the surface water was around 28 TU, which is almost the same as that of the Danube River waters, but it decreased to about 5 TU in the bottom water. This discrepancy slowly diminished wherein at about 120 km southward, the tritium content in both surface and bottom water reached almost the same constant value of 6.5 ± 2.3 TU. This value, about two and a half times smaller than that reported 17 years ago, remained almost unchanged for the last 240 km of shore up to the Turkish border. (author)

AFSC/ABL: ShoreZone Ground Stations, web-posted database in ArcGIS

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The web-posted Alaska Shore Station Database is a compilation of hundreds of intertidal sites that were visited and evaluated throughout the coastal waters of...

Construction projects using alternative materials: a framework to assess their sustainability.

OpenAIRE

Fevre-Gautier , Anne-Lise; Beylot , Antoine; Vaxelaire , Stéphane; Michel , Pascale; Brullot , Sabrina; Lannou , Grégory; Stoos , Marion

2012-01-01

The increasing use of alternative materials and local solutions for construction projects raises questions about success conditions and criteria for the economic feasibility and global sustainability of such projects. Among others, how can design conditions - especially regarding the decision process - determine their success? We will present the results of a two-years project conducted from February 2010 to March 2012 in collaboration with ADEME (French agency of environment and energy contr...

Using an Undergraduate Materials Research Project to Foster Multidisciplinary Teaming Skills

Science.gov (United States)

Newell, James A.; Cleary, Doug D.

2004-01-01

This paper describes the use of undergraduate materials multidisciplinary research projects as a means of addressing the growing industrial demand for graduates experienced in working in multidisciplinary teams. It includes a detailed description of a project in which a multidisciplinary team of chemical engineering and civil engineering students…

Mapping, Navigation, and Learning for Off-Road Traversal

DEFF Research Database (Denmark)

Konolige, Kurt; Agrawal, Motilal; Blas, Morten Rufus

2009-01-01

The challenge in the DARPA Learning Applied to Ground Robots (LAGR) project is to autonomously navigate a small robot using stereo vision as the main sensor. During this project, we demonstrated a complete autonomous system for off-road navigation in unstructured environments, using stereo vision......, online terrain traversability learning, visual odometry, map registration, planning, and control. At the end of 3 years, the system we developed outperformed all nine other teams in final blind tests over previously unseen terrain.......The challenge in the DARPA Learning Applied to Ground Robots (LAGR) project is to autonomously navigate a small robot using stereo vision as the main sensor. During this project, we demonstrated a complete autonomous system for off-road navigation in unstructured environments, using stereo vision...

Preliminary Observations on the Uptake of Poliovirus by West Coast Shore Crabs

Science.gov (United States)

DiGirolamo, Rudolph; Wiczynski, Leokadia; Daley, Michael; Miranda, Florencio

1972-01-01

West Coast shore crabs (Pachygrapsus sp. and Hemigrapsus sp.), when in seawater contaminated with poliovirus or allowed to feed on virus-contaminated mussels (Mytilus californianus), were found to accumulate high titers of virus. PMID:4333894

Design of an off-axis visual display based on a free-form projection screen to realize stereo vision

Science.gov (United States)

Zhao, Yuanming; Cui, Qingfeng; Piao, Mingxu; Zhao, Lidong

2017-10-01

A free-form projection screen is designed for an off-axis visual display, which shows great potential in applications such as flight training for providing both accommodation and convergence cues for pilots. The method based on point cloud is proposed for the design of the free-form surface, and the design of the point cloud is controlled by a program written in the macro-language. In the visual display based on the free-form projection screen, when the error of the screen along Z-axis is 1 mm, the error of visual distance at each filed is less than 1%. And the resolution of the design for full field is better than 1‧, which meet the requirement of resolution for human eyes.

Nuclear spin off

International Nuclear Information System (INIS)

1984-01-01

The focus for nuclear energy research in the UK has been mainly the generation of electricity. However, nuclear technology is also applied in many areas other than energy production. Nuclear Spin Off shows how technology has been transferred to industry, agriculture, medicine and other areas, creating considerable material benefit. Nuclear research has produced revolutionary new materials and measuring and detection techniques. This film shows a wide range of uses. (author)

Nuclear spin-off

International Nuclear Information System (INIS)

1981-11-01

This booklet gives examples of 'nuclear spin off', from research programmes carried out for the UKAEA, under the following headings; non destructive testing; tribology; environmental protection; flow measurement; material sciences; mechanical engineering; marine services; biochemical technology; electronic instrumentation. (U.K.)

City of Austin: Green habitat learning project. A green builder model home project

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

The purpose of the Year 14 UCETF project was to design and construct a residential structure that could serve as a demonstration facility, training site, and testing and monitoring laboratory for issues related to the implementation of sustainable building practices and materials. The Model Home Project builds on the previous and existing efforts, partially funded by the UCETF, of the City of Austin Green Builder Program to incorporate sustainable building practices into mainstream building activities. The Green Builder Program uses the term {open_quotes}green{close_quotes} as a synonym for sustainability. In the research and analysis that was completed for our earlier reports in Years 12 and 13, we characterized specific elements that we associate with sustainability and, thus, green building. In general, we refer to a modified life cycle assessment to ascertain if {open_quotes}green{close_quotes} building options reflect similar positive cyclical patterns found in nature (i.e. recyclability, recycled content, renewable resources, etc.). We additionally consider economic, human health and synergistic ecological impacts associated with our building choices and characterize the best choices as {open_quotes}green.{close_quotes} Our ultimate goal is to identify and use those {open_quotes}green{close_quotes} materials and processes that provide well for us now and do not compromise similar benefits for future generations. The original partnership developed for this project shifted during the year from a project stressing advanced (many prototypical) {open_quotes}green{close_quotes} building materials and techniques in a research and demonstration context, to off-the-shelf but underutilized {open_quotes}green{close_quotes} materials in the practical social context of using {open_quotes}green{close_quotes} technologies for low income housing. That project, discussed in this report, is called the Green Habitat Learning Project.

Evaluation of the Benefits Attributable to Automotive Lighweight Materials Program Research and Development Projects

Energy Technology Data Exchange (ETDEWEB)

Das, S.

2002-01-11

The purpose of this project is to identify and test methods appropriate for estimating the benefits attributable to research and development (R and D) projects funded by the Automotive Lightweight Materials (ALM) Program of the Office of Advanced Automotive Technologies (OAAT) of the U.S. Department of Energy (DOE). The program focuses on the development and validation of advanced lightweight materials technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. The work supports the goals of the Partnership for a New Generation of Vehicles (PNGV). Up to thirty percent of the improvement required to meet the PNGV goal of tripling vehicle fuel economy and much of its cost, safety, and recyclability goal depend on the lightweight materials. Funded projects range from basic materials science research to applied research in production environments. Collaborators on these projects include national laboratories, universities, and private sector firms, such as leading automobile manufacturers and their suppliers.

THE USE OF GENERATING SETS WITH lNG GAS ENGINES IN “SHORE TO SHIP” SYSTEMS

Directory of Open Access Journals (Sweden)

Dariusz TARNAPOWICZ

2016-07-01

Full Text Available The main sources of air pollution in ports are ships, on which electrical energy is produced in the autonomous gener-ating sets Diesel-Generator. The most effective way to reduce harmful exhaust emissions from ships is to exclude marine generating sets and provide the shore-side electricity in “Shore to Ship” system. The main problem in the implementa-tion of power supply for ships from land is connected with matching parameters of voltage in onshore network with marine network. Currently, the recommended solution is to supply ships from the onshore electricity network with the use of power electronic converters. This article presents an analysis of the „Shore to Ship” system with the use of gener-ating sets with LNG gas engines. It shows topologies with LNG – Generator sets, environmental benefits of such a solu-tion, advantages and disadvantages.

Gender Stereotyping and the Jersey Shore: A Content Analysis

OpenAIRE

Jacqueline S. Anderson; Sharmila Pixy Ferris

2016-01-01

Reality television is a highly popular genre, with a growing body of scholarly research. Unlike scripted programming, which offers fictional storylines, reality television relies heavily on cast member’s reactions to carefully crafted situations. This study examined the relationship between reality television and gender role stereotyping in a seminal reality television show, MTV’s Jersey Shore. Content analysis was used to conduct an in-depth examination of the first season of ...

The Feed Materials Program of the Manhattan Project: A Foundational Component of the Nuclear Weapons Complex

Science.gov (United States)

Reed, B. Cameron

2014-12-01

The feed materials program of the Manhattan Project was responsible for procuring uranium-bearing ores and materials and processing them into forms suitable for use as source materials for the Project's uranium-enrichment factories and plutonium-producing reactors. This aspect of the Manhattan Project has tended to be overlooked in comparison with the Project's more dramatic accomplishments, but was absolutely vital to the success of those endeavors: without appropriate raw materials and the means to process them, nuclear weapons and much of the subsequent cold war would never have come to pass. Drawing from information available in Manhattan Engineer District Documents, this paper examines the sources and processing of uranium-bearing materials used in making the first nuclear weapons and how the feed materials program became a central foundational component of the postwar nuclear weapons complex.

Distribution of elements along the shore of the Kayrakum water reservoir

International Nuclear Information System (INIS)

Djuraev, A.A.; Abdushukurov, D.A.; Passell, H.

2012-01-01

Soil and sediment samples, selected along the shore of the Kayrakum water reservoir in the Syrdarya River system, have been analyzed using X-Ray Fluorescence. The results obtained show spatial variations in the concentrations of both selected major rock-forming elements as well as of trace elements.

A post-contract project analysis of material waste and cost overrun ...

African Journals Online (AJOL)

Material waste and cost overrun have been identified as common problems in the construction industry. These problems occur at both pre- and post-contract stages of a construction project. As a result of a dearth of empirical research and low level of awareness, the majority of managers of construction projects in Nigeria ...

Intertidal ecology of the sea shore near Tarapur Atomic Power Station

International Nuclear Information System (INIS)

Balani, M.C.

1975-01-01

Surveys were carried out between March 1969 and August 1970 to study the fauna and flora in the littoral zone of the sea shore near the Tarapur Atomic Power Station. The beach adjacent to the Station is rocky with a number of tidal pools inhabited by a variety of organisms whereas the beach to the south is mostly sandy and barren except for a small rocky stretch. The tidal range is 6 m and over a mile of beach is exposed during low tide. The near shore currents are very strong and have a clear northsouth oscillation with the changing tides. Less Atherina sp. fry were available near the Power Station in March 1970 than during the previous year. Possible reasons for these differences are discussed, including the effect of heated discharges on biota. The need is also emphasized to monitor the biota (Plankton, Nekton and Benthos) systematically for content of fission products released by the Power Station. (auth.)

Effects of human trampling on a rocky shore fauna on the Sao Paulo coast, southeastern Brazil.

Science.gov (United States)

Ferreira, M N; Rosso, S

2009-11-01

Increased tourist activity in coastal regions demands management strategies to reduce impacts on rocky shores. The highly populated coastal areas in southeastern Brazil are an example of degradation caused by development of industry and tourism. Among different shore impacts, trampling has been intensively studied, and may represent a significant source of stress for intertidal fauna. A randomised blocks design was applied to experimentally study the effects of two different trampling intensities on richness, diversity, density and biomass of the rocky shore fauna of Obuseiro beach, Guarujá, southeastern Brazil. Blocks were distributed in two portions of the intertidal zone, dominated respectively by Chthamalus bisinuatus (Cirripedia) and Isognomon bicolor (Bivalvia). Blocks were trampled over three months, simulating the vacation period in Brazil and were monitored for the following nine months. Results indicate that Chthamalus bisinuatus is vulnerable to trampling impacts. Richness, diversity and turn-over index tended to be higher in trampled plots four months after trampling ceased. In general, results agree with previous trampling studies, suggesting that even low intensities of trampling may cause some impact on intertidal communities. Management strategies should include isolation of sensitive areas, construction of boardwalks, visitor education and monitoring programmes. In Brazil, additional data obtained from experimental studies are necessary in order to achieve a better understanding of trampling impacts on rocky shore communities.

Locomotion of Stramonita haemastoma (Linnaeus (Gastropoda, Muricidae on a mixed shore of rocks and sand

Directory of Open Access Journals (Sweden)

Marcos G. Papp

2001-03-01

Full Text Available Mixed shores of rocks and sand are appropriate systems for the study of limitations that the isolation of rocks may impose for gastropods that typically inhabit rocky shores. We marked 52 Stramonita haemastoma (Linnaeus, 1767 snails on a mixed shore and found that 34 of them moved between rocks one to four times during 15 surveys in a period of 72 days. In the experiments, the snails moved on rock by continuous, direct, ditaxic, alternate undulations of the foot sole but on submerged sand they used slower arrhythmic discontinuous contractions of the foot sole. They switched between modes of locomotion in response to the type and topography of the substrate and possibly to water dynamics. In nature, snails moved between rocks forming aggregations where they oviposited. This may have masked other causes of movement, such as availability of prey. Most snails burrowed into the sand when the rocks became exposed during low tides. Further experiments are needed to explicitly address the possible causes of movements among rocks and burial.

Material decomposition in an arbitrary number of dimensions using noise compensating projection

Science.gov (United States)

O'Donnell, Thomas; Halaweish, Ahmed; Cormode, David; Cheheltani, Rabee; Fayad, Zahi A.; Mani, Venkatesh

2017-03-01

Purpose: Multi-energy CT (e.g., dual energy or photon counting) facilitates the identification of certain compounds via data decomposition. However, the standard approach to decomposition (i.e., solving a system of linear equations) fails if - due to noise - a pixel's vector of HU values falls outside the boundary of values describing possible pure or mixed basis materials. Typically, this is addressed by either throwing away those pixels or projecting them onto the closest point on this boundary. However, when acquiring four (or more) energy volumes, the space bounded by three (or more) materials that may be found in the human body (either naturally or through injection) can be quite small. Noise may significantly limit the number of those pixels to be included within. Therefore, projection onto the boundary becomes an important option. But, projection in higher than 3 dimensional space is not possible with standard vector algebra: the cross-product is not defined. Methods: We describe a technique which employs Clifford Algebra to perform projection in an arbitrary number of dimensions. Clifford Algebra describes a manipulation of vectors that incorporates the concepts of addition, subtraction, multiplication, and division. Thereby, vectors may be operated on like scalars forming a true algebra. Results: We tested our approach on a phantom containing inserts of calcium, gadolinium, iodine, gold nanoparticles and mixtures of pairs thereof. Images were acquired on a prototype photon counting CT scanner under a range of threshold combinations. Comparison of the accuracy of different threshold combinations versus ground truth are presented. Conclusions: Material decomposition is possible with three or more materials and four or more energy thresholds using Clifford Algebra projection to mitigate noise.

Aspect of the 2011 off the Pacific coast Tohoku Earthquake, Japan

International Nuclear Information System (INIS)

Kato, Aitaro

2012-01-01

The 2011 off the Pacific coast of Tohoku Earthquake (Tohoku-Oki), Japan, was the first magnitude (M) 9 subduction megathrust event to be recorded by a dense network of seismic, geodetic, and tsunami observations. I here review the Tohoku-Oki earthquake in terms of, 1) asperity model, 2) earthquake source observations, 3) precedent processes, 4) postseismic slip (afetrslip). Based on finite source models of the Tohoku-Oki mainshock, the coseismic fault slip exceeded 30 m at shallow part of the subduction zone off-shore of Miyagi. The rupture reached the trench axis, producing a large uplift therein, which was likely an important factor generating devastating tsunami waves. The mainshock was preceded by slow-slip transients propagating toward the initial rupture point, which may have caused substantial stress loading, prompting the unstable dynamic rupture of the mainshock. Furthermore, a sequence of M 7-class interplate earthquakes and subsequent large afterslip events, those occurred before the mainshock rupture, might be interpreted as preparation stage of the earthquake generation. Most of slip released by the postseismic deformation following the Tohoku-Oki mainshock is located in the region peripheral to the large coseismic slip area. (author)

Benthic life on the tropical sandy shore: Miramar beach a case study

Digital Repository Service at National Institute of Oceanography (India)

Ingole, B.S.

of shore-dwelling bivalve molluscs. The foot of intertidal and subtidal clams such as Mactra violacea and Meretrix spp. is relatively large and powerful. It can pull the shell below the sand surface very quickly symbolising the burrowing life style. Other...

Correlation between some technological parameters and properties of composite material based on recycled tires and polymer binder

Science.gov (United States)

Plesuma, Renate; Malers, Laimonis

2015-04-01

The present article is dedicated to the determination of a possible connection between the composition, specific properties of the composite material and molding pressure as an important technological parameter. Apparent density, Shore C hardness, compressive modulus of elasticity and compressive stress at 10% deformation was determined for composite material samples. Definite formation conditions - varying molding pressure conditions at ambient temperature and corresponding relative air humiditywere realized. The results obtained showed a significant effect of molding pressure on the apparent density, mechanical properties of composite material as well as on the compressive stress change at a cyclic mode of loading. Some general regularities were determined - mechanical properties of the composite material, as well as values of Shore C hardness increases with an increase of molding pressure.

IAEA TC Project 'Strengthening safety and reliability of fuel and materials in nuclear power plants'

International Nuclear Information System (INIS)

Makihara, Y.

2008-01-01

The Regional TC Project in Europe RER9076 'Strengthening Safety and Reliability of Fuel and Materials in Nuclear Power Plants' was launched in 2003 as a four-year project and was subsequently extended in 2006 to run through 2008. The purpose of the Project is to support the Central and Eastern European countries with the necessary tools to fulfill their own fuel and material licensing needs. The main objective will be to provide quality data on fuel and materials irradiated in power reactors and in dedicated experiments carried out in material test reactors (MTRs). Within the framework of the Project, ten tasks were implemented. These included experiments performed at the test facilities in the region, training courses and workshops related to fuel safety. While several tasks are expected to be completed by the end of RER9076, some remain. It would be desirable to initiate a new RER Project from the next TC cycle (2009-2011) in order to take over RER9076 and to implement new tasks required for enhancing fuel safety in the region. (author)

Standardizing the performance evaluation of short-term wind prediction models

DEFF Research Database (Denmark)

Madsen, Henrik; Pinson, Pierre; Kariniotakis, G.

2005-01-01

Short-term wind power prediction is a primary requirement for efficient large-scale integration of wind generation in power systems and electricity markets. The choice of an appropriate prediction model among the numerous available models is not trivial, and has to be based on an objective...... evaluation of model performance. This paper proposes a standardized protocol for the evaluation of short-term wind-poser preciction systems. A number of reference prediction models are also described, and their use for performance comparison is analysed. The use of the protocol is demonstrated using results...... from both on-shore and off-shore wind forms. The work was developed in the frame of the Anemos project (EU R&D project) where the protocol has been used to evaluate more than 10 prediction systems....

Systematic analysis of rocky shore platform morphology at large spatial scale using LiDAR-derived digital elevation models

Science.gov (United States)

Matsumoto, Hironori; Dickson, Mark E.; Masselink, Gerd

2017-06-01

Much of the existing research on rocky shore platforms describes results from carefully selected field sites, or comparisons between a relatively small number of selected sites. Here we describe a method to systematically analyse rocky shore morphology over a large area using LiDAR-derived digital elevation models. The method was applied to 700 km of coastline in southwest England; a region where there is considerable variation in wave climate and lithological settings, and a large alongshore variation in tidal range. Across-shore profiles were automatically extracted at 50 m intervals around the coast where information was available from the Coastal Channel Observatory coastal classification. Routines were developed to automatically remove non-platform profiles. The remaining 612 shore platform profiles were then subject to automated morphometric analyses, and correlation analysis in respect to three possible environmental controls: wave height, mean spring tidal range and rock strength. As expected, considerable scatter exists in the correlation analysis because only very coarse estimates of rock strength and wave height were applied, whereas variability in factors such as these can locally be the most important control on shoreline morphology. In view of this, it is somewhat surprising that overall consistency was found between previous published findings and the results from the systematic, automated analysis of LiDAR data: platform gradient increases as rock strength and tidal range increase, but decreases as wave height increases; platform width increases as wave height and tidal range increase, but decreases as rock strength increases. Previous studies have predicted shore platform gradient using tidal range alone. A multi-regression analysis of LiDAR data confirms that tidal range is the strongest predictor, but a new multi-factor empirical model considering tidal range, wave height, and rock strength yields better predictions of shore platform gradient

The Role of Infragravity Waves in Near-Bed Cross-Shore Sediment Flux in the Breaker Zone

Directory of Open Access Journals (Sweden)

Samantha Kularatne

2014-08-01

Full Text Available Results from a series of field experiments, conducted to investigate the influence of infragravity waves (from wave groups, ripple type and location relative to the breaker line on cross-shore suspended sediment flux close to the sea bed in nearshore environments, are presented. The field data were collected from Cable Beach (Broome and Mullaloo Beach in Western Australia and Chilaw in Sri Lanka. These beaches experience different incident wave, tidal and morphological conditions, with Cable Beach having a 10-m spring tidal range, whilst the other two beaches have tidal ranges <1.0 m. Measurements included simultaneous records of surface elevation, two-dimensional horizontal current velocities and suspended sediment concentrations, together with half-hourly observations of the seabed topography. Although most of the data sets were obtained just outside of the surf zone, a few results from inside of the surf zone were also included. A significant correlation between wave groups and suspended sediment concentration was found at all of the measurement sites, either with or without bed ripples. The direction and magnitude of cross-shore suspended sediment flux varied with location with respect to the breaker line; however, other parameters, such as bed ripples and velocity skewness, could have influenced this result. In Broome, where the measurement location with respect to the breaker line varied with the tidal cycle, the cross-shore sediment flux due to swell waves was shoreward inside and just outside of the surf zone and seaward farther offshore of the breaker line. Further, sediment flux due to swell waves was onshore when the seabed was flat and offshore over post-vortex ripples. Sediment flux due to swell waves was onshore when the normalised velocity skewness towards the shore was high (positive; the flux was offshore when the skewness was lower, but positive, suggesting the influence of other parameters, such as ripples and grain size. The

Mixing during draw-off in small SDHW systems

DEFF Research Database (Denmark)

Andersen, Elsa; Furbo, Simon

1998-01-01

The aim of the project is to determine a maximum acceptable mixing rate during hot water tappings, so called draw-offs. Based on a pervious proposal for a maximum acceptable decrease of thermal performance due to mixing during draw-off, investigations are carried out in order to determine the mix...

Attitudes towards wind power development in Denmark

DEFF Research Database (Denmark)

Ladenburg, Jacob

The present paper analyses the attitudes towards existing and future land-based turbines and off-shore wind farms. The analysis is carried out using a probit model to elicit systematic characteristics determining the attitude of the population. The analyses show that off-shore development...... is preferred to land based development, which indicates that the wind power development should be taken off-shore. But, the results also point out that the land-based opportunities for wind power development are not exhausted. On a more detailed level, the results denote that the attitude towards both land...... based and off-shore wind power vary with age of the respondents and experience with wind turbines. Younger respondents are more positive towards wind power than older respondents, pointing towards an increase in acceptance in the future. The attitude was also found to covariate negatively...

Microcomputers take over in off-shore process

Energy Technology Data Exchange (ETDEWEB)

Claricoates, J

1978-10-01

The special capabilities and adaptability of microcomputers are typically demonstrated by the use of them on Mobil Exploration, Norway, Inc.'s Statfjord A Condeep platform. One of the unique features of offshore oil production is that so many different operations are conducted in a very confined space. On Statfjord A drilling, production, storage of crude oil, gas compression for sale or reinjection, custody transfer, generation and distribution of a significant amount of electric power, a hotel facility, and flight operations, all have to be accommodated and controlled. Superimposed on these are comprehensive fire detection and shutdown systems. In such a highly complex, densely packed, and highly interactive environment, a supervisory control and data acquisition system (SCADA) by providing coordinated and easily read displays, better records for alarm analysis, and possibly suggesting corrective action when a fault does occur, is an essential aid to an operator, whose decisions must always by correct.

Submarine canyons off Madras Coast

Digital Repository Service at National Institute of Oceanography (India)

Setty, M.G.A.P.

Submarine canyons off the coast of Madras, Tamil Nadu, India were studied during cruise of @iINS Kistna@@ as part of the IIOE programme They consist of hill-like projections and V-shaped valleys Their other features are also reported...

Distribution of macroinvertebrates on intertidal rocky shores in Gorgona Island, Colombia (Tropical Eastern Pacific

Directory of Open Access Journals (Sweden)

Edgardo Londoño-Cruz

2014-02-01

Full Text Available Organisms found on rocky shores must endure harsh environmental conditions during tidal changes but scientific studies on tropical rocky shores are scarce, particularly in Colombian shores. Here we describe the spatial distribution of macroinvertebrates associated to the intertidal rocky ecosystems of Gorgona Island, Colombia (Tropical Eastern Pacific. Sampling was carried out in four localities around the Island: La Ventana and La Camaronera (sampled during October 2010 and La Mancora and El Muelle (sampled during March 2011. Two methodologies were used: rapid ecological assessments for qualitative data and quadrats for quantitative data. The richness, abundance, diversity (Shannon-Wiener H’, and evenness (Pielou J’ of macroinvertebrates were determined for and compared between, using one way ANOVA, each locality and the three intertidal zones of La Ventana (see methods. One hundred twenty-one species of macroinvertebrates were found during the sampling period. In all localities, Mollusca was the richest and most abundant taxon (46% of the species and 59% of the individuals, followed by Crustacea (32% of the species and 33% of the individuals. The other groups accounted for the remaining 22% of the richness and 8% of the abundance. Several studies have demonstrated that mollusks and crustaceans are the richest and most abundant taxa in marine benthic communities. Most of the abundant species found were herbivores. The species composition varied among zones. The results of dominant species for each zone are consistent with the ones observed in other tropical rocky intertidal shores. All response variables showed a decreasing pattern from the low to the high intertidal (in La Ventana. Post-hoc results indicated that the high intertidal, the zone with the harshest environmental conditions, had significantly lower values than the other two zones for all response variables. Comparisons between the low intertidal zones of the different localities

Evaluation of trophic state and plankton abundance from the environmental parameters of Visakhapatnam Harbour and near-shore waters, east coast of India

Digital Repository Service at National Institute of Oceanography (India)

Tripathy, S.C.; KusumaKumari, B.A.V.L.; Sarma, V.V.; Murty, T.V.R.

