Status of GT-MHR with emphasis on the power conversion system

International Nuclear Information System (INIS)

Neylan, A.J.; Silady, F.A.; Kohler, B.P.; Lomba, D.; Rose, R.

1996-01-01

The conceptual design of the Gas Turbine-Modular Helium Reactor (GT-MHR) has made significant progress in the past year. Evaluation of an external versus internal (submerged) generator and modifications as a result of an internal seal task force were completed. Significant progress was also made on the design of the generator utilizing existing technology. Conceptual design of the turbocompressor was confirmed, including extensive evaluation of the entire turbomachine (turbocompressor and generator) rotor dynamics. Results concluded in a revised configuration for the location of magnetic bearings supporting the entire machine. Integration of the turbomachine with the recuperator, precooler, intercooler and internal ducts and seals progressed to improved maintenance and operation. This resulted in some changes and improvements in the overall arrangement of the power conversion module. The paper also provides a summary of the fuel and safety assessment progress. (author). 6 refs, 7 figs, 3 tabs

Deep-Burn MHR Neutronic Analysis with a SiC-Gettered TRU Kernel

International Nuclear Information System (INIS)

Jo, Chang Keun; Noh, Jae Man; Kim, Yong Hee; Venneric, F.

2010-01-01

This paper is focused on the nuclear core design of a DB-MHR (Deep Burn-Modular Helium Reactor) core loaded with a SiC-gettered TRU fuel. The SiC oxygen getter is added to reduce the CO pressure in the buffer zone of TRISO. In the paper, the cycle length, reactivity swing, discharged burnup, and the burning rate of plutonium were calculated for the DB-MHR. Also, impacts of uranium addition to the TRU kernel were investigated. Recently, the decay heat of TRU fueled DB core was found to be highly dependent on the TRU loading: the higher the loading, the higher the decay heat. The high decay heat of TRU fuel may lead to unacceptably high peak fuel temperature during an LPCC (Low Pressure Conduction Cooling) accident. Thus, we tried to minimize the decay heat of the core for a minimal peak fuel temperature during LPCC

Analysis of triso packing fraction and fissile material to DB-MHR using LWR reprocessed fuel

International Nuclear Information System (INIS)

Silva, Clarysson A.M. da; Pereira, Claubia; Costa, Antonella L.; Veloso, Maria Auxiliadora F.; Gual, Maritza R.

2013-01-01

Gas-cooled and graphite-moderated reactor is being considered the next generation of nuclear power plants because of its characteristic to operate with reprocessed fuel. The typical fuel element consists of a hexagonal block with coolant and fuel channels. The fuel pin is manufactured into compacted ceramic-coated particles (TRISO) which are used to achieve both a high burnup and a high degree of passive safety. This work uses the MCNPX 2.6.0 to simulate the active core of Deep Burn Modular Helium Reactor (DB-MHR) employing PWR (Pressurized Water Reactor) reprocessed fuel. However, before a complete study of DB-MHR fuel cycle and recharge, it is necessary to evaluate the neutronic parameters to some values of TRISO Packing Fractions (PF) and Fissile Material (FM). Each PF and FM combination would generate the best behaviour of neutronic parameters. Therefore, this study configures several PF and FM combinations considering the heterogeneity of TRISO layers and lattice. The results present the best combination of PF and FM values according with the more appropriated behaviour of the neutronic parameters during the burnup. In this way, the optimized combination can be used to future works of MHR fuel cycle and recharge. (author)

Rotor scale model tests for power conversion unit of GT-MHR

Energy Technology Data Exchange (ETDEWEB)

Baxi, C.B.; Daugherty, R.; Shenoy, A. [General Atomics, 3550 General Atomics Court, CA (United States); Kodochigov, N.G.; Belov, S.E. [Experimental Design Bureau of Machine Building, N. Novgorad, RF (United States)

2007-07-01

The gas-turbine modular helium reactor (GT-MHR) combines a modular high-temperature gas-cooled reactor with a closed Brayton gas-turbine cycle power conversion unit (PCU) for thermal to electric energy conversion. The PCU has a vertical orientation and is supported on electromagnetic bearings (EMB). The Rotor Scale Model (RSM) Tests are intended to model directly the control of EMB and rotor-dynamic characteristics of the full-scale GT-MHR Turbo-machine. The objectives of the RSM tests are to: -1) confirm the EMB control system design for the GT-MHR turbo-machine over the full-range of operation, -2) confirm the redundancy and on-line maintainability features that have been specified for the EMBs, -3) provide a benchmark for validation of analytical tools that will be used for independent analyses of the EMB subsystem design, -4) provide experience with the installation, operation and maintenance of EMBs supporting multiple rotors with flexible couplings. As with the full-scale turbo-machine, the RSM will incorporate two rotors that are joined by a flexible coupling. Each of the rotors will be supported on one axial and two radial EMBs. Additional devices, similar in concept to radial EMBs, will be installed to simulate magnetic and/or mechanical forces representing those that would be seen by the exciter, generator, compressors and turbine. Overall, the length of the RSM rotor is about 1/3 that of the full-scale turbo-machine, while the diameter is approximately 1/5 scale. The design and sizing of the rotor is such that the number of critical speeds in the RSM are the same as in the full-scale turbo-machine. The EMBs will also be designed such that their response to rotor-dynamic forces is representative of the full-scale turbo-machine. (authors)

Models development for the fuel design of a reactor GT-MHR

International Nuclear Information System (INIS)

Telesforo R, D.; Francois L, J. L.

2009-10-01

The very high temperature reactor (VHTR) it as arisen as an option for the following reactors generation, due to their characteristics as they are inherent security, modularity and relative low cost. One of the VHTR variants, for its fuel based on prismatic blocks, is the modular reactor cooled by gas GT-MHR that uses a fuel particle of multiple layers called TRISO. These particles are small containers with fuel in their interior and they function as small pressure vessels that retain the fission products. They are absorbed inconstant ing in a cylindrical graphite matrix to form the fuel named Compact; the quantity of fuel inventory is proportional to the packaging fraction on the total volume of the Compact. The reactor consists of a matrix of 12 X 12 graphite hexagonal assemblies contained in a cylinder of 3.5 radio meters and 10.0 meters high. The nucleus has ten axial regions with 36 X 3 fuel assemblies distributed in three rings. For the neutronic modeling of the fuel and the nucleus it was employee the Monte Carlo method, using the code MCNPX (Monte Carlo N-Particle version X) that is a transport code of general purposes that uses this method with a great versatility in the representation of arbitrary three-dimensional configurations and materials configuration. The heterogeneous model of the reactor GT-MHR core was obtained, adjusting the relative parameters at core prototype GT-MHR presented by General Atomics. To prove the model it was employee the fuel formed by TRISO particles, with a nucleus of 150 μm and packaging fraction of 37.55%, with a Uranium-235 mixture, as fissile nuclide, and Thorium-232. To create a simplified model of the nucleus, or homogeneous model, without modeling any particle, it was employee the reactivity-equivalent physical transformation method that captures the effects of the heterogeneity double of the fuel region in two homogeneous equivalent cells, being obtained very good results. (Author)

Rotor scale model tests for power conversion unit of GT-MHR

Energy Technology Data Exchange (ETDEWEB)

Baxi, C.B., E-mail: baxicb1130@hotmail.com [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Telengator, A.; Razvi, J. [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States)

2012-10-15

The gas turbine modular helium reactor (GT-MHR) combines a modular high-temperature gas-cooled reactor (HTGR) nuclear heat source with a closed Brayton gas-turbine cycle power conversion unit (PCU) for thermal to electric energy conversion. The PCU has a vertical orientation and is supported on electromagnetic bearings (EMB). The rotor scale model (RSM) tests are intended to directly model the control of EMB and rotor dynamic characteristics of the full-scale GT-MHR turbo-machine (TM). The objectives of the RSM tests are to: Bullet Confirm the EMB control system design for the GT-MHR turbo machine over the full-range of operation. Bullet Confirm the redundancy and on-line maintainability features that have been specified for the EMBs. Bullet Provide a benchmark for validation of analytical tools that will be used for independent analyses of the EMB subsystem design. Bullet Provide experience with the installation, operation and maintenance of EMBs supporting multiple rotors with flexible couplings. As with the full-scale TM, the RSM incorporates two rotors that are joined by a flexible coupling. Each of the rotors is supported on one axial and two radial EMBs. Additional devices, similar in concept to radial EMBs, are installed to simulate magnetic and/or mechanical forces representing those that would be seen by the exciter, generator, compressors and turbine. Overall, the lengths of the RSM rotor is about 1/3rd that of the full-scale TM, while the diameters are approximately 1/5th scale. The design and sizing of the rotor is such that the number and values of critical speeds in the RSM are the same as in the full-scale TM. The EMBs are designed such that their response to rotor dynamic forces is representative of the full-scale TM. The fabrication and assembly of the RSM was completed at the end of 2008. All start up adjustments were finished in December 2009. To-date the generator rotor has been supported in the EMBs and rotated up to 1800 rpm. Final tests are

Benchmark calculation for GT-MHR using HELIOS/MASTER code package and MCNP

International Nuclear Information System (INIS)

Lee, Kyung Hoon; Kim, Kang Seog; Noh, Jae Man; Song, Jae Seung; Zee, Sung Quun

2005-01-01

The latest research associated with the very high temperature gas-cooled reactor (VHTR) is focused on the verification of a system performance and safety under operating conditions for the VHTRs. As a part of those, an international gas-cooled reactor program initiated by IAEA is going on. The key objectives of this program are the validation of analytical computer codes and the evaluation of benchmark models for the projected and actual VHTRs. New reactor physics analysis procedure for the prismatic VHTR is under development by adopting the conventional two-step procedure. In this procedure, a few group constants are generated through the transport lattice calculations using the HELIOS code, and the core physics analysis is performed by the 3-dimensional nodal diffusion code MASTER. We evaluated the performance of the HELIOS/MASTER code package through the benchmark calculations related to the GT-MHR (Gas Turbine-Modular Helium Reactor) to dispose weapon plutonium. In parallel, MCNP is employed as a reference code to verify the results of the HELIOS/MASTER procedure

A study on the design concepts of the PBMR and the GT-MHR

International Nuclear Information System (INIS)

Park, Won Seok; Chang, Jong Hwa; Park, Chang Kue

2004-05-01

The major application of the nuclear power in the energy sector has been to produce the electricity. However, a growing concern on the environment and the expected shortage of the fossil energy resources is demanding the expansion of nuclear energy's role in the energy sectors. The High Temperature Gas cooled Reactor (HTGR) has been expected to expand the role of nuclear energy because of its high temperature capability. Especially, the interest on the HTGR has been sharply increased recently related with the production of the hydrogen. About 5 HTGRs had been operated by the end of 1980s. However, all of them had been terminated permanently at the end of 1980s because of their poor system economy and frequent technical troubles. A new concept called MHTGR (Modular High Temperature Gas cooled Reactor) emerged in early of 1990s. Two MHTGR concepts on commercial basis have been developed since then; one is the PBMR (Pebble Bed Modular Reactor) developed by Eskom in South Africa and another is GT-MHR (Gas Turbine Modular High-temperature Reactor) developed by both GA in USA and OKBM in Russia. In this report, the design concepts for the PBMR and GT-MHR were reviewed

FSV experience in support of the GT-MHR reactor physics, fuel performance, and graphite

International Nuclear Information System (INIS)

Baxter, A.M.; McEachern, D.; Hanson, D.L.; Vollman, R.E.

1994-11-01

The Fort St. Vrain (FSV) power plant was the most recent operating graphite-moderated, helium-cooled nuclear power plant in the United States. Many similarities exist between the FSV design and the current design of the GT-MHR. Both designs use graphite as the basic building blocks of the core, as structural material, in the reflectors, and as a neutron moderator. Both designs use hexagonal fuel elements containing cylindrical fuel rods with coated fuel particles. Helium is the coolant and the power densities vary by less than 5%. Since material and geometric properties of the GT-MHR core am very similar to the FSV core, it is logical to draw upon the FSV experience in support of the GT-MHR design. In the Physics area, testing at FSV during the first three cycles of operation has confirmed that the calculational models used for the core design were very successful in predicting the core nuclear performance from initial cold criticality through power operation and refueling. There was excellent agreement between predicted and measured initial core criticality and control rod positions during startup. Measured axial flux distributions were within 5% of the predicted value at the peak. The isothermal temperature coefficient at zero power was in agreement within 3%, and even the calculated temperature defect over the whole operating range for cycle 3 was within 8% of the measured defect. In the Fuel Performance area, fuel particle coating performance, and fission gas release predictions and an overall plateout analysis were performed for decommissioning purposes. A comparison between predicted and measured fission gas release histories of Kr-85m and Xe-138 and a similar comparison with specific circulator plateout data indicated good agreement between prediction and measured data. Only I-131 plateout data was overpredicted, while Cs-137 data was underpredicted

GT-MHR COMMERCIALZATION STUDY. TECHNICAL PROGRESS AND COST MANAGEMENT REPORT FOR THE PERIOD JUNE 1 THROUGH JUNE 30, 2003

International Nuclear Information System (INIS)

SHENOY, A.S.

2003-01-01

A271 GT-MHR COMMERCIALZATION STUDY TECHNICAL PROGRESS AND COST MANAGEMENT REPORT FOR THE PERIOD JUNE 1 THROUGH JUNE 30, 2003. Petten was provided with irradiation dimensional change data for both fuel compacts and H-451 graphite for design of the graphite sleeves that hold the fuel compacts to be irradiated in HFR-EU2. The Fuel Sample Product Specification for the Fuel Performance Irradiation Test Capsule MHR-2 was completed and approved. A Work Breakdown Structure was prepared for the development and qualification of advanced coated-particle fuels capable of meeting anticipated fuel performance requirements and work was initiated on preparation of schedules and a cost estimates for the test matrices

A study on the design concepts of the PBMR and the GT-MHR

Energy Technology Data Exchange (ETDEWEB)

Park, Won Seok; Chang, Jong Hwa; Park, Chang Kue

2004-05-01

The major application of the nuclear power in the energy sector has been to produce the electricity. However, a growing concern on the environment and the expected shortage of the fossil energy resources is demanding the expansion of nuclear energy's role in the energy sectors. The High Temperature Gas cooled Reactor (HTGR) has been expected to expand the role of nuclear energy because of its high temperature capability. Especially, the interest on the HTGR has been sharply increased recently related with the production of the hydrogen. About 5 HTGRs had been operated by the end of 1980s. However, all of them had been terminated permanently at the end of 1980s because of their poor system economy and frequent technical troubles. A new concept called MHTGR (Modular High Temperature Gas cooled Reactor) emerged in early of 1990s. Two MHTGR concepts on commercial basis have been developed since then; one is the PBMR (Pebble Bed Modular Reactor) developed by Eskom in South Africa and another is GT-MHR (Gas Turbine Modular High-temperature Reactor) developed by both GA in USA and OKBM in Russia. In this report, the design concepts for the PBMR and GT-MHR were reviewed.

GT-MHR COMMERCIALZATION STUDY. TECHNICAL PROGRESS AND COST MANAGEMENT REPORT FOR THE PERIOD MAY 1 THROUGH MAY 31, 2003

International Nuclear Information System (INIS)

SHENOY, A.S.

2003-01-01

A271 GT-MHR COMMERCIALZATION STUDY TECHNICAL PROGRESS AND COST MANAGEMENT REPORT FOR THE PERIOD MAY 1 THROUGH MAY 31, 2003. Petten advised GA the start of the HFR-EU2 irradiation is being delayed until late July 2004. HFR-EU1 (pebble fuel) is also delayed until February/March 2004. The reason for the delays was implementation of new financial regulations at Petten that delayed the contracts for capsule fabrication. Review of the MHR-2 Fuel Product Specification was completed. Revision of the specification to incorporate the review results is in progress. Detailed test matrices have been drafted for capsule irradiation tests and for post-irradiation heating tests proposed for development and qualification of advanced coated-particle fuels capable of meeting anticipated VHTR fuel performance requirements

The GT-MHR - clear, economic, and safe power for the Pacific Rim

International Nuclear Information System (INIS)

Blue, L.S.; Etzel, K.T.; Simon, W.A.; Wistrom, J.D.

1994-01-01

In recent decades the nations of the Pacific Rim have outpaced the rest of the world in economic growth. Beyond an abundant labor market and the region's natural resources, energy has played a pivotal role in fuelling this boom. The diverse sources of this energy largely reflect the naturally occurring fuel assets in the Rim countries. Only in the countries where these resources are less plentiful has nuclear energy become a significant sources of electric power generation. Persuasive as the argument for non-polluting power may be by itself it does not sell the nuclear energy option. In addition to being clean it must also be economically competitive and very safe. The authors claim that the Gas-Turbine Modular Helium Reactor (GT-MHR) is an advances nuclear power system that addresses the issues, and should be viewed as an attractive candidate to meet future energy needs. The GT-MHR derives from the coupling of a small, passively safe, modular reactor directly with a compact power conversion module. It uses the Brayton cycle to produce electricity directly with the primary helium coolant driving the turbine-generator. Thus, it shows promise for a quantum reduction in power generation costs by increasing plant efficiency to a remarkable 48% This paper highlights the advantages of the fact that the design is based on proven technology, and offers a clean, economic and safe energy for electricity and high temperature process heat. 2 refs., 4 figs

Helium turbomachine design for GT-MHR power plant

International Nuclear Information System (INIS)

McDonald, C.F.; Orlando, R.J.

1994-07-01

The power conversion system in the gas turbine modular helium reactor (GT-MHR) power plant is based on a highly recuperated closed Brayton cycle. The major component in the direct cycle system is a helium closed-cycle gas turbine rated at 286 MW(e). The rotating group consists of an intercooled helium turbocompressor coupled to a synchronous generator. The vertical rotating assembly is installed in a steel vessel, together with the other major components (i.e., recuperator, precooler, intercooler, and connecting ducts and support structures). The rotor is supported on an active magnetic bearing system. The turbine operates directly on the reactor helium coolant, and with a temperature of 850 degree C (1562 degree F) the plant efficiency is over 47%. This paper addresses the design and development planning of the helium turbomachine, and emphasizes that with the utilization of proven technology, this second generation nuclear power plant could be in service in the first decade of the 21st century

The gas turbine-modular helium reactor (GT-MHR), high efficiency, cost competitive, nuclear energy for the next century

International Nuclear Information System (INIS)

Zgliczynski, J.B.; Silady, F.A.; Neylan, A.J.

1994-04-01

The Gas Turbine-Modular Helium Reactor (GT-MHR) is the result of coupling the evolution of a small passively safe reactor with key technology developments in the US during the last decade: large industrial gas turbines, large active magnetic bearings, and compact, highly effective plate-fin heat exchangers. The GT-MHR is the only reactor concept which provides a step increase in economic performance combined with increased safety. This is accomplished through its unique utilization of the Brayton cycle to produce electricity directly with the high temperature helium primary coolant from the reactor directly driving the gas turbine electrical generator. This cannot be accomplished with another reactor concept. It retains the high levels of passive safety and the standardized modular design of the steam cycle MHTGR, while showing promise for a significant reduction in power generating costs by increasing plant net efficiency to a remarkable 47%

Studies of a deep burn fuel cycle for the incineration of military plutonium in the GT-MHR using the Monte-Carlo burnup code

International Nuclear Information System (INIS)

Talamo, A.; Gudowski, W.

2004-01-01

The deep burn fuel cycle for the incineration of military plutonium in the GT-MHR is studied using the Monte-Carlo burnup code. The irradiation is DF is so rich in fissile isotopes that the TF cannot guarantee a negative reactive feedback, and the presence of erbium as burnable poison is absolutely necessary for the reactivity safety reasons. At beginning of life (BOL) the fuel composed of DF, consisting of fresh military plutonium, after an irradiation period of three years the fuel is reprocessed into post driver fuel (PDF). The mass flow of the GT-MHR fuelled by military plutonium at the equilibrium of the fuel composition shows that 66% of 239 Pu is burned in three years and 92% in six years. (authors)

Alleviation of heavy metal toxicity and phytostimulation of Brassica campestris L. by endophytic Mucor sp. MHR-7.

Science.gov (United States)

Zahoor, Mahwish; Irshad, Muhammad; Rahman, Hazir; Qasim, Muhammad; Afridi, Sahib Gul; Qadir, Muhammad; Hussain, Anwar

2017-08-01

Heavy metal (HM) pollution is of great concern in countries like Pakistan where a huge proportion of human population is exposed to it. These toxic metals are making their way from water bodies to soil where it not only interferes with plant growth and development but also initiates serious health issues in human consuming the produce of such soils. Bioremediation is one of the most viable and efficient solution for the problem. Purpose of the current study was to isolate endophytic fungi from plants grown on HM contaminated soil and screen them for their ability to tolerate multiple HM including chromium (Cr 6+ ), manganese (Mn 2+ ), cobalt (Co 2+ ), copper (Cu 2+ ) and zinc (Zn 2+ ). Out of 27 isolated endophytes, only one strain (MHR-7) was selected for multiple heavy metals tolerance. The strain was identified as Mucor sp. by 18S and 28S ribosomal RNA internal transcribed spacer (ITS) 1 and 4 sequence homology. The strain effectively tolerated up to 900µgmL -1 of these heavy metals showing no remarkable effect on its growth. The adverse effect of the heavy metals, measured as reduction of the fungal growth increased with increasing concentration of the metals. The strain was able to remove 60-87% of heavy metals from broth culture when supplied with 300µgmL -1 of these metals. A trend of decline in bioremediation potential of the strain was observed with increasing amount of metals. The strain removed metals by biotransformation and/or accumulation of heavy metal in its hyphae. Application of Mucor sp. MHR-7 locked down HM in tis mycelium thereby making them less available to plant root reducing HM uptake and toxicity in mustard. Besides its bioremediation potential, the strain was also able to produce IAA, ACC deaminase and solubilize phosphate making it excellent phytostimulant fungus. It is concluded that MHR-7 is an excellent candidate for use as biofertilizer in fields affected with heavy metals. Copyright © 2017 Elsevier Inc. All rights reserved.

Geothermal Reservoir Technology Research Program: Abstracts of selected research projects

Energy Technology Data Exchange (ETDEWEB)

Reed, M.J. (ed.)

1993-03-01

Research projects are described in the following areas: geothermal exploration, mapping reservoir properties and reservoir monitoring, and well testing, simulation, and predicting reservoir performance. The objectives, technical approach, and project status of each project are presented. The background, research results, and future plans for each project are discussed. The names, addresses, and telephone and telefax numbers are given for the DOE program manager and the principal investigators. (MHR)

The Gas Turbine - Modular Helium Reactor: A Promising Option for Near Term Deployment

International Nuclear Information System (INIS)

LaBar, Malcolm P.

2002-01-01

The Gas Turbine - Modular Helium Reactor (GT-MHR) is an advanced nuclear power system that offers unparalleled safety, high thermal efficiency, environmental advantages, and competitive electricity generation costs. The GT-MHR module couples a gas-cooled modular helium reactor (MHR) with a high efficiency modular Brayton cycle gas turbine (GT) energy conversion system. The reactor and power conversion systems are located in a below grade concrete silo that provides protection against sabotage. The GT-MHR safety is achieved through a combination of inherent safety characteristics and design selections that take maximum advantage of the gas-cooled reactor coated particle fuel, helium coolant and graphite moderator. The GT-MHR is projected to be economically competitive with alternative electricity generation technologies due to the high operating temperature of the gas-cooled reactor, high thermal efficiency of the Brayton cycle power conversion system, high fuel burnup (>100,000 MWd/MT), and low operation and maintenance requirements. (author)

A development strategy for the business plan of Mitsubishi Small-sized High Temperature Gas-cooled Modular Reactor (MHR-50/100is)

International Nuclear Information System (INIS)

Minatsuki, Isao; Otani, Tomomi; Shimizu, Katsusuke; Mizokami, Yorikata; Oyama, Sunao; Tsukamoto, Hiroki

2014-01-01

A business plan and a new concept of Mitsubishi Small-sized High Temperature Gas-cooled Modular Reactor (MHR-50/100is) has been investigated toward a commercialization in near future by Mitsubishi Heavy Industries cooperated with Japan Atomic Energy Agency (JAEA) in Japan. The potential market of small sized reactor is expected to increase from the points of view of smaller investment, industrial use of the nuclear heat and IPP (Independent Power Producer). Especially minimization of construction unit cost including R and D and plant construction period are important issues in order to realize a business plan for them. The study includes four pertinent subject areas of (1) a market analysis, (2) a conceptual design, (3) improvement of safety design and (4) plant dynamics. In summary, the MHR-50/100 is designed to target a short construction period, competitive cost, and an inherent safety feature while applying only the verified technology of the High Temperature Engineering Test Reactor (HTTR) of JAEA or conventional technologies

A development strategy for the business plan of Mitsubishi Small-sized High Temperature Gas-cooled Modular Reactor (MHR-50/100is)

Energy Technology Data Exchange (ETDEWEB)

Minatsuki, Isao, E-mail: isao_minatsuki@mhi.co.jp [Mitsubishi Heavy Industries, Ltd., 16-5, Konan 2-Chome, Minato-ku, Tokyo (Japan); Otani, Tomomi; Shimizu, Katsusuke [Mitsubishi Heavy Industries, Ltd., 16-5, Konan 2-Chome, Minato-ku, Tokyo (Japan); Mizokami, Yorikata; Oyama, Sunao; Tsukamoto, Hiroki [Mitsubishi Heavy Industries, Ltd., 1-1 Wadasaki-cho 1-Chome, Hyogo-ku, Kobe (Japan)

2014-05-01

A business plan and a new concept of Mitsubishi Small-sized High Temperature Gas-cooled Modular Reactor (MHR-50/100is) has been investigated toward a commercialization in near future by Mitsubishi Heavy Industries cooperated with Japan Atomic Energy Agency (JAEA) in Japan. The potential market of small sized reactor is expected to increase from the points of view of smaller investment, industrial use of the nuclear heat and IPP (Independent Power Producer). Especially minimization of construction unit cost including R and D and plant construction period are important issues in order to realize a business plan for them. The study includes four pertinent subject areas of (1) a market analysis, (2) a conceptual design, (3) improvement of safety design and (4) plant dynamics. In summary, the MHR-50/100 is designed to target a short construction period, competitive cost, and an inherent safety feature while applying only the verified technology of the High Temperature Engineering Test Reactor (HTTR) of JAEA or conventional technologies.

Geothermal energy. Program summary

Energy Technology Data Exchange (ETDEWEB)

1979-06-01

Brief descriptions of geothermal projects funded through the Department of Energy during FY 1978 are presented. Each summary gives the project title, contractor name, contract number, funding level, dates, location, and name of the principal investigator, together with project highlights, which provide informaion such as objectives, strategies, and a brief project description. (MHR)

National Conference of State Legislators Geothermal Project. Final report, February 1978-September 1982

Energy Technology Data Exchange (ETDEWEB)

1982-01-01

The activities of the National Conference of State Legislatures Geothermal Project in stimulating and assessing state legislative action to encourage the efficient development of geothermal resources, including the use of ground water heat pumps, are reviewed by state. (MHR)

Urban Options Solar Greenhouse Demonstration Project. Final report

Energy Technology Data Exchange (ETDEWEB)

Cipparone, L.

1980-10-15

The following are included: the design process, construction, thermal performance, horticulture, educational activities, and future plans. Included in appendices are: greenhouse blueprints, insulating curtain details, workshop schedules, sample data forms, summary of performance calculations on the Urban Options Solar Greenhouse, data on vegetable production, publications, news articles on th Solar Greenhouse Project, and the financial statement. (MHR)

Neutronic evaluation of a fuel block of a GT-MHR using WIMSD5

International Nuclear Information System (INIS)

Silva, Clarysson Alberto Mello da; Pereira, Claubia; Costa, Antonella Lombardi; Veloso, Maria Auxiliadora Fortini

2009-01-01

The goal is to simulate a representative fuel block of a GT-MHR core to analyze the neutronic parameters behavior due the insertion of Pu isotopes and Minor Actinides (MAs) using shuffling scheme. Initially the fuel block was filled with Driver Fuel (DF), and after burned, these fuels are reprocessed and build the Transmutation Fuel (TF). After some cycles, the fuel block was filled with DF and TF fuels. The DF is a mixture of Pu and Np and the TF is a mix of Pu and MAs. The shuffled scheme was evaluated after each cycle. It was verified that neutronic parameters and isotopic composition reach equilibrium and remain within safety limits when this scheme is used. In addition, there were burnup of MAs. The WIMS code was used in the simulations and the following neutronic parameters were evaluated: infinitive multiplication factor, spectrum hardening and reactivity temperature coefficients. (author)

Effects of thermal-hydraulic feedback on burnup modeling of the deep burn modular high temperature reactor (DB-MHR)

International Nuclear Information System (INIS)

Bei, Yea; Wen, Wua; Di, Yuna; Stubbins, J.F.; Venneri, F.

2007-01-01

The Deep-Burn concept investigates the use of commercial high temperature gas-cooled reactors such as modular helium reactors (DB-MHR) to transmute spent fuel from light water reactors (LWRs). An essential feature of this technology is the fabrication of spent fuel into TRISO particles with full transuranic composition to achieve very extensive destruction levels (deep-burn) in a one-pass fuel cycle. Due to the strong temperature influence on the cross sections of transuranics, the coupling between temperature and neutronics is very important to be able to simulate realistic operations of the deep burn reactor. In this study, detailed simulations of the DB-MHR operation are performed with a Monte Carlo code system (MCNP-5 + ORIGEN-2.2 + MONTEBURNS-2 for neutronics calculations), POKE code (General Atomics, for thermohydraulics calculations) and NJOY-99 code (for processing nuclear data libraries), called MHRBURNS. Resulting power densities of fuel blocks (from neutronics calculations) are provided as input to the POKE code, which in turn, calculates new temperature distributions. The temperature distributions obtained from POKE are used to update the MCNP input, and NJOY is called to process new nuclear cross sections based on appropriate temperatures. These steps are repeated to calculate the entire burnup performance of the system. In this preliminary study only the feedback on graphite temperature is taken into account. It is observed that the temperature feedback results show a 200 K higher temperature and thus a slight difference in 237 Np and 239 Pu destruction rates, although the overall burnup rates remain the same

Solar Pilot Plant project review No. 9, May 4--5, 1977. CDRL item 10

Energy Technology Data Exchange (ETDEWEB)

None

1977-01-01

Drawings and illustrations for the project review are presented. These are included for the 10 MW(e) solar pilot plant, the collector subsystem, the receiver subsystem, the electrical power generation system and balance of plant, plant controls and transient analysis, availability and safety, pilot and commercial plant designs, and summary and recommendations. (MHR)

Evolution of the Power Conversion Unit Design of the GT-MHR

International Nuclear Information System (INIS)

Baxi, C.B.; Perez, E.; Shenoy, A.; Kostin, V.I.; Kodochigov, N.G.; Vasyaev, A.V.; Belov, S.E.; Golovko, V.F.

2006-01-01

General Atomics in the USA and Experimental Design Bureau of Machine Building (OKBM) in the Russian Federation are jointly developing a gas turbine modular helium reactor (GT-MHR). The 600 MW(t) reactor is cooled by helium at a pressure of 7 MPa. The power conversion unit (PCU) uses the reactor outlet temperature of 850 deg C in a direct Brayton cycle to achieve an efficiency of about 48%. The PCU consists of a gas turbine, a recuperator, a pre-cooler, a low-pressure compressor, an inter-cooler, and a high-pressure compressor. The turbo machine (TM), including the generator, is mounted on a single vertical shaft. The TM rotates at a speed of 4400 rpm. The asynchronous generator is connected to the turbine by a flexible coupling. The required grid frequency is achieved by a converter. All PCU components are enclosed in a single vessel. TM uses radial and axial electromagnetic bearings (EMB) for support. Catcher bearings (CB) are provided as redundant support for the TM rotor in case of EMBs failure. These design features were determined after a comprehensive study carried out over the last 10 years. This paper describes the evolution of the current PCU design and justification for the choices. (authors)

Building a Creative Ecosystem: The Young Designers on Location Project

Science.gov (United States)

Davies, Dan; Howe, Alan; Haywood, Susan

2004-01-01

This article reports on findings from a research project designed to explore ways in which creativity can be fostered through interactions between selected children, particular environments, materials, techniques and key adults. The Young Designers on Location (YDoL) project was funded by the National Endowment for Science, Technology and the Arts…

Coal Mines, Reclamation Sites - Mine Drainage Treatment/Land Recycling Project Locations

Data.gov (United States)

NSGIC Education | GIS Inventory — Mine Drainage Treatment/Land Reclamation Locations are clean-up projects that are working to eliminate some form of abandoned mine. The following sub-facility types...

Optimization of the deep-burner-modular helium reactor (DB-MHR) concept for actinide incineration

International Nuclear Information System (INIS)

Trakas, Ch.; Bruna, G.B.

2005-01-01

The paper summarizes studies performed on the General Atomics Deep-Burner Modular Helium Reactor (DB-MHR) concept-design carried out by Framatome ANP, Areva's joint subsidiary with Siemens. Feasibility and sensitivity studies as well as fuel-cycle studies with probabilistic methodology are presented. Emphasis is put on most attractive physical and computational aspects of the concept. Current investigations on design uncertainties, the future search for ways to improve the transmutation value in a double-stratum strategy, and the computational tools improvement are also presented. The Areva HTR, ANTARES, uses a similar prismatic core design. In that context, we revisited and optimized the Deep Burn concept. Typical values of transmutation ratio were established at 70%. Accounting for reactivity control needs estimated at 300 pcm, the cycle length can be estimated at 480 full-power days, giving an overall fuel irradiation time (6 fuel cycles) of about 10 calendar year, assuming as usual an average capacity factor of the plant of 80%. This study indicates a quite significant (96%) achievement for fissile material incineration. After a 500 year cooling-time, radiotoxicity (without fission products) is reduced by a factor 4

LOCATION ANALYSIS ON SMART HOUSE USING PROJECTIVE TRANSFORMATION

Directory of Open Access Journals (Sweden)

Galih Andi Pradana

2014-08-01

Full Text Available In this paper, a method of location analysis for smart house is proposed. The proposed method uses projective transformation to process the input from visual sensor for determining coordinate of resident and also the entire device inside the smart house. With a good calculated coordinate, each device function in the smart house can be optimized for the good of the resident. From the experiment results, the proposed method successfully maps all coordinates of any device in the smart house up to 81% accuracy.

Next Generation Nuclear Plant (NGNP) Prismatic HTGR Conceptual Design Project - Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Saurwein, John

2011-07-15

This report is the Final Technical Report for the Next Generation Nuclear Plant (NGNP) Prismatic HTGR Conceptual Design Project conducted by a team led by General Atomics under DOE Award DE-NE0000245. The primary overall objective of the project was to develop and document a conceptual design for the Steam Cycle Modular Helium Reactor (SC-MHR), which is the reactor concept proposed by General Atomics for the NGNP Demonstration Plant. The report summarizes the project activities over the entire funding period, compares the accomplishments with the goals and objectives of the project, and discusses the benefits of the work. The report provides complete listings of the products developed under the award and the key documents delivered to the DOE.

Next Generation Nuclear Plant (NGNP) Prismatic HTGR Conceptual Design Project - Final Technical Report

International Nuclear Information System (INIS)

Saurwein, J.

2011-01-01

This report is the Final Technical Report for the Next Generation Nuclear Plant (NGNP) Prismatic HTGR Conceptual Design Project conducted by a team led by General Atomics under DOE Award DE-NE0000245. The primary overall objective of the project was to develop and document a conceptual design for the Steam Cycle Modular Helium Reactor (SC-MHR), which is the reactor concept proposed by General Atomics for the NGNP Demonstration Plant. The report summarizes the project activities over the entire funding period, compares the accomplishments with the goals and objectives of the project, and discusses the benefits of the work. The report provides complete listings of the products developed under the award and the key documents delivered to the DOE.

SGA Project Locations

Data.gov (United States)

Vermont Center for Geographic Information — The stream geomorphic assessment is a physical assessment competed by geomorphologists to determine the condition and sensitivity of a stream. The SGA locations...

HTR-E project. High-temperature components and systems

International Nuclear Information System (INIS)

Breuil, E.; Exner, R.

2002-01-01

The HTR-E European project (four years project) is proposed for the 5th Framework Programme and concerns the technical developments needed for the innovative components of a modern HTR with a direct cycle. These components have been selected with reference to the present projects (GT-MHR, PBMR): (1) the helium turbine, the recuperator heat exchanger, the electro-magnetic bearings and the helium rotating seal; (2) the tribology. Sliding innovative components in helium environment are particularly concerned. (3) the helium purification system. Recommendations on impurities contents have to be provided in accordance with the materials proposed for the innovative components. The main outcomes expected from the HTR-E project are the design recommendations and identification of further R and D needs for these components. This will be based: (1) on experience feedback from European past helium test loops and reactors; (2) on design studies, thermal-hydraulic and structural analyses; (3) and on experimental tests

Optimal Locations for Siting Wind Energy Projects: Technical Challenges, Economics, and Public Preferences

Science.gov (United States)

Lamy, Julian V.

Increasing the percentage of wind power in the United States electricity generation mix would facilitate the transition towards a more sustainable, low-pollution, and environmentally-conscious electricity grid. However, this effort is not without cost. Wind power generation is time-variable and typically not synchronized with electricity demand (i.e., load). In addition, the highest-output wind resources are often located in remote locations, necessitating transmission investment between generation sites and load. Furthermore, negative public perceptions of wind projects could prevent widespread wind development, especially for projects close to densely-populated communities. The work presented in my dissertation seeks to understand where it's best to locate wind energy projects while considering these various factors. First, in Chapter 2, I examine whether energy storage technologies, such as grid-scale batteries, could help reduce the transmission upgrade costs incurred when siting wind projects in distant locations. For a case study of a hypothetical 200 MW wind project in North Dakota that delivers power to Illinois, I present an optimization model that estimates the optimal size of transmission and energy storage capacity that yields the lowest average cost of generation and transmission (/MWh). I find that for this application of storage to be economical, energy storage costs would have to be 100/kWh or lower, which is well below current costs for available technologies. I conclude that there are likely better ways to use energy storage than for accessing distant wind projects. Following from this work, in Chapter 3, I present an optimization model to estimate the economics of accessing high quality wind resources in remote areas to comply with renewable energy policy targets. I include temporal aspects of wind power (variability costs and correlation to market prices) as well as total wind power produced from different farms. I assess the goal of providing

Location Independent Professional Project: A Pilot Study

Energy Technology Data Exchange (ETDEWEB)

Hudson, J.A.; Long, J.P.; Miller, M.M.

1999-02-01

This pilot study project explored the problem of providing access to the nomadic worker who desires to connect a computer through network access points at a number of different locations within the SNL/NM campus as well as outside the campus. The design and prototype development gathered knowledge that may allow a design to be developed that could be extended to a larger number of SNL/NM network drop boxes. The focus was to provide a capability for a worker to access the SNL IRN from a network drop box (e.g. in a conference room) as easily as when accessing the computer network from the office normally used by the worker. Additional study was done on new methods to authenticate the off campus worker, and protect and control access to data.

A method to determine the detector locations of the cone-beam projection of the balls’ centers

International Nuclear Information System (INIS)

Deng, Lin; Xi, Xiaoqi; Li, Lei; Han, Yu; Yan, Bin

2015-01-01

In geometric calibration of cone-beam computed tomography (CBCT), sphere-like objects such as balls are widely imaged, the positioning information of which is obtained to determine the unknown geometric parameters. In this process, the accuracy of the detector location of CB projection of the center of the ball, which we call the center projection, is very important, since geometric calibration is sensitive to errors in the positioning information. Currently in almost all the geometric calibration using balls, the center projection is invariably estimated by the center of the support of the projection or the centroid of the intensity values inside the support approximately. Clackdoyle’s work indicates that the center projection is not always at the center of the support or the centroid of the intensity values inside, and has given a quantitative analysis of the maximum errors in evaluating the center projection by the centroid. In this paper, an exact method is proposed to calculate the center projection, utilizing both the detector location of the ellipse center and the two axis lengths of the ellipse. Numerical simulation results have demonstrated the precision and the robustness of the proposed method. Finally there are some comments on this work with non-uniform density balls, as well as the effect by the error occurred in the evaluation for the location of the orthogonal projection of the cone vertex onto the detector. (paper)

Revised management plan, milestone plan, cost plan, and manpower plan. Sixth and seventh monthly status reports, October 1-November 30, 1978

Energy Technology Data Exchange (ETDEWEB)

None,

1978-01-01

The following are included: project background and discussion, technical progress reports for all subtasks, contract management summary report, milestone schedule and status report, milestone log, cost plans, cost management reports, manpower plans, and manpower management reports. The following appendices are included: selection of heat pumps simulation locations, economic computations, fuel costs, system studies, recommended methodology for calculating residential load models, potential performance of heat pumps, data required from cooling contractors, cooling locations, thermal outputs: cooling, recommended inputs for the 25 ton advanced cooling simulation study, meteorological data, and contract modification. (MHR)

Southwest regional geothermal operations research program. Summary report. First project year, June 1977--August 1978

Energy Technology Data Exchange (ETDEWEB)

Meyer, R.T.; Davidson, R.

1978-12-01

A summary report is given of the information, data, and results presented by New Mexico Energy Institute and the five State Teams in their separate draft reports. The objective is to develop scenarios for the development of each identified geothermal resource area in Arizona, Colorado, Nevada, New Mexico and Utah. Included are an overview; an economic analysis; institutitional procedures, contraints, and incentives; location of geothermal resources in the southwest; geothermal development postulations, state by state; and recommended actions for promoting and accelerating geothermal development. (MHR)

Evaluation of the Gas Turbine Modular Helium Reactor

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

Recent advances in gas-turbine and heat exchanger technology have enhanced the potential for a Modular Helium Reactor (MHR) incorporating a direct gas turbine (Brayton) cycle for power conversion. The resulting Gas Turbine Modular Helium Reactor (GT-MHR) power plant combines the high temperature capabilities of the MHR with the efficiency and reliability of modern gas turbines. While the passive safety features of the steam cycle MHR (SC-MHR) are retained, generation efficiencies are projected to be in the range of 48% and steam power conversion systems, with their attendant complexities, are eliminated. Power costs are projected to be reduced by about 20%, relative to the SC-MHR or coal. This report documents the second, and final, phase of a two-part evaluation that concluded with a unanimous recommendation that the direct cycle (DC) variant of the GT-MHR be established as the commercial objective of the US Gas-Cooled Reactor Program. This recommendation has been endorsed by industrial and utility participants and accepted by the US Department of Energy (DOE). The Phase II effort, documented herein, concluded that the DC GT-MHR offers substantial technical and economic advantages over both the IDC and SC systems. Both the DC and IDC were found to offer safety advantages, relative to the SC, due to elimination of the potential for water ingress during power operations. This is the dominant consequence event for the SC. The IDC was judged to require somewhat less development than the direct cycle, while the SC, which has the greatest technology base, incurs the least development cost and risk. While the technical and licensing requirements for the DC were more demanding, they were judged to be incremental and feasible. Moreover, the DC offers significant performance and cost improvements over the other two concepts. Overall, the latter were found to justify the additional development needs.

Evaluation of the Gas Turbine Modular Helium Reactor

International Nuclear Information System (INIS)

1994-02-01

Recent advances in gas-turbine and heat exchanger technology have enhanced the potential for a Modular Helium Reactor (MHR) incorporating a direct gas turbine (Brayton) cycle for power conversion. The resulting Gas Turbine Modular Helium Reactor (GT-MHR) power plant combines the high temperature capabilities of the MHR with the efficiency and reliability of modern gas turbines. While the passive safety features of the steam cycle MHR (SC-MHR) are retained, generation efficiencies are projected to be in the range of 48% and steam power conversion systems, with their attendant complexities, are eliminated. Power costs are projected to be reduced by about 20%, relative to the SC-MHR or coal. This report documents the second, and final, phase of a two-part evaluation that concluded with a unanimous recommendation that the direct cycle (DC) variant of the GT-MHR be established as the commercial objective of the US Gas-Cooled Reactor Program. This recommendation has been endorsed by industrial and utility participants and accepted by the US Department of Energy (DOE). The Phase II effort, documented herein, concluded that the DC GT-MHR offers substantial technical and economic advantages over both the IDC and SC systems. Both the DC and IDC were found to offer safety advantages, relative to the SC, due to elimination of the potential for water ingress during power operations. This is the dominant consequence event for the SC. The IDC was judged to require somewhat less development than the direct cycle, while the SC, which has the greatest technology base, incurs the least development cost and risk. While the technical and licensing requirements for the DC were more demanding, they were judged to be incremental and feasible. Moreover, the DC offers significant performance and cost improvements over the other two concepts. Overall, the latter were found to justify the additional development needs

Decisive management in selecting locations for development of construction projects

Science.gov (United States)

Szafranko, E.; Pawłowicz, J. A.

2017-08-01

The location of an investment project is one of the most important decisions in the construction and land development business. The shape of a new building and aspects of its future use depend on making a good choice of a land plot where it will be constructed. There are many characteristics involved descriptions of land available for development. On the one hand, different buildings (with different envisaged use) fit differently to a given location. Residential homes, for example, require a location which will ensure a peaceful lifestyle, with places for walks and recreation, situated in a relatively quite setting. On the other hand, close proximity to schools, shops or a health clinic is another important consideration. Industrial buildings should be localized so as not to be a nuisance to others, and their location should facilitate efficient transport of raw materials and ready products. Yet other requirements are defined for public buildings. It is therefore evident that the characteristics included in an evaluation of the location of a planned building can be highly diverse and their diversity makes the evaluation difficult. Selection of a location can be supported by a variety of methods. For instance, an evaluation can rely on assigning points which indicate the fulfillment of certain criteria. This approach generates a complex evaluation in the form of tables and maps of usefulness. Another possibility is to make an assessment of the criteria that a given land parcels should satisfy in order to develop a specific type of a building. Having combined these two sets of information, we can create a system or a model for the management of land resources, which will easily help to support decision making processes pertaining to the choice of a location. This article shows a model approach for a specific building.

Environmental summary document for the Republic Geothermal, Inc. application for a geothermal loan guaranty project: 64 MW well field and 48 MW (net) geothermal power plant

Energy Technology Data Exchange (ETDEWEB)

Layton, D.W.; Powers, D.J.; Leitner, P.; Crow, N.B.; Gudiksen, P.H.; Ricker, Y.E.

1979-07-01

A comprehensive review and analysis is provided of the environmental consequences of (1) guaranteeing a load for the completion of the 64 MW well field and the 48 MW (net) power plant or (2) denying a guaranteed load that is needed to finish the project. Mitigation measures are discussed. Alternatives and their impacts are compared and some discussion is included on unavoidable adverse impacts. (MHR)

EnviroAtlas - Ecosystem Service Market and Project Locations, U.S., 2015, Forest Trends' Ecosystem Marketplace

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset contains points depicting the location of market-based programs, referred to herein as markets, and projects addressing ecosystem services...

EnviroAtlas - Ecosystem Service Market and Project Locations, U.S., 2015, Forest Trends' Ecosystem Marketplace

Science.gov (United States)

This EnviroAtlas dataset contains points depicting the location of market-based programs, referred to herein as markets, and projects addressing ecosystem services protection in the United States. The data were collected via surveys and desk research conducted by Forest Trends' Ecosystem Marketplace from 2008 to 2016 on biodiversity (i.e., imperiled species/habitats; wetlands and streams), carbon, and water markets. Additional biodiversity data were obtained from the Regulatory In-lieu Fee and Bank Information Tracking System (RIBITS) database in 2015. Points represent the centroids (i.e., center points) of market coverage areas, project footprints, or project primary impact areas in which ecosystem service markets or projects operate. National-level markets are an exception to this norm with points representing administrative headquarters locations. Attribute data include information regarding the methodology, design, and development of biodiversity, carbon, and water markets and projects. This dataset was produced by Forest Trends' Ecosystem Marketplace for EnviroAtlas in order to support public access to and use of information related to environmental markets. EnviroAtlas (https://www.epa.gov/enviroatlas) allows the user to interact with a web-based, easy-to-use, mapping application to view and analyze multiple ecosystem services for the contiguous United States. The dataset is available as downloadable data (https://edg.epa.gov/data/Public/ORD/EnviroAtlas) o

Imperial Valley Environmental Project: quarterly data report

Energy Technology Data Exchange (ETDEWEB)

Nyholm, R.A.; Anspaugh, L.R. (comps.)

1977-04-13

This is a catalog of all samples which have been collected and the presently available results of chemical and other analyses. Types covered include: air quality, water quality, ecosystem quality, subsidence and seismicity, remotely sensed data, socioeconomic effects, and measurements of radioactivity. (MHR)

Evaluation and optimization of General Atomics' GT-MHR reactor cavity cooling system using an axiomatic design approach

International Nuclear Information System (INIS)

Thielman, Jeff; Ge, Ping; Wu, Qiao; Parme, Laurence

2005-01-01

The development of the Generation IV (Gen-IV) nuclear reactors has presented social, technical, and economical challenges to nuclear engineering design and research. To develop a robust, reliable nuclear reactor system with minimal environmental impact and cost, modularity has been gradually accepted as a key concept in designing high-quality nuclear reactor systems. While the establishment and reliability of a nuclear power plant is largely facilitated by the installment of standardized base units, the realization of modularity at the sub-system/sub-unit level in a base unit is still highly heuristic, and lacks consistent, quantifiable measures. In this work, an axiomatic design approach is developed to evaluate and optimize the reactor cavity cooling system (RCCS) of General Atomics' Gas Turbine-Modular Helium Reactor (GT-MHR) nuclear reactor, for the purpose of constructing a quantitative tool that is applicable to Gen-IV systems. According to Suh's axiomatic design theory, modularity is consistently represented by functional independence through the design process. Both qualitative and quantitative measures are developed here to evaluate the modularity of the current RCCS design. Optimization techniques are also used to improve the modularity at both conceptual and parametric level. The preliminary results of this study have demonstrated that the axiomatic design approach has great potential in enhancing modular design, and generating more robust, safer, and less expensive nuclear reactor sub-units

Specific issues, exact locations: case study of a community mapping project to improve safety in a disadvantaged community.

Science.gov (United States)

Qummouh, Rana; Rose, Vanessa; Hall, Pat

2012-12-01

Safety is a health issue and a significant concern in disadvantaged communities. This paper describes an example of community-initiated action to address perceptions of fear and safety in a suburb in south-west Sydney which led to the development of a local, community-driven research project. As a first step in developing community capacity to take action on issues of safety, a joint resident-agency group implemented a community safety mapping project to identify the extent of safety issues in the community and their exact geographical location. Two aerial maps of the suburb, measuring one metre by two metres, were placed on display at different locations for four months. Residents used coloured stickers to identify specific issues and exact locations where crime and safety were a concern. Residents identified 294 specific safety issues in the suburb, 41.9% (n=123) associated with public infrastructure, such as poor lighting and pathways, and 31.9% (n=94) associated with drug-related issues such as drug activity and discarded syringes. Good health promotion practice reflects community need. In a very practical sense, this project responded to community calls for action by mapping resident knowledge on specific safety issues and exact locations and presenting these maps to local decision makers for further action.

Economic sustainability of a biomass energy project located at a dairy in California, USA

International Nuclear Information System (INIS)

Camarillo, Mary Kay; Stringfellow, William T.; Jue, Michael B.; Hanlon, Jeremy S.

2012-01-01

Previous experience has demonstrated the tenuous nature of biomass energy projects located at livestock facilities in the U.S. In response, the economic sustainability of a 710 kW combined heat and power biomass energy system located on a dairy farm in California was evaluated. This biomass energy facility is unique in that a complete-mix anaerobic digester was used for treatment of manure collected in a flush-water system, co-digestates were used as additional digester feedstocks (whey, waste feed, and plant biomass), and the power plant is operating under strict regulatory requirements for stack gas emissions. Electricity was produced and sold wholesale, and cost savings resulted from the use of waste heat to offset propane demand. The impact of various operational factors was considered in the economic analysis, indicating that the system is economically viable as constructed but could benefit from introduction of additional substrates to increase methane and electricity production, additional utilization of waste heat, sale of digested solids, and possibly pursuing greenhouse gas credits. Use of technology for nitrogen oxide (NO x ) removal had a minimal effect on economic sustainability. - Highlights: ► We evaluated the economic sustainability of a dairy biomass energy project. ► The project is economically sustainable as currently operated. ► The simple payback period could be reduced if the system is operated near capacity. ► Co-digestion of off-site waste streams is recommended to improve profitability.

