WorldWideScience

Sample records for project approval form

  1. Review by a local medical research ethics committee of the conduct of approved research projects, by examination of patients' case notes, consent forms, and research records and by interview.

    OpenAIRE

    Smith, T.; Moore, E. J.; Tunstall-Pedoe, H.

    1997-01-01

    OBJECTIVE: To monitor the conduct of medical research projects that have already been approved by the local medical research ethics committee. DESIGN: Follow up study of ethically approved studies (randomly selected from all the studies approved in the previous year) by examination of patients' case notes, consent forms, and research records and by interview of the researchers at their workplace. SETTING: Tayside, Scotland (mixed rural and urban population). SUBJECTS: 30 research projects app...

  2. MNR Approvals for waterpower projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    On May 5, 2011, the Ontario Waterpower Association hosted the emergent hydro workshop in Peterborough. In the course of the workshop, the Ministry of Natural Resources (MNR) presented the different requirements for approval of waterpower projects. Various legislation administered by MNR applies to waterpower projects: the Public Lands Act, the Lakes and Rivers Improvement Act, the Endangered Species Act, 2007, and other legislation. The Public Lands Act provides policy and procedure for water power site release; the Lakes and Rivers Improvement Act was designed to manage, protect and preserve waters, land, fish, wildlife and other natural resources; the Endangered Species Act, 2007, is intended to protect species from extinction by protecting their habitats and promoting their recovery. MNR also administer other legislation, including the Aggregate Resources Act and the Forest Fires Prevention Act. This presentation provided an overview of the various pieces of legislation regulating waterpower projects which are administered by MNR.

  3. Review by a local medical research ethics committee of the conduct of approved research projects, by examination of patients' case notes, consent forms, and research records and by interview.

    Science.gov (United States)

    Smith, T; Moore, E J; Tunstall-Pedoe, H

    1997-05-31

    To monitor the conduct of medical research projects that have already been approved by the local medical research ethics committee. Follow up study of ethically approved studies (randomly selected from all the studies approved in the previous year) by examination of patients' case notes, consent forms, and research records and by interview of the researchers at their workplace. Tayside, Scotland (mixed rural and urban population). 30 research projects approved by Tayside local medical research ethics committee. Adherence to the agreed protocol, particularly for recruitment (obtaining and recording informed consent) and for specific requirements of the ethics committee, including notification of changes to the protocol and of adverse events. In one project only oral consent had been obtained, and in a quarter of the studies one or more consent forms were incorrectly completed. Inadequate filing of case notes in five studies and of consent forms in six made them unavailable for scrutiny. Adverse events were reported, but there was a general failure to report the abandoning or non-starting of projects in two studies the investigators failed to notify a change in the responsible researcher. Monitoring of medical research by local medical research ethics committees promotes and preserves ethical standards, protects subjects and researchers, discourages fraud, and has the support of investigators. We recommend that 10% of projects should undergo on-site review, with all others monitored by questionnaire. This would require about six person hours of time and a salary bill of 120 pounds per study monitored.

  4. Radiation requirements for uranium project approvals

    International Nuclear Information System (INIS)

    Hondros, J.

    2014-01-01

    Uranium mining projects in Australia must receive approval under both state and national laws based on a wide ranging impact assessment of the project. The process may take a number of years and involves multiple levels and parts of government and public consultation and scrutiny. The impact assessment is broad and usually covers; environmental, social, health, public safety and economic aspects. Information provided in the approvals documentation needs to be presented in a credible and understandable manner for all audiences. This means making complex information simpler, while making sure that it maintains its technical integrity. Poorly communicated information, which is overly complex, overly simplified or incomplete, can result in significant delays to the project approval which can potentially impact on project timelines. For uranium projects, along with other projects involving radioactive materials, such as minerals sands and rare earths, radiation and its impacts usually draw a disproportionate amount of both government and public scrutiny compared to other potential impacts and risks. It is therefore of key importance that radiation assessments are properly performed and results clearly presented and communicated with sufficient detail for stakeholders to make informed decisions. It is also important to ensure that the radiation risk is presented in perspective with other risks of the project. This presentation outlines a structure for a radiation impact assessment based on experience from a number of projects in Australia. The structure aims to be clear and simple and ensure the right balance between scientific fact, digestible information and demonstrable competence. (author)

  5. 78 FR 2315 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2013-01-10

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule..., receiving approval for the consumptive use of water pursuant to the Commission's approval by rule process...

  6. 78 FR 15402 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2013-03-11

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule..., receiving approval for the consumptive use of water pursuant to the Commission's approval by rule process...

  7. 78 FR 11947 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2013-02-20

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule..., receiving approval for the consumptive use of water pursuant to the Commission's approval by rule process...

  8. 78 FR 17281 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2013-03-20

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule..., receiving approval for the consumptive use of water pursuant to the Commission's approval by rule process...

  9. 77 FR 16317 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2012-03-20

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule..., receiving approval for the consumptive use of water pursuant to the Commission's approval by rule process...

  10. 77 FR 66909 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2012-11-07

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule... below, receiving approval for the consumptive use of water pursuant to the Commission's approval by rule...

  11. 77 FR 21143 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2012-04-09

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule..., receiving approval for the consumptive use of water pursuant to the Commission's approval by rule process...

  12. 77 FR 25010 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2012-04-26

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule... below, receiving approval for the consumptive use of water pursuant to the Commission's approval by rule...

  13. 77 FR 34455 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2012-06-11

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule..., receiving approval for the consumptive use of water pursuant to the Commission's approval by rule process...

  14. 77 FR 55891 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2012-09-11

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule..., receiving approval for the consumptive use of water pursuant to the Commission's approval by rule process...

  15. 77 FR 55892 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2012-09-11

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule..., receiving approval for the consumptive use of water pursuant to the Commission's approval by rule process...

  16. 77 FR 59239 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2012-09-26

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule..., receiving approval for the consumptive use of water pursuant to the Commission's approval by rule process...

  17. 76 FR 66117 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2011-10-25

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule... notice lists the projects, described below, receiving approval for the consumptive use of water pursuant...

  18. 76 FR 53526 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2011-08-26

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule... lists the projects, described below, receiving approval for the consumptive use of water pursuant to the...

  19. 76 FR 42159 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2011-07-18

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule... lists the projects, described below, receiving approval for the consumptive use of water pursuant to the...

  20. 77 FR 4859 - Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2012-01-31

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects approved by rule... notice lists the projects, described below, receiving approval for the consumptive use of water pursuant...

  1. ELECTRONIC COMPLIANCE AND APPROVAL PROJECT (ECAP)

    Energy Technology Data Exchange (ETDEWEB)

    Hope Morgan; Richard A. Varela; Deborah LaHood; Susan Cisco; Mary Ann Benavides; Donna Burks

    2002-11-01

    The Texas Railroad Commission (RRC), working in partnership with the United States Department of Energy and the oil and gas industry it regulates, is implementing a strategy for improving efficiency in regulations and significantly reducing administrative operating costs through the Electronic Compliance and Approval Process (ECAP). The project will streamline regulatory compliance and reporting by providing the ability to electronically submit, process, and query oil and gas applications and reports through the Internet-based ECAP system. Implementation of an ECAP drilling permit pilot project began September 1999 after funding resources were secured--a $700,000 grant from the U.S. Department of Energy and an appropriation of $1.4 million from the Texas Legislature. The pilot project involves creating the ability to file, review, and approve a well's drilling permit application through a completely electronic process. The pilot project solution will ultimately provide the infrastructure, technology, and electronic modules to enable the filing of all compliance permits and performance reports through the internet from a desktop computer. The pilot project was conducted in three phases. The first phase, implemented May 2000, provided the infrastructure that allows the electronic filing and approval of simple drilling permit applications, associated fees, and attachments. The official ''roll-out'' of ECAP and the first electronically filed drilling permit application occurred on May 11, 2000 in Dallas in conjunction with an Internet Workshop sponsored by the Petroleum Technology Transfer Council. After the completion of Phase I, the ECAP team conducted an extensive review of progress to date and analyzed requirements and opportunities for future steps. The technical team identified core infrastructure modifications that would facilitate and better support future development and expansion of the ECAP system and work began on database structure

  2. 75 FR 36301 - Review and Approval of Projects

    Science.gov (United States)

    2010-06-25

    ... SUSQUEHANNA RIVER BASIN COMMISSION 18 CFR Parts 806 and 808 Review and Approval of Projects AGENCY... document contains proposed rules that would amend the project review regulations of the Susquehanna River... the scope of withdrawals requiring review and approval; improve notice procedures for all project...

  3. 44 CFR 78.10 - Project grant approval process.

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF HOMELAND SECURITY INSURANCE AND HAZARD MITIGATION National Flood Insurance Program FLOOD MITIGATION ASSISTANCE § 78.10 Project grant approval process. The State POC will solicit applications from...

  4. 77 FR 75915 - Review and Approval of Projects

    Science.gov (United States)

    2012-12-26

    ... SUSQUEHANNA RIVER BASIN COMMISSION 18 CFR Part 806 Review and Approval of Projects AGENCY... document contains proposed rules that would amend the project review regulations of the Susquehanna River... set forth in this proposed rulemaking is to make further modifications to the Commission's project...

  5. Project W-314 phase I environmental permits and approvals plan

    International Nuclear Information System (INIS)

    TOLLEFSON, K.S.

    1999-01-01

    This document describes the range of environmental actions, including required permits and other agency approvals, for Project W-314 activities in the Hanford Site's Tank Waste Remediation System. This document outlines alternative approaches to satisfying applicable environmental standards, and describes selected strategies for acquiring permits and other approvals needed for waste feed delivery to proceed. This document also includes estimated costs and schedule to obtain the required permits and approvals based on the selected strategy. It also provides estimated costs for environmental support during design and construction based on the preliminary project schedule provided

  6. Spin-forming Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Switzner, Nathan; Henry, Dick

    2009-03-20

    In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

  7. 76 FR 60774 - Review and Approval of Projects

    Science.gov (United States)

    2011-09-30

    ... SUSQUEHANNA RIVER BASIN COMMISSION 18 CFR Part 806 Review and Approval of Projects AGENCY: Susquehanna River Basin Commission. ACTION: Notice of proposed rulemaking; reopening of comment period. SUMMARY: The purpose of this document is to inform the public of an extension of the comment period for...

  8. 77 FR 14272 - Review and Approval of Projects

    Science.gov (United States)

    2012-03-09

    ... SUSQUEHANNA RIVER BASIN COMMISSION 18 CFR Part 806 Review and Approval of Projects CFR Correction In Title 18 of the Code of Federal Regulations, Part 400 to End, revised as of April 1, 2011, on page 118, in Sec. 806.6, (b)(1)(i) and (ii) are removed. [FR Doc. 2012-5837 Filed 3-8-12; 8:45 am] BILLING...

  9. Application for approval of the Cold Lake Expansion Project

    International Nuclear Information System (INIS)

    1997-02-01

    Imperial Oil Resources Limited applied to the Alberta Energy and Utilities Board for approval to expand its operations at Cold Lake, Alberta and to construct and operate an electrical power plant and electrical generator substation. Imperial Oil also applied to the Alberta Environmental Protection Branch to prepare the site for a new central plant for the expansion. The company also requested a short-term groundwater withdrawal permit to provide temporary water supply for start-up. Imperial Oil claims that the project is in the public interests given the project's social, environmental and economic effects. Imperial Oil submitted this 4 volume document in support of their application. The documentation includes a project description, an environmental impact assessment, a biophysical and resource use assessment, a socio-economic assessment, and environmental baseline studies. The project is scheduled for start-up in late 1999 at a total cost of at least $440 million. refs., tabs., figs

  10. Make Projects Small Form Factor PCs

    CERN Document Server

    Wessels, Duane

    2006-01-01

    Shoebox sized and smaller, small-form-factor PCs can pack as much computing muscle as a full-sized desktop computer. They consumer less power, have few or no moving parts, and are very quiet. Whether you plan to use one as a standalone PC or want to embed it in your next hacking project, a small-form-factor PC can be a lot of fun to build. Make Projects: Small Form Factor PCs is the only book available that shows you how to build small-form-factor PCs -- from kits and from scratch -- that are more interesting and more personalized than what a full-sized PC can give you. Included in the book

  11. 75 FR 71177 - Notice of Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2010-11-22

    ... SUSQUEHANNA RIVER BASIN COMMISSION Notice of Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice of approved projects. SUMMARY: This notice... for the consumptive use of water pursuant to the Commission's approval by rule process set forth in 18...

  12. 75 FR 23837 - Notice of Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2010-05-04

    ... SUSQUEHANNA RIVER BASIN COMMISSION Notice of Projects Approved for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice of approved projects. SUMMARY: This notice... consumptive use of water pursuant to the Commission's approval by rule process set forth in 18 CFR 806.22(e...

  13. 20 CFR 703.111 - Submission of new forms of policies for approval; other endorsements.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Submission of new forms of policies for... INSURANCE REGULATIONS Authorization of Insurance Carriers § 703.111 Submission of new forms of policies for approval; other endorsements. No new forms of policies or modification of existing forms of policies shall...

  14. Primary hafnium metal sponge and other forms, approved standard 1973

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    A specification is presented covering virgin hafnium metal commonly designated as sponge because of its porous, sponge-like texture; it may also be in other forms such as chunklets. The specification does not cover crystal bar

  15. Project W-521, waste feed delivery systems environmental permits and approvals plan

    International Nuclear Information System (INIS)

    TOLLEFSON, K.S.

    1999-01-01

    This document has been prepared to define the specific environmental requirements applicable to Project W-521. The document describes the permits and approvals necessary for the project to design, construct, and install planned upgrades, and provides a schedule of activities and provides cost estimates to complete the required permitting and approval activities

  16. 76 FR 20802 - Projects Approved or Rescinded for Consumptive Uses of Water

    Science.gov (United States)

    2011-04-13

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved or Rescinded for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects... the consumptive use of water pursuant to the Commission's approval by rule process set forth in 18 CFR...

  17. 76 FR 50536 - Projects Approved or Rescinded for Consumptive Uses of Water

    Science.gov (United States)

    2011-08-15

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Approved or Rescinded for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the projects... the consumptive use of water pursuant to the Commission's approval by rule process set forth in 18 CFR...

  18. 23 CFR 661.31 - Do IRRBP projects have to be listed on an approved IRR TIP?

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Do IRRBP projects have to be listed on an approved IRR... ENGINEERING AND TRAFFIC OPERATIONS INDIAN RESERVATION ROAD BRIDGE PROGRAM § 661.31 Do IRRBP projects have to be listed on an approved IRR TIP? Yes. All IRRBP projects must be listed on an approved IRR TIP. The...

  19. 76 FR 33019 - Notice of Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2011-06-07

    ... SUSQUEHANNA RIVER BASIN COMMISSION Notice of Projects Approved for Consumptive Uses of Water... consumptive use of water pursuant to the Commission's approval by rule process set forth in 18 CFR 806.22(e... Wilson Drilling Pad 1, ABR-201103014, Lemon Township, Wyoming County, Pa.; Consumptive Use of up to 2.000...

  20. 76 FR 41154 - Review and Approval of Projects

    Science.gov (United States)

    2011-07-13

    ..., production fluids, tophole water, and unconventional natural gas development. In order to encourage the reuse... techniques. The ``gallon one'' regulatory threshold currently applicable under the regulations to gas well... rulemaking; provide for administrative approval of interbasin transfers of flowback and production fluids...

  1. Quality assurance in production and use of special form radioactive material - focal points in BAM approvals

    International Nuclear Information System (INIS)

    Rolle, A.; Buhlemann, L.

    2004-01-01

    BAM as the competent authority for approval of special form radioactive material attaches great importance to a detailed audit of the required quality assurance programs for design, manufacture, testing, documentation, use, maintenance and inspection. Applicants have to submit, together with application documentation information on general arrangements for quality assurance, as well as on quality assurance in production and in operation. Fields where BAM has often found deficiencies are leak test methods, weld seam quality and the safety level after use

  2. 18 CFR 806.4 - Projects requiring review and approval.

    Science.gov (United States)

    2010-04-01

    ... result of a change of the name, identity, internal corporate structure or place of organization and does... period, and undergoing a change of ownership, unless such project satisfies the requirements of..., and undergoing a change of ownership, unless such project satisfies the requirements of paragraphs (b...

  3. 42 CFR 403.308 - State systems under demonstration projects-mandatory approval.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false State systems under demonstration projects..., DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS SPECIAL PROGRAMS AND PROJECTS Recognition of State... approval of a State system are met under § 403.304 (b)(1)-(10) and § 403.304(c), and, if appropriate § 403...

  4. Safety regulation for the design approval of special form radioactive sources

    International Nuclear Information System (INIS)

    Cho, Woon-Kap

    2009-01-01

    Several kinds of special form radioactive sources for industrial, medical applications are being produced in Korea. Special form radioactive sources should meet strict safety requirements specified in the domestic safety regulations and the design of the sources should be certified by the regulatory authority, the Ministry of Education, Science and Technology (MEST). Several safety tests such as impact, percussion, heating, and leak tests are performed on the sources according to the domestic regulations and the international safety standards such as ANSI N542-1977 and ISO 2919-1999(E). As a regulatory expert body, Korea Institute of Nuclear Safety (KINS) assesses various types of application documents, such as safety analysis report, quality assurance program, and other documents evidencing fulfillment of requirements for design approval of the special form radioactive sources, submitted by a legal person who intends to produce special form radioactive sources and then reports the assessment result to MEST. A design approval certificate is issued to the applicant by MEST on the basis of a technical evaluation report presented by KINS.

  5. A European Seal of Approval for 'gay' businesses: findings from an HIV-prevention pilot project.

    Science.gov (United States)

    Sherriff, Nigel; Gugglberger, Lisa

    2014-05-01

    'Gay' businesses can be important settings through which to deliver health promotion interventions to vulnerable populations, such as men who have sex with men (MSM) regarding HIV prevention. This article draws on data from the European Everywhere project, which represents the first scheme to develop and pre-test a common framework for HIV/STI prevention in 'gay' businesses across eight European countries. The scientific basis of the Everywhere framework was developed using a comprehensive consensus-building process over 30 months. This process included: formative scoping research; interviews with 54 'gay' businesses; meetings/workshops with representatives from project partners, 'gay' businesses, public health administrations and external experts; 15 interviews and three focus groups with project partners; a five-month pilot action phase in eight countries, together with support from the project's Advisory Group; and all Everywhere project partners including the Scientific Steering Committee. A voluntary European code setting out differentiated HIV/STI-prevention standards for 'gay' businesses (including sex venues, 'gay' and 'gay' friendly social spaces, travel agencies, hotels, dating websites) was developed and piloted in eight European cities. During a five-month pilot action, 83 'gay' businesses were certified with the Everywhere Seal of Approval representing a considerable increase on the expected pilot target of 30. Everywhere offers a major contribution to the public health and/or health promotion field in the form of a practical, policy-relevant, settings-based HIV-prevention framework for 'gay' businesses that is common across eight European countries. Findings suggest that a European-wide model of prevention is acceptable and feasible to businesses.

  6. 7 CFR 1486.302 - Can changes be made to a project once it has been approved?

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Can changes be made to a project once it has been... MARKETS PROGRAM Program Operations § 1486.302 Can changes be made to a project once it has been approved? (a) Approved projects may be modified if circumstances change in such a way that they would likely...

  7. Sixth-Form Projects in Biology: A Case History.

    Science.gov (United States)

    Robinson, P. M.; Parker, R. E.

    1981-01-01

    Some of the problems encountered in devising sixth-form projects are discussed and a detailed account given of one project in which a study was made of the effect of onion bulb volatiles on the germination of lettuce seed. (Author)

  8. Ross In Situ Uranium Recovery Project NESHAP Subpart W Construction Approval

    Science.gov (United States)

    On May 5, 2015, EPA issued a Construction Approval under the National Emission Standards for Hazardous Air Pollutants (NESHAPs) at 40 CFR Part 61, subpart W, to Strata Energy, Inc., for their Ross In Situ Recovery (ISR) Uranium Project in Crook County, WY.

  9. A planning support system to optimize approval of private housing development projects

    Science.gov (United States)

    Hussnain, M. Q.; Wakil, K.; Waheed, A.; Tahir, A.

    2016-06-01

    Out of 182 million population of Pakistan, 38% reside in urban areas having an average growth rate of 1.6%, raising the urban housing demand significantly. Poor state response to fulfil the housing needs has resulted in a mushroom growth of private housing schemes (PHS) over the years. Consequently, only in five major cities of Punjab, there are 383 legal and 150 illegal private housing development projects against 120 public sector housing schemes. A major factor behind the cancerous growth of unapproved PHS is the prolonged and delayed approval process in concerned approval authorities requiring 13 months on average. Currently, manual and paper-based approaches are used for vetting and for granting the permission which is highly subjective and non-transparent. This study aims to design a flexible planning support system (PSS) to optimize the vetting process of PHS projects under any development authority in Pakistan by reducing time and cost required for site and documents investigations. Relying on the review of regulatory documents and interviews with professional planners and land developers, this study describes the structure of a PSS developed using open- source geo-spatial tools such as OpenGeo Suite, PHP, and PostgreSQL. It highlights the development of a Knowledge Module (based on regulatory documents) containing equations related to scheme type, size (area), location, access road, components of layout plan, planning standards and other related approval checks. Furthermore, it presents the architecture of the database module and system data requirements categorized as base datasets (built-in part of PSS) and input datasets (related to the housing project under approval). It is practically demonstrated that developing a customized PSS to optimize PHS approval process in Pakistan is achievable with geospatial technology. With the provision of such a system, the approval process for private housing schemes not only becomes quicker and user-friendly but also

  10. DEVELOPMENT OF THE STATE SUPPORT FORMS PROJECTS IN INDUSTRIAL BUILDING

    Directory of Open Access Journals (Sweden)

    I. M. Meilanov

    2016-01-01

    Full Text Available Aim. The topicality of the research is stipulated by the objective necessity of the organizational and economic mechanism improvement of the state support projects of the industrial building. The aim of the research is the development of conceptual provisions and methodological foundations of financial projects creating conditions for economic growth of Russia based on the construction and putting into effect industrial objects.Methods. In the course of the research the system, subject-functional and structural approaches were implemented to solve the problems set widening the scope of the complex approach to assessment of the current operating mechanism of the state financial support of the projects and financial volume; to criteria stipulation of the most effective projects contest selection: to the search of the investment resources accumulation instrument into industrial building.Results. It is stipulated that state investment policy in industrial building mechanism oriented to define rational investment volumes and their branch, reproductive, technological and territorial structure; option of the building branch development priority; increase of the investment projects efficiency realization. The dynamics of the state support in the form of subsidies and budget investments into creation of the industrial building objects is analytically summarized. It is determined that the peculiarity of the modern state support projects of industrial building is transition from budget allocations distribution between branches and regions to selective and partial financing of specific investment projects on competitive basis. Some tactics of state and private partnership attracting private capital without losing strategic state control under systems and objects are defined. As an effective form of the industrial building support projects it is proposed to use a concession model form: projecting - building- financing- ownership - exploitation

  11. Hanford Waste Vitrification Plant Project Waste Form Qualification Program Plan

    International Nuclear Information System (INIS)

    Randklev, E.H.

    1993-06-01

    The US Department of Energy has created a waste acceptance process to help guide the overall program for the disposal of high-level nuclear waste in a federal repository. This Waste Form Qualification Program Plan describes the hierarchy of strategies used by the Hanford Waste Vitrification Plant Project to satisfy the waste form qualification obligations of that waste acceptance process. A description of the functional relationship of the participants contributing to completing this objective is provided. The major activities, products, providers, and associated scheduling for implementing the strategies also are presented

  12. Form factors in the projected linear chiral sigma model

    International Nuclear Information System (INIS)

    Alberto, P.; Coimbra Univ.; Bochum Univ.; Ruiz Arriola, E.; Fiolhais, M.; Urbano, J.N.; Coimbra Univ.; Goeke, K.; Gruemmer, F.; Bochum Univ.

    1990-01-01

    Several nucleon form factors are computed within the framework of the linear chiral soliton model. To this end variational means and projection techniques applied to generalized hedgehog quark-boson Fock states are used. In this procedure the Goldberger-Treiman relation and a virial theorem for the pion-nucleon form factor are well fulfilled demonstrating the consistency of the treatment. Both proton and neutron charge form factors are correctly reproduced, as well as the proton magnetic one. The shapes of the neutron magnetic and of the axial form factors are good but their absolute values at the origin are too large. The slopes of all the form factors at zero momentum transfer are in good agreement with the experimental data. The pion-nucleon form factor exhibits to great extent a monopole shape with a cut-off mass of Λ=690 MeV. Electromagnetic form factors for the vertex γNΔ and the nucleon spin distribution are also evaluated and discussed. (orig.)

  13. Securing classification and regulatory approval for deepwater projects: management challenges in a global environment

    Energy Technology Data Exchange (ETDEWEB)

    Feijo, Luiz P.; Burton, Gareth C. [American Bureau of Shipping (ABS), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    As the offshore industry continues to develop and move into increasingly deeper waters, technological boundaries are being pushed to new limits. Along with these advances, the design, fabrication and installation of deepwater oil and gas projects has become an increasingly global endeavor. After providing an overview of the history and role of Classification Societies, this paper reviews the challenges of securing classification and regulatory approval in a global environment. Operational, procedural and technological changes which one Classification Society; the American Bureau of Shipping, known as ABS, has implemented to address these challenges are presented. The result of the changes has been a more customized service aiming at faster and more streamlined classification approval process. (author)

  14. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2003 ed

    International Nuclear Information System (INIS)

    2003-10-01

    This is the fourteenth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Transport Safety Standards Committee (TRANSSC). It supersedes IAEA-TECDOC-1302 'Directory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 2002 Edition'. Through the database, the Secretariat collects administrative and technical information provided by the issuing competent authority about package approval certificates. Such data are used mainly by national competent authorities and port and customs officials to assist in regulating radioactive material movements in their country, and also by manufacturers and shippers of radioactive material. The database carries information on extant certificates and those that expired within the last complete calendar year. The PACKTRAM database only contains information that has been provided to the IAEA. The data are not complete nor guaranteed to be accurate. If detailed information is required, the original package approval certificates must be consulted. If information is required about package approval certificates that are not contained in the database, the issuing competent authority must be consulted

  15. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2003 ed

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-10-01

    This is the fourteenth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Transport Safety Standards Committee (TRANSSC). It supersedes IAEA-TECDOC-1302 'Directory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 2002 Edition'. Through the database, the Secretariat collects administrative and technical information provided by the issuing competent authority about package approval certificates. Such data are used mainly by national competent authorities and port and customs officials to assist in regulating radioactive material movements in their country, and also by manufacturers and shippers of radioactive material. The database carries information on extant certificates and those that expired within the last complete calendar year. The PACKTRAM database only contains information that has been provided to the IAEA. The data are not complete nor guaranteed to be accurate. If detailed information is required, the original package approval certificates must be consulted. If information is required about package approval certificates that are not contained in the database, the issuing competent authority must be consulted.

  16. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1992 ed

    International Nuclear Information System (INIS)

    1992-08-01

    Being in a unique position to facilitate information exchange, the Secretariat of the International Atomic Energy Agency was requested by its Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM) to collate package approval data and publish periodical reports thereon. A database was implemented on the mainframe computer in the mid-1980s but this was soon adapted for use on a personal computer. A fully menu-driven system programme was designed that allows both contributing Member States and the Secretariat more flexibility in data processing and reporting. Complete documentation is available in the form of a user guide. The cut-off date used for this report is 31 August 1992. This report supersedes IAEA-TECDOC-617 ''Directory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 1991 Edition''. The information contained in this report is given in six tables. In each of these, information is presented in alphabetical order based on the certificate number. The certificate number is identical with the competent authority identification mark. It is composed of the issuing Member State's international vehicle registration identification (VRI) code, followed by a slash, then a unique number specific to a particular design or shipment that is assigned by the competent authority, another slash and finally a code identifying the type of package involved. ''-85'' is appended to those certificates that were approved on the basis of the 1985 Edition of Safety Series No. 6. Tables 1 to 4 present administrative data including issue and expiry dates, package identification, package serial numbers, modes for which the package/shipment is approved and the edition of Safety Series No. 6 on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table 5. Table 6

  17. Directory of national competent authorities' approval certificates for packages, shipments, special arrangements and special form radioactive material

    International Nuclear Information System (INIS)

    1987-11-01

    The Agency's transport regulations prescribe various requirements for the authorization of packages and shipments in respect of both national and international movement of radioactive material. These authorizations are issued by the relevant competent authority of the country concerned; they take the form of package approval and/or shipment approval certificates. At the request of the Standing Advisory Group of the Safe Transport of Radioactive Material (SAGSTRAM), the Agency has established a programme to maintain a file of those certificates for packages and shipments which are either transported internationally or used outside the country of origin. The purpose of this directory is to facilitate the transfer of information to competent authorities and any other person wishing details on the packaging, authorized contents or special conditions pertinent to any package or shipment. The directory enables competent authorities to be aware of the status of any certificate submitted for validation. It also indicates any change in status of any certificate already validated

  18. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2002 ed

    International Nuclear Information System (INIS)

    2002-08-01

    The current edition of the transport Regulations was published in 1996 and is more commonly referred to as 'ST-1'. Earlier Editions were known as Safety Series No. 6. The latest English reprint (2000) is now identified as TS-R-1 (ST-1, Revised). The transport Regulations elaborate requirements for the design, fabrication and maintenance of packaging as well as those for preparation, consigning, handling, carriage, storage in transit and receipt of the packages at final destination. Approval issued in the form of certificates is required for the design or shipment of packages. This report supersedes IAEA-TECDOC-1237 Directory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 2001 Edition. It is distributed worldwide to the IAEA Member States' competent authorities for transport, and other entities who have requested copies. Electronic copies of the main data file are provided to registered users of the PACKTRAM database. The information contained in this report is given in six tables. In each of these, information is presented in alphabetical order based on the certificate number. Tables 1 to 4 present administrative data including issue and expiry dates, package identification, package serial numbers, modes for which the package/shipment is approved and the edition of the IAEA Transport Safety Regulations on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table 5. Table 6 shows the certificates reported to the Secretariat by each participating Member State

  19. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2001 edition

    International Nuclear Information System (INIS)

    2001-08-01

    The current edition of the transport Regulations was published in 1996 and is more commonly referred to as 'ST-1'. Earlier Editions were known as Safety Series No. 6. The latest English reprint (2000) is now identified as TS-R-1 (ST-1, Revised). The transport Regulations elaborate requirements for the design, fabrication and maintenance of packaging as well as those for preparation, consigning, handling, carriage, storage in transit and receipt of the packages at final destination. Approval issued in the form of certificates is required for the design or shipment of packages. This report supersedes IAEA-TECDOC-1171 D irectory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 2000 Edition . It is distributed worldwide to the IAEA Member States' competent authorities for transport, and other entities who have requested copies. Electronic copies of the main data file are provided to registered users of the PACKTRAM database. The information contained in this report is given in six tables. In each of these, information is presented in alphabetical order based on the certificate number. Tables 1 to 4 present administrative data including issue and expiry dates, package identification, package serial numbers, modes for which the package/shipment is approved and the edition of the IAEA Transport Safety Regulations on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table 5. Table 6 shows the certificates reported to the Secretariat by each participating Member State

  20. Approved CAMU equals faster, better, cheaper remediation at the Fernald Environmental Management Project

    International Nuclear Information System (INIS)

    Dupuis-Nouille, E.M.; Goidell, L.C.; Strimbu, M.J.; Nickel, K.A.

    1996-01-01

    A 1,050 acre Corrective Action Management Unit (CAMU) was approved for the Fernald Protection Agency Environmental Management Project (FEMP) by the US Environmental Protection Agency (USEPA) to manage environmental media remediation waste in the Operable Unit 5 Record of Decision, 1995. Debris is also proposed for management as remediation waste under the CAMU Rule in the Operable Unit 3 Remedial Investigation/Feasibility Study (RI/FS) Report, as of December 1995. Application of the CAMU Rule at the FEMP will allow consolidation of low-level mixed waste and hazardous waste that presents minimal threat from these two operable units in an on-property engineered disposal facility without triggering land disposal restrictions (LDRs). The waste acceptance criteria for the on property disposal facility are based on a combination of site-specific risk-based concentration standards, as opposed to non-site-specific requirements imposed by regulatory classifications

  1. 77 FR 14817 - Agency Information Collection Activities: Form I-829, Extension of a Currently Approved...

    Science.gov (United States)

    2012-03-13

    ...-Day Notice of Information Collection Under Review: Form I- 829, Petition by Entrepreneur to Remove... existing information collection. (2) Title of the Form/Collection: Petition by Entrepreneur to Remove... households. This form is used by a conditional resident alien entrepreneur who obtained such status through a...

  2. 77 FR 33758 - Agency Information Collection Activities: Form I-829, Extension of a Currently Approved...

    Science.gov (United States)

    2012-06-07

    ... ACTION: 60-Day Notice of Information Collection Under Review: Form I- 829, Petition by Entrepreneur to...: Extension of an existing information collection. (2) Title of the Form/Collection: Petition by Entrepreneur...: Individuals and households. This form is used by a conditional resident alien entrepreneur who obtained such...

  3. 75 FR 74070 - Agency Information Collection Activities: Form I-829, Extension of a Currently Approved...

    Science.gov (United States)

    2010-11-30

    ... ACTION: 60-Day notice of information collection under review: Form I- 829, Petition by Entrepreneur to... existing information collection. (2) Title of the Form/Collection: Petition by Entrepreneur to Remove... households. This form is used by a conditional resident alien entrepreneur who obtained such status through a...

  4. FORMING THE ASSESSMENT MECHANISM OF ENTERPRISES’ INNOVATIVE PROJECTS COMPETITIVENESS

    Directory of Open Access Journals (Sweden)

    Ekaterina D. Kuzina

    2013-01-01

    Full Text Available The author proposes a mechanism to estimate the competitiveness of enterprises’ innovative projects. The focus is on the criteria affected the competitiveness of innovative projects. The mechanism of calculating the relative market attractiveness and the relative innovative potential of enterprise to implement innovative project is shown.

  5. 75 FR 31508 - Notice of Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2010-06-03

    ... County, Pa.; Approval Date: April 13, 2010. 23. Chesapeake Appalachia, LLC, Pad ID: Henry, ABR-20100423..., Susquehanna County, Pa.; Approval Date: April 14, 2010. 26. EOG Resources, Inc., Pad ID: JENKINS 1H, ABR...

  6. Order of 25 March 1981 concerning the approval of special form radioactive materials in sealed sources

    International Nuclear Information System (INIS)

    1981-01-01

    This order determines the models of sealed sources which constitute special form radioactive materials within the meaning of the Order of 24 November 1977 concerning the characteristics of such materials. (NEA) [fr

  7. 76 FR 70747 - Agency Information Collection Activities: Form I-526, Extension of a Currently Approved...

    Science.gov (United States)

    2011-11-15

    ... Entrepreneur. The Department of Homeland Security, U.S. Citizenship and Immigration Services (USCIS) will be... Alien Entrepreneur. (3) Agency form number, if any, and the applicable component of the Department of...

  8. 42 CFR 137.365 - What is the procedure for the Secretary's review and approval of project planning and design...

    Science.gov (United States)

    2010-10-01

    ... SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of the...-Governance Tribe? (a) The Secretary shall review and approve planning documents to ensure compliance with... design documents for general compliance with requirements of the construction project agreement. (b) The...

  9. Directory of national competent authorities' approval certificates for packages, shipments, special arrangements and special form radioactive material

    International Nuclear Information System (INIS)

    1986-09-01

    The Agency's transport regulations prescribe various requirements for the authorization of packages and shipments in respect of both national and international movement of radioactive materials. These authorizations are issued by the relevant competent authority of the country concerned; they take the form of package approval and/or shipment approval certificates. At the request of the Standing Advisory Group of the Safe Transport of Radioactive Material (SAGSTRAM), the Agency has established a programme to maintain a file of those certificates for packages and shipments which are either transported internationally or used outside the country of origin. The purpose of this directory is to facilitate the transfer of information to competent authorities and any other person wishing details on the packaging, authorized contents or special conditions pertinent to any package or shipment. The directory enables competent authorities to be aware of the status of any certificate submitted for validation. It also indicates any change in status of any certificate already validated. Future updates of the complete data will be distributed annually in a TECDOC form and, in addition, summary listings of the certificates will be issued every six months thereafter

  10. 7 CFR 54.1018 - Form of official identification and approval for use.

    Science.gov (United States)

    2010-01-01

    ...) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS..., Processing, and Packaging of Livestock and Poultry Products § 54.1018 Form of official identification and...

  11. 76 FR 12751 - Agency Information Collection Activities: Form I-589, Extension of a Currently Approved...

    Science.gov (United States)

    2011-03-08

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... Witholding of Removal; OMB Control No. 1615-0067. The Department of Homeland Security, U.S. Citizenship and... collection: Form I-589. U.S. Citizenship and Immigration Services (USCIS). (4) Affected public who will be...

  12. 76 FR 27078 - Agency Information Collection Activities: Form N-426, Extension of a Currently Approved...

    Science.gov (United States)

    2011-05-10

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... Military or Naval Service; OMB Control No. 1615-0053. The Department of Homeland Security, U.S. Citizenship... sponsoring the collection: Form N-426, U.S. Citizenship and Immigration Services. (4) Affected public who...

  13. 77 FR 36285 - Agency Information Collection Activities: Form I-693, Revision of a Currently Approved...

    Science.gov (United States)

    2012-06-18

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information.... Citizenship and Immigration Services (USCIS) will be submitting the following information collection request... of the Department of Homeland Security sponsoring the collection: Form I-693. U.S. Citizenship and...

  14. 76 FR 53929 - Agency Information Collection Activities: Form G-639, Revision of a Currently Approved...

    Science.gov (United States)

    2011-08-30

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... Act Request. * * * * * The Department of Homeland Security, U.S. Citizenship and Immigration Services... sponsoring the collection: Form G-639; U.S. Citizenship and Immigration Services (USCIS). (4) Affected public...

  15. 75 FR 39271 - Agency Information Collection Activities: Form I-694, Extension of a Currently Approved...

    Science.gov (United States)

    2010-07-08

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... Department of Homeland Security, U.S. Citizenship and Immigration Services (USCIS) will be submitting the... the Department of Homeland Security sponsoring the collection: Form I-694; U.S. Citizenship and...

  16. 75 FR 47822 - Agency Information Collection Activities: Form G-639, Extension of a Currently Approved...

    Science.gov (United States)

    2010-08-09

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... Act Request; OMB Control No. 1615- 0102. The Department of Homeland Security, U.S. Citizenship and... Department of Homeland Security sponsoring the collection: Form G-639; U.S. Citizenship and Immigration...

  17. 75 FR 47824 - Agency Information Collection Activities: Form I-643, Extension of a Currently Approved...

    Science.gov (United States)

    2010-08-09

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... Security, U.S. Citizenship and Immigration Services (USCIS) will be submitting the following information... collection: Form I-643; U.S. Citizenship and Immigration Services (USCIS). (4) Affected public who will be...

  18. 77 FR 31033 - Agency Information Collection Activities: Form I-589, Extension of a Currently Approved...

    Science.gov (United States)

    2012-05-24

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... Withholding of Removal. The Department of Homeland Security, U.S. Citizenship and Immigration Services (USCIS... collection: Form I-589. U.S. Citizenship and Immigration Services (USCIS). (4) Affected public who will be...

  19. 76 FR 63320 - Agency Information Collection Activities: Form N-470, Revision of a Currently Approved...

    Science.gov (United States)

    2011-10-12

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... Residence for Naturalization. The Department of Homeland Security, U.S. Citizenship and Immigration Services... sponsoring the collection: Form N-470, U.S. Citizenship and Immigration Services. (4) Affected public who...

