WorldWideScience

Sample records for programme background design

  1. Programmable Array Logic Design

    International Nuclear Information System (INIS)

    Demon Handoyo; Djen Djen Djainal

    2007-01-01

    Good digital circuit design that part of a complex system, often becoming a separate problem. To produce finishing design according to wanted performance is often given on to considerations which each other confuse, hence thereby analyse optimization become important in this case. To realization is made design logic program, the first are determined global diagram block, then are decided contents of these block diagram, and then determined its interconnection in the form of logic expression, continued with election of component. These steps are done to be obtained the design with low price, easy in its interconnection, minimal volume, low power and certainty god work. (author)

  2. Gas cooled fast reactor background, facilities, industries and programmes

    International Nuclear Information System (INIS)

    Dalle Donne, M.

    1980-05-01

    This report was prepared at the request of the OECD-NEA Coordinating Group on Gas Cooled Fast Reactor Development and it represents a contribution (Vol.II) to the jointly sponsored Vol.I (GCFR Status Report). After a chapter on background with a brief description of the early studies and the activities in the various countries involved in the collaborative programme (Austria, Belgium, France, Germany, Japan, Sweden, Switzerland, United Kingdom and United States), the report describes the facilities available in those countries and at the Gas Breeder Reactor Association and the industrial capabilities relevant to the GCFR. Finally the programmes are described briefly with programme charts, conclusions and recommendations are given. (orig.) [de

  3. Design and Innovation - The DTU programme

    DEFF Research Database (Denmark)

    Alting, Leo; Andreasen, Mogens Myrup; Boelskifte, Per

    2006-01-01

    of the accompanying research. It is illustrated how the development of particularly the socio-technical dimensions of design and innovation are based on a close observation of the challenges facing industry. The new competences are expected to support modernisation of industrial methods and organisational schemes......The new design & innovation programme at DTU represents a fundamental rethinking of the standard concepts dominating most engineering educations. The teaching, its background, context and basic educational ideas are presented and discussed in this paper together with the basic ideas...

  4. Disarmament and Employment: Background for a Research Programme.

    Science.gov (United States)

    Sabolo, Yves

    1983-01-01

    As background to a series of articles on the effects of disarmament on employment, the author assesses the present importance of armaments industries in the world economy, including the number of people directly or indirectly employed in military equipment production and services. He also discusses employment problems posed by disarmament.…

  5. Programmable electronic system design & verification utilizing DFM

    NARCIS (Netherlands)

    Houtermans, M.J.M.; Apostolakis, G.E.; Brombacher, A.C.; Karydas, D.M.

    2000-01-01

    The objective of this paper is to demonstrate the use of the Dynamic Flowgraph Methodology (DIM) during the design and verification of programmable electronic safety-related systems. The safety system consists of hardware as well as software. This paper explains and demonstrates the use of DIM to

  6. Circumpolar Biodiversity Monitoring Programme coastal biodiversity monitoring background paper

    Science.gov (United States)

    McLennan, Donald; Anderson, Rebecca D.; Wegeberg, S.; Pettersvik Arvnes, Maria; Sergienko, Liudmila; Behe, Carolina; Moss-Davies, Pitseolak; Fritz, S.; Markon, Carl J.; Christensen, T.; Barry, T.; Price, C.

    2016-01-01

    In 2014, the United States (U.S.) and Canada agreed to act as co-lead countries for the initial development of the Coastal Expert Monitoring Group (CEMG) as part of the Circumpolar Biodiversity Monitoring Program (CBMP, www. cbmp.is) under the Arctic Council’s Conservation of Arctic Flora and Fauna (CAFF, www.caff.is) working group. The CAFF Management Board approved Terms of Reference for the CEMG in the spring of 2014. The primary goal of the CEMG is to develop a long term, integrated, multi-disciplinary, circumpolar Arctic Coastal Biodiversity Monitoring Plan (the Coastal Plan) that relies on science and Traditional Knowledge, and has direct and relevant application for communities, industry, government decision makers, and other users. In addition to the monitoring plan, the CAFF working group has asked the CBMP, and thus the CEMG, to develop an implementation plan that identifies timeline, costs, organizational structure and partners. This background paper provides a platform for the guidance for the development of the Coastal Plan and is produced by the CEMG with assistance from a number of experts in multiple countries.

  7. Monitoring programmes for internal exposure: designing criteria

    International Nuclear Information System (INIS)

    Rojo, Ana M.; Gomez Parada, Ines.

    2007-01-01

    The purpose of this document is to offer guidance for the decision whether a monitoring programme is required and how it should be designed. It can be also used as a tool for making the standing programmes consistent with the most recent publications on internal dosimetry, such as ISO 20553 'Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material', specific publications of the IAEA and ICRP, and including the conclusions of the OMINEX Project ('Optimisation of Monitoring for Internal Exposures') and IDEAS Project. It is established that the general purpose of the monitoring is verify that each worker is protected adequately against risks from radionuclide intakes and document that the protection complies with legal requirements. The criteria for a particular monitoring programme designing is based on the magnitude of the probable intake and the possibility of detecting a significant event when it occurs. So, the risk assessment for each work process must be evaluated and each worker is classified accordingly. This classification implies the acceptance of reference effective dose values (1 y 6 mSv/y ). (author) [es

  8. Multinational design evaluation programme - 2009 annual report

    International Nuclear Information System (INIS)

    2010-06-01

    The Multinational Design Evaluation Programme (MDEP) was established in 2006 as a multinational initiative to develop innovative approaches to leverage the resources and knowledge of the national regulatory authorities who are currently or will be tasked with the review of new reactor power plant designs. MDEP comprises 13 countries' nuclear regulatory authorities and is structured under 3 design-specific working groups and 3 issue-specific working groups which meet several times a year. The OECD/NEA facilitates MDEP's activities by acting as technical secretariat for the programme. The MDEP Policy Group (PG) and the Steering Technical Committee (STC) oversee the programme. MDEP's main objectives can be defined as follows: - to enhance multilateral co-operation within existing regulatory frameworks; - to encourage multinational convergence of codes, standards and safety goals; - to implement the MDEP products in order to facilitate the licensing of new reactors, including those being developed by the Generation IV International Forum. To carry out the work, two main lines of activity have been implemented: - the exploration of opportunities for harmonisation of regulatory practices; - the cooperation on the safety reviews of specific reactor designs. MDEP engages with key stakeholders involved in ensuring the safety of new reactor designs, manufacturing, construction and operation. At this time, these stakeholders include other national regulatory authorities and international organisations involved in ensuring nuclear safety including the IAEA, Western European Nuclear Regulators' Association (WENRA), NEA Committees on Nuclear Regulatory Activities (CNRA) and Safety of Nuclear Installations (CSNI), the various reactor vendors, nuclear component manufacturers, mechanical and electrical standards development organisations, reactor operators and licensees and key industry representatives such as World Nuclear Association (WNA). To this end, the MDEP has organised a

  9. Teaching design engineering in an interdisciplinary programme

    NARCIS (Netherlands)

    Wits, Wessel Willems; Homminga, Jasper Johan; Endedijk, Maaike Dorine; Visscher, Klaasjan; Krab-Hüsken, Leonie; van den Berg, Frank; Wilhelm, P.

    2014-01-01

    ATLAS, the Academy of Technology and Liberal Arts & Sciences, is an interdisciplinary three-year Bachelor of Science honours programme for talented students that opened its doors in September 2013. This international programme uses the concept of project-led education to teach students to integrate

  10. Isotopes Help Design Better Nutrition Programmes

    International Nuclear Information System (INIS)

    Mohamad, Daud

    2014-01-01

    Good nutrition is essential for good health. To ensure proper nutrition, energydense fat, protein and carbohydrates need to be accompanied by vitamins and minerals. Malnutrition is the result of too much food or too little food and a lack of variety in the kinds of food eaten. More than 30% of young children suffer from some form of malnutrition with devastating consequences for health, learning, future earning potential, economic development, resilience and security. Undernutrition in early life, when accompanied by excessive weight gain later in childhood, increases the risk of chronic diseases in adulthood. Obesity has reached epidemic proportions globally, with at least 2.8 million adults dying each year from diseases related to overweight or obesity such as cardiovascular diseases, diabetes and some forms of cancer. Stable isotope techniques play an important role in the development and monitoring of interventions against malnutrition. Compared to other conventional techniques, these methods, which do not involve radiation, offer much more sensitive and specific measurements. They can be used to establish the ratio of lean tissue to fat in body composition; to estimate the number of calories spent each day; to determine whether breastfed babies are exclusively breastfed according to the recommendations issued by the World Health Organization (WHO); to assess a person’s vitamin A reserves; and to establish how well iron and zinc are utilized from local foods and diets. This provides Member States with information to help them design or improve their national health and nutrition programmes

  11. Multinational Design Evaluation Programme (MDEP) - Safety Goals

    International Nuclear Information System (INIS)

    Vaughan, G.J.

    2011-01-01

    One of the aims of the NEA's Multinational Design Evaluation Programme (MDEP) is to work towards greater harmonisation of regulatory requirements. To achieve this aim, it is necessary that there is a degree of convergence on the safety goals that are required to be met by designers and operators. The term 'safety goals' is defined to cover all health and safety requirements which must be met: these may be deterministic rules and/or probabilistic targets. They should cover the safety of workers, public and the environment in line with the IAEA's Basic Safety Objective; encompassing safety in normal operation through to severe accidents. MDEP is also interested in how its work can be extended to future reactors, which may use significantly different technology to the almost ubiquitous LWRs used today and in the next generation, building on the close co-operation within MDEP between the regulators who are currently engaged in constructing or carrying out design reviews on new designs. For two designs this work has involved several regulators sharing their safety assessments and in some cases issuing statements on issues that need to be addressed. Work is also progressing towards joint regulatory position statements on specific assessment areas. Harmonisation of safety goals will enhance the cooperation between regulators as further developments in design and technology occur. All regulators have safety goals, but these are expressed in many different ways and exercises in comparing them frequently are done at a very low level eg specific temperatures in the reactor vessel of a specific reactor type. The differences in the requirements from different regulators are difficult to resolve as the goals are derived using different principles and assumptions and are often for a specific technology. Therefore a different approach is being investigated, starting with the top-level safety goals and try to derive a structure and means of deriving lower tier

  12. A new framework for designing programmes of assessment.

    Science.gov (United States)

    Dijkstra, J; Van der Vleuten, C P M; Schuwirth, L W T

    2010-08-01

    Research on assessment in medical education has strongly focused on individual measurement instruments and their psychometric quality. Without detracting from the value of this research, such an approach is not sufficient to high quality assessment of competence as a whole. A programmatic approach is advocated which presupposes criteria for designing comprehensive assessment programmes and for assuring their quality. The paucity of research with relevance to programmatic assessment, and especially its development, prompted us to embark on a research project to develop design principles for programmes of assessment. We conducted focus group interviews to explore the experiences and views of nine assessment experts concerning good practices and new ideas about theoretical and practical issues in programmes of assessment. The discussion was analysed, mapping all aspects relevant for design onto a framework, which was iteratively adjusted to fit the data until saturation was reached. The overarching framework for designing programmes of assessment consists of six assessment programme dimensions: Goals, Programme in Action, Support, Documenting, Improving and Accounting. The model described in this paper can help to frame programmes of assessment; it not only provides a common language, but also a comprehensive picture of the dimensions to be covered when formulating design principles. It helps identifying areas concerning assessment in which ample research and development has been done. But, more importantly, it also helps to detect underserved areas. A guiding principle in design of assessment programmes is fitness for purpose. High quality assessment can only be defined in terms of its goals.

  13. Optimizing study design for multi-species avian monitoring programmes

    Science.gov (United States)

    Jamie S. Sanderlin; William M. Block; Joseph L. Ganey

    2014-01-01

    Many monitoring programmes are successful at monitoring common species, whereas rare species, which are often of highest conservation concern, may be detected infrequently. Study designs that increase the probability of detecting rare species at least once over the study period, while collecting adequate data on common species, strengthen programme ability to address...

  14. Applying the Ottawa Charter to inform health promotion programme design.

    Science.gov (United States)

    Fry, Denise; Zask, Avigdor

    2017-10-01

    There is evidence of a correlation between adoption of the Ottawa Charter's framework of five action areas and health promotion programme effectiveness, but the Charter's framework has not been as fully implemented as hoped, nor is generally used by formal programme design models. In response, we aimed to translate the Charter's framework into a method to inform programme design. Our resulting design process uses detailed definitions of the Charter's action areas and evidence of predicted effectiveness to prompt greater consideration and use of the Charter's framework. We piloted the process by applying it to the design of four programmes of the Healthy Children's Initiative in New South Wales, Australia; refined the criteria via consensus; and made consensus decisions on the extent to which programme designs reflected the Charter's framework. The design process has broad potential applicability to health promotion programmes; facilitating greater use of the Ottawa Charter framework, which evidence indicates can increase programme effectiveness. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  15. Programmable multi-node quantum network design and simulation

    Science.gov (United States)

    Dasari, Venkat R.; Sadlier, Ronald J.; Prout, Ryan; Williams, Brian P.; Humble, Travis S.

    2016-05-01

    Software-defined networking offers a device-agnostic programmable framework to encode new network functions. Externally centralized control plane intelligence allows programmers to write network applications and to build functional network designs. OpenFlow is a key protocol widely adopted to build programmable networks because of its programmability, flexibility and ability to interconnect heterogeneous network devices. We simulate the functional topology of a multi-node quantum network that uses programmable network principles to manage quantum metadata for protocols such as teleportation, superdense coding, and quantum key distribution. We first show how the OpenFlow protocol can manage the quantum metadata needed to control the quantum channel. We then use numerical simulation to demonstrate robust programmability of a quantum switch via the OpenFlow network controller while executing an application of superdense coding. We describe the software framework implemented to carry out these simulations and we discuss near-term efforts to realize these applications.

  16. The radiation exposure control programme - its effect on design

    International Nuclear Information System (INIS)

    Simmons, R.B.V.

    1975-01-01

    The paper discusses how the Power Projects design organization has responded to the problem of operational exposure. This response took the form of an organized formal Programme developed during the Bruce G.S. design phase. This Radiation Exposure Control Programme considered: radiation conditions, number of items requiring attention, number of occasions item requires attention and manhours involved on each occasion. Analysis of these factors and comparison with target values enabled worthwhile reductions to be made in estimated operating exposure. Activity transport studies, reliability and design detail improvements have all received an impetus from the Programme. The Programme which has value both from the economic and the health physics points of view is now a continuing feature of the CANDU plant design process. (author)

  17. Contracts for Cooperation between Web Service Programmers and HTML Designers

    DEFF Research Database (Denmark)

    Böttger, Henning; Møller, Anders; Schwartzbach, Michael I.

    2006-01-01

    Interactive Web services consist of a mixture of HTML fragments and program code. The fragments, which are maintained by designers, are combined to form HTML pages that are shown to the clients. The code, which is maintained by programmers, is executed on the server to handle the business logic....... Current Web service frameworks provide little help in separating these constituents, which complicates cooperation between programmers and HTML designers. We propose a system based on XML templates and formalized contracts allowing a flexible separation of concerns. The contracts act as interfaces between...... the programmers and the HTML designers and permit tool support for statically checking that both parties fulfill their obligations. This ensures that (1) programmers and HTML designers work more independently focusing on their own expertises, (2) the Web service implementation is better structured and thus easier...

  18. Introduction to embedded system design using field programmable gate arrays

    CERN Document Server

    Dubey, Rahul

    2009-01-01

    Offers information on the use of field programmable gate arrays (FPGAs) in the design of embedded systems. This text considers a hypothetical robot controller as an embedded application and weaves around it related concepts of FPGA-based digital design. It is suitable for both students and designers who have worked with microprocessors.

  19. Shaping a New Service Design Programme

    DEFF Research Database (Denmark)

    Morelli, Nicola; Götzen, Amalia De

    2014-01-01

    The growing interest in service design is calling for specific education programs, at a moment in which the framework for the discipline itself is still under construction. Service Design represents a quite complex domain: a service design education should include insights from management, system...

  20. Efficient Design of OFDMA-Based Programmable Wireless Radios

    Directory of Open Access Journals (Sweden)

    Shah SFA

    2008-01-01

    Full Text Available With the increasing demand for efficient spectrum management, programmable wireless radios can potentially play a key role in shaping our future spectrum use. In this paper, we consider the design of low-power programmable wireless radios based on orthogonal frequency division multiple access (OFDMA. To meet the demands of higher data rate communications, we split OFDMA symbols carrying multiuser data across several noncontiguous bands of available spectrum. To relax power consumption in analog-to-digital and digital-to-analog converters, we use a programmable narrowband RF front end comprising of programmable synthesizers and fixed low-pass filters. To perform digital baseband signal processing in an energy efficient manner, we propose efficient designs for the fast Fourier transform (FFT and inverse FFT (IFFT modules. Our designs of the FFT/IFFT modules reduce power consumption and chip area, and are capable of handling the dynamic nature of spectrum in programmable radios. To recover data that falls within the transition band of the filters, we propose a combiner similar to maximal ratio combiner. We also present the complete design of programmable wireless radios in accordance with the IEEE 802.22 (draft standard.

  1. Efficient Design of OFDMA-Based Programmable Wireless Radios

    Directory of Open Access Journals (Sweden)

    A. H. Tewfik

    2008-03-01

    Full Text Available With the increasing demand for efficient spectrum management, programmable wireless radios can potentially play a key role in shaping our future spectrum use. In this paper, we consider the design of low-power programmable wireless radios based on orthogonal frequency division multiple access (OFDMA. To meet the demands of higher data rate communications, we split OFDMA symbols carrying multiuser data across several noncontiguous bands of available spectrum. To relax power consumption in analog-to-digital and digital-to-analog converters, we use a programmable narrowband RF front end comprising of programmable synthesizers and fixed low-pass filters. To perform digital baseband signal processing in an energy efficient manner, we propose efficient designs for the fast Fourier transform (FFT and inverse FFT (IFFT modules. Our designs of the FFT/IFFT modules reduce power consumption and chip area, and are capable of handling the dynamic nature of spectrum in programmable radios. To recover data that falls within the transition band of the filters, we propose a combiner similar to maximal ratio combiner. We also present the complete design of programmable wireless radios in accordance with the IEEE 802.22 (draft standard.

  2. Multinational design evaluation programme. Annual Report April 2015-April 2016

    International Nuclear Information System (INIS)

    2016-05-01

    The Multinational Design Evaluation Programme (MDEP) is a multinational initiative to leverage the resources and knowledge of national regulatory authorities that are, or will shortly be, undertaking the review of new reactor power plant designs. MDEP incorporates a broad range of activities including enhancing multilateral co-operation within existing regulatory frameworks, and increasing multinational convergence of codes, standards, guides, and safety goals. A key concept throughout the work of MDEP is that national regulators retain sovereign authority for all licensing and regulatory decisions. Working groups are implementing the activities in accordance with programme plans with specific activities and goals, and have established the necessary interfaces both within and outside of MDEP. This report provides a status of the programme after its eighth year of implementation. Content: Executive Summary; 1 - Introduction; 2 - Programme goals and outcomes; 3 - Programme implementation (Membership, Organizational structure, MDEP Library, Common positions); 4 - Interactions with other organizations; 5 - Current activities (EPR Working Group (EPRWG), AP1000 Working Group (AP1000WG), APR1400 Design-specific Working Group (APR1400WG), VVER Working Group (VVERWG), ABWR Working Group (ABWRWG), Vendor Inspection Co-operation Working Group (VICWG), Codes and Standards Working Group (CSWG), Digital Instrumentation and Controls Working Group (DICWG); 6 - Interim results; 7 - Next steps - future of the programme; appendix 1: List of abbreviations and acronyms; Appendix 2: Revised documents and publications; Appendix 3: Photographs of reactors considered within MDEP

  3. Mechanism design visual and programmable approaches

    CERN Document Server

    Russell, Kevin; Sodhi, Raj S

    2013-01-01

    "… the book provides a lot of MATLAB® and SimMechanics examples. Students could benefit from the experience of solving the complex spatial synthesis problems using computer tools. The mathematics software tools are very efficient to do the displacement analysis, too."-Wen-Tzong Lee, National Pingtung University of Science and Technology, Neipu, Taiwan"The book covers a vast range of mechanism kinematics and design. The algorithm covering the topics presented is useful for mechanism design in class and homework assignments. The book provides an alternative modern tool, as compared to kinematics analysis methods based on Fortran or QuickBasic algorithms, covering all topics for mechanism design."-Thomas G. Chondros, University of Patras, Greece"… well elaborated for students at their first approach to the subject of mechanism design and its computation with MATLAB®."-Marco Ceccarelli, University of Cassino and South Latium, Italy.

  4. Mechatronic System Design Course for Undergraduate Programmes

    Science.gov (United States)

    Saleem, A.; Tutunji, T.; Al-Sharif, L.

    2011-01-01

    Technology advancement and human needs have led to integration among many engineering disciplines. Mechatronics engineering is an integrated discipline that focuses on the design and analysis of complete engineering systems. These systems include mechanical, electrical, computer and control subsystems. In this paper, the importance of teaching…

  5. Multinational Design Evaluation Programme. Annual Report - April 2014-April 2015

    International Nuclear Information System (INIS)

    2015-06-01

    The Multinational Design Evaluation Programme (MDEP) is a multinational initiative to leverage the resources and knowledge of national regulatory authorities who are, or will shortly be, undertaking the review of new reactor power plant designs. MDEP incorporates a broad range of activities including enhancing multilateral co-operation within existing regulatory frameworks, and increasing multinational convergence of codes, standards, guides and safety goals. A key concept throughout the work of MDEP is that national regulators retain sovereign authority for all licensing and regulatory decisions. Working groups are implementing the activities in accordance with programme plans with specific activities and goals, and have established the necessary interfaces both within and outside of MDEP. This report provides a status of the programme after its seventh year of implementation. Content: Executive summary; 1. Introduction; 2. Programme goals and outcomes; 3. Programme implementation (Membership, Organisational structure, MDEP Library, Common positions); 4. Interactions with other organisations; 5. Current activities (EPR Working Group (EPRWG), AP1000 Working Group (AP1000WG), APR1400 Working Group (APR1400WG), VVER Working Group (VVERWG), AVBWR Working Group (ABWRWG), Vendor Inspection Co-operation Working Group (VICWG), Codes and Standards Working Group (CSWG), Digital Instrumentation and Controls Working Group (DICWG)); 6. Interim results; 7. Next steps - Future of the programme; Appendix 1 - List of abbreviations and acronyms; Appendix 2 - Revised documents and publications; Appendix 3 - Photographs of reactors considered within MDEP

  6. Designing a portfolio management programme to optimize cash-flow

    International Nuclear Information System (INIS)

    Fassom, D.

    1996-01-01

    The design and implementation of any portfolio management programme must, by definition, be tailored to the drivers and particular objectives of the company owning the assets. This paper will concentrate on one of the most important driving forces, namely managing cash-flow. Five key steps are required to achieve an effective portfolio management programme: 1. establish targets/goals; 2. describe and value the assets in your company's portfolio; 3. identify and catalogue potential 'customers'; 4. construct appropriate deal structures and other strategies to achieve your targets; 5. work hard and do deals. (author)

  7. Reconfigurable lattice mesh designs for programmable photonic processors.

    Science.gov (United States)

    Pérez, Daniel; Gasulla, Ivana; Capmany, José; Soref, Richard A

    2016-05-30

    We propose and analyse two novel mesh design geometries for the implementation of tunable optical cores in programmable photonic processors. These geometries are the hexagonal and the triangular lattice. They are compared here to a previously proposed square mesh topology in terms of a series of figures of merit that account for metrics that are relevant to on-chip integration of the mesh. We find that that the hexagonal mesh is the most suitable option of the three considered for the implementation of the reconfigurable optical core in the programmable processor.

  8. Architectural design and analysis of a programmable image processor

    International Nuclear Information System (INIS)

    Siyal, M.Y.; Chowdhry, B.S.; Rajput, A.Q.K.

    2003-01-01

    In this paper we present an architectural design and analysis of a programmable image processor, nicknamed Snake. The processor was designed with a high degree of parallelism to speed up a range of image processing operations. Data parallelism found in array processors has been included into the architecture of the proposed processor. The implementation of commonly used image processing algorithms and their performance evaluation are also discussed. The performance of Snake is also compared with other types of processor architectures. (author)

  9. Competency-based education: programme design and challenges to implementation.

    Science.gov (United States)

    Gruppen, Larry D; Burkhardt, John C; Fitzgerald, James T; Funnell, Martha; Haftel, Hilary M; Lypson, Monica L; Mullan, Patricia B; Santen, Sally A; Sheets, Kent J; Stalburg, Caren M; Vasquez, John A

    2016-05-01

    Competency-based education (CBE) has been widely cited as an educational framework for medical students and residents, and provides a framework for designing educational programmes that reflect four critical features: a focus on outcomes, an emphasis on abilities, a reduction of emphasis on time-based training, and promotion of learner centredness. Each of these features has implications and potential challenges for implementing CBE. As an experiment in CBE programme design and implementation, the University of Michigan Master of Health Professions Education (UM-MHPE) degree programme was examined for lessons to be learned when putting CBE into practice. The UM-MHPE identifies 12 educational competencies and 20 educational entrustable professional activities (EPAs) that serve as the vehicle for both learning and assessment. The programme also defines distinct roles of faculty members as assessors, mentors and subject-matter experts focused on highly individualised learning plans adapted to each learner. Early experience with implementing the UM-MHPE indicates that EPAs and competencies can provide a viable alternative to traditional courses and a vehicle for rigorous assessment. A high level of individualisation is feasible but carries with it significant costs and makes intentional community building essential. Most significantly, abandoning a time-based framework is a difficult innovation to implement in a university structure that is predicated on time-based education. © 2016 John Wiley & Sons Ltd.

  10. Designing with Matter: From Programmable Materials to Processual Things

    Directory of Open Access Journals (Sweden)

    Agustina Andreoletti

    2016-11-01

    Full Text Available This paper explores the potential of active matter, from a practical exploration of the concept to a theoretical discussion based on the material findings. It begins by addressing the ideas of materiality and material performance through the project “Chrysalis Gemini” and then provides an overview of the notion of programmability.To this end, we move to the description and analysis of programming, focusing on its relationship with hardware, software and material. In particular, we address the idea of programmable matter, and we introduce the term processuality. We consider the importance of adaptability, analysing the experience of humans, their interaction with the environment, with artefacts and with material within a design context.In this manner this study seeks to highlight how contextualisation and interconnected processes become relevant as a design argument. This is achieved by presenting the relational potential of processual material and things and their ongoing transformation. 

  11. The design of the Work Programme in international context

    OpenAIRE

    Finn, Dan

    2011-01-01

    This report compares the design and procurement of the Work Programme (WP) with pertinent experience in Australia, the USA and the Netherlands. It considers the risks in the implementation of performance based contracts, their implications for the WP, and their address in the other countries. The review finds that contract and procurement systems in the comparator countries have been in flux as policy makers have sought to secure the advantages of contracting out whilst minimising attendant r...

  12. Studying Computer Science in a Multidisciplinary Degree Programme: Freshman Students' Orientation, Knowledge, and Background

    Science.gov (United States)

    Kautz, Karlheinz; Kofoed, Uffe

    2004-01-01

    Teachers at universities are facing an increasing disparity in students' prior IT knowledge and, at the same time, experience a growing disengagement of the students with regard to involvement in study activities. As computer science teachers in a joint programme in computer science and business administration, we made a number of similar…

  13. Multinational design evaluation programme - Annual report March 2013-March 2014

    International Nuclear Information System (INIS)

    2014-04-01

    The Multinational Design Evaluation Programme (MDEP) is a multinational initiative to leverage the resources and knowledge of national regulatory authorities who are, or will shortly be, undertaking the review of new reactor power plant designs. MDEP incorporates a broad range of activities including enhancing multilateral cooperation within existing regulatory frameworks, and increasing multinational convergence of codes, standards, guides, and safety goals. A key concept throughout the work of MDEP is that national regulators retain sovereign authority for all licensing and regulatory decisions. Working groups are implementing the activities in accordance with programme plans with specific activities and goals, and have established the necessary interfaces both within and outside of the MDEP members. In the past year, MDEP has expanded to include cooperation on the VVER and ABWR designs and additional members have begun participating in the programme to share their experiences on these design reviews. This report provides the current status of the programme. Significant progress is being made on the overall MDEP goals of increased cooperation and enhanced convergence of requirements and practices. In addition, the lessons learnt from the 11 March 2011, events at the Fukushima Daiichi nuclear power plant are being incorporated into MDEP activities through the programme plans of design-specific working groups (DSWG). On this topic, the EPR Working Group has issued a common position which will be supplemented by five technical appendices by the end of 2014. Other DSWG are in the process of drafting such common positions. Several DSWGs' are facilitating the MDEP programme goal of enhanced cooperation: the EPRWG, the Vendor Inspection Cooperation Working Group (VICWG), the Digital Instrumentation and Controls Working Group (DICWG), the Codes and Standards Working Group (CSWG). Accomplishments to date provide confidence that the MDEP membership, structure and processes

  14. Programme

    OpenAIRE

    Hobday, E, fl. 1905, artist

    2003-01-01

    A photograph of an illustrated programme listing dances. The illustration shows a snake charmer playing to a snake while another man watches. Buildings and trees can be seen behind a wall in the distance. In the lower right-hand corner of the programme is the signature 'E. Hobday'. The programme is almost certainly related to the Punjab Ball, Lahore. It is placed next to the Punjab Ball Menu in the album and the Menu is also illustrated by 'E. Hobday'.

  15. Dependable Design Flow for Protection Systems using Programmable Logic Devices

    CERN Document Server

    Kwiatkowski, M

    2011-01-01

    Programmable Logic Devices (PLD) such as Field Programmable Gate Arrays (FPGA) are becoming more prevalent in protection and safety-related electronic systems. When employing such programmable logic devices, extra care and attention needs to be taken. The final synthesis result, used to generate the bit-stream to program the device, must be shown to meet the design’s requirements. This paper describes how to maximize confidence using techniques such as Formal Methods, exhaustive Hardware Description Language (HDL) code simulation and hardware testing. An example is given for one of the critical functions of the Safe Machine Parameters (SMP) system, used in the protection of the Large Hadron Collider (LHC) at CERN. CERN is also working towards an adaptation of the IEC- 61508 lifecycle designed for Machine Protection Systems (MPS), and the High Energy Physics environment, implementation of a protection function in FPGA code is only one small step of this lifecycle. The ultimate aim of this project is to cre...

  16. A multi-channel scaler designed with programmable logic device

    International Nuclear Information System (INIS)

    Sun Yongjie; Li Cheng; Xing Tao; Zhang Junjie

    2004-01-01

    This scaler used programmable logic device is a design for the electronics of telescope system of the beam. The scaler can scale 30 ECL inputs at the same time. With the EPP (Enhanced Parallel Port) modes of the Parallel Port, the transmitted rate of data is 2 MB/s. This scaler can be used in the position system of MWPC (Multi-Wires Proportional Chamber). Tested with particles of 5 x 10 3 /s, the scaler gives a credible and stable result. (authors)

  17. Design and implementation of SFQ programmable clock generators

    International Nuclear Information System (INIS)

    Ito, M.; Nakajima, N.; Fujiwara, K.; Yoshikawa, N.; Fujimaki, A.; Terai, H.; Yorozu, S.

    2004-01-01

    We have designed and implemented an SFQ programmable clock generator (PCG), which can generate the variable number of SFQ pulses according to its internal state. The PCG is composed of an SFQ ring oscillator, a control circuit which counts up the number of SFQ pulses and stops the operation of the ring oscillator, and a decoder which defines the initial state of the control circuit. The PCG can generate the variable number of SFQ pulses ranging from 2 to 2 N , where N is the number of T flip-flops in the control circuit. The oscillation frequency of the PCG is designed to be ranging from 6.2 to 18.8 GHz. In this study, we have implemented a PCG generating SFQ pulses ranging from 2 to 2 4 using a cell-based design methodology and confirmed its correct functionality

  18. Prior academic background and student performance in assessment in a graduate entry programme.

    Science.gov (United States)

    Craig, P L; Gordon, J J; Clark, R M; Langendyk, V

    2004-11-01

    This study aims to identify whether non-science graduates perform as well as science graduates in Basic and Clinical Sciences (B & CS) assessments during Years 1-3 of a four-year graduate-entry programme at the University of Sydney (the 'USydMP'). Students were grouped into five categories: Health Professions (HP), Biomedical Sciences (BMS), Other Biology (BIOL), Physical Sciences (PHYS) or Non-Science (NONS). We examined the performance rank of students in each of the five groups for single best answer (SBA) and modified essay (MEQ) assessments separately, and also calculated the relative risk of failure in the summative assessments in Years 2 and 3. Students with science-based prior degrees performed better in the SBA assessments. The same occurred initially in the MEQs, but the effect diminished with time. The HP students performed consistently better but converged with other groups over time, particularly in the MEQs. Relative performance by the NONS students improved with time in both assessment formats. Overall, differences between the highest and lowest groups were small and very few students failed to meet the overall standard for the summative assessments. HP and BMS students had the lowest failure rate. NONS students were more likely to fail the assessments in Year 2 and 3, but their pass rates were still high. Female students performed significantly better overall at the end of Year 2 and in Year 3. There were only minor differences between Australian resident and International students. While there are small differences in performance in B & CS early in the programme, these lessen with time. The study results will inform decisions regarding timing of summative assessments, selection policy and for providing additional support to students who need it to minimize their risk of failure. Readers should note that this paper refers to student performance in only one of the four curriculum themes, where health professional and science graduates would be

  19. Price-structure of electricity and district-heating. A background study for energy conservation programme

    International Nuclear Information System (INIS)

    1994-01-01

    The present report deals with the pricing and price-structure of electricity and district-heating with their effects on energy saving. It constitutes part of the groundwork for the new Government Energy Conservation Programme. The report describes principles for the pricing of electricity and district-heating in Finland, and gives some examples of tariffs in foreign countries, which are interesting from the point of view of energy saving. Different utilities apply quite similar pricing principles but there are big differences in price levels between the utilities. The difference in consumer prices can be almost 100 % in the case of electricity and over 150 % as concerns district-heating. The change in retail prices in the last ten years has not had a big general impact on the consumption of electricity or on energy saving. On the other hand, when the price increases of individual utilities are studied, the impact on energy saving at least in the short term can be seen. It seems that an increase of the fixed charges in relation to energy rates has been as a general trend after 1990. To promote energy saving the changing energy rates should be given special emphasis in determining electricity and district-heating tariffs. The opening of the electricity market means that the electricity suppliers face a new situation also when pricing their products. Customers and their expectations will play an increasingly role. (orig.)

  20. Expert validation of fit-for-purpose guidelines for designing programmes of assessment

    Directory of Open Access Journals (Sweden)

    Dijkstra Joost

    2012-04-01

    Full Text Available Abstract Background An assessment programme, a purposeful mix of assessment activities, is necessary to achieve a complete picture of assessee competence. High quality assessment programmes exist, however, design requirements for such programmes are still unclear. We developed guidelines for design based on an earlier developed framework which identified areas to be covered. A fitness-for-purpose approach defining quality was adopted to develop and validate guidelines. Methods First, in a brainstorm, ideas were generated, followed by structured interviews with 9 international assessment experts. Then, guidelines were fine-tuned through analysis of the interviews. Finally, validation was based on expert consensus via member checking. Results In total 72 guidelines were developed and in this paper the most salient guidelines are discussed. The guidelines are related and grouped per layer of the framework. Some guidelines were so generic that these are applicable in any design consideration. These are: the principle of proportionality, rationales should underpin each decisions, and requirement of expertise. Logically, many guidelines focus on practical aspects of assessment. Some guidelines were found to be clear and concrete, others were less straightforward and were phrased more as issues for contemplation. Conclusions The set of guidelines is comprehensive and not bound to a specific context or educational approach. From the fitness-for-purpose principle, guidelines are eclectic, requiring expertise judgement to use them appropriately in different contexts. Further validation studies to test practicality are required.

  1. Programmes design for Bohunice NPP personnel other than control room operators

    International Nuclear Information System (INIS)

    Kalincik, L.

    2002-01-01

    This paper deals with project development of training programmes for non-licenced NPP personnel-masters, field operators, maintenance and technical supporting personnel. The programme development focuses on the part stage and on the job training at NPP. Bohunice NPP belongs to plants with higher specific number of personnel per installed power capacity. This factor also influenced the choice of programmes design. Undermentioned procedure is one of various approaches to SAT exploitation for training programmes design. (author)

  2. System design and verification process for LHC programmable trigger electronics

    CERN Document Server

    Crosetto, D

    1999-01-01

    The rapid evolution of electronics has made it essential to design systems in a technology-independent form that will permit their realization in any future technology. This article describes two practical projects that have been developed for fast, programmable, scalable, modular electronics for the first-level trigger of Large Hadron Collider (LHC) experiments at CERN, Geneva. In both projects, one for the front-end electronics and the second for executing first- level trigger algorithms, the whole system requirements were constrained to two types of replicated components. The overall problem is described, the 3D-Flow design is introduced as a novel solution, and current solutions to the problem are described and compared with the 3D-Flow solution. The design/verification methodology proposed allows the user's real-time system algorithm to be verified down to the gate-level simulation on a technology- independent platform, thus yielding the design for a system that can be implemented with any technology at ...

  3. A Masters Programme in Telecommunications Management--Demand-Based Curriculum Design

    Science.gov (United States)

    Gharaibeh, Khaled M.; Kaylani, Hazem; Murphy, Noel; Brennan, Conor; Itradat, Awni; Al-Bataineh, Mohammed; Aloqlah, Mohammed; Salhieh, Loay; Altarazi, Safwan; Rawashdeh, Nathir; del Carmen Bas Cerdá, María; Conchado Peiró, Andrea; Al-Zoubi, Asem; Harb, Bassam; Bany Salameh, Haythem

    2015-01-01

    This paper presents a curriculum design approach for a Masters Programme in Telecommunications Management based on demand data obtained from surveying the needs of potential students of the proposed programme. Through online surveys disseminated at telecom companies in Jordan, it was possible to measure the demand for such a programme and to…

  4. Enhancing Learning Effectiveness in Digital Design Courses through the Use of Programmable Logic Boards

    Science.gov (United States)

    Zhu, Yi; Weng, T.; Cheng, Chung-Kuan

    2009-01-01

    Incorporating programmable logic devices (PLD) in digital design courses has become increasingly popular. The advantages of using PLDs, such as complex programmable logic devices (CPLDs) and field programmable gate arrays (FPGA), have been discussed before. However, previous studies have focused on the experiences from the point of view of the…

  5. TECHNICAL DESIGN NOTE: Picosecond resolution programmable delay line

    Science.gov (United States)

    Suchenek, Mariusz

    2009-11-01

    The note presents implementation of a programmable delay line for digital signals. The tested circuit has a subnanosecond delay range programmable with a resolution of picoseconds. Implementation of the circuit was based on low-cost components, easily available on the market.

  6. Preparing University Students to Lead K-12 Engineering Outreach Programmes: A Design Experiment

    Science.gov (United States)

    Anthony, Anika B.; Greene, Howard; Post, Paul E.; Parkhurst, Andrew; Zhan, Xi

    2016-01-01

    This paper describes an engineering outreach programme designed to increase the interest of under-represented youth in engineering and to disseminate pre-engineering design challenge materials to K-12 educators and volunteers. Given university students' critical role as facilitators of the outreach programme, researchers conducted a two-year…

  7. Urban design against the background of biosphere and social processes

    Directory of Open Access Journals (Sweden)

    Ivanova Zinaida

    2017-01-01

    Full Text Available In this article, the co-authors tackle the problem of the social sense and mission of the projects developed by urban planners and architects. The co-authors address the key issue of the present-day architectonics, that is, the ability and willingness of urban designers to give consideration to the environment, or the local landscape, to assure the harmonious co-existence of the biosphere and the needs of the society in Smart city. The co-authors compare the spatial organization principles of eastern and western cultures; they also track the patterns of their implementation in the present-day architectonics. The co-authors provide the findings of the public opinion pollabout the urban environment layout. Students of the Moscow State University of Civil Engineering (Russia acted as the respondents. The co-authors employed the findings of the document analysis and the opinion poll to develop recommendations for architects and urban designers in respect of social and ecological needs of urban residents.

  8. Design and implementation of high-precision and low-jitter programmable delay circuitry

    International Nuclear Information System (INIS)

    Gao Yuan; Cui Ke; Zhang Hongfei; Luo Chunli; Yang Dongxu; Liang Hao; Wang Jian

    2011-01-01

    A programmable delay circuit design which has characteristics of high-precision, low-jitter, wide-programmable-range and low power is introduced. The delay circuitry uses the scheme which has two parts: the coarse delay and the fine delay that could be controlled separately. Using different coarse delay chip can reach different maximum programmable range. And the fine delay programmable chip has the minimum step which is down to 10 ps. The whole circuitry jitter will be less than 100 ps. The design has been successfully applied in Quantum Key Distribution experiment. (authors)

  9. Evaluating disease management programme effectiveness: an introduction to the regression discontinuity design.

    Science.gov (United States)

    Linden, Ariel; Adams, John L; Roberts, Nancy

    2006-04-01

    Although disease management (DM) has been in existence for over a decade, there is still much uncertainty as to its effectiveness in improving health status and reducing medical cost. The main reason is that most programme evaluations typically follow weak observational study designs that are subject to bias, most notably selection bias and regression to the mean. The regression discontinuity (RD) design may be the best alternative to randomized studies for evaluating DM programme effectiveness. The most crucial element of the RD design is its use of a 'cut-off' score on a pre-test measure to determine assignment to intervention or control. A valuable feature of this technique is that the pre-test measure does not have to be the same as the outcome measure, thus maximizing the programme's ability to use research-based practice guidelines, survey instruments and other tools to identify those individuals in greatest need of the programme intervention. Similarly, the cut-off score can be based on clinical understanding of the disease process, empirically derived, or resource-based. In the RD design, programme effectiveness is determined by a change in the pre-post relationship at the cut-off point. While the RD design is uniquely suitable for DM programme evaluation, its success will depend, in large part, on fundamental changes being made in the way DM programmes identify and assign individuals to the programme intervention.

  10. Do Computerised Training Programmes Designed to Improve Working Memory Work?

    Science.gov (United States)

    Apter, Brian J. B.

    2012-01-01

    A critical review of working memory training research during the last 10 years is provided. Particular attention is given to research that has attempted to investigate the efficacy of commercially marketed computerised training programmes such as "Cogmed" and "Jungle Memory". Claimed benefits are questioned on the basis that research methodologies…

  11. Designing a benthic monitoring programme with multiple conflicting objectives

    NARCIS (Netherlands)

    Bijleveld, A.I.; van Gils, J.A.; van der Meer, J.; Dekinga, A.; Kraan, C.; van der Veer, H.W.; Piersma, T.

    2012-01-01

    1. Sound conservation and management advice usually requires spatial data on animal and plant abundances. The expense of programmes to determine species distributions and estimates of population sizes often limits sample size. To maximise effectiveness at minimal costs, optimisations of such

  12. DESIGN AND REALIZATION OF A MULTI-EPROM PROGRAMMER

    African Journals Online (AJOL)

    The special features of this programmer are: (a) the number of hardware components is small;. (b) it supports the standard SOms pulse and other intelligent program.ming algorithms;. (c) it uses a single EPROM socket for different. EPROMs;. (d) it does not require any additional interface card and can be used with any ...

  13. CO{sub 2}MPARE. CO2 Model for Operational Programme Assessment in EU Regions. Technical background and guidance for deployment in EU regions

    Energy Technology Data Exchange (ETDEWEB)

    Hekkenberg, M. [ECN Policy Studies, Amsterdam (Netherlands); Le Pierres, S. [Energies Demain, Montreuil Sous Bois (France); Del Ciello, R. [Italian National Agency for New Technologies, Energy and Sustainable Economic Development ENEA, Rome (Italy); Keppo, I. [University College London UCL, London (United Kingdom); Papagianni, S. [Centre for Renewable Energy Sources and Saving CRES, Pikermi Attiki (Greece); Harnych, J. [ENVIROS, Prague (Czech Republic)

    2013-03-15

    The CO2MPARE model enables national and regional authorities to assess the carbon impacts of Operational Programmes co-financed through the European Regional Development Fund (ERDF). This document provides technical background information and guidance for deploying the model in additional EU regions.

  14. Natural hazards education in global environment leaders education programme for designing a low-carbon society

    Science.gov (United States)

    Lee, Han Soo; Yamashita, Takao; Fujiwara, Akimasa

    2010-05-01

    domain numerical models that are combined synchronously by an own-developed model coupler. Therefore, RES can provide detailed insights from various aspects of interaction processes between each component in the earth system. For instance, RES has been used for the study of storm surges and the abnormally high ocean waves caused by typhoons, cyclones, hurricanes, and winter monsoon winds in Asian region; dam lake circulation; air-sea interaction of momentum, heat, and tracer material exchange; heavy rainfall and runoff simulation; estuarine circulation with cohesive sediment transport; and wave overtopping in coastal regions. Most recently, a project on the impact of reduced discharge of freshwater and sediment from the Yangtze River basin on the adjacent East China Sea has been initiated by using the RES. Under the GEL programme, we found the RES can be an important and useful tool for graduate students not only from science and engineering background but also from social science so as to evaluate their policy and institutional design.

  15. Design of a Tritium-in-air-monitor using field programmable gate arrays

    International Nuclear Information System (INIS)

    McNelles, Phillip; Lu, Lixuan

    2015-01-01

    Field Programmable Gate Arrays (FPGAs) have recently garnered significant interest for certain applications within the nuclear field. Some applications of these devices include Instrumentation and Control (I and C) systems, pulse measurement systems, particle detectors and health physics purposes. In CANada Deuterium Uranium (CANDU) nuclear power plants, the use of heavy water (D2O) as the moderator leads to the increased production of Tritium, which poses a health risk and must be monitored by Tritium-In-Air Monitors (TAMs). Traditional TAMs are mostly designed using microprocessors. More recent studies show that FPGAs could be a potential alternative to implement the electronic logic used in radiation detectors, such as the TAM, more effectively. In this paper, an FPGA-based TAM is designed and constructed in a laboratory setting using an FPGA-based cRIO system. New functionalities, such as the detection of Carbon-14 and the addition of noble gas compensation are incorporated into a new FPGA-based TAM. Additionally, all of the standard functions included in the original microprocessor-based TAM, such as tritium detection, gamma compensation, pump and air flow control, and background and thermal drift corrections were also implemented. The effectiveness of the new design is demonstrated through simulations as well as laboratory testing on the prototype system. (author)

  16. Evaluation of a standard provision versus an autonomy promotive exercise referral programme: rationale and study design

    Directory of Open Access Journals (Sweden)

    Jolly Kate

    2009-06-01

    Full Text Available Abstract Background The National Institute of Clinical Excellence in the UK has recommended that the effectiveness of ongoing exercise referral schemes to promote physical activity should be examined in research trials. Recent empirical evidence in health care and physical activity promotion contexts provides a foundation for testing the utility of a Self Determination Theory (SDT-based exercise referral consultation. Methods/Design Design: An exploratory cluster randomised controlled trial comparing standard provision exercise on prescription with a Self Determination Theory-based (SDT exercise on prescription intervention. Participants: 347 people referred to the Birmingham Exercise on Prescription scheme between November 2007 and July 2008. The 13 exercise on prescription sites in Birmingham were randomised to current practice (n = 7 or to the SDT-based intervention (n = 6. Outcomes measured at 3 and 6-months: Minutes of moderate or vigorous physical activity per week assessed using the 7-day Physical Activity Recall; physical health: blood pressure and weight; health status measured using the Dartmouth CO-OP charts; anxiety and depression measured by the Hospital Anxiety and Depression Scale and vitality measured by the subjective vitality score; motivation and processes of change: perceptions of autonomy support from the advisor, satisfaction of the needs for competence, autonomy, and relatedness via physical activity, and motivational regulations for exercise. Discussion This trial will determine whether an exercise referral programme based on Self Determination Theory increases physical activity and other health outcomes compared to a standard programme and will test the underlying SDT-based process model (perceived autonomy support, need satisfaction, motivation regulations, outcomes via structural equation modelling. Trial registration The trial is registered as Current Controlled trials ISRCTN07682833.

  17. A Project-Based Learning Approach to Programmable Logic Design and Computer Architecture

    Science.gov (United States)

    Kellett, C. M.

    2012-01-01

    This paper describes a course in programmable logic design and computer architecture as it is taught at the University of Newcastle, Australia. The course is designed around a major design project and has two supplemental assessment tasks that are also described. The context of the Computer Engineering degree program within which the course is…

  18. Feasibility of including patients with migration background in a structured heart failure management programme: A prospective case-control study exemplarily on Turkish migrants.

    Directory of Open Access Journals (Sweden)

    Roman Pfister

    Full Text Available Structured management programmes deliver optimized care in heart failure patients and improve outcome. We examined the feasibility of including patients with migration background speaking little or no German in a heart failure management programme.After adaption of script material and staff to Turkish language we aimed to recruit 300 Turkish and 300 German (control group patients within 18 months using the operational basis of a local heart failure management programme for screening, contact and inclusion. Of 488 and 1,055 eligible Turkish and German patients identified through screening, 165 Turkish (34% and 335 German (32% patients consented on participation (p = 0.46. General practitioners contributed significantly more of the Turkish (84% than of the German patients (16%, p<0.001. Contact attempts by programme staff were significantly less successful in Turkish (52% than in German patients (60%, p = 0.005 due to significantly higher rate of missing phone numbers (36% vs 25%, invalid address data (28% vs 7% and being unreachable by phone more frequently (39% vs 26%, all p<0.001. Consent rate was significantly higher in successfully contacted Turkish (63% compared to German patients (50%, p<0.001.The inclusion of Turkish minority patients into a heart failure management programme is feasible with higher consent rate than in Germans. However, effort is high due to inherent logistic adaptions and barriers in identification and contacting of patients.DRKS00007780.

  19. Programmable logic controller performance enhancement by field programmable gate array based design.

    Science.gov (United States)

    Patel, Dhruv; Bhatt, Jignesh; Trivedi, Sanjay

    2015-01-01

    PLC, the core element of modern automation systems, due to serial execution, exhibits limitations like slow speed and poor scan time. Improved PLC design using FPGA has been proposed based on parallel execution mechanism for enhancement of performance and flexibility. Modelsim as simulation platform and VHDL used to translate, integrate and implement the logic circuit in FPGA. Xilinx's Spartan kit for implementation-testing and VB has been used for GUI development. Salient merits of the design include cost-effectiveness, miniaturization, user-friendliness, simplicity, along with lower power consumption, smaller scan time and higher speed. Various functionalities and applications like typical PLC and industrial alarm annunciator have been developed and successfully tested. Results of simulation, design and implementation have been reported. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

  20. Design and applications of an anticoincidence shielded low background gamma-ray spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Petri, H [Forschungszentrum Juelich GmbH (Germany). Zentralabteilung fuer Chemische Analysen

    1997-03-01

    A low background gamma-ray spectrometer has been constructed for measuring artificial and natural radioative isotopes. The design of the spectrometer, its properties and the application to the determination of natural radioactivity of dental ceramics are described. (orig.)

  1. Design lessons from using programmable controllers in the MFTF-B personnel safety and interlocks system

    International Nuclear Information System (INIS)

    Branum, J.D.