Improvement design study on steam generator of MHR-50/100 aiming higher safety level after water ingress accident

International Nuclear Information System (INIS)

Oyama, S.; Minatsuki, I.; Shimizu, K.

2012-01-01

Mitsubishi Heavy Industries, Ltd. (MHI) has been studying on MHI original High Temperature Gas cooled Reactor (HTGR), namely MHR-50/100, for commercialization with supported by JAEA. In the heat transfer system, steam generator (SG) is one of the most important components because it should be imposed a function of heat transfer from reactor power to steam turbine system and maintaining a nuclear grade boundary. Then we especially focused an effort of a design study on the SG having robustness against water ingress accident based on our design experience of PWR, FBR and HTGR. In this study, we carried out a sensitivity analysis from the view point of economic and plant efficiency. As a result, the SG design parameter of helium inlet/outlet temperature of 750 deg. C/300 deg. C, a side-by-side layout and one unit of SG attached to a reactor were selected. In the next, a design improvement of SG was carried out from the view point of securing the level of inherent safety without reliance on active steam dump system during water ingress accident considering the situation of the Fukushima nuclear power plant disaster on March 11, 2011. Finally, according to above basic design requirement to SG, we performed a conceptual design on adapting themes of SG structure improvement. (authors)

Sustainable Urban Development? Exploring the Locational Attributes of LEED-ND Projects in the United States through a GIS Analysis of Light Intensity and Land Use

Directory of Open Access Journals (Sweden)

Russell M. Smith

2016-06-01

Full Text Available LEED®-ND™ is the latest attempt to develop more sustainable urban environs in the United States. The LEED®-ND™ program was created to provide a green rating system that would improve the quality of life for all people through the inclusion of sustainable development practices. To achieve this, a premium is placed on the locational attributes of proposed projects under the “Smart Location and Linkages” credit category. The purpose of this paper is to explore the locational attributes of LEED®-ND™ projects in the United States to determine if projects are being located in areas that will result in achieving the program’s stated objectives. Specifically, this paper will examine two locational variables (i.e., night-time light intensity and land use cover through the use of GIS to determine the effectiveness of these criteria.

Location-based Scheduling

DEFF Research Database (Denmark)

Andersson, Niclas; Christensen, Knud

on the market. However, CPM is primarily an activity based method that takes the activity as the unit of focus and there is criticism raised, specifically in the case of construction projects, on the method for deficient management of construction work and continuous flow of resources. To seek solutions...... to the identified limitations of the CPM method, an alternative planning and scheduling methodology that includes locations is tested. Location-based Scheduling (LBS) implies a shift in focus, from primarily the activities to the flow of work through the various locations of the project, i.e. the building. LBS uses...... the graphical presentation technique of Line-of-balance, which is adapted for planning and management of work-flows that facilitates resources to perform their work without interruptions caused by other resources working with other activities in the same location. As such, LBS and Lean Construction share...

The Fire Locating and Modeling of Burning Emissions (FLAMBE) Project

Science.gov (United States)

Reid, J. S.; Prins, E. M.; Westphal, D.; Richardson, K.; Christopher, S.; Schmidt, C.; Theisen, M.; Eck, T.; Reid, E. A.

2001-12-01

The Fire Locating and Modeling of Burning Emissions (FLAMBE) project was initiated by NASA, the US Navy and NOAA to monitor biomass burning and burning emissions on a global scale. The idea behind the mission is to integrate remote sensing data with global and regional transport models in real time for the purpose of providing the scientific community with smoke and fire products for planning and research purposes. FLAMBE is currently utilizing real time satellite data from GOES satellites, fire products based on the Wildfire Automated Biomass Burning Algorithm (WF_ABBA) are generated for the Western Hemisphere every 30 minutes with only a 90 minute processing delay. We are currently collaborating with other investigators to gain global coverage. Once generated, the fire products are used to input smoke fluxes into the NRL Aerosol Analysis and Prediction System, where advection forecasts are performed for up to 6 days. Subsequent radiative transfer calculations are used to estimate top of atmosphere and surface radiative forcing as well as surface layer visibility. Near real time validation is performed using field data collected by Aerosol Robotic Network (AERONET) Sun photometers. In this paper we fully describe the FLAMBE project and data availability. Preliminary result from the previous year will also be presented, with an emphasis on the development of algorithms to determine smoke emission fluxes from individual fire products. Comparisons to AERONET Sun photometer data will be made.

Washington: a guide to geothermal energy development

Energy Technology Data Exchange (ETDEWEB)

Bloomquist, R.G.; Basescu, N.; Higbee, C.; Justus, D.; Simpson, S.

1980-06-01

Washington's geothermal potential is discussed. The following topics are covered: exploration, drilling, utilization, legal and institutional setting, and economic factors of direct use projects. (MHR)

Solar energy in Australia: a profile of renewable energy activity in its national context

Energy Technology Data Exchange (ETDEWEB)

Case, G.L.

1980-08-01

The following topics are included: country overview; energy summary; geopolitical, economic, and cultural aspects of Australia; the energy profile; and international agreements, contacts, manufacturers, and projects. (MHR)

Accurate characterisation of hole size and location by projected fringe profilometry

Science.gov (United States)

Wu, Yuxiang; Dantanarayana, Harshana G.; Yue, Huimin; Huntley, Jonathan M.

2018-06-01

The ability to accurately estimate the location and geometry of holes is often required in the field of quality control and automated assembly. Projected fringe profilometry is a potentially attractive technique on account of being non-contacting, of lower cost, and orders of magnitude faster than the traditional coordinate measuring machine. However, we demonstrate in this paper that fringe projection is susceptible to significant (hundreds of µm) measurement artefacts in the neighbourhood of hole edges, which give rise to errors of a similar magnitude in the estimated hole geometry. A mechanism for the phenomenon is identified based on the finite size of the imaging system’s point spread function and the resulting bias produced near to sample discontinuities in geometry and reflectivity. A mathematical model is proposed, from which a post-processing compensation algorithm is developed to suppress such errors around the holes. The algorithm includes a robust and accurate sub-pixel edge detection method based on a Fourier descriptor of the hole contour. The proposed algorithm was found to reduce significantly the measurement artefacts near the hole edges. As a result, the errors in estimated hole radius were reduced by up to one order of magnitude, to a few tens of µm for hole radii in the range 2–15 mm, compared to those from the uncompensated measurements.

Geothermal Energy Development annual report 1979

Energy Technology Data Exchange (ETDEWEB)

1980-08-01

This report is an exerpt from Earth Sciences Division Annual Report 1979 (LBL-10686). Progress in thirty-four research projects is reported including the following area: geothermal exploration technology, geothermal energy conversion technology, reservoir engineering, and geothermal environmental research. Separate entries were prepared for each project. (MHR)

Commercial milk distribution profiles and production locations. Hanford Environmental Dose Reconstruction Project

Energy Technology Data Exchange (ETDEWEB)

Deonigi, D.E.; Anderson, D.M.; Wilfert, G.L.

1994-04-01

The Hanford Environmental Dose Reconstruction (HEDR) Project was established to estimate radiation doses that people could have received from nuclear operations at the Hanford Site since 1944. For this period iodine-131 is the most important offsite contributor to radiation doses from Hanford operations. Consumption of milk from cows that ate vegetation contaminated by iodine-131 is the dominant radiation pathway for individuals who drank milk (Napier 1992). Information has been developed on commercial milk cow locations and commercial milk distribution during 1945 and 1951. The year 1945 was selected because during 1945 the largest amount of iodine-131 was released from Hanford facilities in a calendar year (Heeb 1993); therefore, 1945 was the year in which an individual was likely to have received the highest dose. The year 1951 was selected to provide data for comparing the changes that occurred in commercial milk flows (i.e., sources, processing locations, and market areas) between World War II and the post-war period. To estimate the doses people could have received from this milk flow, it is necessary to estimate the amount of milk people consumed, the source of the milk, the specific feeding regime used for milk cows, and the amount of iodine-131 contamination deposited on feed.

Solar energy in Argentina: a profile of renewable energy activity in its national context

Energy Technology Data Exchange (ETDEWEB)

Hawkins, D.

1981-01-01

The following subjects are included: the country overview; the energy summary; the geopolitical, economic, and cultural aspects of the Republic of Argentina; the energy profile; and international contacts, manufacturers, and projects. (MHR)

Proceedings: special panel on geothermal model intercomparison study

Energy Technology Data Exchange (ETDEWEB)

1980-12-17

Separate abstracts were prepared for five papers. Two papers were abstracted previously for EDB. Five panel responses to the project, three workshop session summaries, and conclusions drawn are also included in this report. (MHR)

A layout designer's data projection reticle. [for optimum indicator instrument location in aircraft

Science.gov (United States)

Haines, R. F.

1977-01-01

The designer's projection reticle is a modified surplus weapons sighting device consisting of a 3.5 cm diameter, 8.9 focal length coated objective lens. It is placed 1.5 cm in front of a clear flat glass plate on which the aluminized reflective pattern has been deposited. Reflected light passes through the objective lens, off the front surface of the coating, and off the rear coated surface of the objective lens. Several reticle patterns have been designed and tested, and other patterns are in the planning stage. The device may be used for a variety of applications including determining the optimum locations on a cockpit panel for luminous warning indicators requiring rapid manual responses.

Geodynamics Project. US progress report, 1975

Energy Technology Data Exchange (ETDEWEB)

1976-01-01

The recommendations of the US Geodynamics Committee relative to program activities are presented. US Program progress is reviewed in the following areas: fine structure of the crust and upper mantle; continuous seismic reflection profiling of the deep basement: Hardeman County, Texas; Mid-Atlantic Ridge - evolution of oceanic lithosphere; internal processes and properties; crystal growing; chemical differentiation of magmas; geodynamic modelling; magnetic problems; plate boundaries; plate interiors; geodynamic syntheses; and eustatic cycles of sea level changes. (MHR)

Analysis of Variance of the Effects of a Project’s Location on Key Issues and Challenges in Post-Disaster Reconstruction Projects

Directory of Open Access Journals (Sweden)

Dzulkarnaen Ismail

2017-11-01

Full Text Available After a disaster, the reconstruction phase is driven by immediate challenges. One of the main challenges in the post-disaster period is the way that reconstruction projects are implemented. Reconstruction cannot move forward until some complex issues are settled. The purposes of this research are to highlight the issues and challenges in post-disaster reconstruction (PDR projects and to determine the significant differences between the issues and challenges in different locations where PDR projects are carried out. The researchers collected data within international non-governmental organisations (INGOs on their experience of working with PDR projects. The findings of this research provide the foundation on which to build strategies for avoiding project failures; this may be useful for PDR project practitioners in the future.

Development of the French Photovoltaic Program

Energy Technology Data Exchange (ETDEWEB)

Brunet, M.

1980-07-01

The French photovoltaic research program is reviewed, listing companies involved. Projections of module and system costs are discussed. French industrial experience in photovoltaics is reviewed and several French systems operating in developing countries are mentioned. (MHR)

Geothermal resource assessment for the state of Texas: status of progress, November 1980. Final report. Appendices A through D

Energy Technology Data Exchange (ETDEWEB)

Woodruff, C.M. Jr.; Caran, S.C.; Gever, C.; Henry, C.D.; Macpherson, G.L.; McBride, M.W.

1982-03-01

These appendices include: a folio of county maps showing locations of well data across the state; a computerized tabulation of the wells depicted; an explanation of the computer coding procedures; and a selected bibliography on heat flow and geothermics. (MHR)

Direct utilization of geothermal energy: a layman's guide. Geothermal Resources Council special report No. 8

Energy Technology Data Exchange (ETDEWEB)

Anderson, D.N.; Lund, J.W. (eds.)

1979-01-01

The following subjects are covered: nature and distribution of geothermal energy; exploration, confirmation, and evaluation of the resource; reservoir development and management; utilization; economics of direct-use development; financing direct-use projects; and legal, institutional, and environmental aspects. (MHR)

The Modular Helium Reactor for Hydrogen Production

International Nuclear Information System (INIS)

E. Harvego; M. Richards; A. Shenoy; K. Schultz; L. Brown; M. Fukuie

2006-01-01

For electricity and hydrogen production, an advanced reactor technology receiving considerable international interest is a modular, passively-safe version of the high-temperature, gas-cooled reactor (HTGR), known in the U.S. as the Modular Helium Reactor (MHR), which operates at a power level of 600 MW(t). For hydrogen production, the concept is referred to as the H2-MHR. Two concepts that make direct use of the MHR high-temperature process heat are being investigated in order to improve the efficiency and economics of hydrogen production. The first concept involves coupling the MHR to the Sulfur-Iodine (SI) thermochemical water splitting process and is referred to as the SI-Based H2-MHR. The second concept involves coupling the MHR to high-temperature electrolysis (HTE) and is referred to as the HTE-Based H2-MHR

Interaction in activity location scheduling

NARCIS (Netherlands)

Tabak, V.; Vries, de B.; Dijkstra, J.; Jessurun, A.J.

2006-01-01

In this paper we discuss the interaction in activity location scheduling which is the main subject of an ongoing research project called "User Simulation of Space Utilization". The aim of this research project is to develop an overall model for the simulation of human movement and utilization of

Creating a BYOD Tour Around Poznan, Poland – A Location-based Project for Teenage Students

Directory of Open Access Journals (Sweden)

Magdalena Agnieszka Brzezinska

2018-05-01

Full Text Available This paper focuses on a project that encompasses place-based learning, location-based learning and problem-based learning in teaching of English as a foreign language. It shows how a project of this type can increase student motivation and help teenagers embrace local culture. It originated when the author of this paper was introduced to the Wandering platform and the Experiencity platform by one of the co-creators of the former, Ms. Talila Yehiel, a museum expert and a designer of tailor-made sites for museum visits. After examining the various options of the Experiencity platform on her own, and upon developing two walks: The Past and the Present: Jewish Heritage Walk in Bielsko-Biala and Karl Korn Walk, the author undertook to test it with her teenage students, designing a completely new location-based activity: Be Active and Explore Poznan. As recommended by Piaget, the author challenged her students and was a guide and facilitator rather than a lecturer. She made the students work together and find answers and solutions to the problems posed. She also trusted Vygotsky and Dewey in assuming that learners are social individuals and place-based education helps “students connect with their particular corners of the world” (Woodhouse and Knapp, [9]. The walk demonstrates interaction of teenagers with and in space: it inspects the particular characteristics of a place, it is cross-curricular and intrinsically empirical, and it forms a relation between place, self and community (Woodhouse and Knapp, [9]. It also uses local environment to make students active citizens, contributing to the society (compare [7], p.7.

Expansion of the Geo-Heat Quarterly Bulletin. Final report, 15 June 1978-30 June 1979

Energy Technology Data Exchange (ETDEWEB)

Lienau, P.J.

1979-06-30

The work of the Center is described in the areas of: public information dissemination service, technical assistance to developers, regional resource planning, and applied research projects. Included in the appendix are four issues of the Geo-Heat Utilization Center Quarterly Bulletin. (MHR)

Sacramento Municipal Utility District Geothermal Power Plant, SMUDGEO No. 1. Final report

Energy Technology Data Exchange (ETDEWEB)

1981-02-01

The proposed construction of 72-MW geothermal power plant is discussed. The following aspects are covered: the project as proposed by the utility; the environmental setting; the adverse consequences of the project, any significant environmental effects which cannot be avoided, and any mitigation measures to minimize significant effects; the potential feasible alternatives to the proposed project; the significant unavoidable, irreversible, and long-term environmental impacts; and the Growth Inducing Impacts. (MHR)

Surface Environmental Surveillance Project: Locations Manual Volume 1 – Air and Water Volume 2 – Farm Products, Soil & Vegetation, and Wildlife

Energy Technology Data Exchange (ETDEWEB)

Fritz, Brad G.; Patton, Gregory W.; Stegen, Amanda; Poston, Ted M.

2009-01-01

This report describes all environmental monitoring locations associated with the Surface Environmental Surveillance Project. Environmental surveillance of the Hanford site and surrounding areas is conducted by the Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy (DOE). Sampling is conducted to evaluate levels of radioactive and nonradioactive pollutants in the Hanford environs, as required in DOE Order 450.1, Environmental Protection Program, and DOE Order 5400.5, Radiation Protection of the Public and the Environment. The environmental surveillance sampling design is described in the Hanford Site Environmental Monitoring Plan, United States Department of Energy, Richland Operation Office (DOE/RL-91-50). This document contains the locations of sites used to collect samples for the Surface Environmental Surveillance Project (SESP). Each section includes directions, maps, and pictures of the locations. A general knowledge of roads and highways on and around the Hanford Site is necessary to successfully use this manual. Supplemental information (Maps, Gazetteer, etc.) may be necessary if user is unfamiliar with local routes. The SESP is a multimedia environmental surveillance effort to measure the concentrations of radionuclides and chemicals in environmental media to demonstrate compliance with applicable environmental quality standards and public exposure limits, and assessing environmental impacts. Project personnel annually collect selected samples of ambient air, surface water, agricultural products, fish, wildlife, and sediments. Soil and vegetation samples are collected approximately every 5 years. Analytical capabilities include the measurement of radionuclides at very low environmental concentrations and, in selected media, nonradiological chemicals including metals, anions, volatile organic compounds, and total organic carbon.

Selection of adequate site location during early stages of construction project management: A multi-criteria decision analysis approach

Science.gov (United States)

Marović, Ivan; Hanak, Tomaš

2017-10-01

In the management of construction projects special attention should be given to the planning as the most important phase of decision-making process. Quality decision-making based on adequate and comprehensive collaboration of all involved stakeholders is crucial in project’s early stages. Fundamental reasons for existence of this problem arise from: specific conditions of construction industry (final products are inseparable from the location i.e. location has a strong influence of building design and its structural characteristics as well as technology which will be used during construction), investors’ desires and attitudes, and influence of socioeconomic and environment aspects. Considering all mentioned reasons one can conclude that selection of adequate construction site location for future investment is complex, low structured and multi-criteria problem. To take into account all the dimensions, the proposed model for selection of adequate site location is devised. The model is based on AHP (for designing the decision-making hierarchy) and PROMETHEE (for pairwise comparison of investment locations) methods. As a result of mixing basis feature of both methods, operational synergies can be achieved in multi-criteria decision analysis. Such gives the decision-maker a sense of assurance, knowing that if the procedure proposed by the presented model has been followed, it will lead to a rational decision, carefully and systematically thought out.

Solar energy in Italy: a profile of renewable energy activity in its national context

Energy Technology Data Exchange (ETDEWEB)

Shea, C.A.

1980-12-01

The following are included: country overview; energy summary; Italian Republic-geopolitical, economic, and cultural aspects; the energy profile; imported energy sources; solar energy research and development; solar energy organizations; solar energy related legislation and administration policies; and international agreements, contacts, manufacturers, and projects. (MHR)

Occidental Geothermal, Inc. , Oxy Geothermal Power Plant No. 1: draft environmental impact report

Energy Technology Data Exchange (ETDEWEB)

1981-08-01

The following aspects of the proposed geothermal power plant are discussed: the project description; the environment in the vicinity of project as it exists before the project begins, from both a local and regional perspective; the adverse consequences of the project, any significant environmental effects which cannot be avoided, and any mitigation measures to minimize significant effects; the potential feasible alternatives to the proposed project; the significant unavoidable, irreversible, and long-term environmental impacts; and the growth inducing impacts. (MHR)

i-Locate - Indoor/Outdoor location and Asset Management through Open Data

Directory of Open Access Journals (Sweden)

Claudio Eccher

2015-02-01

Full Text Available Studi recenti hanno evidenziato che, in media, trascorriamo circa il 90% del nostro tempo in ambienti chiusi e, spesso, non familiari. L’esigenza di localizzare/guidare persone o ogg etti in spazi sia esterni che interni (senza discontinuità tra esterno ed interno darà origine ad una serie di nuovi servizi di tipo LBS (Location-Based Services che potranno avere anche una notevole rilevanza economica. i-locate (Indoor / outdoor location and Asset Management Through open geodata is a project that aims to develop a set of tools and services based on geo location technologies based on open data for the location and management of objects in indoor and outdoor spaces. The tools are intended both to citizens who use their smartphones to access services, aids to navigation from the front door to internal destinations to buildings (public office, clinic, shop, etc.. Obtaining any information available to support (code , unforeseen changes in the path, suggestions, etc., and professionals for specific activities that require the location of people, equipment, etc. i-locate to an intense use of GIS technologies for navigation and tracking "indoor" (indoor GIS, 3D GIS, to locate people (eg. Alzheimer's patients and their movements in areas not suited (geofencing to identify and track objects / portable equipment for their location, management and maintenance.

i-Locate - Indoor/Outdoor location and Asset Management through Open Data

Directory of Open Access Journals (Sweden)

Claudio Eccher

2015-02-01

Full Text Available Studi recenti hanno evidenziato che, in media, trascorriamo circa il 90% del nostro tempo in ambienti chiusi e, spesso, non familiari. L’esigenza di localizzare/guidare persone o ogg etti in spazi sia esterni che interni (senza discontinuità tra esterno ed interno darà origine ad una serie di nuovi servizi di tipo LBS (Location-Based Services che potranno avere anche una notevole rilevanza economica.i-locate (Indoor / outdoor location and Asset Management Through open geodata is a project that aims to develop a set of tools and services based on geo location technologies based on open data for the location and management of objects in indoor and outdoor spaces. The tools are intended both to citizens who use their smartphones to access services, aids to navigation from the front door to internal destinations to buildings (public office, clinic, shop, etc.. Obtaining any information available to support (code , unforeseen changes in the path, suggestions, etc., and professionals for specific activities that require the location of people, equipment, etc. i-locate to an intense use of GIS technologies for navigation and tracking "indoor" (indoor GIS, 3D GIS, to locate people (eg. Alzheimer's patients and their movements in areas not suited (geofencing to identify and track objects / portable equipment for their location, management and maintenance.

Ocean Thermal Energy Conversion (OTEC) program. FY 1977 program summary

Energy Technology Data Exchange (ETDEWEB)

None

1978-01-01

An overview is given of the ongoing research, development, and demonstration efforts. Each of the DOE's Ocean Thermal Energy Conversion projects funded during fiscal year 1977 (October 1, 1976 through September 30, 1977) is described and each project's status as of December 31, 1977 is reflected. These projects are grouped as follows: program support, definition planning, engineering development, engineering test and evaluation, and advanced research and technology. (MHR)

Passive and Hybrid Solar Energy Program

Energy Technology Data Exchange (ETDEWEB)

1980-11-01

The background and scope of the program is presented in general terms. The Program Plan is summarized describing how individual projects are categorized into mission-oriented tasks according to market sector categories. The individual projects funded by DOE are presented as follows: residential buildings, commercial buildings, solar products, solar cities and towns, and agricultural buildings. A summary list of projects by institution (contractors) and indexed by market application area is included. (MHR)

State geothermal commercialization programs in seven Rocky Mountain States. Semi-annual progress report, January-June 1980

Energy Technology Data Exchange (ETDEWEB)

Tuttle, J.; Coe, B.A.; Gertsch, W.D.; Meyer, R.T.

1980-12-01

The following are included: a summary of the state projects, a summary of findings, public outreach, and a description of the major conclusions and recommendations. The commercialization activities carried out by the state teams are described for Colorado, Montana, New Mexico, North Dakota, South Dakota, Utah, and Wyoming. (MHR)

Hydrogen Process Coupling to Modular Helium Reactors

International Nuclear Information System (INIS)

Shenoy, Arkal; Richards, Matt; Buckingham, Robert

2009-01-01

The U.S. Department of Energy (DOE) has selected the helium-cooled High Temperature Gas-Cooled Reactor (HTGR) as the concept to be used for the Next Generation Nuclear Plant (NGNP), because it is the most advanced Generation IV concept with the capability to provide process heat at sufficiently high temperatures for production of hydrogen with high thermal efficiency. Concurrently with the NGNP program, the Nuclear Hydrogen Initiative (NHI) was established to develop hydrogen production technologies that are compatible with advanced nuclear systems and do not produce greenhouse gases. The current DOE schedule for the NGNP Project calls for startup of the NGNP plant by 2021. The General Atomics (GA) NGNP pre-conceptual design is based on the GA Gas Turbine Modular Helium Reactor (GT-MHR), which utilizes a direct Brayton cycle Power Conversion System (PCS) to produce electricity with a thermal efficiency of 48%. The nuclear heat source for the NGNP consists of a single 600-MW(t) MHR module with two primary coolant loops for transport of the high-temperature helium exiting the reactor core to a direct cycle PCS for electricity generation and to an Intermediate Heat Exchanger (IHX) for hydrogen production. The GA NGNP concept is designed to demonstrate hydrogen production using both the thermochemical sulfur-iodine (SI) process and high-temperature electrolysis (HTE). The two primary coolant loops can be operated independently or in parallel. The reactor design is essentially the same as that for the GT-MHR, but includes the additional primary coolant loop to transport heat to the IHX and other modifications to allow operation with a reactor outlet helium temperature of 950 .deg. C (vs. 850 .deg. C for the GT-MHR). The IHX transfers a nominal 65 MW(t) to the secondary heat transport loop that provides the high-temperature heat required by the SI-based and HTE-based hydrogen production facilities. Two commercial nuclear hydrogen plant variations were evaluated with

Environmental impact report (draft)

Energy Technology Data Exchange (ETDEWEB)

1980-05-01

The three projects as proposed by Pacific Gas and Electric Company and the environmental analysis of the projects are discussed. Sections on the natural and social environments of the proposed projects and their surrounding areas consist of descriptions of the setting, discussions of the adverse and beneficial consequences of the project, and potential mitigation measures to reduce the effects of adverse impacts. The Environmental Impact Report includes discussions of unavoidable adverse effects, irreversible changes, long-term and cumulative impacts, growth-inducing effects, and feasible alternatives to the project. (MHR)

Uruguay project - Metalic silicon manufacturing. Palmar location study

International Nuclear Information System (INIS)

2003-01-01

This work is about the Soriano town possibilities offered to Rima Industrial S.A in relation with the metallic silicon project in Uruguay. In this zone there is the Palmar hydroelectric plant with a capacity of 33 MW and its development is part of the Rio Negro river

Cervical enamel projections in unusual locations: a case report and mini-review.

Science.gov (United States)

Chan, Hsun-Liang; Oh, Tae-Ju; Bashutski, Jill; Fu, Jia-Hui; Wang, Hom-Lay

2010-05-01

Periodontitis is primarily a bacteria-induced disease that can be modified by tooth-related local factors. Cervical enamel projections (CEPs) are a common tooth anomaly that can act as contributing factors in the development of periodontitis. They are most commonly found at the buccal surfaces of mandibular molars. A 57-year-old female was referred to our clinic for treatment of chronic periodontitis. A clinical examination revealed moderate attachment loss that was localized to the palatal side of the maxillary second molars. The rest of the dentition was less affected, with a diagnosis of generalized slight chronic periodontitis. An initial non-surgical periodontal treatment was provided followed by apically positioned flap surgery in the maxillary right and left posterior areas. At the time of surgery, CEPs were found where the periodontium was most affected. Because surgical intervention exposed the CEPs, they were not removed. After the active therapy, which resulted in inflammation resolution and maintainable probing depths, the patient was placed on a 3-month recall for periodontal maintenance. CEPs were found in an unusual location on the palatal roots of maxillary second molars. The findings of this case report confirm the role of CEPs as a local contributing factor in localized chronic periodontitis.

EGS hydraulic stimulation monitoring by surface arrays - location accuracy and completeness magnitude: the Basel Deep Heat Mining Project case study

Science.gov (United States)

Häge, Martin; Blascheck, Patrick; Joswig, Manfred

2013-01-01

The potential and limits of monitoring induced seismicity by surface-based mini arrays was evaluated for the hydraulic stimulation of the Basel Deep Heat Mining Project. This project aimed at the exploitation of geothermal heat from a depth of about 4,630 m. As reference for our results, a network of borehole stations by Geothermal Explorers Ltd. provided ground truth information. We utilized array processing, sonogram event detection and outlier-resistant, graphical jackknife location procedures to compensate for the decrease in signal-to-noise ratio at the surface. We could correctly resolve the NNW-SSE striking fault plane by relative master event locations. Statistical analysis of our catalog data resulted in M L 0.36 as completeness magnitude, but with significant day-to-night dependency. To compare to the performance of borehole data with M W 0.9 as completeness magnitude, we applied two methods for converting M L to M W which raised our M C to M W in the range of 0.99-1.13. Further, the b value for the duration of our measurement was calculated to 1.14 (related to M L), respectively 1.66 (related to M W), but changes over time could not be resolved from the error bars.

Final environmental impact report. Part I. Pacific Gas and Electric Company Geysers Unit 16, Geothermal Power Plant, Lake County, California

Energy Technology Data Exchange (ETDEWEB)

1981-03-01

The environmental analysis includes the following: geology, soils, hydrology, water quality, vegetation, wildlife, air resources, health and safety, noise, waste management, cultural resources, land use, aesthetics, socioeconomics, public services, transportation, and energy and material resources. Also included are: the project description, a summary of environmental consequences, and alternatives to the proposed action. (MHR)

Ultra-deep sequencing reveals high prevalence and broad structural diversity of hepatitis B surface antigen mutations in a global population.

Science.gov (United States)

Gencay, Mikael; Hübner, Kirsten; Gohl, Peter; Seffner, Anja; Weizenegger, Michael; Neofytos, Dionysios; Batrla, Richard; Woeste, Andreas; Kim, Hyon-Suk; Westergaard, Gaston; Reinsch, Christine; Brill, Eva; Thu Thuy, Pham Thi; Hoang, Bui Huu; Sonderup, Mark; Spearman, C Wendy; Pabinger, Stephan; Gautier, Jérémie; Brancaccio, Giuseppina; Fasano, Massimo; Santantonio, Teresa; Gaeta, Giovanni B; Nauck, Markus; Kaminski, Wolfgang E

2017-01-01

The diversity of the hepatitis B surface antigen (HBsAg) has a significant impact on the performance of diagnostic screening tests and the clinical outcome of hepatitis B infection. Neutralizing or diagnostic antibodies against the HBsAg are directed towards its highly conserved major hydrophilic region (MHR), in particular towards its "a" determinant subdomain. Here, we explored, on a global scale, the genetic diversity of the HBsAg MHR in a large, multi-ethnic cohort of randomly selected subjects with HBV infection from four continents. A total of 1553 HBsAg positive blood samples of subjects originating from 20 different countries across Africa, America, Asia and central Europe were characterized for amino acid variation in the MHR. Using highly sensitive ultra-deep sequencing, we found 72.8% of the successfully sequenced subjects (n = 1391) demonstrated amino acid sequence variation in the HBsAg MHR. This indicates that the global variation frequency in the HBsAg MHR is threefold higher than previously reported. The majority of the amino acid mutations were found in the HBV genotypes B (28.9%) and C (25.4%). Collectively, we identified 345 distinct amino acid mutations in the MHR. Among these, we report 62 previously unknown mutations, which extends the worldwide pool of currently known HBsAg MHR mutations by 22%. Importantly, topological analysis identified the "a" determinant upstream flanking region as the structurally most diverse subdomain of the HBsAg MHR. The highest prevalence of "a" determinant region mutations was observed in subjects from Asia, followed by the African, American and European cohorts, respectively. Finally, we found that more than half (59.3%) of all HBV subjects investigated carried multiple MHR mutations. Together, this worldwide ultra-deep sequencing based genotyping study reveals that the global prevalence and structural complexity of variation in the hepatitis B surface antigen have, to date, been significantly underappreciated.

WHERE2 Location Aided Communications

DEFF Research Database (Denmark)

Dammann, Armin; Agapiou, George; Brunel, Loïc

2013-01-01

This paper presents an overview of preliminary results of investigations within the WHERE2 Project on identifying promising avenues for location aided enhancements to wireless communication systems. The wide ranging contributions are organized according to the following targeted systems: cellular...

Heber Ethanol Fuel Facility, Imperial Valley, California. Quarterly report No. 2, March 1981-May 1981

Energy Technology Data Exchange (ETDEWEB)

1981-08-01

The purposed project is a commercial-scale ethanol-fuel facility with a capacity of twenty million gallons per year of fuel-grade ethanol. In addition, 70,000 tons per year of distillers dried grains will be produced. The following tasks and issues are addressed: process engineering - process descriptions, plant layout, and design; economics and finance - overview of capital and operating costs; environmental analysis - preliminary project description; and permit processing and legal issues. (MHR)

Testing the Quick Seismic Event Locator and Magnitude Calculator (SSL_Calc) by Marsite Project Data Base

Science.gov (United States)

Tunc, Suleyman; Tunc, Berna; Caka, Deniz; Baris, Serif

2016-04-01

Locating and calculating size of the seismic events is quickly one of the most important and challenging issue in especially real time seismology. In this study, we developed a Matlab application to locate seismic events and calculate their magnitudes (Local Magnitude and empirical Moment Magnitude) using single station called SSL_Calc. This newly developed sSoftware has been tested on the all stations of the Marsite project "New Directions in Seismic Hazard Assessment through Focused Earth Observation in the Marmara Supersite-MARsite". SSL_Calc algorithm is suitable both for velocity and acceleration sensors. Data has to be in GCF (Güralp Compressed Format). Online or offline data can be selected in SCREAM software (belongs to Guralp Systems Limited) and transferred to SSL_Calc. To locate event P and S wave picks have to be marked by using SSL_Calc window manually. During magnitude calculation, instrument correction has been removed and converted to real displacement in millimeter. Then the displacement data is converted to Wood Anderson Seismometer output by using; Z=[0;0]; P=[-6.28+4.71j; -6.28-4.71j]; A0=[2080] parameters. For Local Magnitude calculation,; maximum displacement amplitude (A) and distance (dist) are used in formula (1) for distances up to 200km and formula (2) for more than 200km. ML=log10(A)-(-1.118-0.0647*dist+0.00071*dist2-3.39E-6*dist3+5.71e-9*dist4) (1) ML=log10(A)+(2.1173+0.0082*dist-0.0000059628*dist2) (2) Following Local Magnitude calculation, the programcode calculates two empiric Moment Magnitudes using formulas (3) Akkar et al. (2010) and (4) Ulusay et al. (2004). Mw=0.953* ML+0.422 (3) Mw=0.7768* ML+1.5921 (4) SSL_Calc is a software that is easy to implement and user friendly and offers practical solution to individual users to location of event and ML, Mw calculation.

Trevino Project: a fast-track approach for a small construction project

International Nuclear Information System (INIS)

Schick, C.J.; Lynn, N.S.

1982-01-01

The approach to a construction project can vary according to the size, location, and degree of difficulty associated with the project. This paper deals with one approach that can be taken to a small construction project, the fast-track approach. A small construction project can be defined as a project having less than $20 million capital cost or a project with a low degree of difficulty. This approach is very applicable to in-situ leaching uranium projects, small precious metal operations, etc. The approach to the small project is that of fast-tracking the project in order to minimize the time over which capital expenditure occurs and also to reduce the indirect costs of field expense, construction supplies, construction equipment, etc. In order to fast-track a project it is necessary to do a very precise job on the preliminary phases of the project such as preliminary engineering, plant site location, environmental permits, etc. 2 figures, 2 tables

Environmental assessmental, geothermal energy, Heber geothermal binary-cycle demonstration project: Imperial County, California

Energy Technology Data Exchange (ETDEWEB)

1980-10-01

The proposed design, construction, and operation of a commercial-scale (45 MWe net) binary-cycle geothermal demonstration power plant are described using the liquid-dominated geothermal resource at Heber, Imperial County, California. The following are included in the environmental assessment: a description of the affected environment, potential environmental consequences of the proposed action, mitigation measures and monitoring plans, possible future developmental activities at the Heber anomaly, and regulations and permit requirements. (MHR)

Assessment of target markets for deployment of modular HTGRs

International Nuclear Information System (INIS)

Richards, M.; Hamilton, C.; Venneri, F.

2014-01-01

The Next Generation Nuclear Plant (NGNP) Industry Alliance (NIA) consists of 16 companies and organizations that support development and deployment of modular High Temperature Gas-Cooled Reactors (modular HTGRs or MHRs). These companies include reactor vendors, utilities, potential industrial end users of MHR process steam/heat, nuclear graphite vendors, and companies with design, technology development, regulatory licensing, and other HTGR subject matter expertise. The NIA has been investigating potential markets for MHRs in both North America and globally as part of its business plan development. MHRs have inherent, melt-down proof safety with high-temperature capability and high utilization of the nuclear heat for production of electricity and process heat. These features allow MHRs to be located within close proximity to the public and industrial end users, and in locations with very limited or no availability of cooling water as the ultimate heat sink. This paper provides a summary of recent NIA target market assessments, including selected markets which currently utilize high value oil and expensive liquefied natural gas (LNG) fuels for process heat and electricity generation on a large scale (e.g., Kingdom of Saudi Arabia, Japan, and Korea). Results show that significant markets exist today for economical deployment of steam-cycle MHRs for electricity and process heat, especially in countries/regions that utilize expensive (or heavily subsidized) fossil fuels for energy needs. Low natural gas prices in North America presently inhibit expansion of any nuclear technology, but MHRs should be economically competitive by the 2030 - 2040 time frame, when natural gas prices are projected to be in the $7 to $10 per MMBtu price range. There is also good market potential for higher temperature MHR applications, including nuclear steel manufacturing, production of synthetic fuels, and hydrogen production. (author)

Assessment of target markets for deployment of modular HTGRs

Energy Technology Data Exchange (ETDEWEB)

Richards, M.; Hamilton, C.; Venneri, F., E-mail: mrichards@ultrasafe-nuclear.com, E-mail: chamilton@ultrasafe-nuclear.com, E-mail: fvenneri@ultrasafe-nuclear.com [Ultra Safe Nuclear Corp., Los Alamos, NM (United States)

2014-07-01

The Next Generation Nuclear Plant (NGNP) Industry Alliance (NIA) consists of 16 companies and organizations that support development and deployment of modular High Temperature Gas-Cooled Reactors (modular HTGRs or MHRs). These companies include reactor vendors, utilities, potential industrial end users of MHR process steam/heat, nuclear graphite vendors, and companies with design, technology development, regulatory licensing, and other HTGR subject matter expertise. The NIA has been investigating potential markets for MHRs in both North America and globally as part of its business plan development. MHRs have inherent, melt-down proof safety with high-temperature capability and high utilization of the nuclear heat for production of electricity and process heat. These features allow MHRs to be located within close proximity to the public and industrial end users, and in locations with very limited or no availability of cooling water as the ultimate heat sink. This paper provides a summary of recent NIA target market assessments, including selected markets which currently utilize high value oil and expensive liquefied natural gas (LNG) fuels for process heat and electricity generation on a large scale (e.g., Kingdom of Saudi Arabia, Japan, and Korea). Results show that significant markets exist today for economical deployment of steam-cycle MHRs for electricity and process heat, especially in countries/regions that utilize expensive (or heavily subsidized) fossil fuels for energy needs. Low natural gas prices in North America presently inhibit expansion of any nuclear technology, but MHRs should be economically competitive by the 2030 - 2040 time frame, when natural gas prices are projected to be in the $7 to $10 per MMBtu price range. There is also good market potential for higher temperature MHR applications, including nuclear steel manufacturing, production of synthetic fuels, and hydrogen production. (author)

Computer Assets Recovery Project

Science.gov (United States)

CortesPena, Aida Yoguely

2010-01-01

This document reports on the project that was performed during the internship of the author. The project involved locating and recovering machines in various locations that Boeing has no need for, and therefore requires that they be transferred to another user or transferred to a non-profit organization. Other projects that the author performed was an inventory of toner and printers, loading new computers and connecting them to the network.

Utilization of geothermal energy for methane production for J. A. Albertson Land and Cattle Company. Final report

Energy Technology Data Exchange (ETDEWEB)

1980-07-01

The feasibility of an integrated system to utilize a geothermal resource for a bioconversion plant. This integrated facility would use the manure from approximately 30,000 head of feedlot cattle as a feedstock for an anaerobic digestion plant. The findings on engineering design, geological assessment, environmental, economic, and institutional requirements of the proposed project are summarized. (MHR)

Department of Energy's solar update. Four regional conferences highlighting the objectives, plans, and experience of the National Commercial Solar Heating and Cooling Demonstration Program and the National Solar Data Program

Energy Technology Data Exchange (ETDEWEB)

None

1978-07-01

These proceedings represent the overview and project papers made available to all the participants at each of the regional conferences. Papers not available at time of publication, and additional materials, including a summary and analysis of the Workshop/Panel Sessions are included in the complete proceedings CONF-780701--(Rev.) for which individual abstracts were prepared for each paper. (MHR)

Locating techniques for nuclear power stations

International Nuclear Information System (INIS)

Hayashi, Masao

1983-01-01

The basic thought in locating nuclear power stations is to examine carefully the suitability of sites and the safety of plants, and in the end, to perfect the safety of public. In Japan, effort is exerted to obtain the trust of local people by carrying out investigation, research and examination from respective standpoints of the government, institutes and industries. The author has engaged in the standardization of the investigation, test and analysis regarding the aseismatic capability of ground, the verifying project in Tadotsu of the coupled vibration of ground and structures, the evaluation of the performance of large vibration tables, the future concept of new locating procedure and so on in the last more than ten years. The technological classification of ground, the technological meaning of active faults, the procedure of the aseismatic design of plants, the difference of earthquake input force according to various locating methods, 12 rules regarding the attenuation of vibration of ground, and the concept of new locating method in the 21st century are explained. As the new locating techniques applicable to central Japan, diluvial ground location, floating location in tunnels, underground location, offshore location and so on must be promoted. (Kako, I.)

Key physical parameters and temperature reactivity coefficients of the deep burn modular helium reactor fueled with LWRs waste

Energy Technology Data Exchange (ETDEWEB)

Talamo, Alberto E-mail: alby@neutron.kth.se; Gudowski, Waclaw E-mail: wacek@neutron.kth.se; Cetnar, Jerzy E-mail: jerzy@neutron.kth.se; Venneri, Francesco E-mail: venneri@lanl.gov

2004-11-01

We investigated some important neutronic features of the deep burn modular helium reactor (DB-MHR) using the MCNP/MCB codes. Our attention was focused on the neutron flux and its spectrum, capture to fission ratio of {sup 239}Pu and the temperature coefficient of fuel and moderator. The DB-MHR is a graphite-moderated helium-cooled reactor proposed by General Atomic to address the need for a fast and efficient incineration of plutonium for non-proliferation purposes as well as the management of light water reactors (LWRs) waste. In fact, recent studies have shown that the use of the DB-MHR coupled to ordinary LWRs would keep constant the world inventory of plutonium for a reactor fleet producing 400 TW{sub e}/y. In the present studies, the DB-MHR is loaded with Np-Pu driver fuel (DF) with an isotopic composition corresponding to LWRs spent fuel waste. DF uses fissile isotopes (e.g. {sup 239}Pu and {sup 241}Pu), previously generated in the LWRs, and maintains criticality conditions in the DB-MHR. After an irradiation of three years, the spent DF is reprocessed and its remaining actinides are manufactured into fresh transmutation fuel (TF). TF mainly contains non-fissile actinides which undergo neutron capture and transmutation during the subsequent three-year irradiation in the DB-MHR. At the same time, TF provides control and negative reactivity feedback to the reactor. After extraction of the spent TF, irradiated for three years, over 94% of {sup 239}Pu and 53% of all actinides coming from LWRs waste will have been destroyed in the DB-MHR. In this paper we look at the operation conditions at equilibrium for the DB-MHR and evaluate fluxes and reactivity responses using state of the art 3-D Monte Carlo simulations.

Location capability of a sparse regional network (RSTN) using a multi-phase earthquake location algorithm (REGLOC)

Energy Technology Data Exchange (ETDEWEB)

Hutchings, L.

1994-01-01

The Regional Seismic Test Network (RSTN) was deployed by the US Department of Energy (DOE) to determine whether data recorded by a regional network could be used to detect and accurately locate seismic events that might be clandestine nuclear tests. The purpose of this paper is to evaluate the location capability of the RSTN. A major part of this project was the development of the location algorithm REGLOC and application of Basian a prior statistics for determining the accuracy of the location estimates. REGLOC utilizes all identifiable phases, including backazimuth, in the location. Ninty-four events, distributed throughout the network area, detected by both the RSTN and located by local networks were used in the study. The location capability of the RSTN was evaluated by estimating the location accuracy, error ellipse accuracy, and the percentage of events that could be located, as a function of magnitude. The location accuracy was verified by comparing the RSTN results for the 94 events with published locations based on data from the local networks. The error ellipse accuracy was evaluated by determining whether the error ellipse includes the actual location. The percentage of events located was assessed by combining detection capability with location capability to determine the percentage of events that could be located within the study area. Events were located with both an average crustal model for the entire region, and with regional velocity models along with station corrections obtained from master events. Most events with a magnitude <3.0 can only be located with arrivals from one station. Their average location errors are 453 and 414 km for the average- and regional-velocity model locations, respectively. Single station locations are very unreliable because they depend on accurate backazimuth estimates, and backazimuth proved to be a very unreliable computation.

Terminal location planning in intermodal transportation with Bayesian inference method.

Science.gov (United States)

2014-01-01

In this project, we consider the planning of terminal locations for intermodal transportation systems. For a given number of potential terminals and coexisted multiple service pairs, we find the set of appropriate terminals and their locations that p...

Ethnographic Locations: The Geographies of Feminist Post-Structural Ethnography

Science.gov (United States)

Cairns, Kate

2013-01-01

The feminist post-structuralist emphasis on social location has yielded crucial insights within debates about power and reflexivity in educational research; however, spatial location is also at play in the formation of educational ethnographies. Reflecting upon various aspects of a research project with rural students in Ontario, Canada, this…

Economic evaluation of nuclear seawater desalination in an Algerian site: La Macta

International Nuclear Information System (INIS)

Belkaid, Abderrahmane; Amzert, Sid Ahmed; Arbaoui, Fahd; Bouaichaoui, Youcef

2010-01-01

As the needs for fresh water and electricity increases rapidly in Algeria, the Algerian authorities launched a study to assess the potentialities of the introduction of nuclear energy for the production of electricity and potable water. This study which started in 2007, is held under the framework of an IAEA Project untitled: 'techno-economic feasibility study of seawater desalination using nuclear energy' and its objective is to provide a document which will be used to support the government's decision to introduce the nuclear desalination in Algeria. To that end, one site has been selected to host nuclear desalination plant. This site is located in North West region of the country. In this study, we present the results achieved under this project and which corresponds to the economical evaluation of coupling several nuclear reactors: GT-MHR, PBMR, AP1000 and PWR900, with two desalination processes MED and RO. The results are compared with those obtained with fossil energy sources: Natural Gas Turbine and Natural Gas Combined Cycle. (author)

Population analysis relative to geothermal energy development, Imperial County, California

Energy Technology Data Exchange (ETDEWEB)

Pick, J.B.; Jung, T.H.; Butler, E.

1977-01-01

The historical and current population characteristics of Imperial County, California, are examined. These include vital rates, urbanization, town sizes, labor force composition, income, utility usage, and ethnic composition. Inferences are drawn on some of the important social and economic processes. Multivariate statistical analysis is used to study present relationships between variables. Population projections for the County were performed under historical, standard, and geothermal projection assumptions. The transferability of methods and results to other geothermal regions anticipating energy development is shown. (MHR)

State geothermal commercialization programs in ten Rocky Mountain states. Semi-annual progress report, July-December 1979

Energy Technology Data Exchange (ETDEWEB)

Griffith, J.L. (comp.)

1980-08-01

The activities and findings of the ten state teams participating in the Rocky Mountain Basin and Range Regional Hydrothermal Commercialization Program for the period are described. A summary of the state projects, compilation of project accomplishments, summary of findings, and a description of the major conclusions and recommendations are presented. Also included are chapters on the commercialization activities carried out by individual teams in each state: Arizona, Colorado, Idaho, Montana, Nevada, New-Mexico, North Dakota, South Dakota, Utah, and Wyoming. (MHR)

40 CFR 264.18 - Location standards.

Science.gov (United States)

2010-07-01

... consider them in planning the location of a facility to help prevent subsequent project delays.] (c) Salt dome formations, salt bed formations, underground mines and caves. The placement of any noncontainerized or bulk liquid hazardous waste in any salt dome formation, salt bed formation, underground mine or...

Location, location, location: Extracting location value from house prices

OpenAIRE

Kolbe, Jens; Schulz, Rainer; Wersing, Martin; Werwatz, Axel

2012-01-01

The price for a single-family house depends both on the characteristics of the building and on its location. We propose a novel semiparametric method to extract location values from house prices. After splitting house prices into building and land components, location values are estimated with adaptive weight smoothing. The adaptive estimator requires neither strong smoothness assumptions nor local symmetry. We apply the method to house transactions from Berlin, Germany. The estimated surface...

An evaluation of reactor cooling and coupled hydrogen production processes using the modular helium reactor

International Nuclear Information System (INIS)

Harvego, E.A.; Reza, S.M.M.; Richards, M.; Shenoy, A.

2006-01-01

The high-temperature characteristics of the modular helium reactor (MHR) make it a strong candidate for producing hydrogen using either thermochemical or high-temperature electrolysis (HTE) processes. Using heat from the MHR to drive a sulfur-iodine (SI) thermochemical hydrogen production process has been the subject of a U.S. Department of Energy sponsored Nuclear Engineering Research Initiative (NERI) project led by General Atomics, with participation from the Idaho National Laboratory (INL) and Texas A and M University. While the focus of much of the initial work was on the SI thermochemical production of hydrogen, recent activities included development of a preconceptual design for an integral HTE hydrogen production plant driven by the process heat and electricity produced by a 600 MW MHR. This paper describes ATHENA analyses performed to evaluate alternative primary system cooling configurations for the MHR to minimize peak reactor vessel and core temperatures while achieving core helium outlet temperatures in the range of 900-1000 deg. C that are needed for the efficient production of hydrogen using either the SI or HTE process. The cooling schemes investigated are intended to ensure peak fuel temperatures do not exceed specified limits under normal or transient upset conditions, and that reactor vessel temperatures do not exceed American Society of Mechanical Engineers (ASME) code limits for steady-state or transient conditions using standard light water reactor vessel materials. Preconceptual designs for SI and HTE hydrogen production plants driven by one or more 600 MW MHRs at helium outlet temperatures in the range of 900-1000 deg. C are described and compared. An initial SAPHIRE model to evaluate the reliability, maintainability, and availability of the SI hydrogen production plant is also described. Finally, a preliminary flowsheet for a conceptual design of an HTE hydrogen production plant coupled to a 600 MW modular helium reactor is presented and

Hydrothermal research and development assessment. Task Force report: projections for direct-heat applications

Energy Technology Data Exchange (ETDEWEB)

1982-04-01

Low and moderate temperature hydrothermal resources suitable for direct-heat applications have been identified in 37 states. The extent to which three resources might be used over the next 20 years were evaluated and the probable impact of Federal programs on hydrothermal resource utilization was assessed. The use types that comprise the bulk of the market were determined. Representative firms and municipalities were interviewed to determine their willingness to use hydrothermal energy, and to determine the investment decision criteria that would influence their actions. (MHR)

Harvard Project Physics Newsletter 10. The Project Physics Course, Text.

Science.gov (United States)

Harvard Univ., Cambridge, MA. Harvard Project Physics.

A short description of the availability of Harvard Project Physics course components is given as is a discussion of the growth of the use of Project Physics in schools, including some enrollment data and survey results. Locations of the 1970 and 1971 Summer Institutes are listed. Adaptations of Project Physics course outside the United States are…

MICROGRIDS: THE AGRIA TEST LOCATION

Directory of Open Access Journals (Sweden)

Aleksandra Krkoleva

2010-01-01

Full Text Available The paper presents the pilot Microgrid in Macedonia, developed within the framework of the MOREMICROGRIDS (EU EP6 projecet, contract No. SES6-019864 project. This Microgrid is the first of its kind being developed in the Western Balkan region and serves as pilot site for introduction and examination of the Microgrids concept in non European Union conditions. The test network consists of a part of the low voltage grid, located on a pig farm. The main electricity source for the Microgrid is a small biogas plant, which uses the biogas produced by a waste water treatment process. The paper addresses the Microgrid design, development of test scenarios and test results from the pilot location.

Examining the financial performance of micro-generation wind projects and the subsidy effect of feed-in tariffs for urban locations in the United Kingdom

International Nuclear Information System (INIS)

Walters, Ryan; Walsh, Philip R.

