WorldWideScience

Sample records for programs manual chapter

  1. Fire Protection Program Manual

    Energy Technology Data Exchange (ETDEWEB)

    Sharry, J A

    2012-05-18

    This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

  2. Program Management System manual

    International Nuclear Information System (INIS)

    1986-01-01

    The Program Management System (PMS), as detailed in this manual, consists of all the plans, policies, procedure, systems, and processes that, taken together, serve as a mechanism for managing the various subprograms and program elements in a cohesive, cost-effective manner. The PMS is consistent with the requirements of the Nuclear Waste Policy Act of 1982 and the ''Mission Plan for the Civilian Radioactive Waste Management Program'' (DOE/RW-0005). It is based on, but goes beyond, the Department of Energy (DOE) management policies and procedures applicable to all DOE programs by adapting these directives to the specific needs of the Civilian Radioactive Waste Management program. This PMS Manual describes the hierarchy of plans required to develop and maintain the cost, schedule, and technical baselines at the various organizational levels of the Civilian Radioactive Waste Management Program. It also establishes the management policies and procedures used in the implementation of the Program. These include requirements for internal reports, data, and other information; systems engineering management; regulatory compliance; safety; quality assurance; and institutional affairs. Although expanded versions of many of these plans, policies, and procedures are found in separate documents, they are an integral part of this manual. The PMS provides the basis for the effective management that is needed to ensure that the Civilian Radioactive Waste Management Program fulfills the mandate of the Nuclear Waste Policy Act of 1982. 5 figs., 2 tabs

  3. Nuclear criticality safety. Chapter 0530 of AEC manual

    International Nuclear Information System (INIS)

    2006-01-01

    The programme objectives of this chapter of the U.S. Atomic Energy Commission manual on nuclear criticality safety are to protect the health and safety of the public and of the government and contractor personnel working in plants that handle fissionable material and to protect public and private property from the consequences of a criticality accident occurring in AEC-owned plants and other AEC-contracted activities involving fissionable materials

  4. Rural Gas Program manual

    Energy Technology Data Exchange (ETDEWEB)

    1987-11-01

    The intent and purpose of this manual is to describe the various guideliness and administrative procedures associated with the Alberta Rural Gas Program and to consolidate and expand upon the legislation under which the Program has been developed. It is intended primarily for the use and information of rural gas distributors, their agents, and other private or government parties having an interest in the Rural Gas Program. Information is presented on: rural gas franchises, technical applications, contracts and tenders, determination of system capital costs for grant support, grants, Gas Alberta brokerage arrangements, insurance coverage, utility rights-of-way, and lien notes.

  5. Program management system manual

    International Nuclear Information System (INIS)

    1989-08-01

    OCRWM has developed a program management system (PMS) to assist in organizing, planning, directing and controlling the Civilian Radioactive Waste Management Program. A well defined management system is necessary because: (1) the Program is a complex technical undertaking with a large number of participants, (2) the disposal and storage facilities to be developed by the Program must be licensed by the Nuclear Regulatory Commission (NRC) and hence are subject to rigorous quality assurance (QA) requirements, (3) the legislation mandating the Program creates a dichotomy between demanding schedules of performance and a requirement for close and continuous consultation and cooperation with external entities, (4) the various elements of the Program must be managed as parts of an integrated waste management system, (5) the Program has an estimated total system life cycle cost of over $30 billion, and (6) the Program has a unique fiduciary responsibility to the owners and generators of the nuclear waste for controlling costs and minimizing the user fees paid into the Nuclear Waste Fund. This PMS Manual is designed and structured to facilitate strong, effective Program management by providing policies and requirements for organizing, planning, directing and controlling the major Program functions

  6. State Energy Program Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Office of Building Technology, State and Community Programs

    1999-03-17

    The State Energy Program Operations Manual is a reference tool for the states and the program officials at the U.S. Department of Energy's Office of Building Technology, State and Community Programs and Regional Support Offices as well as State Energy Offices. The Manual contains information needed to apply for and administer the State Energy Program, including program history, application rules and requirements, and program administration and monitoring requirements.

  7. DIMAC program user's manual

    International Nuclear Information System (INIS)

    Lee, Byoung Oon; Song, Tae Young

    2003-11-01

    DIMAC (A DIspersion Metallic fuel performance Analysis Code) is a computer program for simulating the behavior of dispersion fuel rods under normal operating conditions of HYPER. It computes the one-dimensional temperature distribution and the thermo-mechanical characteristics of fuel rod under the steady state operation condition, including the swelling and rod deformation. DIMAC was developed based on the experience of research reactor fuel. DIMAC consists of the temperature calculation module, the mechanical swelling calculation module, and the fuel deformation calculation module in order to predict the deformation of a dispersion fuel as a function of power history. Because there are a little of available U-TRU-Zr or TRU-Zr characteristics, the material data of U-Pu-Zr or Pu-Zr are used for those of U-TRU-Zr or TRU-Zr. This report is mainly intended as a user's manual for the DIMAC code. The general description on this code, the description on input parameter, the description on each subroutine, the sample problem and the sample input and partial output are written in this report

  8. DIMAC program user's manual

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byoung Oon; Song, Tae Young

    2003-11-01

    DIMAC (A DIspersion Metallic fuel performance Analysis Code) is a computer program for simulating the behavior of dispersion fuel rods under normal operating conditions of HYPER. It computes the one-dimensional temperature distribution and the thermo-mechanical characteristics of fuel rod under the steady state operation condition, including the swelling and rod deformation. DIMAC was developed based on the experience of research reactor fuel. DIMAC consists of the temperature calculation module, the mechanical swelling calculation module, and the fuel deformation calculation module in order to predict the deformation of a dispersion fuel as a function of power history. Because there are a little of available U-TRU-Zr or TRU-Zr characteristics, the material data of U-Pu-Zr or Pu-Zr are used for those of U-TRU-Zr or TRU-Zr. This report is mainly intended as a user's manual for the DIMAC code. The general description on this code, the description on input parameter, the description on each subroutine, the sample problem and the sample input and partial output are written in this repo0008.

  9. A linear programming manual

    Science.gov (United States)

    Tuey, R. C.

    1972-01-01

    Computer solutions of linear programming problems are outlined. Information covers vector spaces, convex sets, and matrix algebra elements for solving simultaneous linear equations. Dual problems, reduced cost analysis, ranges, and error analysis are illustrated.

  10. Programing Procedures Manual (PPM).

    Science.gov (United States)

    1981-12-15

    terms ’reel’, ’unit’, and ’volume’ are synonymous and completely interchangeable in the CLOSE statement. Treatment of sequential mass storage files is...logically equivalent to the treatment of a file on tape or analogous sequential media. * For the purpose of showing the effect of various types of CLOSE...Overlay Area CA6 Address of Abend Relative to beginning of overlay segment The programer can now refer to the compile source listing for the overlay

  11. Radiological control technician: Training program management manual

    International Nuclear Information System (INIS)

    1992-10-01

    This manual defines and describes the DOE Radiological Control Technician Core Training Program qualification and training process, material development requirements, standards and policies, and administration. The manual applies to Radiological Control Technician Training Programs at all DOE contractor sites

  12. TAP 1, Training Program Manual

    International Nuclear Information System (INIS)

    1991-01-01

    Training programs at DOE nuclear facilities should provide well-trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor nuclear facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically determined job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two companion manuals provide additional information to assist contractors in their efforts to accredit training programs

  13. Home audit program: management manual

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    Many public power systems have initiated home energy audit programs in response to the requests of their consumers. The manual provides smaller public power systems with the information and specific skills needed to design and develop a program of residential energy audits. The program is based on the following precepts: locally owned public systems are the best, and in many cases the only agencies available to organize and coordinate energy conservation programs in many smaller communities; consumers' rights to energy conservation information and assistance should not hinge on the size of the utility that serves them; in the short run, public power systems of all sizes should offer residential energy conservation assistance to their consumers, because such assistance is desirable, necessary, and in the public interest; and in the long run, such programs will complement national energy goals and will produce economic benefits for both consumers and the public power system. A detailed description of home audit program planning, organization, and management are given. (MCW)

  14. Handbook for Classroom Testing in Peace Corps Language Programs. Manual T0068.

    Science.gov (United States)

    Anderson, Neil J.

    This manual provides instructors in Peace Corps language training programs with information about two kinds of classroom testing: formative, ongoing testing and summative testing that occurs at the end of an instructional period. The first of the manual's four chapters on the purposes of language testing, discusses language testing within a…

  15. Packaging and transportation manual. Chapter on the packaging and transportation of hazardous and radioactive waste

    International Nuclear Information System (INIS)

    1998-03-01

    The purpose of this chapter is to outline the requirements that Los Alamos National Laboratory employees and contractors must follow when they package and ship hazardous and radioactive waste. This chapter is applied to on-site, intra-Laboratory, and off-site transportation of hazardous and radioactive waste. The chapter contains sections on definitions, responsibilities, written procedures, authorized packaging, quality assurance, documentation for waste shipments, loading and tiedown of waste shipments, on-site routing, packaging and transportation assessment and oversight program, nonconformance reporting, training of personnel, emergency response information, and incident and occurrence reporting. Appendices provide additional detail, references, and guidance on packaging for hazardous and radioactive waste, and guidance for the on-site transport of these wastes

  16. Packaging and transportation manual. Chapter on the packaging and transportation of hazardous and radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The purpose of this chapter is to outline the requirements that Los Alamos National Laboratory employees and contractors must follow when they package and ship hazardous and radioactive waste. This chapter is applied to on-site, intra-Laboratory, and off-site transportation of hazardous and radioactive waste. The chapter contains sections on definitions, responsibilities, written procedures, authorized packaging, quality assurance, documentation for waste shipments, loading and tiedown of waste shipments, on-site routing, packaging and transportation assessment and oversight program, nonconformance reporting, training of personnel, emergency response information, and incident and occurrence reporting. Appendices provide additional detail, references, and guidance on packaging for hazardous and radioactive waste, and guidance for the on-site transport of these wastes.

  17. Hanford internal dosimetry program manual

    International Nuclear Information System (INIS)

    Carbaugh, E.H.; Sula, M.J.; Bihl, D.E.; Aldridge, T.L.

    1989-10-01

    This document describes the Hanford Internal Dosimetry program. Program Services include administrating the bioassay monitoring program, evaluating and documenting assessments of internal exposure and dose, ensuring that analytical laboratories conform to requirements, selecting and applying appropriate models and procedures for evaluating internal radionuclide deposition and the resulting dose, and technically guiding and supporting Hanford contractors in matters regarding internal dosimetry. 13 refs., 16 figs., 42 tabs

  18. Promoting the APS Chapter Program by sharing its history, best practices, and how-to guide for establishing new chapters.

    Science.gov (United States)

    Hopper, Mari K

    2017-03-01

    Early establishment of physiological societies in Oklahoma and Ohio demonstrated the benefits of networking physiologists and paved the way for establishing the APS Chapter Program. Designed to promote the general objectives of the APS, the Chapter Program was officially launched in 1995, with Ohio being the first recognized chapter. There are 13 active chapters regularly engaged in numerous activities designed to advance physiology education and research. In the hopes that others will recognize the important offerings of state chapters and consider organizing one, the aims for this paper are to 1) share a brief history, 2) provide rationale for chapter initiation, and 3) describe the process involved in establishing a chapter. In light of current changes in American Medical Association and Liaison Committee on Medical Education guidelines, the present time may be critical in promoting chapters, as they play a vital role in sustaining recognition and support for the discipline. Copyright © 2017 the American Physiological Society.

  19. Hanford inventory program user's manual

    International Nuclear Information System (INIS)

    Hinkelman, K.C.

    1994-01-01

    Provides users with instructions and information about accessing and operating the Hanford Inventory Program (HIP) system. The Hanford Inventory Program is an integrated control system that provides a single source for the management and control of equipment, parts, and material warehoused by Westinghouse Hanford Company in various site-wide locations. The inventory is comprised of spare parts and equipment, shop stock, special tools, essential materials, and convenience storage items. The HIP replaced the following systems; ACA, ASP, PICS, FSP, WSR, STP, and RBO. In addition, HIP manages the catalog maintenance function for the General Supplies inventory stocked in the 1164 building and managed by WIMS

  20. Impact Parent Program Workshop Leader's Manual.

    Science.gov (United States)

    Marvelle, John D., Comp.; And Others

    This program manual provides a series of eight two-hour sessions designed to further parents' abilities to teach and communicate with their young children and to build supportive family school relationships. Session I introduces the series and emphasizes the important role parents have as teachers of their children. In Session II an overview of…

  1. Chapter 7. Assessing soil factors in wildland improvement programs

    Science.gov (United States)

    Arthur R. Tiedemann; Carlos F. Lopez

    2004-01-01

    Soil factors are an important consideration for successful wildland range development or improvement programs. Even though many soil improvement and amelioration practices are not realistic for wildlands, their evaluation is an important step in selection of adapted plant materials for revegetation. This chapter presents information for wildland managers on: the...

  2. TAP 3, Training Program Support Manual

    International Nuclear Information System (INIS)

    1991-07-01

    Training programs at DOE facilities should provide well-trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor nuclear facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically determined job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently and effectively meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two companion manuals provide additional information to assist contractors in their efforts to accredit training programs

  3. Getting the Most from Pi Sigma Alpha Chapters: Exploring the Chapter Activity Grant Program and Its Multiplier Effects

    Science.gov (United States)

    Alexander, Robert M.

    2009-01-01

    The political science honor society, Pi Sigma Alpha, has chapters in nearly 700 institutions across the United States. The organization sponsors many programs that can contribute a great deal to students of political science; however, many students are unaware of these opportunities. This article encourages chapter advisors to make use of these…

  4. Finite element program Lamcal. (User's manual)

    International Nuclear Information System (INIS)

    Lamain, L.G.; Blanckenburg, J.F.G.

    1982-01-01

    The present user's manual gives the input formats, job control and an input example for the finite element part of the Lamcal program. The input data have been organized in a more or less self explaining way, using keywords and standard input formats and is printed at the beginning of every run. To simplify the use of the whole program and to avoid unecessary data handling, all three parts of the Lamcal program, meshgeneration, plotting and, FE, are combined into one load module. This setup allows to do all calculations in one single run. However, preprocessing, postprocessing and restarts can be made in separate runs as well. The same reserved space for the dynamic core storage is used in all three parts, if the available space is not sufficient the FE program will stop

  5. Chemical Dependency and Violence: Working with Dually Affected Families. A Cross-Training Program Manual for Counselors and Advocates.

    Science.gov (United States)

    Wright, Janet M.

    This manual is designed as a cross-training program guide for counselors working in the fields of woman abuse and chemical dependency. (A cross-training program is a system for one (or more) agency personnel to train each other in their respective areas of expertise.) Chapter 1 discusses the rationale and goals of a cross-training program; issues…

  6. DOE Radiological Control Manual Core Training Program

    International Nuclear Information System (INIS)

    Scott, H.L.; Maisler, J.

    1993-01-01

    Over the past year, the Department of Energy (DOE) Office of Health (EH-40) has taken a leading role in the development of new standardized radiological control training programs for use throughout the DOE complex. The Department promulgated its Radiological Control (RadCon) Manual in June 1992. To ensure consistent application of the criteria presented in the RadCon Manual, standardized radiological control core training courses and training materials have been developed for implementation at all DOE facilities. In producing local training programs, standardized core courses are to be supplemented with site-specific lesson plans, viewgraphs, student handbooks, qualification standards, question banks, and wallet-sized training certificates. Training programs for General Employee Radiological Training, Radiological Worker I and II Training, and Radiological Control Technician Training have been disseminated. Also, training committees under the direction of the Office of Health (EH-40) have been established for the development of additional core training courses, development of examination banks, and the update of the existing core training courses. This paper discusses the current activities and future direction of the DOE radiological control core training program

  7. Peace Corps Aquaculture Training Manual. Training Manual T0057.

    Science.gov (United States)

    Peace Corps, Washington, DC. Information Collection and Exchange Div.

    This Peace Corps training manual was developed from two existing manuals to provide a comprehensive training program in fish production for Peace Corps volunteers. The manual encompasses the essential elements of the University of Oklahoma program that has been training volunteers in aquaculture for 25 years. The 22 chapters of the manual are…

  8. Buried Waste Program (BWP) data qualification manual

    International Nuclear Information System (INIS)

    Casey, C.; Larson, R.A.; Harris, G.A.

    1989-06-01

    The Data Qualification Manual (DQM) has been developed to discuss the process required to qualify data generated for the Buried Waste Program (BWP). The data from the BWP tasks conducted at the Radioactive Waste Management Complex (RWMC) and elsewhere will lead to remedial decisions being made which are governed by federal regulations administered by the Environmental Protection Agency (EPA). Data qualification is the process of insuring that only data of planned and known qualities are used to make a decision or answer a question. Although it is the Data Integrity Review Committee's (DIRC) responsibility to insure that the quality of all BWP data is ultimately verified and validated, all personnel who participate in the data gathering process will affect the quality of the data and must be responsible for knowing what is required to produce data of the planned quality. Therefore this manual is addressed to all participants in a data-gathering task. This manual discusses requirements to support data qualification in several areas, including: the sampling and analysis plan; data quality objectives and PARCC goals; sample custody documentation; quality assurance; assembly of the data qualification package; and existing data. 23 refs., 4 figs., 6 tabs

  9. Manual of Procedures for Applying for Funding under Title VI, Part B--Education of the Handicapped Act. P.L. 91-230 as Amended by P.L. 93-320, P.L. 94-142 and P.L. 99-457. EHA, Title VI, Part B--Third Year of a Three-Year Plan, 1988-89. ECIA, Chapter 1, Handicapped Preschool Grant Program.

    Science.gov (United States)

    North Carolina State Dept. of Public Instruction, Raleigh. Div. for Exceptional Children.

    The manual presents procedures for local school districts in North Carolina applying for federal funding under Title VI, Part B, Education of the Handicapped Act, as amended by Public Laws 93-320, 94-142, and 99-457. The first chapter gives instructions for submission of amendments for the third year of the 3-year plan and includes an introduction…

  10. FDA (Food and Drug Administration) Compliance Program Guidance Manual (FY 88). Section 4. Medical and radiological devices

    International Nuclear Information System (INIS)

    1988-01-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices

  11. Sandia National Laboratories, California Environmental Management System program manual.

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Barbara L.

    2013-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 436.1.

  12. SNL/CA Environmental Management System Program Manual.

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Barbara L.

    2005-09-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program was developed in accordance with Department of Energy (DOE) Order 450.1 and incorporates the elements of the International Standard on Environmental Management Systems, ISO 14001.

  13. Sandia National Laboratories, California Environmental Management System program manual

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Barbara L.

    2014-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 436.1.

  14. Notification: EPA’s Compliance with Statement of Federal Financial Accounting Standards No. 47 and Treasury Financial Manual, Part 2, Chapter 4700

    Science.gov (United States)

    Project #OA&E-FY18-0249, June 6, 2018. The OIG plans to begin preliminary research on the EPA’s compliance with the Statement of Federal Financial Accounting Standards No. 47: Reporting Entity; and Treasury Financial Manual, Part 2, Chapter 4700

  15. Wien Automatic System Planning (WASP) Package. A computer code for power generating system expansion planning. Version WASP-III Plus. User's manual. Volume 1: Chapters 1-11

    International Nuclear Information System (INIS)

    1995-01-01

    (FIXSYS plants); user control of the distribution of capital cost expenditures during the construction period (if required to be different from the general 'S' curve distribution used as default). The present document has been produced to support use of the WASP-Ill Plus computer code and to illustrate the capabilities of the program. This Manual is organized in two separate volumes. This first one includes 11 main chapters describing how to use the WASP-Ill Plus computer program. Chapter 1 gives a summary description and some background information about the program. Chapter 2 introduces some concepts, mainly related to the computer requirements imposed by the program, that are used throughout the Manual. Chapters 3 to 9 describe how to execute each of the various programs (or modules) of the WASP-Ill Plus package. The description for each module shows the user how to prepare the Job Control statements and input data needed to execute the module and how to interpret the printed output produced. The iterative process that should be followed in order to obtain the 'optimal solution' for a WASP case study is covered in Chapters 6 to 8. Chapter 10 explains the use of an auxiliary program of the WASP package which is mainly intended for saving computer time. Lastly, Chapter 11 recapitulates the use of WASP-Ill Plus for executing a generation expansion planning study; describes the several phases normally involved in this type of study; and provides the user with practical hints about the most important aspects that need to be verified at each phase while executing the various WASP modules

  16. 15 CFR Appendix A to Chapter Xx - Administration of the Trade Agreements Program

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Administration of the Trade Agreements Program A Appendix A to Chapter XX Commerce and Foreign Trade Regulations Relating to Foreign Trade Agreements OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE Ch. XX, App. A Appendix A to Chapter XX...

  17. Hanford Internal Dosimetry Program Manual, PNL-MA-552

    Energy Technology Data Exchange (ETDEWEB)

    Carbaugh, Eugene H.; Bihl, Donald E.; Maclellan, Jay A.

    2009-09-24

    This manual is a guide to the services provided by the Hanford Internal Dosimetry Program (IDP), which is operated by the Pacific Northwest National Laboratory.( ) for the U.S. Department of Energy Richland Operations Office, Office of River Protection and their Hanford Site contractors. The manual describes the roles of and relationships between the IDP and the radiation protection programs of the Hanford Site contractors. Recommendations and guidance are also provided for consideration in implementing bioassay monitoring and internal dosimetry elements of radiation protection programs.

  18. SNL/CA Environmental Management System Program Manual.

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Barbara L.

    2007-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004. Elements of the ISO standard overlap with those of Department of Energy (DOE) Order 450.1, thus SNL/CA's EMS program also meets the DOE requirements.

  19. SAFE users manual. Volume 4. Computer programs

    International Nuclear Information System (INIS)

    Grady, L.M.

    1983-06-01

    Documentation for the Safeguards Automated Facility Evaluation (SAFE) computer programs is presented. The documentation is in the form of subprogram trees, program abstracts, flowcharts, and listings. Listings are provided on microfiche

  20. Instrumentation of a manually programmed neutron diffractometer

    DEFF Research Database (Denmark)

    Hansen, K.B.; Neisig, K.E.

    1966-01-01

    This paper describes essentially the digital part of the instrumentation for a neutron diffractometer in which the measuring procedure is governed by a control unit involving a fixed number of program points. A simultaneously running test program monitors the information transfer from the data...... sources and to the print-out in table form. The experimental conditions must be set by a panel switch selected program, which allows a desired parameter program to be executed....

  1. Highway Safety Program Manual: Volume 3: Motorcycle Safety.

    Science.gov (United States)

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 3 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on aspects of motorcycle safety. The purpose and specific objectives of a State motorcycle safety program are outlined. Federal authority in the highway safety area and general policies…

  2. National Waste Terminal Storage Program, planning and control system manual

    International Nuclear Information System (INIS)

    1976-09-01

    This manual contains a brief description of the NWTS program in order to define the environment within which the system must function; an overview of the system, and the concepts and techniques that were utilized in its development; and OWI implementation on the NWTS Program

  3. The Harwell TAILS computer program user's manual

    International Nuclear Information System (INIS)

    Rouse, K.D.; Cooper, M.J.

    1980-11-01

    The Harwell TAILS computer program is a versatile program for crystal structure refinement through the analysis of neutron or X-ray diffraction data from single crystals or powders. The main features of the program are described and details are given of the data input and output specifications. (author)

  4. XTAL system of crystallographic programs: programmer's manual

    International Nuclear Information System (INIS)

    Hall, S.R.; Stewart, J.M.; Norden, A.P.; Munn, R.J.; Freer, S.T.

    1980-02-01

    This document establishes the basis for collaborative writing of transportable computer programs for x-ray crystallography. The concepts and general-purpose utility subroutines described here can be readily adapted to other scientific calculations. The complete system of crystallographic programs and subroutines is called XTAL and replaces the XRAY (6,7,8) system of programs. The coding language for the XTAL system is RATMAC (5). The XTAL system of programs contains routines for controlling execution of application programs. In this sense it forms a suboperating system that presents the same computational environment to the user and programmer irrespective of the operating system in use at a particular installation. These control routines replace all FORTRAN I/O code, supply character reading and writing, supply binary file reading and writing, serve as a support library for applications programs, and provide for interprogram communication

  5. The program FEM3D users manual

    International Nuclear Information System (INIS)

    Misfeldt, I.

    1977-11-01

    A short description of the program FEM3D that solves the three-dimensional, multigroup, neutron diffusion equation by the finite element method. The elements are box-formed Lagrange type elements of order 1, 2, or 3. The program gives very reliable results within reasonable calculation times, but it is not a fast program and should therefore mostly be used where high precision is needed. (author/BP)

  6. General RMP Guidance - Chapter 8: Emergency Response Program

    Science.gov (United States)

    If you have a Program 2 or 3 process at your facility, 40 CFR Part 68 (risk management program) requires an emergency response program in place if employees respond to some releases involving regulated toxic or flammable substances.

  7. Manual for Preparing Individualized Education Programs.

    Science.gov (United States)

    Baylor, Terrill D.

    Presented are guidelines for developing an individualized program and services plan, an individual implementation plan, and daily activity and strategy plans for handicapped students. Instructions are outlined for utilizing forms related to planning and implementation of individualized education programs. Appended are sample forms. (SBH)

  8. User's manual of program RFIT Pt. 1

    International Nuclear Information System (INIS)

    Szatmary, Z.

    1991-06-01

    The RFIT program system was written for the parameter estimation and evaluation of a reactor physics testing project concerning WWER type reactors. The project between 1972 and 1990 was aimed to measure reactor physics parameters like neutron flux, reactivity, criticality, reactor kinetics variables etc., and was applied to the ZR-6 critical assembly of CRIP, Budapest. The RFIT program system can be used for data handling, data analysis of measurement results, and statistical analysis. This first part is intended to present a general view of the RFIT program, and contains flow charts, list of files, explanation of error messages, input data, nomenclature and subject index. (R.P.)

  9. User's manual of program RFIT Pt. 2

    International Nuclear Information System (INIS)

    Szatmary, Z.

    1991-06-01

    The RFIT program system was written for the parameter estimation and evaluation of a reactor physics testing project concerning WWER type reactors, to measure reactor physics parameters like neutron flux, reactivity, criticality, reactor kinetics variables etc. It was applied for the ZR-6 critical assembly of CRIP, Budapest. This second part contains detailed descriptions of the fitting functions, determination of correction factors, Newton iteration applied for solving least squares equations, error estimation, rules of input preparation for task RFIT, handling spectral ratio measurements (task SPEC), program output connected with parameter estimation. (R.P.)

  10. Material control system simulator program reference manual

    Energy Technology Data Exchange (ETDEWEB)

    Hollstien, R.B.

    1978-01-24

    A description is presented of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts. Although MCSS may be used independently in the design or analysis of material handling and processing systems, it has been tailored toward the determination of material accountability and the response of material control systems to adversary action sequences.

  11. Material control system simulator program reference manual

    International Nuclear Information System (INIS)

    Hollstien, R.B.

    1978-01-01

    A description is presented of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts. Although MCSS may be used independently in the design or analysis of material handling and processing systems, it has been tailored toward the determination of material accountability and the response of material control systems to adversary action sequences

  12. Real-Time Multiprocessor Programming Language (RTMPL) user's manual

    Science.gov (United States)

    Arpasi, D. J.

    1985-01-01

    A real-time multiprocessor programming language (RTMPL) has been developed to provide for high-order programming of real-time simulations on systems of distributed computers. RTMPL is a structured, engineering-oriented language. The RTMPL utility supports a variety of multiprocessor configurations and types by generating assembly language programs according to user-specified targeting information. Many programming functions are assumed by the utility (e.g., data transfer and scaling) to reduce the programming chore. This manual describes RTMPL from a user's viewpoint. Source generation, applications, utility operation, and utility output are detailed. An example simulation is generated to illustrate many RTMPL features.

  13. The RSZ BASIC programming language manual

    Science.gov (United States)

    Stattel, R. J.; Niswander, J. K.; Kochhar, A. K.

    1980-01-01

    The RSZ BASIC interactive language is described. The RSZ BASIC interpreter is resident in the Telemetry Data Processor, a system dedicated to the processing and displaying of PCM telemetry data. A series of working examples teaches the fundamentals of RSZ BASIC and shows how to construct, edit, and manage storage of programs.

  14. Region 8 radiological assistance program team response manual

    International Nuclear Information System (INIS)

    Webb, D.E.

    1997-01-01

    The purpose of this manual is to provide guidance so that a request for radiological assistance is responded to in an effective and consistent manner. These procedures are specific to the trained and qualified members of the Region 8 Radiological Assistance Program (RAP) team. Procedures provide steps for responding to the request, notification and activation of the team members, position descriptions, and checklists

  15. User's manual for computer program BASEPLOT

    Science.gov (United States)

    Sanders, Curtis L.

    2002-01-01

    The checking and reviewing of daily records of streamflow within the U.S. Geological Survey is traditionally accomplished by hand-plotting and mentally collating tables of data. The process is time consuming, difficult to standardize, and subject to errors in computation, data entry, and logic. In addition, the presentation of flow data on the internet requires more timely and accurate computation of daily flow records. BASEPLOT was developed for checking and review of primary streamflow records within the U.S. Geological Survey. Use of BASEPLOT enables users to (1) provide efficiencies during the record checking and review process, (2) improve quality control, (3) achieve uniformity of checking and review techniques of simple stage-discharge relations, and (4) provide a tool for teaching streamflow computation techniques. The BASEPLOT program produces tables of quality control checks and produces plots of rating curves and discharge measurements; variable shift (V-shift) diagrams; and V-shifts converted to stage-discharge plots, using data stored in the U.S. Geological Survey Automatic Data Processing System database. In addition, the program plots unit-value hydrographs that show unit-value stages, shifts, and datum corrections; input shifts, datum corrections, and effective dates; discharge measurements; effective dates for rating tables; and numeric quality control checks. Checklist/tutorial forms are provided for reviewers to ensure completeness of review and standardize the review process. The program was written for the U.S. Geological Survey SUN computer using the Statistical Analysis System (SAS) software produced by SAS Institute, Incorporated.

  16. User's manual of program RFIT Pt. 3

    International Nuclear Information System (INIS)

    Szatmary, Z.

    1991-06-01

    The RFIT program system was written for the parameter estimation and evaluation of a reactor physics testing project concerning WWER type reactors, to measure reactor physics parameters like neutron flux, reactivity, criticality, reactor kinetics variables etc. It was applied for the ZR-6 critical assembly of CRIP, Budapest. This third part contains the description of all files of experimental data: PDF (raw experimental data), EDF (evaluated data), CLIB (calibration factors). In relation of these files, the description includes the information stored, rules of input preparation and of correcting stored data, options available for manipulating the files. (R.P.)

  17. RMP Guidance for Warehouses - Chapter 8: Emergency Response Program

    Science.gov (United States)

    Implementing an emergency response program along with your risk management plan may be required if you have at least one Program 2 or 3 process in place, and if your employees will respond to some releases involving regulated toxic or flammable substances.

  18. Synfuel program analysis. Volume 2: VENVAL users manual

    Science.gov (United States)

    Muddiman, J. B.; Whelan, J. W.

    1980-07-01

    This volume is intended for program analysts and is a users manual for the VENVAL model. It contains specific explanations as to input data requirements and programming procedures for the use of this model. VENVAL is a generalized computer program to aid in evaluation of prospective private sector production ventures. The program can project interrelated values of installed capacity, production, sales revenue, operating costs, depreciation, investment, dent, earnings, taxes, return on investment, depletion, and cash flow measures. It can also compute related public sector and other external costs and revenues if unit costs are furnished.

  19. User's manual of program RFIT Pt. 4

    International Nuclear Information System (INIS)

    Szatmary, Z.

    1991-06-01

    The RFIT program system was written for the parameter estimation and evaluation of a reactor physics testing project concerning WWER type reactors, to measure reactor physics parameters like neutron flux, reactivity, criticality, reactor kinetics variables etc. It was applied for theZR-6 critical assembly of CRIP, Budapest. This fourth part contains the description of task PLOT serving for depicting some results of data evaluation graphically. The graphical plots give some insight into the statistical characteristics of measured data, a feature of RFIT for statistical analysis. The methods described and applied are the point drop method (φ and f test), searching outliers (improved Student test), and tests on probability distributions. (R.P.)

  20. Wien Automatic System Planning (WASP) Package. A computer code for power generating system expansion planning. Version WASP-III Plus. User's manual. Volume 1: Chapters 1-11

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    (FIXSYS plants); user control of the distribution of capital cost expenditures during the construction period (if required to be different from the general 'S' curve distribution used as default). The present document has been produced to support use of the WASP-Ill Plus computer code and to illustrate the capabilities of the program. This Manual is organized in two separate volumes. This first one includes 11 main chapters describing how to use the WASP-Ill Plus computer program. Chapter 1 gives a summary description and some background information about the program. Chapter 2 introduces some concepts, mainly related to the computer requirements imposed by the program, that are used throughout the Manual. Chapters 3 to 9 describe how to execute each of the various programs (or modules) of the WASP-Ill Plus package. (abstract truncated)

  1. FDA (Food and Drug Administration) compliance program guidance manual and updates (FY 86). Section 4. Medical and radiological devices. Irregular report

    International Nuclear Information System (INIS)

    1986-01-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices

  2. Environmental implementation plan: Chapter 5, Chemical management, pollution prevention and other compliance programs

    International Nuclear Information System (INIS)

    Peterson, G.L.

    1993-01-01

    Compliance with environmental regulations and US Department of Energy Orders (DOE) relating to environmental protection is an important part of SRS's program. Over the past few years, the number of environmental regulations has increased. The strategy to comply with new and existing environmental regulations and DOE orders is described in chapter two. In this chapter, the following environmental programs are described: Toxic Substances Control Act (TSCA); Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA); Emergency Planning and Community Right-to-Know Act (EPCRA); and SPCC/BMP/Pollution Prevention Plans;The implementation section identifies issues and those responsible to achieve defined objectives

  3. Chapter 1: Assessing pollinator habitat services to optimize conservation programs

    Science.gov (United States)

    Iovanna, Richard; Ando , Amy W.; Swinton, Scott; Hellerstein, Daniel; Kagan, Jimmy; Mushet, David M.; Otto, Clint R.; Rewa, Charles A.

    2017-01-01

    Pollination services have received increased attention over the past several years, and protecting foraging area is beginning to be reflected in conservation policy. This case study considers the prospects for doing so in a more analytically rigorous manner, by quantifying the pollination services for sites being considered for ecological restoration. The specific policy context is the Conservation Reserve Program (CRP), which offers financial and technical assistance to landowners seeking to convert sensitive cropland back to some semblance of the prairie (or, to a lesser extent, forest or wetland) ecosystem that preceded it. Depending on the mix of grasses and wildflowers that are established, CRP enrollments can provide pollinator habitat. Further, depending on their location, they will generate related services, such as biological control of crop pests, recreation, and aesthetics. While offers to enroll in CRP compete based on cost and some anticipated benefits, the eligibility and ranking criteria do not reflect these services to a meaningful degree. Therefore, we develop a conceptual value diagram to identify the sequence of steps and associated models and data necessary to quantify the full range of services, and find that critical data gaps, some of which are artifacts of policy, preclude the application of benefit-relevant indicators (BRIs) or monetization. However, we also find that there is considerable research activity underway to fill these gaps. In addition, a modeling framework has been developed that can estimate field-level effects on services as a function of landscape context. The approach is inherently scalable and not limited in geographic scope, which is essential for a program with a national footprint. The parameters in this framework are sufficiently straightforward that expert judgment could be applied as a stopgap approach until empirically derived estimates are available. While monetization of benefit-relevant indicators of yield

  4. Cuerpo de Paz Manual de Sistema de Programacion y Capacitacion (Peace Corps Programming and Training System Manual): T0063.

    Science.gov (United States)

    Peace Corps, Washington, DC.

    This Spanish version of the Peace Corps Programming and Training System Manual is designed to help field staff members of the Peace Corps train volunteers. Its task descriptions, guidelines, examples, and definitions are intended to be practical and informative rather than restrictive. The manual is divided into six major sections: (1)…

  5. 48 CFR Appendix I to Chapter 2 - Policy and Procedures for the DOD Pilot Mentor-Protege Program

    Science.gov (United States)

    2010-10-01

    ... the DOD Pilot Mentor-Protege Program I Appendix I to Chapter 2 Federal Acquisition Regulations System... and Procedures for the DOD Pilot Mentor-Protege Program I-100Purpose. (a) This Appendix I to 48 CFR Chapter 2 implements the Pilot Mentor-Protégé Program (hereafter referred to as the “Program”) established...

  6. 75 FR 52976 - Issuance of Revised Users' Manual for Commission Mediation Program for Investigations Under...

    Science.gov (United States)

    2010-08-30

    ... INTERNATIONAL TRADE COMMISSION Issuance of Revised Users' Manual for Commission Mediation Program... 65615 (Nov. 8, 2008). The Commission has determined to issue a revised Users' Manual for its program for the mediation of investigations under section 337 of the Tariff Act of 1930. The revised Users' Manual...

  7. The Radiological Safety Analysis Computer Program (RSAC-5) user's manual

    International Nuclear Information System (INIS)

    Wenzel, D.R.

    1994-02-01

    The Radiological Safety Analysis Computer Program (RSAC-5) calculates the consequences of the release of radionuclides to the atmosphere. Using a personal computer, a user can generate a fission product inventory from either reactor operating history or nuclear criticalities. RSAC-5 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated through the inhalation, immersion, ground surface, and ingestion pathways. RSAC+, a menu-driven companion program to RSAC-5, assists users in creating and running RSAC-5 input files. This user's manual contains the mathematical models and operating instructions for RSAC-5 and RSAC+. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-5 and RSAC+. These programs are designed for users who are familiar with radiological dose assessment methods

  8. Pesticide Applicator Training Manual, Category 2 - Forest Pest Control. A Training Program for the Certification of Commercial Pesticide Applicators.

    Science.gov (United States)

    Sinclair, W. A., Comp.

    This manual provides information needed to meet specific standards for certification as a pesticide applicator. Each of the eight chapters deals with a different aspect of pesticide use. Chapter one discusses the problems of use as it relates to safety of humans and the environment. Chapter two is concerned with the identification and diagnosis of…

  9. KAFEPA-II program users' manual and description

    International Nuclear Information System (INIS)

    Suk, H. C.; Hwang, W.; Kim, B. G.; Sim, K. S.; Heo, Y. H.; Byun, T. S.; Park, G. S.

    1992-04-01

    KAFEPA-II is a computer program for simulating the behaviour of UO 2 fuel elements under normal operating conditions of a CANDU reactor. It computes the one-dimensional temperature distribution and thermal expansion of the fuel pellets. The amount of gas released during irradiation of the fuel is also computed. Thermal expansion and gas pressure inside the fuel element are then used to compute the strains and stresses in the sheath. This document is intended as a user's manual and description for KAFEPA-II. (Author)

  10. Programmers's manual for the SYVAC geosphere program GEO2

    International Nuclear Information System (INIS)

    Oldfield, S.G.; Broyd, T.W.

    1983-11-01

    A Programmers' Manual for the computer model GEO2, of radionuclide migration through an unsaturated multi-layered rock strata GEO2 uses a numerical solution to equations of one dimensional flow and transport of radionuclides in the groundwater, including the effects of linear equilibrium sorption (for porous or fractured media), linear dispersion and chain decay for arbitrary chain lengths, The model is designed to be incorporated into the SYVAC (SYstems Variability Analysis Code) computer program the function of which is to perform generic uncertainty assessments on hypothetical vault-geosphere-biosphere combinations, taking into account parameter variability and uncertainty. (author)

  11. Biosafety Manual

    Energy Technology Data Exchange (ETDEWEB)

    King, Bruce W.

    2010-05-18

    Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may cause disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.

  12. Manual of program operation for data analysis from radiometer system

    International Nuclear Information System (INIS)

    Silva Mello, L.A.R. da; Migliora, C.G.S.

    1987-12-01

    This manual describes how to use the software to retrieve and analyse data from radiometer systems and raingauges used in the 12 GHz PROPAGATION MEASUREMENTS/CANADA - TELEBRAS COOPERATION PROGRAM. The data retrieval and analisys is being carried out by CETUC, as part of the activities of the project Simulacao de Enlaces Satelite (SES). The software for these tasks has been supplied by the Canadian Research Centre (CRC), together with the measurement equipment. The two following sections describe the use of the data retrieval routines and the data analysis routines of program ATTEN. Also, a quick reference guide for commands that can be used when a microcomputer is local or remotely connected to a radiometer indoor unit is included as a last section. A more detailed description of these commands, their objectives and cautions that should de taken when using them can be found in the manual ''12 GHz Propagation Measurements System - Volume 1 - Dual Slope Radiometer and Data Aquisition System'', supplied by Diversitel Communications Inc. (author) [pt

  13. Sandia National Laboratories, California Environmental Management System Program Manual.

    Energy Technology Data Exchange (ETDEWEB)

    2009-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 450.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site received ISO 14001 certification in September 2006. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy Management and Fleet Services Environmental programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia

  14. Sandia National Laboratories, California Environmental Management System program manual.

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Barbara L.

    2012-03-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 436.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site first received ISO 14001 certification in September 2006 and recertification in 2009. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy and Water Resource Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has

  15. Sandia National Laboratories, California Environmental Management System Program Manual.

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Barbara L.

    2011-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 450.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site received ISO 14001 certification in September 2006. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National Laboratories

  16. Procedures manual for the ORNL Radiological Survey Activities (RASA) Program

    International Nuclear Information System (INIS)

    Myrick, T.E.; Berven, B.A.; Cottrell, W.D.; Goldsmith, W.A.; Haywood, F.F.

    1987-04-01

    The portion of the radiological survey program performed by ORNL is the subject of this Procedures Manual. The RASA group of the Health and Safety Research Division (HASRD) at ORNL is responsible for the planning, conducting, and reporting of the results of radiological surveys at specified sites and associated vicinity properties. The results of these surveys are used by DOE in determining the need for and extent of remedial actions. Upon completion of the necessary remedial actions, the ORNL-RASA group or other OOS contractor may be called upon to verify the effectiveness of the remedial action. Information from these postremedial action surveys is included as part of the data base used by DOE in certifying a site for unrestricted use

  17. Procedures manual for the ORNL Radiological Survey Activities (RASA) Program

    Energy Technology Data Exchange (ETDEWEB)

    Myrick, T.E.; Berven, B.A.; Cottrell, W.D.; Goldsmith, W.A.; Haywood, F.F.

    1987-04-01

    The portion of the radiological survey program performed by ORNL is the subject of this Procedures Manual. The RASA group of the Health and Safety Research Division (HASRD) at ORNL is responsible for the planning, conducting, and reporting of the results of radiological surveys at specified sites and associated vicinity properties. The results of these surveys are used by DOE in determining the need for and extent of remedial actions. Upon completion of the necessary remedial actions, the ORNL-RASA group or other OOS contractor may be called upon to verify the effectiveness of the remedial action. Information from these postremedial action surveys is included as part of the data base used by DOE in certifying a site for unrestricted use.