  20. 77 FR 34053 - Agency Information Collection Activities: Form I-590, Extension of a Currently Approved...

    Science.gov (United States)

    2012-06-08

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... Classification as Refugee. The Department of Homeland Security, U.S. Citizenship and Immigration Services (USCIS... Security sponsoring the collection: Form I-590; U.S. Citizenship and Immigration Services (USCIS). (4...

  1. 77 FR 12071 - Agency Information Collection Activities: Form G-28, Revision of a Currently Approved Information...

    Science.gov (United States)

    2012-02-28

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... as Attorney or Accredited Representative. The Department of Homeland Security, U.S. Citizenship and...: Form G-28. U.S. Citizenship and Immigration Services. (4) Affected public who will be asked or required...

  2. 76 FR 58029 - Agency Information Collection Activities: Form N-600K, Extension of a Currently Approved...

    Science.gov (United States)

    2011-09-19

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... ACTION: 30-Day Notice of Information Collection Under Review: Form N- 600K; Application for Citizenship and Issuance of Certificate under Section 322. The Department of Homeland Security, U.S. Citizenship...

  3. 49 CFR 173.476 - Approval of special form Class 7 (radioactive) materials.

    Science.gov (United States)

    2010-10-01

    ... (radioactive) materials must maintain on file for at least one year after the latest shipment, and provide to... evidence based on calculative methods to show that the material is able to pass the tests; or other... shipping papers as “Radioactive Material, Special Form, n.o.s.” [Amdt. 173-244, 60 FR 50307, Sept. 28, 1995...

  4. Nr 702 - Report made on the behalf of the Foreign affairs Commission on the bill project nr 138 authorizing the approval of the social security agreement under the form of an exchange of letters between the Government of the French Republic and the ITER International Fusion Energy Organization in view of the joint implementation of the ITER project, and Appendix: text of the Foreign affairs Commission

    International Nuclear Information System (INIS)

    Ameline, Nicole

    2013-01-01

    This report first presents the ITER scientific project, its history, its objective (to demonstrate the scientific and technological feasibility of fusion energy), and the ITER Organization which has been specifically created for this international project, and comprises as many domestic agencies as member countries. It gives an overview of the present status of the project construction in southern France. The second part addresses the agreement on social security between the ITER organization and France. The international character of this organization indeed presents risks of disadvantages for the French personnel of the organization. The report evokes the measures contained by the agreement to correct this aspect

  5. Zirconium sponge and other forms of virgin metal for nuclear applications - approved standard 1973

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    This specification covers virgin zirconium metal commonly designated as sponge because of its porous, sponge-like texture, but it may also take other forms such as chunklets. One grade is described which is designated as reactor grade R-1, suitable for use in nuclear applications. The most important characteristic of the reactor grade is its low nuclear cross section as achieved by removal of hafnium and careful quality control in manufacturing procedures to prevent contamination with other high cross section materials

  6. 77 FR 58802 - Notice of Intent To Seek OMB Approval To Collect Information: Forms Pertaining to the Peer Review...

    Science.gov (United States)

    2012-09-24

    ... Collect Information: Forms Pertaining to the Peer Review of ARS Research Projects AGENCY: Agricultural... S. Strauss, Peer Review Program Coordinator, Office of Scientific Quality Review; Agricultural... allow the ARS to efficiently manage data associated with the peer review of agricultural research. All...

  7. Ethics review as a component of institutional approval for a multicentre continuous quality improvement project: the investigator's perspective

    Directory of Open Access Journals (Sweden)

    von Dadelszen Peter

    2010-07-01

    Full Text Available Abstract Background For ethical approval of a multicentre study in Canada, investigators must apply separately to individual Research Ethics Boards (REBs. In principle, the protection of human research subjects is of utmost importance. However, in practice, the process of multicentre ethics review can be time consuming and costly, requiring duplication of effort for researchers and REBs. We used our experience with ethical review of The Canadian Perinatal Network (CPN, to gain insight into the Canadian system. Methods The applications forms of 16 different REBs were abstracted for a list of standardized items. The application process across sites was compared. Correspondence between the REB and the investigators was documented in order to construct a timeline to approval, identify the specific issues raised by each board, and describe how they were resolved. Results Each REB had a different application form. Most (n = 9 had a two or three step application process. Overall, it took a median of 31 days (range 2-174 days to receive an initial response from the REB. Approval took a median of 42 days (range 4-443 days. Privacy and consent were the two major issues raised. Several additional minor or administrative issues were raised which delayed approval. Conclusions For CPN, the Canadian REB process of ethical review proved challenging. REBs acted independently and without unified application forms or submission procedures. We call for a critical examination of the ethical, privacy and institutional review processes in Canada, to determine the best way to undertake multicentre review.

  8. A Project Manager's Book of Forms A Companion to the PMBOK Guide

    CERN Document Server

    Stackpole, Cynthia Snyder

    2010-01-01

    This source book of forms and procedures for using them follows exactly the content of the Project Management Body of Knowledge Guide, 4E. It provides a road-map approach so readers know exactly where they are and what forms precede and follow their current position on a project. The volume contains forms in hard copy for reproduction as well as in an accompanying CD for use and customization by a wide variety of project managers, consultants, and other associated professionals.

  9. The GenABEL Project for statistical genomics [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Lennart C. Karssen

    2016-05-01

    Full Text Available Development of free/libre open source software is usually done by a community of people with an interest in the tool. For scientific software, however, this is less often the case. Most scientific software is written by only a few authors, often a student working on a thesis. Once the paper describing the tool has been published, the tool is no longer developed further and is left to its own device. Here we describe the broad, multidisciplinary community we formed around a set of tools for statistical genomics. The GenABEL project for statistical omics actively promotes open interdisciplinary development of statistical methodology and its implementation in efficient and user-friendly software under an open source licence. The software tools developed withing the project collectively make up the GenABEL suite, which currently consists of eleven tools. The open framework of the project actively encourages involvement of the community in all stages, from formulation of methodological ideas to application of software to specific data sets. A web forum is used to channel user questions and discussions, further promoting the use of the GenABEL suite. Developer discussions take place on a dedicated mailing list, and development is further supported by robust development practices including use of public version control, code review and continuous integration. Use of this open science model attracts contributions from users and developers outside the “core team”, facilitating agile statistical omics methodology development and fast dissemination.

  10. 75 FR 62176 - Notice of Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2010-10-07

    ..., Snow Shoe Township, Centre County, Pa.; Consumptive Use of up to 5.000 mgd; Approval Date: August 11.... Chesapeake Appalachia, LLC, Pad ID: Wolf, ABR-201008158, Athens Township, Bradford County, Pa.; Consumptive...

  11. 75 FR 4901 - Notice of Projects Approved for Consumptive Uses of Water

    Science.gov (United States)

    2010-01-29

    ... 2, 2009. 30. EOG Resources, Inc., Pad ID: Ward M 1H, ABR-20090421.1, Springfield Township, Bradford....; Consumptive Use of up to 4.990 mgd; Approval Date: December 29, 2009. 65. EOG Resources, Inc., Pad ID: Kenyon...

  12. Precision formed micro magnets: LDRD project summary report

    Energy Technology Data Exchange (ETDEWEB)

    CHRISTENSON,TODD R.; GARINO,TERRY J.; VENTURINI,EUGENE L.

    2000-02-01

    A microfabrication process is described that provides for the batch realization of miniature rare earth based permanent magnets. Prismatic geometry with features as small as 5 microns, thicknesses up through several hundred microns and with submicron tolerances may be accommodated. The processing is based on a molding technique using deep x-ray lithography as a means to generate high aspect-ratio precision molds from PMMA (poly methyl methacrylate) used as an x-ray photoresist. Subsequent molding of rare-earth permanent magnet (REPM) powder combined with a thermosetting plastic binder may take place directly in the PMMA mold. Further approaches generate an alumina form replicated from the PMMA mold that becomes an intermediate mold for pressing higher density REPM material and allows for higher process temperatures. Maximum energy products of 3--8 MGOe (Mega Gauss Oersted, 1 MGOe = 100/4{pi} kJ/m{sup 3}) are obtained for bonded isotropic forms of REPM with dimensions on the scale of 100 microns and up to 23 MGOe for more dense anisotropic REPM material using higher temperature processing. The utility of miniature precision REPMs is revealed by the demonstration of a miniature multipole brushless DC motor that possesses a pole-anisotropic rotor with dimensions that would otherwise prohibit multipole magnetization using a multipole magnetizing fixture at this scale. Subsequent multipole assembly also leads to miniaturized Halbach arrays, efficient magnetic microactuators, and mechanical spring-like elements which can offset miniaturized mechanical scaling behavior.

  13. EU-approved rapid tests for bovine spongiform encephalopathy detect atypical forms: a study for their sensitivities.

    Directory of Open Access Journals (Sweden)

    Daniela Meloni

    Full Text Available Since 2004 it become clear that atypical bovine spongiform encephalopthies (BSEs exist in cattle. Whenever their detection has relied on active surveillance plans implemented in Europe since 2001 by rapid tests, the overall and inter-laboratory performance of these diagnostic systems in the detection of the atypical strains has not been studied thoroughly to date. To fill this gap, the present study reports on the analytical sensitivity of the EU-approved rapid tests for atypical L- and H-type and classical BSE in parallel. Each test was challenged with two dilution series, one created from a positive pool of the three BSE forms according to the EURL standard method of homogenate preparation (50% w/v and the other as per the test kit manufacturer's instructions. Multilevel logistic models and simple logistic models with the rapid test as the only covariate were fitted for each BSE form analyzed as directed by the test manufacturer's dilution protocol. The same schemes, but excluding the BSE type, were then applied to compare test performance under the manufacturer's versus the water protocol. The IDEXX HerdChek ® BSE-scrapie short protocol test showed the highest sensitivity for all BSE forms. The IDEXX® HerdChek BSE-scrapie ultra short protocol, the Prionics®--Check WESTERN and the AJ Roboscreen® BetaPrion tests showed similar sensitivities, followed by the Roche® PrionScreen, the Bio-Rad® TeSeE™ SAP and the Prionics®--Check PrioSTRIP in descending order of analytical sensitivity. Despite these differences, the limit of detection of all seven rapid tests against the different classes of material set within a 2 log(10 range of the best-performing test, thus meeting the European Food Safety Authority requirement for BSE surveillance purposes. These findings indicate that not many atypical cases would have been missed surveillance since 2001 which is important for further epidemiological interpretations of the sporadic character of

  14. Streamlining the Capstone Process: A Time-Saving Approval System for Graduate Theses/Projects

    Science.gov (United States)

    Grooms, James; Kline, Douglas; Cummings, Jeffrey

    2016-01-01

    Capstones have become an integral part of many information systems programs, both at the undergraduate and graduate level. One of the challenges can be tracking the process from the start of the capstone to completion. This paper describes the analysis, design and implementation of a web application for the approval workflow of a master's program…

  15. K Basins Spent Nuclear Fuel (SNF) Project Safety Analysis Report for Packaging (SARP) approval plan

    International Nuclear Information System (INIS)

    1995-01-01

    This document delineates the plan for preparation, review, and approval of the K Basins Spent Nuclear Fuel (SNF) Packaging Design Criteria (PDC) document and the on-site Safety Analysis Report for Packaging (SARP). The packaging addressed in these documents is used to transport SNF in a Multi- canister Overpack (MCO) configuration

  16. [Applications and approved projects on traditional Chinese medicine in National Natural Science Foundation of China in 2010].

    Science.gov (United States)

    Shang, Hong-cai; Huang, Jin-ling; Han, Li-wei; Pei, Ling-peng; Guo, Lin; Lin, Na; Wang, Chang-en

    2011-10-01

    In this article, the authors firstly summarized the number of applications submitted to and projects supported by the National Natural Science Foundation of China (NSFC) in the field of traditional Chinese medicine research in 2010. Then they described the district distribution, research direction layout and allotment of the approved projects in the three primary disciplines (traditional Chinese medicine, Chinese materia medica and integrated traditional Chinese and Western medicine) and their 43 subdisciplines. The targeting suggestions for improvement were given respectively by concluding the reason of disapproved projects from the point of view of applicants and supporting institution, and by stating the common problems existing in the review process from the perspectives of fund managers and evaluation experts. Lastly, the major funding fields in the near future were predicted in the hope of providing guidance for applicants.

  17. SOFTWARE IMPLEMENTATION OF FORMING OF COLOR-BASED CARDS FOR ASSESSMENT OF EARLY STAGES INNOVATION PROJECTS

    Directory of Open Access Journals (Sweden)

    Ekaterina I. Bragina

    2015-01-01

    Full Text Available The article deals with functional program that allows to generate a visualrepresentation of the shareholder tothe innovative project early stage ofdevelopment, formed a color-based cards.

  18. 77 FR 67735 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee

    Science.gov (United States)

    2012-11-13

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and Publications...

  19. 78 FR 78516 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee.

    Science.gov (United States)

    2013-12-26

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee. AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and Publications...

  20. 76 FR 45007 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee

    Science.gov (United States)

    2011-07-27

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and Publications...

  1. 78 FR 41193 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee

    Science.gov (United States)

    2013-07-09

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and Publications...

  2. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1998 edition

    International Nuclear Information System (INIS)

    1998-08-01

    The information contained in this report is given in six tables. Tables 1 to 4 present administrative data including issue and expiration dates, package identification, package serial numbers, modes for which the package/shipments approved and the edition of Safety Series No. 6 on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table 5. Table 6 shows the certificates reported to the IAEA Secretariat by each participating Member State

  3. Preliminary methodological proposal for estimating environmental flows in projects approved by the ministry of environment and sustainable development (MADS), Colombia

    International Nuclear Information System (INIS)

    Pinilla Agudelo, Gabriel A; Rodriguez Sandoval, Erasmo A; Camacho Botero, Luis A

    2014-01-01

    A methodological proposal for estimating environmental flows in large projects approved by Agencia Nacional de Licencias Ambientales (ANLA) in Colombian rivers was developed. The project is the result of an agreement between the MADS and the Universidad Nacional de Colombia, Bogota (UNC). The proposed method begins with an evaluation of hydrological criteria, continues with a hydraulic and water quality validation, and follows with the determination of habitat integrity. This is an iterative process that compares conditions before and after the project construction and allows to obtain the magnitude of a monthly flow that, besides preserving the ecological functions of the river, guarantees the water uses downstream. Regarding to the biotic component, the proposal includes the establishment and monitoring of biotic integrity indices for four aquatic communities (periphyton, macro invertebrates, riparian vegetation, and fish). The effects that flow reduction may produce in the medium and long term can be assessed by these indices. We present the results of applying the methodology to several projects licensed by the MADS.

  4. Environmental permits and approvals plan for high-level waste interim storage, Project W-464

    International Nuclear Information System (INIS)

    Deffenbaugh, M.L.

    1998-01-01

    This report discusses the Permitting Plan regarding NEPA, SEPA, RCRA, and other regulatory standards and alternatives, for planning the environmental permitting of the Canister Storage Building, Project W-464

  5. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1991 edition

    International Nuclear Information System (INIS)

    1991-08-01

    The format of this report is a result of recommendations made by the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM) at its 6th meeting in November 1987. The database was at that time maintained on the main frame and it was felt that adapting it for use on a personal computer would allow more flexibility in data processing and reporting. This document supersedes TECDOC-552 ''Directory of National Competent Authorities' Approval Certificates for Package Design and Shipment of Radioactive Material 1990 Edition''. Since publication of TECDOC-552, some modifications affecting the structure of the database and reporting formats were undertaken. These are fully described in ''Working Material: The PACKTRAM Database National Competent Authority Package Approval Certificates, User Guide Rev. 1'', which was released in early 1991. The present report is contained in five tables. In each of these, information is presented in alphabetical order based on the certificate number. This is composed of the issuing Member State's VRI code, followed by a slash, then a three- or four-digit number, another slash and finally a code identifying the type of package involved. ''-85'' is appended to those certificates that were approved on the basis of the 1985 Edition of Safety Series No. 6. Tables 1 to 4 present administrative data including issue and expire, dates, package identification, package serial numbers, modes for which the package/shipment is approved and the edition of Safety Series No. 6 on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table. 5

  6. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1993 ed

    International Nuclear Information System (INIS)

    1993-10-01

    This is the fourth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM, whose memberships consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last two complete calendar years. The 1985 Edition of IAEA Safety Series No. 6, the 'Regulations for the Safe Transport of Radioactive Material'' highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs

  7. Directory of national competent authorities` approval certificates for package design, special form material and shipment of radioactive material. 1995 edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    This is the sixth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA`s transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last complete calendar year. The 1985 Edition of IAEA Safety Series No. 6, the ``Regulations for the Safe Transport of Radioactive Material`` highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs.

  8. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1999 Edition

    International Nuclear Information System (INIS)

    1999-08-01

    This is the tenth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Transport Safety Standards Advisory Committee (TRANSSAC), formerly known as the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM and endorsed by TRANSSAC, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last complete calendar year. The 1985 Edition of IAEA Safety Series No. 6, the 'Regulations for the Safe Transport of Radioactive Material' highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material

  9. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1994 ed

    International Nuclear Information System (INIS)

    1994-08-01

    This is the fifth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last two complete calendar years. The 1985 Edition of IAEA Safety Series No. 6, the ''Regulations for the Safe Transport of Radioactive Material'' highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material

  10. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1996 edition

    International Nuclear Information System (INIS)

    1996-09-01

    This is the seventh annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificated (PACKTRAM) at the recommendation of the then Standing Advisory Group on the Sate Transport of Radioactive Material (SAGSTRAM). The functions of SAGSTRAM were taken over in 1996 by the Transport Safety Standards Advisory Committee (TRANSSAC). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last complete calendar year. The 1985 Edition of IAEA Safety Series No. 6, the ''Regulations for the Safe Transport of Radioactive Material'', highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs

  11. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1995 edition

    International Nuclear Information System (INIS)

    1995-09-01

    This is the sixth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last complete calendar year. The 1985 Edition of IAEA Safety Series No. 6, the ''Regulations for the Safe Transport of Radioactive Material'' highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs

  12. Oblique projections and standard-form transformations for discrete inverse problems

    DEFF Research Database (Denmark)

    Hansen, Per Christian

    2013-01-01

    This tutorial paper considers a specific computational tool for the numerical solution of discrete inverse problems, known as the standard-form transformation, by which we can treat general Tikhonov regularization problems efficiently. In the tradition of B. N. Datta's expositions of numerical li...... linear algebra, we use the close relationship between oblique projections, pseudoinverses, and matrix computations to derive a simple geometric motivation and algebraic formulation of the standard-form transformation....

  13. FERC approves process for Lake Erie link: Project meets significant regulatory milestone

    International Nuclear Information System (INIS)

    Anon

    2002-01-01

    The Federal Electric Regulatory Commission (FERC) of the United States has issued an order to TransEnergie US Ltd., and Hydro One Inc., authorizing the sale of transmission rights for the proposed Lake Erie link. This project will consists of bi-directional high voltage direct current facilities connecting the transmission grids of Ontario, Canada and the United States. The sale is authorized to proceed via a non-discriminatory 'open season' process. The project will consist of buried underwater cables under Lake Erie connecting the transmission systems near Simcoe, Ontario with those in the US at either, or both, of Springfield, Pennsylvania, and Ashtabula, Ohio. The project will provide an increase in transmission capability of up to 975 MW between the electric control areas of the Ontario Independent Electricity Market Operator, the East Central Area Reliability Coordination Agreement in Ohio and the Pennsylvania-New Jersey-Maryland Interconnection. The Lake Erie Link will be financially supported by those consumers who see value in the associated transmission rights, rather than through the regulated rates paid by transmission customers in general. The article provides an overview of the background of the Lake Erie Link, the cable system, the converter station, and the potential economic benefits

  14. A projection-based approach to general-form Tikhonov regularization

    DEFF Research Database (Denmark)

    Kilmer, Misha E.; Hansen, Per Christian; Espanol, Malena I.

    2007-01-01

    We present a projection-based iterative algorithm for computing general-form Tikhonov regularized solutions to the problem minx| Ax-b |2^2+lambda2| Lx |2^2, where the regularization matrix L is not the identity. Our algorithm is designed for the common case where lambda is not known a priori...

  15. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2000 edition

    International Nuclear Information System (INIS)

    2000-08-01

    Safety in the transport of radioactive material is dependent on packaging appropriate for the contents being shipped, rather than on operational and/or administrative actions required on the package. The grater the radiological risk posed by the material being moved, the more stringent become the performance for the packaging that can be authorised to contain it. These principles have been expanded since 1061 into a set of regulations that are responsible for safety moving the ever-growing number and complexity of radioactive material shipments throughout the world. The IAEA Regulations for the Safe Transport of Radioactive Material are incorporated into UN regulations, as well as the requirements of other international transport organizations. This is the eleventh report published by the IAEA since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Transport safety Standards Advisory Committee (TRANSSAC). Through the PACKTRAM database, the IAEA collects administrative and technical information provided by the issuing competent authority about package approval certificates

  16. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1997 Edition

    International Nuclear Information System (INIS)

    1997-08-01

    This is the eighth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the then Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The functions of SAGSTRAM were taken over in 1996 by the Transport Safety Standards Advisory Committee (TRANSSAC). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consisted of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who showed a keen interest in the IAEA's transport safety programme. TRANSSAC underscores the importance of data collecting activities and recommends the continued publication of this annual report. The 1985 Edition of Safety Series No. 6, the ''Regulations for the Safe Transport of Radioactive Material'', highlights the role of competent authorities in assuring regulatory compliance in their own countries. The issuance of package approval certificates is an important aspects of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs

  17. Synthetic ALSPAC longitudinal datasets for the Big Data VR project [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Demetris Avraam

    2017-08-01

    Full Text Available Three synthetic datasets - of observation size 15,000, 155,000 and 1,555,000 participants, respectively - were created by simulating eleven cardiac and anthropometric variables from nine collection ages of the ALSAPC birth cohort study. The synthetic datasets retain similar data properties to the ALSPAC study data they are simulated from (co-variance matrices, as well as the mean and variance values of the variables without including the original data itself or disclosing participant information.  In this instance, the three synthetic datasets have been utilised in an academia-industry collaboration to build a prototype virtual reality data analysis software, but they could have a broader use in method and software development projects where sensitive data cannot be freely shared.

  18. Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2004 ed

    International Nuclear Information System (INIS)

    2004-10-01

    The PACKTRAM database contains administrative and technical information provided annually by the issuing competent authority about package approval certificates. Such data are used mainly by national competent authorities and port and customs officials to assist in regulating radioactive material movements in their country, and also by manufacturers and shippers of radioactive material. The database carries information on extant certificates and those that expired within the last complete calendar year. This is the fifteenth PACKTRAM annual report to being published by the IAEA. It is distributed worldwide mainly to designated competent authorities, as well as to registered interested parties. The database itself is maintained at www.packtram.org and can be accessed by the general public

  19. The PACKTRAM database on national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. User's guide for compiled system program

    International Nuclear Information System (INIS)

    1995-01-01

    The PACKTRAM system program enables Member States to prepare data diskettes on national competent authorities' approval certificates for package design, special form material and shipment of radioactive material, for submission to the IAEA, and facilitates data manipulation and report preparation for the IAEA. The system program is provided as a 424 kbyte executable file, for which this document is the User Guide. The system is fully menu-driven and requires an IBM-compatible personal computer with a minimum of 640 kbyte random access memory, a hard drive and one 3-1/2 inch diskette drive. 3 refs, 6 tabs

  20. 33 CFR Appendix - List of FPC Standard Articles Forms Used in Permits and Licenses for Hydroelectric Projects

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false List of FPC Standard Articles Forms Used in Permits and Licenses for Hydroelectric Projects Navigation and Navigable Waters CORPS OF... Forms Used in Permits and Licenses for Hydroelectric Projects The following FPC standard articles Forms...

  1. INFORMATION SUPPORT OF THE PROJECT AS A METHOD OF FORMING METASUBJECT KNOWLEDGE

    Directory of Open Access Journals (Sweden)

    И Ф Зыкова

    2016-12-01

    Full Text Available One of the fastest growing educational facilities is an online training. it is aimed at the remote receive quality knowledge in different subjects and disciplines. Given the prospects for the development of teaching aids, we have considered the possibility of its integration into the traditional school systems. In particular, we have demonstrated the implementation of this method of learning through project- based learning - students create educational materials that will be posted on the Internet.In the article the different software tools were analyzed, allowing to implement all stages of the project development with the help of cloud computing, that is, providing a collaborative and interactive way to work on the project. There are online boards for the initial stages of project development, software for management and structured storage of documents, as well as platforms that enable aesthetically and creatively presentation of the project.Given the metasubject nature of topology, the integrative component of a method of projects, we have created an online tutorial on “A method of solving mazes.” Which answers our goal - to investigate the possibility of forming metasubject knowledge by studying the topological elements in the school course.

  2. PRELIMINARY METHODOLOGICAL PROPOSAL FOR ESTIMATING ENVIRONMENTAL FLOWS IN PROJECTS APPROVED BY THE MINISTRY OF ENVIRONMENT AND SUSTAINABLE DEVELOPMENT (MADS, COLOMBIA

    Directory of Open Access Journals (Sweden)

    Gabriel A. Pinilla Agudelo

    2014-01-01

    Full Text Available ABSTRACT A methodological proposal for estimating environmental flows in large projects approved by Agencia Nacional de Licencias Ambientales (ANLA in Colombian rivers was developed. The project is the result of an agreement between the MADS and the Universidad Nacional de Colombia, Bogotá (UNC. The proposed method begins with an evaluation of hydrological criteria,continues with a hydraulic and water quality validation, and follows with the determination of habitat integrity. This is an iterative process that compares conditions before and after the project construction and allows to obtain the magnitude of a monthly flow that, besides preserving the ecological functions of the river, guarantees the water uses downstream. Regarding to the biotic component, the proposal includes the establishment and monitoring of biotic integrity indices for four aquatic communities (periphyton, macroinvertebrates, riparian vegetation, and fish. The effects that flow reduction may produce in the medium and long term can be assessed by these indices. We present the results of applying the methodology to several projects licensed by the MADS. RESUMEN Se presenta una propuesta metodológica para estimar los caudales ambientales en grandes proyectos licenciados por la Agencia Nacional de Licencias Ambientales (ANLA de Colombia, resultado de un convenio interadministrativo suscrito entre el ahora Ministerio de Ambiente y Desarrollo Sostenible (MADS de Colombia y la Universidad Nacional de Colombia, Bogotá (UNC. El método propuesto parte de garantizar criterios hidrológicos, continúa con una validación hidráulica y de calidad del agua, sigue con la determinación de la integridad del hábitat, en un proceso iterativo que requiere evaluación para las condiciones antes y después de la construcción del proyecto y que permite establecer un caudal que, además de conservar las funciones ecológicas del río, garantiza los usos del recurso aguas abajo. Espec

  3. 75 FR 65499 - Agency Information Collection Activities: Form I-600/I-600A, Extension of a Currently Approved...

    Science.gov (United States)

    2010-10-25

    ... Classify Orphan as an Immediate Relative and Application for Advance Processing of Orphan Petition; OMB... encouraged and will be accepted until November 24, 2010. This process is conducted in accordance with 5 CFR...) Title of the Form/Collection: Petition to Classify Orphan as an Immediate Relative and Application for...

  4. Final waste forms project: Performance criteria for phase I treatability studies

    International Nuclear Information System (INIS)

    Gilliam, T.M.; Hutchins, D.A.; Chodak, P. III

    1994-06-01

    This document defines the product performance criteria to be used in Phase I of the Final Waste Forms Project. In Phase I, treatability studies will be performed to provide open-quotes proof-of-principleclose quotes data to establish the viability of stabilization/solidification (S/S) technologies. This information is required by March 1995. In Phase II, further treatability studies, some at the pilot scale, will be performed to provide sufficient data to allow treatment alternatives identified in Phase I to be more fully developed and evaluated, as well as to reduce performance uncertainties for those methods chosen to treat a specific waste. Three main factors influence the development and selection of an optimum waste form formulation and hence affect selection of performance criteria. These factors are regulatory, process-specific, and site-specific waste form standards or requirements. Clearly, the optimum waste form formulation will require consideration of performance criteria constraints from each of the three categories. Phase I will focus only on the regulatory criteria. These criteria may be considered the minimum criteria for an acceptable waste form. In other words, a S/S technology is considered viable only if it meet applicable regulatory criteria. The criteria to be utilized in the Phase I treatability studies were primarily taken from Environmental Protection Agency regulations addressed in 40 CFR 260 through 265 and 268; and Nuclear Regulatory Commission regulations addressed in 10 CFR 61. Thus the majority of the identified criteria are independent of waste form matrix composition (i.e., applicable to cement, glass, organic binders etc.)

  5. Final waste forms project: Performance criteria for phase I treatability studies

    Energy Technology Data Exchange (ETDEWEB)

    Gilliam, T.M. [Oak Ridge National Lab., TN (United States); Hutchins, D.A. [Martin Marietta Energy Systems, Inc., Oak Ridge, TN (United States); Chodak, P. III [Massachusetts Institute of Technology (United States)

    1994-06-01

    This document defines the product performance criteria to be used in Phase I of the Final Waste Forms Project. In Phase I, treatability studies will be performed to provide {open_quotes}proof-of-principle{close_quotes} data to establish the viability of stabilization/solidification (S/S) technologies. This information is required by March 1995. In Phase II, further treatability studies, some at the pilot scale, will be performed to provide sufficient data to allow treatment alternatives identified in Phase I to be more fully developed and evaluated, as well as to reduce performance uncertainties for those methods chosen to treat a specific waste. Three main factors influence the development and selection of an optimum waste form formulation and hence affect selection of performance criteria. These factors are regulatory, process-specific, and site-specific waste form standards or requirements. Clearly, the optimum waste form formulation will require consideration of performance criteria constraints from each of the three categories. Phase I will focus only on the regulatory criteria. These criteria may be considered the minimum criteria for an acceptable waste form. In other words, a S/S technology is considered viable only if it meet applicable regulatory criteria. The criteria to be utilized in the Phase I treatability studies were primarily taken from Environmental Protection Agency regulations addressed in 40 CFR 260 through 265 and 268; and Nuclear Regulatory Commission regulations addressed in 10 CFR 61. Thus the majority of the identified criteria are independent of waste form matrix composition (i.e., applicable to cement, glass, organic binders etc.).

  6. Dopamine neurons projecting to the posterior striatum form an anatomically distinct subclass

    Science.gov (United States)

    Menegas, William; Bergan, Joseph F; Ogawa, Sachie K; Isogai, Yoh; Umadevi Venkataraju, Kannan; Osten, Pavel; Uchida, Naoshige; Watabe-Uchida, Mitsuko

    2015-01-01

    Combining rabies-virus tracing, optical clearing (CLARITY), and whole-brain light-sheet imaging, we mapped the monosynaptic inputs to midbrain dopamine neurons projecting to different targets (different parts of the striatum, cortex, amygdala, etc) in mice. We found that most populations of dopamine neurons receive a similar set of inputs rather than forming strong reciprocal connections with their target areas. A common feature among most populations of dopamine neurons was the existence of dense ‘clusters’ of inputs within the ventral striatum. However, we found that dopamine neurons projecting to the posterior striatum were outliers, receiving relatively few inputs from the ventral striatum and instead receiving more inputs from the globus pallidus, subthalamic nucleus, and zona incerta. These results lay a foundation for understanding the input/output structure of the midbrain dopamine circuit and demonstrate that dopamine neurons projecting to the posterior striatum constitute a unique class of dopamine neurons regulated by different inputs. DOI: http://dx.doi.org/10.7554/eLife.10032.001 PMID:26322384

  7. Forms of presentism in the history of science. Rethinking the project of historical epistemology.

    Science.gov (United States)

    Loison, Laurent

    2016-12-01

    Since the late 1980s, presentism has seen a resurgence among some historians of science. Most of them draw a line between a good form of presentism and typical anachronism, but where the line should be drawn remains an open question. The present article aims at resolving this problem. In the first part I define the four main distinct forms of presentism at work in the history of science and the different purposes they serve. Based on this typology, the second part reconsiders what counts as anachronism, Whiggism and positivist history. This clarification is used as a basis to rethink the research program of historical epistemology in the third section. Throughout this article, I examine the conceptual core of historical epistemology more than its actual history, from Bachelard to Foucault or others. Its project should be defined - as Canguilhem suggested - as an attempt to account for both the contingency and the rationality of science. As such, historical epistemology is based on a complex fifth form of presentism, which I call critical presentism. The critical relation at stake not only works from the present to the past, because of the acknowledged rationality of science, but also from the past to the present because of the contingency and historicity of scientific knowledge. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. "The Project Cannot Be Approved in Its Current Form": Feminist Visual Research Meets the Human Research Ethics Committee

    Science.gov (United States)

    Pitt, Penelope

    2014-01-01

    This article reflects on a university human research ethics committee's unease regarding a feminist visual pilot study within the field of education. The small exploratory study proposed to explore a migrant mother's production of her son's identity through her family photograph collection. The committee requested substantial…

  9. Authority approvals and environmental investigations

    International Nuclear Information System (INIS)

    Olsen, F.A.; Svenson, J.

    1999-01-01

    The possible sites have been reviewed environmentally and approved in principle by the Danish authorities through 'The Offshore Wind Turbine Committee'. Therefore, environmental studies were not expected to form par of this study. However, the contacts to the authorities revealed a need for further investigations. A required Environmental Impact Study shall be performed in accordance with EC directive of June 27 1985 and March 3 1997, and more specific requirements from the Danish authorities. The possible visual impacts of the proposed large scale offshore project at Roedsand proved to be a major issue for the local acceptance of the projects. Therefore, computer aided visualisations of selected views of all 3 projects were performed and presented to the public. The visualisations were performed with dedicated computer programmes and are presented on colour photos seen from land, sea and air. As a conclusion, the possible visual impact of the proposed projects are not found to be prohibitive for a realisation of the proposed projects. (LN)

  10. Projection of the rotation form Navier-Stokes equation onto the half-staggered grid

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Ji Ryong [Inje University, Kimhae (Korea, Republic of)

    2016-07-15

    A projection method for computing incompressible fluid flow is proposed. For the method, the rotation form Navier-Stokes equation (NSE), for which the velocity and the total pressure are employed, is discretized on the half-staggered, finite difference spatial grid. The total pressure couples the static pressure gradient and the convection of momentum in the continuous NSE while the half-staggered grid provides weak pressure-velocity coupling in discrete space. These two features interact synergistically for the discretized NSE to produce smooth pressure fields without additional numerical artifacts such as the momentum interpolation. The method preserves the kinetic energy at the inviscid limit condition. Numerical solutions of the decaying Taylor vortex, the inviscid Taylor vortex, the sudden expansion channel and the square-prism wake are presented.

  11. Organized Communities as a Hybrid Form of Data Sharing: Experiences from the Global STEP Project

    Directory of Open Access Journals (Sweden)

    Isabell Stamm

    2018-01-01

    Full Text Available With this article, I explore a new way of how social scientists can share primary qualitative data with each other. More specifically, I examine organized research communities, which are small membership groups of scholars. This hybrid form of data sharing is positioned between informal sharing through collaboration and institutionalized sharing through accessing research archives. Using the global "Successful Transgenerational Entrepreneurship Practices" (STEP project as an example, I draw attention to the pragmatic practices of data sharing in such communities. Through ongoing negotiations, organized communities can, at least temporarily, put forward sharing policies and create a culture of data sharing that elevates the re-use of qualitative data while being mindful of the data's intersubjective and processual character.

  12. Decree 328/003. Is approve the organizational structure reformulation project of the regulatory unit of Unit 006 Energy and water services of subsection 02 Presidency of the Republic

    International Nuclear Information System (INIS)

    2003-01-01

    This decree approve the organizational structure project of The regulatory energy and water services ( URSEA). This unit is responsible for monitoring the activities related to electricity, gas, drinking water, sanitation and oil, fuel and other hydrocarbon derivatives

  13. THE DEVELOPMENT OF A MODEL INITIATION OF PROJECT IN A FORM OF MARKOV CHAIN

    Directory of Open Access Journals (Sweden)

    Катерина Вікторівна КОЛЕСНІКОВА

    2017-03-01

    Full Text Available The model of the initiation of projects which reproduces a fragment of the general scheme of interaction between the main entities in the project initiation phase is created. Determined that the project initiation through communication links between the four main entities: projects team, environment, the project itself and the customer. The result of the initiation of projects in the emerging communications referred to objects in the design phase through consistency requirements of stakeholders and the adoption of the basic concepts of projects, goal-projects, project planning, evaluation requirements of specialization and competence required for the formation of the project team. This Markov chain is part of the control circuit that includes elements such as the temporary organizational structure of the project design, project team, customer, and environment project. It is shown that the Markov model of interaction between project participants in their initiation phase, taking into account the role of a key player in the project ‑ the customer can determine changes of state and generate recommendations for initiating projects. Results of the study can serve as a basis for creating models of control objects that contain its organizational structure and reflect the parametric properties of the system to obtain information needed for decision making to initiate projects

  14. 75 FR 62630 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee

    Science.gov (United States)

    2010-10-12

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and...

  15. 75 FR 39330 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee

    Science.gov (United States)

    2010-07-08

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and...

  16. 75 FR 55404 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee

    Science.gov (United States)

    2010-09-10

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and...

  17. 24 CFR 5.661 - Section 8 project-based assistance programs: Approval for police or other security personnel to...

    Science.gov (United States)

    2010-04-01

    ... personnel who will reside in the project, and the period of residence by such personnel. How owner proposes... purpose, “owner” includes a principal or other interested party. (iv) How residence by security personnel in a project unit will increase security for Section 8 assisted families residing in the project. (v...

  18. Variation in standards of research compensation and child assent practices: a comparison of 69 institutional review board-approved informed permission and assent forms for 3 multicenter pediatric clinical trials.

    Science.gov (United States)

    Kimberly, Michael B; Hoehn, K Sarah; Feudtner, Chris; Nelson, Robert M; Schreiner, Mark

    2006-05-01

    To systematically compare standards for compensation and child participant assent in informed permission, assent, and consent forms (IP-A-CFs) approved by 55 local institutional review boards (IRBs) reviewing 3 standardized multicenter research protocols. Sixty-nine principal investigators participating in any of 3 national, multicenter clinical trials submitted standardized research protocols for their trials to their local IRBs for approval. Copies of the subsequently IRB-approved IP-A-CFs were then forwarded to an academic clinical research organization. This collection of IRB-approved forms allowed for a quasiexperimental retrospective evaluation of the variation in informed permission, assent, and consent standards operationalized by the local IRBs. Standards for compensation and child participant assent varied substantially across 69 IRB-approved IP-A-CFs. Among the 48 IP-A-CFs offering compensation, monetary compensation was offered by 33 as reimbursement for travel, parking, or food expenses, whereas monetary or material compensation was offered by 22 for subject inconvenience and by 13 for subject time. Compensation ranged widely within and across studies (study 1, $180-1425; study 2, $0-500; and study 3, $0-100). Regarding child participant assent, among the 57 IP-A-CFs that included a form of assent documentation, 33 included a line for assent on the informed permission or consent form, whereas 35 included a separate form written in simplified language. Of the IP-A-CFs that stipulated the documentation of assent, 31 specified > or =1 age ranges for obtaining assent. Informed permission or consent forms were addressed either to parents or child participants. In response to identical clinical trial protocols, local IRBs generate IP-A-CFs that vary considerably regarding compensation and child participant assent.