2011-01-01

This paper seeks to evaluate the effect of the upcoming 2010 UK Feed-in Tariff (UK FIT) on decentralised small wind-energy installations at the household and building level in urban locations. It is projected that the UK FIT will stimulate an unprecedented surge in building-mounted turbine installation. The tariff amount must stimulate incentive but mitigate the likelihood of distortions in the competitive electricity market. To analyse these issues, measured energy output from sites in the Warwick Wind Trials Project (WWTP) is converted into revenue in a net-present-value (NPV) framework for assessing commercial purchases of small wind systems. Variances in project variables are examined through NPV simulations using Monte Carlo analysis to capture permutations of small wind-project performance in the UK-with and without the UK FIT. Our research concludes that the proposed tariff amount of 30.5 p/kWh will not significantly boost the economic attractiveness of mildly selective (WWTP-based) sites in the UK. Furthermore, the fixed-tariff rate ( Pounds /kWh generated) could cause inefficiencies applied across uneven wind-resource distribution. The results of this study suggest further examination of policy related to micro-generation, in particular decentralised small wind projects. - Highlights: → Feed-in tariff (FIT) policy for urban UK small wind projects. → Determination of economic attractiveness (NPV) of projects. → Application of performance data from Warwick Wind Trials. → Need for higher tariff rate to provide average project with NPV>0. → Recommend reconsideration of FIT policy for urban small wind projects.

Fault Locating, Prediction and Protection (FLPPS)

Energy Technology Data Exchange (ETDEWEB)

Yinger, Robert, J.; Venkata, S., S.; Centeno, Virgilio

2010-09-30

One of the main objectives of this DOE-sponsored project was to reduce customer outage time. Fault location, prediction, and protection are the most important aspects of fault management for the reduction of outage time. In the past most of the research and development on power system faults in these areas has focused on transmission systems, and it is not until recently with deregulation and competition that research on power system faults has begun to focus on the unique aspects of distribution systems. This project was planned with three Phases, approximately one year per phase. The first phase of the project involved an assessment of the state-of-the-art in fault location, prediction, and detection as well as the design, lab testing, and field installation of the advanced protection system on the SCE Circuit of the Future located north of San Bernardino, CA. The new feeder automation scheme, with vacuum fault interrupters, will limit the number of customers affected by the fault. Depending on the fault location, the substation breaker might not even trip. Through the use of fast communications (fiber) the fault locations can be determined and the proper fault interrupting switches opened automatically. With knowledge of circuit loadings at the time of the fault, ties to other circuits can be closed automatically to restore all customers except the faulted section. This new automation scheme limits outage time and increases reliability for customers. The second phase of the project involved the selection, modeling, testing and installation of a fault current limiter on the Circuit of the Future. While this project did not pay for the installation and testing of the fault current limiter, it did perform the evaluation of the fault current limiter and its impacts on the protection system of the Circuit of the Future. After investigation of several fault current limiters, the Zenergy superconducting, saturable core fault current limiter was selected for

Integrated project support environments the ASPECT project

CERN Document Server

Brown, Alan W

1991-01-01

A major part of software engineering developments involve the use of computing tools which facilitate the management, maintenance, security, and building of long-scale software engineer projects. Consequently, there have been a proliferation of CASE tools and IPSES. This book looks at IPSES in general and the ASPECT project in particular, providing design and implementation details, as well as locating ASPECT in IPSE developments.Survey of integrated project support environments for more efficient software engineering**Description of a large scale IPSE--ASPECT**Evaluation of formal methods in

Commission decision on the Department of Water Resources' Application for Certification for the Bottle Rock Geothermal Project

Energy Technology Data Exchange (ETDEWEB)

1980-11-01

The Application for Certification for the construction of a 55 MW geothermal power plant and related facilities in Lake County was approved subject to terms identified in the Final Decision. The following are covered: findings on compliance with statutory site-certification requirements; final environmental impact report; procedural steps; evidentiary bases; need, environmental resources; public health and safety; plant and site safety and reliability; socioeconomic, land use, and cultural concerns, and transmission tap line. (MHR)

Texas geothermal R D and D program planning support document. Final report

Energy Technology Data Exchange (ETDEWEB)

Davis, R.J.; Conover, M.F.; Keeney, R.C.; Personett, M.L.; Richmann, D.L.

1981-08-28

Program planning support was provided by; developing a geothermal RD and D program structure, characterizing the status of geothermal RD and D through review of literature and interaction with the geothermal research community, developing a candidate list of future Texas geothermal projects, and prioritizing the candidate projects based on appropriate evaluation criteria. The method used to perform this study and the results thereof are presented. Summary reviews of selected completed and ongoing projects and summary descriptions and evaluations of the candidate RD and D projects ar provided. A brief discussion emerging federal RD and D policies is presented. References and independent project rankings by three of the GRP members are included. (MHR)

Accuracy Improvement of Real-Time Location Tracking for Construction Workers

Directory of Open Access Journals (Sweden)

Hyunsoo Kim

2018-05-01

Full Text Available Extensive research has been conducted on the real-time locating system (RTLS for tracking construction components, including workers, equipment, and materials, in order to improve construction performance (e.g., productivity improvement or accident prevention. In order to prevent safety accidents and make more sustainable construction job sites, the higher accuracy of RTLS is required. To improve the accuracy of RTLS in construction projects, this paper presents a RTLS using radio frequency identification (RFID. For this goal, this paper develops a location tracking error mitigation algorithm and presents the concept of using assistant tags. The applicability and effectiveness of the developed RTLS are tested under eight different construction environments and the test results confirm the system’s strong potential for improving the accuracy of real-time location tracking in construction projects, thus enhancing construction performance.

Narrative research on mental health recovery: two sister paradigms.

Science.gov (United States)

Spector-Mersel, Gabriela; Knaifel, Evgeny

2017-06-24

Despite the breadth of narrative studies on individuals with severe mental illness, the suitability of narrative inquiry to exploring mental health recovery (MHR) has not been examined. (1) Examining the appropriateness of narrative inquiry to studying MHR; (2) assessing the extent to which narrative studies on MHR conform to the unique features of narrative research, as a distinctive form of qualitative inquiry. Review of empirical, theoretical and methodological literature on recovery and narrative inquiry. Considering the perspectives of recovery and narrative as paradigms, the similarity between their ontology and epistemology is shown, evident in 10 common emphases: meaning, identity, change and development, agency, holism, culture, uniqueness, context, language and giving voice. The resemblance between these "sister" paradigms makes narrative methodology especially fruitful for accessing the experiences of individuals in recovery. Reviewing narrative studies on MHR suggests that, currently, narrative research's uniqueness, centered on the holistic principle, is blurred on the philosophical, methodological and textual levels. Well-established narrative research has major implications for practice and policy in recovery-oriented mental health care. The narrative inquiry paradigm offers a possible path to enhancing the distinctive virtues of this research, realizing its potential in understanding and promoting MHR.

TE-Locate: A Tool to Locate and Group Transposable Element Occurrences Using Paired-End Next-Generation Sequencing Data.

Science.gov (United States)

Platzer, Alexander; Nizhynska, Viktoria; Long, Quan

2012-09-12

Transposable elements (TEs) are common mobile DNA elements present in nearly all genomes. Since the movement of TEs within a genome can sometimes have phenotypic consequences, an accurate report of TE actions is desirable. To this end, we developed TE-Locate, a computational tool that uses paired-end reads to identify the novel locations of known TEs. TE-Locate can utilize either a database of TE sequences, or annotated TEs within the reference sequence of interest. This makes TE-Locate useful in the search for any mobile sequence, including retrotransposed gene copies. One major concern is to act on the correct hierarchy level, thereby avoiding an incorrect calling of a single insertion as multiple events of TEs with high sequence similarity. We used the (super)family level, but TE-Locate can also use any other level, right down to the individual transposable element. As an example of analysis with TE-Locate, we used the Swedish population in the 1,001 Arabidopsis genomes project, and presented the biological insights gained from the novel TEs, inducing the association between different TE superfamilies. The program is freely available, and the URL is provided in the end of the paper.

TE-Locate: A Tool to Locate and Group Transposable Element Occurrences Using Paired-End Next-Generation Sequencing Data

Directory of Open Access Journals (Sweden)

Quan Long

2012-09-01

Full Text Available Transposable elements (TEs are common mobile DNA elements present in nearly all genomes. Since the movement of TEs within a genome can sometimes have phenotypic consequences, an accurate report of TE actions is desirable. To this end, we developed TE-Locate, a computational tool that uses paired-end reads to identify the novel locations of known TEs. TE-Locate can utilize either a database of TE sequences, or annotated TEs within the reference sequence of interest. This makes TE-Locate useful in the search for any mobile sequence, including retrotransposed gene copies. One major concern is to act on the correct hierarchy level, thereby avoiding an incorrect calling of a single insertion as multiple events of TEs with high sequence similarity. We used the (superfamily level, but TE-Locate can also use any other level, right down to the individual transposable element. As an example of analysis with TE-Locate, we used the Swedish population in the 1,001 Arabidopsis genomes project, and presented the biological insights gained from the novel TEs, inducing the association between different TE superfamilies. The program is freely available, and the URL is provided in the end of the paper.

Solar energy system performance evaluation: Page Jackson Elementary School, Charles Town, West Virginia, October 1979-April 1980

Energy Technology Data Exchange (ETDEWEB)

Howard, R.G.

1980-01-01

This school in Charles Town, West Virginia is equipped with 11,215 ft/sup 2/ of PPG flat-plate collectors of which 69% operate. Two insulated tanks of 10,000 gal capacity provide heat storage. A natural gas fired boiler and a chiller augment the solar heating and cooling system. Collector failure was primarily responsible for the system supplying 23% rather than the projected 85% of the heating requirement. (MHR)

Solar cycle variations of magnetopause locations

Czech Academy of Sciences Publication Activity Database

Němeček, Z.; Šafránková, J.; Lopez, R. E.; Dušík, Š.; Nouzák, L.; Přech, J.; Šimůnek, Jiří; Shue, J.-H.

2016-01-01

Roč. 58, č. 2 (2016), s. 240-248 ISSN 0273-1177 R&D Projects: GA ČR(CZ) GA14-19376S Institutional support: RVO:68378289 Keywords : magnetopause location * F-10.7 flux * solar cycle * solar wind velocity Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 1.401, year: 2016 http://www.sciencedirect.com/science/article/pii/S0273117715007115

GPS location data enhancement in electronic traffic records.

Science.gov (United States)

2013-01-01

In this project we developed a new GPS-based Geographical Information Exchange : Framework (GIEF) to improve the correctness and accuracy of location data reported on : electronic police forms in Oklahoma. A second major goal was to provide a base le...

Nuclear systems of the future: international forum generation 4 and research and development projects at the Cea

International Nuclear Information System (INIS)

Carre, F.

2003-01-01

To advance nuclear energy to meet future energy needs, ten countries have agreed to develop a future generation of nuclear energy systems, known as Generation 4. A technology road map to guide the Generation 4 effort was begun. This document presents the goals for these nuclear systems and the research programs of the Cea on the gas technology, GT-MHR, VHTR and GFR and the other systems as sodium Fast Neutron reactors, supercritical water and space nuclear. (A.L.B.)

CFD Analysis of the Fuel Temperature in High Temperature Gas-Cooled Reactors

International Nuclear Information System (INIS)

In, W. K.; Chun, T. H.; Lee, W. J.; Chang, J. H.

2005-01-01

High temperature gas-cooled reactors (HTGR) have received a renewed interest as potential sources for future energy needs, particularly for a hydrogen production. Among the HTGRs, the pebble bed reactor (PBR) and a prismatic modular reactor (PMR) are considered as the nuclear heat source in Korea's nuclear hydrogen development and demonstration project. PBR uses coated fuel particles embedded in spherical graphite fuel pebbles. The fuel pebbles flow down through the core during an operation. PMR uses graphite fuel blocks which contain cylindrical fuel compacts consisting of the fuel particles. The fuel blocks also contain coolant passages and locations for absorber and control material. The maximum fuel temperature in the core hot spot is one of the important design parameters for both PBR and PMR. The objective of this study is to predict the fuel temperature distributions in PBR and PMR using a computational fluid dynamics(CFD) code, CFX-5. The reference reactor designs used in this analysis are PBMR400 and GT-MHR600

Geographical location as critical factor in design and planning for international projects; La localizacion geografica como factor critico en el diseno y planificacion de proyectos internacionales

Energy Technology Data Exchange (ETDEWEB)

Matranga, Mariana; Rawson, Carola; Pandolfi, Juan Martin; Guamantica, Diego; Eberle, Juan Manuel; Mastandrea, Martin [TECNA S.A., Buenos Aires (Argentina)

2004-07-01

The success of an international project is closely linked to the knowledge of the scene where the steps of construction, installation and operation will take place. In that sense, early consideration of geographic factors, socio-economic and environmental impact has proven to be determinant for the successful development of the phases of design, construction, transportation, assembly and operation. In the case of the Planta de Tratamiento de Gas Sabalo, taking into account the above factors not only enabled the efficient development of the various phases of the project, but also complete stages of assembly and start-up in twenty weeks. The Planta de Tratamiento de Gas Sabalo is located in the Chaco, region in the Bolivian jungle, and has a capacity of 13.4 MMSCMD gas specification, which makes the plant increased capacity in Bolivia and one of the highest capacity in South America. Companies in Brazil, Bolivia, Ecuador and Argentina were involved in the project, the latter in charge of its design, construction and management. Based on the experience of the project Sabalo, this article presents a series of lines especially applicable to international projects.

Web-based Project Reporting System

Data.gov (United States)

US Agency for International Development — Web-PRS is a web-based system that captures financial information and project status information that is sortable by geographical location, pillar, project type and...

24 CFR 266.200 - Eligible projects.

Science.gov (United States)

2010-04-01

... being collected at unassisted projects in the market area that are similar in amenities and location to... assistance agreement or the unit rents being collected at unassisted projects in the market that are similar... in § 266.5. (g) Elderly projects. Projects or parts of projects specifically designed for the use and...

Geothermal energy in Alaska: site data base and development status

Energy Technology Data Exchange (ETDEWEB)

Markle, D.

1979-04-01

The following are presented: the history of geothermal energy in Alaska; a history of Alaska land ownership; legal and institutional barriers; and economics. Development, the socio-economic and physical data concerning geothermal energy are documented by regions. The six regions presented are those of the present Alaska State Planning Activities and those of the Federal Land Use Commission. Site data summaries of the one hundred and four separate geothermal spring locations are presented by these regions. (MHR)

Geothermal energy in Montana: site data base and development status

Energy Technology Data Exchange (ETDEWEB)

Brown, K.E.

1979-11-01

A short description of the state's geothermal characteristics, economy, and climate is presented. A listing of the majority of the known hot springs is included. A discussion of present and projected demand is included. The results of the site specific studies are addressed within the state energy picture. Possible uses and process requirements of geothermal resources are discussed. The factors which influence geothermal development were researched and presented according to relative importance. (MHR)

Nuclear Reactor Power Monitoring Using Silicon Carbide Semiconductor Radiation Detectors

International Nuclear Information System (INIS)

Thomas Blue; Don Miller

2008-01-01

To provide a perspective for our accomplishments, all of the sub-tasks in Task 1 (as they were identified in the proposal) are listed, and a brief description of the subtasks is given. Task 1--Define Generation IV Reactor Power Monitoring Requirements. Task 1.1--The power monitoring requirements for the IRIS and GT-MHR will be evaluated. Parameters considered will include maximum power level uncertainty, response time, etc. Task 1.2--The optimum locations for power monitors will be selected for both the IRIS and GT-MHR. Factors to be considered will include the power monitoring requirements defined in Task 1.1 as well as expected detector sensitivity and the presence of gamma ray background. Task 1.3--Other applications and opportunities offered by SiC power monitors will be evaluated. The prospects for on-line fault identification and diagnosis using pulse height and pulse shape analysis will be explored. The use of miniature SiC detectors to define axial, azimuthal, and radial flux profiles will be investigated

Negotiated Boundaries: Conceptual Locations of Pregnancy and Childbirth

Science.gov (United States)

Houvouras, Shannon

2006-01-01

Dominant notions of reproduction perceive childbearing as physical processes that take place within womens bodies. This perception undermines non-physical components and removes men from the process. This project uses social constructionism to explore the locations women describe pregnancy and childbirth taking place in their childbearing…

DESIGN OF A REAL TIME REMOTE VEHICLE LOCATION SYSTEM

Directory of Open Access Journals (Sweden)

Ahmet Emir DİRİK

2004-02-01

Full Text Available In this study, a low-cost, real-time vehicle location system is developed. The vehicle location system includes three main modules, i.e. positioning, wireless communication and digital map modules. The positioning module used in location systems computes position of the mobile vehicle. These vehicle location data are transmitted through a wireless communication system to host. The host has a capability to monitor a fleet of vehicles by analyzing data collected from wireless communication system. In this project, mobile vehicle location positions can be computed in a range of 10m position error and by using these position data, its possible to monitor the fleet of mobile vehicles on a digital map in the observation and control center. In this study, vehicle analog mobile radios are used to establish wireless communication system. Thus, there is no need to use satellite or GSM systems for communication and a low-cost and high-performance vehicle location system is realized.

Reliable Location-Based Services from Radio Navigation Systems

Directory of Open Access Journals (Sweden)

Per Enge

2010-12-01

Full Text Available Loran is a radio-based navigation system originally designed for naval applications. We show that Loran-C’s high-power and high repeatable accuracy are fantastic for security applications. First, we show how to derive a precise location tag—with a sensitivity of about 20 meters—that is difficult to project to an exact location. A device can use our location tag to block or allow certain actions, without knowing its precise location. To ensure that our tag is reproducible we make use of fuzzy extractors, a mechanism originally designed for biometric authentication. We build a fuzzy extractor specifically designed for radio-type errors and give experimental evidence to show its effectiveness. Second, we show that our location tag is difficult to predict from a distance. For example, an observer cannot predict the location tag inside a guarded data center from a few hundreds of meters away. As an application, consider a location-aware disk drive that will only work inside the data center. An attacker who steals the device and is capable of spoofing Loran-C signals, still cannot make the device work since he does not know what location tag to spoof. We provide experimental data supporting our unpredictability claim.

Effect of Modified Pectin Molecules on the Growth of Bone Cells

NARCIS (Netherlands)

Kokkonen, H.E.; Ilvesaro, J.M.; Morra, M.; Schols, H.A.; Tuukkanen, J.

2007-01-01

The aim of this study was to investigate molecular candidates for bone implant nanocoatings, which could improve biocompatibility of implant materials. Primary rat bone cells and murine preosteoblastic MC3T3-E1 cells were cultured on enzymatically modified hairy regions (MHR-A and MHR-B) of apple

Location, location, location

NARCIS (Netherlands)

Anderson, S.P.; Goeree, J.K.; Ramer, R.

1997-01-01

We analyze the canonical location-then-price duopoly game with general log- concave consumer densities. A unique pure-strategy equilibrium to the two-stage game exists if the density is not "too asymmetric" and not "too concave." These criteria are satisfied by many commonly used densities.

Perspectives on Spatial Decision Support Concerning Location of Biogas Production

DEFF Research Database (Denmark)

Bojesen, Mikkel

in biogas production. This ambition requires that more than 20 new large scale centralised biogas plants are built. The location of these plants is associated with a number of externalities and uncertainties and the existing biogas sector struggles to establish itself as a viable energy producing sector....... Meanwhile planners and decision makers struggle to find sustainable locations that comprehensively balance the multiple concerns the location of biogas facilities includes. This PhD project examines how spatial decision support models can be used to ensure sustainable locations of future biogas plants......, understand the industrial economic aspects of such a role. Through the use of spatial multi-criteria evaluation models stakeholder preferences to decision criteria are included in a sustainable biogas facility location analysis. By the use of these models it is demonstrated how overall biogas production...

Overview of Opportunities for Co-Location of Solar Energy Technologies and Vegetation

Energy Technology Data Exchange (ETDEWEB)

Macknick, Jordan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Beatty, Brenda [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hill, Graham [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2013-12-01

Large-scale solar facilities have the potential to contribute significantly to national electricity production. Many solar installations are large-scale or utility-scale, with a capacity over 1 MW and connected directly to the electric grid. Large-scale solar facilities offer an opportunity to achieve economies of scale in solar deployment, yet there have been concerns about the amount of land required for solar projects and the impact of solar projects on local habitat. During the site preparation phase for utility-scale solar facilities, developers often grade land and remove all vegetation to minimize installation and operational costs, prevent plants from shading panels, and minimize potential fire or wildlife risks. However, the common site preparation practice of removing vegetation can be avoided in certain circumstances, and there have been successful examples where solar facilities have been co-located with agricultural operations or have native vegetation growing beneath the panels. In this study we outline some of the impacts that large-scale solar facilities can have on the local environment, provide examples of installations where impacts have been minimized through co-location with vegetation, characterize the types of co-location, and give an overview of the potential benefits from co-location of solar energy projects and vegetation. The varieties of co-location can be replicated or modified for site-specific use at other solar energy installations around the world. We conclude with opportunities to improve upon our understanding of ways to reduce the environmental impacts of large-scale solar installations.

A GIS approach for predicting prehistoric site locations.

Energy Technology Data Exchange (ETDEWEB)

Kuiper, J. A.; Wescott, K. L.

1999-08-04

Use of geographic information system (GIS)-based predictive mapping to locate areas of high potential for prehistoric archaeological sites is becoming increasingly popular among archaeologists. Knowledge of the environmental variables influencing activities of original inhabitants is used to produce GIS layers representing the spatial distribution of those variables. The GIS layers are then analyzed to identify locations where combinations of environmental variables match patterns observed at known prehistoric sites. Presented are the results of a study to locate high-potential areas for prehistoric sites in a largely unsurveyed area of 39,000 acres in the Upper Chesapeake Bay region, including details of the analysis process. The project used environmental data from over 500 known sites in other parts of the region and the results corresponded well with known sites in the study area.

Geothermal probabilistic cost study

Energy Technology Data Exchange (ETDEWEB)

Orren, L.H.; Ziman, G.M.; Jones, S.C.; Lee, T.K.; Noll, R.; Wilde, L.; Sadanand, V.

1981-08-01

A tool is presented to quantify the risks of geothermal projects, the Geothermal Probabilistic Cost Model (GPCM). The GPCM model is used to evaluate a geothermal reservoir for a binary-cycle electric plant at Heber, California. Three institutional aspects of the geothermal risk which can shift the risk among different agents are analyzed. The leasing of geothermal land, contracting between the producer and the user of the geothermal heat, and insurance against faulty performance are examined. (MHR)

Program planner's guide to geothermal development in California

Energy Technology Data Exchange (ETDEWEB)

Yen, W.W.S.; Chambers, D.M.; Elliott, J.F.; Whittier, J.P.; Schnoor, J.J.; Blachman, S.

1980-09-30

The resource base, status of geothermal development activities, and the state's energy flow are summarized. The present and projected geothermal share of the energy market is discussed. The public and private sector initiatives supporting geothermal development in California are described. These include legislation to provide economic incentives, streamline regulation, and provide planning assistance to local communities. Private sector investment, research, and development activities are also described. The appendices provide a ready reference of financial incentives. (MHR)

Error Analysis in the Joint Event Location/Seismic Calibration Inverse Problem

National Research Council Canada - National Science Library

Rodi, William L

2006-01-01

This project is developing new mathematical and computational techniques for analyzing the uncertainty in seismic event locations, as induced by observational errors and errors in travel-time models...

LOCATION DECISIONS OF MULTINATIONAL COMPANIES IN ROMANIA

Directory of Open Access Journals (Sweden)

Lucia P. BLĂJUȚ

2016-07-01

Full Text Available This paper investigates the location decisions of foreign direct investments by the most important global multinational companies in Romania. The study covers the top 100 multinational companies, according to Fortune and underline that all of them have the headquarters location in the United States. In particular, this analysis presents the distribution of global companies based on the main industry and major economic sectors. The first company, from the rank 100, that invests in our country is Exxon Mobil (the number two on the list and has numerous projects in petroleum refining industry in many other countries, because energy sector is one of the most important ones in the global economy.

The Location of Digital Ethnography

Directory of Open Access Journals (Sweden)

Dana M. Walker

2010-10-01

Full Text Available Qualitative researchers interested in digitally-located social and cultural practices have struggled with ways in which to design studies that can account for the digital aspect of cultural practices while also taking into account that those digital practices do not exist as separate (or separable in terms of our research from other social and cultural practices. As such, one of the primary and ongoing challenges facing internet-based ethnographic research is the question of how to construct the location of a project when the sites, technologically-mediated practices, and people we study exist and flow through a wider information ecology that is neither fixed nor can easily be located as “online” or “offline.” This is as much a methodological challenge as a theoretical one. If one accepts that a rigid distinction between online and offline makes little theoretical sense, then drawing a methodological line between online and offline only reifies such a dualism. While there is a developing body of internet-related ethnographic literature which is attempting to take into account the fluid nature of our information ecology (e.g. Burrell, 2009, Leander and McKim, 2003, Hine, 2007, we continue to operate on shifting ground. This article uses the case of my own work on city-specific discussion forums in Philadelphia, Pennsylvania to highlight the complexities of locating digital ethnographic work and also argue for the necessity of accounting for both movement and placed-ness.

Science Projects | Akron-Summit County Public Library

Science.gov (United States)

Hours & Locations Main Library Science & Technology Division Science Projects Science Projects Have fun with science experiments. Whether you need to do a project for a school science fair or you want to be a mad scientist, our Science Project Index and other resources can get you started. Find how

Conceptualizing, Designing, and Investigating Locative Media Use in Urban Space

Science.gov (United States)

Diamantaki, Katerina; Rizopoulos, Charalampos; Charitos, Dimitris; Kaimakamis, Nikos

This chapter investigates the social implications of locative media (LM) use and attempts to outline a theoretical framework that may support the design and implementation of location-based applications. Furthermore, it stresses the significance of physical space and location awareness as important factors that influence both human-computer interaction and computer-mediated communication. The chapter documents part of the theoretical aspect of the research undertaken as part of LOcation-based Communication Urban NETwork (LOCUNET), a project that aims to investigate the way users interact with one another (human-computer-human interaction aspect) and with the location-based system itself (human-computer interaction aspect). A number of relevant theoretical approaches are discussed in an attempt to provide a holistic theoretical background for LM use. Additionally, the actual implementation of the LOCUNET system is described and some of the findings are discussed.

Assessment of the magnitude of geographical variations in the duration of non-work-related sickness absence by individual and contextual factors.

Science.gov (United States)

Torá-Rocamora, Isabel; Martínez, José Miguel; Gimeno, David; Alberti, Constança; Jardí, Josefina; Manzanera, Rafael; Benavides, Fernando G; Delclos, George

2015-01-01

To examine variation in the duration of non-work-related sickness absence (NWRSA) across geographical areas and the degree to which this variation can be explained by individual and/or contextual factors. All first NWRSA episodes ending in 2007 and 2010 were analyzed. Individual (diagnosis, age, sex) and contextual factors (healthcare resources, socioeconomic factors) were analyzed to assess how much of the geographical variation was explained by these factors. Median NWRSA durations in quartiles were mapped by counties in Catalonia. Multilevel Cox proportional hazard regression models with episodes nested within counties were fitted to quantify the magnitude of this variation. The proportional change in variance (PCV), median hazard ratios (MHR) and interquartile hazard ratios (IHR) were calculated. We found a geographical pattern in the duration of NWRSA, with longer duration in northwestern Catalonia. There was a small, but statistically significant, geographical variation in the duration of NWRSA, which mostly decreased after adjustment for individual factors in both women (PCV=34.98%, MHR=1.09, IHR=1.13 in 2007; PCV=34.68%, MHR=1.11, IHR=1.28 in 2010) and men (PCV=39.88%, MHR=1.10, IHR=1.27 in 2007; PCV=45.93%, MHR=1.10, IHR=1.25 in 2010); only in the case of women in 2010 was there a reduction in county-level variance due to contextual covariates (PCV=16.18%, MHR=1.12, IHR=1.32). County-level variation in the duration of NWRSA was small and was explained more by individual than by contextual variables. Knowledge of geographic differences in NWRSA duration is needed to plan specific programs and interventions to minimize these differences. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

Environmental and economic effects of subsidence: Category 4, Project 1. Final report

Energy Technology Data Exchange (ETDEWEB)

Viets, V.F.; Vaughan, C.K.; Harding, R.C.

1979-05-01

A list of more than 70 subsidence areas was screened to select those areas which seemed to have the best potential for providing reliable data. The screening process is described in an appendix. Nine areas were selected for detailed case studies to collect all available data on the environmental and economic effects of the subsidence. Available information from the subsidence areas not selected as case studies was tabulated for each area and is included in an appendix. The nine case study areas are: Arizona; San Joaquin Valley, California; Baldwin Hills, California; Santa Clara Valley, California; Wilmington, California; Las Vegas Valley, Nevada; Houston-Galveston area, Texas; Mexico City, Mexico; and Wairakei, New Zealand. (MHR)

LLAMA Project

Science.gov (United States)

Arnal, E. M.; Abraham, Z.; Giménez de Castro, G.; de Gouveia dal Pino, E. M.; Larrarte, J. J.; Lepine, J.; Morras, R.; Viramonte, J.

2014-10-01

The project LLAMA, acronym of Long Latin American Millimetre Array is very briefly described in this paper. This project is a joint scientific and technological undertaking of Argentina and Brazil on the basis of an equal investment share, whose mail goal is both to install and to operate an observing facility capable of exploring the Universe at millimetre and sub/millimetre wavelengths. This facility will be erected in the argentinean province of Salta, in a site located at 4830m above sea level.

Potentialities of high temperature reactors (HTR)

International Nuclear Information System (INIS)

Hittner, D.

2001-01-01

This articles reviews the assets of high temperature reactors concerning the amount of radioactive wastes produced. 2 factors favors HTR-type reactors: high thermal efficiency and high burn-ups. The high thermal efficiency is due to the high temperature of the coolant, in the case of the GT-MHR project (a cooperation between General Atomic, Minatom, Framatome, and Fuji Electric) designed to burn Russian military plutonium, the expected yield will be 47% with an outlet helium temperature of 850 Celsius degrees. The high temperature of the coolant favors a lot of uses of the heat generated by the reactor: urban heating, chemical processes, or desalination of sea water.The use of a HTR-type reactor in a co-generating way can value up to 90% of the energy produced. The high burn-up is due to the technology of HTR-type fuel that is based on encapsulation of fuel balls with heat-resisting materials. The nuclear fuel of Fort-Saint-Vrain unit (Usa) has reached values of burn-ups from 100.000 to 120.000 MWj/t. It is shown that the quantity of unloaded spent fuel can be divided by 4 for the same amount of electricity produced, in the case of the GT-MHR project in comparison with a light water reactor. (A.C.)

Location based chat application for iPhone

Science.gov (United States)

Rana, Pradeep

With the increasing use of mobile devices everywhere in the world, there is a lack of social interaction between people. The objective of this thesis project is to create a location based chat application, which will help users to interact with other people around them. It will provide an opportunity to meet people when someone visits a new place. The app will use GPS coordinates of the user and will show him a list of other users based on his location. The user can then choose any of the other users from the list and start chatting with them. This app will consist of a frontend and backend. The frontend will be an iOS application and the backend will be a PHP/MYSQL server.

Geopressured-geothermal energy development: government incentives and institutional structures

Energy Technology Data Exchange (ETDEWEB)

Frederick, D.O.; Prestwood, D.C.L.; Roberts, K.; Vanston, J.H. Jr.

1979-01-01

The following subjects are included: a geothermal resource overview, the evolution of the current Texas geopressured-geothermal institutional structure, project evaluation with uncertainty and the structure of incentives, the natural gas industry, the electric utility industry, potential governmental participants in resource development, industrial users of thermal energy, current government incentives bearing on geopressured-geothermal development, six profiles for utilization of the geopressured-geothermal resources in the mid-term, and probable impacts of new government incentives on mid-term resource utilization profiles. (MHR)

Climate Ready Estuaries Partner Projects Map

Science.gov (United States)

CRE partners with the National Estuary Program to develop climate change projects in coastal U.S. areas, such as bays and harbors; to develop adaptation action plans, identify climate impacts and indicators, and more. This map shows project locations.

76 FR 22719 - Cape Wind Energy Project

Science.gov (United States)

2011-04-22

... Energy Project AGENCY: Bureau of Ocean Energy Management, Regulation and Enforcement (BOEMRE), Interior..., or disapprove a Construction and Operations Plan (COP) for the Cape Wind Energy Project located on..., easements, or rights-of-way for renewable energy projects on the OCS. The Secretary delegated that authority...

Industrial application of geothermal energy in Southeast Idaho

Energy Technology Data Exchange (ETDEWEB)

Batdorf, J.A.; McClain, D.W.; Gross, M.; Simmons, G.M.

1980-02-01

Those phosphate related and food processing industries in Southeastern Idaho are identified which require large energy inputs and the potential for direct application of geothermal energy is assessed. The total energy demand is given along with that fractional demand that can be satisfied by a geothermal source of known temperature. The potential for geothermal resource development is analyzed by examining the location of known thermal springs and wells, the location of state and federal geothermal exploration leases, and the location of federal and state oil and gas leasing activity in Southeast Idaho. Information is also presented regarding the location of geothermal, oil, and gas exploration wells in Southeast Idaho. The location of state and federal phosphate mining leases is also presented. This information is presented in table and map formats to show the proximity of exploration and development activities to current food and phosphate processing facilities and phosphate mining activities. (MHR)

Location, Location, Location: Does Place Provide the Opportunity for Differentiation for Universities?

Science.gov (United States)

Winter, Emma; Thompson-Whiteside, Helen

2017-01-01

The fiercely competitive HE market has led HEIs to invest significant resources in building a distinct identity. An HEI's location forms an inherent part of its identity and the uniqueness of location offers an opportunity to differentiate. However there has been limited examination of how location is used by HEIs and little consideration of how…

Poplar Island Environmental Restoration Project Nekton Data

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Poplar Island Environmental Restoration Project (PIERP) is a large scale 1,800 acres restoration project located in mid Chesapeake Bay. Fishery collections are...

Development of the Falea Polymetallic Uranium Project, Mali

International Nuclear Information System (INIS)

Ring, Bob; Freeman, Paul

2014-01-01

Falea project basics: • Project now owned by Denison Mines; • ANSTO Minerals working with owner and their consultant, DRA; • Located in south western Mali, West Africa, near the intersection of the Senegal and Guinea borders; • Established mining region (mainly gold); • Location on plateau favourable for underground operation; • Significant uranium, silver and copper mineralisation - different to other U deposits; • Excellent metallurical outcomes to date

Establishing a Dynamic Database of Blue and Fin Whale Locations from Recordings at the IMS CTBTO hydro-acoustic network. The Baleakanta Project

Science.gov (United States)

Le Bras, R. J.; Kuzma, H.

2013-12-01

Falling as they do into the frequency range of continuously recording hydrophones (15-100Hz), blue and fin whale songs are a significant source of noise on the hydro-acoustic monitoring array of the International Monitoring System (IMS) of the Comprehensive Nuclear Test Ban Treaty Organization (CTBTO). One researcher's noise, however, can be a very interesting signal in another field of study. The aim of the Baleakanta Project (www.baleakanta.org) is to flag and catalogue these songs, using the azimuth and slowness of the signal measured at multiple hydrophones to solve for the approximate location of singing whales. Applying techniques borrowed from human speaker identification, it may even be possible to recognize the songs of particular individuals. The result will be a dynamic database of whale locations and songs with known individuals noted. This database will be of great value to marine biologists studying cetaceans, as there is no existing dataset which spans the globe over many years (more than 15 years of data have been collected by the IMS). Current whale song datasets from other sources are limited to detections made on small, temporary listening devices. The IMS song catalogue will make it possible to study at least some aspects of the global migration patterns of whales, changes in their songs over time, and the habits of individuals. It is believed that about 10 blue whale 'cultures' exist with distinct vocal patterns; the IMS song catalogue will test that number. Results and a subset of the database (delayed in time to mitigate worries over whaling and harassment of the animals) will be released over the web. A traveling museum exhibit is planned which will not only educate the public about whale songs, but will also make the CTBTO and its achievements more widely known. As a testament to the public's enduring fascination with whales, initial funding for this project has been crowd-sourced through an internet campaign.

Analysis of how changed federal regulations and economic incentives affect financing of geothermal projects

Energy Technology Data Exchange (ETDEWEB)

Meyers, D.; Wiseman, E.; Bennett, V.

1980-11-04

The effects of various financial incentives on potential developers of geothermal electric energy are studied and the impact of timing of plant construction costs on geothermal electricity costs is assessed. The effect of the geothermal loan guarantee program on decisions by investor-owned utilities to build geothermal electric power plants was examined. The usefulness of additional investment tax credits was studied as a method for encouraging utilities to invest in geothermal energy. The independent firms which specialize in geothermal resource development are described. The role of municipal and cooperative utilities in geothermal resource development was assessed in detail. Busbar capital costs were calculated for geothermal energy under a variety of ownerships with several assumptions about financial incentives. (MHR)

75 FR 48986 - Northwest Area Water Supply Project, North Dakota

Science.gov (United States)

2010-08-12

... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Northwest Area Water Supply Project, North Dakota... Area Water Supply Project (NAWS Project), a Federal reclamation project, located in North Dakota. A... CONTACT: Alicia Waters, Northwest Area Water Supply Project EIS, Bureau of Reclamation, Dakotas Area...

75 FR 49518 - Northwest Area Water Supply Project, North Dakota

Science.gov (United States)

2010-08-13

... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Northwest Area Water Supply Project, North Dakota... Area Water Supply Project (NAWS Project), a Federal reclamation project, located in North Dakota. A... CONTACT: Alicia Waters, Northwest Area Water Supply Project EIS, Bureau of Reclamation, Dakotas Area...

Designing Android Based Augmented Reality Location-Based Service Application

Directory of Open Access Journals (Sweden)

Alim Hardiansyah

2018-01-01

Full Text Available Android is an operating system for Linux based smartphone. Android provides an open platform for the developers to create their own application. The most developed and used application now is location based application. This application gives personalization service for mobile device user and is customized to their location. Location based service also gives an opportunity for the developers to develop and increase the value of service. One of the technologies that could be combined with location based application is augmented reality. Augmented reality combines the virtual world with the real one. By the assistance of augmented reality, our surrounding environment could interact in digital form. Information of objects and environment surround us could be added to the augmented reality system and presented. Based on the background, the writers tried to implement those technologies on now rapidly developing android application as a final project to achieve bachelor degree in Department of Informatics Engineering, Faculty of Information Technology and Visual Communication, Al Kamal Science and Technology Institute. This application could be functioned to locate school by using location based service technology with the assistance of navigational applications such as waze and google maps, in form of live direction process through the smartphone

Location study of thermoelectric in Sao Paulo's State, Brazil

International Nuclear Information System (INIS)

Fadigas, Eliane Aparecida F.A.; Reis, Lineu Belico dos

1999-01-01

The article presents the results of studies developed to identify, locate and order thermoelectric generation options through costs increasing. This evaluation considered just options of Sao Paulo, a Brazilian state. The used methodology and the main parameters and variables which influence in the projects economic activity are introduced in the article. A software denominated SAEGET was also used

Warehouse location and freight attraction in the greater El Paso region.

Science.gov (United States)

2013-12-01

This project analyzes the current and future warehouse and distribution center locations along the El Paso-Juarez regions in the U.S.-Mexico border. This research seeks has developed a comprehensive database to aid in decision support process for ide...

The burnup capabilities of the Deep Burn Modular Helium Reactor analyzed by the Monte Carlo Continuous Energy Code MCB

Energy Technology Data Exchange (ETDEWEB)

Talamo, Alberto E-mail: alby@neutron.kth.se; Gudowski, Waclaw E-mail: wacek@neutron.kth.se; Venneri, Francesco E-mail: venneri@lanl.gov

2004-01-01

We have investigated the waste actinide burnup capabilities of a Gas Turbine Modular Helium Reactor (GT-MHR, similar to the reactor being designed by General Atomics and Minatom for surplus weapons plutonium destruction) with the Monte Carlo Continuous Energy Burnup Code MCB, an extension of MCNP developed at the Royal Institute of Technology in Stockholm and University of Mining and Metallurgy in Krakow. The GT-MHR is a gas-cooled, graphite-moderated reactor, which can be powered with a wide variety of fuels, like thorium, uranium or plutonium. In the present work, the GT-MHR is fueled with the transuranic actinides contained in Light Water Reactors (LWRs) spent fuel for the purpose of destroying them as completely as possible with minimum reliance on multiple reprocessing steps. After uranium extraction from the LWR spent fuel (UREX), the remaining waste actinides, including plutonium are partitioned into two distinct types of fuel for use in the GT-MHR: Driver Fuel (DF) and Transmutation Fuel (TF). The DF supplies the neutrons to maintain the fission chain reaction, whereas the TF emphasizes neutron capture to induce a deep burn transmutation and provide reactivity control by a negative feedback. When used in this mode, the GT-MHR is called Deep Burn Modular Helium Reactor (DB-MHR). Both fuels are contained in a structure of triple isotropic coated layers, TRISO coating, which has been proven to retain fission products up to 1600 deg. C and is expected to remain intact for hundreds of thousands of years after irradiation. Other benefits of this reactor consist of: a well-developed technology, both for the graphite-moderated core and the TRISO structure, a high energy conversion efficiency (about 50%), well established passive safety mechanism and a competitive cost. The destruction of more than 94% of {sup 239}Pu and the other geologically problematic actinide species makes this reactor a valid proposal for the reduction of nuclear waste and the prevention of

The burnup capabilities of the Deep Burn Modular Helium Reactor analyzed by the Monte Carlo Continuous Energy Code MCB

International Nuclear Information System (INIS)

Talamo, Alberto; Gudowski, Waclaw; Venneri, Francesco

2004-01-01

We have investigated the waste actinide burnup capabilities of a Gas Turbine Modular Helium Reactor (GT-MHR, similar to the reactor being designed by General Atomics and Minatom for surplus weapons plutonium destruction) with the Monte Carlo Continuous Energy Burnup Code MCB, an extension of MCNP developed at the Royal Institute of Technology in Stockholm and University of Mining and Metallurgy in Krakow. The GT-MHR is a gas-cooled, graphite-moderated reactor, which can be powered with a wide variety of fuels, like thorium, uranium or plutonium. In the present work, the GT-MHR is fueled with the transuranic actinides contained in Light Water Reactors (LWRs) spent fuel for the purpose of destroying them as completely as possible with minimum reliance on multiple reprocessing steps. After uranium extraction from the LWR spent fuel (UREX), the remaining waste actinides, including plutonium are partitioned into two distinct types of fuel for use in the GT-MHR: Driver Fuel (DF) and Transmutation Fuel (TF). The DF supplies the neutrons to maintain the fission chain reaction, whereas the TF emphasizes neutron capture to induce a deep burn transmutation and provide reactivity control by a negative feedback. When used in this mode, the GT-MHR is called Deep Burn Modular Helium Reactor (DB-MHR). Both fuels are contained in a structure of triple isotropic coated layers, TRISO coating, which has been proven to retain fission products up to 1600 deg. C and is expected to remain intact for hundreds of thousands of years after irradiation. Other benefits of this reactor consist of: a well-developed technology, both for the graphite-moderated core and the TRISO structure, a high energy conversion efficiency (about 50%), well established passive safety mechanism and a competitive cost. The destruction of more than 94% of 239 Pu and the other geologically problematic actinide species makes this reactor a valid proposal for the reduction of nuclear waste and the prevention of

Analyzing and Predicting Micro-Location Patterns of Software Firms

Directory of Open Access Journals (Sweden)

Jan Kinne

2017-12-01

Full Text Available While the effects of non-geographic aggregation on statistical inference are well studied in economics, research on the effects of geographic aggregation on regression analysis is rather scarce. This knowledge gap, together with the use of aggregated spatial units in previous firm location studies, results in a lack of understanding of firm location determinants at the microgeographic level. Suitable data for microgeographic location analysis has become available only recently through the emergence of Volunteered Geographic Information (VGI, especially the OpenStreetMap (OSM project, and the increasing availability of official (open geodata. In this paper, we use a comprehensive dataset of three million street-level geocoded firm observations to explore the location pattern of software firms in an Exploratory Spatial Data Analysis (ESDA. Based on the ESDA results, we develop a software firm location prediction model using Poisson regression and OSM data. Our findings offer novel insights into the mode of operation of the Modifiable Areal Unit Problem (MAUP in the context of a microgeographic location analysis: We find that non-aggregated data can be used to detect information on location determinants, which are superimposed when aggregated spatial units are analyzed, and that some findings of previous firm location studies are not robust at the microgeographic level. However, we also conclude that the lack of high-resolution geodata on socio-economic population characteristics causes systematic prediction errors, especially in cities with diverse and segregated populations.

[Effects of Three Industrial Organic Wastes as Amendments on Plant Growth and the Biochemical Properties of a Pb/Zn Mine Tailings].

Science.gov (United States)

Peng, Xi-zhu; Yang, Sheng-xiang; Li, Feng-mei; Cao, Jian-bing; Peng, Qing-jing

2016-01-15

A field trial was conducted in an abandoned Pb/Zn mine tailings to evaluate the effectiveness of three industrial wastes [sweet sorghum vinasse (SSV), medicinal herb residues (MHR) and spent mushroom compost (SMC)] as organic amendments on plant growth, soil nutrients and enzyme activities, and heavy metal concentrations in plant tissues and the mine tailings. (1) The main findings were as follows: (1) The mean concentrations of diethylene-triamine-pentaacetic acid (DTPA)-extractable Cd, Cu, Pb and Zn in SSV, MHR and SMC treatments decreased by 24.2%-27.3%, 45.7%-48.3%, 18.0%-20.9% and 10.1%-14.2% as compared to the control tailings. When compared to the control tailings, the mean values of organic matter, ammonium-N and available P in SSV, MHR and SMC treatments increased by 2.27-2.32, 12.4-12.8 and 4.04-4.74 times, respectively. Similarly, the addition of SSV, MHR and SMC significantly enhanced soil enzyme activities (dehydrogenase, beta-glucosidase, urease and phosphatase), being 5.51-6.37, 1.72-1.96, 6.32-6.62 and 2.35-2.62 times higher than those in the control tailings. (2) The application of these wastes promoted seed germination and seedling growth. The vegetation cover reached 84%, 79% and 86% at SSV, MHR and SMC subplots. For Lolium perenne and Cynodon dactylon, the addition of SSV, MHR and SMC led to significant increases in the shoot biomass yields with 4.2-5.6 and 15.7-17.3 times greater than those in the tailings. Moreover, the addition of SSV, MHR and SMC significantly reduced the concentrations of Cd, Cu, Pb and Zn in the shoots of L. perenne and C. dactylon in comparison with the control tailings. (3) Pearson's correlation coefficients showed that the vegetation cover and biomass were positively correlated with soil nutrient elements and enzyme activities. Significant negative correlations were observed between DTPA-extractable metal concentrations and vegetation cover and biomass. The metal concentrations in plants were positively correlated with

Catalog of Investment Projects in Bulgaria

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-10-15

This catalog includes information about 129 potential investment projects in Bulgaria and was developed by a team of experts from InvestBulgaria Agency in cooperation with municipalities and private companies. The document presents in brief general facts about the regions in Bulgaria. Projects are divided into the following categories: Tourism, Manufacturing, Urban Planning, Real Estate, Environment and renewable energy sources, Commerce, and Innovative and creative projects. The catalog provides detailed information about each project such as: status of the project, location, ownership, infrastructure, estimated value, contact information, etc.

CFD Analysis for Hot Spot Fuel Temperature of Deep-Burn Modular Helium Reactor

International Nuclear Information System (INIS)

Tak, Nam Il; Jo, Chang Keun; Jun, Ji Su; Kim, Min Hwan; Venneri, Francesco

2009-01-01

As an alternative concept of a conventional transmutation using fast reactors, a deep-burn modular helium reactor (DB-MHR) concept has been proposed by General Atomics (GA). Kim and Venneri published an optimization study on the DB-MHR core in terms of nuclear design. The authors concluded that more concrete evaluations are necessary including thermo-fluid and safety analysis. The present paper describes the evaluation of the hot spot fuel temperature of the fuel assembly in the 600MWth DB-MHR core under full operating power conditions. Two types of fuel shuffling scheme (radial and axial hybrid shuffling and axial-only shuffling) are investigated. For accurate thermo-fluid analysis, the computational fluid dynamics (CFD) analysis has been performed on a 1/12 fuel assembly using the CFX code

Downscaled projections of Caribbean coral bleaching that can inform conservation planning.

Science.gov (United States)

van Hooidonk, Ruben; Maynard, Jeffrey Allen; Liu, Yanyun; Lee, Sang-Ki

2015-09-01

Projections of climate change impacts on coral reefs produced at the coarse resolution (~1°) of Global Climate Models (GCMs) have informed debate but have not helped target local management actions. Here, projections of the onset of annual coral bleaching conditions in the Caribbean under Representative Concentration Pathway (RCP) 8.5 are produced using an ensemble of 33 Coupled Model Intercomparison Project phase-5 models and via dynamical and statistical downscaling. A high-resolution (~11 km) regional ocean model (MOM4.1) is used for the dynamical downscaling. For statistical downscaling, sea surface temperature (SST) means and annual cycles in all the GCMs are replaced with observed data from the ~4-km NOAA Pathfinder SST dataset. Spatial patterns in all three projections are broadly similar; the average year for the onset of annual severe bleaching is 2040-2043 for all projections. However, downscaled projections show many locations where the onset of annual severe bleaching (ASB) varies 10 or more years within a single GCM grid cell. Managers in locations where this applies (e.g., Florida, Turks and Caicos, Puerto Rico, and the Dominican Republic, among others) can identify locations that represent relative albeit temporary refugia. Both downscaled projections are different for the Bahamas compared to the GCM projections. The dynamically downscaled projections suggest an earlier onset of ASB linked to projected changes in regional currents, a feature not resolved in GCMs. This result demonstrates the value of dynamical downscaling for this application and means statistically downscaled projections have to be interpreted with caution. However, aside from west of Andros Island, the projections for the two types of downscaling are mostly aligned; projected onset of ASB is within ±10 years for 72% of the reef locations. © 2015 The Authors. Global Change Biology Published by John Wiley & Sons Ltd.

Public Transportation and Industrial Location Patterns in California

OpenAIRE

Chatman , Daniel; Xu, Ruoying; Park , Janice; Le, Kim

2016-01-01

Public transit investments are a large and growing share of all transportation investments in the state of California, and such critical investments should be evaluated partly on their economic benefits. Taking such benefits into account could alter investment, service, and service restructuring decisions taken by transit agencies in the state. The relationship of public transportation to economic productivity, and spatial patterns of industrial location, is understudied. This project investi...

ANTARES: The HTR/VHTR project at Framatome ANP

International Nuclear Information System (INIS)

Gauthier, Jean-Claude; Brinkmann, Gerd; Copsey, Bernie; Lecomte, Michel

2006-01-01

Framatome ANP is developing a very high temperature reactor (VHTR), relying on its previous experience with high temperature reactor concepts, from its participation in the MODUL and the GT-MHR designs. While being a major actor in the nuclear reactor business with proven light water technology, AREVA wishes to be ready to meet the new challenges calling for small grid requirements, high temperature process heat and cogeneration. The Framatome ANP VHTR design for electricity production is based on an indirect cycle coupled to an 'off-the-shelf' combined cycle gas turbine. Although direct cycle HTRs are being promoted for their high efficiency, preliminary evaluations show that the Framatome ANP design efficiency is on par with a direct cycle while avoiding power generation system (PGS) developments and keeping the PGS contamination free. Moreover, the nuclear heat source of the indirect cycle could also be used to meet the heat supplies from a standard design for multiple applications

An ERP assessment of hemispheric projections in foveal and extrafoveal word recognition.

