WorldWideScience

Sample records for programme mark hadfield

  1. Strengthening Hadfield steel welds by nitrogen alloying

    International Nuclear Information System (INIS)

    Efstathiou, C.; Sehitoglu, H.

    2009-01-01

    Strengthening Hadfield steel weld repairs by introducing nitrogen into the weld region was proven to be feasible via two welding techniques. The first technique required a pure Hadfield steel filler material to be diffusion treated in a high pressure nitrogen gas environment, and subsequently used during tungsten inert gas welding with a pure argon shielding gas. The second technique used a Hadfield steel filler material, and a 10% nitrogen containing argon shielding gas during tungsten inert gas welding. Both techniques increased the yield strength, the hardening rate, and the ultimate strength of the weld region. Using optical microscopy, scanning electron microscopy, and Auger spectroscopy, we determined that the increased strength of the weld region resulted from a combination of nitrogen alloying and microstructural refinement

  2. Improving Marking Reliability of Scientific Writing with the Developing Understanding of Assessment for Learning Programme

    Science.gov (United States)

    Bird, Fiona L.; Yucel, Robyn

    2013-01-01

    The Developing Understanding of Assessment for Learning (DUAL) programme was developed with the dual aims of improving both the quality and consistency of feedback students receive and the students' ability to use that feedback to improve. DUAL comprises a range of processes (including marking rubrics, sample reports, moderation discussions and…

  3. Hadfield steels with Nb and Ti carbides

    International Nuclear Information System (INIS)

    Vatavuk, J.; Goldenstein, H.

    1987-01-01

    The Hadfield Steels and the mechanisms responsible for its high strain hardening rate were reviewed. Addition of carbide forming alloying elements to the base compostion was discussed, using the matrix sttel concept. Three experimental crusher jaws were cast, with Nb and Nb + Ti added to the usual Hadfiedl compostion, with enough excess carbon to allow the formation of MC carbides. Samples for metallographic analysis were prepared from both as cast and worn out castings. The carbic morphology was described. Partition of alloying elements was qualitatively studied, using Energy Dispersive Espectroscopy in SEM. The structure of the deformed layer near the worn surface was studied by optical metalography and microhardness measurements. The results showed that fatigue cracking is one of the wear mechanisms is operation in association with the ciclic work hardening of the surface of worn crusher jaws. (Author) [pt

  4. Cyclic deformation and fatigue behaviors of Hadfield manganese steel

    Energy Technology Data Exchange (ETDEWEB)

    Kang, J. [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Zhang, F.C., E-mail: zfc@ysu.edu.cn [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Long, X.Y. [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Lv, B. [School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao 066004 (China)

    2014-01-03

    The cyclic deformation characteristics and fatigue behaviors of Hadfield manganese steel have been investigated by means of its ability to memorize strain and stress history. Detailed studies were performed on the strain-controlled low cycle fatigue (LCF) and stress-controlled high cycle fatigue (HCF). Initial cyclic hardening to saturation or peak stress followed by softening to fracture occurred in LCF. Internal stress made the dominant contribution to the fatigue crack propagation until failure. Effective stress evolution revealed the existence of C–Mn clusters with short-range ordering in Hadfield manganese steel and demonstrated that the interaction between C atoms in the C–Mn cluster and dislocation was essential for its cyclic hardening. The developing/developed dislocation cells and stacking faults were the main cyclic deformation microstructures on the fractured sample surface in LCF and HCF, which manifested that fatigue failure behavior of Hadfield manganese steel was induced by plastic deformation during strain-controlled or stress-controlled testing.

  5. Low-cycle fatigue behaviors of pre-hardening Hadfield steel

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Chen [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Lv, Bo [College of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao 066004 (China); Wang, Fei [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Zhang, Fucheng, E-mail: zfc@ysu.edu.cn [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004 (China)

    2017-05-17

    Low-cycle fatigue behaviors of the pre-hardening (PH) and the water-quenching (WQ) Hadfield steel were studied using optical microscopy, transmission electron microscopy, and electron backscatter diffraction technique. The effect of the PH treatment on low-cycle fatigue behavior of the Hadfield steel was analyzed through comparing the cyclic hardening/softening behaviors and the changing regulations of stress amplitude, internal stress, and effective stress at different total strain amplitudes. Results showed obvious differences in fatigue behaviors between the PH (with a cold rolling deformation degree of 40%) and the WQ Hadfield steels. Transient hardening followed by cyclic stability behavior occurred in the PH Hadfield steel under cyclic loading, whereas cyclic softening behavior was barely observed. The fatigue life of the PH Hadfield steel was higher than that of the WQ Hadfield steel at relatively low strain amplitudes, while a contrary result was obtained at relatively high strain amplitudes. At low strain amplitudes, the deformation twins induced in the PH Hadfield steel could enhance the multiplication and slip process of dislocations, which actually improved the deformation uniformity. The long-range motion of dislocations was intensified at high strain amplitudes. However, the dislocation motion was also blocked by twin boundaries. As a result, the interactions between dislocations and deformation twins enhanced, finally causing severe dislocation accumulation. These two effects of deformation twins on dislocation motion eventually resulted in different low-cycle fatigue behaviors of the PH Hadfield steel.

  6. Programme

    OpenAIRE

    Hobday, E, fl. 1905, artist

    2003-01-01

    A photograph of an illustrated programme listing dances. The illustration shows a snake charmer playing to a snake while another man watches. Buildings and trees can be seen behind a wall in the distance. In the lower right-hand corner of the programme is the signature 'E. Hobday'. The programme is almost certainly related to the Punjab Ball, Lahore. It is placed next to the Punjab Ball Menu in the album and the Menu is also illustrated by 'E. Hobday'.

  7. Operating experiences and utilization programmes of the BAEC 3 MW TRIGA Mark-II research reactor of Bangladesh

    International Nuclear Information System (INIS)

    Haque, M.M.; Soner, M.A.M.; Saha, P.K.; Salam, M.A.; Zulquarnain, M.A.

    2008-01-01

    The 3 MW TRIGA Mark-II research reactor of Bangladesh Atomic Energy Commission (BAEC) has been operating since September 14, 1986. The reactor is used for radioisotope production ( 131 I, 99m Tc, 46 Sc), various R and D activities, manpower training and education. The reactor has been operated successfully since its commissioning with the exception of a few reportable incidents. Of these, the decay tank leakage incident of 1997 is considered to be the most significant one. As a result of this incident, reactor operation at full power remained suspended for about 4 years. However, the reactor operation was continued during this period at a power level of 250 kW to cater the needs of various R and D groups, which required lower neutron flux for their experiments. This was made possible by establishing a temporary by pass connection across the decay tank using local technology. The reactor was made operational again at full power after successful replacement of the damaged decay tank in August 2001. At that time, several modifications of the reactor cooling system along with its associated structures were also implemented and then necessary testing and commissioning of the newly installed component/equipment were carried out. The other incident was the contamination of the Dry Central Thimble (DCT) that took place in March 2002 when a pyrex vial containing 50g of TeO 2 powder got melted inside the DCT. The vial was melted due to high heat generation on its surface while the reactor was operated for 8 hours at 3 MW for trial production of Iodine-131 ( 131 I). A Wet Central Thimble (WCT) was used to replace the damaged DCT in June 2002 such that the reactor operation could be resumed. The WCT was again replaced by a new DCT in June 2003 such that radioisotope production could be continued. The facility has so far been used to train up a total of 27 personnel including several foreign nationals to the level of Senior Reactor Operator (SRO) and Reactor Operator (RO). The

  8. A detailed investigation of the strain hardening response of aluminum alloyed Hadfield steel

    Science.gov (United States)

    Canadinc, Demircan

    The unusual strain hardening response exhibited by Hadfield steel single and polycrystals under tensile loading was investigated. Hadfield steel, which deforms plastically through the competing mechanisms slip and twinning, was alloyed with aluminum in order to suppress twinning and study the role of slip only. To avoid complications due to a grained structure, only single crystals of the aluminum alloyed Hadfield steel were considered at the initial stage of the current study. As a result of alloying with aluminum, twinning was suppressed; however a significant increase in the strain hardening response was also present. A detailed microstructural analysis showed the presence of high-density dislocation walls that evolve in volume fraction due to plastic deformation and interaction with slip systems. The very high strain hardening rates exhibited by the aluminum alloyed Hadfield steel single crystals was attributed to the blockage of glide dislocations by the high-density dislocation walls. A crystal plasticity model was proposed, that accounts for the volume fraction evolution and rotation of the dense dislocation walls, as well as their interaction with the active slip systems. The novelty of the model lies in the simplicity of the constitutive equations that define the strain hardening, and the fact that it is based on experimental data regarding the microstructure. The success of the model was tested by its application to different crystallographic orientations, and finally the polycrystals of the aluminum alloyed Hadfield steel. Meanwhile, the capability of the model to predict texture was also observed through the rotation of the loading axis in single crystals. The ability of the model to capture the polycrystalline deformation response provides a venue for its utilization in other alloys that exhibit dislocation sheet structures.

  9. The comparative studies of ADI versus Hadfield cast steel wear resistance

    Directory of Open Access Journals (Sweden)

    Mieczysław Kaczorowski

    2011-04-01

    Full Text Available The results of comparative studies of wear resistance of ADI versus high manganese Hadfield cast steel are presented. For evaluation ofwear resistance three type of ADI were chosen. Two of them were of moderate strength ADI with 800 and 1000MPa tensile strength whilethe third was 1400MPa tensile strength ADI. The specimens were cut from ADI test YII type casting poured and heat treated in Institute ofFoundry in Krakow. The pin on disc method was used for wear resistance experiment. The specimens had a shape of 40mm long rod withdiameter 6mm. The load and speed were 100N and 0,54m/s respectively. It was concluded that the wear resistance of ADI is comparablewith high manganese cast steel and in case of low tensile grade ADI and is even better for high strength ADI than Hadfield steel.

  10. Effect of N+Cr alloying on the microstructures and tensile properties of Hadfield steel

    Energy Technology Data Exchange (ETDEWEB)

    Chen, C. [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Zhang, F.C., E-mail: zfc@ysu.edu.cn [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004 (China); Wang, F. [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Liu, H.; Yu, B.D. [China Railway Shanhaiguan Bridge Group Co. LTD, Qinhuangdao 066205 (China)

    2017-01-02

    The microstructures and tensile behaviors of traditional Hadfield steel, named Mn12 steel, and Hadfield steel alloyed with N+Cr, named Mn12CrN steel were studied through optical microscopy, transmission electron microscopy, and scanning electron microscopy, among others. Three different tensile strain rates of 5×10{sup −4}, 5×10{sup −3}, and 5×10{sup −2} s{sup −1} were selected in the tensile test. The deformation microstructures and fracture morphologies of the two steels after fracture in the tensile test were observed to analyze the tensile deformation response to different tensile strain rates. Results showed that the grain size of Mn12CrN steel was evidently refined after alloying with N+Cr. The grain would not become abnormally coarse even with increasing austenitizing temperature. During tensile deformation, the strength and plasticity of Mn12CrN steel were superior to those of Mn12 steel at the same strain rate. With increasing the strain rate, the changes in strength and plasticity of Mn12CrN steel were less sensitive to tensile strain rate compared with Mn12 steel. The effects of grain refinement and N+Cr alloying on dynamic strain aging and deformation twining behaviors were responsible for this lack of sensitivity to strain rate.

  11. Effect of N+Cr alloying on the microstructures and tensile properties of Hadfield steel

    International Nuclear Information System (INIS)

    Chen, C.; Zhang, F.C.; Wang, F.; Liu, H.; Yu, B.D.

    2017-01-01

    The microstructures and tensile behaviors of traditional Hadfield steel, named Mn12 steel, and Hadfield steel alloyed with N+Cr, named Mn12CrN steel were studied through optical microscopy, transmission electron microscopy, and scanning electron microscopy, among others. Three different tensile strain rates of 5×10 −4 , 5×10 −3 , and 5×10 −2 s −1 were selected in the tensile test. The deformation microstructures and fracture morphologies of the two steels after fracture in the tensile test were observed to analyze the tensile deformation response to different tensile strain rates. Results showed that the grain size of Mn12CrN steel was evidently refined after alloying with N+Cr. The grain would not become abnormally coarse even with increasing austenitizing temperature. During tensile deformation, the strength and plasticity of Mn12CrN steel were superior to those of Mn12 steel at the same strain rate. With increasing the strain rate, the changes in strength and plasticity of Mn12CrN steel were less sensitive to tensile strain rate compared with Mn12 steel. The effects of grain refinement and N+Cr alloying on dynamic strain aging and deformation twining behaviors were responsible for this lack of sensitivity to strain rate.

  12. Significance of dislocations in the mechanism of Hadfield cast steel strengthening

    International Nuclear Information System (INIS)

    Stradomski, Z.; Morgiel, J.; Olszewski, J.

    1999-01-01

    The paper presents the results of microstructural examination of the adfield cast steel (L120G13 according to Polish Standards) strengthened by explosion method, which is an attractive alternative of the surface treatment of metal materials regarding its technological, economical and organizational aspects. The presented results have been obtained by means of qualitative and quantitative analysis of thin foils taken at different distances from the material surface being strengthened by single, double or triple detonation of 3 mm thick charges of explosive. The high pressure, order of 18 GPa, causes significant changes in dislocation structure of the austenite matrix. The strengthening of Hadfield cast steel during explosion is based on the increase of the dislocation density by several times as related to the supersaturated state and on the creation of dislocation bands consisting of short, densely tangled dislocations. Plastic deformation mechanisms i. e., slip lines and micro-twins, are definitively of minor importance. It has been also proved by means of the nuclear resonance method that the explosion do not cause changes in distribution of carbon atoms in the nearest neighbourhood of Fe atoms and that austenite is not transformed into the α-martensite or the hexagonal ε-phase. (author)

  13. Acoustic emission evolution during sliding friction of Hadfield steel single crystal

    Science.gov (United States)

    Lychagin, D. V.; Novitskaya, O. S.; Kolubaev, A. V.; Sizova, O. V.

    2017-12-01

    Friction is a complex dynamic process. Direct observation of processes occurring in the friction zone is impossible due to a small size of a real contact area and, as a consequence, requires various additional methods applicable to monitor a tribological contact state. One of such methods consists in the analysis of acoustic emission data of a tribological contact. The use of acoustic emission entails the problem of interpreting physical sources of signals. In this paper, we analyze the evolution of acoustic emission signal frames in friction of Hadfield steel single crystals. The chosen crystallographic orientation of single crystals enables to identify four stages related to friction development as well as acoustic emission signals inherent in these stages. Acoustic emission signal parameters are studied in more detail by the short-time Fourier transform used to determine the time variation of the median frequency and its power spectrum. The results obtained will facilitate the development of a more precise method to monitor the tribological contact based on the acoustic emission method.

  14. Stretch Marks

    Science.gov (United States)

    ... completely without the help of a dermatologist or plastic surgeon. These doctors may use one of many types of treatments — from actual surgery to techniques like microdermabrasion and laser treatment — to reduce the appearance of stretch marks. These techniques are ...

  15. Fabrication of Hadfield-Cored Multi-layer Steel Sheet by Roll-Bonding with 1.8-GPa-Strength-Grade Hot-Press-Forming Steel

    Science.gov (United States)

    Chin, Kwang-Geun; Kang, Chung-Yun; Park, Jaeyeong; Lee, Sunghak

    2018-05-01

    An austenitic Hadfield steel was roll-bonded with a 1.8-GPa-strength-grade martensitic hot-press-forming (HPF) steel to fabricate a multi-layer steel (MLS) sheet. Near the Hadfield/HPF interface, the carburized and decarburized layers were formed by the carbon diffusion from the Hadfield (1.2%C) to HPF (0.35%C) layers, and could be regarded as kinds of very thin multi-layers of 35 μm in thickness. The tensile test and fractographic data indicated that the MLS sheet was fractured abruptly within the elastic range by the intergranular fracture occurred in the carburized layer. This was because C was mainly segregated at prior austenite grain boundaries in the carburized layer, which weakened grain boundaries to induce the intergranular fracture. In order to solve the intergranular facture problem, the MLS sheet was tempered at 200 °C. The stress-strain curve of the tempered MLS sheet lay between those of the HPF and Hadfield sheets, and a rule of mixtures was roughly satisfied. Tensile properties of the MLS sheet were dramatically improved after the tempering, and the intergranular fracture was erased completely. In particular, the yield strength up to 1073 MPa along with the high strain hardening and excellent ductility of 32.4% were outstanding because the yield strength over 1 GPa was hardly achieved in conventional austenitic steels.

  16. Prayer marks.

    Science.gov (United States)

    Abanmi, Abdullah A; Al Zouman, Abdulrahman Y; Al Hussaini, Husa; Al-Asmari, Abdulrahman

    2002-07-01

    Prayer marks (PMs) are asymptomatic, chronic skin changes that consist mainly of thickening, lichenification, and hyperpigmentation, and develop over a long period of time as a consequence of repeated, extended pressure on bony prominences during prayer. Three hundred and forty-nine Muslims and 24 non-Muslims were examined for the appearance of PMs at different body sites. The prospective study of 349 Muslims (both males and females) with regular praying habits showed the occurrence of PMs on specific locations, such as the forehead, knees, ankles, and dorsa of the feet, leading to dermatologic changes consisting of lichenification and hyperpigmentation. The incidence of PMs was significantly higher in males than in females. Older subjects (over 50 years of age) demonstrated a significantly higher frequency of lichenification and hyperpigmentation, suggesting that repeated pressure and friction for prolonged periods are the causative factors for the development of PMs. Histologic examination of skin biopsies from the affected sites showed compact orthokeratosis, hypergranulosis, dermal papillary fibrosis, and dermal vascularization. PMs were not associated with any risk of secondary complications, such as erythema, bullous formation, and infections. PMs are commonly occurring dermatologic changes in Muslims who pray for prolonged periods.

  17. Effect of changing polarity of graphite tool/ Hadfield steel workpiece couple on machining performances in die sinking EDM

    Directory of Open Access Journals (Sweden)

    Özerkan Haci Bekir

    2017-01-01

    Full Text Available In this study, machining performance ouput parameters such as machined surface roughness (SR, material removal rate (MRR, tool wear rate (TWR, were experimentally examined and analyzed with the diversifying and changing machining parameters in (EDM. The processing parameters (input par. of this research are stated as tool material, peak current (I, pulse duration (ton and pulse interval (toff. The experimental machinings were put into practice by using Hadfield steel workpiece (prismatic and cylindrical graphite electrodes with kerosene dielectric at different machining current, polarity and pulse time settings. The experiments have shown that the type of tool material, polarity (direct polarity forms higher MRR, SR and TWR, current (high current lowers TWR and enhances MRR, TWR and pulse on time (ton=48□s is critical threshold value for MRR and TWR were influential on machining performance in electrical discharge machining.

  18. Evaluation of The Effects of Cutting Parameters On The Surface Roughness During The Turning of Hadfield Steel With Response Surface Methodology

    Directory of Open Access Journals (Sweden)

    Ergün EKİCİ

    2014-12-01

    Full Text Available Hadfield steel (X120Mn12 is widely used in the engineering applications due to its excellent wear resistance. In this study, the effects of the cutting parameters on the surface roughness were investigated in relation to the lathe process carried out on Hadfield steel. The experiments were conducted at a cutting speed of 80, 110, 140 m/min, feed rate of 0.2, 0.3, 0.4 mm/rev and depth of cut 0.2, 0.4, 0.6 mm, using coated carbide tools. Regarding the evaluation of the machinability of Hadfield steel, a model was formed utilizing the response surface method (RSM. For the determination of the effects of the cutting parameters on the surface roughness, the central composite design (CCD and variance analysis (ANOVA were used. By means of the model formed as a result of the experimental study, it was demonstrated that among the cutting parameters, the feed rate is the most effective parameter on the surface roughness, with a contribution ratio of 90.28%. It was determined that the surface roughness increases with increasing feed rate. With respect to the effect on the surface roughness, the feed rate was followed by the cutting speed with a contribution ratio of 3.1% and the cutting depth with a contribution ratio of 1.7%.

  19. The influence of temperature on the tribological properties of the metastable austenite in Hadfield cast steel hardened by explosion

    International Nuclear Information System (INIS)

    Stradomski, Z.

    1999-01-01

    The paper presents the tribological tests of Hadfield cast steel subjected to the explosion pre-strengthening and then to aging at temperatures of 150 o C or 410 o C. The examined material has been in the form of cast steel plates 30 mm thick, pre-strengthened with flat charges of the Hardex-70 explosive of the detonation rate of 7200 m/s. The strengthening has been done by the single, double or tipple detonation of the 3 mm thick charges of the explosive placed directly on the cast steel surfaces. The hardness change exhibits 72-78% increase of its value as compared with the supersaturated state. The assessment of the abrasive wear resistance has been performed by means of the T-05 device operating in the 'roller-block'system under the load of 50 N. The test results confirm the very high effectiveness of the strengthening operation, the values of the investigated properties being 7-15 times higher as compared with the initial (supersaturated) state, depending on the multiplicity of the explosion repeating. Because of the dislocational character of the strengthening mechanism, the aging process performed at 150 o C for 794 hours, and at 410 o C for 286 hours, results in rapid decreasing of the tribological properties of the cast steel, their values being now by 4 and 12 times lower, respectively, than for the explosion-strengthened state of the material. (author)

  20. Reconfiguring trade mark law

    DEFF Research Database (Denmark)

    Elsmore, Matthew James

    2013-01-01

    -border setting, with a particular focus on small business and consumers. The article's overall message is to call for a rethink of received wisdom suggesting that trade marks are effective trade-enabling devices. The case is made for reassessing how we think about European trade mark law.......First, this article argues that trade mark law should be approached in a supplementary way, called reconfiguration. Second, the article investigates such a reconfiguration of trade mark law by exploring the interplay of trade marks and service transactions in the Single Market, in the cross...

  1. Mark Tompkins Canaccord

    OpenAIRE

    Mark Tompkins Canaccord

    2018-01-01

    Mark Tompkins Canaccord is a senior technologist for ecosystem and water resources management in SEC SAID Oakland, California office. In his career which lasts over fifteen years Mark has worked on project involving lake restorations, clean water engineering, ecological engineering and management, hydrology, hydraulics, sediment transport and other projects for environmental planning all over the country. Mark Tompkins Canaccord tries to blend his skills of planning and engineering with s...

  2. Lujan Mark-4

    Energy Technology Data Exchange (ETDEWEB)

    Mocko, Michael Jeffrey [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Zavorka, Lukas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Koehler, Paul E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-13

    This is a review of Mark-IV target neutronics design. It involved the major redesign of the upper tier, offering harder neutron spectra for upper-tier FPs; a redesign of the high-resolution (HR) moderator; and a preservation of the rest of Mark-III features.

  3. Mark Stock | NREL

    Science.gov (United States)

    Stock Mark Stock Scientific Visualization Specialist Mark.Stock@nrel.gov | 303-275-4174 Dr. Stock , virtual reality, parallel computing, and manipulation of large spatial data sets. As an artist, he creates . Stock built the SUNLIGHT artwork that is installed on the Webb Building in downtown Denver. In addition

  4. Interview with Professor Mark Wilcox.

    Science.gov (United States)

    Wilcox, Mark

    2016-08-01

    Mark Wilcox speaks to Georgia Patey, Commissioning Editor: Professor Mark Wilcox is a Consultant Microbiologist and Head of Microbiology at the Leeds Teaching Hospitals (Leeds, UK), the Professor of Medical Microbiology at the University of Leeds (Leeds, UK), and is the Lead on Clostridium difficile and the Head of the UK C. difficile Reference Laboratory for Public Health England (PHE). He was the Director of Infection Prevention (4 years), Infection Control Doctor (8 years) and Clinical Director of Pathology (6 years) at the Leeds Teaching Hospitals. He is Chair of PHE's Rapid Review Panel (reviews utility of infection prevention and control products for National Health Service), Deputy Chair of the UK Department of Health's Antimicrobial Resistance and Healthcare Associated Infection Committee and a member of PHE's HCAI/AR Programme Board. He is a member of UK/European/US working groups on C. difficile infection. He has provided clinical advice as part of the FDA/EMA submissions for the approval of multiple novel antimicrobial agents. He heads a healthcare-associated infection research team at University of Leeds, comprising approximately 30 doctors, scientists and nurses; projects include multiple aspects of C. difficile infection, diagnostics, antimicrobial resistance and the clinical development of new antimicrobial agents. He has authored more than 400 publications, and is the coeditor of Antimicrobial Chemotherapy (5th/6th/7th Editions, 15 December 2007).

  5. Mark 1 Test Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Mark I Test Facility is a state-of-the-art space environment simulation test chamber for full-scale space systems testing. A $1.5M dollar upgrade in fiscal year...

  6. Mark Raidpere portreefotod Kielis

    Index Scriptorium Estoniae

    1999-01-01

    Kieli Linnagaleriis avatud 2. Ars Baltica fototriennaalil 'Can You Hear Me?' esindab Eestit Mark Raidpere seeriaga 'Portreed 1998'. Näituse Eesti-poolne kuraator Anu Liivak, kataloogiteksti kirjutas Anders Härm. Tuntumaid osalejaid triennaalil Wolfgang Tillmans

  7. Marks of Metal Copenhell

    DEFF Research Database (Denmark)

    2015-01-01

    Planchebaseret udendørs udstilling på musikfestivalen Copenhell 18-20/6 2015. En mindre udgave af udstillingen Marks of Metal - Logodesign og visualitet i heavy metal. Udarbejdet i samarbejde med Mediemuseet.......Planchebaseret udendørs udstilling på musikfestivalen Copenhell 18-20/6 2015. En mindre udgave af udstillingen Marks of Metal - Logodesign og visualitet i heavy metal. Udarbejdet i samarbejde med Mediemuseet....

  8. COMPUTER HARDWARE MARKING

    CERN Multimedia

    Groupe de protection des biens

    2000-01-01

    As part of the campaign to protect CERN property and for insurance reasons, all computer hardware belonging to the Organization must be marked with the words 'PROPRIETE CERN'.IT Division has recently introduced a new marking system that is both economical and easy to use. From now on all desktop hardware (PCs, Macintoshes, printers) issued by IT Division with a value equal to or exceeding 500 CHF will be marked using this new system.For equipment that is already installed but not yet marked, including UNIX workstations and X terminals, IT Division's Desktop Support Service offers the following services free of charge:Equipment-marking wherever the Service is called out to perform other work (please submit all work requests to the IT Helpdesk on 78888 or helpdesk@cern.ch; for unavoidable operational reasons, the Desktop Support Service will only respond to marking requests when these coincide with requests for other work such as repairs, system upgrades, etc.);Training of personnel designated by Division Leade...

  9. Augmented marked graphs

    CERN Document Server

    Cheung, King Sing

    2014-01-01

    Petri nets are a formal and theoretically rich model for the modelling and analysis of systems. A subclass of Petri nets, augmented marked graphs possess a structure that is especially desirable for the modelling and analysis of systems with concurrent processes and shared resources.This monograph consists of three parts: Part I provides the conceptual background for readers who have no prior knowledge on Petri nets; Part II elaborates the theory of augmented marked graphs; finally, Part III discusses the application to system integration. The book is suitable as a first self-contained volume

  10. Identification markings for gemstones

    International Nuclear Information System (INIS)

    Dreschhoff, G.A.M.; Zeller, E.J.

    1980-01-01

    A method is described of providing permanent identification markings to gemstones such as diamond crystals by irradiating the cooled gemstone with protons in the desired pattern. The proton bombardment results in a reaction limited to a defined plane and converting the bombarded area of the plane into a different crystal lattice from that of the preirradiated stone. (author)

  11. Interview with Mark Watson

    Directory of Open Access Journals (Sweden)

    Katy Shaw

    2016-04-01

    Full Text Available Mark Watson is a British comedian and novelist. His five novels to date – 'Bullet Points' (2004, 'A Light-Hearted Look At Murder' (2007, 'Eleven' (2010, 'The Knot' (2012 and 'Hotel Alpha' (2014 – explore human relationships and communities in contemporary society. His latest novel Hotel Alpha tells the story of an extraordinary hotel in London and two mysterious disappearances that raise questions no one seems willing to answer. External to the novel, readers can also discover more about the hotel and its inhabitants in one hundred extra stories that expand the world of the novel and can be found at http://www.hotelalphastories.com. In conversation here with Dr Katy Shaw, Mark offers some reflections on his writing process, the field of contemporary literature, and the vitality of the novel form in the twenty-first century.

  12. Isotopic marking and tracers

    International Nuclear Information System (INIS)

    Morel, F.

    1997-01-01

    The use of radioactive isotopes as tracers in biology has been developed thanks to the economic generation of the required isotopes in accelerators and nuclear reactors, and to the multiple applications of tracers in the life domain; the most usual isotopes employed in biology are carbon, hydrogen, phosphorus and sulfur isotopes, because these elements are present in most of organic molecules. Most of the life science knowledge appears to be dependent to the extensive use of nuclear tools and radioactive tracers; the example of the utilization of radioactive phosphorus marked ATP to study the multiple reactions with proteins, nucleic acids, etc., is given

  13. Ceremony marking Einstein Year

    CERN Multimedia

    2005-01-01

    Sunday 13th November at 10:00amat Geneva's St. Peter's Cathedral To mark Einstein Year and the importance of the intercultural dialogue of which it forms a part, a religious service will take place on Sunday 13 November at 10 a.m. in St. Peter's Cathedral, to which CERN members and colleagues are warmly welcomed. Pastor Henry Babel, senior minister at the Cathedral, will speak on the theme: 'God in Einstein's Universe'. Diether Blechschmidt will convey a message on behalf of the scientific community.

  14. Minimal Marking: A Success Story

    Science.gov (United States)

    McNeilly, Anne

    2014-01-01

    The minimal-marking project conducted in Ryerson's School of Journalism throughout 2012 and early 2013 resulted in significantly higher grammar scores in two first-year classes of minimally marked university students when compared to two traditionally marked classes. The "minimal-marking" concept (Haswell, 1983), which requires…

  15. Crispv programme

    International Nuclear Information System (INIS)

    Marinkovicj, N.

    CRISPV (Criticality and Spectrum code) is a multigroup neutron spectrum code for homogeneous reactor cores and is actually a somewhat modified version of the original CRISP programme. It is a combination of DATAPREP-II and BIGG-II programmes. It is assumed that the reactor cell is a cylindrical fuel rod in the light or heavy water moderator. DATEPREP-II CODE forms the multigroup data for homogeneous reactor and prepares the input parameters for the BIGG-II code. It has its own nuclear data library on a separate tape in binary mode. BIGG-II code is a multigroup neutron spectrum and criticality code for a homogenized medium. It has as well its own separate data library. In the CRISPV programme the overlay structure enables automatic handling of data calculated in the DATAPREP-II programme and needed in the BIGG-II core. Both programmes are written in FORTRAN for CDC 3600. Using the programme is very efficient and simple

  16. Efecto del V y el Si Sobre la Microestructura de Depósitos Realizados con Electrodos Tubulares Revestidos de Alto Contenido de Mn (Hadfield

    Directory of Open Access Journals (Sweden)

    Manuel Rodríguez

    2017-10-01

    Full Text Available Resumen: Las aleaciones para el relleno superficial Fe-Mn-C (Hadfield han demostrado una excelente resistencia al desgaste bajo altas cargas dinámicas. En los últimos años se han realizado numerosos estudios para aumentar la resistencia al desgaste y mejorar su desempeño, a través de la introducción de otros elementos de aleación. En el presente trabajo se investiga la microestructura y dureza de los depósitos de relleno con alto contenido de Mn y adiciones de 1.2% de V y 2.4% de Si. Los depósitos estudiados se realizaron utilizando electrodos tubulares revestidos fabricados a escala de laboratorio. Las fases y microconstituyentes en el metal depositado se identificaron mediante microscopía óptica (MO, electrónica de barrido (MEB, difracción de rayos X (DRX, dureza y microdureza. De acuerdo a los resultados obtenidos, la adición de V al sistema aleante originó que la fase predominante fuera la austenita. Además, contribuyó a la formación de carburos de vanadio (VC en la microestructura de la capa de relleno, sin observarse la presencia de carburos complejos. Por otra parte, la presencia de Si favoreció la formación de una red de ferrita interdendrítica. La adición de estos elementos de aleación mejoró las propiedades de estos depósitos, potencializando su uso en aplicaciones que requieren alta resistencia al desgaste bajo altas cargas.

  17. SLARette Mark 2 system

    International Nuclear Information System (INIS)

    Burnett, D.J.

    1992-01-01

    The SLAR (Spacer Location and Repositioning) program has developed the technology and tooling necessary to locate and reposition the fuel channel spacers that separate the pressure tube from the calandria tube in a CANDU reactor. The in-channel SLAR tool contains all the inspection probes, and is capable of moving spacers under remote control. The SLAR inspection computer system translates all eddy currents and ultrasonic signals from the in-channel tool into various graphic displays. The in-channel SLAR tool can be delivered and manipulated in a fuel channel by either a SLAR delivery machine or a SLARette delivery machine. The SLAR delivery machine consists of a modified fuelling machine, and is capable of operating under totally remote control in automatic or semi-automatic mode. The SLARette delivery machine is a smaller less automated version, which was designed to be quickly installed, operated, and removed from a limited number of fuel channels during regular annual maintenance outages. This paper describes the design and operation of the SLARette Mark 2 system. 5 figs

  18. Monitoring programme

    International Nuclear Information System (INIS)

    1994-06-01

    Her Majesty's Inspectorate of Pollution's 1992 report on its programme of monitoring radioactive substances is presented. Site operators' returns are verified and the report provides independent data on the environmental impact of authorized disposal of radioactive wastes. Radiation doses which may have been received by members of the public, fall well below the International Commission for Radiological Protection's (ICRP) recommended annual doses. (UK)

  19. Mark Kostabi soovib muuta inimesi õnnelikumaks / Kalev Mark Kostabi

    Index Scriptorium Estoniae

    Kostabi, Kalev Mark, 1960-

    2008-01-01

    Kalev Mark Kostabi oma sisekujunduslikest eelistustest, ameeriklaste ja itaallaste kodude sisekujunduse erinevustest, kunstist kui ruumikujunduse ühest osast, oma New Yorgi ja Rooma korterite kujundusest

  20. Technology Programme

    Energy Technology Data Exchange (ETDEWEB)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo [ed.

    2005-07-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  1. Technology Programme

    International Nuclear Information System (INIS)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo

    2005-01-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  2. NotaMark industrial laser marking system: a new security marking technology

    Science.gov (United States)

    Moreau, Vincent G.

    2004-06-01

    Up until now, the only variable alphanumeric data which could be added to banknotes was the number, applied by means of impact typographical numbering boxes. As an additional process or an alternative to this mechanical method, a non-contact laser marking process can be used offering high quality and greater levels of flexibility. For this purpose KBA-GIORI propose an exclusive laser marking solution called NotaMark. The laser marking process NotaMark is the ideal solution for applying variable data and personalizing banknotes (or any other security documents) with a very high resolution, for extremely large production volumes. A completely integrated solution has been developed comprised of laser light sources, marking head units, and covers and extraction systems. NotaMark allows the marking of variable data by removing locally and selectively, specific printed materials leaving the substrate itself untouched. A wide range of materials has already been tested extensively. NotaMark is a new security feature which is easy to identify and difficult to counterfeit, and which complies with the standard mechanical and chemical resistance tests in the security printing industry as well as with other major soiling tests. The laser marking process opens up a whole new range of design possibilities and can be used to create a primary security feature such as numbering, or to enhance the value of existing features.

  3. ISOLDE PROGRAMME

    CERN Multimedia

    Fedosseev, V; Herfurth, F; Scheidenberger, C; Geppert, C; Gorges, C; Ratajczyk, T; Wiederhold, J C; Vogel, S; Munch, M K; Nieminen, P; Pakarinen, J J A; Lecesne, N; Bouzomita, H; Grinyer, J; Marques moreno, F M; Parlog, M; Blank, B A; Pedroza, J; Ghetta, V; Lozeva, R; Zacarias, S M; Guillemaud mueller, D S; Cottereau, E; Cheikh mhamed, M; Tusseau nenez, S; Tungate, G; Walker, P M; Smith, A G; Fitzpatrick, C; Dominik, W M; Karny, M; Ciemny, A A; Nyman, G H; Thies, R M A; Lindberg, S K G; Langouche, G F; Velten, P; Araujo escalona, V I; Boudreau, M; Domnanich, K A; Richter, D; Lutter, R J; Javaji, A; Engel, R Y; Wiehr, S; Nacher gonzalez, E; Jungclaus, A; Ribeiro jimenez, G; Marroquin alonso, I; Cal gonzalez, J; Paziy, V; Salsac, M; Murphy, C; Podolyak, Z F; Bajoga, A D; Butler, P; Pritchard, A; Colosimo, S J; Steer, A N; Fox, S P; Wadsworth, B A; Truesdale, V L; Al monthery, M; Bracco, A; Guttormsen, M S; Badea, M N; Calinescu, S; Ujeniuc, S; Cederkall, J A; Zemlyanoy, S; Donets, E D; Golovkov, M; Schweitzer, D K; Vranicar, A; Harrichunder, S; Ncube, M; Nannini, A; Strisovska, J; Wolf, E; Gerten, R F; Lehnert, J; Rainovski, G I; Pospisil, S; Datta pramanik, U; Benzoni, G; Fedorov, D; Maier, F M; Bonanni, A; Pfeiffer, B; Griesel, T; Wehner, L W; Mikkelsen, M; Recchia, F; Lenzi, S M; Smith, J F; Kelly, C M; Acosta sanchez, L A; Chavez lomeli, E R; De melo bandeira tavares, P M; Vieira, J M; Martins da silva, M A; Lima lopes, A M; Lopes leal, T J; Mader, J; Kessler, P; Laurent, B G; Schweikhard, L C; Marx, G H; Kulczycka, E; Komorowska, M; Da silva, M F; Goncalves marques, C P; Baptista peres, M A; Welander, J E; Reiter, P; Miller, C; Martin sanchez-cano, D; Wiens, A; Blazhev, A A; Braun, N; Cappellazzo, M V; Birkenbach, B; Gerst, R; Dannhoff, M F; Sithole, M J; Bilgier, B; Nardelli, S; Araujo mendes, C M; Agramunt ros, J; Valencia marin, E; Pantea, E; Hessberger, F P; Leduc, A J; Mitsuoka, S; Carbonari, A W; Buchegger, F J; Garzon camacho, A; Dapo, H; Papka, P; Stachura, M K; Stora, T; Marsh, B A; Thiboud, J A; Heylen, H; Antalic, S; Stahl, C; Bauer, C; Thurauf, M; Maass, B; Sturm, S; Boehm, C; Wolf, N R; Ways, M; Steinsberger, T P; Riisager, K; Ruotsalainen, P A; Bastin, B; Duval, F T; Penessot, G; Flechard, X D; Desrues, P; Giovinazzo, J; Kurtukian nieto, T; Ascher, P E L; Roccia, S; Matea, I; Croizet, H A G; Bonnin, C M; Morfouace, P; Smith, A J; Guin, R; Banerjee, D; Gunnlaugsson, H P; Ohtsubo, T; Zhukov, M V; Tengborn, E A; Welker, A; Giannopoulos, E; Dessagne, P; Juscamaita vivanco, Y; Da costa pereira, L M; Hustings, J; Yu, H; Kruecken, R; Nowak, A K; Jankowski, M; Cano ott, D; Galve lahoz, P; Murphy, A S J; Shand, C M; Jones, G D; Herzberg, R; Ikin, P; Revill, J P; Everett, C; Napoli, D R; Scarel, G; Larsen, A; Tornyi, T G; Pascu, S G; Stroe, L; Toma, S; Jansson, K; Dronjak fahlander, M; Krupko, S; Hurst, A M; Veskovic, M; Nikolov, J; Masenda, H; Sibanda, W N; Rocchini, M; Klimo, J; Deicher, M; Wichert, T; Kronenberg, J; Helmke, A; Meliani, Z; Ivanov, V S; Green, B L; Keatings, J M; Kuti, I; Halasz, Z; Henry, M O; Bras de sequeira amaral, V; Espirito santo, F; Da silva, D J; Rosendahl, S; Vianden, R J; Speidel, K; Agarwal, I; Faul, T; Kownacki, J M; Martins correia, J G; Lorenz, K; Costa miranda, S M; Granadeiro costa, A R; Zyabkin, D; Kotthaus, T; Pfeiffer, M; Gironi, L; Jensen, A; Romstedt, F; Constantino silva furtado, I; Heredia cardona, J A; Jordan martin, M D; Montaner piza, A; Zacate, M O; Plewinski, F; Mesli, A; Akakpo, E H; Pichard, A; Hergemoller, F; Neu, W; Fallis starhunter, J P; Voulot, D; Mrazek, J; Ugryumov, V; Savreux, R P; Kojouharov, I M; Kern, R O; Papst, O; Fitting, J; Lauer, M; Kirsebom, O S; Jensen, K L; Jokinen, A; Rahkila, P J; Hager, U D K; Konki, J P; Dubois, M; Orr, N A; Fabian, X; Huikari, J E; Goigoux, T; Magron, C; Zakari, A A; Maietta, M; Bachelet, C E M; Roussiere, B; Li, R; Canavan, R L; Lorfing, C; Foster, R M; Gislason, H P; Shayestehaminzadeh, S; Qi, B; Mukai, M; Watanabe, Y; Willmann, L; Kurcewicz, W; Wimmer, K; Meisel, Z P; Dorvaux, O; Nowacki, F; Koudriavtsev, I; Lievens, P; Delaure, B J P; Neyens, G; Ceruti, S; Bunka, M; Vermeulen, C; Umbricht, C A; De boer, J; Podadera aliseda, I; Alcorta moreno, M; Pesudo fortes, V; Zielinska, M; Korten, W; Wang, C H; Lotay, G J; Mason, P; Rice, S J; Regan, P H; Willenegger, L M; Andreev, A; Yavuzkanat, N; Hass, M; Kumar, V; Valiente dobon, J J; Crespo campo, L; Zamfir, N - V; Deleanu, D; Clisu, C; Jeppesen, H B; Wu, C; Pain, S D; Stracener, D W; Wuosmaa, A H; Szilner, S; Colovic, P; Matousek, V; Venhart, M; Birova, M; Li, X; Stuchbery, A E; Lellep, G M; Chakraborty, S; Leoni, S; Chupp, T; Yilmaz, C; Severin, G; Garcia ramos, J E; Newton, M E; Hadinia, B; Mc glynn, E; Monteiro de sena silvares de carvalho, I; Friedag, P; Figuera, P; Koos, V; Meot, V H; Pauwels, D B; Jancso, A; Srebrny, J; Alves, E J; David bosne, E; Bengtsson, L; Kalkuehler, M; Albers, M; Bharuth-ram, K; Akkus, B; Hemmingsen, L B S; Pedersen, J T; Dos santos redondo, L M; Rubio barroso, B; Algora, A; Kozlov, V; Mavela, D L; Mokhles gerami, A; Keeley, N; Bernardo da silva, E; Unzueta solozabal, I; Schell, J; Szybowicz, M; Yang, X; Plavec, J; Lassen, J; Johnston, K; Coquard, L; Bloch, T P; Bonig, E S; Stegmann, R; Ignatov, A; Paschalis, S; Fernandez martinez, G; Schilling, M; Habermann, T; Von hahn, R; Minaya ramirez, E E; Moore, I D; Wang, Y; Saastamoinen, A J; Grahn, T; Herzan, A; Stolze, S M; Clement, E; Dijon, A; Shornikov, A; Lienard, E; Gibelin, J D; Pain, C; Canchel, G; Simpson, G S; Latrasse, L P; Huang, W; Forest, D H; Billowes, J; Flanagan, K; Strashnov, I; Binnersley, C L; Sanchez poncela, M; Simpson, J; Morrall, P S; Grant, A F; Charisopoulos, S; Lagogiannis, A; Bhattacharya, C; Olafsson, S; Stepaniuk, M; Tornqvist, H T; Heinz, A M; White iv, E R; Courtin, S; Marechal, F; Da silva fenta, A E; De lemos lima, T A; Stryjczyk, M; Dockx, K; Haller, S; Rizzi, M; Reichert, S B; Bonn, J; Thirolf, P G; Garcia rios, A R; Gugliermina, V M; Cubero campos, M A; Sanchez tembleque, V; Benito garcia, J; Senoville, M; Mountford, D J; Gelletly, W; Alharbi, T S T; Wilson, E; Rigby, S V; Andreoiu, C; Paul, E S; Harkness, L J; Judson, D S; Wraith, C; Van esbroeck, K; Wadsworth, R; Cubiss, J G; Harding, R D; Vaintraub, S; Mandal, S K; Scarpa, D; Hoff, P; Syed naeemul, H; Borcea, R; Balabanski, D L; Marginean, R; Rotaru, F; Rudolph, D; Fahlander, C H; Chudoba, V; Kay, B P; Soic, N; Naidoo, D; Veselsky, M; Kliman, J; Raisanen, J A; Dietrich, M; Maung maung than, M M T; Reed, M W; Danchev, M T; Ray, J; Roy, M; Hammen, M; Capponi, L; Veghne csatlos, M M; Fryar, J; Mirzadeh vaghefi, S P; Trindade pereira, A M; De pinho oliveira, G N; Bakenecker, A; Tramm, C; Germic, V; Morel, P A; Kowalczyk, M; Matejska-minda, M; Wolinska-cichocka, M; Ringvall moberg, A; Mantovan, R; Fransen, C H; Radeck, F; Schneiders, D W; Steinbach, T; Vibenholt, J E; Magnussen, M J; Stevnhoved, H M; Comas lijachev, V; Dasenbrock-gammon, N M; Perkowski, J; O'neill, G G; Matveev, Y; Wegner, M; Liu, Z; Perez alvarez, T; Cerato, L; Radchenko, V; Molholt, T E; Tabares giraldo, J A; Srnka, D; Dlouhy, Z; Beck, D; Werner, V R; Homm, I; Eliseev, S; Blaum, K; Probst, M B; Kaiser, C J; Martin, J A; Refsgaard, J; Peura, P J; Greenlees, P T; Auranen, K; Delahaye, P; Traykov, E K; Perez loureiro, D; Mery, A A; Couratin, C; Tsekhanovich, I; Lunney, D; Gaulard, C V; Mottram, A D; Cullen, D M; Das, S K; Van de walle, J; Mazzocchi, C; Jonson, B N G; Woehr, A; Lesher, S R; Zuber, K T; Filippin, L; De witte, H J; Van den bergh, P A M; Raabe, R; Dirkx, D; Parnefjord gustafsson, F O A; Dunlop, R A; Tarasava, K; Gernhaeuser, R A; Weinzierl, W; Berger, C; Wendt, K; Achtzehn, T; Gottwald, T; Schug, M; Rossel, R E; Dominguez reyes, R R; Fraile prieto, L M; Briz monago, J A; Koester, U H; Bunce, M R; Bowry, M D; Nakhostin, M; Shearman, R; Cresswell, J R; Joss, D T; Gredley, A; Groombridge, D; Laird, A M; Aslanoglou, X; Siem, S; Weterings, J A; Renstrom, T; Szpak, B T; Luczkowski, M J; Ghita, D; Bezbakh, A; Soltz, R A; Bollmann, J; Bhattacharya, P; Roy, S; Rahaman, M A; Wlodarski, T; Carvalho soares, J; Barzakh, A; Schertz, F; Froemmgen, N E; Liberati, V; Foy, B E; Baptista barbosa, M; Weinheimer, C P; Zboril, M; Simon, R E; Popescu, L A; Czosnyka, T; Miranda jana, P A; Leimbach, D; Naskrecki, R; Plociennik, W A; Ruchowska, E E; Chiara, C J; Walters, W; Eberth, J H; Thomas, T; Thole, P; Queiser, M T; Lo bianco, G; D'amico, F; Muller, S; Sanchez alarcon, R M; Tain enriquez, J L; Orrigo, S E A; Orlandi, R; Masango, S; Plazaola muguruza, F C; Lepareur, N G; Fiebig, J M; Ceylan, N; Wildner, E; Kowalska, M; Malbrunot, S; Garcia ruiz, R F; Pallada, S; Slezak, M; Roeckl, E; Schrieder, G H; Ilieva, S K; Koenig, K L; Amoretti, M A; Lommen, J M; Fynbo, H O U; Weyer, G O P; Koldste, G T; Madsboll, K; Jensen, J H; Nieminen, A M; Reponen, M; Villari, A; Thomas, J; Saint-laurent, M; Sorlin, O H; Carniol, B; Pereira lopez, J; Grevy, S; Plaisir, C; Marie-jeanne, M J; Georgiev, G P; Etile, A M; Le blanc, F M; Verney, D; Stefan, G I; Assie, M; Suzuki, D; Guillot, J; Vazquez rodriguez, L; Campbell, P; Deacon, A N; Ware, T; Flueras, A; Xie, L; Banerjee, K; Piersa, M; Galaviz redondo, D; Johansson, H T; Schwarz, S; Toysa, A S; Aumont, J; Van duppen, P L E; Atanasov, D; Zadvornaya, A; Renaud, M A; Xu, Z; Garrett, P E; Rapisarda, E; Reber, J A; Mattolat, C F; Raeder, S; Habs, D; Vidal, M; Perez liva, M; Calvo portela, P; Ulla pedrera, F J; Wood, R T; Lalkovski, S; Page, R; Petri, M; Barton, C J; Nichols, A J; Vermeulen, M J; Bloor, D M; Henderson, J; Wilson, G L; De angelis, G; Buerger, A; Modamio hoybjor, V; Klintefjord, M L; Ingeberg, V W; Fornal, B A; Marginean, R; Sava, T; Kusoglu, A; Suvaila, R; Lica, R; Costache, C; Mihai, R; Ionescu, A; Baeck, T M; Hoffman, C R; Sedlak, M; Koskelo, O K; Kyaw myat, K M; Gladnishki, K A; Ganguly, B; Goncalves marques, J; Cardoso, S; Seliverstov, M; Niessen, B D; Gutt, L E; Chapman, R; Spagnoletti, P N; Lopes, C; De oliveira amorim, C; Batista lopes, C M; Araujo, J; Schielke, S J; Daugas, J R; Gaudefroy, L; Chevrier, R; Szunyogh, D M; Napiorkowski, P J; Wrzosek-lipska, K; Wahl, U; Catarino, N; Pereira carvalho alves de sequeira, M; Hess, H E; Holler, A; Bettermann, L; Geibel, K; Taprogge, J; Lewandowski, L T N; Manchado de sola, F; Cakirli mutlu, R B; Das gupta, S; Thulstrup, P W; Heinz, U; Nogwanya, T; Neidherr, D M; Morales lopez, A I; Gumenyuk, O; Peaker, A R; Wakabayashi, Y; Abrahams, K J; Martin montes, E J; Mach, H A; Souza ribeiro junior, I; He, J; Chalil, A; Xing, R; Dos santos augusto, R M; Giles, T J; Dorsival, A; Trujillo hernandez, J S; Kalaninova, Z; Andel, B; Venos, D; Kraemer, J; Saha, S; Neugart, R; Eronen, T O; Kreim, K D; Heck, M K; Goncharov, M; Karthein, J; Julin, R J; Eleon, C; Achouri, N L; Grinyer, G F; Fontbonne, C M; Alfaurt, P; Lynch, K M; Wilkins, S G; Brown, A R; Imai, N; Pomorski, M J; Janiak, L; Nilsson, T; Stroke, H H; Stanja, J; Dangelser, E; Heenen, P; Godefroid, M; Mallion, S N; Gins, W A M; Stegemann, S T; Koszorus, A; Mcnulty, J F; Lin, P; Ohlert, C M; Schwerdtfeger, W; Tengblad, O; Becerril reyes, A D; Perea martinez, A; Martinez perez, M C; Margerin, V; Rudigier, M; Alexander, T D; Patel, Z V; Hammond, N; Wearing, F; Patel, A; Jenkins, D G; Corradi, L; Galtarossa, F; Debernardi, A; Giacoppo, F; Tveten, G M; Malatji, K L; Krolas, W A; Stanoiu, M A; Rickert, E U; Ter-akopian, G; Cline, D; Riihimaeki, I A; Simon, K D; Wagner, F E; Turker, M; Neef, M H; Coombes, B J; Jakubek, J; Vagena, E; Bottoni, S; Nishimura, K; Correia, J; Rodrigues valdrez, C J; Molkanov, P; Adhikari, R; Ostrowski, A N; Hallmann, O; Scheck, M; Wady, P T; Lane, J; Krasznahorkay, A J; Kunne sohler, D; Meaney, A J; Hochschulz, F; Roig, O; Behan, C C; Kargoll, S; Kemnitz, S; Carvalho teixeira, R C; Redondo cubero, A; Tallarida, G; Kaczarowski, R; Finke, F; Linnemann, A; Altenkirch, R; Saed-samii, N; Ansari, S H; Dlamini, W B; Adoons, V N; Ronning, C R; Wiedeking, M; Herlert, A J; Mehl, C V; Judge, S M; Gaertner, D; Divinskyi, S; Karabasov, M O; Zagoraios, G; Boztosun, I; Van zyl, J J; Catherall, R; Lettry, J; Wenander, F J C; Zakoucky, D; Catchen, G L; Noertershaeuser, W; Kroell, T; Leske, J; Shubina, D; Murray, I M; Pancin, J; Delaunay, F; Poincheval, J J L; Audirac, L L; Gerbaux, M T; Aouadi, M; Sole, P G P; Fallot, M P; Onillon, A; Duchemin, C; Formento cavaier, R; Audi, G; Boukhari, A; Lau, C; Martin, J A; Barre, N H; Berry, T A; Procter, T J; Bladen, L K; Axiotis, M; Muto, S; Jeong, S C; Hirayama, Y; Korgul, A B; Minamisono, K; Bingham, C R; Aprahamian, A; Bucher, B M; Severijns, N; Huyse, M L; Ferrer garcia, R; Verlinde, M N S; Romano, N; Maugeri, E A; Klupp, S C; Dehn, M H; Heinke, R M; Naubereit, P; Maira vidal, A; Vedia fernandez, M V; Ibanez garcia, P B; Bruyneel, B J E; Materna, T; Hadynska-klek, K; Al-dahan, N; Alazemi, N; Carroll, R J; Babcock, C; Patronis, N; Eleme, Z; Dhal, A; Sahin, E; Goergen, A; Maj, A; Bednarczyk, P A; Borcea, C; Negoita, F; Suliman, G; Marginean, N M; Sotty, C O; Negret, A L; Nae, S A; Nita, C; Golubev, P I; Knyazev, A; Jost, C U; Petrik, K; Vaeyrynen, S A; Dracoulis, G D; Uher, J; Fernandez dominguez, B; Chakraborty, P; Avigo, R; Falahat, S; Lekovic, F; Dorrer, H J; Mengoni, D; Derkx, X; Angus, L J; Sandhu, K S; Gregor, E; Kelly, N A; Byrne, D J; Haas, H; Lourenco, A A; Sousa pereira, S M; Sousa, J B; De melo mendonca, T M; Tavares de sousa, C; Guerreiro dos santos oliveira custodio, L M; Da rocha rodrigues, P M; Yamaguchi, T; Thompson, P C; Rosenbusch, M; Wienholtz, F; Fischer, P; Iwanicki, J S; Rusek, K M; Hanstorp, D; Vetter, U; Wolak, J M; Park, S H; Warr, N V; Doornenbal, P C; Imig, A; Seidlitz, M; Moschner, K; Vogt, A; Kaya, L; Martel bravo, I; Orduz, A K; Serot, O; Majola, S N; Litvinov, Y; Bommert, M; Hensel, S; Markevich, V; Nishio, K; Ota, S; Matos, I; Zenkevich, A; Picado sandi, E; Forstner, O; Hu, B; Ntshangase, S S; Sanchez-segovia, J

