Fingerprinting Analysis of Rhizoma Chuanxiong of Commercial Types using 1H Nuclear Magnetic Resonance Spectroscopy and High Performance Liquid Chromatography Method

Institute of Scientific and Technical Information of China (English)

Hai-Lin Qin; An-Jun Deng; Guan-Hua Du; Peng Wang; Jin-Lan Zhang; Zhi-Hong Li

2009-01-01

The 1H nuclear magnetic resonance (1H NMR) fingerprints of fractionated non-polar extracts (control substance for a plant drug (CSPD) A) from Rhizoma chuanxiong, the rhizomes of Ligusticum chuanxiong Hort., of seven specimens from different sources were measured on Fourier Transform (FT)-NMR spectrometer and assigned by comparing them with the 1H NMR spectra of the isolated pure compounds. The 1H NMR fingerprints showed exclusively characteristic resonance signals of the major special constituents of the plant. Although the differences in the relative intensity of the 1H NMR signals due to a discrepancy in the ratio of the major constituents among these samples could be confirmed by high performance liquid chromatography analysis, the general features of the 1H NMR fingerprint established for an authentic sample of the rhizomes of L. chuanxiong exhibited exclusive data from those special compounds and can be used for authenticating L. Chuanxiong species.

Extracting valley-ridge lines from point-cloud-based 3D fingerprint models.

Science.gov (United States)

Pang, Xufang; Song, Zhan; Xie, Wuyuan

2013-01-01

3D fingerprinting is an emerging technology with the distinct advantage of touchless operation. More important, 3D fingerprint models contain more biometric information than traditional 2D fingerprint images. However, current approaches to fingerprint feature detection usually must transform the 3D models to a 2D space through unwrapping or other methods, which might introduce distortions. A new approach directly extracts valley-ridge features from point-cloud-based 3D fingerprint models. It first applies the moving least-squares method to fit a local paraboloid surface and represent the local point cloud area. It then computes the local surface's curvatures and curvature tensors to facilitate detection of the potential valley and ridge points. The approach projects those points to the most likely valley-ridge lines, using statistical means such as covariance analysis and cross correlation. To finally extract the valley-ridge lines, it grows the polylines that approximate the projected feature points and removes the perturbations between the sampled points. Experiments with different 3D fingerprint models demonstrate this approach's feasibility and performance.

[Research on UPLC-PDA fingerprint of andrographis paniculata and quantitative determination of 4 major constituents].

Science.gov (United States)

Huang, Jing-Yi; Liu, Xiao-Lin; Zhou, Shui-Ping; Tong, Ling; Ding, Li

2014-11-01

Andrographis paniculata from different parts and origins were analyzed by UPLC-PDA fingerprint to provide refererice for related preparation technology. Using the peak of andrographolide as reference, 27 common peaks were identified, and digitized UPLC-PDA fingerprints for 23 batches of andrographis paniculata were established in this research. Principal component analysis (PCA) was carried out after feature extraction. The contents of andrographolide, neoandrographolide, deoxyandrographolide, dehydroandrographolide were determined by external standard method. The Plackett-Burman design combined with pareto chart was used to analyze the factors influencing the robustness of the method. It was found that the medicinal part has a more remarkable influence on the quality of andrographis paniculata than the origin. The contents of the 4 lactones the differ greatly in the different parts of andrographis paniculata, and the pH of the mobile phase is an important factor that influenced the robustness of the method.

Development of oil hydrocarbon fingerprinting and identification techniques

International Nuclear Information System (INIS)

Wang Zhendi; Fingas, Merv F.

2003-01-01

Oil, refined product, and pyrogenic hydrocarbons are the most frequently discovered contaminants in the environment. To effectively determine the fate of spilled oil in the environment and to successfully identify source(s) of spilled oil and petroleum products is, therefore, extremely important in many oil-related environmental studies and liability cases. This article briefly reviews the recent development of chemical analysis methodologies which are most frequently used in oil spill characterization and identification studies and environmental forensic investigations. The fingerprinting and data interpretation techniques discussed include oil spill identification protocol, tiered analytical approach, generic features and chemical composition of oils, effects of weathering on hydrocarbon fingerprinting, recognition of distribution patterns of petroleum hydrocarbons, oil type screening and differentiation, analysis of 'source-specific marker' compounds, determination of diagnostic ratios of specific oil constituents, stable isotopic analysis, application of various statistical and numerical analysis tools, and application of other analytical techniques. The issue of how biogenic and pyrogenic hydrocarbons are distinguished from petrogenic hydrocarbons is also addressed

Recovery of latent fingerprints and DNA on human skin.

Science.gov (United States)

Färber, Doris; Seul, Andrea; Weisser, Hans-Joachim; Bohnert, Michael

2010-11-01

The project "Latent Fingerprints and DNA on Human Skin" was the first systematic research in Europe dealing with detection of fingerprints and DNA left by offenders on the skin of corpses. One thousand samples gave results that allow general statements on the materials and methods used. The tests were carried out according to a uniform trial structure. Fingerprints were deposited by natural donors on corpses. The latent fingerprints were treated with magnetic powder or black fingerprint powder. Afterward, they were lifted with silicone casting material (Isomark(®)) or gelatine foil. All lifts were swabbed to recover DNA. It was possible to visualize comparable and identifiable fingerprints on the skin of corpses (16%). In the same categories, magnetic powder (18.4%) yielded better results than black fingerprint powder (13.6%). The number of comparable and identifiable fingerprints decreased on the lifts (12.7%). Isomark(®) (14.9%) was the better lifting material in comparison with gelatine foil (10.1%). In one-third of the samples, DNA could be extracted from the powdered and lifted latents. Black fingerprint powder delivered the better result with a rate of 2.2% for full DNA profiles and profiles useful for exclusion in comparison with 1.8% for the magnetic powder traces. Isomark(®) (3.1%) yielded better results than gelatine foil (0.6%). © 2010 American Academy of Forensic Sciences.

Towards secondary fingerprint classification

CSIR Research Space (South Africa)

Msiza, IS

2011-07-01

Full Text Available an accuracy figure of 76.8%. This small difference between the two figures is indicative of the validity of the proposed secondary classification module. Keywords?fingerprint core; fingerprint delta; primary classifi- cation; secondary classification I..., namely, the fingerprint core and the fingerprint delta. Forensically, a fingerprint core is defined as the innermost turning point where the fingerprint ridges form a loop, while the fingerprint delta is defined as the point where these ridges form a...

Quality evaluation of Shenmaidihuang Pills based on the chromatographic fingerprints and simultaneous determination of seven bioactive constituents.

Science.gov (United States)

Liu, Sifei; Zhang, Guangrui; Qiu, Ying; Wang, Xiaobo; Guo, Lihan; Zhao, Yanxin; Tong, Meng; Wei, Lan; Sun, Lixin

2016-12-01

In this study, we aimed to establish a comprehensive and practical quality evaluation system for Shenmaidihuang pills. A simple and reliable high-performance liquid chromatography coupled with photodiode array detection method was developed both for fingerprint analysis and quantitative determination. In fingerprint analysis, relative retention time and relative peak area were used to identify the common peaks in 18 samples for investigation. Twenty one peaks were selected as the common peaks to evaluate the similarities of 18 Shenmaidihuang pills samples with different manufacture dates. Furthermore, similarity analysis was applied to evaluate the similarity of samples. Hierarchical cluster analysis and principal component analysis were also performed to evaluate the variation of Shenmaidihuang pills. In quantitative analysis, linear regressions, injection precisions, recovery, repeatability and sample stability were all tested and good results were obtained to simultaneously determine the seven identified compounds, namely, 5-hydroxymethylfurfural, morroniside, loganin, paeonol, paeoniflorin, psoralen, isopsoralen in Shenmaidihuang pills. The contents of some analytes in different batches of samples indicated significant difference, especially for 5-hydroxymethylfurfural. So, it was concluded that the chromatographic fingerprint method obtained by high-performance liquid chromatography coupled with photodiode array detection associated with multiple compounds determination is a powerful and meaningful tool to comprehensively conduct the quality control of Shenmaidihuang pills. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The application of infrared chemical imaging to the detection and enhancement of latent fingerprints: method optimization and further findings.

Science.gov (United States)

Tahtouh, Mark; Despland, Pauline; Shimmon, Ronald; Kalman, John R; Reedy, Brian J

2007-09-01

Fourier transform infrared (FTIR) chemical imaging allows the collection of fingerprint images from backgrounds that have traditionally posed problems for conventional fingerprint detection methods. In this work, the suitability of this technique for the imaging of fingerprints on a wider range of difficult surfaces (including polymer banknotes, various types of paper, and aluminum drink cans) has been tested. For each new surface, a systematic methodology was employed to optimize settings such as spectral resolution, number of scans, and pixel aggregation in order to reduce collection time and file-size without compromising spatial resolution and the quality of the final fingerprint image. The imaging of cyanoacrylate-fumed fingerprints on polymer banknotes has been improved, with shorter collection times for larger image areas. One-month-old fingerprints on polymer banknotes have been successfully fumed and imaged. It was also found that FTIR chemical imaging gives high quality images of cyanoacrylate-fumed fingerprints on aluminum drink cans, regardless of the printed background. Although visible and UV light sources do not yield fingerprint images of the same quality on difficult, nonporous backgrounds, in many cases they can be used to locate a fingerprint prior to higher quality imaging by the FTIR technique. Attempts to acquire FTIR images of fingerprints on paper-based porous surfaces that had been treated with established reagents such as ninhydrin were all unsuccessful due to the swamping effect of the cellulose constituents of the paper.

Similarity analyses of chromatographic herbal fingerprints: A review

International Nuclear Information System (INIS)

Goodarzi, Mohammad; Russell, Paul J.; Vander Heyden, Yvan

2013-01-01

Graphical abstract: -- Highlights: •Similarity analyses of herbal fingerprints are reviewed. •Different (dis)similarity approaches are discussed. •(Dis)similarity-metrics and exploratory-analysis approaches are illustrated. •Correlation and distance-based measures are overviewed. •Similarity analyses illustrated by several case studies. -- Abstract: Herbal medicines are becoming again more popular in the developed countries because being “natural” and people thus often assume that they are inherently safe. Herbs have also been used worldwide for many centuries in the traditional medicines. The concern of their safety and efficacy has grown since increasing western interest. Herbal materials and their extracts are very complex, often including hundreds of compounds. A thorough understanding of their chemical composition is essential for conducting a safety risk assessment. However, herbal material can show considerable variability. The chemical constituents and their amounts in a herb can be different, due to growing conditions, such as climate and soil, the drying process, the harvest season, etc. Among the analytical methods, chromatographic fingerprinting has been recommended as a potential and reliable methodology for the identification and quality control of herbal medicines. Identification is needed to avoid fraud and adulteration. Currently, analyzing chromatographic herbal fingerprint data sets has become one of the most applied tools in quality assessment of herbal materials. Mostly, the entire chromatographic profiles are used to identify or to evaluate the quality of the herbs investigated. Occasionally only a limited number of compounds are considered. One approach to the safety risk assessment is to determine whether the herbal material is substantially equivalent to that which is either readily consumed in the diet, has a history of application or has earlier been commercialized i.e. to what is considered as reference material. In order

Similarity analyses of chromatographic herbal fingerprints: A review

Energy Technology Data Exchange (ETDEWEB)

Goodarzi, Mohammad [Department of Analytical Chemistry and Pharmaceutical Technology, Center for Pharmaceutical Research, Vrije Universiteit Brussel, Laarbeeklaan 103, B-1090 Brussels (Belgium); Russell, Paul J. [Safety and Environmental Assurance Centre, Unilever, Colworth Science Park, Sharnbrook, Bedfordshire MK44 1LQ (United Kingdom); Vander Heyden, Yvan, E-mail: yvanvdh@vub.ac.be [Department of Analytical Chemistry and Pharmaceutical Technology, Center for Pharmaceutical Research, Vrije Universiteit Brussel, Laarbeeklaan 103, B-1090 Brussels (Belgium)

2013-12-04

Graphical abstract: -- Highlights: •Similarity analyses of herbal fingerprints are reviewed. •Different (dis)similarity approaches are discussed. •(Dis)similarity-metrics and exploratory-analysis approaches are illustrated. •Correlation and distance-based measures are overviewed. •Similarity analyses illustrated by several case studies. -- Abstract: Herbal medicines are becoming again more popular in the developed countries because being “natural” and people thus often assume that they are inherently safe. Herbs have also been used worldwide for many centuries in the traditional medicines. The concern of their safety and efficacy has grown since increasing western interest. Herbal materials and their extracts are very complex, often including hundreds of compounds. A thorough understanding of their chemical composition is essential for conducting a safety risk assessment. However, herbal material can show considerable variability. The chemical constituents and their amounts in a herb can be different, due to growing conditions, such as climate and soil, the drying process, the harvest season, etc. Among the analytical methods, chromatographic fingerprinting has been recommended as a potential and reliable methodology for the identification and quality control of herbal medicines. Identification is needed to avoid fraud and adulteration. Currently, analyzing chromatographic herbal fingerprint data sets has become one of the most applied tools in quality assessment of herbal materials. Mostly, the entire chromatographic profiles are used to identify or to evaluate the quality of the herbs investigated. Occasionally only a limited number of compounds are considered. One approach to the safety risk assessment is to determine whether the herbal material is substantially equivalent to that which is either readily consumed in the diet, has a history of application or has earlier been commercialized i.e. to what is considered as reference material. In order

Improvement in Saccharification Yield of Mixed Rumen Enzymes by Identification of Recalcitrant Cell Wall Constituents Using Enzyme Fingerprinting.

Science.gov (United States)

Badhan, Ajay; Wang, Yu-Xi; Gruninger, Robert; Patton, Donald; Powlowski, Justin; Tsang, Adrian; McAllister, Tim A

2015-01-01

Identification of recalcitrant factors that limit digestion of forages and the development of enzymatic approaches that improve hydrolysis could play a key role in improving the efficiency of meat and milk production in ruminants. Enzyme fingerprinting of barley silage fed to heifers and total tract indigestible fibre residue (TIFR) collected from feces was used to identify cell wall components resistant to total tract digestion. Enzyme fingerprinting results identified acetyl xylan esterases as key to the enhanced ruminal digestion. FTIR analysis also suggested cross-link cell wall polymers as principal components of indigested fiber residues in feces. Based on structural information from enzymatic fingerprinting and FTIR, enzyme pretreatment to enhance glucose yield from barley straw and alfalfa hay upon exposure to mixed rumen-enzymes was developed. Prehydrolysis effects of recombinant fungal fibrolytic hydrolases were analyzed using microassay in combination with statistical experimental design. Recombinant hemicellulases and auxiliary enzymes initiated degradation of plant structural polysaccharides upon application and improved the in vitro saccharification of alfalfa and barley straw by mixed rumen enzymes. The validation results showed that microassay in combination with statistical experimental design can be successfully used to predict effective enzyme pretreatments that can enhance plant cell wall digestion by mixed rumen enzymes.

A Support Vector Machine Approach for Truncated Fingerprint Image Detection from Sweeping Fingerprint Sensors

Science.gov (United States)

Chen, Chi-Jim; Pai, Tun-Wen; Cheng, Mox

2015-01-01

A sweeping fingerprint sensor converts fingerprints on a row by row basis through image reconstruction techniques. However, a built fingerprint image might appear to be truncated and distorted when the finger was swept across a fingerprint sensor at a non-linear speed. If the truncated fingerprint images were enrolled as reference targets and collected by any automated fingerprint identification system (AFIS), successful prediction rates for fingerprint matching applications would be decreased significantly. In this paper, a novel and effective methodology with low time computational complexity was developed for detecting truncated fingerprints in a real time manner. Several filtering rules were implemented to validate existences of truncated fingerprints. In addition, a machine learning method of supported vector machine (SVM), based on the principle of structural risk minimization, was applied to reject pseudo truncated fingerprints containing similar characteristics of truncated ones. The experimental result has shown that an accuracy rate of 90.7% was achieved by successfully identifying truncated fingerprint images from testing images before AFIS enrollment procedures. The proposed effective and efficient methodology can be extensively applied to all existing fingerprint matching systems as a preliminary quality control prior to construction of fingerprint templates. PMID:25835186

A Support Vector Machine Approach for Truncated Fingerprint Image Detection from Sweeping Fingerprint Sensors

Directory of Open Access Journals (Sweden)

Chi-Jim Chen

2015-03-01

Full Text Available A sweeping fingerprint sensor converts fingerprints on a row by row basis through image reconstruction techniques. However, a built fingerprint image might appear to be truncated and distorted when the finger was swept across a fingerprint sensor at a non-linear speed. If the truncated fingerprint images were enrolled as reference targets and collected by any automated fingerprint identification system (AFIS, successful prediction rates for fingerprint matching applications would be decreased significantly. In this paper, a novel and effective methodology with low time computational complexity was developed for detecting truncated fingerprints in a real time manner. Several filtering rules were implemented to validate existences of truncated fingerprints. In addition, a machine learning method of supported vector machine (SVM, based on the principle of structural risk minimization, was applied to reject pseudo truncated fingerprints containing similar characteristics of truncated ones. The experimental result has shown that an accuracy rate of 90.7% was achieved by successfully identifying truncated fingerprint images from testing images before AFIS enrollment procedures. The proposed effective and efficient methodology can be extensively applied to all existing fingerprint matching systems as a preliminary quality control prior to construction of fingerprint templates.

High-performance thin-layer chromatographic fingerprints of isoflavonoids for distinguishing between Radix Puerariae Lobate and Radix Puerariae Thomsonii.

Science.gov (United States)

Chen, Si-Bao; Liu, He-Ping; Tian, Run-Tao; Yang, Da-Jian; Chen, Shi-Lin; Xu, Hong-Xi; Chan, Albert S C; Xie, Pei-Shan

2006-07-14

The roots of Pueraria lobata (Wild.) Ohwi and Pueraria thomsonii Benth have been officially recorded in all editions of Chinese Pharmacopoeia under the same monograph 'Gegen' (Radix Puerariae, RP). However, in its 2005 edition, the two species were separated into both individual monographs, namely 'Gegen' (Radix Puerariae Lobatae, RPL) and 'Fenge' (Radix Puerariae Thomsonii, RPT), respectively, due to their obvious content discrepancy of puerarin, the major active constituent. In present paper, the fingerprint of high-performance thin-layer chromatography (HPTLC) combining digital scanning profiling was developed to identify and distinguish the both species in detail. The unique properties of the HPTLC fingerprints were validated by analyzing ten batches of Pueraria lobata and P. thomsonii samples, respectively. The common pattern of the HPTLC images of the roots of Pueraria spp. and the respective different ratios of the chemical distribution can directly discern the two species. The corresponding digital scanning profiles provided an easy way for quantifiable comparison among the samples. Obvious difference in ingredient content and HPTLC patterns of the two species questioned their bio-equivalence and explained that recording both species separately in the current edition of Chinese Pharmacopoeia (2005 edition) is reasonable due to not only the content of major constituent, puerarin, but also the peak-to-peak distribution in the fingerprint and integration value of the total components. Furthermore, the HPTLC fingerprint is also suitable for rapid and simple authentication and comparison of the subtle difference among samples with identical plant resource but different geographic locations.

DNA fingerprinting, DNA barcoding, and next generation sequencing technology in plants.

Science.gov (United States)

Sucher, Nikolaus J; Hennell, James R; Carles, Maria C

2012-01-01

DNA fingerprinting of plants has become an invaluable tool in forensic, scientific, and industrial laboratories all over the world. PCR has become part of virtually every variation of the plethora of approaches used for DNA fingerprinting today. DNA sequencing is increasingly used either in combination with or as a replacement for traditional DNA fingerprinting techniques. A prime example is the use of short, standardized regions of the genome as taxon barcodes for biological identification of plants. Rapid advances in "next generation sequencing" (NGS) technology are driving down the cost of sequencing and bringing large-scale sequencing projects into the reach of individual investigators. We present an overview of recent publications that demonstrate the use of "NGS" technology for DNA fingerprinting and DNA barcoding applications.

Similarity analyses of chromatographic herbal fingerprints: a review.

Science.gov (United States)

Goodarzi, Mohammad; Russell, Paul J; Vander Heyden, Yvan

2013-12-04

Herbal medicines are becoming again more popular in the developed countries because being "natural" and people thus often assume that they are inherently safe. Herbs have also been used worldwide for many centuries in the traditional medicines. The concern of their safety and efficacy has grown since increasing western interest. Herbal materials and their extracts are very complex, often including hundreds of compounds. A thorough understanding of their chemical composition is essential for conducting a safety risk assessment. However, herbal material can show considerable variability. The chemical constituents and their amounts in a herb can be different, due to growing conditions, such as climate and soil, the drying process, the harvest season, etc. Among the analytical methods, chromatographic fingerprinting has been recommended as a potential and reliable methodology for the identification and quality control of herbal medicines. Identification is needed to avoid fraud and adulteration. Currently, analyzing chromatographic herbal fingerprint data sets has become one of the most applied tools in quality assessment of herbal materials. Mostly, the entire chromatographic profiles are used to identify or to evaluate the quality of the herbs investigated. Occasionally only a limited number of compounds are considered. One approach to the safety risk assessment is to determine whether the herbal material is substantially equivalent to that which is either readily consumed in the diet, has a history of application or has earlier been commercialized i.e. to what is considered as reference material. In order to help determining substantial equivalence using fingerprint approaches, a quantitative measurement of similarity is required. In this paper, different (dis)similarity approaches, such as (dis)similarity metrics or exploratory analysis approaches applied on herbal medicinal fingerprints, are discussed and illustrated with several case studies. Copyright © 2013

Fingerprint pores extractor

CSIR Research Space (South Africa)

Mngenge, NA

2012-11-01

Full Text Available , this is not always the case because of diseases and hash working conditions that affect fingerprints. In order to maintain high level of security independent of varying fingerprint image quality research suggests the use of other fingerprint features to compliment...

Touchless fingerprint biometrics

CERN Document Server

Labati, Ruggero Donida; Scotti, Fabio

2015-01-01

Offering the first comprehensive analysis of touchless fingerprint-recognition technologies, Touchless Fingerprint Biometrics gives an overview of the state of the art and describes relevant industrial applications. It also presents new techniques to efficiently and effectively implement advanced solutions based on touchless fingerprinting.The most accurate current biometric technologies in touch-based fingerprint-recognition systems require a relatively high level of user cooperation to acquire samples of the concerned biometric trait. With the potential for reduced constraints, reduced hardw

Distorted Fingerprint Verification System

Directory of Open Access Journals (Sweden)

Divya KARTHIKAESHWARAN

2011-01-01

Full Text Available Fingerprint verification is one of the most reliable personal identification methods. Fingerprint matching is affected by non-linear distortion introduced in fingerprint impression during the image acquisition process. This non-linear deformation changes both the position and orientation of minutiae. The proposed system operates in three stages: alignment based fingerprint matching, fuzzy clustering and classifier framework. First, an enhanced input fingerprint image has been aligned with the template fingerprint image and matching score is computed. To improve the performance of the system, a fuzzy clustering based on distance and density has been used to cluster the feature set obtained from the fingerprint matcher. Finally a classifier framework has been developed and found that cost sensitive classifier produces better results. The system has been evaluated on fingerprint database and the experimental result shows that system produces a verification rate of 96%. This system plays an important role in forensic and civilian applications.

Longitudinal study of fingerprint recognition.

Science.gov (United States)

Yoon, Soweon; Jain, Anil K

2015-07-14

Human identification by fingerprints is based on the fundamental premise that ridge patterns from distinct fingers are different (uniqueness) and a fingerprint pattern does not change over time (persistence). Although the uniqueness of fingerprints has been investigated by developing statistical models to estimate the probability of error in comparing two random samples of fingerprints, the persistence of fingerprints has remained a general belief based on only a few case studies. In this study, fingerprint match (similarity) scores are analyzed by multilevel statistical models with covariates such as time interval between two fingerprints in comparison, subject's age, and fingerprint image quality. Longitudinal fingerprint records of 15,597 subjects are sampled from an operational fingerprint database such that each individual has at least five 10-print records over a minimum time span of 5 y. In regard to the persistence of fingerprints, the longitudinal analysis on a single (right index) finger demonstrates that (i) genuine match scores tend to significantly decrease when time interval between two fingerprints in comparison increases, whereas the change in impostor match scores is negligible; and (ii) fingerprint recognition accuracy at operational settings, nevertheless, tends to be stable as the time interval increases up to 12 y, the maximum time span in the dataset. However, the uncertainty of temporal stability of fingerprint recognition accuracy becomes substantially large if either of the two fingerprints being compared is of poor quality. The conclusions drawn from 10-finger fusion analysis coincide with the conclusions from single-finger analysis.

Study on transfer rule of chemical constituents of tianshu capsule in productive process by high-performance liquid chromatography coupled with diode-array detection and quadrupole time-of-flight tandem mass spectrometry

International Nuclear Information System (INIS)

Lian, Y.P.; Xie, D.W.; Li, Y.J.; Xiao, W.; Huang, W.Z.; Ding, G.

2016-01-01

To develop a sensitive and accurate method for the fingerprint study and transfer rule of chemical constituents from Ligusticum chuanxiong Hort and Gastrodia elata Blume to Tianshu capsule in productive process, a high performance liquid chromatography coupled with diode-array detection and electrospray ionization quadrupole time-of-flight mass spectrometry (LC/QTOF-MS) method was established for analysis. The reference fingerprints of aqueous extract intermediate of medicinal material, alcohol extract intermediate of medicinal material and Tianshu capsule was established. The methodology was studied and the similarity was more than 0.99. The chromatographic methods demonstrated a good precision, repeatability, stability, with relative standard deviations of less than 3 percent for relative retention time and relative peak area. According to these fingerprints, some chemical constituents in the fingerprints were identified or tentatively identified based on their retention time, exact molecular weight and literature. Among of them 26 constituents were from Ligusticum chuanxiong Hort and nine components were from Gastrodia elata Blume. 25 out of 26 compounds had entered a transfer process and 17 compounds were transferred from intermediates to the final preparation, the Tianshu capsule. Thus, it is reasonable enough to use this transfer process to demonstrate the production technology. To sum up, this method is sensitive, accurate and useful,and it could provide us an approach to evaluate the production technology of Tianshu capsule. (author)

Physics and fingerprints

Science.gov (United States)

Voss-de Haan, Patrick

2006-08-01

This article discusses a variety of aspects in the detection and development of fingerprints and the physics involved in it. It gives an introduction to some basic issues like composition and properties of fingerprint deposits and a rudimentary framework of dactyloscopy; it covers various techniques for the visualization of latent fingerprints; and it concludes with a view of current research topics. The techniques range from very common procedures, such as powdering and cyanoacrylate fuming, to more demanding methods, for example luminescence and vacuum metal deposition, to fairly unusual approaches like autoradiography. The emphasis is placed on the physical rather than the forensic aspects of these topics while trying to give the physicist—who is not dealing with fingerprinting and forensic science on a daily basis—a feeling for the problems and solutions in the visualization of latent fingerprints.

Gabor filter based fingerprint image enhancement

Science.gov (United States)

Wang, Jin-Xiang

2013-03-01

Fingerprint recognition technology has become the most reliable biometric technology due to its uniqueness and invariance, which has been most convenient and most reliable technique for personal authentication. The development of Automated Fingerprint Identification System is an urgent need for modern information security. Meanwhile, fingerprint preprocessing algorithm of fingerprint recognition technology has played an important part in Automatic Fingerprint Identification System. This article introduces the general steps in the fingerprint recognition technology, namely the image input, preprocessing, feature recognition, and fingerprint image enhancement. As the key to fingerprint identification technology, fingerprint image enhancement affects the accuracy of the system. It focuses on the characteristics of the fingerprint image, Gabor filters algorithm for fingerprint image enhancement, the theoretical basis of Gabor filters, and demonstration of the filter. The enhancement algorithm for fingerprint image is in the windows XP platform with matlab.65 as a development tool for the demonstration. The result shows that the Gabor filter is effective in fingerprint image enhancement technology.

Fingerprints in cancer cells

International Nuclear Information System (INIS)

Servomaa, K.

1994-01-01

Gene research has shown that factors causing cancer, or carcinogens, may leave marks typical of each particular carcinogen (fingerprints) in the genotype of the cell. Radiation, for instance, may leave such fingerprints in a cancer cell. In particular, the discovery of a gene called p53 has yielded much new information on fingerprints. It has been discovered, for example, that toxic fungus and UV-radiation each leave fingerprints in the p53 gene. Based on the detection of fingerprints, it may be possible in the future to tell a cancer patient what factor had trigged the maglinancy

Chemical fingerprint of Ganmaoling granule by double-wavelength ultra high performance liquid chromatography and ultra high performance liquid chromatography with quadrupole time-of-flight mass spectrometry.

Science.gov (United States)

Lou, Qiong; Ye, Xiaolan; Zhou, Yingyi; Li, Hua; Song, Fenyun

2015-06-01

A method incorporating double-wavelength ultra high performance liquid chromatography with quadrupole time-of-flight mass spectrometry was developed for the investigation of the chemical fingerprint of Ganmaoling granule. The chromatographic separations were performed on an ACQUITY UPLC HSS C18 column (2.1 × 50 mm, 1.8 μm) at 30°C using gradient elution with water/formic acid (1%) and acetonitrile at a flow rate of 0.4 mL/min. A total of 11 chemical constituents of Ganmaoling granule were identified from their molecular weight, UV spectra, tandem mass spectrometry data, and retention behavior by comparing the results with those of the reference standards or literature. And 25 peaks were selected as the common peaks for fingerprint analysis to evaluate the similarities among 25 batches of Ganmaoling granule. The results of principal component analysis and orthogonal projection to latent structures discriminant analysis showed that the important chemical markers that could distinguish the different batches were revealed as 4,5-di-O-caffeoylquinic acid, 3,5-di-O-caffeoylquinic acid, and 4-O-caffeoylquinic acid. This is the first report of the ultra high performance liquid chromatography chemical fingerprint and component identification of Ganmaoling granule, which could lay a foundation for further studies of Ganmaoling granule. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

SwyftTapp: An NFC based attendance system using fingerprint ...

African Journals Online (AJOL)

In this paper we discuss the use of NFC technology coupled with fingerprint ... The Department of Computer Engineering, KNUST was used as the scope .... The software design of the project, as shown in Figure 3, involved three main ...

Dealing with Insufficient Location Fingerprints in Wi-Fi Based Indoor Location Fingerprinting

Directory of Open Access Journals (Sweden)

Kai Dong

2017-01-01

Full Text Available The development of the Internet of Things has accelerated research in the indoor location fingerprinting technique, which provides value-added localization services for existing WLAN infrastructures without the need for any specialized hardware. The deployment of a fingerprinting based localization system requires an extremely large amount of measurements on received signal strength information to generate a location fingerprint database. Nonetheless, this requirement can rarely be satisfied in most indoor environments. In this paper, we target one but common situation when the collected measurements on received signal strength information are insufficient, and show limitations of existing location fingerprinting methods in dealing with inadequate location fingerprints. We also introduce a novel method to reduce noise in measuring the received signal strength based on the maximum likelihood estimation, and compute locations from inadequate location fingerprints by using the stochastic gradient descent algorithm. Our experiment results show that our proposed method can achieve better localization performance even when only a small quantity of RSS measurements is available. Especially when the number of observations at each location is small, our proposed method has evident superiority in localization accuracy.

Fingerprint Change: Not Visible, But Tangible.

Science.gov (United States)

Negri, Francesca V; De Giorgi, Annamaria; Bozzetti, Cecilia; Squadrilli, Anna; Petronini, Pier Giorgio; Leonardi, Francesco; Bisogno, Luigi; Garofano, Luciano

2017-09-01

Hand-foot syndrome, a chemotherapy-induced cutaneous toxicity, can cause an alteration in fingerprints causing a setback for cancer patients due to the occurrence of false rejections. A colon cancer patient was fingerprinted after not having been able to use fingerprint recognition devices after 6 months of adjuvant chemotherapy. The fingerprint images were digitally processed to improve fingerprint definition without altering the papillary design. No evidence of skin toxicity was present. Two months later, the situation returned to normal. The fingerprint evaluation conducted on 15 identification points highlighted the quantitative and qualitative fingerprint alteration details detected after the end of chemotherapy and 2 months later. Fingerprint alteration during chemotherapy has been reported, but to our knowledge, this particular case is the first ever reported without evident clinical signs. Alternative fingerprint identification methods as well as improved biometric identification systems are needed in case of unexpected situations. © 2017 American Academy of Forensic Sciences.

Online fingerprint verification.

Science.gov (United States)

Upendra, K; Singh, S; Kumar, V; Verma, H K

2007-01-01

As organizations search for more secure authentication methods for user access, e-commerce, and other security applications, biometrics is gaining increasing attention. With an increasing emphasis on the emerging automatic personal identification applications, fingerprint based identification is becoming more popular. The most widely used fingerprint representation is the minutiae based representation. The main drawback with this representation is that it does not utilize a significant component of the rich discriminatory information available in the fingerprints. Local ridge structures cannot be completely characterized by minutiae. Also, it is difficult quickly to match two fingerprint images containing different number of unregistered minutiae points. In this study filter bank based representation, which eliminates these weakness, is implemented and the overall performance of the developed system is tested. The results have shown that this system can be used effectively for secure online verification applications.

Fingerprint separation: an application of ICA

Science.gov (United States)

Singh, Meenakshi; Singh, Deepak Kumar; Kalra, Prem Kumar

2008-04-01

Among all existing biometric techniques, fingerprint-based identification is the oldest method, which has been successfully used in numerous applications. Fingerprint-based identification is the most recognized tool in biometrics because of its reliability and accuracy. Fingerprint identification is done by matching questioned and known friction skin ridge impressions from fingers, palms, and toes to determine if the impressions are from the same finger (or palm, toe, etc.). There are many fingerprint matching algorithms which automate and facilitate the job of fingerprint matching, but for any of these algorithms matching can be difficult if the fingerprints are overlapped or mixed. In this paper, we have proposed a new algorithm for separating overlapped or mixed fingerprints so that the performance of the matching algorithms will improve when they are fed with these inputs. Independent Component Analysis (ICA) has been used as a tool to separate the overlapped or mixed fingerprints.

Touch DNA collection versus firearm fingerprinting: comparing evidence production and identification outcomes.

Science.gov (United States)

Nunn, Samuel

2013-05-01

A project by a metropolitan police agency in 2008-2009 had police use touch DNA kits to collect cell samples from seized firearms. To assess outcomes, results of touch DNA swabbing of firearms were compared to fingerprinting firearm evidence. The rationale was that fingerprinting, as the older technology, was the baseline against which to compare touch DNA. But little is known about ways to measure touch DNA productivity compared to fingerprinting. To examine differences between the two requires comparable measurements. Two measures were used: quantity of probative or investigative evidence produced and identification outcomes. When applied to firearms seized within an Indianapolis, IN police district, touch DNA produced a larger volume of evidence than fingerprinting, but identification outcomes for the two methods were equal. Because touch DNA was deployed by police patrol officers, there are implications for firearm forensics and the choice of forensic approaches used by police. © 2013 American Academy of Forensic Sciences.

Fingerprints in Compressed Strings

DEFF Research Database (Denmark)

Bille, Philip; Cording, Patrick Hagge; Gørtz, Inge Li

2013-01-01

The Karp-Rabin fingerprint of a string is a type of hash value that due to its strong properties has been used in many string algorithms. In this paper we show how to construct a data structure for a string S of size N compressed by a context-free grammar of size n that answers fingerprint queries...... derivative that captures LZ78 compression and its variations) we get O(loglogN) query time. Hence, our data structures has the same time and space complexity as for random access in SLPs. We utilize the fingerprint data structures to solve the longest common extension problem in query time O(logNlogℓ) and O....... That is, given indices i and j, the answer to a query is the fingerprint of the substring S[i,j]. We present the first O(n) space data structures that answer fingerprint queries without decompressing any characters. For Straight Line Programs (SLP) we get O(logN) query time, and for Linear SLPs (an SLP...

Study on internal to surface fingerprint correlation using optical coherence tomography and internal fingerprint extraction

CSIR Research Space (South Africa)

Darlow, LN

2015-11-01

Full Text Available of, the above-mentioned works. Internal fingerprint zone detection is an improvement as it uses fuzzy c-means to improve clustering performance, uses better cluster result postprocessing, and improves upon the fine-tuning procedure through... Internal fingerprint extraction consists of two main parts: fingerprint zone detection and extraction. Zone detection uses fuzzy c-means clustering to approximate the location of the papillary junction (i.e., the internal fingerprint zone). Edge detection...

Modeling Audio Fingerprints : Structure, Distortion, Capacity

NARCIS (Netherlands)

Doets, P.J.O.

2010-01-01

An audio fingerprint is a compact low-level representation of a multimedia signal. An audio fingerprint can be used to identify audio files or fragments in a reliable way. The use of audio fingerprints for identification consists of two phases. In the enrollment phase known content is fingerprinted,

Fingerprint re-alignment: a solution based on the true fingerprint center point

CSIR Research Space (South Africa)

Msiza, IS

2011-02-01

Full Text Available Solution Based on the True Fingerprint Center Point Ishmael S. Msiza, Brain Leke-Betechuoh, and Tendani Malumedzha Biometrics Research Group ? Information Security CSIR, Modelling & Digital Science Unit Pretoria, Republic of South Africa e... with a pattern that belongs to the Tented Arch (TA) fingerprint class. Fingerprints that belong to the TA class have a single core and a single delta, with the core located almost directly above the delta, as depicted in figure 3 (b). Many singular...

Fingerprint fake detection by optical coherence tomography

Science.gov (United States)

Meissner, Sven; Breithaupt, Ralph; Koch, Edmund

2013-03-01

The most established technique for the identification at biometric access control systems is the human fingerprint. While every human fingerprint is unique, fingerprints can be faked very easily by using thin layer fakes. Because commercial fingerprint scanners use only a two-dimensional image acquisition of the finger surface, they can only hardly differentiate between real fingerprints and fingerprint fakes applied on thin layer materials. A Swept Source OCT system with an A-line rate of 20 kHz and a lateral and axial resolution of approximately 13 μm, a centre wavelength of 1320 nm and a band width of 120 nm (FWHM) was used to acquire fingerprints and finger tips with overlying fakes. Three-dimensional volume stacks with dimensions of 4.5 mm x 4 mm x 2 mm were acquired. The layering arrangement of the imaged finger tips and faked finger tips was analyzed and subsequently classified into real and faked fingerprints. Additionally, sweat gland ducts were detected and consulted for the classification. The manual classification between real fingerprints and faked fingerprints results in almost 100 % correctness. The outer as well as the internal fingerprint can be recognized in all real human fingers, whereby this was not possible in the image stacks of the faked fingerprints. Furthermore, in all image stacks of real human fingers the sweat gland ducts were detected. The number of sweat gland ducts differs between the test persons. The typical helix shape of the ducts was observed. In contrast, in images of faked fingerprints we observe abnormal layer arrangements and no sweat gland ducts connecting the papillae of the outer fingerprint and the internal fingerprint. We demonstrated that OCT is a very useful tool to enhance the performance of biometric control systems concerning attacks by thin layer fingerprint fakes.

HPLC-MS and GC-MS analyses combined with orthogonal partial least squares to identify cytotoxic constituents from turmeric (Curcuma longa L.).

Science.gov (United States)

Jiang, Jianlan; Zhang, Huan; Li, Zidan; Zhang, Xiaohang; Su, Xin; Li, Yan; Qiao, Bin; Yuan, Yingjin

2013-08-01

We investigated the fingerprints of 48 batches of turmeric total extracts (TTE) by HPLC-MS-MS and GC-MS analyses and 43 characteristic peaks (22 constituents from HPLC-MS-MS; 21 from GC-MS) were analyzed qualitatively and quantitatively. An MTT {3-(4,5-dimethylthiazol-2-yl)- 2,5-diphenyltetrazolium bromide} assay was implemented to measure the cytotoxicity of the TTE against HeLa cells. Then we utilized orthogonal partial least squares analysis, which correlated the chemical composition of the TTE to its cytotoxic activity, to identify potential cytotoxic constituents from turmeric. The result showed that 19 constituents contributed significantly to the cytotoxicity. The obtained result was verified by canonical correlation analysis. Comparison with previous reports also indicated some interaction between the curcuminoids and sesquiterpenoids in turmeric.

Chromatographic fingerprinting through chemometric techniques for herbal slimming pills: A way of adulterant identification.

Science.gov (United States)

Shekari, Nafiseh; Vosough, Maryam; Tabar Heidar, Kourosh

2018-05-01

In the current study, gas chromatography-mass spectrometry (GC-MS) fingerprinting of herbal slimming pills assisted by chemometric methods has been presented. Deconvolution of two-way chromatographic signals of nine herbal slimming pills into pure chromatographic and spectral patterns was performed. The peak clusters were resolved using multivariate curve resolution-alternating least squares (MCR-ALS) by employing appropriate constraints. It was revealed that more useful chemical information about the composition of the slimming pills can be obtained by employing sophisticated GC-MS method coupled with proper chemometric tools yielding the extended number of identified constituents. The thorough fingerprinting of the complex mixtures proved the presence of some toxic or carcinogen components, such as toluene, furfural, furfuryl alcohol, styrene, itaconic anhydride, citraconic anhydride, trimethyl phosphate, phenol, pyrocatechol, p-propenylanisole and pyrogallol. In addition, some samples were shown to be adulterated with undeclared ingredients, including stimulants, anorexiant and laxatives such as phenolphthalein, amfepramone, caffeine and sibutramine. Copyright © 2018 Elsevier B.V. All rights reserved.

Classical and quantum fingerprinting strategies

International Nuclear Information System (INIS)

Scott, A.; Walgate, J.; Sanders, B.

2005-01-01

Full text: Fingerprinting enables two parties to infer whether the messages they hold are the same or different when the cost of communication is high: each message is associated with a smaller fingerprint and comparisons between messages are made in terms of their fingerprints alone. When the two parties are forbidden access to a public coin, it is known that fingerprints composed of quantum information can be made exponentially smaller than those composed of classical information. We present specific constructions of classical fingerprinting strategies through the use of constant-weight codes and provide bounds on the worst-case error probability with the help of extremal set theory. These classical strategies are easily outperformed by quantum strategies constructed from line packings and equiangular tight frames. (author)

Fingerprint multicast in secure video streaming.

Science.gov (United States)

Zhao, H Vicky; Liu, K J Ray

2006-01-01

Digital fingerprinting is an emerging technology to protect multimedia content from illegal redistribution, where each distributed copy is labeled with unique identification information. In video streaming, huge amount of data have to be transmitted to a large number of users under stringent latency constraints, so the bandwidth-efficient distribution of uniquely fingerprinted copies is crucial. This paper investigates the secure multicast of anticollusion fingerprinted video in streaming applications and analyzes their performance. We first propose a general fingerprint multicast scheme that can be used with most spread spectrum embedding-based multimedia fingerprinting systems. To further improve the bandwidth efficiency, we explore the special structure of the fingerprint design and propose a joint fingerprint design and distribution scheme. From our simulations, the two proposed schemes can reduce the bandwidth requirement by 48% to 87%, depending on the number of users, the characteristics of video sequences, and the network and computation constraints. We also show that under the constraint that all colluders have the same probability of detection, the embedded fingerprints in the two schemes have approximately the same collusion resistance. Finally, we propose a fingerprint drift compensation scheme to improve the quality of the reconstructed sequences at the decoder's side without introducing extra communication overhead.

Advances in fingerprint analysis.

Science.gov (United States)

Hazarika, Pompi; Russell, David A

2012-04-10

Fingerprints have been used in forensic investigations for the identification of individuals since the late 19th century. However, it is now clear that fingerprints can provide significantly more information about an individual. Here, we highlight the considerable advances in fingerprinting technology that can simultaneously provide chemical information regarding the drugs ingested and the explosives and drugs handled by a person as well as the identity of that individual. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Influence of Skin Diseases on Fingerprint Recognition

Science.gov (United States)

Drahansky, Martin; Dolezel, Michal; Urbanek, Jaroslav; Brezinova, Eva; Kim, Tai-hoon

2012-01-01

There are many people who suffer from some of the skin diseases. These diseases have a strong influence on the process of fingerprint recognition. People with fingerprint diseases are unable to use fingerprint scanners, which is discriminating for them, since they are not allowed to use their fingerprints for the authentication purposes. First in this paper the various diseases, which might influence functionality of the fingerprint-based systems, are introduced, mainly from the medical point of view. This overview is followed by some examples of diseased finger fingerprints, acquired both from dactyloscopic card and electronic sensors. At the end of this paper the proposed fingerprint image enhancement algorithm is described. PMID:22654483

Influence of Skin Diseases on Fingerprint Recognition

Directory of Open Access Journals (Sweden)

Martin Drahansky

2012-01-01

Full Text Available There are many people who suffer from some of the skin diseases. These diseases have a strong influence on the process of fingerprint recognition. People with fingerprint diseases are unable to use fingerprint scanners, which is discriminating for them, since they are not allowed to use their fingerprints for the authentication purposes. First in this paper the various diseases, which might influence functionality of the fingerprint-based systems, are introduced, mainly from the medical point of view. This overview is followed by some examples of diseased finger fingerprints, acquired both from dactyloscopic card and electronic sensors. At the end of this paper the proposed fingerprint image enhancement algorithm is described.

Maximum Likelihood Reconstruction for Magnetic Resonance Fingerprinting.

Science.gov (United States)

Zhao, Bo; Setsompop, Kawin; Ye, Huihui; Cauley, Stephen F; Wald, Lawrence L

2016-08-01

This paper introduces a statistical estimation framework for magnetic resonance (MR) fingerprinting, a recently proposed quantitative imaging paradigm. Within this framework, we present a maximum likelihood (ML) formalism to estimate multiple MR tissue parameter maps directly from highly undersampled, noisy k-space data. A novel algorithm, based on variable splitting, the alternating direction method of multipliers, and the variable projection method, is developed to solve the resulting optimization problem. Representative results from both simulations and in vivo experiments demonstrate that the proposed approach yields significantly improved accuracy in parameter estimation, compared to the conventional MR fingerprinting reconstruction. Moreover, the proposed framework provides new theoretical insights into the conventional approach. We show analytically that the conventional approach is an approximation to the ML reconstruction; more precisely, it is exactly equivalent to the first iteration of the proposed algorithm for the ML reconstruction, provided that a gridding reconstruction is used as an initialization.

Fingerprint start the next generation of payment method : Fingerprint payment: a new mode of mobile payment

OpenAIRE

Wu, Chong

2016-01-01

In the generation of mobile internet, fingerprint payment is one of the most popular topics at the moment. China has a big market and many users are using the mobile payment methods. There are a large number of mobile phones equipped with fingerprint recognition technology. As we know, fingerprint payment brings us more convenience and safety. We do not need to use many bankcards, and fingerprint also eliminates the users from the trouble of queuing to pay. However, users send traditional dig...

Operational benefits and challenges of the use of fingerprint statistical models: a field study.

Science.gov (United States)

Neumann, Cedric; Mateos-Garcia, Ismael; Langenburg, Glenn; Kostroski, Jennifer; Skerrett, James E; Koolen, Martin

2011-10-10

Research projects aimed at proposing fingerprint statistical models based on the likelihood ratio framework have shown that low quality finger impressions left on crime scenes may have significant evidential value. These impressions are currently either not recovered, considered to be of no value when first analyzed by fingerprint examiners, or lead to inconclusive results when compared to control prints. There are growing concerns within the fingerprint community that recovering and examining these low quality impressions will result in a significant increase of the workload of fingerprint units and ultimately of the number of backlogged cases. This study was designed to measure the number of impressions currently not recovered or not considered for examination, and to assess the usefulness of these impressions in terms of the number of additional detections that would result from their examination. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Reference point detection for improved fingerprint matching

NARCIS (Netherlands)

Ignatenko, T.; Kalker, A.A.C.M.; Veen, van der M.; Bazen, A.; Delp, E.J.; Wong, P.W.

2006-01-01

One of the important stages of fingerprint recognition is the registration of the fingerprints with respect to the original template. This is not a straightforward task as fingerprint images may have been subject to rotations and translations. Popular techniques for fingerprint registration use a

Data Compression of Fingerprint Minutiae

OpenAIRE

VISHAL SHRIVASTAVA; SUMIT SHARMA

2012-01-01

Biometric techniques have usual advantages over conventional personal identification technique. Among various commercially available biometric techniques such as face, fingerprint, Iris etc., fingerprint-based techniques are the most accepted recognition system. Fingerprints are trace or impression of patterns created byfriction ridges of the skin in the fingers and thumbs. Steganography usually used in smart card is a safe technique for authenticating a person. In steganography, biometric ch...

Fingerprint verification prediction model in hand dermatitis.

Science.gov (United States)

Lee, Chew K; Chang, Choong C; Johor, Asmah; Othman, Puwira; Baba, Roshidah

2015-07-01

Hand dermatitis associated fingerprint changes is a significant problem and affects fingerprint verification processes. This study was done to develop a clinically useful prediction model for fingerprint verification in patients with hand dermatitis. A case-control study involving 100 patients with hand dermatitis. All patients verified their thumbprints against their identity card. Registered fingerprints were randomized into a model derivation and model validation group. Predictive model was derived using multiple logistic regression. Validation was done using the goodness-of-fit test. The fingerprint verification prediction model consists of a major criterion (fingerprint dystrophy area of ≥ 25%) and two minor criteria (long horizontal lines and long vertical lines). The presence of the major criterion predicts it will almost always fail verification, while presence of both minor criteria and presence of one minor criterion predict high and low risk of fingerprint verification failure, respectively. When none of the criteria are met, the fingerprint almost always passes the verification. The area under the receiver operating characteristic curve was 0.937, and the goodness-of-fit test showed agreement between the observed and expected number (P = 0.26). The derived fingerprint verification failure prediction model is validated and highly discriminatory in predicting risk of fingerprint verification in patients with hand dermatitis. © 2014 The International Society of Dermatology.

A High Throughput Ambient Mass Spectrometric Approach to Species Identification and Classification from Chemical Fingerprint Signatures

Science.gov (United States)

Musah, Rabi A.; Espinoza, Edgard O.; Cody, Robert B.; Lesiak, Ashton D.; Christensen, Earl D.; Moore, Hannah E.; Maleknia, Simin; Drijfhout, Falko P.

2015-01-01

A high throughput method for species identification and classification through chemometric processing of direct analysis in real time (DART) mass spectrometry-derived fingerprint signatures has been developed. The method entails introduction of samples to the open air space between the DART ion source and the mass spectrometer inlet, with the entire observed mass spectral fingerprint subjected to unsupervised hierarchical clustering processing. A range of both polar and non-polar chemotypes are instantaneously detected. The result is identification and species level classification based on the entire DART-MS spectrum. Here, we illustrate how the method can be used to: (1) distinguish between endangered woods regulated by the Convention for the International Trade of Endangered Flora and Fauna (CITES) treaty; (2) assess the origin and by extension the properties of biodiesel feedstocks; (3) determine insect species from analysis of puparial casings; (4) distinguish between psychoactive plants products; and (5) differentiate between Eucalyptus species. An advantage of the hierarchical clustering approach to processing of the DART-MS derived fingerprint is that it shows both similarities and differences between species based on their chemotypes. Furthermore, full knowledge of the identities of the constituents contained within the small molecule profile of analyzed samples is not required. PMID:26156000

Stereoselective virtual screening of the ZINC database using atom pair 3D-fingerprints.

Science.gov (United States)

Awale, Mahendra; Jin, Xian; Reymond, Jean-Louis

2015-01-01

discovery projects. Graphical abstractAtom pair fingerprints based on through-space distances (3DAPfp) provide better shape encoding than atom pair fingerprints based on topological distances (APfp) as measured by the recovery of ROCS shape analogs by fp similarity.

An effective one-dimensional anisotropic fingerprint enhancement algorithm

Science.gov (United States)

Ye, Zhendong; Xie, Mei

2012-01-01

Fingerprint identification is one of the most important biometric technologies. The performance of the minutiae extraction and the speed of the fingerprint verification system rely heavily on the quality of the input fingerprint images, so the enhancement of the low fingerprint is a critical and difficult step in a fingerprint verification system. In this paper we proposed an effective algorithm for fingerprint enhancement. Firstly we use normalization algorithm to reduce the variations in gray level values along ridges and valleys. Then we utilize the structure tensor approach to estimate each pixel of the fingerprint orientations. At last we propose a novel algorithm which combines the advantages of onedimensional Gabor filtering method and anisotropic method to enhance the fingerprint in recoverable region. The proposed algorithm has been evaluated on the database of Fingerprint Verification Competition 2004, and the results show that our algorithm performs within less time.

An Introduction to DNA Fingerprinting.

Science.gov (United States)

Hepfer, Carol Ely; And Others

1993-01-01

Provides background information on DNA fingerprinting, and describes exercises for introducing general biology students at the high school or college level to the methodology and applications of DNA fingerprinting. (PR)

An investigation of fake fingerprint detection approaches

Science.gov (United States)

Ahmad, Asraful Syifaa'; Hassan, Rohayanti; Othman, Razib M.

2017-10-01

The most reliable biometrics technology, fingerprint recognition is widely used in terms of security due to its permanence and uniqueness. However, it is also vulnerable to the certain type of attacks including presenting fake fingerprints to the sensor which requires the development of new and efficient protection measures. Particularly, the aim is to identify the most recent literature related to the fake fingerprint recognition and only focus on software-based approaches. A systematic review is performed by analyzing 146 primary studies from the gross collection of 34 research papers to determine the taxonomy, approaches, online public databases, and limitations of the fake fingerprint. Fourteen software-based approaches have been briefly described, four limitations of fake fingerprint image were revealed and two known fake fingerprint databases were addressed briefly in this review. Therefore this work provides an overview of an insight into the current understanding of fake fingerprint recognition besides identifying future research possibilities.

Predicting the performance of fingerprint similarity searching.

Science.gov (United States)

Vogt, Martin; Bajorath, Jürgen

2011-01-01

Fingerprints are bit string representations of molecular structure that typically encode structural fragments, topological features, or pharmacophore patterns. Various fingerprint designs are utilized in virtual screening and their search performance essentially depends on three parameters: the nature of the fingerprint, the active compounds serving as reference molecules, and the composition of the screening database. It is of considerable interest and practical relevance to predict the performance of fingerprint similarity searching. A quantitative assessment of the potential that a fingerprint search might successfully retrieve active compounds, if available in the screening database, would substantially help to select the type of fingerprint most suitable for a given search problem. The method presented herein utilizes concepts from information theory to relate the fingerprint feature distributions of reference compounds to screening libraries. If these feature distributions do not sufficiently differ, active database compounds that are similar to reference molecules cannot be retrieved because they disappear in the "background." By quantifying the difference in feature distribution using the Kullback-Leibler divergence and relating the divergence to compound recovery rates obtained for different benchmark classes, fingerprint search performance can be quantitatively predicted.

A Compressed Sensing Framework for Magnetic Resonance Fingerprinting

OpenAIRE

Davies, Mike; Puy, Gilles; Vandergheynst, Pierre; Wiaux, Yves

2013-01-01

Inspired by the recently proposed Magnetic Resonance Fingerprinting (MRF) technique, we develop a principled compressed sensing framework for quantitative MRI. The three key components are: a random pulse excitation sequence following the MRF technique; a random EPI subsampling strategy and an iterative projection algorithm that imposes consistency with the Bloch equations. We show that theoretically, as long as the excitation sequence possesses an appropriate form of persistent excitation, w...

Studies on Chromatographic Fingerprint and Fingerprinting Profile-Efficacy Relationship of Saxifraga stolonifera Meerb.

Directory of Open Access Journals (Sweden)

Xing-Dong Wu

2015-12-01

Full Text Available This work investigated the spectrum-effect relationships between high performance liquid chromatography (HPLC fingerprints and the anti-benign prostatic hyperplasia activities of aqueous extracts from Saxifraga stolonifera. The fingerprints of S. stolonifera from various sources were established by HPLC and evaluated by similarity analysis (SA, hierarchical clustering analysis (HCA and principal component analysis (PCA. Nine samples were obtained from these 24 batches of different origins, according to the results of SA, HCA and the common chromatographic peaks area. A testosterone-induced mouse model of benign prostatic hyperplasia (BPH was used to establish the anti-benign prostatic hyperplasia activities of these nine S. stolonifera samples. The model was evaluated by analyzing prostatic index (PI, serum acid phosphatase (ACP activity, concentrations of serum dihydrotestosterone (DHT, prostatic acid phosphatase (PACP and type II 5α-reductase (SRD5A2. The spectrum-effect relationships between HPLC fingerprints and anti-benign prostatic hyperplasia activities were investigated using Grey Correlation Analysis (GRA and partial least squares regression (PLSR. The results showed that a close correlation existed between the fingerprints and anti-benign prostatic hyperplasia activities, and peak 14 (chlorogenic acid, peak 17 (quercetin 5-O-β-d-glucopyranoside and peak 18 (quercetin 3-O-β-l-rhamno-pyranoside in the HPLC fingerprints might be the main active components against anti-benign prostatic hyperplasia. This work provides a general model for the study of spectrum-effect relationships of S. stolonifera by combing HPLC fingerprints with a testosterone-induced mouse model of BPH, which can be employed to discover the principle components of anti-benign prostatic hyperplasia bioactivity.