Directory of Open Access Journals (Sweden)

Timothy R Jordan

Full Text Available BACKGROUND: The existence and function of unilateral hemispheric projections within foveal vision may substantially affect foveal word recognition. The purpose of this research was to reveal these projections and determine their functionality. METHODOLOGY: Single words (and pseudowords were presented to the left or right of fixation, entirely within either foveal or extrafoveal vision. To maximize the likelihood of unilateral projections for foveal displays, stimuli in foveal vision were presented away from the midline. The processing of stimuli in each location was assessed by combining behavioural measures (reaction times, accuracy with on-line monitoring of hemispheric activity using event-related potentials recorded over each hemisphere, and carefully-controlled presentation procedures using an eye-tracker linked to a fixation-contingent display. PRINCIPAL FINDINGS: Event-related potentials 100-150 ms and 150-200 ms after stimulus onset indicated that stimuli in extrafoveal and foveal locations were projected unilaterally to the hemisphere contralateral to the presentation hemifield with no concurrent projection to the ipsilateral hemisphere. These effects were similar for words and pseudowords, suggesting this early division occurred before word recognition. Indeed, event-related potentials revealed differences between words and pseudowords 300-350 ms after stimulus onset, for foveal and extrafoveal locations, indicating that word recognition had now occurred. However, these later event-related potentials also revealed that the hemispheric division observed previously was no longer present for foveal locations but remained for extrafoveal locations. These findings closely matched the behavioural finding that foveal locations produced similar performance each side of fixation but extrafoveal locations produced left-right asymmetries. CONCLUSIONS: These findings indicate that an initial division in unilateral hemispheric projections occurs in

An ERP Assessment of Hemispheric Projections in Foveal and Extrafoveal Word Recognition

Science.gov (United States)

Jordan, Timothy R.; Fuggetta, Giorgio; Paterson, Kevin B.; Kurtev, Stoyan; Xu, Mengyun

2011-01-01

Background The existence and function of unilateral hemispheric projections within foveal vision may substantially affect foveal word recognition. The purpose of this research was to reveal these projections and determine their functionality. Methodology Single words (and pseudowords) were presented to the left or right of fixation, entirely within either foveal or extrafoveal vision. To maximize the likelihood of unilateral projections for foveal displays, stimuli in foveal vision were presented away from the midline. The processing of stimuli in each location was assessed by combining behavioural measures (reaction times, accuracy) with on-line monitoring of hemispheric activity using event-related potentials recorded over each hemisphere, and carefully-controlled presentation procedures using an eye-tracker linked to a fixation-contingent display. Principal Findings Event-related potentials 100–150 ms and 150–200 ms after stimulus onset indicated that stimuli in extrafoveal and foveal locations were projected unilaterally to the hemisphere contralateral to the presentation hemifield with no concurrent projection to the ipsilateral hemisphere. These effects were similar for words and pseudowords, suggesting this early division occurred before word recognition. Indeed, event-related potentials revealed differences between words and pseudowords 300–350 ms after stimulus onset, for foveal and extrafoveal locations, indicating that word recognition had now occurred. However, these later event-related potentials also revealed that the hemispheric division observed previously was no longer present for foveal locations but remained for extrafoveal locations. These findings closely matched the behavioural finding that foveal locations produced similar performance each side of fixation but extrafoveal locations produced left-right asymmetries. Conclusions These findings indicate that an initial division in unilateral hemispheric projections occurs in foveal vision

CyberTEAM Interactive Epicenter Locator Tool

Science.gov (United States)

Ouyang, Y.; Hayden, K.; Lehmann, M.; Kilb, D.

2008-12-01

News coverage showing collapsed buildings, broken bridges and smashed cars help middle school students visualize the hazardous nature of earthquakes. However, few students understand how scientists investigate earthquakes through analysis of data collected using technology devices from around the world. The important findings by Muawia Barazangi and James Dorman in 1969 revealed how earthquakes charted between 1961 and 1967 delineated narrow belts of seismicity. This important discovery prompted additional research that eventually led to the theory of plate tectonics. When a large earthquake occurs, people from distances near and far can feel it to varying degrees. But how do scientists examine data to identify the locations of earthquake epicenters? The scientific definition of an earthquake: "a movement within the Earth's crust or mantle, caused by the sudden rupture or repositioning of underground material as they release stress" can be confusing for students first studying Earth science in 6th grade. Students struggle with understanding how scientists can tell when and where a rupture occurs, when the inner crust and mantle are not visible to us. Our CyberTEAM project provides 6th grade teachers with the opportunity to engage adolescents in activities that make textbooks come alive as students manipulate the same data that today's scientists use. We have developed an Earthquake Epicenter Location Tool that includes two Flash-based interactive learning objects that can be used to study basic seismology concepts and lets the user determine earthquake epicenters from current data. Through the Wilber II system maintained at the IRIS (Incorporated Research Institutions for Seismology) Web site, this project retrieves seismic data of recent earthquakes and makes them available to the public. Students choose an earthquake to perform further explorations. For each earthquake, a selection of USArray seismic stations are marked on a Google Map. Picking a station on the

A transportation-scheduling system for managing silvicultural projects

Science.gov (United States)

Jorge F. Valenzuela; H. Hakan Balci; Timothy McDonald

2005-01-01

A silvicultural project encompasses tasks such as sitelevel planning, regeneration, harvestin, and stand-tending treatments. an essential problem in managing silvicultural projects is to efficiently schedule the operations while considering project task due dates and costs of moving scarce resources to specific job locations. Transportation costs represent a...

14 CFR 152.109 - Project eligibility: Airport planning.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Project eligibility: Airport planning. 152....109 Project eligibility: Airport planning. (a) Airport master planning. A proposed project for airport master planning is not approved unless— (1) The location of the existing or proposed airport is included...

Market study for direct utilization of geothermal resources by selected sectors of economy

Energy Technology Data Exchange (ETDEWEB)

1980-08-01

A comprehensive analysis is presented of industrial markets potential for direct use of geothermal energy by a total of six industry sectors: food and kindred products; tobacco manufactures; textile mill products; lumber and wood products (except furniture); chemicals and allied products; and leather and leather products. A brief statement is presented regarding sectors of the economy and major manufacturing processes which can readily utilize direct geothermal energy. Previous studies on plant location determinants are summarized and appropriate empirical data provided on plant locations. Location determinants and potential for direct use of geothermal resources are presented. The data was gathered through interviews with 30 senior executives in the six sectors of economy selected for study. Probable locations of plants in geothermal resource areas and recommendations for geothermal resource marketing are presented. Appendix A presents factors which impact on industry location decisions. Appendix B presents industry executives interviewed during the course of this study. (MHR)

CAALYX: a new generation of location-based services in healthcare

Directory of Open Access Journals (Sweden)

Sdogati Claudio

2007-03-01

Full Text Available Abstract Recent advances in mobile positioning systems and telecommunications are providing the technology needed for the development of location-aware tele-care applications. This paper introduces CAALYX – Complete Ambient Assisted Living Experiment, an EU-funded project that aims at increasing older people's autonomy and self-confidence by developing a wearable light device capable of measuring specific vital signs of the elderly, detecting falls and location, and communicating automatically in real-time with his/her care provider in case of an emergency, wherever the older person happens to be, at home or outside.

Locative media and data-driven computing experiments

Directory of Open Access Journals (Sweden)

Sung-Yueh Perng

2016-06-01

Full Text Available Over the past two decades urban social life has undergone a rapid and pervasive geocoding, becoming mediated, augmented and anticipated by location-sensitive technologies and services that generate and utilise big, personal, locative data. The production of these data has prompted the development of exploratory data-driven computing experiments that seek to find ways to extract value and insight from them. These projects often start from the data, rather than from a question or theory, and try to imagine and identify their potential utility. In this paper, we explore the desires and mechanics of data-driven computing experiments. We demonstrate how both locative media data and computing experiments are ‘staged’ to create new values and computing techniques, which in turn are used to try and derive possible futures that are ridden with unintended consequences. We argue that using computing experiments to imagine potential urban futures produces effects that often have little to do with creating new urban practices. Instead, these experiments promote Big Data science and the prospect that data produced for one purpose can be recast for another and act as alternative mechanisms of envisioning urban futures.

Geology, Surficial, Neuse River Basin Mapping Project Core Locations �Äö?Ñ?¨ Ongoing project in Middle Coastal Plain to characterize geomorphology, surficial geology, and shallow aquifers and confining units; Excel spread sheet with core names, coordinates, and data co, Published in 2006, 1:24000 (1in=2000ft) scale, North Carolina Department of Environment and Natural Resources (DENR).

Data.gov (United States)

NSGIC State | GIS Inventory — Geology, Surficial dataset current as of 2006. Neuse River Basin Mapping Project Core Locations �Äö?Ñ?¨ Ongoing project in Middle Coastal Plain to characterize...

The Sudbury Neutrino Observatory project and the Kamiokande II project

International Nuclear Information System (INIS)

Beier, E.W.

1991-01-01

This document is a technical progress report on work performed at the University of Pennsylvania during the current year on the Sudbury Neutrino Observatory project and on the Kamiokande II project. The motivation for both experiments is the measurement of neutrinos emitted by the sun. The Kamiokande II experiment was an adaptation of an existing nucleon decay detector located in Japan to search for neutrinos emitted by the sun. It has been operational since 1986. Data taking was concluded in 1990 and work will terminate at the end of this grant year. The topics discussed in this report are: the Sudbury Neutrino Observatory project; photomultiplier tube measurements; photomultiplier bases; signal processing electronics; electronics system issues; software management and development; and Kamiokande II

Automated Vehicle Location (AVL) for Road Condition Reporting

OpenAIRE

McCullouch, Bob G.; Leung, Michelle; Kang, Wonjin

2009-01-01

This project developed an AVL system for INDOT that utilized the statewide wireless network, SAFE-T. This option was chosen after doing a cost analysis of commercial AVL systems that use cellular data communications. The system developed provides real time information collected during snow and ice removal. Information includes weather and road conditions, truck speed, amount of chemicals spread, time, location, plow position, and road temperature. This information is displayed on INDOT GIS ma...

The McClean Lake uranium project

International Nuclear Information System (INIS)

Blaise, J.R.

2001-01-01

The McClean Lake Uranium Project, located in the northern part of Saskatchewan, consists of five uranium deposits, Jeb - Sue A - Sue B - Sue C - McClean, scattered in three different locations on the mineral lease. On 16 March 1995, COGEMA Resources Inc and its partners, Denison Mines Ltd and OURD (Canada) Co Ltd, made the formal decision to develop the McClean Lake Project. Construction of the mine and mill started during summer 1995 and should be finished by mid 1997. Mining of the first deposit, Jeb started in 1996, ore being currently mined. The start of the yellowcake production is scheduled to start this fall. (author)

A GIS Application to Explore Postal Retail Outlet Locations

Directory of Open Access Journals (Sweden)

Nikola Trubint

2012-03-01

Full Text Available The use of GIS in solving a wide variety of problems in postal operations is expanding. This approach provides the development and usage of new methods in spatial data analysis, as support in achieving a better quality of the decision-making process. The use of location analysis model based on GIS software is implemented in solving the Belgrade postal retail outlet problem. One of the most important experiences of model implementation is that the local environmental conditions have a significant impact on strategic as well as operational approach. A portion of the material included in the paper has resulted from the Serbian PTT and CPC (Canada Post Corporation joint project Location Analysis.

Introduction to the Halden project and a short overview of the MMS activities at the project

International Nuclear Information System (INIS)

Owre, F.

2005-01-01

This presentation discusses the Man Machine System (MMS) research within the Halden Reactor Project located in Norway. This project is an International collaboration and the mission of this project is to improve safety at operating nuclear plants. The research activities include human reliability, knowledge management, design and evaluation of human system interfaces and control rooms, virtual reality for design, planning and training, operation and maintenance in a competitive electricity market as well as digital system safety research

The median hazard ratio: a useful measure of variance and general contextual effects in multilevel survival analysis.

Science.gov (United States)

Austin, Peter C; Wagner, Philippe; Merlo, Juan

2017-03-15

Multilevel data occurs frequently in many research areas like health services research and epidemiology. A suitable way to analyze such data is through the use of multilevel regression models (MLRM). MLRM incorporate cluster-specific random effects which allow one to partition the total individual variance into between-cluster variation and between-individual variation. Statistically, MLRM account for the dependency of the data within clusters and provide correct estimates of uncertainty around regression coefficients. Substantively, the magnitude of the effect of clustering provides a measure of the General Contextual Effect (GCE). When outcomes are binary, the GCE can also be quantified by measures of heterogeneity like the Median Odds Ratio (MOR) calculated from a multilevel logistic regression model. Time-to-event outcomes within a multilevel structure occur commonly in epidemiological and medical research. However, the Median Hazard Ratio (MHR) that corresponds to the MOR in multilevel (i.e., 'frailty') Cox proportional hazards regression is rarely used. Analogously to the MOR, the MHR is the median relative change in the hazard of the occurrence of the outcome when comparing identical subjects from two randomly selected different clusters that are ordered by risk. We illustrate the application and interpretation of the MHR in a case study analyzing the hazard of mortality in patients hospitalized for acute myocardial infarction at hospitals in Ontario, Canada. We provide R code for computing the MHR. The MHR is a useful and intuitive measure for expressing cluster heterogeneity in the outcome and, thereby, estimating general contextual effects in multilevel survival analysis. © 2016 The Authors. Statistics in Medicine published by John Wiley & Sons Ltd. © 2016 The Authors. Statistics in Medicine published by John Wiley & Sons Ltd.

Assessing Metabolic Syndrome Through Increased Heart Rate During Exercise

Directory of Open Access Journals (Sweden)

Masoumeh Sadeghi

2016-12-01

Full Text Available The present study aimed to assess changes in resting and maximum heart rates as primary indicators of cardiac autonomic function in metabolic syndrome (MetS patients and to determine their value for discriminating MetS from non-MetS. 468 participants were enrolled in this cross-sectional study and assessed according to the updated adult treatment panel III (ATP-III definition of MetS. Resting and maximum heart rates were recorded following the Bruce protocol during an exercise. A receiver operating characteristic (ROC curve was used to identify the best cutoff point for discriminating MetS from the non-MetS state. 194 participants (41.5% were diagnosed as MetS. The mean resting heart rate (RHR was not statistically different between the two groups (P=0.078. However, the mean maximum heart (MHR rate was considerably higher in participants with MetS (142.37±14.84 beats per min compared to the non-MetS group (134.62±21.63 beats per min (P<0.001. In the MetS group, the MHR was positively correlated with the serum triglyceride level (β=0.185, P=0.033 and was inversely associated with age (β=-0.469, P<0.001. The MHR had a moderate value for discriminating MetS from the non-MetS state (c=0.580, P=0.004 with the optimal cutoff point of 140 beats per min. In MetS patients, the MHR was significantly greater compared to non-MetS subjects and was directly correlated with serum triglyceride levels and inversely with advanced age. Moreover, MHR can be used as a suspicious indicator for identifying MetS.

Assessing Metabolic Syndrome Through Increased Heart Rate During Exercise.

Science.gov (United States)

Sadeghi, Masoumeh; Gharipour, Mojgan; Nezafati, Pouya; Shafie, Davood; Aghababaei, Esmaeil; Sarrafzadegan, Nizal

2016-11-01

The present study aimed to assess changes in resting and maximum heart rates as primary indicators of cardiac autonomic function in metabolic syndrome (MetS) patients and to determine their value for discriminating MetS from non-MetS. 468 participants were enrolled in this cross-sectional study and assessed according to the updated adult treatment panel III (ATP-III) definition of MetS. Resting and maximum heart rates were recorded following the Bruce protocol during an exercise. A receiver operating characteristic (ROC) curve was used to identify the best cutoff point for discriminating MetS from the non-MetS state. 194 participants (41.5%) were diagnosed as MetS. The mean resting heart rate (RHR) was not statistically different between the two groups (P=0.078). However, the mean maximum heart (MHR) rate was considerably higher in participants with MetS (142.37±14.84 beats per min) compared to the non-MetS group (134.62±21.63 beats per min) (P<0.001). In the MetS group, the MHR was positively correlated with the serum triglyceride level (β=0.185, P=0.033) and was inversely associated with age (β=-0.469, P<0.001). The MHR had a moderate value for discriminating MetS from the non-MetS state (c=0.580, P=0.004) with the optimal cutoff point of 140 beats per min. In MetS patients, the MHR was significantly greater compared to non-MetS subjects and was directly correlated with serum triglyceride levels and inversely with advanced age. Moreover, MHR can be used as a suspicious indicator for identifying MetS.

Comparison of migration-based location and detection methods for microseismic events

Czech Academy of Sciences Publication Activity Database

Trojanowski, J.; Eisner, Leo

2017-01-01

Roč. 65, č. 1 (2017), s. 47-63 ISSN 0016-8025 R&D Projects: GA ČR GAP210/12/2451 Institutional support: RVO:67985891 Keywords : migration * location * microseismicity Subject RIV: DC - Siesmology, Volcanology, Earth Structure OBOR OECD: Geology Impact factor: 1.846, year: 2016

Honey Lake Geothermal Project, Lassen County, California

Science.gov (United States)

1984-11-01

The drilling, completion, and testing of deep well WEN-2 for a hybrid electric power project which will use the area's moderate temperature geothermal fluids and locally procured wood fuel is reported. The project is located within the Wendel-Amedee Known Geothermal Resource Area.

A Location Privacy Aware Friend Locator

DEFF Research Database (Denmark)

Siksnys, Laurynas; Thomsen, Jeppe Rishede; Saltenis, Simonas

2009-01-01

to trade their location privacy for quality of service, limiting the attractiveness of the services. The challenge is to develop a communication-efficient solution such that (i) it detects proximity between a user and the user’s friends, (ii) any other party is not allowed to infer the location of the user...

Direct use applications of geothermal resources at Desert Hot Springs, California. Final report, May 23, 1977--July 31, 1978. Volume II: appendixes

Energy Technology Data Exchange (ETDEWEB)

Christiansen, C.C.

1978-07-01

The following appendixes are included: Desert Hot Springs (DHS) Geothermal Project Advisory Board, Geothermal Citizens Advisory Committee, community needs assessment, geothermal resource characterization, a detailed discussion of the geothermal applications considered for DHS, space/water heating, agricultural operations, detailed analysis of a geothermal aquaculture facility, detailed discussion of proposed energy cascading systems for DHS, regulatory requirements, environmental impact assessment, resource management plan, and geothermal resources property rights and powers of cities to regulate indigenous geothermal resources and to finance construction of facilities for utilization of such resources. (MHR)

Occidental Geothermal, Inc. , Oxy geothermal power plant No. 1. Final environmental impact report

Energy Technology Data Exchange (ETDEWEB)

1981-12-01

The project-specific environmental analysis covers the following: geology, soils, water resources, biology, air quality, noise, waste management, health, safety, transportation, energy and material resources, cultural resources, socioeconomics, public services, land use, and aesthetics. Other topics covered are: the cumulative envionmental analysis; unavoidable significant adverse environmental effects; irreversible environmental changes and irretrievable commitments of energy and materials; the relationship between local short-term uses of man's environment and the maintenance and enhancement of long-term productivity; growth-inducing impacts; and alternatives to the proposed action. (MHR)

Demonstration of the Robotic Gamma Locating and Isotopic Identification Device

International Nuclear Information System (INIS)

Anderson, M.O.; Conner, C.C.; Daniel, V.E.; McKay, M.D.; Yancey, N.A.

2002-01-01

The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in decontaminating and decommissioning nuclear facilities. To this end, the Deactivation and Decommissioning Focus Area of DOE's Office of Science and Technology sponsors Large-Scale Demonstration and Deployment Projects (LSDDP) to test new technologies. As part of these projects, developers and vendors showcase new products designed to decrease health and safety risks to personnel and the environment, increase productivity, and lower costs. As part of the FY 2000 and 2001 LSDDP, the Idaho National Engineering and Environmental Laboratory (INEEL) collaborated with the Russian Research and Development Institute of Construction Technology (NIKIMT). This collaboration resulted in the development of the Robotic Gamma Locating and Isotopic Identification Device (RGL and IID) which integrated DOE Robotics Crosscutting (Rbx) technology with NIKIMT Russian gamma locating and isotopic identification technology. This paper will discuss the technologies involved in this integration and results from the demonstration including reduction of personnel exposure, increase in productivity, and reduced risk

Locating Longitudinal Respondents After a 50-Year Hiatus

Directory of Open Access Journals (Sweden)

Stone Celeste

2014-06-01

Full Text Available Many longitudinal and follow-up studies face a common challenge: locating study participants. This study examines the extent to which a geographically dispersed subsample of participants can be relocated after 37 to 51 years of noncontact. Relying mostly on commercially available databases and administrative records, the 2011-12 Project Talent Follow-up Pilot Study (PTPS12 located nearly 85 percent of the original sample members, many of whom had not participated in the study since 1960. This study uses data collected in the base year to examine which subpopulations were the hardest to find after this extended hiatus. The results indicate that females were located at significantly lower rates than males. As expected, sample members with lower cognitive abilities were among the hardest-to-reach subpopulations. We next evaluate the extent to which biases introduced during the tracking phase can be minimized by using the multivariate chi-square automatic interaction detection (CHAID technique to calculate tracking loss adjustments. Unlike a 1995 study that found that these adjustments reduced statistical biases among its sample of located females, our results suggest that statistical adjustments were not as effective in PTPS12, where many participants had not been contacted in nearly 50 years and the tracking rates varied so greatly across subgroups.

Concentrating Solar Power Projects - Khi Solar One | Concentrating Solar

Science.gov (United States)

Power | NREL Khi Solar One This page provides information on Khi Solar One, a concentrating solar power (CSP) project, with data organized by background, parcipants and power plant configuration . Status Date: February 8, 2016 Project Overview Project Name: Khi Solar One Country: South Africa Location

The European XFEL project

International Nuclear Information System (INIS)

Floettmann, K.

2005-01-01

The European XFEL project is a 4th generation synchrotron radiation facility based on the SASE FEL concept and the superconducting TESLA technology for a linear accelerator. In February 2003 the German government decided that the XFEL should be realized as a European project and be located at DESY in Hamburg. The paper will give an overview of the overall layout and parameters of the facility, with emphasis on the accelerator design, technology and physics. (author)

Enhanced oil recovery projects data base

Energy Technology Data Exchange (ETDEWEB)

Pautz, J.F.; Sellers, C.A.; Nautiyal, C.; Allison, E.

1992-04-01

A comprehensive enhanced oil recovery (EOR) project data base is maintained and updated at the Bartlesville Project Office of the Department of Energy. This data base provides an information resource that is used to analyze the advancement and application of EOR technology. The data base has extensive information on 1,388 EOR projects in 569 different oil fields from 1949 until the present, and over 90% of that information is contained in tables and graphs of this report. The projects are presented by EOR process, and an index by location is provided.

Electronic Resources Management Project Presentation 2012

KAUST Repository

Ramli, Rindra M.

2012-11-05

This presentation describes the electronic resources management project undertaken by the KAUST library. The objectives of this project is to migrate information from MS Sharepoint to Millennium ERM module. One of the advantages of this migration is to consolidate all electronic resources into a single and centralized location. This would allow for better information sharing among library staff.

Locative media

CERN Document Server

Wilken, Rowan

2014-01-01

Not only is locative media one of the fastest growing areas in digital technology, but questions of location and location-awareness are increasingly central to our contemporary engagements with online and mobile media, and indeed media and culture generally. This volume is a comprehensive account of the various location-based technologies, services, applications, and cultures, as media, with an aim to identify, inventory, explore, and critique their cultural, economic, political, social, and policy dimensions internationally. In particular, the collection is organized around the perception that the growth of locative media gives rise to a number of crucial questions concerning the areas of culture, economy, and policy.

Battleground Energy Recovery Project

Energy Technology Data Exchange (ETDEWEB)

Bullock, Daniel [USDOE Gulf Coast Clean Energy Application Center, Woodlands, TX (United States)

2011-12-31

In October 2009, the project partners began a 36-month effort to develop an innovative, commercial-scale demonstration project incorporating state-of-the-art waste heat recovery technology at Clean Harbors, Inc., a large hazardous waste incinerator site located in Deer Park, Texas. With financial support provided by the U.S. Department of Energy, the Battleground Energy Recovery Project was launched to advance waste heat recovery solutions into the hazardous waste incineration market, an area that has seen little adoption of heat recovery in the United States. The goal of the project was to accelerate the use of energy-efficient, waste heat recovery technology as an alternative means to produce steam for industrial processes. The project had three main engineering and business objectives: Prove Feasibility of Waste Heat Recovery Technology at a Hazardous Waste Incinerator Complex; Provide Low-cost Steam to a Major Polypropylene Plant Using Waste Heat; and Create a Showcase Waste Heat Recovery Demonstration Project.

Break location influence in pressure vessel SBLOCA scenarios

Energy Technology Data Exchange (ETDEWEB)

Querol, Andrea; Gallardo, Sergio; Verdú, Gumersindo, E-mail: anquevi@upv.es, E-mail: sergalbe@iqn.upv.es, E-mail: gverdu@iqn.upv.es [Instituto Universitario de Seguridad Industrial, Radiofísica y Medioambiental (ISIRYM), Universitat Politècnica de València (Spain)

2017-07-01

The inspections performed in Davis Besse and in the South Texas Project Unit-I reactors pointed out safety issues regarding the structural integrity of the Pressure Vessel (PV). In these inspections, two anomalies were found: a wall thinning and degradation in the PV upper head of the Davis Besse reactor and a small amount of residue around of two instrument-tube penetration nozzles located in the PV lower plenum of the South Texas Project Unit-I reactor. The evolution of these defects could have resulted in Small Break Loss-Of-Coolant Accidents (SBLOCA) if they had not been detected in time. In this frame, the OECD/NEA considered the necessity to simulate these accidental sequences in the OECD/NEA ROSA Project using the Large Scale Test Facility (LSTF). This work is focused in simulating different hypothetical accidental scenarios in the PV using the thermalhydraulic code TRACE5. These simulations allow studying the break localization influence in the transient and the effectiveness of the accident management (AM) actions considered mitigating the consequences of these hypothetical accidental scenarios. (author)

Location Based Services for Outdoor Ecological Learning System: Design and Implementation

Science.gov (United States)

Hsiao, Hsien-Sheng; Lin, Chih-Cheng; Feng, Ruei-Ting; Li, Kun Jing

2010-01-01

This paper aimed to demonstrate how location-based services were implemented in ubiquitous outdoor ecological learning system. In an elementary school in northern Taiwan, two fifth grade classes on an ecology project were randomly selected: The experimental group could access the ecological learning system on hand-held devices while the control…

System engineering at the MEGARA project

Science.gov (United States)

Pérez-Calpena, A.; García-Vargas, María. Luisa; Gil de Paz, A.; Gallego Maestro, J.; Carrasco Licea, E.; Sánchez Moreno, F.; Iglesias-Páramo, J.

2014-08-01

MEGARA (Multi-Espectrógrafo en GTC de Alta Resolución para Astronomía) is a facility instrument of the 10.4m GTC (La Palma, Spain) working at optical wavelengths that provides both Integral-Field Unit (IFU) and Multi- Object Spectrograph (MOS) capabilities at resolutions in the range R=6,000-20,000. The MEGARA focal plane subsystems are located at one of the GTC focal stations, while the MEGARA refractive VPH based spectrograph is located at one of the Nasmyth platforms. The fiber bundles conduct the light from the focal plane subsystems to the pseudo-slits at the entrance of the spectrograph. The project is an initiative led by Universidad Complutense de Madrid (Spain) in collaboration with INAOE (Mexico), IAA-CSIC (Spain) and Universidad Politécnica de Madrid (Spain) and is developed under contract with GRANTECAN. The project is carried out by a multidisciplinary and geographically distributed team, which includes the in-kind contributions of the project partners and personnel from several private companies. The MEGARA system-engineering plan has been tailored to the project and is being applied to ensure the technical control of the project in order to finally meet the science high-level requirements and GTC constrains.

PHYTOREMEDIATION OF TPH IN SOILS: AN RTDF PROJECT

Science.gov (United States)

The Remediation Technology Development Forum has undertaken a project to investigate the use of plants in remediation of sites contaminated by petroleum hydrocarbons. Since sites have been established at a number of locations the project will be able to consider climate, contain...

AE source location by neural networks with arrival time profiles

Czech Academy of Sciences Publication Activity Database

Chlada, Milan; Blaháček, Michal; Převorovský, Zdeněk

2009-01-01

Roč. 19, č. 2 (2009), s. 4-4 ISSN 1213-3825. [NDT in PROGRESS. 12.11.2009-14.11.2009, Praha] R&D Projects: GA ČR GA101/07/1518; GA ČR GA106/07/1393 Institutional research plan: CEZ:AV0Z20760514 Keywords : acoustic emission * source location * artificial neural networks Subject RIV: BI - Acoustics www.cndt.cz

Long Frontal Projections Help Battus philenor (Lepidoptera: Papilionidae) Larvae Find Host Plants.

Science.gov (United States)

Kandori, Ikuo; Tsuchihara, Kazuko; Suzuki, Taichi A; Yokoi, Tomoyuki; Papaj, Daniel R

2015-01-01

Animals sometimes develop conspicuous projections on or near their heads as, e.g., weaponry, burrowing or digging tools, and probes to search for resources. The frontal projections that insects generally use to locate and assess resources are segmented appendages, including antennae, maxillary palps, and labial palps. There is no evidence to date that arthropods, including insects, use projections other than true segmental appendages to locate food. In this regard, it is noteworthy that some butterfly larvae possess a pair of long antenna-like projections on or near their heads. To date, the function of these projections has not been established. Larvae of pipevine swallowtail butterflies Battus philenor (Papilionidae) have a pair of long frontal fleshy projections that, like insect antennae generally, can be actively moved. In this study, we evaluated the possible function of this pair of long moveable frontal projections. In laboratory assays, both frontal projections and lateral ocelli were shown to increase the frequency with which search larvae found plants. The frontal projections increased finding of host and non-host plants equally, suggesting that frontal projections do not detect host-specific chemical cues. Detailed SEM study showed that putative mechanosensillae are distributed all around the frontal as well as other projections. Taken together, our findings suggest that the frontal projections and associated mechanosensillae act as vertical object detectors to obtain tactile information that, together with visual information from lateral ocelli and presumably chemical information from antennae and mouthparts, help larvae to find host plants. Field observations indicate that host plants are small and scattered in southern Arizona locations. Larvae must therefore find multiple host plants to complete development and face significant challenges in doing so. The frontal projections may thus be an adaptation for finding a scarce resource before starving to

Location of Urban Logistic Terminals as Hub Location Problem

Directory of Open Access Journals (Sweden)

Jasmina Pašagić Škrinjar

2012-09-01

Full Text Available In this paper the problems of locating urban logistic terminals are studied as hub location problems that due to a large number of potential nodes in big cities belong to hard non-polynomial problems, the so-called NP-problems. The hub location problems have found wide application in physical planning of transport and telecommunication systems, especially systems of fast delivery, networks of logistic and distribution centres and cargo traffic terminals of the big cities, etc. The paper defines single and multiple allocations and studies the numerical examples. The capacitated single allocation hub location problems have been studied, with the provision of a mathematical model of selecting the location for the hubs on the network. The paper also presents the differences in the possibilities of implementing the exact and heuristic methods to solve the actual location problems of big dimensions i.e. hub problems of the big cities.

Baltic NPP Project specifics and current status

International Nuclear Information System (INIS)

2011-01-01

Project overview: 2 x 1194 MW Units (AES-2006 series); Location in Kaliningrad region of the; Russian Federation; Operation dates: Unit 1 – Oct 2016; Unit 2 – Apr 2018; Site preparatory works ongoing. This is first NPP project in the Russian Federation providing opportunity for participation of foreign investors. Foreign investors may acquire up to 49% share. Cross-border transmission lines developed under separate project with participation of foreign investors. Conclusion: At the selected set of assumptions, the project is financially feasible in all scenarios

The determinants of the location of foreign direct investment in UK regions

NARCIS (Netherlands)

Dimitropoulou, Dimitra; McCann, Philip; Burke, Simon P.

2013-01-01

This article employs a database of over 2000 observations of Foreign Direct Investment (FDI) projects in UK regions. We analyse this data by means of various multinomial and conditional logit models in order to identify the major determinants of the location choices of these inward investments.

Pingston hydroelectric project - stage 2 project report : volume 1 of 2

International Nuclear Information System (INIS)

1999-01-01

The British Columbia Environmental Assessment Office has reviewed an application by Canadian Hydro Developers (B.C.) Inc., to develop the Pingston Hydroelectric Project, a run-of-river facility, located 60 km south of Revelstoke, British Columbia. The review includes an evaluation of any social and environmental impacts, including the effects on migratory birds, small mammals, amphibians, fish, wildlife, water quality, noise and visual aspects, that would be associated with the project. One consideration in selecting the project site was its ease of access along existing roadways and close proximity to power lines, another, the absence of any potential effects on fish and fish habitat. The project is also expected to have a negligible effect on water quality- related matters such as sediment transport, nutrient trapping in the headpond, and movement of large organic debris through the system. The project will not impact on archaeological resources, offers a renewable supply of energy and represents an overall positive effect on air quality for British Columbia. BC Hydro has committed to providing electrical interconnection to the main grid. 9 refs., 5 tabs., 14 figs., 9 appendices

Location, location, location: does early cancer in Barrett's esophagus have a preference?

Science.gov (United States)

Enestvedt, Brintha K; Lugo, Ricardo; Guarner-Argente, Carlos; Shah, Pari; Falk, Gary W; Furth, Emma; Ginsberg, Gregory G

2013-09-01

Early cancer (high-grade dysplasia [HGD] and intramucosal carcinoma [ImCa]) associated with Barrett's esophagus (BE) may have a circumferential spatial predilection. To describe the esophageal circumferential location of early cancer in BE. Retrospective study, single tertiary referral center. One hundred nineteen patients were referred for endoscopic eradication therapy for early cancer associated with BE. Endoscopic images and reports and pathology were reviewed. Circumferential location designation of early cancer in BE by using a clock-face orientation. One hundred nineteen of 131 patients referred for endoscopic eradication therapy had a location designation for their advanced histology (91.9%). There were a total of 57 patients (47.9%) with HGD and 62 patients (52.1%) with ImCa. There was a significantly higher rate of early cancer (HGD or ImCa) in the right hemisphere (12 to 6 o'clock location) compared with the left hemisphere (84.9% vs 15.1%, P cancer was found in the 12 to 3 o'clock quadrant (64.7%); 71.9% of HGD and 58.1% of ImCa lesions were located in the 12 to 3 o'clock quadrant. Retrospective design, single center. Early cancer associated with BE is far more commonly found in the right hemisphere of the esophagus (12 to 6 o'clock) with the highest rate in the 12 to 3 o'clock quadrant. These findings support enhanced scrutiny of the right hemisphere of the esophagus during surveillance and endoscopic treatment of patients with BE. Copyright © 2013 American Society for Gastrointestinal Endoscopy. Published by Mosby, Inc. All rights reserved.

Assessment of the residual tumour of colorectal liver metastases after chemotherapy: diffusion-weighted MR magnetic resonance imaging in the peripheral and entire tumour

Energy Technology Data Exchange (ETDEWEB)

Wagner, Mathilde; Doblas, Sabrina; Giraudeau, Celine [Paris Diderot University, INSERM, UMR 1149, Clichy (France); Ronot, Maxime; Van Beers, Bernard; Vilgrain, Valerie [Paris Diderot University, INSERM, UMR 1149, Clichy (France); Radiology Department, Beaujon Hospital, University Hospitals Paris Nord Val de Seine, Assistance Publique-Hopitaux de Paris, APHP, Clichy (France); Belghiti, Jacques [Hepatobiliary Surgery Department, Beaujon Hospital, University Hospitals Paris Nord Val de Seine, Assistance Publique-Hopitaux de Paris, APHP, Clichy (France); Paradis, Valerie [Pathology Department, Beaujon Hospital, University Hospitals Paris Nord Val de Seine, Assistance Publique-Hopitaux de Paris, APHP, Clichy (France)

2016-01-15

To evaluate the value of diffusion-weighted imaging (DWI) in detecting residual tumours (RTs) in colorectal liver metastases (CLMs) following chemotherapy, with a focus on tumour periphery. From January 2009-January 2012, 57 patients who underwent liver resection for CLMs with preoperative MRI (<3 months) including DWI were retrospectively included. CLMs were classified into three response groups on pathology: (1) major histological (MHR, RTs ≤ 10 %), (2) partial histological (PHR, RT = 10-49 %), and (3) no histological (NHR, RT ≥ 50 %). On DWI, regions of interest (ROIs) were drawn around the entire tumour and tumour periphery. Apparent diffusion (ADC) and pure diffusion (D) coefficients were calculated using a monoexponential fit, and compared using Kruskal-Wallis test on a lesion-per-lesion analysis. 111 CLMs were included. Fourteen (12.5 %), 42 (38 %) and 55 (49.5 %) CLMs presented a MHR, PHR and NHR, respectively. ADC and D of the peripheral ROIs were significantly higher in the MHR group (P = 0.013/P = 0.013). ADC and D from the entire tumour were not significantly different among the groups (P = 0.220/P = 0.103). In CLM treated with chemotherapy, ADC and D values from the entire tumour are not related to the degree of RT, while peripheral zone diffusion parameters could help identify metastases with MHR. (orig.)

Multiview Hessian regularization for image annotation.

Science.gov (United States)

Liu, Weifeng; Tao, Dacheng

2013-07-01

The rapid development of computer hardware and Internet technology makes large scale data dependent models computationally tractable, and opens a bright avenue for annotating images through innovative machine learning algorithms. Semisupervised learning (SSL) therefore received intensive attention in recent years and was successfully deployed in image annotation. One representative work in SSL is Laplacian regularization (LR), which smoothes the conditional distribution for classification along the manifold encoded in the graph Laplacian, however, it is observed that LR biases the classification function toward a constant function that possibly results in poor generalization. In addition, LR is developed to handle uniformly distributed data (or single-view data), although instances or objects, such as images and videos, are usually represented by multiview features, such as color, shape, and texture. In this paper, we present multiview Hessian regularization (mHR) to address the above two problems in LR-based image annotation. In particular, mHR optimally combines multiple HR, each of which is obtained from a particular view of instances, and steers the classification function that varies linearly along the data manifold. We apply mHR to kernel least squares and support vector machines as two examples for image annotation. Extensive experiments on the PASCAL VOC'07 dataset validate the effectiveness of mHR by comparing it with baseline algorithms, including LR and HR.

Sensing the News: User Experiences when Reading Locative News

Directory of Open Access Journals (Sweden)

Kjetil Vaage Øie

2012-02-01

Full Text Available This article focuses on user experiences on reading location-aware news on the mobile platform and aims to explore what experiences this kind of locative journalism generates and how such experiences change the users’ social interaction with news. We produced a specially designed mobile application and tailored news stories specific to this project called LocaNews in order to explore participants’ relation to the content in this journalistic format. The result is generated through a field study and a questionnaire of 32 people to find out how they experience the news presented in this format. The user participants’ responses are analyzed based on their news experiences, contextualizing places and their social interaction with the news within this form of journalism. Results showed that the local, semi-local and non-local user approaches the locative news in a different manner, but that the average user found this kind of news more interesting and more informative than ordinary news. The participants also have a problem identifying this as journalism, rather than an information service.

The Key Lake project

International Nuclear Information System (INIS)

1991-01-01

Key Lake is located in the Athabasca sand stone basin, 640 kilometers north of Saskatoon, Saskatchewan, Canada. The three sources of ore at Key Lake contain 70 100 tonnes of uranium. Features of the Key Lake Project were described under the key headings: work force, mining, mill process, tailings storage, permanent camp, environmental features, worker health and safety, and economic benefits. Appendices covering the historical background, construction projects, comparisons of western world mines, mining statistics, Northern Saskatchewan surface lease, and Key Lake development and regulatory agencies were included

Acid phosphomonoesterase (E.C. 3.1.3.2) location in soil

Czech Academy of Sciences Publication Activity Database

Rejšek, K.; Vránová, V.; Pavelka, Marian; Formánek, P.

2012-01-01

Roč. 175, č. 5 (2012), s. 196-211 ISSN 1436-8730 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0073; GA MŠk(CZ) LM2010007 Institutional research plan: CEZ:AV0Z60870520 Keywords : acid phosphomonoesterase * soil * roots * mycorrhizal fungi * location * extraction Subject RIV: EH - Ecology, Behaviour Impact factor: 1.380, year: 2012

Wind energy for water pumping in rural areas of China

International Nuclear Information System (INIS)

Dechang, S.

1991-01-01

After 1980, as the supply of conventional energy has not been able to follow the tremendous increase of the production demand in rural areas of China, a renewed interest for the application of wind energy was shown in many places. Therefore, the Chinese government began to pay more attention to wind energy utilization in rural areas. During the last ten years, several R ampersand D tasks for new modern wind pumps were carried out. Among them, three projects are the developments of wind energy screw pump systems (FDG-5 wind pump, FDG-7 wind pump and TFS-5 wind pump). At present, 50 of these wind pumps are working successfully in the rural areas for farmland drainage, salt ponds water lifting and aquatic product breeding, etc. The field tests show that these wind energy screw pump systems are suitable for low lifting head (< 3 meter) and large water flow (50 m/hr to 120 m/hr) operation in the coastal areas. Because the wind energy resource in many rural areas is sufficient for attractive application of wind pumps, and the supply of electricity as well as fuels is insufficient in these areas, the wind pumps will be spread on a rather large scale in the near future. 7 figs., 2 tabs., 3 refs

Concentrating Solar Power Projects - KaXu Solar One | Concentrating Solar

Science.gov (United States)

Power | NREL KaXu Solar One This page provides information on KaXu Solar One, a concentrating solar power (CSP) project, with data organized by background, parcipants and power plant configuration . Status Date: April 14, 2015 Project Overview Project Name: KaXu Solar One Country: South Africa Location

Inaccuracy of Location Information as a Consequence of Data Collection Delay and Presence of Misbehaving and Malicious Nodes

DEFF Research Database (Denmark)

Madsen, Tatiana Kozlova; Nielsen, Jimmy Jessen; Garcia, Mariano

2012-01-01

This paper presents an overview of current research investigations within the WHERE-2 Project with respect to possibilities of usage of geo-location information for protocol and system optimizations. In this work we would like to underline that incorporating the knowledge of nodes’ location in pr...

Modular helium reactor for non-electric applications

International Nuclear Information System (INIS)

Shenoy, A.

1997-01-01

The high temperature gas-cooled Modular Helium Reactor (MHR) is an advanced, high efficiency reactor system which can play a vital role in meeting the future energy needs of the world by contributing not only to the generation of electric power, but also the non-electric energy traditionally served by fossil fuels. This paper summarizes work done over 20 years, by several people at General Atomics, how the Modular Helium Reactor can be integrated to provide different non-electric applications during Process Steam/Cogeneration for industrial application, Process Heat for transportation fuel development and Hydrogen Production for various energy applications. The MHR integrates favorably into present petrochemical and primary metal process industries, heavy oil recovery, and future shale oil recovery and synfuel processes. The technical fit of the Process Steam/Cogeneration Modular Helium Reactor (PS/C-MHR) into these processes is excellent, since it can supply the required quantity and high quality of steam without fossil superheating. 12 refs, 25 figs, 2 tabs

Deep-Burn Modular Helium Reactor Fuel Development Plan

Energy Technology Data Exchange (ETDEWEB)

McEachern, D

2002-12-02

This document contains the workscope, schedule and cost for the technology development tasks needed to satisfy the fuel and fission product transport Design Data Needs (DDNs) for the Gas Turbine-Modular Helium Reactor (GT-MHR), operating in its role of transmuting transuranic (TRU) nuclides in spent fuel discharged from commercial light-water reactors (LWRs). In its application for transmutation, the GT-MHR is referred to as the Deep-Burn MHR (DB-MHR). This Fuel Development Plan (FDP) describes part of the overall program being undertaken by the U.S. Department of Energy (DOE), utilities, and industry to evaluate the use of the GT-MHR to transmute transuranic nuclides from spent nuclear fuel. The Fuel Development Plan (FDP) includes the work on fuel necessary to support the design and licensing of the DB-MHR. The FDP is organized into ten sections. Section 1 provides a summary of the most important features of the plan, including cost and schedule information. Section 2 describes the DB-MHR concept, the features of its fuel and the plan to develop coated particle fuel for transmutation. Section 3 describes the knowledge base for fabrication of coated particles, the experience with irradiation performance of coated particle fuels, the database for fission product transport in HTGR cores, and describes test data and calculations for the performance of coated particle fuel while in a repository. Section 4 presents the fuel performance requirements in terms of as-manufactured quality and performance of the fuel coatings under irradiation and accident conditions. These requirements are provisional because the design of the DB-MHR is in an early stage. However, the requirements are presented in this preliminary form to guide the initial work on the fuel development. Section 4 also presents limits on the irradiation conditions to which the coated particle fuel can be subjected for the core design. These limits are based on past irradiation experience. Section 5 describes

Project management plan for the 105-C Reactor interim safe storage project. Revision 1

International Nuclear Information System (INIS)

Miller, R.L.

1997-01-01

In 1942, the Hanford Site was commissioned by the US Government to produce plutonium. Between 1942 and 1955, eight water-cooled, graphite-moderated reactors were constructed along the Columbia River at the Hanford Site to support the production of plutonium. The reactors were deactivated from 1964 to 1971 and declared surplus. The Surplus Production Reactor Decommissioning Project (BHI 1994b) will decommission these reactors and has selected the 105-C Reactor to be used as a demonstration project for interim safe storage at the present location and final disposition of the entire reactor core in the 200 West Area. This project will result in lower costs, accelerated schedules, reduced worker exposure, and provide direct benefit to the US Department of Energy for decommissioning projects complex wide. This project sets forth plans, organizational responsibilities, control systems, and procedures to manage the execution of the Project Management Plan for the 105-C Reactor Interim Safe Storage Project (Project Management Plan) activities to meet programmatic requirements within authorized funding and approved schedules. The Project Management Plan is organized following the guidelines provided by US Department of Energy Order 4700.1, Project Management System and the Richland Environmental Restoration Project Plan (DOE-RL 1992b)

Examination of the relationship between project management critical success factors and project success of oil and gas drilling projects

Science.gov (United States)

Alagba, Tonye J.

Oil and gas drilling projects are the primary means by which oil companies recover large volumes of commercially available hydrocarbons from deep reservoirs. These types of projects are complex in nature, involving management of multiple stakeholder interfaces, multidisciplinary personnel, complex contractor relationships, and turbulent environmental and market conditions, necessitating the application of proven project management best practices and critical success factors (CSFs) to achieve success. Although there is some practitioner oriented literature on project management CSFs for drilling projects, none of these is based on empirical evidence, from research. In addition, the literature has reported alarming rates of oil and gas drilling project failure, which is attributable not to technical factors, but to failure of project management. The aim of this quantitative correlational study therefore, was to discover an empirically verified list of project management CSFs, which consistent application leads to successful implementation of oil and gas drilling projects. The study collected survey data online, from a random sample of 127 oil and gas drilling personnel who were members of LinkedIn's online community "Drilling Supervisors, Managers, and Engineers". The results of the study indicated that 10 project management factors are individually related to project success of oil and gas drilling projects. These 10 CSFs are namely; Project mission, Top management support, Project schedule/plan, Client consultation, Personnel, Technical tasks, Client acceptance, Monitoring and feedback, Communication, and Troubleshooting. In addition, the study found that the relationships between the 10 CSFs and drilling project success is unaffected by participant and project demographics---role of project personnel, and project location. The significance of these findings are both practical, and theoretical. Practically, application of an empirically verified CSFs list to oil

Leveraging tuberculosis case relative locations to enhance case detection and linkage to care in Swaziland.

Science.gov (United States)

Brunetti, Marie; Rajasekharan, Sathyanath; Ustero, Piluca; Ngo, Katherine; Sikhondze, Welile; Mzileni, Buli; Mandalakas, Anna; Kay, Alexander W

2018-01-01

In Swaziland, as in many high HIV/TB burden settings, there is not information available regarding the household location of TB cases for identifying areas of increased TB incidence, limiting the development of targeted interventions. Data from "Butimba", a TB REACH active case finding project, was re-analyzed to provide insight into the location of TB cases surrounding Mbabane, Swaziland. The project aimed to identify geographical areas with high TB burdens to inform active case finding efforts. Butimba implemented household contact tracing; obtaining landmark based, informal directions, to index case homes, defined here as relative locations. The relative locations were matched to census enumeration areas (known location reference areas) using the Microsoft Excel Fuzzy Lookup function. Of 403 relative locations, an enumeration area reference was detected in 388 (96%). TB cases in each census enumeration area and the active case finders in each Tinkhundla, a local governmental region, were mapped using the geographic information system, QGIS 2.16. Urban Tinkhundla predictably accounted for most cases; however, after adjusting for population, the highest density of cases was found in rural Tinkhundla. There was no correlation between the number of active case finders currently assigned to the 7 Tinkhundla surrounding Mbabane and the total number of TB cases (Spearman rho = -0.57, p  = 0.17) or the population adjusted TB cases (Spearman rho = 0.14, p  = 0.75) per Tinkhundla. Reducing TB incidence in high-burden settings demands novel analytic approaches to study TB case locations. We demonstrated the feasibility of linking relative locations to more precise geographical areas, enabling data-driven guidance for National Tuberculosis Programs' resource allocation. In collaboration with the Swazi National Tuberculosis Control Program, this analysis highlighted opportunities to better align the active case finding national strategy with the TB disease

76 FR 75543 - Castle Creek Hydroelectric Project; Notice of Preliminary Permit Application Accepted for Filing...

Science.gov (United States)

2011-12-02

... Hydroelectric Project; Notice of Preliminary Permit Application Accepted for Filing and Soliciting Comments... (FPA), proposing to study the feasibility of the Castle Creek Hydroelectric Project to be located on... be located adjacent to the original hydroelectric plant, with a single shaft Pelton turbine...

Alaska: a guide to geothermal energy development

Energy Technology Data Exchange (ETDEWEB)

Basescu, N.; Bloomquist, R.G.; Higbee, C.; Justus, D.; Simpson, S.

1980-06-01

A brief overview is given of the geological characteristics of each region of the state as they relate to potential geothermal development. Those exploration methods which can lead to the siting of a deep exploration well are described. Requirements and techniques needed for drilling deeper higher temperature exploration and production wells are presented. Electrical generation, direct utilization, and indirect utilization are reviewed. Economic factors of direct use projects are presented. A general guide to the regulatory framework affecting geothermal energy development is provided. The general steps necessary to gain access to explore, develop, distribute, and use geothermal resources are outlined. (MHR)

Preliminary report on the Pacific Gas and Electric Company's notice of intention to seek certification for Geysers Unit 16 (78-NOI-6)

Energy Technology Data Exchange (ETDEWEB)

1979-01-01

The preliminary findings of fact and conclusion adopted by the Commission Committee are presented. Also, a description of the proposed project, a summary of the proceedings to date, and local, state, and federal government agency comments on the proposal are included. Preliminary findings and conclusions are presented on: (a) conformity to the forecast of statewide and service area electric power demands; (b) the degree to which the proposed site and facility conform with applicable local, regional, state, and federal standards, ordinances and laws; (c) the safety and reliability of the facility; and (d) the relative merit of the proposed transmission line corridors. (MHR)

Washington: a guide to geothermal energy development

Energy Technology Data Exchange (ETDEWEB)

Bloomquist, R.G.; Basescu, N.; Higbee, C.; Justus, D.; Simpson, S.

1980-01-01

A brief overview is given of the geological characteristics of each region of the state as they relate to potential geothermal development. Those exploration methods which can lead to the siting of a deep exploration well are described. Requirements and techniques needed for drilling deeper higher temperature exploration and production wells are presented. Electrical generation, direct utilization, and indirect utilization are reviewed. Economic factors of direct use projects are presented. A general guide to the regulatory framework affecting geothermal energy development is provided. The general steps necessary to gain access to explore, develop, distribute, and use geothermal resources are outlined. (MHR)

Preliminary report on the Department of Water Resources Notice of Intention to file an application for certification of DWR Bottle Rock, 78-NOI-7

Energy Technology Data Exchange (ETDEWEB)

1979-01-01

The preliminary findings of fact and conclusion adopted by the Commission Committee are presented. Also, a description of the proposed project, a summary of the proceedings to date, and local, state, and federal government agency comments on the proposal are included. Preliminary findings and conclusions are presented on: (a) conformity to the forecast of statewide and service area electric power demands; (b) the degree to which the proposed site and facility conform with applicable local, regional, state, and federal standards, ordinances and laws; (c) the safety and reliability of the facility; and (d) the relative merit of the proposed transmission line corridors. (MHR)

Source localization using recursively applied and projected (RAP) MUSIC

Energy Technology Data Exchange (ETDEWEB)

Mosher, J.C. [Los Alamos National Lab., NM (United States); Leahy, R.M. [Univ. of Southern California, Los Angeles, CA (United States). Signal and Image Processing Inst.

