WorldWideScience

Sample records for project creator tool

  1. The Creative task Creator: a tool for the generation of customized, Web-based creativity tasks.

    Science.gov (United States)

    Pretz, Jean E; Link, John A

    2008-11-01

    This article presents a Web-based tool for the creation of divergent-thinking and open-ended creativity tasks. A Java program generates HTML forms with PHP scripting that run an Alternate Uses Task and/or open-ended response items. Researchers may specify their own instructions, objects, and time limits, or use default settings. Participants can also be prompted to select their best responses to the Alternate Uses Task (Silvia et al., 2008). Minimal programming knowledge is required. The program runs on any server, and responses are recorded in a standard MySQL database. Responses can be scored using the consensual assessment technique (Amabile, 1996) or Torrance's (1998) traditional scoring method. Adoption of this Web-based tool should facilitate creativity research across cultures and access to eminent creators. The Creative Task Creator may be downloaded from the Psychonomic Society's Archive of Norms, Stimuli, and Data, www.psychonomic.org/archive.

  2. A novel tool to predict food intake: the Visual Meal Creator.

    Science.gov (United States)

    Holliday, Adrian; Batey, Chris; Eves, Frank F; Blannin, Andrew K

    2014-08-01

    Subjective appetite is commonly measured using an abstract visual analogue scale (VAS) technique, that provides no direct information about desired portion size or food choice. The purpose of this investigation was to develop and validate a user-friendly tool - the Visual Meal Creator (VIMEC) - that would allow for independent, repeated measures of subjective appetite and provide a prediction of food intake. Twelve participants experienced dietary control over a 5-hour period to manipulate hunger state on three occasions (small breakfast (SB) vs. large breakfast (LB) vs. large breakfast + snacks (LB+S)). Appetite measures were obtained every 60 minutes using the VIMEC and VAS. At 4.5 hours, participants were presented with an ad libitum test meal, from which energy intake (EI) was measured. The efficacy of the VIMEC was assessed by its ability to detect expected patterns of appetite and its strength as a predictor of energy intake. Day-to-day reproducibility and test-retest repeatability were assessed. Between- and within-condition differences in VAS and VIMEC scores (represented as mm and kcal of the "created" meal, respectively) were significantly correlated with one another throughout. Between- and within-condition changes in appetite scores obtained with the VIMEC exhibited a stronger correlation with EI at the test meal than those obtained with VAS. Pearson correlation coefficients for within-condition comparisons were 0.951, 0.914 and 0.875 (all p < 0.001) for SB, LB and LB+S respectively. Correlation coefficients for between-condition differences in VIMEC and EI were 0.273, 0.940 (p < 0.001) and 0.525 (p < 0.05) for SB - LB+S, SB - LB and LB - LB+S respectively. The VIMEC exhibited a similar degree of reproducibility to VAS. These findings suggest that the VIMEC appears to be a stronger predictor of energy intake than VAS. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. Creators Room

    DEFF Research Database (Denmark)

    Iversholt, Lene; Iversholt Toft, Karina

    2012-01-01

    Creators Room er et koncept til daginsitutioner, der indrammer og giver bud på en forståelse mellem inkluderende pædagogik og fysiske rammer. Konceptet er udviklet i et tværfagligt procesforløb, hvor formålet har været at skabe stadig bedre indendørsmiljøer for børn ved at forene pædagogiske...

  4. Tools and Workflows for Collaborating on Static Website Projects

    Directory of Open Access Journals (Sweden)

    Kaitlin Newson

    2017-10-01

    Full Text Available Static website generators have seen a significant increase in popularity in recent years, offering many advantages over their dynamic counterparts. While these generators were typically used for blogs, they have grown in usage for other web-based projects, including documentation, conference websites, and image collections. However, because of their technical complexity, these tools can be inaccessible to content creators depending on their level of technical skill and comfort with web development technologies. Drawing from experience with a collaborative static website project, this article will provide an overview of static website generators, review different tools available for managing content, and explore workflows and best practices for collaborating with teams on static website projects.

  5. Transformational Tools and Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Transformational Tools and Technologies (TTT) Project advances state-of-the-art computational and experimental tools and technologies that are vital to aviation...

  6. Application development with Qt creator

    CERN Document Server

    Rischpater, Ray

    2014-01-01

    This book is great for developers who are new to Qt and Qt Creator and who are interested in harnessing the power of Qt for cross-platform development. If you have basic experience programming in C++, you have what it takes to create engaging cross-platform applications using Qt and Qt Creator!

  7. Enhanced project management tool

    Science.gov (United States)

    Hsu, Chen-Jung (Inventor); Patel, Hemil N. (Inventor); Maluf, David A. (Inventor); Moh Hashim, Jairon C. (Inventor); Tran, Khai Peter B. (Inventor)

    2012-01-01

    A system for managing a project that includes multiple tasks and a plurality of workers. Input information includes characterizations based upon a human model, a team model and a product model. Periodic reports, such as one or more of a monthly report, a task plan report, a schedule report, a budget report and a risk management report, are generated and made available for display or further analysis or collection into a customized report template. An extensible database allows searching for information based upon context and upon content. Seven different types of project risks are addressed, including non-availability of required skill mix of workers. The system can be configured to exchange data and results with corresponding portions of similar project analyses, and to provide user-specific access to specified information.

  8. Project management tool

    Science.gov (United States)

    Maluf, David A. (Inventor); Bell, David G. (Inventor); Gurram, Mohana M. (Inventor); Gawdiak, Yuri O. (Inventor)

    2009-01-01

    A system for managing a project that includes multiple tasks and a plurality of workers. Input information includes characterizations based upon a human model, a team model and a product model. Periodic reports, such as a monthly report, a task plan report, a budget report and a risk management report, are generated and made available for display or further analysis. An extensible database allows searching for information based upon context and upon content.

  9. Studerende som co-creators

    DEFF Research Database (Denmark)

    Andersen, Line Palle

    En kogebog blev udviklet med studerende som co-creators på 3 moduler om innovation, skriftlig kommunikation og praktik med redigering. Healeys model om student-partnerships blev anvendt som fundament......En kogebog blev udviklet med studerende som co-creators på 3 moduler om innovation, skriftlig kommunikation og praktik med redigering. Healeys model om student-partnerships blev anvendt som fundament...

  10. Application development with Qt creator

    CERN Document Server

    Rischpater, Ray

    2013-01-01

    Written in a concise and easy-to-follow approach, this book will guide you to develop your first application with Qt with illustrated examples and screenshots.If you are a developer who is new to Qt and Qt Creator and is interested in harnessing the power of Qt for cross-platform development, this book is great for you. If you have basic experience programming in C++, you have what it takes to create great cross-platform applications using Qt and Qt Creator!

  11. Software Tools Streamline Project Management

    Science.gov (United States)

    2009-01-01

    Three innovative software inventions from Ames Research Center (NETMARK, Program Management Tool, and Query-Based Document Management) are finding their way into NASA missions as well as industry applications. The first, NETMARK, is a program that enables integrated searching of data stored in a variety of databases and documents, meaning that users no longer have to look in several places for related information. NETMARK allows users to search and query information across all of these sources in one step. This cross-cutting capability in information analysis has exponentially reduced the amount of time needed to mine data from days or weeks to mere seconds. NETMARK has been used widely throughout NASA, enabling this automatic integration of information across many documents and databases. NASA projects that use NETMARK include the internal reporting system and project performance dashboard, Erasmus, NASA s enterprise management tool, which enhances organizational collaboration and information sharing through document routing and review; the Integrated Financial Management Program; International Space Station Knowledge Management; Mishap and Anomaly Information Reporting System; and management of the Mars Exploration Rovers. Approximately $1 billion worth of NASA s projects are currently managed using Program Management Tool (PMT), which is based on NETMARK. PMT is a comprehensive, Web-enabled application tool used to assist program and project managers within NASA enterprises in monitoring, disseminating, and tracking the progress of program and project milestones and other relevant resources. The PMT consists of an integrated knowledge repository built upon advanced enterprise-wide database integration techniques and the latest Web-enabled technologies. The current system is in a pilot operational mode allowing users to automatically manage, track, define, update, and view customizable milestone objectives and goals. The third software invention, Query

  12. Ace Project as a Project Management Tool

    Science.gov (United States)

    Cline, Melinda; Guynes, Carl S.; Simard, Karine

    2010-01-01

    The primary challenge of project management is to achieve the project goals and objectives while adhering to project constraints--usually scope, quality, time and budget. The secondary challenge is to optimize the allocation and integration of resources necessary to meet pre-defined objectives. Project management software provides an active…

  13. Homo creator: facet of creativity

    Directory of Open Access Journals (Sweden)

    V. S. Grekova

    2014-09-01

    Full Text Available The paper aims to highlight the essence of the concepts of «creativity» and «creative person». We give a definition of «Homo creator», which is treated as a creative person. For definition of creativity as a term analyzes existing in modern and ancient philosophical literature interpretation. «Homo creator» is analyzed as a person free from fears and experiences, some of the faces and boundaries that limit a person; active, open, proactive and creative person can create something new and unknown; constantly provides further restructuring of nature, creates a new objective environment in which developing human civilization and nature. Outlined the phenomenon of creativity as a complex complex phenomenon. It is proved that creativity is a social and cultural phenomenon that is focused basically on something new and expressing the present culture. Creativity - a special quality of that belongs to man as a social being and promotes change and development in all spheres of public life and undoubtedly overcomes various crisis conditions and situations that pose basic questions of human existence and the meaning of its relationships with the outside world . The phenomenon of creativity as an option to overcome the existential crisis of identity. The problem of studying the influence of modern art to overcome the «boundary» conditions of human life and further reflection on existential experiences of her creative life position is relevant to the subject of scientific research.

  14. Quality Assurance Project Plan Development Tool

    Science.gov (United States)

    This tool contains information designed to assist in developing a Quality Assurance (QA) Project Plan that meets EPA requirements for projects that involve surface or groundwater monitoring and/or the collection and analysis of water samples.

  15. Tools for Supporting Distributed Agile Project Planning

    Science.gov (United States)

    Wang, Xin; Maurer, Frank; Morgan, Robert; Oliveira, Josyleuda

    Agile project planning plays an important part in agile software development. In distributed settings, project planning is severely impacted by the lack of face-to-face communication and the inability to share paper index cards amongst all meeting participants. To address these issues, several distributed agile planning tools were developed. The tools vary in features, functions and running platforms. In this chapter, we first summarize the requirements for distributed agile planning. Then we give an overview on existing agile planning tools. We also evaluate existing tools based on tool requirements. Finally, we present some practical advices for both designers and users of distributed agile planning tools.

  16. Homestead creator: a tool for indigenous designers

    DEFF Research Database (Denmark)

    Rodil, Kasper; Winschiers-Theophilus, Heike; Jensen, Kasper L

    2012-01-01

    The article presents in-situ findings of introducing a tablet prototype, with touch interaction and 3D graphical visualizations, to empower knowledgeable village elders in Namibia to locally re-create a 3D graphical context for previously recorded video clips of indigenous practices and narratives...

  17. Clothing creator trademark : Business plan

    Energy Technology Data Exchange (ETDEWEB)

    Stern, B.

    1990-10-01

    SYMAGERY has developed a patented process to manufacture clothing without direct human labor. This CLOTHING CREATOR{trademark}, will have the ability to produce two (2) perfect garments every 45 seconds or one (1) every 30 seconds. The process will combine Computer Integrated Manufacturing (CIM) technology with heat molding and ultrasonic bonding/cutting techniques. This system for garment production, will have the capacity to produce garments of higher quality and at lower productions costs than convention cut and sew methods. ADVANTAGES of the process include: greatly reduced production costs; increased quality of garments; reduction in lead time; and capacity to make new class of garments. This technology will accommodate a variety of knit, woven and nonwoven materials containing a majority of synthetic fibers. Among the many style of garments that could be manufactured by this process are: work clothing, career apparel, athletic garments, medical disposables, health care products, activewear, haz/mat garments, military clothing, cleanroom clothing, outdoor wear, upholstery, and highly contoured stuffed toy shells. 3 refs.

  18. SpineCreator: a Graphical User Interface for the Creation of Layered Neural Models.

    Science.gov (United States)

    Cope, A J; Richmond, P; James, S S; Gurney, K; Allerton, D J

    2017-01-01

    There is a growing requirement in computational neuroscience for tools that permit collaborative model building, model sharing, combining existing models into a larger system (multi-scale model integration), and are able to simulate models using a variety of simulation engines and hardware platforms. Layered XML model specification formats solve many of these problems, however they are difficult to write and visualise without tools. Here we describe a new graphical software tool, SpineCreator, which facilitates the creation and visualisation of layered models of point spiking neurons or rate coded neurons without requiring the need for programming. We demonstrate the tool through the reproduction and visualisation of published models and show simulation results using code generation interfaced directly into SpineCreator. As a unique application for the graphical creation of neural networks, SpineCreator represents an important step forward for neuronal modelling.

  19. Bridging the Gap Between Stewards and Creators

    DEFF Research Database (Denmark)

    Austin, Robert; Nolan, Richard L.

    2007-01-01

    Many technology-intensive companies today depend on employees with specialized technical skills, and managers may not fully understand the work these employees do. Moreover, managers and technical employees may have very different worldviews, and their worldviews may conflict during the process...... of business innovation. After researching the movement of Internet and computing pioneers among various organizations during a period between the early 1960s and the mid-1990s, the authors identified two distinct personality types that are both vital to successful technological innovation--but whose mindsets...... often clash. The authors dub these two types stewards and creators. An organization's stewards are usually managers; their goal is the careful allocation of the organization's resources, with an aim of achieving an optimal return on investment. Creators, on the other hand, are often skilled, specialized...

  20. The EPSA Project Finance Mapping Tool

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, Stanton W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chinthavali, Supriya [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-07-01

    The Energy Policy and Systems Analysis Office of DOE has requested a tool to compare the impact of various Federal policies on the financial viability of generation resources across the country. Policy options could include production tax credits, investment tax credits, solar renewable energy credits, tax abatement, accelerated depreciation, tax-free loans, and others. The tool would model the finances of projects in all fifty states, and possibly other geographic units like utility service territories and RTO/ISO territories. The tool would consider the facility s cost, financing, production, and revenues under different capital and market structures to determine things like levelized cost of energy, return on equity, and cost impacts on others (e.g., load-serving entities, society.) The tool would compare the cost and value of the facility to the local regional alternatives to determine how and where policy levers may provide sufficient incremental value to motivate investment. The results will be displayed through a purpose-built visualization that maps geographic variations and shows associated figures and tables.

  1. The patient as service co-creator

    DEFF Research Database (Denmark)

    Moll, Jonas

    2010-01-01

    This paper reports on insights from designing support for patients as participants in their own treatment and care. Informed by the notion of service, the paper illustrates how the new design reconfigures the role of patients to stage a more participatory and co-created practice of care....... By conceptualizing the patient as service co-creator, the paper then explores the consequences and opportunities of this reconfigured role....

  2. LLVM Infrastructure and Tools Project Summary

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, Patrick Sean [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-06

    This project works with the open source LLVM Compiler Infrastructure (http://llvm.org) to provide tools and capabilities that address needs and challenges faced by ECP community (applications, libraries, and other components of the software stack). Our focus is on providing a more productive development environment that enables (i) improved compilation times and code generation for parallelism, (ii) additional features/capabilities within the design and implementations of LLVM components for improved platform/performance portability and (iii) improved aspects related to composition of the underlying implementation details of the programming environment, capturing resource utilization, overheads, etc. -- including runtime systems that are often not easily addressed by application and library developers.

  3. Open Source and Proprietary Project Management Tools for SMEs.

    Directory of Open Access Journals (Sweden)

    Veronika Abramova

    2017-05-01

    Full Text Available The dimensional growth and increasing difficulty in project management promoted the development of different tools that serve to facilitate project management and track project schedule, resources and overall progress. These tools offer a variety of features, from task and time management, up to integrated CRM (Customer Relationship Management and ERP (Enterprise Resource Planning modules. Currently, a large number of project management software is available, to assist project team during the entire project lifecycle. We present the main differences between open source and proprietary project management tools and how those could be important for SMEs, describing the key features and how those can assist the project manager and the development team. In this paper, we analyse four open-source project management tools: OpenProject, ProjectLibre, Redmine, LibrePlan and four proprietary tools: Bitrix24, JIRA, Microsoft Project and Asana.

  4. Implementing PEHR: Design and Integration of a Consent Creator Service.

    Science.gov (United States)

    Weiss, Nicolas; Aguduri, Lakshmi S; Yüksekogul, Nilay; Schreiweis, Björn; Brandner, Antje; Bronsch, Tobias; Pensold, Peter; Stein, Katharina E; Bergh, Björn; Heinze, Oliver

    2016-01-01

    Giving the patient full control over his medical data electronically remains one of the most discussed topics in healthcare today. The INFOPAT project in the Rhine-Neckar region focuses on a personal cross-enterprise electronic health record (PEHR) in which the patient plays a major role. Thus, he should be provided with the possibility of granting access to his medical data which could be realized using a consent creator service. This paper presents a user interface concept for such a service as well as aspects for the technical implementation. In addition, a pattern for integrating the service into an existing IHE based infrastructure is shown. These concepts could be further adapted for improving patient empowerment in health care projects.

  5. Description of a project management system software tool (Sugar)

    International Nuclear Information System (INIS)

    Saito, T.

    2000-01-01

    Toshiba has developed a project management tool that can be applied to large-scale and complicated projects such as the outage of a nuclear power station. The project management tool (Sugar) which Toshiba developed is excellent in operative visibility and extendibility, and has been developed from the beginning for use in nuclear periodic-inspection project control. Here, the development circumstances of this project management tool (Sugar) and the feature are described, and an easy demonstration is provided as an example. (author)

  6. DBMS as a Tool for Project Management

    Science.gov (United States)

    Linder, H.

    1984-01-01

    Scientific objectives of crustal dynamics are listed as well as the contents of the centralized data information system for the crustal dynamics project. The system provides for project observation schedules, gives project configuration control information and project site information.

  7. Outsider Art and the autistic creator.

    Science.gov (United States)

    Cardinal, Roger

    2009-05-27

    Outsider Art (art brut) is defined as a mode of original artistic expression which thrives on its independence, shunning the public sphere and the art market. Such art can be highly idiosyncratic and secretive, and reflects the individual creator's attempt to construct a coherent, albeit strange, private world. Certain practitioners of what may be termed autistic art are examined in the light of this definition; their work is considered as evidence not of a medical condition but of an expressive intentionality entirely worthy of the interest of those drawn to the aesthetic experience.

  8. Nintendo Creators Purgatory: Why YouTubers should think twice before registering for the Nintendo Creators Program

    Directory of Open Access Journals (Sweden)

    Yvette Ann Walker

    2015-12-01

    Full Text Available Recently, Nintendo launched the Nintendo Creators Program, designed to share profits generated from YouTube advertising revenue with YouTube creators using copyrighted Nintendo content. While the program is an insightful response to the problems many content rights holders face in policing YouTube for copyright infringement and submitting take down notices, it as has several pitfalls for creators including exposure to censorship, bureaucracy and content use and abuse.

  9. A Statistical Project Control Tool for Engineering Managers

    Science.gov (United States)

    Bauch, Garland T.

    2001-01-01

    This slide presentation reviews the use of a Statistical Project Control Tool (SPCT) for managing engineering projects. A literature review pointed to a definition of project success, (i.e., A project is successful when the cost, schedule, technical performance, and quality satisfy the customer.) The literature review also pointed to project success factors, and traditional project control tools, and performance measures that are detailed in the report. The essential problem is that with resources becoming more limited, and an increasing number or projects, project failure is increasing, there is a limitation of existing methods and systematic methods are required. The objective of the work is to provide a new statistical project control tool for project managers. Graphs using the SPCT method plotting results of 3 successful projects and 3 failed projects are reviewed, with success and failure being defined by the owner.

  10. Development of funding project risk management tools.

    Science.gov (United States)

    2013-11-01

    Funding project risk management is a process for identifying, assessing, and prioritizing project funding risks. To plan to : minimize or eliminate the impact of negative events, one must identify what projects have higher risk to respond to potentia...

  11. Open Source and Proprietary Project Management Tools for SMEs.

    OpenAIRE

    Veronika Abramova; Francisco Pires; Jorge Bernardino

    2017-01-01

    The dimensional growth and increasing difficulty in project management promoted the development of different tools that serve to facilitate project management and track project schedule, resources and overall progress. These tools offer a variety of features, from task and time management, up to integrated CRM (Customer Relationship Management) and ERP (Enterprise Resource Planning) modules. Currently, a large number of project management software is available, to assist project team during t...

  12. Climate project screening tool: an aid for climate change adaptation

    Science.gov (United States)

    Toni Lyn Morelli; Sharon Yeh; Nikola M. Smith; Mary Beth Hennessy; Constance I. Millar

    2012-01-01

    To address the impacts of climate change, land managers need techniques for incorporating adaptation into ongoing or impending projects. We present a new tool, the Climate Project Screening Tool (CPST), for integrating climate change considerations into project planning as well as for developing concrete adaptation options for land managers. We designed CPST as part of...

  13. Prototype road weather performance management tool : project report : draft report.

    Science.gov (United States)

    2016-09-30

    This report is the Project Report for the Road Weather Performance Management (RW-PM) Tool developed for the project on Development and Demonstration of a Prototype Road Weather Performance Management Application that Uses Connected Vehicle Data (RW-...

  14. Open Source Approach to Project Management Tools

    Directory of Open Access Journals (Sweden)

    Romeo MARGEA

    2011-01-01

    Full Text Available Managing large projects involving different groups of people and complex tasks can be challenging. The solution is to use Project management software, which allows a more efficient management of projects. However, famous project management systems can be costly and may require expensive custom servers. Even if free software is not as complex as Microsoft Project, is noteworthy to think that not all projects need all the features, amenities and power of such systems. There are free and open source software alternatives that meet the needs of most projects, and that allow Web access based on different platforms and locations. A starting stage in adopting an OSS in-house is finding and identifying existing open source solution. In this paper we present an overview of Open Source Project Management Software (OSPMS based on articles, reviews, books and developers’ web sites, about those that seem to be the most popular software in this category.

  15. Legal Protection Against The Dance Creator In Indonesia

    Directory of Open Access Journals (Sweden)

    Juwita

    2015-08-01

    Full Text Available This research aimed to find out and to analyze the ideal legal protection so it can encourage the creator of dance in developing a creation in the field of dance and to find out and to analyze and to get the concept of legal protection of copyright in the field of dance after the enactment of Act No. 28 of 2014 concerns Copyright. This research is empirical juridical. The technique of collecting legal material is conducted through interviews questionnaires to respondents and literature study i.e by collecting various documents in the form of primary secondary and tertiary legal materials. The results of research showed that 1. Dance is a part of copyright associated with diverse art and culture owned by the Indonesian certainly dance produced by consume energy thoughts time and cost by Dance Creator with regard to the creation the state has given protection of dance creator for art as stipulated in Article 40 letter e of Act No. 28 of 2014 as an expression of respect and appreciation to the Dance Creator 2 In association with the regulation on the protection of creative works of art dance regulated in Act No. 28 of 2014 the creator of dance argues is very important to give the protection of dance creator for their copyrighted works particularly their rights as a creator of dance i.e moral and economic rights. Giving moral and economic rights cannot be felt fully by the creator of dance this is due to the creator of dance does not have an institutions that will accommodate the creativity of creators that useful for their welfare.

  16. MoKey: A versatile exergame creator for everyday usage.

    Science.gov (United States)

    Eckert, Martina; López, Marcos; Lázaro, Carlos; Meneses, Juan

    2017-11-27

    Currently, virtual applications for physical exercises are highly appreciated as rehabilitation instruments. This article presents a middleware called "MoKey" (Motion Keyboard), which converts standard off-the-shelf software into exergames (exercise games). A configurable set of gestures, captured by a motion capture camera, is translated into the key strokes required by the chosen software. The present study assesses the tool regarding usability and viability on a heterogeneous group of 11 participants, aged 5 to 51, with moderate to severe disabilities, and mostly bound to a wheelchair. In comparison with FAAST (The Flexible Action and Articulated Skeleton Toolkit), MoKey achieved better results in terms of ease of use and computational load. The viability as an exergame creator tool was proven with help of four applications (PowerPoint®, e-book reader, Skype®, and Tetris). Success rates of up to 91% have been achieved, subjective perception was rated with 4.5 points (from 0-5). The middleware provides increased motivation due to the use of favorite software and the advantage of exploiting it for exercise. Used together with communication software or online games, social inclusion can be stimulated. The therapists can employ the tool to monitor the correctness and progress of the exercises.

  17. Modification of the Creator recombination system for proteomics applications – improved expression by addition of splice sites

    Science.gov (United States)

    Colwill, Karen; Wells, Clark D; Elder, Kelly; Goudreault, Marilyn; Hersi, Kadija; Kulkarni, Sarang; Hardy, W Rod; Pawson, Tony; Morin, Gregg B

    2006-01-01

    Background Recombinational systems have been developed to rapidly shuttle Open Reading Frames (ORFs) into multiple expression vectors in order to analyze the large number of cDNAs available in the post-genomic era. In the Creator system, an ORF introduced into a donor vector can be transferred with Cre recombinase to a library of acceptor vectors optimized for different applications. Usability of the Creator system is impacted by the ability to easily manipulate DNA, the number of acceptor vectors for downstream applications, and the level of protein expression from Creator vectors. Results To date, we have developed over 20 novel acceptor vectors that employ a variety of promoters and epitope tags commonly employed for proteomics applications and gene function analysis. We also made several enhancements to the donor vectors including addition of different multiple cloning sites to allow shuttling from pre-existing vectors and introduction of the lacZ alpha reporter gene to allow for selection. Importantly, in order to ameliorate any effects on protein expression of the loxP site between a 5' tag and ORF, we introduced a splicing event into our expression vectors. The message produced from the resulting 'Creator Splice' vector undergoes splicing in mammalian systems to remove the loxP site. Upon analysis of our Creator Splice constructs, we discovered that protein expression levels were also significantly increased. Conclusion The development of new donor and acceptor vectors has increased versatility during the cloning process and made this system compatible with a wider variety of downstream applications. The modifications introduced in our Creator Splice system were designed to remove extraneous sequences due to recombination but also aided in downstream analysis by increasing protein expression levels. As a result, we can now employ epitope tags that are detected less efficiently and reduce our assay scale to allow for higher throughput. The Creator Splice

  18. Modification of the Creator recombination system for proteomics applications--improved expression by addition of splice sites.

    Science.gov (United States)

    Colwill, Karen; Wells, Clark D; Elder, Kelly; Goudreault, Marilyn; Hersi, Kadija; Kulkarni, Sarang; Hardy, W Rod; Pawson, Tony; Morin, Gregg B

    2006-03-06

    Recombinational systems have been developed to rapidly shuttle Open Reading Frames (ORFs) into multiple expression vectors in order to analyze the large number of cDNAs available in the post-genomic era. In the Creator system, an ORF introduced into a donor vector can be transferred with Cre recombinase to a library of acceptor vectors optimized for different applications. Usability of the Creator system is impacted by the ability to easily manipulate DNA, the number of acceptor vectors for downstream applications, and the level of protein expression from Creator vectors. To date, we have developed over 20 novel acceptor vectors that employ a variety of promoters and epitope tags commonly employed for proteomics applications and gene function analysis. We also made several enhancements to the donor vectors including addition of different multiple cloning sites to allow shuttling from pre-existing vectors and introduction of the lacZ alpha reporter gene to allow for selection. Importantly, in order to ameliorate any effects on protein expression of the loxP site between a 5' tag and ORF, we introduced a splicing event into our expression vectors. The message produced from the resulting 'Creator Splice' vector undergoes splicing in mammalian systems to remove the loxP site. Upon analysis of our Creator Splice constructs, we discovered that protein expression levels were also significantly increased. The development of new donor and acceptor vectors has increased versatility during the cloning process and made this system compatible with a wider variety of downstream applications. The modifications introduced in our Creator Splice system were designed to remove extraneous sequences due to recombination but also aided in downstream analysis by increasing protein expression levels. As a result, we can now employ epitope tags that are detected less efficiently and reduce our assay scale to allow for higher throughput. The Creator Splice system appears to be an extremely

  19. The Exercise: An Exercise Generator Tool for the SOURCe Project

    Science.gov (United States)

    Kakoyianni-Doa, Fryni; Tziafa, Eleni; Naskos, Athanasios

    2016-01-01

    The Exercise, an Exercise generator in the SOURCe project, is a tool that complements the properties and functionalities of the SOURCe project, which includes the search engine for the Searchable Online French-Greek parallel corpus for the UniveRsity of Cyprus (SOURCe) (Kakoyianni-Doa & Tziafa, 2013), the PENCIL (an alignment tool)…

  20. The 'Grand Paris' project: Tools and challenges

    OpenAIRE

    De Palma, André

    2011-01-01

    The purpose of this Round Table is to assess the economic effects of major transport infrastructure projects. The term major projects is used to designate qualitative leaps, be it the mapping out of new road or rail rings to link disparate radial penetration routes or the introduction of more-targeted innovations tackling frequency, speed or automation. (...)

  1. PROJECT MANAGER SKILLS, RISK MANAGEMENT TOOLS

    Directory of Open Access Journals (Sweden)

    Vladut Iacob

    2013-12-01

    Full Text Available Although the projects are different from each other there are many common things that contribute to their success. Looked overall, the success of a project is the result of a multitude of factors. This person is considered the "engine" of the project. The man who makes the action set for the achievement of project objectives to be brought to an end. The project manager must have the technical knowledge and economic diverse. He should be able to choose a team and lead. You must be tenacious, combative, to know how to communicate both within the team and beyond. In a word, the project manager must have an impressive stock of knowledge, skills and abilities and appreciate as Peter Drucker, to "exist for the organization. To be its servant. Any management who forget this will only cause damage to the organization. "This study will focus on highlighting the skills of the project manager and their role in managing difficult situations or risk.

  2. Practical project management: tips, tactics, and tools

    National Research Council Canada - National Science Library

    Levine, Harvey A

    2002-01-01

    ... Elements of Resource Management 4.2 Role-based Needs for Managing Resources in a Project-driven Organization 4.3 Resource Leveling and Games of Chance 4.4 Practical Resource Scheduling 117 119 12...

  3. Telematic Tools to Support Group Projects in Higher Education

    NARCIS (Netherlands)

    van der Veen, Johan (CTIT); Collis, Betty

    We describe ongoing evaluations and new research on the use of telematic tools to support project work in higher education. Practical experience at our University has shown that project work can be implemented using the World Wide Web for many aspects of the project activities. The possibilities

  4. Telematic tools to support group projects in higher education

    NARCIS (Netherlands)

    van der Veen, Johan (CTIT); Collis, Betty; Muldner, T.; Reeves, T.C.

    1997-01-01

    We describe ongoing evaluations and new research on the use of telematic tools to support project work in higher education. Practical experience at our University has shown that project work can be implemented using the World Wide Web for many aspects of the project activities. The possibilities

  5. A New Tool for Effective and Efficient Project Management

    Energy Technology Data Exchange (ETDEWEB)

    Willett, Jesse A [Washington State Univ., Pullman, WA (United States)

    2011-12-01

    Organizations routinely handle thousands of projects per year, and it is difficult to manage all these projects concurrently. Too often, projects do not get the attention they need when they need it. Management inattention can lead to late projects or projects with less than desirable content and/or deliverables. This paper discusses the application of Visual Project Management (VPM) as a method to track and manage projects. The VPM approach proved to be a powerful management tool without the overhead and restrictions of traditional management methods.

  6. The Development of NMA Report Creator

    International Nuclear Information System (INIS)

    Shim, Hye Won

    2012-01-01

    Nuclear Material Accounting (NMA) is the fundamental safeguards measure for both International Atomic Energy Agency (IAEA) and State System of Accounting for and Control of nuclear material (SSAC). The republic of Korea (ROK) signed comprehensive safeguards agreement (INFCIR/236) with IAEA in November 1975. ROK has been reporting accounting information on all nuclear materials subject to safeguards under this agreement since 1976. The accounting information is provided in the form of Inventory Change Report (ICR), Physical Inventory Listings (PIL) and Material Balance Report (MBR). The report forms are designed to reflect all the relevant requirements of the Agency, lend themselves to automatic processing and permit the use of either keywords or codes given in CODE 10 of the General part of subsidiary arrangement to the comprehensive agreement. These report formats are too complicated to be used by facility operators. This seems to be the primary reason of errors in reporting of nuclear material accountancy. Therefore, a report creator was developed to help facility operators prepare reports and ultimately to improve the quality of the accounting reports

  7. The Development of NMA Report Creator

    Energy Technology Data Exchange (ETDEWEB)

    Shim, Hye Won [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2012-05-15

    Nuclear Material Accounting (NMA) is the fundamental safeguards measure for both International Atomic Energy Agency (IAEA) and State System of Accounting for and Control of nuclear material (SSAC). The republic of Korea (ROK) signed comprehensive safeguards agreement (INFCIR/236) with IAEA in November 1975. ROK has been reporting accounting information on all nuclear materials subject to safeguards under this agreement since 1976. The accounting information is provided in the form of Inventory Change Report (ICR), Physical Inventory Listings (PIL) and Material Balance Report (MBR). The report forms are designed to reflect all the relevant requirements of the Agency, lend themselves to automatic processing and permit the use of either keywords or codes given in CODE 10 of the General part of subsidiary arrangement to the comprehensive agreement. These report formats are too complicated to be used by facility operators. This seems to be the primary reason of errors in reporting of nuclear material accountancy. Therefore, a report creator was developed to help facility operators prepare reports and ultimately to improve the quality of the accounting reports

  8. Industrial Engineering Tool Use in Quality Improvement Projects

    Energy Technology Data Exchange (ETDEWEB)

    Rodin, Wayne [Pantex Plant (PTX), Amarillo, TX (United States); Beruvides, Mario [Texas Tech Univ., Lubbock, TX (United States)

    2017-10-30

    This paper presents the results of an examination of industrial engineering tool use in Six Sigma projects for a contractor providing specialty manufacturing and service activities for a United States federal government agency.

  9. Information systems project management: methods, tools, and techniques

    OpenAIRE

    Mcmanus, John; Wood-Harper, Trevor

    2004-01-01

    Information Systems Project Management offers a clear and logical exposition of how to plan, organise and monitor projects effectively in order to deliver quality information systems within time, to budget and quality. This new book by John McManus and Trevor Wood-Harper is suitable for upper level undergraduates and postgraduates studying project management and Information Systems. Practising managers will also find it to be a valuable tool in their work. Managing information systems pro...

  10. Post-project market review as a tool for stimulating commercialisation of knowledge creation projects

    NARCIS (Netherlands)

    Bout, L.Y.; Lombaers, J.H.M.; Constantinides, E.; Weerd-Nederhof, P.C. de

    2009-01-01

    Post-Project Reviews are mainly used as a tool to improve organisational learning (Busby, 1999; von Zedtwitz, 2002). However, the concept of post-project review can also be used as a tool to identify new market potential and to hand over technical knowledge from technical to marketing personnel (von

  11. Post-Project Market Review as a Tool for Stimulating Commercialisation of Knowledge Creation Projects

    NARCIS (Netherlands)

    Bout, Y.; Lombaers, Jaap H.M.; Constantinides, Efthymios; Fisscher, O.A.M.; de Weerd-Nederhof, Petronella C.; Oakey, R.; Groen, A.; Cook, G.; van der Sijde, P.

    2009-01-01

    Post-Project Reviews are mainly used as a tool to improve organisational learning (Busby, 1999; von Zedtwitz, 2002). However, post-project reviews can also be used as a tool to identify new market potential and to hand over technical knowledge from technical to marketing personnel (von Zedtwitz,

  12. Project-Management Tools for Libraries: A Planning and Implementation Model Using Microsoft Project 2000

    OpenAIRE

    Ying Zhang; Corinne Bishop

    2005-01-01

    This paper discusses how Microsoft Project 2000 was utilized at the University of Central Florida Libraries to manage an e-reference implementation project. As libraries today adopt more information technologies, efficiently managing projects can be challenging. The authors’ experience in the implementation of QuestionPoint e-reference software in October 2003 is described. Their conclusion illustrates that project-management tools, such as Microsoft Project 2000, offer practical workflow-man...

  13. PACS project management utilizing web-based tools

    Science.gov (United States)

    Patel, Sunil; Levin, Brad; Gac, Robert J., Jr.; Harding, Douglas, Jr.; Chacko, Anna K.; Radvany, Martin; Romlein, John R.

    2000-05-01

    As Picture Archiving and Communications Systems (PACS) implementations become more widespread, the management of deploying large, multi-facility PACS will become a more frequent occurrence. The tools and usability of the World Wide Web to disseminate project management information obviates time, distance, participant availability, and data format constraints, allowing for the effective collection and dissemination of PACS planning, implementation information, for a potentially limitless number of concurrent PACS sites. This paper will speak to tools, such as (1) a topic specific discussion board, (2) a 'restricted' Intranet, within a 'project' Intranet. We will also discuss project specific methods currently in use in a leading edge, regional PACS implementation concerning the sharing of project schedules, physical drawings, images of implementations, site-specific data, point of contacts lists, project milestones, and a general project overview. The individual benefits realized for the end user from each tool will also be covered. These details will be presented, balanced with a spotlight on communication as a critical component of any project management undertaking. Using today's technology, the web arguably provides the most cost and resource effective vehicle to facilitate the broad based, interactive sharing of project information.

  14. Evolution of project planning tools in a matrix organization

    Energy Technology Data Exchange (ETDEWEB)

    Furaus, J.P.; Figueroa-McInteer, C.; McKeever, P.S.; Wisler, D.B. [Sandia National Labs., Albuquerque, NM (United States); Zavadil, J.T. [Infomatrix (United States)

    1996-10-01

    Until recently, the Corporate Construction Program at Sandia was experiencing difficulties in managing projects: poor planning and cost estimating caused schedule and budget problems. The first step taken was a Microsoft {reg_sign} Project schedule that provides a standard template for scheduling individual construction projects. It is broken down according to the life cycle of the project and prevents the project team from leaving out an important item. A WBS (work breakdown structure) dictionary was also developed that describes how capital and operating funds are used to develop, design, construct, equip, and manage projects. We also developed a matrix chart that maps the planning guide against the major types of construction projects at Sandia. The guide, dictionary, and matrix chart offer enough flexibility that the project manager can make choices about how to structure work, yet ensure that all work rolls up to the cost categories and key DOE WBS elements. As requirements change, the tools can be updated; they also serve as training tools for new project team members.

  15. Project Management Web Tools at the MICE experiment

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    Project management tools like Trac are commonly used within the open-source community to coordinate projects. The Muon Ionization Cooling Experiment (MICE) uses the project management web application Redmine to host mice.rl.ac.uk. Many groups within the experiment have a Redmine project: analysis, computing and software (including offline, online, controls and monitoring, and database subgroups), executive board, and operations. All of these groups use the website to communicate, track effort, develop schedules, and maintain documentation. The issue tracker is a rich tool that is used to identify tasks and monitor progress within groups on timescales ranging from immediate and unexpected problems to milestones that cover the life of the experiment. It allows the prioritization of tasks according to time-sensitivity, while providing a searchable record of work that has been done. This record of work can be used to measure both individual and overall group activity, identify areas lacking sufficient personne...

  16. The physics analysis tools project for the ATLAS experiment

    International Nuclear Information System (INIS)

    Lenzi, Bruno

    2012-01-01

    The Large Hadron Collider is expected to start colliding proton beams in 2009. The enormous amount of data produced by the ATLAS experiment (≅1 PB per year) will be used in searches for the Higgs boson and Physics beyond the standard model. In order to meet this challenge, a suite of common Physics Analysis Tools has been developed as part of the Physics Analysis software project. These tools run within the ATLAS software framework, ATHENA, covering a wide range of applications. There are tools responsible for event selection based on analysed data and detector quality information, tools responsible for specific physics analysis operations including data quality monitoring and physics validation, and complete analysis tool-kits (frameworks) with the goal to aid the physicist to perform his analysis hiding the details of the ATHENA framework. (authors)

  17. Discussion as media and tool in PBL project-groups

    DEFF Research Database (Denmark)

    Spliid, Claus Monrad

    2013-01-01

    on the discussions which groups undertake in their pursuit of problem-solutions fulfilling assessed real-world needs as well as meeting the requirements of the educational program, it is concluded that discussions serve as a media for achieving learning and as a tool for developing skills essential for professional......The Aalborg PBL Model encourages project-management as a way for students to achieve efficiency and effectiveness in their study-projects. This paper looks into how the development of conversation skills relates to project-management as well as other factors. Through analysis of interviews focusing...

  18. Office of River Protection: Simplifying Project management tools

    International Nuclear Information System (INIS)

    TAYLOR, D.G.

    2000-01-01

    The primary approach to the effort was to form a multi-organizational team comprised of federal and contractor staff to develop and implement the necessary tools and systems to manage the project. In late 1999 the DOE Manager of the Office of River Protection formed the Project Integration Office to achieve the objective of managing the efforts as a single project. The first major task, and the foundation upon which to base the development of all other tools, was the establishment of a single baseline of activities. However, defining a single scope schedule and cost was a difficult matter indeed. Work scopes were available throughout the project, but the level of detail and the integration of the activities existed primarily between working groups and individuals and not on a project-wide basis. This creates a situation where technical needs, logic flaws, resource balancing, and other similar integration needs are not elevated for management attention and resolution. It should be noted that probably 90% of the interface issues were known and being addressed. The key is simplifying the process and providing tangible assurance that the other 10% does not contain issues that can delay the project. Fortunately all of the contractors employed a common scheduling tool, which served as the basis for first communicating and then integrating baseline activities. Utilizing a powerful computer-based scheduling tool, it was soon possible to integrate the various schedules after the following was accomplished: Establishment of a scheduling specification (standardized input, coding, and approach to logic); and Clearly defined project assumptions

  19. Forest resource projection tools at the European level

    NARCIS (Netherlands)

    Schelhaas, M.; Nabuurs, G.J.; Verkerk, P.J.; Hengeveld, G.M.; Packalen, Tuula; Sallnäs, O.; Pilli, Roberto; Grassi, J.; Forsell, Nicklas; Frank, S.; Gusti, Mykola; Havlik, Petr

    2017-01-01

    Many countries have developed their own systems for projecting forest resources and wood availability. Although studies using these tools are helpful for developing national policies, they do not provide a consistent assessment for larger regions such as the European Union or Europe as a whole.

  20. Development of a site analysis tool for distributed wind projects

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, Shawn [The Cadmus Group, Inc., Waltham MA (United States)

    2012-02-28

    The Cadmus Group, Inc., in collaboration with the National Renewable Energy Laboratory (NREL) and Encraft, was awarded a grant from the Department of Energy (DOE) to develop a site analysis tool for distributed wind technologies. As the principal investigator for this project, Mr. Shawn Shaw was responsible for overall project management, direction, and technical approach. The product resulting from this project is the Distributed Wind Site Analysis Tool (DSAT), a software tool for analyzing proposed sites for distributed wind technology (DWT) systems. This user-friendly tool supports the long-term growth and stability of the DWT market by providing reliable, realistic estimates of site and system energy output and feasibility. DSAT-which is accessible online and requires no purchase or download of software-is available in two account types; Standard: This free account allows the user to analyze a limited number of sites and to produce a system performance report for each; and Professional: For a small annual fee users can analyze an unlimited number of sites, produce system performance reports, and generate other customizable reports containing key information such as visual influence and wind resources. The tool’s interactive maps allow users to create site models that incorporate the obstructions and terrain types present. Users can generate site reports immediately after entering the requisite site information. Ideally, this tool also educates users regarding good site selection and effective evaluation practices.

  1. Project management web tools at the MICE experiment

    International Nuclear Information System (INIS)

    Coney, L R; Tunnell, C D

    2012-01-01

    Project management tools like Trac are commonly used within the open-source community to coordinate projects. The Muon Ionization Cooling Experiment (MICE) uses the project management web application Redmine to host mice.rl.ac.uk. Many groups within the experiment have a Redmine project: analysis, computing and software (including offline, online, controls and monitoring, and database subgroups), executive board, and operations. All of these groups use the website to communicate, track effort, develop schedules, and maintain documentation. The issue tracker is a rich tool that is used to identify tasks and monitor progress within groups on timescales ranging from immediate and unexpected problems to milestones that cover the life of the experiment. It allows the prioritization of tasks according to time-sensitivity, while providing a searchable record of work that has been done. This record of work can be used to measure both individual and overall group activity, identify areas lacking sufficient personnel or effort, and as a measure of progress against the schedule. Given that MICE, like many particle physics experiments, is an international community, such a system is required to allow easy communication within a global collaboration. Unlike systems that are purely wiki-based, the structure of a project management tool like Redmine allows information to be maintained in a more structured and logical fashion.

  2. Perspectives of creators and performers on the digital era

    NARCIS (Netherlands)

    Poort, J.; Akker, I.; Rutten, P.; Weda, J.

    2015-01-01

    In this contribution, a nearly comprehensive survey among creators and performers in media, arts and entertainment in the Netherlands is presented. It concerns the implications of digital reproduction and distribution for the creative professions as perceived by those working in it. Based on

  3. Perspectives of Creators and Performers on the Digital Era

    NARCIS (Netherlands)

    Poort, J.; Weda, J.; Akker, I.; Rutten, P.

    2013-01-01

    In this contribution, a nearly comprehensive survey among creators and performers in media, arts and entertainment in the Netherlands is presented. It concerns the implications of digital reproduction and distribution for the creative professions as perceived by those working in it. Based on

  4. Situation Creator: A Pedagogical Agent Creating Learning Opportunities

    NARCIS (Netherlands)

    Miao, Yongwu; Hoppe, Ulrich; Pinkwart, Niels

    2007-01-01

    Miao, Y., Hoppe, H. U., & Pinkwart, N. (2007). Situation Creator: A Pedagogical Agent Creating Learning Opportunities. In R. Luckin, K. Koedinger & J. Greer (Eds.), Proceedings of the 13th International Conference on Artificial Intelligence in Education (pp. 614-617). Amsterdam, The Netherlands: IOS

  5. Communication tools for the Hanford Environmental Dose Reconstruction Project

    International Nuclear Information System (INIS)

    Blazek, Mary Lou; Power, Max S.

    1992-01-01

    From 1944 to 1989, the U.S. Department of Energy produced plutonium at the Hanford Site in southeast Washington State. In the early days of operation, large amounts of radioactive materials were released to the environment. Documents about the releases were made public in 1986. The Hanford Environmental Dose Reconstruction Project began in 1987. The Project will determine how much radioactive material was released, how that material may have exposed people, and what radiation doses people may have received. The Project will be complete in 1995. The federal government pays for the work. The scientific work on the study is done by Battelle's Pacific Northwest Laboratory. Public credibility and valid science are equally important to those directing the dose reconstruction work. A number of tools are used to inform the public and encourage public participation. These tools are examined in this paper. (author)

  6. Development of a biogas planning tool for project owners

    DEFF Research Database (Denmark)

    Fredenslund, Anders Michael; Kjær, Tyge

    are considered: Combined heat and power and natural gas grid injection. The main input to the model is the amount and types of substrates available for anaerobic digestion. By substituting the models’ default values with more project specific information, the model can be used in a biogas projects later phases......A spreadsheet model was developed, which can be used as a tool in the initial phases of planning a centralized biogas plant in Denmark. The model assesses energy production, total plant costs, operational costs and revenues and effect on greenhouse gas emissions. Two energy utilization alternatives...

  7. Online Stars and the New Audience: How YouTube Creators Curate and Maintain Communities

    OpenAIRE

    Major, Nathaniel Lloyd

    2015-01-01

    In recent years, YouTube has evolved from a platform of home videos and news media into a premiere platform for amateur content creators to create and distribute content. As YouTube continues to progress towards a media platform that promotes amateur creators and their content, the work and interactions of these creators becomes relevant as a study of the architects of digital labor. This thesis takes an ethnographical approach to examining creators within a certain subset of YouTube creators...

  8. Agile Project Management with Scrum

    CERN Document Server

    Schwaber, Ken

    2009-01-01

    The rules and practices for Scrum-a simple process for managing complex projects-are few, straightforward, and easy to learn. But Scrum's simplicity itself-its lack of prescription-can be disarming, and new practitioners often find themselves reverting to old project management habits and tools and yielding lesser results. In this illuminating series of case studies, Scrum co-creator and evangelist Ken Schwaber identifies the real-world lessons-the successes and failures-culled from his years of experience coaching companies in agile project management. Through them, you'll understand how to

  9. Making project documentation a positive tool for management

    International Nuclear Information System (INIS)

    Shirley, C.G.

    1985-01-01

    Since 1980, Sandia National Laboratory has been designing and constructing Particle Beam Fusion Accelerator II. One managerial challenge of a large project is the problem of handling information. The scope of the PBFA-II projet may be gauged by its cost: $19.4 million for the accelerator itself, $9.5 million for buildings and standard utilities, and $9.6 million for specialized utilities and support systems. The first need of the project at its outset, then, was communication, and this remains a chief function of the CPO. If the nature or magnitude of the risk changes in any one area, the entire project team must know. If a design is changed, persons working on interdependent efforts must know. Some of this communication takes place naturally and informally. But project procedures must guarantee that all important communication is received by all necessary people, that the communication creates accountability, and that management receives timely, accurate reports. To put it another way, important communication requires project documentation. Documentation is both a record of the project and a tool for management

  10. Creator of the capital asset pricing model

    Directory of Open Access Journals (Sweden)

    Pantelić Svetlana

    2014-01-01

    Full Text Available Harry M. Markowite, Merton H. Miller and William F. Sharpe were awarded the Nobel Prize in Economic Sciences in 1990, for their pioneering work in the theory of financial economics. Harry Markowite gave the most significant contribution in portfolio selection, William Sharpe in establishing the equilibrium theory of capital asset pricing (CAPM, and Merton Miller in corporate finance. Their work revolutionized finance through the introduction and implementation of quantitative methods in financial analysis. Sharpe was born in 1934 in Boston, Massachusetts. He received the Bachelor of Arts degree in 1955, the Master of Arts degree in 1956, and PhD degree in Economics in 1961 at the UCLA. In his doctoral dissertation he explored a series of aspects of portfolio analysis, based on a model proposed by Markowite. He spent his working career as a lecturer and professor, taking active part in numerous research projects. He authored many scientific papers and books, having won several awards and being a member of many institutions. He established his own financial consulting firm in 1989.

  11. Systematic Sustainability Assessment (SSA) Tool for Hydroelectric Project in Malaysia

    Science.gov (United States)

    Turan, Faiz Mohd; Johan, Kartina

    2017-08-01

    Sustainably developed and managed hydropower has enormous potential to contribute to global sustainability goals. It is known that hydroelectricity contributing small amounts to greenhouse gas emissions and other atmospheric pollutants. However, developing the remaining hydroelectric potential offers many challenges, and public pressure and expectations on the environmental and social performance of hydroelectric tend to increase over time. This paper aims to develop Systematic Sustainability Assessment (SSA) Tool that promotes and guides more sustainable hydroelectric projects in the context of Malaysia. The proposed SSA tool which not only provide a quality and quantitative report of sustainability performance but also act as Self-Assessment Report (SAR) to provide roadmap to achieve greater level of sustainability in project management for continuous improvement. It is expected to provide a common language that allow government, civil society, financial institutions and the hydroelectric sector to talk about and evaluate sustainability issues. The advantage of SSA tool is it can be used at any stage of hydroelectric development, from the earliest planning stages right through to operation.

  12. Web-based communication tools in a European research project: the example of the TRACE project

    Directory of Open Access Journals (Sweden)

    Baeten V.

    2009-01-01

    Full Text Available The multi-disciplinary and international nature of large European projects requires powerful managerial and communicative tools to ensure the transmission of information to the end-users. One such project is TRACE entitled “Tracing Food Commodities in Europe”. One of its objectives is to provide a communication system dedicated to be the central source of information on food authenticity and traceability in Europe. This paper explores the web tools used and communication vehicles offered to scientists involved in the TRACE project to communicate internally as well as to the public. Two main tools have been built: an Intranet and a public website. The TRACE website can be accessed at http://www.trace.eu.org. A particular emphasis was placed on the efficiency, the relevance and the accessibility of the information, the publicity of the website as well as the use of the collaborative utilities. The rationale of web space design as well as integration of proprietary software solutions are presented. Perspectives on the using of web tools in the research projects are discussed.

  13. Knowledge Based Product Configuration - a documentatio tool for configuration projects

    DEFF Research Database (Denmark)

    Hvam, Lars; Malis, Martin

    2003-01-01

    . A lot of knowledge isput into these systems and many domain experts are involved. This calls for an effective documentation system in order to structure this knowledge in a way that fits to the systems. Standard configuration systems do not support this kind of documentation. The chapter deals...... with the development of a Lotus Notes application that serves as a knowledge based documentation tool for configuration projects. A prototype has been developed and tested empirically in an industrial case-company. It has proved to be a succes....

  14. In-house developed methodologies and tools for decommissioning projects

    International Nuclear Information System (INIS)

    Detilleux, Michel; Centner, Baudouin

    2007-01-01

    The paper describes different methodologies and tools developed in-house by Tractebel Engineering to facilitate the engineering works to be carried out especially in the frame of decommissioning projects. Three examples of tools with their corresponding results are presented: - The LLWAA-DECOM code, a software developed for the radiological characterization of contaminated systems and equipment. The code constitutes a specific module of more general software that was originally developed to characterize radioactive waste streams in order to be able to declare the radiological inventory of critical nuclides, in particular difficult-to-measure radionuclides, to the Authorities. In the case of LLWAA-DECOM, deposited activities inside contaminated equipment (piping, tanks, heat exchangers...) and scaling factors between nuclides, at any given time of the decommissioning time schedule, are calculated on the basis of physical characteristics of the systems and of operational parameters of the nuclear power plant. This methodology was applied to assess decommissioning costs of Belgian NPPs, to characterize the primary system of Trino NPP in Italy, to characterize the equipment of miscellaneous circuits of Ignalina NPP and of Kozloduy unit 1 and, to calculate remaining dose rates around equipment in the frame of the preparation of decommissioning activities; - The VISIMODELLER tool, a user friendly CAD interface developed to ease the introduction of lay-out areas in a software named VISIPLAN. VISIPLAN is a 3D dose rate assessment tool for ALARA work planning, developed by the Belgian Nuclear Research Centre SCK.CEN. Both softwares were used for projects such as the steam generators replacements in Belgian NPPs or the preparation of the decommissioning of units 1 and 2 of Kozloduy NPP; - The DBS software, a software developed to manage the different kinds of activities that are part of the general time schedule of a decommissioning project. For each activity, when relevant

  15. Assess the flood resilience tools integration in the landuse projects

    Science.gov (United States)

    Moulin, E.; Deroubaix, J.-F.

    2012-04-01

    Despite a severe regulation concerning the building in flooding areas, 80% of these areas are already built in the Greater Paris (Paris, Val-de-Marne, Hauts-de-Seine and Seine-Saint-Denis). The land use in flooding area is presented as one of the main solutions to solve the ongoing real estate pressure. For instance some of the industrial wastelands located along the river are currently in redevelopment and residential buildings are planned. So the landuse in the flooding areas is currently a key issue in the development of the Greater Paris area. To deal with floods there are some resilience tools, whether structural (such as perimeter barriers or building aperture barriers, etc) or non structural (such as warning systems, etc.). The technical solutions are available and most of the time efficient1. Still, we notice that these tools are not much implemented. The people; stakeholders and inhabitants, literally seems to be not interested. This papers focus on the integration of resilience tools in urban projects. Indeed one of the blockages in the implementation of an efficient flood risk prevention policy is the lack of concern of the landuse stakeholders and the inhabitants for the risk2. We conducted an important number of interviews with stakeholders involved in various urban projects and we assess, in this communication, to what extent the improvement of the resilience to floods is considered as a main issue in the execution of an urban project? How this concern is maintained or could be maintained throughout the project. Is there a dilution of this concern? In order to develop this topic we rely on a case study. The "Ardoines" is a project aiming at redeveloping an industrial site (South-East Paris), into a project including residential and office buildings and other amenities. In order to elaborate the master plan, the urban planning authority brought together some flood risk experts. According to the comments of the experts, the architect in charge of the

  16. PC tools for project management: Programs and the state-of-the-practice

    Science.gov (United States)

    Bishop, Peter C.; Freedman, Glenn B.; Dede, Christopher J.; Lidwell, William; Learned, David

    1990-01-01

    The use of microcomputer tools for NASA project management; which features are the most useful; the impact of these tools on job performance and individual style; and the prospects for new features in project management tools and related tools are addressed. High, mid, and low end PM tools are examined. The pro's and con's of the tools are assessed relative to various tasks. The strengths and weaknesses of the tools are presented through cases and demonstrations.

  17. Simple Tools to Facilitate Project Management of a Nursing Research Project.

    Science.gov (United States)

    Aycock, Dawn M; Clark, Patricia C; Thomas-Seaton, LaTeshia; Lee, Shih-Yu; Moloney, Margaret

    2016-07-01

    Highly organized project management facilitates rigorous study implementation. Research involves gathering large amounts of information that can be overwhelming when organizational strategies are not used. We describe a variety of project management and organizational tools used in different studies that may be particularly useful for novice researchers. The studies were a multisite study of caregivers of stroke survivors, an Internet-based diary study of women with migraines, and a pilot study testing a sleep intervention in mothers of low-birth-weight infants. Project management tools were used to facilitate enrollment, data collection, and access to results. The tools included protocol and eligibility checklists, event calendars, screening and enrollment logs, instrument scoring tables, and data summary sheets. These tools created efficiency, promoted a positive image, minimized errors, and provided researchers with a sense of control. For the studies described, there were no protocol violations, there were minimal missing data, and the integrity of data collection was maintained. © The Author(s) 2016.

  18. Legal Protection Against The Dance Creator In Indonesia

    OpenAIRE

    Juwita; Juajir Sumardi; Oky Deviany Burhamzah; Hasbir Paserangi

    2015-01-01

    This research aimed to find out and to analyze the ideal legal protection so it can encourage the creator of dance in developing a creation in the field of dance and to find out and to analyze and to get the concept of legal protection of copyright in the field of dance after the enactment of Act No. 28 of 2014 concerns Copyright. This research is empirical juridical. The technique of collecting legal material is conducted through interviews questionnaires to respondents and literature study ...

  19. Ensuring Credit to Data Creators: A Case Study for Geodesy

    Science.gov (United States)

    Boler, F. M.; Gorman, A.

    2011-12-01

    UNAVCO, the NSF and NASA-funded facility that supports and promotes Earth science by advancing high-precision techniques for the measurement of crustal deformation, has operated a Global Navigation Satellite System (GNSS) Data Archive since 1992. For the GNSS domain, the UNAVCO Archive has established best practices for data and metadata preservation, and provides tools for openly tracking data provenance. The GNSS data collection at the UNAVCO Archive represents the efforts of over 400 principal investigators and uncounted years of effort by these individuals and their students in globally distributed field installations, sometimes in situations of significant danger, whether from geologic hazards or political/civil unrest. Our investigators also expend considerable effort in following best practices for data and metadata management. UNAVCO, with the support of its consortium membership, has committed to an open data policy for data in the Archive. Once the data and metadata are archived by UNAVCO, they are distributed by anonymous access to thousands of users who cannot be accurately identified. Consequently, the UNAVCO commitment to open data access was reached with a degree of trepidation on the part of a segment of the principal investigators who contribute their data with no guarantee that their colleagues (or competitors) will follow a code of ethics in their research and publications with respect to the data they have downloaded from the UNAVCO Archive. The UNAVCO community has recognized the need to develop, adopt, and follow a data citation policy among themselves and to advocate for data citation more generally within the science publication arena. The role of the UNAVCO Archive in this process has been to provide data citation guidance and to develop and implement mechanisms to assign digital object identifiers (DOIs) to data sets within the UNAVCO Archive. The UNAVCO community is interested in digital object identifiers primarily as a means to

  20. Artificial intelligence - New tools for aerospace project managers

    Science.gov (United States)

    Moja, D. C.