    1983-01-01

    Applying programmable controllers in critical applications such as personnel safety and interlocks systems requires special considerations in the design of both hardware and software. All modern programmable controller systems feature extensive internal diagnostic capabilities to protect against problems such as program memory errors; however most, if not all present designs lack an intrinsic capability for detecting and countering failures on the field-side of their I/O modules. Many of the most common styles of I/O modules can also introduce potentially dangerous sneak circuits, even without component failure. This paper presents the most significant lessons learned to date in the design of the MFTF-B Personnel Safety and Interlocks System, which utilizes two non-redundant programmable controllers with over 800 I/O points each. Specific problems recognized during the design process as well as those discovered during initial testing and operation are discussed along with their specific solutions in hardware and software

  2. Multinational design evaluation programme. Annual Report April 2016-April 2017

    International Nuclear Information System (INIS)

    2017-08-01

    The Multinational Design Evaluation Program (MDEP) is a multinational initiative to leverage the resources and knowledge of national regulatory authorities that are currently, or will shortly be, undertaking the review of new reactor power plant designs. MDEP was launched in 2006. In the past ten years, MDEP's reputation as an effective organisation for leveraging the resources and experiences of multiple nations in the regulatory review of new reactors has grown significantly. As a result, the portfolio of new reactor designs that are being addressed have increased from two in 2006 to five in 2017, with a possibility of adding more new reactor designs in the coming years. MDEP's membership has grown from the original 10 national regulators to 15. Over the past year, MDEP design specific working groups have all completed their common positions to address the impact of the Fukushima Daiichi nuclear power plant accident on new reactor designs. New reactor commissioning activities are a major part of all design specific working groups. The EPR and AP1000 Working Groups are particularly active in this area, as together they are overseeing 12 new reactor constructions worldwide. The design specific working groups have finalised a common position to provide high-level guidance to applicants and licensees that wish to take credit for a first plant only test (FPOT). This common position was first implemented in March 2017 at the Taishan 1 plant in China, where regulators and licensees from the United Kingdom, France and Finland witnessed reactor pressure vessel internals vibration tests. The FPOT marked a significant milestone for MDEP since it provided a unique opportunity for regulators involved to demonstrate the efficiency of using common positions to effectively collaborate and share information on test results. This model should be followed as much as possible in other MDEP co-operation areas. Another significant step in multinational regulatory co

  3. A pressure ulcer prevention programme specially designed for nursing homes: does it work?

    Science.gov (United States)

    Kwong, Enid W-Y; Lau, Ada T-Y; Lee, Rainbow L-P; Kwan, Rick Y-C

    2011-10-01

    The aim of this study was to evaluate a pressure ulcer prevention programme for nursing homes to ascertain the feasibility of its implementation, impact on care staff and outcomes for pressure ulcer knowledge and skills and pressure ulcer reduction. No pressure ulcer prevention protocol for long-term care settings has been established to date. The first author of this study thus developed a pressure ulcer prevention programme for nursing homes. A quasi-experimental pretest and post-test design was adopted. Forty-one non-licensed care providers and eleven nurses from a government-subsidised nursing home voluntarily participated in the study. Knowledge and skills of the non-licensed care providers were assessed before, immediately after and six weeks after the training course, and pressure ulcer prevalence and incidence were recorded before and during the protocol implementation. At the end of the programme implementation, focus group interviews with the subjects were conducted to explore their views on the programme. A statistically significant improvement in knowledge and skills scores amongst non-licensed care providers was noted. Pressure ulcer prevalence and incidence rates dropped from 9-2·5% and 2·5-0·8%, respectively, after programme implementation. The focus group findings indicated that the programme enhanced the motivation of non-licensed care providers to improve their performance of pressure ulcer prevention care and increased communication and cooperation amongst care staff, but use of the modified Braden scale was considered by nurses to increase their workload. A pressure ulcer prevention programme for nursing homes, which was feasible and acceptable, with positive impact and outcome in a nursing home was empirically developed. The study findings can be employed to modify the programme and its outcomes for an evaluation of effectiveness of the programme through a randomised controlled trial. © 2011 Blackwell Publishing Ltd.

  4. Adaption of the radiation dose for computed tomography of the body - back-ground for the dose adaption programme OmnimAs

    International Nuclear Information System (INIS)

    Nyman, Ulf; Kristiansson, Mattias; Leitz, Wolfram; Paahlstorp, Per-Aake

    2004-11-01

    When performing computed tomography examinations the exposure factors are hardly ever adapted to the patient's size. One reason for that might be the lack of simple methods. In this report the computer programme OmnimAs is described which is calculating how the exposure factors should be varied together with the patient's perimeter (which easily can be measured with a measuring tape). The first approximation is to calculate the exposure values giving the same noise levels in the image irrespective the patient's size. A clinical evaluation has shown that this relationship has to be modified. One chapter is describing the physical background behind the programme. Results calculated with OmnimAs are in good agreement with a number of published studies. Clinical experiences are showing the usability of OmnimAs. Finally the correlation between several parameters and image quality/dose is discussed and how this correlation can be made use of for optimising CT-examinations

  5. Impact of early applied upper limb stimulation: The EXPLICIT-stroke programme design

    Directory of Open Access Journals (Sweden)

    Lindeman Eline

    2008-12-01

    Full Text Available Abstract Background Main claims of the literature are that functional recovery of the paretic upper limb is mainly defined within the first month post stroke and that rehabilitation services should preferably be applied intensively and in a task-oriented way within this particular time window. EXplaining PLastICITy after stroke (acronym EXPLICIT-stroke aims to explore the underlying mechanisms of post stroke upper limb recovery. Two randomized single blinded trials form the core of the programme, investigating the effects of early modified Constraint-Induced Movement Therapy (modified CIMT and EMG-triggered Neuro-Muscular Stimulation (EMG-NMS in patients with respectively a favourable or poor probability for recovery of dexterity. Methods/design 180 participants suffering from an acute, first-ever ischemic stroke will be recruited. Functional prognosis at the end of the first week post stroke is used to stratify patient into a poor prognosis group for upper limb recovery (N = 120, A2 project and a group with a favourable prognosis (N = 60, A1 project. Both groups will be randomized to an experimental arm receiving respectively modified CIMT (favourable prognosis or EMG-NMS (poor prognosis for 3 weeks or to a control arm receiving usual care. Primary outcome variable will be the Action Research Arm Test (ARAT, assessed at 1,2,3,4,5, 8, 12 and 26 weeks post stroke. To study the impact of modified CIMT or EMG-NMS on stroke recovery mechanisms i.e. neuroplasticity, compensatory movements and upper limb neuromechanics, 60 patients randomly selected from projects A1 and A2 will undergo TMS, kinematical and haptic robotic measurements within a repeated measurement design. Additionally, 30 patients from the A1 project will undergo fMRI at baseline, 5 and 26 weeks post stroke. Conclusion EXPLICIT stroke is a 5 year translational research programme which main aim is to investigate the effects of early applied intensive intervention for regaining dexterity

  6. Designing a Community-Based Dance Programme for North Korean Female Refugees in South Korea

    Science.gov (United States)

    Na, Kyung-Ah; Park, Hyun-Jung; Han, Seok Jin

    2016-01-01

    In this paper, we propose a community-based dance programme designed for North Korean female defectors in South Korea, with the aim of promoting their physical, psychological, and interpersonal aspects. We set up four research objectives: to look into social contexts of North Korean female refugees in South Korea, to identify the women's desire…

  7. The dynamic flowgraph methodology as a safety analysis tool : programmable electronic system design and verification

    NARCIS (Netherlands)

    Houtermans, M.J.M.; Apostolakis, G.E.; Brombacher, A.C.; Karydas, D.M.

    2002-01-01

    The objective of this paper is to demonstrate the use of the Dynamic Flowgraph Methodology (DFM) during the design and verification of programmable electronic safety-related systems. The safety system consists of hardware as well as software. This paper explains and demonstrates the use of DFM, and

  8. Elements for designing ALARA programmes for the maintenance and routine operations of nuclear facilities

    International Nuclear Information System (INIS)

    Lefaure, C.; Croft, J.R.

    1991-01-01

    This article briefly reviews the three fundamental elements for designing ALARA programmes for the maintenance and routine operations of nuclear facilities. These are the need for commitment of all parties involved, the need for specific ALARA organizational structures and the systematic use of ALARA tools. (UK)

  9. Supporting Pre-Service Teachers' Technology-Enabled Learning Design Thinking through Whole of Programme Transformation

    Science.gov (United States)

    Bower, Matt; Highfield, Kate; Furney, Pam; Mowbray, Lee

    2013-01-01

    This paper explains a development and evaluation project aimed at transforming two pre-service teacher education programmes at Macquarie University to more effectively cultivate students' technology-enabled learning design thinking. The process of transformation was based upon an explicit and sustained focus on developing university academics'…

  10. A framework for designing a research-based “maths counsellor” teacher programme

    DEFF Research Database (Denmark)

    Jankvist, Uffe Thomas; Niss, Mogens

    2015-01-01

    force” of so-called “maths counsellors”, i.e., mathematics teachers whose goal it is to help identify students with genuine learning difficulties in mathematics, investigate the nature of these difficulties, and carry out research-based interventions to assist the students in overcoming them. We present...... and discuss the various components of the programme, theoretical as well as practical, and account for how these make up a framework for designing a research-based “maths counsellor” teacher programme...

  11. ACINO: Report on the design of programmability elements for in-operation network control

    OpenAIRE

    Sköldström Pontus; Junique Stéphane; Marsico Antonio

    2017-01-01

    This ACINO deliverable presents the work performed in task “Design of the programmability elements for in-operation network control” to design the northbound interface of the ACINO orchestrator. The document begins with a review of the requirements of the northbound interface, derived from previous work done related to use cases and application requirements and the expected properties of the ACINO framework (see report "ACINO: The framework for the application-centric network orchestra...

  12. Electromagnetic Design of Feedhorn-Coupled Transition-Edge Sensors for Cosmic Microwave Background Polarimetery

    Science.gov (United States)

    Chuss, David T.

    2011-01-01

    Observations of the cosmic microwave background (CMB) provide a powerful tool for probing the evolution of the early universe. Specifically, precision measurement of the polarization of the CMB enables a direct test for cosmic inflation. A key technological element on the path to the measurement of this faint signal is the capability to produce large format arrays of background-limited detectors. We describe the electromagnetic design of feedhorn-coupled, TES-based sensors. Each linear orthogonal polarization from the feed horn is coupled to a superconducting microstrip line via a symmetric planar orthomode transducer (OMT). The symmetric OMT design allows for highly-symmetric beams with low cross-polarization over a wide bandwidth. In addition, this architecture enables a single microstrip filter to define the passband for each polarization. Care has been taken in the design to eliminate stray coupling paths to the absorbers. These detectors will be fielded in the Cosmology Large Angular Scale Surveyor (CLASS).

  13. Global engineering teams - a programme promoting teamwork in engineering design and manufacturing

    Science.gov (United States)

    Oladiran, M. T.; Uziak, J.; Eisenberg, M.; Scheffer, C.

    2011-05-01

    Engineering graduates are expected to possess various competencies categorised into hard and soft skills. The hard skills are acquired through specific coursework, but the soft skills are often treated perfunctorily. Global Engineering Teams (GET) is a programme that promotes project-oriented tasks in virtual student teams working in collaboration with industry partners. Teamwork is a major success factor for GET as students always work in groups of varying sizes. A questionnaire-based survey of the 2008 cohort of GET students was conducted to assess teamwork, communication and conflict resolution among group members. The results confirmed that deliverables are readily achieved in teams and communication was open. A challenge of using virtual teams is the availability of high-speed Internet access. The GET programme shows that it is possible to deliver engineering design and manufacturing via industry/university collaboration. The programme also facilitates multidisciplinary teamwork at an international level.

  14. Technology-Enhanced Physics Programme for Community-Based Science Learning: Innovative Design and Programme Evaluation in a Theme Park

    Science.gov (United States)

    Tho, Siew Wei; Chan, Ka Wing; Yeung, Yau Yuen

    2015-01-01

    In this study, a new physics education programme is specifically developed for a famous theme park in Hong Kong to provide community-based science learning to her visitors, involving her three newly constructed rides. We make innovative use of digital technologies in this programme and incorporate a rigorous evaluation of the learning…

  15. Note On Research Design For The Study Of Community Participation In Health Care Programmes

    Directory of Open Access Journals (Sweden)

    Rifkin Susan B

    1986-01-01

    Full Text Available After describing types of research designs for the study of community participation in health care programmes, this paper examines one methodology, the quantitative methodology, the quantitative methodology, in detail. It presents some of the major attractions and limitations of this approach. The attractions include the need for evaluation of success and failure and of cost effectiveness of programmes. The limitations include the inability of the approach to deal with definitions and interventions that cannot be quantitified and the difficulty of identifying casual relationship between interventions and outcomes. These characteristics are illustrated by a case by a medical school in Asia. Research design, research developments and research outcomes are described and analysed. The paper concludes that an alternative analysis which examines the linkages between participation and health improvements would be more useful as it would allow the political, social and economic dimensions of community participation to be examined.

  16. Using a Voltage Domain Programmable Technique for Low-Power Management Cell-Based Design

    Directory of Open Access Journals (Sweden)

    Ching-Hwa Cheng

    2011-09-01

    Full Text Available The Multi-voltage technique is an effective way to reduce power consumption. In the proposed cell-based voltage domain programmable (VDP technique, the high and low voltages applied to logic gates are programmable. The flexible voltage domain reassignment allows the chip performance and power consumption to be dynamically adjusted. In the proposed technique, the power switches possess the feature of flexible programming after chip manufacturing. This VDP method does not use an external voltage regulator to regulate the supply voltage level from outside of the chip but can be easily integrated within the design. This novel technique is proven by use of a video decoder test chip, which shows 55% and 61% power reductions compared to conventional single-Vdd and low-voltage designs, respectively. This power-aware performance adjusting mechanism shows great power reduction with a good power-performance management mechanism.

  17. Worksite interventions for preventing physical deterioration among employees in job-groups with high physical work demands: background, design and conceptual model of FINALE

    DEFF Research Database (Denmark)

    Holtermann, Andreas; Jørgensen, Marie B; Gram, Bibi

    2010-01-01

    physical demands remains to be established. This paper describes the background, design and conceptual model of the FINALE programme, a framework for health promoting interventions at 4 Danish job groups (i.e. cleaners, health-care workers, construction workers and industrial workers) characterized by high......A mismatch between individual physical capacities and physical work demands enhance the risk for musculoskeletal disorders, poor work ability and sickness absence, termed physical deterioration. However, effective intervention strategies for preventing physical deterioration in job groups with high...... physical work demands, musculoskeletal disorders, poor work ability and sickness absence....

  18. The design of programme-controlled gain and linear pulse amplifier

    International Nuclear Information System (INIS)

    Guan Xuemei; Chen Chunkai; Northeast Normal Univ., Changchun; Qiao Shuang; Zhou Chuansheng

    2006-01-01

    The authors have designed a kind of new-style programme-controlled gain and linear pulse amplifier with accurate gausses of CR-RC-CR shaping circuit structure. The use of non-volatile digital electric potential device and accurate operational amplifier makes the circuit structure simple greatly, makes the ability stronger that resists assault. It can realize multistage gain in succession and make the drift of temperature low and make the linearity of pulse well. (authors)

  19. Design and implementation of a radiotherapy programme: Clinical, medical physics, radiation protection and safety aspects

    International Nuclear Information System (INIS)

    1998-09-01

    It is widely acknowledged that the clinical aspects (diagnosis, decision, indication for treatment, follow-up) as well as the procedures related to the physical and technical aspects of patient treatment must be subjected to careful control and planning in order to ensure safe, high quality radiotherapy. Whilst it has long been recognized that the physical aspects of quality assurance in radiotherapy are vital to achieve and effective and safe treatment, it has been increasingly acknowledged only recently that a systematic approach is absolutely necessary to all steps within clinical and technical aspects of a radiotherapy programme as well. The need to establish general guidelines at the IAEA, taking into account clinical medical physics, radiation protection and safety considerations, for designing and implementing radiotherapy programmes in Member States has been identified through the Member States' increased interest in the efficient and safe application of radiation in health care. Several consultants and advisory group meetings were convened to prepare a report providing a basis for establishing a programme in radiotherapy. The present TECDOC is addressed to all professionals and administrators involved in the development, implementation and management of a radiotherapy programme in order to establish a common and consistent framework where all steps and procedures in radiotherapy are taken into account

  20. Meeting the physics design challenges of modern LWRs being inducted into the Indian nuclear power programme

    International Nuclear Information System (INIS)

    Jagannathan, V.; Pal, Usha; Karthikeyan, R.; Raj, Devesh; Srivastava, Argala; Khan, Suhail Ahmad

    2007-01-01

    Indian nuclear power programme started with the two Boiling Water Reactors (BWR) of 210 MWe capacity at Tarapur. Two VVER-1000 MWe reactors which are Pressurized Water Reactors (PWR) of Russian design are being constructed at Kudankulam, Tamilnadu and are expected to be commissioned by end 2008. There may be also a possibility of inducting some western PWRs in future. These reactors belong to the category of light water reactors (LWR). The LWRs are compact and have complex physical characteristics distinctly different from those of the Pressurized Heavy Water Reactors (PHWR) which, currently form the mainstay of our indigenous nuclear power programme. The physics design and analysis capability for the modern LWRs (BWR, PWR and VVER) has been developed at Light Water Reactors Physics Section, BARC. This paper presents the current state of art in this key technology area to meet the physics design and operation challenges when LWRs would be inducted in a major way into the Indian nuclear power programme and commence operating in the coming decades. (author)

  1. Note: The design of thin gap chamber simulation signal source based on field programmable gate array

    International Nuclear Information System (INIS)

    Hu, Kun; Wang, Xu; Li, Feng; Jin, Ge; Lu, Houbing; Liang, Futian

    2015-01-01

    The Thin Gap Chamber (TGC) is an important part of ATLAS detector and LHC accelerator. Targeting the feature of the output signal of TGC detector, we have designed a simulation signal source. The core of the design is based on field programmable gate array, randomly outputting 256-channel simulation signals. The signal is generated by true random number generator. The source of randomness originates from the timing jitter in ring oscillators. The experimental results show that the random number is uniform in histogram, and the whole system has high reliability

  2. Designing and Evaluating a Professional Development Programme for Basic Technology Integration in English as a Foreign Language (EFL) Classrooms

    Science.gov (United States)

    Ansyari, Muhammad Fauzan

    2015-01-01

    This study aims to develop and evaluate a professional development programme for technology integration in an Indonesian university's English language teaching setting. The study explored the characteristics of this programme to English lecturers' technological pedagogical content knowledge (TPCK) development. This design-based research employed…

  3. Some aspects of design and analysis of selection programmes in aquaculture species.

    Science.gov (United States)

    Li, Y; Ponzoni, R W

    2015-04-01

    The aquaculture industry is one of the fastest growing animal food-producing sectors in the world, largely driven by an increasing demand for high-quality protein from developing countries. However, the majority of cultured production of aquatic species currently relies heavily on the collection of wild animals for use as broodstock. Aquatic animal domestication and genetic selection programmes in controlled environments are essential to enable the provision of a continued supply of high-quality food for an ever-expanding world population. Professor John James' significant contributions to the genetic improvement of conventional livestock species are well known. By contrast, his contributions to the aquaculture industry are less well known, especially in the areas of design and conduct of selective breeding programmes in aquatic animal species. In this study, we focus on a few aspects of aquaculture genetics to which Professor James made substantial contributions. His outstanding ability to comprehend, clarify and simplify complex problems with easy-to-understand mathematical derivations is clearly demonstrated in the areas of large-scale strain comparisons, genotype-by-environment interactions (GxE), transformations and interpretation of selection response, as well as in the treatment of economic aspects of designing breeding programmes. © 2015 Blackwell Verlag GmbH.

  4. Evaluation of European Domestic Violence Perpetrator Programmes: Toward a Model for Designing and Reporting Evaluations Related to Perpetrator Treatment Interventions.

    Science.gov (United States)

    Lilley-Walker, Sarah-Jane; Hester, Marianne; Turner, William

    2018-03-01

    This article is based on a review of 60 evaluations (published and unpublished) relating to European domestic violence perpetrator programmes, involving 7,212 programme participants across 12 countries. The purpose of the review, part of the "IMPACT: Evaluation of European Perpetrator Programmes" project funded by the European Commission (Daphne III Programme), was to provide detailed knowledge about the range of European evaluation studies with particular emphasis on the design, methods, input, output, and outcome measures used in order to identify the possibilities and challenges of a multicountry, Europe-wide evaluation methodology that could be used to assess perpetrator programmes in the future. We provide a model to standardise the reporting of evaluation studies and to ensure attention is paid to what information is being collected at different time points so as to understand what and how the behaviour and attitudes of perpetrators might change throughout the course of the programme.

  5. Rationale, design, and results of the first screening round of a comprehensive, register-based, Chlamydia screening implementation programme in the Netherlands

    Directory of Open Access Journals (Sweden)

    Koekenbier Rik H

    2010-10-01

    Full Text Available Abstract Background Implementing Chlamydia trachomatis screening in the Netherlands has been a point of debate for several years. The National Health Council advised against implementing nationwide screening until additional data collected from a pilot project in 2003 suggested that screening by risk profiles could be effective. A continuous increase in infections recorded in the national surveillance database affirmed the need for a more active approach. Here, we describe the rationale, design, and implementation of a Chlamydia screening demonstration programme. Methods A systematic, selective, internet-based Chlamydia screening programme started in April 2008. Letters are sent annually to all 16 to 29-year-old residents of Amsterdam, Rotterdam, and selected municipalities of South Limburg. The letters invite sexually active persons to login to http://www.chlamydiatest.nl with a personal code and to request a test kit. In the lower prevalence area of South Limburg, test kits can only be requested if the internet-based risk assessment exceeds a predefined value. Results We sent invitations to 261,025 people in the first round. One-fifth of the invitees requested a test kit, of whom 80% sent in a sample for testing. The overall positivity rate was 4.2%. Conclusions This programme advances Chlamydia control activities in the Netherlands. Insight into the feasibility, effectiveness, cost-effectiveness, and impact of this large-scale screening programme will determine whether the programme will be implemented nationally.

  6. The design of nuclear magnetic resonance programmable pulsed source based SOPC

    International Nuclear Information System (INIS)

    Zhang Qingshun; Zhang Yakun; Wang Wenli

    2012-01-01

    The design of pulse source in the equipment of pulsed Nuclear Magnetic Resonance is studied based on SOPC. The strong processing power of Nios Ⅱ embedded processor and the design flexibility of FPGA are fully used. The SOPC system is built. The overall design plan for the pulse source is described. The design of programmable multi-pulse generation logic user-defined components in the FPGA is introduced mainly. Part of the implementation program and the task logic simulation waveforms are presented. The pulse source has better application value because a clear, stable and good quality multi-pulse output waveform can be shown on the oscilloscope finally. The system software and hardware are easy to be modified and upgraded, meeting different application of pulsed NMR pulse sequence in variety of requirements. (authors)

  7. Design of readout drivers for ATLAS pixel detectors using field programmable gate arrays

    CERN Document Server

    Sivasubramaniyan, Sriram

    Microstrip detectors are an integral patt of high energy physics research . Special protocols are used to transmit the data from these detectors . To readout the data from such detectors specialized instrumentation have to be designed . To achieve this task, creative and innovative high speed algorithms were designed simulated and implemented in Field Programmable gate arrays, using CAD/CAE tools. The simulation results indicated that these algorithms would be able to perform all the required tasks quickly and efficiently. This thesis describes the design of data acquisition system called the Readout Drivers (ROD) . It focuses on the ROD data path for ATLAS Pixel detectors. The data path will be an integrated part of Readout Drivers setup to decode the data from the silicon micro strip detectors and pixel detectors. This research also includes the design of Readout Driver controller. This Module is used to control the operation of the ROD. This module is responsible for the operation of the Pixel decoders bas...

  8. Designing Programme Implementation Strategies to Increase the Adoption and Use of Biosand Water Filters in Rural India

    OpenAIRE

    Tommy K.K. Ngai; Richard A. Fenner

    2014-01-01

    Low-cost household water treatment systems are innovations designed to improve the quality of drinking water at the point of use. This study investigates how an NGO can design appropriate programme strategies in order to increase the adoption and sustained use of household sand filters in rural India. A system dynamics computer model was developed and used to assess 18 potential programme strategies for their effectiveness in increasing filter use at two and ten years into the future, under s...

  9. Elements for Designing Stakeholders’ Programmes of Encouraging Young People to Engage in Entrepreneurship

    Directory of Open Access Journals (Sweden)

    Jasmina Omerbegović-Bijelović

    2016-04-01

    Full Text Available This paper proposes a way to help in solving the high levels of unemployment amongst the young (in Serbia – by designing and realising stakeholders’ programmes which would allow inclusion of the young in the entrepreneurial world (through either self-employment or employment of others. The idea is to identify and recommend to stakeholders the competencies and motives that drive the nowadays young entrepreneurs – as models for enabling and motivating unemployed youth to engage into the entrepreneurial world. On the basis of facts obtained by research – which pinpoint the competencies - both practical and theoretical, on the basis of the motives of the young entrepreneurs in Serbia, as well as on the basis of their beliefs/attitudes about the same aspects of starting and undertaking entrepreneurial projects, some recommendations for stakeholders have been generated for designing a programme to encourage those young people to join the ranks of entrepreneurs. What remains is for the relevant authorities - in the legal and even family settings, i.e., all those who can recognise some self-interest, is to get started and dedicate themselves to the young and their entry into the world of entrepreneurship. The contribution of this paper is in the suggestions for the different types of stakeholders which would help them design programmes to bring the young generations into the entrepreneurial sphere. We also consider even the very fact of pointing out the different roles of the varied social subjects/stakeholders to be useful in bringing the younger generations into the world of entrepreneurship, as a form of care for the young generations.

  10. Moving beyond a "Bums-on-Seats" Analysis of Progress towards Widening Participation: Reflections on the Context, Design and Evaluation of an Australian Government-Funded Mentoring Programme

    Science.gov (United States)

    Lynch, Julianne; Walker-Gibbs, Bernadette; Herbert, Sandra

    2015-01-01

    In 2010, the Australian government established the Higher Education Participation and Partnerships Programme--a funding agenda to promote programmes that respond to the under-representation in higher education of people from low socioeconomic status (SES) backgrounds. Many government-funded programmes and projects have since emerged that respond…

  11. A learning design methodology for developing short learning programmes in further and continuing education

    DEFF Research Database (Denmark)

    Buus, Lillian; Georgsen, Marianne

    2017-01-01

    Over the past 5 years, teaching staff at the School of Continuing Education, VIA University College, Denmark, has been designing digitally supported teaching within diploma programmes and tailor-made courses in the fields of health, education, social sciences and management. More and more...... throughout the course or program; a higher degree of exposure as the teacher often becomes the sole point of contact in online environments; communication skills needed to facilitate dialogue and collaboration in an online environment; etc. Furthermore, involvement of teaching staff in co-creation of new...

  12. Framework Programmable Platform for the advanced software development workstation: Framework processor design document

    Science.gov (United States)

    Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Ackley, Keith A.; Crump, Wes; Sanders, Les

    1991-01-01

    The design of the Framework Processor (FP) component of the Framework Programmable Software Development Platform (FFP) is described. The FFP is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software development environment. Guided by the model, this Framework Processor will take advantage of an integrated operating environment to provide automated support for the management and control of the software development process so that costly mistakes during the development phase can be eliminated.

  13. Making Fieldwork Valuable: Designing fieldwork programmes to meet the needs of young geologists

    Science.gov (United States)

    Thorne, Michael

    2016-04-01

    This work presents the culmination of many years' in designing and operating field courses for students studying Geology at post-16 level in the context of the British schooling system. Provided is a toolkit, and accompanying rationale, for the educators use when building a sustainable and manageable programme of fieldwork for young geologists. Many educators, particularly under the confines of new regulations have found the promise of increased paper work and accountability challenging and consequently field courses often play a peripheral, even non-existent role in the scheme of work for a large number of young geologists. The process of designing a suitable programme of field study must take account of the relevant stakeholders, chief among these are the views of students and staff but also those of parents, potential destination universities, exam boards and qualification accrediting groups. An audit of desired characteristics a programme of fieldwork would contain was completed using information gained through first hand research with students as well as in conversation with local universities. The results of this audit highlighted several confining factors ranging from the potential cost implications for school and parents, the extent to which content would support learning in class, and the feasibility of achieving all characteristics given limitations on staff and time. Student perceptions of the value of fieldwork were gauged through various means; group interviews were conducted during a number of academic years, field course evaluations were completed following excursions, and questionnaires were distributed at the close of the 2014-2015 academic year. Findings demonstrated that student perceptions of the benefits offered by fieldwork were several fold; chiefly students felt the inclusion of fieldwork was a very important motivator in their decision to study the subject and maintain curiosity in their studies, the belief that fieldwork acts as a

  14. A web-based computer-tailored smoking prevention programme for primary school children: intervention design and study protocol

    Science.gov (United States)

    2012-01-01

    Background Although the number of smokers has declined in the last decade, smoking is still a major health problem among youngsters and adolescents. For this reason, there is a need for effective smoking prevention programmes targeting primary school children. A web-based computer-tailored feedback programme may be an effective intervention to stimulate youngsters not to start smoking, and increase their knowledge about the adverse effects of smoking and their attitudes and self-efficacy regarding non-smoking. Methods & design This paper describes the development and evaluation protocol of a web-based out-of-school smoking prevention programme for primary school children (age 10-13 years) entitled ‘Fun without Smokes’. It is a transformation of a postal mailed intervention to a web-based intervention. Besides this transformation the effects of prompts will be examined. This web-based intervention will be evaluated in a 2-year cluster randomised controlled trial (c-RCT) with three study arms. An intervention and intervention + prompt condition will be evaluated for effects on smoking behaviour, compared with a no information control condition. Information about pupils’ smoking status and other factors related to smoking will be obtained using a web-based questionnaire. After completing the questionnaire pupils in both intervention conditions will receive three computer-tailored feedback letters in their personal e-mail box. Attitudes, social influences and self-efficacy expectations will be the content of these personalised feedback letters. Pupils in the intervention + prompt condition will - in addition to the personalised feedback letters - receive e-mail and SMS messages prompting them to revisit the ‘Fun without Smokes’ website. The main outcome measures will be ever smoking and the utilisation of the ‘Fun without Smokes’ website. Measurements will be carried out at baseline, 12 months and 24 months of follow-up. Discussion The present study

  15. A web-based computer-tailored smoking prevention programme for primary school children: intervention design and study protocol

    Directory of Open Access Journals (Sweden)

    Cremers Henricus-Paul

    2012-06-01

    Full Text Available Abstract Background Although the number of smokers has declined in the last decade, smoking is still a major health problem among youngsters and adolescents. For this reason, there is a need for effective smoking prevention programmes targeting primary school children. A web-based computer-tailored feedback programme may be an effective intervention to stimulate youngsters not to start smoking, and increase their knowledge about the adverse effects of smoking and their attitudes and self-efficacy regarding non-smoking. Methods & design This paper describes the development and evaluation protocol of a web-based out-of-school smoking prevention programme for primary school children (age 10-13 years entitled ‘Fun without Smokes’. It is a transformation of a postal mailed intervention to a web-based intervention. Besides this transformation the effects of prompts will be examined. This web-based intervention will be evaluated in a 2-year cluster randomised controlled trial (c-RCT with three study arms. An intervention and intervention + prompt condition will be evaluated for effects on smoking behaviour, compared with a no information control condition. Information about pupils’ smoking status and other factors related to smoking will be obtained using a web-based questionnaire. After completing the questionnaire pupils in both intervention conditions will receive three computer-tailored feedback letters in their personal e-mail box. Attitudes, social influences and self-efficacy expectations will be the content of these personalised feedback letters. Pupils in the intervention + prompt condition will - in addition to the personalised feedback letters - receive e-mail and SMS messages prompting them to revisit the ‘Fun without Smokes’ website. The main outcome measures will be ever smoking and the utilisation of the ‘Fun without Smokes’ website. Measurements will be carried out at baseline, 12 months and 24 months of follow

  16. Design of acoustic logging signal source of imitation based on field programmable gate array

    International Nuclear Information System (INIS)

    Zhang, K; Ju, X D; Lu, J Q; Men, B Y

    2014-01-01

    An acoustic logging signal source of imitation is designed and realized, based on the Field Programmable Gate Array (FPGA), to improve the efficiency of examining and repairing acoustic logging tools during research and field application, and to inspect and verify acoustic receiving circuits and corresponding algorithms. The design of this signal source contains hardware design and software design,and the hardware design uses an FPGA as the control core. Four signals are made first by reading the Random Access Memory (RAM) data which are inside the FPGA, then dealing with the data by digital to analog conversion, amplification, smoothing and so on. Software design uses VHDL, a kind of hardware description language, to program the FPGA. Experiments illustrate that the ratio of signal to noise for the signal source is high, the waveforms are stable, and also its functions of amplitude adjustment, frequency adjustment and delay adjustment are in accord with the characteristics of real acoustic logging waveforms. These adjustments can be used to imitate influences on sonic logging received waveforms caused by many kinds of factors such as spacing and span of acoustic tools, sonic speeds of different layers and fluids, and acoustic attenuations of different cementation planes. (paper)

  17. Design of acoustic logging signal source of imitation based on field programmable gate array

    Science.gov (United States)

    Zhang, K.; Ju, X. D.; Lu, J. Q.; Men, B. Y.

    2014-08-01

    An acoustic logging signal source of imitation is designed and realized, based on the Field Programmable Gate Array (FPGA), to improve the efficiency of examining and repairing acoustic logging tools during research and field application, and to inspect and verify acoustic receiving circuits and corresponding algorithms. The design of this signal source contains hardware design and software design,and the hardware design uses an FPGA as the control core. Four signals are made first by reading the Random Access Memory (RAM) data which are inside the FPGA, then dealing with the data by digital to analog conversion, amplification, smoothing and so on. Software design uses VHDL, a kind of hardware description language, to program the FPGA. Experiments illustrate that the ratio of signal to noise for the signal source is high, the waveforms are stable, and also its functions of amplitude adjustment, frequency adjustment and delay adjustment are in accord with the characteristics of real acoustic logging waveforms. These adjustments can be used to imitate influences on sonic logging received waveforms caused by many kinds of factors such as spacing and span of acoustic tools, sonic speeds of different layers and fluids, and acoustic attenuations of different cementation planes.

  18. Preliminary design of an advanced programmable digital filter network for large passive acoustic ASW systems. [Parallel processor

    Energy Technology Data Exchange (ETDEWEB)

    McWilliams, T.; Widdoes, Jr., L. C.; Wood, L.

    1976-09-30

    The design of an extremely high performance programmable digital filter of novel architecture, the LLL Programmable Digital Filter, is described. The digital filter is a high-performance multiprocessor having general purpose applicability and high programmability; it is extremely cost effective either in a uniprocessor or a multiprocessor configuration. The architecture and instruction set of the individual processor was optimized with regard to the multiple processor configuration. The optimal structure of a parallel processing system was determined for addressing the specific Navy application centering on the advanced digital filtering of passive acoustic ASW data of the type obtained from the SOSUS net. 148 figures. (RWR)

  19. Programmable System-on-Chip (PSoC) Embedded Readout Designs for Liquid Helium Level Sensors.

    Science.gov (United States)

    Parasakthi, C; Gireesan, K; Usha Rani, R; Sheela, O K; Janawadkar, M P

    2014-08-01

    This article reports the development of programmable system-on-chip (PSoC)-based embedded readout designs for liquid helium level sensors using resistive liquid vapor discriminators. The system has been built for the measurement of liquid helium level in a concave-bottomed, helmet-shaped, fiber-reinforced plastic cryostat for magnetoencephalography. This design incorporates three carbon resistors as cost-effective sensors, which are mounted at desired heights inside the cryostat and were used to infer the liquid helium level by measuring their temperature-dependent resistance. Localized electrical heating of the carbon resistors was used to discriminate whether the resistor is immersed in liquid helium or its vapor by exploiting the difference in the heat transfer rates in the two environments. This report describes a single PSoC chip for the design and development of a constant current source to drive the three carbon resistors, a multiplexer to route the sensor outputs to the analog-to-digital converter (ADC), a buffer to avoid loading of the sensors, an ADC for digitizing the data, and a display using liquid crystal display cum light-emitting diode modules. The level sensor readout designed with a single PSoC chip enables cost-effective and reliable measurement system design. © 2014 Society for Laboratory Automation and Screening.

  20. Design and analysis of a dual mode CMOS field programmable analog array

    International Nuclear Information System (INIS)

    Cheng Xiaoyan; Yang Haigang; Yin Tao; Wu Qisong; Zhang Hongfeng; Liu Fei

    2014-01-01

    This paper presents a novel field-programmable analog array (FPAA) architecture featuring a dual mode including discrete-time (DT) and continuous-time (CT) operation modes, along with a highly routable connection boxes (CBs) based interconnection lattice. The dual mode circuit for the FPAA is capable of achieving targeted optimal performance in different applications. The architecture utilizes routing switches in a CB not only for the signal interconnection purpose but also for control of the electrical charge transfer required in switched-capacitor circuits. This way, the performance of the circuit in either mode shall not be hampered with adding of programmability. The proposed FPAA is designed and implemented in a 0.18 μm standard CMOS process with a 3.3 V supply voltage. The result from post-layout simulation shows that a maximum bandwidth of 265 MHz through the interconnection network is achieved. The measured results from demonstrated examples show that the maximum signal bandwidth of up to 2 MHz in CT mode is obtained with the spurious free dynamic range of 54 dB, while the signal processing precision in DT mode reaches 96.4%. (semiconductor integrated circuits)

  1. Designed cell consortia as fragrance-programmable analog-to-digital converters.

    Science.gov (United States)

    Müller, Marius; Ausländer, Simon; Spinnler, Andrea; Ausländer, David; Sikorski, Julian; Folcher, Marc; Fussenegger, Martin

    2017-03-01

    Synthetic biology advances the rational engineering of mammalian cells to achieve cell-based therapy goals. Synthetic gene networks have nearly reached the complexity of digital electronic circuits and enable single cells to perform programmable arithmetic calculations or to provide dynamic remote control of transgenes through electromagnetic waves. We designed a synthetic multilayered gaseous-fragrance-programmable analog-to-digital converter (ADC) allowing for remote control of digital gene expression with 2-bit AND-, OR- and NOR-gate logic in synchronized cell consortia. The ADC consists of multiple sampling-and-quantization modules sensing analog gaseous fragrance inputs; a gas-to-liquid transducer converting fragrance intensity into diffusible cell-to-cell signaling compounds; a digitization unit with a genetic amplifier circuit to improve the signal-to-noise ratio; and recombinase-based digital expression switches enabling 2-bit processing of logic gates. Synthetic ADCs that can remotely control cellular activities with digital precision may enable the development of novel biosensors and may provide bioelectronic interfaces synchronizing analog metabolic pathways with digital electronics.

  2. Worksite interventions for preventing physical deterioration among employees in job-groups with high physical work demands: Background, design and conceptual model of FINALE

    Directory of Open Access Journals (Sweden)

    Mortensen Ole S

    2010-03-01

    Full Text Available Abstract Background A mismatch between individual physical capacities and physical work demands enhance the risk for musculoskeletal disorders, poor work ability and sickness absence, termed physical deterioration. However, effective intervention strategies for preventing physical deterioration in job groups with high physical demands remains to be established. This paper describes the background, design and conceptual model of the FINALE programme, a framework for health promoting interventions at 4 Danish job groups (i.e. cleaners, health-care workers, construction workers and industrial workers characterized by high physical work demands, musculoskeletal disorders, poor work ability and sickness absence. Methods/Design A novel approach of the FINALE programme is that the interventions, i.e. 3 randomized controlled trials (RCT and 1 exploratory case-control study are tailored to the physical work demands, physical capacities and health profile of workers in each job-group. The RCT among cleaners, characterized by repetitive work tasks and musculoskeletal disorders, aims at making the cleaners less susceptible to musculoskeletal disorders by physical coordination training or cognitive behavioral theory based training (CBTr. Because health-care workers are reported to have high prevalence of overweight and heavy lifts, the aim of the RCT is long-term weight-loss by combined physical exercise training, CBTr and diet. Construction work, characterized by heavy lifting, pushing and pulling, the RCT aims at improving physical capacity and promoting musculoskeletal and cardiovascular health. At the industrial work-place characterized by repetitive work tasks, the intervention aims at reducing physical exertion and musculoskeletal disorders by combined physical exercise training, CBTr and participatory ergonomics. The overall aim of the FINALE programme is to improve the safety margin between individual resources (i.e. physical capacities, and

  3. Kinetics experiments and bench-scale system: Background, design, and preliminary experiments

    International Nuclear Information System (INIS)

    Rofer, C.K.

    1987-10-01

    The project, Supercritical Water Oxidation of Hazardous Chemical Waste, is a Hazardous Waste Remedial Actions Program (HAZWRAP) Research and Development task being carried out by the Los Alamos National Laboratory. Its objective is to obtain information for use in understanding the basic technology and for scaling up and applying oxidation in supercritical water as a viable process for treating a variety of DOE-DP waste streams. This report gives the background and rationale for kinetics experiments on oxidation in supercritical water being carried out as a part of this HAZWRAP Research and Development task. It discusses supercritical fluid properties and their relevance to applying this process to the destruction of hazardous wastes. An overview is given of the small emerging industry based on applications of supercritical water oxidation. Factors that could lead to additional applications are listed. Modeling studies are described as a basis for the experimental design. The report describes plug flow reactor and batch reactor systems, and presents preliminary results. 28 refs., 4 figs., 5 tabs

  4. Designing and Developing a Programme-Focused Assessment Strategy: A Case Study

    Science.gov (United States)

    Brunton, James; Brown, Mark; Costello, Eamon; Walsh, Elaine

    2016-01-01

    This case study describes the process that the Humanities Programme Team, in Dublin City University's Open Education Unit, has undertaken with regard to developing a systematic, programme-focused assessment strategy. It charts the development of an Assessment Matrix that facilitated the enhancement of programme coherence in the context of a…

  5. Evaluating the Level of Degree Programmes in Higher Education: Conceptual Design

    Science.gov (United States)

    Rexwinkel, Trudy; Haenen, Jacques; Pilot, Albert

    2013-01-01

    Evaluating the level of degree programmes became crucial with the Bologna Agreement in 1999 when European ministers agreed to implement common bachelor's and master's degree programmes and a common system of quality assurance. The European Quality Assurance system demands evaluation of the degree programme level based on valid and reliable…

  6. Design assurance programme for modifications at the Ringhals Nuclear Power Plant

    International Nuclear Information System (INIS)

    Persson, K.

    1985-01-01

    The Engineering Department within the site organization is responsible for modifications and improvements of plant design. Internal and external specialists are also involved in the design activities. Modifications follow the procedures laid down in the Design Assurance Programme (DAP), according to the overall directions given in 10CFR50 APP B and the more detailed recommendations in American Nuclear Standard 3.2, and the United States Nuclear Regulatory Commission's Regulatory Guides 1.33 and 1.64. The site Quality Assurance Department has adapted these directions to Swedish conditions. All plant modifications are ordered from customers within the site organization. The design work is performed according to the following steps: priority of problems or requirements; overall analysis of problems or requirements; basic design (preliminary and final); detailed design (electrical, mechanical, civil); purchase of equipment; installation in plant; testing of installed equipment. The project engineer is responsible for modifications from the initiation of analysis until testing and documentation are finalized. For each step, procedures and checklists are available. Internal and external specialists as well as the Swedish Nuclear Inspectorate are involved when appropriate. Design engineers and QC/QE engineers are also involved. Special groups within the site organization handle purchase and installation. Testing the installed equipment is performed in co-operation with the operation staff. Deviations from DAP must be reported by all personnel, and corrective actions must be taken. Internal audits have to be done once a year for the entire DAP and the audit, with its findings and the corrective actions taken, must be reported to the QA group. (author)

  7. Framework Programmable Platform for the Advanced Software Development Workstation: Preliminary system design document

    Science.gov (United States)

    Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Ackley, Keith A.; Crump, John W., IV; Henderson, Richard; Futrell, Michael T.

    1991-01-01

    The Framework Programmable Software Development Platform (FPP) is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software environment. Guided by the model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated. The focus here is on the design of components that make up the FPP. These components serve as supporting systems for the Integration Mechanism and the Framework Processor and provide the 'glue' that ties the FPP together. Also discussed are the components that allow the platform to operate in a distributed, heterogeneous environment and to manage the development and evolution of software system artifacts.

  8. Designing to Promote Access, Quality, and Student Support in an Advanced Certificate Programme for Rural Teachers in South Africa

    Directory of Open Access Journals (Sweden)

    Jill W. Fresen

    2009-09-01

    Full Text Available This paper reports on the re-design of the Advanced Certificate in Education (ACE programme, which is offered by the University of Pretoria through distance education (DE to teachers in rural South Africa. In 2007, a team re-designed the programme with the goal of promoting access, quality, and student support. The team included an independent body, the South African Institute of Distance Education (SAIDE, and various education specialists. Training workshops for academics and a comprehensive internal and external review process contributed to the quality of the re-designed programme. Interactive web-based technologies were not included because of poor Internet connectivity; however, the authors note the use and potential of cell phone technology for DE programmes. Student support was enhanced by an additional short contact session, a capping assignment, a CD-ROM, and decentralised tutoring at contact venues. The programme was re-evaluated and approved in 2008, and the re-design methodology now guides similar projects.

  9. More Efficient e-Learning through Design: Color of Text and Background

    Science.gov (United States)

    Zufic, Janko; Kalpic, Damir

    2009-01-01

    Background: The area of research aimed for a more efficient e-learning is slowly widening from purely technical to the areas of psychology, didactics and methodology. The question is whether the text or background color influence the efficiency of memory, i.e. learning. If the answer to that question is positive, then another question arises which…

  10. Training simulators in nuclear power plants: Experience, programme design and assessment methodology. Proceedings of a specialists' meeting

    International Nuclear Information System (INIS)

    1997-11-01

    Simulators became an indispensable part of training world-wide. Therefore, international exchange of information is important to share the experience gained in different countries in order to assure high international standards. A second aspects is the tremendous evolution in the computing capacities of the simulator hardware and the increasing functionality of the simulator software. This background has let the IAEA to invite the simulator experts for an experience exchange. The German Simulator Centre in Essen, which is operated by the companies KSG and GfS, was asked to host this Specialists' Meeting. The Specialists' Meeting on ''Training Simulators in Nuclear Power Plants: Experience, Programme Design and Assessment Methodology'' was organized by IAEA in-cooperation with the German Simulator Centre operated by KSG Kraftwerks-Simulator-Gesellschaft mbH and GfS Gesellschaft fuer Simulatorschulung mbH and was held from 17 - 19 November 1997 in Essen, Germany. The meeting focused on developments in simulation technology, experiences with simulator upgrades, utilization of computerized tools as support and complement of simulator training, use of simulators for other purposes. The meeting was attended by 50 participants from 16 countries. In the course of four sessions 21 technical presentations were made. The present volume contains the papers by national delegates at the Specialists' Meeting

  11. Training simulators in nuclear power plants: Experience, programme design and assessment methodology. Proceedings of a specialists` meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    Simulators became an indispensable part of training world-wide. Therefore, international exchange of information is important to share the experience gained in different countries in order to assure high international standards. A second aspects is the tremendous evolution in the computing capacities of the simulator hardware and the increasing functionality of the simulator software. This background has let the IAEA to invite the simulator experts for an experience exchange. The German Simulator Centre in Essen, which is operated by the companies KSG and GfS, was asked to host this Specialists` Meeting. The Specialists` Meeting on ``Training Simulators in Nuclear Power Plants: Experience, Programme Design and Assessment Methodology`` was organized by IAEA in-cooperation with the German Simulator Centre operated by KSG Kraftwerks-Simulator-Gesellschaft mbH and GfS Gesellschaft fuer Simulatorschulung mbH and was held from 17 - 19 November 1997 in Essen, Germany. The meeting focused on developments in simulation technology, experiences with simulator upgrades, utilization of computerized tools as support and complement of simulator training, use of simulators for other purposes. The meeting was attended by 50 participants from 16 countries. In the course of four sessions 21 technical presentations were made. The present volume contains the papers by national delegates at the Specialists` Meeting Refs, figs, tabs

  12. Systematic design of 3D auxetic lattice materials with programmable Poisson's ratio for finite strains

    Science.gov (United States)

    Wang, Fengwen

    2018-05-01

    This paper presents a systematic approach for designing 3D auxetic lattice materials, which exhibit constant negative Poisson's ratios over large strain intervals. A unit cell model mimicking tensile tests is established and based on the proposed model, the secant Poisson's ratio is defined as the negative ratio between the lateral and the longitudinal engineering strains. The optimization problem for designing a material unit cell with a target Poisson's ratio is formulated to minimize the average lateral engineering stresses under the prescribed deformations. Numerical results demonstrate that 3D auxetic lattice materials with constant Poisson's ratios can be achieved by the proposed optimization formulation and that two sets of material architectures are obtained by imposing different symmetry on the unit cell. Moreover, inspired by the topology-optimized material architecture, a subsequent shape optimization is proposed by parametrizing material architectures using super-ellipsoids. By designing two geometrical parameters, simple optimized material microstructures with different target Poisson's ratios are obtained. By interpolating these two parameters as polynomial functions of Poisson's ratios, material architectures for any Poisson's ratio in the interval of ν ∈ [ - 0.78 , 0.00 ] are explicitly presented. Numerical evaluations show that interpolated auxetic lattice materials exhibit constant Poisson's ratios in the target strain interval of [0.00, 0.20] and that 3D auxetic lattice material architectures with programmable Poisson's ratio are achievable.

  13. The Effectiveness and Sustainability of a Universal School-Based Programme for Preventing Depression in Chinese Adolescents: A Follow-Up Study Using Quasi-Experimental Design

    Science.gov (United States)

    Lai, Eliza S. Y.; Kwok, Chi-Leung; Wong, Paul W. C.; Fu, King-Wa; Law, Yik-Wa; Yip, Paul S. F.

    2016-01-01

    Background A pilot study about the effectiveness of a universal school-based programme, “The Little Prince is Depressed”, for preventing depression in Chinese adolescents in Hong Kong was conducted and reported previously. This study used a larger sample to examine the effectiveness and sustainability of the programme. Methods This study used quasi-experimental design. Twelve schools enrolled in “The Little Prince is Depressed” programme either as an intervention or a control condition. The intervention schools carried out the 12-session programme in two phases: the professional-led first phase and the teacher-led second phase. All participants were required to complete a questionnaire at three time points measuring their (1) depressive, anxiety, and stress levels; (2) knowledge of mental health; (3) attitudes towards mental illness; (4) perceived social support; and (5) help-seeking behaviours. Results A total of 3,391 students participated in the study. The level of depressive symptoms did not reduce significantly at post-intervention; however, a delayed effect was observed at follow-up assessment for the participants of the teacher-led group in reducing anxiety and stress levels. Also, the knowledge of mental health and attitudes towards mental illness of the intervention-group participants significantly improved at post-test, and the outcomes were maintained at 4 to 5 months after the intervention in both the professional-led and the teacher-led conditions (pmental health and promoting a more positive attitude towards mental illness among adolescents in Hong Kong. In particular, the teacher-led group showed better outcomes than the professional-led group in reducing students’ anxiety and stress at follow-up period. The programme can achieve sustainability in schools if teachers are provided with adequate support. PMID:26921275

  14. The role of consultant-researchers in the design and implementation process of a programme budget in a local government organization

    NARCIS (Netherlands)

    ter Bogt, H.J.; van Helden, G.J.

    This paper deals with our role as consultant-researchers in the improvement trajectory of a programme budget used in a Dutch province. For the 2009s programme budget the newly designed budget format was used in two pilot programmes. One year later we participated in the implementation of this format

  15. Task 9. Deployment of photovoltaic technologies: co-operation with developing countries. PV for rural electrification in developing countries - Programme design, planning and implementation

    Energy Technology Data Exchange (ETDEWEB)

    Parker, W. [Institute for Sustainable Power, Highlands Ranch, CO (United States); Oldach, R.; Wilshaw, A. [IT Power Ltd, The Manor house, Chineham (United Kingdom)

    2003-09-15

    This report for the International Energy Agency (IEA) made by Task 9 of the Photovoltaic Power Systems (PVPS) programme takes a look at the design, planning and implementation of PV programmes. The guide contains details on the preparation for PV programmes, including the assessment of needs, stakeholder consultation, social context analysis, supply options and national policy considerations. The establishment of goals, delivery modes, timelines, logistics and quality assurance are discussed. Further, the implementation, monitoring and evaluation of PV programmes is discussed, as are a number of methodologies that have been developed with the aim of improving programme design and implementation. The guide highlights issues pertinent to rural energy programmes in developing countries and leads programme administrators through the process of planning, implementing and evaluating a PV programme.

  16. R20 programme: Development of rock grouting design, techniques and procedures for ONKALO

    International Nuclear Information System (INIS)

    Sievaenen, U.