  18. Programmers' manual for the SYVAC geosphere program GEO3

    International Nuclear Information System (INIS)

    Oldfield, S.G.; Broyd, T.W.

    1983-11-01

    A Programmers' Manual for the computer model GEO3, of radionuclide migration through a saturated or unsaturated, multi-layered rock strata. GEO3 uses either a numerical (unsaturated) or an analytical (saturated) solution to equations of the one dimensional flow and three dimensional transport of radionuclides in the groundwater, including the effects of linear equilibrium sorption (for porous or fractured media), longitudinal and transverse dispersion, and chain decay for arbitrary chain lengths. The model is designed to be incorporated into the SYVAC (SYstems Variability Analysis Code) computer program, the function of which is to perform generic uncertainty assessments on hypothetical vault-geosphere-biosphere combinations, taking into account parameter variability and uncertainty. (author)

  19. The Photonovel: A Tool for Development. Program and Training Journal Manual Series Number 4.

    Science.gov (United States)

    Weaks, Daniel

    Designed as a working and teaching tool for development workers, this manual includes the step-by-step process for preparing a photonovel. Chapter 1 introduces the photonovel, a blend of comic book and motion picture that substitutes photographs for the stylized drawings. It lists its advantages and disadvantages as an educational medium and tool…

  20. Operations manual for the plasma source ion implantation economics program

    International Nuclear Information System (INIS)

    Bibeault, M.L.; Thayer, G.R.

    1995-10-01

    Plasma Source Ion Implantation (PSII) is a surface modification technique for metal. PSIICOSTMODEL95 is an EXCEL-based program that estimates the cost for implementing a PSII system in a manufacturing setting where the number of parts to be processed is over 5,000 parts per day and the shape of each part does not change from day to day. Overall, the manufacturing process must be very well defined and should not change. This document is a self-contained manual for PSIICOSTMODEL95. It assumes the reader has some general knowledge of the technical requirements for PSII. Configuration of the PSII process versus design is used as the methodology in PSIICOSTMODEL95. The reason behind this is twofold. First, the design process cannot be programmed into a computer when the relationships between design variables are not understood. Second, the configuration methodology reduces the number of assumptions that must be programmed into our software. Misuse of results are less likely to occur if the user has fewer assumptions to understand

  1. Program desk manual for occupational safety and health -- U.S. Department of Energy Richland Operations, Office of Environment Safety and Health

    International Nuclear Information System (INIS)

    Musen, L.G.

    1998-01-01

    The format of this manual is designed to make this valuable information easily accessible to the user as well as enjoyable to read. Each chapter contains common information such as Purpose, Scope, Policy and References, as well as information unique to the topic at hand. This manual can also be provided on a CD or Hanford Internet. Major topics include: Organization and program for operational safety; Occupational medicine; Construction and demolition; Material handling and storage; Hoisting and rigging; Explosives; Chemical hazards; Gas cylinders; Electrical; Boiler and pressure vessels; Industrial fire protection; Industrial hygiene; and Safety inspection checklist

  2. Program desk manual for occupational safety and health -- U.S. Department of Energy Richland Operations, Office of Environment Safety and Health

    Energy Technology Data Exchange (ETDEWEB)

    Musen, L.G.

    1998-08-27

    The format of this manual is designed to make this valuable information easily accessible to the user as well as enjoyable to read. Each chapter contains common information such as Purpose, Scope, Policy and References, as well as information unique to the topic at hand. This manual can also be provided on a CD or Hanford Internet. Major topics include: Organization and program for operational safety; Occupational medicine; Construction and demolition; Material handling and storage; Hoisting and rigging; Explosives; Chemical hazards; Gas cylinders; Electrical; Boiler and pressure vessels; Industrial fire protection; Industrial hygiene; and Safety inspection checklist.

  3. Computer program user's manual for FIREFINDER digital topographic data verification library dubbing system

    Science.gov (United States)

    Ceres, M.; Heselton, L. R., III

    1981-11-01

    This manual describes the computer programs for the FIREFINDER Digital Topographic Data Verification-Library-Dubbing System (FFDTDVLDS), and will assist in the maintenance of these programs. The manual contains detailed flow diagrams and associated descriptions for each computer program routine and subroutine. Complete computer program listings are also included. This information should be used when changes are made in the computer programs. The operating system has been designed to minimize operator intervention.

  4. AutoBayes Program Synthesis System Users Manual

    Science.gov (United States)

    Schumann, Johann; Jafari, Hamed; Pressburger, Tom; Denney, Ewen; Buntine, Wray; Fischer, Bernd

    2008-01-01

    Program synthesis is the systematic, automatic construction of efficient executable code from high-level declarative specifications. AutoBayes is a fully automatic program synthesis system for the statistical data analysis domain; in particular, it solves parameter estimation problems. It has seen many successful applications at NASA and is currently being used, for example, to analyze simulation results for Orion. The input to AutoBayes is a concise description of a data analysis problem composed of a parameterized statistical model and a goal that is a probability term involving parameters and input data. The output is optimized and fully documented C/C++ code computing the values for those parameters that maximize the probability term. AutoBayes can solve many subproblems symbolically rather than having to rely on numeric approximation algorithms, thus yielding effective, efficient, and compact code. Statistical analysis is faster and more reliable, because effort can be focused on model development and validation rather than manual development of solution algorithms and code.

  5. A Manual for the Anchorage School District Bilingual Education Program Revised Scope and Sequence, K-3.

    Science.gov (United States)

    Heinrich, Maria Nieves Bumanlag Lilagan

    The manual offers a systematic set of procedures and relevant information to facilitate effective use of the Anchorage school district (ASD) bilingual education program (BEP). The historical background of the program's development is presented, available manuals for teaching English to limited English proficiency (LEP) students and related…

  6. Occupational Safety and Health Program Guidelines for Colleges and Universities. An Administrative Resource Manual.

    Science.gov (United States)

    Godbey, Frank W.; Hatch, Loren L.

    Designed as an aid for establishing and strengthening occupational safety and health programs on college and university campuses, this administrator guide is divided into four chapters. The first chapter defines and gives background information on the Occupational Safety and Health Act (OSHA). In addition, it presents a discussion of what the OSHA…

  7. C-program LINOP for the evaluation of film dosemeters by linear optimization. User manual

    International Nuclear Information System (INIS)

    Kragh, P.

    1995-11-01

    Linear programming results in an optimal measuring value for film dosemeters. The Linop program was developed to be used for linear programming. The program permits the evaluation and control of film dosemeters and of all other multi-component dosemeters. This user manual for the Linop program contains the source program, a description of the program and installation and use instructions. The data sets with programs and examples are available upon request. (orig.) [de

  8. Discovery: Faculty Publications and Presentations, Fiscal Year 1980. Volume 1. Books, Texts, Manuals, Chapters, Papers, Reports, and Presentations

    Science.gov (United States)

    1980-09-01

    organizationally dysfunctional behavior. Of course, the latter includes racism , sexism , and brutality. c. "Transcultural Health Care." Menlo Park...area rule. The paper discusses the theory as it pertains to the simplication wind tunnel experiments used to verify the theory , a program developed...34Computerized Test Generation System" (Research) The purpose of the system is to allow a course director to build a data base of questions. statistics

  9. Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications II. Users Manual and Program Description. 2; Users Manual and Program Description

    Science.gov (United States)

    McBride, Bonnie J.; Gordon, Sanford

    1996-01-01

    This users manual is the second part of a two-part report describing the NASA Lewis CEA (Chemical Equilibrium with Applications) program. The program obtains chemical equilibrium compositions of complex mixtures with applications to several types of problems. The topics presented in this manual are: (1) details for preparing input data sets; (2) a description of output tables for various types of problems; (3) the overall modular organization of the program with information on how to make modifications; (4) a description of the function of each subroutine; (5) error messages and their significance; and (6) a number of examples that illustrate various types of problems handled by CEA and that cover many of the options available in both input and output. Seven appendixes give information on the thermodynamic and thermal transport data used in CEA; some information on common variables used in or generated by the equilibrium module; and output tables for 14 example problems. The CEA program was written in ANSI standard FORTRAN 77. CEA should work on any system with sufficient storage. There are about 6300 lines in the source code, which uses about 225 kilobytes of memory. The compiled program takes about 975 kilobytes.

  10. Field manual for ground water reconnaissance. Savannah River Laboratory National Uranium Resource Evaluation Program

    International Nuclear Information System (INIS)

    Ferguson, R.B.; Price, V.; Baucom, E.I.

    1977-01-01

    A manual is presented that is intended to direct and coordinate field operations, site selection, groundwater sample collection, and information codes for the Savannah River Laboratory (SRL) contribution to the National Uranium Resource Evaluation (NURE) program. The manual provides public relations information for field sampling teams as well as technical direction

  11. Management Information System Project. Data Processors Manual to the Program Oriented Accounting System: The Budgetary Process.

    Science.gov (United States)

    Foley, Walter; Harr, Gordon

    The purpose of this manual is to serve the needs of a data processing facility in the operation of a management information system (MIS). Included in the manual are system flowcharts, job control language, and system documentation. The system has been field tested and operates under IBM System 360/Model 65-05-MVT-HASP. The programing language is…

  12. Super Summer Safari Manual: 1989 Summer Library Program. Bulletin No. 9240.

    Science.gov (United States)

    Roeber, Jane A., Ed.

    Based on the theme, "Super Summer Safari: Make Books Your Big Game," this manual describes library activities intended to stimulate family explorations of local and regional natural environments, of urban parks, and of agricultural settings. The manual is divided into 6 sections: (1) "Planning and Promoting Programs"; (2)…

  13. Roadmap Through Title XX. Financing Services for Children Through Title XX and Other Programs: Manual 5.

    Science.gov (United States)

    Copeland, William C.; Iversen, Iver A.

    This manual, part of a Hecht Institute four-manual series entitled Financing Children's Services Through Title XX and Related Programs, teaches what Title XX regulations are, what they mean, and what actions and procedures are commanded by them. The first section covers the necessity of rule systems, the characteristics of a good rule system and…

  14. Field manual for stream sediment reconnaissance. Savannah River Laboratory National Uranium Resource Evaluation Program

    International Nuclear Information System (INIS)

    Ferguson, R.B.; Price, V.; Baucom, E.I.

    1976-07-01

    A manual is presented that is intended to direct and coordinate field operations, site selection, stream sediment sample collection, water sample collection, and information codes for the Savannah River Laboratory (SRL) contribution to the National Uranium Resource Evaluation (NURE) program. The manual provides public relations information for field sampling teams as well as technical direction

  15. Financial Reporting and Cost Analysis Manual for Day Care Centers, Head Start, and Other Programs.

    Science.gov (United States)

    Bedger, Jean E.; And Others

    This manual is designed to provide fundamental directions for systematic financial reporting and cost analysis for the administrators, accountants, bookkeepers, and staff of day care, Project Head Start, and other programs. The major aims of the manual are to induce day care directors to adopt uniform bookkeeping procedures and to analyze costs…

  16. Development of object oriented program `SONSHO` for strength evaluation. Manual of Version 4.0 program

    Energy Technology Data Exchange (ETDEWEB)

    Hosogai, Hiromi [Joyo Industries Co. Ltd., Tokai, Ibaraki (Japan); Kasahara, Naoto

    1998-07-01

    Object Oriented Program `SONSHO` predicts creep fatigue damage factors based on Elevated Temperature Structural Design Guide for `Monju` and other various procedures from stress classification data obtained from structural analysis results. From view point of program implementation, it is required that external programs interface and frequent revise from update of material and creep fatigue evaluation methods. Object oriented approach was continuously introduced to improve these aspects of the program. Version 4.0 has the following new functions. (1) Material strength library was implemented as an independent program module based on Microsoft Active X control and 32bitDLL technologies, which can be accessed by general Windows programs. (2) Self instruction system `Wizard` enables manual less operation. (3) Microsoft common object model (COM) was adopted for program interface, and this program can communicate with Excel sheet data on memory. Sonsho Ver.4.0 can work on Windows 95 or Windows NT4.0. Microsoft Visual Basic 5.0 (Enterprose Edition) and Microsoft FORTRAN Power Station 4.0 were adopted for program. (author)

  17. Quality Manual

    Science.gov (United States)

    Koch, Michael

    The quality manual is the “heart” of every management system related to quality. Quality assurance in analytical laboratories is most frequently linked with ISO/IEC 17025, which lists the standard requirements for a quality manual. In this chapter examples are used to demonstrate, how these requirements can be met. But, certainly, there are many other ways to do this.

  18. National Uranium Resource Evaluation Program. Hydrogeochemical and Stream Sediment Reconnaissance Basic Data Reports Computer Program Requests Manual

    International Nuclear Information System (INIS)

    1980-01-01

    This manual is intended to aid those who are unfamiliar with ordering computer output for verification and preparation of Uranium Resource Evaluation (URE) Project reconnaissance basic data reports. The manual is also intended to help standardize the procedures for preparing the reports. Each section describes a program or group of related programs. The sections are divided into three parts: Purpose, Request Forms, and Requested Information

  19. Reading Roundup: Rope a Good Book. Louisiana Summer Reading Program, 1995 Manual.

    Science.gov (United States)

    White, Dorothy, J., Ed.

    A manual for the Louisiana Summer Reading Program is presented in 14 sections with a western theme and illustrations. An evaluation form, a 1995 calendar, and a list of audiovisual materials with addresses and prices are also provided. Section 1 discusses promotion, publicity, and programs; and includes sample news releases; program ideas, and…

  20. User's manual for elegant Program Version 12.4, Manual Version 1

    International Nuclear Information System (INIS)

    Borland, M.

    1993-01-01

    Elegant stands for ''Electron Generation and Tracking,'' a somewhat out-of-date description of a fully 6D accelerator program that now does much more than generate particle distributions and track them elegant, written entirely in the C programming language, uses a variant of the MAD input format to describe accelerators, which may be either transport lines, circular machines, or a combination thereof. Program execution is driven by commands in a namelist format. This document describes the features available in elegant, listing the commands and their arguments. The differences between elegant and MAD formats for describing accelerators are listed. A series of examples of elegant input and output are given. Finally, appendices are included describing the post-processing programs

  1. SPIE's School Outreach Activity Program (SOAP) by IIT Madras SPIE Student Chapter: a review

    Science.gov (United States)

    Kalikivayi, Lavanya; Kalikivayi, V.; Udayakumar, K.; Ganesan, A. R.

    2014-09-01

    One of the important aspects of SPIE is "Community Support and Outreach Education", which should raise awareness and interest in optics and photonics among the targeted communities and school children. Hence as part of SPIE IIT Madras student chapter, we carried out SPIE SOAP, a `School Outreach Activity Program'. Two types of schools were identified, one a high socio-economic status school and the other a low socio-economic status school having a majority of poor children. Optics related scientific experiments were demonstrated in these schools followed by oral quiz session to the students to assess the level of their knowledge before and after the experiments. We also clubbed this activity with "Vision Screening" and distribution of free spectacles for those children who live below poverty line. Out of the 415 children screened, 60.84% eyes were having normal vision, while 39.16% were found to have refractive errors (Myopia 35.78% and Hyperopia 3.38%) where some of them could not even read the board. Treatable eye diseases were also found in 0.72% of the children. The entire activity is been discussed and documented in this paper.

  2. General Employee Radiological Training and Radiological Worker Training: Program management manual

    International Nuclear Information System (INIS)

    1992-10-01

    This manual defines and describes the DOE General Employee Radiological Training (GERT) and Radiological Worker I and II (RW I and II) Training programs. It includes material development requirements, standards and policies, and program administration. This manual applies to General Employee Radiological Training and Radiological Worker Training at all DOE contractor sites. The training materials of both GERT and RW I and II training reflect the requirements identified in the DOE Radiological Control Manual and DOE Order 5480.11. The training programs represent the minimum requirement for the standardized core materials. Each contractor shall implement the program in its entirety and may augment the standardized core materials to increase the general employee and radiological worker level of competency

  3. Survey Procedures Manual for the Environmental Survey and Site Assessment Program (ESSAP). Revision 10

    International Nuclear Information System (INIS)

    2000-01-01

    The Environmental Survey and Site Assessment Program (ESSAP) of the Oak Ridge Institute for Science and Education (ORISE) conducts radiological survey activities under a contract with the U. S. Department of Energy (DOE) and for the U.S. Nuclear Regulatory Commission (NRC). ORISE and its programs are operated by Oak Ridge Associated Universities (ORAU) through a contract with DOE. The purpose of this Procedures Manual is to provide a standardized set of procedures that document activities of the program in an auditable manner. These procedures are applicable to both DOE and NRC operations. Procedures presented in this manual are limited to those associated with site survey activities

  4. Highway Safety Program Manual: Volume 8: Alcohol in Relation to Highway Safety.

    Science.gov (United States)

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 8 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on alcohol in relation to highway safety. The purpose and objectives of the alcohol program are outlined. Federal authority in the area of highway safety and general policies regarding…

  5. Viscous wing theory development. Volume 2: GRUMWING computer program user's manual

    Science.gov (United States)

    Chow, R. R.; Ogilvie, P. L.

    1986-01-01

    This report is a user's manual which describes the operation of the computer program, GRUMWING. The program computes the viscous transonic flow over three-dimensional wings using a boundary layer type viscid-inviscid interaction approach. The inviscid solution is obtained by an approximate factorization (AFZ)method for the full potential equation. The boundary layer solution is based on integral entrainment methods.

  6. In Vivo Monitoring Program Manual, PNL-MA-574

    Energy Technology Data Exchange (ETDEWEB)

    Lynch, Timothy P.

    2010-07-01

    An overview of the administration for the In Vivo Monitoring Program (IVMP) for Hanford. This includes organizational structure and program responsibilities; coordination of in vivo measurements; scheduling measurements; performing measurements; reporting results; and quality assurance. Overall responsibility for the management of the IVMP rests with the Program Manager (PM). The PM is responsible for providing the required in vivo counting services for Hanford Site contractor employees in accordance with Department of Energy (DOE) requirements and the specific statements of work.

  7. Manualization of Occupational Therapy Interventions: Illustrations from the Pressure Ulcer Prevention Research Program

    Science.gov (United States)

    Blanche, Erna Imperatore; Fogelberg, Donald; Diaz, Jesus; Carlson, Mike; Clark, Florence

    2011-01-01

    The manualization of a complex occupational therapy intervention is a crucial step in ensuring treatment fidelity for both clinical application and research purposes. Towards this latter end, intervention manuals are essential for assuring trustworthiness and replicability of randomized controlled trials (RCT’s) that aim to provide evidence of the effectiveness of occupational therapy. In this paper, literature on the process of intervention manualization is reviewed. The prescribed steps are then illustrated through our experience in implementing the University of Southern California/Rancho Los Amigos National Rehabilitation Center’s collaborative Pressure Ulcer Prevention Project (PUPP). In this research program, qualitative research provided the initial foundation for manualization of a multifaceted occupational therapy intervention designed to reduce incidence of medically serious pressure ulcers in people with SCI. PMID:22214116

  8. Manual of the Option.com program (ion optics); Manual del programa Option.com

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez B, M

    1991-02-15

    The laws that govern the trajectory that follow the charged particles in the hole, inside magnetic fields (to first approach) are similar to those of the geometric classic optics by it to observe a graph of the trajectories gives an excellent understanding of that is happening to the beam. The object of this program is that besides providing the numeric data of the solution of the problem of the transverse section of the beam, be also shown a graph of the trajectories but external regarding the optic axis in the treated region and aid the user asking in the case of a system of two quadrupoles, where it is wanted to focus the beam. (Author)

  9. Hanford Waste Vitrification Plant technical manual

    Energy Technology Data Exchange (ETDEWEB)

    Larson, D.E. [ed.; Watrous, R.A.; Kruger, O.L. [and others

    1996-03-01

    A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. The immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.

  10. Hanford Waste Vitrification Plant technical manual

    International Nuclear Information System (INIS)

    Larson, D.E.; Watrous, R.A.; Kruger, O.L.

    1996-03-01

    A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. The immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version

  11. User's Manual for SPECTROM-41: a Finite-Element Heat Transfer Program

    International Nuclear Information System (INIS)

    Svalstad, D.K.

    1983-06-01

    This User's Manual addresses SPECTROM-41: A Finite Element Heat Transfer Computer Program. The user is introduced to the program's capabilities and operation, with required user input outlined in detail. Example problems are included to illustrate the use of the various program features, and included to illustrate the use of the various program features, and analytical solutions are presented for four of the examples to provide a measure of program accuracy. Past and ongoing comparative benchmark analyses are highlighted to provide the user with an indication of how SPECTROM-41 predictions compare with other available heat transfer programs

  12. Guidelines for Management Consulting Programs for Small-Scale Enterprise. Appropriate Technologies for Development. Manual M-14.

    Science.gov (United States)

    Vaughan, Gary L.

    This manual is designed to assist management consultants in working with small-scale entrepreneurs in developing countries. Addressed in an overview of the small-scale enterprise (SSE) are: the role of the SSE in third world development, problems of SSEs, and target firms. The second chapter deals with various forms of management assistance to…

  13. GKS-EZ programming manual for FORTRAN-77

    Energy Technology Data Exchange (ETDEWEB)

    Beach, R.C.

    1992-01-01

    A standard has now been adopted for subroutine packages that drive graphic devices. It is known as the Graphical Kernel system (GKS), and many commercial implementations of it are available. Unfortunately, it is a difficult system to learn, and certain functions that are important for scientific use are not provided. Although GKS can be used to achieve portability of graphic applications between graphic devices, computers, and operating systems, it can also be misused in this respect. In addition, it introduces the very real problem of portability between the various implementations of GKS. This document describes a set of FORTRAN-77 subroutines that may be used to control a wide variety of graphic devices and overcome most of these problems. Some of these subroutines are from GKS itself, while others are higher-level subroutines that call GKS subroutines. These subroutines are collectively known as GKS-EZ. The purpose is to supply someone who is not a specialist in computer graphics with a flexible, robust, and easy to learn graphics system. Users of GKS-EZ should not have much need for a full GKS manual; this document will supply all of the information to use GKS-EZ except for a few items. These missing items include the numeric identification of the supported graphic devices and the procedure for linking the GKS subroutines into a executable module.

  14. Generic Optimization Program User Manual Version 3.0.0

    International Nuclear Information System (INIS)

    Wetter, Michael

    2009-01-01

    GenOpt is an optimization program for the minimization of a cost function that is evaluated by an external simulation program. It has been developed for optimization problems where the cost function is computationally expensive and its derivatives are not available or may not even exist. GenOpt can be coupled to any simulation program that reads its input from text files and writes its output to text files. The independent variables can be continuous variables (possibly with lower and upper bounds), discrete variables, or both, continuous and discrete variables. Constraints on dependent variables can be implemented using penalty or barrier functions. GenOpt uses parallel computing to evaluate the simulations. GenOpt has a library with local and global multi-dimensional and one-dimensional optimization algorithms, and algorithms for doing parametric runs. An algorithm interface allows adding new minimization algorithms without knowing the details of the program structure. GenOpt is written in Java so that it is platform independent. The platform independence and the general interface make GenOpt applicable to a wide range of optimization problems. GenOpt has not been designed for linear programming problems, quadratic programming problems, and problems where the gradient of the cost function is available. For such problems, as well as for other problems, special tailored software exists that is more efficient

  15. Generic Optimization Program User Manual Version 3.0.0

    Energy Technology Data Exchange (ETDEWEB)

    Wetter, Michael

    2009-05-11

    GenOpt is an optimization program for the minimization of a cost function that is evaluated by an external simulation program. It has been developed for optimization problems where the cost function is computationally expensive and its derivatives are not available or may not even exist. GenOpt can be coupled to any simulation program that reads its input from text files and writes its output to text files. The independent variables can be continuous variables (possibly with lower and upper bounds), discrete variables, or both, continuous and discrete variables. Constraints on dependent variables can be implemented using penalty or barrier functions. GenOpt uses parallel computing to evaluate the simulations. GenOpt has a library with local and global multi-dimensional and one-dimensional optimization algorithms, and algorithms for doing parametric runs. An algorithm interface allows adding new minimization algorithms without knowing the details of the program structure. GenOpt is written in Java so that it is platform independent. The platform independence and the general interface make GenOpt applicable to a wide range of optimization problems. GenOpt has not been designed for linear programming problems, quadratic programming problems, and problems where the gradient of the cost function is available. For such problems, as well as for other problems, special tailored software exists that is more efficient.

  16. INTERLINE, a railroad routing model: program description and user's manual

    International Nuclear Information System (INIS)

    Peterson, B.E.

    1985-11-01

    INTERLINE is an interactive computer program that finds likely routes for shipments over the US railroad system. It is based on a shortest path algorithm modified both to reflect the nature of railroad company operations and to accommodate computer resource limitations in dealing with a large transportation network. The first section of the report discusses the nature of railroad operations and routing practices in the United States, including the tendency to concentrate traffic on a limited number of mainlines, the competition for traffic by different companies operating in the same corridors, and the tendency of originating carriers to retain traffic on their systems before transferring it to terminating carriers. The theoretical foundation and operation of shortest path algorithms are described, as well as the techniques used to simulate actual operating practices within this framework. The second section is a user's guide that describes the program operation and data structures, program features, and user access. 11 refs., 11 figs

  17. Photovoltaic subsystem marketing and distribution model: programming manual. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    Complete documentation of the marketing and distribution (M and D) computer model is provided. The purpose is to estimate the costs of selling and transporting photovoltaic solar energy products from the manufacturer to the final customer. The model adjusts for the inflation and regional differences in marketing and distribution costs. The model consists of three major components: the marketing submodel, the distribution submodel, and the financial submodel. The computer program is explained including the input requirements, output reports, subprograms and operating environment. The program specifications discuss maintaining the validity of the data and potential improvements. An example for a photovoltaic concentrator collector demonstrates the application of the model.

  18. User's manual for the Composite HTGR Analysis Program (CHAP-1)

    International Nuclear Information System (INIS)

    Gilbert, J.S.; Secker, P.A. Jr.; Vigil, J.C.; Wecksung, M.J.; Willcutt, G.J.E. Jr.

    1977-03-01

    CHAP-1 is the first release version of an HTGR overall plant simulation program with both steady-state and transient solution capabilities. It consists of a model-independent systems analysis program and a collection of linked modules, each representing one or more components of the HTGR plant. Detailed instructions on the operation of the code and detailed descriptions of the HTGR model are provided. Information is also provided to allow the user to easily incorporate additional component modules, to modify or replace existing modules, or to incorporate a completely new simulation model into the CHAP systems analysis framework

  19. ConsExpo - Consumer Exposure and Uptake Models -Program Manual

    NARCIS (Netherlands)

    Delmaar JE; Park MVDZ; Engelen JGM van; SIR

    2006-01-01

    This report provides guidance to the use of ConsExpo 4.0, successor to ConsExpo 3.0, a computer program that was developed to assist in the exposure assessment of compounds in non-food consumer products. The wide range of available consumer products is associated with an even wider variation in

  20. REFORMA/UCLA Mentor Program: A Mentoring Manual.

    Science.gov (United States)

    Tauler, Sandra

    Although mentoring dates back to Greek mythology, the concept continues to thrive in today's society. Mentoring is a strategy that successful people have known about for centuries. The REFORMA/UCLA Mentor Program has made use of this strategy since its inception in November 1985 at the Graduate School of Library and Information Science at the…

  1. Professional Student Exchange Program (PSEP) Administrative Manual. Revised

    Science.gov (United States)

    Western Interstate Commission for Higher Education, 2012

    2012-01-01

    WICHE (the Western Interstate Commission for Higher Education) is a regional, nonprofit organization. WICHE and its 15 member states work to improve access to higher education and ensure student success. Its student exchange programs, regional initiatives, and its research and policy work allow it to assist constituents throughout the West and…

  2. Shaking It up: How to Run the Best Club and Chapter Program

    Science.gov (United States)

    Peterson, Erin

    2012-01-01

    Alumni clubs and chapters are powerful tools for keeping alumni connected to each other and the institution, gathering insight into what alumni want from their alma mater, and even raising money for the institution. And while alumni leaders do not need to devote a large amount of their budget to create successful groups, they do need to ensure…

  3. Economic Development through Youth. A Program for Schools and Communities. Manual.

    Science.gov (United States)

    Nolen, Lori

    This manual is designed to help teachers, businesses, Chambers of Commerce, and students start their own economic development activities and youth ventures. It describes a two-step plan to economic development through youth: development of an in-school student chamber of commerce program and development of a youth-owned venture. The first part of…

  4. Vocational Education Program/Course Inventory Form PCI. Explanation and Instructional Manual.

    Science.gov (United States)

    California Occupational Information Coordinating Committee, Sacramento.

    This manual for teachers, administrators, and counselors both explains the Program/Course Inventory (PCI), a data collection instrument, and provides instructions for completing the PCI form. The first section describes the PCI developed by the Ventura County Superintendent of Schools staff to collect data that define vocational education…

  5. URSULA2 computer program. Volume 3. User's manual. Final report

    International Nuclear Information System (INIS)

    Singhal, A.K.

    1980-01-01

    This report is intended to provide documentation for the users of the URSULA2 code so that they can appreciate its important features such as: code structure, flow chart, grid notations, coding style, usage of secondary storage and its interconnection with the input preparation program (Reference H3201/4). Subroutines and subprograms have been divided into four functional groups. The functions of all subroutines have been explained with particular emphasis on the control subroutine (MAIN) and the data input subroutine (BLOCK DATA). Computations for the flow situations similar to the reference case can be performed simply by making alterations in BLOCK DATA. Separate guides for the preparation of input data and for the interpretation of program output have been provided. Furthermore, two appendices; one for the URSULA2 listing and the second for the glossary of FORTRAN variables, are included to make this report self-sufficient

  6. General Rotorcraft Aeromechanical Stability Program (GRASP): Theory manual

    Science.gov (United States)

    Hodges, Dewey H.; Hopkins, A. Stewart; Kunz, Donald L.; Hinnant, Howard E.

    1990-01-01

    The general rotorcraft aeromechanical stability program (GRASP) was developed to calculate aeroelastic stability for rotorcraft in hovering flight, vertical flight, and ground contact conditions. GRASP is described in terms of its capabilities and its philosophy of modeling. The equations of motion that govern the physical system are described, as well as the analytical approximations used to derive them. The equations include the kinematical equation, the element equations, and the constraint equations. In addition, the solution procedures used by GRASP are described. GRASP is capable of treating the nonlinear static and linearized dynamic behavior of structures represented by arbitrary collections of rigid-body and beam elements. These elements may be connected in an arbitrary fashion, and are permitted to have large relative motions. The main limitation of this analysis is that periodic coefficient effects are not treated, restricting rotorcraft flight conditions to hover, axial flight, and ground contact. Instead of following the methods employed in other rotorcraft programs. GRASP is designed to be a hybrid of the finite-element method and the multibody methods used in spacecraft analysis. GRASP differs from traditional finite-element programs by allowing multiple levels of substructure in which the substructures can move and/or rotate relative to others with no small-angle approximations. This capability facilitates the modeling of rotorcraft structures, including the rotating/nonrotating interface and the details of the blade/root kinematics for various types. GRASP differs from traditional multibody programs by considering aeroelastic effects, including inflow dynamics (simple unsteady aerodynamics) and nonlinear aerodynamic coefficients.

  7. Chapter 08: Comments on, and additional information for, wood identification

    Science.gov (United States)

    Alex C. Wiedenhoeft

    2011-01-01

    This manual has described the theory of identification (Chapter 1), the botanical basis of wood structure (Chapter 2), the use of a hand lens (Chapter 3), how to use cutting tools to prepare wood for observation with a lens (Chapter 4), and the characters used in hand lens wood identification (Chapter 5) before leading you through an identification key (Chapter 6) and...

  8. Aquifer thermal energy storage reference manual: seasonal thermal energy storage program

    Energy Technology Data Exchange (ETDEWEB)

    Prater, L.S.

    1980-01-01

    This is the reference manual of the Seasonal Thermal Energy Storage (STES) Program, and is the primary document for the transfer of technical information of the STES Program. It has been issued in preliminary form and will be updated periodically to include more technical data and results of research. As the program progresses and new technical data become available, sections of the manual will be revised to incorporate these data. This primary document contains summaries of: the TRW, incorporated demonstration project at Behtel, Alaska, Dames and Moore demonstration project at Stony Brook, New York, and the University of Minnesota demonstration project at Minneapolis-St. Paul, Minnesota; the technical support programs including legal/institutional assessment; economic assessment; environmental assessment; field test facilities; a compendia of existing information; numerical simulation; and non-aquifer STES concepts. (LCL)

  9. ELESTRES.M11K program users'manual and description

    International Nuclear Information System (INIS)

    Suk, H. C.; Hwang, W.; Kim, B. G.; Sim, K. S.; Heo, Y. H.; Byun, T. S.; Park, G. S.

    1992-12-01

    ELESTRES.M11K is a computer program for simulating the behaviour of UO 2 fuel elements under normal operating conditions of a CANDU reactor. It computers the one-dimensional temperature distribution and thermal expansion of the fuel pellets, and computes two-dimensional pellet deformation using FEM. The amount of fission gas released and sheath strain/stress are also computed. This document is intended as a users' manual and description for ELESTRES.M11K program. (Author)

  10. UMTRA Project-Level Cost Reduction/Productivity Improvement Program manual

    International Nuclear Information System (INIS)

    1995-06-01

    Mission of the Uranium Mill Tailings Remedial Action (UMTRA) Project Cost Reduction/Productivity Improvement Program (CR/PIP) is to contribute to the UMTRA Project's environmental restoration mission by providing the means to achieve and recognize continuous improvements and cost savings. This manual includes program definition, description of UMTRA project organizational responsibilities and interfaces with existing project functions, guidance to contractors, and definition of project-level functions

  11. Project on Social Architecture in Education. Final Report. Part III: Case Studies. Chapter 9: Arts Co-op: An Experimental High School Program.

    Science.gov (United States)

    Sullivan, Ellen Wahl

    This document contains chapter 9 of the final report of the Project on Social Architecture in Education. Chapter 9 is about a regional experimental high school program for the arts. Several features distinguished Arts Co-op from the other schools in the study. For one, it was a special purpose school, focused on the arts, and not offering a…

  12. Manual of the Option.com program (ion optics)

    International Nuclear Information System (INIS)

    Fernandez B, M.

    1991-02-01

    The laws that govern the trajectory that follow the charged particles in the hole, inside magnetic fields (to first approach) are similar to those of the geometric classic optics by it to observe a graph of the trajectories gives an excellent understanding of that is happening to the beam. The object of this program is that besides providing the numeric data of the solution of the problem of the transverse section of the beam, be also shown a graph of the trajectories but external regarding the optic axis in the treated region and aid the user asking in the case of a system of two quadrupoles, where it is wanted to focus the beam. (Author)

  13. Desalination Economic Evaluation Program (DEEP-3.0). User's manual

    International Nuclear Information System (INIS)

    2006-01-01

    DEEP is a Desalination Economic Evaluation Program developed by the International Atomic Energy Agency (IAEA) and made freely available for download, under a license agreement (www.iaea.org/nucleardesalination). The program is based on linked Microsoft Excel spreadsheets and can be useful for evaluating desalination strategies by calculating estimates of technical performance and costs for various alternative energy and desalination technology configurations. Desalination technology options modelled, include multi-stage flashing (MSF), multi-effect distillation (MED), reverse osmosis (RO) and hybrid options (RO-MSF, RO-MED) while energy source options include nuclear, fossil, renewables and grid electricity (stand-alone RO). Version 3 of DEEP (DEEP 3.0) features important changes from previous versions, including upgrades in thermal and membrane performance and costing models, the coupling configuration matrix and the user interface. Changes in the thermal performance model include a revision of the gain output ratio (GOR) calculation and its generalization to include thermal vapour compression effects. Since energy costs continue to represent an important fraction of seawater desalination costs, the lost shaft work model has been generalized to properly account for both backpressure and extraction systems. For RO systems, changes include improved modelling of system recovery, feed pressure and permeate salinity, taking into account temperature, feed salinity and fouling correction factors. The upgrade to the coupling technology configuration matrix includes a re-categorization of the energy sources to follow turbine design (steam vs. gas) and cogeneration features (dual-purpose vs. heat-only). In addition, cost data has also been updated to reflect current practice and the user interface has been refurbished and made user-friendlier

  14. Waste Management Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, J.S. [ed.

    1967-08-31

    This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

  15. Radiographic angles in hallux valgus: differences between measurements made manually and with a computerized program.

    Science.gov (United States)

    Piqué-Vidal, Carlos; Maled-García, Ignaci; Arabi-Moreno, Juanjo; Vila, Joan

    2006-03-01

    The objective of this study was to compare angular measurements in the evaluation of hallux valgus deformities using a goniometer and a computerized program to assess degree of concordance between the two methods and determine the reliability of manual measurements. Angles measured included the hallux valgus angle (HVA), the intermetatarsal angle (IMA), the distal metatarsal articular angle (DMAA), and the proximal phalangeal articular angle (PPAA), also called the hallux valgus interphalangeus angle or interphalangeal angle. Measurements were made on preoperative weightbearing radiographs in 176 patients with symptomatic hallux valgus. Manual measurements were made with a goniometer by an orthopaedic surgeon. An independent experienced technician used digitized images to perform angular measurements with the Autocad software program (Autodesk Inc., San Rafael, CA). HVA values obtained with the two techniques were similar. However, significantly higher mean values were obtained with the Autocad for the IMA and PPAA measurements, and higher mean values were obtained for the DMAA measurement with the manual technique. Whereas differences were more or less randomly distributed for the HVA, in the remaining patients, measurements were clearly related to the measurement technique, i.e., for the DMAA, the manual technique had a tendency to show higher values, and for the IMA and PPAA the manual technique showed lower values than the computer. Correlations between both techniques for the different angular measurements were as follows: HVA, -0.179 (p = 0.018); DMMA, -0.294 (p Autocad angular measurements was excellent for the HVA (ICC = 0.89) and DMAA (ICC = 0.80) and very poor for the PPAA (ICC = 0.11) and IMA (ICC = 0.42). Angular measurements made on weightbearing radiographs with the Autocad in patients with hallux valgus deformities were more reliable than those made with a goniometer. Although for large angles, such as HVA and DMAA, results obtained with both

  16. Quality assurance program manual for nuclear power plants. Volume I. Policies

    International Nuclear Information System (INIS)

    1976-01-01

    The Consumers Power Company Quality Assurance Program Manual for Nuclear Power Plants consists of policies and procedures which comply with current NRC regulatory requirements and industry codes and standards in effect during the design, procurement, construction, testing, operation, refueling, maintenance, repair and modification activities associated with nuclear power plants. Specific NRC and industry documents that contain the requirements, including the issue dates in effect, are identified in each nuclear power plant's Safety Analysis Report. The requirements established by these documents form the basis for the Consumer Power Quality Assurance Program, which is implemented to control those structures, systems, components and operational safety actions listed in each nuclear power plant's Quality List (Q-List). As additional and revised requirements are issued by the NRC and professional organizations involved in nuclear activities, they will be reviewed for their impact on this manual, and changes will be made where considered necessary. CP Co 1--Consumers Power Company QA Program Topical Report is Volume I of this manual and contains Quality Assurance Program Policies applicable during all phases of nuclear power plant design, construction and operation

  17. STICAP: A linear circuit analysis program with stiff systems capability. Volume 1: Theory manual. [network analysis

    Science.gov (United States)

    Cooke, C. H.

    1975-01-01

    STICAP (Stiff Circuit Analysis Program) is a FORTRAN 4 computer program written for the CDC-6400-6600 computer series and SCOPE 3.0 operating system. It provides the circuit analyst a tool for automatically computing the transient responses and frequency responses of large linear time invariant networks, both stiff and nonstiff (algorithms and numerical integration techniques are described). The circuit description and user's program input language is engineer-oriented, making simple the task of using the program. Engineering theories underlying STICAP are examined. A user's manual is included which explains user interaction with the program and gives results of typical circuit design applications. Also, the program structure from a systems programmer's viewpoint is depicted and flow charts and other software documentation are given.

  18. Using a profiling process to insure program quality: Volume I - a self-instructional manual

    Energy Technology Data Exchange (ETDEWEB)

    Kaser, J.S.; Roody, D.S.; Raizen, S.A.

    1996-11-01

    Between 1990 and 1995 the U.S. Department of Energy (DOE) and the National Center for Improving Science Education (National Center) developed a system for ongoing evaluation of K-12 educational programs in the DOE-supported national energy Laboratories. As part of the formative evaluation component of this collaborative endeavor, field staff in the Laboratories began creating profiles of their programs. However, many individuals within DOE Headquarters were not familiar with this profiling process and were unprepared to use the valuable information that the profiles generated. This manual was produced to orient Headquarters staff to profiling. It focuses on how Headquarters staff can use the profiling process to help their funded programs establish and/or maintain high quality. Its purpose, then, is not to train Headquarters staff to become proficient in profiling, but to show them how to draw on the Laboratories` use of profiling to bring about program improvement. Profiling is the process of systematically examining and describing a program`s elements against a set of components that define Effective Practice. The instrument used to capture the data for analysis is called a template, and most of this manual focuses on the templates and how to read and interpret them. However, since it is important to understand these data in context, the authors also describe what should accompany each template in a complete profiling packet and offer guidelines for reviewing complete packets and providing feedback to program managers.

  19. Finding Federal Money for Children's Services: Financing Services for Children through Title XX and Other Programs. Manual 1.

    Science.gov (United States)

    Copeland, William C.

    This is the first manual of a 4-part series on how to find, obtain, contract for and manage Federal money for children's services. The first manual concentrates on ways to locate funds for new and existing programs. Emphasis is on Title XX of the Social Security Act, but attention is given also to alternative sources where Title XX funds are not…

  20. Various chapter styles for the memoir class

    DEFF Research Database (Denmark)

    Madsen, Lars

    2008-01-01

    Document showcasing various chapter title page designs either included in the LaTeX memoir class or is easily manually coded.......Document showcasing various chapter title page designs either included in the LaTeX memoir class or is easily manually coded....

  1. ASFMRA Chapter Strategic Planning: Iowa Chapter Case Study

    OpenAIRE

    Trede, Larry

    2006-01-01

    This paper summarizes the strategic planning process used by the Iowa Chapter of the American Society of Farm Managers and Rural Appraisers to develop a new vision, mission statement, and chapter objectives. Procedures included the use of a focus group and a quantitative survey. The results indicated a strong need for chapter member continuing education, a chapter member services program, and a strong outreach/public relations program. As a result of the strategic planning process, a new chap...