Three-dimensional fingerprint recognition by using convolution neural network

Science.gov (United States)

Tian, Qianyu; Gao, Nan; Zhang, Zonghua

2018-01-01

With the development of science and technology and the improvement of social information, fingerprint recognition technology has become a hot research direction and been widely applied in many actual fields because of its feasibility and reliability. The traditional two-dimensional (2D) fingerprint recognition method relies on matching feature points. This method is not only time-consuming, but also lost three-dimensional (3D) information of fingerprint, with the fingerprint rotation, scaling, damage and other issues, a serious decline in robustness. To solve these problems, 3D fingerprint has been used to recognize human being. Because it is a new research field, there are still lots of challenging problems in 3D fingerprint recognition. This paper presents a new 3D fingerprint recognition method by using a convolution neural network (CNN). By combining 2D fingerprint and fingerprint depth map into CNN, and then through another CNN feature fusion, the characteristics of the fusion complete 3D fingerprint recognition after classification. This method not only can preserve 3D information of fingerprints, but also solves the problem of CNN input. Moreover, the recognition process is simpler than traditional feature point matching algorithm. 3D fingerprint recognition rate by using CNN is compared with other fingerprint recognition algorithms. The experimental results show that the proposed 3D fingerprint recognition method has good recognition rate and robustness.

Latent fingerprints on different type of screen protective films

Directory of Open Access Journals (Sweden)

Yuttana Sudjaroen

2016-07-01

Full Text Available The purpose of this research was to study the quality of latent fingerprint on different types of screen protective films including screen protector, matte screen protector, anti-fingerprint clear screen protector and anti-fingerprint matte screen protector by using black powder method in developing latent fingerprints. The fingerprints were performed by 10 volunteers whose fingers (right index, right thumb, left index and left thumb were stubbing at different types of screen protective films and subsequently latent fingerprints were developed by brushing with black powder. Automated Fingerprint Identification System (AFIS counted the numbers of minutiae points from 320 latent fingerprints. Anti-fingerprint matte screen protective film produced the best quality of latent fingerprint with an average minutiae point 72.65, followed by matte screen protective film, clear screen protective film and anti-fingerprint clear screen protective film with an average minutiae point of 155.2, 135.0 and 72.65 respectively. The quality of latent fingerprints developed between a clear and a matte surface of screen protective films showed a significant difference (sig>0.05, whereas the coat and the non-coat with anti-fingerprint chemical revealed a non-significant difference (sig<0.05 in their number of minutiae points.

Active multispectral reflection fingerprinting of persistent chemical agents

Science.gov (United States)

Tholl, H. D.; Münzhuber, F.; Kunz, J.; Raab, M.; Rattunde, M.; Hugger, S.; Gutty, F.; Grisard, A.; Larat, C.; Papillon, D.; Schwarz, M.; Lallier, E.; Kastek, M.; Piatkowski, T.; Brygo, F.; Awanzino, C.; Wilsenack, F.; Lorenzen, A.

2017-10-01

Remote detection of toxic chemicals of very low vapour pressure deposited on surfaces in form of liquid films, droplets or powder is a capability that is needed to protect operators and equipment in chemical warfare scenarios and in industrial environments. Infrared spectroscopy is a suitable means to support this requirement. Available instruments based on passive emission spectroscopy have difficulties in discriminating the infrared emission spectrum of the surface background from that of the contamination. Separation of background and contamination is eased by illuminating the surface with a spectrally tune-able light source and by analyzing the reflectivity spectrum. The project AMURFOCAL (Active Multispectral Reflection Fingerprinting of Persistent Chemical Agents) has the research topic of stand-off detection and identification of chemical warfare agents (CWAs) with amplified quantum cascade laser technology in the long-wave infrared spectral range. The project was conducted under the Joint Investment Programme (JIP) on CBRN protection funded through the European Defence Agency (EDA). The AMURFOCAL instrument comprises a spectrally narrow tune-able light source with a broadband infrared detector and chemometric data analysis software. The light source combines an external cavity quantum cascade laser (EC-QCL) with an optical parametric amplifier (OPA) to boost the peak output power of a short laser pulse tune-able over the infrared fingerprint region. The laser beam is focused onto a target at a distance between 10 and 20 m. A 3D data cube is registered by tuning the wavelength of the laser emission while recording the received signal scattered off the target using a multi-element infrared detector. A particular chemical is identified through the extraction of its characteristic spectral fingerprint out of the measured data. The paper describes the AMURFOCAL instrument, its functional units, and its principles of operation.

Fingerprinting analysis of Saposhnikovia divaricata using 1H nuclear magnetic resonance spectroscopy and high performance liquid chromatography.

Science.gov (United States)

Xin, Yue-Yang; Deng, An-Jun; Du, Guan-Hua; Zhang, Jin-Lan; Qin, Hai-Lin

2010-09-01

The (1)H nuclear magnetic resonance ((1)H NMR) fingerprints of fractionated non-polar and polar extracts (control substance for plant drug [CSPD] A and B) from the roots of 12 specimens of Saposhnikovia divaricata (Turcz.) Schischk were achieved with Fourier Transform (FT)-NMR spectrometer and assigned by comparison to each other and to the (1)H NMR spectra of the isolated individual compounds. These fingerprints were found to be uniform in terms of the specificity for the implication of all 12 specimens being systematically of the same origin. The uniformity was further affirmed by high performance liquid chromatography (HPLC), which also revealed exactly identical specificity for the identified S. divaricata species with the (1)H NMR appearances of corresponding CSPD on the part of the composition of characteristic constituents when comparing to corresponding individual compounds. This investigation unambiguously shows that the specific signals from the chemotaxonomically significant compounds of chromones and coumarins in S. divaricata are exhibited distinctively in the composite features of both (1)H NMR fingerprints and HPLC profiles. The (1)H NMR and HPLC profiles established can successfully be used as reference for the authentication of the origin of S. divaricata species as well as for chemotaxonomic studies.

Fingerprints in compressed strings

DEFF Research Database (Denmark)

Bille, Philip; Gørtz, Inge Li; Cording, Patrick Hagge

2017-01-01

In this paper we show how to construct a data structure for a string S of size N compressed into a context-free grammar of size n that supports efficient Karp–Rabin fingerprint queries to any substring of S. That is, given indices i and j, the answer to a query is the fingerprint of the substring S......[i,j]. We present the first O(n) space data structures that answer fingerprint queries without decompressing any characters. For Straight Line Programs (SLP) we get O(log⁡N) query time, and for Linear SLPs (an SLP derivative that captures LZ78 compression and its variations) we get O(log⁡log⁡N) query time...

Evaluation of the quality consistency of powdered poppy capsule extractive by an averagely linear-quantified fingerprint method in combination with antioxidant activities and two compounds analyses.

Science.gov (United States)

Zhang, Yujing; Sun, Guoxiang; Hou, Zhifei; Yan, Bo; Zhang, Jing

2017-12-01

A novel averagely linear-quantified fingerprint method was proposed and successfully applied to monitor the quality consistency of alkaloids in powdered poppy capsule extractive. Averagely linear-quantified fingerprint method provided accurate qualitative and quantitative similarities for chromatographic fingerprints of Chinese herbal medicines. The stability and operability of the averagely linear-quantified fingerprint method were verified by the parameter r. The average linear qualitative similarity SL (improved based on conventional qualitative "Similarity") was used as a qualitative criterion in the averagely linear-quantified fingerprint method, and the average linear quantitative similarity PL was introduced as a quantitative one. PL was able to identify the difference in the content of all the chemical components. In addition, PL was found to be highly correlated to the contents of two alkaloid compounds (morphine and codeine). A simple flow injection analysis was developed for the determination of antioxidant capacity in Chinese Herbal Medicines, which was based on the scavenging of 2,2-diphenyl-1-picrylhydrazyl radical by antioxidants. The fingerprint-efficacy relationship linking chromatographic fingerprints and antioxidant activities was investigated utilizing orthogonal projection to latent structures method, which provided important pharmacodynamic information for Chinese herbal medicines quality control. In summary, quantitative fingerprinting based on averagely linear-quantified fingerprint method can be applied for monitoring the quality consistency of Chinese herbal medicines, and the constructed orthogonal projection to latent structures model is particularly suitable for investigating the fingerprint-efficacy relationship. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Case study of 3D fingerprints applications.

Directory of Open Access Journals (Sweden)

Feng Liu

Full Text Available Human fingers are 3D objects. More information will be provided if three dimensional (3D fingerprints are available compared with two dimensional (2D fingerprints. Thus, this paper firstly collected 3D finger point cloud data by Structured-light Illumination method. Additional features from 3D fingerprint images are then studied and extracted. The applications of these features are finally discussed. A series of experiments are conducted to demonstrate the helpfulness of 3D information to fingerprint recognition. Results show that a quick alignment can be easily implemented under the guidance of 3D finger shape feature even though this feature does not work for fingerprint recognition directly. The newly defined distinctive 3D shape ridge feature can be used for personal authentication with Equal Error Rate (EER of ~8.3%. Also, it is helpful to remove false core point. Furthermore, a promising of EER ~1.3% is realized by combining this feature with 2D features for fingerprint recognition which indicates the prospect of 3D fingerprint recognition.

Fingerprint Analysis with Marked Point Processes

DEFF Research Database (Denmark)

Forbes, Peter G. M.; Lauritzen, Steffen; Møller, Jesper

We present a framework for fingerprint matching based on marked point process models. An efficient Monte Carlo algorithm is developed to calculate the marginal likelihood ratio for the hypothesis that two observed prints originate from the same finger against the hypothesis that they originate from...... different fingers. Our model achieves good performance on an NIST-FBI fingerprint database of 258 matched fingerprint pairs....

Collusion-resistant multimedia fingerprinting: a unified framework

Science.gov (United States)

Wu, Min; Trappe, Wade; Wang, Z. Jane; Liu, K. J. Ray

2004-06-01

Digital fingerprints are unique labels inserted in different copies of the same content before distribution. Each digital fingerprint is assigned to an inteded recipient, and can be used to trace the culprits who use their content for unintended purposes. Attacks mounted by multiple users, known as collusion attacks, provide a cost-effective method for attenuating the identifying fingerprint from each coluder, thus collusion poses a reeal challenge to protect the digital media data and enforce usage policies. This paper examines a few major design methodologies for collusion-resistant fingerprinting of multimedia, and presents a unified framework that helps highlight the common issues and the uniqueness of different fingerprinting techniques.

Determination of efficacy of fingermark enhancement reagents; the use of propyl chloroformate for the derivatization of fingerprint amino acids extracted from paper.

Science.gov (United States)

Mink, Tineke; Voorhaar, Annelies; Stoel, Reinoud; de Puit, Marcel

2013-09-01

The analysis of the constituents of fingerprints has been described numerous times, mainly with the purpose of determining the aging effect on fingerprints or showing the differences between donors or groups of donors. In this paper we describe the use of derivatized amino acids to determine the efficacy of the visualization reagents 1,8-diazafluoren-9-one (DFO) and ninhydrin. At present certain conditions are used for the application of these reagents, as determined by trial-and-error investigations, to the effect on fingerprints. The recovery of amino acids from a porous surface can be used as a measure for the efficacy of a visualization agent. In this paper we describe a method for the determination of the amount of amino acid left after reaction with well known fingerprint visualization reagents. This will allow a more scientific approach to method development for fingermark enhancement techniques. Furthermore, investigations on the influence of the concentration of fingermark amino acids, the order of application of and exposure time to reagents and the influence of age of the amino acids were carried out. These studies have resulted in a broader understanding of the mechanism involved in visualization of fingermarks using DFO and ninhydrin. Copyright © 2013 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

Dna fingerprinting - review paper

OpenAIRE

Blundell, Renald

2006-01-01

Before the Polymerase Chain Reaction (PCR) was established, DNA fingerprinting technology has relied for years on Restriction Fragment Length Polymorphism (RFLP) and Variable Number of Tandom Repeats (VNTR) analysis, a very efficient technique but quite laborious and not suitable for high throughput mapping. Since its, development, PCR has provided a new and powerful tool for DNA fingerprinting.

Electronic fingerprinting of the dead.

Science.gov (United States)

Rutty, G N; Stringer, K; Turk, E E

2008-01-01

To date, a number of methods exist for the capture of fingerprints from cadavers that can then be used in isolation as a primary method for the identification of the dead. We report the use of a handheld, mobile wireless unit used in conjunction with a personal digital assistant (PDA) device for the capture of fingerprints from the dead. We also consider a handheld single-digit fingerprint scanner that utilises a USB laptop connection for the electronic capture of cadaveric fingerprints. Both are single-operator units that, if ridge detail is preserved, can collect a 10-set of finger pad prints in approximately 45 and 90 s, respectively. We present our observations on the restrictions as to when such devices can be used with cadavers. We do, however, illustrate that the images are of sufficient quality to allow positive identification from finger pad prints of the dead. With the development of mobile, handheld, biometric, PDA-based units for the police, we hypothesize that, under certain circumstances, devices such as these could be used for the accelerated acquisition of fingerprint identification data with the potential for rapid near-patient identification in the future.

Using UHPLC and UV-vis Fingerprint Method to Evaluate Substitutes for Swertia mileensis: An Endangered Medicinal Plant.

Science.gov (United States)

Li, Jie; Zhang, Ji; Jin, Hang; Wang, Yuan-Zhong; Huang, Heng-Yu

2017-01-01

Millions of people are killed by viral hepatitis every year in the world, whereas many relevant medicines are too expensive to purchase. Swertia mileensis , a medicinal plant for hepatitis in the system of traditional Chinese medicine, has been vanishing gradually because of overexploitation. To find substitutes of S. mileensis and reduce the cost of purchasing drugs for hepatitis patients, the similarity of phytochemical constituents between S. mileensis and other three Swertia species was compared. Both ultra high performance liquid chromatographies and ultraviolet-vis fingerprints of four Swertia species were developed. Methanol extracts of the stems and leaves were used as samples to establish the fingerprint. The calibration curve was drawn for quantitative analysis of swertiamarin. The data of ultra high performance liquid chromatographies were evaluated statistically using similarity analysis and principal component analysis. The result shows a significant difference at area of 204-290 nm in the ultraviolet fingerprint. Swertiamarin, the only one common peak, was defined in chromatographic fingerprints of four Swertia species. The quantitative analysis suggested that the highest concentration of swertiamarin is in S. davidii . The similarity indexes between different samples were almost under 0.60. In the principal component analysis, separate points not only represent the distinction among different species, but also perform chemical discrepancies in content between stems and leaves of one same species. S. angustifolia , S. davidii , and S. punicea are not suitable as substitutes of S. mileensis because of their remarkable differences in entirety and local part. In order to address issues about substitutes and high cost of purchasing drugs, more studies need to undertake. The UHPLC fingerprint method indicated the significant difference on chemical ingredients in four plants from Swertia .Swertiamarin is the unique common compounds for four plants, which

A Computational Discriminability Analysis on Twin Fingerprints

Science.gov (United States)

Liu, Yu; Srihari, Sargur N.

Sharing similar genetic traits makes the investigation of twins an important study in forensics and biometrics. Fingerprints are one of the most commonly found types of forensic evidence. The similarity between twins’ prints is critical establish to the reliability of fingerprint identification. We present a quantitative analysis of the discriminability of twin fingerprints on a new data set (227 pairs of identical twins and fraternal twins) recently collected from a twin population using both level 1 and level 2 features. Although the patterns of minutiae among twins are more similar than in the general population, the similarity of fingerprints of twins is significantly different from that between genuine prints of the same finger. Twins fingerprints are discriminable with a 1.5%~1.7% higher EER than non-twins. And identical twins can be distinguished by examine fingerprint with a slightly higher error rate than fraternal twins.

Fingerprinting with Wow

Science.gov (United States)

Yu, Eugene; Craver, Scott

2006-02-01

Wow, or time warping caused by speed fluctuations in analog audio equipment, provides a wealth of applications in watermarking. Very subtle temporal distortion has been used to defeat watermarks, and as components in watermarking systems. In the image domain, the analogous warping of an image's canvas has been used both to defeat watermarks and also proposed to prevent collusion attacks on fingerprinting systems. In this paper, we explore how subliminal levels of wow can be used for steganography and fingerprinting. We present both a low-bitrate robust solution and a higher-bitrate solution intended for steganographic communication. As already observed, such a fingerprinting algorithm naturally discourages collusion by averaging, owing to flanging effects when misaligned audio is averaged. Another advantage of warping is that even when imperceptible, it can be beyond the reach of compression algorithms. We use this opportunity to debunk the common misconception that steganography is impossible under "perfect compression."

Tools for quality control of fingerprint databases

Science.gov (United States)

Swann, B. Scott; Libert, John M.; Lepley, Margaret A.

2010-04-01

Integrity of fingerprint data is essential to biometric and forensic applications. Accordingly, the FBI's Criminal Justice Information Services (CJIS) Division has sponsored development of software tools to facilitate quality control functions relative to maintaining its fingerprint data assets inherent to the Integrated Automated Fingerprint Identification System (IAFIS) and Next Generation Identification (NGI). This paper provides an introduction of two such tools. The first FBI-sponsored tool was developed by the National Institute of Standards and Technology (NIST) and examines and detects the spectral signature of the ridge-flow structure characteristic of friction ridge skin. The Spectral Image Validation/Verification (SIVV) utility differentiates fingerprints from non-fingerprints, including blank frames or segmentation failures erroneously included in data; provides a "first look" at image quality; and can identify anomalies in sample rates of scanned images. The SIVV utility might detect errors in individual 10-print fingerprints inaccurately segmented from the flat, multi-finger image acquired by one of the automated collection systems increasing in availability and usage. In such cases, the lost fingerprint can be recovered by re-segmentation from the now compressed multi-finger image record. The second FBI-sponsored tool, CropCoeff was developed by MITRE and thoroughly tested via NIST. CropCoeff enables cropping of the replacement single print directly from the compressed data file, thus avoiding decompression and recompression of images that might degrade fingerprint features necessary for matching.

Enhance Criminal Investigation by Proposed Fingerprint Recognition System

International Nuclear Information System (INIS)

Hashem, S.H.; Maolod, A.T.; Mohammad, A.A.

2014-01-01

Law enforcement officers and forensic specialists spend hours thinking about how fingerprints solve crimes, and trying to find, collect, record and compare these unique identifiers that can connect a specific person to a specific crime. These individuals understand that a basic human feature that most people take for granted, can be one of the most effective tools in crime solving.This research exploits our previous work to be applicable in criminal investigation field. The present study aims to solve the advance crime by strength fingerprint’s criminal investigation to control the alterations happen intentionally to criminals’ fingerprint. That done by suggest strategy introduce an optimal fingerprint image feature’s vector to the person and then considers it to be stored in database for future matching. Selecting optimal fingerprint feature’s vector strategy deal with considering 10 fingerprints for each criminal person (take the fingerprint in different time and different circumstance of criminal such as finger is dirty, wet, trembling, etc.). Proposal begun with apply a proposed enrollment on all 10 fingerprint for each criminal, the enrollment include the following consequence steps; begin with preprocessing step for each of 10 images including enhancement, then two level of feature extraction (first level to extract arches, whorls, and loops, where second level extract minutiae), after that applying proposed Genetic Algorithm to select optimal fingerprint, master fingerprint, which in our point of view present the most universal image which include more detailed features to recognition. Master fingerprint will be feature’s vector which stored in database. Then apply the proposed matching by testing fingerprints with these stored in database.While, measuring of criminal fingerprint investigation performance by calculating False Reject Rate (FRR)and False Accept Rate (FAR) for the traditional system and the proposed in criminal detection field. The

Chromatographic fingerprinting and free-radical scavenging activity of ethanol extracts of Muntingia calabura L. leaves and stems

Directory of Open Access Journals (Sweden)

William Patrick Cruiz Buhian

2017-02-01

Conclusions: M. calabura exhibited very high antioxidant activity in its leaves and stems ethanol extracts, both of which are used in traditional medicine. The TLC results demonstrated the presence of diverse secondary metabolites in the leaf and stem ethanol extracts, indicating that the antioxidant activity, including other bioactivities may be attributed to these phytochemical constituents. This paper has reported for the first time the TLC fingerprinting of M. calabura using visible light, UV 254 nm, UV 366 and post-derivatization with vanillin-spray to visualize separate spots on TLC plates.

Chromatographic fingerprinting as a strategy to identify regulated plants in illegal herbal supplements.

Science.gov (United States)

Custers, D; Van Praag, N; Courselle, P; Apers, S; Deconinck, E

2017-03-01

Erectile dysfunction (ED) is a sexual disorder characterized by the inability to achieve or maintain a sufficiently rigid erection. Despite the availability of non-invasive oral treatment options, many patients turn to herbal alternatives. Furthermore, herbal supplements are increasingly gaining popularity in industrialized countries and, as a consequence, quality control is a highly important issue. Unfortunately, this is not a simple task since plants are often crushed and mixed with other plants, which complicates their identification by usage of classical approaches such as microscopy. The aim of this study was to explore the potential use of chromatographic fingerprinting to identify plants present in herbal preparations intended for the treatment of ED. To achieve this goal, a HPLC-PDA and a HPLC-MS method were developed, using a full factorial experimental design in order to acquire characteristic fingerprints of three plants which are potentially beneficial for treating ED: Epimedium spp., Pausinystalia yohimbe and Tribulus terrestris. The full factorial design demonstrated that for all three plant references a C8 column (250mm×4.6mm; 5µm particle size) is best suited; methanol and an ammonium formate buffer (pH 3) were found to be the best constituents for the mobile phase. The suitability of this strategy was demonstrated by analysing several self-made triturations in three different botanical matrices, which mimic the influential effects that could be expected when analysing herbal supplements. To conclude, this study demonstrates that chromatographic fingerprinting could provide a useful means to identify plants in a complex herbal mixture. Copyright © 2016 Elsevier B.V. All rights reserved.

ORIENTATION FIELD RECONSTRUCTION OF ALTERED FINGERPRINT USING ORTHOGONAL WAVELETS

Directory of Open Access Journals (Sweden)

Mini M.G.

2016-11-01

Full Text Available Ridge orientation field is an important feature for fingerprint matching and fingerprint reconstruction. Matching of the altered fingerprint against its unaltered mates can be done by extracting the available features in the altered fingerprint and using it along with approximated ridge orientation. This paper presents a method for approximating ridge orientation field of altered fingerprints. In the proposed method, sine and cosine of doubled orientation of the fingerprint is decomposed using orthogonal wavelets and reconstructed back using only the approximation coefficients. No prior information about the singular points is needed for orientation approximation. The method is found suitable for orientation estimation of low quality fingerprint images also.

Three-dimensional imaging of artificial fingerprint by optical coherence tomography

Science.gov (United States)

Larin, Kirill V.; Cheng, Yezeng

2008-03-01

Fingerprint recognition is one of the popular used methods of biometrics. However, due to the surface topography limitation, fingerprint recognition scanners are easily been spoofed, e.g. using artificial fingerprint dummies. Thus, biometric fingerprint identification devices need to be more accurate and secure to deal with different fraudulent methods including dummy fingerprints. Previously, we demonstrated that Optical Coherence Tomography (OCT) images revealed the presence of the artificial fingerprints (made from different household materials, such as cement and liquid silicone rubber) at all times, while the artificial fingerprints easily spoofed the commercial fingerprint reader. Also we demonstrated that an analysis of the autocorrelation of the OCT images could be used in automatic recognition systems. Here, we exploited the three-dimensional (3D) imaging of the artificial fingerprint by OCT to generate vivid 3D image for both the artificial fingerprint layer and the real fingerprint layer beneath. With the reconstructed 3D image, it could not only point out whether there exists an artificial material, which is intended to spoof the scanner, above the real finger, but also could provide the hacker's fingerprint. The results of these studies suggested that Optical Coherence Tomography could be a powerful real-time noninvasive method for accurate identification of artificial fingerprints real fingerprints as well.

8 CFR 1236.5 - Fingerprints and photographs.

Science.gov (United States)

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Fingerprints and photographs. 1236.5... ORDERED REMOVED Detention of Aliens Prior to Order of Removal § 1236.5 Fingerprints and photographs. Every... photographed. Such fingerprints and photographs shall be made available to Federal, State, and local law...

Near-Optimal Fingerprinting with Constraints

Directory of Open Access Journals (Sweden)

Gulyás Gábor György

2016-10-01

Full Text Available Several recent studies have demonstrated that people show large behavioural uniqueness. This has serious privacy implications as most individuals become increasingly re-identifiable in large datasets or can be tracked, while they are browsing the web, using only a couple of their attributes, called as their fingerprints. Often, the success of these attacks depends on explicit constraints on the number of attributes learnable about individuals, i.e., the size of their fingerprints. These constraints can be budget as well as technical constraints imposed by the data holder. For instance, Apple restricts the number of applications that can be called by another application on iOS in order to mitigate the potential privacy threats of leaking the list of installed applications on a device. In this work, we address the problem of identifying the attributes (e.g., smartphone applications that can serve as a fingerprint of users given constraints on the size of the fingerprint. We give the best fingerprinting algorithms in general, and evaluate their effectiveness on several real-world datasets. Our results show that current privacy guards limiting the number of attributes that can be queried about individuals is insufficient to mitigate their potential privacy risks in many practical cases.

Microbial DNA fingerprinting of human fingerprints: dynamic colonization of fingertip microflora challenges human host inferences for forensic purposes.

Science.gov (United States)

Tims, Sebastian; van Wamel, Willem; Endtz, Hubert P; van Belkum, Alex; Kayser, Manfred

2010-09-01

Human fingertip microflora is transferred to touched objects and may provide forensically relevant information on individual hosts, such as on geographic origins, if endogenous microbial skin species/strains would be retrievable from physical fingerprints and would carry geographically restricted DNA diversity. We tested the suitability of physical fingerprints for revealing human host information, with geographic inference as example, via microbial DNA fingerprinting. We showed that the transient exogenous fingertip microflora is frequently different from the resident endogenous bacteria of the same individuals. In only 54% of the experiments, the DNA analysis of the transient fingertip microflora allowed the detection of defined, but often not the major, elements of the resident microflora. Although we found microbial persistency in certain individuals, time-wise variation of transient and resident microflora within individuals was also observed when resampling fingerprints after 3 weeks. While microbial species differed considerably in their frequency spectrum between fingerprint samples from volunteers in Europe and southern Asia, there was no clear geographic distinction between Staphylococcus strains in a cluster analysis, although bacterial genotypes did not overlap between both continental regions. Our results, though limited in quantity, clearly demonstrate that the dynamic fingerprint microflora challenges human host inferences for forensic purposes including geographic ones. Overall, our results suggest that human fingerprint microflora is too dynamic to allow for forensic marker developments for retrieving human information.

Attendance fingerprint identification system using arduino and single board computer

Science.gov (United States)

Muchtar, M. A.; Seniman; Arisandi, D.; Hasanah, S.

2018-03-01

Fingerprint is one of the most unique parts of the human body that distinguishes one person from others and is easily accessed. This uniqueness is supported by technology that can automatically identify or recognize a person called fingerprint sensor. Yet, the existing Fingerprint Sensor can only do fingerprint identification on one machine. For the mentioned reason, we need a method to be able to recognize each user in a different fingerprint sensor. The purpose of this research is to build fingerprint sensor system for fingerprint data management to be centralized so identification can be done in each Fingerprint Sensor. The result of this research shows that by using Arduino and Raspberry Pi, data processing can be centralized so that fingerprint identification can be done in each fingerprint sensor with 98.5 % success rate of centralized server recording.

Security and matching of partial fingerprint recognition systems

Science.gov (United States)

Jea, Tsai-Yang; Chavan, Viraj S.; Govindaraju, Venu; Schneider, John K.

2004-08-01

Despite advances in fingerprint identification techniques, matching incomplete or partial fingerprints still poses a difficult challenge. While the introduction of compact silicon chip-based sensors that capture only a part of the fingerprint area have made this problem important from a commercial perspective, there is also considerable interest on the topic for processing partial and latent fingerprints obtained at crime scenes. Attempts to match partial fingerprints using singular ridge structures-based alignment techniques fail when the partial print does not include such structures (e.g., core or delta). We present a multi-path fingerprint matching approach that utilizes localized secondary features derived using only the relative information of minutiae. Since the minutia-based fingerprint representation, is an ANSI-NIST standard, our approach has the advantage of being directly applicable to already existing databases. We also analyze the vulnerability of partial fingerprint identification systems to brute force attacks. The described matching approach has been tested on one of FVC2002"s DB1 database11. The experimental results show that our approach achieves an equal error rate of 1.25% and a total error rate of 1.8% (with FAR at 0.2% and FRR at 1.6%).

Forensic Chemistry: The Revelation of Latent Fingerprints

Science.gov (United States)

Friesen, J. Brent

2015-01-01

The visualization of latent fingerprints often involves the use of a chemical substance that creates a contrast between the fingerprint residues and the surface on which the print was deposited. The chemical-aided visualization techniques can be divided into two main categories: those that chemically react with the fingerprint residue and those…

FINGERPRINT DETECTION AND RECOGNIZATION TECHNIQUES USING GABOR FILTER

OpenAIRE

Yogita Verma*, Prof. Bhagwati Charan Patel

2017-01-01

Fingerprints are most extensively and effectively appropriate for the proof of identity in present days. Mostly because of their uniqueness among the people, public acceptance, originality, stability through life, and their least risk of invasion. Fingerprint technology, which is basically a biometric system, is utilized to identify an individual based on their physical qualities. Fingerprint matching is the trendiest biometric method appropriate to provide authentication. Fingerprint verific...

Interoperability between Fingerprint Biometric Systems: An Empirical Study

OpenAIRE

Gashi, I.; Mason, S.; Lugini, L.; Marasco, E.; Cukic, B.

2014-01-01

Fingerprints are likely the most widely used biometric in commercial as well as law enforcement applications. With the expected rapid growth of fingerprint authentication in mobile devices their importance justifies increased demands for dependability. An increasing number of new sensors,applications and a diverse user population also intensify concerns about the interoperability in fingerprint authentication. In most applications, fingerprints captured for user enrollment with one device may...

A medium resolution fingerprint matching system

Directory of Open Access Journals (Sweden)

Ayman Mohammad Bahaa-Eldin

2013-09-01

Full Text Available In this paper, a novel minutiae based fingerprint matching system is proposed. The system is suitable for medium resolution fingerprint images obtained by low cost commercial sensors. The paper presents a new thinning algorithm, a new features extraction and representation, and a novel feature distance matching algorithm. The proposed system is rotation and translation invariant and is suitable for complete or partial fingerprint matching. The proposed algorithms are optimized to be executed on low resource environments both in CPU power and memory space. The system was evaluated using a standard fingerprint dataset and good performance and accuracy were achieved under certain image quality requirements. In addition, the proposed system was compared favorably to that of the state of the art systems.

Information Theoretical Analysis of Identification based on Active Content Fingerprinting

OpenAIRE

Farhadzadeh, Farzad; Willems, Frans M. J.; Voloshinovskiy, Sviatoslav

2014-01-01

Content fingerprinting and digital watermarking are techniques that are used for content protection and distribution monitoring. Over the past few years, both techniques have been well studied and their shortcomings understood. Recently, a new content fingerprinting scheme called {\\em active content fingerprinting} was introduced to overcome these shortcomings. Active content fingerprinting aims to modify a content to extract robuster fingerprints than the conventional content fingerprinting....

Fingerprint matching with optical coherence tomography

CSIR Research Space (South Africa)

Moolla, Y

2015-12-01

Full Text Available Fingerprint recognition is an important security technique with a steadily growing usage for the identification and verification of individuals. However, current fingerprint acquisition systems have certain disadvantages, which include...

Sex Determination from Fingerprint Ridge Density | Gungadin ...

African Journals Online (AJOL)

This study was conducted with an aim to establish a relationship between sex and fingerprint ridge density. The fingerprints were taken from 500 subjects (250 males and 250 females) in the age group of 18-60 years. After taking fingerprints, the ridges were counted in the upper portion of the radial border of each print for all ...

Enhancing security of fingerprints through contextual biometric watermarking.

Science.gov (United States)

Noore, Afzel; Singh, Richa; Vatsa, Mayank; Houck, Max M

2007-07-04

This paper presents a novel digital watermarking technique using face and demographic text data as multiple watermarks for verifying the chain of custody and protecting the integrity of a fingerprint image. The watermarks are embedded in selected texture regions of a fingerprint image using discrete wavelet transform. Experimental results show that modifications in these locations are visually imperceptible and maintain the minutiae details. The integrity of the fingerprint image is verified through the high matching scores obtained from an automatic fingerprint identification system. There is also a high degree of visual correlation between the embedded images, and the extracted images from the watermarked fingerprint. The degree of similarity is computed using pixel-based metrics and human visual system metrics. The results also show that the proposed watermarked fingerprint and the extracted images are resilient to common attacks such as compression, filtering, and noise.

Implementation of Minutiae Based Fingerprint Identification System Using Crossing Number Concept

Directory of Open Access Journals (Sweden)

Atul S. CHAUDHARI

2014-01-01

Full Text Available Biometric system is essentially a pattern recognition system which recognizes a person by determining the authenticity of a specific physiological (e.g., fingerprints, face, retina, iris or behavioral (e.g., gait, signature characteristic possessed by that person. Among all the presently employed biometric techniques, fingerprint identification systems have received the most attention due to the long history of fingerprints and its extensive use in forensics. Fingerprint is reliable biometric characteristic as it is unique and persistence. Fingerprint is the pattern of ridges and valleys on the surface of fingertip. However, recognizing fingerprints in poor quality images is still a very complex job, so the fingerprint image must be preprocessed before matching. It is very difficult to extract fingerprint features directly from gray scale fingerprint image. In this paper we have proposed the system which uses minutiae based matching algorithm for fingerprint identification. There are three main phases in proposed algorithm. First phase enhance the input fingerprint image by preprocessing it. The enhanced fingerprint image is converted into thinned binary image and then minutiae are extracted by using Crossing Number Concept in second phase. Third stage compares input fingerprint image (after preprocessing and minutiae extraction with fingerprint images enrolled in database and makes decision whether the input fingerprint is matched with the fingerprint stored in database or not.

Application of acid-modified Imperata cylindrica powder for latent fingerprint development.

Science.gov (United States)

Low, Wei Zeng; Khoo, Bee Ee; Aziz, Zalina Binti Abdul; Low, Ling Wei; Teng, Tjoon Tow; bin Abdullah, Ahmad Fahmi Lim

2015-09-01

A novel powdering material that utilizes acid-modified Imperata cylindrica (IC) powder for the development of fingermarks was studied. Experiments were carried out to determine the suitability, adherence quality and sensitivity of the acid-modified IC powder. Fingermarks of different constituents (eccrine, sebaceous and natural fingermarks) on different types of surfaces were used. Acid-modified IC powder was also used to develop fingermarks of different ages as well as aged fingermarks recovered from the water. From the visual inspection, acid-modified IC powder was able to interact with different fingermark constituents and produced distinct ridge details on the examined surfaces. It was also able to develop aged fingermarks and fingermarks that were submerged in water. A statistical comparison was made against the Sirchie® Hi-Fi black powder in terms of the powders' sensitivity and quality of the developed natural fingermarks. The image quality was analyzed using MITRE's Image Quality of Fingerprint (IQF) software. From the experiments, acid-modified IC powder has the potential as a fingermark development powder, although natural fingermarks developed by Sirchie® black powder showed better quality and sensitivity based on the results of the statistical comparison. Copyright © 2015 The Chartered Society of Forensic Sciences. Published by Elsevier Ireland Ltd. All rights reserved.

An Efficient Reconfigurable Architecture for Fingerprint Recognition

Directory of Open Access Journals (Sweden)

Satish S. Bhairannawar

2016-01-01

Full Text Available The fingerprint identification is an efficient biometric technique to authenticate human beings in real-time Big Data Analytics. In this paper, we propose an efficient Finite State Machine (FSM based reconfigurable architecture for fingerprint recognition. The fingerprint image is resized, and Compound Linear Binary Pattern (CLBP is applied on fingerprint, followed by histogram to obtain histogram CLBP features. Discrete Wavelet Transform (DWT Level 2 features are obtained by the same methodology. The novel matching score of CLBP is computed using histogram CLBP features of test image and fingerprint images in the database. Similarly, the DWT matching score is computed using DWT features of test image and fingerprint images in the database. Further, the matching scores of CLBP and DWT are fused with arithmetic equation using improvement factor. The performance parameters such as TSR (Total Success Rate, FAR (False Acceptance Rate, and FRR (False Rejection Rate are computed using fusion scores with correlation matching technique for FVC2004 DB3 Database. The proposed fusion based VLSI architecture is synthesized on Virtex xc5vlx30T-3 FPGA board using Finite State Machine resulting in optimized parameters.

PLS-Prediction and Confirmation of Hydrojuglone Glucoside as the Antitrypanosomal Constituent of Juglans Spp.

Directory of Open Access Journals (Sweden)

Therese Ellendorff

2015-05-01

Full Text Available Naphthoquinones (NQs occur naturally in a large variety of plants. Several NQs are highly active against protozoans, amongst them the causative pathogens of neglected tropical diseases such as human African trypanosomiasis (sleeping sickness, Chagas disease and leishmaniasis. Prominent NQ-producing plants can be found among Juglans spp. (Juglandaceae with juglone derivatives as known constituents. In this study, 36 highly variable extracts were prepared from different plant parts of J. regia, J. cinerea and J. nigra. For all extracts, antiprotozoal activity was determined against the protozoans Trypanosoma cruzi, T. brucei rhodesiense and Leishmania donovani. In addition, an LC-MS fingerprint was recorded for each extract. With each extract’s fingerprint and the data on in vitro growth inhibitory activity against T. brucei rhodesiense a Partial Least Squares (PLS regression model was calculated in order to obtain an indication of compounds responsible for the differences in bioactivity between the 36 extracts. By means of PLS, hydrojuglone glucoside was predicted as an active compound against T. brucei and consequently isolated and tested in vitro. In fact, the pure compound showed activity against T. brucei at a significantly lower cytotoxicity towards mammalian cells than established antiprotozoal NQs such as lapachol.

Fingerprint and Face Identification for Large User Population

Directory of Open Access Journals (Sweden)

Teddy Ko

2003-06-01

Full Text Available The main objective of this paper is to present the state-of-the-art of the current biometric (fingerprint and face technology, lessons learned during the investigative analysis performed to ascertain the benefits of using combined fingerprint and facial technologies, and recommendations for the use of current available fingerprint and face identification technologies for optimum identification performance for applications using large user population. Prior fingerprint and face identification test study results have shown that their identification accuracies are strongly dependent on the image quality of the biometric inputs. Recommended methodologies for ensuring the capture of acceptable quality fingerprint and facial images of subjects are also presented in this paper.

Fingerprint: A Unique and Reliable Method for Identification

Directory of Open Access Journals (Sweden)

Palash Kumar Bose

2017-01-01

Full Text Available Fingerprints have been the gold standard for personal identification within the forensic community for more than one hundred years. It is still universal in spite of discovery of DNA fingerprint. The science of fingerprint identification has evolved over time from the early use of finger prints to mark business transactions in ancient Babylonia to their use today as core technology in biometric security devices and as scientific evidence in courts of law throughout the world. The science of fingerprints, dactylography or dermatoglyphics, had long been widely accepted, and well acclaimed and reputed as panacea for individualization, particularly in forensic investigations. Human fingerprints are detailed, unique, difficult to alter, and durable over the life of an individual, making them suitable as lifelong markers of human identity. Fingerprints can be readily used by police or other authorities to identify individuals who wish to conceal their identity, or to identify people who are incapacitated or deceased, as in the aftermath of a natural disaster

OPTIMAL EXPERIMENT DESIGN FOR MAGNETIC RESONANCE FINGERPRINTING

OpenAIRE

Zhao, Bo; Haldar, Justin P.; Setsompop, Kawin; Wald, Lawrence L.

2016-01-01

Magnetic resonance (MR) fingerprinting is an emerging quantitative MR imaging technique that simultaneously acquires multiple tissue parameters in an efficient experiment. In this work, we present an estimation-theoretic framework to evaluate and design MR fingerprinting experiments. More specifically, we derive the Cram��r-Rao bound (CRB), a lower bound on the covariance of any unbiased estimator, to characterize parameter estimation for MR fingerprinting. We then formulate an optimal experi...

Image Processing and Features Extraction of Fingerprint Images ...

African Journals Online (AJOL)

To demonstrate the importance of the image processing of fingerprint images prior to image enrolment or comparison, the set of fingerprint images in databases (a) and (b) of the FVC (Fingerprint Verification Competition) 2000 database were analyzed using a features extraction algorithm. This paper presents the results of ...

FINGERPRINT MATCHING BASED ON PORE CENTROIDS

Directory of Open Access Journals (Sweden)

S. Malathi

2011-05-01

Full Text Available In recent years there has been exponential growth in the use of bio- metrics for user authentication applications. Automated Fingerprint Identification systems have become popular tool in many security and law enforcement applications. Most of these systems rely on minutiae (ridge ending and bifurcation features. With the advancement in sensor technology, high resolution fingerprint images (1000 dpi pro- vide micro level of features (pores that have proven to be useful fea- tures for identification. In this paper, we propose a new strategy for fingerprint matching based on pores by reliably extracting the pore features The extraction of pores is done by Marker Controlled Wa- tershed segmentation method and the centroids of each pore are con- sidered as feature vectors for matching of two fingerprint images. Experimental results shows that the proposed method has better per- formance with lower false rates and higher accuracy.

Screening bioactive quality control markers of QiShenYiQi dripping pills based on the relationship between the ultra-high performance liquid chromatography fingerprint and vascular protective activity.

Science.gov (United States)

Zhuo, Limeng; Peng, Jingjing; Zhao, Yunli; Li, Dongxiang; Xie, Xiuman; Tong, Ling; Yu, Zhiguo

2017-10-01

Traditional Chinese medicine consists of complex phytochemical constituents. Selecting appropriate analytical markers of traditional Chinese medicine is a critical step in quality control. Currently, the combination of fingerprinting and efficacy evaluation is considered as a useful method for screening active ingredients in complex mixtures. This study was designed to develop an orthogonal partial least squares model for screening bioactive quality control markers of QishenYiqi dripping pills based on the fingerprint-efficacy relationship. First, the chemical fingerprints of 49 batches of QishenYiqi dripping pill samples were established by ultra-high performance liquid chromatography coupled with a photodiode array detector. Second, ultra-high performance liquid chromatography coupled with quadrupole-time-of-flight mass spectrometry was exploited to systematically investigate the 36 copossessing fingerprint components in QishenYiqi dripping pills. The vascular protective activity of QishenYiqi dripping pills was determined by using a cell counting kit-8 assay. Finally, fingerprint-efficacy relationship was established by orthogonal partial least squares model. The results indicated that ten components exhibited strong correlation with vascular protective activity, and these were preliminarily screened as quality control markers. The present study provided a novel idea for the study of the pharmacodynamic material basis and quality evaluation of QishenYiqi dripping pills. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Method for modeling post-mortem biometric 3D fingerprints

Science.gov (United States)

Rajeev, Srijith; Shreyas, Kamath K. M.; Agaian, Sos S.

2016-05-01

Despite the advancements of fingerprint recognition in 2-D and 3-D domain, authenticating deformed/post-mortem fingerprints continue to be an important challenge. Prior cleansing and reconditioning of the deceased finger is required before acquisition of the fingerprint. The victim's finger needs to be precisely and carefully operated by a medium to record the fingerprint impression. This process may damage the structure of the finger, which subsequently leads to higher false rejection rates. This paper proposes a non-invasive method to perform 3-D deformed/post-mortem finger modeling, which produces a 2-D rolled equivalent fingerprint for automated verification. The presented novel modeling method involves masking, filtering, and unrolling. Computer simulations were conducted on finger models with different depth variations obtained from Flashscan3D LLC. Results illustrate that the modeling scheme provides a viable 2-D fingerprint of deformed models for automated verification. The quality and adaptability of the obtained unrolled 2-D fingerprints were analyzed using NIST fingerprint software. Eventually, the presented method could be extended to other biometric traits such as palm, foot, tongue etc. for security and administrative applications.

Antioxidant Constituents of Cotoneaster melanocarpus Lodd.

Directory of Open Access Journals (Sweden)

Adelheid H. Brantner

2013-10-01

Full Text Available The aim of this study was the evaluation of the antioxidant capacity of Cotoneaster melanocarpus Lodd. and the identification of antioxidant active constituents of this plant. C. melanocarpus Lodd. is a shrub indigenous to Mongolia and used in Traditional Mongolian Medicine as a styptic. Before extraction, the plant material was separated into three parts: young sterile shoots, older stems and leaves. All these parts were extracted with water, methanol, ethyl acetate, dichloromethane and hexane, successively. The methanolic extract of the sterile shoots showed the highest antioxidant activity in the DPPH (2,2-diphenyl-1-picrylhydrazyl radical scavenging assay (IC50 30.91 ± 2.97 µg/mL. This active extract was further analyzed with chromatographic methods. TLC fingerprinting and HPLC indicated the presence of the flavonol glycosides quercetin-3-O-rutinoside (rutin, quercetin-3-O-galactoside (hyperoside and quercetin-3-O-glucoside (isoquercetin, ursolic acid as well as chlorogenic acid, neochlorogenic acid and cryptochlorogenic acid. The findings were substantiated with LC-MS. All identified compounds have antioxidant properties and therefore contribute to the radical scavenging activity of the whole plant.

Fingerprint enhancement using a multispectral sensor

Science.gov (United States)

Rowe, Robert K.; Nixon, Kristin A.

2005-03-01

The level of performance of a biometric fingerprint sensor is critically dependent on the quality of the fingerprint images. One of the most common types of optical fingerprint sensors relies on the phenomenon of total internal reflectance (TIR) to generate an image. Under ideal conditions, a TIR fingerprint sensor can produce high-contrast fingerprint images with excellent feature definition. However, images produced by the same sensor under conditions that include dry skin, dirt on the skin, and marginal contact between the finger and the sensor, are likely to be severely degraded. This paper discusses the use of multispectral sensing as a means to collect additional images with new information about the fingerprint that can significantly augment the system performance under both normal and adverse sample conditions. In the context of this paper, "multispectral sensing" is used to broadly denote a collection of images taken under different illumination conditions: different polarizations, different illumination/detection configurations, as well as different wavelength illumination. Results from three small studies using an early-stage prototype of the multispectral-TIR (MTIR) sensor are presented along with results from the corresponding TIR data. The first experiment produced data from 9 people, 4 fingers from each person and 3 measurements per finger under "normal" conditions. The second experiment provided results from a study performed to test the relative performance of TIR and MTIR images when taken under extreme dry and dirty conditions. The third experiment examined the case where the area of contact between the finger and sensor is greatly reduced.

Combining pharmacophore fingerprints and PLS-discriminant analysis for virtual screening and SAR elucidation

DEFF Research Database (Denmark)

Askjær, Sune; Langgård, Morten

2008-01-01

The criterion of success for the initial stages of a ligand-based drug-discovery project is dual. First, a set of suitable lead compounds has to be identified. Second, a level of a preliminary structure-activity relationship (SAR) of the identified ligands has to be established in order to guide ...... by the protein-binding site known from X-ray complexes. The result of this analysis assists in explaining the efficiency of 2D pharmacophore fingerprints as descriptors in virtual screening....... the lead optimization toward a final drug candidate. This paper presents a combined approach to solving these two problems of ligand-based virtual screening and elucidation of SAR based on interplay between pharmacophore fingerprints and interpretation of PLS-discriminant analysis (PLS-DA) models....... The virtual screening capability of the PLS-DA method is compared to group fusion maximum similarity searching in a test using four graph-based pharmacophore fingerprints over a range of 10 diverse targets. The PLS-DA method was generally found to do better than the Smax method. The GpiDAPH3 and PCH...

Towards reconstruction of overlapping fingerprints using plasma spectroscopy

Science.gov (United States)

Yang, Jun-Ho; Choi, Soo-Jin; Yoh, Jack J.

2017-08-01

Chemical analysis is commonly used in the field of forensic science where the precise discrimination of primary evidence is of significant importance. Laser-Induced Breakdown Spectroscopy (LIBS) exceeds other spectroscopic methods in terms of the time required for pre- and post-sample preparation, the insensitivity to sample phase state be it solid, liquid, or gas, and the detection of two-dimensional spectral mapping from real time point measurements. In this research, fingerprint samples on various surface materials are considered in the chemical detection and reconstruction of fingerprints using the two-dimensional LIBS technique. Strong and distinct intensities of specific wavelengths represent visible ink, natural secretion of sweat, and contaminants from the environment, all of which can be present in latent fingerprints. The particular aim of the work presented here is to enhance the precision of the two-dimensional recreation of the fingerprints present on metal, plastic, and artificially prepared soil surface using LIBS with principal component analysis. By applying a distinct wavelength discrimination for two overlapping fingerprint samples, separation into two non-identical chemical fingerprints was successfully performed.

Cancelable remote quantum fingerprint templates protection scheme

International Nuclear Information System (INIS)

Liao Qin; Guo Ying; Huang Duan

2017-01-01

With the increasing popularity of fingerprint identification technology, its security and privacy have been paid much attention. Only the security and privacy of biological information are insured, the biological technology can be better accepted and used by the public. In this paper, we propose a novel quantum bit (qbit)-based scheme to solve the security and privacy problem existing in the traditional fingerprint identification system. By exploiting the properties of quantm mechanics, our proposed scheme, cancelable remote quantum fingerprint templates protection scheme, can achieve the unconditional security guaranteed in an information-theoretical sense. Moreover, this novel quantum scheme can invalidate most of the attacks aimed at the fingerprint identification system. In addition, the proposed scheme is applicable to the requirement of remote communication with no need to worry about its security and privacy during the transmission. This is an absolute advantage when comparing with other traditional methods. Security analysis shows that the proposed scheme can effectively ensure the communication security and the privacy of users’ information for the fingerprint identification. (paper)

Impact of Finger Type in Fingerprint Authentication

Science.gov (United States)

Gafurov, Davrondzhon; Bours, Patrick; Yang, Bian; Busch, Christoph

Nowadays fingerprint verification system is the most widespread and accepted biometric technology that explores various features of the human fingers for this purpose. In general, every normal person has 10 fingers with different size. Although it is claimed that recognition performance with little fingers can be less accurate compared to other finger types, to our best knowledge, this has not been investigated yet. This paper presents our study on the topic of influence of the finger type into fingerprint recognition performance. For analysis we employ two fingerprint verification software packages (one public and one commercial). We conduct test on GUC100 multi sensor fingerprint database which contains fingerprint images of all 10 fingers from 100 subjects. Our analysis indeed confirms that performance with small fingers is less accurate than performance with the others fingers of the hand. It also appears that best performance is being obtained with thumb or index fingers. For example, performance deterioration from the best finger (i.e. index or thumb) to the worst fingers (i.e. small ones) can be in the range of 184%-1352%.

Distributed construction of quantum fingerprints

OpenAIRE

Ambainis, Andris; Shi, Yaoyun

2003-01-01

Quantum fingerprints are useful quantum encodings introduced by Buhrman, Cleve, Watrous, and de Wolf (Physical Review Letters, Volume 87, Number 16, Article 167902, 2001; quant-ph/0102001) in obtaining an efficient quantum communication protocol. We design a protocol for constructing the fingerprint in a distributed scenario. As an application, this protocol gives rise to a communication protocol more efficient than the best known classical protocol for a communication problem.

Secure fingerprint identification based on structural and microangiographic optical coherence tomography.

Science.gov (United States)

Liu, Xuan; Zaki, Farzana; Wang, Yahui; Huang, Qiongdan; Mei, Xin; Wang, Jiangjun

2017-03-10

Optical coherence tomography (OCT) allows noncontact acquisition of fingerprints and hence is a highly promising technology in the field of biometrics. OCT can be used to acquire both structural and microangiographic images of fingerprints. Microangiographic OCT derives its contrast from the blood flow in the vasculature of viable skin tissue, and microangiographic fingerprint imaging is inherently immune to fake fingerprint attack. Therefore, dual-modality (structural and microangiographic) OCT imaging of fingerprints will enable more secure acquisition of biometric data, which has not been investigated before. Our study on fingerprint identification based on structural and microangiographic OCT imaging is, we believe, highly innovative. In this study, we performed OCT imaging study for fingerprint acquisition, and demonstrated the capability of dual-modality OCT imaging for the identification of fake fingerprints.

Study of noninvasive detection of latent fingerprints using UV laser

Science.gov (United States)

Li, Hong-xia; Cao, Jing; Niu, Jie-qing; Huang, Yun-gang; Mao, Lin-jie; Chen, Jing-rong

2011-06-01

Latent fingerprints present a considerable challenge in forensics, and noninvasive procedure that captures a digital image of the latent fingerprints is significant in the field of criminal investigation. The capability of photography technologies using 266nm UV Nd:YAG solid state laser as excitation light source to provide detailed images of unprocessed latent fingerprints is demonstrated. Unprocessed latent fingerprints were developed on various non-absorbent and absorbing substrates. According to the special absorption, reflection, scattering and fluorescence characterization of the various residues in fingerprints (fatty acid ester, protein, and carbosylic acid salts etc) to the UV light to weaken or eliminate the background disturbance and increase the brightness contrast of fingerprints with the background, and using 266nm UV laser as excitation light source, fresh and old latent fingerprints on the surface of four types of non-absorbent objects as magazine cover, glass, back of cellphone, wood desktop paintwork and two types of absorbing objects as manila envelope, notebook paper were noninvasive detected and appeared through reflection photography and fluorescence photography technologies, and the results meet the fingerprint identification requirements in forensic science.

Holistic processing of fingerprints by expert forensic examiners.

Science.gov (United States)

Vogelsang, Macgregor D; Palmeri, Thomas J; Busey, Thomas A

2017-01-01

Holistic processing is often characterized as a process by which objects are perceived as a whole rather than a compilation of individual features. This mechanism may play an important role in the development of perceptual expertise because it allows for rapid integration across image regions. The present work explores whether holistic processing is present in latent fingerprint examiners, who compare fingerprints collected from crime scenes against a set of standards taken from a suspect. We adapted a composite task widely used in the face recognition and perceptual expertise literatures, in which participants were asked to match only a particular half of a fingerprint with a previous image while ignoring the other half. We tested both experts and novices, using both upright and inverted fingerprints. For upright fingerprints, we found weak evidence for holistic processing, but with no differences between experts and novices with respect to holistic processing. For inverted fingerprints, we found stronger evidence of holistic processing, with weak evidence for differences between experts and novices. These relatively weak holistic processing effects contrast with robust evidence for holistic processing with faces and with objects in other domains of perceptual expertise. The data constrain models of holistic processing by demonstrating that latent fingerprint experts and novices may not substantively differ in terms of the amount of holistic processing and that inverted stimuli actually produced more evidence for holistic processing than upright stimuli. Important differences between the present fingerprint stimuli and those in the literature include the lack of verbal labels for experts and the absence of strong vertical asymmetries, both of which might contribute to stronger holistic processing signatures in other stimulus domains.

Cognitive Fingerprints

Science.gov (United States)

2015-03-25

is another cognitive fingerprint that has been used extensively for authorship . This work has been ex- tended to authentication by relating keyboard...this work is the inference of high-level features such as personality, gender , and dominant hand but those features have not been integrated to date

DNA fingerprinting in botany: past, present, future.

Science.gov (United States)

Nybom, Hilde; Weising, Kurt; Rotter, Björn

2014-01-03

Almost three decades ago Alec Jeffreys published his seminal Nature papers on the use of minisatellite probes for DNA fingerprinting of humans (Jeffreys and colleagues Nature 1985, 314:67-73 and Nature 1985, 316:76-79). The new technology was soon adopted for many other organisms including plants, and when Hilde Nybom, Kurt Weising and Alec Jeffreys first met at the very First International Conference on DNA Fingerprinting in Berne, Switzerland, in 1990, everybody was enthusiastic about the novel method that allowed us for the first time to discriminate between humans, animals, plants and fungi on the individual level using DNA markers. A newsletter coined "Fingerprint News" was launched, T-shirts were sold, and the proceedings of the Berne conference filled a first book on "DNA fingerprinting: approaches and applications". Four more conferences were about to follow, one on each continent, and Alec Jeffreys of course was invited to all of them. Since these early days, methodologies have undergone a rapid evolution and diversification. A multitude of techniques have been developed, optimized, and eventually abandoned when novel and more efficient and/or more reliable methods appeared. Despite some overlap between the lifetimes of the different technologies, three phases can be defined that coincide with major technological advances. Whereas the first phase of DNA fingerprinting ("the past") was dominated by restriction fragment analysis in conjunction with Southern blot hybridization, the advent of the PCR in the late 1980s gave way to the development of PCR-based single- or multi-locus profiling techniques in the second phase. Given that many routine applications of plant DNA fingerprinting still rely on PCR-based markers, we here refer to these methods as "DNA fingerprinting in the present", and include numerous examples in the present review. The beginning of the third phase actually dates back to 2005, when several novel, highly parallel DNA sequencing

Privacy protection schemes for fingerprint recognition systems

Science.gov (United States)

Marasco, Emanuela; Cukic, Bojan

2015-05-01

The deployment of fingerprint recognition systems has always raised concerns related to personal privacy. A fingerprint is permanently associated with an individual and, generally, it cannot be reset if compromised in one application. Given that fingerprints are not a secret, potential misuses besides personal recognition represent privacy threats and may lead to public distrust. Privacy mechanisms control access to personal information and limit the likelihood of intrusions. In this paper, image- and feature-level schemes for privacy protection in fingerprint recognition systems are reviewed. Storing only key features of a biometric signature can reduce the likelihood of biometric data being used for unintended purposes. In biometric cryptosystems and biometric-based key release, the biometric component verifies the identity of the user, while the cryptographic key protects the communication channel. Transformation-based approaches only a transformed version of the original biometric signature is stored. Different applications can use different transforms. Matching is performed in the transformed domain which enable the preservation of low error rates. Since such templates do not reveal information about individuals, they are referred to as cancelable templates. A compromised template can be re-issued using a different transform. At image-level, de-identification schemes can remove identifiers disclosed for objectives unrelated to the original purpose, while permitting other authorized uses of personal information. Fingerprint images can be de-identified by, for example, mixing fingerprints or removing gender signature. In both cases, degradation of matching performance is minimized.