The present work describes the nutrient indices of the Visakhapatnam harbour and near-shore waters. The inner channels of Visakhapatnam harbour are considered to be eutrophic while near-shore waters (coastal and inshore waters) associated...

Materials and Structures Research for Gas Turbine Applications Within the NASA Subsonic Fixed Wing Project

Science.gov (United States)

Hurst, Janet

2011-01-01

A brief overview is presented of the current materials and structures research geared toward propulsion applications for NASA s Subsonic Fixed Wing Project one of four projects within the Fundamental Aeronautics Program of the NASA Aeronautics Research Mission Directorate. The Subsonic Fixed Wing (SFW) Project has selected challenging goals which anticipate an increasing emphasis on aviation s impact upon the global issue of environmental responsibility. These goals are greatly reduced noise, reduced emissions and reduced fuel consumption and address 25 to 30 years of technology development. Successful implementation of these demanding goals will require development of new materials and structural approaches within gas turbine propulsion technology. The Materials and Structures discipline, within the SFW project, comprise cross-cutting technologies ranging from basic investigations to component validation in laboratory environments. Material advances are teamed with innovative designs in a multidisciplinary approach with the resulting technology advances directed to promote the goals of reduced noise and emissions along with improved performance.

Analysis of Construction Material Procurement Retardation on Sepaku-Petung Rigid Pavement Improvement Project in East Kalimantan Province

Directory of Open Access Journals (Sweden)

Rama Nugraha

2017-11-01

Full Text Available his study aims to know the factors influencing the retardation in procurement of construction materials on Sepaku-Petung pavement improvement project in East Kalimantan Province;to know the most dominant factor affecting the retardation in procurement of construction materials on Sepaku-Petung pavement improvement project in East Kalimantan Province; to determine what strategies that minimize the waiting time of materials in the improvement of Sepaku-Petung pavement project in East Kalimantan Province. This study used quantitative research method. The data was collected through interview, questionnaire distribution, and discussion forum. Based on the results of research and data analysis conducted, it can be concluded thatsuppliers, contractors, field conditions, and unpredictable conditionswere affecting the retardation in procurement of materials in the pavement improvement project in East Kalimantan. Field condition was the most dominant factors in the realization of Sepaku-Petung pavement improvement project in East Kalimantan province. Type B (Retarding Admixtures could be added to retard the time-binding of the concrete (setting time, therefore minimizing material procurement waiting time. The contractor should also build his own supplier close to the project site to reduce the distance between the concrete supplier location and the project site.

Whole-community facilitation regulates biodiversity on Patagonian rocky shores.

Directory of Open Access Journals (Sweden)

Brian R Silliman

Full Text Available Understanding the factors that generate and maintain biodiversity is a central goal in ecology. While positive species interactions (i.e., facilitation have historically been underemphasized in ecological research, they are increasingly recognized as playing important roles in the evolution and maintenance of biodiversity. Dominant habitat-forming species (foundation species buffer environmental conditions and can therefore facilitate myriad associated species. Theory predicts that facilitation will be the dominant community-structuring force under harsh environmental conditions, where organisms depend on shelter for survival and predation is diminished. Wind-swept, arid Patagonian rocky shores are one of the most desiccating intertidal rocky shores ever studied, providing an opportunity to test this theory and elucidate the context-dependency of facilitation.Surveys across 2100 km of southern Argentinean coastline and experimental manipulations both supported theoretical predictions, with 43 out of 46 species in the animal assemblage obligated to living within the matrices of mussels for protection from potentially lethal desiccation stress and predators having no detectable impact on diversity.These results provide the first experimental support of long-standing theoretical predictions and reveal that in extreme climates, maintenance of whole-community diversity can be maintained by positive interactions that ameliorate physical stress. These findings have important conservation implications and emphasize that preserving foundation species should be a priority in remediating the biodiversity consequences of global climate change.

Project GRETE: evaluation of non destructive testing techniques for monitoring of material degradation

International Nuclear Information System (INIS)

Coste, J.F.

2001-01-01

The material aging of major critical components of nuclear installations due to in-service conditions may lead to a degradation of their mechanical characteristics. The early detection of material changes and their monitoring using innovative non destructive testing techniques would allow to plan actions in order to prevent the apparition of macroscopic damage (e.g. cracks). One major difficulty in using these particular techniques is to correlate the changes in the measured NDT signals to the microstructural changes in the material due to aging. This problem may be solved through careful microstructural examinations of the material damage. The objective of the project GRETE is to illustrate the potential use of NDT techniques for the monitoring of material degradation through two examples: neutron irradiation of reactor pressure vessel steel and thermal fatigue of piping. The purpose of this paper is to present the project and its programme of work. (author)

Project accent: graphite irradiated creep in a materials test reactor

International Nuclear Information System (INIS)

Brooking, M.

2014-01-01

Atkins manages a pioneering programme of irradiation experiments for EDF Energy. One of these projects is Project ACCENT, designed to obtain evidence of a beneficial physical property of the graphite, which may extend the life of the Advanced Gas-cooled Reactors (AGRs). The project team combines the in-house experience of EDF Energy with two supplier organisations (providing the material test reactors and testing facilities) and supporting consultancies (Atkins and an independent technical expert). This paper describes: - Brief summary of the Project; - Discussion of the challenges faced by the Project; and - Conclusion elaborating on the aims of the Project. These challenging experiments use bespoke technology and both un-irradiated (virgin) and irradiated AGR graphite. The results will help to better understand graphite irradiation-induced creep (or stress modified dimensional change) properties and therefore more accurately determine lifetime and safe operating envelopes of the AGRs. The first round of irradiation has been completed, with a second round about to commence. This is a key step to realising the full lifetime ambition for AGRs, demonstrating the relaxation of stresses within the graphite bricks. (authors)

High-resolution onshore-offshore morpho-bathymetric records of modern chalk and granitic shore platforms in NW France

Science.gov (United States)

Duperret, Anne; Raimbault, Céline; Le Gall, Bernard; Authemayou, Christine; van Vliet-Lanoë, Brigitte; Regard, Vincent; Dromelet, Elsa; Vandycke, Sara

2016-07-01

Modern shore platforms developed on rocky coasts are key areas for understanding coastal erosion processes during the Holocene. This contribution offers a detailed picture of two contrasted shore-platform systems, based on new high-resolution shallow-water bathymetry, further coupled with aerial LiDAR topography. Merged land-sea digital elevation models were achieved on two distinct types of rocky coasts along the eastern English Channel in France (Picardy and Upper-Normandy: PUN) and in a NE Atlantic area (SW Brittany: SWB) in NW France. About the PUN case, submarine steps, identified as paleo-shorelines, parallel the actual coastline. Coastal erosive processes appear to be continuous and regular through time, since mid-Holocene at least. In SWB, there is a discrepancy between contemporary coastline orientation and a continuous step extending from inland to offshore, identified as a paleo-shoreline. This illustrates a polyphased and inherited shore platform edification, mainly controlled by tectonic processes.

Offshore Vendors’ Software Development Team Configurations

DEFF Research Database (Denmark)

Chakraborty, Suranjan; Sarker, Saonee; Rai, Sudhanshu

2012-01-01

This research uses configuration theory and data collected from a major IT vendor organization to examine primary configurations of distributed teams in a global off-shoring context. The study indicates that off-shoring vendor organizations typically deploy three different types of configurations...

Production of NDA Working Reference Materials for the Capability Evaluation Project

International Nuclear Information System (INIS)

Noll, P.D. Jr.; Marshall, R.S.

1998-01-01

The production of Non Destructive Assay (NDA) Working Reference Materials (WRMs) that are traceable to nationally recognized standards was undertaken to support implementation of the Idaho National Engineering and Environmental Laboratory (INEEL) Nondestructive Waste Assay Capability Evaluation Project (CEP). The WRMs produced for the CEP project consist of Increased Am/Pu mass ration (IAP) and depleted Uranium (DU) WRMs. The CEP IAP/DU WRM set provides radioactive material standards for use in combination with 55 gallon drum waste matrix surrogates for the assessment of waste NDA assay system performance. The Production of WRMs is a meticulous process that is not without certain trials and tribulations. Problems may arise at any of the various stages of WRM production which include, but are not limited to; material characterization (physical, chemical, and isotopic), material blend parameters, personnel radiation exposure, gas generation phenomenon, traceability to national standards, encapsulation, statistical evaluation of the data, and others. Presented here is an overall description of the process by which the CEP WRMs were produced and certified as well as discussions pertaining to some of the problems encountered and how they were solved

10 CFR 904.11 - Lay off of energy.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Lay off of energy. 904.11 Section 904.11 Energy DEPARTMENT OF ENERGY GENERAL REGULATIONS FOR THE CHARGES FOR THE SALE OF POWER FROM THE BOULDER CANYON PROJECT Power Marketing § 904.11 Lay off of energy. (a) If any Contractor determines that it is temporarily...

Survey of the state of the art in near-shore pipeline location and burial assessment

International Nuclear Information System (INIS)

Wilkey, P.L.

1991-11-01

Project's objective is to evaluate state-of-the-art methods for locating pipelines in shallow (less than 15 ft) water and for determining and monitoring their burial depths. The following recommendations are made on the research needed in three areas for locating near-shore, shallowly buried pipelines: (1) Sensors: The pipeline industry has selected the magnetic gradiometer array (GA) as a preferred sensor method. Other potential methods exist as backups. No additional research is recommended. (2) Remotely Operated Vehicles (ROVs): The Pipeline Research Committee is pursuing development of a prototype ROV is deliver the GA or other similar equipment to pipeline locations. (3) Phenomena: The data being collected from research on the phenomena affecting seabed conditions and the bathymetric data being collected along the Gulf Coast should be synthesized. This new effort should focus on identifying erosion-prone areas with respect to present and potential future pipeline locations. Technical approach is to get the broadest perspective on the concerns related to the determination of burial conditions for offshore pipelines, Argonne National Laboratory (ANL) contacted individuals and organizations from the gas and petroleum industries, hardware and software vendors, academicians, and representatives from the government. A literature survey yielded the names of persons within academia who are presently working on similar applications with sensors. In the oil and gas industry, individuals and organizations involved in the Pipeline Research Committee made extensive contributions to the review and also provided the names of meaningful contacts from among their vendors. Discussions were held with the various persons both on the telephone and face to face. Vendors provided background materials and overview presentations on their capabilities for ANL to review

Evaluation of the Benefits Attributable to Automotive Lightweight Materials Program Research and Development Projects; TOPICAL

International Nuclear Information System (INIS)

Das, S

2001-01-01

The purpose of this project is to identify and test methods appropriate for estimating the benefits attributable to research and development (R and D) projects funded by the Automotive Lightweight Materials (ALM) Program of the Office of Advanced Automotive Technologies (OAAT) of the U.S. Department of Energy (DOE). Funded projects range from basic materials science research to applied research in production environments. Collaborators on these projects include national laboratories, universities, and private sector firms, such as leading automobile manufacturers and their suppliers. Three ALM R and D projects were chosen for this pilot evaluation: Low-Cost, Continuous Cast Aluminum Sheet; Advanced Forming Technologies for Aluminum; and Manufacturing of Composite Automotive Structures. These projects were chosen because they represent a range of benefits evaluation situations. The first project resulted in an improved process that may be commercialized. The second project is on going and has two distinct components. The third project has yielded an improved technology that has been commercialized. This completed project also benefited from numerous complementary projects

Stand-off laser-induced breakdown spectroscopy of aluminum and geochemical reference materials at pressure below 1 torr

Energy Technology Data Exchange (ETDEWEB)

Lee, Kang-Jae; Choi, Soo-Jin; Yoh, Jack J., E-mail: jjyoh@snu.ac.kr

2014-11-01

Laser-induced breakdown spectroscopy (LIBS) is an atomic emission spectroscopy that utilizes a highly irradiated pulse laser focused on the target surface to produce plasma. We obtain spectroscopic information from the microplasma and determine the chemical composition of the sample based on its elemental and molecular emission peaks. We develop a stand-off LIBS system to analyze the effect of the remote sensing of aluminum and various geochemical reference materials at pressures below 1 torr. Using a commercial 4 inch refracting telescope, our stand-off LIBS system is configured at a distance of 7.2 m from the four United States Geological Survey (USGS) geochemical samples that include granodiorite, quartz latite, shale-cody, and diabase, which are selected for planetary exploration. Prepared samples were mixed with a paraffin binder containing only hydrogen and carbon, and were pelletized for experimental convenience. The aluminum plate sample is considered as a reference prior to using the geochemical samples in order to understand the influence of a low pressure condition on the resulting LIBS signal. A Q-switched Nd:YAG laser operating at 1064 nm and pulsed at 10 Hz with 21.7 to 48.5 mJ/pulse was used to obtain signals, which showed that the geochemical samples were successfully detected by the present stand-off detection scheme. A low pressure condition generally results in a decrease of the signal intensity, while the signal to noise ratio can vary according to the samples and elements of various types. We successfully identified the signals at below 1 torr with stand-off detection by a tightly focused light detection and by using a relatively larger aperture telescope. The stand-off LIBS detection at low pressure is promising for potential detection of the minor elements at pressures below 1 torr. - Highlights: • Stand-off LIBS signals at below 1 torr are compared to those of in-situ conditions. • Vacuum condition provides easier detection of the

Learning from ‘apparent consensus’ in TAC disputes: Exploring knowledge overlaps in LEK and genetic categorization of Atlantic cod

DEFF Research Database (Denmark)

Hedeholm, R. B.; Jacobsen, R. B.; Eg Nielsen, Einar

2016-01-01

and the corresponding genetic categories. However, an examination of existing inshore and off-shore catch surveys confirmed the relevance of the morphological characteristics (liver condition and shape) of ecologically defined inshore and off-shore cod that provided the basis for fishers' categorizations. This opens...

Bringing the Offshore Ashore : Transnational Production, Industrial Relations and the Reconfiguration of Sovereignty

NARCIS (Netherlands)

Lillie, Nathan

This article argues that off-shore is losing its exceptionality by being absorbed into a broader process of variegation and deterritorialization of sovereignty, and that capital's search for a new "fix" is driving this process. Capital goes off-shore by exploiting non-territorial definitions of

Polarization sensitivity testing of off-plane reflection gratings

Science.gov (United States)

Marlowe, Hannah; McEntaffer, Randal L.; DeRoo, Casey T.; Miles, Drew M.; Tutt, James H.; Laubis, Christian; Soltwisch, Victor

2015-09-01

Off-Plane reflection gratings were previously predicted to have different efficiencies when the incident light is polarized in the transverse-magnetic (TM) versus transverse-electric (TE) orientations with respect to the grating grooves. However, more recent theoretical calculations which rigorously account for finitely conducting, rather than perfectly conducting, grating materials no longer predict significant polarization sensitivity. We present the first empirical results for radially ruled, laminar groove profile gratings in the off-plane mount which demonstrate no difference in TM versus TE efficiency across our entire 300-1500 eV bandpass. These measurements together with the recent theoretical results confirm that grazing incidence off-plane reflection gratings using real, not perfectly conducting, materials are not polarization sensitive.

Cross-shore velocity shear, eddies and heterogeneity in water column properties over fringing coral reefs: West Maui, Hawaii

Science.gov (United States)

Storlazzi, C.D.; McManus, M.A.; Logan, J.B.; McLaughlin, B.E.

2006-01-01

A multi-day hydrographic survey cruise was conducted to acquire spatially extensive, but temporally limited, high-resolution, three-dimensional measurements of currents, temperature, salinity and turbidity off West Maui in the summer of 2003 to better understand coastal dynamics along a complex island shoreline with coral reefs. These data complement long-term, high-resolution tide, wave, current, temperature, salinity and turbidity measurements made at a number of fixed locations in the study area starting in 2001. Analyses of these hydrographic data, in conjunction with numerous field observations, evoke the following conceptual model of water and turbidity flux along West Maui. Wave- and wind-driven flows appear to be the primary control on flow over shallower portions of the reefs while tidal and subtidal currents dominate flow over the outer portions of the reefs and insular shelf. When the direction of these flows counter one another, which is quite common, they cause a zone of cross-shore horizontal shear and often form a front, with turbid, lower-salinity water inshore of the front and clear, higher-salinity water offshore of the front. It is not clear whether these zones of high shear and fronts are the cause or the result of the location of the fore reef, but they appear to be correlated alongshore over relatively large horizontal distances (orders of kilometers). When two flows converge or when a single flow is bathymetrically steered, eddies can be generated that, in the absence of large ocean surface waves, tend to accumulate material. Areas of higher turbidity and lower salinity tend to correlate with regions of poor coral health or the absence of well-developed reefs, suggesting that the oceanographic processes that concentrate and/or transport nutrients, contaminants, low-salinity water or suspended sediment might strongly influence coral reef ecosystem health and sustainability.

High organic carbon export precludes eutrophication responses in experimental rocky shore communities

NARCIS (Netherlands)

Barrón, C.; Marbu, N.; Duarte, C.M.; Pedersen, M.F.; Lindblad, C.; Kersting, K.; Moy, F.; Bokn, T.

2003-01-01

We studied the effect of nutrient inputs on the carbon (C) budget of rocky shore communities using a set of eight large experimental mesocosms. The mesocosms received a range of inorganic nitrogen (N) and phosphorus (P) additions, at an N:P ratio of 16. These additions were designed to elevate the

NASA's Exploration Technology Development Program Energy Storage Project Battery Technology Development

Science.gov (United States)

Reid, Concha M.; Miller, Thomas B.; Mercer, Carolyn R.; Jankovsky, Amy L.

2010-01-01

Technical Interchange Meeting was held at Saft America s Research and Development facility in Cockeysville, Maryland on Sept 28th-29th, 2010. The meeting was attended by Saft, contractors who are developing battery component materials under contracts awarded through a NASA Research Announcement (NRA), and NASA. This briefing presents an overview of the components being developed by the contractor attendees for the NASA s High Energy (HE) and Ultra High Energy (UHE) cells. The transition of the advanced lithium-ion cell development project at NASA from the Exploration Technology Development Program Energy Storage Project to the Enabling Technology Development and Demonstration High Efficiency Space Power Systems Project, changes to deliverable hardware and schedule due to a reduced budget, and our roadmap to develop cells and provide periodic off-ramps for cell technology for demonstrations are discussed. This meeting gave the materials and cell developers the opportunity to discuss the intricacies of their materials and determine strategies to address any particulars of the technology.

Biological export of radioactive materials from a leaching pond in SE Idaho

International Nuclear Information System (INIS)

Millard, Jere B.

1978-01-01

A radioecological investigation was conducted to quantify biological export of radioactive materials from a test reactor area leaching pond located on the Idaho National Engineering Laboratory site in southeast Idaho. An estimated 42,000 Ci have been discharged to the pond since 1952. Approximately 35 gamma emitting radionuclides are detectable in unfiltered water. Biomass estimates and mean radionuclide concentrations were determined for major pond compartments. A radionuclide inventory of the pond ecosystem was constructed listing totals for radioactivity present in each compartment. Mean concentrations of predominant radionuclides and population census data were used to estimate biologically exported materials. Particular attention was paid to migrant waterfowl, a resident population of barn swallows (Hirundo rustica), and nesting shore birds. Whole body gamma spectra indicated 15 or more detectable fission and activation products associated with swallows and shore birds, and 20 or more for waterfowl. Concentration factors relative to filtered pond water were also calculated. Finally, biologically exported radioactive materials were compared with total amounts present in the pond. (author)

Project management a systems approach to planning, scheduling, and controlling

CERN Document Server

Kerzner, Harold

2017-01-01

Project Management is the bestselling text for students and professionals, presenting a streamlined approach to project management functions in full alignment with PMI(r)'s latest Project Management Body of Knowledge (PMBOK(r)). This new 12th edition has been updated to reflect the latest changes found in the PMBOK(r) Guide--Sixth Edition, and features new coverage of emerging topics including global stakeholder management, causes of failure, agile project management, project governance failure, customer approval milestones, classifying project metrics, and more. Supplementary materials are available for students, working professionals, and instructors. * Understand organizational structures and project management functions * Learn how to control costs, manage risk, and analyze trade-offs * Examine different methods used for planning, scheduling, QA, and more * Work effectively with customers and stakeholders from around the globe Project Management is the comprehensive reference to keep within arm's reach. ...

Preliminary selection criteria for the Yucca Mountain Project waste package container material

International Nuclear Information System (INIS)

Halsey, W.G.

1991-01-01

The Department of Energy's Yucca Mountain Project (YMP) is evaluating a site at Yucca Mountain in Nevada for construction of a geologic repository for the storage of high-level nuclear waste. Lawrence Livermore National Laboratory's (LLNL) Nuclear Waste Management Project (NWMP) has the responsibility for design, testing, and performance analysis of the waste packages. The design is performed in an iterative manner in three sequential phases (conceptual design, advanced conceptual design, and license application design). An important input to the start of the advanced conceptual design is the selection of the material for the waste containers. The container material is referred to as the 'metal barrier' portion of the waste package, and is the responsibility of the Metal Barrier Selection and Testing task at LLNL. The selection will consist of several steps. First, preliminary, material-independent selection criteria will be established based on the performance goals for the container. Second, a variety of engineering materials will be evaluated against these criteria in a screening process to identify candidate materials. Third, information will be obtained on the performance of the candidate materials, and final selection criteria and quantitative weighting factors will be established based on the waste package design requirements. Finally, the candidate materials will be ranked against these criteria to determine whether they meet the mandated performance requirements, and to provide a comparative score to choose the material for advanced conceptual design activities. This document sets forth the preliminary container material selection criteria to be used in screening candidate materials. 5 refs

Removal efficiency of silver impregnated filter materials and performance of iodie filters in the off-gas of the Karlsruhe reprocessing plant WAK

International Nuclear Information System (INIS)

Herrmann, F.J.; Herrmann, B.; Hoeflich, V.

1997-01-01

An almost quantitative retention of iodine is required in reprocessing plants. For the iodine removal in the off-gas streams of a reprocessing plant various sorption materials had been tested under realistic conditions in the Karlsruhe reprocessing plant WAK in cooperation with the Karlsruhe research center FZK. The laboratory results achieved with different iodine sorption materials justified long time performance tests in the WAK Plant. Technical iodine filters and sorption materials for measurements of iodine had been tested from 1972 through 1992. This paper gives an overview over the most important results, Extended laboratory, pilot plant, hot cell and plant experiences have been performed concerning the behavior and the distribution of iodine-129 in chemical processing plants. In a conventional reprocessing plant for power reactor fuel, the bulk of iodine-129 and iodine-127 is evolved into the dissolver off-gas. The remainder is dispersed over many aqueous, organic and gaseous process and waste streams of the plant. Iodine filters with silver nitrate impregnated silica were installed in the dissolver off-gas of the Karlsruhe reprocessing plant WAK in 1975 and in two vessel vent systems in 1988. The aim of the Karlsruhe iodine research program was an almost quantitative evolution of the iodine during the dissolution process to remove as much iodine with the solid bed filters as possible. After shut down of the WAK plant in December 1990 the removal efficiency of the iodine filters at low iodine concentrations had been investigated during the following years. 12 refs., 2 figs., 2 tabs

Removal efficiency of silver impregnated filter materials and performance of iodie filters in the off-gas of the Karlsruhe reprocessing plant WAK

Energy Technology Data Exchange (ETDEWEB)

Herrmann, F.J.; Herrmann, B.; Hoeflich, V. [Wiederaufarbeitungsanlage Karlsruhe (Germany)] [and others

1997-08-01

An almost quantitative retention of iodine is required in reprocessing plants. For the iodine removal in the off-gas streams of a reprocessing plant various sorption materials had been tested under realistic conditions in the Karlsruhe reprocessing plant WAK in cooperation with the Karlsruhe research center FZK. The laboratory results achieved with different iodine sorption materials justified long time performance tests in the WAK Plant. Technical iodine filters and sorption materials for measurements of iodine had been tested from 1972 through 1992. This paper gives an overview over the most important results, Extended laboratory, pilot plant, hot cell and plant experiences have been performed concerning the behavior and the distribution of iodine-129 in chemical processing plants. In a conventional reprocessing plant for power reactor fuel, the bulk of iodine-129 and iodine-127 is evolved into the dissolver off-gas. The remainder is dispersed over many aqueous, organic and gaseous process and waste streams of the plant. Iodine filters with silver nitrate impregnated silica were installed in the dissolver off-gas of the Karlsruhe reprocessing plant WAK in 1975 and in two vessel vent systems in 1988. The aim of the Karlsruhe iodine research program was an almost quantitative evolution of the iodine during the dissolution process to remove as much iodine with the solid bed filters as possible. After shut down of the WAK plant in December 1990 the removal efficiency of the iodine filters at low iodine concentrations had been investigated during the following years. 12 refs., 2 figs., 2 tabs.

Materials Development Program: Ceramic Technology Project bibliography, 1984--1992

Energy Technology Data Exchange (ETDEWEB)

1994-03-01

The Ceramic Technology [for Advanced Heat Engines] Project was begun in 1983 to meet the ceramic materials needs of the companion DOE automotive engine program, the Advanced Gas Turbine (AGT) project, and the Heavy Duty Transport (low-heat-rejection, heavy-duty diesel) project. Goal is to develop an industry technology base for reliable and cost effective ceramics for applications in advanced automotive gas turbine and diesel engines. Research areas were identified following extensive input from industry and academia. Majority of research is done by industry (60%); work is also done at colleges and universities, in-house, and at other national laboratories and government agencies. In the beginning, reliability of ceramic components was the key issue. The reliability issues have largely been met and, at the present time, cost is the driving issue, especially in light of the highly cost-sensitive automotive market. Emphasis of the program has now been shifted toward developing cost-effective ceramic components for high-performance engines in the near-term. This bibliography is a compilation of publications done in conjunction with the Ceramic Technology Project since its beginning. Citations were obtained from reports done by participants in the project. We have tried to limit citations to those published and easily located. The end date of 1992 was selected.

InterScience and fusion: Projects, collaborations, and spin-offs

International Nuclear Information System (INIS)

Castracane, J.