  2. Military construction program economic analysis manual: Sample economic analyses: Hazardous Waste Remedial Actions Program

    International Nuclear Information System (INIS)

    1987-12-01

    This manual enables the US Air Force to comprehensively and systematically analyze alternative approaches to meeting its military construction requirements. The manual includes step-by-step procedures for completing economic analyses for military construction projects, beginning with determining if an analysis is necessary. Instructions and a checklist of the tasks involved for each step are provided; and examples of calculations and illustrations of completed forms are included. The manual explains the major tasks of an economic analysis, including identifying the problem, selecting realistic alternatives for solving it, formulating appropriate assumptions, determining the costs and benefits of the alternatives, comparing the alternatives, testing the sensitivity of major uncertainties, and ranking the alternatives. Appendixes are included that contain data, indexes, and worksheets to aid in performing the economic analyses. For reference, Volume 2 contains sample economic analyses that illustrate how each form is filled out and that include a complete example of the documentation required

  3. Military construction program economic analysis manual: Text and appendixes: Hazardous Waste Remedial Actions Program

    International Nuclear Information System (INIS)

    1987-12-01

    This manual enables the US Air Force to comprehensively and systematically analyze alternative approaches to meeting its military construction requirements. The manual includes step-by-step procedures for completing economic analyses for military construction projects, beginning with determining if an analysis is necessary. Instructions and a checklist of the tasks involved for each step are provided; and examples of calculations and illustrations of completed forms are included. The manual explains the major tasks of an economic analysis, including identifying the problem, selecting realistic alternatives for solving it, formulating appropriate assumptions, determining the costs and benefits of the alternatives, comparing the alternatives, testing the sensitivity of major uncertainties, and ranking the alternatives. Appendixes are included that contain data, indexes, and worksheets to aid in performing the economic analyses. For reference, Volume 2 contains sample economic analyses that illustrate how each form is filled out and that include a complete example of the documentation required. 6 figs., 12 tabs

  4. Examinations on Applications of Manual Calculation Programs on Lung Cancer Radiation Therapy Using Analytical Anisotropic Algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jung Min; Kim, Dae Sup; Hong, Dong Ki; Back, Geum Mun; Kwak, Jung Won [Dept. of Radiation Oncology, , Seoul (Korea, Republic of)

    2012-03-15

    There was a problem with using MU verification programs for the reasons that there were errors of MU when using MU verification programs based on Pencil Beam Convolution (PBC) Algorithm with radiation treatment plans around lung using Analytical Anisotropic Algorithm (AAA). On this study, we studied the methods that can verify the calculated treatment plans using AAA. Using Eclipse treatment planning system (Version 8.9, Varian, USA), for each 57 fields of 7 cases of Lung Stereotactic Body Radiation Therapy (SBRT), we have calculated using PBC and AAA with dose calculation algorithm. By developing MU of established plans, we compared and analyzed with MU of manual calculation programs. We have analyzed relationship between errors and 4 variables such as field size, lung path distance of radiation, Tumor path distance of radiation, effective depth that can affect on errors created from PBC algorithm and AAA using commonly used programs. Errors of PBC algorithm have showned 0.2{+-}1.0% and errors of AAA have showned 3.5{+-}2.8%. Moreover, as a result of analyzing 4 variables that can affect on errors, relationship in errors between lung path distance and MU, connection coefficient 0.648 (P=0.000) has been increased and we could calculate MU correction factor that is A.E=L.P 0.00903+0.02048 and as a result of replying for manual calculation program, errors of 3.5{+-}2.8% before the application has been decreased within 0.4{+-}2.0%. On this study, we have learned that errors from manual calculation program have been increased as lung path distance of radiation increases and we could verified MU of AAA with a simple method that is called MU correction factor.

  5. Examinations on Applications of Manual Calculation Programs on Lung Cancer Radiation Therapy Using Analytical Anisotropic Algorithm

    International Nuclear Information System (INIS)

    Kim, Jung Min; Kim, Dae Sup; Hong, Dong Ki; Back, Geum Mun; Kwak, Jung Won

    2012-01-01

    There was a problem with using MU verification programs for the reasons that there were errors of MU when using MU verification programs based on Pencil Beam Convolution (PBC) Algorithm with radiation treatment plans around lung using Analytical Anisotropic Algorithm (AAA). On this study, we studied the methods that can verify the calculated treatment plans using AAA. Using Eclipse treatment planning system (Version 8.9, Varian, USA), for each 57 fields of 7 cases of Lung Stereotactic Body Radiation Therapy (SBRT), we have calculated using PBC and AAA with dose calculation algorithm. By developing MU of established plans, we compared and analyzed with MU of manual calculation programs. We have analyzed relationship between errors and 4 variables such as field size, lung path distance of radiation, Tumor path distance of radiation, effective depth that can affect on errors created from PBC algorithm and AAA using commonly used programs. Errors of PBC algorithm have showned 0.2±1.0% and errors of AAA have showned 3.5±2.8%. Moreover, as a result of analyzing 4 variables that can affect on errors, relationship in errors between lung path distance and MU, connection coefficient 0.648 (P=0.000) has been increased and we could calculate MU correction factor that is A.E=L.P 0.00903+0.02048 and as a result of replying for manual calculation program, errors of 3.5±2.8% before the application has been decreased within 0.4±2.0%. On this study, we have learned that errors from manual calculation program have been increased as lung path distance of radiation increases and we could verified MU of AAA with a simple method that is called MU correction factor.

  6. The Montana Rivers Information System: Edit/entry program user`s manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    The Montana Rivers Information System (MRIS) was initiated to assess the state`s fish, wildlife, and recreation value; and natural cultural and geologic features. The MRIS is now a set of data bases containing part of the information in the Natural Heritage Program natural features and threatened and endangered species data bases. The purpose of this User`s Manual is to: (1) describe to the user how to maintain the MRIS database of their choice by updating, changing, deleting, and adding records using the edit/entry programs; and (2) provide to the user all information and instructions necessary to complete data entry into the MRIS databases.

  7. New FORTRAN computer programs to acquire and process isotopic mass spectrometric data: Operator's manual

    International Nuclear Information System (INIS)

    Smith, D.H.; McKown, H.S.

    1993-09-01

    This TM is one of a pair that describes ORNL-developed software for acquisition and processing of isotope ratio mass spectral data. This TM is directed at the laboratory analyst. No technical knowledge of the programs and programming is required. It describes how to create and edit files, how to acquire and process data, and how to set up files to obtain the desired results. The aim of this TM is to serve as a utilitarian instruction manual, a open-quotes how toclose quotes approach rather than a open-quotes why?close quotes

  8. FURNACE; a toroidal geometry neutronic program system method description and users manual

    International Nuclear Information System (INIS)

    Verschuur, K.A.

    1984-12-01

    The FURNACE program system performs neutronic and photonic calculations in 3D toroidal geometry for application to fusion reactors. The geometry description is quite general, allowing any torus cross section and any neutron source density distribution for the plasma, as well as simple parametric representations of circular, elliptic and D-shaped tori and plasmas. The numerical method is based on an approximate transport model that produces results with sufficient accuracy for reactor-design purposes, at acceptable calculational costs. A short description is given of the numerical method, and a user manual for the programs of the system: FURNACE, ANISN-PT, LIBRA, TAPEMA and DRAWER is presented

  9. Designing an Academic Project Management Program: A Collaboration between a University and a PMI Chapter

    Science.gov (United States)

    Poston, Robin S.; Richardson, Sandra M.

    2011-01-01

    The demand for project management skills in industry is increasing resulting in a higher demand for project management educational programs. Universities are addressing industry demand by developing project management courses, degree offerings and certificate programs that focus on both technical and general project management skills. While…

  10. EN-ACT: Black Women's Identity in Action. A Facilitator's Workshop Manual.

    Science.gov (United States)

    Coe, Sherri N.; Morgan, Rosalind A.

    This workshop manual is intended for use by counselors, psychologists, and community and social workers. It may be used as an adult developmental activity, for black women 18 or older, at the secondary and post-secondary levels, as part of a women's cultural studies program, or as a continuing education offering. Chapter 1 of the manual provides a…

  11. National Household Education Surveys Program of 2012: Data File User's Manual. Parent and Family Involvement in Education Survey. Early Childhood Program Participation Survey. NCES 2015-030

    Science.gov (United States)

    McPhee, C.; Bielick, S.; Masterton, M.; Flores, L.; Parmer, R.; Amchin, S.; Stern, S.; McGowan, H.

    2015-01-01

    The 2012 National Household Education Surveys Program (NHES:2012) Data File User's Manual provides documentation and guidance for users of the NHES:2012 data files. The manual provides information about the purpose of the study, the sample design, data collection procedures, data processing procedures, response rates, imputation, weighting and…

  12. Analytical methods manual for the Mineral Resource Surveys Program, U.S. Geological Survey

    Science.gov (United States)

    Arbogast, Belinda F.

    1996-01-01

    The analytical methods validated by the Mineral Resource Surveys Program, Geologic Division, is the subject of this manual. This edition replaces the methods portion of Open-File Report 90-668 published in 1990. Newer methods may be used which have been approved by the quality assurance (QA) project and are on file with the QA coordinator.This manual is intended primarily for use by laboratory scientists; this manual can also assist laboratory users to evaluate the data they receive. The analytical methods are written in a step by step approach so that they may be used as a training tool and provide detailed documentation of the procedures for quality assurance. A "Catalog of Services" is available for customer (submitter) use with brief listings of:the element(s)/species determined,method of determination,reference to cite,contact person,summary of the technique,and analyte concentration range.For a copy please contact the Branch office at (303) 236-1800 or fax (303) 236-3200.

  13. The Development of a Postgraduate Orthopaedic Manual Therapy Residency Program in Nairobi, Kenya

    Directory of Open Access Journals (Sweden)

    Shala Cunningham

    2017-06-01

    Full Text Available IntroductionThere are very few opportunities for long-term, comprehensive postgraduate education in developing countries because of fiscal and human resource constraints. Therefore, physiotherapists have little opportunity following graduation to advance their skills through the improvement of clinical reasoning and treatment planning and application.BackgroundTo address the need for sustainable advanced instruction in physiotherapy within the country, a postgraduate Residency program was initiated in Nairobi, Kenya in 2012. The mission of the program is to graduate advanced orthopedic practitioners who can lead their communities and local profession in the advancement of clinical care and education. Since its inception, six cohorts have been initiated for a total of 90 resident participants. In addition, six program graduates are being trained to continue the Residency program and are serving as teaching assistants for the on campus modules. This training will result in a self-sustaining program by 2020.DiscussionThe manual therapy Residency education model allowed for advancement of the participating physiotherapists professional development utilizing evidence-based practice. This was done without altering the current education system within the country, or accessing expensive equipment.Concluding remarksThe Residency program was developed and established with the cooperation of a local education institution and a non-profit corporation in the United States. This collaboration has facilitated the advancement of orthopedic clinical standards in the country and will, hopefully, one day serve an as a template for future programs.

  14. The Development of a Postgraduate Orthopaedic Manual Therapy Residency Program in Nairobi, Kenya.

    Science.gov (United States)

    Cunningham, Shala; Jackson, Richard; Muli, Daniel Kangutu; McFelea, Joni

    2017-01-01

    There are very few opportunities for long-term, comprehensive postgraduate education in developing countries because of fiscal and human resource constraints. Therefore, physiotherapists have little opportunity following graduation to advance their skills through the improvement of clinical reasoning and treatment planning and application. To address the need for sustainable advanced instruction in physiotherapy within the country, a postgraduate Residency program was initiated in Nairobi, Kenya in 2012. The mission of the program is to graduate advanced orthopedic practitioners who can lead their communities and local profession in the advancement of clinical care and education. Since its inception, six cohorts have been initiated for a total of 90 resident participants. In addition, six program graduates are being trained to continue the Residency program and are serving as teaching assistants for the on campus modules. This training will result in a self-sustaining program by 2020. The manual therapy Residency education model allowed for advancement of the participating physiotherapists professional development utilizing evidence-based practice. This was done without altering the current education system within the country, or accessing expensive equipment. The Residency program was developed and established with the cooperation of a local education institution and a non-profit corporation in the United States. This collaboration has facilitated the advancement of orthopedic clinical standards in the country and will, hopefully, one day serve an as a template for future programs.

  15. ENERGY EFFICIENT BUILDINGS PROGRAM. CHAPTER FROM THE ENERGY AND ENVIRONMENT DIVISION ANNUAL REPORT 1979

    Energy Technology Data Exchange (ETDEWEB)

    Authors, Various

    1979-12-01

    The research reported in this volume was undertaken during FY 1979 within the Energy & Environment Division of the Lawrence Berkeley Laboratory. This volume will comprise a section of the Energy & Environment Division 1979 Annual Report, to be published in the summer of 1980. Work reported relate to: thermal performance of building envelopes; building ventilation and indoor air quality; a computer program for predicting energy use in buildings; study focused specifically on inherently energy intensive hospital buildings; energy efficient windows and lighting; potential for energy conservation and savings in the buildings sector; and evaluation of energy performance standards for residential buildings.

  16. Timergenerator circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Timer/Generator Circuits Manual is an 11-chapter text that deals mainly with waveform generator techniques and circuits. Each chapter starts with an explanation of the basic principles of its subject followed by a wide range of practical circuit designs. This work presents a total of over 300 practical circuits, diagrams, and tables.Chapter 1 outlines the basic principles and the different types of generator. Chapters 2 to 9 deal with a specific type of waveform generator, including sine, square, triangular, sawtooth, and special waveform generators pulse. These chapters also include pulse gen

  17. Montana Rivers Information System : Edit/Entry Program User's Manual.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration; Montana Department of Fish, Wildlife and Parks

    1992-07-01

    The Montana Rivers Information System (MRIS) was initiated to assess the state`s fish, wildlife, and recreation value; and natural cultural, and geologic features. The MRIS is now a set of data bases containing part of the information in the Natural Heritage Program natural features and threatened and endangered species data bases and comprises of the Montana Interagency Stream Fisheries Database; the MDFWP Recreation Database; and the MDFWP Wildlife Geographic Information System. The purpose of this User`s Manual is to describe to the user how to maintain the MRIS database of their choice by updating, changing, deleting, and adding records using the edit/entry programs; and to provide to the user all information and instructions necessary to complete data entry into the MRIS databases.

  18. Program user's manual: cryogen system for the analysis for the Mirror Fusion Test Facility

    International Nuclear Information System (INIS)

    1979-04-01

    The Mirror Fusion Test Facility being designed and constructed at the Lawrence Livermore Laboratory requires a liquid helium liquefaction, storage, distribution, and recovery system and a liquid nitrogen storage and distribution system. To provide a powerful analytical tool to aid in the design evolution of this system through hardware, a thermodynamic fluid flow model was developed. This model allows the Lawrence Livermore Laboratory to verify that the design meets desired goals and to play what if games during the design evolution. For example, what if the helium flow rate is changed in the magnet liquid helium flow loop; how does this affect the temperature, fluid quality, and pressure. This manual provides all the information required to run all or portions of this program as desired. In addition, the program is constructed in a modular fashion so changes or modifications can be made easily to keep up with the evolving design

  19. An Administrator's Manual for Planning, Developing, and Implementing Mainstream, Self-Contained, or Co-op Programs for the Disadvantaged.

    Science.gov (United States)

    Pennsylvania State Univ., University Park. Div. of Occupational and Vocational Studies.

    This administrator's manual contains guidelines for planning, developing, and implementing mainstream, self-contained, or cooperative work experience programs for the disadvantaged. Outlined in the introductory section are the philosophy underlying programs for the disadvantaged, procedures to determine student eligibility, signals indicating the…

  20. The Waiter and Waitress Training Manual. Revised Edition.

    Science.gov (United States)

    Mitchell, Barbara J.

    This manual is intended for use in pre-employment or upgrading training programs for persons who are planning to work or are presently working in the hotel and restaurant food service industry. Eleven chapters cover interpersonal relationships with employers, fellow employees, and customers; grooming and personal hygiene; sanitary food handling;…

  1. Users manual for an expert system (HSPEXP) for calibration of the hydrological simulation program; Fortran

    Science.gov (United States)

    Lumb, A.M.; McCammon, R.B.; Kittle, J.L.

    1994-01-01

    Expert system software was developed to assist less experienced modelers with calibration of a watershed model and to facilitate the interaction between the modeler and the modeling process not provided by mathematical optimization. A prototype was developed with artificial intelligence software tools, a knowledge engineer, and two domain experts. The manual procedures used by the domain experts were identified and the prototype was then coded by the knowledge engineer. The expert system consists of a set of hierarchical rules designed to guide the calibration of the model through a systematic evaluation of model parameters. When the prototype was completed and tested, it was rewritten for portability and operational use and was named HSPEXP. The watershed model Hydrological Simulation Program--Fortran (HSPF) is used in the expert system. This report is the users manual for HSPEXP and contains a discussion of the concepts and detailed steps and examples for using the software. The system has been tested on watersheds in the States of Washington and Maryland, and the system correctly identified the model parameters to be adjusted and the adjustments led to improved calibration.

  2. A piano training program to improve manual dexterity and upper extremity function in chronic stroke survivors

    Directory of Open Access Journals (Sweden)

    Myriam eVilleneuve

    2014-08-01

    Full Text Available Objective: Music-supported therapy was shown to induce improvements in motor skills in stroke survivors. Whether all stroke individuals respond similarly to the intervention and whether gains can be maintained over time remain unknown. We estimated the immediate and retention effects of a piano training program on upper extremity function in persons with chronic stroke. Methods: Thirteen stroke participants engaged in a 3-week piano training comprising of supervised sessions (9 x 60min and home practice. Fine and gross manual dexterity, movement coordination and functional use of the upper extremity were assessed at baseline, pre-intervention, post-intervention and at a 3-week follow-up. Results: Significant improvements were observed for all outcomes at post-intervention and follow-up, compared to pre-intervention scores. Larger magnitudes of change in manual dexterity and functional use of the upper extremity were associated with higher initial levels of motor recovery. Conclusions: Piano training can result in sustainable improvements in upper extremity function in chronic stroke survivors. Individuals with a higher initial level of motor recovery at baseline appear to benefit the most from this intervention.

  3. Quality assurance program manual for nuclear power plants. Volume I. Policies

    International Nuclear Information System (INIS)

    1975-01-01

    Policies and procedures are presented which comply with current NRC regulatory requirements and industry codes and standards in effect during the design, procurement, construction, testing, operation, refueling, maintenance, repair and modification activities associated with nuclear power plants. Specific NRC and industry documents that contain the requirements, including the issue dates in effect, are identified in each nuclear power plant's Safety Analysis Report. The requirements established by these documents form the basis for the Consumers Power Quality Assurance Program, which is implemented to control those structures, systems, components and operational safety actions listed in each nuclear power plant's Quality List (Q-List). As additional and revised requirements are issued by the NRC and professional organizations involved in nuclear activities, they will be reviewed for their impact on this manual, and changes will be made where considered necessary

  4. An introduction to use of the USACE HTRW program's data validation guidelines engineering manual

    International Nuclear Information System (INIS)

    Becker, L.D.; Coats, K.H.

    1994-01-01

    Data validation has been defined by regulatory agencies as a systematic process (consisting of data editing, screening, checking, auditing, verification, certification, and review) for comparing data to established criteria in order to provide assurance that data are adequate for their intended use. A problem for the USACE HTRW Program was that clearly defined data validation guidelines were available only for analytical data quality level IV. These functional data validation guidelines were designed for validation of data produced using protocols from the US E.P.A.'s Contract Laboratory Program (CLP). Unfortunately, USACE experience demonstrates that these level IV functional data validation guidelines were being used to validate data not produced under the CLP. The resulting data validation product was less than satisfactory for USACE HTRW needs. Therefore, the HTRW-MCX initiated an Engineering Manual (EM) for validation of analytical data quality levels other than IV. This EM is entitle ''USACE HTRW Data Validation Guidelines.'' Use of the EM is required for validation of analytical data relating to projects under the jurisdiction of the Department of the Army, Corps of Engineers, Hazardous, Toxic, and Radioactive Waste Program. These data validation guidelines include procedures and checklists for technical review of analytical data at quality levels I, II, III, and V

  5. California Publicly-Owned Utilities (POUs) – LBNL ‘Beyond Widgets’ Project. Task: ambient lighting and occupancy-based plug load control. System Program Manual

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, Alastair; Mathew, Paul A.; Regnier, Cynthia; Schwartz, Peter; Schakelford, Jordan; Walter, Travis

    2017-09-01

    This program manual contains detailed technical information for implementing an incentive program for task-ambient lighting and occupancy-based plug load control. This manual was developed by Lawrence Berkeley National Laboratory, in collaboration with the California Publicly-Owned Utilities (CA POUs) as a partner in the ‘Beyond Widgets’ program funded by the U.S. Department of Energy Building Technologies Office. The primary audience for this manual is the program staff of the various CA POUs. It may also be used by other utility incentive programs to help develop similar programs. It is anticipated that the content of this manual be utilized by the CA POU staff for developing related documents such as the Technical Resource Manual and other filings pertaining to the rollout of an energy systems-based rebate incentive program.

  6. Effectiveness of an Attachment-Focused Manualized Intervention for Parents of Teens at Risk for Aggressive Behaviour: The Connect Program

    Science.gov (United States)

    Moretti, Marlene M.; Obsuth, Ingrid

    2009-01-01

    Aggressive, violent and antisocial behaviour in children and adolescents is a growing concern across the globe. Targeting parent-teen relationships is critical in reducing problem behaviour. "Connect" is a manualized ten-week program for parents or alternative caregivers of at-risk teens that focuses on the building blocks of secure attachment:…

  7. Medical Record Clerk Training Program, Course of Study; Student Manual: For Medical Record Personnel in Small Rural Hospitals in Colorado.

    Science.gov (United States)

    Community Health Service (DHEW/PHS), Arlington, VA. Div. of Health Resources.

    The manual provides major topics, objectives, activities and, procedures, references and materials, and assignments for the training program. The topics covered are hospital organization and community role, organization and management of a medical records department, international classification of diseases and operations, medical terminology,…

  8. 25 CFR 900.5 - Effect of these regulations on Federal program guidelines, manual, or policy directives.

    Science.gov (United States)

    2010-04-01

    ... SELF-DETERMINATION AND EDUCATION ASSISTANCE ACT General Provisions § 900.5 Effect of these regulations... 25 Indians 2 2010-04-01 2010-04-01 false Effect of these regulations on Federal program guidelines, manual, or policy directives. 900.5 Section 900.5 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE...

  9. 106-17 Telemetry Standards Chapter 1

    Science.gov (United States)

    2017-07-01

    Telemetry Standards, RCC Standard 106-17 Chapter 1, July 2017 1-1 CHAPTER 1 Introduction The Telemetry Standards address the here-to-date...for Federal Radio Frequency Management . Copies of that manual may be obtained from: Executive Secretary, Interdepartmental Radio Advisory Committee

  10. Radiological Safety Analysis Computer (RSAC) Program Version 7.0 Users’ Manual

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Bradley J Schrader

    2009-03-01

    The Radiological Safety Analysis Computer (RSAC) Program Version 7.0 (RSAC-7) is the newest version of the RSAC legacy code. It calculates the consequences of a release of radionuclides to the atmosphere. A user can generate a fission product inventory from either reactor operating history or a nuclear criticality event. RSAC-7 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates the decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated for inhalation, air immersion, ground surface, ingestion, and cloud gamma pathways. RSAC-7 can be used as a tool to evaluate accident conditions in emergency response scenarios, radiological sabotage events and to evaluate safety basis accident consequences. This users’ manual contains the mathematical models and operating instructions for RSAC-7. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-7. This program was designed for users who are familiar with radiological dose assessment methods.

  11. Radiological Safety Analysis Computer (RSAC) Program Version 7.2 Users’ Manual

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Bradley J Schrader

    2010-10-01

    The Radiological Safety Analysis Computer (RSAC) Program Version 7.2 (RSAC-7) is the newest version of the RSAC legacy code. It calculates the consequences of a release of radionuclides to the atmosphere. A user can generate a fission product inventory from either reactor operating history or a nuclear criticality event. RSAC-7 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates the decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated for inhalation, air immersion, ground surface, ingestion, and cloud gamma pathways. RSAC-7 can be used as a tool to evaluate accident conditions in emergency response scenarios, radiological sabotage events and to evaluate safety basis accident consequences. This users’ manual contains the mathematical models and operating instructions for RSAC-7. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-7. This program was designed for users who are familiar with radiological dose assessment methods.

  12. Radiological Safety Analysis Computer (RSAC) Program Version 7.0 Users Manual

    International Nuclear Information System (INIS)

    Schrader, Bradley J.

    2009-01-01

    The Radiological Safety Analysis Computer (RSAC) Program Version 7.0 (RSAC-7) is the newest version of the RSAC legacy code. It calculates the consequences of a release of radionuclides to the atmosphere. A user can generate a fission product inventory from either reactor operating history or a nuclear criticality event. RSAC-7 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates the decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated for inhalation, air immersion, ground surface, ingestion, and cloud gamma pathways. RSAC-7 can be used as a tool to evaluate accident conditions in emergency response scenarios, radiological sabotage events and to evaluate safety basis accident consequences. This users manual contains the mathematical models and operating instructions for RSAC-7. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-7. This program was designed for users who are familiar with radiological dose assessment methods

  13. SCALPLO - a universal program for plotting flux output from SCALE modules and related programs. User's manual

    International Nuclear Information System (INIS)

    Hersman, A.; Leege, P.F.A. de; Hoogenboom, J.E.

    1992-04-01

    The FORTRAN-77 program SCALPLO is being developed to make an easy and quick graphic survey of flux and/or power data calculated with SCALE modules or other core calculation or shielding codes. The basic plot functions it can perform are one- and two-dimensional plots of flux or power distributions and flux energy spectra. More specifically it can produce plots of the flux distribution in a one-dimensional geometry for one or more energy groups in one figure. It can also plot the flux distribution along a cut through a two- or three-dimensional geometry along one of the coordinate axes and it can plot a two-dimensional view of the flux distribution of a two-dimensional geometry or of a plane cut through a three-dimensional geometry. The same can be done for the power distribution in a system. Furthermore SCALPLO can plot the particle flux spectrum as a function of energy, either as group fluxes or as group fluxes per unit energy or per unit lethargy. (orig./HP)

  14. Code development and analysis program. RELAP4/MOD7 (Version 2): user's manual

    International Nuclear Information System (INIS)

    1978-08-01

    This manual describes RELAP4/MOD7 (Version 2), which is the latest version of the RELAP4 LPWR blowdown code. Version 2 is a precursor to the final version of RELAP4/MOD7, which will address LPWR LOCA analysis in integral fashion (i.e., blowdown, refill, and reflood in continuous fashion). This manual describes the new code models and provides application information required to utilize the code. It must be used in conjunction with the RELAP4/MOD5 User's Manual (ANCR-NUREG-1335, dated September 1976), and the RELAP4/MOD6 User's Manual

  15. Manual for environmental radiological surveillance

    International Nuclear Information System (INIS)

    Sumiya, Shuichi; Matsuura, Kenichi; Nakano, Masanao; Takeyasu, Masanori; Morisawa, Masato; Onuma, Toshimitsu; Fujita, Hiroki; Mizutani, Tomoko; Watanabe, Hajime; Sugai, Masamitsu

    2010-03-01

    Environmental radiation monitoring around the Tokai Reprocessing Plant has been conducted by the Nuclear Fuel Cycle Engineering Laboratories, based on 'Safety Regulations for the Reprocessing Plant of JAEA, Chapter IV - Environmental monitoring' and Environmental Radiation Monitoring Program decided by the Ibaraki prefectural government. The radiation monitoring installations and equipments were also prepared for emergency. This manual describes; (1) the installations of radiological measurement, (2) the installations of meteorological observation, and (3) environmental data processing system for executing the terrestrial environmental monitoring by Environmental Protection Section, Radiation Protection Department. The environmental monitoring has been operated through the manual published in 1993 (PNC TN8520 93-001). Then the whole articles were revised because the partially of installations and equipments having been updated in recent years. (author)

  16. A fast reactor transient analysis methodology for PCs: Volume 3, LTC program manual of the QuickBASIC code

    International Nuclear Information System (INIS)

    Ott, K.O.; Chung, L.

    1992-06-01

    This manual augments the detailed manual of the GW-BASIC version of the LTC code for an application in QuickBASIC. As most of the GW-BASIC coding of this program for ''LMR Transient Calculations'' is compatible with QuickBASIC, this manual pertains primarily to the required changes, such as the handling of input and output. The considerable reduction in computation time achieved by this conversion is demonstrated for two sample problems, using a variety of hardware and execution options. The revised code is listed. Although the severe storage limitations of GW-BASIC no longer apply, the LOF transient path has not been completed in this QuickBASIC code. Its advantages are thus primarily in the much faster running time for TOP and LOHS transients. For the fastest PC hardware (486) and execution option the computation time is reduced by a factor of 124 compared to GW-BASIC on a 386/20

  17. Pit slope manual chapter 3. Mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Gyenge, M.; Herget, G.

    1977-01-01

    Guidance is given on the procedures required to obtain adequate knowledge of the mechanical properties of the soils and rocks which constitute the walls of the pit. The reason why certain data is necessary is explained and the tests required to obtain these data are described.

  18. Kentucky Disability Resource Manual: A Handbook of Program Descriptions, Eligibility Criteria, and Contact Information. Updated

    Science.gov (United States)

    Human Development Institute, 2016

    2016-01-01

    This manual was designed primarily for use by individuals with developmental disabilities and related conditions. It is hoped that it is also useful for families, as well as service coordinators and providers who directly assist families and individuals with developmental disabilities. The focus of this manual is to provide easy-to-read…

  19. Follow 1.1 - a program for visualization of Thermal-Hydraulic computer simulations. User's manual

    International Nuclear Information System (INIS)

    Hyvarinen, J.

    1990-04-01

    FOLLOW is a computer program designed to function as an analyst's aid when performing large thermalhydraulic and related safety calculations using the well known simulation codes RELAP5, MELCOR, SMABRE and TRAB. The code is a by-product of the effort to improve the analysis capabilities of the Finnish Centre for Radiation and Nuclear Safety (STUK). FOLLOW's most important application is as an on-line 'window' into the progress of the simulation calculation. The thermal-hydraulic analyses related to nuclear safety routinely require very long calculation times. FOLLOW provides a possibility to follow the course of the simulation and thus make observations of the results already during the simulation. FOLLOW's various outputs have been designed to mimic those available at nuclear power plant operators' console. Thus FOLLOW can also be used much like a nuclear power plant simulator. This manual describes the usages, features and input requirements of FOLLOW version 1.1, including a sample problem input and various outputs. (orig.)

  20. Solutions manual to accompany finite mathematics models and applications

    CERN Document Server

    Morris, Carla C

    2015-01-01

    A solutions manual to accompany Finite Mathematics: Models and Applications In order to emphasize the main concepts of each chapter, Finite Mathematics: Models and Applications features plentiful pedagogical elements throughout such as special exercises, end notes, hints, select solutions, biographies of key mathematicians, boxed key principles, a glossary of important terms and topics, and an overview of use of technology. The book encourages the modeling of linear programs and their solutions and uses common computer software programs such as LINDO. In addition to extensive chapters on pr

  1. Oil trading manual

    International Nuclear Information System (INIS)

    Long, D.

    1995-01-01

    This manual provides basic information on all aspects of oil trading. Topics reviewed in Part 1 include physical characteristics and refining and oil pricing arrangements. Part 2 on instruments and markets contains chapters on crude oil markets, product markets, forward and futures contracts, forward paper markets, oil future exchanges, options, swaps and long term oil markets. Part 3 deals with administration and has chapters on operations and logistics, credit control, accounting, taxation of oil trading, contracts and legal and regulatory issues. (UK)

  2. Manual for research, development and technology program and project evaluations : final report.

    Science.gov (United States)

    2016-04-01

    This manual provides the Federal Railroad Administrations (FRA) Office of Research, Development and Technology (RD&T) a : framework, standards, and procedures for planning, conducting, reporting, and using sound evaluations of RD&Ts projects fo...

  3. American Red Cross Chapter Regions

    Data.gov (United States)

    Department of Homeland Security — The Regions are part of the national field level structure to support chapters. The Regions role is admistrative as well as provides oversight and program technical...

  4. Classification of Living Things. A Teacher's Manual for General Level Program Development. Grades 7 and 8. Science and Society Teaching Units. Informal Series/55.

    Science.gov (United States)

    Roberts, Douglas A.; And Others

    This manual is one of a series designed to assist junior high school teachers in developing general level or non-academic science programs which focus on the relationship between science and society. Although designed primarily for grades 7 and 8, the content is also suitable for students in grade 6. The major portion of the manual consists of six…

  5. Chapter Four

    African Journals Online (AJOL)

    User

    The child acquires knowledge of this language from his immediate family ... Many programs also seek to develop literacy in the native language. ..... be a growing movement to stabilize and revitalize indigenous languages and cultures. As.

  6. Hoisting and rigging manual: Uncontrolled document

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-05-01

    This document is a draft copy of a Hoisting and Rigging Manual for the Department of Energy. The manual is divided into ten chapters. The chapter titles follow: terminology and definitions; operator training and qualification; overhead and gantry cranes; mobile cranes; forklift trucks; hoists; hooks; wire rope, slings, and rigging accessories; construction hoisting and rigging equipment requirements; references.

  7. Ciencias 2. Manual do Professor (Science Teacher's Manual).

    Science.gov (United States)

    Raposo, Lucilia

    This is the teacher's manual for Ciencias 2, the second in a series of elementary science textbooks for Portuguese-speaking students. The student textbook contains 10 chapters and 57 activities. The teacher's manual presents an explanation of the educational goals and the organization of the content, Topics included are environment, the human,…

  8. Career development through local chapter involvement: perspectives from chapter members.

    Science.gov (United States)

    Thomas, Melissa; Inniss-Richter, Zipporah; Mata, Holly; Cottrell, Randall R

    2013-07-01

    The importance of career development in professional organizations has been noted in the literature. Personal and professional benefits of membership regardless of discipline can be found across the career spectrum from student to executive. The benefits of professional membership with respect to career development in local chapter organizations have seldom been studied. Local chapter participation may offer significant career development opportunities for the practitioner, faculty member, and student. The purpose of this study was to explore the importance of local chapter involvement to the career development of health education practitioners. An 18-item questionnaire was disseminated to the membership of three local SOPHE (Society for Public Health Education) chapters that explored the level of local chapter involvement and the impact of how specific professional development activities impacted career development. The results of the survey highlighted the importance of continuing education programs, networking, and leadership experience in developing one's career that are offered by local SOPHE chapter involvement. Making a positive impact in the community and earning the respect of one's peers were most often reported as indicators of career success. These factors can directly impact local chapter participation. Career development can certainly be enhanced by active participation in the local chapter of a professional association.

  9. CHAPTER 1

    African Journals Online (AJOL)

    Dr Olaleye

    Apoptosis plays an important role in the treatment of cancer, as it is a common target of many treatment schemes. We aim to investigate the expression of and relationship between PD-1, PD-L1 and PD-L2 in OSCC. This is important because there are now immunotherapies that target the cell programmed death pathway.

  10. CHAPTER 11

    African Journals Online (AJOL)

    Uchitelle-Pierce, Benjamin (HarvestPlus)

    children by improving the access, availability and utilization of biofortified crops that ... partners, the HarvestPlus program is working to further develop and widely ..... celebrities to create a movie titled “The Yellow Cassava,” which was ...

  11. GERTS GQ User's Manual.

    Science.gov (United States)

    Akiba, Y.; And Others

    This user's manual for the simulation program Graphical Evaluation and Review Technique (GERT) GQ contains sections on nodes, branches, program input description and format, and program output, as well as examples. Also included is a programmer's manual which contains information on scheduling, subroutine descriptions, COMMON Variables, and…

  12. The performance of an automatic acoustic-based program classifier compared to hearing aid users' manual selection of listening programs.

    Science.gov (United States)

    Searchfield, Grant D; Linford, Tania; Kobayashi, Kei; Crowhen, David; Latzel, Matthias

    2018-03-01

    To compare preference for and performance of manually selected programmes to an automatic sound classifier, the Phonak AutoSense OS. A single blind repeated measures study. Participants were fit with Phonak Virto V90 ITE aids; preferences for different listening programmes were compared across four different sound scenarios (speech in: quiet, noise, loud noise and a car). Following a 4-week trial preferences were reassessed and the users preferred programme was compared to the automatic classifier for sound quality and hearing in noise (HINT test) using a 12 loudspeaker array. Twenty-five participants with symmetrical moderate-severe sensorineural hearing loss. Participant preferences of manual programme for scenarios varied considerably between and within sessions. A HINT Speech Reception Threshold (SRT) advantage was observed for the automatic classifier over participant's manual selection for speech in quiet, loud noise and car noise. Sound quality ratings were similar for both manual and automatic selections. The use of a sound classifier is a viable alternative to manual programme selection.

  13. Ostomy Home Skills Program

    Medline Plus

    Full Text Available ... ACS Chapters Find a Chapter Chapter Guidebook Chapter Meetings ACS Events for Chapters Chapter Advocacy International Surgeons ... YFA I Want to Be a YFA Leader Meetings and Events YFA Mentor Programs YFA Speakers Bureau ...

  14. Manual Laboratorio de Microbiologia. Documento de trabajo Programa de Educacion en Ocupaciones de Salud (Microbiology Laboratory Manual. Curriculum Document. Program of Education in Health Occupations).

    Science.gov (United States)

    Puerto Rico State Dept. of Education, Hato Rey. Area for Vocational and Technical Education.

    This laboratory manual on microbiology begins with an introduction relating the study of microorganisms to health occupations education and stressing the importance of teaching critical thinking. The introduction is followed by general instructions for the use of the manual and an illustration of hand washing procedures. The 13 laboratory…

  15. Matematica 3. Manual.

    Science.gov (United States)

    D'Alu, Maria Jose Miranda de Sousa

    This teachers manual accompanies a mathematics textbook, written in Portuguese, for third graders. It closely follows the objectives and methodology of the major curricula used throughout the schools in the United States. The 11 chapters deal with: numeration (0-999,999); addition with and without regrouping; subtraction with and without…

  16. Rescue Manual. Module 6.

    Science.gov (United States)

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The sixth of 10 modules contains 4 chapters: (1) industrial rescue; (2) rescue from a confined space; (3) extrication from heavy equipment; and (4) rescue operations involving elevators. Key points, an introduction, and conclusion accompany…

  17. Readers of the Round Table: The 1998 Joint Kentucky - Arizona Reading Program.

    Science.gov (United States)

    Kentucky State Dept. for Libraries and Archives, Frankfort.

    Intended to encourage children of all ages to read over the summer, this manual presents library-based programs, crafts, displays, and events with a medieval theme. The chapters of the manual are: (1) Introductory Materials; (2) Goals, Objectives and Evaluation; (3) Getting Started; (4) Common Program Structures; (5) Planning Timeline; (6)…

  18. Impacts of Outer Continental Shelf (OCS) development on recreation and tourism. Volume 5. Program logic manual

    Energy Technology Data Exchange (ETDEWEB)

    1987-04-01

    The final report for the project is presented in five volumes. This volume is the Programmer's Manual. It covers: a system overview, attractiveness component of gravity model, trip-distribution component of gravity model, economic-effects model, and the consumer-surplus model. The project sought to determine the impact of Outer Continental Shelf development on recreation and tourism.

  19. Corrections Officer Candidate Information Booklet and User's Manual. Standards and Training for Corrections Program.

    Science.gov (United States)

    California State Board of Corrections, Sacramento.

    This package consists of an information booklet for job candidates preparing to take California's Corrections Officer Examination and a user's manual intended for those who will administer the examination. The candidate information booklet provides background information about the development of the Corrections Officer Examination, describes its…

  20. Probation Officer Candidate Information Booklet and User's Manual. Standards and Training for Corrections Program.

    Science.gov (United States)

    California State Board of Corrections, Sacramento.

    This package consists of an information booklet for job candidates preparing to take California's Probation Officer Examination and a user's manual intended for those who will administer the examination. The candidate information booklet provides background information about the development and validation of the Probation Officer Examination,…

  1. Functional Behavioral Assessment: An Interactive Training Module. User's Manual & Facilitator's Guide. Second Edition.

    Science.gov (United States)

    Liaupsin, Carl J.; Scott, Terry M.; Nelson, C. Michael

    This user's manual and facilitator's guide is intended for use with an accompanying interactive CD-ROM to provide a complete training program in conducting functional behavioral assessments (FBAs) as required under the 1997 reauthorization of the Individuals with Disabilities Education Act. Chapter 1 provides general information for users, such as…

  2. The Smartphone Peer Physical Activity Counseling (SPPAC) Program for Manual Wheelchair Users: Protocol of a Pilot Randomized Controlled Trial.

    Science.gov (United States)

    Best, Krista L; Routhier, François; Sweet, Shane N; Arbour-Nicitopoulos, Kelly P; Borisoff, Jaimie F; Noreau, Luc; Martin Ginis, Kathleen A

    2017-04-26

    Physical activity (PA) must be performed regularly to accrue health benefits. However, the majority of manual wheelchair users do not meet PA recommendations. Existing community-based PA programs for manual wheelchair users appear to work, but effect sizes are small and retention is low. Existing PA programs may not fully implement some psychosocial factors that are strongly linked with PA (eg, autonomy). The use of peers and mobile phone technology in the Smartphone Peer PA Counseling (SPPAC) program represents a novel approach to cultivating a PA-supportive environment for manual wheelchair users. The primary objective is to compare change in objective PA between the experimental (SPPAC) and control groups from baseline to postintervention (10 weeks) and follow-up (3 months). Changes in and relationships between subjective PA, wheelchair skills, motivation, self-efficacy (for overcoming barriers to PA for manual wheelchair use), satisfaction of psychological needs for PA, and satisfaction with PA participation will be explored (secondary outcome). Program implementation will be explored (tertiary objective). A total of 38 community-living manual wheelchair users (≥18 years) will be recruited in a randomized controlled trial (RCT). Participants in both the control and experimental groups will receive existing PA guidelines. Participants in the experimental group will also receive the SPPAC program: 14 sessions (~30 min) over a 10-week period delivered by a peer trainer using a mobile phone. PA activities will be based on individuals' preferences and goals. Implementation of important theoretical variables will be enforced through a peer-trainer checklist. Outcomes for objective PA (primary) and subjective PA, wheelchair skills, motivation, self-efficacy, satisfaction of psychological needs, and satisfaction with participation will be collected at three time points (baseline, postintervention, follow-up). Multiple imputations will be used to treat missing data. A

  3. MINTEQ user's manual

    International Nuclear Information System (INIS)

    Peterson, S.R.; Hostetler, C.J.; Deutsch, W.J.; Cowan, C.E.

    1987-02-01

    This manual will aid the user in applying the MINTEQ geochemical computer code to model aqueous solutions and the interactions of aqueous solutions with hypothesized assemblages of solid phases. The manual will provide a basic understanding of how the MINTEQ computer code operates and the important principles that are incorporated into the code and instruct a user of the MINTEQ code on how to create input files to simulate a variety of geochemical problems. Chapters 2 through 8 are for the user who has some experience with or wishes to review the principles important to geochemical computer codes. These chapters include information on the methodology MINTEQ uses to incorporate these principles into the code. Chapters 9 through 11 are for the user who wants to know how to create input data files to model various types of problems. 35 refs., 2 figs., 5 tabs

  4. Nuclear material operations manual

    International Nuclear Information System (INIS)

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  5. Nuclear material operations manuals

    International Nuclear Information System (INIS)

    Tyler, R.P.

    1979-06-01

    This manual is intended to provide a concise and comprehensive documentation of the operating procedures currently practiced at Sandia Laboratories with regard to the management, control, and accountability of radioactive and nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  6. Nuclear material operations manual

    International Nuclear Information System (INIS)

    Tyler, R.P.; Gassman, L.D.