A novel interaction fingerprint derived from per atom score contributions: exhaustive evaluation of interaction fingerprint performance in docking based virtual screening.

Science.gov (United States)

Jasper, Julia B; Humbeck, Lina; Brinkjost, Tobias; Koch, Oliver

2018-03-16

Protein ligand interaction fingerprints are a powerful approach for the analysis and assessment of docking poses to improve docking performance in virtual screening. In this study, a novel interaction fingerprint approach (PADIF, protein per atom score contributions derived interaction fingerprint) is presented which was specifically designed for utilising the GOLD scoring functions' atom contributions together with a specific scoring scheme. This allows the incorporation of known protein-ligand complex structures for a target-specific scoring. Unlike many other methods, this approach uses weighting factors reflecting the relative frequency of a specific interaction in the references and penalizes destabilizing interactions. In addition, and for the first time, an exhaustive validation study was performed that assesses the performance of PADIF and two other interaction fingerprints in virtual screening. Here, PADIF shows superior results, and some rules of thumb for a successful use of interaction fingerprints could be identified.

Mass spectrometry-based metabolomic fingerprinting for screening cold tolerance in Arabidopsis thaliana accessions

Czech Academy of Sciences Publication Activity Database

Václavík, L.; Mishra, Anamika; Mishra, Kumud; Hajslova, J.

2013-01-01

Roč. 405, č. 8 (2013), s. 2671-2683 ISSN 1618-2642 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0073; GA MŠk OC08055 Institutional support: RVO:67179843 Keywords : cold tolerance * Arabidopsis thaliana * metabolomic fingerprinting * LC-MS * DART-MS * chemometric analysis Subject RIV: EH - Ecology, Behaviour Impact factor: 3.578, year: 2013

Optimal experiment design for magnetic resonance fingerprinting.

Science.gov (United States)

Bo Zhao; Haldar, Justin P; Setsompop, Kawin; Wald, Lawrence L

2016-08-01

Magnetic resonance (MR) fingerprinting is an emerging quantitative MR imaging technique that simultaneously acquires multiple tissue parameters in an efficient experiment. In this work, we present an estimation-theoretic framework to evaluate and design MR fingerprinting experiments. More specifically, we derive the Cramér-Rao bound (CRB), a lower bound on the covariance of any unbiased estimator, to characterize parameter estimation for MR fingerprinting. We then formulate an optimal experiment design problem based on the CRB to choose a set of acquisition parameters (e.g., flip angles and/or repetition times) that maximizes the signal-to-noise ratio efficiency of the resulting experiment. The utility of the proposed approach is validated by numerical studies. Representative results demonstrate that the optimized experiments allow for substantial reduction in the length of an MR fingerprinting acquisition, and substantial improvement in parameter estimation performance.

A fingerprint key binding algorithm based on vector quantization and error correction

Science.gov (United States)

Li, Liang; Wang, Qian; Lv, Ke; He, Ning

2012-04-01

In recent years, researches on seamless combination cryptosystem with biometric technologies, e.g. fingerprint recognition, are conducted by many researchers. In this paper, we propose a binding algorithm of fingerprint template and cryptographic key to protect and access the key by fingerprint verification. In order to avoid the intrinsic fuzziness of variant fingerprints, vector quantization and error correction technique are introduced to transform fingerprint template and then bind with key, after a process of fingerprint registration and extracting global ridge pattern of fingerprint. The key itself is secure because only hash value is stored and it is released only when fingerprint verification succeeds. Experimental results demonstrate the effectiveness of our ideas.

Missing data reconstruction using Gaussian mixture models for fingerprint images

Science.gov (United States)

Agaian, Sos S.; Yeole, Rushikesh D.; Rao, Shishir P.; Mulawka, Marzena; Troy, Mike; Reinecke, Gary

2016-05-01

Publisher's Note: This paper, originally published on 25 May 2016, was replaced with a revised version on 16 June 2016. If you downloaded the original PDF, but are unable to access the revision, please contact SPIE Digital Library Customer Service for assistance. One of the most important areas in biometrics is matching partial fingerprints in fingerprint databases. Recently, significant progress has been made in designing fingerprint identification systems for missing fingerprint information. However, a dependable reconstruction of fingerprint images still remains challenging due to the complexity and the ill-posed nature of the problem. In this article, both binary and gray-level images are reconstructed. This paper also presents a new similarity score to evaluate the performance of the reconstructed binary image. The offered fingerprint image identification system can be automated and extended to numerous other security applications such as postmortem fingerprints, forensic science, investigations, artificial intelligence, robotics, all-access control, and financial security, as well as for the verification of firearm purchasers, driver license applicants, etc.

Uniqueness: skews bit occurrence frequencies in randomly generated fingerprint libraries.

Science.gov (United States)

Chen, Nelson G

2016-08-01

Requiring that randomly generated chemical fingerprint libraries have unique fingerprints such that no two fingerprints are identical causes a systematic skew in bit occurrence frequencies, the proportion at which specified bits are set. Observed frequencies (O) at which each bit is set within the resulting libraries systematically differ from frequencies at which bits are set at fingerprint generation (E). Observed frequencies systematically skew toward 0.5, with the effect being more pronounced as library size approaches the compound space, which is the total number of unique possible fingerprints given the number of bit positions each fingerprint contains. The effect is quantified for varying library sizes as a fraction of the overall compound space, and for changes in the specified frequency E. The cause and implications for this systematic skew are subsequently discussed. When generating random libraries of chemical fingerprints, the imposition of a uniqueness requirement should either be avoided or taken into account.

Fingerprint recognition system by use of graph matching

Science.gov (United States)

Shen, Wei; Shen, Jun; Zheng, Huicheng

2001-09-01

Fingerprint recognition is an important subject in biometrics to identify or verify persons by physiological characteristics, and has found wide applications in different domains. In the present paper, we present a finger recognition system that combines singular points and structures. The principal steps of processing in our system are: preprocessing and ridge segmentation, singular point extraction and selection, graph representation, and finger recognition by graphs matching. Our fingerprint recognition system is implemented and tested for many fingerprint images and the experimental result are satisfactory. Different techniques are used in our system, such as fast calculation of orientation field, local fuzzy dynamical thresholding, algebraic analysis of connections and fingerprints representation and matching by graphs. Wed find that for fingerprint database that is not very large, the recognition rate is very high even without using a prior coarse category classification. This system works well for both one-to-few and one-to-many problems.

Utilizing AFIS searching tools to reduce errors in fingerprint casework.

Science.gov (United States)

Langenburg, Glenn; Hall, Carey; Rosemarie, Quincy

2015-12-01

Fifty-six (56) adjudicated, property crime cases involving fingerprint evidence were reviewed using a case-specific AFIS database tool. This tool allowed fingerprint experts to search latent prints in the cases against a database of friction ridge exemplars limited to only the individuals specific to that particular case. We utilized three different methods to encode and search the latent prints: automatic feature extraction, manual encoding performed by a student intern, and manual encoding performed by a fingerprint expert. Performance in the study was strongest when the encoding was conducted by the fingerprint expert. The results of the study showed that while the AFIS tools failed to locate all of the identifications originally reported by the initial fingerprint expert that worked the case, the AFIS tools helped to identify 7 additional latent prints that were not reported by the initial fingerprint expert. We conclude that this technology, when combined with fingerprint expertise, will reduce the number of instances where an erroneous exclusion could occur, increase the efficiency of a fingerprint unit, and be a useful tool for reviewing active or cold cases for missed opportunities to report identifications. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

On the introduction of secondary fingerprint classification

CSIR Research Space (South Africa)

Msiza, IS

2011-07-01

Full Text Available The concept of fingerprint classification is an important one because of the need to, before executing a database search procedure, virtually break the fingerprint template database into smaller, manageable partitions. This is done in order to avoid...

Snake Model Based on Improved Genetic Algorithm in Fingerprint Image Segmentation

Directory of Open Access Journals (Sweden)

Mingying Zhang

2016-12-01

Full Text Available Automatic fingerprint identification technology is a quite mature research field in biometric identification technology. As the preprocessing step in fingerprint identification, fingerprint segmentation can improve the accuracy of fingerprint feature extraction, and also reduce the time of fingerprint preprocessing, which has a great significance in improving the performance of the whole system. Based on the analysis of the commonly used methods of fingerprint segmentation, the existing segmentation algorithm is improved in this paper. The snake model is used to segment the fingerprint image. Additionally, it is improved by using the global optimization of the improved genetic algorithm. Experimental results show that the algorithm has obvious advantages both in the speed of image segmentation and in the segmentation effect.

Artificial fingerprint recognition by using optical coherence tomography with autocorrelation analysis

Science.gov (United States)

Cheng, Yezeng; Larin, Kirill V.

2006-12-01

Fingerprint recognition is one of the most widely used methods of biometrics. This method relies on the surface topography of a finger and, thus, is potentially vulnerable for spoofing by artificial dummies with embedded fingerprints. In this study, we applied the optical coherence tomography (OCT) technique to distinguish artificial materials commonly used for spoofing fingerprint scanning systems from the real skin. Several artificial fingerprint dummies made from household cement and liquid silicone rubber were prepared and tested using a commercial fingerprint reader and an OCT system. While the artificial fingerprints easily spoofed the commercial fingerprint reader, OCT images revealed the presence of them at all times. We also demonstrated that an autocorrelation analysis of the OCT images could be potentially used in automatic recognition systems.

A fingerprint classification algorithm based on combination of local and global information

Science.gov (United States)

Liu, Chongjin; Fu, Xiang; Bian, Junjie; Feng, Jufu

2011-12-01

Fingerprint recognition is one of the most important technologies in biometric identification and has been wildly applied in commercial and forensic areas. Fingerprint classification, as the fundamental procedure in fingerprint recognition, can sharply decrease the quantity for fingerprint matching and improve the efficiency of fingerprint recognition. Most fingerprint classification algorithms are based on the number and position of singular points. Because the singular points detecting method only considers the local information commonly, the classification algorithms are sensitive to noise. In this paper, we propose a novel fingerprint classification algorithm combining the local and global information of fingerprint. Firstly we use local information to detect singular points and measure their quality considering orientation structure and image texture in adjacent areas. Furthermore the global orientation model is adopted to measure the reliability of singular points group. Finally the local quality and global reliability is weighted to classify fingerprint. Experiments demonstrate the accuracy and effectivity of our algorithm especially for the poor quality fingerprint images.

Efficient Filtering of Noisy Fingerprint Images

Directory of Open Access Journals (Sweden)

Maria Liliana Costin

2016-01-01

Full Text Available Fingerprint identification is an important field in the wide domain of biometrics with many applications, in different areas such: judicial, mobile phones, access systems, airports. There are many elaborated algorithms for fingerprint identification, but none of them can guarantee that the results of identification are always 100 % accurate. A first step in a fingerprint image analysing process consists in the pre-processing or filtering. If the result after this step is not by a good quality the upcoming identification process can fail. A major difficulty can appear in case of fingerprint identification if the images that should be identified from a fingerprint image database are noisy with different type of noise. The objectives of the paper are: the successful completion of the noisy digital image filtering, a novel more robust algorithm of identifying the best filtering algorithm and the classification and ranking of the images. The choice about the best filtered images of a set of 9 algorithms is made with a dual method of fuzzy and aggregation model. We are proposing through this paper a set of 9 filters with different novelty designed for processing the digital images using the following methods: quartiles, medians, average, thresholds and histogram equalization, applied all over the image or locally on small areas. Finally the statistics reveal the classification and ranking of the best algorithms.

Study on Accuracy of Judgments by Chinese Fingerprint Examiners

Directory of Open Access Journals (Sweden)

Shiquan Liu

2015-01-01

Full Text Available The interpretation of fingerprint evidence depends on the judgments of fingerprint examiners. This study assessed the accuracy of different judgments made by fingerprint examiners following the Analysis, Comparison, and Evaluation (ACE process. Each examiner was given five marks for analysis, comparison, and evaluation. We compared the experts′ judgments against the ground truth and used an annotation platform to evaluate how Chinese fingerprint examiners document their comparisons during the identification process. The results showed that different examiners demonstrated different accuracy of judgments and different mechanisms to reach them.

Fingerprint Sensors: Liveness Detection Issue and Hardware based Solutions

Directory of Open Access Journals (Sweden)

Shahzad Memon

2012-01-01

Full Text Available Securing an automated and unsupervised fingerprint recognition system is one of the most critical and challenging tasks in government and commercial applications. In these systems, the detection of liveness of a finger placed on a fingerprint sensor is a major issue that needs to be addressed in order to ensure the credibility of the system. The main focus of this paper is to review the existing fingerprint sensing technologies in terms of liveness detection and discusses hardware based ‘liveness detection’ techniques reported in the literature for automatic fingerprint biometrics.

Fingerprints as a Proxy for Readership of Sales Flyers

DEFF Research Database (Denmark)

Schmidt, Marcus J.; Krause, Niels; Solgaard, Hans Stubbe

2007-01-01

  Can readership of sales flyers and free newspapers be estimated by revealing fingerprints? In this paper we report the results of an empirical analysis based on 4604 flyer-pages conducted to assess the feasibility of the method. Results are encouraging, and indicate that the method presently may...... serve as a conservative estimate of readership. Advertising management may thus use the fingerprints-approach as an alternative audience measure and thereby assess the convergent validity of the traditional interview method and the fingerprint approach. While the fingerprint method appears valid...

Evaluation of fingerprint deformation using optical coherence tomography

Science.gov (United States)

Gutierrez da Costa, Henrique S.; Maxey, Jessica R.; Silva, Luciano; Ellerbee, Audrey K.

2014-02-01

Biometric identification systems have important applications to privacy and security. The most widely used of these, print identification, is based on imaging patterns present in the fingers, hands and feet that are formed by the ridges, valleys and pores of the skin. Most modern print sensors acquire images of the finger when pressed against a sensor surface. Unfortunately, this pressure may result in deformations, characterized by changes in the sizes and relative distances of the print patterns, and such changes have been shown to negatively affect the performance of fingerprint identification algorithms. Optical coherence tomography (OCT) is a novel imaging technique that is capable of imaging the subsurface of biological tissue. Hence, OCT may be used to obtain images of subdermal skin structures from which one can extract an internal fingerprint. The internal fingerprint is very similar in structure to the commonly used external fingerprint and is of increasing interest in investigations of identify fraud. We proposed and tested metrics based on measurements calculated from external and internal fingerprints to evaluate the amount of deformation of the skin. Such metrics were used to test hypotheses about the differences of deformation between the internal and external images, variations with the type of finger and location inside the fingerprint.

A network identity authentication system based on Fingerprint identification technology

Science.gov (United States)

Xia, Hong-Bin; Xu, Wen-Bo; Liu, Yuan

2005-10-01

Fingerprint verification is one of the most reliable personal identification methods. However, most of the automatic fingerprint identification system (AFIS) is not run via Internet/Intranet environment to meet today's increasing Electric commerce requirements. This paper describes the design and implementation of the archetype system of identity authentication based on fingerprint biometrics technology, and the system can run via Internet environment. And in our system the COM and ASP technology are used to integrate Fingerprint technology with Web database technology, The Fingerprint image preprocessing algorithms are programmed into COM, which deployed on the internet information server. The system's design and structure are proposed, and the key points are discussed. The prototype system of identity authentication based on Fingerprint have been successfully tested and evaluated on our university's distant education applications in an internet environment.

Capacity and optimal collusion attack channels for Gaussian fingerprinting games

Science.gov (United States)

Wang, Ying; Moulin, Pierre

2007-02-01

In content fingerprinting, the same media covertext - image, video, audio, or text - is distributed to many users. A fingerprint, a mark unique to each user, is embedded into each copy of the distributed covertext. In a collusion attack, two or more users may combine their copies in an attempt to "remove" their fingerprints and forge a pirated copy. To trace the forgery back to members of the coalition, we need fingerprinting codes that can reliably identify the fingerprints of those members. Researchers have been focusing on designing or testing fingerprints for Gaussian host signals and the mean square error (MSE) distortion under some classes of collusion attacks, in terms of the detector's error probability in detecting collusion members. For example, under the assumptions of Gaussian fingerprints and Gaussian attacks (the fingerprinted signals are averaged and then the result is passed through a Gaussian test channel), Moulin and Briassouli1 derived optimal strategies in a game-theoretic framework that uses the detector's error probability as the performance measure for a binary decision problem (whether a user participates in the collusion attack or not); Stone2 and Zhao et al. 3 studied average and other non-linear collusion attacks for Gaussian-like fingerprints; Wang et al. 4 stated that the average collusion attack is the most efficient one for orthogonal fingerprints; Kiyavash and Moulin 5 derived a mathematical proof of the optimality of the average collusion attack under some assumptions. In this paper, we also consider Gaussian cover signals, the MSE distortion, and memoryless collusion attacks. We do not make any assumption about the fingerprinting codes used other than an embedding distortion constraint. Also, our only assumptions about the attack channel are an expected distortion constraint, a memoryless constraint, and a fairness constraint. That is, the colluders are allowed to use any arbitrary nonlinear strategy subject to the above

Uniform Local Binary Pattern for Fingerprint Liveness Detection in the Gaussian Pyramid

Directory of Open Access Journals (Sweden)

Yujia Jiang

2018-01-01

Full Text Available Fingerprint recognition schemas are widely used in our daily life, such as Door Security, Identification, and Phone Verification. However, the existing problem is that fingerprint recognition systems are easily tricked by fake fingerprints for collaboration. Therefore, designing a fingerprint liveness detection module in fingerprint recognition systems is necessary. To solve the above problem and discriminate true fingerprint from fake ones, a novel software-based liveness detection approach using uniform local binary pattern (ULBP in spatial pyramid is applied to recognize fingerprint liveness in this paper. Firstly, preprocessing operation for each fingerprint is necessary. Then, to solve image rotation and scale invariance, three-layer spatial pyramids of fingerprints are introduced in this paper. Next, texture information for three layers spatial pyramids is described by using uniform local binary pattern to extract features of given fingerprints. The accuracy of our proposed method has been compared with several state-of-the-art methods in fingerprint liveness detection. Experiments based on standard databases, taken from Liveness Detection Competition 2013 composed of four different fingerprint sensors, have been carried out. Finally, classifier model based on extracted features is trained using SVM classifier. Experimental results present that our proposed method can achieve high recognition accuracy compared with other methods.

Chemical Fingerprinting of Materials Developed Due To Environmental Issues

Science.gov (United States)

Smith, Doris A.; McCool, A. (Technical Monitor)

2000-01-01

This paper presents viewgraphs on chemical fingerprinting of materials developed due to environmental issues. Some of the topics include: 1) Aerospace Materials; 2) Building Blocks of Capabilities; 3) Spectroscopic Techniques; 4) Chromatographic Techniques; 5) Factors that Determine Fingerprinting Approach; and 6) Fingerprinting: Combination of instrumental analysis methods that diagnostically characterize a material.

Ultra-high-performance liquid chromatography fingerprinting method for chemical screening of metabolites in cultivation broth

Czech Academy of Sciences Publication Activity Database

Kameník, Zdeněk; Hadacek, F.; Marečková, M.; Ulanová, Dana; Kopecký, J.; Chobot, V.; Plháčková, Kamila; Olšovská, Jana

2010-01-01

Roč. 1217, č. 51 (2010), s. 8016-8025 ISSN 0021-9673 R&D Projects: GA MŠk 2B08064 Institutional research plan: CEZ:AV0Z50200510 Keywords : UHPLC * high - throughput fingerprinting * secondary metabolites Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 4.194, year: 2010

[Studies on fingerprinting of Flos Buddleja by RP-HPLC].

Science.gov (United States)

Han, Peng; Cui, Ya-jun; Guo, Hong-zhu; Guo, De-an

2004-10-01

To establish fingerprinting of Flos Buddleja by using RP-HPLC for the quality control. The HPLC condition was as follows: Inertsil ODS-3 C18 analytical column (4.6 mm x 250 mm, 5 microm), gredient eluation with MeCN (0.1% TFA)-H2O (0.1%TFA), flow rate 1.0 mL x min(-1), detection wavelength 254 nm. 10 commercial samples were analyzed to establish a fingerprinting. Among the obtained fingerprinting, most of the detected peaks were separated effectively. The accuracy, repeatability and stability of this method were satisfied. The RSDs of relative retention time and area of aimed peaks which existed in all samples wereless than 5%. Theresults were in accordance with the request of fingerprinting. The established fingerprinting can be used for the quality control of Flos Buddleja.

Fingerprint matching on smart card: A review

CSIR Research Space (South Africa)

Baruni, Kedimotse P

2016-12-01

Full Text Available Fingerprint Match-on-Card (MoC) offers the highest degree of privacy and security to cardholders as the fingerprint never leaves the secure environment of a smart card. The level of security of a biometric system is evaluated by the location where...

Laser mass spectrometry for DNA fingerprinting for forensic applications

Energy Technology Data Exchange (ETDEWEB)

Chen, C.H.; Tang, K.; Taranenko, N.I.; Allman, S.L.; Chang, L.Y.

1994-12-31

The application of DNA fingerprinting has become very broad in forensic analysis, patient identification, diagnostic medicine, and wildlife poaching, since every individual`s DNA structure is identical within all tissues of their body. DNA fingerprinting was initiated by the use of restriction fragment length polymorphisms (RFLP). In 1987, Nakamura et al. found that a variable number of tandem repeats (VNTR) often occurred in the alleles. The probability of different individuals having the same number of tandem repeats in several different alleles is very low. Thus, the identification of VNTR from genomic DNA became a very reliable method for identification of individuals. DNA fingerprinting is a reliable tool for forensic analysis. In DNA fingerprinting, knowledge of the sequence of tandem repeats and restriction endonuclease sites can provide the basis for identification. The major steps for conventional DNA fingerprinting include (1) specimen processing (2) amplification of selected DNA segments by PCR, and (3) gel electrophoresis to do the final DNA analysis. In this work we propose to use laser desorption mass spectrometry for fast DNA fingerprinting. The process and advantages are discussed.

FPRandom: Randomizing core browser objects to break advanced device fingerprinting techniques

OpenAIRE

Laperdrix , Pierre; Baudry , Benoit; Mishra , Vikas

2017-01-01

International audience; The rich programming interfaces (APIs) provided by web browsers can be diverted to collect a browser fingerprint. A small number of queries on these interfaces are sufficient to build a fingerprint that is statistically unique and very stable over time. Consequently, the fingerprint can be used to track users. Our work aims at mitigating the risk of browser fingerprinting for users privacy by 'breaking' the stability of a fingerprint over time. We add randomness in the...

Straightforward fabrication of black nano silica dusting powder for latent fingerprint imaging

Science.gov (United States)

Komalasari, Isna; Krismastuti, Fransiska Sri Herwahyu; Elishian, Christine; Handayani, Eka Mardika; Nugraha, Willy Cahya; Ketrin, Rosi

2017-11-01

Imaging of latent fingerprint pattern (aka fingermark) is one of the most important and accurate detection methods in forensic investigation because of the characteristic of individual fingerprint. This detection technique relies on the mechanical adherence of fingerprint powder to the moisture and oily component of the skin left on the surface. The particle size of fingerprint powder is one of the critical parameter to obtain excellent fingerprint image. This study develops a simple, cheap and straightforward method to fabricate Nano size black dusting fingerprint powder based on Nano silica and applies the powder to visualize latent fingerprint. The nanostructured silica was prepared from tetraethoxysilane (TEOS) and then modified with Nano carbon, methylene blue and sodium acetate to color the powder. Finally, as a proof-of-principle, the ability of this black Nano silica dusting powder to image latent fingerprint is successfully demonstrated and the results show that this fingerprint powder provides clearer fingerprint pattern compared to the commercial one highlighting the potential application of the nanostructured silica in forensic science.

An Investigation on the Problem of Thinning in Fingerprint Processing

Directory of Open Access Journals (Sweden)

I. O. Omeiza

2012-06-01

Full Text Available A high-integrity thinning procedure for binarised fingerprints is proposed in this paper. Several authors and software developers have approached the thinning problems in fingerprint-processing differently. Their approach produced in most cases, fingerprint skeletons with low reliability and thus require additional minutiae-pruning stage to discard the erroneous minutiae in the obtained skeletons. The work involves a careful blending of some already existing algorithms to achieve optimal performance in thinning binarised fingerprint images. The algorithms considered are as follows. The "Zhang and Suen" parallel algorithm for thinning digital patterns, the improved parallel thinning algorithm by Holt and company and template-based thinning algorithm by Stentiford and Mortimer. The idea of combining these stand-alone algorithms to improve the quality of obtained objects skeleton in general image processing was first suggested in a text by Parker in 1998. However, his work does not specifically address the fingerprint problem. This work has examined and proves the plausibility of this thinning approach in the particular case of fingerprint application domain. The thinning procedure obtained satisfactory skeletons for fingerprint applications.

Making DNA Fingerprints.

Science.gov (United States)

Nunley, Kathie F.

1996-01-01

Presents an activity to simulate electrophoresis using everyday items. Uses adding machine paper to construct a set of DNA fingerprints that can be used to solve crime cases designed by students in any biology class. (JRH)

Vitality detection in personal authentication systems using fingerprints

OpenAIRE

Coli, Pietro

2008-01-01

Fingerprints are considered as the sign of each human being, and this has contributed the development of biometric applications based on such features. Since 2002, an important vulnerability has been shown: it is possible to deceive fingerprint scanners through artificial replicas of fingertips. In order to address this shortcoming it is need to recognize a spoofing attempt with artificial fingers looking for some “life signs” each time an user submit a fingerprint (vitality detection problem...

The thermodynamics of latent fingerprint corrosion of metal elements and alloys.

Science.gov (United States)

Bond, John W

2008-11-01

Redox reactions taking place between the surface of a metal and fingerprint residue have been expressed thermodynamically in terms of both the Nernst equation for reduction potential and the complexation constant for the formation of complex metal halide ions in aqueous solution. These expressions are used to explain experimental results for the corrosion of 10 different metal elements by fingerprint residue in air at room temperature. Corrosion of noble metals, such as silver and gold, supports the proposition that the degree of metal corrosion is enhanced by the presence of chloride ions in eccrine sweat. Extending the experiments to include 10 metal alloys enabled the construction of a fingerprint corrosion series for 20 different metals. Fingerprint corrosion on metals alloyed with > approximately 40% copper was found to display third level fingerprint detail. A comparison of both conventional ink on paper and digital (Livescan) fingerprinting techniques with fingerprints deposited on 9 Karat gold alloy has shown that gold alloy depositions are least susceptible to third level detail obliteration by poor fingerprint capturing techniques.

Screen Fingerprints as a Novel Modality for Active Authentication

Science.gov (United States)

2014-03-01

Screen fingerprint is the new cyber biometric modality that we have proposed to measure and analyze active authentication. The screen finger ...as a new biometric modality for active authentication. Such a fingerprint is acquired by taking a screen recording of the computer being used and...extracting discriminative visual feature from the recording. 15. SUBJECT TERMS Active authentication, screen fingerprints, biometrics 16. SECURITY

Fingerprinting Mobile Devices Using Personalized Configurations

Directory of Open Access Journals (Sweden)

Kurtz Andreas

2016-01-01

Full Text Available Recently, Apple removed access to various device hardware identifiers that were frequently misused by iOS third-party apps to track users. We are, therefore, now studying the extent to which users of smartphones can still be uniquely identified simply through their personalized device configurations. Using Apple’s iOS as an example, we show how a device fingerprint can be computed using 29 different configuration features. These features can be queried from arbitrary thirdparty apps via the official SDK. Experimental evaluations based on almost 13,000 fingerprints from approximately 8,000 different real-world devices show that (1 all fingerprints are unique and distinguishable; and (2 utilizing a supervised learning approach allows returning users or their devices to be recognized with a total accuracy of 97% over time

An investigation on the problem of thinning in fingerprint processing ...

African Journals Online (AJOL)

A high-integrity thinning procedure for binarised fingerprints is proposed in this paper. Several authors and software developers have approached the thinning problems in fingerprint-processing differently. Their approach produced in most cases, fingerprint skeletons with low reli abi lity and thus require additional ...

Towards a complete rule-based classification approach for flat fingerprints

CSIR Research Space (South Africa)

Webb, L

2014-12-01

Full Text Available fingerprints. This work implements an algorithm which includes new rules to account for more instances of flat fingerprints with missing singular points, specifically when the delta of a Right Loop or Left Loop fingerprint is not captured, when one of the loops...

Edible Neotropical Blueberries: Antioxidant and Compositional Fingerprint Analysis

Science.gov (United States)

DASTMALCHI, KEYVAN; FLORES, GEMA; PETROVA, VANYA; PEDRAZA-PEÑALOSA, PAOLA; KENNELLY, EDWARD J.

2012-01-01

Edible blueberry species are well recognized for their potential health benefits. Ericaceae fruits including the North American highbush blueberry (Vaccinium corymbosum L.) and five less common edible blueberry relatives from the New World tropics, Anthopterus wardii Ball, Cavendishia grandifolia Hoerld, Macleania coccoloboides A. C. Sm., Sphyrospermum buxifolium Poepp. & Endl., and Sphyrospermum cordifolium Benth, were investigated for their antioxidant properties and phenolic profiles. The Neotropical berries C. grandifolia and A. wardii exhibited significantly higher DPPH• and ABTS•+ scavenging and iron chelation activities than V. corymbosum. Total phenolic content and HPLC-PDA compositional fingerprint analyses were also carried out. Significant correlations were observed among total phenolic contents, DPPH• and ABTS•+ scavenging, and iron chelation activities. Using HPLC-PDA, the phenolic constituents in the berries were identified as chlorogenic acid, p-coumaric acid, hyperoside, quercetin-3-O-glucoside, isoorientin, isovitexin, orientin and vitexin. Principal components analysis reduced the dimensions of antioxidant and total phenolic data to two components, which accounted for 95% of total variation among the six fruits. Each fruit species formed its own cluster, and therefore the antioxidant profile of each species was shown to be distinct. PMID:21391608

Extracting subsurface fingerprints using optical coherence tomography

CSIR Research Space (South Africa)

Akhoury, SS

2015-02-01

Full Text Available Subsurface Fingerprints using Optical Coherence Tomography Sharat Saurabh Akhoury, Luke Nicholas Darlow Modelling and Digital Science, Council for Scientific and Industrial Research, Pretoria, South Africa Abstract Physiologists have found... approach to extract the subsurface fingerprint representation using a high-resolution imaging technology known as Optical Coherence Tomography (OCT). ...

Detection and analysis of diamond fingerprinting feature and its application

Energy Technology Data Exchange (ETDEWEB)

Li Xin; Huang Guoliang; Li Qiang; Chen Shengyi, E-mail: tshgl@tsinghua.edu.cn [Department of Biomedical Engineering, the School of Medicine, Tsinghua University, Beijing, 100084 (China)

2011-01-01

Before becoming a jewelry diamonds need to be carved artistically with some special geometric features as the structure of the polyhedron. There are subtle differences in the structure of this polyhedron in each diamond. With the spatial frequency spectrum analysis of diamond surface structure, we can obtain the diamond fingerprint information which represents the 'Diamond ID' and has good specificity. Based on the optical Fourier Transform spatial spectrum analysis, the fingerprinting identification of surface structure of diamond in spatial frequency domain was studied in this paper. We constructed both the completely coherent diamond fingerprinting detection system illuminated by laser and the partially coherent diamond fingerprinting detection system illuminated by led, and analyzed the effect of the coherence of light source to the diamond fingerprinting feature. We studied rotation invariance and translation invariance of the diamond fingerprinting and verified the feasibility of real-time and accurate identification of diamond fingerprint. With the profit of this work, we can provide customs, jewelers and consumers with a real-time and reliable diamonds identification instrument, which will curb diamond smuggling, theft and other crimes, and ensure the healthy development of the diamond industry.

Quality and matching performance analysis of three-dimensional unraveled fingerprints

Science.gov (United States)

Wang, Yongchang; Hao, Qi; Fatehpuria, Abhishika; Hassebrook, Laurence G.; Lau, Daniel L.

2010-07-01

The use of fingerprints as a biometric is both the oldest mode of computer-aided personal identification and the most-relied-on technology in use today. However, current acquisition methods have some challenging and peculiar difficulties. For higher performance fingerprint data acquisition and verification, a novel noncontact 3-D fingerprint scanner is investigated, where both the detailed 3-D and albedo information of the finger is obtained. The obtained high-resolution 3-D prints are further converted into 3-D unraveled prints, to be compatible with traditional 2-D automatic fingerprint identification systems. As a result, many limitations imposed on conventional fingerprint capture and processing can be reduced by the unobtrusiveness of this approach and the extra depth information acquired. To compare the quality and matching performances of 3-D unraveled with traditional 2-D plain fingerprints, we collect both 3-D prints and their 2-D plain counterparts. The print quality and matching performances are evaluated and analyzed by using National Institute of Standard Technology fingerprint software. Experimental results show that the 3-D unraveled print outperforms the 2-D print in both quality and matching performances.

Generation of DNA profiles from fingerprints developed with columnar thin film technique.

Science.gov (United States)

Plazibat, Stephanie L; Roy, Reena; Swiontek, Stephen E; Lakhtakia, Akhlesh

2015-12-01

Partial-bloody fingerprints and partial fingerprints with saliva are often encountered at crime scenes, potentially enabling the combination of fingerprint and DNA analyses for absolute identification, provided that the development technique for fingerprint analysis does not inhibit DNA analysis. 36 partial-bloody fingerprints and 30 fingerprints wetted with saliva, all deposited on brass, were first developed using the columnar-thin-film (CTF) technique and then subjected to short tandem repeat (STR) DNA analysis. Equal numbers of samples were subjected to the same DNA analysis without development. Tris (8-hydroxyquinolinato) aluminum, or Alq3, was evaporated to deposit CTFs for development of the prints. DNA was extracted from all 132 samples, quantified, and amplified with AmpFlSTR(®) Identifiler Plus Amplification Kit. Additionally, DNA analyses were conducted on four blood smears on un-fingerprinted brass that had been subjected to CTF deposition and four blood smears on un-fingerprinted brass that had not been subjected to CTF deposition. Complete and concordant autosomal STR profiles of the same quality were obtained from both undeveloped and CTF-developed fingerprints, indicating that CTF development of fingerprints preserves DNA and does not inhibit subsequent DNA analysis. Even when there were no fingerprints, CTF deposition did not lead to inhibition of DNA analysis. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

On Realistically Attacking Tor with Website Fingerprinting

Directory of Open Access Journals (Sweden)

Wang Tao

2016-10-01

Full Text Available Website fingerprinting allows a local, passive observer monitoring a web-browsing client’s encrypted channel to determine her web activity. Previous attacks have shown that website fingerprinting could be a threat to anonymity networks such as Tor under laboratory conditions. However, there are significant differences between laboratory conditions and realistic conditions. First, in laboratory tests we collect the training data set together with the testing data set, so the training data set is fresh, but an attacker may not be able to maintain a fresh data set. Second, laboratory packet sequences correspond to a single page each, but for realistic packet sequences the split between pages is not obvious. Third, packet sequences may include background noise from other types of web traffic. These differences adversely affect website fingerprinting under realistic conditions. In this paper, we tackle these three problems to bridge the gap between laboratory and realistic conditions for website fingerprinting. We show that we can maintain a fresh training set with minimal resources. We demonstrate several classification-based techniques that allow us to split full packet sequences effectively into sequences corresponding to a single page each. We describe several new algorithms for tackling background noise. With our techniques, we are able to build the first website fingerprinting system that can operate directly on packet sequences collected in the wild.

Plant regeneration of Erigeron breviscapus (vant.) Hand. Mazz. and its chromatographic fingerprint analysis for quality control.

Science.gov (United States)

Liu, Chun-Zhao; Gao, Min; Guo, Bin

2008-01-01

An efficient micropropagation system for Erigeron breviscapus (vant.) Hand. Mazz., an important medicinal plant for heart disease, has been developed. Shoot organogenesis occurred from E. breviscapus leaf explants inoculated on a medium supplemented with a combination of plant growth regulators. On average, 17 shoots per leaf explant were produced after 30 days when they were cultured on MS basal salts and vitamin medium containing 5 microM 6-benzylaminopurine (BAP) and 5 microM 1-naphthaleneacetic acid (NAA). All the regenerated shoots formed complete plantlets on a medium containing 2.5-10 microM indole-3-butyric acid (IBA) within 30 days, and 80.2% of the regenerated plantlets survived and grew vigorously in field conditions. Based on the variation in common peaks and the produced amount of the most important bioactive component, scutellarin, a high performance liquid chromatography (HPLC) fingerprinting system was developed for quality control of these micropropagated plants. Chemical constituents in E. breviscapus micropropagated plants varied during plant development from regeneration to maturation, the latter of which showed the most similar phytochemical profile in comparison with mother plants. The regeneration protocol and HPLC fingerprint analysis developed here provided a new approach to quality control of micropropagated plants producing secondary metabolites with significant implications for germplasm conservation.

Efficient internal and surface fingerprint extraction and blending using optical coherence tomography.

Science.gov (United States)

Darlow, Luke Nicholas; Connan, James

2015-11-01

Optical coherence tomography provides a 3D representation of fingertip skin where surface and internal fingerprints are found. These fingerprints are topographically identical. However, the surface skin is prone to damage, distortion, and spoofing; and the internal fingerprint is difficult to access and extract. This research presents a novel scaling-resolution approach to fingerprint zone detection and extraction. Furthermore, a local-quality-based blending procedure is also proposed. The accuracy of the zone-detection algorithm is comparable to an earlier work, yielding a mean-squared error of 25.9 and structural similarity of 95.8% (compared to a ground-truth estimate). Blending the surface and internal fingerprints improved the National Institute of Science and Technology's Fingerprint Image Quality scores and the average maximum match scores (when matched against conventional surface counterparts). The fingerprint blending procedure was able to combine high-quality regions from both fingerprints, thus mitigating surface wrinkles and anomalous poor-quality regions. Furthermore, spoof detection via a surface-to-internal fingerprint comparison was proposed and tested.

DNA Fingerprinting in a Forensic Teaching Experiment

Science.gov (United States)

Wagoner, Stacy A.; Carlson, Kimberly A.

2008-01-01

This article presents an experiment designed to provide students, in a classroom laboratory setting, a hands-on demonstration of the steps used in DNA forensic analysis by performing DNA extraction, DNA fingerprinting, and statistical analysis of the data. This experiment demonstrates how DNA fingerprinting is performed and how long it takes. It…

8 CFR 236.5 - Fingerprints and photographs.

Science.gov (United States)

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Fingerprints and photographs. 236.5 Section... to Order of Removal § 236.5 Fingerprints and photographs. Every alien 14 years of age or older... photographs shall be made available to Federal, State, and local law enforcement agencies upon request to the...

Quantifying the weight of fingerprint evidence through the spatial relationship, directions and types of minutiae observed on fingermarks.

Science.gov (United States)

Neumann, Cedric; Champod, Christophe; Yoo, Mina; Genessay, Thibault; Langenburg, Glenn

2015-03-01

This paper presents a statistical model for the quantification of the weight of fingerprint evidence. Contrarily to previous models (generative and score-based models), our model proposes to estimate the probability distributions of spatial relationships, directions and types of minutiae observed on fingerprints for any given fingermark. Our model is relying on an AFIS algorithm provided by 3M Cogent and on a dataset of more than 4,000,000 fingerprints to represent a sample from a relevant population of potential sources. The performance of our model was tested using several hundreds of minutiae configurations observed on a set of 565 fingermarks. In particular, the effects of various sub-populations of fingers (i.e., finger number, finger general pattern) on the expected evidential value of our test configurations were investigated. The performance of our model indicates that the spatial relationship between minutiae carries more evidential weight than their type or direction. Our results also indicate that the AFIS component of our model directly enables us to assign weight to fingerprint evidence without the need for the additional layer of complex statistical modeling involved by the estimation of the probability distributions of fingerprint features. In fact, it seems that the AFIS component is more sensitive to the sub-population effects than the other components of the model. Overall, the data generated during this research project contributes to support the idea that fingerprint evidence is a valuable forensic tool for the identification of individuals. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Application of DNA fingerprints for cell-line individualization.

Science.gov (United States)

Gilbert, D A; Reid, Y A; Gail, M H; Pee, D; White, C; Hay, R J; O'Brien, S J

1990-09-01

DNA fingerprints of 46 human cell lines were derived using minisatellite probes for hypervariable genetic loci. The incidence of 121 HaeIII DNA fragments among 33 cell lines derived from unrelated individuals was used to estimate allelic and genotypic frequencies for each fragment and for composite individual DNA fingerprints. We present a quantitative estimate of the extent of genetic difference between individuals, an estimate based on the percentage of restriction fragments at which they differ. The average percent difference (APD) among pairwise combinations from the population of 33 unrelated cell lines was 76.9%, compared with the APD in band sharing among cell lines derived from the same individual (less than or equal to 1.2%). Included in this survey were nine additional cell lines previously implicated as HeLa cell derivatives, and these lines were clearly confirmed as such by DNA fingerprints (APD less than or equal to 0.6%). On the basis of fragment frequencies in the tested cell line population, a simple genetic model was developed to estimate the frequencies of each DNA fingerprint in the population. The median incidence was 2.9 X 10(-17), and the range was 2.4 X 10(-21) to 6.6 X 10(-15). This value approximates the probability that a second cell line selected at random from unrelated individuals will match a given DNA fingerprint. Related calculations address the chance that any two DNA fingerprints would be identical among a large group of cell lines. This estimate is still very slight; for example, the chance of two or more common DNA fingerprints among 1 million distinct individuals is less than .001. The procedure provides a straightforward, easily interpreted, and statistically robust method for identification and individualization of human cells.

The Ins and Outs of DNA Fingerprinting the Infectious Fungi

Science.gov (United States)

Soll, David R.

2000-01-01

DNA fingerprinting methods have evolved as major tools in fungal epidemiology. However, no single method has emerged as the method of choice, and some methods perform better than others at different levels of resolution. In this review, requirements for an effective DNA fingerprinting method are proposed and procedures are described for testing the efficacy of a method. In light of the proposed requirements, the most common methods now being used to DNA fingerprint the infectious fungi are described and assessed. These methods include restriction fragment length polymorphisms (RFLP), RFLP with hybridization probes, randomly amplified polymorphic DNA and other PCR-based methods, electrophoretic karyotyping, and sequencing-based methods. Procedures for computing similarity coefficients, generating phylogenetic trees, and testing the stability of clusters are then described. To facilitate the analysis of DNA fingerprinting data, computer-assisted methods are described. Finally, the problems inherent in the collection of test and control isolates are considered, and DNA fingerprinting studies of strain maintenance during persistent or recurrent infections, microevolution in infecting strains, and the origin of nosocomial infections are assessed in light of the preceding discussion of the ins and outs of DNA fingerprinting. The intent of this review is to generate an awareness of the need to verify the efficacy of each DNA fingerprinting method for the level of genetic relatedness necessary to answer the epidemiological question posed, to use quantitative methods to analyze DNA fingerprint data, to use computer-assisted DNA fingerprint analysis systems to analyze data, and to file data in a form that can be used in the future for retrospective and comparative studies. PMID:10756003

PhytoAuthent: Molecular authentication of complex herbal food supplements for safety and efficacy

Directory of Open Access Journals (Sweden)

Mihael Ichim

2017-10-01

Full Text Available The PhytoAuthent project was structured to gather, test, develop and apply, in real life case scenarios, molecular techniques, such as biochemical fingerprinting and DNA sequence-based methods, for plant identification of constituents in complex herbal products. The project had a strong focus on applied aspects like protecting consumers from health risks associated with product substitution and contamination of herbal products.

Partial Device Fingerprints

NARCIS (Netherlands)

Ciere, M.; Hernandez Ganan, C.; van Eeten, M.J.G.

2017-01-01

In computing, remote devices may be identified by means of device fingerprinting, which works by collecting a myriad of clientside attributes such as the device’s browser and operating system version, installed plugins, screen resolution, hardware artifacts, Wi-Fi settings, and anything else

Diversity of DNA fingerprints in Cryptococcus neoformans.

Science.gov (United States)

Varma, A; Swinne, D; Staib, F; Bennett, J E; Kwon-Chung, K J

1995-07-01

DNA fingerprint patterns of 156 Cryptococcus neoformans isolates (26 AIDS patients, 46 non-AIDS patients, and 40 environmental sources) from both varieties (126 C. neoformans var. neoformans and 30 C. neoformans var. gattii isolates) and from seven countries were analyzed by using the DNA probe UT-4p. Nine and twelve distinct DNA fingerprint patterns were observed for isolates of the C. neoformans var. neoformans and var. gattii, respectively. No pattern was unique to AIDS patients, non-AIDS patients, or the environment. Pattern II was observed more often in non-AIDS patients (8 of 23) than in AIDS patients (0 of 25). Pattern V was the most prevalent pattern (42 of 82) in clinical and environmental isolates. Isolates from three AIDS patients in Burundi and Zaire exhibited patterns identical to each other but different from those of isolates collected from their houses (i.e., dust of floors, walls, etc.) or a nearby pigeon coop. DNA fingerprint stability was determined for 53 isolates from nine non-AIDS patients at different time intervals during 5 to 128 weeks of antifungal therapy. For eight patients, the fingerprint pattern was stable while the ninth may have had a mixed infection. Pattern II was observed in 4 of 9 patients, which is similar to 4 of 14 in other non-AIDS patients as reported here. In spite of the extensive pattern heterogeneity among 15 C. neoformans var. gattii isolates in Australia, the patterns observed in seven California isolates were quite different from those in Australia. Among isolates of C. neoformans var. gattii, one fingerprint pattern (designated b) was observed in several countries of the Far East. The fingerprint patterns of two of three environmental isolates from Eucalyptus camaldulensis trees in Australia were identical to those of 2 of the 12 clinical isolates from the country.

Studies on Chromatographic Fingerprint and Fingerprinting Profile-Efficacy Relationship of Polygoni Perfoliati Herba

Directory of Open Access Journals (Sweden)

Li Tian

2013-01-01

Full Text Available Polygoni Perfoliati Herba is widely used in China with antibacterium, anti-inflammatory, expectorant, antitumor, and antivirus activities. To reveal the mechanisms of the activities of Polygoni Perfoliati Herba, the relationship between the fingerprinting profile and its bioactivities was investigated. In the present study, high-performance liquid chromatographic (HPLC fingerprinting method was developed. The established method was applied to analyze 51 batches of Polygoni Perfoliati Herba samples collected from different locations or in different harvesting times in China. Chemometrics, including similarity analysis, hierarchical clustering analysis, and principal component analysis, were used to express their similarities. It was found that similarity values of the samples were in the range of 0.432–0.998. The results of analgesic tests indicated that Polygoni Perfoliati Herba could significantly inhibit pain induced by hot plate and acetic acid in mice. The results of anti-inflammatory tests showed that Polygoni Perfoliati Herba had good anti-inflammatory effects (P < 0.01 in two models including dimethyl benzene-induced ear edema and acetic acid-induced peritoneal permeability in mice. Combining the results from chromatographic fingerprints with those from bioactivities, we found that seven peaks from Polygoni Perfoliati Herba were mainly responsible for analgesic and anti-inflammatory activities.

Teaching DNA Fingerprinting using a Hands-on Simulation.

Science.gov (United States)

Schug, Thatcher

1998-01-01

Presents an inexpensive hands-on lesson in DNA fingerprinting that can be completed in a single class period. Involves students in solving a murder in which a drop of blood is fingerprinted and matched with the blood of the murderer. (DDR)

DNA fingerprinting of the NCI-60 cell line panel.

Science.gov (United States)

Lorenzi, Philip L; Reinhold, William C; Varma, Sudhir; Hutchinson, Amy A; Pommier, Yves; Chanock, Stephen J; Weinstein, John N

2009-04-01

The National Cancer Institute's NCI-60 cell line panel, the most extensively characterized set of cells in existence and a public resource, is frequently used as a screening tool for drug discovery. Because many laboratories around the world rely on data from the NCI-60 cells, confirmation of their genetic identities represents an essential step in validating results from them. Given the consequences of cell line contamination or misidentification, quality control measures should routinely include DNA fingerprinting. We have, therefore, used standard DNA microsatellite short tandem repeats to profile the NCI-60, and the resulting DNA fingerprints are provided here as a reference. Consistent with previous reports, the fingerprints suggest that several NCI-60 lines have common origins: the melanoma lines MDA-MB-435, MDA-N, and M14; the central nervous system lines U251 and SNB-19; the ovarian lines OVCAR-8 and OVCAR-8/ADR (also called NCI/ADR); and the prostate lines DU-145, DU-145 (ATCC), and RC0.1. Those lines also show that the ability to connect two fingerprints to the same origin is not affected by stable transfection or by the development of multidrug resistance. As expected, DNA fingerprints were not able to distinguish different tissues-of-origin. The fingerprints serve principally as a barcodes.

An Efficient Automatic Attendance System Using Fingerprint Reconstruction Technique

OpenAIRE

Ramakrishnan, Josphineleela; Ramakrishnan, M.

2012-01-01

Biometric time and attendance system is one of the most successful applications of biometric technology. One of the main advantage of a biometric time and attendance system is it avoids "buddy-punching". Buddy punching was a major loophole which will be exploiting in the traditional time attendance systems. Fingerprint recognition is an established field today, but still identifying individual from a set of enrolled fingerprints is a time taking process. Most fingerprint-based biometric syste...

Friction ridge skin - Automated Fingerprint Identification System (AFIS)

NARCIS (Netherlands)

Meuwly, Didier

2013-01-01

This contribution describes the development and the forensic use of automated fingerprint identification systems (AFISs). AFISs were initially developed in order to overcome the limitations of the paper-based fingerprint collections, by digitizing the ten-print cards in computerized databases and to

Rotation-invariant fingerprint matching using radon and DCT

Indian Academy of Sciences (India)

Sangita Bharkad

2017-11-20

Nov 20, 2017 ... [6] Bazen A and Gerez S 2003 Fingerprint matching by thin- plate spline modeling of elastic deformations. Pattern. Recogn. 36(8): 1859–1867. [7] Jain A, Hong L and Bolle R 1997 On-line fingerprint veri- fication. IEEE Trans.

The Development Of Mathematical Model For Automated Fingerprint Identification Systems Analysis

International Nuclear Information System (INIS)

Ardisasmita, M. Syamsa

2001-01-01

Fingerprint has a strong oriented and periodic structure composed of dark lines of raised skin (ridges) and clear lines of lowered skin (furrows)that twist to form a distinct pattern. Although the manner in which the ridges flow is distinctive, other characteristics of the fingerprint called m inutiae a re what are most unique to the individual. These features are particular patterns consisting of terminations or bifurcations of the ridges. To assert if two fingerprints are from the same finger or not, experts detect those minutiae. AFIS (Automated Fingerprint Identification Systems) extract and compare these features for determining a match. The classic methods of fingerprints recognition are not suitable for direct implementation in form of computer algorithms. The creation of a finger's model was however the necessity of development of new, better algorithms of analysis. This paper presents a new numerical methods of fingerprints' simulation based on mathematical model of arrangement of dermatoglyphics and creation of minutiae. This paper describes also the design and implementation of an automated fingerprint identification systems which operates in two stages: minutiae extraction and minutiae matching

Practical Fingerprinting Localization for Indoor Positioning System by Using Beacons

Directory of Open Access Journals (Sweden)

Santosh Subedi

2017-01-01

Full Text Available Recent developments in the fields of smartphones and wireless communication technologies such as beacons, Wi-Fi, and ultra-wideband have made it possible to realize indoor positioning system (IPS with a few meters of accuracy. In this paper, an improvement over traditional fingerprinting localization is proposed by combining it with weighted centroid localization (WCL. The proposed localization method reduces the total number of fingerprint reference points over the localization space, thus minimizing both the time required for reading radio frequency signals and the number of reference points needed during the fingerprinting learning process, which eventually makes the process less time-consuming. The proposed positioning has two major steps of operation. In the first step, we have realized fingerprinting that utilizes lightly populated reference points (RPs and WCL individually. Using the location estimated at the first step, WCL is run again for the final location estimation. The proposed localization technique reduces the number of required fingerprint RPs by more than 40% compared to normal fingerprinting localization method with a similar localization estimation error.

Quality Evaluation of the Traditional Medicine Majun Mupakhi ELA via Chromatographic Fingerprinting Coupled with UHPLC-DAD-Quadrupole-Orbitrap-MS and the Antioxidant Activity In Vitro.

Science.gov (United States)

Reheman, Ayinuer; Aisa, Haji Akber; Ma, Qing Ling; Nijat, Dilaram; Abdulla, Rahima

2018-01-01

By merging a high-performance liquid chromatography diode array detector (HPLC-DAD) method with high-performance thin-layer chromatography (HPTLC), an assay was developed for chemical fingerprinting and quantitative analysis of traditional medicine Majun Mupakhi ELA (MME), and constituent compounds were identified using HPLC coupled with UHPLC-DAD-Quadrupole-Orbitrap-MS method. In addition, the antioxidant capacity of MME was assessed based on the ability of components to scavenge radicals using in vitro method. Using a HPLC-DAD method with HPTLC easily validated the chemical fingerprinting results and quantified three characteristic components, namely, gallic acid (1), daidzein (2), and icariin (3), in commercial MMEs. The three compounds presented excellent regression values ( R 2 = 0.9999) in the ranges of the test and the method recovery was in the range from 100.49% to 100.68%. The fingerprints had 27 common characteristic peaks, of which 13 were verified by rapid UHPLC-DAD-Q-Orbitrap-MS analysis. In vitro antioxidant assays rapidly assessed and contrasted antioxidant activity or the free radical scavenging activity of the main polyphenolic classes in MMEs, and the antioxidant capacity was mostly affected by the presence of gallic acid. Thus, this study establishes a powerful and meaningful approach for MME quality control and for assessing in vitro antioxidant activity.

Performance characterization of structured light-based fingerprint scanner

Science.gov (United States)

Hassebrook, Laurence G.; Wang, Minghao; Daley, Raymond C.

2013-05-01

Our group believes that the evolution of fingerprint capture technology is in transition to include 3-D non-contact fingerprint capture. More specifically we believe that systems based on structured light illumination provide the highest level of depth measurement accuracy. However, for these new technologies to be fully accepted by the biometric community, they must be compliant with federal standards of performance. At present these standards do not exist for this new biometric technology. We propose and define a set of test procedures to be used to verify compliance with the Federal Bureau of Investigation's image quality specification for Personal Identity Verification single fingerprint capture devices. The proposed test procedures include: geometric accuracy, lateral resolution based on intensity or depth, gray level uniformity and flattened fingerprint image quality. Several 2-D contact analogies, performance tradeoffs and optimization dilemmas are evaluated and proposed solutions are presented.

A Fingerprint Encryption Scheme Based on Irreversible Function and Secure Authentication

Directory of Open Access Journals (Sweden)

Yijun Yang

2015-01-01

Full Text Available A fingerprint encryption scheme based on irreversible function has been designed in this paper. Since the fingerprint template includes almost the entire information of users’ fingerprints, the personal authentication can be determined only by the fingerprint features. This paper proposes an irreversible transforming function (using the improved SHA1 algorithm to transform the original minutiae which are extracted from the thinned fingerprint image. Then, Chinese remainder theorem is used to obtain the biokey from the integration of the transformed minutiae and the private key. The result shows that the scheme has better performance on security and efficiency comparing with other irreversible function schemes.

Ultrasonic Fingerprinting of Structural Materials: Spent Nuclear Fuel Containers Case-Study

Science.gov (United States)

Sednev, D.; Lider, A.; Demyanuk, D.; Kroening, M.; Salchak, Y.

Nowadays, NDT is mainly focused on safety purposes, but it seems possible to apply those methods to provide national and IAEA safeguards. The containment of spent fuel in storage casks could be dramatically improved in case of development of so-called "smart" spent fuel storage and transfer casks. Such casks would have tamper indicating and monitoring/tracking features integrated directly into the cask design. The microstructure of the containers material as well as of the dedicated weld seam is applied to the lid and the cask body and provides a unique fingerprint of the full container, which can be reproducibly scanned by using an appropriate technique. The echo-sounder technique, which is the most commonly used method for material inspection, was chosen for this project. The main measuring parameter is acoustic noise, reflected from material's artefacts. The purpose is to obtain structural fingerprinting. Reference measurement and additional measurement results were compared. Obtained results have verified the appliance of structural fingerprint and the chosen control method. The successful authentication demonstrates the levels of the feature points' compliance exceeding the given threshold which differs considerably from the percentage of the concurrent points during authentication from other points. Since reproduction or doubling of the proposed unique identification characteristics is impossible at the current state science and technology, application of this technique is considered to identify the interference into the nuclear materials displacement with high accuracy.

Development of quality control system for fingerprint comparison processes

Directory of Open Access Journals (Sweden)

Shiquan Liu

2017-01-01

Full Text Available Fingerprint evidence played an important role in investigation, prosecution, and trial process due to the belief of its uniqueness and unchanged characteristics. However, in recent years, the science behind the process of fingerprint comparisons has been questioned. Main research questions have been focusing on the opaqueness within the comparison processes, subjective judgments, lack of universal standards, no error rate expression on final conclusions, and poor scientific fundamental research data. Facing the above-mentioned questions, this paper aims to suggest a quality control system (QCS for fingerprint comparison processes. This QCS is based on the use of software (PiAnoS and its technological features, being able to provide a data management model to increase the transparency and quality of fingerprint comparison processes.