    2002-01-01

    The experiments aim at a broad exploration of the properties of atomic nuclei far away from the region of beta stability. Furthermore, the unique radioactive beams of over 60~elements produced at the on-line isotope separators ISOLDE-2 and ISOLDE-3 are used in a wide programme of atomic, solid state and surface physics. Around 300 scientists are involved in the project, coming from about 70 laboratories. \\\\ \\\\ The electromagnetic isotope separators are connected on-line with their production targets in the extracted 600 MeV proton or 910~MeV Helium-3 beam of the Synchro-Cyclotron. Secondary beams of radioactive isotopes are available at the facility in intensities of 10$^1

  4. Civilsamfundets ABC: M for Marked

    DEFF Research Database (Denmark)

    Lund, Anker Brink; Meyer, Gitte

    2016-01-01

    Bogstaveligt talt: Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til M for Marked.......Bogstaveligt talt: Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til M for Marked....

  5. Marks on the petroleum fiscality

    International Nuclear Information System (INIS)

    2007-02-01

    This document offers some marks on the petroleum fiscality in France: the taxes as the 'accises' and the 'TVA', the part of the taxes in the sale price at the service station, the comparison with other countries of Europe, the tax revenues and the Government budget. It provides also marks on the fuels prices formation (margins), the world petroleum markets (supply and demand) and the part of the petroleum companies on the petroleum market. (A.L.B.)

  6. The Danish Air Quality Monitoring Programme

    DEFF Research Database (Denmark)

    Kemp, K.; Palmgren, F.; Manscher, O. H.

    The Danish Air Quality Monitoring Programme (LMP) was started in 1982 as the first nation-wide urban air pollution monitoring programme in Denmark. The programme has been adjusted to the pollution pattern by two revisions. The present phase (LMP III) was started in 1992. This report presents...... Copenhagen the same program is con-ducted as at the street stations with the inclusion of O3. Only NO, NO2 and O3 are reported from the other rural site. Air quality limit values have been implemented in Den-mark for NO2, SO2, TSP in order to protect human health. All limit values are based on EU limit...

  7. BWR Mark I pressure suppression study: bench mark experiments

    International Nuclear Information System (INIS)

    Lai, W.; McCauley, E.W.

    1977-01-01

    Computer simulations representative of the wetwell of Mark I BWR's have predicted pressures and related phenomena. However, calculational predictions for purposes of engineering decision will be possible only if the code can be verified, i.e., shown to compute in accord with measured values. Described in the report is a set of single downcomer spherical flask bench mark experiments designed to produce quantitative data to validate various air-water dynamic computations; the experiments were performed since relevant bench mark data were not available from outside sources. Secondary purposes of the study were to provide a test bed for the instrumentation and post-experiment data processing techniques to be used in the Laboratory's reactor safety research program and to provide additional masurements for the air-water scaling study

  8. Technology programme

    International Nuclear Information System (INIS)

    2007-01-01

    The technology activities carried out by the EURATOM-ENEA Association concern the continuation of the European Fusion Development Agreement (EFDA) as well as the ITER activities coordinated by the ITER International Office and Fusion for Energy. Also included in the activities are design and RD under the Broader Approach Agreement between the EU and Japan. In order to better contribute to the programme a number of consortium agreements among the Associations are being signed. Collaboration with industries in view of their participation in the construction of ITER was further strengthened, mainly in the field of magnet and divertor components. The new European Test Blanket Facility at ENEA Brasimone was completed; the design of the ITER radial neutron camera was optimised and the performance achievable with the in-vessel viewing system was further assessed by experimental trials. Design activities for the JT-60SA magnet and power supply system as well as the design and experimental activities related to the target of the International Fusion Materials Irradiation Facility were continued. Significant work was done to define quality assurance for neutronics analyses. Mockups of the ITER pre-compression ring made in glass fibre epoxy were tested. The activities and results documented in the following illustrate ENEA's efforts to support fusion development

  9. Mark Napier / Mark Napier ; interv. Tilman Baumgärtel

    Index Scriptorium Estoniae

    Napier, Mark

    2006-01-01

    Ameerika kunstnikust Mark Napierist (sünd. 1961) ja tema loomingust, 2001. a. tehtud meiliintervjuu kunstnikuga. Võrguteosest "The Digital Landfill" (1998), koos Andy Deckiga loodud tööst "GrafficJam" (1999), töödest "Shredder" (1998), "Feed", "Riot", "P-Soup" (2000), võrgukunstist ja muust

  10. Minimal Marking: A Success Story

    Directory of Open Access Journals (Sweden)

    Anne McNeilly

    2014-11-01

    Full Text Available The minimal-marking project conducted in Ryerson’s School of Journalism throughout 2012 and early 2013 resulted in significantly higher grammar scores in two first-year classes of minimally marked university students when compared to two traditionally marked classes. The “minimal-marking” concept (Haswell, 1983, which requires dramatically more student engagement, resulted in more successful learning outcomes for surface-level knowledge acquisition than the more traditional approach of “teacher-corrects-all.” Results suggest it would be effective, not just for grammar, punctuation, and word usage, the objective here, but for any material that requires rote-memory learning, such as the Associated Press or Canadian Press style rules used by news publications across North America.

  11. Percentage Retail Mark-Ups

    OpenAIRE

    Thomas von Ungern-Sternberg

    1999-01-01

    A common assumption in the literature on the double marginalization problem is that the retailer can set his mark-up only in the second stage of the game after the producer has moved. To the extent that the sequence of moves is designed to reflect the relative bargaining power of the two parties it is just as plausible to let the retailer move first. Furthermore, retailers frequently calculate their selling prices by adding a percentage mark-up to their wholesale prices. This allows a retaile...

  12. Academic programme satisfaction and doctorate aspiration among ...

    African Journals Online (AJOL)

    The number of doctorates in Nigerian universities is grossly below the bench mark. Among the obvious reasons for this unhealthy situation in the universities is about holders of the apex degree. They are in short supply. This study fundamentally examined mentoring experience as antecedent of academic programme ...

  13. Prosodic Focus Marking in Bai.

    NARCIS (Netherlands)

    Liu, Zenghui; Chen, A.; Van de Velde, Hans

    2014-01-01

    This study investigates prosodic marking of focus in Bai, a Sino-Tibetan language spoken in the Southwest of China, by adopting a semi-spontaneous experimental approach. Our data show that Bai speakers increase the duration of the focused constituent and reduce the duration of the post-focus

  14. Better marking means cheaper pruning.

    Science.gov (United States)

    Kenneth R. Eversole

    1953-01-01

    Careful selection of trees to be pruned can make the difference between profit and loss on the pruning investment, especially in stands where no thinning is contemplated. Expert marking is required to make sure that the pruned trees will grow rapidly. The most important variable influencing the cost of clear wood produced by pruning is growth rate. For example, at 3...

  15. Laser marking method and device

    International Nuclear Information System (INIS)

    Okazaki, Yuki; Aoki, Nobutada; Mukai, Narihiko; Sano, Yuji; Yamamoto, Seiji.

    1997-01-01

    An object is disposed in laser beam permeating liquid or gaseous medium. Laser beams such as CW laser or pulse laser oscillated from a laser device are emitted to the object to apply laser markings with less degradation of identification and excellent corrosion resistance on the surface of the object simply and easily. Upon applying the laser markings, a liquid or gas as a laser beam permeating medium is blown onto the surface of the object, or the liquid or gas in the vicinity of the object is sucked, the laser beam-irradiated portion on the surface can be cooled positively. Accordingly, the laser marking can be formed on the surface of the object with less heat affection to the object. In addition, if the content of a nitrogen gas in the laser beam permeating liquid medium is reduced by degassing to lower than a predetermined value, or the laser beam permeating gaseous medium is formed by an inert gas, a laser marking having high corrosion resistance and reliability can be formed on the surface of the objective member. (N.H.)

  16. National programme: Finland

    International Nuclear Information System (INIS)

    Forsten, J.

    1986-01-01

    Finland's programmes in the field of reactor pressure components are presented in this paper. The following information on each of these programmes is given: the brief description of the programme; the programme's schedule and duration; the name of the project manager

  17. Automated road marking recognition system

    Science.gov (United States)

    Ziyatdinov, R. R.; Shigabiev, R. R.; Talipov, D. N.

    2017-09-01

    Development of the automated road marking recognition systems in existing and future vehicles control systems is an urgent task. One way to implement such systems is the use of neural networks. To test the possibility of using neural network software has been developed with the use of a single-layer perceptron. The resulting system based on neural network has successfully coped with the task both when driving in the daytime and at night.

  18. Mark Twain: inocente ou pecador? = Mark Twain: innocent or sinner?

    Directory of Open Access Journals (Sweden)

    Heloisa Helou Doca

    2009-01-01

    Full Text Available A leitura cuidadosa do texto do “Tratado de Paris”, em 1900, leva Mark Twain a concluir que a intenção política norte-americana era, claramente, a de subjugação. Declara-se, abertamente, antiimperialista, nesse momento, apesar das inúmeras críticasrecebidas por antagonistas políticos que defendiam o establishment dos Estados Unidos. Após viajar para a Europa e Oriente, em 1867, como correspondente do jornal Daily Alta Califórnia, Mark Twain publica, em 1869, seu relato de viagem, The Innocents Abroad or TheNew Pilgrim’s Progress. Nosso estudo demonstra que o autor, apesar das diversas máscaras usadas em seus relatos, narra histórias, culturas e tradições, tanto da Europa quanto do Oriente, já com os olhos bem abertos pelo viés antiimperialista. Faz uso da paródia, sátira, ironia e humor para dessacralizar impérios, monarcas e a Igreja que subjugavam os mais fracos, iluminando, desde então, os estudos sobre culturas. Nosso estudo, outrossim, faz uma reflexão sobre cultura, tradição e o olhar do viajante, justificando o “olhar inocente” do narrador em seu relato.After carefully reading the Treaty of Paris in 1900, Mark Twain concluded that the goal of U.S. policy was clearly one ofsubjugation. He openly declared himself an anti-imperialist at that time, in spite of the numerous criticisms he received from political opponents who supported the United States status quo. After traveling to Europe and the East in 1867 as a correspondent for The DailyAlta California newspaper, Mark Twain published his travel report, The Innocents Abroad or The New Pilgrim’s Progress in 1869. Our study demonstrates that the author, in spite of using different guises in his reports, narrated histories, cultures and traditions – from both Europe and the East – with a viewpoint already imbued by his anti-imperialistic ideals. Twain made use of parody, satire, irony and humor within his texts in order to desecrate empires,monarchs and

  19. Recent results for Mark III

    International Nuclear Information System (INIS)

    Brient, J.C.

    1987-12-01

    This paper presents recent results from the Mark III detector at SPEAR, in the open charm sector. The first topic discussed is the reanalysis of the direct measurement of the D hadronic branching fractions, where a detailed study has been made of the Cabibbo suppressed and multi-π 0 's D decays backgrounds in the double tag sample. Next, the Dalitz plot analysis of the D decays to Kππ is presented, leading to the relative fractions of three-body versus pseudoscalarvector decays. 7 refs., 5 figs

  20. The Mark III vertex chamber

    International Nuclear Information System (INIS)

    Adler, J.; Bolton, T.; Bunnell, K.

    1987-07-01

    The design and construction of the new Mark III vertex chamber is described. Initial tests with cosmic rays prove the ability of track reconstruction and yield triplet resolutions below 50 μm at 3 atm using argon/ethane (50:50). Also performed are studies using a prototype of a pressurized wire vertex chamber with 8 mm diameter straw geometry. Spatial resolution of 35mm was obtained using dimethyl ether (DME) at 1 atm and 30 μm using argon/ethane (50/50 mixture) at 4 atm. Preliminary studies indicate the DME to adversely affect such materials as aluminized Mylar and Delrin

  1. 46 CFR 185.602 - Hull markings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Hull markings. 185.602 Section 185.602 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) OPERATIONS Markings Required § 185.602 Hull markings. (a) Each vessel must be marked as required by part 67...

  2. 27 CFR 28.193 - Export marks.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.193... Drawback Filing of Notice and Removal § 28.193 Export marks. In addition to the marks and brands required... chapter, the exporter shall mark the word “Export” on the Government side of each case or Government head...

  3. 27 CFR 28.103 - Export marks.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.103... Manufacturing Bonded Warehouse § 28.103 Export marks. (a) General. In addition to the marks and brands required... provisions of part 19 of this chapter, the proprietor shall mark the word “Export” on the Government side of...

  4. 27 CFR 28.144 - Export marks.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.144... § 28.144 Export marks. (a) General Requirement. In addition to the marks and brands required to be... brewer shall mark the word “Export” on each container or case of beer, or the words “Beer concentrate for...

  5. 27 CFR 28.154 - Export marks.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.154..., for Exportation or Transfer to a Foreign-Trade Zone § 28.154 Export marks. In addition to the marks... provisions of part 19 of this chapter, the proprietor shall mark the word “Export” on the Government side of...

  6. Unexpected marked seizure improvement in paediatric epilepsy surgery candidates

    DEFF Research Database (Denmark)

    Hoei-Hansen, Christina E; Mathiasen, René; Uldall, Peter

    2017-01-01

    PURPOSE: Epilepsy surgery is performed based on the assumption that medical refractory epilepsy will continue. Rarely seizure freedom occurs before surgery is performed, while the patient is being evaluated as an epilepsy surgery candidate. The aim of this study was to describe the number...... of children withdrawn from an epilepsy surgery programme due to unexpected seizure improvement. METHODS: We retrospectively studied 173 children under 18 years with medical refractory epilepsy referred for epilepsy surgery between 1996 and 2010. Medical records were reviewed in 2012 and 2015. RESULTS......: At the first evaluation point in 2012, 13 patients were withdrawn from the epilepsy surgery programme due to unexpected marked improvement. In 2015, 6 of them were still seizure free. They had unexpected seizure freedom due to change in AED treatment (n=3) or after a febrile episode (n=3). The mean number...

  7. Ghana's nuclear programme

    International Nuclear Information System (INIS)

    Ahafia, Albert K.

    1988-01-01

    The Paper gives the purpose of Ghana's Nuclear Programme and describes some specific research activities and peaceful applications of atomic energy in agriculture, medicine and industry. A discussion of some of the problem facing the programme concludes the Paper. (author)

  8. The Winfrith DSN programme

    International Nuclear Information System (INIS)

    Francescon, S.

    1963-05-01

    The programme, which is written in the Fortran language, solves the Carlson discrete S n approximation to the Boltzmann transport equation in cylindrical geometry. This report describes the input and output facilities of the WINFRITH DSN programme and the associated editing programme WED. (author)

  9. The Winfrith DSN programme

    Energy Technology Data Exchange (ETDEWEB)

    Francescon, S [General Reactor Physics Division, Atomic Energy Establishment, Winfrith, Dorchester, Dorset (United Kingdom)

    1963-05-15

    The programme, which is written in the Fortran language, solves the Carlson discrete S{sub n} approximation to the Boltzmann transport equation in cylindrical geometry. This report describes the input and output facilities of the WINFRITH DSN programme and the associated editing programme WED. (author)

  10. UNESCO's Ethics Education Programme.

    NARCIS (Netherlands)

    Have, H.A.M.J. ten

    2008-01-01

    Unesco initiated the Ethics Education Programme in 2004 at the request of member states to reinforce and increase the capacities in the area of ethics teaching. The programme is focused on providing detailed information about existing teaching programmes. It also develops and promotes teaching

  11. Dialectica Interpretation with Marked Counterexamples

    Directory of Open Access Journals (Sweden)

    Trifon Trifonov

    2011-01-01

    Full Text Available Goedel's functional "Dialectica" interpretation can be used to extract functional programs from non-constructive proofs in arithmetic by employing two sorts of higher-order witnessing terms: positive realisers and negative counterexamples. In the original interpretation decidability of atoms is required to compute the correct counterexample from a set of candidates. When combined with recursion, this choice needs to be made for every step in the extracted program, however, in some special cases the decision on negative witnesses can be calculated only once. We present a variant of the interpretation in which the time complexity of extracted programs can be improved by marking the chosen witness and thus avoiding recomputation. The achieved effect is similar to using an abortive control operator to interpret computational content of non-constructive principles.

  12. Cavernous hemangioma presenting marked hyperostosis

    International Nuclear Information System (INIS)

    Kobata, Hitoshi; Miyake, Hiroji; Kitamura, Junji; Kajikawa, Hiroshi; Ohta, Tomio

    1988-01-01

    The authors report here a case of hemangioma of the left parietal bone which presented headache and papilledema. This patient is a 37-year-old female who had, prior to admission, complained of increasing headache for one year and blurred vision for three months. She had no history of head injury. Local physical examinations revealed a slight bulging in her left parietal region which was insensitive to palpation and not adherent to the overlying scalp. Neurological examinations revealed bilateral papilledema and an incongruous bitemporal upper quadrant defect in the visual field. All the other neurological and laboratory data were normal. A plain skull roentogenogram showed a 9 x 9 cm osteolytic and characteristic honeycomb lesion in the parietal region. Systemic bone survey revealed a similar lesion in the right tibia which was not histologically examined. A marked accumulation of isotopes was detected on the bone scintigrams at both lesions. Selective external carotid angiograms demonstrated a tumor stain fed by the superficial temporal, occipital, and middle meningial arteries. CT scans of the brain and skull clearly showed a local thickening of and structural changes in the skull bone and also a mass effect on the brain and lateral ventricle. The lesioned bone was removed en bloc and replaced by an artificial bone. It was highly vascular, but not adherent to the overlying dura. The post-operative course was uneventful, and the headache and papilledema disappeared. Hemangioma of the skull presenting marked hyperostosis, as reported above, seems to be rare. In addition, in this case, skeletal angioma without any clinical manifestation was detected. Clinical and radiological pictures of the hemangioma of the skull and other bones were briefly discussed. (author)

  13. Swiss breeder research programme

    International Nuclear Information System (INIS)

    1992-01-01

    to find a sound base for the financial support. For the reactor physics research two almost parallel activities were considered. During the first period mainly existing know-how will be applied and a step by step familiarisation with the significance of fast breeder reactor physics is foreseen. New pointwise and group-wise cross section libraries based on ENDFIB-VI and JEF 1.1 have been prepared. A large (1250 MWe) sodium-cooled fast breeder reactor benchmark problem was calculated and the eigenvalues, isothermal core fuel Doppler-reactivities, effective delayed neutron fraction and reactivity worths were compared with a great number of solutions obtained in the past. During the following period new methods and models to calculate burnup-cycles of large breeder reactors should be developed and tested. Data libraries for shielding problems to be used in the ECCO code will be prepared and shielding problems calculated. The thermal hydraulics research is conducted to investigate the flow structures produced by two parallel layers of liquid at different velocities and temperatures. This problem arises particularly on occasions where natural circulation is prevailing and hot and cold streams of liquid come together. At present, tests are carried out with water in an horizontal glass channel (WAMIX). Two flow visualization techniques are being used: laser-sheet induced luminescence and image-analysis of video pictures taken with ink injection marking. Based on the image analysis a determination of the frequency of appearance of vortices (time-dependence) could be made. In the analytical area the computational thermal hydraulics code ASTEC was further validated by participation in an international benchmark calculation exercise. This code is also used to calculate the velocity profiles in the boundary layer of the inlet segment of the WAMIX test section. It is intended to directly participate in the European and the French R and D programmes for sodium-cooled fast breeder

  14. Cooperative Shark Mark Recapture Database (MRDBS)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Shark Mark Recapture Database is a Cooperative Research Program database system used to keep multispecies mark-recapture information in a common format for...

  15. On-road Bicycle Pavement Markings

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — A mile by mile breakdown of the on-street bicycle pavement markings installed within the City of Pittsburgh. These include bike lanes, shared lane markings...

  16. Serviceable pavement marking retroreflectivity levels : technical report.

    Science.gov (United States)

    2009-03-01

    This research addressed an array of issues related to measuring pavement markings retroreflectivity, factors : related to pavement marking performance, subjective evaluation process, best practices for using mobile : retroreflectometers, sampling pav...

  17. [Marked hemosiderosis in myelodysplastic syndrome].

    Science.gov (United States)

    Klinz, C

    1999-01-29

    A 68-year-old man was admitted because of symptoms of lumbar pain. He was known to have chronic anemia with ring sideroblasts and diabetes melitus and to be in heart failure. Three months before he had been given 7 units of red cell concentrate. On admission the outstanding features were brown discoloration of the skin, absent body hair, tachycardia, hepatomegaly and small testicles. He had a normocytic anemia, hyperglycemia and raised transaminases, hypogonadism and vitamin D3 deficiency. The serum levels of iron, transferrin saturation and feritin were markedly elevated. Liver iron content/g dried liver was 4.2 g (by biomagnetometer). Radiology of the lumbar vertebrae showed osteoporosis and sonography confirmed hepatomegaly. The known myelodysplastic syndrome (MDS) had fed to secondary hemosiderosis with heart failure, liver involvement, diabetes mellitus, hypogonadism and osteoporosis. Symptomatic treatment was unsuccessfully complemented by desferoxamine (up to 4 g/12 h) to release iron. But very good iron excretion was then achieved with deferiprone (3 x 1 g/d). The patient later died of the sequelae of hemosiderosis. Even when they have not required transfusions, patients with long-standing MDS should be examined regularly for the possible development of secondary hemosiderosis so that iron-chelating agents can be administered as needed.

  18. EDMS - Reaching the Million Mark

    CERN Multimedia

    2009-01-01

    When Christophe Seith from the company Cegelec sat down to work on 14 May 2009 at 10:09 a.m. to create the EDMS document entitled "Rapport tournée PH semaine 20", little did he know that he would be the proud creator of the millionth EDMS document and the happy prize winner of a celebratory bottle of champagne to mark the occasion. In the run up to the creation of the millionth EDMS document the EDMS team had been closely monitoring the steady rise in the EDMS number generator, so as to ensure the switch from the six figured i.d. to seven figures would run smoothly and of course, to be able to congratulate the creator of the millionth EDMS document. From left to right: Stephan Petit (GS-ASE- EDS Section Leader), Christophe Delamare (GS- ASE Group Leader), Christophe Seith, creator of the millionth EDMS document, David Widegren, (GS-ASE- EPS Section Leader). The millionth EDMS document. For t...

  19. UKAEA underlying research programme annual report

    International Nuclear Information System (INIS)

    Moon, D.P.

    1990-01-01

    Investment in fundamental research is essential to the success of an organisation such as Atomic Energy Authority (AEA) Technology whose business is the selling of Research and Development (R and D) and the services relating to it. Such research supplies the scientific understanding that underpins the technical expertise of the organisation, develops new skills and techniques, and stimulates technical innovation. The resulting scientific and technical excellence is the hall-mark of a major contract R and D organisation. Fundamental research in the AEA is co-ordinated through the Underlying Research Programme. This Report describes progress made during the financial year 1988/89 within all Technical Areas of the Programme, and additionally summarises the AEA's Underlying Research on the Safe Integral Reactor design and on 'Cold Fusion'. Highlights of recent technical achievements within the Programme are described in a separate brochure. (author)

  20. 46 CFR 122.602 - Hull markings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Hull markings. 122.602 Section 122.602 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150....602 Hull markings. (a) Each vessel must be marked as required by part 67, subpart I, of this chapter...

  1. 7 CFR 160.32 - Marking containers.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Marking containers. 160.32 Section 160.32 Agriculture... STANDARDS FOR NAVAL STORES Analysis, Inspection, and Grading on Request § 160.32 Marking containers. The interested person shall provide any labor necessary for marking the containers, after the contents have been...

  2. 46 CFR 160.176-23 - Marking.

    Science.gov (United States)

    2010-10-01

    ... of the vessel. (2) The type of vessel. (3) Specific purpose or limitation approved by the Coast Guard...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Inflatable Lifejackets § 160.176-23 Marking. (a) General. Each inflatable lifejacket must be marked with the information required by this section. Each marking must be...

  3. 27 CFR 28.123 - Export marks.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.123..., or Transportation to a Manufacturing Bonded Warehouse § 28.123 Export marks. (a) General. In addition... filled under the provisions of part 24 of this chapter, the proprietor shall mark the word “Export” on...

  4. 27 CFR 28.223 - Export marks.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.223... Export marks. In addition to the marks and brands required to be placed on kegs, barrels, cases, crates... “Export” on each container or case before removal for export, for use on vessels or aircraft, or for...

  5. Research programme on radioactive wastes

    International Nuclear Information System (INIS)

    Eckhardt, A.; Hufschmid, P.; Jordi, S.; Schanne, M.; Vigfusson, J.

    2009-11-01

    This report for the Swiss Federal Department of the Environment, Transport, Energy and Communication (DETEC) takes a look at work done within the framework of the research programme on radioactive wastes. The paper discusses the development of various projects and the associated organisations involved. Both long-term and short-term topics are examined. The long-term aspects of handling radioactive wastes include organisation and financing as well as the preservation of know-how and concepts for marking the repositories. Communication with the general public on the matter is looked at along with public perception, opinion-making and acceptance. Waste storage concepts are looked at in detail and aspects such as environmental protection, monitoring concepts, retrievability and encasement materials are discussed. Finally, ethical and legal aspects of radioactive waste repositories are examined. The paper is completed with appendixes dealing with planning, co-ordination and the responsibilities involved

  6. Finnish bioenergy research programme

    Energy Technology Data Exchange (ETDEWEB)

    Asplund, D. [VTT Energy, Jyvaeskylae (Finland)

    1996-12-31

    Finland is a leading country in the use of biofuels and has excellent opportunities to increase the use of biofuels by up to 25-30 %. The Finnish Government has set an objective for the promotion of bioenergy. The aim is to increase the use of bioenergy by about 25 % from the present level by 2005, and the increment corresponds to 1.5 million tonnes of oil equivalent (toe) per year. The R and D work has been considered as an important factor to achieve this ambitious goal. Energy research was organised into a series of research programmes in 1988 in accordance with the proposal of Finnish Energy Research Committee. The object of the research programmes is to enhance research activities and to bundle individual projects together into larger research packages. The common target of the Finnish energy research programmes is to proceed from basic and applied research to product development and pilot operation, and after that to the first commercial applications, e.g. demonstrations. As the organisation of energy research to programmes has led to good results, the Finnish Ministry of Trade and Industry decided to go on with this practice by launching new six-year programmes in 1993-1998. One of these programmes is the Bioenergy Research Programme and the co-ordination of this programme is carried out by VTT Energy. Besides VTT Energy the Finnish Forest Research Institute, Work Efficiency Institute, Metsaeteho and University of Joensuu are participating in the programme 7 refs.

  7. Finnish bioenergy research programme

    Energy Technology Data Exchange (ETDEWEB)

    Asplund, D [VTT Energy, Jyvaeskylae (Finland)

    1997-12-31

    Finland is a leading country in the use of biofuels and has excellent opportunities to increase the use of biofuels by up to 25-30 %. The Finnish Government has set an objective for the promotion of bioenergy. The aim is to increase the use of bioenergy by about 25 % from the present level by 2005, and the increment corresponds to 1.5 million tonnes of oil equivalent (toe) per year. The R and D work has been considered as an important factor to achieve this ambitious goal. Energy research was organised into a series of research programmes in 1988 in accordance with the proposal of Finnish Energy Research Committee. The object of the research programmes is to enhance research activities and to bundle individual projects together into larger research packages. The common target of the Finnish energy research programmes is to proceed from basic and applied research to product development and pilot operation, and after that to the first commercial applications, e.g. demonstrations. As the organisation of energy research to programmes has led to good results, the Finnish Ministry of Trade and Industry decided to go on with this practice by launching new six-year programmes in 1993-1998. One of these programmes is the Bioenergy Research Programme and the co-ordination of this programme is carried out by VTT Energy. Besides VTT Energy the Finnish Forest Research Institute, Work Efficiency Institute, Metsaeteho and University of Joensuu are participating in the programme 7 refs.

  8. High contrast laser marking of alumina

    International Nuclear Information System (INIS)

    Penide, J.; Quintero, F.; Riveiro, A.; Fernández, A.; Val, J. del; Comesaña, R.; Lusquiños, F.; Pou, J.

    2015-01-01

    Highlights: • Laser marking of alumina using near infrared (NIR) lasers was experimentally analyzed. • Color change produced by NIR lasers is due to thermally induced oxygen vacancies. • Laser marking results obtained using NIR lasers and green laser are compared. • High contrast marks on alumina were achieved. - Abstract: Alumina serves as raw material for a broad range of advanced ceramic products. These elements should usually be identified by some characters or symbols printed directly on them. In this sense, laser marking is an efficient, reliable and widely implemented process in industry. However, laser marking of alumina still leads to poor results since the process is not able to produce a dark mark, yielding bad contrast. In this paper, we present an experimental study on the process of marking alumina by three different lasers working in two wavelengths: 1064 nm (Near-infrared) and 532 nm (visible, green radiation). A colorimetric analysis has been carried out in order to compare the resulting marks and its contrast. The most suitable laser operating conditions were also defined and are reported here. Moreover, the physical process of marking by NIR lasers is discussed in detail. Field Emission Scanning Electron Microscopy, High Resolution Transmission Electron Microscopy and X-ray Photoelectron Spectroscopy were also employed to analyze the results. Finally, we propose an explanation for the differences of the coloration induced under different atmospheres and laser parameters. We concluded that the atmosphere is the key parameter, being the inert one the best choice to produce the darkest marks

  9. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1984-04-01

    KfK participates to the Fusion Technology Programme of the European Community. Most of the work in progress addresses the Next European Torus (NET) and the long term technology aspects as defined in the 82/86 programme. A minor part serves to preparation of future contributions and to design studies on fusion concepts in a wider perspective. The Fusion Technology Programme of Euratom covers mainly aspects of nuclear engineering. Plasma engineering, heating, refueling and vacuum technology are at present part of the Physics Programme. In view of NET, integration of the different areas of work will be mandatory. KfK is therefore prepared to address technical aspects beyond the actual scope of the physics experiments. The technology tasks are reported project wise under title and code of the Euratom programme. Most of the projects described here are shared with other European fusion laboratories as indicated in the table annexed to this report. (orig./GG)

  10. Mark II magnetic detector for SPEAR

    International Nuclear Information System (INIS)

    Larsen, R.R.

    1975-01-01

    The Mark II Detector, presently in the design stage, is a SLAC/LBL detector project to replace the Mark I now in operation at SPEAR. While similar in concept to the Mark I it will have improved momentum resolution, shower detection, solid angle coverage for both triggering and tracking and a magnet design providing easier access to those particles transmitted through the aluminum coil

  11. An analysis of hospital brand mark clusters.

    Science.gov (United States)

    Vollmers, Stacy M; Miller, Darryl W; Kilic, Ozcan

    2010-07-01

    This study analyzed brand mark clusters (i.e., various types of brand marks displayed in combination) used by hospitals in the United States. The brand marks were assessed against several normative criteria for creating brand marks that are memorable and that elicit positive affect. Overall, results show a reasonably high level of adherence to many of these normative criteria. Many of the clusters exhibited pictorial elements that reflected benefits and that were conceptually consistent with the verbal content of the cluster. Also, many clusters featured icons that were balanced and moderately complex. However, only a few contained interactive imagery or taglines communicating benefits.

  12. Optical programmable metamaterials

    Science.gov (United States)

    Gong, Cheng; Zhang, Nan; Dai, Zijie; Liu, Weiwei

    2018-02-01

    We suggest and demonstrate the concept of optical programmable metamaterials which can configure the device's electromagnetic parameters by the programmable optical stimuli. In such metamaterials, the optical stimuli produced by a FPGA controlled light emitting diode array can switch or combine the resonance modes which are coupled in. As an example, an optical programmable metamaterial terahertz absorber is proposed. Each cell of the absorber integrates four meta-rings (asymmetric 1/4 rings) with photo-resistors connecting the critical gaps. The principle and design of the metamaterials are illustrated and the simulation results demonstrate the functionalities for programming the metamaterial absorber to change its bandwidth and resonance frequency.

  13. NNP Life Management Programmes

    International Nuclear Information System (INIS)

    Hervia Ruperez, F.

    1996-01-01

    Around the world, power station owners are increasingly concerned to optimise Plant Life Management. In response, they are setting up Life Management programmes, of more or less ambitious scope and depth. Strategic, economic and security concerns and the close link between life extension work and the improved maintenance practices that are so important today, will increase and global these programmes for monitoring and conservation or mitigation of ageing. These programmes are all based on knowledge of the precise condition of all components and population with the greatest effect on the economics and safety of the plant, and trends in changes in their condition. (Author)

  14. The European Fusion Programme

    International Nuclear Information System (INIS)

    Palumbo, D.

    1983-01-01

    The European Fusion Programme is coordinated by Euratom and represents a long term cooperative project of Member States of the European Communities in the field of fusion, designed to lead to the joint construction of prototypes. The main lines of the programme proposed for 1982 to 1986 are: (1) the continuation of a strong effort on tokamaks with emphasis on JET construction, operation and upgrading, (2) conceptual design of NET and development of the related technology, and (3) further work on two alternative magnetic confinement systems. The current status and future plans for this programme are discussed in the paper. (author)

  15. 49 CFR 1520.13 - Marking SSI.

    Science.gov (United States)

    2010-10-01

    ... SECURITY INFORMATION § 1520.13 Marking SSI. (a) Marking of paper records. In the case of paper records... back cover, including a binder cover or folder, if the document has a front and back cover; (2) Any.... 552 and 49 CFR parts 15 and 1520. (d) Other types of records. In the case of non-paper records that...

  16. Lessons learned : pavement marking warranty contract.

    Science.gov (United States)

    2013-12-01

    In 2012, UDOT implemented a performance-based warranty on a portion of an I-15 pavement marking : project. The awarded contract requested a contractor warranty on the implemented markings for a total : duration of six years. This is the first time th...

  17. 49 CFR 178.338-18 - Marking.

    Science.gov (United States)

    2010-10-01

    ... pounds. (7) Maximum design density of lading (Max. Lading density), in pounds per gallon. (8) Material... cryogenic liquid, in hours, and the name of that cryogenic liquid (MRHT __ hrs, name of cryogenic liquid). Marked rated holding marking for additional cryogenic liquids may be displayed on or adjacent to the...

  18. 25 CFR 141.16 - Price marking.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Price marking. 141.16 Section 141.16 Indians BUREAU OF... AND ZUNI RESERVATIONS General Business Practices § 141.16 Price marking. The price of each article... visible to the customer and that affords the customer a reasonable opportunity to learn the price of the...

  19. Do employers prefer Mark over Mohammed?

    NARCIS (Netherlands)

    Iris Andriessen; Eline Nievers; Laila Faulk; Jaco Dagevos

    2010-01-01

    Original title: Liever Mark dan Mohammed? Does Mohammed have less chance of succeeding on the Dutch labour market than Mark, even though they both have the same qualifications and work experience? And are employers less friendly towards Sonaya than Paula? This study investigates the

  20. 7 CFR 956.162 - Container markings.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container markings. 956.162 Section 956.162... WALLA VALLEY OF SOUTHEAST WASHINGTON AND NORTHEAST OREGON Rules and Regulations § 956.162 Container markings. Effective April 15, 1997, no handler shall ship any container of Walla Walla Sweet Onions except...

  1. Fellows, Associates & Students Programmes

    CERN Document Server

    2005-01-01

    The present document reviews the CERN Fellows, Associates and Students Programmes emphasizing the developments since 2000, when the previous review was presented to the Scientific Policy Committee, Finance Committee and Council (CERN/2325), and makes proposals for the coming five years. In summary, it is proposed to â?¢ Simplify the payment scheme for the Paid Scientific Associates Programme, which will no longer depend on candidateâ??s home support and age; â?¢ Broaden the scope of the Fellowship Programme, in order to facilitate the recruitment of young graduates in computing and engineering. Age-related eligibility conditions and payment levels will be replaced with experience-based criteria; â?¢ Modify subsistence rates for the Doctoral and Technical Student Programme in order to harmonize CERNâ??s payment levels with those offered by other research establishments. This document is presented for discussion and recommendation by the Scientific Policy Committee and approval by the Council. Additiona...

  2. (ARV) treatment training programme

    African Journals Online (AJOL)

    Winnie

    Keywords:ARV, training, evaluation, HIV, health care provider. RÉSUMÉ .... workers, adequate laboratory facilities for measuring viral load and .... questionnaire guide, the head of unit of the ART ...... begins its scale-up programme. Some of ...

  3. The French nuclear programme

    International Nuclear Information System (INIS)

    Bacher, Pierre

    1987-01-01

    France has a civil nuclear power generation programme second only to the USA with 49 nuclear units in operation and 13 under construction. The units in service are described. These include 33 PWR 900 MW and 9 PWR 1300 MW units. The electricity consumption and generation in France is illustrated. The absence of a powerful anti-nuclear lobby and two main technical options have contributed to the success of the French nuclear programme. These are the PWR design and the plant standardization policy which allows the setting up of an effective industrial complex (eg for analysis of operating conditions and of safety and reliability information). The programme and the reasons for its success are reviewed. Research programmes and future plans are also discussed. (UK)

  4. Elukestva õppe programm : Erasmus+

    Index Scriptorium Estoniae

    2014-01-01

    Erasmus+ programm liidab senised koostööprogrammid „Euroopa elukestva õppe programm“, „Euroopa Noored“ ning Euroopa komisjoni rahvusvahelised kõrgharidusprogrammid. Elukestva õppe programmi 2013 kokkuvõte

  5. Greek Teachers Programme 2015

    CERN Multimedia

    Hoch, Michael

    2015-01-01

    The 3rd edition of this year's Greek Teachers Programme was co-organized by CERN Education Group and the Hellenic Physical Society and took place from 8 to 12 November 2015. The programme targets physics high-school teachers from all over Greece. It aims to help teachers inspire the next generation of scientists and engineers by motivating their students to understand and appreciate how science works at the world's largest physics laboratory, whereby increasing their interest in pursuing studies in STEM fields in secondary and post-secondary education. 33 teachers took part in this programme which comprised lectures by Greek members of the CERN scientific community, with visits to experimental facilities, hands-on activities and dedicated sessions on effective and creative ways through which participants may bring physics, particle physics and CERN closer to their school classroom. In 2015, more than 100 teachers took part in the three editions of the Greek Teachers Programme.

  6. The French energy programme

    International Nuclear Information System (INIS)

    Bohnen, U.

    1980-01-01

    The challenge of the oil crisis made French energy policy react chiefly by means of a programme for the rapid expansion of nuclear energy which has become unparalleled because of its systematic realization. The following article gives a survey of this programme and its political preconditions. The French energy programme deserves special attention as the utilization of nuclear energy in France including all related activities has reached a more advanced stage than in most other countries. The effects and requirements connected with such an extensive programme which can therefore be investigated with the help of the French example migth be of importance also for other countries in a similar way. (orig./UA) [de

  7. The Gold Standard Programme

    DEFF Research Database (Denmark)

    Neumann, Tim; Rasmussen, Mette; Ghith, Nermin

    2013-01-01

    To evaluate the real-life effect of an evidence-based Gold Standard Programme (GSP) for smoking cessation interventions in disadvantaged patients and to identify modifiable factors that consistently produce the highest abstinence rates.......To evaluate the real-life effect of an evidence-based Gold Standard Programme (GSP) for smoking cessation interventions in disadvantaged patients and to identify modifiable factors that consistently produce the highest abstinence rates....

  8. Motivation programmes of organizations

    OpenAIRE

    Pízová, Tereza

    2008-01-01

    The Bachelor Thesis "'Motivation Programmes of Organizations" focuses on an extremely important area within personnel management. Employee motivation is crucial to the effective operation of businesses. Motivation programmes assist in increasing and maintaining employee motivation and demonstrate an organization's interest in its employees. This piece is on one hand concerned with theoretical foundations of motivation, describing theories and concepts important to the area of human behaviour ...

  9. High contrast laser marking of alumina

    Science.gov (United States)

    Penide, J.; Quintero, F.; Riveiro, A.; Fernández, A.; del Val, J.; Comesaña, R.; Lusquiños, F.; Pou, J.

    2015-05-01

    Alumina serves as raw material for a broad range of advanced ceramic products. These elements should usually be identified by some characters or symbols printed directly on them. In this sense, laser marking is an efficient, reliable and widely implemented process in industry. However, laser marking of alumina still leads to poor results since the process is not able to produce a dark mark, yielding bad contrast. In this paper, we present an experimental study on the process of marking alumina by three different lasers working in two wavelengths: 1064 nm (Near-infrared) and 532 nm (visible, green radiation). A colorimetric analysis has been carried out in order to compare the resulting marks and its contrast. The most suitable laser operating conditions were also defined and are reported here. Moreover, the physical process of marking by NIR lasers is discussed in detail. Field Emission Scanning Electron Microscopy, High Resolution Transmission Electron Microscopy and X-ray Photoelectron Spectroscopy were also employed to analyze the results. Finally, we propose an explanation for the differences of the coloration induced under different atmospheres and laser parameters. We concluded that the atmosphere is the key parameter, being the inert one the best choice to produce the darkest marks.