1995-01-01

InterScience, Inc. is a small, high technology research and development company which participates in the mission of the fusion energy research program in a variety of ways. The company specializes in basic physics and advanced technologies applied to research and commercial opportunities. InterScience has numerous federal and private sponsors for research and development activities in plasma physics, electro-optics, materials science, electronics, and biomedical engineering. The company currently has several direct research and development projects which involve the assembly of diagnostic hardware for installation and operation at tokamak facilities both in the U.S. and abroad. In addition, the company works in a technical support capacity for both the magnetic and inertial confinement fusion programs. Successful participation in the Small Business Innovation Research (SBIR) program has provided an avenue for the transfer of expertise from the fusion program to alternate agencies and research areas. Examples of this include fiberoptic sensors with data acquisition systems, advanced spectral imaging and image processing, fiberoptic imaging interferometry for biomedical instrumentation development and, micro-electro-mechanical systems

Shore Side Electricity in Europe: Potential and environmental benefits

International Nuclear Information System (INIS)

Winkel, R.; Weddige, U.; Johnsen, D.; Hoen, V.; Papaefthimiou, S.

2016-01-01

In the context of reducing emissions from the transport sector, the EU Commission envisions a strong modal shift to energy efficient modes including maritime shipping and inland shipping, as an alternative for road transport. In view of the expected growth of the sector, the emissions from waterborne transport are a key concern. When at berth, ships typically use their auxiliary engines to generate electrical power for communications, lighting, ventilation and other on-board equipment. The extended use of vessels’ auxiliary engines augments greenhouse gas (GHG) emissions and air pollution in the adjacent ports, which are typically located in or near densely populated areas, thus leading to dangerous health and environmental effects. Shore Side Electricity (SSE) is an option for reducing the unwanted environmental impacts of ships at berth, i.e. GHG emissions, other air pollutants (NO_x, SO_x, PM) and noise of ships using their auxiliary engines. This paper quantifies the economic and environmental potential for SSE in Europe, through detailed estimation of in-port ships’ emissions and relevant energy demand, providing an insight of the expected barriers for implementation and formulating recommendations on policy actions that could accelerate the implementation of SSE in European harbors. - Highlights: • We model Shore Side Electricity (SSE) options for ports in the European region. • The economic and environmental potential for SSE in Europe is quantified. • The expected barriers for wide implementation of SSE are depicted. • We recommend policy actions that could accelerate SSE implementation.

Material Implications of Rural Electrification—A Methodological Framework to Assess In-Use Stocks of Off-Grid Solar Products and EEE in Rural Households in Bangladesh

Directory of Open Access Journals (Sweden)

Alexander Batteiger

2018-02-01

Full Text Available “Universal access to electricity” is proclaimed as the seventh sustainable development goal (SDG 7 of the United Nations (UN Sustainable Development Goals list. The achievement of this goal will result in a rapid diffusion of energy technologies that would in turn increase materials stocks, subsequently increase the raw material demand as well as the arising waste flows. This study describes a methodological framework to assess in-use stocks of off-grid solar products and electrical and electronic equipment (EEE for rural communities in developing countries. The methodology is based on energy-access data. Furthermore, the specifics of the characteristics of off-grid solar products are discussed. The methodology is applied to rural Bangladesh and its solar home system (SHS program. By the end of 2016, around 4.1 million SHSs were installed. This type of access to electricity has a significant impact on the in-use stocks, as households add the comparatively heavy SHSs to their in-use stocks. In-use stocks of EEE, in general, are low. Off-grid solar products are lighter than standard EEE, and fewer products types are available. These findings will help to better understand material stocks and future waste flows in the given context and will support the adaption of recycling infrastructures.

Olefin recovery from FCC off-gas can pay off

International Nuclear Information System (INIS)

Brahn, M.G.

1992-01-01

This paper reports on olefins recovery from refinery FCC offgas streams which offers an attractive cash flow from olefins from a tail-gas stream that has typically been consumed as refinery fuel. Such recovery schemes can be employed in refineries or olefins plants, and can be tailored to fit individual requirements. Mobil Chemical Co. has operated such a dephlegmator-based off-gas recovery unit at its Beaumont, Tex., olefin plant since 1987. It reported that the project was paid out within 11 months of initial start-up

Few fish but many fishers: a case study of shore-based recreational ...

African Journals Online (AJOL)

Using a roving creel survey over 12 months, 3 765 shore-anglers were checked for catch and fishing effort information and a further 603 shoreanglers were interviewed using a detailed questionnaire. Fishing effort was higher on weekends (119 anglers per count) than during the week (37 anglers per count). The total ...

Long-term trends in the competitive shore fishery along the KwaZulu ...

African Journals Online (AJOL)

Twenty-four years (1977–2000) of competitive shore angling catch and effort data from the KwaZulu-Natal Coastal Anglers Union for the province of KwaZulu-Natal were analysed. Of a minimum of 117 species recorded, the most commonly caught species were dusky shark (Carcharhinus obscurus) (26%), milk shark ...

Hemigrapsus takanoi Asakura and Watanabe, 2005 (Crustacea: Decapoda: Brachyura: Grapsoidea): first records of the brush-clawed shore crab from Great Britain

OpenAIRE

Wood, C. A.; Bishop, J. D. D.; Davies, Clare J.; Delduca, E. L.; Hatton, J. C.; Herbert, Roger J.H.; Clark, P. F.

2015-01-01

The brush-clawed shore crab is reported from the River Medway, Kent and the River Colne, Essex, England. These represent the first records of Hemigrapsus takanoi Asakura and Watanabe, 2005 from Great Britain. If H. takanoi becomes established in GB, it may pose a threat to populations of the native shore crab Carcinus maenas.

Evaluation of 10 cross-shore sediment transport morphological models

CSIR Research Space (South Africa)

Schoonees, JS

1995-05-01

Full Text Available .S. Schoonees, A.K. Theron/Coastal Engineering 25 (1995) 141 11 0.99 m shore transport rate above mean sea level during the storm < 123 m3/m 0 m < storm surge < 3.2 m 4.2 h..., are beach and dune erosion that occurs under storm waves and high water levels, prediction of set-back lines, adjustment of beach-fill to long-term wave action and the prediction of sediment build-up or beach profile...

Decomposition of sinking proteinaceous material during fall in the oxygen minimum zone off northern Chile

Science.gov (United States)

Pantoja, Silvio; Sepúlveda, Julio; González, Humberto E.

2004-01-01

We investigated the fate of sinking proteinaceous material in the oxygen minimum zone off northern Chile by deploying sediment traps at 30 m (base of the oxygenated layer) and 300 m (bottom of the O 2-depleted layer) during a 3-day experiment. Most of photosynthetically produced protein (82%) degraded in the top 30 m; an additional 15% decayed between 30 and 300 m, within the suboxic zone; and ca. 1% reached surface sediments at 1200 m depth. Sinking protein remained diagenetically labile in the top 300-m of the water column, as indicated by degradation indices and degradation rate constants of trap material, both characteristic of fresh material. We conclude that particulate protein degradation is not affected by the occurrence of the suboxic layer between 30 and 300 m in the water column. This conclusion is consistent with a model of degradation of particulate protein controlled by extracellular enzymatic hydrolysis and not dependent on O 2 availability. Assuming that our fall results are representative for an annual cycle and the whole oxygen minimum zone, suboxic decay of sinking protein in the oxygen minimum zone could support a production of 2 Tg N 2 yr -1, consistent with independent estimates of denitrification rates in the area.

Spin-off technologies developed through nuclear activities

International Nuclear Information System (INIS)

1993-01-01

Given the changing role of government research establishments and the interest in maximizing return on capital and intellectual investment, determining the best way to apply or ''spin-off'' technologies from the nuclear field into other industrial and commercial sectors is of increasing concern. This study by the OECD Nuclear Energy Agency draws on expertise from numerous countries to determine what the spin-offs are, where they come from, and how they can best be fostered. It looks both at the results and process of spin-offs, and helps decision-makers in government and project leaders and managers in industry to maximize their benefits. (author)

Deposits of naturally occurring radioactivity in production of oil and natural gas

International Nuclear Information System (INIS)

Strand, T.; Lysebo, I.; Kristensen, D.; Birovljev, A.

1997-01-01

Deposits of naturally occurring radioactive materials is an increasing problem in Norwegian oil and gas production. Activity concentration in solid-state samples and production water, and doses to workers involved in different operations off-shore, have been measured. The report also includes a discussion of different methods of monitoring and alternatives for final disposal of wastes. 154 refs

Deposits of naturally occurring radioactivity in production of oil and natural gas; Radioaktive avleiringer i olje- og gassproduksjon

Energy Technology Data Exchange (ETDEWEB)

Strand, T; Lysebo, I; Kristensen, D; Birovljev, A

1997-01-01

Deposits of naturally occurring radioactive materials is an increasing problem in Norwegian oil and gas production. Activity concentration in solid-state samples and production water, and doses to workers involved in different operations off-shore, have been measured. The report also includes a discussion of different methods of monitoring and alternatives for final disposal of wastes. 154 refs.

Managing European Cross Border Cooperation Projects on Sustainability: A Focus on MESP Project

Directory of Open Access Journals (Sweden)

Corrado Schenone

2017-01-01

Full Text Available International cooperation is a must to achieve the goal of sustainable development, since only through cross border actions’ complex issues like environmental degradation can be faced. Supranational initiatives and shared objectives are the only path for getting a durable and effective green strategy, which transcends boundaries or governments and fosters a common effort for sustainability through networking. The European Neighborhood and Partnership Instrument (ENPI aims at reinforcing cooperation between the European Union (EU and partner countries’ regions placed along the shores of the Mediterranean Sea. To this extent, MESP (Managing the Environmental Sustainability of Ports for a durable development can be considered as a typical cross border cooperation project, willing to create a sustainable environmental management of port in northern and southern shores of the Mediterranean basin. This has been achieved through the development of specific guidelines towards environmental sustainability and the collection of common tools, methodologies, good practices and innovations focused on pollution reduction that can be replicated in Mediterranean ports and further. This was possible through the creation of a strong cooperation network and long-lasting collaborations among partners and stakeholders such as harbour cities, port authorities, universities, research centres and scientific skills.

Cold Regions Issues for Off-Road Autonomous Vehicles

Science.gov (United States)

2004-04-01

the operation of off-road autonomous vehicles . Low-temperature effects on lubricants, materials, and batteries can impair a robot’s ability to operate...demanding that off-road autonomous vehicles must be designed for and tested in cold regions if they are expected to operate there successfully.

Near shore seismic movements induced by seaquakes using the boundary element method

Institute of Scientific and Technical Information of China (English)

Manuel Carbajal-Romero; Norberto Flores-Guzmán; J.Efraín Rodríguez-Sánchez; Andriy Kryvko

2017-01-01

This study quantifies seismic amplifications in near-shore arising from seaquakes.Within the Boundary Element Method,boundary elements are used to irradiate waves and force densities obtained for each element.Huygens Principle is implemented since the diffracted waves are constructed at the boundary from which they are radiated,which is equivalent to Somigliana's theorem.Application of boundary conditions leads to a system of integral equations of the Fredholm type of second kind and zero order.Several numerical configurations are analyzed:The first is used to verify the present formulation with ideal sea floor configurations to estimate seismic amplifications.With the formulation verified,simple slope configurations are studied to estimate spectra of seismic motions.It is found that P-waves can produce seismic amplifications from 1.2 to 3.9 times the amplitude of the incident wave.SV-waves can generate seismic amplifications up to 4.5 times the incident wave.Another relevant finding is that the highest amplifications are at the shore compared to the ones at the sea floor.

Fast three-material modeling with triple arch projection for electronic cleansing in CTC.

Science.gov (United States)

Lee, Hyunna; Lee, Jeongjin; Kim, Bohyoung; Kim, Se Hyung; Shin, Yeong-Gil

2014-07-01

In this paper, we propose a fast three-material modeling for electronic cleansing (EC) in computed tomographic colonography. Using a triple arch projection, our three-material modeling provides a very quick estimate of the three-material fractions to remove ridge-shaped artifacts at the T-junctions where air, soft-tissue (ST), and tagged residues (TRs) meet simultaneously. In our approach, colonic components including air, TR, the layer between air and TR, the layer between ST and TR (L(ST/TR)), and the T-junction are first segmented. Subsequently, the material fraction of ST for each voxel in L(ST/TR) and the T-junction is determined. Two-material fractions of the voxels in L(ST/TR) are derived based on a two-material transition model. On the other hand, three-material fractions of the voxels in the T-junction are estimated based on our fast three-material modeling with triple arch projection. Finally, the CT density value of each voxel is updated based on our fold-preserving reconstruction model. Experimental results using ten clinical datasets demonstrate that the proposed three-material modeling successfully removed the T-junction artifacts and clearly reconstructed the whole colon surface while preserving the submerged folds well. Furthermore, compared with the previous three-material transition model, the proposed three-material modeling resulted in about a five-fold increase in speed with the better preservation of submerged folds and the similar level of cleansing quality in T-junction regions.

Generation IV and transmutation materials (GETMAT) project: First assessment of selected results

International Nuclear Information System (INIS)

Fazio, Concetta; Serrano, Marta; Gessi, Alessandro; Henry, Jean; Malerba, Lorenzo

2015-01-01

The Generation IV and Transmutation Material (GETMAT) project has been initiated within the 7. EURATOM framework programme with the objective to support the development of innovative reactor designs. Emphasis has been put on the investigation, both in the theoretical and experimental domains, of selected material properties that are cross-cutting among the various Generation IV and Transmutation systems. The selection of the properties to be investigated has been performed by identifying relevant conditions of key components as cores and primary systems. Moreover, taking into account the envisaged conditions of these components it turned out that innovative materials might be a better choice with respect to conventional nuclear grade steels. Therefore, ODS alloys and 9-12 Cr Ferritic/Martensitic (F/M) steels have been selected as reference for the GETMAT project. The R and D activities have been focused on basic characterisation of ODS alloys produced ad hoc for the project and on an extensive PIE programme of F/M steels irradiated in previous programmes. Finally, first principle modelling studies to explain irradiation hardening and embrittlement of F/M alloys were an additional important task. The objective of this manuscript is to make a first assessment of the results obtained within GETMAT. (authors)

The Off-Site Plowshare and Vela Uniform Programs: Assessing Potential Environmental Liabilities through an Examination of Proposed Nuclear Projects,High Explosive Experiments, and High Explosive Construction Activities Volume 1 of 3

Energy Technology Data Exchange (ETDEWEB)

Beck Colleen M,Edwards Susan R.,King Maureen L.

2011-09-01

This document presents the results of nearly six years (2002-2008) of historical research and field studies concerned with evaluating potential environmental liabilities associated with U.S. Atomic Energy Commission projects from the Plowshare and Vela Uniform Programs. The Plowshare Program's primary purpose was to develop peaceful uses for nuclear explosives. The Vela Uniform Program focused on improving the capability of detecting, monitoring and identifying underground nuclear detonations. As a result of the Project Chariot site restoration efforts in the early 1990s, there were concerns that there might be other project locations with potential environmental liabilities. The Desert Research Institute conducted archival research to identify projects, an analysis of project field activities, and completed field studies at locations where substantial fieldwork had been undertaken for the projects. Although the Plowshare and Vela Uniform nuclear projects are well known, the projects that are included in this research are relatively unknown. They are proposed nuclear projects that were not executed, proposed and executed high explosive experiments, and proposed and executed high explosive construction activities off the Nevada Test Site. The research identified 170 Plowshare and Vela Uniform off-site projects and many of these had little or no field activity associated with them. However, there were 27 projects that merited further investigation and field studies were conducted at 15 locations.

The Off-Site Plowshare and Vela Uniform Programs: Assessing Potential Environmental Liabilities through an Examination of Proposed Nuclear Projects,High Explosive Experiments, and High Explosive Construction Activities Volume 2 of 3

Energy Technology Data Exchange (ETDEWEB)

Beck Colleen M.,Edwards Susan R.,King Maureen L.

2011-09-01

This document presents the results of nearly six years (2002-2008) of historical research and field studies concerned with evaluating potential environmental liabilities associated with U.S. Atomic Energy Commission projects from the Plowshare and Vela Uniform Programs. The Plowshare Program's primary purpose was to develop peaceful uses for nuclear explosives. The Vela Uniform Program focused on improving the capability of detecting, monitoring and identifying underground nuclear detonations. As a result of the Project Chariot site restoration efforts in the early 1990s, there were concerns that there might be other project locations with potential environmental liabilities. The Desert Research Institute conducted archival research to identify projects, an analysis of project field activities, and completed field studies at locations where substantial fieldwork had been undertaken for the projects. Although the Plowshare and Vela Uniform nuclear projects are well known, the projects that are included in this research are relatively unknown. They are proposed nuclear projects that were not executed, proposed and executed high explosive experiments, and proposed and executed high explosive construction activities off the Nevada Test Site. The research identified 170 Plowshare and Vela Uniform off-site projects and many of these had little or no field activity associated with them. However, there were 27 projects that merited further investigation and field studies were conducted at 15 locations.

The Off-Site Plowshare and Vela Uniform Programs: Assessing Potential Environmental Liabilities through an Examination of Proposed Nuclear Projects,High Explosive Experiments, and High Explosive Construction Activities Volume 3 of 3

Energy Technology Data Exchange (ETDEWEB)

Beck Colleen M.,Edwards Susan R.,King Maureen L.

2011-09-01

This document presents the results of nearly six years (2002-2008) of historical research and field studies concerned with evaluating potential environmental liabilities associated with U.S. Atomic Energy Commission projects from the Plowshare and Vela Uniform Programs. The Plowshare Program's primary purpose was to develop peaceful uses for nuclear explosives. The Vela Uniform Program focused on improving the capability of detecting, monitoring and identifying underground nuclear detonations. As a result of the Project Chariot site restoration efforts in the early 1990s, there were concerns that there might be other project locations with potential environmental liabilities. The Desert Research Institute conducted archival research to identify projects, an analysis of project field activities, and completed field studies at locations where substantial fieldwork had been undertaken for the projects. Although the Plowshare and Vela Uniform nuclear projects are well known, the projects that are included in this research are relatively unknown. They are proposed nuclear projects that were not executed, proposed and executed high explosive experiments, and proposed and executed high explosive construction activities off the Nevada Test Site. The research identified 170 Plowshare and Vela Uniform off-site projects and many of these had little or no field activity associated with them. However, there were 27 projects that merited further investigation and field studies were conducted at 15 locations.

Spin-offs of the Third Mission and social innovation: the case study of the research–training–intervention project of Geodata Ltd

Directory of Open Access Journals (Sweden)

Del Gottardo Ezio

2016-12-01

Full Text Available As a result of enactment of Law 297/1999, many Italian universities could improve the opportunities in applied research, activating spin-offs and start-ups in conformity with those regulations. This is a new challenge in the universities’ mission: universities are capable (and therefore they are asked to generate not only new knowledge and competent professional profiles, but also to make a new effort in implementing the “third mission” for promoting social innovation. Considering this background, we present a research project - a training intervention named “Participatory culture, personal branding and organisational wellness” - by Espéro Pvt, a spin-off of the University of Salento, for Geodata Engineering Ltd., located in Turin, Italy. Presented below are the theoretical framework (learning organisation, empowerment evaluation and organisational wellness and the methodology, as well as the first results.

76 FR 41308 - Strata Energy, Inc., Ross In Situ Recovery Uranium Project, Crook County, WY; Notice of Materials...

Science.gov (United States)

2011-07-13

..., Inc., Ross In Situ Recovery Uranium Project, Crook County, WY; Notice of Materials License Application...-4737, or by e-mail to [email protected] . The Ross In Situ Recovery Uranium Project License... source and byproduct materials license at its Ross In Situ Recovery Uranium Project site located in Crook...

General and special engineering materials science. Vol. 3

International Nuclear Information System (INIS)

Ondracek, G.; Hofmann, P.

1983-04-01

The report about general and special engineering materials science is the result of lectures given by the authors in two terms in 1982 at Instituto Balseiro, San Carlos de Bariloche, the graduated college of the Universidad de Cuyo and Comision Nacional de Energia Atomica, Republica Argentina. These lectures were organised in the frame of the project ''nuclear engineering'' (ARG/78/020) of the United Nations Development Program (UNDP) by the International Atomic Energy Agency (IAEA). Some chapters of the report are written in English, others in Spanish. The report is subdivided into three volumes. The present volume III concerns special engineering materials science and considers nuclear materials with respect to off-normal (''accident'') reactor operation conditions including nuclear materials in loss-of-coolant accident and nuclear materials in core melt accidents. (orig./IHOE) [de

Increase in density of genetically diverse invasive Asian shore crab (Hemigrapsus sanguineus) populations in the Gulf of Maine.

Science.gov (United States)

Lord, Joshua P; Williams, Larissa M

2017-04-01

Hemigrapsus sanguineus , the Asian shore crab, has rapidly replaced Carcinus maenas , the green crab, as the most abundant crab on rocky shores in the northwest Atlantic since its introduction to the United States (USA) in 1988. The northern edge of this progressing invasion is the Gulf of Maine, where Asian shore crabs are only abundant in the south. We compared H. sanguineus population densities to those from published 2005 surveys and quantified genetic variation using the cytochrome c oxidase subunit I gene. We found that the range of H. sanguineus had extended northward since 2005, that population density had increased substantially (at least 10-fold at all sites), and that Asian shore crabs had become the dominant intertidal crab species in New Hampshire and southern Maine. Despite the significant increase in population density of H. sanguineus , populations only increased by a factor of 14 in Maine compared to 70 in southern New England, possibly due to cooler temperatures in the Gulf of Maine. Genetically, populations were predominantly composed of a single haplotype of Japanese, Korean, or Taiwanese origin, although an additional seven haplotypes were found. Six of these haplotypes were of Asian origin, while two are newly described. Large increases in population sizes of genetically diverse individuals in Maine will likely have a large ecological impact, causing a reduction in populations of mussels, barnacles, snails, and other crabs, similar to what has occurred at southern sites with large populations of this invasive crab species.

Holocene and Late Glacial sedimentation near steep slopes in southern Lake Baikal

Directory of Open Access Journals (Sweden)

Michael Sturm

2015-07-01

Full Text Available We here present new data on sedimentation at and near the steep north-slopes of southern Lake Baikal. Short sediment cores were taken at 550 m and at 1366 m water depth, within 3600 m offshore Cape Ivanovskii at the station of the Baikal Deep Underwater NEUTRINO Telescope. The sediments within 3600 m off the northern coast of Southern Lake Baikal are dominated by pelagic deposition. Our data reveal surprisingly little influence from terrigenous material from adjacent coastal areas, tributaries and their catchment. At the shallow-water site (at 550 m water depth, 700 m off shore just 27 cm thick homogenous sediments have accumulated during the Holocene on top of Pleistocene deposits resulting in Holocene sedimentation rates of 0.003 cm a-1. The very low rates are caused by long-term persistent winnowing of fine particles caused by week contour currents along the slope. The uppermost sediments are oxidized down to 22 cm. Very low concentrations of Corg, Sibio and Ntot in Pleistocene sediments increase dramatically within the Holocene. The heavy mineral fraction of the shallow-water sediments contains up to 33.6 % olivine and up to 2.4 % spinel. These rare minerals originate from white marbles of the nearby coastal outcrop Belaya Vyemka of the Early Precambrian Sharyzalgaiskaya Series. At the deep-water site (at 1366 m water depth, 3600 m off shore Holocene sedimentation rates are 10-times higher (0.036 cm a-1. Sediment oxidation occurs just within the uppermost 2 cm. Of the two rare type minerals of the Sharyzalgaiskaya Series spinel does not occur at all and olivine is represented by very diminished concentrations. This indicates insignificant influx of terrestrial material from the nearby shore to the deep-water site . Distal turbidites of far-off sources are intercalated to pelagic sediments at the deep-water site. Breakdown events of deltas at the SE- and S-coast of the basin are suggested to be responsible for the formation of the turbidites

On-Shore Central Hydraulic Power Generation for Wind and Tidal Energy

Science.gov (United States)

Jones, Jack A.; Bruce, Allan; Lim, Steven; Murray, Luke; Armstrong, Richard; Kimbrall, Richard; Cook-Chenault, Kimberly; DeGennaro, Sean

2012-01-01

Tidal energy, offshore wind energy, and onshore wind energy can be converted to electricity at a central ground location by means of converting their respective energies into high-pressure hydraulic flows that are transmitted to a system of generators by high-pressure pipelines. The high-pressure flows are then efficiently converted to electricity by a central power plant, and the low-pressure outlet flow is returned. The Department of Energy (DOE) is presently supporting a project led by Sunlight Photonics to demonstrate a 15 kW tidal hydraulic power generation system in the laboratory and possibly later submerged in the ocean. All gears and submerged electronics are completely eliminated. A second portion of this DOE project involves sizing and costing a 15 MW tidal energy system for a commercial tidal energy plant. For this task, Atlantis Resources Corporation s 18-m diameter demonstrated tidal blades are rated to operate in a nominal 2.6 m/sec tidal flow to produce approximately one MW per set of tidal blades. Fifteen units would be submerged in a deep tidal area, such as in Maine s Western Passage. All would be connected to a high-pressure (20 MPa, 2900 psi) line that is 35 cm ID. The high-pressure HEPG fluid flow is transported 500-m to on-shore hydraulic generators. HEPG is an environmentally-friendly, biodegradable, watermiscible fluid. Hydraulic adaptations to ORPC s cross-flow turbines are also discussed. For 15 MW of wind energy that is onshore or offshore, a gearless, high efficiency, radial piston pump can replace each set of top-mounted gear-generators. The fluid is then pumped to a central, easily serviceable generator location. Total hydraulic/electrical efficiency is 0.81 at full rated wind or tidal velocities and increases to 0.86 at 1/3 rated velocities.

Automatic Data Collection Design for Real-time Detection of Oil

African Journals Online (AJOL)

ES Obe

Niger Delta region in Nigeria where crude oil is produced both on-shored and off- ... National Emergency Management Agency (NEMA) and involves huge ... mangrove, thick forest and off-shore areas of the Nation offers the much ... oil have been spilled into the environment ... linking some 275 flow stations to various.