    1978-04-01

    This manual is intended to provide a concise and comprehensive documentation of the operating procedures currently practiced at Sandia Laboratories with regard to the management, control, and accountability of radioactive and nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations--management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of ''play-scripts'' in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  7. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Version 5.0: Data loading manual. Volume 10

    International Nuclear Information System (INIS)

    VanHorn, R.L.; Wolfram, L.M.; Fowler, R.D.; Beck, S.T.; Smith, C.L.

    1995-04-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) suite of programs can be used to organize and standardize in an electronic format information from probabilistic risk assessments or individual plant examinations. The Models and Results Database (MAR-D) program of the SAPHIRE suite serves as the repository for probabilistic risk assessment and individual plant examination data and information. This report demonstrates by examples the common electronic and manual methods used to load these types of data. It is not a stand alone document but references documents that contribute information relative to the data loading process. This document provides a more detailed discussion and instructions for using SAPHIRE 5.0 only when enough information on a specific topic is not provided by another available source

  8. IGDS/TRAP Interface Program (ITIP). Software User Manual (SUM). [network flow diagrams for coal gasification studies

    Science.gov (United States)

    Jefferys, S.; Johnson, W.; Lewis, R.; Rich, R.

    1981-01-01

    This specification establishes the requirements, concepts, and preliminary design for a set of software known as the IGDS/TRAP Interface Program (ITIP). This software provides the capability to develop at an Interactive Graphics Design System (IGDS) design station process flow diagrams for use by the NASA Coal Gasification Task Team. In addition, ITIP will use the Data Management and Retrieval System (DMRS) to maintain a data base from which a properly formatted input file to the Time-Line and Resources Analysis Program (TRAP) can be extracted. This set of software will reside on the PDP-11/70 and will become the primary interface between the Coal Gasification Task Team and IGDS, DMRS, and TRAP. The user manual for the computer program is presented.

  9. Social influence and bullying behavior: intervention-based network dynamics of the fairplayer.manual bullying prevention program.

    Science.gov (United States)

    Wölfer, Ralf; Scheithauer, Herbert

    2014-01-01

    Bullying is a social phenomenon and although preventive interventions consequently address social mechanisms, evaluations hardly consider the complexity of peer processes. Therefore, the present study analyzes the efficacy of the fairplayer.manual bullying prevention program from a social network perspective. Within a pretest-posttest control group design, longitudinal data were available from 328 middle-school students (MAge  = 13.7 years; 51% girls), who provided information on bullying behavior and interaction patterns. The revealed network parameters were utilized to examine the network change (MANCOVA) and the network dynamics (SIENA). Across both forms of analyses, findings revealed the hypothesized intervention-based decrease of bullies' social influence. Hence the present bullying prevention program, as one example of programs that successfully addresses both individual skills and social mechanisms, demonstrates the desired effect of reducing contextual opportunities for the exhibition of bullying behavior. © 2014 Wiley Periodicals, Inc.

  10. Pilot program: NRC severe reactor accident incident response training manual: Severe reactor accident overview

    International Nuclear Information System (INIS)

    McKenna, T.J.; Martin, J.A.; Miller, C.W.; Hively, L.M.; Sharpe, R.W.; Giitter, J.G.; Watkins, R.M.

    1987-02-01

    This pilot training manual has been written to fill the need for a general text on NRC response to reactor accidents. The manual is intended to be the foundation for a course for all NRC response personnel. Severe Reactor Accident Overview is the second in a series of volumes that collectively summarize the US Nuclear Regulatory Commission (NRC) emergency response during severe power reactor accidents and provide necessary background information. This volume describes elementary perspectives on severe accidents and accident assesment. Each volume serves, respectively, as the text for a course of instruction in a series of courses. Each volume is accompanied by an appendix of slides that can be used to present this material. The slides are called out in the text

  11. Pilot program: NRC severe reactor accident incident response training manual: US Nuclear Regulatory Commission response

    International Nuclear Information System (INIS)

    Sakenas, C.A.; McKenna, T.J.; Perkins, K.; Miller, C.W.; Hively, L.M.; Sharpe, R.W.; Giitter, J.G.; Watkins, R.M.

    1987-02-01

    This pilot training manual has been written to fill the need for a general text on NRC response to reactor accidents. The manual is intended to be the foundation for a course for all NRC response personnel. US Nuclear Regulatory Commission Response is the fifth in a series of volumes that collectively summarize the US Nuclear Regulatory Commission (NRC) emergency response during severe power reactor accidents and provide necessary background information. This volume describes NRC response modes, organizations, and official positions; roles of other federal agencies are also described briefly. Each volume serves, respectively, as the text for a course of instruction in a series of courses for NRC response personnel. These materials do not provide guidance or license requirements for NRC licensees. Each volume is accompanied by an appendix of slides that can be used to present this material. The slides are called out in the text

  12. Wetlands Research Program. Corps of Engineers Wetlands Delineation Manual. Appendix C. Sections 1 and 2. Region 2 - Southeast.

    Science.gov (United States)

    1987-01-01

    22 7.V.: 14 -1b Jil -7 1 N.- .- WETLANDS RESEARCH PROGRAM TECHNICAL REPORT Y-87-1 CORPS OF ENGINEERS WETLANDS DELINEATION MANUAL APPENDIX C SECTIONS ...ARMYLA- US Army Corps of Engineers Washington, DC 20314-1000 B , , , -I *. 4 -w *" APPENDIX C SECTION 1 NATIONAL LIST OF PLANT SPECIES THAT OCCUR IN...Redtop FACW A. hiernalia (Walter) B.S.P. Winter bent FAC A. scabra Wilid. Rough bentgrass FAC A. st~nfyaL. Carpet bentgrass FACW Aletris aurea

  13. Headquarters Air Force Logistics Command guidance manual for hazardous waste minimization (PACER REDUCE): Hazardous Waste Remedial Actions Program

    International Nuclear Information System (INIS)

    Jones, L.W.; Weeter, D.; Roth, J.A.; Debelak, K.A.; Bowers, A.R.

    1988-09-01

    This manual provides guidance for the Air Force Logistics Command (AFLC) Waste Minimization Program, called PACER REDUCE, and applies to all AFLC installations and personel who are responsible for implementing and monitoring activities relating to PACER REDUCE. This guidance for waste minimization provides management and technical approaches for assessing potential waste reduction techniques and for making informed decisions concerning industrial process and waste stream management. Such actions will assist in achieving regulatory compliance with the Resource Conservation and Recovery Act of 1976 as updated by the Hazardous and Solid Waste Amendments of 1984. 37 refs., 14 figs., 22 tabs

  14. A Computer Assisted Program for the Management of Acute Dental Pain: Programmer’s Manual

    Science.gov (United States)

    1990-02-06

    periodontal abscesses ?" option$(l, 1)= " 1. Yes" option$(2, 1)= " 2. No" Iongest=8 numops=2 qrow=2 qcol=5 call piques((ques$)) call prioptions ans=-O call...Osteitis (Dry Socket) DATA 20, Osseous Sequestrum DENTAL Programmer’s Manual A-94 DATA 30, Abscess /Infection/Cellulitis DATA 42, Periodontal Abscess ...DATA 53, Reversible Pulpitis DATA 64, Irreversible Pulpitis DATA 75, Acute Apical Abscess DATA 87, Acute Apical Periodontitis DATA 99, Carious Lesion

  15. Wetlands Research Program. Corps of Engineers Wetlands Delineation Manual. Appendix C. Section 1. Region O - California.

    Science.gov (United States)

    1987-01-01

    status is questioned. An X prior to the species name in the scientific name column denotes a hybrid . For purposes of this manual, all species appearing...S. Wats. Rusty molly kochia FACW K. scc’pari.a (L.) Schrader Sunmmer cypress ...actuca pu~ZchelZa (Pursh) DC. Chicory lettuce -serriola L. Prickly... lettuce FAG :antana cwnara L. Lantana% :asthenia burkei (Greene) Greene Gold-fields chry8Sstoma (Fisch. & C. A. Lasthenia Meyer) Greene Lconjtgen8 Greene

  16. Development of an in vitro laboratory manual for nuclear medicine technology students

    International Nuclear Information System (INIS)

    Meyers, A.

    1989-01-01

    This study evaluated existing in vitro education materials in qualitative and quantitative parameters that currently exist to educate potential clinicians of nationally accredited nuclear medicine programs. A review of over 300 articles, texts, and manuals pertaining to in vitro nuclear medicine procedures clearly demonstrated that no in vitro laboratory manual for undergraduate students presently exited. Every nuclear medicine program director in the United States was surveyed. They were asked for their overall philosophy in terms of developing an in vitro manual and requested to evaluate the significant of 22 general principles/concepts and 34 specific laboratory testing procedures. From the response to the survey, an in vitro nuclear medicine manual was created and appended to the study. The manual consists of lecture and study material, chapter reviews, and laboratory assignments and exercises

  17. Uranium tailings sampling manual

    International Nuclear Information System (INIS)

    Feenstra, S.; Reades, D.W.; Cherry, J.A.; Chambers, D.B.; Case, G.G.; Ibbotson, B.G.

    1985-01-01

    The purpose of this manual is to describe the requisite sampling procedures for the application of uniform high-quality standards to detailed geotechnical, hydrogeological, geochemical and air quality measurements at Canadian uranium tailings disposal sites. The selection and implementation of applicable sampling procedures for such measurements at uranium tailings disposal sites are complicated by two primary factors. Firstly, the physical and chemical nature of uranium mine tailings and effluent is considerably different from natural soil materials and natural waters. Consequently, many conventional methods for the collection and analysis of natural soils and waters are not directly applicable to tailings. Secondly, there is a wide range in the physical and chemical nature of uranium tailings. The composition of the ore, the milling process, the nature of tailings depositon, and effluent treatment vary considerably and are highly site-specific. Therefore, the definition and implementation of sampling programs for uranium tailings disposal sites require considerable evaluation, and often innovation, to ensure that appropriate sampling and analysis methods are used which provide the flexibility to take into account site-specific considerations. The following chapters describe the objective and scope of a sampling program, preliminary data collection, and the procedures for sampling of tailings solids, surface water and seepage, tailings pore-water, and wind-blown dust and radon

  18. CAL--ERDA program manual. [Building Design Language; LOADS, SYSTEMS, PLANT, ECONOMICS, REPORT, EXECUTIVE, CAL-ERDA

    Energy Technology Data Exchange (ETDEWEB)

    Hunn, B. D.; Diamond, S. C.; Bennett, G. A.; Tucker, E. F.; Roschke, M. A.

    1977-10-01

    A set of computer programs, called Cal-ERDA, is described that is capable of rapid and detailed analysis of energy consumption in buildings. A new user-oriented input language, named the Building Design Language (BDL), has been written to allow simplified manipulation of the many variables used to describe a building and its operation. This manual provides the user with information necessary to understand in detail the Cal-ERDA set of computer programs. The new computer programs described include: an EXECUTIVE Processor to create computer system control commands; a BDL Processor to analyze input instructions, execute computer system control commands, perform assignments and data retrieval, and control the operation of the LOADS, SYSTEMS, PLANT, ECONOMICS, and REPORT programs; a LOADS analysis program that calculates peak (design) zone and hourly loads and the effect of the ambient weather conditions, the internal occupancy, lighting, and equipment within the building, as well as variations in the size, location, orientation, construction, walls, roofs, floors, fenestrations, attachments (awnings, balconies), and shape of a building; a Heating, Ventilating, and Air-Conditioning (HVAC) SYSTEMS analysis program capable of modeling the operation of HVAC components including fans, coils, economizers, humidifiers, etc.; 16 standard configurations and operated according to various temperature and humidity control schedules. A plant equipment program models the operation of boilers, chillers, electrical generation equipment (diesel or turbines), heat storage apparatus (chilled or heated water), and solar heating and/or cooling systems. An ECONOMIC analysis program calculates life-cycle costs. A REPORT program produces tables of user-selected variables and arranges them according to user-specified formats. A set of WEATHER ANALYSIS programs manipulates, summarizes and plots weather data. Libraries of weather data, schedule data, and building data were prepared.

  19. Adaptation illustrations: Chapter 4

    Science.gov (United States)

    Maria Janowiak; Patricia Butler; Chris Swanston; Matt St. Pierre; Linda. Parker

    2012-01-01

    In this chapter, we demonstrate how the Adaptation Workbook (Chapter 3) can be used with the Adaptation Strategies and Approaches (Chapter 2) to develop adaptation tactics for two real-world management issues. The two illustrations in this chapter are intended to provide helpful tips to managers completing the Adaptation Workbook, as well as to show how the anticipated...

  20. Instrumentation and test gear circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Instrumentation and Test Gear Circuits Manual provides diagrams, graphs, tables, and discussions of several types of practical circuits. The practical circuits covered in this book include attenuators, bridges, scope trace doublers, timebases, and digital frequency meters. Chapter 1 discusses the basic instrumentation and test gear principles. Chapter 2 deals with the design of passive attenuators, and Chapter 3 with passive and active filter circuits. The subsequent chapters tackle 'bridge' circuits, analogue and digital metering techniques and circuitry, signal and waveform generation, and p

  1. Field manual for geohydrological sampling as applied to the radioactive waste disposal program

    International Nuclear Information System (INIS)

    Levin, M.

    1983-08-01

    This report serves as a manual for geohydrological sampling as practised by NUCOR's Geology Department. It discusses systematically all aspects concerned with sampling and stresses those where negligence has caused complications in the past. Accurate, neat and systematic procedures are emphasised. The report is intended as a reference work for the field technician. Analytical data on water samples provide an indication of the geohydrological processes taking place during the interaction between groundwater and the enclosing aquifers. It is possible to identify water bodies, using some of a multitude of parameters such as major ions, trace elements and isotopes which may give clues as to the origin, directions of flow and age of groundwater bodies. The South African Radioactive Waste Project also requires this information for determining the direction of migration of the radionuclides in the environment in the event of a spillage. The sampling procedures required for water, and in particular groundwater, must be applied in such a manner that the natural variation of dissolved species is not disturbed to any significant degree. With this in mind, the operator has to exercise meticulous care during initial preparation, collection, storing, preserving and handling of the water samples. This report is a field manual and describes the procedures adopted for the Radwaste Project geohydrological investigations in the Northwest Cape

  2. Effect of Adding Interferential Current in an Exercise and Manual Therapy Program for Patients With Unilateral Shoulder Impingement Syndrome: A Randomized Clinical Trial.

    Science.gov (United States)

    Gomes, Cid André Fidelis de Paula; Dibai-Filho, Almir Vieira; Moreira, William Arruda; Rivas, Shirley Quispe; Silva, Emanuela Dos Santos; Garrido, Ana Claudia Bogik

    The purpose of this study was to measure the additional effect of adding interferential current (IFC) to an exercise and manual therapy program for patients with unilateral shoulder impingement syndrome. Forty-five participants were randomly assigned to group 1 (exercise and manual therapy), group 2 (exercise and manual therapy + IFC), or group 3 (exercise and manual therapy + placebo ultrasound). Individuals participated in 16 treatment sessions, twice a week for 8 weeks. The primary outcome of the study was total score of the Shoulder Pain and Disability Index (SPADI). The secondary outcomes were the pain and disability subscales of SPADI, Numeric Rating Scale, and Pain-Related Self-Statement Scale. Adjusted between-group mean differences (MDs) and 95% confidence intervals (CIs) were calculated using linear mixed models. After 16 treatment sessions, statistically significant but not clinically important differences were identified in favor of the exercise and manual therapy program alone in the SPADI-total (group 1 vs group 2, MD 11.12 points, 95% CI 5.90-16.35; group 1 vs group 3, MD 13.43 points, 95% CI 8.21-18.65). Similar results were identified for secondary outcomes. The addition of IFC does not generate greater clinical effects in an exercise and manual therapy program for individuals with unilateral shoulder impingement syndrome. Copyright © 2018. Published by Elsevier Inc.

  3. In Vivo Monitoring Program Manual, PNL-MA-574, Rev 5.1

    Energy Technology Data Exchange (ETDEWEB)

    Lynch, Timothy P.

    2011-09-12

    The following sections provide an overview of the administration for the In Vivo Monitoring Program (IVMP) for Hanford. This includes the organizational structure and program responsibilities; coordination of in vivo measurements; scheduling measurements; performing measurements; reporting results; and quality assurance.

  4. 31 CFR Appendixes to Chapter V - Note

    Science.gov (United States)

    2010-07-01

    .... Freight forwarders and shippers may not charter, book cargo on, or otherwise deal with blocked vessels. 7. References to regulatory parts in chapter V or other authorities: [BALKANS]: Western Balkans Stabilization... the economic sanctions programs in chapter V. (Please call OFAC Compliance Programs Division for...

  5. Comprehensive Early Stimulation Program for Infants. Instruction Manual [and] Early Interventionist's Workbook [and] Parent/Caregiver Workbook. William Beaumont Hospital Speech and Language Pathology Series.

    Science.gov (United States)

    Santana, Altagracia A.; Bottino, Patti M.

    This early intervention kit includes a Comprehensive Early Stimulation Program for Infants (CESPI) instruction manual, an early interventionist workbook, and ten parent/caregiver workbooks. The CESPI early intervention program is designed to provide therapists, teachers, other health professionals, and parents with a common-sense, practical guide…

  6. 32 CFR 2004.20 - National Industrial Security Program Operating Manual (NISPOM) [201(a)].

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false National Industrial Security Program Operating... Defense INFORMATION SECURITY OVERSIGHT OFFICE, NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Operations § 2004.20 National Industrial Security Program...

  7. Operation and maintenance manual for diode performance analysis program DIODE0

    International Nuclear Information System (INIS)

    Boyer, W.B.

    1977-03-01

    This program computes diode performance parameters for the e beam fusion accelerators HYDRA, PROTO I and PROTO II. The program works in conjunction with other programs in the data acquisition facility library. It reads the input data produced by the Tekronix R7012 Transient Digitizers off the disc. It then computes and plots the diode corrected voltages, impedances, powers, and energies

  8. Hydride heat pump. Volume I. Users manual for HYCSOS system design program. [HYCSOS code

    Energy Technology Data Exchange (ETDEWEB)

    Gorman, R.; Moritz, P.

    1978-05-01

    A method for the design and costing of a metal hydride heat pump for residential use and a computer program, HYCSOS, which automates that method are described. The system analyzed is one in which a metal hydride heat pump can provide space heating and space cooling powered by energy from solar collectors and electric power generated from solar energy. The principles and basic design of the system are presented, and the computer program is described giving detailed design and performance equations used in the program. The operation of the program is explained, and a sample run is presented. This computer program is part of an effort to design, cost, and evaluate a hydride heat pump for residential use. The computer program is written in standard Fortran IV and was run on a CDC Cyber 74 and Cyber 174 computer. A listing of the program is included as an appendix. This report is Volume 1 of a two-volume document.

  9. Modern TTL circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Modern TTL Circuits Manual provides an introduction to the basic principles of Transistor-Transistor Logic (TTL). This book outlines the major features of the 74 series of integrated circuits (ICs) and introduces the various sub-groups of the TTL family.Organized into seven chapters, this book begins with an overview of the basics of digital ICs. This text then examines the symbology and mathematics of digital logic. Other chapters consider a variety of topics, including waveform generator circuitry, clocked flip-flop and counter circuits, special counter/dividers, registers, data latches, com

  10. CMOS circuits manual

    CERN Document Server

    Marston, R M

    1995-01-01

    CMOS Circuits Manual is a user's guide for CMOS. The book emphasizes the practical aspects of CMOS and provides circuits, tables, and graphs to further relate the fundamentals with the applications. The text first discusses the basic principles and characteristics of the CMOS devices. The succeeding chapters detail the types of CMOS IC, including simple inverter, gate and logic ICs and circuits, and complex counters and decoders. The last chapter presents a miscellaneous collection of two dozen useful CMOS circuits. The book will be useful to researchers and professionals who employ CMOS circu

  11. The Influence of an Orthopedic, Manual Therapy Residency Program on Improved Knowledge, Psychomotor Skills, and Clinical Reasoning in Nairobi, Kenya.

    Science.gov (United States)

    Cunningham, Shala; McFelea, Joni

    2017-01-01

    The purpose of this study was to describe the influence of a post-graduate orthopedic manual therapy residency program in Kenya on the development of physical therapists' (PTs) knowledge and clinical reasoning related to the performance of a musculoskeletal examination and evaluation as compared to an experience-matched control group of PTs waiting to enter the program. A cross-sectional design was utilized in which 12 graduating residents and 10 PTs entering the residency program completed a live-patient practical examination to assess the knowledge, clinical reasoning, and psychomotor skills related to the examination and evaluation of musculoskeletal conditions. The assessment utilized was based on the tasks, procedures, and knowledge areas identified as important to advanced clinicians in the US as outlined by the Orthopaedic Description of Specialty Practice. Inclusion criteria included participation in or acceptance to the residency program, practice as a PT between 3 and 25 years, and 50% of workday being involved in direct patient care. Overall pass rates were analyzed using the Pearson chi-square and Fisher's exact tests to determine if the graduating residents achieved significantly higher scores than experience-matched controls consisting of PTs entering the residency program. PTs completing a post-graduate orthopedic manual therapy residency in Nairobi, Kenya, achieved higher scores and passing rates compared to their colleagues who had not completed a residency program as determined by a live-patient practical examination. Graduating residents demonstrated statistically significant higher scores in the categories of examination, evaluation, and diagnosis. The average live-patient practical examination score for PTs without residency training was 38.2%, and their pass rate was 0.0%. The average live-patient practical examination score for residency-trained PTs was 83.4%, and their pass rate was 92.3%. These findings are statistically significant ( p

  12. PLANS; a finite element program for nonlinear analysis of structures. Volume 2: User's manual

    Science.gov (United States)

    Pifko, A.; Armen, H., Jr.; Levy, A.; Levine, H.

    1977-01-01

    The PLANS system, rather than being one comprehensive computer program, is a collection of finite element programs used for the nonlinear analysis of structures. This collection of programs evolved and is based on the organizational philosophy in which classes of analyses are treated individually based on the physical problem class to be analyzed. Each of the independent finite element computer programs of PLANS, with an associated element library, can be individually loaded and used to solve the problem class of interest. A number of programs have been developed for material nonlinear behavior alone and for combined geometric and material nonlinear behavior. The usage, capabilities, and element libraries of the current programs include: (1) plastic analysis of built-up structures where bending and membrane effects are significant, (2) three dimensional elastic-plastic analysis, (3) plastic analysis of bodies of revolution, and (4) material and geometric nonlinear analysis of built-up structures.

  13. Migrant Education, Interstate Secondary Credit Accrual and Acceptance Manual: Practical Guidelines for School Personnel Serving Migrant Secondary Students.

    Science.gov (United States)

    Villarreal, Gay Callaway

    Migrant students graduation rates, although improving, are still significantly lower than those of their non-migrant peers. This manual is a comprehensive reference guide for Chapter 1 Migrant Program personnel counselors and teachers serving migrant students at the secondary level. Migrant students are those who move across school district…

  14. Additional Effect of Static Ultrasound and Diadynamic Currents on Myofascial Trigger Points in a Manual Therapy Program for Patients With Chronic Neck Pain: A Randomized Clinical Trial.

    Science.gov (United States)

    Dibai-Filho, Almir Vieira; de Oliveira, Alessandra Kelly; Girasol, Carlos Eduardo; Dias, Fabiana Rodrigues Cancio; Guirro, Rinaldo Roberto de Jesus

    2017-04-01

    To assess the additional effect of static ultrasound and diadynamic currents on myofascial trigger points in a manual therapy program to treat individuals with chronic neck pain. A single-blind randomized trial was conducted. Both men and women, between ages 18 and 45, with chronic neck pain and active myofascial trigger points in the upper trapezius were included in the study. Subjects were assigned to 3 different groups: group 1 (n = 20) was treated with manual therapy; group 2 (n = 20) was treated with manual therapy and static ultrasound; group 3 (n = 20) was treated with manual therapy and diadynamic currents. Individuals were assessed before the first treatment session, 48 hours after the first treatment session, 48 hours after the tenth treatment session, and 4 weeks after the last session. There was no group-versus-time interaction for Numeric Rating Scale, Neck Disability Index, Pain-Related Self-Statement Scale, pressure pain threshold, cervical range of motion, and skin temperature (F-value range, 0.089-1.961; P-value range, 0.106-0.977). Moreover, we found no differences between groups regarding electromyographic activity (P > 0.05). The use of static ultrasound or diadynamic currents on myofascial trigger points in upper trapezius associated with a manual therapy program did not generate greater benefits than manual therapy alone.

  15. Users Manual for the Program LCP2 (Version 2.40)

    DEFF Research Database (Denmark)

    Gaunholt, Hans

    1996-01-01

    LCP2 (Linear Circuit Program) is developed as an analysis and optimization tool to be used in the design of passive, active and digital filters with arbitrary structures. By the aid of an optimization loop the program may be used to solve nonlinear design equations for active filter structures or...

  16. A manual to the MAXRAY program library for reflective and dispersive ray tracing

    International Nuclear Information System (INIS)

    Svensson, S.; Nyholm, R.

    1985-07-01

    A general ray tracing program package for reflective and dispersive X-ray optics is described. The package consists of a number of subroutines written in FORTRAN 77 code giving the necessary tools for ray tracing. The program package is available on request from the authors. (authors)

  17. Developing a Pupil Transportation Manual.

    Science.gov (United States)

    Douglas, Dave

    1987-01-01

    District-level pupil transportation manuals that contain clear, concise information about objectives, policies, and regulations are a must. These manuals should also specify procedures concerning evaluation processes, personnel recruitment and selection, and the driver training program. (MLH)

  18. Estimating pressurized water reactor decommissioning costs: A user's manual for the PWR Cost Estimating Computer Program (CECP) software

    International Nuclear Information System (INIS)

    Bierschbach, M.C.; Mencinsky, G.J.

    1993-10-01

    With the issuance of the Decommissioning Rule (July 27, 1988), nuclear power plant licensees are required to submit to the US Regulatory Commission (NRC) for review, decommissioning plans and cost estimates. This user's manual and the accompanying Cost Estimating Computer Program (CECP) software provide a cost-calculating methodology to the NRC staff that will assist them in assessing the adequacy of the licensee submittals. The CECP, designed to be used on a personnel computer, provides estimates for the cost of decommissioning PWR plant stations to the point of license termination. Such cost estimates include component, piping, and equipment removal costs; packaging costs; decontamination costs; transportation costs; burial costs; and manpower costs. In addition to costs, the CECP also calculates burial volumes, person-hours, crew-hours, and exposure person-hours associated with decommissioning

  19. SIMON. A computer program for reliability and statistical analysis using Monte Carlo simulation. Program description and manual

    International Nuclear Information System (INIS)

    Kongsoe, H.E.; Lauridsen, K.

    1993-09-01

    SIMON is a program for calculation of reliability and statistical analysis. The program is of the Monte Carlo type, and it is designed with high flexibility, and has a large potential for application to complex problems like reliability analyses of very large systems and of systems, where complex modelling or knowledge of special details are required. Examples of application of the program, including input and output, for reliability and statistical analysis are presented. (au) (3 tabs., 3 ills., 5 refs.)

  20. A student manual for promoting mental health among high school students

    Directory of Open Access Journals (Sweden)

    Antonella Gigantesco

    2013-03-01

    Full Text Available OBJECTIVES. We describe a school program based on a student manual for promoting mental health and preventing mental illness. METHODS. A preliminary version of the manual was assessed for face validity by two focus groups. The final version was evaluated for acceptability among 253 students in 10 high schools and 1 middle school in Italy. RESULTS. The manual included 18 chapters (or "units" which address skills for enabling students to cope with their daily lives: communication skills, problem-solving, assertive skills, negotiation, stress management, anger management and conflict resolution. The manual was found to have been acceptable by high school students. CONCLUSIONS. The effectiveness of the manual in actually promoting mental health and preventing mental illness is currently being evaluated.

  1. A student manual for promoting mental health among high school students.

    Science.gov (United States)

    Gigantesco, Antonella; Del Re, Debora; Cascavilla, Isabella

    2013-01-01

    We describe a school program based on a student manual for promoting mental health and preventing mental illness. A preliminary version of the manual was assessed for face validity by two focus groups. The final version was evaluated for acceptability among 253 students in 10 high schools and 1 middle school in Italy. The manual included 18 chapters (or "units") which address skills for enabling students to cope with their daily lives: communication skills, problem-solving, assertive skills, negotiation, stress management, anger management and conflict resolution. The manual was found to have been acceptable by high school students. The effectiveness of the manual in actually promoting mental health and preventing mental illness is currently being evaluated.

  2. Marketing and Retailing. A Curriculum Guide for a Two-Year Postsecondary Program.

    Science.gov (United States)

    Overton, R. Jean; Proffitt, Sally

    This manual was developed to provide a comprehensive curriculum guideline for postsecondary marketing and retailing programs. It contains competence-based materials and integrates the Interstate Distributive Education Curriculum Consortium (IDECC) Learning Activity Packages into the curriculum. The first of seven chapters in this manual presents…

  3. TMAP/Mod 1: Tritium Migration Analysis Program code description and user's manual

    International Nuclear Information System (INIS)

    Merrill, B.J.; Jones, J.L.; Holland, D.F.

    1986-01-01

    The Tritium Migration Analysis Program (TMAP) has been developed by the Fusion Safety Program of EG and G Idaho, Inc., at the Idaho National Engineering Laboratory (INEL) as a safety analysis code to analyze tritium loss from fusion systems during normal operation and under accident conditions. TMAP is a one-dimensional code that determines tritium movement and inventories in a system of interconnected enclosures and wall structures. In addition, the thermal response of structures is modeled to provide temperature information required for calculations of tritium movement. The program is written in FORTRAN 4 and has been implemented on the National Magnetic Fusion Energy Computing Center (NMFECC)

  4. Directives Relatives a l'Elaboration de Programmes de Conseil en Gestion pour Petites Entreprises (Guidelines for Management Consulting Programs for Small-Scale Enterprise). Appropriate Technologies for Development. Peace Corps Information Collection & Exchange Manual Series No. M-29.

    Science.gov (United States)

    Vaughan, Gary L.

    Written in French, this manual is designed to assist management consultants in working with small-scale entrepreneurs in developing countries. Addressed in an overview of the small-scale enterprise (SSE) are the role of the SSE in Third World development, problems of SSEs, and target firms. The second chapter deals with various forms of management…

  5. Pautas para Programas de Asesoramiento Gestional para Microempresas (Guidelines for Management Consulting Programs for Small-Scale Enterprise). Appropriate Technologies for Development. Peace Corps Information Collection & Exchange Manual Series No. M-27.

    Science.gov (United States)

    Vaughan, Gary L.

    Written in Spanish, this manual is designed to assist management consultants in working with small-scale entrepreneurs in developing countries. Addressed in an overview of the small-scale enterprise (SSE) are the role of the SSE in Third World development, problems of SSEs, and target firms. The second chapter deals with various forms of…

  6. Tourette Association Chapters

    Science.gov (United States)

    ... com Arizona Email: info@tsa-az.org Website: http://tsa-az.org/ Arkansas Support Group of Northwest ... California/Hawaii Chapter Email: cbrackett2004@yahoo.com Website: http://www.tsanorcal-hawaii.org Southern California Chapter Phone: ...

  7. RECON: a computer program for analyzing repository economics. Documentation and user's manual

    International Nuclear Information System (INIS)

    Clark, L.L.; Cole, B.M.; McNair, G.W.; Schutz, M.E.

    1983-05-01

    From 1981 through 1983 the Pacific Northwest Laboratory has been developing a computer model named RECON to calculate repository costs from parametric data input. The objective of the program has been to develop the capability to evalute the effect on costs of changes in repository design parameters and operating scenario assumptions. This report documents the development of the model through March of 1983. Included in the report are: (1) descriptions of model development and the underlying equations, assumptions and definitions; (2) descriptions of data input either using card images or an interactive data input program; and (3) detailed listings of the program and definitions of program variables. Cost estimates generated using the model have been verified against independent estimates and good agreement has been obtained

  8. Case report: a work simulation program for a manual worker with a fracture injury.

    Science.gov (United States)

    Chan, Chi-Chung; Chow, Jonathan H.W.

    2000-01-01

    Work rehabilitation programs targeting different client groups are available in nearly all major hospital occupational therapy departments in Hong Kong. Clients receiving work rehabilitation are referred from various out-patient clinics and other occupational therapists. Those clients experience limitation in work after their injuries or diseases and plan to return to work after rehabilitation. Program objectives are 1) to assist clients to reach maximum work capacity as rapidly as possible 2) to ensure clients return to work safely 3) to improve clients' work readiness. This case report describes an individualized work simulation program at a general hospital in Hong Kong provided for a typical client who is preparing to return to his worker role. Specific job analysis, goals and program rationale for the client are discussed.

  9. RECON: a computer program for analyzing repository economics. Documentation and user's manual. Revision 1

    International Nuclear Information System (INIS)

    Clark, L.L.; Schutz, M.E.; Luksic, A.T.

    1985-07-01

    From 1981 through 1984 the Pacific Northwest Laboratory has been developing a computer model named RECON to calculate repository costs from parametric data input. The objective of the program has been to develop the capability to evaluate the effect on costs of changes in repository design parameters and operating scenario assumptions. This report documents the development of the model through September of 1984. Included in the report are: (1) descriptions of model development and the underlying equations, assumptions and definitions; (2) descriptions of data input using either card images or an interactive data input program; and (3) detailed listings of the program and definitions of program variables. Cost estimates generated using the model have been verified against independent estimates and good agreement has been obtained. 2 refs

  10. GENLPLOT: An interactive program for display and analysis of data: User's manual

    International Nuclear Information System (INIS)

    Sullivan, J.D.; Grisar, C.C.

    1987-08-01

    GENLPLOT is an interactive program written in FORTRAN and running under VAX/VMS that enables technicians, scientists, engineers, and other users to quickly and accurately examine and analyze data. The current version utilizes the GRAPAC4 plot package, reads a standard input file or permits direct data entry, and is optimized for use with data stored in MDS databases. This program has been the principal interactive data analysis tool used on the Tara Tandem Mirror Experiment and on the Constance II Mirror Experiment. The program is menu driven with options selected on command lines distinguished by various prompts. Subsequent changes and additions to the program will be indicated by a version number greater than that appearing in the welcome message and will be documented in the appropriate menu(s)

  11. Software documentation and user's manual for fish-impingement sampling design and estimation method computer programs

    International Nuclear Information System (INIS)

    Murarka, I.P.; Bodeau, D.J.

    1977-11-01

    This report contains a description of three computer programs that implement the theory of sampling designs and the methods for estimating fish-impingement at the cooling-water intakes of nuclear power plants as described in companion report ANL/ES-60. Complete FORTRAN listings of these programs, named SAMPLE, ESTIMA, and SIZECO, are given and augmented with examples of how they are used

  12. Department of Defense (DOD) renewables and energy efficiency planning (REEP) program manual

    Energy Technology Data Exchange (ETDEWEB)

    Nemeth, R.J.; Fournier, D.; Debaillie, L.; Edgar, L.; Stroot, P.; Beasley, R.; Edgar, D.; McMillen, L.; Marren, M.

    1995-08-01

    The Renewables and Energy Efficiency Planning (REEP) program was developed at the US Army Construction Engineering Research Laboratories (USACERL). This program allows for the analysis of 78 energy and water conservation opportunities at 239 major DOD installations. REEP uses a series of algorithms in conjunction with installation specific data to estimate the energy and water conservation potential for entire installations. The program provides the energy, financial, pollution, and social benefits of conservation initiatives. The open architecture of the program allows for simple modification of energy and water conservation variables, and installation database values to allow for individualized analysis. The program is essentially a high-level screening tool that can be used to help identify and focus preliminary conservation studies. The REEP program requires an IBM PC or compatible with a 80386 or 80486 microprocessor. It also requires approximately 4 megabytes of disk space and at least 8 megabytes of RAM. The system was developed for a Windows environment and requires Microsoft Windows 3.1{trademark} or higher to run properly.

  13. Technical Manual. The ACT®

    Science.gov (United States)

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  14. Marketing Research. Instructor's Manual.

    Science.gov (United States)

    Small Business Administration, Washington, DC.

    Prepared for the Administrative Management Course Program, this instructor's manual was developed to serve small-business management needs. The sections of the manual are as follows: (1) Lesson Plan--an outline of material covered, which may be used as a teaching guide, presented in two columns: the presentation, and a step-by-step indication of…

  15. Chapter 10: Management recommendations

    Science.gov (United States)

    Deborah M. Finch; Janie Agyagos; Tracy McCarthey; Robert M. Marshall; Scott H. Stoleson; Mary J. Whitfield

    2000-01-01

    This chapter was developed over a series of meetings using a group-consensus process. Our recommendations are based on published results, on information compiled in the previous chapters, on expert opinion, and on unpublished data of conservation team members. This chapter is available as temporary guidance until the Recovery Plan for the southwestern willow flycatcher...

  16. Pdap Manual

    DEFF Research Database (Denmark)

    Pedersen, Mads Mølgaard; Larsen, Torben J.

    Pdap, Python Data Analysis Program, is a program for post processing, analysis, visualization and presentation of data e.g. simulation results and measurements. It is intended but not limited to the domain of wind turbines. It combines an intuitive graphical user interface with python scripting...... that allows automation and implementation of custom functions. This manual gives a short introduction to the graphical user interface, describes the mathematical background for some of the functions, describes the scripting API and finally a few examples on how automate analysis via scripting is presented....... The newest version, and more documentation and help on how to used, extend and automate Pdap can be found at the webpage www.hawc2.dk...

  17. Manual for Cyclic Triaxial Test

    DEFF Research Database (Denmark)

    Shajarati, Amir; Sørensen, Kris Wessel; Nielsen, Søren Kjær

    This manual describes the different steps that is included in the procedure for conducting a cyclic triaxial test at the geotechnical Laboratory at Aalborg University. Furthermore it contains a chapter concerning some of the background theory for the static triaxial tests. The cyclic/dynamic tria......This manual describes the different steps that is included in the procedure for conducting a cyclic triaxial test at the geotechnical Laboratory at Aalborg University. Furthermore it contains a chapter concerning some of the background theory for the static triaxial tests. The cyclic...

  18. National Synchrotron Light Source Facility Manual Maintenance Management Program. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Fewell, N.

    1993-12-01

    The purpose of this program s to meet the policy and objectives for the management and performance of cost-effective maintenance and repair of the National Synchrotron Light Source, as required by the US Department of Energy order DOE 433O.4A. It is the DOE`s policy that: The maintenance management program for the NSLS be consistent with this Order and that NSLS property is maintained in a manner which promotes operational safety, worker health, environmental protection and compliance, property preservation, and cost-effectiveness while meeting the NSLS`s programmatic mission. Structures, components and systems (active and passive) that are imporant to safe operation of the NSLS shall be subject to a maintenance program to ensure that they meet or exceed their design requirements throughout the life of the NSLS. Periodic examination of structures, systems components and equipment be performed to determine deterioration or technical obsolescence which may threaten performance and/or safety. Primary responsibility, authority, and accountability for the direction and management of the maintenance program at the NSLS reside with the line management assigned direct programmatic responsibility. Budgeting and accounting for maintenance programs are consistent with DOE Orders guidance.

  19. Energy statistics manual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The Manual is written in a question-and-answer format. The points developed are introduced with a basic question, such as: What do people mean by 'fuels' and 'energy'? What units are used to express oil? How are energy data presented? Answers are given in simple terms and illustrated by graphs, charts and tables. More technical explanations are found in the annexes. The Manual contains seven chapters. The first one presents the fundamentals of energy statistics, five chapters deal with the five different fuels (electricity and heat; natural gas; oil; solid fuels and manufactured gases; renewables and waste) and the last chapter explains the energy balance. Three technical annexes and a glossary are also included. For the five chapters dedicated to the fuels, there are three levels of reading: the first one contains general information on the subject, the second one reviews issues which are specific to the joint IEA/OECD-Eurostat-UNECE questionnaires and the third one focuses on the essential elements of the subject. 43 figs., 22 tabs., 3 annexes.

  20. FURNACE 2. Toroidal geometry neutronic program system method. Description and users manual

    Energy Technology Data Exchange (ETDEWEB)

    Verschuur, K.A.

    1995-10-01

    FURNACE2 is a 3-dimensional neutron/photon-transport program system for toroidal geometries. It uses ray-tracing and double-differential reflection-and transmission-coefficients and flux-kernels to calculate the angular-flux spectra inside the torus of a fusion-reactor. FURNACE2 is an extended version of FURNACE, developed for application to the neutron-diagnostics at JET, which was supported financially by JET. It is used at JET to calculate the foil-activation for the KN2 diagnostics, the angular-fluxes on the lines of sight of the KN3 profile monitors, and general background fluxes and activation of the vessel. The program is used along with MCNP, combining the advantages of each of the programs and for mutual checks. (orig.).

  1. FURNACE 2. Toroidal geometry neutronic program system method. Description and users manual

    International Nuclear Information System (INIS)

    Verschuur, K.A.

    1995-10-01

    FURNACE2 is a 3-dimensional neutron/photon-transport program system for toroidal geometries. It uses ray-tracing and double-differential reflection-and transmission-coefficients and flux-kernels to calculate the angular-flux spectra inside the torus of a fusion-reactor. FURNACE2 is an extended version of FURNACE, developed for application to the neutron-diagnostics at JET, which was supported financially by JET. It is used at JET to calculate the foil-activation for the KN2 diagnostics, the angular-fluxes on the lines of sight of the KN3 profile monitors, and general background fluxes and activation of the vessel. The program is used along with MCNP, combining the advantages of each of the programs and for mutual checks. (orig.)

  2. User's manual for QUERY: a computer program for retrieval of environmental data

    Energy Technology Data Exchange (ETDEWEB)

    Nyholm, R.A.

    1979-03-06

    QUERY is a computer program used for the retrieval of environmental data. The code was developed in support of the Imperial Valley Environmental Project of the Environmental Sciences division at Lawrence Livermore Laboratory to handle a multitude of environmentally related information. The program can run in either an interactive mode or production mode to retrieve these data. In either case, the user specifies a set of search constraints and then proceeds to select an output format from a menu of output options or to specify the output format according to his immediate needs. Basic data statistics can be requested. Merging of disparate data bases and subfile extraction are elementary.

  3. A manual-based vocational rehabilitation program for patients with an acquired brain injury

    DEFF Research Database (Denmark)

    Høffding, Louise.K.Enggaard; Nielsen, Maria Haahr; Rasmussen, Morten Arendt

    2017-01-01

    as a work placement program including supported employment. Furthermore, the intervention will include a family intervention program followed up by support to one individual family caregiver. The primary outcomes are increased work or study rate at six-month follow-up. Moreover, a budget impact analysis...... and possibly a cost-utility analysis of the intervention will be performed. DISCUSSION: This study consists of a comprehensive multidiciplinary VR intervention involving several parties such as the municipalities, a specialized rehabilitation team, and patients' own family caregivers. If this intervention...

