WorldWideScience

Sample records for programming environment ieee

  1. Return of IEEE Std 627 and its Value to Equipment Qualification Programs

    International Nuclear Information System (INIS)

    Horvath, D.A.

    2012-01-01

    IEEE Std 627 ''Design Qualification of Safety Systems Equipment Used in Nuclear Power Generating Stations'' was issued to more generically establish qualification requirements in the form of a high level umbrella document. Efforts on this standard began in late 1975 at the request of the IEEE Nuclear Standards Management Board. In 1977 a joint ASME/IEEE agreement established responsibility for qualification and quality assurance standards preparation. ASME accepted responsibility for Quality Assurance and IEEE for qualification. In accordance with that agreement, IEEE completed the generic qualification standard in 1980. This document provided high level approaches, criteria, guidance, and principles for qualification of both electrical and mechanical equipment that at that time appeared in no other industry standard. IEEE Std 627-1980 was later reaffirmed in 1996. In 1986, ASME's Board on Nuclear Codes and Standards directed its Committee on Qualification of Mechanical Equipment (QME) to develop a standard for qualifying mechanical equipment. This task was completed in several parts during the time frame from 1992 to 1994. Partly in response to this activity, IEEE Std 627 was withdrawn in 2002. Later although withdrawn, it was found that IEEE Std 627 was continuing to be used and referenced by many entities both in the US and other countries including in ASME's QME-1-2002 ''Qualification of Active Mechanical Equipment Used in Nuclear Power Plants'', US NRC's NUREG-0800 Standard Review Plan Section 3.11, at least one reactor vendor's Design Certification Document (DCD), several international licensing documents, and elsewhere. As a result, in 2007, the IEEE Standards Board authorized Working Group 2.10 of Subcommittee 2 (Qualification) of the Power and Energy Society's Nuclear Power Engineering Committee to resurrect and update IEEE Std 627-1980 (Reaff 1996). The result was the culmination IEEE Std 627 in 2010. This paper will report on the eight improvements made

  2. Development of a low mobility IEEE 802.15.4 compliant VANET system for urban environments.

    Science.gov (United States)

    Nazabal, Juan Antonio; Falcone, Francisco; Fernández-Valdivielso, Carlos; Matías, Ignacio Raúl

    2013-05-29

    The use of Vehicular Ad-Hoc Networks (VANETs) is growing nowadays and it includes both roadside-to-vehicle communication (RVC) and inter-vehicle communication (IVC). The purpose of VANETs is to exchange useful information between vehicles and the roadside infrastructures for making an intelligent use of them. There are several possible applications for this technology like: emergency warning system for vehicles, cooperative adaptive cruise control or collision avoidance, among others. The objective of this work is to develop a VANET prototype system for urban environments using IEEE 802.15.4 compliant devices. Simulation-based values of the estimated signal strength and radio link quality values are obtained and compared with measurements in outdoor conditions to validate an implemented VANET system. The results confirm the possibility of implementing low cost vehicular communication networks operating at moderate vehicular speeds.

  3. Cross-layer TCP Performance Analysis in IEEE 802.11 Vehicular Environments

    Directory of Open Access Journals (Sweden)

    T. Janevski

    2014-06-01

    Full Text Available In this paper we provide a performance analysis of TCP in IEEE 802.11 vehicular environments for different well-known TCP versions, such as Tahoe, Reno, New Reno, Vegas, and Sack. The parameters of interest from the TCP side are the number of Duplicate Acknowledgements - DupAck, and the number of Delayed Acknowledgements - DelAck, while on the wireless network side the analyzed parameter is the interface queue - IFQ. We have made the analysis for the worst-case distance scenario for single-hop and worst-case multihop vehicular environments. The results show that the number of wireless hops in vehicular environments significantly reduces the TCP throughput. The best average performances considering all scenarios were obtained for TCP Vegas. However, the results show that the interface queue at wireless nodes should be at least five packets or more. On the other side, due to shorter distances in the vehicular wireless network, results show possible flexibility of using different values for the DupAck without degradation of the TCP throughput. On the other side, the introduction of the DelAck parameter provides enhancement in the average TCP throughput for all TCP versions.

  4. Implementation experiences of ISO/IEEE11073 standard applied to new use cases for e-health environments.

    Science.gov (United States)

    Martinez, I; Escayola, J; Martinez-Espronceda, M; Serrano, L; Trigo, J D; Led, S; Garcia, J

    2009-01-01

    Recent advances in biomedical engineering and continuous technological innovations in last decade are promoting new challenges, especially in e-Health environments. In this context, the medical devices interoperability is one of the interest fields wherein these improvements require a standard-based design in order to achieve homogeneous solutions. Furthermore, the spreading of wearable devices, oriented to the paradigm of patient environment and supported by wireless technologies as Bluetooth or ZigBee, is bringing new medical use cases based on Ambient Assisted Living, home monitoring of elderly, heart failure, chronic, under palliative care or patients who have undergone surgery, urgencies and emergencies, or even fitness auto-control and health follow-up. In this paper, several implementation experiences based on ISO/IEEE11073 standard are detailed. These evolved e-Health services can improve the quality of the patient's care, increase the user's interaction, and assure these e-Health applications to be fully compatible with global telemedicine systems.

  5. Accurate and Integrated Localization System for Indoor Environments Based on IEEE 802.11 Round-Trip Time Measurements

    Directory of Open Access Journals (Sweden)

    Alfonso Bahillo

    2010-01-01

    Full Text Available The presence of (Non line of Sight NLOS propagation paths has been considered the main drawback for localization schemes to estimate the position of a (Mobile User MU in an indoor environment. This paper presents a comprehensive wireless localization system based on (Round-Trip Time RTT measurements in an unmodified IEEE 802.11 wireless network. It overcomes the NLOS impairment by implementing the (Prior NLOS Measurements Correction PNMC technique. At first, the RTT measurements are performed with a novel electronic circuit avoiding the need for time synchronization between wireless nodes. At second, the distance between the MU and each reference device is estimated by using a simple linear regression function that best relates the RTT to the distance in (Line of Sight LOS. Assuming that LOS in an indoor environment is a simplification of reality hence, the PNMC technique is applied to correct the NLOS effect. At third, assuming known the position of the reference devices, a multilateration technique is implemented to obtain the MU position. Finally, the localization system coupled with measurements demonstrates that the system outperforms the conventional time-based indoor localization schemes without using any tracking technique such as Kalman filters or Bayesian methods.

  6. Indoor location system based on discriminant-adaptive neural network in IEEE 802.11 environments.

    Science.gov (United States)

    Fang, Shih-Hau; Lin, Tsung-Nan

    2008-11-01

    This brief paper presents a novel localization algorithm, named discriminant-adaptive neural network (DANN), which takes the received signal strength (RSS) from the access points (APs) as inputs to infer the client position in the wireless local area network (LAN) environment. We extract the useful information into discriminative components (DCs) for network learning. The nonlinear relationship between RSS and the position is then accurately constructed by incrementally inserting the DCs and recursively updating the weightings in the network until no further improvement is required. Our localization system is developed in a real-world wireless LAN WLAN environment, where the realistic RSS measurement is collected. We implement the traditional approaches on the same test bed, including weighted kappa-nearest neighbor (WKNN), maximum likelihood (ML), and multilayer perceptron (MLP), and compare the results. The experimental results indicate that the proposed algorithm is much higher in accuracy compared with other examined techniques. The improvement can be attributed to that only the useful information is efficiently extracted for positioning while the redundant information is regarded as noise and discarded. Finally, the analysis shows that our network intelligently accomplishes learning while the inserted DCs provide sufficient information.

  7. Multiprocessor programming environment

    Energy Technology Data Exchange (ETDEWEB)

    Smith, M.B.; Fornaro, R.

    1988-12-01

    Programming tools and techniques have been well developed for traditional uniprocessor computer systems. The focus of this research project is on the development of a programming environment for a high speed real time heterogeneous multiprocessor system, with special emphasis on languages and compilers. The new tools and techniques will allow a smooth transition for programmers with experience only on single processor systems.

  8. The Greenfoot Programming Environment

    Science.gov (United States)

    Kolling, Michael

    2010-01-01

    Greenfoot is an educational integrated development environment aimed at learning and teaching programming. It is aimed at a target audience of students from about 14 years old upwards, and is also suitable for college- and university-level education. Greenfoot combines graphical, interactive output with programming in Java, a standard, text-based…

  9. Indoor Environment Program

    International Nuclear Information System (INIS)

    Daisey, J.M.

    1993-06-01

    This paper reports progress during the year 1992 in the Indoor Environment Program in the Energy and Environment Division of Lawrence Berkeley Laboratory. Studies in the following areas are reported: energy performance and ventilation in buildings; physical and chemical characterization of indoor air pollutants; indoor radon; indoor air quality; exposure to indoor air pollutants and risk analysis. Pollutants of particular interest include: radon; volatile, semi-volatile and particulate organic compounds; and combustion emissions including environmental tobacco smoke, carbon monoxide, and nitrogen oxides

  10. Development and results of a test program to demonstrate compliance with IEEE STD 384 and R.G. 1.75 electrical separation requirements

    International Nuclear Information System (INIS)

    Eckert, G.P.; Heneberry, E.F.; Walker, F.P.; Konkus, J.F.

    1987-01-01

    The IEEE Std 384-1974, entitled ''Criteria for Separation of Class 1E Equipment and Circuits,'' contains criteria to ensure the independence of redundant Class 1E equipment when designing electrical systems in nuclear plants. The NRC, in R.G. 1.75 Rev. 2, 1978, endorses, with comments, IEEE-384, as the means of achieving independence. One method given in IEEE-384, is that of maintaining a specified separation between components; another method utilizes a combination of separation and barriers. The standard also allows alternative methods to be used when justified by test-based analyses. This paper is a report of a test program undertaken to provide a basis for analysis in the development of alternative methods of achieving separation. The test parameters developed and used, and the results obtained, should prove useful in determining alternative methods of complying with R.G. 1.75 requirements

  11. RIPE [robot independent programming environment]: A robot independent programming environment

    International Nuclear Information System (INIS)

    Miller, D.J.; Lennox, R.C.

    1990-01-01

    Remote manual operations in radiation environments are typically performed very slowly. Sensor-based computer-controlled robots hold great promise for increasing the speed and safety of remote operations; however, the programming of robotic systems has proven to be expensive and difficult. Generalized approaches to robot programming that reuse available software modules and employ programming languages which are independent of the specific robotic and sensory devices being used are needed to speed software development and increase overall system reliability. This paper discusses the robot independent programming environment (RIPE) developed at Sandia National Laboratories (SNL). The RIPE is an object-oriented approach to robot system architectures; it is a software environment that facilitates rapid design and implementation of complex robot systems for diverse applications. An architecture based on hierarchies of distributed multiprocessors provides the computing platform for a layered programming structure that models applications using software objects. These objects are designed to support model-based automated programming of robotic and machining devices, real-time sensor-based control, error handling, and robust communication

  12. The IEEE Milestone event at CERN

    CERN Multimedia

    2005-01-01

    On the initiative of its French and Swiss Sections, the IEEE has honoured CERN with an 'IEEE Milestone in the history of electricity and electronics' for the invention of the multi-wire proportional chamber in 1968. The IEEE established the Electrical Engineering Milestones programe in 1983 to honour significant achievements in the history of electrical and electronics engineering. To be designated, an achievement must be at least 25 years old, must have involved a unique solution to an engineering problem, and must have had at least regional impact. Currently there are more than  50 IEEE Milestones around the world. http://www.ieee.org/organizations/history_center/cern.html The installation and unveiling of this IEEE Milestone will provide the opportunity to emphasize the close relationship between science, technology, industry and well-being in society.  A ceremony, organised with the support of a group of IEEE members working at CERN, will be held at the CERN Globe of Science and Inn...

  13. DMA Modern Programming Environment Study.

    Science.gov (United States)

    1980-01-01

    capabilities. The centers are becoming increasingly dependent upon the computer and digital data in the fulfillment of MC&G goals. Successful application...ftticrcsrccessors C140 by Herbert AlteroDigital Citmmuncaticns C141 0 Structuredl Design ’-:orkshocr by Ned Chapin KC 156o Digital Systems En17lrceriirg CC 139 o3...on a programming environment. The study, which resulted in production of a paper entitled An EXEC 8 Programming Support Libary , contends that most of

  14. IEEE Smart Grid Series of Standards IEEE 2030 (Interoperability) and IEEE 1547 (Interconnection) Status: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Basso, T.; DeBlasio, R.

    2012-04-01

    The IEEE American National Standards smart grid publications and standards development projects IEEE 2030, which addresses smart grid interoperability, and IEEE 1547TM, which addresses distributed resources interconnection with the grid, have made substantial progress since 2009. The IEEE 2030TM and 1547 standards series focus on systems-level aspects and cover many of the technical integration issues involved in a mature smart grid. The status and highlights of these two IEEE series of standards, which are sponsored by IEEE Standards Coordinating Committee 21 (SCC21), are provided in this paper.

  15. IEEE International Symposium on Biomedical Imaging.

    Science.gov (United States)

    2017-01-01

    The IEEE International Symposium on Biomedical Imaging (ISBI) is a scientific conference dedicated to mathematical, algorithmic, and computational aspects of biological and biomedical imaging, across all scales of observation. It fosters knowledge transfer among different imaging communities and contributes to an integrative approach to biomedical imaging. ISBI is a joint initiative from the IEEE Signal Processing Society (SPS) and the IEEE Engineering in Medicine and Biology Society (EMBS). The 2018 meeting will include tutorials, and a scientific program composed of plenary talks, invited special sessions, challenges, as well as oral and poster presentations of peer-reviewed papers. High-quality papers are requested containing original contributions to the topics of interest including image formation and reconstruction, computational and statistical image processing and analysis, dynamic imaging, visualization, image quality assessment, and physical, biological, and statistical modeling. Accepted 4-page regular papers will be published in the symposium proceedings published by IEEE and included in IEEE Xplore. To encourage attendance by a broader audience of imaging scientists and offer additional presentation opportunities, ISBI 2018 will continue to have a second track featuring posters selected from 1-page abstract submissions without subsequent archival publication.

  16. IEEE Std 649-1991: IEEE standard for qualifying Class 1E motor control centers for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The basic principles, requirements, and methods for qualifying Class 1E motor control centers for both harsh and mild environment applications in nuclear power generating stations are described. In addition to defining specific qualification requirements for Class 1E motor control centers and their components in accordance with the more general qualification requirements of IEEE Std 323-1983, this standard is intended to provide guidance in establishing a qualification program for demonstrating the adequacy of Class 1E motor control centers in nuclear power generating station applications

  17. IEEE Prize for Lucio Rossi

    CERN Multimedia

    IEEE Council on Superconductivity

    2007-01-01

    Lucio Rossi receives his prize from John Spargo, Chairman of the IEEE Council on Superconductivity (left), and Martin Nisenoff, Chairman of the Council on Superconductivity's Awards Committee (right).

  18. IEEE guide for planning of pre-operational testing programs for class 1E power systems for nuclear-power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    The Institute of Electrical and Electronics Engineers (IEEE) guide for pre-operational testing of Class 1E power systems for nuclear-power generating stations is presented. The guidelines apply to power systems both ac and dc supplies but not to the equipment which utilizes the ac and dc power. The pre-operational tests are performed after appropriate construction tests

  19. Access to IEEE Electronic Library

    CERN Multimedia

    2007-01-01

    From 2007, the CERN Library now offers readers online access to the complete IEEE Electronic Library (Institute of Electrical and Electronics Engineers). This new licence gives unlimited online access to all IEEE and IET (previously IEE) journals and proceedings as well as all current IEEE standards and selected archived ones. Some of the titles offer volumes back to 1913. This service currently represents more than 1,400,000 full-text articles! This leading engineering information resource replaces the previous service, a sub-product of the IEEE database called 'IEEE Enterprise', which offered online access to the complete collection of IEEE journals and proceedings, but with limited features. The service had become so popular that the CERN Working Group for Acquisitions recommended that the Library subscribe to the complete IEEE Electronic Library for 2007. Usage statistics for recent months showed there was a demand for the service from a large community of CERN users and we were aware that many users h...

  20. Programming in an object-oriented environment

    CERN Document Server

    Ege, Raimund K

    1992-01-01

    Programming in an Object-Oriented Environment provides an in-depth look at the concepts behind the technology of object-oriented programming.This book explains why object-oriented programming has the potential to vastly improve the productivity of programmers and how to apply this technology in a practical environment. Many programming examples are included, focusing on how different programming languages support the core of object-oriented concepts. C++ is used as the main sample language throughout this text.This monograph consists of two major parts. Part I provides an introduction to objec

  1. PYGMALION: A Creative Programming Environment

    Science.gov (United States)

    1975-06-01

    iiiiiimimmmimm wm^m^mmm’ wi-i ,»■»’■’.■- v* 26 Examples of Purely Iconic Reasoning 1-H Pythagoras ’ original proof of the Pythagorean Theorem ... Theorem Proving Machine񓟋. His program employed properties of the representation to guide the proof of theorems . His simple heruristic "Reject...one theorem the square of the hypotenuse. "Every proposition is presented as a self-contained fact relying on its own intrinsic evidence. Instead

  2. The Scratch Programming Language and Environment

    Science.gov (United States)

    Maloney, John; Resnick, Mitchel; Rusk, Natalie; Silverman, Brian; Eastmond, Evelyn

    2010-01-01

    Scratch is a visual programming environment that allows users (primarily ages 8 to 16) to learn computer programming while working on personally meaningful projects such as animated stories and games. A key design goal of Scratch is to support self-directed learning through tinkering and collaboration with peers. This article explores how the…

  3. Nuclear power program and environment

    International Nuclear Information System (INIS)

    Subramanya, S.K.; Gupta, J.P.

    2012-01-01

    Access to energy is one of the basic requirements for human development. To meet these growing energy needs without creating negative side effects is a challenge. The possibility of global climate change resulting from an increase in GHG concentrations in the atmosphere due to developmental activities is a major global concern. India is passing through the process of economic growth. Although India has not created the problem of climate change, India stands ready to be a part of the solution. The largest chunk of emissions was from electricity generation amounting to 65 percent of the total CO 2 equivalent emissions from the energy sector. Nuclear energy and renewables stand as sources for electricity with minimum GHG emission. Production of electricity from any form of primary energy has some environmental effect. A balanced assessment is needed. Nuclear power is of importance to India because it has potentially unlimited resource base, does not emit GHGs and, depending on location, has potentially favourable economics versus coal. In the long term, if we are to preserve the environment, it will be necessary to tap this source to the maximum extent feasible, In nuclear power stations, all its wastes are contained. India being home to nearly a third of the entire world's thorium, the strategies for large scale deployment of nuclear energy is focused towards utilization of thorium. The electricity potential of 3-stage programme is estimated to be about 2 lakh GWe-yr. Nuclear Power Corporation of India Limited is currently operating 20 reactors and has accumulated more than 337 reactor-years of experience in safe operation. A defence-in-depth approach is at the heart of safety philosophy, where there are several lines of defence, one backing another. Radiation is relevant for nuclear, coal, oil, gas and geothermal power plants. The essential task is to prevent excessive amounts now or in the future. One of the guiding principles adopted is to ensure that radiation

  4. Orchestration in work environment policy programs

    DEFF Research Database (Denmark)

    Hasle, Peter; Limborg, Hans Jørgen; Grøn, Sisse

    2017-01-01

    In spite of many years’ efforts, it is difficult to prove substantial improvements of the work environment and policymakers are continuously searching for new efficient strategies. This paper examines the concept of orchestration of work environment programs, based on an empirical analysis...... of recent Danish policy. Orchestration is a strategy where different stakeholders and activities are integrated into a unified program aimed at a specific target group. The analysis includes three policy cases, supplemented with two company case studies. The research shows a move toward a more governance...... type of regulation, which is not only emerging in network but also includes more explicitly orchestrated policy programs. The stakeholders participate in the network with different interests and the orchestration of work environment policies is therefore built on a platform of regulation...

  5. Sandia Laboratories environment and safety programs

    International Nuclear Information System (INIS)

    Zak, B.D.; McGrath, P.E.; Trauth, C.A. Jr.

    1975-01-01

    Sandia, one of ERDA's largest laboratories, is primarily known for its extensive work in the nuclear weapons field. In recent years, however, Sandia's role has expanded to embrace sizeable programs in the energy, resource recovery, and the environment and safety fields. In this latter area, Sandia has programs which address nuclear, fossil fuel, and general environment and safety issues. Here we survey ongoing activities and describe in more detail aa few projects of particular interest. These range from a study of the impact of sealed disposal of radioactive wastes, through reactor safety and fossil fuel plume chemistry, to investigations of the composition and dynamics of the stratosphere

  6. IEEE Conference Publications in Libraries.

    Science.gov (United States)

    Johnson, Karl E.

    1984-01-01

    Conclusions of surveys (63 libraries, OCLC database, University of Rhode Island users) assessing handling of Institute of Electrical and Electronics Engineers (IEEE) conference publications indicate that most libraries fully catalog these publications using LC cataloging, and library patrons frequently require series access to publications. Eight…

  7. Researching the roots of IEEE Region 8

    NARCIS (Netherlands)

    Bastiaans, M.J.

    2013-01-01

    This paper describes the preliminary steps towards the foundation and the early history of IRE Region 9 / IEEE Region 8. The information has been gathered mainly from the archives of the IEEE Benelux Section.

  8. 2012 IEEE Vehicular Networking Conference (VNC)

    NARCIS (Netherlands)

    Altintas, Onur; Chen, Wai; Heijenk, Geert; Oh, Hyun Seo; Chung, Jong-Moon; Dressler, Falko; Kargl, Frank; Pau, Giovanni; Schoch, Elmar

    2012-01-01

    On behalf of the Organizing Committee, we would like to welcome you to the fourth edition of the IEEE Vehicular Networking Conference in Seoul, Korea. IEEE VNC is a unique conference sponsored by both IEEE Communications Society and Intelligent Transportation Systems Society. It brings together

  9. Indoor environment program: FY 1988 annual report

    International Nuclear Information System (INIS)

    1989-03-01

    The Indoor Environment Program examines the scientific issues associated with the design and operation of buildings to optimize energy performance and occupant comfort and health. Optimizing occupant health and comfort is addressed in various ways by groups within the Program. To examine energy flow through all elements of the building shell, the Energy Performance of Buildings Group measures air infiltration rates, studies thermal characteristics of structural elements, and develops simplified models of the behavior of complete buildings. Potential savings in the infiltration area are great

  10. IEEE Prize for Lucio Rossi

    CERN Multimedia

    2007-01-01

    Lucio Rossi receives his prize from John Spargo, Chairman of the IEEE Council on Superconductivity (left), and Martin Nisenoff, Chairman of the Council on Superconductivity’s Awards Committee (right). (Photo: IEEE Council on Superconductivity)With the magnets installed in the tunnel and work on the interconnections almost completed, Lucio Rossi has reaped the rewards of fifteen years of work. And yet, when the physicist from Milan arrived to take charge of the group responsible for the superconducting magnets in 2001, success seemed far from assured. Endowed with surprising levels of energy, Lucio Rossi, together with his team, ensured that production of these highly complex magnets got underway. Today, that achievement earns them the recognition not only of CERN but also of the international superconducting community. It is for this achievement that Lucio Rossi was awarded the prize by the IEEE’s (Institute of Electrical an...

  11. ARC Researchers at IEEE 2015 Vehicle Power and Propulsion Conference

    Science.gov (United States)

    Contacts Researchers News & Events Event Calendar Annual Program Review Research Seminars Press Room Event Archives ARC Researchers at the IEEE 2015 Vehicle Power and Propulsion Conference (October 19-22 Ballroom B P-SS4-2 Comparison of SOFC and PEM Fuel Cell Hybrid Power Management Strategies for Mobile

  12. 2011 IEEE Vehicular Networking Conference (VNC): Demo Summaries

    NARCIS (Netherlands)

    Altintas, O.; Chen, W.; Heijenk, Geert; Dressler, F.; Ekici, E.; Kargl, Frank; Shigeno, H.; Dietzel, Stefan

    2011-01-01

    Foreword For the first time in its history, IEEE VNC has included this year’s demonstrations in its program. Demonstrations play an important role to expose the research community to practical aspects of research and to foster cross-fertilization among researchers both in academia and in industry.

  13. Robot Task Commander with Extensible Programming Environment

    Science.gov (United States)

    Hart, Stephen W (Inventor); Yamokoski, John D. (Inventor); Wightman, Brian J (Inventor); Dinh, Duy Paul (Inventor); Gooding, Dustin R (Inventor)

    2014-01-01

    A system for developing distributed robot application-level software includes a robot having an associated control module which controls motion of the robot in response to a commanded task, and a robot task commander (RTC) in networked communication with the control module over a network transport layer (NTL). The RTC includes a script engine(s) and a GUI, with a processor and a centralized library of library blocks constructed from an interpretive computer programming code and having input and output connections. The GUI provides access to a Visual Programming Language (VPL) environment and a text editor. In executing a method, the VPL is opened, a task for the robot is built from the code library blocks, and data is assigned to input and output connections identifying input and output data for each block. A task sequence(s) is sent to the control module(s) over the NTL to command execution of the task.

  14. Indoor Environment Program - 1996 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Indoor Environment Program

    1996-11-01

    The forty-five chemists, physicists, biologists, architects, engineers, staff, and students of the Indoor Environment Program are all working to solve the problems of indoor air quality, health, comfort, and energy use associated with the indoor environment. A common thread throughout this work is the importance of ventilation--both for its role in supporting human health and comfort as well as for its liability in requiring large amounts of energy to heat and cool it. The importance of understanding these interactions can be illustrated by two examples: the health and productivity of workers (Fisk and Rosenfeld, 1996) and the performance of sensitive equipment in clean room environments (Faulkner, et d., 1996). During the past year, we estimated the magnitudes of health and productivity gains that may be obtained by providing better indoor environments. The ratio of the potential financial benefits of improving indoor environments to the costs of the improvements ranges between 20 and 50. A second example is from our Clean Room Energy Efficiency Study: Clean rooms utilize large amounts of electricity to operate fans that recirculate air at very high flow rates through particle filters. Usually, the fans operate continuously at full speed, even when the clean room is unused. To reduce the energy use in a research clean room, the rate of air recirculation was controlled in response to real-time measurements of particle concentration. With this new control system, fan energy use decreased by 65% to 85% while maintaining particle concentrations below the allowable limits except during occasional one-minute periods. The estimated payback period for this technology is one to four years.

  15. Indoor environment program. 1994 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Daisey, J.M.

    1995-04-01

    Buildings use approximately one-third of the energy consumed in the United States. The potential energy savings derived from reduced infiltration and ventilation in buildings are substantial, since energy use associated with conditioning and distributing ventilation air is about 5.5 EJ per year. However, since ventilation is the dominant mechanism for removing pollutants from indoor sources, reduction of ventilation can have adverse effects on indoor air quality, and on the health, comfort, and productivity of building occupants. The Indoor Environment Program in LBL`s Energy and Environment Division was established in 1977 to conduct integrated research on ventilation, indoor air quality, and energy use and efficiency in buildings for the purpose of reducing energy liabilities associated with airflows into, within, and out of buildings while maintaining or improving occupant health and comfort. The Program is part of LBL`s Center for Building Science. Research is conducted on building energy use and efficiency, ventilation and infiltration, and thermal distribution systems; on the nature, sources, transport, transformation, and deposition of indoor air pollutants; and on exposure and health risks associated with indoor air pollutants. Pollutants of particular interest include radon; volatile, semivolatile, and particulate organic compounds; and combustion emissions, including environmental tobacco smoke, CO, and NO{sub x}.

  16. Indoor environment program - 1995 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Daisey, J.M.

    1996-06-01

    Buildings use approximately one-third of the energy consumed in the United States. The potential energy savings derived from reduced infiltration and ventilation in buildings are substantial, since energy use associated with conditioning and distributing ventilation air is about 5.5 EJ per year. However, since ventilation is the dominant mechanism for removing pollutants from indoor sources, reduction of ventilation can have adverse effects on indoor air quality, and on the health, comfort, and productivity of building occupants. The Indoor Environment Program in LBL`s Energy and Environment Division was established in 1977 to conduct integrated research on ventilation, indoor air quality, and energy use and efficiency in buildings for the purpose of reducing energy liabilities associated with airflows into, within, and out of buildings while maintaining or improving occupant health and comfort. The Program is part of LBL`s Center for Building Science. Research is conducted on building energy use and efficiency, ventilation and infiltration, and thermal distribution systems; on the nature, sources, transport, transformation, and deposition of indoor air pollutants; and on exposure and health risks associated with indoor air pollutants. Pollutants of particular interest include radon; volatile, semivolatile, and particulate organic compounds; and combustion emissions, including environmental tobacco smoke, CO, and NO{sub x}.

  17. Portable parallel programming in a Fortran environment

    International Nuclear Information System (INIS)

    May, E.N.

    1989-01-01

    Experience using the Argonne-developed PARMACs macro package to implement a portable parallel programming environment is described. Fortran programs with intrinsic parallelism of coarse and medium granularity are easily converted to parallel programs which are portable among a number of commercially available parallel processors in the class of shared-memory bus-based and local-memory network based MIMD processors. The parallelism is implemented using standard UNIX (tm) tools and a small number of easily understood synchronization concepts (monitors and message-passing techniques) to construct and coordinate multiple cooperating processes on one or many processors. Benchmark results are presented for parallel computers such as the Alliant FX/8, the Encore MultiMax, the Sequent Balance, the Intel iPSC/2 Hypercube and a network of Sun 3 workstations. These parallel machines are typical MIMD types with from 8 to 30 processors, each rated at from 1 to 10 MIPS processing power. The demonstration code used for this work is a Monte Carlo simulation of the response to photons of a ''nearly realistic'' lead, iron and plastic electromagnetic and hadronic calorimeter, using the EGS4 code system. 6 refs., 2 figs., 2 tabs

  18. Real time programming environment for Windows

    Energy Technology Data Exchange (ETDEWEB)

    LaBelle, D.R. [LaBelle (Dennis R.), Clifton Park, NY (United States)

    1998-04-01

    This document provides a description of the Real Time Programming Environment (RTProE). RTProE tools allow a programmer to create soft real time projects under general, multi-purpose operating systems. The basic features necessary for real time applications are provided by RTProE, leaving the programmer free to concentrate efforts on his specific project. The current version supports Microsoft Windows{trademark} 95 and NT. The tasks of real time synchronization and communication with other programs are handled by RTProE. RTProE includes a generic method for connecting a graphical user interface (GUI) to allow real time control and interaction with the programmer`s product. Topics covered in this paper include real time performance issues, portability, details of shared memory management, code scheduling, application control, Operating System specific concerns and the use of Computer Aided Software Engineering (CASE) tools. The development of RTProE is an important step in the expansion of the real time programming community. The financial costs associated with using the system are minimal. All source code for RTProE has been made publicly available. Any person with access to a personal computer, Windows 95 or NT, and C or FORTRAN compilers can quickly enter the world of real time modeling and simulation.

  19. IEEE Std 650-1990: IEEE standard for qualification of Class 1E static battery chargers and inverters for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Methods for qualifying static battery chargers and inverters for Class 1E installations in a mild environment outside containment in nuclear power generating stations are described. The qualification methods set forth employ a combination of type testing and analysis, the latter including a justification of methods, theories, and assumptions used. These procedures meet the requirements of IEEE Std 323-1983, IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations

  20. A survey of object oriented languages in programming environments

    OpenAIRE

    Haakonsen, Harald

    1987-01-01

    Approved for public release; distribution is unlimited This thesis addresses object oriented programming languages; and a restrictive definition of object oriented programming languages is presented and defended. Differences between programming languages are discussed and related to interactive integrated programming environments. Topics related to user friendly interface to the computer system and modem programming practice are discussed. The thesis especially addresses features in ...

  1. Collectively loading programs in a multiple program multiple data environment

    Science.gov (United States)

    Aho, Michael E.; Attinella, John E.; Gooding, Thomas M.; Gooding, Thomas M.; Miller, Samuel J.

    2016-11-08

    Techniques are disclosed for loading programs efficiently in a parallel computing system. In one embodiment, nodes of the parallel computing system receive a load description file which indicates, for each program of a multiple program multiple data (MPMD) job, nodes which are to load the program. The nodes determine, using collective operations, a total number of programs to load and a number of programs to load in parallel. The nodes further generate a class route for each program to be loaded in parallel, where the class route generated for a particular program includes only those nodes on which the program needs to be loaded. For each class route, a node is selected using a collective operation to be a load leader which accesses a file system to load the program associated with a class route and broadcasts the program via the class route to other nodes which require the program.

  2. Lazy functional programs in a concurrent environment

    NARCIS (Netherlands)

    Feijs, L.M.G.; Reniers, M.A.

    1997-01-01

    The mechanism of Landin-style stream input/output (I/O) makes it possible to write functional programs, which behave as reactive systems when executed with lazy evaluation. Functional programming languages like Gofer are attractive for programming the data transformations of a reactive system. But

  3. CERN receives prestigious Milestone recognition from IEEE

    CERN Multimedia

    2005-01-01

    At a ceremony at CERN, Mr W. Cleon Anderson, President of the Institute of Electrical and Electronics Engineers (IEEE) formally a Milestone plaque in recognition of the invention of electronic particle detectors at CERN

  4. Optimization of dairy cattle breeding programs for different environment with genotype by environment interaction

    NARCIS (Netherlands)

    Mulder, H.A.; Veerkamp, R.F.; Ducro, B.J.; Arendonk, van J.A.M.; Bijma, P.

    2006-01-01

    Dairy cattle breeding organizations tend to sell semen to breeders operating in different environments and genotype × environment interaction may play a role. The objective of this study was to investigate optimization of dairy cattle breeding programs for 2 environments with genotype × environment

  5. A Programming Environment for Parallel Vision Algorithms

    Science.gov (United States)

    1990-04-11

    industrial arm on the market , while the unique head was designed by Rochester’s Computer Science and Mechanical Engineering Departments. 9a 4.1 Introduction...R. Constraining-Unification and the Programming Language Unicorn . In Logic Programming, Functions, Relations, and Equations, Degroot and Lind- strom

  6. The Environment and the Relative Protection Programs

    Directory of Open Access Journals (Sweden)

    Constantin Anghelache

    2007-12-01

    Full Text Available The material is presenting, under an adequate structure, an analysis of the environment of Romania. The starting point of the study is given by the natural conditions, influenced by the geographic location of Romania on the globe, evidencing the main characteristics (relief, hydrographic basin, climate, flora and fauna etc.. Afterwards, the material is pointing out the concerns as well as certain outcomes achieved in our country in the field of the environment protection. Particularly, there is the concern regarding the durable development which is emphasized, along with the part that the environment protection should play under the circumstances. Then, the material is evidencing the essence of the policies concerning the environment protection as well as the transitory steps implied in this field by the adhesion of Romania to the European Union.

  7. Leadership Program for Promoting Policies Linking the Environment ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Leadership Program for Promoting Policies Linking the Environment and Health in Africa. It is obvious that in many African countries, no linkages are being made between health policy and environment policy. In 2005, the global network Environment and Development Action in the Third World (ENDA-TM) francophone ...

  8. The Living With a Star Space Environment Testbed Program

    Science.gov (United States)

    Barth, Janet; LaBel, Kenneth; Day, John H. (Technical Monitor)

    2001-01-01

    NASA has initiated the Living with a Star (LWS) Program to develop the scientific understanding to address the aspects of the Connected Sun-Earth system that affects life and society. The Program Architecture includes science missions, theory and modeling and Space Environment Testbeds (SET). This current paper discusses the Space Environment Testbeds. The goal of the SET program is to improve the engineering approach to accomodate and/or mitigate the effects of solar variability on spacecraft design and operations. The SET Program will infuse new technologies into the space programs through collection of data in space and subsequent design and validation of technologies. Examples of these technologies are cited and discussed.

  9. ROSIE: A Programming Environment for Expert Systems

    Science.gov (United States)

    1985-10-01

    ence on Artificial Inteligence , Tbilisi, USSR, 1975. Fain, J., D. Gorlin, F. Hayes-Roth, S. Rosenschein, H. Sowizral, and D. Waterman, The ROSIE Language...gramming environment for artificial intelligence (AI) applications. It provides particular support for designing expert systems, systems that embody

  10. Using Programming Environments in Teaching GIS Concepts

    Directory of Open Access Journals (Sweden)

    Imre Bornemisza

    2009-03-01

    Full Text Available When teaching Geographical Information Systems (GIS it is important to explain the theoretical elements, but it is also necessary to illustrate the basic functions with examples. To help students it is advisable to separate the teaching of fundamentals from the practical application of complex GIS software. A simple programming language like Logo creates opportunities for acquiring knowledge in an easy way. The development of a program makes it possible tounderstand the most important categories. If the program contains query functions as well, students can learn more about problem solution methods.This paper also demonstrates the power of the Logo family of languages which is delivered by different implementations. Elica Logo is used to build simple GIS tools that provide a very widerange of educational problems and lead to numerous ideas for further explorations. The nice intuitive 3D interface is an attractive approach to gain and retain student’s engagement in thelearning process.

  11. CERN receives prestigious Milestone recognition from IEEE

    CERN Multimedia

    2005-01-01

    The Nobel prize winner Georges Charpak and W. Cleon Anderson, IEEE President, unveil the Milestone bronze plaques. At a ceremony on 26 September at the Globe of Science and Innovation, Mr W. Cleon Anderson, President of the Institute of Electrical and Electronics Engineers (IEEE) formally dedicated Milestone plaques recognising the invention of electronic particle detectors at CERN. The plaque were unveiled by Mr Anderson and Georges Charpak, the Nobel-prize winning inventor of wire chamber technology at CERN in 1968. The IEEE is the world's largest professional association dedicated to the advancement of technology with 365,000 individual members in over 150 countries. Established in 1983, there are currently over 60 Milestones around the world. They honour momentous achievements in the history of electrical and electronics engineering, such as the landing of the first transatlantic cable, code breaking at Bletchley Park during World War II, and the development of the Japanese Bullet train, the Tokaido Shin...

  12. The scalable coherent interface, IEEE P1596

    International Nuclear Information System (INIS)

    Gustavson, D.B.

    1990-01-01

    IEEE P1596, the scalable coherent interface (formerly known as SuperBus) is based on experience gained while developing Fastbus (ANSI/IEEE 960--1986, IEC 935), Futurebus (IEEE P896.x) and other modern 32-bit buses. SCI goals include a minimum bandwidth of 1 GByte/sec per processor in multiprocessor systems with thousands of processors; efficient support of a coherent distributed-cache image of distributed shared memory; support for repeaters which interface to existing or future buses; and support for inexpensive small rings as well as for general switched interconnections like Banyan, Omega, or crossbar networks. This paper presents a summary of current directions, reports the status of the work in progress, and suggests some applications in data acquisition and physics

  13. ASTRID:. A Programming Environment for Physicists

    Science.gov (United States)

    Bonomi, E.; Flück, M.; Gruber, R.; Herbin, R.; Richner, T.; Schmid, V.; Tran, C. T.; Merazzi, S.

    The purpose of the ASTRID project [1] is to combine the effort of the scientific community in the development of a software system for simulation and modeling of physical phenomena that meets the requirements of the users. This system includes the data management system MEMCOM [2], the ASTRID command language [3], the three-dimensional graphics system VIEW [4], the ASTRID finite element solver [5] and a few utility programs to interface user defined modules to the ASTRID data structure.

  14. Contour tracking and corner detection in a logic programming environment

    DEFF Research Database (Denmark)

    Bell, Benjamin; Pau, L. F.

    1990-01-01

    The added functionality such as contour tracking and corner detection which logic programming lends to standard image operators is described. An environment for implementing low-level imaging operations with Prolog predicates is considered. Within this environment, higher-level image predicates (...

  15. Diagnostics of communication and information environment of pedagogical program means

    Directory of Open Access Journals (Sweden)

    Елена Вадимовна Журавлёва

    2010-06-01

    Full Text Available The efficiency of pedagogical program means is considered through the correctness of a communication and information environment organization. The totality of pedagogical conditions is adduced; the communication and information environment answers these conditions. The main directions (didactic, psychological, ergonomic of analysis are determined and the methods choice for their diagnostics is grounded.

  16. Factors Influencing Learning Environments in an Integrated Experiential Program

    Science.gov (United States)

    Koci, Peter

    The research conducted for this dissertation examined the learning environment of a specific high school program that delivered the explicit curriculum through an integrated experiential manner, which utilized field and outdoor experiences. The program ran over one semester (five months) and it integrated the grade 10 British Columbian curriculum in five subjects. A mixed methods approach was employed to identify the students' perceptions and provide richer descriptions of their experiences related to their unique learning environment. Quantitative instruments were used to assess changes in students' perspectives of their learning environment, as well as other supporting factors including students' mindfulness, and behaviours towards the environment. Qualitative data collection included observations, open-ended questions, and impromptu interviews with the teacher. The qualitative data describe the factors and processes that influenced the learning environment and give a richer, deeper interpretation which complements the quantitative findings. The research results showed positive scores on all the quantitative measures conducted, and the qualitative data provided further insight into descriptions of learning environment constructs that the students perceived as most important. A major finding was that the group cohesion measure was perceived by students as the most important attribute of their preferred learning environment. A flow chart was developed to help the researcher conceptualize how the learning environment, learning process, and outcomes relate to one another in the studied program. This research attempts to explain through the consideration of this case study: how learning environments can influence behavioural change and how an interconnectedness among several factors in the learning process is influenced by the type of learning environment facilitated. Considerably more research is needed in this area to understand fully the complexity learning

  17. An environment for parallel structuring of Fortran programs

    International Nuclear Information System (INIS)

    Sridharan, K.; McShea, M.; Denton, C.; Eventoff, B.; Browne, J.C.; Newton, P.; Ellis, M.; Grossbard, D.; Wise, T.; Clemmer, D.

    1990-01-01

    The paper describes and illustrates an environment for interactive support of the detection and implementation of macro-level parallelism in Fortran programs. The approach couples algorithms for dependence analysis with both innovative techniques for complexity management and capabilities for the measurement and analysis of the parallel computation structures generated through use of the environment. The resulting environment is complementary to the more common approach of seeking local parallelism by loop unrolling, either by an automatic compiler or manually. (orig.)

  18. Editorial for IEEE Transactions on Power Electronics

    DEFF Research Database (Denmark)

    Blaabjerg, Frede

    2007-01-01

    Our IEEE transactions on power electronics has had some very positive progress these past years under the leadership of Dr. Daan van Wyk. Papers have been processed efficiently both in review time and publication time. This success has spread throughout the whole power electronics community which...

  19. The IEEE 802.11a standards

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. The IEEE 802.11a standards. Provides higher data rate and system capacities and uses OFDM in Physical Layer to mitigate the multi path effects;. Supports multiple 20Mhz channel. Each channel being an OFDM Modulated;; 52 Carriers. 48 data carrier; 4 Carry pilot ...

  20. The role of physicality in rich programming environments

    Science.gov (United States)

    Liu, Allison S.; Schunn, Christian D.; Flot, Jesse; Shoop, Robin

    2013-12-01

    Computer science proficiency continues to grow in importance, while the number of students entering computer science-related fields declines. Many rich programming environments have been created to motivate student interest and expertise in computer science. In the current study, we investigated whether a recently created environment, Robot Virtual Worlds (RVWs), can be used to teach computer science principles within a robotics context by examining its use in high-school classrooms. We also investigated whether the lack of physicality in these environments impacts student learning by comparing classrooms that used either virtual or physical robots for the RVW curriculum. Results suggest that the RVW environment leads to significant gains in computer science knowledge, that virtual robots lead to faster learning, and that physical robots may have some influence on algorithmic thinking. We discuss the implications of physicality in these programming environments for learning computer science.

  1. IEEE C37.98-1987: IEEE standard seismic testing of relays

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This standard specifies the procedures to be used in the seismic testing of relays used in power system facilities. The standard is concerned with the determination of the seismic fragility level of relays and also gives recommendations for proof testing. The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in IEEE Std 344-1987. To define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general, they are (1) the electrical settings and inputs to the relay, and other information to define its conditions during the test; (2) the change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay that constitutes failure; (3) the seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new application, then proof testing must be performed for that new case

  2. IEEE C37.98-1978: IEEE standard seismic testing of relays

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This standard specifies the procedures to be used in the seismic testing of relays used in power system facilities. The standard is concerned with the determination of the seismic fragility level of relays and also gives recommendations for proof testing. The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in ANSI/IEEE Std 344-1975, Recommended Practices for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations. In order to define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general they are: (1) the electrical settings and inputs to the relay, and other information to define its conditions during the test; (2) the change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay which constitutes failure; (3) the seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new case

  3. Ada Run Time Support Environments and a common APSE Interface Set. [Ada Programming Support Environment

    Science.gov (United States)

    Mckay, C. W.; Bown, R. L.

    1985-01-01

    The paper discusses the importance of linking Ada Run Time Support Environments to the Common Ada Programming Support Environment (APSE) Interface Set (CAIS). A non-stop network operating systems scenario is presented to serve as a forum for identifying the important issues. The network operating system exemplifies the issues involved in the NASA Space Station data management system.

  4. Report of the 2014 Programming Models and Environments Summit

    Energy Technology Data Exchange (ETDEWEB)

    Heroux, Michael [US Dept. of Energy, Washington, DC (United States); Lethin, Richard [US Dept. of Energy, Washington, DC (United States)

    2016-09-19

    Programming models and environments play the essential roles in high performance computing of enabling the conception, design, implementation and execution of science and engineering application codes. Programmer productivity is strongly influenced by the effectiveness of our programming models and environments, as is software sustainability since our codes have lifespans measured in decades, so the advent of new computing architectures, increased concurrency, concerns for resilience, and the increasing demands for high-fidelity, multi-physics, multi-scale and data-intensive computations mean that we have new challenges to address as part of our fundamental R&D requirements. Fortunately, we also have new tools and environments that make design, prototyping and delivery of new programming models easier than ever. The combination of new and challenging requirements and new, powerful toolsets enables significant synergies for the next generation of programming models and environments R&D. This report presents the topics discussed and results from the 2014 DOE Office of Science Advanced Scientific Computing Research (ASCR) Programming Models & Environments Summit, and subsequent discussions among the summit participants and contributors to topics in this report.

  5. CONSIDERATIONS ON OBJECT-ORIENTED PROGRAMMING ENVIRONMENT AUTOCAD DRAWINGS

    Directory of Open Access Journals (Sweden)

    PINTILIE Alexandru

    2015-06-01

    Full Text Available In recent years, Low Cost CAD systems are widespread in the technical world. Currently, the highest-rated CAD system is AutoCAD due to the fact that in association with AutoLISP programming language covered a broad range of production needs. As a high-level programming language, AutoLISP provides an easy and efficient programming technique that leads to automation and parameterization of AutoCAD commands and reduces the time spending for designing the drawings. This paper aims to highlight the advantages of using AutoLISP programming environment in the 2D drafting and 3D modeling using AutoCAD tools.

  6. Graphical programming interface: A development environment for MRI methods.

    Science.gov (United States)

    Zwart, Nicholas R; Pipe, James G

    2015-11-01

    To introduce a multiplatform, Python language-based, development environment called graphical programming interface for prototyping MRI techniques. The interface allows developers to interact with their scientific algorithm prototypes visually in an event-driven environment making tasks such as parameterization, algorithm testing, data manipulation, and visualization an integrated part of the work-flow. Algorithm developers extend the built-in functionality through simple code interfaces designed to facilitate rapid implementation. This article shows several examples of algorithms developed in graphical programming interface including the non-Cartesian MR reconstruction algorithms for PROPELLER and spiral as well as spin simulation and trajectory visualization of a FLORET example. The graphical programming interface framework is shown to be a versatile prototyping environment for developing numeric algorithms used in the latest MR techniques. © 2014 Wiley Periodicals, Inc.

  7. Tactical Wireless Networking in Coalition Environments: Implementing an IEEE 802.20 Wireless End-User Network Utilizing FLASH-OFDM to Provide a Secure Mobile Extension to Existing WAN

    National Research Council Canada - National Science Library

    Parrish, William J; Tovar, Daniel R

    2005-01-01

    This thesis will focus on the area of 802.20 wireless networking as a feasible "last mile" solution to wireless access in a tactical coalition environment and will be implemented into a series of experiments...

  8. Justifying Innovative Language Programs in an Environment of ...

    African Journals Online (AJOL)

    pkurgat

    Justifying Innovative Language Programs in an Environment of Change: The Case ... Key words: project management, change management, educational management, .... the sustainability of the course considering that there were and continue to be problems .... language teaching in general on a sound scientific base.

  9. Porting linac application programs to a windowing environment

    International Nuclear Information System (INIS)

    Nonglaton, J.M.; Raich, U.

    1992-01-01

    We report our experience in porting Linac application programs written for Camac controlled hardware consoles to an X-Windows/Motif based workstation environment. Application programs acquire their parameter values from a front end computer (FEC), controlling the acceleration process, via a local area network. The timing for data acquisition and control is determined by the particle source timing. Two server programs on the FEC for repetitive acquisition and command-response mode will be described. The application programs on the workstations access a common parameter access server who establishes the necessary connection to the parameters on the FEC. It displays the parameter's current values and allows control through Motif widgets. An interactive synoptics editor and its corresponding driver program allow easy generation of synoptics displays and interaction through command panels. (author)

  10. Survey on present status and trend of parallel programming environments

    International Nuclear Information System (INIS)

    Takemiya, Hiroshi; Higuchi, Kenji; Honma, Ichiro; Ohta, Hirofumi; Kawasaki, Takuji; Imamura, Toshiyuki; Koide, Hiroshi; Akimoto, Masayuki.

    1997-03-01

    This report intends to provide useful information on software tools for parallel programming through the survey on parallel programming environments of the following six parallel computers, Fujitsu VPP300/500, NEC SX-4, Hitachi SR2201, Cray T94, IBM SP, and Intel Paragon, all of which are installed at Japan Atomic Energy Research Institute (JAERI), moreover, the present status of R and D's on parallel softwares of parallel languages, compilers, debuggers, performance evaluation tools, and integrated tools is reported. This survey has been made as a part of our project of developing a basic software for parallel programming environment, which is designed on the concept of STA (Seamless Thinking Aid to programmers). (author)

  11. IEEE 1451.2 based Smart sensor system using ADuc847

    Science.gov (United States)

    Sreejithlal, A.; Ajith, Jose

    IEEE 1451 standard defines a standard interface for connecting transducers to microprocessor based data acquisition systems, instrumentation systems, control and field networks. Smart transducer interface module (STIM) acts as a unit which provides signal conditioning, digitization and data packet generation functions to the transducers connected to it. This paper describes the implementation of a microcontroller based smart transducer interface module based on IEEE 1451.2 standard. The module, implemented using ADuc847 microcontroller has 2 transducer channels and is programmed using Embedded C language. The Sensor system consists of a Network Controlled Application Processor (NCAP) module which controls the Smart transducer interface module (STIM) over an IEEE1451.2-RS232 bus. The NCAP module is implemented as a software module in C# language. The hardware details, control principles involved and the software implementation for the STIM are described in detail.

  12. Proceedings of the 1988 IEEE international conference on robotics and automation. Volume 1

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    These proceedings compile the papers presented at the international conference (1988) sponsored by IEEE Council on ''Robotics and Automation''. The subjects discussed were: automation and robots of nuclear power stations; algorithms of multiprocessors; parallel processing and computer architecture; and U.S. DOE research programs on nuclear power plants

  13. Laser programs facility management plan for environment, safety, and health

    International Nuclear Information System (INIS)

    Cruz, G.E.