1998-03-01

A new method for source localization is described that is based on a modification of the well known multiple signal classification (MUSIC) algorithm. In classical MUSIC, the array manifold vector is projected onto an estimate of the signal subspace, but errors in the estimate can make location of multiple sources difficult. Recursively applied and projected (RAP) MUSIC uses each successively located source to form an intermediate array gain matrix, and projects both the array manifold and the signal subspace estimate into its orthogonal complement. The MUSIC projection is then performed in this reduced subspace. Using the metric of principal angles, the authors describe a general form of the RAP-MUSIC algorithm for the case of diversely polarized sources. Through a uniform linear array simulation, the authors demonstrate the improved Monte Carlo performance of RAP-MUSIC relative to MUSIC and two other sequential subspace methods, S and IES-MUSIC.

Analysis of Natural Ventilation in a Passive House Located in Cold Conditions

DEFF Research Database (Denmark)

Oropeza-Perez, Ivan; Østergaard, Poul Alberg; Remmen, Arne

2013-01-01

in Vejle during cooling season, in the months of June, July and August. The dwelling belongs to a Danish project of passive houses denominated Komfort Husene, where its occupants claim there is no thermal comfort in summer time. The results show that the use of natural ventilation helps to reduce......This article shows the potential of using natural ventilation as a passive method of cooling buildings that are located in cold climate countries using Denmark as a case study. The energy saving potential of natural ventilation is found by performing thermal simulations of a household located...

A hybrid nested partitions algorithm for banking facility location problems

KAUST Repository

Xia, Li

2010-07-01

The facility location problem has been studied in many industries including banking network, chain stores, and wireless network. Maximal covering location problem (MCLP) is a general model for this type of problems. Motivated by a real-world banking facility optimization project, we propose an enhanced MCLP model which captures the important features of this practical problem, namely, varied costs and revenues, multitype facilities, and flexible coverage functions. To solve this practical problem, we apply an existing hybrid nested partitions algorithm to the large-scale situation. We further use heuristic-based extensions to generate feasible solutions more efficiently. In addition, the upper bound of this problem is introduced to study the quality of solutions. Numerical results demonstrate the effectiveness and efficiency of our approach. © 2010 IEEE.

Locate the Lesion: A Project-Based Learning Case that Stimulates Comprehension and Application of Neuroanatomy.

Science.gov (United States)

Lemons, Michele L

2017-01-01

A fictitious patient, Mr. Challenge, is admitted to the emergency room and displays symptoms consistent with damage to the central nervous system. In this problem-based learning case, students are challenged to determine the location of a lesion that is consistent with Mr. Challenge's symptoms. Students discover details about Mr. Challenge's symptoms while exploring three anatomical pathways: corticospinal tract, spinothalamic tract and medial lemniscal pathway. Students make predictions as to which of these pathways may be damaged in Mr. Challenge and defend their predictions based on their research of the function and anatomical location of these tracts. This ultimately leads the student to identifying a single lesion site that can account for Mr. Challenge's symptoms. This case is executed in an undergraduate neuroscience course and would be useful in anatomy and physiology course, as well as other courses that serve students interested in health science related careers.

Problem-Based Service Learning: The Evolution of a Team Project

Science.gov (United States)

Connor-Greene, Patricia A.

2002-01-01

In this article, I describe the evolution of a problem-based service learning project in an undergraduate Abnormal Psychology course. Students worked in teams on a semester-long project to locate and evaluate information and treatment for specific psychiatric disorders. As part of the project, each team selected relevant bibliographic materials,…

Profitability of locations for wind energy utilization. Investigation of the significant influence parameters

International Nuclear Information System (INIS)

Wallasch, Anna-Kathrin; Rehfeldt, Knud

2012-04-01

The jurisdiction for the designation of sites for wind energy requires that sufficient space was procured within the created sites for wind energy to achieve an exclusionary effect in the rest of the plan area of wind energy. This means that the designated areas must allow the economic operation of wind turbines. It is often not easy to adequately determine and assess the suitability of an area. The project economics of wind energy projects is dependent on the individual case, and there is no general guideline for estimating the decision of municipalities. In the case of allegations of so-called ''prevention plan'' against communities in which seemingly unsuitable areas have been identified the dispute is usually settled by court. This represents a considerable effort. At this point, the present investigation shall begin to prepare and carry out more detailed studies on the economics of wind energy sites, which can be used for orientation in the evaluation of possible identified areas for wind energy. For this purpose, the results of the power generation costs of wind energy projects from the Scientific accompanying report wind energy for EEG Progress Report will first used and collectively evaluated, what conclusions can be obtained based on these results for the profitability of locations. Based on the database, which was developed as part of the scientific opinion accompanying wind energy for EEG Progress Report, then a sensitivity analysis is carried out with regard to individual parameters of the economics of wind energy projects. This means individual factors within the sample locations are varied and analyzes the impact on the project economics. Thus, statements about can be taken, how limits for individual factors can be defined in terms of project economics. [de

Projection computation based on pixel in simultaneous algebraic reconstruction technique

International Nuclear Information System (INIS)

Wang Xu; Chen Zhiqiang; Xiong Hua; Zhang Li

2005-01-01

SART is an important arithmetic of image reconstruction, in which the projection computation takes over half of the reconstruction time. An efficient way to compute projection coefficient matrix together with memory optimization is presented in this paper. Different from normal method, projection lines are located based on every pixel, and the following projection coefficient computation can make use of the results. Correlation of projection lines and pixels can be used to optimize the computation. (authors)

Identifying Issues in Applying Integrated Project Delivery to Domestic Nuclear Power Plant Construction Projects

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Joo [Korean Nuclear Society, Daejeon (Korea, Republic of)

2016-05-15

Integrated Project Delivery (IPD) is defined as that people, systems, business structures, and practices of key stakeholders are incorporated into a single-team, with a single process, which executes a project in a way of optimizing the project's outcome, increasing values delivered to the end user, reducing waste, and maximizing efficiency throughout the phases of engineering to construction. The researcher had carried out literature review in terms of IPD to identify major characteristics of IPD which are presented in the following section and had compared such characteristics against peculiarities of nuclear power plant (NPP) construction projects in order to shed light on obstacles in possible application of IPD method to domestic NPP construction projects in the coming days. In this research, three (3) major characteristics of IPD were identified: 1) key stakeholders signing one balanced contract, forming de facto one body, sharing risk and reward 2) an integrated project team being formed in the early stage of a project and providing input to minimize time and cost loss from rework downstream 3) team members co-locating, having open and direct communication, making decisions on time, and pursuing the success of the project itself.

Nuclear systems of the future: international forum generation 4 and research and development projects at the Cea; Systemes nucleaires du futur: forum international generation 4 et projets de R et D du CEA

Energy Technology Data Exchange (ETDEWEB)

Carre, F

2003-07-01

To advance nuclear energy to meet future energy needs, ten countries have agreed to develop a future generation of nuclear energy systems, known as Generation 4. A technology road map to guide the Generation 4 effort was begun. This document presents the goals for these nuclear systems and the research programs of the Cea on the gas technology, GT-MHR, VHTR and GFR and the other systems as sodium Fast Neutron reactors, supercritical water and space nuclear. (A.L.B.)

Tri-State Synfuels Project Review: Volume 12. Fluor project status. [Proposed Henderson, Kentucky coal to gasoline plant; engineering

Energy Technology Data Exchange (ETDEWEB)

1982-06-01

The purpose of this report is to document and summarize activities associated with Fluor's efforts on the Tri-State Synfuels Project. The proposed facility was to be coal-to-transport fuels facility located in Henderson, Kentucky. Tri-State Synfuels Company was participating in the project as a partner of the US Department of Energy per terms of a Cooperative Agreement resulting from DOE's synfuel's program solicitation. Fluor's initial work plan called for preliminary engineering and procurement services to the point of commitment for construction for a Sasol Fischer-Tropsch plant. Work proceeded as planned until October 1981 when results of alternative coal-to-methanol studies revealed the economic disadvantage of the Synthol design for US markets. A number of alternative process studies followed to determine the best process configuration. In January 1982 Tri-State officially announced a change from Synthol to a Methanol to Gasoline (MTG) design basis. Further evaluation and cost estimates for the MTG facility eventually led to the conclusion that, given the depressed economic outlook for alternative fuels development, the project should be terminated. Official announcement of cancellation was made on April 13, 1982. At the time of project cancellation, Fluor had completed significant portions of the preliminary engineering effort. Included in this report are descriptions and summaries of Fluor's work during this project. In addition location of key project data and materials is identified and status reports for each operation are presented.

125I-[Tyr0,D-Trp8]somatostatin-14 binding sites in the locus coeruleus of the rat are located on both ascending and descending projecting noradrenergic cells

International Nuclear Information System (INIS)

Epelbaum, J.; Bluet-Pajot, M.T.; Llorens-Cortes, C.; Kordon, C.; Mounier, F.; Senut, M.C.; Videau, C.

1990-01-01

Radioautographic determinations of 125I-[Tyr0,D-Trp8]somatostatin-14 (125I-SRIF) binding sites were performed on frozen serial sections of the locus coeruleus (LC) of control rats and of rats subjected to either bilateral microinjections of 6 hydroxydopamine (6-OHDA) into the LC or unilateral microinjection into the ascending noradrenergic bundles. These experiments were performed in order to determine whether 125I-SRIF binding was localized to noradrenergic-containing cells and in which regions the cells which contain the binding sites are projecting. The extent of the lesions was assessed by measuring norepinephrine (NE) levels in the hippocampus (88% decrease as compared to sham-operated animals) for bilateral LC lesions and in the frontal cortex (87% reduction vs. contralateral side) for unilateral bundle lesions. In control rats, 125I-SRIF binding sites were restricted to the boundaries of the LC and followed closely the distribution of tyrosine hydroxylase-labeled cells. Three weeks after bilateral injections of 6-OHDA, 125I-SRIF binding decreased by 79% in all regions of the LC. In contrast, unilateral destruction of the ascending noradrenergic bundles resulted in a moderate decrease only in the middle part of the LC with a more important effect in the dorsal (55%) than in the ventral (24%) portion of the nucleus. These data demonstrate that: (1) most SRIF receptors in the LC are located in the vicinity of NE-containing cell bodies and (2) NE-containing cells bearing SRIF receptors project to the forebrain as well as to other terminal areas located more caudally in the brain. These data suggest a general role for SRIF in the control of the multiple functions of the LC

Automated vehicle location, data recording, friction measurement and applicator control for winter road maintenance.

Science.gov (United States)

2010-02-01

The first part of this project conducted a detailed evaluation of the ability of a new friction measurement system to : provide an accurate measure of road conditions. A system that records friction coefficient as a function of road : location was de...

Fisheries Restoration Grant Program Projects [ds168

Data.gov (United States)

California Natural Resource Agency — This shapefile (FRGP_All_020209.shp) represents the locations of all ongoing and completed salmonid restoration projects in California with existing records in the...

Tumour location within the breast: Does tumour site have prognostic ability?

Science.gov (United States)

Rummel, Seth; Hueman, Matthew T; Costantino, Nick; Shriver, Craig D; Ellsworth, Rachel E

2015-01-01

Tumour location within the breast varies with the highest frequency in the upper outer quadrant (UOQ) and lowest frequency in the lower inner quadrant (LIQ). Whether tumour location is prognostic is unclear. To determine whether tumour location is prognostic, associations between tumour site and clinicopathological characteristics were evaluated. All patients enrolled in the Clinical Breast Care Project whose tumour site-UOQ, upper inner quadrant (UIQ), central, LIQ, lower outer quadrant (LOQ)-was determined by a single, dedicated breast pathologist were included in this study. Patients with multicentric disease (n = 122) or tumours spanning multiple quadrants (n = 381) were excluded from further analysis. Clinicopathological characteristics were analysed using chi-square tests for univariate analysis with multivariate analysis performed using principal components analysis (PCA) and multiple logistic regression. Significance was defined as P location, 30 had bilateral disease. Tumour location in the UOQ (51.5%) was significantly higher than in the UIQ (15.6%), LOQ (14.2%), central (10.6%), or LIQ (8.1%). Tumours in the central quadrant were significantly more likely to have higher tumour stage (P = 0.003) and size (P location as a prognostic factor revealed that although tumours in the central region are associated with less favourable outcome, these associations are not independent of location but rather driven by larger tumour size. Tumours in the central region are more difficult to detect mammographically, resulting in larger tumour size at diagnosis and thus less favourable prognosis. Together, these data demonstrate that tumour location is not an independent prognostic factor.

Modeling of displacement damage in silicon carbide detectors resulting from neutron irradiation

Science.gov (United States)

Khorsandi, Behrooz

There is considerable interest in developing a power monitor system for Generation IV reactors (for instance GT-MHR). A new type of semiconductor radiation detector is under development based on silicon carbide (SiC) technology for these reactors. SiC has been selected as the semiconductor material due to its superior thermal-electrical-neutronic properties. Compared to Si, SiC is a radiation hard material; however, like Si, the properties of SiC are changed by irradiation by a large fluence of energetic neutrons, as a consequence of displacement damage, and that irradiation decreases the life-time of detectors. Predictions of displacement damage and the concomitant radiation effects are important for deciding where the SiC detectors should be placed. The purpose of this dissertation is to develop computer simulation methods to estimate the number of various defects created in SiC detectors, because of neutron irradiation, and predict at what positions of a reactor, SiC detectors could monitor the neutron flux with high reliability. The simulation modeling includes several well-known---and commercial---codes (MCNP5, TRIM, MARLOWE and VASP), and two kinetic Monte Carlo codes written by the author (MCASIC and DCRSIC). My dissertation will highlight the displacement damage that may happen in SiC detectors located in available positions in the OSURR, GT-MHR and IRIS. As extra modeling output data, the count rates of SiC for the specified locations are calculated. A conclusion of this thesis is SiC detectors that are placed in the thermal neutron region of a graphite moderator-reflector reactor have a chance to survive at least one reactor refueling cycle, while their count rates are acceptably high.

EPA Office of Water (OW): Nonpoint Source Projects NHDPlus Indexed Dataset

Data.gov (United States)

U.S. Environmental Protection Agency — GRTS locational data for nonpoint source projects. GRTS locations are coded onto NHDPlus v2.1 flowline features to create point and line events or coded onto NHDPlus...

Geothermal energy in Idaho: site data base and development status

Energy Technology Data Exchange (ETDEWEB)

McClain, D.W.

1979-07-01

Detailed site specific data regarding the commercialization potential of the proven, potential, and inferred geothermal resource areas in Idaho are presented. To assess the potential for geothermal resource development in Idaho, several kinds of data were obtained. These include information regarding institutional procedures for geothermal development, logistical procedures for utilization, energy needs and forecasted demands, and resource data. Area reports, data sheets, and scenarios were prepared that described possible geothermal development at individual sites. In preparing development projections, the objective was to base them on actual market potential, forecasted growth, and known or inferred resource conditions. To the extent possible, power-on-line dates and energy utilization estimates are realistic projections of the first events. Commercialization projections were based on the assumption that an aggressive development program will prove sufficient known and inferred resources to accomplish the projected event. This report is an estimate of probable energy developable under an aggressive exploration program and is considered extremely conservative. (MHR)

Lost in Location

DEFF Research Database (Denmark)

Hansen, Lone Koefoed

2009-01-01

traversed. While becoming destination aware, the individual loses her location awareness. The article proposes that the reason people get lost when using sat-nav is due to a wrong location-performative paradigm. As an alternative, the article introduces and analyzes two performance-related examples...... that illustrate an alternative location-performative paradigm: Meredith Warner's Lost/Found knitting series and Etter and Schecht's Melodious Walkabout. In both examples, the artist's hand becomes the intermediary between alien and location. Thus, by exploring how wayfinding can be a poetically situated...... performance, the article examines how the growing locative media industry can learn from the location-aware performative strategies employed by artists who create situated and urban performances for the curious participant. The academic frames employed in the analysis draw on psychogeography, site...

Protein (multi-)location prediction: using location inter-dependencies in a probabilistic framework

Science.gov (United States)

2014-01-01

Motivation Knowing the location of a protein within the cell is important for understanding its function, role in biological processes, and potential use as a drug target. Much progress has been made in developing computational methods that predict single locations for proteins. Most such methods are based on the over-simplifying assumption that proteins localize to a single location. However, it has been shown that proteins localize to multiple locations. While a few recent systems attempt to predict multiple locations of proteins, their performance leaves much room for improvement. Moreover, they typically treat locations as independent and do not attempt to utilize possible inter-dependencies among locations. Our hypothesis is that directly incorporating inter-dependencies among locations into both the classifier-learning and the prediction process can improve location prediction performance. Results We present a new method and a preliminary system we have developed that directly incorporates inter-dependencies among locations into the location-prediction process of multiply-localized proteins. Our method is based on a collection of Bayesian network classifiers, where each classifier is used to predict a single location. Learning the structure of each Bayesian network classifier takes into account inter-dependencies among locations, and the prediction process uses estimates involving multiple locations. We evaluate our system on a dataset of single- and multi-localized proteins (the most comprehensive protein multi-localization dataset currently available, derived from the DBMLoc dataset). Our results, obtained by incorporating inter-dependencies, are significantly higher than those obtained by classifiers that do not use inter-dependencies. The performance of our system on multi-localized proteins is comparable to a top performing system (YLoc+), without being restricted only to location-combinations present in the training set. PMID:24646119

Protein (multi-)location prediction: using location inter-dependencies in a probabilistic framework.

Science.gov (United States)

Simha, Ramanuja; Shatkay, Hagit

2014-03-19

Knowing the location of a protein within the cell is important for understanding its function, role in biological processes, and potential use as a drug target. Much progress has been made in developing computational methods that predict single locations for proteins. Most such methods are based on the over-simplifying assumption that proteins localize to a single location. However, it has been shown that proteins localize to multiple locations. While a few recent systems attempt to predict multiple locations of proteins, their performance leaves much room for improvement. Moreover, they typically treat locations as independent and do not attempt to utilize possible inter-dependencies among locations. Our hypothesis is that directly incorporating inter-dependencies among locations into both the classifier-learning and the prediction process can improve location prediction performance. We present a new method and a preliminary system we have developed that directly incorporates inter-dependencies among locations into the location-prediction process of multiply-localized proteins. Our method is based on a collection of Bayesian network classifiers, where each classifier is used to predict a single location. Learning the structure of each Bayesian network classifier takes into account inter-dependencies among locations, and the prediction process uses estimates involving multiple locations. We evaluate our system on a dataset of single- and multi-localized proteins (the most comprehensive protein multi-localization dataset currently available, derived from the DBMLoc dataset). Our results, obtained by incorporating inter-dependencies, are significantly higher than those obtained by classifiers that do not use inter-dependencies. The performance of our system on multi-localized proteins is comparable to a top performing system (YLoc+), without being restricted only to location-combinations present in the training set.

A triclinic crystal structure of the carboxy-terminal domain of HIV-1 capsid protein with four molecules in the asymmetric unit reveals a novel packing interface

International Nuclear Information System (INIS)

Lampel, Ayala; Yaniv, Oren; Berger, Or; Bacharach, Eran; Gazit, Ehud; Frolow, Felix

2013-01-01

The triclinic structure of the HIV-1 capsid protein contains four molecules in the asymmetric unit that form a novel packing interface that could conceivably resemble an intermediate structure that is involved in the early steps of HIV-1 assembly. The Gag precursor is the major structural protein of the virion of human immunodeficiency virus-1 (HIV-1). Capsid protein (CA), a cleavage product of Gag, plays an essential role in virus assembly both in Gag-precursor multimerization and in capsid core formation. The carboxy-terminal domain (CTD) of CA contains 20 residues that are highly conserved across retroviruses and constitute the major homology region (MHR). Genetic evidence implies a role for the MHR in interactions between Gag precursors during the assembly of the virus, but the structural basis for this role remains elusive. This paper describes a novel triclinic structure of the HIV-1 CA CTD at 1.6 Å resolution with two canonical dimers of CA CTD in the asymmetric unit. The canonical dimers form a newly identified packing interface where interactions of four conserved MHR residues take place. This is the first structural indication that these MHR residues participate in the putative CTD–CTD interactions. These findings suggest that the molecules forming this novel interface resemble an intermediate structure that participates in the early steps of HIV-1 assembly. This interface may therefore provide a novel target for antiviral drugs

Exergoeconomic assessment and parametric study of a Gas Turbine-Modular Helium Reactor combined with two Organic Rankine Cycles

International Nuclear Information System (INIS)

Mohammadkhani, F.; Shokati, N.; Mahmoudi, S.M.S.; Yari, M.; Rosen, M.A.

2014-01-01

An exergoeconomic analysis is reported for a combined system with a net electrical output of 299 MW in which waste heat from a Gas Turbine-Modular Helium Reactor (GT-MHR) is utilized by two Organic Rankine Cycles (ORCs). A parametric study is also done to reveal the effects on the exergoeconomic performance of the combined system of such significant parameters as compressor pressure ratio, turbine inlet temperature, temperatures of evaporators, pinch point temperature difference in the evaporators and degree of superheat at the ORC (Organic Rankine Cycle) turbines inlet. Finally the combined cycle performance is optimized from the viewpoint of exergoeconomics. The results show that the precooler, the intercooler and the ORC condensers exhibit the worst exergoeconomic performance. For the overall system, the exergoeconomic factor, the capital cost rate and the exergy destruction cost rate are determined to be 37.95%, 6876 $/h and 11,242 $/h, respectively. Also, it is observed that the unit cost of electricity produced by the GT-MHR turbine increases with increasing GT-MHR turbine inlet temperature but decreases as the other above mentioned parameters increase. - Highlights: • An exergoeconomic analysis is performed for the GT-MHR/ORC (Organic Rankine Cycle) combined cycle. • The effects of decision parameters on the exergoeconomic performance are studied. • The highest exergy destructions occur in the precooler, intercooler and condenser. • Superheating the working fluid at the ORC turbine inlet is not necessary. • Thermodynamic and exergoeconomic optimal conditions differ from each other

Quarter Dates Location(s) Purpose Transportation and Travel ...

International Development Research Centre (IDRC) Digital Library (Canada)

IDRC CRDI

Dates. Location(s). Purpose. Transportation and Travel. Accommodation,. Meals and Other. Hospitality. Total. Expenses. Quarter 1. May 15. Ottawa, ON. Meetings. May 20 to 21. Washington DC. Conference. 11,364.93. 3,274.71. 53.50. 14,693.14. May 5 to June 5. Kenya and England. Meetings. June 18 to 21. Winnipeg, MB.

Location of an electric source facility and local area promotion

International Nuclear Information System (INIS)

Shimohirao, Isao

1999-01-01

Here were described on energy demand and supply, energy policy and local area promotion policy for basic problems important on location of electric source facilities. At present, co-existence business between electricity business and electric source location area is lacking in its activity. It seems to be necessary to enforce some systems to intend to promote it earnestly, and to effort to promote industry promotions such as introduction of some national projects, induction of electricity cost reduction for a means of business invitation, and so forth. And it is necessary to promote them under cooperations with electricity businesses, governments, universities and communities for the industrial promotion and fixation of the youth at local areas. In order to realize such necessities, further larger efforts are expected for national and local governments. (G.K.)

Location Systems An Introduction to the Technology Behind Location Awareness

CERN Document Server

LaMarca, Anthony

2008-01-01

Advances in electronic location technology and the coming of age of mobile computing have opened the door for location-aware applications to permeate all aspects of everyday life. Location is at the core of a large number of high-value applications ranging from the life-and-death context of emergency response to serendipitous social meet-ups. For example, the market for GPS products and services alone is expected to grow to US200 billion by 2015. Unfortunately, there is no single location technology that is good for every situation and exhibits high accuracy, low cost, and universal coverage.

The Verrès Castle Access Project

Directory of Open Access Journals (Sweden)

Tito Berti Nulli

2010-10-01

Full Text Available The article describes the access project of the Verrès castle, located in Aosta Valley in Italy, underlining some urban and transport planning and design elements. This project constitute in fact an interesting example of integration between transport infrastructure planning and design with urban planning strategy for tourism development. The transport infrastructure (in this case a vertical lift for tourism use has furthermore a deep attention to the landscape and social contest and a good architectural design. The Verrès castle access project represents and interesting example of sustainable mobility and of touristic area accessibility which is strong integrated with urban renewal and territorial development. The feasibility study, financed by the Verrès municipality, is part of a the INTERREG IIIA ACOLTRA Project financed by Italy and France with the aim of creating a network of transnational tourist itineraries. Through this initiative Aosta Valley and Haute-Savoy are developing a common tourism strategy that intends to promote cultural heritage and tourism mobility through the RITT (Reseaux d’Itineraires Touristiques Transfrontalieres. In this contest of intervention the study for the accessibility of the Verrès castle is inserted, with the aim of designing a mobility infrastructure for the main attraction of the valley and at the same of strengthening the appeal of tourist attraction of the whole area. The project is located in the small city of Verrés, that lies at 390m, on the banks of the river Evançon. As many of the Valdostani municipalities is characterized by several small urban centers, which are located in a around 8kmq, in a territory where live 2.700 inhabitants. The feasibility study examines three different alternative for a lift that should connect the Verrès centre with the castle. In particular different transport technology (inclined and vertical lift and several path alternatives have been evaluated. The final

76 FR 76153 - Grand Coulee Project Hydroelectric Authority; Notice of Preliminary Permit Application Accepted...

Science.gov (United States)

2011-12-06

... Project Hydroelectric Authority; Notice of Preliminary Permit Application Accepted for Filing and... Hydroelectric Project (Scooteney Inlet Project or project) to be located on the Potholes East Canal, which is an..., Grand Coulee Project Hydroelectric Authority, P.O. Box 219, Ephrata, WA 98823; phone: (509) 754-2227...

Social assessment and location of nuclear and thermal power plants

International Nuclear Information System (INIS)

Nemoto, Kazuyasu; Nishio, Mitsuo.

1979-01-01

Most of the locations of nuclear and thermal power plants in Japan are depopulated villages with remote rural character, but for the development of such districts, the policy is not yet clearly established, and the appropriate measures are not taken. The living regions of residents and the production regions of enterprises are more and more estranged. Social assessment is the scientific method to perceive the future change due to the installation of power stations. The features particular to the assessment of natural environment and social environment related to the location of power stations are considered, and the technical problems involved in the method of assessment of natural environment are solved, and the actual method of assessment of social environment is developed. Then, the possibility of establishing this method and the problems in its application are investigated. The plan of developing the surroundings of power generation facilities is criticized, and the coordination of the location plan of power companies and the regional projects of municipalities is discussed. Finally, the mechanism of consensus formation concerning the location of power stations is considered, dividing into regional consensus formation and administrative consensus formation, and the possibility of instituting social assessment is examined. (Kako, I.)

Data collected on TPAD implementation projects.

Science.gov (United States)

2014-11-01

TPAD testing was conducted by CTR personnel at the following locations during TxDOT Project : 5-6005-01: Statewide Implementation of Total Pavement Acceptance Device (TPAD) (January : 2013 through August 2014): : (1) San Marcos Airport, : (2) IH 10 i...

40 CFR 93.126 - Exempt projects.

Science.gov (United States)

2010-07-01

... transportation buildings, structures, or facilities). Repair of damage caused by natural disasters, civil unrest... location or feature. Safer non-Federal-aid system roads. Shoulder improvements. Increasing sight distance... than signalization projects. Railroad/highway crossing warning devices. Guardrails, median barriers...

Decision support with respect to facility location and fleet composition for FoodBank Cape Town

CSIR Research Space (South Africa)

Lanz, EJ

2011-09-01

Full Text Available Fleet Composition Current & Future Work FoodBank Cape Town First in South Africa Launched on 2 March 2009 Warehouse located in Philippi East [1] Majority of food sourced from DCs and retail sector Distributing to approximately 200 agencies... & Future Work Figure: Sourcing & distributing ow diagram EJ Lanz 40th Annual ORSSA Conference 11 of 36 Background Project Focus Demand & Candidate Sites Facility Location Problems Vehicle Fleet Composition Current & Future Work Data Demand Site...

Archaeological survey and monitoring of initial excavations within the basalt waste isolation project reference repository location and associated drill borehole site locations

International Nuclear Information System (INIS)

McCarthy, M.M.

1984-01-01

This letter report concerns cultural resources studies undertaken in November 1982 for the exploratory shaft starter hole and surface facilities for the Basalt Waste Isolation Project (BWIP). These studies were carried out under the provisions of the National Environmental Policy Act, the amended National Historic Preservation Act, and the Archaeological Resources Act. This report concludes that neither cultural nor palentological resources are being affected by the BWIP during the present phase of construction work and test drilling. 4 refs., 10 figs

Radar Location Equipment Development Program: Phase I

Energy Technology Data Exchange (ETDEWEB)

Sandness, G.A.; Davis, K.C.

1985-06-01

The work described in this report represents the first phase of a planned three-phase project designed to develop a radar system for monitoring waste canisters stored in a thick layer of bedded salt at the Waste Isolation Pilot Plant near Carlsbad, New Mexico. The canisters will be contained in holes drilled into the floor of the underground waste storage facility. It is hoped that these measurements can be made to accuracies of +-5 cm and +-2/sup 0/, respectively. The initial phase of this project was primarily a feasibility study. Its principal objective was to evaluate the potential effectiveness of the radar method in the planned canister monitoring application. Its scope included an investigation of the characteristics of radar signals backscattered from waste canisters, a test of preliminary data analysis methods, an assessment of the effects of salt and bentonite (a proposed backfill material) on the propagation of the radar signals, and a review of current ground-penetrating radar technology. A laboratory experiment was performed in which radar signals were backscattered from simulated waste canisters. The radar data were recorded by a digital data acquisition system and were subsequently analyzed by three different computer-based methods to extract estimates of canister location and tilt. Each of these methods yielded results that were accurate within a few centimeters in canister location and within 1/sup 0/ in canister tilt. Measurements were also made to determine the signal propagation velocities in salt and bentonite (actually a bentonite/sand mixture) and to estimate the signal attenuation rate in the bentonite. Finally, a product survey and a literature search were made to identify available ground-penetrating radar systems and alternative antenna designs that may be particularly suitable for this unique application. 10 refs., 21 figs., 4 tabs.

Radar Location Equipment Development Program: Phase I

International Nuclear Information System (INIS)

Sandness, G.A.; Davis, K.C.

1985-06-01

The work described in this report represents the first phase of a planned three-phase project designed to develop a radar system for monitoring waste canisters stored in a thick layer of bedded salt at the Waste Isolation Pilot Plant near Carlsbad, New Mexico. The canisters will be contained in holes drilled into the floor of the underground waste storage facility. It is hoped that these measurements can be made to accuracies of +-5 cm and +-2 0 , respectively. The initial phase of this project was primarily a feasibility study. Its principal objective was to evaluate the potential effectiveness of the radar method in the planned canister monitoring application. Its scope included an investigation of the characteristics of radar signals backscattered from waste canisters, a test of preliminary data analysis methods, an assessment of the effects of salt and bentonite (a proposed backfill material) on the propagation of the radar signals, and a review of current ground-penetrating radar technology. A laboratory experiment was performed in which radar signals were backscattered from simulated waste canisters. The radar data were recorded by a digital data acquisition system and were subsequently analyzed by three different computer-based methods to extract estimates of canister location and tilt. Each of these methods yielded results that were accurate within a few centimeters in canister location and within 1 0 in canister tilt. Measurements were also made to determine the signal propagation velocities in salt and bentonite (actually a bentonite/sand mixture) and to estimate the signal attenuation rate in the bentonite. Finally, a product survey and a literature search were made to identify available ground-penetrating radar systems and alternative antenna designs that may be particularly suitable for this unique application. 10 refs., 21 figs., 4 tabs

Moderate hypoxia followed by reoxygenation results in blood-brain barrier breakdown via oxidative stress-dependent tight-junction protein disruption.

Directory of Open Access Journals (Sweden)

Christoph M Zehendner

Full Text Available Re-canalization of cerebral vessels in ischemic stroke is pivotal to rescue dysfunctional brain areas that are exposed to moderate hypoxia within the penumbra from irreversible cell death. Goal of the present study was to evaluate the effect of moderate hypoxia followed by reoxygenation (MHR on the evolution of reactive oxygen species (ROS and blood-brain barrier (BBB integrity in brain endothelial cells (BEC. BBB integrity was assessed in BEC in vitro and in microvessels of the guinea pig whole brain in situ preparation. Probes were exposed to MHR (2 hours 67-70 mmHg O2, 3 hours reoxygenation, BEC or towards occlusion of the arteria cerebri media (MCAO with or without subsequent reperfusion in the whole brain preparation. In vitro BBB integrity was evaluated using trans-endothelial electrical resistance (TEER and transwell permeability assays. ROS in BEC were evaluated using 2',7'-dichlorodihydrofluorescein diacetate (DCF, MitoSox and immunostaining for nitrotyrosine. Tight-junction protein (TJ integrity in BEC, stainings for nitrotyrosine and FITC-albumin extravasation in the guinea pig brain preparation were assessed by confocal microscopy. Diphenyleneiodonium (DPI was used to investigate NADPH oxidase dependent ROS evolution and its effect on BBB parameters in BEC. MHR impaired TJ proteins zonula occludens 1 (ZO-1 and claudin 5 (Cl5, decreased TEER, and significantly increased cytosolic ROS in BEC. These events were blocked by the NADPH oxidase inhibitor DPI. MCAO with or without subsequent reoxygenation resulted in extravasation of FITC-albumin and ROS generation in the penumbra region of the guinea pig brain preparation and confirmed BBB damage. BEC integrity may be impaired through ROS in MHR on the level of TJ and the BBB is also functionally impaired in moderate hypoxic conditions followed by reperfusion in a complex guinea pig brain preparation. These findings suggest that the BBB is susceptible towards MHR and that ROS play a key role

Offset project report : Cleanit Greenit aerobic composting project

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-02-15

The Cleanit Greenit site is owned and operated by Cleanit Greenit Composting System Inc. and is a composting facility located in Edmonton, Alberta. The facility has an annual processing capacity of 20,000 tonnes of organic waste and was the first in Canada to compost a large variety of industrial by-products containing hydrocarbons, through controlled blending with other wastes and monitoring of moisture, temperature and pH. The composting process turns organic waste material from industrial, commercial and domestic sources into finished projects, thus removing these materials from conditions where treatment and disposal is often difficult, expensive and environmentally harmful. This protocol document covered the diversion of organic residues from landfill for biological decomposition to a condition sufficiently stable for nuisance-free storage and for safe use in land application. A wide variety of organic residues were considered, including agricultural and agri-food residues; the organic portion of municipal solid waste; food wastes; and forestry and landscaping wastes. The document presented information on the Cleanit Greenit project and discussed the calculation of greenhouse gas emission reductions. An appendix that contained the Cleanit Greenit aerobic composting offset project plan was also provided. tabs., figs.

Project SAIL: An Evaluation of a Dropout Prevention Program.

Science.gov (United States)

Thompson, John L.; And Others

Project SAIL (Student Advocates Inspire Learning) is a Title IV-C Project located in Hopkins, Minnesota, designed to prevent students from dropping out of school by keeping them successfully involved in the mainstream environment. This study presents a review of other dropout prevention approaches, describes the intervention strategies involved in…

Kintyre uranium project

International Nuclear Information System (INIS)

1988-04-01

This project book is designed to outline the nature of the Kintyre uranium project for those associated with the project as employees, contractors and consultants and others. It explains why Canning Resources Pty Limited and CRA Exploration believe this resource and other resources in the Rundall region should be developed. It also outlines the environmental and social issues involved and the proposed means of addressing those issues. The Kintyre resource and associated areas of geological prospectivity are located in the Rundall region on the edge of the Great Sandy Desert, in the East Pilbara region of Western Australia. Canning Resources with CRA Exploration has spent over $20 million in the past two years in intensive drilling and exploration efforts in the Kintyre area and intends to spend a further $10 million in 1988. Investigations so far reveal that the resource has features which make it competitive with the best uranium mines in the world

Detector location selection based on VIP analysis in near-infrared detection of dural hematoma

Directory of Open Access Journals (Sweden)

Qiuming Sun

2018-03-01

Full Text Available Detection of dural hematoma based on multi-channel near-infrared differential absorbance has the advantages of rapid and non-invasive detection. The location and number of detectors around the light source are critical for reducing the pathological characteristics of the prediction model on dural hematoma degree. Therefore, rational selection of detector numbers and their distances from the light source is very important. In this paper, a detector position screening method based on Variable Importance in the Projection (VIP analysis is proposed. A preliminary modeling based on Partial Least Squares method (PLS for the prediction of dural position μa was established using light absorbance information from 30 detectors located 2.0–5.0 cm from the light source with a 0.1 cm interval. The mean relative error (MRE of the dural position μa prediction model was 4.08%. After VIP analysis, the number of detectors was reduced from 30 to 4 and the MRE of the dural position μa prediction was reduced from 4.08% to 2.06% after the reduction in detector numbers. The prediction model after VIP detector screening still showed good prediction of the epidural position μa. This study provided a new approach and important reference on the selection of detector location in near-infrared dural hematoma detection. Keywords: Detector location screening, Epidural hematoma detection, Variable importance in the projection

Determining potential locations for biomass valorization using a macro screening approach

Energy Technology Data Exchange (ETDEWEB)

Van Dael, M.; Van Passel, S.; Schreurs, E. [Research Group of Environmental Economics, Centre for Environmental Sciences, Hasselt University, Agoralaan Gebouw D, 3590 Diepenbeek (Belgium); Pelkmans, L.; Guisson, R. [VITO, Boeretang 200, 2400 Mol (Belgium); Swinnen, G. [Research Group of Marketing, Hasselt University, Agoralaan Gebouw D, 3590 Diepenbeek (Belgium)

2012-10-15

European policy states that by 2020 at least 20% of final energy consumption should come from renewable energy sources. Biomass as a renewable energy source cannot be disregarded in order to attain this target. In this study a macro screening approach is developed to determine potential locations for biomass valorization in a specified region. The approach consists of five steps: (1) criteria determination, (2) data gathering, (3) weight assignment, (4) final score, (5) spatial representation. The resulting outcome provides a first well balanced scan of the possibilities for energy production using regional biomass. This way policy makers and investors can be supported and motivated to study the possibilities of building energy production plants at specific locations in more detail, which can be described as a 'micro-screening'. In our case study the approach is applied to determine the potentially interesting locations to establish a biomass project. The region has been limited to the forty-four communities in the province of Limburg (Belgium). The macro screening approach has shown to be very effective since the amount of interesting locations has been reduced drastically.

Photovoltaic projects for decentralized power supply in India: A financial evaluation

International Nuclear Information System (INIS)

Nouni, M.R.; Mullick, S.C.; Kandpal, T.C.

2006-01-01

The present study concentrates on photovoltaic (PV) projects for providing decentralized power supply in remote locations in India. Results of a techno-economic evaluation are presented. Some PV projects in the capacity range 1-110 kW p , that have either been implemented or are under implementation, have been considered. An analysis of the capital cost of the PV projects and sub-systems has been undertaken. Levelized unit cost of electricity (LUCE) has been estimated for eighteen select locations situated in different geographical regions of the country. The LUCE is found to vary in the range of Rs. 28.31-59.16/kW h (US$ 0.65-1.35/k Wh) for PV projects in the capacity range 1-25 kW p . In view of high unit cost of electricity from PV projects, need for financial incentives has been examined from the perspective of users. A sensitivity analysis has also been undertaken

Photovoltaic projects for decentralized power supply in India: A financial evaluation

International Nuclear Information System (INIS)

Nouni, M.R.; Mullick, S.C.; Kandpal, T.C.

2006-01-01

The present study concentrates on photovoltaic (PV) projects for providing decentralized power supply in remote locations in India. Results of a techno-economic evaluation are presented. Some PV projects in the capacity range 1-110 kW p , that have either been implemented or are under implementation, have been considered. An analysis of the capital cost of the PV projects and sub-systems has been undertaken. Levelized unit cost of electricity (LUCE) has been estimated for eighteen select locations situated in different geographical regions of the country. The LUCE is found to vary in the range of Rs. 28.31-59.16/kW h (US$ 0.65-1.35/k Wh) for PV projects in the capacity range 1-25 kW p . In view of high unit cost of electricity from PV projects, need for financial incentives has been examined from the perspective of users. A sensitivity analysis has also been undertaken. (Author)

Impact of mining projects on the socio-economics of the region

International Nuclear Information System (INIS)

Rao, K.R.; Yerpude, R.R.

1994-01-01

Mining of mineral deposits, if exploited economically, would generate prospects of significant employment of non-inflationary nature, in developing countries. Exploitation of remotely located mineral deposits contributes in developing inaccessible regions thereby improving socio-economics of the region benefiting the local inhabitants and supplementing the efforts towards national integration. However, an indifferent attitude of the project management towards environment and welfare of local population will result in clash of interests and perpetual litigations which not only impede progress of the project but also lead to law and order problems. A precondition for successful implementation of any project is to understand the possible impact it has, on the socio-economics of the region and educate the local inhabitants to derive optimum advantage from the project. In this paper, two cases of mining projects, one located remotely and the other close to a well developed city are studied and their impact on the socio-economics of the respective regions is presented. 5 refs., 2 figs., 1 tab

A projective approach to a language of landscape design

Directory of Open Access Journals (Sweden)

Catherine Ward Thompson

1997-10-01

Full Text Available Building on the work of Kelly (1955 in personal construct psychology, and Peled (1976, I990 in ecoanalysis, this paper develops projective techniques-which use concepts of personal and phenomenological space-as a means for articulating approaches to landscape design. The projective approach involves two stages. In stage one, projective techniques are used to elicit personal constructs (which may be held at a pre-conscious or sub-conscious level, allowing the holistic experience of landscape to be explored. In stage two, using a 'projection location task' derived from the way we experience and construe the regions of our own bodies, elements of these constructs can then be articulated so as to inform the way we interact and engage with the space around us. This gives insight into the meaning of spatial layouts, which can then be translated into a design language for the structural ordering of space. The author draws on original research conducted with children as well as adults, using projective techniques to draw out their desires and needs in relation to designing their landscape environment. The paper discusses the value of such methods for landscape designers and their clients, and outlines some ongoing research to test the validity of the projection location task.

Sapucai River Project

International Nuclear Information System (INIS)

Duarte, A.L.; Rosa, M.J.

1988-01-01

The Sapucai River Project is a gold, ilmenite, monazite and zircon alluvial deposit. It is located on Sapucai River valley in the south of Minas Gerais State. The reserves are 28.000.000 m 3 of pay bed. The production will be 1.400.000 m 3 /year and the mine's life 20 years. A cutterhead suction dredge will do the overburden removal. The pay bed will be mined with an underwater bucket-wheel dredge. The ROM will be concentrated in a washing plant. The gold will be recovered by leaching method. The other heavy minerals will be recovered by electrostatic, magnetic and gravitic methods. SAMITRI believes that it's possible to implant and operate the Project without ecological damage. (author) [pt

SAFETY MANAGEMENT FOR WOMEN THROUGH AUTOMATIC GPS LOCATION TRACKER

OpenAIRE

P.Nivetha*1, S.Kiruthika2 & J.B.Kavitha3

2018-01-01

The project “SAFETY MANAGEMENT FOR WOMEN THROUGH AUTOMATIC GPS LOCATION TRACKER” is designed using Standard Android 4.0.3 platform. The platform used to develop the application is Eclipse IDE (Mars) with Java 1.6 Standard Edition. It’s an android app which will help people in their crucial time. For example if a person is in trouble and he needs a help so there should be an app through which he/she can contact with their one to help them by just clicking on one button, it will automatically s...

Central Arkansas Energy Project. Coal to medium-Btu gas

Science.gov (United States)

1982-05-01

The Central Arkansas Energy Project has as its objective the conversion of coal in a central location to a more readily usable energy source, medium Btu gas (MBG), for use at dispersed locations as fuel for power production and steam generation, or as a feedstock for chemical processing. The project elements consist of a gasification facility to produce MBG from coal, a pipeline to supply the MBG to the dispersed sites. The end of line users investigated were the repowering or refueling of an existing Arkansas Power and Light Co. Generating station, an ammonia plant, and a combined cycle cogeneration facility for the production of steam and electricity. Preliminary design of the gasification plant including process engineering design bases, process flow diagrams, utility requirements, system description, project engineering design, equipment specifications, plot plan and section plot plans, preliminary piping and instrument diagrams, and facilities requirements. Financial analyses and sensitivities are determined. Design and construction schedules and manpower loadings are developed. It is concluded that the project is technically feasible, but the financial soundness is difficult to project due to uncertainty in energy markets of competing fuels.

The design explorer project

DEFF Research Database (Denmark)

Pejtersen, Annelise Mark; Sonnenwald, Diane H.; Buur, Jacob

1997-01-01

the 'Design Explorer' research project whose goal is to specify requirements for an information system that will effectively help design team members from different domains and organizational cultures to locate and utilize diverse information sources and interact more effectively throughout the design process....... The project introduces a new approach to support of design; instead of design guidelines, support is given by creating a transparent information environment in which designers can navigate freely according to their individual preferences. The project is based on a framework that structures the dimensions......, or categories, of domain information which need to be available for a system or product designer/design team in order to determine the characteristics of the artefact, or object of design. These dimensions include information about the different work domains in which the product plays a role during its lifetime...

US heat pump research and development projects, 1976-1986

Energy Technology Data Exchange (ETDEWEB)

Zimmerman, K.H.

1987-04-01

This document, which is an updated version of US Heat Pump Research and Development Projects, published in August 1982 by the US Department of Energy, is a compilation of one-page summaries and publication and patent information for 233 individual research and development projects on heat pumps covering the years 1976 through 1986. The majority of the projects refer to heat pumps in space-conditioning applications. The document is intended to include information on all projects in the United States for which results are publicly available. Ten different indexes are included to aid the reader in locating specific projects.

The Human Element of Project Management

Science.gov (United States)

Gillard, Sharlett

2017-01-01

Much research and dialogue have been published about project management. Studies have been conducted regarding the impact of size, member location, gender composition, cross-functional structure, stakeholder influence, confidence issues, technology usage, management style, generational differences, technical expertise vs. people skills, and a…

Overview of the Moby Dick project

NARCIS (Netherlands)

Smit, Gerardus Johannes Maria; Havinga, Paul J.M.; Mullender, Sape J.; Helme, A.; Hartvigsen, Gunnar; Fallmyr, Terje; Stabell-Kulo, Tage; Bartoli, Alberto; Dini, Gianluca; Rizzo, Luigi; Avvenuti, Marco; Seppanen, T.

The Moby Dick project focuses on developing theories, architectures and applications for a new generation of hand-held computers. The combination of an intelligent information system and a location system enables many new types of applications, such as admission control, digital chequebook, paging,

Open Source Approach to Project Management Tools

Directory of Open Access Journals (Sweden)

Romeo MARGEA

2011-01-01

Full Text Available Managing large projects involving different groups of people and complex tasks can be challenging. The solution is to use Project management software, which allows a more efficient management of projects. However, famous project management systems can be costly and may require expensive custom servers. Even if free software is not as complex as Microsoft Project, is noteworthy to think that not all projects need all the features, amenities and power of such systems. There are free and open source software alternatives that meet the needs of most projects, and that allow Web access based on different platforms and locations. A starting stage in adopting an OSS in-house is finding and identifying existing open source solution. In this paper we present an overview of Open Source Project Management Software (OSPMS based on articles, reviews, books and developers’ web sites, about those that seem to be the most popular software in this category.

MPL-Net Measurements of Aerosol and Cloud Vertical Distributions at Co-Located AERONET Sites

Science.gov (United States)

Welton, Ellsworth J.; Campbell, James R.; Berkoff, Timothy A.; Spinhirne, James D.; Tsay, Si-Chee; Holben, Brent; Starr, David OC. (Technical Monitor)

2002-01-01

In the early 1990s, the first small, eye-safe, and autonomous lidar system was developed, the Micropulse Lidar (MPL). The MPL acquires signal profiles of backscattered laser light from aerosols and clouds. The signals are analyzed to yield multiple layer heights, optical depths of each layer, average extinction-to-backscatter ratios for each layer, and profiles of extinction in each layer. In 2000, several MPL sites were organized into a coordinated network, called MPL-Net, by the Cloud and Aerosol Lidar Group at NASA Goddard Space Flight Center (GSFC) using funding provided by the NASA Earth Observing System. tn addition to the funding provided by NASA EOS, the NASA CERES Ground Validation Group supplied four MPL systems to the project, and the NASA TOMS group contributed their MPL for work at GSFC. The Atmospheric Radiation Measurement Program (ARM) also agreed to make their data available to the MPL-Net project for processing. In addition to the initial NASA and ARM operated sites, several other independent research groups have also expressed interest in joining the network using their own instruments. Finally, a limited amount of EOS funding was set aside to participate in various field experiments each year. The NASA Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) project also provides funds to deploy their MPL during ocean research cruises. All together, the MPL-Net project has participated in four major field experiments since 2000. Most MPL-Net sites and field experiment locations are also co-located with sunphotometers in the NASA Aerosol Robotic Network. (AERONET). Therefore, at these locations data is collected on both aerosol and cloud vertical structure as well as column optical depth and sky radiance. Real-time data products are now available from most MPL-Net sites. Our real-time products are generated at times of AERONET aerosol optical depth (AOD) measurements. The AERONET AOD is used as input to our

LocateP: Genome-scale subcellular-location predictor for bacterial proteins

Directory of Open Access Journals (Sweden)

Zhou Miaomiao

2008-03-01

Full Text Available Abstract Background In the past decades, various protein subcellular-location (SCL predictors have been developed. Most of these predictors, like TMHMM 2.0, SignalP 3.0, PrediSi and Phobius, aim at the identification of one or a few SCLs, whereas others such as CELLO and Psortb.v.2.0 aim at a broader classification. Although these tools and pipelines can achieve a high precision in the accurate prediction of signal peptides and transmembrane helices, they have a much lower accuracy when other sequence characteristics are concerned. For instance, it proved notoriously difficult to identify the fate of proteins carrying a putative type I signal peptidase (SPIase cleavage site, as many of those proteins are retained in the cell membrane as N-terminally anchored membrane proteins. Moreover, most of the SCL classifiers are based on the classification of the Swiss-Prot database and consequently inherited the inconsistency of that SCL classification. As accurate and detailed SCL prediction on a genome scale is highly desired by experimental researchers, we decided to construct a new SCL prediction pipeline: LocateP. Results LocateP combines many of the existing high-precision SCL identifiers with our own newly developed identifiers for specific SCLs. The LocateP pipeline was designed such that it mimics protein targeting and secretion processes. It distinguishes 7 different SCLs within Gram-positive bacteria: intracellular, multi-transmembrane, N-terminally membrane anchored, C-terminally membrane anchored, lipid-anchored, LPxTG-type cell-wall anchored, and secreted/released proteins. Moreover, it distinguishes pathways for Sec- or Tat-dependent secretion and alternative secretion of bacteriocin-like proteins. The pipeline was tested on data sets extracted from literature, including experimental proteomics studies. The tests showed that LocateP performs as well as, or even slightly better than other SCL predictors for some locations and outperforms

Genomics and the human genome project: implications for psychiatry

OpenAIRE

Kelsoe, J R

2004-01-01

In the past decade the Human Genome Project has made extraordinary strides in understanding of fundamental human genetics. The complete human genetic sequence has been determined, and the chromosomal location of almost all human genes identified. Presently, a large international consortium, the HapMap Project, is working to identify a large portion of genetic variation in different human populations and the structure and relationship of these variants to each other. The Human Genome Project h...

ITEM Project: Risk Communication on Exposure to Electromagnetic Radiation from Mobile Communications

International Nuclear Information System (INIS)

Oliveira, Carla; Carpinteiro, Goncalo; Correia, Luis M.; Fernandes, Carlos A.; Serralha, Afonso; Marques, Nuno

2004-01-01

The ITEM Project is a pioneer project in Portugal, providing public information on exposure to electromagnetic radiation, essentially due to mobile communication systems. The motivation, the main goals and the Project description are presented in this paper, as well as the website that provides the public dissemination of results and further significant information (www.lx.it.pt/item). This site provides information on different issues related to exposure to radiation, namely results of measurement campaigns conducted by a team on several locations in Portugal, and results of continuous measurements performed by autonomous stations located in public places in collaboration with municipal authorities. The global overview of the results from the measurement campaigns carried out up to present shows that all the analysed locations are in compliance with the radiation thresholds, i.e., all the electric field measured values are below the most restrictive threshold established at European level. (author)

Hydrogen generation using the modular helium reactor

International Nuclear Information System (INIS)

Richards, M.; Shenoy, A.