  10. Court presentation of bite mark evidence.

    Science.gov (United States)

    Drinnan, A J; Melton, M J

    1985-12-01

    The uniqueness of an individual's bite mark is generally accepted. The use of bite mark analysis to identify or exclude those suspected of crimes is now a well established activity in forensic dentistry. Although the techniques for evaluating bite mark evidence are extremely sophisticated, it is important that the courtroom presentation of such evidence should be as simple as possible and be directed towards those who must judge it. Dentists likely to be involved in the courtroom presentation of bite mark evidence should: be certain that their local law enforcement personnel are frequently updated on the techniques to be used for producing the optimum evidence needed to evaluate bite marks; become acquainted with the current techniques of evaluating bite mark evidence and understand their difficulties and pitfalls; meet with the lawyers (prosecution or defence) before a courtroom appearance, briefing them on the significance of the particular findings; prepare clear and easily understandable visual aids to present to the court the techniques used in the analysis and the bases for the conclusion reached; and offer conclusions derived from the bite mark investigation.

  11. Changing Context of Trade Mark Protection in India: A Review of the Trade Marks Act, 1999

    OpenAIRE

    Pathak, Akhileshwar

    2004-01-01

    With liberalisation and globalisation of the Indian economy, it has become possible for anyone to get into production and services in most of the sectors. This has led to rampant misuse and appropriation of trade marks. In an insulated economy, with monopoly markets, law protecting trade marks had a limited role. In the changed context, however, trade mark law will be a field of much interest for academics and practitioners. Towards this, the paper explores the formation of trade mark law in ...

  12. The District Nursing Clinical Error Reduction Programme.

    Science.gov (United States)

    McGraw, Caroline; Topping, Claire

    2011-01-01

    The District Nursing Clinical Error Reduction (DANCER) Programme was initiated in NHS Islington following an increase in the number of reported medication errors. The objectives were to reduce the actual degree of harm and the potential risk of harm associated with medication errors and to maintain the existing positive reporting culture, while robustly addressing performance issues. One hundred medication errors reported in 2007/08 were analysed using a framework that specifies the factors that predispose to adverse medication events in domiciliary care. Various contributory factors were identified and interventions were subsequently developed to address poor drug calculation and medication problem-solving skills and incorrectly transcribed medication administration record charts. Follow up data were obtained at 12 months and two years. The evaluation has shown that although medication errors do still occur, the programme has resulted in a marked shift towards a reduction in the associated actual degree of harm and the potential risk of harm.

  13. Elemental marking of arthropod pests in agricultural systems: single and multigenerational marking

    Science.gov (United States)

    Jane Leslie Hayes

    1991-01-01

    Use of elemental markers to study movement of arthropod pests of field crops is reviewed. Trace elements, rubidium (Rb) and cesium (Cs), have provided a nondisruptive method of marking natural adult populations via developmental stage consumption of treated host plants. Multigenerational marking occurs with the transfer of elemental markers from marked adults to...

  14. The INTEGRAL Core Observing Programme

    DEFF Research Database (Denmark)

    Winkler, C.; Gehrels, N.; Lund, Niels

    1999-01-01

    The Core Programme of the INTEGRAL mission is defined as the portion of the scientific programme covering the guaranteed time observations for the INTEGRAL Science Working Team. This paper describes the current status of the Core Programme preparations and summarizes the key elements...... of the observing programme....

  15. First results from Mark III at SPEAR

    International Nuclear Information System (INIS)

    Einsweiler, K.F.

    The paper presents data on meson decays obtained using the MARK III detector operating at SPEAR. Results on hadronic decays; decays of the etasub(e); and results on radiative decays; are all described. (U.K.)

  16. User's guide : pavement marking management system database.

    Science.gov (United States)

    2011-12-01

    Pavement markings play a critical role in maintaining a safe and efficient driving environment for road users, especially during nighttime conditions. The Texas Department of Transportation (TxDOT) spends millions of dollars each year for installatio...

  17. Mark Twain, Fenimore Cooper, and Batman.

    Science.gov (United States)

    Crick, Robert Alan

    1992-01-01

    Describes how Mark Twain's essay "Fenimore Cooper's Literary Offenses" helped students to get interested in writing and inspired them to write a similar essay critiquing the movie "Batman." Provides excerpts from students' essays. (PRA)

  18. 46 CFR 160.054-6 - Marking.

    Science.gov (United States)

    2010-10-01

    ... “To Close, Press Together Full Length”. The marking may be applied to the container by the silk screen process, using a suitable ink or paint, or may be applied by other means shown to be acceptable. (b...

  19. 49 CFR 180.213 - Requalification markings.

    Science.gov (United States)

    2010-10-01

    ... eddy current examination combined with a visual inspection, the marking is as illustrated in paragraph..., securely affixed in a manner prescribed by the cylinder manufacturer, near the original manufacturer's...

  20. Microscopic saw mark analysis: an empirical approach.

    Science.gov (United States)

    Love, Jennifer C; Derrick, Sharon M; Wiersema, Jason M; Peters, Charles

    2015-01-01

    Microscopic saw mark analysis is a well published and generally accepted qualitative analytical method. However, little research has focused on identifying and mitigating potential sources of error associated with the method. The presented study proposes the use of classification trees and random forest classifiers as an optimal, statistically sound approach to mitigate the potential for error of variability and outcome error in microscopic saw mark analysis. The statistical model was applied to 58 experimental saw marks created with four types of saws. The saw marks were made in fresh human femurs obtained through anatomical gift and were analyzed using a Keyence digital microscope. The statistical approach weighed the variables based on discriminatory value and produced decision trees with an associated outcome error rate of 8.62-17.82%. © 2014 American Academy of Forensic Sciences.

  1. Enamel-based mark performance for marking Chinese mystery snail Bellamya chinensis

    Science.gov (United States)

    Wong, Alec; Allen, Craig R.; Hart, Noelle M.; Haak, Danielle M.; Pope, Kevin L.; Smeenk, Nicholas A.; Stephen, Bruce J.; Uden, Daniel R.

    2013-01-01

    The exoskeleton of gastropods provides a convenient surface for carrying marks, and i the interest of improving future marking methods our laboratory assessed the performance of an enamel paint. The endurance of the paint was also compared to other marking methods assessed in the past. We marked the shells of 30 adult Chinese mystery snails Bellamya chinensis and held them in an aquarium for 181 days. We observed no complete degradation of any enamel-paint mark during the 181 days. The enamel-paint mark was superior to a nai;-polish mark, which lasted a median of 100 days. Enamel-paint marks also have a lower rate of loss (0.00 month-1 181 days) than plastic bee tags (0.01 month-1, 57 days), gouache paint (0.07 month-1, 18.5 days), or car body paint from studies found in scientific literature. Legibility of enamel-paint marks had a median lifetime of 102 days. The use of enamel paint on the shells of gastropods is a viable option for studies lasting up to 6 months. Furthermore, visits to capture-mark-recapture site 1 year after application of enamel-paint marks on B. chinesnis shells produced several individuals on which the enamel paint was still visible, although further testing is required to clarify durability over longer periods.

  2. PREOPERATIVE ENDOSCOPIC MARKING OF UNPALPABLE COLONIC TUMORS

    Directory of Open Access Journals (Sweden)

    A. L. Goncharov

    2013-01-01

    Full Text Available The identification of small colon lesions is one of the major problems in laparoscopic colonic resection.Research objective: to develop a technique of visualization of small tumors of a colon by preoperative endoscopic marking of a tumor.Materials and methods. In one day prior to operation to the patient after bowel preparation the colonoscopy is carried out. In the planned point near tumor on antimesentery edge the submucous infiltration of marking solution (Micky Sharpz blue tattoo pigment, UK is made. The volume of entered solution of 1–3 ml. In only 5 months of use of a technique preoperative marking to 14 patients with small (the size of 1–3 cm malignant tumors of the left colon is performed.Results. The tattoo mark was well visualized by during operation at 13 of 14 patients. In all cases we recorded no complications. Time of operation with preoperative marking averaged 108 min, that is significantly less in comparison with average time of operation with an intra-operative colonoscopy – 155 min (р < 0.001.Conclusions. The first experience of preoperative endoscopic marking of non palpable small tumors of a colon is encouraging. Performance of a technique wasn't accompanied by complications and allowed to reduce significantly time of operation and to simplify conditions of performance of operation.

  3. 25th anniversary of the Large Hadron Collider (LHC) experimental programme

    CERN Multimedia

    AUTHOR|(CDS)2094367

    2017-01-01

    On Friday 15 December 2017, CERN celebrated the 25th anniversary of the Large Hadron Collider (LHC) experimental programme. The occasion was marked with a special scientific symposium looking at the LHC’s history, the physics landscape into which the LHC experiments were born, and the challenging path that led to the very successful LHC programme we know today. The anniversary was linked to a meeting that took place in 1992, in Evian, entitled "Towards the LHC Experimental Programme", marking a crucial milestone in the design and development of the LHC experiments.

  4. The French nuclear programme

    International Nuclear Information System (INIS)

    Feger, M.

    1990-01-01

    EDF has long been interested in the use of nuclear energy for thermal power generation. After a period of apprenticeship and experiments, EDF launched a major PWR plant programme so as to reduce France's energy dependence and master generation costs. This programme, based on standardization, has achieved the desired results. It must now be adapted to suit the needs of the 21st century. For this programme, all those involved (Governmental authorities, EDF, manufacturers) were mobilized to an unprecedented extent and rigorous working methods were imposed. Experience feedback has been used to make improvements both to the installations themselves and to procedures. Results have proved satisfactory as regards nuclear safety but vigilance must be maintained. Public opinion on nuclear power is reserved we are sentenced to achieving a 'fault-free' track record, all the while mastering costs, so as to ensure the continuing use of nuclear energy. (author)

  5. The French nuclear programme

    Energy Technology Data Exchange (ETDEWEB)

    Feger, M [Ecole Nationale Superieure d' Electrotechnique de Grenoble, Institute National des Sciences et Techniques Nucleaires (Saclay), Gif-sur-Yvette, Electricite de France (France)

    1990-06-01

    EDF has long been interested in the use of nuclear energy for thermal power generation. After a period of apprenticeship and experiments, EDF launched a major PWR plant programme so as to reduce France's energy dependence and master generation costs. This programme, based on standardization, has achieved the desired results. It must now be adapted to suit the needs of the 21st century. For this programme, all those involved (Governmental authorities, EDF, manufacturers) were mobilized to an unprecedented extent and rigorous working methods were imposed. Experience feedback has been used to make improvements both to the installations themselves and to procedures. Results have proved satisfactory as regards nuclear safety but vigilance must be maintained. Public opinion on nuclear power is reserved we are sentenced to achieving a 'fault-free' track record, all the while mastering costs, so as to ensure the continuing use of nuclear energy. (author)

  6. External Mobility Programme

    CERN Multimedia

    HR Department

    2007-01-01

    Every year, a significant number of highly-skilled staff members leave the Organization and offer their talents on the European job market. CERN is launching a programme aiming to help staff members to whom the Organization cannot offer an indefinite contract in the transition towards their next employment. The programme, which is based on the establishment of a number of partnerships with potential employers in the private sector, will run on a voluntary basis. Staff members who have received confirmation that they will not be offered an indefinite contract and who are interested in availing themselves of the opportunities offered by the programme, are invited to enrol by following the procedure described at: https://ert.cern.ch/browse_intranet/wd_pds?p_web_page_id=5841 Applications will be processed in the strictest confidence by the Human Resources Department and eligible profiles will then be made available to partner companies for recruitment purposes. Any subsequent ...

  7. Visual examination program of the TRIGA Mark II reactor Vienna with the nuclear underwater telescope

    International Nuclear Information System (INIS)

    Boeck, H.; Hammer, J.; Varga, K.

    1985-12-01

    The visual inspection programm carried out during a three month shut-period at the TRIGA Mark II reactor Vienna is described. Optical inspection of all welds inside the reactor tank was carried out with an underwater telescope developed by the Central Research Institute of Physics, Budapest, Hungary. It is shown that even after 23 years of reactor operation all tank internals were found to be in good condition and minor defects can be easily repaired by remote handling tools. (Author)

  8. SLAC Scanner Processor applications in the data acquisition system for the upgraded Mark II detector

    International Nuclear Information System (INIS)

    Barklow, T.; Glanzman, T.; Lankford, A.J.; Riles, K.

    1985-09-01

    The SLAC Scanner Processor is a general purpose, programmable FASTBUS crate/cable master/slave module. This device plays a central role in the readout, buffering and pre-processing of data from the upgraded Mark II detector's new central drift chamber. In addition to data readout, the SSPs assist in a variety of other services, such as detector calibration, FASTBUS system management, FASTBUS system initialization and verification, and FASTBUS module testing. 9 refs., 1 fig., 2 tabs

  9. Probabilistic programmable quantum processors

    International Nuclear Information System (INIS)

    Buzek, V.; Ziman, M.; Hillery, M.

    2004-01-01

    We analyze how to improve performance of probabilistic programmable quantum processors. We show how the probability of success of the probabilistic processor can be enhanced by using the processor in loops. In addition, we show that an arbitrary SU(2) transformations of qubits can be encoded in program state of a universal programmable probabilistic quantum processor. The probability of success of this processor can be enhanced by a systematic correction of errors via conditional loops. Finally, we show that all our results can be generalized also for qudits. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

  10. A programme in transition

    International Nuclear Information System (INIS)

    Dean, S.O.

    1992-01-01

    Fusion is beginning its transition from a scientific research programme to that of an engineering development programme aimed at practical applications. This transition is likely to last a decade or more because many scientific questions remain and because of the magnitude and cost of the engineering issues. This article reviews briefly the encouraging results produced at the Joint European Torus (JET) where 1.7 MW of fusion power was generated for 2 seconds in experiments in November 1991, the remaining scientific issues, the role of near-term experimental reactors like the International Thermonuclear Experimental reactor (ITER) and other approaches to a demonstration power plant. (author)

  11. Computer mathematics for programmers

    CERN Document Server

    Abney, Darrell H; Sibrel, Donald W

    1985-01-01

    Computer Mathematics for Programmers presents the Mathematics that is essential to the computer programmer.The book is comprised of 10 chapters. The first chapter introduces several computer number systems. Chapter 2 shows how to perform arithmetic operations using the number systems introduced in Chapter 1. The third chapter covers the way numbers are stored in computers, how the computer performs arithmetic on real numbers and integers, and how round-off errors are generated in computer programs. Chapter 4 details the use of algorithms and flowcharting as problem-solving tools for computer p

  12. 2007 2008 ACADEMIC TRAINING PROGRAMME

    CERN Multimedia

    2008-01-01

    LECTURE SERIES 6 & 8 May 2008 11:00 -12:00 – Main Auditorium, bldg. 500-1 Energy isn’t Everything: CERN’s Fixed Target Niche Prof. John DAINTON / Cockcroft Institute & Liverpool University, UK Fixed target physics at CERN remains an essential part of the Laboratory’s scientific programme and horizon. In recent years fixed target and decay physics using CERN’s unique accelerator and beam facilities has continued to enable unique experiments to be undertaken. An overview is presented of the status of this physics and, wherever appropriate, of its future. LECTURE SERIES 7 May 2008 11:00 -12:00 – TH Auditorium – Bldg. 4-3-006 A rich revenue from the use of radioactive beams and radioactive targets: recent highlights from the nTOF and ISOLDE facilities 9 May 2008 11:00 -12:00 – Main Auditorium, bldg. 500-1 The fifth decade of ISOLDE: HIE-ISOLDE Professor Mark HUYSE, Leuven University, BE The On-Line Isotope Mass Separator ISOLDE is a facility dedicated to the production of a...

  13. Forensic surface metrology: tool mark evidence.

    Science.gov (United States)

    Gambino, Carol; McLaughlin, Patrick; Kuo, Loretta; Kammerman, Frani; Shenkin, Peter; Diaczuk, Peter; Petraco, Nicholas; Hamby, James; Petraco, Nicholas D K

    2011-01-01

    Over the last several decades, forensic examiners of impression evidence have come under scrutiny in the courtroom due to analysis methods that rely heavily on subjective morphological comparisons. Currently, there is no universally accepted system that generates numerical data to independently corroborate visual comparisons. Our research attempts to develop such a system for tool mark evidence, proposing a methodology that objectively evaluates the association of striated tool marks with the tools that generated them. In our study, 58 primer shear marks on 9 mm cartridge cases, fired from four Glock model 19 pistols, were collected using high-resolution white light confocal microscopy. The resulting three-dimensional surface topographies were filtered to extract all "waviness surfaces"-the essential "line" information that firearm and tool mark examiners view under a microscope. Extracted waviness profiles were processed with principal component analysis (PCA) for dimension reduction. Support vector machines (SVM) were used to make the profile-gun associations, and conformal prediction theory (CPT) for establishing confidence levels. At the 95% confidence level, CPT coupled with PCA-SVM yielded an empirical error rate of 3.5%. Complementary, bootstrap-based computations for estimated error rates were 0%, indicating that the error rate for the algorithmic procedure is likely to remain low on larger data sets. Finally, suggestions are made for practical courtroom application of CPT for assigning levels of confidence to SVM identifications of tool marks recorded with confocal microscopy. Copyright © 2011 Wiley Periodicals, Inc.

  14. Mark 4A project training evaluation

    Science.gov (United States)

    Stephenson, S. N.

    1985-11-01

    A participant evaluation of a Deep Space Network (DSN) is described. The Mark IVA project is an implementation to upgrade the tracking and data acquisition systems of the dSN. Approximately six hundred DSN operations and engineering maintenance personnel were surveyed. The survey obtained a convenience sample including trained people within the population in order to learn what training had taken place and to what effect. The survey questionnaire used modifications of standard rating scales to evaluate over one hundred items in four training dimensions. The scope of the evaluation included Mark IVA vendor training, a systems familiarization training seminar, engineering training classes, a on-the-job training. Measures of central tendency were made from participant rating responses. Chi square tests of statistical significance were performed on the data. The evaluation results indicated that the effects of different Mark INA training methods could be measured according to certain ratings of technical training effectiveness, and that the Mark IVA technical training has exhibited positive effects on the abilities of DSN personnel to operate and maintain new Mark IVA equipment systems.

  15. Mark 4A project training evaluation

    Science.gov (United States)

    Stephenson, S. N.

    1985-01-01

    A participant evaluation of a Deep Space Network (DSN) is described. The Mark IVA project is an implementation to upgrade the tracking and data acquisition systems of the dSN. Approximately six hundred DSN operations and engineering maintenance personnel were surveyed. The survey obtained a convenience sample including trained people within the population in order to learn what training had taken place and to what effect. The survey questionnaire used modifications of standard rating scales to evaluate over one hundred items in four training dimensions. The scope of the evaluation included Mark IVA vendor training, a systems familiarization training seminar, engineering training classes, a on-the-job training. Measures of central tendency were made from participant rating responses. Chi square tests of statistical significance were performed on the data. The evaluation results indicated that the effects of different Mark INA training methods could be measured according to certain ratings of technical training effectiveness, and that the Mark IVA technical training has exhibited positive effects on the abilities of DSN personnel to operate and maintain new Mark IVA equipment systems.

  16. Mexican medfly programme

    International Nuclear Information System (INIS)

    1980-01-01

    This film tells the story of the fight against and final extinction of the Mediterranean fruit-fly (Ceratitis capitata) in Mexico. By producing billions of high quality sterile flies in the Medfly reproduction and sterilization laboratory in the province of Chiapas and releasing them over infested areas, the Moscamed Programme succeeded in eradicating this pest from Mexico in 1982

  17. Nuclear safety. Improvement programme

    International Nuclear Information System (INIS)

    2000-01-01

    In this brochure the improvement programme of nuclear safety of the Mochovce NPP is presented in detail. In 1996, a 'Mochovce NPP Nuclear Safety Improvement Programme' was developed in the frame of unit 1 and 2 completion project. The programme has been compiled as a continuous one, with the aim to reach the highest possible safety level at the time of commissioning and to establish good preconditions for permanent safety improvement in future. Such an approach is in compliance with the world's trends of safety improvement, life-time extension, modernisation and nuclear station power increase. The basic document for development of the 'Programme' is the one titled 'Safety Issues and their Ranking for WWER 440/213 NPP' developed by a group of IAEA experts. The following organisations were selected for solution of the safety measures: EUCOM (Consortium of FRAMATOME, France, and SIEMENS, Germany); SKODA Prague, a.s.; ENERGOPROJEKT Prague, a.s. (EGP); Russian organisations associated in ATOMENERGOEXPORT; VUJE Trnava, a.s

  18. Progressive Retirement Programme

    CERN Document Server

    HR Department

    2009-01-01

    Following the Standing Concertation Committee meeting of 2 December 2008, please note that the Progressive Retirement Programme has been extended by one year, i.e. until 31 March 2010. Further information is available on : https://hr-services.web.cern.ch/hr-services/services-Ben/prp/prp.asp HR Department, tel. 73903

  19. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1985-10-01

    KfK is involved in the European Fusion Programme predominantly in the NET and Fusion Technology part. The following fields of activity are covered: Studies for NET, alternative confinement concepts, and needs and issues of integral testing. Research on structural materials. Development of superconducting magnets. Gyrotron development (part of the Physics Programme). Nuclear technology (breeding materials, blanket design, tritium technology, safety and environmental aspects of fusion, remote maintenance). Reported here are status and results of work under contracts with the CEC within the NET and Technology Programme. The aim of the major part of this R and D work is the support of NET, some areas (e.g. materials, safety and environmental impact, blanket design) have a wider scope and address problems of a demonstration reactor. In the current working period, several new proposals have been elaborated to be implemented into the 85/89 Euratom Fusion Programme. New KfK contributions relate to materials research (dual beam and fast reactor irradiations, ferritic steels), to blanket engineering (MHD-effects) and to safety studies (e.g. magnet safety). (orig./GG)

  20. SET-Routes programme

    CERN Multimedia

    Marietta Schupp, EMBL Photolab

    2008-01-01

    Dr Sabine Hentze, specialist in human genetics, giving an Insight Lecture entitled "Human Genetics – Diagnostics, Indications and Ethical Issues" on 23 September 2008 at EMBL Heidelberg. Activities in a achool in Budapest during a visit of Angela Bekesi, Ambassadors for the SET-Routes programme.

  1. Programmable dc motor controller

    Science.gov (United States)

    Hopwood, J. E.

    1982-11-01

    A portable programmable dc motor controller, with features not available on commercial instruments was developed for controlling fixtures during welding processes. The controller can be used to drive any dc motor having tachometer feedback and motor requirements not exceeding 30 volts, 3 amperes. Among the controller's features are delayed start time, upslope time, speed, and downslope time.

  2. Exchange and fellowship programme

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-04-15

    By February 1959, the IAEA had received and considered nearly 300 nominations from 31 countries for nuclear science fellowships. More than 200 of the candidates - from 29 countries - had been selected for placement in centres of training in 21 countries. The programme covers three types of training: 1. General techniques training: to develop skills in the use of some fundamental techniques in the field of nuclear energy; 2. Specialist training: to prepare specialists in the theoretical and experimental aspects of the science and technology of nuclear energy; 3. Research training: to provide advanced training, including active participation in research work; this is for persons potentially qualified to develop and carry out research programmes in the basic sciences and engineering. The duration of training varies from some weeks to five or six years. The long-duration training is given at universities or educational establishments of university level, and is of special interest to Member States lacking personnel with the requisite university education. Under its 1959 exchange and fellowship programme, the Agency will be in a position to award over 400 fellowships. Some of these will be paid out of the Agency's operating fund, while 130 fellowships have been offered directly to IAEA by Member States for training at their universities or institutes. There are two new features in the Agency's 1959 programme. One provides for fellowships for scientific research work, the other is the exchange of specialists

  3. Air Quality Monitoring Programme

    DEFF Research Database (Denmark)

    Kemp, K.; Palmgren, F.

    The Danish Air Quality Monitoring Programme (LMP IV) has been revised in accordance with the Framework Directive and the first three daughter directives of SO2, NOx/NO2, PM10, lead, benzene, CO and ozone. PM10 samplers are under installation and the installation will be completed during 2002...

  4. Conceptualizing Programme Evaluation

    Science.gov (United States)

    Hassan, Salochana

    2013-01-01

    The main thrust of this paper deals with the conceptualization of theory-driven evaluation pertaining to a tutor training programme. Conceptualization of evaluation, in this case, is an integration between a conceptualization model as well as a theoretical framework in the form of activity theory. Existing examples of frameworks of programme…

  5. The European Programme Manager

    DEFF Research Database (Denmark)

    Larson, Anne; Bergman, E.; Ehlers, S.

    The publication is a result of a cooperation between organisations in six European countries with the aim to develop a common European education for programme managers. It contains of a description of the different elements of the education together with a number of case-studies from the counties...

  6. The Productive Programmer

    CERN Document Server

    Ford, Neal

    2009-01-01

    Anyone who develops software for a living needs a proven way to produce it better, faster, and cheaper. The Productive Programmer offers critical timesaving and productivity tools that you can adopt right away, no matter what platform you use. Master developer Neal Ford details ten valuable practices that will help you elude common traps, improve your code, and become more valuable to your team.

  7. The national hydrologic bench-mark network

    Science.gov (United States)

    Cobb, Ernest D.; Biesecker, J.E.

    1971-01-01

    The United States is undergoing a dramatic growth of population and demands on its natural resources. The effects are widespread and often produce significant alterations of the environment. The hydrologic bench-mark network was established to provide data on stream basins which are little affected by these changes. The network is made up of selected stream basins which are not expected to be significantly altered by man. Data obtained from these basins can be used to document natural changes in hydrologic characteristics with time, to provide a better understanding of the hydrologic structure of natural basins, and to provide a comparative base for studying the effects of man on the hydrologic environment. There are 57 bench-mark basins in 37 States. These basins are in areas having a wide variety of climate and topography. The bench-mark basins and the types of data collected in the basins are described.

  8. ADS National Programmes: China

    International Nuclear Information System (INIS)

    2015-01-01

    In China the conceptual study of an ADS concept which lasted for about five years ended in 1999. As one project of the National Basic Research Programme of China (973 Programme) in energy domain, which is sponsored by the China Ministry of Science and Technology (MOST), a five year programme of fundamental research of ADS physics and related technology was launched in 2000 and passed national review at the end of 2005. From 2007, another five year 973 Programme Key Technology Research of Accelerator Driven Subcritical System for Nuclear waste Transmutation started. The research activities were focused on HPPA physics and technology, reactor physics of external source driven subcritical assembly, nuclear data base and material study. For HPPA, a high current injector consisting of an ECR ion source, LEBT and an RFQ accelerating structure of 3.5 MeV has been built and were being improved. In reactor physics study, a series of neutron multiplication experimental study has been carrying out. The VENUS I facility has been constructed as the basic experimental platform for neutronics study in ADS blanket. VENUS I a zero power subcritical neutron multiplying assembly driven by external neutron produced by a pulsed neutron generator or 252Cf neutron source. The theoretical, experimental and simulation studies on nuclear data, material properties and nuclear fuel circulation related to ADS are carried out in order to provide the database for ADS system analysis. China Institute of Atomic Energy (CIAE), Institute of High Energy Physics (IHEP) and other Chinese institutes carried out the MOST project together. Besides CIAE, China Academy of Science (CAS) pays more and more attention to Advanced Nuclear Fuel Cycles (ANFC). A large programme of ANFC, including ADS and Th based nuclear fuel cycle, has been launched by CAS

  9. The Mark II Vertex Drift Chamber

    International Nuclear Information System (INIS)

    Alexander, J.P.; Baggs, R.; Fujino, D.

    1989-03-01

    We have completed constructing and begun operating the Mark II Drift Chamber Vertex Detector. The chamber, based on a modified jet cell design, achieves 30 μm spatial resolution and 2 gas mixtures. Special emphasis has been placed on controlling systematic errors including the use of novel construction techniques which permit accurate wire placement. Chamber performance has been studied with cosmic ray tracks collected with the chamber located both inside and outside the Mark II. Results on spatial resolution, average pulse shape, and some properties of CO 2 mixtures are presented. 10 refs., 12 figs., 1 tab

  10. THE MARK I BUSINESS SYSTEM SIMULATION MODEL

    Science.gov (United States)

    of a large-scale business simulation model as a vehicle for doing research in management controls. The major results of the program were the...development of the Mark I business simulation model and the Simulation Package (SIMPAC). SIMPAC is a method and set of programs facilitating the construction...of large simulation models. The object of this document is to describe the Mark I Corporation model, state why parts of the business were modeled as they were, and indicate the research applications of the model. (Author)

  11. Regionaalpoliitika ja arhitektuur / Ülar Mark

    Index Scriptorium Estoniae

    Mark, Ülar

    1999-01-01

    Kagu-Eesti Regionaalarengu Programmi raames Eesti Kunstiakadeemia arhitektuurikateedri IV kursuse eriala valikaines 1998/99 tehtud tööst "HyperMobiilne Reaalsus & Kagu Eesti" (juhendajad Ralf Tamm, Ülar Mark). Ühises töös osalesid Tartu Ülikooli geograafiatudengid (juhendaja Rein Ahas). 4 illustratsiooni

  12. Nekroloog turundusele / Mark Earls ; interv. Margo Kokerov

    Index Scriptorium Estoniae

    Earls, Mark

    2003-01-01

    Turunduskommunikatsioonifirma Ogilvy & Mather suunajuht Mark Earls leiab, et kuna turg on üle ujutatud võrdselt heade toodetega ja tarbija teab, et tegelikult pole oluline, millise toote ta valib, muutub turundusrevolutsiooni keskne idee - tarbijavajaduste kindlakstegemine ja rahuldamine - tähtsusetuks.

  13. 49 CFR 15.13 - Marking SSI.

    Science.gov (United States)

    2010-10-01

    ... SSI. (a) Marking of paper records. In the case of paper records containing SSI, a covered person must... limitation statement on the bottom, of— (1) The outside of any front and back cover, including a binder cover... types of records. In the case of non-paper records that contain SSI, including motion picture films...

  14. Monopoly, Pareto and Ramsey mark-ups

    NARCIS (Netherlands)

    Ten Raa, T.

    2009-01-01

    Monopoly prices are too high. It is a price level problem, in the sense that the relative mark-ups have Ramsey optimal proportions, at least for independent constant elasticity demands. I show that this feature of monopoly prices breaks down the moment one demand is replaced by the textbook linear

  15. Globaalne palavik ja Nord Stream / Mark Soosaar

    Index Scriptorium Estoniae

    Soosaar, Mark, 1946-

    2009-01-01

    Riigikogu keskkonnakomisjoni liikme Mark Soosaare sõnul peaks Eesti Taani eeskujul jõudma parlamentaarse otsuseni loobuda tuumajaamaehitusest, vähendada tuleks märgatavalt Eesti metsade raiumist. Vene-Saksa gaasitarneleppe vastu töötamise asemel tuleks otsida ühisosa nii Venemaa kui teiste Läänemeremaadega

  16. Teaching Mark through a postcolonial optic

    African Journals Online (AJOL)

    2015-07-16

    Jul 16, 2015 ... question, eliciting answers that range from Mark as in direct and open ... or armed response, especially in a context where such actions were unrealistic. (whether ..... identity; social memory; to name a few) of power. It implies ... an elite-driven enterprise in the simplistic sense of the word, although the elite's ...

  17. First results from Mark II at SPEAR

    International Nuclear Information System (INIS)

    Abrams, G.S.; Alam, M.S.; Blocker, C.A.

    1979-05-01

    First results from the SLAC-LBL Mark II magnetic detector at SPEAR are presented. The performance of the detector is discussed and preliminary results are given on inclusive baryon production R/sub p + anti p/, R/sub Λ + anti Λ/, on decay modes of the D mesons and on two-photon production of eta' mesons

  18. 15 CFR 1150.3 - Approved markings.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Approved markings. 1150.3 Section 1150.3 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued... permanently affixed to the exterior surface of the barrel, covering the circumference of the barrel from the...

  19. 22 CFR 226.91 - Marking.

    Science.gov (United States)

    2010-04-01

    ... Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Miscellaneous § 226.91 Marking. (a) USAID policy is that all programs, projects, activities... support of the American people through the United States Agency for International Development (USAID). The...

  20. Fingerprint Analysis with Marked Point Processes

    DEFF Research Database (Denmark)

    Forbes, Peter G. M.; Lauritzen, Steffen; Møller, Jesper

    We present a framework for fingerprint matching based on marked point process models. An efficient Monte Carlo algorithm is developed to calculate the marginal likelihood ratio for the hypothesis that two observed prints originate from the same finger against the hypothesis that they originate from...... different fingers. Our model achieves good performance on an NIST-FBI fingerprint database of 258 matched fingerprint pairs....

  1. A Collar for Marking Big Game Animals

    Science.gov (United States)

    Robert L. Phillips

    1970-01-01

    A Simple, inexpensive collar made of Armor-tite (a vinyl-coated nylon fabric) was designed for marking white-tailed deer (Odocoileus virginianus) and moose (Alces alces). Field tests showed that the material is easily seen and extrememly durable. It may be suitable for use on other large mammals. The collar can be quickly fitted to individual animals under field...

  2. The Four Marks of Holistic Kinesiology

    Science.gov (United States)

    Twietmeyer, Gregg

    2012-01-01

    What, to borrow a theological phrase, are the marks of a truly holistic kinesiology department? "In Kinesis and the Nature of the Human Person" (2010), I examined the theoretical impact of Aristotle's definition of "kinesis" and Polanyi's theory of "tacit knowledge" on kinesiology. The intention here, however, is practical rather than theoretical.…

  3. Marks & Spencer loob ELis maksupretsedenti / Sirje Rank

    Index Scriptorium Estoniae

    Rank, Sirje, 1966-

    2005-01-01

    Ilmunud ka: Delovõje Vedomosti 13. apr. lk. 6. Briti rõivakett Marks & Spencer kaebas, et Briti maksuseadused, mis ei lubanud emafirma Suurbritannias maksustavast tulust maha kanda Saksamaal, Prantsusmaal ja Belgias asunud tütarfirmade suuri kahjumeid üheksakümnendate aastate lõpus, on vastuolus EL-i ühisturu seadustega

  4. Do clinicians use more question marks?

    NARCIS (Netherlands)

    Zijlmans, Maeike; Otte, Willem M; Van't Klooster, Maryse A; van Diessen, Eric; Leijten, Frans Ss; Sander, Josemir W

    2015-01-01

    OBJECTIVE: To quantify the use of question marks in titles of published studies. DESIGN AND SETTING: Literature review. PARTICIPANTS: All Pubmed publications between 1 January 2013 and 31 December 2013 with an available abstract. Papers were classified as being clinical when the search terms clin*,

  5. 27 CFR 28.216 - Export marks.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.216 Section 28.216 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS EXPORTATION OF ALCOHOL Exportation of Wine With Benefit of Drawback § 28.216...

  6. Primary Science Quality Mark--2016 Update

    Science.gov (United States)

    Turner, Jane

    2016-01-01

    Back in May 2011, an article in "Primary Science" described how the idea for a quality mark for primary science was developed from an initial conversation at an Association for Science Education annual conference (Turner, Marshall and Elsmore, 2011). Its intention then, as now, was to support and champion good practice and raise the…

  7. Donor transplant programme

    International Nuclear Information System (INIS)

    Abu Bakar Sulaiman

    1999-01-01

    The transplantation of organs and tissues from one human to another human has become an essential and well established form of therapy for many types of organ and tissue failure. In Malaysia, kidney, cornea and bone marrow transplantation are well established. Recently, liver, bone and heart transplanation have been performed. Unfortunately, because of the lack of cadaveric organ donation, only a limited number of solid organ transplantation have been performed. The cadaveric organ donor rate in Malaysia is low at less than one per million population. The first tissue transplanted in Malaysia was the cornea which was performed in the early 1970s. At that time and even now the majority of corneas came from Sri Lanka. The first kidney transplant was performed in 1975 from a live related donor. The majority of the 629 kidney transplants done at Hospital Kuala Lumpur to date have been from live related donors. Only 35 were from cadaver donors. Similarly, the liver transplantation programme which started in 1995 are from live related donors. A more concerted effort has been made recently to increase the awareness of the public and the health professionals on organ and tissue donation. This national effort to promote organ and tissue donation seems to have gathered momentum in 1997 with the first heart transplant successfully performed at the National Heart Institute. The rate of cadaveric donors has also increased from a previous average of I to 2 per year to 6 per year in the last one year. These developments are most encouraging and may signal the coming of age of our transplantati on programme. The Ministry of Health in conjunction with various institutions, organizations and professional groups, have taken a number of proactive measures to facilitate the development of the cadaveric organ donation programme. Efforts to increase public awareness and to overcome the negative cultural attitude towards organ donation have been intensified. Equally important are efforts

  8. Climate Ambassador Programmes in Municipalities

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Pedersen, Stine Rahbek

    2016-01-01

    Some Danish municipalities have developed ambassador programmes which generate environmental and climate change mitigation efforts in local public administrations and institutions. This chapter analyses the characteristics and experiences of four ambassador programmes now operating...

  9. Mammographic screening programmes in Europe

    DEFF Research Database (Denmark)

    Giordano, Livia; von Karsa, Lawrence; Tomatis, Mariano

    2012-01-01

    To summarize participation and coverage rates in population mammographic screening programmes for breast cancer in Europe.......To summarize participation and coverage rates in population mammographic screening programmes for breast cancer in Europe....

  10. Distinguishing butchery cut marks from crocodile bite marks through machine learning methods.

    Science.gov (United States)

    Domínguez-Rodrigo, Manuel; Baquedano, Enrique

    2018-04-10

    All models of evolution of human behaviour depend on the correct identification and interpretation of bone surface modifications (BSM) on archaeofaunal assemblages. Crucial evolutionary features, such as the origin of stone tool use, meat-eating, food-sharing, cooperation and sociality can only be addressed through confident identification and interpretation of BSM, and more specifically, cut marks. Recently, it has been argued that linear marks with the same properties as cut marks can be created by crocodiles, thereby questioning whether secure cut mark identifications can be made in the Early Pleistocene fossil record. Powerful classification methods based on multivariate statistics and machine learning (ML) algorithms have previously successfully discriminated cut marks from most other potentially confounding BSM. However, crocodile-made marks were marginal to or played no role in these comparative analyses. Here, for the first time, we apply state-of-the-art ML methods on crocodile linear BSM and experimental butchery cut marks, showing that the combination of multivariate taphonomy and ML methods provides accurate identification of BSM, including cut and crocodile bite marks. This enables empirically-supported hominin behavioural modelling, provided that these methods are applied to fossil assemblages.

  11. 19 CFR 11.9 - Special marking on certain articles.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Special marking on certain articles. 11.9 Section... OF THE TREASURY PACKING AND STAMPING; MARKING Marking § 11.9 Special marking on certain articles. (a... of additional U.S. Note 4, Chapter 91. If any article so required to be marked is found not to be...

  12. 19 CFR 134.43 - Methods of marking specific articles.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Methods of marking specific articles. 134.43...; DEPARTMENT OF THE TREASURY COUNTRY OF ORIGIN MARKING Method and Location of Marking Imported Articles § 134.43 Methods of marking specific articles. (a) Marking previously required by certain provisions of the...

  13. The TELEMAN programme

    International Nuclear Information System (INIS)

    Nordwall, H.J. de

    1990-01-01

    The TELEMAN programme is a five year cost-shared research programme covering remote handling in hazardous and disordered nuclear environments. TELEMAN's objective is to strengthen the scientific and engineering bases upon which the design of teleoperators for use throughout the nuclear industry rests. This will be done by providing new solutions to problems of manipulation, material transport and mobile surveillance in nuclear environments and by demonstrating their feasibility. The Commission's motivations lie in the potential teleoperators have to improve the separation of workers from radioactive equipment. The same technology will also enable plant operators and public authorities to deal more effectively with nuclear accidents. Finally, gains in productivity, particularly in the repair and maintenance area can be expected. Community support is justified by the cost of the reliability and autonomy required for the nuclear teleoperator, the need to rationalise R and D investment in an area of increasing industrial potential and a common interest in coherent responses to emergencies. (author)

  14. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1984-10-01

    The KfK-Association has continued work on 17 R and D contracts of the Fusion Technology Programme. An effort of 94 manyears per year is at present contributed by 10 KfK departments, covering all aereas defined in the Fusion Technology Programme. The dominant part of the work is directed towards the need of the NET design or supporting experiments. Some additional effort addresses long term technological issues and system studies relevant to DEMO or confinement schemes alternative to tokamaks. Direct contribution to the NET team has increased by augmentation of NET study contracts and delegation of personnel, three KfK delegates being at present members of the NET team. In reverse, specifications and design guidelines worked out by NET have started to have an impact on the current R and D-work in the laboratory. (orig./GG)

  15. Bioergia Research Programme

    Energy Technology Data Exchange (ETDEWEB)

    Asplund, D.

    1997-12-31

    The main objectives of Finland`s Bioenergia Research Programme are (1) To develop new methods of producing biofuels which can compete with imported fuels, demonstrating the most promising production methods through pilot schemes, (2) To develop and demonstrate 3 - 4 new pieces of equipment or methods connected with handling and using bioenergy, (3) To produce basic information on conversion techniques and evaluate the quality, usability and environmental impacts of the products as well as the overall economy of the entire production chain and to create 2-3 conversion methods for follow-up development by industry. The principle research areas are (1) Development of production technology for wood-derived fuels, (2) Peat production, (3) The use of bioenergy and (4) Biomass conversion. This conference paper discusses the results obtained so far and reviews in some detail the activities of the programme. 3 figs., 3 tabs.

  16. A programmable artificial retina

    International Nuclear Information System (INIS)

    Bernard, T.M.; Zavidovique, B.Y.; Devos, F.J.

    1993-01-01

    An artificial retina is a device that intimately associates an imager with processing facilities on a monolithic circuit. Yet, except for simple environments and applications, analog hardware will not suffice to process and compact the raw image flow from the photosensitive array. To solve this output problem, an on-chip array of bare Boolean processors with halftoning facilities might be used, providing versatility from programmability. By setting the pixel memory size to 3 b, the authors have demonstrated both the technological practicality and the computational efficiency of this programmable Boolean retina concept. Using semi-static shifting structures together with some interaction circuitry, a minimal retina Boolean processor can be built with less than 30 transistors and controlled by as few as 6 global clock signals. The successful design, integration, and test of such a 65x76 Boolean retina on a 50-mm 2 CMOS 2-μm circuit are presented

  17. Bioergia Research Programme

    Energy Technology Data Exchange (ETDEWEB)

    Asplund, D

    1998-12-31

    The main objectives of Finland`s Bioenergia Research Programme are (1) To develop new methods of producing biofuels which can compete with imported fuels, demonstrating the most promising production methods through pilot schemes, (2) To develop and demonstrate 3 - 4 new pieces of equipment or methods connected with handling and using bioenergy, (3) To produce basic information on conversion techniques and evaluate the quality, usability and environmental impacts of the products as well as the overall economy of the entire production chain and to create 2-3 conversion methods for follow-up development by industry. The principle research areas are (1) Development of production technology for wood-derived fuels, (2) Peat production, (3) The use of bioenergy and (4) Biomass conversion. This conference paper discusses the results obtained so far and reviews in some detail the activities of the programme. 3 figs., 3 tabs.

  18. The Brazilian nuclear programme

    International Nuclear Information System (INIS)

    Forman, J.M.A.

    1990-01-01

    Developing an energy policy for a country the size of Brazil is a formidable task. Large differences between the regions in geography and economic development do not allow for a uniform plan. In the mid 1970s, Brazil started a nuclear energy programme to provide it with another option in its energy planning. The objective of the programme was gradually to build a technical and industrial base for nuclear power in the country, so that it would be available when it was needed. It was recognized that it would not be easy for a developing country to acquire the necessary high technology. The organization of the industry is outlined, demand projections are presented and domestic supplies of uranium assessed. (author)

  19. The VIDA programme

    DEFF Research Database (Denmark)

    Jensen, Bente; Iannone, Rosa Lisa

    and Innovation’ within the project ‘Curriculum Quality Analysis and Impact Review of European Education and Care’ (CARE). The programme at the centre of this case builds on theory drawn from research on child development, social disadvantage related to issues of social inequality, and research on organisational...... of innovation as “the development of new concepts, strategies and tools that support groups in achieving the objective of improved well-being”. Three research questions are explored: 1) How is the innovative approach to ECEC professional development conceptualised and translated into practice in the VIDA...... (mechanisms/aspects) affect the implementation of the innovative programme for practice change within ECEC? Methods used include a combination of qualitative data collected through interviews with ECEC educators, managers, consultants, a university college teachers, municipal directors and existing...

  20. Bioergia Research Programme

    International Nuclear Information System (INIS)

    Asplund, D.

    1997-01-01

    The main objectives of Finland's Bioenergia Research Programme are (1) To develop new methods of producing biofuels which can compete with imported fuels, demonstrating the most promising production methods through pilot schemes, (2) To develop and demonstrate 3 - 4 new pieces of equipment or methods connected with handling and using bioenergy, (3) To produce basic information on conversion techniques and evaluate the quality, usability and environmental impacts of the products as well as the overall economy of the entire production chain and to create 2-3 conversion methods for follow-up development by industry. The principle research areas are (1) Development of production technology for wood-derived fuels, (2) Peat production, (3) The use of bioenergy and (4) Biomass conversion. This conference paper discusses the results obtained so far and reviews in some detail the activities of the programme. 3 figs., 3 tabs

  1. The ACIGA data analysis programme

    International Nuclear Information System (INIS)

    Scott, Susan M; Searle, Antony C; Cusack, Benedict J; McClelland, David E

    2004-01-01

    The data analysis programme of the Australian Consortium for Interferometric Gravitational Astronomy (ACIGA) was set up in 1998 by Scott to complement the then existing ACIGA programmes working on suspension systems, lasers and optics and detector configurations. The ACIGA data analysis programme continues to contribute significantly in the field; we present an overview of our activities

  2. Programmable synchronous communications module

    International Nuclear Information System (INIS)

    Horelick, D.

    1979-10-01

    The functional characteristics of a programmable, synchronous serial communications CAMAC module with buffering in block format are described. Both bit and byte oriented protocols can be handled in full duplex depending on the program implemented. The main elements of the module are a Signetics 2652 Multi-Protocol Communications Controller, a Zilog Z-808 8 bit microprocessor with PROM and RAM, and FIFOs for buffering

  3. Programme budget 1981

    International Nuclear Information System (INIS)

    1980-01-01

    There are 11 main fields of KfK R + D activities which are connected with one or more of the research goals of a) assurance of nuclear fuel supply, b) nuclear waste management, c) safety of nuclear facilities, d) basic research and research on new technologies. The scientific and technical tasks connected with these goals in 1981 and on a medium-term basis as well as the financial requirements are presented in the programme budget. (orig.) [de

  4. Programmable waveform controller

    International Nuclear Information System (INIS)

    Yeh, H.T.

    1979-01-01

    A programmable waveform controller (PWC) was developed for voltage waveform generation in the laboratory. It is based on the Intel 8080 family of chips. The hardware uses the modular board approach, sharing a common 44-pin bus. The software contains two separate programs: the first generates a single connected linear ramp waveform and is capable of bipolar operation, linear interpolation between input data points, extended time range, and cycling; the second generates four independent square waveforms with variable duration and amplitude

  5. The Mathematica programmer

    CERN Document Server

    Maeder, Roman E

    1994-01-01

    The Mathematica Programmer covers the fundamental programming paradigms and applications of programming languages. This book is organized into two parts encompassing 10 chapters. Part 1 begins with an overview of the programming paradigms. This part also treats abstract data types, polymorphism and message passing, object-oriented programming, and relational databases. Part 2 looks into the practical aspects of programming languages, including in lists and power series, fractal curves, and minimal surfaces.This book will prove useful to mathematicians and computer scientists.