Final Scientific/Technical Report: ADVANCED INTEGRATION OF POWER TAKE-OFF IN VIVACE

Energy Technology Data Exchange (ETDEWEB)

Simiao, Gustavo

2014-03-21

Vortex Hydro Energy is commercializing a University of Michigan patented MHK device, the VIVACE converter (Vortex Induced Vibration Aquatic Clean Energy). Unlike water turbines, it does not use propeller blades. Rather, river or ocean currents flow around cylinders causing them to move up and down in Flow Induced Motions (FIM). This kinetic energy of the cylinder is then converted to electricity. Importantly, the VIVACE converter is simpler in design and more cost effective than water turbines. This project accelerated the development of the VIVACE technology. Funding from the DOE enabled VHE to accelerate the development in three ways. One was to increase the efficiency of the hydrodynamics of the system. This aided in maximizing the power output for a wide range of water speeds. The second was to design, build, and test an efficient power take-off (PTO) that converted the most power from the VIVACE cylinders into electricity. This effort was necessary because of the nature of power generated using this technology. Although the PTO uses off-the-shelf components, it is specifically tuned to the specific water flow characteristics. The third way the development was accelerated was by testing the improved Beta 1B prototype over a longer period of time in a river. The greatest benefit from the longer open-water testing-period is a better understand of the power generation characteristics of the system as well as the maintenance lifespan of the device. Renewable energy generation is one of today’s most challenging global dilemmas. The energy crisis requires tapping into every source of energy and developing every technology that can generate energy at a competitive cost within the next 50 years. Development of VIVACE will bolster domestic energy security and mitigate global climate change. There are numerous commercial and military applications for a fully developed system, which could generate clean/renewable energy from small scale (1-5kW) to medium scale (500k

Modulation of transcription factor binding and epigenetic regulation of the MLH1 CpG island and shore by polymorphism rs1800734 in colorectal cancer.

Science.gov (United States)

Savio, Andrea J; Bapat, Bharati

2017-06-03

The MLH1 promoter polymorphism rs1800734 is associated with MLH1 CpG island hypermethylation and expression loss in colorectal cancer (CRC). Conversely, variant rs1800734 is associated with MLH1 shore, but not island, hypomethylation in peripheral blood mononuclear cell DNA. To explore these distinct patterns, MLH1 CpG island and shore methylation was assessed in CRC cell lines stratified by rs1800734 genotype. Cell lines containing the variant A allele demonstrated MLH1 shore hypomethylation compared to wild type (GG). There was significant enrichment of transcription factor AP4 at the MLH1 promoter in GG and GA cell lines, but not the AA cell line, by chromatin immunoprecipitation studies. Preferential binding to the G allele was confirmed by sequencing in the GA cell line. The enhancer-associated histone modification H3K4me1 was enriched at the MLH1 shore; however, H3K27ac was not, indicating the shore is an inactive enhancer. These results demonstrate the role of variant rs1800734 in altering transcription factor binding as well as epigenetics at regions beyond the MLH1 CpG island in which it is located.

Conceptual design report: Nuclear materials storage facility renovation. Part 1, Design concept. Part 2, Project management

International Nuclear Information System (INIS)

1995-01-01

The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL's weapons research, development, and testing (WRD ampersand T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL's inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This document provides Part I - Design Concept which describes the selected solution, and Part II - Project Management which describes the management system organization, the elements that make up the system, and the control and reporting system

Conceptual design report: Nuclear materials storage facility renovation. Part 1, Design concept. Part 2, Project management

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-14

The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This document provides Part I - Design Concept which describes the selected solution, and Part II - Project Management which describes the management system organization, the elements that make up the system, and the control and reporting system.

Decapod crustaceans from rocky shore at Farol Island, Matinhos, Paraná, Brazil. I: temporal distribution of population densities

OpenAIRE

Masunari, Setuko; Oliveira, Edinalva; Kowalczuk, Vânia Graciele Lezan

1998-01-01

A study of the temporal distribution of the decapod populations from a rocky shore at Farol Isle, Matinhos, State of Paraná, Brazil (25o51'S e48o32'W) was carried out. The rocky shore is 13m wide when the tidal level is zero meter and about 8o inclination. In the supralittoral, the rocky basins is mostly covered by a layer of litter coming from the terrestrial environment. In the midlittoral and upper infralittoral, the rocky slope is overlayed by boulders and pebbles and they constitute a hi...

Quality assurance in the production of pipe fittings by automatic laser-based material identification

Science.gov (United States)

Moench, Ingo; Peter, Laszlo; Priem, Roland; Sturm, Volker; Noll, Reinhard

1999-09-01

In plants of the chemical, nuclear and off-shore industry, application specific high-alloyed steels are used for pipe fittings. Mixing of different steel grades can lead to corrosion with severe consequential damages. Growing quality requirements and environmental responsibilities demand a 100% material control in the production of the pipe fittings. Therefore, LIFT, an automatic inspection machine, was developed to insure against any mix of material grades. LIFT is able to identify more than 30 different steel grades. The inspection method is based on Laser-Induced Breakdown Spectrometry (LIBS). An expert system, which can be easily trained and recalibrated, was developed for the data evaluation. The result of the material inspection is transferred to an external handling system via a PLC interface. The duration of the inspection process is 2 seconds. The graphical user interface was developed with respect to the requirements of an unskilled operator. The software is based on a realtime operating system and provides a safe and reliable operation. An interface for the remote maintenance by modem enables a fast operational support. Logged data are retrieved and evaluated. This is the basis for an adaptive improvement of the configuration of LIFT with respect to changing requirements in the production line. Within the first six months of routine operation, about 50000 pipe fittings were inspected.

Sensing and collecting radioactive materials as a project to teach engineering design

International Nuclear Information System (INIS)

Drake, D.; Majdi, T.; Strack, J.

2015-01-01

The remote detection and isolation of radioactive materials is both a challenging engineering design project and a relevant issue given modern nuclear circumstances. This project is used in the undergraduate capstone class of the Engineering Physics Department at McMaster University to teach students engineering design. This paper discusses the course outline and learning outcomes of the students who took the course over the 2014-2015 academic year. (author)

Sensing and collecting radioactive materials as a project to teach engineering design

Energy Technology Data Exchange (ETDEWEB)

Drake, D.; Majdi, T.; Strack, J., E-mail: draked2@mcmaster.ca [McMaster University, Hamiltion, ON (Canada); and others

2015-07-01

The remote detection and isolation of radioactive materials is both a challenging engineering design project and a relevant issue given modern nuclear circumstances. This project is used in the undergraduate capstone class of the Engineering Physics Department at McMaster University to teach students engineering design. This paper discusses the course outline and learning outcomes of the students who took the course over the 2014-2015 academic year. (author)

Dynamics and control of multi-terminal HVDC systems for off-shore wind farm integration

Energy Technology Data Exchange (ETDEWEB)

Ciapessoni, E.; Cirio, D.; Gatti, A.; Pitto, A. [Ricerca sul Sistema Energetico SpA (RSE), Milan (Italy)

2011-07-01

This paper addresses dynamic modelling aspects concerning the operation of VSC-based MTDC networks connecting large offshore wind farms to mainland AC system. In particular, stability issues of the AC-DC system under severe contingencies such as AC fault on mainland side, DC cable faults, and loss of offshore VSC terminal are analysed, and possible stabilising controls are identified. The propose model includes the basic and control strategies for converters on mainland and offshore side, and an additional global control which simulates the action of SPS-Special Protection System. Simulations are performed on a test system implemented in DIgSILENT Power Factory platform, including the proposed control systems and detailed models of wind turbine DFIGs. The work has been carried out within the FP7 European research project ''TWENTIES''. (orig.)

Project management plan, Hazardous Materials Management and Emergency Response Training Center

International Nuclear Information System (INIS)

Borgeson, M.E.

1994-01-01

For the next 30 years, the main activities at the Hanford Site will involve the handling and cleanup of toxic substances. Thousands of workers involved in these new activities will need systematic training appropriate to their tasks and associated risks. This project is an important part of the Hanford Site mission and will enable the US Department of Energy (DOE) to meet high standards for safety. The Hazardous Materials Management and Emergency Response Training Center (HAMMER) project will construct a centralized regional training center dedicated to training hazardous materials workers and emergency responders in classrooms and with hands-on, realistic training aids representing actual field conditions. The HAMMER Training Center will provide a cost-effective, high-quality way to meet the Hanford Site training needs. The training center creates a partnership among DOE; government contractors; labor; local, state, and tribal governments; and selected institutions of higher education

Mollusc life and death assemblages on a tropical rocky shore as proxies for the taphonomic loss in a fossil counterpart

DEFF Research Database (Denmark)

Sørensen, Anne Mehlin; Surlyk, Finn

2013-01-01

a lower taxonomic agreement to the death assemblage than found in previous published studies. Rocky shore life and death assemblages thus appear to show lower taxonomic agreement compared to muddy or sandy shelf assemblages due to the mix after death with the sandy beach assemblage. A hypothetical fossil......Comparison of a modern rocky shore mollusc life assemblage from Thailand with the associated death assemblage, and interpretation of the fossilization potential of the latter, are used to investigate the fidelity in reconstruction of ancient analogues. The fauna from the death assemblage represents...... species from the rocky shore and the associated sandy pocket beaches, and only a few exotic species from other, completely different habitats are present. The environmental fidelity between the life and death assemblage is thus high, with the majority of species from the death assemblage representing...

Shore approach of Camarupim pipeline

Energy Technology Data Exchange (ETDEWEB)

Bernardi, Tiaraju P.; Oliveira Neto, Vasco A. de; Siqueira, Jakson [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

2009-07-01

Camarupim Field is located in the northern portion of Espirito Santo Basin and was discovered from the drilling of the well 1-ESS-164 in 2006. It is a gas field which start of the production is in mid of 2009. The production unit will be a FPSO (Floating Production, Storage and Offloading) and the gas will flow through a pipeline with diameter ranging from 12 inches and 24 inches with approximately 60 km long, from the FPSO Cidade de Sao Mateus to UTGC (Unit for Treatment of Gas Cacimbas-Linhares-ES). The FPSO will have processing capacity of 10MMm3/day of gas. Due to the approach of the pipeline in the continental portion, located in an environmental protection area and place of spawning of sea turtles, the connection between the stretch of sea and land pipeline running through a shore approach, known and proven technique of horizontal directional drilling about 950m in length. This paper will be shown the assumptions adopted, the technique employed, the challenges faced by the team and the lessons learned to build the directional hole. (author)

Research on Shore-Ship Photonic Link Performance for Two- Frequency-Band Signals

Science.gov (United States)

Zuo, Yanqin; Cong, Bo

2016-02-01

Ka and Ku bands links for shore-ship communications suffer limited bandwidth and high loss. In this paper, photonics-based links are proposed and modeled. The principle of phase modulation (PM) is elaborated and analyzed. It is showed that PM can effectively suppress high-order inter-modulation distortion (IMD), reduce the insert loss and improve the reliability of the system.

Some functional properties of composite material based on scrap tires

Science.gov (United States)

Plesuma, Renate; Malers, Laimonis

2013-09-01

The utilization of scrap tires still obtains a remarkable importance from the aspect of unloading the environment from non-degradable waste [1]. One of the most prospective ways for scrap tires reuse is a production of composite materials [2] This research must be considered as a continuation of previous investigations [3, 4]. It is devoted to the clarification of some functional properties, which are considered important for the view of practical applications, of the composite material. Some functional properties of the material were investigated, for instance, the compressive stress at different extent of deformation of sample (till 67% of initial thickness) (LVS EN 826) [5] and the resistance to UV radiation (modified method based on LVS EN 14836) [6]. Experiments were realized on the purposefully selected samples. The results were evaluated in the correlation with potential changes of Shore C hardness (Shore scale, ISO 7619-1, ISO 868) [7, 8]. The results showed noticeable resistance of the composite material against the mechanical influence and ultraviolet (UV) radiation. The correlation with the composition of the material, activity of binder, definite technological parameters, and the conditions supported during the production, were determined. It was estimated that selected properties and characteristics of the material are strongly dependent from the composition and technological parameters used in production of the composite material, and from the size of rubber crumb. Obtained results show possibility to attain desirable changes in the composite material properties by changing both the composition and technological parameters of examined material.

Off-site environmental monitoring report: Radiation monitoring around United States Nuclear Test areas, Calendar year 1986

International Nuclear Information System (INIS)

Patzer, R.G.; Fontana, C.A.; Grossman, R.F.; Black, S.C.; Dye, R.E.; Smith, D.D.; Thome', D.J.; Mullen, A.A.

1987-05-01

The principal activity at the NTS is testing of nuclear devices, though other related projects are also conducted. The principal activities of the Off-Site Radiological Safety Program are routine environmental monitoring for radioactive materials in various media and for radiation in areas which may be affected by nuclear tests; and protective actions in support of the nuclear testing program. These are conducted to document compliance with standards, to identify trends, and to provide information to the public. 28 refs., 37 figs., 30 tabs

The projected relative index of consequence equivalence of transport of radioactive materials

International Nuclear Information System (INIS)

Nandakumar, A.N.

1999-01-01

The need exists for defining a unit risk factor to enable analysis to make a proper decision when faced with many options relating to the transport of radioactive materials between sites. A method is discussed for deriving such a factor with reference to the collective dose receivable due to the transport of radioactive material incidental to the production of one GWe.a of nuclear power. This quantity would enable the analyst to determine the projected relative index of consequence equivalence (PRICE) for the transport of various types of radioactive materials. (author)

Disposal of radioactive waste material to sea

International Nuclear Information System (INIS)

Burton, W.R.

1985-01-01

Radioactive waste liquid of a low or intermediate activity level is mixed with a suitable particulate material and discharged under the sea from a pipeline. The particulate material is chosen so that it sorbs radio-nuclides from this waste, has a good retention for these nuclides when immersed in sea water, and has a particle size or density such that transfer of the particles back to the shore by naturally occurring phenomena is reduced. Radio nuclide concentration in the sea water at the end of the pipeline may also be reduced. The particulate material used may be preformed or co-precipitated in the waste. Suitable materials are oxides or hydroxides of iron or manganese or material obtained from the sea-bed. (author)

Near-shore wind power - protected seascapes, environmentalists' attitudes, and the technocratic planning perspective

NARCIS (Netherlands)

Wolsink, M.

2010-01-01

In contested wind farm developments, the dominant issue concerns scenic impact and the landscape at the proposed site. The number of large wind power schemes that have failed is growing. The case analysed here is a near-shore wind farm in the Dutch part of the Wadden Sea, in 2001 the largest wind

Radio frequency identification (RFID) tagging for material tracking and future asset management : research project capsule.

Science.gov (United States)

2016-07-01

Current Louisiana Department of Transportation and Development (DOTD) : practice allows multiple mixtures or materials to be submitted and subsequently : used during a highway construction project. Such materials include mechanically : stabilized ear...

Investigating Potential Strategies for Increasing Tourism Competiveness at the Black Sea Shore

Directory of Open Access Journals (Sweden)

Adina-Roxana Munteanu

2014-11-01

Full Text Available During 2009-2011 the tourism industry at the Black Sea shore experienced a significant downturn as a direct result of the global economic crisis and a shy growth in 2012-2013 period. In this context of difficult macroeconomic conditions and a hardly predictable number of tourists, the suppliers of tourism services need a constant revision of strategy in order to increase their competitiveness and adapt to external market conditions. The main objective of this study is to investigate the competitive strategies that hotels managers in Mamaia resort, Romania, could adopt considering customers` expectations and hospitality industry best practices. In order to achieve this, a best practice benchmarking analysis was performed considering several locations on the seaside in France, Italy, Spain and Turkey. Following this analysis, several strategies are drafted, such as: use of social media, creation of packaged deals, targeting the business segment and advertising by using the cultural and historical context of the location. Moreover, a short survey among social media users revealed some of the tourists` expectations regarding their holidays at the Romanian Black Sea shore, such as quality of accommodation facilities, personalized services and entertainment possibilities.

Management and Beneficial Reuse of Overburden Material - Linde Formerly Utilized Sites Remedial Action Program (FUSRAP) Remediation Project

International Nuclear Information System (INIS)

Boyle, J.D.; Schwippert, M.; Lorenz, W.D.

2009-01-01

This paper outlines three separate and distinct situations where the proper management of overburden material allows for the beneficial reuse of overburden material. Beneficial reuse of overburden material at the Linde Project was made possible by a simultaneous combination of physical conditions at the site in conjunction with collaborative planning and cooperation between U.S. Army Corps of Engineers - Buffalo District, New York State Department of Energy and Conservation, the Owner and Shaw Environmental and Infrastructure. Efforts by the project team focused on maintaining compliance with project plan requirements, communicating the plan to all parties, executing the plan safely and efficiently, and emphasizing fiscal responsibility to ensure maximum cost savings. (authors)

The variability and forcing of currents within a frontal region off the northeast coast of England

Science.gov (United States)

Gmitrowicz, E. M.; Brown, J.

1993-08-01

During the summer of 1988 a collaborative experiment between the Ministry of Agriculture, Fisheries and Food (MAFF), the Proudman Oceanographic Laboratory (POL) and University College North Wales (UCNW) was undertaken to study the dynamics of a near-shore frontal region off the northeast coast of England. The experiment is one of the most intensive studies of the current structure of a shelf sea front undertaken. Currents were measured using an ocean surface current RADAR (OSCR), ship-borne ADCP, Lagrangian drifters and moored current meters. The current meter moorings held conventional meters at mid-depth and near the bed and S4 electromagnetic current meters near the surface. The mean, low frequency (Continental Shelf Research, 1, 191-207) with some deviations due to nearshore effects.

Measuring Carbon Footprint of Flexible Pavement Construction Project in Indonesia

Directory of Open Access Journals (Sweden)

Utomo Dwi Hatmoko Jati

2018-01-01

Full Text Available Road infrastructure in Indonesia is mainly dominated by flexible pavement type. Its construction process, however, has raised concerns in terms of its environment impacts. This study aims to track and measure the carbon footprint of flexible pavement. The objectives are to map the construction process in relation to greenhouse gas (GHG emissions, to quantify them in terms of carbon dioxide equivalents (CO2e as generated by the process of production and transportation of raw materials, and the operation of plant off-site and on-site project. Data collection was done by having site observations and interviews with project stakeholders. The results show a total emissions of 70.888 tonnes CO2e, consisting of 34.248 tonnes CO2e (48.31% off-site activities and 36.640 tonnes CO2e (51.687% on-site activities. The two highest CO2e emissions were generated by the use of plant for asphalt concrete laying activities accounted 34.827 tonnes CO2e (49.130%, and material transportation accounted 24.921 (35.155%. These findings provide a new perspective of the carbon footprint in flexible pavement and suggest the urgent need for the use of more efficient and environmentally friendly plant in construction process as it shows the most significant contribution on the CO2e. This study provides valuable understanding on the environmental impact of typical flexible pavement projects in Indonesia, and further can be used for developing green road framework.

Measuring Carbon Footprint of Flexible Pavement Construction Project in Indonesia

Science.gov (United States)

Hatmoko, Jati Utomo Dwi; Hidayat, Arif; Setiawati, Apsari; Prasetyo, Stefanus Catur Adi

2018-02-01

Road infrastructure in Indonesia is mainly dominated by flexible pavement type. Its construction process, however, has raised concerns in terms of its environment impacts. This study aims to track and measure the carbon footprint of flexible pavement. The objectives are to map the construction process in relation to greenhouse gas (GHG) emissions, to quantify them in terms of carbon dioxide equivalents (CO2e) as generated by the process of production and transportation of raw materials, and the operation of plant off-site and on-site project. Data collection was done by having site observations and interviews with project stakeholders. The results show a total emissions of 70.888 tonnes CO2e, consisting of 34.248 tonnes CO2e (48.31%) off-site activities and 36.640 tonnes CO2e (51.687%) on-site activities. The two highest CO2e emissions were generated by the use of plant for asphalt concrete laying activities accounted 34.827 tonnes CO2e (49.130%), and material transportation accounted 24.921 (35.155%). These findings provide a new perspective of the carbon footprint in flexible pavement and suggest the urgent need for the use of more efficient and environmentally friendly plant in construction process as it shows the most significant contribution on the CO2e. This study provides valuable understanding on the environmental impact of typical flexible pavement projects in Indonesia, and further can be used for developing green road framework.

16 CFR 460.11 - Rounding off R-values.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Rounding off R-values. 460.11 Section 460.11... INSULATION § 460.11 Rounding off R-values. R-values shown in labels, fact sheets, ads, or other promotional materials must be rounded to the nearest tenth. However, R-values of 10 or more may be rounded to the...

Goodwyn project under way off NW Australia

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that the $2 billion (Australian) Goodwyn field development project on Australia's Northwest Shelf is under way with installation of a 17,500 metric ton steel platform jacket. Northwest Shelf project operator Woodside Petroleum Pty. Ltd. and partners are continuing with an extensive exploration program in the Northwest Shelf area. The group expects to begin soon a wide ranging 3-D seismic survey over the WA-28-P license area and the Northwest Shelf production permits. The goal is to identify new and appraise existing oil and gas prospects in the region for an exploratory drilling campaign to begin in first half 1993. Finding more gas reserves would bode well for extending existing LNG contracts with Japan or competing for new markets in Japan, South Korea, and Taiwan

EuroCirCol kick-off event

CERN Multimedia

Hardre, Julie

2015-01-01

The EuroCirCol (http://cern.ch/eurocircol) kick-off event at CERN on June 2-4 brought together 62 participants to constitute governance bodies, commit to the project plan and align the organisation, structures and processes of 16 institutions from 10 countries. The goal of the project is to conceive a post-LHC research infrastructure around a 100 km circular energy-frontier hadron collider capable of reaching 100 TeV collisions. The project officially started on June 1 and will run for four years. The total estimated budget of 11.2 million Euros includes a 2.99 million Euro contribution from the Horizon 2020 programme on developing new world-class research infrastructures (http://cordis.europa.eu/project/rcn/194962_en.html).

Development of off-gas filters for reprocessing plants. Development and construction of an off-gas filter system for large reprocessing plants. Off-gas section of the resolver test stand of the IHCh

International Nuclear Information System (INIS)

Furrer, J.; Kaempffer, R.; Wilhelm, J.G.; Pfauter, C.; Jannakos, K.; Apenberg, W.; Lange, W.; Mendel, W.; Potgeter, G.; Zabel, G.

1976-01-01

The test of the highly impregnated iodine sorption material AC 6,120 was continued in the laboratory under simulated conditions of a 1,500 t/a uranium reprocessing plant. The influence of NO in nitrogen as the carrier gas on the removal efficiency of the sorption material has been especially examined. Several experiments on the removal efficiency of iodine sorption by the material AC 6,120 were carried out in the original off-gas of the French processing plant SAP Marcoule while the filter system was installed on the one side directly behind the dissolver and on the other side behind the iodine desorption columm. The first iodine filter developed at LAF II was installed in the off-gas line of the dissolver in the Karlsruhe reprocessing plant. The filter system for the dissolver off-gas handling test rig of the IHCh was specified and ordered with an engineering firm. The conception of the prototype off-gas filter system was selected and a lock and transport system allowing to replace filters was designed and subjected for testing. Five alternative solutions were set up in order to find the appropriate filter concept. The method of selection based on the evaluation of performance criteria. According to the selected solution a filter drum was designed and constructed. The lock of the filter system has been designed and realized. Preliminary tests have been made. (orig.) [de

Cadmium in the shore crab Carcinus maenas along the Norwegian coast: geographical and seasonal variation and correlation to physiological parameters.

Science.gov (United States)

Knutsen, Heidi; Wiech, Martin; Duinker, Arne; Maage, Amund

2018-03-27

Previously, high concentrations of cadmium have been found in the hepatopancreas of the edible or brown crab (Cancer pagurus) sampled from positions north of about 67° N, compared to regions further south along the Norwegian coast, with no clear understanding why. In order to study a similar organism in the same ecosystem, the present study analyzed 210 shore crabs (Carcinus maenas) from four different locations along the Norwegian coast, two in the North and two in the South. The physiological variables size, sex, molting stage, hepatosomatic index, carapace color, and gonad maturation were registered, in attempt to explain the high inter-individual variation in cadmium levels in hepatopancreas. In contrast to the brown crabs, the shore crabs showed no clear geographical differences in cadmium concentrations. This indicates physiological differences between the two crab species. No clear and consistent correlations were found between cadmium levels and physiological parameters, except for sex, where cadmium concentration in hepatopancreas was twice as high in males compared to females. The cadmium levels also varied with season, with approximately 40 and 60% lower cadmium concentration in April than August for male and female shore crabs, respectively. None of the analyzed cadmium concentrations in muscle meat from claws exceeded EUs food safety limit, and low cadmium levels in soup prepared from shore crabs clearly indicated that this dish is not problematic regarding food safety.

Marine protected areas in Costa Rica: How do artisanal fishers respond?

Science.gov (United States)

Madrigal-Ballestero, Róger; Albers, Heidi J; Capitán, Tabaré; Salas, Ariana

2017-11-01

Costa Rica is considering expanding their marine protected areas (MPAs) to conserve marine resources. Due to the importance of households' responses to an MPA in defining the MPA's ecological and economic outcomes, this paper uses an economic decision framework to interpret data from near-MPA household surveys to inform this policy discussion. The model and data suggest that the impact of expanding MPAs relies on levels of enforcement and on-shore wages. If larger near-shore MPAs can produce high wages through increased tourism, MPA expansions could provide ecological benefits with low burdens to communities. Due to distance costs and gear investments, however, MPAs farther off-shore may place high burdens on off-shore fishers.

Devonian lacustrine shore zone architecture imaged with ground penetrating radar

DEFF Research Database (Denmark)

Andrews, Steven D.; Moreau, Julien; Archer, Stuart

. The shore zone sandstones overlie playa facies which contain abundant desiccation horizons, reflecting the most arid phase in the climatically controlled lacustrine cycle. As climatic conditions ameliorated the rejuvenation of fluvial systems resulted in the transport of sand out into the basin. Initial...... deposition was limited to intermittent events where sediment was laid down on a water saturated substrate. Some of these may have occurr­­­ed subaqueously as small scale turbidity flows. High resolution fluctuations in lake level resulted in periodic short lived reworking events along the lake margin which...

Open Skies and monitoring a fissile materials cut-off treaty

International Nuclear Information System (INIS)

Allentuck, J.; Lemley, J.R.

1995-01-01

The Treaty on Open Skies (Open Skies) is intended among other things to provide, in the words of its preamble, means ''to facilitate the monitoring of compliance with existing or future arms control agreements.'' Open Skies permits overflights of the territory of member states by aircraft equipped with an array of sensors of various types. Their types and capabilities are treaty-limited. To find useful application in monitoring a cut-off treaty Open Skies would need to be amended. The number of signatories would need to be expanded so as to provide greater geographical coverage, and restrictions on sensor-array capabilities would need to be relaxed. To facilitate the detection of impending violations of a cut-off convention by Open Skies overflights, the data base provided by parties to the former should include among other things an enumeration of existing and former fuel cycle and research facilities including those converted to other uses, their precise geographic location, and a site plan

Technology spin-offs from the magnetic fusion energy program

International Nuclear Information System (INIS)

1982-05-01

A description is given of 138 possible spin-offs from the magnetic fusion program. The spin-offs cover the following areas: (1) superconducting magnets, (2) materials technology, (3) vacuum systems, (4) high frequency and high power rf, (5) electronics, (6) plasma diagnostics, (7) computers, and (8) particle beams

Stochastic simulation of off-shore oil terminal systems

International Nuclear Information System (INIS)

Frankel, E.G.; Oberle, J.