2004-01-01

Process heat from a high-temperature nuclear reactor can be used to drive a set of chemical reactions, with the net result of splitting water into hydrogen and oxygen. For example, process heat at temperatures in the range 850 deg.C to 950 deg.C can drive the sulfur-iodine (SI) thermochemical process to produce hydrogen with high efficiency. Electricity can also be used to split water, using conventional, low-temperature electrolysis. An example of a hybrid process is high-temperature electrolysis (HTE), in which process heat is used to generate steam, which is then supplied to an electrolyser to generate hydrogen. In this paper we investigate the coupling of the Modular Helium Reactor (MHR) to the SI process and HTE. These concepts are referred to as the H2-MHR. Optimization of the MHR core design to produce higher coolant outlet temperatures is also discussed. The use of fixed orifices to control the flow distribution is a promising design solution for increasing the coolant outlet temperature without increasing peak fuel temperatures significantly

High-temperature Gas Reactor (HTGR)

Science.gov (United States)

Abedi, Sajad

2011-05-01

General Atomics (GA) has over 35 years experience in prismatic block High-temperature Gas Reactor (HTGR) technology design. During this period, the design has recently involved into a modular have been performed to demonstrate its versatility. This versatility is directly related to refractory TRISO coated - particle fuel that can contain any type of fuel. This paper summarized GA's fuel cycle studies individually and compares each based upon its cycle sustainability, proliferation-resistance capabilities, and other performance data against pressurized water reactor (PWR) fuel cycle data. Fuel cycle studies LEU-NV;commercial HEU-Th;commercial LEU-Th;weapons-grade plutonium consumption; and burning of LWR waste including plutonium and minor actinides in the MHR. results show that all commercial MHR options, with the exception of HEU-TH, are more sustainable than a PWR fuel cycle. With LEU-NV being the most sustainable commercial options. In addition, all commercial MHR options out perform the PWR with regards to its proliferation-resistance, with thorium fuel cycle having the best proliferation-resistance characteristics.

24 CFR 990.165 - Computation of project expense level (PEL).

Science.gov (United States)

2010-04-01

... is located; location types include rural, city central metropolitan, and non-city central... ceiling for any property except for New York City Housing Authority projects, which have a $480 PUM... subsidy as provided in Attachment A of their MTW Agreements executed prior to November 18, 2005. PHAs with...

Use of the Location Inverse Solution to Reduce Ghost Images

Directory of Open Access Journals (Sweden)

Yong-Zhong Hu

2010-01-01

Full Text Available Through-the-wall imaging (TWI is a difficult but important task for both law enforcement and military missions. Acquiring information on both the internal features of a structure and the location of people inside plays an important role in many fields such as antiterrorism, hostage search and rescue, and barricade situations. Up to now, a number of promising experimental systems have been developed to validate and evaluate diverse imaging methods, most of which are based on a linear antenna array to obtain an image of the objects. However, these methods typically use the backward projection (BP algorithm based on ellipse curves, which usually generates additional ghost images. In this paper, the algorithm using the location inverse solution (LIS to reduce the ghost images is proposed and simulated. The results of simulation show that this approach is feasible.

An approach to evaluating alternatives for wind power plant locations

Directory of Open Access Journals (Sweden)

Rehman, Ateekh Ur

2016-12-01

Full Text Available Multi-criteria decision approaches are preferred for achieving multi-dimensional sustainable renewable energy goals. A more critical issue faced by the wind power industry is the selection of a location to tap prospective energy, which needs to be evaluated on multiple measures. In this paper, the aim is to assess and rank alternative wind power plant locations in Saudi Arabia. The approach presented here takes multiple criteria into consideration, such as wind speed, wind availability, site advantages, terrain details, risk and uncertainty, technology used, third party support, projected demand, types of customers, and government policies. A comparative analysis of feasible alternatives that satisfy all multi- criteria objectives is carried out. The results obtained are subjected to sensitivity analysis. Concepts such as ‘threshold values’ and ‘attribute weights’ make the approach more sensitive.

Effects of Green River Project on Cassava Farmers Production in ...

African Journals Online (AJOL)

This paper examined the effects of Green River project on cassava farmers' production in Ogba/Egbema/ Ndoni LGA of Rivers State. Purposive and stratified random sampling techniques were used to select the locations of Green River project, cooperative societies and respondents. Using structured questionnaire, a field ...

Basalt waste isolation project overview

International Nuclear Information System (INIS)

Dahlem, D.H.

1987-01-01

The proposed candidate site for a high-level nuclear waste repository is located beneath the Hanford Nuclear Reservation in southeastern Washington State. At this point, the Hanford Reservation has been selected as one of three preferred candidates in the draft environmental assessment. Project activities have concentrated on understanding the site location with respect to the 10CFR60, 40CFR191, and 10CFR960, identifying critical parameters for design of water package and repository seals, and identifying parameters for repository design. This paper describes the program to evaluate the site and to identify the natural processes that would effect isolation

Fuzzy MCDM framework for locating a nuclear power plant in Turkey

International Nuclear Information System (INIS)

Erol, İsmail; Sencer, Safiye; Özmen, Aslı; Searcy, Cory

2014-01-01

Turkey has recently initiated a project to revise its nuclear policy. The revised nuclear energy policy considers searching for possible alternative locations for future nuclear power plants in Turkey. At the most basic level, the public cannot accurately evaluate whether it is willing to support nuclear energy unless it has an idea about where the power plants are likely to be located. It is argued that the selection of a facility location is a multi-criteria decision-making problem including both quantitative and qualitative criteria. In this research, given the multi-criteria nature of the nuclear facility location selection problem, a new decision tool is proposed to rank the alternative nuclear power plant sites in Turkey. The proposed tool is based on fuzzy Entropy and t norm based fuzzy compromise programming to deal with the vagueness of human judgments. Finally, a discussion and some concluding remarks are provided. - Highlights: • Fuzzy MCDM approach is developed to select nuclear power plant location in Turkey. • The proposed framework employs fuzzy entropy and fuzzy compromise programming. • A criterion set was developed using a map by The Turkish Atomic Energy Authority. • Cilingoz is found to be the best with the index values 0.6584 and 0.0838. • The proposed tool can be considered a tool to evaluate the alternative sites

Uncertainty Analyses for Back Projection Methods

Science.gov (United States)

Zeng, H.; Wei, S.; Wu, W.

2017-12-01

So far few comprehensive error analyses for back projection methods have been conducted, although it is evident that high frequency seismic waves can be easily affected by earthquake depth, focal mechanisms and the Earth's 3D structures. Here we perform 1D and 3D synthetic tests for two back projection methods, MUltiple SIgnal Classification (MUSIC) (Meng et al., 2011) and Compressive Sensing (CS) (Yao et al., 2011). We generate synthetics for both point sources and finite rupture sources with different depths, focal mechanisms, as well as 1D and 3D structures in the source region. The 3D synthetics are generated through a hybrid scheme of Direct Solution Method and Spectral Element Method. Then we back project the synthetic data using MUSIC and CS. The synthetic tests show that the depth phases can be back projected as artificial sources both in space and time. For instance, for a source depth of 10km, back projection gives a strong signal 8km away from the true source. Such bias increases with depth, e.g., the error of horizontal location could be larger than 20km for a depth of 40km. If the array is located around the nodal direction of direct P-waves the teleseismic P-waves are dominated by the depth phases. Therefore, back projections are actually imaging the reflection points of depth phases more than the rupture front. Besides depth phases, the strong and long lasted coda waves due to 3D effects near trench can lead to additional complexities tested here. The strength contrast of different frequency contents in the rupture models also produces some variations to the back projection results. In the synthetic tests, MUSIC and CS derive consistent results. While MUSIC is more computationally efficient, CS works better for sparse arrays. In summary, our analyses indicate that the impact of various factors mentioned above should be taken into consideration when interpreting back projection images, before we can use them to infer the earthquake rupture physics.

Location and identification of radioactive waste in Massachusetts Bay

International Nuclear Information System (INIS)

Colton, D.P.; Louft, H.L.

1993-01-01

The accurate location and identification of hazardous waste materials dumped in the world's oceans are becoming an increasing concern. For years, the oceans have been viewed as a convenient and economical place to dispose of all types of waste. In all but a few cases, major dump sites have been closed leaving behind years of accumulated debris. The extent of past environmental damage, the possibility of continued environmental damage, and the possibility of hazardous substances reaching the human food chain need to be carefully investigated. This paper reports an attempt to accurately locate and identify the radioactive component of the waste material. The Department of Energy's Remote Sensing Laboratory (RSL), in support of the US Environmental Protection Agency (EPA), provided the precision navigation system and prototype underwater radiological monitoring equipment that were used during this project. The paper also describes the equipment used, presents the data obtained, and discusses future equipment development

Final Technical Report: The Water-to-Wire (W2W) Project

Energy Technology Data Exchange (ETDEWEB)

Lissner, Daniel N. [Free Flow Power Corporation, Boston, MA (United States); Edward, Lovelace C. [Free Flow Power Corporation, Boston, MA (United States)

2013-12-24

The purpose of the Free Flow Power (FFP) Water-to-Wire Project (Project) was to evaluate and optimize the performance, environmental compatibility, and cost factors of FFP hydrokinetic turbines through design analyses and deployments in test flumes and riverine locations.

Cogeneration for small SAGD projects

Energy Technology Data Exchange (ETDEWEB)

Albion, Stuart [AMEC BDR Limited (United Kingdom)

2011-07-01

As many SAGD projects are being developed in remote locations, the supply of a steady source of power to them becomes an important question. Connecting these remote facilities to a grid can often be difficult and costly. This presentation, by AMEC BDR Limited, promotes the use of cogeneration in small SAGD projects. Cogeneration is the generation of two forms of energy from one fuel source. In this particular case, the energy forms would be electricity and heat. In many SAGD projects, a gas turbine system is used to generate the electricity, while a heat recovery system is utilized to generate steam. The use of cogeneration systems in SAGD projects, as opposed to using separate heat and electricity systems, has the potential to significantly reduce the amount of energy lost, the amount of emissions and power costs, in addition to ensuring that there is a reliable supply of steam and electricity.

User's operating procedures. Volume 1: Scout project information programs

Science.gov (United States)

Harris, C. G.; Harris, D. K.

1985-01-01

A review of the user's operating procedures for the Scout Project Automatic Data System, called SPADS is given. SPADS is the result of the past seven years of software development on a Prime minicomputer located at the Scout Project Office. SPADS was developed as a single entry, multiple cross reference data management and information retrieval system for the automation of Project office tasks, including engineering, financial, managerial, and clerical support. The instructions to operate the Scout Project Information programs in data retrieval and file maintenance via the user friendly menu drivers is presented.

Location-based language learning for migrants in a smart city

OpenAIRE

Gaved, Mark; Peasgood, Alice

2015-01-01

The SALSA (Sensors and Apps for Languages in Smart Areas) project, a winner of the Open University’s MK:Smart Open Challenge awards, is investigating how a smart city infrastructure can enable the provision of highly accurate, location-based learning activities for language learners, particularly recent migrants who have a real need to learn the language of their new home. \\ud \\ud Second language acquisition is perceived by adult migrants themselves, as well as host governments, “as a crucial...

Jabiluka uranium project

International Nuclear Information System (INIS)

Anon.

1991-01-01

The Jabiluka uranium and gold deposit located in the Northern Territory of Australia is the world's largest known primary uranium deposits and as such has the potential to become one of the most important uranium projects in the world. Despite the financial and structural challenges facing the major owner Pancontinental Mining Limited and the changing political policies in Australia, Jabiluka is well situated for development during the 1990's. With the availability of numerous financial and development alternatives, Jabiluka could, by the turn of the century, take its rightful place among the first rank of world uranium producers. The paper discusses ownership, location, property rights, licensing, environmental concerns, marketing and development, capital costs, royalties, uranium policy considerations, geologic exploration history, regional and site geology, and mining and milling operations

Are Project Developers Knights and Researchers Queens?

DEFF Research Database (Denmark)

Vinstrup, Anya Bjørn

2014-01-01

How do project developers at universities view their customers – the researchers, and how do they see themselves as a profession? Does this view influence their motivation and what challenges does it impose? Taking elements of theory from Public Service Motivation (PSM) and linking it with a small...... empirically based survey among the project developers at a centrally located office at a university in Denmark – these questions are sought to be answered. The focal point being the motivation of the project developer, with special emphasis on their user perception, and the practical implications it has...... for leadership and organisational structures....

Capital structure in LNG infrastructures and gas pipelines projects: Empirical evidences and methodological issues

International Nuclear Information System (INIS)

Pierru, Axel; Roussanaly, Simon; Sabathier, Jérôme

2013-01-01

This paper provides new empirical insights on the capital structure of project-financed LNG infrastructures and gas pipeline projects, by using data relating to projects whose financial close occurred between June 2004 and March 2011. Most results are consistent with the basic view of risk-averse funds suppliers. Especially, the projects located in risky countries and larger projects tend to exhibit lower debt ratios and less-concentrated equity ownerships. In addition, regasification projects appear to have a more diluted equity ownership. Methodological issues raised by the financing of these projects are also examined from a capital-budgeting perspective. In particular, the equity residual method, usually used by industrial practitioners to value these projects, should be adjusted. - Highlights: • This paper provides new empirical insights on the capital structure of project-financed LNG and gas pipeline infrastructures. • Most of our results are consistent with the basic view of risk-averse funds suppliers. • Projects located in risky countries exhibit lower debt ratios and less-concentrated equity ownerships. • Larger projects and regasification projects also have less concentrated equity ownerships. • From a capital-budgeting viewpoint, we examine methodological issues raised by the financing of these projects

PARTNER Project

CERN Multimedia

Ballantine, A; Dixon-Altaber, H; Dosanjh, M; Kuchina, L

2011-01-01

Hadrontherapy uses particle beams to treat tumours located near critical organs and tumours that respond poorly to conventional radiation therapy. It has become evident that there is an emerging need for reinforcing research in hadrontherapy and it is essential to train professionals in this rapidly developing field. PARTNER is a 4-year Marie Curie Training project funded by the European Commission with 5.6 million Euros aimed at the creation of the next generation of experts. Ten academic institutes and research centres and two leading companies are participating in PARTNER, that is coordinated by CERN, forming a unique multidisciplinary and multinational European network. The project offers research and training opportunities to 25 young biologists, engineers, physicians and physicists and is allowing them to actively develop modern techniques for treating cancer in close collaboration with leading European Institutions. For this purpose PARTNER relies on cutting edge research and technology development, ef...

The European Location Framework - from National to European

Science.gov (United States)

Pauknerova, E.; Sidlichovsky, P.; Urbanas, S.; Med, M.

2016-06-01

The European Location Framework (ELF) means a technical infrastructure which will deliver authoritative, interoperable geospatial reference data from all over Europe for analysing and understanding information connected to places and features. The ELF has been developed and set up through the ELF Project, which has been realized by a consortium of partners (public, private and academic organisations) since March 2013. Their number increased from thirty to forty in the year 2016, together with a project extension from 36 to 44 months. The project is co-funded by the European Commission's Competitiveness and Innovation Framework Programme (CIP) and will end in October 2016. In broad terms, the ELF Project will deliver a unique gateway to the authoritative reference geospatial information for Europe (harmonised pan-European maps, geographic and land information) sourced from the National Mapping and Cadastral Authorities (NMCAs) around Europe and including transparent licensing. This will be provided as an online ELF web service that will deliver an up-to-date topographic base map and also as view & download services for access to the ELF datasets. To develop and build up the ELF, NMCAs are accompanied and collaborate with several research & academia institutes, a standardisation body, system integrators, software developers and application providers. The harmonisation is in progress developing and triggering a number of geo-tools like edge-matching, generalisation, transformation and others. ELF will provide also some centralised tools like Geo Locator for searching location based on geographical names, addresses and administrative units, and GeoProduct Finder for discovering the available web-services and licensing them. ELF combines national reference geo-information through the ELF platform. ELF web services will be offered to users and application developers through open source (OSKARI) and proprietary (ArcGIS Online) cloud platforms. Recently, 29 NMCAs plus the

An exergoeconomic assessment of waste heat recovery from a Gas Turbine-Modular Helium Reactor using two transcritical CO_2 cycles

International Nuclear Information System (INIS)

Wang, Xurong; Dai, Yiping

2016-01-01

Highlights: • A Gas Turbine-Modular Helium Reactor is coupled with two transcritical CO_2 cycles. • Exergoeconomic analysis and optimization of the combined cycle was performed. • The energy efficiency of the cogeneration system was enhanced by 7.92% at 850 °C. • The overall exergoeconomic factor of the system could up to 55.2%. - Abstract: A comprehensive study is performed on an energy conversion system which combines a gas turbine-modular helium reactor (GT-MHR) and two transcritical CO_2 cycles (tCO_2). The aim of this study is to assess the energy, exergy and economic behavior of the proposed system, considering five indicators: the energy efficiency, the exergy efficiency, the total exergy destruction cost rate, the overall exergoeconomic factor and the total cost rate. A parametric study is also conducted to evaluate the influence of key decision variables on the GT-MHR/tCO_2 performance. Finally, the combined cycle is optimized to minimize the total cost rate. The results show that the energy efficiency of GT-MHR/tCO_2 cycle is 7.92% higher than that of the simple GT-MHR cycle at 850 °C. The largest exergy destruction rate takes place in the reactor, and after that in the helium turbine and the recuperator. The components in tCO_2 cycles have less exergy destruction. When the optimization is conducted based on the exergoeconomics, the overall exergoeconomic factor, the total cost rate and the total exergy destruction cost rate are 55.2%, 20,752 $/h and 9292 $/h, respectively.

Combining a gas turbine modular helium reactor and an accelerator and for near total destruction of weapons grade plutonium

Energy Technology Data Exchange (ETDEWEB)

Baxter, A.M.; Lane, R.K.; Sherman, R. [General Atomics, San Diego, CA (United States)

1995-10-01

Fissioning surplus weapons-grade plutonium (WG-Pu) in a reactor is an effective means of rendering this stockpile non-weapons useable. In addition the enormous energy content of the plutonium is released by the fission process and can be captured to produce valuable electric power. While no fission option has been identified that can accomplish the destruction of more than about 70% of the WG-Pu without repeated reprocessing and recycling, which presents additional opportunities for diversion, the gas turbine modular helium-cooled reactor (GT-MHR), using an annular graphite core and graphite inner and outer reflectors combines the maximum plutonium destruction and highest electrical production efficiency and economics in an inherently safe system. Accelerator driven sub-critical assemblies have also been proposed for WG-Pu destruction. These systems offer almost complete WG-Pu destruction, but achieve this goal by using circulating aqueous or molten salt solutions of the fuel, with potential safety implications. By combining the GT-MHR with an accelerator-driven sub-critical MHR assembly, the best features of both systems can be merged to achieve the near total destruction of WG-Pu in an inherently safe, diversion-proof system in which the discharged fuel elements are suitable for long term high level waste storage without the need for further processing. More than 90% total plutonium destruction, and more than 99.9% Pu-239 destruction, could be achieved. The modular concept minimizes the size of each unit so that both the GT-MHR and the accelerator would be straightforward extensions of current technology.

Location-based prospective memory.

Science.gov (United States)

O'Rear, Andrea E; Radvansky, Gabriel A

2018-02-01

This study explores location-based prospective memory. People often have to remember to do things when in a particular location, such as buying tissues the next time they are in the supermarket. For event cognition theory, location is important for structuring events. However, because event cognition has not been used to examine prospective memory, the question remains of how multiple events will influence prospective memory performance. In our experiments, people delivered messages from store to store in a virtual shopping mall as an ongoing task. The prospective tasks were to do certain activities in certain stores. For Experiment 1, each trial involved one prospective memory task to be done in a single location at one of three delays. The virtual environment and location cues were effective for prospective memory, and performance was unaffected by delay. For Experiment 2, each trial involved two prospective memory tasks, given in either one or two instruction locations, and to be done in either one or two store locations. There was improved performance when people received instructions from two locations and did both tasks in one location relative to other combinations. This demonstrates that location-based event structure influences how well people perform on prospective memory tasks.

Internet Geo-Location

Science.gov (United States)

2017-12-01

INTERNET GEO-LOCATION DUKE UNIVERSITY DECEMBER 2017 FINAL TECHNICAL REPORT APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED STINFO COPY AIR...REPORT TYPE FINAL TECHNICAL REPORT 3. DATES COVERED (From - To) MAY 2014 – MAY 2017 4. TITLE AND SUBTITLE INTERNET GEO-LOCATION 5a. CONTRACT...of SpeedTest servers that are used by end users to measure the speed of their Internet connection. The servers log the IP address and the location

A projective surgical navigation system for cancer resection

Science.gov (United States)

Gan, Qi; Shao, Pengfei; Wang, Dong; Ye, Jian; Zhang, Zeshu; Wang, Xinrui; Xu, Ronald

2016-03-01

Near infrared (NIR) fluorescence imaging technique can provide precise and real-time information about tumor location during a cancer resection surgery. However, many intraoperative fluorescence imaging systems are based on wearable devices or stand-alone displays, leading to distraction of the surgeons and suboptimal outcome. To overcome these limitations, we design a projective fluorescence imaging system for surgical navigation. The system consists of a LED excitation light source, a monochromatic CCD camera, a host computer, a mini projector and a CMOS camera. A software program is written by C++ to call OpenCV functions for calibrating and correcting fluorescence images captured by the CCD camera upon excitation illumination of the LED source. The images are projected back to the surgical field by the mini projector. Imaging performance of this projective navigation system is characterized in a tumor simulating phantom. Image-guided surgical resection is demonstrated in an ex-vivo chicken tissue model. In all the experiments, the projected images by the projector match well with the locations of fluorescence emission. Our experimental results indicate that the proposed projective navigation system can be a powerful tool for pre-operative surgical planning, intraoperative surgical guidance, and postoperative assessment of surgical outcome. We have integrated the optoelectronic elements into a compact and miniaturized system in preparation for further clinical validation.

Freqüência cardíaca máxima em testes de exercício em esteira rolante e em cicloergômetro de membros inferiores Maximal heart rate in exercise tests on treadmill and in a cycloergometer of lower limbs

Directory of Open Access Journals (Sweden)

Claudio Gil Soares de Araújo

2005-07-01

Full Text Available OBJETIVO: Comparar, retrospectivamente, os valores de freqüência cardíaca máxima (FCM e o descenso da freqüência cardíaca no primeiro minuto da recuperação (dFC, obtidos em teste de exercício (TE realizados em dois ergômetros e momentos distintos. MÉTODOS: Sessenta indivíduos (29 a 80 anos de idade, submetidos a TE cardiopulmonar em ciclo de membros inferiores (CMI em nosso laboratório e que possuíam TE prévio (até 36 meses em esteira (EST em outros laboratórios, nas condições idênticas de medicações de ação cronotrópica negativa. RESULTADOS: FCM foi semelhante no CMI: 156±3 e EST: 154±2 bpm (p=0,125, enquanto o dFC foi maior em CMI: 33±2, EST: 26±3 bpm (média ± erro padrão da média (pOBJECTIVE: To compare, retrospectively, the values of maximum heart rate (MHR and the decrease of the heart rate at the first minute of recovery, which were obtained in an exercise test (ET performed in two different ergometers and at different moments. METHODS: Sixty individuals (from 29 to 80 years old, submitted to cardiopulmonary ET in a cycle of lower limbs (CLL in our laboratory and who had previous ET (up to 36 months in a treadmill (TRM in other laboratories, under identical conditions of medications of negative chronotropic action. RESULTS: MHR was similar in CLL: 156±3 and TRM: 154±2 bpm (p=0.125, whereas dHR was higher in CLL: 33±2, EST: 26±3 bpm (mean ± standard error of the mean (p<0.001. In hemodynamic variables studied, the systolic blood pressure and the double product were higher in the ET-CLL (p<0.001. The electrocardiogram (ECG was similar in both ETs, except due to more frequent supraventricular arrhythmias in CLL. CONCLUSION: a With some diligence from the examiner and previous knowledge of MHR in a previous ET it is possible to obtain high levels of MHR in an ET-CLL; b interrupting the MHR-based ET forecast through equations tends to lead to sub-maximum efforts; c dHR differs in active and passive

Location Privacy with Randomness Consistency

Directory of Open Access Journals (Sweden)

Wu Hao

2016-10-01

Full Text Available Location-Based Social Network (LBSN applications that support geo-location-based posting and queries to provide location-relevant information to mobile users are increasingly popular, but pose a location-privacy risk to posts. We investigated existing LBSNs and location privacy mechanisms, and found a powerful potential attack that can accurately locate users with relatively few queries, even when location data is well secured and location noise is applied. Our technique defeats previously proposed solutions including fake-location detection and query rate limits.

Commercial milk distribution profiles and production locations

International Nuclear Information System (INIS)

Deonigi, D.E.; Anderson, D.M.; Wilfert, G.L.

1994-04-01

The Hanford Environmental Dose Reconstruction (HEDR) Project was established to estimate radiation doses that people could have received from nuclear operations at the Hanford Site since 1944. For this period iodine-131 is the most important offsite contributor to radiation doses from Hanford operations. Consumption of milk from cows that ate vegetation contaminated by iodine-131 is the dominant radiation pathway for individuals who drank milk (Napier 1992). Information has been developed on commercial milk cow locations and commercial milk distribution during 1945 and 1951. The year 1945 was selected because during 1945 the largest amount of iodine-131 was released from Hanford facilities in a calendar year (Heeb 1993); therefore, 1945 was the year in which an individual was likely to have received the highest dose. The year 1951 was selected to provide data for comparing the changes that occurred in commercial milk flows (i.e., sources, processing locations, and market areas) between World War II and the post-war period. To estimate the doses people could have received from this milk flow, it is necessary to estimate the amount of milk people consumed, the source of the milk, the specific feeding regime used for milk cows, and the amount of iodine-131 contamination deposited on feed

Location constrained resource interconnection

International Nuclear Information System (INIS)

Hawkins, D.

2008-01-01

This presentation discussed issues related to wind integration from the perspective of the California Independent System Operator (ISO). Issues related to transmission, reliability, and forecasting were reviewed. Renewable energy sources currently used by the ISO were listed, and details of a new transmission financing plan designed to address the location constraints of renewable energy sources and provide for new transmission infrastructure was presented. The financing mechanism will be financed by participating transmission owners through revenue requirements. New transmission interconnections will include network facilities and generator tie-lines. Tariff revisions have also been implemented to recover the costs of new facilities and generators. The new transmission project will permit wholesale transmission access to areas where there are significant energy resources that are not transportable. A rate impact cap of 15 per cent will be imposed on transmission owners to mitigate short-term costs to ratepayers. The presentation also outlined energy resource area designation plans, renewable energy forecasts, and new wind technologies. Ramping issues were also discussed. It was concluded that the ISO expects to ensure that 20 per cent of its energy will be derived from renewable energy sources. tabs., figs

Evaluating the Impact of Regional Marketing Projects on the Development of Regions from Different Stakeholder Perspectives

Directory of Open Access Journals (Sweden)

Kunze Kim-Kathrin

2014-01-01

Full Text Available In the competition for economically attractive stakeholders, regions have to implement strategies to gain and adhere those interest groups. Empirical studies concerning the migration motivations show that it is not only labor market but also soft locational factors of the social environment, nature and landscape that are of high importance: A majority of the population is willing to move or rather stay at a special place because of such soft locational factors. This study examines the impact of regional marketing projects on the development of regions from the perspectives of inhabitants and tourists as well as general attributes to measure a region’s attractiveness from the perspective of high potentials. We argue that those projects that fit to the region and its unique selling propositions contribute to positioning and building location brand value. We show that projects have a socio-economic effect on the attitude towards regions and contribute to building location brand value. An analysis of group differences shows that the project influence on the region and region attractiveness are perceived in significantly different manner depending on the knowledge level of the stakeholder group. Consequently, one should increase the awareness of marketing activities and regions and focus on soft locational factors while establishing and positioning a region brand.

Neural network AE source location apart from structure size and material

Czech Academy of Sciences Publication Activity Database

Chlada, Milan; Převorovský, Zdeněk; Blaháček, Michal

2010-01-01

Roč. 28, - (2010), s. 99-107 ISSN 0730-0050. [European Conference on Acoustic Emission Testing 2010 /29./. Vídeň, 08.09.2010-10.09.2010] R&D Projects: GA ČR(CZ) GAP104/10/1430; GA MPO(CZ) FR-TI1/274 Institutional research plan: CEZ:AV0Z20760514 Keywords : AE source location * artificial neural network * arrival time profiles Subject RIV: BI - Acoustics http://www.ndt.net/search/abstract.php3?AbsID=10828

Energy research information system projects report, volume 5, number 1

Science.gov (United States)

Johnson, J.; Schillinger, L.

1980-07-01

The system (ERIS) provides an inventory of the energy related programs and research activities from 1974 to the present in the states of Montana, Nebraska, North Dakota, South Dakota and Wyoming. Areas of research covered include coal, reclamation, water resources, environmental impacts, socioeconomic impacts, energy conversion, mining methodology, petroleum, natural gas, oilshale, renewable energy resources, nuclear energy, energy conservation and land use. Each project description lists title, investigator(s), research institution, sponsor, funding, time frame, location, a descriptive abstract of the research and title reports and/or publications generated by the research. All projects are indexed by location, personal names, organizations and subject keywords.

Smartphones as locative media

CERN Document Server

Frith, Jordan

2015-01-01

Smartphone adoption has surpassed 50% of the population in more than 15 countries, and there are now more than one million mobile applications people can download to their phones. Many of these applications take advantage of smartphones as locative media, which is what allows smartphones to be located in physical space. Applications that take advantage of people's location are called location-based services, and they are the focus of this book. Smartphones as locative media raise important questions about how we understand the complicated relationship between the Internet and physical space

Dealing with Insufficient Location Fingerprints in Wi-Fi Based Indoor Location Fingerprinting

Directory of Open Access Journals (Sweden)

Kai Dong

2017-01-01

Full Text Available The development of the Internet of Things has accelerated research in the indoor location fingerprinting technique, which provides value-added localization services for existing WLAN infrastructures without the need for any specialized hardware. The deployment of a fingerprinting based localization system requires an extremely large amount of measurements on received signal strength information to generate a location fingerprint database. Nonetheless, this requirement can rarely be satisfied in most indoor environments. In this paper, we target one but common situation when the collected measurements on received signal strength information are insufficient, and show limitations of existing location fingerprinting methods in dealing with inadequate location fingerprints. We also introduce a novel method to reduce noise in measuring the received signal strength based on the maximum likelihood estimation, and compute locations from inadequate location fingerprints by using the stochastic gradient descent algorithm. Our experiment results show that our proposed method can achieve better localization performance even when only a small quantity of RSS measurements is available. Especially when the number of observations at each location is small, our proposed method has evident superiority in localization accuracy.

Battery Energy Storage Market: Commercial Scale, Lithium-ion Projects in the U.S.

Energy Technology Data Exchange (ETDEWEB)

McLaren, Joyce; Gagnon, Pieter; Anderson, Kate; Elgqvist, Emma; Fu, Ran; Remo, Tim

2016-10-01

This slide deck presents current market data on the commercial scale li-ion battery storage projects in the U.S. It includes existing project locations, cost data and project cost breakdown, a map of demand charges across the U.S. and information about how the ITC and MACRS apply to energy storage projects that are paired with solar PV technology.

Inventory of current environmental monitoring projects in the US-Canadian transboundary region

Energy Technology Data Exchange (ETDEWEB)

Glantz, C.S.; Ballinger, M.Y.; Chapman, E.G.

1986-05-01

This document presents the results of a study commissioned to survey and summarize major environmental monitoring projects in the US-Canadian transboundary region. Projects with field sites located within 400 km (250 mi) of the border and active after 1980 were reviewed. The types of projects included: ambient air-quality monitoring, ambient water-quality monitoring, deposition monitoring, forest/vegetation monitoring and research, soil studies, and ecosystem studies. Ecosystem studies included projects involving the measurement of parameters from more than one monitoring category (e.g., studies that measured both water and soil chemistry). Individual descriptions were formulated for 184 projects meeting the spatial and temporal criteria. Descriptions included the official title for the project, its common abbreviation, program emphasis, monitoring site locations, time period conducted, parameters measured, protocols employed, frequency of sample collection, data storage information, and the principal contact for the project. A summary inventory subdivided according to the six monitoring categories was prepared using a computerized data management system. Information on major centralized data bases in the field of environmental monitoring was also obtained, and summary descriptions were prepared. The inventory and data base descriptions are presented in appendices to this document.

Comprehensive report to Congress, Clean Coal Technology program: Pinon Pine IGCC Power Project

International Nuclear Information System (INIS)

1992-06-01

The objective of the proposed project is to demonstrate an advanced IGCC system based upon the air-blown, fluidized-bed KRW gasifier with in-bed desulfurization using limestone sorbent and an external fixed- bed zinc ferrite sulfur removal system. Sierra Pacific Power Company (SPPC) requested financial assistance from DOE for the design, construction, and operation of a nominal 800 ton-per-day (86-Megawatt gross), air blown integrated gasification combined-cycle (IGCC) demonstration plant. The project, named the Pinon Pine IGCC Power Project, is to be located at SPPC's Tracy Station, a power generation facility located on a rural 400-acre plot about 17 miles east of Reno. The demonstration plant will produce electrical power for the utility grid. The project, including the demonstration phase, will last 96 months at a total cost of $269,993,100. DOE's share of the project cost will be 50 percent, or $134,996,550

Law Enforcement Locations

Data.gov (United States)

Kansas Data Access and Support Center — Law Enforcement Locations in Kansas Any location where sworn officers of a law enforcement agency are regularly based or stationed. Law enforcement agencies "are...

Locating karst depressed columns by means of Rn measurement on the surface

International Nuclear Information System (INIS)

Tang Daimao; Liu Hongfu; Duan Hongjie; Duan Lindi; Sui Haichen

1999-01-01

The coal mining and the related surface projects are extremely harassed by the underground karst depressed columns. The author discussed the surface Rn concentration's abnormality caused by the karst depressed columns. It is concluded that different kinds of karst depressed column can cause different Rn concentration's abnormality. The α-cup Rn measuring instrument was used for detecting Rn abnormality on the surface in order to locate the underground karst depressed columns

77 FR 7574 - Grand Coulee Project Hydroelectric Authority; Notice of Preliminary Permit Application Accepted...

Science.gov (United States)

2012-02-13

... Project Hydroelectric Authority; Notice of Preliminary Permit Application Accepted for Filing and Soliciting Comments and Motions To Intervene On January 13, 2012, the Grand Coulee Project Hydroelectric... study the feasibility of the P.E. Scooteney Wasteway Hydroelectric Project, to be located on the P.E...

75 FR 352 - Enloe Hydroelectric Project; Notice of Application Ready for Environmental Analysis and...

Science.gov (United States)

2010-01-05

... Hydroelectric Project; Notice of Application Ready for Environmental Analysis and Soliciting Comments... hydroelectric application has been filed with the Commission and is available for public inspection. a. Type of... Utility District No. 1 of Okanogan County. e. Name of Project: Enloe Hydroelectric Project. f. Location...

76 FR 64943 - Proposed Cercla Administrative Cost Recovery Settlement; ACM Smelter and Refinery Site, Located...

Science.gov (United States)

2011-10-19

... Settlement; ACM Smelter and Refinery Site, Located in Cascade County, MT AGENCY: Environmental Protection... projected future response costs concerning the ACM Smelter and Refinery NPL Site (Site), Operable Unit 1..., Helena, MT 59626. Mr. Sturn can be reached at (406) 457-5027. Comments should reference the ACM Smelter...

Imperial County geothermal development annual meeting: summary

Energy Technology Data Exchange (ETDEWEB)

1983-01-01

All phases of current geothermal development in Imperial County are discussed and future plans for development are reviewed. Topics covered include: Heber status update, Heber binary project, direct geothermal use for high-fructose corn sweetener production, update on county planning activities, Brawley and Salton Sea facility status, status of Imperial County projects, status of South Brawley Prospect 1983, Niland geothermal energy program, recent and pending changes in federal procedures/organizations, plant indicators of geothermal fluid on East Mesa, state lands activities in Imperial County, environmental interests in Imperial County, offshore exploration, strategic metals in geothermal fluids rebuilding of East Mesa Power Plant, direct use geothermal potential for Calipatria industrial Park, the Audubon Society case, status report of the Cerro Prieto geothermal field, East Brawley Prospect, and precision gravity survey at Heber and Cerro Prieto geothermal fields. (MHR)

Project Selection and Transparency Factors in Housing Public-Private Partnerships in Nigeria

Directory of Open Access Journals (Sweden)

Eziyi Offia Ibem

2018-06-01

Full Text Available The application of Public-Private Partners (PPPs in housing provisioning is on the increase across the world. However, there is a paucity of empirical studies on the specific factors considered at the initiation, and measures taken to ensure transparency at the procurement stages, of PPP housing projects. This study examined project selection factors and transparency measures in PPP housing projects using data sourced from oral interviews with 27 experts in nine PPP housing schemes in Nigeria. Results of the content analysis revealed that the top two selection factors considered by both the public and private sector operators of PPP housing projects in Nigeria are the availability of land and viability of the funding arrangements. Whereas the public-sector partners also consider the availability of competent private sector to deliver the projects, the private developers are concerned with the location of proposed projects. It was also found that the two key measures taken to ensure transparency at the procurement stage of the projects are transparent and competitive bidding and open advertisements of tender opportunities. These imply that before embarking on PPP housing projects, operators should ensure that there is available land in good locations, sound funding arrangements, and measures for achieving transparency in the schemes.

Malheur River Wildlife Mitigation Project : 2008 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Kesling, Jason; Abel, Chad; Schwabe, Laurence

2009-01-01

In 1998, the Burns Paiute Tribe (BPT) submitted a proposal to Bonneville Power Administration (BPA) for the acquisition of the Malheur River Wildlife Mitigation Project (Project). The proposed mitigation site was for the Denny Jones Ranch and included Bureau of Land Management (BLM) and Oregon Division of State Lands (DSL) leases and grazing allotments. The Project approval process and acquisition negotiations continued for several years until the BPT and BPA entered into a Memorandum of Agreement, which allowed for purchase of the Project in November 2000. The 31,781 acre Project is located seven miles east of Juntura, Oregon and is adjacent to the Malheur River (Figure 1). Six thousand three hundred eighty-five acres are deeded to BPT, 4,154 acres are leased from DSL, and 21,242 acres are leased from BLM (Figure 2). In total 11 grazing allotments are leased between the two agencies. Deeded land stretches for seven miles along the Malheur River. It is the largest private landholding on the river between Riverside and Harper, Oregon. Approximately 938 acres of senior water rights are included with the Ranch. The Project is comprised of meadow, wetland, riparian and shrub-steppe habitats. The BLM grazing allotment, located south of the ranch, is largely shrub-steppe habitat punctuated by springs and seeps. Hunter Creek, a perennial stream, flows through both private and BLM lands. Similarly, the DSL grazing allotment, which lies north of the Ranch, is predominantly shrub/juniper steppe habitat with springs and seeps dispersed throughout the upper end of draws (Figure 2).

Use of Loran-C navigation system to accurately determine sampling site location in an above ground cooling reservoir

International Nuclear Information System (INIS)

Lockwood, R.E.; Blankinship, D.R.

1994-01-01

Environmental monitoring programs often require accurate determination of sampling site locations in aquatic environments. This is especially true when a open-quotes pictureclose quotes of high resolution is needed for observing a changing variable in a given area and location is assumed to be important to the distribution of that variable. Sample site location can be difficult if few visible land marks are available for reference on a large body of water. The use of navigational systems such as Global Positioning System (GPS) and its predecessor, Loran-C, provide an excellent method for sample site location. McFarland (1992) discusses the practicality of GPS for location determination. This article discusses the use of Loran-C in a sampling scheme implemented at the South Texas Project Electrical Generating Station (STPEGS), Wadsworth, Texas

Location | FNLCR Staging

Science.gov (United States)

The Frederick National Laboratory for Cancer Research campus is located 50 miles northwest of Washington, D.C., and 50 miles west of Baltimore, Maryland, in Frederick, Maryland. Satellite locations include leased and government facilities extending s

Privacy for location-based services

CERN Document Server

Ghinita, Gabriel

2013-01-01

Sharing of location data enables numerous exciting applications, such as location-based queries, location-based social recommendations, monitoring of traffic and air pollution levels, etc. Disclosing exact user locations raises serious privacy concerns, as locations may give away sensitive information about individuals' health status, alternative lifestyles, political and religious affiliations, etc. Preserving location privacy is an essential requirement towards the successful deployment of location-based applications. These lecture notes provide an overview of the state-of-the-art in locatio

75 FR 39492 - Major Capital Investment Projects

Science.gov (United States)

2010-07-09

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration 49 CFR Part 611 [Docket No. FTA-2010-0009] RIN 2132-AB02 Major Capital Investment Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Public meetings on ANPRM. SUMMARY: This document announces the date, time, and location of an...

75 FR 33757 - Major Capital Investment Projects

Science.gov (United States)

2010-06-15

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration 49 CFR Part 611 [Docket No. FTA-2010-0009] RIN 2132-AB02 Major Capital Investment Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Public meetings on ANPRM. SUMMARY: This document announces the dates, times, and locations of...

Fuel Cell Demonstration Project - 200 kW - Phosphoric Acid Fuel Cell Power Plant Located at the National Transportation Research Center: FINAL REPORT

Energy Technology Data Exchange (ETDEWEB)

Berry, JB

2005-05-06

Oak Ridge National Laboratory (ORNL) researches and develops distributed generation technology for the Department of Energy, Energy Efficiency and Renewable Energy Distributed Energy Program. This report describes installation and operation of one such distributed generation system, a United Technology Corporation fuel cell located at the National Transportation Research Center in Knoxville, Tennessee. Data collected from June 2003 to June of 2004, provides valuable insight regarding fuel cell-grid compatibility and the cost-benefit of the fuel cell operation. The NTRC fuel cell included a high-heat recovery option so that use of thermal energy improves project economics and improves system efficiency to 59% year round. During the year the fuel cell supplied a total of 834MWh to the NTRC and provided 300MBtu of hot water. Installation of the NTRC fuel cell was funded by the Distributed Energy Program with partial funding from the Department of Defense's Climate Change Fuel Cell Buy Down Program, administered by the National Energy Technology Laboratory. On-going operational expenses are funded by ORNL's utility budget and are paid from operational cost savings. Technical information and the benefit-cost of the fuel cell are both evaluated in this report and sister reports.

Developing Government Renewable Energy Projects

Energy Technology Data Exchange (ETDEWEB)

Kurt S. Myers; Thomas L. Baldwin; Jason W. Bush; Jake P. Gentle

2012-07-01

The US Army Corps of Engineers has retained Idaho National Laboratory (INL) to conduct a study of past INL experiences and complete a report that identifies the processes that are needed for the development of renewable energy projects on government properties. The INL has always maintained expertise in power systems and applied engineering and INL’s renewable energy experiences date back to the 1980’s when our engineers began performing US Air Force wind energy feasibility studies and development projects. Over the last 20+ years of working with Department of Defense and other government agencies to study, design, and build government renewable projects, INL has experienced the do’s and don’ts for being successful with a project. These compiled guidelines for government renewable energy projects could include wind, hydro, geothermal, solar, biomass, or a variety of hybrid systems; however, for the purpose of narrowing the focus of this report, wind projects are the main topic discussed throughout this report. It is our thought that a lot of what is discussed could be applied, possibly with some modifications, to other areas of renewable energy. It is also important to note that individual projects (regardless the type) vary to some degree depending on location, size, and need but in general these concepts and directions can be carried over to the majority of government renewable energy projects. This report focuses on the initial development that needs to occur for any project to be a successful government renewable energy project.

Investigation of Back-Projection Uncertainties with M6 Earthquakes

Science.gov (United States)

Fan, W.; Shearer, P. M.

2017-12-01

We investigate possible biasing effects of inaccurate timing corrections on teleseismic P-wave back-projection imaging of large earthquake ruptures. These errors occur because empirically-estimated time shifts based on aligning P-wave first arrivals are exact only at the hypocenter and provide approximate corrections for other parts of the rupture. Using the Japan subduction zone as a test region, we analyze 46 M6-7 earthquakes over a ten-year period, including many aftershocks of the 2011 M9 Tohoku earthquake, performing waveform cross-correlation of their initial P-wave arrivals to obtain hypocenter timing corrections to global seismic stations. We then compare back-projection images for each earthquake using its own timing corrections with those obtained using the time corrections for other earthquakes. This provides a measure of how well sub-events can be resolved with back-projection of a large rupture as a function of distance from the hypocenter. Our results show that back-projection is generally very robust and that sub-event location errors average about 20 km across the entire study region ( 700 km). The back-projection coherence loss and location errors do not noticeably converge to zero even when the event pairs are very close (<20 km). This indicates that most of the timing differences are due to 3D structure close to each of the hypocenter regions, which limits the effectiveness of attempts to refine back-projection images using aftershock calibration, at least in this region.

Appraising manufacturing location

NARCIS (Netherlands)

Steenhuis, H.J.; de Bruijn, E.J.

2002-01-01

International location of manufacturing activities is an issue for managers of manufacturing companies as well as public policy makers. For managers, the issue is relevant because international locations offer opportunities for lowering costs due to productivity improvements. For governments the

Generation of realistic scene using illuminant estimation and mixed chromatic adaptation

Science.gov (United States)

Kim, Jae-Chul; Hong, Sang-Gi; Kim, Dong-Ho; Park, Jong-Hyun

2003-12-01

The algorithm of combining a real image with a virtual model was proposed to increase the reality of synthesized images. Currently, synthesizing a real image with a virtual model facilitated the surface reflection model and various geometric techniques. In the current methods, the characteristics of various illuminants in the real image are not sufficiently considered. In addition, despite the chromatic adaptation plays a vital role for accommodating different illuminants in the two media viewing conditions, it is not taken into account in the existing methods. Thus, it is hardly to get high-quality synthesized images. In this paper, we proposed the two-phase image synthesis algorithm. First, the surface reflectance of the maximum high-light region (MHR) was estimated using the three eigenvectors obtained from the principal component analysis (PCA) applied to the surface reflectances of 1269 Munsell samples. The combined spectral value, i.e., the product of surface reflectance and the spectral power distributions (SPDs) of an illuminant, of MHR was then estimated using the three eigenvectors obtained from PCA applied to the products of surface reflectances of Munsell 1269 samples and the SPDs of four CIE Standard Illuminants (A, C, D50, D65). By dividing the average combined spectral values of MHR by the average surface reflectances of MHR, we could estimate the illuminant of a real image. Second, the mixed chromatic adaptation (S-LMS) using an estimated and an external illuminants was applied to the virtual-model image. For evaluating the proposed algorithm, experiments with synthetic and real scenes were performed. It was shown that the proposed method was effective in synthesizing the real and the virtual scenes under various illuminants.

76 FR 67178 - Wells Hydroelectric Project; Notice of Availability of the Final Environmental Impact Statement...

Science.gov (United States)

2011-10-31

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 2149-152] Wells Hydroelectric Project; Notice of Availability of the Final Environmental Impact Statement for the Wells... application for license for the Wells Hydroelectric Project (FERC No. 2149), located on the Columbia River in...

Prioritization of forest restoration projects: Tradeoffs between wildfire protection, ecological restoration and economic objectives

Science.gov (United States)

Kevin C. Vogler; Alan A. Ager; Michelle A. Day; Michael Jennings; John D. Bailey

2015-01-01

The implementation of US federal forest restoration programs on national forests is a complex process that requires balancing diverse socioecological goals with project economics. Despite both the large geographic scope and substantial investments in restoration projects, a quantitative decision support framework to locate optimal project areas and examine...

77 FR 7143 - Grand Coulee Project Hydroelectric Authority; Notice of Preliminary Permit Application Accepted...

Science.gov (United States)

2012-02-10

... Project Hydroelectric Authority; Notice of Preliminary Permit Application Accepted for Filing and Soliciting Comments and Motions To Intervene On January 13, 2012, the Grand Coulee Project Hydroelectric... study the feasibility of the P.E. 46A Wasteway Hydroelectric Project, to be located on the P.E. 46A...

Locating Microseism Sources Using Spurious Arrivals in Intercontinental Noise Correlations

Science.gov (United States)

Retailleau, Lise; Boué, Pierre; Stehly, Laurent; Campillo, Michel

2017-10-01

The accuracy of Green's functions retrieved from seismic noise correlations in the microseism frequency band is limited by the uneven distribution of microseism sources at the surface of the Earth. As a result, correlation functions are often biased as compared to the expected Green's functions, and they can include spurious arrivals. These spurious arrivals are seismic arrivals that are visible on the correlation and do not belong to the theoretical impulse response. In this article, we propose to use Rayleigh wave spurious arrivals detected on correlation functions computed between European and United States seismic stations to locate microseism sources in the Atlantic Ocean. We perform a slant stack on a time distance gather of correlations obtained from an array of stations that comprises a regional deployment and a distant station. The arrival times and the apparent slowness of the spurious arrivals lead to the location of their source, which is obtained through a grid search procedure. We discuss improvements in the location through this methodology as compared to classical back projection of microseism energy. This method is interesting because it only requires an array and a distant station on each side of an ocean, conditions that can be met relatively easily.

Green facility location

NARCIS (Netherlands)

Velázquez Martínez, J.C.; Fransoo, J.C.; Bouchery, Y.; Corbett, C.J.; Fransoo, J.C.; Tan, T.

2017-01-01

Transportation is one of the main contributing factors of global carbon emissions, and thus, when dealing with facility location models in a distribution context, transportation emissions may be substantially higher than the emissions due to production or storage. Because facility location models

Residential Location, Job Location, and Wages: Theory and Empirics

DEFF Research Database (Denmark)

Vejlin, Rune Majlund

-to-job transition without changing workplace location. However, workers making a job-to-job transition which makes the workplace location closer to the residence experiences a wage drop. Furthermore, low wage workers and workers with high transportation costs are more likely to make job-to-job transitions, but also......I develop a stylized partial on-the-job equilibrium search model which incorporate a spatial dimension. Workers reside on a circle and can move at a cost. Each point on the circle has a wage distribution. Implications about wages and job mobility are drawn from the model and tested on Danish...... matched employer-employee data. The model predictions hold true. I find that workers working farther away from their residence earn higher wages. When a worker is making a job-to-job transition where he changes workplace location he experiences a higher wage change than a worker making a job...

A Multi-Criteria Approach to Dry Port Location in Developing Economies with Application to Vietnam

Directory of Open Access Journals (Sweden)

Lam Canh Nguyen

2016-03-01

Full Text Available This paper presents a conceptual framework for the inclusion of multiple criteria in the evaluation of dry port location in developing countries from a multiple stakeholder perspective. We present the framework in four steps. The first step encompasses preliminary research to filter the alternative locations for dry port development. In the second step, the stakeholders are clustered in three groups: dry port users, dry port service providers and the wider community. Then, we present the sub-criteria related to dry port location including the associated measuring methods. The third step includes an explanation on the methods used for weighing these criteria and sub-criteria. A multi-criteria analysis is carried out in the final step. We apply the methodological framework to Vietnam. The location of a new dry port project in Vinh Phuc province will be evaluated against two existing inland clearance depots (ICD in Lao Cai and Phu Tho province.

EV car sharing/rental pilot project in Kyoto : an outline of the project

Energy Technology Data Exchange (ETDEWEB)

Kitamura, R. [Kyoto Univ., (Japan). Dept. of Civil Engineering Systems; Masunaga, K. [Japan Electric Vehicle Association, Minato, Tokyo (Japan)

2000-07-01

This paper presented a demonstration project in the City of Kyoto, Japan, which is aimed at determining if a Public Car System is an economically viable option for the twenty first century. The Kyoto electric vehicle (EV) car sharing project comprises advanced systems for EV reservation, check-out and return, and fleet operation and management. The most unique feature of this project is that it utilizes the ever expanding Internet and advanced mobile phones with Internet capabilities. Initially, 35 two-seater EVs will be shared by employees and visitors for business-related trips on weekdays and by tourists on weekends. The car sharing will be only short-term for only a single trip. The EV can be checked out and returned to any service depot located at railroad stations, major business centers and tourist attractions for user convenience. The ultimate goal of the project is to promote energy and resource conservation while providing adequate levels of mobility for people. Converting existing fleets to EVs which produce no exhaust gases is considered to be a viable solution to the problem of air pollution caused by traffic jams. tabs., figs.

The Wiluna Uranium Project, Western Australia: Bringing a new project to the market

International Nuclear Information System (INIS)

Guthrie, V.