  4. Program Cost Accounting Manual. Form J-380/Form J-580, 1989-90.

    Science.gov (United States)

    California State Dept. of Education, Sacramento. Office of Financial Management Practices and Standards.

    In response to criticism by legislators, the business community, and other publics for an apparent lack of sound financial management, the California State Department of Education, together with representatives from the field and from state control agencies, began to develop a new program cost accounting system in 1984. After pilot testing, the…

  5. 1979-80 Budget Process. Phase I: Educational Programs. Procedures Manual.

    Science.gov (United States)

    Los Angeles Community Coll. District, CA. Div. of Educational Planning and Development.

    As Proposition 13 necessitated more drastic curtailment of expenditures than had been anticipated when the modified zero-based operational plan for 1978-79 was devised, the budget development procedure was revised for 1979-80. The process is divided into three phases: educational programs, district fiscal plan, and the operational plan. This…

  6. Users manual. Pursuit program of use licenses of radioactive material or generator equipment of ionizing radiations

    International Nuclear Information System (INIS)

    Becerril M, V.M.; Villarreal, J.E.

    1992-05-01

    The objective of the program 'Databases for the pursuit of licenses of use of radioactive material', it consists on the application of a computer system carried out in dbase IV that it allows the control of the all the information related with those licenses for use, possession and storage of radioactive material or generator equipment of ionizing radiations. (Author)

  7. Manual for subject analysis

    International Nuclear Information System (INIS)

    2002-01-01

    This document is one in a series of publications known as the ETDE/INIS Joint Reference Series and also constitutes a part of the ETDE Procedures Manual. It presents the rules, guidelines and procedures to be adopted by centers submitting input to the International Nuclear Information System (INIS) or the Energy Technology Data Exchange (ETDE). It is a manual for the subject analysis part of input preparation, meaning the selection, subject classification, abstracting and subject indexing of relevant publications, and is to be used in conjunction with the Thesauruses, Subject Categories documents and the documents providing guidelines for the preparation of abstracts. The concept and structure of the new manual are intended to describe in a logical and efficient sequence all the steps comprising the subject analysis of documents to be reported to INIS or ETDE. The manual includes new chapters on preparatory analysis, subject classification, abstracting and subject indexing, as well as rules, guidelines, procedures, examples and a special chapter on guidelines and examples for subject analysis in particular subject fields. (g.t.; a.n.)

  8. The Chapter 1 Challenge: Colorado's Contribution 1993.

    Science.gov (United States)

    Petro, Janice Rose; And Others

    An overview is provided of Colorado's participation in Chapter 1, the largest federally funded program designed to provide services to elementary and secondary students. Chapter 1 provides financial assistance to state and local education agencies to meet the special needs of educationally deprived children who reside in areas with high…

  9. Audit-Proof Contracting for Federal Money for Children's Services: Financing Services for Children through Title XX and Other Programs. Manual 3.

    Science.gov (United States)

    Copeland, William C.

    This is the third of a 3-part series on how to locate, obtain, and manage Federal money for children's services. This manual concentrates on the contracting of money for specific programs. Emphasis is on Title XX of the Social Security Act, but attention is given also to alternative sources where Title XX funds are not sufficient. Although useful…

  10. The Hondo 15 program for calculation of molecule electronic structure: its adaptation to Cyber 170/750 system of IEAv and use manual

    International Nuclear Information System (INIS)

    Rosato, A.; Pinheiro, A.M.B.S.; Ornellas, F.R.; Roberto Neto, O.

    1985-01-01

    The HONDO/5 program, herein described, performs a Hartree-Fock-Roothaan type calculation in molecules employing Gaussian type functions in the expansion of the molecular orbitals. After a brief exposition of the method upon which the theory is based, a new manual is presented in a more detailed version than the original one. (Author) [pt

  11. Rotorcraft Flight Simulation Computer Program C81 with Datamap Interface, Volume 2. Programmer’s Manual

    Science.gov (United States)

    1981-10-01

    overview of the computer program capabilities and the principal mathematical models incorporated in the program are given in Volume I of the documentation...blank card must still be placed in the appropriate place in the Model Data Set. For example, the mathematical model of a UH-lH would not need a wing...SIN %4114 LV OADs CC £6 $ 2. 27 4L 4+ 4 l’l <m L & % CC O 04i18K5 twsSTVEL 13L4.S2 ASK 2? b 41.815 . 8 ’ILbLS a CL 7 8 £0 1 £0 £0 12 £6 1 M90 A/ MUfI H

  12. Automated design and optimization of flexible booster autopilots via linear programming. Volume 2: User's manual

    Science.gov (United States)

    Hauser, F. D.; Szollosi, G. D.; Lakin, W. S.

    1972-01-01

    COEBRA, the Computerized Optimization of Elastic Booster Autopilots, is an autopilot design program. The bulk of the design criteria is presented in the form of minimum allowed gain/phase stability margins. COEBRA has two optimization phases: (1) a phase to maximize stability margins; and (2) a phase to optimize structural bending moment load relief capability in the presence of minimum requirements on gain/phase stability margins.

  13. Hanford whole body counting manual

    International Nuclear Information System (INIS)

    Palmer, H.E.; Rieksts, G.A.; Lynch, T.P.

    1990-06-01

    This document describes the Hanford Whole Body Counting Program as it is administered by Pacific Northwest Laboratory (PNL) in support of the US Department of Energy--Richland Operations Office (DOE-RL) and its Hanford contractors. Program services include providing in vivo measurements of internally deposited radioactivity in Hanford employees (or visitors). Specific chapters of this manual deal with the following subjects: program operational charter, authority, administration, and practices, including interpreting applicable DOE Orders, regulations, and guidance into criteria for in vivo measurement frequency, etc., for the plant-wide whole body counting services; state-of-the-art facilities and equipment used to provide the best in vivo measurement results possible for the approximately 11,000 measurements made annually; procedures for performing the various in vivo measurements at the Whole Body Counter (WBC) and related facilities including whole body counts; operation and maintenance of counting equipment, quality assurance provisions of the program, WBC data processing functions, statistical aspects of in vivo measurements, and whole body counting records and associated guidance documents. 16 refs., 48 figs., 22 tabs

  14. A statistical manual for chemists

    CERN Document Server

    Bauer, Edward

    1971-01-01

    A Statistical Manual for Chemists, Second Edition presents simple and fast statistical tools for data analysis of working chemists. This edition is organized into nine chapters and begins with an overview of the fundamental principles of the statistical techniques used in experimental data analysis. The subsequent chapters deal with the concept of statistical average, experimental design, and analysis of variance. The discussion then shifts to control charts, with particular emphasis on variable charts that are more useful to chemists and chemical engineers. A chapter focuses on the effect

  15. ACT Plan: Technical Manual. 2013/2014

    Science.gov (United States)

    ACT, Inc., 2013

    2013-01-01

    This manual contains information about the American College Test (ACT) Plan® program. The principal focus of this manual is to document the Plan program's technical adequacy in light of its intended purposes. This manual supersedes the 2011 edition. The content of this manual responds to requirements of the testing industry as established in the…

  16. Energy statistics: A manual for developing countries

    International Nuclear Information System (INIS)

    1991-01-01

    Considerable advances have been made by developing countries during the last 20 years in the collection and compilation of energy statistics. the present Manual is a guide, which it is hoped will be used in countries whose system of statistics is less advanced to identify the main areas that should be developed and how this might be achieved. The generally accepted aim is for countries to be able to compile statistics annually on the main characteristics shown for each fuel, and for energy in total. These characteristics are mainly concerned with production, supply and consumption, but others relating to the size and capabilities of the different energy industries may also be of considerable importance. The initial task of collecting data from the energy industries (mines, oil producers, refineries and distributors, electrical power stations, etc.) may well fall to a number of organizations. ''Energy'' from a statistical point of view is the sum of the component fuels, and good energy statistics are therefore dependent on good fuel statistics. For this reason a considerable part of this Manual is devoted to the production of regular, comprehensive and reliable statistics relating to individual fuels. Chapters V to IX of this Manual are concerned with identifying the flows of energy, from production to final consumption, for each individual fuel, and how data on these flows might be expected to be obtained. The very different problems concerned with the collection of data on the flows for biomass fuels are covered in chapter X. The data needed to complete the picture of the national scene for each individual fuel, more concerned with describing the size, capabilities and efficiency of the industries related to that fuel, are discussed in chapter XI. Annex I sets out the relationships between the classifications of the various types of fuels. The compilation of energy balances from the data obtained for individual fuels is covered in chapter XIII. Finally, chapter

  17. Aircraft noise prediction program theoretical manual: Rotorcraft System Noise Prediction System (ROTONET), part 4

    Science.gov (United States)

    Weir, Donald S.; Jumper, Stephen J.; Burley, Casey L.; Golub, Robert A.

    1995-01-01

    This document describes the theoretical methods used in the rotorcraft noise prediction system (ROTONET), which is a part of the NASA Aircraft Noise Prediction Program (ANOPP). The ANOPP code consists of an executive, database manager, and prediction modules for jet engine, propeller, and rotor noise. The ROTONET subsystem contains modules for the prediction of rotor airloads and performance with momentum theory and prescribed wake aerodynamics, rotor tone noise with compact chordwise and full-surface solutions to the Ffowcs-Williams-Hawkings equations, semiempirical airfoil broadband noise, and turbulence ingestion broadband noise. Flight dynamics, atmosphere propagation, and noise metric calculations are covered in NASA TM-83199, Parts 1, 2, and 3.

  18. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Quality Assurance Manual

    Energy Technology Data Exchange (ETDEWEB)

    C. L. Smith; R. Nims; K. J. Kvarfordt; C. Wharton

    2008-08-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment using a personal computer running the Microsoft Windows operating system. SAPHIRE is primarily funded by the U.S. Nuclear Regulatory Commission (NRC). The role of the INL in this project is that of software developer and tester. This development takes place using formal software development procedures and is subject to quality assurance (QA) processes. The purpose of this document is to describe how the SAPHIRE software QA is performed for Version 6 and 7, what constitutes its parts, and limitations of those processes.

  19. SCAP - a Shaped Charge Analysis Program: user's manual for SCAP 1. 0

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, A.C.

    1985-04-01

    The basic modeling and format for a shaped charge analysis program, SCAP, is described. The code models the motion of liner elements due to explosive loading, jet formation, jet breakup and target penetration through application of a series of analytical approximations. The structure of the code is intended to provide flexibility in shaped charge device and target configurations and in modeling techniques. The code is designed for interactive use and produces both printed and plotted output. Examples of code output are given and compared with experimental data. 19 refs., 13 figs.

  20. SUBCALC 2.0 -- Substation magnetic field modeling program: User's manual

    International Nuclear Information System (INIS)

    Pappa, J.R.; Silva, J.M.; Kasten, D.; Sebo, S.; Ohio State Univ., Columbus, OH

    1995-11-01

    SUBCALC, a Microsoft reg-sign Windows trademark application, allows users to map magnetic fields in or around electric utility substations from common types of substation equipment. SUBCALC allows users to create a substation using predefined transmission and distribution lines and other substation components and to quickly modify them to match the desired operating conditions. Users have the option of invoking Power Line Calculator, a program that integrates with SUBCALC, to define power line conditions such as currents, phase angles, power factor, or symmetric components for three-phase lines that are unbalanced or carry net current. SUBCALC 2.0 offers numerous modeling, user interface, and editing enhancements. For example, users can now produce multi-segmented linear profile plots, take spot measurements anywhere in the model, extend lines with automatic connectivity to preexisting structures, and produce phantom extensions of lines beyond the model to avoid a ''stunted'' appearance to the field map. The program's output is available in four possible formats, including a three-dimensional map of the magnetic field, two-dimensional contours, two-dimensional profile plots, and a table with statistical values. All formats may be printed, accompanied by a three-dimensional view of the world the user has drawn

  1. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Code Reference Manual

    Energy Technology Data Exchange (ETDEWEB)

    C. L. Smith; K. J. Kvarfordt; S. T. Wood

    2008-08-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer. SAPHIRE is funded by the U.S. Nuclear Regulatory Commission (NRC) and developed by the Idaho National Laboratory (INL). The INL's primary role in this project is that of software developer. However, the INL also plays an important role in technology transfer by interfacing and supporting SAPHIRE users comprised of a wide range of PRA practitioners from the NRC, national laboratories, the private sector, and foreign countries. SAPHIRE can be used to model a complex system’s response to initiating events, quantify associated damage outcome frequencies, and identify important contributors to this damage (Level 1 PRA) and to analyze containment performance during a severe accident and quantify radioactive releases (Level 2 PRA). It can be used for a PRA evaluating a variety of operating conditions, for example, for a nuclear reactor at full power, low power, or at shutdown conditions. Furthermore, SAPHIRE can be used to analyze both internal and external initiating events and has special features for transforming models built for internal event analysis to models for external event analysis. It can also be used in a limited manner to quantify risk in terms of release consequences to both the public and the environment (Level 3 PRA). SAPHIRE includes a separate module called the Graphical Evaluation Module (GEM). GEM provides a highly specialized user interface with SAPHIRE that automates SAPHIRE process steps for evaluating operational events at commercial nuclear power plants. Using GEM, an analyst can estimate the risk associated with operational events in a very efficient and expeditious manner. This reference guide will introduce the SAPHIRE Version 7.0 software. A brief discussion of the purpose and history of the software is included along with

  2. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Code Reference Manual

    Energy Technology Data Exchange (ETDEWEB)

    C. L. Smith; K. J. Kvarfordt; S. T. Wood

    2006-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer. SAPHIRE is funded by the U.S. Nuclear Regulatory Commission (NRC) and developed by the Idaho National Laboratory (INL). The INL's primary role in this project is that of software developer. However, the INL also plays an important role in technology transfer by interfacing and supporting SAPHIRE users comprised of a wide range of PRA practitioners from the NRC, national laboratories, the private sector, and foreign countries. SAPHIRE can be used to model a complex system’s response to initiating events, quantify associated damage outcome frequencies, and identify important contributors to this damage (Level 1 PRA) and to analyze containment performance during a severe accident and quantify radioactive releases (Level 2 PRA). It can be used for a PRA evaluating a variety of operating conditions, for example, for a nuclear reactor at full power, low power, or at shutdown conditions. Furthermore, SAPHIRE can be used to analyze both internal and external initiating events and has special features for ansforming models built for internal event analysis to models for external event analysis. It can also be used in a limited manner to quantify risk in terms of release consequences to both the public and the environment (Level 3 PRA). SAPHIRE includes a separate module called the Graphical Evaluation Module (GEM). GEM provides a highly specialized user interface with SAPHIRE that automates SAPHIRE process steps for evaluating operational events at commercial nuclear power plants. Using GEM, an analyst can estimate the risk associated with operational events in a very efficient and expeditious manner. This reference guide will introduce the SAPHIRE Version 7.0 software. A brief discussion of the purpose and history of the software is included along with

  3. Quality assurance manual for the Department of Energy laboratory accreditation program for personnel dosimetry systems

    International Nuclear Information System (INIS)

    1987-02-01

    The overall purpose of this document is to establish a uniform approach to quality assurance. This will ensure that uniform, high-quality personnel dosimetry practices are followed by the participating testing laboratories. The document presents guidelines for calibrating and maintaining measurement and test equipment (M and TE), calibrating radiation fields, and subsequently irradiating and handling personnel dosimeters in laboratories involved in the DOE dosimetry systems testing program. Radiation energies for which the test procedures apply are photons with approximately 15 keV to 2 MeV, beta particles above 0.3 MeV, neutrons with approximately 1 keV to 2 MeV. 12 refs., 4 tabs

  4. Description and user manual of the WIMSLIC, FIXER and COMPA programs

    International Nuclear Information System (INIS)

    Aguilar H, F.

    1992-08-01

    In this work the WIMS library and those WIMSLIC, FIXER and COMPA codes that are used to give him maintenance or to create a new one, the way to use them and its scopes are described. The objective of WIMSLIC, is the one of generating data nuclear with the WIMS code format, uses those results obtained with the NJOY system and the one POWR module, the FIXER function is to generate a new WIMS library or to already modify an existent, using the results of the one WIMSLIC code or those obtained with NJOY and WIMSR, while the COMPA function is to compare data groups with WIMS format. In the Appendix 1 the files of data are had that would use to generate a new library of WIMS that contain nuclear data for U-235, U-238, H-1, 0-16 and Al-27. In the Appendix 2 one has the listing of the programs before mentioned. (Author)

  5. Default Management Manual.

    Science.gov (United States)

    Dent, Richard A.

    This manual is designed to instruct administrators of the Guaranteed Student Loan (GSL) Program in how to take every step possible to administer the program effectively and to minimize the program costs of serving the high risk student. It shows schools how to work with students throughout their time in school, create ownership of the loan(s) by…

  6. Chapter 27. Superconductors

    International Nuclear Information System (INIS)

    Vavra, O.

    2007-01-01

    In this chapter author deals with superconductors and superconductivity. Different chemical materials used as high-temperature superconductors are presented. Some applications of superconductivity are presented.

  7. INTERLINE 5.0 -- An expanded railroad routing model: Program description, methodology, and revised user's manual

    International Nuclear Information System (INIS)

    Johnson, P.E.; Joy, D.S.; Clarke, D.B.; Jacobi, J.M.

    1993-03-01

    A rail routine model, INTERLINE, has been developed at the Oak Ridge National Laboratory to investigate potential routes for transporting radioactive materials. In Version 5.0, the INTERLINE routing algorithms have been enhanced to include the ability to predict alternative routes, barge routes, and population statistics for any route. The INTERLINE railroad network is essentially a computerized rail atlas describing the US railroad system. All rail lines, with the exception of industrial spurs, are included in the network. Inland waterways and deep water routes along with their interchange points with the US railroadsystem are also included. The network contains over 15,000 rail and barge segments (links) and over 13,000 stations, interchange points, ports, and other locations (nodes). The INTERLINE model has been converted to operate on an IBM-compatible personal computer. At least a 286 computer with a hard disk containing approximately 6 MB of free space is recommended. Enhanced program performance will be obtained by using arandom-access memory drive on a 386 or 486 computer

  8. SAFSIM theory manual: A computer program for the engineering simulation of flow systems

    Energy Technology Data Exchange (ETDEWEB)

    Dobranich, D.

    1993-12-01

    SAFSIM (System Analysis Flow SIMulator) is a FORTRAN computer program for simulating the integrated performance of complex flow systems. SAFSIM provides sufficient versatility to allow the engineering simulation of almost any system, from a backyard sprinkler system to a clustered nuclear reactor propulsion system. In addition to versatility, speed and robustness are primary SAFSIM development goals. SAFSIM contains three basic physics modules: (1) a fluid mechanics module with flow network capability; (2) a structure heat transfer module with multiple convection and radiation exchange surface capability; and (3) a point reactor dynamics module with reactivity feedback and decay heat capability. Any or all of the physics modules can be implemented, as the problem dictates. SAFSIM can be used for compressible and incompressible, single-phase, multicomponent flow systems. Both the fluid mechanics and structure heat transfer modules employ a one-dimensional finite element modeling approach. This document contains a description of the theory incorporated in SAFSIM, including the governing equations, the numerical methods, and the overall system solution strategies.

  9. Kentucky Disability Resource Manual: A Handbook of Program Descriptions, Eligibility Criteria, and Contact Information. Updated December 2013

    Science.gov (United States)

    Human Development Institute, 2013

    2013-01-01

    This updated manual was designed primarily for use by individuals with developmental disabilities and related conditions. It is hoped that it is also useful for families, as well as service coordinators and providers who directly assist families and individuals with developmental disabilities. The main focus of this manual is to provide…

  10. Obtaining Federal Money for Children's Services: Financing Services for Children through Title XX and Other Programs. Manual 2.

    Science.gov (United States)

    Copeland, William C.

    This is the second manual of a 4-part series on how to find, obtain, contract for and manage Federal money for children's services. This manual discusses how to put together a services concept, how to organize to obtain federal money and how to relate to the state's or county's planning, budgeting and appropriations cycle. Emphasis is on Title XX…

  11. BEACON/MOD2A: a computer program for subcompartment analysis of nuclear reactor containment. A user's manual

    International Nuclear Information System (INIS)

    Wells, R.A.

    1979-03-01

    The BEACON code is a Best Estimate Advanced Containment code which being developed by EG and G, Idaho, Inc., at the Idaho National Engineering Laboratory. The program is designed to perform a best estimate analysis of the flow of a mixture of air, water, and steam in a nuclear reactor containment system under loss-of-coolant accident conditions. The code can simulate two-component, two-phase fluid flow in complex geometries using a combination of two-dimensional, one-dimensional, and lumped-parameter representations for the various parts of the system. The current version of BEACON, which is designated BEACON/MOD2A, contains mass and heat transfer models for wall film and for wall conduction. It is suitable for the evaluation of short term transients in PWR dry containment systems. This manual describes the models employed in BEACON/MOD2A and specifies code implementation requirements. It provides application information for input data preparation and for output data interpretation

  12. La Apaicultura de Pequena Escala (Small Scale Beekeeping). Appropriate Technologies for Development. Peace Corps Information Collection & Exchange Manual Series No. M-25.

    Science.gov (United States)

    Gentry, Curtis

    This Spanish-language manual is designed to assist Peace Corps volunteers in Spanish-speaking countries in the implementation of small-scale beekeeping programs as a tool for development. Addressed in the individual chapters are bees and humans; project planning; the types and habits of bees; the essence of beekeeping; bee space and beehives;…

  13. Repository Integration Program: RIP performance assessment and strategy evaluation model theory manual and user's guide

    International Nuclear Information System (INIS)

    1995-11-01

    This report describes the theory and capabilities of RIP (Repository Integration Program). RIP is a powerful and flexible computational tool for carrying out probabilistic integrated total system performance assessments for geologic repositories. The primary purpose of RIP is to provide a management tool for guiding system design and site characterization. In addition, the performance assessment model (and the process of eliciting model input) can act as a mechanism for integrating the large amount of available information into a meaningful whole (in a sense, allowing one to keep the ''big picture'' and the ultimate aims of the project clearly in focus). Such an integration is useful both for project managers and project scientists. RIP is based on a '' top down'' approach to performance assessment that concentrates on the integration of the entire system, and utilizes relatively high-level descriptive models and parameters. The key point in the application of such a ''top down'' approach is that the simplified models and associated high-level parameters must incorporate an accurate representation of their uncertainty. RIP is designed in a very flexible manner such that details can be readily added to various components of the model without modifying the computer code. Uncertainty is also handled in a very flexible manner, and both parameter and model (process) uncertainty can be explicitly considered. Uncertainty is propagated through the integrated PA model using an enhanced Monte Carlo method. RIP must rely heavily on subjective assessment (expert opinion) for much of its input. The process of eliciting the high-level input parameters required for RIP is critical to its successful application. As a result, in order for any project to successfully apply a tool such as RIP, an enormous amount of communication and cooperation must exist between the data collectors, the process modelers, and the performance. assessment modelers

  14. Stimulation model for lenticular sands: Volume 2, Users manual

    Energy Technology Data Exchange (ETDEWEB)

    Rybicki, E.F.; Luiskutty, C.T.; Sutrick, J.S.; Palmer, I.D.; Shah, G.H.; Tomutsa, L.

    1987-07-01

    This User's Manual contains information for four fracture/proppant models. TUPROP1 contains a Geertsma and de Klerk type fracture model. The section of the program utilizing the proppant fracture geometry data from the pseudo three-dimensional highly elongated fracture model is called TUPROPC. The analogous proppant section of the program that was modified to accept fracture shape data from SA3DFRAC is called TUPROPS. TUPROPS also includes fracture closure. Finally there is the penny fracture and its proppant model, PENNPROP. In the first three chapters, the proppant sections are based on the same theory for determining the proppant distribution but have modifications to support variable height fractures and modifications to accept fracture geometry from three different fracture models. Thus, information about each proppant model in the User's Manual builds on information supplied in the previous chapter. The exception to the development of combined treatment models is the penny fracture and its proppant model. In this case, a completely new proppant model was developed. A description of how to use the combined treatment model for the penny fracture is contained in Chapter 4. 2 refs.

  15. Thick-joint welding process. Chapter 5

    International Nuclear Information System (INIS)

    Wood, D.; Terry, P.; Dickinson, F.S.

    1980-01-01

    This chapter reviews the techniques currently employed in the welding of pressure vessels, ranging from traditional manual metal arc and submerged arc processes to the more recently introduced narrow-gap and high-energy processes, e.g. electron beam and laser. The effect on the properties of the base materials being joined and the relative economics of the various processes is examined, from which guidance on the balance between joint properties and economy can be gained. (author)

  16. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2009-08-28

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document.

  17. Master schedule for CY-1980 Hanford Environmental Surveillance Routine Program

    International Nuclear Information System (INIS)

    Blumer, P.J.; Houston, J.R.; Eddy, P.A.

    1979-12-01

    The current schedule of data collection for the routine environmental surveillance program at the Hanford Site is presented. The enviromental surveillance program objectives are to evaluate the levels of radioactive and nonradioactive pollutants in the Hanford environs, as required in Manual Chapter 0513, and to monitor Hanford operations for compliance with applicable environmental criteria given in Manual Chapter 0524 and Washington State Water Quality Standards. Data are reported on the following topics: air; Columbia River; sanitary water; surface water; ground water; foodstuffs; wildlife; soil and vegetation; external radiation measurement; portable instrument surveys; and surveillance of waste disposal sites;

  18. SCALPLO - a universal program for plotting flux output from SCALE modules and related programs. User`s manual

    Energy Technology Data Exchange (ETDEWEB)

    Hersman, A; Leege, P F.A. de; Hoogenboom, J E

    1992-04-01

    The FORTRAN-77 program SCALPLO is being developed to make an easy and quick graphic survey of flux and/or power data calculated with SCALE modules or other core calculation or shielding codes. The basic plot functions it can perform are one- and two-dimensional plots of flux or power distributions and flux energy spectra. More specifically it can produce plots of the flux distribution in a one-dimensional geometry for one or more energy groups in one figure. It can also plot the flux distribution along a cut through a two- or three-dimensional geometry along one of the coordinate axes and it can plot a two-dimensional view of the flux distribution of a two-dimensional geometry or of a plane cut through a three-dimensional geometry. The same can be done for the power distribution in a system. Furthermore SCALPLO can plot the particle flux spectrum as a function of energy, either as group fluxes or as group fluxes per unit energy or per unit lethargy. (orig./HP).

  19. Environmental Radioactivity. Chapter 4

    International Nuclear Information System (INIS)

    Muhamat Omar; Ismail Sulaiman; Zalina Laili

    2015-01-01

    This chapter explains several things which consist radioactivity measurements, regular and high background radioactivity, radioactive contaminated soil and radioactivity in fertilizers, rocks, building materials, food, water, environments, sediments, flora and fauna. Besides, the natural radioactive gas concentration of radon and toron in the environment also been discussed specifically in this chapter.

  20. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2010-01-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the

  1. Silicate glasses. Chapter 1

    International Nuclear Information System (INIS)

    Lutze, W.

    1988-01-01

    This chapter is a survey of world-wide research and development efforts in nuclear waste glasses and its production technology. The principal glasses considered are silicate glasses which contain boron, i.e. borosilicate glass. A historical overview of waste form development programs in nine countries is followed by a summary of the design criteria for borosilicate glass compositions glass compositions. In the sections on glass properties the waste form is characterized in terms of potential alterations under the influence of heat, thermal gradients, radiation, aqueous solutions and combinations thereof. The topics are phase transformations, mechanical properties, radiation effects and chemical durability. The results from studies of volcanic glasses, as natural analogues for borosilicate nuclear waste glasses in order to verify predictions obtained from short-term tests in the laboratory, have been compiled in a special section on natural analogues. A special section on advanced vitrification techniques summarizes the various actual and potential processing schemes and describes the facilities. The literature has been considered until 1985. (author). 430 refs.; 68 figs.; 29 tabs

  2. Salinas : theory manual.

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2004-08-01

    This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas , we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programer-notes manual, the user's notes and of course the material in the open literature.

  3. A users manual for a computer program which calculates time optical geocentric transfers using solar or nuclear electric and high thrust propulsion

    Science.gov (United States)

    Sackett, L. L.; Edelbaum, T. N.; Malchow, H. L.

    1974-01-01

    This manual is a guide for using a computer program which calculates time optimal trajectories for high-and low-thrust geocentric transfers. Either SEP or NEP may be assumed and a one or two impulse, fixed total delta V, initial high thrust phase may be included. Also a single impulse of specified delta V may be included after the low thrust state. The low thrust phase utilizes equinoctial orbital elements to avoid the classical singularities and Kryloff-Boguliuboff averaging to help insure more rapid computation time. The program is written in FORTRAN 4 in double precision for use on an IBM 360 computer. The manual includes a description of the problem treated, input/output information, examples of runs, and source code listings.

  4. U.S. Department of Energy Vehicle Technologies Program: Battery Test Manual For Plug-In Hybrid Electric Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Christophersen, Jon P. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office. It is based on technical targets for commercial viability established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the procedures and supporting analysis, future revisions including some modifications and clarifications of these procedures are expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices. The DOE-United States Advanced Battery Consortium (USABC), Technical Advisory Committee (TAC) supported the development of the manual. Technical Team points of contact responsible for its development and revision are Renata M. Arsenault of Ford Motor Company and Jon P. Christophersen of the Idaho National Laboratory. The development of this manual was funded by the Unites States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Technical direction from DOE was provided by David Howell, Energy Storage R&D Manager and Hybrid Electric Systems Team Leader. Comments and questions regarding the manual should be directed to Jon P. Christophersen at the Idaho National Laboratory (jon.christophersen@inl.gov).

  5. Manual Therapy

    OpenAIRE

    Hakgüder, Aral; Kokino, Siranuş

    2002-01-01

    Manual therapy has been used in the treatment of pain and dysfunction of spinal and peripheral joints for more than a hundred years. Manual medicine includes manipulation, mobilization, and postisometric relaxation techniques. The aim of manual therapy is to enhance restricted movement caused by blockage of joints keeping postural balance, restore function and maintain optimal body mechanics. Anatomic, biomechanical, and neurophysiological evaluations of the leucomotor system is essential for...

  6. INIS: Database manual

    International Nuclear Information System (INIS)

    2003-01-01

    This document is one in a series of publications known as the INIS Reference Series. It is intended for users of INIS (International Nuclear Information System) output data on various media (FTP file, CD-ROM, e-mail file, earlier magnetic tape, cartridge, etc.). This manual provides a description of each data element including information on contents, structure and usage as well as historical overview of additions, deletions and changes of data elements and their contents that have taken place over the years. Each record contains certain control data fields (001-009), one, two or three bibliographic levels, a set of descriptors, and zero, one or more abstracts, one in English and optionally one or more in another language. In order to facilitate the description of the system, the sequence of data elements is based on the input or, as it is internally called, worksheet format which differs from the exchange format described in the manual IAEA-INIS-7. A separate section is devoted to each data element and deviations from the exchange format are indicated whenever present. As the Record Leader and the Directory are sufficiently explained in Chapter 3.1 of IAEA-INIS-7, the contents of this manual are limited to control fields and data fields; the detailed explanations are intended to supplement the basic information given in Chapter 3.2 of IAEA-INIS-7. Bibliographic levels are used to identify component parts of a publication, i.e. chapters in a book, articles in a journal issue, conference papers in a proceedings volume. All bibliographic levels contained in a record are given in a control data field. Each bibliographic level identifier appears in the subdirectory with a pointer to its position in the record

  7. Radioanalytical methods manual

    International Nuclear Information System (INIS)

    Chiu, N.W.; Dean, J.R.

    1986-01-01

    This Radioanalytical Methods manual is comprised of 12 chapters. It includes a review of the pertinent literature up to the end of 1982 pertaining to the measurement of the radioactive species listed under the terms of the contract. Included is methodology recommended for the decompositions of soils, tailings, ores, biological samples and air filters. Detailed analytical methodology for the measurement of gross alpha, gross beta, gross gamma, uranium, radium-226, radium-228, lead-210, thorium-232, thorium-230, thorium-228, total thorium, radon-222, radon-220 and radon-219 is presented

  8. Health and safety manual

    International Nuclear Information System (INIS)

    1980-02-01

    The manual consists of the following chapters: general policies and administration; the Environmental Health and Safety Department; the Medical Services Department: biological hazards; chemical safety; confined space entry; cryogenic safety; electrical safety; emergency plans; engineering and construction; evacuations, trenching, and shoring; fire safety; gases, flammable and compressed; guarding, mechanical; ladders and scaffolds, work surfaces; laser safety; materials handling and storage; noise; personal protective equipment; pressure safety; radiation safety, ionizing and non-ionizing; sanitation; seismic safety; training, environmental health and safety; tools, power and hand-operated; traffic and transportation; and warning signs and devices

  9. Southern Ductile Training Manual.

    Science.gov (United States)

    Alabama State Dept. of Education, Montgomery.

    This instructor's manual contains the materials required to conduct the competency-based workplace literacy program that was developed to help employees at a foundry that has evolved from a small, family-owned business into a major foundry group with several automated production systems. The workplace literacy program consists of 24 lessons in…

  10. Programming in HAL/S

    Science.gov (United States)

    Ryer, M. J.

    1979-01-01

    Intended as an introduction to programming in HAL/S, this manual is organized as a tutorial aid which may be used as part of a self-study program or in conjunction with a course of twenty to forty classroom hours over a period of one to two weeks. A number of corrections to the first edition are incorporated into the text along with a chapter on FIXED data and an additional appendix on FORMAT I/0.

  11. Chapter 9: Electronics

    International Nuclear Information System (INIS)

    Grupen, Claus; Shwartz, Boris A.

    2006-01-01

    Sophisticated front-end electronics are a key part of practically all modern radiation detector systems. This chapter introduces the basic principles and their implementation. Topics include signal acquisition, electronic noise, pulse shaping (analog and digital), and data readout techniques

  12. Basic Principles - Chapter 6

    Data.gov (United States)

    National Aeronautics and Space Administration — This chapter described at a very high level some of the considerations that need to be made when designing algorithms for a vehicle health management application....

  13. Structures manual

    Science.gov (United States)

    2001-01-01

    This manual was written as a guide for use by design personnel in the Vermont Agency of Transportation Structures Section. This manual covers the design responsibilities of the Section. It does not cover other functions that are a part of the Structu...

  14. Aircraft operations management manual

    Science.gov (United States)

    1992-01-01

    The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.

  15. Description and user manual of the WIMSLIC, FIXER and COMPA programs; Descripcion y manual del usuario de los programas WIMSLIC, FIXER y COMPA

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar H, F [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    1992-08-15

    In this work the WIMS library and those WIMSLIC, FIXER and COMPA codes that are used to give him maintenance or to create a new one, the way to use them and its scopes are described. The objective of WIMSLIC, is the one of generating data nuclear with the WIMS code format, uses those results obtained with the NJOY system and the one POWR module, the FIXER function is to generate a new WIMS library or to already modify an existent, using the results of the one WIMSLIC code or those obtained with NJOY and WIMSR, while the COMPA function is to compare data groups with WIMS format. In the Appendix 1 the files of data are had that would use to generate a new library of WIMS that contain nuclear data for U-235, U-238, H-1, 0-16 and Al-27. In the Appendix 2 one has the listing of the programs before mentioned. (Author)

  16. The status of temporomandibular and cervical spine education in credentialed orthopedic manual physical therapy fellowship programs: a comparison of didactic and clinical education exposure.

    Science.gov (United States)

    Shaffer, Stephen M; Brismée, Jean-Michel; Courtney, Carol A; Sizer, Phillip S

    2015-02-01

    The purpose of this investigation was to establish a baseline of physical therapist education on temporomandibular disorders (TMD)-related topics during credentialed orthopedic manual physical therapy fellowship training and compare it to cervical spine disorders education. An online survey was distributed electronically to each fellowship program credentialed by the American Physical Therapy Association (APTA) and recognized by the Academy of Orthopedic Manual Physical Therapists (AAOMPT). Data were analyzed to compare overall exposure to TMD educational content, including a direct comparison of TMD and cervical spine disorders education. The response rate was 79%. Thirteen programs (87%) reported providing both didactic and clinical training on both TMD and cervical spine disorders. Didactic education for cervical spine disorders ranged from 16-20 hours to over 25 hours, whereas TMD hours ranged from 0 to 6-10 hours. Clinical education for cervical spine disorders ranged from 11-15 hours to over 25 hours, whereas TMD hours ranged from 0 to 6-10 hours. The number of hours of exposure during didactic training and the number of patients exposed to during clinical training were significantly different when comparing TMD to cervical spine disorders exposure (P<0.0001). The data indicate a lack of uniformity between credentialed fellowship programs in orthopedic manual physical therapy with respect to the extent to which programs expose trainees to evaluation and management of TMD. There is consistency in that all programs provided more training on cervical spine disorders than TMD. Despite a high level of clinical specialization, fellows-in-training receive minimal TMD education.

  17. FINAS. Example manual. 2

    International Nuclear Information System (INIS)

    Iwata, Koji; Tsukimori, Kazuyuki; Ueno, Mutsuo

    2003-12-01

    FINAS is a general purpose structural analysis computer program which was developed by Japan Nuclear Cycle Development Institute for the analysis of static, dynamic and thermal responses of elastic and inelastic structures by the finite element method. This manual contains typical analysis examples that illustrate applications of FINAS to a variety of structural engineering problems. The first part of this manual presents fundamental examples in which numerical solutions by FINAS are compared with some analytical reference solutions, and the second part of this manual presents more complex examples intended for practical application. All the input data images and principal results for each problem are included in this manual for beginners' convenience. All the analyses are performed by using the FINAS Version 13.0. (author)

  18. MANUAL LOGIC CONTROLLER (MLC)

    OpenAIRE

    Claude Ziad Bayeh

    2015-01-01

    The “Manual Logic Controller” also called MLC, is an electronic circuit invented and designed by the author in 2008, in order to replace the well known PLC (Programmable Logic Controller) in many applications for its advantages and its low cost of fabrication. The function of the MLC is somewhat similar to the well known PLC, but instead of doing it by inserting a written program into the PLC using a computer or specific software inside the PLC, it will be manually programmed in a manner to h...

  19. Operating manual for the Tower Shielding Facility

    International Nuclear Information System (INIS)

    1985-12-01

    This manual provides information necessary to operate and perform maintenance on the reactor systems and all equipment or systems which can affect their operation or the safety of personnel at the Tower Shielding Facility. The first four chapters consist of introductory and descriptive material of benefit to personnel in training, the qualifications required for training, the responsibilities of the personnel in the organization, and the procedures for reviewing proposed experiments. Chapter 8, Emergency Procedures, is also a necessary part of the indoctrination of personnel. The procedures for operation of the Tower Shielding Reactor (TSR-II), its water cooling system, and the main tower hoists are outlined in Chapters 5, 6, and 7. The Technical Specification surveillance requirements for the TSR-II are summarized in Chapter 9. The maintenance and calibration schedule is spelled out in Chapter 10. The procedures for assembly and disassembly of the TSR-II are outlined in Chapter 11

  20. Users Manual for the FEHMN application

    International Nuclear Information System (INIS)

    Zyvoloski, G.A.; Robinson, B.A.; Dash, Z.V.; Trease, L.L.

    1996-01-01

    The user's manual documents the use of the Yucca Mountain Site Characterization Projects Finite element heat and mass transfer code (FEHMN) application. The manual covers: Program considerations, data files, input data, output, system interface, and examples

  1. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2010-04-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision

  2. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2011-04-04

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision

  3. Satisfaction and perceptions of long-term manual wheelchair users with a spinal cord injury upon completion of a locomotor training program with an overground robotic exoskeleton.

    Science.gov (United States)

    Gagnon, Dany H; Vermette, Martin; Duclos, Cyril; Aubertin-Leheudre, Mylène; Ahmed, Sara; Kairy, Dahlia

    2017-12-19

    The main objectives of this study were to quantify clients' satisfaction and perception upon completion of a locomotor training program with an overground robotic exoskeleton. A group of 14 wheelchair users with a spinal cord injury, who finished a 6-8-week locomotor training program with the robotic exoskeleton (18 training sessions), were invited to complete a web-based electronic questionnaire. This questionnaire encompassed 41 statements organized around seven key domains: overall satisfaction related to the training program, satisfaction related to the overground robotic exoskeleton, satisfaction related to the program attributes, perceived learnability, perceived health benefits and risks and perceived motivation to engage in physical activity. Each statement was rated using a visual analogue scale ranging from "0 = totally disagree" to "100 = completely agree". Overall, respondents unanimously considered themselves satisfied with the locomotor training program with the robotic exoskeleton (95.7 ± 0.7%) and provided positive feedback about the robotic exoskeleton itself (82.3 ± 6.9%), the attributes of the locomotor training program (84.5 ± 6.9%) and their ability to learn to perform sit-stand transfers and walk with the robotic exoskeleton (79.6 ± 17%). Respondents perceived some health benefits (67.9 ± 16.7%) and have reported no fear of developing secondary complications or of potential risk for themselves linked to the use of the robotic exoskeleton (16.7 ± 8.2%). At the end of the program, respondents felt motivated to engage in a regular physical activity program (91.3 ± 0.1%). This study provides new insights on satisfaction and perceptions of wheelchair users while also confirming the relevance to continue to improve such technologies, and informing the development of future clinical trials. Implications for Rehabilitation All long-term manual wheelchair users with a spinal cord injury who participated in the

  4. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    International Nuclear Information System (INIS)

    Rathbone, Bruce A.

    2007-01-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL's Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL's Electronic Records and Information Capture Architecture (ERICA) database. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Revision Log: Rev. 0 (2/25/2005) Major revision and expansion. Rev. 0.1 (3/12/2007) Minor

  5. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2007-03-12

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Revision Log: Rev. 0 (2/25/2005) Major revision and expansion. Rev. 0.1 (3/12/2007) Minor

  6. Conclusion. Chapter 4

    International Nuclear Information System (INIS)

    1999-01-01

    Beginning 1992, January 1 Semipalatinsk test site was transforming into large research scientific center. The National Nuclear Center (NNC) was formed on the base of site's research enterprises. The principal problems of NNC are as follows: liquidation of nuclear tests consequences; liquidation of technological infrastructure for preparation and conducting of nuclear tests, creation of technology for radioactive wastes store; implementation of atomic energy development conception in Kazakhstan, etc. Program of site conversion constantly is expanding. In this chapter measures by rehabilitation of injured population are revealed. Taking into account radioecological situation, dose loadings, demographic indexes, sick rate and mortality of population on territories exposed to site's influence Government of Kazakhstan adopted Decree on declaration of these lands of zone of ecological catastrophe. Measures on improvement of radioecological situation are reduce to following ones: determination of irradiation doses received by population during testing period; study of existing radiation contamination; study of all possible sources for dose increasing and taking into account other ones; information of population about radioecological situation and about all consequences of nuclear tests. In 1992 Supreme Soviet of Republic of Kazakhstan worked out and adopted law On social defence of citizens suffered from consequences of nuclear tests on Semipalatinsk test site. It was distinguished four zones of radiation risk. The first zone is zone of extreme risk. It is part of territory subjected to radiation contamination with dose of influence on population above 100 rem during of total period of tests conducting. To this zone belong following inhabited settlements: Budene, Dolon', Cheremushki, Mostik, Sarzhal, Isa, Sarpan, Karakoryk, Zagotskot-2. Second zone is zone of maximal radiation risk. To this zone belong inhabited settlements of following districts: Abaj, Abraly, Beskargaj

  7. Energy management manual

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    The Pueblo of Laguna lies in the Grants Uranium Belt. The Grants belt is the source of more than half of all uranium produced in the US. Currently the Pueblo has development agreements with Conoco and Anaconda. Only the Anaconda leasehold has been developed - an open pit mine and 2 underground mines. The Pueblo has several areas of concern in managing mineral development. These include monitoring and enforcing performance standards, and taxing severance of uranium from the land. Constraints on tribal regulation of energy development are discussed in Chapter 1. Energy management program needs of the Pueblo of Laguna are discussed in Chapter 2. Chapter three contains the energy management plan to be used by the Pueblo as it formulates and implements an energy development and management strategy. (DMC)

  8. Building a capacity building manual

    CSIR Research Space (South Africa)

    Clinton, DD

    2010-02-01

    Full Text Available Organizations 2010 Building a capacity building manual Daniel D. Clinton, Jr., P.E., F.NSPE Chair, WFEO Capacity Building Committee Dr Andrew Cleland, FIPENZ, Chief Executive, IPENZ, NZ Eng David Botha, FSAICE, Executive Director, SAICE, SA Dawit... 2010 Tertiary level University curricula Coaches and mentors Facilities EXCeeD Remuneration of Academics Experiential training Outreach to Students Students chapters Young members forum World Federation of Engineering Organizations 2010 Post...