    1985-01-01

    Artificial Intelligence (AI) is currently being used for business-oriented, money-making applications, such as medical diagnosis, computer system configuration, and geological exploration. The present paper has the objective to assess new AI tools and techniques which will be available to assist aerospace managers in the accomplishment of their tasks. A study conducted by Brown and Cheeseman (1983) indicates that AI will be employed in all traditional management areas, taking into account goal setting, decision making, policy formulation, evaluation, planning, budgeting, auditing, personnel management, training, legal affairs, and procurement. Artificial intelligence/expert systems are discussed, giving attention to the three primary areas concerned with intelligent robots, natural language interfaces, and expert systems. Aspects of information retrieval are also considered along with the decision support system, and expert systems for project planning and scheduling.

  1. THE FINANCIAL TOOLS FOR COVER POLITICAL RISKS IN PROJECT FINANCE

    Directory of Open Access Journals (Sweden)

    S. Naumenkova

    2016-10-01

    Full Text Available This article examines the risk-mitigation in public-private partnership. Today Ukraine is ranked as "CRT-5 country" and has high levels of economic and political risk. Political risk grows steadily because of financial and political instability in Ukraine. We conclude that investors continue to rank political risk as a key obstacle to long-term investing. The tools for cover many types of political risks such as war, terrorism, civil disturbance, breach of contract, export or operating license cancellation, currency inconvertibility and transfer restriction, change of laws and regulations etc. are described by authors. We focus on the advantages of World Bank Group Guarantee products. The guarantee instruments of the three WBG institutions for cover political risks under different circumstances are the most suitable for public-private partnership in Ukraine. In this article the political risk-mitigation with IBRD Partial Risk Guarantee put forward by authors for PPP projects in Ukraine.

  2. Technology of focus detection for 193nm projection lithographic tool

    Science.gov (United States)

    Di, Chengliang; Yan, Wei; Hu, Song; Xu, Feng; Li, Jinglong

    2012-10-01

    With the shortening printing wavelength and increasing numerical aperture of lithographic tool, the depth of focus(DOF) sees a rapidly drop down trend, reach a scale of several hundred nanometers while the repeatable accuracy of focusing and leveling must be one-tenth of DOF, approximately several dozen nanometers. For this feature, this article first introduces several focusing technology, Obtained the advantages and disadvantages of various methods by comparing. Then get the accuracy of dual-grating focusing method through theoretical calculation. And the dual-grating focusing method based on photoelastic modulation is divided into coarse focusing and precise focusing method to analyze, establishing image processing model of coarse focusing and photoelastic modulation model of accurate focusing. Finally, focusing algorithm is simulated with MATLAB. In conclusion dual-grating focusing method shows high precision, high efficiency and non-contact measurement of the focal plane, meeting the demands of focusing in 193nm projection lithography.

  3. Project management support tool implementation. DynaLearn, EC FP7 STREP project 231526, Deliverable D1.1

    NARCIS (Netherlands)

    Bredeweg, B.; Liem, J.

    2009-01-01

    Different project management tools have been evaluated. We have chosen several well-known, flexible and mature tools to support management activities and communication between the DynaLearn project participants. We have created a DynaLearn website for stakeholders outside the DynaLearn website. An

  4. An Instructional Feedback Technique for Teaching Project Management Tools Aligned with PMBOK

    Science.gov (United States)

    Gonçalves, Rafael Queiroz; von Wangenheim, Christiane Gresse; Hauck, Jean Carlo Rossa; Petri, Giani

    2017-01-01

    The management of contemporary software projects is unfeasible without the support of a Project Management (PM) tool. In order to enable the adoption of PM tools in practice, teaching its usage is important as part of computer education. Aiming at teaching PM tools, several approaches have been proposed, such as the development of educational PM…

  5. Tools for Monitoring Social Media: A Marketing Research Project

    Science.gov (United States)

    Veeck, Ann; Hoger, Beth

    2014-01-01

    Knowledge of how to effectively monitor social media is an increasingly valued marketing research skill. This study tests an approach for adding social media content to an undergraduate marketing research class team project. The revised project maintains the expected objectives and parameters of a traditional research project, while integrating…

  6. Earth History databases and visualization - the TimeScale Creator system

    Science.gov (United States)

    Ogg, James; Lugowski, Adam; Gradstein, Felix

    2010-05-01

    The "TimeScale Creator" team (www.tscreator.org) and the Subcommission on Stratigraphic Information (stratigraphy.science.purdue.edu) of the International Commission on Stratigraphy (www.stratigraphy.org) has worked with numerous geoscientists and geological surveys to prepare reference datasets for global and regional stratigraphy. All events are currently calibrated to Geologic Time Scale 2004 (Gradstein et al., 2004, Cambridge Univ. Press) and Concise Geologic Time Scale (Ogg et al., 2008, Cambridge Univ. Press); but the array of intercalibrations enable dynamic adjustment to future numerical age scales and interpolation methods. The main "global" database contains over 25,000 events/zones from paleontology, geomagnetics, sea-level and sequence stratigraphy, igneous provinces, bolide impacts, plus several stable isotope curves and image sets. Several regional datasets are provided in conjunction with geological surveys, with numerical ages interpolated using a similar flexible inter-calibration procedure. For example, a joint program with Geoscience Australia has compiled an extensive Australian regional biostratigraphy and a full array of basin lithologic columns with each formation linked to public lexicons of all Proterozoic through Phanerozoic basins - nearly 500 columns of over 9,000 data lines plus hot-curser links to oil-gas reference wells. Other datapacks include New Zealand biostratigraphy and basin transects (ca. 200 columns), Russian biostratigraphy, British Isles regional stratigraphy, Gulf of Mexico biostratigraphy and lithostratigraphy, high-resolution Neogene stable isotope curves and ice-core data, human cultural episodes, and Circum-Arctic stratigraphy sets. The growing library of datasets is designed for viewing and chart-making in the free "TimeScale Creator" JAVA package. This visualization system produces a screen display of the user-selected time-span and the selected columns of geologic time scale information. The user can change the

  7. Giovanni-Battista Morgagni (1682-1773): creator of pathological anatomy.

    Science.gov (United States)

    Androutsos, G

    2006-01-01

    The great anatomist Giovanni-Battista Morgagni by his major textbook De Sedibus is the creator of pathological anatomy and the one who rendered this new discipline an indispensable specialization of modern medicine.

  8. Are HLS Tools Healthy? The C-Cubed Project

    Directory of Open Access Journals (Sweden)

    M. Dossis

    2015-04-01

    Full Text Available The increasing complexity of Application Specific Integrated Circuits (ASICs and Systems-on-Chip (SoCs that incorporate custom and standard embedded core IP blocks dictates the need for a new generation of automated and formal system EDA tools and methodologies. High-Level Synthesis (HLS plays a critical role in the required Electronic System Level (ESL methodologies. However, most of the available academic and commercial High-Level Synthesis (HLS tools still do not play an established role in the system and hardware engineering teams. This is true for a number of practical reasons, analyzed and discussed in this work. The present article is a practical perspective of the required fully automated and formal tools, which are needed to constitute integral parts in Electronic Design Automation (EDA flows. In addition, this article is a useful guide to the system engineer who wants to familiarize with HLS tools and to select the appropriate tool for the everyday engineering practice. The advanced HLS toolset that is analyzed in this paper is developed by the first author, its C-frontend by the second author, and they are both based on formal methods and fully automated techniques, thus they guarantee the correctness of the synthesized hardware implementations. This paper completes with a number of experiments that were executed using the author’s methodology and they are used to evaluate the specific HLS tools. Consequently, a number of conclusions are drawn as well as suggestions for the future directions of HLS technology. In this way, what is practically needed by the hardware systems engineering community is outlined at the end of the paper.

  9. Strategic plan: A tool to improve IPP project earnings

    International Nuclear Information System (INIS)

    LeClerc, S.

    1997-01-01

    This paper presents a strategic plan to analyze and convert project operations to gain short-term and long-term economic benefits. Areas of Opportunity were identified which may result in improved project economics from Independent Power Producers' project reviews. This paper discusses each Area of Opportunity, suggests options for investigation, and provides a potential magnitude of upside for solid fuel circulating fluidized bed projects in the 50 MW project size. The Areas of Opportunity are: (1) Power Purchase Agreement Modifications; (2) Fuel Use Optimization; (3) Power Plant Upgrades; (4) Power Plant Depreciation Schedule And FAS 121 Analysis; (5) Operation ampersand Maintenance Review; (6) Financial Contract Review; (7) Environmental Review; (8) Insurance Coverage Review; (9) Internal Management Review; and (10) Strategic Development For Energy Sales. Ten appendices are included which comprise a sample Strategic Plan: (1) Potential Plant Upgrades, (2) Enhancement Criteria, (3) Age of Coal Burning Plants, (4) Btu Energy Price Summary, (5) Typical Operation and Maintenance Audit Findings, (6) Typical Performance Objectives and Guidelines, (7) Typical Heavy Metal Emissions, (8) Typical Strategic Plan Formulation, (9) Strategic Plan Implementation Schedule, and (10) Typical Decision Tree. 8 refs

  10. The development of a partnering assessment tool for projects

    NARCIS (Netherlands)

    Holkers, A.; Voordijk, Johannes T.; Greenwood, D

    2008-01-01

    Many firms in the construction industry claim to be working in a ‘partnering’ or even in an ‘integrated’ way. It is, however, very difficult to verify these claims with the tools currently available. The purpose of this study was to collect and refine existing work on integrative and collaborative

  11. Making project documentation a positive tool for management

    International Nuclear Information System (INIS)

    Shirley, C.G.

    1986-01-01

    Sandia National Laboratories is constructing Particle Beam Fusion Accelerator II, a research facility built as a major project of the U.S. Department of Energy and theoretically capable of controlled nuclear fusion. To manage technical development, the project team has evolved a documentation system with both conventional and unconventional elements. Project documentation is functional because it is usable and authoritative. Usability results from layering by audience and purpose, appropriate sequence and format, accessibility, directness, and currency. Authority results from comprehensiveness, document control, insistence on written requirements, and consistency in applying procedures. As basic communication models illustrate, every document needs a producer, a recipient, a subject, and a feedback path. Managers can promote functional documentation by planning for feedback, using fulltime documentors wisely, setting priorities, planning for effective data collection, and treating documentation as a subproject

  12. Interview with the Creators of Love/Hate

    Directory of Open Access Journals (Sweden)

    Carolan, Stuart

    2016-12-01

    Full Text Available On 25th November 2015, Studies in Arts and Humanities (SAH Journal hosted a public interview with leading Irish film and television producer James Flynn (Octagon Productions and creator/writer of the groundbreaking Irish television drama Love/Hate Stuart Carolan. The interview was conducted by Conor Murphy (Editor-in-Chief, SAH Journal at Filmbase Ireland before a live audience comprising students and faculty from the film schools of Dublin Business School, Filmbase and Pulse College. This lively and thought-provoking interview provided key insights into the artistic and production processes behind the making of a successful TV drama. James Flynn gave a detailed overview of the funding and legislative frameworks in which the modern day film producer operates both in Ireland and overseas. He provided a fascinating timeline of developments in the filmmaking industry in Ireland in parallel with his own career over the last twenty years. Stuart Carolan explained how the rich and varied characters that inhabit Love/Hate come into being and offered an insight into the daily writing rituals that shaped the development of character, plot and pace. He also spoke about the significance of casting in Love/Hate on the development of the story. The casting of John Connors, for example, influenced Stuart to develop a traveller theme to a greater extent than initially intended. Stuart’s passion for social justice and equality was evident throughout the interview. The interview is replete with analysis of the process of developing Love/Hate including the logistics of shooting in multiple locations and the tight deadlines under which they operated. In addition, James and Stuart offered focussed, helpful and encouraging advice for emerging screenwriters and filmmakers.

  13. The influence of Cervantes on the future creator of psychoanalysis.

    Science.gov (United States)

    Grinberg, L; Rodríguez, J F

    1984-01-01

    Our work is intended to recreate the origins of the 'future creator of psychoanalysis'. Cervantes had a decisive influence on Freud. Don Quixote occupied a central place during a period which we consider to be crucial in the creation of psychoanalysis; we refer to the summer of 1883 during which Freud confessed to Martha that he had become more interested in this book than in brain anatomy. In this work, Cervantes delves in-depth into problems which he had set out in The Colloquy of the Dogs, read by Freud in his adolescence when he was learning Spanish and which confronted some of the great psychoanalytic themes such as reality-fantasy, language, instinct and reason, traumatic situations, 'family romance', etc. These themes appear in a psychoanalytically structured dialogue in which one of the dogs, Berganza, tells his life story (in the form of catharsis) to the other dog, Cipión, with whom Freud identified himself. Basically, it is the psychotherapeutic model that Freud used with his own hysterical patients. Another dialogue which was essential for Freud was that of Don Quixote and Sancho Panza, due to the following major reasons (as well as others): For the clear discrimination between reality and fantasy as well as their interplay. Because madness is presented as a complex phenomenon, but intelligible in terms of human motives. For the penetrating description of the transition in Don Quixote from mania to depression. Because at that moment of his life, Freud himself was living through a personal conflict between his dreams of carrying out some scientific feat and the demands of attending to his mundane necessities.

  14. The ZAP Project: Designing Interactive Computer Tools for Learning Psychology

    Science.gov (United States)

    Hulshof, Casper; Eysink, Tessa; de Jong, Ton

    2006-01-01

    In the ZAP project, a set of interactive computer programs called "ZAPs" was developed. The programs were designed in such a way that first-year students experience psychological phenomena in a vivid and self-explanatory way. Students can either take the role of participant in a psychological experiment, they can experience phenomena themselves,…

  15. Advanced prototyping tools for project- and problem-based learning

    DEFF Research Database (Denmark)

    Teodorescu, Remus; Bech, Michael Møller; Holm, Allan J.

    2002-01-01

    A new approach in prototyping for project- and problem-based learning is achieved by using the new Total Development Environment concept introduced by dSPACE that allows a full visual block-oriented programming of dynamic real-time systems to be achieved  using the Matlab/Simulink environment...

  16. Using the Communication Methods, Tools and Support During Management of Project Communication in Industrial Manufacturing Enterprises

    Science.gov (United States)

    Samáková, Jana; Babčanová, Dagmar; Hrablikchovanová, Henrieta; Mesárošová, Jana; Šujanová, Jana

    2017-09-01

    Effective communication is the most significant ability for project manager and successful project. However, during the management of projects communication, it is very often forgotten, often overlooked or taken for granted. In the management of projects, it is principally necessary to deal with communication during all project lifecycle. Within the project communication, it is very important to define the main methods, tools, support of communication and frequency of communication; these belong to the most important elements of the communication channel which is very often forgotten. Therefore, the main aim of the paper is to analyse the utilisation of the communication channel: communication methods, communication tools, communication frequency and to support project communication in industrial manufacturing enterprises in Slovakia. Based on the research, we can conclude that communication channel is not adequately elaborated in international methodologies and standards of project management as well as in industrial manufacturing enterprises. These facts are very negative, conclusion and it is therefore necessary to deal with the problem.

  17. Open dementia project: Empathic tools between magic and everyday life

    OpenAIRE

    Lee, Yanki; Hendriks, Niels; Tsang, Albert

    2017-01-01

    In Chinese society like in many cultures, persons with dementia suffer some level of stigmatisation. For this reason a dementia research/care centre in Hong Kong (China) initiated the design of the “dementia experience tool”. Its main goal is to create public understanding through inviting the general public to experience dementia. The dementia research/care centre commissioned a social design research lab team (two of the authors are part of this) to create the tool, sta...

  18. Diagnostic framework and health check tool for engineering and technology projects

    Directory of Open Access Journals (Sweden)

    Simon P Philbin

    2014-10-01

    Full Text Available Purpose: Development of a practitioner oriented diagnostic framework and health check tool to support the robust assessment of engineering and technology projects.Design/methodology/approach: The research is based on a literature review that draws together insights on project assessment and critical success factors to establish an integrated systems view of projects. This is extended to allow a comprehensive diagnostic framework to be developed along with a high-level health check tool that can be readily deployed on projects. The utility of the diagnostic framework and health check tool are explored through three illustrative case studies, with two from Canada and one from the United Kingdom. Findings andOriginality/value: The performance of engineering and technology projects can be viewed through a systems perspective and being a function of six sub-systems that are: process, technology, resources, impact, knowledge and culture. The diagnostic framework that is developed through this research integrates these sub-systems to provide a comprehensive assessment methodology for projects, which is linked to existing best practice for project reviews, performance management and maturity models. The case studies provide managerial insights that are related to the diagnostic framework but crucially also position the approach in the context of industrial applications for construction engineering and technology management.Research limitations/implications: The case study approach includes two case studies from the construction and facilities development sector with the third case study from the research and technology sector. Further work is required to investigate the use of the diagnostic framework and health check tool in other sectors.Practical implications: The health check tool will be of practical benefit to new projects managers that require access to a robust and convenient project review methodology for assessing the status and health of a

  19. Lessons learned applying CASE methods/tools to Ada software development projects

    Science.gov (United States)

    Blumberg, Maurice H.; Randall, Richard L.

    1993-01-01

    This paper describes the lessons learned from introducing CASE methods/tools into organizations and applying them to actual Ada software development projects. This paper will be useful to any organization planning to introduce a software engineering environment (SEE) or evolving an existing one. It contains management level lessons learned, as well as lessons learned in using specific SEE tools/methods. The experiences presented are from Alpha Test projects established under the STARS (Software Technology for Adaptable and Reliable Systems) project. They reflect the front end efforts by those projects to understand the tools/methods, initial experiences in their introduction and use, and later experiences in the use of specific tools/methods and the introduction of new ones.

  20. Risk management for engineering projects procedures, methods and tools

    CERN Document Server

    Munier, Nolberto

    2014-01-01

    Many people see risk in engineering projects as an imprecise and nebulous problem - something that exists, is feared and is impossible to deal with. Nothing could be further from the truth. While risk is certainly ubiquitous, sometimes difficult to detect, and cannot always be completely avoided, it can generally be mitigated, reduced or prevented through timely analysis and action.   This book covers the entire process of risk management by providing methodologies for determining the sources of project risk, and once threats have been identified, managing them through:   ·         identification and assessment (probability, relative importance, variables, risk breakdown structure, etc.) ·         implementation of measures for their prevention, reduction or mitigation ·         evaluation of impacts and quantification of risks ·         establishment of control measures   It also considers sensitivity analysis to determine the influence of uncertain parameters values ...

  1. PROJECT FINANCE AS A TOOL FOR THE IMPLEMENTATION OF INVESTMENT PROJECTS

    Directory of Open Access Journals (Sweden)

    U. V. Vsyakih

    2015-02-01

    Full Text Available The article discusses the reasons for the insufficient use of project financing in the Russian Federation, the brief historical background for the project financing in Russia, as well as the main principles, types and stages of project financing. For results was used theoretical methods associated with the study of general and specialized literature, as well as methods of analysis and synthesis.

  2. The project organization as a policy tool in implementing welfare reforms in the public sector.

    Science.gov (United States)

    Jensen, Christian; Johansson, Staffan; Löfström, Mikael

    2013-01-01

    Organizational design is considered in policy literature as a forceful policy tool to put policy to action. However, previous research has not analyzed the project organization as a specific form of organizational design and, hence, has not given much attention to such organizations as a strategic choice when selecting policy tools. The purpose of the article is to investigate the project as a policy tool; how do such temporary organizations function as a specific form of organization when public policy is implemented? The article is based on a framework of policy implementation and is illustrated with two welfare reforms in the Swedish public sector, which were organized and implemented as project organizations. The case studies and the analysis show that it is crucial that a project organization fits into the overall governance structure when used as a policy tool. If not, the project will remain encapsulated and will not have sufficient impact on the permanent organizational structure. The concept of encapsulation indicates a need to protect the project from a potential hostile environment. The implication of this is that organizational design as a policy tool is a matter that deserves more attention in the strategic discussion on implementing public policies and on the suitability of using certain policy tools. Copyright © 2012 John Wiley & Sons, Ltd.

  3. Development of a Multi-Domain Assessment Tool for Quality Improvement Projects.

    Science.gov (United States)

    Rosenbluth, Glenn; Burman, Natalie J; Ranji, Sumant R; Boscardin, Christy K

    2017-08-01

    Improving the quality of health care and education has become a mandate at all levels within the medical profession. While several published quality improvement (QI) assessment tools exist, all have limitations in addressing the range of QI projects undertaken by learners in undergraduate medical education, graduate medical education, and continuing medical education. We developed and validated a tool to assess QI projects with learner engagement across the educational continuum. After reviewing existing tools, we interviewed local faculty who taught QI to understand how learners were engaged and what these faculty wanted in an ideal assessment tool. We then developed a list of competencies associated with QI, established items linked to these competencies, revised the items using an iterative process, and collected validity evidence for the tool. The resulting Multi-Domain Assessment of Quality Improvement Projects (MAQIP) rating tool contains 9 items, with criteria that may be completely fulfilled, partially fulfilled, or not fulfilled. Interrater reliability was 0.77. Untrained local faculty were able to use the tool with minimal guidance. The MAQIP is a 9-item, user-friendly tool that can be used to assess QI projects at various stages and to provide formative and summative feedback to learners at all levels.

  4. Project officer's perspective: quality assurance as a management tool.

    Science.gov (United States)

    Heiby, J

    1993-06-01

    Advances in the management of health programs in less developed countries (LDC) have not kept pace with the progress of the technology used. The US Agency for International Development mandated the Quality Assurance Project (QAP) to provide quality improvement technical assistance to primary health care systems in LDCs while developing appropriate quality assurance (QA) strategies. The quality of health care in recent years in the US and Europe focused on the introduction of management techniques developed for industry into health systems. The experience of the QAP and its predecessor, the PRICOR Project, shows that quality improvement techniques facilitate measurement of quality of care. A recently developed WHO model for the management of the sick child provides scientifically based standards for actual care. Since 1988, outside investigators measuring how LDC clinicians perform have revealed serious deficiencies in quality compared with the program's own standards. This prompted developed of new QA management initiatives: 1) communicating standards clearly to the program staff; 2) actively monitoring actual performance corresponds to these standards; and 3) taking action to improve performance. QA means that managers are expected to monitor service delivery, undertake problem solving, and set specific targets for quality improvement. Quality improvement methods strengthen supervision as supervisors can objectively assess health worker performance. QA strengthens the management functions that support service delivery, e.g., training, records management, finance, logistics, and supervision. Attention to quality can contribute to improved health worker motivation and effective incentive programs by recognition for a job well done and opportunities for learning new skills. These standards can also address patient satisfaction. QA challenges managers to aim for the optimal level of care attainable.

  5. Automatic tools for enhancing the collaborative experience in large projects

    International Nuclear Information System (INIS)

    Bourilkov, D; Rodriquez, J L

    2014-01-01

    With the explosion of big data in many fields, the efficient management of knowledge about all aspects of the data analysis gains in importance. A key feature of collaboration in large scale projects is keeping a log of what is being done and how - for private use, reuse, and for sharing selected parts with collaborators and peers, often distributed geographically on an increasingly global scale. Even better if the log is automatically created on the fly while the scientist or software developer is working in a habitual way, without the need for extra efforts. This saves time and enables a team to do more with the same resources. The CODESH - COllaborative DEvelopment SHell - and CAVES - Collaborative Analysis Versioning Environment System projects address this problem in a novel way. They build on the concepts of virtual states and transitions to enhance the collaborative experience by providing automatic persistent virtual logbooks. CAVES is designed for sessions of distributed data analysis using the popular ROOT framework, while CODESH generalizes the approach for any type of work on the command line in typical UNIX shells like bash or tcsh. Repositories of sessions can be configured dynamically to record and make available the knowledge accumulated in the course of a scientific or software endeavor. Access can be controlled to define logbooks of private sessions or sessions shared within or between collaborating groups. A typical use case is building working scalable systems for analysis of Petascale volumes of data as encountered in the LHC experiments. Our approach is general enough to find applications in many fields.

  6. Tools for Closure Project and Contract Management: Development of the Rocky Flats Integrated Closure Project Baseline

    International Nuclear Information System (INIS)

    Gelles, C. M.; Sheppard, F. R.

    2002-01-01

    This paper details the development of the Rocky Flats Integrated Closure Project Baseline - an innovative project management effort undertaken to ensure proactive management of the Rocky Flats Closure Contract in support of the Department's goal for achieving the safe closure of the Rocky Flats Environmental Technology Site (RFETS) in December 2006. The accelerated closure of RFETS is one of the most prominent projects within the Department of Energy (DOE) Environmental Management program. As the first major former weapons plant to be remediated and closed, it is a first-of-kind effort requiring the resolution of multiple complex technical and institutional challenges. Most significantly, the closure of RFETS is dependent upon the shipment of all special nuclear material and wastes to other DOE sites. The Department is actively working to strengthen project management across programs, and there is increasing external interest in this progress. The development of the Rocky Flats Integrated Closure Project Baseline represents a groundbreaking and cooperative effort to formalize the management of such a complex project across multiple sites and organizations. It is original in both scope and process, however it provides a useful precedent for the other ongoing project management efforts within the Environmental Management program

  7. AstrodyToolsWeb an e-Science project in Astrodynamics and Celestial Mechanics fields

    Science.gov (United States)

    López, R.; San-Juan, J. F.

    2013-05-01

    Astrodynamics Web Tools, AstrodyToolsWeb (http://tastrody.unirioja.es), is an ongoing collaborative Web Tools computing infrastructure project which has been specially designed to support scientific computation. AstrodyToolsWeb provides project collaborators with all the technical and human facilities in order to wrap, manage, and use specialized noncommercial software tools in Astrodynamics and Celestial Mechanics fields, with the aim of optimizing the use of resources, both human and material. However, this project is open to collaboration from the whole scientific community in order to create a library of useful tools and their corresponding theoretical backgrounds. AstrodyToolsWeb offers a user-friendly web interface in order to choose applications, introduce data, and select appropriate constraints in an intuitive and easy way for the user. After that, the application is executed in real time, whenever possible; then the critical information about program behavior (errors and logs) and output, including the postprocessing and interpretation of its results (graphical representation of data, statistical analysis or whatever manipulation therein), are shown via the same web interface or can be downloaded to the user's computer.

  8. Facilitating Adoption of Web Tools for Problem and Project Based Learning Activities

    DEFF Research Database (Denmark)

    Khalid, Md. Saifuddin; Rongbutsri, Nikorn; Buus, Lillian

    2012-01-01

    and project based learning. In the area of problem and project based learning, facilitation is the core term and the teacher often has the role as facilitator or moderator instead of a teacher teaching. Technology adoption for learning activities needs facilitation, which is mostly absent. Sustainable......This paper builds on research directions from ‘activity theory’ and ‘learning design’ to provide ‘facilitation’ for students standing within decision making related to selection of web 2.0 tools and university provided web-based applications for supporting students activities within problem...... adoption might be facilitated based on tool appropriation with activities associated with courses and projects. Our mapping of different tools in a framework is reported based on interviews, observations, narratives and survey. A direction towards facilitation process for adoption is discussed as part...

  9. Software project management tools in global software development: a systematic mapping study.

    Science.gov (United States)

    Chadli, Saad Yasser; Idri, Ali; Ros, Joaquín Nicolás; Fernández-Alemán, José Luis; de Gea, Juan M Carrillo; Toval, Ambrosio

    2016-01-01

    Global software development (GSD) which is a growing trend in the software industry is characterized by a highly distributed environment. Performing software project management (SPM) in such conditions implies the need to overcome new limitations resulting from cultural, temporal and geographic separation. The aim of this research is to discover and classify the various tools mentioned in literature that provide GSD project managers with support and to identify in what way they support group interaction. A systematic mapping study has been performed by means of automatic searches in five sources. We have then synthesized the data extracted and presented the results of this study. A total of 102 tools were identified as being used in SPM activities in GSD. We have classified these tools, according to the software life cycle process on which they focus and how they support the 3C collaboration model (communication, coordination and cooperation). The majority of the tools found are standalone tools (77%). A small number of platforms (8%) also offer a set of interacting tools that cover the software development lifecycle. Results also indicate that SPM areas in GSD are not adequately supported by corresponding tools and deserve more attention from tool builders.

  10. Conformity Assessment as a Tool for Organizational Learning in Large Engineering and Construction Projects

    Directory of Open Access Journals (Sweden)

    Luciano Assalim

    2013-05-01

    Full Text Available For the successful realization of large engineering and construction projects (LECPs, a systemic organizational learning framework for institutional cooperation is critical. Due to the long project life-cycle of LECPs, this is particularly important for this kind of project. The objective of this paper is to analyze to what extent the conformity assessment of LECPs, carried out under Engineering, Procurement and Construction management (EPCm services, can be used as a tool for organizational learning and cooperation between typical stakeholders (project owners, engineering contractors, EPC contractors; subcontractors and certification bodies. The research, from which this paper emanates, was based on a case study concerning LECPs in an oil and gas company in Brazil. Based on its results, we suggest that the proposed organizational learning framework, supported by the conformity assessment rationale, constitutes an important management tool that can be disseminated in other organizational contexts where conformity assessments of LECPs take place.

  11. The digital era: the position and interests of creators and performers

    NARCIS (Netherlands)

    Akker, I.; Poort, J.; Rutten, P.; Weda, J.

    2011-01-01

    This contribution presents the results of a survey held among creators and performers in media, arts and entertainment in The Netherlands. It concerns the future of copyright in the digital age and its implications for the creative professions as perceived by those working in it. Based on cluster

  12. Rural teachers as innovative co-creators: an intentional teacher professional development strategy

    CSIR Research Space (South Africa)

    Botha, Adele

    2016-05-01

    Full Text Available The purpose of this paper is to provide insight into how rural teachers were empowered to become co-creators of innovative practices in their classrooms. The co-creation was operationalised as a merging of teachers existing knowledge...

  13. Copyright Issues for the Creators and Users of Information in the Electronic Environment.

    Science.gov (United States)

    Oakley, Robert L.

    1991-01-01

    Discusses issues that deal with the interface of copyright law and online systems. Areas of change needed to maintain the balance between users and creators of electronic information are identified, limits of the Copyright Act are explored, and it is suggested that existing copyright law can be applied to electronic information. (four references)…

  14. Multi-site risk-based project planning, optimization, sequencing, & budgeting process and tool for the integrated facility disposition project

    International Nuclear Information System (INIS)

    Nelson, J.G.; Castillo, C.; Huntsman, J.; Killoy, S.; Lucek, H.; Marks, T.C.

    2011-01-01

    Faced with the Department of Energy (DOE) Complex Transformation, National Nuclear Security Administration (NNSA) was tasked with developing an integrated plan for the decommissioning of over 400 facilities and 300 environmental remediation units, as well as the many reconfiguration and modernization projects at the Oak Ridge National Laboratory (ORNL) and Y-12 Complex. Manual scheduling of remediation activities is time-consuming and inherently introduces bias of the scheduler or organization into the process. Clearly a well-defined process, quantitative risk-based tool was needed to develop an objective, unbiased baseline sequence and schedule with a sound technical foundation for the Integrated Facility Disposition Project (IFDP). Faced with limited available data, innovation was needed to extrapolate intelligent relative data for key risk parameters based on known data elements. The IFDP Supermodel was customized and expanded to provide this capability for conceptual planning of diverse project portfolios and multiple sites. (author)

  15. To widen the action tools against the climatic change by domestic projects. Evaluation report

    International Nuclear Information System (INIS)

    Arnaud, E.; Dominicis, A. de; Leguet, B.; Leseur, A.; Perthuis, Ch. de

    2005-11-01

    In the framework of the climatic change fight, each country aims to implement tools of emissions reduction. In France, the european system of CO 2 quotas exchange, applied on the more emitted installations, covers less than 30% of the national carbon emissions. The other 70% are free of taxes. The 'climate mission' realized an evaluation of the emission reduction in the case of a new policy aiming to develop domestic projects of emission control. This report presents the study and its conclusions: the domestic projects, the possibilities of these projects in the transportation agriculture and forests and building sectors, the implementing conditions

  16. Tools and Methods for Risk Management in Multi-Site Engineering Projects

    Science.gov (United States)

    Zhou, Mingwei; Nemes, Laszlo; Reidsema, Carl; Ahmed, Ammar; Kayis, Berman

    In today's highly global business environment, engineering and manufacturing projects often involve two or more geographically dispersed units or departments, research centers or companies. This paper attempts to identify the requirements for risk management in a multi-site engineering project environment, and presents a review of the state-of-the-art tools and methods that can be used to manage risks in multi-site engineering projects. This leads to the development of a risk management roadmap, which will underpin the design and implementation of an intelligent risk mapping system.

  17. Evaluation Tool for the Application of Discovery Teaching Method in the Greek Environmental School Projects

    Science.gov (United States)

    Kalathaki, Maria

    2015-01-01

    Greek school community emphasizes on the discovery direction of teaching methodology in the school Environmental Education (EE) in order to promote Education for the Sustainable Development (ESD). In ESD school projects the used methodology is experiential teamwork for inquiry based learning. The proposed tool checks whether and how a school…

  18. A CONCEPTUAL TOOL FOR ASSESSING CLIENT PERFORMANCE IN THE CONSTRUCTION PROJECT COALITION

    Directory of Open Access Journals (Sweden)

    Gary D. Holt

    2002-01-01

    Full Text Available Due to the significant impact of client performance on overall project performance and the interdependence of participant%5C%27s performance in the construction project coalition %28i.e. clients%2C designers and constructors%29%2C there is a need to establish client performance measures. Based on data collected from in-depth interviews with nineteen UK architects and nine UK contractors%2C a generic tool for the on-going formal assessment of client performance is presented. It was found that this approach to performance assessment %28i.e. from the view point of other%2C non-client coalition participants%29 should lead to improved project relationships. Data analysis showed that in addition to %5C%27harder%5C%27 measures such as understanding of project requirements and finance%2C other%2C %5C%27softer%5C%27 measures of client performance %28e.g. attitude%29 were worthy of consideration since they determine the quality of participant relationships. It is recommended that the tool be used to promote more effective client performance and thus enhance coalition relationships%2C enabling continuous improvement. The ultimate aim is to develop similar tools for the assessment of all coalition participants based on a culture of openness and trust. Abstract in Bahasa Indonesia : assessment+tool%2C+coalition+participants%2C+client+performance%2C+perceptions%2C+performance+measures%2C+satisfaction.

  19. Formation and Assessment of a Tool to Evaluate STEM Literacy in Service-Learning Projects

    Science.gov (United States)

    Hayford, Barbara; Blomstrom, Sally; Mumpower, Lori

    2015-01-01

    The purpose of the authors' research was to create a tool to evaluate science, technology, engineering, and mathematics (STEM) literacy in service-learning projects. The researchers posited that components of service-learning, which in this case included the deliverable and reflections, are examples of fundamental STEM literacy and thus can be…

  20. On a Use Case Points Measurement Tool for Effective Project Management

    OpenAIRE

    Inoue, Katsuro; Kusumoto, Shinji; Tsuda, Michio

    2007-01-01

    Use case point (UCP) method has been proposed to estimate software development effort in early phase of software project and used in a lot of software organizations. This paper briefly describes an automatic use case measurement tool, called U-EST.

  1. Tránsformation–Flow–Value as a strategic tool in Project Production

    DEFF Research Database (Denmark)

    Bertelsen, Sven; Bonke, Sten

    2012-01-01

    The paper investigates the use of the Transformation-Flow-Value theory as a strategic tool in the development of the project production firm. When producing products such as ships, focus on value more than on cost may be the best approach, but in service industries such as construction, focus...

  2. Harmonization and development of resources and tools for Italian natural language processing within the PARLI project

    CERN Document Server

    Bosco, Cristina; Delmonte, Rodolfo; Moschitti, Alessandro; Simi, Maria

    2015-01-01

    The papers collected in this volume are selected as a sample of the progress in Natural Language Processing (NLP) performed within the Italian NLP community and especially attested by the PARLI project. PARLI (Portale per l’Accesso alle Risorse in Lingua Italiana) is a project partially funded by the Ministero Italiano per l’Università e la Ricerca (PRIN 2008) from 2008 to 2012 for monitoring and fostering the harmonic growth and coordination of the activities of Italian NLP. It was proposed by various teams of researchers working in Italian universities and research institutions. According to the spirit of the PARLI project, most of the resources and tools created within the project and here described are freely distributed and they did not terminate their life at the end of the project itself, hoping they could be a key factor in future development of computational linguistics.

  3. Affective Architecture. Film as a Sensory Transference Tool and an Intimacy Projection Environment

    DEFF Research Database (Denmark)

    Petersen, Rikke Munck; Farsø, Mads

    2016-01-01

    , with our bodies, perceive space and project space. Through an analysis of two films, it points to the medium of film as both a tool and an environment, based on Gernot Böhme’s ‘Raum leiblicher Anwesenheit (Böhme 2006). These films illustrate how the film’s picture frame becomes almost like a skin......This paper elucidates how film may offer itself as a tool for both the representation and conception of space that can strengthen an alternative, phenomenological and transcendental position in architecture. The paper underscores that the film camera can work as a kind of amplifier of how we...... and through its surface and sound projects both a site and a near-sensual experience simultaneously. The medium of film as both tool and an environment thereby supports an extended sensory-intimate reflection on outer experiences and inner sensations that – in its audio-visual and time...

  4. Integrated management tool for controls software problems, requests and project tasking at SLAC

    International Nuclear Information System (INIS)

    Rogind, D.; Allen, W.; Colocho, W.; DeContreras, G.; Gordon, J.; Pandey, P.; Shoaee, H.

    2012-01-01

    The Accelerator Directorate (AD) Instrumentation and Controls (ICD) Software (SW) Department at SLAC, with its service center model, continuously receives engineering requests to design, build and support controls for accelerator systems lab-wide. Each customer request can vary in complexity from a small software engineering change to a major enhancement. SLAC's Accelerator Improvement Projects (AIPs), along with DOE Construction projects, also contribute heavily to the work load. The various customer requests and projects, paired with the ongoing operational maintenance and problem reports, place a demand on the department that consistently exceeds the capacity of available resources. A centralized repository - comprised of all requests, project tasks, and problems - available to physicists, operators, managers, and engineers alike, is essential to capture, communicate, prioritize, assign, schedule, track, and finally, commission all work components. The Software Department has recently integrated request / project tasking into SLAC's custom online problem tracking 'Comprehensive Accelerator Tool for Enhancing Reliability' (CATER) tool. This paper discusses the newly implemented software request management tool - the workload it helps to track, its structure, features, reports, work-flow and its many usages. (authors)

  5. Consumers as co-creators of new product ideas

    DEFF Research Database (Denmark)

    Banovic, Marija; Krystallis, Athanasios; Guerrero, Luis

    2016-01-01

    development process as a firm-centred activity. This study uses projective and creative research techniques to involve consumers in the process of modification and creation of new aquaculture product ideas. We provide guidelines for the use of these techniques in the new product development process, as well...

  6. Advantages of using 3D design tools in the nuclear power plants projects

    International Nuclear Information System (INIS)

    Roldan, P.; Melendro, J.; Gomez, A.; Hermana, I.

    2011-01-01

    It there is anything that distinguished Iberdrola Ingeneria y Construccion, as part of the Iberdrola Group, it is its firm commitment to innovation and continuous improvement. This is the philosophy that led the company to its interest in three-dimensional design tools back when they were in an early stage of development : very little international implementation, lack of integration with other applications, absence of previous experiences to understand the best possible configuration for each case, etc. Nevertheless, the company was able to see the tremendous advantage of having a construction program in the early months of a project- a detailed program that could predict, and therefore avoid, the problems that, if not anticipated, would arise in the construction phase when they result in higher costs, longer timeframes and a multitude of complications. This is precisely what 3D design tools offer prediction and this has been proven in the latest combined cycle projects executed with these tools. A project executed without errors not only decreases cost and time overruns, but also necessarily increases the quality of the end result. Efficiency and quality: these are both basic goals of Iberdrola Ingenieria y Construccion. The knowledge of and skill in the use of these tools have grown at the same time that their development has reached increasingly higher levels. As a result, Iberdrola Ingenieria y Conctruccion now has extensive experience in the use of 3D design tools and is prepared for the future challenges posed by these tools, the capabilities of which have attained such heights that it is possible to take on one of the most technically challenging projects that exists a nuclear power plant. And we are ready. (Author)

  7. Final report on LDRD project: Simulation/optimization tools for system variability analysis

    Energy Technology Data Exchange (ETDEWEB)

    R. L. Bierbaum; R. F. Billau; J. E. Campbell; K. D. Marx; R. J. Sikorski; B. M. Thompson; S. D. Wix

    1999-10-01

    >This work was conducted during FY98 (Proposal Number 98-0036) and FY99 (Proposal Number 99-0818) under the auspices of the Sandia National Laboratories Laboratory-Directed Research and Development (LDRD) program. Electrical simulation typically treats a single data point in the very large input space of component properties. For electrical simulation to reach its full potential as a design tool, it must be able to address the unavoidable variability and uncertainty in component properties. Component viability is strongly related to the design margin (and reliability) of the end product. During the course of this project, both tools and methodologies were developed to enable analysis of variability in the context of electrical simulation tools. Two avenues to link relevant tools were also developed, and the resultant toolset was applied to a major component.

  8. CRITICAL RADAR: TOOL AND METHODOLOGY FOR EVALUATING CURRENT PROJECTS USING MULTIPLE VARIABLES

    Directory of Open Access Journals (Sweden)

    André M. Ferrari

    2017-06-01

    Full Text Available Many resources are invested in measurement processes of projects indicators without, however, give a clear view of which projects deserves the right attention at the right time. This paper proposes the use of statistics, through the analysis of multiple variables and their interrelationships, to give better basis to a critical assessment methodology of current projects used in a multinational mining company. The contribution of the research is to report the methodology called Critical Radar which is based on a graphical tool with simple operationalization that can support the decision making in complex environments, and has great flexibility across the different market scenarios and possible changes in companies guidelines. The tool has great potential to help evaluate current projects due to their characteristics of flexible use in different business areas; high degree of freedom for improvement; use of known market tool in its development; ease of viewing the results through charts and notes and user freedom to use any existing indicators in the company if complied with some statistical data quality characteristics.

  9. Robustness evaluation of cutting tool maintenance planning for soft ground tunneling projects

    Directory of Open Access Journals (Sweden)

    Alena Conrads

    2018-03-01

    Full Text Available Tunnel boring machines require extensive maintenance and inspection effort to provide a high availability. The cutting tools of the cutting wheel must be changed timely upon reaching a critical condition. While one possible maintenance strategy is to change tools only when it is absolutely necessary, tools can also be changed preventively to avoid further damages. Such different maintenance strategies influence the maintenance duration and the overall project performance. However, determine downtime related to a particular maintenance strategy is still a challenging task. This paper shows an analysis of the robustness to achieve the planned project performance of a maintenance strategy considering uncertainties of wear behavior of the cutting tools. A simulation based analysis is presented, implementing an empirical wear prediction model. Different strategies of maintenance planning are compared by performing a parameter variation study including Monte-Carlo simulations. The maintenance costs are calculated and evaluated with respect to their robustness. Finally, an improved and robust maintenance strategy has been determined. Keywords: Mechanized tunneling, Maintenance, Wear of cutting tools, Process simulation, Robustness, Uncertainty modeling

  10. Cost Based Value Stream Mapping as a Sustainable Construction Tool for Underground Pipeline Construction Projects

    Directory of Open Access Journals (Sweden)

    Murat Gunduz

    2017-11-01

    Full Text Available This paper deals with application of Value Stream Mapping (VSM as a sustainable construction tool on a real construction project of installation of underground pipelines. VSM was adapted to reduce the high percentage of non-value-added activities and time wastes during each construction stage and the paper searched for an effective way to consider the cost for studied construction of underground pipeline. This paper is unique in its way that it adopts cost implementation of VSM to improve the productivity in underground pipeline projects. The data was observed and collected from site during construction, indicating the cycle time, value added and non-value added of each construction stage. The current state was built based on these details. This was an eye-opening exercise and a process management tool as a trigger for improvement. After the current state assessment, a future state is attempted by Value Stream Mapping tool balancing the resources using a Line of Balance (LOB technique. Moreover, a sustainable cost estimation model was developed during current state and future state to calculate the cost of underground pipeline construction. The result shows a cost reduction of 20.8% between current and future states. This reflects the importance of the cost based Value Stream Mapping in construction as a sustainable measurement tool. This new tool could be utilized in construction industry to add the sustainability and effective cost management.

  11. Information-representation methods and tools or the Smart Swap Building strategic project

    Directory of Open Access Journals (Sweden)

    Marco Medici

    2016-06-01

    Full Text Available  Within the Smart Swap Building project for the housing renewal, the representative tool is an integrated part of the building design process and becomes an element to support complex decision-making processes, integrating different skills in different stages of the building life cycle. The use of Building Information Modeling (BIM tools not only allow a transparent design phase but covers the whole building process, relating technological and structural elements with construction scheduling (4D, cost estimation (5D, certification (6D and management of the life cycle (7D + CAFM, allowing more sustainable and aware choices.

  12. Catchment Models and Management Tools for diffuse Contaminants (Sediment, Phosphorus and Pesticides): DIFFUSE Project

    Science.gov (United States)

    Mockler, Eva; Reaney, Simeon; Mellander, Per-Erik; Wade, Andrew; Collins, Adrian; Arheimer, Berit; Bruen, Michael

    2017-04-01

    The agricultural sector is the most common suspected source of nutrient pollution in Irish rivers. However, it is also often the most difficult source to characterise due to its predominantly diffuse nature. Particulate phosphorus in surface water and dissolved phosphorus in groundwater are of particular concern in Irish water bodies. Hence the further development of models and indices to assess diffuse sources of contaminants are required for use by the Irish Environmental Protection Agency (EPA) to provide support for river basin planning. Understanding connectivity in the landscape is a vital component of characterising the source-pathway-receptor relationships for water-borne contaminants, and hence is a priority in this research. The DIFFUSE Project will focus on connectivity modelling and incorporation of connectivity into sediment, nutrient and pesticide risk mapping. The Irish approach to understanding and managing natural water bodies has developed substantially in recent years assisted by outputs from multiple research projects, including modelling and analysis tools developed during the Pathways and CatchmentTools projects. These include the Pollution Impact Potential (PIP) maps, which are an example of research output that is used by the EPA to support catchment management. The PIP maps integrate an understanding of the pollution pressures and mobilisation pathways and, using the source-pathways-receptor model, provide a scientific basis for evaluation of mitigation measures. These maps indicate the potential risk posed by nitrate and phosphate from diffuse agricultural sources to surface and groundwater receptors and delineate critical source areas (CSAs) as a means of facilitating the targeting of mitigation measures. Building on this previous research, the DIFFUSE Project will develop revised and new catchment managements tools focused on connectivity, sediment, phosphorus and pesticides. The DIFFUSE project will strive to identify the state

  13. Identification of Tools and Techniques to Enhance Interdisciplinary Collaboration During Design and Construction Projects.

    Science.gov (United States)

    Keys, Yolanda; Silverman, Susan R; Evans, Jennie

    2017-10-01

    The purpose of this study was to collect the perceptions of design professionals and clinicians regarding design process success strategies and elements of interprofessional engagement and communication during healthcare design and construction projects. Additional objectives were to gather best practices to maximize clinician engagement and provide tools and techniques to improve interdisciplinary collaboration for future projects. Strategies are needed to enhance the design and construction process and create interactions that benefit not only the project but the individuals working to see its completion. Meaningful interprofessional collaboration is essential to any healthcare design project and making sure the various players communicate is a critical element. This was a qualitative study conducted via an online survey. Respondents included architects, construction managers, interior designers, and healthcare personnel who had recently been involved in a building renovation or new construction project for a healthcare facility. Responses to open-ended questions were analyzed for themes, and descriptive statistics were used to provide insight into participant demographics. Information on the impressions, perceptions, and opportunities related to clinician involvement in design projects was collected from nurses, architects, interior designers, and construction managers. Qualitative analysis revealed themes of clinician input, organizational dynamics, and a variety of communication strategies to be the most frequently mentioned elements of successful interprofessional collaboration. This study validates the need to include clinician input in the design process, to consider the importance of organizational dynamics on design team functioning, and to incorporate effective communication strategies during design and construction projects.

  14. Recursive engagement: the public as data analysts and outreach creators

    CERN Document Server

    Kalderon, Charles William; The ATLAS collaboration

    2018-01-01

    Two recent outreach projects are making use of public communities to enhance and build upon the first phases setup by physicists. “HiggsHunters” asked the public to search for displaced vertices in event displays, during which time a pool of trusted members arose in the associated discussion. The data this generated is now being analysed by schoolchildren, through which they can both learn the principles of scientific research and contribute directly to it. Also involving schoolchildren is “ATLAScraft”, a recreation of ATLAS and the wider CERN complex in minecraft. Here, the basic layout was provided, but students subsequently researched and created their own mini-games to explain various aspects of the LHC and detector physics to others. [NB: 15 minutes talk plus 2 minutes of questions

  15. [A pharmacist, creator of the first French daily paper: Cadet de Vaux].

    Science.gov (United States)

    Cailhol, C; Flahaut, J

    1998-01-01

    Cadet de Vaux, in partnership with Louis Dussieux and Olivier de Carancez, was the creator of the first French daily news paper, on the 1st of January 1877. Cadet had the responsibility of the scientific section. Several lampoons were written against the three directors of the paper. The paper was momentarily suppressed two times, because of non convenient contributions, and it was stopped his activities in the paper.

  16. Aberration measurement of projection optics in lithographic tools based on two-beam interference theory

    International Nuclear Information System (INIS)

    Ma Mingying; Wang Xiangzhao; Wang Fan

    2006-01-01

    The degradation of image quality caused by aberrations of projection optics in lithographic tools is a serious problem in optical lithography. We propose what we believe to be a novel technique for measuring aberrations of projection optics based on two-beam interference theory. By utilizing the partial coherent imaging theory, a novel model that accurately characterizes the relative image displacement of a fine grating pattern to a large pattern induced by aberrations is derived. Both even and odd aberrations are extracted independently from the relative image displacements of the printed patterns by two-beam interference imaging of the zeroth and positive first orders. The simulation results show that by using this technique we can measure the aberrations present in the lithographic tool with higher accuracy

  17. Aberration measurement of projection optics in lithographic tools based on two-beam interference theory.

    Science.gov (United States)

    Ma, Mingying; Wang, Xiangzhao; Wang, Fan

    2006-11-10

    The degradation of image quality caused by aberrations of projection optics in lithographic tools is a serious problem in optical lithography. We propose what we believe to be a novel technique for measuring aberrations of projection optics based on two-beam interference theory. By utilizing the partial coherent imaging theory, a novel model that accurately characterizes the relative image displacement of a fine grating pattern to a large pattern induced by aberrations is derived. Both even and odd aberrations are extracted independently from the relative image displacements of the printed patterns by two-beam interference imaging of the zeroth and positive first orders. The simulation results show that by using this technique we can measure the aberrations present in the lithographic tool with higher accuracy.

  18. Carbon Footprint Estimation Tool for Residential Buildings for Non-Specialized Users: OERCO2 Project

    Directory of Open Access Journals (Sweden)

    Jaime Solís-Guzmán

    2018-04-01

    Full Text Available Existing tools for environmental certification of buildings are failing in their ability to reach the general public and to create social awareness, since they require not only specialized knowledge regarding construction and energy sources, but also environmental knowledge. In this paper, an open-source online tool for the estimation of the carbon footprint of residential buildings by non-specialized users is presented as a product from the OERCO2 Erasmus + project. The internal calculations, data management and operation of this tool are extensively explained. The ten most common building typologies built in the last decade in Spain are analysed by using the OERCO2 tool, and the order of magnitude of the results is analysed by comparing them to the ranges determined by other authors. The OERCO2 tool proves itself to be reliable, with its results falling within the defined logical value ranges. Moreover, the major simplification of the interface allows non-specialized users to evaluate the sustainability of buildings. Further research is oriented towards its inclusion in other environmental certification tools and in Building Information Modeling (BIM environments.

  19. Development of a virtual tool for learning basic organisation and planning in rural engineering projects

    Science.gov (United States)

    Redel-Macías, María Dolores; Castillo, Carlos; Aguilar Porro, Cristina; Polo, María; Taguas, Encarnación V.

    2014-09-01

    This paper presents a virtual lab for the contents of an Engineering project, for designing an agro-industrial building, which is also useful for a range of different transversal courses in Engineering sciences. The aims of this tool are to analyse the most important contents of a project-document (calculation, regulations, drawings and budgets), as well as their relationship with the activities which make up the work and the schedule. The design criteria we considered were: its online applications and their compatibility with Moodle; the inclusion of different learning approaches, such as exploratory learning and inquiry-based learning; its interactivity, and the use of multimedia elements for visualisation and direct analysis on material common to Engineering subjects. The students' perceptions of the improvements brought by the virtual lab were analysed statistically through a series of questions over two academic years. The results of the questionnaires suggested that most of those who had used the e-learning tool valued positively its overall suitability for reaching the objectives in their subject as well as the way it improved the working methodology. The practical knowledge acquired by the students was also highly valued. In addition, the lack of constraints commonly related to field trips (expenses, time and complexity) illustrates the utility of self-access learning tools in key transversal disciplines such as Engineering projects.

  20. Critical chain project management and drum-buffer-rope tools integration in construction industry - case study

    Directory of Open Access Journals (Sweden)

    Piotr Cyplik

    2012-03-01

    Full Text Available Background: The concept of integrating the theory of constraints tools in reorganizing management system in a mechanical engineering company was presented in this article. The main aim of the concept is to enable the enterprise to satisfy the customers' expectations at reasonable costs, which allows for making a profit and creating an agile enterprise in the long run. Methods: Due to the individual character of the production process and service process in analyzed company, the described concept using theory of constraints project management (CCPM and manufacturing (DBR tools. The authors use performance levels conception to build an integration tool focused on the interaction and collaboration between different departments. The integration tool has been developed and verified in Polish manufacturing company. Results: In described model a tool compatible with CCPM operates on the level of the customer service process. Shop floor is controlled based on the DBR method. The authors hold that the integration of between TOC tools is of key importance. The integration of TOC tools dedicated to managing customer service and shop floor scheduling and controlling requires developing a mechanism for repeated transmitting the information between them. This mechanism has been developed. Conclusions: The conducted research showed that the developed tool integrating CCPM and DBR had a positive impact on the enterprise performance. It enables improving the company performance in meeting target group requirements by focusing on enhancing the efficiency of processes running in the company and tasks processed at particular work stations. The described model has been successfully implemented in one of the Polish mechanical engineering companies.

  1. Developing a research and practice tool to measure walkability: a demonstration project.

    Science.gov (United States)

    Giles-Corti, Billie; Macaulay, Gus; Middleton, Nick; Boruff, Bryan; Bull, Fiona; Butterworth, Iain; Badland, Hannah; Mavoa, Suzanne; Roberts, Rebecca; Christian, Hayley

    2014-12-01

    Growing evidence shows that higher-density, mixed-use, pedestrian-friendly neighbourhoods encourage active transport, including transport-related walking. Despite widespread recognition of the benefits of creating more walkable neighbourhoods, there remains a gap between the rhetoric of the need for walkability and the creation of walkable neighbourhoods. Moreover, there is little objective data to benchmark the walkability of neighbourhoods within and between Australian cities in order to monitor planning and design intervention progress and to assess built environment and urban policy interventions required to achieve increased walkability. This paper describes a demonstration project that aimed to develop, trial and validate a 'Walkability Index Tool' that could be used by policy makers and practitioners to assess the walkability of local areas; or by researchers to access geospatial data assessing walkability. The overall aim of the project was to develop an automated geospatial tool capable of creating walkability indices for neighbourhoods at user-specified scales. The tool is based on open-source software architecture, within the Australian Urban Research Infrastructure Network (AURIN) framework, and incorporates key sub-component spatial measures of walkability (street connectivity, density and land use mix). Using state-based data, we demonstrated it was possible to create an automated walkability index. However, due to the lack of availability of consistent of national data measuring land use mix, at this stage it has not been possible to create a national walkability measure. The next stage of the project is to increase useability of the tool within the AURIN portal and to explore options for alternative spatial data sources that will enable the development of a valid national walkability index. AURIN's open-source Walkability Index Tool is a first step in demonstrating the potential benefit of a tool that could measure walkability across Australia. It

  2. The Design and Development of a Computerized Tool Support for Conducting Senior Projects in Software Engineering Education

    Science.gov (United States)

    Chen, Chung-Yang; Teng, Kao-Chiuan

    2011-01-01

    This paper presents a computerized tool support, the Meetings-Flow Project Collaboration System (MFS), for designing, directing and sustaining the collaborative teamwork required in senior projects in software engineering (SE) education. Among many schools' SE curricula, senior projects serve as a capstone course that provides comprehensive…

  3. Fast in-situ tool inspection based on inverse fringe projection and compact sensor heads

    Science.gov (United States)

    Matthias, Steffen; Kästner, Markus; Reithmeier, Eduard

    2016-11-01

    Inspection of machine elements is an important task in production processes in order to ensure the quality of produced parts and to gather feedback for the continuous improvement process. A new measuring system is presented, which is capable of performing the inspection of critical tool geometries, such as gearing elements, inside the forming machine. To meet the constraints on sensor head size and inspection time imposed by the limited space inside the machine and the cycle time of the process, the measuring device employs a combination of endoscopy techniques with the fringe projection principle. Compact gradient index lenses enable a compact design of the sensor head, which is connected to a CMOS camera and a flexible micro-mirror based projector via flexible fiber bundles. Using common fringe projection patterns, the system achieves measuring times of less than five seconds. To further reduce the time required for inspection, the generation of inverse fringe projection patterns has been implemented for the system. Inverse fringe projection speeds up the inspection process by employing object-adapted patterns, which enable the detection of geometry deviations in a single image. Two different approaches to generate object adapted patterns are presented. The first approach uses a reference measurement of a manufactured tool master to generate the inverse pattern. The second approach is based on a virtual master geometry in the form of a CAD file and a ray-tracing model of the measuring system. Virtual modeling of the measuring device and inspection setup allows for geometric tolerancing for free-form surfaces by the tool designer in the CAD-file. A new approach is presented, which uses virtual tolerance specifications and additional simulation steps to enable fast checking of metric tolerances. Following the description of the pattern generation process, the image processing steps required for inspection are demonstrated on captures of gearing geometries.

  4. SOCIAL PROJECT IN FOREIGN LANGUAGE TEACHING AS A TOOL FOR EFFECTIVE MOTIVATION

    Directory of Open Access Journals (Sweden)

    Юлия Леонидовна Гончарова

    2013-09-01

    Full Text Available Subject and purpose of the researchThis paper describes an experiment on the use of social projects as a kind of extra-curricular collaboration in order to increase students' motivation to learn English, to overcome the psychological barrier of communication in a foreign language, and for the purpose of evaluating the skills of independent learning in the process of solving practical problems or tasks.Design of the experimentThe origin of the problem and the development of learning and cognitive activity during the preparation of students for the project is being described; the expected positive result and the organizational algorithm of the project are proposed.Progress and findingsA phased description of the work of students with emphasis on unexpected and interesting findings is presented; an evaluation system of the individual contribution of each of the students on the project and the ability to work on a team is offered.Practical implicationsConclusions are made about the relevance of the use of group projects in teaching foreign languages as an effective tool to stimulate learning motivation and overcoming socio-psychological and communication problems within the training group and the community as a whole.DOI: http://dx.doi.org/10.12731/2218-7405-2013-6-44

  5. Risk management tools from the traditional energy industry to wind energy projects

    International Nuclear Information System (INIS)

    Randall, G.; Marks, R.