2014-01-01

The Wiluna Uranium Project is the first uranium mine in Western Australia to receive Government environmental approval since government policy was changed in 2008 to allow uranium mining in Western Australia. Located 960 km northeast of Perth in remote central Western Australia, the Wiluna Project comprises 76.5 million pounds U_3O_8 [~29,000 tU] in six shallow, calcrete-hosted carnotite uranium deposits. Mining is planned at a rate of 1.3 million tonnes annually to produce 2 million pounds U_3O_8 [~770 tU] production using an alkali leach process. The Project requires initial capital investment of AUD$315M and has an operating cost of US$29-31 per pound [~75-~80 USD/kgU]. During the four years it has taken to gain environmental approval, Toro also progressed technical studies to validate the economic and technical viability of the Project. These included the initial Preliminary Feasibility (PFS) to define the processing train; mining optimisation studies, a Resource Evaluation Pit (REP) and a commercial scale Pilot Plant to verify the mining and processing technologies; and finally, Phase 1 of the Definitive Feasibility Study (DFS) which focussed on the processing plant design. (author)

The GPS Laser Retroreflector Array Project

Science.gov (United States)

Merkowitz, Stephen M.

2012-01-01

Systematic co-location in space through the precision orbit determination of GPS satellites via satellite laser ranging will contribute significantly towards improving the accuracy and stability of the international terrestrial reference frame. NASA recently formed the GPS Laser Retroreflector Array Project to develop and deliver retroreflectors for integration on the next generation of GPS satellites. These retroreflectors will be an important contributor to achieving a global accuracy of 1.0 mm and 0.1 mm/year stability in the international terrestrial reference frame. We report here the current status of the GPS Laser Retroreflector Array Project.

Description of Project Sapphire. Revision 1

International Nuclear Information System (INIS)

Taylor, R.G.

1995-01-01

The mission of Project Sapphire was to repackage approximately 600 kg of highly enriched uranium (HEU) in the Republic of Kazakhstan into internationally acceptable shipping packages and transport the material to a storage location in the United States. There were four material types to be repackaged: metal; oxide; uranium/beryllium (U/Be) alloy; and residues from U/Be alloy production. Seven major steps described in this report were necessary for successful execution of the project: planning and training; readiness assessment; deployment; set up; process; take down; and transport. Nuclear criticality safety especially affected several of these steps

MAPPING ALPINE VEGETATION LOCATION PROPERTIES BY DENSE MATCHING

Directory of Open Access Journals (Sweden)

R. Niederheiser

2016-06-01

Full Text Available Highly accurate 3D micro topographic mapping in mountain research demands for light equipment and low cost solutions. Recent developments in structure from motion and dense matching techniques provide promising tools for such applications. In the following, the feasibility of terrestrial photogrammetry for mapping topographic location properties of sparsely vegetated areas in selected European mountain regions is investigated. Changes in species composition at alpine vegetation locations are indicators of climate change consequences, such as the pronounced rise of average temperatures in mountains compared to the global average. Better understanding of climate change effects on plants demand for investigations on a micro-topographic scale. We use professional and consumer grade digital single-lens reflex cameras mapping 288 plots each 3 x 3 m on 18 summits in the Alps and Mediterranean Mountains within the GLORIA (GLobal Observation Research Initiative in Alpine environments network. Image matching tests result in accuracies that are in the order of millimetres in the XY-plane and below 0.5 mm in Z-direction at the second image pyramid level. Reconstructing vegetation proves to be a challenge due to its fine and small structured architecture and its permanent movement by wind during image acquisition, which is omnipresent on mountain summits. The produced 3D point clouds are gridded to 6 mm resolution from which topographic parameters such as slope, aspect and roughness are derived. At a later project stage these parameters will be statistically linked to botanical reference data in order to conclude on relations between specific location properties and species compositions.

Location condition of nuclear power generation at a viewpoint of location area

International Nuclear Information System (INIS)

Kawase, Kazuharu

1999-01-01

In the thirty years memorial meeting of the National Nuclear Power Generation located Commune Conference (NNGC) held in October, 1998, an extremely important fact was clarified, relation deeply to main aim of NNGC that permanent development was not promised at the location area even if a nuclear power plant was constructed there. Therefore, it is required that Japan government receives operation of three laws on electric source development as soon as possible, establishes a basic target on permanent area promotion in the nuclear power generation located commune, realizes some examples on development of the commune together with nuclear power generation and intends to promoted its location. (G.K.)

Gene Locater

DEFF Research Database (Denmark)

Anwar, Muhammad Zohaib; Sehar, Anoosha; Rehman, Inayat-Ur

2012-01-01

software's for calculating recombination frequency is mostly limited to the range and flexibility of this type of analysis. GENE LOCATER is a fully customizable program for calculating recombination frequency, written in JAVA. Through an easy-to-use interface, GENE LOCATOR allows users a high degree...... of flexibility in calculating genetic linkage and displaying linkage group. Among other features, this software enables user to identify linkage groups with output visualized graphically. The program calculates interference and coefficient of coincidence with elevated accuracy in sample datasets. AVAILABILITY...

Coupled CFD - system-code simulation of a gas cooled reactor

International Nuclear Information System (INIS)

Yan, Yizhou; Rizwan-uddin

2011-01-01

A generic coupled CFD - system-code thermal hydraulic simulation approach was developed based on FLUENT and RELAP-3D, and applied to LWRs. The flexibility of the coupling methodology enables its application to advanced nuclear energy systems. Gas Turbine - Modular Helium Reactor (GT-MHR) is a Gen IV reactor design which can benefit from this innovative coupled simulation approach. Mixing in the lower plenum of the GT-MHR is investigated here using the CFD - system-code coupled simulation tool. Results of coupled simulations are presented and discussed. The potential of the coupled CFD - system-code approach for next generation of nuclear power plants is demonstrated. (author)

Research on an estimation method of DOA for wireless location based on TD-SCDMA

Science.gov (United States)

Zhang, Yi; Luo, Yuan; Cheng, Shi-xin

2004-03-01

To meet the urgent need of personal communication and hign-speed data services,the standardization and products development for International Mobile Telecommunication-2000 (IMT-2000) have become a hot point in wordwide. The wireless location for mobile terminals has been an important research project. Unlike GPS which is located by 24 artificial satellities, it is based on the base-station of wireless cell network, and the research and development of it are correlative with IMT-2000. While the standard for the third generation mobile telecommunication (3G)-TD-SCDMA, which is proposed by China and the intellective property right of which is possessed by Chinese, is adopted by ITU-T at the first time, the research for wireless location based on TD-SCDMA has theoretic meaning, applied value and marketable foreground. First,the basic principle and method for wireless location, i.e. Direction of Angle(DOA), Time of Arrival(TOA) or Time Difference of Arrival(TDOA), hybridized location(TOA/DOA,TDOA/DOA,TDOA/DOA),etc. is introduced in the paper. So the research of DOA is very important in wireless location. Next, Main estimation methods of DOA for wireless location, i.e. ESPRIT, MUSIC, WSF, Min-norm, etc. are researched in the paper. In the end, the performances of DOA estimation for wireless location based on mobile telecommunication network are analyzed by the research of theory and simulation experiment and the contrast algorithms between and Cramer-Rao Bound. Its research results aren't only propitious to the choice of algorithms for wireless location, but also to the realization of new service of wireless location .

Reevaluating split-fovea processing in word recognition: hemispheric dominance, retinal location, and the word-nonword effect.

Science.gov (United States)

Jordan, Timothy R; Paterson, Kevin B; Kurtev, Stoyan

2009-03-01

Many studies have claimed that hemispheric projections are split precisely at the foveal midline and so hemispheric asymmetry affects word recognition right up to the point of fixation. To investigate this claim, four-letter words and nonwords were presented to the left or right of fixation, either close to fixation in foveal vision or farther from fixation in extrafoveal vision. Presentation accuracy was controlled using an eyetracker linked to a fixation-contingent display. Words presented foveally produced identical performance on each side of fixation, but words presented extrafoveally showed a clear left-hemisphere (LH) advantage. Nonwords produced no evidence of hemispheric asymmetry in any location. Foveal stimuli also produced an identical word-nonword effect on each side of fixation, whereas extrafoveal stimuli produced a word-nonword effect only for LH (not right-hemisphere) displays. These findings indicate that functional unilateral projections to contralateral hemispheres exist in extrafoveal locations but provide no evidence of a functional division in hemispheric processing at fixation.

78 FR 35630 - Martin Dam Hydroelectric Project; Notice of Availability of the Draft Environmental Impact...

Science.gov (United States)

2013-06-13

... Hydroelectric Project; Notice of Availability of the Draft Environmental Impact Statement for the Martin Dam Hydroelectric Project and Intention To Hold Public Meetings In accordance with the National Environmental Policy... the Martin Dam Hydroelectric Project (FERC No. 349), located on the Tallapoosa River in Tallapoosa...

76 FR 75542 - Porcupine Dam Hydropower Project; Notice of Preliminary Permit Application Accepted for Filing...

Science.gov (United States)

2011-12-02

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 14290-000] Porcupine Dam Hydropower Project; Notice of Preliminary Permit Application Accepted for Filing and Soliciting Comments...), proposing to study the feasibility of the Porcupine Dam Hydropower Project to be located on the East Fork of...

A real-time stack radioactivity monitoring system and dose projection program

Energy Technology Data Exchange (ETDEWEB)

Hull, A.P.; Michael, P.A. [Brookhaven National Laboratory, Upton, NY (United States); Bernstein, H.J. [Bernstein & Sons, Bellport, NY (United States)

1995-02-01

At Brookhaven National Laboratory, a commercial Low- and High-Range Air Effluent Monitor has become operational at the 60 Mw (t) High Flux Beam Reactor. Its output data is combined with that from ground-level and elevated meteorological sensors to provide a real-time projection of the down-wind dose rates from noble gases and radioiodines released from the HFBR`s 100 m stack. The output of the monitor, and the meteorological sensors and the dose projections can be viewed at emergency response terminals located in the Reactor Control Room, its Technical Support Center and at the laboratory`s separately located Meteorological Station and Monitoring and Assessment Center.

RESERCH STUDIES ON THE LOCATION OF A WAVE ENERGY POWER PLANT WITHIN CONSTANTA AREA

Directory of Open Access Journals (Sweden)

SAMOILESCU Gheorghe

2015-05-01

Full Text Available This paper is based on a research project on the development and installation of the first hydropneumatic plant in the Black Sea. It shows the location and its particularities, existing and previous hydrometeorological conditions, required work, plant qualities and standards to be met. The wave characteristics calculation and the hydrotechnic studies were presented: articulated concrete blocks demolition of the existing breakwater; dredging for the foundation of the plant; accomplish the foundation of the plant; installation of the plant; testing; consolidation and assuring protection of the breakwater; consolidation and assuring protection of the plant. Environmental protection measures are an important part of any research project of this type.

Water desalination as a possible opportunity for the GT- and H2-MHR

International Nuclear Information System (INIS)

Bogart, S. Locke; Schultz, Ken

2004-01-01

There is growing concern that many areas of the world are suffering ongoing and increasing water shortages. Much of this concern is manifested in the United Nation's World Water Assessment Programme, the results of which were published in the spring of 2003. Other researchers have corroborated the findings of this work. However, while the UN has characterized water availability as a 'crisis', this view would seem to be excessive. Nevertheless, many parts of the world, particularly in developing nations inclusive of the middle east, are experiencing severe water stress and some of these have embarked on large-scale seawater desalination projects. The current work explores, in a preliminary way, the application of high temperature helium cooled reactors in either an electricity or a hydrogen production mode for desalination. Three desalination technologies are discussed: reverse osmosis (RO) and thermal processes using either Multi-stage flash distillation (MSF) or Multi-effect distillation (MED). For the latter, it is found that the waste heat rejected from a high temperature reactor comes in power levels and temperatures reasonably well suited for desalination. An economic comparison was made using the best available data and scaling to compare the processes. What was found that reverse osmosis and thermal distillation possess comparable costs within the error bars of the analysis but that the former generally resulted in slightly lower costs. Thus the choice between them can be made with other criteria such as feed salinity and product quality. It was also found that desalinated water co-produced with either electricity (RO and MED) or hydrogen (MED) are expected to cost about the same. Since hydrogen and desalinated water can be produced off the grid, this co-production architecture appears attractive for the early deployment of high temperature helium cooled reactors. (authors)

High-resolution fault image from accurate locations and focal mechanisms of the 2008 swarm earthquakes in West Bohemia, Czech Republic

Czech Academy of Sciences Publication Activity Database

Vavryčuk, Václav; Bouchaala, Fateh; Fischer, Tomáš

2013-01-01

Roč. 590, April (2013), s. 189-195 ISSN 0040-1951 R&D Projects: GA ČR(CZ) GAP210/12/1491; GA MŠk LM2010008 EU Projects: European Commission(XE) 230669 - AIM Institutional support: RVO:67985530 Keywords : earth quake location * failure criterion * fault friction * focal mechanism * tectonic stress Subject RIV: DC - Siesmology, Volcanology, Earth Structure Impact factor: 2.866, year: 2013

Organization of Valence-Encoding and Projection-Defined Neurons in the Basolateral Amygdala

Directory of Open Access Journals (Sweden)

Anna Beyeler

2018-01-01

Full Text Available The basolateral amygdala (BLA mediates associative learning for both fear and reward. Accumulating evidence supports the notion that different BLA projections distinctly alter motivated behavior, including projections to the nucleus accumbens (NAc, medial aspect of the central amygdala (CeM, and ventral hippocampus (vHPC. Although there is consensus regarding the existence of distinct subsets of BLA neurons encoding positive or negative valence, controversy remains regarding the anatomical arrangement of these populations. First, we map the location of more than 1,000 neurons distributed across the BLA and recorded during a Pavlovian discrimination task. Next, we determine the location of projection-defined neurons labeled with retrograde tracers and use CLARITY to reveal the axonal path in 3-dimensional space. Finally, we examine the local influence of each projection-defined populations within the BLA. Understanding the functional and topographical organization of circuits underlying valence assignment could reveal fundamental principles about emotional processing.

Brugervenligt design: Design af applikation med fokus på usability og lokationsbaseret marketing: Usability Design: App-design with a focus on usability and Location Based Advertising

OpenAIRE

Pape, Nicklas Skov; Kofoed, Rune Weise; Jørgensen, Rasmus Christian

2014-01-01

The present project is based on an assumed demand for less visual pollution in the public domain, which is facilitated by alternative design and the use of location based technology, rather than radical legislation in the form of prohibitions or restrictions. Through the use of innovative techniques of creative concept development and iterative prototyping, the goal of this project is to design a prototype of a user friendly smartphone application on the basis of location-based and targeted m...

Project Mapping to Build Capacity and Demonstrate Impact in the Earth Sciences

Science.gov (United States)

Hemmings, S. N.; Searby, N. D.; Murphy, K. J.; Mataya, C. J.; Crepps, G.; Clayton, A.; Stevens, C. L.

2017-12-01

Diverse organizations are increasingly using project mapping to communicate location-based information about their activities. NASA's Earth Science Division (ESD), through the Earth Science Data Systems and Applied Sciences' Capacity Building Program (CBP), has created a geographic information system of all ESD projects to support internal program management for the agency. The CBP's NASA DEVELOP program has built an interactive mapping tool to support capacity building for the program's varied constituents. This presentation will explore the types of programmatic opportunities provided by a geographic approach to management, communication, and strategic planning. We will also discuss the various external benefits that mapping supports and that build capacity in the Earth sciences. These include activities such as project matching (location-focused synergies), portfolio planning, inter- and intra-organizational collaboration, science diplomacy, and basic impact analysis.

Text extraction method for historical Tibetan document images based on block projections

Science.gov (United States)

Duan, Li-juan; Zhang, Xi-qun; Ma, Long-long; Wu, Jian

2017-11-01

Text extraction is an important initial step in digitizing the historical documents. In this paper, we present a text extraction method for historical Tibetan document images based on block projections. The task of text extraction is considered as text area detection and location problem. The images are divided equally into blocks and the blocks are filtered by the information of the categories of connected components and corner point density. By analyzing the filtered blocks' projections, the approximate text areas can be located, and the text regions are extracted. Experiments on the dataset of historical Tibetan documents demonstrate the effectiveness of the proposed method.

Building a Uranium Heap Leach Project

International Nuclear Information System (INIS)

Schnell, Henry

2014-01-01

Despite all these we have seen many HL successes and many interesting projects coming down the pipe. • Previous experience in Uranium with previous ROM projects in France (Bessines, Langone), Niger (Somair), Canada (Agnew Lake) and other locations had provided some basic background. • Heap leach based on copper experience with crushed ore has operated for many years in Brazil (Caetite). • Many gold operations for many decades in all climates and continents. • Copper at +20% of production, many in Chile, but also now in many other countries. • Uranium with agglomerated crushed ores is now becoming more prominent – Somair, Imouraren, Trekkopje. • Work also ongoing for Ranger, Rossing, and in consideration for other projects. • Other notable work in Nickel, and multi-metal such as Talvivaara

Trojan Decommissioning Project Cost Performance

International Nuclear Information System (INIS)

Michael B. Lackey

2000-01-01

The Trojan nuclear plant (Trojan) was an 1160-MW(electric) four-loop pressurized water reactor located in Rainier, Oregon. The plant was permanently shut down in 1993 after ∼17 yr of commercial operation. The early plant closure was an economic decision. The key factors in the closure analysis were escalation of inspection and repair costs associated with steam generator tube cracking and the projected availability of inexpensive replacement power in the Pacific Northwest region of the United States. Since the plant closure, Portland General Electric (PGE) has been actively engaged in decommissioning. The Trojan Decommissioning Project currently has a forecast at completion of $429.7 million (all costs are in millions of 1997 dollars, unless otherwise noted). The cost performance of the Trojan Decommissioning Project to date is addressed, as well as the tools that are in place to provide cost control through completion of decommissioning

Alignment tools used to locate a wire and a laser beam in the VISA undulator project

Energy Technology Data Exchange (ETDEWEB)

Wolf, Z.; Ruland, R.; Dix, B.; Arnett, D. [Stanford Linear Accelerator Center, Menlo Park, CA (United States)

1999-07-01

Within the framework of the LCLS (Linac Coherent Light Source), a small experiment VISA (Visual to Infrared SASE (Self Amplified Stimulated Emission) Amplifier) is being performed at Brookhaven National Laboratory. VISA consists of four wiggler segments, each 0.99 m long. The four segments are required to be aligned to the beam axis with an rms error less than 50 {mu}m. This very demanding alignment is carried out in two steps. First the segments are fiducialized using a pulsed wire system. Then the wiggler segments are placed along a reference laser beam which coincides with the electron beam axis. In the wiggler segment fiducialization, a wire is stretched through a wiggler segment and a current pulse is sent down the wire. The deflection of the wire is monitored. The deflection gives information about the electron beam trajectory. The wire is moved until its x position, the coordinate without wire sag, is on the ideal beam trajectory. (The y position is obtained by rotating the wiggler 90 deg C.) Once the wire is on the ideal beam trajectory, the wire's location is measured relative to tooling balls on the wiggler segment. To locate the wire, a device was constructed which measures the wire position relative to tooling balls on the device. The device is called the wire finder. It will be discussed in this paper. To place the magnets along the reference laser beam, the position of the laser beam must be determined. A device which can locate the laser beam relative to tooling balls was constructed and is also discussed in this paper. This device is called the laser finder. With a total alignment error budget less than 50 {mu}m, both the fiducialization and magnet placement must be performed with errors much smaller than 50 {mu}m. It is desired to keep the errors from the wire finder and laser finder at the few {mu}m level. (authors)

Spatial patterns of carbon, biodiversity, deforestation threat, and REDD+ projects in Indonesia.

Science.gov (United States)

Murray, Josil P; Grenyer, Richard; Wunder, Sven; Raes, Niels; Jones, Julia P G

2015-10-01

There are concerns that Reduced Emissions from Deforestation and forest Degradation (REDD+) may fail to deliver potential biodiversity cobenefits if it is focused on high carbon areas. We explored the spatial overlaps between carbon stocks, biodiversity, projected deforestation threats, and the location of REDD+ projects in Indonesia, a tropical country at the forefront of REDD+ development. For biodiversity, we assembled data on the distribution of terrestrial vertebrates (ranges of amphibians, mammals, birds, reptiles) and plants (species distribution models for 8 families). We then investigated congruence between different measures of biodiversity richness and carbon stocks at the national and subnational scales. Finally, we mapped active REDD+ projects and investigated the carbon density and potential biodiversity richness and modeled deforestation pressures within these forests relative to protected areas and unprotected forests. There was little internal overlap among the different hotspots (richest 10% of cells) of species richness. There was also no consistent spatial congruence between carbon stocks and the biodiversity measures: a weak negative correlation at the national scale masked highly variable and nonlinear relationships island by island. Current REDD+ projects were preferentially located in areas with higher total species richness and threatened species richness but lower carbon densities than protected areas and unprotected forests. Although a quarter of the total area of these REDD+ projects is under relatively high deforestation pressure, the majority of the REDD+ area is not. In Indonesia at least, first-generation REDD+ projects are located where they are likely to deliver biodiversity benefits. However, if REDD+ is to deliver additional gains for climate and biodiversity, projects will need to focus on forests with the highest threat to deforestation, which will have cost implications for future REDD+ implementation. © 2015 The Authors

NASA SBIR abstracts of 1991 phase 1 projects

Science.gov (United States)

Schwenk, F. Carl; Gilman, J. A.; Paige, J. B.

1992-01-01

The objectives of 301 projects placed under contract by the Small Business Innovation Research (SBIR) program of the National Aeronautics and Space Administration (NASA) are described. These projects were selected competitively from among proposals submitted to NASA in response to the 1991 SBIR Program Solicitation. The basic document consists of edited, non-proprietary abstracts of the winning proposals submitted by small businesses. The abstracts are presented under the 15 technical topics within which Phase 1 proposals were solicited. Each project was assigned a sequential identifying number from 001 to 301, in order of its appearance in the body of the report. Appendixes to provide additional information about the SBIR program and permit cross-reference of the 1991 Phase 1 projects by company name, location by state, principal investigator, NASA Field Center responsible for management of each project, and NASA contract number are included.

NASA SBIR abstracts of 1992, phase 1 projects

Science.gov (United States)

Schwenk, F. C.; Gilman, J. A.; Paige, J. B.; Sacknoff, S. M.

1993-01-01

The objectives of 346 projects placed under contract by the Small Business Innovation Research (SBIR) program of the National Aeronautics and Space Administration (NASA) are described. These projects were selected competitively from among proposals submitted to NASA in response to the 1992 SBIR Program Solicitation. The basic document consists of edited, non-proprietary abstracts of the winning proposals submitted by small businesses. The abstracts are presented under the 15 technical topics within which Phase 1 proposals were solicited. Each project was assigned a sequential identifying number from 001 to 346, in order of its appearance in the body of the report. Appendixes to provide additional information about the SBIR program and permit cross-reference of the 1992 Phase 1 projects by company name, location by state, principal investigator, NASA Field Center responsible for management of each project, and NASA contract number are included.

76 FR 6153 - Supplemental Environmental Impact Statement for the Proposed Campo Regional Landfill Project on...

Science.gov (United States)

2011-02-03

... for the Proposed Campo Regional Landfill Project on the Campo Indian Reservation, San Diego County, CA... proposed Campo Regional Landfill Project (Proposed Action) to be located on the Campo Indian Reservation... Landfill Project (Proposed Action). There is no Federal action of amended lease and amended sublease...

Project Portfolio Risk Identification and Analysis, Considering Project Risk Interactions and Using Bayesian Networks

Directory of Open Access Journals (Sweden)

Foroogh Ghasemi

2018-05-01

Full Text Available An organization’s strategic objectives are accomplished through portfolios. However, the materialization of portfolio risks may affect a portfolio’s sustainable success and the achievement of those objectives. Moreover, project interdependencies and cause–effect relationships between risks create complexity for portfolio risk analysis. This paper presents a model using Bayesian network (BN methodology for modeling and analyzing portfolio risks. To develop this model, first, portfolio-level risks and risks caused by project interdependencies are identified. Then, based on their cause–effect relationships all portfolio risks are organized in a BN. Conditional probability distributions for this network are specified and the Bayesian networks method is used to estimate the probability of portfolio risk. This model was applied to a portfolio of a construction company located in Iran and proved effective in analyzing portfolio risk probability. Furthermore, the model provided valuable information for selecting a portfolio’s projects and making strategic decisions.

Project management plan for Project W-178, 219-S secondary containment

International Nuclear Information System (INIS)

Buckles, D.I.

1995-01-01

This Project Management Plan (PMP) establishes the organizational responsibilities, control systems, and procedures for managing the execution of project activities for Project W-178, the 219-S Secondary Containment Upgrade. The scope of this project will provide the 219-S Facility with secondary containment for all tanks and piping systems. Tank 103 will be replaced with a new tank which will be designated as Tank 104. Corrosion protection shall be installed as required. The cells shall be cleaned and the surface repaired as required. The 219-S Waste Handling Facility (219-S Facility), located in the 200 West Area, was constructed in 1951 to support the 222-S Laboratory Facility. The 219-S Facility has three tanks, TK-101, TK-102, and TK-103, which receive and neutralize low level radioactive wastes from the 222-S Laboratory. For purposes of the laboratory, the different low level waste streams have been designated as high activity and intermediate activity. The 219-S Facility accumulates and treats the liquid waste prior to transferring it to SY Tank Farm in the 200-W Area. Transfers are normally made by pipeline from the 219-S Facility to the 241-SY Tank Farm. Presently transfers are being made by tanker truck to the 200-E Area Tank Farms due to the diversion box catch tank which has been removed from service

Final Report of the Final Meeting of Project Coordinators

International Nuclear Information System (INIS)

Cordero Calderon, Carlos F.

1996-06-01

The Costa Rican Electricity Institute has always been worried of the verification of the good state of the works and thus to guarantee their operation. For that reason, it has established different sorts of auscultation of the Arenal's Dam. Some investigations have been done to find new methods to improve and to eliminate risks in different works or projects. The Arenal's Dam is one of the greatest engineering works in Costa Rica, it has the Arenal, Corobici and Sandillal Hydroelectric Plants. Furthermore, the irrigation system in the Tempisque River Valley, in the Guanacaste province. One special characteristic of the Site of the Dam, is the near location of the Arenal Volcano, in full activity and located at 6 Km. from the dam. This report has two goals, one is the traditional permanent measurements report for the project, and the other, is to present it as a final work of the Project Arcal XVIII, to the International Atomic Energy Agency. This report analyses the geo-hydraulic, structural and topographic auscultation, as well as the activities accomplished during the ARCAL XVIII /8/018, Application of Tracer Techniques for Leakage in Dams and Damming Project, based on information gathered through the geo-chemical auscultation, until June 1996. (author).30 ills., 80 charts, 35 tabs

Industrie 4.0: Network Formation on a Distributed Manufacturing Project

Directory of Open Access Journals (Sweden)

Luiz Fernando Cardoso dos Santos Durão

2017-09-01

Full Text Available The integration of modern internet technology and manufacturing technology, which has been denominated Industrie 4.0, allows for distributed manufacturing using additive manufacturing on a global scale with the integration of machines and processes. However, distributed manufacturing poses many challenges for standardization, quality control and management of information in different manufacturing sites. This article aims to investigate the formation of networks in distributed manufacturing projects, identifying the stake-holders and types of connections throughout the project. The methodological approach used was longitudinal action research for a distributed manufacturing project with a focus on flexible manufacturing. The central plant was located in Germany and the supplier located in Brazil, with a partnership between the Polytechnic School of the University of São Paulo and the Technical University of Darmstadt, Germany. The design and engineering that spawned the product model was developed in Germany, while the additive manufacturing site, the structure, and machinery was developed in Brazil, forming a development and distributed manufacturing network. The results showed how organized the communication and knowledge sharing was among those involved in the distributed manufacturing project, as well as an understanding of what kind of knowledge is shared among those involved.

Niland Test Facility Startup Evaluation Task Force

Energy Technology Data Exchange (ETDEWEB)

1976-01-01

The following team reports are included: systems, operation, control, and safety; instrumentation; brine chemistry and materials evaluation; reservoir assessment; environment; and contingency analysis. (MHR)

Onderzoek Location Based Marketing: Mobile = location = effect

NARCIS (Netherlands)

Gisbergen, M.S. van; Huhn, A.E.; Khan, V.J.; Ketelaar, P.E.

2011-01-01

Onderzoekers van de NHTV (Internationaa Hoger Onderwijs Breda, Radboud Universiteit, DVJ Insights en Popai Benelux lieten consumenten in een virtuele supermarkt advertenties via de smartphone ontvangen wanneer men langs het geadverteerde product liep. De uitkomsten laten zien dat 'location based

77 FR 4290 - Conway Ranch Hydropower Project; Notice of Preliminary Permit Application Accepted for Filing and...

Science.gov (United States)

2012-01-27

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 13089-002] Conway Ranch Hydropower Project; Notice of Preliminary Permit Application Accepted for Filing and Soliciting Comments... study the feasibility of the Conway Ranch Hydropower Project to be located on Virginia Creek, near the...

75 FR 65615 - Conditional Commitment for a Federal Loan Guarantee for Project Financing for Southwest Intertie...

Science.gov (United States)

2010-10-26

... DEPARTMENT OF ENERGY Conditional Commitment for a Federal Loan Guarantee for Project Financing for... based on the analysis in the Final Environmental Impact Statement for Project Financing for Southwest... support of debt financing for transmission infrastructure investment projects located in the United States...

Costly location in Hotelling duopoly

NARCIS (Netherlands)

Hinloopen, J.; Martin, S.

We introduce a cost of location into Hotelling's (1929) spatial duopoly model. We derive the general conditions on the cost-of-location function under which a pure strategy price-location Nash equilibrium exists. With linear transportation cost and a suitably specified cost of location that rises

Costly location in Hotelling duopoly

NARCIS (Netherlands)

Hinloopen, J.; Martin, S.

2013-01-01

We introduce a cost of location into Hotelling’s (1929) spatial duopoly. We derive the general conditions on the cost-of-location function under which a pure strategy price-location Nash equilibrium exists. With linear transportation cost and a suitably specified cost of location that rises toward

Effects of capture-related injury on postcapture movement of white-tailed deer.

Science.gov (United States)

Dechen Quinn, Amy C; Williams, David M; Porter, William F; Fitzgerald, Scott D; Hynes, Kevin

2014-04-01

Capture-related injuries or deaths of wildlife study subjects pose concerns to researchers, from considerations for animal welfare to inflated project costs and biased data. Capture myopathy (CM) is an injury that can affect an animal's survival ≤ 30 days postrelease, but is often difficult to detect without close monitoring and immediate necropsy. We evaluated the influence of capture and handling on postcapture movement in an attempt to characterize movement rates of animals suffering from CM. We captured and global positioning system-collared 95 white-tailed deer (Odocoileus virginianus) in central and northern New York during 2006-2008. Six juveniles died within 30 days postrelease, and necropsy reports indicated that two suffered CM (2%). We compared postcapture movement rates for juveniles that survived >30 days with those that died ≤ 30 days postcapture. Survivor movement rates (43.74 m/hr, SD = 3.53, n = 28) were significantly higher than rates for deer that died within 30 days (17.70 m/hr, SD = 1.57, n = 6) (Pheart rate, respiration rate) during handling between survivors and juveniles that died within 30 days postcapture but observed that survivors were in better body condition at capture. These results suggest that deer likely to die within the 30-day CM window can be identified soon after capture, provided that intensive movement data are collected. Further, even if necropsy reports are unavailable, these animals should be censored from analysis because their behavior is not representative of movements of surviving animals.

Accuracy of the master-event and double-difference locations: synthetic tests and application to seismicity in West Bohemia, Czech Republic

Czech Academy of Sciences Publication Activity Database

Bouchaala, Fateh; Vavryčuk, Václav; Fischer, Tomáš

2013-01-01

Roč. 17, č. 3 (2013), s. 841-859 ISSN 1383-4649 R&D Projects: GA AV ČR IAA300120905; GA ČR(CZ) GAP210/12/1491; GA MŠk LM2010008 EU Projects: European Commission(XE) 230669 - AIM Institutional support: RVO:67985530 Keywords : earthquakes * earthquake swarm * faults * locations * seismicity Subject RIV: DC - Siesmology, Volcanology, Earth Structure Impact factor: 1.386, year: 2013

Renal artery origins: best angiographic projection angles.

Science.gov (United States)

Verschuyl, E J; Kaatee, R; Beek, F J; Patel, N H; Fontaine, A B; Daly, C P; Coldwell, D M; Bush, W H; Mali, W P

1997-10-01

To determine the best projection angles for imaging the renal artery origins in profile. A mathematical model of the anatomy at the renal artery origins in the transverse plane was used to analyze the amount of aortic lumen that projects over the renal artery origins at various projection angles. Computed tomographic (CT) angiographic data about the location of 400 renal artery origins in 200 patients were statistically analyzed. In patients with an abdominal aortic diameter no larger than 3.0 cm, approximately 0.5 mm of the proximal part of the renal artery and origin may be hidden from view if there is a projection error of +/-10 degrees from the ideal image. A combination of anteroposterior and 20 degrees and 40 degrees left anterior oblique projections resulted in a 92% yield of images that adequately profiled the renal artery origins. Right anterior oblique projections resulted in the least useful images. An error in projection angle of +/-10 degrees is acceptable for angiographic imaging of the renal artery origins. Patients sex, site of interest (left or right artery), and local diameter of the abdominal aorta are important factors to consider.

On English Locative Subjects

Directory of Open Access Journals (Sweden)

Gabriela Brůhová

2017-07-01

Full Text Available The paper analyses English sentences with thematic locative subjects. These subjects were detected as translation counterparts of Czech sentenceinitial locative adverbials realized by prepositional phrases with the prepositions do (into, na (on, v/ve (in, z/ze (from complemented by a noun. In the corresponding English structure, the initial scene-setting adverbial is reflected in the thematic subject, which results in the locative semantics of the subject. The sentences are analysed from syntactic, semantic and FSP aspects. From the syntactic point of view, we found five syntactic patterns of the English sentences with a locative subject (SV, SVA, SVO, SVpassA and SVCs that correspond to Czech sentences with initial locative adverbials. On the FSP level the paper studies the potential of the sentences to implement the Presentation or Quality Scale. Since it is the “semantic content of the verb that actuates the presentation semantics of the sentence” (Duškova, 2015a: 260, major attention is paid to the syntactic-semantic structure of the verb. The analysis of the semantics of the English sentences results in the identification of two semantic classes of verbs which co-occur with the English locative subject.

Development of satellite position location system for aircraft and boat distress beacons

Science.gov (United States)

Kahle, D. R.

1982-01-01

An international satellite system for the detection and location of distress beacons carried on aircraft and vessels is in its technical checkout phase. User demonstration and evaluation (D&E) will start in early 1983 and continue for two years. The D&E phase and a subsequent transition period will form the basis for improved search and rescue operations for the 1980's and beyond. The system, called COSPAS/SARSAT, has international participation involving the U.S., Canada, and France as SARSAT members and joint participation with the Soviet Union's COSPAS Project. Norway and the U.K. have recently joined as investigators. Average position location error of the satellite aided processing is expected to be from 10-20KM for the existing 121.5/243 MHz distress beacons and from 2-5KM for experimental beacons transmitting in the 406 MHz band.

Location performance objectives for the NNWSI area-to-location screening activity

Energy Technology Data Exchange (ETDEWEB)

Sinnock, S.; Fernandez, J.A.

1984-01-01

Fifty-four objectives were identified to guide the screening of the Nevada Research and Development Area of the Nevada Test Site for relatively favorable locations for the disposal of nuclear waste in a mined geologic repository. The objectives were organized as a hierarchy composed of 4 upper-level, 12 middle-level, and 38 lower-level objectives. The four upper-level objectives account for broad national goals to contain and isolate nuclear waste in an environmentally sound and economically acceptable manner. The middle-level objectives correspond to topical categories that logically relate the upper-level objectives to site-specific concerns such as seismicity, sensitive species, and flooding hazards (represented by the lower-level objectives). The relative merits of alternative locations were compared by an application of decision analysis based on standard utility theory. The relative favorabilities of pertinent physical conditions at each alternative location were weighted in relation to the importance of objectives, and summed to produce maps indicating the most and the least favorable locations. Descriptions of the objectives were organized by the hierarchical format; they detail the applicability of each objective to geologic repository siting, previously published siting criteria corresponding to each objective, and the rationale for the weight assigned to each objective, and the pertinent attributes for evaluating locations with respect to each objective. 51 references, 47 figures, 4 tables.

Location performance objectives for the NNWSI area-to-location screening activity

International Nuclear Information System (INIS)

Sinnock, S.; Fernandez, J.A.

1984-01-01

Fifty-four objectives were identified to guide the screening of the Nevada Research and Development Area of the Nevada Test Site for relatively favorable locations for the disposal of nuclear waste in a mined geologic repository. The objectives were organized as a hierarchy composed of 4 upper-level, 12 middle-level, and 38 lower-level objectives. The four upper-level objectives account for broad national goals to contain and isolate nuclear waste in an environmentally sound and economically acceptable manner. The middle-level objectives correspond to topical categories that logically relate the upper-level objectives to site-specific concerns such as seismicity, sensitive species, and flooding hazards (represented by the lower-level objectives). The relative merits of alternative locations were compared by an application of decision analysis based on standard utility theory. The relative favorabilities of pertinent physical conditions at each alternative location were weighted in relation to the importance of objectives, and summed to produce maps indicating the most and the least favorable locations. Descriptions of the objectives were organized by the hierarchical format; they detail the applicability of each objective to geologic repository siting, previously published siting criteria corresponding to each objective, and the rationale for the weight assigned to each objective, and the pertinent attributes for evaluating locations with respect to each objective. 51 references, 47 figures, 4 tables

Privacy-Preserving Location-Based Services

Science.gov (United States)

Chow, Chi Yin

2010-01-01

Location-based services (LBS for short) providers require users' current locations to answer their location-based queries, e.g., range and nearest-neighbor queries. Revealing personal location information to potentially untrusted service providers could create privacy risks for users. To this end, our objective is to design a privacy-preserving…

Yeager Airport Hydrogen Vehicle Test Project

Energy Technology Data Exchange (ETDEWEB)

Davis, Williams [West Virginia University Research Corporation, Morgantown, WV (United States)

2015-10-01

The scope of this project was changed during the course of the project. Phase I of the project was designed to have the National Alternative Fuels Training Consortium (NAFTC), together with its partners, manage the Hydrogen Vehicle Test Project at the Yeager Airport in conjunction with the Central West Virginia Regional Airport Authority (CWVRAA) in coordination with the United States Department of Energy National Energy Technology Laboratory (U.S. DOE NETL). This program would allow testing and evaluation of the use of hydrogen vehicles in the state of West Virginia utilizing the hydrogen fueling station at Yeager Airport. The NAFTC and CWVRAA to raise awareness and foster a greater understanding of hydrogen fuel and hydrogen-powered vehicles through a targeted utilization and outreach and education effort. After initial implementation of the project, the project added, determine the source(s) of supply for hydrogen powered vehicles that could be used for the testing. After completion of this, testing was begun at Yeager Airport. During the course of the project, the station at Yeager Airport was closed and moved to Morgantown and the West Virginia University Research Corporation. The vehicles were then moved to Morgantown and a vehicle owned by the CWVRAA was purchased to complete the project at the new location. Because of a number of issues detailed in the report for DE-FE0002994 and in this report, this project did not get to evaluate the effectiveness of the vehicles as planned.

Cost estimation using ministerial regulation of public work no. 11/2013 in construction projects

Science.gov (United States)

Arumsari, Putri; Juliastuti; Khalifah Al'farisi, Muhammad

2017-12-01

One of the first tasks in starting a construction project is to estimate the total cost of building a project. In Indonesia there are several standards that are used to calculate the cost estimation of a project. One of the standards used in based on the Ministerial Regulation of Public Work No. 11/2013. However in a construction project, contractor often has their own cost estimation based on their own calculation. This research aimed to compare the construction project total cost using calculation based on the Ministerial Regulation of Public Work No. 11/2013 against the contractor’s calculation. Two projects were used as case study to compare the results. The projects were a 4 storey building located in Pantai Indah Kapuk area (West Jakarta) and a warehouse located in Sentul (West Java) which was built by 2 different contractors. The cost estimation from both contractors’ calculation were compared to the one based on the Ministerial Regulation of Public Work No. 11/2013. It is found that there were differences between the two calculation around 1.80 % - 3.03% in total cost, in which the cost estimation based on Ministerial Regulation was higher than the contractors’ calculations.

Pad A treatability study long-range project plan

International Nuclear Information System (INIS)

Mousseau, J.D.

1991-06-01

This plan addresses the work to be accomplished by the Pad A Treatability Study Project. The purpose of this project is to investigate potential treatment and separation technologies, identify the best technologies, and to demonstrate by both lab- and pilot-scale demonstration, the most applicable remedial technologies for treating plutonium-contaminated salts at the Pad A site located at the Subsurface Disposal Area (SDA) at the Radioactive Waste Management Complex (RWMC) a the Idaho National Engineering Laboratory (INEL). The conduct of this project will be supported by other DOE laboratories, universities, and private industries, who will provide support for near-term demonstrations of treatment and separation technologies. The purpose of this long-range planning document is to present the detailed plan for the implementation of the Pad A Treatability Study Project

Merging digital and urban play spaces: Learning by playing and creating location-based games in secondary education

NARCIS (Netherlands)

Huizenga, J.; Admiraal, W.; ten Dam, G.; Gouscos, D.; Meimaris, M.

2011-01-01

With handhelds, it is possible to mix virtual with real-world data (i.e. locations and contexts) connecting virtual worlds to real life. Handheld games can be used to engage students with learning in their (school) environment. In a project called 'Games Atelier' innovative pedagogy was developed

BAO Plate Archive Project

Science.gov (United States)

Mickaelian, A. M.; Gigoyan, K. S.; Gyulzadyan, M. V.; Paronyan, G. M.; Abrahamyan, H. V.; Andreasyan, H. R.; Azatyan, N. M.; Kostandyan, G. R.; Samsonyan, A. L.; Mikayelyan, G. A.; Farmanyan, S. V.; Harutyunyan, V. L.

2017-12-01

We present the Byurakan Astrophysical Observatory (BAO) Plate Archive Project that is aimed at digitization, extraction and analysis of archival data and building an electronic database and interactive sky map. BAO Plate Archive consists of 37,500 photographic plates and films, obtained with 2.6m telescope, 1m and 0.5m Schmidt telescopes and other smaller ones during 1947-1991. The famous Markarian Survey (or the First Byurakan Survey, FBS) 2000 plates were digitized in 2002-2005 and the Digitized FBS (DFBS, www.aras.am/Dfbs/dfbs.html) was created. New science projects have been conducted based on this low-dispersion spectroscopic material. Several other smaller digitization projects have been carried out as well, such as part of Second Byurakan Survey (SBS) plates, photographic chain plates in Coma, where the blazar ON 231 is located and 2.6m film spectra of FBS Blue Stellar Objects. However, most of the plates and films are not digitized. In 2015, we have started a project on the whole BAO Plate Archive digitization, creation of electronic database and its scientific usage. Armenian Virtual Observatory (ArVO, www.aras.am/Arvo/arvo.htm) database will accommodate all new data. The project runs in collaboration with the Armenian Institute of Informatics and Automation Problems (IIAP) and will continues during 4 years in 2015-2018. The final result will be an Electronic Database and online Interactive Sky map to be used for further research projects. ArVO will provide all standards and tools for efficient usage of the scientific output and its integration in international databases.

Hydrogen fueling demonstration projects using compact PSA purification

International Nuclear Information System (INIS)

Ng, E.; Smith, T.

2004-01-01

'Full text:' Hydrogen fueling demonstration projects are critical to the success of hydrogen as an automotive fuel by building public awareness and demonstrating the technology required to produce, store, and dispense hydrogen. Over 75 of these demonstration projects have been undertaken or are in the planning stages world-wide, sponsored by both the public and private sectors. Each of these projects represents a unique combination of sponsors, participants, geographic location, and hydrogen production pathway. QuestAir Technologies Inc., as the industry leader in compact pressure swing adsorption equipment for purifying hydrogen, has participated in four hydrogen fueling demonstration projects with a variety of partners and in North America and Japan. QuestAir's experiences as a participant in the planning, construction, and commissioning of these demonstration projects will be presented in this paper. The unique challenges of each project and the critical success factors that must to be considered for successful deployment of high-profile, international, and multi-vendor collaborations will also be discussed. The paper will also provide insights on the requirements for hydrogen fueling demonstration projects in the future. (author)

Charting a Path to Location Intelligence for STD Control.

Science.gov (United States)

Gerber, Todd M; Du, Ping; Armstrong-Brown, Janelle; McNutt, Louise-Anne; Coles, F Bruce

2009-01-01

This article describes the New York State Department of Health's GeoDatabase project, which developed new methods and techniques for designing and building a geocoding and mapping data repository for sexually transmitted disease (STD) control. The GeoDatabase development was supported through the Centers for Disease Control and Prevention's Outcome Assessment through Systems of Integrated Surveillance workgroup. The design and operation of the GeoDatabase relied upon commercial-off-the-shelf tools that other public health programs may also use for disease-control systems. This article provides a blueprint of the structure and software used to build the GeoDatabase and integrate location data from multiple data sources into the everyday activities of STD control programs.

User's operating procedures. Volume 2: Scout project financial analysis program

Science.gov (United States)

Harris, C. G.; Haris, D. K.

1985-01-01

A review is presented of the user's operating procedures for the Scout Project Automatic Data system, called SPADS. SPADS is the result of the past seven years of software development on a Prime mini-computer located at the Scout Project Office, NASA Langley Research Center, Hampton, Virginia. SPADS was developed as a single entry, multiple cross-reference data management and information retrieval system for the automation of Project office tasks, including engineering, financial, managerial, and clerical support. This volume, two (2) of three (3), provides the instructions to operate the Scout Project Financial Analysis program in data retrieval and file maintenance via the user friendly menu drivers.

Field evaluation of the effectiveness of three industrial by-products as organic amendments for phytostabilization of a Pb/Zn mine tailings.

Science.gov (United States)

Yang, Shengxiang; Cao, Jianbing; Li, Fengmei; Peng, Xizhu; Peng, Qingjing; Yang, Zhihui; Chai, Liyuan

2016-01-01

Although the potential of industrial by-products as organic amendments for phytostabilization has long been recognized, most of the previous studies addressing this issue have been laboratory-based. In this study, a field trial was conducted to evaluate the effectiveness of three industrial by-products [sweet sorghum vinasse (SSV), medicinal herb residues (MHR) and spent mushroom compost (SMC)] as organic amendments for phytostabilization of abandoned Pb/Zn mine tailings. Our results showed the following: (i) when compared to the control tailings, the mean concentrations of diethylene-triamine-pentaacetic acid (DTPA)-extractable Cd, Cu, Pb and Zn in SSV, MHR and SMC treatments decreased by 20.8-28.0%, 41.6-49.1%, 17.7-22.7% and 9.5-14.7%, respectively; (ii) the mean values of organic C, ammonium-N and available P in SSV, MHR and SMC treatments increased by 1.7-2.8, 10.8-14.9 and 3.9-5.1 times as compared with the mine tailings; and (iii) the addition of SSV, MHR and SMC significantly enhanced soil respiration and microbial biomass being 1.5-1.8 and 1.3-1.6 fold higher than those in the control tailings. There were no significant differences in soil biochemical properties among the plots amended with these by-products, suggesting that they were almost equally effective in improving the biochemical conditions of the tailings. In addition, the application of these amendments promoted seed germination, seedling growth, and consequently increased the vegetation cover and its biomass. Moreover, concentrations of Cd, Cu, Pb and Zn in above-ground parts of the plants were below the toxicity limit levels for animals. The results obtained in this field study confirmed that the three organic-rich industrial by-products could be used as amendments for phytostabilization of some types of mine tailings.

Interactive virtual reality Wii in geriatric day hospital: a study to assess its feasibility, acceptability and efficacy.

Science.gov (United States)

Chan, Tuen Ching; Chan, Fei; Shea, Yat Fung; Lin, Oi Yee; Luk, James Ka Hay; Chan, Felix Hon Wai

2012-10-01

Rehabilitation using interactive virtual reality Wii (Wii-IVR) was shown to be feasible in patients with different medical problems, but there was no study examining its use in a geriatric day hospital (GDH). The aim of the present study was to test the feasibility, acceptability and efficacy of Wii-IVR in GDH. It was a clinical trial with matched historic controls. Patients of a GDH were recruited to participate in Wii-IVR by playing "Wii Fit". Participants used a Wii controller to carry out movements involved in an arm ergometer. Each participant received eight sessions of Wii-IVR in addition to conventional GDH rehabilitation. Feasibility was assessed by the total time receiving Wii-IVR, the percentage of maximal heart rate reserve (%MHR) and Borg perceived exertion scale (BS) after participating in Wii-IVR. %MHR and BS were compared with those after carrying out an arm ergometer for the same duration. Acceptability was assessed by an interviewer-administered questionnaire. Efficacy was assessed by comparing improvements in Functional Independence Measure (FIM) between participants and matched historic controls, who received conventional GDH rehabilitations only. A total of 30 patients completed the study. Participants completed a total of 1941 min of event-free Wii-IVR. The mean %MHR was 15.9% ± 9.9% and the mean BS was 7.9 ± 2.3. There was no significant difference in %MHR and BS between participating in Wii-IVR and arm ergometer. Most participants found Wii-IVR similar to the arm ergometer, and would like to continue Wii-IVR if they had Wii at home. Improvements in FIM of participants were significantly more than that of historic controls. Wii-IVR in GDH was feasible and most participants accepted it. Participants had more improvements in FIM. © 2012 Japan Geriatrics Society.

The gas turbine modular helium reactor. An international project to develop a safe, efficient, flexible product

International Nuclear Information System (INIS)

Silberstein, A.J.

1998-01-01

As originally scheduled, the Conceptual Design Report of the 600 Mwt Gas Turbine Modular Helium Reactor has been issued in October 1997 by OKBM in Nizhny Novgorod, a keystone Russian Engineering Institute fully involved in the realization of this International Project. The plutonium burning, graphite moderated helium cooled reactor design results from the work done on the basis of General Atomics original concept combined with the goal of optimizing safety power and efficiency with multi contributions in specific fields from the Russian organizations: MINATOM, OKBM, VNIINM, Lutch, Kurchatov Institute, Seversk Chemical Combinat, Fuji Electric and FRAMATOME. The objective to concentrate the engineering work in Russia has met a full success due principally to the quality and experience of the people, to the international support and to the progressive integration of new techniques of communication, of project management culture and utilization of modern computerized design tools and methods. To day the best international standard of quality is reached in the engineering activity and expected to stay at this level for future developments, when including experimental facilities operation and components manufacturing activities, thanks to the diffusion of the common culture, acquired by the main actors during the conceptual design phase, that will be exported to Russian third parties. At this stage we are planning to start design verification and sensitive components and systems qualification, with the same original actors. The European Commission has already shown some significant interest through the MICHELANGELO Initiative in supporting the HTR concepts assessment and identification of the R and D needs. We are looking forward for further support from the International Community and particularly from European Institutions in the frame of the 5th PCRD to pursue the GT MHR R and D program. Furthermore we are looking for funding the building of a prototype in Russia

Leak Signature Space: An Original Representation for Robust Leak Location in Water Distribution Networks

Directory of Open Access Journals (Sweden)

Myrna V. Casillas

2015-03-01

Full Text Available In this paper, an original model-based scheme for leak location using pressure sensors in water distribution networks is introduced. The proposed approach is based on a new representation called the Leak Signature Space (LSS that associates a specific signature to each leak location being minimally affected by leak magnitude. The LSS considers a linear model approximation of the relation between pressure residuals and leaks that is projected onto a selected hyperplane. This new approach allows to infer the location of a given leak by comparing the position of its signature with other leak signatures. Moreover, two ways of improving the method’s robustness are proposed. First, by associating a domain of influence to each signature and second, through a time horizon analysis. The efficiency of the method is highlighted by means of a real network using several scenarios involving different number of sensors and considering the presence of noise in the measurements.

On the Design of Energy-Efficient Location Tracking Mechanism in Location-Aware Computing

Directory of Open Access Journals (Sweden)

MoonBae Song

2005-01-01

Full Text Available The battery, in contrast to other hardware, is not governed by Moore's Law. In location-aware computing, power is a very limited resource. As a consequence, recently, a number of promising techniques in various layers have been proposed to reduce the energy consumption. The paper considers the problem of minimizing the energy used to track the location of mobile user over a wireless link in mobile computing. Energy-efficient location update protocol can be done by reducing the number of location update messages as possible and switching off as long as possible. This can be achieved by the concept of mobility-awareness we propose. For this purpose, this paper proposes a novel mobility model, called state-based mobility model (SMM to provide more generalized framework for both describing the mobility and updating location information of complexly moving objects. We also introduce the state-based location update protocol (SLUP based on this mobility model. An extensive experiment on various synthetic datasets shows that the proposed method improves the energy efficiency by 2 ∼ 3 times with the additional 10% of imprecision cost.