    1996-01-01

    The Lawrence Livermore National Laboratory's (LLNL) Laser Programs ES ampersand H policy is established by the Associate Director for Laser Programs. This FMP is one component of that policy. Laser Programs personnel design, construct and operate research and development equipment located in various Livermore and Site 300 buildings. The Programs include a variety of activities, primarily laser research and development, inertial confinement fusion, isotope separation, and an increasing emphasis on materials processing, imaging systems, and signal analysis. This FMP is a formal statement of responsibilities and controls to assure operational activities are conducted without harm to employees, the general public, or the environment. This plan identifies the hazards associated with operating a large research and development facility and is a vehicle to control and mitigate those hazards. Hazards include, but are not limited to: laser beams, hazardous and radioactive materials, criticality, ionizing radiation or x rays, high-voltage electrical equipment, chemicals, and powered machinery

  14. Mall Walking Program Environments, Features, and Participants: A Scoping Review.

    Science.gov (United States)

    Farren, Laura; Belza, Basia; Allen, Peg; Brolliar, Sarah; Brown, David R; Cormier, Marc L; Janicek, Sarah; Jones, Dina L; King, Diane K; Marquez, David X; Rosenberg, Dori E

    2015-08-13

    Walking is a preferred and recommended physical activity for middle-aged and older adults, but many barriers exist, including concerns about safety (ie, personal security), falling, and inclement weather. Mall walking programs may overcome these barriers. The purpose of this study was to summarize the evidence on the health-related value of mall walking and mall walking programs. We conducted a scoping review of the literature to determine the features, environments, and benefits of mall walking programs using the RE-AIM framework (reach, effectiveness, adoption, implementation, and maintenance). The inclusion criteria were articles that involved adults aged 45 years or older who walked in indoor or outdoor shopping malls. Exclusion criteria were articles that used malls as laboratory settings or focused on the mechanics of walking. We included published research studies, dissertations, theses, conference abstracts, syntheses, nonresearch articles, theoretical papers, editorials, reports, policy briefs, standards and guidelines, and nonresearch conference abstracts and proposals. Websites and articles written in a language other than English were excluded. We located 254 articles on mall walking; 32 articles met our inclusion criteria. We found that malls provided safe, accessible, and affordable exercise environments for middle-aged and older adults. Programmatic features such as program leaders, blood pressure checks, and warm-up exercises facilitated participation. Individual benefits of mall walking programs included improvements in physical, social, and emotional well-being. Limited transportation to the mall was a barrier to participation. We found the potential for mall walking programs to be implemented in various communities as a health promotion measure. However, the research on mall walking programs is limited and has weak study designs. More rigorous research is needed to define best practices for mall walking programs' reach, effectiveness, adoption

  15. The Living With a Star Program Space Environment Testbed

    Science.gov (United States)

    Barth, Janet; Day, John H. (Technical Monitor)

    2001-01-01

    This viewgraph presentation describes the objective, approach, and scope of the Living With a Star (LWS) program at the Marshall Space Flight Center. Scientists involved in the project seek to refine the understanding of space weather and the role of solar variability in terrestrial climate change. Research and the development of improved analytic methods have led to increased predictive capabilities and the improvement of environment specification models. Specifically, the Space Environment Testbed (SET) project of LWS is responsible for the implementation of improved engineering approaches to observing solar effects on climate change. This responsibility includes technology development, ground test protocol development, and the development of a technology application model/engineering tool.

  16. Learning Programming with IPRO: The Effects of a Mobile, Social Programming Environment

    Science.gov (United States)

    Martin, Taylor; Berland, Matthew; Benton, Tom; Smith, Carmen Petrick

    2013-01-01

    In this paper, we present two studies examining how high school students learn to program in a mobile, social programming environment that we have developed and deployed ("IPRO"). IPRO is delivered, with an associated curriculum, as an iPod Touch app and is freely and publicly available. We find that the affordances of mobility and…

  17. DICE: An Object Oriented Programming Environment for Cooperative Engineering Design

    Science.gov (United States)

    1989-03-20

    environment called PARMENIDES /FRULEKIT; PARMENIDES /FRULEKIT supports programming in frames and rules and was developed in LISP at Carnegie-Mellon...the domain of building design and construction. The Blackboard in DICEY-BUILDER is represented as frames in PARMENIDES , while the KMs are implemented... PARMENIDES fo rart omat format d a b C /envelope BLACKBOAR D machine to machine (’BLACKBOARD l m message f il transfer message p read •d message format J

  18. Fostering computational thinking skills with a tangible blocks programming environment

    OpenAIRE

    Turchi, T; Malizia, A

    2016-01-01

    Computational Thinking has recently returned into the limelight as an essential skill to have for both the general public and disciplines outside Computer Science. It encapsulates those thinking skills integral to solving complex problems using a computer, thus widely applicable in our technological society. Several public initiatives such as the Hour of Code successfully introduced it to millions of people of different ages and backgrounds, mostly using Blocks Programming Environments like S...

  19. Proceedings of the IEEE Machine Learning for Signal Processing XVII

    DEFF Research Database (Denmark)

    The seventeenth of a series of workshops sponsored by the IEEE Signal Processing Society and organized by the Machine Learning for Signal Processing Technical Committee (MLSP-TC). The field of machine learning has matured considerably in both methodology and real-world application domains and has...... become particularly important for solution of problems in signal processing. As reflected in this collection, machine learning for signal processing combines many ideas from adaptive signal/image processing, learning theory and models, and statistics in order to solve complex real-world signal processing......, and two papers from the winners of the Data Analysis Competition. The program included papers in the following areas: genomic signal processing, pattern recognition and classification, image and video processing, blind signal processing, models, learning algorithms, and applications of machine learning...

  20. Assertion checking environment (ACE) for formal verification of C programs

    International Nuclear Information System (INIS)

    Sharma, Babita; Dhodapkar, S.D.; Ramesh, S.

    2003-01-01

    In this paper we describe an Assertion Checking Environment (ACE) for compositional verification of programs, which are written in an industrially sponsored safe subset of C programming language called MISRA C [Guidelines for the Use of the C Language in Vehicle Based Software, 1998]. The theory is based on Hoare logic [Commun. ACM 12 (1969) 576] and the C programs are verified using static assertion checking technique. First the functional specifications of the program, captured in the form of pre- and post-conditions for each C function, are derived from the specifications. These pre- and post-conditions are then introduced as assertions (also called annotations or formal comments) in the program code. The assertions are then proved formally using ACE and theorem proving tool called Stanford Temporal Prover [The Stanford Temporal Prover User's Manual, 1998]. ACE has been developed by us and consists mainly of a translator c2spl, a GUI and some utility programs. The technique and tools developed are targeted towards verification of real-time embedded software

  1. Food, Environment, Engineering and Life Sciences Program (Invited)

    Science.gov (United States)

    Mohtar, R. H.; Whittaker, A.; Amar, N.; Burgess, W.

    2009-12-01

    Food, Environment, Engineering and Life Sciences Program Nadia Amar, Wiella Burgess, Rabi H. Mohtar, and Dale Whitaker Purdue University Correspondence: mohtar@purdue.edu FEELS, the Food, Environment, Engineering and Life Sciences Program is a grant of the National Science Foundation for the College of Agriculture at Purdue University. FEELS’ mission is to recruit, retain, and prepare high-achieving students with financial difficulties to pursue STEM (Science, Technology, Engineering, and Mathematics) careers. FEELS achieves its goals offering a scholarship of up to 10,000 per student each year, academic, research and industrial mentors, seminars, study tables, social and cultural activities, study abroad and community service projects. In year one, nine low-income, first generation and/or ethnic minority students joined the FEELS program. All 9 FEELS fellows were retained in Purdue’s College of Agriculture (100%) with 7 of 9 (77.7%) continuing to pursue STEM majors. FEELS fellows achieved an average GPA in their first year of 3.05, compared to the average GPA of 2.54 for low-income non- FEELS students in the College of Agriculture. A new cohort of 10 students joined the program in August 2009. FEELS fellows received total scholarships of nearly 50,000 for the 2008-2009 academic year. These scholarships were combined with a holistic program that included the following key elements: FEELS Freshman Seminars I and II, 2 study tables per week, integration activities and frequent meetings with FEELS academic mentors and directors. Formative assessments of all FEELS activities were used to enhance the first year curriculum for the second cohort. Cohort 1 will continue into their second year where the focus will be on undergraduate research. More on FEELS programs and activities: www.purdue.edu/feels.

  2. IEEE Std 323-1983: IEEE standard for qualifying Class 1E equipment for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This standard describes the basic requirements for qualifying Class 1E equipment with interfaces that are to be used in nuclear power generating stations. The requirements presented include the principles, procedures, and methods of qualification. These qualification requirements, when met, will confirm the adequacy of the equipment design under normal, abnormal, design basis event, post design basis event, and in-service test conditions for the performance of safety function(s). The purpose of this standard is to identify requirements for the qualification of Class 1E equipment, including those interfaces whose failure could adversely affect the performance of Class 1E equipment and systems. The methods described shall be used for qualifying equipment, extending qualification, and updating qualification if the equipment is modified. Other issued IEEE standards which present qualification methods for specific equipment or components, or both, and those that deal with parts of the qualification program, may be used to supplement this standard, as applicable

  3. IEEE Std 649-1980: IEEE standard for qualifying Class 1E motor control centers for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This standard describes the basic principles, requirements, and methods for qualifying Class 1E motor control centers for outside containment applications in nuclear power generating stations. Qualification of motor control centers located inside containment in a nuclear power generating station is beyond the scope of this standard. The purpose of this standard is (1) to define specific qualification requirements for Class 1E motor control centers in accordance with the more general qualification requirements of IEEE Std 323-1974, IEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations; (2) to provide guidance in establishing a qualification program for demonstrating the design adequacy of Class 1E motor control centers in nuclear power generating station applications

  4. 7th IEEE International Conference Intelligent Systems

    CERN Document Server

    Atanassov, KT; Doukovska, L; Hadjiski, M; Jotsov, V; Kacprzyk, J; Kasabov, N; Sotirov, S; Szmidt, E; Zadrożny, S; Filev, D; Jabłkowski, J; Kacprzyk, J; Krawczak, M; Popchev, I; Rutkowski, L; Sgurev, V; Sotirova, E; Szynkarczyk, P

    2015-01-01

    This two volume set of books constitutes the proceedings of the 2014  7th IEEE International Conference Intelligent Systems (IS), or IEEE IS’2014 for short, held on September 24‐26, 2014 in Warsaw, Poland. Moreover, it contains some selected papers from the collocated IWIFSGN'2014-Thirteenth International Workshop on Intuitionistic Fuzzy Sets and Generalized Nets.The conference was organized by the Systems Research Institute, Polish Academy of Sciences, Department IV of Engineering Sciences, Polish Academy of Sciences, and Industrial Institute of Automation and Measurements - PIAP.The papers included in the two proceedings volumes have been subject to a thorough review process by three highly qualified peer reviewers.Comments and suggestions from them have considerable helped improve the quality of the papers but also the division of the volumes into parts, and assignment of the papers to the best suited parts.  

  5. IEEE 802.11 ECG monitoring system.

    Science.gov (United States)

    Tejero-Calado, Juan; Lopez-Casado, Carmen; Bernal-Martin, Antonio; Lopez-Gomez, Miguel; Romero-Romero, Marco; Quesada, Guillermo; Lorca, Julio; Rivas, Ramon

    2005-01-01

    New wireless technologies make possible the implementation of high level integration wireless devices which allow the replacement of traditional large wired monitoring devices. This kind of devices favours at-home hospitalization, reducing the affluence to sanitary assistance centers to make routine controls. This fact causes a really favourable social impact, especially for elder people, rural-zone inhabitant, chronic patients and handicapped people. Furthermore, it offers new functionalities to physicians and will reduce the sanitary cost. Among these functionalities, biomedical signals can be sent to other devices (screen, PDA, PC...) or processing centers, without restricting the patients' mobility. The aim of this project is the development and implementation of a reduced size multi-channel electrocardiograph based on IEEE 802.11, which allows wireless monitoring of patients, and the insertion of the information into the TCP/IP Hospital network.

  6. IEEE C37.105-1987: IEEE standard for qualifying Class 1E protective relays and auxiliaries for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This standard describes the basic principles, requirements, and methods for qualifying Class 1E protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for applications in nuclear power generating stations. When properly employed it can be used to demonstrate the design adequacy of such equipment under normal, abnormal, design basis event and post design basis event conditions in accordance with ANSI/IEEE Std 323-1983. When protective relays and auxiliaries are located in areas not subject to harsh environments, environmental qualification is not required. Protective relays and auxiliaries located inside primary containment in a nuclear power generating station present special conditions beyond the scope of this document. The qualification procedure presented is generic in nature. Other methods may be used at the discretion of the qualifier, provided the basic precepts of ANSI/IEEE Std 32301983 are satisfied

  7. DEGAS: Dynamic Exascale Global Address Space Programming Environments

    Energy Technology Data Exchange (ETDEWEB)

    Demmel, James [Univ. of California, Berkeley, CA (United States)

    2018-02-23

    The Dynamic, Exascale Global Address Space programming environment (DEGAS) project will develop the next generation of programming models and runtime systems to meet the challenges of Exascale computing. The Berkeley part of the project concentrated on communication-optimal code generation to optimize speed and energy efficiency by reducing data movement. Our work developed communication lower bounds, and/or communication avoiding algorithms (that either meet the lower bound, or do much less communication than their conventional counterparts) for a variety of algorithms, including linear algebra, machine learning and genomics. The Berkeley part of the project concentrated on communication-optimal code generation to optimize speed and energy efficiency by reducing data movement. Our work developed communication lower bounds, and/or communication avoiding algorithms (that either meet the lower bound, or do much less communication than their conventional counterparts) for a variety of algorithms, including linear algebra, machine learning and genomics.

  8. IEEE International Workshop on Machine Learning for Signal Processing: Preface

    DEFF Research Database (Denmark)

    Tao, Jianhua

    The 21st IEEE International Workshop on Machine Learning for Signal Processing will be held in Beijing, China, on September 18–21, 2011. The workshop series is the major annual technical event of the IEEE Signal Processing Society's Technical Committee on Machine Learning for Signal Processing...

  9. Development of Virtual Environment under Member State Support Program

    International Nuclear Information System (INIS)

    Koh, Byungmarn; Lee, Nayoung

    2013-01-01

    Member State Support Program (MSSP) is comprised of various programs such as development of safeguards approach, training, information analysis and so on. Each support programs would be evaluated biennially through coordinators' meeting. IAEA publish 'Development and Implementation Support Programme for Nuclear Verification' so that the member state can review it. In the program, IAEA specify the need to develop the virtual reality based training tools. The objective of this project is to develop comprehensive training software dedicated to verification activities in the field based on the virtual environment. The training for the IAEA inspector is indispensable to maintain or improve their verification capability and to be prepared for the inspection of the complicated facilities. However, the grabbing of the available facility is not easy due to following limitations such as security, confidentiality, interference of the commercial operation and so on. Therefore, the virtual environment, which can replace a real facility, is required for the IAEA training. The objective of this software is to support the IAEA's verification capability. It is useful for the trainer and trainee to better understand how nuclear materials are processed in the fuel fabrication facility and what kind safeguards approaches are needed at each process before inspections. The final product will be integrated in the IAEA safeguards training courses to improve the efficiency of the safeguards training. Also we are going to make a decision if additional projects such as CANDU fuel parts or other facilities depending on evaluation results at the IAEA training course will be held on Korea in this year

  10. Development of Virtual Environment under Member State Support Program

    Energy Technology Data Exchange (ETDEWEB)

    Koh, Byungmarn; Lee, Nayoung [Korea Institute of Nuclear Non-proliferation and Control, Daejeon (Korea, Republic of)

    2013-05-15

    Member State Support Program (MSSP) is comprised of various programs such as development of safeguards approach, training, information analysis and so on. Each support programs would be evaluated biennially through coordinators' meeting. IAEA publish 'Development and Implementation Support Programme for Nuclear Verification' so that the member state can review it. In the program, IAEA specify the need to develop the virtual reality based training tools. The objective of this project is to develop comprehensive training software dedicated to verification activities in the field based on the virtual environment. The training for the IAEA inspector is indispensable to maintain or improve their verification capability and to be prepared for the inspection of the complicated facilities. However, the grabbing of the available facility is not easy due to following limitations such as security, confidentiality, interference of the commercial operation and so on. Therefore, the virtual environment, which can replace a real facility, is required for the IAEA training. The objective of this software is to support the IAEA's verification capability. It is useful for the trainer and trainee to better understand how nuclear materials are processed in the fuel fabrication facility and what kind safeguards approaches are needed at each process before inspections. The final product will be integrated in the IAEA safeguards training courses to improve the efficiency of the safeguards training. Also we are going to make a decision if additional projects such as CANDU fuel parts or other facilities depending on evaluation results at the IAEA training course will be held on Korea in this year.

  11. Proceedings of IEEE Machine Learning for Signal Processing Workshop XV

    DEFF Research Database (Denmark)

    Larsen, Jan

    These proceedings contains refereed papers presented at the Fifteenth IEEE Workshop on Machine Learning for Signal Processing (MLSP’2005), held in Mystic, Connecticut, USA, September 28-30, 2005. This is a continuation of the IEEE Workshops on Neural Networks for Signal Processing (NNSP) organized...... by the NNSP Technical Committee of the IEEE Signal Processing Society. The name of the Technical Committee, hence of the Workshop, was changed to Machine Learning for Signal Processing in September 2003 to better reflect the areas represented by the Technical Committee. The conference is organized...... by the Machine Learning for Signal Processing Technical Committee with sponsorship of the IEEE Signal Processing Society. Following the practice started two years ago, the bound volume of the proceedings is going to be published by IEEE following the Workshop, and we are pleased to offer to conference attendees...

  12. Performance comparison of IEEE 802.11g and IEEE 802.11n in the presence of interference from 802.15.4 networks

    OpenAIRE

    Masood, Syed Haani

    2013-01-01

    In this paper we compare the packet error rate (PER) and maximum throughput of IEEE 802.11n and IEEE 802.11g under interference from IEEE 802.15.4 by using MATLAB to simulate the IEEE PHY for 802.11n and 802.11g networks.

  13. A coexistence model of IEEE 802.15.4 and IEEE 802.1 lbIg

    NARCIS (Netherlands)

    Yuan, Wei; Wang, Xiangyu; Linnartz, J.P.M.G.

    2007-01-01

    IEEE 802.15.4 was developed to meet the needs for low-rate wireless communication. However, due to its low power, IEEE 802.15.4 is potentially vulnerable to interference by other wireless technologies having much higher power and working in the same industrial, scientific, and medical (ISM) band

  14. Active Channel Reservation for Coexistence Mechanism (ACROS) for IEEE 802.15.4 and IEEE 802.11

    Science.gov (United States)

    Shin, Soo Young; Woo, Dong Hyuk; Lee, Jong Wook; Park, Hong Seong; Kwon, Wook Hyun

    In this paper, a coexistence mechanism between IEEE 802.15.4 and IEEE 802.11b, Active Channel Reservation for cOexiStence (ACROS), is proposed. The key idea underlining ACROS is to reserve the channel for IEEE 802.15.4 transmission, where IEEE 802.11 transmissions are forbidden. The request-to-send (RTS)/clear-to send (CTS) mechanism within IEEE 802.11 is used to reserve a channel. The proposed ACROS mechanism is implemented into a PC based prototype. The embedded version of ACROS is also developed to mitigate the timing drift problem in the PC-based ACROS. The efficiency of ACROS is shown using the throughput and packet error rate achieved in actual experiments.

  15. Multi-Language Programming Environments for High Performance Java Computing

    Directory of Open Access Journals (Sweden)

    Vladimir Getov

    1999-01-01

    Full Text Available Recent developments in processor capabilities, software tools, programming languages and programming paradigms have brought about new approaches to high performance computing. A steadfast component of this dynamic evolution has been the scientific community’s reliance on established scientific packages. As a consequence, programmers of high‐performance applications are reluctant to embrace evolving languages such as Java. This paper describes the Java‐to‐C Interface (JCI tool which provides application programmers wishing to use Java with immediate accessibility to existing scientific packages. The JCI tool also facilitates rapid development and reuse of existing code. These benefits are provided at minimal cost to the programmer. While beneficial to the programmer, the additional advantages of mixed‐language programming in terms of application performance and portability are addressed in detail within the context of this paper. In addition, we discuss how the JCI tool is complementing other ongoing projects such as IBM’s High‐Performance Compiler for Java (HPCJ and IceT’s metacomputing environment.

  16. Qualification of cables to IEEE standards 323-1974 and 383-1974

    International Nuclear Information System (INIS)

    Hosticka, C.; Kingsbury, E.R.; Bruhin, A.C.

    1980-01-01

    Wire and Cable manufacturers generally qualify products for class IE application by envelope type testing to user specifications and environmental conditions recommended by IEEE Standards 323-1974 and 383-1974. The General Electric Wire and Cable Business Department recently completed two such qualification programs. Cable constructions tested were 600V control cables and 600 V, 2kV, and 15kV power cables insulated with flame resistant mineral filled crosslinked polyethylene. The 15kV samples included taped field splices. In the second test program, the steam pressure-temperature profile included a simulated main steam line break. Test specimens were wrapped on grounded mandrels and were electrically loaded throughout the simulated LOCA tests. After completion of environmental testing, samples were subjected to the IEEE 383 simulated post-LOCA test. 6 refs

  17. Qualification of cables to IEEE standards 323-1974 and 383-1974

    International Nuclear Information System (INIS)

    Hosticka, C.; Kingsbury, E.R.; Bruhin, A.C.

    1980-01-01

    Wire and Cable manufacturers generally qualify products for class IE application by envelope type testing to user specifications and environmental conditions recommended by IEEE Standards 323-1974 and 383-1974. The General Electric Wire and Cable Business Department recently completed two such qualification programs. Cable constructions tested were 600V control cables and 600 V, 2KV, and 15KV power cables insulated with flame resistant mineral filled crosslinked polyethylene. The 15KV samples included taped field splices. In the second test program, the steam pressure-temperature profile included a simulated main steam line break. Test specimens were wrapped on grounded mandrels and were electrically loaded throughout the simulated LOCA tests. After completion of environmental testing, samples were subjected to the IEEE 383 simulated post-LOCA test. 6 refs

  18. Attacks on IEEE 802.11 wireless networks

    Directory of Open Access Journals (Sweden)

    Dejan Milan Tepšić

    2013-06-01

    Full Text Available Security of wireless computer networks was initially secured with the WEP security protocol, which relies on the RC4 encryption algorithm and the CRC algorithm to check the integrity. The basic problems of the WEP are a short initialization vector, unsafe data integrity checking, using a common key, the lack of mechanisms for management and exchange of keys, the lack of protection from the endless insertion of the same package into the network, the lack of authentication of access points and the like. The consequences of these failures are easy attacks against the WEP network, namely their complete insecurity. Therefore, the work began on the IEEE 802.11i protocol, which should radically improve the security of wireless networks. Since the development of a protocol lasted, the WPA standard was released to offset the security gap caused by the WEP. The WPA also relies on RC4 and CRC algorithms, but brings temporary keys and the MIC algorithm for data integrity. The 802.1X authentication was introduced and common keys are no longer needed, since it is possible to use an authentication server. The length of the initialization vector was increased and the vector is obtained based on the packet serial number, in order to prevent the insertion of the same packet into the network. The weakness of the WPA security mechanism is the use of a common key. WPA2 (802.11i later appeared. Unlike the WPA mechanism that worked on old devices with the replacement of software, WPA2 requires new network devices that can perform AES encryption. AES replaces the RC4 algorithm and delivers much greater security. Data integrity is protected by encryption. Despite progress, there are still weaknesses in wireless networks. Attacks for denial of service are possible as well as spoofing package headers attacks. For now, it is not advisable to use wireless networks in environments where unreliability and unavailability are not tolerated. Introduction In the entire history of

  19. Easy robot programming for beginners and kids using augmented reality environments

    Science.gov (United States)

    Sakamoto, Kunio; Nishiguchi, Masahiro

    2010-11-01

    The authors have developed the mobile robot which can be programmed by command and instruction cards. All you have to do is to arrange cards on a table and to shot the programming stage by a camera. Our card programming system recognizes instruction cards and translates icon commands into the motor driver program. This card programming environment also provides low-level structure programming.

  20. eXascale PRogramming Environment and System Software (XPRESS)

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, Barbara [Univ. of Houston, TX (United States); Gabriel, Edgar [Univ. of Houston, TX (United States)

    2015-11-30

    Exascale systems, with a thousand times the compute capacity of today’s leading edge petascale computers, are expected to emerge during the next decade. Their software systems will need to facilitate the exploitation of exceptional amounts of concurrency in applications, and ensure that jobs continue to run despite the occurrence of system failures and other kinds of hard and soft errors. Adapting computations at runtime to cope with changes in the execution environment, as well as to improve power and performance characteristics, is likely to become the norm. As a result, considerable innovation is required to develop system support to meet the needs of future computing platforms. The XPRESS project aims to develop and prototype a revolutionary software system for extreme-­scale computing for both exascale and strong­scaled problems. The XPRESS collaborative research project will advance the state-­of-­the-­art in high performance computing and enable exascale computing for current and future DOE mission-­critical applications and supporting systems. The goals of the XPRESS research project are to: A. enable exascale performance capability for DOE applications, both current and future, B. develop and deliver a practical computing system software X-­stack, OpenX, for future practical DOE exascale computing systems, and C. provide programming methods and environments for effective means of expressing application and system software for portable exascale system execution.

  1. Rhone-Poulenc claims progress for environment program

    International Nuclear Information System (INIS)

    Back, R.

    1993-01-01

    Rhone-Poulenc (RP; Paris) made further progress last year in its pollution-reducing efforts, under the group's worldwide three-year Environment Plan (1992--1994). The company's water index improved by 15% from 1991 and by 22% from 1990 -- slightly ahead of target. The air index improved 9% from 1991 and 15% from 1990. open-quotes Progress regarding atmospheric emissions is significant, but we wish to go further in order to reach our medium-term objectives,close quotes says RP vice-chairman Jean-Marc Bruel. About 47% of the company's capital spending in 1992 was devoted to these emissions. The solid waste index remained static, with an improvement of 1% compared with an 18% advance in 1991. The startup of incineration units in 1993 will help correct this situation. Bruel reiterates the group's established goal of a 50% reduction in all effluent and solid waste by 1995, and 65% by 2000, using 1990 as the base year for its environment index. He says the indices have been adopted by the French chemical industry association -- Union des Industries Chimiques -- and the U.K.'s Chemical Industries Association. RP's environment-related expenditures in 1992 amounted to F1.8 billion ($330 million), of which F1.2 billion was for operating expenses and the remainder for new investments. Expenditures in France were F594 million and F479 million, respectively; the US, F381 million and F122 million; and Brazil F64 million and F14 million. Spending is forecast to be at a similar level in 1993. Environmental research, with spending of F5.8 billion in 1992, is integrated into all the group's research programs

  2. Planning of Efficient Wireless Access with IEEE 802.16 for Connecting Home Network to the Internet

    Directory of Open Access Journals (Sweden)

    Pichet Ritthisoonthorn

    2010-01-01

    Full Text Available The emergence of IEEE802.16 wireless standard technology (WiMAX has significantly increased the choice to operators for the provisioning of wireless broadband access network. WiMAX is being deployed to compliment with xDSL in underserved or lack of the broadband network area, in both developed and developing countries. Many incumbent operators in developing countries are considering the deployment of WiMAX as part of their broadband access strategy. This paper presents an efficient and simple method for planning of broadband fixed wireless access (BFWA with IEEE802.16 standard to support home connection to Internet. The study formulates the framework for planning both coverage and capacity designs. The relationship between coverage area and access rate from subscriber in each environment area is presented. The study also presents the throughput and channel capacity of IEEE802.16 in different access rates. An extensive analysis is performed and the results are applied to the real case study to demonstrate the practicality of using IEEE 802.16 for connecting home to Internet. Using empirical data and original subscriber traffic from measurement, it is shown that the BFWA with IEEE802.16 standard is a capacity limited system. The capacity of IEEE802.16 is related to different factors including frequency bandwidth, spectrum allocation, estimation of traffic per subscriber, and choice of adaptive modulation from subscriber terminal. The wireless access methods and procedures evolved in this research work and set out in this paper are shown to be well suited for planning BFWA system based on IEEE802.16 which supports broadband home to Internet connections.

  3. Conducting Simulation Studies in the R Programming Environment.

    Science.gov (United States)

    Hallgren, Kevin A

    2013-10-12

    Simulation studies allow researchers to answer specific questions about data analysis, statistical power, and best-practices for obtaining accurate results in empirical research. Despite the benefits that simulation research can provide, many researchers are unfamiliar with available tools for conducting their own simulation studies. The use of simulation studies need not be restricted to researchers with advanced skills in statistics and computer programming, and such methods can be implemented by researchers with a variety of abilities and interests. The present paper provides an introduction to methods used for running simulation studies using the R statistical programming environment and is written for individuals with minimal experience running simulation studies or using R. The paper describes the rationale and benefits of using simulations and introduces R functions relevant for many simulation studies. Three examples illustrate different applications for simulation studies, including (a) the use of simulations to answer a novel question about statistical analysis, (b) the use of simulations to estimate statistical power, and (c) the use of simulations to obtain confidence intervals of parameter estimates through bootstrapping. Results and fully annotated syntax from these examples are provided.

  4. Conducting Simulation Studies in the R Programming Environment

    Directory of Open Access Journals (Sweden)

    Kevin A. Hallgren

    2013-10-01

    Full Text Available Simulation studies allow researchers to answer specific questions about data analysis, statistical power, and best-practices for obtainingaccurate results in empirical research. Despite the benefits that simulation research can provide, many researchers are unfamiliar with available tools for conducting their own simulation studies. The use of simulation studies need not be restricted toresearchers with advanced skills in statistics and computer programming, and such methods can be implemented by researchers with a variety of abilities and interests. The present paper provides an introduction to methods used for running simulationstudies using the R statistical programming environment and is written for individuals with minimal experience running simulation studies or using R. The paper describes the rationale and benefits of using simulations and introduces R functions relevant for many simulation studies. Three examples illustrate different applications for simulation studies, including (a the use of simulations to answer a novel question about statistical analysis, (b the use of simulations to estimate statistical power, and (c the use of simulations to obtain confidence intervals of parameter estimates throughbootstrapping. Results and fully annotated syntax from these examples are provided.

  5. Guest editors' introduction : Highlights from IEEE Pacific Visualization

    NARCIS (Netherlands)

    Wijk, van J.J.; North, S.; Shen, H.-W.

    2010-01-01

    This article looks briefly at four articles based on papers from the 2010 IEEE Pacific Visualization Symposium. These articles, which strongly focus on visual design and applications, cover a range of applications in scientific visualization, information visualization, and graph visualization,

  6. State of the environment: selected topics, 1979. [Annual report of Executive Director, UN Environment Program

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    This annual report of the Executive Director, UN Environment Program, to the Governing Council of the United Nations focuses on four topics of global significance: schistosomiasis, pesticide resistance, noise pollution, and tourism. The four topics, while not the only urgent ones, are important contemporary problems associated with the impacts of development and environmental management. The pressures of man's efforts to increase the agricultural base through irrigation and chemical pesticides have resulted in an unprecedented spread of infectious schistosomiasis and pesticide pollution. Industrialization and urbanization have raised noise levels until they represent serious health hazards. International tourism has grown to such proportions that hundreds of millions of individual trips are taken by the average public each year. The positive and negative aspects of these developments are examined in hopes of stimulating discussions that will lead to more desirable planning and management. 81 references. (DCK)

  7. VARNOST BREZŽIČNIH OMREŽIJ PO STANDARDU IEEE 802.11

    OpenAIRE

    Štumberger, Matej

    2013-01-01

    Diplomska naloga se osredotoča na problem varovanja brezžičnih omrežij, zasnovanih po standardu IEEE 802.11. Opisano je združenje IEEE in njihova specifikacija standardov z oznako 802, prav tako pa so opisani tudi standardi, protokoli in tehnike varovanja in zaščite omrežij, ki delujejo po tej specifikaciji. Predstavljeno je tudi trenutno stanje varnosti brezžičnih omrežij na področju mesta Ptuj, opisani in prikazani pa so tudi različni pristopi za zlorabo brezžičnih omrežij, skupaj s program...

  8. Integration of IEEE 1451 and HL7 exchanging information for patients' sensor data.

    Science.gov (United States)

    Kim, Wooshik; Lim, Suyoung; Ahn, Jinsoo; Nah, Jiyoung; Kim, Namhyun

    2010-12-01

    HL7 (Health Level 7) is a standard developed for exchanging incompatible healthcare information generated from programs or devices among heterogenous medical information systems. At present, HL7 is growing as a global standard. However, the HL7 standard does not support effective methods for treating data from various medical sensors, especially from mobile sensors. As ubiquitous systems are growing, HL7 must communicate with various medical transducers. In the area of sensor fields, IEEE 1451 is a group of standards for controlling transducers and for communicating data from/to various transducers. In this paper, we present the possibility of interoperability between the two standards, i.e., HL7 and IEEE 1451. After we present a method to integrate them and show the preliminary results of this approach.

  9. IEEE Conference Record - Abstracts. 1997 IEEE International Conference on Plasma Science, 19 - 22 May 1997 San Diego, California

    National Research Council Canada - National Science Library

    Hyman, Julius

    1997-01-01

    This 360 page softbound publication includes the following major sections. An invitation to ICOPS'97, Catamaran Resort Hotel Floor Pinas, Officers of the IEEE Nuclear and Plasma Sciences Society, Conference Information...

  10. Programming Sustainable Urban Nodes for Spontaneous, Intensive Urban Environments

    Science.gov (United States)

    Szubryt-Obrycka, Adriana

    2017-10-01

    functional programming (services). Then, the aspect of permanence or temporality will be addressed to determine the choice of appropriate technologies used in order to convey programmatic assertions into physical solutions. The nodes are meant to be as lightweight installments in the area as possible, but at the same time as durable and of good quality as to support positive social effects and reinforce building social capital in the area. The author believe that this emergency-based AT node scenario can be extrapolated to unbalanced housing areas being the result of urban sprawl, after being only slightly adjusted to local standards. But the main goal is to allow for efficient interventions in areas in dire needs and poor environments with limited resources or limited funds.

  11. Energy and environment annual report 1974. [Environmental Research programs

    Energy Technology Data Exchange (ETDEWEB)

    Blumstein, C. (ed.)

    1974-01-01

    Research in the Division's environmental science program includes air pollution, water pollution, and the effects of pollutants on man and natural ecosystems. Work has focused on the chemistry and physics of particle surfaces. Using the technique of electron spectroscopy for chemical analysis (ESCA), surface reactions of sulfur and nitrogen compounds have been studied, and results include the identification of new chemical forms of nitrogen on particle surfaces and evidence for the importance of particle surfaces in the catalysis of sulfur dioxide to sulfuric acid. The Division's work in water pollution has been devoted to the study of trace metals in the estuarine environment, especially in San Francisco Bay. Studies on the effect of dredging operations on trace metals in the Mare Island ship channel and on the distribution of cadmium in Bay sediments have been performed. Research has also been conducted on the distribution of trace elements between bound states on suspended particles and in solution in Bay waters. Research is being conducted on a variety of problems relating to effects of pollutants. Biological studies seeking to discover effects of specific environmental insults such as oxidants at the cellular level have been done, and epidemiological studies have been initiated on the impacts of trace metals on human health. Theoretical studies in an attempt to develop a basis for assessing the stability of ecological systems are also being undertaken.

  12. Delay Analysis of GTS Bridging between IEEE 802.15.4 and IEEE 802.11 Networks for Healthcare Applications

    Science.gov (United States)

    Mišić, Jelena; (Sherman) Shen, Xuemin

    2009-01-01

    We consider interconnection of IEEE 802.15.4 beacon-enabled network cluster with IEEE 802.11b network. This scenario is important in healthcare applications where IEEE 802.15.4 nodes comprise patient's body area network (BAN) and are involved in sensing some health-related data. BAN nodes have very short communication range in order to avoid harming patient's health and save energy. Sensed data needs to be transmitted to an access point in the ward room using wireless technology with higher transmission range and rate such as IEEE 802.11b. We model the interconnected network where IEEE 802.15.4-based BAN operates in guaranteed time slot (GTS) mode, and IEEE 802.11b part of the bridge conveys GTS superframe to the 802.11b access point. We then analyze the network delays. Performance analysis is performed using EKG traffic from continuous telemetry, and we discuss the delays of communication due the increasing number of patients. PMID:19107184

  13. Delay Analysis of GTS Bridging between IEEE 802.15.4 and IEEE 802.11 Networks for Healthcare Applications.

    Science.gov (United States)

    Misić, Jelena; Sherman Shen, Xuemin

    2009-01-01

    We consider interconnection of IEEE 802.15.4 beacon-enabled network cluster with IEEE 802.11b network. This scenario is important in healthcare applications where IEEE 802.15.4 nodes comprise patient's body area network (BAN) and are involved in sensing some health-related data. BAN nodes have very short communication range in order to avoid harming patient's health and save energy. Sensed data needs to be transmitted to an access point in the ward room using wireless technology with higher transmission range and rate such as IEEE 802.11b. We model the interconnected network where IEEE 802.15.4-based BAN operates in guaranteed time slot (GTS) mode, and IEEE 802.11b part of the bridge conveys GTS superframe to the 802.11b access point. We then analyze the network delays. Performance analysis is performed using EKG traffic from continuous telemetry, and we discuss the delays of communication due the increasing number of patients.

  14. Simulasi Kinerja Jaringan Nirkabel IEEE-802.11a dan IEEE-802.11g Menggunakan NS-2

    Directory of Open Access Journals (Sweden)

    Helm Fitriawan

    2014-03-01

    Full Text Available Wireless network uses transmission media based on radio waves. This type of networks is mainly useddue to its efficiency and mobility in data exchanging. This paper reports the modeling and simulation of wirelessnetworks based on Cisco Aironet 1130ag access point devices with IEEE 802.11a and IEEE 802.11g standards. Themodeling and simulation are performed using network simulator version 2 (NS-2 that is installed on operationsystem Linux Ubuntu v.10.10. The NS-2 is commonly used and works well in numerous types of network simulation. From simulation, we obtain quality of service parameters by employing several simulation scenarios in terms ofnumber of nodes, distances, and packet data sizes. It can be concluded from simulation results that the IEEE 802.11gnetworks transfer data with better quality than those of IEEE 802.11a networks.  Furthermore, the IEEE 802.11gnetworks provide a higher throughput, with smaller amount of delay and packet loss percentage compared to thoseof IEEE 802.11a networks.

  15. IEEE Std 381-1977: IEEE standard criteria for type tests of Class 1E modules used in nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This document describes the basic requirements of a type test program with the objective of verifying that a module used as Class 1E equipment in a nuclear power generating station meets or exceeds its design specifications. This document is limited to class 1E modules from and including the sensor through the logic circuitry of the final actuation devices. Except for those that are part of a module, switchgear, cables, connections, motors, valve actuators, station batteries, and penetrations are not included and are covered by other IEEE documents. The purpose of this document is to supplement the procedures and requirements given in IEEE Std 323-1974 [24] for type testing Class 1E modules, thereby providing directions for establishment of a type test program which will obtain the required test data and yield the required documentation of test methods and results. This standard is structured to present to the user the principal performance characteristics and environmental parameters which must be considered in designing a type test program for any give Class 1E module. These modules range from tiny sensors to complete racks or cabinets full of equipment that may be located inside or outside containment. The Class 1E modules are required to perform their function before, during, or after, or all, any design basis event specified for the module. The vast variety of modules covered by this document precludes the listing here of specific requirements for each type test

  16. IEEE Std 101-1987: IEEE guide for the statistical analysis of thermal life test data

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This revision of IEEE Std 101-1972 describes statistical analyses for data from thermally accelerated aging tests. It explains the basis and use of statistical calculations for an engineer or scientist. Accelerated test procedures usually call for a number of specimens to be aged at each of several temperatures appreciably above normal operating temperatures. High temperatures are chosen to produce specimen failures (according to specified failure criteria) in typically one week to one year. The test objective is to determine the dependence of median life on temperature from the data, and to estimate, by extrapolation, the median life to be expected at service temperature. This guide presents methods for analyzing such data and for comparing test data on different materials

  17. Program director and chief resident perspectives on the educational environment of US radiation oncology programs.

    Science.gov (United States)

    Berriochoa, Camille; Weller, Michael; Berry, Danielle; Reddy, Chandana A; Koyfman, Shlomo; Tendulkar, Rahul

    Our goals were toexamine the educational approachesused at radiation oncology residency programs nationwide andto evaluate program director(PD) and chief resident (CR) perceptions of their educational environment. We distributed a survey regarding curricular structure via email toall identified US radiation oncology residency PDs and CRs. Pearson χ 2 test was used toevaluate whether differences existed between answers provided by the 2 study populations. The survey was disseminated to 200 individuals in 85 US residency programs: 49/85PDs(58%)and 74/115 (64%)CRs responded. More than one-half of PDs and CRs report that attending physicians discussed management, reviewed contours, and conducted mock oral board examinations with the residents. At nearly 50% of programs, the majority of teaching conferences use a lecture-based approach, whereas only 20% reported predominant utilization of the Socratic method. However, both PDs (63%) and CRs (49%) reported that Socratic teaching is more effective than didactic lectures (16% and 20%, respectively), with the remainder responding that they are equally effective. Teaching sessions were reported to be resident-led ≥75% of the time by 50% of CRs versus 18% of PDs (P = .002). Significantly more CRs than PDs felt that faculty-led teaching conferences were more effective than resident-led conferences (62% vs 26%, respectively; P Socratic-based teaching conferences. Increased communication between PDs and CRs can better align perceptions with educational goals. Copyright © 2016 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

  18. Interoperability in digital electrocardiography: harmonization of ISO/IEEE x73-PHD and SCP-ECG.

    Science.gov (United States)

    Trigo, Jesús D; Chiarugi, Franco; Alesanco, Alvaro; Martínez-Espronceda, Miguel; Serrano, Luis; Chronaki, Catherine E; Escayola, Javier; Martínez, Ignacio; García, José

    2010-11-01

    The ISO/IEEE 11073 (x73) family of standards is a reference frame for medical device interoperability. A draft for an ECG device specialization (ISO/IEEE 11073-10406-d02) has already been presented to the Personal Health Device (PHD) Working Group, and the Standard Communications Protocol for Computer-Assisted ElectroCardioGraphy (SCP-ECG) Standard for short-term diagnostic ECGs (EN1064:2005+A1:2007) has recently been approved as part of the x73 family (ISO 11073-91064:2009). These factors suggest the coordinated use of these two standards in foreseeable telecardiology environments, and hence the need to harmonize them. Such harmonization is the subject of this paper. Thus, a mapping of the mandatory attributes defined in the second draft of the ISO/IEEE 11073-10406-d02 and the minimum SCP-ECG fields is presented, and various other capabilities of the SCP-ECG Standard (such as the messaging part) are also analyzed from an x73-PHD point of view. As a result, this paper addresses and analyzes the implications of some inconsistencies in the coordinated use of these two standards. Finally, a proof-of-concept implementation of the draft x73-PHD ECG device specialization is presented, along with the conversion from x73-PHD to SCP-ECG. This paper, therefore, provides recommendations for future implementations of telecardiology systems that are compliant with both x73-PHD and SCP-ECG.

  19. 77 FR 48527 - National Customs Automation Program (NCAP) Test Concerning Automated Commercial Environment (ACE...

    Science.gov (United States)

    2012-08-14

    ... National Customs Automation Program (NCAP) test concerning the simplified entry functionality in the... DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection National Customs Automation Program (NCAP) Test Concerning Automated Commercial Environment (ACE) Simplified Entry: Modification of...

  20. IEEE recommended practices for seismic qualification of Class 1E equipment for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    The IEEE has developed this document to provide direction for developing programs to seismically qualify Class 1E equipment for nuclear power generating stations. It supplements IEEE Std 323-1974, IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations, which describes the basic requirements for equipment qualification. The Class 1E equipment to be qualified by produres or standards established by this document are of many forms, characteristics, and materials; therefore, the document presents many acceptable methods with the intent of permitting the user to make a judicious selection from among the various options. In making such a selection, the user should choose those that best meet a particular equipment's requirements. Further, in using this document as a specification for the purchase of equipment, the many options should also be recognized and the document invoked accordingly. It is recommended that the need for specific standards for the seismic qualifiction of particular kinds of equipment be evaluated by those responsible for such documents and that consideration be given to the application of particular methods from these documents which are most suitable

  1. Program Management Challenges in a Joint Service Environment

    National Research Council Canada - National Science Library

    Taneyhill, Dorothy E

    2007-01-01

    ... or modifications of the same design. The Interim Defense Acquisition Guidebook defines a Joint Program Management Office as any defense acquisition system, subsystem, component, or technology program that involves formal management...

  2. Devolution of the Economy and Environment Program for Southeast ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    EEPSEA). EEPSEA is the only program in Southeast Asia dedicated to helping economists and environmental researchers gain expertise in environmental economics research. Since its inception, the program has been managed by IDRC from its ...

  3. Fiber optics backbone for IEEE 802.3 networks

    Science.gov (United States)

    Shani, Ron

    1990-01-01

    In the last few years the IEEE 802.3 committee has developed fiber optics inter-repeater link standard called FOIRL. This standard defines the "Fiber Optics Media Access Unit" (FOMAU) which is used to connect two IEEE 802.3 repeaters that are up to 1Km apart. The IEEE 802.3 lOBaseF task force is currently standardizing a full F/O system in two directions: passive and active. The active approach is a compromise between the FOIRL (Asynchronous) approach and the Synchronous approach. As a result of this activity the IEEE 802.3 standard will define three different F/O interfaces and several devices that will not inter-operate. Such a standard will lower the credibility among the IEEE 802.3 user community, as customers will be confused amidst the many chapters and devices with no clear choice. This paper describes a method that can reduce the number of standards to two (passive and active), while proposing a solution for all the requirements of 802.3 F/O LAN. (The question of passive vs active approach will be discussed in this paper).

  4. Implicit Block ACK Scheme for IEEE 802.11 WLANs

    Science.gov (United States)

    Sthapit, Pranesh; Pyun, Jae-Young

    2016-01-01

    The throughput of IEEE 802.11 standard is significantly bounded by the associated Medium Access Control (MAC) overhead. Because of the overhead, an upper limit exists for throughput, which is bounded, including situations where data rates are extremely high. Therefore, an overhead reduction is necessary to achieve higher throughput. The IEEE 802.11e amendment introduced the block ACK mechanism, to reduce the number of control messages in MAC. Although the block ACK scheme greatly reduces overhead, further improvements are possible. In this letter, we propose an implicit block ACK method that further reduces the overhead associated with IEEE 802.11e’s block ACK scheme. The mathematical analysis results are presented for both the original protocol and the proposed scheme. A performance improvement of greater than 10% was achieved with the proposed implementation.

  5. IEEE guide for the analysis of human reliability

    International Nuclear Information System (INIS)

    Dougherty, E.M. Jr.

    1987-01-01

    The Institute of Electrical and Electronics Engineers (IEEE) working group 7.4 of the Human Factors and Control Facilities Subcommittee of the Nuclear Power Engineering Committee (NPEC) has released its fifth draft of a Guide for General Principles of Human Action Reliability Analysis for Nuclear Power Generating Stations, for approval of NPEC. A guide is the least mandating in the IEEE hierarchy of standards. The purpose is to enhance the performance of an human reliability analysis (HRA) as a part of a probabilistic risk assessment (PRA), to assure reproducible results, and to standardize documentation. The guide does not recommend or even discuss specific techniques, which are too rapidly evolving today. Considerable maturation in the analysis of human reliability in a PRA context has taken place in recent years. The IEEE guide on this subject is an initial step toward bringing HRA out of the research and development arena into the toolbox of standard engineering practices

  6. IEEE prize awarded to CERN PhD student

    CERN Multimedia

    2006-01-01

    Rafael Ballabriga Suñe is the recipient of the 2006 Institute of Electrical and Electronics Engineers, Inc. (IEEE) Nuclear and Plasma Sciences Society (NPSS)'s Student Paper Award. Ballabriga's winning paper reported on a prototype chip, which belongs to a new generation of single photon counting hybrid pixel detector readout chips - Medipix3. The award was presented by the deputy programme chair Vince Cianciolo (left) at the IEEE Nuclear Science Symposium held in San Diego on 29 October to 4 November.

  7. Programming Not Required: Skills and Knowledge for the Digital Library Environment

    Science.gov (United States)

    Howard, Katherine

    2010-01-01

    Education for Library and Information professionals in managing the digital environment has been a key topic for discussion within the LIS environment for some time. However, before designing and implementing a program for digital library education, it is prudent to ensure that the skills and knowledge required to work in this environment are…

  8. The Effect of Peer-Mentoring Program on Nursing Students’ Clinical Environment Stressors

    Directory of Open Access Journals (Sweden)

    F Sardari Kashkooli

    2014-01-01

    Results: There was a significant difference between stress scores before and after of the intervention in both groups (p=0.00. Mean difference of clinical environment stress factors in two groups were not statistically significant (p=0.99. Conclusions: Peer-mentoring program is not significant effective on clinical environment stress reduction. Key Words: Nursing Education, Peer Mentoring, Clinical Environment Stressors

  9. CONSIDERATIONS ON OBJECT-ORIENTED PROGRAMMING ENVIRONMENT AUTOCAD DRAWINGS

    OpenAIRE

    PINTILIE Alexandru; AVRAM Elena Rita

    2015-01-01

    In recent years, Low Cost CAD systems are widespread in the technical world. Currently, the highest-rated CAD system is AutoCAD due to the fact that in association with AutoLISP programming language covered a broad range of production needs. As a high-level programming language, AutoLISP provides an easy and efficient programming technique that leads to automation and parameterization of AutoCAD commands and reduces the time spending for designing the drawings. This paper aims to highlight th...

  10. Managing Complex Programs in a Post-LSI Environment

    National Research Council Canada - National Science Library

    Mockensturm, Jeffery J

    2008-01-01

    .... External forces played a major role in the evolution of these practices: A defense procurement holiday throughout the 1990s significantly reduced defense procurement spending and commensurate programs to manage...

  11. Multi-Language Programming Environments for High Performance Java Computing

    OpenAIRE

    Vladimir Getov; Paul Gray; Sava Mintchev; Vaidy Sunderam

    1999-01-01

    Recent developments in processor capabilities, software tools, programming languages and programming paradigms have brought about new approaches to high performance computing. A steadfast component of this dynamic evolution has been the scientific community’s reliance on established scientific packages. As a consequence, programmers of high‐performance applications are reluctant to embrace evolving languages such as Java. This paper describes the Java‐to‐C Interface (JCI) tool which provides ...

  12. Raspberry Pi as an environment for learning to program

    OpenAIRE

    Peternel, Darja

    2016-01-01

    The thesis discusses the projects which might encourage primary school children in the third triad to programme when the programming language Scratch becomes too restrictive. Lately, the answer has been to use proper programming languages and microcontrollers, which can be connected to camera, sensors and other devices. With this, children learn the basics of electrical engineering, and are only one step away from creating their own game or a small project. The thesis consists of assignments,...

  13. Editorial for the IEEE Transactions on Power Electronics, January 2009

    DEFF Research Database (Denmark)

    Blaabjerg, Frede

    2009-01-01

    I am entering the fourth year as the Editor in Chief of the IEEE TRANSACTIONS ON POWER ELECTRONICS. A position like this becomes more and more important for the technical field as publishing in a peer-reviewed highly ranked journal has influence on the industrial and academic career. It is a way...

  14. Eleanor McElwee and the Formation of IEEE PCS

    Science.gov (United States)

    Malone, Edward A.

    2015-01-01

    This article examines the historical professional project that created the Institute of Radio Engineers' Professional Group on Engineering Writing an Speech (IRE PGEWS)--now called the Institute of Electrical and Electronics Engineers' Professional Communication Society (IEEE PCS)--and recounts the group's early history in detail. It also traces…

  15. 0011-0030.Data Representation amp Computer Arithmetic6 IEEE ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; reso; 021; 01; 0011-0030.Data Representation amp Computer Arithmetic6 IEEE Standard Double Precision FormatIn.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News.

  16. Positive School and Classroom Environment: Precursors of Successful Implementation of Positive Youth Development Programs

    Directory of Open Access Journals (Sweden)

    Rachel C. F. Sun

    2008-01-01

    Full Text Available This case study was based on a school where the Tier 1 Program of the Project P.A.T.H.S. was integrated into the formal curriculum. In this case study, an interview with the school principal, vice-principal, and social worker was conducted in order to understand their perceptions of administrative arrangements and issues in the school, implementation characteristics, program effectiveness, program success, and overall impression. Results showed that several positive school and classroom attributes were conducive to program success, including positive school culture and belief in students' potentials, an inviting school environment, an encouraging classroom environment, high involvement of school administrative personnel, and systematic program arrangement.