    2009-02-01

    Posiva Oy constructs an underground research facility ONKALO at Olkiluoto in Eurajoki. ONKALO is planned to be a part of the deep repository for the high level nuclear waste. Posiva Oy set up R20-programme for the years 2006-2008, with the target of having an acceptable grouting methodology in ONKALO. The programme was divided into three projects and the work and results of Technique-project is presented in this report. The implementation of the results (grouting design and execution) was outlined from the project. That work is under the responsibility of construction of the ONKALO-project. The Grouting Technique -project (INKE) studied the grouting experiences obtained from the first 2 km of the ONKALO access tunnel, searched for suitable grouting design approaches, carried out two grouting tests and one pilot grouting test with colloidal silica in ONKALO, analysed the expected grouting conditions in deep rock from the grouting point of view, studied the feasibility of so called optimal design solution in the expected grouting conditions. Based on these studies recommendations concerning the grouting design, design solutions for different rock conditions, grouting procedures, grouting stop criteria, the characterisation methods for grouting purposes, grouting materials and grouting work performance are presented. Swedish Time Stop Grouting, also named Grouting Time-Method was selected to be studied and used in this project and it was further developed. This work compiles the outcome of the project subtasks and presents the recommendations for developing the grouting in ONKALO. The key conclusion of this work are: (1) Grouting Time-method (time stop grouting) alone is not enough to be used as a grouting stop criterion due to the uncertainties related to the source parameters (fracture characteristics, rheological properties of grouts); these cause too high uncertainties when proving the sealing result via the grouting time, (2) due to the uncertainties related to

  17. Monte Carlo simulations for the optimisation of low-background Ge detector designs

    Energy Technology Data Exchange (ETDEWEB)

    Hakenmueller, Janina; Heusser, Gerd; Maneschg, Werner; Schreiner, Jochen; Simgen, Hardy; Stolzenburg, Dominik; Strecker, Herbert; Weber, Marc; Westernmann, Jonas [Max-Planck-Institut fuer Kernphysik, Saupfercheckweg 1, 69117 Heidelberg (Germany); Laubenstein, Matthias [Laboratori Nazionali del Gran Sasso, Via G. Acitelli 22, 67100 Assergi L' Aquila (Italy)

    2015-07-01

    Monte Carlo simulations for the low-background Ge spectrometer Giove at the underground laboratory of MPI-K, Heidelberg, are presented. In order to reduce the cosmogenic background at the present shallow depth (15 m w.e.) the shielding of the spectrometer includes an active muon veto and a passive shielding (lead and borated PE layers). The achieved background suppression is comparable to Ge spectrometers operated in much greater depth. The geometry of the detector and the shielding were implemented using the Geant4-based toolkit MaGe. The simulations were successfully optimised by determining the correct diode position and active volume. With the help of the validated Monte Carlo simulation the contribution of the single components to the overall background can be examined. This includes a comparison between simulated results and measurements with different fillings of the sample chamber. Having reproduced the measured detector background in the simulation provides the possibility to improve the background by reverse engineering of the passive and active shield layers in the simulation.

  18. Design techniques for a stable operation of cryogenic field-programmable gate arrays

    Science.gov (United States)

    Homulle, Harald; Visser, Stefan; Patra, Bishnu; Charbon, Edoardo

    2018-01-01

    In this paper, we show how a deep-submicron field-programmable gate array (FPGA) can be operated more stably at extremely low temperatures through special firmware design techniques. Stability at low temperatures is limited through long power supply wires and reduced performance of various printed circuit board components commonly employed at room temperature. Extensive characterization of these components shows that the majority of decoupling capacitor types and voltage regulators are not well behaved at cryogenic temperatures, asking for an ad hoc solution to stabilize the FPGA supply voltage, especially for sensitive applications. Therefore, we have designed a firmware that enforces a constant power consumption, so as to stabilize the supply voltage in the interior of the FPGA. The FPGA is powered with a supply at several meters distance, causing significant resistive voltage drop and thus fluctuations on the local supply voltage. To achieve the stabilization, the variation in digital logic speed, which directly corresponds to changes in supply voltage, is constantly measured and corrected for through a tunable oscillator farm, implemented on the FPGA. The impact of the stabilization technique is demonstrated together with a reconfigurable analog-to-digital converter (ADC), completely implemented in the FPGA fabric and operating at 15 K. The ADC performance can be improved by at most 1.5 bits (effective number of bits) thanks to the more stable supply voltage. The method is versatile and robust, enabling seamless porting to other FPGA families and configurations.

  19. A Train-the-Trainer Design for Green Ambassadors in an Environmental Education Programme on Plastic Waste Recycling

    Science.gov (United States)

    Cheung, Yannes Tsz-Yan; Chow, Cheuk-Fai; So, Winnie Wing-Mui

    2018-01-01

    To educate a sustainable future, a train-the-trainer (TTT) approach was adopted to train student teachers (STs) from a teacher education institute to be green ambassadors (GAs) in an environmental education (EE) programme with the aim of promoting plastic waste recycling among primary school pupils. The design of the TTT course for the GAs not…

  20. Evaluating the level of degree programmes in higher education: Conceptual design

    NARCIS (Netherlands)

    Rexwinkel, G.B.; Haenen, J.P.P.; Pilot, A.

    2013-01-01

    Evaluating the level of degree programmes became crucial with the Bologna Agreement in 1999 when European ministers agreed to implement common bachelor’s and master’s degree programmes and a common system of quality assurance. The European Quality Assurance system demands evaluation of the degree

  1. Evaluation of phoneme compression schemes designed to compensate for temporal and spectral masking in background noise

    NARCIS (Netherlands)

    Goedegebure, A.; Goedegebure-Hulshof, M.; Dreschler, W. A.; Verschuure, J.

    2005-01-01

    The effect of phonemic compression has been studied on speech intelligibility in background noise in hearing-impaired listeners with moderate-to-severe high-frequency losses. One configuration, anti-upward-spread-of-masking (anti-USOM) focuses on a release from spectral masking of high-frequency

  2. Design of a Programmable Gain, Temperature Compensated Current-Input Current-Output CMOS Logarithmic Amplifier.

    Science.gov (United States)

    Ming Gu; Chakrabartty, Shantanu

    2014-06-01

    This paper presents the design of a programmable gain, temperature compensated, current-mode CMOS logarithmic amplifier that can be used for biomedical signal processing. Unlike conventional logarithmic amplifiers that use a transimpedance technique to generate a voltage signal as a logarithmic function of the input current, the proposed approach directly produces a current output as a logarithmic function of the input current. Also, unlike a conventional transimpedance amplifier the gain of the proposed logarithmic amplifier can be programmed using floating-gate trimming circuits. The synthesis of the proposed circuit is based on the Hart's extended translinear principle which involves embedding a floating-voltage source and a linear resistive element within a translinear loop. Temperature compensation is then achieved using a translinear-based resistive cancelation technique. Measured results from prototypes fabricated in a 0.5 μm CMOS process show that the amplifier has an input dynamic range of 120 dB and a temperature sensitivity of 230 ppm/°C (27 °C- 57°C), while consuming less than 100 nW of power.

  3. Design and environmental applications of an ultra-low-background, high-efficiency intrinsic Ge gamma-ray spectrometer

    International Nuclear Information System (INIS)

    Wogman, N.A.

    1981-04-01

    A coincidence shielded intrinsic Ge gamma-ray spectrometer incorporating a 25% efficient, high resolution coaxial diode inside a 30 cm diameter NaI(Tl) shield is described. System design eliminates the major cause of background and minimizes cosmic-ray created background events through the use of electronic means. The system provides a peak-to-Compton ratio of greater than 1000 to 1 for 137 Cs and high sensitivity for both low and high level radionuclide measurements. At 3 MeV the background is 0.000058 counts per minute per keV. At 1 MeV it is 0.00048 counts per minute per keV, and at 0.5 MeV it is 0.0045 counts per minute per keV. Traces of primordial radionuclides create background events such as at 2.614 MeV (0.016 counts per minute total peak area), at 2.448 MeV (0.0058 counts per minute per total peak area), and at 2.204 MeV (0.023 counts per minute per total peak area). The system is discussed with respect to its background design, methods to improve its design, and its application to measurements of neutron activated and environmental materials problems

  4. Worksite interventions for preventing physical deterioration among employees in job-groups with high physical work demands: background, design and conceptual model of FINALE.

    Science.gov (United States)

    Holtermann, Andreas; Jørgensen, Marie B; Gram, Bibi; Christensen, Jeanette R; Faber, Anne; Overgaard, Kristian; Ektor-Andersen, John; Mortensen, Ole S; Sjøgaard, Gisela; Søgaard, Karen

    2010-03-09

    A mismatch between individual physical capacities and physical work demands enhance the risk for musculoskeletal disorders, poor work ability and sickness absence, termed physical deterioration. However, effective intervention strategies for preventing physical deterioration in job groups with high physical demands remains to be established. This paper describes the background, design and conceptual model of the FINALE programme, a framework for health promoting interventions at 4 Danish job groups (i.e. cleaners, health-care workers, construction workers and industrial workers) characterized by high physical work demands, musculoskeletal disorders, poor work ability and sickness absence. A novel approach of the FINALE programme is that the interventions, i.e. 3 randomized controlled trials (RCT) and 1 exploratory case-control study are tailored to the physical work demands, physical capacities and health profile of workers in each job-group. The RCT among cleaners, characterized by repetitive work tasks and musculoskeletal disorders, aims at making the cleaners less susceptible to musculoskeletal disorders by physical coordination training or cognitive behavioral theory based training (CBTr). Because health-care workers are reported to have high prevalence of overweight and heavy lifts, the aim of the RCT is long-term weight-loss by combined physical exercise training, CBTr and diet. Construction work, characterized by heavy lifting, pushing and pulling, the RCT aims at improving physical capacity and promoting musculoskeletal and cardiovascular health. At the industrial work-place characterized by repetitive work tasks, the intervention aims at reducing physical exertion and musculoskeletal disorders by combined physical exercise training, CBTr and participatory ergonomics. The overall aim of the FINALE programme is to improve the safety margin between individual resources (i.e. physical capacities, and cognitive and behavioral skills) and physical work demands

  5. Designing Programme Implementation Strategies to Increase the Adoption and Use of Biosand Water Filters in Rural India

    Directory of Open Access Journals (Sweden)

    Tommy K.K. Ngai

    2014-06-01

    Full Text Available Low-cost household water treatment systems are innovations designed to improve the quality of drinking water at the point of use. This study investigates how an NGO can design appropriate programme strategies in order to increase the adoption and sustained use of household sand filters in rural India. A system dynamics computer model was developed and used to assess 18 potential programme strategies for their effectiveness in increasing filter use at two and ten years into the future, under seven scenarios of how the external context may plausibly evolve. The results showed that the optimal choice of strategy is influenced by the macroeconomic situation, donor funding, presence of alternative options, and the evaluation time frame. The analysis also revealed some key programme management challenges, including the trade-off between optimising short- or long-term gains, and counter-intuitive results, such as higher subsidy fund allocation leading to fewer filter distribution, and technology advances leading to fewer sales. This study outlines how an NGO can choose effective strategies in consideration of complex system interactions. This study demonstrated that small NGOs can dramatically increase their programme outcomes without necessarily increasing operational budget.

  6. Designing financial-incentive programmes for return of medical service in underserved areas: seven management functions

    Directory of Open Access Journals (Sweden)

    Bärnighausen Till

    2009-06-01

    Full Text Available Abstract In many countries worldwide, health worker shortages are one of the main constraints in achieving population health goals. Financial-incentive programmes for return of service, whereby participants receive payments in return for a commitment to practise for a period of time in a medically underserved area, can alleviate local and regional health worker shortages through a number of mechanisms. First, they can redirect the flow of those health workers who would have been educated without financial incentives from well-served to underserved areas. Second, they can add health workers to the pool of workers who would have been educated without financial incentives and place them in underserved areas. Third, financial-incentive programmes may improve the retention in underserved areas of those health workers who participate in a programme, but who would have worked in an underserved area without any financial incentives. Fourth, the programmes may increase the retention of all health workers in underserved areas by reducing the strength of some of the reasons why health workers leave such areas, including social isolation, lack of contact with colleagues, lack of support from medical specialists and heavy workload. We draw on studies of financial-incentive programmes and other initiatives with similar objectives to discuss seven management functions that are essential for the long-term success of financial-incentive programmes: financing (programmes may benefit from innovative donor financing schemes, such as endowment funds, international financing facilities or compensation payments; promotion (programmes should use tested communication channels in order to reach secondary school graduates and health workers; selection (programmes may use selection criteria to ensure programme success and to achieve supplementary policy goals; placement (programmes should match participants to areas in order to maximize participant satisfaction and

  7. Designing financial-incentive programmes for return of medical service in underserved areas: seven management functions.

    Science.gov (United States)

    Bärnighausen, Till; Bloom, David E

    2009-06-26

    In many countries worldwide, health worker shortages are one of the main constraints in achieving population health goals. Financial-incentive programmes for return of service, whereby participants receive payments in return for a commitment to practise for a period of time in a medically underserved area, can alleviate local and regional health worker shortages through a number of mechanisms. First, they can redirect the flow of those health workers who would have been educated without financial incentives from well-served to underserved areas. Second, they can add health workers to the pool of workers who would have been educated without financial incentives and place them in underserved areas. Third, financial-incentive programmes may improve the retention in underserved areas of those health workers who participate in a programme, but who would have worked in an underserved area without any financial incentives. Fourth, the programmes may increase the retention of all health workers in underserved areas by reducing the strength of some of the reasons why health workers leave such areas, including social isolation, lack of contact with colleagues, lack of support from medical specialists and heavy workload. We draw on studies of financial-incentive programmes and other initiatives with similar objectives to discuss seven management functions that are essential for the long-term success of financial-incentive programmes: financing (programmes may benefit from innovative donor financing schemes, such as endowment funds, international financing facilities or compensation payments); promotion (programmes should use tested communication channels in order to reach secondary school graduates and health workers); selection (programmes may use selection criteria to ensure programme success and to achieve supplementary policy goals); placement (programmes should match participants to areas in order to maximize participant satisfaction and retention); support (programmes

  8. Physical and Experimental Background of the Design of the ELISE Test Facility

    International Nuclear Information System (INIS)

    Franzen, P.; Fantz, U.; Kraus, W.; Falter, H.; Heinemann, B.; Nocentini, R.

    2009-01-01

    In 2007 the IPP RF driven negative hydrogen ion source was chosen by the ITER board as the new reference source for the ITER neutral beam system. In order to support the design of the Neutral Beam Test Facility in Padua and its commissioning and operating phases, IPP is presently constructing a new test facility ELISE (Extraction from a Large Ion Source Experiment) for a large-scale extraction from a half-size ITER RF source. Plasma operation of up to one hour is foreseen; but due to the limits of the IPP HV system, pulsed extraction only is possible. The extraction system is designed for acceleration of negative ions of up to 60 kV. The start of the ELISE operation is planned for middle of 2010. The aim of the design of the ELISE source and extraction system was to be as close as possible to the ITER design; it has however some modifications allowing a better diagnostic access as well as more flexibility for exploring open questions. The design was also supported by diagnostics and modeling efforts of the processes leading to negative ion production and extraction in a RF source.

  9. Design and Simulation of Automatic Ballast System on Catamaran Ship Based on Programmable Logic Control

    Directory of Open Access Journals (Sweden)

    Indra Ranu Kusuma

    2017-06-01

    Full Text Available Characteristics of catamaran ship which has deficiency to ship stability during maneuvering. to that end, this paper concerns about ballast system design in support of the safety and comfort of passengers on the catamaran boat. the discussion is done by creating a mathematical model of each component in the block diagram of the ballast system. then determine the pid value of the system and add the compensator for the system to run stable. further analyzed with the help of matlab software to get transient system response. with the automation system on the ballast system, it is expected that the motion of the ship can work automatically and provide a better response in the stability of the catamaran type ship. the ballast system begins to work against the tilt of the ship at 6.7 seconds at a certain angle, and will continue to work during the vessel maneuvering. judging from the 6.7 second system response time, the convenience of the passengers is not disturbed (the system response is not too fast. one way to reduce the rolling that occurs on the ship is to optimize the performance of the ballast system. performance optimization is done by using programmable logic controller (plc. plc used is omron cpm1a-30cdr-a-v1. the process is done by making the installation plant model of the ballast system as a control medium. followed by creating a control circuit consisting of wiring i / o, limit switch circuits, power supplies and programming languages associated with plcs. the result of the control is expected to regulate fluid flow in the ballast system automatically resulting in a rapid response to the stability of the ship.

  10. Creative engineering design assessment background, directions, manual, scoring guide and uses

    CERN Document Server

    Charyton, Christine

    2014-01-01

    The Creative Engineering Design Assessment or CEDA is a newly developed tool to assess creativity specific to engineering design which is vital for innovation. The revised CEDA assesses usefulness in addition to originality.  Both originality and usefulness are key constructs in creativity but are primarily essential and emphasized ever more in engineering design.  Since the preliminary research was presented to the National Science Foundation, further reliability and validity has been developed and established. The CEDA is different from other general creativity measures as it demonstrates discriminant validity with the Creative Personality Scale, Creative Temperament Scale, and the Cognitive Risk Tolerance Scale, and has demonstrated convergent validity with the Purdue Creativity Test and the Purdue Spatial Visualization Test- Rotations. It focuses on engineering specific measures, measuring engineering creativity and spatial skills. The aim of this book is to disseminate the CEDA tool for use in engin...

  11. The interrelation between design and innovation - the role of different professional backgrounds

    DEFF Research Database (Denmark)

    Minder, Bettina; Lassen, Astrid Heidemann

    2017-01-01

    Design and innovation share the interest in creativity and development of novel solutions. However, literature does also provides sufficient material pointing to divergent views on the interrelation between two fields, where the focus lies on the distinction between two opposing discourses: one...... focusing on human-centeredness processes, the other favouring more linear process models (innovation management). Hence, design is increasingly often considered in innovation management because (not despite) the conflicts from different world-views (Brown, 2008, Boland and Collopy, 2004). Conceptual...... clarity becomes however more and more important, because the inclusion of design perspectives happen in situation, which require conscious shaping of innovation environment to harness complexity (Garud and Karnoe, 2013). This paper addresses the question of how the two concepts are understood...

  12. Research on Automatic Ticketing Interface Design of Tianjin South Station under the Background of Aging

    Science.gov (United States)

    Zhenghui, Zhao

    2018-04-01

    Based on the context of increasingly serious aging problem in China, the psychological characteristics of elders in using public self-service facilities and the development status and the future trend of public self-service ticketing service. The approach is analysing physiological and psychological characteristics, education level of the elderly and studying its characteristics of consumer psychology and regional cultural characteristics profoundly before conducting comprehensive analysis and research in combination with the interface features of public self-service ticketing machine. The interface design will be more personalized, intelligent, regional and international. Strategies of caring for the elderly in the regional public self-service facility interface design innovation develops the concept of taking care of the elderly in the entire region as an indispensable people-benefiting optimization system in the modern social services.

  13. DESIGN AND ENGINEERING BACKGROUND FOR STATION NETWORKS OF VERTICAL IONOSPHERE SOUNDING

    Directory of Open Access Journals (Sweden)

    A. Y. Grishentsev

    2013-05-01

    Full Text Available The paper deals with analysis of the network stations structure for ionosphere vertical sounding. Design features and creation principle of the program complexes for automated processing, analysis and storage of ionosphere sounding are considered. Conceptual model of complex database control system is created. The results of work are used in research practice of leading national organizations to study the ionosphere. Obtained application results of suggested algorithms and programs for automated processing and analysis of ionosphere vertical sounding are shown.

  14. Adaption of the radiation dose for computed tomography of the body - back-ground for the dose adaption programme OmnimAs; Straaldosreglering vid kroppsdatortomografi - bakgrund till dosregleringsprogrammet OmnimAs

    Energy Technology Data Exchange (ETDEWEB)

    Nyman, Ulf; Kristiansson, Mattias [Trelleborg Hospital (Sweden); Leitz, Wolfram [Swedish Radiation Protection Authority, Stockholm (Sweden); Paahlstorp, Per-Aake [Siemens Medical Solutions, Solna (Sweden)

    2004-11-01

    When performing computed tomography examinations the exposure factors are hardly ever adapted to the patient's size. One reason for that might be the lack of simple methods. In this report the computer programme OmnimAs is described which is calculating how the exposure factors should be varied together with the patient's perimeter (which easily can be measured with a measuring tape). The first approximation is to calculate the exposure values giving the same noise levels in the image irrespective the patient's size. A clinical evaluation has shown that this relationship has to be modified. One chapter is describing the physical background behind the programme. Results calculated with OmnimAs are in good agreement with a number of published studies. Clinical experiences are showing the usability of OmnimAs. Finally the correlation between several parameters and image quality/dose is discussed and how this correlation can be made use of for optimising CT-examinations.

  15. The Managed Ventricular pacing versus VVI 40 Pacing (MVP) Trial: clinical background, rationale, design, and implementation.

    Science.gov (United States)

    Sweeney, Michael O; Ellenbogen, Kenneth A; Miller, Elaine Hogan; Sherfesee, Lou; Sheldon, Todd; Whellan, David

    2006-12-01

    Implantable cardioverter defibrillators (ICDs) reduce mortality among appropriately selected patients who have had or are at risk for life-threatening ventricular arrhythmia. Right ventricular apical (RVA) pacing has been implicated in worsening heart failure and death. The optimal pacemaker mode for bradycardia support while minimizing unnecessary and potentially harmful RVA pacing has not been determined. The Managed Ventricular pacing vs. VVI 40 Pacing Trial (MVP) is a prospective, multicenter, randomized, single-blind, parallel, controlled clinical trial designed to establish whether atrial-based dual-chamber managed ventricular pacing mode (MVP) is equivalent or superior to back-up only ventricular pacing (VVI 40) among patients with standard indications for ICD therapy and no indication for bradycardia pacing. The MVP Trial is designed with 80% power to detect a 10% reduction in the primary endpoint of new or worsening heart failure or all-cause mortality in the MVP-treated group. Approximately 1,000 patients at 80 centers in the United States, Canada, Western Europe, and Israel will be randomized to MVP or VVI 40 pacing after successful implantation of a dual-chamber ICD. Heart failure therapies will be optimized in accordance with evidence-based guidelines. Prespecified secondary endpoints will include ventricular arrhythmias, atrial fibrillation, new indication for bradycardia pacing, health-related quality of life, and cost effectiveness. Enrollment began in October 2004 and concluded in April 2006. The study will be terminated upon recommendation of the Data Monitoring Committee or when the last patient enrolled and surviving has reached a minimum 2 years of follow-up. The MVP Trial will meet the clinical need for carefully designed prospective studies to define the benefits of atrial-based dual-chamber minimal ventricular pacing versus single-chamber ventricular pacing in conventional ICD patients.

  16. Creaming and Parking in Quasi-Marketised Welfare-to-Work Schemes: Designed Out Of or Designed In to the UK Work Programme?

    Science.gov (United States)

    Carter, Eleanor; Whitworth, Adam

    2015-04-01

    'Creaming' and 'parking' are endemic concerns within quasi-marketised welfare-to-work (WTW) systems internationally, and the UK's flagship Work Programme for the long-term unemployed is something of an international pioneer of WTW delivery, based on outsourcing, payment by results and provider flexibility. In the Work Programme design, providers' incentives to 'cream' and 'park' differently positioned claimants are intended to be mitigated through the existence of nine payment groups (based on claimants' prior benefit type) into which different claimants are allocated and across which job outcome payments for providers differ. Evaluation evidence suggests however that 'creaming' and 'parking' practices remain common. This paper offers original quantitative insights into the extent of claimant variation within these payment groups, which, contrary to the government's intention, seem more likely to design in rather than design out 'creaming' and 'parking'. In response, a statistical approach to differential payment setting is explored and is shown to be a viable and more effective way to design a set of alternative and empirically grounded payment groups, offering greater predictive power and value-for-money than is the case in the current Work Programme design.

  17. How to use programme theory to evaluate the effectiveness of schemes designed to improve the work environment in small businesses.

    Science.gov (United States)

    Olsen, Kirsten; Legg, Stephen; Hasle, Peter

    2012-01-01

    Due to the many constraints that small businesses (SBs) face in meeting legislative requirements, occupational health and safety (OHS) regulatory authorities and other OSH actors have developed programmes which can reach out to SBs and motivate and assist them in improving the work environment. A number of conceptual models help to enhance our understanding of OHS interventions in SBs and their effectiveness. However, they have mainly been evaluated on output rather than the process relating to the change theory underlying the intervention, and hence have seldom been rigorously evaluated. Thus little is known about how particular features of SBs can be taken into account when designing and implementing national programmes. This paper shows how realist analysis and programme theory may be used as a framework for evaluating, developing and improving national intervention programmes for the improvement of the work environment and reducing injuries in SBs. It illustrates this for a specific New Zealand intervention: the Workplace Safety Discount scheme and its implementation in the agriculture sector. In practice, realist analysis should be performed during the planning, implementation and management stages so that ongoing findings can be fed back to the participant social actors to help them make appropriate changes to enhance the likelihood of success.

  18. Revitalising the Metropolit 1953 Danish male birth cohort: background, aims and design

    DEFF Research Database (Denmark)

    Osler, Merete; Andersen, Anne-Marie Nybo; Lund, Rikke

    2004-01-01

    mobility. At age 12 years, 9537 of these cohort members completed a questionnaire in school, which included cognitive measures and information on social aspirations and leisure time activities. In 1966 educational performance tests were administered for these boys and, in 1968, mothers of 2890 cohort......Recent research indicates that factors operating during childhood are related to adult health. Thus, longitudinal studies with information on subsequent phases may be key to understanding later health outcomes. The main objective of this paper is to describe the history and design of a Danish birth...... cohort, and its revitalisation. In 1965, information from birth certificates for 11 591 of a total of 12 270 males born in 1953 in the Metropolitan area of Copenhagen, Denmark were traced. These boys were the study population of a sociological investigation conducted with the aim of describing social...

  19. A Cohort Study on Long-Term Adverse Effects of Parental Drinking: Background and Study Design

    Directory of Open Access Journals (Sweden)

    Ingunn Olea Lund

    2015-01-01

    Full Text Available Although many studies have addressed adverse outcomes in children of parents with alcohol abuse/dependence, less is known about the possible long-term effects of more normative patterns of parental alcohol consumption, including drinking at lower risk levels and heavy episodic or binge drinking. The extent of harm from parental drinking may therefore be underestimated. With this research proposal, we describe a project that aims to assess possible long-term adverse effects of parental drinking by combining survey and nationwide registry data. Advantages of a longitudinal general population cohort design include that it allows for detailed information on parental drinking through survey data and identification of possible negative long-term health and social outcomes from exposure to parental drinking 1–19 years after exposure through continuously updated nationwide registers. The rich information available from combining survey and registry data allows us to take into account important confounders, mediators, and moderators.

  20. Student Preferences and Expectations: Some Practical Tips for Designers of English Enhancement Programmes

    Science.gov (United States)

    Yeung, Marine; Li, Tilo

    2018-01-01

    As one of the essential skills for success in work and studies, English communication is often made a key component in the GE curriculum of tertiary study programmes. In addition to the provision of required English proficiency courses, many tertiary institutions have established English centres of some description to promote English learning on…

  1. Global Engineering Teams--A Programme Promoting Teamwork in Engineering Design and Manufacturing

    Science.gov (United States)

    Oladiran, M. T.; Uziak, J.; Eisenberg, M.; Scheffer, C.

    2011-01-01

    Engineering graduates are expected to possess various competencies categorised into hard and soft skills. The hard skills are acquired through specific coursework, but the soft skills are often treated perfunctorily. Global Engineering Teams (GET) is a programme that promotes project-oriented tasks in virtual student teams working in collaboration…

  2. Final Report and Documentation for the PLD11 Multipurpose Programmable Logic VME Board Design

    International Nuclear Information System (INIS)

    Hutchinson, Robert L.; Pierson, Lyndon G.; Robertson, Perry J.; Tarman, Thomas D.; Witzke, Edward L.

    1999-01-01

    The PLD11 board is a 9U VME board containing 11 Altera 10K100 Programmable Logic Devices, controlled impedance clock tree, VME interface, programming inteface, 0C3 (155 Mbps) interface and serial port. The 11 Altera 10K100 Programmable Logic Devices arranged to provide four 96 bit wide buses for a total of 384 parallel digital data lines in and out of the board that can operate up to 100 Mhz for a aggrigate throughput of 38.4 Gpbs. The 14.44'' X 15.75'' board has over 1.1 million programmable gates that can be programmed through a serial interace. The board contains a clock reference and 50 ohm clock distribution tree that can drive each of the eleven 10K100 devices with two critically timed clock references. Five external clock references can be used to drive five additional PLD 11 boards for a total of six boards operating all from the same synchronous clock reference. A system of six boards provides just under 7 million programmable gates

  3. Design and Operation of Cryogenic Distillation Research Column for Ultra-Low Background Experiments

    Science.gov (United States)

    Chiller, Christopher; Alanson Chiller, Angela; Jasinski, Benjamin; Snyder, Nathan; Mei, Dongming

    2013-04-01

    Motivated by isotopically enriched germanium (76Ge and 73Ge) for monocrystalline crystal growth for neutrinoless double-beta decay and dark matter experiments, a cryogenic distillation research column was developed. Without market availability of distillation columns in the temperature range of interest with capabilities necessary for our purposes, we designed, fabricated, tested, refined and operated a two-meter research column for purifying and separating gases in the temperature range from 100-200K. Due to interest in defining stratification, purity and throughput optimization, capillary lines were integrated at four equidistant points along the length of the column such that real-time residual gas analysis could guide the investigation. Interior gas column temperatures were monitored and controlled within 0.1oK accuracy at the top and bottom. Pressures were monitored at the top of the column to four significant figures. Subsequent impurities were measured at partial pressures below 2E-8torr. We report the performance of the column in this paper.

  4. Driver-Array Based Flat-Panel Loudspeakers: Theoretical Background and Design Guidelines

    Science.gov (United States)

    Anderson, David Allan

    This thesis relates to the simulation and design of flat-panel loudspeakers using moving-coil driver elements. A brief history of the industry is given, including a collection of products and patents from 1925 until the present, an overview of research papers, and a discussion of current products available. The mechanics of bending flat panels are developed with respect to localized driving forces, both in the frequency domain and the time domain as an impulse response. These simulations are compared to measurements on prototype panels. Additional resonant elements influence the behavior of the system: an optional ported rear enclosure and the resonant characteristics of the drivers. The governing equations for these systems are derived and solutions are implemented using equivalent mechanical circuits and numerical methods. The idea of using driver arrays to independently actuate modes of the panel is discussed at length with respect to modal addressability, modal spillover, and experimental validation. The numerical approach to determining the optimal driver placement for a given set of modes is derived and experimentally validated. An investigation of the acoustic behavior of flat panel loudspeakers is presented, using mechanical simulation results to predict the acoustic radiation. The simulations are compared to measurements and found to accurately predict important mechanical and acoustical behaviors. It is demonstrated that a driver array, with the proper biasing, is capable of creating a flat panel loudspeaker which acts more like a piston than a "diffuse radiator" flat panel loudspeaker. The techniques of "Modal Crossover Networks" are introduced, which use multi-band filters to bias the driver array differently for different frequency bands, optimized for audio reproduction. The question of how many drivers are necessary for a modal crossover network is addressed and found to be dependent on the estimated quality factor (Q) of the panel material and edge

  5. Process, background and design criteria of the gas cleaning at Puertollano IGCC

    Energy Technology Data Exchange (ETDEWEB)

    Pisa, J. [Elcogas, Madrid (Spain)

    1998-11-01

    The Puertollano IGCC plant selected cooling by a water-tube boiler with upstream quenching at high velocities that requires a dust-free cooling gas at not less than 250{degree}C in order not to penalise the heat recovery efficiency. A filtration system for gas dedusting in the 250{degree}C temperature range has been installed and will be commissioned at the end of 1997. The gas cleaning concept is completed with a Venturi Scrubber, a COS hydrolysis reactor and a MDEA column to strip the sulphuric acid to yield clean gas. The gasification island is based upon the PRENFLO system which is an entrained-flow system with dry feeding. The selection of the filter system arrangement considered the limited operational experience in comparable operating conditions and acknowledged the flexibility of the filter system versus the cyclone-scrubber as far as easier load variation operation, the reduction of residues needing deposition and increased slag flow, as well as easier maintenance. Additionally to the ceramic test filters in Furstenhausen (PRENFLO) and Deer Park near Houston (SHELL), ceramic candle-type filter were selected in Buggenum and at Wabash River, and for the KoBra plant. The main criteria for the selection of the filter system and the type of candle were: separation efficiency to match clean gas limits; uniform distribution of the dust-laden gas to the filters; wear-resistant routing of the dust-laden gas flow; need for a supporting structure which must cope with sudden pressure fluctuations; optimised pulse gas system; and maintenance and repair. Based upon the above criteria, the PRENFLO concept requirements and the gas turbine specification, an arrangement with two pressure filter vessels with LLB design and filter elements manufactured by Schumacher has been installed in Puertollano. 2 figs., 3 tabs.

  6. SR 97 - Waste, repository design and sites. Background report to SR 97 SKB

    International Nuclear Information System (INIS)

    1999-10-01

    SR 97 is a comprehensive analysis of long-term safety of a deep repository for spent nuclear fuel. The repository is assumed to be designed according to the KBS-3 method. Assessments are performed in SR 97 for three fictitious sites: Aberg, Beberg and Ceberg. One premise is that data used for assessment of the fictitious sites are to be taken from sites that have previously been investigated. The spent nuclear fuel is enclosed in copper canisters with an insert of cast iron. The canisters are emplaced in bored holes in the floor of the deposition tunnels. Around each canister, bentonite blocks are stacked which, after absorbing water and swelling, will isolate the canister from groundwater, hold the canister in place and retard transport of radionuclides from the canister to the surrounding rock. The spent nuclear fuel will emit heat for a long time, due to the decay heat. The maximum permissible temperature on the canister surface has been chosen at 100 deg C. The spacing between the deposition holes and between the deposition tunnels is adjusted site-specifically to meet this requirement. The thermal properties of the rock and the buffer material are of importance for how closely the deposition holes and tunnels can be spaced. After deposition, the deposition tunnels are backfilled with a mixture of bentonite and crushed rock. SR 97 examines above all the consequences of various scenarios and the handling of various types of uncertainties. The different repository sites illustrate normal properties for Swedish bedrock which are of importance for safety. To facilitate the work, the repositories on the three sites are configured as similarly as possible, which means for example that they are located at roughly the same depth and are fitted into the bedrock in a relatively similar fashion. Apart from the siting of a repository for spent nuclear fuel, the site may need to house a separate repository for other long-lived waste. This possibility has been considered in

  7. SR 97 - Waste, repository design and sites. Background report to SR 97 SKB

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-10-01

    SR 97 is a comprehensive analysis of long-term safety of a deep repository for spent nuclear fuel. The repository is assumed to be designed according to the KBS-3 method. Assessments are performed in SR 97 for three fictitious sites: Aberg, Beberg and Ceberg. One premise is that data used for assessment of the fictitious sites are to be taken from sites that have previously been investigated. The spent nuclear fuel is enclosed in copper canisters with an insert of cast iron. The canisters are emplaced in bored holes in the floor of the deposition tunnels. Around each canister, bentonite blocks are stacked which, after absorbing water and swelling, will isolate the canister from groundwater, hold the canister in place and retard transport of radionuclides from the canister to the surrounding rock. The spent nuclear fuel will emit heat fora long time, due to the decay heat. The maximum permissible temperature on the canister surface has been chosen at 100 deg C. The spacing between the deposition holes and between the deposition tunnels is adjusted site-specifically to meet this requirement. The thermal properties of the rock and the buffer material are of importance for how closely the deposition holes and tunnels can be spaced. After deposition, the deposition tunnels are backfilled with a mixture of bentonite and crushed rock. SR 97 examines above all the consequences of various scenarios and the handling of various types of uncertainties. The different repository sites illustrate normal properties for Swedish bedrock which are of importance for safety. To facilitate the work, the repositories on the three sites are configured as similarly as possible, which means for example that they are located at roughly the same depth and are fitted into the bedrock in a relatively similar fashion. Apart from the siting of a repository for spent nuclear fuel, the site may need to house a separate repository for other long-lived waste. This possibility has been considered in

  8. System design and installation for RS600 programmable control system for solar heating and cooling

    Science.gov (United States)

    1978-01-01

    Procedures for installing, operating, and maintaining a programmable control system which utilizes a F8 microprocessor to perform all timing, control, and calculation functions in order to customize system performance to meet individual requirements for solar heating, combined heating and cooling, and/or hot water systems are described. The manual discusses user configuration and options, displays, theory of operation, trouble-shooting procedures, and warranty and assistance. Wiring lists, parts lists, drawings, and diagrams are included.

  9. Framework programmable platform for the advanced software development workstation. Integration mechanism design document

    Science.gov (United States)

    Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Reddy, Uday; Ackley, Keith; Futrell, Mike

    1991-01-01

    The Framework Programmable Software Development Platform (FPP) is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software development environment. Guided by this model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated.

  10. Mental health promotion in the Internet age: a consultation with Australian young people to inform the design of an online mindfulness training programme.

    Science.gov (United States)

    Monshat, Kaveh; Vella-Brodrick, Dianne; Burns, Jane; Herrman, Helen

    2012-06-01

    Mindfulness training (MT) has been shown to lead to significant improvements in psychological distress and emotion regulation skills. The Internet has many advantages as a medium for building emotional skills in young people. The aim of this study was to involve young people in designing an online MT programme. A draft programme was initially designed based on a review of the literature and an established face-to-face programme for medical students. Twenty young people were then recruited through online advertising and 13 (age 16-26) interviewed. They were asked to comment on how useful, easy to use and enjoyable they found the proposed programme and how the draft version and its planned evaluation strategy could be improved. Interviewee responses were independently processed by two of the authors within a qualitative thematic analysis paradigm. The results showed that young people were eager to engage with the design of this health promotion programme and provided valuable input. All interviewees believed that young people would find the programme desirable. They provided a variety of suggestions about how training structure and content could be improved, how best it could be evaluated and how young people could be encouraged to engage with and complete the programme. It thus appears that online MT is a feasible mental health promotion strategy for young people and that it can be evaluated in a controlled trial. The result of this consultation process was the Mindful Awareness Training and Education (MATE) programme, which has been detailed.

  11. The role of intermediaries in delivering an occupational health and safety programme designed for small business - a case study of an insurance incentive programme in the agriculture sector

    DEFF Research Database (Denmark)

    Olsen, Kirsten Bendix; Hasle, Peter

    2015-01-01

    to the transformation and dissemination of a national OHS programme for small business that built on an Insurance incentive scheme – the New Zealand Workplace Safety Discount scheme. It is a case study of this scheme implementation in the agriculture sector. Data was collected from scheme documentation and semi......-structured interviews with the scheme owner, representatives from intermediary groups and the targeted small businesses. The interviews were tape recorded, transcribed and thematically analysed in relation to the scheme’s programme theory. The intermediaries introduced new programme mechanisms and recruitment...

  12. Why a carefully designed, nurse-led intervention failed to meet expectations : The case of the Care Programme for Palliative Radiotherapy

    NARCIS (Netherlands)

    Vahedi Nikbakht-van de Sande, C.V.; Braat, C.; Vissers, A.P.; Delnoij, D.; Staa, A.L.

    2014-01-01

    Purpose of the research Implement and evaluate the Care Programme for Palliative Radiotherapy (CPPR) in the Outpatient Clinic of the Department of Radiotherapy, Erasmus MC-Cancer Institute, Rotterdam, The Netherlands. Methods Participatory Action Research (PAR). Qualitative descriptive design:

  13. Autogenic-Feedback Training (AFT) as a preventive method for space motion sickness: Background and experimental design

    Science.gov (United States)

    Cowings, Patricia S.; Toscano, William B.

    1993-01-01

    Finding an effective treatment for the motion sickness-like symptoms that occur in space has become a high priority for NASA. The background research is reviewed and the experimental design of a formal life sciences shuttle flight experiment designed to prevent space motion sickness in shuttle crew members is presented. This experiment utilizes a behavioral medicine approach to solving this problem. This method, Autogenic-Feedback Training (AFT), involves training subjects to voluntarily control several of their own physiological responses to environmental stressors. AFT has been used reliably to increase tolerance to motion sickness during ground-based tests in over 200 men and women under a variety of conditions that induce motion sickness, and preliminary evidence from space suggests that AFT may be an effective treatment for space motion sickness as well. Proposed changes to this experiment for future manifests are included.

  14. Versatile pulse programmer for pulsed nuclear magnetic resonance spectroscopy

    International Nuclear Information System (INIS)

    Adduci, D.J.

    1979-05-01

    A description of the sequence of events and the decisions leading to the design of a versatile pulse programmer for pulsed NMR are presented. Background and application information is discussed in order that the reader might better understand the role of the pulse programmer in a NMR spectrometer. Various other design approaches are presented as a basis for comparison. Specifications for this design are proposed, the hardware implementation of the specifications is discussed, and the software operating system is presented

  15. Versatile pulse programmer for pulsed nuclear magnetic resonance spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Adduci, D.J.

    1979-05-01

    A description of the sequence of events and the decisions leading to the design of a versatile pulse programmer for pulsed NMR are presented. Background and application information is discussed in order that the reader might better understand the role of the pulse programmer in a NMR spectrometer. Various other design approaches are presented as a basis for comparison. Specifications for this design are proposed, the hardware implementation of the specifications is discussed, and the software operating system is presented.

  16. Planning and Design Considerations for Geological Repository Programmes of Radioactive Waste

    International Nuclear Information System (INIS)

    2014-11-01

    Disposal in a geological repository is the generally accepted solution for the long term management of high level and/or long lived radioactive wastes, in line with the general principles defined in the IAEA Safety Fundamentals. This publication presents practical information on the way a geological repository programme for radioactive waste could be defined and planned, with special attention to all aspects having an impact on the timing. Country specific examples for repository development phases are provided, based on actual experiences from Member States

  17. Design of the M&S acquisition support effort of the SANDF GBADS acquisition programme

    CSIR Research Space (South Africa)

    Nel, JJ

    2007-06-01

    Full Text Available (AmADS) GBADS Phase 2 (MobADS) GBADS Phase 3 (LmADS) GBADS Phase 4 (C2 Optimisation) GBADS Phase 5 (MecADS) Figure 1: GBADS Phased Acquisition. The acquisition programme comprises five phases each addressing the acquisition of a specific... element of the GBADS. Phase 1 addresses an Air-mobile Air Defence System (AmADS) utilising man-portable missiles that can also be employed as a component of a Mobile Air Defence System (MobADS). Phase 2 involves the acquisition of the remainder...

  18. Designing the Expanded Programme on Immunisation (EPI) as a service: Prioritising patients over administrative logic

    DEFF Research Database (Denmark)

    McKnight, J.; Holt, D. B.

    2014-01-01

    -the-ground problems that mothers face in trying to vaccinate their children, while instead prioritising administrative processes. Our ethnographic analysis of 83 mothers who had not vaccinated their children reveals key barriers to vaccination from a 'customer' perspective. While mothers value vaccination......Expanded Programme on Immunisation (EPI) vaccination rates remain well below herd immunity in regions of many countries despite huge international resources devoted to both financing and access. We draw upon service marketing theory, organisational sociology, development anthropology and cultural...... specific service problems from the mother's perspective and points towards simple service innovations that could improve vaccination rates in regions that have poor uptake....

  19. An Appraisal of Female Sex Work in Nigeria - Implications for Designing and Scaling Up HIV Prevention Programmes

    Science.gov (United States)

    Ikpeazu, Akudo; Momah-Haruna, Amaka; Madu Mari, Baba; Thompson, Laura H.; Ogungbemi, Kayode; Daniel, Uduak; Aboki, Hafsatu; Isac, Shajy; Gorgens, Marelize; Mziray, Elizabeth; Njie, Ndella; Akala, Francisca Ayodeji; Emmanuel, Faran; Odek, Willis Omondi; Blanchard, James F.

    2014-01-01

    Background The HIV epidemic in Nigeria is complex with diverse factors driving the epidemic. Accordingly, Nigeria's National Agency for the Control of AIDS is coordinating a large-scale initiative to conduct HIV epidemic appraisals across all states. These appraisals will help to better characterize the drivers of the epidemic and ensure that the HIV prevention programmes match the local epidemic context, with resources allocated to interventions that have the greatest impact locally. Currently, the mapping and size estimation of Female Sex Workers (FSWs) - a major component of the appraisal has been completed in seven states. These states are using the data generated to plan, prioritize and scale-up sub-national HIV prevention programmes. Methodology It involved a two-level process of identifying and validating locations where FSWs solicit and/or meet clients (“hotspots”). In the first level, secondary key informants were interviewed to collect information about the geographic location and description of the hotspots. For the second level, FSWs were interviewed at each hotspot and information on population size estimates, typologies and operational dynamics of the FSWs were collected. Results Across the seven states, a total of 17,266 secondary key informants and 5,732 FSWs were interviewed. 10,233 hotspots were identified with an estimated 126,489 FSWs ranging from 5,920 in Anambra to 46,691 in Lagos. The most common hotspots were bars/nightclubs (30%), hotels/lodges (29.6%), streets (16.6%), and brothels (14.6%). Furthermore, the population density of FSWs (per thousand adult men) across the states ranged from 2 in Anambra to 17 in the Federal Capital Territory. Conclusion FSW populations in Nigeria are large and diverse, with substantial differences between and within states. Improved understanding of the location, population size, density, organizational typologies and clients of sex work has informed and is central to Nigeria's planning process for

  20. An appraisal of female sex work in Nigeria--implications for designing and scaling up HIV prevention programmes.

    Directory of Open Access Journals (Sweden)

    Akudo Ikpeazu

    Full Text Available BACKGROUND: The HIV epidemic in Nigeria is complex with diverse factors driving the epidemic. Accordingly, Nigeria's National Agency for the Control of AIDS is coordinating a large-scale initiative to conduct HIV epidemic appraisals across all states. These appraisals will help to better characterize the drivers of the epidemic and ensure that the HIV prevention programmes match the local epidemic context, with resources allocated to interventions that have the greatest impact locally. Currently, the mapping and size estimation of Female Sex Workers (FSWs--a major component of the appraisal has been completed in seven states. These states are using the data generated to plan, prioritize and scale-up sub-national HIV prevention programmes. METHODOLOGY: It involved a two-level process of identifying and validating locations where FSWs solicit and/or meet clients ("hotspots". In the first level, secondary key informants were interviewed to collect information about the geographic location and description of the hotspots. For the second level, FSWs were interviewed at each hotspot and information on population size estimates, typologies and operational dynamics of the FSWs were collected. RESULTS: Across the seven states, a total of 17,266 secondary key informants and 5,732 FSWs were interviewed. 10,233 hotspots were identified with an estimated 126,489 FSWs ranging from 5,920 in Anambra to 46,691 in Lagos. The most common hotspots were bars/nightclubs (30%, hotels/lodges (29.6%, streets (16.6%, and brothels (14.6%. Furthermore, the population density of FSWs (per thousand adult men across the states ranged from 2 in Anambra to 17 in the Federal Capital Territory. CONCLUSION: FSW populations in Nigeria are large and diverse, with substantial differences between and within states. Improved understanding of the location, population size, density, organizational typologies and clients of sex work has informed and is central to Nigeria's planning

  1. A Novel Mu Rhythm-based Brain Computer Interface Design that uses a Programmable System on Chip.

    Science.gov (United States)

    Joshi, Rohan; Saraswat, Prateek; Gajendran, Rudhram

    2012-01-01

    This paper describes the system design of a portable and economical mu rhythm based Brain Computer Interface which employs Cypress Semiconductors Programmable System on Chip (PSoC). By carrying out essential processing on the PSoC, the use of an extra computer is eliminated, resulting in considerable cost savings. Microsoft Visual Studio 2005 and PSoC Designer 5.01 are employed in developing the software for the system, the hardware being custom designed. In order to test the usability of the BCI, preliminary testing is carried out by training three subjects who were able to demonstrate control over their electroencephalogram by moving a cursor present at the center of the screen towards the indicated direction with an average accuracy greater than 70% and a bit communication rate of up to 7 bits/min.

  2. Disposal of spent fuel in Olkiluoto bedrock. Programme for research, development and technical design for the pre-construction phase

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-12-01

    The spent fuel from the nuclear power plants at Olkiluoto and Loviisa will be disposed of in Finnish bedrock. Posiva aims at starting the construction of the disposal facility in the 2010's and the actual disposal operations in 2020. In May 1999 Posiva submitted an application for the so-called Decision-in-Principle (DiP) on the facility to the Finnish Government. According to the application the repository would be based on a KBS-3 type concept and sited at Olkiluoto. The application was approved by the Government in December 2000 and will go next to the Parliament for final approval. However, Posiva has already started the planning for the next programme phase on the assumption that a positive decision will be made. The purpose of the present document is to describe the objectives and major items of research, development, technical planning and design work for the period preceding the construction license. According to the current official guidelines Posiva should prepare for submitting the application for the license in 2010. For the technical development and design work the main target for the starting programme phase is to reach the maturity of design and technical plans that allows the specification of work packages for bid calls and gives sufficient confidence in the technical feasibility of planned operations at the encapsulation facility and in the repository. The main objectives for the complementary characterisation work at Olkiluoto consist of the verification of the present conclusions on site suitability, the definition and identification of suitable rock volumes for repository space and the characterisation of the target host rock for repository design, safety assessment and planning of construction work. The technical design and demonstration work together with the results of complementary site characterisation will provide the basis of the safety case prepared as the support for the construction license application. An integrated safety

  3. Disposal of spent fuel in Olkiluoto bedrock. Programme for research, development and technical design for the pre-construction phase

    International Nuclear Information System (INIS)

    2000-12-01

    The spent fuel from the nuclear power plants at Olkiluoto and Loviisa will be disposed of in Finnish bedrock. Posiva aims at starting the construction of the disposal facility in the 2010's and the actual disposal operations in 2020. In May 1999 Posiva submitted an application for the so-called Decision-in-Principle (DiP) on the facility to the Finnish Government. According to the application the repository would be based on a KBS-3 type concept and sited at Olkiluoto. The application was approved by the Government in December 2000 and will go next to the Parliament for final approval. However, Posiva has already started the planning for the next programme phase on the assumption that a positive decision will be made. The purpose of the present document is to describe the objectives and major items of research, development, technical planning and design work for the period preceding the construction license. According to the current official guidelines Posiva should prepare for submitting the application for the license in 2010. For the technical development and design work the main target for the starting programme phase is to reach the maturity of design and technical plans that allows the specification of work packages for bid calls and gives sufficient confidence in the technical feasibility of planned operations at the encapsulation facility and in the repository. The main objectives for the complementary characterisation work at Olkiluoto consist of the verification of the present conclusions on site suitability, the definition and identification of suitable rock volumes for repository space and the characterisation of the target host rock for repository design, safety assessment and planning of construction work. The technical design and demonstration work together with the results of complementary site characterisation will provide the basis of the safety case prepared as the support for the construction license application. An integrated safety assessment

  4. Design of a logic and programmable controller based on the motorola microcontroller

    Directory of Open Access Journals (Sweden)

    Wilson Javier Pérez-Holguín

    2006-12-01

    Full Text Available This article, present the results archieved in the design of a PLC based on a microcontroller. using the norms of electromagnetic compatibility. A design of sofware and hardware was carried out and this design was implemented in an industrial atmosphere, obtaining very good results, in front of the electromagnetic noise characteristic of the industrial atmosphere.

  5. Design of the driving system for visible near-infrared spatial programmable push-broom remote CCD sensor

    Science.gov (United States)

    Xu, Zhipeng; Wei, Jun; Zhou, Qianting; Weng, Dongshan; Li, Jianwei

    2010-11-01

    VNIR multi-spectral image sensor has wide applications in remote sensing and imaging spectroscopy. An image spectrometer of a spatial remote programmable push-broom sensing satellite requires visible near infrared band ranges from 0.4μm to 1.04μm which is one of the most important bands in remote sensing. This paper introduces a method of design the driving system for 1024x1024 VNIR CCD sensor for programmable push-broom remote sensing. The digital driving signal is generated by the FPGA device. There are seven modules in the FPGA program and all the modules are coded by VHDL. The driving system have five mainly functions: drive the sensor as the demand of timing schedule, control the AD convert device to work, get the parameter via RS232 from control platform, process the data input from the AD device, output the processed data to PCI sample card to display in computer end. All the modules above succeed working on FPGA device APA600. This paper also introduced several important keys when designing the driving system including module synchronization, critical path optimization.

  6. Design and Implementation of Video Shot Detection on Field Programmable Gate Arrays

    Directory of Open Access Journals (Sweden)

    Jharna Majumdar

    2012-09-01

    Full Text Available Video has become an interactive medium of communication in everyday life. The sheer volume of video makes it extremely difficult to browse through and find the required data. Hence extraction of key frames from the video which represents the abstract of the entire video becomes necessary. The aim of the video shot detection is to find the position of the shot boundaries, so that key frames can be selected from each shot for subsequent processing such as video summarization, indexing etc. For most of the surveillance applications like video summery, face recognition etc., the hardware (real time implementation of these algorithms becomes necessary. Here in this paper we present the architecture for simultaneous accessing of consecutive frames, which are then used for the implementation of various Video Shot Detection algorithms. We also present the real time implementation of three video shot detection algorithms using the above mentioned architecture on FPGA (Field Programmable Gate Arrays.