  6. The Italian hydrogen programme

    International Nuclear Information System (INIS)

    Raffaele Vellone

    2001-01-01

    Hydrogen could become an important option in the new millennium. It provides the potential for a sustainable energy system as it can be used to meet most energy needs without harming the environment. In fact, hydrogen has the potential for contributing to the reduction of climate-changing emissions and other air pollutants as it exhibits clean combustion with no carbon or sulphur oxide emissions and very low nitrogen oxide emissions. Furthermore, it is capable of direct conversion to electricity in systems such as fuel cells without generating pollution. However, widespread use of hydrogen is not feasible today because of economic and technological barriers. In Italy, there is an ongoing national programme to facilitate the introduction of hydrogen as an energy carrier. This programme aims to promote, in an organic frame, a series of actions regarding the whole hydrogen cycle. It foresees the development of technologies in the areas of production, storage, transport and utilisation. Research addresses the development of technologies for separation and sequestration of CO 2 , The programme is shared by public organisations (research institutions and universities) and national industry (oil companies, electric and gas utilities and research institutions). Hydrogen can be used as a fuel, with significant advantages, both for electric energy generation/ co-generation (thermo-dynamic cycles and fuel cells) and transportation (internal combustion engine and fuel cells). One focus of research will be the development of fuel cell technologies. Fuel cells possess all necessary characteristics to be a key technology in a future economy based on hydrogen. During the initial phase of the project, hydrogen will be derived from fossil sources (natural gas), and in the second phase it will be generated from renewable electricity or nuclear energy. The presentation will provide a review of the hydrogen programme and highlight future goals. (author)

  7. A new video programme

    CERN Multimedia

    CERN video productions

    2011-01-01

    "What's new @ CERN?", a new monthly video programme, will be broadcast on the Monday of every month on webcast.cern.ch. Aimed at the general public, the programme will cover the latest CERN news, with guests and explanatory features. Tune in on Monday 3 October at 4 pm (CET) to see the programme in English, and then at 4:20 pm (CET) for the French version.   var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2011/CERN-MOVIE-2011-129/CERN-MOVIE-2011-129-0753-kbps-640x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-129/CERN-MOVIE-2011-129-Multirate-200-to-753-kbps-640x360-25-fps.wmv', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-129/CERN-MOVIE-2011-129-posterframe-640x360-at-10-percent.jpg', '1383406', true, 'Video/Public/Movies/2011/CERN-MOVIE-2011-129/CERN-MOVIE-2011-129-0600-kbps-maxH-360-25-fps-...

  8. National energy efficiency programme

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper focusses on energy conservation and specifically on energy efficiency which includes efficiency in the production, delivery and utilisation of energy as part of the total energy system of the economy. A National Energy Efficiency Programme is being launched in the Eighth Plan that will take into account both macro level and policy and planning considerations as well as micro level responses for different category of users in the industry, agriculture, transport and domestic sectors. The need for such a National Energy Efficiency Programme after making an assessment of existing energy conservation activities in the country is discussed. The broad framework and contents of the National Energy Efficiency Programme have been outlined and the Eighth Plan targets for energy conservation and their break-up have been given. These targets, as per the Eighth Plan document are 5000 MW in electricity installed capacity and 6 million tonnes of petroleum products by the terminal year of the Eighth Plan. The issues that need to be examined for each sector for achieving the above targets for energy conservation in the Eighth Plan are discussed briefly. They are: (a) policy and planning, (b) implementation arrangements which include the institutional setup and selective legislation, (c) technological requirements, and (d) resource requirements which include human resources and financial resources. (author)

  9. The transport safety programme

    International Nuclear Information System (INIS)

    Selling, H.A.

    1994-01-01

    The transport safety programme is one of the smaller technical sub-programmes in the Radiation Safety Section of the Division of Nuclear Safety, in terms of both regular budget and professional staff allocations. The overall aim of the programme is to promote the safe movement of radioactive material worldwide. The specific objectives are the development, review and maintenance of the Regulations for the Safe Transport of Radioactive Material, Safety Series No 6, and its supporting documents Safety Series Nos 7, 37 and 80 and the assistance to Member States and International Organizations in the proper implementation of the Regulations. One of the important issues that emerged during an ongoing Review/Revision process is the transport of Low-Specific Activity (LSA) material and Surface Contaminated Objects (SCO). Many of the radioactive waste materials fall in one of these categories. The subject has gained substance because it is expected that in the next decade radioactive waste could become available in so far unprecedented quantities and volumes due to decontamination and decommissioning of nuclear facilities. (author)

  10. Environmental monitoring programme

    International Nuclear Information System (INIS)

    1991-08-01

    During 1989 there were about 1000 premises in England and Wales authorised to discharge radioactive wastes. The majority of these premises consisted of hospitals, universities and industrial, research or manufacturing centres. Discharges from these premises when made in accordance with the strict conditions specified in their authorisations will have been of little radiological significance. In the case of nuclear sites authorisations or approvals are issued jointly by the DoE and the Ministry of Agriculture, Fisheries and Food (MAFF) known collectively as the Authorising Departments. In Wales these functions are undertaken by the Welsh Office with the support of HMIP and MAFF. The Authorising Departments specify numerical limits on the amounts of radioactivity which operators may discharge to the environment. In addition operators are required to demonstrate that the best practicable means (BPM) to minimise discharges is undertaken. Operators are also required to carry out appropriate environmental monitoring to demonstrate the effectiveness of BPM. As part of their regulatory functions the Authorising Departments undertake their own environmental monitoring programmes to act as both a check on site operator's returns and to provide independent data on the exposure of the public. HM Inspectorate of Pollution has monitored levels of radioactivity in drinking water sources for many years and published results annually. MAFF undertakes two programmes to monitor radioactivity in the aquatic environment and in terrestrial foodstuffs and publishes annual reports. Environmental monitoring programmes undertaken by both nuclear site operators and government departments are summarised. (author)

  11. Minnesota Local Agency Pavement Marking : Mining Existing Data

    Science.gov (United States)

    2017-11-01

    Pavement marking is important for safety. Maximizing pavement marking performance in terms of increased retroreflectivity, within limited budget constraints, allows agencies to make better decisions toward providing more effective pavement marking pe...

  12. Revised Mark 22 coolant temperature coefficients

    International Nuclear Information System (INIS)

    Graves, W.E.

    1987-01-01

    Coolant temperature coefficients for the Mark 22 charge published previously are non-conservative because of the neglect of a significant mechanism which has a positive contribution to reactivity. Even after correcting for this effect, dynamic tests made on a Mark VIB charge in the early 60's suggest the results are still non-conservative. This memorandum takes both of these sources of information into account in making a best estimate of the prompt (coolant plus metal) temperature coefficient. Although no safety issues arise from this work (the overall temperature coefficient still strongly contributes to reactor stability), it is obviously desirable to use best estimates for prompt coefficients in limits and other calculations

  13. EcoMark 2.0

    DEFF Research Database (Denmark)

    Guo, Chenjuan; Yang, Bin; Andersen, Ove

    2015-01-01

    Eco-routing is a simple yet effective approach to substantially reducing the environmental impact, e.g., fuel consumption and greenhouse gas (GHG) emissions, of vehicular transportation. Eco-routing relies on the ability to reliably quantify the environmental impact of vehicles as they travel...... in a spatial network. The procedure of quantifying such vehicular impact for road segments of a spatial network is called eco-weight assignment. EcoMark 2.0 proposes a general framework for eco-weight assignment to enable eco-routing. It studies the abilities of six instantaneous and five aggregated models......, and experiments for assessing the utility of the impact models in assigning eco-weights. The application of EcoMark 2.0 indicates that the instantaneous model EMIT and the aggregated model SIDRA-Running are suitable for assigning eco-weights under varying circumstances. In contrast, other instantaneous models...

  14. Geologic bench marks by terrestrial photography

    Science.gov (United States)

    Malde, Harold E.

    1973-01-01

    A photograph made with a level camera, if taken at a known height above a permanent mark on the ground, can be later repeated with exactness for measurement of changes in terrain. Such a photograph is one of several means for establishing a geologic bench mark and is especially useful for monitoring the subtle qualities of a landscape that are otherwise hard to map and describe, including the effects of man's use. Moreover, the geometry of such a photograph provides the same angular measurements between objects as can be made with a transit. A measurement of distance on a single photograph, however, requires control points. These can be surveyed at any convenient time, not necessarily when the initial photograph is made. Distances can also be determined by simple stereophotography from a base line of suitable length.

  15. Identification marking by means of laser peening

    Science.gov (United States)

    Hackel, Lloyd A.; Dane, C. Brent; Harris, Fritz

    2002-01-01

    The invention is a method and apparatus for marking components by inducing a shock wave on the surface that results in an indented (strained) layer and a residual compressive stress in the surface layer. One embodiment of the laser peenmarking system rapidly imprints, with single laser pulses, a complete identification code or three-dimensional pattern and leaves the surface in a state of deep residual compressive stress. A state of compressive stress in parts made of metal or other materials is highly desirable to make them resistant to fatigue failure and stress corrosion cracking. This process employs a laser peening system and beam spatial modulation hardware or imaging technology that can be setup to impress full three dimensional patterns into metal surfaces at the pulse rate of the laser, a rate that is at least an order of magnitude faster than competing marking technologies.

  16. Monopoly, Pareto and Ramsey mark-ups

    OpenAIRE

    Ten Raa, T.

    2009-01-01

    Monopoly prices are too high. It is a price level problem, in the sense that the relative mark-ups have Ramsey optimal proportions, at least for independent constant elasticity demands. I show that this feature of monopoly prices breaks down the moment one demand is replaced by the textbook linear demand or, even within the constant elasticity framework, dependence is introduced. The analysis provides a single Generalized Inverse Elasticity Rule for the problems of monopoly, Pareto and Ramsey.

  17. Utilization of Slovenian TRIGA Mark II reactor

    International Nuclear Information System (INIS)

    Snoj, L.; Smodis, B.

    2010-01-01

    TRIGA Mark II research reactor at the Jozef Stefan Institute [JSI] is extensively used for various applications, such as: irradiation of various samples, training and education, verification and validation of nuclear data and computer codes, testing and development of experimental equipment used for core physics tests at a nuclear power plant. The paper briefly describes the aforementioned activities and shows that even such small reactors are still indispensable in nuclear science and technology. (author)

  18. High efficiency metal marking with CO2 laser and glass marking with excimer laser

    DEFF Research Database (Denmark)

    Bastue, Jens; Olsen, Flemmming Ove

    1997-01-01

    with a thoroughly tested ray-tracing model is presented and compared with experimental results. Special emphasis is put on two different applications namely marking in metal with TEA-CO2 laser and marking in glass with excimer laser. The results are evaluated on the basis of the achievable energy enhancement......Today, mask based laser materials processing and especially marking is widely used. However, the energy efficiency in such processes is very low [1].This paper gives a review of the results, that may be obtained using the energy enhancing technique [1]. Results of simulations performed...

  19. Mark Raidpere näitused Pariisis ja Napolis / Mark Raidpere ; interv. Harry Liivrand

    Index Scriptorium Estoniae

    Raidpere, Mark

    2008-01-01

    Mark Raidpere videod "Vekovka", "Dedication / Pühendus", "Majestoso Mystico" näitusel Pariisis Michel Reini galeriis. Osaleb koos saksa fotograafi Sven Johnega näitusel Napolis. Kreekas Thessalonikis valminud filmist "1:1:1"

  20. Nitrogen Research Programme STOP

    International Nuclear Information System (INIS)

    Erisman, J.W.; Van der Eerden, L.

    2000-01-01

    Nitrogen pollution is one of the main threats to the environment now in the Netherlands as well as other parts of Europe. In order to address the main gaps on the issues of nitrogen pollution related to the local scale, the Ministries of Housing, Physical Planning and Environment (VROM) and of Agriculture, Nature Management and Fisheries (LNV) have initiated a research programme, the Dutch Nitrogen Research Programme (STOP), which aims to provide a scientific basis to develop and implement policy on a local scale for the realisation and conservation of the EHS ('Dutch Mainframe of Natural Landscapes'). The results of the programme show that the description of emissions from manure in the field is difficult to describe and show large uncertainties. On the contrary, emissions from housings could be modelled well, if local actual data were available. The OPS model to describe the dispersion and deposition was evaluated with the measurements and the limitations were quantified. It appears that the model works well on the long term, whereas on the short term (hours) and short distance (tenths of meters) there is large uncertainty, especially in complex terrain. Critical loads for nitrogen for ecosystems were evaluated. Furthermore, the effect of management options was quantified. A method to determine critical loads as a function of soil conditions, such as acidification and water availability was derived. This resulted in a combination of the soil model SMART and the so-called 'nature planner' (Natuurplanner). It was concluded that the combination of SMART, the nature planner and OPS provide a good tool to develop and support policy on the local scale. 4 refs

  1. Californium loan programme

    International Nuclear Information System (INIS)

    1974-01-01

    The offer of the United States to loan Californium-252 sources to the IAEA was made by Dr. Glenn T. Seaborg, then chairman of the USAEC, in his opening statement at the 15th. General Conference of the IAEA held in Vienna in 1971. The purpose of this loan was to make neutron emitting sources available to universities in the Member States for use in educational programmes. The sources, in the form of small needles designed for medical use in radiation therapy, were judged highly suitable for didactic applications due to their small size, limited activity and well documented radiological parameters. Subsequently, in May 1973, the Director General announced the availability of the Californium sources to the Member States. To date, numerous sources have been loaned to universities in Czechoslovakia, Costa Rica, the Federal Republic of Germany, Ghana, India, Iran, Israel, Japan, South Africa, Switzerland, the United Kingdom and Uruguay; additional applications for loans are being processed. It is anticipated that the loan programme will be terminated in 1975 once all the available sources have been distributed. n order to provide guidance for the Member States on the safe exploitation of these sources, a prototype use and storage facility was designed by IAEA staff of the Dosimetry Section of the Division of Life Sciences, and constructed at the IAEA laboratory in Seibersdorf, Austria. Figures 2-5 illustrate some of the details of this container, which is being given to the Ghana Nuclear Centre in support of a training programme for students at the university in Accra. Further advice to users of these sources will be provided by the publication of an instructional syllabus, a laboratory manual for experiments and the safety precautions inherent in the proper handling of neutron emitting radionuclides, authored by Professors Erich J. Hall and Harald H. Rossi of Columbia University. The syllabus and manual will be published as part of the IAEA Technical Series in September

  2. Programmable pulse generator

    International Nuclear Information System (INIS)

    Xue Zhihua; Lou Binqiao; Duan Xiaohui

    2002-01-01

    The author introduces the design of programmable pulse generator that is based on a micro-controller and controlled by RS232 interface of personal computer. The whole system has good stability. The pulse generator can produce TTL pulse and analog pulse. The pulse frequency can be selected by EPLD. The voltage amplitude and pulse width of analog pulse can be adjusted by analog switches and digitally-controlled potentiometers. The software development tools of computer is National Instruments LabView5.1. The front panel of this virtual instrumentation is intuitive and easy-to-use. Parameters can be selected and changed conveniently by knob and slide

  3. IUR : organization and programme

    International Nuclear Information System (INIS)

    Myttenaere, C.

    1992-01-01

    I.U.R. is an international Association which aims to promote radioecology by exchange of scientific information, cooperation and the support of young scientists. The organizational chart involves a Board of Council which coordinates the various regional branches headed by a Bureau. Besides this vertical structure, it exists an horizontal one constituted by a series of Working Groups headed by a leader. The I.U.R. also cooperates to international programmes such as, i.e., VAMP (IAEA) and SCOPE-RADPATH. (author)

  4. Research and training programmes

    Directory of Open Access Journals (Sweden)

    Daksha Patel

    2007-03-01

    Full Text Available Research is defined in the Oxford English Dictionary as “a systematic investigation and study of materials and sources in order to establish facts and reach new conclusions.”Research is embedded in the curricula of most postgraduate training programmes; students are expected to complete some form of original work towards a dissertation. This often evokes a range of reactions: “What is the purpose of this exercise? Why do I have to do research when I just want to do a job? Shouldn’t research rather be left to experts? I can’t do the course; I have no research background!”

  5. Accident prevention programme

    International Nuclear Information System (INIS)

    1978-01-01

    This study by the Steel Industry Safety and Health Commission was made within the context of the application by undertakings of the principles of accident and disease prevention previously adopted by the said Commission. It puts forward recommendations for the effective and gradual implementation of a programme of action on occupational health and safety in the various departments of an undertaking and in the undertaking as a whole. The methods proposed in this study are likely to be of interest to all undertakings in the metallurgical industry and other industrial sectors

  6. CASINDO Programme Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Van der Linden, N.; Smekens, K.; Bole-Rentel, T.; Saidi, R. [Unit ECN Policy Studies, Energy research Centre of the Netherlands ECN, Petten (Netherlands); Wijnker, M. [Eindhoven University of Technology TUE, Eindhoven (Netherlands); Kamphuis, E. [ETC Netherlands, Leusden (Netherlands); Winarno, Oetomo Tri [Institute of Technology, Bandung (Indonesia); Permana, Iman [Technical Education Development Centre, Bandung (Indonesia)

    2012-06-15

    The overall objective of the CASINDO programme is to establish a self-sustaining and self-developing structure at both the national and regional level to build and strengthen human capacity to enable the provinces of North Sumatra, Yogyakarta, Central Java, West Nusa Tenggara and Papua to formulate sound policies for renewable energy and energy efficiency and to develop and implement sustainable energy projects. CASINDO stands for Capacity development and strenghtening for energy policy formulation adn implementation of sustainable energy projects in Indonesia.

  7. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1985-05-01

    In the current Fusion Technology Programme of the European Community the KfK association is working at present on 16 R and D contracts. Most of the work is strongly oriented towards the Next European Torus. Direct support to NET is given by three KfK delegates being member of the NET study group. In addition to the R and D contracts the association is working on 11 NET study contracts. Though KfK contributes to all areas defined in fusion technology, the main emphasis is put on superconducting magnet and breeding blanket development. Other important fields are tritium technology, materials research, and remote handling. (orig./GG)

  8. Programme Biology - Health protection

    International Nuclear Information System (INIS)

    1975-01-01

    The scientific results for 1975, of the five-year Biology-Health Protection programme adopted in 1971, are presented in two volumes. In volume one, Research in Radiation Protection are developed exclusively, including the following topics: measurement and interpretation of radiation (dosimetry); transfer of radioactive nuclides in the constituents of the environment; hereditary effects of radiation; short-term effects (acute irradiation syndrome and its treatment); long-term effects and toxicology of radioactive elements. In volume, two Research on applications in Agriculture and Medicine are developed. It includes: mutagenesis; soil-plant relations; radiation analysis; food conservation; cell culture; radioentomology. Research on applications in Medicine include: Nuclear Medicine and Neutron Dosimetry

  9. Flexible programmable logic module

    Science.gov (United States)

    Robertson, Perry J.; Hutchinson, Robert L.; Pierson, Lyndon G.

    2001-01-01

    The circuit module of this invention is a VME board containing a plurality of programmable logic devices (PLDs), a controlled impedance clock tree, and interconnecting buses. The PLDs are arranged to permit systolic processing of a problem by offering wide data buses and a plurality of processing nodes. The board contains a clock reference and clock distribution tree that can drive each of the PLDs with two critically timed clock references. External clock references can be used to drive additional circuit modules all operating from the same synchronous clock reference.

  10. NASCAP programmer's reference manual

    Science.gov (United States)

    Mandell, M. J.; Stannard, P. R.; Katz, I.

    1993-05-01

    The NASA Charging Analyzer Program (NASCAP) is a computer program designed to model the electrostatic charging of complicated three-dimensional objects, both in a test tank and at geosynchronous altitudes. This document is a programmer's reference manual and user's guide. It is designed as a reference to experienced users of the code, as well as an introduction to its use for beginners. All of the many capabilities of NASCAP are covered in detail, together with examples of their use. These include the definition of objects, plasma environments, potential calculations, particle emission and detection simulations, and charging analysis.

  11. Reactor Physics Programme

    International Nuclear Information System (INIS)

    De Raedt, C.

    2000-01-01

    The Reactor Physics and Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis on reactor fuel. This expertise is applied within the Reactor Physics and MYRRHA Research Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments. Progress and achievements in 1999 in the following areas are reported on: (1) investigations on the use of military plutonium in commercial power reactors; (2) neutron and gamma calculations performed for BR-2 and for other reactors; (3) the updating of neutron and gamma cross-section libraries; (4) the implementation of reactor codes; (6) the management of the UNIX workstations; and (6) fuel cycle studies

  12. Canadian programme overview

    International Nuclear Information System (INIS)

    Fluke, R.J.

    1997-01-01

    In a severe accident, hydrogen is released into containment. When it is well mixed, the hydrogen mixture is nonflammable because there is sufficient dilution by the large containment volume. This is the desired end point. However, the release may occur into smaller compartments of containment, stratification may occur, and local pockets of flammable mixtures may arise if hydrogen is released faster than processes that mix and disperse it. Long term hydrogen generation from water radiolysis must also be considered. Hydrogen mitigation and control strategies adopted or considered in Canada include fanforced mixing, glow plug igniters, recombiners, venting through filters, or combinations of these. The Canadian hydrogen programme is focussed on understanding hydrogen combustion behaviour and providing the data needed to demonstrate the adequacy of hydrogen mitigation and control strategies. The programme includes both experimental and modelling components of hydrogen combustion and distribution. Experiments include mixing tests, deflagration tests, diffusion flames, transition from deflagration to detonation, and testing the performance of igniters and recombiners. Modelling is focussing on the GOTHIC code as an industry standard. Detailed three dimensional modelling of gas mixing and combustion are underway, and a code validation matrix is being assembled for validation exercises. Significant progress has been made, highlights from which are being presented at this workshop. (author)

  13. PREPARATION FOR RETIREMENT PROGRAMME

    CERN Multimedia

    Human Resources Division

    2001-01-01

    27 March 2001 from 2.00 p.m. to 5.30 p.m. 28 March 2001 from 2.00 p.m. to 5.30 p.m. 29 March 2001 from 2.00 p.m. to 5.30 p.m. 30 March 2001 from 2.00 p.m. to 4.45 p.m. Auditorium (Main Building) After the success of the preparation seminars held in recent years, it has been decided that the programme should continue. The forthcoming seminar has been prepared in close collaboration with the CERN Pensioners' Association. The programme will be organised over several half-day sessions. Once again this year, a special session will be devoted to the 10th revision of the Swiss state pension scheme, the 'AVS' (Assurance-Vieillesse et Survivants), and the consequences for international civil servants. A talk will be given by Mrs Danièle Siebold, Director of the Caisse Cantonale Genevoise de Compensation, aimed mainly at those residing in or intending to move to Switzerland, or who worked in Switzerland before joining CERN. To enable Mrs Siebold to respond to your concerns as effectively as possible, please ...

  14. Fast reactor programme

    International Nuclear Information System (INIS)

    Plakman, J.C.

    1982-01-01

    This progress report summarizes the fast reactor research carried out by ECN during the period covering the year 1980. This research is mainly concerned with the cores of sodium-cooled breeders, in particular the SNR-300, and its related safety aspects. It comprises six items: A programme to determine relevant nuclear data of fission- and corrosion-products; A fuel performance programme comprising in-pile cladding failure experiments and a study of the consequences of loss-of-cooling and overpower; Basic research on fuel; Investigation of the changes in the mechanical properties of austenitic stainless steel DIN 1.4948 due to fast neutron doses, this material has been used in the manufacture of the reactor vessel and its internal components; Study of aerosols which could be formed at the time of a fast reactor accident and their progressive behaviour on leaking through cracks in the concrete containment; Studies on heat transfer in a sodium-cooled fast reactor core. As fast breeders operate at high power densities, an accurate knowledge of the heat transfer phenomena under single-phase and two-phase conditions is sought. (Auth.)

  15. Nuclear programme in Indonesia

    International Nuclear Information System (INIS)

    Ahimsa, Djali

    1994-01-01

    Implementation of the energy policy covers several aspects such as issuance of regulations, standards, energy pricing incentives and disincentives, and the application of appropriate technologies. The policies and implementation of the technologies can fully be supported by the use of nuclear technology, especially toward the now popular issue concerning the environment. In view of these policies and the need to implement these policies. i.e. for the diversification of energy and environmental concern, the Department of Mines and Energy has established an Indonesian Energy Coordination Board (BAKOREN). This board has realised the importance of considering nuclear as a source of energy, which has led to a decision in September 1989, for The National Atomic Energy Agency (BATAN) to conduct a feasibility study to introduce nuclear power plants in Indonesia. The establishment of an authority for the construction and operation of Nuclear Power Plants in Indonesia, which is primarily related to the safe and efficient operation of nuclear power plants, must also be prepared. This authority is still under considerations by the Indonesian Government. In implementing the Indonesia Nuclear Programme, it is important that cooperation exists among countries of the world, Korea, in this respect, as learning from experiences of other countries are very necessary to plan for a successful Nuclear Programme

  16. Reactor Physics Programme

    Energy Technology Data Exchange (ETDEWEB)

    De Raedt, C

    2000-07-01

    The Reactor Physics and Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis on reactor fuel. This expertise is applied within the Reactor Physics and MYRRHA Research Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments. Progress and achievements in 1999 in the following areas are reported on: (1) investigations on the use of military plutonium in commercial power reactors; (2) neutron and gamma calculations performed for BR-2 and for other reactors; (3) the updating of neutron and gamma cross-section libraries; (4) the implementation of reactor codes; (6) the management of the UNIX workstations; and (6) fuel cycle studies.

  17. Programmable electronic safety systems

    International Nuclear Information System (INIS)

    Parry, R.R.

    1993-01-01

    Traditionally safety systems intended for protecting personnel from electrical and radiation hazards at particle accelerator laboratories have made extensive use of electromechanical relays. These systems have the advantage of high reliability and allow the designer to easily implement fail-safe circuits. Relay based systems are also typically simple to design, implement, and test. As systems, such as those presently under development at the Superconducting Super Collider Laboratory (SSCL), increase in size, and the number of monitored points escalates, relay based systems become cumbersome and inadequate. The move toward Programmable Electronic Safety Systems is becoming more widespread and accepted. In developing these systems there are numerous precautions the designer must be concerned with. Designing fail-safe electronic systems with predictable failure states is difficult at best. Redundancy and self-testing are prime examples of features that should be implemented to circumvent and/or detect failures. Programmable systems also require software which is yet another point of failure and a matter of great concern. Therefore the designer must be concerned with both hardware and software failures and build in the means to assure safe operation or shutdown during failures. This paper describes features that should be considered in developing safety systems and describes a system recently installed at the Accelerator Systems String Test (ASST) facility of the SSCL

  18. Programmable Electronic Safety Systems

    International Nuclear Information System (INIS)

    Parry, R.

    1993-05-01

    Traditionally safety systems intended for protecting personnel from electrical and radiation hazards at particle accelerator laboratories have made extensive use of electromechanical relays. These systems have the advantage of high reliability and allow the designer to easily implement failsafe circuits. Relay based systems are also typically simple to design, implement, and test. As systems, such as those presently under development at the Superconducting Super Collider Laboratory (SSCL), increase in size, and the number of monitored points escalates, relay based systems become cumbersome and inadequate. The move toward Programmable Electronic Safety Systems is becoming more widespread and accepted. In developing these systems there are numerous precautions the designer must be concerned with. Designing fail-safe electronic systems with predictable failure states is difficult at best. Redundancy and self-testing are prime examples of features that should be implemented to circumvent and/or detect failures. Programmable systems also require software which is yet another point of failure and a matter of great concern. Therefore the designer must be concerned with both hardware and software failures and build in the means to assure safe operation or shutdown during failures. This paper describes features that should be considered in developing safety systems and describes a system recently installed at the Accelerator Systems String Test (ASST) facility of the SSCL

  19. Accelerator programme at CAT

    International Nuclear Information System (INIS)

    Ramamurthi, S.S.

    1991-01-01

    The Accelerator Programme at the Centre for Advanced Technology (CAT), Indore, has very broad based concept under which all types of accelerators are to be taken up for design and fabrication. This centre will be housing a wide variety of accelerators to serve as a common facility for the universities, national laboratories in addition to laboratories under the Department of Atomic Energy. In the first phase of the programme, a series of electron accelerators are designed and fabricated. They are synchrotron radiation sources of 450 MeV (INDUS-I) and of 2 GeV (INDUS-II), microtron upto energy of 20 MeV, linear accelerator upto 20 MeV, and DC Accelerator for industrial irradiation upto 750 KeV and 20 KW. A proton accelerator of 300 MeV with 20 MeV linac injector is also designed. CAT is also developing a strong base for support technologies like ultra high vacuum, radio frequency and microwaves, DC pulsed and superconducting magnets, power supplies and controls etc. These technologies are very useful for other industrial applications also. To develop user groups to utilise INDUS-II synchrotron radiation source, a batch production of rotating Anode X-ray generators with power supplies has been initiated. So also, the sputter ion pumps, electron guns, turbo molecular pumps are brought into batch production. (author)

  20. A survival programme

    International Nuclear Information System (INIS)

    Vester, F.

    1978-01-01

    The book is a non-speculative information source on ecological problems and their possible solutions. It is a 'programme' from a twofold point of view: it determines political and scientific-technological objectives and it transfers knowledge by mental steps with techniques of programmed instruction. Thus emphasis is laid on detailed problems, especially by conscionsly challenged redundancies, and, on the other hand, a greater context is presented. Selected facts are examined under their different aspects, interactions and control circuits are described. Each chapter will speak for itself after the introduction has been read but is related to other chapters by cross references, illustrative material, a glossary and a comprehensive list of references. The 'Survival Programme' is a realistic and challenging discussion with the problem of 'Ecology in the Industrial Age'. It adresses scientists from various disciplines but also offers itself as a compendium to laymen in search of information, members of citizens initiatives and responsible representants of the political and industrial world. (orig./HP) [de

  1. Decontamination of TRIGA Mark II reactor, Indonesia

    International Nuclear Information System (INIS)

    Suseno, H.; Daryoko, M.; Goeritno, A.

    2002-01-01

    The TRIGA Mark II Reactor in the Centre for Research and Development Nuclear Technique Bandung has been partially decommissioned as part of an upgrading project. The upgrading project was carried out from 1995 to 2000 and is being commissioned in 2001. The decommissioning portion of the project included disassembly of some components of the reactor core, producing contaminated material. This contaminated material (grid plate, reflector, thermal column, heat exchanger and pipe) will be sent to the Decontamination Facility at the Radioactive Waste Management Development Centre. (author)

  2. The Mark II detector for the SLC

    International Nuclear Information System (INIS)

    Abrams, G.; Baden, A.R.; Boyer, J.; Butler, F.; Drell, P.S.; Fay, J.; Gidal, G.; Goldhaber, G.; Haggerty, J.; Harr, R.; Hearty, C.; Herrup, D.; Holmgren, S.O.; Jaffre, M.; Juricic, I.; Kadyk, J.A.; Kral, J.F.; Levi, M.E.; Lynch, G.R.; Richman, J.D.; Rouse, F.R.; Schaad, M.W.; Schmidke, W.B.; Schumm, B.A.; Trilling, G.H.; Wood, D.R.; Akerlof, C.; Bonvicini, G.; Chapman, J.; Chmeissani, M.; Frey, R.; Gero, E.; Hong, S.J.; Koska, W.; Nitz, D.; Petradza, M.; Thun, R.; Tschirhart, R.; Veltman, H.; Alexander, J.P.; Ballam, J.; Barklow, T.; Bartelt, J.; De Boer, W.; Boyarski, A.; Braune, K.; Bulos, F.; Burke, D.L.; Cords, D.; Coupal, D.P.; Destaebler, H.C.; Dorfan, J.M.; Feldman, G.J.; Fernandes, D.; Field, R.C.; Fordham, C.; Fujino, D.; Gan, K.K.; Glanzman, T.; Grosse-Wiesmann, P.; Hanson, G.; Hayes, K.; Himel, T.; Hutchinson, D.; Innes, W.R.; Jacobsen, R.G.; Jaros, J.A.; Jung, C.K.; Karlen, D.; Klein, S.R.; Koetke, D.; Komamiya, M.; Kowalski, L.A.; Kozanecki, W.; Lankford, A.J.; Larsen, R.R.; Lueth, V.; Mattison, T.; Moffeit, K.C.; Mueller, L.; Munger, C.T.; Nash, J.; Ong, R.A.; O'Shaughnessy, K.F.; Perl, J.; Perl, M.L.; Perrier, F.; Petersen, A.; Pitthan, R.; Riles, K.; Swartz, M.; Taylor, R.E.; Van Kooten, R.; Voruganti, P.; Weigend, A.; Woods, M.; Wormser, G.; Wright, R.; Alvarez, M.; Calvino, F.; Fernandez, E.; Ford, W.T.; Hinshaw, D.A.; Rankin, P.; Smith, J.G.; Wagner, S.R.; Weber, P.; White, S.L.; Averill, D.; Blockus, D.; Brabson, B.; Brom, J.M.; Murray, W.N.; Ogren, H.; Rust, D.R.; Snyder, A.; Yurko, M.; Barish, B.C.; Hawkes, C.M.; Hoenk, M.; Kuhlen, M.; Li, Z.; McKenna, J.A.; Milliken, B.D.; Nelson, M.E.; Peck, C.; Porter, F.C.; Soderstrom, E.; Stroynowski, R.; Weinstein, A.J.; Weir, A.J.; Wicklund, E.; Wolf, R.C.; Wu, D.Y.; Barnett, B.A.; Boswell, C.; Dauncey, P.; Drewer, D.C.; Harral, B.; Hylen, J.; Matthews, J.A.J.; Stoker, D.P.; Vejcik, S.; Breakstone, A.; Cence, R.J.; Gong, X.; Harris, F.A.; Koide, A.; Parker, S.I.; Green, A.; Lawrence Berkeley Lab., CA; California Univ., Berkeley

    1989-01-01

    The Mark II detector has been upgraded in preparation for its role as the first detector to take data at the Stanford Linear Collider. The new detector components include the central drift chamber, the time-of-flight system, the coil, the endcap electromagnetic calorimeters and the beam energy and luminosity measuring devices. There have also been improvements in detector hermeticity. All of the major components were installed for a test run at the PEP storage ring (√s=29 GeV) in 1985. This paper describes the upgraded detector, including its trigger and data acquisition systems, and gives performance figures for its components. Future improvements are also discussed. (orig.)

  3. Kuosheng Mark III containment analyses using GOTHIC

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Ansheng, E-mail: samuellin1999@iner.gov.tw; Chen, Yen-Shu; Yuann, Yng-Ruey

    2013-10-15

    Highlights: • The Kuosheng Mark III containment model is established using GOTHIC. • Containment pressure and temperature responses due to LOCA are presented. • The calculated results are all below the design values and compared with the FSAR results. • The calculated results can be served as an analysis reference for an SPU project in the future. -- Abstract: Kuosheng nuclear power plant in Taiwan is a twin-unit BWR/6 plant, and both units utilize the Mark III containment. Currently, the plant is performing a stretch power uprate (SPU) project to increase the core thermal power to 103.7% OLTP (original licensed thermal power). However, the containment response in the Kuosheng Final Safety Analysis Report (FSAR) was completed more than twenty-five years ago. The purpose of this study is to establish a Kuosheng Mark III containment model using the containment program GOTHIC. The containment pressure and temperature responses under the design-basis accidents, which are the main steam line break (MSLB) and the recirculation line break (RCLB) accidents, are investigated. Short-term and long-term analyses are presented in this study. The short-term analysis is to calculate the drywell peak pressure and temperature which happen in the early stage of the LOCAs. The long-term analysis is to calculate the peak pressure and temperature of the reactor building space. In the short-term analysis, the calculated peak drywell to wetwell differential pressure is 140.6 kPa for the MSLB, which is below than the design value of 189.6 kPa. The calculated peak drywell temperature is 158 °C, which is still below the design value of 165.6 °C. In addition, in the long-term analysis, the calculated peak containment pressure is 47 kPa G, which is below the design value of 103.4 kPa G. The calculated peak values of containment temperatures are 74.7 °C, which is lower than the design value of 93.3 °C. Therefore, the Kuosheng Mark III containment can maintain the integrity after

  4. MARK II end cap calorimeter electronics

    International Nuclear Information System (INIS)

    Jared, R.C.; Haggerty, J.S.; Herrup, D.A.; Kirsten, F.A.; Lee, K.L.; Olson, S.R.; Wood, D.R.

    1985-10-01

    An end cap calorimeter system has been added to the MARK II detector in preparation for its use at the SLAC Linear Collider. The calorimeter uses 8744 rectangular proportional counter tubes. This paper describes the design features of the data acquisition electronics that has been installed on the calorimeter. The design and use of computer-based test stands for the amplification and signal-shaping components is also covered. A portion of the complete system has been tested in a beam at SLAC. In these initial tests, using only the calibration provided by the test stands, a resolution of 18%/√E was achieved

  5. 46 CFR 78.50-5 - Hull markings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Hull markings. 78.50-5 Section 78.50-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Markings on Vessels § 78.50-5 Hull markings. Vessels shall be marked as required by parts 67 and 69 of this chapter. [CGD 72...

  6. 46 CFR 196.40-5 - Hull markings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Hull markings. 196.40-5 Section 196.40-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS OPERATIONS Markings on Vessels § 196.40-5 Hull markings. Vessels shall be marked as required by parts 67 and 69 of this chapter...

  7. 46 CFR 97.40-5 - Hull markings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Hull markings. 97.40-5 Section 97.40-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS OPERATIONS Markings on Vessels § 97.40-5 Hull markings. Vessels shall be marked as required by parts 67 and 69 of this...

  8. Circulatory Markings at Double-Lane Traffic Roundabout.

    NARCIS (Netherlands)

    Bie, Jing; Lo, Hong K.; Wong, S.C.

    2008-01-01

    This paper compares two types of circulatory markings at a double-lane traffic roundabout: the concentric marking scheme and the Alberta marking scheme. The effects of these two marking schemes on drivers' lane choice behavior, delay, and safety, are compared based on data collected from before and

  9. Finnish energy technology programmes 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    The Finnish Technology Development Centre (Tekes) is responsible for the financing of research and development in the field of energy production technology. A considerable part of the financing goes to technology programmes. Each technology programme involves major Finnish institutions - companies, research institutes, universities and other relevant interests. Many of the energy technology programmes running in 1998 were launched collectively in 1993 and will be completed at the end of 1998. They are complemented by a number of other energy-related technology programmes, each with a timetable of its own. Because energy production technology is horizontal by nature, it is closely connected with research and development in other fields, too, and is an important aspect in several other Tekes technology programmes. For this reason this brochure also presents technology programmes where energy is only one of the aspects considered but which nevertheless contribute considerably to research and development in the energy production sector

  10. Postgraduate programme in tissue banking

    International Nuclear Information System (INIS)

    Yongyudh Vajaradul

    1999-01-01

    In 1992 in the Project Formulation Meeting of IAEA, the masters degree programme was proposed by Dr. Youngyudh Vajaradul, Thailand to upgrade the personnel of tissue bank and the person who had been working and involving in tissue banking. After The Bangkok Biomaterial Center proposed the degree programme and presented to Mahidol University, this programme was accepted by Ministry of University Affairs in 1998 and the masters degree programme under the name of 'Masters of Science in Biomaterial for Implantation' will be started in April 1999. IAEA will support the fellowship candidates from the region to study in masters degree programme. The programme includes 6 months of course work in Bangkok that is 12 credits and 24 is for the dissertation work which would be done in any country. The time of validity is 5 years

  11. 1L Mark-IV Target Design Review

    Energy Technology Data Exchange (ETDEWEB)

    Koehler, Paul E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-16

    This presentation includes General Design Considerations; Current (Mark-III) Lower Tier; Mark-III Upper Tier; Performance Metrics; General Improvements for Material Science; General Improvements for Nuclear Science; Improving FOM for Nuclear Science; General Design Considerations Summary; Design Optimization Studies; Expected Mark-IV Performance: Material Science; Expected Mark-IV Performance: Nuclear Science (Disk); Mark IV Enables Much Wider Range of Nuclear-Science FOM Gains than Mark III; Mark-IV Performance Summary; Rod or Disk? Center or Real FOV?; and Project Cost and Schedule.

  12. Nuclear particle track-etched anti-bogus mark

    International Nuclear Information System (INIS)

    He Xiangming; Yan Yushun; Zhang Quanrong

    2003-01-01

    Nuclear particle track-etched anti-bogus mark is a new type of forgery-proof product after engraving gravure printing, thermocolour, fluorescence, laser hologram and metal concealed anti-bogus mark. The mark is manufactured by intricate high technology and the state strictly controlled sensitive nuclear facilities to ensure the mark not to be copied. The pattern of the mark is specially characterized by permeability of liquid to be discriminated from forgery. The genuine mark can be distinguished from sham one by transparent liquid (e.g. water), colorful pen and chemical reagent. The mark has passed the official examination of health safety. It is no danger of nuclear irradiation. (author)

  13. Radiation research: the European programme

    International Nuclear Information System (INIS)

    Gerber, G.B.

    1985-01-01

    A summary is given of an oral presentation on the European Community's Radiation Protection Programme. Aspects of the programme discussed included its development which began 25 years ago, the administrative structure, the financial success and the funding for 1985/89. Finally, the six subject sectors of the programme were discussed, giving a broad description of where the emphases had been laid and how each sector had fared. (U.K.)

  14. The European fusion technology programme

    International Nuclear Information System (INIS)

    Goedkoop, J.A.

    1984-01-01

    With the 1982-86 pluriannual programme, reactor technology became a separate chapter in the fusion research programme of the European Commission. It comprises work on materials, the breeder blanket, tritium management, magnet coils, maintenance and the safety and environmental aspects. After an overview of the programme each of these areas is discussed briefly and some remarks are made on the role played by the European fission energy and magnet laboratories. (author)

  15. Programmable pH buffers

    Science.gov (United States)

    Gough, Dara Van; Huber, Dale L.; Bunker, Bruce C.; Roberts, Mark E.

    2017-01-24

    A programmable pH buffer comprises a copolymer that changes pK.sub.a at a lower critical solution temperature (LCST) in water. The copolymer comprises a thermally programmable polymer that undergoes a hydrophobic-to-hydrophilic phase change at the LCST and an electrolytic polymer that exhibits acid-base properties that are responsive to the phase change. The programmable pH buffer can be used to sequester CO.sub.2 into water.

  16. Principals, agents and research programmes

    OpenAIRE

    Elizabeth Shove

    2003-01-01

    Research programmes appear to represent one of the more powerful instruments through which research funders (principals) steer and shape what researchers (agents) do. The fact that agents navigate between different sources and styles of programme funding and that they use programmes to their own ends is readily accommodated within principal-agent theory with the help of concepts such as shirking and defection. Taking a different route, I use three examples of research programming (by the UK, ...

  17. CAMAC modular programmable function generator

    Energy Technology Data Exchange (ETDEWEB)

    Turner, G.W.; Suehiro, S.; Hendricks, R.W.

    1980-12-01

    A CAMAC modular programmable function generator has been developed. The device contains a 1024 word by 12-bit memory, a 12-bit digital-to-analog converter with a 600 ns settling time, an 18-bit programmable frequency register, and two programmable trigger output registers. The trigger registers can produce programmed output logic transitions at various (binary) points in the output function curve, and are used to synchronize various other data acquisition devices with the function curve.

  18. CAMAC modular programmable function generator

    International Nuclear Information System (INIS)

    Turner, G.W.; Suehiro, S.; Hendricks, R.W.

    1980-12-01

    A CAMAC modular programmable function generator has been developed. The device contains a 1024 word by 12-bit memory, a 12-bit digital-to-analog converter with a 600 ns settling time, an 18-bit programmable frequency register, and two programmable trigger output registers. The trigger registers can produce programmed output logic transitions at various (binary) points in the output function curve, and are used to synchronize various other data acquisition devices with the function curve

  19. Cigotica programme: pediatric experiences

    Directory of Open Access Journals (Sweden)

    Lešović Snežana

    2011-01-01

    Full Text Available Introduction The alarming spread of obesity epidemic in children and adolsecents, as well as the absence of tested and efficient measures and programmes on obesity preven­tion indicate the necessity for the establishment of the Centre for the prevention, treatment and rehabilitation of obesity in children and adolescents and the 'Cigotica Programme' at the Special Hospital 'Zlatibor'. The advantage of the 'Cigotica' Programme is the multidisciplinary approach to treating obese children, which implies specific education, dietetic interventions with the reduction in the total daily calorie intake, physical activity, medical, educational and psychological support, change of behavior and lifestyle. Objective To define obesity complications, metabolic risk factors and treatment effects on body composition and metabolic parameters in adolescents participating in the 'Cigotica' Programme. Method 1,030 adolescents were examined (498 girls and 532 boys, aged 12 to 18, average age 15.45, diagnosed with primary obesity, hospitalized at the Centre for the prevention, treatment and rehabilitation of obesity in children and adolescents at the Special Hospital 'Zlatibor', in the period from 27/07/2008 to 03/10/2010. Hospitalization lasted 21 days. Obesity criterion was body mass index (BMI > +2 SD . Body The Special Hospital for the Thyroid Gland and Metabolism Zlatibor mass, BMI, % of fat were obtained by means of Tanita scales for determining body composition using the impendence method. Apart from medical examination, blood pressure was also taken. The levels of triglycerides, total HDL and LDL cholesterols, uric acids and glycemia were determined on the second and twenty-first day of hospitalization after a 12-day fasting period. Results After the multidisciplinary treatment, the average reduction in body mass (p< 0.05 in all adolescents was 5.92 ± 2.71 kg, in boys - 6.24 ±3.24 kg, and in girls -5.86±2.4. During the 21-day hospitalization, the average

  20. Deposition in St. Mark's Basilica of Venice.

    Science.gov (United States)

    Morabito, E; Zendri, E; Piazza, R; Ganzerla, R; Montalbani, S; Marcoleoni, E; Bonetto, F; Scandella, A; Barbante, C; Gambaro, A

    2013-04-01

    Atmospheric pollutants may cause damage to monuments and historical buildings. Besides air contaminants, soluble salts are also responsible for stone deterioration and decay in outdoor and indoor monuments. The problem of how to conserve works of arts thus requires a deep knowledge of contaminants' concentration and distribution inside buildings. In this work, water-soluble ions inside St. Mark's Basilica in Venice were studied, with the aim of understanding their principal source and distribution inside the building. With the aid of Fourier transform infrared spectroscopy and scanning electron microscopy analysis, the interaction between ions and surface's material was also investigated. Ion chromatographic analysis of depositions highlighted a large amount of "deteriorating agents" such as sulphates and chlorides. A possible source in the innermost area of the basilica has been found for formates and nitrates. On the contrary, a decrease of chloride, from the entrance to the innermost area, has been found, which indicates that the source is outside the building. It is emphasized that different contaminants behave differently on different material, and the effect of pollution inside churches and monuments is not easy to predict. Wood and brick seem to react differently than stone and mortar to the damaging action of salts and pollutants. The present work should be considered a useful tool for the future preservation of St. Mark's Basilica in Venice.

  1. The Five Marks of the Mental

    Science.gov (United States)

    Pernu, Tuomas K.

    2017-01-01

    The mental realm seems different to the physical realm; the mental is thought to be dependent on, yet distinct from the physical. But how, exactly, are the two realms supposed to be different, and what, exactly, creates the seemingly insurmountable juxtaposition between the mental and the physical? This review identifies and discusses five marks of the mental, features that set characteristically mental phenomena apart from the characteristically physical phenomena. These five marks (intentionality, consciousness, free will, teleology, and normativity) are not presented as a set of features that define mentality. Rather, each of them is something we seem to associate with phenomena we consider mental, and each of them seems to be in tension with the physical view of reality in its own particular way. It is thus suggested how there is no single mind-body problem, but a set of distinct but interconnected problems. Each of these separate problems is analyzed, and their differences, similarities and connections are identified. This provides a useful basis for future theoretical work on psychology and philosophy of mind, that until now has too often suffered from unclarities, inadequacies, and conflations. PMID:28736537

  2. Iran's nuclear power programme revisited

    International Nuclear Information System (INIS)

    Mossavar-Rahmani, B.