Network-based Fingerprint Authentication System Using a Mobile Device

OpenAIRE

Zhang, Qihu

2016-01-01

Abstract—　Fingerprint-based user authentication is highly effective in networked services such as electronic payment, but conventional authentication solutions have problems in cost, usability and security. To resolve these problems, we propose a touch-less fingerprint authentication solution, in which a mobile device's built-in camera is used to capture fingerprint image, and then it is sent to the server to determine the identity of the user. We designed and implemented a prototype as an a...

Semantically transparent fingerprinting for right protection of digital cinema

Science.gov (United States)

Wu, Xiaolin

2003-06-01

Digital cinema, a new frontier and crown jewel of digital multimedia, has the potential of revolutionizing the science, engineering and business of movie production and distribution. The advantages of digital cinema technology over traditional analog technology are numerous and profound. But without effective and enforceable copyright protection measures, digital cinema can be more susceptible to widespread piracy, which can dampen or even prevent the commercial deployment of digital cinema. In this paper we propose a novel approach of fingerprinting each individual distribution copy of a digital movie for the purpose of tracing pirated copies back to their source. The proposed fingerprinting technique presents a fundamental departure from the traditional digital watermarking/fingerprinting techniques. Its novelty and uniqueness lie in a so-called semantic or subjective transparency property. The fingerprints are created by editing those visual and audio attributes that can be modified with semantic and subjective transparency to the audience. Semantically-transparent fingerprinting or watermarking is the most robust kind among all existing watermarking techniques, because it is content-based not sample-based, and semantically-recoverable not statistically-recoverable.

ULTRAVIOLET RAMAN SPECTRAL SIGNATURE ACQUISITION: UV RAMAN SPECTRAL FINGERPRINTS.

Energy Technology Data Exchange (ETDEWEB)

SEDLACEK,III, A.J.FINFROCK,C.

2002-09-01

As a member of the science-support part of the ITT-lead LISA development program, BNL is tasked with the acquisition of UV Raman spectral fingerprints and associated scattering cross-sections for those chemicals-of-interest to the program's sponsor. In support of this role, the present report contains the first installment of UV Raman spectral fingerprint data on the initial subset of chemicals. Because of the unique nature associated with the acquisition of spectral fingerprints for use in spectral pattern matching algorithms (i.e., CLS, PLS, ANN) great care has been undertaken to maximize the signal-to-noise and to minimize unnecessary spectral subtractions, in an effort to provide the highest quality spectral fingerprints. This report is divided into 4 sections. The first is an Experimental section that outlines how the Raman spectra are performed. This is then followed by a section on Sample Handling. Following this, the spectral fingerprints are presented in the Results section where the data reduction process is outlined. Finally, a Photographs section is included.

A Karnaugh-Map based fingerprint minutiae extraction method

Directory of Open Access Journals (Sweden)

Sunil Kumar Singla

2010-07-01

Full Text Available Fingerprint is one of the most promising method among all the biometric techniques and has been used for thepersonal authentication for a long time because of its wide acceptance and reliability. Features (Minutiae are extracted fromthe fingerprint in question and are compared with the features already stored in the database for authentication. Crossingnumber (CN is the most commonly used minutiae extraction method for fingerprints. In this paper, a new Karnaugh-Mapbased fingerprint minutiae extraction method has been proposed and discussed. In the proposed algorithm the 8 neighborsof a pixel in a 33 window are arranged as 8 bits of a byte and corresponding hexadecimal (hex value is calculated. Thesehex values are simplified using standard Karnaugh-Map (K-map technique to obtain the minimized logical expression.Experiments conducted on the FVC2002/Db1_a database reveals that the developed method is better than the crossingnumber (CN method.

Chemical characterization of fingerprints from adults and children

Energy Technology Data Exchange (ETDEWEB)

Buchanan, M.V.; Asano, K. [Oak Ridge National Lab., TN (United States); Bohanon, A. [Knoxville Police Dept., TN (United States)

1996-12-31

Observation that children`s fingerprints disappear from surfaces more quickly than adults`, initiated a study to characterize the chemical components in fingerprints. Samples were obtained from about 50 individuals ranging in age from 3 to 64 by extracting chemicals from the fingertips using rubbing alcohol. Using combined gas chromatography/mass spectrometry, a wide range of compounds were identified. Samples from children contained higher levels of relatively volatile free fatty acids, while those from adults had higher levels of less volatile long chain esters of fatty acids. These esters are thought to originate from sebaceous glands located on the face and levels of these compounds increase substantially after puberty. Also, other compounds were observed that could be used to develop improved methods for fingerprint detection at a crime scene. Further, observation of specific compounds raises the possibility of being able to identify personal traits (gender, habits, diseases, etc. ) via analysis of components in fingerprints and/or skin.

High Resolution Ultrasonic Method for 3D Fingerprint Representation in Biometrics

Science.gov (United States)

Maev, R. Gr.; Bakulin, E. Y.; Maeva, E. Y.; Severin, F. M.

Biometrics is an important field which studies different possible ways of personal identification. Among a number of existing biometric techniques fingerprint recognition stands alone - because very large database of fingerprints has already been acquired. Also, fingerprints are an important evidence that can be collected at a crime scene. Therefore, of all automated biometric techniques, especially in the field of law enforcement, fingerprint identification seems to be the most promising. Ultrasonic method of fingerprint imaging was originally introduced over a decade as the mapping of the reflection coefficient at the interface between the finger and a covering plate and has shown very good reliability and free from imperfections of previous two methods. This work introduces a newer development of the ultrasonic fingerprint imaging, focusing on the imaging of the internal structures of fingerprints (including sweat pores) with raw acoustic resolution of about 500 dpi (0.05 mm) using a scanning acoustic microscope to obtain images and acoustic data in the form of 3D data array. C-scans from different depths inside the fingerprint area of fingers of several volunteers were obtained and showed good contrast of ridges-and-valleys patterns and practically exact correspondence to the standard ink-and-paper prints of the same areas. Important feature reveled on the acoustic images was the clear appearance of the sweat pores, which could provide additional means of identification.

Defense of fake fingerprint attacks using a swept source laser optical coherence tomography setup

Science.gov (United States)

Meissner, Sven; Breithaupt, Ralph; Koch, Edmund

2013-03-01

The most established technique for the identification at biometric access control systems is the human fingerprint. While every human fingerprint is unique, fingerprints can be faked very easily by using thin layer fakes. Because commercial fingerprint scanners use only a two-dimensional image acquisition of the finger surface, they can only hardly differentiate between real fingerprints and fingerprint fakes applied on thin layer materials. A Swept Source OCT system with an A-line rate of 20 kHz and a lateral and axial resolution of approximately 13 μm, a centre wavelength of 1320 nm and a band width of 120 nm (FWHM) was used to acquire fingerprints and finger tips with overlying fakes. Three-dimensional volume stacks with dimensions of 4.5 mm x 4 mm x 2 mm were acquired. The layering arrangement of the imaged finger tips and faked finger tips was analyzed and subsequently classified into real and faked fingerprints. Additionally, sweat gland ducts were detected and consulted for the classification. The manual classification between real fingerprints and faked fingerprints results in almost 100 % correctness. The outer as well as the internal fingerprint can be recognized in all real human fingers, whereby this was not possible in the image stacks of the faked fingerprints. Furthermore, in all image stacks of real human fingers the sweat gland ducts were detected. The number of sweat gland ducts differs between the test persons. The typical helix shape of the ducts was observed. In contrast, in images of faked fingerprints we observe abnormal layer arrangements and no sweat gland ducts connecting the papillae of the outer fingerprint and the internal fingerprint. We demonstrated that OCT is a very useful tool to enhance the performance of biometric control systems concerning attacks by thin layer fingerprint fakes.

Non-destructive forensic latent fingerprint acquisition with chromatic white light sensors

Science.gov (United States)

Leich, Marcus; Kiltz, Stefan; Dittmann, Jana; Vielhauer, Claus

2011-02-01

Non-destructive latent fingerprint acquisition is an emerging field of research, which, unlike traditional methods, makes latent fingerprints available for additional verification or further analysis like tests for substance abuse or age estimation. In this paper a series of tests is performed to investigate the overall suitability of a high resolution off-the-shelf chromatic white light sensor for the contact-less and non-destructive latent fingerprint acquisition. Our paper focuses on scanning previously determined regions with exemplary acquisition parameter settings. 3D height field and reflection data of five different latent fingerprints on six different types of surfaces (HDD platter, brushed metal, painted car body (metallic and non-metallic finish), blued metal, veneered plywood) are experimentally studied. Pre-processing is performed by removing low-frequency gradients. The quality of the results is assessed subjectively; no automated feature extraction is performed. Additionally, the degradation of the fingerprint during the acquisition period is observed. While the quality of the acquired data is highly dependent on surface structure, the sensor is capable of detecting the fingerprint on all sample surfaces. On blued metal the residual material is detected; however, the ridge line structure dissolves within minutes after fingerprint placement.

Integrating Fingerprint Verification into the Smart Card-Based Healthcare Information System

Directory of Open Access Journals (Sweden)

Jin-Won Park

2009-01-01

Full Text Available As VLSI technology has been improved, a smart card employing 32-bit processors has been released, and more personal information such as medical, financial data can be stored in the card. Thus, it becomes important to protect personal information stored in the card. Verification of the card holder's identity using a fingerprint has advantages over the present practices of Personal Identification Numbers (PINs and passwords. However, the computational workload of fingerprint verification is much heavier than that of the typical PIN-based solution. In this paper, we consider three strategies to implement fingerprint verification in a smart card environment and how to distribute the modules of fingerprint verification between the smart card and the card reader. We first evaluate the number of instructions of each step of a typical fingerprint verification algorithm, and estimate the execution time of several cryptographic algorithms to guarantee the security/privacy of the fingerprint data transmitted in the smart card with the client-server environment. Based on the evaluation results, we analyze each scenario with respect to the security level and the real-time execution requirements in order to implement fingerprint verification in the smart card with the client-server environment.

Integrating Fingerprint Verification into the Smart Card-Based Healthcare Information System

Science.gov (United States)

Moon, Daesung; Chung, Yongwha; Pan, Sung Bum; Park, Jin-Won

2009-12-01

As VLSI technology has been improved, a smart card employing 32-bit processors has been released, and more personal information such as medical, financial data can be stored in the card. Thus, it becomes important to protect personal information stored in the card. Verification of the card holder's identity using a fingerprint has advantages over the present practices of Personal Identification Numbers (PINs) and passwords. However, the computational workload of fingerprint verification is much heavier than that of the typical PIN-based solution. In this paper, we consider three strategies to implement fingerprint verification in a smart card environment and how to distribute the modules of fingerprint verification between the smart card and the card reader. We first evaluate the number of instructions of each step of a typical fingerprint verification algorithm, and estimate the execution time of several cryptographic algorithms to guarantee the security/privacy of the fingerprint data transmitted in the smart card with the client-server environment. Based on the evaluation results, we analyze each scenario with respect to the security level and the real-time execution requirements in order to implement fingerprint verification in the smart card with the client-server environment.

Human matching performance of genuine crime scene latent fingerprints.

Science.gov (United States)

Thompson, Matthew B; Tangen, Jason M; McCarthy, Duncan J

2014-02-01

There has been very little research into the nature and development of fingerprint matching expertise. Here we present the results of an experiment testing the claimed matching expertise of fingerprint examiners. Expert (n = 37), intermediate trainee (n = 8), new trainee (n = 9), and novice (n = 37) participants performed a fingerprint discrimination task involving genuine crime scene latent fingerprints, their matches, and highly similar distractors, in a signal detection paradigm. Results show that qualified, court-practicing fingerprint experts were exceedingly accurate compared with novices. Experts showed a conservative response bias, tending to err on the side of caution by making more errors of the sort that could allow a guilty person to escape detection than errors of the sort that could falsely incriminate an innocent person. The superior performance of experts was not simply a function of their ability to match prints, per se, but a result of their ability to identify the highly similar, but nonmatching fingerprints as such. Comparing these results with previous experiments, experts were even more conservative in their decision making when dealing with these genuine crime scene prints than when dealing with simulated crime scene prints, and this conservatism made them relatively less accurate overall. Intermediate trainees-despite their lack of qualification and average 3.5 years experience-performed about as accurately as qualified experts who had an average 17.5 years experience. New trainees-despite their 5-week, full-time training course or their 6 months experience-were not any better than novices at discriminating matching and similar nonmatching prints, they were just more conservative. Further research is required to determine the precise nature of fingerprint matching expertise and the factors that influence performance. The findings of this representative, lab-based experiment may have implications for the way fingerprint examiners testify in

Comparing Categorical and Probabilistic Fingerprint Evidence.

Science.gov (United States)

Garrett, Brandon; Mitchell, Gregory; Scurich, Nicholas

2018-04-23

Fingerprint examiners traditionally express conclusions in categorical terms, opining that impressions do or do not originate from the same source. Recently, probabilistic conclusions have been proposed, with examiners estimating the probability of a match between recovered and known prints. This study presented a nationally representative sample of jury-eligible adults with a hypothetical robbery case in which an examiner opined on the likelihood that a defendant's fingerprints matched latent fingerprints in categorical or probabilistic terms. We studied model language developed by the U.S. Defense Forensic Science Center to summarize results of statistical analysis of the similarity between prints. Participant ratings of the likelihood the defendant left prints at the crime scene and committed the crime were similar when exposed to categorical and strong probabilistic match evidence. Participants reduced these likelihoods when exposed to the weaker probabilistic evidence, but did not otherwise discriminate among the prints assigned different match probabilities. © 2018 American Academy of Forensic Sciences.

Space-time patterns of trends in stratospheric constituents derived from UARS measurements

Science.gov (United States)

Randel, William J.; Wu, Fei; Russell, James M.; Waters, Joe

1999-02-01

The spatial and temporal behavior of low-frequency changes (trends) in stratospheric constituents measured by instruments on the Upper Atmosphere Research Satellite (UARS) during 1991-98 is investigated. The data include CH4, H2O, HF, HCl, O3, and NO2 from the Halogen Occultation Experiment (HALOE), and O3, ClO, and HNO3 from the Microwave Limb Sounder (MLS). Time series of global anomalies are analyzed by linear regression and empirical orthogonal function analysis. Each of the constituents show significant linear trends over at least some region of the stratosphere, and the spatial patterns exhibit coupling between the different species. Several of the constituents (namely CH4, H2O, HF, HCl, O3, and NO2) exhibit a temporal change in trend rates, with strong changes prior to 1996 and weaker (or reversed) trends thereafter. Positive trends are observed in upper stratospheric ClO, with a percentage rate during 1993-97 consistent with stratospheric HCl increases and with tropospheric chlorine emission rates. Significant negative trends in ozone in the tropical middle stratosphere are found in both HALOE and MLS data during 1993-97, together with positive trends in the tropics near 25 km. These trends are very different from the decadal-scale ozone trends observed since 1979, and this demonstrates the variability of trends calculated over short time periods. Positive trends in NO2 are found in the tropical middle stratosphere, and spatial coincidence to the observed ozone decreases suggests the ozone is responding to the NO2 increase. Significant negative trends in HNO3 are found in the lower stratosphere of both hemispheres. These coupled signatures offer a fingerprint of chemical evolution in the stratosphere for the UARS time frame.

Optical Methods in Fingerprint Imaging for Medical and Personality Applications.

Science.gov (United States)

Wang, Chia-Nan; Wang, Jing-Wein; Lin, Ming-Hsun; Chang, Yao-Lang; Kuo, Chia-Ming

2017-10-23

Over the years, analysis and induction of personality traits has been a topic for individual subjective conjecture or speculation, rather than a focus of inductive scientific analysis. This study proposes a novel framework for analysis and induction of personality traits. First, 14 personality constructs based on the "Big Five" personality factors were developed. Next, a new fingerprint image algorithm was used for classification, and the fingerprints were classified into eight types. The relationship between personality traits and fingerprint type was derived from the results of the questionnaire survey. After comparison of pre-test and post-test results, this study determined the induction ability of personality traits from fingerprint type. Experimental results showed that the left/right thumbprint type of a majority of subjects was left loop/right loop and that the personalities of individuals with this fingerprint type were moderate with no significant differences in the 14 personality constructs.

Enhancement of plant metabolite fingerprinting by machine learning.

Science.gov (United States)

Scott, Ian M; Vermeer, Cornelia P; Liakata, Maria; Corol, Delia I; Ward, Jane L; Lin, Wanchang; Johnson, Helen E; Whitehead, Lynne; Kular, Baldeep; Baker, John M; Walsh, Sean; Dave, Anuja; Larson, Tony R; Graham, Ian A; Wang, Trevor L; King, Ross D; Draper, John; Beale, Michael H

2010-08-01

Metabolite fingerprinting of Arabidopsis (Arabidopsis thaliana) mutants with known or predicted metabolic lesions was performed by (1)H-nuclear magnetic resonance, Fourier transform infrared, and flow injection electrospray-mass spectrometry. Fingerprinting enabled processing of five times more plants than conventional chromatographic profiling and was competitive for discriminating mutants, other than those affected in only low-abundance metabolites. Despite their rapidity and complexity, fingerprints yielded metabolomic insights (e.g. that effects of single lesions were usually not confined to individual pathways). Among fingerprint techniques, (1)H-nuclear magnetic resonance discriminated the most mutant phenotypes from the wild type and Fourier transform infrared discriminated the fewest. To maximize information from fingerprints, data analysis was crucial. One-third of distinctive phenotypes might have been overlooked had data models been confined to principal component analysis score plots. Among several methods tested, machine learning (ML) algorithms, namely support vector machine or random forest (RF) classifiers, were unsurpassed for phenotype discrimination. Support vector machines were often the best performing classifiers, but RFs yielded some particularly informative measures. First, RFs estimated margins between mutant phenotypes, whose relations could then be visualized by Sammon mapping or hierarchical clustering. Second, RFs provided importance scores for the features within fingerprints that discriminated mutants. These scores correlated with analysis of variance F values (as did Kruskal-Wallis tests, true- and false-positive measures, mutual information, and the Relief feature selection algorithm). ML classifiers, as models trained on one data set to predict another, were ideal for focused metabolomic queries, such as the distinctiveness and consistency of mutant phenotypes. Accessible software for use of ML in plant physiology is highlighted.

Multiple chromatographic fingerprinting and its application to the quality control of herbal medicines

International Nuclear Information System (INIS)

Fan Xiaohui; Cheng Yiyu; Ye Zhengliang; Lin Ruichao; Qian Zhongzhi

2006-01-01

Recently, chromatographic fingerprinting has become one of the most powerful approaches to quality control of herbal medicines. However, the performance of reported chromatographic fingerprinting constructed by single chromatogram sometimes turns out to be inadequate for complex herbal medicines, such as multi-herb botanical drug products. In this study, multiple chromatographic fingerprinting, which consists of more than one chromatographic fingerprint and represents the whole characteristics of chemical constitutions of the complex medicine, is proposed as a potential strategy in this complicated case. As a typical example, a binary chromatographic fingerprinting of 'Danshen Dropping Pill' (DSDP), the best-sold traditional Chinese medicine in China, was developed. First, two HPLC fingerprints that, respectively, represent chemical characteristics of depsides and saponins of DSDP were developed, which were used to construct binary chromatographic fingerprints of DSDP. Moreover, the authentication and validation of the binary fingerprints were performed. Then, a data-level information fusion method was employed to capture the chemical information encoded in two chromatographic fingerprints. Based on the fusion results, the lot-to-lot consistency and frauds can be determined either using similarity measure or by chemometrics approach. The application of binary chromatographic fingerprinting to consistency assessment and frauds detection of DSDP clearly demonstrated that the proposed method was a powerful approach to quality control of complex herbal medicines

Diversity of DNA fingerprints of Mycobacterium tuberculosis isolates in the United States.

Science.gov (United States)

Yang, Z; Barnes, P F; Chaves, F; Eisenach, K D; Weis, S E; Bates, J H; Cave, M D

1998-04-01

To investigate the diversity of IS6110 fingerprints of Mycobacterium tuberculosis isolates in the United States and to determine if matching IS6110 fingerprints represent recent interstate tuberculosis transmission, we performed restriction fragment length polymorphism analysis of M. tuberculosis isolates from 1,326 patients in three geographically separated states. Seven hundred ninety-five different IS6110 fingerprint patterns were generated, and pattern diversity was similar in each state. Ninety-six percent of the fingerprint patterns were observed in only one state, demonstrating that most IS6110 fingerprint patterns are confined to a single geographic location. Of the IS6110 fingerprint patterns that were shared by isolates from more than one state, most isolates with 1 to 5 IS6110 copies were separable by pTBN12 fingerprinting whereas those with > 15 copies were not. One high-copy-number M. tuberculosis strain had identical IS6110 and pTBN12 fingerprints and included 57 isolates from three states. Epidemiological data demonstrated significant recent transmission of tuberculosis within each city but not among the states. This suggests that identical fingerprints of isolates from geographically separate locations most likely reflect interstate tuberculosis transmission in the past, with subsequent intrastate spread of disease. Further evaluation of M. tuberculosis strains that cause outbreaks in different geographic locations will provide insight into the epidemiological and bacteriological factors that facilitate the spread of tuberculosis.

Fast Fingerprint Database Maintenance for Indoor Positioning Based on UGV SLAM

Directory of Open Access Journals (Sweden)

Jian Tang

2015-03-01

Full Text Available Indoor positioning technology has become more and more important in the last two decades. Utilizing Received Signal Strength Indicator (RSSI fingerprints of Signals of OPportunity (SOP is a promising alternative navigation solution. However, as the RSSIs vary during operation due to their physical nature and are easily affected by the environmental change, one challenge of the indoor fingerprinting method is maintaining the RSSI fingerprint database in a timely and effective manner. In this paper, a solution for rapidly updating the fingerprint database is presented, based on a self-developed Unmanned Ground Vehicles (UGV platform NAVIS. Several SOP sensors were installed on NAVIS for collecting indoor fingerprint information, including a digital compass collecting magnetic field intensity, a light sensor collecting light intensity, and a smartphone which collects the access point number and RSSIs of the pre-installed WiFi network. The NAVIS platform generates a map of the indoor environment and collects the SOPs during processing of the mapping, and then the SOP fingerprint database is interpolated and updated in real time. Field tests were carried out to evaluate the effectiveness and efficiency of the proposed method. The results showed that the fingerprint databases can be quickly created and updated with a higher sampling frequency (5Hz and denser reference points compared with traditional methods, and the indoor map can be generated without prior information. Moreover, environmental changes could also be detected quickly for fingerprint indoor positioning.

Optical Methods in Fingerprint Imaging for Medical and Personality Applications

Directory of Open Access Journals (Sweden)

Chia-Nan Wang

2017-10-01

Full Text Available Over the years, analysis and induction of personality traits has been a topic for individual subjective conjecture or speculation, rather than a focus of inductive scientific analysis. This study proposes a novel framework for analysis and induction of personality traits. First, 14 personality constructs based on the “Big Five” personality factors were developed. Next, a new fingerprint image algorithm was used for classification, and the fingerprints were classified into eight types. The relationship between personality traits and fingerprint type was derived from the results of the questionnaire survey. After comparison of pre-test and post-test results, this study determined the induction ability of personality traits from fingerprint type. Experimental results showed that the left/right thumbprint type of a majority of subjects was left loop/right loop and that the personalities of individuals with this fingerprint type were moderate with no significant differences in the 14 personality constructs.

[HPLC characteristic fingerprints of sedi linearis herba and sedi herba].

Science.gov (United States)

Lu, Lan-Qing; Mei, Qing; Wan, Ding-Rong; Yang, Xin-Zhou; Qiao, Shu; Zhao, Yu-Dan

2014-04-01

To study HPLC characteristic fingerprint of Sedum lineare from different harvest periods, and to compare with its related species Sedum sarmentosum. The HPLC fingerprints of Sedum lineare from different collecting periods were established and compared with Sedum sarmentosum by the same detection method. Hyperin, isoquercitrin and astragaloside were identified from the HPLC fingerprint of Sedum lineare. The fingerprint of Sedum lineare growing in the same area but different environment were basically identical; while there were remarkable differences of Sedum lineare growing in the same place but from different harvest periods, with the area of most common peaks changing from little to great, and slightly different peak number. The HPLC fingerprint of the two Sedum species had four common peaks, but could be distinguished from each other. The optimal harvest period of these two species should be full-bloom stage. The established method can provide reference for identification and quality analysis of Sedum lineare.

Identification and Quality Assessment of Chrysanthemum Buds by CE Fingerprinting

Directory of Open Access Journals (Sweden)

Xiaoping Xing

2015-01-01

Full Text Available A simple and efficient fingerprinting method for chrysanthemum buds was developed with the aim of establishing a quality control protocol based on biochemical makeup. Chrysanthemum bud samples were successively extracted by water and alcohol. The fingerprints of the chrysanthemum buds samples were obtained using capillary electrophoresis and electrochemical detection (CE-ED employing copper and carbon working electrodes to capture all of the chemical information. 10 batches of chrysanthemum buds were collected from different regions and various factories to establish the baseline fingerprint. The experimental data of 10 batches electropherogram buds by CE were analyzed by correlation coefficient and the included angle cosine methods. A standard chrysanthemum bud fingerprint including 24 common peaks was established, 12 from each electrode, which was successfully applied to identify and distinguish between chrysanthemum buds from 2 other chrysanthemum species. These results demonstrate that fingerprint analysis can be used as an important criterion for chrysanthemum buds quality control.

Optical Methods in Fingerprint Imaging for Medical and Personality Applications

Science.gov (United States)

Wang, Jing-Wein; Lin, Ming-Hsun; Chang, Yao-Lang; Kuo, Chia-Ming

2017-01-01

Over the years, analysis and induction of personality traits has been a topic for individual subjective conjecture or speculation, rather than a focus of inductive scientific analysis. This study proposes a novel framework for analysis and induction of personality traits. First, 14 personality constructs based on the “Big Five” personality factors were developed. Next, a new fingerprint image algorithm was used for classification, and the fingerprints were classified into eight types. The relationship between personality traits and fingerprint type was derived from the results of the questionnaire survey. After comparison of pre-test and post-test results, this study determined the induction ability of personality traits from fingerprint type. Experimental results showed that the left/right thumbprint type of a majority of subjects was left loop/right loop and that the personalities of individuals with this fingerprint type were moderate with no significant differences in the 14 personality constructs. PMID:29065556

A tree based method for the rapid screening of chemical fingerprints

DEFF Research Database (Denmark)

Kristensen, Thomas Greve; Nielsen, Jesper; Pedersen, Christian Nørgaard Storm

2009-01-01

The fingerprint of a molecule is a bitstring based on its structure, constructed such that structurally similar molecules will have similar fingerprints. Molecular fingerprints can be used in an initial phase for identifying novel drug candidates by screening large databases for molecules......: the kD grid and the Multibit tree. The kD grid is based on splitting the fingerprints into k shorter bitstrings and utilising these to compute bounds on the similarity of the complete bitstrings. The Multibit tree uses hierarchical clustering and similarity within each cluster to compute similar bounds...

Oriented diffusion filtering for enhancing low-quality fingerprint images

KAUST Repository

Gottschlich, C.; Schönlieb, C.-B.

2012-01-01

To enhance low-quality fingerprint images, we present a novel method that first estimates the local orientation of the fingerprint ridge and valley flow and next performs oriented diffusion filtering, followed by a locally adaptive contrast enhancement step. By applying the authors' new approach to low-quality images of the FVC2004 fingerprint databases, the authors are able to show its competitiveness with other state-of-the-art enhancement methods for fingerprints like curved Gabor filtering. A major advantage of oriented diffusion filtering over those is its computational efficiency. Combining oriented diffusion filtering with curved Gabor filters led to additional improvements and, to the best of the authors' knowledge, the lowest equal error rates achieved so far using MINDTCT and BOZORTH3 on the FVC2004 databases. The recognition performance and the computational efficiency of the method suggest to include oriented diffusion filtering as a standard image enhancement add-on module for real-time fingerprint recognition systems. In order to facilitate the reproduction of these results, an implementation of the oriented diffusion filtering for Matlab and GNU Octave is made available for download. © 2012 The Institution of Engineering and Technology.

Oriented diffusion filtering for enhancing low-quality fingerprint images

KAUST Repository

Gottschlich, C.

2012-01-01

To enhance low-quality fingerprint images, we present a novel method that first estimates the local orientation of the fingerprint ridge and valley flow and next performs oriented diffusion filtering, followed by a locally adaptive contrast enhancement step. By applying the authors\\' new approach to low-quality images of the FVC2004 fingerprint databases, the authors are able to show its competitiveness with other state-of-the-art enhancement methods for fingerprints like curved Gabor filtering. A major advantage of oriented diffusion filtering over those is its computational efficiency. Combining oriented diffusion filtering with curved Gabor filters led to additional improvements and, to the best of the authors\\' knowledge, the lowest equal error rates achieved so far using MINDTCT and BOZORTH3 on the FVC2004 databases. The recognition performance and the computational efficiency of the method suggest to include oriented diffusion filtering as a standard image enhancement add-on module for real-time fingerprint recognition systems. In order to facilitate the reproduction of these results, an implementation of the oriented diffusion filtering for Matlab and GNU Octave is made available for download. © 2012 The Institution of Engineering and Technology.

Aspects of physicochemical methods for the detection of latent fingerprints

International Nuclear Information System (INIS)

Knowles, A.M.

1978-01-01

This paper reviews physicochemical methods of detecting latent finger-prints on a wide range of materials commonly found at the scene of a crime, with particular emphasis placed on the newer autoradiographic techniques. This is set against a description of studies on the fundamental nature of the latent fingerprint and its host substrate, with a brief review of the history of reagents used in latent fingerprint examination. (author)

Multiple chromatographic fingerprinting and its application to the quality control of herbal medicines

Energy Technology Data Exchange (ETDEWEB)

Fan Xiaohui [Pharmaceutical Informatics Institute, College of Pharmaceutical Sciences, Zhejiang University, Hangzhou 310027 (China); Cheng Yiyu [Pharmaceutical Informatics Institute, College of Pharmaceutical Sciences, Zhejiang University, Hangzhou 310027 (China)]. E-mail: chengyy@zju.edu.cn; Ye Zhengliang [Pharmaceutical Informatics Institute, College of Pharmaceutical Sciences, Zhejiang University, Hangzhou 310027 (China); Lin Ruichao [National Institute for the Control of Pharmaceutical and Biological Products, Beijing 100050 (China); Qian Zhongzhi [Committee of Chinese Pharmacopoeia, Beijing 100061 (China)

2006-01-12

Recently, chromatographic fingerprinting has become one of the most powerful approaches to quality control of herbal medicines. However, the performance of reported chromatographic fingerprinting constructed by single chromatogram sometimes turns out to be inadequate for complex herbal medicines, such as multi-herb botanical drug products. In this study, multiple chromatographic fingerprinting, which consists of more than one chromatographic fingerprint and represents the whole characteristics of chemical constitutions of the complex medicine, is proposed as a potential strategy in this complicated case. As a typical example, a binary chromatographic fingerprinting of 'Danshen Dropping Pill' (DSDP), the best-sold traditional Chinese medicine in China, was developed. First, two HPLC fingerprints that, respectively, represent chemical characteristics of depsides and saponins of DSDP were developed, which were used to construct binary chromatographic fingerprints of DSDP. Moreover, the authentication and validation of the binary fingerprints were performed. Then, a data-level information fusion method was employed to capture the chemical information encoded in two chromatographic fingerprints. Based on the fusion results, the lot-to-lot consistency and frauds can be determined either using similarity measure or by chemometrics approach. The application of binary chromatographic fingerprinting to consistency assessment and frauds detection of DSDP clearly demonstrated that the proposed method was a powerful approach to quality control of complex herbal medicines.

A Large-Scale Study of Fingerprint Matching Systems for Sensor Interoperability Problem

Directory of Open Access Journals (Sweden)

Helala AlShehri

2018-03-01

Full Text Available The fingerprint is a commonly used biometric modality that is widely employed for authentication by law enforcement agencies and commercial applications. The designs of existing fingerprint matching methods are based on the hypothesis that the same sensor is used to capture fingerprints during enrollment and verification. Advances in fingerprint sensor technology have raised the question about the usability of current methods when different sensors are employed for enrollment and verification; this is a fingerprint sensor interoperability problem. To provide insight into this problem and assess the status of state-of-the-art matching methods to tackle this problem, we first analyze the characteristics of fingerprints captured with different sensors, which makes cross-sensor matching a challenging problem. We demonstrate the importance of fingerprint enhancement methods for cross-sensor matching. Finally, we conduct a comparative study of state-of-the-art fingerprint recognition methods and provide insight into their abilities to address this problem. We performed experiments using a public database (FingerPass that contains nine datasets captured with different sensors. We analyzed the effects of different sensors and found that cross-sensor matching performance deteriorates when different sensors are used for enrollment and verification. In view of our analysis, we propose future research directions for this problem.

A Large-Scale Study of Fingerprint Matching Systems for Sensor Interoperability Problem.

Science.gov (United States)

AlShehri, Helala; Hussain, Muhammad; AboAlSamh, Hatim; AlZuair, Mansour

2018-03-28

The fingerprint is a commonly used biometric modality that is widely employed for authentication by law enforcement agencies and commercial applications. The designs of existing fingerprint matching methods are based on the hypothesis that the same sensor is used to capture fingerprints during enrollment and verification. Advances in fingerprint sensor technology have raised the question about the usability of current methods when different sensors are employed for enrollment and verification; this is a fingerprint sensor interoperability problem. To provide insight into this problem and assess the status of state-of-the-art matching methods to tackle this problem, we first analyze the characteristics of fingerprints captured with different sensors, which makes cross-sensor matching a challenging problem. We demonstrate the importance of fingerprint enhancement methods for cross-sensor matching. Finally, we conduct a comparative study of state-of-the-art fingerprint recognition methods and provide insight into their abilities to address this problem. We performed experiments using a public database (FingerPass) that contains nine datasets captured with different sensors. We analyzed the effects of different sensors and found that cross-sensor matching performance deteriorates when different sensors are used for enrollment and verification. In view of our analysis, we propose future research directions for this problem.

Analysis of cellular and extracellular DNA in fingerprints

Energy Technology Data Exchange (ETDEWEB)

Button, Julie M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2014-09-09

It has been previously shown that DNA can be recovered from latent fingerprints left on various surfaces [R. A. H. van Oorschot and M. K. Jones, Nature 387, 767 (1997)]. However, the source of the DNA, extracellular versus cellular origin, is difficult to determine. If the DNA is cellular, it is believed to belong to skin cells while extracellular DNA is believed to originate from body fluids such as sweat [D. J. Daly et. al, Forensic Sci. Int. Genet. 6, 41-46 (2012); V. V. Vlassov et. al, BioEssays 29, 654-667 (2007)]. The origin of the DNA in fingerprints has implications for processing and interpretation of forensic evidence. The determination of the origin of DNA in fingerprints is further complicated by the fact that the DNA in fingerprints tends to be at a very low quantity [R. A. H. van Oorschot and M. K. Jones, Nature 387, 767 (1997)]. This study examined fingerprints from five volunteers left on sterilized glass slides and plastic pens. Three fingerprints were left on each glass slide (thumb, index, and middle fingers) while the pens were held as if one was writing with them. The DNA was collected from the objects using the wet swabbing technique (TE buffer). Following collection, the cellular and extracellular components of each sample were separated using centrifugation and an acoustofluidics system. Centrifugation is still the primary separation technique utilized in forensics laboratories, while acoustic focusing uses sound waves to focus large particles (cells) into low pressure nodes, separating them from the rest of the sample matrix. After separation, all samples were quantified using real-time quantitative PCR (qPCR). The overall trend is that there is more DNA in the extracellular fractions than cellular fractions for both centrifugation and acoustofluidic processing. Additionally, more DNA was generally collected from the pen samples than the samples left on glass slides.

Fast probabilistic file fingerprinting for big data.

Science.gov (United States)

Tretyakov, Konstantin; Laur, Sven; Smant, Geert; Vilo, Jaak; Prins, Pjotr

2013-01-01

Biological data acquisition is raising new challenges, both in data analysis and handling. Not only is it proving hard to analyze the data at the rate it is generated today, but simply reading and transferring data files can be prohibitively slow due to their size. This primarily concerns logistics within and between data centers, but is also important for workstation users in the analysis phase. Common usage patterns, such as comparing and transferring files, are proving computationally expensive and are tying down shared resources. We present an efficient method for calculating file uniqueness for large scientific data files, that takes less computational effort than existing techniques. This method, called Probabilistic Fast File Fingerprinting (PFFF), exploits the variation present in biological data and computes file fingerprints by sampling randomly from the file instead of reading it in full. Consequently, it has a flat performance characteristic, correlated with data variation rather than file size. We demonstrate that probabilistic fingerprinting can be as reliable as existing hashing techniques, with provably negligible risk of collisions. We measure the performance of the algorithm on a number of data storage and access technologies, identifying its strengths as well as limitations. Probabilistic fingerprinting may significantly reduce the use of computational resources when comparing very large files. Utilisation of probabilistic fingerprinting techniques can increase the speed of common file-related workflows, both in the data center and for workbench analysis. The implementation of the algorithm is available as an open-source tool named pfff, as a command-line tool as well as a C library. The tool can be downloaded from http://biit.cs.ut.ee/pfff.

[HPTLC fingerprint analysis of andrographolides from Andrographis paniculata].

Science.gov (United States)

Shao, Yan-Hua; Wang, Jian-Gang; Lai, Xiao-Ping; Wu, Xiang-Wei; Ding, Ping

2014-02-01

To establish the high-performance thin layer chromatography (HPTLC) fingerprint of andrographolides from Andrographis paniculata, and to valuate the fingerprint similarity of samples from different habitats, markets, used parts and so on. Chromatographic conditions were as follows: stationary phase: precoated HPTLC GF254 silica-gel plate (20 cm x 10 cm); developing solvent system: chloroform-toluene-methanol (80:10:15); Relative humidity: 42%; Color development reagent: 5% H2SO4 ethanolic solution, heating at 105 degrees C and observing the fluorescent chromatogram in a UV cabinet at 366 nm. The common patterns of HPTLC fingerprint were obtained through CHROMAP 1.5 solution software. The HPTLC fingerprint of andrographolides was consisted of 9 characteristic peaks (fluorescent bands) including andrographolide, neoandrographolide and dehydroandrographolide which were chemical reference substances. The investigation and analysis of 51 batches of Andrographis paniculata showed that there were remarkable differences among different samples, so was the content of andrographolide and total lactones. This method is simple and rapid, which can serve as an effective identification and quality assessment method for Andrographis paniculata.

Partial Fingerprint Image Enhancement using Region Division Technique and Morphological Transform

International Nuclear Information System (INIS)

Ahmad, A.; Arshad, I.; Raja, G.

2015-01-01

Fingerprints are the most renowned biometric trait for identification and verification. The quality of fingerprint image plays a vital role in feature extraction and matching. Existing algorithms work well for good quality fingerprint images and fail for partial fingerprint images as they are obtained from excessively dry fingers or affected by disease resulting in broken ridges. We propose an algorithm to enhance partial fingerprint images using morphological operatins with region division technique. The proposed method divides low quality image into six regions from top to bottom. Morphological operations choose an appropriate Structuring Element (SE) that joins broken ridges and thus enhance the image for further processing. The proposed method uses SE line with suitable angle theta and radius r in each region based on the orientation of the ridges. The algorithm is applied to 14 low quality fingerprint images from FVC-2002 database. Experimental results show that percentage accuracy has been improved using the proposed algorithm. The manual markup has been reduced and accuracy of 76.16% with Equal Error Rate (EER) of 3.16% is achieved. (author)

Novel fingerprint re-alignment solution that uses the TFCP as a reference

CSIR Research Space (South Africa)

Msiza, IS

2011-08-01

Full Text Available , independent, and efficient for all types of fingerprints. It, in particular, is useful when dealing with the type of fingerprints that belong to the Plain Arch (PA) fingerprint class. The credibility of this proposed solution is interrogated through its...

Laser speckle decorrelation for fingerprint acquisition

International Nuclear Information System (INIS)

Schirripa Spagnolo, Giuseppe; Cozzella, Lorenzo

2012-01-01

Biometry is gaining popularity as a physical security approach in situations where a high level of security is necessary. Currently, biometric solutions are embedded in a very large and heterogeneous group of applications. One of the most sensible is for airport security access to boarding gates. More airports are introducing biometric solutions based on face, fingerprint or iris recognition for passenger identification. In particular, fingerprints are the most widely used biometric, and they are mandatorily included in electronic identification documents. One important issue, which is difficult to address in traditional fingerprint acquisition systems, is preventing contact between subsequent users; sebum, which can be a potential vector for contagious diseases. Currently, non-contact devices are used to overcome this problem. In this paper, a new contact device based on laser speckle decorrelation is presented. Our system has the advantage of being compact and low-cost compared with an actual contactless system, allowing enhancement of the sebum pattern imaging contrast in a simple and low-cost way. Furthermore, it avoids the spreading of contagious diseases. (paper)

Construction and bootstrap analysis of DNA fingerprinting-based phylogenetic trees with the freeware program FreeTree: application to trichomonad parasites

Czech Academy of Sciences Publication Activity Database

Hampl, V.; Pavlíček, Adam; Flegr, J.

2001-01-01

Roč. 51, - (2001), s. 731-735 ISSN 1466-5026 R&D Projects: GA MŠk VS96142 Grant - others:GA UK(XC) 107/1998 Keywords : FreeTree software * fingerprinting * Trichomonas Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 2.004, year: 2001

Efficient and Secure Fingerprint Verification for Embedded Devices

Directory of Open Access Journals (Sweden)

Sakiyama Kazuo

2006-01-01

Full Text Available This paper describes a secure and memory-efficient embedded fingerprint verification system. It shows how a fingerprint verification module originally developed to run on a workstation can be transformed and optimized in a systematic way to run real-time on an embedded device with limited memory and computation power. A complete fingerprint recognition module is a complex application that requires in the order of 1000 M unoptimized floating-point instruction cycles. The goal is to run both the minutiae extraction and the matching engines on a small embedded processor, in our case a 50 MHz LEON-2 softcore. It does require optimization and acceleration techniques at each design step. In order to speed up the fingerprint signal processing phase, we propose acceleration techniques at the algorithm level, at the software level to reduce the execution cycle number, and at the hardware level to distribute the system work load. Thirdly, a memory trace map-based memory reduction strategy is used for lowering the system memory requirement. Lastly, at the hardware level, it requires the development of specialized coprocessors. As results of these optimizations, we achieve a 65% reduction on the execution time and a 67% reduction on the memory storage requirement for the minutiae extraction process, compared against the reference implementation. The complete operation, that is, fingerprint capture, feature extraction, and matching, can be done in real-time of less than 4 seconds

Piezoelectric micromachined ultrasonic transducers for fingerprint sensing

Science.gov (United States)

Lu, Yipeng

Fingerprint identification is the most prevalent biometric technology due to its uniqueness, universality and convenience. Over the past two decades, a variety of physical mechanisms have been exploited to capture an electronic image of a human fingerprint. Among these, capacitive fingerprint sensors are the ones most widely used in consumer electronics because they are fabricated using conventional complementary metal oxide semiconductor (CMOS) integrated circuit technology. However, capacitive fingerprint sensors are extremely sensitive to finger contamination and moisture. This thesis will introduce an ultrasonic fingerprint sensor using a PMUT array, which offers a potential solution to this problem. In addition, it has the potential to increase security, as it allows images to be collected at various depths beneath the epidermis, providing images of the sub-surface dermis layer and blood vessels. Firstly, PMUT sensitivity is maximized by optimizing the layer stack and electrode design, and the coupling coefficient is doubled via series transduction. Moreover, a broadband PMUT with 97% fractional bandwidth is achieved by utilizing a thinner structure excited at two adjacent mechanical vibration modes with overlapping bandwidth. In addition, we proposed waveguide PMUTs, which function to direct acoustic waves, confine acoustic energy, and provide mechanical protection for the PMUT array. Furthermore, PMUT arrays were fabricated with different processes to form the membrane, including front-side etching with a patterned sacrificial layer, front-side etching with additional anchor, cavity SOI wafers and eutectic bonding. Additionally, eutectic bonding allows the PMUT to be integrated with CMOS circuits. PMUTs were characterized in the mechanical, electrical and acoustic domains. Using transmit beamforming, a narrow acoustic beam was achieved, and high-resolution (sub-100 microm) and short-range (~1 mm) pulse-echo ultrasonic imaging was demonstrated using a steel

Ridge Width Correlations between Inked Prints and Powdered Latent Fingerprints.

Science.gov (United States)

De Alcaraz-Fossoul, Josep; Barrot-Feixat, Carme; Zapico, Sara C; Mancenido, Michelle; Broatch, Jennifer; Roberts, Katherine A; Carreras-Marin, Clara; Tasker, Jack

2017-10-03

A methodology to estimate the time of latent fingerprint deposition would be of great value to law enforcement and courts. It has been observed that ridge topography changes as latent prints age, including the widths of ridges that could be measured as a function of time. Crime suspects are commonly identified using fingerprint databases that contain reference inked tenprints (flat and rolled impressions). These can be of interest in aging studies as they provide baseline information relating to the original (nonaged) ridges' widths. In practice, the age of latent fingerprints could be estimated following a comparison process between the evidentiary aged print and the corresponding reference inked print. The present article explores possible correlations between inked and fresh latent fingerprints deposited on different substrates and visualized with TiO 2 . The results indicate that the ridge width of flat inked prints is most similar to fresh latent fingerprints , and these should be used as the comparison standard for future aging studies. © 2017 American Academy of Forensic Sciences.

Multifragment alleles in DNA fingerprints of the parrot, Amazona ventralis

Science.gov (United States)

Brock, M.K.; White, B.N.

1991-01-01

Human DNA probes that identify variable numbers of tandem repeat loci are being used to generate DNA fingerprints in many animal and plant species. In most species the majority of the sc rable autoradiographic bands of the DNA fingerprint represent alleles from numerous unlinked loci. This study was initiated to use DNA fingerprints to determine the amount of band-sharing among captive Hispaniolan parrots (Amazona ventralis) with known genetic relationships. This would form the data base to examine DNA fingerprints of the closely related and endangered Puerto Rican parrot (A. vittata) and to estimate the degree of inbreeding in the relic population. We found by segregation analysis of the bands scored in the DNA fingerprints of the Hispaniolan parrots that there may be as few as two to five loci identified by the human 33.15 probe. Furthermore, at one locus we identified seven alleles, one of which is represented by as many as 19 cosegregating bands. It is unknown how common multiband alleles might be in natural populations, and their existence will cause problems in the assessment of relatedness by band-sharing analysis. We believe, therefore, that a pedigree analysis should be included in all DNA fingerprinting studies, where possible, in order to estimate the number of loci identified by a minisatellite DNA probe and to examine the nature of their alleles.

Comparison of Powder Dusting and Cyanoacrylate Fuming Techniques in Retrieving Latent Fingerprint Exposed to Environment Conditions

International Nuclear Information System (INIS)

Mayalvanan, Y.; Sri Pawita Albakri Amir Hamzah; Chuan, L.L.; Muhamad Hilmi Baba; Amidon Anan

2014-01-01

Latent fingerprints are one of the best evidence to prove the presence of an individuals presence at the crime scene. There are many techniques available for a successful fingerprint lifting. Two of the most common ones are fingerprint powder dusting and cyanoacrylate fuming. This research aims to compare both techniques and determine which has a higher success rate in retrieving fingerprints exposed to local environmental conditions for three days. Fingerprint samples were collected from 18 subjects on glass, perspex and aluminium slides. These samples were then exposed to local environmental conditions for three days. The fingerprints were then developed using the aforementioned techniques. Based on the results, it can be safely said that, fuming results in clearer fingerprints and more minutiae can be found from the retrieved fingerprints even with exposure to less than optimum local conditions. This proves that fuming is a better fingerprint lifting method to resolve latent fingerprint compared to powder dusting. Surface on which the fingerprint is retrieved from influences the quality of clarity of a latent fingerprint. (author)

Quality improvement of fingerprints of decayed corpses by local thanatopractical processing (Thanatoprint

Directory of Open Access Journals (Sweden)

Gahr, Britta

2013-11-01

Full Text Available Thanatopractical processing allows morphological reconstruction of even advanced decayed bodies. By extracting fluids from the body’s tissue antemortem tenseness and volume can be restored. If bodies are partly subject to thanatopractical processing in the hand region (“Thanatoprint”, fingerprints of high quality can be gathered even in cases of advanced decay. Without this treatment fingerprinting can be extremely difficult, if not impossible. Thanatopractical processing could be applied successfully in cases of partial to subtotal detachment of the epidermis as well. In an interdisciplinary study 400 fingerprints of bodies in various states of decay were examined after application of Thanatoprint. In 76.75% fingerprints were applicable for data entry into AFIS (Automated Fingerprint Identification System; another 11.00% of the fingerprints could be used for the process of non-elimination. Further advantages of the method are low invasivity while maintaining the integrity of the corpse, less time- and material requirement as well as its long-lasting effect.

Distortion Estimation in Compressed Music Using Only Audio Fingerprints

NARCIS (Netherlands)

Doets, P.J.O.; Lagendijk, R.L.

2008-01-01

An audio fingerprint is a compact yet very robust representation of the perceptually relevant parts of an audio signal. It can be used for content-based audio identification, even when the audio is severely distorted. Audio compression changes the fingerprint slightly. We show that these small

A preliminary study of DTI Fingerprinting on stroke analysis.

Science.gov (United States)

Ma, Heather T; Ye, Chenfei; Wu, Jun; Yang, Pengfei; Chen, Xuhui; Yang, Zhengyi; Ma, Jingbo

2014-01-01

DTI (Diffusion Tensor Imaging) is a well-known MRI (Magnetic Resonance Imaging) technique which provides useful structural information about human brain. However, the quantitative measurement to physiological variation of subtypes of ischemic stroke is not available. An automatically quantitative method for DTI analysis will enhance the DTI application in clinics. In this study, we proposed a DTI Fingerprinting technology to quantitatively analyze white matter tissue, which was applied in stroke classification. The TBSS (Tract Based Spatial Statistics) method was employed to generate mask automatically. To evaluate the clustering performance of the automatic method, lesion ROI (Region of Interest) is manually drawn on the DWI images as a reference. The results from the DTI Fingerprinting were compared with those obtained from the reference ROIs. It indicates that the DTI Fingerprinting could identify different states of ischemic stroke and has promising potential to provide a more comprehensive measure of the DTI data. Further development should be carried out to improve DTI Fingerprinting technology in clinics.

Transparent Fingerprint Sensor System for Large Flat Panel Display.

Science.gov (United States)

Seo, Wonkuk; Pi, Jae-Eun; Cho, Sung Haeung; Kang, Seung-Youl; Ahn, Seong-Deok; Hwang, Chi-Sun; Jeon, Ho-Sik; Kim, Jong-Uk; Lee, Myunghee

2018-01-19

In this paper, we introduce a transparent fingerprint sensing system using a thin film transistor (TFT) sensor panel, based on a self-capacitive sensing scheme. An armorphousindium gallium zinc oxide (a-IGZO) TFT sensor array and associated custom Read-Out IC (ROIC) are implemented for the system. The sensor panel has a 200 × 200 pixel array and each pixel size is as small as 50 μm × 50 μm. The ROIC uses only eight analog front-end (AFE) amplifier stages along with a successive approximation analog-to-digital converter (SAR ADC). To get the fingerprint image data from the sensor array, the ROIC senses a capacitance, which is formed by a cover glass material between a human finger and an electrode of each pixel of the sensor array. Three methods are reviewed for estimating the self-capacitance. The measurement result demonstrates that the transparent fingerprint sensor system has an ability to differentiate a human finger's ridges and valleys through the fingerprint sensor array.

Examination of Zinc Oxide Nanoparticles as a Fluorescent Fingerprint Detection Powder

International Nuclear Information System (INIS)

Tun Tun Lin

2010-12-01

Detection of latent fingerprint was performed using zinc oxide nanoparticles which were produced by simple and efficient method in aqueous media from zinc nitrate. Synthesized ZnO nanoparticles were characterized by XRD, SEM and AFM for ZnO purification and particle size examination. In this paper an effort has been made to compare the results of using ZnO nanoparticles and conventional fingerprint powders such as ZnO bulk powder, CaO, TiO2, printer toner powder and graphite. Fingerprints on different materials were also examined by the use of ZnO and Graphite powder, which is currently used in the Central Intelligence Department of Myanmar Police Force.From this research, it was observed that zinc oxide nanoparticles powder produced a much clearer picture of the fingerprints, compared to conventional powders and it has very good quality at sticking to the fingerprint residue but not to the background surface.

AN APPROACH TO REDUCE THE STORAGE REQUIREMENT FOR BIOMETRIC DATA IN AADHAR PROJECT

Directory of Open Access Journals (Sweden)

T. Sivakumar

2013-02-01

Full Text Available AADHAR is an Indian Government Project to provide unique identification to each Citizen of India. The objective of the project is to collect all the personal details and the biometric traits from each individual. Biometric traits such as iris, face and fingerprint are being collected for authentication. All the information will be stored in a centralized data repository. Considering about the storage requirement for the biometric data of the entire population of India, approximately 20,218 TB of storage space will be required. Since 10 fingerprint data are stored, fingerprint details will take most of the space. In this paper, the storage requirement for the biometric data in the AADHAR project is analyzed and a method is proposed to reduce the storage by cropping the original biometric image before storing. This method can reduce the storage space of the biometric data drastically. All the measurements given in this paper are approximate only.

dna and seed proteins fingerprinting of egyptian crop plants

African Journals Online (AJOL)

Dr. Haddad

2012-11-01

Nov 1, 2012 ... combinations were used for fingerprinting six cultivars which belongs to barley, rice and wheat cultivars leading to the production of numerous AFLP bands, 300 of them were polymorphic. Thirty SSR markers were obtained from fingerprinting eight cultivars belonging to the five studied species using 11.

DNA fingerprinting in botany: past, present, future

OpenAIRE

Nybom, Hilde; Weising, Kurt; Rotter, Björn

2014-01-01

Almost three decades ago Alec Jeffreys published his seminal Nature papers on the use of minisatellite probes for DNA fingerprinting of humans (Jeffreys and colleagues Nature 1985, 314:67–73 and Nature 1985, 316:76–79). The new technology was soon adopted for many other organisms including plants, and when Hilde Nybom, Kurt Weising and Alec Jeffreys first met at the very First International Conference on DNA Fingerprinting in Berne, Switzerland, in 1990, everybody was enthusiastic about the n...

Accessible biometrics: A frustrated total internal reflection approach to imaging fingerprints.

Science.gov (United States)

Smith, Nathan D; Sharp, James S

2017-05-01

Fingerprints are widely used as a means of identifying persons of interest because of the highly individual nature of the spatial distribution and types of features (or minuta) found on the surface of a finger. This individuality has led to their wide application in the comparison of fingerprints found at crime scenes with those taken from known offenders and suspects in custody. However, despite recent advances in machine vision technology and image processing techniques, fingerprint evidence is still widely being collected using outdated practices involving ink and paper - a process that can be both time consuming and expensive. Reduction of forensic service budgets increasingly requires that evidence be gathered and processed more rapidly and efficiently. However, many of the existing digital fingerprint acquisition devices have proven too expensive to roll out on a large scale. As a result new, low-cost imaging technologies are required to increase the quality and throughput of the processing of fingerprint evidence. Here we describe an inexpensive approach to digital fingerprint acquisition that is based upon frustrated total internal reflection imaging. The quality and resolution of the images produced are shown to be as good as those currently acquired using ink and paper based methods. The same imaging technique is also shown to be capable of imaging powdered fingerprints that have been lifted from a crime scene using adhesive tape or gel lifters. Copyright © 2017 The Chartered Society of Forensic Sciences. Published by Elsevier B.V. All rights reserved.

Solving the Mystery of Fading Fingerprints with London Dispersion Forces.

Science.gov (United States)

Kimbrough, Doris R.; DeLorenzo, Ronald

1998-01-01

Focuses on the kidnapping of a child whose fingerprints were not found inside the crime vehicle. Discusses the investigation that followed and led to knowledge of the differences between the fingerprints of children and adults. (DDR)

Spectrum-effect relationship between HPLC fingerprints and hypolipidemic effect of Curcuma aromatica.

Science.gov (United States)

Liu, Meiqiong; Wu, Youjiao; Huang, Shushi; Liu, Huagang; Feng, Jie

2018-02-23

Curcuma aromatica is used as a traditional Chinese medicine, and it is mainly distributed in Guangxi, China. In this study, 10 batches of C. aromatica were collected from different origins in Guangxi. The fingerprints were established by HPLC technique to investigate the quality stability of C. aromatica. The spectrum-effect relationship between HPLC fingerprints and hypolipidemic effect of C. aromatica was assessed by similarity analysis, gray relational analysis and multiple linear regression analysis. From the results, the similarity values between each batch of C. aromatica and reference fingerprint were >0.880, indicating the good quality stability of the 10 batches of C. aromatica. Twenty common peaks were selected as the fingerprints to evaluate the quality and hypolipidemic effect of C. aromatica. The results of spectrum-effect relationship showed that peaks 10, 18, 13, 15 and 17 in the fingerprints were closely related to hypolipidemic effect. This study successfully established the spectrum-effect relationship between HPLC fingerprints and hypolipidemic effect of C. aromatica, which provided methods for quality control and more effectively studies on bioactive compounds of C. aromatica. It could also provide a new simple and effective method for utilizing the fingerprints to optimize the Chinese prescription and develop traditional Chinese medicine. Copyright © 2018 John Wiley & Sons, Ltd.

A Modified Electrostatic Adsorption Apparatus for Latent Fingerprint Development on Unfired Cartridge Cases.