  7. Adaption of the radiation dose for computed tomography of the body - back-ground for the dose adaption programme OmnimAs; Straaldosreglering vid kroppsdatortomografi - bakgrund till dosregleringsprogrammet OmnimAs

    Energy Technology Data Exchange (ETDEWEB)

    Nyman, Ulf; Kristiansson, Mattias [Trelleborg Hospital (Sweden); Leitz, Wolfram [Swedish Radiation Protection Authority, Stockholm (Sweden); Paahlstorp, Per-Aake [Siemens Medical Solutions, Solna (Sweden)

    2004-11-01

    When performing computed tomography examinations the exposure factors are hardly ever adapted to the patient's size. One reason for that might be the lack of simple methods. In this report the computer programme OmnimAs is described which is calculating how the exposure factors should be varied together with the patient's perimeter (which easily can be measured with a measuring tape). The first approximation is to calculate the exposure values giving the same noise levels in the image irrespective the patient's size. A clinical evaluation has shown that this relationship has to be modified. One chapter is describing the physical background behind the programme. Results calculated with OmnimAs are in good agreement with a number of published studies. Clinical experiences are showing the usability of OmnimAs. Finally the correlation between several parameters and image quality/dose is discussed and how this correlation can be made use of for optimising CT-examinations.

  8. A programme to reduce down-time and site radiation dose through improvements in control rod design

    International Nuclear Information System (INIS)

    Izatt, J.A.; Scobie, J.

    1985-01-01

    On the UTR-300 reactor at SURRC, it has been found necessary to carry out preventive or remedial maintenance at least once per year on the in-core elements of the control rod assemblies. This has led to reduced availability of the reactor and to significant overall radiation doses to the few long-serving staff members who carry out this work. In an attempt to reduce down-time and radiation dose to staff a radical re-design of the control assemblies was undertaken in-house, and a conversion programme has been underway over the last four years. Details of the design improvements are presented together with a discussion of the operating experience to date. (author)

  9. Heart failure programmes in countries with a primary care-based health care system. Are additional trials necessary? Design of the DEAL-HF study

    NARCIS (Netherlands)

    de la Porte, PWFBA; Lok, DJA; van Wijngaarden, J; Cornel, JH; Pruijsers-Lamers, D; van Veldhuisen, DJ; Hoes, AW

    Background: Several randomised studies of heart failure (HF) management programmes in the United States, Australia and Europe have shown a considerable reduction in hospitalisation rates for HE In this article, a comprehensive review of these studies will be provided and their applicability to

  10. Design of a process evaluation of the implementation of a physical activity and sports stimulation programme in Dutch rehabilitation setting : ReSpAct

    NARCIS (Netherlands)

    Hoekstra, Femke; Alingh, Roelina; van der Schans, Cees; Hettinga, Florentina; Duijff, Marjo; Dekker, Rienk; van der Woude, Lucas H.V.

    2014-01-01

    Background There is a growing interest to study the transfer of evidence-based information into daily practice. The evidence-based programme Rehabilitation, Sports and Exercise (RSE) that aims to stimulate an active lifestyle during and after a rehabilitation period in people with a disability

  11. Study design of 'FRIENDS for Life': process and effect evaluation of an indicated school-based prevention programme for childhood anxiety and depression

    NARCIS (Netherlands)

    Kosters, M.; Chin A Paw, M.J.M.; Zwaanswijk, M.; van der Wal, M.F.; Utens, E.M.W.J.; Koot, H.M.

    2012-01-01

    Background: Anxiety disorders and depression are highly prevalent in children and affect their current and future functioning. 'FRIENDS for Life' is a cognitive-behavioural programme teaching children skills to cope more effectively with feelings of anxiety and depression. Although 'FRIENDS for

  12. Surveying the citizen science landscape: an exploration of the design, delivery and impact of citizen science through the lens of the Open Air Laboratories (OPAL) programme.

    Science.gov (United States)

    Davies, Linda; Fradera, Roger; Riesch, Hauke; Lakeman-Fraser, Poppy

    2016-07-22

    This paper provides a short introduction to the topic of citizen science (CS) identifying the shift from the knowledge deficit model to more inclusive, participatory science. It acknowledges the benefits of new technology and the opportunities it brings for mass participation and data manipulation. It focuses on the increase in interest in CS in recent years and draws on experience gained from the Open Air Laboratories (OPAL) programme launched in England in 2007. The drivers and objectives for OPAL are presented together with background information on the partnership, methods and scales. The approaches used by researchers ranged from direct public participation in mass data collection through field surveys to research with minimal public engagement. The supporting services focused on education, particularly to support participants new to science, a media strategy and data services. Examples from OPAL are used to illustrate the different approaches to the design and delivery of CS that have emerged over recent years and the breadth of opportunities for public participation the current landscape provides. Qualitative and quantitative data from OPAL are used as evidence of the impact of CS. While OPAL was conceived ahead of the more recent formalisation of approaches to the design, delivery and analysis of CS projects and their impact, it nevertheless provides a range of examples against which to assess the various benefits and challenges emerging in this fast developing field.

  13. Marathon Kids UK: study design and protocol for a mixed methods evaluation of a school-based running programme

    Science.gov (United States)

    Routen, Ash C; Harris, Jo P; Cale, Lorraine A; Gorely, Trish; Sherar, Lauren B

    2018-01-01

    Introduction Schools are promising settings for physical activity promotion; however, they are complex and adaptive systems that can influence the quality of programme implementation. This paper presents an evaluation of a school-based running programme (Marathon Kids). The aims of this study are (1) to identify the processes by which schools implement the programme, (2) identify and explain the contextual factors affecting implementation and explications of effectiveness and (3) examine the relationship between the level of implementation and perceived outcomes. Methods Using a realist evaluation framework, a mixed method single-group before-and-after design, strengthened by multiple interim measurements, will be used. Year 5 (9–10 years old) pupils and their teachers will be recruited from six state-funded primary schools in Leicestershire, UK. Data will be collected once prior to implementation, at five discrete time points during implementation and twice following implementation. A weekly implementation log will also be used. At time point 1 (TP1) (September 2016), data on school environment, teacher and pupil characteristics will be collected. At TP1 and TP6 (July 2017), accelerometry, pupil self-reported physical activity and psychosocial data (eg, social support and intention to be active) will be collected. At TP2, TP3 and TP5 (January, March and June 2017), observations will be conducted. At TP2 and TP5, there will be teacher interviews and pupil focus groups. Follow-up teacher interviews will be conducted at TP7 and TP8 (October 2017 and March 2018) and pupil focus group at TP8. In addition, synthesised member checking will be conducted (June 2018) with a mixed sample of schools. Ethics and dissemination Ethical approval for this study was obtained through Loughborough University Human Participants Ethics Subcommittee (R16-P032 & R16-P116). Findings will be disseminated via print, online media and dissemination events as well as practitioner and

  14. The Impact of Part-Time Staff on Art & Design Students' Ratings of Their Programmes

    Science.gov (United States)

    Yorke, Mantz

    2014-01-01

    Art & Design receives ratings on a number of scales of the UK's National Student Survey (NSS) that are less strong than those for some other subject areas. Art & Design, along with performing arts, is characterised by a relatively high level of part-time (PT) staffing. PT staffing data are set against NSS ratings for post-92 universities…

  15. English-Medium Programmes at Austrian Business Faculties: A Status Quo Survey on National Trends and a Case Study on Programme Design and Delivery

    Science.gov (United States)

    Unterberger, Barbara

    2012-01-01

    Internationalisation processes have accelerated the implementation of English-medium programmes (EMPs) across European higher education institutions. The field of business and management studies has been particularly affected by this trend (Wachter & Maiworm 2008: 46) with numerous new EMPs introduced each year. This paper presents key…

  16. The 2BFit study: is an unsupervised proprioceptive balance board training programme, given in addition to usual care, effective in preventing ankle sprain recurrences? Design of a Randomized Controlled Trial

    Directory of Open Access Journals (Sweden)

    van Mechelen Willem

    2008-05-01

    Full Text Available Abstract Background There is strong evidence that athletes have a twofold risk for re-injury after a previous ankle sprain, especially during the first year post-injury. These ankle sprain recurrences could result in disability and lead to chronic pain or instability in 20 to 50% of these cases. When looking at the high rate of ankle sprain recurrences and the associated chronic results, ankle sprain recurrence prevention is important. Objective To evaluate the effect of a proprioceptive balance board training programme on ankle sprain recurrences, that was applied to individual athletes after rehabilitation and treatment by usual care. Methods/Design This study was designed as a randomized controlled trial with a follow-up of one year. Healthy individuals between 12 and 70 years of age, who were actively participating in sports and who had sustained a lateral ankle sprain up to two months prior to inclusion, were eligible for inclusion in the study. The intervention programme was compared to usual care. The intervention programme consisted of an eight-week proprioceptive training, which started after finishing usual care and from the moment that sports participation was again possible. Outcomes were assessed at baseline and every month for 12 months. The primary outcome of this study was the incidence of recurrent ankle injuries in both groups within one year after the initial sprain. Secondary outcomes were severity and etiology of re-injury and medical care. Cost-effectiveness was evaluated from a societal perspective. A process evaluation was conducted for the intervention programme. Discussion The 2BFit trial is the first randomized controlled trial to study the effect of a non-supervised home-based proprioceptive balance board training programme in addition to usual care, on the recurrence of ankle sprains in sports. Results of this study could possibly lead to changes in practical guidelines on the treatment of ankle sprains. Results will

  17. Technological aspects of the NIRA steam generator design and experimental programme

    International Nuclear Information System (INIS)

    D'Alesio, C.; Di Leo, S.; Fossati, M.; Urbani, A.

    1975-01-01

    In this report are described the technological works concerned with the developing of the tube to tube sheet connection either welded or brazed. Both give satisfactory results with regard to their application to the S. G. design. (author)

  18. ACHESS – The Australian study of child health in same-sex families: background research, design and methodology

    Directory of Open Access Journals (Sweden)

    Crouch Simon

    2012-08-01

    Full Text Available Abstract Background There are an increasing number of children in Australia growing up with same-sex attracted parents. Although children from same-sex parent families do in general perform well on many psychosocial measures recent research is beginning to consider some small but significant differences when these children are compared with children from other family backgrounds. In particular studies suggest that there is an association between the stigma that same-sex parent families experience and child wellbeing. Research to date lacks a holistic view with the complete physical, mental and social wellbeing of children not yet addressed. In addition, most studies have focused only on families with lesbian parents and have studied only small numbers of children. Methods/design The Australian Study of Child Health in Same-Sex Families (ACHESS is a national study that aims to determine the complete physical, mental and social wellbeing of Australian children under the age 18 years with at least one parent who self identifies as being same-sex attracted. There will be a particular focus on the impact that stigma and discrimination has on these families. Parent and child surveys will be used to collect data and will be available both online and in paper form. Measures have been chosen whenever possible that have sound conceptual underpinnings, robust psychometric properties and Australian normative data, and include the Child Health Questionnaire (CHQ, the Strengths and Difficulties Questionnaire (SDQ and the Kessler Psychological Distress Scale (K10. Discussion ACHESS aims to be the largest study of its kind and will for the first time produce a detailed quantitative analysis of Australian children with same-sex attracted parents. By inviting participants to take part in further research it will also establish a valuable cohort of children, and their families, to launch future waves of research that will help us better understand the health and

  19. The (cost-effectiveness of an individually tailored long-term worksite health promotion programme on physical activity and nutrition: design of a pragmatic cluster randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Burdorf Alex

    2007-09-01

    Full Text Available Abstract Background Cardiovascular disease is the leading cause of disability and mortality in most Western countries. The prevalence of several risk factors, most notably low physical activity and poor nutrition, is very high. Therefore, lifestyle behaviour changes are of great importance. The worksite offers an efficient structure to reach large groups and to make use of a natural social network. This study investigates a worksite health promotion programme with individually tailored advice in physical activity and nutrition and individual counselling to increase compliance with lifestyle recommendations and sustainability of a healthy lifestyle. Methods/Design The study is a pragmatic cluster randomised controlled trial with the worksite as the unit of randomisation. All workers will receive a standard worksite health promotion program. Additionally, the intervention group will receive access to an individual Health Portal consisting of four critical features: a computer-tailored advice, a monitoring function, a personal coach, and opportunities to contact professionals at request. Participants are employees working for companies in the Netherlands, being literate enough to read and understand simple Internet-based messages in the Dutch language. A questionnaire to assess primary outcomes (compliance with national recommendations on physical activity and on fruit and vegetable intake will take place at baseline and after 12 and 24 months. This questionnaire also assesses secondary outcomes including fat intake, self-efficacy and self-perceived barriers on physical activity and fruit and vegetable intake. Other secondary outcomes, including a cardiovascular risk profile and physical fitness, will be measured at baseline and after 24 months. Apart from the effect evaluation, a process evaluation will be carried out to gain insight into participation and adherence to the worksite health promotion programme. A cost-effectiveness analysis and

  20. Referral from primary care to a physical activity programme: establishing long-term adherence? A randomized controlled trial. Rationale and study design

    Directory of Open Access Journals (Sweden)

    Puig-Ribera Anna

    2009-01-01

    Full Text Available Abstract Background Declining physical activity is associated with a rising burden of global disease. There is little evidence about effective ways to increase adherence to physical activity. Therefore, interventions are needed that produce sustained increases in adherence to physical activity and are cost-effective. The purpose is to assess the effectiveness of a primary care physical activity intervention in increasing adherence to physical activity in the general population seen in primary care. Method and design Randomized controlled trial with systematic random sampling. A total of 424 subjects of both sexes will participate; all will be over the age of 18 with a low level of physical activity (according to the International Physical Activity Questionnaire, IPAQ, self-employed and from 9 Primary Healthcare Centres (PHC. They will volunteer to participate in a physical activity programme during 3 months (24 sessions; 2 sessions a week, 60 minutes per session. Participants from each PHC will be randomly allocated to an intervention (IG and control group (CG. The following parameters will be assessed pre and post intervention in both groups: (1 health-related quality of life (SF-12, (2 physical activity stage of change (Prochaska's stages of change, (3 level of physical activity (IPAQ-short version, (4 change in perception of health (vignettes from the Cooperative World Organization of National Colleges, Academies, and Academic Associations of Family Physicians, COOP/WONCA, (5 level of social support for the physical activity practice (Social Support for Physical Activity Scale, SSPAS, and (6 control based on analysis (HDL, LDL and glycated haemoglobin. Participants' frequency of visits to the PHC will be registered over the six months before and after the programme. There will be a follow up in a face to face interview three, six and twelve months after the programme, with the reduced version of IPAQ, SF-12, SSPAS, and Prochaska's stages

  1. Filtered atmospheric venting of LWR containments: the Swedish research programme and design concepts

    International Nuclear Information System (INIS)

    Graeslund, C.; Johansson, K.; Nilsson, L.; Tiren, I.

    1981-01-01

    An investigation of filtered atmospheric venting of LWR containments has been recommended by a governmental reactor safety committee as a means of reducing the large releases of radioactivity which it is believed could arise as a result of accidents beyond the design bases (class 9) in nuclear power plants. The purpose of the project is to provide the technical basis for evaluating the feasibility, effectiveness and costs of some vent filter design concepts. The main design objective is substantially to reduce releases to the atmosphere of those radioactive substances which could cause long-lasting contamination of large land areas resulting from accidents beyond the design basis. The degree to which that objective can be reached by applying vent-filter functions becomes the main design evaluation criterion. The governing principle for the vent filter design is to utilize passive components and functions to the greatest possible extent. The design concept is to vent the stream and gases from the containment into an underground tunnel containing a large bed of gravel where the steam is condensed. Non-condensable gases are vented through a sand filter at the outlet of the tunnel via a stack to the atmosphere. The tunnel volume envisaged is of the order of 100,000m 3 , and the length about 1000m. A deep tunnel in rock can be made to withstand the pressures from the burning of hydrogen-air mixtures. As an alternative method the condensing and filtering functions can be achieved by utilizing water pools built sub-surface in concrete structures. Concrete structures can also be built to withstand hydrogen burning. (author)

  2. Evaluation of Market Design Programme - Phase IV; Utvaerdering av Market Designprogrammet - etapp IV

    Energy Technology Data Exchange (ETDEWEB)

    Wall, Tomas

    2013-08-15

    The Market Design program was established in year 2000 to study issues related to markets, regulations and policy instruments related to the deregulation of the Swedish electricity market. Through the years, the focus has widened to include not only Sweden but also international cooperation on these issues. The fourth phase of the program is now underway between the years 2010 and 2013. The overall project objective of this fourth phase is to increase knowledge about the Nordic and North European electricity market. Specific objective is to create new knowledge that affects market design of the single market area (Nordic, EU) and to contribute to constructive meetings between researchers, energy companies and government agencies on Market Design Issues. The purpose of the evaluation of the Market Design Program phase IV has been to investigate the results and benefits of the program in relation to the program's original objectives and to examine the need for and areas of further research and possible ways for the research in Market Design. The evaluation has been carried through in four phases during spring and summer 2013. The work has included reading, interviews with program stakeholders, analysis and reporting.

  3. System design specification for rotary mode core sample trucks No. 2, 3, and 4 programmable logic controller

    International Nuclear Information System (INIS)

    Dowell, J.L.; Akers, J.C.

    1995-01-01

    The system this document describes controls several functions of the Core Sample Truck(s) used to obtain nuclear waste samples from various underground storage tanks at Hanford. The system will monitor the sampling process and provide alarms and other feedback to insure the sampling process is performed within the prescribed operating envelope. The intended audience for this document is anyone associated with rotary or push mode core sampling. This document describes the Alarm and Control logic installed on Rotary Mode Core Sample Trucks (RMCST) number-sign 2, 3, and 4. It is intended to define the particular requirements of the RMCST alarm and control operation (not defined elsewhere) sufficiently for detailed design to implement on a Programmable Logic Controller (PLC)

  4. HIV epidemic appraisals for assisting in the design of effective prevention programmes: shifting the paradigm back to basics.

    Directory of Open Access Journals (Sweden)

    Sharmistha Mishra

    Full Text Available To design HIV prevention programmes, it is critical to understand the temporal and geographic aspects of the local epidemic and to address the key behaviours that drive HIV transmission. Two methods have been developed to appraise HIV epidemics and guide prevention strategies. The numerical proxy method classifies epidemics based on current HIV prevalence thresholds. The Modes of Transmission (MOT model estimates the distribution of incidence over one year among risk-groups. Both methods focus on the current state of an epidemic and provide short-term metrics which may not capture the epidemiologic drivers. Through a detailed analysis of country and sub-national data, we explore the limitations of the two traditional methods and propose an alternative approach.We compared outputs of the traditional methods in five countries for which results were published, and applied the numeric and MOT model to India and six districts within India. We discovered three limitations of the current methods for epidemic appraisal: (1 their results failed to identify the key behaviours that drive the epidemic; (2 they were difficult to apply to local epidemics with heterogeneity across district-level administrative units; and (3 the MOT model was highly sensitive to input parameters, many of which required extraction from non-regional sources. We developed an alternative decision-tree framework for HIV epidemic appraisals, based on a qualitative understanding of epidemiologic drivers, and demonstrated its applicability in India. The alternative framework offered a logical algorithm to characterize epidemics; it required minimal but key data.Traditional appraisals that utilize the distribution of prevalent and incident HIV infections in the short-term could misguide prevention priorities and potentially impede efforts to halt the trajectory of the HIV epidemic. An approach that characterizes local transmission dynamics provides a potentially more effective tool with

  5. Designing Effective Programmes for Encouraging the Business Start-up Process: Lessons from UK Experience.

    Science.gov (United States)

    Gibb, Allan A.

    1987-01-01

    Outlines programs in the United Kingdom (UK) designed to encourage the starting of small businesses. Successful programs help entrepreneurs obtain financial support, get business training, and develop a business plan. Recommends emphasis on personal competency and motivation training as well as shorter courses. (CH)

  6. Ethnographers, clinicians and ethnoventionists. Organising reflexivity in design oriented change programmes

    NARCIS (Netherlands)

    van Marrewijk, A.H.; Veenswijk, M.B.; Clegg, S.R.

    2010-01-01

    Purpose – The purpose of this paper is to reflect upon the role of intervention/oriented scientists in the process of organisation development. The paper seeks to contribute to the growing interest in design studies for organisation development and argues that a focus on reflexivity is missing in

  7. A comparative design view for accurate control of servos using a field programmable gate array

    International Nuclear Information System (INIS)

    Tickle, A J; Harvey, P K; Smith, J S; Wu, F; Buckle, J R

    2009-01-01

    An embedded system is a special-purpose computer system designed to perform one or a few dedicated functions. Altera DSP Builder presents designers and users with an alternate approach when creating their systems by employing a blockset similar to that already used in Simulink. The application considered in this paper is the design of a Pulse Width Modulation (PWM) system for use in stereo vision. PWM can replace a digital-to-analogue converter to control audio speakers, LED intensity, motor speed, and servo position. Rather than the conventional HDL coding approach this Simulink approach provides an easy understanding platform to the PWM design. This paper includes a comparison between two approaches regarding resource usage and flexibility etc. Included is how DSP Builder manipulates an onboard clock signal, in order to create the control pulses to the 'raw' coding of a PWM generator in VHDL. Both methods were shown to a selection of people and their views on which version they would subsequently use in their relative fields is discussed.

  8. Improvements in nuclear plant staffing resulting from the AP600 design programme

    International Nuclear Information System (INIS)

    Mycoff, C.

    2001-01-01

    The staffing for a single-unit AP600 is estimated to require a staff for operation and maintenance about 32% smaller than current generation power plants of similar size. These staffing reductions are driven primarily by various features incorporated into the AP600 plant design. (author)

  9. Background species effect on aqueous arsenic removal by nano zero-valent iron using fractional factorial design.

    Science.gov (United States)

    Tanboonchuy, Visanu; Grisdanurak, Nurak; Liao, Chih-Hsiang

    2012-02-29

    This study describes the removal of arsenic species in groundwater by nano zero-valent iron process, including As(III) and As(V). Since the background species may inhibit or promote arsenic removal. The influence of several common ions such as phosphate (PO4(3-)), bicarbonate (HCO3-)), sulfate (SO4(2-)), calcium (Ca2+), chloride (Cl-), and humic acid (HA) were selected to evaluate their effects on arsenic removal. In particular, a 2(6-2) fractional factorial design (FFD) was employed to identify major or interacting factors, which affect arsenic removal in a significant way. As a result of FFD evaluation, PO4(3-) and HA play the role of inhibiting arsenic removal, while Ca2+ was observed to play the promoting one. As for HCO3- and Cl-, the former one inhibits As(III) removal, whereas the later one enhances its removal; on the other hand, As(V) removal was affected only slightly in the presence of HCO3- or Cl-. Hence, it was suggested that the arsenic removal by the nanoiron process can be improved through pretreatment of PO4(3-) and HA. In addition, for the groundwater with high hardness, the nanoiron process can be an advantageous option because of enhancing characteristics of Ca2+. Copyright © 2011 Elsevier B.V. All rights reserved.

  10. The fully integrated biomedical engineering programme at Eindhoven University of Technology

    NARCIS (Netherlands)

    Slaaf, D.W.; Genderen, van M.H.P.

    2009-01-01

    The development of a fully integrated biomedical engineering programme (life sciences included from the start) is described. Details are provided about background, implementation, and didactic concept: design centred learning combined with courses. The curriculum has developed into a

  11. Competency-based (CanMEDS) residency training programme in radiology: systematic design procedure, curriculum and success factors

    International Nuclear Information System (INIS)

    Jippes, Erik; Engelen, Jo M.L. van; Brand, Paul L.P.; Oudkerk, Matthijs

    2010-01-01

    Based on the CanMEDS framework and the European Training Charter for Clinical Radiology a new radiology curriculum was designed in the Netherlands. Both the development process and the resulting new curriculum are presented in this paper. The new curriculum was developed according to four systematic design principles: discursiveness, hierarchical decomposition, systematic variation and satisficing (satisficing is different from satisfying; in this context, satisficing means searching for an acceptable solution instead of searching for an optimal solution). The new curriculum is organ based with integration of radiological diagnostic techniques, comprises a uniform national common trunk followed by a 2-year subspecialisation, is competency outcome based with appropriate assessment tools and techniques, and is based on regional collaboration among radiology departments. The application of the systematic design principles proved successful in producing a new curriculum approved by all authorities. The principles led to a structured, yet flexible, development process in which creative solutions could be generated and adopters (programme directors, supervisors and residents) were highly involved. Further research is needed to empirically test the components of the new curriculum. (orig.)

  12. Design of a Programmable Passive SoC for Biomedical Applications Using RFID ISO 15693/NFC5 Interface

    Directory of Open Access Journals (Sweden)

    Mayukh Bhattacharyya

    2018-01-01

    Full Text Available Low power, low cost inductively powered passive biotelemetry system involving fully customized RFID/NFC interface base SoC has gained popularity in the last decades. However, most of the SoCs developed are application specific and lacks either on-chip computational or sensor readout capability. In this paper, we present design details of a programmable passive SoC in compliance with ISO 15693/NFC5 standard for biomedical applications. The integrated system consists of a 32-bit microcontroller, a sensor readout circuit, a 12-bit SAR type ADC, 16 kB RAM, 16 kB ROM and other digital peripherals. The design is implemented in a 0.18 μ m CMOS technology and used a die area of 1.52 mm × 3.24 mm. The simulated maximum power consumption of the analog block is 592 μ W. The number of external components required by the SoC is limited to an external memory device, sensors, antenna and some passive components. The external memory device contains the application specific firmware. Based on the application, the firmware can be modified accordingly. The SoC design is suitable for medical implants to measure physiological parameters like temperature, pressure or ECG. As an application example, the authors have proposed a bioimplant to measure arterial blood pressure for patients suffering from Peripheral Artery Disease (PAD.

  13. A programme to reduce down-time and site radiation dose through improvements in control rod design

    International Nuclear Information System (INIS)

    Izatt, J.A.; Scobie, J.

    1983-01-01

    In many nuclear facilities a high proportion of the total radiation dose to staff may be ascribed to very few routine operations. Often this critical operation will require significant shut-down time, both to perform the function itself and to allow sufficient decay time to reduce radiation levels to acceptable values. This situation arises on the UTR-300 reactor at S.U.R.R.C., where over the twenty years of operation it has been found necessary to carry out preventive, and on some occasions remedial, maintenance at least once per year on the in-core elements of the control rod assemblies. This had led inevitably to reduced availability of the reactor and to significant overall radiation doses to the few long-serving staff members who carry out this work. The source of the problem seems to lie in the basic design of the assemblies, which may have been adequate for the original 10 KW versions of this reactor, but has proven to be deficient in several respects at the present 300 KW operating level. In an attempt to reduce down-time and radiation dose to staff a radical re-design of the control assemblies was undertaken in-house, and a conversion programme has been underway over the last two years. Details of the design improvements are presented with a discussion of the operating experience to date. (author)

  14. The design of a community lifestyle programme to improve the physical and psychological well-being of pregnant women with a BMI of 30 kg/m2 or more

    Directory of Open Access Journals (Sweden)

    Chmiel Catherine

    2010-05-01

    Full Text Available Abstract Background Obesity is a global public health issue. Having a BMI of 30 kg/m2 or more (classifying a person as obese at the start of pregnancy is a significant risk factor for maternal and fetal morbidity. There is a dearth of evidence to inform suitable inteventions to support pregnant women with a BMI of 30 kg/m2 or more. Here we describe a study protocol to test the feasibility of a variety of potential healthy lifestyle interventions for pregnant women with a BMI of 30 kg/m2 or more in a community based programme. Methods/Design Four hundred women will be approached to attend a 10-week community lifestyle programme. The programme will be provided as a supplement to standard antenatal care. The programme is multi-faceted, aimed at equipping participants with the skills and knowledge needed to adopt healthy behaviours. The social (cognitive learning theory will be used as a tool to encourage behaviour change, the behaviour change techniques are underpinned by five theoretical components; self-efficacy, outcome expectancies, goal setting, feedback and positive reinforcement. The main outcomes are pregnancy weight gain and caesarean section rate. Other important outcomes include clinical outcomes (e.g., birth weight and psychological outcomes (e.g., well-being. Secondary outcomes include women's experience of pregnancy and health care services, amount of physical activity, food intake and the suitability of the intervention components. A prospective study using quantitative and qualitative methods will inform the feasibility of implementing the community lifestyle programme with pregnant women with a BMI of 30 kg/m2 or more. Mixed methods of data collection will be used, including diaries, focus groups/interviews, pedometers, validated and specifically designed questionnaires, a programme register, weight gain during pregnancy and perinatal outcome data. Discussion Findings from this current feasibility study will inform future

  15. IAEA programme to support development and validation of advanced design and safety analysis codes

    Energy Technology Data Exchange (ETDEWEB)

    Choi, J., E-mail: J.H.Choi@iaea.org [International Atomic Energy Agency, Vienna (Austria)

    2013-07-01

    The International Atomic Energy Agency (IAEA) has been organized many international collaboration programs to support the development and validation of design and safety analysis computer codes for nuclear power plants. These programs are normally implemented with a frame of Coordinated Research Project (CRP) or International Collaborative Standard Problem (ICSP). This paper introduces CRPs and ICSPs currently being organized or recently completed by IAEA for this purpose. (author)

  16. [Dynamics of interdisciplinary around a health care network: simultaneous programme design and evaluation planning].

    Science.gov (United States)

    Bocquet, H; Mantovani, J; Raffy, C; Cayla, F; Clément, S

    2005-12-01

    This article reports on the evaluation experience of a multiple sclerosis care network in the Midi-Pyrénées region (MIPSEP). It shows how an evaluation team composed of public health doctors and sociologists progressively and naturally evolved from having a purely external observation role towards having a collaborative role actively working with the network's members and partners. A qualitative method was chosen for the data collection through interviews with the network's actors, and the frameworks for reference were constituted from official texts which defined the networks and their missions. Coming from a curative and healing culture, the network's actors were concerned primarily about how to organise themselves in order to better respond to the needs expressed by the patients. The various professional backgrounds and cultures, faced with different perspectives from innovation and confronted with the related difficulties, participated in a collective expertise exercise and collaborated in the construction process. This example supports an open, qualitative, evolutionary evaluation approach which is done in close proximity to the field and work on the ground. The study is timely given the current explosion of debate on evaluation methods. With a great deal of exchange and reflection on suitable tools and indicators as well as the respective roles of researchers, care givers and decision-makers, the results of this study advocate to favour multidisciplinary approaches, including opening up this process to funders and planning authorities rather than over-theorising about it, which only serves to enclose and paralyse a process that, on the contrary, should aim to be more inclusive. This could be a useful way to decompartmentalise and break down existing barriers within the health system.

  17. MDEP Conference on New Reactor Design Activities - Multinational Design Evaluation Programme (MDEP) Conference Proceedings, Paris, France, 10-11 September 2009

    International Nuclear Information System (INIS)

    2010-01-01

    The MDEP is a unique ten-nation initiative being undertaken by national regulatory authorities from Canada, China, Finland, France, Japan, Republic of Korea, the Russian Federation, South Africa, the United Kingdom, and the United States with the purposes of co-operating on safety design reviews of new reactors and identifying opportunities to harmonise and converge on safety licensing review practices and requirements. The OECD Nuclear Energy Agency has been chosen to provide the technical secretariat support. The International Atomic Energy Agency participates in many of the MDEP activities. Started in 2007 with co-operation on various pilot project issues, the MDEP's expected outcomes are: (1) improved effectiveness and efficiency of regulatory safety design reviews, (2) increased quality of safety assessments, and (3) and identified areas for the convergence of regulatory requirements and practices. Making each regulator stronger in its ability to make sovereign safety decisions is a key objective that cuts across all MDEP activities. In 2008, the top regulators from each national authority met as the MDEP Policy Group and adopted the present structure and programme of work for the MDEP, including the pursuit of co-operation on specific safety design reviews and pursuing closer co-ordination on harmonisation and convergence issues such as digital instrumentation and control, mechanical codes and standards, and vendor inspections. The MDEP is currently a long-term programme that focuses in near term and interim results to share within MDEP and with other stakeholders. With effective communications in mind, the MDEP Policy Group directed the NEA to co-ordinate the Conference on New Reactor Design Activities with the purpose of communicating to a wide spectrum of stakeholders worldwide as to the program of work and accomplishments of the MDEP, and soliciting feedback and input from these stakeholders regarding recommendations on how to co-operate more efficiently

  18. Technology Programme

    Energy Technology Data Exchange (ETDEWEB)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo [ed.

    2005-07-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  19. Technology Programme

    International Nuclear Information System (INIS)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo

    2005-01-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  20. Design, Build and Validation of a Low-Cost Programmable Battery Cycler

    DEFF Research Database (Denmark)

    Propp, Karsten; Fotouhi, Abbas; Knap, Vaclav

    2016-01-01

    The availability of laboratory grade equipment for battery tests is usually limited due to high costs of the hardware. Especially for lithium-sulfur (Li-S) batteries these experiments can be time intensive since the cells need to be precycled and are usually cycled with relatively low loads....... To improve the availability of test hardware, this paper conducts a study to design and test a low cost solution for cycling and testing batteries for tasks that do not necessarily need the high precision of professional hardware. While the described solution is in principle independent of the cell chemistry......, here it is specifically optimized to fit to Li-S batteries. To evaluate the accuracy of the presented battery cycler, the hardware is tested and compared with a professional Kepco bipolar power source. The results indicate the usefulness for application oriented battery tests with real life cycles...

  1. Evaluation of a parent-designed programme to support tooth brushing of infants and young children*

    Science.gov (United States)

    Huebner, CE; Milgrom, P

    2015-01-01

    Objectives This study developed and tested an intervention to help parents establish a routine of brushing their young children’s teeth twice a day. Methods Community-based participatory research methods were used to engage parents in the design of the intervention to maximize its relevance and acceptability to others. Input was obtained by interviews and focus groups. The resulting intervention was four 90-min small-group sessions that provided educational information, direct instruction, practice and peer-to-peer problem-solving. A pre- to post-non-randomized design was used to evaluate the intervention’s effect to increase or maintain parents’ twice daily brushing. Results Intervention participants were 67 primary caregivers of children under six years of age. Of the 67 initial participants, 50 completed a post-intervention questionnaire administered 4 to 8 weeks following the intervention. The proportion of parents who reported brushing their young children’s teeth twice a day increased significantly from 59 per cent prior to the intervention to 89 per cent post-intervention (McNemar’s X2 = 10.71, P = 0.002). There were concomitant and statistically significant increases over the study period in parents’ confidence for brushing twice a day, attitudes about the importance of brushing and their self-efficacy for tooth brushing. Parents’ knowledge of children’s oral health, assessed by a 15-item scale developed for this study (‘Things to Know About Baby Teeth’), also increased significantly. Conclusions Twice daily tooth brushing is a low-cost, effective strategy to reduce the risk of childhood caries. As demonstrated here, community-based efforts can help parents achieve this important health behaviour. PMID:25070036

  2. Evaluation of a parent-designed programme to support tooth brushing of infants and young children.

    Science.gov (United States)

    Huebner, C E; Milgrom, P

    2015-02-01

    This study developed and tested an intervention to help parents establish a routine of brushing their young children's teeth twice a day. Community-based participatory research methods were used to engage parents in the design of the intervention to maximize its relevance and acceptability to others. Input was obtained by interviews and focus groups. The resulting intervention was four 90-min small-group sessions that provided educational information, direct instruction, practice and peer-to-peer problem-solving. A pre- to post-non-randomized design was used to evaluate the intervention's effect to increase or maintain parents' twice daily brushing. Intervention participants were 67 primary caregivers of children under six years of age. Of the 67 initial participants, 50 completed a post-intervention questionnaire administered 4 to 8 weeks following the intervention. The proportion of parents who reported brushing their young children's teeth twice a day increased significantly from 59 per cent prior to the intervention to 89 per cent post-intervention (McNemar's X(2)  = 10.71, P = 0.002). There were concomitant and statistically significant increases over the study period in parents' confidence for brushing twice a day, attitudes about the importance of brushing and their self-efficacy for tooth brushing. Parents' knowledge of children's oral health, assessed by a 15-item scale developed for this study ('Things to Know About Baby Teeth'), also increased significantly. Twice daily tooth brushing is a low-cost, effective strategy to reduce the risk of childhood caries. As demonstrated here, community-based efforts can help parents achieve this important health behaviour. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  3. Development of a multimedia educational programme for first-time hearing aid users: a participatory design.

    Science.gov (United States)

    Ferguson, Melanie; Leighton, Paul; Brandreth, Marian; Wharrad, Heather

    2018-05-02

    To develop content for a series of interactive video tutorials (or reusable learning objects, RLOs) for first-time adult hearing aid users, to enhance knowledge of hearing aids and communication. RLO content was based on an electronically-delivered Delphi review, workshops, and iterative peer-review and feedback using a mixed-methods participatory approach. An expert panel of 33 hearing healthcare professionals, and workshops involving 32 hearing aid users and 11 audiologists. This ensured that social, emotional and practical experiences of the end-user alongside clinical validity were captured. Content for evidence-based, self-contained RLOs based on pedagogical principles was developed for delivery via DVD for television, PC or internet. Content was developed based on Delphi review statements about essential information that reached consensus (≥90%), visual representations of relevant concepts relating to hearing aids and communication, and iterative peer-review and feedback of content. This participatory approach recognises and involves key stakeholders in the design process to create content for a user-friendly multimedia educational intervention, to supplement the clinical management of first-time hearing aid users. We propose participatory methodologies are used in the development of content for e-learning interventions in hearing-related research and clinical practice.

  4. Field Programmable Gate Array Based Parallel Strapdown Algorithm Design for Strapdown Inertial Navigation Systems

    Directory of Open Access Journals (Sweden)

    Long-Hua Ma

    2011-08-01

    Full Text Available A new generalized optimum strapdown algorithm with coning and sculling compensation is presented, in which the position, velocity and attitude updating operations are carried out based on the single-speed structure in which all computations are executed at a single updating rate that is sufficiently high to accurately account for high frequency angular rate and acceleration rectification effects. Different from existing algorithms, the updating rates of the coning and sculling compensations are unrelated with the number of the gyro incremental angle samples and the number of the accelerometer incremental velocity samples. When the output sampling rate of inertial sensors remains constant, this algorithm allows increasing the updating rate of the coning and sculling compensation, yet with more numbers of gyro incremental angle and accelerometer incremental velocity in order to improve the accuracy of system. Then, in order to implement the new strapdown algorithm in a single FPGA chip, the parallelization of the algorithm is designed and its computational complexity is analyzed. The performance of the proposed parallel strapdown algorithm is tested on the Xilinx ISE 12.3 software platform and the FPGA device XC6VLX550T hardware platform on the basis of some fighter data. It is shown that this parallel strapdown algorithm on the FPGA platform can greatly decrease the execution time of algorithm to meet the real-time and high precision requirements of system on the high dynamic environment, relative to the existing implemented on the DSP platform.

  5. The Ringhals HSI and control room modernisation programme - the practical application of a contemporary user and HF based HSI design process

    International Nuclear Information System (INIS)

    Forsberg, Martin

    2004-01-01

    The existing Ringhals 2 main control room and constituent HSI has now been in operation over approximately 30 years. It has been estimated that the plant's life expectancy can be extended a further 25 years, assuming that a comprehensive modernisation of the present R2 I and C systems is implemented. This paper is intended to provide the readers with a general overview of the modernisation programme initiated during 1999 and expected to be completed with the new MCR and HSI to be in operation during 2006. There are a number of aspects to the modernisation programme that may make it somewhat unique. Naturally the lessons learned during this programme may be of interest for other organisations discussing future plant modernisation Although we can naturally cite the conventional reasons for plant modernisation, one should not neglect other factors that at first glance may not be all that obvious. Such factors include the changing demographic trends in knowledge and training represented in the national educational processes in conjunction with the transition to digital technologies. Personnel expectations upon their future work places also play a role. Nor for that matter should issues such as personnel recruitment policies and organisational goals be underestimated in the design process. A critical aspect of the Ringhals modernisation programme that had to be tackled with was the design development process adopted for design specification, design development and design verification of the MCR and HSI solutions. From the outset Ringhals has pursued the goal of applying an integrated user and human factors (HF) based design approach in the modernisation process's design activities. Therefore user participation in the design process as well as the application of the NUREG 0711 HF Design Process Model and other suitable guidelines for HFE design processes has been a guiding principle. Ringhals possibly represents an interesting example of the practical application of

  6. Beautiful from the Inside Out: A School-Based Programme Designed to Increase Self-Esteem and Positive Body Image among Preadolescents

    Science.gov (United States)

    Norwood, Sarah Jane; Murray, Marisa; Nolan, Amanda; Bowker, Anne

    2011-01-01

    The goal of the present study was to design, implement, and evaluate a school-based programme that aimed to increase self-esteem and positive body image among preadolescent boys and girls. Participants in grades five and six (N = 77; M [subscript age] = 10.86, 53.2% girls) from a public school in Eastern Ontario completed a battery of validated…

  7. The Framework of a Generic DProf Programme--A Reflection on Its Design, the Relational Dimension for Candidates and Advisers and the Potential for Knowledge Co-Creation

    Science.gov (United States)

    Fillery-Travis, Annette Jayne

    2014-01-01

    This paper critically engages with the pedagogical design of a generic professional doctorate programme as a framework for creation of actionable knowledge within the practice of both adviser and candidate. Within this exploration the relational dimensions of the adviser-candidate interaction are identified and their potential impact partially…

  8. Collaborative Framework for Designing a Sustainability Science Programme: Lessons Learned at the National Autonomous University of Mexico

    Science.gov (United States)

    Charli-Joseph, Lakshmi; Escalante, Ana E.; Eakin, Hallie; Solares, Ma. José; Mazari-Hiriart, Marisa; Nation, Marcia; Gómez-Priego, Paola; Pérez-Tejada, César A. Domínguez; Bojórquez-Tapia, Luis A.

    2016-01-01

    Purpose: The authors describe the challenges and opportunities associated with developing an interdisciplinary sustainability programme in an emerging economy and illustrate how these are addressed through the approach taken for the development of the first postgraduate programme (MSc and PhD) in sustainability science at the National Autonomous…

  9. Can an EASYcare based dementia training programme improve diagnostic assessment and management of dementia by general practitioners and primary care nurses? The design of a randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Lucassen PL

    2008-04-01

    the possible causal relations between the rate of success of the intervention components and the outcomes. Discussion We developed multifaceted dementia training programme. Novelties in this programme are the training in fixed collaborative duos and the inclusion of an individual coaching program. The intervention is designed according to international guidelines and educational standards. Exploratory analysis will reveal its successful elements. Selection bias and contamination may be threats to the reliability of future results of this trial. Nevertheless, the results of this trial may provide useful information for policy makers and developers of continuing medical education. Trial registration ClinicalTrials.gov ID NCT00459784

  10. Design and implementation of a reconfigurable mixed-signal SoC based on field programmable analog arrays

    Science.gov (United States)

    Liu, Lintao; Gao, Yuhan; Deng, Jun

    2017-11-01

    This work presents a reconfigurable mixed-signal system-on-chip (SoC), which integrates switched-capacitor-based field programmable analog arrays (FPAA), analog-to-digital converter (ADC), digital-to-analog converter, digital down converter , digital up converter, 32-bit reduced instruction-set computer central processing unit (CPU) and other digital IPs on a single chip with 0.18 μm CMOS technology. The FPAA intellectual property could be reconfigured as different function circuits, such as gain amplifier, divider, sine generator, and so on. This single-chip integrated mixed-signal system is a complete modern signal processing system, occupying a die area of 7 × 8 mm 2 and consuming 719 mW with a clock frequency of 150 MHz for CPU and 200 MHz for ADC/DAC. This SoC chip can help customers to shorten design cycles, save board area, reduce the system power consumption and depress the system integration risk, which would afford a big prospect of application for wireless communication. Project supported by the National High Technology and Development Program of China (No. 2012AA012303).

  11. Background noise measurements from jet exit vanes designed to reduced flow pulsations in an open-jet wind tunnel

    Science.gov (United States)

    Hoad, D. R.; Martin, R. M.

    1985-01-01

    Many open jet wind tunnels experience pulsations of the flow which are typically characterized by periodic low frequency velocity and pressure variations. One method of reducing these fluctuations is to install vanes around the perimeter of the jet exit to protrude into the flow. Although these vanes were shown to be effective in reducing the fluctuation content, they can also increase the test section background noise level. The results of an experimental acoustic program in the Langley 4- by 7-Meter Tunnel is presented which evaluates the effect on tunnel background noise of such modifications to the jet exit nozzle. Noise levels for the baseline tunnel configuration are compared with those for three jet exit nozzle modifications, including an enhanced noise reduction configuration that minimizes the effect of the vanes on the background noise. Although the noise levels for this modified vane configuration were comparable to baseline tunnel background noise levels in this facility, installation of these modified vanes in an acoustic tunnel may be of concern because the noise levels for the vanes could be well above background noise levels in a quiet facility.

  12. Examining the pathways for young people with drug and alcohol dependence: a mixed-method design to examine the role of a treatment programme.

    Science.gov (United States)

    Nathan, Sally; Rawstorne, Patrick; Hayen, Andrew; Bryant, Joanne; Baldry, Eileen; Ferry, Mark; Williams, Megan; Shanahan, Marian; Jayasinha, Ranmalie

    2016-05-25

    Young people with drug and alcohol problems are likely to have poorer health and other psychosocial outcomes than other young people. Residential treatment programmes have been shown to lead to improved health and related outcomes for young people in the short term. There is very little robust research showing longer term outcomes or benefits of such programmes. This paper describes an innovative protocol to examine the longer term outcomes and experiences of young people referred to a residential life management and treatment programme in Australia designed to address alcohol and drug issues in a holistic manner. This is a mixed-methods study that will retrospectively and prospectively examine young people's pathways into and out of a residential life management programme. The study involves 3 components: (1) retrospective data linkage of programme data to health and criminal justice administrative data sets, (2) prospective cohort (using existing programme baseline data and a follow-up survey) and (3) qualitative in-depth interviews with a subsample of the prospective cohort. The study will compare findings among young people who are referred and (a) stay 30 days or more in the programme (including those who go on to continuing care and those who do not); (b) start, but stay fewer than 30 days in the programme; (c) are assessed, but do not start the programme. Ethics approval has been sought from several ethics committees including a university ethics committee, state health departments and an Aboriginal-specific ethics committee. The results of the study will be published in peer-reviewed journals, presented at research conferences, disseminated via a report for the general public and through Facebook communications. The study will inform the field more broadly about the value of different methods in evaluating programmes and examining the pathways and trajectories of vulnerable young people. Published by the BMJ Publishing Group Limited. For permission to

  13. Designed Green Toolbox as built environment educating method-analytical comparison between two groups of students with different cultural background

    NARCIS (Netherlands)

    El Fiky, U.; Hamdy, I.; Fikry, M.

    2006-01-01

    This paper is concerned with evaluating and testing the application process of green architecture design strategies using a tool-box as a built environment educating method and a pre-design reminder. Understanding the suggested green design strategies, testing the tool-box effectiveness,

  14. Monitoring of persistent organic pollutants in Africa. Part 2: Design of a network to monitor the continental and intercontinental background

    Czech Academy of Sciences Publication Activity Database

    Lammel, G.; Dobrovolný, P.; Dvorská, A.; Chromá, K.; Brázdil, R.; Holoubek, I.; Hošek, Jiří

    2009-01-01

    Roč. 11, č. 11 (2009), s. 1964-1972 ISSN 1464-0325 Institutional research plan: CEZ:AV0Z30420517 Keywords : persistent organic pollutants * Africa * background * passive air sampling * climatology Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 2.225, year: 2009

  15. Background sources at PEP

    International Nuclear Information System (INIS)

    Lynch, H.; Schwitters, R.F.; Toner, W.T.

    1988-01-01

    Important sources of background for PEP experiments are studied. Background particles originate from high-energy electrons and positrons which have been lost from stable orbits, γ-rays emitted by the primary beams through bremsstrahlung in the residual gas, and synchrotron radiation x-rays. The effect of these processes on the beam lifetime are calculated and estimates of background rates at the interaction region are given. Recommendations for the PEP design, aimed at minimizing background are presented. 7 figs., 4 tabs

  16. The Effectiveness and Sustainability of a Universal School-Based Programme for Preventing Depression in Chinese Adolescents: A Follow-Up Study Using Quasi-Experimental Design.

    Directory of Open Access Journals (Sweden)

    Eliza S Y Lai

    Full Text Available A pilot study about the effectiveness of a universal school-based programme, "The Little Prince is Depressed", for preventing depression in Chinese adolescents in Hong Kong was conducted and reported previously. This study used a larger sample to examine the effectiveness and sustainability of the programme.This study used quasi-experimental design. Twelve schools enrolled in "The Little Prince is Depressed" programme either as an intervention or a control condition. The intervention schools carried out the 12-session programme in two phases: the professional-led first phase and the teacher-led second phase. All participants were required to complete a questionnaire at three time points measuring their (1 depressive, anxiety, and stress levels; (2 knowledge of mental health; (3 attitudes towards mental illness; (4 perceived social support; and (5 help-seeking behaviours.A total of 3,391 students participated in the study. The level of depressive symptoms did not reduce significantly at post-intervention; however, a delayed effect was observed at follow-up assessment for the participants of the teacher-led group in reducing anxiety and stress levels. Also, the knowledge of mental health and attitudes towards mental illness of the intervention-group participants significantly improved at post-test, and the outcomes were maintained at 4 to 5 months after the intervention in both the professional-led and the teacher-led conditions (p<.05. A preference among schoolchildren for whom to seek help from was identified.The universal depression prevention programme was effective in enhancing knowledge of mental health and promoting a more positive attitude towards mental illness among adolescents in Hong Kong. In particular, the teacher-led group showed better outcomes than the professional-led group in reducing students' anxiety and stress at follow-up period. The programme can achieve sustainability in schools if teachers are provided with adequate

  17. How to develop a theory-driven evaluation design? Lessons learned from an adolescent sexual and reproductive health programme in West Africa.

    Science.gov (United States)

    Van Belle, Sara B; Marchal, Bruno; Dubourg, Dominique; Kegels, Guy

    2010-11-30

    This paper presents the development of a study design built on the principles of theory-driven evaluation. The theory-driven evaluation approach was used to evaluate an adolescent sexual and reproductive health intervention in Mali, Burkina Faso and Cameroon to improve continuity of care through the creation of networks of social and health care providers. Based on our experience and the existing literature, we developed a six-step framework for the design of theory-driven evaluations, which we applied in the ex-post evaluation of the networking component of the intervention. The protocol was drafted with the input of the intervention designer. The programme theory, the central element of theory-driven evaluation, was constructed on the basis of semi-structured interviews with designers, implementers and beneficiaries and an analysis of the intervention's logical framework. The six-step framework proved useful as it allowed for a systematic development of the protocol. We describe the challenges at each step. We found that there is little practical guidance in the existing literature, and also a mix up of terminology of theory-driven evaluation approaches. There is a need for empirical methodological development in order to refine the tools to be used in theory driven evaluation. We conclude that ex-post evaluations of programmes can be based on such an approach if the required information on context and mechanisms is collected during the programme.

  18. Low background infrared (LBIR) facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Low background infrared (LBIR) facility was originally designed to calibrate user supplied blackbody sources and to characterize low-background IR detectors and...

  19. Designing and implementing a geographical information system: A guide for managers of area-wide pest management programmes

    International Nuclear Information System (INIS)

    2006-04-01

    Over the past two decades, the use of computer software and mapping methods known as geographical information systems (GIS) has been adopted by an ever growing variety of professionals. Every activity that deals with location dependent information can use GIS, and agriculture is no exception. The potential of GIS and remote sensing (RS) to facilitate the planning and implementation of areawide integrated pest management (AW-IPM) programmes is enormous but unfortunately, these methods are still much underused. AW-IPM programmes, especially those that integrate the sterile insect technique (SIT) with other surveillance and control methods, would benefit considerably by drawing on GIS/RS. These programmes are often implemented over large areas of even tens of thousands of square kilometres, where surveillance methods are deployed and large data sets are systematically generated on a daily basis. The acquisition of geo-referenced data sets on pest presence/absence, relative abundance, disease prevalence, crop damage, etc., that will allow accurate spatial and temporal analysis is important for proper and timely decision making to efficiently plan and implement any operational pest management programme. Animal health and plant protection officials and pest control programme managers might be intuitively aware of the importance of employing GIS as an analytical tool. However, they often lack a deeper understanding of its capabilities. Since GIS is a desk exercise using computers, data analysis is often left to the computer staff without proper directives from the programme managers on programmatic needs. This is unfortunate as it will usually NOT bring the desired GIS-processed information to the decision makers. This manual targets area-wide pest control programme administrators and managers of FAO and IAEA Member States in an attempt to demonstrate the type of data processing and spatial analysis that can be expected of GIS. The manual does not aim to provide

  20. Background Material

    DEFF Research Database (Denmark)

    Zandersen, Marianne; Hyytiäinen, Kari; Saraiva, Sofia

    This document serves as a background material to the BONUS Pilot Scenario Workshop, which aims to develop harmonised regional storylines of socio-ecological futures in the Baltic Sea region in a collaborative effort together with other BONUS projects and stakeholders.......This document serves as a background material to the BONUS Pilot Scenario Workshop, which aims to develop harmonised regional storylines of socio-ecological futures in the Baltic Sea region in a collaborative effort together with other BONUS projects and stakeholders....