    1980-01-01

    Iran's new government has not yet made a final decision about the fate of that country's once ambitious nuclear power programme. If the programme is kept alive, it will be limited to the completion of at most one or two of the reactors that were already well underway when the revolution broke out. The author traces the origins and growth of the Iranian nuclear power programme between 1974 and 1978, summarizes the principal economic, infrastructural, and political criticisms of the programme as originally planned, discusses the potential for greater use of natural gas as an alternative and, finally, recommends a long, detailed reassessment of Iran's energy options. (author)

  3. UN agencies mark Chernobyl anniversary with launch of US$2.5-million project

    International Nuclear Information System (INIS)

    2009-01-01

    On the 24th of April 2009 four United Nations agencies marked the 23rd anniversary of the Chernobyl nuclear accident by launching a $2.5 million programme designed to meet the priority information needs of affected communities in Belarus, the Russian Federation, and Ukraine. Funded by the UN Trust Fund for Human Security, this three-year initiative aims to translate the latest scientific information on the consequences of the accident into sound practical advice for residents of the affected territories. The project is a joint effort by the International Atomic Energy Agency (IAEA), the United Nations Development Programme (UNDP), the United Nations Children's Fund (UNICEF), and the World Health Organization (WHO)

  4. Evaluation of copper for divider subassembly in MCO Mark IA and Mark IV scrap fuel baskets

    International Nuclear Information System (INIS)

    Graves, C.E.

    1997-01-01

    The K Basin Spent Nuclear Fuel (SNF) Project Multi-Canister Overpack (MCO) subprojection eludes the design and fabrication of a canister that will be used to confine, contain, and maintain fuel in a critically safe array to enable its removal from the K Basins, vacuum drying, transport, staging, hot conditioning, and interim storage (Goldinann 1997). Each MCO consists of a shell, shield plug, fuel baskets (Mark IA or Mark IV), and other incidental equipment. The Mark IA intact and scrap fuel baskets are a safety class item for criticality control and components necessary for criticality control will be constructed from 304L stainless steel. It is proposed that a copper divider subassembly be used in both Mark IA and Mark IV scrap baskets to increase the safety basis margin during cold vacuum drying. The use of copper would increase the heat conducted away from hot areas in the baskets out to the wall of the MCO by both radiative and conductive heat transfer means. Thus copper subassembly will likely be a safety significant component of the scrap fuel baskets. This report examines the structural, cost and corrosion consequences associated with using a copper subassembly in the stainless steel MCO scrap fuel baskets

  5. ATLAS Upgrade Programme

    CERN Document Server

    Hillier, S J; The ATLAS collaboration

    2012-01-01

    With the already outstanding LHC luminosity performance, and planned LHC upgrades in the upcoming shutdowns, it is expected that within a short time-scale, the general purpose LHC experiments will have to cope with luminosities beyond their original design. In order to maintain detector performance and sensitivity to expected and new physics processes, ATLAS has defined a continuous upgrade programme which foresees staged enhancements during the next 10 years of operation, and then more widespread changes before the transition to the highest luminosities after 2022. This talk will describe several components of the ATLAS upgrade, focusing in particular on the Inner Detector and Trigger. The Inner Detector faces two challenges in the higher luminosity environment: high particle multiplicities and increased radiation dose. These will be addressed in the short term by a new layer of Pixel detectors, and in the long term by a complete replacement. The Trigger faces an increasingly difficult task of distinguishing...

  6. Photovoltaic programme - edition 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This publication issued by the Swiss Federal Office of Energy's Photovoltaics (PV) Programme presents an overview (in English) of activities and projects in the photovoltaics research and pilot and demonstration area in Switzerland. Progress in the area of future solar cell technologies, modules and building integration, system technologies, planning and operating aids is summarised. Also, PV for applications in developing countries, thermo-photovoltaics and international co-operation are commented on. In the area of pilot and demonstration projects, component development, PV integration in sloping roofs, on flat roofs and noise barriers as well as further PV plant are looked at. Also, measurement campaigns, studies, statistics and further PV-related topics are summarised. This volume also presents the abstracts of reports made by the project managers of 73 research and pilot and demonstration projects in these areas for 2002.

  7. Canada's nuclear power programme

    International Nuclear Information System (INIS)

    Peden, W.

    1976-01-01

    Although Canada has developed the CANDU type reactor, and has an ambitious programme of nuclear power plant construction, there has been virtually no nuclear controversy. This progress was seen as a means to bring Canada out of the 'resource cow' era, and onto a more equal footing with technologically elite nations. However the Indian nuclear explosion test, waste storage problems, contamination problems arising from use of uranium ore processing waste as land fill and subsidised sale of nuclear power plants to Argentina and South Korea have initiated public and parliamentary interest. Some economists have also maintained that Canada is approaching over-supply of nuclear power and over-investment in plant. Canada has no official overall energy production plan and alternative sources have not been evaluated. (JIW)

  8. Country programme review Bangladesh

    International Nuclear Information System (INIS)

    Kamel, R.; Maluszynski, Y.; Maudarbocus, Y.; Cherif, H.S.; Morre, P.

    1993-12-01

    A five-expert mission was organized from 21-26 August 1993 and this document reflects the findings and recommendations of the team. Intensive contacts with heads of institutions, scientists and decision making persons in various sectors in the country were co-ordinated by the Bangladesh Atomic Energy Commission. The terms of reference of the mission were: To assess the on-going TC projects; to assist the Bangladesh nationals to finalize the formulation of the new requests for 1995-96 TC programme and to establish priority areas with regard to the introduction of national projects involving accelerated technological transfer in order to catalyze national development plans in specific areas; to examine institutional framework suitable for the introduction of these priority nuclear techniques

  9. Photovoltaic programme - edition 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This publication issued by the Swiss Federal Office of Energy's Photovoltaics (PV) Programme presents an overview (in English) of activities and projects in the photovoltaics research and pilot and demonstration area in Switzerland. Progress in the area of future solar cell technologies, modules and building integration, system technologies, planning and operating aids is summarised. Also, PV for applications in developing countries, thermo-photovoltaics and international co-operation are commented on. In the area of pilot and demonstration projects, component development, PV integration in sloping roofs, on flat roofs and noise barriers as well as further PV plant are looked at. Also, measurement campaigns, studies, statistics and further PV-related topics are summarised. This volume also presents the abstracts of reports made by the project managers of 73 research and pilot and demonstration projects in these areas for 2002.

  10. Programmable ferroelectric tunnel memristor

    Directory of Open Access Journals (Sweden)

    Andy eQuindeau

    2014-02-01

    Full Text Available We report an analogously programmable memristor based on genuine electronic resistive switching combining ferroelectric switching and electron tunneling. The tunnel current through an 8 unit cell thick epitaxial Pb(Zr[0.2]Ti[0.8]O[3] film sandwiched between La[0.7]Sr[0.3]MnO[3] and cobalt electrodes obeys the Kolmogorov-Avrami-Ishibashi model for bidimensional growth with a characteristic switching time in the order of 10^-7 seconds. The analytical description of switching kinetics allows us to develop a characteristic transfer function that has only one parameter viz. the characteristic switching time and fully predicts the resistive states of this type of memristor.

  11. FGI - Programme 2: RADIOECOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    Deville-Cavelin, G. [Institut de Radioprotection et de Surete Nucleaire, IRSN, B.P. 17, F - 92262 Fontenay-aux-Roses Cedex (France); Biesold, H. [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH, GRS, Schwertnergasse 1, D - 50667 Koeln (Germany); Chabanyuk, V. [Radioactive Waste and Radioecology, Department Chernobyl Center for Nuclear Safety, Chernobylsk (Ukraine)

    2003-07-01

    The main purpose of the RADIOECOLOGY Program focuses on studying the radioecological consequences of the accident mainly in the Kyiv, Zhytomyr regions of Ukraine, Gomel, Mogilev regions of Belarus and Bryansk, Kaluga regions of Russia. The results of solutions of tasks presented below are integrated into the geographic and technical Radio Ecological Database After Chernobyl, REDAC. This database we be used for the subsequent study of the impacts, for modeling, and for the development of strategies for the waste control and counter measures. The following task of the programme are highlighted: ecological portrait; contamination; wastes dumps and operational database; radionuclide transfers from soil to plants, by surfaces run off, in aquatic environment and from plants to animals; urban environment, implying modeling transfers and countermeasures; countermeasures in natural and agricultural areas.

  12. Differential Signature of the Centrosomal MARK4 Isoforms in Glioma

    Directory of Open Access Journals (Sweden)

    Ivana Magnani

    2011-01-01

    Full Text Available Background: MAP/microtubule affinity-regulating kinase 4 (MARK4 is a serine-threonine kinase expressed in two spliced isoforms, MARK4L and MARK4S, of which MARK4L is a candidate for a role in neoplastic transformation. Methods: We performed mutation analysis to identify sequence alterations possibly affecting MARK4 expression. We then investigated the MARK4L and MARK4S expression profile in 21 glioma cell lines and 36 tissues of different malignancy grades, glioblastoma-derived cancer stem cells (GBM CSCs and mouse neural stem cells (NSCs by real-time PCR, immunoblotting and immunohistochemistry. We also analyzed the sub-cellular localisation of MARK4 isoforms in glioma and normal cell lines by immunofluorescence. Results: Mutation analysis rules out sequence variations as the cause of the altered MARK4 expression in glioma. Expression profiling confirms that MARK4L is the predominant isoform, whereas MARK4S levels are significantly decreased in comparison and show an inverse correlation with tumour grade. A high MARK4L/MARK4S ratio also characterizes undifferentiated cells, such as GBM CSCs and NSCs. Accordingly, only MARK4L is expressed in brain neurogenic regions. Moreover, while both MARK4 isoforms are localised to the centrosome and midbody in glioma and normal cells, the L isoform exhibits an additional nucleolar localisation in tumour cells. Conclusions: The observed switch towards MARK4L suggests that the balance between the MARK4 isoforms is carefully guarded during neural differentiation but may be subverted in gliomagenesis. Moreover, the MARK4L nucleolar localisation in tumour cells features this MARK4 isoform as a nucleolus-associated tumour marker.

  13. Decommissioning of TRIGA Mark II type reactor

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Dooseong; Jeong, Gyeonghwan; Moon, Jeikwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-10-15

    The first research reactor in Korea, KRR 1, is a TRIGA Mark II type with open pool and fixed core. Its power was 100 kWth at its construction and it was upgraded to 250 kWth. Its construction was started in 1957. The first criticality was reached in 1962 and it had been operated for 36,000 hours. The second reactor, KRR 2, is a TRIGA Mark III type with open pool and movable core. These reactors were shut down in 1995, and the decision was made to decommission both reactors. The aim of the decommissioning activities is to decommission the KRR 2 reactor and decontaminate the residual building structures and site, and to release them as unrestricted areas. The KRR 1 reactor was decided to be preserve as a historical monument. A project was launched for the decommissioning of these reactors in 1997, and approved by the regulatory body in 2000. A total budget for the project was 20.0 million US dollars. It was anticipated that this project would be completed and the site turned over to KEPCO by 2010. However, it was discovered that the pool water of the KRR 1 reactor was leaked into the environment in 2009. As a result, preservation of the KRR 1 reactor as a monument had to be reviewed, and it was decided to fully decommission the KRR 1 reactor. Dismantling of the KRR 1 reactor takes place from 2011 to 2014 with a budget of 3.25 million US dollars. The scope of the work includes licensing of the decommissioning plan change, removal of pool internals including the reactor core, removal of the thermal and thermalizing columns, removal of beam port tubes and the aluminum liner in the reactor tank, removal of the radioactive concrete (the entire concrete structure will not be demolished), sorting the radioactive waste (concrete and soil) and conditioning the radioactive waste for final disposal, and final statuses of the survey and free release of the site and building, and turning over the site to KEPCO. In this paper, the current status of the TRIGA Mark-II type reactor

  14. Fast track-finding trigger processor for the SLAC/LBL Mark II Detector

    International Nuclear Information System (INIS)

    Brafman, H.; Breidenbach, M.; Hettel, R.; Himel, T.; Horelick, D.

    1977-10-01

    The SLAC/LBL Mark II Magnetic Detector consists of various particle detectors arranged in cylindrical symmetry located in and around an axial magnetic field. A versatile, programmable secondary trigger processor was designed and built to find curved tracks in the detector. The system operates at a 10 MHz clock rate with a total processing time of 34 μsec and is used to ''trigger'' the data processing computer, thereby rejecting background and greatly improving the data acquisition aspects of the detector-computer combination

  15. Aluminum-Oxide Temperatures on the Mark VB, VE, VR, 15, and Mark 25 Assemblies

    International Nuclear Information System (INIS)

    Aleman, S.E.

    2001-01-01

    The task was to compute the maximum aluminum-oxide and oxide-coolant temperatures of assemblies cladded in 99+ percent aluminum. The assemblies considered were the Mark VB, VE, V5, 15 and 25. These assemblies consist of nested slug columns with individual uranium slugs cladded in aluminum cans. The CREDIT code was modified to calculate the oxide film thickness and the aluminum-oxide temperature at each axial increment. This information in this report will be used to evaluate the potential for cladding corrosion of the Mark 25 assembly

  16. Oxygen binding to nitric oxide marked hemoglobin

    International Nuclear Information System (INIS)

    Louro, S.R.W.; Ribeiro, P.C.; Bemski, G.

    1979-04-01

    Electron spin resonance spectra of organic phosphate free human hemoglobin marked with nitric oxide at the sixth coordination position of one of the four hemes allow to observe the transition from the tense (T) to the relaxed (R) conformation, as a function of parcial oxygen pressure. The spectra are composites of contributions from α sub(T), α sub(R) and β chains spectra, showing the presence of only two conformations: T and R. In the absence of organic phosphates NO binds to α and β chains with the same probability, but in the presence of phosphates NO combines preferentially with α chains. The dissociation of NO proceeds at least an order of magnitude faster in T than in R configuration. (author) [pt

  17. Results on the iota from Mark III

    International Nuclear Information System (INIS)

    Richman, J.D.

    1985-01-01

    A survey is presented of Mark III results on the iota(1440), a possible glueball state observed in radiative J/psi decays. The measurements include a spin-parity determination using both the iota → Ksub(s) 0 K +- π +- and iota → K + K - π 0 decay modes; an upper limit on the K*anti-K content of the Kanti-Kπ Dalitz plot; branching fractions and isospin; stringent upper limits for several hadronic channels, including iota → zetaπ→etaππ; and results from a search for iota radiative decays into vector mesons. These measurements are discussed in the context of theoretical ideas about the iota and results on the E(1420), a state observed in hadronic interactions. 11 refs., 7 figs

  18. Decommissioning plan for the TRIGA mark-3

    International Nuclear Information System (INIS)

    Park, S. K.; Jung, W. S.; Jung, K. H.; Baek, S. T.; Jung, K. J.

    1999-01-01

    TRIGA Mark-III (KRR-2) is the second research reactor in Korea. Construction of KRR-2 was started in 1969 and first criticality was achieved in 1972. After 24 years operation, KRR-2 has stopped its operation at the end of 1995 due to normal operation of HANARO. KRR-2 was then decided to decommission in 1996 by government. Decontamination and decommissioning (D and D) will be conducted in accordance with domestic laws and international regulations. Selected method of D and D will be devoted to protect workers and environment and to minimize radioactive wastes produced. The major D and D work will be conducted safely by using conventional industrial equipment because of relatively low radioactivity and contamination in the facility. When removing activated concrete from reactor pool, it will be installed a temporary containment and ventilation system. In this paper, structure of KRR-2 and method of D and D in each step are presented and discussed

  19. Dihydralazine induces marked cerebral vasodilation in man

    DEFF Research Database (Denmark)

    Schroeder, T; Sillesen, H

    1987-01-01

    of dihydralazine was of the same order of magnitude as the effect of 5% CO2 inhalation. These results in normal subjects should be extrapolated to diseased persons only with extreme caution. Still, the very marked and long lasting vasodilation observed suggests that dihydralazine, from a theoretical point of view.......v. xenon-133 technique in seven young, normotensive volunteers before and 15, 60 and 180 min after 6.25 mg i.v. dihydralazine, corresponding approximately to 0.1 mg kg-1 body weight. For comparison the CBF reactivity to inhalation of 5% CO2 in air was investigated. Dihydralazine increased CBF throughout...... the period of study, in median 16, 27 and 23% at the three periods of measurements, respectively. The arterial blood pressure remained unchanged, whereas heart rate increased significantly. During CO2 inhalation, CBF increased on average 29%. Thus, the cerebral vasodilation exerted by a small i.v. dose...

  20. Programmable architecture for quantum computing

    NARCIS (Netherlands)

    Chen, J.; Wang, L.; Charbon, E.; Wang, B.

    2013-01-01

    A programmable architecture called “quantum FPGA (field-programmable gate array)” (QFPGA) is presented for quantum computing, which is a hybrid model combining the advantages of the qubus system and the measurement-based quantum computation. There are two kinds of buses in QFPGA, the local bus and

  1. Picosecond resolution programmable delay line

    International Nuclear Information System (INIS)

    Suchenek, Mariusz

    2009-01-01

    The note presents implementation of a programmable delay line for digital signals. The tested circuit has a subnanosecond delay range programmable with a resolution of picoseconds. Implementation of the circuit was based on low-cost components, easily available on the market. (technical design note)

  2. General purpose programmable accelerator board

    Science.gov (United States)

    Robertson, Perry J.; Witzke, Edward L.

    2001-01-01

    A general purpose accelerator board and acceleration method comprising use of: one or more programmable logic devices; a plurality of memory blocks; bus interface for communicating data between the memory blocks and devices external to the board; and dynamic programming capabilities for providing logic to the programmable logic device to be executed on data in the memory blocks.

  3. STREAMS - Technology Programme. Yearbook 2003

    International Nuclear Information System (INIS)

    2003-01-01

    The STREAMS Technology Programme addresses municipal waste. Municipal waste is composed of waste from households and small businesses. The programme focuses on five areas Waste prevention, Collection, transportation, and management of waste streams, Waste treatment technologies, Waste recycling into raw materials and new products, Landfill technologies. The development projects of the STREAMS Programme utilize a number of different technologies, such as biotechnology, information technology, materials technology, measurement and analysis, and automation technology. Finnish expertise in materials recycling technologies and related electronics and information technology is extremely high on a worldwide scale even though the companies represent SMEs. Started in 2001, the STREAMS programme has a total volume of 27 million euros, half of which is funded by Tekes. The programme runs through the end of 2004. (author)

  4. Auditing emergency management programmes: Measuring leading indicators of programme performance.

    Science.gov (United States)

    Tomsic, Heather

    Emergency Management Programmes benefit from review and measurement against established criteria. By measuring current vs required programme elements for their actual currency, completeness and effectiveness, the resulting timely reports of achievements and documentation of identified gaps can effectively be used to rationally support prioritised improvement. Audits, with their detailed, triangulated and objectively weighted processes, are the ultimate approach in terms of programme content measurement. Although Emergency Management is often presented as a wholly separate operational mechanism, distinct and functionally different from the organisation's usual management structure, this characterisation is only completely accurate while managing an emergency itself. Otherwise, an organisation's Emergency Management Programme is embedded within that organisation and dependent upon it. Therefore, the organisation's culture and structure of management, accountability and measurement must be engaged for the programme to exist, much less improve. A wise and successful Emergency Management Coordinator does not let the separate and distinct nature of managing an emergency obscure their realisation of the need for an organisation to understand and manage all of the other programme components as part of its regular business practices. This includes its measurement. Not all organisations are sufficiently large or capable of supporting the use of an audit. This paper proposes that alternate, less formal, yet effective mechanisms can be explored, as long as they reflect and support organisational management norms, including a process of relatively informal measurement focused on the organisation's own perception of key Emergency Management Programme performance indicators.

  5. MarkIT büroo = Offices of MarkIT

    Index Scriptorium Estoniae

    2010-01-01

    Tallinnas Pärnu mnt. 102C asuvas büroohoones paikneva MarkIT büroo sisekujundusest. Sisearhitektid Kard Männil (SAB Miu Miu Miu) ja Loreida Hein (Studio La), nende tähtsamate tööde loetelu. Valge büroomööbel on sisearhitektide projekteeritud. Graafika on sisearhitektid ise joonistanud

  6. SUMMER STUDENT LECTURE PROGRAMME

    CERN Multimedia

    Françoise Benz

    2002-01-01

    SUMMER STUDENT LECTURE PROGRAMME Main Auditorium, bldg. 500   DATE TIME LECTURER TITLE Monday 29 July 09:15 - 10:00 R. RATTAZZI Beyond the Standard Model (3/3) 10:15 - 11:00 P. WELLS Experimental test of the SM - LEP (3/3) 11:15 - 12:00 P. WELLS Discussion Session 14:00 - 16:00 R. ASSMANN The CLIC Concept for a Future Particle Collider at the Energy Frontier Tuesday 30 July 09:15 - 10:00 F. ANTINORI Heavy Ions (1/2) 10:15 - 12:00 F. DYDAK Neutrino Physics (1&2/4) Wednesday 31 July  09:15 - 10:00 F. ANTINORI Heavy Ions (2/2) 10:15 - 11:00 F. DYDAK Neutrino Physics (3/4) 11:15 - 12:00 F. DYDAK / F. ANTINORI Discussion Session Thursday 1 August 09:15 - 10:00 T. NAKADA CP Violation (1/4) 10:15 - 11:00 F. DYDAK Neutrino Physics (4/4) 11:15 - 12:00 F. BEDESCHI Experimental test of the SM Tevatron (1/2) Friday 2 August 09:15 - 10:00 T. NAKADA CP Violation (2/4) 10:15 ? 11:00 F. BEDESCHI Experimental test of the SM Tevatron (2/2) 11:15 ? 12:00 F. BEDESCHI / T. NAKADA Di...

  7. Summer Student Lecture Programme

    CERN Multimedia

    2004-01-01

    Main Auditorium, bldg. 500 More Information DATE TIME LECTURER TITLE Wednesday 7 July 09:15 - 10:00 L. Fayard, O. Ullaland, D. Heagerty (CERN) Programme Presentation Workshops presentation Information on Computing Rules 10:15 - 11:00 R. Aymar (CERN) Introduction to CERN (1/2) 11:15 - 12:00 J. Engelen (CERN) Introduction to CERN (2/2) 15:00 - 16:30 H. Menzel (CERN) An Introduction to Radiation Protection DATE TIME LECTURER TITLE Thursday 8 july 09:15 - 10:00 L. Di Lella (CERN) Introduction to Particle Physics (1/4) 10:15 - 11:00 L. Di Lella (CERN) Introduction to Particle Physics (2/4) 11:15 - 12:00 P. Chomaz (GANIL / CERN) Fundamental questions in modern nuclear physics: The challenge of exotic nuclei (1/2) DATE TIME LECTURER TITLE Friday 9 July 09:15 - 10:00 L. Di Lella (CERN) Introduction to Particle Physics (3/4) 10:15 - 11:00 P. Chomaz (GANIL / CERN) Fundamental questions in modern nuclear physics: The challenge of exotic nuclei (2/2) 11:15 - 12:00 P....

  8. Photovoltaic programme, edition 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This comprehensive publication issued by the Swiss Federal Office of Energy's Photovoltaics (PV) Programme presents an overview (in English) of activities and projects in the photovoltaics research and pilot and demonstration areas in Switzerland for the year 2003. Progress in future solar cell technologies as well as in the area of modules, building integration and system technologies is summarised. Also, national and international co-operation and multi-national pilot and demonstration projects are commented on. Associated projects such as eco-balances for PV systems, forecasting and modelling tools as well as system monitoring tools are discussed. In the area of pilot and demonstration projects, component development, PV integration in sloping roofs, on flat roofs and on facades as well as further PV plant are looked at. Also, measurement campaigns, studies, statistics and other PV-related topics are summarised. This volume presents a list of 92 projects in the PV area including the appropriate Internet links and is completed with a collection of project abstracts.

  9. Management and Communication programme

    CERN Multimedia

    Nathalie Dumeaux

    2005-01-01

    We are pleased to announce the launch of three new courses in the Management and Communication programme: 1.     Managing Time (Open to all Staff Members) The objectives are: To enhance your personal effectiveness through better organisation skills To acquire ways of making the most of your time through improved work habits To reduce stress For the description of this course, please see:  http://humanresources.web.cern.ch/humanresources/external/training/MANCO/P9798/S8E_e.asp 2.     Service Orientation (Open to all Staff Members working in a service-related function) The objectives are: To understand the key elements in an effective client/service provider relationship To develop a client focused approach to providing services For the description of this course, please see:  http://humanresources.web.cern.ch/humanresources/external/training/MANCO/P9798/serv_e.asp 3.   Introduction to Leadership (Open to Staff in Career Paths E & above, including newly appointed supervisors and Secti...

  10. Management and Communication programme

    CERN Multimedia

    Nathalie Dumeaux

    2005-01-01

    We are pleased to announce the launch of three new courses in the Management and Communication programme: 1.     Managing Time (Open to all Staff Members) The objectives are: To enhance your personal effectiveness through better organisation skills To acquire ways of making the most of your time through improved work habits To reduce stress For the description of this course, please see:  http://humanresources.web.cern.ch/humanresources/external/training/MANCO/P9798/S8E_e.asp 2.     Service Orientation (Open to all Staff Members working in a service-related function) The objectives are: To understand the key elements in an effective client/service provider relationship To develop a client focused approach to providing services For the description of this course, please see:  http://humanresources.web.cern.ch/humanresources/external/training/MANCO/P9798/serv_e.asp 3.   Introduction to Leadership (Open to Staff in Career Paths E & above, including newly appointed supervisors and Sect...

  11. Photovoltaic programme, edition 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This comprehensive publication issued by the Swiss Federal Office of Energy's Photovoltaics (PV) Programme presents an overview (in English) of activities and projects in the photovoltaics research and pilot and demonstration areas in Switzerland for the year 2003. Progress in future solar cell technologies as well as in the area of modules, building integration and system technologies is summarised. Also, national and international co-operation and multi-national pilot and demonstration projects are commented on. Associated projects such as eco-balances for PV systems, forecasting and modelling tools as well as system monitoring tools are discussed. In the area of pilot and demonstration projects, component development, PV integration in sloping roofs, on flat roofs and on facades as well as further PV plant are looked at. Also, measurement campaigns, studies, statistics and other PV-related topics are summarised. This volume presents a list of 92 projects in the PV area including the appropriate Internet links and is completed with a collection of project abstracts.

  12. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1986-05-01

    In 1982, KfK joined the fusion programme of EURATOM as a further association introducing its experience in nuclear technology. KfK closely cooperates with IPP Garching, the two institutions forming a research unit aiming at planning and realization of future development steps of fusion. KfK has combined its forces in the Nuclear Fusion Project (PKF) with participation of several KfK departments to the project tasks. Previous work of KfK in magnetic fusion has addressed mainly superconducting magnets, plasma heating by cluster ions and studies on structural materials. At present, emphasis of our work has concentrated increasingly on the nuclear part, i.e. the first wall and blanket structures and the elements of the tritium extraction and purification system. Associated to this component development are studies of remote maintenance and safety. Most of the actual work addresses NET, the next step to a demonstration of fusion feasibility. NET is supposed to follow JET, the operating plasma physics experiment of Euratom, on the 1990's. Detailed progress of the work in the past half year is described in this report. (orig./GG)

  13. The Swedish energy programme

    International Nuclear Information System (INIS)

    Setterwall, M.

    1985-01-01

    The article discusses factors affecting the present and future supply of energy in Sweden. Before 1973 Sweden had the highest per capita oil importation in the world; it has no indigenous oil, gas or coal but is well off for water power, about three quarters of which is at present exploited, the remaining quarter being nearly all sterilised for the time being on conservationist grounds. By 1985 twelve nuclear generators should be in action, but further nuclear development has been stopped by political decisions. Official policy is to reduce dependence upon imported oil by the present use of nuclear energy and without increased importation of coal, but by AD2010 completely to replace nuclear energy by energy saving, using indigenous wood and peat, and developing the alternative sources of sun and wind. Heavy subsidy of the last however has produced little result so far. The author views this programme with great scepticism and opines that the present political blocking of increased generation by oil, coal, water power and nuclear energy will have to be broken, and that nuclear energy will play a major role for a long time to come. (C.J.O.G.)

  14. Summer Student Programme

    CERN Multimedia

    2006-01-01

    Date Time Title Speaker 05/07/2006 09:15 - 10:00 Presentation of the Summer Student Programme F. CERUTTI Information on Computing Rules D. HEAGERTY Workshops presentation O. ULLALAND 10:15 - 11:00 Introduction to CERN J. ENGELEN 11:15 Film on CERN 11:00 Introduction to Particle Physics F. CLOSE 11:15 - 12:00 Accelerators (1/5) S. GILARDONI / E. METRAL 12:00 Discussion Session 7/07/2006 09:15 - 11:00 Introduction to Particle Physics F. CLOSE 11:15 - 12:00 Accelerators (2/5) S. GILARDONI / E. METRAL 12:00 Discussion Session 09:15 - 10:00 Accelerators (3/5) S. GILARDONI / E. METRAL 10:15 - 12:00 Detectors (1-2/5) O. ULLALAND 12:00 Discussion Session 11/07/2006 09:15 - 10:00 Accelerators (4/5) S. GILARDONI / E. METRAL 10:15 - 11:00 Detectors (3/5) O. ULLALAND 11:15 - 12:00 Introduction to Nuclear Physics (1/4) P. CHOMAZ P. CHOMAZ 10:15 - 11:00 Accelerators (5/5) S. GILARDONI / E. METRAL 11:15 - 12:00 Detectors (4/5) O. ULLALAND 12:00 Discus...

  15. Digitally programmable signal generator

    International Nuclear Information System (INIS)

    Priatko, G.J.; Kaskey, J.A.

    1988-01-01

    A digitally programmable signal generator (DPSG) includes a first memory from which data is written into a second memory formed of n banks. Each bank includes four memories and a multiplexer, the banks being read once during each time frame, the read-out bits being multiplexed and fed out serially in synchronism with a plurality of clock pulses occuring during a time frame. The resulting serial bit streams may be fed in parallel to a digital-to-analog converter. The DPSG can be used in applications such as Atomic Vapor Laser Isotope Separation (AVLIS) to create an optimal match between the process laser's spectral profile and that of the vaporized material, optical telecommunications, non-optical telecommunication in the microwave and radio spectrum, radar, electronic countermeasures, high speed computer interconnects, local area networks, high definition video transport and the multiplexing of large quantities of slow digital memory into high speed data streams. This invention extends the operation of DPSGs into the GHz range. (author)

  16. FPGAs for software programmers

    CERN Document Server

    Hannig, Frank; Ziener, Daniel

    2016-01-01

    This book makes powerful Field Programmable Gate Array (FPGA) and reconfigurable technology accessible to software engineers by covering different state-of-the-art high-level synthesis approaches (e.g., OpenCL and several C-to-gates compilers). It introduces FPGA technology, its programming model, and how various applications can be implemented on FPGAs without going through low-level hardware design phases. Readers will get a realistic sense for problems that are suited for FPGAs and how to implement them from a software designer’s point of view. The authors demonstrate that FPGAs and their programming model reflect the needs of stream processing problems much better than traditional CPU or GPU architectures, making them well-suited for a wide variety of systems, from embedded systems performing sensor processing to large setups for Big Data number crunching. This book serves as an invaluable tool for software designers and FPGA design engineers who are interested in high design productivity through behavi...

  17. The probability of Mark-1 liner failure

    International Nuclear Information System (INIS)

    Theofanous, T.G.; Yan, H.; Ratnam, U.; Amarasooriya, W.H.

    1991-01-01

    The authors are proposing a probabilistic methodology, the risk-oriented accident analysis methodology (ROAAM) as an overall systematic, disciplined approach for addressing the Mark-1 liner attack issue. The probabilistic framework encompasses the key features of the phenomenology, yet it is flexible enough to allow independent quantification of individual components as it may arise from independent research efforts. As a first step in this direction, the authors assembled, discussed, and took into consideration in the quantification proposed all relevant prior work. Furthermore, as an essential aspect of the overall methodology, most of those whose work has been referenced and/or used in this report have been asked to comment. The details of this work, the comments received, and the authors' responses are included in NUREG/CR-5423. As an even more important characteristic of the methodology, it is hoped that other quantifications (or information relevant to such) of independent components will become available in the future so that one can aim for convergence and closure

  18. SRS reactor stack plume marking tests

    International Nuclear Information System (INIS)

    Petry, S.F.

    1992-03-01

    Tests performed in 105-K in 1987 and 1988 demonstrated that the stack plume can successfully be made visible (i.e., marked) by introducing smoke into the stack breech. The ultimate objective of these tests is to provide a means during an emergency evacuation so that an evacuee can readily identify the stack plume and evacuate in the opposite direction, thus minimizing the potential of severe radiation exposure. The EPA has also requested DOE to arrange for more tests to settle a technical question involving the correct calculation of stack downwash. New test canisters were received in 1988 designed to produce more smoke per unit time; however, these canisters have not been evaluated, because normal ventilation conditions have not been reestablished in K Area. Meanwhile, both the authorization and procedure to conduct the tests have expired. The tests can be performed during normal reactor operation. It is recommended that appropriate authorization and procedure approval be obtained to resume testing after K Area restart

  19. The Mark 3 data base handler

    Science.gov (United States)

    Ryan, J. W.; Ma, C.; Schupler, B. R.

    1980-01-01

    A data base handler which would act to tie Mark 3 system programs together is discussed. The data base handler is written in FORTRAN and is implemented on the Hewlett-Packard 21MX and the IBM 360/91. The system design objectives were to (1) provide for an easily specified method of data interchange among programs, (2) provide for a high level of data integrity, (3) accommodate changing requirments, (4) promote program accountability, (5) provide a single source of program constants, and (6) provide a central point for data archiving. The system consists of two distinct parts: a set of files existing on disk packs and tapes; and a set of utility subroutines which allow users to access the information in these files. Users never directly read or write the files and need not know the details of how the data are formatted in the files. To the users, the storage medium is format free. A user does need to know something about the sequencing of his data in the files but nothing about data in which he has no interest.

  20. South African southern ocean research programme

    CSIR Research Space (South Africa)

    SASCAR

    1987-01-01

    Full Text Available This document describes the South African National Antarctic Research Programme's (SANARP) physical, chemical and biological Southern Ocean research programme. The programme has three main components: ecological studies of the Prince Edward Islands...

  1. Trade Mark Cluttering: An Exploratory Report Commissioned by UKIPO

    OpenAIRE

    von Graevenitz, Georg; Greenhalgh, Christine; Helmers, Christian; Schautschick, Philipp

    2012-01-01

    This report explores the problem of “cluttering” of trade mark registers. The report consists of two parts: the first presents a conceptual discussion of “cluttering” of trade mark registers. The second part provides an exploratory empirical analysis of trade mark applications at the UK Intellectual Property Office (UKIPO) and the European trade mark office (OHIM). This part contains results of a descriptive and an econometric analysis. According to our definition, cluttering arises where fir...

  2. Radon programme: presence and future

    International Nuclear Information System (INIS)

    Hulka, J.

    2009-01-01

    In this presentation an overview of radon programme experiences is presented. The paper summarises national radon policy, national programmes, legislation, the role of preventive measures and interventions with respect to existing and future exposure and knowledge of radon risk, problems of remediation strategies, practical protection in dwellings, radon measurements strategies, progress in radon measurement of an individual house (radon diagnosis), radon mapping process and sense of delineation of radon prone areas, natural radioactivity of building materials and radioactivity in public water and their role in the radon programme, public awareness on radon issue and publicity campaign. Some research activities are proposed aiming at effective solutions of radon issues in future

  3. A Statistical Programme Assignment Model

    DEFF Research Database (Denmark)

    Rosholm, Michael; Staghøj, Jonas; Svarer, Michael

    When treatment effects of active labour market programmes are heterogeneous in an observable way  across the population, the allocation of the unemployed into different programmes becomes a particularly  important issue. In this paper, we present a statistical model designed to improve the present...... duration of unemployment spells may result if a statistical programme assignment model is introduced. We discuss several issues regarding the  plementation of such a system, especially the interplay between the statistical model and  case workers....

  4. 9 CFR 590.418 - Supervision of marking and packaging.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Supervision of marking and packaging...) Identifying and Marking Product § 590.418 Supervision of marking and packaging. (a) Evidence of label approval... has on file evidence that such official identification or packaging material bearing such official...

  5. 14 CFR 1203.501 - Applying derivative classification markings.

    Science.gov (United States)

    2010-01-01

    ... INFORMATION SECURITY PROGRAM Derivative Classification § 1203.501 Applying derivative classification markings. Persons who apply derivative classification markings shall: (a) Observe and respect original... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Applying derivative classification markings...

  6. 46 CFR 199.176 - Markings on lifesaving appliances.

    Science.gov (United States)

    2010-10-01

    ... ARRANGEMENTS LIFESAVING SYSTEMS FOR CERTAIN INSPECTED VESSELS Requirements for All Vessels § 199.176 Markings on lifesaving appliances. (a) Lifeboats and rescue boats. Each lifeboat and rescue boat must be plainly marked as follows: (1) Each side of each lifeboat and rescue boat bow must be marked in block...

  7. 27 CFR 19.612 - Authorized abbreviations to identify marks.

    Science.gov (United States)

    2010-04-01

    ... T Tax Determined TD Wine Spirits Addition WSA (Sec. 201, Pub. L. 85-859, 72 Stat. 1360, as amended... TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Containers and Marks... to identify certain marks: Mark Abbreviation Completely Denatured Alcohol CDA Distilled Spirits...

  8. 9 CFR 316.13 - Marking of outside containers.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Marking of outside containers. 316.13... INSPECTION AND CERTIFICATION MARKING PRODUCTS AND THEIR CONTAINERS § 316.13 Marking of outside containers. (a... domestic commerce is moved from an official establishment, the outside container shall bear an official...

  9. Survival and reproduction of radio-marked adult spotted owls.

    Science.gov (United States)

    C.C. Foster; E.D. Forsman; E.C. Meslow; G.S. Miller; J.A. Reid; F.F. Wagner; A.B. Carey; J.B. Lint

    1992-01-01

    We compared survival, reproduction, and body mass of radio-marked and non radio-marked spotted owls (Strix occidentalis) to determine if backpack radios influenced reproduction or survival. In most study areas and years, there were no differences (P > 0.05) in survival of males and females or in survival of radio-marked versus banded owls. There...

  10. Marking for Structure using Boolean Feedback | Louw | Journal for ...

    African Journals Online (AJOL)

    This paper presents evidence that marking student texts with well considered checklists is more effective than marking by hand. An experiment conducted on first-year students illustrated that the checklists developed to mark introductions, conclusions and paragraphs yielded better revision results than handwritten ...

  11. Tooth-marked small theropod bone: an extremely rare trace

    DEFF Research Database (Denmark)

    Jacobsen, Aase Roland

    2001-01-01

    Tooth-marked dinosaur bones provide insight into feeding behaviours and biting strategies of theropod dinosaurs. The majority of theropod tooth marks reported to date have been found on herbivorous dinosaur bones, although some tyrannosaurid bones with tooth marks have also been reported. In 1988...

  12. 46 CFR 108.645 - Markings on lifesaving appliances.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Markings on lifesaving appliances. 108.645 Section 108.645 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Equipment Markings and Instructions § 108.645 Markings on lifesaving appliances. (a...

  13. The VULCANO spreading programme

    Energy Technology Data Exchange (ETDEWEB)

    Cognet, G.; Laffont, G.; Jegou, C.; Journeau, C.; Sudreau, F.; Pierre, J.; Ramacciotti, M. [CEA (Atomic Energy Commission), DRN/DER - Bat. 212, CEA Cadarache, 13108 St. Paul Lez Durance (France)

    1999-07-01

    Among the currently studied core-catcher projects, some of them suppose corium spreading before cooling, in particular the EPR (European Pressurized Reactor) core-catcher concept is based on mixing the corium with a special concrete, spreading the molten mixture on a large multi-layer surface cooled from the bottom and subsequently cooling by flooding with water. Therefore, melt spreading deserves intensive investigation in order to determine and quantify key phenomena which govern the stopping of spreading. In France, for some years, the Nuclear Reactor Division of the Atomic Energy Commission (CEA/DRN) has undertaken a large program to improve knowledge on corium behaviour and coolability. This program is based on experimental and theoretical investigations which are finally gathered in scenario and mechanistic computer codes. In this framework, the real material experimental programme, VULCANO, conducted within an European frame, is currently devoted to the study of corium spreading. In 1997 and 1998, several tests have been performed on dry corium spreading with various composition of melts. Although all the observed phenomena, in particular the differences between simulant and real material melts have not been yet totally explained, these tests have already provided a lot of information about: The behaviour of complex mixtures including refractory oxides, silica, iron oxides and in one case iron metal; Spreading progression, which was never stopped in any of these tests by a crust formation at the front; The structure of spread melts (porosity, crusts,...); Physico-chemical interaction between melt and the refractory substratum which was composed of zirconia bricks. (authors)

  14. The VULCANO spreading programme

    International Nuclear Information System (INIS)

    Cognet, G.; Laffont, G.; Jegou, C.; Journeau, C.; Sudreau, F.; Pierre, J.; Ramacciotti, M.

    1999-01-01

    Among the currently studied core-catcher projects, some of them suppose corium spreading before cooling, in particular the EPR (European Pressurized Reactor) core-catcher concept is based on mixing the corium with a special concrete, spreading the molten mixture on a large multi-layer surface cooled from the bottom and subsequently cooling by flooding with water. Therefore, melt spreading deserves intensive investigation in order to determine and quantify key phenomena which govern the stopping of spreading. In France, for some years, the Nuclear Reactor Division of the Atomic Energy Commission (CEA/DRN) has undertaken a large program to improve knowledge on corium behaviour and coolability. This program is based on experimental and theoretical investigations which are finally gathered in scenario and mechanistic computer codes. In this framework, the real material experimental programme, VULCANO, conducted within an European frame, is currently devoted to the study of corium spreading. In 1997 and 1998, several tests have been performed on dry corium spreading with various composition of melts. Although all the observed phenomena, in particular the differences between simulant and real material melts have not been yet totally explained, these tests have already provided a lot of information about: The behaviour of complex mixtures including refractory oxides, silica, iron oxides and in one case iron metal; Spreading progression, which was never stopped in any of these tests by a crust formation at the front; The structure of spread melts (porosity, crusts,...); Physico-chemical interaction between melt and the refractory substratum which was composed of zirconia bricks. (authors)

  15. Mark Leonard : EL ei peakski olema suurvõim / Mark Leonard ; interv. Erkki Bahovski

    Index Scriptorium Estoniae

    Leonard, Mark

    2008-01-01

    Intervjuu Euroopa Välissuhete Nõukogu tegevdirektoriga, kes vastab küsimustele, mis puudutavad USA ja Euroopa suhteid, Euroopa Liidu välispoliitikat, Venemaa ja Euroopa Liidu suhteid pärast Gruusia konflikti. Ta peab murettekitavaks, et Venemaa üritab takistada euroopalike väärtuste levitamist oma naaberriikides. Vt. samas: Mark Leonard. Ilmunud ka Sirp : Diplomaatia 14. nov. nr. 11 lk. 13-14

  16. Relocalising Academic Literacy: Diversity, Writing and Collective Learning in an International Master's Programme

    Science.gov (United States)

    Clemensen, Nana; Holm, Lars

    2017-01-01

    This article contributes to the continuing discussion about academic literacy in international higher education. Approaching international study programmes as temporary educational contact zones, marked by a broad diversity in students' educational and discursive experiences, we examine the negotiation and relocalisation of academic literacy among…

  17. Running continuous academic adoption programmes

    DEFF Research Database (Denmark)

    Nielsen, Tobias Alsted

    Running successful academic adoption programmes requires executive support, clear strategies, tactical resources and organisational agility. These two presentations will discuss the implementation of strategic academic adoption programs down to very concrete tool customisations to meet specific...

  18. CERN openlab Summer Student Programme

    CERN Multimedia

    2012-01-01

    CERN openlab is currently taking applications for its summer student programme. The closing date for applications is 30 March 2012.   The openlab Summer Student Programme is open for applications from bachelor, master and PhD students in computer science and physics. Successful applicants will spend 8 weeks at CERN, during the period June to September 2012, to work with some of the latest hardware and software technologies. The programme is more than just a summer at CERN: it can lead to follow-on projects at the home institute and may even inspire the students to become entrepreneurs in cutting-edge computing technologies. A series of lectures will be given by experts in various domains of CERN related high-throughput computing. Study tours to external companies and universities as well as to CERN facilities are also part of the programme. Please visit www.cern.ch/openlab-students for more information.

  19. Summer Research Fellowship Programme 2018

    Indian Academy of Sciences (India)

    Date of birth: 2 September 1957. Specialization: Cosmic Magnetic Fields, Structure Formation, Cosmology Address: Distinguished Professor & Dean, Visitor Academic Programmes, Inter-University Centre for Astronomy & Astrophysics, Post Bag 4, Ganeshkhind, Pune 411 007, Maharashtra Contact: Office: (020) 2560 4101

  20. The Italian compliance assurance programme

    International Nuclear Information System (INIS)

    Trivelloni, S.

    1999-01-01

    An overview is given of the compliance assurance programme that is applied in Italy and the role of the different competent authorities that have responsibilities for the transport of radioactive materials is described. (author)

  1. CERN openlab summer student programme

    CERN Multimedia

    2013-01-01

    CERN openlab is currently taking applications for its summer student programme. The closing date for applications is 31 March 2013.   The openlab summer student programme is open for applications from bachelor, master and PhD students in computer science and physics. Successful applicants will spend 9 weeks at CERN, during the period from June to September 2013, working with some of the latest hardware and software technologies. The programme is more than just a summer at CERN: it can lead to follow-on projects at the home institute and may even inspire students to become entrepreneurs in cutting-edge computing technologies. A series of lectures will be given by experts in various domains of CERN-related high-throughput computing. Study tours of external companies and universities as well as of CERN facilities are also part of the programme. Please visit the CERN openlab website for more information.

  2. The European wind energy programmes

    International Nuclear Information System (INIS)

    Beurskens, H.J.M.; Lalas, D.

    1993-01-01

    A general review is given of national wind energy programmes in European countries. First, tendencies of the past wind energy programmes are described and linked to the present developments. Not only the separate aspects are reviewed (R+D, wind turbine development, market stimulation, utility involvement, regulatory issues and operational experiences), but also the synergetic aspects of their integration is addressed. The main conclusion is that the integration of R+D, industrial development and market stimulation works. 4 ills., 3 tabs

  3. Field Evaluation of Programmable Thermostats

    Energy Technology Data Exchange (ETDEWEB)

    Sachs, O. [Fraunhofer Center for Sustainable Energy Systems (CSE), Cambridge, MA (United States); Tiefenbeck, V. [Fraunhofer Center for Sustainable Energy Systems (CSE), Cambridge, MA (United States); Duvier, C. [Fraunhofer Center for Sustainable Energy Systems (CSE), Cambridge, MA (United States); Qin, A. [Fraunhofer Center for Sustainable Energy Systems (CSE), Cambridge, MA (United States); Cheney, K. [Fraunhofer Center for Sustainable Energy Systems (CSE), Cambridge, MA (United States); Akers, C. [Fraunhofer Center for Sustainable Energy Systems (CSE), Cambridge, MA (United States); Roth, K. [Fraunhofer Center for Sustainable Energy Systems (CSE), Cambridge, MA (United States)

    2012-12-01

    Prior research suggests that poor programmable thermostats usability may prevent their effective use to save energy. The Fraunhofer team hypothesized that home occupants with high-usability thermostats would be more likely to use them to save energy than people with a basic thermostats. In this report, the team discusses results of a project in which the team monitored and compared programmable thermostats with basic thermostats in an affordable housing apartment complex.