  17. Aviation Safety Program Atmospheric Environment Safety Technologies (AEST) Project

    Science.gov (United States)

    Colantonio, Ron

    2011-01-01

    Engine Icing: Characterization and Simulation Capability: Develop knowledge bases, analysis methods, and simulation tools needed to address the problem of engine icing; in particular, ice-crystal icing Airframe Icing Simulation and Engineering Tool Capability: Develop and demonstrate 3-D capability to simulate and model airframe ice accretion and related aerodynamic performance degradation for current and future aircraft configurations in an expanded icing environment that includes freezing drizzle/rain Atmospheric Hazard Sensing and Mitigation Technology Capability: Improve and expand remote sensing and mitigation of hazardous atmospheric environments and phenomena

  18. Small Groups in Programmed Environments: Behavioral and Biological Interactions.

    Science.gov (United States)

    1983-04-01

    DISTRIBUTION STATEMENT (of the abettdre entered in Block 20. it differm Iroi Repot) IS. SUPPLEMENTARY NOTES The Pavlovian Journal of Bioloqical Science, in...Experimentation in Controlled Environments: Its Implications for Economic Behavior and Social Poligy Making. Toronto: Alcoholism and Drug Addiction

  19. IEEE Validation of the Continuing Education Achievement of Engineers Registry System. Procedures for Use with a CPT 8000 Word Processor and Communications Package.

    Science.gov (United States)

    Institute of Electrical and Electronics Engineers, Inc., New York, NY.

    The Institute of Electrical and Electronics Engineers (IEEE) validation program is designed to motivate persons practicing in electrical and electronics engineering to pursue quality technical continuing education courses offered by any responsible sponsor. The rapid acceptance of the validation program necessitated the additional development of a…

  20. XPRESS: eXascale PRogramming Environment and System Software

    Energy Technology Data Exchange (ETDEWEB)

    Porterfield, Allan Kennedy [Univ. of North Carolina, Chapel Hill, NC (United States); Fowler, Robert Joseph [Univ. of North Carolina, Chapel Hill, NC (United States)

    2016-08-31

    This is the final report for UNC activities as its part in the XStack program XPRESS project. A project-wide final report will be submitted by the project as a whole through Sandia National Laboratory when the contracts to the other participating organizations have reached their conclusion(s).

  1. Franchising in the banking environment : middle management program / L. Britz

    OpenAIRE

    Britz, Louise

    2005-01-01

    Franchising as a growth tool is becoming a very appealing business model which has highly successful examples in almost every business sector in the world. However in the banking environment, First National Bank has been the first bank to take the lead in South Africa by introducing the franchise concept to create value for its customers. Not all businesses are suitable to become franchises therefore the aim of this research was to establish what critical success factors can be considered as ...

  2. Airland Battlefield Environment (ALBE) Tactical Decision Aid (TDA) Demonstration Program,

    Science.gov (United States)

    1987-11-12

    Management System (DBMS) software, GKS graphics libraries, and user interface software. These components of the ATB system software architecture will be... knowlede base ano auqent the decision mak:n• process by providing infocr-mation useful in the formulation and execution of battlefield strategies...Topographic Laboratories as an Engineer. Ms. Capps is managing the software development of the AirLand Battlefield Environment (ALBE) geographic

  3. Compiler and Runtime Support for Programming in Adaptive Parallel Environments

    Science.gov (United States)

    1998-10-15

    noother job is waiting for resources, and use a smaller number of processors when other jobs needresources. Setia et al. [15, 20] have shown that such...15] Vijay K. Naik, Sanjeev Setia , and Mark Squillante. Performance analysis of job scheduling policiesin parallel supercomputing environments. In...on networks ofheterogeneous workstations. Technical Report CSE-94-012, Oregon Graduate Institute of Scienceand Technology, 1994.[20] Sanjeev Setia

  4. Developing Programs for the Business Environment - Economic Policies

    OpenAIRE

    Elena Ilie

    2014-01-01

    In early 2000, in Romania, there wasn’t much of a talk about stimulating business environment and in this case the SMEs (small and medium enterprises). After a transition period, various attempts to implement a financial and logistical support from the state were beginning to bear fruit with the year 2009 and take hold in 2011. Amid all legislative changes occurred, the Romanian state proves its effectiveness regarding Romanian entrepreneurs and especially young people, university graduates d...

  5. Environmental programs of the Department of Energy and Environment annual highlights

    International Nuclear Information System (INIS)

    Manowitz, B.

    1978-12-01

    Environmental Sciences is one of the four areas comprising the Department of Energy and Environment at Brookhaven National Laboratory. It carries out a wide range of activities in atmospheric sciences, environmental chemistry, oceanographic sciences, and land and freshwater environmental sciences. In general, these programs are concerned with identification and measurement of pollutants introduced into the environment by energy-related activities and the evaluation and prediction of the effects or potential effects of these pollutants on the environment. This highlights report for Environmental Programs covers the year 1978 and describes the objectives and funding levels of each of the programs, major accomplishments during the year, planned future activities, and current publications

  6. Environmental programs of the Department of Energy and Environment annual highlights

    Energy Technology Data Exchange (ETDEWEB)

    Manowitz, B

    1978-12-01

    Environmental Sciences is one of the four areas comprising the Department of Energy and Environment at Brookhaven National Laboratory. It carries out a wide range of activities in atmospheric sciences, environmental chemistry, oceanographic sciences, and land and freshwater environmental sciences. In general, these programs are concerned with identification and measurement of pollutants introduced into the environment by energy-related activities and the evaluation and prediction of the effects or potential effects of these pollutants on the environment. This highlights report for Environmental Programs covers the year 1978 and describes the objectives and funding levels of each of the programs, major accomplishments during the year, planned future activities, and current publications.

  7. Lowering the Barriers to Programming: A Survey of Programming Environments and Languages for Novice Programmers

    National Research Council Canada - National Science Library

    Kelleher, Caitlin; Pausch, Randy

    2003-01-01

    .... The systems are organized by their primary goal, either to teach programming or to use programming to empower their users, and then by the authors' approach to making learning to program easier for novice programmers...

  8. Development of a visual programming environment for the solution of elliptic questions

    International Nuclear Information System (INIS)

    Rehman, M.U.

    1999-01-01

    Recent trend in programming is changing from text based programming to visual programming. In the text-based environment, major amount of time is spent on program development and debugging. Visual programming environment makes the process of modeling and simulation more intuitive and creative. In this case the user spends more time on actual model building and later on the analysis phase of the design. The aim of this project is to design and develop a visual programming environment for the solution of the elliptical partial differential equations. The main core of this software package is based on advanced data structures including graph theory representations and generic trees for fast data linking and processing. Various case studies have been performed. The results are compared with the exact results. (author)

  9. Qualification test of Class 1E equipment based on IEEE323 Std 2003

    International Nuclear Information System (INIS)

    Kim, J. S.; Jung, S. C.; Kim, T. R.

    2004-01-01

    IEEE Standard for Qualifying Class 1E Equipment has been updated to 2003 edition since the issue of IEEE Std 323-1971, 1974, 1983. NRC approved the IEEE Std 323-1974 as Qualification standard of Class 1E Equipment in domestic nuclear power plant. IEEE Std 323-2003 was issued in September of 2003 and utility is waiting the approval of NRC. IEEE Std 323-2003 suggest a new qualification technique which adopts the condition monitoring. Performance of two transient during DBA test is no longer recommended in IEEE Std 323-2003. IEEE323 Std 2003 included a chapter of ''extension of Qualified life'' to make available the life extension of components during plant life extension. For the efficient control of preserving EQ in domestic nuclear power plant, IEEE323 Std 2003 is strongly recommended

  10. Genetic Programming for Sea Level Predictions in an Island Environment

    Directory of Open Access Journals (Sweden)

    M.A. Ghorbani

    2010-03-01

    Full Text Available Accurate predictions of sea-level are important for geodetic applications, navigation, coastal, industrial and tourist activities. In the current work, the Genetic Programming (GP and artificial neural networks (ANNs were applied to forecast half-daily and daily sea-level variations from 12 hours to 5 days ahead. The measurements at the Cocos (Keeling Islands in the Indian Ocean were used for training and testing of the employed artificial intelligence techniques. A comparison was performed of the predictions from the GP model and the ANN simulations. Based on the comparison outcomes, it was found that the Genetic Programming approach can be successfully employed in forecasting of sea level variations.

  11. Mathematical Analysis of EDCA's Performance on the Control Channel of an IEEE 802.11p WAVE Vehicular Network

    Directory of Open Access Journals (Sweden)

    Hussein T. Mouftah

    2010-01-01

    Full Text Available Wireless networks for vehicular environments are gaining increasing importance due to their ability to provide a means for stations on the roadside and radio units on board of vehicles to communicate and share safety-related information, thus reducing the probability of accidents and increasing the efficiency of the transportation system. With this goal in mind, the IEEE is currently developing the Wireless Access in Vehicular Environments (WAVE IEEE 802.11p standard. WAVE devices use the IEEE 802.11's Enhanced Distributed Channel Access (EDCA MAC protocol to compete for the transmission medium. This work proposes an analytical tool to evaluate the performance of EDCA under the specific conditions of the so-called control channel (CCH of a WAVE environment, including the particular EDCA parameter values and the fact that all safety-critical data frames are broadcasted. The protocol is modeled using Markov chains and results related to throughput, frame-error rate, buffer occupancy and delay are obtained under different traffic-load conditions. The main analysis is performed assuming that the CCH works continuously, and then an explanation is given as to the considerations that are needed to account for the fact that activity on the CCH is intermittent.

  12. Introduction to IEEE Std. 7-4.3.2 Annex D -- ''Qualification of existing commercial computers''

    International Nuclear Information System (INIS)

    Holmstrom, K.J.

    1995-01-01

    On September 15th of 1993 the IEEE standards board approved IEEE Std. 7-4.3.2-1993, IEEE Standard for Digital Computers in Safety Systems of Nuclear Power Generating Stations. This paper is an introduction to Annex D of this document which concerns the commercial grade dedication of existing computers or new non-1E computers

  13. IEEE C37.82-1987: IEEE standard for the qualification of switchgear assemblies for Class 1E applications in nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This document describes the methods and requirements for qualifying switchgear assemblies for indoor areas outside of the containment in nuclear power generating stations. These assemblies include (1) metal-enclosed low-voltage power circuit breaker switchgear assemblies, as defined in ANSI/IEEE C37.20.1-1987, (2) metal-clad switchgear assemblies, as defined in ANSI/IEEE C37.20.2-1987, (3) metal-enclosed bus, as defined in ANSI/IEEE C37.23-1987, and (4) metal-enclosed interrupter switchgear assemblies, as defined in ANSI/IEEE C37.20.3-1987. The purpose of this document is to provide amplification of the general requirements of ANSI/IEEE Std 323-1983 as they apply to the specific features of Class 1E switchgear assemblies. Where differences exist between this document and ANSI/IEEE Std 323-1983, this document takes precedence insofar as switchgear assemblies are concerned

  14. Protecting Human Health in a Changing Environment: 2018 Summer Enrichment Program

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) in Research Triangle Park, NC is offering a free 1-week Summer Enrichment Program to educate students about how the Agency protects human health and the environment.

  15. Applications of LabVIEW programming in a glovebox environment

    International Nuclear Information System (INIS)

    Evans, M.E.; Peralta, G.; Gray, D.

    1995-01-01

    When dealing with neutron radiation one of the keys to reducing worker exposure is to have as much distance and shielding between the radiation and the radiation worker as possible. Using a PC to control a process from a remote location allows the distance between the radiation worker and the radiation source to be increase. Increasing the distance at which radiation worker can control a process allows more shielding to be placed around the glovebox. There are many commercial packages that allow controlling remote processes with a PC. This paper shows how flexible the LabVIEW Graphical Programming Language can be in implementing the remote control of glovebox process

  16. XPRESS: eXascale PRogramming Environment and System Software

    Energy Technology Data Exchange (ETDEWEB)

    Brightwell, Ron [Louisiana State Univ., Baton Rouge, LA (United States); Sterling, Thomas [Louisiana State Univ., Baton Rouge, LA (United States); Koniges, Alice [Louisiana State Univ., Baton Rouge, LA (United States); Kaiser, Hartmut [Louisiana State Univ., Baton Rouge, LA (United States); Gabriel, Edgar [Louisiana State Univ., Baton Rouge, LA (United States); Porterfield, Allan [Louisiana State Univ., Baton Rouge, LA (United States); Malony, Allen [Louisiana State Univ., Baton Rouge, LA (United States)

    2017-07-14

    The XPRESS Project is one of four major projects of the DOE Office of Science Advanced Scientific Computing Research X-stack Program initiated in September, 2012. The purpose of XPRESS is to devise an innovative system software stack to enable practical and useful exascale computing around the end of the decade with near-term contributions to efficient and scalable operation of trans-Petaflops performance systems in the next two to three years; both for DOE mission-critical applications. To this end, XPRESS directly addresses critical challenges in computing of efficiency, scalability, and programmability through introspective methods of dynamic adaptive resource management and task scheduling.

  17. Environment Health & Safety Research Program. Organization and 1979-1980 Publications

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-01-01

    This document was prepared to assist readers in understanding the organization of Pacific Northwest Laboratory, and the organization and functions of the Environment, Health and Safety Research Program Office. Telephone numbers of the principal management staff are provided. Also included is a list of 1979 and 1980 publications reporting on work performed in the Environment, Health and Safety Research Program, as well as a list of papers submitted for publication.

  18. Application of high level programs in a controls environment

    International Nuclear Information System (INIS)

    Kost, C.J.; Mouat, M.; Dohan, D.A.

    1987-01-01

    Highly interactive display utilities, operating on a VAX/VMS computer system, have been usefully interfaced to the controls environment of the TRIUMF cyclotron. Machine data is acquired by a VAX-CAMAC interface, an is passed to these utilities in an efficient manner by memory mapping to global sections for on-line manipulation. The data can also be readily analyzed off-line by operators with the user-friendly command driven utilities OPDATA and PLOTDATA which permit the user to obtain graphics output on a variety of terminal and hardcopy devices using device independent metafiles. Sample applications show the usefulness of these utilities for a wide range of tasks, such as real-time simulation of trim-coil tuning on the beam phase history, and semi-on-line analysis of radial probe data

  19. Health Prevention Program: the cornerstone for a safe work environment

    Energy Technology Data Exchange (ETDEWEB)

    Flores-Andrade, Augusto; Benalcazar, Fernando L. [EnCanEcuador S.A., Quito (Ecuador)

    2004-07-01

    EnCana in Ecuador is deeply committed through the sustainable development by minimizing and controlling hazards, while contributing to the well being of the people and protecting the environment of the communities where we operate, the health and safety of our employees, as well as preventing any loss and ensuring business continuity. To ensure a safe work environment for all our employees and Contractors, the Company has conducted a complete Risk Evaluation, considering: physical, biological, chemical, ergonomics and psychosocial factors. Based on this Map of Risks, the exposure level and the age of the employee, the Medical Department established four different routines of medical exams (pre-occupational and occupational), which are conducted on a regular two years basis, or even in a shorter period of time, if required. Additionally, medical exams are conducted when an employee is transferred to a different position. All employees have their own records, which document their medical shape when enrolled, at any time while working, and when the person leaves the Company. This allows diagramming the history of employees, the following information: X Axis (horizontal) Age of the employee when enrolled, years (chronological) and position when the exams are conducted. Y Axis (vertical) Capability in terms of percentage, of different organs and physiology (audiometric, ears, lungs, etc.). All this information is processed by the EHS Department, which in conjunction with other departments, plan improvement Safety measures to avoid the exposure of the employees to those factors above mentioned, minimizing potential losses and reducing dramatically costs of accidents and absenteeism. Exactly the same concept is being implemented with Contractors, which must also comply with these requirements. Follow-up of all recommendations is conducted on a regular basis by the Employees, Contractors and Management (Executive) EHS Committees. (author)

  20. Proceedings of IEEE Machine Learning for Signal Processing Workshop XVI

    DEFF Research Database (Denmark)

    Larsen, Jan

    These proceedings contains refereed papers presented at the sixteenth IEEE Workshop on Machine Learning for Signal Processing (MLSP'2006), held in Maynooth, Co. Kildare, Ireland, September 6-8, 2006. This is a continuation of the IEEE Workshops on Neural Networks for Signal Processing (NNSP......). The name of the Technical Committee, hence of the Workshop, was changed to Machine Learning for Signal Processing in September 2003 to better reflect the areas represented by the Technical Committee. The conference is organized by the Machine Learning for Signal Processing Technical Committee...... the same standard as the printed version and facilitates the reading and searching of the papers. The field of machine learning has matured considerably in both methodology and real-world application domains and has become particularly important for solution of problems in signal processing. As reflected...

  1. IEEE prize awarded to CERN PhD student

    CERN Multimedia

    2006-01-01

    Rafael Ballabriga Suñe (right) receives the Student Paper Award. Rafael Ballabriga Suñe is the recipient of the 2006 Institute of Electrical and Electronics Engineers, Inc. (IEEE) Nuclear and Plasma Sciences Society (NPSS)'s Student Paper Award. Ballabriga's winning paper reported on a prototype chip, which belongs to a new generation of single photon counting hybrid pixel detector readout chips - Medipix3. The NPSS established this award in 2005 to encourage outstanding student contributions and greater student participation as principle or sole authors of papers. The prizes were presented at the IEEE Nuclear Science Symposium held in San Diego on 29 October to 4 November. The prototype chip was designed by Ballabriga based on ideas generated within the CERN Medipix team - part of the PH Microelectronics group. It could be used in various fields in the future, including medical imaging, neutron imaging, electron microscopy, radiation monitoring and other applications in high-energy physics. The novel aspe...

  2. IEEE 802.3 Fiber Optic Inter-Repeater Link

    Science.gov (United States)

    Tarrant, Peter J.

    1987-01-01

    This paper describes the implementation of a fiber optic inter-repeater link (FOIRL), used for connecting two remote copper segments of an IEEE 802.3 local area network. The rationale for the design, the signalling used and the collision detection mechanism is discussed. The evolution of the draft international standard for the FOIRL and the concurrence amongst various manufacturers is also presented. Finally some examples of typical applications, highlighting the ease of installation, are given.

  3. Basic security measures for IEEE 802.11 wireless networks

    OpenAIRE

    Sarmiento, Oscar P.; Guerrero, Fabio G.; Rey Argote, David

    2008-01-01

    This article presents a tutorial/discussion of three commonly-used IEEE 802.11 wireless network security standards: WEP, WPA and WPA2. A detailed analysis of the RC4 algorithm supporting WEP is presented, including its vulnerabilities. The WPA and WPA2 encryption protocols’ most relevant aspects and technical characteristics are reviewed for a comparative analysis of the three standards in terms of the security they provide. Special attention has been paid to WEP encryption by using an educat...

  4. 17th IEEE NPSS Real Time Conference – RT-2010

    CERN Multimedia

    Carlos Varandas

    2010-01-01

    Congress Centre of “Instituto Superior Técnico”, Lisboa, Portugal, 24-28 May, 2010 ABSTRACT SUBMISSION OPEN Abstract Submission Deadline: March 1st, 2010 Dear Sir/Madam, We are pleased to announce that abstract submission for the 17th IEEE NPSS Real Time Conference is now open on our web site. The deadline for submitting an abstract is 1st March 2010. Full conference details General Chairman

  5. Student Perceptions of Instructional Tools in Programming Logic: A Comparison of Traditional versus Alice Teaching Environments

    Science.gov (United States)

    Schultz, Leah

    2011-01-01

    This research investigates the implementation of the programming language Alice to teach computer programming logic to computer information systems students. Alice has been implemented in other university settings and has been reported to have many benefits including object-oriented concepts and an engaging and fun learning environment. In this…

  6. Media, Tourism, Environment, and Cultural Issues in Australia: A Case Study of a Study Abroad Program

    Science.gov (United States)

    Freedman, Eric

    2010-01-01

    A multidisciplinary study abroad program developed by a U.S. journalism school and cosponsored by a college of agriculture and natural resources interweaves the themes of mass media, tourism, environment, and cultural issues in Australia. This article traces the development and evolution of the faculty-led program and discusses its curriculum,…

  7. 76 FR 34246 - Automated Commercial Environment (ACE); Announcement of National Customs Automation Program Test...

    Science.gov (United States)

    2011-06-13

    ... Environment (ACE); Announcement of National Customs Automation Program Test of Automated Procedures for In... Customs Automation Program (NCAP) test relating to highway movements of commercial goods that are transported in-bond through the United States from one point in Canada to another point in Canada. The NCAP...

  8. Web Environment for Programming and Control of a Mobile Robot in a Remote Laboratory

    Science.gov (United States)

    dos Santos Lopes, Maísa Soares; Gomes, Iago Pacheco; Trindade, Roque M. P.; da Silva, Alzira F.; de C. Lima, Antonio C.

    2017-01-01

    Remote robotics laboratories have been successfully used for engineering education. However, few of them use mobile robots to to teach computer science. This article describes a mobile robot Control and Programming Environment (CPE) and its pedagogical applications. The system comprises a remote laboratory for robotics, an online programming tool,…

  9. The Effects of a Robot Game Environment on Computer Programming Education for Elementary School Students

    Science.gov (United States)

    Shim, Jaekwoun; Kwon, Daiyoung; Lee, Wongyu

    2017-01-01

    In the past, computer programming was perceived as a task only carried out by computer scientists; in the 21st century, however, computer programming is viewed as a critical and necessary skill that everyone should learn. In order to improve teaching of problem-solving abilities in a computing environment, extensive research is being done on…

  10. The USCG/environment Canada/ASTM standards development program

    International Nuclear Information System (INIS)

    Whittaker, H.

    1992-01-01

    Environment Canada's Emergencies Engineering Division (EED) has been charged, as a result of the Public Review Panel on Tanker Safety and Marine Emergency Response report, with increased R ampersand D in marine oil spills. This activity will, of necessity, include development of standards and guidelines for the testing and/or usage of oil spill cleanup equipment. The United States Coast Guard (USCG) has been charged with implementing the provisions of the Oil Pollution Act of 1990 (OPA-90), as it pertains to marine transportation vessels and facilities. Among the provisions are requirements for vessel and facility owners and operators to develop comprehensive response plans that specifically match response resources to spill removal requirements. Meeting the response plan provisions of OPA-90 requires common standards for testing, selecting and assigning resources to anticipated response needs and objectively evaluating response plans for adequacy. In August of 1991, the USCG OPA-90 office approached ASTM to determine the feasibility of developing standards through that organizations procedures. Meetings were then held between the OPA-90 staff and members of the ASTM Committee F-20 on Hazardous Substances and Oil Spill Response. An agreement was reached to commence standards development in the areas of: Barriers, Skimmers, Treating Agents, Pumps, Beach Clean-up, Sorbents, Bioremediation, In-situ Burning, Temporary Storage Devices, Communications, Remote Sensing. It was recognized that ASTM and other organizational standards existed in several of these areas, but there were those where none were known to exist. Standards development was, therefore, expected to be a complicated and time-consuming process. Both the USCG OPA-90 and EC/EED offices required standards to be developed quickly, without subverting the ASTM process. Mechanical containment and recovery was considered to be the primary area of concern for both groups

  11. A PROPOSED NOVEL ARCHITECTURE OF EC CONTROL SYSTEM USING IEEE 802.11n NETWORK AT ITER-INDIA GYROTRON TEST FACILITY

    Directory of Open Access Journals (Sweden)

    Deepak Mandge

    2017-06-01

    Full Text Available IEEE 802.11 Wi-Fi networks are increasingly becoming popular for its use in industrial applications. With the availability of recent amendments to IEEE 802.11 series of standards, particularly IEEE 802.11n, the adoption of Wi-Fi networks for process automation is gaining more focus and importance. The installation of Wireless networks naturally provides reduction in cable and its maintenance related costs, provides increased flexibility and mobility to enhance performance of industrial control system. The IEEE 802.11n supports parameterization that can be set for particular industrial applications and hence it has addressed to the aspects of timeliness and criticality to some extent. This paper proposes the use of IEEE 802.11n network to interconnect field instruments with Siemens PLC controller in harsh EMI/EMC environment. An application example is shown where the alternate control system architecture is developed in which non-critical and non-safety signals are communicated over Wi-Fi. While, for critical and safety signals, traditional hardwired signals methods can be implemented.

  12. Throughput analysis of the IEEE 802.4 token bus standard under heavy load

    Science.gov (United States)

    Pang, Joseph; Tobagi, Fouad

    1987-01-01

    It has become clear in the last few years that there is a trend towards integrated digital services. Parallel to the development of public Integrated Services Digital Network (ISDN) is service integration in the local area (e.g., a campus, a building, an aircraft). The types of services to be integrated depend very much on the specific local environment. However, applications tend to generate data traffic belonging to one of two classes. According to IEEE 802.4 terminology, the first major class of traffic is termed synchronous, such as packetized voice and data generated from other applications with real-time constraints, and the second class is called asynchronous which includes most computer data traffic such as file transfer or facsimile. The IEEE 802.4 token bus protocol which was designed to support both synchronous and asynchronous traffic is examined. The protocol is basically a timer-controlled token bus access scheme. By a suitable choice of the design parameters, it can be shown that access delay is bounded for synchronous traffic. As well, the bandwidth allocated to asynchronous traffic can be controlled. A throughput analysis of the protocol under heavy load with constant channel occupation of synchronous traffic and constant token-passing times is presented.

  13. Real-Time-Simulation of IEEE-5-Bus Network on OPAL-RT-OP4510 Simulator

    Science.gov (United States)

    Atul Bhandakkar, Anjali; Mathew, Lini, Dr.

    2018-03-01

    The Real-Time Simulator tools have high computing technologies, improved performance. They are widely used for design and improvement of electrical systems. The advancement of the software tools like MATLAB/SIMULINK with its Real-Time Workshop (RTW) and Real-Time Windows Target (RTWT), real-time simulators are used extensively in many engineering fields, such as industry, education, and research institutions. OPAL-RT-OP4510 is a Real-Time Simulator which is used in both industry and academia. In this paper, the real-time simulation of IEEE-5-Bus network is carried out by means of OPAL-RT-OP4510 with CRO and other hardware. The performance of the network is observed with the introduction of fault at various locations. The waveforms of voltage, current, active and reactive power are observed in the MATLAB simulation environment and on the CRO. Also, Load Flow Analysis (LFA) of IEEE-5-Bus network is computed using MATLAB/Simulink power-gui load flow tool.

  14. An overview of environment Canada's National Incinerator Testing and Evaluation Program (NITEP)

    International Nuclear Information System (INIS)

    Finkelstein, A.

    1991-01-01

    In response to the many concerns associated with incineration, Environment Canada established the National Incineration Testing and evaluation Program (NITEP) in 1984. It's mission was to assess the incineration process as a means for disposal of MSW in Canada. The program primarily focused on the environment and health impacts of MSW incinerators by determining how design and operating conditions can be modified to reduce emissions of concern. In addition to developing better measuring and monitoring methods, supporting ash residue management research programs, NITEP established four major field projects to develop the data base necessary for national guidelines. This paper presents a brief overview of the most significant field program findings over the past six years and the rationale for the Canadian Council of Ministers of the Environment (CCME) Operating and Emissions Guidelines for MSW Incinerators published in June of 1989. In addition an overview of the ash work completed to date, and work still underway, will be presented

  15. Improving delivery of a health-promoting-environments program: experiences from Queensland Health.

    Science.gov (United States)

    Dwyer, S

    1997-01-01

    The purpose of this paper is to outline the key components of a statewide multisite health-promoting-environments program. Contemporary health-promotion programs in settings such as schools, workplaces and hospitals use organisational development theory to address the health issues of the setting, including the physical environment, the organisational environment, and the specific health needs of the employees and consumers of the service. Program principles include management of each project by the participant organisation or site (for example, a school or workplace), using resources available within the organisation and the local community, voluntary participation, social justice and participant-based priority setting, and evaluation and monitoring. Adoption of these principles implies a shift in the role of the health worker from implementer to facilitator. Based on the experience of Queensland Health, it is proposed that the essential building blocks of the health-promoting-environments program are an intersectoral policy base, a model for action, training and resources, local facilitators, support from local organisations, a supportive network of sites, marketing of the program, and a state-based evaluation and monitoring system. The program in Queensland was able to develop a significant number of these components over the 1990-1996 period. In regard to evaluation, process measures can be built around the program components; however, further research is required for development of impact indicators and benchmarks on quality.

  16. Environment of symbolic and graphic programming for the SYMPATI-2 line processor

    International Nuclear Information System (INIS)

    Fernandez, Pascal

    1991-01-01

    This research thesis reports the development of a programming environment which can be easily used at all levels of development of an application in the field of image processing. The author first presents different programming environments by distinguishing, on the one hand, languages or environments which are not specific to a machine, and, on the other hand, languages or environments which are dedicated to a specialised parallel architecture. Then, after a recall of the structure of the line processor from an operational point of view, the author proposes a detailed presentation of the 4LP language, i.e. the layer 0 of the environment. The three other layers are then presented. They respectively comprise a high level symbolic language, a user-friendly and interactive graphic tool, and an interactive graphic tool for the development of applications from programme icons

  17. A new methodological development for solving linear bilevel integer programming problems in hybrid fuzzy environment

    Directory of Open Access Journals (Sweden)

    Animesh Biswas

    2016-04-01

    Full Text Available This paper deals with fuzzy goal programming approach to solve fuzzy linear bilevel integer programming problems with fuzzy probabilistic constraints following Pareto distribution and Frechet distribution. In the proposed approach a new chance constrained programming methodology is developed from the view point of managing those probabilistic constraints in a hybrid fuzzy environment. A method of defuzzification of fuzzy numbers using ?-cut has been adopted to reduce the problem into a linear bilevel integer programming problem. The individual optimal value of the objective of each DM is found in isolation to construct the fuzzy membership goals. Finally, fuzzy goal programming approach is used to achieve maximum degree of each of the membership goals by minimizing under deviational variables in the decision making environment. To demonstrate the efficiency of the proposed approach, a numerical example is provided.

  18. Proceedings IEEE Visualization Conference and IEEE Information Visualization Conference (VIS'07 and INFOVIS'07, Sacramento CA, USA, October 28-November 1, 2007)

    NARCIS (Netherlands)

    Chen, M.; Hansen, C.; North, C.; Pang, A.; Wijk, van J.J.

    2007-01-01

    These are the proceedings of the IEEE Visualization Conference 2007 (Vis 2007) and the IEEE Information Visualization Conference 2007 (InfoVis 2007) held during October 28 to November 1, 2007 in Sacramento, California. The power of using computing technology to create useful, effective imagery for

  19. Coexistence of IEEE 802.11b/g WLANs and IEEE 802.15.4 WSNs : Modeling and Protocol Enhancements

    NARCIS (Netherlands)

    Yuan, W.

    2011-01-01

    As an emerging short-range wireless technology, IEEE 802.15.4/ZigBee Wireless Sensor Networks (WSNs) are increasingly used in the fields of home control, industrial control, consumer electronics, energy management, building automation, telecom services, personal healthcare, etc. IEEE

  20. Specialty Engineering Supplement to IEEE-15288.1

    Science.gov (United States)

    2015-05-15

    receiver required to work in a dense EMI environment. (15) Any RF receiver with a burnout level of less than 30 dBm (1 mW). b. A summary of all...Defense Programs.  Shaw, B E, Systems Engineering Requirements and Products, Aerospace Report Number TR- 2013-00001. The Aerospace Corporation, El ...Missile Systems Center AIR FORCE SPACE COMMAND 483 N. Aviation Blvd. El Segundo, CA 91245 Attention: SMC/EN

  1. Efficient radiologic reading environment by using an open-source macro program as connection software.

    Science.gov (United States)

    Lee, Young Han

    2012-01-01

    The objectives are (1) to introduce an easy open-source macro program as connection software and (2) to illustrate the practical usages in radiologic reading environment by simulating the radiologic reading process. The simulation is a set of radiologic reading process to do a practical task in the radiologic reading room. The principal processes are: (1) to view radiologic images on the Picture Archiving and Communicating System (PACS), (2) to connect the HIS/EMR (Hospital Information System/Electronic Medical Record) system, (3) to make an automatic radiologic reporting system, and (4) to record and recall information of interesting cases. This simulation environment was designed by using open-source macro program as connection software. The simulation performed well on the Window-based PACS workstation. Radiologists practiced the steps of the simulation comfortably by utilizing the macro-powered radiologic environment. This macro program could automate several manual cumbersome steps in the radiologic reading process. This program successfully acts as connection software for the PACS software, EMR/HIS, spreadsheet, and other various input devices in the radiologic reading environment. A user-friendly efficient radiologic reading environment could be established by utilizing open-source macro program as connection software. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  2. Efficient radiologic reading environment by using an open-source macro program as connection software

    International Nuclear Information System (INIS)

    Lee, Young Han

    2012-01-01

    Purpose: The objectives are (1) to introduce an easy open-source macro program as connection software and (2) to illustrate the practical usages in radiologic reading environment by simulating the radiologic reading process. Materials and methods: The simulation is a set of radiologic reading process to do a practical task in the radiologic reading room. The principal processes are: (1) to view radiologic images on the Picture Archiving and Communicating System (PACS), (2) to connect the HIS/EMR (Hospital Information System/Electronic Medical Record) system, (3) to make an automatic radiologic reporting system, and (4) to record and recall information of interesting cases. This simulation environment was designed by using open-source macro program as connection software. Results: The simulation performed well on the Window-based PACS workstation. Radiologists practiced the steps of the simulation comfortably by utilizing the macro-powered radiologic environment. This macro program could automate several manual cumbersome steps in the radiologic reading process. This program successfully acts as connection software for the PACS software, EMR/HIS, spreadsheet, and other various input devices in the radiologic reading environment. Conclusion: A user-friendly efficient radiologic reading environment could be established by utilizing open-source macro program as connection software.

  3. [The marine coastal water monitoring program of the Italian Ministry of the Environment].

    Science.gov (United States)

    Di Girolamo, Irene

    2003-01-01

    The Ministry of the Environment carries out marine and coastal monitoring programs with the collaboration of the coastal Regions. The program in progress (2001-2003), on the basis of results of the previous one, has identified 73 particulary significant areas (57 critical areas and 16 control areas). The program investigates several parameters on water, plancton, sediments, mollusks and benthos with analyses fortnightly, six-monthly and annual. The main aim of these three year monitoring programs is to assess the quality of national marine ecosystem.

  4. CRITERIA OF LANGUAGE AND PROGRAMMING ENVIRONMENT SELECTION FOR USE IN THE CAPACITY OF EDUCATIONAL AIDS

    Directory of Open Access Journals (Sweden)

    Petro H. Shevchuk

    2010-09-01

    Full Text Available The role of educational aids is to a large degree treated to be determinative in provision with its efficiency. The languages and programming environments are stated in the article as those that belong to educational aids. The criteria and backgrounds of their selection for educational purpose at the lessons of programming at comprehensive school are treated in the article. The examples of principle characteristics comparison of Pascal and C# are also cited. The article points at the necessity of further analysis of programming languages sampling for use as educational aids in teaching programming.

  5. Exploring Environment-Intervention Fit: A Study of a Work Environment Intervention Program for the Care Sector

    Science.gov (United States)

    Aust, Birgit; Flyvholm, Mari-Ann

    2015-01-01

    Targeting occupational health and safety interventions to different groups of employees and sectors is important. The aim of this study was to explore the environment-intervention fit of a Danish psychosocial work environment intervention program for the residential and home care sector. Focus group interviews with employees and interviews with mangers were conducted at 12 selected workplaces and a questionnaire survey was conducted with managers at all 115 workplaces. The interventions enhanced the probability of employees experiencing more “good” work days, where they could make a difference to the lives of clients. The interventions may therefore be characterized as culturally compelling and having a good fit with the immediate work environment of employees. The interventions furthermore seemed to fit well with the wider organizational environment and with recent changes in the societal and economic context of workplaces. However, some workplaces had difficulties with involving all employees and adapting the interventions to the organization of work. The findings suggest that flexibility and a variety of strategies to involve all employees are important aspects, if interventions are to fit well with the care sector. The focus on employees' conceptualization of a “good” work day may be useful for intervention research in other sectors. PMID:26380356

  6. Exploring Environment-Intervention Fit: A Study of a Work Environment Intervention Program for the Care Sector

    Directory of Open Access Journals (Sweden)

    Louise Hardman Smith

    2015-01-01

    Full Text Available Targeting occupational health and safety interventions to different groups of employees and sectors is important. The aim of this study was to explore the environment-intervention fit of a Danish psychosocial work environment intervention program for the residential and home care sector. Focus group interviews with employees and interviews with mangers were conducted at 12 selected workplaces and a questionnaire survey was conducted with managers at all 115 workplaces. The interventions enhanced the probability of employees experiencing more “good” work days, where they could make a difference to the lives of clients. The interventions may therefore be characterized as culturally compelling and having a good fit with the immediate work environment of employees. The interventions furthermore seemed to fit well with the wider organizational environment and with recent changes in the societal and economic context of workplaces. However, some workplaces had difficulties with involving all employees and adapting the interventions to the organization of work. The findings suggest that flexibility and a variety of strategies to involve all employees are important aspects, if interventions are to fit well with the care sector. The focus on employees’ conceptualization of a “good” work day may be useful for intervention research in other sectors.

  7. From LDEF to a national Space Environment and Effects (SEE) program: A natural progression

    Science.gov (United States)

    Bowles, David E.; Calloway, Robert L.; Funk, Joan G.; Kinard, William H.; Levine, Arlene S.

    1995-02-01

    As the LDEF program draws to a close, it leaves in place the fundamental building blocks for a Space Environment and Effects (SEE) program. Results from LDEF data analyses and investigations now form a substantial core of knowledge on the long term effects of the space environment on materials, system and structures. In addition, these investigations form the basic structure of a critically-needed SEE archive and database system. An agency-wide effort is required to capture all elements of a SEE program to provide a more comprehensive and focused approach to understanding the space environment, determining the best techniques for both flight and ground-based experimentation, updating the models which predict both the environments and those effects on subsystems and spacecraft, and, finally, ensuring that this multitudinous information is properly maintained, and inserted into spacecraft design programs. Many parts and pieces of a SEE program already exist at various locations to fulfill specific needs. The primary purpose of this program, under the direction of the Office of Advanced Concepts and Technology (OACT) in NASA Headquarters, is to take advantage of these parts; apply synergisms where possible; identify and when possible fill-in gaps; coordinate and advocate a comprehensive SEE program. The SEE program must coordinate and support the efforts of well-established technical communities wherein the bulk of the work will continue to be done. The SEE program will consist of a NASA-led SEE Steering Committee, consisting of government and industry users, with the responsibility for coordination between technology developers and NASA customers; and Technical Working Groups with primary responsibility for program technical content in response to user needs. The Technical Working Groups are as follows: Materials and Processes; Plasma and Fields; Ionizing Radiation; Meteoroids and Orbital Debris; Neutral External Contamination; Thermosphere, Thermal, and Solar

  8. 15th IEEE International Conference on Intelligent Engineering Systems

    CERN Document Server

    Živčák, Jozef; Aspects of Computational Intelligence Theory and Applications

    2013-01-01

    This volume covers the state-of-the art of the research and development in various aspects of computational intelligence and gives some perspective directions of development. Except the traditional engineering areas that contain theoretical knowledge, applications, designs and projects, the book includes the area of use of computational intelligence in biomedical engineering. „Aspects of Computational Intelligence: Theory and Applications” is a compilation of carefully selected extended papers written on the basis of original contributions presented at the 15th IEEE International Conference on Intelligent Engineering Systems 2011, INES 2011 held at June 23.-26. 2011 in AquaCity Poprad, Slovakia.    

  9. Status of the IEEE P896 Future Backplane Bus

    International Nuclear Information System (INIS)

    Gustavson, D.B.

    1983-10-01

    The IEEE P896 Future Backplane Bus project has been influenced by and has influenced FASTBUS and several other contemporary bus designs. This paper summarizes the current status of that project, which is directed toward the needs of modern 32-bit microprocessor systems with multiple processors. Some of the technology developed for P896 will be important for future non-ECL implementations of FASTBUS and other buses. In particular, new bus drivers and receivers should greatly improve the performance and reliability of backplane buses and cable buses. The current status of the P896 serial bus is also summarized

  10. MathModelica - An Extensible Modeling and Simulation Environment with Integrated Graphics and Literate Programming

    OpenAIRE

    Fritzson, Peter; Gunnarsson, Johan; Jirstrand, Mats

    2002-01-01

    MathModelica is an integrated interactive development environment for advanced system modeling and simulation. The environment integrates Modelica-based modeling and simulation with graphic design, advanced scripting facilities, integration of program code, test cases, graphics, documentation, mathematical type setting, and symbolic formula manipulation provided via Mathematica. The user interface consists of a graphical Model Editor and Notebooks. The Model Editor is a graphical user interfa...

  11. Applying the National Industrial Security Program (NISP) in the laboratory environment

    International Nuclear Information System (INIS)

    Bruckner, D.G.

    1995-01-01

    With continuing changes in the world safeguards and security environment the effectiveness of many laboratory operations depends on correctly assessing the risk to its programs and developing protection technologies, research and concepts of operations being employed by the scientific community. This paper explores the opportunities afforded by the National Industrial Security Program (NISP) to uniformly and simply protect Laboratory security assets, sensitive and classified information and matter, during all aspects of a laboratory program. The developments in information systems, program security, physical security and access controls suggest an industrial security approach. This paper's overall objective is to indicate that the Laboratory environment is particularly well suited to take advantage being pursued by NISP and the performance objectives of the new DOE orders

  12. AutoMicromanager: A microscopy scripting toolkit for LABVIEW and other programming environments

    Science.gov (United States)

    Ashcroft, Brian Alan; Oosterkamp, Tjerk

    2010-11-01

    We present a scripting toolkit for the acquisition and analysis of a wide variety of imaging data by integrating the ease of use of various programming environments such as LABVIEW, IGOR PRO, MATLAB, SCILAB, and others. This toolkit is designed to allow the user to quickly program a variety of standard microscopy components for custom microscopy applications allowing much more flexibility than other packages. Included are both programming tools as well as graphical user interface classes allowing a standard, consistent, and easy to maintain scripting environment. This programming toolkit allows easy access to most commonly used cameras, stages, and shutters through the Micromanager project so the scripter can focus on their custom application instead of boilerplate code generation.

  13. AutoMicromanager: a microscopy scripting toolkit for LABVIEW and other programming environments.

    Science.gov (United States)

    Ashcroft, Brian Alan; Oosterkamp, Tjerk

    2010-11-01

    We present a scripting toolkit for the acquisition and analysis of a wide variety of imaging data by integrating the ease of use of various programming environments such as LABVIEW, IGOR PRO, MATLAB, SCILAB, and others. This toolkit is designed to allow the user to quickly program a variety of standard microscopy components for custom microscopy applications allowing much more flexibility than other packages. Included are both programming tools as well as graphical user interface classes allowing a standard, consistent, and easy to maintain scripting environment. This programming toolkit allows easy access to most commonly used cameras, stages, and shutters through the Micromanager project so the scripter can focus on their custom application instead of boilerplate code generation.

  14. The USERDA transport R and D program for environment and safety

    International Nuclear Information System (INIS)

    Sisler, J.A.

    1976-01-01

    This paper describes the U.S. Energy Research and Development Administration's (ERDA) transportation environment and safety research and development program for energy fuels and wastes, including background, current activities, and future plans. It will serve as an overview and integrating factor for the several related technical papers to be presented at this meeting which will enlarge on the detail of specific projects. The transportation R and D program provides for the environmental and safety review of transport systems and procedures; standards development; and package, vehicle, and systems testing for nuclear materials transport. A primary output of the program is the collection, processing, and dissemination of transport environment and safety data, shipment statistics, and technical information. Special transport projects which do not easily fit elsewhere in ERDA are usually done as a part of this program. (author)

  15. Bibliography of the Interagency Energy/Environment R and D Program

    Energy Technology Data Exchange (ETDEWEB)

    Jacoff, F.S. (ed.)

    1979-08-01

    The Interagency Energy/Environment Research and Development Program, which is comprised of more than a dozen federal agencies and departments, is coordinated by the Office of Energy, Minerals and Industry within EPA's Office of Research and Development. The Interagency Program integrates research efforts in two main categories: health and environmental effects of energy systems and development of environmental control technologies. This bibliography lists publications resulting from research and development (R and D) performed under the auspices of the Interagency Program. The publications contained herein range from the Program's most current R and D and date back to the Program's inception in 1975. It has been designed to be used with three companion documents, each of which explores different facets of the Program.

  16. Comparison and Analysis of IEEE 344 and IEC 60980 standards for harmonization of seismic qualification of safety-related equipment

    International Nuclear Information System (INIS)

    Lee, Young Ok; Kim, Jong Seog; Seo, Jeong Ho; Kim, Myung Jun

    2011-01-01

    The seismic qualification of safety related equipment in nuclear power plants should demonstrate an equipment's ability to perform its safety function during/or after the time it is subjected to the forces resulting from one SSE. In addition, the equipment must withstand the effects of a number of OBEs, preceding the SSE. IEEE 344 and IEC 60980 present the criteria for establishing procedures demonstrating that the Class 1E equipment can meet its performance requirement during seismic events. Currently, IEEE 344 is used for regulation of nuclear power plant in the United State whereas IEC 60980 is mainly used in Europe. In particular, NPPs of France and China apply with RCC-E and GB that are domestic standards, respectively. Equipment supplier and Utility have difficulties because of different applicable standards. Equipment supplier to export S/R components/equipment to other standard area performs additional seismic qualification. For example, equipment are qualifies according to IEC 60980, RCC-E, GB although they have been qualified in accordance with IEEE 344. Also, utility to attempt power up-rate, life extension of NPP constructed under rules of RCC-E such as Ulchin NPP 1 and 2 has similar difficulties. RCC-E endorses IEC 60980 and GB is almost same as IEC 60980 except minor difference of earthquake environment definition. Therefore this paper surveys the similarities and differences between IEEE 344 and IEC 60980. In addition, this paper considers how the two sets of standards may be used in a complementary fashion to be possible using one or the other standard area

  17. Delay efficient cooperation in public safety vehicular networks using LTE and IEEE 802.11p

    KAUST Repository

    Atat, Rachad

    2012-01-01

    Cooperative schemes for critical content distribution over vehicular networks are presented and analyzed. The first scheme is based on unicasting from the base station, whereas the second is based on threshold based multicasting. Long Term Evolution (LTE) is used for long range communications with the base station (BS) and 802.11p is considered for inter-vehicle collaboration on the short range. A high mobility environment with correlated shadowing is adopted. Both schemes are shown to outperform non-cooperative unicasting and multicasting, respectively, when the appropriate 802.11p power class is used. The first scheme achieves the best performance among the compared methods, and a practical approximation of that scheme is shown to be close to optimal performance. © 2012 IEEE.

  18. The Design and Pilot Evaluation of an Interactive Learning Environment for Introductory Programming Influenced by Cognitive Load Theory and Constructivism

    Science.gov (United States)

    Moons, Jan; De Backer, Carlos

    2013-01-01

    This article presents the architecture and evaluation of a novel environment for programming education. The design of this programming environment, and the way it is used in class, is based on the findings of constructivist and cognitivist learning paradigms. The environment is evaluated based on qualitative student and teacher evaluations and…

  19. The NASA/National Space Science Data Center trapped radiation environment model program, 1964 - 1991

    International Nuclear Information System (INIS)

    Vette, J.I.

    1991-11-01

    The major effort that NASA, initially with the help of the United States Air Force (USAF), carried out for 27 years to synthesize the experimental and theoretical results of space research related to energetic charged particles into a quantitative description of the terrestrial trapped radiation environment in the form of model environments is detailed. The effort is called the Trapped Radiation Environment Modeling Program (TREMP). In chapter 2 the historical background leading to the establishment of this program is given. Also, the purpose of this modeling program as established by the founders of the program is discussed. This is followed in chapter 3 by the philosophy and approach that was applied in this program throughout its lifetime. As will be seen, this philosophy led to the continuation of the program long after it would have expired. The highlights of the accomplishments are presented in chapter 4. A view to future possible efforts in this arena is given in chapter 5, mainly to pass on to future workers the differences that are perceived from these many years of experience. Chapter 6 is an appendix that details the chronology of the development of TREMP. Finally, the references, which document the work accomplished over these years, are presented in chapter 7

  20. A Study of IEEE 802.15.4 Security Framework for Wireless Body Area Networks

    Directory of Open Access Journals (Sweden)

    Kyung Sup Kwak

    2011-01-01

    Full Text Available A Wireless Body Area Network (WBAN is a collection of low-power and lightweight wireless sensor nodes that are used to monitor the human body functions and the surrounding environment. It supports a number of innovative and interesting applications, including ubiquitous healthcare and Consumer Electronics (CE applications. Since WBAN nodes are used to collect sensitive (life-critical information and may operate in hostile environments, they require strict security mechanisms to prevent malicious interaction with the system. In this paper, we first highlight major security requirements and Denial of Service (DoS attacks in WBAN at Physical, Medium Access Control (MAC, Network, and Transport layers. Then we discuss the IEEE 802.15.4 security framework and identify the security vulnerabilities and major attacks in the context of WBAN. Different types of attacks on the Contention Access Period (CAP and Contention Free Period (CFP parts of the superframe are analyzed and discussed. It is observed that a smart attacker can successfully corrupt an increasing number of GTS slots in the CFP period and can considerably affect the Quality of Service (QoS in WBAN (since most of the data is carried in CFP period. As we increase the number of smart attackers the corrupted GTS slots are eventually increased, which prevents the legitimate nodes to utilize the bandwidth efficiently. This means that the direct adaptation of IEEE 802.15.4 security framework for WBAN is not totally secure for certain WBAN applications. New solutions are required to integrate high level security in WBAN.

  1. A study of IEEE 802.15.4 security framework for wireless body area networks.

    Science.gov (United States)

    Saleem, Shahnaz; Ullah, Sana; Kwak, Kyung Sup

    2011-01-01

    A Wireless Body Area Network (WBAN) is a collection of low-power and lightweight wireless sensor nodes that are used to monitor the human body functions and the surrounding environment. It supports a number of innovative and interesting applications, including ubiquitous healthcare and Consumer Electronics (CE) applications. Since WBAN nodes are used to collect sensitive (life-critical) information and may operate in hostile environments, they require strict security mechanisms to prevent malicious interaction with the system. In this paper, we first highlight major security requirements and Denial of Service (DoS) attacks in WBAN at Physical, Medium Access Control (MAC), Network, and Transport layers. Then we discuss the IEEE 802.15.4 security framework and identify the security vulnerabilities and major attacks in the context of WBAN. Different types of attacks on the Contention Access Period (CAP) and Contention Free Period (CFP) parts of the superframe are analyzed and discussed. It is observed that a smart attacker can successfully corrupt an increasing number of GTS slots in the CFP period and can considerably affect the Quality of Service (QoS) in WBAN (since most of the data is carried in CFP period). As we increase the number of smart attackers the corrupted GTS slots are eventually increased, which prevents the legitimate nodes to utilize the bandwidth efficiently. This means that the direct adaptation of IEEE 802.15.4 security framework for WBAN is not totally secure for certain WBAN applications. New solutions are required to integrate high level security in WBAN.

  2. Extending Service Area of IEEE 802.11 Ad Hoc Networks

    Science.gov (United States)

    Choi, Woo-Yong

    2012-06-01

    According to the current IEEE 802.11 wireless LAN standards, IEEE 802.11 ad hoc networks have the limitation that all STAs (Stations) are in the one-hop transmission range of each other. In this paper, to alleviate the limitation of IEEE 802.11 ad hoc networks we propose the efficient method for selecting the most appropriate pseudo AP (Access Point) from among the set of ad hoc STAs and extending the service area of IEEE 802.11 ad hoc networks by the pseudo AP's relaying the internal traffic of IEEE 802.11 ad hoc networks. Numerical examples show that the proposed method significantly extends the service area of IEEE 802.11 ad hoc networks.