Science.gov (United States)

Xu, Jingyang; Zhang, Ziyuan; Zheng, Xiaochun; Bond, John W

2017-05-01

Visualization of latent fingerprints on metallic surfaces by the method of applying electrostatic charging and adsorption is considered as a promising chemical-free method, which has the merit of nondestruction, and is considered to be effective for some difficult situations such as aged fingerprint deposits or those exposed to environmental extremes. In fact, a portable electrostatic generator can be easily accessible in a local forensic technology laboratory, which is already widely used in the visualization of footwear impressions. In this study, a modified version of this electrostatic apparatus is proposed for latent fingerprint development and has shown great potential in visualizing fingerprints on metallic surfaces such as cartridge cases. Results indicate that this experimental arrangement can successfully develop aged latent fingerprints on metal surfaces, and we demonstrate its effectiveness compared with existing conventional fingerprint recovery methods. © 2016 American Academy of Forensic Sciences.

Self-Organizing Maps for Fingerprint Image Quality Assessment

DEFF Research Database (Denmark)

Olsen, Martin Aastrup; Tabassi, Elham; Makarov, Anton

2013-01-01

Fingerprint quality assessment is a crucial task which needs to be conducted accurately in various phases in the biometric enrolment and recognition processes. Neglecting quality measurement will adversely impact accuracy and efficiency of biometric recognition systems (e.g. verification and iden......Fingerprint quality assessment is a crucial task which needs to be conducted accurately in various phases in the biometric enrolment and recognition processes. Neglecting quality measurement will adversely impact accuracy and efficiency of biometric recognition systems (e.g. verification...... machine learning techniques. We train a self-organizing map (SOM) to cluster blocks of fingerprint images based on their spatial information content. The output of the SOM is a high-level representation of the finger image, which forms the input to a Random Forest trained to learn the relationship between...

Detecting anthropogenic climate change with an optimal fingerprint method

International Nuclear Information System (INIS)

Hegerl, G.C.; Storch, H. von; Hasselmann, K.; Santer, B.D.; Jones, P.D.

1994-01-01

We propose a general fingerprint strategy to detect anthropogenic climate change and present application to near surface temperature trends. An expected time-space-variable pattern of anthropogenic climate change (the 'signal') is identified through application of an appropriate optimally matched space-time filter (the 'fingerprint') to the observations. The signal and the fingerprint are represented in a space with sufficient observed and simulated data. The signal pattern is derived from a model-generated prediction of anthropogenic climate change. Application of the fingerprint filter to the data yields a scalar detection variable. The statistically optimal fingerprint is obtained by weighting the model-predicted pattern towards low-noise directions. A combination of model output and observations is used to estimate the noise characteristics of the detection variable, arising from the natural variability of climate in the absence of external forcing. We test then the null hypothesis that the observed climate change is part of natural climate variability. We conclude that a statistically significant externally induced warming has been observed, with the caveat of a possibly inadequate estimate of the internal climate variability. In order to attribute this warming uniquely to anthropogenic greenhouse gas forcing, more information on the climate's response to other forcing mechanisms (e.g. changes in solar radiation, volcanic or anthropogenic aerosols) and their interaction is needed. (orig./KW)

Establishment and application of milk fingerprint by gel filtration chromatography.

Science.gov (United States)

Gao, P; Li, J; Li, Z; Hao, J; Zan, L

2016-12-01

Raw milk adulteration frequently occurs in undeveloped countries. It not only reduces the nutritional value of milk, but it is also harmful to consumers. In this paper, we focused on investigating an efficient method for the quality control of raw milk protein. A gel filtration chromatography (GFC) fingerprint method combined with chemometrics was developed for fingerprint analysis of raw milk. To optimize the GFC conditions, milk fat was removed by centrifugation, and GFC analysis was performed on a Superdex 75 10/300GL column (Just Scientific, Shanghai, China) with 0.2 M NaH 2 PO 4 -Na 2 HPO 4 buffer (pH 7.0) as the mobile phase. The flow rate was 0.5mL/min, and the detection wavelength was set at 280 nm. Ten batches of 120 raw milk samples were analyzed to establish the GFC fingerprint under optimal conditions. Six major peaks common to the chromatogram of each raw milk sample were selected for fingerprint analysis, and the characteristic peaks were used to establish a standard chromatographic fingerprint. Principal component analysis was then applied to classify GFC information of adulterated milk and raw milk, allowing adulterated samples to be effectively screened out from the raw milk in principal component analysis scores plot. The fingerprint method demonstrates promising features in detecting milk protein adulteration. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Polarization-based and specular-reflection-based noncontact latent fingerprint imaging and lifting

Science.gov (United States)

Lin, Shih-Schön; Yemelyanov, Konstantin M.; Pugh, Edward N., Jr.; Engheta, Nader

2006-09-01

In forensic science the finger marks left unintentionally by people at a crime scene are referred to as latent fingerprints. Most existing techniques to detect and lift latent fingerprints require application of a certain material directly onto the exhibit. The chemical and physical processing applied to the fingerprint potentially degrades or prevents further forensic testing on the same evidence sample. Many existing methods also have deleterious side effects. We introduce a method to detect and extract latent fingerprint images without applying any powder or chemicals on the object. Our method is based on the optical phenomena of polarization and specular reflection together with the physiology of fingerprint formation. The recovered image quality is comparable to existing methods. In some cases, such as the sticky side of tape, our method shows unique advantages.

Ubiquity of Wi-Fi: Crowdsensing Properties for Urban Fingerprint Positioning

Directory of Open Access Journals (Sweden)

LECA, C. L.

2017-11-01

Full Text Available Positioning systems based on location fingerprinting have become an area of intense research, mainly with the aim of providing indoor localization. Many challenges arise when trying to deploy location fingerprinting to an outdoor environment. The main problem is achieving coverage of large outdoor spaces, which needs an intensive data gathering effort. This paper proposes the use of mobile crowdsensing in order to build a fingerprint database consisting of Wi-Fi networks received signal strength measurements. Mobile crowdsensing is represented by the usage of smart-phones equipped with GPS and Wi-Fi sensors for the collection of fingerprints. The primary objective of this work is to prove the feasibility of urban positioning using Wi-Fi crowdsensed data by showing that Wi-Fi networks are ubiquitous in urban areas. We then examine the gathered data and report our findings on challenges in building and maintaining a large-scale fingerprint database, the influence of the data collection method on the Wi-Fi data and the influence of fading on measurements. As Wi-Fi access-points are shown to exhibit mobility, we also propose and analyze methods for detecting and classification of mobile and static access-points.

Accommodating error analysis in comparison and clustering of molecular fingerprints.

Science.gov (United States)

Salamon, H; Segal, M R; Ponce de Leon, A; Small, P M

1998-01-01

Molecular epidemiologic studies of infectious diseases rely on pathogen genotype comparisons, which usually yield patterns comprising sets of DNA fragments (DNA fingerprints). We use a highly developed genotyping system, IS6110-based restriction fragment length polymorphism analysis of Mycobacterium tuberculosis, to develop a computational method that automates comparison of large numbers of fingerprints. Because error in fragment length measurements is proportional to fragment length and is positively correlated for fragments within a lane, an align-and-count method that compensates for relative scaling of lanes reliably counts matching fragments between lanes. Results of a two-step method we developed to cluster identical fingerprints agree closely with 5 years of computer-assisted visual matching among 1,335 M. tuberculosis fingerprints. Fully documented and validated methods of automated comparison and clustering will greatly expand the scope of molecular epidemiology.

Low rank magnetic resonance fingerprinting.

Science.gov (United States)

Mazor, Gal; Weizman, Lior; Tal, Assaf; Eldar, Yonina C

2016-08-01

Magnetic Resonance Fingerprinting (MRF) is a relatively new approach that provides quantitative MRI using randomized acquisition. Extraction of physical quantitative tissue values is preformed off-line, based on acquisition with varying parameters and a dictionary generated according to the Bloch equations. MRF uses hundreds of radio frequency (RF) excitation pulses for acquisition, and therefore high under-sampling ratio in the sampling domain (k-space) is required. This under-sampling causes spatial artifacts that hamper the ability to accurately estimate the quantitative tissue values. In this work, we introduce a new approach for quantitative MRI using MRF, called Low Rank MRF. We exploit the low rank property of the temporal domain, on top of the well-known sparsity of the MRF signal in the generated dictionary domain. We present an iterative scheme that consists of a gradient step followed by a low rank projection using the singular value decomposition. Experiments on real MRI data demonstrate superior results compared to conventional implementation of compressed sensing for MRF at 15% sampling ratio.

Hyperbolic Location Fingerprinting: A Calibration-Free Solution for Handling Differences in Signal Strength

DEFF Research Database (Denmark)

Kjærgaard, Mikkel Baun; Munk, Carsten Valdemar

2008-01-01

records fingerprints as signal-strength ratios between pairs of base stations instead of absolute signal-strength values. The proposed solution has been evaluated by extending two well-known location fingerprinting techniques to hyperbolic location fingerprinting. The extended techniques have been tested...

Fingerprint Recognition using Fuzzy Logic with Triangular Pattern Template

DEFF Research Database (Denmark)

Hussain, Dil Muhammad Akbar

2006-01-01

A fingerprint is a pattern of ridges and valleys that exist on the surface of the finger. The uniqueness of a fingerprint is typically determined by the overall pattern of ridges and valleys as well as the local ridge structures e.g., a ridge bifurcation or a ridge ending, which are called minutiae...

Zone-based RSS Reporting for Location Fingerprinting

DEFF Research Database (Denmark)

Kjærgaard, Mikkel Baun; Treu, Georg; Linnhoff–Popien, Claudia

2007-01-01

In typical location fingerprinting systems a tracked terminal reports sampled Received Signal Strength (RSS) values to a location server, which estimates its position based on a database of pre-recorded RSS fingerprints. So far, poll-based and periodic RSS reporting has been proposed. However......, for supporting proactive Location-based Services (LBSs), triggered by pre-defined spatial events, the periodic protocol is inefficient. Hence, this paper introduces zone-based RSS reporting: the location server translates geographical zones defined by the LBS into RSS-based representations, which are dynamically...

An atomistic fingerprint algorithm for learning ab initio molecular force fields

Science.gov (United States)

Tang, Yu-Hang; Zhang, Dongkun; Karniadakis, George Em

2018-01-01

Molecular fingerprints, i.e., feature vectors describing atomistic neighborhood configurations, is an important abstraction and a key ingredient for data-driven modeling of potential energy surface and interatomic force. In this paper, we present the density-encoded canonically aligned fingerprint algorithm, which is robust and efficient, for fitting per-atom scalar and vector quantities. The fingerprint is essentially a continuous density field formed through the superimposition of smoothing kernels centered on the atoms. Rotational invariance of the fingerprint is achieved by aligning, for each fingerprint instance, the neighboring atoms onto a local canonical coordinate frame computed from a kernel minisum optimization procedure. We show that this approach is superior over principal components analysis-based methods especially when the atomistic neighborhood is sparse and/or contains symmetry. We propose that the "distance" between the density fields be measured using a volume integral of their pointwise difference. This can be efficiently computed using optimal quadrature rules, which only require discrete sampling at a small number of grid points. We also experiment on the choice of weight functions for constructing the density fields and characterize their performance for fitting interatomic potentials. The applicability of the fingerprint is demonstrated through a set of benchmark problems.

Mid-infrared supercontinuum generation in the fingerprint region

DEFF Research Database (Denmark)

Møller, Uffe Visbech; Petersen, Christian Rosenberg; Kubat, Irnis

The mid-infrared spectral region is of great technical and scientific interest because most molecules display fundamental vibrational absorptions in this region, leaving distinctive spectral fingerprints. Here, we demonstrate experimentally that launching intense ultra-short pulses with a central...... the potential of fibres to emit across the mid-infrared molecular fingerprint region, which is of key importance for applications such as early cancer diagnostics, gas sensing and food quality control....

Graphene Nanopres for DNA Fingerprinting

Science.gov (United States)

Ahmed, Towfiq; Balatsky, Alexander V.; Haraldsen, J. T.; Schuller, Ivan K.; di Ventra, M.; Wikfeldt, K. T.

2013-03-01

The recent progress in nanopore experiments with transverse current is important for the development of fast, accurate and cheap finger-printing techniques for single nucleotide. Despite its enormous potential for the next generation DNA sequencing technology, the presence of large noise in the temporal spectrum of transverse current remains a big challenge for getting highly accurate interpretation of data. In this paper we present our abinitio calculations, and propose graphene based device for DNA fingerprinting. We calculate transmission current through graphene for each DNA base (A,C,G,T). As shown in our work, a proper time-series analysis of a signal provides a higher quality information in identifying single bio-molecule is translocating through the nanopores. This work is supported by LANL, Nordita, US DOE, AFOSR, and NIH.

Fissile fingerprints

International Nuclear Information System (INIS)

Edwards, R.

1995-01-01

This article looks at recent research which may allow police and customs officers to detect smuggled weapons-grade plutonium and uranium. Contrary to popular opinion, nuclear materials do not have a nuclear ''fingerprint'' but enough information can be gleaned from sources to confirm what has been learnt from other data. Indeed, two leading nuclear laboratories can look at the same analytical results and draw different conclusions. The case of a lead cylinder seized from a German garage is examined to illustrate the confusion. (UK)

Performance analysis of a hybrid fingerprint extracted from optical coherence tomography fingertip scans

CSIR Research Space (South Africa)

Darlow, Luke N

2016-06-01

Full Text Available The Hybrid fingerprint is a local-quality-specific blend of the surface and internal fingerprints, extracted from optical coherence tomography scans. Owing to its origin, and the manner in which it is obtained, the Hybrid fingerprint is a high...

Investigation of gamma-ray fingerprint identifying mechanism for the types of radiation sources

CERN Document Server

Liu Su Ping; Gu Dang Chang; Gong-Jian; Hao Fan Hua; Hu Guang Chun

2002-01-01

Radiation fingerprints sometimes can be used to label and identify the radiation resources. For instance, in a future nuclear reduction treaty that requires verification of irreversible dismantling of reduced nuclear warheads, the radiation fingerprints of nuclear warheads are expected to play a key role in labelling and identifying the reduced warheads. It would promote the development of nuclear warheads deep-cuts verification technologies if authors start right now some investigations on the issues related to the radiation fingerprints. The author dedicated to the investigation of gamma-ray fingerprint identifying mechanism for the types of radiation resources. The purpose of the identifying mechanism investigation is to find a credible way to tell whether any two gamma-ray spectral fingerprints that are under comparison are radiated from the same resource. The authors created the spectrum pattern comparison (SPC) to study the comparability of the two radiation fingerprints. Guided by the principle of SPC,...

The FBI wavelet/scalar quantization standard for gray-scale fingerprint image compression

Energy Technology Data Exchange (ETDEWEB)

Bradley, J.N.; Brislawn, C.M. [Los Alamos National Lab., NM (United States); Hopper, T. [Federal Bureau of Investigation, Washington, DC (United States)

1993-05-01

The FBI has recently adopted a standard for the compression of digitized 8-bit gray-scale fingerprint images. The standard is based on scalar quantization of a 64-subband discrete wavelet transform decomposition of the images, followed by Huffman coding. Novel features of the algorithm include the use of symmetric boundary conditions for transforming finite-length signals and a subband decomposition tailored for fingerprint images scanned at 500 dpi. The standard is intended for use in conjunction with ANSI/NBS-CLS 1-1993, American National Standard Data Format for the Interchange of Fingerprint Information, and the FBI`s Integrated Automated Fingerprint Identification System.

Transparent Fingerprint Sensor System for Large Flat Panel Display

Directory of Open Access Journals (Sweden)

Wonkuk Seo

2018-01-01

Full Text Available In this paper, we introduce a transparent fingerprint sensing system using a thin film transistor (TFT sensor panel, based on a self-capacitive sensing scheme. An armorphousindium gallium zinc oxide (a-IGZO TFT sensor array and associated custom Read-Out IC (ROIC are implemented for the system. The sensor panel has a 200 × 200 pixel array and each pixel size is as small as 50 μm × 50 μm. The ROIC uses only eight analog front-end (AFE amplifier stages along with a successive approximation analog-to-digital converter (SAR ADC. To get the fingerprint image data from the sensor array, the ROIC senses a capacitance, which is formed by a cover glass material between a human finger and an electrode of each pixel of the sensor array. Three methods are reviewed for estimating the self-capacitance. The measurement result demonstrates that the transparent fingerprint sensor system has an ability to differentiate a human finger’s ridges and valleys through the fingerprint sensor array.

Finger-vein and fingerprint recognition based on a feature-level fusion method

Science.gov (United States)

Yang, Jinfeng; Hong, Bofeng

2013-07-01

Multimodal biometrics based on the finger identification is a hot topic in recent years. In this paper, a novel fingerprint-vein based biometric method is proposed to improve the reliability and accuracy of the finger recognition system. First, the second order steerable filters are used here to enhance and extract the minutiae features of the fingerprint (FP) and finger-vein (FV). Second, the texture features of fingerprint and finger-vein are extracted by a bank of Gabor filter. Third, a new triangle-region fusion method is proposed to integrate all the fingerprint and finger-vein features in feature-level. Thus, the fusion features contain both the finger texture-information and the minutiae triangular geometry structure. Finally, experimental results performed on the self-constructed finger-vein and fingerprint databases are shown that the proposed method is reliable and precise in personal identification.

A novel hand-type detection technique with fingerprint sensor

Science.gov (United States)

Abe, Narishige; Shinzaki, Takashi

2013-05-01

In large-scale biometric authentication systems such as the US-Visit (USA), a 10-fingerprints scanner which simultaneously captures four fingerprints is used. In traditional systems, specific hand-types (left or right) are indicated, but it is difficult to detect hand-type due to the hand rotation and the opening and closing of fingers. In this paper, we evaluated features that were extracted from hand images (which were captured by a general optical scanner) that are considered to be effective for detecting hand-type. Furthermore, we extended the knowledge to real fingerprint images, and evaluated the accuracy with which it detects hand-type. We obtained an accuracy of about 80% with only three fingers (index, middle, ring finger).

Visualization of latent fingerprints beneath opaque electrical tapes by optical coherence tomography

Science.gov (United States)

Liu, Kangkang; Zhang, Ning; Meng, Li; Li, Zhigang; Xu, Xiaojing

2018-03-01

Electrical tape is found as one type of important trace evidence in crime scene. For example, it is very frequently used to insulate wires in explosive devices in many criminal cases. The fingerprints of the suspects were often left on the adhesive side of the tapes, which can provide very useful clues for the investigation and make it possible for individual identification. The most commonly used method to detect and visualize those latent fingerprints is to peel off each layer of the tapes first and then adopt the chemical methods to develop the fingerprints on the tapes. However, the peeling-off and chemical development process would degrade and contaminate the fingerprints and thus adversely affect the accuracy of identification. Optical coherence tomography (OCT) is a novel forensic imaging modality based on lowcoherence interferometry, which has the advantages of non-destruction, micrometer-level high resolution and crosssectional imaging. In this study, a fiber-based spectral-domain OCT (SD-OCT) system with {6μm resolution was employed to obtain the image of fingerprint sandwiched between two opaque electrical tapes without any pre-processing procedure like peeling-off. Three-dimensional (3D) OCT reconstruction was performed and the subsurface image was produced to visualize the latent fingerprints. The results demonstrate that OCT is a promising tool for recovering the latent fingerprints hidden beneath opaque electrical tape non-destructively and rapidly.

DNA fingerprinting in forensics: past, present, future.

Science.gov (United States)

Roewer, Lutz

2013-11-18

DNA fingerprinting, one of the great discoveries of the late 20th century, has revolutionized forensic investigations. This review briefly recapitulates 30 years of progress in forensic DNA analysis which helps to convict criminals, exonerate the wrongly accused, and identify victims of crime, disasters, and war. Current standard methods based on short tandem repeats (STRs) as well as lineage markers (Y chromosome, mitochondrial DNA) are covered and applications are illustrated by casework examples. Benefits and risks of expanding forensic DNA databases are discussed and we ask what the future holds for forensic DNA fingerprinting.

Hydrodynamical model with massless constituents

International Nuclear Information System (INIS)

Chiu, C.B.; Wang, K.H.

1974-01-01

Within the constituent hydrodynamical model, it is shown that the total number of constituents is conserved, if these constituents are massless and satisfy the Fermi-Dirac distribution. A simple scheme for the transition from the constituent-phase to the hadron-phase is suggested, and the hadron inclusive momentum spectra are presented for this case. This phase transition scheme predicts the average transverse momentum of meson resonances which is compatible with the data. (U.S.)

RF-Based Location Using Interpolation Functions to Reduce Fingerprint Mapping

Science.gov (United States)

Ezpeleta, Santiago; Claver, José M.; Pérez-Solano, Juan J.; Martí, José V.

2015-01-01

Indoor RF-based localization using fingerprint mapping requires an initial training step, which represents a time consuming process. This location methodology needs a database conformed with RSSI (Radio Signal Strength Indicator) measures from the communication transceivers taken at specific locations within the localization area. But, the real world localization environment is dynamic and it is necessary to rebuild the fingerprint database when some environmental changes are made. This paper explores the use of different interpolation functions to complete the fingerprint mapping needed to achieve the sought accuracy, thereby reducing the effort in the training step. Also, different distributions of test maps and reference points have been evaluated, showing the validity of this proposal and necessary trade-offs. Results reported show that the same or similar localization accuracy can be achieved even when only 50% of the initial fingerprint reference points are taken. PMID:26516862

DNA Fingerprinting Using PCR: A Practical Forensic Science Activity

Science.gov (United States)

Choi, Hyun-Jung; Ahn, Jung Hoon; Ko, Minsu

2008-01-01

This paper describes a forensic science simulation programme applicable for use in colleges. Students were asked to find a putative suspect by DNA fingerprinting using a simple protocol developed in this study. DNA samples were obtained from a hair root and a drop of blood, common sources of DNA in forensic science. The DNA fingerprinting protocol…

THE INVESTIGATION OF THE RELATIONSHIP BETWEEN FINGERPRINT PATTERNS AND CRIME TYPES

OpenAIRE

DELİCE, Murat; DUMAN, Ali; ÖZEL, Şaban Ali

2014-01-01

The exclusivity of prints at the tip of each individuals fingers is known for thousands of years and these prints are used for security purposes for a long time. Recent developments have pointed out that fingerprint patterns are related to gender, heredity, diseases, blood types and even character. However, the relationship between fingerprint patterns and crime types has not been explored. In order to meet this need, this research study examines the fingerprint patterns of suspects who are i...

Application of DNA fingerprints for cell-line individualization.

OpenAIRE

Gilbert, D A; Reid, Y A; Gail, M H; Pee, D; White, C; Hay, R J; O'Brien, S J

1990-01-01

DNA fingerprints of 46 human cell lines were derived using minisatellite probes for hypervariable genetic loci. The incidence of 121 HaeIII DNA fragments among 33 cell lines derived from unrelated individuals was used to estimate allelic and genotypic frequencies for each fragment and for composite individual DNA fingerprints. We present a quantitative estimate of the extent of genetic difference between individuals, an estimate based on the percentage of restriction fragments at which they d...

A new method of artificial latent fingerprint creation using artificial sweat and inkjet printer.

Science.gov (United States)

Hong, Sungwook; Hong, Ingi; Han, Aleum; Seo, Jin Yi; Namgung, Juyoung

2015-12-01

In order to study fingerprinting in the field of forensic science, it is very important to have two or more latent fingerprints with identical chemical composition and intensity. However, it is impossible to obtain identical fingerprints, in reality, because fingerprinting comes out slightly differently every time. A previous research study had proposed an artificial fingerprint creation method in which inkjet ink was replaced with amino acids and sodium chloride solution: the components of human sweat. But, this method had some drawbacks: divalent cations were not added while formulating the artificial sweat solution, and diluted solutions were used for creating weakly deposited latent fingerprint. In this study, a method was developed for overcoming the drawbacks of the methods used in the previous study. Several divalent cations were added in this study because the amino acid-ninhydrin (or some of its analogues) complex is known to react with divalent cations to produce a photoluminescent product; and, similarly, the amino acid-1,2-indanedione complex is known to be catalyzed by a small amount of zinc ions to produce a highly photoluminescent product. Also, in this study, a new technique was developed which enables to adjust the intensity when printing the latent fingerprint patterns. In this method, image processing software is used to control the intensity of the master fingerprint patterns, which adjusts the printing intensity of the latent fingerprints. This new method opened the way to produce a more realistic artificial fingerprint in various strengths with one artificial sweat working solution. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Wine fingerprinting using a bio-geochemical approach

Directory of Open Access Journals (Sweden)

Fernandes José Ramiro

2015-01-01

Full Text Available The wine sector is a billion euro business and therefore subjected to multiple attempts of fraudulent practices. This requires the development of rapid and reliable methods to detect such situations. Several methodologies have been developed based on the chemical profiles of the wines, but they are limited due to the environmental conditions that cannot be controlled. The use of DNA-based detection systems are an emergent research field that have been extended to a wide variety of food prod- ucts and are still the most reliable methods for varietal identification. However these methods are not suitable for geographical determination. Soil related fingerprints have a primary role considering that there is a relationship between the elemental compo- sition of wine and the composition of the provenance soil. WineBioCode is a project aiming to define the best strategy for wine authenticity based on a multidisciplinary approach. Two DNA-based strategies have been developed based on Real-time PCR and a label free optical biosensor platform. Both platforms enabled successful identification of specific DNA-targets when applied to Vitis vinifera L., and can be applied throughout the grape-wine chain. The methods are complementary and can be used in dif- ferent situations, according to the requirements. The geographical evaluation has been assessed by the strontium 87Sr/86Sr isotope ratio determination involving soil evaluation in the vineyards followed by its assay in the wine samples. The results are being integrated in order to establish the best procedure to be undertaken for wine fingerprinting, including varietal composition and geographical origin, therefore fulfilling the requirements of the geographical denominations in wine certification.

Nucleus fingerprinting for the unique identification of Feulgen-stained nuclei

Science.gov (United States)

Friedrich, David; Brozio, Matthias; Bell, André; Biesterfeld, Stefan; Böcking, Alfred; Aach, Til

2012-03-01

DNA Image Cytometry is a method for non-invasive cancer diagnosis which measures the DNA content of Feulgen-stained nuclei. DNA content is measured using a microscope system equipped with a digital camera as a densitometer and estimating the DNA content from the absorption of light when passing through the nuclei. However, a DNA Image Cytometry measurement is only valid if each nucleus is only measured once. To assist the user in preventing multiple measurements of the same nucleus, we have developed a unique digital identifier for the characterization of Feulgen-stained nuclei, the so called Nucleus Fingerprint. Only nuclei with a new fingerprint can be added to the measurement. This fingerprint is based on basic nucleus features, the contour of the nucleus and the spatial relationship to nuclei in the vicinity. Based on this characterization, a classifier for testing two nuclei for identity is presented. In a pairwise comparison of ~40000 pairs of mutually different nuclei, 99.5% were classified as different. In another 450 tests, the fingerprints of the same nucleus recorded a second time were in all cases judged identical. We therefore conclude that our Nucleus Fingerprint approach robustly prevents the repeated measurement of nuclei in DNA Image Cytometry.

Fingerprint Image Enhancement Based on Second Directional Derivative of the Digital Image

Directory of Open Access Journals (Sweden)

Onnia Vesa

2002-01-01

Full Text Available This paper presents a novel approach of fingerprint image enhancement that relies on detecting the fingerprint ridges as image regions where the second directional derivative of the digital image is positive. A facet model is used in order to approximate the derivatives at each image pixel based on the intensity values of pixels located in a certain neighborhood. We note that the size of this neighborhood has a critical role in achieving accurate enhancement results. Using neighborhoods of various sizes, the proposed algorithm determines several candidate binary representations of the input fingerprint pattern. Subsequently, an output binary ridge-map image is created by selecting image zones, from the available binary image candidates, according to a MAP selection rule. Two public domain collections of fingerprint images are used in order to objectively assess the performance of the proposed fingerprint image enhancement approach.

The FBI wavelet/scalar quantization standard for gray-scale fingerprint image compression

Energy Technology Data Exchange (ETDEWEB)

Bradley, J.N.; Brislawn, C.M. (Los Alamos National Lab., NM (United States)); Hopper, T. (Federal Bureau of Investigation, Washington, DC (United States))

1993-01-01

The FBI has recently adopted a standard for the compression of digitized 8-bit gray-scale fingerprint images. The standard is based on scalar quantization of a 64-subband discrete wavelet transform decomposition of the images, followed by Huffman coding. Novel features of the algorithm include the use of symmetric boundary conditions for transforming finite-length signals and a subband decomposition tailored for fingerprint images scanned at 500 dpi. The standard is intended for use in conjunction with ANSI/NBS-CLS 1-1993, American National Standard Data Format for the Interchange of Fingerprint Information, and the FBI's Integrated Automated Fingerprint Identification System.

[Baking method of Platycladi Cacumen Carbonisatum based on similarity of UPLC fingerprints].

Science.gov (United States)

Shan, Mingqiu; Chen, Chao; Yao, Xiaodong; Ding, Anwei

2010-09-01

To establish a baking method of Platycladi Cacumen Carbonisatum for providing a new idea to Carbonic Herbs' research. Samples were prepared in an oven for different time at different temperatures separately. Then the fingerprints of the samples were determined by UPLC. According to the standard fingerprint, the similarities of the samples' fingerprints were compared. The similarities of 3 samples, which were baked at 230 degrees C for 20 min, 30 min and at 240 degrees C for 20 min, were above 0.96. According to the similarities of the fingerprints and in view of the appearances, Platycladi Cacumen Carbonizing should be baked at 230 degrees C for 20 min.

Fingerprint matching algorithm for poor quality images

Directory of Open Access Journals (Sweden)

Vedpal Singh

2015-04-01

Full Text Available The main aim of this study is to establish an efficient platform for fingerprint matching for low-quality images. Generally, fingerprint matching approaches use the minutiae points for authentication. However, it is not such a reliable authentication method for low-quality images. To overcome this problem, the current study proposes a fingerprint matching methodology based on normalised cross-correlation, which would improve the performance and reduce the miscalculations during authentication. It would decrease the computational complexities. The error rate of the proposed method is 5.4%, which is less than the two-dimensional (2D dynamic programming (DP error rate of 5.6%, while Lee's method produces 5.9% and the combined method has 6.1% error rate. Genuine accept rate at 1% false accept rate is 89.3% but at 0.1% value it is 96.7%, which is higher. The outcome of this study suggests that the proposed methodology has a low error rate with minimum computational effort as compared with existing methods such as Lee's method and 2D DP and the combined method.

Recognition of explosives fingerprints on objects for courier services using machine learning methods and laser-induced breakdown spectroscopy.

Science.gov (United States)

Moros, J; Serrano, J; Gallego, F J; Macías, J; Laserna, J J

2013-06-15

During recent years laser-induced breakdown spectroscopy (LIBS) has been considered one of the techniques with larger ability for trace detection of explosives. However, despite of the high sensitivity exhibited for this application, LIBS suffers from a limited selectivity due to difficulties in assigning the molecular origin of the spectral emissions observed. This circumstance makes the recognition of fingerprints a latent challenging problem. In the present manuscript the sorting of six explosives (chloratite, ammonal, DNT, TNT, RDX and PETN) against a broad list of potential harmless interferents (butter, fuel oil, hand cream, olive oil, …), all of them in the form of fingerprints deposited on the surfaces of objects for courier services, has been carried out. When LIBS information is processed through a multi-stage architecture algorithm built from a suitable combination of 3 learning classifiers, an unknown fingerprint may be labeled into a particular class. Neural network classifiers trained by the Levenberg-Marquardt rule were decided within 3D scatter plots projected onto the subspace of the most useful features extracted from the LIBS spectra. Experimental results demonstrate that the presented algorithm sorts fingerprints according to their hazardous character, although its spectral information is virtually identical in appearance, with rates of false negatives and false positives not beyond of 10%. These reported achievements mean a step forward in the technology readiness level of LIBS for this complex application related to defense, homeland security and force protection. Copyright © 2013 Elsevier B.V. All rights reserved.

Fingerprint Matching by Thin-plate Spline Modelling of Elastic Deformations

NARCIS (Netherlands)

Bazen, A.M.; Gerez, Sabih H.

2003-01-01

This paper presents a novel minutiae matching method that describes elastic distortions in fingerprints by means of a thin-plate spline model, which is estimated using a local and a global matching stage. After registration of the fingerprints according to the estimated model, the number of matching

AIR-MRF: Accelerated iterative reconstruction for magnetic resonance fingerprinting.

Science.gov (United States)

Cline, Christopher C; Chen, Xiao; Mailhe, Boris; Wang, Qiu; Pfeuffer, Josef; Nittka, Mathias; Griswold, Mark A; Speier, Peter; Nadar, Mariappan S

2017-09-01

Existing approaches for reconstruction of multiparametric maps with magnetic resonance fingerprinting (MRF) are currently limited by their estimation accuracy and reconstruction time. We aimed to address these issues with a novel combination of iterative reconstruction, fingerprint compression, additional regularization, and accelerated dictionary search methods. The pipeline described here, accelerated iterative reconstruction for magnetic resonance fingerprinting (AIR-MRF), was evaluated with simulations as well as phantom and in vivo scans. We found that the AIR-MRF pipeline provided reduced parameter estimation errors compared to non-iterative and other iterative methods, particularly at shorter sequence lengths. Accelerated dictionary search methods incorporated into the iterative pipeline reduced the reconstruction time at little cost of quality. Copyright © 2017 Elsevier Inc. All rights reserved.

Binary similarity measures for fingerprint analysis of qualitative metabolomic profiles.

Science.gov (United States)

Rácz, Anita; Andrić, Filip; Bajusz, Dávid; Héberger, Károly

2018-01-01

Contemporary metabolomic fingerprinting is based on multiple spectrometric and chromatographic signals, used either alone or combined with structural and chemical information of metabolic markers at the qualitative and semiquantitative level. However, signal shifting, convolution, and matrix effects may compromise metabolomic patterns. Recent increase in the use of qualitative metabolomic data, described by the presence (1) or absence (0) of particular metabolites, demonstrates great potential in the field of metabolomic profiling and fingerprint analysis. The aim of this study is a comprehensive evaluation of binary similarity measures for the elucidation of patterns among samples of different botanical origin and various metabolomic profiles. Nine qualitative metabolomic data sets covering a wide range of natural products and metabolomic profiles were applied to assess 44 binary similarity measures for the fingerprinting of plant extracts and natural products. The measures were analyzed by the novel sum of ranking differences method (SRD), searching for the most promising candidates. Baroni-Urbani-Buser (BUB) and Hawkins-Dotson (HD) similarity coefficients were selected as the best measures by SRD and analysis of variance (ANOVA), while Dice (Di1), Yule, Russel-Rao, and Consonni-Todeschini 3 ranked the worst. ANOVA revealed that concordantly and intermediately symmetric similarity coefficients are better candidates for metabolomic fingerprinting than the asymmetric and correlation based ones. The fingerprint analysis based on the BUB and HD coefficients and qualitative metabolomic data performed equally well as the quantitative metabolomic profile analysis. Fingerprint analysis based on the qualitative metabolomic profiles and binary similarity measures proved to be a reliable way in finding the same/similar patterns in metabolomic data as that extracted from quantitative data.

Fingerprint-based structure retrieval using electron density.

Science.gov (United States)

Yin, Shuangye; Dokholyan, Nikolay V

2011-03-01

We present a computational approach that can quickly search a large protein structural database to identify structures that fit a given electron density, such as determined by cryo-electron microscopy. We use geometric invariants (fingerprints) constructed using 3D Zernike moments to describe the electron density, and reduce the problem of fitting of the structure to the electron density to simple fingerprint comparison. Using this approach, we are able to screen the entire Protein Data Bank and identify structures that fit two experimental electron densities determined by cryo-electron microscopy. Copyright © 2010 Wiley-Liss, Inc.

Fingerprint extraction from interference destruction terahertz spectrum.

Science.gov (United States)

Xiong, Wei; Shen, Jingling

2010-10-11

In this paper, periodic peaks in a terahertz absorption spectrum are confirmed to be induced from interference effects. Theoretically, we explained the periodic peaks and calculated the locations of them. Accordingly, a technique was suggested, with which the interference peaks in a terahertz spectrum can be eliminated and therefore a real terahertz absorption spectrum can be obtained. Experimentally, a sample, Methamphetamine, was investigated and its terahertz fingerprint was successfully extracted from its interference destruction spectrum. This technique is useful in getting samples' terahertz fingerprint spectra, and furthermore provides a fast nondestructive testing method using a large size terahertz beam to identify materials.

Algorithm comparison for schedule optimization in MR fingerprinting.

Science.gov (United States)

Cohen, Ouri; Rosen, Matthew S

2017-09-01

In MR Fingerprinting, the flip angles and repetition times are chosen according to a pseudorandom schedule. In previous work, we have shown that maximizing the discrimination between different tissue types by optimizing the acquisition schedule allows reductions in the number of measurements required. The ideal optimization algorithm for this application remains unknown, however. In this work we examine several different optimization algorithms to determine the one best suited for optimizing MR Fingerprinting acquisition schedules. Copyright © 2017 Elsevier Inc. All rights reserved.

Chemical Fingerprint Analysis and Quantitative Analysis of Rosa rugosa by UPLC-DAD

Directory of Open Access Journals (Sweden)

Sanawar Mansur

2016-12-01

Full Text Available A method based on ultra performance liquid chromatography with a diode array detector (UPLC-DAD was developed for quantitative analysis of five active compounds and chemical fingerprint analysis of Rosa rugosa. Ten batches of R. rugosa collected from different plantations in the Xinjiang region of China were used to establish the fingerprint. The feasibility and advantages of the used UPLC fingerprint were verified for its similarity evaluation by systematically comparing chromatograms with professional analytical software recommended by State Food and Drug Administration (SFDA of China. In quantitative analysis, the five compounds showed good regression (R2 = 0.9995 within the test ranges, and the recovery of the method was in the range of 94.2%–103.8%. The similarities of liquid chromatography fingerprints of 10 batches of R. rugosa were more than 0.981. The developed UPLC fingerprint method is simple, reliable, and validated for the quality control and identification of R. rugosa. Additionally, simultaneous quantification of five major bioactive ingredients in the R. rugosa samples was conducted to interpret the consistency of the quality test. The results indicated that the UPLC fingerprint, as a characteristic distinguishing method combining similarity evaluation and quantification analysis, can be successfully used to assess the quality and to identify the authenticity of R. rugosa.

Beware of the possibility of fingerprinting techniques transferring DNA.

Science.gov (United States)

van Oorschot, Roland A H; Treadwell, Sally; Beaurepaire, James; Holding, Nicole L; Mitchell, Robert J

2005-11-01

Fingerprinting brushes have the potential to collect and transfer DNA during powdering. Squirrel-hair fingerprint brushes exposed to specific sets of saliva stains and brushes used in routine casework were tested for their ability to collect and transfer DNA containing material using standard DNA extraction procedures and AmpFlSTR Profiler Plus amplification and typing procedures. The tests found that the risk of transferring DNA during powdering and having a detrimental impact on the analysis increases if the examiner powders over either biological stains (such as blood or saliva) or very fresh prints and uses more sensitive PCR amplification and typing procedures. We advocate caution when powdering prints from which DNA may also be collected and provide options for consideration to limit the risk of transferred DNA contamination while fingerprinting.

A STRONG SECURITY PROTOCOL AGAINST FINGERPRINT DATABASE ATTACKS

Directory of Open Access Journals (Sweden)

U. Latha

2013-08-01

Full Text Available The Biometric data is subject to on-going changes and create a crucial problem in fingerprint database. To deal with this, a security protocol is proposed to protect the finger prints information from the prohibited users. Here, a security protocol is proposed to protect the finger prints information. The proposed system comprised of three phases namely, fingerprint reconstruction, feature extraction and development of trigon based security protocol. In fingerprint reconstruction, the different crack variance level finger prints images are reconstructed by the M-band Dual Tree Complex Wavelet Transform (DTCWT. After that features are extracted by binarization. A set of finger print images are utilized to evaluate the performance of security protocol and the result from this process guarantees the healthiness of the proposed trigon based security protocol. The implementation results show the effectiveness of proposed trigon based security protocol in protecting the finger print information and the achieved improvement in image reconstruction and the security process.

Wavelet/scalar quantization compression standard for fingerprint images

Energy Technology Data Exchange (ETDEWEB)

Brislawn, C.M.

1996-06-12

US Federal Bureau of Investigation (FBI) has recently formulated a national standard for digitization and compression of gray-scale fingerprint images. Fingerprints are scanned at a spatial resolution of 500 dots per inch, with 8 bits of gray-scale resolution. The compression algorithm for the resulting digital images is based on adaptive uniform scalar quantization of a discrete wavelet transform subband decomposition (wavelet/scalar quantization method). The FBI standard produces archival-quality images at compression ratios of around 15 to 1 and will allow the current database of paper fingerprint cards to be replaced by digital imagery. The compression standard specifies a class of potential encoders and a universal decoder with sufficient generality to reconstruct compressed images produced by any compliant encoder, allowing flexibility for future improvements in encoder technology. A compliance testing program is also being implemented to ensure high standards of image quality and interchangeability of data between different implementations.

Distribution of radioactive constituents in river waters

International Nuclear Information System (INIS)

Herranz, M.; Elejalde, C.; Legarda, F.; Romero, F.

1994-01-01

For a research project on the distribution and evaluation of natural and artificial radioactive constituents in ecological segments of Biscay (northeast spain), the amounts of nuclides present in the main river waters were measured. Radioactive procedures include i) total alpha and beta indexes with a gas flow detector, dry residues near to 2 and 10 mg/ cm sup 2, respectively and counting periods of 1000 mn, ii) gamma emitters with a low level gamma spectrometer (Ge-HP detector + 8000 channels analyser) using the dry residue from 8 litres and a counting period of 4 days and iii) statistical treatment of data at 95% confidence.In this paper, ten water samples from the nervion river basin are included. Physical and chemical parameters of samples were also determined by standard procedures, because there is a sharp change in the composition of this river in the first part of the course. Radioactive constituents were identified as follows: a sample has a detectable alpha index, all samples contains beta emitters with a high variability, natural nuclides from uranium and thorium families were detected in some cases. A parallel behaviour is found between samples where K-40 and Cs-137 were found. The paper tries at last to find relations among chemical and radioactive constituents by the application of multivariate statistical methods, specially for the case of Cs-137, the only artificial nuclide identified in this work. 1 tab., 2 figs., 5 refs. (author)

Complexity and distortion analysis on methods for unrolling 3D to 2D fingerprints

CSIR Research Space (South Africa)

Mlambo, CS

2015-11-01

Full Text Available and studies involve the application of three-dimensional (3D) fingerprint systems, where the details of the finger are captured using 3D technologies and the captured 3D fingerprints are converted into two-dimensional (2D) fingerprints. This paper presents a...

Fluorescence, electrophoretic and chromatographic fingerprints of herbal medicines and their comparative chemometric analysis.

Science.gov (United States)

Mazina, Jekaterina; Vaher, Merike; Kuhtinskaja, Maria; Poryvkina, Larisa; Kaljurand, Mihkel

2015-07-01

The aim of the present study was to compare the polyphenolic compositions of 47 medicinal herbs (HM) and four herbal tea mixtures from Central Estonia by rapid, reliable and sensitive Spectral Fluorescence Signature (SFS) method in a front face mode. The SFS method was validated for the main identified HM representatives including detection limits (0.037mgL(-1) for catechin, 0.052mgL(-1) for protocatechuic acid, 0.136mgL(-1) for chlorogenic acid, 0.058mgL(-1) for syringic acid and 0.256mgL(-1) for ferulic acid), linearity (up to 5.0-15mgL(-1)), intra-day precision (RSDs=6.6-10.6%), inter-day precision (RSDs=6.4-13.8%), matrix effect (-15.8 to +5.5) and recovery (85-107%). The phytochemical fingerprints were differentiated by parallel factor analysis (PARAFAC) combined with hierarchical cluster analysis (CA) and principal component analysis (PCA). HM were clustered into four main clusters (catechin-like, hydroxycinnamic acid-like, dihydrobenzoic acid-like derivatives containing HM and HM with low/very low content of fluorescent constituents) and 14 subclusters (rich, medium, low/very low contents). The average accuracy and precision of CA for validation HM set were 97.4% (within 85.2-100%) and 89.6%, (within 66.7-100%), respectively. PARAFAC-PCA/CA has improved the analysis of HM by the SFS method. The results were verified by two separation methods CE-DAD and HPLC-DAD-MS also combined with PARAFAC-PCA/CA. The SFS-PARAFAC-PCA/CA method has potential as a rapid and reliable tool for investigating the fingerprints and predicting the composition of HM or evaluating the quality and authenticity of different standardised formulas. Moreover, SFS-PARAFAC-PCA/CA can be implemented as a laboratory and/or an onsite method. Copyright © 2015 Elsevier B.V. All rights reserved.

High-speed biometrics ultrasonic system for 3D fingerprint imaging

Science.gov (United States)

Maev, Roman G.; Severin, Fedar

2012-10-01

The objective of this research is to develop a new robust fingerprint identification technology based upon forming surface-subsurface (under skin) ultrasonic 3D images of the finger pads. The presented work aims to create specialized ultrasonic scanning methods for biometric purposes. Preliminary research has demonstrated the applicability of acoustic microscopy for fingerprint reading. The additional information from internal skin layers and dermis structures contained in the scan can essentially improve confidence in the identification. Advantages of this system include high resolution and quick scanning time. Operating in pulse-echo mode provides spatial resolution up to 0.05 mm. Technology advantages of the proposed technology are the following: • Full-range scanning of the fingerprint area "nail to nail" (2.5 x 2.5 cm) can be done in less than 5 sec with a resolution of up to 1000 dpi. • Collection of information about the in-depth structure of the fingerprint realized by the set of spherically focused 50 MHz acoustic lens provide the resolution ~ 0.05 mm or better • In addition to fingerprints, this technology can identify sweat porous at the surface and under the skin • No sensitivity to the contamination of the finger's surface • Detection of blood velocity using Doppler effect can be implemented to distinguish living specimens • Utilization as polygraph device • Simple connectivity to fingerprint databases obtained with other techniques • The digitally interpolated images can then be enhanced allowing for greater resolution • Method can be applied to fingernails and underlying tissues, providing more information • A laboratory prototype of the biometrics system based on these described principles was designed, built and tested. It is the first step toward a practical implementation of this technique.

Forensic Discrimination of Latent Fingerprints Using Laser-Induced Breakdown Spectroscopy (LIBS) and Chemometric Approaches.

Science.gov (United States)

Yang, Jun-Ho; Yoh, Jack J

2018-01-01

A novel technique is reported for separating overlapping latent fingerprints using chemometric approaches that combine laser-induced breakdown spectroscopy (LIBS) and multivariate analysis. The LIBS technique provides the capability of real time analysis and high frequency scanning as well as the data regarding the chemical composition of overlapping latent fingerprints. These spectra offer valuable information for the classification and reconstruction of overlapping latent fingerprints by implementing appropriate statistical multivariate analysis. The current study employs principal component analysis and partial least square methods for the classification of latent fingerprints from the LIBS spectra. This technique was successfully demonstrated through a classification study of four distinct latent fingerprints using classification methods such as soft independent modeling of class analogy (SIMCA) and partial least squares discriminant analysis (PLS-DA). The novel method yielded an accuracy of more than 85% and was proven to be sufficiently robust. Furthermore, through laser scanning analysis at a spatial interval of 125 µm, the overlapping fingerprints were reconstructed as separate two-dimensional forms.

Analysis of fingerprint samples, testing various conditions, for forensic DNA identification.

Science.gov (United States)

Ostojic, Lana; Wurmbach, Elisa

2017-01-01

Fingerprints can be of tremendous value for forensic biology, since they can be collected from a wide variety of evident types, such as handles of weapons, tools collected in criminal cases, and objects with no apparent staining. DNA obtained from fingerprints varies greatly in quality and quantity, which ultimately affects the quality of the resulting STR profiles. Additional difficulties can arise when fingerprint samples show mixed STR profiles due to the handling of multiple persons. After applying a tested protocol for sample collection (swabbing with 5% Triton X-100), DNA extraction (using an enzyme that works at elevated temperatures), and PCR amplification (AmpFlSTR® Identifiler® using 31cycles) extensive analysis was performed to better understand the challenges inherent to fingerprint samples, with the ultimate goal of developing valuable profiles (≥50% complete). The impact of time on deposited fingerprints was investigated, revealing that while the quality of profiles deteriorated, full STR profiles could still be obtained from samples after 40days of storage at room temperature. By comparing the STR profiles from fingerprints of the dominant versus the non-dominant hand, we found a slightly better quality from the non-dominant hand, which was not always significant. Substrates seem to have greater effects on fingerprints. Tests on glass, plastic, paper and metal (US Quarter dollar, made of Cu and Ni), common substrates in offices and homes, showed best results for glass, followed by plastic and paper, while almost no profiles were obtained from a Quarter dollar. Important for forensic casework, we also assessed three-person mixtures of touched fingerprint samples. Unlike routinely used approaches for sampling evidence, the surface of an object (bottle) was sectioned into six equal parts and separate samples were taken from each section. The samples were processed separately for DNA extraction and STR amplification. The results included a few single

A BAC clone fingerprinting approach to the detection of human genome rearrangements

Science.gov (United States)

Krzywinski, Martin; Bosdet, Ian; Mathewson, Carrie; Wye, Natasja; Brebner, Jay; Chiu, Readman; Corbett, Richard; Field, Matthew; Lee, Darlene; Pugh, Trevor; Volik, Stas; Siddiqui, Asim; Jones, Steven; Schein, Jacquie; Collins, Collin; Marra, Marco

2007-01-01

We present a method, called fingerprint profiling (FPP), that uses restriction digest fingerprints of bacterial artificial chromosome clones to detect and classify rearrangements in the human genome. The approach uses alignment of experimental fingerprint patterns to in silico digests of the sequence assembly and is capable of detecting micro-deletions (1-5 kb) and balanced rearrangements. Our method has compelling potential for use as a whole-genome method for the identification and characterization of human genome rearrangements. PMID:17953769

[Identification of a repetitive sequence element for DNA fingerprinting in Phytophthora sojae].

Science.gov (United States)

Yin, Lihua; Wang, Qinhu; Ning, Feng; Zhu, Xiaoying; Zuo, Yuhu; Shan, Weixing

2010-04-01

Establishment of DNA fingerprinting in Phytophthora sojae and an analysis of genetic relationship of Heilongjiang and Xinjiang populations. Bioinformatics tools were used to search repetitive sequences in P. sojae and Southern blot analysis was employed for DNA fingerprinting analysis of P. sojae populations from Heilongjiang and Xinjiang using the identified repetitive sequence. A moderately repetitive sequence was identified and designated as PS1227. Southern blot analysis indicated 34 distinct bands ranging in size from 1.5 kb-23 kb, of which 21 were polymorphic among 49 isolates examined. Analysis of single-zoospore progenies showed that the PS1227 fingerprint pattern was mitotically stable. DNA fingerprinting showed that the P. sojae isolates HP4002, SY6 and GJ0105 of Heilongjiang are genetically identical to DW303, 71228 and 71222 of Xinjiang, respectively. A moderately repetitive sequence designated PS1227 which will be useful for epidemiology and population biology studies of P. sojae was obtained, and a PS1227-based DNA fingerprinting analysis provided molecular evidence that P. sojae in Xinjiang was likely introduced from Heilongjiang.

Cloning and Characterization of a Complex DNA Fingerprinting Probe for Candida parapsilosis

Science.gov (United States)

Enger, Lee; Joly, Sophie; Pujol, Claude; Simonson, Patricia; Pfaller, Michael; Soll, David R.

2001-01-01

Candida parapsilosis accounts for a significant number of nosocomial fungemias, but in fact, no effective and verified genetic fingerprinting method has emerged for assessing the relatedness of independent isolates for epidemiological studies. A complex 15-kb DNA fingerprinting probe, Cp3-13, was therefore isolated from a library of C. parapsilosis genomic DNA fragments. The efficacy of Cp3-13 for DNA fingerprinting was verified by a comparison of its clustering capacity with those of randomly amplified polymorphic DNA analysis and internally transcribed spacer region sequencing, by testing species specificity, and by assessing its capacity to identify microevolutionary changes both in vitro and in vivo. Southern blot hybridization of EcoRI/SalI-digested DNA with Cp3-13 provides a fingerprinting system that (i) identifies the same strain in independent isolates, (ii) discriminates between unrelated isolates, (iii) separates independent isolates into valid groups in a dendrogram, (iv) identifies microevolution in infecting populations, and (v) is amenable to automatic computer-assisted DNA fingerprint analysis. This probe is now available for epidemiological studies. PMID:11158125

Examination of Speed Contribution of Parallelization for Several Fingerprint Pre-Processing Algorithms

Directory of Open Access Journals (Sweden)

GORGUNOGLU, S.

2014-05-01

Full Text Available In analysis of minutiae based fingerprint systems, fingerprints needs to be pre-processed. The pre-processing is carried out to enhance the quality of the fingerprint and to obtain more accurate minutiae points. Reducing the pre-processing time is important for identification and verification in real time systems and especially for databases holding large fingerprints information. Parallel processing and parallel CPU computing can be considered as distribution of processes over multi core processor. This is done by using parallel programming techniques. Reducing the execution time is the main objective in parallel processing. In this study, pre-processing of minutiae based fingerprint system is implemented by parallel processing on multi core computers using OpenMP and on graphics processor using CUDA to improve execution time. The execution times and speedup ratios are compared with the one that of single core processor. The results show that by using parallel processing, execution time is substantially improved. The improvement ratios obtained for different pre-processing algorithms allowed us to make suggestions on the more suitable approaches for parallelization.

Fingerprint image enhancement by differential hysteresis processing.

Science.gov (United States)

Blotta, Eduardo; Moler, Emilce

2004-05-10

A new method to enhance defective fingerprints images through image digital processing tools is presented in this work. When the fingerprints have been taken without any care, blurred and in some cases mostly illegible, as in the case presented here, their classification and comparison becomes nearly impossible. A combination of spatial domain filters, including a technique called differential hysteresis processing (DHP), is applied to improve these kind of images. This set of filtering methods proved to be satisfactory in a wide range of cases by uncovering hidden details that helped to identify persons. Dactyloscopy experts from Policia Federal Argentina and the EAAF have validated these results.

Impact of parameter fluctuations on the performance of ethanol precipitation in production of Re Du Ning Injections, based on HPLC fingerprints and principal component analysis.

Science.gov (United States)

Sun, Li-Qiong; Wang, Shu-Yao; Li, Yan-Jing; Wang, Yong-Xiang; Wang, Zhen-Zhong; Huang, Wen-Zhe; Wang, Yue-Sheng; Bi, Yu-An; Ding, Gang; Xiao, Wei

2016-01-01

The present study was designed to determine the relationships between the performance of ethanol precipitation and seven process parameters in the ethanol precipitation process of Re Du Ning Injections, including concentrate density, concentrate temperature, ethanol content, flow rate and stir rate in the addition of ethanol, precipitation time, and precipitation temperature. Under the experimental and simulated production conditions, a series of precipitated resultants were prepared by changing these variables one by one, and then examined by HPLC fingerprint analyses. Different from the traditional evaluation model based on single or a few constituents, the fingerprint data of every parameter fluctuation test was processed with Principal Component Analysis (PCA) to comprehensively assess the performance of ethanol precipitation. Our results showed that concentrate density, ethanol content, and precipitation time were the most important parameters that influence the recovery of active compounds in precipitation resultants. The present study would provide some reference for pharmaceutical scientists engaged in research on pharmaceutical process optimization and help pharmaceutical enterprises adapt a scientific and reasonable cost-effective approach to ensure the batch-to-batch quality consistency of the final products. Copyright © 2016 China Pharmaceutical University. Published by Elsevier B.V. All rights reserved.

Development and assessment of microarray-based DNA fingerprinting in Eucalyptus grandis.

Science.gov (United States)

Lezar, Sabine; Myburg, A A; Berger, D K; Wingfield, M J; Wingfield, B D

2004-11-01

Development of improved Eucalyptus genotypes involves the routine identification of breeding stock and superior clones. Currently, microsatellites and random amplified polymorphic DNA markers are the most widely used DNA-based techniques for fingerprinting of these trees. While these techniques have provided rapid and powerful fingerprinting assays, they are constrained by their reliance on gel or capillary electrophoresis, and therefore, relatively low throughput of fragment analysis. In contrast, recently developed microarray technology holds the promise of parallel analysis of thousands of markers in plant genomes. The aim of this study was to develop a DNA fingerprinting chip for Eucalyptus grandis and to investigate its usefulness for fingerprinting of eucalypt trees. A prototype chip was prepared using a partial genomic library from total genomic DNA of 23 E. grandis trees, of which 22 were full siblings. A total of 384 cloned genomic fragments were individually amplified and arrayed onto glass slides. DNA fingerprints were obtained for 17 individuals by hybridizing labeled genome representations of the individual trees to the 384-element chip. Polymorphic DNA fragments were identified by evaluating the binary distribution of their background-corrected signal intensities across full-sib individuals. Among 384 DNA fragments on the chip, 104 (27%) were found to be polymorphic. Hybridization of these polymorphic fragments was highly repeatable (R2>0.91) within the E. grandis individuals, and they allowed us to identify all 17 full-sib individuals. Our results suggest that DNA microarrays can be used to effectively fingerprint large numbers of closely related Eucalyptus trees.

Carotenoids Database: structures, chemical fingerprints and distribution among organisms.