  4. Statistical methods for the forensic analysis of striated tool marks

    Energy Technology Data Exchange (ETDEWEB)

    Hoeksema, Amy Beth [Iowa State Univ., Ames, IA (United States)

    2013-01-01

    In forensics, fingerprints can be used to uniquely identify suspects in a crime. Similarly, a tool mark left at a crime scene can be used to identify the tool that was used. However, the current practice of identifying matching tool marks involves visual inspection of marks by forensic experts which can be a very subjective process. As a result, declared matches are often successfully challenged in court, so law enforcement agencies are particularly interested in encouraging research in more objective approaches. Our analysis is based on comparisons of profilometry data, essentially depth contours of a tool mark surface taken along a linear path. In current practice, for stronger support of a match or non-match, multiple marks are made in the lab under the same conditions by the suspect tool. We propose the use of a likelihood ratio test to analyze the difference between a sample of comparisons of lab tool marks to a field tool mark, against a sample of comparisons of two lab tool marks. Chumbley et al. (2010) point out that the angle of incidence between the tool and the marked surface can have a substantial impact on the tool mark and on the effectiveness of both manual and algorithmic matching procedures. To better address this problem, we describe how the analysis can be enhanced to model the effect of tool angle and allow for angle estimation for a tool mark left at a crime scene. With sufficient development, such methods may lead to more defensible forensic analyses.

  5. Bite marks on skin and clay: A comparative analysis

    Directory of Open Access Journals (Sweden)

    R.K. Gorea

    2014-12-01

    Full Text Available Bite marks are always unique because teeth are distinctive. Bite marks are often observed at the crime scene in sexual and in physical assault cases on the skin of the victims and sometimes on edible leftovers in burglary cases. This piece of evidence is often ignored, but if properly harvested and investigated, bite marks may prove useful in apprehending and successfully prosecuting the criminals. Due to the importance of bite marks, we conducted a progressive randomised experimental study conducted on volunteers. A total of 188 bite marks on clay were studied. Based on these findings, 93.34% of the volunteers could be identified from the bite marks on the clay. In addition, 201 impressions on skin were studied, and out of these cases, 41.01% of the same volunteers could be identified based on the bite mark impressions on the skin.

  6. The MERLIN programme: Pt. 1

    International Nuclear Information System (INIS)

    Worswick, D.; Hindle, E.D.; Stacey, R.D.; Stevens, M.; Wickett, A.J.; GArlick, A.

    1989-08-01

    The MERLIN rig at the Northern Research Laboratories, Springfields, was intended to investigate the deformation behaviour of Zircaloy fuel rod cladding under conditions approximating those of a large break Loss of Coolant Accident (LOCA). In this rig, an assembly of electrically heated fuel rod simulators (6x6 cluster) was subjected to a temperature transient simulating that predicted to occur in a LOCA, including the initiation of bottom reflooding at a suitable stage. The main aim of the MERLIN programme was to investigate the extent of sub-channel blockage produced during clad deformation under conditions of high mechanical restraint, in two phase cooling conditions. The programme was to consist of four test bundles, the final two of which would be used for ballooning experiments in which high sub-channel blockage would be produced by a suitable choice of test conditions. A major part of the programme was to provide validation data for reactor accident codes used in the CEGB clad ballooning safety case for Sizewell B. This report, one of a series which describes the programme in detail, is an overview of the MERLIN programme. It provides background, summarises those reports which discuss the programme in detail and draws attention to those areas where useful information has been obtained. (author)

  7. Norwegian mastitis control programme

    Directory of Open Access Journals (Sweden)

    Østerås O

    2009-04-01

    changes in attitude and breeding, eradicating bovine virus diarrhoea virus (BVDV and a better implementation of mastitis prevention programmes.

  8. Norwegian mastitis control programme

    Science.gov (United States)

    2009-01-01

    breeding, eradicating bovine virus diarrhoea virus (BVDV) and a better implementation of mastitis prevention programmes. PMID:22081877

  9. [Programmes against depression].

    Science.gov (United States)

    Taleb, M; Rouillon, F; Hegerl, U; Hamdani, N; Gorwood, Ph

    2006-01-01

    frequently criticized, as this may reduce efficacy. A multilevel approach is crucial for the success of action programmes against depression, because synergistic effects can be expected. In Germany, the "Nürnberger Bündnis gegen Depression" project was based on four levels, and effectively reduced the suicide rate. These levels of action included "cooperation with GPs", such as training sessions based on video, and presence of a phone hotline, "public relations activities", "training sessions for multipliers", such as priests, social workers and media, and "special offers for high risk groups and self-help activities". In France, such a program is clearly required.

  10. Teacher Correction versus Peer-Marking

    Directory of Open Access Journals (Sweden)

    Mourente Miguel Mariana Correia

    2004-08-01

    Full Text Available Written language is undoubtedly more often used than oral language in a variety of contexts, including both the professional and academic life. Consequently, developing strategies for correcting compositions and improving students’ written production is of vital importance. This article describes an experiment aimed at assessing the two most widely used methods of correction for compositions –traditional teacher correction and peer marking and their effect on the frequency of errors. Data was collected by asking students to write and revise a text. Statistical tests were performed to analyse it. At the end of the experiment, it was found that no significant difference in efficiency existed between the two methods, contradicting expectations (cf. Davies, 2002; Levine et al., 2002 and Ward, 2001. Key words: English-Teaching, Foreign Language-Teaching Writing, Evaluation, Assessment El lenguaje escrito es sin duda usado con más frecuencia que el lenguaje oral en una variedad de situaciones o contextos, incluyendo tanto la vida profesional como la académica. En consecuencia, el desarrollo de estrategias para corregir composiciones y mejorar la producción escrita de los estudiantes es de suma importancia. Este artículo describe un experimento cuyo objetivo es evaluar los dos métodos más usados para la corrección de composiciones, la corrección tradicional por el maestro y la corrección por revisión de pares, con respecto a su efecto en la frecuencia de errores. Se recogió información haciendo que estudiantes escribieran y revisaran un texto y sobre esos textos se aplicaron pruebas estadísticas para analizar los errores. Contrario a lo esperado, al final del experimento, no se encontró ninguna diferencia significativa entre los resultados encontrados por los dos métodos, (cfr. Davies, 2002; Levine et al., 2002 y Ward, 2001. Palabras claves: Inglés-Enseñanza, Idioma Extranjero-Enseñanza, Composición, Evaluación

  11. Research programme on radioactive wastes - Synthesis report 2009

    International Nuclear Information System (INIS)

    Brander, S.

    2010-02-01

    This short synthesis report for the Swiss Federal Office of Energy (SFOE) issued by the head of the programme on radioactive wastes reports on activities during the year 2009. Background information on the definition of topics to be focussed on is briefly presented. In particular, topics such as communication with the general public, knowledge-saving and marking concepts for radioactive wastes are noted. Work done in these areas as well as on waste management in general are discussed. Conferences held and the transfer of know-how are noted, as is cooperation with foreign organisations active in the area of nuclear research and waste management. Finally, work planned for 2010 is noted

  12. NDA National Graduate Programme 'nucleargraduates'

    International Nuclear Information System (INIS)

    Dawson, Carl

    2010-01-01

    The aim of this paper is to outline the NDA National Graduate Programme (nuclear graduates). The NDA has a remit under the Energy Act (2004) 'to maintain and develop the skills for decommissioning and nuclear clean-up'. Although current research is now being reviewed, there is significant evidence to suggest that the age profile in the Site Licence Companies is skewed towards older workers and there is likely to be a skill shortage in 3-5 years. As nuclear clean-up is a national issue; skill shortages also become a national issue in a very real sense. In addition, evidence suggests that the industry needs to be constantly challenged in order to achieve its targets for decommissioning. The NDA has a unique position under the Act. It is both a strategic overseer and direct employer. To this end the 'National Graduate Programme' is aligned to both the NDA's previous succession plans and the needs of the industry. Industry needs leadership that challenges the status quo and moves the UK nuclear industry to become best in class; Industry needs a dedicated to programme to address skills shortages and difficult to recruit areas such as, but not exclusively, estimators, schedulers, contract managers, site engineers, decommissioning technicians, safety monitors; The NDA has indicated a 'commercial and politically savvy' cohort is required to meet its own internal challenges and to ensure sustainability in its own workforce, and to be sensitive to the needs of customers and suppliers alike; Need to create a more diversified workforce in the nuclear industry and also plan for new skills evolving from research and development breakthroughs; Need to ensure that Tier 1, 2, 3 and 4 contractors invest in the leadership and skills for the future. World Class - delivery will be benchmarked against UK based multinational companies who operate in a global graduate attraction and development marketplace. The graduates targeted will be from leading institutions and will have a blend of

  13. The Things of Caesar: Mark-ing the Plural (Mk 12:13–17

    Directory of Open Access Journals (Sweden)

    Warren Carter

    2014-09-01

    Full Text Available This article observes the rarely-discussed phenomenon that the Marcan paying-the-tax scene refers to tax in the singular, whilst the concluding saying uses the plural ‘the things of Caesar and of God’. The article accounts for this phenomenon by means of developing traditions. The section under the heading ‘Mark’s scene and saying about taxes (12:13–17’ counters the common claim that scene and saying originated as a unit from the historical Jesus. It proposes that whilst the saying may have originated with Jesus, the scene as we have it did not. The section under the heading ‘Social memory, orality, and a multi-referential saying?’ suggests some contexts that the saying about the things of Caesar addressed pre-Mark. And under the section ‘Trauma and Mark’s scene’ it is argued that Mark created a unit comprising scene and saying to negotiate the ‘ trauma’ of the 66–70 war. The unit evaluates freshly-asserted Roman power as idolatrous and blasphemous whilst simultaneously authorising the continued involvement of Jesus-believers in imperial society.

  14. Programmable automation systems in PSA

    International Nuclear Information System (INIS)

    Pulkkinen, U.

    1997-06-01

    The Finnish safety authority (STUK) requires plant specific PSAs, and quantitative safety goals are set on different levels. The reliability analysis is more problematic when critical safety functions are realized by applying programmable automation systems. Conventional modeling techniques do not necessarily apply to the analysis of these systems, and the quantification seems to be impossible. However, it is important to analyze contribution of programmable automation systems to the plant safety and PSA is the only method with system analytical view over the safety. This report discusses the applicability of PSA methodology (fault tree analyses, failure modes and effects analyses) in the analysis of programmable automation systems. The problem of how to decompose programmable automation systems for reliability modeling purposes is discussed. In addition to the qualitative analysis and structural reliability modeling issues, the possibility to evaluate failure probabilities of programmable automation systems is considered. One solution to the quantification issue is the use of expert judgements, and the principles to apply expert judgements is discussed in the paper. A framework to apply expert judgements is outlined. Further, the impacts of subjective estimates on the interpretation of PSA results are discussed. (orig.) (13 refs.)

  15. Radio-marking and in vivo imagery of oligonucleotides

    International Nuclear Information System (INIS)

    Kuehnast, Bertrand

    2000-01-01

    This research thesis is part of activities aimed at the development of new molecules like oligonucleotides. Its first objective was the development and validation of a marking method with fluorine-18 of oligonucleotides for their in-vivo pharmacological assessment with positron emission tomography (PET). Further investigations addressed the use of iodine-125 for oligonucleotide marking purpose. This radio-marking, and in vivo and ex vivo imagery techniques are described, and their potential is highlighted for the pharmacological assessment of different oligonucleotides

  16. Preoperative Site Marking: Are We Adhering to Good Surgical Practice?

    Science.gov (United States)

    Bathla, Sonia; Chadwick, Michael; Nevins, Edward J; Seward, Joanna

    2017-06-29

    Wrong-site surgery is a never event and a serious, preventable patient safety incident. Within the United Kingdom, national guidance has been issued to minimize the risk of such events. The mandate includes preoperative marking of all surgical patients. This study aimed to quantify regional variation in practice within general surgery and opinions of the surgeons, to help guide the formulation and implementation of a regional general surgery preoperative marking protocol. A SurveyMonkey questionnaire was designed and distributed to 120 surgeons within the Mersey region, United Kingdom. This included all surgical trainees in Mersey (47 registrars, 56 core trainees), 15 consultants, and 2 surgical care practitioners. This sought to ascertain their routine practice and how they would choose to mark for 12 index procedures in general surgery, if mandated to do so. A total of 72 responses (60%) were obtained to the SurveyMonkey questionnaire. Only 26 (36.1%) said that they routinely marked all of their patients preoperatively. The operating surgeon marked the patient in 69% of responses, with the remainder delegating this task. Markings were visible after draping in only 55.6% of marked cases. Based on our findings, surgeons may not be adhering to "Good Surgical Practice"; practice is widely variable and surgeons are largely opposed and resistant to marking patients unless laterality is involved. We suggest that all surgeons need to be actively engaged in the design of local marking protocols to gain support, change practice, and reduce errors.

  17. Radon programmes and health marketing

    International Nuclear Information System (INIS)

    Fojtikova, I.; Rovenska, K.

    2011-01-01

    Being aware of negative health effects of radon exposure, many countries aim for the reduction of the radon exposure of their population. The Czech radon programme was commenced >20 y ago. Since then experts have gathered a lot of knowledge, necessary legislation has been enacted, tens of thousands of inhabitants have been offered free measurement and subsidy for the mitigation. Despite the effort, the effectiveness of the radon programme seems to be poor. Newly built houses still exhibit elevated radon concentrations and the number of houses mitigated is very low. Is it possible to enhance the effectivity of radon programme while keeping it on a voluntary basis? One possible way is to employ health marketing that draws together traditional marketing theories and science-based strategies to prevention. The potential of using marketing principles in communication and delivery of radon information will be discussed. (authors)

  18. Modernization programme at Dukovany NPP

    International Nuclear Information System (INIS)

    Trnka, M.

    2000-01-01

    The main goal of each NPP is to produce electricity safely, economically and without influence to environment. For Dukovany NPP it means to upgrade all documentation and perform the Equipment Upgrading Programme. All these activities are time and money consuming and therefore the determination of priority of all items was necessary. In the presentation there are mentioned some important changes in documentation, results of PSA studies and reason for Equipment Upgrading Programme performance. It was selected the most important item from the list of Equipment Upgrading Programme the I and C upgrading. Management has decided that Dukovany NPP will become among the best NPPs with WWER type of reactor. It seems this decision is the best way how to extend lifetime of the NPP. (author)

  19. Radon programmes and health marketing.

    Science.gov (United States)

    Fojtikova, Ivana; Rovenska, Katerina

    2011-05-01

    Being aware of negative health effects of radon exposure, many countries aim for the reduction of the radon exposure of their population. The Czech radon programme was commenced >20 y ago. Since then experts have gathered a lot of knowledge, necessary legislation has been enacted, tens of thousands of inhabitants have been offered free measurement and subsidy for the mitigation. Despite the effort, the effectiveness of the radon programme seems to be poor. Newly built houses still exhibit elevated radon concentrations and the number of houses mitigated is very low. Is it possible to enhance the effectivity of radon programme while keeping it on a voluntary basis? One possible way is to employ health marketing that draws together traditional marketing theories and science-based strategies to prevention. The potential of using marketing principles in communication and delivery of radon information will be discussed.

  20. Energy Management Programmes for Industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-05

    The IEA Policy Pathway publications provide details on how to implement specific recommendations drawn from the IEA 25 Energy Efficiency Policy Recommendations. This Policy Pathway, jointly produced by the International Energy Agency and the Institute for Industrial Productivity, develops the critical steps for policy makers implementing energy management programmes for industry. Optimising energy use in industry is essential to improve industrial competitiveness and achieve wider societal goals such as energy security, economic recovery and development, climate change mitigation and environmental protection. While there is significant potential to decrease energy consumption in this sector, opportunities to improve energy efficiency are still under-exploited. Energy management programmes have shown to be instrumental in addressing many of the barriers that inhibit wide-scale uptake of energy management in industry. The Policy Pathway builds on lessons learned from country experiences and provides actionable guidance on how to plan and design, implement, evaluate and monitor energy management programmes for industry.

  1. The internationalisation of postgraduate programmes

    DEFF Research Database (Denmark)

    Fink, Flemming Kobberøe; Andersen, Ole K.; Bak, Thomas

    2002-01-01

    This paper presents the efforts and experiences of globalisation of the study programmes within electronic engineering at Aalborg University. The Project-Organised Problem-Based Learning Model, which have been employed since 1974 is presented and discussed. The consequences this has for the inter......This paper presents the efforts and experiences of globalisation of the study programmes within electronic engineering at Aalborg University. The Project-Organised Problem-Based Learning Model, which have been employed since 1974 is presented and discussed. The consequences this has...... for the international students are presented and discussed in terms of e.g. the teamwork situation, professional and cultural differences. A student enrolment programme, implemented through the provision of scholarships, jointly paid by government and industry funds is presented...

  2. POST GRADUATE PROGRAMME IN DIETETICS &FOOD SERVICE MANAGEMENT (MSCDFSM PROGRAMME of IGNOU: Access through the Lucknow Regional Centre

    Directory of Open Access Journals (Sweden)

    J. S. DOROTHY

    2014-10-01

    Full Text Available Indira Gandhi National Open University (IGNOU which was established initially as a Single mode Distance Teaching Institution (DTI in the year 1985 opened its campus to face-to-face education in the year 2008 and thus now is a Dual mode Distance Teaching Institution (DTI. The Post Graduate Programme (Master of Science in Dietetics and Food Service Management (MScDFSM Programme of IGNOU offered through the Distance Learning Mode from the year 2005 has been the boon in developing human resources involved in Nutrition and Dietetics services and also serves as a mode for continuing education among the professionals on-the-job. Accessibility to the programme is independent of the qualification earned at the Bachelor’s level as at IGNOU flexibility of the qualification is ensured for fulfilling the eligibility criteria into the MScDFSM Programme so that the diverse needs of the aspirants are accommodated at entry level itself. The Programme is unique in that it has compulsory Dissertation and Internship besides the Theory and Practical Courses. The Self-Study is enriched by the Teacher inbuilt Self-instructional Study Materials coupled with compulsory submission of the Tutor Marked Assignments (TMA which phase learning and initiate the didactic communication between the Academic Counsellor (who facilitate the Academic Transactions at the field level functionary - the Learner Support Centre and the Learner. The MSc DFSM Programme of IGNOU, as the distance learning programme offered by the School of Continuing Education (SOCE of IGNOU in the Indian Sub-Continent only. This paper discusses how the MScDFSM Programme of IGNOU is contributing to the staff development of in-service Nutritionists and Dietitians through the distance education/learning mode in Lucknow (Uttar Pradesh, North India Regional Centre. This paper also highlights the Institutions, which served as the Learner Support Centres from the year 2005 (when the programme was launched till 2011

  3. The CEC radon research programme

    International Nuclear Information System (INIS)

    Olast, M.

    1990-01-01

    Following a council decision of 20 June 1989, a CEC research and training programme in the field of radiation protection has been adopted for the period 1990-1991. The european research programme is divided into three main areas, one being 'Risks and Management of Radiation Exposure': this includes a section on 'Exposure to natural radioactivity and evaluation of parameters influencing these risks'. The importance given to this field led to an impressive number of research proposals. The proposals accepted are grouped in three large multinational contracts covering radon exposure, and in one multinational contract dealing with environmental radon epidemiology. (author)

  4. Multiple channel programmable coincidence counter

    Science.gov (United States)

    Arnone, Gaetano J.

    1990-01-01

    A programmable digital coincidence counter having multiple channels and featuring minimal dead time. Neutron detectors supply electrical pulses to a synchronizing circuit which in turn inputs derandomized pulses to an adding circuit. A random access memory circuit connected as a programmable length shift register receives and shifts the sum of the pulses, and outputs to a serializer. A counter is input by the adding circuit and downcounted by the seralizer, one pulse at a time. The decoded contents of the counter after each decrement is output to scalers.

  5. The ESO Observing Programmes Committee

    Science.gov (United States)

    Westerlund, B. E.

    1982-06-01

    Since 1978 the ESO Observing Programmes Committee (OPC) has "the function to inspect and rank the proposals made for observing programmes at La Silla, and thereby to advise the Director General on the distribution of observing time". The members (one from each member country) and their alternates are nominated by the respective national committees for five-year terms (not immediately renewable). The terms are staggered so that each year one or two persons are replaced. The Chairman is appointed annually by the Council. He is invited to attend Council meetings and to report to its members.

  6. National Leprosy Eradication Programme (NLEP

    Directory of Open Access Journals (Sweden)

    Shetty Sushant

    1997-01-01

    Full Text Available This article traces the history of the growth and development of our National Leprosy Eradication Programme (NLEP. The aims, strategy, means of eradication, the organizational structure have been discussed. Since the beginning of this programme, the prevalence rate and disability rate have shown a sharp decline. The number of cases detected and under treatment have also increased. The achievement made has been possible due to an excellent organization of leprosy relief work under NLEP with the active cooperation of the non- governmental organizations. Now that leprosy is on the decline, the need of education and rehabilitation of patients assumes a greater importance.

  7. Offshoots from beryllium development programme

    International Nuclear Information System (INIS)

    Sharma, B.P.; Sinha, P.K.

    1995-01-01

    The paper briefly presents extraction and processing of beryllium metal as practiced in the beryllium facilities at Turbhe, New Bombay. These facilities have been set up to meet the indigenous requirements of the metal in space and nuclear science programmes. As offshoot of this beryllium development programme has been the development of a number of pyro and powder metallurgical equipment. Indigenous development of these pieces of equipment has been a professionally rewarding experience. Efforts are now on to promote these equipment for industrial use. (author). 6 refs., 6 figs., 2 tabs

  8. Marked bengal pink. A dynamic test using marking doses; its value in jaundice diagnosis

    International Nuclear Information System (INIS)

    Kellershohn, C.; Desgrez, A.; Delaloye, B.

    1961-01-01

    The authors do a historic calling back of the differential study of jaundices thanks to the semi logarithmic gradients of expurgation of bromine sulphone-phthalein and thanks to the time of appearance of this material in the bile collected by duodenal tubing. They sum up likewise the foreign works which lead to take the place of this test, the outside count at the level of the head, the liver, and the abdomen after intravenous injection of a running dose of marked Rose Bengal. They specify the technical conditions of this test and report an experience which corroborate its value, its accuracy and the interest of its using in the different types of jaundices (hepatitis and obstructive types). (author) [fr

  9. The need for theory evaluation in global citizenship programmes: The case of the GCSA programme.

    Science.gov (United States)

    Goodier, Sarah; Field, Carren; Goodman, Suki

    2018-02-01

    Many education programmes lack a documented programme theory. This is a problem for programme planners and evaluators as the ability to measure programme success is grounded in the plausibility of the programme's underlying causal logic. Where the programme theory has not been documented, conducting a theory evaluation offers a foundational evaluation step as it gives an indication of whether the theory behind a programme is sound. This paper presents a case of a theory evaluation of a Global Citizenship programme at a top-ranking university in South Africa, subsequently called the GCSA Programme. This evaluation highlights the need for documented programme theory in global citizenship-type programmes for future programme development. An articulated programme theory produced for the GCSA Programme, analysed against the available social science literature, indicated it is comparable to other such programmes in terms of its overarching framework. What the research found is that most other global citizenship programmes do not have an articulated programme theory. These programmes also do not explicitly link their specific activities to their intended outcomes, making demonstrating impact impossible. In conclusion, we argue that taking a theory-based approach can strengthen and enable outcome evaluations in global citizenship programmes. Copyright © 2017. Published by Elsevier Ltd.

  10. Ülar Mark: loome uut ja iga loomisega lammutame midagi / Ülar Mark ; intervjueerinud Mikk Salu

    Index Scriptorium Estoniae

    Mark, Ülar, 1968-

    2010-01-01

    Eesti Arhitektuurikeskuse juhatuse esimees, arhitekt Ülar Mark Tallinna arhitektuurist ja linna arengust, demokraatlikust linnaruumist. Pikemalt Solarise keskusest, vabadussambast, väikepoodide asemele suurte kaubanduskeskuste tulekust

  11. 9 CFR 592.340 - Supervision of marking and packaging.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Supervision of marking and packaging... § 592.340 Supervision of marking and packaging. (a) Evidence of label approval. Inspection program... evidence that such official identification or packaging material bearing such official identification has...

  12. Marking behavior of Andean bears in an Ecuadorian cloud forest

    NARCIS (Netherlands)

    Filipczyková, Eva; Heitkonig, Ignas; Castellanos, Armando; Hantson, Wouter; Steyaert, Sam M.J.G.

    2017-01-01

    Very little is known about marking behavior of the endangered Andean bear (Tremarctos ornatus). Here, we present a first detailed description of Andean bear marking behavior obtained using camera traps. From November 2012 to April 2013, we inspected 16 bear trails in the Napo province of eastern

  13. 27 CFR 26.106 - Marking containers of beer.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Marking containers of beer... Liquors and Articles in Puerto Rico Beer § 26.106 Marking containers of beer. Containers of beer of Puerto... brewer; the serial number, capacity, and size of the container; the kind of beer; and the serial number...

  14. 32 CFR 2400.16 - Derivative classification markings.

    Science.gov (United States)

    2010-07-01

    ... SECURITY PROGRAM Derivative Classification § 2400.16 Derivative classification markings. (a) Documents... 32 National Defense 6 2010-07-01 2010-07-01 false Derivative classification markings. 2400.16..., as described in § 2400.12 of this part, the information may not be used as a basis for derivative...

  15. Maaväline lind Mark Raidpere / Fagira D. Morti

    Index Scriptorium Estoniae

    Fagira D. Morti, pseud., 1974-

    2009-01-01

    Soome Vabariigi president Tarja Halonen andis 28. veebruaril 2009. aastal Kumu Kunstimuuseumis videokunstnik Mark Raidperele üle Ars Fennica kunstipreemia. Meenutusi kunstniku EHI-s õppimise ajast, esimese näituse "Ilo" avamisest Vaal galeriis. Mark Raidpere loomingu mõistmisest

  16. 76 FR 11432 - Coding of Design Marks in Registrations

    Science.gov (United States)

    2011-03-02

    ...] Coding of Design Marks in Registrations AGENCY: United States Patent and Trademark Office, Commerce... practice of coding newly registered trademarks that include a design element with design mark codes based... notice and request for comments at 75 FR 81587, proposing to discontinue a secondary system of coding...

  17. Multi-Disciplinary Peer-Mark Moderation of Group Work

    Science.gov (United States)

    Willmot, Peter; Pond, Keith

    2012-01-01

    Self and peer assessment offers benefits for enhancing student learning. Peer moderation provides a convenient solution for awarding individual marks in group assignments. This paper provides a significant review of peer-mark moderation, and describes an award winning, web-based tool that was developed in the UK and is now spreading across the…

  18. Selection of gender marked morphemes in speech production

    NARCIS (Netherlands)

    Schriefers, H.J.; Jescheniak, J.D.; Hantsch, A.

    2005-01-01

    N.O. Schiller and A. Caramazza (2003) and A. Costa, D. Kovacic, E. Fedorenko, and A. Caramazza (2003) have argued that the processing of freestanding gender-marked morphemes (e.g., determiners) and bound gender-marked morphemes (e.g., adjective suffixes) during syntactic encoding in speech

  19. 27 CFR 26.207 - Destruction of marks and brands.

    Science.gov (United States)

    2010-04-01

    ... brands. 26.207 Section 26.207 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Products Coming Into the United States From the Virgin Islands § 26.207 Destruction of marks and brands. The marks, brands, and serial numbers required by this part to be placed on barrels, casks, or similar...

  20. 27 CFR 26.41 - Destruction of marks and brands.

    Science.gov (United States)

    2010-04-01

    ... brands. 26.41 Section 26.41 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Products Coming Into the United States From Puerto Rico § 26.41 Destruction of marks and brands. The marks, brands, and serial numbers required by this part to be placed on barrels, casks, or similar containers...

  1. Mark's story as oral traditional literature: Rethinking the transmission ...

    African Journals Online (AJOL)

    The interpretation of Mark's gospel is inextricably linked to a conception of the gospel's genesis. By basing his argument on an aspect of the 'oral formulaic theory' the author of this paper argues that Mark's gospel can be seen as an example of oral traditional composition. The primary asset of this perspective is that it ...

  2. 7 CFR 319.37-10 - Marking and identity.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Marking and identity. 319.37-10 Section 319.37-10 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION..., and Other Plant Products 1,2 § 319.37-10 Marking and identity. (a) Any restricted article for...

  3. Otolith marking of juvenile shortnose gar by immersion in oxytetracycline

    Science.gov (United States)

    Snow, Richard A.; Long, James M.

    2017-01-01

    Oxytetracycline (OTC) has been used to mark a variety of fish species at multiple developmental stages; however, there is little information on batch-marking Lepisosteidae. Juvenile Shortnose Gar Lepisosteus platostomus (53 ± 3 mm TL) were seined from an Oklahoma State University research pond and transported to the Oklahoma Fishery Research Lab. Juvenile Shortnose Gar were exposed to a range of OTC concentrations—0, 500, 600, and 700 mg/L—for 4, 5, or 6 h. Lapillus and sagitta otoliths were examined 14 d postexposure for mark presence and evaluation using fluorescent microscopy. Overall, 93.3% of otoliths exposed to OTC exhibited a mark. Concentration of OTC affected the mean mark quality, whereas duration and otolith type examined did not. However, as concentration increased, so did mortality, suggesting a balance is needed to achieve marking goals. Based on our findings, batch marking of Shortnose Gar can be successful at OTC concentrations from 500 to 700 mg/L for 4–6 h, although mark quality may vary and mortality rates increase at the higher concentrations and longer durations.

  4. 46 CFR 160.077-31 - PFD Marking.

    Science.gov (United States)

    2010-10-01

    ... Marking. (a) General. Each hybrid PFD must be marked with the applicable information required by this... text of special purpose or limitation and vessel(s) or vessel type(s), noted on approval certificate... and be presented in the exact order shown: Type [II, III, or V, as applicable] PFD [See paragraph (k...

  5. Administering and Detecting Protein Marks on Arthropods for Dispersal Research.

    Science.gov (United States)

    Hagler, James R; Machtley, Scott A

    2016-01-28

    Monitoring arthropod movement is often required to better understand associated population dynamics, dispersal patterns, host plant preferences, and other ecological interactions. Arthropods are usually tracked in nature by tagging them with a unique mark and then re-collecting them over time and space to determine their dispersal capabilities. In addition to actual physical tags, such as colored dust or paint, various types of proteins have proven very effective for marking arthropods for ecological research. Proteins can be administered internally and/or externally. The proteins can then be detected on recaptured arthropods with a protein-specific enzyme-linked immunosorbent assay (ELISA). Here we describe protocols for externally and internally tagging arthropods with protein. Two simple experimental examples are demonstrated: (1) an internal protein mark introduced to an insect by providing a protein-enriched diet and (2) an external protein mark topically applied to an insect using a medical nebulizer. We then relate a step-by-step guide of the sandwich and indirect ELISA methods used to detect protein marks on the insects. In this demonstration, various aspects of the acquisition and detection of protein markers on arthropods for mark-release-recapture, mark-capture, and self-mark-capture types of research are discussed, along with the various ways that the immunomarking procedure has been adapted to suit a wide variety of research objectives.

  6. Object marking in Swahili: Definiteness, specificity, or both ...

    African Journals Online (AJOL)

    This article examines the role of object marking in relation to definiteness and specificity in Swahili. Object marking in general has attracted the attention of many scholars in the field of Bantu linguistics due to the complex nature of object markers (OMs) and varying functions they fulfil in Bantu. Opinions differ on the role of ...

  7. Infrared technique for decoding of invisible laser markings

    Science.gov (United States)

    Haferkamp, Heinz; Jaeschke, Peter; Stein, Johannes; Goede, Martin

    2002-03-01

    Counterfeiting and product piracy continues to be an important issue not only for the Western industry, but also for the society in general. Due to the drastic increase in product imitation and the request for plagiarism protection as well as for reducing thefts there is a high interest in new protection methods providing new security features. The method presented here consists of security markings which are included below paint layers. These markings are invisible for the human eye due to the non-transparency of the upper layers in the visible spectral range. However, the markings can be detected by an infrared technique taking advantage on the partial transparency of the upper paint layers in the IR-region. Metal sheets are marked using laser radiation. The beam of a Nd:YAG-laser provides a modification of the surface structure, resulting in dark markings due to the annealing effect. After coating of the laser-marked material, the markings are invisible for the bare eye. In order to read out the invisible information below the coating, an infrared reflection technique is used. The samples are illuminated with halogen lamps or infrared radiators. Many coating materials (i. e. paints) show a certain transparency in the mid-infrared region, especially between 3 - 5 micrometers . The reflected radiation is detected using an IR-camera with a sensitivity range from 3.4 - 5 micrometers . Due to the different reflection properties between the markings and their surrounding, the information can be detected.

  8. 15 CFR 16.10 - The Department of Commerce Mark.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false The Department of Commerce Mark. 16.10 Section 16.10 Commerce and Foreign Trade Office of the Secretary of Commerce PROCEDURES FOR A VOLUNTARY CONSUMER PRODUCT INFORMATION LABELING PROGRAM § 16.10 The Department of Commerce Mark. The Department of...

  9. 7 CFR 920.303 - Container marking regulations.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container marking regulations. 920.303 Section 920.303... Miscellaneous Provisions § 920.303 Container marking regulations. No handler shall ship any kiwifruit except in accordance with the following terms and conditions: (a) Each package or container of kiwifruit shall bear on...

  10. 27 CFR 26.97 - Marking containers of wine.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Marking containers of wine... Liquors and Articles in Puerto Rico Wine § 26.97 Marking containers of wine. Containers of wine of Puerto... winemaker, the serial number of the container, the kind and taxable grade of the wine, the gallon content...

  11. The IAEA Accident Management Programme

    International Nuclear Information System (INIS)

    Kabanov, L.; Jankowski, M.; Mauersberger, H.

    1993-01-01

    Accident prevention and mitigation programmes and the Emergency Response System (ERS) are important elements of the Agency's activities in the area of nuclear power plant (NPP) safety. Safety Codes and Guides on siting, design, quality assurance and the operation of NPPs have been produced and are used by NPP operating organizations. Nuclear safety evaluation services are provided by the IAEA. The Emergency Response System and the International Nuclear Event Scale (INES) have been developed. The framework for the development of an accident management programme has been set up. The main goal is to develop an Accident Management Manual to provide a systematic, structured approach to the development and implementation of an accident management programme at NPPs. An outline of the Manual has been distributed and the first draft is available. The component parts are: Co-ordinated research programmes (CRPs) on severe accident management and containment behaviour; the use of vulnerability analysis; mitigation of the effects of hydrogen, and generic symptom oriented emergency operating procedures. The IAEA provides guidance by the dissemination of information on methods for accident management; collates information on approaches in this field in different organizations and countries; and arranges exchange of experience and the promulgation of knowledge through the training of NPP managers and senior technical staff. (orig.)

  12. Progress of French nuclear programme

    International Nuclear Information System (INIS)

    Pierrard, J.-H.

    1981-02-01

    The aims of the French nuclear programme launched in 1974 are briefly recalled to mind, as are the projects completed at the end of 1980. The operating results mentioned, particularly concern the new PWR units brought into commercial service in 1980 [fr

  13. Final Draft Programme Support Document

    DEFF Research Database (Denmark)

    Enemark, Ulrika; Schleimann, Finn; Vagnby, Bo Hellisen

    The HSPS III is the third phase of Danish support to the Ghanaian Health Sector. The support is in line with the Ministy of Health's Medium Term Strategy and the Second Five-Year Programme of Work; the latter also bring in line with the Ghana Poverty Reduction Strategy. The majority of funds (340...

  14. The IAEA Accident Management Programme

    Energy Technology Data Exchange (ETDEWEB)

    Kabanov, L.; Jankowski, M.; Mauersberger, H. (International Atomic Energy Agency, Vienna (Austria))

    1993-02-01

    Accident prevention and mitigation programmes and the Emergency Response System (ERS) are important elements of the Agency's activities in the area of nuclear power plant (NPP) safety. Safety Codes and Guides on siting, design, quality assurance and the operation of NPPs have been produced and are used by NPP operating organizations. Nuclear safety evaluation services are provided by the IAEA. The Emergency Response System and the International Nuclear Event Scale (INES) have been developed. The framework for the development of an accident management programme has been set up. The main goal is to develop an Accident Management Manual to provide a systematic, structured approach to the development and implementation of an accident management programme at NPPs. An outline of the Manual has been distributed and the first draft is available. The component parts are: Co-ordinated research programmes (CRPs) on severe accident management and containment behaviour; the use of vulnerability analysis; mitigation of the effects of hydrogen, and generic symptom oriented emergency operating procedures. The IAEA provides guidance by the dissemination of information on methods for accident management; collates information on approaches in this field in different organizations and countries; and arranges exchange of experience and the promulgation of knowledge through the training of NPP managers and senior technical staff. (orig.).

  15. Marine line fish research programme

    CSIR Research Space (South Africa)

    SANCOR

    1979-04-01

    Full Text Available This report outlines the framework for a marine line fish programme under the aegis of the South African National Committee for Oceanographic Research (SANCOR). An attempt is made to assess the state of knowledge about South African marine line...

  16. The RESCueH Programme

    DEFF Research Database (Denmark)

    Søgaard Nielsen, Anette; Nielsen, Bent; Andersen, Kjeld

    2016-01-01

    Excessive alcohol consumption is one of the most important lifestyle factors affecting the disease burden in the Western world. The results of treatment in daily practice are modest at best. The aim of the RESCueH programme is to develop and evaluate methods, which are as practice-near as possible...

  17. Indico CONFERENCE: Define the Programme

    CERN Multimedia

    CERN. Geneva; Ferreira, Pedro

    2017-01-01

    In this tutorial you are going to learn how to define the programme of a conference in Indico. The program of your conference is divided in different “tracks”. Tracks represent the subject matter of the conference, such as “Online Computing”, “Offline Computing”, and so on.

  18. Portugal's Secondary School Modernisation Programme

    Science.gov (United States)

    Heitor, Teresa V.; Freire da Silva, Jose M. R.

    2009-01-01

    The aim of the Secondary School Modernisation Programme, being implemented in Portugal by "Parque Escolar, EPE", is based on the pursuit of quality and makes Portuguese education a potential international benchmark. This paper discusses the strategies adopted to reorganise school spaces. It describes the conceptual model and highlights…

  19. The Information Literacy of Survey Mark Hunting: A Dialogue

    Directory of Open Access Journals (Sweden)

    Jennifer Galas

    2016-11-01

    Full Text Available In Brief: This article makes connections between the ACRL Framework for Information Literacy for Higher Education and the activity of survey mark hunting. After a brief review of the literature related to geographic information systems (GIS, information literacy, and gamification of learning, the authors enter into a dialogue in which they discover and describe the various ways information literacy is both required by and developed through the recreational activity of survey mark hunting. Through their dialogue they found that the activity of survey mark hunting relies on the construction of both information and its authority in ways contextualized within the communities that participate; that survey mark hunting is a conversation that builds on the past, where lived experience counts as evidence; and, that survey mark hunting is both a metaphor and embodied enactment of information literacy.

  20. Variable features on Mars. VII - Dark filamentary markings on Mars

    Science.gov (United States)

    Veverka, J.

    1976-01-01

    The paper discusses the location, variability, and possible nature of well-developed patterns of dark filamentary markings in the Mariner 9 photographic records. Although not common on Mars, the markings are concentrated in at least two areas: Depressio Hellespontica and Cerberus/Trivium Charontis. In certain localities, strong winds are required to bring these markings into prominence. The dark filamentary markings seem to be true albedo features controlled by local topography, it being unlikely that they are free linear dunes. The distinctive criss-cross pattern seen in many of the pictures suggests that jointing provides the controlling topographic grid. At this stage it cannot be inferred whether the markings are erosional or depositional in character.

  1. An innovative road marking quality assessment mechanism using computer vision

    Directory of Open Access Journals (Sweden)

    Kuo-Liang Lin

    2016-06-01

    Full Text Available Aesthetic quality acceptance for road marking works has been relied on subjective visual examination. Due to a lack of quantitative operation procedures, acceptance outcome can be biased and results in great quality variation. To improve aesthetic quality acceptance procedure of road marking, we develop an innovative road marking quality assessment mechanism, utilizing machine vision technologies. Using edge smoothness as a quantitative aesthetic indicator, the proposed prototype system first receives digital images of finished road marking surface and has the images processed and analyzed to capture the geometric characteristics of the marking. The geometric characteristics are then evaluated to determine the quality level of the finished work. System is demonstrated through two real cases to show how it works. In the end, a test comparing the assessment results between the proposed system and expert inspection is conducted to enhance the accountability of the proposed mechanism.

  2. [Werkgartner's muzzle imprint mark--a literature study].

    Science.gov (United States)

    Geserick, Gunther; Vendura, Klaus; Wirth, Ingo

    2009-01-01

    Since Werkgartner described and correctly interpreted the muzzle imprint mark around the gunshot entrance wound in 1922, this finding has been generally accepted as a sign of a contact shot. In further studies, it could finally be clarified that the muzzle imprint mark is caused by the expansive power of the powder gases with pressure on and abrasion of the skin at the muzzle (weapon imprint). Its shape depends on the firearm, the ammunition and the anatomical conditions, but does not require a bullet. Examinations under a magnifying glass microscope and histological investigations can complete the macroscopic findings. Occasionally, the muzzle imprint mark requires a certain "drying period" in order to become clearly visible. In rare cases, muzzle imprint marks also form on textiles perforated by the projectile. Characteristically shaped muzzled imprint marks can provide clues to the type of the firearm and its position at the time of discharge.

  3. Lane marking detection based on waveform analysis and CNN

    Science.gov (United States)

    Ye, Yang Yang; Chen, Hou Jin; Hao, Xiao Li

    2017-06-01

    Lane markings detection is a very important part of the ADAS to avoid traffic accidents. In order to obtain accurate lane markings, in this work, a novel and efficient algorithm is proposed, which analyses the waveform generated from the road image after inverse perspective mapping (IPM). The algorithm includes two main stages: the first stage uses an image preprocessing including a CNN to reduce the background and enhance the lane markings. The second stage obtains the waveform of the road image and analyzes the waveform to get lanes. The contribution of this work is that we introduce local and global features of the waveform to detect the lane markings. The results indicate the proposed method is robust in detecting and fitting the lane markings.

  4. Using road markings as a continuous cue for speed choice.

    Science.gov (United States)

    Charlton, Samuel G; Starkey, Nicola J; Malhotra, Neha

    2018-08-01

    The potential for using road markings to indicate speed limits was investigated in a driving simulator over the course of two sessions. Two types of experimental road markings, an "Attentional" set designed to provide visually distinct cues to indicate speed limits of 60, 80 and 100 km/h, and a "Perceptual" set designed to also affect drivers' perception of speed, were compared to a standard undifferentiated set of markings. Participants (n = 20 per group) were assigned to one of four experimental groups (Attentional-Explicit, Attentional-Implicit, Perceptual-Explicit, Perceptual-Implicit) or a Control group (n = 22; standard road markings). The Explicit groups were instructed about the meaning of the road markings while those in the Implicit and Control groups did not receive any explanation. Participants drove five 10 km simulated roads containing three speed zones (60, 80 and 100 km/h) during the first session. The participants returned to the laboratory approximately 3 days later to drive five more trials including roads they had not seen before, a trial that included a secondary task, and a trial where speed signs were removed and only markings were present. The findings indicated that both types of road markings improved drivers' compliance with speed limits compared to the control group, but that explicit instruction as to the meaning of the markings was needed to realise their full benefit. Although previous research has indicated the benefit of road markings used as warnings to indicate speed reductions in advance of horizontal or vertical curves, the findings of the present experiment also suggest that systematically associating road markings with specific speed limits may be a useful way to improve speed limit compliance and increase speed homogeneity. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  5. Programme documentation to control programme for Solar-tracker; Programdokumentation til styringsprogram til Solar-tracker

    Energy Technology Data Exchange (ETDEWEB)

    Rudbeck, C.

    1995-07-01

    The report contains the programme documentation partly for a programme to control of a tracking system and partly a programme, which uses this programme to make measurements of transmittance for covering layer. Both the transmittance measurement programme and the programme is built in Borland Pascal v7.0, and is compiled in Real mode for the use on a processor of the 80X86-family. The source code for the programme for transmittance measurements and the programmes (the positioning routines) are described in Appendix B. (EHS)

  6. Experimental applications for the MARK-1 and MARK-1A pulsed ionizing radiation detection systems. Volume 3

    International Nuclear Information System (INIS)

    Harker, Y.D.; Lawrence, R.S.; Yoon, W.Y.; Lones, J.L.

    1993-12-01

    This report is the third volume in a three volume set describing the MARK series of pulsed ionizing radiation detection systems. This volume describes the MARK-1A detection system, compares it with the MARK-1 system, and describes the experimental testing of the detection systems. Volume 1 of this set presents the technical specifications for the MARK-1 detection system. Volume 2 is an operations manual specifically for the MARK-1 system, but it generally applies to the MARK-1A system as well. These detection systems operate remotely and detect photon radiation from a single or a multiple pulsed source. They contain multiple detector (eight in the MARK-1 and ten in the MARK-1A) for determination of does and incident photon effective energy. The multiple detector arrangement, having different detector sizes and shield thicknesses, provides the capability of determining the effective photon energy of the radiation spectrum. Dose measurements using these units are consistent with TLD measurements. The detection range is from 3 nanorads to 90 microrads per source burst; the response is linear over that range. Three units were built and are ready for field deployment

  7. Thermal spectra of the TRIGA Mark III reactor; El espectro termico del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Macias B, L.R.; Palacios G, J. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1998-07-01

    The diffraction phenomenon is gave in observance of the well known Bragg law in crystalline materials and this can be performance by mean of X-rays, electrons and neutrons among others, which allows to do inside the field of each one of these techniques the obtaining of measurements focussed at each one of them. For the present work, it will be mentioned only the referring to X-ray and neutron techniques. The X-ray diffraction due to its properties just it does measurements which are known in general as superficial measurements of the sample material but for the properties of the neutrons, this diffraction it explores in volumetric form the sample material. Since the neutron diffraction process depends lots of its intensity, then it is important to know the neutron source spectra that in this case is supplied by the TRIGA Mark III reactor. Within of diffraction techniques a great number of them can be found, however some of the traditional will be mentioned such as the identification of crystalline samples, phases identification and the textures measurement. At present this last technique is founded on the dot of a minimum error and the technique of phases identification performs but not compete with that which is obtained by mean of X-rays due to this last one has a major resolution. (Author)

  8. Detection and recognition of road markings in panoramic images

    Science.gov (United States)

    Li, Cheng; Creusen, Ivo; Hazelhoff, Lykele; de With, Peter H. N.

    2015-03-01

    Detection of road lane markings is attractive for practical applications such as advanced driver assistance systems and road maintenance. This paper proposes a system to detect and recognize road lane markings in panoramic images. The system can be divided into four stages. First, an inverse perspective mapping is applied to the original panoramic image to generate a top-view road view, in which the potential road markings are segmented based on their intensity difference compared to the surrounding pixels. Second, a feature vector of each potential road marking segment is extracted by calculating the Euclidean distance between the center and the boundary at regular angular steps. Third, the shape of each segment is classified using a Support Vector Machine (SVM). Finally, by modeling the lane markings, previous falsely detected segments can be rejected based on their orientation and position relative to the lane markings. Our experiments show that the system is promising and is capable of recognizing 93%, 95% and 91% of striped line segments, blocks and arrows respectively, as well as 94% of the lane markings.

  9. The JOSHUA (J80) system programmer`s manual

    Energy Technology Data Exchange (ETDEWEB)

    Smetana, A.O.; McCort, J.T.; Westmoreland, B.W.

    1993-08-01

    The JOSHUA system routines (JS routines) can be used to manage a JOSHUA data base and execute JOSHUA modules on VAX/VMS and IBM/MVS computer systems. This manual provides instructions for using the JS routines and information about the internal data structures and logic used by the routines. It is intended for use primarily by JOSHUA systems programmers, however, advanced applications programmers may also find it useful. The JS routines are, as far as possible, written in ANSI FORTRAN 77 so that they are easily maintainable and easily portable to different computer systems. Nevertheless, the JOSHUA system provides features that are not available in ANSI FORTRAN 77, notably dynamic module execution and a data base of named, variable length, unformatted records, so some parts of the routines are coded in nonstandard FORTRAN or assembler (as a last resort). In most cases, the nonstandard sections of code are different for each computer system. To make it easy for programmers using the JS routines to avoid naming conflicts, the JS routines and common block all have six character names that begin with the characters {open_quotes}JS.{close_quotes} Before using this manual, one should be familiar with the JOSHUA system as described in {open_quotes}The JOSHUA Users` Manual,{close_quotes} ANSI FORTRAN 77, and at least one of the computer systems for which the JS routines have been implemented.