1991-01-01

To cope with the problem of uncertainty and conditionality in the planning, design, and operation of offshore oil transshipment terminal systems, a conditional stochastic simulation approach is presented. Examples are shown, using SLAM II, a computer simulation language based on GERT, a conditional stochastic network analysis methodology in which use of resources such as time and money are expressed by the moment generating function of the statistics of the resource requirements. Similarly each activity has an associated conditional probability of being performed and/or of requiring some of the resources. The terminal system is realistically represented by modelling the statistics of arrivals, loading and unloading times, uncertainties in costs and availabilities, etc

Modeling the self-assembly of ordered nanoporous materials

Energy Technology Data Exchange (ETDEWEB)

Monson, Peter [Univ. of Massachusetts, Amherst, MA (United States); Auerbach, Scott [Univ. of Massachusetts, Amherst, MA (United States)

2017-11-13

This report describes progress on a collaborative project on the multiscale modeling of the assembly processes in the synthesis of nanoporous materials. Such materials are of enormous importance in modern technology with application in the chemical process industries, biomedicine and biotechnology as well as microelectronics. The project focuses on two important classes of materials: i) microporous crystalline materials, such as zeolites, and ii) ordered mesoporous materials. In the first case the pores are part of the crystalline structure, while in the second the structures are amorphous on the atomistic length scale but where surfactant templating gives rise to order on the length scale of 2 - 20 nm. We have developed a modeling framework that encompasses both these kinds of materials. Our models focus on the assembly of corner sharing silica tetrahedra in the presence of structure directing agents. We emphasize a balance between sufficient realism in the models and computational tractibility given the complex many-body phenomena. We use both on-lattice and off-lattice models and the primary computational tools are Monte Carlo simulations with sampling techniques and ensembles appropriate to specific situations. Our modeling approach is the first to capture silica polymerization, nanopore crystallization, and mesopore formation through computer-simulated self assembly.

A comparative analysis of the environmental impacts of a Pelamis Wave Energy device with existing off shore developments and installations.

OpenAIRE

Quinn, Eoghan

2011-01-01

Scotland is currently at the forefront of development and expansion of wave energy, especially with recent renewable energy targets. Research and development has increased greatly off the Scottish coastline. Various adjectives can be used to describe wave energy’s creative potential in helping to achieve Scotland’s energy goals. Put simply however the production of wave energy appears to have all the ingredients for success; it is benign, the visual impacts minimal and its energy is reliable,...

Photographic simulation of off-axis blurring due to chromatic aberration in spectacle lenses.

Science.gov (United States)

Doroslovački, Pavle; Guyton, David L

2015-02-01

Spectacle lens materials of high refractive index (nd) tend to have high chromatic dispersion (low Abbé number [V]), which may contribute to visual blurring with oblique viewing. A patient who noted off-axis blurring with new high-refractive-index spectacle lenses prompted us to do a photographic simulation of the off-axis aberrations in 3 readily available spectacle lens materials, CR-39 (nd = 1.50), polyurethane (nd = 1.60), and polycarbonate (nd = 1.59). Both chromatic and monochromatic aberrations were found to cause off-axis image degradation. Chromatic aberration was more prominent in the higher-index materials (especially polycarbonate), whereas the lower-index CR-39 had more astigmatism of oblique incidence. It is important to consider off-axis aberrations when a patient complains of otherwise unexplained blurred vision with a new pair of spectacle lenses, especially given the increasing promotion of high-refractive-index materials with high chromatic dispersion. Copyright © 2015 American Association for Pediatric Ophthalmology and Strabismus. Published by Elsevier Inc. All rights reserved.

Flat-plate solar array project. Volume 2: Silicon material

Science.gov (United States)

Lutwack, R.

1986-10-01

The goal of the Silicon Material Task, a part of the Flat Plate Solar Array (FSA) Project, was to develop and demonstate the technology for the low cost production of silicon of suitable purity to be used as the basic material for the manufacture of terrestrial photovoltaic solar cells. Summarized are 11 different processes for the production of silicon that were investigated and developed to varying extent by industrial, university, and Government researchers. The silane production section of the Union Carbide Corp. (UCC) silane process was developed completely in this program. Coupled with Siemens-type chemical vapor deposition reactors, the process was carried through the pilot stage. The overall UCC process involves the conversion of metallurgical-grade silicon to silane followed by decomposition of the silane to purified silicon. The other process developments are described to varying extents. Studies are reported on the effects of impurities in silicon on both silicon-material properties and on solar cell performance. These studies on the effects of impurities yielded extensive information and models for relating specific elemental concentrations to levels of deleterious effects.

Flat-plate solar array project. Volume 2: Silicon material

Science.gov (United States)

Lutwack, R.

1986-01-01

The goal of the Silicon Material Task, a part of the Flat Plate Solar Array (FSA) Project, was to develop and demonstate the technology for the low cost production of silicon of suitable purity to be used as the basic material for the manufacture of terrestrial photovoltaic solar cells. Summarized are 11 different processes for the production of silicon that were investigated and developed to varying extent by industrial, university, and Government researchers. The silane production section of the Union Carbide Corp. (UCC) silane process was developed completely in this program. Coupled with Siemens-type chemical vapor deposition reactors, the process was carried through the pilot stage. The overall UCC process involves the conversion of metallurgical-grade silicon to silane followed by decomposition of the silane to purified silicon. The other process developments are described to varying extents. Studies are reported on the effects of impurities in silicon on both silicon-material properties and on solar cell performance. These studies on the effects of impurities yielded extensive information and models for relating specific elemental concentrations to levels of deleterious effects.

Evolution of Safeguards over Time: Past, Present, and Projected Facilities, Material, and Budget

Energy Technology Data Exchange (ETDEWEB)

Kollar, Lenka; Mathews, Caroline E.

2009-07-01

This study examines the past trends and evolution of safeguards over time and projects growth through 2030. The report documents the amount of nuclear material and facilities under safeguards from 1970 until present, along with the corresponding budget. Estimates for the future amount of facilities and material under safeguards are made according to non-nuclear-weapons states’ (NNWS) plans to build more nuclear capacity and sustain current nuclear infrastructure. Since nuclear energy is seen as a clean and economic option for base load electric power, many countries are seeking to either expand their current nuclear infrastructure, or introduce nuclear power. In order to feed new nuclear power plants and sustain existing ones, more nuclear facilities will need to be built, and thus more nuclear material will be introduced into the safeguards system. The projections in this study conclude that a zero real growth scenario for the IAEA safeguards budget will result in large resource gaps in the near future.

Evolution of Safeguards over Time: Past, Present, and Projected Facilities, Material, and Budget

International Nuclear Information System (INIS)

Kollar, Lenka; Mathews, Caroline E.

2009-01-01

This study examines the past trends and evolution of safeguards over time and projects growth through 2030. The report documents the amount of nuclear material and facilities under safeguards from 1970 until present, along with the corresponding budget. Estimates for the future amount of facilities and material under safeguards are made according to non-nuclear-weapons states (NNWS) plans to build more nuclear capacity and sustain current nuclear infrastructure. Since nuclear energy is seen as a clean and economic option for base load electric power, many countries are seeking to either expand their current nuclear infrastructure, or introduce nuclear power. In order to feed new nuclear power plants and sustain existing ones, more nuclear facilities will need to be built, and thus more nuclear material will be introduced into the safeguards system. The projections in this study conclude that a zero real growth scenario for the IAEA safeguards budget will result in large resource gaps in the near future.

Devonian lacustrine shore zone architecture: giving perspective to cliff exposures with ground penetrating radar

DEFF Research Database (Denmark)

Andrews, Steven D.; Moreau, Julien; Archer, Stuart

. Some of these may have occurr­­­ed subaqueously as small scale turbidity flows. High resolution fluctuations in lake level resulted in periodic short lived reworking events along the lake margin which produced amalgamated sands which formed low relief bars. Shore zone reworking is likely to have...

On-site gamma dose rates at the Andreeva Bay shore technical base, northwest Russia

NARCIS (Netherlands)

Reistad, O.; Dowdall, M.; Standring, W. J. F.; Selnaes, O. G.; Hustveit, S.; Steinhusen, F.; Sorlie, A.

The spent nuclear fuel (SNF) and radioactive waste (RAW) storage facility at Andreeva Bay shore technical base (STB) is one of the largest and most hazardous nuclear legacy sites in northwest Russia. Originally commissioned in the 1960s the facility now stores large amounts of SNF and RAW associated

Principles and concepts in designing tropical-shore settlement in estuary ecosystem, case study: Weriagar District, Bintuni Bay

Science.gov (United States)

Firmansyah; Nidia Kusuma, Bintang; Prayuni, Ira; Fernando, Aldo

2017-12-01

Weriagar District is located in estuary area and is prone to land loss, due to river and coastal erosion. This paper will describe about tropical-shore settlement design and house design in estuary area. The results from analysis phase shows that it's necessary to design a house and settlement that can fulfil the needs of indigenous people, both functionally and aesthetically. Functionally, the house is designed to provide spaces for both private and public needs of the family. It can be used either as a family private space or as a public gathering space between family and their neighbours. Aesthetically, house’ architectural form is designed into that identifies the locality of Weriagar District. The houses’ design feature highlighted in using local material, rainwater harvesting system, high pitched roof feature as response to hot-humid climate, and elevated-floor feature as response to tidal condition in estuary area. The houses design also considered daily activity pattern and community culture, including appropriate structure, construction, and material availability. The expected result was that the settlement improvement and house design would meet suitable standards and needs of inhabitants in Weriagar District.

Shore displacement in northern Uppland during the last 6500 calender years

Energy Technology Data Exchange (ETDEWEB)

Hedenstroem, Anna; Risberg, Jan [Stockholm Univ. (Sweden). Dept. of Physical Geography and Quaternary Geology

2003-10-01

This report describes the shore displacement in northern Uppland, Sweden. Four lake basins were investigated regarding elevation and age of their isolation events. The methods applied were diatom stratigraphy and AMS radiocarbon datings of terrestrial macrofossils, together with analysis of water, organic carbon and calcium carbonate in the sediment. Lake Barsjoe (22.5 masl -meters above sea level) was isolated 3,200 cal yrs BP, Lake Landholmssjoen (16.0 masl) 2,200 cal yrs BP, Lake Soedra Aassjoen (10.8 masl) 1,400 cal yrs BP and Lake Eckarfjaerden (5.5 masl) 850 cal yrs BP. Combined with six basins located at approximately the 70 m Litorina Limit isobase it was concluded that the shore displacement during the last 6500 calendar years was regressive in nature. The isolation processes, however, seem to have been prolonged at 4750-4150 cal yrs BP, 2500-2200 cal yrs Bp and 1100-850 cal yrs BP. These events can be correlated with eustatic sea level rises recorded in the Stockholm area. The diatom succession during the formation of the oligotrophic hardwater Lakes Barsjoe, Landholmssjoen and Eckarfjaerden differs from the brownwater Lake Soedra Aasjoen. Short pre-isolation sequences indicate that erosion has affected the four basins investigated. Accumulation rates in the lake basins vary between 0.5 mm/year in Lake Barsjoe and 1.5 mm/year in Lake Soedra Aasjoen.

Shore displacement in northern Uppland during the last 6500 calender years

International Nuclear Information System (INIS)

Hedenstroem, Anna; Risberg, Jan

2003-10-01

This report describes the shore displacement in northern Uppland, Sweden. Four lake basins were investigated regarding elevation and age of their isolation events. The methods applied were diatom stratigraphy and AMS radiocarbon datings of terrestrial macrofossils, together with analysis of water, organic carbon and calcium carbonate in the sediment. Lake Barsjoe (22.5 masl -meters above sea level) was isolated 3,200 cal yrs BP, Lake Landholmssjoen (16.0 masl) 2,200 cal yrs BP, Lake Soedra Aassjoen (10.8 masl) 1,400 cal yrs BP and Lake Eckarfjaerden (5.5 masl) 850 cal yrs BP. Combined with six basins located at approximately the 70 m Litorina Limit isobase it was concluded that the shore displacement during the last 6500 calendar years was regressive in nature. The isolation processes, however, seem to have been prolonged at 4750-4150 cal yrs BP, 2500-2200 cal yrs Bp and 1100-850 cal yrs BP. These events can be correlated with eustatic sea level rises recorded in the Stockholm area. The diatom succession during the formation of the oligotrophic hardwater Lakes Barsjoe, Landholmssjoen and Eckarfjaerden differs from the brownwater Lake Soedra Aasjoen. Short pre-isolation sequences indicate that erosion has affected the four basins investigated. Accumulation rates in the lake basins vary between 0.5 mm/year in Lake Barsjoe and 1.5 mm/year in Lake Soedra Aasjoen

Verification of a Fissile Material Cut-off Treaty (FMCT): The Potential Role of the IAEA

International Nuclear Information System (INIS)

Chung, Jin Ho

2016-01-01

The objective of a future verification of a FMCT(Fissile Material Cut-off Treaty) is to deter and detect non-compliance with treaty obligations in a timely and non-discriminatory manner with regard to banning the production of fissile material for nuclear weapons or other nuclear devices. Since the International Atomic Energy Agency (IAEA) has already established the IAEA safeguards as a verification system mainly for Non -Nuclear Weapon States (NNWSs), it is expected that the IAEA's experience and expertise in this field will make a significant contribution to setting up a future treaty's verification regime. This paper is designed to explore the potential role of the IAEA in verifying the future treaty by analyzing verification abilities of the Agency in terms of treaty verification and expected challenges. Furthermore, the concept of multilateral verification that could be facilitated by the IAEA will be examined as a measure of providing a credible assurance of compliance with a future treaty. In this circumstance, it is necessary for the IAEA to be prepared for playing a leading role in FMCT verifications as a form of multilateral verification by taking advantage of its existing verification concepts, methods, and tools. Also, several challenges that the Agency faces today need to be overcome, including dealing with sensitive and proliferative information, attribution of fissile materials, lack of verification experience in military fuel cycle facilities, and different attitude and culture towards verification between NWSs and NNWSs

Verification of a Fissile Material Cut-off Treaty (FMCT): The Potential Role of the IAEA

Energy Technology Data Exchange (ETDEWEB)

Chung, Jin Ho [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

2016-05-15

The objective of a future verification of a FMCT(Fissile Material Cut-off Treaty) is to deter and detect non-compliance with treaty obligations in a timely and non-discriminatory manner with regard to banning the production of fissile material for nuclear weapons or other nuclear devices. Since the International Atomic Energy Agency (IAEA) has already established the IAEA safeguards as a verification system mainly for Non -Nuclear Weapon States (NNWSs), it is expected that the IAEA's experience and expertise in this field will make a significant contribution to setting up a future treaty's verification regime. This paper is designed to explore the potential role of the IAEA in verifying the future treaty by analyzing verification abilities of the Agency in terms of treaty verification and expected challenges. Furthermore, the concept of multilateral verification that could be facilitated by the IAEA will be examined as a measure of providing a credible assurance of compliance with a future treaty. In this circumstance, it is necessary for the IAEA to be prepared for playing a leading role in FMCT verifications as a form of multilateral verification by taking advantage of its existing verification concepts, methods, and tools. Also, several challenges that the Agency faces today need to be overcome, including dealing with sensitive and proliferative information, attribution of fissile materials, lack of verification experience in military fuel cycle facilities, and different attitude and culture towards verification between NWSs and NNWSs.

A computer based approach for Material, Manpower and Equipment managementin the Construction Projects

Science.gov (United States)

Sasidhar, Jaladanki; Muthu, D.; Venkatasubramanian, C.; Ramakrishnan, K.

2017-07-01

The success of any construction project will depend on efficient management of resources in a perfect manner to complete the project with a reasonable budget and time and the quality cannot be compromised. The efficient and timely procurement of material, deployment of adequate labor at correct time and mobilization of machinery lacking in time, all of them causes delay, lack of quality and finally affect the project cost. It is known factor that Project cost can be controlled by taking corrective actions on mobilization of resources at a right time. This research focuses on integration of management systems with the computer to generate the model which uses OOM data structure which decides to include automatic commodity code generation, automatic takeoff execution, intelligent purchase order generation, and components of design and schedule integration to overcome the problems of stock out. To overcome the problem in equipment management system inventory management module is suggested and the data set of equipment registration number, equipment number, description, date of purchase, manufacturer, equipment price, market value, life of equipment, production data of the equipment which includes equipment number, date, name of the job, hourly rate, insurance, depreciation cost of the equipment, taxes, storage cost, interest, oil, grease, and fuel consumption, etc. is analyzed and the decision support systems to overcome the problem arising out improper management is generated. The problem on labor is managed using scheduling, Strategic management of human resources. From the generated support systems tool, the resources are mobilized at a right time and help the project manager to finish project in time and thereby save the abnormal project cost and also provides the percentage that can be improved and also research focuses on determining the percentage of delays that are caused by lack of management of materials, manpower and machinery in different types of projects

Regional marine climate scenarios in the NE Atlantic sector close to the Spanish shores

Directory of Open Access Journals (Sweden)

Damià Gomis

2016-09-01

Full Text Available We present an overview of the changes expected during the 21st century in key marine parameters (sea surface temperature, sea surface salinity, sea level and waves in the sector of the NE Atlantic Ocean close to the Spanish shores. Under the A1B scenario, open-sea surface temperatures would increase by 1°C to 1.5°C by 2050 as a consequence of global ocean warming. Near the continental margin, however, the global temperature rise would be counteracted by an enhancement of the seasonal upwelling. Sea surface salinity is likely to decrease in the future, mainly due to the advection of high-latitude fresher waters from ice melting. Mean sea level rise has been quantified as 15-20 cm by 2050, but two contributions not accounted for by our models must be added: the mass redistribution derived from changes in the large-scale circulation (which in the NE Atlantic may be as large as 15 cm in 2050 or 35 cm by 2100 and the increase in the ocean mass content due to the melting of continental ice (for which estimates are still uncertain. The meteorological tide shows very small changes, and therefore extreme sea levels would be higher in the 21st century, but mostly due to the increase in mean sea level, not to an increase in the storminess. The wave projections point towards slightly smaller significant wave heights, but the changes projected are of the same order as the natural variability.

Controlling Beryllium Contaminated Material And Equipment For The Building 9201-5 Legacy Material Disposition Project

International Nuclear Information System (INIS)

Reynolds, T.D.; Easterling, S.D.

2010-01-01

This position paper addresses the management of beryllium contamination on legacy waste. The goal of the beryllium management program is to protect human health and the environment by preventing the release of beryllium through controlling surface contamination. Studies have shown by controlling beryllium surface contamination, potential airborne contamination is reduced or eliminated. Although there are areas in Building 9201-5 that are contaminated with radioactive materials and mercury, only beryllium contamination is addressed in this management plan. The overall goal of this initiative is the compliant packaging and disposal of beryllium waste from the 9201-5 Legacy Material Removal (LMR) Project to ensure that beryllium surface contamination and any potential airborne release of beryllium is controlled to levels as low as practicable in accordance with 10 CFR 850.25.

Program Evaluation - Automotive Lightweighting Materials Program Research and Development Projects Assessment of Benefits - Case Studies No. 2

Energy Technology Data Exchange (ETDEWEB)

Das, S.

2003-01-23

This report is the second of a series of studies to evaluate research and development (R&D) projects funded by the Automotive Lightweighting Materials (ALM) Program of the Office of Advanced Automotive Technologies (OAAT) of the U.S. Department of Energy (DOE). The objectives of the program evaluation are to assess short-run outputs and long-run outcomes that may be attributable to the ALM R&D projects. The ALM program focuses on the development and validation of advanced technologies that significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. Funded projects range from fundamental materials science research to applied research in production environments. Collaborators on these projects include national laboratories, universities, and private sector firms, such as leading automobile manufacturers and their suppliers. Three ALM R&D projects were chosen for this evaluation: Design and Product Optimization for Cast Light Metals, Durability of Lightweight Composite Structures, and Rapid Tooling for Functional Prototyping of Metal Mold Processes. These projects were chosen because they have already been completed. The first project resulted in development of a comprehensive cast light metal property database, an automotive application design guide, computerized predictive models, process monitoring sensors, and quality assurance methods. The second project, the durability of lightweight composite structures, produced durability-based design criteria documents, predictive models for creep deformation, and minimum test requirements and suggested test methods for establishing durability properties and characteristics of random glass-fiber composites for automotive structural composites. The durability project supported Focal Project II, a validation activity that demonstrates ALM program goals and reduces the lead time for bringing new technology into the marketplace. Focal

An overview of the fuels and materials testing programme at the OECD Halden Reactor Project

Energy Technology Data Exchange (ETDEWEB)

Wiesenack, W [Institutt for Energiteknikk, Halden (Norway). OECD Halden Reaktor Projekt

1997-08-01

The fuels and materials testing programme of the OECD Halden Reactor Project is aimed at investigations of fuel and cladding properties at high burnup, water chemistry effects and in-core materials ageing problems. For the execution of this programme, different types of irradiation rigs and experimental facilities providing typical power reactors conditions are available. Data are obtained from in-core sensors developed at the Halden Project; these are shortly described. An overview of the current test programme and the scope of the following years are briefly presented. (author). 5 refs, 3 figs.

Research and Development for Off-Road Fuel Cell Applications U.S. Department of Energy Grant DE-FG36-04GO14303 - Final Report

Energy Technology Data Exchange (ETDEWEB)

Hicks, Michael [H2PowerTech (formerly known as IdaTech); Erickson, Paul [Univeristy of California at Davis; Lawrence, Richard [Retired (formerly employed by IdaTech); Tejaswi, Arun [Univeristy of California at Davis; Brum, Magdalena [Univeristy of California at Davis

2013-04-30

Off-road concerns are related to the effects of shock and vibration and air quality on fuel cell power requirements. Mechanical stresses on differing material makeup and mass distribution within the system may render some components susceptible to impulse trauma while others may show adverse effects from harmonic disturbances or broad band mechanical agitation. One of the recognized challenges in fuel cell systems air purification is in providing a highly efficient particulate and chemical filter with minimal pressure drop. PEM integrators do not want additional parasitic loads added to the system as compensation for a highly efficient yet highly restrictive filter. Additionally, there is challenge in integrating multiple functions into a single air intake module tasked with effectively filtering high dust loads, diesel soot, pesticides, ammonias, and other anticipated off-road contaminants. This project has investigated both off-road associated issues cumulating in the prototype build and testing of two light duty off-road vehicles with integrated fuel cell power plant systems.

Technologic spin-off from CNEA's activities

International Nuclear Information System (INIS)

Belinco, Cesar G.

2001-01-01

An analysis is made of the spin-off of technology from the nuclear activities in Argentina. Several examples are mentioned in fields such as material sciences, non-destructive testing, forensic research, space activities, instrumentation as well as in environmental studies

Cost-Efficient and sustainable deployment of renewable energy sources towards the 20% target by 2020, and beyond. D3.3. Off Shore wind energy - Case study of cooperation mechanisms design

Energy Technology Data Exchange (ETDEWEB)

Klinge Jacobsen, H.; Pade Hansen, L.-L. [Technical Univ. of Denmark. DTU Management Engineering, Roskilde (Denmark); Jansen, J. [ECN, Petten (Netherlands)

2012-10-15

Denmark is projected to have by 2020 a large excess potential for offshore wind capacity in the North Sea at shallow and near to the coast locations. The Netherlands on the other hand has low and expensive RES potentials for its 2020 RES target obligations. Therefore offshore wind potentials in Denmark constitute a possible cost reduction for the Netherlands in meeting its 2020 RES target. This case study examines a large amount of 2 GW offshore wind capacity in the Danish North Sea area. Cooperation unfolds in a joint project type with state to state negotiation and settlement. Different timing and implementation options are described with the possibility to implement a series of 200 MW joint projects with negotiation for each separate phase. The case study is focusing on the area around Horns Rev, where wind conditions are good, the distance to shore is 20-30 km and water depth is around 25 m. With these conditions the cost level will be around 12 c Euro/kWh and that is at least a 3 c Euro/kWh cost advantage to the expansion with offshore wind in the Netherlands. Joint project cooperation is a simple form of cooperation that does not involve a restructuring of national support schemes and legislator changes that can take a long time to implement and affect a lot of entities in the host country. Projects are negotiated between the host and the user country, with the major task to settle a transfer price for the credits transferred in 2020. The design of cooperation assigns the entire project risk to the host country as the host is the party that enters into the contract with the investors in renewable energy capacity. This case study identifies the main barriers for the joint project cooperation and concludes that the main barriers to cooperation between Denmark and the Netherlands is the missing detailed knowledge on the penalty for non-compliance with the 2020 targets, and the lack of post 2020 targets in the EU policy. The missing knowledge on the penalty may

76 FR 13445 - North Shore Railroad Company-Operation Exemption-SEDA-COG Joint Rail Authority

Science.gov (United States)

2011-03-11

... Railroad Company-Operation Exemption-SEDA-COG Joint Rail Authority North Shore Railroad Company (NSRR), a... milepost 2.0 in Berwick, Columbia County, Pa. The line is leased by SEDA-COG Joint Rail Authority (SEDA- COG). NSRR states that the line it proposes to operate is an extension of its existing line of...