Science.gov (United States)

Yabuzaki, Junko

2017-01-01

To promote understanding of how organisms are related via carotenoids, either evolutionarily or symbiotically, or in food chains through natural histories, we built the Carotenoids Database. This provides chemical information on 1117 natural carotenoids with 683 source organisms. For extracting organisms closely related through the biosynthesis of carotenoids, we offer a new similarity search system 'Search similar carotenoids' using our original chemical fingerprint 'Carotenoid DB Chemical Fingerprints'. These Carotenoid DB Chemical Fingerprints describe the chemical substructure and the modification details based upon International Union of Pure and Applied Chemistry (IUPAC) semi-systematic names of the carotenoids. The fingerprints also allow (i) easier prediction of six biological functions of carotenoids: provitamin A, membrane stabilizers, odorous substances, allelochemicals, antiproliferative activity and reverse MDR activity against cancer cells, (ii) easier classification of carotenoid structures, (iii) partial and exact structure searching and (iv) easier extraction of structural isomers and stereoisomers. We believe this to be the first attempt to establish fingerprints using the IUPAC semi-systematic names. For extracting close profiled organisms, we provide a new tool 'Search similar profiled organisms'. Our current statistics show some insights into natural history: carotenoids seem to have been spread largely by bacteria, as they produce C30, C40, C45 and C50 carotenoids, with the widest range of end groups, and they share a small portion of C40 carotenoids with eukaryotes. Archaea share an even smaller portion with eukaryotes. Eukaryotes then have evolved a considerable variety of C40 carotenoids. Considering carotenoids, eukaryotes seem more closely related to bacteria than to archaea aside from 16S rRNA lineage analysis. : http://carotenoiddb.jp. © The Author(s) 2017. Published by Oxford University Press.

A simple low cost latent fingerprint sensor based on deflectometry and WFT analysis

Science.gov (United States)

Dhanotia, Jitendra; Chatterjee, Amit; Bhatia, Vimal; Prakash, Shashi

2018-02-01

In criminal investigations, latent fingerprints are one of the most significant forms of evidence and most commonly used forensic investigation tool worldwide. The existing non-contact latent fingerprint detection systems are bulky, expensive and require environment which is shock and vibration resistant, thereby limiting their usability outside the laboratory. In this article, a compact, full field, low cost technique for profiling of fingerprints using deflectometry is proposed. Using inexpensive mobile phone screen based structured illumination, and windowed Fourier transform (WFT) based phase retrieval mechanism, the 2D and 3D phase plots reconstruct the profile information of the fingerprint. The phase information is also used to confirm a match between two fingerprints in real time. Since the proposed technique is non-interferometric, the measurements are least affected by environmental perturbations. Using the proposed technique, a portable sensor capable of field deployment has been realized.

Image-based fingerprint verification system using LabVIEW

Directory of Open Access Journals (Sweden)

Sunil K. Singla

2008-09-01

Full Text Available Biometric-based identification/verification systems provide a solution to the security concerns in the modern world where machine is replacing human in every aspect of life. Fingerprints, because of their uniqueness, are the most widely used and highly accepted biometrics. Fingerprint biometric systems are either minutiae-based or pattern learning (image based. The minutiae-based algorithm depends upon the local discontinuities in the ridge flow pattern and are used when template size is important while image-based matching algorithm uses both the micro and macro feature of a fingerprint and is used if fast response is required. In the present paper an image-based fingerprint verification system is discussed. The proposed method uses a learning phase, which is not present in conventional image-based systems. The learning phase uses pseudo random sub-sampling, which reduces the number of comparisons needed in the matching stage. This system has been developed using LabVIEW (Laboratory Virtual Instrument Engineering Workbench toolbox version 6i. The availability of datalog files in LabVIEW makes it one of the most promising candidates for its usage as a database. Datalog files can access and manipulate data and complex data structures quickly and easily. It makes writing and reading much faster. After extensive experimentation involving a large number of samples and different learning sizes, high accuracy with learning image size of 100 100 and a threshold value of 700 (1000 being the perfect match has been achieved.

Generating One Biometric Feature from Another: Faces from Fingerprints

Directory of Open Access Journals (Sweden)

Seref Sagiroglu

2010-04-01

Full Text Available This study presents a new approach based on artificial neural networks for generating one biometric feature (faces from another (only fingerprints. An automatic and intelligent system was designed and developed to analyze the relationships among fingerprints and faces and also to model and to improve the existence of the relationships. The new proposed system is the first study that generates all parts of the face including eyebrows, eyes, nose, mouth, ears and face border from only fingerprints. It is also unique and different from similar studies recently presented in the literature with some superior features. The parameter settings of the system were achieved with the help of Taguchi experimental design technique. The performance and accuracy of the system have been evaluated with 10-fold cross validation technique using qualitative evaluation metrics in addition to the expanded quantitative evaluation metrics. Consequently, the results were presented on the basis of the combination of these objective and subjective metrics for illustrating the qualitative properties of the proposed methods as well as a quantitative evaluation of their performances. Experimental results have shown that one biometric feature can be determined from another. These results have once more indicated that there is a strong relationship between fingerprints and faces.

Laser mass spectrometry for DNA fingerprinting for forensic applications

Science.gov (United States)

Chen, C. H. Winston; Tang, Kai; Taranenko, N. I.; Allman, S. L.; Ch'ang, L. Y.

1994-10-01

The application of DNA fingerprinting has become very broad in forensic analysis, patient identification, diagnostic medicine, and wildlife poaching, since every individual's DNA structure is identical within all tissues oftheir body. DNA fingerprinting was initiated by the use of restriction fragment length polymorphisms (RFLP). In 1987, Nakamura et aL2 found that a variable number of tandem repeats (VNTR) often occurred in the alleles. The probability of different individuals having the same number of tandem repeats in several different alleles is very low. Thus, the identification of VNTR from genomic DNA became a very reliable method for identification of individuals. Take the Huntington gene as an example, there are CAG trinucleotide repeats. For normal people, the number of CAG repeats is usually between 10 and 40. Since people have chromosomes in pairs, the possibility oftwo individuals having the same VNTR in the Huntington gene is less than one percent, ifwe assume equal distribution for various repeats. When several allels containing VNTR are analyzed for the number of repeats, the possibility of two individuals being exactly identical becomes very unlikely. Thus, DNA fingerprinting is a reliable tool for forensic analysis. In DNA fingerprinting, knowledge of the sequence of tandem repeats and restriction endornuclease sites can provide the basis for identification.

CSI Frequency Domain Fingerprint-Based Passive Indoor Human Detection

Directory of Open Access Journals (Sweden)

Chong Han

2018-04-01

Full Text Available Passive indoor personnel detection technology is now a hot topic. Existing methods have been greatly influenced by environmental changes, and there are problems with the accuracy and robustness of detection. Passive personnel detection based on Wi-Fi not only solves the above problems, but also has the advantages of being low cost and easy to implement, and can be better applied to elderly care and safety monitoring. In this paper, we propose a passive indoor personnel detection method based on Wi-Fi, which we call FDF-PIHD (Frequency Domain Fingerprint-based Passive Indoor Human Detection. Through this method, fine-grained physical layer Channel State Information (CSI can be extracted to generate feature fingerprints so as to help determine the state in the scene by matching online fingerprints with offline fingerprints. In order to improve accuracy, we combine the detection results of three receiving antennas to obtain the final test result. The experimental results show that the detection rates of our proposed scheme all reach above 90%, no matter whether the scene is human-free, stationary or a moving human presence. In addition, it can not only detect whether there is a target indoors, but also determine the current state of the target.

Generating One Biometric Feature from Another: Faces from Fingerprints

Science.gov (United States)

Ozkaya, Necla; Sagiroglu, Seref

2010-01-01

This study presents a new approach based on artificial neural networks for generating one biometric feature (faces) from another (only fingerprints). An automatic and intelligent system was designed and developed to analyze the relationships among fingerprints and faces and also to model and to improve the existence of the relationships. The new proposed system is the first study that generates all parts of the face including eyebrows, eyes, nose, mouth, ears and face border from only fingerprints. It is also unique and different from similar studies recently presented in the literature with some superior features. The parameter settings of the system were achieved with the help of Taguchi experimental design technique. The performance and accuracy of the system have been evaluated with 10-fold cross validation technique using qualitative evaluation metrics in addition to the expanded quantitative evaluation metrics. Consequently, the results were presented on the basis of the combination of these objective and subjective metrics for illustrating the qualitative properties of the proposed methods as well as a quantitative evaluation of their performances. Experimental results have shown that one biometric feature can be determined from another. These results have once more indicated that there is a strong relationship between fingerprints and faces. PMID:22399877

Fingerprint pattern classification approach based on the coordinate geometry of singularities

CSIR Research Space (South Africa)

Msiza, IS

2009-10-01

Full Text Available of fingerprint matching, it serves to reduce the duration of the query. The fingerprint classes discussed in this document are the Central Twins (CT), Tented Arch (TA), Left Loop (LL), Right Loop (RL) and the Plain Arch (PA). The classification rules employed...

Sex differences in fingerprint ridge density in a Turkish young adult population: a sample of Baskent University.

Science.gov (United States)

Oktem, Hale; Kurkcuoglu, Ayla; Pelin, Ismail Can; Yazici, Ayse Canan; Aktaş, Gulnihal; Altunay, Fikret

2015-05-01

Fingerprints are considered to be one of the most reliable methods of identification. Identification of an individual plays a vital part of any medico-legal investigations. Dermatoglyphics is a branch of science that studies epidermal ridges and ridge patterns. Epidermal ridges are polygenic characteristics that form intrauterine 10-18 weeks and considered fully developed by the sixth month of fetal growth. Fingerprints are permanent morphological characteristics and criminal detection based on fingerprints is based on the principle that no two people can have identical fingerprints. Sex determination from fingerprints has been examined in different population. In this study we aimed to study fingerprint ridge density in Turkish population sample of Baskent University students. Fingerprints were obtained from 118 women, 88 men a total of 206 students aged between 17 and 28 years old by means of simple inking method. Fingerprints from all right and left hands fingers were collected in three different area of each. The ridges on fingerprints were counted diagonally on squares measuring 5 mm × 5 mm on radial, ulnar and inferior areas. The fingerprint ridge density in radial, ulnar and inferior areas and between sexes was compared statistically Mann Whitney U test and Friedman test. The ridge density was significantly greater in women in every region studied and in all fingers when compared to men. The fingerprint ridge density in the ulnar and radial areas of the fingerprints was significantly greater than the lower area. Fingerprint ridge density can be used by medico-legal examination for sex identification. Copyright © 2015 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

DWI-based neural fingerprinting technology: a preliminary study on stroke analysis.

Science.gov (United States)

Ye, Chenfei; Ma, Heather Ting; Wu, Jun; Yang, Pengfei; Chen, Xuhui; Yang, Zhengyi; Ma, Jingbo

2014-01-01

Stroke is a common neural disorder in neurology clinics. Magnetic resonance imaging (MRI) has become an important tool to assess the neural physiological changes under stroke, such as diffusion weighted imaging (DWI) and diffusion tensor imaging (DTI). Quantitative analysis of MRI images would help medical doctors to localize the stroke area in the diagnosis in terms of structural information and physiological characterization. However, current quantitative approaches can only provide localization of the disorder rather than measure physiological variation of subtypes of ischemic stroke. In the current study, we hypothesize that each kind of neural disorder would have its unique physiological characteristics, which could be reflected by DWI images on different gradients. Based on this hypothesis, a DWI-based neural fingerprinting technology was proposed to classify subtypes of ischemic stroke. The neural fingerprint was constructed by the signal intensity of the region of interest (ROI) on the DWI images under different gradients. The fingerprint derived from the manually drawn ROI could classify the subtypes with accuracy 100%. However, the classification accuracy was worse when using semiautomatic and automatic method in ROI segmentation. The preliminary results showed promising potential of DWI-based neural fingerprinting technology in stroke subtype classification. Further studies will be carried out for enhancing the fingerprinting accuracy and its application in other clinical practices.

Motif-role-fingerprints: the building-blocks of motifs, clustering-coefficients and transitivities in directed networks.

Directory of Open Access Journals (Sweden)

Mark D McDonnell

Full Text Available Complex networks are frequently characterized by metrics for which particular subgraphs are counted. One statistic from this category, which we refer to as motif-role fingerprints, differs from global subgraph counts in that the number of subgraphs in which each node participates is counted. As with global subgraph counts, it can be important to distinguish between motif-role fingerprints that are 'structural' (induced subgraphs and 'functional' (partial subgraphs. Here we show mathematically that a vector of all functional motif-role fingerprints can readily be obtained from an arbitrary directed adjacency matrix, and then converted to structural motif-role fingerprints by multiplying that vector by a specific invertible conversion matrix. This result demonstrates that a unique structural motif-role fingerprint exists for any given functional motif-role fingerprint. We demonstrate a similar result for the cases of functional and structural motif-fingerprints without node roles, and global subgraph counts that form the basis of standard motif analysis. We also explicitly highlight that motif-role fingerprints are elemental to several popular metrics for quantifying the subgraph structure of directed complex networks, including motif distributions, directed clustering coefficient, and transitivity. The relationships between each of these metrics and motif-role fingerprints also suggest new subtypes of directed clustering coefficients and transitivities. Our results have potential utility in analyzing directed synaptic networks constructed from neuronal connectome data, such as in terms of centrality. Other potential applications include anomaly detection in networks, identification of similar networks and identification of similar nodes within networks. Matlab code for calculating all stated metrics following calculation of functional motif-role fingerprints is provided as S1 Matlab File.

Traceability and Quality Control in Traditional Chinese Medicine: From Chemical Fingerprint to Two-Dimensional Barcode

Directory of Open Access Journals (Sweden)

Yong Cai

2015-01-01

Full Text Available Chemical fingerprinting is currently a widely used tool that enables rapid and accurate quality evaluation of Traditional Chinese Medicine (TCM. However, chemical fingerprints are not amenable to information storage, recognition, and retrieval, which limit their use in Chinese medicine traceability. In this study, samples of three kinds of Chinese medicines were randomly selected and chemical fingerprints were then constructed by using high performance liquid chromatography. Based on chemical data, the process of converting the TCM chemical fingerprint into two-dimensional code is presented; preprocess and filtering algorithm are also proposed aiming at standardizing the large amount of original raw data. In order to know which type of two-dimensional code (2D is suitable for storing data of chemical fingerprints, current popular types of 2D codes are analyzed and compared. Results show that QR Code is suitable for recording the TCM chemical fingerprint. The fingerprint information of TCM can be converted into data format that can be stored as 2D code for traceability and quality control.

Image encryption using fingerprint as key based on phase retrieval algorithm and public key cryptography

Science.gov (United States)

Zhao, Tieyu; Ran, Qiwen; Yuan, Lin; Chi, Yingying; Ma, Jing

2015-09-01

In this paper, a novel image encryption system with fingerprint used as a secret key is proposed based on the phase retrieval algorithm and RSA public key algorithm. In the system, the encryption keys include the fingerprint and the public key of RSA algorithm, while the decryption keys are the fingerprint and the private key of RSA algorithm. If the users share the fingerprint, then the system will meet the basic agreement of asymmetric cryptography. The system is also applicable for the information authentication. The fingerprint as secret key is used in both the encryption and decryption processes so that the receiver can identify the authenticity of the ciphertext by using the fingerprint in decryption process. Finally, the simulation results show the validity of the encryption scheme and the high robustness against attacks based on the phase retrieval technique.

Soil-gas diffusivity fingerprints of the dual porosity system in fractured limestone

DEFF Research Database (Denmark)

Claes, Niels; Chamindu, D.T.K.K.; Jensen, Jacob Birk

2010-01-01

processes are mostly limited to hydrogeological (water and solute) transport studies with very poor attention to the gaseous phase transport studies (Kristensen et al. 2010). This study characterizes fractured limestone soils for gas diffusion based on three different gas diffusivity fingerprints. The first...... fingerprint is a two-parameter exponential model, which mainly describes the gas diffusivity in the limestone matrix while taking both fracture connectivity and matrix pore connectivity into account. With the second fingerprint, we make a close observation of the tortuous matrix pore network by means...... of a modified Buckingham (1904) pore connectivity factor (X*). The third fingerprint of the fracture network involves the average angle of diffusion α (Moldrup et al. 2010), a parameter which characterizes the average angle at which the fractures are penetrating the sample....

[Study on the fingerprint of Morus alba from different habitats by HPLC].

Science.gov (United States)

Chen, Cheng; Li, Hong-Bo; Wang, Liu-Ping; Li, Yun-Rong; Xin, Ning

2012-12-01

To establish HPLC fingerprint of Morus alba from different habitats by HPLC and provide basis for its quality control. HPLC analysis was performed on an Agilent XDB C18 Column (4.6 mm x 250 mm, 5 microm), gradient eluted composed of acetonitrile and 0.3% phosphate acid. The column temperature was set at 35 degrees C and the flow rate was 0.5 mL/min. The detective wavelength was 290 nm. The HPLC fingerprint for 10 batches of Morus alba was studied on their similarity. There were twelve common peaks in the fingerprint. The similarity of 7 batches was above 0.9 and the other batches had low similarity. The HPLC fingerprint can be used for quality control of Morus alba with high characteristics and specificity.

Chemical Visualization of Sweat Pores in Fingerprints Using GO-Enhanced TOF-SIMS.

Science.gov (United States)

Cai, Lesi; Xia, Meng-Chan; Wang, Zhaoying; Zhao, Ya-Bin; Li, Zhanping; Zhang, Sichun; Zhang, Xinrong

2017-08-15

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) has been used in imaging of small molecules (SIMS was used to detect and image relatively high mass molecules such as poison, alkaloids (>600 Da) and controlled drugs, and antibiotics (>700 Da) in fingerprints. Detail features of fingerprints such as the number and distribution of sweat pores in a ridge and even the delicate morphology of one pore were clearly revealed in SIMS images of relatively high mass molecules. The detail features combining with identified chemical composition were sufficient to establish a human identity and link the suspect to a crime scene. The wide detectable mass range and high spatial resolution make GO-enhanced TOF-SIMS a promising tool in accurate and fast analysis of fingerprints, especially in fragmental fingerprint analysis.

Converting Panax ginseng DNA and chemical fingerprints into two-dimensional barcode.

Science.gov (United States)

Cai, Yong; Li, Peng; Li, Xi-Wen; Zhao, Jing; Chen, Hai; Yang, Qing; Hu, Hao

2017-07-01

In this study, we investigated how to convert the Panax ginseng DNA sequence code and chemical fingerprints into a two-dimensional code. In order to improve the compression efficiency, GATC2Bytes and digital merger compression algorithms are proposed. HPLC chemical fingerprint data of 10 groups of P. ginseng from Northeast China and the internal transcribed spacer 2 (ITS2) sequence code as the DNA sequence code were ready for conversion. In order to convert such data into a two-dimensional code, the following six steps were performed: First, the chemical fingerprint characteristic data sets were obtained through the inflection filtering algorithm. Second, precompression processing of such data sets is undertaken. Third, precompression processing was undertaken with the P. ginseng DNA (ITS2) sequence codes. Fourth, the precompressed chemical fingerprint data and the DNA (ITS2) sequence code were combined in accordance with the set data format. Such combined data can be compressed by Zlib, an open source data compression algorithm. Finally, the compressed data generated a two-dimensional code called a quick response code (QR code). Through the abovementioned converting process, it can be found that the number of bytes needed for storing P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can be greatly reduced. After GTCA2Bytes algorithm processing, the ITS2 compression rate reaches 75% and the chemical fingerprint compression rate exceeds 99.65% via filtration and digital merger compression algorithm processing. Therefore, the overall compression ratio even exceeds 99.36%. The capacity of the formed QR code is around 0.5k, which can easily and successfully be read and identified by any smartphone. P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can form a QR code after data processing, and therefore the QR code can be a perfect carrier of the authenticity and quality of P. ginseng information. This study provides a theoretical

[An analysis of the DNA fingerprinting of intestinal flora in inflammatory bowel disease].

Science.gov (United States)

Li, Run-mei; Han, Ying; Wang, Ji-heng; Wang, Zhi-hong

2007-02-01

DNA fingerprinting for inflammatory bowel disease (IBD) patients and healthy subjects was carried out to compare the difference of intestinal flora between the two groups. DNA fingerprinting for IBD patients and healthy persons was set up with enterobacterial repetitive intergenic consensus (ERIC-PCR) technology and the difference of intestinal flora between the two groups compared. DNA fingerprinting of the IBD patients and healthy subjects was identified and a significant difference was noticed between them. There were lots of bands in the DNA fingerprinting of the healthy subjects but few in that of the IBD patients. Strikingly, same distribution of the principal band of DNA fingerprinting was noticed in IBD patients. The variety of intestinal flora in healthy subjects is more apparent than that in IBD patients. An unique principal band might be the sequence of the presence of specific etiopathogenetic bacterium, or it might be the combined sequence of mixed bacterial flora.

In Silico Genomic Fingerprints of the Bacillus anthracis Group Obtained by Virtual Hybridization

Directory of Open Access Journals (Sweden)

Hueman Jaimes-Díaz

2015-02-01

Full Text Available In this study we evaluate the capacity of Virtual Hybridization to identify between highly related bacterial strains. Eight genomic fingerprints were obtained by virtual hybridization for the Bacillus anthracis genome set, and a set of 15,264 13-nucleotide short probes designed to produce genomic fingerprints unique for each organism. The data obtained from each genomic fingerprint were used to obtain hybridization patterns simulating a DNA microarray. Two virtual hybridization methods were used: the Direct and the Extended method to identify the number of potential hybridization sites and thus determine the minimum sensitivity value to discriminate between genomes with 99.9% similarity. Genomic fingerprints were compared using both methods and phylogenomic trees were constructed to verify that the minimum detection value is 0.000017. Results obtained from the genomic fingerprints suggest that the distribution in the trees is correct, as compared to other taxonomic methods. Specific virtual hybridization sites for each of the genomes studied were also identified.

Combining Biometric Fractal Pattern and Particle Swarm Optimization-Based Classifier for Fingerprint Recognition

Directory of Open Access Journals (Sweden)

Chia-Hung Lin

2010-01-01

Full Text Available This paper proposes combining the biometric fractal pattern and particle swarm optimization (PSO-based classifier for fingerprint recognition. Fingerprints have arch, loop, whorl, and accidental morphologies, and embed singular points, resulting in the establishment of fingerprint individuality. An automatic fingerprint identification system consists of two stages: digital image processing (DIP and pattern recognition. DIP is used to convert to binary images, refine out noise, and locate the reference point. For binary images, Katz's algorithm is employed to estimate the fractal dimension (FD from a two-dimensional (2D image. Biometric features are extracted as fractal patterns using different FDs. Probabilistic neural network (PNN as a classifier performs to compare the fractal patterns among the small-scale database. A PSO algorithm is used to tune the optimal parameters and heighten the accuracy. For 30 subjects in the laboratory, the proposed classifier demonstrates greater efficiency and higher accuracy in fingerprint recognition.

Constituency Orientation in Irish Politics

DEFF Research Database (Denmark)

Kusche, Isabel

2017-01-01

The constituency orientation of Irish politicians is a recurring topic in Irish political science. Its analysis has predominantly focused on TDs. This article uses a content analysis of candidate video statements in the general election 2016 in order to assess the strength of constituency...... this pattern, indicated by the weak constituency orientation in Dublin and Cork constituencies. Results also indicate differences between parties and some political statuses, while the gender of the candidates is of no relevance. Although the material does not permit a clear distinction between effects...... of political culture and short-term considerations, taken together the results indicate that localism in Irish politics matters, but in more complicated ways than usually depicted....

Biometric Fingerprint System to Enable Rapid and Accurate Identification of Beneficiaries

OpenAIRE

Storisteanu, Daniel Matthew L; Norman, Toby L; Grigore, Alexandra; Norman, Tristram L

2015-01-01

Inability to uniquely identify clients impedes access to services and contributes to inefficiencies. Using a pocket-sized fingerprint scanner that wirelessly syncs with a health worker's smartphone, the SimPrints biometric system can link individuals' fingerprints to their health records. A pilot in Bangladesh will assess its potential.

Perancangan Aplikasi Presensi Dosen Realtime Dengan Metode Rapid Application Development (RAD Menggunakan Fingerprint Berbasis Web

Directory of Open Access Journals (Sweden)

Darma Setiawan Putra

2018-05-01

Full Text Available The fingerprint is one of the biometric methods which is can be used in the education field. Attendance monitoring system using fingerprint will make the leaders easily to monitor the attendance of the lecturer and to make decisions. The fingerprint attendance is used to easy students detecting quickly and accurately the lecturer in the classroom. This system aims to provide the lecturer status information, entry or exit for teaching when every lecturer performs a fingerprint scanning. This study uses rapid application development (RAD method to develop attendance system and involves the lecturer who have a teaching schedule in the current semester. To test the system, the lecturer was required to record the fingerprint in fingerprint machine. The result shows that the application of lecturer attendance in real time web-based can be a system provides the lecturers attendance information effectively and efficiently.

Fingerprint detection on counterfeit US dollar banknotes: the importance of preliminary paper examination.

Science.gov (United States)

Azoury, Myriam; Cohen, Drorit; Himberg, Kimmo; Qvintus-Leino, Pia; Saari, Terhi; Almog, Joseph

2004-09-01

Two seizures of counterfeit 100 US dollar bills related to the same indicative number were submitted for processing of latent fingerprints. On one group of notes, identifiable fingerprints could be detected by the routine application of amino acid reagents. In the second case, this technique gave no results, even on deliberately deposited prints. Fingerprints could be revealed, however, by cyanoacrylate fuming followed by magnetic powder. Comprehensive paper analysis showed that banknotes from both seizures differed remarkably by chemical composition as well as paper macroscopic properties. The difference in surface free energy (related to surface tension) of the banknotes in the two groups seemed to be the major factor responsible for the great variance in fingerprint detectability.

Determination and fingerprint analysis of steroidal saponins in roots of Liriope muscari (Decne.) L. H. Bailey by ultra high performance liquid chromatography coupled with ion trap time-of-flight mass spectrometry.

Science.gov (United States)

Li, Yong-Wei; Qi, Jin; Wen-Zhang; Zhou, Shui-Ping; Yan-Wu; Yu, Bo-Yang

2014-07-01

Liriope muscari (Decne.) L. H. Bailey is a well-known traditional Chinese medicine used for treating cough and insomnia. There are few reports on the quality evaluation of this herb partly because the major steroid saponins are not readily identified by UV detectors and are not easily isolated due to the existence of many similar isomers. In this study, a qualitative and quantitative method was developed to analyze the major components in L. muscari (Decne.) L. H. Bailey roots. Sixteen components were deduced and identified primarily by the information obtained from ultra high performance liquid chromatography with ion-trap time-of-flight mass spectrometry. The method demonstrated the desired specificity, linearity, stability, precision, and accuracy for simultaneous determination of 15 constituents (13 steroidal glycosides, 25(R)-ruscogenin, and pentylbenzoate) in 26 samples from different origins. The fingerprint was established, and the evaluation was achieved using similarity analysis and principal component analysis of 15 fingerprint peaks from 26 samples by ultra high performance liquid chromatography. The results from similarity analysis were consistent with those of principal component analysis. All results suggest that the established method could be applied effectively to the determination of multi-ingredients and fingerprint analysis of steroid saponins for quality assessment and control of L. muscari (Decne.) L. H. Bailey. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Provenancing Flower Bulbs by Analytical Fingerprinting: Convallaria Majalis

Directory of Open Access Journals (Sweden)

Saskia M. van Ruth

2015-01-01

Full Text Available The origin of agricultural products is gaining in appreciation while often hard to determine for various reasons. Geographical origin may be resolved using a combination of chemical and physical analytical technologies. In the present case of Lily of the Valley (Convallaria majalis rhizomes, we investigated an exploratory set of material from The Netherlands, three other European (EU countries and China. We show that the geographical origin is correlated to patterns of stable isotope ratios (isotope fingerprints and volatile organic carbon (VOC compounds (chemical fingerprints. These fingerprints allowed clear distinction using exploratory and supervised statistics. Isotope ratio mass spectrometry of 12C/13C, 14N/15N and 16O/18O isotopes separated materials from Europe and China successfully. The VOC patterns measured by Proton Transfer Reaction Mass Spectrometry (PTR-MS allowed distinction of three groups: material from The Netherlands, the other EU countries and China. This knowledge is expected to help developing a systematic and efficient analytical tool for authenticating the origin of flower bulbs.

Cluster analysis of Helicobacter pylori genomic DNA fingerprints suggests gastroduodenal disease-specific associations.

Science.gov (United States)

Go, M F; Chan, K Y; Versalovic, J; Koeuth, T; Graham, D Y; Lupski, J R

1995-07-01

Helicobacter pylori infection is now accepted as the most common cause of chronic active gastritis and peptic ulcer disease. The etiologies of many infectious diseases have been attributed to specific or clonal strains of bacterial pathogens. Polymerase chain reaction (PCR) amplification of DNA between repetitive DNA sequences, REP elements (REP-PCR), has been utilized to generate DNA fingerprints to examine similarity among strains within a bacterial species. Genomic DNA from H. pylori isolates obtained from 70 individuals (39 duodenal ulcers and 31 simple gastritis) was PCR-amplified using consensus probes to repetitive DNA elements. The H. pylori DNA fingerprints were analyzed for similarity and correlated with disease presentation using the NTSYS-pc computer program. Each H. pylori strain had a distinct DNA fingerprint except for two pairs. Single-colony DNA fingerprints of H. pylori from the same patient were identical, suggesting that each patient harbors a single strain. Computer-assisted cluster analysis of the REP-PCR DNA fingerprints showed two large clusters of isolates, one associated with simple gastritis and the other with duodenal ulcer disease. Cluster analysis of REP-PCR DNA fingerprints of H. pylori strains suggests that duodenal ulcer isolates, as a group, are more similar to one another and different from gastritis isolates. These results suggest that disease-specific strains may exist.

DNA fingerprinting of Chinese melon provides evidentiary support of seed quality appraisal.

Science.gov (United States)

Gao, Peng; Ma, Hongyan; Luan, Feishi; Song, Haibin

2012-01-01

Melon, Cucumis melo L. is an important vegetable crop worldwide. At present, there are phenomena of homonyms and synonyms present in the melon seed markets of China, which could cause variety authenticity issues influencing the process of melon breeding, production, marketing and other aspects. Molecular markers, especially microsatellites or simple sequence repeats (SSRs) are playing increasingly important roles for cultivar identification. The aim of this study was to construct a DNA fingerprinting database of major melon cultivars, which could provide a possibility for the establishment of a technical standard system for purity and authenticity identification of melon seeds. In this study, to develop the core set SSR markers, 470 polymorphic SSRs were selected as the candidate markers from 1219 SSRs using 20 representative melon varieties (lines). Eighteen SSR markers, evenly distributed across the genome and with the highest contents of polymorphism information (PIC) were identified as the core marker set for melon DNA fingerprinting analysis. Fingerprint codes for 471 melon varieties (lines) were established. There were 51 materials which were classified into17 groups based on sharing the same fingerprint code, while field traits survey results showed that these plants in the same group were synonyms because of the same or similar field characters. Furthermore, DNA fingerprinting quick response (QR) codes of 471 melon varieties (lines) were constructed. Due to its fast readability and large storage capacity, QR coding melon DNA fingerprinting is in favor of read convenience and commercial applications.

DNA Fingerprinting of Chinese Melon Provides Evidentiary Support of Seed Quality Appraisal

Science.gov (United States)

Gao, Peng; Ma, Hongyan; Luan, Feishi; Song, Haibin

2012-01-01

Melon, Cucumis melo L. is an important vegetable crop worldwide. At present, there are phenomena of homonyms and synonyms present in the melon seed markets of China, which could cause variety authenticity issues influencing the process of melon breeding, production, marketing and other aspects. Molecular markers, especially microsatellites or simple sequence repeats (SSRs) are playing increasingly important roles for cultivar identification. The aim of this study was to construct a DNA fingerprinting database of major melon cultivars, which could provide a possibility for the establishment of a technical standard system for purity and authenticity identification of melon seeds. In this study, to develop the core set SSR markers, 470 polymorphic SSRs were selected as the candidate markers from 1219 SSRs using 20 representative melon varieties (lines). Eighteen SSR markers, evenly distributed across the genome and with the highest contents of polymorphism information (PIC) were identified as the core marker set for melon DNA fingerprinting analysis. Fingerprint codes for 471 melon varieties (lines) were established. There were 51 materials which were classified into17 groups based on sharing the same fingerprint code, while field traits survey results showed that these plants in the same group were synonyms because of the same or similar field characters. Furthermore, DNA fingerprinting quick response (QR) codes of 471 melon varieties (lines) were constructed. Due to its fast readability and large storage capacity, QR coding melon DNA fingerprinting is in favor of read convenience and commercial applications. PMID:23285039

DNA fingerprinting of Chinese melon provides evidentiary support of seed quality appraisal.

Directory of Open Access Journals (Sweden)

Peng Gao

Full Text Available Melon, Cucumis melo L. is an important vegetable crop worldwide. At present, there are phenomena of homonyms and synonyms present in the melon seed markets of China, which could cause variety authenticity issues influencing the process of melon breeding, production, marketing and other aspects. Molecular markers, especially microsatellites or simple sequence repeats (SSRs are playing increasingly important roles for cultivar identification. The aim of this study was to construct a DNA fingerprinting database of major melon cultivars, which could provide a possibility for the establishment of a technical standard system for purity and authenticity identification of melon seeds. In this study, to develop the core set SSR markers, 470 polymorphic SSRs were selected as the candidate markers from 1219 SSRs using 20 representative melon varieties (lines. Eighteen SSR markers, evenly distributed across the genome and with the highest contents of polymorphism information (PIC were identified as the core marker set for melon DNA fingerprinting analysis. Fingerprint codes for 471 melon varieties (lines were established. There were 51 materials which were classified into17 groups based on sharing the same fingerprint code, while field traits survey results showed that these plants in the same group were synonyms because of the same or similar field characters. Furthermore, DNA fingerprinting quick response (QR codes of 471 melon varieties (lines were constructed. Due to its fast readability and large storage capacity, QR coding melon DNA fingerprinting is in favor of read convenience and commercial applications.

7 CFR 930.16 - Sales constituency.

Science.gov (United States)

2010-01-01

... Definitions § 930.16 Sales constituency. Sales constituency means a common marketing organization or brokerage... 7 Agriculture 8 2010-01-01 2010-01-01 false Sales constituency. 930.16 Section 930.16 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements...

Structural Fingerprints of Transcription Factor Binding Site Regions

Directory of Open Access Journals (Sweden)

Peter Willett

2009-03-01

Full Text Available Fourier transforms are a powerful tool in the prediction of DNA sequence properties, such as the presence/absence of codons. We have previously compiled a database of the structural properties of all 32,896 unique DNA octamers. In this work we apply Fourier techniques to the analysis of the structural properties of human chromosomes 21 and 22 and also to three sets of transcription factor binding sites within these chromosomes. We find that, for a given structural property, the structural property power spectra of chromosomes 21 and 22 are strikingly similar. We find common peaks in their power spectra for both Sp1 and p53 transcription factor binding sites. We use the power spectra as a structural fingerprint and perform similarity searching in order to find transcription factor binding site regions. This approach provides a new strategy for searching the genome data for information. Although it is difficult to understand the relationship between specific functional properties and the set of structural parameters in our database, our structural fingerprints nevertheless provide a useful tool for searching for function information in sequence data. The power spectrum fingerprints provide a simple, fast method for comparing a set of functional sequences, in this case transcription factor binding site regions, with the sequences of whole chromosomes. On its own, the power spectrum fingerprint does not find all transcription factor binding sites in a chromosome, but the results presented here show that in combination with other approaches, this technique will improve the chances of identifying functional sequences hidden in genomic data.

Chromatographic fingerprinting: An innovative approach for food 'identitation' and food authentication - A tutorial.

Science.gov (United States)

Cuadros-Rodríguez, Luis; Ruiz-Samblás, Cristina; Valverde-Som, Lucia; Pérez-Castaño, Estefanía; González-Casado, Antonio

2016-02-25

Fingerprinting methods describe a variety of analytical methods that provide analytical signals related to the composition of foodstuffs in a non-selective way such as by collecting a spectrum or a chromatogram. Mathematical processing of the information in such fingerprints may allow the characterisation and/or authentication of foodstuffs. In this context, the particular meaning of 'fingerprinting', in conjunction with 'profiling', is different from the original meanings used in metabolomics. This fact has produced some confusion with the use of these terms in analytical papers. Researchers coming from the metabolomic field could use 'profiling' or 'fingerprinting' on a different way to researchers who are devoted to food science. The arrival of an eclectic discipline, named 'foodomics' has not been enough to allay this terminological problem, since the authors keep on using the terms with both meanings. Thus, a first goal of this tutorial is to clarify the difference between both terms. In addition, the chemical approaches for food authentication, i.e., chemical markers, component profiling and instrumental fingerprinting, have been described. A new term, designated as 'food identitation', has been introduced in order to complete the life cycle of the chemical-based food authentication process. Chromatographic fingerprinting has been explained in detail and some strategies which could be applied has been clarified and discussed. Particularly, the strategies for chromatographic signals acquisition and chromatographic data handling are unified in a single framework. Finally, an overview about the applications of chromatographic (GC and LC) fingerprints in food authentication using different chemometric techniques has been included. Copyright © 2016 Elsevier B.V. All rights reserved.

Quantifying the provenance of aeolian sediments using multiple composite fingerprints

Science.gov (United States)

Liu, Benli; Niu, Qinghe; Qu, Jianjun; Zu, Ruiping

2016-09-01

We introduce a new fingerprinting method that uses multiple composite fingerprints for studies of aeolian sediment provenance. We used this method to quantify the provenance of sediments on both sides of the Qinghai-Tibetan Railway (QTR) in the Cuona Lake section of the Tibetan Plateau (TP), in an environment characterized by aeolian and fluvial interactions. The method involves repeatedly solving a linear mixing model based on mass conservation; the model is not limited to spatial scale or transport types and uses all the tracer groups that passed the range check, Kruskal-Wallis H-test, and a strict analytical solution screening. The proportional estimates that result from using different composite fingerprints are highly variable; however, the average of these fingerprints has a greater accuracy and certainty than any single fingerprint. The results show that sand from the lake beach, hilly surface, and gullies contribute, respectively, 48%, 31% and 21% to the western railway sediments and 43%, 33% and 24% to the eastern railway sediments. The difference between contributions from various sources on either side of the railway, which may increase in the future, was clearly related to variations in local transport characteristics, a conclusion that is supported by grain size analysis. The construction of the QTR changed the local cycling of materials, and the difference in provenance between the sediments that are separated by the railway reflects the changed sedimentary conditions on either side of the railway. The effectiveness of this method suggests that it will be useful in other studies of aeolian sediments.

Fingerprint Liveness Detection in the Presence of Capable Intruders

Science.gov (United States)

Sequeira, Ana F.; Cardoso, Jaime S.

2015-01-01

Fingerprint liveness detection methods have been developed as an attempt to overcome the vulnerability of fingerprint biometric systems to spoofing attacks. Traditional approaches have been quite optimistic about the behavior of the intruder assuming the use of a previously known material. This assumption has led to the use of supervised techniques to estimate the performance of the methods, using both live and spoof samples to train the predictive models and evaluate each type of fake samples individually. Additionally, the background was often included in the sample representation, completely distorting the decision process. Therefore, we propose that an automatic segmentation step should be performed to isolate the fingerprint from the background and truly decide on the liveness of the fingerprint and not on the characteristics of the background. Also, we argue that one cannot aim to model the fake samples completely since the material used by the intruder is unknown beforehand. We approach the design by modeling the distribution of the live samples and predicting as fake the samples very unlikely according to that model. Our experiments compare the performance of the supervised approaches with the semi-supervised ones that rely solely on the live samples. The results obtained differ from the ones obtained by the more standard approaches which reinforces our conviction that the results in the literature are misleadingly estimating the true vulnerability of the biometric system. PMID:26102491

Fingerprint Liveness Detection in the Presence of Capable Intruders

Directory of Open Access Journals (Sweden)

Ana F. Sequeira

2015-06-01

Full Text Available Fingerprint liveness detection methods have been developed as an attempt to overcome the vulnerability of fingerprint biometric systems to spoofing attacks. Traditional approaches have been quite optimistic about the behavior of the intruder assuming the use of a previously known material. This assumption has led to the use of supervised techniques to estimate the performance of the methods, using both live and spoof samples to train the predictive models and evaluate each type of fake samples individually. Additionally, the background was often included in the sample representation, completely distorting the decision process. Therefore, we propose that an automatic segmentation step should be performed to isolate the fingerprint from the background and truly decide on the liveness of the fingerprint and not on the characteristics of the background. Also, we argue that one cannot aim to model the fake samples completely since the material used by the intruder is unknown beforehand. We approach the design by modeling the distribution of the live samples and predicting as fake the samples very unlikely according to that model. Our experiments compare the performance of the supervised approaches with the semi-supervised ones that rely solely on the live samples. The results obtained differ from the ones obtained by the more standard approaches which reinforces our conviction that the results in the literature are misleadingly estimating the true vulnerability of the biometric system.

DWI-Based Neural Fingerprinting Technology: A Preliminary Study on Stroke Analysis

Directory of Open Access Journals (Sweden)

Chenfei Ye

2014-01-01

Full Text Available Stroke is a common neural disorder in neurology clinics. Magnetic resonance imaging (MRI has become an important tool to assess the neural physiological changes under stroke, such as diffusion weighted imaging (DWI and diffusion tensor imaging (DTI. Quantitative analysis of MRI images would help medical doctors to localize the stroke area in the diagnosis in terms of structural information and physiological characterization. However, current quantitative approaches can only provide localization of the disorder rather than measure physiological variation of subtypes of ischemic stroke. In the current study, we hypothesize that each kind of neural disorder would have its unique physiological characteristics, which could be reflected by DWI images on different gradients. Based on this hypothesis, a DWI-based neural fingerprinting technology was proposed to classify subtypes of ischemic stroke. The neural fingerprint was constructed by the signal intensity of the region of interest (ROI on the DWI images under different gradients. The fingerprint derived from the manually drawn ROI could classify the subtypes with accuracy 100%. However, the classification accuracy was worse when using semiautomatic and automatic method in ROI segmentation. The preliminary results showed promising potential of DWI-based neural fingerprinting technology in stroke subtype classification. Further studies will be carried out for enhancing the fingerprinting accuracy and its application in other clinical practices.

Accommodating error analysis in comparison and clustering of molecular fingerprints.

OpenAIRE

Salamon, H.; Segal, M. R.; Ponce de Leon, A.; Small, P. M.

1998-01-01

Molecular epidemiologic studies of infectious diseases rely on pathogen genotype comparisons, which usually yield patterns comprising sets of DNA fragments (DNA fingerprints). We use a highly developed genotyping system, IS6110-based restriction fragment length polymorphism analysis of Mycobacterium tuberculosis, to develop a computational method that automates comparison of large numbers of fingerprints. Because error in fragment length measurements is proportional to fragment length and is ...

A New Technique in saving Fingerprint with low volume by using Chaos Game and Fractal Theory

Directory of Open Access Journals (Sweden)

Maryam Ashourzadeh

2010-12-01

Full Text Available Fingerprint is one of the simplest and most reliable biometric features of human for identification. In this study by using fractal theory and by the assistance of Chaos Game a new fractal is made from fingerprint. While making the new fractal by using Chaos Game mechanism some parameters, which can be used in identification process, can be deciphered. For this purpose, a fractal is made for each fingerprint, we save 10 parameters for every fingerprint, which have necessary information for identity, as said before. So we save 10 decimal parameters with 0.02 accuracy instead of saving the picture of a fingerprint or some parts of it. Now we improve the great volume of fingerprint pictures by using this model which employs fractal for knowing the personality

LED intense headband light source for fingerprint analysis

Science.gov (United States)

Villa-Aleman, Eliel

2005-03-08

A portable, lightweight and high-intensity light source for detecting and analyzing fingerprints during field investigation. On-site field analysis requires long hours of mobile analysis. In one embodiment, the present invention comprises a plurality of light emitting diodes; a power source; and a personal attachment means; wherein the light emitting diodes are powered by the power source, and wherein the power source and the light emitting diodes are attached to the personal attachment means to produce a personal light source for on-site analysis of latent fingerprints. The present invention is available for other applications as well.

Fingerprint segmentation: an investigation of various techniques and a parameter study of a variance-based method

CSIR Research Space (South Africa)

Msiza, IS

2011-09-01

Full Text Available Fingerprint image segmentation plays an important role in any fingerprint image analysis implementation and it should, ideally, be executed during the initial stages of a fingerprint manipulation process. After careful consideration of various...

Evaluation of a single-pixel one-transistor active pixel sensor for fingerprint imaging

Science.gov (United States)

Xu, Man; Ou, Hai; Chen, Jun; Wang, Kai

2015-08-01

Since it first appeared in iPhone 5S in 2013, fingerprint identification (ID) has rapidly gained popularity among consumers. Current fingerprint-enabled smartphones unanimously consists of a discrete sensor to perform fingerprint ID. This architecture not only incurs higher material and manufacturing cost, but also provides only static identification and limited authentication. Hence as the demand for a thinner, lighter, and more secure handset grows, we propose a novel pixel architecture that is a photosensitive device embedded in a display pixel and detects the reflected light from the finger touch for high resolution, high fidelity and dynamic biometrics. To this purpose, an amorphous silicon (a-Si:H) dual-gate photo TFT working in both fingerprint-imaging mode and display-driving mode will be developed.

Detection of visible and latent fingerprints using micro-X-ray fluorescence elemental imaging.

Science.gov (United States)

Worley, Christopher G; Wiltshire, Sara S; Miller, Thomasin C; Havrilla, George J; Majidi, Vahid

2006-01-01

Using micro-X-ray fluorescence (MXRF), a novel means of detecting fingerprints was examined in which the prints were imaged based on their elemental composition. MXRF is a nondestructive technique. Although this method requires a priori knowledge about the approximate location of a print, it offers a new and complementary means for detecting fingerprints that are also left pristine for further analysis (including potential DNA extraction) or archiving purposes. Sebaceous fingerprints and those made after perspiring were detected based on elements such as potassium and chlorine present in the print residue. Unique prints were also detected including those containing lotion, saliva, banana, or sunscreen. This proof-of-concept study demonstrates the potential for visualizing fingerprints by MXRF on surfaces that can be problematic using current methods.

Influence of Sulfur Fumigation on the Chemical Constituents and Antioxidant Activity of Buds of Lonicera japonica

Directory of Open Access Journals (Sweden)

Ai-Li Guo

2014-10-01

Full Text Available Lonicera japonica flos is widely used as a pharmaceutical resource and a commonly-employed ingredient in healthy food, soft beverages and cosmetics in China. Sometimes, sulfur fumigation is used during post-harvest handling. In this study, a comprehensive comparison of the chemical profile between sun-dried and sulfur-fumigated samples was conducted by HPLC fingerprints and simultaneous quantification of nine constituents, including secologanic acid, along with another eight usually-analyzed markers. Secologanic acid was destroyed, and its sulfonates were generated, whereas caffeoylquinic acids were protected from being oxidized. The residual sulfur dioxide in sulfur-fumigated samples was significantly higher than that in sun-dried samples, which might increase the potential incidence of toxicity to humans. Meanwhile, compared with sun-dried samples, sulfur-fumigated samples have significantly stronger antioxidant activity, which could be attributed to the joint effect of protected phenolic acids and flavonoids, as well as newly-generated iridoid sulfonates.

EKF-GPR-Based Fingerprint Renovation for Subset-Based Indoor Localization with Adjusted Cosine Similarity.

Science.gov (United States)

Yang, Junhua; Li, Yong; Cheng, Wei; Liu, Yang; Liu, Chenxi

2018-01-22

Received Signal Strength Indicator (RSSI) localization using fingerprint has become a prevailing approach for indoor localization. However, the fingerprint-collecting work is repetitive and time-consuming. After the original fingerprint radio map is built, it is laborious to upgrade the radio map. In this paper, we describe a Fingerprint Renovation System (FRS) based on crowdsourcing, which avoids the use of manual labour to obtain the up-to-date fingerprint status. Extended Kalman Filter (EKF) and Gaussian Process Regression (GPR) in FRS are combined to calculate the current state based on the original fingerprinting radio map. In this system, a method of subset acquisition also makes an immediate impression to reduce the huge computation caused by too many reference points (RPs). Meanwhile, adjusted cosine similarity (ACS) is employed in the online phase to solve the issue of outliers produced by cosine similarity. Both experiments and analytical simulation in a real Wireless Fidelity (Wi-Fi) environment indicate the usefulness of our system to significant performance improvements. The results show that FRS improves the accuracy by 19.6% in the surveyed area compared to the radio map un-renovated. Moreover, the proposed subset algorithm can bring less computation.

EKF–GPR-Based Fingerprint Renovation for Subset-Based Indoor Localization with Adjusted Cosine Similarity

Science.gov (United States)

Yang, Junhua; Li, Yong; Cheng, Wei; Liu, Yang; Liu, Chenxi

2018-01-01

Received Signal Strength Indicator (RSSI) localization using fingerprint has become a prevailing approach for indoor localization. However, the fingerprint-collecting work is repetitive and time-consuming. After the original fingerprint radio map is built, it is laborious to upgrade the radio map. In this paper, we describe a Fingerprint Renovation System (FRS) based on crowdsourcing, which avoids the use of manual labour to obtain the up-to-date fingerprint status. Extended Kalman Filter (EKF) and Gaussian Process Regression (GPR) in FRS are combined to calculate the current state based on the original fingerprinting radio map. In this system, a method of subset acquisition also makes an immediate impression to reduce the huge computation caused by too many reference points (RPs). Meanwhile, adjusted cosine similarity (ACS) is employed in the online phase to solve the issue of outliers produced by cosine similarity. Both experiments and analytical simulation in a real Wireless Fidelity (Wi-Fi) environment indicate the usefulness of our system to significant performance improvements. The results show that FRS improves the accuracy by 19.6% in the surveyed area compared to the radio map un-renovated. Moreover, the proposed subset algorithm can bring less computation. PMID:29361805

Collusion-resistant audio fingerprinting system in the modulated complex lapped transform domain.

Directory of Open Access Journals (Sweden)

Jose Juan Garcia-Hernandez

Full Text Available Collusion-resistant fingerprinting paradigm seems to be a practical solution to the piracy problem as it allows media owners to detect any unauthorized copy and trace it back to the dishonest users. Despite the billionaire losses in the music industry, most of the collusion-resistant fingerprinting systems are devoted to digital images and very few to audio signals. In this paper, state-of-the-art collusion-resistant fingerprinting ideas are extended to audio signals and the corresponding parameters and operation conditions are proposed. Moreover, in order to carry out fingerprint detection using just a fraction of the pirate audio clip, block-based embedding and its corresponding detector is proposed. Extensive simulations show the robustness of the proposed system against average collusion attack. Moreover, by using an efficient Fast Fourier Transform core and standard computer machines it is shown that the proposed system is suitable for real-world scenarios.

[Comparison of Bacteria ERIC-PCR Fingerprints of Index Fingers and Contactants].

Science.gov (United States)

Liu, Y T; Sun, D M; Shi, S P; Yang, X

2018-02-01

To explore the bacteria relevance between index fingers and contactant' surfaces （mobile phone touch screen and desktop of personal office table）. Bacteria were collected from the index fingers, mobile phone touch screen and desktop of personal office table of 10 volunteers. Enterobacterial repetitive intergenic consensus （ERIC）-PCR fingerprint was established by PCR amplification technique of metagenome. There were 7 volunteers' ERIC-PCR fingerprints of index fingers matched that took from the mobile phone touch screens, and different from each other. There were 3 volunteers' ERIC-PCR fingerprints of index fingers matched that took from desk top of personal office table, and other 7 volunteers' ERIC-PCR fingerprints did not match perfectly with that took from desk top of personal office table, but had at least one similar band for both. The bacteria on index finger shows individual specificity, which on mobile phone touching screen and personal desktop may be a new biological sample of forensic identification. Copyright© by the Editorial Department of Journal of Forensic Medicine.

Fingerprint analysis, multi-component quantitation, and antioxidant activity for the quality evaluation of Salvia miltiorrhiza var. alba by high-performance liquid chromatography and chemometrics.

Science.gov (United States)

Zhang, Danlu; Duan, Xiaoju; Deng, Shuhong; Nie, Lei; Zang, Hengchang

2015-10-01

Salvia miltiorrhiza Bge. var. alba C.Y. Wu and H.W. Li has wide prospects in clinical practice. A useful comprehensive method was developed for the quality evaluation of S. miltiorrhiza var. alba by three quantitative parameters: high-performance liquid chromatography fingerprint, ten-component contents, and antioxidant activity. The established method was validated for linearity, precision, repeatability, stability, and recovery. Principal components analysis and hierarchical clustering analysis were both used to evaluate the quality of the samples from different origins. The results showed that there were category discrepancies in quality of S. miltiorrhiza var. alba samples according to the three quantitative parameters. Multivariate linear regression was adopted to explore the relationship between components and antioxidant activity. Three constituents, namely, danshensu, rosmarinic acid, and salvianolic acid B, significantly correlated with antioxidant activity, and were successfully elucidated by the optimized multivariate linear regression model. The combined use of high-performance liquid chromatography fingerprint analysis, simultaneous multicomponent quantitative analysis, and antioxidant activity for the quality evaluation of S. miltiorrhiza var. alba is a reliable, comprehensive, and promising approach, which might provide a valuable reference for other herbal products in general to improve their quality control. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Characterization of Actinomyces with genomic DNA fingerprints and rRNA gene probes.

Science.gov (United States)

Bowden, G; Johnson, J; Schachtele, C

1993-08-01

Cellular DNA from 25 Actinomyces naeslundii and Actinomyces viscosus strains belonging to the 7 taxonomic clusters of Fillery et al. (1978) and several unclustered strains was obtained by enzymatic and N-lauroylsarcosine/guanidine isothiocyanate treatment of whole cells, followed by extraction of the nucleic acid. The DNA samples were digested with restriction endonucleases BamHI or PvuII, and agarose gel electrophoresis was used to obtain DNA fingerprints. The DNA fragments were subjected to Southern blot hybridization with a digoxigenin-labeled cDNA probe transcribed from Escherichia coli 16S and 23S rRNA. The patterns of bands from genomic (DNA fingerprints) and rDNA fingerprints (ribotypes) were used for comparison between the taxonomic cluster strains and strains within clusters. Representative strains from each taxonomic cluster provided different BamHI DNA fingerprints and ribotype patterns with 3 to 9 distinct bands. Some strains within a cluster showed identical ribotype patterns with both endonucleases (A. naeslundii B120 and A. naeslundii B102 from cluster 3), while others showed the same pattern with BamHI but a different pattern with PvuII (A. naeslundii ATCC 12104 and 398A from cluster 5). A viscosus ATCC 15987 (cluster 7) and its parent strain T6 yielded identical fingerprint and ribotype patterns. The genomic diversity revealed by DNA fingerprinting and ribotyping demonstrates that these techniques, which do not require phenotypic expression, are suited for study of the oral ecology of the Actinomyces, and for epidemiological tracking of specific Actinomyces strains associated with caries lesions and sites of periodontal destruction.

Investigation of gamma-ray fingerprint identifying mechanism for the types of radiation sources

International Nuclear Information System (INIS)

Liu Suping; Wu Huailong; Gu Dangchang; Gong Jian; Hao Fanhua; Hu Guangchun

2002-01-01

Radiation fingerprints sometimes can be used to label and identify the radiation resources. For instance, in a future nuclear reduction treaty that requires verification of irreversible dismantling of reduced nuclear warheads, the radiation fingerprints of nuclear warheads are expected to play a key role in labelling and identifying the reduced warheads. It would promote the development of nuclear warheads deep-cuts verification technologies if authors start right now some investigations on the issues related to the radiation fingerprints. The author dedicated to the investigation of gamma-ray fingerprint identifying mechanism for the types of radiation resources. The purpose of the identifying mechanism investigation is to find a credible way to tell whether any two gamma-ray spectral fingerprints that are under comparison are radiated from the same resource. The authors created the spectrum pattern comparison (SPC) to study the comparability of the two radiation fingerprints. Guided by the principle of SPC, the authors programmed a software dedicated to identify the types of radiation resources. The efficiency of the software was tested by a series of experiments with some laboratory gamma-ray resources. The experiments were designed to look into the relations between comparability and radioactive statistics, and the relations between comparability and some measurement conditions such as real time, resource activity and background etc. Two main results can be drawn from the investigation: 1) it is quite feasible to use the concept of spectral comparability to answer the question whether any two gamma-ray fingerprints are identity or not; 2) the identifying mechanism can only identify the types of radiation resources, and cannot identify the individuals with the same type and small differences

Indoor Location Fingerprinting with Heterogeneous Clients

DEFF Research Database (Denmark)

Kjærgaard, Mikkel Baun

2011-01-01

Heterogeneous wireless clients measure signal strength differently. This is a fundamental problem for indoor location fingerprinting, and it has a high impact on the positioning accuracy. Mapping-based solutions have been presented that require manual and error-prone calibration for each new clie...

DIFFERENTIATION OF Curcuma longa, Curcuma xanthorrhiza and Zingiber cassumunar BY THIN LAYER CHROMATOGRAPHY FINGERPRINT ANALYSIS

Directory of Open Access Journals (Sweden)

Mohamad Rafi

2011-07-01

Full Text Available Turmeric (Curcuma longa, java turmeric (Curcuma xanthorrhiza and cassumunar ginger (Zingiber cassumunar are widely used in traditional Indonesian medicine. These three herbs have relatively similar rhizomes colour so it is difficult to be differentiated especially if they are in powder form. A rapid and reliable method, thin layer chromatography (TLC fingerprint, has been developed in order to identify, authenticate and differentiate these three herbs through fingerprint profile of chemical compounds. TLC fingerprints of the three herbs were obtained by visualization of separate zones with visible and UV (254 and 366 nm light. The TLC fingerprint pattern is different each other and showed a specific marker zones respectively. Therefore, TLC fingerprint can be utilized for identification, authentication and differentiation method in quality control of the three herbs tested.