  3. Link Investigation of IEEE 802.15.4 Wireless Sensor Networks in Forests.

    Science.gov (United States)

    Ding, Xingjian; Sun, Guodong; Yang, Gaoxiang; Shang, Xinna

    2016-06-27

    Wireless sensor networks are expected to automatically monitor the ecological evolution and wildlife habits in forests. Low-power links (transceivers) are often adopted in wireless sensor network applications, in order to save the precious sensor energy and then achieve long-term, unattended monitoring. Recent research has presented some performance characteristics of such low-power wireless links under laboratory or outdoor scenarios with less obstacles, and they have found that low-power wireless links are unreliable and prone to be affected by the target environment. However, there is still less understanding about how well the low-power wireless link performs in real-world forests and to what extent the complex in-forest surrounding environments affect the link performances. In this paper, we empirically evaluate the low-power links of wireless sensors in three typical different forest environments. Our experiment investigates the performance of the link layer compatible with the IEEE 802.15.4 standard and analyzes the variation patterns of the packet reception ratio (PRR), the received signal strength indicator (RSSI) and the link quality indicator (LQI) under diverse experimental settings. Some observations of this study are inconsistent with or even contradict prior results that are achieved in open fields or relatively clean environments and thus, provide new insights both into effectively evaluating the low-power wireless links and into efficiently deploying wireless sensor network systems in forest environments.

  4. An Improved Cross-Layering Design for IPv6 Fast Handover with IEEE 802.16m Entry Before Break Handover

    Science.gov (United States)

    Kim, Ronny Yongho; Jung, Inuk; Kim, Young Yong

    IEEE 802.16m is an advanced air interface standard which is under development for IMT-Advanced systems, known as 4G systems. IEEE 802.16m is designed to provide a high data rate and a Quality of Service (QoS) level in order to meet user service requirements, and is especially suitable for mobilized environments. There are several factors that have great impact on such requirements. As one of the major factors, we mainly focus on latency issues. In IEEE 802.16m, an enhanced layer 2 handover scheme, described as Entry Before Break (EBB) was proposed and adopted to reduce handover latency. EBB provides significant handover interruption time reduction with respect to the legacy IEEE 802.16 handover scheme. Fast handovers for mobile IPv6 (FMIPv6) was standardized by Internet Engineering Task Force (IETF) in order to provide reduced handover interruption time from IP layer perspective. Since FMIPv6 utilizes link layer triggers to reduce handover latency, it is very critical to jointly design FMIPv6 with its underlying link layer protocol. However, FMIPv6 based on new handover scheme, EBB has not been proposed. In this paper, we propose an improved cross-layering design for FMIPv6 based on the IEEE 802.16m EBB handover. In comparison with the conventional FMIPv6 based on the legacy IEEE 802.16 network, the overall handover interruption time can be significantly reduced by employing the proposed design. Benefits of this improvement on latency reduction for mobile user applications are thoroughly investigated with both numerical analysis and simulation on various IP applications.

  5. Environment

    DEFF Research Database (Denmark)

    Valentini, Chiara

    2017-01-01

    The term environment refers to the internal and external context in which organizations operate. For some scholars, environment is defined as an arrangement of political, economic, social and cultural factors existing in a given context that have an impact on organizational processes and structures....... For others, environment is a generic term describing a large variety of stakeholders and how these interact and act upon organizations. Organizations and their environment are mutually interdependent and organizational communications are highly affected by the environment. This entry examines the origin...... and development of organization-environment interdependence, the nature of the concept of environment and its relevance for communication scholarships and activities....

  6. The Effects of Visual Cues and Learners' Field Dependence in Multiple External Representations Environment for Novice Program Comprehension

    Science.gov (United States)

    Wei, Liew Tze; Sazilah, Salam

    2012-01-01

    This study investigated the effects of visual cues in multiple external representations (MER) environment on the learning performance of novices' program comprehension. Program codes and flowchart diagrams were used as dual representations in multimedia environment to deliver lessons on C-Programming. 17 field independent participants and 16 field…

  7. 12th ACIS/IEEE International Conference on Computer Science and Information Science

    CERN Document Server

    2013-01-01

    This edited book presents scientific results of the 12th IEEE/ACIS International Conference on Computer and Information Science (ICIS 2013) which was held on June 16-20, 2013 in Toki Messe, Niigata, Japan. The aim of this conference was to bring together scientists, engineers, computer users, and students to share their experiences and exchange new ideas, research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them The conference organizers selected the best 20 papers from those papers accepted for presentation at the conference. The papers were chosen based on review scores submitted by members of the program committee, and underwent further rigorous rounds of review.    

  8. IEEE [Institute of Electrical and Electronics Engineers] standards and nuclear software quality engineering

    International Nuclear Information System (INIS)

    Daughtrey, T.

    1988-01-01

    Significant new nuclear-specific software standards have recently been adopted under the sponsorship of the American Nuclear Society and the American Society of Mechanical Engineers. The interest of the US Nuclear Regulatory Commission has also been expressed through their issuance of NUREG/CR-4640. These efforts all indicate a growing awareness of the need for thorough, referenceable expressions of the way to build in and evaluate quality in nuclear software. A broader professional perspective can be seen in the growing number of software engineering standards sponsored by the Institute of Electrical and Electronics Engineers (IEEE) Computer Society. This family of standards represents a systematic effort to capture professional consensus on quality practices throughout the software development life cycle. The only omission-the implementation phase-is treated by accepted American National Standards Institute or de facto standards for programming languages

  9. 3th IEEE/ACIS International Conference on Computer and Information Science

    CERN Document Server

    2015-01-01

    This edited book presents scientific results of the 13th IEEE/ACIS International Conference on Computer and Information Science (ICIS 2014) which was held on June 4-6, 2014 in Taiyuan, China. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The conference organizers selected the best papers from those papers accepted for presentation at the conference.  The papers were chosen based on review scores submitted by members of the program committee, and underwent further rigorous rounds of review. This publication captures 14 of the conference’s most promis...

  10. IEEE Standard for qualification of Class 1E lead storage batteries for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    This document describes qualification methods for Class 1E lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 279-1979 and IEEE Std 308-1978, can be demonstrated by using the procedures provided in this Standard in accordance with IEEE Std 323-1974. Battery sizing, maintenance, capacity testing, installation, charging equipment and consideration of other types batteries are beyond the scope of this Standard

  11. IEEE standard for qualification of class 1E lead storage batteries for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    IEEE Std 323-1974, Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations, was developed to provide guidance for demonstrating and documenting the adequacy of electrical equipment used in all Class 1E and interface systems. This standard, IEEE Std 535-1979, was developed to provide specific methods and type test procedures for lead storage batteries in reference to IEEE Std 323-1974

  12. Impact of a process improvement program in a production software environment: Are we any better?

    Science.gov (United States)

    Heller, Gerard H.; Page, Gerald T.

    1990-01-01

    For the past 15 years, Computer Sciences Corporation (CSC) has participated in a process improvement program as a member of the Software Engineering Laboratory (SEL), which is sponsored by GSFC. The benefits CSC has derived from involvement in this program are analyzed. In the environment studied, it shows that improvements were indeed achieved, as evidenced by a decrease in error rates and costs over a period in which both the size and the complexity of the developed systems increased substantially. The principles and mechanics of the process improvement program, the lessons CSC has learned, and how CSC has capitalized on these lessons are also discussed.

  13. Program to assess the effects of extraordinary environments on radioactive material shipping systems

    International Nuclear Information System (INIS)

    Sandoval, R.P.; Reese, R.T.

    1980-01-01

    The highlights of the Transportation System Safety Evaluation (TSSE) Program at Sandia National Laboratories are reviewed and the origins of the program and the relationships to other programs addressing safety concerns are outlined. The areas of current activity in the assessment of possible effects an intentional act or extreme environment could have on nuclear material shipping systems are described. Early information has been obtained on the formation of aerosols, and a significant body of experimentally determined source term data will be available for radiological consequence evaluations

  14. Run-Time and Compiler Support for Programming in Adaptive Parallel Environments

    Directory of Open Access Journals (Sweden)

    Guy Edjlali

    1997-01-01

    Full Text Available For better utilization of computing resources, it is important to consider parallel programming environments in which the number of available processors varies at run-time. In this article, we discuss run-time support for data-parallel programming in such an adaptive environment. Executing programs in an adaptive environment requires redistributing data when the number of processors changes, and also requires determining new loop bounds and communication patterns for the new set of processors. We have developed a run-time library to provide this support. We discuss how the run-time library can be used by compilers of high-performance Fortran (HPF-like languages to generate code for an adaptive environment. We present performance results for a Navier-Stokes solver and a multigrid template run on a network of workstations and an IBM SP-2. Our experiments show that if the number of processors is not varied frequently, the cost of data redistribution is not significant compared to the time required for the actual computation. Overall, our work establishes the feasibility of compiling HPF for a network of nondedicated workstations, which are likely to be an important resource for parallel programming in the future.

  15. Economic Security Environment and Implementation of Planning, Programming, Budgeting, Execution (PPBE) System in Georgia

    Science.gov (United States)

    2004-06-01

    Roy J. What Determines Economic Growth? Economic Review – Second Quarter 1993 [References: Barro (1991); Mankiw , Romer, and Well (1992); De Long...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release: distribution unlimited ECONOMIC SECURITY...DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE: Economic Security Environment and Implementation of Planning, Programming, Budgeting, Execution

  16. The Use of Engineering Design Concept for Computer Programming Course: A Model of Blended Learning Environment

    Science.gov (United States)

    Tritrakan, Kasame; Kidrakarn, Pachoen; Asanok, Manit

    2016-01-01

    The aim of this research is to develop a learning model which blends factors from learning environment and engineering design concept for learning in computer programming course. The usage of the model was also analyzed. This study presents the design, implementation, and evaluation of the model. The research methodology is divided into three…

  17. Notification: Preliminary Research on EPA's Design for the Environment Product Labeling Program OIG

    Science.gov (United States)

    Project #OPE-FY14-4012, November 06, 2013. The Office of Inspector General (OIG) is starting preliminary research on the U.S. Environmental Protection Agency’s (EPA’s) Design for the Environment (DfE) Product Labeling Program.

  18. Exploring the Lived Experiences of Program Managers Regarding an Automated Logistics Environment

    Science.gov (United States)

    Allen, Ronald Timothy

    2014-01-01

    Automated Logistics Environment (ALE) is a new term used by Navy and aerospace industry executives to describe the aggregate of logistics-related information systems that support modern aircraft weapon systems. The development of logistics information systems is not always well coordinated among programs, often resulting in solutions that cannot…

  19. Enriched Home Environment Program for Preschool Children with Autism Spectrum Disorders

    Science.gov (United States)

    Sood, Divya; Szymanski, Monika; Schranz, Caren

    2015-01-01

    This study discusses the impact of the Enriched Home Environment Program (EHEP) on participation in home activities among two children with ASD using case study methodology. EHEP involves occupational therapists to collaborate with families of children with ASD to educate them about the impact of factors that influence child's participation within…

  20. Assessment of the impacts of the French nuclear program on the environment

    International Nuclear Information System (INIS)

    Naudet, G.

    1994-01-01

    This paper is an assessment of the impact of the French nuclear program on investments, on electricity price, on electricity and energy demand and especially on environment. The impact on atmosphere pollution which is based on a macro economic long term model (called MELODY), particularly detailed for the energy sector, is outlined. (TEC). 10 figs., 1 tab., 4 refs

  1. Testing Algorithmic Skills in Traditional and Non-Traditional Programming Environments

    Science.gov (United States)

    Csernoch, Mária; Biró, Piroska; Máth, János; Abari, Kálmán

    2015-01-01

    The Testing Algorithmic and Application Skills (TAaAS) project was launched in the 2011/2012 academic year to test first year students of Informatics, focusing on their algorithmic skills in traditional and non-traditional programming environments, and on the transference of their knowledge of Informatics from secondary to tertiary education. The…

  2. Interviews with College Students: Evaluating Computer Programming Environments for Introductory Courses

    Science.gov (United States)

    Uysal, Murat Pasa

    2014-01-01

    Different methods, strategies, or tools have been proposed for teaching Object Oriented Programming (OOP). However, it is still difficult to introduce OOP to novice learners. The problem may be not only adopting a method or language, but also use of an appropriate integrated development environment (IDE). Therefore, the focus should be on the…

  3. Small-grants programs: lessons from community-based approaches to changing nutrition environments.

    Science.gov (United States)

    Johnson, Donna B; Smith, Lynne T; Bruemmer, Barbara

    2007-02-01

    Providing small grants to community organizations can be an effective way to encourage changes in the environment that support better nutrition. This is effective because these organizations can provide insights into their communities, ready-made relationships with community members, and the trust of the community. Small-grants programs are more likely to be successful when they are tailored to the needs of individual communities, led by organizations that have established reputations with the community, fully supported by the lead community organization, and engage local partners that complement the skills and resources of the lead organization. An evaluation of a small-grants program, Grants for Healthy Youth, found that grantees developed unique approaches to improving their community nutrition environments, gained experience and skills in program development, built partnerships, and received recognition for their project work. Grantees faced some common barriers, especially with program evaluation. Small-grants programs can be an effective way to improve community nutrition environments, but granting agencies need to provide effective technical assistance to communities throughout the process.

  4. Environmental Qualification Program for NPP Krsko

    International Nuclear Information System (INIS)

    Cerjak, J.; Klenovsek, P.; Pavsek, J.; Spalj, S.; Colovic, G.

    1998-01-01

    The functionality the equipment important to safety is deteriorated during its service due to ageing and harsh environment conditions. Since the environment is a potential for common cause failures, the purpose of Environmental Qualification (EQ) is to demonstrate the capability of safety-related equipment to perform its safety function in aged conditions and under extreme conditions after design bases event (DBE). EQ is one of the steps in licensing process according to US regulatory documents and standards (10CFR50.49, RG 1.89, NUREG-0588, IEEE-323). This paper presents the efforts in establishing the EQ program in the Krsko nuclear power plant. (author)

  5. Enhancement of the Work in Scia Engineer's Environment by Employment of XML Programming Language

    Directory of Open Access Journals (Sweden)

    Kortiš Ján

    2015-12-01

    Full Text Available The productivity of the work of engineers in the design of building structures by applying the rules of technical standards [1] has been increasing by using different software products for recent years. The software products offer engineers new possibilities to design different structures. However, there are problems especially for design of structures with similar static schemes as it is needed to follow the same work-steps. This can be more effective if the steps are done automatically by using a programming language for leading the processes that are done by software. The design process of timber structure which is done in the environment of Scia Engineer software is presented in the article. XML Programming Language is used for automatization of the design and the XML code is modified in the Excel environment by using VBA Programming language [2], [3].

  6. Editorial for IEEE Transactions on Power Electronics, January 2013

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Lehman, Brad

    2013-01-01

    should increase the impact factor of the IEEE TRANSACTIONS ON POWER ELECTRONICS (TPEL). In 2007, TPEL published 2600 pages, and it has gradually been increased to 4000 pages in 2011, 5000 pages in 2012, and 5500 pages are projected for 2013. We have decided to publish 12 printed issues so every month...... a new issue will be printed. A graph is provided showing the number of regular papers received in the past years as well as the number of published pages in the TPEL. Finally they note that in 2008, TPEL obtained a record high value for the impact factor (as shown in a figure) but in 2009 it was reduced...... the papers to be read over a longer time span; 2) Web of Science (ISI Thomsen Reuter) began to register new power electronics conferences in their database, and citations from conferences counts and contributes to a higher impact factor....

  7. Report of the 2017 IEEE Cyber Science and Technology Congress

    Directory of Open Access Journals (Sweden)

    Wenbing Zhao

    2017-12-01

    Full Text Available The modern digitized world has led to the emergence of a new paradigm on global information networks and infrastructures known as Cyberspace and the studies of Cybernetics, which bring seamless integration of physical, social and mental spaces. Cyberspace is becoming an integral part of our daily life from learning and entertainment to business and cultural activities. As expected, this whole concept of Cybernetics brings new challenges that need to be tackled. The 2017 IEEE Cyber Science and Technology Congress (CyberSciTech 2017 provided a forum for researchers to report their research findings and exchange ideas. The congress took place in Orlando, Florida, USA during 6–10 November 2017. Not counting poster papers, the congress accepted over fifty papers that are divided into nine sessions. In this report, we provide an overview of the research contributions of the papers in CyberSciTech 2017.

  8. WIH-based IEEE 802.11 ECG monitoring implementation.

    Science.gov (United States)

    Moein, A; Pouladian, M

    2007-01-01

    New wireless technologies make possible the implementation of high level integration wireless devices which allow the replacement of traditional large wired monitoring devices. It offers new functionalities to physicians and will reduce the costs. Among these functionalities, biomedical signals can be sent to other devices (PDA, PC . . . ) or processing centers, without restricting the patients' mobility. This article discusses the WIH (Ward-In-Hand) structure and the software required for its implementation before an operational example is presented with its results. The aim of this project is the development and implementation of a reduced size electrocardiograph based on IEEE 802.11 with high speed and more accuracy, which allows wireless monitoring of patients, and the insertion of the information into the Wi-Fi hospital networks.

  9. Basic security measures for IEEE 802.11 wireless networks

    Directory of Open Access Journals (Sweden)

    Oscar P. Sarmiento

    2008-05-01

    Full Text Available This article presents a tutorial/discussion of three commonly-used IEEE 802.11 wireless network security standards: WEP, WPA and WPA2. A detailed analysis of the RC4 algorithm supporting WEP is presented, including its vulnera-bilities. The WPA and WPA2 encryption protocols’ most relevant aspects and technical characteristics are reviewed for a comparative analysis of the three standards in terms of the security they provide. Special attention has been paid to WEP encryption by using an educational simulation tool written in C++ Builder for facilitating the unders-tanding of this protocol at academic level. Two practical cases of wireless security configurations using Cisco net-working equipment are also presented: configuring and enabling WPA-Personal and WPA2-Personal (these being security options used by TKIP and AES, respectively.

  10. The Appropriateness of Scratch and App Inventor as Educational Environments for Teaching Introductory Programming in Primary and Secondary Education

    Science.gov (United States)

    Papadakis, Stamatios; Kalogiannakis, Michail; Orfanakis, Vasileios; Zaranis, Nicholas

    2017-01-01

    Teaching programming is a complex task. The task is even more challenging for introductory modules. There is an ongoing debate in the teaching community over the best approach to teaching introductory programming. Visual block-based programming environments allow school students to create their own programs in ways that are more accessible than in…

  11. Rehabilitation Program Integrating Virtual Environment to Improve Orientation and Mobility Skills for People Who Are Blind.

    Science.gov (United States)

    Lahav, Orly; Schloerb, David W; Srinivasan, Mandayam A

    2015-01-01

    This paper presents the integration of a virtual environment (BlindAid) in an orientation and mobility rehabilitation program as a training aid for people who are blind. BlindAid allows the users to interact with different virtual structures and objects through auditory and haptic feedback. This research explores if and how use of the BlindAid in conjunction with a rehabilitation program can help people who are blind train themselves in familiar and unfamiliar spaces. The study, focused on nine participants who were congenitally, adventitiously, and newly blind, during their orientation and mobility rehabilitation program at the Carroll Center for the Blind (Newton, Massachusetts, USA). The research was implemented using virtual environment (VE) exploration tasks and orientation tasks in virtual environments and real spaces. The methodology encompassed both qualitative and quantitative methods, including interviews, a questionnaire, videotape recording, and user computer logs. The results demonstrated that the BlindAid training gave participants additional time to explore the virtual environment systematically. Secondly, it helped elucidate several issues concerning the potential strengths of the BlindAid system as a training aid for orientation and mobility for both adults and teenagers who are congenitally, adventitiously, and newly blind.

  12. IEEE Std 535-1979: IEEE standard for qualification of Class 1E lead storage batteries for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This document describes qualification methods for Class 1E lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 279-1971 and IEE Std 308-1978, can be demonstrated by using the procedures provided in this standard in accordance with IEEE Std 323-1974. Battery sizing, maintenance, capacity testing, installation, charging equipment and consideration of other type batteries are beyond the scope of this standard

  13. IEEE Std 535-1986: IEEE standard for qualification of Class 1E lead storage batteries for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This document describes qualification methods for Class 1E lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 308-1980 can be demonstrated by using the procedures provided in this standard in accordance with ANSI/IEEE Std 323-1983. Battery sizing, maintenance, capacity testing, installation, charging equipment, and consideration of other type batteries are beyond the scope of this standard

  14. Mechanical properties test program on structural materials in a sodium environment

    International Nuclear Information System (INIS)

    Natesan, K.; Chopra, O.K.; Kassner, T.F.

    1979-10-01

    This document describes in detail the ongoing and planned US Test program on the mechanical properties of sodium-exposed Type 316 austenitic stainless and Fe-2 1/4 Cr-1 Mo ferritic steels. The test program is based on the Development Requirement Specifications (DRS) established by the DOE/Clinch River Breeder Reactor Project (CRBRP) Program Office, the general need for the development of LMFBR structural-design criteria established by the Nuclear Systems Materials Handbook, and the need for a fundamental understanding of materials behavior in a sodium environment, which is generic to LMFBR systems. The planned test program is an extension of work based on current knowledge of sodium chemistry and the influence of sodium purity on the mechanical properties of structural materials

  15. ENERGY EFFICIENT BUILDINGS PROGRAM. CHAPTER FROM THE ENERGY AND ENVIRONMENT DIVISION ANNUAL REPORT 1979

    Energy Technology Data Exchange (ETDEWEB)

    Authors, Various

    1979-12-01

    The research reported in this volume was undertaken during FY 1979 within the Energy & Environment Division of the Lawrence Berkeley Laboratory. This volume will comprise a section of the Energy & Environment Division 1979 Annual Report, to be published in the summer of 1980. Work reported relate to: thermal performance of building envelopes; building ventilation and indoor air quality; a computer program for predicting energy use in buildings; study focused specifically on inherently energy intensive hospital buildings; energy efficient windows and lighting; potential for energy conservation and savings in the buildings sector; and evaluation of energy performance standards for residential buildings.

  16. A Power-Efficient Access Point Operation for Infrastructure Basic Service Set in IEEE 802.11 MAC Protocol

    Directory of Open Access Journals (Sweden)

    Hua Ye Ming

    2006-01-01

    Full Text Available Infrastructure-based wireless LAN technology has been widely used in today's personal communication environment. Power efficiency and battery management have been the center of attention in the design of handheld devices with wireless LAN capability. In this paper, a hybrid protocol named improved PCF operation is proposed, which intelligently chooses the access point- (AP- assisted DCF (distributed coordinator function and enhanced PCF (point coordinator function transmission mechanism of IEEE 802.11 protocol in an infrastructure-based wireless LAN environment. Received signal strength indicator (RSSI is used to determine the tradeoff between direct mobile-to-mobile transmission and transmission routed by AP. Based on the estimation, mobile stations can efficiently communicate directly instead of being routed through AP if they are in the vicinity of each other. Furthermore, a smart AP protocol is proposed as extension to the improved PCF operation by utilizing the historical end-to-end delay information to decide the waking up time of mobile stations. Simulation results show that using the proposed protocol, energy consumption of mobile devices can be reduced at the cost of slightly longer end-to-end packet delay compared to traditional IEEE 802.11 PCF protocol. However, in a non-time-critical environment, this option can significantly prolong the operation time of mobile devices.

  17. BabelFish-Tools for IEEE C37.118.2-compliant real-time synchrophasor data mediation

    Science.gov (United States)

    Almas, M. S.; Vanfretti, L.; Baudette, M.

    BabelFish (BF) is a real-time data mediator for development and fast prototyping of synchrophasor applications. BF is compliant with the synchrophasor data transmission IEEE Std C37.118.2-2011. BF establishes a TCP/IP connection with any Phasor Measurement Unit (PMU) or Phasor Data Concentrator (PDC) stream and parses the IEEE Std C37.118.2-2011 frames in real-time to provide access to raw numerical data in the LabVIEW environment. Furthermore, BF allows the user to select "data-of-interest" and transmit it to either a local or remote application using the User Datagram Protocol (UDP) in order to support both unicast and multicast communication. In the power systems Wide Area Monitoring Protection and Control (WAMPAC) domain, BF provides the first Free/Libre and Open Source Software (FLOSS) for the purpose of giving the users tools for fast prototyping of new applications processing PMU measurements in their chosen environment, thus liberating them of time consuming synchrophasor data handling and allowing them to develop applications in a modular fashion, without a need of a large and monolithic synchrophasor software environment.

  18. Empirical investigation on the dependence of TCP downstream throughput on SNR in an IEEE802.11b WLAN system

    Directory of Open Access Journals (Sweden)

    Ikponmwosa Oghogho

    2017-04-01

    Full Text Available The dependence of TCP downstream throughput (TCPdownT on signal to noise ratio (SNR in an IEEE802.11b WLAN system was investigated in various environments and varieties of QoS traffic. TCPdownT was measured for various SNR observed. An Infrastructure based IEEE802.11b WLAN system having networked computers on which measurement software were installed, was set up consecutively in various environments (open corridor, small offices with block walls and plaster boards and free space. Empirical models describing TCPdownT against SNR for different signal ranges (all ranges of signals, strong signals only, grey signals only and weak signals only were statistically generated and validated. As the SNR values changed from high (strong signals through low (grey signals to very low (weak signals, our results show a strong dependence of TCPdownT on the received SNR. Our models showed lower RMS errors when compared with other similar models. We observed RMS errors of 0.6734791 Mbps, 0.472209 Mbps, 0.9111563 Mbps and 0.5764460 Mbps for general (all SNR model, strong signals model, grey signals model and Weak signals model respectively. Our models will provide researchers and WLAN systems users with a tool to estimate the TCP downstream throughput in a real network in various environments by monitoring the received SNR.

  19. A formal analysis of ISO/IEEE P11073-20601 standard of medical device communication

    NARCIS (Netherlands)

    Goga, Nicolae; Costache, Stefania; Moldoveanu, Florica

    2009-01-01

    This article presents the formal work done for the ISO/IEEE P11073-20601 Draft Standard for Health informatics - Personal health device communication - Application profile Optimized exchange protocol. ISO/IEEE 11073 family defines standards for device communication between agents (e.g. blood

  20. Comparison Of Several Methods Of Implementing A Fiber Optic IEEE 802.3 Ethernet

    Science.gov (United States)

    Thompson, Geoffrey O.

    1987-01-01

    Several different methods of implementing a fiber optic version of IEEE 802.3 10BASE LANs have been proposed as a candidate for standardization by IEEE. There have been extensive discussions as to the relative merits and features of the several systems. This paper will discuss the merits of each for this particular application on a comparative basis.

  1. 0011-0030.How to make an abstract in IEEE Format for ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; reso; 021; 01; 0011-0030.How to make an abstract in IEEE Format for AvishkarMulticultural Night in IEEE R10 Student Congress 2009Performances.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook ...

  2. 0011-0030.What is IEEE 754 StandardHow to convert real number ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; reso; 021; 01; 0011-0030.What is IEEE 754 StandardHow to convert real number in binary format using IEEE 754 StandardAn.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News.

  3. A simple interface to computational fluid dynamics programs for building environment simulations

    Energy Technology Data Exchange (ETDEWEB)

    Broderick, III, C R; Chen, Q [Massachusetts Institute of Technology, Cambridge, MA (United States)

    2000-07-01

    It is becoming a popular practice for architects and HVAC engineers to simulate airflow in and around buildings by computational fluid dynamics (CFD) methods in order to predict indoor and outdoor environment. However, many CFD programs are crippled by a historically poor and inefficient user interface system, particularly for users with little training in numerical simulation. This investigation endeavors to create a simplified CFD interface (SCI) that allows architects and buildings engineers to use CFD without excessive training. The SCI can be easily integrated into new CFD programs. (author)

  4. Performance Analysis of IEEE 802.11 DCF and IEEE 802.11e EDCA in Non-saturation Condition

    Science.gov (United States)

    Kim, Tae Ok; Kim, Kyung Jae; Choi, Bong Dae

    We analyze the MAC performance of the IEEE 802.11 DCF and 802.11e EDCA in non-saturation condition where device does not have packets to transmit sometimes. We assume that a flow is not generated while the previous flow is in service and the number of packets in a flow is geometrically distributed. In this paper, we take into account the feature of non-saturation condition in standards: possibility of transmission performed without preceding backoff procedure for the first packet arriving at the idle station. Our approach is to model a stochastic behavior of one station as a discrete time Markov chain. We obtain four performance measures: normalized channel throughput, average packet HoL (head of line) delay, expected time to complete transmission of a flow and packet loss probability. Our results can be used for admission control to find the optimal number of stations with some constraints on these measures.

  5. Potential research money available from the Acid Deposition Program and Alberta Environment

    International Nuclear Information System (INIS)

    Primus, C.L.

    1992-01-01

    It is exceedingly difficult to demonstrate definitive long-term changes in animal health as a result of acid-forming emissions from sour gas wells. A summary is presented of current research in Alberta, followed by the potential for research funding by the Alberta Government/Industry Acid Deposition Program (ADRP). The Alberta Environment research budget consists of four programs in addition to the ADRP: acid deposition effects research in the Athabasca oil sands; western and northern Canada long-range transport of air pollutants; departmental monitoring; and inhalation toxicology and animal health. Animal health research, although a component of the acid deposition issue, is beyond the mandate of Alberta Environment, and the ADRP members committee does not forsee becoming involved in the long-term and complex research required to address the effects of acid-forming emissions on livestock. Funds for additional animal health research must come from other government departments and agencies whose mandate covers this area

  6. Achieving behavioral control with millisecond resolution in a high-level programming environment.

    Science.gov (United States)

    Asaad, Wael F; Eskandar, Emad N

    2008-08-30

    The creation of psychophysical tasks for the behavioral neurosciences has generally relied upon low-level software running on a limited range of hardware. Despite the availability of software that allows the coding of behavioral tasks in high-level programming environments, many researchers are still reluctant to trust the temporal accuracy and resolution of programs running in such environments, especially when they run atop non-real-time operating systems. Thus, the creation of behavioral paradigms has been slowed by the intricacy of the coding required and their dissemination across labs has been hampered by the various types of hardware needed. However, we demonstrate here that, when proper measures are taken to handle the various sources of temporal error, accuracy can be achieved at the 1 ms time-scale that is relevant for the alignment of behavioral and neural events.

  7. Development of programming techniques for behaviors of nuclear robot in real environment

    International Nuclear Information System (INIS)

    Tsukune, Hideo; Ogasawara, Tsukasa; Hirukawa, Hirohisa; Kitagaki, Kosei; Onda, Hiromu; Nakamura, Akira

    1999-01-01

    This study aims at establishment of synthetic autonomous technique on nuclear robot for a basic technique to realize remote control and automation of works in a nuclear plant by means of development on action programming function under actual environment. Before 1997 fiscal year, development of manipulation description system due to contact state transition series, development of mechanical assembly work instruction system using contact actuating system, development of new manipulator system with excellent controllability, development of quasi contact point monitoring method, and development of environmental model construction method using range finder and instruction tree, had been conducted. In 1997 fiscal year, probability of nuclear robot, on synthetic autonomous technique was shown by synthesis of many results on action programming planning function into a prototype system under an actual environment obtained by those developments. (G.K.)

  8. A Drawing and Multi-Representational Computer Environment for Beginners' Learning of Programming Using C: Design and Pilot Formative Evaluation

    Science.gov (United States)

    Kordaki, Maria

    2010-01-01

    This paper presents both the design and the pilot formative evaluation study of a computer-based problem-solving environment (named LECGO: Learning Environment for programming using C using Geometrical Objects) for the learning of computer programming using C by beginners. In its design, constructivist and social learning theories were taken into…

  9. A mixed-methods exploration of an environment for learning computer programming

    Directory of Open Access Journals (Sweden)

    Richard Mather

    2015-08-01

    Full Text Available A mixed-methods approach is evaluated for exploring collaborative behaviour, acceptance and progress surrounding an interactive technology for learning computer programming. A review of literature reveals a compelling case for using mixed-methods approaches when evaluating technology-enhanced-learning environments. Here, ethnographic approaches used for the requirements engineering of computing systems are combined with questionnaire-based feedback and skill tests. These are applied to the ‘Ceebot’ animated 3D learning environment. Video analysis with workplace observation allowed detailed inspection of problem solving and tacit behaviours. Questionnaires and knowledge tests provided broad sample coverage with insights into subject understanding and overall response to the learning environment. Although relatively low scores in programming tests seemingly contradicted the perception that Ceebot had enhanced understanding of programming, this perception was nevertheless found to be correlated with greater test performance. Video analysis corroborated findings that the learning environment and Ceebot animations were engaging and encouraged constructive collaborative behaviours. Ethnographic observations clearly captured Ceebot's value in providing visual cues for problem-solving discussions and for progress through sharing discoveries. Notably, performance in tests was most highly correlated with greater programming practice (p≤0.01. It was apparent that although students had appropriated technology for collaborative working and benefitted from visual and tacit cues provided by Ceebot, they had not necessarily deeply learned the lessons intended. The key value of the ‘mixed-methods’ approach was that ethnographic observations captured the authenticity of learning behaviours, and thereby strengthened confidence in the interpretation of questionnaire and test findings.

  10. VHDL-based programming environment for Floating-Gate analog memory cell

    Directory of Open Access Journals (Sweden)

    Carlos Alberto dos Reis Filho

    2005-02-01

    Full Text Available An implementation in CMOS technology of a Floating-Gate Analog Memory Cell and Programming Environment is presented. A digital closed-loop control compares a reference value set by user and the memory output and after cycling, the memory output is updated and the new value stored. The circuit can be used as analog trimming for VLSI applications where mechanical trimming associated with postprocessing chip is prohibitive due to high costs.

  11. Sample triage : an overview of Environment Canada's program

    Energy Technology Data Exchange (ETDEWEB)

    Lambert, P.; Goldthorp, M.; Fingas, M. [Environment Canada, Ottawa, ON (Canada). Emergencies Science and Technology Division, Environmental Technology Centre, Science and Technology Branch

    2006-07-01

    The Chemical, biological and radiological/nuclear Research and Technology Initiative (CRTI) is a program led by Canada's Department of National Defence in an effort to improve the capability of providing technical and analytical support in the event of a terrorist-related event. This paper summarized the findings from the CRTI Sample Triage Working Group and reviewed information on Environment Canada's triage program and its' mobile sample inspection facility that was designed to help examine samples of hazardous materials in a controlled environment to minimize the risk of exposure. A sample triage program is designed to deal with administrative, health and safety issues by facilitating the safe transfer of samples to an analytical laboratory. It refers to the collation of all results including field screening information, intelligence and observations for the purpose of prioritizing and directing the sample to the appropriate laboratory for analysis. A central component of Environment Canada's Emergency Response Program has been its capacity to respond on site during an oil or chemical spill. As such, the Emergencies Science and Technology Division has acquired a new mobile sample inspection facility in 2004. It is constructed to work with a custom designed decontamination unit and Ford F450 tow vehicle. The criteria and general design of the trailer facility was described. This paper also outlined the steps taken following a spill of hazardous materials into the environment so that potentially dangerous samples could be safety assessed. Several field trials will be carried out in order to develop standard operating procedures for the mobile sample inspection facility. 6 refs., 6 figs., 4 appendices.

  12. Structuring learning environments: Lessons from the organization of post-literacy programs

    Science.gov (United States)

    Easton, Peter A.

    1989-12-01

    New conceptual and historical work on the nature of literacy and information on several bellwether post-literacy efforts in developing countries furnish a basis for diagnosing some of the deficiencies in current approaches to post-literacy programming. The key issue is the design of a `literate environment'. Heretofore attention has been concentrated too exclusively on the reading materials and continuing education side of the problem, and insufficient attention has been given to the more critical and difficult aspect: ensuring adequate opportunities for the application of new literate skills. The availability of these functional opportunities is closely related to the possibilities for accumulation and reinvestment of economic surplus in the environment, and to the way in which the related activities are organized. Literacy programs can unite skills relevant to management of local resources with strategies of cultural, political or religious revitalization that mobilize people to use their human resources. They therefore continue to offer an attractive means of initiating a reinvestment spiral from limited initial capital. To realize these potentials at the post-literacy stage, however, requires planning post-literacy before literacy, broadening programs to address primary school leavers as well, and paying greatly increased attention to the economic and social structure of the learning environment.

  13. Generating GraphML XML Files for Graph Visualization of Architectures and Event Traces for the Monterey Phoenix Program

    Science.gov (United States)

    2012-09-01

    ebrary) Engineering Village 2 (Engineering Village 2) ENGnetBASE: Engineering Handbooks Online (CRCnetBASE) IEEE /IET Electronic Library ( IEEE Xplore ...Integrated Development Environment IEEE Institute of Electrical and Electronics Engineers ISCA International Society for Computers and Their Applications...Object-Oriented Systems. Addison-Wesley. Bowen, J., & Hinchey, M. (1995). Seven more myths of formal methods. Software, IEEE , 34-41. Brandes, U

  14. Developing the leadership skills of new graduates to influence practice environments: a novice nurse leadership program.

    Science.gov (United States)

    Dyess, Susan; Sherman, Rose

    2011-01-01

    The authors of the recently published Institute of Medicine on the Future of Nursing report emphasized the importance of preparing nurses to lead change to advance health care in the United States. Other scholars linked practice environments to safe quality care. In order for nurses to fully actualize this role in practice environments, they need to possess leadership skills sets that identify and respond to challenges faced. New nurses are no exception. This article presents a program with a 5-year track record that is designed to support transition and enhance the skill sets of leadership for new nurses in their first year of practice. Qualitative and quantitative evaluation measurements at baseline and postprogram provided data for evaluation of the first 4 cohorts in the program. Evaluative outcomes presented indicate that new nurses gained leadership and translational research skills that contributed to their ability to influence practice environments. Nonetheless, practice environments continue to need improvement and ongoing leadership from all levels of nursing must be upheld.

  15. A review of research programs related to the behavior of plutonium in the environment

    International Nuclear Information System (INIS)

    Bartram, B.W.; Wilkinson, M.J.

    1983-01-01

    Plutonium-fueled radioisotopic heat sources find application in a spectrum of space, terrestrial, and underseas applications to generate electrical power by thermoelectric or dynamic-cycle conversion. Such systems under postulated accident conditions could release radioactivity into the environment resulting in risks to the general population. The released radioactivity could be dispersed into various environmental media, such as air, soil, and water and interact with people through various exposure pathways leading to inhalation, ingestion, and external radiological doses and associated health effects. The authors developed short-term exposure (RISK II) and long-term exposure (RISK III) models for use in safety risk assessments of space missions utilizing plutonium-fueled electric power systems. To effectively use these models in risk assessments, representative input values must be selected for a spectrum of environmental transfer parameters that characterize the behavior of plutonium in the environment. The selection of appropriate transfer parameters to be used in a given analysis will depend on the accident scenarios to be modeled and the terrestrial and aquatic environments to be encountered. The authors reviewed the availability of plutonium environmental data for use in risk assessments and the status of research programs being conducted by various organizations related to the behavior of plutonium in the environment. This report summarizes the research programs presently being conducted at six Department of Energy Laboratories and makes recommendations on areas where further research is needed to fill gaps in the data necessary for risk assessments. 19 refs., 2 figs., 1 tab

  16. Online public health preparedness training programs: an evaluation of user experience with the technological environment.

    Science.gov (United States)

    Nambisan, Priya

    2010-01-01

    Several public health education programs and government agencies across the country have started offering virtual or online training programs in emergency preparedness for people who are likely to be involved in managing or responding to different types of emergency situations such as natural disasters, epidemics, bioterrorism, etc. While such online training programs are more convenient and cost-effective than traditional classroom-based programs, their success depends to a great extent on the underlying technological environment. Specifically, in an online technological environment, different types of user experiences come in to play-users' utilitarian or pragmatic experience, their fun or hedonic experience, their social experience, and most importantly, their usability experience-and these different user experiences critically shape the program outcomes, including course completion rates. This study adopts a multi-disciplinary approach and draws on theories in human computer interaction, distance learning theories, usability research, and online consumer behavior to evaluate users' experience with the technological environment of an online emergency preparedness training program and discusses its implications for the design of effective online training programs. . Data was collected using a questionnaire from 377 subjects who had registered for and participated in online public health preparedness training courses offered by a large public university in the Northeast. Analysis of the data indicates that as predicted, participants had higher levels of pragmatic and usability experiences compared to their hedonic and sociability experiences. Results also indicate that people who experienced higher levels of pragmatic, hedonic, sociability and usability experiences were more likely to complete the course(s) they registered for compared to those who reported lower levels. The study findings hold important implications for the design of effective online emergency

  17. User's guide of parallel program development environment (PPDE). The 2nd edition

    International Nuclear Information System (INIS)

    Ueno, Hirokazu; Takemiya, Hiroshi; Imamura, Toshiyuki; Koide, Hiroshi; Matsuda, Katsuyuki; Higuchi, Kenji; Hirayama, Toshio; Ohta, Hirofumi

    2000-03-01

    The STA basic system has been enhanced to accelerate support for parallel programming on heterogeneous parallel computers, through a series of R and D on the technology of parallel processing. The enhancement has been made through extending the function of the PPDF, Parallel Program Development Environment in the STA basic system. The extended PPDE has the function to make: 1) the automatic creation of a 'makefile' and a shell script file for its execution, 2) the multi-tools execution which makes the tools on heterogeneous computers to execute with one operation a task on a computer, and 3) the mirror composition to reflect editing results of a file on a computer into all related files on other computers. These additional functions will enhance the work efficiency for program development on some computers. More functions have been added to the PPDE to provide help for parallel program development. New functions were also designed to complement a HPF translator and a parallelizing support tool when working together so that a sequential program is efficiently converted to a parallel program. This report describes the use of extended PPDE. (author)

  18. User's guide of parallel program development environment (PPDE). The 2nd edition

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, Hirokazu; Takemiya, Hiroshi; Imamura, Toshiyuki; Koide, Hiroshi; Matsuda, Katsuyuki; Higuchi, Kenji; Hirayama, Toshio [Center for Promotion of Computational Science and Engineering, Japan Atomic Energy Research Institute, Tokyo (Japan); Ohta, Hirofumi [Hitachi Ltd., Tokyo (Japan)

    2000-03-01

    The STA basic system has been enhanced to accelerate support for parallel programming on heterogeneous parallel computers, through a series of R and D on the technology of parallel processing. The enhancement has been made through extending the function of the PPDF, Parallel Program Development Environment in the STA basic system. The extended PPDE has the function to make: 1) the automatic creation of a 'makefile' and a shell script file for its execution, 2) the multi-tools execution which makes the tools on heterogeneous computers to execute with one operation a task on a computer, and 3) the mirror composition to reflect editing results of a file on a computer into all related files on other computers. These additional functions will enhance the work efficiency for program development on some computers. More functions have been added to the PPDE to provide help for parallel program development. New functions were also designed to complement a HPF translator and a paralleilizing support tool when working together so that a sequential program is efficiently converted to a parallel program. This report describes the use of extended PPDE. (author)

  19. User's guide of parallel program development environment (PPDE). The 2nd edition

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, Hirokazu; Takemiya, Hiroshi; Imamura, Toshiyuki; Koide, Hiroshi; Matsuda, Katsuyuki; Higuchi, Kenji; Hirayama, Toshio [Center for Promotion of Computational Science and Engineering, Japan Atomic Energy Research Institute, Tokyo (Japan); Ohta, Hirofumi [Hitachi Ltd., Tokyo (Japan)

    2000-03-01

    The STA basic system has been enhanced to accelerate support for parallel programming on heterogeneous parallel computers, through a series of R and D on the technology of parallel processing. The enhancement has been made through extending the function of the PPDF, Parallel Program Development Environment in the STA basic system. The extended PPDE has the function to make: 1) the automatic creation of a 'makefile' and a shell script file for its execution, 2) the multi-tools execution which makes the tools on heterogeneous computers to execute with one operation a task on a computer, and 3) the mirror composition to reflect editing results of a file on a computer into all related files on other computers. These additional functions will enhance the work efficiency for program development on some computers. More functions have been added to the PPDE to provide help for parallel program development. New functions were also designed to complement a HPF translator and a paralleilizing support tool when working together so that a sequential program is efficiently converted to a parallel program. This report describes the use of extended PPDE. (author)

  20. Policy, environment, and worksite fitness program participation among financial enterprise employees in Taiwan.

    Science.gov (United States)

    Huang, Sheu-Jen; Hung, Wen-Chi

    2016-06-01

    This study explored the intertwined effects between the policies and regulations of the companies and personal background on participation in the physical fitness programs and leisure-time activities in financial enterprises. A total of 823 employees were selected as the sample with the multilevel stratification random-sampling technique. The response rate was 52.0%. Data were analyzed with descriptive statistics and hierarchical linear logistic regression. Thirty-two percent and 39% of the employees participated in the physical fitness programs and leisure-time activities, respectively. The factors affecting participation were categorized into intrapersonal factors, interpersonal processes, and primary groups, as well as institutional factors. In the interpersonal processes and primary groups level, higher family social support, more equipment in health promotion was associated with more participation in the programs. With the influence from the institutional level, it was found that health promotion policy amplified the relationship between employees' age and participation, but attenuated the relationship between education level and participation. Health promotion equipment in the institutes attenuated the relationship between colleague social support, family social support, and education level with program participation. Physical activity equipment in the community attenuated the relationship between family social support and program participation. The influential factors of social support and worksite environment could predict the employees' participation in the physical fitness programs and leisure-time physical activities. Health promotion policy and equipment attenuated the negative effects of nonparticipation as well as amplified the positive effects of participation.

  1. Overview of a radiation safety program in a district style medical environment

    International Nuclear Information System (INIS)

    Wilson, G.

    2006-01-01

    This paper provides an overview of the eight components of a radiation safety program in a large health care facility spread out over several campuses in a large geographic area in Nova Scotia. The main focus is based on those areas that are regulated by the Canadian Nuclear Safety Commission and generally encompass nuclear medicine and radiation therapy operations. X-ray operations are regulated provincially, but the general operational principles of an effective radiation safety program can be applied in all these areas. The main components covered include the set up of an organizational structure that operates separately from individual departments, general items expected from reports to corporate management or regulators, and some examples of the front-line expectations for those in individual departments. The review is not all encompassing, but should give organizations some insight of the magnitude of a radiation safety program in a district style environment. (author)

  2. Design Program in Graphic User Interface Environment for Automobile ER Devices

    Science.gov (United States)

    Lim, S. C.; Park, J. S.; Sohn, J. W.; Choi, S. B.

    This work presents a design and analysis program for vehicle devices utilizing an electrorheological (ER) fluid. The program is operated in graphic user interface (GUI) environment and the initial window is consisted of four subprogram modules which are related to ER shock absorber, ER seat damper, ER engine mount, and ER anti-lock brake system (ABS), respectively. In order to execute each module, both material properties and design parameters are to be chosen by the user. Then, the output display window shows the field-dependent performance characteristics to be considered as design criteria. In addition, control performances of the vehicle system equipped with ER devices are displayed in time and frequency domain. In order to demonstrate the effectiveness of the proposed program, ER shock absorber and ER ABS are designed and manufactured and their performance characteristics are evaluated.

  3. Virtual Property Manager: Providing a Simulated Learning Environment in a New University Program of Study

    Directory of Open Access Journals (Sweden)

    Andrew Carswell

    2007-08-01

    Full Text Available This paper relates the experience that students have while accessing Virtual Property Manager (VPM, a Web-based simulation learning tool designed to introduce students to a new discipline being offered at the university – Residential Property Management. The VPM simulation was designed in part to develop student interest in the new program. Results indicate that this simple simulation device did make a notable impact on student interest. Additionally, student acceptance and self-reported impact differed significantly based upon the delivery context. Adding a competitive reward element to the simulation experience improved student's evaluation of the software and self-reported interest in the field. Results indicate that educational simulation evaluation, acceptance, and performance may often be substantially influenced by the delivery context, rather than simply the program itself. Developers may do well to focus "outside the box" of program content to promote audience-specific delivery environments.

  4. Environment, Safety, Health, and Quality Plan for the Buried Waste Integrated Demonstration Program

    International Nuclear Information System (INIS)

    Walker, S.

    1994-05-01

    The Buried Waste Integrated Demonstration (BWID) is a program funded by the US Department of Energy Office of Technology Development. BWID supports the applied research, development, demonstration, testing, and evaluation of a suite of advanced technologies that together form a comprehensive remediation system for the effective and efficient remediation of buried waste. This document describes the Environment, Safety, Health, and Quality requirements for conducting BWID activities at the Idaho National Engineering Laboratory. Topics discussed in this report, as they apply to BWID operations, include Federal, State of Idaho, and Environmental Protection Agency regulations, Health and Safety Plans, Quality Program Plans, Data Quality Objectives, and training and job hazard analysis. Finally, a discussion is given on CERCLA criteria and System and Performance audits as they apply to the BWID Program

  5. An adaptive staircase procedure for the E-Prime programming environment.

    Science.gov (United States)

    Hairston, W David; Maldjian, Joseph A

    2009-01-01

    Many studies need to determine a subject's threshold for a given task. This can be achieved efficiently using an adaptive staircase procedure. While the logic and algorithms for staircases have been well established, the few pre-programmed routines currently available to researchers require at least moderate programming experience to integrate into new paradigms and experimental settings. Here, we describe a freely distributed routine developed for the E-Prime programming environment that can be easily integrated into any experimental protocol with only a basic understanding of E-Prime. An example experiment (visual temporal-order-judgment task) where subjects report the order of occurrence of two circles illustrates the behavior and consistency of the routine.

  6. Environmental program with operational cases to reduce risk to the marine environment significantly

    International Nuclear Information System (INIS)

    Cline, J.T.; Forde, R.

    1991-01-01

    In this paper Amoco Norway Oil Company's environmental program is detailed, followed by example operational programs and achievements aimed to minimize environmental risks to the marine environment at Valhall platform. With a corporate goal to be a leader in protecting the environment, the appropriate strategies and policies that form the basis of the environmental management system are incorporated in the quality assurance programs. Also, included in the program are necessary organizational structures, responsibilities of environmental affairs and line organization personnel, compliance procedures and a waste task force obliged to implement operations improvements. An internal environmental audit system has been initiated, in addition to corporate level audits, which, when communicated to the line organization closes the environmental management loop through experience feed back. Environmental projects underway are significantly decreasing the extent and/or risk of pollution from offshore activities. The cradle to grave responsibility is assumed with waste separated offshore and onshore followed by disposal in audited sites. A $5 MM program is underway to control produced oily solids and reduce oil in produced water aiming to less than 20 ppm. When oil-based mud is used in deeper hole sections, drill solids disposed at sea average less than 60 g oil/kg dry cuttings using appropriate shaker screens, and a washing/centrifuge system to remove fines. Certain oily liquid wastes are being injected down hole whereas previously they were burned using a mud burner. Finally, a program is underway with a goal to eliminate sea discharge of oil on cuttings through injection disposal of oily wastes, drilling with alternative muds such as a cationic water base mud, and/or proper onshore disposal of oily wastes

  7. IEEE Std 730 Software Quality Assurance: Supporting CMMI-DEV v1.3, Product and Process Quality Assurance

    Science.gov (United States)

    2011-05-27

    frameworks 4 CMMI-DEV IEEE / ISO / IEC 15288 / 12207 Quality Assurance ©2011 Walz IEEE Life Cycle Processes & Artifacts • Systems Life Cycle Processes...TAG to ISO TC 176 Quality Management • Quality: ASQ, work experience • Software: three books, consulting, work experience • Systems: Telecom & DoD...and IEEE 730 SQA need to align. The P730 IEEE standards working group has expanded the scope of the SQA process standard to align with IS 12207

  8. Path loss variation of on-body UWB channel in the frequency bands of IEEE 802.15.6 standard.

    Science.gov (United States)

    Goswami, Dayananda; Sarma, Kanak C; Mahanta, Anil

    2016-06-01

    The wireless body area network (WBAN) has gaining tremendous attention among researchers and academicians for its envisioned applications in healthcare service. Ultra wideband (UWB) radio technology is considered as excellent air interface for communication among body area network devices. Characterisation and modelling of channel parameters are utmost prerequisite for the development of reliable communication system. The path loss of on-body UWB channel for each frequency band defined in IEEE 802.15.6 standard is experimentally determined. The parameters of path loss model are statistically determined by analysing measurement data. Both the line-of-sight and non-line-of-sight channel conditions are considered in the measurement. Variations of parameter values with the size of human body are analysed along with the variation of parameter values with the surrounding environments. It is observed that the parameters of the path loss model vary with the frequency band as well as with the body size and surrounding environment. The derived parameter values are specific to the particular frequency bands of IEEE 802.15.6 standard, which will be useful for the development of efficient UWB WBAN system.