    2010-01-01

    Risk-based analysis techniques are used to quantify and prioritize a wide variety of problems within the traditional fossil fuel and nuclear power industries. This poster presentation evaluated some of the risk analysis tools and methods used by the energy industry to quantify and manage wind energy development risks. A comprehensive risk-based approach for identifying the probability and consequences of potential concerns was presented for a sample wind energy project. The process determined objectives in relation to the project's net present value. Contributing domains included the energy production, prices, and operating costs of the project. Decision criteria used to evaluate the desirability of the wind project were then developed. Monte Carlo simulations were the used to aggregate individual risks into an overall total. The contribution of each element to the decision objective was calculated separately. The element outputs were than combined into a measure of aggregate risk exposure. Aggregate results were used to calculate the decision criteria. The decision objective was to determine if the energy cost was less than the avoided cost of other project options. The study showed that the approach can allow decision-makers to mitigate risks. However, the results are dependent on the quality of the input data. tabs., figs.

  6. Using implementation tools to design and conduct quality improvement projects for faster and more effective improvement.

    Science.gov (United States)

    Ovretveit, John; Mittman, Brian; Rubenstein, Lisa; Ganz, David A

    2017-10-09

    Purpose The purpose of this paper is to enable improvers to use recent knowledge from implementation science to carry out improvement changes more effectively. It also highlights the importance of converting research findings into practical tools and guidance for improvers so as to make research easier to apply in practice. Design/methodology/approach This study provides an illustration of how a quality improvement (QI) team project can make use of recent findings from implementation research so as to make their improvement changes more effective and sustainable. The guidance is based on a review and synthesis of improvement and implementation methods. Findings The paper illustrates how research can help a quality project team in the phases of problem definition and preparation, in design and planning, in implementation, and in sustaining and spreading a QI. Examples of the use of different ideas and methods are cited where they exist. Research limitations/implications The example is illustrative and there is little limited experimental evidence of whether using all the steps and tools in the one approach proposed do enable a quality team to be more effective. Evidence supporting individual guidance proposals is cited where it exists. Practical implications If the steps proposed and illustrated in the paper were followed, it is possible that quality projects could avoid waste by ensuring the conditions they need for success are in place, and sustain and spread improvement changes more effectively. Social implications More patients could benefit more quickly from more effective implementation of proven interventions. Originality/value The paper is the first to describe how improvement and implementation science can be combined in a tangible way that practical improvers can use in their projects. It shows how QI project teams can take advantage of recent advances in improvement and implementation science to make their work more effective and sustainable.

  7. Application of Project Time Management Tools and Techniques to the Construction Industry in the Gaza Strip

    Directory of Open Access Journals (Sweden)

    Nabil Sawalhi

    2012-11-01

    Full Text Available The objective of this paper is to investigate the level of applying theproject time management tools and techniques by public ownersand construction contractors in the Gaza Strip. This study hasbeen conducted by means of a survey questionnaire. Seventythreequestionnaires were distributed to target constructioncontractors and twenty-five questionnaires to public owners. Sixtycompleted questionnaires from contractors and twenty-threequestionnaires from public owners were received and analysed.The survey results indicated that contemporary project timemanagement tools and techniques are not widely used amonglocal contractors and owners. Lack of subcontractor’s knowledgeand awareness of the importance of project time managementtools and techniques are still major obstacles toward the efficientutilisation of such tools. This study recommended that there is anurgent need to establish a professional industry body such as anInstitute of Building to review and evaluate existing local projectmanagement practices. This professional body may be establishedby the government through the Ministry of Housing and PublicWorks or by the local university in cooperation with a similarinternational professional industry body. Current training effortshould be tailored to encourage owners and contractors to usework breakdown structures, resource optimisation, and networkscheduling.

  8. Developing tools for the safety specification in risk management plans: lessons learned from a pilot project.

    Science.gov (United States)

    Cooper, Andrew J P; Lettis, Sally; Chapman, Charlotte L; Evans, Stephen J W; Waller, Patrick C; Shakir, Saad; Payvandi, Nassrin; Murray, Alison B

    2008-05-01

    Following the adoption of the ICH E2E guideline, risk management plans (RMP) defining the cumulative safety experience and identifying limitations in safety information are now required for marketing authorisation applications (MAA). A collaborative research project was conducted to gain experience with tools for presenting and evaluating data in the safety specification. This paper presents those tools found to be useful and the lessons learned from their use. Archive data from a successful MAA were utilised. Methods were assessed for demonstrating the extent of clinical safety experience, evaluating the sensitivity of the clinical trial data to detect treatment differences and identifying safety signals from adverse event and laboratory data to define the extent of safety knowledge with the drug. The extent of clinical safety experience was demonstrated by plots of patient exposure over time. Adverse event data were presented using dot plots, which display the percentages of patients with the events of interest, the odds ratio, and 95% confidence interval. Power and confidence interval plots were utilised for evaluating the sensitivity of the clinical database to detect treatment differences. Box and whisker plots were used to display laboratory data. This project enabled us to identify new evidence-based methods for presenting and evaluating clinical safety data. These methods represent an advance in the way safety data from clinical trials can be analysed and presented. This project emphasises the importance of early and comprehensive planning of the safety package, including evaluation of the use of epidemiology data.

  9. Parameter calculation tool for the application of radiological dose projection codes

    International Nuclear Information System (INIS)

    Galindo G, I. F.; Vergara del C, J. A.; Galvan A, S. J.; Tijerina S, F.

    2016-09-01

    The use of specialized codes to estimate the radiation dose projection to an emergency postulated event at a nuclear power plant requires that certain plant data be available according to the event being simulated. The calculation of the possible radiological release is the critical activity to carry out the emergency actions. However, not all of the plant data required are obtained directly from the plant but need to be calculated. In this paper we present a computational tool that calculates the plant data required to use the radiological dose estimation codes. The tool provides the required information when there is a gas emergency venting event in the primary containment atmosphere, whether well or dry well and also calculates the time in which the spent fuel pool would be discovered in the event of a leak of water on some of the walls or floor of the pool. The tool developed has mathematical models for the processes involved such as: compressible flow in pipes considering area change and for constant area, taking into account the effects of friction and for the case of the spent fuel pool hydraulic models to calculate the time in which a container is emptied. The models implemented in the tool are validated with data from the literature for simulated cases. The results with the tool are very similar to those of reference. This tool will also be very supportive so that in postulated emergency cases can use the radiological dose estimation codes to adequately and efficiently determine the actions to be taken in a way that affects as little as possible. (Author)

  10. Mapping data through concept maps: an auxiliary tool for decision making regarding institutional projects

    International Nuclear Information System (INIS)

    D’Avila, Adriana L.

    2017-01-01

    This paper reports a data mapping construction aimed to subsidize the decision making process regarding institutional projects, at different levels of responsibility, at the Instituto de Engenharia Nuclear. The conception models a systemic and adaptive tool which is based on the concept mapping theory developed by Novak. The Instituto de Engenharia Nuclear (IEN) is a research center of the Comissão de Energia Nuclear (CNEN), an autarchy attached to Ministério da Ciência, Tecnologia, Inovações e Comunicações. The main focus of IEN is research and development of nuclear science and technology. The developed tool creates a more effective and accessible way of sharing information. However, beyond project data integration into a specific instrument, it also has the intent to compensate the consequences of the continued reduction of the number of workers at IEN over recent years. The recent CNEN management report, published in 2016, showed the problematic situation caused by the loss of workers, stressing the high number of pensions granted and to be granted in the near future. The loss of labor force, besides exposing the urgent need for optimizing knowledge management efforts, also sheds light into another problem: the need for grouping responsibilities among the remaining workers. In this respect, the tool developed helps to face this challenge, enhancing autonomy at different levels but preserving the institutional guidelines. To conclude the report, and in order to exemplify the method, the paper also describes the map construction relative an innovative project proposal in a joint development towards the nuclear area. (author)

  11. Mapping data through concept maps: an auxiliary tool for decision making regarding institutional projects

    Energy Technology Data Exchange (ETDEWEB)

    D’Avila, Adriana L., E-mail: adriana@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Divisão de Engenharia Nuclear

    2017-11-01

    This paper reports a data mapping construction aimed to subsidize the decision making process regarding institutional projects, at different levels of responsibility, at the Instituto de Engenharia Nuclear. The conception models a systemic and adaptive tool which is based on the concept mapping theory developed by Novak. The Instituto de Engenharia Nuclear (IEN) is a research center of the Comissão de Energia Nuclear (CNEN), an autarchy attached to Ministério da Ciência, Tecnologia, Inovações e Comunicações. The main focus of IEN is research and development of nuclear science and technology. The developed tool creates a more effective and accessible way of sharing information. However, beyond project data integration into a specific instrument, it also has the intent to compensate the consequences of the continued reduction of the number of workers at IEN over recent years. The recent CNEN management report, published in 2016, showed the problematic situation caused by the loss of workers, stressing the high number of pensions granted and to be granted in the near future. The loss of labor force, besides exposing the urgent need for optimizing knowledge management efforts, also sheds light into another problem: the need for grouping responsibilities among the remaining workers. In this respect, the tool developed helps to face this challenge, enhancing autonomy at different levels but preserving the institutional guidelines. To conclude the report, and in order to exemplify the method, the paper also describes the map construction relative an innovative project proposal in a joint development towards the nuclear area. (author)

  12. Idea: an integrated set of tools for sustainable nuclear decommissioning projects

    International Nuclear Information System (INIS)

    Detilleux, M.; Centner, B.; Vanderperre, S.; Wacquier, W.

    2008-01-01

    Decommissioning of nuclear installations constitutes an important challenge and shall prove to the public that the whole nuclear life cycle is fully mastered by the nuclear industry. This could lead to an easier public acceptance of the construction of new nuclear power plants. When ceasing operation, nuclear installations owners and operators are looking for solutions in order to assess and keep decommissioning costs at a reasonable level, to fully characterise waste streams (in particular radiological inventories of difficult-to-measure radionuclides) and to reduce personnel exposure during the decommissioning activities taking into account several project, site and country specific constraints. In response to this need, Tractebel Engineering has developed IDEA (Integrated DEcommissioning Application), an integrated set of computer tools, to support the engineering activities to be carried out in the frame of a decommissioning project. IDEA provides optimized solutions from an economical, environmental, social and safety perspective. (authors)

  13. The radioecological sensitivity of territories: towards an operational tool through the SENSIB Project

    International Nuclear Information System (INIS)

    Mercat-Rommens, C.; Roussel-Debet, S.; Briand, B.; Durand, V.; Besson, B.; Renaud, P.

    2007-01-01

    Radioecological sensitivity represents the intensity of a region's global reaction to an accidental or chronic radioactive pollution. The prospects for an operational application of this concept are investigated by I.R.S.N. within the framework of the S.E.N.S.I.B. project. The first aim of S.E.N.S.I.B. is to represent globally the territorial consequences of a situation of radioactive contamination, which requires to collect and to investigate the radioecological and contextual data. For this purpose, varied innovative methods of knowledge treatment are investigated. The second objective is to elaborate a management tool of this knowledge which could be shared by various stake holders (authorities, population, experts), and that is envisaged by the application of supporting methods to decision-making. The strategy, the preliminary results and the avenues of research of the project S.E.N.S.I.B. are briefly presented. (authors)

  14. The use of student-driven video projects as an educational and outreach tool

    Science.gov (United States)

    Bamzai, A.; Farrell, W.; Klemm, T.

    2014-12-01

    With recent technological advances, the barriers to filmmaking have been lowered, and it is now possible to record and edit video footage with a smartphone or a handheld camera and free software. Students accustomed to documenting their every-day experiences for multimedia-rich social networking sites feel excited and creatively inspired when asked to take on ownership of more complex video projects. With a small amount of guidance on shooting primary and secondary footage and an overview of basic interview skills, students are self-motivated to identify the learning themes with which they resonate most strongly and record their footage in a way that is true to their own experience. The South Central Climate Science Center (SC-CSC) is one of eight regional centers formed by the U.S. Department of the Interior in order to provide decision makers with the science, tools, and information they need to address the impacts of climate variability and change on their areas of responsibility. An important component of this mission is to innovate in the areas of translational science and science communication. This presentation will highlight how the SC-CSC used student-driven video projects to document our Early Career Researcher Workshop and our Undergraduate Internship for Underrepresented Minorities. These projects equipped the students with critical thinking and project management skills, while also providing a finished product that the SC-CSC can use for future outreach purposes.

  15. [The virtual reality simulation research of China Mechanical Virtual Human based on the Creator/Vega].

    Science.gov (United States)

    Wei, Gaofeng; Tang, Gang; Fu, Zengliang; Sun, Qiuming; Tian, Feng

    2010-10-01

    The China Mechanical Virtual Human (CMVH) is a human musculoskeletal biomechanical simulation platform based on China Visible Human slice images; it has great realistic application significance. In this paper is introduced the construction method of CMVH 3D models. Then a simulation system solution based on Creator/Vega is put forward for the complex and gigantic data characteristics of the 3D models. At last, combined with MFC technology, the CMVH simulation system is developed and a running simulation scene is given. This paper provides a new way for the virtual reality application of CMVH.

  16. MsLDR-creator: a web service to design msLDR assays.

    Science.gov (United States)

    Bormann, Felix; Dahl, Andreas; Sers, Christine

    2012-03-01

    MsLDR-creator is a free web service to design assays for the new DNA methylation detection method msLDR. The service provides the user with all necessary information about the oligonucleotides required for the measurement of a given CpG within a sequence of interest. The parameters are calculated by the nearest neighbour approach to achieve optimal behaviour during the experimental procedure. In addition, to guarantee a good start using msLDR, further information, like protocols and hints and tricks, are provided.

  17. Space diffuses multiobjective analysis: A tool to locate lineal projects with a focus of environmental management

    International Nuclear Information System (INIS)

    Patricia Jaramillo A Liliana Vinasco T

    2005-01-01

    This paper presents a methodological proposal that is developed to identify corridors for lineal projects (highways, transmission lines, pipelines, etc), with environmental management criteria, when there is not complete information about the area of influence of the project, or some of the information is imprecise. Also a computational module is developed that allow the use of the methodological proposal. The proposal is based in the fuzzy multiobjective analysis concept, which takes elements of the diffuse logic and the traditional Multiobjective Analysis; the first one, it conserves its properties with imprecise information and of the second allows, the minimization of multiple objective correspond to the least environmental the physical, biological, cultural, economical and political dimensions of the environment uses the Geographic Information SIG this proposal is being constituted a complete tool for taking decisions in which space attributed is included. The FMA is a recent technique that is in development [S integration to GIS is stiller. The proposal is a contribution to the construction of a conceptual scheme for future applications in this aspects constitute a tool for the environmental planning which decreasing the risks, future cost analysis of natural resources and human group

  18. Data integration through brain atlasing: Human Brain Project tools and strategies.

    Science.gov (United States)

    Bjerke, Ingvild E; Øvsthus, Martin; Papp, Eszter A; Yates, Sharon C; Silvestri, Ludovico; Fiorilli, Julien; Pennartz, Cyriel M A; Pavone, Francesco S; Puchades, Maja A; Leergaard, Trygve B; Bjaalie, Jan G

    2018-04-01

    The Human Brain Project (HBP), an EU Flagship Initiative, is currently building an infrastructure that will allow integration of large amounts of heterogeneous neuroscience data. The ultimate goal of the project is to develop a unified multi-level understanding of the brain and its diseases, and beyond this to emulate the computational capabilities of the brain. Reference atlases of the brain are one of the key components in this infrastructure. Based on a new generation of three-dimensional (3D) reference atlases, new solutions for analyzing and integrating brain data are being developed. HBP will build services for spatial query and analysis of brain data comparable to current online services for geospatial data. The services will provide interactive access to a wide range of data types that have information about anatomical location tied to them. The 3D volumetric nature of the brain, however, introduces a new level of complexity that requires a range of tools for making use of and interacting with the atlases. With such new tools, neuroscience research groups will be able to connect their data to atlas space, share their data through online data systems, and search and find other relevant data through the same systems. This new approach partly replaces earlier attempts to organize research data based only on a set of semantic terminologies describing the brain and its subdivisions. Copyright © 2018 The Authors. Published by Elsevier Masson SAS.. All rights reserved.

  19. ePORT, NASA's Computer Database Program for System Safety Risk Management Oversight (Electronic Project Online Risk Tool)

    Science.gov (United States)

    Johnson, Paul W.

    2008-01-01

    ePORT (electronic Project Online Risk Tool) provides a systematic approach to using an electronic database program to manage a program/project risk management processes. This presentation will briefly cover the standard risk management procedures, then thoroughly cover NASA's Risk Management tool called ePORT. This electronic Project Online Risk Tool (ePORT) is a web-based risk management program that provides a common framework to capture and manage risks, independent of a programs/projects size and budget. It is used to thoroughly cover the risk management paradigm providing standardized evaluation criterion for common management reporting, ePORT improves Product Line, Center and Corporate Management insight, simplifies program/project manager reporting, and maintains an archive of data for historical reference.

  20. A Model-Driven Visualization Tool for Use with Model-Based Systems Engineering Projects

    Science.gov (United States)

    Trase, Kathryn; Fink, Eric

    2014-01-01

    Model-Based Systems Engineering (MBSE) promotes increased consistency between a system's design and its design documentation through the use of an object-oriented system model. The creation of this system model facilitates data presentation by providing a mechanism from which information can be extracted by automated manipulation of model content. Existing MBSE tools enable model creation, but are often too complex for the unfamiliar model viewer to easily use. These tools do not yet provide many opportunities for easing into the development and use of a system model when system design documentation already exists. This study creates a Systems Modeling Language (SysML) Document Traceability Framework (SDTF) for integrating design documentation with a system model, and develops an Interactive Visualization Engine for SysML Tools (InVEST), that exports consistent, clear, and concise views of SysML model data. These exported views are each meaningful to a variety of project stakeholders with differing subjects of concern and depth of technical involvement. InVEST allows a model user to generate multiple views and reports from a MBSE model, including wiki pages and interactive visualizations of data. System data can also be filtered to present only the information relevant to the particular stakeholder, resulting in a view that is both consistent with the larger system model and other model views. Viewing the relationships between system artifacts and documentation, and filtering through data to see specialized views improves the value of the system as a whole, as data becomes information

  1. TARZAN: A REMOTE TOOL DEPLOYMENT SYSTEM FOR THE WEST VALLEY DEVELOPMENT PROJECT

    International Nuclear Information System (INIS)

    Thompson, Bruce R.; Veri, James

    1999-01-01

    RedZone Robotics, Inc. undertook a development project to build Tarzan, a Remote Tool Delivery system to work inside nuclear waste storage tanks 8D-1 and 8D-2 at the West Valley Demonstration Project (WVDP). The removal of waste deposits from large storage tanks poses significant challenges during tank operations and closure. Limited access, the presence of chemical, radiological, and /or explosive hazards, and the need to deliver retrieval equipment to all regions of the tank exceed the capabilities of most conventional methods and equipment. Remotely operated devices for mobilizing and retrieving waste materials are needed. Some recent developments have been made in this area. However, none of these developments completely and cost-effectively address tanks that are congested with internal structures (e.g., support columns, cooling coils, fixed piping, etc.). The Tarzan system consists of the following parts: Locomotor which is deployed in the tank for inspection and cleanup; Hydraulic power unit providing system power for the locomotor and deployment unit; and Control system providing the man machine interface to control, coordinate and monitor the system. This document presents the final report on the Tarzan project

  2. A tool to assess sex-gender when selecting health research projects.

    Science.gov (United States)

    Tomás, Concepción; Yago, Teresa; Eguiluz, Mercedes; Samitier, M A Luisa; Oliveros, Teresa; Palacios, Gemma

    2015-04-01

    To validate the questionnaire "Gender Perspective in Health Research" (GPIHR) to assess the inclusion of gender perspective in research projects. Validation study in two stages. Feasibility was analysed in the first, and reliability, internal consistence and validity in the second. Aragón Institute of Health Science, Aragón, Spain. GPIHR was applied to 118 research projects funded in national and international competitive tenders from 2003 to 2012. Analysis of inter- and intra-observer reliability with Kappa index and internal consistency with Cronbach's alpha. Content validity analysed through literature review and construct validity with an exploratory factor analysis. Validated GPIHR has 10 questions: 3 in the introduction, 1 for objectives, 3 for methodology and 3 for research purpose. Average time of application was 13min Inter-observer reliability (Kappa) varied between 0.35 and 0.94 and intra-observer between 0.40 and 0.94. Theoretical construct is supported in the literature. Factor analysis identifies three levels of GP inclusion: "difference by sex", "gender sensitive" and "feminist research" with an internal consistency of 0.64, 0.87 and 0.81, respectively, which explain 74.78% of variance. GPIHR questionnaire is a valid tool to assess GP and useful for those researchers who would like to include GP in their projects. Copyright © 2014 Elsevier España, S.L.U. All rights reserved.

  3. Hanford River Protection Project Life cycle Cost Modeling Tool to Enhance Mission Planning - 13396

    International Nuclear Information System (INIS)

    Dunford, Gary; Williams, David; Smith, Rick

    2013-01-01

    The Life cycle Cost Model (LCM) Tool is an overall systems model that incorporates budget, and schedule impacts for the entire life cycle of the River Protection Project (RPP) mission, and is replacing the Hanford Tank Waste Operations Simulator (HTWOS) model as the foundation of the RPP system planning process. Currently, the DOE frequently requests HTWOS simulations of alternative technical and programmatic strategies for completing the RPP mission. Analysis of technical and programmatic changes can be performed with HTWOS; however, life cycle costs and schedules were previously generated by manual transfer of time-based data from HTWOS to Primavera P6. The LCM Tool automates the preparation of life cycle costs and schedules and is needed to provide timely turnaround capability for RPP mission alternative analyses. LCM is the simulation component of the LCM Tool. The simulation component is a replacement of the HTWOS model with new capability to support life cycle cost modeling. It is currently deployed in G22, but has been designed to work in any full object-oriented language with an extensive feature set focused on networking and cross-platform compatibility. The LCM retains existing HTWOS functionality needed to support system planning and alternatives studies going forward. In addition, it incorporates new functionality, coding improvements that streamline programming and model maintenance, and capability to input/export data to/from the LCM using the LCM Database (LCMDB). The LCM Cost/Schedule (LCMCS) contains cost and schedule data and logic. The LCMCS is used to generate life cycle costs and schedules for waste retrieval and processing scenarios. It uses time-based output data from the LCM to produce the logic ties in Primavera P6 necessary for shifting activities. The LCM Tool is evolving to address the needs of decision makers who want to understand the broad spectrum of risks facing complex organizations like DOE-RPP to understand how near

  4. Hanford River Protection Project Life cycle Cost Modeling Tool to Enhance Mission Planning - 13396

    Energy Technology Data Exchange (ETDEWEB)

    Dunford, Gary [AEM Consulting, LLC, 1201 Jadwin Avenue, Richland, WA 99352 (United States); Williams, David [WIT, Inc., 11173 Oak Fern Court, San Diego, CA 92131 (United States); Smith, Rick [Knowledge Systems Design, Inc., 13595 Quaker Hill Cross Rd, Nevada City, CA 95959 (United States)

    2013-07-01

    The Life cycle Cost Model (LCM) Tool is an overall systems model that incorporates budget, and schedule impacts for the entire life cycle of the River Protection Project (RPP) mission, and is replacing the Hanford Tank Waste Operations Simulator (HTWOS) model as the foundation of the RPP system planning process. Currently, the DOE frequently requests HTWOS simulations of alternative technical and programmatic strategies for completing the RPP mission. Analysis of technical and programmatic changes can be performed with HTWOS; however, life cycle costs and schedules were previously generated by manual transfer of time-based data from HTWOS to Primavera P6. The LCM Tool automates the preparation of life cycle costs and schedules and is needed to provide timely turnaround capability for RPP mission alternative analyses. LCM is the simulation component of the LCM Tool. The simulation component is a replacement of the HTWOS model with new capability to support life cycle cost modeling. It is currently deployed in G22, but has been designed to work in any full object-oriented language with an extensive feature set focused on networking and cross-platform compatibility. The LCM retains existing HTWOS functionality needed to support system planning and alternatives studies going forward. In addition, it incorporates new functionality, coding improvements that streamline programming and model maintenance, and capability to input/export data to/from the LCM using the LCM Database (LCMDB). The LCM Cost/Schedule (LCMCS) contains cost and schedule data and logic. The LCMCS is used to generate life cycle costs and schedules for waste retrieval and processing scenarios. It uses time-based output data from the LCM to produce the logic ties in Primavera P6 necessary for shifting activities. The LCM Tool is evolving to address the needs of decision makers who want to understand the broad spectrum of risks facing complex organizations like DOE-RPP to understand how near

  5. The voice of Cervantes «creator» in Don Quixote

    Directory of Open Access Journals (Sweden)

    Florencio Sevilla Arroyo

    2010-12-01

    Full Text Available The aim of this paper is identifying the genuine voice of the Cervantes creator in the multiple choir of fictitious intermediaries involved in the authorship and the story of Don Quijote (reporter, editor, translator, Cide Hamete, supernarrator, readers, etc. trying, at the same time, to gauging the sense and the scope of their interventions. It happens that Miguel de Cervantes keeps to himself a novelistic role radically different depending on whether it is about the «story of story» or the «story itself»: refering to the first one, the author is out of the cast, delegating the reconstruction of Don Quixote’s legend in multiple fictional masks always comically manipulated; on the other hand, when it is the turn to the novelistic design of the chivalrous adventures of Don Quixote and Sancho, the voice of Cervantes creator comes to the forefront in order to take on, —as the «final author»— all narrative responsibility with absolute omniscience and solemnity. The resulting Quijote can only be explained from the intersection of both attitudes: the risible story of the most solemn/serious and magnificent novelistic bet never tried out..

  6. Designing and Implementing an Online GIS Tool for Schools: The Finnish Case of the PaikkaOppi Project

    Science.gov (United States)

    Riihelä, Juha; Mäki, Sanna

    2015-01-01

    This article describes initiatives implemented in Finland to create an online learning environment for studying geographic information systems (GIS). A development project produced an online GIS tool called PaikkaOppi, aimed at promoting GIS studies and spatial thinking skills in upper secondary schools. The project is reviewed through analysis of…

  7. FREEWAT: an HORIZON 2020 project to build open source tools for water management.

    Science.gov (United States)

    Rossetto, Rudy; Borsi, Iacopo; Foglia, Laura

    2015-04-01

    tools for better producing feasibility and management plans; (ii) a set of activities devoted to fix bugs and to provide a well-integrated interface for the different tools implemented. Further capabilities to be integrated are: - a dedicated module for water management and planning that will help to manage and aggregate all the distributed data coming from the simulation scenarios; - a whole module for calibration, uncertainty and sensitivity analysis; - a module for solute transport in the unsaturated zone; - a module for crop growth and water requirements in agriculture; - tools for dealing with groundwater quality issues; - tools for the analysis, interpretation and visualization of hydrogeological data. Through creating a common environment among water research/professionals, policy makers and implementers, FREEWAT main impact will be on enhancing science- and participatory approach and evidence-based decision making in water resource management, hence producing relevant and appropriate outcomes for policy implementation. The Consortium is constituted by partners from various water sectors from 10 EU countries, plus Turkey and Ukraine. Synergies with the UNESCO HOPE initiative on free and open source software in water management greatly boost the value of the project. Large stakeholders involvement is thought to guarantee results dissemination and exploitation. Acknowledgements This paper is presented within the framework of the project FREEWAT, which has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement n. 642224. References MARSOL (2014). Demonstrating Managed Aquifer Recharge as a Solution to Water Scarcity and Drought www.marsol.eu [accessed 4 January 2015] Rossetto, R., Borsi, I., Schifani, C., Bonari, E., Mogorovich P. & Primicerio M. (2013) - SID&GRID: integrating hydrological modeling in GIS environment hydroinformatics system for the management of the water resource. Rendiconti Online Societa

  8. Moving Beyond Indignation: Stakeholder Tactics, Legal Tools and Community Benefits in Large-Scale Redevelopment Projects

    Directory of Open Access Journals (Sweden)

    Lisa Bornstein

    2015-03-01

    Full Text Available Government and accompanying business interests often favour large-scale urban projects to promote urban growth, attract revenues, and place the city on the world stage. Such projects are primarily oriented towards consumption and spectacle, serving regional, if not global, clientele. Negative impacts – from traffic to displacement – are felt most heavily in the immediately adjacent areas, and developments often contribute to increases in socio-spatial polarization. This paper examines two redevelopment projects, one in South San Francisco, one in Montréal, to assess the tactics and legal tools employed by municipal authorities and local organisations to harness development for social and environmental ends. Associated legal tools include public consultation requirements, citizen ballot propositions, Community Benefits Agreements and Development Agreements. The paper concludes with recommended principles to underpin future development and cautionary notes about the limitations of these tools. Los gobiernos e intereses empresariales que los acompañan, favorecen a menudo proyectos urbanísticos de gran escala, para promover el crecimiento urbano, atraer ingresos, y poner la ciudad en el mapa. Estos proyectos están orientados principalmente hacia el consumo y el espectáculo, al servicio de una clientela regional, si no global. Los impactos negativos –desde el tráfico a los desplazamientos– se dejan sentir con más fuerza en las áreas inmediatamente adyacentes, y su desarrollo a menudo contribuye al aumento de la polarización socio-espacial. Este artículo examina dos proyectos de reurbanización, uno en el sur de San Francisco, y el otro en Montreal, para evaluar las tácticas y herramientas legales empleadas por las autoridades municipales y organizaciones locales para potenciar el desarrollo de los fines sociales y ambientales. Entre las herramientas jurídicas asociadas se incluyen los requisitos de consulta pública, propuestas

  9. E-infocenter, a visual tool for project management in educational robotics using web technologies

    Directory of Open Access Journals (Sweden)

    Kathia Pittí Patiño

    2012-07-01

    Full Text Available Normal.dotm 0 0 1 147 838 Universidad de Salamanca 6 1 1029 12.0 0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Internet applications and educational robotics are technologies that are characterized by their relatively novelty and motivating character. They are the ideal setting for the application of active teaching methods. The project-based learning is considered as one of the most attractive of these teaching methods. Under our approach, the projects with robots makes use of the Web 2.0 collaborative environment, so this one will be considered as student support tool. In this way they can develop many skills that are easily transferable to the work-market. In this paper, an online visual tool called E-infocenter is described. We will show the developed selection process, the design and the implementation of the mentioned project management. This tool has been used for the first time for six weeks in the workshop “Vehicles LEGO NXT” that is, an experience dedicated to children aged between 8 and 15 years. The benefits perceived by the participants have been at management level, emotional and collaboration.

  10. The MY NASA DATA Project: Tools and a Collaboration Space for Knowledge Discovery

    Science.gov (United States)

    Chambers, L. H.; Alston, E. J.; Diones, D. D.; Moore, S. W.; Oots, P. C.; Phelps, C. S.

    2006-05-01

    The Atmospheric Science Data Center (ASDC) at NASA Langley Research Center is charged with serving a wide user community that is interested in its large data holdings in the areas of Aerosols, Clouds, Radiation Budget, and Tropospheric Chemistry. Most of the data holdings, however, are in large files with specialized data formats. The MY NASA DATA (mynasadata.larc.nasa.gov) project began in 2004, as part of the NASA Research, Education, and Applications Solutions Network (REASoN), in order to open this important resource to a broader community including K-12 education and citizen scientists. MY NASA DATA (short for Mentoring and inquirY using NASA Data on Atmospheric and earth science for Teachers and Amateurs) consists of a web space that collects tools, lesson plans, and specially developed documentation to help the target audience more easily use the vast collection of NASA data about the Earth System. The core piece of the MY NASA DATA project is the creation of microsets (both static and custom) that make data easily accessible. The installation of a Live Access Server (LAS) greatly enhanced the ability for teachers, students, and citizen scientists to create and explore custom microsets of Earth System Science data. The LAS, which is an open source software tool using emerging data standards, also allows the MY NASA DATA team to make available data on other aspects of the Earth System from collaborating data centers. We are currently working with the Physical Oceanography DAAC at the Jet Propulsion Laboratory to bring in several parameters describing the ocean. In addition, MY NASA DATA serves as a central space for the K-12 community to share resources. The site already includes a dozen User-contributed lesson plans. This year we will be focusing on the Citizen Science portion of the site, and will be welcoming user-contributed project ideas, as well as reports of completed projects. An e-mentor network has also been created to involve a wider community in

  11. Wind power projects in the CDM: Methodologies and tools for baselines, carbon financing and sustainability analysis

    International Nuclear Information System (INIS)

    Ringius, L.; Grohnheit, P.E.; Nielsen, L.H.; Olivier, A.L.; Painuly, J.; Villavicencio, A.

    2002-12-01

    The report is intended to be a guidance document for project developers, investors, lenders, and CDM host countries involved in wind power projects in the CDM. The report explores in particular those issues that are important in CDM project assessment and development - that is, baseline development, carbon financing, and environmental sustainability. It does not deal in detail with those issues that are routinely covered in a standard wind power project assessment. The report tests, compares, and recommends methodologies for and approaches to baseline development. To present the application and implications of the various methodologies and approaches in a concrete context, Africa's largest wind farm-namely the 60 MW wind farm located in Zafarana, Egypt- is examined as a hypothetical CDM wind power project The report shows that for the present case example there is a difference of about 25% between the lowest (0.5496 tCO2/MWh) and the highest emission rate (0.6868 tCO 2 /MWh) estimated in accordance with these three standardized approaches to baseline development according to the Marrakesh Accord. This difference in emission factors comes about partly as a result of including hydroelectric power in the baseline scenario. Hydroelectric resources constitute around 21% of the generation capacity in Egypt, and, if excluding hydropower, the difference between the lowest and the highest baseline is reduced to 18%. Furthermore, since the two variations of the 'historical' baseline option examined result in the highest and the lowest baselines, by disregarding this baseline option altogether the difference between the lowest and the highest is reduced to 16%. The ES3-model, which the Systems Analysis Department at Risoe National Laboratory has developed, makes it possible for this report to explore the project-specific approach to baseline development in some detail. Based on quite disaggregated data on the Egyptian electricity system, including the wind power production

  12. The D2G2 project: a new software tool for nuclear engineering design in Canada

    International Nuclear Information System (INIS)

    Rheaume, P.; Lefebvre, J.F.; Roy, R.; Koclas, J.

    2004-01-01

    Nowadays, high quality neutronic simulation codes are readily available. The open source software suite DRAGON/DONJON is a good example. It is free, it has proven quality and correctness over the years and is still developed and maintained at Ecole Polytechnique de Montreal. However, most simulation codes have the following weaknesses: limited usability, poor maintainability, no internal data standardization and poor portability. The D2G2 project is a software development initiative which aims to create an upper layer software tool that annihilates the weakness of classic simulation codes. This paper presents D2G2Client's and D2G2Server's principal capabilities, how they interact and the libraries they use. (author)

  13. IU.R Residential Urban Interfaces. Strategies and tools for a renewal project

    Directory of Open Access Journals (Sweden)

    Sabrina Borgianni

    2012-10-01

    Full Text Available In the contemporary city, quality of urban space is a key element in life quality and a driving force for the competitiveness. The increasing complexity of relationships and the evolving needs and use patterns reflect urban complexity in a corresponding physical space: the urban interface, an entity that mediates the sociospatial relationships between public and private sphere and that assumes strategic importance in redevelopment of suburbs. Research, carried out on a case ‘study project’, defines the criteria for a Residential Urban Interface approach as a tool for micro-urban redevelopment which merge into the proposed Project Plan, the metaproject field aimed at process design, space design and design of management and use scenario.

  14. Application of performance assessment as a tool for guiding project work

    International Nuclear Information System (INIS)

    McCombie, C.; Zuidema, P.

    1992-01-01

    The ultimate aim of the performance assessment methodology developed over the last 10-15 years is to predict quantitatively the behavior of disposal systems over periods of time into the far future. The methodology can, however, also be applied in range of tasks during repository development and is in many programmes used as a tool for improving or optimizing the design of subsystem components of for guiding the course of project planning. In Swiss waste management program, there are several examples of the use of performance assessment as a tool in the manner mentioned above. The interaction between research models, assessment models and simplified models is considered to be of key importance and corresponding measures are taken to properly structure the process and to track the data: first, the results of all applications of the models are included in a consistent manner in the scenario analyses for the different sites and systems and, second, consistency in the underlying assumptions and in the data used in the different model calculations is assured by the consequent application of a configuration data management system (CDM). Almost all the applications of performance assessment have been included in Swiss work, but for this paper, only two examples have been selected: applications of performance assessment in both the HLW and the LLW program; and acceptance of specific waste types and their allocation to an appropriate repository on the basis of simplified safety analyses

  15. Communications tools in research projects to support Semi and Non Structured Information

    Directory of Open Access Journals (Sweden)

    Astrid Jaime

    2005-06-01

    Full Text Available Innovation and thus the production of knowledge becomes a factor of competitiveness. In this context quality management could be complemented by knowledge management to aim the improvement of knowledge production by research activities process. To this end, after describing knowledge and informa-tion typologies in engineering activities, a knowledge man-agement system is proposed. The goal is to support: (1 Semi-Structured Information (e.g. reports, etc. thanks to the BASIC-Lab tool functions, which are based on attributing points of view and annotations to documents and document zones, and (2 Non-Structured Information (such as mail, dialogues, etc., thanks to MICA-Graph approach which intends to support ex-change of technical messages that concerns common resolution of research problems within project teams and to capitalise relevant knowledge. For the both approaches, prototype tools have been developed and evaluated, primarily to feed back with manufacturing knowledge in the EADS industrial envi-ronment.

  16. Modelling human behaviour in a bumper car ride using molecular dynamics tools: a student project

    Science.gov (United States)

    Buendía, Jorge J.; Lopez, Hector; Sanchis, Guillem; Pardo, Luis Carlos

    2017-05-01

    Amusement parks are excellent laboratories of physics, not only to check physical laws, but also to investigate if those physical laws might also be applied to human behaviour. A group of Physics Engineering students from Universitat Politècnica de Catalunya has investigated if human behaviour, when driving bumper cars, can be modelled using tools borrowed from the analysis of molecular dynamics simulations, such as the radial and angular distribution functions. After acquiring several clips and obtaining the coordinates of the cars, those magnitudes are computed and analysed. Additionally, an analogous hard disks system is simulated to compare its distribution functions to those obtained from the cars’ coordinates. Despite the clear difference between bumper cars and a hard disk-like particle system, the obtained distribution functions are very similar. This suggests that there is no important effect of the individuals in the collective behaviour of the system in terms of structure. The research, performed by the students, has been undertaken in the frame of a motivational project designed to approach the scientific method for university students named FISIDABO. This project offers both the logistical and technical support to undertake the experiments designed by students at the amusement park of Barcelona TIBIDABO and accompanies them all along the scientific process.

  17. Update of the INPRO Collaborative Project, Proliferation Resistance and Safeguard ability Assessment (Prosta) Tools

    Energy Technology Data Exchange (ETDEWEB)

    Chang, H. L.; Kwon, E. H.; Ahn, S. K.; Ko, W. I.; Kim, H. D. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    The objectives of the INPRO Collaborative Project, Proliferation Resistance and Safeguard ability Assessment (PROSA) Tools are to make the INPRO proliferation resistance (PR) assessment methodology simpler and easier to use, to allow for different users and depths of analysis, to demonstrate the value and its usefulness of the refined assessment methodology to potential users, through a test with a reference case, and to provide input to a revision of the INPRO PR assessment manual. A summary of the project is described herein, including the procedure of PR assessment process and a case study using a SFR metal fuel manufacturing facility (SFMF) which is currently in the conceptual design phase at KAERI. The PROSA process with questionnaire approach is simpler and easier to perform that the original INPRO PR methodology with qualitative scale from 'weak' to 'very strong' to be determined by expert judgment. The PROSA process can be applied from the early stage of design showing the relationship of PR assessment to the SBD process.

  18. The KnowRISK project: Tools and strategies to reduce non-structural damage

    Science.gov (United States)

    Sousa Oliveira, Carlos; Lopes, Mário; Mota de Sá, Francisco; Amaral Ferreia, Mónica; Candeias, Paulo; Campos Costa, Alfredo; Rupakhety, Rajesh; Meroni, Fabrizio; Azzaro, Raffaele; D'Amico, Salvatore; Langer, Horst; Musacchio, Gemma; Sousa Silva, Delta; Falsaperla, Susanna; Scarfì, Luciano; Tusa, Giuseppina; Tuvé, Tiziana

    2016-04-01

    The project KnowRISK (Know your city, Reduce seISmic risK through non-structural elements) is financed by the European Commission to develop prevention measures that may reduce non-structural damage in urban areas. Pilot areas of the project are within the three European participating countries, namely Portugal, Iceland and Italy. Non-structural components of a building include all those components that are not part of the structural system, more specifically the architectural, mechanical, electrical, and plumbing systems, as well as furniture, fixtures, equipment, and contents. Windows, partitions, granite veneer, piping, ceilings, air conditioning ducts and equipment, elevators, computer and hospital equipment, file cabinets, and retail merchandise are all examples of non-structural components that are vulnerable to earthquake damage. We will use the experience gained during past earthquakes, which struck in particular Iceland, Italy and Portugal (Azores). Securing the non-structural elements improves the safety during an earthquake and saves lives. This paper aims at identifying non-structural seismic protection measures in the pilot areas and to develop a portfolio of good practices for the most common and serious non-structural vulnerabilities. This systematic identification and the portfolio will be achieved through a "cross-knowledge" strategy based on previous researches, evidence of non-structural damage in past earthquakes. Shake table tests of a group of non-structural elements will be performed. These tests will be filmed and, jointly with portfolio, will serve as didactic supporting tools to be used in workshops with building construction stakeholders and in risk communication activities. A Practical Guide for non-structural risk reduction will be specifically prepared for citizens on the basis of the outputs of the project, taking into account the local culture and needs of each participating country.

  19. Failure Modes Effects and Criticality Analysis, an Underutilized Safety, Reliability, Project Management and Systems Engineering Tool

    Science.gov (United States)

    Mullin, Daniel Richard

    2013-09-01

    The majority of space programs whether manned or unmanned for science or exploration require that a Failure Modes Effects and Criticality Analysis (FMECA) be performed as part of their safety and reliability activities. This comes as no surprise given that FMECAs have been an integral part of the reliability engineer's toolkit since the 1950s. The reasons for performing a FMECA are well known including fleshing out system single point failures, system hazards and critical components and functions. However, in the author's ten years' experience as a space systems safety and reliability engineer, findings demonstrate that the FMECA is often performed as an afterthought, simply to meet contract deliverable requirements and is often started long after the system requirements allocation and preliminary design have been completed. There are also important qualitative and quantitative components often missing which can provide useful data to all of project stakeholders. These include; probability of occurrence, probability of detection, time to effect and time to detect and, finally, the Risk Priority Number. This is unfortunate as the FMECA is a powerful system design tool that when used effectively, can help optimize system function while minimizing the risk of failure. When performed as early as possible in conjunction with writing the top level system requirements, the FMECA can provide instant feedback on the viability of the requirements while providing a valuable sanity check early in the design process. It can indicate which areas of the system will require redundancy and which areas are inherently the most risky from the onset. Based on historical and practical examples, it is this author's contention that FMECAs are an immense source of important information for all involved stakeholders in a given project and can provide several benefits including, efficient project management with respect to cost and schedule, system engineering and requirements management

  20. Software Tools Used for Continuous Assessment

    Directory of Open Access Journals (Sweden)

    Corina SBUGHEA

    2016-04-01

    Full Text Available he present paper addresses the subject of continuous evaluation and of the IT tools that support it. The approach starts from the main concepts and methods used in the teaching process, according to the assessment methodology and, then, it focuses on their implementation in the Wondershare QuizCreator software.

  1. [Clinical Experience of Beating Heart Atrial Septostomy Using a Device for Coronary Artery Anastomosis Site Creator].

    Science.gov (United States)

    Takahashi, Goro; Sai, Sadahiro; Konishi, Akinobu

    2015-09-01

    Intra-atrial communication was mandatory for several congenital cardiac diseases, such as pulmonary atresia with intact ventricular septum (PA/IVS), and either sided aortoventricular valve atresia. We assessed whether the new methods of atrial septal defect(ASD)creation was effective. We experienced 4 cases of the surgical atrial septostomy performed under on-pump beating. We used a new device, a circular punch out defect creator. All cases were alive. The mean ASD diameter was enlarged from 4.37 mm to 5.55 mm and the mean ASD shunt flow was significantly decreased from 1.47 m/s to 1.11 m/s. We performed the surgical atrial septostomy using an aortic puncher under beating heart effectively and safely.

  2. The man-made creators of the imbalance of water in Nature

    Science.gov (United States)

    Shlafman, L. M.; Kontar, V. A.

    2013-12-01

    At 2011 we have described the imbalance of water in Nature as the system [1]. At 2012 we have described water and carbon and the glaciers [2], [3] as creators of the imbalance of Nature. Now we are describing some man-made creators of the imbalance of Nature. The photosynthesis is a powerful creator of the imbalance of Nature. The photosynthesis significantly increases the complexity of the structures and reduces the entropy. Earth's hydrosphere contains water less than it was flowed via photosynthesis. This is an example of the imbalance of involving when the return of water has delayed because water is involved into the processes of life and other processes. People widely use photosynthesis and create not only an additional man-made imbalance of water in Nature, but also the man-made changing the albedo, and a lot of other important parameters of the planet of Earth. All of these processes are significantly imbalanced. The fossil hydrocarbons have accumulated during millions of years, but now are burned. This is an example of the imbalance delay by time. The man-made burning of the hydrocarbons is creating the imbalances of impact or explosive type, because of the burning processes is in millions of times faster than the accumulation processes. Please pay attention to the imbalance of redeployment by places. For example, oil and gas are extracted in one places, and burned in others. During combustion is standing out not only water, but energy, and other components. The temperature in the centers of big cities is always higher and there is dominating the rising air. It pollutes the environment, changes circulations, create greenhouse effect, etc. Other examples of the imbalance of relocation are shown in the production and consumption of food. The irrigation systems transfer water from one place to another. This transfer of water creates a lot of imbalances in change climate, ecosystems, etc in places where water was took and where the water was brought. Usually

  3. ESTIMA, a tool for EST management in a multi-project environment

    Directory of Open Access Journals (Sweden)

    Lewin Harris A

    2004-11-01

    Full Text Available Abstract Background Single-pass, partial sequencing of complementary DNA (cDNA libraries generates thousands of chromatograms that are processed into high quality expressed sequence tags (ESTs, and then assembled into contigs representative of putative genes. Usually, to be of value, ESTs and contigs must be associated with meaningful annotations, and made available to end-users. Results A web application, Expressed Sequence Tag Information Management and Annotation (ESTIMA, has been created to meet the EST annotation and data management requirements of multiple high-throughput EST sequencing projects. It is anchored on individual ESTs and organized around different properties of ESTs including chromatograms, base-calling quality scores, structure of assembled transcripts, and multiple sources of comparison to infer functional annotation, Gene Ontology associations, and cDNA library information. ESTIMA consists of a relational database schema and a set of interactive query interfaces. These are integrated with a suite of web-based tools that allow a user to query and retrieve information. Further, query results are interconnected among the various EST properties. ESTIMA has several unique features. Users may run their own EST processing pipeline, search against preferred reference genomes, and use any clustering and assembly algorithm. The ESTIMA database schema is very flexible and accepts output from any EST processing and assembly pipeline. ESTIMA has been used for the management of EST projects of many species, including honeybee (Apis mellifera, cattle (Bos taurus, songbird (Taeniopygia guttata, corn rootworm (Diabrotica vergifera, catfish (Ictalurus punctatus, Ictalurus furcatus, and apple (Malus x domestica. The entire resource may be downloaded and used as is, or readily adapted to fit the unique needs of other cDNA sequencing projects. Conclusions The scripts used to create the ESTIMA interface are freely available to academic users in

  4. ESTIMA, a tool for EST management in a multi-project environment.

    Science.gov (United States)

    Kumar, Charu G; LeDuc, Richard; Gong, George; Roinishivili, Levan; Lewin, Harris A; Liu, Lei

    2004-11-04

    Single-pass, partial sequencing of complementary DNA (cDNA) libraries generates thousands of chromatograms that are processed into high quality expressed sequence tags (ESTs), and then assembled into contigs representative of putative genes. Usually, to be of value, ESTs and contigs must be associated with meaningful annotations, and made available to end-users. A web application, Expressed Sequence Tag Information Management and Annotation (ESTIMA), has been created to meet the EST annotation and data management requirements of multiple high-throughput EST sequencing projects. It is anchored on individual ESTs and organized around different properties of ESTs including chromatograms, base-calling quality scores, structure of assembled transcripts, and multiple sources of comparison to infer functional annotation, Gene Ontology associations, and cDNA library information. ESTIMA consists of a relational database schema and a set of interactive query interfaces. These are integrated with a suite of web-based tools that allow a user to query and retrieve information. Further, query results are interconnected among the various EST properties. ESTIMA has several unique features. Users may run their own EST processing pipeline, search against preferred reference genomes, and use any clustering and assembly algorithm. The ESTIMA database schema is very flexible and accepts output from any EST processing and assembly pipeline. ESTIMA has been used for the management of EST projects of many species, including honeybee (Apis mellifera), cattle (Bos taurus), songbird (Taeniopygia guttata), corn rootworm (Diabrotica vergifera), catfish (Ictalurus punctatus, Ictalurus furcatus), and apple (Malus x domestica). The entire resource may be downloaded and used as is, or readily adapted to fit the unique needs of other cDNA sequencing projects. The scripts used to create the ESTIMA interface are freely available to academic users in an archived format from http

  5. Leveraging Google Geo Tools for Interactive STEM Education: Insights from the GEODE Project

    Science.gov (United States)

    Dordevic, M.; Whitmeyer, S. J.; De Paor, D. G.; Karabinos, P.; Burgin, S.; Coba, F.; Bentley, C.; St John, K. K.

    2016-12-01

    Web-based imagery and geospatial tools have transformed our ability to immerse students in global virtual environments. Google's suite of geospatial tools, such as Google Earth (± Engine), Google Maps, and Street View, allow developers and instructors to create interactive and immersive environments, where students can investigate and resolve common misconceptions in STEM concepts and natural processes. The GEODE (.net) project is developing digital resources to enhance STEM education. These include virtual field experiences (VFEs), such as an interactive visualization of the breakup of the Pangaea supercontinent, a "Grand Tour of the Terrestrial Planets," and GigaPan-based VFEs of sites like the Canadian Rockies. Web-based challenges, such as EarthQuiz (.net) and the "Fold Analysis Challenge," incorporate scaffolded investigations of geoscience concepts. EarthQuiz features web-hosted imagery, such as Street View, Photo Spheres, GigaPans, and Satellite View, as the basis for guided inquiry. In the Fold Analysis Challenge, upper-level undergraduates use Google Earth to evaluate a doubly-plunging fold at Sheep Mountain, WY. GEODE.net also features: "Reasons for the Seasons"—a Google Earth-based visualization that addresses misconceptions that abound amongst students, teachers, and the public, many of whom believe that seasonality is caused by large variations in Earth's distance from the Sun; "Plate Euler Pole Finder," which helps students understand rotational motion of tectonic plates on the globe; and "Exploring Marine Sediments Using Google Earth," an exercise that uses empirical data to explore the surficial distribution of marine sediments in the modern ocean. The GEODE research team includes the authors and: Heather Almquist, Cinzia Cervato, Gene Cooper, Helen Crompton, Terry Pavlis, Jen Piatek, Bill Richards, Jeff Ryan, Ron Schott, Barb Tewksbury, and their students and collaborating colleagues. We are supported by NSF DUE 1323419 and a Google Geo

  6. MUsical Tools for ENhancing the Awareness of Global Emergencies (The MUTENAGE Project)

    Science.gov (United States)

    Lanza, T.; Menghini, A.; Pontani, S.; Sapia, V.

    2017-12-01

    What if the sound extrapolated from the Earth, using a codified methodology, would raise emotions in accordance with the environmental critical issues of a particular site? Antonio Menghini (geophysicist expert of the TEM Method) and Stefano Pontani (a musician) have codified a procedure that transforms geophysical data (transient electromagnetic) into musical notes. Now it is possible to compose musical tracks describing faithfully the risk and geological issues related to different environmental scenarios: 1) Pollution of aquifers; 2) Seawater intrusion along the coastlines; 3) Seismic risk; 4) Drought; 5) Permafrost melting For each of these environmental emergencies, the TEM method (Time Domain Electromagnetics) shows an excellent diagnostic feature, so that the technical-scientific community widely employs it since many year. In fact, the variations of the recorded signal (voltage) reflect the modifications induced on the Earth system. Associating well defined musical "footprints" to these geophysical variations, through the sonification process, we have an extraordinary didactic-popular tool, able to make the impact of climatic-environmental changes easily understandable to the common people and to students of every age and grade. We will present some examples, one being the musical effect of seawater intrusion, that is well marked by the progressive increase of the pitches, when approaching the coastline. Other interesting examples come from the sonification of the TEM data acquired on seismic area especially highlighting the effect of seismic wave amplification associated to earthquakes. Besides being a new source of inspiration for musicians, the MUTENAGE Project is intended for delivering didactic tools, for scientific museums and schools, and a series of EM concerts, that will be located in different countries, for each of the above mentioned environmental issues.

  7. Projectables

    DEFF Research Database (Denmark)

    Rasmussen, Troels A.; Merritt, Timothy R.

    2017-01-01

    CNC cutting machines have become essential tools for designers and architects enabling rapid prototyping, model-building and production of high quality components. Designers often cut from new materials, discarding the irregularly shaped remains. We introduce ProjecTables, a visual augmented...... reality system for interactive packing of model parts onto sheet materials. ProjecTables enables designers to (re)use scrap materials for CNC cutting that would have been previously thrown away, at the same time supporting aesthetic choices related to wood grain, avoiding surface blemishes, and other...... relevant material properties. We conducted evaluations of ProjecTables with design students from Aarhus School of Architecture, demonstrating that participants could quickly and easily place and orient model parts reducing material waste. Contextual interviews and ideation sessions led to a deeper...

  8. A study on the effectiveness of task manager board game as a training tool in managing project

    Science.gov (United States)

    Yusof, Shahrul Azmi Mohd; Radzi, Shanizan Herman Md; Din, Sharifah Nadera Syed; Khalid, Nurhafizah

    2016-08-01

    Nowadays, games have become one of the useful tools in training. Many instructors choose to use games to enhance the way of delivering the subject. Failure to apply the suitable tool in training will lead to discouragement in learning and causing waste to the resources. An effective game will help the student understand the concept quickly. It can also help students to get involve in experiential learning where the student can manage and solve the problem as in the actual situation. This study will focus on the effectiveness of board game as a training tool for managing projects. This game has 4 tasks to be completed by students. They will be divided into a group of 4 or 5. Two methods are used in this study, pilot test, and post-test. These methods are chosen to analyze the effectiveness of using Task Manager Board Game as a teaching tool and the improvement of student's knowledge in project management. Three sub-components assessed were motivation, user experience and learning using case studies on Kirkpatrick's level one base on the perception of the students. The result indicated that the use of Task Manager board game as a training tool for managing project has a positive impact on students. It helps students to experience the situation of managing projects. It is one of the easiest ways for improving time management, human resources and communication skill.

  9. Crowdsourcing as citizen-empowered tool for natural hazards. The MAppERS project.

    Science.gov (United States)

    Bossi, Giulia; Mantovani, Matteo; Frigerio, Simone; Møller Janniche, Amalie; Bianchizza, Chiara; Del Bianco, Daniele

    2016-04-01

    MAppERS is a co-financed project by European Commission and it is focused on natural hazards risk prevention and emergency response, through the development of a smartphone application. The idea relies on the role of citizens and volunteers as 'territorial mappers' and the information they can provide to civil protection operators through the use of their smartphones. The strategy is to promote the active participation of citizens and volunteers in disaster risk reduction promoting responsibility and preparedness. The application embraces tools for crowdsourcing data collection, for preparedness, prevention and alert warnings. The pilot activity conducted in order to assess its usability and performance is presented. One activity presented took place in Denmark, by Frederikssund Halsnæs Fire & Rescue Service, where 12 voluntary citizens were enrolled. The age ranged between young and elderly people with different educational level. Two separated groups were defined; one followed an introductory course on the application usage and were supervised during the test, while the other was untrained and without support. The usability of the app was assessed through the filling in of a form. Results showed that volunteers were extremely interested in the app and were seeing the advantage of using it. The app was considered user-friendly even to elderly people. The differences in comprehension of several aspects of the application by the two groups allowed to highlight the weak points in terms of approachability. These were then addressed in the following release of the app.

  10. How Project Management Tools Aid in Association to Advance Collegiate Schools of Business (AACSB) International Maintenance of Accreditation

    Science.gov (United States)

    Cann, Cynthia W.; Brumagim, Alan L.

    2008-01-01

    The authors present the case of one business college's use of project management techniques as tools for accomplishing Association to Advance Collegiate Schools of Business (AACSB) International maintenance of accreditation. Using these techniques provides an efficient and effective method of organizing maintenance efforts. In addition, using…

  11. Authoring Tools for Simulation-Based CBT--an Interim Project Report. Occasional Paper InTER/13/89.

    Science.gov (United States)

    Lewis, R., Ed.; Mace, Terry, Ed.

    This paper describes a project which aims to create an authoring environment for simulation-based training in order to illustrate features necessary for: (1) an environment which can be used by teachers/trainers with minimum technical skills; (2) rapid prototyping by all courseware producers; (3) and tools for model building. The paper begins with…

  12. A tool for improving the management of social and human rights risks at project sites: The Human Rights Sphere

    NARCIS (Netherlands)

    van der Ploeg, Lidewij; Vanclay, Frank

    2017-01-01

    This paper identifies and addresses the challenges of implementing the corporate responsibility to respect human rights in practice at project sites. To support on-ground operational staff, we offer the Human Rights Sphere (HRS), a practical tool we developed from empirical research in three

  13. A tool for improving the management of social and human rights risks at project sites : The Human Rights Sphere

    NARCIS (Netherlands)

    van der Ploeg, Lidewij; Vanclay, Frank

    2017-01-01

    This paper identifies and addresses the challenges of implementing the corporate responsibility to respect human rights in practice at project sites. To support on-ground operational staff, we offer the Human Rights Sphere (HRS), a practical tool we developed from empirical research in three

  14. Outage planning in nuclear power plants. A paradigm shift from an external towards an integrated project planning tool

    Energy Technology Data Exchange (ETDEWEB)

    Rosemann, Andreas [Gesellschaft fuer integrierte Systemplanung (GiS) mbH, Weinheim (Germany)

    2014-05-15

    In nuclear power plants it is common to carry out the technical planning of the annual outage work orders in an Enterprise Application Management (EAM) system and to schedule the outage tasks in a project planning tool. The reason for this is historical: Former EAM systems did not (or just to some extend) offer the necessary functionalities to realise the scheduling of the outage; graphical support for the planning was not provided at all. Consequently, scheduling the annual outage was performed in a separate planning tool. Modern Enterprise Application Management (EAM) software builds on established project planning tools with respect to the functionalities and timing of work orders. As a standard they provide editable charts as well as a lot of functionalities which are required for scheduling the annual outage. The functional gap between the demanded planning functionalities and the functionalities provided by the EAM system has been significantly reduced. Depending on the deployed software itself it is possible to extend the EAM system with little effort (in comparison to the promising advantages) so that external project timing planning tools are not required any more. By shifting towards an integrated planning tool, efficiency in planning an outage as well as the quality of communication of the current planning status increases. Furthermore, the basis of information for work orders by the control room staff and therefore safety can be enhanced. (orig.)