  9. [Effects of educational program of manual lymph massage on the arm functioning and the quality of life in breast cancer patients].

    Science.gov (United States)

    Lee, Eun Sook; Kim, Sung Hyo; Kim, Sun Mi; Sun, Jeong Ju

    2005-12-01

    The purpose of this study was to determine the effect of EPMLM (educational program of manual lymph massage) on the arm functioning and QOL (quality of life) in breast cancer patients with lymphedema. Subjects in the experimental group (n=20) participated in EPMLM for 6 weeks from June to July, 2005. The EPMLM consisted of training of lymph massage for 2 weeks and encourage and support of self-care using lymph massage for 4 weeks. The arm functioning assessed at pre-treatment, 2 weeks, and 6 weeks using Arm functioning questionnaire. The QOL assessed at pre-treatment and 6 weeks using SF-36. The outcome data of experimental group was compared with control group (n=20). The collected data was analyzed by using SPSS 10.0 statistical program. The arm functioning of experimental group was increased from 2 weeks after (W=.224, p=.011) and statistically differenced with control group at 2 weeks (Z=-2.241, p=.024) and 6 weeks (Z=-2.453, p=.013). Physical function of QOL domain increased in experimental group (Z=-1.162, p=.050), also statistically differenced with control group (Z=-2.182, p= .030) at 6 weeks. The results suggest that the educational program of manual lymph massage can improve arm functioning and physical function of QOL domain in breast cancer patients with lymphedema.

  10. Nursery management [Chapter 16

    Science.gov (United States)

    Kim M. Wilkinson

    2009-01-01

    This handbook provides an overview of the factors that go into starting and operating a native plant nursery. Management includes all aspects of working with plants in all their phases of growth as described in Chapter 3, Crop Planning and Developing Propagation Protocols. Management also includes working with the community; organizing materials and infrastructure;...

  11. Chapter 8. Data Analysis

    Science.gov (United States)

    Lyman L. McDonald; Christina D. Vojta; Kevin S. McKelvey

    2013-01-01

    Perhaps the greatest barrier between monitoring and management is data analysis. Data languish in drawers and spreadsheets because those who collect or maintain monitoring data lack training in how to effectively summarize and analyze their findings. This chapter serves as a first step to surmounting that barrier by empowering any monitoring team with the basic...

  12. Forestry [Chapter 11

    Science.gov (United States)

    H. Gyde Lund; William A. Befort; James E. Brickell; William M. Ciesla; Elizabeth C. Collins; Raymond L. Czaplewski; Attilio Antonio Disperati; Robert W. Douglass; Charles W. Dull; Jerry D. Greer; Rachel Riemann Hershey; Vernon J. LaBau; Henry Lachowski; Peter A. Murtha; David J. Nowak; Marc A. Roberts; Pierre Schram; Mahadev D. Shedha; Ashbindu Singh; Kenneth C. Winterberger

    1997-01-01

    Foresters and other resource managers have used aerial photographs to help manage resources since the late 1920s. As discussed in chapter 1, however, it was not until the mid-1940s that their use became common. Obtaining photographic coverage was always a problem. For many areas of the world, reasonably complete coverage did not exist until after World War II. In...

  13. Radiation biology. Chapter 20

    Energy Technology Data Exchange (ETDEWEB)

    Wondergem, J. [International Atomic Energy Agency, Vienna (Austria)

    2014-09-15

    Radiation biology (radiobiology) is the study of the action of ionizing radiations on living matter. This chapter gives an overview of the biological effects of ionizing radiation and discusses the physical, chemical and biological variables that affect dose response at the cellular, tissue and whole body levels at doses and dose rates relevant to diagnostic radiology.

  14. Water resources (Chapter 12)

    Science.gov (United States)

    Thomas C. Brown; Romano Foti; Jorge Ramirez

    2012-01-01

    In this chapter, we focus on the vulnerability of U.S. freshwater supplies considering all lands, not just forest and rangelands. We do not assess the condition of those lands or report on how much of our water supply originates on lands of different land covers or ownerships, because earlier Resources Planning Act (RPA) Assessment work addressed these topics....

  15. Chapter 5: Training

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2018-04-01

    The chapter 5 presents the 1) initial training; 2) periodic training, which includes: a) periodic training for employees at lower levels of the hierarchy than that of the operator; b) period training for operators; 3) operator training; 4) record of training; 5) safety culture.

  16. Chapter 0: Executive summary

    International Nuclear Information System (INIS)

    1995-01-01

    This chapter deals with the background (Gabcikovo hydro power scheme was input in October 1992), project objective, project framework, equipment, establishment of the integrated modelling system, model setup, calibration and validation, definitions of scenarios for model application and with the results of model applications

  17. Chapter 6: Accidents

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2018-04-01

    Th chapter 6 presents the accidents of: 1) Stimos (Italy - May, 1975); 2) San Salvador (El Salvador - February 5, 1989); 3) Soreq (Israel - June 21, 1990); 4) Nesvizh (Belarus - October 26, 1991); 5) Illinois (USA - February, 1965); 6)Maryland (EUA - December 11, 1991); 7)Hanoi (Vietnam -November 17, 1992); 8)Fleurus (Belgium - March 11, 2006) and final remarks on accidents.

  18. Pilot program: NRC severe reactor accident incident response training manual: Public protective actions: Predetermined criteria and initial actions

    International Nuclear Information System (INIS)

    Martin, J.A. Jr.; McKenna, T.J.; Miller, C.W.; Hively, L.M.; Sharpe, R.W.; Giitter, J.G.; Watkins, R.M.

    1987-02-01

    This pilot training manual has been written to fill the need for a general text on NRC response to reactor accidents. The manual is intended to be the foundation for a course for all NRC response personnel. Public Protective Actions - Predetermined Criteria and Initial Actions is the fourth in a series of volumes that collectively summarize the US Nuclear Regulatory Commission (NRC) emergency response during severe power reactor accidents and provide necessary background information. This volume reviews public protective action criteria and objectives, their bases and implementation, and the expected public response. Each volume serves, respectively, as the text for a course of instruction in a series of courses for NRC response personnel. These materials do not provide guidance or license requirements for NRC licensees. Each volume is accompanied by an appendix of slides that can be used to present this material. The slides are called out in the text

  19. OASIS User Manual

    CERN Document Server

    Bojtar, L

    2009-01-01

    The OASIS system has been operational for years now. After a long development the project has reached a state where the number of features it provides exceeds largely what most of its users knows about. The author felt it was time to write a user manual explaining all the functionality of the viewer application. This document is a user manual, concentrating on the functionality of the viewer from the user’s point of view. There are already documents available on the project’s web site about the technical aspects at http://project-oasis.web.cern.ch/project-oasis/presentations.htm . There was an attempt to produce a tutorial on the viewer, but it didn’t get much further than the table of contents, that however is well thought. The structure of this user manual follows the same principle, the basic and most often used features are grouped together. Advanced or less often used features are described in a separate chapter. There is a second organizational principle, features belong to different levels: chann...

  20. Site security personnel training manual

    International Nuclear Information System (INIS)

    1978-10-01

    As required by 10 CFR Part 73, this training manual provides guidance to assist licensees in the development of security personnel training and qualifications programs. The information contained in the manual typifies the level and scope of training for personnel assigned to perform security related tasks and job duties associated with the protection of nuclear fuel cycle facilities and nuclear power reactors

  1. Dental Chairside Technique. Student's Manual.

    Science.gov (United States)

    Apfel, Maura; Weaver, Trudy Karlene

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: local anesthesia; dental office emergencies; oral hygiene;…

  2. Managerial Accounting. Course Administrative Manual.

    Science.gov (United States)

    Central Michigan Univ., Mount Pleasant. Inst. for Personal and Career Development.

    This manual is part of the materials for a college-level programmed course in managerial accounting and intended to aid instructors in helping students to work their way through the self-instructional study guide around which the course is organized. The manual describes the various materials and components used in the self-instructional sequence…

  3. CANAL user's manual

    International Nuclear Information System (INIS)

    Faya, A.; Wolf, L.; Todreas, N.

    1979-11-01

    CANAL is a subchannel computer program for the steady-state and transient thermal hydraulic analysis of BWR fuel rod bundles. The purpose of this manual is to introduce the user into the mechanism of running the code by providing information about the input data and options

  4. Water Quality Monitoring Manual.

    Science.gov (United States)

    Mason, Fred J.; Houdart, Joseph F.

    This manual is designed for students involved in environmental education programs dealing with water pollution problems. By establishing a network of Environmental Monitoring Stations within the educational system, four steps toward the prevention, control, and abatement of water pollution are proposed. (1) Train students to recognize, monitor,…

  5. Transmission pipeline calculations and simulations manual

    CERN Document Server

    Menon, E Shashi

    2014-01-01

    Transmission Pipeline Calculations and Simulations Manual is a valuable time- and money-saving tool to quickly pinpoint the essential formulae, equations, and calculations needed for transmission pipeline routing and construction decisions. The manual's three-part treatment starts with gas and petroleum data tables, followed by self-contained chapters concerning applications. Case studies at the end of each chapter provide practical experience for problem solving. Topics in this book include pressure and temperature profile of natural gas pipelines, how to size pipelines for specified f

  6. CASKS (Computer Analysis of Storage casKS): A microcomputer based analysis system for storage cask design review. User's manual to Version 1b (including program reference)

    International Nuclear Information System (INIS)

    Chen, T.F.; Gerhard, M.A.; Trummer, D.J.; Johnson, G.L.; Mok, G.C.

    1995-02-01

    CASKS (Computer Analysis of Storage casKS) is a microcomputer-based system of computer programs and databases developed at the Lawrence Livermore National Laboratory (LLNL) for evaluating safety analysis reports on spent-fuel storage casks. The bulk of the complete program and this user's manual are based upon the SCANS (Shipping Cask ANalysis System) program previously developed at LLNL. A number of enhancements and improvements were added to the original SCANS program to meet requirements unique to storage casks. CASKS is an easy-to-use system that calculates global response of storage casks to impact loads, pressure loads and thermal conditions. This provides reviewers with a tool for an independent check on analyses submitted by licensees. CASKS is based on microcomputers compatible with the IBM-PC family of computers. The system is composed of a series of menus, input programs, cask analysis programs, and output display programs. All data is entered through fill-in-the-blank input screens that contain descriptive data requests

  7. Incorporating travel time reliability into the Highway Capacity Manual.

    Science.gov (United States)

    2014-01-01

    This final report documents the activities performed during SHRP 2 Reliability Project L08: Incorporating Travel Time Reliability into the Highway Capacity Manual. It serves as a supplement to the proposed chapters for incorporating travel time relia...

  8. DCAA Contract Audit Manual. Volume 1, Chapters 1 - 11

    Science.gov (United States)

    1995-01-01

    al costs are not charged to indirect ex- tourism . These arrangements ma be pense pools and allocated to domestic solely between the contractor and the...financially capable of completing the contract. [Notice the negative assurance relative to financial capability.] 2. Smm y of Audit Ret a. In our

  9. The effectiveness of combining inspiratory muscle training with manual therapy and a therapeutic exercise program on maximum inspiratory pressure in adults with asthma: a randomized clinical trial.

    Science.gov (United States)

    López-de-Uralde-Villanueva, Ibai; Candelas-Fernández, Pablo; de-Diego-Cano, Beatriz; Mínguez-Calzada, Orcález; Del Corral, Tamara

    2018-06-01

    The objective of this study was to evaluate whether the addition of manual therapy and therapeutic exercise protocol to inspiratory muscle training was more effective in improving maximum inspiratory pressure than inspiratory muscle training in isolation. This is a single-blinded, randomized controlled trial. In total, 43 patients with asthma were included in this study. The patients were allocated into one of the two groups: (1) inspiratory muscle training ( n = 21; 20-minute session) or (2) inspiratory muscle training (20-minute session) combined with a program of manual therapy (15-minute session) and therapeutic exercise (15-minute session; n = 22). All participants received 12 sessions, two days/week, for six weeks and performed the domiciliary exercises protocol. The main measures such as maximum inspiratory pressure, spirometric measures, forward head posture, and thoracic kyphosis were recorded at baseline and after the treatment. For the per-protocol analysis, between-group differences at post-intervention were observed in maximum inspiratory pressure (19.77 cmH 2 O (11.49-28.04), P < .05; F = 22.436; P < .001; η 2 p  = 0.371) and forward head posture (-1.25 cm (-2.32 to -0.19), P < .05; F = 5.662; P = .022; η 2 p  = 0.13). The intention-to-treat analysis showed the same pattern of findings. The inspiratory muscle training combined with a manual therapy and therapeutic exercise program is more effective than its application in isolation for producing short-term maximum inspiratory pressure and forward head posture improvements in patients with asthma.

  10. Netbooks The Missing Manual

    CERN Document Server

    Biersdorfer, J

    2009-01-01

    Netbooks are the hot new thing in PCs -- small, inexpensive laptops designed for web browsing, email, and working with web-based programs. But chances are you don't know how to choose a netbook, let alone use one. Not to worry: with this Missing Manual, you'll learn which netbook is right for you and how to set it up and use it for everything from spreadsheets for work to hobbies like gaming and photo sharing. Netbooks: The Missing Manual provides easy-to-follow instructions and lots of advice to help you: Learn the basics for using a Windows- or Linux-based netbookConnect speakers, printe

  11. GRACE manual

    International Nuclear Information System (INIS)

    Ishikawa, T.; Kawabata, S.; Shimizu, Y.; Kaneko, T.; Kato, K.; Tanaka, H.

    1993-02-01

    This manual is composed of three kinds of objects, theoretical background for calculating the cross section of elementary process, usage and technical details of the GRACE system. Throughout this manual we take the tree level process e + e - → W + W - γ as an example, including the e ± -scalar boson interactions. The real FORTRAN source code for this process is attached in the relevant sections as well as the results of calculation, which might be a great help for understanding the practical use of the system. (J.P.N.)

  12. Radiation Protection. Chapter 24

    Energy Technology Data Exchange (ETDEWEB)

    Sutton, D. [Ninewells Hospital, Dundee (United Kingdom); Collins, L. T. [Westmead Hospital, Sydney (Australia); Le Heron, J. [International Atomic Energy Agency, Vienna (Austria)

    2014-09-15

    Chapter 21, in describing basic radiation biology and radiation effects, demonstrates the need to have a system of radiation protection that allows the many beneficial uses of radiation to be realized while ensuring detrimental radiation effects are either prevented or minimized. This can be achieved with the twin objectives of preventing the occurrence of deterministic effects and of limiting the probability of stochastic effects to a level that is considered acceptable. In a radiology facility, consideration needs to be given to the patient, the staff involved in performing the radiological procedures, members of the public and other staff that may be in the radiology facility, carers and comforters of patients undergoing procedures, and persons who may be undergoing a radiological procedure as part of a biomedical research project. This chapter discusses how the objectives given above are fulfilled through a system of radiation protection and how such a system should be applied practically in a radiology facility.

  13. Calculations of Financial Incentives for Providers in a Pay-for-Performance Program: Manual Review Versus Data From Structured Fields in Electronic Health Records.

    Science.gov (United States)

    Urech, Tracy H; Woodard, LeChauncy D; Virani, Salim S; Dudley, R Adams; Lutschg, Meghan Z; Petersen, Laura A

    2015-10-01

    Hospital report cards and financial incentives linked to performance require clinical data that are reliable, appropriate, timely, and cost-effective to process. Pay-for-performance plans are transitioning to automated electronic health record (EHR) data as an efficient method to generate data needed for these programs. To determine how well data from automated processing of structured fields in the electronic health record (AP-EHR) reflect data from manual chart review and the impact of these data on performance rewards. Cross-sectional analysis of performance measures used in a cluster randomized trial assessing the impact of financial incentives on guideline-recommended care for hypertension. A total of 2840 patients with hypertension assigned to participating physicians at 12 Veterans Affairs hospital-based outpatient clinics. Fifty-two physicians and 33 primary care personnel received incentive payments. Overall, positive and negative agreement indices and Cohen's kappa were calculated for assessments of guideline-recommended antihypertensive medication use, blood pressure (BP) control, and appropriate response to uncontrolled BP. Pearson's correlation coefficient was used to assess how similar participants' calculated earnings were between the data sources. By manual chart review data, 72.3% of patients were considered to have received guideline-recommended antihypertensive medications compared with 65.0% by AP-EHR review (κ=0.51). Manual review indicated 69.5% of patients had controlled BP compared with 66.8% by AP-EHR review (κ=0.87). Compared with 52.2% of patients per the manual review, 39.8% received an appropriate response by AP-EHR review (κ=0.28). Participants' incentive payments calculated using the 2 methods were highly correlated (r≥0.98). Using the AP-EHR data to calculate earnings, participants' payment changes ranged from a decrease of $91.00 (-30.3%) to an increase of $18.20 (+7.4%) for medication use (interquartile range, -14.4% to 0

  14. Probe code: a set of programs for processing and analysis of the left ventricular function - User's manual

    International Nuclear Information System (INIS)

    Piva, R.M.V.

    1987-01-01

    The User's Manual of the Probe Code is an addendum to the M.Sc. thesis entitled A Microcomputer System of Nuclear Probe to Check the Left Ventricular Function. The Probe Code is a software which was developed for processing and off-line analysis curves from the Left Ventricular Function, that were obtained in vivo. These curves are produced by means of an external scintigraph probe, which was collimated and put on the left ventricule, after a venous inoculation of Tc-99 m. (author)

  15. Chapter 5: Monitoring results

    DEFF Research Database (Denmark)

    Poel, Bart; Thomsen, Kirsten Engelund; Schultz, Jørgen Munthe

    2003-01-01

    The monitoring results from the IEA Task 13 project "Advanced solar low energy houses" are described in this chapter. The underlying information was collected in the form of questionnaires. The questionnaires were formulated in such a way that participants are provided with a uniform lay......-out to fill in their particular results. Thus it is possible to compare the performances measured, calculated or predicted for the different houses....

  16. Chapter 14. Greenhouses

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin D.

    1998-01-01

    Greenhouse heating is one of the most common uses of geothermal resources. Because of the significant heating requirements of greenhouses and their ability to use very low- temperature fluids, they are a natural application. The evaluation of a particular greenhouse project involves consideration of the structure heating requirements, and the system to meet those requirements. This chapter is intended to provide information on each of these areas.

  17. Water resources (Chapter 5)

    CSIR Research Space (South Africa)

    Hobbs, Philip

    2016-01-01

    Full Text Available and relationships that inform the association between geology, shale gas and groundwater that is discussed in this Chapter. The mudstones and sandstones of the Adelaide Subgroup at the base of the Beaufort Group succession of sedimentary strata represent... migration to surface. The sedimentary rocks of the Ecca Group cover a further ~6% of the study area. In agreement with Rosewarne et al. (2013), who recognise a western, a central and an eastern subarea; this study recognises an additional southern subarea...

  18. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE), Version 5.0. Volume 5, Systems Analysis and Risk Assessment (SARA) tutorial manual

    International Nuclear Information System (INIS)

    Sattison, M.B.; Russell, K.D.; Skinner, N.L.

    1994-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs) primarily for nuclear power plants. This volume is the tutorial manual for the Systems Analysis and Risk Assessment (SARA) System Version 5.0, a microcomputer-based system used to analyze the safety issues of a open-quotes familyclose quotes [i.e., a power plant, a manufacturing facility, any facility on which a probabilistic risk assessment (PRA) might be performed]. A series of lessons is provided that guides the user through some basic steps common to most analyses performed with SARA. The example problems presented in the lessons build on one another, and in combination, lead the user through all aspects of SARA sensitivity analysis capabilities

  19. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE), Version 5.0: Models and Results Database (MAR-D) reference manual. Volume 8

    International Nuclear Information System (INIS)

    Russell, K.D.; Skinner, N.L.

    1994-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs), primarily for nuclear power plants. The primary function of MAR-D is to create a data repository for completed PRAs and Individual Plant Examinations (IPEs) by providing input, conversion, and output capabilities for data used by IRRAS, SARA, SETS, and FRANTIC software. As probabilistic risk assessments and individual plant examinations are submitted to the NRC for review, MAR-D can be used to convert the models and results from the study for use with IRRAS and SARA. Then, these data can be easily accessed by future studies and will be in a form that will enhance the analysis process. This reference manual provides an overview of the functions available within MAR-D and step-by-step operating instructions

  20. The National Water-Quality Assessment Program Invertebrate Data Analysis System (IDAS) Software: Version 3 (User's Manual)

    National Research Council Canada - National Science Library

    Cuffney, Thomas F

    2003-01-01

    ... as part of the National Water-Quality Assessment Program and stored in the Biological Transactional Database (Bio-TDB). The IDAS software is a stand-alone program for personal computers that run Microsoft...

  1. Environmental Restoration Program pollution prevention performance measures for FY 1993 and 1994 remedial investigations: Generator training manual

    International Nuclear Information System (INIS)

    1993-03-01

    This computer-based program is designed to help waste generators in the Environmental Restoration (ER) Program prevent pollution at the DOE Oak Ridge Field Office (DOE-OR) facilities in Oak Ridge, Paducah, and Portsmouth. The Numerical Scoring System (NSS) is an interactive system designed to maintain data on ER Program pollution prevention efforts and to measure the success of these efforts through the ER Program life cycle

  2. Environmental Restoration Program pollution prevention performance measures for FY 1993 and 1994 remedial investigations: Management training manual

    International Nuclear Information System (INIS)

    1993-03-01

    This computer-based program is designed to help waste generators in the Environmental Restoration (ER) Program prevent pollution at the DOE Oak Ridge Field Office (DOE-OR) facilities in Oak Ridge, Paducah, and Portsmouth. The Numerical Scoring System (NSS) is an interactive system designed to maintain data on ER Program pollution prevention efforts and to measure the success of these efforts through the ER Program life cycle

  3. Look and Do Ancient Greece. Teacher's Manual: Primary Program, Greek Art & Architecture [and] Workbook: The Art and Architecture of Ancient Greece [and] K-4 Videotape. History through Art and Architecture.

    Science.gov (United States)

    Luce, Ann Campbell

    This resource, containing a teacher's manual, reproducible student workbook, and a color teaching poster, is designed to accompany a 21-minute videotape program, but may be adapted for independent use. Part 1 of the program, "Greek Architecture," looks at elements of architectural construction as applied to Greek structures, and…

  4. The Chapter I Challenge: Colorado's Contribution 1995.

    Science.gov (United States)

    Petro, Janice Rose

    Chapter I of the Elementary and Secondary Education Act (ESEA) is the largest federally-funded program designed to provide services to elementary and secondary students to meet the special needs of educationally deprived students who reside in areas with high concentrations of low-income families. The 1994-95 school year is the last year of…

  5. Chapter 10:Hardwoods for timber bridges

    Science.gov (United States)

    James P. Wacker; Ed T. Cesa

    2005-01-01

    This chapter describes the joint efforts of the Forest Service and the FHWA to administer national programs including research, demonstration bridges, and technology transfer components. Summary information on a number of Forest Service-WIT demonstration bridges constructed with hardwoods is also provided.

  6. Radiology Aide. Instructor Key [and] Student Manual.

    Science.gov (United States)

    Hartwein, Jon; Dunham, John

    This manual can be used independently by students in secondary health occupations programs or by persons receiving on-the-job training in a radiology department. The manual includes an instructor's key that provides answers to the activity sheets and unit evaluations. The manual consists of the following five units: (1) orientation to radiology;…

  7. Chapter 6: Conclusions and recommendations

    International Nuclear Information System (INIS)

    1995-01-01

    This chapter provides a brief summary of conclusions with respect to project implementation issues. Furthermore, the chapter contains recommendations on future applications of the modelling system and on water resources management in the project area

  8. Summary and conclusions [Chapter 11

    Science.gov (United States)

    Daniel G. Neary; John N. Rinne; Alvin L.. Medina

    2012-01-01

    Summaries and conclusions of each chapter are compiled here to provide a “Quick Reference” guide of major results and recommendations for the UVR. More detail can be obtained from individual chapters.

  9. New Oxford style manual

    CERN Document Server

    2012-01-01

    The New Oxford Style Manual brings together two essential reference works in a single volume: New Hart's Rules and the New Oxford Dictionary for Writers and Editors. New Hart's Rules, Oxford's definitive guide to style, consists of 20 chapters that provide authoritative and expert advice on how to prepare copy for publication. Topics covered include how to use italic, roman, and other type treatments, numbers and dates, law and legal references, illustrations, notes and references, and bibliographies. The guidelines are complemented by the New Oxford Dictionary for Writers and Editors, which features 25,000 alphabetically arranged entries giving authoritative advice on those words and names which raise questions time and time again because of spelling, capitalization, hyphenation, or cultural and historical context. Entries give full coverage of recommended spellings, variant forms, confusable words, hyphenation, capitalization, foreign and specialist terms, proper names, and abbreviations. The dictionary a...

  10. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE), Version 5.0: Integrated Reliability and Risk Analysis System (IRRAS) reference manual. Volume 2

    International Nuclear Information System (INIS)

    Russell, K.D.; Kvarfordt, K.J.; Skinner, N.L.; Wood, S.T.; Rasmuson, D.M.

    1994-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs), primarily for nuclear power plants. The Integrated Reliability and Risk Analysis System (IRRAS) is a state-of-the-art, microcomputer-based probabilistic risk assessment (PRA) model development and analysis tool to address key nuclear plant safety issues. IRRAS is an integrated software tool that gives the use the ability to create and analyze fault trees and accident sequences using a microcomputer. This program provides functions that range from graphical fault tree construction to cut set generation and quantification to report generation. Version 1.0 of the IRRAS program was released in February of 1987. Since then, many user comments and enhancements have been incorporated into the program providing a much more powerful and user-friendly system. This version has been designated IRRAS 5.0 and is the subject of this Reference Manual. Version 5.0 of IRRAS provides the same capabilities as earlier versions and ads the ability to perform location transformations, seismic analysis, and provides enhancements to the user interface as well as improved algorithm performance. Additionally, version 5.0 contains new alphanumeric fault tree and event used for event tree rules, recovery rules, and end state partitioning

  11. VASCOMP 2. The V/STOL aircraft sizing and performance computer program. Volume 6: User's manual, revision 3

    Science.gov (United States)

    Schoen, A. H.; Rosenstein, H.; Stanzione, K.; Wisniewski, J. S.

    1980-01-01

    This report describes the use of the V/STOL Aircraft Sizing and Performance Computer Program (VASCOMP II). The program is useful in performing aircraft parametric studies in a quick and cost efficient manner. Problem formulation and data development were performed by the Boeing Vertol Company and reflects the present preliminary design technology. The computer program, written in FORTRAN IV, has a broad range of input parameters, to enable investigation of a wide variety of aircraft. User oriented features of the program include minimized input requirements, diagnostic capabilities, and various options for program flexibility.

  12. Manual for Reducing Educational Unit Costs in Latin American Countries.

    Science.gov (United States)

    Centro Multinacional de Investigacion Educativa, San Jose (Costa Rica).

    Designed for educational administrators, this manual provides suggestions for reducing educational unit costs in Latin America without reducing the quality of the education. Chapter one defines unit cost concepts and compares the costs of the Latin American countries. Chapter two deals with the different policies which could affect the principal…

  13. Regulations Pertaining to Section 8 of Chapter 636 of the Acts of 1974, Regarding Magnet School Facilities (Subsection 37I), and Magnet Educational Programs (Subsection 37J).

    Science.gov (United States)

    Massachusetts State Dept. of Education, Boston.

    Racial balance is the primary goal of the regulations presented in this document. For the purpose of expending funds under these regulations, the terms "magnet school facilities" and "magnet educational program" are defined and school eligibility requirements are listed. Program requirements are also listed along with proposals…

  14. Chapter 13. Radionuclides in medicine

    International Nuclear Information System (INIS)

    Toelgyessy, J.; Harangozo, M.

    2000-01-01

    This is a chapter of textbook of radioecology for university students. In this chapter authors deal with problems connected with using of radionuclides in medicine. Methods of treatment with using of radionuclides are reviewed. Chapter consists of next parts: (1) Remotion of thyroid gland; (2) Treatment of cerebrally tumour in nuclear reactor; (3) Artificial heart

  15. BEACON/MOD: a computer program for thermal-hydraulic analysis of nuclear reactor containments - user's manual

    International Nuclear Information System (INIS)

    Broadus, C.R.; Doyle, R.J.; James, S.W.; Lime, J.F.; Mings, W.J.

    1980-04-01

    The BEACON code is a best-estimate, advanced containment code designed to perform a best-estimate analysis of the flow of a mixture of air, water, and steam in a nuclear reactor containment system under loss-of-coolant accident conditions. The code can simulate two-component, two-phase fluid flow in complex geometries using a combination of two-dimensional, one-dimensional, and lumped-parameter representations for the various parts of the system. The current version of BEACON, which is designated BEACON/MOD3, contains mass and heat transfer models for wall film and wall conduction. It is suitable for the evaluation of short-term transients in dry-containment systems. This manual describes the models employed in BEACON/MOD3 and specifies code implementation requirements. It provides application information for input data preparation and for output data interpretation

  16. Chapter 2: Irradiators

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2018-04-01

    The chapter 2 presents the subjects: 1) gamma irradiators which includes: Category-I gamma irradiators (self-contained); Category-II gamma irradiators (panoramic and dry storage); Category-III gamma irradiators (self-contained in water); Category-IV gamma irradiators (panoramic and wet storage); source rack for Category-IV gamma irradiators; product transport system for Category-IV gamma irradiators; radiation shield for gamma irradiators; 2) accelerators which includes: Category-I Accelerators (shielded irradiator); Category-II Accelerators (irradiator inside a shielded room); Irradiation application examples.

  17. Astronaut training manual

    Science.gov (United States)

    Coleman, E. A.

    1980-01-01

    Scientific information from previous space flights, space medicine, exercise physiology, and sports medicine was used to prepare a physical fitness manual suitable for use by members of the NASA astronaut population. A variety of scientifically valid exercise programs and activities suitable for the development of physical fitness are provided. Programs, activities, and supportive scientific data are presented in a concise, easy to read format so as to permit the user to select his or her mode of training with confidence and devote time previously spent experimenting with training routines to preparation for space flight. The programs and activities included were tested and shown to be effective and enjoyable.

  18. Treatment for Abused and Neglected Children. The User Manual Series.

    Science.gov (United States)

    Martin, Harold P.

    This manual brings current knowledge about the needs of abused and neglected children together with practical ideas about what can be done to meet those needs. Designed primarily for use by child protective service (CPS) workers, the manual may also be used by other professionals dealing with child abuse and neglect. Chapter 1 briefly discusses…

  19. Metrication manual

    International Nuclear Information System (INIS)

    Harper, A.F.A.; Digby, R.B.; Thong, S.P.; Lacey, F.

    1978-04-01

    In April 1978 a meeting of senior metrication officers convened by the Commonwealth Science Council of the Commonwealth Secretariat, was held in London. The participants were drawn from Australia, Bangladesh, Britain, Canada, Ghana, Guyana, India, Jamaica, Papua New Guinea, Solomon Islands and Trinidad and Tobago. Among other things, the meeting resolved to develop a set of guidelines to assist countries to change to SI and to compile such guidelines in the form of a working manual

  20. Diagnostic and treatment manual of urological cancer

    International Nuclear Information System (INIS)

    Paz y Mino, Milton; Tafur, Fausto; Cornejo, Francisco; Gaibor, Jose; Bueno, Cesar; Basantes, Amparito

    2004-01-01

    This book compiles different opinions about researches, diagnosis, methods, procedures and treatment of urological cancer, which will be useful for physicians and specialists of this illness. This manual is well structured in eight chapters with references, illustrations, figures and tables about neoplasms of kidney, urinary tract, urogenital system. This document is a bibliographic revision about ecuadorian experience in urological cancer

  1. Extract from IAEA's Resources Manual in Nuclear Medicine - Part 2. - Human Resources Development

    International Nuclear Information System (INIS)

    2003-01-01

    The Nuclear Medicine Section of the International Atomic Energy Agency is now engaged in finalizing a reference manual in nuclear medicine, entitled, 'Resources Manual in Nuclear Medicine'. Several renowned professionals from all over the world, from virtually all fields of nuclear medicine have contributed to this manual. The World Journal of Nuclear Medicine will publish a series of extracts from this manual as previews. This is the second extract from the Resources Manual, Part-2 of the chapter on Human Resources Development. (author)

  2. Quality Management. Chapter 19

    Energy Technology Data Exchange (ETDEWEB)

    Hiles, P. A. [Glan Clwyd Hospital, Bodelwyddan (United Kingdom); McLean, I. D. [International Atomic Energy Agency, Vienna (Austria); Christofides, S. [New Nicosia General Hospital, Nicosia (Cyprus)

    2014-09-15

    This chapter introduces the principles and definitions of quality management systems (QMSs) for radiology facilities, to give a framework to assist in the setting up of such systems and to emphasize the role of the medical physicist in this context. While there is a diversity of terms currently in use to describe quality processes both generally and specifically within radiology, there is broad agreement that the effective management of radiation medicine services demands a quality culture that includes a systematic approach to the elements that govern the delivery of that service. Therefore, the concept of quality assurance (QA) within the radiological facility covers, in its widest sense, all those factors that affect the intended outcome, that is, a clinical diagnosis. The medical physicist has an important role in the overall QMS, especially, but not exclusively, with respect to the equipment performance. A worked example of a quality control (QC) programme is included at the end of the chapter, to demonstrate the depth of detail and involvement of the medical physicist.

  3. MAP user's manual copyright

    International Nuclear Information System (INIS)

    Pillsbury, R.D. Jr.

    1991-12-01

    The program MITMAP represents a set of general purpose, two- dimensional, finite element programs for the calculation of magnetic fields. It consists of the program MAP and MAP2DJ. The two programs are used to solve different electromagnetic problems, but they have a common set of subrountines for pre- and postprocessing. Originally separate programs, they have been combined to make modification easier. The manuals, however, will remain separate. The program MAP is described in this manual. MAP is applicable to the class of problems with two-dimensional-planar or axisymmetric - geometries, in which the current density and the magnetic vector potential have only a single nonvanishing component. The single component is associated with the direction that is perpendicular to the plane of the problem and is invariant with respect to that direction. Maxwell's equations can be reduced to a solver diffusion equation in terms of the single, nonvanishing component of the magnetic vector potential for planar problems and to a single component of a vector potential for planar problems and to a single component of a vector diffusion equation for axisymmetric problems. The magnetic permeability appears in the governing equation. The permeability may be a function of the magnetic flux density. In addition, any electrically conducting material present will have eddy currents induced by a time varying magnetic field. These eddy currents must be included in the solution process. This manual provides a description of the structure of the input data and output for the program. There are several example problems presented that illustrate the major program features. Appendices are included that contain a derivation of the governing equations and the application of the finite element method to the solution of the equations

  4. Methane measurements manual; Handbok metanmaetningar

    Energy Technology Data Exchange (ETDEWEB)

    Holmgren, Magnus Andreas (SP Technical research institute of Sweden, Boraas (Sweden))

    2011-02-15

    Emissions to air in different parts of the system may arise in biogas plants, where there is biological treatment of organic matter by anaerobic degradation, and during upgrading of biogas to vehicle fuel. There are mainly four reasons why these emissions must be minimized. These are safety, greenhouse gas emissions, economy and smell. This manual gathers experience of several years of work with measurement of methane emissions from biogas and upgrading facilities. This work has been done mainly in the context of Swedish Waste Management's system of voluntary commitment. The purpose of this manual is to standardize methods and procedures when methane measurements are carried out so that the results are comparable between different providers. The main target group of the manual is measurement consultants performing such measurements. Calculation template in Excel is part of the manual, which further contributes to the measurements evaluated in a standardized way. The manual contains several examples which have been calculated in the accompanying Excel template. The handbook also contains a chapter mainly intended for facility staff, in which implementation of accurate leak detection is described, and where there are hints of a system of so-called intermediate inspections to detect leaks in time

  5. Education Demographic and Geographic Estimates Program (EDGE): Locale Boundaries User's Manual. NCES 2016-012

    Science.gov (United States)

    Geverdt, Douglas E.

    2015-01-01

    The National Center for Education Statistics (NCES) Education Demographic and Geographic Estimates (EDGE) program develops geographic data to help policymakers, program administrators, and the public understand relationships between educational institutions and the communities they serve. One of the commonly used geographic data items is the NCES…

  6. Instructor's manual to accompany calculus with analytic geometry

    CERN Document Server

    Zhou, Yong

    1978-01-01

    Instructor's Manual to Accompany Calculus with Analytic Geometry is an instructor's manual on calculus with analytic geometry. It contains answers to even-numbered exercises and solutions of selected even- and odd-numbered exercises. Comments on selected exercises are included.Comprised of 18 chapters, this book first presents answers and solutions to exercises relating to functions and graphs. The next chapter is about derivatives and covers topics ranging from the slope problem to limits, sums and products, and quotients and square roots, along with limits and continuity. Subsequent chapters

  7. Estimating boiling water reactor decommissioning costs. A user's manual for the BWR Cost Estimating Computer Program (CECP) software: Draft report for comment

    International Nuclear Information System (INIS)

    Bierschbach, M.C.

    1994-12-01

    With the issuance of the Decommissioning Rule (July 27, 1988), nuclear power plant licensees are required to submit to the U.S. Regulatory Commission (NRC) for review, decommissioning plans and cost estimates. This user's manual and the accompanying Cost Estimating Computer Program (CECP) software provide a cost-calculating methodology to the NRC staff that will assist them in assessing the adequacy of the licensee submittals. The CECP, designed to be used on a personal computer, provides estimates for the cost of decommissioning BWR power stations to the point of license termination. Such cost estimates include component, piping, and equipment removal costs; packaging costs; decontamination costs; transportation costs; burial costs; and manpower costs. In addition to costs, the CECP also calculates burial volumes, person-hours, crew-hours, and exposure person-hours associated with decommissioning

  8. Individualization of a Manualized Pressure Ulcer Prevention Program: Targeting Risky Life Circumstances Through a Community-Based Intervention for People with Spinal Cord Injury

    Science.gov (United States)

    Vaishampayan, Ashwini; Clark, Florence; Carlson, Mike; Blanche, Erna Imperatore

    2012-01-01

    Purpose To sensitize practitioners working with individuals with spinal cord injury to the complex life circumstances that are implicated in the development of pressure ulcers, and to document the ways that interventions can be adapted to target individual needs. Methods Content analysis of weekly fidelity/ quality control meetings that were undertaken as part of a lifestyle intervention for pressure ulcer prevention in community-dwelling adults with spinal cord injury. Results Four types of lifestyle-relevant challenges to ulcer prevention were identified: risk-elevating life circumstances, communication difficulties, equipment problems, and individual personality issues. Intervention flexibility was achieved by changing the order of treatment modules, altering the intervention content or delivery approach, or going beyond the stipulated content. Conclusion Attention to recurrent types of individual needs, along with explicit strategies for tailoring manualized interventions, has potential to enhance pressure ulcer prevention efforts for adults with spinal cord injury. Target audience This continuing education article is intended for practitioners interested in learning about a comprehensive, context-sensitive, community-based pressure ulcer prevention program for people with spinal cord injury. Objectives After reading this article, the reader should be able to: Describe some of the contextual factors that increase pressure ulcer risk in people with spinal cord injury living in the community.Distinguish between tailored and individualized intervention approaches.Identify the issues that must be taken into account to design context-sensitive, community-based pressure ulcer prevention programs for people with spinal cord injury.Describe approaches that can be used to individualize manualized interventions. PMID:21586911

  9. RELAP4/MOD5: a computer program for transient thermal-hydraulic analysis of nuclear reactors and related systems. User's manual. Volume II. Program implementation

    International Nuclear Information System (INIS)

    1976-09-01

    This portion of the RELAP4/MOD5 User's Manual presents the details of setting up and entering the reactor model to be evaluated. The input card format and arrangement is presented in depth, including not only cards for data but also those for editing and restarting. Problem initalization including pressure distribution and energy balance is discussed. A section entitled ''User Guidelines'' is included to provide modeling recommendations, analysis and verification techniques, and computational difficulty resolution. The section is concluded with a discussion of the computer output form and format

  10. Palaeoclimate. Chapter 6

    Energy Technology Data Exchange (ETDEWEB)

    Jansen, E.; Overpeck, J.; Briffa, K.R.; Duplessy, J.C.; Joos, F.; Masson-Delmotte, V.; Olago, D.; Otto-Bliesner, B.; Peltier, W.R.; Rahmstorf, S.; Ramesh, R.; Raynaud, D.; Rind, D.; Solomina, O.; Villalba, R.; Zhang, D.

    2007-09-15

    This chapter assesses palaeoclimatic data and knowledge of how the climate system changes over interannual to millennial time scales, and how well these variations can be simulated with climate models. Additional palaeoclimatic perspectives are included in other chapters. Palaeoclimate science has made significant advances since the 1970s, when a primary focus was on the origin of the ice ages, the possibility of an imminent future ice age, and the first explorations of the so-called Little Ice Age and Medieval Warm Period. Even in the first IPCC assessment, many climatic variations prior to the instrumental record were not that well known or understood. Fifteen years later, understanding is much improved, more quantitative and better integrated with respect to observations and modelling. After a brief overview of palaeoclimatic methods, including their strengths and weaknesses, this chapter examines the palaeoclimatic record in chronological order, from oldest to youngest. This approach was selected because the climate system varies and changes over all time scales, and it is instructive to understand the contributions that lower-frequency patterns of climate change might make in influencing higher-frequency patterns of variability and change. In addition, an examination of how the climate system has responded to large changes in climate forcing in the past is useful in assessing how the same climate system might respond to the large anticipated forcing changes in the future. Cutting across this chronologically based presentation are assessments of climate forcing and response, and of the ability of state-of-the-art climate models to simulate the responses. Perspectives from palaeoclimatic observations, theory and modelling are integrated wherever possible to reduce uncertainty in the assessment. Several sections also assess the latest developments in the rapidly advancing area of abrupt climate change, that is, forced or unforced climatic change that involves

  11. Palaeoclimate. Chapter 6

    International Nuclear Information System (INIS)

    Jansen, E.; Overpeck, J.; Briffa, K.R.; Duplessy, J.C.; Joos, F.; Masson-Delmotte, V.; Olago, D.; Otto-Bliesner, B.; Peltier, W.R.; Rahmstorf, S.; Ramesh, R.; Raynaud, D.; Rind, D.; Solomina, O.; Villalba, R.; Zhang, D.