  19. Can an ethics officer role reduce delays in research ethics approval? A mixed-method evaluation of an improvement project

    Science.gov (United States)

    Dixon-Woods, Mary; Foy, Chris; Hayden, Charlotte; Al-Shahi Salman, Rustam; Tebbutt, Stephen; Schroter, Sara

    2016-01-01

    Objective Frustration continues to be directed at delays in gaining approvals for undertaking health research in the UK. We aimed to evaluate the impact of an ethics officer intervention on rates of favourable opinions (approval) and provisional opinions (requiring revision and resubmission) and on the time taken to reach a final opinion by research ethics committees (RECs), to characterise how the role operated in practice, and to investigate applicants' views. Design Mixed-method study involving (i) a 2-group, non-randomised before-and-after intervention study of RECs assigned an ethics officer and a matched comparator group; (ii) a process evaluation involving a survey of applicants and documentary analysis. Participants 6 RECs and 3 associated ethics officers; 18 comparator RECs; REC applicants. Results Rates of provisional and favourable opinions between ethics officer and comparator RECs did not show a statistically significant effect of the intervention (logistic regression, p=0.26 for favourable opinions and p=0.31 for provisional opinions). Mean time to reach a decision showed a non-significant reduction (ANOVA, p=0.22) from 33.3 to 32.0 days in the ethics officer RECs compared with the comparator RECs (32.6 to 32.9 days). The survey (30% response rate) indicated applicant satisfaction and also suggested that ethics officer support might be more useful before submission. Ethics officers were successful in identifying many issues with applications, but the intervention did not function exactly as designed: in 31% of applicants, no contact between the applicants and the ethics officer took place before REC review. Limitations This study was a non-randomised comparison cohort study. Some data were missing. Conclusions An ethics officer intervention, as designed and implemented in this study, did not increase the proportion of applications to RECs that were approved on first review and did not reduce the time to a committee decision. PMID:27580832

  20. Can an ethics officer role reduce delays in research ethics approval? A mixed-method evaluation of an improvement project.

    Science.gov (United States)

    Dixon-Woods, Mary; Foy, Chris; Hayden, Charlotte; Al-Shahi Salman, Rustam; Tebbutt, Stephen; Schroter, Sara

    2016-08-31

    Frustration continues to be directed at delays in gaining approvals for undertaking health research in the UK. We aimed to evaluate the impact of an ethics officer intervention on rates of favourable opinions (approval) and provisional opinions (requiring revision and resubmission) and on the time taken to reach a final opinion by research ethics committees (RECs), to characterise how the role operated in practice, and to investigate applicants' views. Mixed-method study involving (i) a 2-group, non-randomised before-and-after intervention study of RECs assigned an ethics officer and a matched comparator group; (ii) a process evaluation involving a survey of applicants and documentary analysis. 6 RECs and 3 associated ethics officers; 18 comparator RECs; REC applicants. Rates of provisional and favourable opinions between ethics officer and comparator RECs did not show a statistically significant effect of the intervention (logistic regression, p=0.26 for favourable opinions and p=0.31 for provisional opinions). Mean time to reach a decision showed a non-significant reduction (ANOVA, p=0.22) from 33.3 to 32.0 days in the ethics officer RECs compared with the comparator RECs (32.6 to 32.9 days). The survey (30% response rate) indicated applicant satisfaction and also suggested that ethics officer support might be more useful before submission. Ethics officers were successful in identifying many issues with applications, but the intervention did not function exactly as designed: in 31% of applicants, no contact between the applicants and the ethics officer took place before REC review. This study was a non-randomised comparison cohort study. Some data were missing. An ethics officer intervention, as designed and implemented in this study, did not increase the proportion of applications to RECs that were approved on first review and did not reduce the time to a committee decision. Published by the BMJ Publishing Group Limited. For permission to use (where not

  1. Integrating Employability into Degree Programmes Using Consultancy Projects as a Form of Enterprise

    Science.gov (United States)

    O'Leary, Simon

    2015-01-01

    This paper reports on an assessment of how enterprise initiatives develop graduate employability attributes, exploring the use of client consultancy projects as a platform for such enterprise provision in higher education. The study was based on reviews of recent literature and an appraisal of an institutional initiative using live projects as an…

  2. Final Project Report CFA-14-6357: A New Paradigm for Understanding Multiphase Ceramic Waste Form Performance

    Energy Technology Data Exchange (ETDEWEB)

    Brinkman, Kyle [Clemson Univ., SC (United States); Bordia, Rajendra [Clemson Univ., SC (United States); Reifsnider, Kenneth [Univ. of South Carolina, Columbia, SC (United States); Chiu, Wilson [Univ. of Connecticut, Storrs, CT (United States); Amoroso, Jake [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-12-28

    This project fabricated model multiphase ceramic waste forms with processing-controlled microstructures followed by advanced characterization with synchrotron and electron microscopy-based 3D tomography to provide elemental and chemical state-specific information resulting in compositional phase maps of ceramic composites. Details of 3D microstructural features were incorporated into computer-based simulations using durability data for individual constituent phases as inputs in order to predict the performance of multiphase waste forms with varying microstructure and phase connectivity.

  3. Application for approval of the Cold Lake Expansion Project: volume 3: environmental impact assessment: socio-economic assessment

    International Nuclear Information System (INIS)

    Anon.

    1997-02-01

    Anticipated social and economic effects from the construction and operation of the proposed Cold Lake Expansion Project in Alberta were described. The regions and communities that would be directly affected by the project were identified and project impacts with respect to the following areas were analyzed: population and demographics, local economy and labour force, education, health, social and recreational services, protective and emergency services, physical community infrastructure, real estate, and current community planning and land use initiatives. The main sources of information used for the analysis were public statistical data compiled by Statistics Canada, provincial government statistics and municipal planning documents. The overall social impact of the project was expected to range from low to medium. 50 refs., 44 tabs., 6 figs

  4. Public-private partnerships in urban regeneration projects: Organizational form or managerial capacity?

    NARCIS (Netherlands)

    M.B. Kort (Michiel); E-H. Klijn (Erik-Hans)

    2011-01-01

    markdownabstract__Abstract__ Urban regeneration companies (URCs) are public-private entities appearing across Europe. They are created specifically to manage and implement more effectively urban regeneration projects. Core ideas behind the establishment of these newly emerging partnerships aim to

  5. Design of an off-axis visual display based on a free-form projection screen to realize stereo vision

    Science.gov (United States)

    Zhao, Yuanming; Cui, Qingfeng; Piao, Mingxu; Zhao, Lidong

    2017-10-01

    A free-form projection screen is designed for an off-axis visual display, which shows great potential in applications such as flight training for providing both accommodation and convergence cues for pilots. The method based on point cloud is proposed for the design of the free-form surface, and the design of the point cloud is controlled by a program written in the macro-language. In the visual display based on the free-form projection screen, when the error of the screen along Z-axis is 1 mm, the error of visual distance at each filed is less than 1%. And the resolution of the design for full field is better than 1‧, which meet the requirement of resolution for human eyes.

  6. Bill project authorizing the approval of the amendment to the Convention on the physical protection of nuclear materials

    International Nuclear Information System (INIS)

    Juppe, Alain; Fillon, Francois

    2011-01-01

    This document deals with the amendment to the Convention on the Physical Protection of Nuclear Materials which has been adopted in July 2005. This amendment notably extended the Convention's scope, objectives, relation with other international instruments and content (regarding cooperation, sanctions, and so on). After the text of this amendment, this document contains the bill project which reports an impact study (estimated economic, financial, environmental, and legal consequences of the amendment implementation), comments the penal and criminal cooperation defined in the Convention. A table indicates the impact of the amendment's articles on the French law

  7. Bill project authorizing the approval of the amendment to the convention on physical protection of nuclear material - Nr 11

    International Nuclear Information System (INIS)

    Ayrault, Jean-Marc; Fabius, Laurent

    2012-01-01

    This document contains the brief text of the bill project and the text of the amendment to the Convention on physical protection of nuclear material which has been adopted in Vienna in August 2005 to amend the Convention adopted in October 1979. This amendment introduces the following measures: extension of the scope of application of the Convention to nuclear materials used for peaceful purposes, definition of the objectives of the Convention, articulation of the Convention with other international instruments, definition of the main principles of physical protection, strengthened international cooperation, legal issues concerning extradition and legal cooperation

  8. Digitisation Project Planning in the Maribor City Library as a Form of Regional Cross Institutional Cooperation

    Directory of Open Access Journals (Sweden)

    Nina Hriberšek Vuk

    2013-09-01

    Full Text Available EXTENDED ABSTRACT:More and more Slovenian public libraries have been facing the question of selection criteria for digitisation of library materials as well as the issue of financial resources, copyright permission and the promotion of digitised materials. Libraries having long tradition of collecting valuable local history resources are more convinced about the selection criteria. Digitisation is, in spite of being expensive, time consuming and labour intensive, an easy method to enable quick access to library materials, to promote and preserve library collections. The mission of the central regional public library (cofinanced by the Ministry of Culture is not only to coordinate the collection, cataloguing and storage of local history resources but also to coordinate local history digital projects. Due to historical circumstances, the local history resources were first collected by the Maribor University Library. It is only in the recent past that the Maribor City Library has started to systematically collect these materials. Due to this fact, the Maribor City Library does not hold an extensive collection of rare and valuable local history items. It was initially faced with the problem of selection criteria for digitisation. However, it soon succeeded to establish the strategy to promote the local history collections in the region, regardless of their location. Thus the library started to cooperate with different regional institutions and the first partner projects were designed. In the year 2007 the library collaborated with the elementary school at Lovrenc na Pohorju and decided to digitise research papers of ex-pupils of the school. The first part of the project was accomplished in 2007 when 72 research papers were digitised, in the next two years their number was increased as the second part of the project was concluded. The papers were published on the KAMRA portal and the project was promoted at the summer annual meeting at Lovrenc na

  9. Yucca Mountain project canister material corrosion studies as applied to the electrometallurgical treatment metallic waste form

    International Nuclear Information System (INIS)

    Keiser, D.D.

    1996-11-01

    Yucca Mountain, Nevada is currently being evaluated as a potential site for a geologic repository. As part of the repository assessment activities, candidate materials are being tested for possible use as construction materials for waste package containers. A large portion of this testing effort is focused on determining the long range corrosion properties, in a Yucca Mountain environment, for those materials being considered. Along similar lines, Argonne National Laboratory is testing a metallic alloy waste form that also is scheduled for disposal in a geologic repository, like Yucca Mountain. Due to the fact that Argonne's waste form will require performance testing for an environment similar to what Yucca Mountain canister materials will require, this report was constructed to focus on the types of tests that have been conducted on candidate Yucca Mountain canister materials along with some of the results from these tests. Additionally, this report will discuss testing of Argonne's metal waste form in light of the Yucca Mountain activities

  10. METHODICAL APPROACHES TO FORMING INNOVATIVE PROJECT AND ENTERPRISE MANAGEMENT ORGANIZATIONAL STRUCTURES

    Directory of Open Access Journals (Sweden)

    A. O. Baklanov

    2011-01-01

    Full Text Available The following principles are discussed as methodical bases of the choice of innovative project and enterprise management organizational structures: hierarchism, bureaucratization, adhocratie, tent organization, lean business engineering, rational organization, amorphous organization, teaching organization. Conditions that complicate industrial and technological processes influence enterprise management process dynamics. The variety of existing types of organizational structures is determined by industrial, economic, psychological and social conditions.

  11. INFORMATION SUPPORT OF THE PROJECT AS A METHOD OF FORMING METASUBJECT KNOWLEDGE

    OpenAIRE

    И Ф Зыкова

    2016-01-01

    One of the fastest growing educational facilities is an online training. it is aimed at the remote receive quality knowledge in different subjects and disciplines. Given the prospects for the development of teaching aids, we have considered the possibility of its integration into the traditional school systems. In particular, we have demonstrated the implementation of this method of learning through project- based learning - students create educational materials that will be posted on the Int...

  12. ERM 593 Applied Project_Guidance for Reviewing and Approving a Waste Stream Profile in the Waste Compliance and Tracking System_Final_05-05-15

    Energy Technology Data Exchange (ETDEWEB)

    Elicio, Andy U. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-05-05

    My ERM 593 applied project will provide guidance for the Los Alamos National Laboratory Waste Stream Profile reviewer (i.e. RCRA reviewer) in regards to Reviewing and Approving a Waste Stream Profile in the Waste Compliance and Tracking System. The Waste Compliance and Tracking system is called WCATS. WCATS is a web-based application that “supports the generation, characterization, processing and shipment of LANL radioactive, hazardous, and industrial waste.” The LANL generator must characterize their waste via electronically by filling out a waste stream profile (WSP) in WCATS. Once this process is completed, the designated waste management coordinator (WMC) will perform a review of the waste stream profile to ensure the generator has completed their waste stream characterization in accordance with applicable state, federal and LANL directives particularly P930-1, “LANL Waste Acceptance Criteria,” and the “Waste Compliance and Tracking System User's Manual, MAN-5004, R2,” as applicable. My guidance/applied project will describe the purpose, scope, acronyms, definitions, responsibilities, assumptions and guidance for the WSP reviewer as it pertains to each panel and subpanel of a waste stream profile.

  13. VIDEO BLOGGING AS AN INNOVATIVE FORM OF THE PROJECT ACTIVITY IN FOREIGN LANGUAGE TEACHING TO JOURNALISM STUDENTS

    Directory of Open Access Journals (Sweden)

    M. V. Petrova

    2018-01-01

    Full Text Available Introduction. The appearance of new formats and ways of presenting information inevitably affects the educational process and leads to the necessity to revise the paradigm of pedagogical attitudes and tools of the teaching activity, which in turn generates a number of methodological and didactic problems to be solved. The relevance of the research topic is caused by the current tendency of the distribution of video blogging as an information activity tool that affects the educational environment. There is a steady development of video blogging (a special kind of blog, where the emphasis is made on video information as a new channel of communication in the educational services market, and using it as a separate form of non-educational project activity within the framework of mastering one or another academic discipline. In the conditions of deficiency of classroom hours and increase in student independent work, project-based education is becoming more and more demanded type of training. Currently, interdisciplinary projects are being widely disseminated at high school; these projects are aimed at vocational guidance for a foreign language, they meet the requirements of the new communication reality and the needs of modern educational systems. The aim of the publication is to consider video blogging as an innovative form of project-oriented learning a foreign language and to characterize the features of creating and implementing media content within the framework of a foreign language training course. Methodology and research methods. In the course the research, such theoretical scientific methods as analysis, synthesis, concretization, generalization, as well as hypothetical-deductive and design methods were applied. Results and scientific novelty. For the first time the article deals with the structure of video blogging as a project work and as a form of professionally oriented foreign language teaching as well, also there are formulated basic

  14. Cement waste form qualification report: WVDP [West Valley Demonstration Project] PUREX decontaminated supernatant

    International Nuclear Information System (INIS)

    McVay, C.W.; Stimmel, J.R.; Marchetti, S.

    1988-08-01

    This report provides a summary of work performed to develop a cement-based, low-level waste formulation suitable for the solidification of decontaminated high-level waste liquid produced as a by-product of PUREX spent fuel reprocessing. The resultant waste form is suitable for interim storage and is intended for ultimate disposal as low-level Class C waste; it also meets the stability requirements of the NRC Branch Technical Position on Waste Form Qualification, May 1983 and the requirements of 10 CFR 61. A recipe was developed utilizing only Portland Type I cement based on an inorganic salts simulant of the PUREX supernatant. The qualified recipe was tested full scale in the production facility and was observed to produce a product with entrained air, low density, and lower-than-expected compressive strength. Further laboratory scale testing with actual decontaminated supernatant revealed that set retarders were present in the supernatant, precluding setting of the product and allowing the production of ''bleed water.'' Calcium nitrate and sodium silicate were added to overcome the set retarding effect and produced a final product with improved performance when compared to the original formulation. This report describes the qualification process and qualification test results for the final product formulation. 7 refs., 38 figs., 21 tabs

  15. The effectiveness of Microsoft Project in assessing extension of time under PAM 2006 standard form of contract

    Science.gov (United States)

    Suhaida, S. K.; Wong, Z. D.

    2017-11-01

    Time is equal to money; and it is applies in the construction industry where time is very important. Most of the standard form of contracts provide contractual clauses to ascertain time and money related to the scenarios while Extension of Time (EOT) is one of them. Under circumstance and delays, contractor is allow to apply EOT in order to complete the works on a later completion date without Liquidated Damages (LD) imposed to the claimant. However, both claimants and assessors encountered problems in assessing the EOT. The aim of this research is to recommend the usage of Microsoft Project as a tool in assessing EOT associated with the standard form of contract, PAM 2006. A quantitative method is applied towards the respondents that consisted of architects and quantity surveyors (QS) in order to collect data on challenges in assessing EOT claims and the effectiveness of Microsoft Project as a tool. The finding of this research highlighted that Microsoft Project can serve as a basis to perform EOT tasks as this software can be used as a data bank to store handy information which crucial for preparing and evaluating EOT.

  16. Forming Social Justice Projects: Student Activists Reflect on Coalition-Building

    Directory of Open Access Journals (Sweden)

    Darren E. Lund

    2010-05-01

    Full Text Available Student activists share their experiences with racism and more specifically, their attempts to form school diversity initiatives. The author outlines a problematic lack of engagement of student activists in the scholarly literature on social justice, particularly related to their undervalued role as leaders in school-based antiracist coalitions. Excerpts from in-depth interviews with seven student participants in western Canadian schools offer new understandings on the potential of school-based activists. They explain the challenges and successes in building and sustaining activist coalitions and in pursuing their social justice efforts beyond school. Their contributions represent new voices to join the ongoing conversation in educational research and community activism.

  17. Yucca Mountain project : FY 2006 annual report for waste form testingactivities.

    Energy Technology Data Exchange (ETDEWEB)

    Ebert, W. L.; Fortner, J. A.; Guelis, A. V.; Cunnane, J. C.

    2006-11-01

    This report describes the experimental work performed at Argonne National Laboratory (Argonne) during fiscal year (FY 2006) under the Bechtel SAIC Company, LLC (BSC) Memorandum Purchase Order (MPO) contract number B004210CM3X. Because this experimental work is focused on the dissolution and precipitation behavior of neptunium, the report also includes, or incorporates by reference, earlier results that are relevant to presenting a more complete understanding of the likely behavior of neptunium under experimental conditions relevant to the Yucca Mountain repository. Important results relevant to the technical bases, validations, and conservatisms in current source term models are summarized. The CSNF samples were observed to corrode following the general contour of the surface rather than via (for instance) grain boundary attack. This supports the current approach of estimating the effective surface area of corroding CSNF based on the geometric surface area of fuel pellet fragments. It was observed that the neptunium and plutonium concentrations in corroded CSNF samples were somewhat higher at and near the corrosion front (i.e., at the interface between the alteration product ''rind'' layer and the underlying fuel) than in the bulk fuel. The neptunium and plutonium at the corrosion front and in the uranyl alteration layer were found to be in the quadravalent (4+) oxidation state. The uranyl phases that constitute most of the alteration rind were depleted in neptunium relative to the bulk fuel: neptunium concentrations in the uranyl alteration rind were less than 20% of that in the parent fuel. Homogeneous precipitation tests have shown that solids precipitate from a 1 x 10{sup -4} M Np(V) solution over the temperature range of 200-280 C, but no evidence was found that any solids precipitated from the same solution at 150 C through 289 days. The solids formed in the homogeneous precipitation tests were predominantly a Np(IV)-bearing phase

  18. Investigation of microscopic radiation damage in waste forms using ODNMR and AEM techniques. (EMSP Project Final Report)

    International Nuclear Information System (INIS)

    Liu, G.; Luo, J.; Beitz, J.; Li, S.; Williams, C.; Zhorin, V.

    2000-01-01

    This project seeks to understand the microscopic effects of radiation damage in nuclear waste forms. The authors' approach to this challenge encompasses studies of ceramics and glasses containing short-lived alpha- and beta-emitting actinides with electron microscopy, laser and X-ray spectroscopic techniques, and computational modeling and simulations. In order to obtain information on long-term radiation effects on waste forms, much of the effort is to investigate α-decay induced microscopic damage in 18-year old samples of crystalline yttrium and lutetium orthophosphates that initially contained ∼ 1(wt)% of the alpha-emitting isotope 244 Cm (18.1 y half life). Studies also are conducted on borosilicate glasses that contain 244 Cm, 241 Am, or 249 Bk, respectively. The authors attempt to gain clear insights into the properties of radiation-induced structure defects and the consequences of collective defect-environment interactions, which are critical factors in assessing the long-term performance of high-level nuclear waste forms

  19. Investigation of microscopic radiation damage in waste forms using ODNMR and AEM techniques. (EMSP Project Final Report)

    Energy Technology Data Exchange (ETDEWEB)

    Liu, G.; Luo, J.; Beitz, J.; Li, S.; Williams, C.; Zhorin, V.

    2000-04-21

    This project seeks to understand the microscopic effects of radiation damage in nuclear waste forms. The authors' approach to this challenge encompasses studies of ceramics and glasses containing short-lived alpha- and beta-emitting actinides with electron microscopy, laser and X-ray spectroscopic techniques, and computational modeling and simulations. In order to obtain information on long-term radiation effects on waste forms, much of the effort is to investigate {alpha}-decay induced microscopic damage in 18-year old samples of crystalline yttrium and lutetium orthophosphates that initially contained {approximately} 1(wt)% of the alpha-emitting isotope {sup 244}Cm (18.1 y half life). Studies also are conducted on borosilicate glasses that contain {sup 244}Cm, {sup 241}Am, or {sup 249}Bk, respectively. The authors attempt to gain clear insights into the properties of radiation-induced structure defects and the consequences of collective defect-environment interactions, which are critical factors in assessing the long-term performance of high-level nuclear waste forms.

  20. Comprehensive assessment of the efficiency of high-rise construction projects in the form of urban blocks

    Science.gov (United States)

    Orlov, Alexandr; Chubarkina, Irina

    2018-03-01

    The paper is dedicated to main modern trends in the area of high-rise construction. The classification of buildings and structures by height is given. Functional distribution by the height of buildings is presented. A review of positive and negative aspects of high-rise construction from the economic point of view is given. On the basis of the data obtained, it is proposed to build up residential microdistricts in the form of urban blocks. A plan of microdistricts development is presented. It takes into account urban blocks and includes their main characteristics. An economic and mathematical model was developed to carry out a comprehensive assessment of the effectiveness of high-rise construction projects.

  1. Modified three-pole VMD model with two-branch-point analytic structure and approved asymptotic behaviour for the pion electromagnetic form factor

    International Nuclear Information System (INIS)

    Dubnicka, S.; Furdik, I.; Meshcheryakov, V.A.

    1987-01-01

    A modification of three-pole VMD model for electromagnetic pion form factor was carried out, first by means of its transformation into the pion c.m. momentum variable and subsequently by using the inverse Zhukovsky transformation into another variable. In such a procedure a common normalized factor for all three vector mesons, ρ(770), ρ'(1250) and ρ''(1600), is singled out, by means of which it is possible to settle a specific freedom in the choice of the pion form factor asymptotic behaviour. An explicit incorporation of nonzero vector meson widths creates a real analytic model, defined on the four-sheeted Riemann surface. It includes inelastic contributions effectively, depends just on the parameters with a clear physical meaning, conserves the normalization of the original VMD parametrization, and provides a perfect fit of all existing pion form factor data, in which all parameters of the model are determined and the presence of ρ'(1250) in e + e - → π + π - is again established

  2. Supercollider: Footprint approved

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    With the 'footprint' - the precise location of the 87-kilometre US Superconducting Supercollider, SSC, and its ancillary buildings - now approved, teams of specialists commissioned by the State of Texas swing into action to procure the 17,000 acres (69 million square metres) of land covered by the project. With the SSC Laboratory in Ellis County and the US Department of Energy (DoE, the overseeing government agency) both hiring manpower for this project to collide 20 TeV (20,000 GeV) proton beams before the end of the century, the host State of Texas is providing a helping hand

  3. Dual projection of chiral p-forms in D = 2: The non-Abelian, PST and supersymmetric formulations of Hull's notons

    International Nuclear Information System (INIS)

    Abreu, E.M.C.

    2002-08-01

    Chiral p-forms are, in fact, present in many supersymmetric and supergravity models in two, six and ten dimensions. In this work, the dual projection procedure, which is essentially equivalent to a canonical transformation, is used to diagonalize some theories in D = 2 (0-forms). The dual projection performed here provides an alternative way of gauging the chiral components without the necessity of constraints. It is shown, through the dual projection, that the nonmover field (the noton) initially introduced by Hull to cancel out the Siegel anomaly, has non-Abelian, PST and supersymmetric formulations. (author)

  4. Community-led local development approach principles implementation when forming a regional local development projects support system in Ukraine

    Directory of Open Access Journals (Sweden)

    Y. G. Udod

    2017-03-01

    Full Text Available The article contains a brief description of the Community-led local development approach (local development under the leadership of the community, CLLD and the main purpose of its use in the European Union. The study indicated periods of the major initiatives to support local development in EU. Moreover the article posted CLLD approach principles’ evolution and the basic principles of the LEADER method and its application in CLLD, which can be applied in Ukraine. Subject to the provisions of the European Economic and Social Committee (EESC for further CLLD-approach distribution the five trends were identified that must be considered when forming a Regional local development projects support system in Ukraine: Multi-fund financing; Unification; Networking and collaboration; Extending the approach; Simplifying the process. The characteristic of the present phase of CLLD-approach, in particular, of the European Network for Rural Development (ENRD, which attaches great importance to the dissemination of the most effective CLLD practices and establish partnerships between communities and territories where the approach is implemented. The study found out the relationship between Community-led local development and Community-driven development (CDD supported by the World Bank.

  5. Succesful Experience of the Project "ASTROTOP" in Israel: Space-astonomy Science education in form of independent reserch projects of pupils

    Science.gov (United States)

    Pustil'Nik, Lev

    We present more then 10 year experience of educational project in Space/Astrophysics/Environment field, realized on the base of National Science- Educational Center "Blossoms of Science" of the Jordan Valley College. Our approach is based on the natural curiosity of children as driver of their self-development from the first minutes of their life and even in adult state. This approach shift center of the weight in educational process from direct lectures, sermons, explanation from teacher to children on own attempts of children to investigate problem, what is interesting for them, by themselves (individually or in group). Our approach includes four levels of the projects: "nano-projects" for children garden and basic school (up to 10-12 years), "micro-projects" for intermediate school (12-16 years), "mini-projects" for high school (16-18 years), and "macro-projects" for the best graduates high schools and students of colleges (17-22 years). These levels and projects are interconnected one with another and sometimes participants, started on the micro-projects level in intermediate school, continue their activity up to macro-projects of the graduate's diploma level. For each level we organize courses for preparation of the teachers and instructors, interested in the using of our receipts, and published books and brochures for them. The content of our activity for different levels: a) Level of kinder gardens/basic schools- special software with interactive movie -nano-projects; b) Level of intermediate school: "Days of Science" in tens schools of Israel- first contact with astronomy; c) Summer astronomy camps (4-5 of one week camps on 200-300 pupils from all country) with introduce to astronomy and with preparation of micro-projects on themes - first successful experience of research in real science fields (hundreds projects); d) ASTROTOP - one year program of preparation of short projects, with solution on the quality level of chosen astrophysical problem - mini-projects

  6. The First Billion Years project: constraining the dust attenuation law of star-forming galaxies at z ≃ 5

    Science.gov (United States)

    Cullen, F.; McLure, R. J.; Khochfar, S.; Dunlop, J. S.; Dalla Vecchia, C.

    2017-09-01

    We present the results of a study investigating the dust attenuation law at z ≃ 5, based on synthetic spectral energy distributions (SEDs) calculated for a sample of N = 498 galaxies drawn from the First Billion Years (FiBY) simulation project. The simulated galaxies at z ≃ 5, which have M1500 ≤ -18.0 and 7.5 ≤ log(M/M}_{⊙}) ≤ 10.2, display a mass-dependent α-enhancement, with a median value of [α /{Fe}]_{z=5} ˜eq 4 × [α /{Fe}]_{Z_{⊙}}. The median Fe/H ratio of the simulated galaxies is 0.14 ± 0.05 which produces steep intrinsic ultraviolet (UV) continuum slopes; 〈βI〉 = -2.4 ± 0.05. Using a set of simple dust attenuation models, in which the wavelength-dependent attenuation is assumed to be of the form A(λ) ∝ λn, we explore the parameter values which best reproduce the observed z = 5 luminosity function (LF) and colour-magnitude relation (CMR). We find that a simple model in which the absolute UV attenuation is a linearly increasing function of log stellar mass (A1500 = 0.5 × log(M/M⊙) - 3.3), and the dust attenuation slope (n) is within the range -0.7 ≤ n ≤ -0.3, can successfully reproduce the LF and CMR over a wide range of stellar population synthesis model assumptions, including the effects of massive binaries. This range of attenuation curves is consistent with a power-law fit to the Calzetti attenuation law in the UV (n = -0.55). In contrast, curves as steep as the Small Magellanic Cloud extinction curve (n = -1.24) are formally ruled out. Finally, we show that our models are consistent with recent 1.3 mm Atacama Large Millimeter Array observations of the Hubble Ultra Deep Field, and predict the form of the z ≃ 5 infrared excess (IRX)-β relation.

  7. The rate commitment to ISO 214 standard among the persian abstracts of approved research projects at school of health management and medical informatics, Isfahan University of Medical Sciences, Isfahan, Iran.

    Science.gov (United States)

    Papi, Ahmad; Khalaji, Davoud; Rizi, Hasan Ashrafi; Shabani, Ahmad; Hassanzadeh, Akbar

    2014-01-01

    Commitment to abstracting standards has a very significant role in information retrieval. The present research aimed to evaluate the rate of Commitment to ISO 214 Standard among the Persian abstracts of approved research projects at School of Health Management and Medical Informatics, Isfahan University of Medical Sciences, Isfahan, Iran. This descriptive study used a researcher-made checklist to collect data, which was then analyzed through content analysis. The studied population consisted of 227 approved research projects in the School of Health Management and Medical Informatics, Isfahan University of Medical Sciences during 2001-2010. The validity of the checklist was measured by face and content validity. Data was collected through direct observations. Statistical analyzes including descriptive (frequency distribution and percent) and inferential statistics (Chi-square test) were performed in SPSS-16. The highest and lowest commitment rates to ISO 214 standard were in using third person pronouns (100%) and using active verbs (34/4%), respectively. In addition, the highest commitment rates to ISO 214 standard (100%) related to mentioning third person pronouns, starting the abstract with a sentence to explain the subject of the research, abstract placement, and including keyword in 2009. On the other hand, during 2001-2003, the lowest commitment rate was observed in reporting research findings (16/7%). Moreover, various educational groups differed significantly only in commitment to study goals, providing research findings, and abstaining from using abbreviations, signs, and acronyms. Furthermore, educational level of the corresponding author was significantly related with extracting the keywords from the text. Other factors of ISO 214 standard did not have significant relations with the educational level of the corresponding author. In general, a desirable rate of commitment to ISO 214 standard was observed among the Persian abstracts of approved research

  8. Results of expert response when forming an exhaustive list of potential risks of constructions projects using energy efficient technologies

    Directory of Open Access Journals (Sweden)

    Ryzhkova Anastasiya Igorevna

    2016-10-01

    Full Text Available The author deals with the most widely used methods of risk events identification. The expert response method is most applicable for construction projects using energy efficient technologies. The article presents the results of an opinion poll of the professional expert community using expert response method, which is aimed to identify the most likely potential “pure” risk of construction projects with energy-efficient technologies in use. 74 experts representing different levels of the construction process were polled: customers and directors of construction companies, project managers, risk managers, advisors. The answers were collected during private talks and also using a special website Survey Monkey. Experts from different countries took part: Russia, Great Britain, Austria, Luxemburg, Switzerland and Norway. Also the article presents the expert evaluation of the “effect” of risk implementation on the cost of a project, implementation time, the product quality, the environment and safety on the construction site.

  9. Report and recommendations of the Pingston Hydroelectric Project Committee with respect to the issuance of a project approval certificate pursuant to the Environmental Assessment Act, R.S.B.C. 1966, c.119 and fulfilling the requirements for a screening report pursuant to the Canadian Environmental Assessment Act, 1992 c.37, V.1

    International Nuclear Information System (INIS)

    1999-05-01

    A final application was submitted in March 1998 by Canadian Hydro Developers (CHD) with the intent of obtaining a Project Approval certificate under the Act for development of the Project. The purpose of the project committee report is to summarize the application and project report, to describe the potential environmental, economic, social, cultural, heritage and health effects of the project and measures required to mitigate significant adverse effects and to document the recommendations of the committee. The Project is composed of five main parts including the headworks, tunnel, penstock, powerhouse and transmission line. The potential environmental effects of the Project relate mainly to fisheries resources including entrainment at the intake, instream flow needs downstream from the headworks, alteration of fish habitat, sedimentation, and blockage of fish passage. CHD expects to minimize these effects through facility design modifications, operational changes and monitoring programs as required. Other concerns such as alteration of creek temperature, generation of methyl mercury in reservoirs, greenhouse gas flux in reservoirs and total gas pressures have been examined in light of the Project's size and operational schenarios, and the proponent expects these effects to be of minor concern. The Project Committee concluded that the project, with successful implementation and compliance of mitigation and compensation strategies, is not expected to cause significant adverse effects

  10. The Main Tendencies in the Development of Startup Projects as a Form of Innovative-Creative Enterprises in the Ukrainian Computer Programming Market

    Directory of Open Access Journals (Sweden)

    Garafonova Olga I.

    2017-10-01

    Full Text Available The article is aimed at studying the main tendencies in the development of startup projects as a form of innovative-creative enterprises in the Ukrainian computer programming market. A definition of «innovative-creative enterprises» has been proposed, the main features of startups as a form of innovative-creative enterprises has been considered. The directions of development of the computer programming market were analyzed, considering the most significant future trends, products and services in the computer programming sector. An analysis of startups in the Ukrainian computer programming market, based on the volume of investments made, was carried out. A model for the development of startup projects as a form of innovative-creative enterprises has been designed. The unfamiliar promising spheres, wherein have not yet been launched startups in the Ukrainian computer programming market, have been indicated.

  11. Quality assurance plan for Final Waste Forms project in support of the development, demonstration, testing and evaluation efforts associated with the Oak Ridge reservation's LDR/FFCA compliance

    International Nuclear Information System (INIS)

    Gilliam, T.M.; Mattus, C.H.

    1994-07-01

    This quality assurance project plan specifies the data quality objectives for Phase I of the Final Waste Forms Project and defines specific measurements and processes required to achieve those objectives. Although the project is funded by the U.S. Department of Energy (DOE), the ultimate recipient of the results is the U.S. Environmental Protection Agency (EPA). Consequently, relevant quality assurance requirements from both organizations must be met. DOE emphasizes administrative structure to ensure quality; EPA's primary focus is the reproducibility of the generated data. The ten criteria of DOE Order 5700.6C are addressed in sections of this report, while the format used is that prescribed by EPA for quality assurance project plans

  12. Projectables

    DEFF Research Database (Denmark)

    Rasmussen, Troels A.; Merritt, Timothy R.

    2017-01-01

    CNC cutting machines have become essential tools for designers and architects enabling rapid prototyping, model-building and production of high quality components. Designers often cut from new materials, discarding the irregularly shaped remains. We introduce ProjecTables, a visual augmented...... reality system for interactive packing of model parts onto sheet materials. ProjecTables enables designers to (re)use scrap materials for CNC cutting that would have been previously thrown away, at the same time supporting aesthetic choices related to wood grain, avoiding surface blemishes, and other...... relevant material properties. We conducted evaluations of ProjecTables with design students from Aarhus School of Architecture, demonstrating that participants could quickly and easily place and orient model parts reducing material waste. Contextual interviews and ideation sessions led to a deeper...

  13. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 2. Commercial waste forms, packaging and projections for preconceptual repository design studies

    International Nuclear Information System (INIS)

    1978-04-01

    This volume, Y/OWI/TM-36/2, ''Commercial Waste Forms, Packaging and Projections for Preconceptual Repository Design Studies,'' is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-36, which supplements the ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-44. The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This volume contains the data base for waste forms, packages, and projections from the commercial waste defined by the Office of Waste Isolation in ''Nuclear Waste Projections and Source Term Data for FY 1977,'' Y/OWI/TM-34. Also, as an alternative data base for repository design and analysis, waste forms, packages, and projections for commercial waste defined by Battelle Pacific Northwest Laboratory (BPNL) have been included. This data base consists of a reference case for use in the alternative design study and a definition of combustible wastes for use in mine fire and hydrogen generation analyses

  14. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 2. Commercial waste forms, packaging and projections for preconceptual repository design studies

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-01

    This volume, Y/OWI/TM-36/2, ''Commercial Waste Forms, Packaging and Projections for Preconceptual Repository Design Studies,'' is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-36, which supplements the ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-44. The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This volume contains the data base for waste forms, packages, and projections from the commercial waste defined by the Office of Waste Isolation in ''Nuclear Waste Projections and Source Term Data for FY 1977,'' Y/OWI/TM-34. Also, as an alternative data base for repository design and analysis, waste forms, packages, and projections for commercial waste defined by Battelle Pacific Northwest Laboratory (BPNL) have been included. This data base consists of a reference case for use in the alternative design study and a definition of combustible wastes for use in mine fire and hydrogen generation analyses.

  15. Decree 190/997 Industry, Energy and Mining Ministry: it approve the project of the organize structure reformulation of the respective executant Units

    International Nuclear Information System (INIS)

    1997-01-01

    In Ordinance 190 are about the approval of the reformulate of the organizational structure of the parenthesis 08 Ministry of Industry Energy and Mining that it will be integrated by the following Units executory:001 General Direction of Secretary,002 National Direction of Industrias,004 National Direction of the Property Industrial,007 National Direction of Mining and Geology,008Direction of Energy,009 National Direction of Handicrafts,Small and Medium Enterprises,011 National Direction of Technology Nuclear,del Parenthesis 08. The strategic objective ,organizational structure, structure of positions of work installation ,plan settles down in the whole Ministry.Special stress it is made to the sub paragraph 011 National Direction of Nuclear Technology being established their strategic objective support substantive to the nouns that Units Executory,organizational structure activities remains in the unit in execution in charge of third, structural of positions of work installation ,plan and flowchart of the new structure [es

  16. Retroambiguus projections to the cutaneus trunci motoneurons may form a pathway in the central control of mating

    NARCIS (Netherlands)

    Gerrits, Peter O.; Vodde, Chris; Holstege, Gert

    Our laboratory has proposed that the nucleus retroambiguus (NRA) generates the specific motor performance displayed by female cats during mating and that it uses direct pathways to the motoneurons of the lower limb muscles involved in this activity. In the hamster a similar NRA-projection system

  17. 7 CFR 1703.121 - Approved purposes for grants.

    Science.gov (United States)

    2010-01-01

    ... Approved purposes for grants. For distance learning and telemedicine projects, grants shall finance only... studies relating to the establishment or expansion of the phase of the project that is being financed with... initial capital assets associated with the project. The following are approved grant purposes: (a...

  18. The method shaft projects integrator in the process of forming the teaching mode interdisciplinary performance at the initial stage

    Directory of Open Access Journals (Sweden)

    Beatriz Páez Rodríguez

    2010-06-01

    Full Text Available In this article is approached the practical viability of the method of projects for the contribution to the process of formation in the professional, pedagogic and interdisciplinary way of acting in the initial stage of the trainee teachers, which is inserted in the professional formation in the curricular and in the extracurricular field, so that the formation of the student be integral and inside the context.

  19. Comparing On-Campus and Distance Education assessment in the form of Project Organized Problem Based Learning (POPBL)

    DEFF Research Database (Denmark)

    Helbo, Jan; Borch, Ole

    2006-01-01

    This paper describes the first experiences in on-line assessment in the POPBL distance education: Master of Industrial Information technology (MII) at Aalborg University, Denmark (AAU). The accomplished assessment of some projects and some courses has been changed from a normal on-campus seminar...... activity to an on-line event. The modifications in roles for teacher, censor and student are reported and some recommendations and unsolved problems are identified....