  15. Outage planning in nuclear power plants. A paradigm shift from an external towards an integrated project planning tool

    International Nuclear Information System (INIS)

    Rosemann, Andreas

    2014-01-01

    In nuclear power plants it is common to carry out the technical planning of the annual outage work orders in an Enterprise Application Management (EAM) system and to schedule the outage tasks in a project planning tool. The reason for this is historical: Former EAM systems did not (or just to some extend) offer the necessary functionalities to realise the scheduling of the outage; graphical support for the planning was not provided at all. Consequently, scheduling the annual outage was performed in a separate planning tool. Modern Enterprise Application Management (EAM) software builds on established project planning tools with respect to the functionalities and timing of work orders. As a standard they provide editable charts as well as a lot of functionalities which are required for scheduling the annual outage. The functional gap between the demanded planning functionalities and the functionalities provided by the EAM system has been significantly reduced. Depending on the deployed software itself it is possible to extend the EAM system with little effort (in comparison to the promising advantages) so that external project timing planning tools are not required any more. By shifting towards an integrated planning tool, efficiency in planning an outage as well as the quality of communication of the current planning status increases. Furthermore, the basis of information for work orders by the control room staff and therefore safety can be enhanced. (orig.)

  16. Europeanization by it is tools: the case of European transnational projects

    NARCIS (Netherlands)

    Sanchez Salgado, R.

    2010-01-01

    In the understanding of Europeanization, specific tools of governance matter. Europeanization through flexible tools of governance enables strategic uses by domestic actors, and does not necessaritly preclude policy transfer or transformation. As long as they favour participation, European

  17. Summary Report on Information Technology Integration Activities For project to Enhance NASA Tools for Coastal Managers in the Gulf of Mexico and Support Technology Transfer to Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Gulbransen, Thomas C.

    2009-04-27

    Deliverable to NASA Stennis Space Center summarizing summarizes accomplishments made by Battelle and its subcontractors to integrate NASA's COAST visualization tool with the Noesis search tool developed under the Gulf of Mexico Regional Collaborative project.

  18. The KnowRISK project: Tools and strategies for risk communication and learning

    Science.gov (United States)

    Musacchio, Gemma; Amaral Ferreira, Mónica; Falsaperla, Susanna; Piangiamore, Giovanna Lucia; Pino, Nicola Alessandro; Solarino, Stefano; Crescimbene, Massimo; Eva, Elena; Reitano, Danilo; Þorvaldsdottir, Solveig; Sousa Silva, Delta; Rupakhety, Rajesh; Sousa Oliveira, Carlos

    2016-04-01

    Damage of non-structural elements of buildings (i.e. partitions, ceilings, cladding, electrical and mechanical systems and furniture) is known to cause injuries and human losses. Also it has a significant impact on earthquake resilience and is yet being worldwide underestimated. The project KnowRISK (Know your city, Reduce seISmic risK through non-structural elements) is financed by the European Commission to develop prevention measures that may reduce non-structural damage in urban areas. Pilot areas of the project are within the three European participating countries, namely Portugal, Iceland and Italy. They were chosen because they are prone to damage level 2 and 3 (EMS-98, European Macroseismic Scale) that typically affects non-structural elements. We will develop and test a risk communication strategy taking into account the needs of households and schools, putting into practice a portfolio of best practice to reduce the most common non-structural vulnerabilities. We will target our actions to different societal groups, considering their cultural background and social vulnerabilities, and implement a participatory approach that will promote engagement and interaction between the scientific community, practitioners and citizens to foster knowledge on everyone's own neighborhoods, resilience and vulnerability. A Practical Guide for citizens will highlight that low-cost actions can be implemented to increase safety of households, meant as being the places where the most vulnerable societal groups, including children and elderly people, spend much of their time. Since our actions towards communication will include education, we will define tools that allow a clear and direct understanding of elements exposed to risk. Schools will be one of our target societal groups and their central role played at the community level will ensure spreading and strengthening of the communication process. Schools are often located in old or re-adapted buildings, formerly used for

  19. Tall-Building Projects Sustainability Indicator (TPSI: A New Design and Environmental Assessment Tool for Tall Buildings

    Directory of Open Access Journals (Sweden)

    Hasim Altan

    2012-04-01

    Full Text Available The paper presents the features of Tall-building Projects Sustainability Indicator (TPSI—a “Sustainability Rating System” that specializes in tall-building projects. The system comprises two components; the “Technical Manual” in the form of a booklet and the “Calculator” in the form of an Excel tool. It can be used as a “design tool” and/or as a “checklist” to compare and to improve the sustainable performance of tall-building design schemes. At the same time, the system can be used to evaluate the sustainability of existing tall-building projects. The first version of the TPSI rating system (TPSI 2012 Version was released as an online tool (GreenLight and thoroughly examined and validated by multiple parties.

  20. Project-focused activity and knowledge tracker: a unified data analysis, collaboration, and workflow tool for medicinal chemistry project teams.

    Science.gov (United States)

    Brodney, Marian D; Brosius, Arthur D; Gregory, Tracy; Heck, Steven D; Klug-McLeod, Jacquelyn L; Poss, Christopher S

    2009-12-01

    Advances in the field of drug discovery have brought an explosion in the quantity of data available to medicinal chemists and other project team members. New strategies and systems are needed to help these scientists to efficiently gather, organize, analyze, annotate, and share data about potential new drug molecules of interest to their project teams. Herein we describe a suite of integrated services and end-user applications that facilitate these activities throughout the medicinal chemistry design cycle. The Automated Data Presentation (ADP) and Virtual Compound Profiler (VCP) processes automate the gathering, organization, and storage of real and virtual molecules, respectively, and associated data. The Project-Focused Activity and Knowledge Tracker (PFAKT) provides a unified data analysis and collaboration environment, enhancing decision-making, improving team communication, and increasing efficiency.

  1. Fiscal 1997 research report. International energy use rationalization project (Analytical tool research project for energy consumption efficiency improvement in Asia); 1997 nendo kokusai energy shiyo gorika nado taisaku jigyo chosa hokokusho. Asia energy shohi koritsuka bunseki tool chosa jigyo (honpen)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    Efforts have been under way to prepare inter-industry relations tables and energy data for four Asian countries, namely, China, Taiwan, Singapore and Malaysia, and a tool for energy consumption efficiency analysis has been developed and improved. In Chapter 1, energy supply and demand in the above-named four countries is reviewed on the basis of recent economic situations in these countries. In Chapter 2, bilateral inter-industry relations tables usable under the project are employed for the analysis of the economic status of each of the countries and energy transactions between them, and a method is described of converting the tables into one-nation inter-industry relations tables which meet the need of this project. In Chapter 3, national characteristics reflected on the respective energy input tables are described, and a method is shown of converting a nationally characterized unit energy table into a common unit energy input table for registration with a database. In Chapter 4, the constitution of the Asian energy consumption efficiency improvement analyzing tool and a system using the tool are explained. In Chapter 5, some examples of analyses conducted by use of the analyzing tool are shown, in which the energy saving effect and CO2 emission reduction effect are estimated for Indonesia by use of the analyzing tool. (NEDO)

  2. Developing an online support tool to assist students in higher education with project proposals

    OpenAIRE

    Haji Suhaili, Wida Susanty

    2015-01-01

    The research presented in this thesis investigates ways to assist students with writing their project proposals. There is limited literature on the problems students have when writing project proposals in Higher Education. Particularly most of the literature has concentrated on the writing aspects, rhetorical aspects and structure of a scientific article. Even though various studies on assessment of undergraduate individual and group project works have been done, the project pr...

  3. International measures project for rational energy use (Survey project of the analysis tool of Asian energy consumption efficiency). List of errata; 1998 nendo kokusai energy shiyo gorika nado taisaku jigyo seigohyo. Asia energy shohi koritsuka bunseki tool chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The list of errata was prepared for the data book of the international measures project for rational energy use (Survey project of the analysis tool of Asian energy consumption efficiency). Corrected pages of the data book 1 (1990) are as follows: 187-190, 223-226, 259-262, 295- 298, 369-370, 387-388 and 405-406 on Malaysian data. Corrected pages of the data book 2 (1985) are as follows: 102-105 on Chinese data, 154 on common data, and 187-190, 223-226, 259-262, 295-298, 369-370, 387-388 and 405-406 on Malaysian data. (NEDO)

  4. A forward looking approach to project management tools, trends, and the impact of disruptive technologies

    CERN Document Server

    Gurjar, Nikhil

    2017-01-01

    This book is intended as a basis for advanced treatment of concepts in project management. In the current scenario where most questions are answered through the internet, the knowledge element in project management has come under the influence of disruptive technologies. In other words, project managers no longer get 'points' for knowing something that is easily available on the internet. This has far-reaching consequences. The present day project managers need to orient themselves to newer benchmarks of what is required for success on the business front. This book deals with a few such advanced concepts in project management. This book is not designed as an elementary primer to the field of project management, rather it is an advanced level treatment on the subject, to be read after the preliminary study has already been completed. The book is designed for practicing project managers, and graduate students in engineering and management, who need to understand the dynamics that are typically encountered in a ...

  5. Multi-site risk-based project planning, optimization, sequencing and budgeting process and tool for the integrated facility disposition project - 59394

    International Nuclear Information System (INIS)

    Nelson, Jerel; Castillo, Carlos; Huntsman, Julie; Lucek, Heather; Marks, Tim

    2012-01-01

    Document available in abstract form only. Full text of publication follows: Faced with the DOE Complex Transformation, NNSA was tasked with developing an integrated plan for the decommissioning of over 400 facilities and 300 environmental remediation units, as well as the many reconfiguration and modernization projects at the Oak Ridge National Laboratory (ORNL) and Y-12 Complex. Manual scheduling of remediation activities is time-consuming, labor intensive, and inherently introduces bias and unaccounted for aspects of the scheduler or organization in the process. Clearly a tool was needed to develop an objective, unbiased baseline optimized project sequence and schedule with a sound technical foundation for the Integrated Facility Disposition Project (IFDP). In generating an integrated disposition schedule, each project (including facilities, environmental sites, and remedial action units) was identified, characterized, then ranked relative to other projects. Risk matrices allowed for core project data to be extrapolated into probable contamination levels, relative risks to the public, and other technical and risk parameters to be used in the development of an overall ranking. These matrices ultimately generated a complete data set that were used in the Ranking and Sequencing Model (RSM), commonly referred to as the SUPER model, for its numerous abilities to support D and D planning, prioritization, and sequencing

  6. Stored CO2 and Methane Leakage Risk Assessment and Monitoring Tool Development: CO2 Capture Project Phase 2 (CCP2)

    Energy Technology Data Exchange (ETDEWEB)

    Dan Kieki

    2008-09-30

    The primary project goal is to develop and test tools for optimization of ECBM recovery and geologic storage of CO{sub 2} in coalbeds, in addition to tools for monitoring CO{sub 2} sequestration in coalbeds to support risk assessment. Three critical topics identified are (1) the integrity of coal bed methane geologic and engineered systems, (2) the optimization of the coal bed storage process, and (3) reliable monitoring and verification systems appropriate to the special conditions of CO{sub 2} storage and flow in coals.

  7. Aligning Web-Based Tools to the Research Process Cycle: A Resource for Collaborative Research Projects

    Science.gov (United States)

    Price, Geoffrey P.; Wright, Vivian H.

    2012-01-01

    Using John Creswell's Research Process Cycle as a framework, this article describes various web-based collaborative technologies useful for enhancing the organization and efficiency of educational research. Visualization tools (Cacoo) assist researchers in identifying a research problem. Resource storage tools (Delicious, Mendeley, EasyBib)…

  8. Impact of the implementation of an online network support tool among clinicians of primary health care and specialists: ECOPIH Project.

    Science.gov (United States)

    Lacasta Tintorer, David; Flayeh Beneyto, Souhel; Alzaga Reig, Xavier; Mundet Tuduri, Xavier; De la Fuente, Josep Anton; Manresa, Josep Maria; Torán Monserrat, Pere; Saigí Rubió, Francesc

    2013-10-03

    There has been created an online communication tool with the objective to improve the communication among different levels of care, between Primary Care clinicians and Specialists. This tool is web 2.0 based technology (ECOPIH project). It allows to review clinical cases and to share knowledge. Our study will evaluate its impact in terms of reduction on the number of referrals to three specialties two years after the use of this tool. Open, multicenter, controlled, non random intervention study over 24 months. Study population includes 131 Primary Care Physicians assigned to nine health centers. The study will compare the clinicians that use the ECOPIH with the ones that do not use the tool. Also, professionals that start to use the tool during the period time of the study will be included.The number of annual referrals during the first and second year will be analyzed and retrospectively compared with the previous year to the implementation of the tool. Moreover, it will be assessed the level of satisfaction of the professionals with the tool and to what extend the tool responds to their needs. The implementation of ECOPIH in the field of Primary Health Care can decrease the number of referrals from primary care to specialist care.It is expected that the reduction will be more noticeable in the group of professionals that use more intensively the tool. Furthermore, we believe that it can be also observed with the professionals that read the contributions of the others.We anticipate high degree of customer satisfaction as it is a very helpful resource never used before in our environment.

  9. Why new tools were developed for the 'GeoPortalNetwork : Liberty United" project

    NARCIS (Netherlands)

    Vanmeulebrouk, B.; Van Swol, R.; Kuyper, M.; Bulens, J.; Zevenbergen, J.A.

    2009-01-01

    As part of the national innovation co-funding scheme “Space for Geo-information” the project “GeoPortal Network: Liberty United” ran from late 2005 till the end of 2008. Purpose of the project was to promote access to geo-spatial information via web services. To achieve this goal, a network of

  10. THE THEORETIC-METHODOLOGICAL TOOLS OF EFFECTIVE ESTIMATION OF ORGANIZATION TECHNOLOGICAL SOLUTIONS OF CONSTRUCTION PROJECT

    Directory of Open Access Journals (Sweden)

    E. Yu. Antipenko

    2010-03-01

    Full Text Available In the article the structural analysis of efficiency indices elements of organization-and-technology solutions of construction project scheduling is executed for preparation of high-quality base of providing the planning processes and subsequent realization of the projects.

  11. Firm Readiness Level for Innovation Projects: A New Decision-Making Tool for Innovation Managers

    Directory of Open Access Journals (Sweden)

    Daniel Galvez

    2018-03-01

    Full Text Available Innovation projects represent a major challenge for business managers due to their associated uncertainty degree. The already existing methodologies to support the innovation projects are aimed at piloting them and establishing the management stages in a flexible and agile way during their deployment. This paper proposes a complementary ex-ante methodology that seeks to aid the decision-making of companies to choose whether or not to launch a potential innovation project. This methodology evaluates to what extent the technological system of the company has the minimum required maturity degree of competencies to successfully achieve the innovation project. Thus, in first instance, an innovation project is characterized according to its novelty degree; both inside the company and in its environment. Subsequently, according to the previous characterization, the future project will have an impact on the technological system of the company. The capabilities of the firm are represented by a set of good practices associated with the innovation projects’ management that the company is able to deploy. Finally, the minimum maturity degree required by a particular project of these practices is determined. Then, the gap between the maturity requirement profile and the current profile of the company is established enabling to decide on the implementation of the project or not.

  12. Perseus Project: Interactive Teaching and Research Tools for Ancient Greek Civilization.

    Science.gov (United States)

    Crane, Gregory; Harward, V. Judson

    1987-01-01

    Describes the Perseus Project, an educational program utilizing computer technology to study ancient Greek civilization. Including approximately 10 percent of all ancient literature and visual information on architecture, sculpture, ceramics, topography, and archaeology, the project spans a range of disciplines. States that Perseus fuels student…

  13. The Use of Poster Projects as a Motivational and Learning Tool in Managerial Accounting Courses

    Science.gov (United States)

    Altintas, Nergis Nalan; Suer, Ayca Zeynep; Sari, Emre Selcuk; Ulker, Mirac Sema

    2014-01-01

    Poster projects are an alternative method of motivation, learning, and information dissemination in education. The main purpose of this initial study was to determine the effect of poster projects on the motivational and learning process of managerial accounting students. In addition, the authors aimed to compare the opinions of managerial…

  14. An Experiment with Using Google Tools for Project Supervision at Tertiary Education

    DEFF Research Database (Denmark)

    Srba, Jiri

    2010-01-01

    Problem oriented project pedagogy is an alternative educational approach which often provides a strong natural motivation for the students' work. On the other hand, it requires certain coordination and cooperation skills in communication inside the project group as well as between the group and its...

  15. Wind power projects in the CDM: Methodologies and tools for baselines, carbon financing and substainability analysis

    DEFF Research Database (Denmark)

    Ringius, L.; Grohnheit, Poul Erik; Nielsen, Lars Henrik

    2002-01-01

    and implications of the various methodologies and approaches in a concrete context, Africa's largest wind farm-namely the 60 MW wind farm located in Zafarana,Egypt is examined as a hypothetical CDM wind power project The report shows that for the present case example there is a difference of about 25% between......The report is intended to be a guidance document for project developers, investors, lenders, and CDM host countries involved in wind power projects in the CDM. The report explores in particular those issues that are important in CDM project assessment anddevelopment - that is, baseline development......, carbon financing, and environmental sustainability. It does not deal in detail with those issues that are routinely covered in a standard wind power project assessment. The report tests, compares, andrecommends methodologies for and approaches to baseline development. To present the application...

  16. Integration of ROOT notebook as an ATLAS analysis web-based tool in outreach and public data release projects

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00237353; The ATLAS collaboration

    2017-01-01

    Integration of the ROOT data analysis framework with the Jupyter Notebook technology presents the potential of enhancement and expansion of educational and training programs. It can be beneficial for university students in their early years, new PhD students and post-doctoral researchers, as well as for senior researchers and teachers who want to refresh their data analysis skills or to introduce a more friendly and yet very powerful open source tool in the classroom. Such tools have been already tested in several environments. A fully web-based integration of the tools and the Open Access Data repositories brings the possibility to go a step forward in the ATLAS quest of making use of several CERN projects in the field of the education and training, developing new computing solutions on the way.

  17. A Microsoft Project-Based Planning, Tracking, and Management Tool for the National Transonic Facility's Model Changeover Process

    Science.gov (United States)

    Vairo, Daniel M.

    1998-01-01

    The removal and installation of sting-mounted wind tunnel models in the National Transonic Facility (NTF) is a multi-task process having a large impact on the annual throughput of the facility. Approximately ten model removal and installation cycles occur annually at the NTF with each cycle requiring slightly over five days to complete. The various tasks of the model changeover process were modeled in Microsoft Project as a template to provide a planning, tracking, and management tool. The template can also be used as a tool to evaluate improvements to this process. This document describes the development of the template and provides step-by-step instructions on its use and as a planning and tracking tool. A secondary role of this document is to provide an overview of the model changeover process and briefly describe the tasks associated with it.

  18. A generally applicable lightweight method for calculating a value structure for tools and services in bioinformatics infrastructure projects.

    Science.gov (United States)

    Mayer, Gerhard; Quast, Christian; Felden, Janine; Lange, Matthias; Prinz, Manuel; Pühler, Alfred; Lawerenz, Chris; Scholz, Uwe; Glöckner, Frank Oliver; Müller, Wolfgang; Marcus, Katrin; Eisenacher, Martin

    2017-10-30

    Sustainable noncommercial bioinformatics infrastructures are a prerequisite to use and take advantage of the potential of big data analysis for research and economy. Consequently, funders, universities and institutes as well as users ask for a transparent value model for the tools and services offered. In this article, a generally applicable lightweight method is described by which bioinformatics infrastructure projects can estimate the value of tools and services offered without determining exactly the total costs of ownership. Five representative scenarios for value estimation from a rough estimation to a detailed breakdown of costs are presented. To account for the diversity in bioinformatics applications and services, the notion of service-specific 'service provision units' is introduced together with the factors influencing them and the main underlying assumptions for these 'value influencing factors'. Special attention is given on how to handle personnel costs and indirect costs such as electricity. Four examples are presented for the calculation of the value of tools and services provided by the German Network for Bioinformatics Infrastructure (de.NBI): one for tool usage, one for (Web-based) database analyses, one for consulting services and one for bioinformatics training events. Finally, from the discussed values, the costs of direct funding and the costs of payment of services by funded projects are calculated and compared. © The Author 2017. Published by Oxford University Press.

  19. Analyzing HT-SELEX data with the Galaxy Project tools--A web based bioinformatics platform for biomedical research.

    Science.gov (United States)

    Thiel, William H; Giangrande, Paloma H

    2016-03-15

    The development of DNA and RNA aptamers for research as well as diagnostic and therapeutic applications is a rapidly growing field. In the past decade, the process of identifying aptamers has been revolutionized with the advent of high-throughput sequencing (HTS). However, bioinformatics tools that enable the average molecular biologist to analyze these large datasets and expedite the identification of candidate aptamer sequences have been lagging behind the HTS revolution. The Galaxy Project was developed in order to efficiently analyze genome, exome, and transcriptome HTS data, and we have now applied these tools to aptamer HTS data. The Galaxy Project's public webserver is an open source collection of bioinformatics tools that are powerful, flexible, dynamic, and user friendly. The online nature of the Galaxy webserver and its graphical interface allow users to analyze HTS data without compiling code or installing multiple programs. Herein we describe how tools within the Galaxy webserver can be adapted to pre-process, compile, filter and analyze aptamer HTS data from multiple rounds of selection. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Company project: "Evaluation of the quality of medical records as a tool of clinical risk management"

    OpenAIRE

    Anna Santa Guzzo; Mario Tecca; Enrico Marinelli; Claudio Bontempi; Caterina Palazzo; Paolo Ursillo; Giuseppe Ferro; Anna Miani; Annunziata Salvati; Stefania Catanzaro; Massimiliano Chiarini; Domenica Vittoria Colamesta; Domenico Cacchio; Patrizia Sposato; Anna Maria Lombardi

    2017-01-01

    Introduction: The medical record was defined by the Italian Ministry of Health in 1992 as "the information tool designed to record all relevant demographic and clinical information on a patient during a single hospitalization episode". Retrospective analysis of medical records is a tool for selecting direct and indirect indicators of critical issues (organizational, management, technical and professional issues). The project’s purpose being the promotion of an evaluation and self-evaluation ...

  1. LIFE+ TRUST project: tool to assist the implementation of the Framework Directive 2000/60/CE, methodology and results

    Directory of Open Access Journals (Sweden)

    Vincenzo Marsala

    2014-09-01

    Full Text Available The TRUST project is funded by the European Commission’s by the Life+ Programme. The aim of the TRUST project is the identification of the adaption and mitigation measures to counteract the impacts of climate change on the groundwater of the Upper Plain in the Veneto and Friuli region in North-Eastern Italy. The TRUST project aims at implementing a water balance modelling tool to support institutions in formulating sustainable water management planning policies and best practices. This paper reviews the development and application of the tools for the groundwater balance model that simulate the groundwater deficit. Projections on the water deficit as a function of Climate Change have used future precipitation and evapotranspiration patterns derived from climate simulations (SRES-IPCC scenarios A1B and A2 of the Mediterranean region for the 20th and 21st centuries. Model outputs showed that a significant part of future water deficit might be recovered with Managed Aquifer Recharge that will permit the groundwater management preventing the climate change effect.

  2. Electronic Health Record Tools to Care for At-Risk Older Drivers: A Quality Improvement Project.

    Science.gov (United States)

    Casey, Colleen M; Salinas, Katherine; Eckstrom, Elizabeth

    2015-06-01

    Evaluating driving safety of older adults is an important health topic, but primary care providers (PCP) face multiple barriers in addressing this issue. The study's objectives were to develop an electronic health record (EHR)-based Driving Clinical Support Tool, train PCPs to perform driving assessments utilizing the tool, and systematize documentation of assessment and management of driving safety issues via the tool. The intervention included development of an evidence-based Driving Clinical Support Tool within the EHR, followed by training of internal medicine providers in the tool's content and use. Pre- and postintervention provider surveys and chart review of driving-related patient visits were conducted. Surveys included self-report of preparedness and knowledge to evaluate at-risk older drivers and were analyzed using paired t-test. A chart review of driving-related office visits compared documentation pre- and postintervention including: completeness of appropriate focused history and exam, identification of deficits, patient education, and reporting to appropriate authorities when indicated. Data from 86 providers were analyzed. Pre- and postintervention surveys showed significantly increased self-assessed preparedness (p < .001) and increased driving-related knowledge (p < .001). Postintervention charts showed improved documentation of correct cognitive testing, more referrals/consults, increased patient education about community resources, and appropriate regulatory reporting when deficits were identified. Focused training and an EHR-based clinical support tool improved provider self-reported preparedness and knowledge of how to evaluate at-risk older drivers. The tool improved documentation of driving-related issues and led to improved access to interdisciplinary care coordination. Published by Oxford University Press on behalf of the Gerontological Society of America 2015.

  3. MAKER2: an annotation pipeline and genome-database management tool for second-generation genome projects.

    Science.gov (United States)

    Holt, Carson; Yandell, Mark

    2011-12-22

    Second-generation sequencing technologies are precipitating major shifts with regards to what kinds of genomes are being sequenced and how they are annotated. While the first generation of genome projects focused on well-studied model organisms, many of today's projects involve exotic organisms whose genomes are largely terra incognita. This complicates their annotation, because unlike first-generation projects, there are no pre-existing 'gold-standard' gene-models with which to train gene-finders. Improvements in genome assembly and the wide availability of mRNA-seq data are also creating opportunities to update and re-annotate previously published genome annotations. Today's genome projects are thus in need of new genome annotation tools that can meet the challenges and opportunities presented by second-generation sequencing technologies. We present MAKER2, a genome annotation and data management tool designed for second-generation genome projects. MAKER2 is a multi-threaded, parallelized application that can process second-generation datasets of virtually any size. We show that MAKER2 can produce accurate annotations for novel genomes where training-data are limited, of low quality or even non-existent. MAKER2 also provides an easy means to use mRNA-seq data to improve annotation quality; and it can use these data to update legacy annotations, significantly improving their quality. We also show that MAKER2 can evaluate the quality of genome annotations, and identify and prioritize problematic annotations for manual review. MAKER2 is the first annotation engine specifically designed for second-generation genome projects. MAKER2 scales to datasets of any size, requires little in the way of training data, and can use mRNA-seq data to improve annotation quality. It can also update and manage legacy genome annotation datasets.

  4. Enhancement of the FDOT's project level and network level bridge management analysis tools

    Science.gov (United States)

    2011-02-01

    Over several years, the Florida Department of Transportation (FDOT) has been implementing the AASHTO Pontis Bridge Management System to support network-level and project-level decision making in the headquarters and district offices. Pontis is an int...

  5. Poster presented at Research Bazaar 2015 - project and digital tools overview

    OpenAIRE

    Strack, Michael

    2015-01-01

    Poster presented at the Research Bazaar 2015 at Melbourne University, Australia. Conference attendees were asked to share an overview of their project and the digital platforms they used in their research.

  6. Students’ intellectual development measures as an effective tool of personality development dynamics monitoring in project activities

    Directory of Open Access Journals (Sweden)

    Faleeva A.A.

    2017-04-01

    Full Text Available this article reveals the method of an educational technology project, which includes a set of research, problem of methods, creative by its very nature. The integration of knowledge is achieved by the method of projects. Individual style of student learning should be based on consideration of the individual characteristics of each student, mental development characteristics, temperament, type of nervous activity. It is important to show students their own interest to acquire the knowledge that they will need in life.

  7. Information System Development: Can Traditional Project Management Tools Be Successful in Post-Industrial Organizations?

    DEFF Research Database (Denmark)

    Carugati, Andrea

    2002-01-01

    Literature on project management of information systems development suggests practices based on success stories in industrial organizations. Recent trends towards post-industrial organizational forms and loosely coupled networked organizations raise questions regarding the applicability of these ...... of information systems development projects in post-industrial organizations. The guidelines are both the result of post-rationalization of the team members and of the case analysis....

  8. SO-QT: Collaborative Tool to Project the Future Space Object Population

    Science.gov (United States)

    Stupl, Jan

    2017-01-01

    Earth orbit gets increasingly congested, a challenge to space operators, both in governments and industry. We present a web tool that provides: 1) data on todays and the historic space object environments, by aggregating object-specific tracking data; and 2) future trends through a collaboration platform to collect information on planed launches. The collaborative platform enables experts to pool and compare their data in order to generate future launch scenarios. The tool is intended to support decision makers and mission designers while they investigate future missions and scholars as they develop strategies for space traffic management.

  9. EUROPEAN PROJECTS AS A TOOL FOR IMPROVING FARMERS SKILLS VIA MODERN INFORMATION TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Zuzana PALKOVA

    2013-01-01

    Full Text Available This article presents European projects with the main focus on the improving the skills and competitiveness of farmers by modern information and communication technologies and e-learning methods. Two projects – AVARES - Enhance attractiveness of renewable energy training by virtual reality and NewCAP - New European Standards in the Context of Reformed EU Common Agricultural Policy are projects under the Leonardo da Vinci Transfer ofInnovation grant scheme. They try to present new way of vocational education and training in the agrosector. The main aim of the AVARES project is to develop the multimedia learning materials for vocational education and training in the field of agricultural and rural development and application of modern information and communication technologies into vocational education and training. The emphasis is put on the application of modern ICT equipment and technologies, with the main focus on the Virtual reality, 3D visual display and e - learning 2.0 methods. New programming period 2014 – 2020 will bring significant changes within the Common Agricultural Policy (CAP which will have a serious impact on economy especially of larger beneficiaries. The „NewCAP“ project aiming at preparation of actors in rural areas to take the proposed changes in the policy through interactive educational programme.

  10. An Engineering Educator's Decision Support Tool for Improving Innovation in Student Design Projects

    Science.gov (United States)

    Ozaltin, Nur Ozge; Besterfield-Sacre, Mary; Clark, Renee M.

    2015-01-01

    Learning how to design innovatively is a critical process skill for undergraduate engineers in the 21st century. To this end, our paper discusses the development and validation of a Bayesian network decision support tool that can be used by engineering educators to make recommendations that positively impact the innovativeness of product designs.…

  11. Evaluation of Computer Tools for Idea Generation and Team Formation in Project-Based Learning

    Science.gov (United States)

    Ardaiz-Villanueva, Oscar; Nicuesa-Chacon, Xabier; Brene-Artazcoz, Oscar; Sanz de Acedo Lizarraga, Maria Luisa; Sanz de Acedo Baquedano, Maria Teresa

    2011-01-01

    The main objective of this research was to validate the effectiveness of Wikideas and Creativity Connector tools to stimulate the generation of ideas and originality by university students organized into groups according to their indexes of creativity and affinity. Another goal of the study was to evaluate the classroom climate created by these…

  12. Project Scheduling Tool for Maintaining Capability Interdependencies and Defence Program Investment: A User’s Guide

    Science.gov (United States)

    2014-09-01

    The free, open-source Integrated Development Environment (IDE) NetBeans [11] was used in the creation of the Graphical User Interface (GUI) for the tool...Oracle Corporation (2013) NetBeans IDE 7.4, http://www.netbeans.org. 12. O’Shea, K., Pong, P. & Bulluss, G. (2012) Fit-for-Purpose Visualisation of

  13. Complete Instruction and Project Book for Contracting. A Library Cooperation Tool.

    Science.gov (United States)

    Radcliffe, Walter H.; Kemper, Robert E.

    An important tool for establishing efficient total library service is contracting, which allows a unit of government or a library to obtain the use of the resources of another library according to its specific needs. A contract can cover services to be purchased, financial arrangements, administrative responsibilities, legal considerations, and…

  14. Project description: Foundations and tools for building well-behaved systems

    DEFF Research Database (Denmark)

    Katajainen, Jyrki; Elmasry, Amr; Elverkilde, Jon Daniel

    We aim at doing basic research on the theoretical foundations on how to build reliable, safe, and fast software systems, and developing tools that make the construction and maintenance of such systems easier. The theoretical questions taken up are related to algorithms, exception safety, and memory...

  15. Project GRACE A grid based search tool for the global digital library

    CERN Document Server

    Scholze, Frank; Vigen, Jens; Prazak, Petra; The Seventh International Conference on Electronic Theses and Dissertations

    2004-01-01

    The paper will report on the progress of an ongoing EU project called GRACE - Grid Search and Categorization Engine (http://www.grace-ist.org). The project participants are CERN, Sheffield Hallam University, Stockholm University, Stuttgart University, GL 2006 and Telecom Italia. The project started in 2002 and will finish in 2005, resulting in a Grid based search engine that will search across a variety of content sources including a number of electronic thesis and dissertation repositories. The Open Archives Initiative (OAI) is expanding and is clearly an interesting movement for a community advocating open access to ETD. However, the OAI approach alone may not be sufficiently scalable to achieve a truly global ETD Digital Library. Many universities simply offer their collections to the world via their local web services without being part of any federated system for archiving and even those dissertations that are provided with OAI compliant metadata will not necessarily be picked up by a centralized OAI Ser...

  16. Avoiding failure: tools for successful and sustainable quality-improvement projects

    Energy Technology Data Exchange (ETDEWEB)

    Donnelly, Lane F. [Texas Children' s Hospital, Department of Radiology, Houston, TX (United States)

    2017-06-15

    Involvement in successful and sustained quality improvement can be a very rewarding experience. However, it can be very difficult work. Up to 70% of attempted organizational change is not sustained. There are many reasons why quality-improvement projects might not be successful. In this article, the author reviews items associated with an increased or decreased likelihood of success. Such items have been categorized as structural issues, human issues and environmental context. This paper is intended to serve those embarking on quality-improvement projects as a resource to help position them for success. (orig.)

  17. Avoiding failure: tools for successful and sustainable quality-improvement projects

    International Nuclear Information System (INIS)

    Donnelly, Lane F.

    2017-01-01

    Involvement in successful and sustained quality improvement can be a very rewarding experience. However, it can be very difficult work. Up to 70% of attempted organizational change is not sustained. There are many reasons why quality-improvement projects might not be successful. In this article, the author reviews items associated with an increased or decreased likelihood of success. Such items have been categorized as structural issues, human issues and environmental context. This paper is intended to serve those embarking on quality-improvement projects as a resource to help position them for success. (orig.)

  18. Avoiding failure: tools for successful and sustainable quality-improvement projects.

    Science.gov (United States)

    Donnelly, Lane F

    2017-06-01

    Involvement in successful and sustained quality improvement can be a very rewarding experience. However, it can be very difficult work. Up to 70% of attempted organizational change is not sustained. There are many reasons why quality-improvement projects might not be successful. In this article, the author reviews items associated with an increased or decreased likelihood of success. Such items have been categorized as structural issues, human issues and environmental context. This paper is intended to serve those embarking on quality-improvement projects as a resource to help position them for success.

  19. Tools for assessing European streams with macroinvertebrates: major results and conclusions from the STAR project

    NARCIS (Netherlands)

    Verdonschot, P.F.M.; Moog, O.

    2006-01-01

    This short paper summarises the information developed in the EU funded research project STAR on autecology databases, metrics, multimetrics and community approaches. For Europe the WFD implementation gave an important stimulus for the development of ecology based assessment techniques. Along with

  20. Projection matrices as a forest management tool: an invasive tree case study

    Science.gov (United States)

    Ian J. Renne; Benjamin F. Tracy; Timothy P. Spira

    2003-01-01

    Life history parameters of many forest-dwelling species are affected by native and non-native pests. In turn, these pests alter forest processes and cost the United States billions of dollars annually. Population projection matrices can aid ecologists and managers in evaluating the impact of pests on forest species as well as devising effective strategies for pest...

  1. Overcoming Barriers between Volunteer Professionals Advising Project-Based Learning Teams with Regulation Tools

    Science.gov (United States)

    Rees Lewis, Daniel G.; Easterday, Matthew W.; Harburg, Emily; Gerber, Elizabeth M.; Riesbeck, Christopher K.

    2018-01-01

    To provide the substantial support required for project-based learning (PBL), educators can incorporate professional experts as "design coaches." However, previous work shows barriers incorporating design coaches who can rarely meet face-to-face: (1) communication online is time-consuming, (2) updating coaches online is not perceived as…

  2. DECHEM: A remedial planning tool for metallic contaminants in soil at UMTRA Project sites

    International Nuclear Information System (INIS)

    1989-03-01

    The DECHEM (DEcontamination of CHEMicals) method was developed for the Uranium Mill Tailings Remedial Action (UMTRA) Project to guide characterization and remedial planning for metals contamination in soils. This is necessary because non-radiological hazardous constituents may be more mobile than radium-226 (Ra-226), and hence may migrate more deeply into subpile soils (beneath tailings that are to be relocated) or into adjacent contaminated soils at UMTRA Project sites. The result is that remedial action to the Ra-226 excavation limit, as specified in the US Environmental Protection Agency (EPA) standards, may not adequately remove hazardous non-radiological contamination. Unmitigated, these contaminants in soil may cause health risks because of their presence in resuspended particles, their uptake by crops or fodder their seepage into aquifers used for drinking water or other possible exposure pathways. The DECHEM method was developed in response to the need for advanced planning for the remediation of chemical contaminants at UMTRA Project sites, and includes the following elements: Establishment of acceptable exposure rates for humans to chemicals, based on EPA guidelines or other toxicological literature. Modeling of chemical migration through environmental pathways from a remediated UMTRA Project site to humans. Determination of allowable residual concentrations (i.e., cleanup guidelines) for chemicals in soils that results in doses to humans that are below established acceptable exposure rates. The initial development and application of the DECHEM method has focused upon hazardous metallic contaminants such as arsenic, lead, molybdenum, and selenium, which are known to occur in elevated concentrations at some UMTRA Project sites

  3. The Use of Computer Tools in the Design Process of Students’ Architectural Projects. Case Studies in Algeria

    Science.gov (United States)

    Saighi, Ouafa; Salah Zerouala, Mohamed

    2017-12-01

    This The paper particularly deals with the way in which computer tools are used by students in their design studio’s projects. Four institutions of architecture education in Algeria are considered as a case study to evaluate the impact of such tools on student design process. This aims to inspect in depth such use, to sort out its advantages and shortcomings in order to suggest some solutions. A field survey was undertaken on a sample of students and their teachers at the same institutions. The analysed results mainly show that computer tools are highly focusing on improving the quality of drawings representation and images seeking observers’ satisfaction hence influencing their decision. Some teachers are not very keen to overuse the computer during the design phase; they prefer the “traditional” approach. This is the present situation that Algerian university is facing which leads to conflict and disagreement between students and teachers. Meanwhile, there was no doubt that computer tools have effectively contributed to improve the competitive level among students.

  4. Contributions of the SDR Task Network tool to Calibration and Validation of the NPOESS Preparatory Project instruments

    Science.gov (United States)

    Feeley, J.; Zajic, J.; Metcalf, A.; Baucom, T.

    2009-12-01

    The National Polar-orbiting Operational Environmental Satellite System (NPOESS) Preparatory Project (NPP) Calibration and Validation (Cal/Val) team is planning post-launch activities to calibrate the NPP sensors and validate Sensor Data Records (SDRs). The IPO has developed a web-based data collection and visualization tool in order to effectively collect, coordinate, and manage the calibration and validation tasks for the OMPS, ATMS, CrIS, and VIIRS instruments. This tool is accessible to the multi-institutional Cal/Val teams consisting of the Prime Contractor and Government Cal/Val leads along with the NASA NPP Mission team, and is used for mission planning and identification/resolution of conflicts between sensor activities. Visualization techniques aid in displaying task dependencies, including prerequisites and exit criteria, allowing for the identification of a critical path. This presentation will highlight how the information is collected, displayed, and used to coordinate the diverse instrument calibration/validation teams.

  5. Spin-Projected Matrix Product States: Versatile Tool for Strongly Correlated Systems.

    Science.gov (United States)

    Li, Zhendong; Chan, Garnet Kin-Lic

    2017-06-13

    We present a new wave function ansatz that combines the strengths of spin projection with the language of matrix product states (MPS) and matrix product operators (MPO) as used in the density matrix renormalization group (DMRG). Specifically, spin-projected matrix product states (SP-MPS) are constructed as [Formula: see text], where [Formula: see text] is the spin projector for total spin S and |Ψ MPS (N,M) ⟩ is an MPS wave function with a given particle number N and spin projection M. This new ansatz possesses several attractive features: (1) It provides a much simpler route to achieve spin adaptation (i.e., to create eigenfunctions of Ŝ 2 ) compared to explicitly incorporating the non-Abelian SU(2) symmetry into the MPS. In particular, since the underlying state |Ψ MPS (N,M) ⟩ in the SP-MPS uses only Abelian symmetries, one does not need the singlet embedding scheme for nonsinglet states, as normally employed in spin-adapted DMRG, to achieve a single consistent variationally optimized state. (2) Due to the use of |Ψ MPS (N,M) ⟩ as its underlying state, the SP-MPS can be closely connected to broken-symmetry mean-field states. This allows one to straightforwardly generate the large number of broken-symmetry guesses needed to explore complex electronic landscapes in magnetic systems. Further, this connection can be exploited in the future development of quantum embedding theories for open-shell systems. (3) The sum of MPOs representation for the Hamiltonian and spin projector [Formula: see text] naturally leads to an embarrassingly parallel algorithm for computing expectation values and optimizing SP-MPS. (4) Optimizing SP-MPS belongs to the variation-after-projection (VAP) class of spin-projected theories. Unlike usual spin-projected theories based on determinants, the SP-MPS ansatz can be made essentially exact simply by increasing the bond dimensions in |Ψ MPS (N,M) ⟩. Computing excited states is also simple by imposing orthogonality constraints

  6. Outage planning in nuclear power plants. A paradigm shift from an external towards an integrated project planning tool

    Energy Technology Data Exchange (ETDEWEB)

    Rosemann, Andreas [Gesellschaft fuer integrierte Systemplanung (GIS) mbH, Weinheim (Germany)

    2014-07-01

    Latest demands on nuclear plant inspections are the ongoing actualisation of the outage plan on the basis of the current work progress and current events as well as the permanent access to the current planning status and work process of all people involved in the outage. Modern EAM systems (EAM: Enterprise Application Management) made up ground on established project planning tools with regard to functionalities for scheduling work orders. A shift towards an integrated planning in the EAM system increases the efficiency in the outage planning and improves the communication of current states of planning. (orig.)

  7. Outage planning in nuclear power plants. A paradigm shift from an external towards an integrated project planning tool

    International Nuclear Information System (INIS)

    Rosemann, Andreas

    2014-01-01

    Latest demands on nuclear plant inspections are the ongoing actualisation of the outage plan on the basis of the current work progress and current events as well as the permanent access to the current planning status and work process of all people involved in the outage. Modern EAM systems (EAM: Enterprise Application Management) made up ground on established project planning tools with regard to functionalities for scheduling work orders. A shift towards an integrated planning in the EAM system increases the efficiency in the outage planning and improves the communication of current states of planning. (orig.)

  8. Energy Efficiency in Norway 1996-1999. Monitoring tools for energy efficiency in Europe: the ODYSSEE and MURE projects

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberg, Eva

    2002-05-01

    This is the national report for Norway in the EU/SAVE project ''Monitoring tools for energy efficiency in Europe: the ODYSSEE and MURE projects''. The report deals with energy use and energy efficiency in Norway 1990-1999. Final energy use per Gross Domestic Product (GDP) was reduced by approximately 1.6% per year from 1990 to 1999. The energy efficiency improvement has been calculated to 0.4% pr year, while the role of structural changes has been 1.2% pr year. A detailed sector analysis has been done, applying Laspeyres indices to attribute changes in energy use to activity, structure or intensity (efficiency). Aggregating sectors, we have found a total efficiency improvement of approximately 8 TWh from 1990 to 1999. (author)

  9. Integration of project management and systems engineering: Tools for a total-cycle environmental management system

    International Nuclear Information System (INIS)

    Blacker, P.B.; Winston, R.

    1997-01-01

    An expedited environmental management process has been developed at the Idaho National Engineering and Environmental Laboratory (INEEL). This process is one result of the Lockheed Martin commitment to the US Department of Energy to incorporate proven systems engineering practices with project management and program controls practices at the INEEL. Lockheed Martin uses a graded approach of its management, operations, and systems activities to tailor the level of control to the needs of the individual projects. The Lockheed Martin definition of systems engineering is: ''''Systems Engineering is a proven discipline that defines and manages program requirements, controls risk, ensures program efficiency, supports informed decision making, and verifies that products and services meet customer needs.'''' This paper discusses: the need for an expedited environmental management process; how the system was developed; what the system is; what the system does; and an overview of key components of the process

  10. Alignment tools used to locate a wire and a laser beam in the VISA undulator project

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, Z.; Ruland, R.; Dix, B.; Arnett, D. [Stanford Linear Accelerator Center, Menlo Park, CA (United States)

    1999-07-01

    Within the framework of the LCLS (Linac Coherent Light Source), a small experiment VISA (Visual to Infrared SASE (Self Amplified Stimulated Emission) Amplifier) is being performed at Brookhaven National Laboratory. VISA consists of four wiggler segments, each 0.99 m long. The four segments are required to be aligned to the beam axis with an rms error less than 50 {mu}m. This very demanding alignment is carried out in two steps. First the segments are fiducialized using a pulsed wire system. Then the wiggler segments are placed along a reference laser beam which coincides with the electron beam axis. In the wiggler segment fiducialization, a wire is stretched through a wiggler segment and a current pulse is sent down the wire. The deflection of the wire is monitored. The deflection gives information about the electron beam trajectory. The wire is moved until its x position, the coordinate without wire sag, is on the ideal beam trajectory. (The y position is obtained by rotating the wiggler 90 deg C.) Once the wire is on the ideal beam trajectory, the wire's location is measured relative to tooling balls on the wiggler segment. To locate the wire, a device was constructed which measures the wire position relative to tooling balls on the device. The device is called the wire finder. It will be discussed in this paper. To place the magnets along the reference laser beam, the position of the laser beam must be determined. A device which can locate the laser beam relative to tooling balls was constructed and is also discussed in this paper. This device is called the laser finder. With a total alignment error budget less than 50 {mu}m, both the fiducialization and magnet placement must be performed with errors much smaller than 50 {mu}m. It is desired to keep the errors from the wire finder and laser finder at the few {mu}m level. (authors)

  11. Web-based Tools for Educators: Outreach Activities of the Polar Radar for Ice Sheet Measurements (PRISM) Project

    Science.gov (United States)

    Braaten, D. A.; Holvoet, J. F.; Gogineni, S.

    2003-12-01

    The Radar Systems and Remote Sensing Laboratory at the University of Kansas (KU) has implemented extensive outreach activities focusing on Polar Regions as part of the Polar Radar for Ice Sheet Measurements (PRISM) project. The PRISM project is developing advanced intelligent remote sensing technology that involves radar systems, an autonomous rover, and communications systems to measure detailed ice sheet characteristics, and to determine bed conditions (frozen or wet) below active ice sheets in both Greenland and Antarctica. These measurements will provide a better understanding of the response of polar ice sheets to global climate change and the resulting impact the ice sheets will have on sea level rise. Many of the research and technological development aspects of the PRISM project, such as robotics, radar systems, climate change and exploration of harsh environments, can kindle an excitement and interest in students about science and technology. These topics form the core of our K-12 education and training outreach initiatives, which are designed to capture the imagination of young students, and prompt them to consider an educational path that will lead them to scientific or engineering careers. The K-12 PRISM outreach initiatives are being developed and implemented in a collaboration with the Advanced Learning Technology Program (ALTec) of the High Plains Regional Technology in Education Consortium (HPR*TEC). ALTec is associated with the KU School of Education, and is a well-established educational research center that develops and hosts web tools to enable teachers nationwide to network, collaborate, and share resources with other teachers. An example of an innovative and successful web interface developed by ALTec is called TrackStar. Teachers can use TrackStar over the Web to develop interactive, resource-based lessons (called tracks) on-line for their students. Once developed, tracks are added to the TrackStar database and can be accessed and modified

  12. Hydrological modeling as an evaluation tool of EURO-CORDEX climate projections and bias correction methods

    Science.gov (United States)

    Hakala, Kirsti; Addor, Nans; Seibert, Jan

    2017-04-01

    Streamflow stemming from Switzerland's mountainous landscape will be influenced by climate change, which will pose significant challenges to the water management and policy sector. In climate change impact research, the determination of future streamflow is impeded by different sources of uncertainty, which propagate through the model chain. In this research, we explicitly considered the following sources of uncertainty: (1) climate models, (2) downscaling of the climate projections to the catchment scale, (3) bias correction method and (4) parameterization of the hydrological model. We utilize climate projections at the 0.11 degree 12.5 km resolution from the EURO-CORDEX project, which are the most recent climate projections for the European domain. EURO-CORDEX is comprised of regional climate model (RCM) simulations, which have been downscaled from global climate models (GCMs) from the CMIP5 archive, using both dynamical and statistical techniques. Uncertainties are explored by applying a modeling chain involving 14 GCM-RCMs to ten Swiss catchments. We utilize the rainfall-runoff model HBV Light, which has been widely used in operational hydrological forecasting. The Lindström measure, a combination of model efficiency and volume error, was used as an objective function to calibrate HBV Light. Ten best sets of parameters are then achieved by calibrating using the genetic algorithm and Powell optimization (GAP) method. The GAP optimization method is based on the evolution of parameter sets, which works by selecting and recombining high performing parameter sets with each other. Once HBV is calibrated, we then perform a quantitative comparison of the influence of biases inherited from climate model simulations to the biases stemming from the hydrological model. The evaluation is conducted over two time periods: i) 1980-2009 to characterize the simulation realism under the current climate and ii) 2070-2099 to identify the magnitude of the projected change of

  13. Refurbishment decision support tools review—Energy and life cycle as key aspects to sustainable refurbishment projects

    International Nuclear Information System (INIS)

    Ferreira, Joaquim; Pinheiro, Manuel Duarte; Brito, Jorge de

    2013-01-01

    Europe is facing one of its most challenging crises since Great Depression and the construction sector is one of the worst affected. Refurbishment is therefore often suggested as one of the most useful solutions for the current real estate crisis in consolidated areas like the EU. On the other hand, it is imperative to construct buildings according to sustainable principles regarding economic, environmental and social issues. Therefore, proper decision-support methods are needed to help designers, investors and policy makers to choose the most sustainable solution for a refurbishment project, especially for energy retrofit works. This paper reviews the works relating to sustainable refurbishment decision-support tools which have already been developed. For this purpose we have analysed and classified 40 different methods, with particular focus on their main common aims. They are also compared with other classifications proposed. This paper further highlights the role of energy as a driving factor and discusses what other research developments are needed to create related tools for the future that could respond to actual construction requirements. - Highlights: • Sustainable refurbishment as an important challenge. • Proper decision-support methods are needed to refurbishment. • The paper reviews 40 different methods, focusing their main common aims. • The paper highlights the role of the energy as key factor to search sustainability. • It also stresses the importance of life cycle approach in refurbishment projects

  14. SECON - A tool for estimation of storage costs and storage project revenue

    International Nuclear Information System (INIS)

    Hall, O.

    1997-01-01

    The SECON model Storage ECONomics is useful for gas suppliers, storage operators, gas distributors and consumers when investigating new storage possibilities. SECON has been used within the Sydkraft group to compare cost for different types of storage and to identify the market niche for lined rock cavern (LRC) storage. In the model cost for the different storage types, salt caverns, LNG, and LRC can be compared. By using input according to market needs each storage type can be validated for a specific service e.g. peak shaving, seasonal storage or balancing. The project revenue can also be calculated. SECON includes three models for income calculation; US storage service, Trading and Avoided Supply Contract Costs. The income models calculates annual turnover, pay of time, net present value, internal rate of return and max. liquidity shortfall for the project. The SECON will facilitate sensitivity analysis both regarding cost for different services and different storage types and on the income side by using different scenarios. At the poster session SECON will be presented live and the delegates will have the opportunity to test the model. (au)

  15. The comet assay as a tool for human biomonitoring studies: the ComNet project.

    Science.gov (United States)

    Collins, Andrew; Koppen, Gudrun; Valdiglesias, Vanessa; Dusinska, Maria; Kruszewski, Marcin; Møller, Peter; Rojas, Emilio; Dhawan, Alok; Benzie, Iris; Coskun, Erdem; Moretti, Massimo; Speit, Günter; Bonassi, Stefano

    2014-01-01

    The comet assay is widely used in human biomonitoring to measure DNA damage as a marker of exposure to genotoxic agents or to investigate genoprotective effects. Studies often involve small numbers of subjects, and design may be sub-optimal in other respects. In addition, comet assay protocols in use in different laboratories vary significantly. In spite of these difficulties, it is appropriate to carry out a pooled analysis of all available comet assay biomonitoring data, in order to establish baseline parameters of DNA damage, and to investigate associations between comet assay measurements and factors such as sex, age, smoking status, nutrition, lifestyle, etc. With this as its major objective, the ComNet project has recruited almost 100 research groups willing to share datasets. Here we provide a background to this project, discussing the history of the comet assay and practical issues that can critically affect its performance. We survey its diverse applications in biomonitoring studies, including environmental and occupational exposure to genotoxic agents, genoprotection by dietary and other factors, DNA damage associated with various diseases, and intrinsic factors that affect DNA damage levels in humans. We examine in depth the quality of data from a random selection of studies, from an epidemiological and statistical point of view. Copyright © 2013 Elsevier B.V. All rights reserved.

  16. New tools for scientific learning in the EduSeis project: the e-learning experiment

    Directory of Open Access Journals (Sweden)

    A. Zollo

    2007-06-01

    Full Text Available The Educational Seismological Project (EduSeis is a scientific and educational project, the main aim of which is the development and implementation of new teaching methodologies in Earth Sciences, using seismology as a vehicle for scientific learning and awareness of earthquake risk. Within this framework, we have recently been experimenting with new learning and information approaches that are mainly aimed at a high school audience. In particular, we have designed, implemented and tested a model of an e-learning environment in a high school located in the surroundings of the Mt. Vesuvius volcano. The proposed e-learning model is built on the EduSeis concepts and educational materials (web-oriented, and is based on computer-supported collaborative learning. Ten teachers from different disciplines and fifty students at the I.T.I.S. “Majorana” technical high school (Naples have been taking part in a cooperative e-learning experiment in which the students have been working in small groups (communities. The learning process is assisted and supervised by the teachers. The evaluation of the results from this cooperative e-learning experiment has provided useful insights into the content and didactic value of the EduSeis modules and activities. The use of network utilities and the “Learning Community” approach promoted the exchange of ideas and expertises between students and teachers and allowed a new approach to the seismology teaching through a multidisciplinary study.

  17. Adapting the Consolidated Framework for Implementation Research to Create Organizational Readiness and Implementation Tools for Project ECHO.

    Science.gov (United States)

    Serhal, Eva; Arena, Amanda; Sockalingam, Sanjeev; Mohri, Linda; Crawford, Allison

    2018-03-01

    The Project Extension for Community Healthcare Outcomes (ECHO) model expands primary care provider (PCP) capacity to manage complex diseases by sharing knowledge, disseminating best practices, and building a community of practice. The model has expanded rapidly, with over 140 ECHO projects currently established globally. We have used validated implementation frameworks, such as Damschroder's (2009) Consolidated Framework for Implementation Research (CFIR) and Proctor's (2011) taxonomy of implementation outcomes, combined with implementation experience to (1) create a set of questions to assess organizational readiness and suitability of the ECHO model and (2) provide those who have determined ECHO is the correct model with a checklist to support successful implementation. A set of considerations was created, which adapted and consolidated CFIR constructs to create ECHO-specific organizational readiness questions, as well as a process guide for implementation. Each consideration was mapped onto Proctor's (2011) implementation outcomes, and questions relating to the constructs were developed and reviewed for clarity. The Preimplementation list included 20 questions; most questions fall within Proctor's (2001) implementation outcome domains of "Appropriateness" and "Acceptability." The Process Checklist is a 26-item checklist to help launch an ECHO project; items map onto the constructs of Planning, Engaging, Executing, Reflecting, and Evaluating. Given that fidelity to the ECHO model is associated with robust outcomes, effective implementation is critical. These tools will enable programs to work through key considerations to implement a successful Project ECHO. Next steps will include validation with a diverse sample of ECHO projects.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited

  18. Neural network based pattern matching and spike detection tools and services--in the CARMEN neuroinformatics project.

    Science.gov (United States)

    Fletcher, Martyn; Liang, Bojian; Smith, Leslie; Knowles, Alastair; Jackson, Tom; Jessop, Mark; Austin, Jim

    2008-10-01

    In the study of information flow in the nervous system, component processes can be investigated using a range of electrophysiological and imaging techniques. Although data is difficult and expensive to produce, it is rarely shared and collaboratively exploited. The Code Analysis, Repository and Modelling for e-Neuroscience (CARMEN) project addresses this challenge through the provision of a virtual neuroscience laboratory: an infrastructure for sharing data, tools and services. Central to the CARMEN concept are federated CARMEN nodes, which provide: data and metadata storage, new, thirdparty and legacy services, and tools. In this paper, we describe the CARMEN project as well as the node infrastructure and an associated thick client tool for pattern visualisation and searching, the Signal Data Explorer (SDE). We also discuss new spike detection methods, which are central to the services provided by CARMEN. The SDE is a client application which can be used to explore data in the CARMEN repository, providing data visualization, signal processing and a pattern matching capability. It performs extremely fast pattern matching and can be used to search for complex conditions composed of many different patterns across the large datasets that are typical in neuroinformatics. Searches can also be constrained by specifying text based metadata filters. Spike detection services which use wavelet and morphology techniques are discussed, and have been shown to outperform traditional thresholding and template based systems. A number of different spike detection and sorting techniques will be deployed as services within the CARMEN infrastructure, to allow users to benchmark their performance against a wide range of reference datasets.

  19. A practical guide to applying lean tools and management principles to health care improvement projects.

    Science.gov (United States)

    Simon, Ross W; Canacari, Elena G

    2012-01-01

    Manufacturing organizations have used Lean management principles for years to help eliminate waste, streamline processes, and cut costs. This pragmatic approach to structured problem solving can be applied to health care process improvement projects. Health care leaders can use a step-by-step approach to document processes and then identify problems and opportunities for improvement using a value stream process map. Leaders can help a team identify problems and root causes and consider additional problems associated with methods, materials, manpower, machinery, and the environment by using a cause-and-effect diagram. The team then can organize the problems identified into logical groups and prioritize the groups by impact and difficulty. Leaders must manage action items carefully to instill a sense of accountability in those tasked to complete the work. Finally, the team leaders must ensure that a plan is in place to hold the gains. Copyright © 2012 AORN, Inc. Published by Elsevier Inc. All rights reserved.

  20. USING WEBGIS AND CLOUD TOOLS TO PROMOTE CULTURAL HERITAGE DISSEMINATION: THE HISTORIC UP PROJECT

    Directory of Open Access Journals (Sweden)

    A. Tommasi

    2017-05-01

    Full Text Available On the occasion of the First World War centennial, GeoSNav Lab (Geodesy and Satellite Navigation Laboratory, Department of Engineering and Architecture, University of Trieste, Italy, in coooperation with Radici&Futuro Association, Trieste, Italy, carried out an educational Project named “Historic Up” involving a group of students from “F. Petrarca” High School of Trieste, Italy. The main goal of the project is to make available to students of Middle and High Schools a set of historical and cultural contents in a simple and immediate way, through the production of a virtual and interactive tour following the event that caused the burst of the First World War: the assassination of Franz Ferdinand and his wife Sofia in Sarajevo occurred on June 28, 1914. A set of Google Apps was used, including Google Earth, Maps, Tour Builder, Street View, Gmail, Drive, and Docs. The Authors instructed the students about software and team-working and supported them along the research. After being checked, all the historical and geographic data have been uploaded on a Google Tour Builder to create a sequence of historical checkpoints. Each checkpoint has texts, pictures and videos that connect the tour-users to 1914. Moreover, GeoSNaV Lab researchers produced a KML (Keyhole Markup Language file, formed by several polylines and points, representing the itinerary of the funeral procession that has been superimposed on ad-hoc georeferenced historical maps. This tour, freely available online, starts with the arrival of the royals, on June 28th 1914, and follows the couple along the events, from the assassination to the burial in Arstetten (Austria, including their passages through Trieste (Italy, Ljubljana (Slovenia, Graz and Wien (Austria.