Fermeuse wind power project Newfoundland : noise and visual analysis studies

Energy Technology Data Exchange (ETDEWEB)

Henn, P.; Turgeon, J.; Heraud, P.; Belanger, S.; Dakousian, S.; Lamontagne, C.; Soares, D. [Helimax Energy Inc., Montreal, PQ (Canada); Basil, C.; Boulianne, S.; Salacup, S.; Thompson, C. [Skypower, Toronto, ON (Canada)

2008-03-15

This paper discussed the noise and visual analyses used to assess the potential impacts of a wind energy project on the east coast of the Avalon Peninsula near St. John's, Newfoundland. The proposed farm will be located approximately 1 km away from the town of Fermeuse, and will have an installed capacity of 27 MW from 9 turbines. The paper provided details of the consultation process conducted to determine acceptable distance and site locations for the wind turbines from the community. Stakeholders were identified during meetings, events, and discussions with local authorities. Consultations were also held with government agencies and municipal councils. A baseline acoustic environment study was conducted, and details of anticipated environmental impacts during the project's construction, operation, and decommissioning phases were presented. The visual analysis study was divided into the following landscape units: town, shoreline, forest, open land and lacustrine landscapes. The effect of the turbines on the landscapes were assessed from different viewpoints using visual simulation programs. The study showed that the visual effects of the project are not considered as significant because of the low number of turbines. It was concluded that the effect of construction on ambient noise levels is of low concern as all permanent dwellings are located at least 1 km away from the turbines. 2 refs., 4 tabs., 4 figs.

75 FR 61479 - Kendall Head Tidal Energy Project; Notice of Preliminary Permit Application Accepted for Filing...

Science.gov (United States)

2010-10-05

... Tidal Energy Project; Notice of Preliminary Permit Application Accepted for Filing and Soliciting... Federal Power Act, proposing to study the feasibility of the Kendall Head Tidal Energy Project, located in.... The proposed project would consist of: (1) 4 OCGen\\TM\\ hydrokinetic tidal devices each consisting of...

Project Specific Quality Assurance Plan Project (QAPP) W-211 Initial Tank Retrieval Systems (ITRS)

International Nuclear Information System (INIS)

HALL, L.R.

2000-01-01

This Quality Assurance Program Plan (QAPP) provides information on how the Project Hanford Quality Assurance Program is implemented by CH2M HILL Hanford Group Inc (CHG) for managing the Initial Tank Retrieval Systems (ITRS), Project W-211. This QAPP is responsive to the CHG Quality Assurance Program Description (QAPD) (LMH-MP-599) which provides direction for compliance to 10 CFR 830 120, ''Nuclear Safety Management, Quality Assurance Requirements'', and DOE Order 5700 6C, ''Quality Assurance'' Project W-211 modifies existing facilities and provides systems for retrieval of radioactive wastes from selected double-shell tanks (DST). The contents of these tanks are a combination of supernatant liquids and settled solids. To retrieve waste from the tanks, it is first necessary to mix the liquid and solids prior to transferring the slurry to alternative storage or treatment facilities. The ITRS will provide systems to mobilize the settled solids and transfer the wastes out of the tanks. In so doing, ITRS provides feed for future processing plants, allows for consolidation of tank solids to manage space within existing DST storage capacity, and supports continued safe storage of tank waste. This project includes the design, procurement, construction, startup and turnover of these retrieval systems This QAPP identifies organizational structures and responsibilities. Implementing procedures used by CHG project management can be found in the CHG Quality Assurance Program (CHG QAP) Implementation Matrix located in HNF-IP-0842, Volume XI, Attachment Proposed verification and inspection activities for critical items within the scope of project W-211 are identified in Attachment 1 W-211. Project participants will identify the implementing procedures used by their organization within their QAF'Ps. This project specific QAPP is used to identify requirements in addition to the QAPD and provide, by reference, additional information to other project documents

Substation Location in Offshore Wind Farms - A Planar Multi-Facility Location-Routing Problem

OpenAIRE

Amland, Thomas

2014-01-01

In offshore wind farms, two important parts of the design are to determine locations for substations and a cabling layout that connects every turbine to a substation. These problems are interconnected, as the cable layout depends on the choice of location for the substation. In this thesis we investigate how to set the location of substations such that the total cable cost is minimized.

Location theory a unified approach

CERN Document Server

Nickel, Stefan

2006-01-01

Although modern location theory is now more than 90 years old, the focus of researchers in this area has been mainly problem oriented. However, a common theory, which keeps the essential characteristics of classical location models, is still missing.This monograph addresses this issue. A flexible location problem called the Ordered Median Problem (OMP) is introduced. For all three main subareas of location theory (continuous, network and discrete location) structural properties of the OMP are presented and solution approaches provided. Numerous illustrations and examples help the reader to bec

Geothermal resources in Oregon: site data base and development status

Energy Technology Data Exchange (ETDEWEB)

Justus, D.L.

1979-04-01

An inventory of resources based on available information is presented. Potential for utilization and the legal and institutional environment in which development is likely to occur were also considered. Sites selected for this investigation include the 13 identified KGRA's, one PGRA which was chosen because of substantial local interest expressed in favor of development, and one major geologic fault zone which shows indications of high potential. Each chapter represents a planning region and is introduced by a regional overview of the physical setting followed by a narrative summary statement of the specific resource location and characteristics, existing utilization and potential end-uses for future development. Detailed site information in the form of data sheets follows each narrative. (MHR)

Models of household location and urban amenities

DEFF Research Database (Denmark)

van Duijn, Mark; Möhlmann, Jan; Mulalic, Ismir

the drivers of economic prosperity and growth in cities. In this introductory section we discuss some evidence that motivates this idea. In ‘The Economy of Cities’ Jane Jacobs (1970) puts forward the thesis that human interaction is a crucial aspect of urban economies. Economists such as Lucas (1988) picked...... and although local labor markets may differ in many respects, it is generally the case that higher wages lower the demand for workers.1 However, if a city has good amenities it may continue to attract highly educated workers even when wages are not that high. This reasoning thus suggests an important......1.1 Skilled workers and regional development The research carried out in the HELP project concerns the importance of urban amenities for the location choices of highly educated workers. Why is this important? A general answer to this question is that such workers are generally regarded as being...

RFID Location Algorithm

Directory of Open Access Journals (Sweden)

Wang Zi Min

2016-01-01

Full Text Available With the development of social services, people’s living standards improve further requirements, there is an urgent need for a way to adapt to the complex situation of the new positioning technology. In recent years, RFID technology have a wide range of applications in all aspects of life and production, such as logistics tracking, car alarm, security and other items. The use of RFID technology to locate, it is a new direction in the eyes of the various research institutions and scholars. RFID positioning technology system stability, the error is small and low-cost advantages of its location algorithm is the focus of this study.This article analyzes the layers of RFID technology targeting methods and algorithms. First, RFID common several basic methods are introduced; Secondly, higher accuracy to political network location method; Finally, LANDMARC algorithm will be described. Through this it can be seen that advanced and efficient algorithms play an important role in increasing RFID positioning accuracy aspects.Finally, the algorithm of RFID location technology are summarized, pointing out the deficiencies in the algorithm, and put forward a follow-up study of the requirements, the vision of a better future RFID positioning technology.

Shippingport: Overall project progress

International Nuclear Information System (INIS)

Crimi, F.P.

1989-01-01

The Shippingport atomic power station (SAPS) consisted of the nuclear steam supply system and associated radioactive waste processing systems, which were owned by the US Department of Energy (DOE), and the balance of plant, owned by the Duquesne Light Company. The station is located at Shippingport, Pennsylvania, on 7 acres of land leased by DOE from Duquesne Light Company. The Shippingport Station Decommissioning Project (SSDP) is being performed under contract to the DOE by the General Electric Company (GE) and its preselected subcontractor, MK-Ferguson Company, as the decommissioning operations contractor (DOC). This paper describes the decommissioning work that has been accomplished since July 1988, and the project's cost and schedule status. As the first decommissioning of a commercial, full-scale nuclear power plant, the SSDP is expected to set the standards for the demolition of future nuclear power plants

Accessing 3D Location of Standing Pelvis: Relative Position of Sacral Plateau and Acetabular Cavities versus Pelvis

International Nuclear Information System (INIS)

Berthonnaud, E.; Hilmi, R.; Berthonnaud, E.; Berthonnaud, E.; Dimnet, J.

2012-01-01

The goal of this paper is to access to pelvis position and morphology in standing posture and to determine the relative locations of their articular surfaces. This is obtained from coupling bi planar radiography and bone modeling. The technique involves different successive steps. Punctual landmarks are first reconstructed, in space, from their projected images, identified on two orthogonal standing X-rays. Geometric models, of global pelvis and articular surfaces, are determined from punctual landmarks. The global pelvis is represented as a triangle of summits: the two femoral head centers and the sacral plateau center. The two acetabular cavities are modeled as hemispheres. The anterior sacral plateau edge is represented by an hemi-ellipsis. The modeled articular surfaces are projected on each X-ray. Their optimal location is obtained when the projected contours of their models best fit real outlines identified from landmark images. Linear and angular parameters characterizing the position of global pelvis and articular surfaces are calculated from the corresponding sets of axis. Relative positions of sacral plateau, and acetabular cavities, are then calculated. Two hundred standing pelvis, of subjects and scoliotic patients, have been studied. Examples are presented. They focus upon pelvis orientations, relative positions of articular surfaces, and pelvis asymmetries.

The Pen Branch Project: Restoration of a Forested Wetland in South Carolina

Science.gov (United States)

Randall K. Kolka; Eric A. Nelson; Ronald E. Bonar; Neil C. Dulohery; David Gartner

1998-01-01

The Pen Branch Project is a program to restore a forested riparian wetland that has been subject to thermal disturbance caused by nuclear reactor operations at the Department of Energy's (DOE) Savannah River Site (SRS), an 80,200-hectare nuclear facility located in South Carolina. Various levels of thermal discharges to streams located across the US. have occurred...

Process of optimization of retail trade spatial development with application of locational-alocational models

Directory of Open Access Journals (Sweden)

Kukrika Milan

2008-01-01

Full Text Available This article gives a simple and brief scope of structure and usage of location-allocation models in territory planning of retail network, trying to show the main shortage of some given models and the primary direction of their future improving. We give an inspection of theirs main usage and give an explanation of basic factors that models take in consideration during the process of demand allocation. Location-allocation models are an important segment of development of spatial retail network optimization process. Their future improvement is going towards their approximation and integration with spatial-interaction models. In this way, much better methodology of planning and directing spatial development of trade general. Methodology which we have used in this research paper is based on the literature and research projects in the area. Using this methodology in analyzing parts of Serbian territory through usage of location-allocation models, showed the need for creating special software for calculating matrix with recursions. Considering the fact that the integration of location-allocation models with GIS still didn't occur, all the results acquired during the calculation of methaformula has been brought into ArcGIS 9.2 software and presented as maps.

Financing wind projects

International Nuclear Information System (INIS)

Manson, J.

2006-01-01

This presentation reviewed some of the partnership opportunities available from GE Energy. GE Energy's ecomagination commitment has promised to double research investment, make customers true partners and reduce greenhouse gases (GHGs). GE Energy's renewable energy team provides a broad range of financial products, and has recently funded 30 wind farms and 2 large solar projects. The company has a diverse portfolio of technology providers and wind regimes, and is increasing their investment in technology. GE Energy recognizes that the wind industry is growing rapidly and has received increased regulatory support that is backed by strong policy and public support. It is expected that Canada will have 3006 wind projects either planned or under construction by 2007. According to GE Energy, successful wind financing is dependent on the location of the site and its wind resources, as well as on the wind developer's power sales agreement. The success of a wind project is also determined by clear financing goals. Site-specific data is needed to determine the quality of wind resource, and off-site data can also be used to provide validation. Proximity to load centres will help to minimize capital costs. Power sales agreements should be based on the project's realistic net capacity factor as well as on the cost of the turbines. The economics of many wind farms is driven by the size of the turbines used. Public consultations are also needed to ensure the success of wind power projects. It was concluded that a good partner will have staying power in the wind power industry, and will understand the time-lines and needs that are peculiar to wind energy developers. refs., tabs., figs

TWRS phase 1 infrastructure project (W-519) characterization

International Nuclear Information System (INIS)

Mitchell, C.J.

1998-01-01

In order to treat the mixed radioactive and hazardous waste stored in 177 underground tanks, the Tank Waste Remediation System (TWRS) program is developing a 'demonstration' site for treatment and immobilization of these wastes by a private contractor. Project W-519 is providing the infrastructure support to this site by developing the designs and emplacing required pipelines, roads, electrical, etc. In support of the TWRS Phase 1 Infrastructure Project (W-519) Characterization, Numatec Hanford Corporation (NHC) contracted with Waste Management Federal Services, Inc., Northwest Operations (WMNW) to investigate a number of locations in and just outside the 200 East Area eastern fenceline boundary. These areas consisted of known or suspected waste lines or waste sites that could potentially impact the construction and emplacement of the proposed facility improvements, including waterlines and roads. These sites were all located subsurface and sugaring would be required to obtain sample material from the desired depth. The soils would then be sampled and submitted to the laboratory for analysis of radioactivity

75 FR 9201 - Kilarc-Cow Creek Hydroelectric Project; Notice of Intention To Prepare an Environmental Impact...

Science.gov (United States)

2010-03-01

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 606-027-CA] Kilarc-Cow... of license for the Kilarc-Cow Creek Hydroelectric Project, FERC No. 606. The project contains two developments and is located on Old Cow Creek and South Cow Creek in Shasta County, northern California. In the...

78 FR 19330 - Supplemental Environmental Impact Statement for the Ross In-Situ Uranium Recovery Project in...

Science.gov (United States)

2013-03-29

... Ross In-Situ Uranium Recovery Project in Crook County, Wyoming AGENCY: Nuclear Regulatory Commission... Commission (NRC) for a new source materials license for the proposed Ross In-Situ Uranium Recovery (ISR) Project (Ross Project) proposed to be located in Crook County, Wyoming. The NRC is issuing for public...

Environmental Field Surveys, EMF Rapid Program, Engineering Project No.3

Energy Technology Data Exchange (ETDEWEB)

Enertech Consultants

1996-04-01

The EMF Research and Public Information Dissemination Program (RAPID) includes several engineering research in the area of exposure assessment and source characterization. RAPID engineering project No. 3: ''Environmental Field Surveys'' was performed to obtain information on the levels and characteristics of different environments, for which only limited data were available, especially in comparison to magnetic field data for the residential environment and for electric utility facilities, such as power lines and substations. This project was also to provide information on the contribution of various field sources in the surveyed environments. Magnetic field surveys were performed at four sites for each of five environments: schools, hospitals, office buildings, machine shops, and grocery stores. Of the twenty sites surveyed, 11 were located in the San Francisco Bay Area and 9 in Massachusetts. The surveys used a protocol based on magnetic field measurements and observation of activity patterns, designed to provide estimates of magnetic field exposure by type of people and by type of sources. The magnetic field surveys conducted by this project produced a large amount of data which will form a part of the EMF measurement database Field and exposure data were obtained separately for ''area exposure'' and ''at exposure points''. An exposure point is a location where persons engage in fixed, site specific activities near a local source that creates a significant increase in the area field. The area field is produced by ''area sources'', whose location and field distribution is in general not related to the location of the people in the area.

The COMPOSE Project

Science.gov (United States)

Balletta, P.; Biagini, M.; Gallinaro, G.; Vernucci, A.

2003-07-01

This paper provides an overview of the on-going project COMPOSE, an EC co-funded project aiming to define, specify and validate an innovative mobile-services scenario in support of travellers, and to demonstrate the effectiveness of the new proposed location-based value-added services. COMPOSE is supported by organisations belonging to numerous categories covering, as a whole, the entire value-chain of infomobility services provision to the final user. The project team comprises, in addition to the affiliations of the authors, also Teleatlas (NL), ARS T&TT (NL), Alcatel-Bell Space (B), Skysoft (P), Hitech Marketing (A) and MobileGis (IR). The paper describes the services that will be offered to users, encompassing both the pre-trip and the on-trip framework, presents the overall hybrid system architecture also including a via-satellite component based upon the Wideband-CDMA (W-CDMA) technique adopted in UMTS, discusses the access solutions envisaged for that component permitting multiple feeder-link stations to share the CDMA multiplex capacity by directly transmitting their codes to the satellite, and illustrates the results of some computer simulations intended to assess the performance of said access solutions, with regard to the effects of the inevitable up- link frequency errors and transponder non-linearity.

Location of colorectal cancer: colonoscopy versus surgery. Yield of colonoscopy in predicting actual location.

Science.gov (United States)

Blum-Guzman, Juan Pablo; Wanderley de Melo, Silvio

2017-07-01

 Recent studies suggest that differences in biological characteristics and risk factors across cancer site within the colon and rectum may translate to differences in survival. It can be challenging at times to determine the precise anatomical location of a lesion with a luminal view during colonoscopy. The aim of this study is to determine if there is a significant difference between the location of colorectal cancers described by gastroenterologists in colonoscopies and the actual anatomical location noted on operative and pathology reports after colon surgery.  A single-center retrospective analysis of colonoscopies of patient with reported colonic masses from January 2005 to April 2014 (n = 380) was carried. Assessed data included demography, operative and pathology reports. Findings were compared: between the location of colorectal cancers described by gastroenterologists in colonoscopies and the actual anatomical location noted on operative reports or pathology samples.  We identified 380 colonic masses, 158 were confirmed adenocarcinomas. Of these 123 underwent surgical resection, 27 had to be excluded since no specific location was reported on their operative or pathology report. An absolute difference between endoscopic and surgical location was found in 32 cases (33 %). Of these, 22 (23 %) differed by 1 colonic segment, 8 (8 %) differed by 2 colonic segments and 2 (2 %) differed by 3 colonic segments.  There is a significant difference between the location of colorectal cancers reported by gastroenterologists during endoscopy and the actual anatomical location noted on operative or pathology reports after colon surgery. Endoscopic tattooing should be used when faced with any luminal lesions of interest.

Re-evaluation Of The Shallow Seismicity On Mt Etna Applying Probabilistic Earthquake Location Algorithms.

Science.gov (United States)

Tuve, T.; Mostaccio, A.; Langer, H. K.; di Grazia, G.

2005-12-01

A recent research project carried out together with the Italian Civil Protection concerns the study of amplitude decay laws in various areas on the Italian territory, including Mt Etna. A particular feature of seismic activity is the presence of moderate magnitude earthquakes causing frequently considerable damage in the epicentre areas. These earthquakes are supposed to occur at rather shallow depth, no more than 5 km. Given the geological context, however, these shallow earthquakes would origin in rather weak sedimentary material. In this study we check the reliability of standard earthquake location, in particular with respect to the calculated focal depth, using standard location methods as well as more advanced approaches such as the NONLINLOC software proposed by Lomax et al. (2000) using it with its various options (i.e., Grid Search, Metropolis-Gibbs and Oct-Tree) and 3D velocity model (Cocina et al., 2005). All three options of NONLINLOC gave comparable results with respect to hypocenter locations and quality. Compared to standard locations we note a significant improve of location quality and, in particular a considerable difference of focal depths (in the order of 1.5 - 2 km). However, we cannot find a clear bias towards greater or lower depth. Further analyses concern the assessment of the stability of locations. For this purpose we carry out various Monte Carlo experiments perturbing travel time reading randomly. Further investigations are devoted to possible biases which may arise from the use of an unsuitable velocity model.

Geothermal progress monitor. Progress report No. 1

Energy Technology Data Exchange (ETDEWEB)

1979-12-01

Progress is reported on the following: electrical uses, direct-heat uses, drilling activities, leases, geothermal loan guarantee program, general activities, and legal, institutional, and regulatory activites. (MHR)

Third geopressured-geothermal energy conference.Vol 2

Energy Technology Data Exchange (ETDEWEB)

Meriwether, J.

1977-11-16

Twenty papers were included covering the Edna Delcambre Test Well, legal studies, environmental studies, economic studies, and resource utilization. Separate abstracts were prepared for each paper. (MHR)

Reviving large-scale projects

International Nuclear Information System (INIS)

Desiront, A.

2003-01-01

For the past decade, most large-scale hydro development projects in northern Quebec have been put on hold due to land disputes with First Nations. Hydroelectric projects have recently been revived following an agreement signed with Aboriginal communities in the province who recognized the need to find new sources of revenue for future generations. Many Cree are working on the project to harness the waters of the Eastmain River located in the middle of their territory. The work involves building an 890 foot long dam, 30 dikes enclosing a 603 square-km reservoir, a spillway, and a power house with 3 generating units with a total capacity of 480 MW of power for start-up in 2007. The project will require the use of 2,400 workers in total. The Cree Construction and Development Company is working on relations between Quebec's 14,000 Crees and the James Bay Energy Corporation, the subsidiary of Hydro-Quebec which is developing the project. Approximately 10 per cent of the $735-million project has been designated for the environmental component. Inspectors ensure that the project complies fully with environmental protection guidelines. Total development costs for Eastmain-1 are in the order of $2 billion of which $735 million will cover work on site and the remainder will cover generating units, transportation and financial charges. Under the treaty known as the Peace of the Braves, signed in February 2002, the Quebec government and Hydro-Quebec will pay the Cree $70 million annually for 50 years for the right to exploit hydro, mining and forest resources within their territory. The project comes at a time when electricity export volumes to the New England states are down due to growth in Quebec's domestic demand. Hydropower is a renewable and non-polluting source of energy that is one of the most acceptable forms of energy where the Kyoto Protocol is concerned. It was emphasized that large-scale hydro-electric projects are needed to provide sufficient energy to meet both

Space diffuses multiobjective analysis: A tool to locate lineal projects with a focus of environmental management

International Nuclear Information System (INIS)

Patricia Jaramillo A Liliana Vinasco T

2005-01-01

This paper presents a methodological proposal that is developed to identify corridors for lineal projects (highways, transmission lines, pipelines, etc), with environmental management criteria, when there is not complete information about the area of influence of the project, or some of the information is imprecise. Also a computational module is developed that allow the use of the methodological proposal. The proposal is based in the fuzzy multiobjective analysis concept, which takes elements of the diffuse logic and the traditional Multiobjective Analysis; the first one, it conserves its properties with imprecise information and of the second allows, the minimization of multiple objective correspond to the least environmental the physical, biological, cultural, economical and political dimensions of the environment uses the Geographic Information SIG this proposal is being constituted a complete tool for taking decisions in which space attributed is included. The FMA is a recent technique that is in development [S integration to GIS is stiller. The proposal is a contribution to the construction of a conceptual scheme for future applications in this aspects constitute a tool for the environmental planning which decreasing the risks, future cost analysis of natural resources and human group

The Influence of Emission Location on the Magnitude and Spatial Distribution of Aerosols' Climate Effects

Science.gov (United States)

Persad, G.; Caldeira, K.

2017-12-01

The global distribution of anthropogenic aerosol emissions has evolved continuously since the preindustrial era - from 20th century North American and Western European emissions hotspots to present-day South and East Asian ones. With this comes a relocation of the regional radiative, dynamical, and hydrological impacts of aerosol emissions, which may influence global climate differently depending on where they occur. A lack of understanding of this relationship between aerosol emissions' location and their global climate effects, however, obscures the potential influence that aerosols' evolving geographic distribution may have on global and regional climate change—a gap which we address in this work. Using a novel suite of experiments in the CESM CAM5 atmospheric general circulation model coupled to a slab ocean, we systematically test and analyze mechanisms behind the relative climate impact of identical black carbon and sulfate aerosol emissions located in each of 8 past, present, or projected future major emissions regions. Results indicate that historically high emissions regions, such as North America and Western Europe, produce a stronger cooling effect than current and projected future high emissions regions. Aerosol emissions located in Western Europe produce 3 times the global mean cooling (-0.34 °C) as those located in East Africa or India (-0.11 °C). The aerosols' in-situ radiative effects remain relatively confined near the emissions region, but large distal cooling results from remote feedback processes - such as ice albedo and cloud changes - that are excited more strongly by emissions from certain regions than others. Results suggest that aerosol emissions from different countries should not be considered equal in the context of climate mitigation accounting, and that the evolving geographic distribution of aerosol emissions may have a substantial impact on the magnitude and spatial distribution of global climate change.

A single geophone to locate seismic events on Mars

Science.gov (United States)

Roques, Aurélien; Berenguer, Jean-Luc; Bozdag, Ebru

2016-04-01

Knowing the structure of Mars is a key point in understanding the formation of Earth-like planets as plate tectonics and erosion have erased the original suface of the Earth formation. Installing a seismometer on Mars surface makes it possible to identify its structure. An important step in the identification of the structure of a planet is the epicenter's location of a seismic source, typically a meteoric impact or an earthquake. On Earth, the classical way of locating epicenters is triangulation, which requires at least 3 stations. The Mars InSight Project plans to set a single station with 3 components. We propose a software to locate seismic sources on Mars thanks to the 3-components simulated data of an earthquake given by Geoazur (Nice Sophia-Antipolis University, CNRS) researchers. Instrumental response of a sensor is crucial for data interpretation. We study the oscillations of geophone in several situations so as to awaken students to the meaning of damping in second order modeling. In physics, car shock absorbers are often used to illustrate the principle of damping but rarely in practical experiments. We propose the use of a simple seismometer (a string with a mass and a damper) that allows changing several parameters (inductive damping, temperature and pressure) so as to see the effects of these parameters on the impulse response and, in particular, on the damping coefficient. In a second step, we illustrate the effect of damping on a seismogram with the difficulty of identifying and interpreting the different phase arrival times with low damping.

OLBS: Offline location based services

OpenAIRE

Coelho, P; Ana Aguiar; João Correia Lopes

2011-01-01

Most existing location-based services rely on ubiquitous connectivity to deliver location-based contents to the users. However, connectivity is not available anywhere at anytime even in urban centres. Underground, indoors, remote areas, and foreign countries are examples situations where users commonly do not have guaranteed connectivity but could profit from location-based contents. In this work, we propose an open platform for publishing, distributing and maintaining location-based contents...

31 CFR 537.412 - Investments in entities involved in economic development projects in Burma.

Science.gov (United States)

2010-07-01

... economic development projects in Burma. 537.412 Section 537.412 Money and Finance: Treasury Regulations... economic development of resources located in Burma is prohibited by § 537.204 where the company's profits are predominantly derived from the company's economic development of resources located in Burma. (b...

LOCAT - A Data Retrieval Program.

Science.gov (United States)

1984-12-01

onoitode of scified location - P C RADIUS - maximum distance between specified location and C file locationsC . ’ CONNON /LOCN/ LOCLAT, LOCLNG, RADIUS...rrr’, ,r:.- r -’ - r- rJ Z. . . , . -.-. - - - - - - -- , -• .. . . FILMED 8-85 DTIC .-. ... , ,- . . . . ...: .--. :,.:. ..-..-- ,-, .-..-...

Economic analysis of radioactive waste storage and disposal projects

International Nuclear Information System (INIS)

Kleinen, P.J.; Starnes, R.B.

1995-01-01

Radioactive waste storage and disposal efforts present challenging issues for cost and economic analyses. In particular, legal requirements for states and compact areas to develop radioactive waste disposal sites, combined with closure of some sites, have placed urgency on planning, locating, and constructing storage and disposal sites. Cost analyses of potential projects are important to the decision processes. Principal objectives for cost analyses for projects are to identify all activities, covering the entire project life cycle, and to develop costs for those activities using methods that allow direct comparisons between competing project alternatives. For radioactive waste projects, long project lives ranging from tens of years to 100 or more years must be considered. Alternative, and competing, technologies, designs, and operating plans must be evaluated. Thorough base cost estimates must be made for all project phases: planning, development, licensing/permitting, construction, operations, and maintenance, closure, and post-closure/institutional care. Economic analysis procedures need to accommodate the specific features of each project alternative and facilitate cost comparisons between differing alternatives. Economic analysis assumptions must be developed to address the unusually long project lives involved in radioactive waste projects

NASA SBIR abstracts of 1990 phase 1 projects

Science.gov (United States)

Schwenk, F. C.; Gilman, J. A.; Paige, J. B.

1991-01-01

The research objectives of the 280 projects placed under contract in the National Aeronautics and Space Administration (NASA) 1990 Small Business Innovation Research (SBIR) Phase 1 program are described. The basic document consists of edited, non-proprietary abstracts of the winning proposals submitted by small businesses in response to NASA's 1990 SBIR Phase 1 Program Solicitation. The abstracts are presented under the 15 technical topics within which Phase 1 proposals were solicited. Each project was assigned a sequential identifying number from 001 to 280, in order of its appearance in the body of the report. The document also includes Appendixes to provide additional information about the SBIR program and permit cross-reference in the 1990 Phase 1 projects by company name, location by state, principal investigator, NASA field center responsible for management of each project, and NASA contract number.

Assessment of wind turbine wake-effects in the proposed "Markerwaard" wind/hydro project

NARCIS (Netherlands)

Vermeulen, P.E.J.; Builtjes, P.J.H.; Vijge, J.B.A.; Smet, L. de

1980-01-01

Figure I gives on overview of the location of the "Markerwaard" area within the "IJsselmeer" lake in the middle of the Netherlands. This area is the last part of the large reclamation project in the "IJsselmeer" lake. This project has resulted thus far in the realisation of four polders of roughly

Kootenai River Wildlife Habitat Enhancement Project : Long-term Bighorn Sheep/Mule Deer Winter and Spring Habitat Improvement Project : Wildlife Mitigation Project, Libby Dam, Montana : Management Plan.

Energy Technology Data Exchange (ETDEWEB)

Yde, Chis

1990-06-01

The Libby hydroelectric project, located on the Kootenai River in northwestern Montana, resulted in several impacts to the wildlife communities which occupied the habitats inundated by Lake Koocanusa. Montana Department of Fish, Wildlife and Parks, in cooperation with the other management agencies, developed an impact assessment and a wildlife and wildlife habitat mitigation plan for the Libby hydroelectric facility. In response to the mitigation plan, Bonneville Power Administration funded a cooperative project between the Kootenai National Forest and Montana Department of Fish, Wildlife and Parks to develop a long-term habitat enhancement plan for the bighorn sheep and mule deer winter and spring ranges adjacent to Lake Koocanusa. The project goal is to rehabilitate 3372 acres of bighorn sheep and 16,321 acres of mule deer winter and spring ranges on Kootenai National Forest lands adjacent to Lake Koocanusa and to monitor and evaluate the effects of implementing this habitat enhancement work. 2 refs.

Alizes: Wind pumping project in Mauritania

International Nuclear Information System (INIS)

Monvois, J.; Reboulet, M.

1991-01-01

GRET started the title project in May 1990. About 50,000 people live in the area around Rosso, Mauritania, where the project is located. An essential aspect of the project is that villagers themselves need to ask for a wind pump. Moreover, the wind pumps are locally manufactured by a small enterprise. The counterparts are the Mauritanian Ministry of Energy, and the non-gouvernmental Institute Dello and Espace Eolien Regional in France. The Oasis multibladed windmill (2,5 diameter) was chosen, because it is easy to manufacture, it is easy to maintain and quite cheap. To avoid problems it is decided not to pump water from a depth more than 20 meters. The total costs of a wind pump amount to approximately US$ 8,000. for obtaining a wind pump, the villagers need to pay 15% of this total amount. 5 figs., 1 tab

Process development studies on the bioconversion of cellulose and production of ethanol

Energy Technology Data Exchange (ETDEWEB)

Wilke, C.R.; Blanch, H.W.

1978-12-01

Progress is reported in the following areas: raw materials and process evaluation, enzyme fermentation studies, ethanol fermentation studies, hydrolysis reactor development, and utilization of hemi-cellulose sugars. (MHR)

77 FR 34033 - Public Utility District No. 1 of Douglas County; Notice of Authorization for Continued Project...

Science.gov (United States)

2012-06-08

... District No. 1 of Douglas County; Notice of Authorization for Continued Project Operation On May 27, 2010, the Public Utility District No. 1 of Douglas County, licensee for the Wells Hydroelectric Project... regulations thereunder. The Wells Hydroelectric Project is located on the Columbia River in Douglas, Okanogan...

The right view from the wrong location: depth perception in stereoscopic multi-user virtual environments.

Science.gov (United States)

Pollock, Brice; Burton, Melissa; Kelly, Jonathan W; Gilbert, Stephen; Winer, Eliot

2012-04-01

Stereoscopic depth cues improve depth perception and increase immersion within virtual environments (VEs). However, improper display of these cues can distort perceived distances and directions. Consider a multi-user VE, where all users view identical stereoscopic images regardless of physical location. In this scenario, cues are typically customized for one "leader" equipped with a head-tracking device. This user stands at the center of projection (CoP) and all other users ("followers") view the scene from other locations and receive improper depth cues. This paper examines perceived depth distortion when viewing stereoscopic VEs from follower perspectives and the impact of these distortions on collaborative spatial judgments. Pairs of participants made collaborative depth judgments of virtual shapes viewed from the CoP or after displacement forward or backward. Forward and backward displacement caused perceived depth compression and expansion, respectively, with greater compression than expansion. Furthermore, distortion was less than predicted by a ray-intersection model of stereo geometry. Collaboration times were significantly longer when participants stood at different locations compared to the same location, and increased with greater perceived depth discrepancy between the two viewing locations. These findings advance our understanding of spatial distortions in multi-user VEs, and suggest a strategy for reducing distortion.

Hawaii energy strategy project 3: Renewable energy resource assessment and development program

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

RLA Consulting (RLA) has been retained by the State of Hawaii Department of Business, Economic Development and Tourism (DBEDT) to conduct a Renewable Energy Resource Assessment and Development Program. This three-phase program is part of the Hawaii Energy Strategy (HES), which is a multi-faceted program intended to produce an integrated energy strategy for the State of Hawaii. The purpose of Phase 1 of the project, Development of a Renewable Energy Resource Assessment Plan, is to better define the most promising potential renewable energy projects and to establish the most suitable locations for project development in the state. In order to accomplish this goal, RLA has identified constraints and requirements for renewable energy projects from six different renewable energy resources: wind, solar, biomass, hydro, wave, and ocean thermal. These criteria were applied to areas with sufficient resource for commercial development and the results of Phase 1 are lists of projects with the most promising development potential for each of the technologies under consideration. Consideration of geothermal energy was added to this investigation under a separate contract with DBEDT. In addition to the project lists, a monitoring plan was developed with recommended locations and a data collection methodology for obtaining additional wind and solar data. This report summarizes the results of Phase 1. 11 figs., 22 tabs.

Topography and collateralization of dopaminergic projections to primary motor cortex in rats.

Science.gov (United States)

Hosp, Jonas A; Nolan, Helen E; Luft, Andreas R

2015-05-01

Dopaminergic signaling within the primary motor cortex (M1) is necessary for successful motor skill learning. Dopaminergic neurons projecting to M1 are located in the ventral tegmental area (VTA, nucleus A10) of the midbrain. It is unknown which behavioral correlates are encoded by these neurons. The objective here is to investigate whether VTA-M1 fibers are collaterals of projections to prefrontal cortex (PFC) or nucleus accumbens (NAc) or if they form a distinct pathway. In rats, multiple-site retrograde fluorescent tracers were injected into M1, PFC and the core region of the NAc and VTA sections investigated for concomitant labeling of different tracers. Dopaminergic neurons projecting to M1, PFC and NAc were found in nucleus A10 and to a lesser degree in the medial nucleus A9. Neurons show high target specificity, minimal collateral branching to other than their target area and hardly cross the midline. Whereas PFC- and NAc-projecting neurons are indistinguishably intermingled within the ventral portion of dopaminergic nuclei in middle and caudal midbrain, M1-projecting neurons are only located within the dorsal part of the rostral midbrain. Within M1, the forelimb representation receives sevenfold more dopaminergic projections than the hindlimb representation. This strong rostro-caudal gradient as well as the topographical preference to dorsal structures suggest that projections to M1 emerged late in the development of the dopaminergic systems in and form a functionally distinct system.

Plutonium and minor actinides management in thermal high - temperature reactors - the EU FP6 project puma

International Nuclear Information System (INIS)

Kuijper, J. C.

2007-01-01

key elements, which are not covered by these other projects. Earlier projects indicate favourable characteristics of HTRs with respect to Pu burning. So, core physics of Pu/MA fuel cycles for HTRs will be investigated to optimise the CP fuel and reactor characteristics and to assure nuclear stability of a Pu/MA HTR core, under both normal and abnormal operating conditions. The starting point of this investigation comprises the two main contemporary HTR designs, viz. the pebble-bed type HTR, represented by the South-African PBMR, and hexagonal block type HTR, represented by the GT-MHR. It is also envisaged to optimise present Pu CP design and to explore feasibility for MA fuel. New CP designs will be explored that can withstand very high burn-ups and are well adapted for disposal after irradiation. The project benefits greatly from access to past knowledge from Belgonucleaire's Pu HTR fuel irradiation tests of the 1970-s, and also secures access to materials made at that time. (Very) High Temperature Reactor (VHTR) Pu/MA transmuters are envisaged to operate in a global system of various reactor systems and fuel cycle facilities. Fuel cycle studies are envisaged to study the symbiosis to LWR, GCFR and ADS, and to quantify waste streams and radio toxic inventories. The technical, economic, environmental and socio-political impact will be assessed as well. The PUMA project runs from September 1, 2006, until August 31, 2009, and is being executed by a consortium of 15 European partner organisations and one from the USA. The paper presents an overview of planned activities and preliminary/expected results

GLPP: A Game-Based Location Privacy-Preserving Framework in Account Linked Mixed Location-Based Services

Directory of Open Access Journals (Sweden)

Zhuo Ma

2018-01-01

Full Text Available In Location-Based Services (LBSs platforms, such as Foursquare and Swarm, the submitted position for a share or search leads to the exposure of users’ activities. Additionally, the cross-platform account linkage could aggravate this exposure, as the fusion of users’ information can enhance inference attacks on users’ next submitted location. Hence, in this paper, we propose GLPP, a personalized and continuous location privacy-preserving framework in account linked platforms with different LBSs (i.e., search-based LBSs and share-based LBSs. The key point of GLPP is to obfuscate every location submitted in search-based LBSs so as to defend dynamic inference attacks. Specifically, first, possible inference attacks are listed through user behavioral analysis. Second, for each specific attack, an obfuscation model is proposed to minimize location privacy leakage under a given location distortion, which ensures submitted locations’ utility for search-based LBSs. Third, for dynamic attacks, a framework based on zero-sum game is adopted to joint specific obfuscation above and minimize the location privacy leakage to a balanced point. Experiments on real dataset prove the effectiveness of our proposed attacks in Accuracy, Certainty, and Correctness and, meanwhile, also show the performance of our preserving solution in defense of attacks and guarantee of location utility.

Hanford's 100-HX Pump and Treat Project - a Successful Blend of Science, Technology, Construction, and Project Management - 12412

Energy Technology Data Exchange (ETDEWEB)

Albin, Kenneth A.; Bachand, Marie T.; Biebesheimer, Fred H.; Neshem, Dean O.; Smoot, John L. [CH2M HILL Plateau Remediation Company, Richland, Washington 99352 (United States)

2012-07-01

CH2M Hill Plateau Remediation Company (CHPRC) recently completed construction and start-up of the $25 million 100-HX Groundwater Pump and Treat Project for the Department of Energy (DOE) at its Hanford Reservation site in Washington State. From the onset, the 100-HX Project Leadership Team was able to successfully blend the science and technology of a state-of-the-art groundwater pump and treat system with the principles, tools, and techniques of traditional industrial-type construction and project management. From the 1940's through most of the 1980's, the United States used the Hanford Site to produce nuclear material for national defense at reactor sites located along the Columbia River. While the reactors were operational, large volumes of river water were treated with sodium dichromate (to inhibit corrosion of the reactor piping) and used as a coolant for the reactors. After a single pass through the reactor and before being discharged back to the river, the coolant water was sent to unlined retention basins to cool and to allow the short-lived radioactive contaminants to decay. As a result of these operations, hexavalent chromium was introduced to the vadose zone, and ultimately into the groundwater aquifer and the adjacent Columbia River. In addition, numerous leaks and spills of concentrated sodium dichromate stock solution over the lifetime of reactor operations led to higher concentrations of chromate in the vadose zone and groundwater in localized areas. As a result, the 100 Area was included in the National Priorities List sites under the Comprehensive Environmental Response Compensation and Liability Act of 1980 (CERCLA). The mission of the 100-HX Project is to significantly reduce the concentration of hexavalent chromium in the groundwater by treating up to 3.8 billion gallons (14,300 mega-liters) of contaminated water over its first nine years of operations. In order to accomplish this mission, groundwater scientists and geologists using

Resource Contingency Program - Oregon : Final Environmental Impact Statement, Hermiston Power Project.

Energy Technology Data Exchange (ETDEWEB)

United States. Bonneville Power Administration.

1995-09-01

The Bonneville Power Administration (BPA) has statutory responsibilities to supply electrical power to its utility, industrial, and other customers in the Pacific Northwest. In 1990, to cover the outer range of potential load growth with new resources, BPA embarked upon the Resource Contingency Program (RCP). Instead of buying or building generating plants now, BPA has purchased options to acquire power later, if and when it is needed. The decision to acquire any of these option energy projects to fulfill statutory supply obligations will be influenced by Federal system load growth, the outcome of BPA`s Business Plan, required operational changes in Columbia-Snake River Hydroelectric facilities, and the loss of major generating resources. In September 1993, three option development agreements were signed with three proposed natural gas-fired, combined cycle combustion turbine CT projects near Chehalis and Satsop, Washington, and near Hermiston, Oregon. Together these three projects could supply BPA with 1,090 average megawatts (aMW) of power. Under these agreements, sponsors are obtaining permits and conducting project design work, and BPA is completing this EIS process. In September 1993, BPA published a Notice of Intent to prepare an environmental impact statement (EIS) on these three proposed gas-fired combustion turbine projects and held public scoping meetings in October 1993 at each site. In February 1994, BPA released an Implementation Plan on the proposed scope of the EIS. A draft EIS on the three proposed projects was published in February 1995. The impacts of the Chehalis and Satsop projects located in Washington State will be covered in one EIS document, while the impacts of the Hermiston project located in Oregon are covered in this final EIS document. It is BPA`s intent to continue to base the analysis of impacts on the assumption that all three projects may be constructed at some point in the future.

Resource contingency program - Oregon. Final environmental impact statement, Hermiston power project

International Nuclear Information System (INIS)

1995-09-01

The Bonneville Power Administration (BPA) has statutory responsibilities to supply electrical power to its utility, industrial, and other customers in the Pacific Northwest. In 1990, to cover the outer range of potential load growth with new resources, BPA embarked upon the Resource Contingency Program (RCP). Instead of buying or building generating plants now, BPA has purchased options to acquire power later, if and when it is needed. The decision to acquire any of these option energy projects to fulfill statutory supply obligations will be influenced by Federal system load growth, the outcome of BPA's Business Plan, required operational changes in Columbia-Snake River Hydroelectric facilities, and the loss of major generating resources. In September 1993, three option development agreements were signed with three proposed natural gas-fired, combined cycle combustion turbine CT projects near Chehalis and Satsop, Washington, and near Hermiston, Oregon. Together these three projects could supply BPA with 1,090 average megawatts (aMW) of power. Under these agreements, sponsors are obtaining permits and conducting project design work, and BPA is completing this EIS process. In September 1993, BPA published a Notice of Intent to prepare an environmental impact statement (EIS) on these three proposed gas-fired combustion turbine projects and held public scoping meetings in October 1993 at each site. In February 1994, BPA released an Implementation Plan on the proposed scope of the EIS. A draft EIS on the three proposed projects was published in February 1995. The impacts of the Chehalis and Satsop projects located in Washington State will be covered in one EIS document, while the impacts of the Hermiston project located in Oregon are covered in this final EIS document. It is BPA's intent to continue to base the analysis of impacts on the assumption that all three projects may be constructed at some point in the future

PLEIADES HR IN FLIGHT GEOMETRICAL CALIBRATION : LOCATION AND MAPPING OF THE FOCAL PLANE

Directory of Open Access Journals (Sweden)

F. de Lussy

2012-07-01

Full Text Available The Pleiades system, ORFEO system optical component (Optical and Radar Federated Earth Observation consists of a constellation of two satellites for very High Resolution panchromatic and multispectral optical observation of the Earth. Its mission is to cover all European civilian needs (mapping, tracking floods and fires and defence in the category of metric resolution: 0.7m Nadir. The first Pleiades satellite was launched at the end of last year. One of the key objectives of the Pleiades HR (PHR project is to achieve a location accuracy that will allow the use of images in GIS (Geographical Information System without geometrical model improvement by refining on ground control points. The image location without refined model was specified with the precision of the most commonly used tool ie the civil GPS. So the location accuracy has been specified at less than 12m for 90% of the images on a nominal satellite configuration. Very special care has been taken all along the PHR project realization to achieve this very good location accuracy. The final touch is given during the in-orbit commissioning phase which lasts until June 2012. The geometric quality implies to tune the parameters involved in the geolocation model (geometric calibration: besides attitude and orbit restitution tuning (not considered here, it consists in estimating the biases between the instrument orientation and the AOCS reference frame, and also the sight line of each detector in the focal plane. This is called static geometrical model. The analysis of dynamic perturbations outside of the model are the second most important image quality objective of in-flight commissioning, not described in this paper. Finally “image quality assessment” consists in evaluating the image quality obtained in the final products. For geolocation model, it is quantified by the absolute geolocation and the pointing accuracies, and it is a main contributor in length alteration and planimetric and

Suggested data-gathering methods for the assessment of attitudes of Nevada citizens toward location of a repository at Yucca Mountain: Final report

Energy Technology Data Exchange (ETDEWEB)

Bradbury, J A

1986-12-01

The purpose of this paper is to outline a variety of methods that could be used by the Nevada Nuclear Waste Storage Investigations (NNWSI) Project to assess the attitudes of Nevada citizens toward the location of a repository at Yucca Mountain. The paper is divided into three chapters: Chapter 1 provides a background discussion; Chapter 2 discusses different social science methods and summarizes the advantages and disadvantages of each; and Chapter 3 outlines a conceptual approach to integrating several methods into one overall strategy for assessment. An assessment of the attitudes of persons who may be affected by repository activities will (1) enhance the NNWSI Project`s ability to conduct the social impact assessment that can be included in an Environmental Impact Statement (EIS); (2) provide an information base for understanding and anticipating public responses; (3) allow the NNWSI Project to scope and prioritize issues that arise in the public debate that may occur over the repository location; and (4) help to facilitate communication and cooperation between the US Department of Energy (DOE) and state and local entities in the process of conducting the study. 114 refs., 1 tab.

Industrial location and competitiveness

NARCIS (Netherlands)

S. Brakman (Steven); J.H. Garretsen (Harry); J.G.M. van Marrewijk (Charles)

2006-01-01

textabstractThe interaction between the extent of location advantages and the intensity of firm competition relative to the size of the market jointly determines the location of industrial activity. Technology, factor endowments, geography, and scale economies are influential for determining

Design of a TDOA location engine and development of a location system based on chirp spread spectrum.

Science.gov (United States)

Wang, Rui-Rong; Yu, Xiao-Qing; Zheng, Shu-Wang; Ye, Yang

2016-01-01

Location based services (LBS) provided by wireless sensor networks have garnered a great deal of attention from researchers and developers in recent years. Chirp spread spectrum (CSS) signaling formatting with time difference of arrival (TDOA) ranging technology is an effective LBS technique in regards to positioning accuracy, cost, and power consumption. The design and implementation of the location engine and location management based on TDOA location algorithms were the focus of this study; as the core of the system, the location engine was designed as a series of location algorithms and smoothing algorithms. To enhance the location accuracy, a Kalman filter algorithm and moving weighted average technique were respectively applied to smooth the TDOA range measurements and location results, which are calculated by the cooperation of a Kalman TDOA algorithm and a Taylor TDOA algorithm. The location management server, the information center of the system, was designed with Data Server and Mclient. To evaluate the performance of the location algorithms and the stability of the system software, we used a Nanotron nanoLOC Development Kit 3.0 to conduct indoor and outdoor location experiments. The results indicated that the location system runs stably with high accuracy at absolute error below 0.6 m.

Department of Energy's regional solar updates 1979. Volume two. Invited papers and appendices

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

Twenty-six invited papers for the regional meetings at Dearborn, Michigan; Orlando, Florida; Philadelphia, Pennsylvania; and Los Angeles, California are included. Separate abstracts were prepared for each paper. (MHR)

76 FR 40905 - Turnagain Arm Tidal Electric Energy Project; Notice of Intent To File License Application, Filing...

Science.gov (United States)

2011-07-12

... Tidal Electric Energy Project; Notice of Intent To File License Application, Filing of Pre-Application....: 13509-001. c. Dated Filed: May 11, 2011. d. Submitted By: Turnagain Arm Tidal Energy Corporation. e. Name of Project: Turnagain Arm Tidal Electric Energy Project. f. Location: Of the Upper Cook Inlet off...

75 FR 70348 - Notice of Availability of the Draft Environmental Impact Statement for a Proposed Project in...

Science.gov (United States)

2010-11-17

... Environmental Impact Statement for a Proposed Project in Mariposa County, CA AGENCY: Federal Highway... Restoration Project in Mariposa County, California. DATES: Public circulation of this document will begin on... project on Wednesday, December 8, 2010 between 4 p.m. and 7 p.m. in Mariposa. The location is Mariposa...

7 CFR 1924.106 - Location.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Location. 1924.106 Section 1924.106 Agriculture... CONSTRUCTION AND REPAIR Planning and Performing Site Development Work § 1924.106 Location. (a) General. It is... will not finance development on locations that adversely affect properties which are listed or are...

Kvanefjeld uranium project

International Nuclear Information System (INIS)

Erlendsson, G.; Jensen, J.; Kofoed, S.; Paulsen, J.L.

1983-11-01

The draft uranium project ''Kvanefjeld'' describes the establishment and operation of an industrial plant for exploiting the uranium deposit at Kvanefjeld. The draft project is part of the overall pre-feasibility project and is based on its results. The draft project includes two alternative locations for the processing plant and the tailings deposit plant. The ore reserve is estimated at 56 million tons with an average content of 365 PPM. The mine will be established as an open pit, with a slope angle of 55deg. Conventional techniques are used in drilling, blasting and handling the ore. Waste rock with no uranium content will be disposed of in two ponds near the mine. The waste rock volume is estimated at 80 million tons. A processing plant for extracting uranium from the ore will be established. The technical layout of the plant is based on the extraction experiments performed at Risoe from 1981-83. Yearly capacity is 4.2 million tons of ore. Electrical energy will be supplied from a hydroelectric station to be built at Johan Dahl Land. Thermal energy (steam/heat) will be supplied from a coal-fired district heating plant to be built in connection with the processing plant. Expected power consumption is estimated at 225 GWh/year. Heat consumption is of the same order. In the third year the plant is expected to operate at full capacity. Operating costs will be Dkr. 121/ton of ore from years 1 through 7. Consumption of chemicals will be reduced from the 7th year, and operating costs will consequently drop to Dkr. 115/ton of ore. Calculations show that industrial extraction of the uranium deposit in Kvanefjeld is economically advantageous. In addition, the economy of the project is expected to improve by extracting byproducts from the ore. (EG)

The European X-ray Free Electron Laser Project at DESY

CERN Document Server

Schwarz, Andreas

2004-01-01

On February 5, 2003, the German Federal Ministry of Education and Research decided that the X-ray free-electron laser XFEL, proposed by the International TESLA Collaboration, should be realized as a European project and located at DESY/Hamburg. The ministry also announced that in view of the locational advantage, Germany is prepared to cover half of the investment and personnel costs for the XFEL. In the course of the last year work has concentrated on the following areas: setting up of an organizational structure at DESY for the preparation of the project, discussions with potential European partners on several levels, selection of a new site for the XFEL facility and the preparation of the 'plan approval procedure'. The present status of the technical layout of the Linear Accelerator, the SASE Undulator and Photon Beamlines and the experiment stations will be presented.

Opposite latitudinal gradients in projected ocean acidification and bleaching impacts on coral reefs.