Reference Device-Assisted Adaptive Location Fingerprinting

Directory of Open Access Journals (Sweden)

Dongjin Wu

2016-06-01

Full Text Available Location fingerprinting suffers in dynamic environments and needs recalibration from time to time to maintain system performance. This paper proposes an adaptive approach for location fingerprinting. Based on real-time received signal strength indicator (RSSI samples measured by a group of reference devices, the approach applies a modified Universal Kriging (UK interpolant to estimate adaptive temporal and environmental radio maps. The modified UK can take the spatial distribution characteristics of RSSI into account. In addition, the issue of device heterogeneity caused by multiple reference devices is further addressed. To compensate the measuring differences of heterogeneous reference devices, differential RSSI metric is employed. Extensive experiments were conducted in an indoor field and the results demonstrate that the proposed approach not only adapts to dynamic environments and the situation of changing APs’ positions, but it is also robust toward measuring differences of heterogeneous reference devices.

Flow cytometric fingerprinting for microbial strain discrimination and physiological characterization.

Science.gov (United States)

Buysschaert, Benjamin; Kerckhof, Frederiek-Maarten; Vandamme, Peter; De Baets, Bernard; Boon, Nico

2018-02-01

The analysis of microbial populations is fundamental, not only for developing a deeper understanding of microbial communities but also for their engineering in biotechnological applications. Many methods have been developed to study their characteristics and over the last few decades, molecular analysis tools, such as DNA sequencing, have been used with considerable success to identify the composition of microbial populations. Recently, flow cytometric fingerprinting is emerging as a promising and powerful method to analyze bacterial populations. So far, these methods have primarily been used to observe shifts in the composition of microbial communities of natural samples. In this article, we apply a flow cytometric fingerprinting method to discriminate among 29 Lactobacillus strains. Our results indicate that it is possible to discriminate among 27 Lactobacillus strains by staining with SYBR green I and that the discriminatory power can be increased by combined SYBR green I and propidium iodide staining. Furthermore, we illustrate the impact of physiological changes on the fingerprinting method by demonstrating how flow cytometric fingerprinting is able to discriminate the different growth phases of a microbial culture. The sensitivity of the method is assessed by its ability to detect changes in the relative abundance of a mix of polystyrene beads down to 1.2%. When a mix of bacteria was used, the sensitivity was as between 1.2% and 5%. The presented data demonstrate that flow cytometric fingerprinting is a sensitive and reproducible technique with the potential to be applied as a method for the dereplication of bacterial isolates. © 2017 International Society for Advancement of Cytometry. © 2017 International Society for Advancement of Cytometry.

DNA Electronic Fingerprints by Local Spectroscopy on Graphene

Science.gov (United States)

Balatsky, Alexander

2013-03-01

Working and scalable alternatives to the conventional chemical methods of DNA sequencing that are based on electronic/ionic signatures would revolutionize the field of sequencing. The approach of a single molecule imaging and spectroscopy with unprecedented resolution, achieved by Scanning Tunneling Spectroscopy (STS) and nanopore electronics could enable this revolution. We use the data from our group and others in applying this local scanning tunneling microscopy and illustrate possibilities of electronic sequencing of freeze dried deposits on graphene. We will present two types of calculated fingerprints: first in Local Density of States (LDOS) of DNA nucleotide bases (A,C,G,T) deposited on graphene. Significant base-dependent features in the LDOS in an energy range within few eV of the Fermi level were found in our calculations. These features can serve as electronic fingerprints for the identification of individual bases in STS. In the second approach we present calculated base dependent electronic transverse conductance as DNA translocates through the graphene nanopore. Thus we argue that the fingerprints of DNA-graphene hybrid structures may provide an alternative route to DNA sequencing using STS. Work supported by US DOE, NORDITA.

Two-Level Evaluation on Sensor Interoperability of Features in Fingerprint Image Segmentation

Directory of Open Access Journals (Sweden)

Ya-Shuo Li

2012-03-01

Full Text Available Features used in fingerprint segmentation significantly affect the segmentation performance. Various features exhibit different discriminating abilities on fingerprint images derived from different sensors. One feature which has better discriminating ability on images derived from a certain sensor may not adapt to segment images derived from other sensors. This degrades the segmentation performance. This paper empirically analyzes the sensor interoperability problem of segmentation feature, which refers to the feature’s ability to adapt to the raw fingerprints captured by different sensors. To address this issue, this paper presents a two-level feature evaluation method, including the first level feature evaluation based on segmentation error rate and the second level feature evaluation based on decision tree. The proposed method is performed on a number of fingerprint databases which are obtained from various sensors. Experimental results show that the proposed method can effectively evaluate the sensor interoperability of features, and the features with good evaluation results acquire better segmentation accuracies of images originating from different sensors.

Franck-Condon fingerprinting of vibration-tunneling spectra.

Science.gov (United States)

Berrios, Eduardo; Sundaradevan, Praveen; Gruebele, Martin

2013-08-15

We introduce Franck-Condon fingerprinting as a method for assigning complex vibration-tunneling spectra. The B̃ state of thiophosgene (SCCl2) serves as our prototype. Despite several attempts, assignment of its excitation spectrum has proved difficult because of near-degenerate vibrational frequencies, Fermi resonance between the C-Cl stretching mode and the Cl-C-Cl bending mode, and large tunneling splittings due to the out-of-plane umbrella mode. Hence, the spectrum has never been fitted to an effective Hamiltonian. Our assignment approach replaces precise frequency information with intensity information, eliminating the need for double resonance spectroscopy or combination differences, neither of which have yielded a full assignment thus far. The dispersed fluorescence spectrum of each unknown vibration-tunneling state images its character onto known vibrational progressions in the ground state. By using this Franck-Condon fingerprint, we were able to determine the predominant character of several vibration-tunneling states and assign them; in other cases, the fingerprinting revealed that the states are strongly mixed and cannot be characterized with a simple normal mode assignment. The assigned transitions from vibration-tunneling wave functions that were not too strongly mixed could be fitted within measurement uncertainty by an effective vibration-tunneling Hamiltonian. A fit of all observed vibration-tunneling states will require a full resonance-tunneling Hamiltonian.

Protein identification by peptide mass fingerprinting

DEFF Research Database (Denmark)

Hjernø, Karin

2007-01-01

  Peptide mass fingerprinting is an effective way of identifying, e.g., gel-separated proteins, by matching experimentally obtained peptide mass data against large databases. However, several factors are known to influence the quality of the resulting matches, such as proteins contaminating the s...

A Taxonomy for Radio Location Fingerprinting

DEFF Research Database (Denmark)

Kjærgaard, Mikkel Baun

2007-01-01

Location Fingerprinting (LF) is a promising location technique for many awareness applications in pervasive computing. However, as research on LF systems goes beyond basic methods there is an increasing need for better comparison of proposed LF systems. Developers of LF systems are also lacking...

Improving Accuracy and Simplifying Training in Fingerprinting-Based Indoor Location Algorithms at Room Level

Directory of Open Access Journals (Sweden)

Mario Muñoz-Organero

2016-01-01

Full Text Available Fingerprinting-based algorithms are popular in indoor location systems based on mobile devices. Comparing the RSSI (Received Signal Strength Indicator from different radio wave transmitters, such as Wi-Fi access points, with prerecorded fingerprints from located points (using different artificial intelligence algorithms, fingerprinting-based systems can locate unknown points with a few meters resolution. However, training the system with already located fingerprints tends to be an expensive task both in time and in resources, especially if large areas are to be considered. Moreover, the decision algorithms tend to be of high memory and CPU consuming in such cases and so does the required time for obtaining the estimated location for a new fingerprint. In this paper, we study, propose, and validate a way to select the locations for the training fingerprints which reduces the amount of required points while improving the accuracy of the algorithms when locating points at room level resolution. We present a comparison of different artificial intelligence decision algorithms and select those with better results. We do a comparison with other systems in the literature and draw conclusions about the improvements obtained in our proposal. Moreover, some techniques such as filtering nonstable access points for improving accuracy are introduced, studied, and validated.

Constituency Input into Budget Management.

Science.gov (United States)

Miller, Norman E.

1995-01-01

Presents techniques for ensuring constituency involvement in district- and site-level budget management. Outlines four models for securing constituent input and focuses on strategies to orchestrate the more complex model for staff and community participation. Two figures are included. (LMI)

Successes and failures of the constituent quark model

International Nuclear Information System (INIS)

Lipkin, H.J.

1982-01-01

Our approach considers the model as a possible bridge between QCD and the experimental data and examines its predictions to see where these succeed and where they fail. We also attempt to improve the model by looking for additional simple assumptions which give better fits to the experimental data. But we avoid complicated models with too many ad hoc assumptions and too many free parameters; these can fit everything but teach us nothing. We define our constituent quark model by analogy with the constituent electron model of the atom and the constituent nucleon model of the nucleus. In the same way that an atom is assumed to consist only of constituent electrons and a central Coulomb field and a nucleus is assumed to consist only of constituent nucleons hadrons are assumed to consist only of their constituent valence quarks with no bag, no glue, no ocean, nor other constituents. Although these constituent models are oversimplified and neglect other constituents we push them as far as we can. Atomic physics has photons and vacuum polarization as well as constituent electrons, but the constituent model is adequate for calculating most features of the spectrum when finer details like the Lamb shift are neglected. 54 references

DNA Profiles from Fingerprint Lifts-Enhancing the Evidential Value of Fingermarks Through Successful DNA Typing.

Science.gov (United States)

Subhani, Zuhaib; Daniel, Barbara; Frascione, Nunzianda

2018-05-25

This study evaluated the compatibility of the most common enhancement methods and lifting techniques with DNA profiling. Emphasis is placed on modern lifting techniques (i.e., gelatin lifters and Isomark™) and historical fingerprint lifts for which limited research has been previously conducted. A total of 180 fingerprints were deposited on a glass surface, enhanced, lifted, and processed for DNA typing. DNA could be extracted and profiled for all the powders and lifts tested and from both groomed fingerprints and natural prints with no significant difference in the percentage of profile recovered. DNA profiles could also be obtained from historical fingerprint lifts (79.2% of 72 lifts) with one or more alleles detected. These results demonstrate the compatibility between different powder/lift combinations and DNA profiling therefore augmenting the evidential value of fingerprints in forensic casework. © 2018 American Academy of Forensic Sciences.

Fingerprints as an Alternative Method to Determine ABO and Rh Blood Groups.

Science.gov (United States)

Chaudhary, Sonam; Deuja, Sajana; Alam, Munna; Karmacharya, Poonam; Mondal, Monami

2017-01-01

Blood grouping is conventionally done with invasive method by taking blood samples. The objective of this study is to determine blood group with uninvasive procedure by taking fingerprints of the participants and know the associations between their fingerprints and blood groups. Seven hundred participants of both genders with no any age limitation from Manipal Teaching Hospital and Manipal College of Medical Sciences were randomly selected. The blood grouping was done by cross reacting blood sample with the antibodies. The fingerprints were taken with the help of stamp pad imprinting the finger ridges over A4 size white papers. The loop, whorl and arch patterns were studied. O+ve blood group 224 (32%) was most prevalent among 700 participants. The loop pattern was highly distributed 3708 (53%) in all blood groups except in A-ve blood group with highest distribution of whorl 20 (40%). The mean comparisons of specific fingerprint in total and also in individual fingers with different ABO and ABO-Rh blood groups showed no any statistical association with P>0.05. However, the loop distribution in individual finger was highest in right middle finger (M) of B-ve blood group 5 (10%). The whorl distribution in individual finger was highest in right index (I), left thumb (T) and left ring (R) fingers of AB+ve blood group 20 (5.5% each). Similarly, the arch distribution was highest in right index fingers of A-ve blood group 3 (6%). The mean comparison of different fingerprints with ABO and Rh blood groups showed no significant statistical association concluding fingerprints cannot be used for blood grouping.

Fingerprint Identification Using SIFT-Based Minutia Descriptors and Improved All Descriptor-Pair Matching

Directory of Open Access Journals (Sweden)

Jiuqiang Han

2013-03-01

Full Text Available The performance of conventional minutiae-based fingerprint authentication algorithms degrades significantly when dealing with low quality fingerprints with lots of cuts or scratches. A similar degradation of the minutiae-based algorithms is observed when small overlapping areas appear because of the quite narrow width of the sensors. Based on the detection of minutiae, Scale Invariant Feature Transformation (SIFT descriptors are employed to fulfill verification tasks in the above difficult scenarios. However, the original SIFT algorithm is not suitable for fingerprint because of: (1 the similar patterns of parallel ridges; and (2 high computational resource consumption. To enhance the efficiency and effectiveness of the algorithm for fingerprint verification, we propose a SIFT-based Minutia Descriptor (SMD to improve the SIFT algorithm through image processing, descriptor extraction and matcher. A two-step fast matcher, named improved All Descriptor-Pair Matching (iADM, is also proposed to implement the 1:N verifications in real-time. Fingerprint Identification using SMD and iADM (FISiA achieved a significant improvement with respect to accuracy in representative databases compared with the conventional minutiae-based method. The speed of FISiA also can meet real-time requirements.

Change of Bioactive Constituent in Clinacanthus nutans Leaves under Sun Drying

Science.gov (United States)

Abdullah, Sriyana; Aziz, Muhamad Faris Abdul

2018-03-01

Clinacanthus nutans (C. nutans) or locally known as belalai gajah is a folk medicine since ancient time. This research project was established to investigate the effects of under sun drying on the C. nutans bioactive constituent. The drying experiments were conducted using different drying surfaces i.e. perforated, black polythene and white polythene. The fresh and dried leaves were then extracted using a sonicator to evaluate its bioactive constituent. The total phenolic content (TPC) in the C. nutans extracts were determined using Follin Ciocalteu reagent method to represent the bioactive constituent. Drying over the white polythene surface showed the slowest reduction of moisture content as compared to the perforated polythene and black surfaces. Results also showed no significant effect of the drying surfaces on the TPC. However, the TPC in the dried leaves was significantly higher than in the fresh leaves. This may be due to the plant cells response to abiotic stress and the inhibition of oxidation enzymes. Therefore, drying C. nutanc leaves under sun light could be considered in order to preserve the concentration of phenolic compounds and for minimizing energy consumption.

Pollen aroma fingerprint of two sunflower (Helianthus annuus L.) genotypes characterized by different pollen colors.

Science.gov (United States)

Bertoli, Alessandra; Fambrini, Marco; Doveri, Silvia; Leonardi, Michele; Pugliesi, Claudio; Pistelli, Luisa

2011-09-01

Samples of fresh pollen grains, collected from capitula in full bloom from two genotypes of sunflower (Helianthus annuus L.) and characterized by a different color, i.e., white-cream (WC) and orange (O), were analyzed by the HS-SPME (headspacesolid phase microextraction)/GC/MS technique. This study defined for the first time the fingerprint of the sunflower pollen, separated from the disc flowers, to define its contribution to the inflorescence aroma. In the GC/MS fingerprints of the WC and O genotypes, 61 and 62 volatile compounds were identified, respectively. Monoterpene hydrocarbons (34% in O vs. 28% in WC) and sesquiterpene hydrocarbons (37% in O vs. 31% in WC) were ubiquitous in all samples analyzed and represented the main chemical classes. α-Pinene (21% in O vs. 20% in WC) and sabinene (11% in O vs. 6% in WC) were the dominant volatiles, but also a full range of aliphatic hydrocarbons and their oxygenated derivatives gave a decisive contribution to the aroma composition (10% in O vs. 12% in WC). In addition, dendrolasin (3% in O vs. 4% in WC) and some minor constituents such as (E)-hex-2-en-1-ol (0.4% in O vs. 0.1% in WC) were pointed out not only for their contribution to the pollen scent, but also for their well-known role in the plant ecological relationships. Having evaluated two pollen morphs with different carotenoid-based colors, the study sought to highlight also the presence of some volatile precursors or derivatives of these pigments in the aroma. However, the pollen aroma of the two selected genotypes made a specific chemical contribution to the sunflower inflorescence scent without any influence on carotenoid derivatives. 2011 Verlag Helvetica Chimica Acta AG, Zürich.

Chemical fingerprinting of hydrocarbon-contamination in soil

DEFF Research Database (Denmark)

Boll, Esther Sørensen; Nejrup, Jens; Jensen, Julie K.

2015-01-01

Chemical fingerprinting analyses of 29 hydrocarbon-contaminated soils were performed to assess the soil quality and determine the main contaminant sources. The results were compared to an assessment based on concentrations of the 16 priority polycyclic aromatic hydrocarbons pointed out by the U...... and in assessing weathering trends of hydrocarbon contamination in the soils. Multivariate data analysis of sum-normalized concentrations could as a stand-alone tool distinguish between hydrocarbon sources of petrogenic and pyrogenic origin, differentiate within petrogenic sources, and detect weathering trends....... Diagnostic ratios of PACs were not successful for source identification of the heavily weathered hydrocarbon sources in the soils. The fingerprinting of contaminated soils revealed an underestimation of PACs in petrogenic contaminated soils when the assessment was based solely on EPAPAH16. As alkyl...

Forensic use of fingermarks and fingerprints

NARCIS (Netherlands)

Meuwly, Didier; Li, Stan Z.; Jain, Anil K.

2014-01-01

The aim of this entry is to describe and explain the main forensic uses of fingermarks and fingerprints. It defines the concepts and provides the nomenclature related to forensic dactyloscopy. It describes the structure of the papillary ridges, the organization of the information in three levels,

Geochemical fingerprints and pebbles zircon geochronology

Indian Academy of Sciences (India)

Home; Journals; Journal of Earth System Science; Volume 125; Issue 7. Geochemical fingerprints and pebbles zircon geochronology: Implications for the provenance and tectonic setting of Lower Cretaceous sediments in the Zhucheng Basin (Jiaodong peninsula, North China). Jin-Long Ni Jun-Lai Liu Xiao-Ling Tang ...

The spectroscopic detection of drugs of abuse in fingerprints after development with powders and recovery with adhesive lifters

Science.gov (United States)

West, Matthew J.; Went, Michael J.

2009-01-01

The application of powders to fingerprints has long been established as an effective and reliable method for developing latent fingerprints. Fingerprints developed in situ at a crime scene routinely undergo lifting with specialist tapes and are then stored in evidence bags to allow secure transit and also to preserve the chain of evidence. In a previous study we have shown that exogenous material within a fingerprint can be detected using Raman spectroscopy following development with powders and lifting with adhesive tapes. Other reports have detailed the use of Raman spectroscopy to the detection of drugs of abuse in latent fingerprints including cyanoacrylate-fumed fingerprints. This study involves the application of Raman spectroscopy for the analysis of drugs of abuse in latent fingerprints for fingerprints that had been treated with powders and also subsequently lifted with adhesive tapes. Samples of seized ecstasy, cocaine, ketamine and amphetamine were supplied by East Sussex Police and by the TICTAC unit at St. Georges Hospital Tooting. Contaminated fingerprints were deposited on clean glass slides. The application of aluminium or iron based powders to contaminated fingerprints did not interfere with the Raman spectra obtained for the contaminants. Contaminated fingerprints developed with powders and then lifted with lifting tapes were also examined. The combination of these two techniques did not interfere with the successful analysis. The lifting process was repeated using hinge lifters. As the hinge lifters exhibited strong Raman bands the spectroscopic analysis was more complex and an increase in the number of exposures to the detector allowed for improved clarification. Spectral subtraction was performed to remove peaks due to the hinge lifters using OMNIC software. Raman spectra of developed and lifted fingerprints recorded through evidence bags were obtained and it was found that the detection process was not compromised. Although the application of

Contrast enhancement of fingerprint images using intuitionistic type II fuzzy set

Directory of Open Access Journals (Sweden)

Devarasan Ezhilmaran

2015-04-01

Full Text Available A novel contrast image enhancement of fingerprint images using intuitionistic type II fuzzy set theory is recommended in this work. The method of Hamacher T co-norm(S norm which generates a new membership function with the help of upper and lower membership function of type II fuzzy set. The finger print identification is one of the very few techniques employed in forensic science to aid criminal investigations in daily life, providing access control in financial security;-, visa related services, as well as others. Mostly fingerprint images are poorly illuminated and hardly visible, so it is necessary to enhance the input images. The enhancement is useful for authentication and matching. The fingerprint enhancement is vital for identifying and authenticating people by matching their fingerprints with the stored one in the database. The proposed enhancement of the intuitionistic type II fuzzy set theory results showed that it is more effective, especially, very useful for forensic science operations. The experimental results were compared with non-fuzzy, fuzzy, intuitionistic fuzzy and type II fuzzy methods in which the proposed method offered better results with good quality, less noise and low blur features.

Microbial DNA fingerprinting of human fingerprints: dynamic colonization of fingertip microflora challenges human host inferences for forensic purposes

NARCIS (Netherlands)

S. Tims (Sebastian); W.J.B. van Wamel (Willem); H.P. Endtz (Hubert); A.F. van Belkum (Alex); M.H. Kayser (Manfred)

2009-01-01

textabstractHuman fingertip microflora is transferred to touched objects and may provide forensically relevant information on individual hosts, such as on geographic origins, if endogenous microbial skin species/strains would be retrievable from physical fingerprints and would carry geographically

Typing DNA profiles from previously enhanced fingerprints using direct PCR.

Science.gov (United States)

Templeton, Jennifer E L; Taylor, Duncan; Handt, Oliva; Linacre, Adrian

2017-07-01

Fingermarks are a source of human identification both through the ridge patterns and DNA profiling. Typing nuclear STR DNA markers from previously enhanced fingermarks provides an alternative method of utilising the limited fingermark deposit that can be left behind during a criminal act. Dusting with fingerprint powders is a standard method used in classical fingermark enhancement and can affect DNA data. The ability to generate informative DNA profiles from powdered fingerprints using direct PCR swabs was investigated. Direct PCR was used as the opportunity to generate usable DNA profiles after performing any of the standard DNA extraction processes is minimal. Omitting the extraction step will, for many samples, be the key to success if there is limited sample DNA. DNA profiles were generated by direct PCR from 160 fingermarks after treatment with one of the following dactyloscopic fingerprint powders: white hadonite; silver aluminium; HiFi Volcano silk black; or black magnetic fingerprint powder. This was achieved by a combination of an optimised double-swabbing technique and swab media, omission of the extraction step to minimise loss of critical low-template DNA, and additional AmpliTaq Gold ® DNA polymerase to boost the PCR. Ninety eight out of 160 samples (61%) were considered 'up-loadable' to the Australian National Criminal Investigation DNA Database (NCIDD). The method described required a minimum of working steps, equipment and reagents, and was completed within 4h. Direct PCR allows the generation of DNA profiles from enhanced prints without the need to increase PCR cycle numbers beyond manufacturer's recommendations. Particular emphasis was placed on preventing contamination by applying strict protocols and avoiding the use of previously used fingerprint brushes. Based on this extensive survey, the data provided indicate minimal effects of any of these four powders on the chance of obtaining DNA profiles from enhanced fingermarks. Copyright © 2017

An overview of DNA fingerprinting with 32P nucleotides

International Nuclear Information System (INIS)

Pappas, G.G.

1992-01-01

The DNA probes radiolabeled with 32 P, a primary tool employed by researchers in the life sciences for > 20 yr, are used by private companies, state-run laboratories, and the FBI to generate autoradiographs displaying the unique banding patterns that constitute the DNA fingerprint. The ability to identify an individual or animal from a biological sample has profound implications. Unidentified bodies, unrecognizable remains, and missing children can be tested and the DNA fingerprint compared to those of family members for positive identification. Paternity can be established before a child's birth. Immigration disputes can easily be resolved. Other uses include pedigree determination and testing for cell-line cross-contamination. Using a DNA fingerprint to determine the guilt or innocence of an individual allegedly involved in a violent crime is very controversial and has great legal and moral implications for society. Forensic laboratories have been challenged to ensure a level of quality control and quality assurance consistent with the weight given to these tests when used as evidence in a court of law

Every Move You Make: Exploring Practical Issues in Smartphone Motion Sensor Fingerprinting and Countermeasures

Directory of Open Access Journals (Sweden)

Das Anupam

2018-01-01

Full Text Available The ability to track users’ activities across different websites and visits is a key tool in advertising and surveillance. The HTML5 DeviceMotion interface creates a new opportunity for such tracking via fingerprinting of smartphone motion sensors. We study the feasibility of carrying out such fingerprinting under real-world constraints and on a large scale. In particular, we collect measurements from several hundred users under realistic scenarios and show that the state-of-the-art techniques provide very low accuracy in these settings. We then improve fingerprinting accuracy by changing the classifier as well as incorporating auxiliary information. We also show how to perform fingerprinting in an open-world scenario where one must distinguish between known and previously unseen users.

Microorganism Identification Based On MALDI-TOF-MS Fingerprints

Science.gov (United States)

Elssner, Thomas; Kostrzewa, Markus; Maier, Thomas; Kruppa, Gary

Advances in MALDI-TOF mass spectrometry have enabled the ­development of a rapid, accurate and specific method for the identification of bacteria directly from colonies picked from culture plates, which we have named the MALDI Biotyper. The picked colonies are placed on a target plate, a drop of matrix solution is added, and a pattern of protein molecular weights and intensities, "the protein fingerprint" of the bacteria, is produced by the MALDI-TOF mass spectrometer. The obtained protein mass fingerprint representing a molecular signature of the microorganism is then matched against a database containing a library of previously measured protein mass fingerprints, and scores for the match to every library entry are produced. An ID is obtained if a score is returned over a pre-set threshold. The sensitivity of the techniques is such that only approximately 104 bacterial cells are needed, meaning that an overnight culture is sufficient, and the results are obtained in minutes after culture. The improvement in time to result over biochemical methods, and the capability to perform a non-targeted identification of bacteria and spores, potentially makes this method suitable for use in the detect-to-treat timeframe in a bioterrorism event. In the case of white-powder samples, the infectious spore is present in sufficient quantity in the powder so that the MALDI Biotyper result can be obtained directly from the white powder, without the need for culture. While spores produce very different patterns from the vegetative colonies of the corresponding bacteria, this problem is overcome by simply including protein fingerprints of the spores in the library. Results on spores can be returned within minutes, making the method suitable for use in the "detect-to-protect" timeframe.

Simultaneous topography and tomography of latent fingerprints using full-field swept-source optical coherence tomography

Science.gov (United States)

Dubey, Satish Kumar; Singh Mehta, Dalip; Anand, Arun; Shakher, Chandra

2008-01-01

We demonstrate simultaneous topography and tomography of latent fingerprints using full-field swept-source optical coherence tomography (OCT). The swept-source OCT system comprises a superluminescent diode (SLD) as broad-band light source, an acousto-optic tunable filter (AOTF) as frequency tuning device, and a compact, nearly common-path interferometer. Both the amplitude and the phase map of the interference fringe signal are reconstructed. Optical sectioning of the latent fingerprint sample is obtained by selective Fourier filtering and the topography is retrieved from the phase map. Interferometry, selective filtering, low coherence and hence better resolution are some of the advantages of the proposed system over the conventional fingerprint detection techniques. The present technique is non-invasive in nature and does not require any physical or chemical processing. Therefore, the quality of the sample does not alter and hence the same fingerprint can be used for other types of forensic test. Exploitation of low-coherence interferometry for fingerprint detection itself provides an edge over other existing techniques as fingerprints can even be lifted from low-reflecting surfaces. The proposed system is very economical and compact.

DactyLoc : A minimally geo-referenced WiFi+GSM-fingerprint-based localization method for positioning in urban spaces

DEFF Research Database (Denmark)

Cujia, Kristian; Wirz, Martin; Kjærgaard, Mikkel Baun

2012-01-01

Fingerprinting-based localization methods relying on WiFi and GSM information provide sufficient localization accuracy for many mobile phone applications. Most of the existing approaches require a training set consisting of geo-referenced fingerprints to build a reference database. We propose...... a collaborative, semi-supervised WiFi+GSM fingerprinting method where only a small fraction of all fingerprints needs to be geo-referenced. Our approach enables indexing of areas in the absence of GPS reception as often found in urban spaces and indoors without manual labeling of fingerprints. The method takes...

Bayesian estimation of multicomponent relaxation parameters in magnetic resonance fingerprinting.

Science.gov (United States)

McGivney, Debra; Deshmane, Anagha; Jiang, Yun; Ma, Dan; Badve, Chaitra; Sloan, Andrew; Gulani, Vikas; Griswold, Mark

2018-07-01

To estimate multiple components within a single voxel in magnetic resonance fingerprinting when the number and types of tissues comprising the voxel are not known a priori. Multiple tissue components within a single voxel are potentially separable with magnetic resonance fingerprinting as a result of differences in signal evolutions of each component. The Bayesian framework for inverse problems provides a natural and flexible setting for solving this problem when the tissue composition per voxel is unknown. Assuming that only a few entries from the dictionary contribute to a mixed signal, sparsity-promoting priors can be placed upon the solution. An iterative algorithm is applied to compute the maximum a posteriori estimator of the posterior probability density to determine the magnetic resonance fingerprinting dictionary entries that contribute most significantly to mixed or pure voxels. Simulation results show that the algorithm is robust in finding the component tissues of mixed voxels. Preliminary in vivo data confirm this result, and show good agreement in voxels containing pure tissue. The Bayesian framework and algorithm shown provide accurate solutions for the partial-volume problem in magnetic resonance fingerprinting. The flexibility of the method will allow further study into different priors and hyperpriors that can be applied in the model. Magn Reson Med 80:159-170, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

Tales from the crypt : Fingerprinting attacks on encrypted channels by way of retainting

NARCIS (Netherlands)

Valkering, Michael; Slowinska, Asia; Bos, Herbert

2009-01-01

Paradoxically, encryption makes it hard to detect, fingerprint and stop exploits. We describe Hassle, a honeypot capable of detecting and fingerprinting monomorphic and polymorphic attacks on encrypted channels. It uses dynamic taint analysis in an emulator to detect attacks, and it tags each

[HPLC fingerprint analysis of flavonoids of phyllanthi fructus from different habitats].

Science.gov (United States)

Wang, Fei; Wang, Shuai; Meng, Xian-sheng; Bao, Yong-rui; Zhu, Ying-huan

2014-11-01

To establish the HPLC fingerprint of flavonoids of Phyllanthi Fructus from different habitats. HPLC method was adopted. The flavonoids composition of Phyllanthi Fructus from 10 different habitats was determined on an Agilent C, chromatographic column with 0. 5% formic acid water (A)-acetonitrile (B) as the mobile phase in gradient elution under the wavelength of 254 nm. The HPLC fingerprints of flavonoids composition of Phyllanthi Fructus were established to evaluate the qualitiy of them. The HPLC fingerprints of flavonoids composition of Phyllanthi Fructus from 10 different habitats were established. 18 common peaks were found and the similarities of them were more than 0. 90 except the ones from Guangxi and Guangdong. The method is simple, accurate and repeatable. It can be used for research and quality control of the effective components in Phyllanthi Fructus.

Cardiovascular effects of saffron and its active constituents: A review article

Directory of Open Access Journals (Sweden)

B. Marjan Razavi

2014-03-01

Full Text Available (Crocus sativus L. Commonly known as saffron, is a perennial stem less herb of the iridaceae family, widely cultivated in Iran and other countries. It is used as a flavoring and coloring agent for many thousands of years. In traditional medicine, saffron has been used for various purposes including abortion, as a fever reducer, an analgesic, expectorant, antispasmodic, aphrodisiac, sedative, digestive and a carminative. Various pharmacological studies have been described that saffron and its constituents exhibit different beneficial properties, including antioxidant, anticancer, anticonvulsant, antiischemic, antigenotoxic, antidote, antiapoptotic, antitussive, antidepressive, sedative and hypnotic, hypolipidemic, antinociceptive and antiinflammatory effects. Research projects have also revealed that saffron also exhibits protective effects against cardiovascular diseases including cardiac ischemia, arrhythmia, hypertension and atherosclerosis. In this review article, the effects of saffron and its active constituents on cardiovascular system were introduced.

DNA fingerprints come to court

International Nuclear Information System (INIS)

Anon.

1988-01-01

DNA fingerprinting, a new technique, which produces a visual representation of a person's genome, enables the identification of perpetrators from as little as a single hair root, providing they have left some biologic evidence-hair, skin cells, blood, or semen-at the scene of the crime. DNA fingerprinting was developed by British geneticist Alec Jeffreys, PhD, in 1985. Jeffreys, professor genetics at the University of Leicester, built upon a discovery, five years earlier, of certain hypervariable regions called minisatellites in unexpressed areas of DNA. The hypervariability was evidenced in the number of repetitions of certain sequences of base pairs. It was this aspect that revealed to Jeffreys something that had eluded other investigators. He realized that these minisatellite regions had a potential for identification far greater than that of conventional genetic markers, which are defined by restriction fragment length polymorphisms (RFLPs). RFLPs are characterized by the substitution of one base pair for another, resulting in the presence or absence of a restriction enzyme site. Thus, each offers a limited number of alleles. In contrast, minisatellite regions have an accordion-like range of length, as the number of repetitions of a given sequence varies widely from person to person

Low-Speed Fingerprint Image Capture System User`s Guide, June 1, 1993

Energy Technology Data Exchange (ETDEWEB)

Whitus, B.R.; Goddard, J.S.; Jatko, W.B.; Manges, W.W.; Treece, D.A.

1993-06-01

The Low-Speed Fingerprint Image Capture System (LS-FICS) uses a Sun workstation controlling a Lenzar ElectroOptics Opacity 1000 imaging system to digitize fingerprint card images to support the Federal Bureau of Investigation`s (FBI`s) Automated Fingerprint Identification System (AFIS) program. The system also supports the operations performed by the Oak Ridge National Laboratory- (ORNL-) developed Image Transmission Network (ITN) prototype card scanning system. The input to the system is a single FBI fingerprint card of the agreed-upon standard format and a user-specified identification number. The output is a file formatted to be compatible with the National Institute of Standards and Technology (NIST) draft standard for fingerprint data exchange dated June 10, 1992. These NIST compatible files contain the required print and text images. The LS-FICS is designed to provide the FBI with the capability of scanning fingerprint cards into a digital format. The FBI will replicate the system to generate a data base of test images. The Host Workstation contains the image data paths and the compression algorithm. A local area network interface, disk storage, and tape drive are used for the image storage and retrieval, and the Lenzar Opacity 1000 scanner is used to acquire the image. The scanner is capable of resolving 500 pixels/in. in both x and y directions. The print images are maintained in full 8-bit gray scale and compressed with an FBI-approved wavelet-based compression algorithm. The text fields are downsampled to 250 pixels/in. and 2-bit gray scale. The text images are then compressed using a lossless Huffman coding scheme. The text fields retrieved from the output files are easily interpreted when displayed on the screen. Detailed procedures are provided for system calibration and operation. Software tools are provided to verify proper system operation.

The wavelet/scalar quantization compression standard for digital fingerprint images

Energy Technology Data Exchange (ETDEWEB)

Bradley, J.N.; Brislawn, C.M.

1994-04-01

A new digital image compression standard has been adopted by the US Federal Bureau of Investigation for use on digitized gray-scale fingerprint images. The algorithm is based on adaptive uniform scalar quantization of a discrete wavelet transform image decomposition and is referred to as the wavelet/scalar quantization standard. The standard produces archival quality images at compression ratios of around 20:1 and will allow the FBI to replace their current database of paper fingerprint cards with digital imagery.

Protein fingerprints of anti-cancer effects of cyclin-dependent kinase inhibition: identification of candidate biomarkers using 2-D liquid phase separation coupled to mass spectrometry

Czech Academy of Sciences Publication Activity Database

Skalníková, Helena; Halada, Petr; Dzubak, P.; Hajdúch, M.; Kovářová, Hana

2005-01-01

Roč. 4, č. 4 (2005), s. 447-454 ISSN 1533-0346 R&D Projects: GA ČR GA301/05/0418 Institutional research plan: CEZ:AV0Z50450515; CEZ:AV0Z50200510 Keywords : protein fingerprints Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 1.677, year: 2005

Machine-assisted verification of latent fingerprints: first results for nondestructive contact-less optical acquisition techniques with a CWL sensor

Science.gov (United States)

Hildebrandt, Mario; Kiltz, Stefan; Krapyvskyy, Dmytro; Dittmann, Jana; Vielhauer, Claus; Leich, Marcus

2011-11-01

A machine-assisted analysis of traces from crime scenes might be possible with the advent of new high-resolution non-destructive contact-less acquisition techniques for latent fingerprints. This requires reliable techniques for the automatic extraction of fingerprint features from latent and exemplar fingerprints for matching purposes using pattern recognition approaches. Therefore, we evaluate the NIST Biometric Image Software for the feature extraction and verification of contact-lessly acquired latent fingerprints to determine potential error rates. Our exemplary test setup includes 30 latent fingerprints from 5 people in two test sets that are acquired from different surfaces using a chromatic white light sensor. The first test set includes 20 fingerprints on two different surfaces. It is used to determine the feature extraction performance. The second test set includes one latent fingerprint on 10 different surfaces and an exemplar fingerprint to determine the verification performance. This utilized sensing technique does not require a physical or chemical visibility enhancement of the fingerprint residue, thus the original trace remains unaltered for further investigations. No particular feature extraction and verification techniques have been applied to such data, yet. Hence, we see the need for appropriate algorithms that are suitable to support forensic investigations.

Coomassie Brilliant Blue G-250 Dye: An Application for Forensic Fingerprint Analysis.

Science.gov (United States)

Brunelle, Erica; Le, Anh Minh; Huynh, Crystal; Wingfield, Kelly; Halámková, Lenka; Agudelo, Juliana; Halámek, Jan

2017-04-04

The Bradford reagent, comprised of the Coomassie Brilliant Blue G-250 dye, methanol, and phosphoric acid, has been traditionally used for quantifying proteins. Use of this reagent in the Bradford assay relies on the binding of the Coomassie Blue G-250 dye to proteins. However, the ability of the dye to react with a small group of amino acids (arginine, histidine, lysine, phenylalanine, tyrosine, and tryptophan) makes it a viable chemical assay for fingerprint analysis in order to identify the biological sex of the fingerprint originator. It is recognized that the identification of biological sex has been readily accomplished using two other methods; however, both of those systems are reliant upon a large group of amino acids, 23 to be precise. The Bradford assay, described here, was developed specifically to aid in the transition from targeting large groups of amino acids, as demonstrated in the previous studies, to targeting only a single amino acid without compromising the intensity of the response and/or the ability to differentiate between two attributes. In this work, we aim to differentiate between female fingerprints and male fingerprints.

Re-examining the basis for source discrimination and data corrections used by sediment fingerprinting studies in agricultural catchments

Science.gov (United States)

Smith, Hugh; Blake, Will

2014-05-01

The sediment fingerprinting technique has been widely used in agricultural catchments to quantify fine sediment contributions from various land use sources. This application of the technique depends on the key assumption that land-use source signatures imprinted on catchment soils are decipherable from those due to other landscape factors affecting soil and sediment properties. We re-examine this key assumption by investigating (i) the physical and chemical basis for source discrimination and (ii) potential factors that may confound source un-mixing in agricultural catchments, including particle size and organic matter effects on tracer properties. The study is situated in the River Tamar, a predominantly agricultural catchment in south-west England that has also been affected by mining. Source discrimination focused on pasture and cultivated land uses and channel banks. Monthly, time-integrated suspended sediment samples were collected across seven catchments for a 12-month period. Physical and chemical properties measured in source soils and sediment included fallout radionuclides, major and minor element geochemical constituents, total organic carbon and particle size. Source discrimination was entirely dependent on differences in tracer property concentrations between surface and sub-surface soils. This is based on fallout radionuclide concentrations that are surface-elevated, while many geochemical properties are surface-depleted due to weathering and pedogenetic effects, although surface soil contamination can reverse this trend. Source discrimination in the study catchments was limited by (i) rotation of cultivated and pasture fields resulting in reduced differences between these two sources and (ii) the cultivated source signature resembling a mix of the pasture and channel bank sources for many tracer properties. Furthermore, metal pollution from abandoned historic mines and organic enrichment of sediment from areas of peaty soil resulted in the non

Towards a Video Passive Content Fingerprinting Method for Partial-Copy Detection Robust against Non-Simulated Attacks.

Directory of Open Access Journals (Sweden)

Zobeida Jezabel Guzman-Zavaleta

Full Text Available Passive content fingerprinting is widely used for video content identification and monitoring. However, many challenges remain unsolved especially for partial-copies detection. The main challenge is to find the right balance between the computational cost of fingerprint extraction and fingerprint dimension, without compromising detection performance against various attacks (robustness. Fast video detection performance is desirable in several modern applications, for instance, in those where video detection involves the use of large video databases or in applications requiring real-time video detection of partial copies, a process whose difficulty increases when videos suffer severe transformations. In this context, conventional fingerprinting methods are not fully suitable to cope with the attacks and transformations mentioned before, either because the robustness of these methods is not enough or because their execution time is very high, where the time bottleneck is commonly found in the fingerprint extraction and matching operations. Motivated by these issues, in this work we propose a content fingerprinting method based on the extraction of a set of independent binary global and local fingerprints. Although these features are robust against common video transformations, their combination is more discriminant against severe video transformations such as signal processing attacks, geometric transformations and temporal and spatial desynchronization. Additionally, we use an efficient multilevel filtering system accelerating the processes of fingerprint extraction and matching. This multilevel filtering system helps to rapidly identify potential similar video copies upon which the fingerprint process is carried out only, thus saving computational time. We tested with datasets of real copied videos, and the results show how our method outperforms state-of-the-art methods regarding detection scores. Furthermore, the granularity of our method makes

Acquiring a 2D rolled equivalent fingerprint image from a non-contact 3D finger scan

Science.gov (United States)

Fatehpuria, Abhishika; Lau, Daniel L.; Hassebrook, Laurence G.

2006-04-01

The use of fingerprints as a biometric is both the oldest mode of computer aided personal identification and the most relied-upon technology in use today. But current fingerprint scanning systems have some challenging and peculiar difficulties. Often skin conditions and imperfect acquisition circumstances cause the captured fingerprint image to be far from ideal. Also some of the acquisition techniques can be slow and cumbersome to use and may not provide the complete information required for reliable feature extraction and fingerprint matching. Most of the difficulties arise due to the contact of the fingerprint surface with the sensor platen. To attain a fast-capture, non-contact, fingerprint scanning technology, we are developing a scanning system that employs structured light illumination as a means for acquiring a 3-D scan of the finger with sufficiently high resolution to record ridge-level details. In this paper, we describe the postprocessing steps used for converting the acquired 3-D scan of the subject's finger into a 2-D rolled equivalent image.

Multi-wavelength HPLC fingerprints from complex substances: An exploratory chemometrics study of the Cassia seed example

Energy Technology Data Exchange (ETDEWEB)

Ni Yongnian, E-mail: ynni@ncu.edu.cn [Stake Laboratory of Food Science and Technology, Nanchang University, Nanchang, Jiangxi 330047 (China); Department of Chemistry, Nanchang University, Nanchang, Jiangxi 330047 (China); Lai Yanhua [Department of Chemistry, Nanchang University, Nanchang, Jiangxi 330047 (China); Brandes, Sarina; Kokot, Serge [Applied Chemistry Cluster, School of Physical and Chemical Sciences, Queensland University of Technology, Brisbane, Queensland 4001 (Australia)

2009-08-11

Multi-wavelength fingerprints of Cassia seed, a traditional Chinese medicine (TCM), were collected by high-performance liquid chromatography (HPLC) at two wavelengths with the use of diode array detection. The two data sets of chromatograms were combined by the data fusion-based method. This data set of fingerprints was compared separately with the two data sets collected at each of the two wavelengths. It was demonstrated with the use of principal component analysis (PCA), that multi-wavelength fingerprints provided a much improved representation of the differences in the samples. Thereafter, the multi-wavelength fingerprint data set was submitted for classification to a suite of chemometrics methods viz. fuzzy clustering (FC), SIMCA and the rank ordering MCDM PROMETHEE and GAIA. Each method highlighted different properties of the data matrix according to the fingerprints from different types of Cassia seeds. In general, the PROMETHEE and GAIA MCDM methods provided the most comprehensive information for matching and discrimination of the fingerprints, and appeared to be best suited for quality assurance purposes for these and similar types of sample.

Multi-wavelength HPLC fingerprints from complex substances: An exploratory chemometrics study of the Cassia seed example

International Nuclear Information System (INIS)

Ni Yongnian; Lai Yanhua; Brandes, Sarina; Kokot, Serge

2009-01-01

Multi-wavelength fingerprints of Cassia seed, a traditional Chinese medicine (TCM), were collected by high-performance liquid chromatography (HPLC) at two wavelengths with the use of diode array detection. The two data sets of chromatograms were combined by the data fusion-based method. This data set of fingerprints was compared separately with the two data sets collected at each of the two wavelengths. It was demonstrated with the use of principal component analysis (PCA), that multi-wavelength fingerprints provided a much improved representation of the differences in the samples. Thereafter, the multi-wavelength fingerprint data set was submitted for classification to a suite of chemometrics methods viz. fuzzy clustering (FC), SIMCA and the rank ordering MCDM PROMETHEE and GAIA. Each method highlighted different properties of the data matrix according to the fingerprints from different types of Cassia seeds. In general, the PROMETHEE and GAIA MCDM methods provided the most comprehensive information for matching and discrimination of the fingerprints, and appeared to be best suited for quality assurance purposes for these and similar types of sample.

Multi-wavelength HPLC fingerprints from complex substances: An exploratory chemometrics study of the Cassia seed example.

Science.gov (United States)

Ni, Yongnian; Lai, Yanhua; Brandes, Sarina; Kokot, Serge

2009-08-11

Multi-wavelength fingerprints of Cassia seed, a traditional Chinese medicine (TCM), were collected by high-performance liquid chromatography (HPLC) at two wavelengths with the use of diode array detection. The two data sets of chromatograms were combined by the data fusion-based method. This data set of fingerprints was compared separately with the two data sets collected at each of the two wavelengths. It was demonstrated with the use of principal component analysis (PCA), that multi-wavelength fingerprints provided a much improved representation of the differences in the samples. Thereafter, the multi-wavelength fingerprint data set was submitted for classification to a suite of chemometrics methods viz. fuzzy clustering (FC), SIMCA and the rank ordering MCDM PROMETHEE and GAIA. Each method highlighted different properties of the data matrix according to the fingerprints from different types of Cassia seeds. In general, the PROMETHEE and GAIA MCDM methods provided the most comprehensive information for matching and discrimination of the fingerprints, and appeared to be best suited for quality assurance purposes for these and similar types of sample.

Chemical Compositions, Chromatographic Fingerprints and Antioxidant Activities of Andrographis Herba

Directory of Open Access Journals (Sweden)

Yang Zhao

2014-11-01

Full Text Available This paper describes the development of an HPLC-UV-MS method for quantitative determination of andrographolide and dehydroandrographolide in Andrographis Herba and establishment of its chromatographic fingerprint. The method was validated for linearity, limit of detection and quantification, inter- and intra-day precisions, repeatability, stability and recovery. All the validation results of quantitative determination and fingerprinting methods were satisfactory. The developed method was then applied to assay the contents of andrographolide and dehydroandrographolide and to acquire the fingerprints of all the collected Andrographis Herba samples. Furthermore, similarity analysis and principal component analysis were used to reveal the similarities and differences between the samples on the basis of the characteristic peaks. More importantly, the DPPH free radical-scavenging and ferric reducing capacities of the Andrographis Herba samples were assayed. By bivariate correlation analysis, we found that six compounds are positively correlated to DPPH free radical scavenging and ferric reducing capacities, and four compounds are negatively correlated to DPPH free radical scavenging and ferric reducing capacities.

Development of spectrophotometric fingerprinting method for ...

African Journals Online (AJOL)

Selective and efficient analytical methods are required not only for quality assurance but also for authentication of herbal formulations. A simple, rapid and validated fingerprint method has developed for estimation of piperine in 'Talisadi churna', a well known herbal formulation in India. The estimation was carried out in two ...

Feasibility of correlation mapping optical coherence tomography (cmOCT) for anti-spoof sub-surface fingerprinting.

Science.gov (United States)

Zam, Azhar; Dsouza, Roshan; Subhash, Hrebesh M; O'Connell, Marie-Louise; Enfield, Joey; Larin, Kirill; Leahy, Martin J

2013-09-01

We propose the use of correlation mapping optical coherence tomography (cmOCT) to deliver additional biometrics associated with the finger that could complement existing fingerprint technology for law enforcement applications. The current study extends the existing fingerprint paradigm by measuring additional biometrics associated with sub-surface finger tissue such as sub-surface fingerprints, sweat glands, and the pattern of the capillary bed to yield a user-friendly cost effective and anti-spoof multi-mode biometric solution associated with the finger. To our knowledge no other method has been able to capture sub-surface fingerprint, papillary pattern and horizontal vessel pattern in a single scan or to show the correspondence between these patterns in live adult human fingertip. Unlike many current technologies this approach incorporates 'liveness' testing by default. The ultimate output is a biometric module which is difficult to defeat and complements fingerprint scanners that currently are used in border control and law enforcement applications. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Ferroelastic Fingerprints in Methylammonium Lead Iodide Perovskite

KAUST Repository

Hermes, Ilka M.; Bretschneider, Simon A.; Bergmann, Victor W.; Li, Dan; Klasen, Alexander; Mars, Julian; Tremel, Wolfgang; Laquai, Fré dé ric; Butt, Hans-Jü rgen; Mezger, Markus; Berger, Rü diger; Rodriguez, Brian J.; Weber, Stefan A. L.

2016-01-01

sample orientations with x-ray diffraction, the preferred domain orientation was suggested to be the a1-a2-phase. The observation of these ferroelastic fingerprints appears to strongly depend on the film texture and thus the preparation route

Validation of Passive Sampling Devices for Monitoring of Munitions Constituents in Underwater Environments

Science.gov (United States)

2017-06-30

Research and Development Program [SERDP] project #ER-2542) into the canister would provide enhancement of the quantitative estimation of the TWA...Department of Defense EOD Explosive Ordnance Disposal EPA United States Environmental Protection Agency EQL Environmental Quantitation Limit EST...Laboratory Quantitation Limit MC Munitions Constituents mL Milliliter MR Munitions Response NESDI Navy’s Environmental Security Development to

Fingerprint classification using a simplified rule-set based on directional patterns and singularity features

CSIR Research Space (South Africa)

Dorasamy, K

2015-07-01

Full Text Available The use of directional patterns has recently received more attention in fingerprint classification. It provides a global representation of a fingerprint, by dividing it into homogeneous orientation partitions. With this technique, the challenge...

Fingerprint analysis of polysaccharides from different Ganoderma by HPLC combined with chemometrics methods.

Science.gov (United States)

Sun, Xiaomei; Wang, Haohao; Han, Xiaofeng; Chen, Shangwei; Zhu, Song; Dai, Jun

2014-12-19

A fingerprint analysis method has been developed for characterization and discrimination of polysaccharides from different Ganoderma by high performance liquid chromatography (HPLC) coupled with chemometrics means. The polysaccharides were extracted under ultrasonic-assisted condition, and then partly hydrolyzed with trifluoroacetic acid. Monosaccharides and oligosaccharides in the hydrolyzates were subjected to pre-column derivatization with 1-phenyl-3-methyl-5-pyrazolone and HPLC analysis, which will generate unique fingerprint information related to chemical composition and structure of polysaccharides. The peak data were imported to professional software in order to obtain standard fingerprint profiles and evaluate similarity of different samples. Meanwhile, the data were further processed by hierarchical cluster analysis and principal component analysis. Polysaccharides from different parts or species of Ganoderma or polysaccharides from the same parts of Ganoderma but from different geographical regions or different strains could be differentiated clearly. This fingerprint analysis method can be applied to identification and quality control of different Ganoderma and their products. Copyright © 2014 Elsevier Ltd. All rights reserved.

Optical image encryption using QR code and multilevel fingerprints in gyrator transform domains

Science.gov (United States)

Wei, Yang; Yan, Aimin; Dong, Jiabin; Hu, Zhijuan; Zhang, Jingtao

2017-11-01

A new concept of GT encryption scheme is proposed in this paper. We present a novel optical image encryption method by using quick response (QR) code and multilevel fingerprint keys in gyrator transform (GT) domains. In this method, an original image is firstly transformed into a QR code, which is placed in the input plane of cascaded GTs. Subsequently, the QR code is encrypted into the cipher-text by using multilevel fingerprint keys. The original image can be obtained easily by reading the high-quality retrieved QR code with hand-held devices. The main parameters used as private keys are GTs' rotation angles and multilevel fingerprints. Biometrics and cryptography are integrated with each other to improve data security. Numerical simulations are performed to demonstrate the validity and feasibility of the proposed encryption scheme. In the future, the method of applying QR codes and fingerprints in GT domains possesses much potential for information security.

Efficiency and Flexibility of Fingerprint Scheme Using Partial Encryption and Discrete Wavelet Transform to Verify User in Cloud Computing.

Science.gov (United States)

Yassin, Ali A

2014-01-01

Now, the security of digital images is considered more and more essential and fingerprint plays the main role in the world of image. Furthermore, fingerprint recognition is a scheme of biometric verification that applies pattern recognition techniques depending on image of fingerprint individually. In the cloud environment, an adversary has the ability to intercept information and must be secured from eavesdroppers. Unluckily, encryption and decryption functions are slow and they are often hard. Fingerprint techniques required extra hardware and software; it is masqueraded by artificial gummy fingers (spoof attacks). Additionally, when a large number of users are being verified at the same time, the mechanism will become slow. In this paper, we employed each of the partial encryptions of user's fingerprint and discrete wavelet transform to obtain a new scheme of fingerprint verification. Moreover, our proposed scheme can overcome those problems; it does not require cost, reduces the computational supplies for huge volumes of fingerprint images, and resists well-known attacks. In addition, experimental results illustrate that our proposed scheme has a good performance of user's fingerprint verification.

HPLC fingerprint analysis combined with chemometrics for pattern recognition of ginger.

Science.gov (United States)

Feng, Xu; Kong, Weijun; Wei, Jianhe; Ou-Yang, Zhen; Yang, Meihua

2014-03-01

Ginger, the fresh rhizome of Zingiber officinale Rosc. (Zingiberaceae), has been used worldwide; however, for a long time, there has been no standard approbated internationally for its quality control. To establish an efficacious and combinational method and pattern recognition technique for quality control of ginger. A simple, accurate and reliable method based on high-performance liquid chromatography with photodiode array (HPLC-PDA) detection was developed for establishing the chemical fingerprints of 10 batches of ginger from different markets in China. The method was validated in terms of precision, reproducibility and stability; and the relative standard deviations were all less than 1.57%. On the basis of this method, the fingerprints of 10 batches of ginger samples were obtained, which showed 16 common peaks. Coupled with similarity evaluation software, the similarities between each fingerprint of the sample and the simulative mean chromatogram were in the range of 0.998-1.000. Then, the chemometric techniques, including similarity analysis, hierarchical clustering analysis and principal component analysis were applied to classify the ginger samples. Consistent results were obtained to show that ginger samples could be successfully classified into two groups. This study revealed that HPLC-PDA method was simple, sensitive and reliable for fingerprint analysis, and moreover, for pattern recognition and quality control of ginger.

Evaluating the change of directional patterns for fingerprints with missing singular points under rotation

CSIR Research Space (South Africa)

Dorasamy, Kribashnee

2016-12-01

Full Text Available Overcoming small inter-class variation when fingerprints have missing singular points (SPs) is one of the current challenges faced in fingerprint classification, since class information is scarce. Grouping the orientation fields to form Directional...

The FBI compression standard for digitized fingerprint images

Energy Technology Data Exchange (ETDEWEB)

Brislawn, C.M.; Bradley, J.N. [Los Alamos National Lab., NM (United States); Onyshczak, R.J. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Hopper, T. [Federal Bureau of Investigation, Washington, DC (United States)

1996-10-01

The FBI has formulated national standards for digitization and compression of gray-scale fingerprint images. The compression algorithm for the digitized images is based on adaptive uniform scalar quantization of a discrete wavelet transform subband decomposition, a technique referred to as the wavelet/scalar quantization method. The algorithm produces archival-quality images at compression ratios of around 15 to 1 and will allow the current database of paper fingerprint cards to be replaced by digital imagery. A compliance testing program is also being implemented to ensure high standards of image quality and interchangeability of data between different implementations. We will review the current status of the FBI standard, including the compliance testing process and the details of the first-generation encoder.

Integral criteria for large-scale multiple fingerprint solutions

Science.gov (United States)

Ushmaev, Oleg S.; Novikov, Sergey O.

2004-08-01

We propose the definition and analysis of the optimal integral similarity score criterion for large scale multmodal civil ID systems. Firstly, the general properties of score distributions for genuine and impostor matches for different systems and input devices are investigated. The empirical statistics was taken from the real biometric tests. Then we carry out the analysis of simultaneous score distributions for a number of combined biometric tests and primary for ultiple fingerprint solutions. The explicit and approximate relations for optimal integral score, which provides the least value of the FRR while the FAR is predefined, have been obtained. The results of real multiple fingerprint test show good correspondence with the theoretical results in the wide range of the False Acceptance and the False Rejection Rates.

Recovery of DNA and fingerprints from touched documents.