    2007-01-01

    This chapter assesses palaeoclimatic data and knowledge of how the climate system changes over interannual to millennial time scales, and how well these variations can be simulated with climate models. Additional palaeoclimatic perspectives are included in other chapters. Palaeoclimate science has made significant advances since the 1970s, when a primary focus was on the origin of the ice ages, the possibility of an imminent future ice age, and the first explorations of the so-called Little Ice Age and Medieval Warm Period. Even in the first IPCC assessment, many climatic variations prior to the instrumental record were not that well known or understood. Fifteen years later, understanding is much improved, more quantitative and better integrated with respect to observations and modelling. After a brief overview of palaeoclimatic methods, including their strengths and weaknesses, this chapter examines the palaeoclimatic record in chronological order, from oldest to youngest. This approach was selected because the climate system varies and changes over all time scales, and it is instructive to understand the contributions that lower-frequency patterns of climate change might make in influencing higher-frequency patterns of variability and change. In addition, an examination of how the climate system has responded to large changes in climate forcing in the past is useful in assessing how the same climate system might respond to the large anticipated forcing changes in the future. Cutting across this chronologically based presentation are assessments of climate forcing and response, and of the ability of state-of-the-art climate models to simulate the responses. Perspectives from palaeoclimatic observations, theory and modelling are integrated wherever possible to reduce uncertainty in the assessment. Several sections also assess the latest developments in the rapidly advancing area of abrupt climate change, that is, forced or unforced climatic change that involves

  12. User's manual for the National Water-Quality Assessment Program Invertebrate Data Analysis System (IDAS) software, version 5

    Science.gov (United States)

    Cuffney, Thomas F.; Brightbill, Robin A.

    2011-01-01

    The Invertebrate Data Analysis System (IDAS) software was developed to provide an accurate, consistent, and efficient mechanism for analyzing invertebrate data collected as part of the U.S. Geological Survey National Water-Quality Assessment (NAWQA) Program. The IDAS software is a stand-alone program for personal computers that run Microsoft Windows(Registered). It allows users to read data downloaded from the NAWQA Program Biological Transactional Database (Bio-TDB) or to import data from other sources either as Microsoft Excel(Registered) or Microsoft Access(Registered) files. The program consists of five modules: Edit Data, Data Preparation, Calculate Community Metrics, Calculate Diversities and Similarities, and Data Export. The Edit Data module allows the user to subset data on the basis of taxonomy or sample type, extract a random subsample of data, combine or delete data, summarize distributions, resolve ambiguous taxa (see glossary) and conditional/provisional taxa, import non-NAWQA data, and maintain and create files of invertebrate attributes that are used in the calculation of invertebrate metrics. The Data Preparation module allows the user to select the type(s) of sample(s) to process, calculate densities, delete taxa on the basis of laboratory processing notes, delete pupae or terrestrial adults, combine lifestages or keep them separate, select a lowest taxonomic level for analysis, delete rare taxa on the basis of the number of sites where a taxon occurs and (or) the abundance of a taxon in a sample, and resolve taxonomic ambiguities by one of four methods. The Calculate Community Metrics module allows the user to calculate 184 community metrics, including metrics based on organism tolerances, functional feeding groups, and behavior. The Calculate Diversities and Similarities module allows the user to calculate nine diversity and eight similarity indices. The Data Export module allows the user to export data to other software packages (CANOCO, Primer

  13. Disease Management, Case Management, Care Management, and Care Coordination: A Framework and a Brief Manual for Care Programs and Staff.

    Science.gov (United States)

    Ahmed, Osman I

    2016-01-01

    With the changing landscape of health care delivery in the United States since the passage of the Patient Protection and Affordable Care Act in 2010, health care organizations have struggled to keep pace with the evolving paradigm, particularly as it pertains to population health management. New nomenclature emerged to describe components of the new environment, and familiar words were put to use in an entirely different context. This article proposes a working framework for activities performed in case management, disease management, care management, and care coordination. The author offers standard working definitions for some of the most frequently used words in the health care industry with the goal of increasing consistency for their use, especially in the backdrop of the Centers for Medicaid & Medicare Services offering a "chronic case management fee" to primary care providers for managing the sickest, high-cost Medicare patients. Health care organizations performing case management, care management, disease management, and care coordination. Road map for consistency among users, in reporting, comparison, and for success of care management/coordination programs. This article offers a working framework for disease managers, case and care managers, and care coordinators. It suggests standard definitions to use for disease management, case management, care management, and care coordination. Moreover, the use of clear terminology will facilitate comparing, contrasting, and evaluating all care programs and increase consistency. The article can improve understanding of care program components and success factors, estimate program value and effectiveness, heighten awareness of consumer engagement tools, recognize current state and challenges for care programs, understand the role of health information technology solutions in care programs, and use information and knowledge gained to assess and improve care programs to design the "next generation" of programs.

  14. ETAP user's manual

    International Nuclear Information System (INIS)

    Watanabe, Norio; Higuchi, Suminori.

    1990-11-01

    The event tree analysis technique has been used in Probabilistic Safety Assessment for LWRs to delineate various accident scenarios leading to core melt or containment failure and to evaluate their frequencies. This technique often requires manual preparation of event trees with iterative process and time-consuming work in data handling. For the purpose of reducing manual efforts in event tree analysis, we developed a new software package named ETAP (Event Tree Analysis Supporting Program) for event tree analysis. ETAP is an interactive PC-based program which has the ability to construct, update, document, and quantify event trees. Because of its fast running capability to quantify event trees, use of the EATP program can make it easy to perform the sensitivity studies on a variety of system/containment performance issues. This report provides a user's manual for ETAP, which describes the structure, installation, and use of EATP. This software runs on NEC/PC-9800 or compatible PCs that have a 640 KB memory and MS-DOS 2.11 or higher. (author)

  15. Chapter 8: Youth Culture

    DEFF Research Database (Denmark)

    Stald, Gitte Bang

    2016-01-01

    Gitte Stald has been researching mobile technologies since their early days of adoption by younger audiences. In her talk, she focuses on adolescents and their mobile media use. Stald shares her findings from the longitudinal and cross-cultural studies she has been conducting over the years....... The chapter builds on findings from a Danish and a European context, but they can be expanded to think about mobile youth culture in general. Gitte Stald discusses the concepts of digital natives and digital immigrants, sharing, immediacy, and the feeling of presence (or absent presence), social coordination...... their phones as indispensable to managing their social lives. Stald observes that while being connected all the time gives youth a sense of freedom, control and autonomy, their increasing access to mobile phones is a cause anytime, anywhere access to one another is now possible with mobile phones, time...

  16. CHAPTER 1. Introduction

    KAUST Repository

    Zhang, Lianbin; Wang, Peng

    2016-01-01

    With the development of modern industry and modern economies, environmental problems, especially water pollution and water scarcity, have become the most serious global challenges. In dealing with these challenges, various kinds of functionalized materials and devices are purposefully developed, fabricated, and utilized. It is clear that smart materials have not only provided effective strategies for solving environmental problems, but have also exhibited unprecedented advantages over traditional materials by integrating multifunctions and/or processes into one advanced device/material. In this book, we will present a broad collection of bioinspired smart materials and systems that are used in environmental problem solving. The topics of these chapters span from bioinspired fog collection, self-healing materials, responsive particle-stabilized emulsions, smart draw solutions in forward osmosis, slippery coating, insightful analysis of problems and opportunities for hydrophobic surfaces applied in real conditions, to superwetting materials for oil-water separation.

  17. Melt inclusions: Chapter 6

    Science.gov (United States)

    ,; Lowenstern, J. B.

    2014-01-01

    Melt inclusions are small droplets of silicate melt that are trapped in minerals during their growth in a magma. Once formed, they commonly retain much of their initial composition (with some exceptions) unless they are re-opened at some later stage. Melt inclusions thus offer several key advantages over whole rock samples: (i) they record pristine concentrations of volatiles and metals that are usually lost during magma solidification and degassing, (ii) they are snapshots in time whereas whole rocks are the time-integrated end products, thus allowing a more detailed, time-resolved view into magmatic processes (iii) they are largely unaffected by subsolidus alteration. Due to these characteristics, melt inclusions are an ideal tool to study the evolution of mineralized magma systems. This chapter first discusses general aspects of melt inclusions formation and methods for their investigation, before reviewing studies performed on mineralized magma systems.

  18. CHAPTER 1. Introduction

    KAUST Repository

    Zhang, Lianbin

    2016-02-23

    With the development of modern industry and modern economies, environmental problems, especially water pollution and water scarcity, have become the most serious global challenges. In dealing with these challenges, various kinds of functionalized materials and devices are purposefully developed, fabricated, and utilized. It is clear that smart materials have not only provided effective strategies for solving environmental problems, but have also exhibited unprecedented advantages over traditional materials by integrating multifunctions and/or processes into one advanced device/material. In this book, we will present a broad collection of bioinspired smart materials and systems that are used in environmental problem solving. The topics of these chapters span from bioinspired fog collection, self-healing materials, responsive particle-stabilized emulsions, smart draw solutions in forward osmosis, slippery coating, insightful analysis of problems and opportunities for hydrophobic surfaces applied in real conditions, to superwetting materials for oil-water separation.

  19. Chapter 6: Temperature

    Science.gov (United States)

    Jones, Leslie A.; Muhlfeld, Clint C.; Hauer, F. Richard; F. Richard Hauer,; Lamberti, G.A.

    2017-01-01

    Stream temperature has direct and indirect effects on stream ecology and is critical in determining both abiotic and biotic system responses across a hierarchy of spatial and temporal scales. Temperature variation is primarily driven by solar radiation, while landscape topography, geology, and stream reach scale ecosystem processes contribute to local variability. Spatiotemporal heterogeneity in freshwater ecosystems influences habitat distributions, physiological functions, and phenology of all aquatic organisms. In this chapter we provide an overview of methods for monitoring stream temperature, characterization of thermal profiles, and modeling approaches to stream temperature prediction. Recent advances in temperature monitoring allow for more comprehensive studies of the underlying processes influencing annual variation of temperatures and how thermal variability may impact aquatic organisms at individual, population, and community based scales. Likewise, the development of spatially explicit predictive models provide a framework for simulating natural and anthropogenic effects on thermal regimes which is integral for sustainable management of freshwater systems.

  20. Chapter 15. Attachments

    International Nuclear Information System (INIS)

    2001-01-01

    In this chapter used abbreviations and radiation safety of NPPs in Slovak Republic are presented. Results of monitoring of NPP Bohunice V-1 and V-2 as well as NPP Mochovce are presented. A brief account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic in 2000 is presented. The collective dose is one of the fundamental indicators to assess the level of nuclear safety and safety culture. This is the total dose of both external and internal exposure of the whole of the body measured with a personal dosimeter and a calculated internal exposure over a certain period of time. Measured doses to the utility personnel, the staff of supplier organisations and official working visits are included

  1. Master schedule for CY-1981 Hanford environmental surveillance routine program

    International Nuclear Information System (INIS)

    Blumer, P.J.; Sula, M.J.; Eddy, P.A.

    1980-12-01

    The current schedule of data collection for the routine environmental surveillance program at the Hanford Site is provided. Questions about specific entries should be referred to the authors since modifications to the schedule are made during the year and special areas of study, usually of short duration, are not scheduled. The environmental surveillance program objectives are to evaluate the levels of radioactive and nonradioactive pollutants in the Hanford environs, as required in Manual Chapter 0513, and to monitor Hanford operations for compliance with applicable environmental criteria given in Manual Chapter 0524 and Washington State Water Quality Standards. Air quality data obtained in a separate program are also reported. The collection schedule for potable water is shown but it is not part of the routine environmental surveillance program. Schedules are presented for the following subjects: air, Columbia River, sanitary water, surface water, ground water, foodstuffs, wildlife, soil and vegetation, external radiation measurement, portable instrument surveys, and surveillance of waste disposal sites

  2. Systems analysis programs for hands-on integrated reliability evaluations (SAPHIRE) version 5.0, technical reference manual

    International Nuclear Information System (INIS)

    Russell, K.D.; Atwood, C.L.; Galyean, W.J.; Sattison, M.B.; Rasmuson, D.M.

    1994-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs), primarily for nuclear power plants. This volume provides information on the principles used in the construction and operation of Version 5.0 of the Integrated Reliability and Risk Analysis System (IRRAS) and the System Analysis and Risk Assessment (SARA) system. It summarizes the fundamental mathematical concepts of sets and logic, fault trees, and probability. This volume then describes the algorithms that these programs use to construct a fault tree and to obtain the minimal cut sets. It gives the formulas used to obtain the probability of the top event from the minimal cut sets, and the formulas for probabilities that are appropriate under various assumptions concerning repairability and mission time. It defines the measures of basic event importance that these programs can calculate. This volume gives an overview of uncertainty analysis using simple Monte Carlo sampling or Latin Hypercube sampling, and states the algorithms used by these programs to generate random basic event probabilities from various distributions. Further references are given, and a detailed example of the reduction and quantification of a simple fault tree is provided in an appendix

  3. EPCARD (European Program Package for the Calculation of Aviation Route Doses). User's manual for version 3.2

    International Nuclear Information System (INIS)

    Schraube, H.; Leuthold, G.P.; Schraube, G.; Heinrich, W.; Roesler, S.; Mares, V.

    2002-01-01

    The GSF-National Research Center has developed the computer program EPCARD (European program package for the calculation of aviation route doses) jointly with scientists from Siegen University. With the program it is possible calculate the radiation dose obtained by individuals along any aviation route at flight altitudes between 5000 m and 25000 m, both in terms of ''ambient dose equivalent'' and ''effective dose''. Dose rates at any point in the atmosphere may be calculated for comparison with verification experiments, as well as simulated instrument readings, if the response characteristics of the instruments are known. The program fulfills the requirements of the European Council Directive 96/29/EURATOM and of the subsequent European national regulations. This report contains essentially all information, which is necessary to run EPCARDv3.2 from a standard PC. The program structure is depicted and the file structure described in detail, which permits to calculate the large number of data sets for the daily record keeping of airline crews and other frequently flying persons. Additionally, some information is given on the basic physical data, which is available from referenced publications. (orig.)

  4. REX - a program for the analysis of X-ray reflectivity data: user guide and programmer manual

    International Nuclear Information System (INIS)

    Crabb, T.A.; Gibson, P.N.

    1992-12-01

    A FORTRAN program REX, which has been developed to facilitate the interpretation of X-ray reflectivity data, is described. The program allows the simulation of reflectivity profiles as a function of either incident angle or of energy. Factors such as anomalous dispersion, and surface and interface roughness are taken into account in the model. In addition, experimental data of reflectivity as a function of incident angle can be matched to user-supplied theoretical parameters by a least-squares refinement procedure. Experimental reflectivity data recorded at several X-ray wavelengths can be analysed simultaneously, thus eliminating certain experimental errors. (author)

  5. Internal dosimetry technical basis manual

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-20

    The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.

  6. Internal dosimetry technical basis manual

    International Nuclear Information System (INIS)

    1990-01-01

    The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs

  7. NASCAP programmer's reference manual

    Science.gov (United States)

    Mandell, M. J.; Stannard, P. R.; Katz, I.

    1993-05-01

    The NASA Charging Analyzer Program (NASCAP) is a computer program designed to model the electrostatic charging of complicated three-dimensional objects, both in a test tank and at geosynchronous altitudes. This document is a programmer's reference manual and user's guide. It is designed as a reference to experienced users of the code, as well as an introduction to its use for beginners. All of the many capabilities of NASCAP are covered in detail, together with examples of their use. These include the definition of objects, plasma environments, potential calculations, particle emission and detection simulations, and charging analysis.

  8. A Course on Operational Considerations in Wastewater Treatment Plant Design. Instructor's Manual.

    Science.gov (United States)

    Cooper, John W.; And Others

    This manual contains 17 instructional units (sequenced to correspond to parallel chapters in a student's manual) focusing on upgrading the design of wastewater plant facilities and serving as a reference source for establishing criteria for upgrading wastewater treatment plants. The manual also furnishes information for modifying plant design to…

  9. Magnetic Resonance Imaging. Chapter 15

    Energy Technology Data Exchange (ETDEWEB)

    Leach, M. O. [The Institute of Cancer Research and The Royal Marsden Hospital, London (United Kingdom)

    2014-09-15

    In Chapter 14, the principles of nuclear magnetic resonance were presented, along with an introduction to image forming processes. In this chapter, magnetic resonance imaging (MRI) will be reviewed, beginning with the hardware needed and its impact on image quality. The acquisition processes and image reconstruction will be discussed, as well as the artefacts that are possible, with discussion of the important area of safety and bioeffects completing the chapter.

  10. SMACS: a system of computer programs for probabilistic seismic analysis of structures and subsystems. Volume I. User's manual

    International Nuclear Information System (INIS)

    Maslenikov, O.R.; Johnson, J.J.; Tiong, L.W.; Mraz, M.J.; Bumpus, S.; Gerhard, M.A.

    1985-03-01

    The SMACS (Seismic Methodology Analysis Chain with Statistics) system of computer programs, one of the major computational tools of the Seismic Safety Margins Research Program (SSMRP), links the seismic input with the calculation of soil-structure interaction, major structure response, and subsystem response. The seismic input is defined by ensembles of acceleration time histories in three orthogonal directions. Soil-structure interaction and detailed structural response are then determined simultaneously, using the substructure approach to SSI as implemented in the CLASSI family of computer programs. The modus operandi of SMACS is to perform repeated deterministic analyses, each analysis simulating an earthquake occurrence. Parameter values for each simulation are sampled from assumed probability distributions according to a Latin hypercube experimental design. The user may specify values of the coefficients of variation (COV) for the distributions of the input variables. At the heart of the SMACS system is the computer program SMAX, which performs the repeated SSI response calculations for major structure and subsystem response. This report describes SMAX and the pre- and post-processor codes, used in conjunction with it, that comprise the SMACS system

  11. Manual for a Volunteer Services System.

    Science.gov (United States)

    Helgerson, Linda; And Others

    This manual presents guidelines for planning, monitoring, and controlling the development and operation of volunteer assistance programs. The materials included address questions related to both the process of establishing a volunteer program and the administration of a volunteer management system. The manual is not intended to provide a blueprint…

  12. Field Manual of Wildlife Diseases

    Science.gov (United States)

    Franson, J. Christian; Friend, Milton; Gibbs, Samantha E.J.; Wild, Margaret A.

    2015-01-01

    Welcome to a new version of the “Field Manual of Wildlife Diseases.” Unlike the previous printed versions of this publication, this new version is being developed as a “living“ electronic publication. Content will periodically be added and (or) updated as warranted, and it will always be reviewed by scientific experts (“peer reviewed”) before it is released. Thus, this publication will never be completed, and readers should download revised versions of specific chapters, glossaries, and the appendixes whenever they visit the publication Web site.

  13. Attrition Cost Model Instruction Manual

    Science.gov (United States)

    Yanagiura, Takeshi

    2012-01-01

    This instruction manual explains in detail how to use the Attrition Cost Model program, which estimates the cost of student attrition for a state's higher education system. Programmed with SAS, this model allows users to instantly calculate the cost of attrition and the cumulative attrition rate that is based on the most recent retention and…

  14. Look and Do Ancient Egypt. Teacher's Manual: Primary Program, Ancient Egypt Art & Architecture [and] Workbook: The Art and Architecture of Ancient Egypt [and] K-4 Videotape. History through Art and Architecture.

    Science.gov (United States)

    Luce, Ann Campbell

    This resource contains a teaching manual, reproducible student workbook, and color teaching poster, which were designed to accompany a 2-part, 34-minute videotape, but may be adapted for independent use. Part 1 of the program, "The Old Kingdom," explains Egyptian beliefs concerning life after death as evidenced in art, architecture and…

  15. GENOVA: a generalized perturbation theory program for various applications to CANDU core physics analysis (II) - a user's manual

    International Nuclear Information System (INIS)

    Kim, Do Heon; Choi, Hang Bok

    2001-03-01

    A user's guide for GENOVA, a GENeralized perturbation theory (GPT)-based Optimization and uncertainty analysis program for Canada deuterium uranium (CANDU) physics VAriables, was prepared. The program was developed under the framework of CANDU physics design and analysis code RFSP. The generalized perturbation method was implemented in GENOVA to estimate the zone controller unit (ZCU) level upon refueling operation and calculate various sensitivity coefficients for fuel management study and uncertainty analyses, respectively. This documentation contains descriptions and directions of four major modules of GENOVA such as ADJOINT, GADJINT, PERTURB, and PERTXS so that it can be used as a practical guide for GENOVA users. This documentation includes sample inputs for the ZCU level estimation and sensitivity coefficient calculation, which are the main application of GENOVA. The GENOVA can be used as a supplementary tool of the current CANDU physics design code for advanced CANDU core analysis and fuel development

  16. Users manual for Aerospace Nuclear Safety Program six-degree-of-freedom reentry simulation (TMAGRA6C)

    International Nuclear Information System (INIS)

    Sharbaugh, R.C.

    1990-02-01

    This report documents the updated six-degree-of-freedom reentry simulation TMAGRA6C used in the Aerospace Nuclear Safety Program, ANSP. The simulation provides for the inclusion of the effects of ablation on the aerodynamic stability and drag of reentry bodies, specifically the General Purpose Heat Source, GPHS. The existing six-degree-of-freedom reentry body simulations (TMAGRA6A and TMAGRA6B) used in the JHU/APL Nuclear Safety Program do not include aerodynamic effects resulting from geometric changes to the configuration due to ablation from reentry flights. A wind tunnel test was conducted in 1989 to obtain the effects of ablation on the hypersonic aerodynamics of the GPHS module. The analyzed data were used to form data sets which are included herein in tabular form. These are used as incremental aerodynamic inputs in the new TMAGRA6C six-degree-of-freedom reentry simulation. 20 refs., 13 figs., 2 tabs

  17. Image Reconstruction. Chapter 13

    Energy Technology Data Exchange (ETDEWEB)

    Nuyts, J. [Department of Nuclear Medicine and Medical Imaging Research Center, Katholieke Universiteit Leuven, Leuven (Belgium); Matej, S. [Medical Image Processing Group, Department of Radiology, University of Pennsylvania, Philadelphia, PA (United States)

    2014-12-15

    This chapter discusses how 2‑D or 3‑D images of tracer distribution can be reconstructed from a series of so-called projection images acquired with a gamma camera or a positron emission tomography (PET) system [13.1]. This is often called an ‘inverse problem’. The reconstruction is the inverse of the acquisition. The reconstruction is called an inverse problem because making software to compute the true tracer distribution from the acquired data turns out to be more difficult than the ‘forward’ direction, i.e. making software to simulate the acquisition. There are basically two approaches to image reconstruction: analytical reconstruction and iterative reconstruction. The analytical approach is based on mathematical inversion, yielding efficient, non-iterative reconstruction algorithms. In the iterative approach, the reconstruction problem is reduced to computing a finite number of image values from a finite number of measurements. That simplification enables the use of iterative instead of mathematical inversion. Iterative inversion tends to require more computer power, but it can cope with more complex (and hopefully more accurate) models of the acquisition process.

  18. Chapter 11. Heat Exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin D.; Culver, Gene

    1998-01-01

    Most geothermal fluids, because of their elevated temperature, contain a variety of dissolved chemicals. These chemicals are frequently corrosive toward standard materials of construction. As a result, it is advisable in most cases to isolate the geothermal fluid from the process to which heat is being transferred. The task of heat transfer from the geothermal fluid to a closed process loop is most often handled by a plate heat exchanger. The two most common types used in geothermal applications are: bolted and brazed. For smaller systems, in geothermal resource areas of a specific character, downhole heat exchangers (DHEs) provide a unique means of heat extraction. These devices eliminate the requirement for physical removal of fluid from the well. For this reason, DHE-based systems avoid entirely the environmental and practical problems associated with fluid disposal. Shell and tube heat exchangers play only a minor role in low-temperature, direct-use systems. These units have been in common use in industrial applications for many years and, as a result, are well understood. For these reasons, shell and tube heat exchangers will not be covered in this chapter.

  19. Towards the next chapter

    CERN Document Server

    2013-01-01

    In the late 1970s, while the CERN community was busy preparing the SPS to operate as a collider and planning for LEP, people also had their eyes on the next chapter in the unfolding story of CERN.   That the LEP tunnel should be built with a future hadron collider in mind was a given by the end of the decade. But there had also been proposals to build large proton storage rings, or re-equip the ISR with superconducting magnets. Some people had suggested building an electron-proton collider at CERN, and there were ambitious plans looking far into the future at a possible Very Big Accelerator to be built somewhere in the world, which went by its acronym VBA. For the field of particle physics, with its very long lead times, this is part of the normal cycle, and while most of those options never came to fruition, this process did pave the way for the LHC. Today, with the LHC programme underway, the time has come for CERN to start seriously considering the options for its post-LHC future. Perhaps ...

  20. Synthesis: Chapter 19

    Science.gov (United States)

    Pardo, L.H.; Geiser, L.H.; Fenn, M.E.; Driscoll, C.T.; Goodale, C.L.; Allen, E.B.; Baron, Jill S.; Bobbink, R.; Bowman, W.D.; Clark, C.M.; Emmett, B.; Gilliam, F.S.; Greaver, T.; Hall, S.J.; Lilleskov, E.A.; Liu, L.; Lynch, J.A.; Nadelhoffer, K.; Perakis, S.S.; Robin-Abbott, M. J.; Stoddard, J.L.; Weathers, K. C.

    2011-01-01

    Human activity in the last century has led to a substantial increase in nitrogen (N) emissions and deposition (Galloway et al. 2003). Because of past, and, in some regions, continuing increases in emissions (Lehmann et al. 2005, Nilles and Conley 2001), this N deposition has reached a level that has caused or is likely to cause alterations and damage in many ecosystems across the United States. In some ecoregions, the impact of N deposition has been severe and has changed the biotic community structure and composition of ecosystems. In the Mediterranean California ecoregion, for example (see Chapter 13), replacement of native by exotic invasive vegetation is accelerated because exotic species are often more productive under elevated N deposition than native species in some California grasslands, coastal sage scrub, and desert scrub (Fenn et al. 2010, Rao and Allen 2010, Rao et al. 2010, Weiss 1999, Yoshida and Allen 2004). Such shifts in plant community composition and species richness can have consequences beyond changes in ecosystem structure: shifts may lead to overall losses in biodiversity and further impair particular threatened or endangered species (Stevens et al. 2004). Th e extirpation of the endangered checkerspot butterfl y (Euphydryas editha bayensis), because the host plant for the larval stage disappears in N-enriched ecosystems (Fenn et al. 2010, Weiss 1999), is just one example of the detrimental impacts of elevated N deposition.

  1. Chapter 8: Quality assurance

    International Nuclear Information System (INIS)

    2001-01-01

    first draft of quality manual was developed. Its structure was updated according to the review performed by the external organisation to follow as much as possible new ISO standard 9001:2000. Main activities diagrams were developed in unified manner to be included into quality manual as its basis and to identify necessary amendments of current internal procedures and to develop new ones. Activities on development of internal quality system are performed according to the approved plan under supervision of the special control team

  2. 42 Manual

    International Nuclear Information System (INIS)

    Bergstroem, Mats.

    1990-04-01

    A program for two dimensional analysis of γ-γ coincidence matrices has been written. The program is tailored to the VT340 colour graphic terminal and written in VAX-FORTRAN. The program provides viewing of the matrix as well as projections in both energy coordinates, full two dimensional Gauss fit of maximum five peaks in one arbitrarily shaped area of the matrix, etc. A method of determining the colour scale needed has been developed. (author)

  3. User's manual of BISHOP. A Bi-Phase, Sodium-Hydrogen-Oxygen system, chemical equilibrium calculation program

    International Nuclear Information System (INIS)

    Okano, Yasushi; Yamaguchi, Akira

    2001-07-01

    In an event of sodium leakage in liquid metal fast breeder reactors, liquid sodium flows out of piping, and droplet combustion might occur under a certain environmental condition. The combustion heat and reaction products should be evaluated in the sodium fire analysis codes for investigating the influence of the sodium leak age and fire incident. In order to analyze the reaction heat and products, the multi-phase chemical equilibrium calculation program for a sodium, oxygen and hydrogen system has been developed. The developed numerical program is named BISHOP, which denotes 'Bi-Phase, Sodium-Hydrogen-Oxygen, Chemical Equilibrium Calculation Program'. The Gibbs free energy minimization method is used because of the following advantages. Chemical species are easily added and changed. A variety of thermodynamic states, such as isothermal and isentropic changes, can be dealt with in addition to constant temperature and pressure processes. In applying the free energy minimization method to solve the multi-phase sodium reaction system, three new numerical calculation techniques are developed. One is theoretical simplification of phase description in equation system, the other is to extend the Gibbs free energy minimization method to a multi-phase system, and the last is to establish the efficient search for the minimum value. The reaction heat and products at the equilibrium state can be evaluated from the initial conditions, such as temperature, pressure and reactants, using BISHOP. This report describes the thermochemical basis of chemical equilibrium calculations, the system of equations, simplification models, and the procedure to prepare input data and usage of BISHOP. (author)

  4. Finite-element three-dimensional ground-water (FE3DGW) flow model - formulation, program listings and users' manual

    International Nuclear Information System (INIS)

    Gupta, S.K.; Cole, C.R.; Bond, F.W.

    1979-12-01

    The Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) Program is developing and applying the methodology for assessing the far-field, long-term post-closure safety of deep geologic nuclear waste repositories. AEGIS is being performed by Pacific Northwest Laboratory (PNL) under contract with the Office of Nuclear Waste Isolation (OWNI) for the Department of Energy (DOE). One task within AEGIS is the development of methodology for analysis of the consequences (water pathway) from loss of repository containment as defined by various release scenarios. Analysis of the long-term, far-field consequences of release scenarios requires the application of numerical codes which simulate the hydrologic systems, model the transport of released radionuclides through the hydrologic systems to the biosphere, and, where applicable, assess the radiological dose to humans. Hydrologic and transport models are available at several levels of complexity or sophistication. Model selection and use are determined by the quantity and quality of input data. Model development under AEGIS and related programs provides three levels of hydrologic models, two levels of transport models, and one level of dose models (with several separate models). This document consists of the description of the FE3DGW (Finite Element, Three-Dimensional Groundwater) Hydrologic model third level (high complexity) three-dimensional, finite element approach (Galerkin formulation) for saturated groundwater flow

  5. RELAP4/MOD5: a computer program for transient thermal-hydraulic analysis of nuclear reactors and related systems. User's manual. Volume II. Program implementation

    International Nuclear Information System (INIS)

    1976-06-01

    A discussion is presented of the use of the RELAP4/MOD5 computer program in simulating the thermal-hydraulic behavior of light-water reactor systems when subjected to postulated transients such as a LOCA, pump failure, or nuclear excursion. The volume is divided into main sections which cover: (1) program description, (2) input data, (3) problem initialization, (4) user guidelines, (5) output discussion, (6) source program description, (7) implementation requirements, (8) data files, (9) description of PLOTR4M, (10) description of STH20, (11) summary flowchart, (12) sample problems, (13) problem definition, and (14) problem input

  6. Collective Intelligence. Chapter 17

    Science.gov (United States)

    Wolpert, David H.

    2003-01-01

    Many systems of self-interested agents have an associated performance criterion that rates the dynamic behavior of the overall system. This chapter presents an introduction to the science of such systems. Formally, collectives are defined as any system having the following two characteristics: First, the system must contain one or more agents each of which we view as trying to maximize an associated private utility; second, the system must have an associated world utility function that rates the possible behaviors of that overall system. In practice, collectives are often very large, distributed, and support little, if any, centralized communication and control, although those characteristics are not part of their formal definition. A naturally occurring example of a collective is a human economy. One can identify the agents and their private utilities as the human individuals in the economy and the associated personal rewards they are each trying to maximize. One could then identify the world utility as the time average of the gross domestic product. ("World utility" per se is not a construction internal to a human economy, but rather something defined from the outside.) To achieve high world utility it is necessary to avoid having the agents work at cross-purposes lest phenomena like liquidity traps or the Tragedy of the Commons (TOC) occur, in which agents' individually pursuing their private utilities lowers world utility. The obvious way to avoid such phenomena is by modifying the agents utility functions to be "aligned" with the world utility. This can be done via punitive legislation. A real-world example of an attempt to do this was the creation of antitrust regulations designed to prevent monopolistic practices.

  7. Caltrans : construction manual

    Science.gov (United States)

    2009-08-01

    Caltrans intends this manual as a resource for all personnel engaged in contract administration. The manual establishes policies and procedures for the construction phase of Caltrans projects. However, this manual is not a contract document. It impos...

  8. Advanced Concepts. Chapter 21

    Science.gov (United States)

    Johnson, Les; Mulqueen, Jack

    2013-01-01

    Before there is a funded space mission, there must be a present need for the mission. Space science and exploration are expensive, and without a well-defined and justifiable need, no one is going to commit significant funding for any space endeavor. However, as discussed in Chapter 1, applications of space technology and many and broad, hence there are many ways to determine and establish a mission need. Robotic science missions are justified by their science return. To be selected for flight, questions like these must be addressed: What is the science question that needs answering, and will the proposed mission be the most cost-effective way to answer it? Why does answering the question require an expensive space flight, instead of some ground-based alternative? If the question can only be answered by flying in space, then why is this approach better than other potential approaches? How much will it cost? And is the technology required to answer the question in hand and ready to use? If not, then how much will it cost and how long will it take to mature the technology to a usable level? There are also many ways to justify human exploration missions, including science return, technology advancement, as well as intangible reasons, such as national pride. Nonetheless, many of the questions that need answering, are similar to those for robotic science missions: Where are the people going, why, and will the proposed mission be the most cost-effective way to get there? What is the safest method to achieve the goal? How much will it cost? And is the technology required to get there and keep the crew alive in hand and ready to use? If not, then how much will it cost and how long will it take to mature the technology to a usable level? Another reason for some groups sending spacecraft into space is for profit. Telecommunications, geospatial imaging, and tourism are examples of proven, market-driven space missions and applications. For this specific set of users, the

  9. BUCLASP 3: A computer program for stresses and buckling of heated composite stiffened panels and other structures, user's manual

    Science.gov (United States)

    Tripp, L. L.; Tamekuni, M.; Viswanathan, A. V.

    1973-01-01

    The use of the computer program BUCLASP3 is described. The code is intended for thermal stress and instability analyses of structures such as unidirectionally stiffened panels. There are two types of instability analyses that can be effected by PAINT; (1) thermal buckling, and (2) buckling due to a specified inplane biaxial loading. Any structure that has a constant cross section in one direction, that may be idealized as an assemblage of beam elements and laminated flat and curved plate strip-elements can be analyzed. The two parallel ends of the panel must be simply supported, whereas arbitrary elastic boundary conditions may be imposed along any one or both external longitudinal side. Any variation in the temperature rise (from ambient) through the cross section of a panel is considered in the analyses but it must be assumed that in the longitudinal direction the temperature field is constant. Load distributions for the externally applied inplane biaxial loads are similar in nature to the permissible temperature field.

  10. OSH technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  11. Repository Integration Program: RIP performance assessment and strategy evaluation model theory manual and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This report describes the theory and capabilities of RIP (Repository Integration Program). RIP is a powerful and flexible computational tool for carrying out probabilistic integrated total system performance assessments for geologic repositories. The primary purpose of RIP is to provide a management tool for guiding system design and site characterization. In addition, the performance assessment model (and the process of eliciting model input) can act as a mechanism for integrating the large amount of available information into a meaningful whole (in a sense, allowing one to keep the ``big picture`` and the ultimate aims of the project clearly in focus). Such an integration is useful both for project managers and project scientists. RIP is based on a `` top down`` approach to performance assessment that concentrates on the integration of the entire system, and utilizes relatively high-level descriptive models and parameters. The key point in the application of such a ``top down`` approach is that the simplified models and associated high-level parameters must incorporate an accurate representation of their uncertainty. RIP is designed in a very flexible manner such that details can be readily added to various components of the model without modifying the computer code. Uncertainty is also handled in a very flexible manner, and both parameter and model (process) uncertainty can be explicitly considered. Uncertainty is propagated through the integrated PA model using an enhanced Monte Carlo method. RIP must rely heavily on subjective assessment (expert opinion) for much of its input. The process of eliciting the high-level input parameters required for RIP is critical to its successful application. As a result, in order for any project to successfully apply a tool such as RIP, an enormous amount of communication and cooperation must exist between the data collectors, the process modelers, and the performance. assessment modelers.

  12. ARDS User Manual

    Science.gov (United States)

    Fleming, David P.

    2001-01-01

    Personal computers (PCs) are now used extensively for engineering analysis. their capability exceeds that of mainframe computers of only a few years ago. Programs originally written for mainframes have been ported to PCs to make their use easier. One of these programs is ARDS (Analysis of Rotor Dynamic Systems) which was developed at Arizona State University (ASU) by Nelson et al. to quickly and accurately analyze rotor steady state and transient response using the method of component mode synthesis. The original ARDS program was ported to the PC in 1995. Several extensions were made at ASU to increase the capability of mainframe ARDS. These extensions have also been incorporated into the PC version of ARDS. Each mainframe extension had its own user manual generally covering only that extension. Thus to exploit the full capability of ARDS required a large set of user manuals. Moreover, necessary changes and enhancements for PC ARDS were undocumented. The present document is intended to remedy those problems by combining all pertinent information needed for the use of PC ARDS into one volume.

  13. Techniques in cancer research: a laboratory manual

    International Nuclear Information System (INIS)

    Deo, M.G.; Seshadri, R.; Mulherkar, R.; Mukhopadhyaya, R.

    1995-01-01

    Cancer Research Institute (CRI) works on all facets of cancer using the latest biomedical tools. For this purpose, it has established modern laboratories in different branches of cancer biology such as cell and molecular biology, biochemistry, immunology, chemical and viral oncogenesis, genetics of cancer including genetic engineering, tissue culture, cancer chemotherapy, neurooncology and comparative oncology. This manual describes the protocols used in these laboratories. There is also a chapter on handling and care of laboratory animals, an essential component of any modern cancer biology laboratory. It is hoped that the manual will be useful to biomedical laboratories, specially those interested in cancer research. refs., tabs., figs

  14. Innovative and Alternative Technology Assessment Manual

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-02-01

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  15. IMAGE User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Stehfest, E; De Waal, L; Oostenrijk, R.

    2010-09-15

    This user manual contains the basic information for running the simulation model IMAGE ('Integrated Model to Assess the Global Environment') of PBL. The motivation for this report was a substantial restructuring of the source code for IMAGE version 2.5. The document gives concise content information about the submodels, tells the user how to install the program, describes the directory structure of the run environment, shows how scenarios have to be prepared and run, and gives insight in the restart functionality.

  16. IAEA safeguards technical manual

    International Nuclear Information System (INIS)

    1982-03-01

    Part F of the Safeguards Technical Manual is being issued in three volumes. Volume 1 was published in 1977 and revised slightly in 1979. Volume 1 discusses basic probability concepts, statistical inference, models and measurement errors, estimation of measurement variances, and calibration. These topics of general interest in a number of application areas, are presented with examples drawn from nuclear materials safeguards. The final two chapters in Volume 1 deal with problem areas unique to safeguards: calculating the variance of MUF and of D respectively. Volume 2 continues where Volume 1 left off with a presentation of topics of specific interest to Agency safeguards. These topics include inspection planning from a design and effectiveness evaluation viewpoint, on-facility site inspection activities, variables data analysis as applied to inspection data, preparation of inspection reports with respect to statistical aspects of the inspection, and the distribution of inspection samples to more than one analytical laboratory. Volume 3 covers generally the same material as Volumes 1 and 2 but with much greater unity and cohesiveness. Further, the cook-book style of the previous two volumes has been replaced by one that makes use of equations and formulas as opposed to computational steps, and that also provides the bases for the statistical procedures discussed. Hopefully, this will help minimize the frequency of misapplications of the techniques

  17. Impact of a manualized multifocal perinatal home-visiting program using psychologists on postnatal depression: the CAPEDP randomized controlled trial.

    Directory of Open Access Journals (Sweden)

    Romain Dugravier

    Full Text Available Postnatal maternal depression (PND is a significant risk factor for infant mental health. Although often targeted alongside other factors in perinatal home-visiting programs with vulnerable families, little impact on PND has been observed.This study evaluates the impact on PND symptomatology of a multifocal perinatal home-visiting intervention using psychologists in a sample of women presenting risk factors associated with infant mental health difficulties.440 primiparous women were recruited at their seventh month of pregnancy. All were future first-time mothers, under 26, with at least one of three additional psychosocial risk factors: low educational level, low income, or planning to raise the child without the father. The intervention consisted of intensive multifocal home visits through to the child's second birthday. The control group received care as usual. PND symptomatology was assessed at baseline and three months after birth using the Edinburgh Postnatal Depression Scale (EPDS.At three months postpartum, mean (SD EPDS scores were 9.4 (5.4 for the control group and 8.6 (5.4 for the intervention group (p = 0.18. The difference between the mean EPDS scores was 0.85 (95% CI: 0.35; 1.34. The intervention group had significantly lower EPDS scores than controls in certain subgroups: women with few depressive symptoms at inclusion (EPDS <8: difference = 1.66 (95%CI: 0.17; 3.15, p = 0.05, adjusted for baseline EPDS score, women who were planning to raise the child with the child's father: difference = 1.45 (95%CI: 0.27; 2.62, p = 0.04 (adjusted; women with a higher educational level: difference = 1.59 (95%CI: 0.50; 2.68 p = 0.05 (adjusted.CAPEDP failed to demonstrate an overall impact on PND. However, post-hoc analysis reveals the intervention was effective in terms of primary prevention and in subgroups of women without certain risk factors. Effective overall reduction of PND symptomatology for young, first-time mothers presenting additional

  18. North America: Chapter 5

    Science.gov (United States)

    Schwartz, Mark D.; Beaubien, Elisabeth G.; Crimmins, Theresa M.; Weltzin, Jake F.; Edited by Schwartz, Mark D.

    2013-01-01

    Plant phenological observations and networks in North America have been largely local and regional in extent until recent decades. In the USA, cloned plant monitoring networks were the exception to this pattern, with data collection spanning the late 1950s until approximately the early 1990s. Animal observation networks, especially for birds have been more extensive. The USA National Phenology Network (USA-NPN), established in the mid-2000s is a recent effort to operate a comprehensive national-scale network in the United States. In Canada, PlantWatch, as part of Nature Watch, is the current national-scale plant phenology program.