  9. Growing Community: The Impact of the Stephanie Alexander Kitchen Garden Program on the Social and Learning Environment in Primary Schools

    Science.gov (United States)

    Block, Karen; Gibbs, Lisa; Staiger, Petra K.; Gold, Lisa; Johnson, Britt; Macfarlane, Susie; Long, Caroline; Townsend, Mardie

    2012-01-01

    This article presents results from a mixed-method evaluation of a structured cooking and gardening program in Australian primary schools, focusing on program impacts on the social and learning environment of the school. In particular, we address the Stephanie Alexander Kitchen Garden Program objective of providing a pleasurable experience that has…

  10. Microworlds, Games, Animations, Mobile Apps, Puzzle Editors and More: What Is Important for an Introductory Programming Environment?

    Science.gov (United States)

    Xinogalos, Stelios; Satratzemi, Maya; Malliarakis, Christos

    2017-01-01

    Teaching and learning programming constitutes a challenge. Although several teaching approaches and programming tools have been proposed, it seems that they have limited impact on classroom practice. This article investigates students' perceptions on five educational programming environments that are widely used and the features that any…

  11. IEEE 802.11ah: A Technology to Face the IoT Challenge.

    Science.gov (United States)

    Baños-Gonzalez, Victor; Afaqui, M Shahwaiz; Lopez-Aguilera, Elena; Garcia-Villegas, Eduard

    2016-11-22

    Since the conception of the Internet of things (IoT), a large number of promising applications and technologies have been developed, which will change different aspects in our daily life. This paper explores the key characteristics of the forthcoming IEEE 802.11ah specification. This future IEEE 802.11 standard aims to amend the IEEE 802.11 legacy specification to support IoT requirements. We present a thorough evaluation of the foregoing amendment in comparison to the most notable IEEE 802.11 standards. In addition, we expose the capabilities of future IEEE 802.11ah in supporting different IoT applications. Also, we provide a brief overview of the technology contenders that are competing to cover the IoT communications framework. Numerical results are presented showing how the future IEEE 802.11ah specification offers the features required by IoT communications, thus putting forward IEEE 802.11ah as a technology to cater the needs of the Internet of Things paradigm.

  12. 48 CFR 52.223-16 - IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false IEEE 1680 Standard for the... CONTRACT CLAUSES Text of Provisions and Clauses 52.223-16 IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products. As prescribed in 23.706(b)(1), insert the following clause: IEEE...

  13. An Asynchronous IEEE Floating-Point Arithmetic Unit

    Directory of Open Access Journals (Sweden)

    Joel R. Noche

    2007-12-01

    Full Text Available An asynchronous floating-point arithmetic unit is designed and tested at the transistor level usingCadence software. It uses CMOS (complementary metal oxide semiconductor and DCVS (differentialcascode voltage switch logic in a 0.35 µm process using a 3.3 V supply voltage, with dual-rail data andsingle-rail control signals using four-phase handshaking.Using 17,085 transistors, the unit handles single-precision (32-bit addition/subtraction, multiplication,division, and remainder using the IEEE 754-1985 Standard for Binary Floating-Point Arithmetic, withrounding and other operations to be handled by separate hardware or software. Division and remainderare done using a restoring subtractive algorithm; multiplication uses an additive algorithm. Exceptionsare noted by flags (and not trap handlers and the output is in single-precision.Previous work on asynchronous floating-point arithmetic units have mostly focused on single operationssuch as division. This is the first work to the authors' knowledge that can perform floating-point addition,multiplication, division, and remainder using a common datapath.

  14. Annual highlights, Environmental Programs of the Department of Energy and Environment

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    Brief summaries are presented of some 35 individual programs covering a wide range of activities in the atmospheric, oceanographic, and terrestrial ecology areas. In general, these programs are involved with the study of pollutants resulting from the production of energy and their effects or potential effects on the environment. Programs include meteorology and plume dispersion, with emphasis on tracing plumes from the tall stacks of fossil-fuel burning power plants, and implementation of MAP3S (the Multistate Atmospheric Power Production Pollution Study), including both field and modeling studies related to atmospheric pollutants in the Northeastern United States, the meteorology of the coastal land-sea interface, the development of long-distance tracer systems for following movements of air masses, the measurement of a series of pollutants at ambient levels in real time, and laboratory and field studies on the collection and behavior of aerosol particulates, including work on the speciation and quantification of sulfate particulates. The objective of programs in oceanographic sciences is to assess the potential impact of energy-related activities (reactor releases, oil spills, etc.) on the Northeast coastal zone and its biota. A capability for the study of environmental virology has been established. Another major program is the study of the effects of acid rain on forest ecosystems and on selected crops.

  15. Annual highlights, Environmental Programs of the Department of Energy and Environment

    International Nuclear Information System (INIS)

    1977-12-01

    Brief summaries are presented of some 35 individual programs covering a wide range of activities in the atmospheric, oceanographic, and terrestrial ecology areas. In general, these programs are involved with the study of pollutants resulting from the production of energy and their effects or potential effects on the environment. Programs include meteorology and plume dispersion, with emphasis on tracing plumes from the tall stacks of fossil-fuel burning power plants, and implementation of MAP3S (the Multistate Atmospheric Power Production Pollution Study), including both field and modeling studies related to atmospheric pollutants in the Northeastern United States, the meteorology of the coastal land-sea interface, the development of long-distance tracer systems for following movements of air masses, the measurement of a series of pollutants at ambient levels in real time, and laboratory and field studies on the collection and behavior of aerosol particulates, including work on the speciation and quantification of sulfate particulates. The objective of programs in oceanographic sciences is to assess the potential impact of energy-related activities (reactor releases, oil spills, etc.) on the Northeast coastal zone and its biota. A capability for the study of environmental virology has been established. Another major program is the study of the effects of acid rain on forest ecosystems and on selected crops

  16. Comparison and Analysis of ISO/IEEE 11073, IHE PCD-01, and HL7 FHIR Messages for Personal Health Devices.

    Science.gov (United States)

    Lee, Sungkee; Do, Hyoungho

    2018-01-01

    Increasing use of medical devices outside of healthcare facilities inevitably requires connectivity and interoperability between medical devices and healthcare information systems. To this end, standards have been developed and used to provide interoperability between personal health devices (PHDs) and external systems. ISO/IEEE 11073 standards and IHE PCD-01 standard messages have been used the most in the exchange of observation data of health devices. Recently, transmitting observation data using the HL7 FHIR standard has been devised in the name of DoF (Devices on FHIR) and adopted very fast. We compare and analyze these standards and suggest that which standard will work best at the different environments of device usage. We generated each message/resource of the three standards for observed vital signs from blood pressure monitor and thermometer. Then, the size, the contents, and the exchange processes of these messages are compared and analyzed. ISO/IEEE 11073 standard message has the smallest data size, but it has no ability to contain the key information, patient information. On the other hand, PCD-01 messages and FHIR standards have the fields for patient information. HL7 DoF standards provide reusing of information unit known as resource, and it is relatively easy to parse DoF messages since it uses widely known XML and JSON. ISO/IEEE 11073 standards are suitable for devices having very small computing power. IHE PCD-01 and HL7 DoF messages can be used for the devices that need to be connected to hospital information systems that require patient information. When information reuse is frequent, DoF is advantageous over PCD-01.

  17. PABLM: a computer program to calculate accumulated radiation doses from radionuclides in the environment

    International Nuclear Information System (INIS)

    Napier, B.A.; Kennedy, W.E. Jr.; Soldat, J.K.

    1980-03-01

    A computer program, PABLM, was written to facilitate the calculation of internal radiation doses to man from radionuclides in food products and external radiation doses from radionuclides in the environment. This report contains details of mathematical models used and calculational procedures required to run the computer program. Radiation doses from radionuclides in the environment may be calculated from deposition on the soil or plants during an atmospheric or liquid release, or from exposure to residual radionuclides in the environment after the releases have ended. Radioactive decay is considered during the release of radionuclides, after they are deposited on the plants or ground, and during holdup of food after harvest. The radiation dose models consider several exposure pathways. Doses may be calculated for either a maximum-exposed individual or for a population group. The doses calculated are accumulated doses from continuous chronic exposure. A first-year committed dose is calculated as well as an integrated dose for a selected number of years. The equations for calculating internal radiation doses are derived from those given by the International Commission on Radiological Protection (ICRP) for body burdens and MPC's of each radionuclide. The radiation doses from external exposure to contaminated water and soil are calculated using the basic assumption that the contaminated medium is large enough to be considered an infinite volume or plane relative to the range of the emitted radiations. The equations for calculations of the radiation dose from external exposure to shoreline sediments include a correction for the finite width of the contaminated beach

  18. SimITK: rapid ITK prototyping using the Simulink visual programming environment

    Science.gov (United States)

    Dickinson, A. W. L.; Mousavi, P.; Gobbi, D. G.; Abolmaesumi, P.

    2011-03-01

    The Insight Segmentation and Registration Toolkit (ITK) is a long-established, software package used for image analysis, visualization, and image-guided surgery applications. This package is a collection of C++ libraries, that can pose usability problems for users without C++ programming experience. To bridge the gap between the programming complexities and the required learning curve of ITK, we present a higher-level visual programming environment that represents ITK methods and classes by wrapping them into "blocks" within MATLAB's visual programming environment, Simulink. These blocks can be connected to form workflows: visual schematics that closely represent the structure of a C++ program. Due to the heavily C++ templated nature of ITK, direct interaction between Simulink and ITK requires an intermediary to convert their respective datatypes and allow intercommunication. We have developed a "Virtual Block" that serves as an intermediate wrapper around the ITK class and is responsible for resolving the templated datatypes used by ITK to native types used by Simulink. Presently, the wrapping procedure for SimITK is semi-automatic in that it requires XML descriptions of the ITK classes as a starting point, as this data is used to create all other necessary integration files. The generation of all source code and object code from the XML is done automatically by a CMake build script that yields Simulink blocks as the final result. An example 3D segmentation workflow using cranial-CT data as well as a 3D MR-to-CT registration workflow are presented as a proof-of-concept.

  19. Augmenting the Energy-Saving Impact of IEEE 802.3az via the Control Plane

    OpenAIRE

    Thaenchaikun , Chakadkit; Jakllari , Gentian; Paillassa , Béatrice

    2015-01-01

    International audience; IEEE 802.3az, the recent standard for Energy Efficient Ethernet, is one of the main contributions of the ICT industry to the global quest for energy efficiency. Energy consumption reduction is accomplished by essentially replacing the continuous IDLE of legacy IEEE 802.3 cards with a Low Power Idle. While this is an important step in the right direction, studies have shown that the energy saving with IEEE 802.3az highly depends on the traffic load and stops for link ut...

  20. Energy Harvesting - Wireless Sensor Networks for Indoors Applications Using IEEE 802.11

    DEFF Research Database (Denmark)

    Fafoutis, Xenofon; Sørensen, Thomas; Madsen, Jan

    2014-01-01

    The paper investigates the feasibility of using IEEE 802.11 in energy harvesting low-power sensing applications. The investigation is based on a prototype carbon dioxide sensor node that is powered by artificial indoors light. The wireless communication module of the sensor node is based on the RTX......4100 module. RTX4100 incorporates a wireless protocol that duty-cycles the radio while being compatible with IEEE 802.11 access points. The presented experiments demonstrate sustainable operation but indicate a trade-off between the benefits of using IEEE 802.11 in energy harvesting applications...

  1. A review of research programs related to the behavior of plutonium in the environment

    International Nuclear Information System (INIS)

    Bartram, Bart W.; Wilkinson, Martha J.

    1983-01-01

    Plutonium-fueled radioisotopic heat sources find application in a spectrum of space, terrestrial, and underseas applications to generate electrical power by thermoelectric or dynamic-cycle conversion. Such systems under postulated accident conditions could release radioactivity into the environment resulting in risks to the general population. The released radioactivity could be dispersed into various environmental media, such as air, soil, and water and interact with people through various exposure pathways leading to inhalation, ingestion, and external radiological doses and associated health effects. The authors developed short-term exposure (RISK II) and long-term exposure (RISK III) models for use in safety risk assessments of space missions utilizing plutonium-fueled electric power systems. To effectively use these models in risk assessments, representative input values must be selected for a spectrum of environmental transfer parameters that characterize the behavior of plutonium in the environment. The selection of appropriate transfer parameters to be used in a given analysis will depend on the accident scenarios to be modeled and the terrestrial and aquatic environments to be encountered. The authors reviewed the availability of plutonium in the environment. This report summarizes the research programs presently being conducted at six Department of Energy Laboratories and makes recommendations on areas where further research is needed to fill gaps in the data necessary for risk assessments

  2. Performance Analysis of IEEE 802.11e (EDCF) and IEEE 802.11(DCF) WLAN Incorporating Different Physical Layer Standards

    Science.gov (United States)

    Sharma, V.; Singh, H.; Malhotra, J.

    2012-12-01

    Medium access coordination function basically implements the distributed coordination function (DCF) which provides support to best effort services but limited to QoS services. Subsequently, a new standard, namely enhanced distributed channel access (EDCA) is reported. The IEEE 802.11e (EDCA) defines MAC procedures to support QoS requirements which specifies distributed contention based access scheme to access the shared wireless media. This paper evaluates the performance of EDCA based IEEE 802.11 WLAN for various access categories (ACs) using OPNET™ Modeller 14.5. Further, the computed results are compared with DCF protocols in terms of QoS parameters. Furthermore, the simulative observation is reported at data rate of 54 Mbps using different physical layer protocols such as IEEE 802.11a/b/g to stumble on the best one to be implemented with EDCF to achieve improved QoS.

  3. Analysis of Adaptive Control Scheme in IEEE 802.11 and IEEE 802.11e Wireless LANs

    Science.gov (United States)

    Lee, Bih-Hwang; Lai, Hui-Cheng

    In order to achieve the prioritized quality of service (QoS) guarantee, the IEEE 802.11e EDCAF (the enhanced distributed channel access function) provides the distinguished services by configuring the different QoS parameters to different access categories (ACs). An admission control scheme is needed to maximize the utilization of wireless channel. Most of papers study throughput improvement by solving the complicated multidimensional Markov-chain model. In this paper, we introduce a back-off model to study the transmission probability of the different arbitration interframe space number (AIFSN) and the minimum contention window size (CWmin). We propose an adaptive control scheme (ACS) to dynamically update AIFSN and CWmin based on the periodical monitoring of current channel status and QoS requirements to achieve the specific service differentiation at access points (AP). This paper provides an effective tuning mechanism for improving QoS in WLAN. Analytical and simulation results show that the proposed scheme outperforms the basic EDCAF in terms of throughput and service differentiation especially at high collision rate.

  4. Fetal programming of blood pressure in a transgenic mouse model of altered intrauterine environment.

    Science.gov (United States)

    Chiossi, Giuseppe; Costantine, Maged M; Tamayo, Esther; Hankins, Gary D V; Saade, George R; Longo, Monica

    2016-12-01

    Nitric oxide is essential in the vascular adaptation to pregnancy, as knockout mice lacking nitric oxide synthase (NOS3) have abnormal utero-placental perfusion, hypertension and growth restriction. We previously showed with ex vivo studies on transgenic animals lacking NOS3 that adverse intrauterine environment alters fetal programming of vascular reactivity in adult offspring. The current research shows that altered vascular reactivity correlates with higher blood pressure in vivo. Our data suggest that higher blood pressure depends on both genetic background (NOS3 deficiency) and uterine environment, becomes more evident with age (> 7 postnatal weeks), activity and stress, is gender specific (preponderant among males), and can be affected by the sleep-awake cycle. In utero or early postnatal life (programming is associated with abnormal blood pressure (BP) profiles in vivo. Mice lacking a functional endothelial nitric oxide synthase (KO, NOS3 -/- ) and wild-type mice (WT, NOS3 +/+ ) were crossbred to generate homozygous NOS3 -/- (KO), maternally derived heterozygous NOS3 +/- (KOM: mother with adverse intrauterine environment from NOS3 deficiency), paternally derived heterozygous NOS3 +/- (KOP: mother with normal in utero milieu) and NOS3 +/+ (WT) litters. BP was measured in vivo at 7, 14 and 21 weeks of age. After univariate analysis, multivariate population-averaged linear regression models were used to identify factors affecting BP. When compared to WT offspring, systolic (SBP), diastolic (DBP) and mean (MAP) BP progressively increased from KOP, to KOM, and peaked among KO (P 7 postnatal weeks), higher locomotor activity, daytime recordings, and recent blood pressure transducer insertion (P < 0.001). Post hoc analysis showed that KOM had higher SBP than KOP (P < 0.05). Our study indicates that adverse intrauterine environment contributes, along with multiple other factors, to account for hypertension; moreover, in utero or early postnatal life may represent

  5. After the Conference of United Nations Conference on Environment and Development. The national environmental action program

    International Nuclear Information System (INIS)

    1996-01-01

    Following to the Strategy, priorities and principles of the state environmental policy the government of the Slovak republic has accepted by resolution No 350/1996 the first National environmental action program (NEAP), This NEAP contains the measures for attaining of aims of the Strategy in all nine sectors of protection and creation of the environment. The NEAP contains 1356 measures with conceptual, legislative, economic, educational-educational, scientific-research (including monitoring) and organizational character. The measures of the NEAP in detail are discussed

  6. Genetic programming for evolving due-date assignment models in job shop environments.

    Science.gov (United States)

    Nguyen, Su; Zhang, Mengjie; Johnston, Mark; Tan, Kay Chen

    2014-01-01

    Due-date assignment plays an important role in scheduling systems and strongly influences the delivery performance of job shops. Because of the stochastic and dynamic nature of job shops, the development of general due-date assignment models (DDAMs) is complicated. In this study, two genetic programming (GP) methods are proposed to evolve DDAMs for job shop environments. The experimental results show that the evolved DDAMs can make more accurate estimates than other existing dynamic DDAMs with promising reusability. In addition, the evolved operation-based DDAMs show better performance than the evolved DDAMs employing aggregate information of jobs and machines.

  7. Understanding valve program complexity in a refurbishment environment - learning from the past

    International Nuclear Information System (INIS)

    Roth, H.E.

    2012-01-01

    The complexity of Valve Program development, planning, execution and management in a refurbishment environment is an enormous undertaking requiring the proper coordination and integration of many moving parts. As such, lack of attention and understanding of this complexity has led to significant cost and schedule overruns in past refurbishment projects in the province. OPEX indicates the challenges in completing valve scope during refurbishments are related but not limited to; lack of detailed condition assessments, improper scope development, insignificant strategic approach to work task planning, scheduling and procurement, absence of contingency planning for common ‘as found’ conditions during execution, lack of proper training requirements, etc. In addition, past contracting strategies to employ numerous companies in collaboration to complete such a complex and specialized program, has resulted in further complications surrounding the management and integration of multiple quality programs and internal company processes. Finally, the aftermath of such fragmented projects results in an absolute closeout nightmare, often times taking years to locate, sift through and re-integrate pertinent information back into customer systems. Valve Program complexity cannot be understood by just anyone, only those that have lived through a refurbishment project and experienced the challenges mentioned above have the knowledge, skill, and ability to appreciate how to tactically apply past learning to realize future improvements. Furthermore, effective contractor-customer collaboration is crucial; true and in-depth knowledge and understanding of the customer quality programs, engineering and work management processes, configuration management requirements, and most importantly the imperative significance of nuclear safety, are all essential components to ensure overall alignment and program success. (author)

  8. Understanding valve program complexity in a refurbishment environment - learning from the past

    Energy Technology Data Exchange (ETDEWEB)

    Roth, H.E. [Babcock & Wilcox Canada Ltd., Cambridge, Ontario (Canada)

    2012-07-01

    The complexity of Valve Program development, planning, execution and management in a refurbishment environment is an enormous undertaking requiring the proper coordination and integration of many moving parts. As such, lack of attention and understanding of this complexity has led to significant cost and schedule overruns in past refurbishment projects in the province. OPEX indicates the challenges in completing valve scope during refurbishments are related but not limited to; lack of detailed condition assessments, improper scope development, insignificant strategic approach to work task planning, scheduling and procurement, absence of contingency planning for common ‘as found’ conditions during execution, lack of proper training requirements, etc. In addition, past contracting strategies to employ numerous companies in collaboration to complete such a complex and specialized program, has resulted in further complications surrounding the management and integration of multiple quality programs and internal company processes. Finally, the aftermath of such fragmented projects results in an absolute closeout nightmare, often times taking years to locate, sift through and re-integrate pertinent information back into customer systems. Valve Program complexity cannot be understood by just anyone, only those that have lived through a refurbishment project and experienced the challenges mentioned above have the knowledge, skill, and ability to appreciate how to tactically apply past learning to realize future improvements. Furthermore, effective contractor-customer collaboration is crucial; true and in-depth knowledge and understanding of the customer quality programs, engineering and work management processes, configuration management requirements, and most importantly the imperative significance of nuclear safety, are all essential components to ensure overall alignment and program success. (author)

  9. An Interactive Learning Environment for Teaching the Imperative and Object-Oriented Programming Techniques in Various Learning Contexts

    Science.gov (United States)

    Xinogalos, Stelios

    The acquisition of problem-solving and programming skills in the era of knowledge society seems to be particularly important. Due to the intrinsic difficulty of acquiring such skills various educational tools have been developed. Unfortunately, most of these tools are not utilized. In this paper we present the programming microworlds Karel and objectKarel that support the procedural-imperative and Object-Oriented Programming (OOP) techniques and can be used for supporting the teaching and learning of programming in various learning contexts and audiences. The paper focuses on presenting the pedagogical features that are common to both environments and mainly on presenting the potential uses of these environments.

  10. Adaptive threshold control for auto-rate fallback algorithm in IEEE 802.11 multi-rate WLANs

    Science.gov (United States)

    Wu, Qilin; Lu, Yang; Zhu, Xiaolin; Ge, Fangzhen

    2012-03-01

    The IEEE 802.11 standard supports multiple rates for data transmission in the physical layer. Nowadays, to improve network performance, a rate adaptation scheme called auto-rate fallback (ARF) is widely adopted in practice. However, ARF scheme suffers performance degradation in multiple contending nodes environments. In this article, we propose a novel rate adaptation scheme called ARF with adaptive threshold control. In multiple contending nodes environment, the proposed scheme can effectively mitigate the frame collision effect on rate adaptation decision by adaptively adjusting rate-up and rate-down threshold according to the current collision level. Simulation results show that the proposed scheme can achieve significantly higher throughput than the other existing rate adaptation schemes. Furthermore, the simulation results also demonstrate that the proposed scheme can effectively respond to the varying channel condition.

  11. IEEE 1588 Time Synchronization Board in MTCA.4 Form Factor

    Science.gov (United States)

    Jabłoński, G.; Makowski, D.; Mielczarek, A.; Orlikowski, M.; Perek, P.; Napieralski, A.; Makijarvi, P.; Simrock, S.

    2015-06-01

    Distributed data acquisition and control systems in large-scale scientific experiments, like e.g. ITER, require time synchronization with nanosecond precision. A protocol commonly used for that purpose is the Precise Timing Protocol (PTP), also known as IEEE 1588 standard. It uses the standard Ethernet signalling and protocols and allows obtaining timing accuracy of the order of tens of nanoseconds. The MTCA.4 is gradually becoming the platform of choice for building such systems. Currently there is no commercially available implementation of the PTP receiver on that platform. In this paper, we present a module in the MTCA.4 form factor supporting this standard. The module may be used as a timing receiver providing reference clocks in an MTCA.4 chassis, generating a Pulse Per Second (PPS) signal and allowing generation of triggers and timestamping of events on 8 configurable backplane lines and two front panel connectors. The module is based on the Xilinx Spartan 6 FPGA and thermally stabilized Voltage Controlled Oscillator controlled by the digital-to-analog converter. The board supports standalone operation, without the support from the host operating system, as the entire control algorithm is run on a Microblaze CPU implemented in the FPGA. The software support for the card includes the low-level API in the form of Linux driver, user-mode library, high-level API: ITER Nominal Device Support and EPICS IOC. The device has been tested in the ITER timing distribution network (TCN) with three cascaded PTP-enabled Hirschmann switches and a GPS reference clock source. An RMS synchronization accuracy, measured by direct comparison of the PPS signals, better than 20 ns has been obtained.

  12. 2011 IEEE Visualization Contest Winner: Visualizing Unsteady Vortical Behavior of a Centrifugal Pump

    KAUST Repository

    Otto, Mathias; Kuhn, Alexander; Engelke, Wito; Theisel, Holger

    2012-01-01

    In the 2011 IEEE Visualization Contest, the dataset represented a high-resolution simulation of a centrifugal pump operating below optimal speed. The goal was to find suitable visualization techniques to identify regions of rotating stall

  13. Harmonization of IEEE323 and IEC60780 standards For Environmental Qualificaiton of Electric Equipment

    International Nuclear Information System (INIS)

    Kim, Jong Seog

    2009-01-01

    IEEE323 standard has been widely used for the qualification of electric equipment in Asian pacific area while IEC6070 has been mostly used in European area. Since each plant use different standard for environmental qualification, manufacturer has to perform the qualification test twice in accordance with each standard. Problem also can be happened in the plant site when they are going to purchase equipment qualified by different qualification standard which are not used in his plant. The need of harmonization of each standard has been raised several years and it is known that some studies are in progress by IEEE committee. KEPRI has a plan of comparing EQ relative standards of IEEE, IEC and RCC in 2009. In this paper, brief comparing result between IEEE323 and IEC60780 and the proper harmonization method is introduced

  14. Defending IEEE 802.11-Based Networks Against Denial Of Service Attacks

    National Research Council Canada - National Science Library

    Tan, Boon

    2003-01-01

    The convenience of IEEE 8O2.11-based wireless access networks has led to widespread deployment in the consumer, industrial and military sectors However, this use is predicated on an implicit assumption of confidentiality...

  15. Corrections to "Connectivity-Based Reliable Multicast MAC Protocol for IEEE 802.11 Wireless LANs"

    Directory of Open Access Journals (Sweden)

    Choi Woo-Yong

    2010-01-01

    Full Text Available We have found the errors in the throughput formulae presented in our paper "Connectivity-based reliable multicast MAC protocol for IEEE 802.11 wireless LANs". We provide the corrected formulae and numerical results.

  16. Accurate Energy Consumption Modeling of IEEE 802.15.4e TSCH Using Dual-BandOpenMote Hardware.

    Science.gov (United States)

    Daneels, Glenn; Municio, Esteban; Van de Velde, Bruno; Ergeerts, Glenn; Weyn, Maarten; Latré, Steven; Famaey, Jeroen

    2018-02-02

    The Time-Slotted Channel Hopping (TSCH) mode of the IEEE 802.15.4e amendment aims to improve reliability and energy efficiency in industrial and other challenging Internet-of-Things (IoT) environments. This paper presents an accurate and up-to-date energy consumption model for devices using this IEEE 802.15.4e TSCH mode. The model identifies all network-related CPU and radio state changes, thus providing a precise representation of the device behavior and an accurate prediction of its energy consumption. Moreover, energy measurements were performed with a dual-band OpenMote device, running the OpenWSN firmware. This allows the model to be used for devices using 2.4 GHz, as well as 868 MHz. Using these measurements, several network simulations were conducted to observe the TSCH energy consumption effects in end-to-end communication for both frequency bands. Experimental verification of the model shows that it accurately models the consumption for all possible packet sizes and that the calculated consumption on average differs less than 3% from the measured consumption. This deviation includes measurement inaccuracies and the variations of the guard time. As such, the proposed model is very suitable for accurate energy consumption modeling of TSCH networks.

  17. Compliance and Functional Testing of IEEE 1451.1 for NCAP-to-NCAP Communications in a Sensor Network

    Science.gov (United States)

    Figueroa, Jorge; Gurkan, Deniz; Yuan, X.; Benhaddou, D.; Liu, H.; Singla, A.; Franzl, R.; Ma, H.; Bhatt, S.; Morris, J.; hide

    2008-01-01

    Distributed control in a networked environment is an irreplaceable feature in systems with remote sensors and actuators. Although distributed control was not originally designed to be networked, usage of off-the-shelf networking technologies has become so prevalent that control systems are desired to have access mechanisms similar to computer networks. However, proprietary transducer interfaces for network communications and distributed control overwhelmingly dominate this industry. Unless the lack of compatibility and interoperability among transducers is resolved, the mature level of access (that computer networking can deliver) will not be achieved in such networked distributed control systems. Standardization of networked transducer interfaces will enable devices from different manufacturers to talk to each other and ensure their plug-and-play capability. One such standard is the suite of IEEE 1451 for sensor network communication and transducer interfaces. The suite not only provides a standard interface for smart transducers, but also outlines the connection of an NCAP (network capable application processor) and transducers (through a transducer interface module TIM). This paper presents the design of the compliance testing of IEEE 1451.1 (referred to as Dot1) compatible NCAP-to-NCAP communications on a link-layer independent medium. The paper also represents the first demonstration of NCAP-to-NCAP communications with Dot1 compatibility: a tester NCAP and an NCAP under test (NUT).

  18. Performance modeling of a two-tier primary-secondary network with IEEE 802.11 broadcast scheme

    KAUST Repository

    Khabazian, Mehdi

    2011-03-01

    In this paper, we study the performance of a two-tier primary-secondary network based on IEEE 802.11 broadcast scheme. We assume that a number of primary and secondary users coexist in the radio environment and share a single band. To protect the primary users\\' priority, the secondary users are allowed to contend for the channel only if they sense it idle for a certain sensing time. Considering an exponential packet inter-arrival time for the primary network, we model each primary user as an independent M/G/1 queue. Subsequently, we determine the primary users\\' average medium access delay in the presence of secondary users as well as the hybrid network\\'s throughput. Numerical results and discussions show the effects of parameters pertaining to the secondary users, such as as sensing time, packet payload size and population size, on the performance of the primary network. Furthermore, we provide simulation results which confirm the accuracy of the proposed analysis. © 2011 IEEE.

  19. Performance modeling of a two-tier primary-secondary network with IEEE 802.11 broadcast scheme

    KAUST Repository

    Khabazian, Mehdi; Aissa, Sonia; El Kefi, Rania

    2011-01-01

    In this paper, we study the performance of a two-tier primary-secondary network based on IEEE 802.11 broadcast scheme. We assume that a number of primary and secondary users coexist in the radio environment and share a single band. To protect the primary users' priority, the secondary users are allowed to contend for the channel only if they sense it idle for a certain sensing time. Considering an exponential packet inter-arrival time for the primary network, we model each primary user as an independent M/G/1 queue. Subsequently, we determine the primary users' average medium access delay in the presence of secondary users as well as the hybrid network's throughput. Numerical results and discussions show the effects of parameters pertaining to the secondary users, such as as sensing time, packet payload size and population size, on the performance of the primary network. Furthermore, we provide simulation results which confirm the accuracy of the proposed analysis. © 2011 IEEE.

  20. Assessment of Changes in School Nutrition Programs and the School Environment as a Result of Following the HealthierUS School Challenge Program

    Science.gov (United States)

    Brown, Jennifer S.; Bednar, Carolyn; DiMarco, Nancy M.; Connors, Priscilla L.

    2012-01-01

    Purpose/Objectives: The purpose of this study was to determine changes in school nutrition programs and the school environment as reported by school nutrition directors who are following the U.S. Department of Agriculture's HealthierUS School Challenge (HUSSC) program. The objective was to determine before and after changes in the average lunch…

  1. Defending IEEE 802.11-Based Networks Against Denial Of Service Attacks

    National Research Council Canada - National Science Library

    Tan, Boon

    2003-01-01

    ...) attacks targeting its management and media access protocols Computer simulation models have proven to be effective tools in the study of cause and effect in numerous fields This thesis involved the design and implementation of a IEEE 8O2.11-based simulation model using OMNeT++, to investigate the effects of different types of DoS attacks on a IEEE 8O2.11 network, and the effectiveness of corresponding countermeasures.

  2. Homeland Security Affairs Journal, Supplement - 2012: IEEE 2011 Conference on Technology for Homeland Security: Best Papers

    OpenAIRE

    2012-01-01

    Homeland Security Affairs is the peer-reviewed online journal of the Naval Postgraduate School Center for Homeland Defense and Security (CHDS), providing a forum to propose and debate strategies, policies, and organizational arrangements to strengthen U.S. homeland security. The instructors, participants, alumni, and partners of CHDS represent the leading subject matter experts and practitioners in the field of homeland security. IEEE Supplement 2012. Supplement: IEEE 2011 Conference on Te...

  3. Performance of the IEEE 802.3 EPON registration scheme under high load

    Science.gov (United States)

    Bhatia, Swapnil P.; Bartos, Radim

    2004-09-01

    The proposed standard for the IEEE 802.3 Ethernet Passive Optical Network includes a random delayed transmission scheme for registration of new nodes. Although the scheme performs well on low loads, our simulation demonstrates the degraded and undesirable performance of the scheme at higher loads. We propose a simple modification to the current scheme that increases its range of operation and is compatible with the IEEE draft standard. We demonstrate the improvement in performance gained without any significant increase in registration delay.

  4. Isolan - A Fibre Optic Network Conforming To IEEE 802.3 Standards

    Science.gov (United States)

    Roworth, D. A. A.; Howe, N.

    1986-10-01

    The progress of the IEEE 802.3 standard for fibre optic LANs is indicated with reference to both mixed media networks and full fibre networks. For a fibre optic network the most suitable layout is a "snowflake" topology composed of multiport repeaters and active fibre hubs. A range of components is described which enables the realisation of such a topology in conformance with the IEEE 802.3 standard.

  5. Validation of IEEE P1547.1 Interconnection Test Procedures: ASCO 7000 Soft Load Transfer System

    Energy Technology Data Exchange (ETDEWEB)

    Kroposki, B.; Englebretson, S.; Pink, C.; Daley, J.; Siciliano, R.; Hinton, D.

    2003-09-01

    This report presents the preliminary results of testing the ASCO 7000 Soft Load Transfer System according to IEEE P1547.1 procedures. The ASCO system interconnects synchronous generators with the electric power system and provides monitoring and control for the generator and grid connection through extensive protective functions. The purpose of this testing is to evaluate and give feedback on the contents of IEEE Draft Standard P1547.1 Conformance Tests Procedures for Equipment Interconnecting Distributed Resources With Electric Power Systems.

  6. Real-time-service-based Distributed Scheduling Scheme for IEEE 802.16j Networks

    OpenAIRE

    Kuo-Feng Huang; Shih-Jung Wu

    2013-01-01

    Supporting Quality of Service (QoS) guarantees for diverse multimedia services is the primary concern for IEEE802.16j networks. A scheduling scheme that satisfies the QoS requirements has become more important for wireless communications. We proposed an adaptive nontransparent-based distributed scheduling scheme (ANDS) for IEEE 802.16j networks. ANDS comprises three major components: Priority Assignment, Resource Allocation, Preserved Bandwidth Adjustment. Different service-type connections p...

  7. Enhancing MAC performance of DCF protocol for IEEE 802.11 wireless LANs

    Science.gov (United States)

    Choi, Woo-Yong

    2017-01-01

    The DCF (Distributed Coordination Function) is the basic MAC (Medium Access Control) protocol of IEEE 802.11 wireless LANs and compatible with various IEEE 802.11 PHY extensions. The performance of the DCF degrades exponentially as the number of nodes participating in the DCF transmission procedure increases. To deal with this problem, we propose a simple, however efficient modification of the DCF by which the performance of the DCF is greatly enhanced.

  8. Radio Frequency Fingerprinting Techniques Through Preamble Modification in IEEE 802.11B

    Science.gov (United States)

    2014-06-30

    4.2.1 Wald–Wolfowitz Runs Test . . . . . . . . . . . . . . . . . . . . . . 41 4.2.2 Wald–Wolfowitz Application to SXS System . . . . . . . . . . . . 42...Station SXS Signals eXploitation System USB Universal Serial Bus xiv Acronym Definition USRP Universal Software Radio Peripheral WLAN Wireless Local...Electronics Engineers (IEEE) defines standards applicable to the IEEE 802.11 protocol, however the standard does not reach the level of specificity to dictate

  9. Green Frame Aggregation Scheme for IEEE 802.11n Networks

    KAUST Repository

    Alaslani, Maha S.

    2015-04-01

    Frame aggregation is one of the major MAC layer enhancements in the IEEE 802.11 family that boosts the network throughput performance. It aims to achieve higher throughput by transmitting huge amount of data in a single transmit oppor- tunity. With the increasing awareness of energy e ciency, it has become vital to rethink about the design of such frame aggregation protocol. Aggregation techniques help to reduce energy consumption over ideal channel conditions. However, in a noisy channel environment, a new energy-aware frame aggregation scheme is required. In this thesis, a novel Green Frame Aggregation (GFA) scheduling scheme has been proposed and evaluated. GFA optimizes the aggregate size based on channel quality in order to minimize the consumed energy. GFA selects the optimal sub-frame size that satisfies the loss constraint for real-time applications as well as the energy budget of the ideal channel situations. The design, the implementation, and evaluation of GFA using testbed deployment is done. The experimental analysis shows that GFA outperforms the conventional frame aggregation methodology in terms of energy e ciency by about 6⇥ in the presence of severe interference conditions. Moreover, GFA also outperforms the static frame sizing method in terms of network goodput and maintains almost the same end- to-end latency.

  10. IEEE-802.15.4-based low-power body sensor node with RF energy harvester.

    Science.gov (United States)

    Tran, Thang Viet; Chung, Wan-Young

    2014-01-01

    This paper proposes the design and implementation of a low-voltage and low-power body sensor node based on the IEEE 802.15.4 standard to collect electrocardiography (ECG) and photoplethysmography (PPG) signals. To achieve compact size, low supply voltage, and low power consumption, the proposed platform is integrated into a ZigBee mote, which contains a DC-DC booster, a PPG sensor interface module, and an ECG front-end circuit that has ultra-low current consumption. The input voltage of the proposed node is very low and has a wide range, from 0.65 V to 3.3 V. An RF energy harvester is also designed to charge the battery during the working mode or standby mode of the node. The power consumption of the proposed node reaches 14 mW in working mode to prolong the battery lifetime. The software is supported by the nesC language under the TinyOS environment, which enables the proposed node to be easily configured to function as an individual health monitoring node or a node in a wireless body sensor network (BSN). The proposed node is used to set up a wireless BSN that can simultaneously collect ECG and PPG signals and monitor the results on the personal computer.

  11. PABLM: a computer program to calculate accumulated radiation doses from radionuclides in the environment

    Energy Technology Data Exchange (ETDEWEB)

    Napier, B.A.; Kennedy, W.E. Jr.; Soldat, J.K.

    1980-03-01

    A computer program, PABLM, was written to facilitate the calculation of internal radiation doses to man from radionuclides in food products and external radiation doses from radionuclides in the environment. This report contains details of mathematical models used and calculational procedures required to run the computer program. Radiation doses from radionuclides in the environment may be calculated from deposition on the soil or plants during an atmospheric or liquid release, or from exposure to residual radionuclides in the environment after the releases have ended. Radioactive decay is considered during the release of radionuclides, after they are deposited on the plants or ground, and during holdup of food after harvest. The radiation dose models consider several exposure pathways. Doses may be calculated for either a maximum-exposed individual or for a population group. The doses calculated are accumulated doses from continuous chronic exposure. A first-year committed dose is calculated as well as an integrated dose for a selected number of years. The equations for calculating internal radiation doses are derived from those given by the International Commission on Radiological Protection (ICRP) for body burdens and MPC's of each radionuclide. The radiation doses from external exposure to contaminated water and soil are calculated using the basic assumption that the contaminated medium is large enough to be considered an infinite volume or plane relative to the range of the emitted radiations. The equations for calculations of the radiation dose from external exposure to shoreline sediments include a correction for the finite width of the contaminated beach.

  12. Student perception of the educational environment in regular and bridging nursing programs in Saudi Arabia using the Dundee Ready Educational Environment Measure.

    Science.gov (United States)

    Al Nozha, Omar Mansour; Fadel, Hani T

    2017-01-01

    Taibah University offers regular nursing (RNP) and nursing bridging (NBP) bachelor programs. We evaluated student perception of the learning environment as one means of quality assurance. To assess nursing student perception of their educational environment, to compare the perceptions of regular and bridging students, and to compare the perceptions of students in the old and new curricula. Cross-sectional survey. College of Nursing at Taibah University, Madinah, Saudi Arabia. The Dundee Ready Educational Environment Measure (DREEM) instrument was distributed to over 714 nursing students to assess perception of the educational environment. Independent samples t test and Pearson's chi square were used to compare the programs and curricula. The DREEM inventory score. Of 714 students, 271 (38%) were RNP students and 443 (62%) were NBP students. The mean (standard deviation) DREEM score was 111 (25). No significant differences were observed between the programs except for the domain "academic self-perceptions" being higher in RNP students (P .05). Nursing students generally perceived their learning environment as more positive than negative. Regular students were more positive than bridging students. Students who experienced the new curriculum were more positive towards learning. The cross-sectional design and unequal gender and study level distributions may limit generalizability of the results. Longitudinal, large-scale studies with more even distributions of participant characteristics are needed.

  13. Environment

    International Nuclear Information System (INIS)

    McIntyre, A.D.; Turnbull, R.G.H.

    1992-01-01

    The development of the hydrocarbon resources of the North Sea has resulted in both offshore and onshore environmental repercussions, involving the existing physical attributes of the sea and seabed, the coastline and adjoining land. The social and economic repercussions of the industry were equally widespread. The dramatic and speedy impact of the exploration and exploitation of the northern North Sea resources in the early 1970s, on the physical resources of Scotland was quickly realised together with the concern that any environmental and social damage to the physical and social fabric should be kept to a minimum. To this end, a wide range of research and other activities by central and local government, and other interested agencies was undertaken to extend existing knowledge on the marine and terrestrial environments that might be affected by the oil and gas industry. The outcome of these activities is summarized in this paper. The topics covered include a survey of the marine ecosystems of the North Sea, the fishing industry, the impact of oil pollution on seabirds and fish stocks, the ecology of the Scottish coastline and the impact of the petroleum industry on a selection of particular sites. (author)

  14. Nursing students' perceptions of their educational environment in the bachelor's programs of the Shifa College of Nursing, Pakistan.

    Science.gov (United States)

    Victor, Gideon; Ishtiaq, Muhammad; Parveen, Subia

    2017-01-01

    The objective of this study was to evaluate nursing students' perceptions of their educational environment in a private college. Perceptions were compared between genders and 2 bachelor's programs. A total of 219 students participated in this study, drawn from the Generic Bachelor of Science in Nursing (GBSN) and the Post-Registered Nurse Bachelor of Science in Nursing (PRBSN) programs of the Shifa College of Nursing, Islamabad, Pakistan. The Dundee Ready Education Environment Measure was utilized for data collection. Descriptive statistics were used to calculate total scores, as well as means and standard deviations, and the t-test was applied for comparisons according to program and gender. The overall total mean score (119 of 200) is suggestive of more positive than negative perceptions of the educational environment. The mean score of 13 of 28 on the social self-perception subscale suggests that the social environment was felt to be 'not a nice place.' The t-test revealed more positive perceptions among students enrolled in the PRBSN program (Pnursing students. Both positive and negative perceptions were reported; the overall sense of a positive environment was present, but the social component requires immediate attention, along with other unsatisfactory components. Establishing a supportive environment conducive to competence-based learning would play an important role in bringing desirable changes to the educational environment.

  15. THE PROPOSED MODEL OF COLLABORATIVE VIRTUAL LEARNING ENVIRONMENT FOR INTRODUCTORY PROGRAMMING COURSE

    Directory of Open Access Journals (Sweden)

    Mahfudzah OTHMAN

    2012-01-01

    Full Text Available This paper discusses the proposed model of the collaborative virtual learning system for the introductory computer programming course which uses one of the collaborative learning techniques known as the “Think-Pair-Share”. The main objective of this study is to design a model for an online learning system that facilitates the collaborative learning activities in a virtual environment such as online communications and pair or small group discussions. In order to model the virtual learning environment, the RUP methodology has been used where it involves the data collection phase and the analysis and design phase. Fifty respondents have been randomly selected to participate in the data collection phase to investigate the students’ interest and learning styles as well as their learning preferences. The results have shown the needs for the development of online small group discussions that can be used as an alternative learning style for programming courses. The proposed design of the virtual learning system named as the Online Collaborative Learning System or OCLS is being depicted using the object-oriented models which are the use-case model and class diagram in order to show the concise processes of virtual “Think-Pair-Share” collaborative activities. The “Think-Pair-Share” collaborative learning technique that is being used in this model has been chosen because of its simplicity and relatively low-risk. This paper also presents the proposed model of the system’s architecture that will become the guidelines for the physical development of OCLS using the web-based applications.

  16. POLLING AND DUAL-LEVEL TRAFFIC ANALYSIS FOR IMPROVED DOS DETECTION IN IEEE 802.21 NETWORKS

    Directory of Open Access Journals (Sweden)

    Nygil Alex Vadakkan

    2014-06-01

    Full Text Available The IEEE 802.21 standard was developed for communication of devices in a heterogeneous environment which included greater support for handoffs. This paper focuses on the denial of service (DoS vulnerabilities faced by such Media Independent Handover (MIH networks & various effective countermeasures that can be deployed to prevent their impact on such heterogeneous networks. The use of polling mechanism coupled with real time as well as offline traffic analysis can keep a good number of attacks at bay. The use of offline traffic analysis is to use the model and compare it with a lighter model and see if any of the excluded features in the lighter model have had suspicious variations which could be a varied form of DoS attack or an attack that is completely new. The countermeasures that have been developed also allows for the increase in efficiency of data transfer as well as higher rates of success in handoffs.

  17. Receiving more than data - a signal model, theory and implementation of a cognitive IEEE 802.15.4 receiver

    Directory of Open Access Journals (Sweden)

    Tim Esemann

    2016-09-01

    Full Text Available Standard medium access schemes sense the channel immediately prior transmission, but are blind during the transmission. Therefore, standard transceivers have limited cognitive capabilities which are important for operation in heterogeneous radio environments. Specifically, mobile interferers move gradually into the reception range before actually causing collisions. These gradual interferences cannot yet be detected, and upcoming collisions cannot be predicted. We present a theoretical analysis of the received and demodulated signal. This analysis and the derived signal model verifies that the received signal contains more than transmitted data exclusively. Enhanced signal processing extracts signal components of an interference at the receiver and enables advanced interference detection to provide information about approaching mobile interferers. Our theoretical analysis is evaluated by simulations and experiments with an IEEE 802.15.4 transmitter and an extended cognitive receiver.

  18. IEEE 1547 and 2030 Standards for Distributed Energy Resources Interconnection and Interoperability with the Electricity Grid

    Energy Technology Data Exchange (ETDEWEB)

    Basso, T.

    2014-12-01

    Public-private partnerships have been a mainstay of the U.S. Department of Energy and the National Renewable Energy Laboratory (DOE/NREL) approach to research and development. These partnerships also include technology development that enables grid modernization and distributed energy resources (DER) advancement, especially renewable energy systems integration with the grid. Through DOE/NREL and industry support of Institute of Electrical and Electronics Engineers (IEEE) standards development, the IEEE 1547 series of standards has helped shape the way utilities and other businesses have worked together to realize increasing amounts of DER interconnected with the distribution grid. And more recently, the IEEE 2030 series of standards is helping to further realize greater implementation of communications and information technologies that provide interoperability solutions for enhanced integration of DER and loads with the grid. For these standards development partnerships, for approximately $1 of federal funding, industry partnering has contributed $5. In this report, the status update is presented for the American National Standards IEEE 1547 and IEEE 2030 series of standards. A short synopsis of the history of the 1547 standards is first presented, then the current status and future direction of the ongoing standards development activities are discussed.

  19. Automatically visualise and analyse data on pathways using PathVisioRPC from any programming environment.

    Science.gov (United States)

    Bohler, Anwesha; Eijssen, Lars M T; van Iersel, Martijn P; Leemans, Christ; Willighagen, Egon L; Kutmon, Martina; Jaillard, Magali; Evelo, Chris T

    2015-08-23

    Biological pathways are descriptive diagrams of biological processes widely used for functional analysis of differentially expressed genes or proteins. Primary data analysis, such as quality control, normalisation, and statistical analysis, is often performed in scripting languages like R, Perl, and Python. Subsequent pathway analysis is usually performed using dedicated external applications. Workflows involving manual use of multiple environments are time consuming and error prone. Therefore, tools are needed that enable pathway analysis directly within the same scripting languages used for primary data analyses. Existing tools have limited capability in terms of available pathway content, pathway editing and visualisation options, and export file formats. Consequently, making the full-fledged pathway analysis tool PathVisio available from various scripting languages will benefit researchers. We developed PathVisioRPC, an XMLRPC interface for the pathway analysis software PathVisio. PathVisioRPC enables creating and editing biological pathways, visualising data on pathways, performing pathway statistics, and exporting results in several image formats in multiple programming environments. We demonstrate PathVisioRPC functionalities using examples in Python. Subsequently, we analyse a publicly available NCBI GEO gene expression dataset studying tumour bearing mice treated with cyclophosphamide in R. The R scripts demonstrate how calls to existing R packages for data processing and calls to PathVisioRPC can directly work together. To further support R users, we have created RPathVisio simplifying the use of PathVisioRPC in this environment. We have also created a pathway module for the microarray data analysis portal ArrayAnalysis.org that calls the PathVisioRPC interface to perform pathway analysis. This module allows users to use PathVisio functionality online without having to download and install the software and exemplifies how the PathVisioRPC interface can be

  20. Extermination Of Uranium Isotopes Composition Using A Micro Computer With An IEEE-488 Interface For Mass Spectrometer Analysis

    International Nuclear Information System (INIS)

    Prajitno; Taftazani, Agus; Yusuf

    1996-01-01

    A mass spectrometry method can be used to make qualitative or quantitative analysis. For qualitative analysis, identification of unknown materials by a Mass Spectrometer requires definite assignment of mass number to peak on chart. In quantitative analysis, a mass spectrometer is used to determine isotope composition material in the sample. Analysis system of a Mass Spectrometer possession of PPNY-BATAN based on comparison ion current intensity which enter the collector, and have been used to analyse isotope composition. Calculation of isotope composition have been manually done. To increase the performance and to avoid manual data processing, a micro computer and IEEE-488 interface have been installed, also software packaged has been made. So that the determination of the isotope composition of material in the sample will be faster and more efficient. Tile accuracy of analysis using this program on sample standard U 3 O 8 NBS 010 is between 93,87% - 99,98%

  1. IEEE standard for type test of class 1E electric cables, field splices, and connections for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1974-01-01

    The Institute of Electrical and Electronics Engineers has generated this document to provide guidance for developing a program to type test cables, field splices, and connections and obtain specific type test data. It supplements IEEE Std 323-1974 Standard for Qualifying Class IE Equipment for Nuclear Power Generating Stations, which describes basic requirements for equipment qualification. It is the integrated performance of the structures, fluid systems, the electrical systems, the instrumentation systems of the station, and in particular, the plant protection system, that limits the consequences of accidents. Seismic effects on installed cable systems are not within the scope of this document. Section 2 of this guide is an example of type tests. It is the purpose of this guide to deal with cable and connections; however, at the time of issue, detailed examples of tests for connections were not available

  2. MANAGEMENT basic professional educational program IN THE CONDITIONS OF information and educational environment based on cloud TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    O. F. Bryksina

    2016-01-01

    Full Text Available The article substantiates the advantages of building information-educational environment of the basic professional educational program based on cloud technologies. Universal tool for building information-educational environment is Google Apps for Education services, which allows to organize the effective cooperation of all participants of the educational process, to plan collaborative activities, properly allocate resources and provide the solution of various learning tasks by necessary tools. Examples of using various Google-services in the organization of the collaborative activities of teachers of the department of applied informatics and information technologies in education of the Minin Nizhny Novgorod State Pedagogical University to improve implementation of the basic professional educational program in the direction of preparation "Information systems and technology". The core of the informational and educational environment of the basic professional educational program is Google-site that integrates different Google services and Google Apps applications.