  1. Technology programme

    International Nuclear Information System (INIS)

    2007-01-01

    The technology activities carried out by the EURATOM-ENEA Association concern the continuation of the European Fusion Development Agreement (EFDA) as well as the ITER activities coordinated by the ITER International Office and Fusion for Energy. Also included in the activities are design and RD under the Broader Approach Agreement between the EU and Japan. In order to better contribute to the programme a number of consortium agreements among the Associations are being signed. Collaboration with industries in view of their participation in the construction of ITER was further strengthened, mainly in the field of magnet and divertor components. The new European Test Blanket Facility at ENEA Brasimone was completed; the design of the ITER radial neutron camera was optimised and the performance achievable with the in-vessel viewing system was further assessed by experimental trials. Design activities for the JT-60SA magnet and power supply system as well as the design and experimental activities related to the target of the International Fusion Materials Irradiation Facility were continued. Significant work was done to define quality assurance for neutronics analyses. Mockups of the ITER pre-compression ring made in glass fibre epoxy were tested. The activities and results documented in the following illustrate ENEA's efforts to support fusion development

  2. arXiv A Programmable Delay Design for the sTGC Detector at the Upgraded New Small Wheel of the ATLAS Muon Spectrometer

    CERN Document Server

    INSPIRE-00225390; Guan, Liang; Chapman, John W; Zhou, Bing; Zhu, Junjie

    2017-11-01

    We present a programmable time alignment scheme used in an ASIC for the ATLAS forward muon trigger development. The scheme utilizes regenerated clocks with programmable phases to compensate for the timing offsets introduced by different detector trace lengths. Each ASIC used in the design has 104 input channels with delay compensation circuitry providing steps of ∼ 3 ns and a full range of 25 ns for each channel. Detailed implementation of the scheme including majority logic to suppress single-event effects is presented. The scheme is flexible and fully synthesizable. The approach is adaptable to other applications with similar phase shifting requirements. In addition, the design is resource efficient and is suitable for cost-effective digital implementation with a large number of channels.

  3. A model for integrating strategic planning and competence-based curriculum design in establishing a public health programme: the UNC Charlotte experience.

    Science.gov (United States)

    Thompson, Michael E; Harver, Andrew; Eure, Marquis

    2009-08-11

    The University of North Carolina at Charlotte, a doctoral/research-intensive university, is the largest institution of higher education in the Charlotte region. The university currently offers 18 doctoral, 62 master's and 90 baccalaureate programmes. Fall 2008 enrolment exceeded 23,300 students, including more than 4900 graduate students. The university's Department of Health Behavior and Administration was established on 1 July 2002 as part of a transformed College of Health & Human Services. In 2003, the Department initiated a series of stakeholder activities as part of its strategic planning and programmatic realignment efforts. The Department followed an empirically derived top-down/bottom-up strategic planning process that fostered community engagement and coordination of efforts across institutional levels. This process culminated in a vision to transform the unit into a Council on Education for Public Health accredited programme in public health and, eventually, an accredited school of public health. To date, the Department has revised its Master of Science in health promotion into an Master of Science in Public Health programme, renamed itself the Department of Public Health Sciences, launched a Bachelor of Science in Public Health major, laid plans for a doctoral programme, and received accreditation from the Council on Education for Public Health as a public health programme. Furthermore, the campus has endorsed the programme's growth into a school of public health as one of its priorities. It is only through this rigorous and cyclical process of determining what society needs, designing a curriculum specifically to prepare graduates to meet those needs, ensuring that those graduates meet those needs, and reassessing society's needs that we can continue to advance the profession and ensure the public's health. Community stakeholders should be active contributors to programme innovation. Lessons learnt from this process include: being connected to your

  4. A model for integrating strategic planning and competence-based curriculum design in establishing a public health programme: the UNC Charlotte experience

    Directory of Open Access Journals (Sweden)

    Harver Andrew

    2009-08-01

    Full Text Available Abstract Introduction The University of North Carolina at Charlotte, a doctoral/research-intensive university, is the largest institution of higher education in the Charlotte region. The university currently offers 18 doctoral, 62 master's and 90 baccalaureate programmes. Fall 2008 enrolment exceeded 23 300 students, including more than 4900 graduate students. The university's Department of Health Behavior and Administration was established on 1 July 2002 as part of a transformed College of Health & Human Services. Case description In 2003, the Department initiated a series of stakeholder activities as part of its strategic planning and programmatic realignment efforts. The Department followed an empirically derived top-down/bottom-up strategic planning process that fostered community engagement and coordination of efforts across institutional levels. This process culminated in a vision to transform the unit into a Council on Education for Public Health accredited programme in public health and, eventually, an accredited school of public health. To date, the Department has revised its Master of Science in health promotion into an Master of Science in Public Health programme, renamed itself the Department of Public Health Sciences, launched a Bachelor of Science in Public Health major, laid plans for a doctoral programme, and received accreditation from the Council on Education for Public Health as a public health programme. Furthermore, the campus has endorsed the programme's growth into a school of public health as one of its priorities. Discussion and Evaluation It is only through this rigorous and cyclical process of determining what society needs, designing a curriculum specifically to prepare graduates to meet those needs, ensuring that those graduates meet those needs, and reassessing society's needs that we can continue to advance the profession and ensure the public's health. Community stakeholders should be active contributors to

  5. Design & Innovation

    DEFF Research Database (Denmark)

    Boelskifte, Per; Jørgensen, Ulrik

    2005-01-01

    The new design and innovation programme at DTU is challenging some of the standard concepts dominating most engineering educations. The programme, its background, context and basic educational ideas are presented and discussed in this paper. To build competences that match the need for innovative...... and design oriented engineers in industry and society has turned out to challenge a number of the standard – and often taken for granted – concepts in engineering education still dominated world wide by rather strict norms and concepts of learning that do not challenge the students creativity and innovative...

  6. Broader utilization of programmable automation equipment in French nuclear power plants: Reflections on the choices made by Electricite de France and French designers

    International Nuclear Information System (INIS)

    Baudry, Y.; Varaldi, G.

    1983-01-01

    More than 1000 microprocessors and more than 10,000 data memories in each of the twenty or so 1300 MW units in the French nuclear programme: that was the decision taken by Electricite de France (EDF) in conjunction with the designers in 1974, with the intention of introducing programmable automata on a wide scale in French nuclear power plants. This programme was carried out with the assistance of advanced research services such as the universities, the Commissariat a l'energie atomique (CEA), EDF's design and research service and the designers, most of whom were already EDF suppliers for the 900 MW range. Having used computers for linking sequences (themselves carried out with electromagnetic technology) for its latest natural-uranium gas-cooled graphite-moderated power plants, EDF decided to call a temporary halt, in the case of its 900 MW light-water range, to the use of digital techniques for the control and automation of power plants although it continued to employ such techniques widely in data processing. Thus, the widespread introduction of programmable automata, which was decided upon in 1974/75 at a time when no equivalent existed at the international level, led EDF and French designers to undertake a major development effort in order to meet the requirements - particularly safety and reliability requirements - for such automata to be incorporated into the nuclear field. How does this choice fit in with the logical evolution of the digitalization of French nuclear power plants. What problems has it caused for EDF and French industry. How have these problems been tackled. How have they been overcome. These are the questions dealt with in this paper. (author)

  7. What do community health workers have to say about their work, and how can this inform improved programme design? A case study with CHWs within Kenya

    Directory of Open Access Journals (Sweden)

    Martin Oliver

    2015-05-01

    Full Text Available Background: Community health workers (CHWs are used increasingly in the world to address shortages of health workers and the lack of a pervasive national health system. However, while their role is often described at a policy level, it is not clear how these ideals are instantiated in practice, how best to support this work, or how the work is interpreted by local actors. CHWs are often spoken about or spoken for, but there is little evidence of CHWs’ own characterisation of their practice, which raises questions for global health advocates regarding power and participation in CHW programmes. This paper addresses this issue. Design: A case study approach was undertaken in a series of four steps. Firstly, groups of CHWs from two communities met and reported what their daily work consisted of. Secondly, individual CHWs were interviewed so that they could provide fuller, more detailed accounts of their work and experiences; in addition, community health extension workers and community health committee members were interviewed, to provide alternative perspectives. Thirdly, notes and observations were taken in community meetings and monthly meetings. The data were then analysed thematically, creating an account of how CHWs describe their own work, and the tensions and challenges that they face. Results: The thematic analysis of the interview data explored the structure of CHW's work, in terms of the frequency and range of visits, activities undertaken during visits (monitoring, referral, etc. and the wider context of their work (links to the community and health service, limited training, coordination and mutual support through action and discussion days, etc., and provided an opportunity for CHWs to explain their motivations, concerns and how they understood their role. The importance of these findings as a contribution to the field is evidenced by the depth and detail of their descriptive power. One important aspect of this is that CHWs

  8. The Effectiveness and Sustainability of a Universal School-Based Programme for Preventing Depression in Chinese Adolescents: A Follow-Up Study Using Quasi-Experimental Design.

    Science.gov (United States)

    Lai, Eliza S Y; Kwok, Chi-Leung; Wong, Paul W C; Fu, King-Wa; Law, Yik-Wa; Yip, Paul S F

    2016-01-01

    A pilot study about the effectiveness of a universal school-based programme, "The Little Prince is Depressed", for preventing depression in Chinese adolescents in Hong Kong was conducted and reported previously. This study used a larger sample to examine the effectiveness and sustainability of the programme. This study used quasi-experimental design. Twelve schools enrolled in "The Little Prince is Depressed" programme either as an intervention or a control condition. The intervention schools carried out the 12-session programme in two phases: the professional-led first phase and the teacher-led second phase. All participants were required to complete a questionnaire at three time points measuring their (1) depressive, anxiety, and stress levels; (2) knowledge of mental health; (3) attitudes towards mental illness; (4) perceived social support; and (5) help-seeking behaviours. A total of 3,391 students participated in the study. The level of depressive symptoms did not reduce significantly at post-intervention; however, a delayed effect was observed at follow-up assessment for the participants of the teacher-led group in reducing anxiety and stress levels. Also, the knowledge of mental health and attitudes towards mental illness of the intervention-group participants significantly improved at post-test, and the outcomes were maintained at 4 to 5 months after the intervention in both the professional-led and the teacher-led conditions (psustainability in schools if teachers are provided with adequate support.

  9. Why a carefully designed, nurse-led intervention failed to meet expectations: the case of the Care Programme for Palliative Radiotherapy.

    Science.gov (United States)

    Vahedi Nikbakht-Van de Sande, C V M; Braat, C; Visser, A Ph; Delnoij, D M J; van Staa, A L

    2014-04-01

    Implement and evaluate the Care Programme for Palliative Radiotherapy (CPPR) in the Outpatient Clinic of the Department of Radiotherapy, Erasmus MC-Cancer Institute, Rotterdam, The Netherlands. Participatory Action Research (PAR). Qualitative descriptive design: participatory observations, semi-structured interviews with patients and professionals and focus groups with professionals; content analysis of documents. Patients with impending paraplegia due to metastatic spinal cord compression, nurse practitioners (NPs), nurse manager, staff and ward nurses, radiographers, radiotherapists and medical doctors. After a shift from inpatient to outpatient radiotherapy treatment, patients and healthcare professionals perceived shortcomings in the oncological chain care. The CPPR was developed in a participative way giving a key role to the NP. Evaluation after implementation of the programme showed that patients and professionals were predominantly positive about its effects. However, implementation was not sustained due to lack of institutional and managerial support. The technological innovation far preceded the organisational changes needed to provide innovative, patient-centred care. Implementing this programme with a central role for the NP was seen as the solution to the problems identified. However, in spite of the systematic approach using PAR, the programme was not successful in bringing about sustained improvements. NPs fulfil a valuable role in the care and support of patients with palliative care needs but need institutional support. More attention should have paid to the organisational context. Involve all relevant actors; use a participatory approach to enhance commitment; ensure the support of management during the whole project. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. The European Fusion Programme

    International Nuclear Information System (INIS)

    Palumbo, D.

    1983-01-01

    The European Fusion Programme is coordinated by Euratom and represents a long term cooperative project of Member States of the European Communities in the field of fusion, designed to lead to the joint construction of prototypes. The main lines of the programme proposed for 1982 to 1986 are: (1) the continuation of a strong effort on tokamaks with emphasis on JET construction, operation and upgrading, (2) conceptual design of NET and development of the related technology, and (3) further work on two alternative magnetic confinement systems. The current status and future plans for this programme are discussed in the paper. (author)

  11. Panel training programme for the Protected Designation of Origin “Aceituna Aloreña de Malaga”

    Directory of Open Access Journals (Sweden)

    Galán-Soldevilla, H.

    2012-03-01

    Full Text Available A training programme (52 h was developed for the Protected Designation of Origin (PDO Aceituna Aloreña de Málaga quality certification panel. Recruiting of the panel was done by personal interview with open questions between producers and technicians of the product and seven tests were submitted to potential candidates during the selection step (4h. Training was done in two stages: a basic training period (12h in which the assessors developed their sensory memory and improved their aptitude for detecting, recognizing and describing the sensory stimuli and a specific training period (36 h, in which the sample preparation, test conditions and the sensory profile were established. The specific training finished when the evaluation method and requirements of the Aloreña olives for the PDO were established and the panel work as a whole. 9 positive descriptors were analyzed in order to characterize Aloreña table olives: 4 for odor (fruity, green, seasoning and lactic, 2 for aroma (fruit and seasoning, 2 for basic tastes (acid and bitter and 1 for texture (crunchy. The Aloreña olive from Málaga is characterized by its fruity and seasoning odor and aroma, bitter taste and crunchy texture.

    Se presenta el programa de formación de catadores para la Denominación de Origen Protegida (DOP “Aceituna Aloreña de Málaga”. Este programa, de 52 h de duración, se realiza en 2 etapas: una primera de selección (4 h donde se eligen a los candidatos más adecuados entre industriales y técnicos del sector y una segunda de entrenamiento (48h que consta de 2 fases: una primera general (12h donde los catadores aprenden el vocabulario y desarrollan la memoria sensorial y una segunda específica (36h donde se establece la forma de preparación de la muestra, las condiciones del ensayo, la hoja de perfil y los criterios de aceptación y rechazo para la DOP. Se valoran 9 atributos sensoriales: 4 de olor (frutado, verde/hierba, aliño y láctico, 2 de

  12. Overview of the European Fusion Programme

    International Nuclear Information System (INIS)

    Maisonnier, C.; Toschi, R.

    1989-01-01

    An overview of the European Fusion Programme is given and its near-term and long-term strategies are outlined. With the long-term energy problem worldwide as background, the role of thermonuclear fusion research is discussed in the context of energy sources having the potential to supply a substantial fraction of the electrical energy needs in the future. The European Fusion Programme, which is designed to lead in due course to the joint construction of prototypes with a view to their industrial production and marketing, is implemented by a sliding programme concept, i.e. through five-year programmes which overlap for about two years. The main objectives of the proposed 1987-1991 programme are outlined, with emphasis on the role of the Next Step (a Next European Torus or an International Thermonuclear Experimental Reactor), of the JET Joint Undertaking, of the Associated Laboratories, and of the European industry; and on the importance of international cooperation which has been established by bilateral framework agreements on fusion, by several multilateral implementing agreements in the frame of the IEA (OECD), and by the quadripartite cooperation of EURATOM, Japan, USA and USSR in the conceptual design of an International Thermonuclear Experimental Reactor under the auspices of the IAEA. (orig.)

  13. The thickness design of unintentionally doped GaN interlayer matched with background doping level for InGaN-based laser diodes

    Energy Technology Data Exchange (ETDEWEB)

    Chen, P.; Zhao, D. G., E-mail: dgzhao@red.semi.ac.cn; Jiang, D. S.; Zhu, J. J.; Liu, Z. S.; Yang, J.; Li, X.; Le, L. C.; He, X. G.; Liu, W.; Li, X. J.; Liang, F. [State Key Laboratory of Integrated Optoelectronics, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083 (China); Zhang, B. S.; Yang, H. [Key Laboratory of Nano-devices and Applications of CAS, Suzhou Institute of Nano-tech and Nano-bionics, Chinese Academy of Sciences, Suzhou 215123 (China); Zhang, Y. T.; Du, G. T. [State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130023 (China)

    2016-03-15

    In order to reduce the internal optical loss of InGaN laser diodes, an unintentionally doped GaN (u-GaN) interlayer is inserted between InGaN/GaN multiple quantum well active region and Al{sub 0.2}Ga{sub 0.8}N electron blocking layer. The thickness design of u-GaN interlayer matching up with background doping level for improving laser performance is studied. It is found that a suitably chosen u-GaN interlayer can well modulate the optical absorption loss and optical confinement factor. However, if the value of background doping concentration of u-GaN interlayer is too large, the output light power may decrease. The analysis of energy band diagram of a LD structure with 100 nm u-GaN interlayer shows that the width of n-side depletion region decreases when the background concentration increases, and may become even too small to cover whole MQW, resulting in a serious decrease of the output light power. It means that a suitable interlayer thickness design matching with the background doping level of u-GaN interlayer is significant for InGaN-based laser diodes.

  14. The thickness design of unintentionally doped GaN interlayer matched with background doping level for InGaN-based laser diodes

    Directory of Open Access Journals (Sweden)

    P. Chen

    2016-03-01

    Full Text Available In order to reduce the internal optical loss of InGaN laser diodes, an unintentionally doped GaN (u-GaN interlayer is inserted between InGaN/GaN multiple quantum well active region and Al0.2Ga0.8N electron blocking layer. The thickness design of u-GaN interlayer matching up with background doping level for improving laser performance is studied. It is found that a suitably chosen u-GaN interlayer can well modulate the optical absorption loss and optical confinement factor. However, if the value of background doping concentration of u-GaN interlayer is too large, the output light power may decrease. The analysis of energy band diagram of a LD structure with 100 nm u-GaN interlayer shows that the width of n-side depletion region decreases when the background concentration increases, and may become even too small to cover whole MQW, resulting in a serious decrease of the output light power. It means that a suitable interlayer thickness design matching with the background doping level of u-GaN interlayer is significant for InGaN-based laser diodes.

  15. [The methods within the evaluation of disease management programmes in control-group designs using the example of diabetes mellitus - a systematic literature review].

    Science.gov (United States)

    Drabik, A; Sawicki, P T; Müller, D; Passon, A; Stock, S

    2012-08-01

    Disease management programmes (DMPs) were implemented in Germany in 2002. Their evaluation is required by law. Beyond the mandatory evaluation, a growing number of published studies evaluate the DMP for diabetes mellitus type 2 in a control-group design. As patients opt into the programme on a voluntary basis it is necessary to adjust the inherent selection bias between groups. The aim of this study is to review published studies which evaluate the diabetes DMP using a control-group design with respect to the methods used. A systematic literature review of electronic databases (PUBMED, Cochrane Library, EMBASE, MEDPILOT) and a hand search of reference lists of the relevant publications was conducted to identify studies evaluating the DMP diabetes mellitus in a control-group design. 8 studies were included in the systematic literature review. 4 studies gathered retrospective claims data from sickness funds, one from physician's records, one study used prospective data from ambulatory care, and 2 studies were based on one patient survey. Methods used for adjustment of selection bias included exact matching, matching using propensity score methods, age-adjusted and sex-separated analysis, and adjustment in a regression model/analysis of covariance. One study did not apply adjustment methods. The intervention period ranged from 1 day to 4 years. Considered outcomes of studies (surrogate parameter, diabetes complications, mortality, quality of life, and claim data) depended on the database. In the evaluation of the DMP diabetes mellitus based on a control-group design neither the database nor the methods used for selection bias adjustment were consistent in the available studies. Effectiveness of DMPs cannot be judged based on this review due to heterogeneity of study designs. To allow for a comprehensive programme evaluation standardised minimum requirements for the evaluation of DMPs in the control group design are required. © Georg Thieme Verlag KG Stuttgart · New

  16. Effects of background color and symbol arrangement cues on construction of multi-symbol messages by young children without disabilities: implications for aided AAC design.

    Science.gov (United States)

    Thistle, Jennifer J; Wilkinson, Krista

    2017-09-01

    Children whose speech does not meet their communication needs often benefit from augmentative and alternative communication (AAC). The design of an AAC display may influence the child's ability to communicate effectively. The current study examined how symbol background color cues and symbol arrangement affected construction of multi-symbol messages using line-drawing symbols, by young children with typical development. Participants (N = 52) heard a spoken phrase matching a photograph and selected line drawings within a 4 × 4 array. Friedman two-way ANOVAs evaluated speed and accuracy of multi-symbol message construction under four conditions in which the background color and arrangement of symbols was manipulated. Participants demonstrated significantly faster response times when symbols were arranged by word-class category compared to no symbol arrangement. The majority of children responded faster when symbols had white backgrounds, but this effect failed to reach statistical significance. This study provides preliminary evidence suggesting the importance of symbol arrangement for young children. The findings highlight the need for caution when incorporating background color on displays for young children. Future research is needed to examine the effect of visual cues on children who use AAC and consider additional factors that could influence efficacy of symbol arrangement and background color use.

  17. Background radiation

    International Nuclear Information System (INIS)

    Arnott, D.

    1985-01-01

    The effects of background radiation, whether natural or caused by man's activities, are discussed. The known biological effects of radiation in causing cancers or genetic mutations are explained. The statement that there is a threshold below which there is no risk is examined critically. (U.K.)

  18. Assessment and prevention of acute health effects of weather conditions in Europe, the PHEWE project: background, objectives, design

    Directory of Open Access Journals (Sweden)

    Anderson Hugh

    2007-04-01

    Full Text Available Abstract Background The project "Assessment and prevention of acute health effects of weather conditions in Europe" (PHEWE had the aim of assessing the association between weather conditions and acute health effects, during both warm and cold seasons in 16 European cities with widely differing climatic conditions and to provide information for public health policies. Methods The PHEWE project was a three-year pan-European collaboration between epidemiologists, meteorologists and experts in public health. Meteorological, air pollution and mortality data from 16 cities and hospital admission data from 12 cities were available from 1990 to 2000. The short-term effect on mortality/morbidity was evaluated through city-specific and pooled time series analysis. The interaction between weather and air pollutants was evaluated and health impact assessments were performed to quantify the effect on the different populations. A heat/health watch warning system to predict oppressive weather conditions and alert the population was developed in a subgroup of cities and information on existing prevention policies and of adaptive strategies was gathered. Results Main results were presented in a symposium at the conference of the International Society of Environmental Epidemiology in Paris on September 6th 2006 and will be published as scientific articles. The present article introduces the project and includes a description of the database and the framework of the applied methodology. Conclusion The PHEWE project offers the opportunity to investigate the relationship between temperature and mortality in 16 European cities, representing a wide range of climatic, socio-demographic and cultural characteristics; the use of a standardized methodology allows for direct comparison between cities.

  19. The fully integrated biomedical engineering programme at Eindhoven University of Technology.

    Science.gov (United States)

    Slaaf, D W; van Genderen, M H P

    2009-05-01

    The development of a fully integrated biomedical engineering programme (life sciences included from the start) is described. Details are provided about background, implementation, and didactic concept: design centred learning combined with courses. The curriculum has developed into a bachelor-master's programme with two different master's degrees: Master's Degree in Biomedical Engineering and Master's Degree in Medical Engineering. Recently, the programme has adopted semester programming, has included a major and minor in the bachelor's degree phase, and a true bachelor's degree final project. Details about the programme and data about where graduates find jobs are provided in this paper.

  20. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1984-04-01

    KfK participates to the Fusion Technology Programme of the European Community. Most of the work in progress addresses the Next European Torus (NET) and the long term technology aspects as defined in the 82/86 programme. A minor part serves to preparation of future contributions and to design studies on fusion concepts in a wider perspective. The Fusion Technology Programme of Euratom covers mainly aspects of nuclear engineering. Plasma engineering, heating, refueling and vacuum technology are at present part of the Physics Programme. In view of NET, integration of the different areas of work will be mandatory. KfK is therefore prepared to address technical aspects beyond the actual scope of the physics experiments. The technology tasks are reported project wise under title and code of the Euratom programme. Most of the projects described here are shared with other European fusion laboratories as indicated in the table annexed to this report. (orig./GG)

  1. Effects of a dietary self-management programme for community-dwelling older adults: a quasi-experimental design.

    Science.gov (United States)

    Chen, Su-Hui; Huang, Yu-Ping; Shao, Jung-Hua

    2017-09-01

    Nutritional health plays a crucial role in determining successful ageing and differs by different living area. Although nutritional interventions have long been advocated, little research has directly assessed the effectiveness of nutritional interventions on community-dwelling older adults in urban and rural areas and compared intervention effects on these two populations. To examine the effectiveness of a 12-week dietary self-management programme for salt-, fluid-, fat- and cholesterol-intake behaviours of community-dwelling older adults and to compare these effects in rural- and urban-dwelling older adults. For this quasi-experimental two-group study, older adults (≥65 years old) were recruited from two randomly selected public health centres in a rural north-eastern county and a northern city of Taiwan from January through December 2011. Outcomes included nutritional status, nutritional self-efficacy and health locus of control. Data were collected at baseline and 12 weeks later. To compare changes in outcome variables over time between the control (usual care) and intervention (nutritional programme) groups and between the urban- and rural-dwelling participants in the experimental group, we used generalised estimating equation analysis. Of the 129 participants, 120 completed this study (58 in the intervention group and 62 in the control group). After 12 weeks, the intervention group had significantly better nutritional status and higher internal health locus of control than the control group. Moreover, older rural participants who received the intervention tended towards higher nutritional self-efficacy and internal health locus of control than their urban counterparts. Our research findings support the positive effect of our nutritional self-management programme for community-dwelling older adults. The knowledge gained from this study can help stakeholders recognise the need for healthcare policy to establish effective strategies and sustainable

  2. Impact of parental weight status on a school-based weight management programme designed for Mexican-American children.

    Science.gov (United States)

    Moreno, J P; Johnston, C A; Hernandez, D C; LeNoble, J; Papaioannou, M A; Foreyt, J P

    2016-10-01

    While overweight and obese children are more likely to have overweight or obese parents, less is known about the effect of parental weight status on children's success in weight management programmes. This study was a secondary data analysis of a randomized controlled trial and investigated the impact of having zero, one or two obese parents on children's success in a school-based weight management programme. Sixty-one Mexican-American children participated in a 24-week school-based weight management intervention which took place in 2005-2006. Children's heights and weights were measured at baseline, 3, 6 and 12 months. Parental weight status was assessed at baseline. Repeated measures anova and ancova were conducted to compare changes in children's weight within and between groups, respectively. Within-group comparisons revealed that the intervention led to significant decreases in standardized body mass index (zBMI) for children with zero (F = 23.16, P weight management programme appears to be most efficacious for children with one or no obese parents compared to children with two obese parents. These results demonstrate the need to consider parental weight status when engaging in childhood weight management efforts. © 2015 World Obesity.

  3. Methods for economic evaluation of a factorial-design cluster randomised controlled trial of a nutrition supplement and an exercise programme among healthy older people living in Santiago, Chile: the CENEX study

    Directory of Open Access Journals (Sweden)

    Walker Damian G

    2009-05-01

    Full Text Available Abstract Background In an effort to promote healthy ageing and preserve health and function, the government of Chile has formulated a package of actions into the Programme for Complementary Food in Older People (Programa de Alimentación Complementaria para el Adulto Mayor - PACAM. The CENEX study was designed to evaluate the impact, cost and cost-effectiveness of the PACAM and a specially designed exercise programme on pneumonia incidence, walking capacity and body mass index in healthy older people living in low- to medium-socio-economic status areas of Santiago. The purpose of this paper is to describe in detail the methods that will be used to estimate the incremental costs and cost-effectiveness of the interventions. Methods and design The base-case analysis will adopt a societal perspective, including the direct medical and non-medical costs borne by the government and patients. The cost of the interventions will be calculated by the ingredients approach, in which the total quantities of goods and services actually employed in applying the interventions will be estimated, and multiplied by their respective unit prices. Relevant information on costs of interventions will be obtained mainly from administrative records. The costs borne by patients will be collected via exit and telephone interviews. An annual discount rate of 8% will be used, consistent with the rate recommended by the Government of Chile. All costs will be converted from Chilean Peso to US dollars with the 2007 average period exchange rate of US$1 = 522.37 Chilean Peso. To test the robustness of model results, we will vary the assumptions over a plausible range in sensitivity analyses. Discussion The protocol described here indicates our intent to conduct an economic evaluation alongside the CENEX study. It provides a detailed and transparent statement of planned data collection methods and analyses. Trial registration ISRCTN48153354

  4. WHEDA study: Effectiveness of occupational therapy at home for older people with dementia and their caregivers - the design of a pragmatic randomised controlled trial evaluating a Dutch programme in seven German centres

    Directory of Open Access Journals (Sweden)

    Vernooij-Dassen Myrra

    2009-10-01

    Full Text Available Abstract Background A recent Dutch mono-centre randomised controlled trial has shown that occupational therapy improves daily functioning in dementia. The aim of this present study is to compare the effects of the Dutch community occupational therapy programme with a community occupational therapy consultation on daily functioning in older people with mild or moderate dementia and their primary caregivers in a German multi-centre context. Methods/Design A multi-centre single blind randomised controlled trial design is being used in seven health care centres (neurological, psychiatric and for older people in urban regions. Patients are 1:1 randomised to treatment or control group. Assessors are blind to group assignment and perform measurements on both groups at baseline, directly after intervention at 6 weeks and at 16, 26 and 52 weeks follow-up. A sample of 140 community dwelling older people (aged >65 years with mild or moderate dementia and their primary caregivers is planned. The experimental intervention consists of an evidence-based community occupational therapy programme including 10 sessions occupational therapy at home. The control intervention consists of one community occupational therapy consultation based on information material of the Alzheimer Society. Providers of both interventions are occupational therapists experienced in treatment of cognitively impaired older people and trained in both programmes. 'Community' indicates that occupational therapy intervention occurs in the person's own home. The primary outcome is patients' daily functioning assessed with the performance scale of the Interview for Deterioration in Daily Living Activities in Dementia and video tapes of daily activities rated by external raters blind to group assignment using the Perceive, Recall, Plan and Perform System of Task Analysis. Secondary outcomes are patients' and caregivers' quality of life, mood and satisfaction with treatment; the caregiver

  5. Optical programmable metamaterials

    Science.gov (United States)

    Gong, Cheng; Zhang, Nan; Dai, Zijie; Liu, Weiwei

    2018-02-01

    We suggest and demonstrate the concept of optical programmable metamaterials which can configure the device's electromagnetic parameters by the programmable optical stimuli. In such metamaterials, the optical stimuli produced by a FPGA controlled light emitting diode array can switch or combine the resonance modes which are coupled in. As an example, an optical programmable metamaterial terahertz absorber is proposed. Each cell of the absorber integrates four meta-rings (asymmetric 1/4 rings) with photo-resistors connecting the critical gaps. The principle and design of the metamaterials are illustrated and the simulation results demonstrate the functionalities for programming the metamaterial absorber to change its bandwidth and resonance frequency.

  6. Real time imaging and infrared background scene analysis using the Naval Postgraduate School infrared search and target designation (NPS-IRSTD) system

    Science.gov (United States)

    Bernier, Jean D.

    1991-09-01

    The imaging in real time of infrared background scenes with the Naval Postgraduate School Infrared Search and Target Designation (NPS-IRSTD) System was achieved through extensive software developments in protected mode assembly language on an Intel 80386 33 MHz computer. The new software processes the 512 by 480 pixel images directly in the extended memory area of the computer where the DT-2861 frame grabber memory buffers are mapped. Direct interfacing, through a JDR-PR10 prototype card, between the frame grabber and the host computer AT bus enables each load of the frame grabber memory buffers to be effected under software control. The protected mode assembly language program can refresh the display of a six degree pseudo-color sector in the scanner rotation within the two second period of the scanner. A study of the imaging properties of the NPS-IRSTD is presented with preliminary work on image analysis and contrast enhancement of infrared background scenes.

  7. Effective public involvement in the HoST-D Programme for dementia home care support: From proposal and design to methods of data collection (innovative practice).

    Science.gov (United States)

    Giebel, Clarissa; Roe, Brenda; Hodgson, Anthony; Britt, David; Clarkson, Paul

    2017-01-01

    Public involvement is an important element in health and social care research. However, it is little evaluated in research. This paper discusses the utility and impact of public involvement of carers and people with dementia in a five-year programme on effective home support in dementia, from proposal and design to methods of data collection, and provides a useful guide for future research on how to effectively involve the public. The Home SupporT in Dementia (HoST-D) Programme comprises two elements of public involvement, a small reference group and a virtual lay advisory group. Involving carers and people with dementia is based on the six key values of involvement - respect, support, transparency, responsiveness, fairness of opportunity, and accountability. Carers and people with dementia gave opinions on study information, methods of data collection, an economic model, case vignettes, and a memory aid booklet, which were all taken into account. Public involvement has provided benefits to the programme whilst being considerate of the time constraints and geographical locations of members.

  8. Status and perspectives for wind energy within the programme for the development of renewable energy. Background report for the document entitled 'Handlingsplan for Vedvarende Energi 1995-97' produced by the Committee for Renewable Energy

    International Nuclear Information System (INIS)

    1995-08-01

    The report, which is intended to comprise the basis for the document 'Plan of Management for Renewable Energy 1995-97' produced by the (Danish) Committee for Renewable Energy, updates information on wind technology and its implementation and describes the status of wind energy as found in the relevant section contained in the Danish development programme for renewable energy. An evaluation is presented of the future perspectives for wind energy with regard to technological developments, market potential and overall costs. A detailed list is given of approved, rejected and concluded Danish projects relevant to wind energy under the Programme for the Development of Wind Energy during the period 1991-1994 and a global status for wind power status and estimates in MW ranging under the headings: New capacity in 1994, Estimated capacity in 1994 and Estimated capacity in 2000. (AB)

  9. Lasting impact of an implemented self-management programme for people with type 2 diabetes referred from primary care: a one-group, before-after design.

    Science.gov (United States)

    Fløde, Mari; Iversen, Marjolein M; Aarflot, Morten; Haltbakk, Johannes

    2017-12-01

    Research interventions in uniform clinical settings and in patients fulfilling well-defined inclusion criteria might show a more pronounced effect than implementing the same intervention in existing practice. Diabetes Self-Management Education (DSME) is complex, and should be assessed in existing practice as it is an intervention widely implemented. To examine the impact of an established group-based DSME in unselected people with type 2 diabetes referred from primary care. A one-group, before-after design was used for assessments before, immediately after, and 3 months after participation in a group-based DSME programme conducted at two Learning and Mastering Centres in Norway between November 2013 and June 2014. Participants completed a questionnaire before (n = 115), immediately after (n = 95) and 3 months after (n = 42) the DSME programme. Primary outcome measure was diabetes knowledge (Michigan Diabetes Knowledge Test). Also patient activation (Patient Activation Measure [PAM]) and self-efficacy (General Self-Efficacy scale [GSE]) were measured. Changes in outcome measures were analysed using paired t-tests for normally distributed data and Wilcoxon signed-rank test for skewed data. Mean knowledge improved significantly from baseline (p < 0.001). Changes persisted at the 3-month assessment. Mean PAM scores improved significantly from baseline (p < 0.001), and changes persisted for 3 months. Mean GSE scores improved from baseline (p = 0.022) and persisted for 3 months. However, when results were stratified for participants who responded at all three time points, GSE showed no change during the study period. The complexity self-management in the individual is challenging to reflect in DSME. This implemented DSME programme for people with type 2 diabetes improved levels of diabetes knowledge and patient activation, persisting for at least 3 months. Hence, the DSME programme appears to be robust beyond standardised research settings, in educating unselected

  10. Designing evaluation studies to optimally inform policy: what factors do policy-makers in China consider when making resource allocation decisions on healthcare worker training programmes?

    Science.gov (United States)

    Wu, Shishi; Legido-Quigley, Helena; Spencer, Julia; Coker, Richard James; Khan, Mishal Sameer

    2018-02-23

    In light of the gap in evidence to inform future resource allocation decisions about healthcare provider (HCP) training in low- and middle-income countries (LMICs), and the considerable donor investments being made towards training interventions, evaluation studies that are optimally designed to inform local policy-makers are needed. The aim of our study is to understand what features of HCP training evaluation studies are important for decision-making by policy-makers in LMICs. We investigate the extent to which evaluations based on the widely used Kirkpatrick model - focusing on direct outcomes of training, namely reaction of trainees, learning, behaviour change and improvements in programmatic health indicators - align with policy-makers' evidence needs for resource allocation decisions. We use China as a case study where resource allocation decisions about potential scale-up (using domestic funding) are being made about an externally funded pilot HCP training programme. Qualitative data were collected from high-level officials involved in resource allocation at the national and provincial level in China through ten face-to-face, in-depth interviews and two focus group discussions consisting of ten participants each. Data were analysed manually using an interpretive thematic analysis approach. Our study indicates that Chinese officials not only consider information about the direct outcomes of a training programme, as captured in the Kirkpatrick model, but also need information on the resources required to implement the training, the wider or indirect impacts of training, and the sustainability and scalability to other settings within the country. In addition to considering findings presented in evaluation studies, we found that Chinese policy-makers pay close attention to whether the evaluations were robust and to the composition of the evaluation team. Our qualitative study indicates that training programme evaluations that focus narrowly on direct training

  11. An appraisal of female sex work in Nigeria--implications for designing and scaling up HIV prevention programmes.

    Science.gov (United States)

    Ikpeazu, Akudo; Momah-Haruna, Amaka; Madu Mari, Baba; Thompson, Laura H; Ogungbemi, Kayode; Daniel, Uduak; Aboki, Hafsatu; Isac, Shajy; Gorgens, Marelize; Mziray, Elizabeth; Njie, Ndella; Akala, Francisca Ayodeji; Emmanuel, Faran; Odek, Willis Omondi; Blanchard, James F

    2014-01-01

    The HIV epidemic in Nigeria is complex with diverse factors driving the epidemic. Accordingly, Nigeria's National Agency for the Control of AIDS is coordinating a large-scale initiative to conduct HIV epidemic appraisals across all states. These appraisals will help to better characterize the drivers of the epidemic and ensure that the HIV prevention programmes match the local epidemic context, with resources allocated to interventions that have the greatest impact locally. Currently, the mapping and size estimation of Female Sex Workers (FSWs)--a major component of the appraisal has been completed in seven states. These states are using the data generated to plan, prioritize and scale-up sub-national HIV prevention programmes. It involved a two-level process of identifying and validating locations where FSWs solicit and/or meet clients ("hotspots"). In the first level, secondary key informants were interviewed to collect information about the geographic location and description of the hotspots. For the second level, FSWs were interviewed at each hotspot and information on population size estimates, typologies and operational dynamics of the FSWs were collected. Across the seven states, a total of 17,266 secondary key informants and 5,732 FSWs were interviewed. 10,233 hotspots were identified with an estimated 126,489 FSWs ranging from 5,920 in Anambra to 46,691 in Lagos. The most common hotspots were bars/nightclubs (30%), hotels/lodges (29.6%), streets (16.6%), and brothels (14.6%). Furthermore, the population density of FSWs (per thousand adult men) across the states ranged from 2 in Anambra to 17 in the Federal Capital Territory. FSW populations in Nigeria are large and diverse, with substantial differences between and within states. Improved understanding of the location, population size, density, organizational typologies and clients of sex work has informed and is central to Nigeria's planning process for scaling up focused HIV prevention programmes.

  12. Design verification enhancement of field programmable gate array-based safety-critical I&C system of nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, Ibrahim [Department of Nuclear Engineering, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin-si, Gyeonggi-do 17104 (Korea, Republic of); Jung, Jaecheon, E-mail: jcjung@kings.ac.kr [Department of Nuclear Power Plant Engineering, KEPCO International Nuclear Graduate School, 658-91 Haemaji-ro, Seosang-myeon, Ulju-gun, Ulsan 45014 (Korea, Republic of); Heo, Gyunyoung [Department of Nuclear Engineering, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin-si, Gyeonggi-do 17104 (Korea, Republic of)

    2017-06-15

    Highlights: • An enhanced, systematic and integrated design verification approach is proposed for V&V of FPGA-based I&C system of NPP. • RPS bistable fixed setpoint trip algorithm is designed, analyzed, verified and discussed using the proposed approaches. • The application of integrated verification approach simultaneously verified the entire design modules. • The applicability of the proposed V&V facilitated the design verification processes. - Abstract: Safety-critical instrumentation and control (I&C) system in nuclear power plant (NPP) implemented on programmable logic controllers (PLCs) plays a vital role in safe operation of the plant. The challenges such as fast obsolescence, the vulnerability to cyber-attack, and other related issues of software systems have currently led to the consideration of field programmable gate arrays (FPGAs) as an alternative to PLCs because of their advantages and hardware related benefits. However, safety analysis for FPGA-based I&C systems, and verification and validation (V&V) assessments still remain important issues to be resolved, which are now become a global research point of interests. In this work, we proposed a systematic design and verification strategies from start to ready-to-use in form of model-based approaches for FPGA-based reactor protection system (RPS) that can lead to the enhancement of the design verification and validation processes. The proposed methodology stages are requirement analysis, enhanced functional flow block diagram (EFFBD) models, finite state machine with data path (FSMD) models, hardware description language (HDL) code development, and design verifications. The design verification stage includes unit test – Very high speed integrated circuit Hardware Description Language (VHDL) test and modified condition decision coverage (MC/DC) test, module test – MATLAB/Simulink Co-simulation test, and integration test – FPGA hardware test beds. To prove the adequacy of the proposed

  13. Design verification enhancement of field programmable gate array-based safety-critical I&C system of nuclear power plant

    International Nuclear Information System (INIS)

    Ahmed, Ibrahim; Jung, Jaecheon; Heo, Gyunyoung

    2017-01-01

    Highlights: • An enhanced, systematic and integrated design verification approach is proposed for V&V of FPGA-based I&C system of NPP. • RPS bistable fixed setpoint trip algorithm is designed, analyzed, verified and discussed using the proposed approaches. • The application of integrated verification approach simultaneously verified the entire design modules. • The applicability of the proposed V&V facilitated the design verification processes. - Abstract: Safety-critical instrumentation and control (I&C) system in nuclear power plant (NPP) implemented on programmable logic controllers (PLCs) plays a vital role in safe operation of the plant. The challenges such as fast obsolescence, the vulnerability to cyber-attack, and other related issues of software systems have currently led to the consideration of field programmable gate arrays (FPGAs) as an alternative to PLCs because of their advantages and hardware related benefits. However, safety analysis for FPGA-based I&C systems, and verification and validation (V&V) assessments still remain important issues to be resolved, which are now become a global research point of interests. In this work, we proposed a systematic design and verification strategies from start to ready-to-use in form of model-based approaches for FPGA-based reactor protection system (RPS) that can lead to the enhancement of the design verification and validation processes. The proposed methodology stages are requirement analysis, enhanced functional flow block diagram (EFFBD) models, finite state machine with data path (FSMD) models, hardware description language (HDL) code development, and design verifications. The design verification stage includes unit test – Very high speed integrated circuit Hardware Description Language (VHDL) test and modified condition decision coverage (MC/DC) test, module test – MATLAB/Simulink Co-simulation test, and integration test – FPGA hardware test beds. To prove the adequacy of the proposed

  14. The French nuclear programme

    International Nuclear Information System (INIS)

    Bacher, Pierre

    1987-01-01

    France has a civil nuclear power generation programme second only to the USA with 49 nuclear units in operation and 13 under construction. The units in service are described. These include 33 PWR 900 MW and 9 PWR 1300 MW units. The electricity consumption and generation in France is illustrated. The absence of a powerful anti-nuclear lobby and two main technical options have contributed to the success of the French nuclear programme. These are the PWR design and the plant standardization policy which allows the setting up of an effective industrial complex (eg for analysis of operating conditions and of safety and reliability information). The programme and the reasons for its success are reviewed. Research programmes and future plans are also discussed. (UK)

  15. An Information Theory-Inspired Strategy for Design of Re-programmable Encrypted Graphene-based Coding Metasurfaces at Terahertz Frequencies.

    Science.gov (United States)

    Momeni, Ali; Rouhi, Kasra; Rajabalipanah, Hamid; Abdolali, Ali

    2018-04-18

    Inspired by the information theory, a new concept of re-programmable encrypted graphene-based coding metasurfaces was investigated at terahertz frequencies. A channel-coding function was proposed to convolutionally record an arbitrary information message onto unrecognizable but recoverable parity beams generated by a phase-encrypted coding metasurface. A single graphene-based reflective cell with dual-mode biasing voltages was designed to act as "0" and "1" meta-atoms, providing broadband opposite reflection phases. By exploiting graphene tunability, the proposed scheme enabled an unprecedented degree of freedom in the real-time mapping of information messages onto multiple parity beams which could not be damaged, altered, and reverse-engineered. Various encryption types such as mirroring, anomalous reflection, multi-beam generation, and scattering diffusion can be dynamically attained via our multifunctional metasurface. Besides, contrary to conventional time-consuming and optimization-based methods, this paper convincingly offers a fast, straightforward, and efficient design of diffusion metasurfaces of arbitrarily large size. Rigorous full-wave simulations corroborated the results where the phase-encrypted metasurfaces exhibited a polarization-insensitive reflectivity less than -10 dB over a broadband frequency range from 1 THz to 1.7 THz. This work reveals new opportunities for the extension of re-programmable THz-coding metasurfaces and may be of interest for reflection-type security systems, computational imaging, and camouflage technology.

  16. Crispv programme

    International Nuclear Information System (INIS)

    Marinkovicj, N.

    CRISPV (Criticality and Spectrum code) is a multigroup neutron spectrum code for homogeneous reactor cores and is actually a somewhat modified version of the original CRISP programme. It is a combination of DATAPREP-II and BIGG-II programmes. It is assumed that the reactor cell is a cylindrical fuel rod in the light or heavy water moderator. DATEPREP-II CODE forms the multigroup data for homogeneous reactor and prepares the input parameters for the BIGG-II code. It has its own nuclear data library on a separate tape in binary mode. BIGG-II code is a multigroup neutron spectrum and criticality code for a homogenized medium. It has as well its own separate data library. In the CRISPV programme the overlay structure enables automatic handling of data calculated in the DATAPREP-II programme and needed in the BIGG-II core. Both programmes are written in FORTRAN for CDC 3600. Using the programme is very efficient and simple

  17. The 'Walking for Wellbeing in the West' randomised controlled trial of a pedometer-based walking programme in combination with physical activity consultation with 12 month follow-up: rationale and study design

    Directory of Open Access Journals (Sweden)

    Ogilvie David

    2008-07-01

    Full Text Available Abstract Background Scotland has a policy aimed at increasing physical activity levels in the population, but evidence on how to achieve this is still developing. Studies that focus on encouraging real world participants to start physical activity in their settings are needed. The Walking for Well-being in the West study was designed to assess the effectiveness of a pedometer-based walking programme in combination with physical activity consultation. The study was multi-disciplinary and based in the community. Walking for Well-being in the West investigated whether Scottish men and women, who were not achieving the current physical activity recommendation, increased and maintained walking behaviour over a 12 month period. This paper outlines the rationale and design of this innovative and pragmatic study. Methods Participants were randomised into two groups: Group 1: Intervention (pedometer-based walking programme combined with a series of physical activity consultations; Group 2: Waiting list control for 12 weeks (followed by minimal pedometer-based intervention. Physical activity (primary outcome was measured using pedometer step counts (7 day and the International Physical Activity Questionnaire (long version. Psychological processes were measured using questionnaires relating to the Transtheoretical Model of Behaviour Change, mood (Positive and Negative Affect Schedule and quality of life (Euroqol EQ-5D instrument. Physiological measures included anthropometric and metabolic outcomes. Environmental influences were assessed subjectively (Neighbourhood Quality of Life Survey and objectively (neighbourhood audit tool and GIS mapping. The qualitative evaluation employed observation, semi-structured interviews and focus groups. A supplementary study undertook an economic evaluation. Discussion Data analysis is on-going. Walking for Well-being in the West will demonstrate if a pedometer based walking programme, in combination with physical

  18. A Peer Review of the RPII Environmental Monitoring Programme

    International Nuclear Information System (INIS)

    Mitchell, P.; Hunt, J.; Ledgerwood, K.; Nielsen, S.; O'Donnell, C

    2009-12-01

    The RPII has since the early 1980s carried out an environmental monitoring programme covering radioactivity in air, food and water. The primary focus of this programme has been the assessment of human exposure and the protection of human health. The programme aims to meet Irish and European Union legal requirements, other national and international commitments and to support the RPII's advisory and information provision functions. In 2009 the RPII had the scope and effectiveness of its monitoring programme reviewed by an international peer group. This report provides the background to the review; an overview of the documents provided to the peer group for conduction of the review; and the comments and recommendations by the peer group. The key objectives of the review was to consider whether the RPII environmental monitoring programme is meeting the stated aims and objectives and to provide recommendations for improvement if required. This exercise is part of a continual process of review and improvement of the RPII's monitoring programme. It addresses both continuous monitoring and project based elements of the programme. It was designed to be conducted at a strategic rather than an operational level

  19. Childhood obesity prevention in rural settings: background, rationale, and study design of ‘4-Health,’ a parent-only intervention

    Directory of Open Access Journals (Sweden)

    Lynch Wesley C

    2012-04-01

    Full Text Available Abstract Background Childhood obesity in rural communities is a serious but understudied problem. The current experiment aims to assess a wide range of obesity risk factors among rural youth and to offer an 8-month intervention program for parents to reduce obesity risk in their preteen child. Methods/Design A two-group, repeated measures design is used to assess the effectiveness of the 4-Health intervention program. Assessments include anthropometric measures, child self-evaluations, parent self-evaluations, and parent evaluations of child. County Extension agents from 21 rural Montana counties recruit approximately 150 parent–child dyads and counties are semi-randomly assigned to the active intervention group (4-Health Educational Program or a “best-practices” (Healthy Living Information control group. Discussion This study will shed light on the effectiveness of this parent-only intervention strategy in reducing obesity risk factors among rural preteens. The 4-Health program is designed to provide information and skills development for busy rural parents that will increase healthy lifestyles of their preteen children and improve the parents’ ability to intervene effectively in the lives of their families during this critical developmental period. Trial registration ClinicalTrials.gov ID: NCT01510587

  20. A pilot effectiveness study of the Enhancing Parenting Skills (EPaS) 2014 programme for parents of children with behaviour problems: study protocol for a randomised controlled trial

    OpenAIRE

    Williams, Margiad Elen; Hutchings, Judy

    2015-01-01

    Background The Enhancing Parenting Skills (EPaS) 2014 programme is a home-based, health visitor-delivered parenting support programme for parents of children with identified behaviour problems. This trial aims to evaluate the effectiveness of the EPaS 2014 programme compared to a waiting-list treatment as usual control group. Methods/Design This is a pragmatic, multicentre randomised controlled trial. Sixty health visitors will each be asked to identify two families that have a child scoring ...

  1. Design and development of microcontroller based programmable ramp generator for AC-DC converter for simulating decay power transient in experimental facility for nuclear power plants

    International Nuclear Information System (INIS)

    Srivastava, Gaurava Deep; Kulkarni, R.D.

    2015-01-01

    In nuclear power plants, fuel is subjected to a wide range of power and temperature transients during normal and abnormal conditions. The reactor setback and step-back power pattern, fast temperature profile occurred during Loss of Coolant Accident and decay power followed by shutdown of power plant are the typical transients in nuclear power plant. For a variety of reactor engineering and reactor safety related study, one needs to simulate these transients in experimental facility. In experimental facilities, high response AC-DC converters are used to handle these power and temperature transients safely in a controlled manner for generating a database which is utilized for design of thermal hydraulic system, development of computer codes, study of reliability of reactor safety system, etc. for nuclear power plants. The paper presents the methodology developed for simulating the typical reactor decay power transient in an experimental facility. The design and simulation of AC-DC power electronic converter of 3 MW capacity is also presented. The microcontroller based programmable ramp generator is designed and hardware implemented for feeding reference voltage to the closed loop control system of AC-DC converter for obtaining the decay power profile at the converter output. The typical decay power transient of the nuclear power plant is divided into several small power ramps for simulating the transient. The signal corresponding to each power ramp is generated by programmable ramp generator and fed to the comparator for generating control signal for the converter. The actual decay power transient obtained from the converter is compared with the theoretical decay power transient. (author)

  2. Student performance in a newly developed MSc programme

    DEFF Research Database (Denmark)

    Richelsen, Ann Bettina

    2011-01-01

    The Technical University of Denmark (DTU) offers, as a consequence of the Bologna Declaration, international Master of Science in Engineering (MSc) programmes. Thereby, one of the challenges for DTU is to evaluate international applicants with an educational engineering background and traditions...... other than DTUs and allow qualified students to enter the MSc programmes. The focus of the present work is a comparison of how international and Danish students perform within specific modules of the MSc curriculum in Engineering Design and Applied Mechanics at Technical University of Denmark...