  20. 3D phase-shifting fringe projection system on the basis of a tailored free-form mirror.

    Science.gov (United States)

    Zwick, Susanne; Heist, Stefan; Steinkopf, Ralf; Huber, Sandra; Krause, Sylvio; Bräuer-Burchardt, Christian; Kühmstedt, Peter; Notni, Gunther

    2013-05-10

    Phase-shifting fringe projection is an effective method to perform 3D shape measurements. Conventionally, fringe projection systems utilize a digital projector that images fringes into the measurement plane. The performance of such systems is limited to the visible spectral range, as most projectors experience technical limitations in UV or IR spectral ranges. However, for certain applications these spectral ranges are of special interest. We present a wideband fringe projector that has been developed on the basis of a picture generating beamshaping mirror. This mirror generates a sinusoidal fringe pattern in the measurement plane without any additional optical elements. Phase shifting is realized without any mechanical movement by a multichip LED. As the system is based on a single mirror, it is wavelength-independent in a wide spectral range and therefore applicable in UV and IR spectral ranges. We present the design and a realized setup of this fringe projection system and the characterization of the generated intensity distribution. Experimental results of 3D shape measurements are presented.

  1. Geothermal energy: an important but disregarded form of renewable energy; geological situation, projects and economy in Austria

    International Nuclear Information System (INIS)

    Walker-Hertkorn, S.

    2000-05-01

    This study deals with the topic geothermal energy. Although geothermal energy is an important energy sector within the area of the renewable energies, the European policy downgraded this important, promising energy sector in 1999. Normally, geothermal energy cannot be regarded as a renewable energy source because the heat content of the Earth, the gravitational heat, the source heat, frictional heat and the decay of radioactive isotopes in the further process of geologic history will eventually be exhausted. However, we are referring here to many millions of years. At the present time, geothermal energy can thus be regarded as an inexhaustible renewable energy source. This work is focused on the geothermal situation in Austria. For many people, the term 'geothermal energy' is associated with countries such as Iceland, Italy (Larderello) and New Zealand. However, in Austria there are also innovative projects in the geothermal energy sector that only very few people know about. Some of these trend-setting projects are presented here. Regarding the total situation in Austria, the geothermal potential is described specifically for the Calcareous Alpine nappe and the Vienna Basin. Furthermore, the first results concerning successful injection in Upper Austria and up to now unconsidered locations for geothermal energy plants are presented. This work attempts to present the attractiveness of geothermal energy projects to the public, thus emphasizing the importance of discussing it again on the political level. (author)

  2. Agreements and Discrepancies between FDA Reports and Journal Papers on Biologic Agents Approved for Rheumatoid Arthritis: A Meta-Research Project.

    Directory of Open Access Journals (Sweden)

    Gil Amarilyo

    Full Text Available Sponsors that seek to commercialize new drugs apply to the Food and Drug Administration (FDA which independently analyzes the raw data and reports the results on its website.This study sought to determine if there are differences between the FDA assessments and journal reports on biologic agents developed for the treatment of rheumatoid arthritis.Available data on FDA-approved drugs were extracted from the website, and a systematic literature search was conducted to identify matching studies in peer-reviewed medical journals. Outcome measures were the American College of Rheumatology response criteria ACR20 (efficacy and withdrawal due to adverse events (safety. As effect size odds ratios were estimated for each active trial arm vs. control arm (i.e. for both sources: FDA and journal report, followed by calculation of the ratios of the FDA and journal report odds ratios. A ratio of odds ratios not equal to 1 was categorized as a discrepancy.FDA reports were available for 8 of 9 FDA-approved biologic agents for rheumatoid arthritis; all identified trials (34 except one were published in peer-reviewed journals. Overall, discrepancies were noted for 20 of the 33 evaluated trials. Differences in the apparent benefit reporting were found in 39% (24/61 pairwise comparisons and in 11 cases these were statistically significant; the FDA report showed greater benefit than the journal publication in 15 comparisons and lesser benefit in 9. Differences in the reported harms were found in 51% (28/55 pairwise comparisons and were statistically significant in 5. The "signal" in FDA reports showed a less harmful effect than the journal publication in 17 comparisons whereas a more harmful effect in 11. The differences were attributed to differences in analytic approach, patient inclusion, rounding effect, and counting discrepancies. However, no differences were categorized as critical.There was no empirical evidence to suggest biased estimates between the two

  3. Application for approval of the Cold Lake Expansion Project: volume 2: environmental impact assessment: Part 1: biophysical and resource use assessment. Part 2: impact model descriptions

    International Nuclear Information System (INIS)

    Green, J.; Eccles, R.; Hegmann, G.; Morrison, L.; Salter, R.; van Egmond, T.; Vonk, P.; Ash, G.; Crowther, R.; Dance, T.; Edwards, W.; Veldman, W.

    1997-02-01

    An environmental assessment of the Cold Lake Expansion Project has been conducted to identify major issues of concern by public and government agencies, to determine means to eliminate or reduce those impacts, and to recommend any further efforts required to obtain missing information or monitor impacts. Volume 2 of the environmental impact assessment is divided into two parts. Part 1 (biophysical and resource use assessment) constitutes the primary environmental impact assessment document for the Cold Lake expansion project. It includes technical support documentation in regard to: (1) an assessment of noise impacts, (2) an assessment of greenhouse gas emissions, (3) a conceptual conservation and reclamation plan, (4) a historical resource impact assessment, and (5) a description of effects of oil spills on fish. Part 2 (impact model description) serves a reference document for part 1. It describes the approach taken in developing and assessing the impact models, discusses proposed methods for mitigation and management of residual impacts, and the recommended monitoring requirements for each of the major resource disciplines. The impact models describe the specific pathways through which impacts will occur as a result of interactions between project-related activities and important environmental components. 476 refs., 58 tabs., 23 figs

  4. The gel forming characteristics and the palatability of pasteurized and radiation processed egg magma in baked custard - a class project

    International Nuclear Information System (INIS)

    Van Wyk, S.; Verhoef, L.

    1991-01-01

    In a research project conducted by third-year students, baked custard was made from six different samples of frozen egg magma subjected to various treatments. The treatments were pasteurization and various radiation doses. A sample made from untreated fresh egg magma was added as a control sample. Various objective measurements were executed: penetrometer testing with the skin of the baked custard left intact, penetrometer testing with the skin of the baked custards removed, syneresis testing, and determination of the percentage sag of the baked custard. Sensory evaluation included comparing the color of the baked custards with a predetermined color sample, evaluating the texture by means of visual as well as oral evaluation methods, evaluating the consistency of the baked custards, and the general acceptability of the baked custards to a trained sensory panel. Objective evaluation detected little difference between the egg magma samples. Sensory evaluation also detected little difference between the samples. 11 refs., 4 tabs., 1 fig

  5. Redfield Energy Approval

    Science.gov (United States)

    This September 19, 2016 letter from EPA approves the petition from Poet Biorefining-Lake Crystal, regarding non-This October 27, 2016 letter from EPA approves the petition from Redfield Energy, LLC, regarding non-grandfathered ethanol produced

  6. Hyapproval : final handbook for approval of hydrogen refuelling stations

    NARCIS (Netherlands)

    Wurster, R.; Landinger, H.; Machens, C.; Allidières, L.; Molag, M.; Barron, J.; Reijalt, M.; Hill, H.J.

    2006-01-01

    HyApproval is an EC co-financed Specific Targeted Research Project (STREP) to develop a Handbook facilitating the approval of Hydrogen Refuelling Stations (HRS). The project, started in October 2005, will be performed over 24 months by a balanced partnership including 25 partners from industry, SMEs

  7. Louisiana SIP: LAC 33:III Ch. 14 Subchap B, 1431 to 1434--Conformity to State or Federal Implementation Plans of Transportation Plans, Programs, and Projects Developed, Funded, or Approved Under Title 23 U.S.C. or the Federal Transit Laws

    Science.gov (United States)

    Louisiana SIP: LAC 33:III Ch. 14 Subchap B, 1431 to 1434--Conformity to State or Federal Implementation Plans of Transportation Plans, Programs, and Projects Developed, Funded, or Approved Under Title 23 U.S.C. or the Federal Transit Laws

  8. FEASIBILITY COMPARISON OF AIRBORNE LASER SCANNING DATA AND 3D-POINT CLOUDS FORMED FROM UNMANNED AERIAL VEHICLE (UAV-BASED IMAGERY USED FOR 3D PROJECTING

    Directory of Open Access Journals (Sweden)

    I. I. Rilskiy

    2017-01-01

    Full Text Available New, innovative methods of aerial surveys have changed the approaches to information provision of projecting dramatically for the last 15 years. Nowadays there are at least two methods that claim to be the most efficient way for collecting geospatial data intended for projecting – the airborne laser scanning (LIDAR data and photogrammetrically processed unmanned aerial vehicle (UAV-based aerial imagery, forming 3D point clouds. But these materials are not identical to each other neither in precision, nor in completeness.Airborne laser scanning (LIDAR is normally being performed using manned aircrafts. LIDAR data are very precise, they allow us to achieve data about relief even overgrown with vegetation, or to collect laser reflections from wires, metal constructions and poles. UAV surveys are normally being performed using frame digital cameras (lightweight, full-frame, or mid-size. These cameras form images that are being processed using 3D photogrammetric software in automatic mode that allows one to generate 3D point cloud, which is used for building digital elevation models, surfaces, orthomosaics, etc.All these materials are traditionally being used for making maps and GIS data. LIDAR data have been popular in design work. Also there have been some attempts to use for the same purpose 3D-point clouds, formed by photogrammetric software from images acquired from UAVs.After comparison of the datasets from these two different types of surveying (surveys were made simultaneously on the same territory, it became possible to define some specific, typical for LIDAR or imagery-based 3D data. It can be mentioned that imagery-based 3D data (3D point clouds, formed in automatic mode using photogrammetry, are much worse than LIDAR data – both in terms of precision and completeness.The article highlights these differences and makes attempts at explaining the origin of these differences. 

  9. Estimating 4D-CBCT from prior information and extremely limited angle projections using structural PCA and weighted free-form deformation for lung radiotherapy.

    Science.gov (United States)

    Harris, Wendy; Zhang, You; Yin, Fang-Fang; Ren, Lei

    2017-03-01

    To investigate the feasibility of using structural-based principal component analysis (PCA) motion-modeling and weighted free-form deformation to estimate on-board 4D-CBCT using prior information and extremely limited angle projections for potential 4D target verification of lung radiotherapy. A technique for lung 4D-CBCT reconstruction has been previously developed using a deformation field map (DFM)-based strategy. In the previous method, each phase of the 4D-CBCT was generated by deforming a prior CT volume. The DFM was solved by a motion model extracted by a global PCA and free-form deformation (GMM-FD) technique, using a data fidelity constraint and deformation energy minimization. In this study, a new structural PCA method was developed to build a structural motion model (SMM) by accounting for potential relative motion pattern changes between different anatomical structures from simulation to treatment. The motion model extracted from planning 4DCT was divided into two structures: tumor and body excluding tumor, and the parameters of both structures were optimized together. Weighted free-form deformation (WFD) was employed afterwards to introduce flexibility in adjusting the weightings of different structures in the data fidelity constraint based on clinical interests. XCAT (computerized patient model) simulation with a 30 mm diameter lesion was simulated with various anatomical and respiratory changes from planning 4D-CT to on-board volume to evaluate the method. The estimation accuracy was evaluated by the volume percent difference (VPD)/center-of-mass-shift (COMS) between lesions in the estimated and "ground-truth" on-board 4D-CBCT. Different on-board projection acquisition scenarios and projection noise levels were simulated to investigate their effects on the estimation accuracy. The method was also evaluated against three lung patients. The SMM-WFD method achieved substantially better accuracy than the GMM-FD method for CBCT estimation using extremely

  10. SDN Project

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Rhett [Schweitzer Engineering Laboratories Inc, Pullman, WA (United States)

    2016-12-23

    The SDN Project completed on time and on budget and successfully accomplished 100% of the scope of work outlined in the original Statement of Project Objective (SOPO). The SDN Project formed an alliance between Ameren Corporation, University of Illinois Urbana- Champaign (UIUC), Pacific Northwest National Laboratories (PNNL), and Schweitzer Engineering Laboratories, Inc. (SEL). The objective of the SDN Project is to address Topic Area of Interest 2: Sustain critical energy delivery functions while responding to a cyber-intrusion under Funding Opportunity Announcement DE-FOA-0000797. The goal of the project is to design and commercially release technology that provides a method to sustain critical energy delivery functions during a cyber intrusion and to do this control system operators need the ability to quickly identify and isolate the affected network areas, and re-route critical information and control flows around. The objective of the SDN Project is to develop a Flow Controller that monitors, configures, and maintains the safe, reliable network traffic flows of all the local area networks (LANs) on a control system in the Energy sector. The SDN team identified the core attributes of a control system and produced an SDN flow controller that has the same core attributes enabling networks to be designed, configured and deployed that maximize the whitelisted, deny-bydefault and purpose built networks. This project researched, developed and commercially released technology that: Enables all field networks be to configured and monitored as if they are a single asset to be protected; Enables greatly improved and even precalculated response actions to reliability and cyber events; Supports pre-configured localized response actions tailored to provide resilience against failures and centralized response to cyber-attacks that improve network reliability and availability; Architecturally enables the right subject matter experts, who are usually the information

  11. Teaching Form as Form

    DEFF Research Database (Denmark)

    Keiding, Tina Bering

    2012-01-01

    understanding of form per se, or, to use an expression from this text, of form as form. This challenge can be reduced to one question: how can design teaching support students in achieving not only the ability to recognize and describe different form-related concepts in existing design (i.e. analytical...

  12. Approaches to facilitate institutional review board approval of multicenter research studies.

    Science.gov (United States)

    Marsolo, Keith

    2012-07-01

    Gaining Institutional Review Board (IRB) approval for a multicenter research study can be a lengthy and time-consuming process. It can increase the complexity of consent forms, decreasing patient understanding and lowering recruitment numbers. It also leads to increased costs through the duplication of effort. This paper examines some of the strategies used to streamline the IRB review process for multicenter studies and provides examples used by 2 existing multicenter comparative effectiveness research networks. A literature search was conducted to identify sources that described the challenges and potential strategies to facilitate multicenter IRB approval. The most promising avenues were identified and included in this review. Phone interviews were conducted with the Principal Investigators and Project Managers of 2 successful multicenter research networks to learn their "keys to success" and their lessons learned. Three strategies were identified that held the most promise: working with IRBs before submission, the use of central and/or federated IRBs, and the establishment of an umbrella protocol. Each of these strategies was used to some degree by the case study projects. Although the approaches documented here can help streamline the IRB approval process, they are not a "silver bullet." Because some of these approaches are still relatively new, empirical data are sparse. However, it is believed that they will significantly reduce the administrative burden of the project as a whole and lead to a decrease in the overall time to protocol approval.

  13. 77 FR 59335 - Approval and Promulgation of Implementation Plans; North Carolina: Approval of Rocky Mount Motor...

    Science.gov (United States)

    2012-09-27

    ... account for any future changes to the emission model, projection model and other input data. \\2\\ A safety... changes in the emissions model and vehicle miles traveled (VMT) projection model. EPA is approving this... Regional Office's official hours of business are Monday through Friday, 8:30 to 4:30, excluding federal...

  14. SE Capstone Project: Building Systems Engineering Education and Workforce Capacity

    Science.gov (United States)

    2012-04-01

    This project developed a system to improve fuel efficiency by means of regenerative braking . The team designed a simple system that allows "bolt-on...air traffic control, social networking, credit/debit cards, and anti-lock brakes are only a few functions enabled by complex systems of systems . We...Building Systems Engineering Education and Workforce Capacity SE Capstone Project APRIL 2012 Report Documentation Page Form ApprovedOMB No. 0704

  15. THE MODEL OF EXPERT SYSTEM FOR SCIENTIFIC PROJECTS EVALUATION IN HIGHER EDUCATIONAL INSTITUTIONS

    Directory of Open Access Journals (Sweden)

    Олександр Михайлович ВОЗНИЙ

    2015-05-01

    Full Text Available There have been proposed the model of the expert system for the assessment of research projects in higher educational institutions, based on estimates of probability. It allows to rank alternative projects and scenarios. The model is implemented through the software "Small expert system." The principle of calculating the probability of approval of research projects, which form the basis of the expert system, is based on Bayes' theorem. Expert system calculates the probability of approval of research projects by Ministry of Science and Education on the basis of the responses to questions about the content of the request for the execution of research projects. Questions are formed on the basis of the criteria by which experts of state authorities evaluate scientific research projects.

  16. Measurement of the angle formed between the thalamostriate vein and internal cerebral vein in anteroposterior projection: A method of estimating the size of the lateral ventricle

    International Nuclear Information System (INIS)

    Choi, Il Soon; Yoo, Ho Joon; Kim, Myung Sung; Park, Kwang Joo

    1974-01-01

    The size and shape of the lateral ventricle are frequently altered by intracranial lesions, and this may be reflected on cerebral angiogram. The size and dilatation of the lateral ventricle may be estimate by the course of the thalamostirate vein (TSV) and the distance between the midline and the TSV in frontal projection, the course of the pericallosal artery and the distance between the venous angle and subependymal veins in lateral projection. However, little description can be found in the literature about the method of expressing the size and degree of dilatation of the lateral ventricle on cerebral angiogram. The authors have attempted to find out an easy way of precisely estimating the size of the lateral ventricle and to observe how it can be applied in the patients with various expanding intracranial lesions. We measured the angle formed between the internal cerebral vein (ICV) and the TSV in the anteroposterior roentgenograms of venous phase in normal group composed of 61 patients in whom no significant abnormality could be detected neurologically or by other methods, and in 18 patients with expanding intracranial lesions. The results obtained are as follows: 1. In the normal group, the average angle formed between the ICV and TSV on the anteroposterior angiogram obtained with the central beam projected making an angle of 10 to 15 .deg with the orbitomeatal line was 25.7 ± 3.9 .deg, ranging from 19 to 34 .deg. The angle measured from 20 to 30 in 85% of the normal group. There was no significant difference between the male and the female as well as between the children and adults. 2. The measurement of the angle was found to reflect faithfully the size of the lateral ventricle on the side examined, increasing as the lateral ventricle dilated. When the angle measures more than 33.deg. the lateral ventricle would certainly be dilated. The lateral ventricle can be taken as moderately dilated when the measurement exceeds 40.deg and as severely dilated when

  17. Contributor Form

    Directory of Open Access Journals (Sweden)

    Chief Editor

    2014-09-01

    to produce preprints or reprints and translate into languages other than English for sale or free distribution; and 4 the right to republish the work in a collection of articles in any other mechanical or electronic format. We give the rights to the corresponding author to make necessary changes as per the request of the journal, do the rest of the correspondence on our behalf and he/she will act as the guarantor for the manuscript on our behalf. All persons who have made substantial contributions to the work reported in the manuscript, but who are not contributors, are named in the Acknowledgment and have given me/us their written permission to be named. If I/we do not include an Acknowledgment that means I/we have not received substantial contributions from non-contributors and no contributor has been omitted.S NoAuthors' NamesContribution (IJCME Guidelines{1 substantial contributions to conception and design, acquisition of data, or analysis and interpretation of data; 2 drafting the article or revising it critically for important intellectual content; and 3 final approval of the version to be published. Authors should meet conditions 1, 2, and 3}.SignatureDate                              Note: All the authors are required to sign independently in this form in the sequence given above. In case an author has left the institution/country and whose whereabouts are not known, the senior author may sign on his/her behalf taking the responsibility.No addition/deletion/ or any change in the sequence of the authorship will be permissible at a later stage, without valid reasons and permission of the Editor.If the authorship is contested at any stage, the article will be either returned or will not be processed for publication till the issue is solved.Maximum up to 4 authors for short communication and up to 6 authors for original article.

  18. Contributors Form

    Directory of Open Access Journals (Sweden)

    Chief Editor

    2016-06-01

    to produce preprints or reprints and translate into languages other than English for sale or free distribution; and 4 the right to republish the work in a collection of articles in any other mechanical or electronic format. We give the rights to the corresponding author to make necessary changes as per the request of the journal, do the rest of the correspondence on our behalf and he/she will act as the guarantor for the manuscript on our behalf. All persons who have made substantial contributions to the work reported in the manuscript, but who are not contributors, are named in the Acknowledgment and have given me/us their written permission to be named. If I/we do not include an Acknowledgment that means I/we have not received substantial contributions from non-contributors and no contributor has been omitted.S NoAuthors' NamesContribution (IJCME Guidelines{1 substantial contributions to conception and design, acquisition of data, or analysis and interpretation of data; 2 drafting the article or revising it critically for important intellectual content; and 3 final approval of the version to be published. Authors should meet conditions 1, 2, and 3}.SignatureDate                              Note: All the authors are required to sign independently in this form in the sequence given above. In case an author has left the institution/country and whose whereabouts are not known, the senior author may sign on his/her behalf taking the responsibility.No addition/deletion/ or any change in the sequence of the authorship will be permissible at a later stage, without valid reasons and permission of the Editor.If the authorship is contested at any stage, the article will be either returned or will not be processed for publication till the issue is solved.Maximum up to 4 authors for short communication and up to 6 authors for original article.

  19. Drugs Approved for Thyroid Cancer

    Science.gov (United States)

    ... Ask about Your Treatment Research Drugs Approved for Thyroid Cancer This page lists cancer drugs approved by the ... that are not listed here. Drugs Approved for Thyroid Cancer Cabozantinib-S-Malate Caprelsa (Vandetanib) Cometriq (Cabozantinib-S-Malate) Doxorubicin ...

  20. Drugs Approved for Breast Cancer

    Science.gov (United States)

    ... Ask about Your Treatment Research Drugs Approved for Breast Cancer This page lists cancer drugs approved by the ... are not listed here. Drugs Approved to Prevent Breast Cancer Evista (Raloxifene Hydrochloride) Raloxifene Hydrochloride Tamoxifen Citrate Drugs ...

  1. Electronic Capitalization Asset Form -

    Data.gov (United States)

    Department of Transportation — National Automated Capitalization Authorization Form used by ATO Engineering Services, Logistics, Accounting for the purpose of identifying and capturing FAA project...

  2. Waste Feed Delivery Environmental Permits and Approvals Plan

    Energy Technology Data Exchange (ETDEWEB)

    TOLLEFSON, K.S.

    2000-01-18

    This plan describes the environmental permits approvals, and other requirements that may affect establishment of a waste feed delivery system for the Hanford Site's River Protection Project. This plan identifies and screens environmental standards for potential applicability, outlines alternatives for satisfying applicable standards, and describes preferred permitting and approval approaches.

  3. Waste Feed Delivery Environmental Permits and Approvals Plan

    International Nuclear Information System (INIS)

    TOLLEFSON, K.S.

    2000-01-01

    This plan describes the environmental permits approvals, and other requirements that may affect establishment of a waste feed delivery system for the Hanford Site's River Protection Project. This plan identifies and screens environmental standards for potential applicability, outlines alternatives for satisfying applicable standards, and describes preferred permitting and approval approaches

  4. Naming Conventions for the Large Hadron Collider Project

    CERN Document Server

    Faugeras, Paul E

    1997-01-01

    This report gives the procedures for defining standard abbreviations for the various machine components of the Large Hadron Collider (LHC) Project, as well as for the surface buildings and the underground Civil Engineering works of the LHC. The contents of this report has been approved by the LHC Project Leader and is published in the form of a Project Report in order to allow its immediate implementation. It will be incorporated later in the Quality Assurance Plan of the LHC Project which is under preparation.

  5. Poet Marion Approval

    Science.gov (United States)

    This update August 9, 2016 letter from EPA approves, with modifications, the petition from Poet Biorefining-North Manchester, LLC, regarding non-grandfathered ethanol produced through a dry mill process, qualifying under the Clean Air Act for renewable

  6. Poet Portland Approval

    Science.gov (United States)

    This update August 9, 2016 letter from EPA approves the petition, with modifications, from Poet Biorefining-Portland, LLC, regarding non-grandfathered ethanol produced through a dry mill process, qualifying under the Clean Air Act for renewable fuel

  7. Poet North Manchester Approval

    Science.gov (United States)

    This update August 9, 2016 letter from EPA approves, with modifications, the petition from Poet Biorefining-North Manchester, LLC, regarding non-grandfathered ethanol produced through a dry mill process, qualifying under the Clean Air Act for renewable

  8. Poet Alexandria Approval

    Science.gov (United States)

    This update August 9, 2016 letter from EPA approves, with modifications, the petition from Poet Biorefining-Alexandria, LLC, regarding non-grandfathered ethanol produced through a dry mill process, qualifying under the Clean Air Act for renewable fuel

  9. Poet Laddonia Approval

    Science.gov (United States)

    This update Auugust 9, 2016 letter from EPA approves with modifications, the petition from Poet Biorefining Laddonia, Poet Laddonia Facility, regarding non-grandfathered ethanol produced through a dry mill process, qualifying under the Clean Air Act f

  10. Drugs Approved for Neuroblastoma

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for neuroblastoma. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  11. Drugs Approved for Leukemia

    Science.gov (United States)

    This page lists cancer drugs approved by the FDA for use in leukemia. The drug names link to NCI's Cancer Drug Information summaries. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters.

  12. Drugs Approved for Retinoblastoma

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for retinoblastoma. The list includes generic names and brand names. The drug names link to NCI’s Cancer Drug Information summaries.

  13. Premarket Approvals (PMA)

    Data.gov (United States)

    U.S. Department of Health & Human Services — Premarket approval by FDA is the required process of scientific review to ensure the safety and effectiveness of all devices classified as Class III devices. An...

  14. 34 CFR 668.144 - Application for test approval.

    Science.gov (United States)

    2010-07-01

    ... quantitative skills; (9) If a test has been revised from the most recent edition approved by the Secretary, an... Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY... inquiries; (3) Each edition and form of the test for which the publisher requests approval; (4) The...

  15. Vedolizumab: first global approval.

    Science.gov (United States)

    Poole, Raewyn M

    2014-07-01

    Vedolizumab [Entyvio(®) (US, Europe)], a humanized monoclonal antibody α4β7 integrin receptor antagonist, has been developed by Millennium Pharmaceuticals (d/b/a Takeda Pharmaceuticals International) for the treatment of ulcerative colitis and Crohn's disease. Vedolizumab has received its first global approval for the treatment of ulcerative colitis and Crohn's disease in the US, for use in adult patients with moderate-to-severe disease who have had an inadequate response, loss of response or intolerance to one or more standard therapies (corticosteroids, immunomodulators or tumour necrosis factor-α inhibitor) or demonstrated dependence on corticosteroids. Vedolizumab has since been approved for ulcerative colitis and Crohn's disease in the EU, Norway, Iceland and Liechtenstein. This article summarizes the milestones in the development of vedolizumab leading to its first approval for the treatment of ulcerative colitis and Crohn's disease.

  16. CORN, LP Goldfield Approval

    Science.gov (United States)

    This November 19, 2015 letter from EPA approves the petition from CORN, LP, Goldfield facility, regarding non-grandfathered ethanol produced through a dry mill process, qualifying under the Clean Air Act for renewable fuel (D-code 6) RINs under the RFS pro

  17. Poet Fostoria Approval

    Science.gov (United States)

    This August 9, 2016 letter from EPA approves, with modifications, the petition from Poet Biorefining-Fostoria, LLC, regarding non-grandfathered ethanol produced through a dry mill process, qualifying under the Clean Air Act for renewable fuel (D-code 6)

  18. Poet Lake Crystal Approval

    Science.gov (United States)

    This September 19, 2016 letter from EPA approves the petition from Poet Biorefining-Lake Crystal, regarding non-grandfathered ethanol produced through a dry mill process, qualifying under the Clean Air Act for renewable fuel (D-code 6) RINs under the RFS

  19. Poet Leipsic Approval

    Science.gov (United States)

    This August 9, 2016 letter from EPA approves,wtih modifications, the petition from Poet Biorefining-Leipsic, LLC, regarding non-grandfathered ethanol produced through a dry mill process, qualifying under the Clean Air Act for renewable fuel (D-code 6) RINs

  20. Drugs Approved for Rhabdomyosarcoma

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for rhabdomyosarcoma. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries. There may be drugs used in rhabdomyosarcoma that are not listed here.

  1. 75 FR 57019 - Pesticide Product Registrations; Conditional Approval

    Science.gov (United States)

    2010-09-17

    ..., the Agency was able to make basic health and safety determinations which show that use of flutriafol... unreasonable adverse effects to man and the environment. III. Conditional Approval Form EPA issued a notice...

  2. Uganda cabinet approves policy initiated by IDRC grantee | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-06-28

    Jun 28, 2016 ... The Economic Policy Research Centre (EPRC), an IDRC grantee under the ... on May 4, 2016, with cabinet approval of their National Fertilizer Policy. ... that 20% of the country's population has some form of physical disability.

  3. Innovating by developing new uses of already-approved drugs: trends in the marketing approval of supplemental indications.

    Science.gov (United States)

    DiMasi, Joseph A

    2013-06-01

    Much of the literature on trends and factors affecting biopharmaceutical innovation has focused overwhelmingly on the development and approval of never-before approved drugs and biologics. Little attention has been paid to new uses for already-approved compounds, which can be an important form of innovation. This paper aimed to determine and analyze recent trends in the number and type of new or modified US indication approvals for drugs and biologics. We also examine regulatory approval-phase times for new-use efficacy supplements and compare them to approval-phase times for original-use approvals over the same period. We developed a data set of efficacy supplements approved by the US Food and Drug Administration (FDA) from 1998 to 2011 that includes information on the type, approval-phase time (time from submission to the FDA of an application for marketing approval to approval of the application), and FDA therapeutic-significance rating for the approved application, which we obtained from an FDA Web site. This data set was merged with a Tufts Center for the Study of Drug Development (CSDD) data set of US new drug and biologics approvals. We developed descriptive statistics on trends in the number and type of new-use efficacy supplements, on US regulatory approval-phase times for the supplements, and on original new drug and biologics approvals over the study period and for the time from original- to new-use approval. The total number of new-use efficacy-supplement approvals did not exhibit a marked trend, but the number of new pediatric-indication approvals increased substantially. Approval-phase times for new-use supplements varied by therapeutic class and FDA therapeutic-significance rating. Mean approval-phase times were highest for central nervous system compounds (13.8 months) and lowest for antineoplastics (8.9 months). The mean time from original to supplement approval was substantially longer for new pediatric indications than for other new uses. Mean

  4. Bill authorizing the approval of the additional protocol to the construction agreement between the French government and the International organization of fusion energy for the joint implementation of the ITER project, and relative to the role of the labour inspection on the ITER international organization site and dealing with occupational health and safety

    International Nuclear Information System (INIS)

    2009-10-01

    The aim of the additional protocol to the construction agreement between the French Government and the ITER Organization is to allow the French labour inspection services to control the good respect of the French occupational health and safety regulation at the project site (Cadarache, Bouches du Rhone) and to play its role of adviser to the persons responsible for the organization. This bill gives permission to the approval of this additional protocol. It allows the labour inspectors to do their job on the ITER site. (J.S.)

  5. Quality assurance plan for Final Waste Forms project in support of the development, demonstration, testing and evaluation efforts associated with the Oak Ridge reservation`s LDR/FFCA compliance

    Energy Technology Data Exchange (ETDEWEB)

    Gilliam, T.M.; Mattus, C.H.

    1994-07-01

    This quality assurance project plan specifies the data quality objectives for Phase I of the Final Waste Forms Project and defines specific measurements and processes required to achieve those objectives. Although the project is funded by the U.S. Department of Energy (DOE), the ultimate recipient of the results is the U.S. Environmental Protection Agency (EPA). Consequently, relevant quality assurance requirements from both organizations must be met. DOE emphasizes administrative structure to ensure quality; EPA`s primary focus is the reproducibility of the generated data. The ten criteria of DOE Order 5700.6C are addressed in sections of this report, while the format used is that prescribed by EPA for quality assurance project plans.

  6. Report made on behalf of the commission of foreign affairs about the project of law, adopted by the Senate, giving permission to the approval of the agreement between the French government and the international organization for thermonuclear fusion energy ITER, relative to the head office of ITER organization and to the privileges and immunities of ITER organization in the French territory

    International Nuclear Information System (INIS)

    2008-02-01

    The will of building up an international thermonuclear experimental reactor (ITER) gathers since several years the European community of atomic energy (Euratom), Japan, the USA, and Russia, next followed by China, South Korea and, since 2005, by India. The agreement signed in Paris between these seven parties on November 21, 2006 entrusted the international organization ITER with the realization of this project. The implications of the ITER project are enormous both in their scientific and in their economical aspects. France has a particular position in this project since the head office of ITER organisation is sited at Saint-Paul-lez-Durance and the tokamak will be built at Cadarache. Therefore, an agreement has been signed between ITER organization and the French government. The approval of this agreement is the object of this project of law. The document presents first the principle, challenge and stakes of the ITER project and the long negotiations that have led to chose France for the setting up of the research facility. Then, it presents the agreement of November 7, 2007, which fixes the general framework of the conditions necessary to the achievement of the project. The agreement comprises the classical rules, privileges and immunities of any international organization sited on the French ground, plus some more specific dispositions in particular in the domain of management of the wastes generated by the facility. (J.S.)

  7. Expedited technology demonstration project (Revised mixed waste management facility project) Project baseline revision 4.0 and FY98 plan

    International Nuclear Information System (INIS)

    Adamson, M. G.

    1997-01-01

    The re-baseline of the Expedited Technology Demonstration Project (Revised Mixed Waste Facility Project) is designated as Project Baseline Revision 4.0. The last approved baseline was identified as Project Baseline Revision 3.0 and was issued in October 1996. Project Baseline Revision 4.0 does not depart from the formal DOE guidance followed by, and contained in, Revision 3.0. This revised baseline document describes the MSO and Final Forms testing activities that will occur during FY98, the final year of the ETD Project. The cost estimate for work during FY98 continues to be $2.OM as published in Revision 3.0. However, the funds will be all CENRTC rather than the OPEX/CENTRC split previously anticipated. LLNL has waived overhead charges on ETD Project CENRTC funds since the beginning of project activities. By requesting the $2.OM as all CENTRC a more aggressive approach to staffing and testing can be taken. Due to a cost under- run condition during FY97 procurements were made and work was accomplished, with the knowledge of DOE, in the Feed Preparation and Final Forms areas that were not in the scope of Revision 3.0. Feed preparation activities for FY98 have been expanded to include the drum opening station/enclosure previously deleted

  8. 75 FR 51161 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2010-08-18

    .... Brief Description of Withdrawn Projects: Blast barrier. Land acquisition. Access control. Electrical.... Preliminary engineering, access road security fence. Construct perimeter access road. Security related... the total annual enplanements at Jack McNamara Field. Brief Description of Projects Approved for...

  9. 18 CFR 806.6 - Transfer of approvals.

    Science.gov (United States)

    2010-04-01

    ... change of ownership as a result of a corporate reorganization of the following types: (i) Where property... corporation. (ii) Where the corporation reorganization is merely a result of a change of the name, identity... and approval, to a new project sponsor upon a change of ownership of the project, subject to the...

  10. Linaclotide: first global approval.

    Science.gov (United States)

    McWilliams, Vanessa; Whiteside, Glenn; McKeage, Kate

    2012-11-12

    Linaclotide is a once-daily, orally administered, first-in-class agonist of guanylate cyclase-C that is minimally absorbed. It is being developed to treat gastrointestinal disorders by Ironwood Pharmaceuticals and its partners, Forest Laboratories (North America), Almirall (Europe) and Astellas Pharma (Asia-Pacific). Linaclotide has received its first global approval in the US for the treatment of constipation-predominant irritable bowel syndrome (IBS-C) and chronic idiopathic constipation (CIC), and a marketing submission has been filed in the EU for IBS-C. This article summarizes the milestones in the development of linaclotide leading to this first approval for IBS-C and CIC. This profile has been extracted and modified from the Adis R&D Insight drug pipeline database. Adis R&D Insight tracks drug development worldwide through the entire development process, from discovery, through pre-clinical and clinical studies to market launch.

  11. Neratinib: First Global Approval.

    Science.gov (United States)

    Deeks, Emma D

    2017-10-01

    Neratinib (Nerlynx™) is an oral, irreversible inhibitor of the human epidermal growth factor receptors HER1 (EGFR), HER2 and HER4. The drug originally arose from research by Wyeth (now Pfizer) and is now being developed by Puma Biotechnology primarily for the treatment of HER2-positive (HER+) breast cancer. Neratinib is approved in the USA for the extended adjuvant treatment of patients with HER2+ early-stage breast cancer who have been previously treated with a trastuzumab-based adjuvant regimen, and is in the preregistration phase for this indication in the EU. Neratinib, as monotherapy and/or combination therapy, is also in phase 3 development for metastatic breast cancer and in phase 1/2 development for advanced breast cancer and other solid tumours, including non-small cell lung cancer, colorectal cancer and glioblastoma. This article summarizes the milestones in the development of neratinib leading to this first approval for breast cancer.

  12. Avelumab: First Global Approval.

    Science.gov (United States)

    Kim, Esther S

    2017-05-01

    Avelumab (Bavencio ® ) is an intravenously administered programmed cell death ligand-1-blocking human antibody initially developed by EMD Serono Inc. (the biopharmaceutical division of Merck KGaA, Darmstadt, Germany) [now jointly developed and commercialized by EMD Serono Inc. and Pfizer] for the treatment of various tumours. It has received accelerated approval in the USA for the treatment of metastatic Merkel cell carcinoma (mMCC) in adults and paediatric patients aged ≥12 years. The marketing authorization application for avelumab in the treatment of mMCC is undergoing regulatory review in the EU, the biologics license application for avelumab in the treatment of urothelial carcinoma is undergoing priority review by the FDA, and avelumab is in various stages of development internationally for a variety of cancers. This article summarizes the milestones in the development of avelumab leading to this first approval for mMCC.

  13. Comparison of the Effectiveness of Two Forms of the Enhancing Relationships in School Communities Project for Promoting Cooperative Conflict Resolution Education in Australian Primary Schools

    Science.gov (United States)

    Trinder, Margot; Wertheim, Eleanor H.; Freeman, Elizabeth; Sanson, Ann; Richardson, Shanel; Hunt, Sue

    2010-01-01

    This study evaluated the Enhancing Relationships in School Communities (ERIS) Project which aimed to promote constructive conflict resolution (CR) in Australian primary school communities through professional development for core teams of three-five staff (n = 33 teachers). Twelve schools were randomly assigned to a full intervention (FI) group or…

  14. Criteria for approving equipment for continued operation

    International Nuclear Information System (INIS)

    Narayanan, T.V.

    1993-01-01

    In May 1988, the Pressure Vessel Research Committee (PVRC) of the Welding Research Council (WRC) initiated four projects in support of ASME's efforts to develop Codes and Standards for life prediction and life extension of nuclear and fossil power plant components. These projects are: (1) Criteria for Approving Equipment for Continued Operation (2) Guidelines and Procedures for Evaluating Piping for Continued Operation (3) Nondestructive Evaluation of Material Degradation (4) Operation and Maintenance History and Life Cycle Management. The PVRC awarded a contract to Foster Wheeler Development Corporation to undertake the first of these projects. The specific objective was to develop a program plan that will lead to development of ''Criteria for Approving Equipment for Continued Operation.'' The program is divided into the following four tasks: Task 1: Literature Search; Task 2: Telephone Interview and Consultation; Task 3: Program Plan Development; Task 4: Preparation of a Summary Report. This report is in fulfillment of the above project. As part of this study, the author reviewed about 145 reports, papers and books relating to various aspects of life extension. Various experts were also consulted who are involved in EPRI, NRC, ASME, PVRC, MPC, and utility studies as well as other research projects. The conclusions and recommendations for Code-related activities are summarized

  15. 7 CFR 4290.470 - Prior approval of merger, consolidation, or reorganization of RBIC.