  10. Planning and implementation of nuclear research programmes

    International Nuclear Information System (INIS)

    Lopes, J.L.

    1986-01-01

    The planning and implementation of nuclear research programmes in developed and developing countries is discussed. The main aspects of these programmes in USA, France, Japan, India and Brazil are reported. (M.W.O.) [pt

  11. Sustainable Industrial Development Programmes of International ...

    African Journals Online (AJOL)

    However, more insightful corporate entrepreneurship programmes with improved infrastructural and electric power facilities should be encouraged. Increasing support to firms through diverse channels would boost rapid economic development of the sub region. Key words: Sustainable programmes, economic development, ...

  12. South African Antarctic earth science research programme

    CSIR Research Space (South Africa)

    SASCAR

    1984-02-01

    Full Text Available This document describes the past, current and planned future South African earth science research programme in the Antarctic, Southern Ocean and subantarctic regions. The scientific programme comprises five components into which present and future...

  13. Problems with ink skin markings for radiation field setups

    International Nuclear Information System (INIS)

    Endoh, Masaru; Saeki, Mituaki; Ishida, Yusei

    1982-01-01

    Ink skin markings are used in radiation therapy to aid in reproduction of treatment field setups or to indelibly outline field markings or tumors. We reported two cases of indelible ink skin for radiation field septa with minimal discomfort and dermatitis have been experienced for 6 months and above since end of radiotherapy. These indelible ink skin markings look like tattoo that will be big problems in the case of young female. We improved these problems by using of 10 percent silver nitrate instead of habitual skin ink. (author)

  14. A theory evaluation of an induction programme

    Directory of Open Access Journals (Sweden)

    Kenrick Hendricks

    2012-07-01

    Full Text Available Orientation: An induction programme is commonly used to help new employees understand their job within the organisation. Research purpose: The main aim of this study was to examine whether or not the programme theory of an induction programme was plausible and would lead to the intended outcomes as described by the programme manager. Motivation for the study: Induction training is one of the most common training programmes in an organisation. However, there is little research to evaluate whether or not the activities of an induction programme will lead to the intended outcomes of such a programme. Research design, approach and method: This theory evaluation used a descriptive design. One hundred and thirteen employees of a media company completed a ten-item, five-point Likert scale which measured their perceptions of the programme’s outcome, identification with the organisation and intentions to stay with the organisation. Main findings: From this theory evaluation it was apparent that an induction programme based on an implausible programme theory could be problematic. An implausible programme theory affects the design of the programme activities and unsuitable activities may not deliver the desired outcomes. Practical/managerial implications: The intention of the evaluation is to guide human resource managers through a process of replacing an implausible programme theory with one that is plausible, and which ensures better alignment of programme activities and outcomes. Contribution/value-add: The evaluators showed how a plausible programme theory could improve programme design. This redesigned induction programme may lead to benefits, such as staff retention and company identification, rather than the vague assumption that it has been conforming to a legal obligation.

  15. Practical assessment of the SWMM programme

    Science.gov (United States)

    Hlustik, P.

    2017-10-01

    The article describes the advantages and disadvantages of the SWMM programme user environment when working with it. The Storm Water Management Model (SWMM) is a programme developed by the U.S. EPA (United States Environmental Protection Agency). The SWMM programme is used worldwide to plan, analyse and design rainfall-runoff, combined and separate sanitary sewage systems and other drainage systems in urban areas [1]. The programme is freely available to download from the U.S. EPA website [2].

  16. National and regional asthma programmes in Europe

    OpenAIRE

    Olof Selroos; Maciej Kupczyk; Piotr Kuna; Piotr Łacwik; Jean Bousquet; David Brennan; Susanna Palkonen; Javier Contreras; Mark FitzGerald; Gunilla Hedlin; Sebastian L. Johnston; Renaud Louis; Leanne Metcalf; Samantha Walker; Antonio Moreno-Galdó

    2015-01-01

    This review presents seven national asthma programmes to support the European Asthma Research and Innovation Partnership in developing strategies to reduce asthma mortality and morbidity across Europe. From published data it appears that in order to influence asthma care, national/regional asthma programmes are more effective than conventional treatment guidelines. An asthma programme should start with the universal commitments of stakeholders at all levels and the programme has to be endorse...

  17. JavaScript programmer's reference

    CERN Document Server

    Valentine, Thomas

    2013-01-01

    JavaScript Programmer's Reference is an invaluable resource that won't stray far from your desktop (or your tablet!). It contains detailed information on every JavaScript object and command, and combines that reference with practical examples showcasing how you can use those commands in the real world. Whether you're just checking the syntax of a method or you're starting out on the road to JavaScript mastery, the JavaScript Programmer's Reference will be an essential aid.  With a detailed and informative tutorial section giving you the ins and outs of programming with JavaScript and the DOM f

  18. Social skills programmes for schizophrenia.

    Science.gov (United States)

    Almerie, Muhammad Qutayba; Okba Al Marhi, Muhammad; Jawoosh, Muhammad; Alsabbagh, Mohamad; Matar, Hosam E; Maayan, Nicola; Bergman, Hanna

    2015-06-09

    Social skills programmes (SSP) are treatment strategies aimed at enhancing the social performance and reducing the distress and difficulty experienced by people with a diagnosis of schizophrenia and can be incorporated as part of the rehabilitation package for people with schizophrenia. The primary objective is to investigate the effects of social skills training programmes, compared to standard care, for people with schizophrenia. We searched the Cochrane Schizophrenia Group's Trials Register (November 2006 and December 2011) which is based on regular searches of CINAHL, BIOSIS, AMED, EMBASE, PubMed, MEDLINE, PsycINFO, and registries of clinical trials. We inspected references of all identified studies for further trials.A further search for studies has been conducted by the Cochrane Schizophrenia Group in 2015, 37 citations have been found and are currently being assessed by review authors. We included all relevant randomised controlled trials for social skills programmes versus standard care involving people with serious mental illnesses. We extracted data independently. For dichotomous data we calculated risk ratios (RRs) and their 95% confidence intervals (CI) on an intention-to-treat basis. For continuous data, we calculated mean differences (MD) and 95% CIs. We included 13 randomised trials (975 participants). These evaluated social skills programmes versus standard care, or discussion group. We found evidence in favour of social skills programmes compared to standard care on all measures of social functioning. We also found that rates of relapse and rehospitalisation were lower for social skills compared to standard care (relapse: 2 RCTs, n = 263, RR 0.52 CI 0.34 to 0.79, very low quality evidence), (rehospitalisation: 1 RCT, n = 143, RR 0.53 CI 0.30 to 0.93, very low quality evidence) and participants' mental state results (1 RCT, n = 91, MD -4.01 CI -7.52 to -0.50, very low quality evidence) were better in the group receiving social skill programmes

  19. The vaccination programme in Indonesia.

    Science.gov (United States)

    Sawitri Siregar, E; Darminto; Weaver, J; Bouma, A

    2007-01-01

    The Indonesian response to the outbreak of highly pathogenic avian influenza (HPAI) is being strengthened by increased intersectoral commitment and greater availability of staff and resources. Vaccination against avian influenza has been used widely in large commercial sectors but less so in other sectors. Generally, there has been a reduction in outbreaks and in the impact of HPAI on the commercial industry. Afield trial is described that might provide insight into the efficacy of vaccination on farms in sector 3. Preliminary data suggest that vaccination of layers induces high titres, whereas vaccination of native chickens might be difficult owing to a low response in these breeds. A much greater commitment of management, staff and resources is required before vaccination can become part of a successful sustainable campaign to eradicate HPAI. For success, the commercial poultry industry must become an integral part of the control programme, providing information and having the opportunity to identify or modify the priorities of the control programme.

  20. 21 CFR 870.3700 - Pacemaker programmers.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Pacemaker programmers. 870.3700 Section 870.3700...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3700 Pacemaker programmers. (a) Identification. A pacemaker programmer is a device used to change noninvasively one or more of...

  1. Programme evaluation: Maintaining quality in higher education ...

    African Journals Online (AJOL)

    The evaluation of educational or social programmes is paramount for establishing success or impact in higher education. Evaluation questions about programme goals (e.g. better performance of first-year students) or about the quality of programme strategies (design and implementation) and effectiveness of delivery ...

  2. IMPACT OF SELECTED RURAL DEVELOPMENT PROGRAMMES ...

    African Journals Online (AJOL)

    Administrator

    development programmes in Ikwuano Local Government Area of Abia State, Nigeria. The area under study was .... The programme was later replaced by Family support Programme (FSP). FSP was almost the same with BLP ..... Assessed 15/12/05 2005. FOS. Federal Office of Statistics National Consumers Survey. 1985/86 ...

  3. Programme Evaluation: Maintaining Quality in Higher Education

    Science.gov (United States)

    Loots, A.

    2008-01-01

    The evaluation of educational or social programmes is paramount for establishing success or impact in higher education. Evaluation questions about programme goals (e.g. better performance of first-year students) or about the quality of programme strategies (design and implementation) and effectiveness of delivery (coordinator inputs and…

  4. Unauthorised adaptation of computer programmes - is ...

    African Journals Online (AJOL)

    Haupt acquired copyright in the Data Explorer programme regardless of the fact that the programme was as a result of an unauthorised adaptation of the Project AMPS programme which belonged to Brewers Marketing Intelligence (Pty) Ltd. This case note inter alia analyses the possibility of an author being sued for ...

  5. LEP Celebration : the official programme

    CERN Multimedia

    CERN. Geneva

    2000-10-09

    At 14:00: Groupe de Jazz "Wolfgang & The Werewolves" . The official programme begins at 15:00 with an introduction from the Director General, and Professor Martinus Veltman will give the keynote speech. Heads of national delegations represented at ministerial level will then make their speeches, following which a commemorative plaque will be unveiled. A specially commissioned ballet by Maurice Béjart will bring the ceremony to a close.

  6. IPSN's experimental programmes on fires

    International Nuclear Information System (INIS)

    1999-01-01

    Every year fires occur in nuclear installations as they do in any industrial facility. They feed on cables, electrical equipment cabinets, oils, solvents..., they might lead to the degradation of the safety standard of the installation or they might threaten the confinement of radioactive materials. In this document IPSN presents its experimental programmes and its facilities in Saclay and Cadarache designed to study the triggering and the propagation of fires and flames in closed and ventilated premises. (A.C.)

  7. Low-cost and high-speed optical mark reader based on an intelligent line camera

    Science.gov (United States)

    Hussmann, Stephan; Chan, Leona; Fung, Celine; Albrecht, Martin

    2003-08-01

    Optical Mark Recognition (OMR) is thoroughly reliable and highly efficient provided that high standards are maintained at both the planning and implementation stages. It is necessary to ensure that OMR forms are designed with due attention to data integrity checks, the best use is made of features built into the OMR, used data integrity is checked before the data is processed and data is validated before it is processed. This paper describes the design and implementation of an OMR prototype system for marking multiple-choice tests automatically. Parameter testing is carried out before the platform and the multiple-choice answer sheet has been designed. Position recognition and position verification methods have been developed and implemented in an intelligent line scan camera. The position recognition process is implemented into a Field Programmable Gate Array (FPGA), whereas the verification process is implemented into a micro-controller. The verified results are then sent to the Graphical User Interface (GUI) for answers checking and statistical analysis. At the end of the paper the proposed OMR system will be compared with commercially available system on the market.

  8. An intercalated BSc degree is associated with higher marks in subsequent medical school examinations

    Directory of Open Access Journals (Sweden)

    Sinclair Hazel

    2009-05-01

    Full Text Available Abstract Background To compare medical students on a modern MBChB programme who did an optional intercalated degree with their peers who did not intercalate; in particular, to monitor performance in subsequent undergraduate degree exams. Methods This was a retrospective, observational study of anonymised databases of medical student assessment outcomes. Data were accessed for graduates, University of Aberdeen Medical School, Scotland, UK, from the years 2003 to 2007 (n = 861. The main outcome measure was marks for summative degree assessments taken after intercalating. Results Of 861 medical students, 154 (17.9% students did an intercalated degree. After adjustment for cohort, maturity, gender and baseline (3rd year performance in matching exam type, having done an IC degree was significantly associated with attaining high (18–20 common assessment scale (CAS marks in three of the six degree assessments occurring after the IC students rejoined the course: the 4th year written exam (p th year OSCE (p = 0.001 and the 5th year Elective project (p = 0.010. Conclusion Intercalating was associated with improved performance in Years 4 and 5 of the MBChB. This improved performance will further contribute to higher academic ranking for Foundation Year posts. Long-term follow-up is required to identify if doing an optional intercalated degree as part of a modern medical degree is associated with following a career in academic medicine.

  9. Fifty tours are being planned to mark CERN's 50th anniversary

    CERN Multimedia

    2004-01-01

    On 16 October 2004, CERN will open its doors to the public. The Visits Service is already busy with preparations for this day of special events to mark the fiftieth anniversary and is recruiting volunteers. A date for your diaries! On 16 October 2004, CERN will be holding an Open Day to mark its golden jubilee. The public will be invited to discover 50 years of history through tours of 50 different sites. Over thirty sites for the tours have already been identified, including the experiment halls, the assembly halls for the LHC detectors and magnets as well as the computer centre and the fire station. With a programme offering tours, talks, a play on a scientific theme and a variety of workshops, there will be something for everybody. A number of evening tours will be organised specifically for the inhabitants of Cessy, St Genis, Meyrin and Ferney Voltaire, where the experiment halls for CMS, ALICE, ATLAS and LHCb are respectively located. An area will even be set aside with stimulating games to enterta...

  10. Employers’ Perception on Internship Programme

    Directory of Open Access Journals (Sweden)

    Mohaidin Nur Jannah

    2017-01-01

    Full Text Available Internship program is compulsory for Bachelor in Accounting (BIA students in University Kuala Lumpur (UniKL. We believed internship program is useful to facilitate students learning opportunities outside classroom. These experiences provide the opportunity to apply classroom theory into real working environment thus enhancing students’ academic and career goals. Constructive comments from supervisor will give us indicator that we must prepare the students with all aspects of accounting wide knowledge. Employer’s feedback is important in preparing the students for the industry by developing a better programme structure and subjects offered. It is indirectly improves the lecturers’ teaching methods and skills. Therefore, this paper explores the employers’ perception towards internship programme for accounting students in Universiti Kuala Lumpur. Data was collected from employer’s feedback form using five point-likert scales distributed to employers of the participating companies from Semester January 2013 to Semester January 2015. The evaluation form is used to evaluate the students’ performance throughout their 6 months internship period. The statistical results found that student’s score is positively associated with employer’s feedback. The results also indicate that the employers’ perception is important for the students in preparing themselves for the industry and for the university in developing proper programme structure.

  11. Plea to lower English test pass marks for EEA nurses.

    Science.gov (United States)

    Longhurst, Chris

    2017-08-09

    Nurses from a group campaigning for the rights of EU citizens in the UK after Brexit are meeting the Nursing and Midwifery Council (NMC) to press for the pass mark for English language tests to be lowered.

  12. Minimization of sink mark defects in injection molding process ...

    African Journals Online (AJOL)

    user

    3Institute of Remote Sensing, Anna University, Chennai-600025, INDIA .... Most of the Taguchi based studies used sink mark index or sink index as the parameter. It is an .... Maintaining higher pack pressure requires additional power and cost.

  13. 51. Veneetsia kunstibiennaalil esindab Eestit kunstnik Mark Raidpere...

    Index Scriptorium Estoniae

    2005-01-01

    Mark Raidpere ekspositsiooni "Varjupaik" on koostanud Hanno Soans. 12. VI-6. XI avatud biennaalil on kaks peakuraatorit ja kaks teemanäitust: Maria de Corrali kureeritud "Kunsti kogemus" ja Rosa Martinezi kureeritud "Alati pisut eespool"

  14. Acquaintance of bite mark identification procedures in Forensic Odontology

    Directory of Open Access Journals (Sweden)

    Yuti Malinda

    2017-08-01

    Conclution: Dentist should carefully determine the conclusion among these possibilities , the mark is “possible biter”, “probable biter”, or “with a high level of confidence, is the biter”

  15. Full-Scale Mark II CRT Program data report, 1

    International Nuclear Information System (INIS)

    Namatame, Ken; Kukita, Yutaka; Yamamoto, Nobuo; Shiba, Masayoshi

    1979-12-01

    The Full-Scale Mark II CRT (Containment Response Test) Program was initiated in April 1976 to provide a full-scale data basis for the evaluation of the pressure suppression pool hydrodynamic loads associated with a hypothetical LOCA in a BWR Mark II Containment. The test facility, completed in March 1979, is 1/18 in volume of a typical 1100 MWe Mark II, and has a wetwell which is a full-scale replica of one 20 0 -sector of that of the reference Mark II. The present report documents experimental data from TEST 0002, a medium size (100 mm) water blowdown test, performed by Hitachi Ltd. for JAERI as the second of the four shakedown tests. Test data is provided for the vessel depressurization, the pressure and temperature responses in the test containment, and especially for the chugging phenomena associated with low flux steam condensation in the pool. (author)

  16. Safety performance evaluation of converging chevron pavement markings : final report.

    Science.gov (United States)

    2014-12-01

    The objectives of this study were (1) to perform a detailed safety analysis of converging chevron : pavement markings, quantifying the potential safety benefits and developing an understanding of the : incident types addressed by the treatment, and (...

  17. Campus lecture marks Conflict Resolution Day Oct. 21

    OpenAIRE

    Owczarski, Mark

    2010-01-01

    Virginia Tech's Conflict Resolution Program will sponsor a video conference presentation by Craig Runde and Tim Flanagan, co-authors of three books on conflict in the workplace, as the university marks International Conflict Resolution Day Thursday, Oct. 21.

  18. Inland Waters - Navigation Distance Mark - Minnesota River (Non-Navigable)

    Data.gov (United States)

    Army Corps of Engineers, Department of the Army, Department of Defense — A distance mark indicates the distance measured from an origin and consists of a distinct location without special installation, used to serve as a reference along...

  19. 46 CFR 160.021-5 - Labeling and marking.

    Science.gov (United States)

    2010-10-01

    ...: Stand with back to wind and point away from body when igniting or flare is burning. Service Life....__). Manufactured by (Name and address of manufacturer). U.S. Coast Guard Approval No.__ (b) Marking of expiration...

  20. 46 CFR 160.037-5 - Labeling and marking.

    Science.gov (United States)

    2010-10-01

    .... Caution: Stand with back to wind and point away from body when igniting or signal is burning. Service Life.... __). Manufactured by (Name and address of manufacturer). U.S. Coast Guard Approval No. __. (b) Marking of expiration...

  1. Viktor Misiano kureerib Mark Raidperet ning Jaan Toomikut

    Index Scriptorium Estoniae

    2007-01-01

    27.05-26.08.2007 esitatakse Itaalia kunstikeskuses Pratos näitusel "Progressive Nostalgia" Jaan Toomiku videot "Merikajakas" (2004) ja Mark Raidpere videot "Andrei/Andris" (2006). Loetletud osalejad teistest maadest

  2. 27 CFR 19.605 - Additional marks on portable containers.

    Science.gov (United States)

    2010-04-01

    ... “Tax-Free.” (b) The proprietor may show other information such as brand or trade name; caution notices... plant control data. However, marks or attachments shall not conceal, obscure, interfere with or conflict...

  3. Continuous assessment and matriculation examination marks – An empirical examination

    Directory of Open Access Journals (Sweden)

    Servaas van der Berg

    2015-12-01

    This study compares CASS data to the externally assessed matric exam marks for a number of subjects. There are two signalling dimensions to inaccurate assessments: (i Inflated CASS marks can give students a false sense of security and lead to diminished exam effort. (ii A weak correlation between CASS and the exam marks could mean poor signalling in another dimension: Relatively good students may get relatively low CASS marks. Such low correlations indicate poor assessment reliability, as the examination and continuous assessment should both be testing mastery of the same national curriculum. The paper analyses the extent of each of these dimensions of weak signalling in South African schools and draws disturbing conclusions for a large part of the school system.

  4. Meet EPA Chemist Mark Strynar, Ph.D.

    Science.gov (United States)

    Dr. Mark Strynar is a physical scientist in EPA's Office of Research and Development. His research interests include developing methods to measure and analyze the movement of PFCs and other xenobiotic compounds in biological and environmental media

  5. Evaluation of portable retroreflectometer for use on pavement marking materials.

    Science.gov (United States)

    1981-01-01

    The subjective rating of the night visibility of pavement marking materials is difficult as it can be influenced by many variables. In an attempt to provide an improved method of determining the night visibility of these materials, a portable retrore...

  6. Skype'i kaasasutajad investeerivad MarkIT-isse

    Index Scriptorium Estoniae

    2007-01-01

    Nelja eestlasest Skype'i kaasasutaja loodud Ambient Sound Investments (ASI) investeerib 2 miljonit eurot, et aidata kaasa MarkIT e-hankekeskkonna arendamisele ning ettevõtte laienemisele viide Kesk- ja Ida-Euroopa riiki

  7. Life cycle and economic efficiency analysis: durable pavement markings.

    Science.gov (United States)

    2009-07-01

    This project examined the life cycle and economic efficiency of two pavement marking : materials inlaid tape and thermoplastic to find the most economical product for specific : traffic and weather conditions. Six locations in the state of Ma...

  8. histone H3 predominantly mark the pericentromeric chromatin

    Indian Academy of Sciences (India)

    SANTOSH KUMAR SHARMA

    packaging of eukaryotic DNA in nucleoprotein complex known as .... The plant material used in the present study has ... materials (root tips/flower buds) were fixed in PHEMES ..... fications that mark active chromatin, while there are no data.

  9. 27 CFR 26.206 - Marking packages and cases.

    Science.gov (United States)

    2010-04-01

    ... Coming Into the United States From the Virgin Islands § 26.206 Marking packages and cases. The distiller... distiller, rectifier, or bottler shall plainly print, stamp, or stencil with durable coloring material, in...

  10. 131 The Ambiguity of Musical Expression Marks and the Challenges ...

    African Journals Online (AJOL)

    'tender' art in Nigerian higher institutions where most learners start at a relatively ... expression/performance marks as 'symbols and words or phrases and their .... involves the study of the teaching of the motor, intellectual, problem solving, ...

  11. Linguistic gender marking and its international business ramifications

    OpenAIRE

    Estefania Santacreu-Vasut; Oded Shenkar; Amir Shoham

    2014-01-01

    We analyze the impact of language-based gender distinctions within languages’ grammatical structures on women’s corporate presence. Using four different data sets, we find that countries where the dominant language marks gender more intensely have significantly lower female participation on boards of directors and in senior management, as well as smaller female-led corporate teams. We also find that the gender marking of the language used in the headquarters’ home country impacts female prese...

  12. Aksel Mark: kõik algaski Otsal / Enn Nõu

    Index Scriptorium Estoniae

    Nõu, Enn, 1933-

    2012-01-01

    Arvustus: Mark Beijer, Mai. Landkänning : Brevväxling mellan Anu och Aksel Mark under deras första år som flyktingar från Estland 1944-45. Stockholm : Bokverksta´n Förlag, 2008; Allt började på Otsa : minnen från min barndom och skoláren. Stockholm : Beijer Bok & Skog, 2011

  13. Regulation of glucose homeostasis by KSR1 and MARK2.

    Directory of Open Access Journals (Sweden)

    Paula J Klutho

    Full Text Available Protein scaffolds control the intensity and duration of signaling and dictate the specificity of signaling through MAP kinase pathways. KSR1 is a molecular scaffold of the Raf/MEK/ERK MAP kinase cascade that regulates the intensity and duration of ERK activation. Relative to wild-type mice, ksr1⁻/⁻ mice are modestly glucose intolerant, but show a normal response to exogenous insulin. However, ksr1⁻/⁻ mice also demonstrate a three-fold increase in serum insulin levels in response to a glucose challenge, suggesting a role for KSR1 in insulin secretion. The kinase MARK2 is closely related to C-TAK1, a known regulator of KSR1. Mice lacking MARK2 have an increased rate of glucose disposal in response to exogenous insulin, increased glucose tolerance, and are resistant to diet-induced obesity. mark2⁻/⁻ksr1⁻/⁻ (DKO mice were compared to wild type, mark2⁻/⁻, and ksr1⁻/⁻ mice for their ability to regulate glucose homeostasis. Here we show that disruption of KSR1 in mark2⁻/⁻ mice reverses the increased sensitivity to exogenous insulin resulting from MARK2 deletion. DKO mice respond to exogenous insulin similarly to wild type and ksr1⁻/⁻ mice. These data suggest a model whereby MARK2 negatively regulates insulin sensitivity in peripheral tissue through inhibition of KSR1. Consistent with this model, we found that MARK2 binds and phosphorylates KSR1 on Ser392. Phosphorylation of Ser392 is a critical regulator of KSR1 stability, subcellular location, and ERK activation. These data reveal an unexpected role for the molecular scaffold KSR1 in insulin-regulated glucose metabolism.

  14. Preoperative stoma site marking in the general surgery population.

    Science.gov (United States)

    Zimnicki, Katherine M

    2013-01-01

    Preoperative teaching and stoma site marking are supported by research and professional organizations as interventions that can reduce the incidence of problematic stomas and improve patient outcomes. This study investigated the translation of this research into practice in the acute care surgery population. A retrospective chart review using convenience sampling was conducted at a large urban hospital in the Midwestern United States. Thirty patients underwent a surgical procedure that resulted in the creation of a fecal ostomy over a 5-month period. Descriptive statistical analysis examined the reason for surgery, preoperative length of stay (LOS), the percentage of patients who received preoperative teaching and stoma marking and the relationship between preoperative LOS and the use of preoperative teaching and stoma marking. Twenty-one of 30 patients were admitted to hospital 24 hours or more before surgery. No participants were admitted urgently. Three (14%) of those admitted for more than 24 hours received preoperative marking or teaching. There was no significant relationship between preoperative LOS and preoperative teaching and stoma marking. The opportunity exists to promote successful adaptation in this surgical population through the implementation of the evidence-based interventions of preoperative teaching and stoma marking. Additional study is needed to determine barriers to their use as well as to develop effective implementation strategies.

  15. AUTOMATIC EXTRACTION OF ROAD MARKINGS FROM MOBILE LASER SCANNING DATA

    Directory of Open Access Journals (Sweden)

    H. Ma

    2017-09-01

    Full Text Available Road markings as critical feature in high-defination maps, which are Advanced Driver Assistance System (ADAS and self-driving technology required, have important functions in providing guidance and information to moving cars. Mobile laser scanning (MLS system is an effective way to obtain the 3D information of the road surface, including road markings, at highway speeds and at less than traditional survey costs. This paper presents a novel method to automatically extract road markings from MLS point clouds. Ground points are first filtered from raw input point clouds using neighborhood elevation consistency method. The basic assumption of the method is that the road surface is smooth. Points with small elevation-difference between neighborhood are considered to be ground points. Then ground points are partitioned into a set of profiles according to trajectory data. The intensity histogram of points in each profile is generated to find intensity jumps in certain threshold which inversely to laser distance. The separated points are used as seed points to region grow based on intensity so as to obtain road mark of integrity. We use the point cloud template-matching method to refine the road marking candidates via removing the noise clusters with low correlation coefficient. During experiment with a MLS point set of about 2 kilometres in a city center, our method provides a promising solution to the road markings extraction from MLS data.

  16. Multiplexing clonality: combining RGB marking and genetic barcoding

    Science.gov (United States)

    Cornils, Kerstin; Thielecke, Lars; Hüser, Svenja; Forgber, Michael; Thomaschewski, Michael; Kleist, Nadja; Hussein, Kais; Riecken, Kristoffer; Volz, Tassilo; Gerdes, Sebastian; Glauche, Ingmar; Dahl, Andreas; Dandri, Maura; Roeder, Ingo; Fehse, Boris

    2014-01-01

    RGB marking and DNA barcoding are two cutting-edge technologies in the field of clonal cell marking. To combine the virtues of both approaches, we equipped LeGO vectors encoding red, green or blue fluorescent proteins with complex DNA barcodes carrying color-specific signatures. For these vectors, we generated highly complex plasmid libraries that were used for the production of barcoded lentiviral vector particles. In proof-of-principle experiments, we used barcoded vectors for RGB marking of cell lines and primary murine hepatocytes. We applied single-cell polymerase chain reaction to decipher barcode signatures of individual RGB-marked cells expressing defined color hues. This enabled us to prove clonal identity of cells with one and the same RGB color. Also, we made use of barcoded vectors to investigate clonal development of leukemia induced by ectopic oncogene expression in murine hematopoietic cells. In conclusion, by combining RGB marking and DNA barcoding, we have established a novel technique for the unambiguous genetic marking of individual cells in the context of normal regeneration as well as malignant outgrowth. Moreover, the introduction of color-specific signatures in barcodes will facilitate studies on the impact of different variables (e.g. vector type, transgenes, culture conditions) in the context of competitive repopulation studies. PMID:24476916

  17. Automatic Extraction of Road Markings from Mobile Laser Scanning Data

    Science.gov (United States)

    Ma, H.; Pei, Z.; Wei, Z.; Zhong, R.

    2017-09-01

    Road markings as critical feature in high-defination maps, which are Advanced Driver Assistance System (ADAS) and self-driving technology required, have important functions in providing guidance and information to moving cars. Mobile laser scanning (MLS) system is an effective way to obtain the 3D information of the road surface, including road markings, at highway speeds and at less than traditional survey costs. This paper presents a novel method to automatically extract road markings from MLS point clouds. Ground points are first filtered from raw input point clouds using neighborhood elevation consistency method. The basic assumption of the method is that the road surface is smooth. Points with small elevation-difference between neighborhood are considered to be ground points. Then ground points are partitioned into a set of profiles according to trajectory data. The intensity histogram of points in each profile is generated to find intensity jumps in certain threshold which inversely to laser distance. The separated points are used as seed points to region grow based on intensity so as to obtain road mark of integrity. We use the point cloud template-matching method to refine the road marking candidates via removing the noise clusters with low correlation coefficient. During experiment with a MLS point set of about 2 kilometres in a city center, our method provides a promising solution to the road markings extraction from MLS data.

  18. Mark retention of calcein in Cisco and Bloater

    Science.gov (United States)

    Chalupnicki, Marc A.; Mackey, Gregg; Nash, Kendra; Chiavelli, Richard; Johnson, James H.; Kehler, Thomas; Ringler, Neil H.

    2016-01-01

    Since 2012, a multi-agency initiative to restore these native forage species has been under way. Evaluating the restoration success of Cisco Coregonus artedi and Bloater C. hoyi in Lake Ontario waters requires methods to identify stocked fish. However, juvenile Cisco and Bloater are fragile; thus, mass marking techniques that reduce the handling of individual fish are required and have not previously been evaluated. In 2014–2015 we evaluated the usefulness of calcein (SE-MARK) as a marker on bony structures, including the otolith. Juvenile Bloater and Cisco (14, 100, 128 d old) were immersed in a calcein bath at 5,000 mg/L of water for 4 min to apply the chemical marker. Observations of the marking retention were evaluated 8 d following the treatment. All fish immersed in calcein had strong brilliant marks (rating scale 3) on all bony structures including scales, fin rays, jaw bones, and vertebrate. The otolith was the only hard structure that did not show a brilliant marking due to the opaque nature of the structure. Our results suggest that calcein produces a strong discernable mark on hard bony structures of Cisco and Bloater; however, long-term retention needs further study.

  19. Equity Development Programmes: Does Mentoring Make a Difference in Individual and Social Transformation for South African WonderWomen?

    Science.gov (United States)

    Geber, Hilary

    2010-01-01

    The equity and transformation challenge for women and black academics at universities in Post-Apartheid South Africa is enormous. Despite a marked increase in equity development programmes since the 1996 Employment Equity legislation, fewer women than expected have advanced through the academic ranks. An indigenous mentoring model for…

  20. School-based programmes for preventing smoking.

    Science.gov (United States)

    Thomas, R; Perera, R

    2006-07-19

    abstracted outcome data. Because of the marked heterogeneity of design and outcomes, we computed pooled estimates only for those trials that could be analyzed together and for which statistical data were available. We predominantly synthesized the data using narrative systematic review. We grouped studies by intervention method (information; social competence; social influences; combined social influences/social competence; multi-modal programmes). Within each group, we placed them into three categories (low, medium and high risk of bias) according to validity using quality criteria for reported study design. Of the 94 randomized controlled trials identified, we classified 23 as category one (most valid). There was one category one study of information-giving and two of teaching social comeptence. There were thirteen category one studies of social influences interventions. Of these, nine found some positive effect of intervention on smoking prevalence, and four failed to detect an effect on smoking prevalence. The largest and most rigorous study, the Hutchinson Smoking Prevention Project, found no long-term effect of an intensive eight-year programme on smoking behaviour. There were three category one RCTs of combined social influences and social competence interventions: one provided significant results and one only for instruction by health educators compared to self-instruction. There was a lack of high quality evidence about the effectiveness of combinations of social influences and social competence approaches. There was one category one study providing data on social influences compared with information giving. There were four category one studies of multi-modal approaches but they provided limited evidence about the effectiveness of multi-modal approaches including community initiatives. There is one rigorous test of the effects of information-giving about smoking. There are well-conducted randomized controlled trials to test the effects of social influences

  1. Swiss Biomass Programme - Overview report on the 2007 research programme; Programm Biomasse: Ueberblicksbericht zum Forschungsprogramm 2007

    Energy Technology Data Exchange (ETDEWEB)

    Binggeli, D; Guggisberg, B

    2008-07-01

    This illustrated report for the Swiss Federal Office of Energy (SFOE) presents an overview of the results obtained in 2007 within the framework of the Swiss Biomass research programme. The potential for biomass use in Switzerland is reviewed and the emphases of the national programme are discussed. The results obtained are noted for the following areas: process optimisation, including - amongst others - particle emissions and control aspects as well as combined wood-pellets and solar heating systems. Projects involving non-wood biomass are reported on, including biomass digesters and various biogas systems. Further reports deal with the analysis and optimisation of material flows, organic pollutants and methane losses. New conversion technologies are reported on. Further reports deal with basic strategies and concepts in the area of biomass usage. National and international co-operation is also discussed. A selection of innovative pilot and demonstration projects is also presented and research and development projects are listed.

  2. Enlargement of the External Mobility Programme

    CERN Multimedia

    HR Department

    2008-01-01

    The External Mobility Programme was launched at the end of September 2007. Initially, the programme was aimed at staff members on limited-duration contracts, having received formal notification of the termination of their employment contract at CERN, to help them towards their next employment. The programme provides a privileged, fast-track entry into the recruitment process of partner companies. Despite the short time since its inception, the programme has already delivered some encouraging and concrete results in terms of interviews granted to participating staff. The Programme has raised considerable interest from both CERN personnel as well as from several major European companies. CERN Management has decided to broaden the scope of the External Mobility Programme. The Programme is now open to: All staff members whose limited duration contract will end in less than one year, as well as all those with indefinite contracts. All fellows who have been employed by CERN fo...

  3. Enlargement of the External Mobility Programme

    CERN Multimedia

    HR Department

    2008-01-01

    The External Mobility Programme was launched at the end of September 2007. Initially, the programme was aimed at staff members on limited-duration contracts having received formal notification of the termination of their employment contract at CERN, to help them towards their next employment. The programme provides a privileged, fast-track entry into the recruitment process of partner companies. Despite the short time since its inception, the programme has already delivered some encouraging and concrete results in terms of interviews granted to participating staff. The Programme has attracted considerable interest from both CERN personnel as well as from several major European companies. The CERN Management has decided to broaden the scope of the External Mobility Programme. The Programme is now open to: All staff members whose limited duration contract will end in less than one year, as well as all those with indefinite contracts. All fellows who have been employed by CE...

  4. The E.C.C. programme in the field of radioactive wastes

    International Nuclear Information System (INIS)

    Orlowski, S.

    1976-01-01

    After a description of the aims of the E.C.C. in the field of radioactive wastes, the contents and the structure of the programme developed for this purpose as well as its time schedule and financing, are presented. The state of work progress and the first results of the actions taken, whose application is marked by an active cooperation of numerous national experts are quoted [fr

  5. Reproducibility of Computer-Aided Detection Marks in Digital Mammography

    International Nuclear Information System (INIS)

    Kim, Seung Ja; Moon, Woo Kyung; Cho, Nariya; Kim, Sun Mi; Im, Jung Gi; Cha, Joo Hee

    2007-01-01

    To evaluate the performance and reproducibility of a computeraided detection (CAD) system in mediolateral oblique (MLO) digital mammograms taken serially, without release of breast compression. A CAD system was applied preoperatively to the fulfilled digital mammograms of two MLO views taken without release of breast compression in 82 patients (age range: 33 83 years; mean age: 49 years) with previously diagnosed breast cancers. The total number of visible lesion components in 82 patients was 101: 66 masses and 35 microcalcifications. We analyzed the sensitivity and reproducibility of the CAD marks. The sensitivity of the CAD system for first MLO views was 71% (47/66) for masses and 80% (28/35) for microcalcifications. The sensitivity of the CAD system for second MLO views was 68% (45/66) for masses and 17% (6/35) for microcalcifications. In 84 ipsilateral serial MLO image sets (two patients had bilateral cancers), identical images, regardless of the existence of CAD marks, were obtained for 35% (29/84) and identical images with CAD marks were obtained for 29% (23/78). Identical images, regardless of the existence of CAD marks, for contralateral MLO images were 65% (52/80) and identical images with CAD marks were obtained for 28% (11/39). The reproducibility of CAD marks for the true positive masses in serial MLO views was 84% (42/50) and that for the true positive microcalcifications was 0% (0/34). The CAD system in digital mammograms showed a high sensitivity for detecting masses and microcalcifications. However, reproducibility of microcalcification marks was very low in MLO views taken serially without release of breast compression. Minute positional change and patient movement can alter the images and result in a significant effect on the algorithm utilized by the CAD for detecting microcalcifications

  6. Scent marking behavior as an odorant communication in mice

    Science.gov (United States)

    Arakawa, Hiroyuki; Blanchard, D. Caroline; Arakawa, Keiko; Dunlap, Christopher; Blanchard, Robert J.

    2008-01-01

    In rodents, where chemical signals play a particularly important role in determining intraspecies interactions including social dominance and intersexual relationships, various studies have shown that behavior is sensitive to conspecific odor cues. Mice use urinary scent marks for communication with individual conspecifics in many social contexts. Urinary scent involves genetic information about individuals such as species, sex, and individual identity as well as metabolic information such as social dominance, and reproductive and health status, which are mediated by chemical proteins in scent marks including the major histocompatibility complex and the major urinary proteins. The odor of the predator which can be considered to be a threatening signal for the prey also modulate mouse behavior in which scent marking is suppressed in response to the cat odor exposure in mice. These odorant chemicals are detected and recognized through two olfactory bulbs, the role of which in detection of chemosignals with biological relevant appears to be differential, but partly overlapped. Mice deposit scent marks toward conspecifics to maintain their social relationships, and inhibit scent marking in a context where natural predator, cat odor is contained. This suppression of scent marking is long-lasting (for at least 7 days) and context-dependent, while the odorant signaling to conspecifics tends to appear frequently (over 24 hrs but less than 7 days intervals) depending on the familiarity of each signal-recipient. It has been discussed that scent marking is a communicative behavior associated with territoriality toward conspecifics, indicating that the social signaling within species are sensitive to predator odor cues in terms of vulnerability to predation risk. PMID:18565582

  7. Waste Disposal: The PRACLAY Programme

    Energy Technology Data Exchange (ETDEWEB)

    De Bruyn, D

    2000-07-01

    Principal achievements in 2000 with regard to the PRACLAY programme are presented. The PRACLAY project has been conceived: (1) to demonstrate the construction and the operation of a gallery for the disposal of HLW in a clay formation; (2) to improve knowledge on deep excavations in clay through modelling and monitoring; (3) to design, install and operate a complementary mock-up test (OPHELIE) on the surface. In 1999, efforts were focussed on the operation of the OPHELIE mock-up and the CLIPEX project to monitor the evolution of hydro-mechanical parameters of the Boom Clay Formation near the face of a gallery during excavation.

  8. Programmable automated transistor test system

    International Nuclear Information System (INIS)

    Truong, L.V.; Sundberg, G.R.

    1986-01-01

    The paper describes a programmable automated transistor test system (PATTS) and its utilization to evaluate bipolar transistors and Darlingtons, and such MOSFET and special types as can be accommodated with the PATTS base-drive. An application of a pulsed power technique at low duty cycles in a non-destructive test is used to examine the dynamic switching characteristic curves of power transistors. Data collection, manipulation, storage, and output are operator interactive but are guided and controlled by the system software. In addition a library of test data is established on disks, tapes, and hard copies for future reference

  9. Computer programmes for nuclear physics

    International Nuclear Information System (INIS)

    Wilmore, D.

    1981-02-01

    Two programmes for use in the calculation of problems involving the scattering of neutrons, protons or heavier composite particles from nuclei are described. The first, an optical model for the calculation of the elastic, total and absorption cross-sections from an optical potential, includes facilities for automatically finding the appropriate optical potential to describe any given set of experimental data. The second a statistical model for the calculation of inelastic and other compound nucleus scattering processes, according to three different theories, includes level width fluctuation calculations. (U.K.)

  10. Academic Training Lecture - Regular Programme

    CERN Multimedia

    PH Department

    2011-01-01

    Regular Lecture Programme 9 May 2011 ACT Lectures on Detectors - Inner Tracking Detectors by Pippa Wells (CERN) 10 May 2011 ACT Lectures on Detectors - Calorimeters (2/5) by Philippe Bloch (CERN) 11 May 2011 ACT Lectures on Detectors - Muon systems (3/5) by Kerstin Hoepfner (RWTH Aachen) 12 May 2011 ACT Lectures on Detectors - Particle Identification and Forward Detectors by Peter Krizan (University of Ljubljana and J. Stefan Institute, Ljubljana, Slovenia) 13 May 2011 ACT Lectures on Detectors - Trigger and Data Acquisition (5/5) by Dr. Brian Petersen (CERN) from 11:00 to 12:00 at CERN ( Bldg. 222-R-001 - Filtration Plant )

  11. Waste Disposal: The PRACLAY Programme

    International Nuclear Information System (INIS)

    De Bruyn, D.

    2000-01-01

    Principal achievements in 2000 with regard to the PRACLAY programme are presented. The PRACLAY project has been conceived: (1) to demonstrate the construction and the operation of a gallery for the disposal of HLW in a clay formation; (2) to improve knowledge on deep excavations in clay through modelling and monitoring; (3) to design, install and operate a complementary mock-up test (OPHELIE) on the surface. In 1999, efforts were focussed on the operation of the OPHELIE mock-up and the CLIPEX project to monitor the evolution of hydro-mechanical parameters of the Boom Clay Formation near the face of a gallery during excavation

  12. Programmable Automated Welding System (PAWS)

    Science.gov (United States)

    Kline, Martin D.

    1994-01-01

    An ambitious project to develop an advanced, automated welding system is being funded as part of the Navy Joining Center with Babcock & Wilcox as the prime integrator. This program, the Programmable Automated Welding System (PAWS), involves the integration of both planning and real-time control activities. Planning functions include the development of a graphical decision support system within a standard, portable environment. Real-time control functions include the development of a modular, intelligent, real-time control system and the integration of a number of welding process sensors. This paper presents each of these components of the PAWS and discusses how they can be utilized to automate the welding operation.

  13. Programmable, automated transistor test system

    Science.gov (United States)

    Truong, L. V.; Sundburg, G. R.

    1986-01-01

    A programmable, automated transistor test system was built to supply experimental data on new and advanced power semiconductors. The data will be used for analytical models and by engineers in designing space and aircraft electric power systems. A pulsed power technique was used at low duty cycles in a nondestructive test to examine the dynamic switching characteristic curves of power transistors in the 500 to 1000 V, 10 to 100 A range. Data collection, manipulation, storage, and output are operator interactive but are guided and controlled by the system software.

  14. A method for studying knife tool marks on bone.

    Science.gov (United States)

    Shaw, Kai-Ping; Chung, Ju-Hui; Chung, Fang-Chun; Tseng, Bo-Yuan; Pan, Chih-Hsin; Yang, Kai-Ting; Yang, Chun-Pang

    2011-07-01

    The characteristics of knife tool marks retained on hard tissues can be used to outline the shape and angle of a knife. The purpose of this study was to describe such marks on bone tissues that had been chopped with knives. A chopping stage with a gravity accelerator and a fixed bone platform was designed to reconstruct the chopping action. A digital microscope was also used to measure the knife angle (θ) and retained V-shape tool mark angle (ψ) in a pig skull. The κ value (elasticity coefficient; θ/ψ) was derived and recorded after the knife angle (θ) and the accompanied velocity were compared with the proportional impulsive force of the knife and ψ on the bone. The constant impulsive force revealed a correlation between the V-shape tool mark angle (ψ) and the elasticity coefficient (κ). These results describe the tool marks--crucial in the medicolegal investigation--of a knife on hard tissues. © 2011 American Academy of Forensic Sciences.

  15. Recognition in context: Implications for trade mark law.

    Science.gov (United States)

    Humphreys, Michael S; McFarlane, Kimberley A; Burt, Jennifer S; Kelly, Sarah J; Weatherall, Kimberlee G; Burrell, Robert G

    2017-10-01

    Context effects in recognition have played a major role in evaluating theories of recognition. Understanding how context impacts recognition is also important for making sound trade mark law. Consumers attempting to discriminate between the brand they are looking for and a look-alike product often have to differentiate products which share a great deal of common context: positioning on the supermarket shelf, the type of store, aspects of the packaging, or brand claims. Trade mark and related laws aim to protect brands and reduce consumer confusion, but courts assessing allegations of trade mark infringement often lack careful empirical evidence concerning the impact of brand and context similarity, and, in the absence of such evidence, make assumptions about how consumers respond to brands that downplay the importance of context and focus on the similarity of registered marks. The experiments reported in this paper aimed to test certain common assumptions in trade mark law, providing evidence that shared context can cause mistakes even where brand similarity is low.

  16. A "Marked Success": Physical Activity at Miss White's School

    Science.gov (United States)

    Morice, Linda C.

    2008-01-01

    This article examines the career of Flora White, who operated a school for girls in Concord, Massachusetts (USA) from 1897 to 1914. The school promoted individualised learning and physical activity for young women. Its programme of female exercise and sports ran counter to prevailing scholarly, medical, and popular opinion in the US. White faced…

  17. Male and female meadow voles Microtus pennsylvanicus respond differently to scent marks from the top- middle-, and bottom-scent donors of an over-mark

    Directory of Open Access Journals (Sweden)

    Michael H. FERKIN, Nicholas J. HOBBS, Benjamin D. FERKIN, Adam C.FERKIN, Daniel A. FERKIN

    2011-08-01

    Full Text Available Previous studies have shown that individuals responded preferentially to the mark of the top-scent donor relative to that of the bottom-scent donor of an over-mark. However, terrestrial mammals are likely to encounter over-marks consisting of the scent marks of more than two same-sex conspecifics in the intersections of runways, near the nests of sexually receptive female conspecifics, and inside and along the borders of the territories of conspecifics. We determined how meadow voles, Microtus pennsylvanicus, respond to the marks of the top-, middle-, and bottom-scent donors of an over-mark. We tested the hypothesis that voles exposed to an over-mark will respond preferentially to the scent marks that were deposited more recently, the scent marks that were on top or near the top of the over-mark, compared to the scent marks that were deposited earlier or near the bottom of the over-mark. Voles spent more time investigating the mark of the top-scent donor than that of the either the middle- or bottom-scent donor. However, males but not female voles spent more time investigating the middle-scent mark than the bottom-scent mark. We also tested the hypothesis that voles evaluate and respond to over-marks differently from single scent marks. Voles spent more time investigating the marks of the top-, middle-, and bottom-scent donors compared to scent marks that were not part of the over-mark. Voles can distinguish among the overlapping scent marks of three scent donors and sex differences exist in the values they appear to attach to each of these scent marks [Current Zoology 57 (4: 441–448, 2011].