Science.gov (United States)

Sewell, Jonathan; Quinones, Ignacio; Ames, Carole; Multaney, Bryan; Curtis, Stuart; Seeboruth, Haj; Moore, Stephen; Daniel, Barbara

2008-09-01

This study investigated the various factors affecting DNA profiling from DNA recovered from fingerprints deposited on paper before and after fingerprint enhancement treatments. The DNeasy plant mini kit (QIAGEN) was found to improve DNA recovery from paper by over 150% compared with the QIAamp mini kit. A significant decrease in the amount of DNA recovered was observed following treatment with DFO and/or Ninhydrin. This decrease in yield did not have a comparably significant effect on the quality of the SGM Plus profiles. Furthermore, this study found that whilst certain paper types, such as newspaper, magazine and filter paper allowed for the good recovery of DNA, common office paper and white card, strongly interfered with the recovery of DNA resulting in poor quality profiles.

Integrating Fingerprint Verification into the Smart Card-Based Healthcare Information System

OpenAIRE

Jin-Won Park; Sung Bum Pan; Yongwha Chung; Daesung Moon

2009-01-01

As VLSI technology has been improved, a smart card employing 32-bit processors has been released, and more personal information such as medical, financial data can be stored in the card. Thus, it becomes important to protect personal information stored in the card. Verification of the card holder's identity using a fingerprint has advantages over the present practices of Personal Identification Numbers (PINs) and passwords. However, the computational workload of fingerprint verification i...

Infrared Spectroscopy as a Chemical Fingerprinting Tool

Science.gov (United States)

Huff, Timothy L.

2003-01-01

Infrared (IR) spectroscopy is a powerful analytical tool in the chemical fingerprinting of materials. Any sample material that will interact with infrared light produces a spectrum and, although normally associated with organic materials, inorganic compounds may also be infrared active. The technique is rapid, reproducible and usually non-invasive to the sample. That it is non-invasive allows for additional characterization of the original material using other analytical techniques including thermal analysis and RAMAN spectroscopic techniques. With the appropriate accessories, the technique can be used to examine samples in liquid, solid or gas phase. Both aqueous and non-aqueous free-flowing solutions can be analyzed, as can viscous liquids such as heavy oils and greases. Solid samples of varying sizes and shapes may also be examined and with the addition of microscopic IR (microspectroscopy) capabilities, minute materials such as single fibers and threads may be analyzed. With the addition of appropriate software, microspectroscopy can be used for automated discrete point or compositional surface area mapping, with the latter providing a means to record changes in the chemical composition of a material surface over a defined area. Due to the ability to characterize gaseous samples, IR spectroscopy can also be coupled with thermal processes such as thermogravimetric (TG) analyses to provide both thermal and chemical data in a single run. In this configuration, solids (or liquids) heated in a TG analyzer undergo decomposition, with the evolving gases directed into the IR spectrometer. Thus, information is provided on the thermal properties of a material and the order in which its chemical constituents are broken down during incremental heating. Specific examples of these varied applications will be cited, with data interpretation and method limitations further discussed.

Application of a clustering-based peak alignment algorithm to analyze various DNA fingerprinting data.

Science.gov (United States)

Ishii, Satoshi; Kadota, Koji; Senoo, Keishi

2009-09-01

DNA fingerprinting analysis such as amplified ribosomal DNA restriction analysis (ARDRA), repetitive extragenic palindromic PCR (rep-PCR), ribosomal intergenic spacer analysis (RISA), and denaturing gradient gel electrophoresis (DGGE) are frequently used in various fields of microbiology. The major difficulty in DNA fingerprinting data analysis is the alignment of multiple peak sets. We report here an R program for a clustering-based peak alignment algorithm, and its application to analyze various DNA fingerprinting data, such as ARDRA, rep-PCR, RISA, and DGGE data. The results obtained by our clustering algorithm and by BioNumerics software showed high similarity. Since several R packages have been established to statistically analyze various biological data, the distance matrix obtained by our R program can be used for subsequent statistical analyses, some of which were not previously performed but are useful in DNA fingerprinting studies.

Damage invariant and high security acquisition of the internal fingerprint using optical coherence tomography

CSIR Research Space (South Africa)

Darlow, Luke N

2016-11-01

Full Text Available representation they offer. Using an emerging fingerprint acquisition technology – optical coherence tomography – to access an internal fingerprint under the skin surface, this paper serves to address two limitations of conventional scanners: fingertip skin damage...

Novel nanoporous sorbent for solid-phase extraction in petroleum fingerprinting

Science.gov (United States)

Alayande, S. Oluwagbemiga; Hlengilizwe, Nyoni; Dare, E. Olugbenga; Msagati, Titus A. M.; Akinlabi, A. Kehinde; Aiyedun, P. O.

2016-04-01

Sample preparation is crucial in the analysis of petroleum and its derivatives. In this study, developing affordable sorbent for petroleum fingerprinting analysis using polymer waste such expanded polystyrene was explored. The potential of electrospun expanded polystyrene (EPS) as a sorbent for the solid-phase extraction (SPE) technique was investigated, and its efficiency was compared with commercial cartridges such as alumina, silica and alumina/silica hybrid commercial for petroleum fingerprinting analysis. The chromatograms showed that the packed electrospun EPS fibre demonstrated excellent properties for SPE applications relative to the hybrid cartridges.

Distortion analysis on binary representation of minutiae based fingerprint matching for match-on-card

CSIR Research Space (South Africa)

Mlambo, CS

2016-12-01

Full Text Available The fingerprint matching on the smart card has long been developed and recognized faster method than fingerprint matching on a computer or large capacity systems. There has been much research and activities concerned with improving the accuracy...

Array-based techniques for fingerprinting medicinal herbs

Directory of Open Access Journals (Sweden)

Xue Charlie

2011-05-01

Full Text Available Abstract Poor quality control of medicinal herbs has led to instances of toxicity, poisoning and even deaths. The fundamental step in quality control of herbal medicine is accurate identification of herbs. Array-based techniques have recently been adapted to authenticate or identify herbal plants. This article reviews the current array-based techniques, eg oligonucleotides microarrays, gene-based probe microarrays, Suppression Subtractive Hybridization (SSH-based arrays, Diversity Array Technology (DArT and Subtracted Diversity Array (SDA. We further compare these techniques according to important parameters such as markers, polymorphism rates, restriction enzymes and sample type. The applicability of the array-based methods for fingerprinting depends on the availability of genomics and genetics of the species to be fingerprinted. For the species with few genome sequence information but high polymorphism rates, SDA techniques are particularly recommended because they require less labour and lower material cost.

Lead (Pb) isotopic fingerprinting and its applications in lead pollution studies in China: A review

International Nuclear Information System (INIS)

Cheng Hefa; Hu Yuanan

2010-01-01

As the most widely scattered toxic metal in the world, the sources of lead (Pb) observed in contamination investigation are often difficult to identify. This review presents an overview of the principles, analysis, and applications of Pb isotopic fingerprinting in tracing the origins and transport pathways of Pb in the environment. It also summarizes the history and current status of lead pollution in China, and illustrates the power of Pb isotopic fingerprinting with examples of its recent applications in investigating the effectiveness of leaded gasoline phase-out on atmospheric lead pollution, and the sources of Pb found in various environmental media (plants, sediments, and aquatic organisms) in China. The limitations of Pb isotopic fingerprinting technique are discussed and a perspective on its development is also presented. Further methodological developments and more widespread instrument availability are expected to make isotopic fingerprinting one of the key tools in lead pollution investigation. - This review presents an overview of the principles, applications, and limitations of Pb isotopic fingerprinting in lead pollution investigation, and provides a perspective on its future development.

Resinous constituent extracting process

Energy Technology Data Exchange (ETDEWEB)

Sayer, W F

1947-10-07

The method of recovering oily constituents from coal or oil shale comprising the saturation of coal or oil shale in a sealed vessel with an organic solution having a boiling point at atmospheric pressure of not exceeding 220/sup 0/C, elevating the temperature within the vessel to a temperature below the cracking temperature of the constituents and maintaining the pressure within the vessel below 51 pounds, to extract the oily material from the coal or oil shale and subsequently separating the solvent from the oily material.

The spectroscopic detection of drugs of abuse in fingerprints after development with powders and recovery with adhesive lifters

OpenAIRE

West, M.J.; Went, Michael J.

2009-01-01

The application of powders to fingerprints has long been established as an effective and reliable method\\ud for developing latent fingerprints. Fingerprints developed in situ at a crime scene routinely undergo lifting\\ud with specialist tapes and are then stored in evidence bags to allow secure transit and also to preserve the\\ud chain of evidence. In a previous study we have shown that exogenous material within a fingerprint can\\ud be detected using Raman spectroscopy following development w...

Score level fusion scheme based on adaptive local Gabor features for face-iris-fingerprint multimodal biometric

Science.gov (United States)

He, Fei; Liu, Yuanning; Zhu, Xiaodong; Huang, Chun; Han, Ye; Chen, Ying

2014-05-01

A multimodal biometric system has been considered a promising technique to overcome the defects of unimodal biometric systems. We have introduced a fusion scheme to gain a better understanding and fusion method for a face-iris-fingerprint multimodal biometric system. In our case, we use particle swarm optimization to train a set of adaptive Gabor filters in order to achieve the proper Gabor basic functions for each modality. For a closer analysis of texture information, two different local Gabor features for each modality are produced by the corresponding Gabor coefficients. Next, all matching scores of the two Gabor features for each modality are projected to a single-scalar score via a trained, supported, vector regression model for a final decision. A large-scale dataset is formed to validate the proposed scheme using the Facial Recognition Technology database-fafb and CASIA-V3-Interval together with FVC2004-DB2a datasets. The experimental results demonstrate that as well as achieving further powerful local Gabor features of multimodalities and obtaining better recognition performance by their fusion strategy, our architecture also outperforms some state-of-the-art individual methods and other fusion approaches for face-iris-fingerprint multimodal biometric systems.

A comparison of fingerprint sweat corrosion of different alloys of brass.

Science.gov (United States)

Sykes, Stephanie; Bond, John W

2013-01-01

Fingerprint sweat from 40 donors was deposited onto samples of five α and α + β phase brasses, comprising five alloys with different copper and zinc concentrations, two of which also had the addition of small concentrations of lead. Visual grading of the visibility of the corrosion revealed that brasses with the least amount of zinc produced the most visible and fully formed fingerprints from the most donors. Consideration of previously reported mechanisms for the corrosion of brass suggests red copper (I) oxide as a likely corrosion product for low zinc brasses, and a consideration of the color, composition, and solubility of fingerprint sweat corrosion products suggests that copper (I) oxide produces good contrast and visibility with the brass substrate. Scanning electron microscope images of the corrosion of all five alloys confirmed the enhanced contrast between corroded and uncorroded areas for low zinc alloys. © 2012 American Academy of Forensic Sciences.

Using Py-GC/MS to fingerprint additives associated with paper mill effluent toxicity episodes

CSIR Research Space (South Africa)

Sithole, Bruce

2012-10-01

Full Text Available techniques applicable to mill effluents such as gas chromatography. Py-GC/MS is a powerful analytical technique that can be used to fingerprint these additives. The presence of the additives is confirmed by fingerprint pyrograms of the additives (or...

Forensic comparison and matching of fingerprints: using quantitative image measures for estimating error rates through understanding and predicting difficulty.

Directory of Open Access Journals (Sweden)

Philip J Kellman

Full Text Available Latent fingerprint examination is a complex task that, despite advances in image processing, still fundamentally depends on the visual judgments of highly trained human examiners. Fingerprints collected from crime scenes typically contain less information than fingerprints collected under controlled conditions. Specifically, they are often noisy and distorted and may contain only a portion of the total fingerprint area. Expertise in fingerprint comparison, like other forms of perceptual expertise, such as face recognition or aircraft identification, depends on perceptual learning processes that lead to the discovery of features and relations that matter in comparing prints. Relatively little is known about the perceptual processes involved in making comparisons, and even less is known about what characteristics of fingerprint pairs make particular comparisons easy or difficult. We measured expert examiner performance and judgments of difficulty and confidence on a new fingerprint database. We developed a number of quantitative measures of image characteristics and used multiple regression techniques to discover objective predictors of error as well as perceived difficulty and confidence. A number of useful predictors emerged, and these included variables related to image quality metrics, such as intensity and contrast information, as well as measures of information quantity, such as the total fingerprint area. Also included were configural features that fingerprint experts have noted, such as the presence and clarity of global features and fingerprint ridges. Within the constraints of the overall low error rates of experts, a regression model incorporating the derived predictors demonstrated reasonable success in predicting objective difficulty for print pairs, as shown both in goodness of fit measures to the original data set and in a cross validation test. The results indicate the plausibility of using objective image metrics to predict expert

Forensic comparison and matching of fingerprints: using quantitative image measures for estimating error rates through understanding and predicting difficulty.

Science.gov (United States)

Kellman, Philip J; Mnookin, Jennifer L; Erlikhman, Gennady; Garrigan, Patrick; Ghose, Tandra; Mettler, Everett; Charlton, David; Dror, Itiel E

2014-01-01

Latent fingerprint examination is a complex task that, despite advances in image processing, still fundamentally depends on the visual judgments of highly trained human examiners. Fingerprints collected from crime scenes typically contain less information than fingerprints collected under controlled conditions. Specifically, they are often noisy and distorted and may contain only a portion of the total fingerprint area. Expertise in fingerprint comparison, like other forms of perceptual expertise, such as face recognition or aircraft identification, depends on perceptual learning processes that lead to the discovery of features and relations that matter in comparing prints. Relatively little is known about the perceptual processes involved in making comparisons, and even less is known about what characteristics of fingerprint pairs make particular comparisons easy or difficult. We measured expert examiner performance and judgments of difficulty and confidence on a new fingerprint database. We developed a number of quantitative measures of image characteristics and used multiple regression techniques to discover objective predictors of error as well as perceived difficulty and confidence. A number of useful predictors emerged, and these included variables related to image quality metrics, such as intensity and contrast information, as well as measures of information quantity, such as the total fingerprint area. Also included were configural features that fingerprint experts have noted, such as the presence and clarity of global features and fingerprint ridges. Within the constraints of the overall low error rates of experts, a regression model incorporating the derived predictors demonstrated reasonable success in predicting objective difficulty for print pairs, as shown both in goodness of fit measures to the original data set and in a cross validation test. The results indicate the plausibility of using objective image metrics to predict expert performance and

Hazardous constituent source term. Revision 2

International Nuclear Information System (INIS)

1994-01-01

The Department of Energy (DOE) has several facilities that either generate and/or store transuranic (TRU)-waste from weapons program research and production. Much of this waste also contains hazardous waste constituents as regulated under Subtitle C of the Resource Conservation and Recovery Act (RCRA). Toxicity characteristic metals in the waste principally include lead, occurring in leaded rubber gloves and shielding. Other RCRA metals may occur as contaminants in pyrochemical salt, soil, debris, and sludge and solidified liquids, as well as in equipment resulting from decontamination and decommissioning activities. Volatile organic compounds (VOCS) contaminate many waste forms as a residue adsorbed on surfaces or occur in sludge and solidified liquids. Due to the presence of these hazardous constituents, applicable disposal regulations include land disposal restrictions established by Hazardous and Solid Waste Amendments (HSWA). The DOE plans to dispose of TRU-mixed waste from the weapons program in the Waste Isolation Pilot Plant (WIPP) by demonstrating no-migration of hazardous constituents. This paper documents the current technical basis for methodologies proposed to develop a post-closure RCRA hazardous constituent source term. For the purposes of demonstrating no-migration, the hazardous constituent source term is defined as the quantities of hazardous constituents that are available for transport after repository closure. Development of the source term is only one of several activities that will be involved in the no-migration demonstration. The demonstration will also include uncertainty and sensitivity analyses of contaminant transport

Peptide Mass Fingerprinting of Egg White Proteins

Science.gov (United States)

Alty, Lisa T.; LaRiviere, Frederick J.

2016-01-01

Use of advanced mass spectrometry techniques in the undergraduate setting has burgeoned in the past decade. However, relatively few undergraduate experiments examine the proteomics tools of protein digestion, peptide accurate mass determination, and database searching, also known as peptide mass fingerprinting. In this experiment, biochemistry…

Evaluation of three methods for DNA fingerprinting of Corynebacterium pseudotuberculosis strains isolated from goats in Poland.

Science.gov (United States)

Stefańska, Ilona; Rzewuska, Magdalena; Binek, Marian

2008-01-01

Phenotypic approaches based on metabolic and biological characteristics of Corynebacterium pseudotuberculosis have been limited due to insufficient discrimination between closely related isolates. In this paper we present performance and convenience of three molecular typing methods: BOX-PCR, random amplification of polymorphic DNA (RAPD) and amplification of DNA fragments surrounding rare restriction site (ADSRRS-fingerprinting) in genome analysis of these bacteria. Among examined 61 strains there were distinguished four, eight and 10 different genotypes by BOX-PCR, RAPD and ADSRRS-fingerprinting, respectively. The value of discrimination index was the lowest for BOX-PCR (D = 0.265), much bigger for RAPD (D = 0.539) and the highest for ADSRRS-fingerprinting (D = 0.604). The good discriminatory ability and reproducibility of RAPD and ADSRRS-fingerprinting indicates that those techniques may be particularly applied for epidemiological studies of C. pseudotuberculosis isolates. We found that ADSRRS-fingerprinting is a rapid method offering good discrimination power, excellent reproducibility and may be applied for epidemiological studies of intraspecific genetic relatedness of C. pseudotuberculosis strains.

High Resolution Ultrasonic Method for 3D Fingerprint Recognizable Characteristics in Biometrics Identification

Science.gov (United States)

Maev, R. Gr.; Bakulin, E. Yu.; Maeva, A.; Severin, F.

Biometrics is a rapidly evolving scientific and applied discipline that studies possible ways of personal identification by means of unique biological characteristics. Such identification is important in various situations requiring restricted access to certain areas, information and personal data and for cases of medical emergencies. A number of automated biometric techniques have been developed, including fingerprint, hand shape, eye and facial recognition, thermographic imaging, etc. All these techniques differ in the recognizable parameters, usability, accuracy and cost. Among these, fingerprint recognition stands alone since a very large database of fingerprints has already been acquired. Also, fingerprints are key evidence left at a crime scene and can be used to indentify suspects. Therefore, of all automated biometric techniques, especially in the field of law enforcement, fingerprint identification seems to be the most promising. We introduce a newer development of the ultrasonic fingerprint imaging. The proposed method obtains a scan only once and then varies the C-scan gate position and width to visualize acoustic reflections from any appropriate depth inside the skin. Also, B-scans and A-scans can be recreated from any position using such data array, which gives the control over the visualization options. By setting the C-scan gate deeper inside the skin, distribution of the sweat pores (which are located along the ridges) can be easily visualized. This distribution should be unique for each individual so this provides a means of personal identification, which is not affected by any changes (accidental or intentional) of the fingers' surface conditions. This paper discusses different setups, acoustic parameters of the system, signal and image processing options and possible ways of 3-dimentional visualization that could be used as a recognizable characteristic in biometric identification.

Low rank alternating direction method of multipliers reconstruction for MR fingerprinting.

Science.gov (United States)

Assländer, Jakob; Cloos, Martijn A; Knoll, Florian; Sodickson, Daniel K; Hennig, Jürgen; Lattanzi, Riccardo

2018-01-01

The proposed reconstruction framework addresses the reconstruction accuracy, noise propagation and computation time for magnetic resonance fingerprinting. Based on a singular value decomposition of the signal evolution, magnetic resonance fingerprinting is formulated as a low rank (LR) inverse problem in which one image is reconstructed for each singular value under consideration. This LR approximation of the signal evolution reduces the computational burden by reducing the number of Fourier transformations. Also, the LR approximation improves the conditioning of the problem, which is further improved by extending the LR inverse problem to an augmented Lagrangian that is solved by the alternating direction method of multipliers. The root mean square error and the noise propagation are analyzed in simulations. For verification, in vivo examples are provided. The proposed LR alternating direction method of multipliers approach shows a reduced root mean square error compared to the original fingerprinting reconstruction, to a LR approximation alone and to an alternating direction method of multipliers approach without a LR approximation. Incorporating sensitivity encoding allows for further artifact reduction. The proposed reconstruction provides robust convergence, reduced computational burden and improved image quality compared to other magnetic resonance fingerprinting reconstruction approaches evaluated in this study. Magn Reson Med 79:83-96, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

Development of Quality Control Method for Glucofarmaka Antidiabetic Jamu by HPLC Fingerprint Analysis

Directory of Open Access Journals (Sweden)

Hanifullah Habibie

2017-04-01

Full Text Available Herbal medicines become increasingly popular all over the world for preventive and therapeutic purposes. Quality control of herbal medicines is important to make sure their safety and efficacy. Chromatographic fingerprinting has been accepted by the World Health Organization as one reliable strategy for quality control method in herbal medicines. In this study, high-performance liquid chromatography fingerprint analysis was developed as a quality control method for glucofarmaka antidiabetic jamu. The optimum fingerprint chromatogram were obtained using C18 as the stationary phase and linear gradient elution using 10–95% acetonitrile:water as the mobile phase within 60 minutes of elution and detection at 210 nm. About 20 peaks were detected and could be used as fingerprint of glucofarmaka jamu. To evaluate the analytical performance of the method, we determined the precision, reproducibility, and stability. The result of the analytical performance showed reliable results. The proposed method could be used as a quality control method for glucofarmaka antidiabetic jamu and also for its raw materials.

DECANTeR: DEteCtion of Anomalous outbouNd HTTP Traffic by Passive Application Fingerprinting

NARCIS (Netherlands)

Bortolameotti, R.; Ede, T. van; Caselli, M.; Everts, M.H.; Hartel, P.; Hofstede, R.; Jonker, W.; Peter, A.

2017-01-01

We present DECANTeR, a system to detect anomalous outbound HTTP communication, which passively extracts fingerprints for each application running on a monitored host. The goal of our system is to detect unknown malware and backdoor communication indicated by unknown fingerprints extracted from a

On multi-fingerprint detection and attribution of greenhouse gas- and aerosol forced climate change

Energy Technology Data Exchange (ETDEWEB)

Hegerl, G C [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Hasselmann, K [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Cubasch, U [Deutsches Klimarechenzentrum (DKRZ), Hamburg (Germany); Mitchell, J F.B. [Hadley Centre for Climate Prediction and Research, Bracknell (United Kingdom). Meteorological Office; Roeckner, E [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Voss, R [Deutsches Klimarechenzentrum (DKRZ), Hamburg (Germany); Waszkewitz, J [Deutsches Klimarechenzentrum (DKRZ), Hamburg (Germany)

1996-07-01

A multi-fingerprint analysis is applied to the detection and attribution of anthropogenic climate change. While a single fingerprint, as applied in a previous paper by Hegerl et al. (1996), is optimal for detecting a significant climate change, the simultaneous use of several fingerprints allows one to investigate additionally the consistency between observations and model predicted climate change signals for competing candidate forcing mechanisms. Thus the multi-fingerprint method is a particularly useful technique for attributing an observed climate change to a proposed cause. Different model-predicted climate change signals are derived from three global warming simulations for the period 1880 to 2049. In one simulation, the forcing was by greenhouse gases only, while in the remaining two simulations the influence of aerosols was also included. The two dominant climate change signals derived from these simulations are optimized statistically by weighting the model-predicted climate change pattern towards low-noise directions. These optimized fingerprints are then applied to observed near surface temperature trends. The space-time structure of natural climate variability (needed to determine the signal-to-noise ratio) is estimated from several multi-century control simulations with different CGCMs and from instrumental data over the last 134 years. (orig.)

An improved Hough transform-based fingerprint alignment approach

CSIR Research Space (South Africa)

Mlambo, CS

2014-11-01

Full Text Available An improved Hough Transform based fingerprint alignment approach is presented, which improves computing time and memory usage with accurate alignment parameter (rotation and translation) results. This is achieved by studying the strengths...

Genetic fingerprinting and phylogenetic diversity of Staphylococcus ...

African Journals Online (AJOL)

Genetic fingerprinting of 18 different isolates of Staphylococcus aureus from Nigeria using random amplified polymorphic DNA (RAPD) was carried out. Ten out of 100 Operon primers showed polymorphism among the isolates tested generating 88 bands, 51 of which were polymorphic with sizes ranging between 200 and ...

Atomistic fingerprint of hyaluronan-CD44 binding

DEFF Research Database (Denmark)

Vuorio, Joni; Vattulainen, Ilpo; Martinez-Seara, Hector

2017-01-01

that hyaluronan can bind CD44 with three topographically different binding modes that in unison define an interaction fingerprint, thus providing a plausible explanation for the disagreement between the earlier studies. Our results confirm that the known crystallographic mode is the strongest of the three binding...

Chromatographic fingerprint analysis of yohimbe bark and related dietary supplements using UHPLC/UV/MS.

Science.gov (United States)

Sun, Jianghao; Chen, Pei

2012-03-05

A practical ultra high-performance liquid chromatography (UHPLC) method was developed for fingerprint analysis of and determination of yohimbine in yohimbe barks and related dietary supplements. Good separation was achieved using a Waters Acquity BEH C(18) column with gradient elution using 0.1% (v/v) aqueous ammonium hydroxide and 0.1% ammonium hydroxide in methanol as the mobile phases. The study is the first reported chromatographic method that separates corynanthine from yohimbine in yohimbe bark extract. The chromatographic fingerprint analysis was applied to the analysis of 18 yohimbe commercial dietary supplement samples. Quantitation of yohimbine, the traditional method for analysis of yohimbe barks, were also performed to evaluate the results of the fingerprint analysis. Wide variability was observed in fingerprints and yohimbine content among yohimbe dietary supplement samples. For most of the dietary supplements, the yohimbine content was not consistent with the label claims. Copyright © 2011. Published by Elsevier B.V.

Analysis of gamma irradiated pepper constituents, 1

International Nuclear Information System (INIS)

Takagi, Kazuko; Okuyama, Tsuneo

1988-01-01

A reversed phase high performance liquid chromatographic (HPLC) method was developed for the analysis of many constituents of pepper at the same time. And a extraction method of ultraviolet absorbing constituents from pepper was developed for the HPLC analysis. The Ultraviolet absorbing constituents were extracted by precooled Automatic Air-Hammer from frozen pepper with 20% acetonitrile in water. The process of extraction was achieved under cooling by liquid nitrogen from start to end. The extracted constituents were separated on a reversed phase C 8 (LiChrospher 300 RP - 8 10 μm 0.4 I.D. x 0.4 cm and LiChrosorb RP - 8 SelectB 0.4 I. D. x 25 cm) column with a concave gradient from 0.1% trifluoro acetic acid (TFA) in water to 75% acetonitrile and 0.1% TFA in water for 60 minutes. The eluted constituents were detected 210 nm and 280 nm. The present method permits the detection of about 50 peaks by 280 nm. (author)

Indoor Localization Accuracy Estimation from Fingerprint Data

DEFF Research Database (Denmark)

Nikitin, Artyom; Laoudias, Christos; Chatzimilioudis, Georgios

2017-01-01

on arbitrary FMs coined ACCES. Our framework comprises a generic interpolation method using Gaussian Processes (GP), upon which a navigability score at any location is derived using the Cramer-Rao Lower Bound (CRLB). Our approach does not rely on the underlying physical model of the fingerprint data. Our...

Effect of Aging and Surface Interactions on the Diffusion of Endogenous Compounds in Latent Fingerprints Studied by Mass Spectrometry Imaging.

Science.gov (United States)

O'Neill, Kelly C; Lee, Young Jin

2018-05-01

The ability to determine the age of fingerprints would be immeasurably beneficial in criminal investigations. We explore the possibility of determining the age of fingerprints by analyzing various compounds as they diffuse from the ridges to the valleys of fingerprints using matrix-assisted laser desorption/ionization mass spectrometry imaging. The diffusion of two classes of endogenous fingerprint compounds, fatty acids and triacylglycerols (TGs), was studied in fresh and aged fingerprints on four surfaces. We expected higher molecular weight TGs would diffuse slower than fatty acids and allow us to determine the age of older fingerprints. However, we found interactions between endogenous compounds and the surface have a much stronger impact on diffusion than molecular weight. For example, diffusion of TGs is faster on hydrophilic plain glass or partially hydrophilic stainless steel surfaces, than on a hydrophobic Rain-x treated surface. This result further complicates utilizing a diffusion model to age fingerprints. © 2017 American Academy of Forensic Sciences.

Fingerprint detection and using intercalated CdSe nanoparticles on non-porous surfaces

Energy Technology Data Exchange (ETDEWEB)

Algarra, Manuel, E-mail: malgarra67@gmail.com [Centro de Geología da Universidade do Porto, Departamento de Geociências, Ambiente e Ordenamemto do Territorio do Porto, Faculdade de Ciências, Universidade do Porto, Rua do Campo Alegre 687, 4169-007 Porto (Portugal); Radotić, Ksenija; Kalauzi, Aleksandar; Mutavdžić, Dragosav; Savić, Aleksandar [Institute for Multidisciplinary Research, University of Belgrade, Kneza Višeslava 1, 11000 Beograd (Serbia); Jiménez-Jiménez, José; Rodríguez-Castellón, Enrique [Departamento de Química Inorgánica, Facultad de Ciencias, Universidad de Málaga, Campus de Teatinos s/n, 29071Málaga (Spain); Silva, Joaquim C.G. Esteves da [Centro de Investigação em Química (CIQ-UP). Faculdade de Ciências da Universidade do Porto, Rua do Campo Alegre 687, 4169-007 Porto (Portugal); Guerrero-González, Juan José [Policía Científica, Cuerpo Nacional de Policía, Málaga (Spain)

2014-02-17

Graphical abstract: -- Highlights: •Fluorescent nanocomposite based on the inclusion of CdSe quantum dots in porous phosphate heterostructures. •Characterized by FTIR, XRD and fluorescence spectroscopies. •Deconvolution of the emission spectra was confirmed by using multivariate curve resolution (MCR) method. •Application for fingerprint detection and analysis on different non-porous surfaces. -- Abstract: A fluorescent nanocomposite based on the inclusion of CdSe quantum dots in porous phosphate heterostructures, functionalized with amino groups (PPH-NH{sub 2}@CdSe), was synthesized, characterized and used for fingerprint detection. The main scopes of this work were first to develop a friendly chemical powder for detecting latent fingerprints, especially in non-porous surfaces; their further intercalation in PPH structure enables not to spread the fluorescent nanoparticles, for that reason very good fluorescent images can be obtained. The fingerprints, obtained on different non-porous surfaces such as iron tweezers, mobile telephone screen and magnetic band of a credit card, treated with this powder emit a pale orange luminescence under ultraviolet excitation. A further image processing consists of contrast enhancement that allows obtaining positive matches according to the information supplied from a police database, and showed to be more effective than that obtained with the non-processed images. Experimental results illustrate the effectiveness of proposed methods.

Fingerprint detection and using intercalated CdSe nanoparticles on non-porous surfaces

International Nuclear Information System (INIS)

Algarra, Manuel; Radotić, Ksenija; Kalauzi, Aleksandar; Mutavdžić, Dragosav; Savić, Aleksandar; Jiménez-Jiménez, José; Rodríguez-Castellón, Enrique; Silva, Joaquim C.G. Esteves da; Guerrero-González, Juan José

2014-01-01

Graphical abstract: -- Highlights: •Fluorescent nanocomposite based on the inclusion of CdSe quantum dots in porous phosphate heterostructures. •Characterized by FTIR, XRD and fluorescence spectroscopies. •Deconvolution of the emission spectra was confirmed by using multivariate curve resolution (MCR) method. •Application for fingerprint detection and analysis on different non-porous surfaces. -- Abstract: A fluorescent nanocomposite based on the inclusion of CdSe quantum dots in porous phosphate heterostructures, functionalized with amino groups (PPH-NH 2 @CdSe), was synthesized, characterized and used for fingerprint detection. The main scopes of this work were first to develop a friendly chemical powder for detecting latent fingerprints, especially in non-porous surfaces; their further intercalation in PPH structure enables not to spread the fluorescent nanoparticles, for that reason very good fluorescent images can be obtained. The fingerprints, obtained on different non-porous surfaces such as iron tweezers, mobile telephone screen and magnetic band of a credit card, treated with this powder emit a pale orange luminescence under ultraviolet excitation. A further image processing consists of contrast enhancement that allows obtaining positive matches according to the information supplied from a police database, and showed to be more effective than that obtained with the non-processed images. Experimental results illustrate the effectiveness of proposed methods

Authentication of commercial spices based on the similarities between gas chromatographic fingerprints.

Science.gov (United States)

Matsushita, Takaya; Zhao, Jing Jing; Igura, Noriyuki; Shimoda, Mitsuya

2018-06-01

A simple and solvent-free method was developed for the authentication of commercial spices. The similarities between gas chromatographic fingerprints were measured using similarity indices and multivariate data analyses, as morphological differentiation between dried powders and small spice particles was challenging. The volatile compounds present in 11 spices (i.e. allspice, anise, black pepper, caraway, clove, coriander, cumin, dill, fennel, star anise, and white pepper) were extracted by headspace solid-phase microextraction, and analysed by gas chromatography-mass spectrometry. The largest 10 peaks were selected from each total ion chromatogram, and a total of 65 volatiles were tentatively identified. The similarity indices (i.e. the congruence coefficients) were calculated using the data matrices of the identified compound relative peak areas to differentiate between two sets of fingerprints. Where pairs of similar fingerprints produced high congruence coefficients (>0.80), distinctive volatile markers were employed to distinguish between these samples. In addition, hierarchical cluster analysis and principal component analysis were performed to visualise the similarity among fingerprints, and the analysed spices were grouped and characterised according to their distinctive major components. This method is suitable for screening unknown spices, and can therefore be employed to evaluate the quality and authenticity of various spices. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

A design of irregular grid map for large-scale Wi-Fi LAN fingerprint positioning systems.

Science.gov (United States)

Kim, Jae-Hoon; Min, Kyoung Sik; Yeo, Woon-Young

2014-01-01

The rapid growth of mobile communication and the proliferation of smartphones have drawn significant attention to location-based services (LBSs). One of the most important factors in the vitalization of LBSs is the accurate position estimation of a mobile device. The Wi-Fi positioning system (WPS) is a new positioning method that measures received signal strength indication (RSSI) data from all Wi-Fi access points (APs) and stores them in a large database as a form of radio fingerprint map. Because of the millions of APs in urban areas, radio fingerprints are seriously contaminated and confused. Moreover, the algorithmic advances for positioning face computational limitation. Therefore, we present a novel irregular grid structure and data analytics for efficient fingerprint map management. The usefulness of the proposed methodology is presented using the actual radio fingerprint measurements taken throughout Seoul, Korea.

A Design of Irregular Grid Map for Large-Scale Wi-Fi LAN Fingerprint Positioning Systems

Directory of Open Access Journals (Sweden)

Jae-Hoon Kim

2014-01-01

Full Text Available The rapid growth of mobile communication and the proliferation of smartphones have drawn significant attention to location-based services (LBSs. One of the most important factors in the vitalization of LBSs is the accurate position estimation of a mobile device. The Wi-Fi positioning system (WPS is a new positioning method that measures received signal strength indication (RSSI data from all Wi-Fi access points (APs and stores them in a large database as a form of radio fingerprint map. Because of the millions of APs in urban areas, radio fingerprints are seriously contaminated and confused. Moreover, the algorithmic advances for positioning face computational limitation. Therefore, we present a novel irregular grid structure and data analytics for efficient fingerprint map management. The usefulness of the proposed methodology is presented using the actual radio fingerprint measurements taken throughout Seoul, Korea.

Compatibility of DNA IQ™, QIAamp® DNA Investigator, and QIAsymphony® DNA Investigator® with various fingerprint treatments.

Science.gov (United States)

Lin, Sze-Wah; Ip, Stephen C Y; Lam, Tze-Tsun; Tan, Tung-Fai; Yeung, Wai-Lung; Tam, Wai-Ming

2017-03-01

Latent fingerprint and touch DNA are the two most important contact evidence for individualization in forensic science which provide complementary information that can lead to direct and unequivocal identification of the culprit. In order to retrieve useful information from both fingerprints and DNA, which are usually mingled together, one strategy is to perform fingerprint examination prior to DNA analysis since common DNA sampling technique such as swabbing could disturb or even destroy fingerprint details. Here, we describe the compatibility of three automatic DNA extraction systems, namely, DNA IQ™, QIAamp ® DNA Investigator, and QIAsymphony ® DNA Investigator ® , with respective to the effects of various fingerprint detection techniques. Our results demonstrate that Super Glue fingerprint treatment followed by DNA IQ™ extraction shows better effectiveness in DNA profiling. Aluminum powder dusting offers the least interference to the three DNA extraction systems above. Magnetic powder dusting, on the other hand, strongly impedes DNA recovery. Physical Developer is the most intrusive, which yields profiles with poor quality, including lower peak heights, poor peak height ratios, and poor intra-color balance. In terms of the choice of extraction method, DNA IQ™ system is recommended for sampling after fingerprint treatments, but not the two DNA Investigator systems.

CHEMICAL INVESTIGATION OF THE VOLATILE CONSTITUENTS ...

African Journals Online (AJOL)

CHEMICAL INVESTIGATION OF THE VOLATILE CONSTITUENTS OF CLEOME VISCOSA FROM NIGERIA. Gabriel Olatunji, Peter Weyerstahl, Stephen Oguntoye. Abstract. The major volatile constituents of the oils from the integral parts of Cleome viscosa L. from Nigeria have been identified by GC, GC/MS and 1H NMR.

Sphagnum moss as a growing media constituent: some effects of harvesting, processing and storage

Directory of Open Access Journals (Sweden)

S. Kumar

2017-09-01

Full Text Available The Sphagnum material used in horticulture so far has been harvested manually, and most of the available data about Sphagnum properties have been obtained from this material. A question that remains unanswered is how changes during harvesting and processing, as well as the use of mechanical methods, affect the important properties of Sphagnum moss as a growing media constituent. Some of the effects have been evaluated in Sphagnum farming projects in Germany during the past ten years, and are described in this article. Different possibilities for drying, screening and cleaning the Sphagnum material are described. The results obtained indicate that Sphagnum moss can be dried and processed using mechanical methods without negative impacts on its quality as a growing media constituent.

Pseudo Steady-State Free Precession for MR-Fingerprinting.

Science.gov (United States)

Assländer, Jakob; Glaser, Steffen J; Hennig, Jürgen

2017-03-01

This article discusses the signal behavior in the case the flip angle in steady-state free precession sequences is continuously varied as suggested for MR-fingerprinting sequences. Flip angle variations prevent the establishment of a steady state and introduce instabilities regarding to magnetic field inhomogeneities and intravoxel dephasing. We show how a pseudo steady state can be achieved, which restores the spin echo nature of steady-state free precession. Based on geometrical considerations, relationships between the flip angle, repetition and echo time are derived that suffice to the establishment of a pseudo steady state. The theory is tested with Bloch simulations as well as phantom and in vivo experiments. A typical steady-state free precession passband can be restored with the proposed conditions. The stability of the pseudo steady state is demonstrated by comparing the evolution of the signal of a single isochromat to one resulting from a spin ensemble. As confirmed by experiments, magnetization in a pseudo steady state can be described with fewer degrees of freedom compared to the original fingerprinting and the pseudo steady state results in more reliable parameter maps. The proposed conditions restore the spin-echo-like signal behavior typical for steady-state free precession in fingerprinting sequences, making this approach more robust to B 0 variations. Magn Reson Med 77:1151-1161, 2017. © 2016 International Society for Magnetic Resonance in Medicine. © 2016 International Society for Magnetic Resonance in Medicine.

Composite fingerprinting of suspended-sediments in Sorsogon , Philippines

International Nuclear Information System (INIS)

Ramirez, J.D.; Sta Maria, E.J.; Madrid, J.F.; Asa, A.D.D.; Aniago, R.J.; Bulos, A.D.; Zombrito, E.Z.

2015-01-01

Sediment-related environmental problems pose a threat not only in land management sustainability but also in management of aquatic ecosystem. Sediments often serve as sinks of nutrients and contaminants that regularly recharge overlying waters and could trigger harmful algal blooms (HAB) together with unfavorable environment conditions. One HAB affected area in the southernmost tip of Luzon, Philippines is Sorsogon Bay. In Sorsogon Bay, the harvest and consumption ban was declared for several years due to the level of toxins in shellfish which exceeded the regulatory limit. Identification of sediment sources is useful tool in planning effective sediment management strategies. A method to determine possible sources of sediment-associated nutrients is sediment fingerprinting. It characterizes land-based sediment sources to derive estimates of the portions of suspended sediment originating from discrete upstream source areas. There are wide ranges of diagnostic properties which can be possible fingerprints such as mineralogic, mineral-magnetic, geochemical, organic, isotopic, physical and radiometric parameters. This study investigates on potential source of sediments from Sampaloc River using different chemical, radiometric and isotopic parameters, Range test and Kruskal-Wallis H-test were employed and indicated that the calcium, titanium, δ”1”3C signal, and to tal carbon content are possible fingerprint parameters that will identify the sources of sediments. Results of a mathematical mixing model showed that channel banks (81.0%) are the largest sediment load contributors in Sampaloc River, followed by cultivated areas (15.5%) and woodlands (3.5%). (author)

Distinction of water-soluble constituents between natural and cultured Cordyceps by capillary electrophoresis.

Science.gov (United States)

Li, S P; Song, Z H; Dong, T T X; Ji, Z N; Lo, C K; Zhu, S Q; Tsim, K W K

2004-11-01

Cordyceps is an expensive traditional Chinese medicine, which has anti-tumor activity and significant effects on the immune system. In Southeast Asia, Cordyceps is commonly sold in capsule form as a health food product. Most of these products are derived from cultured Cordyceps mycelia. Because of the price difference, some manufacturers claim their products are from natural Cordyceps. In order to distinguish among various types of Cordyceps in the market, the profiles of water-soluble constituents derived from different sources of Cordyceps were determined by capillary electrophoresis (CE). Both natural and cultured Cordyceps showed three peak clusters migrated at 5-7, 9-11 and 12-13 min, and the height and resolution of these peak clusters were rather distinct. Peak cluster at 9-11 min was identified as adenosine, guanosine and uridine, and shared a similarity between natural and cultured products. In contrast, the peak cluster at 5-7 min was characteristic of natural Cordyceps, regardless of hosts and sources. By using the peak characteristics of CE profiles of different Cordyceps samples, hierarchical clustering analysis was performed. The result shows that those samples of natural Cordyceps were grouped together distinct from the cultured and commercial products. Thus, the CE profiles could serve as fingerprints for the quality control of Cordyceps.

Characterization of human glioblastoma cell lines in vitro and their xenografts in nude mice by DNA fingerprinting

DEFF Research Database (Denmark)

Türeci, O; Fischer, H; Lagoda, P

1990-01-01

Human gliomas were grown as permanent tissue cultures and xenografts in nude mice. DNA fingerprint patterns from two human gliomas were established using two different hypervariable multilocus probes [( GTG]5 and 33.15). In general the cell lines investigated showed an overall stability in the DNA...... fingerprint pattern. However, differences in the DNA fingerprint patterns were shown to occur depending upon the above mentioned parameters....

Comparative study of five different DNA fingerprint techniques for molecular typing of Streptococcus pneumoniae strains

NARCIS (Netherlands)

P.W.M. Hermans (Peter); M. Sluijter (Marcel); T. Hoogenboezem (Theo); H. Heersma; A.F. van Belkum (Alex); R. de Groot (Ronald)

1995-01-01

textabstractThe aim of this study was to identify the strengths and weaknesses of five DNA fingerprint methods for epidemiological typing of Streptococcus pneumoniae. We investigated the usefulness of (i) ribotyping, (ii) BOX fingerprinting with the BOX repetitive sequence of S.

A novel patterning control strategy based on real-time fingerprint recognition and adaptive wafer level scanner optimization

Science.gov (United States)

Cekli, Hakki Ergun; Nije, Jelle; Ypma, Alexander; Bastani, Vahid; Sonntag, Dag; Niesing, Henk; Zhang, Linmiao; Ullah, Zakir; Subramony, Venky; Somasundaram, Ravin; Susanto, William; Matsunobu, Masazumi; Johnson, Jeff; Tabery, Cyrus; Lin, Chenxi; Zou, Yi

2018-03-01

In addition to lithography process and equipment induced variations, processes like etching, annealing, film deposition and planarization exhibit variations, each having their own intrinsic characteristics and leaving an effect, a `fingerprint', on the wafers. With ever tighter requirements for CD and overlay, controlling these process induced variations is both increasingly important and increasingly challenging in advanced integrated circuit (IC) manufacturing. For example, the on-product overlay (OPO) requirement for future nodes is approaching process induced variance to become extremely small. Process variance control is seen as an bottleneck to further shrink which drives the need for more sophisticated process control strategies. In this context we developed a novel `computational process control strategy' which provides the capability of proactive control of each individual wafer with aim to maximize the yield, without introducing a significant impact on metrology requirements, cycle time or productivity. The complexity of the wafer process is approached by characterizing the full wafer stack building a fingerprint library containing key patterning performance parameters like Overlay, Focus, etc. Historical wafer metrology is decomposed into dominant fingerprints using Principal Component Analysis. By associating observed fingerprints with their origin e.g. process steps, tools and variables, we can give an inline assessment of the strength and origin of the fingerprints on every wafer. Once the fingerprint library is established, a wafer specific fingerprint correction recipes can be determined based on its processing history. Data science techniques are used in real-time to ensure that the library is adaptive. To realize this concept, ASML TWINSCAN scanners play a vital role with their on-board full wafer detection and exposure correction capabilities. High density metrology data is created by the scanner for each wafer and on every layer during the

Bayesian screening for active compounds in high-dimensional chemical spaces combining property descriptors and molecular fingerprints.

Science.gov (United States)

Vogt, Martin; Bajorath, Jürgen

2008-01-01

Bayesian classifiers are increasingly being used to distinguish active from inactive compounds and search large databases for novel active molecules. We introduce an approach to directly combine the contributions of property descriptors and molecular fingerprints in the search for active compounds that is based on a Bayesian framework. Conventionally, property descriptors and fingerprints are used as alternative features for virtual screening methods. Following the approach introduced here, probability distributions of descriptor values and fingerprint bit settings are calculated for active and database molecules and the divergence between the resulting combined distributions is determined as a measure of biological activity. In test calculations on a large number of compound activity classes, this methodology was found to consistently perform better than similarity searching using fingerprints and multiple reference compounds or Bayesian screening calculations using probability distributions calculated only from property descriptors. These findings demonstrate that there is considerable synergy between different types of property descriptors and fingerprints in recognizing diverse structure-activity relationships, at least in the context of Bayesian modeling.

DNA fingerprinting of glioma cell lines and considerations on similarity measurements.

Science.gov (United States)

Bady, Pierre; Diserens, Annie-Claire; Castella, Vincent; Kalt, Stefanie; Heinimann, Karl; Hamou, Marie-France; Delorenzi, Mauro; Hegi, Monika E

2012-06-01

Glioma cell lines are an important tool for research in basic and translational neuro-oncology. Documentation of their genetic identity has become a requirement for scientific journals and grant applications to exclude cross-contamination and misidentification that lead to misinterpretation of results. Here, we report the standard 16 marker short tandem repeat (STR) DNA fingerprints for a panel of 39 widely used glioma cell lines as reference. Comparison of the fingerprints among themselves and with the large DSMZ database comprising 9 marker STRs for 2278 cell lines uncovered 3 misidentified cell lines and confirmed previously known cross-contaminations. Furthermore, 2 glioma cell lines exhibited identity scores of 0.8, which is proposed as the cutoff for detecting cross-contamination. Additional characteristics, comprising lack of a B-raf mutation in one line and a similarity score of 1 with the original tumor tissue in the other, excluded a cross-contamination. Subsequent simulation procedures suggested that, when using DNA fingerprints comprising only 9 STR markers, the commonly used similarity score of 0.8 is not sufficiently stringent to unambiguously differentiate the origin. DNA fingerprints are confounded by frequent genetic alterations in cancer cell lines, particularly loss of heterozygosity, that reduce the informativeness of STR markers and, thereby, the overall power for distinction. The similarity score depends on the number of markers measured; thus, more markers or additional cell line characteristics, such as information on specific mutations, may be necessary to clarify the origin.

Rapid genomic fingerprinting of Lactococcus lactis strains by arbitrarily primed polymerase chain reaction with 32P and fluorescent labels.

OpenAIRE

Cancilla, M R; Powell, I B; Hillier, A J; Davidson, B E

1992-01-01

Arbitrarily primed polymerase chain reaction, with incorporation of either radioactive or fluorescent labels, was used as a rapid and sensitive method for obtaining genomic fingerprints of strains of Lactococcus lactis. Closely related strains produced almost identical fingerprints. Fingerprints of other strains showed only some similarities.

Use of nitrogen cryogun for separating duct tape and recovery of latent fingerprints with a powder suspension method.

Science.gov (United States)

Bailey, James A; Crane, Jonathan Stuart

2011-07-15

Duct tape is sometimes recovered as physical evidence in crimes. The purpose of this study was to determine the quality of latent prints on the adhesive and non-adhesive surfaces of duct tape samples that were separated using three methods. Three hundred donor fingerprint impressions were deposited on duct tape. Sections of duct tape were affixed to sections of cardboard and a fingerprint placed on the non-adhesive surface of the tape. A second layer of duct tape was prepared and a fingerprint placed on the adhesive side of the tape and then the tape was affixed to the piece of tape on the cardboard. After a 24-h period, the samples were separated using gradual force, liquid nitrogen applied with a cryogun and an adhesive neutralizer to separate the layers of tape. The recovered fingerprints were processed with a fingerprint powder suspension method. The recovered fingerprint images were evaluated and rated as +1, +2, or +3. The liquid nitrogen spray separation method yielded the highest number of +3 prints. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Generation of sequence signatures from DNA amplification fingerprints with mini-hairpin and microsatellite primers.

Science.gov (United States)

Caetano-Anollés, G; Gresshoff, P M

1996-06-01

DNA amplification fingerprinting (DAF) with mini-hairpins harboring arbitrary "core" sequences at their 3' termini were used to fingerprint a variety of templates, including PCR products and whole genomes, to establish genetic relationships between plant tax at the interspecific and intraspecific level, and to identify closely related fungal isolates and plant accessions. No correlation was observed between the sequence of the arbitrary core, the stability of the mini-hairpin structure and DAF efficiency. Mini-hairpin primers with short arbitrary cores and primers complementary to simple sequence repeats present in microsatellites were also used to generate arbitrary signatures from amplification profiles (ASAP). The ASAP strategy is a dual-step amplification procedure that uses at least one primer in each fingerprinting stage. ASAP was able to reproducibly amplify DAF products (representing about 10-15 kb of sequence) following careful optimization of amplification parameters such as primer and template concentration. Avoidance of primer sequences partially complementary to DAF product termini was necessary in order to produce distinct fingerprints. This allowed the combinatorial use of oligomers in nucleic acid screening, with numerous ASAP fingerprinting reactions based on a limited number of primer sequences. Mini-hairpin primers and ASAP analysis significantly increased detection of polymorphic DNA, separating closely related bermudagrass (Cynodon) cultivars and detecting putatively linked markers in bulked segregant analysis of the soybean (Glycine max) supernodulation (nitrate-tolerant symbiosis) locus.

Quantifying Differences and Similarities in Whole-Brain White Matter Architecture Using Local Connectome Fingerprints.

Directory of Open Access Journals (Sweden)

Fang-Cheng Yeh

2016-11-01

Full Text Available Quantifying differences or similarities in connectomes has been a challenge due to the immense complexity of global brain networks. Here we introduce a noninvasive method that uses diffusion MRI to characterize whole-brain white matter architecture as a single local connectome fingerprint that allows for a direct comparison between structural connectomes. In four independently acquired data sets with repeated scans (total N = 213, we show that the local connectome fingerprint is highly specific to an individual, allowing for an accurate self-versus-others classification that achieved 100% accuracy across 17,398 identification tests. The estimated classification error was approximately one thousand times smaller than fingerprints derived from diffusivity-based measures or region-to-region connectivity patterns for repeat scans acquired within 3 months. The local connectome fingerprint also revealed neuroplasticity within an individual reflected as a decreasing trend in self-similarity across time, whereas this change was not observed in the diffusivity measures. Moreover, the local connectome fingerprint can be used as a phenotypic marker, revealing 12.51% similarity between monozygotic twins, 5.14% between dizygotic twins, and 4.51% between none-twin siblings, relative to differences between unrelated subjects. This novel approach opens a new door for probing the influence of pathological, genetic, social, or environmental factors on the unique configuration of the human connectome.

Total organic carbon, an important tool in an holistic approach to hydrocarbon source fingerprinting

Energy Technology Data Exchange (ETDEWEB)

Boehm, P.D.; Burns, W.A.; Page, D.S.; Bence, A.E.; Mankiewicz, P.J.; Brown, J.S.; Douglas, G.S. [Battelle Member Inst., Waltham, MA (United States)

2002-07-01

The identification and allocation of multiple hydrocarbon sources in marine sediments is best achieved using an holistic approach. Total organic carbon (TOC) is one important tool that can constrain the contributions of specific sources and rule out incorrect source allocations in cases where inputs are dominated by fossil organic carbon. In a study of the benthic sediments from Prince William Sound (PWS) and the Gulf of Alaska (GOA), we find excellent agreement between measured TOC and TOC calculated from hydrocarbon fingerprint matches of polycyclic aromatic hydrocarbons (PAH) and chemical biomarkers. Confirmation by two such independent source indicators (TOC and fingerprint matches) provides evidence that source allocations determined by the fingerprint matches are robust and that the major TOC sources have been correctly identified. Fingerprint matches quantify the hydrocarbon contributions of various sources to the benthic sediments and the degree of hydrocarbon winnowing by waves and currents. TOC contents are then calculated using source allocation results from fingerprint matches and the TOCs of contributing sources. Comparisons of the actual sediment TOC values and those calculated from source allocation support our earlier published findings that the natural petrogenic hydrocarbon background in sediments in this area comes from eroding Tertiary shales and associated oil seeps along the northern GOA coast and exclude thermally mature area coals from being important contributors to the PWS background due to their high TOC content.

Sediment fingerprinting in agricultural catchments: A critical re-examination of source discrimination and data corrections

Science.gov (United States)

Smith, Hugh G.; Blake, William H.

2014-01-01

Fine sediment source fingerprinting techniques have been widely applied in agricultural river catchments. Successful source discrimination in agricultural environments depends on the key assumption that land-use source signatures imprinted on catchment soils are decipherable from those due to other landscape factors affecting soil and sediment properties. In this study, we re-examine this critical assumption by investigating (i) the physical and chemical basis for source discrimination and (ii) potential factors that may confound source un-mixing in agricultural catchments, including particle size and organic matter effects on tracer properties. The study is situated in the River Tamar, a predominantly agricultural catchment (920 km2) in south-west England that has also been affected by mining. Source discrimination focused on pasture and cultivated land uses and channel banks. Monthly, time-integrated suspended sediment samples were collected across seven catchments for a 12-month period. Physical and chemical properties measured in source soils and sediment included fallout radionuclides (137Cs, excess 210Pb), major and minor element geochemical constituents, total organic carbon and particle size. Source discrimination was entirely dependent on differences in tracer property concentrations between surface and sub-surface soils. This is based on fallout radionuclide concentrations that are surface-elevated, while many geochemical properties are surface-depleted due to weathering and pedogenetic effects, although surface soil contamination can reverse this trend. However, source discrimination in the study catchments was limited by (i) rotation of cultivated and pasture fields resulting in reduced differences between these two sources, and (ii) the cultivated source signature resembling a mix of the pasture and channel bank sources for many tracer properties. Furthermore, a combination of metal pollution from abandoned historic mines and organic enrichment of

Optimization of simultaneous ultrasonic-assisted extraction of water-soluble and fat-soluble characteristic constituents from Forsythiae Fructus Using response surface methodology and high-performance liquid chromatography.

Science.gov (United States)

Xia, Yong-Gang; Yang, Bing-You; Liang, Jun; Wang, Di; Yang, Qi; Kuang, Hai-Xue

2014-07-01

The compounds (+)-pinoresinol-β-glucoside (1) forsythiaside, (2) phillyrin (3) and phillygenin (4) were elucidated to be the characteristic constituents for quality control of Forsythiae Fructus extract by chromatographic fingerprint in 2010 edition of Chinese Pharmacopoeia due to their numerous important pharmacological actions. It is of great interest to extract these medicinally active constituents from Forsythiae Fructus simultaneously. In this study, a new ultrasound-assisted extraction (UAE) method was developed for the simultaneous extraction of biological components 1-4 in Forsythiae Fructus. The quantitative effects of extraction time, ratio of liquid to solid, extraction temperature, and methanol concentration on yield of these four important biological constituents from Forsythiae Fructus were investigated using response surface methodology with Box-Behnken design. The compounds 1-4 extracted by UAE were quantitative analysis by high-performance liquid chromatography-photodiode array detect (HPLC-PAD), and overall desirability (OD), the geometric mean of the contents of four major biological components, was used as a marker to evaluate the extraction efficiency. By solving the regression equation and analyzing 3-D plots, the optimum condition was at extraction temperature 70°C, time 60 min, ratio of liquid to solid 20, and methanol concentration 76.6%. Under these conditions, extraction yields of compounds 1-4 were 2.92 mg/g, 52.10 mg/g, 0.90 mg/g and 0.57 mg/g, respectively, which were in good agreement with the predicted OD values. In order to achieve a similar yield as UAE, soxhlet extraction required at least 6 h and maceration extraction required much longer time of 24 h. Established UAE method has been successfully applied to sample preparation for the quality control of Forsythiae Fructus. Additionally, a quadrupole time-of-flight mass spectrometry was applied to the structural confirmation of analytes from the complex matrices acquired by UAE

Similarity score computation for minutiae-based fingerprint recognition