    Science.gov (United States)

    2010-01-01

    ... merge, consolidate, change form of organization (corporation, limited liability company, or limited partnership) or reorganize without the Secretary's prior written approval. Any such merger, consolidation, or...

  16. Research Report: Neue Formen der gesellschaftlichen Kommunikation von Wissen – Ein videografisches Projekt [New Social Forms of Knowledge Communication─A Videographic Project

    Directory of Open Access Journals (Sweden)

    Roman Pernack

    2008-11-01

    Full Text Available Hardly any conference talks are given without illustrative picture, tables and graphics. The entire conference culture has changed as a result of Powerpoint and similar programs. The talk has become the presentation. The body of the speaker plays an important role in communicating the content to an audience. To examine this new phenomenon of conference culture a video camera was used as an instrument of data collection in a project (http://www2.tu-berlin.de/~soziologie/AllgSoz/projekt/index2.htm supported by the German Research Foundation (Deutsche Forschungsgemeinschaft, DFG. Video analysis can be highly beneficial when examining the corporeality of interactive events. The film (2008, German/English, 15 min, Stereo 3:4, PAL introduces the method of videography and thereby shows some results of the research project. URN: urn:nbn:de:0114-fqs0803P16

  17. Formation of the portfolio of high-rise construction projects on the basis of optimization of «risk-return» rate

    OpenAIRE

    Uvarova Svetlana; Kutsygina Olga; Smorodina Elena; Gumba Khuta

    2018-01-01

    The effectiveness and sustainability of an enterprise are based on the effectiveness and sustainability of its portfolio of projects. When creating a production program for a construction company based on a portfolio of projects and related to the planning and implementation of initiated organizational and economic changes, the problem of finding the optimal "risk-return" ratio of the program (portfolio of projects) is solved. The article proposes and approves the methodology of forming a por...

  18. Decontamination systems information and research program -- Literature review in support of development of standard test protocols and barrier design models for in situ formed barriers project

    International Nuclear Information System (INIS)

    1994-12-01

    The US Department of Energy is responsible for approximately 3,000 sites in which contaminants such as carbon tetrachloride, trichlorethylene, perchlorethylene, non-volatile and soluble organic and insoluble organics (PCBs and pesticides) are encountered. In specific areas of these sites radioactive contaminants are stored in underground storage tanks which were originally designed and constructed with a 30-year projected life. Many of these tanks are now 10 years beyond the design life and failures have occurred allowing the basic liquids (ph of 8 to 9) to leak into the unconsolidated soils below. Nearly one half of the storage tanks located at the Hanford Washington Reservation are suspected of leaking and contaminating the soils beneath them. The Hanford site is located in a semi-arid climate region with rainfall of less than 6 inches annually, and studies have indicated that very little of this water finds its way to the groundwater to move the water down gradient toward the Columbia River. This provides the government with time to develop a barrier system to prevent further contamination of the groundwater, and to develop and test remediation systems to stabilize or remove the contaminant materials. In parallel to remediation efforts, confinement and containment technologies are needed to retard or prevent the advancement of contamination plumes through the environment until the implementation of remediation technology efforts are completed. This project examines the various confinement and containment technologies and protocols for testing the materials in relation to their function in-situ

  19. Project of law, adopted by the Senate, giving permission to the approval of the agreement between the French government and the international organization for thermonuclear fusion energy ITER, relative to the head office of ITER organization and to the privileges and immunities of ITER organization in the French territory

    International Nuclear Information System (INIS)

    2008-01-01

    The will of building up an international thermonuclear experimental reactor (ITER) gathers since several years the European community of atomic energy (Euratom), Japan, the USA, and Russia, next followed by China, South Korea and, since 2005, by India. The agreement signed in Paris between these seven parties on November 21, 2006 entrusted the international organization ITER with the realization of this project. The implications of the ITER project are enormous both in their scientific and in their economical aspects. France has a particular position in this project since the head office of ITER organisation is sited at Saint-Paul-lez-Durance and the tokamak will be built at Cadarache. Therefore, an agreement has been signed between ITER organization and the French government. The approval of this agreement is the object of this project of law made of a single article. The agreement between the French government and the international organization ITER is attached to the document. It defines the juridical status, the privileges and immunities of the organization itself and of its personnel inside the French territory. An appendix to the agreement precises the cooperation modalities between the French authorities and ITER organization. (J.S.)

  20. Standardized waste form test methods

    International Nuclear Information System (INIS)

    Slate, S.C.

    1984-11-01

    The Materials Characterization Center (MCC) is developing standard tests to characterize nuclear waste forms. Development of the first thirteen tests was originally initiated to provide data to compare different high-level waste (HLW) forms and to characterize their basic performance. The current status of the first thirteen MCC tests and some sample test results is presented: The radiation stability tests (MCC-6 and 12) and the tensile-strength test (MCC-11) are approved; the static leach tests (MCC-1, 2, and 3) are being reviewed for full approval; the thermal stability (MCC-7) and microstructure evaluation (MCC-13) methods are being considered for the first time; and the flowing leach tests methods (MCC-4 and 5), the gas generation methods (MCC-8 and 9), and the brittle fracture method (MCC-10) are indefinitely delayed. Sample static leach test data on the ARM-1 approved reference material are presented. Established tests and proposed new tests will be used to meet new testing needs. For waste form production, tests on stability and composition measurement are needed to provide data to ensure waste form quality. In transportation, data are needed to evaluate the effects of accidents on canisterized waste forms. The new MCC-15 accident test method and some data are presented. Compliance testing needs required by the recent draft repository waste acceptance specifications are described. These specifications will control waste form contents, processing, and performance. 2 references, 2 figures

  1. Standardized waste form test methods

    International Nuclear Information System (INIS)

    Slate, S.C.

    1984-01-01

    The Materials Characterization Center (MCC) is developing standard tests to characterize nuclear waste forms. Development of the first thirteen tests was originally initiated to provide data to compare different high-level waste (HLW) forms and to characterize their basic performance. The current status of the first thirteen MCC tests and some sample test results are presented: the radiation stability tests (MCC-6 and 12) and the tensile-strength test (MCC-11) are approved; the static leach tests (MCC-1, 2, and 3) are being reviewed for full approval; the thermal stability (MCC-7) and microstructure evaluation (MCC-13) methods are being considered for the first time; and the flowing leach test methods (MCC-4 and 5), the gas generation methods (MCC-8 and 9), and the brittle fracture method (MCC-10) are indefinitely delayed. Sample static leach test data on the ARM-1 approved reference material are presented. Established tests and proposed new tests will be used to meet new testing needs. For waste form production, tests on stability and composition measurement are needed to provide data to ensure waste form quality. In transporation, data are needed to evaluate the effects of accidents on canisterized waste forms. The new MCC-15 accident test method and some data are presented. Compliance testing needs required by the recent draft repository waste acceptance specifications are described. These specifications will control waste form contents, processing, and performance

  2. Brazilian responses to violence and new forms of mediation: the case of the Grupo Cultural AfroReggae and the experience of the project "Youth and the Police"

    Directory of Open Access Journals (Sweden)

    Sílvia Ramos

    2006-06-01

    Full Text Available This article discusses some aspects of the Brazilian response to urban violence, focusing both official public safety policies and actions of the civil society. The text identifies the lack of a national public safety policy, indicates successful governmental experiences carried out in some states and municipalities, and concentrates on the actions of the police. Analyzing the responses of the civil society, the paper is emphasizing the campaign for disarming the population and the role played by the media. It shows the appearance of groups of young people living in the favelas, organized in turn of cultural experiences that, in multiple aspects, are characterized as "new mediators" in society. These groups thematize violence and try to build new stereotypes dissociating them from the image of criminality. The article describes in particular the cases of the Grupo Cultural AfroReggae, of Rio de Janeiro, and the pilot experience carried out in collaboration with the Minas Gerais Military Police, called "Youth and the Police". The AfroReggae group is a typical example of such a "new mediator", and the initiative of carrying out a work in cooperation with the police opens new perspectives for the traditionally scarce participation of civil organizations engaged in public safety in cooperative projects with the police.

  3. (EOI) Form

    International Development Research Centre (IDRC) Digital Library (Canada)

    Dorine Odongo

    COLLABORATING TECHNICAL AGENCIES: EXPRESSION OF INTEREST FORM. • Please read the information provided about the initiative and the eligibility requirements in the Prospectus before completing this application form. • Ensure all the sections of the form are accurately completed and saved in PDF format.

  4. Modular forms

    NARCIS (Netherlands)

    Edixhoven, B.; van der Geer, G.; Moonen, B.; Edixhoven, B.; van der Geer, G.; Moonen, B.

    2008-01-01

    Modular forms are functions with an enormous amount of symmetry that play a central role in number theory, connecting it with analysis and geometry. They have played a prominent role in mathematics since the 19th century and their study continues to flourish today. Modular forms formed the

  5. Report made on behalf of the commission of foreign affairs about the project of law, adopted by the senate, authorizing the approval of the agreement between the French government and the preliminary commission of the organization of the nuclear test ban treaty, about the conduct of the activities relative to the international control facilities, including the post-certification activities

    International Nuclear Information System (INIS)

    Cazenave, R.

    2003-12-01

    France and the preliminary commission of the comprehensive nuclear test ban treaty organization (CTBTO) concluded on July 13, 2001, an agreement about the conduct of the activities relative to the international surveillance facilities. This agreement aims at organizing the modalities of implementation of the surveillance activities carried out by the technical secretariat of the preliminary committee of CTBTO in the French territory. This document is the report of the French national assembly about the project of law for the approval of this agreement. It presents the difficult implementation of an international test ban system, the French commitment in the comprehensive nuclear test ban treaty (CTBT), and the main dispositions of the agreement of July 13, 2001. (J.S.)

  6. No 2601. Report made on behalf of the commission of foreign affairs about the law project No 2555, authorizing the approval of the agreement between the governments of the French Republic, of the Federal Republic of Germany, of the United Kingdom of Great Britain and Northern Ireland, and of the Netherlands Kingdom, relative to the cooperation in the domain of centrifugation technology

    International Nuclear Information System (INIS)

    2005-01-01

    The Cardiff agreement, signed on July 12, 2005 between France, Germany, UK and the Netherlands, aims at allowing Areva company (France) and the Urenco consortium (Germany, UK, the Netherlands) to set up a cooperation in order for Urenco to share its uranium ultracentrifugation technology with Areva. This industrial agreement between two European champions of uranium enrichment opens up the way to a European cooperation of prime importance for the preservation of the energy security of European countries. This agreement is conformable with all security warranties of the international right. This document recommends the approval by the Parliament of this agreement between France, Germany, UK and the Netherlands for the Areva-Urenco cooperation in the domain of ultracentrifugation as described in the French law project No 2555. (J.S.)

  7. Project of law authorizing the approval of the agreement between the government of the French republic and the government of the Russian federation relative to the civil liability by way of nuclear damage owing to the supply of materials from the French republic devoted to nuclear facilities in the Russian federation

    International Nuclear Information System (INIS)

    Raffarin, J.P.; Villepin, D. de

    2002-01-01

    An agreement between France and Russia was signed on June 20, 2000 about the civil liability of Russia because of the supply of French material devoted to Russian nuclear facilities. This agreement was necessary because Russia do not belong to any of the two big international civil liability systems relative to nuclear energy, i.e. the Paris convention from July 29, 1960 (in the OECD framework) and the Vienna convention from May 21, 1963 (in the IAEA framework). This agreement offers a protection to the French nuclear suppliers against any damage claims in the case of a nuclear accident occurring on the Russian federation territory. This project of law aims at approving this agreement. (J.S.)

  8. Translations of the cholo: the emergence of andean projects of society out of the conversion of the Manchay Puytu tradition from the oral to the written form

    Directory of Open Access Journals (Sweden)

    Rafael Simões Lasevitz

    2014-07-01

    Full Text Available Between the nineteenth and twentieth centuries, many Latin-American writers ventured themselves in the creation of written versions of the traditional Andean oral tale Manchay Puytu. In this article, I propose myself to analyse how some of these versions reflected projects of society conceived by their authors, and that, particularly in relation to a postcolonial Latin-American context in which they were inserted. To do so, I take as central to my reflections the image of the cholo, the Andean mestizo, protagonist hero of Manchay’s narratives who, due to his ambiguous position, would receive a large part of the burden of the expectations of intellectual circles of different periods in the region, both positive and negative. In order to develop my analysis, I make use of an extensive bibliographical research, as well as certain theoretical tools that I borrow from the social sciences and that allow me to think the postcolonial context in which such “translations of the cholo” find themselves in. Finally, I conclude with reflections on the representation of the cholo in Taboada Terán’s Manchay, presented as a psychologically unsustainable being with no place for himself vis-à-vis the coloniality of power of the society he still finds himself in. In the end, I also point out the importance of the Manchay tale above all as a strategy of remembrance of an oppressive colonial past, what is highlighted in most versions of the tale by the image of the quena, an Andean flute of high symbolical power within Quechua cosmology.

  9. The Evolution of Approval Services.

    Science.gov (United States)

    Warzala, Martin

    1994-01-01

    Describes major developments in book approval plans used by academic libraries for acquisition and for information dissemination and document distribution services based on approval-like concepts. Topics addressed include publishers; marketing; the impact of library automation; value-added services; the economic climate; the influence of…

  10. Operational challenges in conducting a community-based technology-enabled mental health services delivery model for rural India: Experiences from the SMART Mental Health Project [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Pallab K. Maulik

    2018-04-01

    Full Text Available Background: There are large gaps in the delivery of mental health care in low- and middle-income countries such as India, and the problems are even more acute in rural settings due to lack of resources, remoteness, and lack of infrastructure, amongst other factors. The Systematic Medical Appraisal Referral and Treatment (SMART Mental Health Project was conceived as a mental health services delivery model using technology-based solutions for rural India. This paper reports on the operational strategies used to facilitate the implementation of the intervention. Method: Key components of the SMART Mental Health Project included delivering an anti-stigma campaign, training of primary health workers in screening, diagnosing and managing stress, depression and increased suicide risk and task sharing of responsibilities in delivering care; and using mobile technology based electronic decision support systems to support delivery of algorithm based care for such disorders. The intervention was conducted in 42 villages across two sites in the state of Andhra Pradesh in south India. A pre-post mixed methods evaluation was done, and in this paper operational challenges are reported. Results: Both quantitative and qualitative results from the evaluation from one site covering about 5000 adults showed that the intervention was feasible and acceptable, and initial results indicated that it was beneficial in increasing access to mental health care and reducing depression and anxiety symptoms. A number of strategies were initiated in response to operational challenges to ensure smoother conduct of the project and facilitated the project to be delivered as envisaged. Conclusions: The operational strategies initiated for this project were successful in ensuring the delivery of the intervention. Those, coupled with other more systematic processes have informed the researchers to understand key processes that need to be in place to develop a more robust study, that

  11. Electronic Approval of Invoices (AEF)

    CERN Document Server

    2004-01-01

    With a view to the simplification of administrative procedures, AS and FI Departments have completed the second phase of the new procedure for the electronic approval of invoices via the EDH application. The aim of this new procedure is to rationalise the invoice approval process, notably by eliminating paper copies from the approval circuit. This will simplify the processing of invoices and facilitate their timely settlement, while at the same time maintaining a high level of security. Phase II includes handling the electronic approval process of invoices whose amounts do not correspond exactly to those of the associated orders. In such cases, budgetary approval is required for the entire invoiced amount. Further information can be obtained at : http://ais.cern.ch/projs/AEF/help/F_help.htm Phase II of the procedure will be introduced gradually with effect from April 2004. Finance Department, Accounts Payable Section Tel: 72295 Organisation and Procedures Tel: 75885 Information Technologies Department,...

  12. Projections of Ocean Acidification Under the U.N. Framework Convention of Climate Change Using a Reduced-Form Climate Carbon-Cycle Model

    Science.gov (United States)

    Hartin, C.

    2016-02-01

    Ocean chemistry is quickly changing in response to continued anthropogenic emissions of carbon to the atmosphere. Mean surface ocean pH has already decreased by 0.1 units relative to the preindustrial era. We use an open-source, simple climate and carbon cycle model ("Hector") to investigate future changes in ocean acidification (pH and calcium carbonate saturations) under the climate agreement from the United Nations Convention on Climate Change Conference (UNFCCC) of Parties in Paris 2015 (COP 21). Hector is a reduced-form, very fast-executing model that can emulate the global mean climate of the CMIP5 models, as well as the inorganic carbon cycle in the upper ocean, allowing us to investigate future changes in ocean acidification. We ran Hector under three different emissions trajectories, using a sensitivity analysis approach to quantify model uncertainty and capture a range of possible ocean acidification changes. The first trajectory is a business-as-usual scenario comparable to a Representative Concentration Pathway (RCP) 8.5, the second a scenario with the COP 21 commitments enacted, and the third an idealized scenario keeping global temperature change to 2°C, comparable to a RCP 2.6. Preliminary results suggest that under the COP 21 agreements ocean pH at 2100 will decrease by 0.2 units and surface saturations of aragonite (calcite) will decrease by 0.9 (1.4) units relative to 1850. Under the COP 21 agreement the world's oceans will be committed to a degree of ocean acidification, however, these changes may be within the range of natural variability evident in some paleo records.

  13. 40 CFR 93.128 - Traffic signal synchronization projects.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Traffic signal synchronization... synchronization projects. Traffic signal synchronization projects may be approved, funded, and implemented without... include such regionally significant traffic signal synchronization projects. ...

  14. Guidance for package approvals in the United Kingdom

    International Nuclear Information System (INIS)

    Morgan-Warren, E.J.

    2004-01-01

    Approval is required under the transport regulations for a wide range of package designs and operations, and applications for competent authority approval and validation are received from many sources, both in the UK and overseas. To assist package designers and applicants for approval, and to promote consistency in applications and their assessment, the UK Department for Transport issues guidance on the interpretation of the transport regulations and the requirements of an application for approval and its supporting safety case. The general guidance document, known as the Guide to an Application for UK Competent Authority Approval of Radioactive Material in Transport, has been issued for many years and updated to encompass the provisions of each successive edition of the IAEA transport regulations. The guide has been referred to in a number of international fora, including PATRAM, and was cited as a 'good practice' in the report of the IAEA TRANSAS appraisal of the UK in 2002. Specialist guides include the Guide to the Suitability of Elastomeric Seal Materials, which is the subject of a separate paper in this conference, and the Guide to the Approval of Freight Containers as Types IP-2 and IP-3 Packages. This paper discusses the guidance material and summarises the administrative and technical information required in support of applications for approval of package designs, special form and low-dispersible radioactive materials, shipments, special arrangements, modifications and validations. (author)

  15. 75 FR 53018 - Proposed Collection; Comment Request for Form 720

    Science.gov (United States)

    2010-08-30

    .... Abstract: Form 720 is used to report (1) excise taxes due from retailers and manufacturers on the sale or... are no changes being made to the form at this time. Type of Review: Extension of a currently approved...

  16. 75 FR 28777 - Information Collection; Financial Information Security Request Form

    Science.gov (United States)

    2010-05-24

    ... Collection; Financial Information Security Request Form AGENCY: Forest Service, USDA. ACTION: Notice; Request... currently approved information collection; Financial Information Security Request Form. DATES: Comments must... Standard Time, Monday through Friday. SUPPLEMENTARY INFORMATION: Title: Financial Information Security...

  17. Formation of the portfolio of high-rise construction projects on the basis of optimization of «risk-return» rate

    Science.gov (United States)

    Uvarova, Svetlana; Kutsygina, Olga; Smorodina, Elena; Gumba, Khuta

    2018-03-01

    The effectiveness and sustainability of an enterprise are based on the effectiveness and sustainability of its portfolio of projects. When creating a production program for a construction company based on a portfolio of projects and related to the planning and implementation of initiated organizational and economic changes, the problem of finding the optimal "risk-return" ratio of the program (portfolio of projects) is solved. The article proposes and approves the methodology of forming a portfolio of enterprise projects on the basis of the correspondence principle. Optimization of the portfolio of projects on the criterion of "risk-return" also contributes to the company's sustainability.

  18. Managing environmental enhancement plans for individual research projects at a national primate research center.

    Science.gov (United States)

    Thom, Jinhee P; Crockett, Carolyn M

    2008-05-01

    We describe a method for managing environmental enhancement plans for individual research projects at a national primate research center where most monkeys are assigned to active research projects. The Psychological Well-being Program (PWB) at the University of Washington National Primate Research Center developed an Environmental Enhancement Plan form (EEPL) that allows PWB to quantify and track changes in enrichment allowances over time while ensuring that each animal is provided with as much enrichment as possible without compromising research. Very few projects involve restrictions on toys or perches. Some projects have restrictions on food treats and foraging, primarily involving the provision of these enrichments by research staff instead of husbandry staff. Restrictions are not considered exemptions unless they entirely prohibit an element of the University of Washington Environmental Enhancement Plan (UW EE Plan). All exemptions must be formally reviewed and approved by the institutional animal care and use committee. Most exemptions from elements of the UW EE Plan involve social housing. Between 2004 and 2006, the percentage of projects with no social contact restrictions increased by 1%, but those prohibiting any tactile social contact declined by 7%, and projects permitting tactile social contact during part of the study increased by 9%. The EEPL form has facilitated informing investigators about the enrichment their monkeys will receive if no restrictions or exemptions are requested and approved. The EEPL form also greatly enhances PWB's ability to coordinate the specific enrichment requirements of a project.

  19. Biosimilars approval process.

    Science.gov (United States)

    Zuñiga, Leyre; Calvo, Begoña

    2010-04-01

    For similar biological medicinal products, the so-called biosimilars, clinical trials are required rather than just the bioequivalence studies required to support the registration of a generic small molecule drug product. The EU Directive 2001/83/EC, as amended, stated that where a biological medicinal product which is similar to a reference biological product, does not meet the conditions in the definition of generic medicinal products the results of appropriate pre-clinical tests or clinical trials relating to these conditions must be provided. The challenge is to determine the exact nature of the non-clinical and clinical programme required to gain regulatory approval. The applicant is encouraged to provide a detailed description of the strategy used to demonstrate the biosimilar and the reference product have similar profiles in terms of quality, safety and efficacy. The extent to which comparability can be proven will have quite an impact on how many non-clinical and clinical studies the biosimilar applicant will be required to conduct. The dossier submitted by the applicant to the EMEA should cover all aspects of the comparability assessment and must include data on possible unwanted immune reactions to the therapeutic protein. Post-marketing pharmacovigilance plans are also expected to be included in the biosimilar dossier. Copyright 2009 Elsevier Inc. All rights reserved.

  20. Drugs Approved for Kidney (Renal Cell) Cancer

    Science.gov (United States)

    ... Your Treatment Research Drugs Approved for Kidney (Renal Cell) Cancer This page lists cancer drugs approved by the ... not listed here. Drugs Approved for Kidney (Renal Cell) Cancer Afinitor (Everolimus) Aldesleukin Avastin (Bevacizumab) Axitinib Bevacizumab Cabometyx ( ...

  1. 42 CFR 403.318 - Approval of State systems.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Approval of State systems. 403.318 Section 403.318 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS SPECIAL PROGRAMS AND PROJECTS Recognition of State Reimbursement Control Systems § 403.318...

  2. 29 CFR 1952.297 - Changes to approved plans.

    Science.gov (United States)

    2010-07-01

    ... maximum authorized penalty levels. Amendments enacted in 1993 reflect the new State organizational... adapting Federal references to the State's administrative structure, was approved by the Assistant...-construction conferences with the Division of Industrial Relations for certain types of construction projects...

  3. 24 CFR 245.430 - Decision on request for approval.

    Science.gov (United States)

    2010-04-01

    ... (3) In the case of HUD's approval of a conversion of residential units in a multifamily housing... corporation or association, which residential rental units are to be converted and whether the conversion is... a conversion from project-paid utilities to tenant-paid utilities or a reduction in tenant utility...

  4. Approval plans issues and innovations

    CERN Document Server

    Katz, Linda S

    2013-01-01

    How can you, as an acquisition librarians, keep current on the output of hundreds of publishers? The answer, of course, is that you cannot. For over 30 years, approval plans have been used by librarians to acquire current titles, save staff time, and build core collections. Even today, these reasons seem appropriate, as libraries try to maintain up-to-date collections and control personnel and operating budgets. However, as shown in Approval Plans: Issues and Innovations, the use of approval plans is not so simple and straightforward; their use is subject to complex procedures and policies--an

  5. Out of the frying pan? Streamlining the ethics review process of multisite qualitative research projects.

    Science.gov (United States)

    Iedema, Rick A M; Allen, Suellen; Britton, Kate; Hor, Suyin

    2013-05-01

    This paper describes the ethics approval processes for two multicentre, nationwide, qualitative health service research projects. The paper explains that the advent of the National Ethics Application Form has brought many improvements, but that attendant processes put in place at local health network and Human Research Ethics Committee levels may have become significantly more complicated, particularly for innovative qualitative research projects. The paper raises several questions based on its analysis of ethics application processes currently in place. WHAT IS KNOWN ABOUT THE TOPIC? The complexity of multicentre research ethics applications for research in health services has been addressed by the introduction of the National Ethics Application Form. Uptake of the form across the country's human research ethics committees has been uneven. WHAT DOES THIS PAPER ADD? This paper adds detailed insight into the ethics application process as it is currently enacted across the country. The paper details this process with reference to difficulties faced by multisite and qualitative studies in negotiating access to research sites, ethics committees' relative unfamiliarity with qualitative research , and apparent tensions between harmonisation and local sites' autonomy in approving research. WHAT ARE THE IMPLICATIONS FOR PRACTITIONERS? Practitioners aiming to engage in research need to be aware that ethics approval takes place in an uneven procedural landscape, made up of variable levels of ethics approval harmonization and intricate governance or site-specific assessment processes.

  6. Environmental approvals in New Brunswick : economic considerations

    Energy Technology Data Exchange (ETDEWEB)

    Marrack, C.; Maitland, R. [Suez Renewable Energy North America, Houston, TX (United States)

    2008-07-01

    This presentation provided a timeline of economic considerations related to New Brunswick's regulatory approval process for wind power developments. The economics of wind power projects require careful consideration during the initial planning phases, as it is not yet known if projects are viable. Spending in the early stages of a project should therefore be limited to items that focus on components of the environmental impact assessment (EIA) process that include establishing a relationship with First Nations groups in the area, and conducting seasonal bird studies. Economic considerations change when project viability is confirmed, and developers can then progress to conducting traditional knowledge studies and further seasonal bird studies. Baseline information studies should be reviewed, and biophysical surveys should involve the identification of any wetlands, sensitive areas, and rare plants. Archaeology studies are also required by the provincial government, as well as bat studies to determine if the site has a resident population of bats. Public and stakeholder consultations and open houses should then be held with an adequate time-frame for the submission of questions and concerns and the development of mitigation strategies. Project viability should be confirmed before power purchase agreements (PPAs) are signed. After PPAs are signed, the largest economic consideration is the schedule-related risk associated with legal and financial problems. It was concluded that noise impact, visual impact, and socioeconomic assessments and studies can be conducted after the PPA is secured. tabs., figs.

  7. 48 CFR 750.7105 - Approving authorities.

    Science.gov (United States)

    2010-10-01

    ... CONTRACT MANAGEMENT EXTRAORDINARY CONTRACTUAL ACTIONS Extraordinary Contractual Actions To Protect Foreign Policy Interests of the United States 750.7105 Approving authorities. All authority to approve actions...

  8. Suncor Energy Inc. annual information form

    International Nuclear Information System (INIS)

    1999-01-01

    This information form presents five year highlights of the company's performance, a narrative description of the company's business, including operations, leasehold interests and royalties, estimated synthetic crude reserves, exploration and production, marketing pipeline and other operations. It also contains certain predictions with respect to Suncor's plans for the future, based on current perceptions of the situation in the oil and gas industry, and assumptions in light of Suncor's own experience and interpretation of historical trends. Some of the risk, uncertainties and other factors that could influence actual results include: (1) changes in the general economic and business conditions; (2) fluctuations in supply and demand for Suncor's products, (3) fluctuations in commodity prices, (4) fluctuations in foreign currency exchange rates, (5) Suncor's ability to respond to changing markets, (6) the ability of Suncor to receive timely regulatory approvals, in particular in connection with Project Millennium, (7) the integrity and reliability of Suncor's capital assets, (8) the cumulative impact of other resource development projects, (9) Suncor's ability to comply with current and future environmental laws, and (10) increased competition from other oil and gas companies. tabs

  9. Drugs Approved for Esophageal Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for esophageal cancer. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  10. Drugs Approved for Liver Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for liver cancer. The list includes generic names and brand names. The drug names link to NCI’s Cancer Drug Information summaries.

  11. Drugs Approved for Kaposi Sarcoma

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for Kaposi sarcoma. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  12. Drugs Approved for Pancreatic Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for pancreatic cancer. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters.

  13. Drugs Approved for Vaginal Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) to prevent vaginal cancer. The list includes generic names and brand names. The drug names link to NCI’s Cancer Drug Information summaries.

  14. Drugs Approved for Skin Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for skin cancer. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  15. Drugs Approved for Vulvar Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for vulvar cancer. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  16. Drugs Approved for Wilms Tumor

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for Wilms tumor and other childhood kidney cancers. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  17. Drugs Approved for Lung Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for lung cancer. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters.

  18. Drugs Approved for Bone Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for bone cancer. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  19. Drugs Approved for Malignant Mesothelioma

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for malignant mesothelioma. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  20. Drugs Approved for Penile Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for penile cancer. The list includes generic names and brand names. The drug names link to NCI’s Cancer Drug Information summaries.

  1. Drugs Approved for Bladder Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for bladder cancer. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters.

  2. Drugs Approved for Endometrial Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for endometrial cancer. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  3. Is It Really FDA Approved?

    Science.gov (United States)

    ... satisfaction before companies can market them in interstate commerce. Some examples of biologics that require approval are ... it means the agency has determined that the benefits of the product outweigh the known risks for ...

  4. Electronic Voucher Approval - Financial Management

    Data.gov (United States)

    US Agency for International Development — This process provides a workflow and eSignature capability which allows the CFO to router vouchers for review and electronic signature approval to COTRs in AIDW. It...

  5. Summary of Research through Phase II/Year 2 of Initially Approved 3 Phase/3 Year Project - Establishing the Relationship between Fracture-Related Dolomite and Primary Rock Fabric on the Distribution of Reservoirs in the Michigan Basin

    Energy Technology Data Exchange (ETDEWEB)

    G. Grammer

    2007-09-30

    This final scientific/technical report covers the first 2 years (Phases I and II of an originally planned 3 Year/3 Phase program). The project was focused on evaluating the relationship between fracture-related dolomite and dolomite constrained by primary rock fabric in the 3 most prolific reservoir intervals in the Michigan Basin. The characterization of select dolomite reservoirs was the major focus of our efforts in Phases I and II of the project. Structural mapping and log analysis in the Dundee (Devonian) and Trenton/Black River (Ordovician) suggest a close spatial relationship among gross dolomite distribution and regional-scale, wrench fault-related NW-SE and NE-SW structural trends. A high temperature origin for much of the dolomite in these 2 studied intervals (based upon fluid inclusion homogenization temperatures and stable isotopic analyses,) coupled with persistent association of this dolomite in reservoirs coincident with wrench fault-related features, is strong evidence for these reservoirs being influenced by hydrothermal dolomitization. In the Niagaran (Silurian), there is a general trend of increasing dolomitization shelfward, with limestone predominant in more basinward positions. A major finding is that facies types, when analyzed at a detailed level, are directly related to reservoir porosity and permeability in these dolomites which increases the predictability of reservoir quality in these units. This pattern is consistent with our original hypothesis of primary facies control on dolomitization and resulting reservoir quality at some level. The identification of distinct and predictable vertical stacking patterns within a hierarchical sequence and cycle framework provides a high degree of confidence at this point that the results should be exportable throughout the basin. Much of the data synthesis and modeling for the project was scheduled to be part of Year 3/Phase III, but the discontinuation of funding after Year 2 precluded those efforts

  6. Circle of Form

    DEFF Research Database (Denmark)

    Jaeger, Thomas Arvid

    2012-01-01

    a common professional language like in mathematics, colour and music. The result is a weaker professionalism in the aesthetic competences compared to the professionalism and competences in other areas. A research project [1] on contrasts or opposites in form investigated the phenomenon in the fields...

  7. 13 CFR 305.12 - Project sign.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Project sign. 305.12 Section 305... WORKS AND ECONOMIC DEVELOPMENT INVESTMENTS Requirements for Approved Projects § 305.12 Project sign. The... the construction period of a sign or signs at a conspicuous place at the Project site indicating that...

  8. 7 CFR 3565.351 - Project management.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Project management. 3565.351 Section 3565.351... AGRICULTURE GUARANTEED RURAL RENTAL HOUSING PROGRAM Project Management § 3565.351 Project management. As a... Agency and complies with an approved management plan for the project. (b) Management plan. The lender...

  9. 23 CFR 810.102 - Eligible projects.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Eligible projects. 810.102 Section 810.102 Highways... SPECIAL USE HIGHWAY PROJECTS Highway Public Transportation Projects and Special Use Highway Facilities § 810.102 Eligible projects. Under this subpart the Federal Highway Administrator may approve on any...

  10. Freedom Project

    Directory of Open Access Journals (Sweden)

    Alejandra Suarez

    2014-02-01

    Full Text Available Freedom Project trains prisoners in nonviolent communication and meditation. Two complementary studies of its effects are reported in this article. The first study is correlational; we found decreased recidivism rates among prisoners trained by Freedom Project compared with recidivism rates in Washington state. The second study compared trained prisoners with a matched-pair control group and found improvement in self-reported anger, self-compassion, and certain forms of mindfulness among the trained group. Ratings of role-plays simulating difficult interactions show increased social skills among the group trained by Freedom Project than in the matched controls.

  11. 75 FR 22675 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2010-04-29

    ... regarding two of the vehicles, a mini-pumper truck and a rescue/crash--snozzle truck, was insufficient to... Description of Projects Approved for Collection and Use: Environmental mitigation for fuel truck parking...

  12. 75 FR 13337 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2010-03-19

    ... improvements. Snow equipment purchase--liquid deice truck. Brief Description of Project Approved for Use: Main... bridges (gates 1 and 4). Update airport layout plan and master plan. Prepare storm water pollution...

  13. SU-G-JeP3-04: Estimating 4D CBCT from Prior Information and Extremely Limited Angle Projections Using Structural PCA and Weighted Free-Form Deformation

    International Nuclear Information System (INIS)

    Harris, W; Yin, F; Zhang, Y; Ren, L

    2016-01-01

    Purpose: To investigate the feasibility of using structure-based principal component analysis (PCA) motion-modeling and weighted free-form deformation to estimate on-board 4D-CBCT using prior information and extremely limited angle projections for potential 4D target verification of lung radiotherapy. Methods: A technique for lung 4D-CBCT reconstruction has been previously developed using a deformation field map (DFM)-based strategy. In the previous method, each phase of the 4D-CBCT was generated by deforming a prior CT volume. The DFM was solved by a motion-model extracted by global PCA and a free-form deformation (GMM-FD) technique, using data fidelity constraint and the deformation energy minimization. In this study, a new structural-PCA method was developed to build a structural motion-model (SMM) by accounting for potential relative motion pattern changes between different anatomical structures from simulation to treatment. The motion model extracted from planning 4DCT was divided into two structures: tumor and body excluding tumor, and the parameters of both structures were optimized together. Weighted free-form deformation (WFD) was employed afterwards to introduce flexibility in adjusting the weightings of different structures in the data fidelity constraint based on clinical interests. XCAT (computerized patient model) simulation with a 30 mm diameter lesion was simulated with various anatomical and respirational changes from planning 4D-CT to onboard volume. The estimation accuracy was evaluated by the Volume-Percent-Difference (VPD)/Center-of-Mass-Shift (COMS) between lesions in the estimated and “ground-truth” on board 4D-CBCT. Results: Among 6 different XCAT scenarios corresponding to respirational and anatomical changes from planning CT to on-board using single 30° on-board projections, the VPD/COMS for SMM-WFD was reduced to 10.64±3.04%/1.20±0.45mm from 21.72±9.24%/1.80±0.53mm for GMM-FD. Using 15° orthogonal projections, the VPD/COMS was

  14. SU-G-JeP3-04: Estimating 4D CBCT from Prior Information and Extremely Limited Angle Projections Using Structural PCA and Weighted Free-Form Deformation

    Energy Technology Data Exchange (ETDEWEB)

    Harris, W; Yin, F; Zhang, Y; Ren, L [Duke University Medical Center, Durham, NC (United States)

    2016-06-15

    Purpose: To investigate the feasibility of using structure-based principal component analysis (PCA) motion-modeling and weighted free-form deformation to estimate on-board 4D-CBCT using prior information and extremely limited angle projections for potential 4D target verification of lung radiotherapy. Methods: A technique for lung 4D-CBCT reconstruction has been previously developed using a deformation field map (DFM)-based strategy. In the previous method, each phase of the 4D-CBCT was generated by deforming a prior CT volume. The DFM was solved by a motion-model extracted by global PCA and a free-form deformation (GMM-FD) technique, using data fidelity constraint and the deformation energy minimization. In this study, a new structural-PCA method was developed to build a structural motion-model (SMM) by accounting for potential relative motion pattern changes between different anatomical structures from simulation to treatment. The motion model extracted from planning 4DCT was divided into two structures: tumor and body excluding tumor, and the parameters of both structures were optimized together. Weighted free-form deformation (WFD) was employed afterwards to introduce flexibility in adjusting the weightings of different structures in the data fidelity constraint based on clinical interests. XCAT (computerized patient model) simulation with a 30 mm diameter lesion was simulated with various anatomical and respirational changes from planning 4D-CT to onboard volume. The estimation accuracy was evaluated by the Volume-Percent-Difference (VPD)/Center-of-Mass-Shift (COMS) between lesions in the estimated and “ground-truth” on board 4D-CBCT. Results: Among 6 different XCAT scenarios corresponding to respirational and anatomical changes from planning CT to on-board using single 30° on-board projections, the VPD/COMS for SMM-WFD was reduced to 10.64±3.04%/1.20±0.45mm from 21.72±9.24%/1.80±0.53mm for GMM-FD. Using 15° orthogonal projections, the VPD/COMS was

  15. Underestimation of Project Costs

    Science.gov (United States)

    Jones, Harry W.

    2015-01-01

    Large projects almost always exceed their budgets. Estimating cost is difficult and estimated costs are usually too low. Three different reasons are suggested: bad luck, overoptimism, and deliberate underestimation. Project management can usually point to project difficulty and complexity, technical uncertainty, stakeholder conflicts, scope changes, unforeseen events, and other not really unpredictable bad luck. Project planning is usually over-optimistic, so the likelihood and impact of bad luck is systematically underestimated. Project plans reflect optimism and hope for success in a supposedly unique new effort rather than rational expectations based on historical data. Past project problems are claimed to be irrelevant because "This time it's different." Some bad luck is inevitable and reasonable optimism is understandable, but deliberate deception must be condemned. In a competitive environment, project planners and advocates often deliberately underestimate costs to help gain project approval and funding. Project benefits, cost savings, and probability of success are exaggerated and key risks ignored. Project advocates have incentives to distort information and conceal difficulties from project approvers. One naively suggested cure is more openness, honesty, and group adherence to shared overall goals. A more realistic alternative is threatening overrun projects with cancellation. Neither approach seems to solve the problem. A better method to avoid the delusions of over-optimism and the deceptions of biased advocacy is to base the project cost estimate on the actual costs of a large group of similar projects. Over optimism and deception can continue beyond the planning phase and into project execution. Hard milestones based on verified tests and demonstrations can provide a reality check.