  19. RAMONA-4B a computer code with three-dimensional neutron kinetics for BWR and SBWR system transient - user's manual

    International Nuclear Information System (INIS)

    Rohatgi, U.S.; Cheng, H.S.; Khan, H.J.; Mallen, A.N.; Neymotin, L.Y.

    1998-03-01

    This document is the User's Manual for the Boiling Water Reactor (BWR), and Simplified Boiling Water Reactor (SBWR) systems transient code RAMONA-4B. The code uses a three-dimensional neutron-kinetics model coupled with a multichannel, nonequilibrium, drift-flux, phase-flow model of the thermal hydraulics of the reactor vessel. The code is designed to analyze a wide spectrum of BWR core and system transients. Chapter 1 gives an overview of the code's capabilities and limitations; Chapter 2 describes the code's structure, lists major subroutines, and discusses the computer requirements. Chapter 3 is on code, auxillary codes, and instructions for running RAMONA-4B on Sun SPARC and IBM Workstations. Chapter 4 contains component descriptions and detailed card-by-card input instructions. Chapter 5 provides samples of the tabulated output for the steady-state and transient calculations and discusses the plotting procedures for the steady-state and transient calculations. Three appendices contain important user and programmer information: lists of plot variables (Appendix A) listings of input deck for sample problem (Appendix B), and a description of the plotting program PAD (Appendix C). 24 refs., 18 figs., 11 tabs

  20. Nuclear medicine. 1 part. Manual

    International Nuclear Information System (INIS)

    Shlygina, O.E.; Borisenko, A.R.

    2006-01-01

    Current manual is urged to give wide-scale readers a submission on a key principles and methods of nuclear medicine, and it opportunities and restrictions in diagnostics and treatment of different diseases. Nuclear medicine is differing first of all by combination of diverse knowledge fields: special knowledge of a doctor, knowledge of physical processes bases, related with radiation, grounds of radiopharmaceutics, dosimetry. In the base of the book the 5th edition of 'Nuclear medicine' manual in 2 parts of German authors - Schicha, G.; Schober, O. is applied. In the book publishing the stuff of the Institute of Nuclear Physics of the National Nuclear Center of Republic of Kazakhstan has been worked. Modifications undergo practically all chapters: especially the second one, forth and sixth was enlarged. The 1 part of the book was published due to support of IAEA within the Technical cooperation project 'Implementation of Nuclear Medicine and Biophysics Center' (KAZ/6/007). The manual second part - devoted to applications of nuclear medicine methods for diagnostics and treatment - will be published in 2007

  1. Methane Hydrates: Chapter 8

    Science.gov (United States)

    Boswell, Ray; Yamamoto, Koji; Lee, Sung-Rock; Collett, Timothy S.; Kumar, Pushpendra; Dallimore, Scott

    2008-01-01

    Gas hydrate is a solid, naturally occurring substance consisting predominantly of methane gas and water. Recent scientific drilling programs in Japan, Canada, the United States, Korea and India have demonstrated that gas hydrate occurs broadly and in a variety of forms in shallow sediments of the outer continental shelves and in Arctic regions. Field, laboratory and numerical modelling studies conducted to date indicate that gas can be extracted from gas hydrates with existing production technologies, particularly for those deposits in which the gas hydrate exists as pore-filling grains at high saturation in sand-rich reservoirs. A series of regional resource assessments indicate that substantial volumes of gas hydrate likely exist in sand-rich deposits. Recent field programs in Japan, Canada and in the United States have demonstrated the technical viability of methane extraction from gas-hydrate-bearing sand reservoirs and have investigated a range of potential production scenarios. At present, basic reservoir depressurisation shows the greatest promise and can be conducted using primarily standard industry equipment and procedures. Depressurisation is expected to be the foundation of future production systems; additional processes, such as thermal stimulation, mechanical stimulation and chemical injection, will likely also be integrated as dictated by local geological and other conditions. An innovative carbon dioxide and methane swapping technology is also being studied as a method to produce gas from select gas hydrate deposits. In addition, substantial additional volumes of gas hydrate have been found in dense arrays of grain-displacing veins and nodules in fine-grained, clay-dominated sediments; however, to date, no field tests, and very limited numerical modelling, have been conducted with regard to the production potential of such accumulations. Work remains to further refine: (1) the marine resource volumes within potential accumulations that can be

  2. Effectiveness of a cognitive-behavioral therapy (CBT manualized program for clinically anxious children: study protocol of a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Jansen Mélou

    2012-03-01

    Full Text Available Abstract Background In the Netherlands, the prevalence of anxiety disorders is 20%; and children with anxiety are at increased risk for psychopathology throughout adulthood. Recently, a revised version of a cognitive behavioral therapy manualized program called 'Thinking + Doing = Daring' (TDD was developed for children between 8 and 12 years old with an anxiety disorder. The main aim of this project is to conduct a Randomized Controlled Trial (RCT to evaluate the effectiveness of TDD. Methods/Design The CBT program will be tested with a RCT with 120 clinically anxious children (8-12 years old referred to one of three mental health care agencies. Children will be randomly assigned to the experimental (N = 60, TDD or to the control condition (N = 60, treatment as usual. The primary outcome measure will be the child's anxiety symptoms level. Secondary outcome measures will be externalizing (e.g. aggression and internalizing problems (e.g. depression. Two potential mediators of change will be examined in the current study: therapeutic alliance and parenting. Mother and child in both the experimental and control condition will be surveyed at baseline, post treatment and after 6 and 12 months (follow-up. It is hypothesized that children in the experimental condition will show a stronger decrease in anxiety symptoms compared to children that receive treatment as usual. Moreover, we expect that a strong therapeutic alliance and decreases in parental control and rejection will contribute to treatment success. Discussion Early treatment for anxiety problems has the potential to not only result in anxiety reductions, but also to prevent future problems such as substance abuse and psychopathology throughout adulthood. Our results will be immediately relevant to practice, since we are partnering with 'real world' community agencies. If the CBT program proves more effective than treatment as usual, it could be implemented in community mental health care

  3. Groundwater sampling: Chapter 5

    Science.gov (United States)

    Wang, Qingren; Munoz-Carpena, Rafael; Foster, Adam; Migliaccio, Kati W.; Li, Yuncong; Migliaccio, Kati

    2011-01-01

    About the book: As water quality becomes a leading concern for people and ecosystems worldwide, it must be properly assessed in order to protect water resources for current and future generations. Water Quality Concepts, Sampling, and Analyses supplies practical information for planning, conducting, or evaluating water quality monitoring programs. It presents the latest information and methodologies for water quality policy, regulation, monitoring, field measurement, laboratory analysis, and data analysis. The book addresses water quality issues, water quality regulatory development, monitoring and sampling techniques, best management practices, and laboratory methods related to the water quality of surface and ground waters. It also discusses basic concepts of water chemistry and hydrology related to water sampling and analysis; instrumentation; water quality data analysis; and evaluation and reporting results.

  4. SYVAC3 manual

    International Nuclear Information System (INIS)

    Andres, T.H.

    2000-01-01

    SYVAC3 (Systems Variability Analysis Code, generation 3) is a computer program that implements a method called systems variability analysis to analyze the behaviour of a system in the presence of uncertainty. This method is based on simulating the system many times to determine the variation in behaviour it can exhibit. SYVAC3 specializes in systems representing the transport of contaminants, and has several features to simplify the modelling of such systems. It provides a general tool for estimating environmental impacts from the dispersal of contaminants. This report describes the use and structure of SYVAC3. It is intended for modellers, programmers, operators and reviewers who deal with simulation codes based on SYVAC3. From this manual they can learn how to link a model with SYVAC3, how to set up an input file, and how to extract results from output files. The manual lists the subroutines of SYVAC3 that are available for use by models, and describes their argument lists. It also gives an overview of how routines in the File Reading Package, the Parameter Sampling Package and the Time Series Package can be used by programs outside of SYVAC3. (author)

  5. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD`s Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases & Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  6. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD's Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  7. SYVAC3 manual

    Energy Technology Data Exchange (ETDEWEB)

    Andres, T.H

    2000-07-01

    SYVAC3 (Systems Variability Analysis Code, generation 3) is a computer program that implements a method called systems variability analysis to analyze the behaviour of a system in the presence of uncertainty. This method is based on simulating the system many times to determine the variation in behaviour it can exhibit. SYVAC3 specializes in systems representing the transport of contaminants, and has several features to simplify the modelling of such systems. It provides a general tool for estimating environmental impacts from the dispersal of contaminants. This report describes the use and structure of SYVAC3. It is intended for modellers, programmers, operators and reviewers who deal with simulation codes based on SYVAC3. From this manual they can learn how to link a model with SYVAC3, how to set up an input file, and how to extract results from output files. The manual lists the subroutines of SYVAC3 that are available for use by models, and describes their argument lists. It also gives an overview of how routines in the File Reading Package, the Parameter Sampling Package and the Time Series Package can be used by programs outside of SYVAC3. (author)

  8. Davis PV plant operation and maintenance manual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    This operation and maintenance manual contains the information necessary to run the Photovoltaics for Utility Scale Applications (PVUSA) test facility in Davis, California. References to more specific information available in drawings, data sheets, files, or vendor manuals are included. The PVUSA is a national cooperative research and demonstration program formed in 1987 to assess the potential of utility scale photovoltaic systems.

  9. REFLA-1D/MODE 1: a computer program for reflood thermo-hydrodynamic analysis during PWR-LOCA user's manual

    International Nuclear Information System (INIS)

    Murao, Yoshio; Sugimoto, Jun; Okubo, Tsutomu

    1981-01-01

    This manual describes the REFLA-1D/MODE 1 reflood system analysis code. This code can solve the core thermo-hydrodynamics under forced flooding conditions and gravity feed conditions in a system similar to FLECHT-SET phase A. This manual describes the REFLA-1D/MODE 1 models and provides application information required to utilize REFLA-1D/MODE 1. (author)

  10. TRANSWRAP II: problem definition manual

    International Nuclear Information System (INIS)

    Knittle, D.E.

    1981-02-01

    The TRANSWRAP II computer code, written in Fortran IV and described in this Problem Definition Manual, was developed to analytically predict the magnitude of pressure pulses of large scale sodium-wate reactions in LMFBR secondary systems. It is currently being used for the Clinch River Breeder Reactor Program. The code provides the options, flexibility and features necessary to consider any system configuration. The code methodology has been validated with the aid of extensive sodium-water reaction test programs

  11. S.P.S.S. User's Manual #1-#4. Basic Program Construction in S.P.S.S.; S.P.S.S. Non-Procedural Statements and Procedural Commands; System Control Language and S.P.S.S.; Quick File Equate Statement Reference.

    Science.gov (United States)

    Earl, Lorna L.

    This series of manuals describing and illustrating the Statistical Package for the Social Sciences (SPSS) was planned as a self-teaching instrument, beginning with the basics and progressing to an advanced level. Information on what the searcher must know to define the data and write a program for preliminary analysis is contained in manual 1,…

  12. Plant Biotech Lab Manual.

    Science.gov (United States)

    Tant, Carl

    This book provides laboratory experiments to enhance any food science/botany curriculum. Chapter 1, "Introduction," presents a survey of the techniques used in plant biotechnology laboratory procedures. Chapter 2, "Micronutrition," discusses media and nutritional requirements for tissue culture studies. Chapter 3, "Sterile Seeds," focuses on the…

  13. The Wheeling and Transmission Manual, Second Edition

    International Nuclear Information System (INIS)

    Weiss, L.; Spiewak, S.

    1991-01-01

    The Wheeling and Transmission Manual addresses the key issues involved in the debate: the need for coordination, the extent to which access should be permitted, various pricing methodologies which might be employed, obstacles to the addition of new transmission capacity, and contractual matters which should be considered in negotiations between the parties. As one shall see, these matters are all interrelated and the resolution of any of them may affect the outcome of the others. The Manual is designed to give an overview of the issues involved. It is not intended exclusively for the expert engineer or attorney, although both might benefit from it. Rather, the Manual was written with the objective of providing decisionmakers and policymakers with detailed, timely and understandable materials to evaluate the specific circumstances affecting their companies. Each chapter of the book is indexed separately

  14. Fundamentals of Dosimetry. Chapter 3

    Energy Technology Data Exchange (ETDEWEB)

    Yoshimura, E. M. [Universidade de São Paulo, São Paulo (Brazil)

    2014-09-15

    Determination of the energy imparted to matter by radiation is the subject of dosimetry. The energy deposited as radiation interacts with atoms of the material, as seen in the previous chapter. The imparted energy is responsible for the effects that radiation causes in matter, for instance, a rise in temperature, or chemical or physical changes in the material properties. Several of the changes produced in matter by radiation are proportional to the absorbed dose, giving rise to the possibility of using the material as the sensitive part of a dosimeter. Also, the biological effects of radiation depend on the absorbed dose. A set of quantities related to the radiation field is also defined within the scope of dosimetry. It will be shown in this chapter that, under special conditions, there are simple relations between dosimetric and field description quantities. Thus, the framework of dosimetry is the set of physical and operational quantities that are studied in this chapter.

  15. RADTRAN 4: Volume 4, Programmer's manual

    International Nuclear Information System (INIS)

    Kanipe, F.L.; Neuhauser, K.S.

    1992-07-01

    The RADTRAN 4 computer code is designed to analyze radiological consequences and accident risks of transporting radioactive material. This manual provides information useful for interpreting, troubleshooting, or debugging components of the code during development or revision of the program

  16. Ziptrack manual

    International Nuclear Information System (INIS)

    Ito, A.; Bosworth, W.; Rutherford, J.; Lynch, A.; Tung, L.; Yang, W.

    1983-07-01

    A phenolic cart holding 3 mutually perpendicular search coils is moved through an luminum beam into the magnetic field. Coil voltages re integrated and digitized through a Data Translation 1712 ADC. The cart is controlled and the data is processed by an on-line PDP-11/05 computer. The results are displayed on a Tektronix 4010 terminal, stored on 9 track, 800 bpi tapes, and optionally recorded on a hard copy. Software on a floppy disk controls the system. The position of the cart is located by an encoder and is checked along the beam line by optical switches. One encoder count equals 0.01945 in.. The X and Y positions are changed by manipulators at each end of the beam. 625 horizontal or 500 vertical counts equal 1 in.. The desired field mapping can be automatically set up by programming a grid of encoder counts on the ''SHOW STATUS'' chart. A ziptrack command summary is given. Following that is a typical procedure for ziptrack operations. Also attached are time constants for the integrators and coil calibrations for 30 ft. and 100 ft. long cables

  17. Waste characterization data manual for the inactive liquid low-level waste tank systems at Oak Ridge National Laboratory, Oak Ridge, Tennessee. Environmental Restoration Program

    Energy Technology Data Exchange (ETDEWEB)

    1992-06-01

    This Waste Characterization Data Manual contains the results of an analysis of the contents of liquid low-level waste (LLLW) tanks that have been removed from service in accordance with the requirements of the Oak Ridge Reservation (ORR) Federal Facility Agreement (FFA), Sect. IX.G.1. This manual contains the results of sampling activities that were conducted at the Oak Ridge National Laboratory in 1988. Thirty-three tanks were sampled and analyzed at that time. Sampling of the remaining inactive tanks is currently underway, and data from these tanks will be added to this manual as they become available. Data are presented from analysis of volatile organic compounds, semivolatile organic compounds, polychlorinated biphenyls, radiochemical compounds, and inorganic compounds.

  18. Basic Radiation Detectors. Chapter 6

    Energy Technology Data Exchange (ETDEWEB)

    Van Eijk, C. W.E. [Faculty of Applied Sciences, Delft University of Technology, Delft (Netherlands)

    2014-12-15

    Radiation detectors are of paramount importance in nuclear medicine. The detectors provide a wide range of information including the radiation dose of a laboratory worker and the positron emission tomography (PET) image of a patient. Consequently, detectors with strongly differing specifications are used. In this chapter, general aspects of detectors are discussed.

  19. Quantitative Nuclear Medicine. Chapter 17

    Energy Technology Data Exchange (ETDEWEB)

    Ouyang, J.; El Fakhri, G. [Massachusetts General Hospital and Harvard Medical School, Boston (United States)

    2014-12-15

    Planar imaging is still used in clinical practice although tomographic imaging (single photon emission computed tomography (SPECT) and positron emission tomography (PET)) is becoming more established. In this chapter, quantitative methods for both imaging techniques are presented. Planar imaging is limited to single photon. For both SPECT and PET, the focus is on the quantitative methods that can be applied to reconstructed images.

  20. Chapter 3: Traceability and uncertainty

    International Nuclear Information System (INIS)

    McEwen, Malcolm

    2014-01-01

    Chapter 3 presents: an introduction; Traceability (measurement standard, role of the Bureau International des Poids et Mesures, Secondary Standards Laboratories, documentary standards and traceability as process review); Uncertainty (Example 1 - Measurement, M raw (SSD), Example 2 - Calibration data, N D.w 60 Co, kQ, Example 3 - Correction factor, P TP ) and Conclusion

  1. Behavioral service substitution (Chapter 9)

    NARCIS (Netherlands)

    Stahl, C.; Aalst, van der W.M.P.; Bouguettaya, A.; Sheng, Q.Z.; Daniel, F.

    2014-01-01

    Service-oriented design supports system evolution and encourages reuse and modularization. A key ingredient of service orientation is the ability to substitute one service by another without reconfiguring the overall system. This chapter aims to give an overview of the state of the art and open

  2. Energy and wastes. Chapter 1

    International Nuclear Information System (INIS)

    2002-01-01

    In the Chapter 1 'Energy and wastes' it is shown the wastes generation inevitability at power production, because there are no absolutely wasteless technologies. After energy production technologies analysis the data that nuclear energy is most ecologically acceptable at maintenance related radiation safety measures

  3. Principles of mathematical economics II solutions manual, supplementary materials and supplementary exercises

    CERN Document Server

    Vali, Shapoor

    2015-01-01

    This manual provides solutions to approximately 500 problems appeared in various chapters of the text Principles of Mathematical Economics. In some cases, a detailed solution with the additional discussion is provided. At the end of each chapter, new sets of exercises are given.

  4. Ship's Serviceman Laundry Handbook: Rate Training Manual and Non-Resident Career Course.

    Science.gov (United States)

    Naval Education and Training Command, Pensacola, FL.

    The manual and course form a self study package that enables laundrymen to fulfill the requirements of the Ship's Serviceman (Laundry) rating. Chapter 1 provides information regarding the administration of ship's service activities (equipment maintenance, supervisory responsibilities, and procurement of supplies). Chapters 2 through 12 cover the…

  5. Technical Report and Data File User's Manual for the 1992 National Adult Literacy Survey.

    Science.gov (United States)

    Kirsch, Irwin; Yamamoto, Kentaro; Norris, Norma; Rock, Donald; Jungeblut, Ann; O'Reilly, Patricia; Berlin, Martha; Mohadjer, Leyla; Waksberg, Joseph; Goksel, Huseyin; Burke, John; Rieger, Susan; Green, James; Klein, Merle; Campbell, Anne; Jenkins, Lynn; Kolstad, Andrew; Mosenthal, Peter; Baldi, Stephane

    Chapter 1 of this report and user's manual describes design and implementation of the 1992 National Adult Literacy Survey (NALS). Chapter 2 reviews stages of sampling for national and state survey components; presents weighted and unweighted response rates for the household component; and describes non-incentive and prison sample designs. Chapter…

  6. CALENDF-2010: user manual

    International Nuclear Information System (INIS)

    Sublet, Jean-Christophe; Ribon, Pierre; Coste-Delclaux, Mireille

    2011-09-01

    CALENDF-2010 represents a Fortran-95 update of the 1994, 2001 then 2005 code distribution with emphasise on programming quality and standards, physics and usage improvements. Devised to process multigroup cross-sections it relies on Gauss quadrature mathematical principle and strength. The followings processes can be handled by the code: moment probability table and effective cross-section calculation; pointwise cross section, probability table and effective cross-section regrouping; probability table condensation; probability table mix for several isotopes; probability table interpolation; effective cross section based probability table calculations; probability table calculations from effective cross-sections; cross-section comparison, complete energy pointwise cross-section processing and thickness dependent averaged transmission sample calculation. The CALENDF user manual, after having listed all principal code functions, describes sequentially each of them and gives comments on their associated output streams. Installation procedures, test cases and running time platform comparisons are given in the appendix. (authors)

  7. 41 CFR 304-2.1 - What definitions apply to this chapter?

    Science.gov (United States)

    2010-07-01

    ... title, the Foreign Affairs Manual (FAM), and the Joint Travel Regulations (JTR) for transportation, food... to this chapter? 304-2.1 Section 304-2.1 Public Contracts and Property Management Federal Travel Regulation System PAYMENT OF TRAVEL EXPENSES FROM A NON-FEDERAL SOURCE EMPLOYEE'S ACCEPTANCE OF PAYMENT FROM...

  8. A Manual of Style.

    Science.gov (United States)

    Nebraska State Dept. of Education, Lincoln.

    This "Manual of Style" is offered as a guide to assist Nebraska State employees in producing quality written communications and in presenting a consistently professional image of government documents. The manual is not designed to be all-inclusive. Sections of the manual discuss formatting documents, memorandums, letters, mailing…

  9. Oregon Pupil Transportation Manual. Revised Regulations and Responsibilities.

    Science.gov (United States)

    Oregon State Dept. of Education, Salem.

    Designed for use by Oregon school bus drivers and administrators, this manual answers common questions about school bus transportation in Oregon, including those about the laws governing pupil transportation, the regulations governing pupil transportation administration, and the laws on school bus operation. A chapter of advisory materials covers…

  10. Practical Poultry Raising. Appropriate Technologies for Development. Manual M-11.

    Science.gov (United States)

    French, Kenneth M.

    This manual is designed to provide development workers with the information and tools needed to begin or to improve poultry production. Covered in the individual chapters are the following topics: the nature and scope of poultry production, assessment of local poultry selections, basic information about chickens, country chickens, poultry…

  11. The Russia Corporate Governance Manual : Part I. Corporate Governance Introduced

    OpenAIRE

    International Finance Corporation; U.S. Department of Commerce

    2004-01-01

    The Russia corporate governance manual has been divided into and is published in six parts: (i) corporate governance introduced; (ii) good board practices; (iii) shareholder rights; (iv) information disclosure and transparency; (v) special focus section; and (vi) annexes model corporate governance documents. The first four parts contain chapters that focus on core corporate governance issu...

  12. Gunner's Mate G 3 and 2; Rate Training Manual. Revised.

    Science.gov (United States)

    Naval Education and Training Command, Pensacola, FL.

    The rate training manual has been prepared for men of the regular Navy and of the Naval Reserve for the purpose of advancement to increase knowledge in the various aspects of the Gunner's Mate rating (G 3 and 2). Chapters 1 through 14 deal with the following topics: the requirements of the Gunner's Mate G Rating, explosives and pyrotechnics,…

  13. Generic communications index: User's manual

    International Nuclear Information System (INIS)

    Dean, R.S.; Steinbrecher, D.H.; Hennick, A.

    1987-12-01

    This report is a manual for providing information required to use a special computer program developed by the NRC for indexing generic communications. The program is written in a user-friendly menu driven form using dBASE III programming language. It facilitates use of the required dBASE III search and sort capabilities to access records in a database called Generic Communications Index. This index is made up of one record each for all bulletins, circulars, and information notices, including revisions and supplements, from 1971, when such documentation started, through 1986 (or to the latest update). The program is designed for use by anyone modestly acquainted with the general use of IBM-compatible personal computers. The manual contains both a brief overview and a detailed description of the program, as well as detailed instructions for getting started using the program on a personal computer with either a two-floppy disk or a hard disk system. Included at the end are a brief description of how to handle problems which might occur, and notes on the makeup of the program and database files for help in adding records of communications for future years

  14. Vegetation and acidification, Chapter 5

    Science.gov (United States)

    David R. DeWalle; James N. Kochenderfer; Mary Beth Adams; Gary W. Miller

    2006-01-01

    In this chapter, the impact of watershed acidification treatments on WS3 at the Fernow Experimental Forest (FEF) and at WS9 on vegetation is presented and summarized in a comprehensive way for the first time. WS7 is used as a vegetative reference basin for WS3, while untreated plots within WS9 are used as a vegetative reference for WS9. Bioindicators of acidification...

  15. Chapter 1. Traditional marketing revisited

    OpenAIRE

    Lambin, Jean-Jacques

    2013-01-01

    The objective of this chapter is to review the traditional marketing concept and to analyse its main ambiguities as presented in popular textbooks. The traditional marketing management model placing heavy emphasis of the marketing mix is in fact a supply-driven approach of the market, using the understanding of consumers’ needs to mould demand to the requirements of supply, instead of adapting supply to the expectations of demand. To clarify the true role of marketing, a distinction is made b...

  16. Instrumentation for Dosimetry. Chapter 21

    Energy Technology Data Exchange (ETDEWEB)

    Hourdakis, J. C. [Greek Atomic Energy Commission, Athens (Greece); Nowotny, R. [Medical University of Vienna, Vienna (Austria)

    2014-09-15

    Measurements of absorbed dose (or air kerma) are required in varying situations in diagnostic radiology. The radiation fields vary from plain, slit and even point projection geometry, and may be stationary or moving, including rotational. Owing to the use of low photon energies for these fields, it is important that dosimeters have a satisfactory energy response. In general, the requirements for dosimeter accuracy are less stringent than those in radiation therapy; however, the dose and dose rate measurements cover a large range. Patient dosimetry (see Chapter 22) is a primary responsibility of the medical physicist specializing in diagnostic radiology and is required by legislation in many countries. Dose data are also required in the optimization of examinations for image quality and dose. Radiation measurement is also critical for occupational and public exposure control (see Chapter 24). Dose measurements are essential in acceptance testing and quality control (see Chapter 19). Several types of dosimeter can be used, provided that they have a suitable energy response, but typically, ionization chambers of a few cubic centimetres in volume, or solid state detectors specifically designed for such measurements, are used. If dosimeters are used to make measurements during an examination, they must not interfere with the examination. These devices are also used for determination of the half value layer (HVL). Special types of ionization chamber are employed for computed tomography (CT), mammography and interventional radiology dosimetry.

  17. RAMONA-4B a computer code with three-dimensional neutron kinetics for BWR and SBWR system transient - user`s manual

    Energy Technology Data Exchange (ETDEWEB)

    Rohatgi, U.S.; Cheng, H.S.; Khan, H.J.; Mallen, A.N.; Neymotin, L.Y.

    1998-03-01

    This document is the User`s Manual for the Boiling Water Reactor (BWR), and Simplified Boiling Water Reactor (SBWR) systems transient code RAMONA-4B. The code uses a three-dimensional neutron-kinetics model coupled with a multichannel, nonequilibrium, drift-flux, phase-flow model of the thermal hydraulics of the reactor vessel. The code is designed to analyze a wide spectrum of BWR core and system transients. Chapter 1 gives an overview of the code`s capabilities and limitations; Chapter 2 describes the code`s structure, lists major subroutines, and discusses the computer requirements. Chapter 3 is on code, auxillary codes, and instructions for running RAMONA-4B on Sun SPARC and IBM Workstations. Chapter 4 contains component descriptions and detailed card-by-card input instructions. Chapter 5 provides samples of the tabulated output for the steady-state and transient calculations and discusses the plotting procedures for the steady-state and transient calculations. Three appendices contain important user and programmer information: lists of plot variables (Appendix A) listings of input deck for sample problem (Appendix B), and a description of the plotting program PAD (Appendix C). 24 refs., 18 figs., 11 tabs.

  18. Handbook of laboratory techniques; Manual de tecnicas de laboratorio

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The Nuclear Regulatory Authority in Argentina have laboratories of support to regulations functions on radiological and nuclear safety, safeguards and physical protection, that have a surface of 2950 m{sup 2} in the Ezeiza Atomic Center. The manual describes in seven chapters the different techniques developed and applied in the laboratories along four decades of existence. The chapter 1: Dedicated to the treatment of environmental samples, described the procedures associated with the different types of samples: deposits, waters, sediments, vegetables, milk, fish and diet. The chapter 2: Details 48 radiochemical techniques associated to the measurements of americium 241, carbon 16, strontium 90, iodine 129, plutonium, radium 226, radon, uranium, nickel and actinides. The chapter 3: Describes the measurements techniques of alpha and gamma spectrometry. The different techniques of biological and physical dosimetry are described in the chapters 5 and 6 respectively. The final chapter is dedicated the techniques of external and internal contamination. It s important to emphasize that this manual contains the standardized technologies that the Nuclear Regulatory Authority of Argentina submits regularly to international comparisons.

  19. Martin Marietta Paducah Gaseous Diffusion Plant comprehensive earthquake emergency management program

    International Nuclear Information System (INIS)

    1990-01-01

    Recognizing the value of a proactive, integrated approach to earthquake preparedness planning, Martin Marietta Energy Systems, Inc. initiated a contract in June 1989 with Murray State University, Murray, Kentucky, to develop a comprehensive earthquake management program for their Gaseous Diffusion Plant in Paducah, Kentucky. The overall purpose of the program is to mitigate the loss of life and property in the event of a major destructive earthquake. The program includes four distinct (yet integrated) components: an emergency management plan, with emphasis on the catastrophic earthquake; an Emergency Operations Center Duty Roster Manual; an Integrated Automated Emergency Management Information System (IAEMIS); and a series of five training program modules. The PLAN itself is comprised of four separate volumes: Volume I -- Chapters 1--3; Volume II -- Chapters 4--6, Volume III -- Chapter 7, and Volume IV -- 23 Appendices. The EOC Manual (which includes 15 mutual aid agreements) is designated as Chapter 7 in the PLAN and is a ''stand alone'' document numbered as Volume III. This document, Volume I, provides an introduction, summary and recommendations, and the emergency operations center direction and control

  20. Martin Marietta Paducah Gaseous Diffusion Plant comprehensive earthquake emergency management program

    International Nuclear Information System (INIS)

    1990-01-01

    Recognizing the value of a proactive, integrated approach to earthquake preparedness planning, Martin Marietta Energy Systems, Inc. initiated a contract in June 1989 with Murray State University, Murray, Kentucky, to develop a comprehensive earthquake management program for their Gaseous Diffusion Plant in Paducah, Kentucky (PGDP -- Subcontract No. 19P-JV649V). The overall purpose of the program is to mitigate the loss of life and property in the event of a major destructive earthquake. The program includes four distinct (yet integrated) components: an emergency management plan, with emphasis on the catastrophic earthquake; an Emergency Operations Center Duty Roster Manual; an Integrated Automated Emergency Management Information System (IAEMIS); and a series of five training program modules. The PLAN itself is comprised of four separate volumes: Volume I -- Chapters 1--3; Volume II -- Chapters 4--6, Volume III -- Chapter 7, and Volume IV -- 23 Appendices. The EOC Manual (which includes 15 mutual aid agreements) is designated as Chapter 7 in the PLAN and is a ''stand alone'' document numbered as Volume III. This document, Volume II, discusses methodology, engineering and environmental analyses, and operational procedures

  1. Martin Marietta Paducah Gaseous Diffusion Plant comprehensive earthquake emergency management program

    International Nuclear Information System (INIS)

    1990-01-01

    Recognizing the value of a proactive, integrated approach to earthquake preparedness planning, Martin Marietta Energy Systems, Inc, initiated a contract in June 1989 with Murray State University, Murray, Kentucky, to develop a comprehensive earthquake management program for their Gaseous Diffusion Plant in Paducah, Kentucky (PGDP--Subcontract No. 19P-JV649V). The overall purpose of the program is to mitigate the loss of life and property in the event of a major destructive earthquake. The program includes four distinct (yet integrated) components: (1) an emergency management plan, with emphasis on the catas trophic earthquake, (2) an Emergency Operations Center Duty Roster Manual, (3) an Integrated Automated Emergency Management Information System (IAEMIS), and (4) a series of five training program modules. The PLAN itself is comprised of four separate volumes: Volume I--Chapters 1--3; Volume II--Chapters 4--6, Volume III--Chapter 7, and Volume IV--23 Appendices. The EOC Manual (which includes 15 mutual aid agreements) is designated as Chapter 7 in the PLAN and is a ''stand alone'' document numbered as Volume III. This document, Volume IV contains the appendices to this report

  2. Martin Marietta Paducah Gaseous Diffusion Plant comprehensive earthquake emergency management program

    International Nuclear Information System (INIS)

    1990-01-01

    Recognizing the value of a proactive, integrated approach to earthquake preparedness planning, Martin Marietta Energy Systems, Inc. initiated a contract in June 1989 with Murray State University, Murray, Kentucky, to develop a comprehensive earthquake management program for their Gaseous Diffusion Plant in Paducah, Kentucky (PGDP -- Subcontract No. 19P-JV649V). The overall purpose of the program is to mitigate the loss of life and property in the event of a major destructive earthquake. The program includes four distinct (yet integrated) components: (1) an emergency management plan with emphasis on the catas trophic earthquake; (2) an Emergency Operations Center Duty Roster Manual; (3) an Integrated Automated Emergency Management Information System (IAEMIS); and (4) a series of five training program modules. The PLAN itself is comprised of four separate volumes: Volume I -- Chapters 1--3; Volume II -- Chapters 4--6; Volume III -- Chapter 7; and Volume IV -- 23 Appendices. The EOC Manual (which includes 15 mutual aid agreements) is designated as Chapter 7 in the PLAN and is this document numbered as Volume III

  3. Manually controlled neutron-activation system

    International Nuclear Information System (INIS)

    Johns, R.A.; Carothers, G.A.

    1982-01-01

    A manually controlled neutron activation system, the Manual Reactor Activation System, was designed and built and has been operating at one of the Savannah River Plant's production reactors. With this system, samples can be irradiated for up to 24 hours and pneumatically transferred to a shielded repository for decay until their activity is low enough for them to be handled at a radiobench. The Manual Reactor Activation System was built to provide neutron activation of solid waste forms for the Alternative Waste Forms Leach Testing Program. Neutron activation of the bulk sample prior to leaching permits sensitive multielement radiometric analyses of the leachates

  4. CSTEM User Manual

    Science.gov (United States)

    Hartle, M.; McKnight, R. L.

    2000-01-01

    This manual is a combination of a user manual, theory manual, and programmer manual. The reader is assumed to have some previous exposure to the finite element method. This manual is written with the idea that the CSTEM (Coupled Structural Thermal Electromagnetic-Computer Code) user needs to have a basic understanding of what the code is actually doing in order to properly use the code. For that reason, the underlying theory and methods used in the code are described to a basic level of detail. The manual gives an overview of the CSTEM code: how the code came into existence, a basic description of what the code does, and the order in which it happens (a flowchart). Appendices provide a listing and very brief description of every file used by the CSTEM code, including the type of file it is, what routine regularly accesses the file, and what routine opens the file, as well as special features included in CSTEM.

  5. Chapter 2. Radionuclides in the biosphere

    International Nuclear Information System (INIS)

    Toelgyessy, J.; Harangozo, M.

    2000-01-01

    This is a chapter of textbook of radioecology for university students. In this chapter authors deal with role of radionuclides in the biosphere. Chapter consists of next parts: (1) Natural radionuclides in biosphere; (2) Man-made radionuclides in the biosphere; (3) Ecologically important radionuclides; (4) Natural background; (5) Radiotoxicity and (6) Paths of transfer of radionuclides from the source to human

  6. Chemical Tracer Methods: Chapter 7

    Science.gov (United States)

    Healy, Richard W.

    2017-01-01

    Tracers have a wide variety of uses in hydrologic studies: providing quantitative or qualitative estimates of recharge, identifying sources of recharge, providing information on velocities and travel times of water movement, assessing the importance of preferential flow paths, providing information on hydrodynamic dispersion, and providing data for calibration of water flow and solute-transport models (Walker, 1998; Cook and Herczeg, 2000; Scanlon et al., 2002b). Tracers generally are ions, isotopes, or gases that move with water and that can be detected in the atmosphere, in surface waters, and in the subsurface. Heat also is transported by water; therefore, temperatures can be used to trace water movement. This chapter focuses on the use of chemical and isotopic tracers in the subsurface to estimate recharge. Tracer use in surface-water studies to determine groundwater discharge to streams is addressed in Chapter 4; the use of temperature as a tracer is described in Chapter 8.Following the nomenclature of Scanlon et al. (2002b), tracers are grouped into three categories: natural environmental tracers, historical tracers, and applied tracers. Natural environmental tracers are those that are transported to or created within the atmosphere under natural processes; these tracers are carried to the Earth’s surface as wet or dry atmospheric deposition. The most commonly used natural environmental tracer is chloride (Cl) (Allison and Hughes, 1978). Ocean water, through the process of evaporation, is the primary source of atmospheric Cl. Other tracers in this category include chlorine-36 (36Cl) and tritium (3H); these two isotopes are produced naturally in the Earth’s atmosphere; however, there are additional anthropogenic sources of them.

  7. X ray Production. Chapter 5

    Energy Technology Data Exchange (ETDEWEB)

    Nowotny, R. [Medical University of Vienna, Vienna (Austria)

    2014-09-15

    The differential absorption of X rays in tissues and organs, owing to their atomic composition, is the basis for the various imaging methods used in diagnostic radiology. The principles in the production of X rays have remained the same since their discovery. However, much refinement has gone into the design of X ray tubes to achieve the performance required for today’s radiological examinations. In this chapter, an outline of the principles of X ray production and a characterization of the radiation output of X ray tubes will be given. The basic processes producing X rays are dealt with in Section 1.4.

  8. Chapter 4: Agriculture and trade

    International Nuclear Information System (INIS)

    Gray, P.S.

    1991-01-01

    This chapter describes the responses of governments to the fallout, particularly with respect to the contamination of food and the effect of governmental decisions on agriculture and trade. To put the subsequent description of events in perspective, it is prefaced with a brief explanation of how permitted levels of radiation in food can be derived from radiation dose recommendations. Although much of this work was done after Chernobyl, it is one of several possible systematic calculation methods, a knowledge of which allows a better understanding of the limits adopted under the pressure of events. (orig.)

  9. Chapter 9. The landscape sector

    International Nuclear Information System (INIS)

    Larivaille, Pierrette

    1980-01-01

    The object of this work is to examine the interactions between the activities of the electric industry (generating, transmission and distribution) and the environment, whilst showing to what extent the facilities are likely to affect it adversely and describing the measures taken to lessen the detrimental effects. The chapter devoted to the 'landscape' includes a section covering the electricity generating facilities, and among these, the nuclear power stations. The studies carried out on the main units of insertion into the site are presented, particularly the landscaping involved in setting up a power station [fr

  10. Fourier Transform Methods. Chapter 4

    Science.gov (United States)

    Kaplan, Simon G.; Quijada, Manuel A.

    2015-01-01

    This chapter describes the use of Fourier transform spectrometers (FTS) for accurate spectrophotometry over a wide spectral range. After a brief exposition of the basic concepts of FTS operation, we discuss instrument designs and their advantages and disadvantages relative to dispersive spectrometers. We then examine how common sources of error in spectrophotometry manifest themselves when using an FTS and ways to reduce the magnitude of these errors. Examples are given of applications to both basic and derived spectrophotometric quantities. Finally, we give recommendations for choosing the right instrument for a specific application, and how to ensure the accuracy of the measurement results..

  11. Radiological Control Manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  12. EMSL Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Foster, Nancy S.

    2009-06-18

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  13. EMSL Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Foster, Nancy S.

    2009-03-25

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  14. Radiological Control Manual

    International Nuclear Information System (INIS)

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records

  15. HASL procedures manual

    International Nuclear Information System (INIS)

    Harley, J.H.

    1977-08-01

    Additions and corrections to the following sections of the HASL Procedures Manual are provided: General, Sampling, Field Measurements; General Analytical Chemistry, Chemical Procedures, Data Section, and Specifications

  16. PCs The Missing Manual

    CERN Document Server

    Karp, David

    2005-01-01

    Your vacuum comes with one. Even your blender comes with one. But your PC--something that costs a whole lot more and is likely to be used daily and for tasks of far greater importance and complexity--doesn't come with a printed manual. Thankfully, that's not a problem any longer: PCs: The Missing Manual explains everything you need to know about PCs, both inside and out, and how to keep them running smoothly and working the way you want them to work. A complete PC manual for both beginners and power users, PCs: The Missing Manual has something for everyone. PC novices will appreciate the una

  17. Chapter 2: Stand-alone Applications - TOPCAT

    Science.gov (United States)

    Miller, C. J.

    Tool for OPerations on Catalogues And Tables or TOPCAT is a graphical viewer for table data. It offers a variety of ways to work with data tables, including a browser for the cell data, viewers for information about table and column metadata, dataset visualization, and even analysis. We discuss a small subset of TOPCAT's functionalities in this chapter. TOPCAT was originally developed as part of the Starlink program in the United Kingdom. It is now maintained by AstroGrid. The program is written in pure Java and available under the GNU General Public License. It is available for download and a version is included in the software distribution accompanying this book. TOPCAT is a GUI interface on top of the STIL library. A command line interface to this library, STILTS, described in Chapter 21 provides scriptable access to many of the capabilities described here. The purpose of this tutorial is to provide an overview of TOPCAT to the novice user. The best place to look for and learn about TOPCAT is the web page maintained by Mark B. Taylor. There, TOPCAT documentation is provided in HTML, PDF, via screen shots, etc. In this chapter we take the user through a few examples that give the general idea of how TOPCAT works. The majority of the functionality of TOPCAT is not included in this short tutorial. Our goal in this tutorial is to lead the reader through an exercise that would result in a publication quality figure (e.g. for a journal article). Specifically, we will use TOPCAT to show how the color-magnitude relation of a galaxy cluster compares to that of all galaxies in the Sloan Digital Sky Survey (York et al. 2000). This diagnostic is used not only in cluster finding, but its linear fit can provide insight into the age and/or metallicity of the oldest galaxies in galaxy clusters (which are some of the oldest galaxies in the Universe). The data we need for this exercise are: 1) the entire spectroscopic galaxy catalog from the SDSS, with galaxy positions, galaxy

  18. Exploring Old Growth Forests: A Teacher's Manual.

    Science.gov (United States)

    Lemieux, Chris; Powers, Jennene; Quinby, Peter; Schultz, Caroline; Stabb, Mark

    "Exploring Old Growth Forests" is an Ontario (Canada) program that provides secondary students with hands-on experiences in old growth forests. Activity-based and student-centered, the program aims to develop student awareness of the importance of old growth forests and the need to conserve them. This manual provides teachers with…

  19. Training Manual for HIV/AIDS Prevention.

    Science.gov (United States)

    Epps, Patricia H.; Vallenari, Allison

    This manual includes all necessary information for implementing the Champs program, which trains older elementary school students or middle/high school students to operate puppets to deliver an HIV/AIDS message to kindergarten through sixth graders. Relying on a peer approach, the Program provides scripted, prerecorded lessons intended to reach…

  20. Occupational Safety and Health Curriculum Manual.

    Science.gov (United States)

    Gourley, Frank A., Jr., Comp.

    With the enactment of the Occupational Safety and Health Act of 1970, the need for manpower development in the field of industrial safety and hygiene has resulted in the development of a broad based program in Occupational Safety and Health. The manual provides information to administrators and instructors on a program of study in this field for…