  3. TOUCH POINTS IN UNIVERSITY TUITION - CRITICAL REFLECTIONS ON PBL TUITION PRACTICE AT THE ARCHITECTURE AND URBAN DESIGN PROGRAMMES AT AALBORG UNIVERSITY, DENMARK

    Directory of Open Access Journals (Sweden)

    Anne Kirkegaard Bejder

    2017-01-01

    Full Text Available This is a discussion paper that is based on the didactics reflections of three junior academics at the Architecture and Urban Design (A&UD programme at Aalborg University. The discussion is moored in two narratives representing two typical student tuition situations. Unfolding two touch points where PBL and architectural and engineering teaching converge, this paper discusses how ‘the problem’ and ‘supervision’ at the A&UD programme are hybrid tuition focus points, where principles of PBL and more traditional tuition styles within architecture and engineering come into contact and cause didactic friction. This friction necessitates teachers and supervisors to critically reflect upon their teaching and supervision styles, and upon how ‘the problem’ is put into play in their tuition of students. The paper argues that teachers and supervisors have a heightened obligation and responsibility to monitor, assess, reflect and adjust the integration of the different teaching approaches in their hybrid tuition practices at A&UD.

  4. Major cultural-compatibility complex: considerations on cross-cultural dissemination of patient safety programmes.

    Science.gov (United States)

    Jeong, Heon-Jae; Pham, Julius C; Kim, Minji; Engineer, Cyrus; Pronovost, Peter J

    2012-07-01

    As the importance of patient safety has been broadly acknowledged, various improvement programmes have been developed. Many of the programmes with proven efficacy have been disseminated internationally. However, some of those attempts may encounter unexpected cross-cultural obstacles and may fail to harvest the expected success. Each country has different cultural background that has shaped the behavior of the constituents for centuries. It is crucial to take into account these cultural differences in effectively disseminating these programmes. As an organ transplantation requires tissue-compatibility between the donor and the recipient, there needs to be compatibility between the country where the program was originally developed and the nation implementing the program. Though no detailed guidelines exist to predict success, small-scale pilot tests can help evaluate whether a safety programme will work in a new cultural environment. Furthermore, a pilot programme helps reveal the source of potential conflict, so we can modify the original programme accordingly to better suit the culture to which it is to be applied. In addition to programme protocols, information about the cultural context of the disseminated programme should be conveyed during dissemination. Original programme designers should work closely with partnering countries to ensure that modifications do not jeopardise the original intention of the programme. By following this approach, we might limit barriers originating from cultural differences and increase the likelihood of success in cross-cultural dissemination.

  5. Design and pilot results of a mobile phone weight-loss application for women starting a meal replacement programme.

    Science.gov (United States)

    Brindal, Emily; Hendrie, Gilly; Freyne, Jill; Coombe, Mac; Berkovsky, Shlomo; Noakes, Manny

    2013-04-01

    We developed and tested a mobile phone application (app) to support individuals embarking on a partial meal replacement programme (MRP). Overweight or obese women were randomly allocated to one of two study groups. The intervention group received an MRP Support app. The control group received a static app based on the information available with the MRP. A total of 58 adult women (Support n = 28; Control n = 30) participated in the 8-week trial. Their BMI was 26-43 kg/m 2 Usage data suggested that the intervention group were more engaged with using the app throughout the study period. Mixed modelling revealed that the difference in weight loss between the intervention and control groups (estimated mean, EM = 3.2% and 2.2% respectively) was not significant (P = 0.08). Objective data suggested that users of the Support app were more engaged than those using the control app. A total of 1098 prompts (54%) asking people in the intervention group to enter their meals were completed prior to the evening prompt. Women in the intervention group reported a greater increase in positive affect (i.e. mood) than those in the control group (EM = 0.48 and -0.01, respectively) (P = 0.012). At Week 8, those in the control group reported a greater decrease in the effort they were willing to put into staying on the diet than those who received the Support app (EM = -2.8 and -1.4, respectively) (P = 0.024). The Support app could be a useful adjunct to existing MRPs for psychological outcomes. © SAGE Publications Ltd, 2013.

  6. What promotes sustainability in Safe Community programmes?

    Directory of Open Access Journals (Sweden)

    Lindqvist Kent

    2009-01-01

    Full Text Available Abstract Background The theory and practice of safety promotion has traditionally focused on the safety of individuals. This study also includes systems, environments, and organizations. Safety promotion programmes are designed to support community health initiatives taking a bottom-up approach. This is a long-term and complex process. The aim of this study was to try to empirically identify factors that promote sustainability in the structures of programmes that are managed and coordinated by the local government. Methods Four focus group sessions with local government politicians and administrators in designated Safe Communities were conducted and analyzed using qualitative content analysis. Results Collaboration was found to be the basis for sustainability. Networks, enabling municipalities to exchange ideas, were reported to positively influence the programmes. Personal contacts rather than organizations themselves, determine whether collaboration is sustained. Participants reported an increase in cross-disciplinary collaboration among staff categories. Administrators and politicians were reported to collaborate well, which was perceived to speed up decision-making and thus to facilitate the programme work. Support from the politicians and the county council was seen as a prerequisite. Participants reported an increased willingness to share information between units, which, in their view, supports sustainability. A structure in which all local authorities' offices were located in close proximity to one another was considered to support collaboration. Appointing a public health coordinator responsible for the programme was seen as a way to strengthen the relational resources of the programme. Conclusion With a public health coordinator, the 'external' negotiating power was concentrated in one person. Also, the 'internal' programme strength increased when the coordination was based on a bureaucratic function rather than on one individual

  7. Picosecond resolution programmable delay line

    International Nuclear Information System (INIS)

    Suchenek, Mariusz

    2009-01-01

    The note presents implementation of a programmable delay line for digital signals. The tested circuit has a subnanosecond delay range programmable with a resolution of picoseconds. Implementation of the circuit was based on low-cost components, easily available on the market. (technical design note)

  8. Monitoring programme

    International Nuclear Information System (INIS)

    1994-06-01

    Her Majesty's Inspectorate of Pollution's 1992 report on its programme of monitoring radioactive substances is presented. Site operators' returns are verified and the report provides independent data on the environmental impact of authorized disposal of radioactive wastes. Radiation doses which may have been received by members of the public, fall well below the International Commission for Radiological Protection's (ICRP) recommended annual doses. (UK)

  9. A police education programme to integrate occupational safety and HIV prevention: protocol for a modified stepped-wedge study design with parallel prospective cohorts to assess behavioural outcomes

    Science.gov (United States)

    Strathdee, Steffanie A; Arredondo, Jaime; Rocha, Teresita; Abramovitz, Daniela; Rolon, Maria Luisa; Patiño Mandujano, Efrain; Rangel, Maria Gudelia; Olivarria, Horcasitas Omar; Gaines, Tommi; Patterson, Thomas L; Beletsky, Leo

    2015-01-01

    Introduction Policing practices are key drivers of HIV among people who inject drugs (PWID). This paper describes the protocol for the first study to prospectively examine the impact of a police education programme (PEP) to align law enforcement and HIV prevention. PEPs incorporating HIV prevention (including harm reduction programmes like syringe exchange) have been successfully piloted in several countries but were limited to brief pre–post assessments; the impact of PEPs on policing behaviours and occupational safety is unknown. Objectives Proyecto ESCUDO (SHIELD) aims to evaluate the efficacy of the PEP on uptake of occupational safety procedures, as assessed through the incidence of needle stick injuries (NSIs) (primary outcome) and changes in knowledge of transmission, prevention and treatment of HIV and viral hepatitis; attitudes towards PWID, adverse behaviours that interfere with HIV prevention and protective behaviours (secondary outcomes). Methods/analysis ESCUDO is a hybrid type I design that simultaneously tests an intervention and an implementation strategy. Using a modified stepped-wedge design involving all active duty street-level police officers in Tijuana (N=∼1200), we will administer one 3 h PEP course to groups of 20–50 officers until the entire force is trained. NSI incidence and geocoded arrest data will be assessed from department-wide de-identified data. Of the consenting police officers, a subcohort (N=500) will be randomly sampled from each class to undergo pre-PEP and post-PEP surveys with a semiannual follow-up for 2 years to assess self-reported NSIs, attitudes and behaviour changes. The impact on PWIDs will be externally validated through a parallel cohort of Tijuana PWIDs. Ethics/dissemination Research ethics approval was obtained from the USA and Mexico. Findings will be disseminated through open access to protocol materials through the Law Enforcement and HIV Network. Trial registration number NCT02444403. PMID:26260350

  10. SU-C-BRF-05: Design and Geometric Validation of An Externally and Internally Deformable, Programmable Lung Motion Phantom

    International Nuclear Information System (INIS)

    Cheung, Y; Sawant, A

    2014-01-01

    Purpose: Most clinically-deployed strategies for respiratory motion management in lung radiotherapy (e.g., gating, tracking) use external markers that serve as surrogates for tumor motion. However, typical lung phantoms used to validate these strategies are rigid-exterior+rigid-interior or rigid-exterior+deformable-interior. Neither class adequately represents the human anatomy, which is deformable internally as well as externally. We describe the construction and experimental validation of a more realistic, externally- and internally-deformable, programmable lung phantom. Methods: The outer shell of a commercially-available lung phantom (RS- 1500, RSD Inc.) was used. The shell consists of a chest cavity with a flexible anterior surface, and embedded vertebrae, rib-cage and sternum. A 3-axis platform was programmed with sinusoidal and six patient-recorded lung tumor trajectories. The platform was used to drive a rigid foam ‘diaphragm’ that compressed/decompressed the phantom interior. Experimental characterization comprised of mapping the superior-inferior (SI) and anterior-posterior (AP) trajectories of external and internal radioopaque markers with kV x-ray fluoroscopy and correlating these with optical surface monitoring using the in-room VisionRT system. Results: The phantom correctly reproduced the programmed motion as well as realistic effects such as hysteresis. The reproducibility of marker trajectories over multiple runs for sinusoidal as well as patient traces, as characterized by fluoroscopy, was within 0.4 mm RMS error for internal as well as external markers. The motion trajectories of internal and external markers as measured by fluoroscopy were found to be highly correlated (R=0.97). Furthermore, motion trajectories of arbitrary points on the deforming phantom surface, as recorded by the VisionRT system also showed a high correlation with respect to the fluoroscopically-measured trajectories of internal markers (R=0.92). Conclusion: We have

  11. Background, design and conceptual model of the cluster randomized multiple-component workplace study: FRamed Intervention to Decrease Occupational Muscle pain - "FRIDOM"

    Directory of Open Access Journals (Sweden)

    Jeanette Reffstrup Christensen

    2016-10-01

    Full Text Available Abstract Background Several RCT studies have aimed to reduce either musculoskeletal disorders, sickness presenteeism, sickness absenteeism or a combination of these among females with high physical work demands. These studies have provided evidence that workplace health promotion (WHP interventions are effective, but long-term effects are still uncertain. These studies either lack to succeed in maintaining intervention effects or lack to document if effects are maintained past a one-year period. This paper describes the background, design and conceptual model of the FRIDOM (FRamed Intervention to Decrease Occupational Muscle pain WHP program among health care workers. A job group characterized by having high physical work demands, musculoskeletal disorders, high sickness presenteeism - and absenteeism. Methods FRIDOM aimed to reduce neck and shoulder pain. Secondary aims were to decrease sickness presenteeism, sickness absenteeism and lifestyle-diseases such as other musculoskeletal disorders as well as metabolic-, and cardiovascular disorders – and to maintain participation to regular physical exercise training, after a one year intervention period. The entire concept was tailored to a population of female health care workers. This was done through a multi-component intervention including 1 intelligent physical exercise training (IPET, dietary advice and weight loss (DAW and cognitive behavioural training (CBT. Discussion The FRIDOM program has the potential to provide evidence-based knowledge of the pain reducing effect of a multi component WHP among a female group of employees with a high prevalence of musculoskeletal disorders and in a long term perspective evaluate the effects on sickness presenteeism and absenteeism as well as risk of life-style diseases. Trial registration NCT02843269 , 06.27.2016 - retrospectively registered.

  12. Design, Implementation and Analysis of Learner-Centered Guided In-Service Programme for Technical Teacher Education

    Directory of Open Access Journals (Sweden)

    Tiia Rüütmann

    2014-03-01

    Full Text Available The design of learner-centered guided in-service program for technical teacher education has been launched at Estonian Centre for Engineering Pedagogy at Tallinn University of Technology. The aim of the program has been facilitating the initial in-service teaching experience, involving mentoring, peer support and cognitive apprenticeship. The emphasis has been on teaching for knowledge application, including the choice of content and processes, motivation, reflection, problem-solving, choice of educational technology, effective teaching methods, teaching models and strategies ཿ concepts, tools and procedures of the field of engineering, organized in ways enabling teachers to formulate real world problems, apply and solve them. The program has been implemented since 2012 and covers IGIP curriculum requirements. In the present article the designed program is described and analyzed.

  13. Multiuser remote access to distributed heterogeneous system of programmable logic based laboratory equipment for remote digital circuits design labs

    Directory of Open Access Journals (Sweden)

    Mikhail N. Yokhin

    2017-12-01

    Full Text Available The paper contains an analysis of perspective structures of software and hardware equipment of universal digital design laboratories with the purpose of enabling laboratory classes of digital circuit design to be taken remotely. Implementation characteristics and usage experience of some of those structures applied to labs on several hardware related courses of « Computer science and computer engineering» program in NRNU MEPhI are presented. The paper also considers different aspects of usage of remote access enabled laboratory which should be taken into account to substantiate laboratory configuration from technical and economical standpoints. To increase equipment usage efficiency an approach to group several distinct projects to place them on a single FPGA chip is proposed. The paper shows advisability and gives an example of parametrizable virtual stand for remote debugging of FPGA projects.

  14. Design confirmation and demonstration for EBS: current developments in several european national programmes as part of the EP6 EURATOM Esdred project

    International Nuclear Information System (INIS)

    Bock, Ch. de; Londe, L.; Weber, H.

    2007-01-01

    In the context of the technological project ESDRED: 'Engineering Studies and Demonstration of Repository Designs', the national waste management agencies ANDRA, ONDRAF/NINAS and NAGRA are currently in the process of demonstration testing the construction of the buffer/backfill component inside the disposal drifts for high level waste (HLW). ESDRED is co-funded by the European Commission (EC) as part of the sixth Euratom research and training Framework Programme (FP6) on nuclear energy (2002-2006). The work aims to demonstrate the technical feasibility at an industrial scale of the construction of the buffer around the disposal package and/or the associated activity of backfilling the remaining voids within the disposal drift. The tests described in this paper are performed in a workshop on the surface, which will enable a better control over the test conditions and facilitate the evaluation of the test results. The following configurations are being tested: - a prefabricated buffer in a horizontal disposal cell (representative of the ANDRA design); - granular and grout backfills in a horizontal disposal drift (representative of the ONDRAF/NIRAS design); - a combination of a prefabricated and a granular buffer in a horizontal disposal drift (representative of the NAGRA design). After the preceding stages of defining the functional requirements of the buffer/backfill component, computer simulation, laboratory testing and designing the buffer prototypes or disposal drift mockups, the work is currently focused on the execution phase of the demonstration testing. The work, although conducted by the agencies in parallel, is characterised by frequent mutual status reporting and exchange of 'lessons-learned' within the context of ESDRED. The work on the in-workshop demonstrators is scheduled to be finalized by the end of 2006. (authors)

  15. Educating sexologists in a Danish university hospital in accordance with a Nordic educational programme

    DEFF Research Database (Denmark)

    Rischel, Karen; Kristensen, Ellids

    2005-01-01

    The establishment of an educational programme in sexology in a Danish university hospital is described and an overview of the historical background of the Nordic Association for Clinical Sexology (NACS) and the Nordic educational programme is presented. The Nordic Association for Clinical Sexology...... was founded in 1978. In 2000, agreement was reached on a three-level educational programme for sexologists and identical rules for authorization in the Nordic countries. After analysis of the Nordic educational programme, curricula on levels 1 and 2 as well as logbooks were designed. Employees of the clinic...... traditions to orientations encountered in other parts of the world. In continuation of the NACS curricula, we have established an educational programme for sexologists. We suggest that this can be carried out at any major sexological unit....

  16. Design of 50 MWe HTR-PBMR reactor core and nuclear power plant fuel using SRAC2006 programme

    International Nuclear Information System (INIS)

    Bima Caraka Putra; Yosaphat Sumardi; Yohannes Sardjono

    2014-01-01

    This research aims to assess the design of core and fuel of nuclear power plant type High Temperature Reactor-Pebble Bed Modular Reactor 50 MWe from the Beginning of Life (BOL) to Ending of life (EOL) with eight years operating life. The parameters that need to be analyzed in this research are the temperature distribution inside the core, quantity enrichment of U 235 , fuel composition, criticality, and temperature reactivity coefficient of the core. The research was conducted with a data set of core design parameters such as nuclides density, core and fuel dimensions, and the axial temperature distribution inside the core. Using SRAC2006 program package, the effective multiplication factor (k eff ) values obtained from the input data that has been prepared. The results show the value of the criticality of core is proportional to the addition of U 235 enrichment. The optimum enrichment obtained at 10.125% without the use of burnable poison with an excess reactivity of 3.1 2% at BOL. The addition Gd 2O3 obtained an optimum value of 12 ppm burnable poison with an excess reactivity 0.38 %. The use of Er 2O3 with an optimum value 290 ppm has an excess reactivity 1.24 % at BOL. The core temperature reactivity coefficient with and without the use of burnable poison has a negative values that indicates the nature of its inherent safety. (author)

  17. NEW DESIGN BASIC VOCATIONAL TRAINING PROGRAMMES IN THE CONTEXT OF CONSTRUCTING INNOVATION EDUCATION ENVIRONMENT OF THE UNIVERSITY

    Directory of Open Access Journals (Sweden)

    N. N. Demidova

    2016-01-01

    Full Text Available In accordance with modern educational standards, the basic professional educational programs should focus on the formation of basic research, innovative competence and initiative qualities of future highly qualified specialists.The new design is based on ideas OPOP interaction between education, science, innovation and involves a significant reorganization of the structure and content, the introduction of new forms of learning. The article explains the matrix model of project management as a condition for the establishment and implementation of a competitive basic professional educational program, reflecting the idea of complementarity and integration of education and science. The model assumes a new method of functioning of professional community and students. The provided format of the main professional educational programs allows to speak about new quality of training of competitive specialists according to challenges of the modern world.

  18. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1985-10-01

    KfK is involved in the European Fusion Programme predominantly in the NET and Fusion Technology part. The following fields of activity are covered: Studies for NET, alternative confinement concepts, and needs and issues of integral testing. Research on structural materials. Development of superconducting magnets. Gyrotron development (part of the Physics Programme). Nuclear technology (breeding materials, blanket design, tritium technology, safety and environmental aspects of fusion, remote maintenance). Reported here are status and results of work under contracts with the CEC within the NET and Technology Programme. The aim of the major part of this R and D work is the support of NET, some areas (e.g. materials, safety and environmental impact, blanket design) have a wider scope and address problems of a demonstration reactor. In the current working period, several new proposals have been elaborated to be implemented into the 85/89 Euratom Fusion Programme. New KfK contributions relate to materials research (dual beam and fast reactor irradiations, ferritic steels), to blanket engineering (MHD-effects) and to safety studies (e.g. magnet safety). (orig./GG)

  19. Interns as teachers of medical students: a pilot programme.

    LENUS (Irish Health Repository)

    Dunne, B

    2012-01-31

    BACKGROUND: In recent years, rising numbers of medical students and an increasingly demanding clinical workload has put pressures on the educational systems for medical students in the hospital. Bedside teaching remains central to education, but tutorial delivery by registrars, tutors and consultants has proven to be increasingly difficult with the greater numbers of students now in the undergraduate system. AIMS: We have performed a pilot study to determine the feasibility of developing a Junior Tutor Programme, to assist in the delivery of tutorials to undergraduate medical students. METHODS: This was designed and delivered by interns under the supervision of the academic staff in the Departments of Medicine and Surgery in Connolly Hospital. The programme was evaluated by a questionnaire filled in by the students anonymously. RESULTS: A supervised programme of tutorials delivered by interns is a potentially useful way to ensure delivery of clinical teaching to undergraduate medical students.

  20. ITER-FEAT vacuum vessel and blanket design features and implications for the R and D programme

    International Nuclear Information System (INIS)

    Ioki, K.; Cardella, A.; Elio, F.; Onozuka, M.; Daenner, W.; Koizumi, K.; Krylov, V.

    2001-01-01

    A tight fitting configuration of the VV to the plasma aids the passive plasma vertical stability, and ferromagnetic material in the VV reduces the TF ripple. The blanket modules are supported directly by the VV. A full-scale VV sector model has provided critical information related to fabrication technology, and the magnitude of welding distortions and achievable tolerances. This R and D validated the fundamental feasibility of the double-wall VV design. The blanket module configuration consists of a shield body to which a separate first wall is mounted. The separate first wall has a facet geometry consisting of multiple flat panels, where 3-D machining will not be required. A configuration with deep slits minimizes the induced eddy currents and loads. The feasibility and the robustness of solid HIP joining was demonstrated in R and D, by manufacturing and testing several small and medium scale mock-ups and finally two prototypes. Remote handling tests and assembly tests of a blanket module have demonstrated the basic feasibility of its installation and removal. (author)

  1. ITER-FEAT vacuum vessel and blanket design features and implications for the R and D programme

    International Nuclear Information System (INIS)

    Ioki, K.; Cardella, A.; Elio, F.; Onozuka, M.; Daenner, W.; Koizumi, K.; Krylov, V.A.

    2001-01-01

    A configuration in which the vacuum vessel (VV) fits tightly to the plasma aids the passive plasma vertical stability, and ferromagnetic material in the VV reduces the toroidal field ripple. The blanket modules are supported directly by the VV. A full scale VV sector model has provided critical information related to fabrication technology and for testing the magnitude of welding distortions and achievable tolerances. This R and D validated the fundamental feasibility of the double wall VV design. The blanket module configuration consists of a shield body to which a separate first wall is mounted. The separate first wall has a facet geometry consisting of multiple flat panels, where 3-D machining will not be required. A configuration with deep slits minimizes the induced eddy currents and loads. The feasibility and robustness of solid hot isostatic pressing joining were demonstrated in the R and D by manufacturing and testing several small and medium scale mock-ups and finally two prototypes. Remote handling tests and assembly tests of a blanket module have demonstrated the basic feasibility of its installation and removal. (author)

  2. ITER-FEAT vacuum vessel and blanket design features and implications for the R&D programme

    Science.gov (United States)

    Ioki, K.; Dänner, W.; Koizumi, K.; Krylov, V. A.; Cardella, A.; Elio, F.; Onozuka, M.; ITER Joint Central Team; ITER Home Teams

    2001-03-01

    A configuration in which the vacuum vessel (VV) fits tightly to the plasma aids the passive plasma vertical stability, and ferromagnetic material in the VV reduces the toroidal field ripple. The blanket modules are supported directly by the VV. A full scale VV sector model has provided critical information related to fabrication technology and for testing the magnitude of welding distortions and achievable tolerances. This R&D validated the fundamental feasibility of the double wall VV design. The blanket module configuration consists of a shield body to which a separate first wall is mounted. The separate first wall has a facet geometry consisting of multiple flat panels, where 3-D machining will not be required. A configuration with deep slits minimizes the induced eddy currents and loads. The feasibility and robustness of solid hot isostatic pressing joining were demonstrated in the R&D by manufacturing and testing several small and medium scale mock-ups and finally two prototypes. Remote handling tests and assembly tests of a blanket module have demonstrated the basic feasibility of its installation and removal.

  3. Programme evaluation: Maintaining quality in higher education ...

    African Journals Online (AJOL)

    The evaluation of educational or social programmes is paramount for establishing success or impact in higher education. Evaluation questions about programme goals (e.g. better performance of first-year students) or about the quality of programme strategies (design and implementation) and effectiveness of delivery ...

  4. Programme Evaluation: Maintaining Quality in Higher Education

    Science.gov (United States)

    Loots, A.

    2008-01-01

    The evaluation of educational or social programmes is paramount for establishing success or impact in higher education. Evaluation questions about programme goals (e.g. better performance of first-year students) or about the quality of programme strategies (design and implementation) and effectiveness of delivery (coordinator inputs and…

  5. A Model for Discussing the Quality of Technology-Enhanced Learning in Blended Learning Programmes

    Science.gov (United States)

    Casanova, Diogo; Moreira, António

    2017-01-01

    This paper presents a comprehensive model for supporting informed and critical discussions concerning the quality of Technology-Enhanced Learning in Blended Learning programmes. The model aims to support discussions around domains such as how institutions are prepared, the participants' background and expectations, the course design, and the…

  6. Overview of the Brooklyn traffic real-time ambient pollutant penetration and environmental dispersion (B-TRAPPED) study: theoretical background and model for design of field experiments.

    Science.gov (United States)

    Hahn, Intaek; Wiener, Russell W; Richmond-Bryant, Jennifer; Brixey, Laurie A; Henkle, Stacy W

    2009-12-01

    The Brooklyn traffic real-time ambient pollutant penetration and environmental dispersion (B-TRAPPED) study was a multidisciplinary field research project that investigated the transport, dispersion, and infiltration processes of traffic emission particulate matter (PM) pollutants in a near-highway urban residential area. The urban PM transport, dispersion, and infiltration processes were described mathematically in a theoretical model that was constructed to develop the experimental objectives of the B-TRAPPED study. In the study, simultaneous and continuous time-series PM concentration and meteorological data collected at multiple outdoor and indoor monitoring locations were used to characterize both temporal and spatial patterns of the PM concentration movements within microscale distances (street canyon; (2) investigating the effects of urban structures such as a tall building or an intersection on the transport and dispersion of PM; (3) studying the influence of meteorological variables on the transport, dispersion, and infiltration processes; (4) characterizing the relationships between the building parameters and the infiltration mechanisms; (5) establishing a cause-and-effect relationship between outdoor-released PM and indoor PM concentrations and identifying the dominant mechanisms involved in the infiltration process; (6) evaluating the effectiveness of a shelter-in-place area for protection against outdoor-released PM pollutants; and (7) understanding the predominant airflow and pollutant dispersion patterns within the neighborhood using wind tunnel and CFD simulations. The 10 papers in this first set of papers presenting the results from the B-TRAPPED study address these objectives. This paper describes the theoretical background and models representing the interrelated processes of transport, dispersion, and infiltration. The theoretical solution for the relationship between the time-dependent indoor PM concentration and the initial PM concentration

  7. Background, design and conceptual model of the cluster randomized multiple-component workplace study: FRamed Intervention to Decrease Occupational Muscle pain - "FRIDOM".

    Science.gov (United States)

    Christensen, Jeanette Reffstrup; Bredahl, Thomas Viskum Gjelstrup; Hadrévi, Jenny; Sjøgaard, Gisela; Søgaard, Karen

    2016-10-24

    Several RCT studies have aimed to reduce either musculoskeletal disorders, sickness presenteeism, sickness absenteeism or a combination of these among females with high physical work demands. These studies have provided evidence that workplace health promotion (WHP) interventions are effective, but long-term effects are still uncertain. These studies either lack to succeed in maintaining intervention effects or lack to document if effects are maintained past a one-year period. This paper describes the background, design and conceptual model of the FRIDOM (FRamed Intervention to Decrease Occupational Muscle pain) WHP program among health care workers. A job group characterized by having high physical work demands, musculoskeletal disorders, high sickness presenteeism - and absenteeism. FRIDOM aimed to reduce neck and shoulder pain. Secondary aims were to decrease sickness presenteeism, sickness absenteeism and lifestyle-diseases such as other musculoskeletal disorders as well as metabolic-, and cardiovascular disorders - and to maintain participation to regular physical exercise training, after a one year intervention period. The entire concept was tailored to a population of female health care workers. This was done through a multi-component intervention including 1) intelligent physical exercise training (IPET), dietary advice and weight loss (DAW) and cognitive behavioural training (CBT). The FRIDOM program has the potential to provide evidence-based knowledge of the pain reducing effect of a multi component WHP among a female group of employees with a high prevalence of musculoskeletal disorders and in a long term perspective evaluate the effects on sickness presenteeism and absenteeism as well as risk of life-style diseases. NCT02843269 , 06.27.2016 - retrospectively registered.

  8. Designing acoustics for linguistically diverse classrooms: Effects of background noise, reverberation and talker foreign accent on speech comprehension by native and non-native English-speaking listeners

    Science.gov (United States)

    Peng, Zhao Ellen

    The current classroom acoustics standard (ANSI S12.60-2010) recommends core learning spaces not to exceed background noise level (BNL) of 35 dBA and reverberation time (RT) of 0.6 second, based on speech intelligibility performance mainly by the native English-speaking population. Existing literature has not correlated these recommended values well with student learning outcomes. With a growing population of non-native English speakers in American classrooms, the special needs for perceiving degraded speech among non-native listeners, either due to realistic room acoustics or talker foreign accent, have not been addressed in the current standard. This research seeks to investigate the effects of BNL and RT on the comprehension of English speech from native English and native Mandarin Chinese talkers as perceived by native and non-native English listeners, and to provide acoustic design guidelines to supplement the existing standard. This dissertation presents two studies on the effects of RT and BNL on more realistic classroom learning experiences. How do native and non-native English-speaking listeners perform on speech comprehension tasks under adverse acoustic conditions, if the English speech is produced by talkers of native English (Study 1) versus native Mandarin Chinese (Study 2)? Speech comprehension materials were played back in a listening chamber to individual listeners: native and non-native English-speaking in Study 1; native English, native Mandarin Chinese, and other non-native English-speaking in Study 2. Each listener was screened for baseline English proficiency level, and completed dual tasks simultaneously involving speech comprehension and adaptive dot-tracing under 15 acoustic conditions, comprised of three BNL conditions (RC-30, 40, and 50) and five RT scenarios (0.4 to 1.2 seconds). The results show that BNL and RT negatively affect both objective performance and subjective perception of speech comprehension, more severely for non

  9. A theory evaluation of an induction programme

    Directory of Open Access Journals (Sweden)

    Kenrick Hendricks

    2012-07-01

    Full Text Available Orientation: An induction programme is commonly used to help new employees understand their job within the organisation. Research purpose: The main aim of this study was to examine whether or not the programme theory of an induction programme was plausible and would lead to the intended outcomes as described by the programme manager. Motivation for the study: Induction training is one of the most common training programmes in an organisation. However, there is little research to evaluate whether or not the activities of an induction programme will lead to the intended outcomes of such a programme. Research design, approach and method: This theory evaluation used a descriptive design. One hundred and thirteen employees of a media company completed a ten-item, five-point Likert scale which measured their perceptions of the programme’s outcome, identification with the organisation and intentions to stay with the organisation. Main findings: From this theory evaluation it was apparent that an induction programme based on an implausible programme theory could be problematic. An implausible programme theory affects the design of the programme activities and unsuitable activities may not deliver the desired outcomes. Practical/managerial implications: The intention of the evaluation is to guide human resource managers through a process of replacing an implausible programme theory with one that is plausible, and which ensures better alignment of programme activities and outcomes. Contribution/value-add: The evaluators showed how a plausible programme theory could improve programme design. This redesigned induction programme may lead to benefits, such as staff retention and company identification, rather than the vague assumption that it has been conforming to a legal obligation.

  10. Practical assessment of the SWMM programme

    Science.gov (United States)

    Hlustik, P.

    2017-10-01

    The article describes the advantages and disadvantages of the SWMM programme user environment when working with it. The Storm Water Management Model (SWMM) is a programme developed by the U.S. EPA (United States Environmental Protection Agency). The SWMM programme is used worldwide to plan, analyse and design rainfall-runoff, combined and separate sanitary sewage systems and other drainage systems in urban areas [1]. The programme is freely available to download from the U.S. EPA website [2].

  11. Burnable poisons in the light water reactor design, microburnup experiments and calculations. Part of a coordinated programme on burnup calculations and experiments for thermal reactors

    International Nuclear Information System (INIS)

    Penndorf, K.

    1976-04-01

    Investigations on Research Agreement N 1519/CF (1.8.1974 - 31.7.1975) entitled ''Burnable poisons in light water reactor design, microburnup experiments and calculations'' were carried out in the frame of the IAEA's coordinated research programme on ''Burn-up calculation and experiments for thermal reactors''. The theoretical and experimental work on application of solid burnable poison used for reduction of the amount of boric acid necessary to control of PWR or to lower the number of control rods needed in a BWR. Solid burnable poisons are needed in present PWR designs for the reduction of the boron acid concentration in order to prevent positive coefficients of reactivity. The special operational conditions of a ship reactor lead to the application of this kind of poison for compensation of almost all burnup reactivity. This strengthens the necessity of a very accurate and many dimensional calculations because an appropriate binding of reactivity has to be kept over the whole cycle time. Several burnup experiments had been run in the 15 MW material test reactor FRG-II. The following devices have been irradiated: poison pins within and without PWR fuel pin lattice segments and fuel pins containing pellets with a poison core. Measurements of reactivity, fluence, fission product concentration have been performed. Methods applied were γ-scanning and neutron pulse, radiography and transmission measurement techniques. Evaluation of the experiments was done by one and two dimensional Ssub(N) transport burnup calculations. In parallel a collision probability transport burnup code for current PWR design work is being developed, the main feature of which is economy in manpower and computer time

  12. The preventive effect of the bounding exercise programme on hamstring injuries in amateur soccer players: the design of a randomized controlled trial.

    Science.gov (United States)

    Van de Hoef, S; Huisstede, B M A; Brink, M S; de Vries, N; Goedhart, E A; Backx, F J G

    2017-08-22

    Hamstring injuries are the most common muscle injury in amateur and professional soccer. Most hamstring injuries occur in the late swing phase, when the hamstring undergoes a stretch-shortening cycle and the hamstring does a significant amount of eccentric work. The incidence of these injuries has not decreased despite there being effective injury prevention programmes focusing on improving eccentric hamstring strength. As this might be because of poor compliance, a more functional injury prevention exercise programme that focuses on the stretch-shortening cycle might facilitate compliance. In this study, a bounding exercise programme consisting of functional plyometric exercises is being evaluated. A cluster-randomized controlled trial (RCT). Male amateur soccer teams (players aged 18-45 years) have been randomly allocated to intervention and control groups. Both groups are continuing regular soccer training and the intervention group is additionally performing a 12-week bounding exercise programme (BEP), consisting of a gradual build up and maintenance programme for the entire soccer season. The primary outcome is hamstring injury incidence. Secondary outcome is compliance with the BEP during the soccer season and 3 months thereafter. Despite effective hamstring injury prevention programmes, the incidence of these injuries remains high in soccer. As poor compliance with these programmes may be an issue, a new plyometric exercise programme may encourage long-term compliance and is expected to enhance sprinting and jumping performance besides preventing hamstring injuries. NTR6129 . Retrospectively registered on 1 November 2016.

  13. Alternative education programmes and middle school dropout in Honduras

    Science.gov (United States)

    Marshall, Jeffery H.; Aguilar, Claudia R.; Alas, Mario; Castellanos, Renán Rápalo; Castro, Levi; Enamorado, Ramón; Fonseca, Esther

    2014-05-01

    Honduras has made steady progress in expanding post-primary school coverage in recent years, but many rural communities still do not provide a middle (lower secondary) school. As a result, Honduras has implemented a number of middle school alternative programmes designed to meet the needs of at-risk populations throughout the country. This article analyses dropout in three of the four main alternative lower secondary school programmes in Honduras over a three-year period for a cohort of roughly 5,500 students. The results show that these programmes are indeed reaching a vulnerable population in the country, but dropout rates are generally very high - upwards of 50 per cent in some cases - between Grades 7 and 9. Furthermore, even in the control school comparison samples made up of formal lower secondary schools, about 25 per cent of children leave school between Grades 7 and 9. The authors' analysis includes propensity score matching (PSM) methods that make more focused comparisons between students in alternative programmes and control samples. These results show that dropout rates in alternative programmes are not much different than in control schools, and only significant in one programme comparison, when taking into account family background characteristics like socioeconomic status (SES). Multivariate analysis within alternative programme samples finds that attrition is lower in those learning centres which have adopted key features of formal schools, such as university-educated teachers. The results highlight the tremendous variation in the alternative middle school sector in terms of programme features, school quality and student outcomes, as well as the challenges of expanding this sector to meet the growing demand for lower secondary schooling in Honduras.

  14. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1984-10-01

    The KfK-Association has continued work on 17 R and D contracts of the Fusion Technology Programme. An effort of 94 manyears per year is at present contributed by 10 KfK departments, covering all aereas defined in the Fusion Technology Programme. The dominant part of the work is directed towards the need of the NET design or supporting experiments. Some additional effort addresses long term technological issues and system studies relevant to DEMO or confinement schemes alternative to tokamaks. Direct contribution to the NET team has increased by augmentation of NET study contracts and delegation of personnel, three KfK delegates being at present members of the NET team. In reverse, specifications and design guidelines worked out by NET have started to have an impact on the current R and D-work in the laboratory. (orig./GG)

  15. Research and training programmes

    Directory of Open Access Journals (Sweden)

    Daksha Patel

    2007-03-01

    Full Text Available Research is defined in the Oxford English Dictionary as “a systematic investigation and study of materials and sources in order to establish facts and reach new conclusions.”Research is embedded in the curricula of most postgraduate training programmes; students are expected to complete some form of original work towards a dissertation. This often evokes a range of reactions: “What is the purpose of this exercise? Why do I have to do research when I just want to do a job? Shouldn’t research rather be left to experts? I can’t do the course; I have no research background!”

  16. Co-Creating theories and research design for an interdisciplinary project dealing with capacity building for people with migration background in Austria

    Science.gov (United States)

    Weber, Karin; Tscharner, Susanna; Stickler, Therese; Fuchs, Britta; Damyanovic, Doris; Hübl, Johannes

    2017-04-01

    Understanding spatial and social aspects of vulnerability is of growing importance in the context of climate change and natural hazards. The interplay of structural factors, socio-demographic aspects, current risk communication strategies, spatial planning instruments and related processes and the current spatial and environmental situation, including hazards and hazard zones, geographical locations, building and settlement types, contributing to people`s vulnerabilities needs to be analysed and understood to reduce vulnerability and to foster resilience. The project "CCCapMig" (Climate change and capacity building for people with migration background in Austria) aims at linking spatial and technical, as well as organisational and social aspects of climate change and natural hazards. This paper focuses on the co-creation of the theoretical framework and concepts and outlines the research design for this interdisciplinary cross-analysis of several case studies in rural Austria. The project is designed as an inter- and transdisciplinary survey and brings together engineering sciences, spatial sciences and social sciences. Reflecting the interdisciplinary approach, a theoretical framework was developed that refers to a combination of both theories and frameworks from vulnerability research, theories of risk perception and spatial theories and methods like the Sustainable Livelihoods Framework, the Protection-Motivation Theory and Landscape-Planning Theories: The "Sustainable Livelihoods Framework" adapted (by FA0) for disaster risk management offers an analytical framework to understand the emergence of vulnerabilities from the perspective of people`s livelihoods on individual and community level. It includes human, social, natural, physical and financial aspects and the role of institutions, policies and legal rights in reducing or increasing exposure to disaster risk and coping capacities. Additionally, theories on risk perception, especially Protection

  17. Course Programme

    DEFF Research Database (Denmark)

    Tvedebrink, Tenna Doktor Olsen

    2015-01-01

    Welcome to your first DESIGN course: ‘Mapping Meals and their Spaces’. I hope you are ready to learn about the emerging discipline of Food Design and the so‐called “Design Thinking” perspective, as well as how to implement the interdisciplinary knowledge characterizing your new education Integrated...

  18. The Alberta population-based prospective evaluation of the quality of life outcomes and economic impact of bariatric surgery (APPLES study: background, design and rationale

    Directory of Open Access Journals (Sweden)

    McCargar Linda

    2010-10-01

    Full Text Available Abstract Background Extreme obesity affects nearly 8% of Canadians, and is debilitating, costly and ultimately lethal. Bariatric surgery is currently the most effective treatment available; is associated with reductions in morbidity/mortality, improvements in quality of life; and appears cost-effective. However, current demand for surgery in Canada outstrips capacity by at least 1000-fold, causing exponential increases in already protracted, multi-year wait-times. The objectives and hypotheses of this study were as follows: 1. To serially assess the clinical, economic and humanistic outcomes in patients wait-listed for bariatric care over a 2-year period. We hypothesize deterioration in these outcomes over time; 2. To determine the clinical effectiveness and changes in quality of life associated with modern bariatric procedures compared with medically treated and wait-listed controls over 2 years. We hypothesize that surgery will markedly reduce weight, decrease the need for unplanned medical care, and increase quality of life; 3. To conduct a 3-year (1 year retrospective and 2 year prospective economic assessment of bariatric surgery compared to medical and wait-listed controls from the societal, public payor, and health-care payor perspectives. We hypothesize that lower indirect, out of pocket and productivity costs will offset increased direct health-care costs resulting in lower total costs for bariatric surgery. Methods/design Population-based prospective cohort study of 500 consecutive, consenting adults, including 150 surgically treated patients, 200 medically treated patients and 150 wait-listed patients. Subjects will be enrolled from the Edmonton Weight Wise Regional Obesity Program (Edmonton, Alberta, Canada, with prospective bi-annual follow-up for 2 years. Mixed methods data collection, linking primary data to provincial administrative databases will be employed. Major outcomes include generic, obesity-specific and preference

  19. ISOLDE PROGRAMME

    CERN Multimedia

    Fedosseev, V; Herfurth, F; Scheidenberger, C; Geppert, C; Gorges, C; Ratajczyk, T; Wiederhold, J C; Vogel, S; Munch, M K; Nieminen, P; Pakarinen, J J A; Lecesne, N; Bouzomita, H; Grinyer, J; Marques moreno, F M; Parlog, M; Blank, B A; Pedroza, J; Ghetta, V; Lozeva, R; Zacarias, S M; Guillemaud mueller, D S; Cottereau, E; Cheikh mhamed, M; Tusseau nenez, S; Tungate, G; Walker, P M; Smith, A G; Fitzpatrick, C; Dominik, W M; Karny, M; Ciemny, A A; Nyman, G H; Thies, R M A; Lindberg, S K G; Langouche, G F; Velten, P; Araujo escalona, V I; Boudreau, M; Domnanich, K A; Richter, D; Lutter, R J; Javaji, A; Engel, R Y; Wiehr, S; Nacher gonzalez, E; Jungclaus, A; Ribeiro jimenez, G; Marroquin alonso, I; Cal gonzalez, J; Paziy, V; Salsac, M; Murphy, C; Podolyak, Z F; Bajoga, A D; Butler, P; Pritchard, A; Colosimo, S J; Steer, A N; Fox, S P; Wadsworth, B A; Truesdale, V L; Al monthery, M; Bracco, A; Guttormsen, M S; Badea, M N; Calinescu, S; Ujeniuc, S; Cederkall, J A; Zemlyanoy, S; Donets, E D; Golovkov, M; Schweitzer, D K; Vranicar, A; Harrichunder, S; Ncube, M; Nannini, A; Strisovska, J; Wolf, E; Gerten, R F; Lehnert, J; Rainovski, G I; Pospisil, S; Datta pramanik, U; Benzoni, G; Fedorov, D; Maier, F M; Bonanni, A; Pfeiffer, B; Griesel, T; Wehner, L W; Mikkelsen, M; Recchia, F; Lenzi, S M; Smith, J F; Kelly, C M; Acosta sanchez, L A; Chavez lomeli, E R; De melo bandeira tavares, P M; Vieira, J M; Martins da silva, M A; Lima lopes, A M; Lopes leal, T J; Mader, J; Kessler, P; Laurent, B G; Schweikhard, L C; Marx, G H; Kulczycka, E; Komorowska, M; Da silva, M F; Goncalves marques, C P; Baptista peres, M A; Welander, J E; Reiter, P; Miller, C; Martin sanchez-cano, D; Wiens, A; Blazhev, A A; Braun, N; Cappellazzo, M V; Birkenbach, B; Gerst, R; Dannhoff, M F; Sithole, M J; Bilgier, B; Nardelli, S; Araujo mendes, C M; Agramunt ros, J; Valencia marin, E; Pantea, E; Hessberger, F P; Leduc, A J; Mitsuoka, S; Carbonari, A W; Buchegger, F J; Garzon camacho, A; Dapo, H; Papka, P; Stachura, M K; Stora, T; Marsh, B A; Thiboud, J A; Heylen, H; Antalic, S; Stahl, C; Bauer, C; Thurauf, M; Maass, B; Sturm, S; Boehm, C; Wolf, N R; Ways, M; Steinsberger, T P; Riisager, K; Ruotsalainen, P A; Bastin, B; Duval, F T; Penessot, G; Flechard, X D; Desrues, P; Giovinazzo, J; Kurtukian nieto, T; Ascher, P E L; Roccia, S; Matea, I; Croizet, H A G; Bonnin, C M; Morfouace, P; Smith, A J; Guin, R; Banerjee, D; Gunnlaugsson, H P; Ohtsubo, T; Zhukov, M V; Tengborn, E A; Welker, A; Giannopoulos, E; Dessagne, P; Juscamaita vivanco, Y; Da costa pereira, L M; Hustings, J; Yu, H; Kruecken, R; Nowak, A K; Jankowski, M; Cano ott, D; Galve lahoz, P; Murphy, A S J; Shand, C M; Jones, G D; Herzberg, R; Ikin, P; Revill, J P; Everett, C; Napoli, D R; Scarel, G; Larsen, A; Tornyi, T G; Pascu, S G; Stroe, L; Toma, S; Jansson, K; Dronjak fahlander, M; Krupko, S; Hurst, A M; Veskovic, M; Nikolov, J; Masenda, H; Sibanda, W N; Rocchini, M; Klimo, J; Deicher, M; Wichert, T; Kronenberg, J; Helmke, A; Meliani, Z; Ivanov, V S; Green, B L; Keatings, J M; Kuti, I; Halasz, Z; Henry, M O; Bras de sequeira amaral, V; Espirito santo, F; Da silva, D J; Rosendahl, S; Vianden, R J; Speidel, K; Agarwal, I; Faul, T; Kownacki, J M; Martins correia, J G; Lorenz, K; Costa miranda, S M; Granadeiro costa, A R; Zyabkin, D; Kotthaus, T; Pfeiffer, M; Gironi, L; Jensen, A; Romstedt, F; Constantino silva furtado, I; Heredia cardona, J A; Jordan martin, M D; Montaner piza, A; Zacate, M O; Plewinski, F; Mesli, A; Akakpo, E H; Pichard, A; Hergemoller, F; Neu, W; Fallis starhunter, J P; Voulot, D; Mrazek, J; Ugryumov, V; Savreux, R P; Kojouharov, I M; Kern, R O; Papst, O; Fitting, J; Lauer, M; Kirsebom, O S; Jensen, K L; Jokinen, A; Rahkila, P J; Hager, U D K; Konki, J P; Dubois, M; Orr, N A; Fabian, X; Huikari, J E; Goigoux, T; Magron, C; Zakari, A A; Maietta, M; Bachelet, C E M; Roussiere, B; Li, R; Canavan, R L; Lorfing, C; Foster, R M; Gislason, H P; Shayestehaminzadeh, S; Qi, B; Mukai, M; Watanabe, Y; Willmann, L; Kurcewicz, W; Wimmer, K; Meisel, Z P; Dorvaux, O; Nowacki, F; Koudriavtsev, I; Lievens, P; Delaure, B J P; Neyens, G; Ceruti, S; Bunka, M; Vermeulen, C; Umbricht, C A; De boer, J; Podadera aliseda, I; Alcorta moreno, M; Pesudo fortes, V; Zielinska, M; Korten, W; Wang, C H; Lotay, G J; Mason, P; Rice, S J; Regan, P H; Willenegger, L M; Andreev, A; Yavuzkanat, N; Hass, M; Kumar, V; Valiente dobon, J J; Crespo campo, L; Zamfir, N - V; Deleanu, D; Clisu, C; Jeppesen, H B; Wu, C; Pain, S D; Stracener, D W; Wuosmaa, A H; Szilner, S; Colovic, P; Matousek, V; Venhart, M; Birova, M; Li, X; Stuchbery, A E; Lellep, G M; Chakraborty, S; Leoni, S; Chupp, T; Yilmaz, C; Severin, G; Garcia ramos, J E; Newton, M E; Hadinia, B; Mc glynn, E; Monteiro de sena silvares de carvalho, I; Friedag, P; Figuera, P; Koos, V; Meot, V H; Pauwels, D B; Jancso, A; Srebrny, J; Alves, E J; David bosne, E; Bengtsson, L; Kalkuehler, M; Albers, M; Bharuth-ram, K; Akkus, B; Hemmingsen, L B S; Pedersen, J T; Dos santos redondo, L M; Rubio barroso, B; Algora, A; Kozlov, V; Mavela, D L; Mokhles gerami, A; Keeley, N; Bernardo da silva, E; Unzueta solozabal, I; Schell, J; Szybowicz, M; Yang, X; Plavec, J; Lassen, J; Johnston, K; Coquard, L; Bloch, T P; Bonig, E S; Stegmann, R; Ignatov, A; Paschalis, S; Fernandez martinez, G; Schilling, M; Habermann, T; Von hahn, R; Minaya ramirez, E E; Moore, I D; Wang, Y; Saastamoinen, A J; Grahn, T; Herzan, A; Stolze, S M; Clement, E; Dijon, A; Shornikov, A; Lienard, E; Gibelin, J D; Pain, C; Canchel, G; Simpson, G S; Latrasse, L P; Huang, W; Forest, D H; Billowes, J; Flanagan, K; Strashnov, I; Binnersley, C L; Sanchez poncela, M; Simpson, J; Morrall, P S; Grant, A F; Charisopoulos, S; Lagogiannis, A; Bhattacharya, C; Olafsson, S; Stepaniuk, M; Tornqvist, H T; Heinz, A M; White iv, E R; Courtin, S; Marechal, F; Da silva fenta, A E; De lemos lima, T A; Stryjczyk, M; Dockx, K; Haller, S; Rizzi, M; Reichert, S B; Bonn, J; Thirolf, P G; Garcia rios, A R; Gugliermina, V M; Cubero campos, M A; Sanchez tembleque, V; Benito garcia, J; Senoville, M; Mountford, D J; Gelletly, W; Alharbi, T S T; Wilson, E; Rigby, S V; Andreoiu, C; Paul, E S; Harkness, L J; Judson, D S; Wraith, C; Van esbroeck, K; Wadsworth, R; Cubiss, J G; Harding, R D; Vaintraub, S; Mandal, S K; Scarpa, D; Hoff, P; Syed naeemul, H; Borcea, R; Balabanski, D L; Marginean, R; Rotaru, F; Rudolph, D; Fahlander, C H; Chudoba, V; Kay, B P; Soic, N; Naidoo, D; Veselsky, M; Kliman, J; Raisanen, J A; Dietrich, M; Maung maung than, M M T; Reed, M W; Danchev, M T; Ray, J; Roy, M; Hammen, M; Capponi, L; Veghne csatlos, M M; Fryar, J; Mirzadeh vaghefi, S P; Trindade pereira, A M; De pinho oliveira, G N; Bakenecker, A; Tramm, C; Germic, V; Morel, P A; Kowalczyk, M; Matejska-minda, M; Wolinska-cichocka, M; Ringvall moberg, A; Mantovan, R; Fransen, C H; Radeck, F; Schneiders, D W; Steinbach, T; Vibenholt, J E; Magnussen, M J; Stevnhoved, H M; Comas lijachev, V; Dasenbrock-gammon, N M; Perkowski, J; O'neill, G G; Matveev, Y; Wegner, M; Liu, Z; Perez alvarez, T; Cerato, L; Radchenko, V; Molholt, T E; Tabares giraldo, J A; Srnka, D; Dlouhy, Z; Beck, D; Werner, V R; Homm, I; Eliseev, S; Blaum, K; Probst, M B; Kaiser, C J; Martin, J A; Refsgaard, J; Peura, P J; Greenlees, P T; Auranen, K; Delahaye, P; Traykov, E K; Perez loureiro, D; Mery, A A; Couratin, C; Tsekhanovich, I; Lunney, D; Gaulard, C V; Mottram, A D; Cullen, D M; Das, S K; Van de walle, J; Mazzocchi, C; Jonson, B N G; Woehr, A; Lesher, S R; Zuber, K T; Filippin, L; De witte, H J; Van den bergh, P A M; Raabe, R; Dirkx, D; Parnefjord gustafsson, F O A; Dunlop, R A; Tarasava, K; Gernhaeuser, R A; Weinzierl, W; Berger, C; Wendt, K; Achtzehn, T; Gottwald, T; Schug, M; Rossel, R E; Dominguez reyes, R R; Fraile prieto, L M; Briz monago, J A; Koester, U H; Bunce, M R; Bowry, M D; Nakhostin, M; Shearman, R; Cresswell, J R; Joss, D T; Gredley, A; Groombridge, D; Laird, A M; Aslanoglou, X; Siem, S; Weterings, J A; Renstrom, T; Szpak, B T; Luczkowski, M J; Ghita, D; Bezbakh, A; Soltz, R A; Bollmann, J; Bhattacharya, P; Roy, S; Rahaman, M A; Wlodarski, T; Carvalho soares, J; Barzakh, A; Schertz, F; Froemmgen, N E; Liberati, V; Foy, B E; Baptista barbosa, M; Weinheimer, C P; Zboril, M; Simon, R E; Popescu, L A; Czosnyka, T; Miranda jana, P A; Leimbach, D; Naskrecki, R; Plociennik, W A; Ruchowska, E E; Chiara, C J; Walters, W; Eberth, J H; Thomas, T; Thole, P; Queiser, M T; Lo bianco, G; D'amico, F; Muller, S; Sanchez alarcon, R M; Tain enriquez, J L; Orrigo, S E A; Orlandi, R; Masango, S; Plazaola muguruza, F C; Lepareur, N G; Fiebig, J M; Ceylan, N; Wildner, E; Kowalska, M; Malbrunot, S; Garcia ruiz, R F; Pallada, S; Slezak, M; Roeckl, E; Schrieder, G H; Ilieva, S K; Koenig, K L; Amoretti, M A; Lommen, J M; Fynbo, H O U; Weyer, G O P; Koldste, G T; Madsboll, K; Jensen, J H; Nieminen, A M; Reponen, M; Villari, A; Thomas, J; Saint-laurent, M; Sorlin, O H; Carniol, B; Pereira lopez, J; Grevy, S; Plaisir, C; Marie-jeanne, M J; Georgiev, G P; Etile, A M; Le blanc, F M; Verney, D; Stefan, G I; Assie, M; Suzuki, D; Guillot, J; Vazquez rodriguez, L; Campbell, P; Deacon, A N; Ware, T; Flueras, A; Xie, L; Banerjee, K; Piersa, M; Galaviz redondo, D; Johansson, H T; Schwarz, S; Toysa, A S; Aumont, J; Van duppen, P L E; Atanasov, D; Zadvornaya, A; Renaud, M A; Xu, Z; Garrett, P E; Rapisarda, E; Reber, J A; Mattolat, C F; Raeder, S; Habs, D; Vidal, M; Perez liva, M; Calvo portela, P; Ulla pedrera, F J; Wood, R T; Lalkovski, S; Page, R; Petri, M; Barton, C J; Nichols, A J; Vermeulen, M J; Bloor, D M; Henderson, J; Wilson, G L; De angelis, G; Buerger, A; Modamio hoybjor, V; Klintefjord, M L; Ingeberg, V W; Fornal, B A; Marginean, R; Sava, T; Kusoglu, A; Suvaila, R; Lica, R; Costache, C; Mihai, R; Ionescu, A; Baeck, T M; Hoffman, C R; Sedlak, M; Koskelo, O K; Kyaw myat, K M; Gladnishki, K A; Ganguly, B; Goncalves marques, J; Cardoso, S; Seliverstov, M; Niessen, B D; Gutt, L E; Chapman, R; Spagnoletti, P N; Lopes, C; De oliveira amorim, C; Batista lopes, C M; Araujo, J; Schielke, S J; Daugas, J R; Gaudefroy, L; Chevrier, R; Szunyogh, D M; Napiorkowski, P J; Wrzosek-lipska, K; Wahl, U; Catarino, N; Pereira carvalho alves de sequeira, M; Hess, H E; Holler, A; Bettermann, L; Geibel, K; Taprogge, J; Lewandowski, L T N; Manchado de sola, F; Cakirli mutlu, R B; Das gupta, S; Thulstrup, P W; Heinz, U; Nogwanya, T; Neidherr, D M; Morales lopez, A I; Gumenyuk, O; Peaker, A R; Wakabayashi, Y; Abrahams, K J; Martin montes, E J; Mach, H A; Souza ribeiro junior, I; He, J; Chalil, A; Xing, R; Dos santos augusto, R M; Giles, T J; Dorsival, A; Trujillo hernandez, J S; Kalaninova, Z; Andel, B; Venos, D; Kraemer, J; Saha, S; Neugart, R; Eronen, T O; Kreim, K D; Heck, M K; Goncharov, M; Karthein, J; Julin, R J; Eleon, C; Achouri, N L; Grinyer, G F; Fontbonne, C M; Alfaurt, P; Lynch, K M; Wilkins, S G; Brown, A R; Imai, N; Pomorski, M J; Janiak, L; Nilsson, T; Stroke, H H; Stanja, J; Dangelser, E; Heenen, P; Godefroid, M; Mallion, S N; Gins, W A M; Stegemann, S T; Koszorus, A; Mcnulty, J F; Lin, P; Ohlert, C M; Schwerdtfeger, W; Tengblad, O; Becerril reyes, A D; Perea martinez, A; Martinez perez, M C; Margerin, V; Rudigier, M; Alexander, T D; Patel, Z V; Hammond, N; Wearing, F; Patel, A; Jenkins, D G; Corradi, L; Galtarossa, F; Debernardi, A; Giacoppo, F; Tveten, G M; Malatji, K L; Krolas, W A; Stanoiu, M A; Rickert, E U; Ter-akopian, G; Cline, D; Riihimaeki, I A; Simon, K D; Wagner, F E; Turker, M; Neef, M H; Coombes, B J; Jakubek, J; Vagena, E; Bottoni, S; Nishimura, K; Correia, J; Rodrigues valdrez, C J; Molkanov, P; Adhikari, R; Ostrowski, A N; Hallmann, O; Scheck, M; Wady, P T; Lane, J; Krasznahorkay, A J; Kunne sohler, D; Meaney, A J; Hochschulz, F; Roig, O; Behan, C C; Kargoll, S; Kemnitz, S; Carvalho teixeira, R C; Redondo cubero, A; Tallarida, G; Kaczarowski, R; Finke, F; Linnemann, A; Altenkirch, R; Saed-samii, N; Ansari, S H; Dlamini, W B; Adoons, V N; Ronning, C R; Wiedeking, M; Herlert, A J; Mehl, C V; Judge, S M; Gaertner, D; Divinskyi, S; Karabasov, M O; Zagoraios, G; Boztosun, I; Van zyl, J J; Catherall, R; Lettry, J; Wenander, F J C; Zakoucky, D; Catchen, G L; Noertershaeuser, W; Kroell, T; Leske, J; Shubina, D; Murray, I M; Pancin, J; Delaunay, F; Poincheval, J J L; Audirac, L L; Gerbaux, M T; Aouadi, M; Sole, P G P; Fallot, M P; Onillon, A; Duchemin, C; Formento cavaier, R; Audi, G; Boukhari, A; Lau, C; Martin, J A; Barre, N H; Berry, T A; Procter, T J; Bladen, L K; Axiotis, M; Muto, S; Jeong, S C; Hirayama, Y; Korgul, A B; Minamisono, K; Bingham, C R; Aprahamian, A; Bucher, B M; Severijns, N; Huyse, M L; Ferrer garcia, R; Verlinde, M N S; Romano, N; Maugeri, E A; Klupp, S C; Dehn, M H; Heinke, R M; Naubereit, P; Maira vidal, A; Vedia fernandez, M V; Ibanez garcia, P B; Bruyneel, B J E; Materna, T; Hadynska-klek, K; Al-dahan, N; Alazemi, N; Carroll, R J; Babcock, C; Patronis, N; Eleme, Z; Dhal, A; Sahin, E; Goergen, A; Maj, A; Bednarczyk, P A; Borcea, C; Negoita, F; Suliman, G; Marginean, N M; Sotty, C O; Negret, A L; Nae, S A; Nita, C; Golubev, P I; Knyazev, A; Jost, C U; Petrik, K; Vaeyrynen, S A; Dracoulis, G D; Uher, J; Fernandez dominguez, B; Chakraborty, P; Avigo, R; Falahat, S; Lekovic, F; Dorrer, H J; Mengoni, D; Derkx, X; Angus, L J; Sandhu, K S; Gregor, E; Kelly, N A; Byrne, D J; Haas, H; Lourenco, A A; Sousa pereira, S M; Sousa, J B; De melo mendonca, T M; Tavares de sousa, C; Guerreiro dos santos oliveira custodio, L M; Da rocha rodrigues, P M; Yamaguchi, T; Thompson, P C; Rosenbusch, M; Wienholtz, F; Fischer, P; Iwanicki, J S; Rusek, K M; Hanstorp, D; Vetter, U; Wolak, J M; Park, S H; Warr, N V; Doornenbal, P C; Imig, A; Seidlitz, M; Moschner, K; Vogt, A; Kaya, L; Martel bravo, I; Orduz, A K; Serot, O; Majola, S N; Litvinov, Y; Bommert, M; Hensel, S; Markevich, V; Nishio, K; Ota, S; Matos, I; Zenkevich, A; Picado sandi, E; Forstner, O; Hu, B; Ntshangase, S S; Sanchez-segovia, J