  1. Using Webgis and Cloud Tools to Promote Cultural Heritage Dissemination: the Historic up Project

    Science.gov (United States)

    Tommasi, A.; Cefalo, R.; Zardini, F.; Nicolaucig, M.

    2017-05-01

    On the occasion of the First World War centennial, GeoSNav Lab (Geodesy and Satellite Navigation Laboratory), Department of Engineering and Architecture, University of Trieste, Italy, in coooperation with Radici&Futuro Association, Trieste, Italy, carried out an educational Project named "Historic Up" involving a group of students from "F. Petrarca" High School of Trieste, Italy. The main goal of the project is to make available to students of Middle and High Schools a set of historical and cultural contents in a simple and immediate way, through the production of a virtual and interactive tour following the event that caused the burst of the First World War: the assassination of Franz Ferdinand and his wife Sofia in Sarajevo occurred on June 28, 1914. A set of Google Apps was used, including Google Earth, Maps, Tour Builder, Street View, Gmail, Drive, and Docs. The Authors instructed the students about software and team-working and supported them along the research. After being checked, all the historical and geographic data have been uploaded on a Google Tour Builder to create a sequence of historical checkpoints. Each checkpoint has texts, pictures and videos that connect the tour-users to 1914. Moreover, GeoSNaV Lab researchers produced a KML (Keyhole Markup Language) file, formed by several polylines and points, representing the itinerary of the funeral procession that has been superimposed on ad-hoc georeferenced historical maps. This tour, freely available online, starts with the arrival of the royals, on June 28th 1914, and follows the couple along the events, from the assassination to the burial in Arstetten (Austria), including their passages through Trieste (Italy), Ljubljana (Slovenia), Graz and Wien (Austria).

  2. An integrated management tool for rockfall evaluation along transportation corridors: the ParaChute research project

    Science.gov (United States)

    Cloutier, Catherine; Locat, Jacques; Mayers, Mélanie; Noël, François; Turmel, Dominique; Jacob, Chantal; Dorval, Pierre; Bossé, François; Gionet, Pierre; Jaboyedoff, Michel

    2016-04-01

    Rockfall is a significant hazard along linear infrastructures due to the presence of natural and man-made rock slopes. Knowing where the problematic rockfalls source areas are is of primary importance to properly manage and mitigate the risk associated to rockfall along linear infrastructures. The aim of the ParaChute research project is to integrate various technologies into a workflow for rockfall characterization for such infrastructures, using a 220 km-long railroad as the study site which is located on Québec's North Shore, Canada. The objectives of this 3-year project which started in 2014 are: (1) to optimize the use of terrestrial, mobile and airborne laser scanners data into terrain analysis, structural geology analysis and rockfall susceptibility rating, (2) to further develop the use of unmanned aerial vehicles (UAV) for photogrammetry applied to rock cliff characterization, and (3) to integrate rockfall simulation studies into a rock slope classification system similar to the Rockfall Hazard Rating System. Firstly, based on laser scanner data and aerial photographs, the morpho-structural features of the terrain (genetic material, landform, drainage, etc.) are mapped. The result can be used to assess all types of mass movements. Secondly, to guide field work and decrease uncertainty of various parameters, systematic rockfall simulations and a first structural analysis are made from point clouds acquired by mobile and airborne laser scanner. The simulation results are used to recognize the rock slopes that have potentially problematic rockfall paths, meaning they could reach the linear infrastructure. Other rock slopes are not included in the inventory. Field work is carried out to validate and complete the rock slopes characterization previously made from remote sensing technique. Because some or parts of cliffs are not visible or accessible from the railroad, we are currently developing the use of photogrammetry by UAV in order to complete the

  3. NERI PROJECT 99-119. TASK 1. ADVANCED CONTROL TOOLS AND METHODS. FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    March-Leuba, J.A.

    2002-09-09

    Nuclear plants of the 21st century will employ higher levels of automation and fault tolerance to increase availability, reduce accident risk, and lower operating costs. Key developments in control algorithms, fault diagnostics, fault tolerance, and communication in a distributed system are needed to implement the fully automated plant. Equally challenging will be integrating developments in separate information and control fields into a cohesive system, which collectively achieves the overall goals of improved performance, safety, reliability, maintainability, and cost-effectiveness. Under the Nuclear Energy Research Initiative (NERI), the U. S. Department of Energy is sponsoring a project to address some of the technical issues involved in meeting the long-range goal of 21st century reactor control systems. This project, ''A New Paradigm for Automated Development Of Highly Reliable Control Architectures For Future Nuclear Plants,'' involves researchers from Oak Ridge National Laboratory, University of Tennessee, and North Carolina State University. This paper documents a research effort to develop methods for automated generation of control systems that can be traced directly to the design requirements. Our final goal is to allow the designer to specify only high-level requirements and stress factors that the control system must survive (e.g. a list of transients, or a requirement to withstand a single failure.) To this end, the ''control engine'' automatically selects and validates control algorithms and parameters that are optimized to the current state of the plant, and that have been tested under the prescribed stress factors. The control engine then automatically generates the control software from validated algorithms. Examples of stress factors that the control system must ''survive'' are: transient events (e.g., set-point changes, or expected occurrences such a load rejection,) and postulated

  4. SNiPlay: a web-based tool for detection, management and analysis of SNPs. Application to grapevine diversity projects.

    Science.gov (United States)

    Dereeper, Alexis; Nicolas, Stéphane; Le Cunff, Loïc; Bacilieri, Roberto; Doligez, Agnès; Peros, Jean-Pierre; Ruiz, Manuel; This, Patrice

    2011-05-05

    High-throughput re-sequencing, new genotyping technologies and the availability of reference genomes allow the extensive characterization of Single Nucleotide Polymorphisms (SNPs) and insertion/deletion events (indels) in many plant species. The rapidly increasing amount of re-sequencing and genotyping data generated by large-scale genetic diversity projects requires the development of integrated bioinformatics tools able to efficiently manage, analyze, and combine these genetic data with genome structure and external data. In this context, we developed SNiPlay, a flexible, user-friendly and integrative web-based tool dedicated to polymorphism discovery and analysis. It integrates:1) a pipeline, freely accessible through the internet, combining existing softwares with new tools to detect SNPs and to compute different types of statistical indices and graphical layouts for SNP data. From standard sequence alignments, genotyping data or Sanger sequencing traces given as input, SNiPlay detects SNPs and indels events and outputs submission files for the design of Illumina's SNP chips. Subsequently, it sends sequences and genotyping data into a series of modules in charge of various processes: physical mapping to a reference genome, annotation (genomic position, intron/exon location, synonymous/non-synonymous substitutions), SNP frequency determination in user-defined groups, haplotype reconstruction and network, linkage disequilibrium evaluation, and diversity analysis (Pi, Watterson's Theta, Tajima's D).Furthermore, the pipeline allows the use of external data (such as phenotype, geographic origin, taxa, stratification) to define groups and compare statistical indices.2) a database storing polymorphisms, genotyping data and grapevine sequences released by public and private projects. It allows the user to retrieve SNPs using various filters (such as genomic position, missing data, polymorphism type, allele frequency), to compare SNP patterns between populations, and to

  5. SF Box--a tool for evaluating the effects on soil functions in remediation projects.

    Science.gov (United States)

    Volchko, Yevheniya; Norrman, Jenny; Rosén, Lars; Norberg, Tommy

    2014-10-01

    Although remediation is usually aimed at reducing the risks posed by contaminants to human health and the environment, it is also desirable that the remediated soil within future green spaces is capable of providing relevant ecological functions, e.g., basis for primary production. Yet while addressing a contamination problem by reducing contaminant concentration and/or amounts in the soil, the remedial action itself can lead to soil structure disturbances, decline in organic matter and nutrient deficiencies, and in turn affect a soil's capacity to carry out its ecological soil functions. This article presents the Soil Function Box (SF Box) tool that is aimed to facilitate integration of information from suggested soil quality indicators (SQIs) into a management process in remediation using a scoring method. The scored SQIs are integrated into a soil quality index corresponding to 1 of 5 classes. SF Box is applied to 2 cases from Sweden (Kvillebäcken and Hexion), explicitly taking into consideration uncertainties in the results by means of Monte Carlo simulations. At both sites the generated soil quality indices corresponded to a medium soil performance (soil class 3) with a high certainty. The main soil constraints at both Kvillebäcken and Hexion were associated with biological activity in the soil, as soil organisms were unable to supply plant-available N. At the Kvillebäcken site the top layer had a content of coarse fragment (ø > 2 mm) higher than 35%, indicating plant rooting limitations. At the Hexion site, the soil had limited amount of organic matter, thus poor aggregate stability and nutrient cycling potential. In contrast, the soil at Kvillebäcken was rich in organic matter. The soils at both sites were capable of storing a sufficient amount of water for soil organisms between precipitation events. © 2014 SETAC.

  6. Application of Deterministic and Probabilistic System Design Methods and Enhancements of Conceptual Design Tools for ERA Project

    Science.gov (United States)

    Mavris, Dimitri N.; Schutte, Jeff S.

    2016-01-01

    This report documents work done by the Aerospace Systems Design Lab (ASDL) at the Georgia Institute of Technology, Daniel Guggenheim School of Aerospace Engineering for the National Aeronautics and Space Administration, Aeronautics Research Mission Directorate, Integrated System Research Program, Environmentally Responsible Aviation (ERA) Project. This report was prepared under contract NNL12AA12C, "Application of Deterministic and Probabilistic System Design Methods and Enhancement of Conceptual Design Tools for ERA Project". The research within this report addressed the Environmentally Responsible Aviation (ERA) project goal stated in the NRA solicitation "to advance vehicle concepts and technologies that can simultaneously reduce fuel burn, noise, and emissions." To identify technology and vehicle solutions that simultaneously meet these three metrics requires the use of system-level analysis with the appropriate level of fidelity to quantify feasibility, benefits and degradations, and associated risk. In order to perform the system level analysis, the Environmental Design Space (EDS) [Kirby 2008, Schutte 2012a] environment developed by ASDL was used to model both conventional and unconventional configurations as well as to assess technologies from the ERA and N+2 timeframe portfolios. A well-established system design approach was used to perform aircraft conceptual design studies, including technology trade studies to identify technology portfolios capable of accomplishing the ERA project goal and to obtain accurate tradeoffs between performance, noise, and emissions. The ERA goal, shown in Figure 1, is to simultaneously achieve the N+2 benefits of a cumulative noise margin of 42 EPNdB relative to stage 4, a 75 percent reduction in LTO NOx emissions relative to CAEP 6 and a 50 percent reduction in fuel burn relative to the 2005 best in class aircraft. There were 5 research task associated with this research: 1) identify technology collectors, 2) model

  7. The PEcAn Project: Accessible Tools for On-demand Ecosystem Modeling

    Science.gov (United States)

    Cowdery, E.; Kooper, R.; LeBauer, D.; Desai, A. R.; Mantooth, J.; Dietze, M.

    2014-12-01

    observations of vegetation composition and structure. The processing of heterogeneous met and veg data within PEcAn is made possible using the Brown Dog cyberinfrastructure tools for unstructured data.

  8. A highly redundant BAC library of Atlantic salmon (Salmo salar: an important tool for salmon projects

    Directory of Open Access Journals (Sweden)

    Koop Ben F

    2005-04-01

    Full Text Available Abstract Background As farming of Atlantic salmon is growing as an aquaculture enterprise, the need to identify the genomic mechanisms for specific traits is becoming more important in breeding and management of the animal. Traits of importance might be related to growth, disease resistance, food conversion efficiency, color or taste. To identify genomic regions responsible for specific traits, genomic large insert libraries have previously proven to be of crucial importance. These large insert libraries can be screened using gene or genetic markers in order to identify and map regions of interest. Furthermore, large-scale mapping can utilize highly redundant libraries in genome projects, and hence provide valuable data on the genome structure. Results Here we report the construction and characterization of a highly redundant bacterial artificial chromosome (BAC library constructed from a Norwegian aquaculture strain male of Atlantic salmon (Salmo salar. The library consists of a total number of 305 557 clones, in which approximately 299 000 are recombinants. The average insert size of the library is 188 kbp, representing 18-fold genome coverage. High-density filters each consisting of 18 432 clones spotted in duplicates have been produced for hybridization screening, and are publicly available 1. To characterize the library, 15 expressed sequence tags (ESTs derived overgos and 12 oligo sequences derived from microsatellite markers were used in hybridization screening of the complete BAC library. Secondary hybridizations with individual probes were performed for the clones detected. The BACs positive for the EST probes were fingerprinted and mapped into contigs, yielding an average of 3 contigs for each probe. Clones identified using genomic probes were PCR verified using microsatellite specific primers. Conclusion Identification of genes and genomic regions of interest is greatly aided by the availability of the CHORI-214 Atlantic salmon BAC

  9. Design and analysis of an original powered foot clearance creator mechanism for walking in patients with spinal cord injury.

    Science.gov (United States)

    Maleki, Maryam; Badri, Samaneh; Shayestehepour, Hamed; Arazpour, Mokhtar; Farahmand, Farzam; Mousavi, Mohamad Ebrahim; Abdolahi, Ehsan; Farkhondeh, Hasan; Head, John S; Golchin, Navid; Mardani, Mohammad Ali

    2018-03-12

    The aim of this study was to assess the performance of an original powered foot clearance creator (PFCC) mechanism worn in conjunction with an isocentric reciprocal gait orthosis (IRGO) and evaluate its effect on trunk compensatory movements and spatiotemporal parameters in nine healthy subjects. A PFCC motorized mechanism was designed that incorporated twin sole plates, the movements of which enabled increased toe to floor clearance during swing phase. A prototype was constructed in combination with an IRGO, and hence was re-named as an IRGO-PFCC orthosis. The effects of IRGO-PFCC usage on the spatiotemporal parameters and trunk compensatory movements during walking were then analyzed under two conditions, firstly with the PFCC 'active' i.e., with the motorized device functioning, and secondly inactive, where floor clearance was standard. Ambulating with IRGO-PFCC orthosis resulted in reduction in the spatiotemporal parameters of gait (speed of walking, cadence and stride length) in nine healthy subjects. Walking with IRGO-PFCC orthosis led to significant differences in lateral (p = .007) and vertical (p = .008) trunk compensatory movements. In other words, through using IRGO-PFCC orthosis, the lateral and vertical trunk compensatory movements decreased by 51.32% and 42.7%, respectively. An adapted PFCC mechanism, with a relatively small motor and power supply could effectively increase toe to floor clearance during swing phase and thereby decrease trunk compensatory motions and potentially improve energy consumption. Implications for rehabilitations •The High rejection rates of reciprocal gait orthoses are related to the increasing in energy expenditure and burden loads on the upper limb joints during walking following trunk compensatory movements.•An original powered foot clearance creator mechanism was designed and constructed to assisting floor clearance capability and reduce trunk compensatory movements in subjects with spinal cord injury during

  10. Performers Creators and Audience: Co-Participants in an Interconnected Model of Performance and Creative Process

    Science.gov (United States)

    Brooks, Pauline

    2014-01-01

    This article reflects upon the process of creating dance in an intermedial telematic dance setting with university students. Some contextualisation is made of five telematic dance projects (the "Phillypool Projects 2007-2012") that have taken place between two universities, one in the UK and one in the US. It will explore some of the…

  11. Young users and the digital divide: readers, participants or creators on Internet?

    OpenAIRE

    Ballano, S. (Sonia); Uribe, A.C. (Ana-Cynthia); Munté-Ramos, R.A. (Rosa-Àuria)

    2014-01-01

    This article analyses how young people, parents and teachers perceive the uses of digital tools and environments made by those known as digital natives. The research combines analysis of an extensive bibliography on the subject with the results of field research based on 30 focus groups, involving 120 youngsters and 60 adults in five Spanish cities, within the framework of a national study. The results show that while adults consider that young people use technological tools in complex ways d...

  12. Developing a User-Centred Planning Tool for Young Adults with Development Disorders: A Research-Based Teaching Project.

    Science.gov (United States)

    Ribu, Kirsten; Patel, Tulpesh

    2016-01-01

    People with development disorders, for instance autism, need structured plans to help create predictability in their daily lives. Digital plans can facilitate enhanced independency, learning, and quality of life, but existing apps are largely general purpose and lack the flexibility required by this specific but heterogeneous user group. Universal design is both a goal and a process and should be based on a holistic approach and user-centered design, interacting with the users in all stages of the development process. At Oslo and Akershus University College (HiOA) we conducted a research-based teaching project in co-operation with the Department of Neuro-habilitation at Oslo University Hospital (OUS) with two employees acting as project managers and students as developers. Three groups of Computer Science bachelor students developed digital prototypes for a planning tool for young adults with pervasive development disorders, who live either with their families or in supervised residences, and do not receive extensive public services. The students conducted the initial planning phase of the software development process, focusing on prototyping the system requirements, whilst a professional software company programmed the end solution. The goal of the project was to develop flexible and adaptive user-oriented and user-specific app solutions for tablets that can aid this diverse user group in structuring daily life, whereby, for example, photos of objects and places known to the individual user replace general pictures or drawings, and checklists can be elaborate or sparse as necessary. The three student groups worked independently of each other and created interactive working prototypes based on tests, observations and short interviews with end users (both administrators and residents) and regular user feedback from the project managers. Three very different solutions were developed that were of high enough quality that an external software company were able to

  13. Teachers' Perceptions of Esri Story Maps as Effective Teaching Tools

    Science.gov (United States)

    Strachan, Caitlin; Mitchell, Jerry

    2014-01-01

    The current study explores teachers' perceptions of Esri Story Maps as effective teaching tools. Story Maps are a relatively new web application created using Esri's cloud-based GIS platform, ArcGIS Online. They combine digitized, dynamic web maps with other story elements to help the creator effectively convey a message. The relative ease…

  14. Making Contact: The NAMES Project in Comparison to the Vietnam Memorial.

    Science.gov (United States)

    Jensen, Marvin D.

    Several principles of gestalt therapy are applied in an analysis of the similarities between the Vietnam Veterans Memorial and The NAMES Project Quilt. The NAMES Project Quilt memorializes people who have died of Acquired Immune Deficiency Syndrome (AIDS). The creators of the two memorials engaged in the initial searches for "whole"…

  15. Climate Project Screening Tool

    Science.gov (United States)

    Forest Service U.S. Department of Agriculture

    2011-01-01

    Climate change poses a challenge for resource managers as they review current management practices. Adaptation is a critical means of addressing climate change in the near future because, due to inherent time lags in climate impacts, the effects of increased atmospheric greenhouse gases will be felt for decades even if effective mitigation begins now. To address the...

  16. Overview of the Systems Analysis Framework for the EU Bioeconomy. Deliverable 1.4 of the EU FP 7 SAT-BBE project Systems Analysis Tools Framework for the EU Bio-Based Economy Strategy (SAT BBE)

    NARCIS (Netherlands)

    Leeuwen, van M.G.A.; Meijl, van H.; Smeets, E.M.W.; Tabeau-Kowalska, E.W.

    2014-01-01

    In November 2012 the Systems Analysis Tools Framework for the EU Bio-Based Economy Strategy project (SAT-BBE) was launched with the purpose to design an analysis tool useful to monitoring the evolution and impacts of the bioeconomy. In the SAT-BBE project the development of the analysis tool for the

  17. Mapping Application for Penguin Populations and Projected Dynamics (MAPPPD): Data and Tools for Dynamic Management and Decision Support

    Science.gov (United States)

    Humphries, G. R. W.; Naveen, R.; Schwaller, M.; Che-Castaldo, C.; McDowall, P.; Schrimpf, M.; Schrimpf, Michael; Lynch, H. J.

    2017-01-01

    The Mapping Application for Penguin Populations and Projected Dynamics (MAPPPD) is a web-based, open access, decision-support tool designed to assist scientists, non-governmental organizations and policy-makers working to meet the management objectives as set forth by the Commission for the Conservation of Antarctic Marine Living Resources (CCAMLR) and other components of the Antarctic Treaty System (ATS) (that is, Consultative Meetings and the ATS Committee on Environmental Protection). MAPPPD was designed specifically to complement existing efforts such as the CCAMLR Ecosystem Monitoring Program (CEMP) and the ATS site guidelines for visitors. The database underlying MAPPPD includes all publicly available (published and unpublished) count data on emperor, gentoo, Adelie) and chinstrap penguins in Antarctica. Penguin population models are used to assimilate available data into estimates of abundance for each site and year.Results are easily aggregated across multiple sites to obtain abundance estimates over any user-defined area of interest. A front end web interface located at www.penguinmap.com provides free and ready access to the most recent count and modelled data, and can act as a facilitator for data transfer between scientists and Antarctic stakeholders to help inform management decisions for the continent.

  18. FAF-Drugs2: free ADME/tox filtering tool to assist drug discovery and chemical biology projects.

    Science.gov (United States)

    Lagorce, David; Sperandio, Olivier; Galons, Hervé; Miteva, Maria A; Villoutreix, Bruno O

    2008-09-24

    Drug discovery and chemical biology are exceedingly complex and demanding enterprises. In recent years there are been increasing awareness about the importance of predicting/optimizing the absorption, distribution, metabolism, excretion and toxicity (ADMET) properties of small chemical compounds along the search process rather than at the final stages. Fast methods for evaluating ADMET properties of small molecules often involve applying a set of simple empirical rules (educated guesses) and as such, compound collections' property profiling can be performed in silico. Clearly, these rules cannot assess the full complexity of the human body but can provide valuable information and assist decision-making. This paper presents FAF-Drugs2, a free adaptable tool for ADMET filtering of electronic compound collections. FAF-Drugs2 is a command line utility program (e.g., written in Python) based on the open source chemistry toolkit OpenBabel, which performs various physicochemical calculations, identifies key functional groups, some toxic and unstable molecules/functional groups. In addition to filtered collections, FAF-Drugs2 can provide, via Gnuplot, several distribution diagrams of major physicochemical properties of the screened compound libraries. We have developed FAF-Drugs2 to facilitate compound collection preparation, prior to (or after) experimental screening or virtual screening computations. Users can select to apply various filtering thresholds and add rules as needed for a given project. As it stands, FAF-Drugs2 implements numerous filtering rules (23 physicochemical rules and 204 substructure searching rules) that can be easily tuned.

  19. Application of Standard Project Management Tools to Research--A Case Study from a Multi-National Clinical Trial

    Science.gov (United States)

    Gist, Peter; Langley, David

    2007-01-01

    PRINCE2, which stands for Projects in Controlled Environments, is a project management method covering the organisation, management, and control of projects and is widely used in both government and commercial IT and building projects in the UK. This paper describes the application of PRINCE2 to the management of large clinical trials…

  20. Tools to Make Online Students and Community Partners in a Service Learning Project More "AT-EASE"--Evidence from a Finance Class

    Science.gov (United States)

    Butchey, Deanne

    2014-01-01

    The impact of service learning as a pedagogy to ensure efficient and effective experiential learning is well recognized, but in business schools, there is a perception that a steep learning curve exists for the students, faculty, and community. We use a tool to motivate and build competence in participants of a service learning project undertaken…

  1. Fuels planning: science synthesis and integration; environmental consequences fact sheet 12: Water Erosion Prediction Project (WEPP) Fuel Management (FuMe) tool

    Science.gov (United States)

    William Elliot; David Hall

    2005-01-01

    The Water Erosion Prediction Project (WEPP) Fuel Management (FuMe) tool was developed to estimate sediment generated by fuel management activities. WEPP FuMe estimates sediment generated for 12 fuel-related conditions from a single input. This fact sheet identifies the intended users and uses, required inputs, what the model does, and tells the user how to obtain the...

  2. Advantages of using 3D design tools in the nuclear power plants projects; Ventajas del uso de herramientas de diseno 3D en los proyectos de centrales nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Roldan, P.; Melendro, J.; Gomez, A.; Hermana, I.

    2011-07-01

    It there is anything that distinguished Iberdrola Ingeneria y Construccion, as part of the Iberdrola Group, it is its firm commitment to innovation and continuous improvement. This is the philosophy that led the company to its interest in three-dimensional design tools back when they were in an early stage of development : very little international implementation, lack of integration with other applications, absence of previous experiences to understand the best possible configuration for each case, etc. Nevertheless, the company was able to see the tremendous advantage of having a construction program in the early months of a project- a detailed program that could predict, and therefore avoid, the problems that, if not anticipated, would arise in the construction phase when they result in higher costs, longer time frames and a multitude of complications. This is precisely what 3D design tools offer prediction and this has been proven in the latest combined cycle projects executed with these tools. A project executed without errors not only decreases cost and time overruns, but also necessarily increases the quality of the end result. Efficiency and quality: these are both basic goals of Iberdrola Ingenieria y Construccion. The knowledge of and skill in the use of these tools have grown at the same time that their development has reached increasingly higher levels. As a result, Iberdrola Ingenieria y Conctruccion now has intensive experience in the use of 3D design tools and is preprared for the future challenges posed by these tools, the capabilities of which have attained such heights that it is possible to take on one of the most technically challenging projects that exists a nuclear power plant. And we are ready. (Author)

  3. FAF-Drugs2: Free ADME/tox filtering tool to assist drug discovery and chemical biology projects

    Directory of Open Access Journals (Sweden)

    Miteva Maria A

    2008-09-01

    Full Text Available Abstract Background Drug discovery and chemical biology are exceedingly complex and demanding enterprises. In recent years there are been increasing awareness about the importance of predicting/optimizing the absorption, distribution, metabolism, excretion and toxicity (ADMET properties of small chemical compounds along the search process rather than at the final stages. Fast methods for evaluating ADMET properties of small molecules often involve applying a set of simple empirical rules (educated guesses and as such, compound collections' property profiling can be performed in silico. Clearly, these rules cannot assess the full complexity of the human body but can provide valuable information and assist decision-making. Results This paper presents FAF-Drugs2, a free adaptable tool for ADMET filtering of electronic compound collections. FAF-Drugs2 is a command line utility program (e.g., written in Python based on the open source chemistry toolkit OpenBabel, which performs various physicochemical calculations, identifies key functional groups, some toxic and unstable molecules/functional groups. In addition to filtered collections, FAF-Drugs2 can provide, via Gnuplot, several distribution diagrams of major physicochemical properties of the screened compound libraries. Conclusion We have developed FAF-Drugs2 to facilitate compound collection preparation, prior to (or after experimental screening or virtual screening computations. Users can select to apply various filtering thresholds and add rules as needed for a given project. As it stands, FAF-Drugs2 implements numerous filtering rules (23 physicochemical rules and 204 substructure searching rules that can be easily tuned.

  4. Low-energy electron beam proximity projection lithography (LEEPL): the world's first e-beam production tool, LEEPL 3000

    Science.gov (United States)

    Behringer, Uwe F. W.

    2004-06-01

    In June 2000 ago the company Accretech and LEEPL corporation decided to develop an E-beam lithography tool for high throughput wafer exposure, called LEEPL. In an amazing short time the alpha tool was built. In 2002 the beta tool was installed at Accretech. Today the first production tool the LEEPL 3000 is ready to be shipped. The 2keV E-beam tool will be used in the first lithography strategy to expose (in mix and match mode with optical exposure tools) critical levels like gate structures, contact holes (CH), and via pattern of the 90 nm and 65 nm node. At the SEMATECH EPL workshop on September 22nd in Cambridge, England it was mentioned that the amount of these levels will increase very rapidly (8 in 2007; 13 in 2010 and 17 in 2013). The schedule of the production tool for 45 nm node is mid 2005 and for the 32 nm node 2008. The Figure 1 shows from left to right α-tool, the β-tool and the production tool LEEPL 3000. Figure 1 also shows the timetable of the 4 LEEPL forum all held in Japan.

  5. Building the future of healthcare. Part III: managing the build. Hospital leaders are moving forward using specialized IT tools to help them manage today's complex new-construction projects.

    Science.gov (United States)

    Lawrence, Daphne

    2010-05-01

    Hospital leaders are increasing making use of project management information systems (PMIS), which are built around documentation and communication of project-specific information. PMIS solutions are being applied to the daunting challenge of managing the large volumes of information involved in new construction projects. Project management tools usually utilize a portal. These tools can interface with administrative systems for best effect. CIOs and other senior executives emphasize that good leadership and execution are fundamental to success, and that automated project management tools are supports, not substitutes for good strategic planning and execution.

  6. Fighting the fan sub war: Conflicts between media rights holders and unauthorized creator/distributor networks

    Directory of Open Access Journals (Sweden)

    Mikhail Koulikov

    2010-09-01

    Full Text Available The way Japanese animation has been spread outside Japan not only by entertainment companies but also by fan groups that have worked to produce fan subs—that is, subtitled translations of films and television shows produced without authorization and shared outside established commercial channels—has been one of the most powerful examples of transformative culture to take place in the last three decades or so. Much has already been written about anime and its global impact, but the process of fan sub creation and distribution, and in particular how these groups have been structured, has not yet been examined in depth. A question that is becoming prominent concerns what happens when the fan subbing culture finally clashes with authorized commercial content distributors. This essay explores the way fan sub distribution has changed over the years and draws on the concept of Net war to illustrate the conflict and the potential tools and methods animation distribution companies have used to engage, subvert, and interdict these groups. This has broad implications for understanding and predicting the flow of other emerging conflicts between networked actors, such as hackers, anarchists, and activists, and hierarchically organized traditional corporate entities.

  7. [Personality and work of Florence Nightingale--creator of modern nursing and public health pioneer].

    Science.gov (United States)

    Milutinović, Dragana; Sumonja, Sanja; Maksimović, Jovan

    2012-01-01

    Through her "calling to service", Florence Nightingale worked as a nurse, manager, researcher, reformer, writer and teacher. The aim of this study is to present Florence Nightingale in all these roles, pointing out all complexity and multidimensionality of nursing profession. Having come from an aristocratic English family, Florence Nightingale was very educated She considered knowledge as a way, and statistical method as an instrument for discovering the rules of the world. Her work during the Crimean War was one of her most important deeds and made her a national hero. After the war, she devoted herself to reforming nursing and public health in Britain and in the world. Since she was bedbound after the Crimean War due to her illness, writing became the most powerful tool she had in achieving her goals. Florence Nightingale wrote many letters to politicians and statesmen, many newspaper and scientific articles. One of her greatest works "Notes on Nursing" was not written only for nurses, but for all women. By founding Nursing school at St. Thomas Hospital in 1860 she aspired to train and educate nurses. Her complete and lifelong devotion to the ,,calling" directed all her activities, contributions and achievements, not only towards nursing but also towards statistics, epidemiology, public health and social sciences.

  8. CROPPER: a metagene creator resource for cross-platform and cross-species compendium studies.

    Science.gov (United States)

    Paananen, Jussi; Storvik, Markus; Wong, Garry

    2006-09-22

    Current genomic research methods provide researchers with enormous amounts of data. Combining data from different high-throughput research technologies commonly available in biological databases can lead to novel findings and increase research efficiency. However, combining data from different heterogeneous sources is often a very arduous task. These sources can be different microarray technology platforms, genomic databases, or experiments performed on various species. Our aim was to develop a software program that could facilitate the combining of data from heterogeneous sources, and thus allow researchers to perform genomic cross-platform/cross-species studies and to use existing experimental data for compendium studies. We have developed a web-based software resource, called CROPPER that uses the latest genomic information concerning different data identifiers and orthologous genes from the Ensembl database. CROPPER can be used to combine genomic data from different heterogeneous sources, allowing researchers to perform cross-platform/cross-species compendium studies without the need for complex computational tools or the requirement of setting up one's own in-house database. We also present an example of a simple cross-platform/cross-species compendium study based on publicly available Parkinson's disease data derived from different sources. CROPPER is a user-friendly and freely available web-based software resource that can be successfully used for cross-species/cross-platform compendium studies.

  9. Copying Right and Copying Wrong with Web 2.0 Tools in the Teacher Education and Communications Classrooms

    Science.gov (United States)

    McGrail, Ewa; McGrail, J. Patrick

    2010-01-01

    Understanding the tenets of copyright in general, and in particular, in online communication and publishing with Web 2.0 tools, has become an important part of literacy in today's Information Age, as well as a cornerstone of free speech and responsible citizenship for the future. Young content creators must be educated about copyright law, their…

  10. The VeTOOLS Project: an example of how to strengthen collaboration between scientists and Civil Protections in disaster risk reduction

    Science.gov (United States)

    Marti, Joan; Bartolini, Stefania; Becerril, Laura

    2016-04-01

    VeTOOLS is a project funded by the European Commission's Humanitarian Aid and Civil Protection department (ECHO), and aims at creating an integrated software platform specially designed to assess and manage volcanic risk. The project facilitates interaction and cooperation between scientists and Civil Protection Agencies in order to share, unify, and exchange procedures, methodologies and technologies to effectively reduce the impacts of volcanic disasters. The project aims at 1) improving and developing volcanic risk assessment and management capacities in active volcanic regions; 2) developing universal methodologies, scenario definitions, response strategies and alert protocols to cope with the full range of volcanic threats; 4) improving quantitative methods and tools for vulnerability and risk assessment; and 5) defining thresholds and protocols for civil protection. With these objectives, the VeTOOLS project points to two of the Sendai Framework resolutions for implementing it: i) Provide guidance on methodologies and standards for risk assessments, disaster risk modelling and the use of data; ii) Promote and support the availability and application of science and technology to decision-making, and offers a good example on how a close collaboration between science and civil protection is an effective way to contribute to DRR. European Commission ECHO Grant SI2.695524

  11. Health professionals as mobile content creators: teaching medical students to develop mHealth applications.

    Science.gov (United States)

    Masters, Ken

    2014-10-01

    Patient access to health information and patient-provider communication is integral to medicine, and can be facilitated by mobile applications ("apps"). Traditionally, student training in mobile Health (mHealth) has focussed on health professionals as consumers of information, with negative impacts on the quality and value of medical apps. This study focuses on teaching medical students to develop their own medical apps. At Sultan Qaboos University, Oman, an app development environment, iBuildApp, was taught to medical students and used to develop their first apps. Students were surveyed on their perceptions of the project. Of the 166 students, 107 (64.5%) completed the survey. There was an increase in the perceived need for such learning, apps were aimed primarily at patients, and previous programming experience was the strongest influencer of a positive experience. A majority (77.6%) wanted more sophisticated development environments in spite of their apparent struggles. The impact of previous experience is similar to other studies; the perceived value and focus on patient apps is indicative of an awareness of patients' use of the devices not reflected in all literature. It is possible to teach medical students the fundamentals of app design so that they may contribute to app development in the future.

  12. Iterative performance assessments as a regulatory tool for evaluating repository safety: How experiences from SKI Project-90 were used in formulating the new performance assessment project SITE-94

    International Nuclear Information System (INIS)

    Andersson, J.

    1993-01-01

    The Swedish Nuclear Power Inspectorate, SKI, regulatory research program has to prepare for the process of licensing a repository for spent nuclear fuel, by building up the necessary knowledge and review capacity. SKIs main strategy for meeting this demand is to develop an independent performance assessment capability. SKIs first own performance assessment project, Project-90, was completed in 1991 and is now followed by a new project, SITE-94. SITE-94 is based on conclusions reached within Project-90. An independent review of Project-90, carried out by a NEA team of experts, has also contributed to the formation of the project. Another important reason for the project is that the implementing organization in Sweden, SKB, has proposed to submit an application to start detailed investigation of a repository candidate site around 1997. SITE-94 is a performance assessment of a hypothetical repository at a real site. The main objective of the project is to determine how site specific data should be assimilated into the performance assessment process, and to evaluate how uncertainties inherent in site characterization will influence performance assessment results. This will be addressed by exploring multiple interpretations, conceptual models, and parameters consistent with the site data. The site evaluation will strive for consistency between geological, hydrological, rock mechanical, and geochemical descriptions. Other important elements of SITE-94 are the development of a practical and defensible methodology for defining, constructing and analyzing scenarios, the development of approaches for treatment of uncertainties, evaluation of canister integrity, and the development and application of an appropriate quality assurance plan for performance assessments

  13. Crowdfunding, an alternative source of financing construction and real estate projects. Guideline for Developers on how to use this tool in medium size projects.

    OpenAIRE

    Sierra Mercado, David

    2017-01-01

    Real estate crowdfunding comprises the process of investing in a real estate projects using online platforms, specialized websites that can reach a large number of potential investors, changing in just few years the traditional approach of the real estate industry. This phenomenon has become a trend among small and medium project developers, which nowadays have this additional source of financing. However, many people still unfamiliar about this new business model. Therefore, it is relevant t...

  14. Spectrum-Malaria: a user-friendly projection tool for health impact assessment and strategic planning by malaria control programmes in sub-Saharan Africa.

    Science.gov (United States)

    Hamilton, Matthew; Mahiane, Guy; Werst, Elric; Sanders, Rachel; Briët, Olivier; Smith, Thomas; Cibulskis, Richard; Cameron, Ewan; Bhatt, Samir; Weiss, Daniel J; Gething, Peter W; Pretorius, Carel; Korenromp, Eline L

    2017-02-10

    Scale-up of malaria prevention and treatment needs to continue but national strategies and budget allocations are not always evidence-based. This article presents a new modelling tool projecting malaria infection, cases and deaths to support impact evaluation, target setting and strategic planning. Nested in the Spectrum suite of programme planning tools, the model includes historic estimates of case incidence and deaths in groups aged up to 4, 5-14, and 15+ years, and prevalence of Plasmodium falciparum infection (PfPR) among children 2-9 years, for 43 sub-Saharan African countries and their 602 provinces, from the WHO and malaria atlas project. Impacts over 2016-2030 are projected for insecticide-treated nets (ITNs), indoor residual spraying (IRS), seasonal malaria chemoprevention (SMC), and effective management of uncomplicated cases (CMU) and severe cases (CMS), using statistical functions fitted to proportional burden reductions simulated in the P. falciparum dynamic transmission model OpenMalaria. In projections for Nigeria, ITNs, IRS, CMU, and CMS scale-up reduced health burdens in all age groups, with largest proportional and especially absolute reductions in children up to 4 years old. Impacts increased from 8 to 10 years following scale-up, reflecting dynamic effects. For scale-up of each intervention to 80% effective coverage, CMU had the largest impacts across all health outcomes, followed by ITNs and IRS; CMS and SMC conferred additional small but rapid mortality impacts. Spectrum-Malaria's user-friendly interface and intuitive display of baseline data and scenario projections holds promise to facilitate capacity building and policy dialogue in malaria programme prioritization. The module's linking to the OneHealth Tool for costing will support use of the software for strategic budget allocation. In settings with moderately low coverage levels, such as Nigeria, improving case management and achieving universal coverage with ITNs could achieve

  15. EERA-DTOC Project: Design Tools for Offshore Wind Farm Clusters; Proyecto EERA-DTOC: herramientas para el diseno de clusters de Parques Eolicos Marinos

    Energy Technology Data Exchange (ETDEWEB)

    Palomares, A. M.

    2015-07-01

    In the EERA-DTOC Project an integrated and validated software design tool for the optimization of offshore wind farms and wind farm clusters has been developed. The CIEMAT contribution to this project has change the view on mesoscale wind forecasting models, which were not so far considered capable of modeling wind farm scale phenomena. It has been shown the ability of the WRF model to simulate the wakes caused by the wind turbines on the downwind ones (inter-turbine wakes within a wind farm) as well as the wakes between wind farms within a cluster. (Author)

  16. [Amusia and aphasia of Bolero's creator--influence of the right hemisphere on music].

    Science.gov (United States)

    Tudor, Lorraine; Sikirić, Predrag; Tudor, Katarina Ivana; Cambi-Sapunar, Liana; Radonić, Vedran; Tudor, Mario; Buca, Ante; Carija, Robert

    2008-07-01

    hemispheres. In 1937, Ravel underwent neurosurgical procedure performed by Vincent; autopsy was not done. It is believed that the cause of hi disease was primary progressive aphasia associated with Pick's disease. Boléro and Concerto for the Left Hand were the last Ravel's works (the onset of his disease), so it is possible that the projected the influence of the healthy right hemisphere onto his music (and on the creative process) because Ravel's left hemispher was damaged. Indeed, in these last music works one can feel the predominance of changes in pitch (timbre), i. e. right hemisphere, in comparison to only few changes of melody (left hemisphere).

  17. From rational creatures to the rational Creator: ancient and patristic analogies of the “fine-tuning” argument

    Directory of Open Access Journals (Sweden)

    Alexey Fokin

    2017-12-01

    Full Text Available In this article the author deals with the proofs of the existence of God, based on the fact of the presence of rational beings in the world. These proofs can be found in Greek and Roman Classical philosophy and early Patristics, and can be viewed as an analogue of the modern “fine-tuning argument”. The author considers the origins and development of this argument in the Greek and Roman philosophy: in Socrates, Plato, Cicero, Sextus Empiricus, and especially the Stoics, who gave to the argument a logical form, based on the relationship between “the parts and the whole”: if the world as a whole produces and contains rational beings as its parts, it should also be rational or contain a rational principle that generates all its parts and governs them, just as human soul governs human body. The correction of this argument was proposed by Sextus Empiricus, who introduced the concept of "spermatic logoi", or rational principles, to explain the generation of the rational beings by the world, so that if the world contains the spermatic logoi of rational and living beings, then the world as a whole is also rational. The author also investigates the reception of the argument based on the existence of rational beings in the world in Latin Patristics: in Minucius Felix, Tertullian and especially Lactantius, in whom this argument has reached the climax of its development. At the same time it was shown, that the ancient argument has undergone a transformation from the postulation of the rationality of the world as a whole or its equation with God himself to a genuine proof of the existence of the one God who is the Creator both of the world and human beings, superior to the both as the all-powerful and transcendent Mind.

  18. No Code Required Giving Users Tools to Transform the Web

    CERN Document Server

    Cypher, Allen; Lau, Tessa; Nichols, Jeffrey

    2010-01-01

    Revolutionary tools are emerging from research labs that enable all computer users to customize and automate their use of the Web without learning how to program. No Code Required takes cutting edge material from academic and industry leaders - the people creating these tools -- and presents the research, development, application, and impact of a variety of new and emerging systems. *The first book since Web 2.0 that covers the latest research, development, and systems emerging from HCI research labs on end user programming tools *Featuring contributions from the creators of Adobe's Zoet

  19. Exploring the persona model as a tool to generate user insight through co-creation with users in the early phase of a design project

    DEFF Research Database (Denmark)

    Hansen, Jane Holm; Haase, Louise Møller

    2017-01-01

    The persona model is a widely know tool for synthesizing user research. A persona is a hypothetical archetype based on actual users, which is typically created to create a shared understanding of the user in the design team. Previous research has focused on the personal model as a consensus......-making tool. However, in this paper the aim is to explore, whether the persona model can also be useful and valuable for collecting user insights. More specifically, the paper investigates the potentials and challenges of using the persona model as a generative tool to achieve user insight, when co......-creating with the user in the early phase of a design project. A modified persona template with fixed parameters has been introduced to users in two co-creation workshops. The users were asked to fill in the persona template based on their own experiences. This study is a first endeavor into exploring the persona model...

  20. Organizational and technological genesis as a tool for strategic planning of large-scale real estate development projects

    Directory of Open Access Journals (Sweden)

    Gusakova Elena

    2018-01-01

    Full Text Available Conceptual planning and implementation of large-scale real estate development projects is one of the most difficult tasks in the organization of construction. In the Russian practice, a large experience of development, complex reorganization and redevelopment of large development areas is accumulated. The methodological basis for solving similar problems is the organizational and technological genesis, which considers the development of the project during the full life cycle. An analysis of this experience allows us to talk about the formation of new and effective approaches and methods within the organizational and technological genesis. Among them, the most significant and universal approaches should be highlighted: The concept of real estate development, which explains the reasons and objective needs for project transformations during its life cycle, as well as to increase the adaptive capabilities of design decisions and the project's suitability for the most likely future changes; Development project of joint action, which is based on the balance of interests of project participants; Master planning of the life cycle stages of the project and subprojects, based on the rethinking of the theory and methods of the construction organization, and allowing rationally localized construction sites and related subprojects, while retaining the remaining development and development area beyond of the negative effect of construction for comfortable living and work.

  1. Evaluation tool for selection and optimisation of hydrogen demonstration projects. Application to a decentralized renewable hydrogen system

    International Nuclear Information System (INIS)

    Bracht, M.; De Groot, A.; Gregoire Padro, C.E.; Schucan, T.H.; Skolnik, E.

    1998-06-01

    As part of the International Energy Agency Hydrogen Implementing Agreement, an evaluation tool to assist in the design, operation and optimisation of hydrogen demonstration facilities is under development. Using commercially available flowsheet simulation software (ASPEN- Plus) as the integrating platform, this tool is designed to provide system developers with a comprehensive data base or library of component models and an integrating platform through which these models may be linked. By combining several energy system components a conceptual design of a integrated hydrogen energy system can be made. As a part of the tool and connected to the library are design guidelines which can help finding the optimal configuration in the design process. The component categories considered include: production, storage, transport, distribution and end use. Many component models have already been included in the initial test platform. The use of the tool will be illustrated by presenting the results of a specific sample system that has been designed and assessed with use of the tool. The system considered is a decentralized renewable hydrogen system in which the hydrogen is produced by biomass gasification or pyrolysis, the produced hydrogen is transported through a pipeline or with a tank truck. The storage options that are considered are liquid hydrogen and compressed gas. The hydrogen is dispensed through a refueling station. Several options for integration are conceivable; i.e. storage of the hydrogen can take place centrally or district heat of a gasification unit can be used to generate electricity for liquefaction, etc. With use of the tool several configurations with different components and various integration options have been examined. Both the results of the modeling effort and an assessment of the evaluation tool will be presented. 5 refs

  2. Results of a Survey Software Development Project Management in the U.S. Aerospace Industry. Volume II. Project Management Techniques, Procedures and Tools.

    Science.gov (United States)

    1979-12-18

    I Z I UO W-1 eu 0 - 0 tD CL 0, 0 -I7 NW 2 - x M.j a CL W2 X 41 a ~ 0 0,a 4~~ 0 Z .D .J 0 2. N 0 ~N IU 0 4 - 2 0 ~. 0 Q. ’o ~ 0, 𔃺e U - U ~- 0, 0 -a...0 .44 A A A Ao 0 - 2. -U 2- 4’ A 4’ A o .~ 0 .~ 2. flJ 2. A Ao ~. a 2. 𔃾 2- @2 @2 @2 A 0 .~. a I- 2. Xii - 0 2 @2 ON AXe Re 2- Oi. K A.. A A AU .40...Project manager or person appointed by him SE/ TD project manager b. Senior ADP Manager Director Director computer programming Software program design

  3. Developing an Evaluation Tool for Assessing Clinical Ethics Consultation Skills in Simulation Based Education: The ACES Project.

    Science.gov (United States)

    Wasson, Katherine; Parsi, Kayhan; McCarthy, Michael; Siddall, Viva Jo; Kuczewski, Mark

    2016-06-01

    The American Society for Bioethics and Humanities has created a quality attestation (QA) process for clinical ethics consultants; the pilot phase of reviewing portfolios has begun. One aspect of the QA process which is particularly challenging is assessing the interpersonal skills of individual clinical ethics consultants. We propose that using case simulation to evaluate clinical ethics consultants is an approach that can meet this need provided clear standards for assessment are identified. To this end, we developed the Assessing Clinical Ethics Skills (ACES) tool, which identifies and specifies specific behaviors that a clinical ethics consultant should demonstrate in an ethics case simulation. The aim is for the clinical ethics consultant or student to use a videotaped case simulation, along with the ACES tool scored by a trained rater, to demonstrate their competence as part of their QA portfolio. The development and piloting of the tool is described.

  4. The Power of Digital Storytelling as a Culturally Relevant Health Promotion Tool.

    Science.gov (United States)

    Briant, Katherine J; Halter, Amy; Marchello, Nathan; Escareño, Monica; Thompson, Beti

    2016-11-01

    Digital storytelling is an emergent method in health promotion. It addresses health inequities by combining technology with the voices of members of vulnerable, often underrepresented populations. The overall goal of this pilot project was to explore if digital storytelling could be a culturally relevant health promotion tool for Hispanics/Latinos to share their experiences with cancer, or other diseases. Promotores participated in a train-the-trainer workshop. Community members worked with trained promotores to create digital stories through community workshops. We conducted one-on-one interviews with digital story creators to elicit perspectives and assess their experience. One overarching theme among storytellers was the power of storytelling. Supporting subthemes that emerged in the interviews were (1) connection and communication, (2) lack of opportunities and barriers to telling stories, and (3) potential for disease prevention awareness and education. This study found digital storytelling to be culturally relevant for Hispanics/Latinos of Mexican origin. For these storytellers it was a uniquely valuable tool for sharing personal stories of overcoming or managing health issues. Participants found the digital story experience to be positive and beneficial. It provided a healing outlet to reflect on a difficult experience and find support within one's own community. © 2016 Society for Public Health Education.

  5. Simulation tools: development and application of nuclear projects; Herramientas de simulacion: desarrollo y aplicacion a proyectos nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Huelamo, E.; Perez Vara, R.; Arguello, A.; Garcia, M.

    2012-11-01

    In this paper we present some simulation models of system and equipment from nuclear power plants, builded-up with EcosimPro, a simulation tool created by Empresarios Agrupados. It was developed as a general simulation engine, as a tool devoted to the resolution of DAE's (ordinary differential and algebraic equations sets), doing abstraction of what physical system they represent. Component libraries must be added to the calculation engine, as needed by the discipline object of simulation, in order to be able of building up models. From first ECOSIM version there were already builded models applied to thermal and nuclear power plants. (Author)

  6. HomesteadCreator

    DEFF Research Database (Denmark)

    Rodil, Kasper; Rehm, Matthias; Winschiers-Theophilus, Heike

    2013-01-01

    Designing intuitive interfaces for rural African users requires us to understand the users' conceptual model. We acknowledge differences in categorization approaches based on cultural factors, among others. In the absence of comprehensive literature and theories, we explore card sorting as a mean...

  7. Through the creator's eyes

    DEFF Research Database (Denmark)

    Glaveanu, Vlad Petre; Lahlou, Saadi

    2012-01-01

    of an adapted Subjective Evidence-Based Ethnography (SEBE). This methodology combines (a) obtaining first person audio-visual recordings of creative action with a miniature video-camera worn at eye-level, (b) accessing the subjective experience of the participant through a confrontation interview based...... of creativity at both process and content levels. The benefits, limitations, and possible applications of the method are considered in the broader context of creativity studies....

  8. Pinkerton's Creator: Steven Kellogg.

    Science.gov (United States)

    Brodie, Carolyn S.

    2002-01-01

    Describes the life of Steven Kellogg, a children's book illustrator and writer. Includes extension ideas for school library media center activities related to his works and presents a selected annotated bibliography in chronological order, videos, and biographical information. (LRW)

  9. Decision support in addiction: The development of an e-health tool to assess and prevent risk of fatal overdose. The ORION Project.

    Science.gov (United States)

    Baldacchino, A; Crocamo, C; Humphris, G; Neufeind, J; Frisher, M; Scherbaum, N; Carrà, G

    2016-09-01

    The application of e-health technology to the field of substance use disorders is at a relatively early stage, and methodological quality is still variable. Few have explored the extent of utilization of communication technology in exploring risk perception by patients enrolled in substance abuse services. The Overdose RIsk InfOrmatioN (ORION) project is a European Commission funded programme, aimed to develop and pilot an e-health psycho-educational tool to provide information to drug using individuals about the risks of suffering a drug overdose. In this article, we report on phase 1 (risk estimation), phase 2 (design), and phase 3 (feasibility) of the ORION project. The development of ORION e-health tool underlined the importance of an evidence-based intervention aimed in obtaining reliable evaluation of risk. The ORION tool supported a decision making process aimed at influencing the substance users' self-efficacy and the degree to which the substance users' understand risk factors. Therefore, its innovative power consisted in translating risks combination into a clear estimation for the user who will then appear more likely to be interested in his/her risk perception. Exploratory field testing and validation confirmed the next stage of evaluation, namely, collection of routine patient samples in study clinics. The associations between risk perception of overdose, engagement with the ORION tool and willingness to alter overdose risk factors, in a clinical setting across various EU member states will further confirm the ORION tool's generalisability and effectiveness. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  10. Remote sensing change detection tools for natural resource managers: Understanding concepts and tradeoffs in the design of landscape monitoring projects

    Science.gov (United States)

    Robert E. Kennedy; Philip A. Townsend; John E. Gross; Warren B. Cohen; Paul Bolstad; Wang Y. Q.; Phyllis Adams

    2009-01-01

    Remote sensing provides a broad view of landscapes and can be consistent through time, making it an important tool for monitoring and managing protected areas. An impediment to broader use of remote sensing science for monitoring has been the need for resource managers to understand the specialized capabilities of an ever-expanding array of image sources and analysis...

  11. Formal methods and tools for the development of distributed and real time systems : Esprit Project 3096 (SPEC)

    NARCIS (Netherlands)

    Roever, de W.P.; Barringer, H.; Courcoubetis, C.; Gabbay, D.M.; Gerth, R.T.; Jonsson, B.; Pnueli, A.; Reed, M.; Sifakis, J.; Vytopil, J.; Wolper, P.

    1990-01-01

    The Basic Research Action No. 3096, Formal Methods snd Tools for the Development of Distributed and Real Time Systems, is funded in the Area of Computer Science, under the ESPRIT Programme of the European Community. The coordinating institution is the Department of Computing Science, Eindhoven

  12. Implementation of an Evidence-Based and Content Validated Standardized Ostomy Algorithm Tool in Home Care: A Quality Improvement Project.

    Science.gov (United States)

    Bare, Kimberly; Drain, Jerri; Timko-Progar, Monica; Stallings, Bobbie; Smith, Kimberly; Ward, Naomi; Wright, Sandra

    Many nurses have limited experience with ostomy management. We sought to provide a standardized approach to ostomy education and management to support nurses in early identification of stomal and peristomal complications, pouching problems, and provide standardized solutions for managing ostomy care in general while improving utilization of formulary products. This article describes development and testing of an ostomy algorithm tool.

  13. Using EPA Tools and Data Services to Inform Changes to Design Storm Definitions for Wastewater Utilities based on Climate Model Projections

    Science.gov (United States)

    Tryby, M.; Fries, J. S.; Baranowski, C.

    2014-12-01

    Extreme precipitation events can cause significant impacts to drinking water and wastewater utilities, including facility damage, water quality impacts, service interruptions and potential risks to human health and the environment due to localized flooding and combined sewer overflows (CSOs). These impacts will become more pronounced with the projected increases in frequency and intensity of extreme precipitation events due to climate change. To model the impacts of extreme precipitation events, wastewater utilities often develop Intensity, Duration, and Frequency (IDF) rainfall curves and "design storms" for use in the U.S. Environmental Protection Agency's (EPA) Storm Water Management Model (SWMM). Wastewater utilities use SWMM for planning, analysis, and facility design related to stormwater runoff, combined and sanitary sewers, and other drainage systems in urban and non-urban areas. SWMM tracks (1) the quantity and quality of runoff made within each sub-catchment; and (2) the flow rate, flow depth, and quality of water in each pipe and channel during a simulation period made up of multiple time steps. In its current format, EPA SWMM does not consider climate change projection data. Climate change may affect the relationship between intensity, duration, and frequency described by past rainfall events. Therefore, EPA is integrating climate projection data available in the Climate Resilience Evaluation and Awareness Tool (CREAT) into SWMM. CREAT is a climate risk assessment tool for utilities that provides downscaled climate change projection data for changes in the amount of rainfall in a 24-hour period for various extreme precipitation events (e.g., from 5-year to 100-year storm events). Incorporating climate change projections into SWMM will provide wastewater utilities with more comprehensive data they can use in planning for future storm events, thereby reducing the impacts to the utility and customers served from flooding and stormwater issues.

  14. Comparing the economic performance and environmental impact of Trans-European Road Networks: the EUNET project and assessment tool

    DEFF Research Database (Denmark)

    Tsamboulas, Dimitrios; Pearman, Alan; Larkinson, John

    1999-01-01

    The EUNET 4th Framework research project takes forwards and develops work begun by the EURET and APAS research programmes, whose common theme was to propose consistent evaluation principles and methods across member states in areas such as new road construction, rail infrastructure and inter...

  15. Focus groups as a tool to collect data in a community informatics project involving elderly rural women

    CSIR Research Space (South Africa)

    Smith, R

    2015-11-01

    Full Text Available The main purpose of the extended project is to identify and investigate the aspects that will encourage elderly women in rural areas to use the ICT platform, and to determine what the physical design, content and applications should look like...

  16. Collaborative Action Research as a Tool for Generating Formative Feedback on Teachers' Classroom Assessment Practice: The KREST Project

    Science.gov (United States)

    Harrison, Christine

    2013-01-01

    This paper sets out to explore science teachers' classroom assessment practices and outlines some of the tensions and synergies in changing assessment practices. It describes episodes from a collaborative action research project with science teachers designed to support the strengthening of classroom assessment practices--the King's Researching…

  17. Developing European conservation and mitigation tools for pollination services: approaches of the STEP (Status and Trends of European Pollinators) project

    NARCIS (Netherlands)

    Potts, S.G.; Biesmeijer, J.C.; Bommarco, R.; Felicioli, A.; Fischer, M.; Jokinen, P.; Kleijn, D.; Klein, A.M.; Kunin, W.E.; Neumann, P.; Penev, L.D.; Petanidou, T.; Rasmont, P.; Roberts, S.P.M.; Smith, H.G.; Sorensen, P.B.; Steffan-Dewenter, I.; Vaissiere, B.E.; Vila, M.; Vujic, A.; Woyciechowski, M.; Zobel, M.; Settele, J.; Schweiger, O.

    2011-01-01

    Pollinating insects form a key component of European biodiversity, and provide a vital ecosystem service to crops and wild plants. There is growing evidence of declines in both wild and domesticated pollinators, and parallel declines in plants relying upon them. The STEP project (Status and Trends

  18. Online Localization of "Zooniverse" Citizen Science Projects--On the Use of Translation Platforms as Tools for Translator Education

    Science.gov (United States)

    Michalak, Krzysztof

    2015-01-01

    This paper aims at describing the way in which online translation platforms can facilitate the process of training translators. "Zooniverse," a website hosting a variety of citizen science projects in which everyone can take part, was used as an example of such a concept. The first section of this paper is focused on the history, idea…

  19. The Web as process tool and product environment for group-based project work in higher education

    NARCIS (Netherlands)

    Collis, Betty; Andernach, Toine; van Diepen, N.M.; Maurer, Hermann

    1996-01-01

    This paper discusses problems confronting the use of group-based project work as an instructional strategy in higher education, and describes two technical courses (i.e., courses in online learning and applications of business information technology) at the University of Twente (Netherlands) in

  20. Parameter calculation tool for the application of radiological dose projection codes; Herramienta de calculo de parametros para la aplicacion de codigos de proyeccion de dosis radiologicas

    Energy Technology Data Exchange (ETDEWEB)

    Galindo G, I. F.; Vergara del C, J. A.; Galvan A, S. J. [Instituto Nacional de Electricidad y Energias Limpias, Reforma 113, Col. Palmira, 62490 Cuernavaca, Morelos (Mexico); Tijerina S, F., E-mail: francisco.tijerina@cfe.gob.mx [CFE, Central Nucleoelectrica Laguna Verde, Carretera Federal Cardel-Nautla Km 42.5, 91476 Municipio Alto Lucero, Veracruz (Mexico)

    2016-09-15

    The use of specialized codes to estimate the radiation dose projection to an emergency postulated event at a nuclear power plant requires that certain plant data be available according to the event being simulated. The calculation of the possible radiological release is the critical activity to carry out the emergency actions. However, not all of the plant data required are obtained directly from the plant but need to be calculated. In this paper we present a computational tool that calculates the plant data required to use the radiological dose estimation codes. The tool provides the required information when there is a gas emergency venting event in the primary containment atmosphere, whether well or dry well and also calculates the time in which the spent fuel pool would be discovered in the event of a leak of water on some of the walls or floor of the pool. The tool developed has mathematical models for the processes involved such as: compressible flow in pipes considering area change and for constant area, taking into account the effects of friction and for the case of the spent fuel pool hydraulic models to calculate the time in which a container is emptied. The models implemented in the tool are validated with data from the literature for simulated cases. The results with the tool are very similar to those of reference. This tool will also be very supportive so that in postulated emergency cases can use the radiological dose estimation codes to adequately and efficiently determine the actions to be taken in a way that affects as little as possible. (Author)

  1. Project WAGR: the UK demonstration project for power reactor decommissioning - a review of the tools used to dismantle the reactor core

    International Nuclear Information System (INIS)

    Benest, T.G.