  3. Influence of Library Environments, Instructional Programs, and User-Librarian Collaborations on Library Use by Undergraduate Students in Nigeria

    Directory of Open Access Journals (Sweden)

    Amusa Oyintola Isiaka

    2013-06-01

    Full Text Available This study employed a survey method to investigate the influence of library environments, user education, and user-librarian collaborations on the use of academic libraries by undergraduate students in Nigeria. 2,676 students from six universities in the South-West Nigeria responded to the questionnaire. The findings revealed that the academic libraries are less used because of the availability of alternative information systems (such as the Internet, reading-rooms in residence halls and apartments, poor library environment, inadequate user education programs, and absence of formal user-librarian collaboration programs. It is recommended that the internal and external environment of the libraries be improved, that user education programs be extended to 2 semesters, and that user-librarian collaborations be institutionalised.

  4. IEEE No. 323, IEEE trial-use standard: General guide for qualifying Class I electric equipment for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This document describes the basic requirements for the qualification of Class I electric equipment. This is equipment which is essential to the safe shutdown and isolation of the reactor or whose failure or damage could result in significant release of radioactive material. The purpose of this document is to provide guidance for demonstrating the qualifications of electrical equipment as required in the IEEE Std 279 -- Criteria for Nuclear Power Generating Station Protection Systems, and IEEE Std 308 -- Criteria for Class 1E Electric Systems for Nuclear Power Generating Stations. The qualification methods described may be used in conjunction with the Guides for qualifying specific types of equipment, (see Foreword), for updating qualification following modifications or for qualifying equipment for which no applicable Guide exists

  5. Optimizing the MAC Protocol in Localization Systems Based on IEEE 802.15.4 Networks

    Directory of Open Access Journals (Sweden)

    Juan J. Pérez-Solano

    2017-07-01

    Full Text Available Radio frequency signals are commonly used in the development of indoor localization systems. The infrastructure of these systems includes some beacons placed at known positions that exchange radio packets with users to be located. When the system is implemented using wireless sensor networks, the wireless transceivers integrated in the network motes are usually based on the IEEE 802.15.4 standard. But, the CSMA-CA, which is the basis for the medium access protocols in this category of communication systems, is not suitable when several users want to exchange bursts of radio packets with the same beacon to acquire the radio signal strength indicator (RSSI values needed in the location process. Therefore, new protocols are necessary to avoid the packet collisions that appear when multiple users try to communicate with the same beacons. On the other hand, the RSSI sampling process should be carried out very quickly because some systems cannot tolerate a large delay in the location process. This is even more important when the RSSI sampling process includes measures with different signal power levels or frequency channels. The principal objective of this work is to speed up the RSSI sampling process in indoor localization systems. To achieve this objective, the main contribution is the proposal of a new MAC protocol that eliminates the medium access contention periods and decreases the number of packet collisions to accelerate the RSSI collection process. Moreover, the protocol increases the overall network throughput taking advantage of the frequency channel diversity. The presented results show the suitability of this protocol for reducing the RSSI gathering delay and increasing the network throughput in simulated and real environments.

  6. Optimizing the MAC Protocol in Localization Systems Based on IEEE 802.15.4 Networks.

    Science.gov (United States)

    Pérez-Solano, Juan J; Claver, Jose M; Ezpeleta, Santiago

    2017-07-06

    Radio frequency signals are commonly used in the development of indoor localization systems. The infrastructure of these systems includes some beacons placed at known positions that exchange radio packets with users to be located. When the system is implemented using wireless sensor networks, the wireless transceivers integrated in the network motes are usually based on the IEEE 802.15.4 standard. But, the CSMA-CA, which is the basis for the medium access protocols in this category of communication systems, is not suitable when several users want to exchange bursts of radio packets with the same beacon to acquire the radio signal strength indicator (RSSI) values needed in the location process. Therefore, new protocols are necessary to avoid the packet collisions that appear when multiple users try to communicate with the same beacons. On the other hand, the RSSI sampling process should be carried out very quickly because some systems cannot tolerate a large delay in the location process. This is even more important when the RSSI sampling process includes measures with different signal power levels or frequency channels. The principal objective of this work is to speed up the RSSI sampling process in indoor localization systems. To achieve this objective, the main contribution is the proposal of a new MAC protocol that eliminates the medium access contention periods and decreases the number of packet collisions to accelerate the RSSI collection process. Moreover, the protocol increases the overall network throughput taking advantage of the frequency channel diversity. The presented results show the suitability of this protocol for reducing the RSSI gathering delay and increasing the network throughput in simulated and real environments.

  7. Design of handoff procedures for broadband wireless access IEEE 802.16 based networks

    Directory of Open Access Journals (Sweden)

    V. Rangel–Licea

    2008-01-01

    Full Text Available IEEE 802.16 is a protocol for fixed broad band wire less access that is currently trying to add mobility among mobile users in the standard. However, mobility adds some technical barriers that should be solved first, this is the case of HO "handoff" (change of connection between two base stations "BS" by a mobile user. In this paper, the problem of HO in IEEE 802.16 is approached try ing to maintain the quality of service (QoS of mobile users. A mechanism for changing connection during HO is pre sented. A simulation model based on OPNET MODELER1 was developed to evaluate the performance of the proposed HO mechanism. Finally, this paper demonstrates that it is possible to implement a seam less HO mech a nism over IEEE 802.16 even for users with de manding applications such as voice over IP.

  8. An Extended IEEE 118-Bus Test System With High Renewable Penetration

    Energy Technology Data Exchange (ETDEWEB)

    Pena, Ivonne; Martinez-Anido, Carlo Brancucci; Hodge, Bri-Mathias

    2018-01-01

    This article describes a new publicly available version of the IEEE 118-bus test system, named NREL-118. The database is based on the transmission representation (buses and lines) of the IEEE 118-bus test system, with a reconfigured generation representation using three regions of the US Western Interconnection from the latest Western Electricity Coordination Council (WECC) 2024 Common Case [1]. Time-synchronous hourly load, wind, and solar time series are provided for over one year (8784 hours). The public database presented and described in this manuscript will allow researchers to model a test power system using detailed transmission, generation, load, wind, and solar data. This database includes key additional features that add to the current IEEE 118-bus test model, such as: the inclusion of 10 generation technologies with different heat rate functions, minimum stable levels and ramping rates, GHG emissions rates, regulation and contingency reserves, and hourly time series data for one full year for load, wind and solar generation.

  9. PERFORMANCE STUDY OF DISTRIBUTED COORDINATION FUNCTION OVER IEEE 802.11A PHYSICAL LAYER

    Directory of Open Access Journals (Sweden)

    S. SELVAKENEDDY

    2006-06-01

    Full Text Available IEEE 802.11a is one of the latest standards to be released by the IEEE Project 802 for wireless LANs. It has specified an additional physical layer (PHY to support higher data rates, and is termed as the orthogonal frequency division multiplexing (OFDM. In order to exploit its benefits, one of the medium access control (MAC protocols specified in the IEEE 802.11 specification is called distributed coordination function (DCF. DCF is a carrier sense multiple access with collision avoidance (CSMA/CA scheme with slotted binary exponential backoff. The frames can be transmitted using the basic access scheme or the RTS/CTS scheme in DCF. It was demonstrated previously that the RTS/CTS mechanism works well in most scenarios for the previously specified PHYs. In this work, a simple simulator is developed to verify the scalability of the RTS/CTS mechanism over OFDM PHY, which supports much higher data rates.

  10. The scalable coherent interface, IEEE P1596, status and possible applications to data acquisition and physics

    International Nuclear Information System (INIS)

    Gustavson, D.B.

    1990-01-01

    IEEE P1596, the Scalable Coherent Interface (formerly known as SuperBus) is based on experience gained while developing Fastbus (ANSI/IEEE 960-1986, IEC 935), Futurebus (IEEE P896.x) and other modern 32-bit buses. SCI goals include a minimum bandwidth of 1 GByte/sec per processor in multiprocessor systems with thousands of processors; efficient support of a coherent distributed-cache image of distributed shared memory; support for repeaters which interface to existing or future buses; and support for inexpensive small rings as well as for general switched interconnections like Banyan, Omega, or crossbar networks. This paper presents a summary of current directions, reports the status of the work in progress, and suggests some applications in data acquisition and physics. 7 refs

  11. Application of IEEE 1588 to the real-time control system of accelerator

    International Nuclear Information System (INIS)

    Ma Mingchao; Chen Jianfeng; Shen Liren; Jiang Geyang

    2014-01-01

    Background: Time synchronization is one of the core technology of realizing the real-time control of accelerator under the distributed control system architecture. The ordinary crystal frequency deviation of IEEE 1588 causes low synchronous accuracy, which doesn't meet the needs of high precision synchronization. Purpose: This paper proposes an algorithm to improve the synchronization precision caused by the crystal frequency deviation. Methods: According to the basic principle of IEEE 1588 time synchronization, a dynamic frequency compensation (DFC) algorithm module was designed and a test platform was built to verify the feasibility and practicability of the algorithm. The influence of the synchronous cycle and delay jitter of the switch on the synchronization accuracy were analyzed. Results: Experimental results showed the great precision improvement of synchronization after using DFC algorithm. Conclusion: Low synchronous accuracy caused by the crystal frequency deviation can be improved by using DFC algorithm implemented for precision time protocol (PTP) of IEEE 1588. (authors)

  12. An analytical model for the performance analysis of concurrent transmission in IEEE 802.15.4.

    Science.gov (United States)

    Gezer, Cengiz; Zanella, Alberto; Verdone, Roberto

    2014-03-20

    Interference is a serious cause of performance degradation for IEEE802.15.4 devices. The effect of concurrent transmissions in IEEE 802.15.4 has been generally investigated by means of simulation or experimental activities. In this paper, a mathematical framework for the derivation of chip, symbol and packet error probability of a typical IEEE 802.15.4 receiver in the presence of interference is proposed. Both non-coherent and coherent demodulation schemes are considered by our model under the assumption of the absence of thermal noise. Simulation results are also added to assess the validity of the mathematical framework when the effect of thermal noise cannot be neglected. Numerical results show that the proposed analysis is in agreement with the measurement results on the literature under realistic working conditions.

  13. Throughput and delay analysis of IEEE 802.15.6-based CSMA/CA protocol.

    Science.gov (United States)

    Ullah, Sana; Chen, Min; Kwak, Kyung Sup

    2012-12-01

    The IEEE 802.15.6 is a new communication standard on Wireless Body Area Network (WBAN) that focuses on a variety of medical, Consumer Electronics (CE) and entertainment applications. In this paper, the throughput and delay performance of the IEEE 802.15.6 is presented. Numerical formulas are derived to determine the maximum throughput and minimum delay limits of the IEEE 802.15.6 for an ideal channel with no transmission errors. These limits are derived for different frequency bands and data rates. Our analysis is validated by extensive simulations using a custom C+ + simulator. Based on analytical and simulation results, useful conclusions are derived for network provisioning and packet size optimization for different applications.

  14. Coupling R and PHREEQC: an interactive and extensible environment for efficient programming of geochemical models

    Science.gov (United States)

    De Lucia, Marco; Kühn, Michael

    2013-04-01

    PHREEQC [1] is a widely used non-interactive open source software for speciation, batch-reactions, one-dimensional transport, and inverse geochemical caclulations. It represents the tool of choice for many researchers and practicioners for a broad set of geochemical problems, underground CO2 storage among others. Its open source nature, the flexibility to program arbitrary kinetic laws for the chemical reactions, as well as a thorough implementation of the Pitzer formalism explain its success and longevity. However, its non-interactive architecture make it cumbersome to couple PHREEQC to transport programs to achieve reactive transport simulations [2], but also to overcome the limitations of PHREEQC itself regarding the setup of large numbers of simulations - for example exploring wide ranges of conditions - and the graphical evaluation of the results. This has been the main motivation leading to the development of an interface with the high level language and environment for statistical computing and graphics GNU R [3]. The interface consists of minor modifications in PHREEQC's C source code, only affecting data I/O, plus on the R side a bunch of helper functions used to setup the simulations - basically automated manipulation of PHREEQC's input files, which are text files - and to collect and visualize the results. The most relevant subset of PHREEQC's capabilities and features are fully usable through the interface. Illustratory examples for the utility of this programmable interface were given in the framework of the research project this developement originated from: CLEAN [4], a project investigating the feasibility of enhanced gas recovery combined with CO2 storage. This interface allowed us to successfully and easily manipulate, compare and refit chemical databases, perform sensitivity analysis by combinatory variations of parameters, and all that in an environment which is both scriptable and interactive, with all results directly available for further

  15. Nursing students’ perceptions of their educational environment in the bachelor’s programs of the Shifa College of Nursing, Pakistan

    Directory of Open Access Journals (Sweden)

    Gideon Victor

    2016-12-01

    Full Text Available Purpose The objective of this study was to evaluate nursing students’ perceptions of their educational environment in a private college. Perceptions were compared between genders and 2 bachelor’s programs. Methods A total of 219 students participated in this study, drawn from the Generic Bachelor of Science in Nursing (GBSN and the Post-Registered Nurse Bachelor of Science in Nursing (PRBSN programs of the Shifa College of Nursing, Islamabad, Pakistan. The Dundee Ready Education Environment Measure was utilized for data collection. Descriptive statistics were used to calculate total scores, as well as means and standard deviations, and the t-test was applied for comparisons according to program and gender. Results The overall total mean score (119 of 200 is suggestive of more positive than negative perceptions of the educational environment. The mean score of 13 of 28 on the social self-perception subscale suggests that the social environment was felt to be ‘not a nice place.’ The t-test revealed more positive perceptions among students enrolled in the PRBSN program (P<0.0001 than among those enrolled in the GBSN program and more positive perceptions among female students than among male students (P<0.0001. Conclusion Commonalities and differences were found in the perceptions of the nursing students. Both positive and negative perceptions were reported; the overall sense of a positive environment was present, but the social component requires immediate attention, along with other unsatisfactory components. Establishing a supportive environment conducive to competence-based learning would play an important role in bringing desirable changes to the educational environment.

  16. A study of System Interface Sets (SIS) for the host, target and integration environments of the Space Station Program (SSP)

    Science.gov (United States)

    Mckay, Charles; Auty, David; Rogers, Kathy

    1987-01-01

    System interface sets (SIS) for large, complex, non-stop, distributed systems are examined. The SIS of the Space Station Program (SSP) was selected as the focus of this study because an appropriate virtual interface specification of the SIS is believed to have the most potential to free the project from four life cycle tyrannies which are rooted in a dependance on either a proprietary or particular instance of: operating systems, data management systems, communications systems, and instruction set architectures. The static perspective of the common Ada programming support environment interface set (CAIS) and the portable common execution environment (PCEE) activities are discussed. Also, the dynamic perspective of the PCEE is addressed.

  17. School Food Environment Promotion Program: Applying the Socio-ecological Approach

    Directory of Open Access Journals (Sweden)

    Fatemeh Bakhtari Aghdam

    2018-01-01

    Full Text Available Background Despite of healthy nutrition recommendations have been offered in recent decades, researches show an increasing rate of unhealthy junk food consumption among primary school children. The aim of this study was to investigate the effects of health promotion intervention on the school food buffets and the changes in nutritional behaviors of the students. Materials and Methods In this Quasi-interventional study, eight schools agreed to participate in Tabriz city, Iran. The schools were randomly selected and divided into an intervention and a control group, and a pretest was given to both groups. A four weeks interventional program was conducted in eight randomly selected schools of the city based on the socio-ecological model. A check list was designed for the assessment of food items available at the schools’ buffets, a 60-item semi-quantitative food frequency questionnaire (FFQ was used to assess the rate of food consumption and energy intake. Results evaluation and practice were analyzed using the Wilcoxon, Mann Whitney-U and Chi-square tests. Results The findings revealed reduction in the intervention group between before and after intervention with regard the range of junk food consumption, except for the sweets consumption. The number of junk foods provided in the schools buffets reduced in the intervention group. After the intervention on the intervention group significant decreases were found in the intake of energy, fat and saturated fatty acids compared to the control group (p = 0.00.   Conclusion In order to design effective school food environment promotion programs, school healthcare providers should consider multifaceted approaches.

  18. A care improvement program acting as a powerful learning environment to support nursing students learning facilitation competencies.

    Science.gov (United States)

    Jukema, Jan S; Harps-Timmerman, Annelies; Stoopendaal, Annemiek; Smits, Carolien H M

    2015-11-01

    Change management is an important area of training in undergraduate nursing education. Successful change management in healthcare aimed at improving practices requires facilitation skills that support teams in attaining the desired change. Developing facilitation skills in nursing students requires formal educational support. A Dutch Regional Care Improvement Program based on a nationwide format of change management in healthcare was designed to act as a Powerful Learning Environment for nursing students developing competencies in facilitating change. This article has two aims: to provide comprehensive insight into the program components and to describe students' learning experiences in developing their facilitation skills. This Dutch Regional Care Improvement Program considers three aspects of a Powerful Learning Environment: self-regulated learning; problem-based learning; and complex, realistic and challenging learning tasks. These three aspects were operationalised in five distinct areas of facilitation: increasing awareness of the need for change; leadership and project management; relationship building and communication; importance of the local context; and ongoing monitoring and evaluation. Over a period of 18 months, 42 nursing students, supported by trained lecturer-coaches, took part in nine improvement teams in our Regional Care Improvement Program, executing activities in all five areas of facilitation. Based on the students' experiences, we propose refinements to various components of this program, aimed at strengthenin the learning environment. There is a need for further detailed empirical research to study the impact this kind of learning environment has on students developing facilitation competencies in healthcare improvement. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Recommendations for Guidelines for Environment-Specific Magnetic-Field Measurements, Rapid Program Engineering Project #2

    Energy Technology Data Exchange (ETDEWEB)

    Electric Research and Management, Inc.; IIT Research Institute; Magnetic Measurements; Survey Research Center, University of California; T. Dan Bracken, Inc.

    1997-03-11

    The purpose of this project was to document widely applicable methods for characterizing the magnetic fields in a given environment, recognizing the many sources co-existing within that space. The guidelines are designed to allow the reader to follow an efficient process to (1) plan the goals and requirements of a magnetic-field study, (2) develop a study structure and protocol, and (3) document and carry out the plan. These guidelines take the reader first through the process of developing a basic study strategy, then through planning and performing the data collection. Last, the critical factors of data management, analysis reporting, and quality assurance are discussed. The guidelines are structured to allow the researcher to develop a protocol that responds to specific site and project needs. The Research and Public Information Dissemination Program (RAPID) is based on exposure to magnetic fields and the potential health effects. Therefore, the most important focus for these magnetic-field measurement guidelines is relevance to exposure. The assumed objective of an environment-specific measurement is to characterize the environment (given a set of occupants and magnetic-field sources) so that information about the exposure of the occupants may be inferred. Ideally, the researcher seeks to obtain complete or "perfect" information about these magnetic fields, so that personal exposure might also be modeled perfectly. However, complete data collection is not feasible. In fact, it has been made more difficult as the research field has moved to expand the list of field parameters measured, increasing the cost and complexity of performing a measurement and analyzing the data. The guidelines address this issue by guiding the user to design a measurement protocol that will gather the most exposure-relevant information based on the locations of people in relation to the sources. We suggest that the "microenvironment" become the base unit of area in a study, with

  20. An IEEE 802.11 EDCA Model with Support for Analysing Networks with Misbehaving Nodes

    Directory of Open Access Journals (Sweden)

    Szott Szymon

    2010-01-01

    Full Text Available We present a novel model of IEEE 802.11 EDCA with support for analysing networks with misbehaving nodes. In particular, we consider backoff misbehaviour. Firstly, we verify the model by extensive simulation analysis and by comparing it to three other IEEE 802.11 models. The results show that our model behaves satisfactorily and outperforms other widely acknowledged models. Secondly, a comparison with simulation results in several scenarios with misbehaving nodes proves that our model performs correctly for these scenarios. The proposed model can, therefore, be considered as an original contribution to the area of EDCA models and backoff misbehaviour.

  1. Reactive GTS Allocation Protocol for Sporadic Events Using the IEEE 802.15.4

    Directory of Open Access Journals (Sweden)

    Mukhtar Azeem

    2014-01-01

    by the IEEE 802.15.4 standard. The proposed control protocol ensures that a given offline sporadic schedule can be adapted online in a timely manner such that the static periodic schedule has not been disturbed and the IEEE 802.15.4 standard compliance remains intact. The proposed protocol is simulated in OPNET. The simulation results are analyzed and presented in this paper to prove the correctness of the proposed protocol regarding the efficient real-time sporadic event delivery along with the periodic event propagation.

  2. Analysis Of Impact Of Various Parameters On BER Performance For IEEE 802.11b

    Directory of Open Access Journals (Sweden)

    Nilesh B. Kalani

    2015-08-01

    Full Text Available Abstract This paper discusses about IEEE 802.11b simulation model implemented using LabVIEW software and its analyses for impact on bit error rate BER for different parameters as channel type channel number data transmission rate and packet size. Audio file is being transmitted processed and analyzed using the model for various parameters. This paper gives analysis of BER verses ESN0 for various parameter like data rate packet size and communication channel for the IEEE 802.11b simulation model generated using LabVIEW. It is proved that BER can be optimized by tweaking different parameters of wireless communication system.

  3. Spectrum Hole Identification in IEEE 802.22 WRAN using Unsupervised Learning

    OpenAIRE

    V. Balaji; S. Anand; C.R. Hota; G. Raghurama

    2016-01-01

    In this paper we present a Cooperative Spectrum Sensing (CSS) algorithm for Cognitive Radios (CR) based on IEEE 802.22Wireless Regional Area Network (WRAN) standard. The core objective is to improve cooperative sensing efficiency which specifies how fast a decision can be reached in each round of cooperation (iteration) to sense an appropriate number of channels/bands (i.e. 86 channels of 7MHz bandwidth as per IEEE 802.22) within a time constraint (channel sensing time). To meet this objectiv...

  4. Self-Coexistence among IEEE 802.22 Networks: Distributed Allocation of Power and Channel

    OpenAIRE

    Sayef Azad Sakin; Md. Abdur Razzaque; Mohammad Mehedi Hassan; Atif Alamri; Nguyen H. Tran; Giancarlo Fortino

    2017-01-01

    Ensuring self-coexistence among IEEE 802.22 networks is a challenging problem owing to opportunistic access of incumbent-free radio resources by users in co-located networks. In this study, we propose a fully-distributed non-cooperative approach to ensure self-coexistence in downlink channels of IEEE 802.22 networks. We formulate the self-coexistence problem as a mixed-integer non-linear optimization problem for maximizing the network data rate, which is an NP-hard one. This work explores a s...

  5. International Conference on Grey Systems and intelligent Services (IEEE GSIS 2009)

    CERN Document Server

    Liu, Sifeng; Advances in Grey Systems Research

    2010-01-01

    This book contains contributions by some of the leading researchers in the area of grey systems theory and applications. All the papers included in this volume are selected from the contributions physically presented at the 2009 IEEE International Conference on Grey Systems and Intelligent Services, November 11 – 12, 2009, Nanjing, Jiangsu, People’s Republic of China. This event was jointly sponsored by IEEE Systems, Man, and Cybernetics Society, Natural Science Foundation of China, and Grey Systems Society of China. Additionally, Nanjing University of Aeronautics and Astronautics also invested heavily in this event with its direct and indirect financial and administrative supports.

  6. IEEE 802.11e (EDCA analysis in the presence of hidden stations

    Directory of Open Access Journals (Sweden)

    Xijie Liu

    2011-07-01

    Full Text Available The key contribution of this paper is the combined analytical analysis of both saturated and non-saturated throughput of IEEE 802.11e networks in the presence of hidden stations. This approach is an extension to earlier works by other authors which provided Markov chain analysis to the IEEE 802.11 family under various assumptions. Our approach also modifies earlier expressions for the probability that a station transmits a packet in a vulnerable period. The numerical results provide the impact of the access categories on the channel throughput. Various throughput results under different mechanisms are presented.

  7. Sowing the Seeds of Strategic Success Across West Africa: Propagating the State Partnership Program to Shape the Security Environment

    Science.gov (United States)

    2017-06-09

    region’s continued growth in economics , population, influence, and the correlating 17 increase in risks to stability from radicalization and...environment and stem the tide of regional instability . The National Guard’s State Partnership Program is a security cooperation tool that Geographic... instability . The National Guard’s State Partnership Program is a security cooperation tool that Geographic Combatant Commanders can leverage to enhance the

  8. RT/OS - realtime programming and application environment for the COSY control system

    International Nuclear Information System (INIS)

    Weinert, A.; Hacker, U.; Haberbosch, Ch.; Henn, K.; Simon, M.

    1994-01-01

    This paper presents the highlights and constraints of RT/OS and how it can be used at other places. The support of approximately 1000 VME and VXI CPUs in network-based multiprocessor systems needs a special set of programming tools and application environment which are bundled as the RT/OS Real-Time-Operating-System. Supporting the Motorola 680x0 processors and micro-controller with a development system on UNIX and MS-DOS platforms, the tool set gives the opportunity of bringing small embedded controllers as well as VME multiprocessor systems into operation. The tool set includes a cross compiler and a special version of a remote debugger, as well as application support such as downloading and configuration management. The main feature is a modular kernel with message-based task switching, using the rendezvous principle to allow easy extension. Special features of this kernel for a distributed system are networking with the Berkeley socket library supporting TCP/IP, XNS and Novell Netware, a multiprocessor system on VMEbus with the interprocessor Communication Module (IPC), a device driver library for almost every G64 I/O card using a FieldBus Interface called PDV and a X11R4 port. ((orig.))

  9. RT/OS - realtime programming and application environment for the COSY control system

    Energy Technology Data Exchange (ETDEWEB)

    Weinert, A [Forschungszentrum, Juelich, Postfach 1913, 52425 Juelich (Germany); Hacker, U [Forschungszentrum, Juelich, Postfach 1913, 52425 Juelich (Germany); Haberbosch, Ch [Forschungszentrum, Juelich, Postfach 1913, 52425 Juelich (Germany); Henn, K [Forschungszentrum, Juelich, Postfach 1913, 52425 Juelich (Germany); Simon, M [Forschungszentrum, Juelich, Postfach 1913, 52425 Juelich (Germany)

    1994-12-15

    This paper presents the highlights and constraints of RT/OS and how it can be used at other places. The support of approximately 1000 VME and VXI CPUs in network-based multiprocessor systems needs a special set of programming tools and application environment which are bundled as the RT/OS Real-Time-Operating-System. Supporting the Motorola 680x0 processors and micro-controller with a development system on UNIX and MS-DOS platforms, the tool set gives the opportunity of bringing small embedded controllers as well as VME multiprocessor systems into operation. The tool set includes a cross compiler and a special version of a remote debugger, as well as application support such as downloading and configuration management. The main feature is a modular kernel with message-based task switching, using the rendezvous principle to allow easy extension. Special features of this kernel for a distributed system are networking with the Berkeley socket library supporting TCP/IP, XNS and Novell Netware, a multiprocessor system on VMEbus with the interprocessor Communication Module (IPC), a device driver library for almost every G64 I/O card using a FieldBus Interface called PDV and a X11R4 port. ((orig.))

  10. Using Python as a first programming environment for computational physics in developing countries

    Science.gov (United States)

    Akpojotor, Godfrey; Ehwerhemuepha, Louis; Echenim, Myron; Akpojotor, Famous

    2011-03-01

    Python unique features such its interpretative, multiplatform and object oriented nature as well as being a free and open source software creates the possibility that any user connected to the internet can download the entire package into any platform, install it and immediately begin to use it. Thus Python is gaining reputation as a preferred environment for introducing students and new beginners to programming. Therefore in Africa, the Python African Tour project has been launched and we are coordinating its use in computational science. We examine here the challenges and prospects of using Python for computational physics (CP) education in developing countries (DC). Then we present our project on using Python to simulate and aid the learning of laboratory experiments illustrated here by modeling of the simple pendulum and also to visualize phenomena in physics illustrated here by demonstrating the wave motion of a particle in a varying potential. This project which is to train both the teachers and our students on CP using Python can easily be adopted in other DC.

  11. 1999 IEEE international geoscience and remote sensing symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    The theme of IGARSS'99, ``Remote Sensing of the System Earth--A Challenge for the 21st Century,'' shows how earth observation based on satellite remote sensing can significantly contribute to the future study of the environment and the changes it is undergoing, whether from natural causes or human activities. The wide range of topics offers an interdisciplinary approach and suggests integrated techniques and theory in remote sensing are essential for modeling and understanding the environment. Topics covered include: new instrumentation and future systems; high resolution SAR/InSAR; earth system science educational initiative; data fusion; radar sensing of ice sheets; image processing techniques; clouds and ice particles; internal waves; natural hazards and disaster monitoring; advanced passive and active sensors and sensor calibration; radar assessment of rain, oil spills and natural slicks; data standards and distribution; and vegetation monitoring using BRDF approaches.

  12. The Skype-Buddy Model in an Online Environment: Patterns and Perceptions of Language Teachers in a Professional Development Program

    Science.gov (United States)

    Macharaschwili, Carmen E.

    2013-01-01

    Patterns and perceptions of language teachers in a professional development program were examined through various forms of classroom discourse & multimodal products. Research questions include: What kinds of learning patterns emerge with the use of Skype in an online environment? What phases of cognitive engagement are evident in Skype…

  13. One size fits all? : optimization of rainbow trout breeding program under diverse preferences and genotype-by-environment interaction

    NARCIS (Netherlands)

    Sae-Lim, P.

    2013-01-01

    Global fish breeders distribute improved animal material to several continents to be farmed under diverse environments, and for very different market conditions. When establishing a global breeding program, there is a need to assess whether or not a single breeding objective satisfies the

  14. Creating and Maintaining a Wellness Environment in Child Care Centers Participating in the Child and Adult Care Food Program

    Science.gov (United States)

    Lofton, Kristi L.; Carr, Deborah H.

    2010-01-01

    Purpose/Objectives: This study identifies issues associated with creating and maintaining a wellness environment in child care centers (CCCs) participating in the Child and Adult Care Food Program (CACFP). Methods: Structured interviews and focus groups were conducted with CCC professionals and state agency personnel to develop a survey to assess…

  15. Evaluation of Learning Environments for Object-Oriented Programming: Measuring Cognitive Load with a Novel Measurement Technique

    Science.gov (United States)

    Uysal, Murat Pasa

    2016-01-01

    Various methods and tools have been proposed to overcome the learning obstacles for Object-Oriented Programming (OOP). However, it remains difficult especially for novice learners. The problem may be not only adopting an instructional method, but also an Integrated Development Environment (IDE). Learners employ IDEs as a means to solve programming…

  16. The Student-Centered Active Learning Environment for Undergraduate Programs (SCALE-UP) Project

    Science.gov (United States)

    Beichner, Robert J.

    2011-04-01

    How do you keep a classroom of 100 undergraduates actively learning? Can students practice communication and teamwork skills in a large class? How do you boost the performance of underrepresented groups? The Student-Centered Active Learning Environment for Undergraduate Programs (SCALE-UP) Project has addressed these concerns. Because of their inclusion in a leading introductory physics textbook, project materials are used by more than 1/3 of all science, math, and engineering majors nationwide. The room design and pedagogy have been adopted at more than 100 leading institutions across the country. Physics, chemistry, math, astronomy, biology, engineering, earth sciences, and even literature classes are currently being taught this way. Educational research indicates that students should collaborate on interesting tasks and be deeply involved with the material they are studying. We promote active learning in a redesigned classroom for 100 students or more. (Of course, smaller classes can also benefit.) Class time is spent primarily on "tangibles" and "ponderables"--hands-on activities, simulations, and interesting questions. Nine students sit in three teams at round tables. Instructors circulate and engage in Socratic dialogues. The setting looks like a banquet hall, with lively interactions nearly all the time. Hundreds of hours of classroom video and audio recordings, transcripts of numerous interviews and focus groups, data from conceptual learning assessments (using widely-recognized instruments in a pretest/posttest protocol), and collected portfolios of student work are part of our rigorous assessment effort. Our findings (based on data from over 16,000 students collected over five years as well as replications at adopting sites) can be summarized as the following: 1) Female failure rate is 1/5 of previous levels, even though more is demanded of students. 2) Minority failure rate is 1/4 that seen in traditionally taught courses. 3) At-risk students are more

  17. 75 FR 73946 - Worker Safety and Health Program: Safety Conscious Work Environment

    Science.gov (United States)

    2010-11-30

    ... Environment AGENCY: Office of the General Counsel, Department of Energy (DOE). ACTION: Notice of denial of... Nuclear Regulatory Commission's ``Safety-Conscious Work Environment'' guidelines as a model. DOE published.... Second, not only would instituting a ``Safety-Conscious Work Environment'' by regulation be redundant...

  18. The tree identify protocol of IEEE 1394 in uCRL

    NARCIS (Netherlands)

    C. Shankland; M.B. van der Zwaag

    1998-01-01

    textabstractWe specify the tree identify protocol of the IEEE 1394 high performance serial multimedia bus at three different levels of detail using $mu$CRL. We use the cones and foci verification technique of Groote and Springintveld to show that the descriptions are equivalent under branching

  19. A 1-GHz charge pump PLL frequency synthesizer for IEEE 1394b PHY

    DEFF Research Database (Denmark)

    Ji, J.; Liu, H.; Li, Q.

    2012-01-01

    This paper presents an implementation of multi-rate SerDes transceiver for IEEE 1394b applications. Simple and effective pre-emphasis and equalizer circuits are used at transmitter and receiver, respectively. A phase interpolator based clock and data recovery circuit with optimized linearity is a...

  20. Energy-aware path selection metric for IEEE 802.11s wireless mesh networking

    CSIR Research Space (South Africa)

    Mhlanga, MM

    2009-01-01

    Full Text Available The IEEE 802.11s working group has commenced activities, which would lead to the development of a standard for wireless mesh networks (WMNs). The draft of 802.11s introduces a new path selection metric called airtime link metric. However...

  1. Energy-aware path selection metric for IEEE 802.11s wireless mesh networking

    CSIR Research Space (South Africa)

    Mhlanga, MM

    2009-08-01

    Full Text Available The IEEE 802.11s working group has commenced activities, which would lead to the development of a standard for wireless mesh networks (WMNs). The draft of 802.11s introduces a new path selection metric called airtime link metric. However...

  2. IEEE 8023 ethernet, current status and future prospects at the LHC

    CERN Document Server

    Dobinson, Robert W; Haas, S; Martin, B; Le Vine, M J; Saka, F

    2000-01-01

    The status of the IEEE 802.3 standard is reviewed and prospects for the future, including the new 10 Gigabit version of Ethernet, are discussed. The relevance of Ethernet for experiments at the CERN Large Hadron Collider is considered, with emphasis on on-line applications and areas which are technically challenging. 8 Refs.

  3. IEEE 802.3 Ethernet, Current Status and Future Prospects at the LHC

    CERN Document Server

    Dobinson, Robert W; Haas, S W; Martin, B; Le Vine, M J; Saka, F

    2000-01-01

    The status of the IEEE 802.3 standard is reviewed and prospects for the future, including the new 10 Gigabit version of Ethernet, are discussed. The relevance of Ethernet for experiments at the CERN Large Hadron Collider is considered, with emphasis on on-line applications and areas which are technically challenging.

  4. Performance Evaluations for IEEE 802.15.4-based IoT Smart Home Solution

    Directory of Open Access Journals (Sweden)

    Nga Dinh

    2016-09-01

    Full Text Available The Internet of Things (IoT is going to be a market-changing force for a variety of real-time applications such as e-healthcare, home automation, environmental monitoring, and industrial automation. Low power wireless communication protocols offering long lifetime and high reliability such as the IEEE 802.15.4 standard have been a key enabling technology for IoT deployments and are deployed for home automation recently. The issues of the IEEE 802.15.4 networks have moved from theory to real world deployments. The work presented herein intends to demonstrate the use of the IEEE 802.15.4 standard in recent IoT commercial products for smart home applications: the Smart Home Starter Kit. The contributions of the paper are twofold. First, the paper presents how the IEEE 802.15.4 standard is employed in Smart Home Starter Kit. In particular, network topology, network operations, and data transfer mode are investigated. Second, network performance metrics such as end-to-end (E2E delay and frame reception ratio (FRR are evaluated by experiments. In addition, the paper discusses several directions for future improvements of home automation commercial products.

  5. The IEEE-SA patent policy update under the lens of EU competition law

    NARCIS (Netherlands)

    Kanevskaia, Olia; Zingales, Nicolo

    2016-01-01

    In 2015, the Institute of Electrical and Electronics Engineers (IEEE) Standardization Association made some controversial changes to its patent policy. The changes include a recommended method of calculation of FRAND royalty rates, and a request to members holding a standard essential patent (SEP)

  6. 0011-0030.IEEE 754: 64 Bit Double Precision FloatsThis.pdf | 01 ...

    Indian Academy of Sciences (India)

    Home; public; Volumes; reso; 021; 01; 0011-0030.IEEE 754: 64 Bit Double Precision FloatsThis.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 ...

  7. Evaluation of the Effects of Hidden Node Problems in IEEE 802.15.7 Uplink Performance.

    Science.gov (United States)

    Ley-Bosch, Carlos; Alonso-González, Itziar; Sánchez-Rodríguez, David; Ramírez-Casañas, Carlos

    2016-02-06

    In the last few years, the increasing use of LEDs in illumination systems has been conducted due to the emergence of Visible Light Communication (VLC) technologies, in which data communication is performed by transmitting through the visible band of the electromagnetic spectrum. In 2011, the Institute of Electrical and Electronics Engineers (IEEE) published the IEEE 802.15.7 standard for Wireless Personal Area Networks based on VLC. Due to limitations in the coverage of the transmitted signal, wireless networks can suffer from the hidden node problems, when there are nodes in the network whose transmissions are not detected by other nodes. This problem can cause an important degradation in communications when they are made by means of the Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) access control method, which is used in IEEE 802.15.7 This research work evaluates the effects of the hidden node problem in the performance of the IEEE 802.15.7 standard We implement a simulator and analyze VLC performance in terms of parameters like end-to-end goodput and message loss rate. As part of this research work, a solution to the hidden node problem is proposed, based on the use of idle patterns defined in the standard. Idle patterns are sent by the network coordinator node to communicate to the other nodes that there is an ongoing transmission. The validity of the proposed solution is demonstrated with simulation results.

  8. Adaptive Radio Resource Allocation in Hierarchical QoS Scheduling for IEEE 802.16 Systems

    DEFF Research Database (Denmark)

    Wang, Hua; Dittmann, Lars

    2007-01-01

    Future mobile communication systems such as IEEE 802.16 are expected to deliver a variety of multimedia services with diverse QoS requirements. To guarantee the QoS provision, appropriate scheduler architecture and scheduling algorithms have to be carefully designed. In this paper, we propose...

  9. Evaluation of H.264/AVC over IEEE 802.11p vehicular networks

    Science.gov (United States)

    Rozas-Ramallal, Ismael; Fernández-Caramés, Tiago M.; Dapena, Adriana; García-Naya, José Antonio

    2013-12-01

    The capacity of vehicular networks to offer non-safety services, like infotainment applications or the exchange of multimedia information between vehicles, have attracted a great deal of attention to the field of Intelligent Transport Systems (ITS). In particular, in this article we focus our attention on IEEE 802.11p which defines enhancements to IEEE 802.11 required to support ITS applications. We present an FPGA-based testbed developed to evaluate H.264/AVC (Advanced Video Coding) video transmission over vehicular networks. The testbed covers some of the most common situations in vehicle-to-vehicle and roadside-to-vehicle communications and it is highly flexible, allowing the performance evaluation of different vehicular standard configurations. We also show several experimental results to illustrate the quality obtained when H.264/AVC encoded video is transmitted over IEEE 802.11p networks. The quality is measured considering two important parameters: the percentage of recovered group of pictures and the frame quality. In order to improve performance, we propose to substitute the convolutional channel encoder used in IEEE 802.11p for a low-density parity-check code encoder. In addition, we suggest a simple strategy to decide the optimum number of iterations needed to decode each packet received.

  10. IEEE Conference Record of 1980 Fourteenth Pulse Power Modulator Symposium, 3-5 June 1980.

    Science.gov (United States)

    1980-01-01

    Capacitor Discharges, Proc IEEE 113, p. able operation on Nova we are examing alter- 1549 (1966). nate switch gas (Ar:N 2 :SF 6 ) and electrode material...VOLTTA-KILOVOLTS PLATE VO LTAM --LOVLTS Figure 8. Constant Current Curve for the X2097U Figure 11. Constant Current Curve for the X2097V at 2000 Volt

  11. Oldest Packet Drop (OPD): a Buffering Mechanism for Beaconing in IEEE 802.11p VANETs

    NARCIS (Netherlands)

    van Eenennaam, Martijn; Hendriks, Luuk; Karagiannis, Georgios; Heijenk, Geert

    2011-01-01

    The IEEE 802.11p MAC technology can be used to provide connectivity for real-time vehicle control known as Cooperative Adaptive Cruise Control. Due to the real-time nature of this system, it is paramount the delay of the received information is as small as possible. This paper researches the Oldest

  12. A Comprehensive Taxonomy and Analysis of IEEE 802.15.4 Attacks

    Directory of Open Access Journals (Sweden)

    Yasmin M. Amin

    2016-01-01

    Full Text Available The IEEE 802.15.4 standard has been established as the dominant enabling technology for Wireless Sensor Networks (WSNs. With the proliferation of security-sensitive applications involving WSNs, WSN security has become a topic of great significance. In comparison with traditional wired and wireless networks, WSNs possess additional vulnerabilities which present opportunities for attackers to launch novel and more complicated attacks against such networks. For this reason, a thorough investigation of attacks against WSNs is required. This paper provides a single unified survey that dissects all IEEE 802.15.4 PHY and MAC layer attacks known to date. While the majority of existing references investigate the motive and behavior of each attack separately, this survey classifies the attacks according to clear metrics within the paper and addresses the interrelationships and differences between the attacks following their classification. The authors’ opinions and comments regarding the placement of the attacks within the defined classifications are also provided. A comparative analysis between the classified attacks is then performed with respect to a set of defined evaluation criteria. The first half of this paper addresses attacks on the IEEE 802.15.4 PHY layer, whereas the second half of the paper addresses IEEE 802.15.4 MAC layer attacks.

  13. Interference Measurements in IEEE 802.11 Communication Links Due to Different Types of Interference Sources

    NARCIS (Netherlands)

    van Bloem, J.W.H.; Schiphorst, Roelof; Kluwer, Taco; Slump, Cornelis H.

    2012-01-01

    The number of wireless devices (smartphones, laptops, sensors) that use the 2.4 GHz ISM band is rapidly increasing. The most common communication system in this band is Wi-Fi (IEEE 802.11b/g/n). For that reason coexistence between Wi-Fi and other systems becomes more and more important. In this

  14. Performance Analysis of Non-saturated IEEE 802.11 DCF Networks

    Science.gov (United States)

    Zhai, Linbo; Zhang, Xiaomin; Xie, Gang

    This letter presents a model with queueing theory to analyze the performance of non-saturated IEEE 802.11 DCF networks. We use the closed queueing network model and derive an approximate representation of throughput which can reveal the relationship between the throughput and the total offered load under finite traffic load conditions. The accuracy of the model is verified by extensive simulations.

  15. IEEE 802.11 Wireless LANs: Performance Analysis and Protocol Refinement

    Directory of Open Access Journals (Sweden)

    Chatzimisios P.

    2005-01-01

    Full Text Available The IEEE 802.11 protocol is emerging as a widely used standard and has become the most mature technology for wireless local area networks (WLANs. In this paper, we focus on the tuning of the IEEE 802.11 protocol parameters taking into consideration, in addition to throughput efficiency, performance metrics such as the average packet delay, the probability of a packet being discarded when it reaches the maximum retransmission limit, the average time to drop a packet, and the packet interarrival time. We present an analysis, which has been validated by simulation that is based on a Markov chain model commonly used in the literature. We further study the improvement on these performance metrics by employing suitable protocol parameters according to the specific communication needs of the IEEE 802.11 protocol for both basic access and RTS/CTS access schemes. We show that the use of a higher initial contention window size does not considerably degrade performance in small networks and performs significantly better in any other scenario. Moreover, we conclude that the combination of a lower maximum contention window size and a higher retry limit considerably improves performance. Results indicate that the appropriate adjustment of the protocol parameters enhances performance and improves the services that the IEEE 802.11 protocol provides to various communication applications.

  16. Performance characterization of the IEEE 802.11 signal transmission over a multimode fiber PON

    Science.gov (United States)

    Maksymiuk, L.; Siuzdak, J.

    2014-11-01

    In this paper there are presented measurements concerning performance analysis of the IEEE 802.11 signal distribution over multimode fiber based passive optical network. In the paper there are addressed three main sources of impairments: modal noise, frequency response fluctuation of the multimode fiber and non-linear distortion of the signal in the receiver.

  17. Multitemporal Very High Resolution From Space: Outcome of the 2016 IEEE GRSS Data Fusion Contest

    NARCIS (Netherlands)

    Mou, L.; Zhu, X.; Vakalopoulou, M.; Karantzalos, K.; Paragios, N.; Saux, Le B.; Moser, G.; Tuia, D.

    2017-01-01

    In this paper, the scientific outcomes of the 2016 Data Fusion Contest organized by the Image Analysis and Data Fusion Technical Committee of the IEEE Geoscience and Remote Sensing Society are discussed. The 2016 Contest was an open topic competition based on a multitemporal and multimodal dataset,

  18. Outdoor Long-Range WLANs : A Lesson for IEEE 802.11ah

    NARCIS (Netherlands)

    Aust, Stefan; Venkatesha Prasad, R.; Niemegeers, Ignas G M M

    2015-01-01

    Several service applications have been reported by many who proposed the use of wireless LANs (WLANs) over a wide variety of outdoor deployments. In particular, the upcoming IEEE 802.11ah WLAN protocol will enable a longer transmission range between WLAN access points (APs) and stations (STAs) up to

  19. Incorporating antenna beamswitching technique into drivers for IEEE802.11 WLAN devices

    CSIR Research Space (South Africa)

    Mofolo, M

    2015-11-23

    Full Text Available the beamswitching technique for switched parasitic array (SPA) and electronically steerable parasitic array radiator (ESPAR) antennas in the drivers for IEEE802.11 WLAN devices. The modifications of the open source drivers (ath5k and ath9k) to enable real...

  20. DNA Radiation Environments Program: Fall 1989 2-meter box experiments and analysis

    International Nuclear Information System (INIS)

    Santoro, R.T.

    1991-05-01

    This effort, sponsored by the Defense Nuclear Agency under the Radiation Environments Program, was carried out to obtain measured data for benchmarking MASH, the Monte Carlo Adjoint Code System. MASH was developed to replace the Vehicle Code System, VCS, that has been used by the Department of Defense and NATO for calculating neutron and gamma-ray radiation fields and shielding protection factors inside armored vehicles and structures from nuclear weapon radiation. Free-field data were obtained at distances of 170- and 400-meters from the APR while in-box measurements were made at 400 meters only. The box, included to obtain neutron and gamma-ray reduction factors, was a 2-meter cube configuration having 0.1016-m-thick steel walls. Calculated data were obtained using MASH by analysts from the Oak Ridge National Laboratory and Science Applications International Corporation. Calculated (C) results were compared with experimental (E) data in terms of C/E ratios. Free-field and in-box neutron kerma generally agreed within ±20%, although some C/E comparisons fell outside this range depending upon the detector against which the calculated data were compared. For those cases where the C/E ratio is marginal or unacceptable, problems in the detector systems were acknowledged to be principal cause of the discrepancy. Generally poor agreement (∼25-35%) was achieved among the C/E ratios for the free-field gamma-ray kerma at the 170- and 400-m locations while excellent (10%, or better) C/E values were obtained for the in-box conditions. The discrepancy for the free-field comparison was attributed to the failure by the analysts to include a tree line adjacent to the measurement site in the calculational geometry. C/E values for the neutron and gamma-ray reduction factors ranged from 1% to 23% depending on the detector. 4 refs., 2 figs., 14 tabs

  1. A versatile trigger and synchronization module with IEEE1588 capabilities and EPICS support

    International Nuclear Information System (INIS)

    Lopez, J.M.; Ruiz, M.; Borrego, J.; Arcas, G. de; Barrera, E.; Vega, J.

    2010-01-01

    Event timing and synchronization are two key aspects to improve in the implementation of distributed data acquisition (dDAQ) systems such as the ones used in fusion experiments. It is also of great importance the integration of dDAQ in control and measurement networks. This paper analyzes the applicability of the IEEE1588 and EPICS standards to solve these problems, and presents a hardware module implementation based in both of them that allow adding these functionalities to any DAQ. The IEEE1588 standard facilitates the integration of event timing and synchronization mechanisms in distributed data acquisition systems based on IEEE 803.3 (Ethernet). An optimal implementation of such system requires the use of network interface devices which include specific hardware resources devoted to the IEE1588 functionalities. Unfortunately, this is not the approach followed in most of the large number of applications available nowadays. Therefore, most solutions are based in software and use standard hardware network interfaces. This paper presents the development of a hardware module (GI2E) with IEEE1588 capabilities which includes USB, RS232, RS485 and CAN interfaces. This permits to integrate any DAQ element that uses these interfaces in dDAQ systems in an efficient and simple way. The module has been developed with Motorola's Coldfire MCF5234 processor and National Semiconductors's PHY DP83640T, providing it with the possibility to implement the PTP protocol of IEEE1588 by hardware, and therefore increasing its performance over other implementations based in software. To facilitate the integration of the dDAQ system in control and measurement networks the module includes a basic Input/Output Controller (IOC) functionality of the Experimental Physics and Industrial Control System (EPICS) architecture. The paper discusses the implementation details of this module and presents its applications in advanced dDAQ applications in the fusion community.

  2. Evolution of the Business Environment Surrounding the UK's Nuclear Site Cleanup Program

    International Nuclear Information System (INIS)

    Miskimin, P.A.; Lees, P.M.; Wall, C.E.E.

    2006-01-01

    In April 2005 twenty civil nuclear sites in the United Kingdom became the responsibility of the Nuclear Decommissioning Authority (NDA), a new organization created by the British Government to manage the cleanup of these sites. As a key part of this transition, the NDA became the owner and manager of these sites, which formerly were owned by the site operators, British Nuclear Fuels Limited plc (BNFL) and the United Kingdom Atomic Energy Authority (UKAEA). This was one of the most significant events in the history of the United Kingdom's nuclear industry and represented a true sea change, affecting many aspects of life and business on and around these sites as well as nationally. The NDA's budget for the cleanup of the twenty sites and the management of the overall cleanup program is approximately pounds 2 Billion per annum, almost $4 Billion. It is important to note that approximately half of this amount is spent with the supply chains which serve the management and operations contractors, including pounds 500 million at Sellafield alone. Additionally, the site management and operations contractors receive most of the pounds 2 Billion through contracts between the NDA and the various site management companies. This represents a lot of government money moving through contracts between entities, which invokes procurement and contracting rules and regulations, that while not new, have not previously been this broadly applied to nuclear site cleanup activities throughout the UK. The current estimate for the total life cycle cleanup costs for all twenty civil nuclear sites is pounds 56 Billion, a figure that is likely to increase further. The first rules to mention are the European Union Procurement Guidelines, which are designed to help ensure that procurements involving government funds are conducted in an open, fair, and transparent environment. While it is difficult to argue with the intent of these rules, at least for now they are having a slowing down effect on

  3. Best practices: an electronic drug alert program to improve safety in an accountable care environment.

    Science.gov (United States)

    Griesbach, Sara; Lustig, Adam; Malsin, Luanne; Carley, Blake; Westrich, Kimberly D; Dubois, Robert W

    2015-04-01

    The accountable care organization (ACO), one of the most promising and talked about new models of care, focuses on improving communication and care transitions by tying potential shared savings to specific clinical and financial benchmarks. An important factor in meeting these benchmarks is an ACO's ability to manage medications in an environment where medical and pharmacy care has been integrated. The program described in this article highlights the critical components of Marshfield Clinic's Drug Safety Alert Program (DSAP), which focuses on prioritizing and communicating safety issues related to medications with the goal of reducing potential adverse drug events. Once the medication safety concern is identified, it is reviewed to evaluate whether an alert warrants sending prescribers a communication that identifies individual patients or a general communication to all physicians describing the safety concern. Instead of basing its decisions regarding clinician notification about drug alerts on subjective criteria, the Marshfield Clinic's DSAP uses an internally developed scoring system. The scoring system includes criteria developed from previous drug alerts, such as level of evidence, size of population affected, severity of adverse event identified or targeted, litigation risk, available alternatives, and potential for duration of medication use. Each of the 6 criteria is assigned a weight and is scored based upon the content and severity of the alert received.  In its first 12 months, the program targeted 6 medication safety concerns involving the following medications: topiramate, glyburide, simvastatin, citalopram, pioglitazone, and lovastatin. Baseline and follow-up prescribing data were gathered on the targeted medications. Follow-up review of prescribing data demonstrated that the DSAP provided quality up-to-date safety information that led to changes in drug therapy and to decreases in potential adverse drug events. In aggregate, nearly 10,000 total

  4. 77 FR 38709 - Surface Transportation Environment and Planning Cooperative Research Program (STEP)

    Science.gov (United States)

    2012-06-28

    ... Planning Cooperative Research Program (STEP) AGENCY: Federal Highway Administration (FHWA), DOT. ACTION... Research Program (STEP). The FHWA anticipates that the STEP or a similar program to provide resources for... stakeholders that can leverage limited research funding in the STEP with other stakeholders and partners in...