    2002-01-01

    The experiments aim at a broad exploration of the properties of atomic nuclei far away from the region of beta stability. Furthermore, the unique radioactive beams of over 60~elements produced at the on-line isotope separators ISOLDE-2 and ISOLDE-3 are used in a wide programme of atomic, solid state and surface physics. Around 300 scientists are involved in the project, coming from about 70 laboratories. \\\\ \\\\ The electromagnetic isotope separators are connected on-line with their production targets in the extracted 600 MeV proton or 910~MeV Helium-3 beam of the Synchro-Cyclotron. Secondary beams of radioactive isotopes are available at the facility in intensities of 10$^1

  20. A Statistical Programme Assignment Model

    DEFF Research Database (Denmark)

    Rosholm, Michael; Staghøj, Jonas; Svarer, Michael

    When treatment effects of active labour market programmes are heterogeneous in an observable way  across the population, the allocation of the unemployed into different programmes becomes a particularly  important issue. In this paper, we present a statistical model designed to improve the present...... duration of unemployment spells may result if a statistical programme assignment model is introduced. We discuss several issues regarding the  plementation of such a system, especially the interplay between the statistical model and  case workers....

  1. NASCAP programmer's reference manual

    Science.gov (United States)

    Mandell, M. J.; Stannard, P. R.; Katz, I.

    1993-05-01

    The NASA Charging Analyzer Program (NASCAP) is a computer program designed to model the electrostatic charging of complicated three-dimensional objects, both in a test tank and at geosynchronous altitudes. This document is a programmer's reference manual and user's guide. It is designed as a reference to experienced users of the code, as well as an introduction to its use for beginners. All of the many capabilities of NASCAP are covered in detail, together with examples of their use. These include the definition of objects, plasma environments, potential calculations, particle emission and detection simulations, and charging analysis.

  2. Durability 2007. Injection grout investigations. Background description

    International Nuclear Information System (INIS)

    Orantie, K.; Kuosa, H.

    2008-12-01

    The aim of this project was to evaluate the durability risks of injection grouts. The investigations were done with respect to the application conditions, materials and service life requirements at the ONKALO underground research facility. The study encompassed injection grout mixtures made of ultrafine cement with and without silica fume. Some of the mixtures hade a low pH and thus a high silica fume content. The project includes a background description on durability literature, laboratory testing programme, detailed analysis of results and recommendations for selecting of ideal grout mixtures. The background description was made for the experimental study of low-pH and reference rock injection grouts as regards pore- and microstructure, strength, shrinkage/swelling and thus versatile durability properties. A summary of test methods is presented as well as examples, i.e. literature information or former test results, of expected range of results from the tests. Also background information about how the test results correlate to other material properties and mix designs is presented. Besides the report provides basic information on the pore structure of cement based materials. Also the correlation between the pore structure of cement based materials and permeability is shortly discussed. The test methods included in the background description are compressive strength, measurement of bulk drying, autogenous and chemical shrinkage and swelling, hydraulic conductivity / permeability, capillary water uptake test, mercury intrusion porosimetry (MIP) and thin section analysis. Three main mixtures with water-binder ratio of 0.8, 1.0 and 1.4 and silica fume content of 0, 15 and 40% were studied in the laboratory. Besides two extra mixtures were studied to provide additional information about the effect of varying water-dry-material ratio and silica fume content on durability. The evaluation of water tightness based on water permeability coefficient and micro cracking was

  3. Programmable electronic safety systems

    International Nuclear Information System (INIS)

    Parry, R.R.

    1993-01-01

    Traditionally safety systems intended for protecting personnel from electrical and radiation hazards at particle accelerator laboratories have made extensive use of electromechanical relays. These systems have the advantage of high reliability and allow the designer to easily implement fail-safe circuits. Relay based systems are also typically simple to design, implement, and test. As systems, such as those presently under development at the Superconducting Super Collider Laboratory (SSCL), increase in size, and the number of monitored points escalates, relay based systems become cumbersome and inadequate. The move toward Programmable Electronic Safety Systems is becoming more widespread and accepted. In developing these systems there are numerous precautions the designer must be concerned with. Designing fail-safe electronic systems with predictable failure states is difficult at best. Redundancy and self-testing are prime examples of features that should be implemented to circumvent and/or detect failures. Programmable systems also require software which is yet another point of failure and a matter of great concern. Therefore the designer must be concerned with both hardware and software failures and build in the means to assure safe operation or shutdown during failures. This paper describes features that should be considered in developing safety systems and describes a system recently installed at the Accelerator Systems String Test (ASST) facility of the SSCL

  4. Programmable Electronic Safety Systems

    International Nuclear Information System (INIS)

    Parry, R.

    1993-05-01

    Traditionally safety systems intended for protecting personnel from electrical and radiation hazards at particle accelerator laboratories have made extensive use of electromechanical relays. These systems have the advantage of high reliability and allow the designer to easily implement failsafe circuits. Relay based systems are also typically simple to design, implement, and test. As systems, such as those presently under development at the Superconducting Super Collider Laboratory (SSCL), increase in size, and the number of monitored points escalates, relay based systems become cumbersome and inadequate. The move toward Programmable Electronic Safety Systems is becoming more widespread and accepted. In developing these systems there are numerous precautions the designer must be concerned with. Designing fail-safe electronic systems with predictable failure states is difficult at best. Redundancy and self-testing are prime examples of features that should be implemented to circumvent and/or detect failures. Programmable systems also require software which is yet another point of failure and a matter of great concern. Therefore the designer must be concerned with both hardware and software failures and build in the means to assure safe operation or shutdown during failures. This paper describes features that should be considered in developing safety systems and describes a system recently installed at the Accelerator Systems String Test (ASST) facility of the SSCL

  5. The TELEMAN programme

    International Nuclear Information System (INIS)

    Nordwall, H.J. de

    1990-01-01

    The TELEMAN programme is a five year cost-shared research programme covering remote handling in hazardous and disordered nuclear environments. TELEMAN's objective is to strengthen the scientific and engineering bases upon which the design of teleoperators for use throughout the nuclear industry rests. This will be done by providing new solutions to problems of manipulation, material transport and mobile surveillance in nuclear environments and by demonstrating their feasibility. The Commission's motivations lie in the potential teleoperators have to improve the separation of workers from radioactive equipment. The same technology will also enable plant operators and public authorities to deal more effectively with nuclear accidents. Finally, gains in productivity, particularly in the repair and maintenance area can be expected. Community support is justified by the cost of the reliability and autonomy required for the nuclear teleoperator, the need to rationalise R and D investment in an area of increasing industrial potential and a common interest in coherent responses to emergencies. (author)

  6. A programmable artificial retina

    International Nuclear Information System (INIS)

    Bernard, T.M.; Zavidovique, B.Y.; Devos, F.J.

    1993-01-01

    An artificial retina is a device that intimately associates an imager with processing facilities on a monolithic circuit. Yet, except for simple environments and applications, analog hardware will not suffice to process and compact the raw image flow from the photosensitive array. To solve this output problem, an on-chip array of bare Boolean processors with halftoning facilities might be used, providing versatility from programmability. By setting the pixel memory size to 3 b, the authors have demonstrated both the technological practicality and the computational efficiency of this programmable Boolean retina concept. Using semi-static shifting structures together with some interaction circuitry, a minimal retina Boolean processor can be built with less than 30 transistors and controlled by as few as 6 global clock signals. The successful design, integration, and test of such a 65x76 Boolean retina on a 50-mm 2 CMOS 2-μm circuit are presented

  7. Preliminary test Results for a 25K Sorption Cryocooler Designed for the UCSB Long Duration Balloon Cosmic Microwave Background Radiation Experiment

    Science.gov (United States)

    Wade, L. A.; Levy, A. R.

    1996-01-01

    A continuous operation, vibration-free, long-life 25K sorption cryocooler has been built and is now in final integration and performance testing. This cooler wil be flown on the University of California at Santa Barbara (UCSB) Long Duration Balloon (LDB) Cosmic Microwave Background Radiation Experiment.

  8. The MERLIN programme: Pt. 1

    International Nuclear Information System (INIS)

    Worswick, D.; Hindle, E.D.; Stacey, R.D.; Stevens, M.; Wickett, A.J.; GArlick, A.

    1989-08-01

    The MERLIN rig at the Northern Research Laboratories, Springfields, was intended to investigate the deformation behaviour of Zircaloy fuel rod cladding under conditions approximating those of a large break Loss of Coolant Accident (LOCA). In this rig, an assembly of electrically heated fuel rod simulators (6x6 cluster) was subjected to a temperature transient simulating that predicted to occur in a LOCA, including the initiation of bottom reflooding at a suitable stage. The main aim of the MERLIN programme was to investigate the extent of sub-channel blockage produced during clad deformation under conditions of high mechanical restraint, in two phase cooling conditions. The programme was to consist of four test bundles, the final two of which would be used for ballooning experiments in which high sub-channel blockage would be produced by a suitable choice of test conditions. A major part of the programme was to provide validation data for reactor accident codes used in the CEGB clad ballooning safety case for Sizewell B. This report, one of a series which describes the programme in detail, is an overview of the MERLIN programme. It provides background, summarises those reports which discuss the programme in detail and draws attention to those areas where useful information has been obtained. (author)

  9. Background subtraction theory and practice

    CERN Document Server

    Elgammal, Ahmed

    2014-01-01

    Background subtraction is a widely used concept for detection of moving objects in videos. In the last two decades there has been a lot of development in designing algorithms for background subtraction, as well as wide use of these algorithms in various important applications, such as visual surveillance, sports video analysis, motion capture, etc. Various statistical approaches have been proposed to model scene backgrounds. The concept of background subtraction also has been extended to detect objects from videos captured from moving cameras. This book reviews the concept and practice of back

  10. Perceptions of medical students and their mentors in a specialised programme designed to provide insight into non-traditional career paths

    Science.gov (United States)

    Josephson, Anna; Stenfors-Hayes, Terese

    2011-01-01

    Objectives This pilot study explores the perceptions of medical students and their individual mentors who advised them in a specialised programme where students gained insight into non-tradition career paths. Methods Twelve medical students in years 3-6 at Karolinska Institutet, Sweden were recruited to the Prominentia mentor programme where they were individually paired with mentors who met with them to discuss and advise them on non-traditional career paths. Application letters of students to join the programme as well as electronically distributed questionnaires and semi-structured interviews were used to assess the perceptions of mentors and students to the programme. Both the questionnaire and the interview transcripts were thematised using content analysis. Results In terms of expectations and requests, the application letters showed that all students specified their career goals and the type of mentor they desired. Whereas mentors in general had fewer requests and some had no specific demands. In light of perceived effects, all mentors felt they discussed future careers with their students and the majority of students responded the same way, with some interesting deviations. Most discussed topics during meetings were: future career, medical education, combinations of private life and work, and work environment. Conclusions This pilot study revealed that students appreciated receiving inspiration and seeing career path opportunities outside academic medicine as well as receiving support in personal and professional development and guidance about the students’ role as a doctor. However, discrepancies were found regarding how mentors and students respectively perceived the mentor programme.

  11. What do community health workers have to say about their work, and how can this inform improved programme design? A case study with CHWs within Kenya.

    Science.gov (United States)

    Oliver, Martin; Geniets, Anne; Winters, Niall; Rega, Isabella; Mbae, Simon M

    2015-01-01

    material elements: leaky tins and dishracks evidenced successful health interventions, whilst bicycles, empty first aid kits and recruiting stretcher bearers evidenced the difficulties of resourcing and geography they are required to overcome. The way that these CHWs described their work was as healthcare generalists, working to serve their community and to integrate it with the official health system. Their work involves referrals, monitoring, reporting and educational interactions. Whilst they face problems with resources and training, their accounts show that they respond to this in creative ways, working within established systems of community power and formal authority to achieve their goals, rather than falling into a 'deficit' position that requires remedial external intervention. Their work is widely appreciated, although some households do resist their interventions, and figures of authority sometimes question their manner and expertise. The material challenges that they face have both practical and community aspects, since coping with scarcity brings community members together. The implication of this is that programmes co-designed with CHWs will be easier to implement because of their relevance to their practices and experiences, whereas those that assume a deficit model or seek to use CHWs as an instrument to implement external priorities are likely to disrupt their work.

  12. Teaching in English-medium programmes

    DEFF Research Database (Denmark)

    Lauridsen, Karen M.; Cozart, Stacey Marie

    in such a way that they take into account their students’ diverse cultural and linguistic backgrounds and use them as a strength in the classroom; and they should be able to engage all students in joint learning activities so that both the Danish and the international students benefit from the programme......This contribution describes and discusses the module Teaching in English-medium programmes, an elective module offered as part of the teacher training programme for assistant professors (“adjunktpædagogikum”) at Aarhus University. In order to complete the whole programme, assistant professors must...... have at least one such elective module (http://upnet.au.dk/adjunktkursus/). Aarhus University offers the teacher training programme in Danish and in English for international faculty. Teaching in English-medium programmes is part of the Danish track, but taught through English. Building...

  13. Controllable forms of natural background radiation

    International Nuclear Information System (INIS)

    1988-03-01

    RENA is a research programm into the controllable forms of natural background radiation, which cover the activities originating from the naturally occurring radionuclides enhanced by human intervention. In the RENA-program emphasis lays upon the policy aspects of environmental-hygienic, economical and governmental character. (H.W.). 15 refs.; 2 tabs

  14. A formative evaluation of a staff reward and recognition programme

    Directory of Open Access Journals (Sweden)

    Saleemah Salie

    2012-07-01

    Research purpose: The main aim of this evaluation was to test the plausibility of the programme theory underlying a staff reward and recognition programme within a retail setting. Secondary aims were to assess whether or not the programme was implemented as intended and whether or not its outcomes were well defined. Motivation for the study: Different groups of people may have different assumptions about whether a reward and recognition programme works or not. This evaluation was motivated by the different assumptions held by programme stakeholders, programme recipients and social science researchers regarding the programme. Research design, approach and method: This formative evaluation used a descriptive design. Primary qualitative data were collected by means of structured interviews with the Human Resource Development (HRD Facilitator and ten programme participants. Main findings: The results showed that the programme theory was not plausible and that the programme was not implemented as intended. Although the HRD Facilitator and the participants agreed that the programme led to improved customer service, they disagreed about the other programme outcomes. Practical/managerial implications: This evaluation contains practical suggestions for improving the programme theory, the programme implementation process and the redefinition of the outcomes of the programme as standard performance indicators. Contribution/value-add: This evaluation contributed to the limited literature on the effect of reward and recognition programmes. Whilst there is a vast amount of literature pertaining to such programmes, very few formal evaluations exist about them.

  15. IGNITOR Programme

    International Nuclear Information System (INIS)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo

    2005-01-01

    While finalising the design of IGNITOR, considerable progress has been made in understanding the plasma physics regimes expected to be experimented on the machine. Even before reaching its main goals, IGNITOR will produce intermediate results and provide assessments for some of the most critical extrapolation involved in designing burning plasma experiments. Although significant tritium burning is a necessary step for any new, advanced fusion facility, it is important to note that even with hydrogen, helium and deuterium IGNITOR will provide results, which alone would justify the machine's construction. Another significant feature of IGNITOR - and probably the most important - is the high level of internal power density that will be available

  16. IGNITOR Programme

    Energy Technology Data Exchange (ETDEWEB)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo (ed.)

    2005-07-01

    While finalising the design of IGNITOR, considerable progress has been made in understanding the plasma physics regimes expected to be experimented on the machine. Even before reaching its main goals, IGNITOR will produce intermediate results and provide assessments for some of the most critical extrapolation involved in designing burning plasma experiments. Although significant tritium burning is a necessary step for any new, advanced fusion facility, it is important to note that even with hydrogen, helium and deuterium IGNITOR will provide results, which alone would justify the machine's construction. Another significant feature of IGNITOR - and probably the most important - is the high level of internal power density that will be available.

  17. Design and hybridization of spectrometric amplification line with low background noise; Conception et hybridisation d`une chaine d`amplification spectrometrique a bas bruit de fond

    Energy Technology Data Exchange (ETDEWEB)

    Sun, S

    1992-07-01

    The work of this thesis must be associated with the realization of EUROGAM detector. This device will be composed in a first time of 45 Germanium gamma radiation detectors (each being surrounded with 10 BGO detectors). The purpose of this thesis was the design and the miniaturization of the amplification line which must be associated with each Germanium detector (are also included the circuit of ballistic shortage correction). The design and study of amplifier has been effected with the help of computer-aided design in using SPICE software. The details are explained widely but in another part, the author studies the theoretical interpretation of disturbing phenomena.

  18. Building a global business continuity programme.

    Science.gov (United States)

    Lazcano, Michael

    2014-01-01

    Business continuity programmes provide an important function within organisations, especially when aligned with and supportive of the organisation's goals, objectives and organisational culture. Continuity programmes for large, complex international organisations, unlike those for compact national companies, are more difficult to design, build, implement and maintain. Programmes for international organisations require attention to structural design, support across organisational leadership and hierarchy, seamless integration with the organisation's culture, measured success and demonstrated value. This paper details practical, but sometimes overlooked considerations for building successful global business continuity programmes.

  19. Mentoring Programmes

    DEFF Research Database (Denmark)

    Poulsen, Kirsten M.

    2013-01-01

    Purpose: The purpose of this paper is to give an introduction to the definition and learning process of mentoring, a structured overview of the value of mentoring for mentees, mentors, organisations and society, as well as present the key element for designing and implementing successful mentoring...

  20. Grip on challenging behaviour: a multidisciplinary care programme for managing behavioural problems in nursing home residents with dementia. Study protocol

    NARCIS (Netherlands)

    Zwijsen, S.A.; Smalbrugge, M.; Zuidema, S.U.; Koopmans, R.T.C.M.; Bosmans, J.E.; Tulder, M.W. van; Eefsting, J.A.; Gerritsen, D.L.; Pot, A.M.

    2011-01-01

    BACKGROUND: Behavioural problems are common in nursing home residents with dementia and they often are burdensome for both residents and nursing staff. In this study, the effectiveness and cost-effectiveness of a new care programme for managing behavioural problems will be evaluated. METHODS/DESIGN:

  1. Grip on challenging behaviour: a multidisciplinary care programme for managing behavioural problems in nursing home residents with dementia. Study protocol

    NARCIS (Netherlands)

    Zwijsen, S.A.; Smalbrugge, M.; Zuidema, S.U.; Koopmans, R.T.C.M.; Bosmans, J.E.; van Tulder, M.W.; Eefsting, J.A.; Gerritsen, D.L.; Pot, A.M.

    2011-01-01

    Background: Behavioural problems are common in nursing home residents with dementia and they often are burdensome for both residents and nursing staff. In this study, the effectiveness and cost-effectiveness of a new care programme for managing behavioural problems will be evaluated. Methods/Design.

  2. Qualitative Evaluation of a Physical Activity Health Promotion Programme for People with Intellectual Disabilities in a Group Home Setting

    Science.gov (United States)

    Dixon-Ibarra, A.; Driver, S.; Nery-Hurwit, M.; VanVolkenburg, H.

    2018-01-01

    Background: There is a lack of health promotion programming designed to change the physical activity environment of the group home setting. The Menu-Choice programme assists staff in creating physical activity goals alongside residents with intellectual disabilities and provides strategies to incorporate activity into the group home schedule. The…

  3. Programmable pulse generator

    International Nuclear Information System (INIS)

    Xue Zhihua; Lou Binqiao; Duan Xiaohui

    2002-01-01

    The author introduces the design of programmable pulse generator that is based on a micro-controller and controlled by RS232 interface of personal computer. The whole system has good stability. The pulse generator can produce TTL pulse and analog pulse. The pulse frequency can be selected by EPLD. The voltage amplitude and pulse width of analog pulse can be adjusted by analog switches and digitally-controlled potentiometers. The software development tools of computer is National Instruments LabView5.1. The front panel of this virtual instrumentation is intuitive and easy-to-use. Parameters can be selected and changed conveniently by knob and slide

  4. Accelerator programme at CAT

    International Nuclear Information System (INIS)

    Ramamurthi, S.S.

    1991-01-01

    The Accelerator Programme at the Centre for Advanced Technology (CAT), Indore, has very broad based concept under which all types of accelerators are to be taken up for design and fabrication. This centre will be housing a wide variety of accelerators to serve as a common facility for the universities, national laboratories in addition to laboratories under the Department of Atomic Energy. In the first phase of the programme, a series of electron accelerators are designed and fabricated. They are synchrotron radiation sources of 450 MeV (INDUS-I) and of 2 GeV (INDUS-II), microtron upto energy of 20 MeV, linear accelerator upto 20 MeV, and DC Accelerator for industrial irradiation upto 750 KeV and 20 KW. A proton accelerator of 300 MeV with 20 MeV linac injector is also designed. CAT is also developing a strong base for support technologies like ultra high vacuum, radio frequency and microwaves, DC pulsed and superconducting magnets, power supplies and controls etc. These technologies are very useful for other industrial applications also. To develop user groups to utilise INDUS-II synchrotron radiation source, a batch production of rotating Anode X-ray generators with power supplies has been initiated. So also, the sputter ion pumps, electron guns, turbo molecular pumps are brought into batch production. (author)

  5. Effect of a combined education and eHealth programme on the control of oral anticoagulation patients (PORTALS study): a parallel cohort design in Dutch primary care.

    Science.gov (United States)

    Talboom-Kamp, Esther P W A; Verdijk, Noortje A; Kasteleyn, Marise J; Harmans, Lara M; Talboom, Irvin J S H; Numans, Mattijs E; Chavannes, Niels H

    2017-09-27

    To analyse the effect on therapeutic control and self-management skills of the implementation of self-management programmes, including eHealth by e-learning versus group training. Primary Care Thrombosis Service Center. Of the 247 oral anticoagulation therapy (OAT) patients, 63 started self-management by e-learning, 74 self-management by group training and 110 received usual care. Parallel cohort design with two randomised self-management groups (e-learning and group training) and a group receiving usual care. The effect of implementation of self-management on time in therapeutic range (TTR) was analysed with multilevel linear regression modelling. Usage of a supporting eHealth platform and the impact on self-efficacy (Generalised Self-Efficacy Scale (GSES)) and education level were analysed with linear regression analysis. After intervention, TTR was measured in three time periods of 6 months. (1) TTR, severe complications,(2) usage of an eHealth platform,(3) GSES, education level. Analysis showed no significant differences in TTR between the three time periods (p=0.520), the three groups (p=0.460) or the groups over time (p=0.263). Comparison of e-learning and group training showed no significant differences in TTR between the time periods (p=0.614), the groups (p=0.460) or the groups over time (p=0.263). No association was found between GSES and TTR (p=0.717) or education level and TTR (p=0.107). No significant difference was found between the self-management groups in usage of the platform (0-6 months p=0.571; 6-12 months p=0.866; 12-18 months p=0.260). The percentage of complications was low in all groups (3.2%; 1.4%; 0%). No differences were found between OAT patients trained by e-learning or by a group course regarding therapeutic control (TTR) and usage of a supporting eHealth platform. The TTR was similar in self-management and regular care patients. With adequate e-learning or group training, self-management seems safe and reliable for a selected

  6. The management of cardiovascular disease in the Netherlands: analysis of different programmes

    Directory of Open Access Journals (Sweden)

    Jane M. Cramm

    2013-08-01

    Full Text Available Background: Disease management programmes are increasingly used to improve the efficacy and effectiveness of chronic care delivery.But, disease management programme development and implementation is a complex undertaking that requires effective decision-making.Choices made in the earliest phases of programme development are crucial, as they ultimately impact costs, outcomes and sustainability. Methods: To increase our understanding of the choices that primary healthcare practices face when implementing such programmes and to stimulate successful implementation and sustainability, we compared the early implementation of eight cardiovascular disease management programmes initiated and managed by healthcare practices in various regions of the Netherlands. Using a mixed-methods design, we identified differences in and challenges to programme implementation in terms of context, patient characteristics, disease management level, healthcare utilisation costs, development costs and health-related quality of life. Results: Shifting to a multidisciplinary, patient-centred care pathway approach to disease management is demanding for organisations, professionals and patients, and is especially vulnerable when sustainable change is the goal. Funding is an important barrier to sustainable implementation of cardiovascular disease management programmes, although development costs of the individual programmes varied considerably in relation to the length of the development period. The large number of professionals involved in combination with duration of programme development was the largest cost drivers. While Information and Communication Technology systems to support the new care pathways did not directly contribute to higher costs, delays in implementation indirectly did. Conclusions: Developing and implementing cardiovascular disease management programmes is time-consuming and challenging. Multidisciplinary, patient-centred care demands multifaceted changes

  7. The management of cardiovascular disease in the Netherlands: analysis of different programmes

    Directory of Open Access Journals (Sweden)

    Jane M. Cramm

    2013-08-01

    Full Text Available Background: Disease management programmes are increasingly used to improve the efficacy and effectiveness of chronic care delivery.But, disease management programme development and implementation is a complex undertaking that requires effective decision-making.Choices made in the earliest phases of programme development are crucial, as they ultimately impact costs, outcomes and sustainability.Methods: To increase our understanding of the choices that primary healthcare practices face when implementing such programmes and to stimulate successful implementation and sustainability, we compared the early implementation of eight cardiovascular disease management programmes initiated and managed by healthcare practices in various regions of the Netherlands. Using a mixed-methods design, we identified differences in and challenges to programme implementation in terms of context, patient characteristics, disease management level, healthcare utilisation costs, development costs and health-related quality of life.Results: Shifting to a multidisciplinary, patient-centred care pathway approach to disease management is demanding for organisations, professionals and patients, and is especially vulnerable when sustainable change is the goal. Funding is an important barrier to sustainable implementation of cardiovascular disease management programmes, although development costs of the individual programmes varied considerably in relation to the length of the development period. The large number of professionals involved in combination with duration of programme development was the largest cost drivers. While Information and Communication Technology systems to support the new care pathways did not directly contribute to higher costs, delays in implementation indirectly did.Conclusions: Developing and implementing cardiovascular disease management programmes is time-consuming and challenging. Multidisciplinary, patient-centred care demands multifaceted changes in

  8. The management of cardiovascular disease in the Netherlands: analysis of different programmes

    Science.gov (United States)

    Cramm, Jane M.; Tsiachristas, Apostolos; Walters, Bethany H.; Adams, Samantha A.; Bal, Roland; Huijsman, Robbert; Rutten-Van Mölken, Maureen P.M.H.; Nieboer, Anna P.

    2013-01-01

    Background Disease management programmes are increasingly used to improve the efficacy and effectiveness of chronic care delivery. But, disease management programme development and implementation is a complex undertaking that requires effective decision-making. Choices made in the earliest phases of programme development are crucial, as they ultimately impact costs, outcomes and sustainability. Methods To increase our understanding of the choices that primary healthcare practices face when implementing such programmes and to stimulate successful implementation and sustainability, we compared the early implementation of eight cardiovascular disease management programmes initiated and managed by healthcare practices in various regions of the Netherlands. Using a mixed-methods design, we identified differences in and challenges to programme implementation in terms of context, patient characteristics, disease management level, healthcare utilisation costs, development costs and health-related quality of life. Results Shifting to a multidisciplinary, patient-centred care pathway approach to disease management is demanding for organisations, professionals and patients, and is especially vulnerable when sustainable change is the goal. Funding is an important barrier to sustainable implementation of cardiovascular disease management programmes, although development costs of the individual programmes varied considerably in relation to the length of the development period. The large number of professionals involved in combination with duration of programme development was the largest cost drivers. While Information and Communication Technology systems to support the new care pathways did not directly contribute to higher costs, delays in implementation indirectly did. Conclusions Developing and implementing cardiovascular disease management programmes is time-consuming and challenging. Multidisciplinary, patient-centred care demands multifaceted changes in routine care. As

  9. Evaluation of a Surfing Programme Designed to Increase Personal Well-Being and Connectedness to the Natural Environment among "At Risk" Young People

    Science.gov (United States)

    Hignett, Amanda; White, Mathew P.; Pahl, Sabine; Jenkin, Rebecca; Froy, Mod Le

    2018-01-01

    Outdoor activities can be an important complement to classroom learning, especially for children/young people excluded, or at risk of exclusion, from mainstream schooling. The current research explored the impact of a 12-week surfing programme among such a group in the UK. Pre-post data on physiological health (heart rate (HR)/blood pressure),…

  10. COPE-ICD: A randomised clinical trial studying the effects and meaning of a comprehensive rehabilitation programme for ICD recipients -design, intervention and population

    DEFF Research Database (Denmark)

    Berg, Selina Kikkenborg; Svendsen, Jesper H; Zwisler, Ann-Dorthe

    2011-01-01

    Growing evidence exists that living with an ICD can lead to fear and avoidance behaviour including the avoidance of physical activity. It has been suggested that psychological stress can increase the risk of shock and predict death. Small studies have indicated a beneficial effect arising from ex...... exercise training and psychological intervention, therefore a large-scale rehabilitation programme was set up....

  11. Analysis of disconnected diallel mating designs II: results from a third generation progeny test of the New Zealand radiata pine improvement programme.

    Science.gov (United States)

    J.N. King; M.J. Carson; G.R. Johnson

    1998-01-01

    Genetic parameters from a second generation (F2) disconnected diallel progeny test of the New Zealand radiata pine improvement programme are presented. Heritability estimates of growth and yield traits of 0.2 are similar to progeny test results of the previous generation (F1) generation tests. A trend of declining dominance...

  12. National programme: Finland

    International Nuclear Information System (INIS)

    Forsten, J.

    1986-01-01

    Finland's programmes in the field of reactor pressure components are presented in this paper. The following information on each of these programmes is given: the brief description of the programme; the programme's schedule and duration; the name of the project manager

  13. Radiation research within the framework programmes of the European Commission

    Energy Technology Data Exchange (ETDEWEB)

    Karaoglou, A.; Kelly, G.N.; Desmet, G.; Menzel, H.G.; Schibilla, H.; Olast, M.; Gasperini, F.; Chadwick, K.H.; Sinnave, J. [European Commission Directorate General science, Brussels (Belgium). Research and Development, Radiation Protection Research Action

    1997-09-01

    The background to the radiation protection research and training programme of the European Commission is described in the presentation. The objectives and achievements of the third framework programme are summarised together with a description of how the achievements led to the establishment of the priorities for the fourth framework programme. Indications on the preliminary prospects for the fifth framework programme, 1998-2002 are also given. (6 refs.).

  14. Californium loan programme

    International Nuclear Information System (INIS)

    1974-01-01

    The offer of the United States to loan Californium-252 sources to the IAEA was made by Dr. Glenn T. Seaborg, then chairman of the USAEC, in his opening statement at the 15th. General Conference of the IAEA held in Vienna in 1971. The purpose of this loan was to make neutron emitting sources available to universities in the Member States for use in educational programmes. The sources, in the form of small needles designed for medical use in radiation therapy, were judged highly suitable for didactic applications due to their small size, limited activity and well documented radiological parameters. Subsequently, in May 1973, the Director General announced the availability of the Californium sources to the Member States. To date, numerous sources have been loaned to universities in Czechoslovakia, Costa Rica, the Federal Republic of Germany, Ghana, India, Iran, Israel, Japan, South Africa, Switzerland, the United Kingdom and Uruguay; additional applications for loans are being processed. It is anticipated that the loan programme will be terminated in 1975 once all the available sources have been distributed. n order to provide guidance for the Member States on the safe exploitation of these sources, a prototype use and storage facility was designed by IAEA staff of the Dosimetry Section of the Division of Life Sciences, and constructed at the IAEA laboratory in Seibersdorf, Austria. Figures 2-5 illustrate some of the details of this container, which is being given to the Ghana Nuclear Centre in support of a training programme for students at the university in Accra. Further advice to users of these sources will be provided by the publication of an instructional syllabus, a laboratory manual for experiments and the safety precautions inherent in the proper handling of neutron emitting radionuclides, authored by Professors Erich J. Hall and Harald H. Rossi of Columbia University. The syllabus and manual will be published as part of the IAEA Technical Series in September

  15. External man-induced events in relation to nuclear power plant design. A Safety Guide. A publication within the NUSS programme

    International Nuclear Information System (INIS)

    1996-01-01

    In order to take account of lessons learned since the first publication of the NUSS programme was issued, it was decided in 1986 to revise and reissue the Codes and Safety Guides. During the original development of these publications, as well as during the revision process, care was taken to ensure that all Member States, in particular those with active nuclear power programmes, could provide their input. Several independent reviews took place including a final one by the Nuclear Safety Standards Advisory Group (NUSSAG). The revised Codes were approved by the Board of Governors in June 1988. In the revision process new developments in technology and methods of analysis have been incorporated on the basis of international consensus. It is hoped that the revised Codes will be used, and that they will be accepted and respected by Member States as a basis for regulation of the safety of power reactors within the national legal and regulatory framework. 28 refs, 9 figs, 1 tab

  16. A EUropean study on effectiveness and sustainability of current Cardiac Rehabilitation programmes in the Elderly: Design of the EU-CaRE randomised controlled trial.

    Science.gov (United States)

    Prescott, Eva; Meindersma, Esther P; van der Velde, Astrid E; Gonzalez-Juanatey, Jose R; Iliou, Marie Christine; Ardissino, Diego; Zoccai, Giuseppe Biondi; Zeymer, Uwe; Prins, Leonie F; Van't Hof, Arnoud Wj; Wilhelm, Matthias; de Kluiver, Ed P

    2016-10-01

    Cardiac rehabilitation (CR) is an evidence-based intervention to increase survival and quality of life. Yet studies consistently show that elderly patients are less frequently referred to CR, show less uptake and more often drop out of CR programmes. The European study on effectiveness and sustainability of current cardiac rehabilitation programmes in the elderly (EU-CaRE) project consists of an observational study and an open prospective, investigator-initiated multicentre randomised controlled trial (RCT) involving mobile telemonitoring guided CR (mCR). The aim of EU-CaRE is to map the efficiency of current CR of the elderly in Europe, and to investigate whether mCR is an effective alternative in terms of efficacy, adherence and sustainability. The EU-CaRE study includes patients aged 65 years or older with ischaemic heart disease or who have undergone heart valve surgery. A total of 1760 patients participating in existing CR programmes in eight regions of Europe will be included. Of patients declining regular CR, 238 will be included in the RCT and randomised in two study arms. The experimental group (mCR) will receive a personalised home-based programme while the control group will receive no advice or coaching throughout the study period. Outcomes will be assessed after the end of CR and at 12 months follow-up. The primary outcome is VO 2peak and secondary outcomes include variables describing CR uptake, adherence, efficacy and sustainability. The study will provide important information to improve CR in the elderly. The EU-CaRE RCT is the first European multicentre study of mCR as an alternative for elderly patients not attending usual CR. © The European Society of Cardiology 2016.

  17. Effectiveness of a Multi-Component Smoking Cessation Support Programme (McSCSP) for Patients with Severe Mental Disorders: Study Design

    Science.gov (United States)

    Garcia-Portilla, Maria Paz; Garcia-Alvarez, Leticia; Saiz, Pilar Alejandra; Diaz-Mesa, Eva; Galvan, Gonzalo; Sarramea, Fernando; Garcia-Blanco, Josefa; Elizagarate, Edorta; Bobes, Julio

    2013-01-01

    Only a few studies have examined the efficacy and safety of smoking cessation programmes in patients with mental disorders. The aim of this paper is to describe in detail the methodology used in the study as well as the Multi-component Smoking Cessation Support Programme in terms of pharmacological treatments and psychological interventions. An open-label 9-month follow-up study was conducted in Spain. A total of 82 clinically stable outpatients with schizophrenia, schizoaffective or bipolar disorder were enrolled. Treatment consisted of a programme specifically developed by the research team for individuals with severe mental disorders. The programme consisted of two phases: (1) weekly individual motivational therapy for 4–12 weeks, and (2) a 12-week active treatment phase. During this phase, at each study visit patients received a one- or two-week supply of medication (transdermal nicotine patches, varenicline or bupropion) with instructions on how to take it, in addition to group psychotherapy for smoking cessation. Evaluations were performed: (1) at the time of enrolment in the study, (2) during the 12-week active treatment phase of the study (weekly for the first 4 weeks and then biweekly), and (3) after the end of this phase (two follow-up assessments at weeks 12 and 24). Evaluations included: (1) smoking history, (2) substance use, (3) psychopathology, (4) adverse events, and (5) laboratory tests. The importance of this study lies in addressing a topical issue often ignored by psychiatrists: the unacceptably high rates of tobacco use in patients with severe mental disorders. PMID:24368428

  18. Effectiveness of a Multi-Component Smoking Cessation Support Programme (McSCSP for Patients with Severe Mental Disorders: Study Design

    Directory of Open Access Journals (Sweden)

    Maria Paz Garcia-Portilla

    2013-12-01

    Full Text Available Only a few studies have examined the efficacy and safety of smoking cessation programmes in patients with mental disorders. The aim of this paper is to describe in detail the methodology used in the study as well as the Multi-component Smoking Cessation Support Programme in terms of pharmacological treatments and psychological interventions. An open-label 9-month follow-up study was conducted in Spain. A total of 82 clinically stable outpatients with schizophrenia, schizoaffective or bipolar disorder were enrolled. Treatment consisted of a programme specifically developed by the research team for individuals with severe mental disorders. The programme consisted of two phases: (1 weekly individual motivational therapy for 4–12 weeks, and (2 a 12-week active treatment phase. During this phase, at each study visit patients received a one- or two-week supply of medication (transdermal nicotine patches, varenicline or bupropion with instructions on how to take it, in addition to group psychotherapy for smoking cessation. Evaluations were performed: (1 at the time of enrolment in the study, (2 during the 12-week active treatment phase of the study (weekly for the first 4 weeks and then biweekly, and (3 after the end of this phase (two follow-up assessments at weeks 12 and 24. Evaluations included: (1 smoking history, (2 substance use, (3 psychopathology, (4 adverse events, and (5 laboratory tests. The importance of this study lies in addressing a topical issue often ignored by psychiatrists: the unacceptably high rates of tobacco use in patients with severe mental disorders.

  19. Evaluation of a surfing programme designed to increase personal well-being and connectedness to the natural environment among ‘at risk’ young people

    OpenAIRE

    Hignett, A; White, MP; Pahl, S; Jenkin, R; Froy, ML

    2018-01-01

    © 2017 Institute for Outdoor Learning. Outdoor activities can be an important complement to classroom learning, especially for children/young people excluded, or at risk of exclusion, from mainstream schooling. The current research explored the impact of a 12-week surfing programme among such a group in the UK. Pre-post data on physiological health (heart rate (HR)/blood pressure), self-reported well-being (life and domain satisfaction), connectedness (e.g. to nature, school), environmental a...

  20. The European structural integrity research programme

    International Nuclear Information System (INIS)

    Townley, C.H.A.; Acker, D.; Laue, H.

    1990-01-01

    A thermal hydraulics evaluation of the European Fast Reactor (EFR) design followed by structural analysis is presented in this article to assess the structural integrity research programme to date. Improved design methods are being achieved as a result of the structural integrity programme for the EFR. Excellent collaboration between the nationally based research organizations and the design and construction companies has been important in achieving these improvements. (UK)

  1. TKS-2006. Nuclear waste management of the Olkiluoto and Loviisa power plants: Programme for research, development and technical design for 2007-2009

    International Nuclear Information System (INIS)

    2006-11-01

    The report at hand describes the status and near-term future plans of the research and technology development (RTD) for the nuclear waste management of the Olkiluoto and Loviisa nuclear power plants. Since the facilities for the management and disposal of low- and intermediate-level wastes have already been built and are in operation, and the decommissioning of the nuclear power plant will only take place far away in the future, the emphasis of this report is on the RTD related to the disposal of spent fuel. For the RTD programme on spent fuel disposal the report is also a part of the interim reporting proposed by the Finnish Radiation and Nuclear Safety Authority (STUK) in the early 2000's. Other reports related to the interim reporting include the updated facility description and the separate reports on the expected evolution of the spent fuel repository, the summary of the biosphere studies and the updated site description ('Site 2006'). Pursuant to the guidelines given by the Ministry of Trade and Industry (KTM) Posiva aims at submission of the application of the construction license for the disposal facility by the end of the year 2012. By the end of 2009 Posiva will present an outline of the whole documentation intended for the application. In practice this requires that the components of the disposal system are specified in sufficient detail for the actual implementation. Accordingly, the principal goals of the next three-year period 2007 - 2009 will be: to define the performance goals for the main components of the disposal system in a way that the system as a whole fulfils the safety requirements set for disposal, and to demonstrate that these requirements can be met by the technology available. The report reviews the present status of the performance goals for the main components. For most main components (release barriers) the principal performance goals have already been defined and their feasibility has been demonstrated. The encapsulation technology

  2. User's manual for the REDIFFUSION programme

    International Nuclear Information System (INIS)

    Grimstone, M.J.

    1978-06-01

    REDIFFUSION is a programme developed for use in shield design. It carries out calculations of neutron and gamma-ray penetration in one-dimensional geometries using methods based on diffusion theory which provide approximate but rapid solutions. A description of the capabilities of the programme is given together with instructions for its use. (author)

  3. African Primary Care Research: Performing a programme evaluation

    OpenAIRE

    Dudley, Lilian

    2014-01-01

    Abstract This article is part of a series on Primary Care Research in the African context and focuses on programme evaluation. Different types of programme evaluation are outlined: developmental, process, outcome and impact. Eight steps to follow in designing your programme evaluation are then described in some detail: engage stakeholders; establish what is known; describe the programme; define the evaluation and select a study design; define the indicators; plan and manage data collection an...

  4. Background and design of the ACCA-EAPCI registry on ST-segment elevation myocardial infarction of the European Society of Cardiology.

    Science.gov (United States)

    Zeymer, Uwe; Ludman, Peter; Danchin, Nicolas; Kala, Petr; Maggioni, Aldo P; Weidinger, Franz

    2018-02-01

    Treatment of patients with acute ST-segment elevation myocardial infarction has improved over past decades, with reperfusion therapy being the cornerstone in the acute phase. Based on the results of large randomised trials the current ST-segment elevation myocardial infarction guidelines of the European Society of Cardiology (ESC) recommend acute treatments and secondary prevention therapies. However, there are large variations between ESC countries in the treatment of patients presenting with ST-segment elevation myocardial infarction. Therefore the ESC has initiated a prospective registry to evaluate the current treatments and outcomes of these patients with a special focus on adherence to the ESC guidelines and on differences between countries and regions. This paper describes the methodology and design of the ST-segment elevation myocardial infarction registry conducted in collaboration of the Acute Cardiac Care Association and the European Association of Percutaneous Coronary Intervention.

  5. Cosmic Microwave Background Timeline

    Science.gov (United States)

    Cosmic Microwave Background Timeline 1934 : Richard Tolman shows that blackbody radiation in an will have a blackbody cosmic microwave background with temperature about 5 K 1955: Tigran Shmaonov anisotropy in the cosmic microwave background, this strongly supports the big bang model with gravitational

  6. Requirements for laboratory animals in health programmes*

    OpenAIRE

    Held, J. R.