    2008-01-01

    route through which to move, sort, assay condition and package the waste. The RDM and associated hoist have been used to deploy the numerous tools and end effectors necessary to effect the painstaking dismantling process. Now that the remote operations are reaching a conclusion it is possible to review the success of both these tools and the RDM itself. This paper summarises the results of the review, draws conclusions and by taking particular examples illustrates the lessons learned. (author)

  2. The Use of Tools, Modelling Methods, Data Types, and Endpoints in Systems Medicine: A Survey on Projects of the German e:Med-Programme.

    Science.gov (United States)

    Gietzelt, Matthias; Höfer, Thomas; Knaup-Gregori, Petra; König, Rainer; Löpprich, Martin; Poos, Alexandra; Ganzinger, Matthias

    2016-01-01

    Systems medicine is the consequent continuation of research efforts on the road to an individualized medicine. Thereby, systems medicine tries to offer a holistic view on the patient by combining different data sources to highlight different perspectives on the patient's health. Our research question was to identify the main data types, modelling methods, analysis tools, and endpoints currently used and studied in systems medicine. Therefore, we conducted a survey on projects with a systems medicine background. Fifty participants completed this survey. The results of the survey were analyzed using histograms and cross tables, and finally compared to results of a former literature review with the same research focus. The data types reported in this survey were widely diversified. As expected, genomic and phenotype data were used most frequently. In contrast, environmental and behavioral data were rarely used in the projects. Overall, the cross tables of the data types in the survey and the literature review showed overlapping results.

  3. CoC GIS Tools (GIS Tool)

    Data.gov (United States)

    Department of Housing and Urban Development — This tool provides a no-cost downloadable software tool that allows users to interact with professional quality GIS maps. Users access pre-compiled projects through...

  4. MOCAT project: support tool to the management of the emergencies in the nuclear power plant of Santa Maria of Garona

    International Nuclear Information System (INIS)

    Calleja, J. L.

    2010-01-01

    Santa Maria de Garona NPP, as part of its continuous improvement philosophy, has decided to undertake the modernization of its Technical Support Center (CAT with the aim of improving the emergency management, provided in the Internal Emergency Plan. To this end, Tecnatom, applying the know-how acquired and within its line of technological innovation, has designed the Technical Support Center modernization project, MOCAT, in collaboration with Garona NPP. This project is basically the application of new information and communications technologies to the management of the information available on the CAT, and the computerization of the procedures for the responsible from the different areas of the CAT, which it is going to contribute significantly to the improvement of the security, allowing a better understanding of the state of the plant in emergency as well as a faster and smoother decision making, and an improved training and education of those responsible for the CAT in emergency management. (Author) 8 refs.

  5. Create, compose, connect! reading, writing, and learning with digital tools

    CERN Document Server

    Hyler, Jeremy

    2014-01-01

    Find out how to incorporate digital tools into your English language arts class to improve students' reading, writing, listening, and speaking skills. Authors Jeremy Hyler and Troy Hicks show you that technology is not just about making a lesson engaging; it's about helping students become effective creators and consumers of information in today's fast-paced world. You'll learn how to use mobile technologies to teach narrative, informational, and argument writing as well as visual literacy and multimodal research. Each chapter is filled with exciting lesson plans and tech tool suggestions that you can take back to your own classroom immediately.

  6. Developing European conservation and mitigation tools for pollination services: approaches of the STEP (Status and Trends of European Pollinators) project

    OpenAIRE

    Potts, Simon G.; Biesmeijer, Jacobus C.; Bommarco, Riccardo; Felicioli, Antonio; Fischer, Markus; Jokinen, Pekka; Kleijn, David; Klein, Alexandra-Maria; Kunin, William E.; Neumann, Peter; Penev, Lyubomir D.; Petanidou, Theodora; Rasmont, Pierre; Roberts, Stuart P. M.; Smith, Henrik G.

    2011-01-01

    [ES] Los insectos polinizadores forman un componente clave de la biodiversidad europea, y proporcionan servicios vitales a los ecosistemas de plantas cultivadas y silvestres. Existe una creciente evidencia del declive de polinizadores silvestres y domesticados, y del declive paralelo de las plantas que dependen de ellos. El proyecto STEP (Estado y tendencias de los polinizadores europeos, 2010-2015, www.step-project.net) está documentando elementos críticos en la naturaleza y la extensión de ...

  7. Validation of projective mapping as potential sensory screening tool for application by the honeybush herbal tea industry.

    Science.gov (United States)

    Moelich, Erika Ilette; Muller, Magdalena; Joubert, Elizabeth; Næs, Tormod; Kidd, Martin

    2017-09-01

    Honeybush herbal tea is produced from the endemic South African Cyclopia species. Plant material subjected to a high-temperature oxidation step ("fermentation") forms the bulk of production. Production lags behind demand forcing tea merchants to use blends of available material to supply local and international markets. The distinct differences in the sensory profiles of the herbal tea produced from the different Cyclopia species require that special care is given to blending to ensure a consistent, high quality product. Although conventional descriptive sensory analysis (DSA) is highly effective in providing a detailed sensory profile of herbal tea infusions, industry requires a method that is more time- and cost-effective. Recent advances in sensory science have led to the development of rapid profiling methodologies. The question is whether projective mapping can successfully be used for the sensory characterisation of herbal tea infusions. Trained assessors performed global and partial projective mapping to determine the validity of this technique for the sensory characterisation of infusions of five Cyclopia species. Similar product configurations were obtained when comparing results of DSA and global and partial projective mapping. Comparison of replicate sessions showed RV coefficients >0.8. A similarity index, based on multifactor analysis, was calculated to determine assessor repeatability. Global projective mapping, demonstrated to be a valid method for providing a broad sensory characterisation of Cyclopia species, is thus suitable as a rapid quality control method of honeybush infusions. Its application by the honeybush industry could improve the consistency of the sensory profile of blended products. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Management tools for R&D engineering projects: Coordination perspective for large international consortium (NeXOS)

    Science.gov (United States)

    Castro, Ayoze; Memè, Simone; Quevedo, Eduardo; Waldmann, Christoph; Pearlman, Jay; Delory, Eric; Llinás, Octavio

    2017-04-01

    NeXOS is a cross-functional and multidisciplinary project funded under the EU FP7 Program, which involves 21 organizations from six different European countries. They all have different backgrounds, interests, business models and perspectives. To be successful, NeXOS applied an international recognized management methodology tailored to the specific project's environment and conditions, with an explicit structure based on defined roles and responsibilities for the people involved in the project and a means for effective communication between them (Fig.1). The project, divided in four different stages of requirements, design, integration, validation and demonstration, allows a clearer monitor of its progress, a comparison of the level of achievement in accordance with the plan and an earlier detection of problems/issues, leading to implementation of less disruptive, but still effective corrective actions. NeXOS is following an ambitious plan to develop innovative sensor systems with a high degree of modularity and interoperability, starting with requirements definition through validation and demonstration phase. To make this integrative approach possible, a management development strategy has been used incorporating systems engineering methods (Fig.2). Although this is standard practice in software development and large scale systems such as aircraft production, it is still new in the ocean hardware business and therefore NeXOS was a test case for this development concept. The question is one of scale as ocean observation systems are typically built on the scale of a few with co-located teams. With a system of diverse technologies (optical, acoustic, platform interfaces), there are cultural differences that must be bridged. The greatest challenge is in the implementation and the willingness of different teams to work with an engineering process, which may help ultimate system integration, but may place additional burdens on individual participants. This presentation

  9. White Paper on the Use of Team Calendars with the JIRA Issue Tracking System and Confluence Collaboration Tools for the xLPR Project

    Energy Technology Data Exchange (ETDEWEB)

    Klasky, Hilda B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Williams, Paul T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bass, Bennett Richard [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2012-09-01

    ORNL was tasked by xLPR project management to propose a team calendar for use within the xLPR consortium. Among various options that were considered, the approach judged by ORNL to best fit the needs of the xLPR project is presented in this document. The Atlassian Team Calendars plug-in used with the Confluence collaboration tool was recommended for several reasons, including the advantage that it provides for a tight integration between Confluence (found at https://xlpr.ornl.gov/wiki ) and xLPR s JIRA issue tracking system (found at https://xlpr.ornl.gov/jira ). This document is divided into two parts. The first part (Sections 1-6) consists of the white paper, which highlights some of the ways that Team Calendars can improve com mun ication between xLPR project managers, group leads, and team members when JIRA is applied for both issue tracking and change-management activities. Specific points emphasized herein are as follows: The Team Calendar application greatly enhances the added value that the JIRA and Confluence tools bring to the xLPR Project. The Team Calendar can improve com mun ication between xLPR project managers, group leads, and team members when JIRA is applied for both issue tracking and change-management activities. The Team Calendar works across different email tools such as Outlook 2011, Outlook 2010, Outlook 2007, Google Calendars and Mac s iCalendar to name a few. xLPR users can now access the wiki Confluence (with embedded Team Calendars) directly from JIRA without having to re-validate their login. The second part consists of an Annex (Section 7), which describes how users can subscribe to Team Calendars from different calendar applications. Specific instructions are given in the Annex that describe how to Import xLPR Team Calendar to Outlook Version Office 2010 Import xLPR Team Calendar to Outlook Version Office 2007 Subscribe to Team Calendar from Google Calendar The reader is directed to Section 4 for instructions on adding events to the

  10. The Halden Reactor Project workshop on improved system development using case-tools based on formal methods

    International Nuclear Information System (INIS)

    Gran, Bjoern Axel; Sivertsen, Terje; Stoelen, Ketil; Thunem, Harald; Zhang, Wenhui

    1999-02-01

    The workshop 'Improved system development using case-tools based on formal methods' was organised in Halden, December 1-2, 1998. The purpose of the workshop was to present and discuss the state-of-the-art with respect to formal approaches. The workshop had two invited presentations: 'Formality in specification and modelling: developments in software engineering practice' by John Fitzgerald (Centre for Software Reliability, UK), and 'Formal methods in industry - reaching results when correctness is not the only issue' by Oeystein Haugen (Ericsson NorARC, Norway). The workshop also had several presentations divided into three sessions on industrial experience, tools, and combined approaches. Each day there was a discussion. The first was on the effect of formalization, while the second was on the role of formal verification. At the end of the workshop, the presentations and discussions were summarised into specific recommendations. This report summarises the presentations of the speakers, the discussions, the recommendations, and the demonstrations given at the workshop (author) (ml)

  11. Radiology resident MR and CT image analysis skill assessment using an interactive volumetric simulation tool - the RadioLOG project

    International Nuclear Information System (INIS)

    Gondim Teixeira, Pedro Augusto; Leplat, Christophe; Cendre, Romain; Hossu, Gabriela; Felblinger, Jacques; Blum, Alain; Braun, Marc

    2017-01-01

    Assess the use of a volumetric simulation tool for the evaluation of radiology resident MR and CT interpretation skills. Forty-three participants were evaluated with a software allowing the visualisation of multiple volumetric image series. There were 7 medical students, 28 residents and 8 senior radiologists among the participants. Residents were divided into two sub-groups (novice and advanced). The test was composed of 15 exercises on general radiology and lasted 45 min. Participants answered a questionnaire on their experience with the test using a 5-point Likert scale. This study was approved by the dean of the medical school and did not require ethics committee approval. The reliability of the test was good with a Cronbach alpha value of 0.9. Test scores were significantly different in all sub-groups studies (p < 0.0225). The relation between test scores and the year of residency was logarithmic (R"2 = 0.974). Participants agreed that the test reflected their radiological practice (3.9 ± 0.9 on a 5-point scale) and was better than the conventional evaluation methods (4.6 ± 0.5 on a 5-point scale). This software provides a high quality evaluation tool for the assessment of the interpretation skills in radiology residents. (orig.)

  12. Radiology resident MR and CT image analysis skill assessment using an interactive volumetric simulation tool - the RadioLOG project

    Energy Technology Data Exchange (ETDEWEB)

    Gondim Teixeira, Pedro Augusto; Leplat, Christophe [CHRU-Nancy Hopital Central, Service d' Imagerie Guilloz, Nancy (France); Universite de Lorraine, IADI U947, Nancy (France); Cendre, Romain [INSERM, CIC-IT 1433, Nancy (France); Hossu, Gabriela; Felblinger, Jacques [Universite de Lorraine, IADI U947, Nancy (France); INSERM, CIC-IT 1433, Nancy (France); Blum, Alain [CHRU-Nancy Hopital Central, Service d' Imagerie Guilloz, Nancy (France); Braun, Marc [CHRU-Nancy Hopital Central, Service de Neuroradiologie, Nancy (France)

    2017-02-15

    Assess the use of a volumetric simulation tool for the evaluation of radiology resident MR and CT interpretation skills. Forty-three participants were evaluated with a software allowing the visualisation of multiple volumetric image series. There were 7 medical students, 28 residents and 8 senior radiologists among the participants. Residents were divided into two sub-groups (novice and advanced). The test was composed of 15 exercises on general radiology and lasted 45 min. Participants answered a questionnaire on their experience with the test using a 5-point Likert scale. This study was approved by the dean of the medical school and did not require ethics committee approval. The reliability of the test was good with a Cronbach alpha value of 0.9. Test scores were significantly different in all sub-groups studies (p < 0.0225). The relation between test scores and the year of residency was logarithmic (R{sup 2} = 0.974). Participants agreed that the test reflected their radiological practice (3.9 ± 0.9 on a 5-point scale) and was better than the conventional evaluation methods (4.6 ± 0.5 on a 5-point scale). This software provides a high quality evaluation tool for the assessment of the interpretation skills in radiology residents. (orig.)

  13. Operational guidance for radiation emergency response organisations in Europe for using biodosimetric tools developed in EU MULTIBIODOSE project.

    Science.gov (United States)

    Jaworska, Alicja; Ainsbury, Elizabeth A; Fattibene, Paola; Lindholm, Carita; Oestreicher, Ursula; Rothkamm, Kai; Romm, Horst; Thierens, Hubert; Trompier, Francois; Voisin, Philippe; Vral, Anne; Woda, Clemens; Wojcik, Andrzej

    2015-04-01

    In the event of a large-scale radiological emergency, the triage of individuals according to their degree of exposure forms an important initial step of the accident management. Although clinical signs and symptoms of a serious exposure may be used for radiological triage, they are not necessarily radiation specific and can lead to a false diagnosis. Biodosimetry is a method based on the analysis of radiation-induced changes in cells of the human body or in portable electronic devices and enables the unequivocal identification of exposed people who should receive medical treatment. The MULTIBIODOSE (MBD) consortium developed and validated several biodosimetric assays and adapted and tested them as tools for biological dose assessment in a mass-casualty event. Different biodosimetric assays were validated against the 'gold standard' of biological dosimetry-the dicentric assay. The assays were harmonised in such a way that, in an emergency situation, they can be run in parallel in a network of European laboratories. The aim of this guidance is to give a concise overview of the developed biodosimetric tools as well as how and when they can be used in an emergency situation. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  14. Operational guidance for radiation emergency response organisations in Europe for using bio-dosimetric tools developed in EU MULTIBIODOSE project

    International Nuclear Information System (INIS)

    Jaworska, Alicja; Ainsbury, Elizabeth A.; Rothkamm, Kai; Fattibene, Paola; Lindholm, Carita; Oestreicher, Ursula; Romm, Horst; Thierens, Hubert; Vral, Anne; Trompier, Francois; Voisin, Philippe; Woda, Clemens; Wojcik, Andrzej

    2015-01-01

    In the event of a large-scale radiological emergency, the triage of individuals according to their degree of exposure forms an important initial step of the accident management. Although clinical signs and symptoms of a serious exposure may be used for radiological triage, they are not necessarily radiation specific and can lead to a false diagnosis. Biodosimetry is a method based on the analysis of radiation-induced changes in cells of the human body or in portable electronic devices and enables the unequivocal identification of exposed people who should receive medical treatment. The MULTIBIODOSE (MBD) consortium developed and validated several bio-dosimetric assays and adapted and tested them as tools for biological dose assessment in a mass-casualty event. Different bio-dosimetric assays were validated against the 'gold standard' of biological dosimetry-the dicentric assay. The assays were harmonised in such a way that, in an emergency situation, they can be run in parallel in a network of European laboratories. The aim of this guidance is to give a concise overview of the developed bio-dosimetric tools as well as how and when they can be used in an emergency situation. (authors)

  15. Useful design tools?

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole

    2005-01-01

    vague and contested concept of sustainability into concrete concepts and building projects. It describes a typology of tools: process tools, impact assessment tools, multi-criteria tools and tools for monitoring. It includes a Danish paradigmatic case study of stakeholder participation in the planning...... of a new sustainable settlement. The use of design tools is discussed in relation to innovation and stakeholder participation, and it is stressed that the usefulness of design tools is context dependent....

  16. Projective mapping with food stickers: A good tool for better understanding perception of fish in children of different ages

    OpenAIRE

    Daltoe, Marina Mitterer; Breda, Leandra Schuastz; Belusso, A.C.; Nogueira, Barbara Arruda; Rodrigues, Deyse Pegorini; Fiszman, Susana; Varela, Paula

    2017-01-01

    The objective of this study was to better understand the perception of fish products among school children of three different age groups, 5–6 years, 7–8 years and 9–0 years. In order to do so, we used Projective Mapping (PM) with food stickers and a word association task (WA). A total of 149 children from three public schools in the state of Parana, Brazil, have participated on this study. The age groups were interviewed (on 1–1 basis) by six monitors qualified to apply the sensory methods us...

  17. PUBLIC-PRIVATE PARTNERSHIP – THE MOST IMPORTANT MODERN TOOLS OF SUCCESSFUL IMPLEMENTATION OF NATIONAL INVESTMENT PROJECTS

    Directory of Open Access Journals (Sweden)

    E. E. Zhukov

    2010-01-01

    Full Text Available Article is devoted to actual problems and prospects of perfection of public private partnership mechanisms at important social and economic investment projects realization. The analysis of foreign practice in the PPP field is carried out. Features of Russian PPP development model are considered. The main difficulties on this way are designated. Such as: absence of the normal competitive environment during the choice of the private partner-investor; absence of the qualified experts in the PPP; imperfect legislative base; corruption of officials, etc. Main offers of perfection of PPP-mechanism in Russia, accounting forthcoming modernization and innovative development of Russian economy are given.

  18. The 'PUCE CAFE' Project: the first 15K coffee microarray, a new tool for discovering candidate genes correlated to agronomic and quality traits.

    Science.gov (United States)

    Privat, Isabelle; Bardil, Amélie; Gomez, Aureliano Bombarely; Severac, Dany; Dantec, Christelle; Fuentes, Ivanna; Mueller, Lukas; Joët, Thierry; Pot, David; Foucrier, Séverine; Dussert, Stéphane; Leroy, Thierry; Journot, Laurent; de Kochko, Alexandre; Campa, Claudine; Combes, Marie-Christine; Lashermes, Philippe; Bertrand, Benoit

    2011-01-05

    Understanding the genetic elements that contribute to key aspects of coffee biology will have an impact on future agronomical improvements for this economically important tree. During the past years, EST collections were generated in Coffee, opening the possibility to create new tools for functional genomics. The "PUCE CAFE" Project, organized by the scientific consortium NESTLE/IRD/CIRAD, has developed an oligo-based microarray using 15,721 unigenes derived from published coffee EST sequences mostly obtained from different stages of fruit development and leaves in Coffea Canephora (Robusta). Hybridizations for two independent experiments served to compare global gene expression profiles in three types of tissue matter (mature beans, leaves and flowers) in C. canephora as well as in the leaves of three different coffee species (C. canephora, C. eugenoides and C. arabica). Microarray construction, statistical analyses and validation by Q-PCR analysis are presented in this study. We have generated the first 15 K coffee array during this PUCE CAFE project, granted by Génoplante (the French consortium for plant genomics). This new tool will help study functional genomics in a wide range of experiments on various plant tissues, such as analyzing bean maturation or resistance to pathogens or drought. Furthermore, the use of this array has proven to be valid in different coffee species (diploid or tetraploid), drastically enlarging its impact for high-throughput gene expression in the community of coffee research.

  19. The 'PUCE CAFE' Project: the First 15K Coffee Microarray, a New Tool for Discovering Candidate Genes correlated to Agronomic and Quality Traits

    Directory of Open Access Journals (Sweden)

    Leroy Thierry

    2011-01-01

    Full Text Available Abstract Background Understanding the genetic elements that contribute to key aspects of coffee biology will have an impact on future agronomical improvements for this economically important tree. During the past years, EST collections were generated in Coffee, opening the possibility to create new tools for functional genomics. Results The "PUCE CAFE" Project, organized by the scientific consortium NESTLE/IRD/CIRAD, has developed an oligo-based microarray using 15,721 unigenes derived from published coffee EST sequences mostly obtained from different stages of fruit development and leaves in Coffea Canephora (Robusta. Hybridizations for two independent experiments served to compare global gene expression profiles in three types of tissue matter (mature beans, leaves and flowers in C. canephora as well as in the leaves of three different coffee species (C. canephora, C. eugenoides and C. arabica. Microarray construction, statistical analyses and validation by Q-PCR analysis are presented in this study. Conclusion We have generated the first 15 K coffee array during this PUCE CAFE project, granted by Génoplante (the French consortium for plant genomics. This new tool will help study functional genomics in a wide range of experiments on various plant tissues, such as analyzing bean maturation or resistance to pathogens or drought. Furthermore, the use of this array has proven to be valid in different coffee species (diploid or tetraploid, drastically enlarging its impact for high-throughput gene expression in the community of coffee research.

  20. THE PROJECTED RATE OF COMPETENCE FORMATION AS A TOOL OF EDUCATIONAL MANAGEMENT OF ADVANCED LEVEL OF EDUCATION

    Directory of Open Access Journals (Sweden)

    L. V. Lvov

    2017-01-01

    Full Text Available Introduction. Specially organized complex of the scientific research directed to obtaining the reliable advancing information about development of pedagogical members is necessary for the development of educational policy, the strategy of development for educational systems, and methods of management of quality of pedagogical activity at different stages of education. The result of the educational management of professional and educational process is caused by the quality of pedagogical design. In turn, the quality of pedagogical forecasting is a factor determining the overall effectiveness of management through the pedagogical design.The aim of this article is to describe the model that allows applying the rate of competence formation as a tool of educational management and providing the advanced level of education. Methodology and research methods are based on pre-competence and context approach, which supposes the content selection as a set of competencies and designing the educational and professional process with the use of the rate of formation of ability and readiness (competency as a tool of teaching management.Results. The author states socio-pedagogical contradiction, which is in acute shortage of predictive tools in the management of the educational process. The article describes terminology and empirical mathematical models that underpin pedagogical management of the educational and professional training of students that provides the advanced level of formation of organizational and managerial competence.Scientific novelty. The author clarifies the concept of the advanced level of education; introduces the term of the rate of formation of competency; proposes a new model to solve the problem of predicting learning outcomes and timely management influence by managers of education at all stages of the design and functioning of the educational system in the conditions of implementation of competence-based approach in the higher school

  1. Summer Student Work Project Report: SCADA Bridge Tool Development Automatically Capturing Data from SCADA to the Maintenance System

    CERN Document Server

    Alhambra-Moron, Alfonso

    2015-01-01

    The main purpose of this report is to summarize the work project I have been doing at CERN during the last 3 months as a Summer Student. My name is Alfonso Alhambra Morón and the 8th of June 2015 I joined the EN-HE-LM team as a summer student supervised by Damien Lafarge in order to collaborate in the automation of the transfer of meter readings from SCADA1 to Infor EAM2, the computerized maintenance management system at CERN. The main objective of my project was to enable the automatic updates of meters in Infor EAM fetching data from SCADA so as to automatize a process which was done manually before and consumed resources in terms of having to consult the meter physically, import this information to Infor EAM by hand and detecting and correcting the errors that can occur when doing all of this manually. This problem is shared by several other teams at CERN apart from the Lift Maintenance team and for this reason the main target I had when developing my solution was flexibility and scalability so as to make...

  2. A planning tool for tree species selection and planting schedule in forestation projects considering environmental and socio-economic benefits.

    Science.gov (United States)

    Rollan, Catherine Denise; Li, Richard; San Juan, Jayne Lois; Dizon, Liezel; Ong, Karl Benedict

    2018-01-15

    Species selection is a crucial step in the planning phase of forestation programs given its impact on the results and on stakeholder interactions. This study develops a planning tool for forestation programs that incorporates the selection of tree species and the scheduling of planting and harvesting, while balancing the maximization of the carbon sequestered and income realized, into the forestation decision-making and planning process. The validation of the goal programming model formulated demonstrates that the characteristics of natural tree species along with the behavior of growth and timing of yield are significant factors in achieving the environmental and socio-economic aspirations. The proposed model is therefore useful in gauging species behavior and performance over time. Sensitivity analysis was also conducted where the behavior of the income generated and carbon sequestered with respect to the external factors such as carbon market prices, percentage area allocated for protection and discount factor was assessed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. A dynamic systems engineering methodology research study. Phase 2: Evaluating methodologies, tools, and techniques for applicability to NASA's systems projects

    Science.gov (United States)

    Paul, Arthur S.; Gill, Tepper L.; Maclin, Arlene P.

    1989-01-01

    A study of NASA's Systems Management Policy (SMP) concluded that the primary methodology being used by the Mission Operations and Data Systems Directorate and its subordinate, the Networks Division, is very effective. Still some unmet needs were identified. This study involved evaluating methodologies, tools, and techniques with the potential for resolving the previously identified deficiencies. Six preselected methodologies being used by other organizations with similar development problems were studied. The study revealed a wide range of significant differences in structure. Each system had some strengths but none will satisfy all of the needs of the Networks Division. Areas for improvement of the methodology being used by the Networks Division are listed with recommendations for specific action.

  4. CATEGORIES AND TOOLS FOR MANAGING THE INTEGRATED PROJECTS AND PROGRAMS OF INNOVATIVE DEVELOPMENT OF GEOTRIONS IN RUSSIA

    Directory of Open Access Journals (Sweden)

    Chudin Anatoly Andreyevich

    2013-05-01

    Full Text Available "An integrated approach to managing the development of the innovative three-component systems, including "population” (social sphere, economy (industrial sphere, and territory (regional sphere, has been developed." These spheres of innovative development have the earth coordinates, are linked non-continuously but inseparably, so they can be analyzed only comprehensively. Following N.D. Matrusov [1] we will call them geotrions. The most important problems in geotrion management are considered in many researches, including [2, 3, 4]. The developed approach serves to overcome many obstacles to the effective development of the innovation process in Russia. The work identifies its basic categories, tools and technologies. The developed approach has revealed the minimum full table of the most significant parameters in the management of the innovation process in the geotrion (parameters of the order and integral parameters of the interaction between the processes, which provided a simple model and the effectiveness of management, through the use of its own power.

  5. The Biomolecule Sequencer Project: Nanopore Sequencing as a Dual-Use Tool for Crew Health and Astrobiology Investigations

    Science.gov (United States)

    John, K. K.; Botkin, D. S.; Burton, A. S.; Castro-Wallace, S. L.; Chaput, J. D.; Dworkin, J. P.; Lehman, N.; Lupisella, M. L.; Mason, C. E.; Smith, D. J.; hide

    2016-01-01

    Human missions to Mars will fundamentally transform how the planet is explored, enabling new scientific discoveries through more sophisticated sample acquisition and processing than can currently be implemented in robotic exploration. The presence of humans also poses new challenges, including ensuring astronaut safety and health and monitoring contamination. Because the capability to transfer materials to Earth will be extremely limited, there is a strong need for in situ diagnostic capabilities. Nucleotide sequencing is a particularly powerful tool because it can be used to: (1) mitigate microbial risks to crew by allowing identification of microbes in water, in air, and on surfaces; (2) identify optimal treatment strategies for infections that arise in crew members; and (3) track how crew members, microbes, and mission-relevant organisms (e.g., farmed plants) respond to conditions on Mars through transcriptomic and genomic changes. Sequencing would also offer benefits for science investigations occurring on the surface of Mars by permitting identification of Earth-derived contamination in samples. If Mars contains indigenous life, and that life is based on nucleic acids or other closely related molecules, sequencing would serve as a critical tool for the characterization of those molecules. Therefore, spaceflight-compatible nucleic acid sequencing would be an important capability for both crew health and astrobiology exploration. Advances in sequencing technology on Earth have been driven largely by needs for higher throughput and read accuracy. Although some reduction in size has been achieved, nearly all commercially available sequencers are not compatible with spaceflight due to size, power, and operational requirements. Exceptions are nanopore-based sequencers that measure changes in current caused by DNA passing through pores; these devices are inherently much smaller and require significantly less power than sequencers using other detection methods

  6. Uses Of Innovative Project Management Tools In The Establishment Of E-Centers Solar PV System Installation Project Without Electricity In Bangladesh A Case Study On Ingen Technology Limited.

    Directory of Open Access Journals (Sweden)

    Md. Mohiuddin

    2017-02-01

    Full Text Available Todays world is shaped by availability of Information and Communication Technology ICT. Government of Bangladesh declared a vision of Digital Bangladesh by 2021 to ensure services at peoples doorsteps. A total number of 4501 UISCs Union Information and Service Centers have been established at all Union Parishads of Bangladesh. UISCs are the e-Service delivery outlets which initiated a new era in information and service delivery for rural and marginalized people. With the aim to ensure services at citizens doorsteps UISCs are offering various government services like public examination results online university admission birth-death registration agricultural amp law consultancy telemedicine life insurance private services like mobile banking English learning computer training email internet browsing and so on. Now-a-days UISC is a local knowledge Centre. But there is no electricity in each Union Parishad of Bangladesh. in that case for establishment of e-Centre in Seven Divisions of Bangladesh at Unions without Electricity project needed to provide electricity in everywhere. Without Electricity we cant imagine it. Thats why Bangladesh Government decided to install the Solar PV system in different unions of Bangladesh division wise. This research aims to focus on the implementation of project management concepts in Establishment of e-Centre in Seven Divisions of Bangladesh at Unions without Electricity under Bangladesh Computer Council BCC. Around 1000 unions e-Centre has been brought under solar power which is total 1800 KW for Rural infrastructure development under digital Bangladesh program. The purpose of the study is to identify and explore the processes of the InGen Technology Limited to show how the company accomplishes a Successful Project by formulating it through project management tools. The study investigates measures and evaluates the total processes or activities of InGen Technology Limited in accomplishing and delivering successful

  7. Fiscal 1997 research report. International energy use rationalization project (Analytical tool research project for energy consumption efficiency improvement in Asia); 1997 nendo kokusai energy shiyo gorika taisaku jigyo chosa hokokusho. Asia energy shohi koritsuka bunseki tool chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    The project aims to prepare inter-industry relations tables and models for energy analysis for Asian countries and thereby to probe into relations between the industrial structure or the ultimate consumption structure and energy consumption. For the comprehension of energy consumption as broken by each industry, Asian nations' inter-industry relations tables and energy statistics are linked for the compilation of energy analysis oriented inter-industry relations tables, and the resultant tables are used for the metric analysis of industrial structures and energy consumption structures in these countries. The tables prepared this time are 1985 tables for Korea, Indonesia, Thailand, and the Philippines and 1990 tables for China, Singapore, and Malaysia. The Malaysian transportation sector needs to be improved in energy saving. In Singapore, energy saving is functioning effectively in the transportation sector. China's energy consuming industries are those involving coal, chemistry, steelmaking, ceramics, and earth and quarrying. In Taiwan, improvement needs to be made in the transportation sector. Korea should conserve energy in the transportation sector. In the Philippines, energy needs to be saved in businesses related to water supply, transportation, and fishery. Thai industries as a whole needs to save energy. Improved energy consumption efficiency is sought for in the Indonesian cement related sector. (NEDO)

  8. Fiscal 1997 research report. International energy use rationalization project (Analytical tool research project for energy consumption efficiency improvement in Asia); 1997 nendo kokusai energy shiyo gorika taisaku jigyo chosa hokokusho. Asia energy shohi koritsuka bunseki tool chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    The project aims to prepare inter-industry relations tables and models for energy analysis for Asian countries and thereby to probe into relations between the industrial structure or the ultimate consumption structure and energy consumption. For the comprehension of energy consumption as broken by each industry, Asian nations' inter-industry relations tables and energy statistics are linked for the compilation of energy analysis oriented inter-industry relations tables, and the resultant tables are used for the metric analysis of industrial structures and energy consumption structures in these countries. The tables prepared this time are 1985 tables for Korea, Indonesia, Thailand, and the Philippines and 1990 tables for China, Singapore, and Malaysia. The Malaysian transportation sector needs to be improved in energy saving. In Singapore, energy saving is functioning effectively in the transportation sector. China's energy consuming industries are those involving coal, chemistry, steelmaking, ceramics, and earth and quarrying. In Taiwan, improvement needs to be made in the transportation sector. Korea should conserve energy in the transportation sector. In the Philippines, energy needs to be saved in businesses related to water supply, transportation, and fishery. Thai industries as a whole needs to save energy. Improved energy consumption efficiency is sought for in the Indonesian cement related sector. (NEDO)

  9. Computer Assessed Design – A Vehicle of Architectural Communication and a Design Tool

    OpenAIRE

    Petrovici, Liliana-Mihaela

    2012-01-01

    In comparison with the limits of the traditional representation tools, the development of the computer graphics constitutes an opportunity to assert architectural values. The differences between communication codes of the architects and public are diminished; the architectural ideas can be represented in a coherent, intelligible and attractive way, so that they get more chances to be materialized according to the thinking of the creator. Concurrently, the graphic software have been improving ...

  10. Radiological protection of populations in contaminated areas: synthesis of tools, concepts and methods elaborated in the ETHOS project

    International Nuclear Information System (INIS)

    Lepicard, S.; Lochard, J.; Schneider, T.

    2004-01-01

    The ETHOS project has been implemented in Belarus from 1996 to 2001. This report addresses several issues concerning the monitoring of radioactivity of the environment and of persons, and its modalities: organization of measurement devices, restitution of measurements, formatting and exploitation of results by different actors in order to develop strategies adapted to a contaminated environment. Thus, the report discusses the methodological fundamentals, the common information base on a radiological situation, and modalities for information exchange, formatting and processing. Then, it addresses the articulation between individual and public actions in improvement strategies (monitoring of local product quality with example of milk, children health monitoring), and the issue of the management of radioactive wastes in household activities

  11. Status of the SPES project, a new tool for fundamental and apply science studies with exotic ion beams at LNL

    Energy Technology Data Exchange (ETDEWEB)

    Napoli, D. R., E-mail: napoli@lnl.infn.it; Andrighetto, A.; Antonini, P.; Benini, D.; Bermudez, J.; Bisoffi, G.; Boratto, E.; Bortolato, D.; Calderolla, M.; Calore, A.; Campo, D.; Carturan, S.; Cinausero, M.; Comunian, M.; Corradetti, S.; De Angelis, G.; De Ruvo, P. L.; Esposito, J.; Ferrari, L.; Galatá, A. [INFN - Laboratori Nazionali di Legnaro, Viale dell’Università 2, I-35020 Legnaro (PD) (Italy); and others

    2016-07-07

    SPES, a new accelerator facility for both the production of exotic ion beams and radio-pharmaceuticals, is presently being installed at the Laboratori Nazionali di Legnaro in Italy (LNL). The new cyclotron, which will provide high intensity proton beams for the production of the rare isotopes, has been installed and is now in the commissioning phase. We present here the status of the part of the project devoted to the production and acceleration of fission fragments created in the interaction of an intense proton beam on a production target of UCx. The expected SPES radioactive beams intensities, their quality and their maximum energies (up to 11 MeV/A for A=130) will permit to perform forefront research in nuclear structure and nuclear dynamics far from the stability valley. Another low energy section of the facility is foreseen for new and challenging research, both in the nuclear physics and in the material science frameworks.

  12. PeptideNavigator: An interactive tool for exploring large and complex data sets generated during peptide-based drug design projects.

    Science.gov (United States)

    Diller, Kyle I; Bayden, Alexander S; Audie, Joseph; Diller, David J

    2018-01-01

    There is growing interest in peptide-based drug design and discovery. Due to their relatively large size, polymeric nature, and chemical complexity, the design of peptide-based drugs presents an interesting "big data" challenge. Here, we describe an interactive computational environment, PeptideNavigator, for naturally exploring the tremendous amount of information generated during a peptide drug design project. The purpose of PeptideNavigator is the presentation of large and complex experimental and computational data sets, particularly 3D data, so as to enable multidisciplinary scientists to make optimal decisions during a peptide drug discovery project. PeptideNavigator provides users with numerous viewing options, such as scatter plots, sequence views, and sequence frequency diagrams. These views allow for the collective visualization and exploration of many peptides and their properties, ultimately enabling the user to focus on a small number of peptides of interest. To drill down into the details of individual peptides, PeptideNavigator provides users with a Ramachandran plot viewer and a fully featured 3D visualization tool. Each view is linked, allowing the user to seamlessly navigate from collective views of large peptide data sets to the details of individual peptides with promising property profiles. Two case studies, based on MHC-1A activating peptides and MDM2 scaffold design, are presented to demonstrate the utility of PeptideNavigator in the context of disparate peptide-design projects. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Managing research and surveillance projects in real-time with a novel open-source eManagement tool designed for under-resourced countries.

    Science.gov (United States)

    Steiner, Andreas; Hella, Jerry; Grüninger, Servan; Mhalu, Grace; Mhimbira, Francis; Cercamondi, Colin I; Doulla, Basra; Maire, Nicolas; Fenner, Lukas

    2016-09-01

    A software tool is developed to facilitate data entry and to monitor research projects in under-resourced countries in real-time. The eManagement tool "odk_planner" is written in the scripting languages PHP and Python. The odk_planner is lightweight and uses minimal internet resources. It was designed to be used with the open source software Open Data Kit (ODK). The users can easily configure odk_planner to meet their needs, and the online interface displays data collected from ODK forms in a graphically informative way. The odk_planner also allows users to upload pictures and laboratory results and sends text messages automatically. User-defined access rights protect data and privacy. We present examples from four field applications in Tanzania successfully using the eManagement tool: 1) clinical trial; 2) longitudinal Tuberculosis (TB) Cohort Study with a complex visit schedule, where it was used to graphically display missing case report forms, upload digitalized X-rays, and send text message reminders to patients; 3) intervention study to improve TB case detection, carried out at pharmacies: a tablet-based electronic referral system monitored referred patients, and sent automated messages to remind pharmacy clients to visit a TB Clinic; and 4) TB retreatment case monitoring designed to improve drug resistance surveillance: clinicians at four public TB clinics and lab technicians at the TB reference laboratory used a smartphone-based application that tracked sputum samples, and collected clinical and laboratory data. The user friendly, open source odk_planner is a simple, but multi-functional, Web-based eManagement tool with add-ons that helps researchers conduct studies in under-resourced countries. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  14. How to Gain Value from a Project Management Model: Case Study

    DEFF Research Database (Denmark)

    Riis, Eva; Eskerod, Pernille

    2010-01-01

      Recent research has shown that PM models can be a powerful creator of value for companies. This paper extends this research aiming at gaining a deeper understanding of the preconditions that must exist for harvesting the values of a common frame of reference for project management. It reports...... findings from in-depth investigations in a Danish industrial concern that considers its PM model as the core of its project activities.  ...

  15. Design and Construction of Precision Tooling for Construction of Micromegas Detectors for the ATLAS Small Wheel Upgrade Project in Germany

    CERN Document Server

    Losel, Philipp Jonathan; The ATLAS collaboration; Schaile, Otto; Hertenberger, Ralf; Biebel, Otmar; Bortfeldt, Jonathan; Flierl, Bernhard Matthias

    2016-01-01

    Mechanical precision is a key-aspect of the high-rate capable Micromegas detectors for the upgrade of the Small Wheels of the ATLAS muon spectrometer. 32 SM2 quadruplets will be built by four German institutes with cathodes and strip-anodes made of stable honeycomb sandwiches. To achieve a single plane resolution below $100\\mu m$ the deviation from planarity of a single detector plane must not exceed $80\\mu m$ over the whole active area and the global position of the readout strips has to be within $30\\mu m$ for a single readout-plane of 3 PCB's, as well as between all four planes of a quadruplet. Precision tooling is used for the correct positioning of readout PCB's and readout sandwich planes. For quality control of the planarity of the sandwich planes a laser distance sensor combined with a coordinate measurement system has been developed. Deviation from planarity below 10 $\\mu$m can be easily resolved. We will present key features of the challenging construction procedure to achieve this high level of pre...

  16. The STRATEGY project: decision tools to aid sustainable restoration and long-term management of contaminated agricultural ecosystems.

    Science.gov (United States)

    Howard, B J; Beresford, N A; Nisbet, A; Cox, G; Oughton, D H; Hunt, J; Alvarez, B; Andersson, K G; Liland, A; Voigt, G

    2005-01-01

    The STRATEGY project (Sustainable Restoration and Long-Term Management of Contaminated Rural, Urban and Industrial Ecosystems) aimed to provide a holistic decision framework for the selection of optimal restoration strategies for the long-term sustainable management of contaminated areas in Western Europe. A critical evaluation was carried out of countermeasures and waste disposal options, from which compendia of state-of-the-art restoration methods were compiled. A decision support system capable of optimising spatially varying restoration strategies, that considered the level of averted dose, costs (including those of waste disposal) and environmental side effects was developed. Appropriate methods of estimating indirect costs associated with side effects and of communicating with stakeholders were identified. The importance of stakeholder consultation at a local level and of ensuring that any response is site and scenario specific were emphasised. A value matrix approach was suggested as a method of addressing social and ethical issues within the decision-making process, and was designed to be compatible with both the countermeasure compendia and the decision support system. The applicability and usefulness of STRATEGY outputs for food production systems in the medium to long term is assessed.

  17. The STRATEGY project: decision tools to aid sustainable restoration and long-term management of contaminated agricultural ecosystems

    International Nuclear Information System (INIS)

    Howard, B.J.; Beresford, N.A.; Nisbet, A.; Cox, G.; Oughton, D.H.; Hunt, J.; Alvarez, B.; Andersson, K.G.; Liland, A.; Voigt, G.

    2005-01-01

    The STRATEGY project (Sustainable Restoration and Long-Term Management of Contaminated Rural, Urban and Industrial Ecosystems) aimed to provide a holistic decision framework for the selection of optimal restoration strategies for the long-term sustainable management of contaminated areas in Western Europe. A critical evaluation was carried out of countermeasures and waste disposal options, from which compendia of state-of-the-art restoration methods were compiled. A decision support system capable of optimising spatially varying restoration strategies, that considered the level of averted dose, costs (including those of waste disposal) and environmental side effects was developed. Appropriate methods of estimating indirect costs associated with side effects and of communicating with stakeholders were identified. The importance of stakeholder consultation at a local level and of ensuring that any response is site and scenario specific were emphasised. A value matrix approach was suggested as a method of addressing social and ethical issues within the decision-making process, and was designed to be compatible with both the countermeasure compendia and the decision support system. The applicability and usefulness of STRATEGY outputs for food production systems in the medium to long term is assessed

  18. The Pocketable Electronic Devices in Radiation Oncology (PEDRO) Project: How the Use of Tools in Medical Decision Making is Changing?

    Science.gov (United States)

    De Bari, Berardino; Franco, Pierfrancesco; Niyazi, Maximilian; Cornetto, Andrea Peruzzo; Qvortrup, Camilla; Martin, Arturo Navarro; Cacicedo, Jon; Fernandez, Gonçalo; Louro, Luís Vasco; Lestrade, Laëtitia; Ciammella, Patrizia; Greto, Daniela; Checkrine, Tarik; Youssef, Elkholti; Filippi, Andrea Riccardo; Poulsen, Laurids Østergaard; Alongi, Filippo

    2016-04-01

    To analyze the impact of mobile electronic devices (MEDs) and apps in the daily clinical activity of young radiation or clinical oncologists in 5 Western European countries (Italy, Germany, Spain, Portugal, and Denmark). A web-based questionnaire was sent to 462 young (≤40 years) members of the national radiation or clinical oncology associations of the countries involved in the study. The 15 items investigated diffusion of MEDs (smartphones and/or tablets), their impact on daily clinical activity, and the differences perceived by participants along time. A total of 386 (83.5%) of the 462 correctly filled questionnaires were statistically evaluated. Up to 65% of respondents declared to use an electronic device during their clinical activity. Conversely, 72% considered low to moderate impact of smartphones/tables on their daily practice. The daily use significantly increased from 2009 to 2012: users reporting a use ≥6 times/d raised from 5% to 39.9%. Professional needs fulfillment was declared by less than 68% of respondents and compliance to apps indications by 66%. Significant differences were seen among the countries, in particular concerning the feeling of usefulness of MEDs in the daily clinical life. The perception of the need of a comprehensive Web site containing a variety of applications (apps) for clinical use significantly differed among countries in 2009, while it was comparable in 2012. This survey showed a large diffusion of MEDs in young professionals working in radiation oncology. Looking at these data, it is important to verify the consistency of information found within apps, in order to avoid potential errors eventually detrimental for patients. "Quality assurance" criteria should be specifically developed for medical apps and a comprehensive Web site gathering all reliable applications and tools might be useful for daily clinical practice. © The Author(s) 2015.

  19. 3D virtual character reconstruction from projections: a NURBS-based approach

    Science.gov (United States)

    Triki, Olfa; Zaharia, Titus B.; Preteux, Francoise J.

    2004-05-01

    This work has been carried out within the framework of the industrial project, so-called TOON, supported by the French government. TOON aims at developing tools for automating the traditional 2D cartoon content production. This paper presents preliminary results of the TOON platform. The proposed methodology concerns the issues of 2D/3D reconstruction from a limited number of drawn projections, and 2D/3D manipulation/deformation/refinement of virtual characters. Specifically, we show that the NURBS-based modeling approach developed here offers a well-suited framework for generating deformable 3D virtual characters from incomplete 2D information. Furthermore, crucial functionalities such as animation and non-rigid deformation can be also efficiently handled and solved. Note that user interaction is enabled exclusively in 2D by achieving a multiview constraint specification method. This is fully consistent and compliant with the cartoon creator traditional practice and makes it possible to avoid the use of 3D modeling software packages which are generally complex to manipulate.

  20. The survey as a tool for analysis of the development project. The case study of Pieve a Socana.

    Directory of Open Access Journals (Sweden)

    Carlo Battini

    2015-07-01

    Full Text Available The technological solutions, made available today, offer opportunities for great interest for the detection in the cultural heritage sector, both as regards the time of primary importance, the phase of acquisition of the given metric, both as regards the representation for objects of archaeological interest, artistic, architectural.A architectural artifact is a set of three-dimensional components that define spatially a form and a project idea; the representation of the architecture may not use simply means two-dimensional graphs to describe it and describe it in all its parts, but need, and today it is possible, of systems that provide for the possibility to analyze from multiple points of view the forms that compose it.Multimedia communication can play a very important role to obtain indications on the actions of recovery and enhancement of cultural and environmental heritage. A aid can be provided by informatics and systems of simulation of virtual reality with which, in addition to the delivery of information, you can view models capable of telling the development that the well has had in the history.As case study analyzed for the definition of methodological research presented here was taken into consideration the Pieve di Sant'Antonino in Socana. This ancient church is located in the municipality of Castel Focognano in the Casentino area, located in the vicinity of a crossroads of important routes of the ancient road and medieval, in particular, in a point of convergence between the Rassina stream and the river Arno; preserves within its own structures the signs and testimonies of the various civilizations are in the valley, and therefore an interesting example of permanence of the sacredness of the place through the centuries.The research examines the data collected from the campaignof integrated survey (performed using laser scanning systems, data acquired topographically and manual measurements that are analyzed to find the the module

  1. The CAMU Rule: A tool for implementing a protective, cost-effective remedy at the Fernald Environmental Management Project

    International Nuclear Information System (INIS)

    Dupuis-Nouille, E.M.; Goidell, L.C.; Strimbu, M.J.

    1995-01-01

    The Fernald Environmental Management Project (FEMP) is a former uranium processing facility currently under remediation pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act as amended (CERCLA). Contamination at the FEMP consists of low-level radioactivity, hazardous substances, hazardous wastes and/or mixed wastes. Regulations promulgated under the Resource Conservation and Recovery Act as amended (RCRA) are evaluated as applicable or relevant and appropriate requirements (ARARs) for remediation of the FEMP. Historically, joint CERCLA-RCRA guidance dictated that hazardous waste could not be treated, or moved out of the designated area of contiguous contamination (AOC), without triggering land disposal restrictions (LDRs) or minimum technology requirements (MTRs). To avoid invoking these stringent requirements, in situ capping was chosen as the lower cost remedy at many sites, although on-site disposal and/or treatment of hazardous wastes would have been more protective. The Corrective Action Management Units (CAMUs) and Temporary Units (TUs) Final Rule [58 FR 8658, Vol. 58, No. 29, hereinafter the open-quotes CAMU Ruleclose quotes], promulgated on February 16, 1993, provides facilities regulated under RCRA corrective action authority with greater flexibility to move, treat, and dispose of wastes on site without triggering LDRs or MTRs, thereby encouraging application of innovative technologies and more protective remedies. The waste acceptance criteria for the on-site disposal facility is based on site-specific considerations including the mobility of the contaminants through the underlying site geology and the protectiveness of the engineered liners. Application of the open-quotes CAMU Ruleclose quotes allows for disposition in the on-site facility based on these technical considerations rather than on regulatory classifications

  2. Ionosphere Waves Service (IWS – a problem-oriented tool in ionosphere and Space Weather research produced by POPDAT project

    Directory of Open Access Journals (Sweden)

    Ferencz Csaba

    2014-05-01

    Full Text Available In the frame of the FP7 POPDAT project the Ionosphere Waves Service (IWS has been developed and opened for public access by ionosphere experts. IWS is forming a database, derived from archived ionospheric wave records to assist the ionosphere and Space Weather research, and to answer the following questions: How can the data of earlier ionospheric missions be reprocessed with current algorithms to gain more profitable results? How could the scientific community be provided with a new insight on wave processes that take place in the ionosphere? The answer is a specific and unique data mining service accessing a collection of topical catalogs that characterize a huge number of recorded occurrences of Whistler-like Electromagnetic Wave Phenomena, Atmosphere Gravity Waves, and Traveling Ionosphere Disturbances. IWS online service (http://popdat.cbk.waw.pl offers end users to query optional set of predefined wave phenomena, their detailed characteristics. These were collected by target specific event detection algorithms in selected satellite records during database buildup phase. Result of performed wave processing thus represents useful information on statistical or comparative investigations of wave types, listed in a detailed catalog of ionospheric wave phenomena. The IWS provides wave event characteristics, extracted by specific software systems from data records of the selected satellite missions. The end-user can access targets by making specific searches and use statistical modules within the service in their field of interest. Therefore the IWS opens a new way in ionosphere and Space Weather research. The scientific applications covered by IWS concern beyond Space Weather also other fields like earthquake precursors, ionosphere climatology, geomagnetic storms, troposphere-ionosphere energy transfer, and trans-ionosphere link perturbations.

  3. Ionosphere Waves Service (IWS) - a problem-oriented tool in ionosphere and Space Weather research produced by POPDAT project

    Science.gov (United States)

    Ferencz, Csaba; Lizunov, Georgii; Crespon, François; Price, Ivan; Bankov, Ludmil; Przepiórka, Dorota; Brieß, Klaus; Dudkin, Denis; Girenko, Andrey; Korepanov, Valery; Kuzmych, Andrii; Skorokhod, Tetiana; Marinov, Pencho; Piankova, Olena; Rothkaehl, Hanna; Shtus, Tetyana; Steinbach, Péter; Lichtenberger, János; Sterenharz, Arnold; Vassileva, Any

    2014-05-01

    In the frame of the FP7 POPDAT project the Ionosphere Waves Service (IWS) has been developed and opened for public access by ionosphere experts. IWS is forming a database, derived from archived ionospheric wave records to assist the ionosphere and Space Weather research, and to answer the following questions: How can the data of earlier ionospheric missions be reprocessed with current algorithms to gain more profitable results? How could the scientific community be provided with a new insight on wave processes that take place in the ionosphere? The answer is a specific and unique data mining service accessing a collection of topical catalogs that characterize a huge number of recorded occurrences of Whistler-like Electromagnetic Wave Phenomena, Atmosphere Gravity Waves, and Traveling Ionosphere Disturbances. IWS online service (http://popdat.cbk.waw.pl) offers end users to query optional set of predefined wave phenomena, their detailed characteristics. These were collected by target specific event detection algorithms in selected satellite records during database buildup phase. Result of performed wave processing thus represents useful information on statistical or comparative investigations of wave types, listed in a detailed catalog of ionospheric wave phenomena. The IWS provides wave event characteristics, extracted by specific software systems from data records of the selected satellite missions. The end-user can access targets by making specific searches and use statistical modules within the service in their field of interest. Therefore the IWS opens a new way in ionosphere and Space Weather research. The scientific applications covered by IWS concern beyond Space Weather also other fields like earthquake precursors, ionosphere climatology, geomagnetic storms, troposphere-ionosphere energy transfer, and trans-ionosphere link perturbations.

  4. Wind power projects in the CDM: Methodologies and tools for baselines, carbon financing and substainability analysis[CDM=Clean Development Mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Ringius, L.; Grohnheit, P.E.; Nielsen, L.H.; Olivier, A.L.; Painuly, J.; Villavicencio, A.

    2002-12-01

    The report is intended to be a guidance document for project developers, investors, lenders, and CDM host countries involved in wind power projects in the CDM. The report explores in particular those issues that are important in CDM project assessment and development - that is, baseline development, carbon financing, and environmental sustainability. It does not deal in detail with those issues that are routinely covered in a standard wind power project assessment. The report tests, compares, and recommends methodologies for and approaches to baseline development. To present the application and implications of the various methodologies and approaches in a concrete context, Africa's largest wind farm-namely the 60 MW wind farm located in Zafarana, Egypt- is examined as a hypothetical CDM wind power project The report shows that for the present case example there is a difference of about 25% between the lowest (0.5496 tCO2/MWh) and the highest emission rate (0.6868 tCO{sub 2}/MWh) estimated in accordance with these three standardized approaches to baseline development according to the Marrakesh Accord. This difference in emission factors comes about partly as a result of including hydroelectric power in the baseline scenario. Hydroelectric resources constitute around 21% of the generation capacity in Egypt, and, if excluding hydropower, the difference between the lowest and the highest baseline is reduced to 18%. Furthermore, since the two variations of the 'historical' baseline option examined result in the highest and the lowest baselines, by disregarding this baseline option altogether the difference between the lowest and the highest is reduced to 16%. The ES3-model, which the Systems Analysis Department at Risoe National Laboratory has developed, makes it possible for this report to explore the project-specific approach to baseline development in some detail. Based on quite disaggregated data on the Egyptian electricity system, including the wind

  5. Pilot project: Physiologic responses to a high-intensity active video game with COPD patients-Tools for home rehabilitation.

    Science.gov (United States)

    Parent, Andrée-Anne; Gosselin-Boucher, Vincent; Houle-Peloquin, Marilyn; Poirier, Claude; Comtois, Alain-Steve

    2018-05-01

    Chronic obstructive pulmonary disease (COPD) is a respiratory condition that causes a significant deterioration of the quality of life. However, exercise can improve the quality of life for COPD patients and it is for this reason previous study observed the effects of active video games to increase exercise. Using motion capture devices with short bursts of exercise never been tried with COPD patients. The objective was to observe the feasibility of using this device safely and easily with COPD patients. A total of 14 participants (8 men, 69 ± 6 years, 6 women, 74 ± 6 years), with a moderate to severe COPD diagnosis performed exercise games (Shape-Up, Ubisoft, Mtl) adapted under supervision. Gaming sessions of 10-15 min duration were composed of four games of about 1.5 min separated by rest. Average and peak minute ventilation, and METs peak were, respectively: Stunt Run game (lifting knees on spot) 25.3 ± 6.8, 33.5 ± 8.2 L/min and 4.2 ± 1.5 METs; Arctic Punch game (punching targets): 23.1 ± 5.6, 31.8 ± 9.8 L/min and 3.7 ± 1.2 METs; To the Core game (core twist), 22.2 ± 7.3, 29.2 ± 9.9 L/min and 3.3 ± 1.1 METs; and Squat me to the Moon game (sitting to standing), 27.8 ± 6.7, 36.8 ± 11.1 L/min and 4.4 ± 1.1 METs. Knowing the pleasure reported by the participants, the safety, and the ability to use it with assistance, it seems that the games could be a good tool in order for COPD patients to exercise at home. However, further investigation needs to be completed in order to observe the benefits in comparison to a traditional training program. © 2018 John Wiley & Sons Ltd.

  6. Neutron imaging: A non-destructive tool for materials testing. Report of a coordinated research project 2003-2006

    International Nuclear Information System (INIS)

    2008-09-01

    The enhancement of utilization of research reactors is one of the major objectives of the IAEA's project on Effective Utilization of Research Reactors. In particular, the improvement of existing installations for neutron imaging and the effective utilization of such facilities are intended. From the experience of Type A facilities, it is obvious that some investment is required to come from simple neutron imaging methods (film, track-etch foils) to the more enhanced ones. Related to the installation and operation of the whole reactor system, the volume of the investment for an imaging device is minor. Also compared to the installations for neutron scattering research, neutron imaging systems are relatively cheap, but very efficient in the use of the neutrons. Therefore, one of the aims of the CRP was to look for adapted solutions for the individual reactor installation and beam line. Specific Research Objectives: To optimize the neutron beams for imaging purpose using modern simulation techniques; To enhance the beam intensity using modern layout principles, neutron optics, like focusing and beam guides and filters; To develop a standardized, low cost, neutron image grabber and analyzer for efficient data collection that can be used with low intensity sources; To improve signal processing techniques used in neutron imaging applications. Expected Research Outputs: Neutron radiography is used at research reactor centres in many Member States, but the facilities are not optimized for attractive potential applications. This fact has been brought out at various discussion meetings. The CRP is aimed at improving the design of beam lines in terms of neutron collimation and intensity; Improvements in resolution are normally achieved at a cost in intensity. For an instrument exhibiting good resolution, one needs to employ a fast counting system. It is proposed to work along these lines to develop an optimised detection system. Many facilities, at present, have small CCD

  7. Projected 21st century coastal flooding in the Southern California Bight. Part 2: Tools for assessing climate change-driven coastal hazards and socio-economic impacts

    Science.gov (United States)

    Erikson, Li; Barnard, Patrick; O'Neill, Andrea; Wood, Nathan J.; Jones, Jeanne M.; Finzi Hart, Juliette; Vitousek, Sean; Limber, Patrick; Hayden, Maya; Fitzgibbon, Michael; Lovering, Jessica; Foxgrover, Amy C.

    2018-01-01

    This paper is the second of two that describes the Coastal Storm Modeling System (CoSMoS) approach for quantifying physical hazards and socio-economic hazard exposure in coastal zones affected by sea-level rise and changing coastal storms. The modelling approach, presented in Part 1, downscales atmospheric global-scale projections to local scale coastal flood impacts by deterministically computing the combined hazards of sea-level rise, waves, storm surges, astronomic tides, fluvial discharges, and changes in shoreline positions. The method is demonstrated through an application to Southern California, United States, where the shoreline is a mix of bluffs, beaches, highly managed coastal communities, and infrastructure of high economic value. Results show that inclusion of 100-year projected coastal storms will increase flooding by 9–350% (an additional average 53.0 ± 16.0 km2) in addition to a 25–500 cm sea-level rise. The greater flooding extents translate to a 55–110% increase in residential impact and a 40–90% increase in building replacement costs. To communicate hazards and ranges in socio-economic exposures to these hazards, a set of tools were collaboratively designed and tested with stakeholders and policy makers; these tools consist of two web-based mapping and analytic applications as well as virtual reality visualizations. To reach a larger audience and enhance usability of the data, outreach and engagement included workshop-style trainings for targeted end-users and innovative applications of the virtual reality visualizations.