  16. Problems of the current law concerning official plan approval

    International Nuclear Information System (INIS)

    Bluemel, W.

    1986-01-01

    The booklet presents lectures held in October 1985 at the Speyer University for Administration Science, on the subject of the law concerning official plan approval. The lectures have been selected for their common interest in the requirements of nature conservation and landscape protection. These requirements and the current practice of plan approval procedure are the main issue of the lectures which discuss aspects of environmental impact statements, consideration of ecological requirements, and the role of the landscape conservation plan accompanying official project planning documents. (HSCH) [de

  17. Approval of raxibacumab for the treatment of inhalation anthrax under the US Food and Drug Administration Animal rule

    Directory of Open Access Journals (Sweden)

    Chia-Wei eTsai

    2015-12-01

    Full Text Available On December 14, 2012, the FDA approved raxibacumab, the first product developed under Project BioShield to achieve this milestone, and the first biologic product to be approved through the FDA animal efficacy rule (or Animal Rule. Raxibacumab is approved for the treatment of adult and pediatric patients with inhalational anthrax due to Bacillus anthracis in combination with appropriate antibiotic drugs and for prophylaxis of inhalational anthrax when alternative therapies are not available or are not appropriate. The approval of Raxibacumab illustrates many of the challenges that product developers may encounter when pursuing approval under the Animal Rule and highlights a number of important regulatory and policy issues.

  18. 29 CFR 15.10 - Action on approved claim.

    Science.gov (United States)

    2010-07-01

    .... (a) Payment. Payment of a claim approved under this subpart is contingent upon claimant's execution of a “Voucher for Payment Under Federal Tort Claims Act,” Standard Form 1145. When a claimant is represented by an attorney, the voucher for payment shall designate both the claimant and his or her attorney...

  19. 34 CFR 35.7 - Payment of approved claims.

    Science.gov (United States)

    2010-07-01

    ... sign the voucher for payment, Standard Form 1145, before payment is made. (b) When the claimant is represented by an attorney, the voucher for payment (SF 1145) shall designate both the claimant and his... 34 Education 1 2010-07-01 2010-07-01 false Payment of approved claims. 35.7 Section 35.7 Education...

  20. 45 CFR 35.7 - Payment of approved claims.

    Science.gov (United States)

    2010-10-01

    ... duly authorized agent shall sign the voucher for payment, Standard Form 1145, before payment is made. (b) When the claimant is represented by an attorney, the voucher for payment (SF 1145) shall... 45 Public Welfare 1 2010-10-01 2010-10-01 false Payment of approved claims. 35.7 Section 35.7...

  1. 40 CFR 10.7 - Payment of approved claim.

    Science.gov (United States)

    2010-07-01

    ..., claimant or his duly authorized agent shall sign the voucher for payment, Standard Form 1145, before payment is made. (b) When the claimant is represented by an attorney, the voucher for payment (SF 1145... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Payment of approved claim. 10.7 Section...

  2. 12 CFR 793.7 - Payment of approved claims.

    Science.gov (United States)

    2010-01-01

    ... voucher for payment, Standard Form 1145, before payment is made. (b) When the claimant is represented by an attorney, the voucher for payment (S.F. 1145) shall designate both the claimant and his attorney... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Payment of approved claims. 793.7 Section 793.7...

  3. A case-based reasoning approach for estimating the costs of pump station projects

    Directory of Open Access Journals (Sweden)

    Mohamed M. Marzouk

    2011-10-01

    Full Text Available The effective estimation of costs is crucial to the success of construction projects. Cost estimates are used to evaluate, approve and/or fund projects. Organizations use some form of classification system to identify the various types of estimates that may be prepared during the lifecycle of a project. This research presents a parametric-cost model for pump station projects. Fourteen factors have been identified as important to the influence of the cost of pump station projects. A data set that consists of forty-four pump station projects (fifteen water and twenty-nine waste water are collected to build a Case-Based Reasoning (CBR library and to test its performance. The results obtained from the CBR tool are processed and adopted to improve the accuracy of the results. A numerical example is presented to demonstrate the development of the effectiveness of the tool.

  4. 76 FR 68699 - Approval and Promulgation of Air Quality Implementation Plans; Pennsylvania; Adoption of the...

    Science.gov (United States)

    2011-11-07

    ... formed in the atmosphere as a result of various chemical reactions from precursor emissions of nitrogen... is proposing to conditionally approve the air quality modeling submitted to demonstrate attainment of the 1997 PM 2.5 NAAQS. In order for EPA to fully approve the modeling analysis, PADEP must update the...

  5. 76 FR 61148 - Proposed Information Collection (Approval of School Attendance) Activity: Comment Request

    Science.gov (United States)

    2011-10-03

    ... marriages, a change in course of instruction and termination of school attendance. Affected Public... (Approval of School Attendance) Activity: Comment Request AGENCY: Veterans Benefits Administration... techniques or the use of other forms of information technology. Titles: a. Request for Approval of School...

  6. HyApproval - Handbook for the approval of hydrogen refuelling stations - First preliminary achievements

    Energy Technology Data Exchange (ETDEWEB)

    Wurster, R.; Vandendungen, G.; Guichard, J.; Molag, M.; Barron, J.; Reijalt, M.; Hill, H.J.; Landinger, H.

    2007-05-15

    The EU-funded project HyApproval [www.hyapproval.org] aims at developing a universal Handbook to facilitate the approval process of Hydrogen Refuelling Stations (HRS) in Europe. The main goal of the HyApproval partnership with 22 partners from Europe and one each from China, Japan and the USA is to provide a Handbook of technical and regulatory requirements to assist authorisation officials, companies and organisations in the safe implementation and operation of HRS. Achievements during the first 15 months: analyses of HRS technology concepts and of equipment and safety distances/ Intermediate Design Paper/ Regulations, Codes and Standards (RCS) review and comparison/ first Handbook draft and first review sessions with HySafe experts/ safety matrix/ identification of accident scenarios/ agreement on safety documentation/ critical review of reliability data from collections and risk studies/ risk assessment (RA) criteria definition and RA/ matrix of acceptability and awareness levels/ database of Fire Associations and First Responders/ calendar of hydrogen events/ general description of CGH{sub 2} interfaces. (au)

  7. Materials interactions test methods to measure radionuclide release from waste forms under repository-relevant conditions

    International Nuclear Information System (INIS)

    Strickert, R.G.; Erikson, R.L.; Shade, J.W.

    1984-10-01

    At the request of the Basalt Waste Isolation Project, the Materials Characterization Center has collected and developed a set of procedures into a waste form compliance test method (MCC-14.4). The purpose of the test is to measure the steady-state concentrations of specified radionuclides in solutions contacting a waste form material. The test method uses a crushed waste form and basalt material suspended in a synthetic basalt groundwater and agitated for up to three months at 150 0 C under anoxic conditions. Elemental and radioisotopic analyses are made on filtered and unfiltered aliquots of the solution. Replicate experiments are performed and simultaneous tests are conducted with an approved test material (ATM) to help ensure precise and reliable data for the actual waste form material. Various features of the test method, equipment, and test conditions are reviewed. Experimental testing using actinide-doped borosilicate glasses are also discussed. 9 references, 2 tables

  8. Electronic Approval of Invoices (AEF)

    CERN Multimedia

    2003-01-01

    With a view to the simplification of administrative procedures, AS and FI Divisions have drawn up a new procedure for the electronic approval of invoices via the EDH application. The aim of this new procedure is to rationalise the invoice approval process, notably by eliminating paper copies from the approval circuit. This will simplify the processing of invoices and facilitate their timely settlement, while at the same time maintaining a high level of security. This new procedure, in its current phase, will be gradually implemented from 1 November 2003 onwards. For clarification and further information, please see: http://ais.cern.ch/projs/AEF/help/help.htm . Finance Division, Accounts Payable Tel.: 7.22.95

  9. Giro form reading machine

    Science.gov (United States)

    Minh Ha, Thien; Niggeler, Dieter; Bunke, Horst; Clarinval, Jose

    1995-08-01

    Although giro forms are used by many people in daily life for money remittance in Switzerland, the processing of these forms at banks and post offices is only partly automated. We describe an ongoing project for building an automatic system that is able to recognize various items printed or written on a giro form. The system comprises three main components, namely, an automatic form feeder, a camera system, and a computer. These components are connected in such a way that the system is able to process a bunch of forms without any human interactions. We present two real applications of our system in the field of payment services, which require the reading of both machine printed and handwritten information that may appear on a giro form. One particular feature of giro forms is their flexible layout, i.e., information items are located differently from one form to another, thus requiring an additional analysis step to localize them before recognition. A commercial optical character recognition software package is used for recognition of machine-printed information, whereas handwritten information is read by our own algorithms, the details of which are presented. The system is implemented by using a client/server architecture providing a high degree of flexibility to change. Preliminary results are reported supporting our claim that the system is usable in practice.

  10. Fiscal 1998 research report. Research on the possibility of promoting CDM project through technology transfer with plant exports; 1998 nendo chosa hokokusho. Plant yushutsugata gijutsu iten wo tsujita CDM project suishin kanosei ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Study was made on promotion of CDM (clean development mechanism) project through technology transfer with plant exports. Although CDM system was provided in COP3 on climate change held in Kyoto in 1997, its detailed rules including project approval are yet undecided, and only the schedule to provide the detailed rules until COP6 in 2000 was decided in COP4 in 1998. The common recognition that the CDM project with plant exports produces various merits for both Japan and the partner country is increasing. However, from the viewpoint of forming concrete CDM projects, most Japanese enterprises are passive in approach to the CDM project because of no detailed design of CDM, uncertain profitability and procedures, and avoidance of additional burdens. Plant export is also difficult because of the fact that assessment of a new project is difficult. Enterprises' deeper recognition on the CDM project, and a governmental integrated support system are desirable. (NEDO)

  11. The VIRGO project

    International Nuclear Information System (INIS)

    Yvert, M.

    1991-01-01

    The detection of gravitational waves is, nowadays, technologically possible. The Virgo project, proposed by a French-Italian collaboration, is now on the verge of being fully approved and funded. The goal of the Virgo project is, first, to detect gravitational waves. The next will be to perform, in conjunction with other similar detectors, more precise measurements (i.e. the spin of the graviton) and start gravitational wave astrophysical observations. The method is proposed to use a large Michelson interferometer as a detector. The main motivations, characteristics and expected sensitivity of this project are described. (R.P.) 14 refs., 6 figs

  12. Form Filling with SCC in a Vertical Form

    DEFF Research Database (Denmark)

    Thrane, Lars Nyholm

    2004-01-01

    This paper presents the results obtained from two different vertical form filling experiments with SCC that have been completed as part of the experimental work in an ongoing Ph.D project. The project is carried out at the Danish Technological Institute in collaboration with the Technical...

  13. A Document Imaging Technique for Implementing Electronic Loan Approval Process

    Directory of Open Access Journals (Sweden)

    J. Manikandan

    2015-04-01

    Full Text Available The image processing is one of the leading technologies of computer applications. Image processing is a type of signal processing, the input for image processor is an image or video frame and the output will be an image or subset of image [1]. Computer graphics and computer vision process uses an image processing techniques. Image processing systems are used in various environments like medical fields, computer-aided design (CAD, research fields, crime investigation fields and military fields. In this paper, we proposed a document image processing technique, for establishing electronic loan approval process (E-LAP [2]. Loan approval process has been tedious process, the E-LAP system attempts to reduce the complexity of loan approval process. Customers have to login to fill the loan application form online with all details and submit the form. The loan department then processes the submitted form and then sends an acknowledgement mail via the E-LAP to the requested customer with the details about list of documents required for the loan approval process [3]. The approaching customer can upload the scanned copies of all required documents. All this interaction between customer and bank take place using an E-LAP system.

  14. Drugs Approved for Cervical Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for cervical cancer. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters. The drug names link to NCI's Cancer Drug Information summaries.

  15. Drugs Approved for Multiple Myeloma

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for multiple myeloma and other plasma cell neoplasms. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters. The drug names link to NCI's Cancer Drug Information summaries.

  16. Drugs Approved for Testicular Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for testicular cancer. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters. The drug names link to NCI's Cancer Drug Information summaries.

  17. Drugs Approved for Hodgkin Lymphoma

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for Hodgkin lymphoma. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters. The drug names link to NCI's Cancer Drug Information summaries.

  18. Drugs Approved for Myeloproliferative Neoplasms

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for myeloproliferative neoplasms. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters. The drug names link to NCI's Cancer Drug Information summaries.

  19. 48 CFR 1352.228-76 - Approval of group insurance plans.

    Science.gov (United States)

    2010-10-01

    ... COMMERCE CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 1352... Officer. Any change in benefits provided under an approved plan that can reasonably be expected to...

  20. 78 FR 19264 - Agency Information Collection Activities: Announcement of Board Approval Under Delegated...

    Science.gov (United States)

    2013-03-29

    ... semi-annually and require financial companies with total consolidated assets of more than $10 billion... forms. One commenter expressed concern over similar elements between the Consolidated Financial... Paperwork Reduction Act Submission, supporting statements and approved collection of information instrument...

  1. 75 FR 31745 - Notice of Request for Approval of an Information Collection; National Veterinary Services...

    Science.gov (United States)

    2010-06-04

    ...] Notice of Request for Approval of an Information Collection; National Veterinary Services Laboratories... collection associated with the National Veterinary Services Laboratories animal health diagnostic system...: For information on request forms associated with the National Veterinary Services Laboratories animal...

  2. Process-based project proposal risk management

    Directory of Open Access Journals (Sweden)

    Alok Kumar

    2016-12-01

    Full Text Available We all are aware of the organizational omnipresence. Projects within the organizations are ubiquitous too. Projects achieve their goals successfully if they are planned, scheduled, controlled and implemented well. The project lifecycle of initiating, planning, scheduling, controlling and implementing are very well-planned by project managers and the organizations. Successful projects have well-developed risk management plans to deal with situations impacting projects. Like any other organisation, a university does try to access funds for different purposes too. For such organisations, running a project is not the issue, rather getting a project proposal approved to fund a project is the key. Project proposal processing is done by the nodal office in every organisation. Usually, these nodal offices help in administration and submission of a project proposal for accessing funds. Seldom are these nodal project offices within the organizations facilitate a project proposal approval by proactively reaching out to the project managers. And as project managers prepare project proposals, little or no attention is made to prepare a project proposal risk plan so as to maximise project acquisition. Risk plans are submitted while preparing proposals but these risk plans cater to a requirement to address actual projects upon approval. Hence, a risk management plan for project proposal is either missing or very little effort is made to treat the risks inherent in project acquisition. This paper is an integral attempt to highlight the importance of risk treatment for project proposal stage as an extremely important step to preparing the risk management plan made for projects corresponding to their lifecycle phases. Several tools and techniques have been proposed in the paper to help and guide either the project owner (proposer or the main organisational unit responsible for project management. Development of tools and techniques to further enhance project

  3. 13 CFR 107.630 - Requirement for Licensees to file financial statements with SBA (Form 468).

    Science.gov (United States)

    2010-01-01

    ... Form 468 must be audited by an independent public accountant acceptable to SBA. (2) Insurance requirement for public accountant. Unless SBA approves otherwise, your independent public accountant must...

  4. 7 CFR 632.18 - Special projects.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Special projects. 632.18 Section 632.18 Agriculture... AGRICULTURE LONG TERM CONTRACTING RURAL ABANDONED MINE PROGRAM Qualifications § 632.18 Special projects. (a) The NRCS State conservationist may approve the following types of special projects subject to the...

  5. Approved reference and testing materials for use in Nuclear Waste Management Research and Development Programs

    International Nuclear Information System (INIS)

    Mellinger, G.B.; Daniel, J.L.

    1984-12-01

    This document, addressed to members of the waste management research and development community summarizes reference and testing materials available from the Nuclear Waste Materials Characterization Center (MCC). These materials are furnished under the MCC's charter to distribute reference materials essential for quantitative evaluation of nuclear waste package materials under development in the US. Reference materials with known behavior in various standard waste management related tests are needed to ensure that individual testing programs are correctly performing those tests. Approved testing materials are provided to assist the projects in assembling materials data base of defensible accuracy and precision. This is the second issue of this publication. Eight new Approved Testing Materials are listed, and Spent Fuel is included as a separate section of Standard Materials because of its increasing importance as a potential repository storage form. A summary of current characterization information is provided for each material listed. Future issues will provide updates of the characterization status of the materials presented in this issue, and information about new standard materials as they are acquired. 7 references, 1 figure, 19 tables

  6. 78 FR 27471 - Projects Rescinded for Consumptive Uses of Water

    Science.gov (United States)

    2013-05-10

    ... SUSQUEHANNA RIVER BASIN COMMISSION Projects Rescinded for Consumptive Uses of Water AGENCY: Susquehanna River Basin Commission. ACTION: Notice. SUMMARY: This notice lists the approved by rule projects..., being rescinded for the consumptive use of water pursuant to the Commission's approval by rule process...

  7. Measurement of software project management effectiveness

    OpenAIRE

    Demir, Kadir Alpaslan

    2008-01-01

    Approved for public release; distribution is unlimited. Evaluating, monitoring, and improving the effectiveness of project management can contribute to successful acquisition of software systems. In this dissertation, we introduce a quantitative metric for gauging the effectiveness of managing a software-development project. The metric may be used to evaluate and monitor project management effectiveness in software projects by project managers, technical managers, executive man...

  8. 76 FR 210 - Reports, Forms, and Recordkeeping Requirements

    Science.gov (United States)

    2011-01-03

    ... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration [Docket No. NHTSA-2010-0111] Reports, Forms, and Recordkeeping Requirements AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of Transportation. ACTION: Request for extension of a currently approved...

  9. 78 FR 57000 - Reports, Forms, and Recordkeeping Requirements

    Science.gov (United States)

    2013-09-16

    ... automated, electronic, mechanical, or other technological collection techniques or other forms of...: National Automotive Sampling System (NASS). Type of Request: Extension of a currently approved collection...). The National Automotive Sampling System (NASS) Crashworthiness Data System (CDS) of the National...

  10. Immunotherapy Combination Approved for Advanced Kidney Cancer

    Science.gov (United States)

    FDA has approved the combination of the immunotherapy drugs nivolumab (Opdivo) and ipilimumab (Yervoy) as an initial treatment for some patients with advanced kidney cancer. The approval is expected to immediately affect patient care, as this Cancer Currents post explains.

  11. 77 FR 8095 - Review and Approval of Projects

    Science.gov (United States)

    2012-02-14

    ... sources. Furthermore, unlike the typical diversion of water out of the basin where the consumptive loss... control. Member states are already exercising or preparing to exercise their water quality authority with..., for the conservation, utilization, control, development, or management of water resources, which can...

  12. 75 FR 60617 - Review and Approval of Projects

    Science.gov (United States)

    2010-10-01

    ... fracking water. Also, people farther than a half mile may experience impacts to their water, air, and soil... environmental impacts of drilling and fracking activity. Response: The Commission can find no evidence linking...

  13. 24 CFR 970.15 - Specific criteria for HUD approval of demolition requests.

    Science.gov (United States)

    2010-04-01

    ... modifications is cost-effective to return the public housing project or portion of the project to useful life... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Specific criteria for HUD approval of demolition requests. 970.15 Section 970.15 Housing and Urban Development Regulations Relating to...

  14. Regional restrictions on environmental impact assessment approval in China: the legitimacy of environmental authoritarianism

    NARCIS (Netherlands)

    Zhu, X.; Zhang, L.; Ran, R.; Mol, A.P.J.

    2015-01-01

    The poor enforcement and effectiveness of environmental impact assessment (EIA) on construction and investment projects in China has long been blamed for not preventing environmental pollution and degradation. At the same time, freezing EIA approval of all new projects in an administrative region,

  15. 40 CFR 145.31 - Approval process.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Approval process. 145.31 Section 145.31 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE UIC PROGRAM REQUIREMENTS Program Approval, Revision and Withdrawal § 145.31 Approval process. (a...

  16. 40 CFR 123.61 - Approval process.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Approval process. 123.61 Section 123... REQUIREMENTS Program Approval, Revision, and Withdrawal § 123.61 Approval process. (a) After determining that a...; and (6) Briefly outline the fundamental aspects of the State's proposed program, and the process for...

  17. 7 CFR 1710.406 - Loan approval.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Loan approval. 1710.406 Section 1710.406 Agriculture... GENERAL AND PRE-LOAN POLICIES AND PROCEDURES COMMON TO ELECTRIC LOANS AND GUARANTEES Application Requirements and Procedures for Loans § 1710.406 Loan approval. (a) A loan is approved when the Administrator...

  18. 40 CFR 52.1772 - Approval status.

    Science.gov (United States)

    2010-07-01

    ...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) North Carolina § 52.1772 Approval status. (a) With the exceptions set forth in this subpart, the Administrator approves North Carolina's plans for... CTGs issued by the previous January. (b) New Source review permits issued pursuant to section 173 of...

  19. 40 CFR 52.2122 - Approval status.

    Science.gov (United States)

    2010-07-01

    ... sources covered by CTGs issued by the previous January. (b) EPA disapproved South Carolina's generic...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) South Carolina § 52.2122 Approval status. (a) With the exceptions set forth in this subpart, the Administrator approves South Carolina's plans for...

  20. 40 CFR 52.1323 - Approval status.

    Science.gov (United States)

    2010-07-01

    ... on January 16, 1979 (44 FR 3274) are met. (b) The Administrator approves Rule 10 CSR 10-2.290 as.... (c) The Administrator approves Rule 10 CSR 10-2.230 as identified under § 52.1320, paragraph (c)(70... SIP would be the emission limits stated in the rule. (d) The Administrator approves Rule 10 CSR 10-5...

  1. 9 CFR 147.52 - Approved tests.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Approved tests. 147.52 Section 147.52 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... Approved Tests § 147.52 Approved tests. (a) The procedures for the bacteriological examination of poultry...

  2. 38 CFR 17.65 - Approvals and provisional approvals of community residential care facilities.

    Science.gov (United States)

    2010-07-01

    ... approvals of community residential care facilities. 17.65 Section 17.65 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Community Residential Care § 17.65 Approvals and provisional approvals of community residential care facilities. (a) An approval of a facility meeting all of...

  3. 24 CFR 850.151 - Project restrictions.

    Science.gov (United States)

    2010-04-01

    ... be done in accordance with the HUD-approved Affirmative Fair Housing Marketing Plan, Form HUD-935.2... affirmative fair housing marketing objectives and the owner's HUD-approved AFHM Plan. With respect to any... tenant (for example, by designating another comparable unit as a low-income unit), the owner may continue...

  4. Setting Priorities For Large Research Facility Projects Supported By the National Science Foundation

    National Research Council Canada - National Science Library

    2005-01-01

    ...) level has stalled in the face of a backlog of approved but unfunded projects. Second, the rationale and criteria used to select projects and set priorities among projects for MREFC funding have not been clearly and publicly articulated...

  5. Spin Forming Aluminum Crew Module (CM) Metallic Aft Pressure Vessel Bulkhead (APVBH) - Phase II

    Science.gov (United States)

    Hoffman, Eric K.; Domack, Marcia S.; Torres, Pablo D.; McGill, Preston B.; Tayon, Wesley A.; Bennett, Jay E.; Murphy, Joseph T.

    2015-01-01

    The principal focus of this project was to assist the Multi-Purpose Crew Vehicle (MPCV) Program in developing a spin forming fabrication process for manufacture of the Orion crew module (CM) aft pressure vessel bulkhead. The spin forming process will enable a single piece aluminum (Al) alloy 2219 aft bulkhead resulting in the elimination of the current multiple piece welded construction, simplify CM fabrication, and lead to an enhanced design. Phase I (NASA TM-2014-218163 (1)) of this assessment explored spin forming the single-piece CM forward pressure vessel bulkhead. The Orion MPCV Program and Lockheed Martin (LM) recently made two critical decisions relative to the NESC Phase I work scope: (1) LM selected the spin forming process to manufacture a single-piece aft bulkhead for the Orion CM, and (2) the aft bulkhead will be manufactured from Al 2219. Based on the Program's new emphasis related to the spin forming process, the NESC was asked to conduct a Phase II assessment to assist in the LM manufacture of the aft bulkhead and to conduct a feasibility study into spin forming the Orion CM cone. This activity was approved on June 19, 2013. Dr. Robert Piascik, NASA Technical Fellow for Materials at the Langley Research Center (LaRC), was selected to lead this assessment. The project plan was approved by the NASA Engineering and Safety Center (NESC) Review Board (NRB) on July 18, 2013. The primary stakeholders for this assessment were the NASA and LM MPCV Program offices. Additional benefactors are commercial launch providers developing CM concepts.

  6. Problems of Research, Projects and Mechanisms for Their Implementation in Chelyabinsk City Agglomeration

    Science.gov (United States)

    Bolshakov, V. V.

    2017-11-01

    The article analyzes the research and design methods of urban agglomerations in the context of the Chelyabinsk agglomeration from the point of view of correctness, objectivity and consistency of the results obtained. The completed and approved project of the Chelyabinsk agglomeration is analysed to provide architectural and planning solutions for sustainable social and economic development according to the theories that have been formed to date. The possibility of effectuation and implementation of the approved project of the Chelyabinsk agglomeration taking in account existing specific natural, historical and socio-economic factors characteristic for the territory under consideration is examined. The authors draw the conclusions the project of the Chelyabinsk agglomeration has been developed in line with the town-planning solutions that do not reflect modern approaches based on the competitive advantages of territories and do not form a space providing transition to a modernized and innovative economy. Specific town-planning decisions have a weak justification and an undeveloped methodology for pre-project analysis and methodology for designing urban agglomerations because of absence of a full study of the phenomenon of urban agglomeration and processes occurring in it today. It is necessary to continue research in the field of development of the Chelyabinsk agglomeration with the use of a logical and objective methodology to analyze the territory and design which can lead to the formation of an urban-planning information model that reflects all the system processes and allows for predicting project solutions.

  7. REVIEW OF NRC APPROVED DIGITAL CONTROL SYSTEMS ANALYSIS

    International Nuclear Information System (INIS)

    Markman, D.W.

    1999-01-01

    Preliminary design concepts for the proposed Subsurface Repository at Yucca Mountain indicate extensive reliance on modern, computer-based, digital control technologies. The purpose of this analysis is to investigate the degree to which the U. S. Nuclear Regulatory Commission (NRC) has accepted and approved the use of digital control technology for safety-related applications within the nuclear power industry. This analysis reviews cases of existing digitally-based control systems that have been approved by the NRC. These cases can serve as precedence for using similar types of digitally-based control technologies within the Subsurface Repository. While it is anticipated that the Yucca Mountain Project (YMP) will not contain control systems as complex as those required for a nuclear power plant, the review of these existing NRC approved applications will provide the YMP with valuable insight into the NRCs review process and design expectations for safety-related digital control systems. According to the YMP Compliance Program Guidance, portions of various NUREGS, Regulatory Guidelines, and nuclear IEEE standards the nuclear power plant safety related concept would be applied to some of the designs on a case-by-case basis. This analysis will consider key design methods, capabilities, successes, and important limitations or problems of selected control systems that have been approved for use in the Nuclear Power industry. An additional purpose of this analysis is to provide background information in support of further development of design criteria for the YMP. The scope and primary objectives of this analysis are to: (1) Identify and research the extent and precedence of digital control and remotely operated systems approved by the NRC for the nuclear power industry. Help provide a basis for using and relying on digital technologies for nuclear related safety critical applications. (2) Identify the basic control architecture and methods of key digital control

  8. 30 CFR 14.7 - Approval marking and distribution records.

    Science.gov (United States)

    2010-07-01

    ..., EVALUATION, AND APPROVAL OF MINING PRODUCTS REQUIREMENTS FOR THE APPROVAL OF FLAME-RESISTANT CONVEYOR BELTS General Provisions § 14.7 Approval marking and distribution records. (a) An approved conveyor belt must be marketed only under the name specified in the approval. (b) Approved conveyor belt must be legibly and...

  9. Approval of radioactive consumer goods

    International Nuclear Information System (INIS)

    Paynter, R.A.

    1992-01-01

    The 1980 Euratom Directive obliges the UK to draw up a system of prior authorization for the use of radioactive substances in a range of consumer products, and the Government intends to make regulations to fulfil the requirements of the Directive. These regulations will empower NRPB to approve such products prior to their supply to the public. In this brief article, the NRPB reviews the criteria against which to consider any proposed use of radioactive substances, considers radiological production standards for products and discusses the questions of the labelling of radioactive consumer goods. (UK)

  10. Management of Software Development Projects

    Directory of Open Access Journals (Sweden)

    Felician ALECU

    2011-04-01

    Full Text Available Any major software development starts with the Initiating process group. Once the charter document is approved, the Planning and then to the Executing stages will follow. Monitoring and Controlling is measuring the potential performance deviation of the project in terms of schedule and costs and performs the related Integrated Change Control activities. At the end, during the Closing, the program/project manager will check the entire work is completed and the objectives are met.

  11. Tectonics: The meaning of form

    DEFF Research Database (Denmark)

    Christiansen, Karl; Brandt, Per Aage

    Tectonics – The meaning of form deals with one of the core topics of architecture: the relationship between form and content. In the world of architecture, form is not only made from brick, glass and wood. Form means something. When a material is processed with sufficient technical skill and insi...... perspectives. You can read the chapters in any order you like – from the beginning, end or the middle. There is no correct order. The project is methodologically inductive: the more essays you read, the broader your knowledge of tectonics get....

  12. Trastuzumab emtansine: first global approval.

    Science.gov (United States)

    Ballantyne, Anita; Dhillon, Sohita

    2013-05-01

    Genentech and ImmunoGen are collaborating on the development of trastuzumab emtansine, a HER2 antibody-drug conjugate that comprises Genentech's trastuzumab antibody linked to ImmunoGen's anti-mitotic agent, mertansine (a maytansine derivative; also known as DM1). The conjugate combines two strategies: the anti-HER2 activity of trastuzumab, and the targeted intracellular delivery of mertansine, a tubulin polymerisation inhibitor which interferes with mitosis and promotes apoptosis. The linker in trastuzumab emtansine is a non-reducible thioether linker, N-succinimidyl-4-(N-maleimidomethyl) cyclohexane-1-carboxylate (SMCC, designated MCC after conjugation). Trastuzumab emtansine (Kadcyla™) has been launched in the USA as second-line monotherapy for HER2-positive metastatic breast cancer, and has been filed for approval in the EU and Japan in this indication. Trastuzumab emtansine is in phase III development as first-line combination therapy or monotherapy for metastatic HER2-positive breast cancer, and as third-line monotherapy for metastatic HER2-positive breast cancer. Phase II development is underway for early-stage breast cancer and phase II/III development is underway in patients with HER2-positive gastric cancer. This article summarizes the milestones in the development of trastuzumab emtansine leading to this first approval for the treatment of patients with HER2-positive, metastatic breast cancer who previously received trastuzumab and a taxane, separately or in combination.

  13. PARTNER Project

    CERN Multimedia

    Ballantine, A; Dixon-Altaber, H; Dosanjh, M; Kuchina, L

    2011-01-01

    Hadrontherapy uses particle beams to treat tumours located near critical organs and tumours that respond poorly to conventional radiation therapy. It has become evident that there is an emerging need for reinforcing research in hadrontherapy and it is essential to train professionals in this rapidly developing field. PARTNER is a 4-year Marie Curie Training project funded by the European Commission with 5.6 million Euros aimed at the creation of the next generation of experts. Ten academic institutes and research centres and two leading companies are participating in PARTNER, that is coordinated by CERN, forming a unique multidisciplinary and multinational European network. The project offers research and training opportunities to 25 young biologists, engineers, physicians and physicists and is allowing them to actively develop modern techniques for treating cancer in close collaboration with leading European Institutions. For this purpose PARTNER relies on cutting edge research and technology development, ef...

  14. 76 FR 69738 - Revised 2011 Annual Telecommunications Reporting Worksheet (FCC Form 499-A) and Accompanying...

    Science.gov (United States)

    2011-11-09

    ... Telecommunications Reporting Worksheet (FCC Form 499-A) and Accompanying Instructions AGENCY: Federal Communications... Telecommunications Reporting Worksheet (FCC Form 499-A) and accompanying instructions that have been approved by the... INFORMATION CONTACT: Ernesto Beckford, Wireline Competition Bureau, Telecommunications Access Policy Division...

  15. Teaching and Learning Science in Authoritative Classrooms: Teachers' Power and Students' Approval in Korean Elementary Classrooms

    Science.gov (United States)

    Lee, Jeong-A.; Kim, Chan-Jong

    2017-09-01

    This study aims to understand interactions in Korean elementary science classrooms, which are heavily influenced by Confucianism. Ethnographic observations of two elementary science teachers' classrooms in Korea are provided. Their classes are fairly traditional teaching, which mean teacher-centered interactions are dominant. To understand the power and approval in science classroom discourse, we have adopted Critical Discourse Analysis (CDA). Based on CDA, form and function analysis was adopted. After the form and function analysis, all episodes were analyzed in terms of social distance. The results showed that both teachers exercised their power while teaching. However, their classes were quite different in terms of getting approval by students. When a teacher got students' approval, he could conduct the science lesson more effectively. This study highlights the importance of getting approval by students in Korean science classrooms.

  16. 7 CFR 1726.252 - Prior approved contract modification related to liability for special and consequential damages.

    Science.gov (United States)

    2010-01-01

    ... consequential damages on account of breach of this contract shall not exceed in total an amount equal to... 7 Agriculture 11 2010-01-01 2010-01-01 false Prior approved contract modification related to... CONSTRUCTION POLICIES AND PROCEDURES Modifications to RUS Standard Contract Forms § 1726.252 Prior approved...

  17. 7 CFR 1735.90 - Preliminary approvals.

    Science.gov (United States)

    2010-01-01

    ... AGRICULTURE GENERAL POLICIES, TYPES OF LOANS, LOAN REQUIREMENTS-TELECOMMUNICATIONS PROGRAM Requirements for... franchises, licenses, and permits; (4) All required regulatory body approvals; (5) All required corporate...

  18. Marketing Approval of Ethical Kampo Medicines.

    Science.gov (United States)

    Hakamatsuka, Takashi

    2017-01-01

    Kampo medicine is an original traditional medicine in Japan. Currently, 148 ethical Kampo formulations (Kampo prescription drugs) are registered in the National Health Insurance Price List. Kampo medicines can be prescribed under the national insurance system, which shows that they are part of conventional medicine in Japan. Japan has a unified drug approval system that does not distinguish between Western and Kampo medicines, and both are subject to the same regulations. The application for the market approval of ethical Kampo medicines is based on the general notification for drugs, i.e., "Handling of Ethical Combination Drugs" in "Precautions Necessary When Applying for Drug Marketing Approval" (Yakushokushinsa Notification No. 1121-12 of November 21, 2014). Furthermore, applications for the market approval of ethical Kampo medicines should follow the Kampo-specific notification of "Handling of Ethical Kampo Medicines" (Yakushin Notification No. 804 of June 25, 1980). Data from comparative studies with standard decoctions must be submitted with approval applications according to Yakushin 2 Notification No. 120 of May 31, 1985. The safety, efficacy, and quality of Kampo medicines are comprehensively assured by the Japanese Pharmacopoeia, Good Manufacturing Practice, Good Agricultural and Collection Practices, marketing approval certificate, approval standard, and pharmacovigilance. I believe that the basic framework for the market approval of ethical Kampo medicines has been established as described above. The key factors for the practical application of superior manufacturing technology and research achievements and the promotion of drug development are the specific guidelines for the approval of drugs of herbal origin.

  19. OMB Recommended vs Approved Operating Budget

    Data.gov (United States)

    Montgomery County of Maryland — This dataset includes the Fiscal Year 2015 County Executive Recommended and County Council Approved operating budgets for Montgomery County, for comparison purposes....

  20. Densified waste form and method for forming

    Science.gov (United States)

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2015-08-25

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  1. The Honeymoon project: Australia's first in situ leach uranium project

    International Nuclear Information System (INIS)

    Ackland, M.C.

    1997-01-01

    The Honeymoon uranium deposit is one of several roll front uranium deposits in South Australia. It was discovered in 1971, the project developed in the 1970's, and was ready for demonstration of the In Situ Leaching (ISL) production techniques by January 1983, when the project was stopped, despite it having met the environmental approvals to proceed, due to the Australian Labour Party's 'three mines policy'. From 1983 until March 1996 the project was mothballed. In late 1996 Southern Cross Resources Inc. (SCRI) reached agreement with Mount Isa Mining (MIM) to purchase its uranium interests in Honeymoon, Goulds Dam and EL 2310 whilst simultaneously acquiring Sedimentary Holdings NL's interests in EL 2310. By April 1997 these interests were consolidated in SCRI's wholly owned subsidiary, Southern Cross Resources Australia Ply Ltd which is the operating company. Activities are presently underway to rehabilitate the existing treatment plant and continue the program that was outlined in the approved 1981 Honeymoon Environmental Impact Statement

  2. Polypharmacology of Approved Anticancer Drugs.

    Science.gov (United States)

    Amelio, Ivano; Lisitsa, Andrey; Knight, Richard A; Melino, Gerry; Antonov, Alexey V

    2017-01-01

    The major drug discovery efforts in oncology have been concentrated on the development of selective molecules that are supposed to act specifically on one anticancer mechanism by modulating a single or several closely related drug targets. However, a bird's eye view on data from multiple available bioassays implies that most approved anticancer agents do, in fact, target many more proteins with different functions. Here we will review and systematize currently available information on the targets of several anticancer drugs along with revision of their potential mechanisms of action. Polypharmacology of the current antineoplastic agents suggests that drug clinical efficacy in oncology can be achieved only via modulation of multiple cellular mechanisms. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  3. The transport system approval concept

    International Nuclear Information System (INIS)

    Pettersson, B.G.

    1991-01-01

    The needs for, and merits of, a new concept for the safety assessment and approval of shipments of radioactive materials is introduced and discussed. The purpose of the new concept is to enable and encourage integration of analysis and review of transport safety with similar safety analysis and review of the handling operations involving the radioactive material at the despatching and receiving ends of a shipment. Safety contributing elements or functions of the means of transport (the Transport System) can thus readily be taken into account in the assessment. The objective is to avoid constraints -experienced or potential - introduced by the package functional provisions contained in the transport regulations, whilst maintaining safety during transport, as well as during facility handling operations, at least at the level at the level currently established. (author)

  4. Competent authority approval of package designs in the United Kingdom

    International Nuclear Information System (INIS)

    Morgan-Warren, E.J.