Report on achievements in fiscal 1975 in Sunshine Project. Feasibility study on a volcanic electric power generation system; 1975 nendo kazan hatsuden hoshiki ni kansuru feasibility study seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1976-03-01

The survey and study activities in the second year for the feasibility study (FS) on a volcanic electric power generation system consist of the following three parts: Part I, the case study on Satsuma Iojima Island, Part II, case study on Toyohane Mine, and Part III, FS on remote measurement of volcanic fume. The Part I, which has been performed subsequently from the previous fiscal year, has carried out the following surveys at different sites: meteorological, hydrological and underground water surveys, natural earthquake survey, fume and hot spring surveys (on-shore and off-shore), heat dissipation survey, tide level survey, underground structure survey (electric exploration), natural environment (vegetation) survey, thermal image survey, and social environment survey. The part II has begun surveys starting this fiscal year, because a considerable number of high temperature portions are already known to exist in the gallery, where there is a possibility of dry and hot rocks to exist without relationship with the present volcanic activities. This fiscal year has carried out mainly putting into order and analyzing the materials having been obtained in association with mine developments. The part III has been performed succeeding the 'FS on technologies to measure volcanic fume energy' done by the Japan Mining Industry Association. Some experiments were also executed at the Aso volcano. (NEDO)

Report on achievements in fiscal 1975 in Sunshine Project. Feasibility study on a volcanic electric power generation system; 1975 nendo kazan hatsuden hoshiki ni kansuru feasibility study seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1976-03-01

The survey and study activities in the second year for the feasibility study (FS) on a volcanic electric power generation system consist of the following three parts: Part I, the case study on Satsuma Iojima Island, Part II, case study on Toyohane Mine, and Part III, FS on remote measurement of volcanic fume. The Part I, which has been performed subsequently from the previous fiscal year, has carried out the following surveys at different sites: meteorological, hydrological and underground water surveys, natural earthquake survey, fume and hot spring surveys (on-shore and off-shore), heat dissipation survey, tide level survey, underground structure survey (electric exploration), natural environment (vegetation) survey, thermal image survey, and social environment survey. The part II has begun surveys starting this fiscal year, because a considerable number of high temperature portions are already known to exist in the gallery, where there is a possibility of dry and hot rocks to exist without relationship with the present volcanic activities. This fiscal year has carried out mainly putting into order and analyzing the materials having been obtained in association with mine developments. The part III has been performed succeeding the 'FS on technologies to measure volcanic fume energy' done by the Japan Mining Industry Association. Some experiments were also executed at the Aso volcano. (NEDO)

RPV in-situ segmentation combined with off-site treatment for volume reduction and recycling - Proven In-Situ Segmentation Combined with Off-Site Treatment for Volume Reduction and Recycling. RPV case study

International Nuclear Information System (INIS)

Larsson, Arne; Lidar, Per; Segerud, Per; Hedin, Gunnar

2014-01-01

Decommissioning of nuclear power plants generates large volumes of radioactive or potentially radioactive waste. The proper management of the large components and the dismantling waste are key success factors in a decommissioning project. A large component of major interest is, due to its size and its span in radioactivity content, the RVP, which can be disposed as is or be segmented, treated, partially free released for recycling and conditioned for disposal in licensed packages. To a certain extent the decommissioning program have to be led by the waste management process. The costs for the plant decommissioning can be reduced by the usage of off-site waste treatment facilities as the time needed for performing the decommissioning project will be reduced as well as the waste volumes for disposal. Long execution times and delays due to problems with on-site waste management processes are major cost drivers for decommissioning projects. This involves also the RPV. In Sweden, the extension of the geological repository SFR plans for a potential disposal of whole RPVs. Disposal of whole RPVs is currently the main alternative but other options are considered. The target is to avoid extensive on-site waste management of RPVs to reduce the risk for delays. This paper describes in-situ RPV segmentation followed by off-site treatment aiming for free release for recycling of a substantial amount of the material, and volume efficient conditioning of the remaining parts. Real data from existing LWR RPVs was used for this study. Proven segmentation methods are intended to be used for the in situ segmentation followed by proven methods for packaging, transportation, treatment, recycling and conditioning for disposal. The expected volume reduction for disposal can be about 90% compared to whole RPV disposal. In this respect the in-situ segmentation of the RVPs to large pieces followed by off-site treatment is an interesting alternative that fits very well with the objective

Evaluating commercial marine emissions and their role in air quality policy using observations and the CMAQ model

Science.gov (United States)

Ring, Allison M.; Canty, Timothy P.; Anderson, Daniel C.; Vinciguerra, Timothy P.; He, Hao; Goldberg, Daniel L.; Ehrman, Sheryl H.; Dickerson, Russell R.; Salawitch, Ross J.

2018-01-01

We investigate the representation of emissions from the largest (Class 3) commercial marine vessels (c3 Marine) within the Community Multiscale Air Quality (CMAQ) model. In present emissions inventories developed by the United States Environmental Protection Agency (EPA), c3 Marine emissions are divided into off-shore and near-shore files. Off-shore c3 Marine emissions are vertically distributed within the atmospheric column, reflecting stack-height and plume rise. Near-shore c3 Marine emissions, located close to the US shoreline, are erroneously assumed to occur only at the surface. We adjust the near-shore c3 Marine emissions inventory by vertically distributing these emissions to be consistent with the off-shore c3 Marine inventory. Additionally, we remove near-shore c3 Marine emissions that overlap with off-shore c3 Marine emissions within the EPA files. The CMAQ model generally overestimates surface ozone (O3) compared to Air Quality System (AQS) site observations, with the largest discrepancies occurring near coastal waterways. We compare modeled O3 from two CMAQ simulations for June, July, and August (JJA) 2011 to surface O3 observations from AQS sites to examine the efficacy of the c3 Marine emissions improvements. Model results at AQS sites show average maximum 8-hr surface O3 decreases up to ∼6.5 ppb along the Chesapeake Bay, and increases ∼3-4 ppb around Long Island Sound, when the adjusted c3 Marine emissions are used. Along with the c3 Marine emissions adjustments, we reduce on-road mobile NOX emissions by 50%, motivated by work from Anderson et al. 2014, and reduce the lifetime of the alkyl nitrate species group from ∼10 days to ∼1 day based on work by Canty et al. 2015, to develop the ;c3 Science; model scenario. Simulations with these adjustments further improve model representation of the atmosphere. We calculate the ratio of column formaldehyde (HCHO) and tropospheric column nitrogen dioxide (NO2) using observations from the Ozone

Evaluation of copper, aluminum bronze, and copper-nickel for YMP [Yucca Mountain Project] container material

International Nuclear Information System (INIS)

Kass, J.N.

1989-05-01

In this presentation, I will discuss our evaluation of the materials copper, 7% aluminum bronze, and 70/30 copper-nickel. These are three of the six materials currently under consideration as potential waste-packaging materials. I should mention that we are also considering alternatives to these six materials. This work is part of the Yucca Mountain Project (YMP), formerly known as the Nevada Nuclear Waste Storage Investigations (NNWSI) Project. The expected-case environment in our proposed vault is quite different from that encountered at the WIPP site or that expected in a Canadian vault. Our proposed site is under a desert mountain, Yucca Mountain, in southern Nevada. The repository itself will be located approximately 700 feet above the water table and 300 to 1200 feet below the surface of the mountain. The variations in these numbers are due to the variations in mountain topography

Geographical positioning using laser optical instrument for near-shore underwater archaeological explorations

Digital Repository Service at National Institute of Oceanography (India)

Ganesan, P.

carefully identified comers of the underwater artifacts) is found to be more accurate, faster, and reliable. This method can be effectively used only for shallow water near shore underwater archaeo- GLIMPSES OF MARINE ARCHAEOLOGY IN INDIA logical... Trak (placed over selected ground controi station) and a multi-prism (placed over carefully identified comers of the artifact). The standard survey procedures prescribed in the Laser Trak operation manual (Make III model) were used to carry out...

Phytobenthic communities of intertidal rock pools in the eastern islands of Azores and their relation to position on shore and pool morphology

OpenAIRE

Wallenstein, Francisco; Peres, Sara D.; Xavier, Emanuel D.; Neto, Ana I.

2010-01-01

This study aimed to characterize algal composition inside rock-pools from two islands of the Azores archipelago (São Miguel and Santa Maria) and relate it to shore height and pool morphology. Pools were categorized as upper, medium and lower intertidal according to the surrounding communities. Maximum depth and surface area were used to reflect morphology and qualitative sampling to evaluate algal species richness. PRIMER software assessed the similarity across islands, sites, shore height...

Supplying Spin-Offs: Collaboration Practices in the Perpetuation of an Organizaton

Directory of Open Access Journals (Sweden)

Katja Maria Hydle

2016-01-01

Full Text Available This paper focuses on the collaboration practices between spin-offs and their customers and suppliers. With empirical material from seven cases of incumbentbacked spin-offs, we find that suppliers are highly involved in the development of the innovation that spin-offs are based upon and specifically, the practices of understanding customers, identifying a market gap and collaborating with suppliers. We contribute to the spin-off literature by revealing which activities are at play for successful spin-offs, and we contribute to practice theory by empirically uncovering the general understandings in the perpetuation of an organization and the nets between the spin-offs and their suppliers.

UAS Integration in the NAS Project Test Site Kick-off Meeting

Science.gov (United States)

Kopardekar, Parimal; Witzberger, Kevin; Hackenberg, Davis L.; Murphy, Jim

2015-01-01

This briefing was presented during the Test Site Kick Off Meeting to discuss the contract awards for Task 1 and Task 2. This briefing covered a high level overview for contract deliverables, Task 1 - UAS Traffic Management and Task 2, Live Virtual Constructive Distributed Environment.

SYNCHRONIZATION OF NATIONAL GRID NETWORK WITH THE ELECTRICITY SHIPS NETWORK IN THE "SHORE TO SHIP" SYSTEM

Directory of Open Access Journals (Sweden)

Dariusz TARNAPOWICZ

2013-07-01

Full Text Available ‘Shore to ship’ system – ships’ power supply from the local electrical substations – is one of the effective ways to limit the negative impact of the ships lying in ports on the environment. Energy infrastructure of the port installation necessary to provide ships with power supply has to be designed so that different types of ships can use it. The important issue concerning ‘shore to ship’ system is the quality of power supply. This can be achieved via sustaining continuity of power supply while switching from the ships’ electrical network over to the national grid. In this article the author presents the way of synchronizing the national grid with the ships’ electrical network during ship’s lying in port. Such synchronization would allow for uninterruptible work of the ship’s electrical devices.

Profile of Students' Creative Thinking Skills on Quantitative Project-Based Protein Testing using Local Materials

Directory of Open Access Journals (Sweden)

D. K. Sari

2017-04-01

Full Text Available The purpose of this study is to obtain a profile of students’ creative thinking skills on quantitative project-based protein testing using local materials. Implementation of the research is using quasi-experimental method pre-test post-test control group design with 40 students involved in Biochemistry lab. The research instrument is pre-test and post-test using creative thinking skills in the form of description and students’ questionnaire. The analysis was performed with SPSS 22.0 program to see the significance normality, U Mann-Whitney test for nonparametric statistics, N-Gain score, and the percentage of student responses to the practicum performed. The research result shows that the pretest rate in the experimental group is 8.25 while in the control group is 6.90. After attending a project-based practicum with local materials, the experimental group obtained the mean of posttest is 37.55 while in control class is 11.18. The students’ improvement on creative thinking skills can be seen from the average of N-Gain in the experimental class with 0.32 (medium category and in the control category with 0.05 (low category. The experimental and control class have different creative thinking skills significantly different fluency, flexibility, novelty, and detail. It can be concluded that quantitative project-based protein testing using local materials can improve students’ creative thinking skills. 71% of total students feel that quantitative project-based protein testing using local materials make them more creative in doing a practicum in the laboratory.

"Big Bang"test put off until May 2008

CERN Multimedia

2007-01-01

"First tests in a scientific project aimed at solving mysteries of the universe and the "Big Bang" which created it have been put off from November to late april or early May next year, an official said yesterday." (2/3 page)

Near-shore Antarctic pH variability has implications for the design of ocean acidification experiments

Science.gov (United States)

Kapsenberg, Lydia; Kelley, Amanda L.; Shaw, Emily C.; Martz, Todd R.; Hofmann, Gretchen E.

2015-01-01

Understanding how declining seawater pH caused by anthropogenic carbon emissions, or ocean acidification, impacts Southern Ocean biota is limited by a paucity of pH time-series. Here, we present the first high-frequency in-situ pH time-series in near-shore Antarctica from spring to winter under annual sea ice. Observations from autonomous pH sensors revealed a seasonal increase of 0.3 pH units. The summer season was marked by an increase in temporal pH variability relative to spring and early winter, matching coastal pH variability observed at lower latitudes. Using our data, simulations of ocean acidification show a future period of deleterious wintertime pH levels potentially expanding to 7–11 months annually by 2100. Given the presence of (sub)seasonal pH variability, Antarctica marine species have an existing physiological tolerance of temporal pH change that may influence adaptation to future acidification. Yet, pH-induced ecosystem changes remain difficult to characterize in the absence of sufficient physiological data on present-day tolerances. It is therefore essential to incorporate natural and projected temporal pH variability in the design of experiments intended to study ocean acidification biology.

Production and diffusion of technological knowledge on environment licenses on shore: an experience of CEFET-RN and PROMINP; Producao e difusao de conhecimentos tecnologicos sobre licenciamento ambiental 'on shore': uma experiencia do CEFET-RN e do PROMINP

Energy Technology Data Exchange (ETDEWEB)

Pagado, Erika Araujo da Cunha; Silva, Valdenildo Pedro da [Centro Federal de Educacao Tecnologica do Rio Grande do Norte (CEFET-RN), Natal, RN (Brazil)

2008-07-01

This paper presents an initiative of the CEFET-RN and the PROMINP of execution of a course of specialization directed toward the production and diffusion of technological knowledge and the qualification of professionals who can act, in the elaboration of environment studies of enterprises in the area of oil and gas on shore. The qualification of professionals and companies is considered important so that can act in the activity of oil and natural gas environment licensing, in accordance with the principles which guides Brazilian environment normalization, in search of the sustainable development. The objective of the course is specialize professionals to act in the area of environment management, planning, coordination, management and execution of activities to the environment area, attempting against the principles of sustainable management. Moreover, it aims at to deepen the knowledge about the elaboration, installment of consulting and assessor of public and private institutions, in regards to act of environment studies, directed toward the petroliferous activity on Shore. The course is developed by means of instructions modules that contemplate knowledge of diverse areas of science and, mainly, of the petroliferous and environment activity. The achievement of the modules contributes to improve the qualification of involved professionals with the elaboration of environment studies that are demanded in the processes of environment licensing of activities of the area of oil and gas on shore. (author)

Nearshore circulation in relation to effluent disposal off Thal, Maharashtra, west coast of India

Digital Repository Service at National Institute of Oceanography (India)

Swamy, G.N.; Suryanarayana, A.

of the flow pattern has been prepared for the three prominent seasons. The waters beyond Khanderi Island described a course roughly parallel to the shore, whereas shallower waters exhibited cross-shore tendencies and irregularities, rendering them unsuitable...

Analysis of fish movements between Great Lakes coastal wetlands and near shore habitat via otolith microchemistry

Science.gov (United States)

Great Lakes coastal wetlands are unique habitats with physical connections with near shore environments. This facilitates the exchange of energy between habitats in a principle known as habitat coupling. Coupling can be facilitated by movements of consumers; however, wetland us...

Active Learning through Materials Development: A Project for the Advanced L2 Classroom

Directory of Open Access Journals (Sweden)

Katrina Daly Thompson

2008-01-01

Full Text Available Building on the notion of active learning, the assumption that students learn more when given opportunities to practice using their skills and to receive feedback on their performance, this article de-scribes a project undertaken in an Advanced (third-year Swahili course in which students were given the opportunity to develop L2 materials for computer-mediated peer instruction. The article exam-ines the goals, design and results of the project in light of the litera-ture on active learning and learner autonomy, and suggests how the project might be improved in order to serve as a model for other Ad-vanced L2 courses.

Using Case Studies to Teach About Global Issues, The Sahel: The "Shore" of Disaster

Science.gov (United States)

Hall, Susan J.

1974-01-01

Sahel is the Arabic word for "shore" and is applied to the Southern belt of the Sahara Desert now undergoing a severe drought. This article describes the lifestyle of a Tuareg herder as he and his family fight for survival. Discussion questions and possible solution to the problems are provided in the case study. (Author/DE)

Proliferation Resistance and Material Type considerations within the Collaborative Project for a European Sodium Fast Reactor

International Nuclear Information System (INIS)

Renda, Guido; Alim, Fatih; Cojazzi, Giacomo GM.

2015-01-01

The collaborative project for a European Sodium Fast Reactor (CP‑ESFR) is an international project where 25 European partners developed Research & Development solutions and concepts for a European sodium fast reactor. The project was funded by the 7. European Union Framework Programme and covered topics such as the reactor architectures and components, the fuel, the fuel element and the fuel cycle, and the safety concepts. Within sub‑project 3, dedicated to safety, a task addressed proliferation resistance considerations. The Generation IV International Forum (GIF) Proliferation Resistance and Physical Protection (PR and PP) Evaluation Methodology has been selected as the general framework for this work, complemented by punctual aspects of the IAEA‑INPRO Proliferation Resistance methodology and other literature studies - in particular for material type characterization. The activity has been carried out taking the GIF PR and PP Evaluation Methodology and its Addendum as the general guideline for identifying potential nuclear material diversion targets. The targets proliferation attractiveness has been analyzed in terms of the suitability of the targets’ nuclear material as the basis for its use in nuclear explosives. To this aim the PR and PP Fissile Material Type measure was supplemented by other literature studies, whose related metrics have been applied to the nuclear material items present in the considered core alternatives. This paper will firstly summarize the main ESFR design aspects relevant for PR following the structure of the GIF PR and PP White Paper template. An analysis on proliferation targets is then discussed, with emphasis on their characterization from a nuclear material point of view. Finally, a high‑level ESFR PR analysis according to the four main proliferation strategies identified by the GIF PR and PP Evaluation Methodology (concealed diversion, concealed misuse, breakout, clandestine production in clandestine facilities) is

New data on structure and radiological age of formations of Lapland granulite belt (Kandalaksha Shore of the White Sea)

Energy Technology Data Exchange (ETDEWEB)

Sukhanov, M K; Terekhov, E N; Levitskij, V I

1987-01-01

The structure and radiological age of granulite belt rocks along the White Sea shore from West to East have been investigated by the uranium-lead thermoisochronous method. The age of granulite metamorphism in the White Sea shore and Kola blocks, which separate the granulite belt, is estimated as 2.5-2.7 milliard years; the boundary for metamorphic transformations (1.8 milliard years) is distinctly fixed for granulite belt rocks. The most ancient values for ages have been obtained by zircons of biotite gneisses -2.7-2.8 milliard years, and from granite shingles in conglomerates, in zircons of which the value of 2.9 milliard years is fixed.

Change in coastal sedimentation conditions due to positive shore displacement in Oeregrundsgrepen

International Nuclear Information System (INIS)

Brydsten, Lars

1999-12-01

This report is a part the SKB project 'SAFE' (Safety Assessment of the Final Repository of Radioactive Operational Waste). The aim of project SAFE is to update the previous safety analysis of SFR-1. SFR-1 is a low and intermediate level radioactive waste disposal facility, which is situated in bedrock beneath the Baltic Sea, 1 km off the coast near the Forsmark Nuclear Power Plant. At a possible discharge of radionuclides from SFR-1 today, ground water currents will presumably transport the radionuclides to the sea bottom. Many radionuclides are able to absorb on to fine particles, and it is likely that the radionuclides would adsorb on to particles in the sediment or particles suspended in the seawater. The adsorption is strong, and therefore the dynamics of the radionuclides are governed by the dynamics of the fine particles. A mathematical model has been developed to simulate the resuspension of fine particles caused by wave movement. The model simulates the wave-induced near bottom water dynamics based on meteorological data. First, the wave's characteristics in deep water are calculated. Then the gradual change of the wave's characteristics is calculated as it reaches shallower water. The maximum near-bottom orbital velocity is calculated for the entire fetch distance, and the wave's ability to resuspend fine-grained particles is determined using well-known semiempirical methods. A large variety of weather conditions are simulated and the results are shown as a map for two different bottom types: accumulated bottoms (continual accumulation of fine grained particles and any radionuclides present) and erosional/accumulation bottoms (periods with accumulation alternating with periods with erosion). The model has been calibrated for four areas close to SFR-1, which provides a range of different sedimentation conditions. Since shore displacement is positive, currently approximately 60 cm per century, sedimentation conditions have fluctuated and will continue to

The REEME project: a cooperative model for sharing international medical education materials.

Science.gov (United States)

Iserson, Kenneth V

2008-07-01

Although the Internet has become an excellent source of medical education materials, in many specialties, including Emergency Medicine (EM), most of the information is in English. Few international EM practitioners can attend costly specialty conferences, importing foreign experts to teach at these conferences is costly and, even then, these experts are available for a limited time to relatively few people. Countries with minimal health care or medical education budgets find providing even basic materials for professional medical education difficult. An exciting international project now freely distributes Spanish language educational programs to health care professionals on topics relating to EM. The Recursos Educacionales en Español para Medicina de Emergencia (REEME; Educational Resources in Spanish for EM) Project (www.reeme.arizona.edu) was developed to overcome some of these problems by providing language-specific specialty information and widespread international availability, and by promoting international cooperation among professional health care educators. It also provides a ready source of Spanish medical vocabulary for those trying to learn the language. With computer support from the University of Arizona's Learning and Technology Center, REEME first went "live" on November 1, 2004. Three years later, as of November 1, 2007, the site had 575 programs from 411 donors representing 19 countries and the United Nations. There are currently about 645 downloads per month to users in 73 countries. The REEME Project demonstrates the power of the Internet as a means to achieve international cooperation in medical education, and can serve as a model for similar projects in other specialties and languages.

Am/Cm Vitrification Process: Vitrification Material Balance Calculations

International Nuclear Information System (INIS)

Smith, F.G.

2000-01-01

This report documents material balance calculations for the Americium/Curium vitrification process and describes the basis used to make the calculations. The material balance calculations reported here start with the solution produced by the Am/Cm pretreatment process as described in ``Material Balance Calculations for Am/Cm Pretreatment Process (U)'', SRT-AMC-99-0178 [1]. Following pretreatment, small batches of the product will be further treated with an additional oxalic acid precipitation and washing. The precipitate from each batch will then be charged to the Am/Cm melter with glass cullet and vitrified to produce the final product. The material balance calculations in this report are designed to provide projected compositions of the melter glass and off-gas streams. Except for decanted supernate collected from precipitation and precipitate washing, the flowsheet neglects side streams such as acid washes of empty tanks that would go directly to waste. Complete listings of the results of the material balance calculations are provided in the Appendices to this report

77 FR 53197 - Brandon Shores LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request...

Science.gov (United States)

2012-08-31

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER12-2510-000] Brandon Shores LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for Blanket Section 204 Authorization This is a supplemental notice in the above-referenced proceeding, of Brandon...

Integrated Wind Power Planning Tool

DEFF Research Database (Denmark)

Rosgaard, M. H.; Hahmann, Andrea N.; Nielsen, T. S.

This poster describes the status as of April 2012 of the Public Service Obligation (PSO) funded project PSO 10464 \\Integrated Wind Power Planning Tool". The project goal is to integrate a meso scale numerical weather prediction (NWP) model with a statistical tool in order to better predict short...... term power variation from off shore wind farms, as well as to conduct forecast error assessment studies in preparation for later implementation of such a feature in an existing simulation model. The addition of a forecast error estimation feature will further increase the value of this tool, as it...

Search for hidden high-Z materials inside containers with the Muon Portal Project

International Nuclear Information System (INIS)

Rocca, P La; Bandieramonte, M; Blancato, A A; Bonanno, D; Indelicato, V; Presti, D Lo; Petta, C; Antonuccio, V; Becciani, U; Belluso, M; Billotta, S; Bonanno, G; Costa, A; Garozzo, S; Massimino, P; Belluomo, F; Fallica, G; Leonora, E; Longhitano, F; Longo, S

2014-01-01

The Muon Portal is a recently born project that plans to build a large area muon detector for a noninvasive inspection of shipping containers in the ports, searching for the presence of potential fissile (U, Pu) threats. The technique employed by the project is the well-known muon tomography, based on cosmic muon scattering from high-Z materials. The design and operational parameters of the muon portal under construction will be described in this paper, together with preliminary simulation and test results

Search for hidden high-Z materials inside containers with the Muon Portal Project

Science.gov (United States)

La Rocca, P.; Antonuccio, V.; Bandieramonte, M.; Becciani, U.; Belluomo, F.; Belluso, M.; Billotta, S.; Blancato, A. A.; Bonanno, D.; Bonanno, G.; Costa, A.; Fallica, G.; Garozzo, S.; Indelicato, V.; Leonora, E.; Longhitano, F.; Longo, S.; Lo Presti, D.; Massimino, P.; Petta, C.; Pistagna, C.; Pugliatti, C.; Puglisi, M.; Randazzo, N.; Riggi, F.; Riggi, S.; Romeo, G.; Russo, G. V.; Santagati, G.; Valvo, G.; Vitello, F.; Zaia, A.; Zappalà, G.

2014-01-01

The Muon Portal is a recently born project that plans to build a large area muon detector for a noninvasive inspection of shipping containers in the ports, searching for the presence of potential fissile (U, Pu) threats. The technique employed by the project is the well-known muon tomography, based on cosmic muon scattering from high-Z materials. The design and operational parameters of the muon portal under construction will be described in this paper, together with preliminary simulation and test results.

Prospective elemental analysis of algal biomass accumulated at the dominican republic Shores during 2015

International Nuclear Information System (INIS)

Fernández, Fernando; Boluda, Carlos José; Olivera, Jesús; Gómez, Luis Alberto Guillermo Bolivar; Gómez, Enmanuel Echavarría Aris Mendis

2017-01-01

The massive accumulation and decomposition of the Sargassum natans and Sargassum fluitans brown seaweeds on the Antillean shores has become a major problem in Central America and the Caribbean, seriously affecting tourism. However, the value of the algal biomass should not be underestimated, since it contains bioactive compounds with industrial application or in a more traditional use as fertilizers. On the other hand, seaweeds have the ability to bioaccumulate toxic metals such as Hg, Pb, Cd, Ni and Cr, among others. In order to ensure the safety of this biological material in its possible applications, it has been carried out a prospective study of the content in different transition metals and rare earths. Slightly elevated mercury levels were detected, which could limit the use of biomass. The content in Sc (scandium), Y (yttrium) and 14 lanthanides (La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu), collectively known as rare earths, was also determined, being higher than in the ocean levels. This is consistent with the hypothesis that places the origin of these algae to more southern latitudes, where they proliferate in the shelter of the mouth of large rivers. (author)

PROSPECTIVE ELEMENTAL ANALYSIS OF ALGAL BIOMASS ACUMULATED AT THE DOMINICAN REPUBLIC SHORES DURING 2015

Directory of Open Access Journals (Sweden)

Fernando Fernández

2017-01-01

Full Text Available The massive accumulation and decomposition of the Sargassum natans and Sargassum fluitans brown seaweeds on the Antillean shores has become a major problem in Central America and the Caribbean, seriously affecting tourism. However, the value of the algal biomass should not be underestimated, since it contains bioactive compounds with industrial application or in a more traditional use as fertilizers. On the other hand, seaweeds have the ability to bioaccumulate toxic metals such as Hg, Pb, Cd, Ni and Cr, among others. In order to ensure the safety of this biological material in its possible applications, it has been carried out a prospective study of the content in different transition metals and rare earths. Slightly elevated mercury levels were detected, which could limit the use of biomass. The content in Sc (scandium, Y (yttrium and 14 lanthanides (La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu, collectively known as rare earths, was also determined, being higher than in the ocean levels. This is consistent with the hypothesis that places the origin of these algae to more southern latitudes, where they proliferate in the shelter of the mouth of large rivers.