  5. 75 FR 38605 - Surface Transportation Environment and Planning Cooperative Research Program (STEP)

    Science.gov (United States)

    2010-07-02

    ... Planning Cooperative Research Program (STEP) AGENCY: Federal Highway Administration (FHWA), DOT. ACTION... Research Program (STEP). The FHWA anticipates that the STEP or a similar program to provide resources for... limited research funding in the STEP with other stakeholders and partners in order to increase the total...

  6. 76 FR 50312 - Surface Transportation Environment and Planning Cooperative Research Program (STEP)

    Science.gov (United States)

    2011-08-12

    ... Planning Cooperative Research Program (STEP) AGENCY: Federal Highway Administration (FHWA), DOT. ACTION... Research Program (STEP). The FHWA anticipates that the STEP or a similar program to provide resources for... limited research funding in the STEP with other stakeholders and partners in order to increase the total...

  7. Active Participation of Integrated Development Environments in the Teaching of Object-Oriented Programming

    Science.gov (United States)

    Depradine, Colin; Gay, Glenda

    2004-01-01

    With the strong link between programming and the underlying technology, the incorporation of computer technology into the teaching of a programming language course should be a natural progression. However, the abstract nature of programming can make such integration a difficult prospect to achieve. As a result, the main development tool, the…

  8. Programming

    International Nuclear Information System (INIS)

    Jackson, M.A.

    1982-01-01

    The programmer's task is often taken to be the construction of algorithms, expressed in hierarchical structures of procedures: this view underlies the majority of traditional programming languages, such as Fortran. A different view is appropriate to a wide class of problem, perhaps including some problems in High Energy Physics. The programmer's task is regarded as having three main stages: first, an explicit model is constructed of the reality with which the program is concerned; second, this model is elaborated to produce the required program outputs; third, the resulting program is transformed to run efficiently in the execution environment. The first two stages deal in network structures of sequential processes; only the third is concerned with procedure hierarchies. (orig.)

  9. IEEE Std 383-1974: IEEE standard for type test of Class IE electric cables, field splices, and connections for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This standard provides direction for establishing type tests which may be used in qualifying Class 1E electric cables, field splices, and other connections for service in nuclear power generating stations. General guidelines for qualifications are given in IEEE Std 323-1974, Standard for Qualifying Class IE Electric Equipment for Nuclear Power Generating Stations. Categories of cables covered are those used for power control and instrumentation services. Though intended primarily to pertain to cable for field installation, this guide may also be used for the qualification of internal wiring of manufactured devices. This guide does not cover cables for service within the reactor vessel

  10. Long-Term Weight Loss Effects of a Behavioral Weight Management Program: Does the Community Food Environment Matter?

    Directory of Open Access Journals (Sweden)

    Shannon N. Zenk

    2018-01-01

    Full Text Available This study examined whether community food environments altered the longer-term effects of a nationwide behavioral weight management program on body mass index (BMI. The sample was comprised of 98,871 male weight management program participants and 15,385 female participants, as well as 461,302 and 37,192 inverse propensity-score weighted matched male and female controls. We measured the community food environment by counting the number of supermarkets, convenience stores, and fast food restaurants within a 1-mile radius around each person’s home address. We used difference-in-difference regression models with person and calendar time fixed effects to estimate MOVE! effects over time in sub-populations defined by community food environment attributes. Among men, after an initial decrease in BMI at 6 months, the effect of the program decreased over time, with BMI increasing incrementally at 12 months (0.098 kg/m2, p < 0.001, 18 months (0.069 kg/m2, p < 0.001, and 24 months (0.067 kg/m2, p < 0.001. Among women, the initial effects of the program decreased over time as well. Women had an incremental BMI change of 0.099 kg/m2 at 12 months (p < 0.05 with non-significant incremental changes at 18 months and 24 months. We found little evidence that these longer-term effects of the weight management program differed depending on the community food environment. Physiological adaptations may overwhelm environmental influences on adherence to behavioral regimens in affecting longer-term weight loss outcomes.

  11. Risk assessment of DOE defense program packages in a beyond 10 CFR 71.73 transportation accident environment

    International Nuclear Information System (INIS)

    Sandquist, G.M.; Bennion, J.S.; Moore, J.E.

    1992-01-01

    A comprehensive program is being conducted by the DOE to determine the risks related to the domestic transportation of radioactive and hazardous materials associated with nuclear weapons. The program is designed to identify, quantify and manage potential risks to public health and safety including potential radiological and toxicological health consequences which may exceed the 10 CFR 71.73 transportation accident environment A major objective of this program being performed by the Lawrence Livermore National Laboratory (LLNL) and the University of Utah is to provide the DOE with the methodology and bases for evaluating highway transportation activities by DOE contractors. This paper describes the approach and the HITRA model which is based upon probabilistic risk assessment (PRA) methodology and route specific data associated with the proposed transportation activity. The model is capable of providing detailed, location and time specific data for assessing projected risks to public health and safety from DOE defense program materials shipments

  12. Environment, safety, health, and quality plan for the TRU- Contaminated Arid Soils Project of the Landfill Stabilization Focus Area Program

    International Nuclear Information System (INIS)

    Watson, L.R.

    1995-06-01

    The Landfill Stabilization Focus Area (LSFA) is a program funded by the US Department of Energy Office of Technology Development. LSFA supports the applied research, development, demonstration, testing, and evaluation of a suite of advanced technologies that together form a comprehensive remediation system for the effective and efficient remediation of buried waste. The TRU-Contaminated Arid Soils project is being conducted under the auspices of the LSFA Program. This document describes the Environment, Safety, Health, and Quality requirements for conducting LSFA/Arid Soils activities at the Idaho National Engineering Laboratory. Topics discussed in this report, as they apply to LSFA/Arid Soils operations, include Federal, State of Idaho, and Environmental Protection Agency regulations, Health and Safety Plans, Quality Program, Data Quality Objectives, and training and job hazard analysis. Finally, a discussion is given on CERCLA criteria and system and performance audits as they apply to the LSFA Program

  13. Environment, safety and health, management and organization compliance assessment, West Valley Demonstration Program, West Valley, New York

    International Nuclear Information System (INIS)

    1989-08-01

    An Environment, Safety and Health ''Tiger Team'' Assessment was conducted at the West Valley Demonstration Project. The Tiger Team was chartered to conduct an onsite, independent assessment of WVDP's environment, safety and health (ES ampersand H) programs to assure compliance with applicable Federal and State laws, regulations, and standards, and Department of Energy Orders. The objective is to provide to the Secretary of Energy the following information: current ES ampersand H compliance status of each facility; specific noncompliance items; ''root causes'' for noncompliance items; evaluation of the adequacy of ES ampersand H organization and resources (DOE and contractor) and needed modifications; and where warranted, recommendations for addressing identified problem areas

  14. End-user programming of ambient narratives for smart retail environments

    NARCIS (Netherlands)

    Doorn, van M.G.L.M.

    2009-01-01

    Ambient Intelligence is a vision on the future of the consumer electronics, telecommunications and computer industry that refers to electronic environments that respond to the presence and activity of people and objects. The goal of these intelligent environments is to support the performance of our

  15. Characterization of the neutron environment for commercial LWR pressure vessel surveillance programs

    International Nuclear Information System (INIS)

    Anderson, S.L.

    1977-01-01

    The application of both analytical and experimental methods to the determination of the neutron environment internal to a typical Westinghouse PWR is presented. The impact of reactor geometry, core spatial power distributions, and reactor operating history on the neutron environment are discussed; and comparisons of analytical predictions with measurements are presented

  16. The Strategic Technologies for Automation and Robotics (STEAR) program: Protection of materials in the space environment subprogram

    Science.gov (United States)

    Schmidt, Lorne R.; Francoeur, J.; Aguero, Alina; Wertheimer, Michael R.; Klemberg-Sapieha, J. E.; Martinu, L.; Blezius, J. W.; Oliver, M.; Singh, A.

    1995-01-01

    Three projects are currently underway for the development of new coatings for the protection of materials in the space environment. These coatings are based on vacuum deposition technologies. The projects will go as far as the proof-of-concept stage when the commercial potential for the technology will be demonstrated on pilot-scale fabrication facilities in 1996. These projects are part of a subprogram to develop supporting technologies for automation and robotics technologies being developed under the Canadian Space Agency's STEAR Program, part of the Canadian Space Station Program.

  17. DEVELOPMENT OF PROGRAM MODULE FOR CALCULATING SPEED OF TITANIC PLASMA SEDIMENTATION IN ENVIRONMENT OF TECHNOLOGICAL GAS

    Directory of Open Access Journals (Sweden)

    S. A. Ivaschenko

    2006-01-01

    Full Text Available The program module has been developed on the basis of package of applied MATLAB programs which allows to calculate speed of coating sedimentation over the section of plasma stream taking into account magnetic field influence of a stabilizing coil, and also to correct the obtained value of sedimentation speed depending on the value of negative accelerating potential, arch current, technological gas pressure. The program resolves visualization of calculation results.

  18. A Widely-Accessible Distributed MEMS Processing Environment. The MEMS Exchange Program

    Science.gov (United States)

    2012-10-29

    all of these patterns in advance, we made a new cost model, called the Python Code cost model, which utilizes the power of a high level programming ...document entitled “The Beginners Guide to MEMS Processing” on the MEMSNet and MEMS Exchange The MEMS Exchange Program Final Technical Report October 29...from the Government is absolutely necessary. As said The MEMS Exchange Program Final Technical Report October 29, 2012 Page 57 of 58 before

  19. Toward creating family-friendly work environments in pediatrics: baseline data from pediatric department chairs and pediatric program directors.

    Science.gov (United States)

    McPhillips, Heather A; Burke, Ann E; Sheppard, Kate; Pallant, Adam; Stapleton, F Bruder; Stanton, Bonita

    2007-03-01

    The objective was to determine baseline characteristics of pediatric residency training programs and academic departments in regard to family-friendly work environments as outlined in the Report of the Task Force on Women in Pediatrics. We conducted Web-based anonymous surveys of 147 pediatric department chairs and 203 pediatric program directors. The chair's questionnaire asked about child care, lactation facilities, family leave policies, work-life balance, and tenure and promotion policies. The program director's questionnaire asked about family leave, parenting, work-life balance, and perceptions of "family-friendliness." The response rate was 52% for program directors and 51% for chairs. Nearly 60% of chairs reported some access to child care or provided assistance locating child care; however, in half of these departments, demand almost always exceeded supply. Lactation facilities were available to breastfeeding faculty in 74% of departments, although only 57% provided access to breast pumps. A total of 78% of chairs and 90% of program directors reported written maternity leave policies with slightly fewer reporting paternity leave policies. The majority (83%) of chairs reported availability of part-time employment, whereas only 27% of program directors offered part-time residency options. Most departments offered some flexibility in promotion and tenure. Although progress has been made, change still is needed in many areas in pediatric departments and training programs, including better accessibility to quality child care; improved lactation facilities for breastfeeding mothers; clear, written parental leave policies; and flexible work schedules to accommodate changing demands of family life.

  20. Performance Analysis of the IEEE 802.11p Multichannel MAC Protocol in Vehicular Ad Hoc Networks.

    Science.gov (United States)

    Song, Caixia

    2017-12-12

    Vehicular Ad Hoc Networks (VANETs) employ multichannel to provide a variety of safety and non-safety applications, based on the IEEE 802.11p and IEEE 1609.4 protocols. The safety applications require timely and reliable transmissions, while the non-safety applications require efficient and high throughput. In the IEEE 1609.4 protocol, operating interval is divided into alternating Control Channel (CCH) interval and Service Channel (SCH) interval with an identical length. During the CCH interval, nodes transmit safety-related messages and control messages, and Enhanced Distributed Channel Access (EDCA) mechanism is employed to allow four Access Categories (ACs) within a station with different priorities according to their criticality for the vehicle's safety. During the SCH interval, the non-safety massages are transmitted. An analytical model is proposed in this paper to evaluate performance, reliability and efficiency of the IEEE 802.11p and IEEE 1609.4 protocols. The proposed model improves the existing work by taking serval aspects and the character of multichannel switching into design consideration. Extensive performance evaluations based on analysis and simulation help to validate the accuracy of the proposed model and analyze the capabilities and limitations of the IEEE 802.11p and IEEE 1609.4 protocols, and enhancement suggestions are given.

  1. Patterns of individual change in a parenting program for child maltreatment and their relation to family and professional environments.

    Science.gov (United States)

    Byrne, S; Rodrigo, M J; Máiquez, M L

    2014-03-01

    In the area of child maltreatment prevention, little is known about the typology of changes that individuals undergo in response to parent-training interventions. In this study, we examined the patterns of change observed in parents immediately after their completion of the Apoyo Personal y Familiar (APF, Personal and Family Support) parenting program. We identified five clusters and classified 496 parents according to two criteria: (a) the amount of pre-post changes (total or partial) as reflected in their self-reports on implicit theories, parental agency and childrearing practices, and (b) the positive, negative or mixed character of these changes. The study also included a follow-up of a subset of 95 participants intended to examine the extent to which the patterns of change identified in the first part of the study might predict the quality of the childrearing environment at home and the successful integration of the APF program into social services structures one year on. In this follow-up study, external evaluators observed families' home environments and collected the parenting program facilitators' self-reports on changes to their work environment. The evaluators found higher-quality childrearing environments and more positive appraisals of the changes to the teams' work with families in those cases where participants had experienced partial or total positive changes as a result of the APF. This approach offers insights into processes of individual change that have practical implications for the successful implementation of parenting programs in child maltreatment prevention services. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. An Improved Approach for RSSI-Based only Calibration-Free Real-Time Indoor Localization on IEEE 802.11 and 802.15.4 Wireless Networks

    Directory of Open Access Journals (Sweden)

    Marco Passafiume

    2017-03-01

    Full Text Available Assuming a reliable and responsive spatial contextualization service is a must-have in IEEE 802.11 and 802.15.4 wireless networks, a suitable approach consists of the implementation of localization capabilities, as an additional application layer to the communication protocol stack. Considering the applicative scenario where satellite-based positioning applications are denied, such as indoor environments, and excluding data packet arrivals time measurements due to lack of time resolution, received signal strength indicator (RSSI measurements, obtained according to IEEE 802.11 and 802.15.4 data access technologies, are the unique data sources suitable for indoor geo-referencing using COTS devices. In the existing literature, many RSSI based localization systems are introduced and experimentally validated, nevertheless they require periodic calibrations and significant information fusion from different sensors that dramatically decrease overall systems reliability and their effective availability. This motivates the work presented in this paper, which introduces an approach for an RSSI-based calibration-free and real-time indoor localization. While switched-beam array-based hardware (compliant with IEEE 802.15.4 router functionality has already been presented by the author, the focus of this paper is the creation of an algorithmic layer for use with the pre-existing hardware capable to enable full localization and data contextualization over a standard 802.15.4 wireless sensor network using only RSSI information without the need of lengthy offline calibration phase. System validation reports the localization results in a typical indoor site, where the system has shown high accuracy, leading to a sub-metrical overall mean error and an almost 100% site coverage within 1 m localization error.

  3. An Improved Approach for RSSI-Based only Calibration-Free Real-Time Indoor Localization on IEEE 802.11 and 802.15.4 Wireless Networks.

    Science.gov (United States)

    Passafiume, Marco; Maddio, Stefano; Cidronali, Alessandro

    2017-03-29

    Assuming a reliable and responsive spatial contextualization service is a must-have in IEEE 802.11 and 802.15.4 wireless networks, a suitable approach consists of the implementation of localization capabilities, as an additional application layer to the communication protocol stack. Considering the applicative scenario where satellite-based positioning applications are denied, such as indoor environments, and excluding data packet arrivals time measurements due to lack of time resolution, received signal strength indicator (RSSI) measurements, obtained according to IEEE 802.11 and 802.15.4 data access technologies, are the unique data sources suitable for indoor geo-referencing using COTS devices. In the existing literature, many RSSI based localization systems are introduced and experimentally validated, nevertheless they require periodic calibrations and significant information fusion from different sensors that dramatically decrease overall systems reliability and their effective availability. This motivates the work presented in this paper, which introduces an approach for an RSSI-based calibration-free and real-time indoor localization. While switched-beam array-based hardware (compliant with IEEE 802.15.4 router functionality) has already been presented by the author, the focus of this paper is the creation of an algorithmic layer for use with the pre-existing hardware capable to enable full localization and data contextualization over a standard 802.15.4 wireless sensor network using only RSSI information without the need of lengthy offline calibration phase. System validation reports the localization results in a typical indoor site, where the system has shown high accuracy, leading to a sub-metrical overall mean error and an almost 100% site coverage within 1 m localization error.

  4. Static and Dynamic 4-Way Handshake Solutions to Avoid Denial of Service Attack in Wi-Fi Protected Access and IEEE 802.11i

    Directory of Open Access Journals (Sweden)

    De Rango Floriano

    2006-01-01

    Full Text Available This paper focuses on WPA and IEEE 802.11i protocols that represent two important solutions in the wireless environment. Scenarios where it is possible to produce a DoS attack and DoS flooding attacks are outlined. The last phase of the authentication process, represented by the 4-way handshake procedure, is shown to be unsafe from DoS attack. This can produce the undesired effect of memory exhaustion if a flooding DoS attack is conducted. In order to avoid DoS attack without increasing the complexity of wireless mobile devices too much and without changing through some further control fields of the frame structure of wireless security protocols, a solution is found and an extension of WPA and IEEE 802.11 is proposed. A protocol extension with three "static" variants and with a resource-aware dynamic approach is considered. The three enhancements to the standard protocols are achieved through some simple changes on the client side and they are robust against DoS and DoS flooding attack. Advantages introduced by the proposal are validated by simulation campaigns and simulation parameters such as attempted attacks, successful attacks, and CPU load, while the algorithm execution time is evaluated. Simulation results show how the three static solutions avoid memory exhaustion and present a good performance in terms of CPU load and execution time in comparison with the standard WPA and IEEE 802.11i protocols. However, if the mobile device presents different resource availability in terms of CPU and memory or if resource availability significantly changes in time, a dynamic approach that is able to switch among three different modalities could be more suitable.

  5. Indoor Air Quality Tools for Schools Program: Benefits of Improving Air Quality in the School Environment.

    Science.gov (United States)

    Environmental Protection Agency, Washington, DC. Office of Radiation and Indoor Air.

    The U.S. Environmental Protection Agency (EPA) developed the Indoor Air Quality Tools for Schools (IAQ TfS) Program to help schools prevent, identify, and resolve their IAQ problems. This publication describes the program and its advantages, explaining that through simple, low-cost measures, schools can: reduce IAQ-related health risks and…

  6. Primary School Pupils' Attitudes toward Learning Programming through Visual Interactive Environments

    Science.gov (United States)

    Asad, Khaled; Tibi, Moanis; Raiyn, Jamal

    2016-01-01

    New generations are using and playing with mobile and computer applications extensively. These applications are the outcomes of programming work that involves skills, such as computational and algorithmic thinking. Learning programming is not easy for students children. In recent years, academic institutions like the Massachusetts Institute of…

  7. Pyro: A Python-Based Versatile Programming Environment for Teaching Robotics

    Science.gov (United States)

    Blank, Douglas; Kumar, Deepak; Meeden, Lisa; Yanco, Holly

    2004-01-01

    In this article we describe a programming framework called Pyro, which provides a set of abstractions that allows students to write platform-independent robot programs. This project is unique because of its focus on the pedagogical implications of teaching mobile robotics via a top-down approach. We describe the background of the project, its…

  8. Environmental qualification program for Krsko NPP

    International Nuclear Information System (INIS)

    Cerjak, J.; Klenovsek, P.; Pavsek, J.; Freeland, K.R.; Spalj, S.

    1998-01-01

    NEK plant components, including those critical to safe plant operation, deteriorate and wear over service life due to the effects of aging and harsh environmental conditions. Since the plant environment is a source of common-cause failures, an Environmental Qualification (EQ) program is required to ensure and demonstrate the ability of safety-related equipment to perform its design safety function during a design-basis (DBE), even after aging over its service life in the plant. EQ is a requirement for plants licensed by the US NRC, in accordance with 10 CFR 50.49, Regulatory Guide 1.89, NUREG-0588, and IEEE-323. This paper presents the current EQ Program status at Krsko NPP.(author)

  9. Hybrid Polling Method for Direct Link Communication for IEEE 802.11 Wireless LANs

    Directory of Open Access Journals (Sweden)

    Woo-Yong Choi

    2008-10-01

    Full Text Available The direct link communication between STAtions (STAs is one of the techniques to improve the MAC performance of IEEE 802.11 infrastructure networks. For the efficient direct link communication, in the literature, the simultaneous polling method was proposed to allow the multiple direct data communication to be performed simultaneously. However, the efficiency of the simultaneous polling method is affected by the interference condition. To alleviate the problem of the lower polling efficiency with the larger interference range, the hybrid polling method is proposed for the direct link communication between STAs in IEEE 802.11 infrastructure networks. By the proposed polling method, we can integrate the sequential and simultaneous polling methods properly according to the interference condition. Numerical examples are also presented to show the medium access control (MAC performance improvement by the proposed polling method.

  10. 2011 IEEE Visualization Contest Winner: Visualizing Unsteady Vortical Behavior of a Centrifugal Pump

    KAUST Repository

    Otto, Mathias

    2012-09-01

    In the 2011 IEEE Visualization Contest, the dataset represented a high-resolution simulation of a centrifugal pump operating below optimal speed. The goal was to find suitable visualization techniques to identify regions of rotating stall that impede the pump\\'s effectiveness. The winning entry split analysis of the pump into three parts based on the pump\\'s functional behavior. It then applied local and integration-based methods to communicate the unsteady flow behavior in different regions of the dataset. This research formed the basis for a comparison of common vortex extractors and more recent methods. In particular, integration-based methods (separation measures, accumulated scalar fields, particle path lines, and advection textures) are well suited to capture the complex time-dependent flow behavior. This video (http://youtu.be/ oD7QuabY0oU) shows simulations of unsteady flow in a centrifugal pump. © 2012 IEEE.

  11. The Exploration of Network Coding in IEEE 802.15.4 Networks

    Directory of Open Access Journals (Sweden)

    Deze Zeng

    2011-01-01

    communication protocol should be energy efficient. The IEEE 802.15.4 is designed as a standard protocol for low power, low data rate, low complexity, and short range connections in WPANs. The standard supports allocating several numbers of collision-free guarantee time slots (GTSs within a superframe for some time-critical transmissions. Recently, COPE was proposed as a promising network coding architecture to essentially improve the throughput of wireless networks. In this paper, we exploit the network coding technique at coordinators to improve energy efficiency of the WPAN. Some related practical issues, such as GTS allocation and multicast, are also discussed in order to exploit the network coding opportunities efficiently. Since the coding opportunities are mostly exploited, our proposal achieves both higher energy efficiency and throughput performance than the original IEEE 802.15.4.

  12. The IEEE 1355 Standard. Developments, performance and application in high energy physics

    International Nuclear Information System (INIS)

    Haas, S.

    1998-12-01

    The data acquisition systems of the next generation High Energy Physics experiments at the Large Hadron Collider (LHC) at CERN will rely on high-speed point-to-point links and switching networks for their higher level trigger and event building systems. This thesis provides a detailed evaluation of the DS-Link and switch technology, which is based on the IEEE 1355 standard for Heterogeneous Interconnect (HIC). The DS-Link is a bidirectional point-to-point serial interconnect, operating at speeds up to 200 MBaud. The objective of this thesis was to study the performance of the IEEE 1355 link and switch technology and to demonstrate that switching networks using this technology would scale to meet the requirements of the High Energy Physics applications

  13. Design Optimization of Cyber-Physical Distributed Systems using IEEE Time-sensitive Networks (TSN)

    DEFF Research Database (Denmark)

    Pop, Paul; Lander Raagaard, Michael; Craciunas, Silviu S.

    2016-01-01

    to the optimization of distributed cyber-physical systems using real-time Ethernet for communication. Then, we formulate two novel optimization problems related to the scheduling and routing of TT and AVB traffic in TSN. Thus, we consider that we know the topology of the network as well as the set of TT and AVB flows......In this paper we are interested in safety-critical real-time applications implemented on distributed architectures supporting the Time-SensitiveNetworking (TSN) standard. The ongoing standardization of TSN is an IEEE effort to bring deterministic real-time capabilities into the IEEE 802.1 Ethernet...... standard supporting safety-critical systems and guaranteed Quality-of-Service. TSN will support Time-Triggered (TT) communication based on schedule tables, Audio-Video-Bridging (AVB) flows with bounded end-to-end latency as well as Best-Effort messages. We first present a survey of research related...

  14. Transient Stability Improvement of IEEE 9 Bus System Using Power World Simulator

    Directory of Open Access Journals (Sweden)

    Kaur Ramandeep

    2016-01-01

    Full Text Available The improvement of transient stability of power system was one of the most challenging research areas in power engineer.The main aim of this paper was transient stability analysis and improvement of IEEE 9 bus system. These studies were computed using POWER WORLD SIMULATOR. The IEEE 9 bus system was modelled in power world simulator and load flow studies were performed to determine pre-fault conditions in the system using Newton-Raphson method. The transient stability analysis was carried out using Runga method during three-phase balanced fault. For the improvement transient stability, the general methods adopted were fast acting exciters, FACT devices and addition of parallel transmission line. These techniques play an important role in improving the transient stability, increasing transmission capacity and damping low frequency oscillations.

  15. A note on bound constraints handling for the IEEE CEC'05 benchmark function suite.

    Science.gov (United States)

    Liao, Tianjun; Molina, Daniel; de Oca, Marco A Montes; Stützle, Thomas

    2014-01-01

    The benchmark functions and some of the algorithms proposed for the special session on real parameter optimization of the 2005 IEEE Congress on Evolutionary Computation (CEC'05) have played and still play an important role in the assessment of the state of the art in continuous optimization. In this article, we show that if bound constraints are not enforced for the final reported solutions, state-of-the-art algorithms produce infeasible best candidate solutions for the majority of functions of the IEEE CEC'05 benchmark function suite. This occurs even though the optima of the CEC'05 functions are within the specified bounds. This phenomenon has important implications on algorithm comparisons, and therefore on algorithm designs. This article's goal is to draw the attention of the community to the fact that some authors might have drawn wrong conclusions from experiments using the CEC'05 problems.

  16. A Novel IEEE 802.15.4e DSME MAC for Wireless Sensor Networks.

    Science.gov (United States)

    Sahoo, Prasan Kumar; Pattanaik, Sudhir Ranjan; Wu, Shih-Lin

    2017-01-16

    IEEE 802.15.4e standard proposes Deterministic and Synchronous Multichannel Extension (DSME) mode for wireless sensor networks (WSNs) to support industrial, commercial and health care applications. In this paper, a new channel access scheme and beacon scheduling schemes are designed for the IEEE 802.15.4e enabled WSNs in star topology to reduce the network discovery time and energy consumption. In addition, a new dynamic guaranteed retransmission slot allocation scheme is designed for devices with the failure Guaranteed Time Slot (GTS) transmission to reduce the retransmission delay. To evaluate our schemes, analytical models are designed to analyze the performance of WSNs in terms of reliability, delay, throughput and energy consumption. Our schemes are validated with simulation and analytical results and are observed that simulation results well match with the analytical one. The evaluated results of our designed schemes can improve the reliability, throughput, delay, and energy consumptions significantly.

  17. A Fast MAC-Layer Handover for an IEEE 802.16e-Based WMAN

    Science.gov (United States)

    Ray, Sayan K.; Pawlikowski, Krzysztof; Sirisena, Harsha

    We propose a modification of the IEEE 802.16e hard handover (HHO) procedure, which significantly reduces the handover latency constraint of the original HHO procedure in IEEE 802.16e networks. It allows a better handling of the delay-sensitive traffic by avoiding unnecessary time-consuming scanning and synchronization activity as well as simplifies the network re-entry procedure. With the help of the backhaul network, it reduces the number of control messages in the original handover policy, making the handover latency acceptable also for real-time streaming traffic. Preliminary performance evaluation studies show that the modified handover procedure is able to reduce the total handover latency by about 50%.

  18. A network architecture for precision formation flying using the IEEE 802.11 MAC Protocol

    Science.gov (United States)

    Clare, Loren P.; Gao, Jay L.; Jennings, Esther H.; Okino, Clayton

    2005-01-01

    Precision Formation Flying missions involve the tracking and maintenance of spacecraft in a desired geometric formation. The strong coupling of spacecraft in formation flying control requires inter-spacecraft communication to exchange information. In this paper, we present a network architecture that supports PFF control, from the initial random deployment phase to the final formation. We show that a suitable MAC layer for the application protocol is IEEE's 802.11 MAC protocol. IEEE 802.11 MAC has two modes of operations: DCF and PCF. We show that DCF is suitable for the initial deployment phase while switching to PCF when the spacecraft are in formation improves jitter and throughput. We also consider the effect of routing on protocol performance and suggest when it is profitable to turn off route discovery to achieve better network performance.

  19. Capacity Evaluation for IEEE 802.16e Mobile WiMAX

    Directory of Open Access Journals (Sweden)

    Chakchai So-In

    2010-01-01

    Full Text Available We present a simple analytical method for capacity evaluation of IEEE 802.16e Mobile WiMAX networks. Various overheads that impact the capacity are explained and methods to reduce these overheads are also presented. The advantage of a simple model is that the effect of each decision and sensitivity to various parameters can be seen easily. We illustrate the model by estimating the capacity for three sample applications—Mobile TV, VoIP, and data. The analysis process helps explain various features of IEEE 802.16e Mobile WiMAX. It is shown that proper use of overhead reducing mechanisms and proper scheduling can make an order of magnitude difference in performance. This capacity evaluation method can also be used for validation of simulation models.

  20. Contributions to the 14th IEEE/NPSS Symposium on fusion engineering

    International Nuclear Information System (INIS)

    Navarro, A.P.; Almoguera, L.; Alonso Gozalo, J.; Alonso Candenas, J.; Blaumoser, M.

    1992-01-01

    Three communications about the TJ-II device, under construction at CIEMAT with preferential support from EURATOM, were presented to the 14th IEEE/NPSS Symposium on Fusion Engineering and are collected in this report. The first one describes in detail the device and its present status of design and construction. The remaining two deal with the two most critical components of the project: the vacuum vessel and the central hard conductor. (author) 16 fig. 16 ref

  1. Utilizing reliability concepts in the development of IEEE recommended good practices for nuclear plant maintenance

    International Nuclear Information System (INIS)

    Gradin, L.P.

    1986-01-01

    This paper presents information describing the concern for nuclear power plant electrical equipment maintenance and the IEEE Nuclear Power Engineering Committee's method to address that concern. That method includes the creation of Working Group 3.3, ''Maintenance Good Practices'' which is developing specific maintenance good practice documents, supporting technical information exchange, and providing a vehicle to promote practices which can reduce cost and enhance plant safety. The foundation for that effort is the utilization of Reliability concepts

  2. Practical support for Lean Six Sigma software process definition using IEEE software engineering standards

    CERN Document Server

    Land, Susan K; Walz, John W

    2012-01-01

    Practical Support for Lean Six Sigma Software Process Definition: Using IEEE Software Engineering Standards addresses the task of meeting the specific documentation requirements in support of Lean Six Sigma. This book provides a set of templates supporting the documentation required for basic software project control and management and covers the integration of these templates for their entire product development life cycle. Find detailed documentation guidance in the form of organizational policy descriptions, integrated set of deployable document templates, artifacts required in suppo

  3. [Mobile Health: IEEE Standard for Wearable Cuffless Blood Pressure Measuring Devices].

    Science.gov (United States)

    Zhou, Xia; Wu, Wenli; Bao, Shudi

    2015-07-01

    IEEE Std 1708-2014 breaks through the traditional standards of cuff based blood pressure measuring devices and establishes a normative definition of wearable cuffless blood pressure measuring devices and the objective performance evaluation of this kind of devices. This study firstly introduces the background of the new standard. Then, the standard details will be described, and the impact of cuffless blood pressure measuring devices with the new standard on manufacturers and end users will be addressed.

  4. IEEE guide for general principles of reliability analysis of nuclear power generating station protection systems

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    Presented is the Institute of Electrical and Electronics Engineers, Inc. (IEEE) guide for general principles of reliability analysis of nuclear power generating station protection systems. The document has been prepared to provide the basic principles needed to conduct a reliability analysis of protection systems. Included is information on qualitative and quantitative analysis, guides for failure data acquisition and use, and guide for establishment of intervals

  5. IEEE standard for qualifying class IE equipment for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1974-01-01

    The Institute of Electrical and Electrical Engineers, Inc. (IEEE) standards for electrical equipment (Class IE) for nuclear power generating stations are given. The standards are to provide guidance for demonstrating and documenting the adequacy of electric equipment used in all Class IE and interface systems. Representative in containment design basis event conditions for the principal reactor types are included in the appendixes for guidance in enviromental simulation

  6. A new DoD initiative: the Computational Research and Engineering Acquisition Tools and Environments (CREATE) program

    International Nuclear Information System (INIS)

    Arevalo, S; Atwood, C; Bell, P; Blacker, T D; Dey, S; Fisher, D; Fisher, D A; Genalis, P; Gorski, J; Harris, A; Hill, K; Hurwitz, M; Kendall, R P; Meakin, R L; Morton, S; Moyer, E T; Post, D E; Strawn, R; Veldhuizen, D v; Votta, L G

    2008-01-01

    In FY2008, the U.S. Department of Defense (DoD) initiated the Computational Research and Engineering Acquisition Tools and Environments (CREATE) program, a $360M program with a two-year planning phase and a ten-year execution phase. CREATE will develop and deploy three computational engineering tool sets for DoD acquisition programs to use to design aircraft, ships and radio-frequency antennas. The planning and execution of CREATE are based on the 'lessons learned' from case studies of large-scale computational science and engineering projects. The case studies stress the importance of a stable, close-knit development team; a focus on customer needs and requirements; verification and validation; flexible and agile planning, management, and development processes; risk management; realistic schedules and resource levels; balanced short- and long-term goals and deliverables; and stable, long-term support by the program sponsor. Since it began in FY2008, the CREATE program has built a team and project structure, developed requirements and begun validating them, identified candidate products, established initial connections with the acquisition programs, begun detailed project planning and development, and generated the initial collaboration infrastructure necessary for success by its multi-institutional, multidisciplinary teams

  7. Ignalina Nuclear Power Plant and the Environment. Scientific research program: 1993-1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The aim of the research program is not only to asses the impact of the Ignalina NPP to the ecosystems. There was a need to study the region of Ignalina NPP as a comprehensive nature complex, not limited by the interests or potential of one institution. The implementation of such program could provide scientific conclusions vital for formulating the strategies of nature and health protection under the conditions of normal and emergency operational regimes of Ignalina NPP. The program will be carried out by 250 members of 13 research and academic institutions and will continue from 1993 till 1997. (author). 13 refs., 13 figs.

  8. Ignalina Nuclear Power Plant and the Environment. Scientific research program: 1993-1997

    International Nuclear Information System (INIS)

    1993-01-01

    The aim of the research program is not only to asses the impact of the Ignalina NPP to the ecosystems. There was a need to study the region of Ignalina NPP as a comprehensive nature complex, not limited by the interests or potential of one institution. The implementation of such program could provide scientific conclusions vital for formulating the strategies of nature and health protection under the conditions of normal and emergency operational regimes of Ignalina NPP. The program will be carried out by 250 members of 13 research and academic institutions and will continue from 1993 till 1997. (author). 13 refs., 13 figs

  9. Energy market environments in Europe and the United States

    International Nuclear Information System (INIS)

    Puettgen, H.B.; Haubrich, H.J.; Stotz, J.; Winje, D.; Klappa, G.; Denton, D.H.

    1997-01-01

    On July 21, the technical program of the IEEE Power Engineering Society (PES) 1997 Summer Meeting began with a joint plenary, cosponsored by VDE-ETG. Simultaneous translation allowed the audience to listen to the presentations in either German or English. Emerging Energy Market Environments in Europe and the United states was chaired by H.J. Haubrich, RWTH, and H.B. Puettgen, Georgia Institute of Technology. Following welcome addresses and introductory remarks by E.F. Peschke, chair or the local organizing committee, K. Bechtold, BEWAG, Berlin, H. Wolters, VDE chair, L. Bochanky, ETG chair, Charles K. Alexander, IEEE president, and Robert A. Dent, PES president, the following presentations were given: The Process of Integration of the East and West European Networks, Juergen Stotz, VEAG, Germany; Electric Power Turns into a Commodity: A Change of Paradigm in the Power Industry, Dietmar Winje, BEWAG, Germany; The Brave New World of Customer Satisfaction, Gale Klappa, Southwest Utilities, United Kingdom; Deregulation Risks and Opportunities, Donald H. Denton, Jr., Duke Power Company, United States. Summaries of the four presentations are included

  10. Predictors of Behavior and Performance in Extreme Environments: The Antarctic Space Analogue Program

    Science.gov (United States)

    Palinkas, Lawrence A.; Gunderson, E K. Eric; Holland, A. W.; Miller, Christopher; Johnson, Jeffrey C.

    2000-01-01

    To determine which, if any, characteristics should be incorporated into a select-in approach to screening personnel for long-duration spaceflight, we examined the influence of crewmember social/ demographic characteristics, personality traits, interpersonal needs, and characteristics of station physical environments on performance measures in 657 American men who spent an austral winter in Antarctica between 1963 and 1974. During screening, subjects completed a Personal History Questionnaire which obtained information on social and demographic characteristics, the Deep Freeze Opinion Survey which assessed 5 different personality traits, and the Fundamental Interpersonal Relations Orientation-Behavior (FIRO-B) Scale which measured 6 dimensions of interpersonal needs. Station environment included measures of crew size and severity of physical environment. Performance was assessed on the basis of combined peer-supervisor evaluations of overall performance, peer nominations of fellow crewmembers who made ideal winter-over candidates, and self-reported depressive symptoms. Social/demographic characteristics, personality traits, interpersonal needs, and characteristics of station environments collectively accounted for 9-17% of the variance in performance measures. The following characteristics were significant independent predictors of more than one performance measure: military service, low levels of neuroticism, extraversion and conscientiousness, and a low desire for affection from others. These results represent an important first step in the development of select-in criteria for personnel on long-duration missions in space and other extreme environments. These criteria must take into consideration the characteristics of the environment and the limitations they place on meeting needs for interpersonal relations and task performance, as well as the characteristics of the individuals and groups who live and work in these environments.

  11. An improved IEEE 802.11 protocol for reliable data transmission in power distribution fault diagnosis

    Energy Technology Data Exchange (ETDEWEB)

    Campoccia, F.; Di Silvestre, M.L.; Sanseverino, E.R.; Zizzo, G. [Palermo Univ., Palermo (Italy)

    2010-10-15

    In power systems, on-line transmission between local units and the central unit can be done by means of power line communications or wireless technology. During an electrical fault, the reliability of the distribution system depends on the security of the timely protective and restorative actions on the network. This paper focused on the WiFi system because of its economy and ease of installation. However, WiFi systems are typically managed by the IEEE 802.11 protocol, which is not reliable in terms of security in data communication. In WiFi networks, data is divided into packets and sent in succession to reduce errors within the radio channel. The IEEE 802.11 protocol has high probability for loss of packets or delay in their transmission. In order to ensure the reliability of data transmission times between two terminal units connected by WiFi stations, a new protocol was derived by modifying the IEEE 802.11. The improvements of the new protocol were highlighted and its capability for the diagnostic service was verified. The modified protocol eliminates the danger of collisions between packets and optimizes the transmission time for sending information. 6 refs., 7 tabs., 8 figs.

  12. FPGA implementation cost and performance evaluation of IEEE 802.11 protocol encryption security schemes

    Science.gov (United States)

    Sklavos, N.; Selimis, G.; Koufopavlou, O.

    2005-01-01

    The explosive growth of internet and consumer demand for mobility has fuelled the exponential growth of wireless communications and networks. Mobile users want access to services and information, from both internet and personal devices, from a range of locations without the use of a cable medium. IEEE 802.11 is one of the most widely used wireless standards of our days. The amount of access and mobility into wireless networks requires a security infrastructure that protects communication within that network. The security of this protocol is based on the wired equivalent privacy (WEP) scheme. Currently, all the IEEE 802.11 market products support WEP. But recently, the 802.11i working group introduced the advanced encryption standard (AES), as the security scheme for the future IEEE 802.11 applications. In this paper, the hardware integrations of WEP and AES are studied. A field programmable gate array (FPGA) device has been used as the hardware implementation platform, for a fair comparison between the two security schemes. Measurements for the FPGA implementation cost, operating frequency, power consumption and performance are given.

  13. Performance Evaluation of Beacon-Enabled Mode for IEEE 802.15.4 Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    M. Udin Harun Al Rasyid

    2013-12-01

    Full Text Available IEEE 802.15.5 standard support structure of star and peer-to-peer network formation. Strating from these, the cluster tree network can be built as a special case of peer-to-peer network to increse coverage area. In this paper, we provide an performance evaluation of beacon- enabled mode for IEEE 802.15.4 wireless sensor network on star and cluster topology in order to get the maximum result to apply the appropriate topology model as needed. We conduct analysis on each topology model by using the numbers of nodes from 10 nodes to 100 nodes to analyze throughput, delay, energy consumption, and probability success packet by using NS2 simulator. The simulation results show that the throughput and the probability of success packet of cluster topology are higher than that of star topology, and the energy consumption of cluster topology is lesser than that of star topology. However, cluster topology increases the delay more than star topology. Keywords: IEEE 802.15.4, wireless sensor network, beacon-enabled mode, topology, csma/ca

  14. IEEE P1596, a scalable coherent interface for GigaByte/sec multiprocessor applications

    International Nuclear Information System (INIS)

    Gustavson, D.B.

    1988-11-01

    IEEE P1596, the Scalable Coherent Interface (formerly known as SuperBus) is based on experience gained during the development of Fastbus (IEEE 960), Futurebus (IEEE 896.1) and other modern 32-bit buses. SCI goals include a minimum bandwidth of 1 GByte/sec per processor; efficient support of a coherent distributed-cache image of shared memory; and support for segmentation, bus repeaters and general switched interconnections like Banyan, Omega, or full crossbar networks. To achieve these ambitious goals, SCI must sacrifice the immediate handshake characteristic of the present generation of buses in favor of a packet-like split-cycle protocol. Wire-ORs, broadcasts, and even ordinary passive bus structures are to be avoided. However, a lower performance (1 GByte/sec per backplane instead of per processor) implementation using a register insertion ring architecture on a passive ''backplane'' appears to be possible using the same interface as for the more costly switch networks. This paper presents a summary of current directions, and reports the status of the work in progress

  15. Study on Additional Carrier Sensing for IEEE 802.15.4 Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Bih-Hwang Lee

    2010-06-01

    Full Text Available Wireless sensor networks based on the IEEE 802.15.4 standard are able to achieve low-power transmissions in the guise of low-rate and short-distance wireless personal area networks (WPANs. The slotted carrier sense multiple access with collision avoidance (CSMA/CA is used for contention mechanism. Sensor nodes perform a backoff process as soon as the clear channel assessment (CCA detects a busy channel. In doing so they may neglect the implicit information of the failed CCA detection and further cause the redundant sensing. The blind backoff process in the slotted CSMA/CA will cause lower channel utilization. This paper proposes an additional carrier sensing (ACS algorithm based on IEEE 802.15.4 to enhance the carrier sensing mechanism for the original slotted CSMA/CA. An analytical Markov chain model is developed to evaluate the performance of the ACS algorithm. Both analytical and simulation results show that the proposed algorithm performs better than IEEE 802.15.4, which in turn significantly improves throughput, average medium access control (MAC delay and power consumption of CCA detection.

  16. FPGA implementation cost and performance evaluation of IEEE 802.11 protocol encryption security schemes

    International Nuclear Information System (INIS)

    Sklavos, N; Selimis, G; Koufopavlou, O

    2005-01-01

    The explosive growth of internet and consumer demand for mobility has fuelled the exponential growth of wireless communications and networks. Mobile users want access to services and information, from both internet and personal devices, from a range of locations without the use of a cable medium. IEEE 802.11 is one of the most widely used wireless standards of our days. The amount of access and mobility into wireless networks requires a security infrastructure that protects communication within that network. The security of this protocol is based on the wired equivalent privacy (WEP) scheme. Currently, all the IEEE 802.11 market products support WEP. But recently, the 802.11i working group introduced the advanced encryption standard (AES), as the security scheme for the future IEEE 802.11 applications. In this paper, the hardware integrations of WEP and AES are studied. A field programmable gate array (FPGA) device has been used as the hardware implementation platform, for a fair comparison between the two security schemes. Measurements for the FPGA implementation cost, operating frequency, power consumption and performance are given

  17. Strategies for Optimal MAC Parameters Tuning in IEEE 802.15.6 Wearable Wireless Sensor Networks.

    Science.gov (United States)

    Alam, Muhammad Mahtab; Ben Hamida, Elyes

    2015-09-01

    Wireless body area networks (WBAN) has penetrated immensely in revolutionizing the classical heath-care system. Recently, number of WBAN applications has emerged which introduce potential limits to existing solutions. In particular, IEEE 802.15.6 standard has provided great flexibility, provisions and capabilities to deal emerging applications. In this paper, we investigate the application-specific throughput analysis by fine-tuning the physical (PHY) and medium access control (MAC) parameters of the IEEE 802.15.6 standard. Based on PHY characterizations in narrow band, at the MAC layer, carrier sense multiple access collision avoidance (CSMA/CA) and scheduled access protocols are extensively analyzed. It is concluded that, IEEE 802.15.6 standard can satisfy most of the WBANs applications throughput requirements by maximum achieving 680 Kbps. However, those emerging applications which require high quality audio or video transmissions, standard is not able to meet their constraints. Moreover, delay, energy efficiency and successful packet reception are considered as key performance metrics for comparing the MAC protocols. CSMA/CA protocol provides the best results to meet the delay constraints of medical and non-medical WBAN applications. Whereas, the scheduled access approach, performs very well both in energy efficiency and packet reception ratio.

  18. Study on additional carrier sensing for IEEE 802.15.4 wireless sensor networks.

    Science.gov (United States)

    Lee, Bih-Hwang; Lai, Ruei-Lung; Wu, Huai-Kuei; Wong, Chi-Ming

    2010-01-01

    Wireless sensor networks based on the IEEE 802.15.4 standard are able to achieve low-power transmissions in the guise of low-rate and short-distance wireless personal area networks (WPANs). The slotted carrier sense multiple access with collision avoidance (CSMA/CA) is used for contention mechanism. Sensor nodes perform a backoff process as soon as the clear channel assessment (CCA) detects a busy channel. In doing so they may neglect the implicit information of the failed CCA detection and further cause the redundant sensing. The blind backoff process in the slotted CSMA/CA will cause lower channel utilization. This paper proposes an additional carrier sensing (ACS) algorithm based on IEEE 802.15.4 to enhance the carrier sensing mechanism for the original slotted CSMA/CA. An analytical Markov chain model is developed to evaluate the performance of the ACS algorithm. Both analytical and simulation results show that the proposed algorithm performs better than IEEE 802.15.4, which in turn significantly improves throughput, average medium access control (MAC) delay and power consumption of CCA detection.

  19. On IEEE 802.15.6 IR-UWB receivers - simulations for DBPSK modulation.

    Science.gov (United States)

    Niemelä, Ville; Hämäläinen, Matti; Iinatti, Jari

    2013-01-01

    In 2002, Federal Communications Commission (FCC) was the first in defining regulations for ultra wideband (UWB) communications followed by Europe and Japan some years later. Focusing on impulse radio (IR) UWB, in 2007 was the time for the first published standard targeting in personal area networks, released by the IEEE. The second IEEE released standard including UWB definitions is targeted for wireless body area networks (WBAN) and was published in 2012. As the wireless communications has been and will be passing through almost any levels in society, the natural step with WBAN is using it in different medical, healthcare and wellbeing applications. The arguments for these are related to the modern lifestyle, in which people have increasingly more free time and are more interested in taking care of their health and wellbeing. Another challenge is the population composition, i.e., aging in developed countries which call for new solutions and procedures, particularly from cost wise. In this paper, we are evaluating UWB receivers based on the IEEE 802.15.6 physical layer definitions and capable of detecting differentially encoded modulation. The evaluation is performed using two different WBAN channel models.

  20. A versatile electrical penetration design qualified to IEEE Std. 317-1983

    International Nuclear Information System (INIS)

    Lankenau, W.; Wetherill, T.M.

    1994-01-01

    Although worldwide demand for new construction of nuclear power stations has been on a decline, the available opportunities for the design and construction of qualified electrical penetrations continues to offer challenges, requiring a highly versatile design. Versatility is necessary in order to meet unique customer requirements within the constraints of a design basis qualified to IEEE Std. 317-1983. This paper summarizes such a versatile electrical penetration designed, built and tested to IEEE Std. 317-1983. The principal features are described including major materials of construction. Some of the design constraints such as sealing requirements, and conductor density (including numerical example) are discussed. The requirements for qualification testing of the penetration assembly to IEEE Std. 317-1983 are delineated in a general sense, and some typical test ranges for preconditioning, radiation exposure, and LOCA are provided. The paper concludes by describing ways in which this versatile design has been adapted to meet unique customer requirements in a variety of nuclear power plants

  1. Segmentized Clear Channel Assessment for IEEE 802.15.4 Networks.

    Science.gov (United States)

    Son, Kyou Jung; Hong, Sung Hyeuck; Moon, Seong-Pil; Chang, Tae Gyu; Cho, Hanjin

    2016-06-03

    This paper proposed segmentized clear channel assessment (CCA) which increases the performance of IEEE 802.15.4 networks by improving carrier sense multiple access with collision avoidance (CSMA/CA). Improving CSMA/CA is important because the low-power consumption feature and throughput performance of IEEE 802.15.4 are greatly affected by CSMA/CA behavior. To improve the performance of CSMA/CA, this paper focused on increasing the chance to transmit a packet by assessing precise channel status. The previous method used in CCA, which is employed by CSMA/CA, assesses the channel by measuring the energy level of the channel. However, this method shows limited channel assessing behavior, which comes from simple threshold dependent channel busy evaluation. The proposed method solves this limited channel decision problem by dividing CCA into two groups. Two groups of CCA compare their energy levels to get precise channel status. To evaluate the performance of the segmentized CCA method, a Markov chain model has been developed. The validation of analytic results is confirmed by comparing them with simulation results. Additionally, simulation results show the proposed method is improving a maximum 8.76% of throughput and decreasing a maximum 3.9% of the average number of CCAs per packet transmission than the IEEE 802.15.4 CCA method.

  2. Spectrum Hole Identification in IEEE 802.22 WRAN using Unsupervised Learning

    Directory of Open Access Journals (Sweden)

    V. Balaji

    2016-01-01

    Full Text Available In this paper we present a Cooperative Spectrum Sensing (CSS algorithm for Cognitive Radios (CR based on IEEE 802.22Wireless Regional Area Network (WRAN standard. The core objective is to improve cooperative sensing efficiency which specifies how fast a decision can be reached in each round of cooperation (iteration to sense an appropriate number of channels/bands (i.e. 86 channels of 7MHz bandwidth as per IEEE 802.22 within a time constraint (channel sensing time. To meet this objective, we have developed CSS algorithm using unsupervised K-means clustering classification approach. The received energy level of each Secondary User (SU is considered as the parameter for determining channel availability. The performance of proposed algorithm is quantified in terms of detection accuracy, training and classification delay time. Further, the detection accuracy of our proposed scheme meets the requirement of IEEE 802.22 WRAN with the target probability of falsealrm as 0.1. All the simulations are carried out using Matlab tool.