    1999-01-01

    Type B packages and all packages containing fissile material, as well as special form radioactive materials, special arrangements and certain shipments, are required to be approved by the competent authority. In the United Kingdom competent authority approval is carried out on behalf of the Secretary of State by the Radioactive Materials Transport Division (RMTD) of the Department of the Environment, Transport and the Regions (DETR). Competent authority approval of a package design is given only after a detailed assessment of the design by the specialist staff of RMTD. There are three facets to the assessment procedure, namely engineering, criticality and radiation protection, and quality assurance. The engineering assessor ensures that the designer has demonstrated the integrity of the containment and shielding systems under the regulatory conditions. The criticality assessor examines criticality safety and radiation protection measures, and together with the engineering assessor, decides whether this is maintained under regulatory conditions. The quality assurance assessor verifies that the applicant has established the necessary controls to ensure that the design requirements are met. The applicant is responsible for making the case for approval, but the assessment is facilitated if the competent authority is involved with the designer at an early stage in development and during the construction of any test prototype. When a regulatory test programme is required, it is designed and carried out by the applicant, but agreed and witnessed by representatives of RMTD. Following the test programme, the applicant submits a formal application, supported by a design safety report (DSR). The DSR provides a full analysis of the design and the test results, including the behaviour of the package under normal and accident conditions of transport, the manufacturing and maintenance procedures, quality assurance and the emergency provisions for the operation of the package

  5. Research ethics board approval for an international thromboprophylaxis trial.

    Science.gov (United States)

    Lutz, Kristina; Wilton, Kelly; Zytaruk, Nicole; Julien, Lisa; Hall, Richard; Harvey, Johanne; Skrobik, Yoanna; Vlahakis, Nicholas; Meade, Laurie; Matte, Andrea; Meade, Maureen; Burns, Karen; Albert, Martin; Cash, Bronwyn Barlow; Vallance, Shirley; Klinger, James; Heels-Ansdell, Diane; Cook, Deborah

    2012-06-01

    Research ethics board (REB) review of scientific protocols is essential, ensuring participants' dignity, safety, and rights. The objectives of this study were to examine the time from submission to approval, to analyze predictors of approval time, and to describe the scope of conditions from REBs evaluating an international thromboprophylaxis trial. We generated survey items through literature review and investigators' discussions, creating 4 domains: respondent and institutional demographics, the REB application process, and alternate consent models. We conducted a document analysis that involved duplicate assessment of themes from REB critique of the protocol and informed consent forms (ICF). Approval was granted from 65 REB institutions, requiring 58 unique applications. We analyzed 44 (75.9%) of 58 documents and surveys. Survey respondents completing the applications had 8 (5-12) years of experience; 77% completed 4 or more REB applications in previous 5 years. Critical care personnel were represented on 54% of REBs. The time to approval was a median (interquartile range) of 75 (42, 150) days, taking longer for sites with national research consortium membership (89.1 vs 31.0 days, P = .03). Document analysis of the application process and ICF yielded 5 themes: methodology, data management, consent procedures, cataloguing, and miscellaneous. Protocol-specific themes focused on trial implementation, external critiques, and budget. The only theme specific to the ICF was risks and benefits. The most frequent comments on the protocol and ICF were about methodology and miscellaneous issues; ICF comments also addressed study risks and benefits. More studies on methods to enhance efficiency and consistency of the REB approval processes for clinical trials are needed while still maintaining high ethical standards. Copyright © 2012 Elsevier Inc. All rights reserved.

  6. 23 CFR 140.606 - Project agreements.

    Science.gov (United States)

    2010-04-01

    ... Reimbursement for Bond Issue Projects § 140.606 Project agreements. Project Agreements, Form PR-2, shall be... 23 Highways 1 2010-04-01 2010-04-01 false Project agreements. 140.606 Section 140.606 Highways... projects. 1 The text of FHWA Form PR-2 is found in 23 CFR part 630, subpart C, appendix A. ...

  7. 78 FR 22020 - Agency Information Collection Activities: Requests for Comments; Clearance of New Approval of...

    Science.gov (United States)

    2013-04-12

    ... Control Number: 2120-XXXX. Title: Safety Awareness, Feedback, and Evaluation (SAFE) Program. Form Numbers: No FAA forms are associated with this collection. Type of Review: Clearance of a new information... Activities: Requests for Comments; Clearance of New Approval of Information Collection: Safety Awareness...

  8. Safety review and approval process for the TFTR

    International Nuclear Information System (INIS)

    Levine, J.D.; Howe, H.J.; Howe, K.E.

    1983-01-01

    The design, construction, and operation of the Tokamak Fusion Test Reactor (TFTR) has undergone an extensive safety and enviromental analysis involving Princeton Plasma Physics Laboratory (PPPL), the U.S. Department of Energy (DOE), the Ebasco/Grumman Industrial Subcontractor Team, and other organizations. This analysis, which is continuing during the TFTR operational phase, has been facilitated by the preparation, review and approval of several documents, including an Environmental Statement (Draft and Final), a Preliminary Safety Analysis Report (PSAR), a Final Safety Analysis Report (FSAR), Operations Safety Requirements (OSRs) and Safety Requirements (SRs), and various Operating and Maintenance Manuals. Through TFTR Safety Group participation in formal system design evaluations, change control boards, and reviews of project procurement and installation documentation, the TFTR Management Configuration Control System assures that all aspects of the project, including proposed design, installation and operational changes, receive prompt and thorough safety analyses. These efforts will continue as the TFTR Program moves into the neutral beam and D-T operational phases. The safety review and approval experience that has been acquired on the TFTR Project should serve as a foundation for similar efforts on future fusion devices

  9. 19 CFR 115.41 - Certificate of approval for containers approved after manufacture.

    Science.gov (United States)

    2010-04-01

    ... after manufacture. 115.41 Section 115.41 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT... PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115.41 Certificate of approval for containers approved after manufacture. The Certifying Authority shall...

  10. RCA's regional industrial project

    International Nuclear Information System (INIS)

    Ali, A.T.

    1988-01-01

    The Regional Cooperation Agreement (RCA) for Research Development and Training Related to Nuclear Science and Technology, formulated under the auspices of the International Atomic Energy Agency (IAEA), came into force in June 1972. The overall objective of RCA is to promote technical cooperation among the developing and developed countries in the Asia Pacific region in the peaceful uses of nuclear energy and related technology. Currently, the biggest project under RCA is the Regional Project on the Industrial Applications of Isotopes and Radiation Technology for Asia and the Pacific. The project was established in 1982 for a period of five years and was completed in December 1986. The first phase of the project has generated a high degree of awareness on the industrial potential of isotopes and radiation technology throughout the region; produced a cadre of trained manpower in all areas covered by the project; identified the expertise available in the region; and developed in the region, a unique network of people and institutions involved with the utilization of isotope and radiation technology. A Phase II of the project, which cover all but one of the sub-projects under Phase I, was approved in early 1987 for another five years until 1991. (Nogami, K.)

  11. E-Approval Plans in Research Libraries

    Science.gov (United States)

    Pickett, Carmelita; Tabacaru, Simona; Harrell, Jeanne

    2014-01-01

    Research libraries have long invested in approval plan services, which offer an economical way to acquire scholarly and scientific publications. Traditional approval plans have evolved and now enable libraries to expand their e-book offerings to better serve researchers. Publishers offer a myriad of e-book purchasing options. These range from…

  12. 48 CFR 2922.103-4 - Approvals.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Approvals. 2922.103-4 Section 2922.103-4 Federal Acquisition Regulations System DEPARTMENT OF LABOR SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Basic Labor Policies 2922.103-4 Approvals. The “agency...

  13. 38 CFR 21.7220 - Course approval.

    Science.gov (United States)

    2010-07-01

    ...) VOCATIONAL REHABILITATION AND EDUCATION All Volunteer Force Educational Assistance Program (Montgomery GI...; Pub. L. 98-525) (b) Course approval criteria. In administering benefits payable under 38 U.S.C...) Section 21.4265—Practical training approved as institutional training or on-job training; (10) Section 21...

  14. Ordinal Position, Approval Motivation, and Interpersonal Attraction

    Science.gov (United States)

    Nowicki, Stephen, Jr.

    1971-01-01

    Results of the study suggest that birth-order effects might be included within the wider framework of approval-dependency theory. Females tend to account for a significant share of birth-order effects. More particularly, firstborn females accounted for much of the differences in expressed attraction as well as need for social approval. (Author)

  15. How to Improve the Likelihood of CDM Approval?

    DEFF Research Database (Denmark)

    Brandt, Urs Steiner; Svendsen, Gert Tinggaard

    2014-01-01

    How can the likelihood of Clean Development Mechanism (CDM) approval be improved in the face of institutional shortcomings? To answer this question, we focus on the three institutional shortcomings of income sharing, risk sharing and corruption prevention concerning afforestation/reforestation (A....../R). Furthermore, three main stakeholders are identified, namely investors, governments and agents in a principal-agent model regarding monitoring and enforcement capacity. Developing countries such as West Africa have, despite huge potentials, not been integrated in A/R CDM projects yet. Remote sensing, however...

  16. Evaluation of rubber modified asphalt demonstration projects

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    As part of the Ontario Government's medium-term scrap tire management strategy, 11 rubber modified asphalt demonstration projects were funded or completed, with 13 additional projects from small to large (1,500-65,000 passenger tire equivalents) approved for the 1993 paving season. This report presents the results of an August to November 1993 study of the 11 demonstration projects. The evaluation included a description of the technology; technical review of the projects; economic analysis; review of the environmental literature; environmental review of the projects; comparison of the projects with similar ones in other jurisdictions; and recommendations. Detailed information on asphalt technology is included in an appendix.

  17. 7 CFR 91.102 - Form of official identification symbols.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Form of official identification symbols. 91.102... LABORATORY TESTING PROGRAMS SERVICES AND GENERAL INFORMATION Designation of Approved Symbols for Identification of Commodities Officially Tested By AMS § 91.102 Form of official identification symbols. Two...

  18. 78 FR 73819 - Information Collection; Financial Information Security Request Form

    Science.gov (United States)

    2013-12-09

    ... DEPARTMENT OF AGRICULTURE Forest Service Information Collection; Financial Information Security..., Financial Information Security Request Form. DATES: Comments must be received in writing on or before... Information Security Request Form. OMB Number: 0596-0204. Expiration Date of Approval: 02/28/2014. Type of...

  19. Test procedure forms for sludge retrieval and packaging

    International Nuclear Information System (INIS)

    Feigenbutz, L.V.

    1994-01-01

    This document provides test procedure forms for sludge retrieval and packaging tests in the 305 Cold Test Facility. The completed and approved forms provide all descriptions, criteria and analysis to safely perform sludge equipment tests in the 305 Cold Test Facility

  20. Project Notes

    Science.gov (United States)

    School Science Review, 1978

    1978-01-01

    Presents sixteen project notes developed by pupils of Chipping Norton School and Bristol Grammar School, in the United Kingdom. These Projects include eight biology A-level projects and eight Chemistry A-level projects. (HM)

  1. Visualizations as Projection Devices

    DEFF Research Database (Denmark)

    Harty, Chris; Holm Jacobsen, Peter; Tryggestad, Kjell

    The aim of this paper is to inquire into the role of project visualizations in shaping healthcare spaces and practices. The study draws upon an ethnographic field study from a large on-going hospital construction project in Denmark, and focuses on the early phases of on-boarding the design team...... into the project organization. During the on-boarding visualizations multiplies in form, content and purpose, ranging from paper and digitally based projections of clinical work spaces and practices for the future hospital building in use, to paper and digitally based projections of the cost budget and time...

  2. 78 FR 13375 - Information Collection Request Sent to the Office of Management and Budget (OMB) for Approval...

    Science.gov (United States)

    2013-02-27

    ... enjoyable visitor experience at a reasonable rate. Organizational structure and history. Experience with... Opportunities, 36 CFR 51. Service Form Number: None. Type of Request: Extension of a currently approved...

  3. Considerations, clues and challenges: Gaining Ethical and Trust research approval when using the NHS as a research setting

    Energy Technology Data Exchange (ETDEWEB)

    Jonker, Leon, E-mail: leon.jonker@cumbria.ac.uk [Faculty of Health and Wellbeing, University of Cumbria, Lancaster LA1 3JD (United Kingdom); Research and Development Department, North Cumbria University Hospitals NHS Trust, Carlisle CA2 7HY (United Kingdom); Cox, Diane; Marshall, Gill [Faculty of Health and Wellbeing, University of Cumbria, Lancaster LA1 3JD (United Kingdom)

    2011-08-15

    Substantial changes have been made in recent years to the process of obtaining ethical and research governance approval for research projects in the NHS. The advent of the Integrated Research Application System (IRAS) has streamlined the process, providing a single point of entry. Ethical approval gained in one part of the country is now valid throughout the UK. The previous process of gaining research governance approval in NHS Trusts was maligned and it has been overhauled with the introduction of the National Institute of Health Research (NIHR) Coordinated System for gaining NHS Permission. In addition to updating the reader about the new processes around gaining ethical and Trust approval for research within an NHS setting, essential research project documentation needed for submission are discussed. The aspects of a proposal that Ethics Committees and Trust R and D Departments consider when reviewing applications are highlighted. The implemented changes to the research approval processes will mostly benefit large multi-centre studies; small scale unfunded studies and student projects are potentially at risk of being marginalised in the quest for a streamlined ethics and NHS Trust research governance approval process. However, researchers' familiarity with the approval system should minimise rejection rates and delays.

  4. Considerations, clues and challenges: Gaining Ethical and Trust research approval when using the NHS as a research setting

    International Nuclear Information System (INIS)

    Jonker, Leon; Cox, Diane; Marshall, Gill

    2011-01-01

    Substantial changes have been made in recent years to the process of obtaining ethical and research governance approval for research projects in the NHS. The advent of the Integrated Research Application System (IRAS) has streamlined the process, providing a single point of entry. Ethical approval gained in one part of the country is now valid throughout the UK. The previous process of gaining research governance approval in NHS Trusts was maligned and it has been overhauled with the introduction of the National Institute of Health Research (NIHR) Coordinated System for gaining NHS Permission. In addition to updating the reader about the new processes around gaining ethical and Trust approval for research within an NHS setting, essential research project documentation needed for submission are discussed. The aspects of a proposal that Ethics Committees and Trust R and D Departments consider when reviewing applications are highlighted. The implemented changes to the research approval processes will mostly benefit large multi-centre studies; small scale unfunded studies and student projects are potentially at risk of being marginalised in the quest for a streamlined ethics and NHS Trust research governance approval process. However, researchers' familiarity with the approval system should minimise rejection rates and delays.

  5. An approved personal dosimetry service based on an electronic dosimeter

    International Nuclear Information System (INIS)

    Marshall, T.O.; Bartlett, D.T.; Burgess, P.H.; Campbell, J.I.; Hill, C.E.; Pook, E.A.; Sandford, D.J.

    1991-01-01

    At the Second Conference on Radiation Protection and Dosimetry a paper was presented which, in part, announced the development of an electronic dosimeter to be undertaken in the UK by the National Radiological Protection Board (NRPB) and Siemens Plessey Controls Ltd. This dosimeter was to be of a standard suitable for use as the basis of an approved personal dosimetry service for photon and beta radiations. The project has progressed extremely well and dosimeters and readers are about to become commercially available. The system and the specification of the dosimeter are presented. The NRPB is in the process of applying for approval by the Health and Safety Executive (HSE) to operate as personal monitoring service based on this dosimeter. As part of the approval procedure the dosimeter is being type tested and is also undergoing an HSE performance test and wearer trials. The tests and the wearer trials are described and a summary of the results to date presented. The way in which the service will be organized and operated is described and a comparison is made between the running of the service and others based on passive dosimeters at NRPB

  6. A viewpoint on the approval context of strategic environmental assessments

    International Nuclear Information System (INIS)

    Kontić, Branko; Kontić, Davor

    2012-01-01

    A reflection on the last report from the Commission to the Council, the European Parliament, the European Economic and Social Committee and the Committee of the Regions on the application and effectiveness of the Directive on Strategic Environmental Assessment (SEA) is provided. It covers the inadequacies of the approval/permitting context of SEA, which appears to be increasingly applied by a significant number of Member States in recent years. A viewpoint is provided on the main deficiencies of such praxis. As a practical defence of the planning context of SEA, the authors propose that the EC should consider a clear recommendation to Member States to cease performing SEA in the approval/permitting context until proper amendments to the SEA Directive are made and implemented. - Highlights: ► Administrative and permitting context of SEA, has ousted the primary environmental impact assessment goal. ► The approval context moves from the environmental protection to the area of political power and economy. ► SEA and EIA are misused. ► Environmental evaluations should be used for improving the projects/plans/programmes and not for permitting them.

  7. 30 CFR 14.10 - Post-approval product audit.

    Science.gov (United States)

    2010-07-01

    ..., AND APPROVAL OF MINING PRODUCTS REQUIREMENTS FOR THE APPROVAL OF FLAME-RESISTANT CONVEYOR BELTS General Provisions § 14.10 Post-approval product audit. (a) Approved conveyor belts will be subject to... based. MSHA will select an approved conveyor belt to be audited; the selected belt will be...

  8. Analysis of the Education Program Approval Process: A Program Evaluation.

    Science.gov (United States)

    Fountaine, Charles A.; And Others

    A study of the education program approval process involving the Veterans Administration (VA) and the State Approving Agencies (SAAs) had the following objectives: to describe the present education program approval process; to determine time and costs associated with the education program approval process; to describe the approval process at…

  9. In-use vs. type-approval fuel consumption of current passenger cars in Europe

    International Nuclear Information System (INIS)

    Ntziachristos, L.; Mellios, G.; Tsokolis, D.; Keller, M.; Hausberger, S.; Ligterink, N.E.; Dilara, P.

    2014-01-01

    In-use fuel consumption data of 924 passenger cars (611 petrol, 313 diesel) were collected from various European sources and were evaluated in comparison to their corresponding type-approval values. The analysis indicated that the average in-use fuel consumption was higher than the type-approval one by 11% for petrol cars and 16% for diesel cars. Comparison of this dataset with the Travelcard database in the Netherlands showed that the deviation increased for late model years and in particular for cars with low type-approval values. The deviation was higher than 60% for vehicles registered in 2012 within the 90–100 gCO 2 /km bin. Unrealistic vehicle resistances used in type-approval were identified as one of the prime reasons of the difference. A simplified linear model developed in the study may be used to predict in-use fuel consumption based on data publicly available. The model utilizes the fuel consumption measured in type-approval, the mass, and the engine capacity to provide in-use fuel consumption. This may be either used to correct fuel consumption factors currently utilized by emission models (e.g. COPERT, HBEFA, VERSIT+, and others) or could be used independently to make projections on how fuel consumption may develop on the basis of changing future passenger cars characteristics. - Highlights: • In-use fuel consumption of petrol and diesel passenger cars is 11% and 16% higher than type-approval, respectively. • The relative difference between in-use and type-approval increases for late model and vehicles with low consumption. • Unrealistically low vehicle resistances are identified as a prime reason of low type-approval fuel consumption. • A model developed predicts in-use consumption on the basis of type-approval consumption, vehicle mass, and engine capacity

  10. 49 CFR 611.13 - Overall project ratings.

    Science.gov (United States)

    2010-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION... to enter into preliminary engineering, final design, or FFGAs. (c) These ratings will be used to: (1) approve advancement of a proposed project into preliminary engineering and final design; (2) Approve...

  11. Impressive Words: Linguistic Predictors of Public Approval of the U.S. Congress

    Science.gov (United States)

    Decter-Frain, Ari; Frimer, Jeremy A.

    2016-01-01

    What type of language makes the most positive impression within a professional setting? Is competent/agentic language or warm/communal language more effective at eliciting social approval? We examined this basic social cognitive question in a real world context using a “big data” approach—the recent record-low levels of public approval of the U.S. Congress. Using Linguistic Inquiry and Word Count (LIWC), we text analyzed all 123+ million words spoken by members of the U.S. House of Representatives during floor debates between 1996 and 2014 and compared their usage of various classes of words to their public approval ratings over the same time period. We found that neither agentic nor communal language positively predicted public approval. However, this may be because communion combines two disparate social motives (belonging and helping). A follow-up analysis found that the helping form of communion positively predicted public approval, and did so more strongly than did agentic language. Next, we conducted an exploratory analysis, examining which of the 63 standard LIWC categories predict public approval. We found that the public approval of Congress was highest when politicians used tentative language, expressed both positive emotion and anxiety, and used human words, numbers, prepositions, numbers, and avoided conjunctions and the use of second-person pronouns. These results highlight the widespread primacy of warmth over competence as the primary dimensions of social cognition. PMID:26941691

  12. Impressive Words: Linguistic Predictors of Public Approval of the U.S. Congress.

    Science.gov (United States)

    Decter-Frain, Ari; Frimer, Jeremy A

    2016-01-01

    What type of language makes the most positive impression within a professional setting? Is competent/agentic language or warm/communal language more effective at eliciting social approval? We examined this basic social cognitive question in a real world context using a "big data" approach-the recent record-low levels of public approval of the U.S. Congress. Using Linguistic Inquiry and Word Count (LIWC), we text analyzed all 123+ million words spoken by members of the U.S. House of Representatives during floor debates between 1996 and 2014 and compared their usage of various classes of words to their public approval ratings over the same time period. We found that neither agentic nor communal language positively predicted public approval. However, this may be because communion combines two disparate social motives (belonging and helping). A follow-up analysis found that the helping form of communion positively predicted public approval, and did so more strongly than did agentic language. Next, we conducted an exploratory analysis, examining which of the 63 standard LIWC categories predict public approval. We found that the public approval of Congress was highest when politicians used tentative language, expressed both positive emotion and anxiety, and used human words, numbers, prepositions, numbers, and avoided conjunctions and the use of second-person pronouns. These results highlight the widespread primacy of warmth over competence as the primary dimensions of social cognition.

  13. Impressive Words: Linguistic Predictors of Public Approval of the U.S. Congress

    Directory of Open Access Journals (Sweden)

    Ari eDecter-Frain

    2016-02-01

    Full Text Available What type of language makes the most positive impression within a professional setting? Is competent/agentic language or warm/communal language more effective at eliciting social approval? We examined this basic social cognitive question in a real world context using a big data approach—the recent record-low levels of public approval of the U.S. Congress. Using Linguistic Inquiry and Word Count (LIWC, we text analyzed all 123+ million words spoken by members of the U.S. House of Representatives during floor debates between 1996-2014 and compared their usage of various classes of words to their public approval ratings over the same time period. We found that neither agentic nor communal language positively predicted public approval. However, this may be because communion combines two disparate social motives (belonging and helping. A follow-up analysis found that the helping form of communion positively predicted public approval, and did so more strongly than did agentic language. Next, we conducted an exploratory analysis, examining which of the 63 standard LIWC categories predict public approval. We found that the public approval of Congress was highest when politicians used tentative language, expressed both positive emotion and anxiety, and used human words, numbers, prepositions, numbers, and avoided conjunctions and the use of second-person pronouns. These results highlight the widespread primacy of warmth over competence as the primary dimensions of social cognition.

  14. New marine science organization formed

    Science.gov (United States)

    Wooster, Warren S.

    A new international organization, the North Pacific Marine Science Organization (PICES) will be established to promote and coordinate marine scientific research in the northern North Pacific Ocean and the Berlin Sea. This was decided in Ottawa on December 12, 1990, when a draft convention was approved by representatives of Canada, China, Japan, the United States, and the Soviet Union. PICES will focus on research on the ocean environment and its interactions with land and atmosphere, its role and response to global weather and climate change, its flora, fauna and ecosystems, its uses and resources, and impacts upon it from human activities. Such studies relate not only to the effects of fishing and environmental change on fish stocks but also to such issues as the impacts of oil spills and other forms of pollution and the eventual consequences of climate change for uses of the ocean and its resources.

  15. 30 CFR 18.95 - Approval of machines constructed of components approved, accepted or certified under Bureau of...

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Approval of machines constructed of components... APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Field Approval of Electrically Operated Mining Equipment § 18.95 Approval of machines constructed of components approved...

  16. Microwave solidification project overview

    Energy Technology Data Exchange (ETDEWEB)

    Sprenger, G.

    1993-01-01

    The Rocky Flats Plant Microwave Solidification Project has application potential to the Mixed Waste Treatment Project and the The Mixed Waste Integrated Program. The technical areas being addressed include (1) waste destruction and stabilization; (2) final waste form; and (3) front-end waste handling and feed preparation. This document covers need for such a program; technology description; significance; regulatory requirements; and accomplishments to date. A list of significant reports published under this project is included.

  17. Microwave solidification project overview

    International Nuclear Information System (INIS)

    Sprenger, G.

    1993-01-01

    The Rocky Flats Plant Microwave Solidification Project has application potential to the Mixed Waste Treatment Project and the The Mixed Waste Integrated Program. The technical areas being addressed include (1) waste destruction and stabilization; (2) final waste form; and (3) front-end waste handling and feed preparation. This document covers need for such a program; technology description; significance; regulatory requirements; and accomplishments to date. A list of significant reports published under this project is included

  18. Classifying IS Project Problems

    DEFF Research Database (Denmark)

    Munk-Madsen, Andreas

    2006-01-01

    The literature contains many lists of IS project problems, often in the form of risk factors. The problems sometimes appear unordered and overlapping, which reduces their usefulness to practitioners as well as theoreticians. This paper proposes a list of criteria for formulating project problems...

  19. 27 CFR 5.55 - Certificates of label approval.

    Science.gov (United States)

    2010-04-01

    ..., DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF DISTILLED SPIRITS Requirements for Approval of... certificates of label approval and certificates of exemption from label approval, as well as appeal procedures...

  20. 7 CFR 1780.41 - Loan or grant approval.

    Science.gov (United States)

    2010-01-01

    ... Sheet” or a financial statement or audit that includes a balance sheet; (4) Form RD 442-14, “Association Project Fund Analysis”; (5) “Letter of Conditions”; (6) Form RD 1942-46, “Letter of Intent to Meet...

  1. 33 CFR 211.13 - Approval of the Office of the Chief of Engineers.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Approval of the Office of the Chief of Engineers. 211.13 Section 211.13 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN CONNECTION WITH CIVIL WORKS PROJECTS Disposal of Real Estate...

  2. 76 FR 28121 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2011-05-13

    ... fencing. Acquire radio equipment for emergency operations center. Interactive employee training system... survey and wildlife assessment. Decision Date: March 17, 2011. FOR FURTHER INFORMATION CONTACT: Lori...: Aircraft rescue and firefighting facility. Determination: The approval of this project is limited to the...

  3. 78 FR 76382 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2013-12-17

    ... Airports District Office, (701) 323-7390. PUBLIC AGENCY: Greater Orlando Aviation Authority, Orlando... meet the requirements of 14 CFR 158.15(b). BRIEF DESCRIPTION OF PROJECT PARTIALLY APPROVED FOR... and replacement of emergency generators for the baggage handling system do not meet the requirements...

  4. 42 CFR 403.306 - Additional requirements for State systems-mandatory approval.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Additional requirements for State systems-mandatory approval. 403.306 Section 403.306 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS SPECIAL PROGRAMS AND PROJECTS Recognition of State...

  5. 78 FR 46314 - Request for Revision of a Currently Approved Information Collection

    Science.gov (United States)

    2013-07-31

    ... development and job creation projects such as business start-up costs, business expansion, community... DEPARTMENT OF AGRICULTURE Rural Business-Cooperative Service Request for Revision of a Currently Approved Information Collection AGENCY: Rural Business-Cooperative Service, USDA. ACTION: Notice; proposed...

  6. 75 FR 27286 - Notice of Request for Revision of a Currently Approved Information Collection

    Science.gov (United States)

    2010-05-14

    ... development and job creation projects such as business start-up costs, business expansion, community... DEPARTMENT OF AGRICULTURE Rural Business-Cooperative Service Notice of Request for Revision of a Currently Approved Information Collection AGENCY: Rural Business-Cooperative Service, USDA. ACTION: Proposed...

  7. Protection of third parties by collateral clauses of plan approvals or licenses

    International Nuclear Information System (INIS)

    Badura, P.

    1989-01-01

    This contribution discusses the regulatory functions of collateral clauses of plan approvals or licences, the legal protection of the constitutional and other rights of third parties in connection with the licensing of installations or similar projects, infringements of such rights and means of defence, and protection of neighbours under public law against noise. (RST) [de

  8. Form 6 - gas balancing agreement

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    In 1988, a special Committee of the Rocky Mountain Mineral Law Foundation undertook a project to draft a model from gas balancing agreement. This project was initiated at the request of a number of Foundation members who felt that a model form gas balancing agreement would facilitate the negotiation of operating agreement, since gas balancing issues had become sticking points in the process. The Committee was composed of attorneys representing a wide cross-section of the oil and gas industry including both major and independent oil companies, production companies with interstate pipeline affiliates, and private practitioners. The Committee attempted to address the more controversial issues in gas balancing with optional provisions in the Form. To facilitate the negotiation process, the number of optional provisions was minimized. This form may be used as an Appendix to the new A.A.P.L. Form 610-1989 Model Form Operating Agreement. This book includes provision of this Form which are: Ownership of gas production; Balancing of production accounts; Cash balancing upon depletion; Deliverability tests; Nominations; Statements; Payment of taxes; Operating expenses; Overproducing allowable; Payment of leasehold burdens; Operator's liability; Successors and assigns; Audits; Arbitration; and Operator's fees

  9. FDA approves efavirenz. Food and Drug Administration.

    Science.gov (United States)

    Highleyman, L

    1998-10-01

    The Food and Drug Administration (FDA) approved DuPont Pharma's new non-nucleoside reverse transcriptase inhibitor (NNRTI) efavirenz (Sustiva, DMP-266). Efavirenz has shown promise in trials with over 2000 participants for up to 24 weeks, and early data suggests it may be as effective as protease inhibitors when used in a combination regimen. It is the first anti-HIV drug approved for once-daily dosing. Efavirenz is well tolerated, and the main side effects reported are dizziness, insomnia, abnormal dreams, and skin rash. Efavirenz has been approved for adults and children, but should not be used by pregnant women. Contact information is provided.

  10. Perspectives used for gaining approval of budgets.

    Science.gov (United States)

    Franks-Joiner, G L

    1990-01-01

    Nurse executives think about problems using a certain perspective which may influence decisions on budgetary matters. The nurse executives' perspective used in decision-making may influence which budget proposals are developed and approved. A study was performed to determine the perspective used by nurse executives in decision-making on supplementary budget item proposals and whether perspective use influenced approval. Findings showed that use of the system view or dual-domain perspective in a proposal may enhance nurse executives' changes of gaining approval.

  11. 76 FR 13423 - Notice of Submission of Proposed Information Collection to OMB; Contractor's Requisition-Project...

    Science.gov (United States)

    2011-03-11

    ... Proposed Information Collection to OMB; Contractor's Requisition--Project Mortgages AGENCY: Office of the.... Contractor's monthly application for distribution of insured mortgage proceeds for construction costs... Following Information Title of Proposal: Contractor's Requisition--Project Mortgages. OMB Approval Number...

  12. 50 CFR 84.49 - What if the project costs more or less than originally expected?

    Science.gov (United States)

    2010-10-01

    ... monies for approved coastal wetland grants will be subject to the entire review process along with new grants. Any monies left over after the project is complete, or if the project is not completed, should be...

  13. Evaluating the Status Approvals about Cinema (1989 to 2009

    Directory of Open Access Journals (Sweden)

    Elahe Dehghan Pishe

    2012-06-01

    Full Text Available The present study aimed to study and evaluate the state approvals in the field of The cabinet approval in mentioned period 1989 to 2009 in Iran. cinema from which keywords related to cinema is shown in their titles or texts will form this The method of this research is content analysis and the instrument used .research is a checklist with r= 0.91 using Scott formula. The content analysis checklist was constructed based on the model which classified arts policies into four types namely: facilitator, patron, architect and engineer. The findings revealed that in the investigated twenty-year process. the various states having come in 4-year intervals have been different in using the types of arts policies. The state in the first and second presidency of Akbar Hashemi Rafsanjani used the facilitator and engineer types; in the first presidency of Mohammad Khatami used the patron and architect types, in his second presidency the architect type; and finally in the first presidency of Mahmoud Ahmadinejad used the architect and engineer types more than the other types. Although there has been a difference between the types of arts policy in the cinema approvals in different periods of presidency. the architect and engineer types of arts policies have been used more than the facilitator and patron types.

  14. The Environmental and Molecular Sciences Laboratory project -- Continuous evolution in leadership

    International Nuclear Information System (INIS)

    Knutson, D.E.; McClusky, J.K.

    1994-10-01

    The Environmental and Molecular Sciences Laboratory (EMSL) construction project at Pacific Northwest Laboratory (PNL) in Richland, Washington, is a $230M Major Systems Acquisition for the US Department of Energy (DOE). The completed laboratory will be a national user facility that provides unparalleled capabilities for scientists involved in environmental molecular science research. This project, approved for construction by the Secretary of Energy in October 1993, is underway. The United States is embarking on an environmental cleanup effort that dwarfs previous scientific enterprise. Using current best available technology, the projected costs of cleaning up the tens of thousands of toxic waste sites, including DOE sites, is estimated to exceed one trillion dollars. The present state of scientific knowledge regarding the effects of exogenous chemicals on human biology is very limited. Long term environmental research at the molecular level is needed to resolve the concerns, and form the building blocks for a structure of cost effective process improvement and regulatory reform

  15. The Environmental and Molecular Sciences Laboratory project -- Continuous evolution in leadership

    Energy Technology Data Exchange (ETDEWEB)

    Knutson, D.E.; McClusky, J.K.

    1994-10-01

    The Environmental and Molecular Sciences Laboratory (EMSL) construction project at Pacific Northwest Laboratory (PNL) in Richland, Washington, is a $230M Major Systems Acquisition for the US Department of Energy (DOE). The completed laboratory will be a national user facility that provides unparalleled capabilities for scientists involved in environmental molecular science research. This project, approved for construction by the Secretary of Energy in October 1993, is underway. The United States is embarking on an environmental cleanup effort that dwarfs previous scientific enterprise. Using current best available technology, the projected costs of cleaning up the tens of thousands of toxic waste sites, including DOE sites, is estimated to exceed one trillion dollars. The present state of scientific knowledge regarding the effects of exogenous chemicals on human biology is very limited. Long term environmental research at the molecular level is needed to resolve the concerns, and form the building blocks for a structure of cost effective process improvement and regulatory reform.

  16. Approving of personal dosimeter services

    International Nuclear Information System (INIS)

    Bergman, K.; Malmqvist, L.

    2001-09-01

    The Swedish regulation SSI FS 98:5 requires that radiological workers of category A use dosemeters from an approved personal dosimetry service. The regulation also includes certain specific dosimeter requirements, which are based on those presented in the Technical Recommendations by the European Commission (Report EUR 14852 EN, 1994). All services have been tested for their ability to determine Hp(10) and some of them to determine Hp(0.07) at one radiation quality. The test was performed in the interval 0.2 mSv to 100 mSv at three different dose equivalents unknown to the system owner. The 11 services operating in Sweden at the moment use 5 different types of dosimeters. The five unique systems have been tested regarding the angular and energy dependence of the response of the dosimeters. The dosimeters were irradiated to a personal dose equivalent of about 1 mSv at three photon energies and at four angles (0, 20, 40 and 60 deg. resp. ) both vertically and horizontally rotated. Only 2 of the services determine Hp(0.07) for beta and gamma radiation and were tested for this quantity. The test results for Hp(10) are all except two within the trumpet curve. For the unique systems it is shown that the uncertainty related to angular response at a specified energy is within the required ±40 % except for the lowest X-ray quality at 40 kV. The response is more dependent on photon energy than on the direction of the photon radiation and the choice of radiation quality for the calibration is of great importance for the system performance

  17. 14 CFR 152.109 - Project eligibility: Airport planning.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Project eligibility: Airport planning. 152....109 Project eligibility: Airport planning. (a) Airport master planning. A proposed project for airport master planning is not approved unless— (1) The location of the existing or proposed airport is included...

  18. 5 CFR 470.315 - Project modification and extension.

    Science.gov (United States)

    2010-01-01

    ... provisions of approved project plans will not be modified, duplicated in organizations not listed in the... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Project modification and extension. 470... PERSONNEL MANAGEMENT RESEARCH PROGRAMS AND DEMONSTRATIONS PROJECTS Regulatory Requirements Pertaining to...

  19. 5 CFR 470.313 - Project implementation regulations.

    Science.gov (United States)

    2010-01-01

    ... project must be approved by OPM and shall have full force and authority pursuant to Title VI of the Civil... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Project implementation regulations. 470... PERSONNEL MANAGEMENT RESEARCH PROGRAMS AND DEMONSTRATIONS PROJECTS Regulatory Requirements Pertaining to...

  20. 75 FR 29803 - Agency Information Collection Activity Seeking OMB Approval

    Science.gov (United States)

    2010-05-27

    ... Turbine Engine Powered Airplanes. Type of Request: Extension without change of a currently approved....S. EPA pollution requirements in lieu of searching through extensive paper records. ADDRESSES...

  1. 49 CFR 633.27 - Implementation of a project management plan.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Implementation of a project management plan. 633... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.27 Implementation of a project management plan. (a) Upon approval of a project management plan by...

  2. 77 FR 70780 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2012-11-27

    ... requirements or power calculations that justify the proposed sample size, the expected response rate, methods... notice. Proposed Project Generic Clearance for the Collection of Qualitative Feedback on Agency Service... Collection of Qualitative Feedback on Agency Service Delivery'' to OMB for approval under the Paperwork...

  3. 78 FR 54729 - Reports, Forms, and Record Keeping Requirements

    Science.gov (United States)

    2013-09-05

    ... cell phones and texting while driving; attitudes and perceptions about distracted driving; knowledge of..., 1200 New Jersey Avenue SE., W46-498, Washington, DC 20590. Dr. Johnson's phone number is 202-366-2755... information: Title--NHTSA Distracted Driving Survey Project. Type of Request--Revision of previously approved...

  4. 76 FR 55735 - Reports, Forms, and Record Keeping Requirements

    Science.gov (United States)

    2011-09-08

    ... will conduct one type of qualitative research. This research project will consist of two (2) focus... the following methods: Federal eRulemaking Portal: Go to http://www.regulations.gov . Follow the... OMB Title: Monroney Label Consumer Research. Requested Expiration Date of Approval: Three years from...

  5. Influence of the economy crisis on project cost management

    Science.gov (United States)

    Simankina, Tatyana; Ćetković, Jasmina; Verstina, Natalia; Evseev, Evgeny

    2017-10-01

    Economy crisis significantly affects primarily the project cost management. The article considers the problems of project management in the field of housing under conditions of economy crisis. Project budgets are reduced, their mutual interference grows and framework of risks changes. Apparently, specific approaches are required to be developed to optimize the expenses and guarantee the project implementation within the approved budget. There is considered domestic and foreign experience in terms of project cost management with involvement of BIM technologies.

  6. Remedial action and waste disposal project - ERDF readiness evaluation plan

    International Nuclear Information System (INIS)

    Casbon, M.A.

    1996-06-01

    This Readiness Evaluation Report presents the results of the project readiness evaluation to assess the readiness of the Environmental Restoration and Disposal Facility. The evaluation was conducted at the conclusion of a series of readiness activities that began in January 1996. These activities included completion of the physical plant; preparation, review, and approval of operating procedures; definition and assembly of the necessary project and operational organizations; and activities leading to regulatory approval of the plant and operating plans

  7. Harmonic Maass forms and mock modular forms

    CERN Document Server

    Bringmann, Kathrin; Ono, Ken

    2017-01-01

    Modular forms and Jacobi forms play a central role in many areas of mathematics. Over the last 10-15 years, this theory has been extended to certain non-holomorphic functions, the so-called "harmonic Maass forms". The first glimpses of this theory appeared in Ramanujan's enigmatic last letter to G. H. Hardy written from his deathbed. Ramanujan discovered functions he called "mock theta functions" which over eighty years later were recognized as pieces of harmonic Maass forms. This book contains the essential features of the theory of harmonic Maass forms and mock modular forms, together with a wide variety of applications to algebraic number theory, combinatorics, elliptic curves, mathematical physics, quantum modular forms, and representation theory.

  8. 34 CFR 75.250 - Project period can be up to 60 months.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Project period can be up to 60 months. 75.250 Section... Are Made Approval of Multi-Year Projects § 75.250 Project period can be up to 60 months. The Secretary may approve a project period of up to 60 months. (Authority: 20 U.S.C. 1221e-3 and 3474) [45 FR 22497...

  9. Drugs Approved for Stomach (Gastric) Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for stomach (gastric) cancer. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  10. Drugs Approved for Gastrointestinal Stromal Tumors

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for gastrointestinal stromal tumors (GIST). The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  11. Drugs Approved for Colon and Rectal Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for use in colon cancer and rectal cancer. The list includes generic names, brand names, and common drug combinations, which are shown in capital letters.