  8. Conception of personal career as a self-realization project

    OpenAIRE

    Tarasova, Julija

    2017-01-01

    SUMMARY Conception of personal career as a self-realization project. Bachelor work. Relevance: Nowadays career is an important aspect in an individual’s life where the main author of the script, the director and creator is the person who takes responsibility for his/her own life. Modern career management is a life long process, which is more like a self monitored project based on self realisation. A successful career in project management is not only about an individual’s personal qualities, ...

  9. [A creator of modern surgery--Johann von Mikulicz-Radecki and contemporary ophthalmologists at the University of Wroclaw at the turn of the 19th-20th century].

    Science.gov (United States)

    Nizankowska, Maria Hanna; Kalinowska, Joanna; Pacan, Anna

    2005-01-01

    The authors present the history of the life and achievements of Jan Mikulicz-Radecki as the creator of modern surgery and his own school of surgery, especially during his work at the Wroclaw University in 1890-1905 years. The contemporary ophthalmologists as Richard Foerster, Hermann Ludwig Cohn, Wilhelm Uhthoff and theirs famous coworkers are also presented.

  10. A spatially encoded dose difference maximal intensity projection map for patient dose evaluation: A new first line patient quality assurance tool

    Energy Technology Data Exchange (ETDEWEB)

    Hu Weigang; Graff, Pierre; Boettger, Thomas; Pouliot, Jean [Department of Radiation Oncology, University of California, San Francisco, San Francisco, California 94143 (United States); and others

    2011-04-15

    Purpose: To develop a spatially encoded dose difference maximal intensity projection (DD-MIP) as an online patient dose evaluation tool for visualizing the dose differences between the planning dose and dose on the treatment day. Methods: Megavoltage cone-beam CT (MVCBCT) images acquired on the treatment day are used for generating the dose difference index. Each index is represented by different colors for underdose, acceptable, and overdose regions. A maximal intensity projection (MIP) algorithm is developed to compress all the information of an arbitrary 3D dose difference index into a 2D DD-MIP image. In such an algorithm, a distance transformation is generated based on the planning CT. Then, two new volumes representing the overdose and underdose regions of the dose difference index are encoded with the distance transformation map. The distance-encoded indices of each volume are normalized using the skin distance obtained on the planning CT. After that, two MIPs are generated based on the underdose and overdose volumes with green-to-blue and green-to-red lookup tables, respectively. Finally, the two MIPs are merged with an appropriate transparency level and rendered in planning CT images. Results: The spatially encoded DD-MIP was implemented in a dose-guided radiotherapy prototype and tested on 33 MVCBCT images from six patients. The user can easily establish the threshold for the overdose and underdose. A 3% difference between the treatment and planning dose was used as the threshold in the study; hence, the DD-MIP shows red or blue color for the dose difference >3% or {<=}3%, respectively. With such a method, the overdose and underdose regions can be visualized and distinguished without being overshadowed by superficial dose differences. Conclusions: A DD-MIP algorithm was developed that compresses information from 3D into a single or two orthogonal projections while hinting the user whether the dose difference is on the skin surface or deeper.

  11. A spatially encoded dose difference maximal intensity projection map for patient dose evaluation: a new first line patient quality assurance tool.

    Science.gov (United States)

    Hu, Weigang; Graff, Pierre; Boettger, Thomas; Pouliot, Jean

    2011-04-01

    To develop a spatially encoded dose difference maximal intensity projection (DD-MIP) as an online patient dose evaluation tool for visualizing the dose differences between the planning dose and dose on the treatment day. Megavoltage cone-beam CT (MVCBCT) images acquired on the treatment day are used for generating the dose difference index. Each index is represented by different colors for underdose, acceptable, and overdose regions. A maximal intensity projection (MIP) algorithm is developed to compress all the information of an arbitrary 3D dose difference index into a 2D DD-MIP image. In such an algorithm, a distance transformation is generated based on the planning CT. Then, two new volumes representing the overdose and underdose regions of the dose difference index are encoded with the distance transformation map. The distance-encoded indices of each volume are normalized using the skin distance obtained on the planning CT. After that, two MIPs are generated based on the underdose and overdose volumes with green-to-blue and green-to-red lookup tables, respectively. Finally, the two MIPs are merged with an appropriate transparency level and rendered in planning CT images. The spatially encoded DD-MIP was implemented in a dose-guided radiotherapy prototype and tested on 33 MVCBCT images from six patients. The user can easily establish the threshold for the overdose and underdose. A 3% difference between the treatment and planning dose was used as the threshold in the study; hence, the DD-MIP shows red or blue color for the dose difference > 3% or < or = 3%, respectively. With such a method, the overdose and underdose regions can be visualized and distinguished without being overshadowed by superficial dose differences. A DD-MIP algorithm was developed that compresses information from 3D into a single or two orthogonal projections while hinting the user whether the dose difference is on the skin surface or deeper.

  12. Assessing and Developing the Application of LEED Green Building Rating System as a Sustainable Project Management and Market Tool in the Italian Context

    Directory of Open Access Journals (Sweden)

    Walaa S. E. Ismaee

    2016-07-01

    Full Text Available The paper discusses the recent introduction of the LEED system to the Italian context in order to assess its role to promote sustainable building process in the Italian context, pointing out its potentials on one hand as well as their gaps and limitations on the other hand, and suggests means for its future development. The study discusses the application of LEED as a ‘Sustainable Project management tool’ to guide sustainable building performance. This requires investigating the following: its structure, tools, assessment criteria along with its benchmarks and references. It also discusses the application of LEED as a ‘Sustainable building Certification and market tool’. This investigates the role and value of the LEED certification in the Italian Green market. The research method is comprised of three parts. The first part is a comparative analysis of LEED categories against Italian national initiatives for sustainability. The comparison showed that most LEED categories are already mandated by national norms and directives but they may differ in their stringency creating some areas of precedence of LEED system or drawbacks. This streamlines the adaptation process of LEED system to the Italian context. The second part investigates LEED projects’ market analysis. The result showed that the shift towards a sustainable building process is occurring slowly and on a vertical scale focusing on some building sectors rather than others. Its market diffusion in the Italian context faces challenges regarding the insufficient availability of green materials and products satisfying its requirements, as well as high soft cost of sustainability tests and expertise required. The Third part presents a practical review-citing the methodology and results of a survey conducted by the researchers in mid-2012. It is composed of a web-based questionnaire and interviews among a sample of LEED professionals in Italy. The result shows that LEED systems needs

  13. Management Tools

    Science.gov (United States)

    1987-01-01

    Manugistics, Inc. (formerly AVYX, Inc.) has introduced a new programming language for IBM and IBM compatible computers called TREES-pls. It is a resource management tool originating from the space shuttle, that can be used in such applications as scheduling, resource allocation project control, information management, and artificial intelligence. Manugistics, Inc. was looking for a flexible tool that can be applied to many problems with minimal adaptation. Among the non-government markets are aerospace, other manufacturing, transportation, health care, food and beverage and professional services.

  14. واقع بعض مؤسسات ومراكز المبدعين في فلسطين وتطلعاتهم (دراسة ميدانية The Reality Of Some Institutions AndCenters Of Creators And Their Aspirations in Palestine (Field Study

    Directory of Open Access Journals (Sweden)

    Omar Rimawi عمر الريماوي

    2016-03-01

    Full Text Available The study aimed to reveal the reality of institutions, centers of creators and their aspirations in the Palestine, A field study on a sample of centers and institutions concerned. Using case study and interviews. The study results showed that the most used scales to find out the creator, was the IQ tests , and activities carried out by the centers and institutions creators in schools .It also showed That the needs of the creators was the appreciation , and the needs of their supervisors was the continuous training . The difficulties faced by supervisors was moving between regions , while the conflict between the institution and the school was the most important difficulties which faced by the creators themselves, in addition to the lack of cooperation of schools head teachers , and the lack of state support . As their aspirations were unanimous in institutions and centers on the current situation of the creator is slowly improving, but it needs time and effort.

  15. Co-creators of memory, metaphors for resilience, and mechanisms for recovery: flora in living memorials to 9/11

    Science.gov (United States)

    Heather L. McMillen; Lindsay K. Campbell; Erika S. Svendsen

    2017-01-01

    Planting trees to mark the passing of events and people is a longstanding tradition around the world. To better understand the contemporary practices of memorialization through planting, we examine living memorials created in response to the events of September 11, 2001. As an extension of the U.S. Forest Service Living Memorials Project, we reviewed existing data (n...

  16. A web-based spatial decision supporting system (S-DSS) for grapevine quality: the viticultural tool of the SOILCONS-WEB Project

    Science.gov (United States)

    Manna, Piero; Bonfante, Antonello; Basile, Angelo; Langella, Giuliano; Agrillo, Antonietta; De Mascellis, Roberto; Florindo Mileti, Antonio; Minieri, Luciana; Orefice, Nadia; Terribile, Fabio

    2014-05-01

    The SOILCONSWEB Project aims to create a decision support system operating at the landscape scale (Spatial-DSS) for the protection and the management of soils in both agricultural and environmental issues; it is a cyber-infrastructure built on remote servers operating through the web at www.landconsultingweb.eu. It includes - among others - a series of tools specifically designed to a Viticulture aiming at high quality wines production. The system is realized thanks to a collaboration between the University of Naples Federico II, CNR ISAFoM, Ariespace srl and SeSIRCA-Campania Region within a 5-years LIFE+ project funded by European Community. The system includes tools based on modelling procedures at different level of complexity some of which specifically designed for viticulture issues. One of the implemented models arise from the original desktop based SWAP model (Kroes et al, 2008). It can be run "on the fly" through a very user friendly web-interface. The specific tool, thanks to the model based on the Richard's equation can produce data on vineyard water stress, simulating the soil water balances of the different soil types within an area of interest. Thanks to a specific program developed within the project activities, the Spatial-DSS every day acquires punctual weather data and automatically spatialize them with geostatistical approaches in order to use the data as input for the SPA (Soil Plant Atmosphere ) model running. In particular for defining the upper boundary condition (rainfall and temperatures to estimate ET0 by the Hargraves model). Soil hydraulic properties (47 soil profiles within the study area), also essential for modelling simulation, were measured in laboratory using the Wind's approach or estimated through HYPRES PTF. Water retention and hydraulic conductivity relationships were parameterized according to the van Genuchten-Mualem model; Decision makers (individuals, groups of interests and public bodies) through the DSS can have real

  17. General Mission Analysis Tool Project

    Data.gov (United States)

    National Aeronautics and Space Administration — OverviewGMAT is a feature rich system containing high fidelity space system models, optimization and targeting,built in scripting and programming infrastructure, and...

  18. The ClearEarth Project: Preliminary Findings from Experiments in Applying the CLEARTK NLP Pipeline and Annotation Tools Developed for Biomedicine to the Earth Sciences

    Science.gov (United States)

    Duerr, R.; Thessen, A.; Jenkins, C. J.; Palmer, M.; Myers, S.; Ramdeen, S.

    2016-12-01

    The ability to quickly find, easily use and effortlessly integrate data from a variety of sources is a grand challenge in Earth sciences, one around which entire research programs have been built. A myriad of approaches to tackling components of this challenge have been demonstrated, often with some success. Yet finding, assessing, accessing, using and integrating data remains a major challenge for many researchers. A technology that has shown promise in nearly every aspect of the challenge is semantics. Semantics has been shown to improve data discovery, facilitate assessment of a data set, and through adoption of the W3C's Linked Data Platform to have improved data integration and use at least for data amenable to that paradigm. Yet the creation of semantic resources has been slow. Why? Amongst a plethora of other reasons, it is because semantic expertise is rare in the Earth and Space sciences; the creation of semantic resources for even a single discipline is labor intensive and requires agreement within the discipline; best practices, methods and tools for supporting the creation and maintenance of the resources generated are in flux; and the human and financial capital needed are rarely available in the Earth sciences. However, other fields, such as biomedicine, have made considerable progress in these areas. The NSF-funded ClearEarth project is adapting the methods and tools from these communities for the Earth sciences in the expectation that doing so will enhance progress and the rate at which the needed semantic resources are created. We discuss progress and results to date, lessons learned from this adaptation process, and describe our upcoming efforts to extend this knowledge to the next generation of Earth and data scientists.

  19. Project Management

    DEFF Research Database (Denmark)

    Kampf, Constance

    2009-01-01

    In this video Associate Professor Constance Kampf talks about the importance project management. Not only as a tool in implementation, but also as a way of thinking, and as something that needs to be considered from idea conception......In this video Associate Professor Constance Kampf talks about the importance project management. Not only as a tool in implementation, but also as a way of thinking, and as something that needs to be considered from idea conception...

  20. Project-based learning strategy, supported by virtual mediations and computer tools in a poultry production course: case study in Agricultural Sciences

    Directory of Open Access Journals (Sweden)

    Luis Díaz S

    2017-12-01

    Full Text Available The project-based learning strategy, supported by virtual mediations and computer tools, was applied to 42 students of a program of Animal Science in the course poultry Production in which the degree of familiarization, academic productivity, e-mail asynchronous mediation, the domain of the excel spreadsheet and the appreciation against the implemented methodology. The results showed that 100% of the students did not know the learning strategy and showed fears at the beginning of the activity. The final grades obtained (4.44 ± 0.14, 38.09%; 3.67 ± 0.09; 38.09%; 2.8, 19.05%, delivered products and degree of achievement (100%, 31 students; 88.88%, 5 students; 77.77%, 3 students; 55.55%, 3 students were influenced by the degree of mastery of the spreadsheet (8 students showed mastery, 26 a basic level to elementary and scarce, the rest and the registered participation level. It was found that the strategy generated motivation in the students reflected in the accomplishment of the goals and objectives drawn at the beginning of the course, increased the student-teacher interaction and reached a high academic performance (final grades ≥3.7 in the majority of the participants (73.8%.

  1. To widen the action tools against the climatic change by domestic projects. Evaluation report; Elargir les instruments d'action contre le changement climatique grace aux projets domestiques. Rapport d'evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Arnaud, E; Dominicis, A de; Leguet, B; Leseur, A; Perthuis, Ch de

    2005-11-15

    In the framework of the climatic change fight, each country aims to implement tools of emissions reduction. In France, the european system of CO{sub 2} quotas exchange, applied on the more emitted installations, covers less than 30% of the national carbon emissions. The other 70% are free of taxes. The 'climate mission' realized an evaluation of the emission reduction in the case of a new policy aiming to develop domestic projects of emission control. This report presents the study and its conclusions: the domestic projects, the possibilities of these projects in the transportation agriculture and forests and building sectors, the implementing conditions.

  2. To widen the action tools against the climatic change by domestic projects. Evaluation report; Elargir les instruments d'action contre le changement climatique grace aux projets domestiques. Rapport d'evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Arnaud, E.; Dominicis, A. de; Leguet, B.; Leseur, A.; Perthuis, Ch. de

    2005-11-15

    In the framework of the climatic change fight, each country aims to implement tools of emissions reduction. In France, the european system of CO{sub 2} quotas exchange, applied on the more emitted installations, covers less than 30% of the national carbon emissions. The other 70% are free of taxes. The 'climate mission' realized an evaluation of the emission reduction in the case of a new policy aiming to develop domestic projects of emission control. This report presents the study and its conclusions: the domestic projects, the possibilities of these projects in the transportation agriculture and forests and building sectors, the implementing conditions.

  3. Erratum: Google Earth as Geoscience Data Browser Project: Development of a Tool to Convert JAMSTEC Research Vessel Navigation Data to KML [Data Science Journal, Volume 8, 30 March 2009. S85-S91

    Directory of Open Access Journals (Sweden)

    Y Yamagishi

    2009-07-01

    Full Text Available The following PDF indicates errata for the original article entitled "Google Earth as Geoscience Data Browser Project: Development of a Tool to Convert JAMSTEC Research Vessel Navigation Data to KML" by Y Yamagishi, H Nagao, K Suzuki, H Tamura, T Hatakeyama, H Yanaka and S Tsuboi.

  4. Target prioritization and strategy selection for active case-finding of pulmonary tuberculosis: a tool to support country-level project planning.

    Science.gov (United States)

    Nishikiori, Nobuyuki; Van Weezenbeek, Catharina

    2013-02-02

    Despite the progress made in the past decade, tuberculosis (TB) control still faces significant challenges. In many countries with declining TB incidence, the disease tends to concentrate in vulnerable populations that often have limited access to health care. In light of the limitations of the current case-finding approach and the global urgency to improve case detection, active case-finding (ACF) has been suggested as an important complementary strategy to accelerate tuberculosis control especially among high-risk populations. The present exercise aims to develop a model that can be used for county-level project planning. A simple deterministic model was developed to calculate the number of estimated TB cases diagnosed and the associated costs of diagnosis. The model was designed to compare cost-effectiveness parameters, such as the cost per case detected, for different diagnostic algorithms when they are applied to different risk populations. The model was transformed into a web-based tool that can support national TB programmes and civil society partners in designing ACF activities. According to the model output, tuberculosis active case-finding can be a costly endeavor, depending on the target population and the diagnostic strategy. The analysis suggests the following: (1) Active case-finding activities are cost-effective only if the tuberculosis prevalence among the target population is high. (2) Extensive diagnostic methods (e.g. X-ray screening for the entire group, use of sputum culture or molecular diagnostics) can be applied only to very high-risk groups such as TB contacts, prisoners or people living with human immunodeficiency virus (HIV) infection. (3) Basic diagnostic approaches such as TB symptom screening are always applicable although the diagnostic yield is very limited. The cost-effectiveness parameter was sensitive to local diagnostic costs and the tuberculosis prevalence of target populations. The prioritization of appropriate target

  5. Proliferation Resistance and Safeguards by Design: The Safeguardability Assessment Tool Provided by the INPRO Collaborative Project ''INPRO'' (Proliferation Resistance and Safeguardability Assessment)

    International Nuclear Information System (INIS)

    Haas, E.; Chang, H.-L.; Phillips, J.R.; Listner, C.

    2015-01-01

    Since the INPRO Collaborative Project on Proliferation Resistance and Safeguardability Assessment Tools (PROSA) was launched in 2011, Member State experts have worked with the INPRO Section and the IAEA Department of Safeguards to develop a revised methodology for self-assessment of sustainability in the area of proliferation resistance of a nuclear energy system (NES). With the common understanding that there is ''no proliferation resistance without safeguards'' the revised approach emphasizes the evaluation of a new 'User Requirement' for ''safeguardability'', that combines metrics of effective and efficient implementation of IAEA Safeguards including ''Safeguards-by-Design'' principles. The assessment with safeguardability as the key issue has been devised as a linear process evaluating the NES against a ''Basic Principle'' in the area of proliferation resistance, answering fundamental questions related to safeguards: 1) Do a State's legal commitments, policies and practices provide credible assurance of the exclusively peaceful use of the NES, including a legal basis for verification activities by the IAEA? 2) Does design and operation of the NES facilitate the effective and efficient implementation of IAEA safeguards? To answer those questions, a questionnaire approach has been developed that clearly identifies gaps and weaknesses. Gaps include prospects for improvements and needs for research and development. In this context, the PROSA approach assesses the safeguardability of a NES using a layered ''Evaluation Questionnaire'' that defines Evaluation Parameters (EP), EP-related questions, Illustrative Tests and Screening Questions to present and structure the evidence of findings. An integral part of the assessment process is Safeguards-by-Design, the identification of potential diversion, misuse and concealment strategies (coarse diversion path

  6. Development of a Phasor Diagram Creator to Visualize the Piston and Displacer Forces in an Advanced Stirling Convertor

    Science.gov (United States)

    Saha, Dipanjan; Lewandowski, Edward J.

    2013-01-01

    The steady state, nearly sinusoidal behavior of the components in a Free Piston Stirling Engine allows for visualization of the forces in the system using phasor diagrams. Based on Newton's second law, F=ma, any phasor diagrams modeling a given component in a system should close if all of the acting forces have been considered. Since the Advanced Stirling Radioisotope Generator (ASRG), currently being developed for future NASA deep space missions, is made up of such nearly sinusoidally oscillating components, its phasor diagrams would also be expected to close. A graphical user interface (GUI) has been written in MATLAB by taking user input data, passing it to Sage, a 1-D thermodynamic modeling program used to model the Stirling convertor, running Sage and then automatically plotting the phasor diagrams. Using this software tool, the effect of varying different Sage inputs on the phasor diagrams was determined. The parameters varied were piston amplitude, hot end temperature, cold end temperature, operating frequency, and displacer spring constant. By using these phasor diagrams, better insight can be gained as to why the convertor operates the way that it does.

  7. Development of a Phasor Diagram Creator to Visualize the Piston and Displacer Forces in an Advanced Stirling Convertor

    Science.gov (United States)

    Saha, Dipanjan; Lewandowski, Edward J.

    2013-01-01

    The steady-state, nearly sinusoidal behavior of the components in a free-piston Stirling engine allows for visualization of the forces in the system using phasor diagrams. Based on Newton's second law, F = ma, any phasor diagrams modeling a given component in a system should close if all of the acting forces have been considered. Since the Advanced Stirling Radioisotope Generator (ASRG), currently being developed for future NASA deep space missions, is made up of such nearly sinusoidally oscillating components, its phasor diagrams would also be expected to close. A graphical user interface (GUI) has been written in MATLAB (MathWorks), which takes user input data, passes it to Sage (Gedeon Associates), a one-dimensional thermodynamic modeling program used to model the Stirling convertor, runs Sage, and then automatically plots the phasor diagrams. Using this software tool, the effect of varying different Sage inputs on the phasor diagrams was determined. The parameters varied were piston amplitude, hot-end temperature, cold-end temperature, operating frequency, and displacer spring constant. These phasor diagrams offer useful insight into convertor operation and performance.

  8. Science serving people. IAEA-supported projects are helping countries apply the right tools to fight food, health, and water problems

    International Nuclear Information System (INIS)

    2002-01-01

    A new booklet 'Science Serving People' features stories about how IAEA-supported projects are making a difference in many poorer countries. The stories describe applications of nuclear science and technology that are being used through technical cooperation channels to overcome challenges of water scarcity, food shortage, malnutrition, malaria, environmental degradation and many other problems. They also illustrate how the complementary development, safety, and security initiatives of the IAEA are fostering atoms for peace in the developing world. Extreme poverty and deprivation remain a problem of monumental proportions at the dawn of the 21st century, notes IAEA Director General Mohamed ElBaradei in the booklet's Introduction. Through effective partnerships, collaborative research, and strategic direction, the IAEA is contributing to global efforts to help the poor. IAEA programmes have entered an important phase, he said, in which scientific contributions to Member States are yielding very sizeable human benefits. It's clear that science and technology must be better mobilized to meet the needs of the poor, emphasizes Jeffrey Sachs, Director of the Earth Institute at Columbia University, USA, and Special Advisor to UN Secretary-General Kofi Annan. The UN agencies, such as the IAEA, have a great role to play, he says in the booklet's Foreword. This is especially so, he points out, if they act as a bridge between the activities of advanced- country and developing country scientific centres, and if they help to harness the advances of world science for the poor as well as the rich. The bottom line, he concludes, is that rich countries should expand support for those United Nations organizations that can help in solving the unique problems confronting the world's poorest peoples. The booklet features stories on managing water resources, promoting food security, focusing science on health problems, new tools for environmental management, and strengthening nuclear

  9. Project management as a tool to implement the strategy, the realities and prospects of oil and gas enterprises in the Republic of Kazakhstan

    Directory of Open Access Journals (Sweden)

    Karim Medet Sapiuly

    2017-01-01

    Full Text Available Project leadership is an important part of organizations’ activities. Project management makes it possible to solve some business tasks more effectively than the means of traditional and operational management. Projects hold a key role in the implementation of the organization’s strategy. Using the project leadership approach yielded uniting the functional units of the organization in a whole single team to achieve the goals and indicators of the strategy. Employing of project management in commercial and government organizations gets common in the CIS countries, including Republic of Kazakhstan. It is revealed that the implementation of a strategic management system will make it possible to minimize the consequences of the economic crisis for the oil and gas producing companies of Kazakhstan. A specific feature of Kazakhstan’s oil and gas industry lays in management system based on a functional approach, insufficient level of strategic management system and project management implementation. It is established that there are significant prospects for the development of project management in the oil and gas industry of Kazakhstan. Adoption and optimization of project leadership at the enterprises of the oil and gas industry in Kazakhstan will lead to the appropriate implementation of a strategic management system. In this regard, following measures are suggested to implement by enterprises: development of unified industry standards for project leadership; design of a training system for managers and employees; implementation of the process approach in the company’s management system; design and implementation of a Project Management Office (PMO in the company; development of a fair and progressive employees incentive program based on key performance indicators (KPI; implementation of specialized software for project management. The fulfillment of the above suggestions will significantly improve efficiency of the project management system

  10. Perspectives on projects, project success and team work

    OpenAIRE

    Thompson, Karen

    2015-01-01

    This paper brings together perspectives on projects, project success and team work as a background to two graphical tools for considering project success and individual capabilities for working in a project team.

  11. Narrativa digital e infancia. La generación de los creadores colaborativos Digital and infancy narrative. The generation of collaborative creators

    Directory of Open Access Journals (Sweden)

    Javier Gil Quintana

    2016-01-01

    Full Text Available La naturaleza de los medios y lenguajes digitales ha posibilitado el desarrollo de diferentes técnicas que, en el canon del mundo analógico, se veían limitadas. Esta combinación ha originado, en los primeros años de vida del ser humano, nuevas formas de aprender envueltas en una nueva realidad. Las técnicas de creación que adquieren los niños en espacios alejados de cualquier currículo escolar, son desarrolladas gracias a su condición de ciudadanos de un contexto de sabios digitales; condición que trae intrínseco un conocimiento en el manejo tecnológico como de manera innata, convirtiendo la narrativa digital en el medio que ellos utilizan para aprender y comunicarse. Como consecuencia, en el modelo EMEREC más individualista se abre paso una generación de creadores colaborativos otorgando, por medio de la participación infantil, una mayor potencialidad a la ley de los tres tercios. The nature of media and digital languages has made it possible for the development of different techniques that, in the analog world were once restricted. As a result, with regards to early human learning techniques, this combination has transformed and implemented new ways of learning in a new reality. Creation techniques that children acquire in new spaces have been cut off from any curriculum, those of which have been developed thanks to their citizen’s condition in a sage digital context. This condition implies that an inherent technological and digital knowledge by storytelling is the method they use to learn and communicate. As a result, the EMIREC communication model is more individualistic and makes way for a new generation of collaborative creators and gives them, by the children's participation, a high potentiality to the three-thirds law.

  12. Hulpmiddelen voor de arbeidsorganisatie op grote melkveebedrijven : eindresultaat van het project "Meer mans met protocollen" = Tools for labor management on large dairy farms

    NARCIS (Netherlands)

    Zijlstra, J.; Poelarends, J.J.

    2009-01-01

    A study group of dairy farmers, employees of agricultural employment agencies and research workers in dairy farm management selected and developed nine tools to improve labor management on dairy farms in the Netherlands. The tools cover the fields of standard operating procedures, planning and labor

  13. Science, LCM AND communication tools for harmonised enironmental and social sustainability in the european food and drink chain – the SENSE Project

    DEFF Research Database (Denmark)

    Aransson, Anna; Landquist, Birgit; Sonesson, Ulf

    This paper presents the first outcome of the SENSE project (HarmoniSed ENvironmental Sustainability in the European food and drink chain). In Work Package (WP) 1 of the SENSE project eight key environmental impact categories has been identified as the most relevant for food supply chains...... and for each category a life cycle impact assessment methodology has been chosen to be used in the rest of the project. The feasibility to regionalize the characterization factors has also been investigated...

  14. 1,4-Dioxane Remediation by Extreme Soil Vapor Extraction (XSVE). Screening-Level Feasibility Assessment and Design Tool in Support of 1,4-Dioxane Remediation by Extreme Soil Vapor Extraction (XSVE) ESTCP Project ER 201326

    Science.gov (United States)

    2017-10-01

    USER GUIDE 1,4-Dioxane Remediation by Extreme Soil Vapor Extraction (XSVE) Screening-Level Feasibility Assessment and Design Tool in...Support of 1,4-Dioxane Remediation by Extreme Soil Vapor Extraction (XSVE) ESTCP Project ER-201326 OCTOBER 2017 Rob Hinchee Integrated Science...Technology, Inc. 1509 Coastal Highway Panacea, FL 32346 8/8/2013 - 8/8/2018 10-2017 1,4-Dioxane Remediation by Extreme Soil Vapor Extraction (XSVE) Screening

  15. Financing Alternatives Comparison Tool

    Science.gov (United States)

    FACT is a financial analysis tool that helps identify the most cost-effective method to fund a wastewater or drinking water management project. It produces a comprehensive analysis that compares various financing options.

  16. Criticism on Environmental Assessment Tools

    NARCIS (Netherlands)

    Abdalla, G.; Maas, G.J.; Huyghe, J.; Oostra, M.; Saji Baby, xx; Bogdan Zygmunt, xx

    2011-01-01

    Using environmental assessment tools to assess the sustainability of buildings, homes and mixed- use area is increasing. Environmental tools assign scores to projects using some sustainability (sub) aspects according to design and realization documents and evidences. Six European sustainable urban

  17. Report of the consultancy meeting for the coordinated research project on comparative analysis of methods and tools for nuclear knowledge preservation. Working material

    International Nuclear Information System (INIS)

    2006-01-01

    In response to long-term energy scenarios, it is necessary to preserve and maintain the accumulated knowledge in nuclear science and the nuclear industry. Within these scenarios is the reality of ageing of the human workforce in the nuclear sector and the sharp decline in the number of entrants to education and training in nuclear science and engineering. The challenge of the IAEA to this reality is to enhance the capacity of Member States to maintain and preserve the information and knowledge resources related to the peaceful use of nuclear energy. This knowledge could be tacit and/or explicit. Appendix A lists examples of tacit and explicit knowledge that need to be preserved. Finally, the need to manage, access and preserve this knowledge across human generations (30 years) and even nuclear facility lifetimes (over 60) years extends the challenges for the CRP. Implementation of the recommendations and conclusions from this CRP may be difficult due to resources, legal factors and legacy systems, but nevertheless the goal of nuclear knowledge preservation should be permanent access and knowledge resource interoperability that will allow knowledge sharing for as long as the knowledge remains useful. This Coordinated Research Project was started in the IAEA Program for the period 2004-2005 and continues for the 2006-2007, Programme C, Capacity Building and Nuclear Knowledge Maintenance for Sustainable Energy Development, Section C.3, Nuclear Knowledge Management and Section C.3.03, Maintenance and preservation of knowledge in specific areas of nuclear science and technology, specifically a 'CRP on knowledge preservation technologies leading to archiving of information'. The objectives of the consultancy were: - to review the CRP's Terms of Reference, research framework and specific research topics, and - to develop the survey form on current status of knowledge preservation to establish a baseline source of information on nuclear knowledge management in IAEA

  18. Emerging Technology Creator of Worlds

    Science.gov (United States)

    2016-01-01

    Strategic Studies Quarterly ♦ Fall 2016 or even sexual orientation . In the same way that science will redefine disease, society will redefine what...for this new destructive power was quite steep, and the technology has not been banned. Humanity also decided against the use of biological weapons

  19. Coral Reef Ecosystem Data from the 2010-2011 Kahekili Herbivore Fisheries Management Area, West Maui, Herbivore Enhancement as a Tool for Reef Restoration Project (NODC Accession 0082869)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This research targets the Hawaii Coral Reef Initiative (HCRI) Priority Area A: Kahekili, Maui: Herbivore Fisheries Management Area (KHFMA). The project goal was to...

  20. Onoufrios, the famous XVI's century iconographer, creator of the ``Berati School'': studying the technique and materials used in wall paintings of inscribed churches

    Science.gov (United States)

    Pavlidou, E.; Arapi, M.; Zorba, T.; Anastasiou, M.; Civici, N.; Stamati, F.; Paraskevopoulos, K. M.

    2006-06-01

    The study of the materials and techniques employed for wall painting, complementing the information from historical and aesthetic data, contributes to the integrated knowledge of the iconographer and his period. In the 16th century, regarding the iconography in the former Byzantine area, besides the School of Crete and Francos Catelanos and his school, a third artistic personality who also created his own school, Onoufrios, appeared in central Albania and expanded his activity as a painter to northern Greece as well as nearby areas, such as Ohrid. Inscriptions documenting the works of Onoufrios are found in some of the churches that he decorated with wall paintings: “St. Apostles” (1547) Kastoria Greece, “St. Nicolas” Shelcan Albania, “St. Paraskevi” (1554), Valsh Albania, while are attributed to him the church of “St. Theodores” in Berati, Albania (before 1547) and others. He is one of the best icon painters of the whole Balkan region, and the best painter that has ever worked in Albanian territory. Onoufrios managed to combine the local painting tradition with the best tradition of the eastern (Paleologian) and western (Italian) schools, resulting in a realistic and natural depiction. He is the creator of the “Berati School” that expanded to other parts of the peninsula. His individual character can be distinguished in the work of his students: his son Nikolaos (who inherited his style in painting), Onoufrios from Cyprus, etc. Based on careful observations, we extracted number of paint samples from wall paintings of three of the above mentioned churches. Ground and paint layers were examined using micro-FTIR, Optical Microscopy, TXRF and SEM-EDS, to characterize materials and methods used by the artist to create these works. Our findings in each church are discussed and compared with the others in order to understand how and with what material and resources the painter worked and how he developed his technique. The presence of calcium

  1. Open source tools for management and archiving of digital microscopy data to allow integration with patient pathology and treatment information.

    Science.gov (United States)

    Khushi, Matloob; Edwards, Georgina; de Marcos, Diego Alonso; Carpenter, Jane E; Graham, J Dinny; Clarke, Christine L

    2013-02-12

    Virtual microscopy includes digitisation of histology slides and the use of computer technologies for complex investigation of diseases such as cancer. However, automated image analysis, or website publishing of such digital images, is hampered by their large file sizes. We have developed two Java based open source tools: Snapshot Creator and NDPI-Splitter. Snapshot Creator converts a portion of a large digital slide into a desired quality JPEG image. The image is linked to the patient's clinical and treatment information in a customised open source cancer data management software (Caisis) in use at the Australian Breast Cancer Tissue Bank (ABCTB) and then published on the ABCTB website (http://www.abctb.org.au) using Deep Zoom open source technology. Using the ABCTB online search engine, digital images can be searched by defining various criteria such as cancer type, or biomarkers expressed. NDPI-Splitter splits a large image file into smaller sections of TIFF images so that they can be easily analysed by image analysis software such as Metamorph or Matlab. NDPI-Splitter also has the capacity to filter out empty images. Snapshot Creator and NDPI-Splitter are novel open source Java tools. They convert digital slides into files of smaller size for further processing. In conjunction with other open source tools such as Deep Zoom and Caisis, this suite of tools is used for the management and archiving of digital microscopy images, enabling digitised images to be explored and zoomed online. Our online image repository also has the capacity to be used as a teaching resource. These tools also enable large files to be sectioned for image analysis. The virtual slide(s) for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/5330903258483934.

  2. Open source tools for management and archiving of digital microscopy data to allow integration with patient pathology and treatment information

    Directory of Open Access Journals (Sweden)

    Khushi Matloob

    2013-02-01

    Full Text Available Abstract Background Virtual microscopy includes digitisation of histology slides and the use of computer technologies for complex investigation of diseases such as cancer. However, automated image analysis, or website publishing of such digital images, is hampered by their large file sizes. Results We have developed two Java based open source tools: Snapshot Creator and NDPI-Splitter. Snapshot Creator converts a portion of a large digital slide into a desired quality JPEG image. The image is linked to the patient’s clinical and treatment information in a customised open source cancer data management software (Caisis in use at the Australian Breast Cancer Tissue Bank (ABCTB and then published on the ABCTB website (http://www.abctb.org.au using Deep Zoom open source technology. Using the ABCTB online search engine, digital images can be searched by defining various criteria such as cancer type, or biomarkers expressed. NDPI-Splitter splits a large image file into smaller sections of TIFF images so that they can be easily analysed by image analysis software such as Metamorph or Matlab. NDPI-Splitter also has the capacity to filter out empty images. Conclusions Snapshot Creator and NDPI-Splitter are novel open source Java tools. They convert digital slides into files of smaller size for further processing. In conjunction with other open source tools such as Deep Zoom and Caisis, this suite of tools is used for the management and archiving of digital microscopy images, enabling digitised images to be explored and zoomed online. Our online image repository also has the capacity to be used as a teaching resource. These tools also enable large files to be sectioned for image analysis. Virtual Slides The virtual slide(s for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/5330903258483934

  3. From the Paper to the Tablet: On the Design of an AR-Based Tool for the Inspection of Pre-Fab Buildings. Preliminary Results of the SIRAE Project.

    Science.gov (United States)

    Portalés, Cristina; Casas, Sergio; Gimeno, Jesús; Fernández, Marcos; Poza, Montse

    2018-04-19

    Energy-efficient Buildings (EeB) are demanded in today’s constructions, fulfilling the requirements for green cities. Pre-fab buildings, which are modularly fully-built in factories, are a good example of this. Although this kind of building is quite new, the in situ inspection is documented using traditional tools, mainly based on paper annotations. Thus, the inspection process is not taking advantage of new technologies. In this paper, we present the preliminary results of the SIRAE project that aims to provide an Augmented Reality (AR) tool that can seamlessly aid in the regular processes of pre-fab building inspections to detect and eliminate the possible existing quality and energy efficiency deviations. In this regards, we show a description of the current inspection process and how an interactive tool can be designed and adapted to it. Our first results show the design and implementation of our tool, which is highly interactive and involves AR visualizations and 3D data-gathering, allowing the inspectors to quickly manage it without altering the way the inspection process is done. First trials on a real environment show that the tool is promising for massive inspection processes.

  4. From the Paper to the Tablet: On the Design of an AR-Based Tool for the Inspection of Pre-Fab Buildings. Preliminary Results of the SIRAE Project

    Science.gov (United States)

    Fernández, Marcos; Poza, Montse

    2018-01-01

    Energy-efficient Buildings (EeB) are demanded in today’s constructions, fulfilling the requirements for green cities. Pre-fab buildings, which are modularly fully-built in factories, are a good example of this. Although this kind of building is quite new, the in situ inspection is documented using traditional tools, mainly based on paper annotations. Thus, the inspection process is not taking advantage of new technologies. In this paper, we present the preliminary results of the SIRAE project that aims to provide an Augmented Reality (AR) tool that can seamlessly aid in the regular processes of pre-fab building inspections to detect and eliminate the possible existing quality and energy efficiency deviations. In this regards, we show a description of the current inspection process and how an interactive tool can be designed and adapted to it. Our first results show the design and implementation of our tool, which is highly interactive and involves AR visualizations and 3D data-gathering, allowing the inspectors to quickly manage it without altering the way the inspection process is done. First trials on a real environment show that the tool is promising for massive inspection processes. PMID:29671799

  5. Project management process.

    Science.gov (United States)

    2007-03-01

    This course provides INDOT staff with foundational knowledge and skills in project management principles and methodologies. INDOTs project management processes provide the tools for interdisciplinary teams to efficiently and effectively deliver pr...

  6. Development and Evaluation of a Web Map Mind Tool Environment with the Theory of Spatial Thinking and Project-Based Learning Strategy

    Science.gov (United States)

    Hou, Huei-Tse; Yu, Tsai-Fang; Wu, Yi-Xuan; Sung, Yao-Ting; Chang, Kuo-En

    2016-01-01

    The theory of spatial thinking is relevant to the learning and teaching of many academic domains. One promising method to facilitate learners' higher-order thinking is to utilize a web map mind tool to assist learners in applying spatial thinking to cooperative problem solving. In this study, an environment is designed based on the theory of…

  7. Development of a national audit tool for juvenile idiopathic arthritis: a BSPAR project funded by the Health Care Quality Improvement Partnership.

    Science.gov (United States)

    McErlane, Flora; Foster, Helen E; Armitt, Gillian; Bailey, Kathryn; Cobb, Joanna; Davidson, Joyce E; Douglas, Sharon; Fell, Andrew; Friswell, Mark; Pilkington, Clarissa; Strike, Helen; Smith, Nicola; Thomson, Wendy; Cleary, Gavin

    2018-01-01

    Timely access to holistic multidisciplinary care is the core principle underpinning management of juvenile idiopathic arthritis (JIA). Data collected in national clinical audit programmes fundamentally aim to improve health outcomes of disease, ensuring clinical care is equitable, safe and patient-centred. The aim of this study was to develop a tool for national audit of JIA in the UK. A staged and consultative methodology was used across a broad group of relevant stakeholders to develop a national audit tool, with reference to pre-existing standards of care for JIA. The tool comprises key service delivery quality measures assessed against two aspects of impact, namely disease-related outcome measures and patient/carer reported outcome and experience measures. Eleven service-related quality measures were identified, including those that map to current standards for commissioning of JIA clinical services in the UK. The three-variable Juvenile Arthritis Disease Activity Score and presence/absence of sacro-iliitis in patients with enthesitis-related arthritis were identified as the primary disease-related outcome measures, with presence/absence of uveitis a secondary outcome. Novel patient/carer reported outcomes and patient/carer reported experience measures were developed and face validity confirmed by relevant patient/carer groups. A tool for national audit of JIA has been developed with the aim of benchmarking current clinical practice and setting future standards and targets for improvement. Staged implementation of this national audit tool should facilitate investigation of variability in levels of care and drive quality improvement. This will require engagement from patients and carers, clinical teams and commissioners of JIA services. © The Author 2017. Published by Oxford University Press on behalf of the British Society for Rheumatology.

  8. Development of a national audit tool for juvenile idiopathic arthritis: a BSPAR project funded by the Health Care Quality Improvement Partnership

    Science.gov (United States)

    McErlane, Flora; Foster, Helen E; Armitt, Gillian; Bailey, Kathryn; Cobb, Joanna; Davidson, Joyce E; Douglas, Sharon; Fell, Andrew; Friswell, Mark; Pilkington, Clarissa; Strike, Helen; Smith, Nicola; Thomson, Wendy; Cleary, Gavin

    2018-01-01

    Abstract Objective Timely access to holistic multidisciplinary care is the core principle underpinning management of juvenile idiopathic arthritis (JIA). Data collected in national clinical audit programmes fundamentally aim to improve health outcomes of disease, ensuring clinical care is equitable, safe and patient-centred. The aim of this study was to develop a tool for national audit of JIA in the UK. Methods A staged and consultative methodology was used across a broad group of relevant stakeholders to develop a national audit tool, with reference to pre-existing standards of care for JIA. The tool comprises key service delivery quality measures assessed against two aspects of impact, namely disease-related outcome measures and patient/carer reported outcome and experience measures. Results Eleven service-related quality measures were identified, including those that map to current standards for commissioning of JIA clinical services in the UK. The three-variable Juvenile Arthritis Disease Activity Score and presence/absence of sacro-iliitis in patients with enthesitis-related arthritis were identified as the primary disease-related outcome measures, with presence/absence of uveitis a secondary outcome. Novel patient/carer reported outcomes and patient/carer reported experience measures were developed and face validity confirmed by relevant patient/carer groups. Conclusion A tool for national audit of JIA has been developed with the aim of benchmarking current clinical practice and setting future standards and targets for improvement. Staged implementation of this national audit tool should facilitate investigation of variability in levels of care and drive quality improvement. This will require engagement from patients and carers, clinical teams and commissioners of JIA services. PMID:29069424

  9. Rainwater, a tool for development and maintenance of nature in the city - Three development projects illustrating the water as a support of natural processes in urban environment

    Directory of Open Access Journals (Sweden)

    Christian Piel

    2013-01-01

    Full Text Available The problems of manage urban stormwater are gradually taken into account by planners and landscapers. If the ecological potential of the temporary retention techniques is correctly operated in peri-urban areas, it is too little valued in a dense urban environment. Dense urban environment where the demand of nature is becoming stronger.Presented three projects in dense urban areas, where rainwater is treated as support nature, and as a factor in natural processes.These projects also aim to show how the problem of flood is a support social, legal, and financial, to implement these natural processes, so necessary in urban areas.

  10. Control Strategy Tool (CoST)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The EPA Control Strategy Tool (CoST) is a software tool for projecting potential future control scenarios, their effects on emissions and estimated costs. This tool...

  11. "Become a Reporter", the Four Skills News Project: Applying and Practising Language Skills Using Digital Tools for Level C1/C2 Students

    Science.gov (United States)

    Magedera-Hofhansl, Hanna

    2016-01-01

    The Four Skills News Project is an example of communicative language learning, developed for final year German students at the University of Liverpool. It focuses on how students use and practise their reading, writing, listening and speaking skills via the creative use of news reports and digital technology. Each student creates an avatar using…

  12. Project Planning and Implementation: Lessons Learned From the AQBMP Project

    National Research Council Canada - National Science Library

    1997-01-01

    ...). This NSRP report is funded as an addendum to the Air Quality Best Management Practices (AQBMP) project (N1 -944). The AQBMP project was completed using an intensive project planning process using a variety of quality management tools...

  13. IndexMed projects: new tools using the CIGESMED DataBase on Coralligenous for indexing, visualizing and data mining based on graphs

    OpenAIRE

    David , Romain; FERAL , Jean-Pierre; Archambeau , Anne; Bailly , Nicolas; Blanpain , Cyrille; Breton , Vincent; De Jode , Aurélie; Delavaud , Aurélie; Dias , Alrick; Gachet , Sophie; Guillemain , Dorian; Lecubin , Julien; Romier , Geneviève; Surace , Christian; Thierry De Ville D 'avray , Laure

    2016-01-01

    International audience; Data produced by the CIGESMED project (Coralligenous based Indicators to evaluate and monitor the "Good Environmental Status" of the MEDiterranean coastal waters) have a high potential for use by several stakeholders involved in environmental management. A new consortium called IndexMed whose task is to index Mediterranean biodiversity data, makes it possible to build graphs in order to analyse the CIGESMED data and develop new ways for data mining of coralligenous dat...

  14. Re-mastering the Master's Tools: Recognizing and affirming the life experiences and cultural practices of urban youth in critical computational literacy through a video game project

    OpenAIRE

    Lee, Clifford

    2012-01-01

    This study examines how a video game project that focuses on students' lived experiences and cultural practices teach critical literacies and computational thinking. Specifically, this research looked at how the pedagogy, processes, and student products demonstrated culturally relevant pedagogy practices, critical literacy, and computational thinking. This design-based research study utilizes critical literacy, sociocultural learning theory, and culturally relevant pedagogy in the framing, st...

  15. CO2 taxes as economic tool for energy efficiency analysis of CO2 tax impact on energy efficiency projects in Latvia

    International Nuclear Information System (INIS)

    Blumberga, D.; Blumberga, M.; Veidenbergs, I.

    2005-01-01

    The intended purpose of the carbon tax is to reduce CO 2 emissions. This tax can play a significant role in the implementation of energy saving projects. The paper evaluates three market mechanisms for reducing greenhouse gas emissions: joint implementation, emissions trading and CO 2 taxes. The first market mechanism - pilot phase of joint implementation (Activities Implemented Jointly) opened the minds of specialists to the GHG emission reduction potential of energy efficiency projects. The second mechanism was implemented after Latvia had accepted the National Allocation Plan to start emission trading. The third mechanism is based on the introduction of a carbon tax, which will come into force in Latvia in July 2005. This paper describes the potential impact of this tax that could promote development of energy efficiency projects. The authors worked out an evaluation methodology to calculate the impact of CO 2 taxes on emissions levels and the potential value of such taxes. The proposed methodology is applicable to district heating companies and governmental institutions, defining links between the energy efficiency and CO 2 taxes and showing ways of justifying these taxes both economically and environmentally. (authors)

  16. Data quality control and tools in passive seismic experiments exemplified on the Czech broadband seismic pool MOBNET in the AlpArray collaborative project

    Science.gov (United States)

    Vecsey, Luděk; Plomerová, Jaroslava; Jedlička, Petr; Munzarová, Helena; Babuška, Vladislav; AlpArray Working Group

    2017-12-01

    This paper focuses on major issues related to the data reliability and network performance of 20 broadband (BB) stations of the Czech (CZ) MOBNET (MOBile NETwork) seismic pool within the AlpArray seismic experiments. Currently used high-resolution seismological applications require high-quality data recorded for a sufficiently long time interval at seismological observatories and during the entire time of operation of the temporary stations. In this paper we present new hardware and software tools we have been developing during the last two decades while analysing data from several international passive experiments. The new tools help to assure the high-quality standard of broadband seismic data and eliminate potential errors before supplying data to seismological centres. Special attention is paid to crucial issues like the detection of sensor misorientation, timing problems, interchange of record components and/or their polarity reversal, sensor mass centring, or anomalous channel amplitudes due to, for example, imperfect gain. Thorough data quality control should represent an integral constituent of seismic data recording, preprocessing, and archiving, especially for data from temporary stations in passive seismic experiments. Large international seismic experiments require enormous efforts from scientists from different countries and institutions to gather hundreds of stations to be deployed in the field during a limited time period. In this paper, we demonstrate the beneficial effects of the procedures we have developed for acquiring a reliable large set of high-quality data from each group participating in field experiments. The presented tools can be applied manually or automatically on data from any seismic network.

  17. The cost-effectiveness of quality improvement projects: a conceptual framework, checklist and online tool for considering the costs and consequences of implementation-based quality improvement.

    Science.gov (United States)

    Thompson, Carl; Pulleyblank, Ryan; Parrott, Steve; Essex, Holly

    2016-02-01

    In resource constrained systems, decision makers should be concerned with the efficiency of implementing improvement techniques and technologies. Accordingly, they should consider both the costs and effectiveness of implementation as well as the cost-effectiveness of the innovation to be implemented. An approach to doing this effectively is encapsulated in the 'policy cost-effectiveness' approach. This paper outlines some of the theoretical and practical challenges to assessing policy cost-effectiveness (the cost-effectiveness of implementation projects). A checklist and associated (freely available) online application are also presented to help services develop more cost-effective implementation strategies. © 2015 John Wiley & Sons, Ltd.

  18. The REFUEL EU road map for biofuels in transport: Application of the project's tools to some short-term policy issues

    International Nuclear Information System (INIS)

    Londo, Marc; Lensink, Sander; Wakker, Andre; Fischer, Guenther; Prieler, Sylvia; van Velthuizen, Harrij; de Wit, Marc; Faaij, Andre; Junginger, Martin; Berndes, Goeran; Hansson, Julia; Egeskog, Andrea; Duer, Henrik; Lundbaek, Jeppe; Wisniewski, Grzegorz; Kupczyk, Adam; Koenighofer, Kurt

    2010-01-01

    The current hot debate on biofuels calls for a balanced and realistic long-term strategy for biofuels. The REFUEL project provides several ingredients for such a strategy. Analyses in this project indicate that domestically produced biofuels can cover a significant share of EU fuel demand in the coming decades, with the EU-12 new member states and Ukraine as most promising regions. This potential can be realised with residual streams and on existing agricultural land, without conversion of e.g. nature reserves. Second generation biofuels are essential for the long-term success of biofuels due to their superior performance in many ways. But generally, the key challenge for the near future would be how to enhance the development of biofuels in a responsible way, i.e. stimulating the production chains with the best performance, and preventing negative impacts e.g., by paying careful attention to possible system impacts of biofuel production such as indirect land use changes and rising food prices. Finally, 2nd generation biofuels require specific policy: the precursor role of 1st generation is overrated, both in technical terms as well as in their role as market precursors. When it comes to synergies, 2nd generation biofuels might benefit more from other developments in the energy sector, such as initiatives in co-firing of biomass for (heat and) power, than from 1st generation biofuels, also because of the public resistance that the latter induce. (author)

  19. Safety assessment methodologies for near surface disposal facilities. Results of a co-ordinated research project (ISAM). Volume 1: Review and enhancement of safety assessment approaches and tools. Volume 2: Test cases

    International Nuclear Information System (INIS)

    2004-07-01

    For several decades, countries have made use of near surface facilities for the disposal of low and intermediate level radioactive waste. In line with the internationally agreed principles of radioactive waste management, the safety of these facilities needs to be ensured during all stages of their lifetimes, including the post-closure period. By the mid 1990s, formal methodologies for evaluating the long term safety of such facilities had been developed, but intercomparison of these methodologies had revealed a number of discrepancies between them. Consequently, in 1997, the International Atomic Energy Agency launched a Co-ordinated Research Project (CRP) on Improvement of Safety Assessment Methodologies for Near Surface Disposal Facilities (ISAM). The particular objectives of the CRP were to provide a critical evaluation of the approaches and tools used in post-closure safety assessment for proposed and existing near-surface radioactive waste disposal facilities, enhance the approaches and tools used and build confidence in the approaches and tools used. The CRP ran until 2000 and resulted in the development of a harmonized assessment methodology (the ISAM project methodology), which was applied to a number of test cases. Over seventy participants from twenty-two Member States played an active role in the project and it attracted interest from around seven hundred persons involved with safety assessment in seventy-two Member States. The results of the CRP have contributed to the Action Plan on the Safety of Radioactive Waste Management which was approved by the Board of Governors and endorsed by the General Conference in September 2001. Specifically, they contribute to Action 5, which requests the IAEA Secretariat to 'develop a structured and systematic programme to ensure adequate application of the Agency's waste safety standards', by elaborating on the Safety Requirements on 'Near Surface Disposal of Radioactive Waste' (Safety Standards Series No. WS-R-1) and

  20. Development Status of the WetLab-2 Project: New Tools for On-orbit Real-time Quantitative Gene Expression.

    Science.gov (United States)

    Jung, Jimmy; Parra, Macarena P.; Almeida, Eduardo; Boone, Travis; Chinn, Tori; Ricco, Antonio; Souza, Kenneth; Hyde, Liz; Rukhsana, Yousuf; Richey, C. Scott

    2013-01-01

    The primary objective of NASA Ames Research Centers WetLab-2 Project is to place on the ISS a research platform to facilitate gene expression analysis via quantitative real-time PCR (qRT-PCR) of biological specimens grown or cultured on orbit. The WetLab-2 equipment will be capable of processing multiple sample types ranging from microbial cultures to animal tissues dissected on-orbit. In addition to the logistical benefits of in-situ sample processing and analysis, conducting qRT-PCR on-orbit eliminates the confounding effects on gene expression of reentry stresses and shock acting on live cells and organisms. The system can also validate terrestrial analyses of samples returned from ISS by providing quantitative on-orbit gene expression benchmarking prior to sample return. The ability to get on orbit data will provide investigators with the opportunity to adjust experimental parameters for subsequent trials based on the real-time data analysis without need for sample return and re-flight. Finally, WetLab-2 can be used for analysis of air, surface, water, and clinical samples to monitor environmental contaminants and crew health. The verification flight of the instrument is scheduled to launch on SpaceX-5 in Aug. 2014.Progress to date: The WetLab-2 project completed a thorough study of commercially available qRT-PCR systems and performed a downselect based on both scientific and engineering requirements. The selected instrument, the Cepheid SmartCycler, has advantages including modular design (16 independent PCR modules), low power consumption, and rapid ramp times. The SmartCycler has multiplex capabilities, assaying up to four genes of interest in each of the 16 modules. The WetLab-2 team is currently working with Cepheid to modify the unit for housing within an EXPRESS rack locker on the ISS. This will enable the downlink of data to the ground and provide uplink capabilities for programming, commanding, monitoring, and instrument maintenance. The project is

  1. Coast Guard Enterprise Project Management (CG-EPM)

    Data.gov (United States)

    Department of Homeland Security — CG-EPM provides the following capabilities: A Project Center, Portfolio Analysis Tools, Project Planning Tool, Web-based Project Plan Updater, Project Collaboration...

  2. Data quality control and tools in passive seismic experiments exemplified on Czech broad-band seismic pool MOBNET in the AlpArray collaborative project

    Czech Academy of Sciences Publication Activity Database

    Vecsey, Luděk; Plomerová, Jaroslava; Jedlička, Petr; Munzarová, Helena; Babuška, Vladislav

    2017-01-01

    Roč. 6, č. 2 (2017), s. 505-521 ISSN 2193-0856 R&D Projects: GA MŠk LM2010008; GA MŠk(CZ) LM2015079; GA MŠk(CZ) LD15029; GA MŠk(CZ) EF16_013/0001800 Grant - others:AV ČR(CZ) M100121201 Program:Program interní podpory projektů mezinárodní spolupráce AV ČR Institutional support: RVO:67985530 Keywords : Rayleigh-wave polarization * seismometer orientation * data quality * AlpArray * seismic noise Subject RIV: DC - Siesmology, Volcanology, Earth Structure OBOR OECD: Volcanology Impact factor: 1.023, year: 2016

  3. Newborn Survival Case Study in Rwanda - Bottleneck Analysis and Projections in Key Maternal and Child Mortality Rates Using Lives Saved Tool (LiST).

    Science.gov (United States)

    Khurmi, Manpreet Singh; Sayinzoga, Felix; Berhe, Atakilt; Bucyana, Tatien; Mwali, Assumpta Kayinamura; Manzi, Emmanuel; Muthu, Maharajan

    2017-01-01

    The Newborn Survival Case study in Rwanda provides an analysis of the newborn health and survival situation in the country. It reviews evidence-based interventions and coverage levels already implemented in the country; identifies key issues and bottlenecks in service delivery and uptake of services by community/beneficiaries, and provides key recommendations aimed at faster reduction in newborn mortality rate. This study utilized mixed method research including qualitative and quantitative analyses of various maternal and newborn health programs implemented in the country. This included interviewing key stakeholders at each level, field visits and also interviewing beneficiaries for assessment of uptake of services. Monitoring systems such as Health Management Information Systems (HMIS), maternal and newborn death audits were reviewed and data analyzed to aid these analyses. Policies, protocols, various guidelines and tools for monitoring are already in place however, implementation of these remains a challenge e.g. infection control practices to reduce deaths due to sepsis. Although existing staff are quite knowledgeable and are highly motivated, however, shortage of health personnel especially doctors in an issue. New facilities are being operationalized e.g. at Gisenyi, however, the existing facilities needs expansion. It is essential to implement high impact evidence based interventions but coverage levels need to be significantly high in order to achieve higher reduction in newborn mortality rate. Equity approach should be considered in planning so that the services are better implemented and the poor and needy can get the benefits of public health programs.

  4. Constantly operating geoinformation system for geoenvironment as a tool for pre-project investigations in city infrastructure development (on the example of moscow

    Directory of Open Access Journals (Sweden)

    Belyaev Valeriy L’vovich

    2016-02-01

    Full Text Available The concept of a geoinformation system for urban geoenvironment is concerned. Geological data is necessary for the sustainable development of city infrastructure. The municipal departments should use geological and environmental information for perspective planning, selecting the location for important infrastructure objects, solving ecologycal problems, and in decision making. The concept includes a preliminary list of system’s users, their informational needs, main functionalities, methodical approaches to the system design and development. Geological data must contain source documents from geological archives “as is” and geodata based on its interpretation for various tasks. These data must be checked carefully and updated with new engineering-geological investigations. Geoinformation system must integrate various geological, engineering-geological, hydrogeological, and environmental data. Sophisticated procedures must be provided to check complicated logical dependences in the system database and to analyze contradictions between source documents. 3D modeling is an adequate language for presenting geological data, therefore, the considered system must include 3D models of various scales. In the suggested concept 3D modeling is considered as a tool for investigations, not only for presentations. The end users should have possibilities to get results of their queries in various formats: tables, geological and thematic maps, geological cross-sections, 2D and 3D grids as source data for mathematical modeling, etc. In conclusion, the paper briefly describes IEG RAS activities in GIS technologies for geological cartography and 3D modeling.