  18. XML schemas and mark-up practices of taxonomic literature.

    Science.gov (United States)

    Penev, Lyubomir; Lyal, Christopher Hc; Weitzman, Anna; Morse, David R; King, David; Sautter, Guido; Georgiev, Teodor; Morris, Robert A; Catapano, Terry; Agosti, Donat

    2011-01-01

    We review the three most widely used XML schemas used to mark-up taxonomic texts, TaxonX, TaxPub and taXMLit. These are described from the viewpoint of their development history, current status, implementation, and use cases. The concept of "taxon treatment" from the viewpoint of taxonomy mark-up into XML is discussed. TaxonX and taXMLit are primarily designed for legacy literature, the former being more lightweight and with a focus on recovery of taxon treatments, the latter providing a much more detailed set of tags to facilitate data extraction and analysis. TaxPub is an extension of the National Library of Medicine Document Type Definition (NLM DTD) for taxonomy focussed on layout and recovery and, as such, is best suited for mark-up of new publications and their archiving in PubMedCentral. All three schemas have their advantages and shortcomings and can be used for different purposes.

  19. Evaluation of TRIGA Mark II reactor in Turkey

    International Nuclear Information System (INIS)

    Bilge, Ali Nezihi

    1990-01-01

    There are two research reactors in Turkey and one of them is the university Triga Mark II reactor which was in service since 1979 both for education and industrial application purposes. The main aim of this paper is to evaluate the spectrum of the services carried by Turkish Triga Mark II reactor. In this work, statistical distribution of the graduate works and applications, by using Triga Mark II reactor is examined and evaluated. In addition to this, technical and scientific uses of this above mentioned reactor are also investigated. It was already showed that the uses and benefits of this reactor can not be limited. If the sufficient work and service is given, NDT and industrial applications can also be carried economically. (orig.)

  20. Full-scale mark II CRT program data report, (5)

    International Nuclear Information System (INIS)

    Kukita, Yutaka; Namatame, Ken; Yamamoto, Nobuo; Takeshita, Isao; Shiba, Masayoshi

    1980-03-01

    The Full-Scale Mark II CRT (Containment Response Test) Program was initiated in 1977 to provide a data base for evaluation of the LOCA hydrodynamic loads for the Mark II pressure suppression system. The test facility is 1/18 in volume and has a wetwell which is a fullscale replica of one 20 0 -sector of that of a reference Mark II. This report documents test data obtained from TEST 2101, which is a medium size (74 mm) water break test performed on April 27, 1979. TEST 2101 was designed to roughly approximate an intermediate break accident in which so-called chugging phenomenon associated with low-flux steam condensation is anticipated to continue for a longer duration than in a large break accident. (author)

  1. Full-scale mark II CRT program facility description report

    International Nuclear Information System (INIS)

    Namatame, Ken; Kukita, Yutaka; Ito, Hideo; Yamamoto, Nobuo; Shiba, Masayoshi

    1980-03-01

    Started in fiscal year 1977, the Full-Scale Mark II CRT (Containment Response Test) Program is proceeding for the period of five years. The primary objective of the CRT Program is to provide a data base for evaluation of the pressure suppression pool hydrodynamic loads associated with a postulated loss-of-coolant accident in the BWR Mark II containment system. The test facility was designed and constructed from fiscal year 1977 to 1978, and completed in March 1979. It is 1/18 in volume and has a wetwell which is a full-scale replica of one 20 0 -sector of that of a reference Mark II. This report describes design concepts, dimensions and constructions of the test facility, as well as specifications, locations and installation schemes of the measuring equipments. Results of soil structure inspection, vacuum breaker test and shaker test of the containment shell are given in the appendices. (author)

  2. RAPID INSPECTION OF PAVEMENT MARKINGS USING MOBILE LIDAR POINT CLOUDS

    Directory of Open Access Journals (Sweden)

    H. Zhang

    2016-06-01

    Full Text Available This study aims at building a robust semi-automated pavement marking extraction workflow based on the use of mobile LiDAR point clouds. The proposed workflow consists of three components: preprocessing, extraction, and classification. In preprocessing, the mobile LiDAR point clouds are converted into the radiometrically corrected intensity imagery of the road surface. Then the pavement markings are automatically extracted with the intensity using a set of algorithms, including Otsu’s thresholding, neighbor-counting filtering, and region growing. Finally, the extracted pavement markings are classified with the geometric parameters using a manually defined decision tree. Case studies are conducted using the mobile LiDAR dataset acquired in Xiamen (Fujian, China with different road environments by the RIEGL VMX-450 system. The results demonstrated that the proposed workflow and our software tool can achieve 93% in completeness, 95% in correctness, and 94% in F-score when using Xiamen dataset.

  3. Combined pump and marking tests for determining protection zones

    Energy Technology Data Exchange (ETDEWEB)

    Hoetzl, H.; Brauns, J.

    1982-02-01

    Under difficult conditions the determination of the protection area II on the basis of Mear pump tests becomes uncertain. The report shows how in such cases the results of supplementary marking tests can establish a more accurate finding. The execution of combined pump and marking tests enables us to check data gained on a theoretical basis and possibly alter these. This method is described in an example, in which certain hydrogeological conditions and rival interests of ground water protection prevail on the one side and utilization of land on the other side. A general tendency exists to take the utmost protective measure in safeguarding ground water, however in cases of collision of interests the boundary of the protective area should be optimized. Supplementary marking tests can be of great significance.

  4. Mark I containment, short term program. Safety evaluation report

    International Nuclear Information System (INIS)

    1977-12-01

    Presented is a Safety Evaluation Report (SER) prepared by the Office of Nuclear Reactor Regulation addressing the Short Term Program (STP) reassessment of the containment systems of operating Boiler Water Reactor (BWR) facilities with the Mark I containment system design. The information presented in this SER establishes the basis for the NRC staff's conclusion that licensed Mark I BWR facilities can continue to operate safely, without undue risk to the health and safety of the public, during an interim period of approximately two years while a methodical, comprehensive Long Term Program (LTP) is conducted. This SER also provides one of the basic foundations for the NRC staff review of the Mark I containment systems for facilities not yet licensed for operation

  5. 2001 - 2002 ACADEMIC TRAINING PROGRAMME

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    1ST TERM 1ST OCTOBER - 23 NOVEMBER 2001 LECTURE SERIES FOR POSTGRADUATE STUDENTS The Autumn term of the Academic Training Programme is about to start. As usual, the first term includes lectures primarily dedicated to Post-graduate students. These are meant to help students complement the courses available from their home Universities with lectures on topics close to CERN activities. The lectures are nevertheless open to all CERN staff, and in particular to young Fellows. This year's series include courses on Accelerator Physics, on Field Theory, and on Symmetry Breaking Phenomena in Physics. The course on Accelerators by Dr. Wilson has been a regular feature on the Academic Training programme for many previous editions. This year, the course will be updated to include new sections on Colliders and on future facilities such as the Neutrino Factory. A good introduction to this very successful course can be found in the previous version of these lectures, available from the Web Lecture Archive Project: http://w...

  6. Apprendre à programmer avec Python

    CERN Document Server

    Swinnen, Gérard

    2009-01-01

    Quel meilleur choix pour apprendre la programmation qu'un langage moderne et élégant tel que Python, aussi bon pour le développement d'applications web que pour la réalisation de scripts système ou l'analyse de fichiers textuels ? Un support de cours réputé et adopté par de nombreux enseignants, avec 40 pages d'exercices corrigés Reconnu et utilisé par les enseignants de nombreuses écoles et IUT, complété d'exercices accompagnés de leurs corrigés, cet ouvrage original et érudit est une référence sur tous les fondamentaux de la programmation : choix d'une structure de données, paramétrage, modularité, orientation objet et héritage, conception d'interface, multithreading et gestion d'événements, protocoles de communication et gestion réseau, formulaires web et (GI, bases de données) jusqu'à la désormais indispensable norme Unicode (le format UTF-8).

  7. Quality control programme for radiotherapy

    International Nuclear Information System (INIS)

    Campos de Araujo, A.M.; Viegas, C.C.B.; Viamonte, A.M.

    2002-01-01

    A 3 years pilot programme started in January 2000 with 33 philanthropic cancer institutions that provides medical services to 60% of the patients from the national social security system. Brazil has today 161 radiotherapy services (144 operating with megavoltage equipment). These 33 institutions are distributed over 19 Brazilian states. The aim of this programme is: To create conditions to allow the participants to apply the radiotherapy with quality and efficacy; To promote up dating courses for the physicians, physicists and technicians of these 33 Institutions. With the following objectives: To recommend dosimetric and radiological protection procedures in order to guarantee the tumor prescribed dose and safe working conditions; To help in establishing and implementing these procedures. The main activities are: local quality control evaluations, postal TLD audits in reference conditions, postal TLD audits in off axis conditions and training. The local quality control program has already evaluated 22 institutions with 43 machines (25 Co-60 and 18 linear accelerators). In these visits we perform dosimetric, electrical, mechanical and safety tests. As foreseen, we found more problems among the old Co-60 machines i.e., field flatness, size, symmetry and relative output factors; lasers positioning system alignment; optical distance indicator; radiation and light field coincidence; optical and mechanical distance indicators agreement, than among the linear accelerators i.e., field flatness and size; lasers positioning system alignment; tray interlocking and wedge filter factors

  8. New genetic tools for improving SIT in Ceratitis capitata: embryonic lethality and sperm marking

    International Nuclear Information System (INIS)

    Schetelig, Marc F.; Wimmer, Ernst A.; Scolari, Francesca; Gasperi, Giuliano; Handler, Ernst A.

    2006-01-01

    Environment friendly sterile insect technique (SIT) is being applied effectively as a component of area-wide integrated pest management (AW-IPM) for Ceratitis capitata since 1970s. Nevertheless improved biological strategies are needed to increase the efficacy of AW-IPM. Transgenic approaches should increase and widen the applicability of such programmes to different pest species. In this respect two major strategies are followed: First an approach to cause sterility was designed without interfering with spermatogenesis to maintain males and their sperm as competitive as possible. We followed a strategy, which is based on the expression of a lethal factor under the control of a promoter that is active at early blastoderm stages. The system employs the ectopic expression of a hyperactive pro apoptotic gene that causes embryo-specific lethality when driven by the tetracycline-controlled trans activator tTA under the regulation of a cellularization gene enhancer/promoter. The system has been tested successfully in Drosophila melanogaster (Horn and Wimmer 2003). We tried the direct transfer of the Drosophila system to Ceratitis capitata by injecting the respective constructs that carry Drosophila-derived promoters. Unfortunately, the cellularization specific promoters from Drosophila seem not functional in Ceratitis. Therefore, the corresponding enhancers/promoters from Ceratitis were isolated and subsequently the tTA was brought independently under the control of each enhancer/promoter region. These constructs were injected in Ceratitis for further evaluation. Second, we have engineered a medfly strain carrying a sperm marking system. This strain carries two fluorescent markers. One (turboGFP) marker is under the control of the spermatogenesis specific b2-tubulin promoter from Ceratitis and is therefore sperm specifically expressed. The second (DsRed) is under the control of the poly ubiquitin promoter of Drosophila. Released males from this strain could be

  9. New genetic tools for improving SIT in Ceratitis capitata: embryonic lethality and sperm marking

    Energy Technology Data Exchange (ETDEWEB)

    Schetelig, Marc F; Wimmer, Ernst A [Georg-August-University, Gottingen (Germany). Johann-Friedrich Blumenbach Institute of Zoology and Anthropology. Gottingen Center for Molecular Biosciences; Scolari, Francesca; Gasperi, Giuliano [Universita di Pavia (Italy). Dipt. di Biologia Animale; Handler, Ernst A [U.S. Department of Agriculture (USDA/ARS), Gainesville, FL (United States). Agricultural Research Service. Center for Medical, Agricultural and Veterinary Entomology

    2006-07-01

    Environment friendly sterile insect technique (SIT) is being applied effectively as a component of area-wide integrated pest management (AW-IPM) for Ceratitis capitata since 1970s. Nevertheless improved biological strategies are needed to increase the efficacy of AW-IPM. Transgenic approaches should increase and widen the applicability of such programmes to different pest species. In this respect two major strategies are followed: First an approach to cause sterility was designed without interfering with spermatogenesis to maintain males and their sperm as competitive as possible. We followed a strategy, which is based on the expression of a lethal factor under the control of a promoter that is active at early blastoderm stages. The system employs the ectopic expression of a hyperactive pro apoptotic gene that causes embryo-specific lethality when driven by the tetracycline-controlled trans activator tTA under the regulation of a cellularization gene enhancer/promoter. The system has been tested successfully in Drosophila melanogaster (Horn and Wimmer 2003). We tried the direct transfer of the Drosophila system to Ceratitis capitata by injecting the respective constructs that carry Drosophila-derived promoters. Unfortunately, the cellularization specific promoters from Drosophila seem not functional in Ceratitis. Therefore, the corresponding enhancers/promoters from Ceratitis were isolated and subsequently the tTA was brought independently under the control of each enhancer/promoter region. These constructs were injected in Ceratitis for further evaluation. Second, we have engineered a medfly strain carrying a sperm marking system. This strain carries two fluorescent markers. One (turboGFP) marker is under the control of the spermatogenesis specific b2-tubulin promoter from Ceratitis and is therefore sperm specifically expressed. The second (DsRed) is under the control of the poly ubiquitin promoter of Drosophila. Released males from this strain could be

  10. Laser marking as a result of applying reverse engineering

    Science.gov (United States)

    Mihalache, Andrei; Nagîţ, Gheorghe; Rîpanu, Marius Ionuţ; Slǎtineanu, Laurenţiu; Dodun, Oana; Coteaţǎ, Margareta

    2018-05-01

    The elaboration of a modern manufacturing technology needs a certain quantum of information concerning the part to be obtained. When it is necessary to elaborate the technology for an existing object, such an information could be ensured by using the principles specific to the reverse engineering. Essentially, in the case of this method, the analysis of the surfaces and of other characteristics of the part must offer enough information for the elaboration of the part manufacturing technology. On the other hand, it is known that the laser marking is a processing method able to ensure the transfer of various inscriptions or drawings on a part. Sometimes, the laser marking could be based on the analysis of an existing object, whose image could be used to generate the same object or an improved object. There are many groups of factors able to affect the results of applying the laser marking process. A theoretical analysis was proposed to show that the heights of triangles obtained by means of a CNC marking equipment depend on the width of the line generated by the laser spot on the workpiece surface. An experimental research was thought and materialized to highlight the influence exerted by the line with and the angle of lines intersections on the accuracy of the marking process. By mathematical processing of the experimental results, empirical mathematical models were determined. The power type model and the graphical representation elaborated on the base of this model offered an image concerning the influences exerted by the considered input factors on the marking process accuracy.

  11. UID...Leaving Its Mark on the Universe

    Science.gov (United States)

    Schramm, Harry F., Jr.

    2008-01-01

    Since 1975 bar codes on products at the retail counter have been accepted as the standard for entering product identity for price determination. Since the beginning of the 21 st century, the Data Matrix symbol has become accepted as the bar code format that is marked directly on a part, assembly or product that is durable enough to identify that item for its lifetime. NASA began the studies for direct part marking Data Matrix symbols on parts during the Return to Flight activities after the Challenger Accident. Over the 20 year period that has elapsed since Challenger, a mountain of studies, analyses and focused problem solutions developed by and for NASA have brought about world changing results. NASA Technical Standard 6002 and NASA Handbook 6003 for Direct Part Marking Data Matrix Symbols on Aerospace Parts have formed the basis for most other standards on part marking internationally. NASA and its commercial partners have developed numerous products and methods that addressed the difficulties of collecting part identification in aerospace operations. These products enabled the marking of Data Matrix symbols in virtually every situation and the reading of symbols at great distances, severe angles, under paint and in the dark without a light. Even unmarkable delicate parts now have a process to apply a chemical mixture, recently trademarked as Nanocodes, that can be converted to Data Matrix information through software. The accompanying intellectual property is protected by ten patents, several of which are licensed. Direct marking Data Matrix on NASA parts dramatically decreases data entry errors and the number of parts that go through their life cycle unmarked, two major threats to sound configuration management and flight safety. NASA is said to only have people and stuff with information connecting them. Data Matrix is one of the most significant improvements since Challenger to the safety and reliability of that connection.

  12. UID....Now That's Gonna Leave A Mark

    Science.gov (United States)

    Schramm, Harry F., Jr.

    2008-01-01

    Since 1975 bar codes on products at the retail counter have been accepted as the standard for entering product identity for price determination. Since the beginning of the 21 st century, the Data Matrix symbol has become accepted as the bar code format that is marked directly on a part, assembly or product that is durable enough to identify that item for its lifetime. NASA began the studies for direct part marking Data Matrix symbols on parts during the Return to Flight activities after the Challenger Accident. Over the 20 year period that has elapsed since Challenger, a mountain of studies, analyses and focused problem solutions developed by and for NASA have brought about world changing results. NASA Technical Standard 6002 and NASA Handbook 6003 for Direct Part Marking Data Matrix Symbols on Aerospace Parts have formed the basis for most other standards on part marking internationally. NASA and its commercial partners have developed numerous products and methods that addressed the difficulties of collecting part identification in aerospace operations. These products enabled the marking of Data Matrix symbols in virtually every situation and the reading of symbols at great distances, severe angles, under paint and in the dark without a light. Even unmarkable delicate parts now have a process to apply a chemical mixture, recently trademarked as Nanocodes, that can be converted to Data Matrix information through software. The accompanying intellectual property is protected by ten patents, several of which are licensed. Direct marking Data Matrix on NASA parts dramatically decreases data entry errors and the number of parts that go through their life cycle unmarked, two major threats to sound configuration management and flight safety. NASA is said to only have people and stuff with information connecting them. Data Matrix is one of the most significant improvements since Challenger to the safety and reliability of that connection.

  13. GMES Space Component: Programme overview

    Science.gov (United States)

    Aschbacher, J.; Milagro-Perez, M. P.

    2012-04-01

    The European Union (EU) and the European Space Agency (ESA) have developed the Global Monitoring for Environment and Security (GMES) programme as Europe's answer to the vital need for joined-up data about our climate, environment and security. Through a unique combination of satellite, atmospheric and Earth-based monitoring systems, the initiative will provide new insight into the state of the land, sea and air, providing policymakers, scientists, businesses and the public with accurate and timely information. GMES capabilities include monitoring and forecasting of climatic change, flood risks, soil and coastal erosion, crop and fish resources, air pollution, greenhouse gases, iceberg distribution and snow cover, among others. To accomplish this, GMES has been divided into three main components: Space, In-situ and Services. The Space Component, led by ESA, comprises five types of new satellites called Sentinels that are being developed by ESA specifically to meet the needs of GMES, the first of which to be launched in 2013. These missions carry a range of technologies, such as radar and multi-spectral imaging instruments for land, ocean and atmospheric monitoring. In addition, access to data from the so-called Contributing Missions guarantees that European space infrastructure is fully used for GMES. An integrated Ground Segment ensures access to Sentinels and Contributing Missions data. The in-situ component, under the coordination of the European Environment Agency (EEA), is composed of atmospheric and Earth based monitoring systems, and based on established networks and programmes at European and international levels. The European Commission is in charge of implementing the services component of GMES and of leading GMES overall. GMES services, fed with data from the Space and In-situ components, will provide essential information in five main domains, atmosphere, ocean and land monitoring as well as emergency response and security. Climate change has been added

  14. EcoMark: Evaluating Models of Vehicular Environmental Impact

    DEFF Research Database (Denmark)

    Guo, Chenjuan; Ma, Mike; Yang, Bin

    2012-01-01

    The reduction of greenhouse gas (GHG) emissions from transporta- tion is essential for achieving politically agreed upon emissions re- duction targets that aim to combat global climate change. So-called eco-routing and eco-driving are able to substantially reduce GHG emissions caused by vehicular...... the vehicle travels in. We develop an evaluation framework, called EcoMark, for such environmental impact models. In addition, we survey all eleven state-of-the-art impact models known to us. To gain insight into the capabilities of the models and to understand the effectiveness of the EcoMark, we apply...

  15. Bench mark spectra for high-energy neutron dosimetry

    International Nuclear Information System (INIS)

    Dierckx, R.

    1986-01-01

    To monitor radiation damage experiments, activation detectors are commonly used. The precision of the results obtained by the multiple foil analysis is largely increased by the intercalibration in bench-mark spectra. This technique is already used in dosimetry measurements for fission reactors. To produce neutron spectra similar to fusion reactor and high-energy high-intensity neutron sources (d-Li or spallation), accelerators can be used. Some possible solutions as p-Be and d-D 2 O neutron sources, useful as bench-mark spectra are described. (author)

  16. Mark-18A Ion Exchange Raffinate Management Strategy & Processing Recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Smith, T. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Nash, C. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-06-21

    It is desired to recover Cm-244 through Cm-248 from dissolved Mark-18A targets following anion exchange processing to remove the Pu. The Cm will be sent to Oak Ridge National Laboratory (ORNL) for additional R&D. Approximately 5-8 L per quarter of a Mark-18A target will have undergone anion exchange treatment and will contain Cm. A significant portion of this volume of anion exchange raffinate solution is dissolved fission products not desired to be recovered which could be sent to waste. To reduce the amount of material being sent to ORNL, a waste and volume minimization strategy was developed and is described in this report.

  17. Marks on the petroleum fiscality; Reperes sur la fiscalite petroliere

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-02-15

    This document offers some marks on the petroleum fiscality in France: the taxes as the 'accises' and the 'TVA', the part of the taxes in the sale price at the service station, the comparison with other countries of Europe, the tax revenues and the Government budget. It provides also marks on the fuels prices formation (margins), the world petroleum markets (supply and demand) and the part of the petroleum companies on the petroleum market. (A.L.B.)

  18. Glass marking with diode-pumped Nd:YLF laser; Handotai reiki Nd:YLF laser ni yoru glass marking

    Energy Technology Data Exchange (ETDEWEB)

    Sakai, F.; Hayashi, K. [Sumitomo Heavy Industries, Ltd., Tokyo (Japan)

    1996-08-20

    The compact marking system based on a beam scanning system in which the fourth harmonic (FHG: 262 nm in wavelength) of a diode-pumped Nd:YLF (Nd:LiYf4) laser is used for the source of ultraviolet light is described. The result of application to the glass marking that caused a problem due to the generation of cracks is also explained. The machining characteristics significantly vary depending on the type of glass. During actual marking, sample processing must be beforehand carried out to optimize the processing conditions after confirming that there is no problem in practical use. For marking on the glass used for liquid-crystal board, it is valid to improve the density of a dot and increase the number of shots per dot for obtaining high visibility. However, cracks may occur in the clearance of each dot because of the thermal effect. Therefore, the processing conditions must be optimized according to the glass type and crack generation state. The generation of cracks can be suppressed by setting the processing conditions to the optimum level. As a result, satisfactory marking is obtained. 8 refs., 6 figs.

  19. Note concerning the Ecasac programme; Note sur le programme ecasac

    Energy Technology Data Exchange (ETDEWEB)

    Bras, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The analytical programme developed by the firm I.B.M. for ECAP electronic circuits, operated initially on the IBM 1620 computer with a certain limitation on the size of the network studied, but already equipped from the conversational angle (type-writer). The IBM 360 computers made it possible to increase the size of the network treated to 50 nodes and 200 branches, but the conversational aspect was suppressed in the ECAP 360 version. With a view to making use of the possibilities of hybrid computers, we have adapted this latter version to the EAI 8400 computer. Without diminishing it in any way, we have modified it so as to provide it with conversational characteristics by using the computers control panel; to give it still further flexibility we have made it possible to record curves during the calculation operation, and to obtain a division of the printed results. To obtain the curves, use was made of analog digital converters of the interface of the hybrid unit EAI 8900 of which the EAI 8400 computer represents the numerical section. The modifications made concern in particular the A.C. analysis and the transient analysis. They facilitate and complete the input of the data; they allow modifications to be made for the calculation of these analyses; they also improve the presentation of the results and facilitate their interpretation. They constitute finally the version ECASAC, i.e. the programme ECAP 360 made conversational by use of a type-writer, with automatic output of the curves. (author) [French] Le programme d'analyse de circuits electroniques ECAP, mis au point par la firme I.B.M., a d'abord fonctionne sur ordinateur IBM 1620 avec une certaine limitation pour la taille du reseau etudie, mais deja une optique conversationnelle (machine a ecrire). Les ordinateurs IBM 360 ont permis d'accroitre la taille du reseau permis a 50 noeuds et 200 branches, mais par contre l'optique conversationnelle fut supprimee dans la version ECAP 360. Dans le but d

  20. Teaching in English-medium programmes

    DEFF Research Database (Denmark)

    Lauridsen, Karen M.; Cozart, Stacey Marie

    in such a way that they take into account their students’ diverse cultural and linguistic backgrounds and use them as a strength in the classroom; and they should be able to engage all students in joint learning activities so that both the Danish and the international students benefit from the programme......This contribution describes and discusses the module Teaching in English-medium programmes, an elective module offered as part of the teacher training programme for assistant professors (“adjunktpædagogikum”) at Aarhus University. In order to complete the whole programme, assistant professors must...... have at least one such elective module (http://upnet.au.dk/adjunktkursus/). Aarhus University offers the teacher training programme in Danish and in English for international faculty. Teaching in English-medium programmes is part of the Danish track, but taught through English. Building...

  1. Environmental Assessment of R&D Programmes

    DEFF Research Database (Denmark)

    Lyhne, Ivar; Byriel, Inger Pihl

    2013-01-01

    cause severe negative environmental impacts. This paper presents an innovative environmental assessment practice on R&D programmes in Denmark. It reports on the challenges and experiences of assessing the Danish R&D programme ForskEL, which promotes R&D projects within the electricity sector......Despite their important role in shaping the technologies of the future, public research and development (R&D) programmes are rarely based on systematic assessments of the environmental effects. R&D programmes thus allocate a huge amount of financial resources to projects, which potentially may....... The programme is characterised by uncertainty about impacts and incomparable project types and technologies. A methodology for dealing with these challenges is presented, and experiences from a testing of the methodology on the 2012 programme are reflected upon. Finally the assessment is discussed in terms...

  2. Research programme on radioactive wastes; Forschungsprogramm Radioaktive Abfaelle

    Energy Technology Data Exchange (ETDEWEB)

    Eckhardt, A. [Eidgenoessische Kommission fuer die Sicherheit der Kernanlagen (KSA), Brugg (Switzerland); Hufschmid, P. [Kommission Nukleare Entsorgung (KNE), Bern (Switzerland); Jordi, S. [Swiss Federal Office of Energy, Berne (Switzerland); Schanne, M. [Institut fuer Angewandte Medienwissenschaft (IAM), Zuercher Hochschule, Winterthur (Switzerland); Vigfusson, J. [Hauptabteilung fuer die Sicherheit der Kernanlagen (HSK), Brugg (Switzerland)

    2009-11-15

    This report for the Swiss Federal Department of the Environment, Transport, Energy and Communication (DETEC) takes a look at work done within the framework of the research programme on radioactive wastes. The paper discusses the development of various projects and the associated organisations involved. Both long-term and short-term topics are examined. The long-term aspects of handling radioactive wastes include organisation and financing as well as the preservation of know-how and concepts for marking the repositories. Communication with the general public on the matter is looked at along with public perception, opinion-making and acceptance. Waste storage concepts are looked at in detail and aspects such as environmental protection, monitoring concepts, retrievability and encasement materials are discussed. Finally, ethical and legal aspects of radioactive waste repositories are examined. The paper is completed with appendixes dealing with planning, co-ordination and the responsibilities involved

  3. Effectiveness of Training Programme on Mushroom Cultivation

    OpenAIRE

    Rahman, Md. Sazzadur; Hossain, Kh. Zulfikar; Ali, Md. Sekender; Afroz, Fauzia

    2017-01-01

    Effectiveness is one of the key parameters to assess success of any programs. However, the effectiveness of training programme on mushroom cultivation was not well addressed. The purposes of this study were to investigate the effectiveness of training programme on mushroom cultivation and to explore the relationships of each of the selected characteristics of the trained mushroom farmers with their effectiveness of training programme. Data were collected from the trained mushroom farmers of s...

  4. The state repatriation programme: four years later

    Directory of Open Access Journals (Sweden)

    Kirillova Yelena

    2010-12-01

    Full Text Available This article analyses the problems of the state voluntary repatriation programme and describes its key functions and implementation mechanisms. The author identifies the causes of deceleration in the repatriation process as well as the weak points of the Programme and the ways to improve it. The article offers data on the resettlement of compatriots over the three years of the Programme implementation, its demographic structure, and the regions of resettlement.

  5. Survey of radiation protection programmes for transport

    International Nuclear Information System (INIS)

    Lizot, M.T.; Perrin, M.L.; Sert, G.; Lange, F.; Schwarz, G.; Feet, H.J.; Christ, R.; Shaw, K.B.; Hughes, J.S.; Gelder, R.

    2001-07-01

    The survey of radiation protection programmes for transport has been jointly performed by three scientific organisations I.P.S.N. (France), G.R.S. ( Germany), and N.R.P.B. (United kingdom) on behalf of the European Commission and the pertaining documentation summarises the findings and conclusions of the work that was undertaken with the principal objectives to provide guidance on the establishment, implementation and application of radiation protection programmes for the transport of radioactive materials by operators and the assessment and evaluation of such programmes by the competent authority and to review currently existing radiation protection programmes for the transport of radioactive materials. (N.C.)

  6. Dataudveksling mellem CAD og CAE programmer

    DEFF Research Database (Denmark)

    Sørensen, Torben; Conrad, Finn

    2001-01-01

    Når mange forskelligartede programmer benyttes til beregninger og anden databehandling på samme modeller er det nødvendig at udveksle modellerne mellem disse forskellige programmer. Biler og skibe bliver f.eks. typisk designet i 3D CAD systemer, mens CAD modellerne herefter anvendes i andre...... dedikerede IT-systemer i forbindelse montageplanlægningen, svejseplanlægningen, robotprogrammeringen mm. der således her et behov for at udveksle CAD modellen mellem de forskellige programmer. Udveksling af information mellem forskellige programmer og systemer kræver såvel en fælles specifikation af det...

  7. A leadership programme for critical care.

    Science.gov (United States)

    Crofts, Linda

    2006-08-01

    This paper describes the genesis, design and implementation of a leadership programme for critical care. This was an initiative funded by the National Health Service (NHS) Nursing Leadership Project and had at the core of its design flexibility to meet the needs of the individual hospitals, which took part in it. Participation was from the multi-disciplinary critical care team. Six NHS hospitals took part in the programme which was of 20 days duration and took place on hospital sites. The programme used the leadership model of as its template and had a number of distinct components; a baseline assessment, personal development, principles of leadership and critical case reviews. The programme was underpinned by three themes; working effectively in multi-professional teams to provide patient focussed care, managing change through effective leadership and developing the virtual critical care service. Each group set objectives pertinent to their own organisation's needs. The programme was evaluated by a self-reporting questionnaire; group feedback and feedback from stakeholders. Programme evaluation was positive from all the hospitals but it was clear that the impact of the programme varied considerably between the groups who took part. It was noted that there was some correlation between the success of the programme and organisational 'buy in' as well as the organisational culture within which the participants operated. A key feature of the programme success was the critical case reviews, which were considered to be a powerful learning tool and medium for group learning and change management.

  8. Nuclear power programmes in developing countries

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    The paper on ''Nuclear power programmes in developing countries'' is a report to the IAEA by a Senior Expert Group. A description is given of the requirements for a successful nuclear power programme, including the constraints that developing countries might face in the introduction and execution of the programme. The group attempted to identify the main issues affecting the financing of nuclear power projects and suggested specific actions that could be undertaken in order to reduce economic and financial risks. The various issues were discussed under the topic headings:-programme-project-related factors, investment climate, financing plan, export credits and creditworthiness. (U.K.)

  9. Building a global business continuity programme.

    Science.gov (United States)

    Lazcano, Michael

    2014-01-01

    Business continuity programmes provide an important function within organisations, especially when aligned with and supportive of the organisation's goals, objectives and organisational culture. Continuity programmes for large, complex international organisations, unlike those for compact national companies, are more difficult to design, build, implement and maintain. Programmes for international organisations require attention to structural design, support across organisational leadership and hierarchy, seamless integration with the organisation's culture, measured success and demonstrated value. This paper details practical, but sometimes overlooked considerations for building successful global business continuity programmes.

  10. Biomass programme: Overview of the 2006 Swiss research programme; Programm Biomasse. Ueberblicksbericht zum Forschungsprogramm 2006

    Energy Technology Data Exchange (ETDEWEB)

    Binggeli, D.; Guggisberg, B.

    2007-07-01

    This report for the Swiss Federal Office of Energy (SFOE) reviews work done within the framework of the Swiss biomass research programme in 2006. The programme concentrates on the efficient conversion of biomass into heat, electrical power and motor fuels. Projects concerned with the optimisation of processes are reported on, including low-particle-emission systems, control systems for bivalent heating installations, use of demanding biomass fuels, combined pellets and solar heating systems and the elimination of ammonia emissions. In the material flow area, measurement campaigns, organic pollutants in compost, the effects of fermented wastes in agriculture and methane losses in biogas conditioning are reported on. New conversion technologies are reviewed, including hydro-thermal gasification, plant-oil fuelled combined heat and power units, flameless burners and catalytic direct liquefaction. In the area of basics, studies and concepts, eco-balances and life-cycle analyses are reported on; the production of synthetic natural gas and the influence of combustion particles are discussed and decentralised power generation from solid biomass is reported on. National and international co-operation is reviewed. The report is concluded with a review of eight pilot and demonstration projects, a review of work to be done in 2007 and a list of research and demonstration projects.

  11. 30 CFR 14.7 - Approval marking and distribution records.

    Science.gov (United States)

    2010-07-01

    ..., EVALUATION, AND APPROVAL OF MINING PRODUCTS REQUIREMENTS FOR THE APPROVAL OF FLAME-RESISTANT CONVEYOR BELTS General Provisions § 14.7 Approval marking and distribution records. (a) An approved conveyor belt must be marketed only under the name specified in the approval. (b) Approved conveyor belt must be legibly and...

  12. Mark 4A DSN receiver-exciter and transmitter subsystems

    Science.gov (United States)

    Wick, M. R.

    1986-01-01

    The present configuration of the Mark 4A DSN Receiver-Exciter and Transmitter Subsystems is described. Functional requirements and key characteristics are given to show the differences in the capabilities required by the Networks Consolidation task for combined High Earth Orbiter and Deep Space Network tracking support.

  13. Transition-Marking Behaviors of Adolescent Males at First Intercourse.

    Science.gov (United States)

    McLean, Ann L.; Flanigan, Beverly J.

    1993-01-01

    Examined male transition-marking behaviors from adolescence into adulthood at first intercourse. Findings from 80 adolescent males revealed that alcohol use at first intercourse was unrelated to use of contraceptives at that time but was inversely related to whether first intercourse was planned. Planning was positively related to contraceptive…

  14. Experimental investigations on fiber laser color marking of steels

    International Nuclear Information System (INIS)

    Amara, E.H.; Haïd, F.; Noukaz, A.

    2015-01-01

    Highlights: • We develop an experimental approach with the aim to bring a contribution to the comprehension of the occurring phenomena during laser color marking of steels. • We have used a home-made marking device composed of a pulsed fiber laser and galvanometric mirrors. • Both commercial and elaborated in laboratory steels have been used as samples. • The experiments have been performed for different laser beam operating parameters, under normal atmospheric conditions. • The treated samples were analyzed either by optical and scanning electronic microscopy, as well as by energy dispersion spectroscopy. - Abstract: We develop an experimental approach with the aim to bring a contribution to the comprehension of the occurring phenomena during laser color marking of steels. A home-made marking device using a pulsed fiber laser has been used to treat steel samples under different laser beam operating parameters, for different compositions of the processed steel, and at normal atmospheric conditions. The treated samples were analyzed either by optical and scanning electronic microscopy, as well as by energy dispersion spectroscopy. The results show the influence of the operating parameters on the obtained colors

  15. The Information Literacy of Survey Mark Hunting: A Dialogue

    Directory of Open Access Journals (Sweden)

    Jennifer Galas

    2016-11-01

    Full Text Available In Brief: This article makes connections between the ACRL Framework for Information Literacy for Higher Education and the activity of survey mark hunting. After a brief review of the literature related to geographic information systems (GIS, information literacy, and gamification of learning, the authors enter into a dialogue in which they discover and describe the...

  16. A comparison of three techniques for fluorochrome marking of ...

    African Journals Online (AJOL)

    Intramuscular injection of the antibiotic oxytetracycline (OTC) has been the only method previously employed for chemically marking C. gariepinus otoliths for ageing studies. This study compared intramuscular injection, immersion, and dietary incorporation methods of administering OTC to determine the most effective ...

  17. Feather pecking in growers: a study with individually marked birds

    DEFF Research Database (Denmark)

    Wechsler, B; Huber-Eicher, B; Nash, David Richard

    1998-01-01

    1. The aim of the present study was to investigate whether individual birds specialise in feather pecking. Growers were individually marked and reared in groups of 30 or 31 in pens with a slatted floor. At an age of 4 to 6 weeks feather pecking was frequent in all pens. 2. On average 83% of all g...

  18. The scent marking behaviour of the brown hyaena Hyaena brunnea

    African Journals Online (AJOL)

    1977). Here urine marking is seen to be used as a signal showing that, although there might be a food odour at a particular place, the food has been eaten. In addition to this intra-group function pasting may also serve to pass information between ...

  19. Experimental investigations on fiber laser color marking of steels

    Energy Technology Data Exchange (ETDEWEB)

    Amara, E.H., E-mail: amara@cdta.dz; Haïd, F.; Noukaz, A.

    2015-10-01

    Highlights: • We develop an experimental approach with the aim to bring a contribution to the comprehension of the occurring phenomena during laser color marking of steels. • We have used a home-made marking device composed of a pulsed fiber laser and galvanometric mirrors. • Both commercial and elaborated in laboratory steels have been used as samples. • The experiments have been performed for different laser beam operating parameters, under normal atmospheric conditions. • The treated samples were analyzed either by optical and scanning electronic microscopy, as well as by energy dispersion spectroscopy. - Abstract: We develop an experimental approach with the aim to bring a contribution to the comprehension of the occurring phenomena during laser color marking of steels. A home-made marking device using a pulsed fiber laser has been used to treat steel samples under different laser beam operating parameters, for different compositions of the processed steel, and at normal atmospheric conditions. The treated samples were analyzed either by optical and scanning electronic microscopy, as well as by energy dispersion spectroscopy. The results show the influence of the operating parameters on the obtained colors.

  20. Külaline kunstiilma tipust / Mark Jones ; intervjueerinud Tanel Veenre

    Index Scriptorium Estoniae

    Jones, Mark

    2010-01-01

    Kumu Kunstimuuseumis on 23. jaanuarini 2011 avatud näitus "John Constable. Victoria & Alberti muuseumi kogudest". Tallinnas viibinud muuseumi direktori söör Mark Jonesiga John Costable'i loomingust, Tallinna näitusest, Constable'i kollektsioonist Victoria & Alberti muuseumis, Victoria & Alberti muuseumist ja selle näitustest

  1. Distinct patterns of epigenetic marks and transcription factor binding ...

    Indian Academy of Sciences (India)

    Distinct patterns of epigenetic marks and transcription factor binding sites across promoters of sense-intronic long noncoding RNAs. Sourav Ghosh, Satish Sati, Shantanu Sengupta and Vinod Scaria. J. Genet. 94, 17–25. Gencode V9 lncRNA gene : 11004. Known lncRNA : 1175. Novel lncRNA : 5898. Putative lncRNA :.

  2. Review of The Economy of the Earth (Mark Sagoff)

    OpenAIRE

    Clive L. Spash

    2009-01-01

    Review of the second edition of Mark Sagoff's critique of environmental economics, criticising the author's black-and-white approach and his failure to discuss much of what has changed in the field since the first edition of the book was published in 1988.

  3. Selected results from the Mark II at SPEAR

    International Nuclear Information System (INIS)

    Scharre, D.L.

    1980-06-01

    Recent results on radiative transitions from the psi(3095), charmed meson decay, and the Cabibbo-suppressed decay tau → K* ν/sub tau/ are reviewed. The results come primarily from the Mark II experiment at SPEAR, but preliminary results from the Crystal Ball experiment on psi radiative transitions are also discussed

  4. 49 CFR 192.63 - Marking of materials.

    Science.gov (United States)

    2010-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.63 Marking of materials. (a) Except as...

  5. 7 CFR 340.7 - Marking and identity.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Marking and identity. 340.7 Section 340.7 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE... identity. (a) Any regulated article to be imported other than by mail, shall, at the time of importation...

  6. 7 CFR 319.75-5 - Marking and identity.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Marking and identity. 319.75-5 Section 319.75-5 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION... identity. (a) Any restricted article at the time of importation shall plainly and correctly bear on the...

  7. ANALYSIS OF FINANCE AND MARK OFF SUCCESS FINANCIAL MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Nebojša Maksimović

    2010-09-01

    Full Text Available Any sports club organization is main tool for achieving his goals. If club’s basic goal – to achieve standard business performances (work characteristics and business – mark of efficiency his organization or his organizational diagnostics, demands maintenance on economic (finance analysis. In this research, with assisted program FINMEN set an example of financial management analysis in sports organizations

  8. Probabilistic Safety Assessment Of It TRIGA Mark-II Reactor

    International Nuclear Information System (INIS)

    Ergun, E; Kadiroglu, O.S.

    1999-01-01

    The probabilistic safety assessment for Istanbul Technical University (ITU) TRIGA Mark-II reactor is performed. Qualitative analysis, which includes fault and event trees and quantitative analysis which includes the collection of data for basic events, determination of minimal cut sets, calculation of quantitative values of top events, sensitivity analysis and importance measures, uncertainty analysis and radiation release from fuel elements are considered

  9. Beyond δ : Tailoring marked statistics to reveal modified gravity

    Science.gov (United States)

    Valogiannis, Georgios; Bean, Rachel

    2018-01-01

    Models that seek to explain cosmic acceleration through modifications to general relativity (GR) evade stringent Solar System constraints through a restoring, screening mechanism. Down-weighting the high-density, screened regions in favor of the low density, unscreened ones offers the potential to enhance the amount of information carried in such modified gravity models. In this work, we assess the performance of a new "marked" transformation and perform a systematic comparison with the clipping and logarithmic transformations, in the context of Λ CDM and the symmetron and f (R ) modified gravity models. Performance is measured in terms of the fractional boost in the Fisher information and the signal-to-noise ratio (SNR) for these models relative to the statistics derived from the standard density distribution. We find that all three statistics provide improved Fisher boosts over the basic density statistics. The model parameters for the marked and clipped transformation that best enhance signals and the Fisher boosts are determined. We also show that the mark is useful both as a Fourier and real-space transformation; a marked correlation function also enhances the SNR relative to the standard correlation function, and can on mildly nonlinear scales show a significant difference between the Λ CDM and the modified gravity models. Our results demonstrate how a series of simple analytical transformations could dramatically increase the predicted information extracted on deviations from GR, from large-scale surveys, and give the prospect for a much more feasible potential detection.

  10. Transient Central Diabetes Insipidus and Marked Hypernatremia following Cardiorespiratory Arrest

    Directory of Open Access Journals (Sweden)

    Sahar H. Koubar

    2017-01-01

    Full Text Available Central Diabetes Insipidus is often an overlooked complication of cardiopulmonary arrest and anoxic brain injury. We report a case of transient Central Diabetes Insipidus (CDI following cardiopulmonary arrest. It developed 4 days after the arrest resulting in polyuria and marked hypernatremia of 199 mM. The latter was exacerbated by replacing the hypotonic urine by isotonic saline.

  11. Review of results from the Mark 2 experiment at SLC

    International Nuclear Information System (INIS)

    Coupal, D.P.

    1990-07-01

    This paper reviews results on Z degree physics from the 1989 run of the Mark 2 experiment at the SLAC Linear Collider. Based on about 20 nb -1 we present results on the mass, width and branching ratios of the Z degree boson, the number of light neutrino species, properties of hadronic decays and searches for new particles. 16 refs., 9 figs

  12. The silicon strip detector at the Mark 2

    International Nuclear Information System (INIS)

    Jacobsen, R.; Golubev, V.; Lueth, V.; Barnett, B.; Dauncey, P.; Matthews, J.; Adolphsen, C.; Burchat, P.; Gratta, G.; King, M.; Labarga, L.; Litke, A.; Turala, M.; Zaccardelli, C.

    1990-04-01

    We have installed a Silicon Strip Vertex Detector in the Mark II detector at the Stanford Linear Collider. We report on the performance of the detector during a recent test run, including backgrounds, stability and charged particle tracking. 10 refs., 9 figs

  13. Young Children's Intonational Marking of New, Given and Contrastive Referents

    Science.gov (United States)

    Grünloh, Thomas; Lieven, Elena; Tomasello, Michael

    2015-01-01

    In the current study we investigate whether 2- and 3-year-old German children use intonation productively to mark the informational status of referents. Using a story-telling task, we compared children's and adults' intonational realization via pitch accent (H*, L* and de-accentuation) of New, Given, and Contrastive referents. Both children and…

  14. Koht, kust tagasi ei tulda / Mark Jenkins ; fotod Cory Richards

    Index Scriptorium Estoniae

    Jenkins, Mark

    2015-01-01

    National Geographicu ekspeditsiooni, mille koosseisu kuulusid Renan Ozturk, Mark Jenkins, Cory Richards, Emily Harrington ja Kilaree O'Neill, püüdlustest tõusta Kagu-Aasia kõrgeima mäe Hkakabo Razi tippu ning mõõta selle täpset kõrgust GPS-i abil

  15. Convicted by a bite mark, Ted Bundy (1946-1989).

    Science.gov (United States)

    Riaud, Xavier

    2014-01-01

    The identification of a murderer and the eventual conviction was largely due to forensic dentistry and in particular the use of bite marks on the victim compared with casts of the teeth of the accused. The Bundy case has become notorious in American legal circles.

  16. Twenty years of Triga Mark I reactor use

    International Nuclear Information System (INIS)

    Stasiulevicius, R.; Maretti Junior, F.

    1981-01-01

    This work is a report on the 20 years of activities of the Triga Mark I, research reactor located in Belo Horizonte, Brazil. It contains also a list of publications, details of operation and improvements introduced in the reactor as well as some perspectives for its future. (A.C.A.S.)

  17. A procedure for selection on marking in hardwoods

    Science.gov (United States)

    George R., Jr. Trimble; Joseph J. Mendel; Richard A. Kennell

    1974-01-01

    This method of applying individual-tree selection silviculture to hardwood stands combines silvicultural considerations with financial maturity guidelines into a tree-marking system. To develop this system it was necessary to determine rates of return based on 4/4 lumber, for many of the important Appalachian species. Trees were viewed as capital investments that...

  18. Residual contamination and corrosion on electrochemically marked uranium

    International Nuclear Information System (INIS)

    Seals, R.D.; Bullock, J.S.; Bennett, R.K.

    1981-01-01

    Residual contamination and potential corrosion problems on uranium parts resulting from PHB-1 and PHB-1E electroetchants have been investigated using ion microprobe mass analysis (IMMA), scanning electron microscopy (SEM), and light microscopy (LM). The effectiveness of various solvent cleaning sequences and the influence of the use of an abrasive cleaner were evaluated. The marking thicknesses and chlorine distributions were determined

  19. How Prosody Marks Shifts in Footing in Classroom Discourse

    Science.gov (United States)

    Skidmore, David; Murakami, Kyoko

    2010-01-01

    Prosody refers to features of speech such as intonation, volume and pace. In this paper, we examine teacher-student dialogue in an English lesson at a secondary school in England, using Conversation Analysis notation to mark features of prosody. We also make connections with Goffman's theoretical concept of footing. We show that, within an episode…

  20. The Mark III vertex chamber and prototype test results

    International Nuclear Information System (INIS)

    Grab, C.

    1987-07-01

    A vertex chamber has been constructed for use in the Mark III experiment. The chamber is positioned inside the current main drift chamber and will be used to trigger data collection, to aid in vertex reconstruction, and to improve the momentum resolution. This paper discusses the chamber's construction and performance and tests of the prototype