Liebherr lifts off with east coast projects

Energy Technology Data Exchange (ETDEWEB)

Anon

2004-11-01

Liebherr is one of the world's leading manufacturers of construction machinery, and is the supplier of technically-innovative user-oriented products and services not only to the oil industry but also to other industries using heavy lifting equipment. The Newfoundland and Labrador offshore oil and gas sector has been a special springboard of success for the company; they have seven offshore cranes working on three installations, and as the White Rose floating production vessel sails to the Grand Banks in 2005, the number will increase to nine. The other cranes are on the Hibernia platform, the Terra Nova FPSO, and the Henry Goodrich drilling rig. Two of the cranes on the Terra Nova FPSO have a lift capacity of 40 tons, while a third crane mounted at the rear of the vessel has a 20 ton capacity. They are capable of performing loading operations in seas as high as three metres. These cranes are powerful, compact and maneuverable, and feature ultra-modern mobile crane technology that satisfies combined road and off-road operating requirements on construction sites of all kinds. 2 photos.

Effect of flat insoles with different shore A values on posture stability in diabetic neuropathy

NARCIS (Netherlands)

Van Geffen, J.A.; Dijkstra, P.U.; Hof, A.L.; Halbertsma, J.P.K.; Postema, K.

The objective of the study was to determine whether insoles with a low Shore A value (15 degrees) as prescribed for patients with a diabetic neuropathy have a negative effect on posture stability because these insoles may reduce somatosensory input under the feet. It was conducted in the Center for

76 FR 1666 - Susquehanna Union Railroad Company-Control Exemption-North Shore Railroad Company, Nittany & Bald...

Science.gov (United States)

2011-01-11

... rail transportation system that will continue to meet the needs of the shipping public. 49 U.S.C. 10101... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [STB FD 35343] Susquehanna Union... 49 U.S.C. 11323(a)(4) to acquire 100% stock control of 6 Class III railroads: North Shore Railroad...

Progress in mass spectrometry for the analysis of set-off phenomena in plastic food packaging materials.

Science.gov (United States)

Aznar, Margarita; Alfaro, Pilar; Nerín, Cristina; Jones, Emrys; Riches, Eleanor

2016-07-01

In most cases, food packaging materials contain inks whose components can migrate to food by diffusion through the material as well as by set-off phenomena. In this work, different mass spectrometry approaches had been used in order to identify and confirm the presence of ink components in ethanol (95%) and Tenax(®) as food simulants. Three different sets of materials, manufactured with different printing technologies and with different structures, were analyzed. Sample analysis by ultra performance liquid chromatography mass spectrometry (UPLC-MS), using a quadrupole-time of flight (Q-TOF) as a mass analyser proved to be an excellent tool for identification purposes while ion mobility mass spectrometry (IM-MS) shown to be very useful for the confirmation of the candidates proposed. The results showed the presence of different non-volatile ink components in migration such as colorants (Solvent Red 49), plasticizers (dimethyl sebacate, tributyl o-acetyl citrate) or surfactants (SchercodineM, triethylene glycol caprilate). An oxidation product of an ink additive (triphenyl phosphine oxide) was also detected. In addition, a surface analysis technique, desorption electrospray mass spectrometry (DESI-MS), was used for analyzing the distribution of some ink components (tributyl o-acetyl citrate Schercodine L, phthalates) in the material. The detection of some of these compounds in the back-printed side confirmed the transference of this compound from the non-food to the food contact side. The results also showed that concentration of ink migrants decreased when an aluminum or polypropylene layer covered the ink. When aluminum was used, concentration of most of ink migrants decreased, and for 5 out of the 9 even disappeared. Copyright © 2016 Elsevier B.V. All rights reserved.

Fabrication of plate for special applications by USIMINAS (Usinas Siderurgicas de Minas Gerais S/A)

International Nuclear Information System (INIS)

Andrade, S.L. de; Miyashita, T.; Hanan, I.

1982-01-01

Some aspects of the development of plate for applications in off-shore platforms, hydroelectric and nuclear industry, pressure vessels, heavy equipment and linepipe, have been discussed. Also dealt with are materials with special charateristics such as through-thickness ductility, tensile and impact properties after stress relief and ageing heat treatments, low temperature impact properties together with guaranteed ultrasonic quality that have been developed by USIMINAS in recent years. (Author) [pt

Law project on the radioactive materials and wastes management 2006 recommendations presented by Anne Duthilleul

International Nuclear Information System (INIS)

2006-01-01

This document provides recommendations on the law project concerning the radioactive material and wastes management. It precises the law objectives, the french particularities concerning the radioactive wastes and materials management, the public debate in France, the evaluation of the researches, the recommendations of the economic and social council. (A.L.B.)

Bibliography of documents and related materials collected for the Hawaii Geothermal Project Environmental Impact Statement

Energy Technology Data Exchange (ETDEWEB)

Glenn, F.M.; Boston, C.R.; Burns, J.C.; Hagan, C.W. Jr.; Saulsbury, J.W.; Wolfe, A.K.

1995-03-01

This report has been prepared to make available and archive information developed during preparation of the Environmental Impact Statement for Phases 3 and 4 of the Hawaii Geothermal Project as defined by the state of Hawaii in its April 1989 proposal to Congress. On May 17, 1994, the USDOE published a notice in the Federal Register withdrawing its Notice of Intent of February 14, 1992, to prepare the HGP EIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. This report provides a bibliography of documents, published papers, and other reference materials that were obtained or used. The report provides citations for approximately 642 documents, published papers, and other reference materials that were gathered to describe the potentially affected environment on the islands of Hawaii, Maui, and Oahu. The listing also does not include all the reference materials developed by support subcontractors and cooperating agencies who participated in the project. This listing does not include correspondence or other types of personal communications. The documents listed in this report can be obtained from original sources or libraries.

Strategies for obtaining obsidian in pre-European contact era New Zealand.

Science.gov (United States)

McCoy, Mark D; Carpenter, Jonathan

2014-01-01

Archaeological evidence of people's choices regarding how they supply themselves with obsidian through direct access and different types of exchanges gives us insight in to mobility, social networks, and property rights in the distant past. Here we use collections of obsidian artefacts that date to a period of endemic warfare among Maori during New Zealand's Late Period (1500-1769 A.D.) to determine what strategies people engaged in to obtain obsidian, namely (1) collecting raw material directly from a natural source, (2) informal trade and exchange, and (3) formal trade and exchange. These deposits represent a good cross-section of Late Period archaeology, including primary working of raw material at a natural source (Helena Bay), undefended sites where people discarded rubbish and worked obsidian (Bream Head), and a heavily fortified site (Mt. Wellington). We find that most of the obsidian described here was likely obtained directly from natural sources, especially those located on off-shore islands within about 60-70 km of sites. A smaller amount comes from blocks of material transported from an off-shore island a greater distance away, called Mayor Island, in a formal trade and exchange network. This study demonstrates the value of conducting tandem lithic technology and geochemical sourcing studies to understand how people create and maintain social networks during periods of warfare.

Strategies for obtaining obsidian in pre-European contact era New Zealand.

Directory of Open Access Journals (Sweden)

Mark D McCoy

Full Text Available Archaeological evidence of people's choices regarding how they supply themselves with obsidian through direct access and different types of exchanges gives us insight in to mobility, social networks, and property rights in the distant past. Here we use collections of obsidian artefacts that date to a period of endemic warfare among Maori during New Zealand's Late Period (1500-1769 A.D. to determine what strategies people engaged in to obtain obsidian, namely (1 collecting raw material directly from a natural source, (2 informal trade and exchange, and (3 formal trade and exchange. These deposits represent a good cross-section of Late Period archaeology, including primary working of raw material at a natural source (Helena Bay, undefended sites where people discarded rubbish and worked obsidian (Bream Head, and a heavily fortified site (Mt. Wellington. We find that most of the obsidian described here was likely obtained directly from natural sources, especially those located on off-shore islands within about 60-70 km of sites. A smaller amount comes from blocks of material transported from an off-shore island a greater distance away, called Mayor Island, in a formal trade and exchange network. This study demonstrates the value of conducting tandem lithic technology and geochemical sourcing studies to understand how people create and maintain social networks during periods of warfare.

Effects of Changing Weather, Oceanographic Conditions, and Land Uses on Spatio-Temporal Variation of Sedimentation Dynamics along Near-Shore Coral Reefs

Directory of Open Access Journals (Sweden)

Abimarie Otaño-Cruz

2017-08-01

Full Text Available Sedimentation is a critical threat to coral reefs worldwide. Major land use alteration at steep, highly erodible semi-arid islands accelerates the potential of soil erosion, runoff, and sedimentation stress to nearshore coral reefs during extreme rainfall events. The goal of this study was to assess spatio-temporal variation of sedimentation dynamics across nearshore coral reefs as a function of land use patterns, weather and oceanographic dynamics, to identify marine ecosystem conservation strategies. Sediment was collected at a distance gradient from shore at Bahia Tamarindo (BTA and Punta Soldado (PSO coral reefs at Culebra Island, Puerto Rico. Sediment texture and composition were analyzed by dry sieving and loss-on-ignition techniques, and were contrasted with environmental variables for the research period (February 2014 to April 2015. Rainfall and oceanographic data were analyzed to address their potential role on affecting sediment distribution with BEST BIO-ENV, RELATE correlation, and linear regression analysis. A significant difference in sedimentation rate was observed by time and distance from shore (PERMANOVA, p < 0.0100, mostly attributed to higher sediment exposure at reef zones closer to shore due to strong relationships with coastal runoff. Sedimentation rate positively correlated with strong rainfall events (Rho = 0.301, p = 0.0400 associated with storms and rainfall intensity exceeding 15 mm/h. At BTA, sediment deposited were mostly composed of sand, suggesting a potential influence of resuspension produced by waves and swells. In contrast, PSO sediments were mostly composed of silt-clay and terrigenous material, mainly attributed to a deforestation event that occurred at adjacent steep sub-watershed during the study period. Spatial and temporal variation of sedimentation pulses and terrigenous sediment input implies that coral reefs exposure to sediment stress is determined by local land use patterns, weather, and

ARCHER Project: Progress on Material and component activities for the Advanced High Temperature Reactor

International Nuclear Information System (INIS)

Buckthorpe, D.E.

2014-01-01

The ARCHER (Advanced High-Temperature Reactors for Cogeneration of Heat and Electricity R&D) integrated project is a four year project which was started in 2011 as part of the European Commission 7th Framework Programme (FP7) to perform High Temperature Reactor technology R&D in support of reactor demonstration. The project consortium encompasses conventional and Nuclear Industry, Utilities, Technical Support Organizations, Research & Development Organizations and Academia. The activities involved contribute to the Generation IV (GIF) International Forum and collaborate with related projects in the US, China, Japan, and the Republic of Korea in cooperation with IAEA and ISTC. This paper addresses the progress of the work on ARCHER materials and component activities since the start of the project and underlines some of the main conclusions reached. (author)

Are rocky shore ecosystems affected by nutrient-enriched seawater? Some preliminary results from a mesocosm experiment

NARCIS (Netherlands)

Bokn, T.L.; Moy, F.E.; Christie, H.; Engelbert, S.; Karez, R.; Kersting, K.; Kraufvelin, P.; Lindblad, C.; Marba, N.; Pedersen, M.F.; Sorensen, K.

2002-01-01

The response of rocky shore ecosystems to increased nutrient availability was examined in eight land-based mesocosms designed for hard-bottom littoral communities built at Marine Research Station Solbergstrand (Norway). The average seawater volume in each basin was 9 m3 with an average water

De Novo Design of Boron-Based Host Materials for Highly Efficient Blue and White Phosphorescent OLEDs with Low Efficiency Roll-Off.

Science.gov (United States)

Xue, Miao-Miao; Huang, Chen-Chao; Yuan, Yi; Cui, Lin-Song; Li, Yong-Xi; Wang, Bo; Jiang, Zuo-Quan; Fung, Man-Keung; Liao, Liang-Sheng

2016-08-10

Borane is an excellent electron-accepting species, and its derivatives have been widely used in a variety of fields. However, the use of borane derivatives as host materials in OLEDs has rarely reported because the device performance is generally not satisfactory. In this work, two novel spiro-bipolar hosts with incorporated borane were designed and synthesized. The strategies used in preparing these materials were to increase the spatial separation of the highest occupied molecular orbitals (HOMOs) and lowest unoccupied molecular orbitals (LUMOs) in the molecules, tune the connecting positions of functional groups, and incorporate specific functional groups with desirable thermal stability. Based on these designs, phosphorescent OLEDs with borane derivatives as hosts and with outstanding device performances were obtained. In particular, devices based on SAF-3-DMB/FIrpic exhibited an external quantum efficiency (EQE) of >25%. More encouragingly, the device was found to have quite a low efficiency roll-off, giving an efficiency of >20% even at a high brightness of 10000 cd/m(2). Furthermore, the EQE of the three-color-based (R + G + B) white OLED employing SAF-3-DMB as a host was also as high as 22.9% with CIE coordinates of (x, y) = (0.40, 0.48). At a brightness of 5000 cd/m(2), there was only a 3% decrease in EQE from its maximum value, implying a very low efficiency roll-off.

Z-Plant material information tracking system (ZMITS) software development and integration project management plan

International Nuclear Information System (INIS)

IBSEN, T.G.

1999-01-01

This document plans for software and interface development governing the implementation of ZMITS and other supporting systems necessary to manage information for material stabilization needs of the Project Hanford Management Contract (PHMC)

Shore protection for the coast of Mousuni Island in West Bengal, India

Directory of Open Access Journals (Sweden)

V Sundar

2016-08-01

Full Text Available The Mousuni Island in West Bengal, India is wide-open to Bay of Bengal. This island by virtue of its location is exposed to river flow as well as wave action. It is thus subjected to severe erosion along its south-western coastal stretch and also significantly affecting agriculture due to seawater inundation. This is due to the lower level of bund crest elevation combined with high water levels during coastal flooding. The most suitable method to arrest the shore erosion and salt water intrusion is to divert the flow gradually toward the deeper section of the channel. To meet this requirement, after carrying out a comprehensive profiling of the existing bund, bank connected series of spurs with locally available construction materials and unskilled labor are proposed. In order to design these spurs, the magnitude and direction of sediment movement along the stretch is estimated. The layout of protection measures is proposed based on a detailed analysis of site conditions and the environmental conditions. The tranquility inside the proposed coastal protecting structure is substantiated with a two-dimensional horizontal flow model. Furthermore, the behavior of the shorelines has been studied numerically with the proposed coastal protection measure. The detailed analysis of the results from the numerical model and the protection measure are discussed in this article.

All (4,1): Sigma models with (4,q) off-shell supersymmetry

Energy Technology Data Exchange (ETDEWEB)

Hull, Chris [The Blackett Laboratory, Imperial College London,Prince Consort Road London SW7 @AZ (United Kingdom); Lindström, Ulf [The Blackett Laboratory, Imperial College London,Prince Consort Road London SW7 @AZ (United Kingdom); Department of Physics and Astronomy, Division of Theoretical Physics,Uppsala University, Box 516, SE-751 20 Uppsala (Sweden)

2017-03-08

Off-shell (4,q) supermultiplets in 2-dimensions are constructed for q=1,2,4. These are used to construct sigma models whose target spaces are hyperkähler with torsion. The off-shell supersymmetry implies the three complex structures are simultaneously integrable and allows us to construct actions using extended superspace and projective superspace, giving an explicit construction of the target space geometries.

The manufacturing and metrology of off-axis mirrors

Science.gov (United States)

Penzkofer, Karlheinz; Rascher, Rolf; Küpper, Lutz; Liebl, Johannes

2015-10-01

Especially in the area of the large mirror manufacturing only a few manufacturers are capable to produce optical surfaces of high quality. Therefore a deterministic process should be developed in the project IFasO. In the field of telescope optics off-axis optical systems are becoming increasingly important. These systems try to avoid an obstructing of the incoming light by moving the secondary mirror out of the primary mirror's optical axis. This advantage leads to an increasing market for this type of optical surface. Until now off-axis mirrors were difficult or almost impossible to produce. With the processes developed in IFasO, high quality mirrors become possible. For this reason, this paper describes the manufacturing of off-axis surfaces and its problems. The mirror production used in the project IFasO is based on the specific design of the CNC center developed by the company Optotech. This center UPG2000 is capable of grinding, polishing, sagitta measurement and interferometric measurement in one mounting of the specimen. Usually a large optics has to be transported during their manufacturing after every individual process step. There is always a risk of damage of the specimen. The exact orientation of the surface relatively to the tool position is also required. This takes a huge amount of time and makes up most of the production time. In this presentation the use of UPG2000 and the next steps within the process development are described. In the current status the manufacturing of large off-axis elements with a PV < λ/10 rms is reproducible.

NaNet3: The on-shore readout and slow-control board for the KM3NeT-Italia underwater neutrino telescope

Directory of Open Access Journals (Sweden)

Ammendola R.

2016-01-01

Full Text Available The KM3NeT-Italia underwater neutrino detection unit, the tower, consists of 14 floors. Each floor supports 6 Optical Modules containing front-end electronics needed to digitize the PMT signal, format and transmit the data and 2 hydrophones that reconstruct in real-time the position of Optical Modules, for a maximum tower throughput of more than 600 MB/s. All floor data are collected by the Floor Control Module (FCM board and transmitted by optical bidirectional virtual point-to-point connections to the on-shore laboratory, each FCM needing an on-shore counterpart as communication endpoint. In this contribution we present NaNet3, an on-shore readout board based on Altera Stratix V GX FPGA able to manage multiple FCM data channels with a capability of 800 Mbps each. The design is a NaNet customization for the KM3NeT-Italia experiment, adding support in its I/O interface for a synchronous link protocol with deterministic latency at physical level and for a Time Division Multiplexing protocol at data level.

NaNet3: The on-shore readout and slow-control board for the KM3NeT-Italia underwater neutrino telescope

Science.gov (United States)

Ammendola, R.; Biagioni, A.; Frezza, O.; Lo Cicero, F.; Martinelli, M.; Paolucci, P. S.; Pontisso, L.; Simula, F.; Vicini, P.; Ameli, F.; Nicolau, C. A.; Pastorelli, E.; Simeone, F.; Tosoratto, L.; Lonardo, A.

2016-04-01

The KM3NeT-Italia underwater neutrino detection unit, the tower, consists of 14 floors. Each floor supports 6 Optical Modules containing front-end electronics needed to digitize the PMT signal, format and transmit the data and 2 hydrophones that reconstruct in real-time the position of Optical Modules, for a maximum tower throughput of more than 600 MB/s. All floor data are collected by the Floor Control Module (FCM) board and transmitted by optical bidirectional virtual point-to-point connections to the on-shore laboratory, each FCM needing an on-shore counterpart as communication endpoint. In this contribution we present NaNet3, an on-shore readout board based on Altera Stratix V GX FPGA able to manage multiple FCM data channels with a capability of 800 Mbps each. The design is a NaNet customization for the KM3NeT-Italia experiment, adding support in its I/O interface for a synchronous link protocol with deterministic latency at physical level and for a Time Division Multiplexing protocol at data level.

Investigation of production of continuous off axis fibre reinforced thermoplastic material

Science.gov (United States)

McDonald, Philip C.

Fibre reinforced composites have been used in the engineering industry for many years since the discovery of glass fibre in 1930 and its first use to reinforce phenolic resin to form Bakelite. Since then thermoplastic and thermosetting composites have spread into almost every industry from marine to aerospace, automotive to motorsport, luggage to the hobby industry and even fashion. This vast range of applications for composite materials is due to their high strength to weight ratio, excellent impact absorption properties, lack of corrosion, and reformability. In recent years a government directive has forced automotive manufacturers to look at lighter and more efficient vehicles to reduce carbon emissions. This can be achieved by using fibre reinforced thermoplastics to replace steel panels throughout the vehicle.Steel panels from a Nissan Qashqai were tested to determine the failure loads of each panel which the replacement thermoplastic material had to match or better. After extensive testing in a laboratory a tailored laminate lay-up with 5 laminate layers has been developed to replace structural steel components in vehicles. This tailored laminate stack up has a higher failure load than the steel components tested from the Nissan Qashqai while reducing the mass by at least 50%. The key drivers within the automotive industry are fuel savings and reduced vehicle mass, the use of this material and the potential it has in the mass production automotive industry can have a high impact on the overall mass of the vehicle which would invariably have a positive effect to the fuel consumption, thereby improving fuel economy in petrol and diesel vehicles, and increasing the range of electric vehicles.Throughout this project a prototype machine was developed and built to achieve mass production of this 5 ply laminate at a rate of more than 345,000 laminates per year with a processing cost of 3 1p making it available to the mass production market. The estimated production

Accident and Off-Normal Response and Recovery from Multi-Canister Overpack (MCO) Processing Events

International Nuclear Information System (INIS)

ALDERMAN, C.A.

2000-01-01

In the process of removing spent nuclear fuel (SNF) from the K Basins through its subsequent packaging, drymg, transportation and storage steps, the SNF Project must be able to respond to all anticipated or foreseeable off-normal and accident events that may occur. Response procedures and recovery plans need to be in place, personnel training established and implemented to ensure the project will be capable of appropriate actions. To establish suitable project planning, these events must first be identified and analyzed for their expected impact to the project. This document assesses all off-normal and accident events for their potential cross-facility or Multi-Canister Overpack (MCO) process reversal impact. Table 1 provides the methodology for establishing the event planning level and these events are provided in Table 2 along with the general response and recovery planning. Accidents and off-normal events of the SNF Project have been evaluated and are identified in the appropriate facility Safety Analysis Report (SAR) or in the transportation Safety Analysis Report for Packaging (SARP). Hazards and accidents are summarized from these safety analyses and listed in separate tables for each facility and the transportation system in Appendix A, along with identified off-normal events. The tables identify the general response time required to ensure a stable state after the event, governing response documents, and the events with potential cross-facility or SNF process reversal impacts. The event closure is predicated on stable state response time, impact to operations and the mitigated annual occurrence frequency of the event as developed in the hazard analysis process

Multi-megawatt wind-power installations call for new, high-performance solutions

International Nuclear Information System (INIS)

2004-01-01

This article discusses the development of increasingly powerful and profitable wind-energy installations for off-shore, on-shore and refurbishment sites. In particular, the rapid development of megawatt-class units is discussed. The latest products of various companies with rotor diameters of up to 120 metres and with power ratings of up to 5 MW are looked at and commented on. The innovations needed for the reduction of weight and the extreme demands placed on gearing systems are discussed. Also, the growing markets for wind energy installations in Europe and the United States are discussed and plans for new off-shore wind parks are looked at

Teaching Reform of Civil Engineering Materials Course Based on Project-Driven Pedagogy

Science.gov (United States)

Yidong, Xu; Wei, Chen; WeiguoJian, You; Jiansheng, Shen

2018-05-01

In view of the scattered experimental projects in practical courses of civil engineering materials, the poor practical ability of students and the disconnection between practical teaching and theoretical teaching, this paper proposes a practical teaching procedure. Firstly, the single experiment should be offered which emphasizes on improving the students’ basic experimental operating ability. Secondly, the compressive experiment is offered and the overall quality of students can be examined in the form of project team. In order to investigate the effect of teaching reform, the comparative analysis of the students of three grades (2014, 2015 and 2016) majored in civil engineering was conducted. The result shows that the students’ ability of experimental operation is obviously improved by using the project driven method-based teaching reform. Besides, the students’ ability to analyse and solve problems has also been improved.

Forced wave induced by an atmospheric pressure disturbance moving towards shore

Science.gov (United States)

Chen, Yixiang; Niu, Xiaojing

2018-05-01

Atmospheric pressure disturbances moving over a vast expanse of water can induce different wave patterns, which can be determined by the Froude number Fr. Generally, Fr = 1 is a critical value for the transformation of the wave pattern and the well-known Proudman resonance happens when Fr = 1. In this study, the forced wave induced by an atmospheric pressure disturbance moving over a constant slope from deep sea to shore is numerically investigated. The wave pattern evolves from a concentric-circle type into a triangular type with the increase of the Froude number, as the local water depth decreases, which is in accord with the analysis in the unbounded flat-bottom cases. However, a hysteresis effect has been observed, which implies the obvious amplification of the forced wave induced by a pressure disturbance can not be simply predicted by Fr = 1. The effects of the characteristic parameters of pressure disturbances and slope gradient have been discussed. The results show that it is not always possible to observe significant peak of the maximum water elevation before the landing of pressure disturbances, and a significant peak can be generated by a pressure disturbance with small spatial scale and fast moving velocity over a milder slope. Besides, an extremely high run-up occurs when the forced wave hits the shore, which is an essential threat to coastal security. The results also show that the maximum run-up is not monotonously varying with the increase of disturbance moving speed and spatial scale. There exists a most dangerous speed and scale which may cause disastrous nearshore surge.

Conceptual Inadequacy of the Shore and Johnson Axioms for Wide Classes of Complex Systems

Directory of Open Access Journals (Sweden)

Constantino Tsallis

2015-05-01

Full Text Available It is by now well known that the Boltzmann-Gibbs-von Neumann-Shannon logarithmic entropic functional (\\(S_{BG}\\ is inadequate for wide classes of strongly correlated systems: see for instance the 2001 Brukner and Zeilinger's {\\it Conceptual inadequacy of the Shannon information in quantum measurements}, among many other systems exhibiting various forms of complexity. On the other hand, the Shannon and Khinchin axioms uniquely mandate the BG form \\(S_{BG}=-k\\sum_i p_i \\ln p_i\\; the Shore and Johnson axioms follow the same path. Many natural, artificial and social systems have been satisfactorily approached with nonadditive entropies such as the \\(S_q=k \\frac{1-\\sum_i p_i^q}{q-1}\\ one (\\(q \\in {\\cal R}; \\,S_1=S_{BG}\\, basis of nonextensive statistical mechanics. Consistently, the Shannon 1948 and Khinchine 1953 uniqueness theorems have already been generalized in the literature, by Santos 1997 and Abe 2000 respectively, in order to uniquely mandate \\(S_q\\. We argue here that the same remains to be done with the Shore and Johnson 1980 axioms. We arrive to this conclusion by analyzing specific classes of strongly correlated complex systems that await such generalization.