  3. Analysis and Enhancement of IEEE 802.15.4e DSME Beacon Scheduling Model

    Directory of Open Access Journals (Sweden)

    Kwang-il Hwang

    2014-01-01

    Full Text Available In order to construct a successful Internet of things (IoT, reliable network construction and maintenance in a sensor domain should be supported. However, IEEE 802.15.4, which is the most representative wireless standard for IoT, still has problems in constructing a large-scale sensor network, such as beacon collision. To overcome some problems in IEEE 802.15.4, the 15.4e task group proposed various different modes of operation. Particularly, the IEEE 802.15.4e deterministic and synchronous multichannel extension (DSME mode presents a novel scheduling model to solve beacon collision problems. However, the DSME model specified in the 15.4e draft does not present a concrete design model but a conceptual abstract model. Therefore, in this paper we introduce a DSME beacon scheduling model and present a concrete design model. Furthermore, validity and performance of DSME are evaluated through experiments. Based on experiment results, we analyze the problems and limitations of DSME, present solutions step by step, and finally propose an enhanced DSME beacon scheduling model. Through additional experiments, we prove the performance superiority of enhanced DSME.

  4. A Novel Prioritization Scheme to Improve QoS in IEEE 802.11e Networks

    Directory of Open Access Journals (Sweden)

    Navid Tadayon

    2010-01-01

    Full Text Available IEEE 802.11 WLAN utilizes a distributed function at its MAC layer, namely, DCF to access the wireless medium. Due to its distributed nature, DCF is able to guarantee working stability in a wireless medium while maintaining the assembling and maintenance cost in a low level. However, DCF is inefficient in dealing with real-time traffics due to its incapability on providing QoS. IEEE 802.11e was introduced as a supplementary standard to cope with this problem. This standard introduces an Enhanced Distributed Coordination Function (EDCF that works based on diff-Serve model and can serve multiple classes of traffics (by using different prioritizations schemes. With the emergence of new time-sensitive applications, EDCF has proved to be yet inefficient in dealing with these kinds of traffics because it could not provide network with well-differentiated QoS. In this study, we propose a novel prioritization scheme to improve QoS level in IEEE 802.11e network. In this scheme, we replace Uniform PDF with Gamma PDF, which has salient differentiating properties. We investigate the suitability and superiority of this scheme on furnishing network with well-differentiated QoS using probabilistic analysis. We strengthen our claims by extensive simulation runs.

  5. IEEE 693 seismic qualification of composites for substation high-voltage equipment

    Energy Technology Data Exchange (ETDEWEB)

    Schiff, A.J. [Precision Measurement Instruments, Los Altos Hills, CA (United States); Kempner, L.Jr. [Bonneville Power Administration, Vancouver, BC (Canada)

    2004-07-01

    Standard 693-1997 of the Institute of Electrical and Electronic Engineers (IEEE) is the recommended practice for seismic design of substations. It represents a significant improvement in the way the power industry seismically qualifies substation high-voltage equipment. This paper described the use of IEEE Standard 693 for hollow-core composite insulators that are used on high-voltage transformers and demonstrated that changes are warranted. The following four failure modes associated with the composite insulator were discussed: bond degradation, bond failure, tube degradation and tube layer delamination. The authors evaluated the IEEE 693 qualification procedure of time history shake-table and static-pull tests and were concerned about acceptance criteria. It was shown that acceptance criteria are not valid for qualifying hollow-core composites and that static-pull tests are needed after the vibration qualification tests are completed. It was suggested that more research is warranted to determine if bonding at the top part of the flange can be eliminated, thereby eliminating bond degradation. The resulting increase in system damping would improve the dynamic response of the unit. 1 ref., 10 figs.

  6. Information management architecture for an integrated computing environment for the Environmental Restoration Program. Environmental Restoration Program, Volume 3, Interim technical architecture

    International Nuclear Information System (INIS)

    1994-09-01

    This third volume of the Information Management Architecture for an Integrated Computing Environment for the Environmental Restoration Program--the Interim Technical Architecture (TA) (referred to throughout the remainder of this document as the ER TA)--represents a key milestone in establishing a coordinated information management environment in which information initiatives can be pursued with the confidence that redundancy and inconsistencies will be held to a minimum. This architecture is intended to be used as a reference by anyone whose responsibilities include the acquisition or development of information technology for use by the ER Program. The interim ER TA provides technical guidance at three levels. At the highest level, the technical architecture provides an overall computing philosophy or direction. At this level, the guidance does not address specific technologies or products but addresses more general concepts, such as the use of open systems, modular architectures, graphical user interfaces, and architecture-based development. At the next level, the technical architecture provides specific information technology recommendations regarding a wide variety of specific technologies. These technologies include computing hardware, operating systems, communications software, database management software, application development software, and personal productivity software, among others. These recommendations range from the adoption of specific industry or Martin Marietta Energy Systems, Inc. (Energy Systems) standards to the specification of individual products. At the third level, the architecture provides guidance regarding implementation strategies for the recommended technologies that can be applied to individual projects and to the ER Program as a whole

  7. Green supplier development program selection using NGT and VIKOR under fuzzy environment

    DEFF Research Database (Denmark)

    Awasthi, Anjali; Govindan, Kannan

    2016-01-01

    Developing environmental performance of suppliers is critical for green supply chain management. Organizations are nowadays investing in various green supplier development programs to enhance their supplier performances. The decision to select the right program for green supplier development...... is often a challenging decision due to lack of prior experience, limited quantitative information, specific context of the organization, and varying supplier backgrounds. This paper addresses the problem of evaluating green supplier development programs and proposes a fuzzy NGT (Nominal Group Technique......)-VIKOR (VlseKriterijumska Optimizacija I Kompromisno Resenje) based solution approach. NGT is used to identify criteria for evaluating green supplier development programs. Fuzzy theory is used to address qualitative (linguistic) ratings for the alternatives and the selected criteria used under lack...

  8. Visual Environment for Rich Data Interpretation (VERDI) program for environmental modeling systems

    Science.gov (United States)

    VERDI is a flexible, modular, Java-based program used for visualizing multivariate gridded meteorology, emissions and air quality modeling data created by environmental modeling systems such as the CMAQ model and WRF.

  9. Whole-House Approach Benefits Builders, Buyers, and the Environment Building America Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    None

    2001-05-01

    This document provides an overview of the U.S. Department of Energy's Building America program. Building America works with the residential building industry to develop and implement innovative building processes and technologies.

  10. Risk assessment - a research program aimed at health risks from air pollution in the general environment

    International Nuclear Information System (INIS)

    Lindahl-Kiessling, K.; Ahlborg, U.; Bylin, G.; Ehrenberg, L.; Hemminki, K.; Lindell, B.; Nilsson, Robert; Bostroem, C.E.; Swarn, U.

    1991-01-01

    The paper presents a new research program for assessment of health risks caused by air pollutants. It is important to develop general methods for quantitative risk assessments and to improve the scientific base materials. (KAE)

  11. OPMILL - MICRO COMPUTER PROGRAMMING ENVIRONMENT FOR CNC MILLING MACHINES THREE AXIS EQUATION PLOTTING CAPABILITIES

    Science.gov (United States)

    Ray, R. B.

    1994-01-01

    OPMILL is a computer operating system for a Kearney and Trecker milling machine that provides a fast and easy way to program machine part manufacture with an IBM compatible PC. The program gives the machinist an "equation plotter" feature which plots any set of equations that define axis moves (up to three axes simultaneously) and converts those equations to a machine milling program that will move a cutter along a defined path. Other supported functions include: drill with peck, bolt circle, tap, mill arc, quarter circle, circle, circle 2 pass, frame, frame 2 pass, rotary frame, pocket, loop and repeat, and copy blocks. The system includes a tool manager that can handle up to 25 tools and automatically adjusts tool length for each tool. It will display all tool information and stop the milling machine at the appropriate time. Information for the program is entered via a series of menus and compiled to the Kearney and Trecker format. The program can then be loaded into the milling machine, the tool path graphically displayed, and tool change information or the program in Kearney and Trecker format viewed. The program has a complete file handling utility that allows the user to load the program into memory from the hard disk, save the program to the disk with comments, view directories, merge a program on the disk with one in memory, save a portion of a program in memory, and change directories. OPMILL was developed on an IBM PS/2 running DOS 3.3 with 1 MB of RAM. OPMILL was written for an IBM PC or compatible 8088 or 80286 machine connected via an RS-232 port to a Kearney and Trecker Data Mill 700/C Control milling machine. It requires a "D:" drive (fixed-disk or virtual), a browse or text display utility, and an EGA or better display. Users wishing to modify and recompile the source code will also need Turbo BASIC, Turbo C, and Crescent Software's QuickPak for Turbo BASIC. IBM PC and IBM PS/2 are registered trademarks of International Business Machines. Turbo

  12. Overview of the Space Launch System Ascent Aeroacoustic Environment Test Program

    Science.gov (United States)

    Herron, Andrew J.; Crosby, William A.; Reed, Darren K.

    2016-01-01

    Characterization of accurate flight vehicle unsteady aerodynamics is critical for component and secondary structure vibroacoustic design. The Aerosciences Branch at the National Aeronautics and Space Administration (NASA) Marshall Space Flight Center has conducted a test at the NASA Ames Research Center (ARC) Unitary Plan Wind Tunnels (UPWT) to determine such ascent aeroacoustic environments for the Space Launch System (SLS). Surface static pressure measurements were also collected to aid in determination of local environments for venting, CFD substantiation, and calibration of the flush air data system located on the launch abort system. Additionally, this test supported a NASA Engineering and Safety Center study of alternate booster nose caps. Testing occurred during two test campaigns: August - September 2013 and December 2013 - January 2014. Four primary model configurations were tested for ascent aeroacoustic environment definition. The SLS Block 1 vehicle was represented by a 2.5% full stack model and a 4% truncated model. Preliminary Block 1B payload and manned configurations were also tested, using 2.5% full stack and 4% truncated models respectively. This test utilized the 11 x 11 foot transonic and 9 x 7 foot supersonic tunnel sections at the ARC UPWT to collect data from Mach 0.7 through 2.5 at various total angles of attack. SLS Block 1 design environments were developed primarily using these data. SLS Block 1B preliminary environments have also been prepared using these data. This paper discusses the test and analysis methodology utilized, with a focus on the unsteady data collection and processing.

  13. Role of the pre- and post-natal environment in developmental programming of health and productivity.

    Science.gov (United States)

    Reynolds, Lawrence P; Caton, Joel S

    2012-05-06

    The concept that developmental insults (for example, poor pre- or postnatal nutrition) can have long-term consequences on health and well-being of the offspring has been termed developmental programming. In livestock, developmental programming affects production traits, including growth, body composition, and reproduction. Although low birth weight was used as a proxy for compromised fetal development in the initial epidemiological studies, based on controlled studies using livestock and other animal models in the last two decades we now know that developmental programming can occur independently of any effects on birth weight. Studies in humans, rodents, and livestock also have confirmed the critical role of the placenta in developmental programming. In addition, the central role of epigenetic regulation in developmental programming has been confirmed. Lastly, relatively simple therapeutic/management strategies designed to 'rescue' placental development and function are being developed to minimize the effects of developmental programming on health and productivity of humans, livestock, and other mammals. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  14. Conference Proceedings for 1997 IEEE 24th International Conference on Plasma Sciences, 19 - 22 May 1997, San Diego, California

    National Research Council Canada - National Science Library

    Hyman, Julius

    1997-01-01

    This 360 page softbound publication includes the following major sections, An invitation to ICOPS'97, Catamaran Resort Hotel Floor Pinas, Officers of the IEEE Nuclear and Plasma Sciences Society, Conference Information...

  15. NIH-IEEE 2015 Strategic Conference on Healthcare Innovations and Point-of-Care Technologies for Prec

    Science.gov (United States)

    NIH and the Institute for Electrical and Electronics Engineering, Engineering in Medicine and Biology Society (IEEE/EMBS) hosted the third iteration of the Healthcare Innovations and Point-of-Care Technologies Conference last week.

  16. Study of Allocation Guaranteed Time Slot Wireless Body Area Networks Based on IEEE 802.15.4

    Science.gov (United States)

    Yundra, E.; Harsono, G. D.

    2018-04-01

    This paper aims to determine the size of the Guaranteed Time Slot (GTS) on the super frame structure required for each sensor as well as to know the performance of the GTS resized system compared to the GTS standard on IEEE 802.15.4. This article proposes a scheme to improve IEEE 802.15.4 medium access control, called allocation Guaranteed Time Slot (ALGATIS). ALGATIS is expected to effectively allocate guaranteed time slot to the requested sensors, it adjusts the length of the slot in super frame duration based on the length of the packet data. This article presents a simulation experiment of IEEE 802.15.4, especially for star network, to predict the throughput of networks and average energy consumption. The simulation experiments show that the performance of ALGATIS is better than that of IEEE 802.15.4 standard in term of the throughput of networks and average energy consumption

  17. Performance Analysis of IEEE 802.11g TCM Waveforms Transmitted over a Channel with Pulse-Noise Interference

    National Research Council Canada - National Science Library

    Drivas, Athanasios

    2007-01-01

    .... The application of TCM combines FEC coding and M-ary modulation in one operation. The objective of this thesis is to investigate the performance of an orthogonal frequency-division multiplexing (OFDM) based IEEE...

  18. Implementation of DoS attack and mitigation strategies in IEEE 802.11b/g WLAN

    Science.gov (United States)

    Deng, Julia; Meng, Ke; Xiao, Yang; Xu, Roger

    2010-04-01

    IEEE 802.11 wireless Local Area Network (WLAN) becomes very prevalent nowadays. Either as a simple range extender for a home wired Ethernet interface, or as a wireless deployment throughout an enterprise, WLAN provides mobility, convenience, and low cost. However, an IEEE 802.11b/g wireless network uses the frequency of unlicensed 2.4GHz, which makes the network unsafe and more vulnerable than traditional Ethernet networks. As a result, anyone who is familiar with wireless network may initiate a Denial of Service (DoS) attack to influence the common communication of the network or even make it crash. In this paper, we present our studies on the DoS attacks and mitigation strategies for IEEE 802.11b/g WLANs and describe some initial implementations using IEEE 802.11b/g wireless devices.

  19. Implementation of IEEE-1588 timing and synchronization for ATCA control and data acquisition systems

    International Nuclear Information System (INIS)

    Correia, Miguel; Sousa, Jorge; Combo, Álvaro; Rodrigues, António P.; Carvalho, Bernardo B.; Batista, António J.N.; Gonçalves, Bruno; Correia, Carlos M.B.A.; Varandas, Carlos A.F.

    2012-01-01

    Highlights: ► IEEE-1588 over Ethernet protocol is implemented for the synchronization of all clock signals of an ATCA AMC carrier module. ► The ATCA hardware consists of an AMC quad-carrier main-board with PCI Express switching. ► IEEE-1588 is to be implemented on a Virtex-6 FPGA. ► Timing signals on the ATX-AMC4-PTP are managed and routed by a crosspoint-switch implemented on a Virtex-6 FPGA. ► Each clock signal source may be independently located (on each of the AMC cards, RTM or ATCA backplane). - Abstract: Control and data acquisition (C and DA) systems for Fusion experiments are required to provide accurate timing and synchronization (T and S) signals to all of its components. IPFN adopted PICMG's Advanced Telecommunications Computing Architecture (ATCA) industry standard to develop C and DA instrumentation. ATCA was chosen not only for its high throughput characteristics but also for its high availability (HA) features which become of greater importance in steady-state operation scenarios. However, the specified ATCA clock and synchronization interface may be too limited for the timing and synchronization needs in advanced Physics experiments. Upcoming specification extensions, developed by the “xTCA for Physics” workgroups, will contemplate, among others, a complementary timing specification, developed by the PICMG xTCA for Physics IO, Timing and Synchronization Technical Committee. The IEEE-1588 Precision Time Protocol (PTP) over Ethernet is one of the protocols, proposed by the Committee, aiming for precise synchronization of clocks in measurement and control systems, based on low jitter and slave-to-slave skew criteria. The paper presents an implementation of IEEE-1588 over Ethernet, in an ATCA hardware platform. The ATCA hardware consists of an Advanced Mezzanine Card (AMC) quad-carrier front board with PCI Express switching. IEEE-1588 is to be implemented on a Virtex-6 FPGA. Ethernet connectivity with the remote master clock is located on

  20. Active Learning Environments with Robotic Tangibles: Children's Physical and Virtual Spatial Programming Experiences

    Science.gov (United States)

    Burleson, Winslow S.; Harlow, Danielle B.; Nilsen, Katherine J.; Perlin, Ken; Freed, Natalie; Jensen, Camilla Nørgaard; Lahey, Byron; Lu, Patrick; Muldner, Kasia

    2018-01-01

    As computational thinking becomes increasingly important for children to learn, we must develop interfaces that leverage the ways that young children learn to provide opportunities for them to develop these skills. Active Learning Environments with Robotic Tangibles (ALERT) and Robopad, an analogous on-screen virtual spatial programming…

  1. Dependent-Chance Programming Models for Capital Budgeting in Fuzzy Environments

    Institute of Scientific and Technical Information of China (English)

    LIANG Rui; GAO Jinwu

    2008-01-01

    Capital budgeting is concerned with maximizing the total net profit subject to budget constraints by selecting an appropriate combination of projects. This paper presents chance maximizing models for capital budgeting with fuzzy input data and multiple conflicting objectives. When the decision maker sets a prospec-tive profit level and wants to maximize the chances of the total profit achieving the prospective profit level, a fuzzy dependent-chance programming model, a fuzzy multi-objective dependent-chance programming model, and a fuzzy goal dependent-chance programming model are used to formulate the fuzzy capital budgeting problem. A fuzzy simulation based genetic algorithm is used to solve these models. Numerical examples are provided to illustrate the effectiveness of the simulation-based genetic algorithm and the po-tential applications of these models.

  2. Student performance in computing education: an empirical analysis of online learning in programming education environments

    Science.gov (United States)

    Xia, Belle Selene; Liitiäinen, Elia

    2017-11-01

    The benefits of using online exercises have been analysed in terms of distance learning, automatic assessment and self-regulated learning. In this study, we have not found a direct proportional relationship between student performance in the course exercises that use online technologies and the exam grades. We see that the average submission rate to these online exercises is not positively correlated with the exercise points. Yet, our results confirm that doing exercises along supports student learning and skill accumulation equipping them with the knowledge of programming. While the student performance in programming courses is affected by factors such as prior background in programming, cognitive skills and the quality of teaching, completing the course exercises via learning-by-doing is an indispensable part of teaching. Based on the student feedback from the course survey, the students are highly satisfied with using online technologies as part of learning.

  3. Assessment of the impacts of the french nuclear program on the environment

    International Nuclear Information System (INIS)

    Naudet, G.

    1991-01-01

    The assessment of the impacts of the French nuclear program on atmosphere pollution is based on a macroeconomic long term model MELODY particularly detailed for the energy sector. The French energy strategy, characterized by its nuclear program, is compared with an alternative coal strategy based on coal-fired power plants. The coal strategy would have entailed different economic performances, a different energy balance, and, consequently, a different quality of air. For instance, by 1990, carbon emissions would have been 60% higher with the coal strategy; actually, they are 27% lower today than their 1973 level. The French nuclear program resulted both in a carbon emission reduction similar to the Toronto Conference target, and in a significant improvement of economic performances. 4 refs.; 10 figs.; 1 tab

  4. Incorporating Geographic Information Science in the BSc Environ-mental Science Program in Botswana

    Science.gov (United States)

    Akinyemi, Felicia O.

    2018-05-01

    Critical human capacity in Geographic Information Science (GISc) is developed at the Botswana International University of Science and Technology, a specialized, research university. Strategies employed include GISc courses offered each semester to students from various programs, the conduct of field-based projects, enrolment in online courses, geo-spatial initiatives with external partners, and final year research projects utilizing geospatial technologies. A review is made of available GISc courses embedded in the Bachelor of Science Environmental Science program. GISc courses are incorporated in three Bachelor degree programs as distinct courses. Geospatial technologies are employed in several other courses. Student researches apply GIS and Remote Sensing methods to environmental and geological themes. The overarching goals are to equip students in various disciplines to utilize geospatial technologies, and enhance their spatial thinking and reasoning skills.

  5. IEEE 802.15.4 ZigBee-Based Time-of-Arrival Estimation for Wireless Sensor Networks.

    Science.gov (United States)

    Cheon, Jeonghyeon; Hwang, Hyunsu; Kim, Dongsun; Jung, Yunho

    2016-02-05

    Precise time-of-arrival (TOA) estimation is one of the most important techniques in RF-based positioning systems that use wireless sensor networks (WSNs). Because the accuracy of TOA estimation is proportional to the RF signal bandwidth, using broad bandwidth is the most fundamental approach for achieving higher accuracy. Hence, ultra-wide-band (UWB) systems with a bandwidth of 500 MHz are commonly used. However, wireless systems with broad bandwidth suffer from the disadvantages of high complexity and high power consumption. Therefore, it is difficult to employ such systems in various WSN applications. In this paper, we present a precise time-of-arrival (TOA) estimation algorithm using an IEEE 802.15.4 ZigBee system with a narrow bandwidth of 2 MHz. In order to overcome the lack of bandwidth, the proposed algorithm estimates the fractional TOA within the sampling interval. Simulation results show that the proposed TOA estimation algorithm provides an accuracy of 0.5 m at a signal-to-noise ratio (SNR) of 8 dB and achieves an SNR gain of 5 dB as compared with the existing algorithm. In addition, experimental results indicate that the proposed algorithm provides accurate TOA estimation in a real indoor environment.

  6. AN IMAGE ENHANCEMENT ENVIRONMENT DESIGNED AT 32-BIT VERSION OF VISUAL BASIC 4 PROGRAMMING LANGUAGE USING THE WIN32 API FUNCTIONS

    Directory of Open Access Journals (Sweden)

    Aydın KIZILKAYA

    2000-01-01

    Full Text Available In this paper, using the Win32 API (Application Programming Interface functions and MDI (Multiple Document Interface programming technique, which is main principle of Windows system, designed an image enhancement environment at 32-bit version of Visual Basic 4 programming language is investigated. Image enhancement algorithms could be easily applied in this environment and each of results obtained could be separately showed in frames on same environment. Image enhancement techniques used in this environment are observed in spatial domain. With this program observing image enhancement techniques are contrast stretching, histogram equalization, thresholding, negative imaging, low-pass filtering, high-pass filtering and median filtering. In the filtering process of the images are utilized of the convolution techniques at this environment.

  7. Development and Study the Usage of Blended Learning Environment Model Using Engineering Design Concept Learning Activities to Computer Programming Courses for Undergraduate Students of Rajabhat Universities

    Directory of Open Access Journals (Sweden)

    Kasame Tritrakan

    2017-06-01

    Full Text Available The objectives of this research were to study and Synthesise the components, to develop, and to study the usage of blended learning environment model using engineering design concept learning activities to computer programming courses for undergraduate students of Rajabhat universities. The research methodology was divided into 3 phases. Phase I: surveying presents, needs and problems in teaching computer programming of 52 lecturers by using in-depth interview from 5 experienced lecturers. The model’s elements were evaluated by 5 experts. The tools were questionnaire, interview form, and model’s elements assessment form. Phase II: developing the model of blended learning environment and learning activities based on engineering design processes and confirming model by 8 experts. The tools were the draft of learning environment, courseware, and assessment forms. Phase III evaluating the effects of using the implemented environment. The samples were students which formed into 2 groups, 25 people in the experiment group and 27 people in the control group by cluster random sampling. The tools were learning environment, courseware, and assessment tools. The statistics used in this research were means, standard deviation, t-test dependent, and one-way MANOVA. The results found that: 1 Lecturers quite agreed with the physical, mental, social, and information learning environment, learning processes, and assessments. There were all needs in high level. However there were physical environment problems in high level yet quite low in other aspects. 2 The developed learning environment had 4 components which were a 4 types of environments b the inputs included blended learning environment, learning motivation factors, and computer programming content c the processes were analysis of state objectives, design learning environment and activities, developing learning environment and testing materials, implement, ation evaluation and evaluate, 4 the outputs

  8. A novel beamforming based model of coverage and transmission costing in IEEE 802.11 WLAN networks

    Directory of Open Access Journals (Sweden)

    Mehdi Guessous

    2017-09-01

    Full Text Available IEEE 802.11 WLAN indoor networks face major inherent and environmental issues such as interference, noise, and obstacles. At the same time, they must provide a maximal service performance in highly changing radio environments and conformance to various applications’ requirements. For this purpose, they require a solid design approach that considers both inputs from the radio interface and the upper-layer services at every design step. The modelization of radio area coverage is a key component in this process and must build on feasible work hypotheses. It should be able also to interpret highly varying characteristics of dense indoor environments, technology advances, service design best practices, end-to-end integration with other network parts: Local Area Network (LAN, Wide Area Network (WAN or Data Center Network (DCN. This work focuses on Radio Resource Management (RRM as a key tool to achieve a solid design in WLAN indoor environments by planning frequency channel assignment, transmit directions and corresponding power levels. Its scope is limited to tackle co-channel interference but can be easily extended to address cross-channel ones. In this paper, we consider beamforming and costing techniques to augment conventional RRM’s Transmit Power Control (TPC procedures that market-leading vendors has implemented and related research has worked on. We present a novel approach of radio coverage modelization and prove its additions to the cited related-work’s models. Our solution model runs three algorithms to evaluate transmission opportunities of Wireless Devices (WD under the coverage area. It builds on realistic hypotheses and a thorough system operation’s understanding to evaluate such an opportunity to transmit, overcomes limitations from compared related-work’s models, and integrates a hierarchical costing system to match Service Level Agreement (SLA expectations. The term “opportunity” in this context relates also to the new

  9. Alberta Environment's weir safety program : options for rehabilitation to improve public safety : a case study of the Calgary weir

    Energy Technology Data Exchange (ETDEWEB)

    Blakely, D [Alberta Environment, Edmonton, AB (Canada)

    2009-07-01

    Alberta Environment Water Management Operations (WMO) owns and operates 46 dams and 800 kilometres of canals in Alberta. The WMO consists of 120 staff and several contract operators to take care of this infrastructure. Most of the infrastructure supplies water for irrigation use, which adds 5 billion dollars to the provincial economy annually. Other water uses include stock watering, domestic use, municipal use, recreational use and habitat. Alberta Environment's weir safety program was also discussed along with options for rehabilitation to improve public safety. A case study of Calgary's Weir Dam on the Bow River was highlighted. A brief history of the dam was offered and safety programs around provincially-owned weirs were discussed. Photographs were included to illustrate some of the additional safety measures at the Calgary weir, such as suspended safety buoys upstream of the boom directing paddlers to the portage trail, and signage on the river that can be activated when the boom is out. Typical river users on the Calgary Bow River and safety history at the Calgary Weir were discussed along with other topics such as the Calgary Bow River weir project criteria; project design progress; pre-feasibility options; scale modelling; final design analysis; construction funding; and proposed changes to the safety program for the new weir configuration. figs.

  10. KAPSE (Kernel ADA Programming Support Environment) Interface Team Public Report. Volume 5.

    Science.gov (United States)

    1985-08-01

    terination of a child . It was pointed out, .howmver, that CAIS processes are closely analogous to Ada programs, which may include nwiny tasks, so this...NMlc)) - Write a single haractesr end cojp; end PM;/ 5.3.8.10 Easing a qualified area pr~zocedueRSEA( PORN : in ont PO TYP); Purposes This procedure

  11. Successful Programs for Undergraduate Women in Science and Engineering: "Adapting" versus "Adopting" the Institutional Environment

    Science.gov (United States)

    Fox, Mary Frank; Sonnert, Gerhard; Nikiforova, Irina

    2009-01-01

    This article focuses upon programs for undergraduate women in science and engineering, which are a strategic research site in the study of gender, science, and higher education. The design involves both quantitative and qualitative approaches, linking theory, method, questions, and analyses in ways not undertaken previously. Using a comprehensive,…

  12. 76 FR 69755 - National Customs Automation Program Test Concerning Automated Commercial Environment (ACE...

    Science.gov (United States)

    2011-11-09

    ... DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection National Customs Automation... announces U.S. Customs and Border Protection's (CBP's) plan to conduct a National Customs Automation Program... conveyance transporting the cargo to the United States. This data will fulfill merchandise entry requirements...

  13. Knowledge Sharing through Pair Programming in Learning Environments: An Empirical Study

    Science.gov (United States)

    Kavitha, R. K.; Ahmed, M. S.

    2015-01-01

    Agile software development is an iterative and incremental methodology, where solutions evolve from self-organizing, cross-functional teams. Pair programming is a type of agile software development technique where two programmers work together with one computer for developing software. This paper reports the results of the pair programming…

  14. Proposal of Modification Strategy of NC Program in the Virtual Manufacturing Environment

    Science.gov (United States)

    Narita, Hirohisa; Chen, Lian-Yi; Fujimoto, Hideo; Shirase, Keiichi; Arai, Eiji

    Virtual manufacturing will be a key technology in process planning, because there are no evaluation tools for cutting conditions. Therefore, virtual machining simulator (VMSim), which can predict end milling processes, has been developed. The modification strategy of NC program using VMSim is proposed in this paper.

  15. Creating Healthier Afterschool Environments in the Healthy Eating Active Communities Program

    Science.gov (United States)

    Hinkle, Arnell J.; Yoshida, Sallie

    2014-01-01

    Afterschool programs in California have the potential to play a major role in obesity prevention given that they serve close to a million low-income children. A five-year initiative called the Healthy Eating Active Communities (HEAC) was funded in 2005 by the California Endowment to demonstrate that disparities related to childhood obesity and…

  16. The Ocean as a Unique Therapeutic Environment: Developing a Surfing Program

    Science.gov (United States)

    Clapham, Emily D.; Armitano, Cortney N.; Lamont, Linda S.; Audette, Jennifer G.

    2014-01-01

    Educational aquatic programming offers necessary physical activity opportunities to children with disabilities and the benefits of aquatic activities are more pronounced for children with disabilities than for their able-bodied peers. Similar benefits could potentially be derived from surfing in the ocean. This article describes an adapted surfing…

  17. Laser Light Scattering, from an Advanced Technology Development Program to Experiments in a Reduced Gravity Environment

    Science.gov (United States)

    Meyer, William V.; Tscharnuter, Walther W.; Macgregor, Andrew D.; Dautet, Henri; Deschamps, Pierre; Boucher, Francois; Zuh, Jixiang; Tin, Padetha; Rogers, Richard B.; Ansari, Rafat R.

    1994-01-01

    Recent advancements in laser light scattering hardware are described. These include intelligent single card correlators; active quench/active reset avalanche photodiodes; laser diodes; and fiber optics which were used by or developed for a NASA advanced technology development program. A space shuttle experiment which will employ aspects of these hardware developments is previewed.

  18. The Proposed Model of Collaborative Virtual Learning Environment for Introductory Programming Course

    Science.gov (United States)

    Othman, Mahfudzah; Othman, Muhaini

    2012-01-01

    This paper discusses the proposed model of the collaborative virtual learning system for the introductory computer programming course which uses one of the collaborative learning techniques known as the "Think-Pair-Share". The main objective of this study is to design a model for an online learning system that facilitates the…

  19. Biomedical learning experiences for middle school girls sponsored by the Kansas State University Student Chapter of the IEEE EMBS.

    Science.gov (United States)

    Gruber, Lucinda; Griffith, Connor; Young, Ethan; Sullivan, Adriann; Schuler, Jeff; Arnold-Christian, Susan; Warren, Steve

    2009-01-01

    Learning experiences for middle school girls are an effective means to steer young women toward secondary engineering curricula that they might not have otherwise considered. Sponsorship of such experiences by a collegiate student group is worthwhile, as it gives the group common purpose and places college students in a position to mentor these young women. This paper addresses learning experiences in different areas of bio-medical engineering offered to middle school girls in November 2008 via a day-long workshop entitled "Engineering The Body." The Kansas State University (KSU) Student Chapter of the IEEE Engineering in Medicine and Biology Society (EMBS) worked with the KSU Women in Engineering and Science Program (WESP) to design and sponsor these experiences, which addressed the areas of joint mechanics, electrocardiograms, membrane transport, computer mouse design, and audio filters for cochlear implants. Fifty five middle-school girls participated in this event, affirming the notion that biomedical engineering appeals to young women and that early education and recruitment efforts have the potential to expand the biomedical engineering talent pool.

  20. Development of programming techniques for behaviors of nuclear robot in real environment

    International Nuclear Information System (INIS)

    Tsukune, Hideo; Ogasawara, Tsukasa; Hirukawa, Hirohisa; Kitagaki, Kosei; Onda, Hiromu; Nakamura, Akira

    1998-01-01

    Combinations of surface elements needed to determine the position and the posture of a robot have been investigated based on the morphological properties of each object and expressed in a tree form. Here, a way to construct an environment model using the task-directional instructing tree was introduced. Several surface elements to be used for modeling were prioritized taking consideration of the kind of tasks in the tree. This modeling with the instructing tree was found to be an effective method which allows to flexibly respond to severe environments including occlusion and specular reflexion, which often appear in nuclear installation. In addition, pseudo-contact point monitoring method was implemented into ''Takumi'', a sensor-based manipulation system developed in the previous year and the effectiveness of this system was examined through an experiment of putting a seal on a paper with the manipulator, suggesting availability in real working conditions. (M.N.)

  1. System response of a DOE Defense Program package in a transportation accident environment

    International Nuclear Information System (INIS)

    Chen, T.F.; Hovingh, J.; Kimura, C.Y.

    1992-01-01

    The system response in a transportation accident environment is an element to be considered in an overall Transportation System Risk Assessment (TSRA) framework. The system response analysis uses the accident conditions and the subsequent accident progression analysis to develop the accident source term, which in turn, is used in the consequence analysis. This paper proposes a methodology for the preparation of the system response aspect of the TSRA

  2. The skin microbiome: impact of modern environments on skin ecology, barrier integrity, and systemic immune programming.

    Science.gov (United States)

    Prescott, Susan L; Larcombe, Danica-Lea; Logan, Alan C; West, Christina; Burks, Wesley; Caraballo, Luis; Levin, Michael; Etten, Eddie Van; Horwitz, Pierre; Kozyrskyj, Anita; Campbell, Dianne E

    2017-01-01

    Skin barrier structure and function is essential to human health. Hitherto unrecognized functions of epidermal keratinocytes show that the skin plays an important role in adapting whole-body physiology to changing environments, including the capacity to produce a wide variety of hormones, neurotransmitters and cytokine that can potentially influence whole-body states, and quite possibly, even emotions. Skin microbiota play an integral role in the maturation and homeostatic regulation of keratinocytes and host immune networks with systemic implications. As our primary interface with the external environment, the biodiversity of skin habitats is heavily influenced by the biodiversity of the ecosystems in which we reside. Thus, factors which alter the establishment and health of the skin microbiome have the potential to predispose to not only cutaneous disease, but also other inflammatory non-communicable diseases (NCDs). Indeed, disturbances of the stratum corneum have been noted in allergic diseases (eczema and food allergy), psoriasis, rosacea, acne vulgaris and with the skin aging process. The built environment, global biodiversity losses and declining nature relatedness are contributing to erosion of diversity at a micro-ecological level, including our own microbial habitats. This emphasises the importance of ecological perspectives in overcoming the factors that drive dysbiosis and the risk of inflammatory diseases across the life course.

  3. Service program package for processing and analysis of the data on the state of environment and public health

    International Nuclear Information System (INIS)

    Vorob'ev, E.I.; Kornelyuk, V.A.; Kuz'menko, A.S.; Reznichenko, V.Yu.; Shestopalov, V.L.

    1984-01-01

    The problems related to the creation of universal service program packages (SPP) which are intended for processing the data on the state of environment and public health in the regions of large NPP dislocation are discussed. Peculiarities of the SSP, BMD and SENSOR SPPs as well as the ANGARA SPP developed on the base of the BMD and BMDP SPPs are considered. The ANGARA SPP is tested in the course of a large-scale medico-biological experiment, the purpose of which consisted in estimation of changes in the state of health of practically healthy people as bioindicator of slight changes in the environment. As a result of the analysis between 300 factors 45 most informative ones have been selected

  4. Proceedings of the ninth annual conference of the IEEE Engineering in Medicine and Biology Society

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    This book contains over 100 papers. Some of the titles are: Angular integrations and inter-projections correlation effects in CT reconstruction; Supercomputing environment for biomedical research; Program towards a computational molecular biology; Current problems in molecular biology computing; Signal averaging applied to positron emission tomography; First experimental results from a high spatial resolution PET prototype; and A coherent approach in computer-aided radiotherapy

  5. An intelligent environment for dynamic simulation program generation of nuclear reactor systems

    International Nuclear Information System (INIS)

    Ishizaka, Hiroaki; Gofuku, Akio; Yoshikawa, Hidekazu

    2004-01-01

    A graphical user interface system was developed for the two dynamic simulation systems based on modular programming methods: MSS and DSNP. The following works were made in conjunction with the system development: (1) conversion of the module libraries of both DSNP and MSS, (2) extension of DSNP- pre-compiler, (3) graphical interface for module integration, and (4) automatic converter of simple language descriptions for DSNP, where (1) and (2) were made on an engineering work station, while the rest (3) and (4), on Macintosh HyperCard. By using the graphical interface, a user can specify the structure of a simulation model, geometrical data, initial values of variables, etc. only by handling modules as icon on the pallet fields. The use of extended DSNP pre-compiler then generates the final product of dynamic simulation program automatically. The capability and effectiveness of the system was confirmed by a sample simulation of PWR SBLOCA transient in PORV stuck open event. (author)

  6. Private Administration – Favorable Environment for Implementing Programs and Campaigns of Public Relations?

    Directory of Open Access Journals (Sweden)

    Simona HAIDAU

    2012-11-01

    Full Text Available This paper refer to decision of the private administration organizations from the region northeast of Romania to implement programs and public relations campaigns from the socio-economic context in the current period. This decision of organizations above mentioned is strongly influenced by nature non-profit purposes they have, more precisely, to be involved in carrying out the public interest or community.

  7. The remediation process: Approach and elements of the Department of Energy's environmental restoration program in a Superfund environment

    International Nuclear Information System (INIS)

    Lehr, J.C.

    1993-01-01

    The Department of Energy (DOE) operates a large industrial complex located at various production, processing, testing, and research and development installations across the country. During the 40+ years of operation, this complex generated and managed waste to then-current standards. However, some of these waste management practices have subsequently been proven to be inadequate for long-term environmental protection. The Office of Environmental Restoration and Waste Management (EM) was established in 1989, when DOE's top priority changed from nuclear weapons production to environmental cleanup. The Environmental Restoration (ER) Program within EM was tasked to ensure that risks to human health and the environment posed by DOE's past operations at its nuclear facilities and sites are eliminated or reduced to prescribed, safe levels. Since its creation, the ER Program has been one of the fastest growing programs in the Department, demonstrating the Secretary's commitment to the new clean-up priority. (The 1989 budget was $400 million, while the 1993 budget is $1.8 billion.) As new technologies are developed and new management strategies implemented, the program will continue to expand. This paper describes the environmental remediation process from its early assessment phase to the final compliance effort

  8. Final Report from The University of Texas at Austin for DEGAS: Dynamic Global Address Space programming environments

    Energy Technology Data Exchange (ETDEWEB)

    Erez, Mattan

    2018-02-21

    The Dynamic, Exascale Global Address Space programming environment (DEGAS) project will develop the next generation of programming models and runtime systems to meet the challenges of Exascale computing. Our approach is to provide an efficient and scalable programming model that can be adapted to application needs through the use of dynamic runtime features and domain-specific languages for computational kernels. We address the following technical challenges: Programmability: Rich set of programming constructs based on a Hierarchical Partitioned Global Address Space (HPGAS) model, demonstrated in UPC++. Scalability: Hierarchical locality control, lightweight communication (extended GASNet), and ef- ficient synchronization mechanisms (Phasers). Performance Portability: Just-in-time specialization (SEJITS) for generating hardware-specific code and scheduling libraries for domain-specific adaptive runtimes (Habanero). Energy Efficiency: Communication-optimal code generation to optimize energy efficiency by re- ducing data movement. Resilience: Containment Domains for flexible, domain-specific resilience, using state capture mechanisms and lightweight, asynchronous recovery mechanisms. Interoperability: Runtime and language interoperability with MPI and OpenMP to encourage broad adoption.

  9. The Environment for Application Software Integration and Execution (EASIE), version 1.0. Volume 2: Program integration guide

    Science.gov (United States)

    Jones, Kennie H.; Randall, Donald P.; Stallcup, Scott S.; Rowell, Lawrence F.

    1988-01-01

    The Environment for Application Software Integration and Execution, EASIE, provides a methodology and a set of software utility programs to ease the task of coordinating engineering design and analysis codes. EASIE was designed to meet the needs of conceptual design engineers that face the task of integrating many stand-alone engineering analysis programs. Using EASIE, programs are integrated through a relational data base management system. In volume 2, the use of a SYSTEM LIBRARY PROCESSOR is used to construct a DATA DICTIONARY describing all relations defined in the data base, and a TEMPLATE LIBRARY. A TEMPLATE is a description of all subsets of relations (including conditional selection criteria and sorting specifications) to be accessed as input or output for a given application. Together, these form the SYSTEM LIBRARY which is used to automatically produce the data base schema, FORTRAN subroutines to retrieve/store data from/to the data base, and instructions to a generic REVIEWER program providing review/modification of data for a given template. Automation of these functions eliminates much of the tedious, error prone work required by the usual approach to data base integration.

  10. Programming HTML5 Applications Building Powerful Cross-Platform Environments in JavaScript

    CERN Document Server

    Kessin, Zachary

    2011-01-01

    HTML5 is not just a replacement for plugins. It also makes the Web a first-class development environment by giving JavaScript programmers a solid foundation for building industrial-strength applications. This practical guide takes you beyond simple site creation and shows you how to build self-contained HTML5 applications that can run on mobile devices and compete with desktop apps. You'll learn powerful JavaScript tools for exploiting HTML5 elements, and discover new methods for working with data, such as offline storage and multithreaded processing. Complete with code samples, this book is

  11. Placental adaptations to the maternal-fetal environment: implications for fetal growth and developmental programming.

    Science.gov (United States)

    Sandovici, Ionel; Hoelle, Katharina; Angiolini, Emily; Constância, Miguel

    2012-07-01

    The placenta is a transient organ found in eutherian mammals that evolved primarily to provide nutrients for the developing fetus. The placenta exchanges a wide array of nutrients, endocrine signals, cytokines and growth factors with the mother and the fetus, thereby regulating intrauterine development. Recent studies show that the placenta is not just a passive organ mediating maternal-fetal exchange. It can adapt its capacity to supply nutrients in response to intrinsic and extrinsic variations in the maternal-fetal environment. These dynamic adaptations are thought to occur to maximize fetal growth and viability at birth in the prevailing conditions in utero. However, some of these adaptations may also affect the development of individual fetal tissues, with patho-physiological consequences long after birth. Here, this review summarizes current knowledge on the causes, possible mechanisms and consequences of placental adaptive responses, with a focus on the regulation of transporter-mediated processes for nutrients. This review also highlights the emerging roles that imprinted genes and epigenetic mechanisms of gene regulation may play in placental adaptations to the maternal-fetal environment. Copyright © 2012 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

  12. AN APPLICATION OF MECHATRONICS IN MANUFACTURING WITH OBJECT-ORIENTED PROGRAMMING IN A WINDOWS ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    M. L. J. Jürgens

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: This project is part of a program to establish mechatronics knowledge and skills in the Department of Industrial Engineering at the University of Stellenbosch. A low-cost, but accurate mechatronic application was developed by automating a pipe-bending machine. Accelerating software development through object-oriented programming was also investigated. The object-oriented software was developed with a structure that increases the independence between the application object and the data acquisition system. A teach-pendant and large, multicolour displays with interactive buttons were developed to ensure a user-friendly machine. .The positioning of the headstock was controlled by a pulsing control algorithm, which achieved an accuracy of ±0.15 degrees and a repeatability of ±0.24 degrees. The design of the machine and software and experimental results are discussed in this paper.

    AFRIKAANSE OPSOMMING: Hierdie projek vorm deeI van 'n program om kennis en vaardighede in die aanwending van megatronika in die Departement Bedryfsingenieurswese van die Universiteit van Stellenbosch te vestig. 'n Lae koste, maar akkurate megatronika toepassing is ontwikkel deur 'n pypbuigmasjien te outomatiseer. Versnelling van sagteware-ontwikkeling deur die toepassing van objek-georienteerde programmering is ook ondersoek. Die objek-georienteerde sagteware is ontwikkel met 'n struktuur wat onafhanklikheid tussen die toepassings-objek en die dataver-samelingstelsel bevorder. 'n Handkontrole eenheid en groot veelkleurige rekenaarvertoonskerms met interaktiewe drukknoppe om 'n gebruikersvriendelike masjien te vereker is ontwikkel. Die posisionering van die kopstuk word beheer deur 'n puls-algoritrne wat 'n akkuraatheid van ±O.l5 grade en 'n herhaalbaarheid van ±0.24 grade lewer. Die ontwerp van die masjien en sagteware en eksperimentele resultate word in hierdie artikel bespreek.

  13. DoS detection in IEEE 802.11 with the presence of hidden nodes

    Directory of Open Access Journals (Sweden)

    Joseph Soryal

    2014-07-01

    Full Text Available The paper presents a novel technique to detect Denial of Service (DoS attacks applied by misbehaving nodes in wireless networks with the presence of hidden nodes employing the widely used IEEE 802.11 Distributed Coordination Function (DCF protocols described in the IEEE standard [1]. Attacker nodes alter the IEEE 802.11 DCF firmware to illicitly capture the channel via elevating the probability of the average number of packets transmitted successfully using up the bandwidth share of the innocent nodes that follow the protocol standards. We obtained the theoretical network throughput by solving two-dimensional Markov Chain model as described by Bianchi [2], and Liu and Saadawi [3] to determine the channel capacity. We validated the results obtained via the theoretical computations with the results obtained by OPNET simulator [4] to define the baseline for the average attainable throughput in the channel under standard conditions where all nodes follow the standards. The main goal of the DoS attacker is to prevent the innocent nodes from accessing the channel and by capturing the channel’s bandwidth. In addition, the attacker strives to appear as an innocent node that follows the standards. The protocol resides in every node to enable each node to police other nodes in its immediate wireless coverage area. All innocent nodes are able to detect and identify the DoS attacker in its wireless coverage area. We applied the protocol to two Physical Layer technologies: Direct Sequence Spread Spectrum (DSSS and Frequency Hopping Spread Spectrum (FHSS and the results are presented to validate the algorithm.

  14. DoS detection in IEEE 802.11 with the presence of hidden nodes.

    Science.gov (United States)

    Soryal, Joseph; Liu, Xijie; Saadawi, Tarek

    2014-07-01

    The paper presents a novel technique to detect Denial of Service (DoS) attacks applied by misbehaving nodes in wireless networks with the presence of hidden nodes employing the widely used IEEE 802.11 Distributed Coordination Function (DCF) protocols described in the IEEE standard [1]. Attacker nodes alter the IEEE 802.11 DCF firmware to illicitly capture the channel via elevating the probability of the average number of packets transmitted successfully using up the bandwidth share of the innocent nodes that follow the protocol standards. We obtained the theoretical network throughput by solving two-dimensional Markov Chain model as described by Bianchi [2], and Liu and Saadawi [3] to determine the channel capacity. We validated the results obtained via the theoretical computations with the results obtained by OPNET simulator [4] to define the baseline for the average attainable throughput in the channel under standard conditions where all nodes follow the standards. The main goal of the DoS attacker is to prevent the innocent nodes from accessing the channel and by capturing the channel's bandwidth. In addition, the attacker strives to appear as an innocent node that follows the standards. The protocol resides in every node to enable each node to police other nodes in its immediate wireless coverage area. All innocent nodes are able to detect and identify the DoS attacker in its wireless coverage area. We applied the protocol to two Physical Layer technologies: Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS) and the results are presented to validate the algorithm.

  15. Medium-term generation programming in competitive environments: a new optimisation approach for market equilibrium computing

    International Nuclear Information System (INIS)

    Barquin, J.; Centeno, E.; Reneses, J.

    2004-01-01

    The paper proposes a model to represent medium-term hydro-thermal operation of electrical power systems in deregulated frameworks. The model objective is to compute the oligopolistic market equilibrium point in which each utility maximises its profit, based on other firms' behaviour. This problem is not an optimisation one. The main contribution of the paper is to demonstrate that, nevertheless, under some reasonable assumptions, it can be formulated as an equivalent minimisation problem. A computer program has been coded by using the proposed approach. It is used to compute the market equilibrium of a real-size system. (author)

  16. Energy and Environment. Background report for a program for actions, Miljoe '93

    International Nuclear Information System (INIS)

    Bernegaard, L.; Froste, H.; Timm, B.; Simonsson, C.; Brinkman, I.

    1993-06-01

    The report describes the environmental responsibilities of the energy sector, the present and probable future developments of the sector in relation to the defined environmental goals, and suggests areas for continued efforts. The analysis is based on the common European programs and on other international agreements. The development of the swedish energy sector is mainly influenced by the decisions to phase-out nuclear power, not to exploit the remaining unexploited rivers for hydroelectric power and to stabilize and, in a long perspective, reduce the emissions of CO 2 . 39 refs, 5 figs, 38 tabs

  17. Information Management Architecture for an Integrated Computing Environment for the Environmental Restoration Program. Volume 1, Introduction

    International Nuclear Information System (INIS)

    1994-09-01

    As part of the Environmental Restoration Program at Martin Marietta, IEM (Information Engineering Methodology) was developed as part of a complete and integrated approach to the progressive development and subsequent maintenance of automated data sharing systems. This approach is centered around the organization's objectives, inherent data relationships and business practices. IEM provides the Information Systems community with a tool kit of disciplined techniques supported by automated tools. It includes seven stages: Information Strategy Planning; Business Area Analysis; Business System Design; Technical Design; Construction; Transition; Production

  18. A Novel Energy Saving Algorithm with Frame Response Delay Constraint in IEEE 802.16e

    Science.gov (United States)

    Nga, Dinh Thi Thuy; Kim, Mingon; Kang, Minho

    Sleep-mode operation of a Mobile Subscriber Station (MSS) in IEEE 802.16e effectively saves energy consumption; however, it induces frame response delay. In this letter, we propose an algorithm to quickly find the optimal value of the final sleep interval in sleep-mode in order to minimize energy consumption with respect to a given frame response delay constraint. The validations of our proposed algorithm through analytical results and simulation results suggest that our algorithm provide a potential guidance to energy saving.

  19. A Secure Simplification of the PKMv2 Protocol in IEEE 802.16e-2005

    DEFF Research Database (Denmark)

    Yuksel, Ender; Nielson, Hanne Riis; Nielsen, Christoffer Rosenkilde

    2007-01-01

    Static analysis is successfully used for automatically validating security properties of classical cryptographic protocols. In this paper, we shall employ the same technique to a modern security protocol for wireless networks, namely the latest version of the Privacy and Key Management protocol...... for IEEE 802.16e, PKMv2. This protocol seems to have an exaggerated mixture of security features. Thus, we iteratively investigate which components are necessary for upholding the security properties and which can be omitted safely. This approach is based on the LySa process calculus and employs...

  20. An IEEE 802.3 Compatible Real Time Medium Access Control with Length-based Priority

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A new medium access control method is proposed over the predominant Ethernet broadcast channel. Taking advantages of intrinsic variable length characteristic of standard Ethernet frame, message-oriented dynamic priority mechanism is established. Prioritized medium access control operates under a so-called block mode in event of collisions.High priority messages have a chance to preempt block status incurred by low priority ones. By this means, the new MAC provides a conditional deterministic real time performance beyond a statistical one. Experiments demonstrate effectiveness and attractiveness of the proposed scheme. Moreover, this new MAC is completely compatible with IEEE802.3.