  12. Drugs Approved for Soft Tissue Sarcoma

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for soft tissue sarcoma. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  13. Drugs Approved for Head and Neck Cancer

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for head and neck cancer. The list includes generic names and brand names. The drug names link to NCI’s Cancer Drug Information summaries.

  14. Drugs Approved for Gestational Trophoblastic Disease

    Science.gov (United States)

    This page lists cancer drugs approved by the Food and Drug Administration (FDA) for gestational trophoblastic disease. The list includes generic names and brand names. The drug names link to NCI's Cancer Drug Information summaries.

  15. FDA Approves First Therapeutic Cancer Vaccine

    Science.gov (United States)

    Sipuleucel-T (Provenge) is a relatively nontoxic treatment option for men with hormone-resistant or castration-resistant prostate cancer. The FDA's approval of the vaccine represented the first proof of principle that immunotherapy can work in cancer.

  16. 19 CFR 115.42 - Approval plates.

    Science.gov (United States)

    2010-04-01

    ... possible methods of accomplishing this are: (1) Placing an “X” in front of the numeric portion of the... element of such number. The specific method of altering the approval number may be established by each...

  17. Page | 133 LEGISLATIVE APPROVAL OF EXECUTIVE ...

    African Journals Online (AJOL)

    Fr. Ikenga

    NAUJILJ 9 (2) 2018. Page | 133 ... Keywords: Executive appointments, Legislative approval, National Assembly, Constitutional duty. 1. ... Representatives is led by a Speaker.6 The election of the leadership of the senate is entirely the affair of.

  18. Expansion program is a challenging project

    International Nuclear Information System (INIS)

    Walker, G.L.

    1992-01-01

    This paper reports that construction is set to begin on the $1.5 billion PGT-PG and E Pipeline Expansion Project. It will consist of 691 miles of 42-in pipeline and 110 miles of 36-in. pipeline, to be built over 2 years. The project, which will transport additional supplies of natural gas to US West Coast markets, has its US regulatory approval in hand. On Oct. 16, 1991, the Federal Energy Regulatory Commission authorized Pacific Gas Transmission Co. to construct its Pacific Northwest segment of the expansion. Pacific Gas and Electric Co. received approval to build its California segment in late 1990 from the California Public Utilities Commission

  19. Marion Industrial Substation project

    International Nuclear Information System (INIS)

    1992-04-01

    Consumers Power, Inc. (CPI), proposes to construct a new distribution substation under the existing Bonneville Power Administration (BPA) Albay-Lebanon transmission line near the city of Albany in Linn County, Oregon. BPA is proposing to grant a new Point of Delivery to CPI at this substation. The purpose of the project is to serve the developing industrial needs in the Marion Industrial Park and on the 550 acres of nearby land within CPI's service area that are zoned for residential use. CPI prepared, and the Rural Electrification Administration (REA) has approved a Borrower's Environmental Report (BER) which addresses this action along with several other proposed projects in the CPI service area. Portions of this BER are summarized in this brief EA. BPA is preparing its own EA since Department of Energy National Environmental Policy Act (NEPA) guidelines require additional environmental concerns to be addressed than are required by REA's NEPA guidelines

  20. Sample management implementation plan: Salt Repository Project

    International Nuclear Information System (INIS)

    1987-01-01

    The purpose of the Sample Management Implementation Plan is to define management controls and building requirements for handling materials collected during the site characterization of the Deaf Smith County, Texas, site. This work will be conducted for the US Department of Energy Salt Repository Project Office (SRPO). The plan provides for controls mandated by the US Nuclear Regulatory Commission and the US Environmental Protection Agency. Salt Repository Project (SRP) Sample Management will interface with program participants who request, collect, and test samples. SRP Sample Management will be responsible for the following: (1) preparing samples; (2) ensuring documentation control; (3) providing for uniform forms, labels, data formats, and transportation and storage requirements; and (4) identifying sample specifications to ensure sample quality. The SRP Sample Management Facility will be operated under a set of procedures that will impact numerous program participants. Requesters of samples will be responsible for definition of requirements in advance of collection. Sample requests for field activities will be approved by the SRPO, aided by an advisory group, the SRP Sample Allocation Committee. This document details the staffing, building, storage, and transportation requirements for establishing an SRP Sample Management Facility. Materials to be managed in the facility include rock core and rock discontinuities, soils, fluids, biota, air particulates, cultural artifacts, and crop and food stuffs. 39 refs., 3 figs., 11 tabs

  1. Report, realized on behalf of the foreign Affairs, the Defense and the Armed Forces Commission: - on the law project, carried by the Senate, authorizing the approval of the amendment for the 16 september 1987 Montreal protocol relative to the substances which impoverish the ozone layer, adopted at Montreal the 17 september 1997; - and on the law project, carried by the Senate, authorizing the approval of the amendment for the 16 september 1987 Montreal protocol relative to the substances which impoverish the ozone layer, adopted at Pekin the 3 december 1999

    Energy Technology Data Exchange (ETDEWEB)

    Guillet, J.J.

    2003-07-01

    The document presents the text of the law projects concerning the substances which impoverish the ozone layer. Facts of science,protection systems and the two amendments adopted at Montreal in 1997 and Pekin in 1999 are discussed. For each countries data on the substances impoverish the ozone layer, are also given. (A.L.B.)

  2. On good ETOL forms

    DEFF Research Database (Denmark)

    Skyum, Sven

    1978-01-01

    This paper continues the study of ETOL forms and good EOL forms done by Maurer, Salomaa and Wood. It is proven that binary very complete ETOL forms exist, good synchronized ETOL forms exist and that no propagating or synchronized ETOL form can be very complete.......This paper continues the study of ETOL forms and good EOL forms done by Maurer, Salomaa and Wood. It is proven that binary very complete ETOL forms exist, good synchronized ETOL forms exist and that no propagating or synchronized ETOL form can be very complete....

  3. 78 FR 4858 - Agency Information Collection Activities: Immigrant Petition for Alien Workers, Form I-140...

    Science.gov (United States)

    2013-01-23

    ...-0015] Agency Information Collection Activities: Immigrant Petition for Alien Workers, Form I-140... Approved Collection. (2) Title of the Form/Collection: Immigrant Petition for Alien Worker. (3) Agency form... other for-profit. The information furnished on Form I-140 will be used by USCIS to classify aliens under...

  4. 20 CFR 703.110 - Other forms of endorsements and policies.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Other forms of endorsements and policies. 703... Insurance Carriers § 703.110 Other forms of endorsements and policies. Where the form of endorsement prescribed by § 703.109 is not appropriate when used in conjunction with a form of policy approved for use by...

  5. Project of law authorizing the approval of the protocol at the convention of November 27, 1992 dealing with the creation of an international indemnification fund for the damages due to the pollution by hydrocarbons; Projet de loi autorisant l'approbation du protocole a la convention du 27 novembre 1992 portant creation d'un fonds international d'indemnisation pour les dommages dus a la pollution par les hydrocarbures

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-04-01

    A series of recent tanker-ship wrecks has shown the insufficiency of the international indemnification fund (FIPOL 71) created in December 18, 1971 by the international maritime organization for victims of oil spill damages. The total available amount of the fund was raised to about 160 million euros by the protocols adopted in 1992, but despite this improvement, the fund remained far below the real damage costs of the recent maritime catastrophes. For this reason, a new protocol has been created which implements a complementary fund which can mobilize an additional amount of about 662 million euros. This new protocol has also redefined the rules of the financial participation of the contracting states. The present document is a project of law authorizing the approval of this protocol by France. It recalls the historical events that led to its creation, the changes added with respect to the previous protocol and its juridical framework inside the European Community. The text of the new protocol is attached. (J.S.)

  6. Spray-formed tooling

    Science.gov (United States)

    McHugh, K. M.; Key, J. F.

    The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be designed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

  7. New Organizational Forms and IT

    OpenAIRE

    Schwarzer, Bettina;Zerbe, Stefan;Krcmar, Helmut

    2014-01-01

    The availability of powerful IT/IS is percieved as a driving force as well as a necessary prerequisite for new organizational solutions. However, even though the close interre-latedness of organizational structure and IT/IS has been widely recognized for a long time, a thorough understanding of their linkage is still missing. The research project NOF (New Organizational Forms) aims at closing the gap between the organizational and IS discipline in order to further the understanding and provid...

  8. Image forming apparatus

    DEFF Research Database (Denmark)

    2005-01-01

    An image H(x, y) for displaying a target image G(x, y) is displayed on a liquid-crystal display panel and illumination light from an illumination light source is made to pass therethrough to form an image on a PALSLM. Read light hv is radiated to the PALSLM and a phase-modulated light image alpha...... (x, y) read out of the PALSLM is subjected to Fourier transform by a lens. A phase contrast filter gives a predetermined phase shift to only the zero-order light component of Fourier light image alpha f(x, y). The phase-shifted light image is subjected to inverse Fourier transform by a lens...... to project an output image O(x, y) to an output plane. A light image O'(x, y) branched by a beam sampler is picked up by a pickup device and an evaluation value calculating unit evaluates conformity between the image O(x, y) and the image G(x, y).; A control unit performs feedback control of optical...

  9. Permitting plan for Project W-340, Tank 241-C-106 manipulator retrieval arm

    International Nuclear Information System (INIS)

    Tollefson, K.S.

    1995-01-01

    This document describes the regulatory requirements and describes alternative strategies for obtaining permits and approvals for Project W-340, Tank 241-C-106 Manipulator Retrieval Arm. A comprehensive review of environmental regulations has indicated that several environmental reviews, permits, and approvals are required before design, construction, and operation of the facility. The environmental reviews, permits, and approvals, as well the regulatory authority potentially applicable to the Project W-340 Long Reach Manipulator Arm include the following: National Environmental Policy Act of 1969 -- US Department of Energy, Headquarters; State Environmental Policy Act of 1971 -- State of Washington Department of Ecology; Air Permitting; Dangerous Waste Permitting; Miscellaneous Reviews/Permits/Approvals. This document describes the environmental reviews, permits, and approval requirements for the project. It provides a summary of permit application data requirements, alternative strategies for permit completion and approval, as well as the estimated probability of success for each alternative strategy

  10. Define Project

    DEFF Research Database (Denmark)

    Munk-Madsen, Andreas

    2005-01-01

    "Project" is a key concept in IS management. The word is frequently used in textbooks and standards. Yet we seldom find a precise definition of the concept. This paper discusses how to define the concept of a project. The proposed definition covers both heavily formalized projects and informally...... organized, agile projects. Based on the proposed definition popular existing definitions are discussed....

  11. Project Management

    DEFF Research Database (Denmark)

    Project Management Theory Meets Practice contains the proceedings from the 1st Danish Project Management Research Conference (DAPMARC 2015), held in Copenhagen, Denmark, on May 21st, 2015.......Project Management Theory Meets Practice contains the proceedings from the 1st Danish Project Management Research Conference (DAPMARC 2015), held in Copenhagen, Denmark, on May 21st, 2015....

  12. 40 CFR 52.2352 - Change to approved plan.

    Science.gov (United States)

    2010-07-01

    ... Utah's approved State Implementation Plan (SIP). This rule language pertains to State Sales Tax... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Change to approved plan. 52.2352... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Utah § 52.2352 Change to approved...

  13. Applicant's guide related to requests of shipping approval and of acceptance of parcel models or radioactive products aimed at civilian use transported on public road - Guide nr 7 - Index 0, release of the 07/04/2009

    International Nuclear Information System (INIS)

    2009-01-01

    This guide presents the recommendations made by the ASN to applicants in order to facilitate approval requests and shipping approvals related to the transportation of radioactive products. After a recall of the legal context, these recommendations address the documents to be provided in support of an approval request or of a shipping approval, the content of the safety file, the instruction delay, the approval certificate, and changes brought to the parcel model. Appendices contain issues raised by expertise based on experiences, the European PDSR (Package Design Safety Report), and a model for the elaboration of a certificate project

  14. Project Management

    DEFF Research Database (Denmark)

    Pilkington, Alan; Chai, Kah-Hin; Le, Yang

    2015-01-01

    This paper identifies the true coverage of PM theory through a bibliometric analysis of the International Journal of Project Management from 1996-2012. We identify six persistent research themes: project time management, project risk management, programme management, large-scale project management......, project success/failure and practitioner development. These differ from those presented in review and editorial articles in the literature. In addition, topics missing from the PM BOK: knowledge management project-based organization and project portfolio management have become more popular topics...

  15. Project financing

    International Nuclear Information System (INIS)

    Cowan, A.

    1998-01-01

    Project financing was defined ('where a lender to a specific project has recourse only to the cash flow and assets of that project for repayment and security respectively') and its attributes were described. Project financing was said to be particularly well suited to power, pipeline, mining, telecommunications, petro-chemicals, road construction, and oil and gas projects, i.e. large infrastructure projects that are difficult to fund on-balance sheet, where the risk profile of a project does not fit the corporation's risk appetite, or where higher leverage is required. Sources of project financing were identified. The need to analyze and mitigate risks, and being aware that lenders always take a conservative view and gravitate towards the lowest common denominator, were considered the key to success in obtaining project financing funds. TransAlta Corporation's project financing experiences were used to illustrate the potential of this source of financing

  16. Electroweak form factors

    International Nuclear Information System (INIS)

    Singh, S.K.

    2002-01-01

    The present status of electroweak nucleon form factors and the N - Δ transition form factors is reviewed. Particularly the determination of dipole mass M A in the axial vector form factor is discussed

  17. Project descriptions

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    This part specifies the activities and project tasks of each project broken down according to types of financing, listing the current projects Lw 1 through 3 funded by long-term provisions (budget), the current projects LB 1 and 2, LG 1 through 5, LK1, LM1, and LU 1 through 6 financed from special funds, and the planned projects ZG 1 through 4 and ZU 1, also financed from special funds. (DG) [de

  18. 13 CFR 108.470 - SBA approval of merger, consolidation, or reorganization of NMVC Company.

    Science.gov (United States)

    2010-01-01

    ... BUSINESS ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM Changes in Ownership, Structure, or Control Change in Structure of Nmvc Company § 108.470 SBA approval of merger, consolidation, or reorganization of NMVC Company. You may not merge, consolidate, change form of organization (corporation or...

  19. 13 CFR 107.470 - SBA approval of merger, consolidation, or reorganization of Licensee.

    Science.gov (United States)

    2010-01-01

    ... BUSINESS ADMINISTRATION SMALL BUSINESS INVESTMENT COMPANIES Changes in Ownership, Control, or Structure of Licensee; Transfer of License Change in Structure of Licensee § 107.470 SBA approval of merger..., change form of organization (corporation or partnership) or reorganize without SBA's prior written...

  20. 75 FR 30481 - Jacksonville Bancorp, Inc., Jacksonville, IL; Approval of Conversion Application

    Science.gov (United States)

    2010-06-01

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-42: OTS No. H-4706] Jacksonville..., 2010, the Office of Thrift Supervision approved the application of Jacksonville Bancorp, MHC, and Jacksonville Savings Bank, Jacksonville, Illinois, to convert to the stock form of organization. Copies of the...

  1. 75 FR 61246 - Kaiser Federal Financial Group, Inc., Covina, CA; Approval of Conversion Application

    Science.gov (United States)

    2010-10-04

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-51: OTS No. H-4729] Kaiser Federal... September 28, 2010, the Office of Thrift Supervision approved the application of K-Fed Mutual Holding Company and Kaiser Federal Bank, Covina, California, to convert to the stock form of organization. Copies...

  2. 75 FR 51167 - Northfield Bancorp, Inc., Staten Island, NY; Approval of Conversion Application

    Science.gov (United States)

    2010-08-18

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-47: OTS No. H-4732] Northfield Bancorp..., 2010, the Office of Thrift Supervision approved the application of Northfield Bancorp, MHC and Northfield Bank, Staten Island, New York, to convert to the stock form of organization. Copies of the...

  3. 75 FR 28685 - Colonial Bankshares, MHC, Vineland, NJ; Approval of Conversion Application

    Science.gov (United States)

    2010-05-21

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-41: OTS Nos. 04983, H-3879, and H-4714... May 14, 2010, the Office of Thrift Supervision approved the application of Colonial Bankshares, MHC, and Colonial Bank, Vineland, New Jersey, to convert to the stock form of organization. Copies of the...

  4. 75 FR 28685 - Oritani Financial Corp., MHC, Township of Washington, NJ; Approval of Conversion Application

    Science.gov (United States)

    2010-05-21

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-39: OTS Nos. H-2944 and H-4701... hereby given that on May 10, 2010, the Office of Thrift Supervision approved the application of Oritani Financial Corp., MHC, and Oritani Bank, Township of Washington, New Jersey, to convert to the stock form of...

  5. 75 FR 31511 - Peoples Federal Bancshares, Inc., Brighton, MA; Approval of Conversion Application

    Science.gov (United States)

    2010-06-03

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-45: OTS No. H-4715] Peoples Federal..., 2010, the Office of Thrift Supervision approved the application of Peoples Federal MHC and Peoples Federal Savings Bank, Brighton, Massachusetts, to convert to the stock form of organization. Copies of the...

  6. 76 FR 9636 - Franklin Financial Corporation, Inc., Glen Allen, VA; Approval of Conversion Application

    Science.gov (United States)

    2011-02-18

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-59: OTS No. H-4761] Franklin Financial... 11, 2011, the Office of Thrift Supervision approved the application of Franklin Financial Corporation MHC and Franklin Federal Savings Bank, Glen Allen, Virginia, to convert to the stock form of...

  7. 75 FR 70363 - Minden Bancorp, Inc., Minden, LA; Approval of Conversion Application

    Science.gov (United States)

    2010-11-17

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-53: OTS No. H-4756] Minden Bancorp..., the Office of Thrift Supervision approved the application of Minden Mutual Holding Company and MBL Bank, Minden, Louisiana, to convert to the stock form of organization. Copies of the application are...

  8. 75 FR 71187 - Atlantic Coast Financial Corporation, Waycross, GA; Approval of Conversion Application

    Science.gov (United States)

    2010-11-22

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-56 OTS No. H-4438] Atlantic Coast... November 12, 2010, the Office of Thrift Supervision approved the application of Atlantic Coast Federal, MHC and Atlantic Coast Bank, Waycross, Georgia, to convert to the stock form of organization. Copies of...

  9. 75 FR 70081 - Home Federal Bancorp, Inc., Shreveport, LA; Approval of Conversion Application

    Science.gov (United States)

    2010-11-16

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-52: OTS No. H-4749] Home Federal... 5, 2010, the Office of Thrift Supervision approved the application of Home Federal Mutual Holding Company of Louisiana and Home Federal Bank, Shreveport, Louisiana, to convert to the stock form of...

  10. 75 FR 28686 - FedFirst Financial Corporation, Monessen, PA; Approval of Conversion Application

    Science.gov (United States)

    2010-05-21

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-40: OTS No. H-4708] FedFirst Financial... Office of Thrift Supervision approved the application of FedFirst Financial MHC and First Federal Savings Bank, Monessen, Pennsylvania, to convert to the stock form of organization. Copies of the application...

  11. 76 FR 41864 - Home Federal Savings and Loan Association, Ashland, KY; Approval of Conversion Application

    Science.gov (United States)

    2011-07-15

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-24 OTS Nos. 04246 and H4776] Home Federal Savings and Loan Association, Ashland, KY; Approval of Conversion Application Notice is hereby... Savings and Loan Association, Ashland, Kentucky, to convert to the stock form of organization. Copies of...

  12. 77 FR 66196 - Self-Regulatory Organizations; Options Clearing Corporation; Order Approving Proposed Rule Change...

    Science.gov (United States)

    2012-11-02

    ... Accounting Principles (``GAAP''). Canadian clearing members that use Form 1 report the same, and in some... Organizations; Options Clearing Corporation; Order Approving Proposed Rule Change Relating to Financial... financial reporting by Canadian clearing members to reflect the Investment Industry Regulatory Organization...

  13. 78 FR 76310 - Agency Information Collection Activities: Submission to OMB for Review and Approval; Public...

    Science.gov (United States)

    2013-12-17

    ... collection will also provide information on CHWs' efforts to enroll clients and the successes and failures... forms; and 3. Client satisfaction surveys. ORHP is seeking approval from OMB for the three methods of... designed to gather information on successes and challenges associated with the program design and...

  14. 78 FR 22021 - Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of...

    Science.gov (United States)

    2013-04-12

    ..., page 71473. FAA Form 7480-1 (Notice of Landing Area Proposal) is used to collect information about any... Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Notice of Landing... information collection. The Federal Register Notice with a 60-day comment period soliciting [[Page 22022...

  15. 78 FR 58512 - Notice of Request for Extension of Approval of an Information Collection; Swine Health

    Science.gov (United States)

    2013-09-24

    ... respondent increased because more swine are being moved due to changes in production practices and..., a Permit to Move Restricted Animals (VS Form 1-27), a certificate of veterinary inspection (CVI), an... moved to slaughter in a means of conveyance sealed with an official seal. Since the last approval of...

  16. 77 FR 37063 - Agency Information Collection Activities: Extension, Without Change, of a Currently Approved...

    Science.gov (United States)

    2012-06-20

    ... information technology, e.g., permitting electronic submission of responses. Overview of This Information... additional information should be directed to: John Ramsay, Program (Forms) Manager, U.S. Immigration and... Information Collection Activities: Extension, Without Change, of a Currently Approved Collection; Comment...

  17. 76 FR 67004 - Order Approving Filing Fees for Exempt Reporting Advisers and Private Fund Advisers

    Science.gov (United States)

    2011-10-28

    ... billion or more in hedge fund assets, combined liquidity fund and registered money market fund assets or...] Order Approving Filing Fees for Exempt Reporting Advisers and Private Fund Advisers Section 204(c) of... funds (a ``private fund adviser'') to file proposed Form PF on a periodic basis.\\2\\ On September 30...

  18. 77 FR 15755 - Agency Information Collection Activities: Announcement of Board Approval Under Delegated...

    Science.gov (United States)

    2012-03-16

    ... Reports Report title: Consolidated Financial Statements for Bank Holding Companies. Agency form number: FR... operations. The FR Y-9C consists of standardized financial statements similar to the Federal Financial..., supporting statements and approved collection of information instruments are placed into OMB's public docket...

  19. 78 FR 27936 - Request for Extension and Revision of a Currently Approved Information Collection With Additional...

    Science.gov (United States)

    2013-05-13

    ..., or auditing services. Such information includes; the name and location of the person or company..., mechanical, or other technological collection techniques or other forms of information technology. All... Extension and Revision of a Currently Approved Information Collection With Additional Merge of Additional...

  20. 75 FR 1799 - Agency Information Collection Activities: Accreditation of Commercial Laboratories and Approval...

    Science.gov (United States)

    2010-01-13

    ... information collection be extended with no change to the burden hours. This document is published to obtain... appropriate automated, electronic, mechanical, or other technological techniques or other forms of information... information in deciding whether to approve individuals or businesses desiring to measure bulk products or to...

  1. 75 FR 54654 - Agency Information Collection Activities; Proposals, Submissions, and Approvals

    Science.gov (United States)

    2010-09-08

    ... appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of.... Type of Review: Extension without change of a previously approved collection. Title of Collection.... Affected Public: Businesses or other for-profits, Federal Government. Total Estimated Number of Responses...

  2. What is the Process Approvals for Survey Research in the Department of Defense (DoD)

    Science.gov (United States)

    2017-04-26

    persons as individuals / representatives of agencies that elicit attitudes, opinions, behavior , and related demographic, social, and economic data to...processes are reported to be confusing. The survey approval process between services is inconsistent and time consuming . Barriers, real or perceived...The working group formed as part of the Behavioral Health Research Interest Group

  3. 75 FR 69658 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Science.gov (United States)

    2010-11-15

    ... Activities; Submission to OMB for Review and Approval; Comment Request; Experimental Use Permits (EUPs) for... activity. An Agency may not conduct or sponsor, and a person is not required to respond to, a collection of... instrument or form, if applicable. Abstract: The Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA...

  4. Cerberus, an Access Control Scheme for Enforcing Least Privilege in Patient Cohort Study Platforms : A Comprehensive Access Control Scheme Applied to the GENIDA Project - Study of Genetic Forms of Intellectual Disabilities and Autism Spectrum Disorders.

    Science.gov (United States)

    Parrend, Pierre; Mazzucotelli, Timothée; Colin, Florent; Collet, Pierre; Mandel, Jean-Louis

    2017-11-16

    Cohort Study Platforms (CSP) are emerging as a key tool for collecting patient information, providing new research data, and supporting family and patient associations. However they pose new ethics and regulatory challenges since they cross the gap between patients and medical practitioners. One of the critical issues for CSP is to enforce a strict control on access privileges whilst allowing the users to take advantage of the breadth of the available data. We propose Cerberus, a new access control scheme spanning the whole life-cycle of access right management: design, implementation, deployment and maintenance, operations. Cerberus enables switching from a dual world, where CSP data can be accessed either from the users who entered it or fully de-identified, to an access-when-required world, where patients, practitioners and researchers can access focused medical data through explicit authorisation by the data owner. Efficient access control requires application-specific access rights, as well as the ability to restrict these rights when they are not used. Cerberus is implemented and evaluated in the context of the GENIDA project, an international CSP for Genetically determined Intellectual Disabilities and Autism Spectrum Disorders. As a result of this study, the software is made available for the community, and validated specifications for CSPs are given.

  5. ASEAN projects reviewed.

    Science.gov (United States)

    1980-01-01

    The ASEAN Population Expert Group met in Manila and was followed by a meeting of the ASEAN heads of population programs, during the period November 5-10, 1979. Heads of population programs from Indonesia, Malaysia, Singapore, Thailand, and the Philippines attended. The meetings were held to review progress-to-date on phase 1 projects and to consider the development of an expanded population program. 5 projects funded by UNFPA are reviewed in tabular form with the project, the sponsoring country, date of implementation, data analysis, and date of completion. Suggestions were made for improving and extending these projects and it was also suggested that all projects being developed and proposed should include a section on use of research. 7 new projects were proposed as phase 2 projects. The 1st, sponsored by Malaysia, deals with women in development; project 2, lead by Thailand, will investigate population movement and its effect on development; project 3, led by the Philippines, will develop and strengthen national population information systems and networks in ASEAN countries; project 4, led by Indonesia, is directed towards institutional development and exchanges of personnel; project 5, led by the Philippines, will examine population and development dynamics and the man/resources balance; project 6, led by Thailand, will develop ASEAN social indicators; and project 7, led by Indonesia and Malaysia, will make a comprehensive analysis of existing medical/health care and family planning systems. It was recommended that an executive director of the proposed ASEAN population coordination unit should be appointed to expedite the recommendations of the meeting related to preparation and submission of phase 2 project proposals.

  6. The status of BNFL's MOX project

    International Nuclear Information System (INIS)

    Edwars, John; Cooch, Julian P.; Slater, Michel W.

    2002-01-01

    Full text: In the late 1980s BNFL decided to enter the MOX fuel fabrication business to support our reprocessing business and return the plutonium product to our customers in the useable form of MOX fuel. The first phase of the strategy was to gain some irradiation experience for MOX produced by our own Short Binderless Route (SBR) process. To achieve this the MOX Demonstration Facility (MDF) was built at Sellafield and 28 MOX fuel assemblies were produced up to 1998 that were loaded into PWRs in Europe. In 1994, BNFL started the construction of their large scale MOX production plant, SMP. The design and construction of the plant and supporting facilities was completed some years ago and the commissioning of the plant with uranium commenced around June 1999. In October 2001, the UK Government provided BNFL with the approval to operate SMP with plutonium. On 20 December 2001, the UK Regulators gave BNFL their approval to start plutonium operations. This paper summarises the approach used to commission SMP and describes some of the lessons learnt during the commissioning phase of the project and the start up of the plant with plutonium. An explanation of our experience obtaining a licence to operate the plant is provided together with a description of the changes we have made to ensure that the quality of the product from SMP can be guaranteed. Finally, the paper summarises the experience BNFL has gained during irradiating MOX fuel produced by the SBR process and explains how the data compares with that available for UO2 and supports the in reactor use of MOX fuel made in SMP. (author)

  7. Biowaiver Monographs for Immediate Release Solid Oral Dosage Forms: Proguanil Hydrochloride.

    NARCIS (Netherlands)

    Plöger, Gerlinde F; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D I R K W; Langguth, Peter; Mehta, Mehul U; Parr, Alan; Polli, James E; Shah, Vinod P; Tajiri, Tomokazu; Dressman, Jennifer B

    2018-01-01

    Literature data relevant to the decision to waive in vivo bioequivalence testing for the approval of generic immediate release solid oral dosage forms of proguanil hydrochloride are reviewed. To clarify the Biopharmaceutics Classification System (BCS) classification, experimental solubility and

  8. Subsidy project in fiscal 1999 to accelerate forming an environment harmonizing energy community. Report on the survey on energy supply investigation project by using a wastes electric power generation system in wide city and village area in the Joso area; Joso chiho koiki shichosonken ni okeru haikibutsu hatsuden ni yoru energy kyokyu chosa jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Discussions were given on the feasibility of a project to be performed jointly by the Business Bureau of the Ibaraki Prefectural Government who takes charge of the wastes electric power generation project, and the Joso Area Wide City and Village Area Affair Association who performs refuse disposal project. The basic plan for the system may be summarized as follows: the gasification melting furnace shall have a capacity of 420 tons per day, discharge concentrations of dioxins shall be 0.01 ng-TEQ/m{sup 3} or less, the power generation system shall be the steam high-temperature high-pressure system, the power generation efficiency shall be 25%, and the electric power generation takes priority, with the steam after power generation use utilized for heat supply. The evaluation on the effect of introducing the project can be summarized as follows: in the social aspect, the execution of the joint project is safe and effective for the residents and society; it contributes to activation of the areas and assistance to the regional activities; correspondence will be possible to the tighter enforcement of the laws and regulations in the future; in the environmental aspect, discharge of carbon dioxide, sulfur oxides, and dioxins can be suppressed; and in the economic aspect, the ultimate disposal quantity in refuse treatment will be reduced greatly, serving for saving the treatment expense, and the refuse treatment cost may be reduced by assuring the earning from selling the electric power. (NEDO)

  9. Radiological Medical Device Innovation: Approvals via the Premarket Approval Pathway From 2000 to 2015.

    Science.gov (United States)

    Ghobadi, Comeron W; Hayman, Emily L; Finkle, Joshua H; Walter, Jessica R; Xu, Shuai

    2017-01-01

    The aim of this study was to critically assess the clinical evidence leading to radiologic medical device approvals via the premarket approval pathway from 2000 to 2015. This study used the publically available FDA premarket database for radiologic device approvals over the past 15 years (September 1, 2000, to August 31, 2015). Approval characteristics were collected for each device, and statistical analysis was performed on the data for each pivotal trial. Additionally, methodological quality of the pivotal trial was determined using the Quality Assessment of Diagnostic Accuracy Studies tool. Twenty-three class III radiologic device approvals were identified, with breast imaging accounting for 16 (70%) and computer-aided detection software accounting for 9 (39%) approvals. The median premarket approval time was 475 days (range, 180-1,116). Twenty-one devices were approved on the basis of multireader, multicenter studies, one on the basis of a randomized controlled trial, and one on the basis of a preclinical technical equivalence trial. The median number of patients per pivotal trial was 201 (range, 25-3,946). Twenty-six of the 34 pivotal trials (76%) had at least one methodologic bias. Breast imaging devices had a greater number of patients per pivotal trial (P = .009) and more prospective studies. With regard to all modalities, increased time to device approval correlated with weaker trial quality (r = 0.600, P assessing diagnostic technologies. Given that radiologic devices play a key role in modern medicine, further efforts should be made to increase transparency of clinical data leading to approval. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  10. Project studies

    DEFF Research Database (Denmark)

    Geraldi, Joana; Söderlund, Jonas

    2018-01-01

    Project organising is a growing field of scholarly inquiry and management practice. In recent years, two important developments have influenced this field: (1) the study and practice of projects have extended their level of analysis from mainly focussing on individual projects to focussing on micro......, and of the explanations of project practices they could offer. To discuss avenues for future research on projects and project practice, this paper suggests the notion of project studies to better grasp the status of our field. We combine these two sets of ideas to analyse the status and future options for advancing...... project research: (1) levels of analysis; and (2) type of research. Analysing recent developments within project studies, we observe the emergence of what we refer to as type 3 research, which reconciles the need for theoretical development and engagement with practice. Type 3 research suggests pragmatic...

  11. Integrated project delivery, an alternative to the usual form of construction work in Spain = Métodos colaborativos, un cambio para la construcción en España

    Directory of Open Access Journals (Sweden)

    Miguel Ángel Álvarez

    2017-12-01

    Full Text Available The productivity of the construction sector in Spain is very low, as compared to other economic sectors, as with other countries in our environment. It takes us to a deep reflection on whether we are doing things right and what improvements can we introduce to increase production. These improvements must necessarily be technological and methodological, since there is a good training of the equipment both at the managerial level, as well as at the technical and in most of the labour levels, it is to exploit the full potential of new IT tools, especially Building Information Modelling (BIM and the new methodologies that, from the industry, look for greater efficiency of the process and the elimination of all type of losses, like Lean Construction. A change of mentality, necessary to rethink the way of work in which we have been working for so many centuries, as the only possible paradigm, to replace confrontation as a way of producing construction through collaboration between all the agents involved in the work. We will speak in this article about Integrated Project Delivery (IPD, as one of the Lean methodologies that enable a profound improvement, we will see its definition, its essential components, and how it application can positively influence the construction process in Spain as it has already demonstrated in others. Resumen La productividad del sector de la construcción en España es muy baja, tanto comparativamente con otros sectores económicos, como con la de otros países de nuestro entorno. Se hace necesaria una profunda reflexión sobre si estamos haciendo bien las cosas y qué mejoras podemos introducir para incrementar la producción. Estas mejoras han de ser necesariamente tecnológicas y metodológicas, ya que existe una buena capacitación de los equipos tanto a nivel directivo, como en la escala técnica y en muchos casos en la laboral, es decir, se trata de aprovechar todo el potencial de las nuevas herramientas inform

  12. PROJECT APPROACH TO ENERGY MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Інга Борисівна СЕМКО

    2016-02-01

    Full Text Available Project management is widely used around the world as a tool to improve business performance. Correct implementation of the program of implementation of energy efficiency is accompanied by the adoption of an appropriate legislative framework, support programs, the approval of market-based instruments. Currently, it is paying enough attention to the effective application of market-based instruments, although most of the activities in the field of energy efficiency from the economic side are quite profitable. The authors suggested the use of the methodology of project management to the management of energy-saving measures, new approaches to the place and role of project management in the hierarchy of guidance. As a result, this innovation can improve the competitiveness of enterprises. The conclusions that the energy-saving project management allows you to get the best results for their implementation by reducing the time, resources, risk reduction.

  13. On the projective curvature tensor of generalized Sasakian-space ...

    African Journals Online (AJOL)

    space-forms under some conditions regarding projective curvature tensor. All the results obtained in this paper are in the form of necessary and sufficient conditions. Keywords: Generalized Sasakian-space-forms; projectively flat; ...

  14. Form Filling with Self-Compacting Concrete

    DEFF Research Database (Denmark)

    Thrane, Lars Nyholm

    2002-01-01

    This paper describes a newly started Ph.D. project with the aim of simulating the form filling ability of Self-Compacting Concrete (SCC) taking into account the form geometry, reinforcement configuration, casting technique, and the rheological properties of the concrete. Comparative studies...

  15. APPROVAL OF WASTE TREATMENT AND IMMOBILIZATION PLANT CONTRACTOR-INITIATED AUTHORIZATION BASIS AMENDMENT REQUESTS (ABAR)

    International Nuclear Information System (INIS)

    JONES GL

    2008-01-01

    The objective is to describe the process used by the Office of River Protection (ORP) for evaluating and implementing Contractor-initiated changes to the Waste Treatment and Immobilization Plant (WTP) Authorization Basis (AB). The WTP Project's history has provided a unique challenge for establishing and maintaining an ORP-approved AB during design and construction. Until operations begin, the project cannot implement the classic Unreviewed Safety Question (USQ) process to determine when ORP approval of Contractor-initiated changes is required. A 'quasiUSQ' process has been implemented that defines when AB changes could occur. The three types of AB changes are (1) Limited Scope Changes, (2) Authorization Basis Deviations, and (3) Authorization Basis Amendment Request (ABAR). DOE RL/REG 97-13, 'Office of River Protection Position on Contractor-Initiated Changes to the Authorization Basis', describes the process the WTP Contractor must follow to make changes to the AB, with and without ORP approval. The process uses a 'safety evaluation' process that is similar to the USQ process but at a more qualitative level. The maturation of the WTP Contractor's facility design and activities, and other changing conditions, resulted in a process that allows the Contractor to make changes to the AB without ORP approval; however, those changes that may significantly affect nuclear safety do require ORP approval. This process balances the WTP regulatory principle of efficiency with assurance that adequate safety will not be compromised. The process has reduced the number of ABARs requiring ORP approval and reduced the potential for delays in design and procurement activities

  16. Guyana - How Do You Know Where to Get the Information You Need? Determining Ethics Approval Requirements in a Developing Country

    OpenAIRE

    Gloria Song

    2018-01-01

    Determining the process for obtaining local research ethics approval, or whether such a requirement even exists, may not always be straightforward in the context of some developing countries where such information may not be easily accessible to overseas researchers. How far do a researcher's ethical obligations extend in determining whether there is a requirement for local research ethics approval, and what form this would take (e.g., institutional or centralised ethics review)? In other wor...

  17. Virtual projects

    DEFF Research Database (Denmark)

    Svejvig, Per; Commisso, Trine Hald

    2012-01-01

    that the best practice knowledge has not permeated sufficiently to the practice. Furthermore, the appropriate application of information and communication technology (ICT) remains a big challenge, and finally project managers are not sufficiently trained in organizing and conducting virtual projects....... The overall implications for research and practice are to acknowledge virtual project management as very different to traditional project management and to address this difference.......Virtual projects are common with global competition, market development, and not least the financial crisis forcing organizations to reduce their costs drastically. Organizations therefore have to place high importance on ways to carry out virtual projects and consider appropriate practices...

  18. Project financing

    International Nuclear Information System (INIS)

    Alvarez, M.U.

    1990-01-01

    This paper presents the basic concepts and components of the project financing of large industrial facilities. Diagrams of a simple partnership structure and a simple leveraged lease structure are included. Finally, a Hypothetical Project is described with basic issues identified for discussion purposes. The topics of the paper include non-recourse financing, principal advantages and objectives, disadvantages, project financing participants and agreements, feasibility studies, organization of the project company, principal agreements in a project financing, insurance, and an examination of a hypothetical project

  19. Adaptive municipal electronic forms

    NARCIS (Netherlands)

    Kuiper, Pieternel; van Dijk, Elisabeth M.A.G.; Bondarouk, Tatiana; Ruel, Hubertus Johannes Maria; Guiderdoni-Jourdain, Karine; Oiry, Ewan

    Adaptation of electronic forms (e-forms) seems to be a step forward to reduce the burden for people who fill in forms. Municipalities more and more offer e-forms online that can be used by citizens to request a municipal product or service or by municipal employees to place a request on behalf of a

  20. 76 FR 40774 - Proposed Collection; Comment Request for Form 8621

    Science.gov (United States)

    2011-07-11

    ... 8621, Return by a Shareholder of a Passive Foreign Investment Company or Qualified Electing Fund. DATES... Passive Foreign Investment Company or Qualified Electing Fund. OMB Number: 1545-1002. Form Number: 8621... included in the request for OMB approval. All comments will become a matter of public record. Comments are...