An evaluation of nursing and midwifery sign off mentors, new mentors and nurse lecturers' understanding of the sign off mentor role.

Science.gov (United States)

Rooke, Nickey

2014-01-01

This paper presents the findings of a small scale evaluation examining nursing and midwifery mentors and nursing lecturers perceptions of the Nursing and Midwifery Council 'sign off' mentor role (NMC, 2008). For this evaluation 114 new sign off mentors, 37 preparation for mentorship students and 13 nursing and midwifery lecturers within a Higher Education Institute (HEI) in the United Kingdom participated in the evaluation project. Nursing and midwifery students were not included in this initial evaluation. The initial findings suggested that all participants viewed the introduction of sign off mentors positively; offering a more robust mechanism for ensuring students were competent, helped to protect the public, and offered an increased level of support for students themselves. Concerns were raised about varying levels of support available for sign off mentors and some Stage 2 mentors' abilities to assess competence. Several participants felt the 1 h protected time per week per final placement student would be difficult to implement, whilst anxieties were also expressed about levels of responsibility for ensuring fitness to practice alongside concern that some mentors may leave sign off mentors to manage and identify under-achieving students. Copyright © 2013 Elsevier Ltd. All rights reserved.

International Standardization in the Design of "Shore to Ship" - Power Supply Systems of Ships in Port

Science.gov (United States)

Tarnapowicz, Dariusz; German-Galkin, Sergiej

2018-03-01

The decisive source of air pollution emissions in ports is the berthed ships. This is primarily caused by the work of ship's autonomous generator sets. One way of reducing the air pollution emissions in ports is the supply of ships from electricity inland system. The main problem connected with the power connection of ships to the inland network is caused by different values of levels and frequencies of voltages in these networks (in various countries) in relation to different values of levels and frequencies of voltages present in the ship's network. It is also important that the source power can range from a few hundred kW up to several MW. In order to realize a universal „Shore to Ship" system that allows the connection of ships to the electricity inland network, the international standardization is necessary. This article presents the current recommendations, standards and regulations for the design of „Shore to Ship" systems.

Project T100 -- Hazardous Materials Management and Emergency Response Training Center (HAMMER)

International Nuclear Information System (INIS)

Norton, C.E.

1994-01-01

The scope of this Quality Assurance Program Plan (QAPP) is to provide a system of Quality Assurance reviews and verifications on the design and construction of the Hazardous Materials Management and Emergency Response (HAMMER) Training Center, project 95L-EWT-100 at Hanford. The reviews and verifications will be on activities associated with design, procurement, and construction of the HAMMER project which includes, but is not limited to earthwork, placement of concrete, laying of rail, drilling of wells, water and sewer line fabrication and installation, communications systems, fire protection/detection systems, line tie-ins, building and mock-up (prop) construction, electrical, instrumentation, pump and valves and special coatings

Coastal seas as resource for Blue Growth - SmartSea project

Science.gov (United States)

Kotilainen, Aarno; Alvi, Kimmo; Boman, Anton; Hämäläinen, Jyrki; Kaskela, Anu; Rantataro, Jyrki; Vallius, Henry; Virtasalo, Joonas

2017-04-01

Blue growth is a long term strategy of the European Union (EU) to enhance the sustainable growth of the maritime sector. Our surrounding seas have been drivers for the European economy for a long time, but still they have great potential for further exploiting of natural resources and economic growth. Especially if the growth can be achieved in an environmentally sustainable way, benefits are obvious. It has been estimated that improvement of the state of the Baltic Sea would until 2030 create 900 000 jobs in the whole Baltic Sea area, mainly in Blue Tech, tourism, real estate and building businesses (Dahlgren et al. 2015). However, coastal seas already experience multiple stressors like off-shore construction, pollution, eutrophication, shipping, over-fishing, and climate change. In order to obtain sustainable Blue Growth, it is necessary to localize and assess the current maritime activities, estimate their growth potential, and investigate their present and future effects on each other and on the marine environment. The purpose of the SmartSea project is to support the growth of commercial marine activities in the Gulf of Bothnia region, in the northern Baltic Sea. The Gulf of Bothnia is an essential resource in terms of fish farming and wind power, for example, and it is also possible to make use of the geological resources of the gulf. Moreover, the rapid growth of the commercial marine activities and the consequences of the climate change may lead to conflicts between the different activities and harm the marine ecosystem of the Gulf of Bothnia. The SmartSea project aims to identify these risks and find solutions for the sustainable use of the sea. SmartSea project is funded by the Strategic Research Council of Academy of Finland, grant No: 292 985. The project will last for six years (2015-2020) and its funding totals nearly 8 million euros. The project involves close to 40 researchers from eight different institutions: the Finnish Meteorological Institute

Materials and process engineering projects for the Sandia National Laboratories/Newly Independent States Industrial Partnering Program. Volume 1

Energy Technology Data Exchange (ETDEWEB)

Zanner, F.J.; Moffatt, W.C.

1995-07-01

In July, 1994, a team of materials specialists from Sandia and U S Industry traveled to Russia and the Ukraine to select and fund projects in materials and process technology in support of the Newly Independent States/Industrial Partnering Program (NIS/IPP). All of the projects are collaborations with scientists and Engineers at NIS Institutes. Each project is scheduled to last one year, and the deliverables are formatted to supply US Industry with information which will enable rational decisions to be made regarding the commercial value of these technologies. This work is an unedited interim compilation of the deliverables received to date.

Materials and process engineering projects for the Sandia National Laboratories/Newly Independent States Industrial Partnering Program. Volume 2

International Nuclear Information System (INIS)

Zanner, F.J.; Moffatt, W.C.

1995-07-01

In July, 1994, a team of materials specialists from Sandia and US. Industry traveled to Russia and the Ukraine to select and fund projects in materials and process technology in support of the Newly Independent States/Industrial Partnering Program (NIS/IPP). All of the projects are collaborations with scientists and Engineers at NIS Institutes. Each project is scheduled to last one year, and the deliverables are formatted to supply US. Industry with information which will enable rational decisions to be made regarding the commercial value of these technologies. This work is an unedited interim compilation of the deliverables received to date

Materials and process engineering projects for the Sandia National Laboratories/Newly Independent States Industrial Partnering Program. Volume 2

Energy Technology Data Exchange (ETDEWEB)

Zanner, F.J.; Moffatt, W.C.

1995-07-01

In July, 1994, a team of materials specialists from Sandia and US. Industry traveled to Russia and the Ukraine to select and fund projects in materials and process technology in support of the Newly Independent States/Industrial Partnering Program (NIS/IPP). All of the projects are collaborations with scientists and Engineers at NIS Institutes. Each project is scheduled to last one year, and the deliverables are formatted to supply US. Industry with information which will enable rational decisions to be made regarding the commercial value of these technologies. This work is an unedited interim compilation of the deliverables received to date.

AFSC/NMML: Shore-based counts of the Eastern North Pacific gray whale stock from central California, 1967 - 2007

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The National Marine Fisheries Service (NMFS) has conducted shore-based counts of the Eastern North Pacific stock of gray whales (Eschrichtius robustus) 26 years from...

Development of Optimization method about Capital Structure and Senior-Sub Structure by considering Project-Risk

Science.gov (United States)

Kawamoto, Shigeru; Ikeda, Yuichi; Fukui, Chihiro; Tateshita, Fumihiko

Private finance initiative is a business scheme that materializes social infrastructure and public services by utilizing private-sector resources. In this paper we propose a new method to optimize capital structure, which is the ratio of capital to debt, and senior-sub structure, which is the ratio of senior loan to subordinated loan, for private finance initiative. We make the quantitative analysis of a private finance initiative's project using the proposed method. We analyze trade-off structure between risk and return in the project, and optimize capital structure and senior-sub structure. The method we propose helps to improve financial stability of the project, and to make a fund raising plan that is expected to be reasonable for project sponsor and moneylender.

Materials Science: A Spin-off in Research and Development

International Nuclear Information System (INIS)

Aduda, B.O.

2006-01-01

The scope materials science is wide since it is a multi/trans-disciplinary subject, and is based on physics and chemistry of solid state. It embraces all aspects of engineering materials, from the most basic to the most novel, and is concerned with how a material is assembled from the basic units, can be used, can be modified or improved to perform specific tasks. Further, it is concerned with proper selection of materials for specific applications, and development of new and improved materials with unique properties for the ever increasing and more demanding applications, e.g., aerogels, ceramic membranes for fuel cells, bioceramics for hip bone replacements, nanostructured photoactive thin films for solar cell, sensors and photocatalysis applications etc

76 FR 21637 - Safety Zone; Ford Estate Wedding Fireworks, Lake St. Clair, Grosse Pointe Shores, MI

Science.gov (United States)

2011-04-18

...-AA00 Safety Zone; Ford Estate Wedding Fireworks, Lake St. Clair, Grosse Pointe Shores, MI AGENCY: Coast... portion of Lake St. Clair River during the Ford Estate Wedding Fireworks. DATES: This rule is effective... vessels during the setup, loading, and launching of the Ford Estate Wedding Fireworks Display. The...

Spent Nuclear Fuel project interface control plan

International Nuclear Information System (INIS)

Reilly, M.A.

1995-01-01

This implementation process philosophy is in keeping with the ongoing reengineering of the WHC Controlled Manuals to achieve interface control within the SNF Project. This plan applies to all SNF Project sub-project to sub-project, and sub-project to exteranl (both on and off the Hanford Site) interfaces

Seasonal Dynamics of Stress Proteins in Leaves of Medicinal Plants in a Natural Environment of Irkutsk and on the Shores of the Lake Baikal

Directory of Open Access Journals (Sweden)

M.A. Zhivetiev

2014-12-01

Full Text Available We study leafs of five plant species, growing in Irkutsk city and on the southeastern shore of Lake Baikal. These species are Achillea asiatica Serg., Taraxacum officinale Wigg., Plantago major L., Veronica chamaedrys L. and Alchemilla subcrenata Buser. In its leafs we identify some types of stress-induced proteins. In autumn, the accumulation of stress proteins in leafs of plants both from shores of Lake Baikal and from Irkutsk have been registered.

[The highest proportion of tobacco materials in the blend analysis using PPF projection method for the near-infrared spectrum and Monte Carlo method].

Science.gov (United States)

Mi, Jin-Rui; Ma, Xiang; Zhang, Ya-Juan; Wang, Yi; Wen, Ya-Dong; Zhao, Long-Lian; Li, Jun-Hui; Zhang, Lu-Da

2011-04-01

The present paper builds a model based on Monte Carlo method in the projection of the blending tobacco. This model is made up of two parts: the projecting points of tobacco materials, whose coordinates are calculated by means of the PPF (projection based on principal component and Fisher criterion) projection method for the tobacco near-infrared spectrum; and the point of tobacco blend, which is produced by linear additive to the projecting point coordinates of tobacco materials. In order to analyze the projection points deviation from initial state levels, Monte Carlo method is introduced to simulate the differences and changes of raw material projection. The results indicate that there are two major factors affecting the relative deviation: the highest proportion of tobacco materials in the blend, which is too high to make the deviation under control; and the quantity of materials, which is so small to control the deviation. The conclusion is close to the principle of actual formulating designing, particularly, the more in the quantity while the lower in proportion of each. Finally the paper figures out the upper limit of the proportions in the different quantity of materials by theory. It also has important reference value for other agricultural products blend.

Shored gunshot wound of exit. A phenomenon with identity crisis.

Science.gov (United States)

Aguilar, J C

1983-09-01

Shored gunshot wound of exit is produced when the outstretched skin is impaled, sandwiched, and crushed between the outgoing bullet and the unyielding object over the exit site, thus leaving an abrasion collar on the wound margin. Proper coaptation of the wound margin is impossible because of the loss of skin just like those observed in entrance wounds. In contrast to the entrance wound, the supported exit wound shows a scalloped or punched-out abrasion collar and sharply contoured skin in between the radiating skin lacerations marginating the abrasion (Fig. 1). Should gunpowder be observed around the exit site, it is often unevenly distributed, and is not associated with searing, gunpowder stippled abrasion, tatooing, and deposition of soot.

The hyperspectral imaging trade-off

DEFF Research Database (Denmark)

Carstensen, Jens Michael

, this will be the standard situation, and it enables the detection of small spectral features like peaks, valleys and shoulders for a wide range of chemistries. Everything else being equal this is what you would wish for, and hyperspectral imaging is often used in research and in remote sensing because of the needs and cost......Although it has no clear-cut definition, hyperspectral imaging in the UV-Visible-NIR wavelength region seems to mean spectral image sampling in bands from 10 nm width or narrower that enables spectral reconstruction over some wavelength interval. For non-imaging spectral applications...... structures in these projects. However, hyperspectral imaging is a sampling choice within spectral imaging that typically will impose some trade-offs, and these trade-offs will not be optimal for many applications. The purpose of this presentation is to point out and increase the awareness of these trade...

Offshoring in the automobile ancillary sector. Who competes with its production plants?; Deslocalizacion en el sector auxiliar del automovil. Con quien compite su planta de produccion?

Energy Technology Data Exchange (ETDEWEB)

Lampon, J. F.; Vazquez, X. H.; Garcia-Vazquez, J. M.

2010-07-01

The paper addresses the causes of off shoring in the Spanish car industry. It compares the internal rivalry between European subsidiaries of the same multinational with the external rivalry stemming from other competitors located in Spain. Our analysis shows two important results: firstly, that productivity is more important than profitability in off shoring decisions; and second, that these differences are more evident for internal rivalry than for external rivalry. (Author) 21 refs.

Osseous skeletal material and fish scales in marine sediments under the oxygen minimum zone off northern and central Chile

Science.gov (United States)

Milessi, Andrés C.; Sellanes, Javier; Gallardo, Víctor A.; Lange, Carina B.

2005-08-01

The significance of whale falls for the study of the biogeography, evolution and biodiversity of deep-sea biota has been recently recognized by international programs since large carcasses are known to give rise to biogenic chemosynthetic ecosystems. However, the plain accumulation of smaller bone material in the shallower settings of the continental shelf and upper slope under the hypoxic conditions of the Oxygen Minimum Zone (OMZ), has received much less attention. Here we describe new findings of skeletal material and fish scales in marine sediments under the OMZ off northern and central Chile which, combined with previous reports for the study area, lead us to suggest the existence of a band in the benthos of accumulation of bones and scales extending at least twenty degrees in latitude (18-38° S). Future studies should focus on the characterization of biotic communities living upon these resources in order to elucidate their peculiarities and importance in the Eastern South Pacific.

Preliminary sensitivity analyses of corrosion models for BWIP [Basalt Waste Isolation Project] container materials

International Nuclear Information System (INIS)

Anantatmula, R.P.

1984-01-01

A preliminary sensitivity analysis was performed for the corrosion models developed for Basalt Waste Isolation Project container materials. The models describe corrosion behavior of the candidate container materials (low carbon steel and Fe9Cr1Mo), in various environments that are expected in the vicinity of the waste package, by separate equations. The present sensitivity analysis yields an uncertainty in total uniform corrosion on the basis of assumed uncertainties in the parameters comprising the corrosion equations. Based on the sample scenario and the preliminary corrosion models, the uncertainty in total uniform corrosion of low carbon steel and Fe9Cr1Mo for the 1000 yr containment period are 20% and 15%, respectively. For containment periods ≥ 1000 yr, the uncertainty in corrosion during the post-closure aqueous periods controls the uncertainty in total uniform corrosion for both low carbon steel and Fe9Cr1Mo. The key parameters controlling the corrosion behavior of candidate container materials are temperature, radiation, groundwater species, etc. Tests are planned in the Basalt Waste Isolation Project containment materials test program to determine in detail the sensitivity of corrosion to these parameters. We also plan to expand the sensitivity analysis to include sensitivity coefficients and other parameters in future studies. 6 refs., 3 figs., 9 tabs

Off-peak delivery : a pilot project for the Chicago region : final report.

Science.gov (United States)

2015-08-25

Off-peak delivery (OPD) is a simple concept, but it can be challenging to implement because the benefits and costs are not always evenly distributed. Carries generally like the idea because it can save them time and money, but receiving businesses of...

First GB records of the invasive Asian shore crab, Hemigrapsus sanguineus from Glamorgan, Wales and Kent, England.

OpenAIRE

Seeley, B; Sewell, J; Clark, PF

2015-01-01

The present contribution reports on the capture of two adult male specimens of the Asian/Japanese shore crab, Hemigrapsus sanguineus (de Haan, 1835) from Glamorgan, south Wales and Kent, southern England. These represent the first records of this species from mainland Great Britain.

Carbon dioxide cleaning pilot project

International Nuclear Information System (INIS)

Knight, L.; Blackman, T.E.

1994-01-01

In 1989, radioactive-contaminated metal at the Rocky Flats Plant (RFP) was cleaned using a solvent paint stripper (Methylene chloride). One-third of the radioactive material was able to be recycled; two-thirds went to the scrap pile as low-level mixed waste. In addition, waste solvent solutions also required disposal. Not only was this an inefficient process, it was later prohibited by the Resource Conservation and Recovery Act (RCRA), 40 CFR 268. A better way of doing business was needed. In the search for a solution to this situation, it was decided to study the advantages of using a new technology - pelletized carbon dioxide cleaning. A proof of principle demonstration occurred in December 1990 to test whether such a system could clean radioactive-contaminated metal. The proof of principle demonstration was expanded in June 1992 with a pilot project. The purpose of the pilot project was three fold: (1) to clean metal so that it can satisfy free release criteria for residual radioactive contamination at the Rocky Flats Plant (RFP); (2) to compare two different carbon dioxide cleaning systems; and (3) to determine the cost-effectiveness of decontamination process in a production situation and compare the cost of shipping the metal off site for waste disposal. The pilot project was completed in August 1993. The results of the pilot project were: (1) 90% of those items which were decontaminated, successfully met the free release criteria , (2) the Alpheus Model 250 was selected to be used on plantsite and (3) the break even cost of decontaminating the metal vs shipping the contaminated material offsite for disposal was a cleaning rate of 90 pounds per hour, which was easily achieved

Environmental trade-offs of tunnels vs cut-and-cover subways

Science.gov (United States)

Walton, M.

1978-01-01

Heavy construction projects in cities entail two kinds of cost - internal cost, which can be defined in terms of payments from one set of parties to another, and external cost, which is the cost borne by the community at large as the result of disutilities entailed in construction and operation. Environmental trade-offs involve external costs, which are commonly difficult to measure. Cut-and-cover subway construction probably entails higher external and internal cost than deep tunnel construction in many urban geological environments, but uncertainty concerning the costs and environmental trade-offs of tunneling leads to limited and timid use of tunneling by American designers. Thus uncertainty becomes a major trade-off which works against tunneling. The reverse is true in Sweden after nearly 30 years of subway construction. Econometric methods for measuring external costs exist in principle, but are limited in application. Economic theory based on market pressure does not address the real problem of urban environmental trade-offs. Nevertheless, the problem of uncertainty can be addressed by comparative studies of estimated and as-built costs of cut-and-cover vs tunnel projects and a review of environmental issues associated with such construction. Such a study would benefit the underground construction industry and the design of transportation systems. It would also help solve an aspect of the urban problem. ?? 1978.

Reconstructing Holocene shore displacement and Stone Age palaeogeography from a foredune sequence on Ruhnu Island, Gulf of Riga, Baltic Sea

Science.gov (United States)

Muru, Merle; Rosentau, Alar; Preusser, Frank; Plado, Jüri; Sibul, Ivo; Jõeleht, Argo; Bjursäter, Stefan; Aunap, Raivo; Kriiska, Aivar

2018-02-01

Holocene shore displacement and the palaeogeography of Late Mesolithic and Late Neolithic settlements on Ruhnu Island, Gulf of Riga, were reconstructed using foredune sequence luminescence dating, sedimentological data supported by ground-penetrating radar analysis, and GIS-based landscape modelling. The foredune ridges consist of very well to well sorted fine- to medium-grained aeolian sand and are underlain by seaward dipping foreshore sediments. The studied sequence of 38 ridges was formed between 6.91 ± 0.58 ka and 2.54 ± 0.19 ka ago, and represents a period of falling relative sea level. Foredune plain progradation, with average rates of 0.3-0.6 m per year, was controlled by isostatic land uplift, which caused a continuous withdrawal of shorelines to lower elevations. The dated foredune succession was used to reconstruct the coastal palaeogeography of the island. Palaeogeographical reconstructions show that during two phases of Late Mesolithic habitation, at ca. 7.2 cal. ka BP and 6.2 cal. ka BP, seal hunters settled the coastal zone of Ruhnu Island. Based on tool material and pottery type they could have originated from Saaremaa Island, which according to palaeoreconstruction of the Gulf of Riga, was located approximately 70 km northwest of Ruhnu Island during the Late Mesolithic. Later signs of human occupation, radiocarbon dated to ca. 4.7 cal. ka BP, were from the centre of the island, hundreds of metres away from the shore at about 8 m above its contemporary sea level. This Late Neolithic habitation shows a clearly different pattern than earlier coastal settlement, and suggests a shift in subsistence strategy towards agriculture and animal husbandry.

General and special engineering materials science. Vol. 1

International Nuclear Information System (INIS)

Ondracek, G.; Voehringer, O.

1983-04-01

The present report about general and special engineering materials science is the result of lectures given by the authors in two terms in 1982 at Instituto Balseiro, San Carlos de Bariloche, the graduated college of the Universidad de Cuyo and Comision Nacional de Energia Atomica, Republica Argentina. These lectures were organised in the frame of the project ''nuclear engineering'' (ARG/78/020) of the United Nations Development Program (UNDP) by the International Atomic Energy Agency (IAEA). Some chapters of the report are written in English, others in Spanish. The report is subdivided into three volumes: Volume I treats general engineering materials science in 4 capital chapters on the structure of materials, the properties of materials, materials technology and materials testing and investigation supplemented by a selected detailed chapter about elasticity plasticity and rupture mechanics. Volume II concerns special engineering materials science with respect to nuclear materials under normal reactor operation conditions including reactor clad and structural materials, nuclear fuels and fuel elements and nuclear waste as a materials viewpoint. Volume III - also concerning special engineering materials science - considers nuclear materials with respect to off-normal (''accident'') reactor operation conditions including nuclear materials in loss-of-coolant accidents and nuclear materials in core melt accidents. (orig.) [de

Guidelines for Automation Project Execution

OpenAIRE

Takkinen, Heidi

2011-01-01

The purpose of this Master’s thesis was to create instructions for executing an automation project. Sarlin Oy Ab needed directions on how to execute an automation project. Sarlin is starting up a new business area offering total project solutions for customers. Sarlin focuses on small and minor automation projects on domestic markets. The thesis represents issues related to project execution starting from the theory of the project to its kick-off and termination. Site work is one importan...

Opportunities for peak shaving the energy demand of ship-to-shore quay cranes at container terminals

NARCIS (Netherlands)

H. Geerlings; Robert Heij; dr. J.H.R. van Duin

2018-01-01

This paper presents the results of both a qualitative and a quantitative study on the possibilities for peak shaving the energy demand of ship-to-shore (STS) cranes at container terminals. The objective is to present an energy consumption model that visualizes the energy demand of STS cranes and to

Opportunities for peak shaving the energy demand of ship-to-shore quay cranes at container terminals

NARCIS (Netherlands)

Geerlings, Harry; van Duin, Ron

2018-01-01

This paper presents the results of both a qualitative and a quantitative study on
the possibilities for peak shaving the energy demand of ship-to-shore (STS) cranes at container terminals. The objective is to present an energy consumption model that visualizes the energy demand of STS cranes and

A buffer material optimal design in the radioactive wastes geological disposal using the satisficing trade-off method and the self-organizing map

International Nuclear Information System (INIS)

Okamoto, Takashi; Hanaoka, Yuya; Aiyoshi, Eitaro; Kobayashi, Yoko

2012-01-01

In this paper, we consider a multi-objective optimization method in order to obtain a preferred solution for the buffer material optimal design problem in the high-level radioactive wastes geological disposal. The buffer material optimal design problem is formulated as a constrained multi-objective optimization problem. Its Pareto optimal solutions are distributed evenly on whole bounds of the feasible region. Hence, we develop a search method to find a preferred solution easily for a decision maker from the Pareto optimal solutions which are distributed evenly and vastly. In the preferred solution search method, the visualization technique of a Pareto optimal solution set using the self-organizing map is introduced into the satisficing trade-off method which is the interactive method to obtain a Pareto optimal solution that satisfies a decision maker. We confirm the effectiveness of the preferred solution search method in the buffer material optimal design problem. (author)

Ontogenetic scaling of the olfactory antennae and flicking behavior of the shore crab, Hemigrapsus oregonensis.

Science.gov (United States)

Waldrop, Lindsay D

2013-07-01

Malacostracan crustaceans such as crabs flick antennae with arrays of olfactory sensilla called aesthetascs through the water to sense odors. Flicking by crabs consists of a quick downstroke, in which aesthetascs are deflected laterally (splayed), and a slower, reversed return stroke, in which aesthetascs clump together. This motion causes water to be flushed within and then held in between aesthetascs to deliver odor molecules to olfactory receptors. Although this odor sampling method relies on a narrow range of speeds, sizes, and specific arrangements of aesthetascs, most crabs dramatically change these during ontogeny. In this study, the morphometrics of the aesthetascs, array, and antennae and the flicking kinematics of the Oregon shore crab, Hemigrapsus oregonensis (Decapoda: Brachyura), are examined to determine their scaling relationships during ontogeny. The morphometrics of the array and antennae increase more slowly than would be predicted by isometry. Juvenile crabs' aesthetascs splay relatively further apart than adults, likely due to changing material properties of aesthetasc cuticle during growth. These results suggest that disproportionate growth and altered aesthetasc splay during flicking will mediate the size changes due to growth that would otherwise lead to a loss of function.