  5. Overview: oxidant and particle photochemical processes above a south-east Asian tropical rainforest (the OP3 project: introduction, rationale, location characteristics and tools

    Directory of Open Access Journals (Sweden)

    C. N. Hewitt

    2010-01-01

    Full Text Available In April–July 2008, intensive measurements were made of atmospheric composition and chemistry in Sabah, Malaysia, as part of the "Oxidant and particle photochemical processes above a South-East Asian tropical rainforest" (OP3 project. Fluxes and concentrations of trace gases and particles were made from and above the rainforest canopy at the Bukit Atur Global Atmosphere Watch station and at the nearby Sabahmas oil palm plantation, using both ground-based and airborne measurements. Here, the measurement and modelling strategies used, the characteristics of the sites and an overview of data obtained are described. Composition measurements show that the rainforest site was not significantly impacted by anthropogenic pollution, and this is confirmed by satellite retrievals of NO2 and HCHO. The dominant modulators of atmospheric chemistry at the rainforest site were therefore emissions of BVOCs and soil emissions of reactive nitrogen oxides. At the observed BVOC:NOx volume mixing ratio (~100 pptv/pptv, current chemical models suggest that daytime maximum OH concentrations should be ca. 105 radicals cm−3, but observed OH concentrations were an order of magnitude greater than this. We confirm, therefore, previous measurements that suggest that an unexplained source of OH must exist above tropical rainforest and we continue to interrogate the data to find explanations for this.

  6. Emergency Department Sickle Cell Assessment of Needs and Strengths (ED-SCANS), a Focus Group and Decision Support Tool Development Project

    Science.gov (United States)

    Tanabe, Paula; Reddin, Christopher; Thornton, Victoria L.; Todd, Knox H.; Wun, Ted; Lyons, John S.

    2010-01-01

    Objectives A decision support tool may guide emergency clinicians in recognizing assessment, analgesic and overall management, and health service delivery needs for patients with sickle cell disease (SCD) in the emergency department (ED). We aimed to identify data and process elements important in making decisions regarding evaluation and management of adult patients in the ED with painful episodes of sickle cell disease. Methods Qualitative methods using a series of focus groups and grounded theory were used. Eligible participants included adult clients with SCD, and emergency physicians and nurses with a minimum of one year of experience providing care to patients with SCD in the ED. Patients were recruited in conjunction with annual SCD meetings, and providers included clinicians who were and were not affiliated with sickle cell centers. Groups were conducted until saturation was reached, and included a total of two patient groups, three physician groups, and two nurse groups. Focus groups were held in New York, Durham, Chicago, New Orleans, and Denver. Clinician participants were asked the following three questions to guide the discussion: 1) what information would be important to know about patients with SCD in the ED setting to effectively care for them and help you identify patient analgesic, treatment, and referral needs? 2) what treatment decisions would you make with this information? and 3) what characteristics would a decision support tool need to have to make it meaningful and useful? Client participants were asked the same questions with re-wording to reflect what they believed providers should know to provide the best care, and what they should do with the information. All focus groups were audio taped and transcribed. The constant comparative method was used to analyze the data. Two coders independently coded participant responses and identified focal themes based on the key questions. An investigator and assistant independently reviewed the

  7. Legal instruments for an optimal utilization of information and technology under the Intellectual Property Regime : A Study on the Implication of the Creator and Inventor Doctrine for the Utilization of Intellectual Products through Technology Transfer for the Greatest Benefit of People in Indonesia

    NARCIS (Netherlands)

    Haq, L.M.H.

    2011-01-01

    Evaluating the consequences of the existing creator and inventor doctrine on access to information and technology (IT), this dissertation investigates the ways to find, particularly in Indonesia, the most adequate legal protection that may bridge public interest and private interest in this respect.

  8. Pneumocafé project: an inquiry on current COPD diagnosis and management among General Practitioners in Italy through a novel tool for professional education.

    Science.gov (United States)

    Sanguinetti, Claudio M; De Benedetto, Fernando; Donner, Claudio F; Nardini, Stefano; Visconti, Alberto

    2014-01-01

    Symptoms of COPD are frequently disregarded by patients and also by general practitioners (GPs) in early stages of the disease, that consequently is diagnosed when already at an advanced grade of severity. Underdiagnosis and undertreatment of COPD and scarce use of spirometry are widely recurrent, while a better knowledge of the disease and a wider use of spirometry would be critical to diagnose more patients still neglected, do it at an earlier stage and properly treat established COPD. The aim of Pneumocafè project is to improve, through an innovative approach, the diagnosis and management of COPD at primary care level increasing the awareness of issues pertaining to early diagnosis, adequate prevention and correct treatment of the disease. Pneumocafè is based on informal meetings between GPs of various geographical zones of Italy and their reference respiratory specialist (RS), aimed at discussing the current practice in comparison to suggestions of official guidelines, analyzing the actual problems in diagnosing and managing COPD patients and sharing the possible solution at the community level. In these meetings RSs faced many issues including patho-physiological mechanisms of bronchial obstruction, significance of clinical symptoms, patients' phenotyping, and clinical approach to diagnosis and long-term treatment, also reinforcing the importance of a timely diagnosis, proper long term treatment and the compliance to treatment. At the end of each meeting GPs had to fill in a questionnaire arranged by the scientific board of the Project that included 18 multiple-choice questions concerning their approach to COPD management. The results of the analysis of these questionnaires are here presented. 1, 964 questionnaires were returned from 49 RSs. 1,864 questionnaires out of those received (94.91% of the total) resulted properly compiled and form the object of the present analysis. The 49 RSs, 37 males and 12 females, were distributed all over the Italian country

  9. Simulation tools

    CERN Document Server

    Jenni, F

    2006-01-01

    In the last two decades, simulation tools made a significant contribution to the great progress in development of power electronics. Time to market was shortened and development costs were reduced drastically. Falling costs, as well as improved speed and precision, opened new fields of application. Today, continuous and switched circuits can be mixed. A comfortable number of powerful simulation tools is available. The users have to choose the best suitable for their application. Here a simple rule applies: The best available simulation tool is the tool the user is already used to (provided, it can solve the task). Abilities, speed, user friendliness and other features are continuously being improved—even though they are already powerful and comfortable. This paper aims at giving the reader an insight into the simulation of power electronics. Starting with a short description of the fundamentals of a simulation tool as well as properties of tools, several tools are presented. Starting with simplified models ...

  10. Database of tsunami scenario simulations for Western Iberia: a tool for the TRIDEC Project Decision Support System for tsunami early warning

    Science.gov (United States)

    Armigliato, Alberto; Pagnoni, Gianluca; Zaniboni, Filippo; Tinti, Stefano

    2013-04-01

    TRIDEC is a EU-FP7 Project whose main goal is, in general terms, to develop suitable strategies for the management of crises possibly arising in the Earth management field. The general paradigms adopted by TRIDEC to develop those strategies include intelligent information management, the capability of managing dynamically increasing volumes and dimensionality of information in complex events, and collaborative decision making in systems that are typically very loosely coupled. The two areas where TRIDEC applies and tests its strategies are tsunami early warning and industrial subsurface development. In the field of tsunami early warning, TRIDEC aims at developing a Decision Support System (DSS) that integrates 1) a set of seismic, geodetic and marine sensors devoted to the detection and characterisation of possible tsunamigenic sources and to monitoring the time and space evolution of the generated tsunami, 2) large-volume databases of pre-computed numerical tsunami scenarios, 3) a proper overall system architecture. Two test areas are dealt with in TRIDEC: the western Iberian margin and the eastern Mediterranean. In this study, we focus on the western Iberian margin with special emphasis on the Portuguese coasts. The strategy adopted in TRIDEC plans to populate two different databases, called "Virtual Scenario Database" (VSDB) and "Matching Scenario Database" (MSDB), both of which deal only with earthquake-generated tsunamis. In the VSDB we simulate numerically few large-magnitude events generated by the major known tectonic structures in the study area. Heterogeneous slip distributions on the earthquake faults are introduced to simulate events as "realistically" as possible. The members of the VSDB represent the unknowns that the TRIDEC platform must be able to recognise and match during the early crisis management phase. On the other hand, the MSDB contains a very large number (order of thousands) of tsunami simulations performed starting from many different

  11. Tools for Authentication

    International Nuclear Information System (INIS)

    White, G.

    2008-01-01

    Many recent Non-proliferation and Arms Control software projects include a software authentication component. In this context, 'authentication' is defined as determining that a software package performs only its intended purpose and performs that purpose correctly and reliably over many years. In addition to visual inspection by knowledgeable computer scientists, automated tools are needed to highlight suspicious code constructs both to aid the visual inspection and to guide program development. While many commercial tools are available for portions of the authentication task, they are proprietary, and have limited extensibility. An open-source, extensible tool can be customized to the unique needs of each project (projects can have both common and custom rules to detect flaws and security holes). Any such extensible tool must be based on a complete language compiler infrastructure, that is, one that can parse and digest the full language through its standard grammar. ROSE is precisely such a compiler infrastructure developed within DOE. ROSE is a robust source-to-source analysis and optimization infrastructure currently addressing large, million-line DOE applications in C, C++, and FORTRAN. This year, it has been extended to support the automated analysis of binaries. We continue to extend ROSE to address a number of security-specific requirements and apply it to software authentication for Non-proliferation and Arms Control projects. We will give an update on the status of our work

  12. Tools for Authentication

    Energy Technology Data Exchange (ETDEWEB)

    White, G

    2008-07-09

    Many recent Non-proliferation and Arms Control software projects include a software authentication component. In this context, 'authentication' is defined as determining that a software package performs only its intended purpose and performs that purpose correctly and reliably over many years. In addition to visual inspection by knowledgeable computer scientists, automated tools are needed to highlight suspicious code constructs both to aid the visual inspection and to guide program development. While many commercial tools are available for portions of the authentication task, they are proprietary, and have limited extensibility. An open-source, extensible tool can be customized to the unique needs of each project (projects can have both common and custom rules to detect flaws and security holes). Any such extensible tool must be based on a complete language compiler infrastructure, that is, one that can parse and digest the full language through its standard grammar. ROSE is precisely such a compiler infrastructure developed within DOE. ROSE is a robust source-to-source analysis and optimization infrastructure currently addressing large, million-line DOE applications in C, C++, and FORTRAN. This year, it has been extended to support the automated analysis of binaries. We continue to extend ROSE to address a number of security-specific requirements and apply it to software authentication for Non-proliferation and Arms Control projects. We will give an update on the status of our work.

  13. Requirements for enrichment tools

    NARCIS (Netherlands)

    Boer, A.; Winkels, R.; Trompper, M.

    2016-01-01

    This report gives a high level overview of requirements for Enrichment tools in the Openlaws.eu project. Openlaws.eu aims to initiate a platform and develop a vision for Big Open Legal Data (BOLD): an open framework for legislation, case law, and legal literature from across Europe.

  14. Integrated project support environments the ASPECT project

    CERN Document Server

    Brown, Alan W

    1991-01-01

    A major part of software engineering developments involve the use of computing tools which facilitate the management, maintenance, security, and building of long-scale software engineer projects. Consequently, there have been a proliferation of CASE tools and IPSES. This book looks at IPSES in general and the ASPECT project in particular, providing design and implementation details, as well as locating ASPECT in IPSE developments.Survey of integrated project support environments for more efficient software engineering**Description of a large scale IPSE--ASPECT**Evaluation of formal methods in

  15. Managing clinical improvement projects.

    Science.gov (United States)

    Phillips, Joanna; Simmonds, Lorraine

    This paper, the second of a three-part series looking at change management tools, provides a practical guide on how to use common project management principles in practice. Much of the literature on project management focuses on the business arena, with little reference to clinical settings. Identifying this literature and understanding its relevance to managing projects in healthcare can be difficult. This article provides a practical guide to identifying the key principles of good project management and applying these in health settings.

  16. Using an evaluative tool to develop effective mathscasts

    Science.gov (United States)

    Galligan, Linda; Hobohm, Carola; Peake, Katherine

    2017-09-01

    This study is situated in a course designed for both on-campus and online pre-service and in-service teachers, where student-created mathscasts provide a way for university lecturers to assess students' quality of teaching, and understanding of mathematics. Teachers and pre-service teachers, in a university course with 90% online enrolment, were asked to create mathscasts to explain mathematics concepts at middle school level. This paper describes the process of developing and refining a tool for the creation and evaluation of quality student-produced mathscasts. The study then investigates the usefulness of the tool within the context of pedagogy and mathematical understanding. Despite an abundance of mathscasts already available on the web, there is merit in creating mathscasts, not only as a tool for teaching, but also as a means of learning by doing. The premise for creating student-produced mathscasts was to capture the creators' mathematical understanding and pedagogical approach to teaching a mathematical concept, which were then peer-assessed and graded. The analysis included surveys, practice mathscasts with peer- and self-reviews, and students' final assessed mathscasts. The results indicate that the use of the evaluative tool resulted in an improvement in quality of student-created mathscasts and critiques thereof. The paper concludes with a discussion on future directions of student-produced mathscasts.

  17. Digital storytelling: a tool for health promotion and cancer awareness in rural Alaskan communities

    Directory of Open Access Journals (Sweden)

    Melany Cueva

    2015-09-01

    Full Text Available Background: The purpose of this study was to learn community members’ perspectives about digital storytelling after viewing a digital story created by a Community Health Aide/Practitioner (CHA/P. Methods: Using a qualitative research design, we explored digital storytelling likeability as a health-messaging tool, health information viewers reported learning and, if viewing, cancer-related digital stories facilitated increased comfort in talking about cancer. In addition, we enquired if the digital stories affected how viewers felt about cancer, as well as if viewing the digital stories resulted in health behaviour change or intent to change health behaviour. Findings: A total of 15 adult community members participated in a 30–45 minute interview, 1–5 months post-viewing of a CHA/P digital story. The majority (13 of viewers interviewed were female, all were Alaska Native and they ranged in age from 25 to 54 years with the average age being 40 years. Due to the small size of communities, which ranged in population from 160 to 2,639 people, all viewers knew the story creator or knew of the story creator. Viewers reported digital stories as an acceptable, emotionally engaging way to increase their cancer awareness and begin conversations. These conversations often served as a springboard for reflection, insight, and cancer-prevention and risk-reduction activities.

  18. Digital storytelling: a tool for health promotion and cancer awareness in rural Alaskan communities.

    Science.gov (United States)

    Cueva, Melany; Kuhnley, Regina; Revels, Laura; Schoenberg, Nancy E; Dignan, Mark

    2015-01-01

    The purpose of this study was to learn community members' perspectives about digital storytelling after viewing a digital story created by a Community Health Aide/Practitioner (CHA/P). Using a qualitative research design, we explored digital storytelling likeability as a health-messaging tool, health information viewers reported learning and, if viewing, cancer-related digital stories facilitated increased comfort in talking about cancer. In addition, we enquired if the digital stories affected how viewers felt about cancer, as well as if viewing the digital stories resulted in health behaviour change or intent to change health behaviour. A total of 15 adult community members participated in a 30-45 minute interview, 1-5 months post-viewing of a CHA/P digital story. The majority (13) of viewers interviewed were female, all were Alaska Native and they ranged in age from 25 to 54 years with the average age being 40 years. Due to the small size of communities, which ranged in population from 160 to 2,639 people, all viewers knew the story creator or knew of the story creator. Viewers reported digital stories as an acceptable, emotionally engaging way to increase their cancer awareness and begin conversations. These conversations often served as a springboard for reflection, insight, and cancer-prevention and risk-reduction activities.

  19. Texas traffic thermostat software tool.

    Science.gov (United States)

    2013-04-01

    The traffic thermostat decision tool is built to help guide the user through a logical, step-wise, process of examining potential changes to their Manage Lane/toll facility. : **NOTE: Project Title: Application of the Traffic Thermostat Framework. Ap...

  20. Intelligent Tools and Instructional Simulations

    National Research Council Canada - National Science Library

    Murray, William R; Sams, Michelle; Belleville, Michael

    2001-01-01

    This intelligent tools and instructional simulations project was an investigation into the utility of a knowledge-based performance support system to support learning and on-task performance for using...

  1. Project mobilisation

    International Nuclear Information System (INIS)

    Clark, J.; Limbrick, A.

    1996-01-01

    This paper identifies and reviews the issues to be addressed and the procedures to be followed during the mobilisation of projects using LFG as an energy source. Knowledge of the procedures involved in project mobilisation, their sequence and probable timescales, is essential for efficient project management. It is assumed that the majority of projects will be situated on existing, licensed landfill sites and, in addition to complying with the relevant conditions of the waste management licence and original planning consent, any proposed developments on the site will require a separate planning consent. Experience in the UK indicates that obtaining planning permission rarely constitutes a barrier to the development of schemes for the utilisation of LFG. Even so, an appreciation of the applicable environmental and planning legislation is essential as this will enable the developer to recognise the main concerns of the relevant planning authority at an early stage of the project, resulting in the preparation of an informed and well-structured application for planning permission. For a LFG utilisation scheme on an existing landfill site, the need to carry out an environmental assessment (EA) as part of the application for planning permission will, in vitually all cases, be discretionary. Even if not deemed necessary by the planning authority, an EA is a useful tool at the planning application stage, to identify and address potential problems and to support discussions with bodies such as the Environment Agency, from whom consents or authorisations may be required. Carrying out an EA can thus provide for more cost-effective project development and enhanced environmental protection. Typically, the principal contractual arrangements, such as the purchase of gas or the sale of electricity, will have been established before the project mobilisation phase. However, there are many other contractural arrangements that must be established, and consents and permits that may be

  2. Integrated Radiation Analysis and Design Tools

    Data.gov (United States)

    National Aeronautics and Space Administration — The Integrated Radiation Analysis and Design Tools (IRADT) Project develops and maintains an integrated tool set that collects the current best practices, databases,...

  3. Fiscal 1998 research report. International measures project for rational energy use (Survey project of the analysis tool of Asian energy consumption efficiency); 1998 nendo chosa hokokusho. Kokusai energy shiyo gorika nado taisaku jigyo (Asia energy shohi koritsuka bunseki tool chosa jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    This project aims to prepare the inter-industry relations table and analysis model for energy analysis for every Asian country, and analyze the relation between energy consumption and industrial structure or final demand structure. The 1985 and 1990 inter-industry relations tables of each country were prepared in cooperation with the governmental organizations of China, Korea, Taiwan, Philippines, Thailand, Malaysia, Singapore and India. However, the 1987 and 1990 tables were prepared for China. In fiscal 1998, the project invited the representatives of each concerned organization, and held the international workshop together with Japanese specialists to discuss various issues related to not only table preparation but also data analysis. The following items were analyzed for every country: a change in final energy consumption, a dependence on coal in primary energy consumption, transfer of energy consumption to other energy resources, and an energy consumption rate in the whole industry. (NEDO)

  4. Understanding Applications of Project Planning and Scheduling in Construction Projects

    OpenAIRE

    AlNasseri, Hammad Abdullah

    2015-01-01

    Construction project life-cycle processes must be managed in a more effective and predictable way to meet project stakeholders’ needs. However, there is increasing concern about whether know-how effectively improves understanding of underlying theories of project management processes for construction organizations and their project managers. Project planning and scheduling are considered as key and challenging tools in controlling and monitoring project performance, but many worldwide constru...

  5. Program Management Tool

    Science.gov (United States)

    Gawadiak, Yuri; Wong, Alan; Maluf, David; Bell, David; Gurram, Mohana; Tran, Khai Peter; Hsu, Jennifer; Yagi, Kenji; Patel, Hemil

    2007-01-01

    The Program Management Tool (PMT) is a comprehensive, Web-enabled business intelligence software tool for assisting program and project managers within NASA enterprises in gathering, comprehending, and disseminating information on the progress of their programs and projects. The PMT provides planning and management support for implementing NASA programmatic and project management processes and requirements. It provides an online environment for program and line management to develop, communicate, and manage their programs, projects, and tasks in a comprehensive tool suite. The information managed by use of the PMT can include monthly reports as well as data on goals, deliverables, milestones, business processes, personnel, task plans, monthly reports, and budgetary allocations. The PMT provides an intuitive and enhanced Web interface to automate the tedious process of gathering and sharing monthly progress reports, task plans, financial data, and other information on project resources based on technical, schedule, budget, and management criteria and merits. The PMT is consistent with the latest Web standards and software practices, including the use of Extensible Markup Language (XML) for exchanging data and the WebDAV (Web Distributed Authoring and Versioning) protocol for collaborative management of documents. The PMT provides graphical displays of resource allocations in the form of bar and pie charts using Microsoft Excel Visual Basic for Application (VBA) libraries. The PMT has an extensible architecture that enables integration of PMT with other strategic-information software systems, including, for example, the Erasmus reporting system, now part of the NASA Integrated Enterprise Management Program (IEMP) tool suite, at NASA Marshall Space Flight Center (MSFC). The PMT data architecture provides automated and extensive software interfaces and reports to various strategic information systems to eliminate duplicative human entries and minimize data integrity

  6. Green Infrastructure Models and Tools

    Science.gov (United States)

    The objective of this project is to modify and refine existing models and develop new tools to support decision making for the complete green infrastructure (GI) project lifecycle, including the planning and implementation of stormwater control in urban and agricultural settings,...

  7. The production of audiovisual teaching tools in minimally invasive surgery.

    Science.gov (United States)

    Tolerton, Sarah K; Hugh, Thomas J; Cosman, Peter H

    2012-01-01

    Audiovisual learning resources have become valuable adjuncts to formal teaching in surgical training. This report discusses the process and challenges of preparing an audiovisual teaching tool for laparoscopic cholecystectomy. The relative value in surgical education and training, for both the creator and viewer are addressed. This audiovisual teaching resource was prepared as part of the Master of Surgery program at the University of Sydney, Australia. The different methods of video production used to create operative teaching tools are discussed. Collating and editing material for an audiovisual teaching resource can be a time-consuming and technically challenging process. However, quality learning resources can now be produced even with limited prior video editing experience. With minimal cost and suitable guidance to ensure clinically relevant content, most surgeons should be able to produce short, high-quality education videos of both open and minimally invasive surgery. Despite the challenges faced during production of audiovisual teaching tools, these resources are now relatively easy to produce using readily available software. These resources are particularly attractive to surgical trainees when real time operative footage is used. They serve as valuable adjuncts to formal teaching, particularly in the setting of minimally invasive surgery. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  8. Integrated Wind Power Planning Tool

    DEFF Research Database (Denmark)

    Rosgaard, M. H.; Hahmann, Andrea N.; Nielsen, T. S.

    This poster describes the status as of April 2012 of the Public Service Obligation (PSO) funded project PSO 10464 \\Integrated Wind Power Planning Tool". The project goal is to integrate a meso scale numerical weather prediction (NWP) model with a statistical tool in order to better predict short...... term power variation from off shore wind farms, as well as to conduct forecast error assessment studies in preparation for later implementation of such a feature in an existing simulation model. The addition of a forecast error estimation feature will further increase the value of this tool, as it...

  9. Project Identification and Formulation

    DEFF Research Database (Denmark)

    Lund, Søren; Lønholdt, Jens

    2005-01-01

    Provides the necessary conceptual framework and tools to assess all appropriate aspects of water and sanitation projects in developing countries. Appeals to graduate environmental engineering students, practitioners, economists, sociologists, and institutional planners working with water...... and sanitation projects in developing countries....

  10. Fundamentals of Project Management

    CERN Document Server

    Heagney, Joseph

    2011-01-01

    With sales of more than 160,000 copies, Fundamentals of Project Management has helped generations of project managers navigate the ins and outs of every aspect of this complex discipline. Using a simple step-by-step approach, the book is the perfect introduction to project management tools, techniques, and concepts. Readers will learn how to: ò Develop a mission statement, vision, goals, and objectives ò Plan the project ò Create the work breakdown structure ò Produce a workable schedule ò Understand earned value analysis ò Manage a project team ò Control and evaluate progress at every stage.

  11. Managing Projects with KPRO

    Science.gov (United States)

    Braden, Barry M.

    2004-01-01

    How does a Project Management Office provide: Consistent, familiar, easily used scheduling tools to Project Managers and project team members? Provide a complete list of organization resources available for use on the project? Facilitate resource tracking and visibility? Provide the myriad reports that the organization requires? Facilitate consistent budget planning and cost performance information? Provide all of this to the entire organization? Provide for the unique requirement of the organization? and get people to use it? Answer: Implementation of the Kennedy space Center Projects and Resources Online (KPRO), a modified COTS solution.

  12. GIS Tools to Estimate Average Annual Daily Traffic

    Science.gov (United States)

    2012-06-01

    This project presents five tools that were created for a geographical information system to estimate Annual Average Daily : Traffic using linear regression. Three of the tools can be used to prepare spatial data for linear regression. One tool can be...

  13. Authoring Tools

    Science.gov (United States)

    Treviranus, Jutta

    Authoring tools that are accessible and that enable authors to produce accessible Web content play a critical role in web accessibility. Widespread use of authoring tools that comply to the W3C Authoring Tool Accessibility Guidelines (ATAG) would ensure that even authors who are neither knowledgeable about nor particularly motivated to produce accessible content do so by default. The principles and techniques of ATAG are discussed. Some examples of accessible authoring tools are described including authoring tool content management components such as TinyMCE. Considerations for creating an accessible collaborative environment are also covered. As part of providing accessible content, the debate between system-based personal optimization and one universally accessible site configuration is presented. The issues and potential solutions to address the accessibility crisis presented by the advent of rich internet applications are outlined. This challenge must be met to ensure that a large segment of the population is able to participate in the move toward the web as a two-way communication mechanism.

  14. New Conceptual Design Tools

    DEFF Research Database (Denmark)

    Pugnale, Alberto; Holst, Malene Kirstine; Kirkegaard, Poul Henning

    2010-01-01

    hand, the main software houses are trying to introduce powerful and effective user-friendly applications in the world of building designers, that are more and more able to fit their specific requirements; on the other hand, some groups of expert users with a basic programming knowledge seem to deal......This paper aims to discuss recent approaches in using more and more frequently computer tools as supports for the conceptual design phase of the architectural project. The present state-of-the-art about software as conceptual design tool could be summarized in two parallel tendencies. On the one...... with the problem of software as conceptual design tool by means of 'scripting', in other words by self-developing codes able to solve specific and well defined design problems. Starting with a brief historical recall and the discussion of relevant researches and practical experiences, this paper investigates...

  15. PROJECT MANAGEMENT CONSIDERED IN A 2014 PERSPECTIVE

    OpenAIRE

    GRAPA ADELINA-ROXANA; SOARE ALICE-MAGDALENA

    2014-01-01

    Project Management has come of age, yet multiple surveys and reports confirm the fact that the majority of projects are challenged. Given the more demanding and strict financial constraints associated with the current fiscal climate, project management is regarded as a tool that can deliver more with less. The literature on Project Management shows that, in spite of advancement in Project Management processes, tools and systems, project success has not significantly improved. T...

  16. Report on FY 1998 project for international energy utilization rationalization, etc. (Project of the analytical tool survey for making energy consumption effective in Asia); 1998 nendo chosa hokokusho. Kokusai energy shiyo gorika nado taisaku jigyo (Asia energy shohi koritsuka bunseki tool chosa jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In the Asian region, for the purpose of grasping effects of both economic growth and effective energy consumption, an analytical tool added with a computational function was developed with the interindustrial relations table as database for the analysis of the present situation and the simulational analysis. In the analysis of the present situation, changes between the two time-points, 1985 and 1990, were analyzed using the developed energy consumption table and the CO2 emission table. The energy consumption amount is increasing with the growing economy. However, the energy unit consumption is decreasing in countries except Korea, the Philippines, Singapore and Malaysia. The trend is that the energy consumption is becoming effective and the CO2 emission amount is decreasing. As an example of simulating the introduction effect of energy saving technology, the simulation was conducted on the three: iron steel, paper/pulp, and cement in Indonesia. As a result, the decrease in energy consumption was shown in paper/pulp by 48%, in cement by 16%, and in iron/steel by 16%. The same was also indicated in CO2 emission. (NEDO)

  17. Survey report for fiscal 1998. International project for rationalizing energy use (a project for investigating analyzing a tool to improve energy consumption efficiency in Asia) (Data collection 1 (Year 1990 data)); 1998 nendo kokusai energy shiyo gorika nado taisaku jigyo chosa hokokusho. Asia energy shohi koritsuka bunseki tool chosa jigyo (shiryoshu 1 1990 nen data)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    With an objective to identify quantitatively the mutually influencing effect of economical development and energy consumption efficiency improvement in the entire Asia-Pacific region, a data collection was prepared according to the common industry classification as a tool to analyze energy consumption improvement in Asia. This data collection summarizes the industry relation tables and the energy relation tables available in eight Asian countries (Korea, Indonesia, Thailand, Philippines, China, Taiwan, Singapore and Malaysia) and Japan. Both kinds of the tables are unified in conception among the nations, hence comparable. The industry relation table consists of a basic transaction table, a charged coefficient table, a final demand converter table, an import coefficient table, a reverse matrix table, a sensitivity coefficient able, an influence force coefficient table, a production inducing amount table, a production inducing coefficient table, a production induction dependence table, an import inducing amount table, an import induction coefficient table, and an import induction dependence table. The energy table consists of an energy input table, an energy consumption table, and an emission table. (NEDO)

  18. Tool steels

    DEFF Research Database (Denmark)

    Højerslev, C.

    2001-01-01

    On designing a tool steel, its composition and heat treatment parameters are chosen to provide a hardened and tempered martensitic matrix in which carbides are evenly distributed. In this condition the matrix has an optimum combination of hardness andtoughness, the primary carbides provide...... resistance against abrasive wear and secondary carbides (if any) increase the resistance against plastic deformation. Tool steels are alloyed with carbide forming elements (Typically: vanadium, tungsten, molybdenumand chromium) furthermore some steel types contains cobalt. Addition of alloying elements...... serves primarily two purpose (i) to improve the hardenabillity and (ii) to provide harder and thermally more stable carbides than cementite. Assuming proper heattreatment, the properties of a tool steel depends on the which alloying elements are added and their respective concentrations....

  19. CMS offline web tools

    International Nuclear Information System (INIS)

    Metson, S; Newbold, D; Belforte, S; Kavka, C; Bockelman, B; Dziedziniewicz, K; Egeland, R; Elmer, P; Eulisse, G; Tuura, L; Evans, D; Fanfani, A; Feichtinger, D; Kuznetsov, V; Lingen, F van; Wakefield, S

    2008-01-01

    We describe a relatively new effort within CMS to converge on a set of web based tools, using state of the art industry techniques, to engage with the CMS offline computing system. CMS collaborators require tools to monitor various components of the computing system and interact with the system itself. The current state of the various CMS web tools is described along side current planned developments. The CMS collaboration comprises of nearly 3000 people from all over the world. As well as its collaborators, its computing resources are spread all over globe and are accessed via the LHC grid to run analysis, large scale production and data transfer tasks. Due to the distributed nature of collaborators effective provision of collaborative tools is essential to maximise physics exploitation of the CMS experiment, especially when the size of the CMS data set is considered. CMS has chosen to provide such tools over the world wide web as a top level service, enabling all members of the collaboration to interact with the various offline computing components. Traditionally web interfaces have been added in HEP experiments as an afterthought. In the CMS offline we have decided to put web interfaces, and the development of a common CMS web framework, on an equal footing with the rest of the offline development. Tools exist within CMS to transfer and catalogue data (PhEDEx and DBS/DLS), run Monte Carlo production (ProdAgent) and submit analysis (CRAB). Effective human interfaces to these systems are required for users with different agendas and practical knowledge of the systems to effectively use the CMS computing system. The CMS web tools project aims to provide a consistent interface to all these tools

  20. CMS offline web tools

    Energy Technology Data Exchange (ETDEWEB)

    Metson, S; Newbold, D [H.H. Wills Physics Laboratory, University of Bristol, Tyndall Avenue, Bristol BS8 1TL (United Kingdom); Belforte, S; Kavka, C [INFN, Sezione di Trieste (Italy); Bockelman, B [University of Nebraska Lincoln, Lincoln, NE (United States); Dziedziniewicz, K [CERN, Geneva (Switzerland); Egeland, R [University of Minnesota Twin Cities, Minneapolis, MN (United States); Elmer, P [Princeton (United States); Eulisse, G; Tuura, L [Northeastern University, Boston, MA (United States); Evans, D [Fermilab MS234, Batavia, IL (United States); Fanfani, A [Universita degli Studi di Bologna (Italy); Feichtinger, D [PSI, Villigen (Switzerland); Kuznetsov, V [Cornell University, Ithaca, NY (United States); Lingen, F van [California Institute of Technology, Pasedena, CA (United States); Wakefield, S [Blackett Laboratory, Imperial College, London (United Kingdom)

    2008-07-15

    We describe a relatively new effort within CMS to converge on a set of web based tools, using state of the art industry techniques, to engage with the CMS offline computing system. CMS collaborators require tools to monitor various components of the computing system and interact with the system itself. The current state of the various CMS web tools is described along side current planned developments. The CMS collaboration comprises of nearly 3000 people from all over the world. As well as its collaborators, its computing resources are spread all over globe and are accessed via the LHC grid to run analysis, large scale production and data transfer tasks. Due to the distributed nature of collaborators effective provision of collaborative tools is essential to maximise physics exploitation of the CMS experiment, especially when the size of the CMS data set is considered. CMS has chosen to provide such tools over the world wide web as a top level service, enabling all members of the collaboration to interact with the various offline computing components. Traditionally web interfaces have been added in HEP experiments as an afterthought. In the CMS offline we have decided to put web interfaces, and the development of a common CMS web framework, on an equal footing with the rest of the offline development. Tools exist within CMS to transfer and catalogue data (PhEDEx and DBS/DLS), run Monte Carlo production (ProdAgent) and submit analysis (CRAB). Effective human interfaces to these systems are required for users with different agendas and practical knowledge of the systems to effectively use the CMS computing system. The CMS web tools project aims to provide a consistent interface to all these tools.

  1. Oscillation Baselining and Analysis Tool

    Energy Technology Data Exchange (ETDEWEB)

    2017-03-27

    PNNL developed a new tool for oscillation analysis and baselining. This tool has been developed under a new DOE Grid Modernization Laboratory Consortium (GMLC) Project (GM0072 - “Suite of open-source applications and models for advanced synchrophasor analysis”) and it is based on the open platform for PMU analysis. The Oscillation Baselining and Analysis Tool (OBAT) performs the oscillation analysis and identifies modes of oscillations (frequency, damping, energy, and shape). The tool also does oscillation event baselining (fining correlation between oscillations characteristics and system operating conditions).

  2. General presentation of projects mechanisms

    International Nuclear Information System (INIS)

    2003-01-01

    This guide provides recommendations and tools to implement projects mechanisms, in the framework of the kyoto protocol. It precises the place of the projects mechanisms in the display of tools involved in the climatic change fight policies, at the national as international scale. It recalls the main characteristics and the rules of utilization and illustrates the corresponding interests. (A.L.B.)

  3. Development of Visualizations and Loggable Activities for the Geosciences. Results from Recent TUES Sponsored Projects

    Science.gov (United States)

    De Paor, D. G.; Bailey, J. E.; Whitmeyer, S. J.

    2012-12-01

    Our TUES research centers on the role of digital data, visualizations, animations, and simulations in undergraduate geoscience education. Digital hardware (smartphones, tablets, GPSs, GigaPan robotic camera mounts, etc.) are revolutionizing field data collection. Software products (GIS, 3-D scanning and modeling programs, virtual globes, etc.) have truly transformed the way geoscientists teach, learn, and do research. Whilst Google-Earth-style visualizations are famously user-friend for the person browsing, they can be notoriously unfriendly for the content creator. Therefore, we developed tools to help educators create and share visualizations as easily as if posting on Facebook. Anyone whoIf you wish to display geological cross sections on Google Earth, go to digitalplanet.org, upload image files, position them on a line of section, and share with the world through our KMZ hosting service. Other tools facilitate screen overlay and 3-D map symbol generation. We advocate use of such technology to enable undergraduate students to 'publish' their first mapping efforts even while they are working in the field. A second outcome of our TUES projects merges Second-Life-style interaction with Google Earth. We created games in which students act as first responders for natural hazard mitigation, prospectors for natural resource explorations, and structural geologist for map-making. Students are represented by avatars and collaborate by exchange of text messages - the natural mode of communication for the current generation. Teachers view logs showing student movements as well as transcripts of text messages and can scaffold student learning and geofence students to prevent wandering. Early results of in-class testing show positive learning outcomes. The third aspect of our program emphasizes dissemination. Experience shows that great effort is required to overcome activation energy and ensure adoption of new technology into the curriculum. We organized a GSA Penrose

  4. Vicissitudes of the Psychosocial Attention Institutional Projects to Victims of the Colombian Armed Conflict

    Directory of Open Access Journals (Sweden)

    Juan David Villa Gómez

    2017-01-01

    Full Text Available Understanding the subjective experiences of the professionals connected with intervention projects with victims of political violence in the psychosocial environment in the city of Medellin and other municipalities of the State of Antioquia, in terms of their experiences of ethical discomfort and emotional drain, for their participation in these projects, has helped us to identify the manner how these projects are built, their technocratic and bureaucratic common-sense, the problems in the execution and hiring times, as well as their limited contextualization and sensitivity to the reality of the affected communities, such a reality becomes a creator of harm and revictimization, which also damages the psychic and ethical integrity of those professionals.

  5. Statistical Techniques for Project Control

    CERN Document Server

    Badiru, Adedeji B

    2012-01-01

    A project can be simple or complex. In each case, proven project management processes must be followed. In all cases of project management implementation, control must be exercised in order to assure that project objectives are achieved. Statistical Techniques for Project Control seamlessly integrates qualitative and quantitative tools and techniques for project control. It fills the void that exists in the application of statistical techniques to project control. The book begins by defining the fundamentals of project management then explores how to temper quantitative analysis with qualitati

  6. Maya Studio Projects Photorealistic Characters

    CERN Document Server

    Palamar, Todd

    2011-01-01

    Create realistic characters with Maya tools and this project-based book Maya character generation tools are extremely sophisticated, and there's no better way to learn all their capabilities than by working through the projects in this hands-on book. This official guide focuses on understanding and implementing Maya's powerful tools for creating realistic characters for film, games, and TV. Use a variety of tools to create characters from skeleton to clothing, including hairstyles and facial hair, and learn how to use Performance Capture. A DVD includes supplementary videos, project support fi

  7. Design tools

    Science.gov (United States)

    Anton TenWolde; Mark T. Bomberg

    2009-01-01

    Overall, despite the lack of exact input data, the use of design tools, including models, is much superior to the simple following of rules of thumbs, and a moisture analysis should be standard procedure for any building envelope design. Exceptions can only be made for buildings in the same climate, similar occupancy, and similar envelope construction. This chapter...

  8. Energy life-cycle analysis modeling and decision support tool

    Energy Technology Data Exchange (ETDEWEB)

    Hoza, M.; White, M.E.

    1993-06-01

    As one of DOE`s five multi-program national laboratories, Pacific Northwest Laboratory (PNL) develops and deploys technology for national missions in energy and the environment. The Energy Information Systems Group, within the Laboratory`s Computer Sciences Department, focuses on the development of the computational and data communications infrastructure and automated tools for the Transmission and Distribution energy sector and for advanced process engineering applications. The energy industry is being forced to operate in new ways and under new constraints. It is in a reactive mode, reacting to policies and politics, and to economics and environmental pressures. The transmission and distribution sectors are being forced to find new ways to maximize the use of their existing infrastructure, increase energy efficiency, and minimize environmental impacts, while continuing to meet the demands of an ever increasing population. The creation of a sustainable energy future will be a challenge for both the soft and hard sciences. It will require that we as creators of our future be bold in the way we think about our energy future and aggressive in its development. The development of tools to help bring about a sustainable future will not be simple either. The development of ELCAM, for example, represents a stretch for the computational sciences as well as for each of the domain sciences such as economics, which will have to be team members.

  9. ENVISION Project

    CERN Multimedia

    Ballantine, A; Dixon-Altaber, H; Dosanjh, M; Kuchina, L

    2011-01-01

    Hadrontherapy is a highly advanced technique of cancer radiotherapy that uses beams of charged particles (ions) to destroy tumour cells. While conventional X-rays traverse the human body depositing radiation as they pass through, ions deliver most of their energy at one point. Hadrontherapy is most advantageous once the position of the tumour is accurately known, so that healthy tissues can be protected. Accurate positioning is a crucial challenge for targeting moving organs, as in lung cancer, and for adapting the irradiation as the tumour shrinks with treatment. Therefore, quality assurance becomes one of the most relevant issues for an effective outcome of the cancer treatment. In order to improve the quality assurance tools for hadrontherapy, the European Commission is funding ENVISION, a 4-year project that aims at developing solutions for: real-• time non invasive monitoring • quantitative imaging • precise determination of delivered dose • fast feedback for optimal treatment planning • real-t...

  10. Scheduling for decommissioning projects

    International Nuclear Information System (INIS)

    Podmajersky, O.E.

    1987-01-01

    This paper describes the Project Scheduling system being employed by the Decommissioning Operations Contractor at the Shippingport Station Decommissioning Project (SSDP). Results from the planning system show that the project continues to achieve its cost and schedule goals. An integrated cost and schedule control system (C/SCS) which uses the concept of earned value for measurement of performance was instituted in accordance with DOE orders. The schedule and cost variances generated by the C/SCS system are used to confirm management's assessment of project status. This paper describes the types of schedules and tools used on the SSDP project to plan and monitor the work, and identifies factors that are unique to a decommissioning project that make scheduling critical to the achievement of the project's goals. 1 fig

  11. Grid sleeve bulge tool

    International Nuclear Information System (INIS)

    Phillips, W.D.; Vaill, R.E.

    1980-01-01

    An improved grid sleeve bulge tool is designed for securing control rod guide tubes to sleeves brazed in a fuel assembly grid. The tool includes a cylinder having an outer diameter less than the internal diameter of the control rod guide tubes. The walls of the cylinder are cut in an axial direction along its length to provide several flexible tines or ligaments. These tines are similar to a fork except they are spaced in a circumferential direction. The end of each alternate tine is equipped with a semispherical projection which extends radially outwardly from the tine surface. A ram or plunger of generally cylindrical configuration and about the same length as the cylinder is designed to fit in and move axially of the cylinder and thereby force the tined projections outwardly when the ram is pulled into the cylinder. The ram surface includes axially extending grooves and plane surfaces which are complimentary to the inner surfaces formed on the tines on the cylinder. As the cylinder is inserted into a control rod guide tube, and the projections on the cylinder placed in a position just below or above a grid strap, the ram is pulled into the cylinder, thus moving the tines and the projections thereon outwardly into contact with the sleeve, to plastically deform both the sleeve and the control rod guide tube, and thereby form four bulges which extend outwardly from the sleeve surface and beyond the outer periphery of the grid peripheral strap. This process is then repeated at the points above the grid to also provide for outwardly projecting surfaces, the result being that the grid is accurately positioned on and mechanically secured to the control rod guide tubes which extend the length of a fuel assembly

  12. The JPL functional requirements tool

    Science.gov (United States)

    Giffin, Geoff; Skinner, Judith; Stoller, Richard

    1987-01-01

    Planetary spacecraft are complex vehicles which are built according to many thousands of requirements. Problems encountered in documenting and maintaining these requirements led to the current attempt to reduce or eliminate these problems by a computer automated data base Functional Requirements Tool. The tool developed at JPL and in use on several JPL Projects is described. The organization and functionality of the Tool, together with an explanation of the data base inputs, their relationships, and use are presented. Methods of interfacing with external documents, representation of tables and figures, and methods of approval and change processing are discussed. The options available for disseminating information from the Tool are identified. The implementation of the Requirements Tool is outlined, and the operation is summarized. The conclusions drawn from this work is that the Requirements Tool represents a useful addition to the System Engineer's Tool kit, it is not currently available elsewhere, and a clear development path exists to expand the capabilities of the Tool to serve larger and more complex projects.

  13. Project Management in Higher Education

    Science.gov (United States)

    Alpert, Shannon Atkinson

    2011-01-01

    This study identified factors that influenced the use of project management in higher education research projects. Using a qualitative grounded theory approach that included in-depth interviews with assistant professors, the researcher examined how these individuals were using project management processes and tools and factors that enabled,…

  14. Agile Project Management For Dummies

    CERN Document Server

    Layton, Mark C

    2012-01-01

    Be flexible and faster with Agile project management As mobile and web technologies continue to evolve rapidly, there is added pressure to develop and implement software projects in weeks instead of months. Agile Project Management For Dummies can make that happen. This is the first book to provide a simple, step-by-step guide to Agile Project Management approaches, tools, and techniques. With the fast pace of mobile and web technology development, software project development must keep pace; Agile Project Management enables developers to complete and implement projects more quickly and this b

  15. Project Notes

    Science.gov (United States)

    School Science Review, 1978

    1978-01-01

    Presents sixteen project notes developed by pupils of Chipping Norton School and Bristol Grammar School, in the United Kingdom. These Projects include eight biology A-level projects and eight Chemistry A-level projects. (HM)

  16. Quality improvement tools and processes.

    Science.gov (United States)

    Lau, Catherine Y

    2015-04-01

    The Model for Improvement and the Plan-Do-Study-Act cycle is a popular quality improvement (QI) tool for health care providers to successfully lead QI projects and redesign care processes. This tool has several distinct components that must be addressed in sequence to organize and critically evaluate improvement activities. Unlike other health sciences clinical research, QI projects and research are based on dynamic hypotheses that develop into observable, serial tests of change with continuous collection and feedback of performance data to stakeholders. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Environmental impact assessment screening tool

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities. 2 figs. 7 refs.

  18. Environmental impact assessment screening tool

    International Nuclear Information System (INIS)

    1995-05-01

    An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities

  19. Managing projects a team-based approach

    CERN Document Server

    Brown, Karen A

    2010-01-01

    Students today are likely to be assigned to project teams or to be project managers almost immediately in their first job. Managing Projects: A Team-Based Approach was written for a wide range of stakeholders, including project managers, project team members, support personnel, functional mangers who provide resources for projects, project customers (and customer representatives), project sponsors, project subcontractors, and anyone who plays a role in the project delivery process. The need for project management is on the rise as product life cycles compress, demand for IT systems increases, and business takes on an increasingly global character. This book adds to the project management knowledge base in a way that fills an unmet need—it shows how teams can apply many of the standard project management tools, as well as several tools that are relatively new to the field. Managing Projects: A Team-Based Approach offers the academic rigor found in most textbooks along with the practical attributes often foun...

  20. LHCb online infrastructure monitoring tools

    International Nuclear Information System (INIS)

    Granado Cardoso, L.; Gaspar, C.; Haen, C.; Neufeld, N.; Varela, F.; Galli, D.

    2012-01-01

    The Online System of the LHCb experiment at CERN is composed of a very large number of PCs: around 1500 in a CPU farm for performing the High Level Trigger; around 170 for the control system, running the SCADA system - PVSS; and several others for performing data monitoring, reconstruction, storage, and infrastructure tasks, like databases, etc. Some PCs run Linux, some run Windows but all of them need to be remotely controlled and monitored to make sure they are correctly running and to be able, for example, to reboot them whenever necessary. A set of tools was developed in order to centrally monitor the status of all PCs and PVSS Projects needed to run the experiment: a Farm Monitoring and Control (FMC) tool, which provides the lower level access to the PCs, and a System Overview Tool (developed within the Joint Controls Project - JCOP), which provides a centralized interface to the FMC tool and adds PVSS project monitoring and control. The implementation of these tools has provided a reliable and efficient way to manage the system, both during normal operations as well as during shutdowns, upgrades or maintenance operations. This paper will present the particular implementation of this tool in the LHCb experiment and the benefits of its usage in a large scale heterogeneous system

  1. Participation of the Republic of Kazakhstan in the projects: outside view

    International Nuclear Information System (INIS)

    Kontzen, Zh.P.

    2001-01-01

    Non-proliferation of mass destruction weapon serves the special condition for creators of International Scientific-Technical Center (ISTC) in Moscow. In this relation the ISTC fulfills their task by means of providing of funds for supporting of the scientists of former Soviet Union were working with nuclear weapon, by turning them to the peaceful activity. As well as this is facilitating to maintenance of relations between scientists. Formulas of cooperation such as attraction of foreign collaborators for fulfilment projects or implementation of plans for real cooperation were sufficient useful in this relation. Republic of Kazakhstan - like other CIS countries - was taking active part in proposals presentation and successfully working out that were ratified. It is stressed the ISTC projects contribution into progressive transmission toward to independence of Kazakhstan Scientific-Technical System as well as technical progress, required for the Republic prosperity in both the industrial and the social (health, environment) aspects

  2. Using Options to Manage Dynamic Uncertainty in Acquisition Projects

    National Research Council Canada - National Science Library

    Ceylan, B. K; Ford, David N

    2002-01-01

    Uncertainty in acquisition projects and environments can degrade performance. Traditional project planning, management tools, and methods can effectively deal with uncertainties in relatively stable environments...

  3. A modular projection autostereoscopic system for stereo cinema

    Science.gov (United States)

    Elkhov, Victor A.; Kondratiev, Nikolai V.; Ovechkis, Yuri N.; Pautova, Larisa V.

    2009-02-01

    The lenticular raster system for 3D movies non-glasses show designed by NIKFI demonstrated commercially in Moscow in the 40'st of the last century. Essential lack of this method was narrow individual viewing zone as only two images on the film used. To solve this problem, we propose to use digital video projective system with modular principle of its design. Increase of the general number of the pixels forming the stereo image is reached by using of more than one projector. The modular projection autostereoscopic system for demonstration of the 3D movies includes diffuser screen; lenticular plate located in front of the screen; projective system consisted from several projectors and the block of parallax panoramogram fragments creator. By means of this block the parallax panoramogram is broken into fragments which quantity corresponds to number of projectors. For the large dimension lenticular screen making rectangular fragments of inclined raster were joined in a uniform leaf. To obtain the needed focal distance of the screen lenses we used immersion - aqueous solution of glycerin. The immersion also let essentially decrease visibility of fragments joints. An experimental prototype of the modular projection autostereoscopic system was created to validate proposed system.

  4. Spray-formed tooling

    Science.gov (United States)

    McHugh, K. M.; Key, J. F.

    The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be designed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

  5. Why does project planning fail

    International Nuclear Information System (INIS)

    Foley, M.; Luciano, G.

    1991-01-01

    The technology of project controls have become increasingly sophisticated. Some say that the technological advancements of the Nineteen-Eighties represented a maturation of project control tools. Others say that the advancements were merely bells and whistles that added little or nothing to the project management process. Above it all, as we enter the Nineties, there is a popular outcry to get back to the basics of planning. The genesis of this outcry is the sobering impact of significant cost overruns and schedule extensions, even on projects that have employed the most advanced project control tools and systems. This paper examines the merits of taking a strategic approach to the project planning process. Within that context, there are basic goals of planning which are enduring through the life cycle of the project. Key reasons for failure and inability to achieve the goals of project planning are explained. By examining the goals of project planning and the reasons for failure, insight is provided into the role of project controls specialists and sophisticated project control tools in meeting the challenges of complex project management in the 1990's

  6. Jerry Pinkney: Creator of Magic through Watercolors.

    Science.gov (United States)

    Brodie, Carolyn S.

    1998-01-01

    Provides background information on award-winning illustrator of children's books, Jerry Pinkney, recipient of three Caldecott Honor Medals and lists sources of biographical information. Suggests learning activities and includes an annotated bibliography of selected books illustrated by Jerry Pinkney. (AEF)

  7. Creators of mathematical and computational sciences

    CERN Document Server

    Agarwal, Ravi P

    2014-01-01

    The book records the essential discoveries of mathematical and computational scientists in chronological order, following the birth of ideas on the basis of prior ideas ad infinitum. The authors document the winding path of mathematical scholarship throughout history, and most importantly, the thought process of each individual that resulted in the mastery of their subject. The book implicitly addresses the nature and character of every scientist as one tries to understand their visible actions in both adverse and congenial environments. The authors hope that this will enable the reader to understand their mode of thinking, and perhaps even to emulate their virtues in life. … presents a picture of mathematics as a creation of the human imagination. … brings the history of mathematics to life by describing the contributions of the world’s greatest mathematicians. —Rex F. Gandy, Provost and Vice President for Academic Affairs, TAMUK   It starts with the explanation and history of numbers, arithmetic, ...

  8. Mihail Jora, creator of Romanian ballet prototype

    Directory of Open Access Journals (Sweden)

    Lava BRATU

    2011-01-01

    Full Text Available The idea to use in the ballet performances topics related to the Romanian music and life came through Mihail Jora’s creations: „La piaţă” (1928, „Demoazela Măriuţa” (1940, „Curtea Veche” (1948, „Când strugurii se coc” (1953, „Întoarcerea din adâncuri” (1959, „Hanul Dulcineea” (1966. His works are characterized by creative force, subtlety and staging gift that have turned the trivial into art. The dramatic sense, the picturesque force, the complex rhythm, the harmonious coloring, the conducting talent and the gentle use of sounds as well as the modern aesthetic vision - all speak about an artistic personality of an extraordinary originality.

  9. The Wondrous Universe Creation without Creator?

    CERN Document Server

    Börner, Gerhard

    2011-01-01

    The world as it is viewed from modern physics and cosmology has many strange and unexpected features. Often these are in stark contrast with our everyday experience or our preconceptions, such as the concept of space and time as finite and changeable. Nevertheless it is this strange world which is the fundamental basis of our existence. Therefore modern science also has a few things to say about the age-old questions: Who are we? – Where do we come from? – Where are we going? The author, an experienced scientist and teacher, presents the knowledge that we have about our world for non-experts. He takes us on a journey through cosmology and the quantum world of elementary particles. And he sketches the impact of the insights gained into philosophical assumptions and religious beliefs in these disciplines. In the end he asks the speculative question whether there is something beyond the limits of the natural sciences. Gerhard Börner is a Professor of Physics at the Ludwig Maximilians University in Munich a...

  10. GOYA LOPES - Journey of a Creator

    Directory of Open Access Journals (Sweden)

    Maria Auxiliadora dos Santos Goya Lopes

    2016-06-01

    Full Text Available This article presents the launching of a fashion and decoration trend linked to the African and/or Afro-Brazilian world. It was created with the purpose of meeting the market demands that envisioned a brand with this cultural identity. It is a biographical text illustrated with photos and drawings from the author's artistic production. The article is developed in three parts: the author’s motivation since her childhood when she discovered she had a distinctive way of drawing; her training as a plastic artist and designer; and her entrepreneurship strategy to successfully develop and market a fabric stamping pattern with its own personality.The contribution of this AfroBrazilian pioneering design work paved the way for the examination of a new style that has not yet been sufficiently explored in the fashion world. The article reflects on the experience of Goya Lopes as an artist, designer and businesswoman, portraying her career and training, and also how the motivation throughout her life contributed to the creation of this authored work.

  11. Work for Hire for Nonacademic Creators.

    Science.gov (United States)

    Herrington, TyAnna K.

    1999-01-01

    Examines the Work for Hire Doctrine and its importance to technical communication instructors who prepare students to create intellectual products in workplace settings. Explains how the Doctrine operates in practice, charts the progressive legal treatment of work for hire through case law, and notes the developing trend in the courts to support a…

  12. Microsoft Project 2010 The Missing Manual

    CERN Document Server

    Biafore, Bonnie

    2010-01-01

    Microsoft Project is brimming with features to help you manage any project, large or small. But learning the software is only half the battle. What you really need is real-world guidance: how to prep your project before touching your PC, which Project tools work best, and which ones to use with care. This book explains it all, helping you go from project manager to project master. Get a project management primer. Discover what it takes to handle a project successfullyLearn the program inside out. Get step-by-step instructions for Project Standard and Project ProfessionalBuild and refine your

  13. 3D CAD ON Qinshan CANDU project

    International Nuclear Information System (INIS)

    Goland, D.

    2000-01-01

    This paper briefly describe AECL's work in applying computer-aided engineering tools to the Qinshan CANDU project. The main thrust of this paper is to introduce the major CAD software tools and their use in civil design, process design and EI and C design. Other special software tools and non-CAD tools and their applications are also briefly introduced. (author)

  14. Stochastic airspace simulation tool development

    Science.gov (United States)

    2009-10-01

    Modeling and simulation is often used to study : the physical world when observation may not be : practical. The overall goal of a recent and ongoing : simulation tool project has been to provide a : documented, lifecycle-managed, multi-processor : c...

  15. Python tools for Visual Studio

    CERN Document Server

    Wang, Cathy

    2014-01-01

    This is a hands-on guide that provides exemplary coverage of all the features and concepts related to PTVS.The book is intended for developers who are aiming to enhance their productivity in Python projects with automation tools that Visual Studio provides for the .Net community. Some basic knowledge of Python programming is essential.

  16. ICT tools in collaborative engineering

    NARCIS (Netherlands)

    Ir. Peter van Kollenburg; Dr.Ir. Hay Geraedts

    2001-01-01

    In the fall of 1999, we started, the Integrated Product Development- Collaborative Engineering ( IPD-CE) project as a first pilot. We experimented with modern communication technology in order to find useful tools for facilitating the cooperative work and the contacts of all the participants. Teams

  17. Improved guide tube bulge tool

    International Nuclear Information System (INIS)

    Vaill, R.E.; Phillips, W.D.

    1979-01-01

    A guide tube bulge tool for securing control rod guide tubes to a fuel assembly grid, includes a cylinder having several flexible tines each of which is equipped with a semispherical radially outwardly extending projection. A tapered ram fits into the cylinder so as to force the tines outwardly when the ram is pulled into the cylinder while supporting the other tines. (UK)

  18. Tools for building virtual laboratories

    International Nuclear Information System (INIS)

    Agarwal, Debora; Johnston, William E.; Loken, Stewart; Tierney, Brian

    1996-01-01

    There is increasing interest in making unique research facilities facilities accessible on the Internet. Computer systems, scientific databases and experimental apparatus can be used by international collaborations of scientists using high-speed networks and advanced software tools to support collaboration. We are building tools including video conferencing and electronic white boards that are being used to create examples of virtual laboratories. This paper describes two pilot projects which provide testbeds for the tools. The first is a virtual laboratory project providing remote access to LBNL's Advanced Light Source. The second is the Multidimensional Applications and Gigabit internet work Consortium (MAGIC) testbed which has been established to develop a very high-speed, wide-are network to deliver realtime data at gigabit-per-second rates. (author)

  19. The Engineering Project as Story and Narrative

    DEFF Research Database (Denmark)

    Henriksen, Lars Bo

    2012-01-01

    that the traditional project management tools are not always sufficient when it comes to managing engineering projects. In this chapter, an engineering project is examined, and it turns out that the language, the stories, and the narratives connected to the project is of greater importance to the engineers than...... the formal project management tools that were offered to the engineers. It also turns out that the term “project” could itself be a problem when it comes to fulfilling the project goals. Therefore, it is concluded that when working on engineering projects, language, stories, and narratives are just...

  20. PROJECT MANAGEMENT CONSIDERED IN A 2014 PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    GRAPĂ ADELINA-ROXANA

    2014-05-01

    Full Text Available Project Management has come of age, yet multiple surveys and reports confirm the fact that the majority of projects are challenged. Given the more demanding and strict financial constraints associated with the current fiscal climate, project management is regarded as a tool that can deliver more with less. The literature on Project Management shows that, in spite of advancement in Project Management processes, tools and systems, project success has not significantly improved. This problem raises questions about the value and effectiveness of Project Management and Project Management systems. Programs and projects are considered as strategic assets for the majority of businesses, therefore, the trend of these organizations is to embrace a management by projects culture. The main objective of Project Management nowadays is to ensure programs and projects aligned to a certain strategy and also to provide for every member of an organization the ability to take proactive actions creating additional benefits.