    1981-01-01

    Laboratory animals are essential for the successful execution of many health programmes. A wide variety of animal models is used in the worldwide efforts to improve the control of various diseases, and in the basic research needed to improve health care. Biomedical programmes require specially-bred animals reared under controlled conditions, with close attention given to such factors as physical environment, nutrition, microbiological status, and genetic background. The need for a regular sup...

  7. A leadership programme for critical care.

    Science.gov (United States)

    Crofts, Linda

    2006-08-01

    This paper describes the genesis, design and implementation of a leadership programme for critical care. This was an initiative funded by the National Health Service (NHS) Nursing Leadership Project and had at the core of its design flexibility to meet the needs of the individual hospitals, which took part in it. Participation was from the multi-disciplinary critical care team. Six NHS hospitals took part in the programme which was of 20 days duration and took place on hospital sites. The programme used the leadership model of as its template and had a number of distinct components; a baseline assessment, personal development, principles of leadership and critical case reviews. The programme was underpinned by three themes; working effectively in multi-professional teams to provide patient focussed care, managing change through effective leadership and developing the virtual critical care service. Each group set objectives pertinent to their own organisation's needs. The programme was evaluated by a self-reporting questionnaire; group feedback and feedback from stakeholders. Programme evaluation was positive from all the hospitals but it was clear that the impact of the programme varied considerably between the groups who took part. It was noted that there was some correlation between the success of the programme and organisational 'buy in' as well as the organisational culture within which the participants operated. A key feature of the programme success was the critical case reviews, which were considered to be a powerful learning tool and medium for group learning and change management.

  8. Understanding student early departure from a Master of Public Health programme in South Africa

    Directory of Open Access Journals (Sweden)

    T Dlungwane

    2017-10-01

    Full Text Available Background. Student departure from university without completing a qualification is a major concern in higher education. Higher Education South Africa reported that in undergraduate studies, 35% of students depart after the first year and only 15% of students who enrol complete their degree within the minimum permissible time. At postgraduate level, the departure from Masters programmes in South Africa (SA ranged from 30% to 67% in 2010. Early departure refers to students who leave an academic programme within the first semester of commencing their studies. At one SA university, there were a total of 109 first-time Master of Public Health (MPH student registrations in 2013 and 2014. By the end of the first semester in the respective years, a total of 27 students actively deregistered from the programme and 11 students did not sit the first-semester examinations, representing an aggregate 35% rate of early departure. The factors associated with early departure at the University of KwaZulu-Natal are not well understood. Objective. To understand factors associated with early departure in the MPH programme at the University of KwaZulu-Natal. Method. A mixed-methods design was implemented. Students who departed within the first semester of commencing the MPH programme in 2013/2014 were followed up. Data were collected using self-administered questionnaires and in-depth interviews. Results. Failure to balance work and academic obligations with poor time management, stress and academic demands related to the programme, and insufficient academic progress were found to be associated with student early departure from the MPH programme. Conclusion. Student early departure from the MPH programme was influenced by multifaceted factors. Senior students can mentor new students as early as possible in their programme. The orientation block should include development activities such as time management, stress management and effective study skills to assist

  9. Hanford Site background: Part 1, Soil background for nonradioactive analytes

    International Nuclear Information System (INIS)

    1993-04-01

    The determination of soil background is one of the most important activities supporting environmental restoration and waste management on the Hanford Site. Background compositions serve as the basis for identifying soil contamination, and also as a baseline in risk assessment processes used to determine soil cleanup and treatment levels. These uses of soil background require an understanding of the extent to which analytes of concern occur naturally in the soils. This report documents the results of sampling and analysis activities designed to characterize the composition of soil background at the Hanford Site, and to evaluate the feasibility for use as Sitewide background. The compositions of naturally occurring soils in the vadose Zone have been-determined for-nonradioactive inorganic and organic analytes and related physical properties. These results confirm that a Sitewide approach to the characterization of soil background is technically sound and is a viable alternative to the determination and use of numerous local or area backgrounds that yield inconsistent definitions of contamination. Sitewide soil background consists of several types of data and is appropriate for use in identifying contamination in all soils in the vadose zone on the Hanford Site. The natural concentrations of nearly every inorganic analyte extend to levels that exceed calculated health-based cleanup limits. The levels of most inorganic analytes, however, are well below these health-based limits. The highest measured background concentrations occur in three volumetrically minor soil types, the most important of which are topsoils adjacent to the Columbia River that are rich in organic carbon. No organic analyte levels above detection were found in any of the soil samples

  10. Rational and design of an overfeeding protocol in constitutional thinness: Understanding the physiology, metabolism and genetic background of resistance to weight gain.

    Science.gov (United States)

    Ling, Yiin; Galusca, Bogdan; Hager, Jorg; Feasson, Leonard; Valsesia, Armand; Epelbaum, Jacques; Alexandre, Virginie; Wynn, Emma; Dinet, Cécile; Palaghiu, Radu; Peoc'h, Michel; Boirie, Yves; Montaurier, Christophe; Estour, Bruno; Germain, Natacha

    2016-10-01

    Constitutional thinness (CT) is a natural state of underweight (13-17.5kg/m 2 ) without the presence of any eating disorders and abnormal hormonal profile, and with preserved menses in women. We previously conducted a four-week fat overfeeding study showing weight gain resistance in CT women and one of our main results was the identification of an energy gap: a positive energy balance (higher energy intake than energy expenditure). This new overfeeding study is designed to confirm the energy gap and propose mechanistic hypothesis. A 2-week overfeeding (daily consumption of one bottle of Renutryl ® Booster (600kcal, 30g protein, 72g carbohydrate, 21g fat) on top of the dietary intake) is performed to compare 15 women and men in each CT group (Body Mass Index [BMI]controls (BMI 20-25kg/m 2 ). Bodyweight, food intake, energy expenditure (canopy, calorimetric chamber and Actiheart), body composition (DXA), appetite regulatory hormone profiles after a test meal, proteomics, metabolomics, urinary metabolic profiles, stool microbiome and lipids, fat and muscle transcriptomics are monitored before and after overfeeding. Data inter-linking will be able to be established with results of this study. The findings could possibly open to therapeutic approaches to help CT patients to gain weight as well as provide a better understanding of energy regulation with regard to treat obesity (resistance to weight loss), a mirror image of CT (resistance to weight gain). Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  11. Managed ventricular pacing vs. conventional dual-chamber pacing for elective replacements: the PreFER MVP study: clinical background, rationale, and design.

    Science.gov (United States)

    Quesada, Aurelio; Botto, Gianluca; Erdogan, Ali; Kozak, Milan; Lercher, Peter; Nielsen, Jens Cosedis; Piot, Olivier; Ricci, Renato; Weiss, Christian; Becker, Daniel; Wetzels, Gwenn; De Roy, Luc

    2008-03-01

    Several clinical studies have shown that, in patients with intact atrioventricular (AV) conduction, unnecessary chronic right ventricular (RV) pacing can be detrimental. The managed ventricular pacing (MVP) algorithm is designed to give preference to spontaneous AV conduction, thus minimizing RV pacing. The clinical outcomes of MVP are being studied in several ongoing trials in patients undergoing a first device implantation, but it is unknown to what extent MVP is beneficial in patients with a history of ventricular pacing. The purpose of the Prefer for Elective Replacement MVP (PreFER MVP) study is to assess the superiority of the MVP algorithm to conventional pacemaker and implantable cardioverter-defibrillator programming in terms of freedom from hospitalization for cardiovascular causes in a population of patients exposed to long periods of ventricular pacing. PreFER MVP is a prospective, 1:1 parallel, randomized (MVP ON/MVP OFF), single-blinded multi-centre trial. The study population consists of patients with more than 40% ventricular pacing documented with their previous device. Approximately, 600 patients will be randomized and followed for at least 24 months. The primary endpoint comprises cardiovascular hospitalization. The PreFER MVP trial is the first large prospective randomized clinical trial evaluating the effect of MVP in patients with a history of RV pacing.

  12. A review on the use of gas and steam turbine combined cycles as prime movers for large ships. Part I: Background and design

    International Nuclear Information System (INIS)

    Haglind, Fredrik

    2008-01-01

    The aim of the present paper is to review the prospects of using combined cycles as prime movers for large ships, like, container ships, tankers and bulk carriers. The paper is divided into three parts of which this paper constitutes Part I. Here, the environmental and human health concerns of international shipping are outlined. The regulatory framework relevant for shipping and the design of combined cycles are discussed. In Part II, previous work and experience are reviewed, and an overview of the implications of introducing combined cycles as prime movers is included. In Part III, marine fuels are discussed and the pollutant emissions of gas turbines are compared with those of two-stroke, slow-speed diesel engines. Environmental effects of shipping include contributions to the formation of ground-level ozone, acidification, eutrophication and climate impact. Tightening environmental regulations limit the fuel sulphur content and pollutant emissions. For moderate live steam pressures, a vertical HRSG of drum-type mounted directly over the gas turbine, is suggested to be a viable configuration that minimizes ground floor and space requirements

  13. Reactor Physics Programme

    International Nuclear Information System (INIS)

    De Raedt, C.

    2000-01-01

    The Reactor Physics and Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis on reactor fuel. This expertise is applied within the Reactor Physics and MYRRHA Research Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments. Progress and achievements in 1999 in the following areas are reported on: (1) investigations on the use of military plutonium in commercial power reactors; (2) neutron and gamma calculations performed for BR-2 and for other reactors; (3) the updating of neutron and gamma cross-section libraries; (4) the implementation of reactor codes; (6) the management of the UNIX workstations; and (6) fuel cycle studies

  14. Reactor Physics Programme

    Energy Technology Data Exchange (ETDEWEB)

    De Raedt, C

    2000-07-01

    The Reactor Physics and Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis on reactor fuel. This expertise is applied within the Reactor Physics and MYRRHA Research Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments. Progress and achievements in 1999 in the following areas are reported on: (1) investigations on the use of military plutonium in commercial power reactors; (2) neutron and gamma calculations performed for BR-2 and for other reactors; (3) the updating of neutron and gamma cross-section libraries; (4) the implementation of reactor codes; (6) the management of the UNIX workstations; and (6) fuel cycle studies.

  15. Development of an e-supported illness management and recovery programme for consumers with severe mental illness using intervention mapping, and design of an early cluster randomized controlled trial.

    Science.gov (United States)

    Beentjes, Titus A A; van Gaal, Betsie G I; Goossens, Peter J J; Schoonhoven, Lisette

    2016-01-19

    E-mental health is a promising medium to keep mental health affordable and accessible. For consumers with severe mental illness the evidence of the effectiveness of e-health is limited. A number of difficulties and barriers have to be addressed concerning e-health for consumers with severe mental illness. One possible solution might be to blend e-health with face-to-face delivery of a recovery-oriented treatment, like the Illness Management & Recovery (IMR) programme. This paper describes the development of an e-health application for the IMR programme and the design of an early clustered randomized controlled trial. We developed the e-IMR intervention according to the six-step protocol of Intervention Mapping. Consumers joined the development group to address important and relevant issues for the target group. Decisions during the six-step development process were based on qualitative evaluations of the Illness Management & Recovery programme, structured interviews, discussion in the development group, and literature reviews on qualitative papers concerning consumers with severe mental illness, theoretical models, behavioural change techniques, and telemedicine for consumers with severe mental illness. The aim of the e-IMR intervention is to help consumers with severe mental illness to involve others, manage achieving goals, and prevent relapse. The e-IMR intervention consists of face-to-face delivery of the Illness Management & Recovery programme and an e-health application containing peer-testimonials on videos, follow up on goals and coping strategies, monitoring symptoms, solving problems, and communication opportunities. We designed an early cluster randomized controlled trial that will evaluate the e-IMR intervention. In the control condition the Illness Management & Recovery programme is provided. The main effect-study parameters are: illness management, recovery, psychiatric symptoms severity, self-management, quality of life, and general health. The

  16. Energy Management Programmes for Industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-05

    The IEA Policy Pathway publications provide details on how to implement specific recommendations drawn from the IEA 25 Energy Efficiency Policy Recommendations. This Policy Pathway, jointly produced by the International Energy Agency and the Institute for Industrial Productivity, develops the critical steps for policy makers implementing energy management programmes for industry. Optimising energy use in industry is essential to improve industrial competitiveness and achieve wider societal goals such as energy security, economic recovery and development, climate change mitigation and environmental protection. While there is significant potential to decrease energy consumption in this sector, opportunities to improve energy efficiency are still under-exploited. Energy management programmes have shown to be instrumental in addressing many of the barriers that inhibit wide-scale uptake of energy management in industry. The Policy Pathway builds on lessons learned from country experiences and provides actionable guidance on how to plan and design, implement, evaluate and monitor energy management programmes for industry.

  17. Ghana's nuclear programme

    International Nuclear Information System (INIS)

    Ahafia, Albert K.

    1988-01-01

    The Paper gives the purpose of Ghana's Nuclear Programme and describes some specific research activities and peaceful applications of atomic energy in agriculture, medicine and industry. A discussion of some of the problem facing the programme concludes the Paper. (author)

  18. Status of sodium boiling noise detection programme at reactor research centre, India

    Energy Technology Data Exchange (ETDEWEB)

    Prabhakar, R; Elumalai, G [Reactor Engineering Laboratory, Reactor Research Centre, Chingleput, Tamil Nadu (India)

    1982-01-01

    Acoustic detection of sodium boiling is a promising technique to monitor subassembly fault in a last reactor. This paper summarises the programme for developing this detection system and describes the design of a high temperature transducer for boiling detection. It is appreciated that the background noise from primary pumps can interfere with this detection. Noise measurements were therefore carried out during water testing of the primary pump of the Fast Breeder Test Reactor. Some preliminary results of these measurements are presented.

  19. Development of a fast time-to-digital converter (TDC) using a programmable gate array

    International Nuclear Information System (INIS)

    Mine, Shun-ichi; Tokushuku, Katsuo; Yamada, Sakue.

    1994-09-01

    A fast time-to-digital converter with a 5 ns step was designed and tested by utilizing a user-programmable gate array. The stabilities against temperature and supply voltage variation were measured. A module was built with this TDC, and was successfully used in the first-level trigger system of the ZEUS detector to reject proton-beam induced background events. (author)

  20. Status of sodium boiling noise detection programme at reactor research centre, India

    International Nuclear Information System (INIS)

    Prabhakar, R.; Elumalai, G.

    1982-01-01

    Acoustic detection of sodium boiling is a promising technique to monitor subassembly fault in a last reactor. This paper summarises the programme for developing this detection system and describes the design of a high temperature transducer for boiling detection. It is appreciated that the background noise from primary pumps can interfere with this detection. Noise measurements were therefore carried out during water testing of the primary pump of the Fast Breeder Test Reactor. Some preliminary results of these measurements are presented

  1. HAI, a new airborne, absolute, twin dual-channel, multi-phase TDLAS-hygrometer: background, design, setup, and first flight data

    Science.gov (United States)

    Buchholz, Bernhard; Afchine, Armin; Klein, Alexander; Schiller, Cornelius; Krämer, Martina; Ebert, Volker

    2017-01-01

    The novel Hygrometer for Atmospheric Investigation (HAI) realizes a unique concept for simultaneous gas-phase and total (gas-phase + evaporated cloud particles) water measurements. It has been developed and successfully deployed for the first time on the German HALO research aircraft. This new instrument combines direct tunable diode laser absorption spectroscopy (dTDLAS) with a first-principle evaluation method to allow absolute water vapor measurements without any initial or repetitive sensor calibration using a reference gas or a reference humidity generator. HAI contains two completely independent dual-channel (closed-path, open-path) spectrometers, one at 1.4 and one at 2.6 µm, which together allow us to cover the entire atmospheric H2O range from 1 to 40 000 ppmv with a single instrument. Both spectrometers each comprise a separate, wavelength-individual extractive, closed-path cell for total water (ice and gas-phase) measurements. Additionally, both spectrometers couple light into a common open-path cell outside of the aircraft fuselage for a direct, sampling-free, and contactless determination of the gas-phase water content. This novel twin dual-channel setup allows for the first time multiple self-validation functions, in particular a reliable, direct, in-flight validation of the open-path channels. During the first field campaigns, the in-flight deviations between the independent and calibration-free channels (i.e., closed-path to closed-path and open-path to closed-path) were on average in the 2 % range. Further, the fully autonomous HAI hygrometer allows measurements up to 240 Hz with a minimal integration time of 1.4 ms. The best precision is achieved by the 1.4 µm closed-path cell at 3.8 Hz (0.18 ppmv) and by the 2.6 µm closed-path cell at 13 Hz (0.055 ppmv). The requirements, design, operation principle, and first in-flight performance of the hygrometer are described and discussed in this work.

  2. The Winfrith DSN programme

    International Nuclear Information System (INIS)

    Francescon, S.

    1963-05-01

    The programme, which is written in the Fortran language, solves the Carlson discrete S n approximation to the Boltzmann transport equation in cylindrical geometry. This report describes the input and output facilities of the WINFRITH DSN programme and the associated editing programme WED. (author)

  3. The Winfrith DSN programme

    Energy Technology Data Exchange (ETDEWEB)

    Francescon, S [General Reactor Physics Division, Atomic Energy Establishment, Winfrith, Dorchester, Dorset (United Kingdom)

    1963-05-15

    The programme, which is written in the Fortran language, solves the Carlson discrete S{sub n} approximation to the Boltzmann transport equation in cylindrical geometry. This report describes the input and output facilities of the WINFRITH DSN programme and the associated editing programme WED. (author)

  4. UNESCO's Ethics Education Programme.

    NARCIS (Netherlands)

    Have, H.A.M.J. ten

    2008-01-01

    Unesco initiated the Ethics Education Programme in 2004 at the request of member states to reinforce and increase the capacities in the area of ethics teaching. The programme is focused on providing detailed information about existing teaching programmes. It also develops and promotes teaching

  5. FPGAs for software programmers

    CERN Document Server

    Hannig, Frank; Ziener, Daniel

    2016-01-01

    This book makes powerful Field Programmable Gate Array (FPGA) and reconfigurable technology accessible to software engineers by covering different state-of-the-art high-level synthesis approaches (e.g., OpenCL and several C-to-gates compilers). It introduces FPGA technology, its programming model, and how various applications can be implemented on FPGAs without going through low-level hardware design phases. Readers will get a realistic sense for problems that are suited for FPGAs and how to implement them from a software designer’s point of view. The authors demonstrate that FPGAs and their programming model reflect the needs of stream processing problems much better than traditional CPU or GPU architectures, making them well-suited for a wide variety of systems, from embedded systems performing sensor processing to large setups for Big Data number crunching. This book serves as an invaluable tool for software designers and FPGA design engineers who are interested in high design productivity through behavi...

  6. EFFECTIVENESS OF MEDIAL TO LATERAL TAPING WITH EXERCISE PROGRAMME IN SUBJECTS WITH LATERAL EPICONDYLITIS

    Directory of Open Access Journals (Sweden)

    Bhavana Dattaram Desai

    2014-06-01

    Full Text Available Background: Medial to lateral tapping and exercise programme has been found to be effective in Lateral epicondylitis. The purpose to find the combined effect of Medial to lateral tapping with exercise programme for subjects with lateral epicondylitis on pain intensity and functional ability. Method: An experimental study design, selected 40 subjects with Lateral epicondylitis randomized 20 subjects each into Study and Control group. Control group received only exercise programme while study group received combined medial to lateral tapping with exercise programme thrice a week for 4 weeks. Pain intensity was measured using Visual analogue scale and functional ability was measured using Patient Rated Tennis Elbow Evaluation questionnaire before and after 4 weeks of treatment. Results: When the post-intervention means were compared between Study and Control group after 4 weeks of treatment found statistically significant difference in the improvement in outcomes measures in means of VAS and PRTEE before and after intervention within the groups. Conclusion: It is concluded that the Medial to lateral tapping with exercise programme is more effective than the exercise programme in reduction of pain and improve functional abilities for subjects with Lateral epicondylitis.

  7. CERN launches high-school internship programme

    Science.gov (United States)

    Johnston, Hamish

    2017-07-01

    The CERN particle-physics lab has hosted 22 high-school students from Hungary in a pilot programme designed to show teenagers how science, technology, engineering and mathematics is used at the particle-physics lab.

  8. ATLAS Upgrade Programme

    CERN Document Server

    Hillier, S J; The ATLAS collaboration

    2012-01-01

    With the already outstanding LHC luminosity performance, and planned LHC upgrades in the upcoming shutdowns, it is expected that within a short time-scale, the general purpose LHC experiments will have to cope with luminosities beyond their original design. In order to maintain detector performance and sensitivity to expected and new physics processes, ATLAS has defined a continuous upgrade programme which foresees staged enhancements during the next 10 years of operation, and then more widespread changes before the transition to the highest luminosities after 2022. This talk will describe several components of the ATLAS upgrade, focusing in particular on the Inner Detector and Trigger. The Inner Detector faces two challenges in the higher luminosity environment: high particle multiplicities and increased radiation dose. These will be addressed in the short term by a new layer of Pixel detectors, and in the long term by a complete replacement. The Trigger faces an increasingly difficult task of distinguishing...

  9. Berkeley Nuclear Laboratories Reactor Physics Mk. III Experimental Programme. Description of facility and programme for 1971

    Energy Technology Data Exchange (ETDEWEB)

    Nunn, R M; Waterson, R H; Young, J D

    1971-01-15

    Reactor physics experiments have been carried out at Berkeley Nuclear Laboratories during the past few years in support of the Civil Advanced Gas-Cooled Reactors (Mk. II) the Generating Board is building. These experiments are part of an overall programme whose objective is to assess the accuracy of the calculational methods used in the design and operation of these reactors. This report provides a description of the facility for the Mk. III experimental programme and the planned programme for 1971.

  10. Design Methodology of an Equalizer for Unipolar Non Return to Zero Binary Signals in the Presence of Additive White Gaussian Noise Using a Time Delay Neural Network on a Field Programmable Gate Array

    Science.gov (United States)

    Pérez Suárez, Santiago T.; Travieso González, Carlos M.; Alonso Hernández, Jesús B.

    2013-01-01

    This article presents a design methodology for designing an artificial neural network as an equalizer for a binary signal. Firstly, the system is modelled in floating point format using Matlab. Afterward, the design is described for a Field Programmable Gate Array (FPGA) using fixed point format. The FPGA design is based on the System Generator from Xilinx, which is a design tool over Simulink of Matlab. System Generator allows one to design in a fast and flexible way. It uses low level details of the circuits and the functionality of the system can be fully tested. System Generator can be used to check the architecture and to analyse the effect of the number of bits on the system performance. Finally the System Generator design is compiled for the Xilinx Integrated System Environment (ISE) and the system is described using a hardware description language. In ISE the circuits are managed with high level details and physical performances are obtained. In the Conclusions section, some modifications are proposed to improve the methodology and to ensure portability across FPGA manufacturers.

  11. Design Methodology of an Equalizer for Unipolar Non Return to Zero Binary Signals in the Presence of Additive White Gaussian Noise Using a Time Delay Neural Network on a Field Programmable Gate Array

    Directory of Open Access Journals (Sweden)

    Santiago T. Pérez Suárez

    2013-12-01

    Full Text Available This article presents a design methodology for designing an artificial neural network as an equalizer for a binary signal. Firstly, the system is modelled in floating point format using Matlab. Afterward, the design is described for a Field Programmable Gate Array (FPGA using fixed point format. The FPGA design is based on the System Generator from Xilinx, which is a design tool over Simulink of Matlab. System Generator allows one to design in a fast and flexible way. It uses low level details of the circuits and the functionality of the system can be fully tested. System Generator can be used to check the architecture and to analyse the effect of the number of bits on the system performance. Finally the System Generator design is compiled for the Xilinx Integrated System Environment (ISE and the system is described using a hardware description language. In ISE the circuits are managed with high level details and physical performances are obtained. In the Conclusions section, some modifications are proposed to improve the methodology and to ensure portability across FPGA manufacturers.

  12. Optimal background matching camouflage.

    Science.gov (United States)

    Michalis, Constantine; Scott-Samuel, Nicholas E; Gibson, David P; Cuthill, Innes C

    2017-07-12

    Background matching is the most familiar and widespread camouflage strategy: avoiding detection by having a similar colour and pattern to the background. Optimizing background matching is straightforward in a homogeneous environment, or when the habitat has very distinct sub-types and there is divergent selection leading to polymorphism. However, most backgrounds have continuous variation in colour and texture, so what is the best solution? Not all samples of the background are likely to be equally inconspicuous, and laboratory experiments on birds and humans support this view. Theory suggests that the most probable background sample (in the statistical sense), at the size of the prey, would, on average, be the most cryptic. We present an analysis, based on realistic assumptions about low-level vision, that estimates the distribution of background colours and visual textures, and predicts the best camouflage. We present data from a field experiment that tests and supports our predictions, using artificial moth-like targets under bird predation. Additionally, we present analogous data for humans, under tightly controlled viewing conditions, searching for targets on a computer screen. These data show that, in the absence of predator learning, the best single camouflage pattern for heterogeneous backgrounds is the most probable sample. © 2017 The Authors.

  13. Evaluation of physical activity programmes for elderly people - a descriptive study using the EFQM' criteria

    Directory of Open Access Journals (Sweden)

    Santos Rute

    2011-02-01

    Full Text Available Abstract Background In the past years, there has been a growing concern in designing physical activity (PA programmes for elderly people, because evidence suggests that such health promotion interventions may reduce the deleterious effects of the ageing process. Quality is an important issue when designing a PA programme for older people. Some studies support the Excellence Model of the European Foundation for Quality Management (EFQM as an operational framework for evaluating the quality of an organization. Within this context, the aim of this study was to characterize the quality management models of the PA programmes developed by Portuguese Local Administration to enhance quality of life for elderly people, according to the criteria of the EFQM Excellence Model. Methods A methodological triangulation was conducted in 26 PA programmes using questionnaire surveys, semi-structured interviews and document analysis. We used standard approaches to the statistical analysis of data including frequencies and percentages for the categorical data. Results Results showed that Processes (65,38%, Leadership (61,03%, Customer results (58,46 and People (51,28% had high percentage occurrences of quality practices. In contrast, Partnerships and resources (45,77%, People results (41,03%, Policy and strategy (37,91%, Key performance results (19,23% and Society results (19,23% had lower percentage occurrences. Conclusions Our findings suggest that although there are some good practices in PA programmes, there are still relevant areas that require improvement.

  14. The preventive effect of the bounding exercise programme on hamstring injuries in amateur soccer players : The design of a randomized controlled trial

    NARCIS (Netherlands)

    Van de Hoef, S.; Huisstede, B. M. A.; Brink, M. S.; de Vries, N.; Goedhart, E. A.; Backx, F. J. G.

    2017-01-01

    Background: Hamstring injuries are the most common muscle injury in amateur and professional soccer. Most hamstring injuries occur in the late swing phase, when the hamstring undergoes a stretch-shortening cycle and the hamstring does a significant amount of eccentric work. The incidence of these

  15. Development of loyalty programmes in the hotel industry

    OpenAIRE

    Laškarin, Marina

    2013-01-01

    Purpose – In the very beginning when loyalty programmes were being developed, hoteliers were mostly involved as partners of airline companies. However, once they realized the obvious numerous advantages that airlines were gaining, hoteliers began to design their own loyalty programmes. The idea of a loyalty programme is to strike a balance between what guests want and what is offered to them as a reward, and to find other programme partners whose services guests will also use. This paper will...

  16. NOVANA. National Monitering and Assessment Programme for the Aquatic and Terrestrial Environments

    DEFF Research Database (Denmark)

    Svendsen, L. M.; Bijl, L. van der; Boutrup, S.

    This report is Part 2 of the Programme Description of NOVANA - the National Monitoring and Assessment Programme for the Aquatic and Terrestrial Environments. Part 2 comprises a de-tailed description of the nine NOVANA subprogrammes: Background monitoring of air......This report is Part 2 of the Programme Description of NOVANA - the National Monitoring and Assessment Programme for the Aquatic and Terrestrial Environments. Part 2 comprises a de-tailed description of the nine NOVANA subprogrammes: Background monitoring of air...

  17. Cosmic microwave background radiation

    International Nuclear Information System (INIS)

    Wilson, R.W.

    1979-01-01

    The 20-ft horn-reflector antenna at Bell Laboratories is discussed in detail with emphasis on the 7.35 cm radiometer. The circumstances leading to the detection of the cosmic microwave background radiation are explored

  18. IPSN's experimental programmes on fires

    International Nuclear Information System (INIS)

    1999-01-01

    Every year fires occur in nuclear installations as they do in any industrial facility. They feed on cables, electrical equipment cabinets, oils, solvents..., they might lead to the degradation of the safety standard of the installation or they might threaten the confinement of radioactive materials. In this document IPSN presents its experimental programmes and its facilities in Saclay and Cadarache designed to study the triggering and the propagation of fires and flames in closed and ventilated premises. (A.C.)

  19. Zambia Country Background Report

    DEFF Research Database (Denmark)

    Hampwaye, Godfrey; Jeppesen, Søren; Kragelund, Peter

    This paper provides background data and general information for the Zambia studies focusing on local food processing sub­‐sector; and the local suppliers to the mines as part of the SAFIC project (Successful African Firms and Institutional Change).......This paper provides background data and general information for the Zambia studies focusing on local food processing sub­‐sector; and the local suppliers to the mines as part of the SAFIC project (Successful African Firms and Institutional Change)....

  20. Restoring integrity—A grounded theory of coping with a fast track surgery programme

    Directory of Open Access Journals (Sweden)

    Lene Bastrup Jørgensen

    2016-01-01

    Full Text Available Aims and objectives: The aim of this study was to generate a theory conceptualizing and explaining behavioural processes involved in coping in order to identify the predominant coping types and coping type-specific features. Background: Patients undergoing fast track procedures do not experience a higher risk of complications, readmission, or mortality. However, such programmes presuppose an increasing degree of patient involvement, placing high educational, physical, and mental demands on the patients. There is a lack of knowledge about how patients understand and cope with fast track programmes. Design: The study design used classical grounded theory. Methods: The study used a multimodal approach with qualitative and quantitative data sets from 14 patients. Results: Four predominant types of coping, with distinct physiological, cognitive, affective, and psychosocial features, existed among patients going through a fast track total hip replacement programme. These patients’ main concern was to restore their physical and psychosocial integrity, which had been compromised by reduced function and mobility in daily life. To restore integrity they economized their mental resources, while striving to fulfil the expectations of the fast track programme. This goal was achieved by being mentally proactive and physically active. Three out of the four predominant types of coping matched the expectations expressed in the fast track programme. The non-matching behaviour was seen among the most nervous patients, who claimed the right to diverge from the programme. Conclusion: In theory, four predominant types of coping with distinct physiological, cognitive, affective, and psychosocial features occur among patients going through a fast track total hip arthroplasty programme.

  1. Restoring integrity—A grounded theory of coping with a fast track surgery programme

    Science.gov (United States)

    Jørgensen, Lene Bastrup; Fridlund, Bengt

    2016-01-01

    Aims and objectives The aim of this study was to generate a theory conceptualizing and explaining behavioural processes involved in coping in order to identify the predominant coping types and coping type-specific features. Background Patients undergoing fast track procedures do not experience a higher risk of complications, readmission, or mortality. However, such programmes presuppose an increasing degree of patient involvement, placing high educational, physical, and mental demands on the patients. There is a lack of knowledge about how patients understand and cope with fast track programmes. Design The study design used classical grounded theory. Methods The study used a multimodal approach with qualitative and quantitative data sets from 14 patients. Results Four predominant types of coping, with distinct physiological, cognitive, affective, and psychosocial features, existed among patients going through a fast track total hip replacement programme. These patients’ main concern was to restore their physical and psychosocial integrity, which had been compromised by reduced function and mobility in daily life. To restore integrity they economized their mental resources, while striving to fulfil the expectations of the fast track programme. This goal was achieved by being mentally proactive and physically active. Three out of the four predominant types of coping matched the expectations expressed in the fast track programme. The non-matching behaviour was seen among the most nervous patients, who claimed the right to diverge from the programme. Conclusion In theory, four predominant types of coping with distinct physiological, cognitive, affective, and psychosocial features occur among patients going through a fast track total hip arthroplasty programme. PMID:26751199

  2. The IAEA Accident Management Programme

    International Nuclear Information System (INIS)

    Kabanov, L.; Jankowski, M.; Mauersberger, H.

    1993-01-01

    Accident prevention and mitigation programmes and the Emergency Response System (ERS) are important elements of the Agency's activities in the area of nuclear power plant (NPP) safety. Safety Codes and Guides on siting, design, quality assurance and the operation of NPPs have been produced and are used by NPP operating organizations. Nuclear safety evaluation services are provided by the IAEA. The Emergency Response System and the International Nuclear Event Scale (INES) have been developed. The framework for the development of an accident management programme has been set up. The main goal is to develop an Accident Management Manual to provide a systematic, structured approach to the development and implementation of an accident management programme at NPPs. An outline of the Manual has been distributed and the first draft is available. The component parts are: Co-ordinated research programmes (CRPs) on severe accident management and containment behaviour; the use of vulnerability analysis; mitigation of the effects of hydrogen, and generic symptom oriented emergency operating procedures. The IAEA provides guidance by the dissemination of information on methods for accident management; collates information on approaches in this field in different organizations and countries; and arranges exchange of experience and the promulgation of knowledge through the training of NPP managers and senior technical staff. (orig.)

  3. The IAEA Accident Management Programme

    Energy Technology Data Exchange (ETDEWEB)

    Kabanov, L.; Jankowski, M.; Mauersberger, H. (International Atomic Energy Agency, Vienna (Austria))

    1993-02-01

    Accident prevention and mitigation programmes and the Emergency Response System (ERS) are important elements of the Agency's activities in the area of nuclear power plant (NPP) safety. Safety Codes and Guides on siting, design, quality assurance and the operation of NPPs have been produced and are used by NPP operating organizations. Nuclear safety evaluation services are provided by the IAEA. The Emergency Response System and the International Nuclear Event Scale (INES) have been developed. The framework for the development of an accident management programme has been set up. The main goal is to develop an Accident Management Manual to provide a systematic, structured approach to the development and implementation of an accident management programme at NPPs. An outline of the Manual has been distributed and the first draft is available. The component parts are: Co-ordinated research programmes (CRPs) on severe accident management and containment behaviour; the use of vulnerability analysis; mitigation of the effects of hydrogen, and generic symptom oriented emergency operating procedures. The IAEA provides guidance by the dissemination of information on methods for accident management; collates information on approaches in this field in different organizations and countries; and arranges exchange of experience and the promulgation of knowledge through the training of NPP managers and senior technical staff. (orig.).

  4. The development, implementation and testing of a lameness control programme based on HACCP principles and designed for heifers on dairy farms.

    Science.gov (United States)

    Bell, N J; Bell, M J; Knowles, T G; Whay, H R; Main, D J; Webster, A J F

    2009-05-01

    This paper describes the development and testing of a lameness control programme (LCP) for heifers on dairy farms. The LCP, which is based on the analysis of hazards and critical control points (HACCP), was tested via a randomised intervention study on 60 farms. Tangible hazards for each farm were identified, allotted to 11 categories of proximate hazard and scored on each farm to quantify the risks presented by each hazard. Feet were inspected for signs of claw horn disease and infection, such as digital dermatitis. Intervention was generally ineffective, primarily through failure to implement the LCP. However, retrospective analysis was able to demonstrate highly significant associations between risks attached to proximate hazards and probabilities of lameness and foot lesions, allowing the severity of these hazards to be ranked. The most significant proximate hazards of environmental origin were prolonged standing on concrete, standing in wet slurry and factors that cause claw trauma. The most severe proximate hazards however were those associated with failures of management, especially poor claw condition and inadequate foot care. Overall farm risks (OFR) were estimated by summing the products of the generic severity for proximate hazards with on-farm risks. Changes in OFR were significantly related to changes in outcome (lameness and lesions).

  5. A web-based programme for person-centred learning and support designed for preschool children with long-term illness: a pilot study of a new intervention.

    Science.gov (United States)

    Hellström, Anna-Lena; Simeonsdotter Svensson, Agneta; Pramling Samuelsson, Ingrid; Jenholt Nolbris, Margaretha

    2012-01-01

    For children living with long-term illness, school age is a risk period with regard to psychosocial ill health and poor compliance with treatment. There is a need for methods to promote health, well-being, and self-esteem. This study describes a new concept for supporting children, person-centred web-based learning and support, which has been tested in 12 preschool children and incorporates learning about feelings, relationships, and the right to integrity. SKYPE was used for conversations between the child and the web teacher. Methods. The programme was developed and tested in two steps. The conversations were tape-recorded and analysed using phenomenography. The questions addressed concerned the quality of the intervention process: accessibility of intervention, learning content and support, and identification of measurable items and patterns. Findings. The children found it interesting to communicate with their web teacher using SKYPE. The story about Max and Sara served as a good basis for discussion, and development was found in the learning process. The children were able to talk about relations and feelings and developed an understanding for use in new situations in their daily lives. Items and patterns that are useful for research and documentation were identified, for example, well-being, resources, needs, and wishes.

  6. Finnish bioenergy research programme

    Energy Technology Data Exchange (ETDEWEB)

    Asplund, D. [VTT Energy, Jyvaeskylae (Finland)

    1996-12-31

    Finland is a leading country in the use of biofuels and has excellent opportunities to increase the use of biofuels by up to 25-30 %. The Finnish Government has set an objective for the promotion of bioenergy. The aim is to increase the use of bioenergy by about 25 % from the present level by 2005, and the increment corresponds to 1.5 million tonnes of oil equivalent (toe) per year. The R and D work has been considered as an important factor to achieve this ambitious goal. Energy research was organised into a series of research programmes in 1988 in accordance with the proposal of Finnish Energy Research Committee. The object of the research programmes is to enhance research activities and to bundle individual projects together into larger research packages. The common target of the Finnish energy research programmes is to proceed from basic and applied research to product development and pilot operation, and after that to the first commercial applications, e.g. demonstrations. As the organisation of energy research to programmes has led to good results, the Finnish Ministry of Trade and Industry decided to go on with this practice by launching new six-year programmes in 1993-1998. One of these programmes is the Bioenergy Research Programme and the co-ordination of this programme is carried out by VTT Energy. Besides VTT Energy the Finnish Forest Research Institute, Work Efficiency Institute, Metsaeteho and University of Joensuu are participating in the programme 7 refs.

  7. Finnish bioenergy research programme

    Energy Technology Data Exchange (ETDEWEB)

    Asplund, D [VTT Energy, Jyvaeskylae (Finland)

    1997-12-31

    Finland is a leading country in the use of biofuels and has excellent opportunities to increase the use of biofuels by up to 25-30 %. The Finnish Government has set an objective for the promotion of bioenergy. The aim is to increase the use of bioenergy by about 25 % from the present level by 2005, and the increment corresponds to 1.5 million tonnes of oil equivalent (toe) per year. The R and D work has been considered as an important factor to achieve this ambitious goal. Energy research was organised into a series of research programmes in 1988 in accordance with the proposal of Finnish Energy Research Committee. The object of the research programmes is to enhance research activities and to bundle individual projects together into larger research packages. The common target of the Finnish energy research programmes is to proceed from basic and applied research to product development and pilot operation, and after that to the first commercial applications, e.g. demonstrations. As the organisation of energy research to programmes has led to good results, the Finnish Ministry of Trade and Industry decided to go on with this practice by launching new six-year programmes in 1993-1998. One of these programmes is the Bioenergy Research Programme and the co-ordination of this programme is carried out by VTT Energy. Besides VTT Energy the Finnish Forest Research Institute, Work Efficiency Institute, Metsaeteho and University of Joensuu are participating in the programme 7 refs.

  8. The challenge of electronic health records (EHRs) design and implementation: responses of health workers to drawing a 'big and rich picture' of a future EHR programme using animated tools.

    Science.gov (United States)

    Jenkings, K Neil; Wilson, Robert G

    2007-01-01

    To investigate the use of animation tools to aid visualisation of problems for discussion within focus groups, in the context of healthcare workers discussing electronic health records (EHRs). Ten healthcare staff focus groups, held in a range of organisational contexts. Each focus group was in four stages: baseline discussion, animator presentation, post-animator discussion and questionnaire. Audio recordings of the focus groups were transcribed and coded and the emergent analytic themes analysed for issues relating to EHR design and implementation. The data allowed a comparison of baseline and post-animator discussion. The animator facilitated discussion about EHR issues and these were thematically coded as: Workload; Sharing Information; Access to Information; Record Content; Confidentiality; Patient Consent; and Implementation. We illustrate that use of the animator in focus groups is one means to raise understanding about a proposed EHR development. The animator provided a visual 'probe' to support a more proactive and discursive localised approach to end-user concerns, which could be part of an effective stakeholder engagement and communication strategy crucial in any EHR or health informatics implementation programme. The results of the focus groups were to raise salient issues and concerns, many of which anticipated those that have emerged in the current NHS Connecting for Health Care Records programme in England. Potentially, animator-type technologies may facilitate the user ownership which other forms of dissemination appear to be failing to achieve.

  9. Japanese contributions to IAEA INTOR workshop, phase two A, part 2, chapter XI: concept evolution, chapter XII: design concept, and chapter XIII: operation and test programme

    International Nuclear Information System (INIS)

    Tomabechi, Ken; Fujisawa, Noboru; Iida, Hiromasa

    1985-07-01

    This report corresponds to Chapters XI, XII, and XIII of Japanese contribution report to IAEA INTOR Workship, Phase Two A, Part 2. In the phase Two A, Part 2 workshop, we have studied critical technical issues and have also assessed scientific and technical data bases. Based on those results, the INTOR design have been modified to upgrade the design concept. The major modification items are related to plasma beta value, plasma operation scenario, reactor size reduction, neutron fluence, tritium producing blanket, and implementation of active control coils. In those chapters, the concept evolution for the design modification and main results are described. (author)

  10. Incredible Years Parent and Teacher Programmes: Emerging Themes and Issues

    Science.gov (United States)

    Wetherall, Michelle

    2014-01-01

    This paper examines the Incredible Years Parent and Teacher Programmes that have originated from the work of Webster-Stratton. It provides a brief background on the programmes and a critical analysis of the issues as identified in current literature. The issues can be grouped into four main categories, the first being government decision-making…

  11. All-Girls Adventure Programmes: What Are the Benefits?

    Science.gov (United States)

    Whittington, Anja; Mack, Erica Nixon; Budbill, Nadine W.; McKenney, Priscilla

    2011-01-01

    This study examined the benefits of all-girls adventure programmes from the perspective of adolescent girls. Participants included 361 girls aged 10-17 years from diverse ethnic and socio-economic backgrounds who completed a variety of adventure programmes. Adventure activities included rock climbing, sea kayaking, mountaineering, backpacking,…

  12. The mass miniature chest radiography programme in Cape Town ...

    African Journals Online (AJOL)

    Background. Tuberculosis (TB) control programmes rely mainly on passive detection of symptomatic individuals. The resurgence of TB has rekindled interest in active case finding. Cape Town (South Africa) had a mass miniature radiography (MMR) screening programme from 1948 to 1994. Objective. To evaluate screening ...

  13. The natural radiation background

    International Nuclear Information System (INIS)

    Duggleby, J.C.

    1982-01-01

    The components of the natural background radiation and their variations are described. Cosmic radiation is a major contributor to the external dose to the human body whilst naturally-occurring radionuclides of primordial and cosmogenic origin contribute to both the external and internal doses, with the primordial radionuclides being the major contributor in both cases. Man has continually modified the radiation dose to which he has been subjected. The two traditional methods of measuring background radiation, ionisation chamber measurements and scintillation counting, are looked at and the prospect of using thermoluminescent dosimetry is considered

  14. Effects of background radiation

    International Nuclear Information System (INIS)

    Knox, E.G.; Stewart, A.M.; Gilman, E.A.; Kneale, G.W.

    1987-01-01

    The primary objective of this investigation is to measure the relationship between exposure to different levels of background gamma radiation in different parts of the country, and different Relative Risks for leukaemias and cancers in children. The investigation is linked to an earlier analysis of the effects of prenatal medical x-rays upon leukaemia and cancer risk; the prior hypothesis on which the background-study was based, is derived from the earlier results. In a third analysis, the authors attempted to measure varying potency of medical x-rays delivered at different stages of gestation and the results supply a link between the other two estimates. (author)

  15. The cosmic microwave background

    International Nuclear Information System (INIS)

    Silk, J.

    1991-01-01

    Recent limits on spectral distortions and angular anisotropies in the cosmic microwave background are reviewed. The various backgrounds are described, and the theoretical implications are assessed. Constraints on inflationary cosmology dominated by cold dark matter (CDM) and on open cosmological models dominated by baryonic dark matter (BDM), with, respectively, primordial random phase scale-invariant curvature fluctuations or non-gaussian isocurvature fluctuations are described. More exotic theories are addressed, and I conclude with the 'bottom line': what theories expect experimentalists to be measuring within the next two to three years without having to abandon their most cherished theorists. (orig.)

  16. The Cosmic Background Explorer

    Science.gov (United States)

    Gulkis, Samuel; Lubin, Philip M.; Meyer, Stephan S.; Silverberg, Robert F.

    1990-01-01

    The Cosmic Background Explorer (CBE), NASA's cosmological satellite which will observe a radiative relic of the big bang, is discussed. The major questions connected to the big bang theory which may be clarified using the CBE are reviewed. The satellite instruments and experiments are described, including the Differential Microwave Radiometer, which measures the difference between microwave radiation emitted from two points on the sky, the Far-Infrared Absolute Spectrophotometer, which compares the spectrum of radiation from the sky at wavelengths from 100 microns to one cm with that from an internal blackbody, and the Diffuse Infrared Background Experiment, which searches for the radiation from the earliest generation of stars.

  17. Design status and future research programme for a sub-critical assembly driven by a proton accelerator with proton energy 660 MeV for experiments on long-lived fission products and minor actinides transmutation (Sad)

    International Nuclear Information System (INIS)

    Gustov, S.A.; Mirokhin, I.V.; Morozov, N.A.; Onischenko, L.M.; Savchenko, O.V.; Sissakian, A.N.; Shvetsov, V.N.; Tretyakov, I.T.; Lopatkin, A.V.; Vorontsov, M.T.

    2003-01-01

    Report presents project for the construction of a low power integral system on the basis of the proton accelerator of energy 660 MeV and sub-critical MOX blanket with uranium-plutonium fuel. Installation includes sub-critical core with a nominal thermal power of 15-20 kW. Multiplication coefficient k eff = 0,95 and the accelerator beam power of 0.75-1 kW. The experimental programme for SAD will be focused on solving different aspects of reactor physics, reaction rates measurements and benchmarking. The first conceptual design of the SAD experiment is completed in the form of the ISTC Project Proposal 2267. Realisation of the SAD facility may be expected in about 3-4 years. (author)

  18. A pilot study evaluating a support programme for parents of young people with suicidal behaviour

    Directory of Open Access Journals (Sweden)

    Crowley Sinead

    2009-07-01

    Full Text Available Abstract Background Deliberate self harm (DSH is a major public health concern and has increased among young people in Ireland. While DSH is undoubtedly the result of interacting factors, studies have identified an association between DSH and family dysfunction as well as the protective role of positive family relationships. Following a focus group meeting held to identify the needs of parents and carers of young people with DSH, a support programme (SPACE was developed. The aims of the current study are to evaluate the effectiveness of the SPACE programme in decreasing parental psychological distress, reducing parental report of young peoples' difficulties, increasing parental satisfaction and increasing parents' ratings of their own defined challenges and goals. Methods Participants were recruited from a Mental Health Service within a paediatric hospital, Community Child and Adolescent Mental Health Teams and family support services. All services were located within the greater Dublin area in Ireland. Forty-six parents of children who had engaged in or expressed thoughts of self harm attended the programme and participated in the evaluation study. The programme ran once a week over an 8-week period and included topics such as information on self harm in young people, parenting adolescents, communication and parental self-care. Seventy percent (N = 32 of the original sample at Time 1 completed measures at Time 2 (directly following the programme and 37% (N = 17 of the original sample at Time 1 completed them at Time 3 (6 months following the programme. A repeated measures design was used to identify changes in parental wellbeing after attendance at the programme as well as changes in parental reports of their children's difficulties. Results Participants had lower levels of psychological distress, increased parental satisfaction, lower ratings of their own defined challenges and higher ratings of their goals directly after the programme. These

  19. A pilot study evaluating a support programme for parents of young people with suicidal behaviour.

    LENUS (Irish Health Repository)

    Power, Lorna

    2009-01-01

    ABSTRACT: BACKGROUND: Deliberate self harm (DSH) is a major public health concern and has increased among young people in Ireland. While DSH is undoubtedly the result of interacting factors, studies have identified an association between DSH and family dysfunction as well as the protective role of positive family relationships. Following a focus group meeting held to identify the needs of parents and carers of young people with DSH, a support programme (SPACE) was developed. The aims of the current study are to evaluate the effectiveness of the SPACE programme in decreasing parental psychological distress, reducing parental report of young peoples\\' difficulties, increasing parental satisfaction and increasing parents\\' ratings of their own defined challenges and goals. METHODS: Participants were recruited from a Mental Health Service within a paediatric hospital, Community Child and Adolescent Mental Health Teams and family support services. All services were located within the greater Dublin area in Ireland. Forty-six parents of children who had engaged in or expressed thoughts of self harm attended the programme and participated in the evaluation study. The programme ran once a week over an 8-week period and included topics such as information on self harm in young people, parenting adolescents, communication and parental self-care. Seventy percent (N = 32) of the original sample at Time 1 completed measures at Time 2 (directly following the programme) and 37% (N = 17) of the original sample at Time 1 completed them at Time 3 (6 months following the programme).A repeated measures design was used to identify changes in parental wellbeing after attendance at the programme as well as changes in parental reports of their children\\'s difficulties. RESULTS: Participants had lower levels of psychological distress, increased parental satisfaction, lower ratings of their own defined challenges and higher ratings of their goals directly after the programme. These

  20. 基于AU6850C芯片的智能家居背景音乐播放模块的设计%Design of intelligent Home Furnishing background music playing module based on AU6850C chip

    Institute of Scientific and Technical Information of China (English)

    蔡建聪

    2015-01-01

    This paper introduces the design of hardware and software of intelligent Home Furnishing background music to STC12C5A60S2 decoding chip and MP3 AU6850C as the core of the playing module.This module provides USB and SD card interface, with liquid crystal display,serial communication and power-off memory function,intelligent Home Furnishing control board can realize the background music playing through the control of the music playing module.%本文介绍了以STC12C5A60S2单片机和MP3解码芯片AU6850C为核心的智能家居背景音乐播放模块的硬件及软件设计。该模块提供了USB和SD卡的接口,具有液晶显示、串口通讯及断电记忆功能,智能家居控制板可通过对音乐播放模块的控制实现背景音乐的播放。

  1. Methods for economic evaluation of a factorial-design cluster randomised controlled trial of a nutrition supplement and an exercise programme among healthy older people living in Santiago, Chile: the CENEX study.

    Science.gov (United States)

    Walker, Damian G; Aedo, Cristian; Albala, Cecilia; Allen, Elizabeth; Dangour, Alan D; Elbourne, Diana; Grundy, Emily; Uauy, Ricardo

    2009-05-27

    In an effort to promote healthy ageing and preserve health and function, the government of Chile has formulated a package of actions into the Programme for Complementary Food in Older People (Programa de Alimentación Complementaria para el Adulto Mayor - PACAM). The CENEX study was designed to evaluate the impact, cost and cost-effectiveness of the PACAM and a specially designed exercise programme on pneumonia incidence, walking capacity and body mass index in healthy older people living in low- to medium-socio-economic status areas of Santiago. The purpose of this paper is to describe in detail the methods that will be used to estimate the incremental costs and cost-effectiveness of the interventions. The base-case analysis will adopt a societal perspective, including the direct medical and non-medical costs borne by the government and patients. The cost of the interventions will be calculated by the ingredients approach, in which the total quantities of goods and services actually employed in applying the interventions will be estimated, and multiplied by their respective unit prices. Relevant information on costs of interventions will be obtained mainly from administrative records. The costs borne by patients will be collected via exit and telephone interviews. An annual discount rate of 8% will be used, consistent with the rate recommended by the Government of Chile. All costs will be converted from Chilean Peso to US dollars with the 2007 average period exchange rate of US$1 = 522.37 Chilean Peso. To test the robustness of model results, we will vary the assumptions over a plausible range in sensitivity analyses. The protocol described here indicates our intent to conduct an economic evaluation alongside the CENEX study. It provides a detailed and transparent statement of planned data collection methods and analyses. ISRCTN48153354.

  2. Thermal background noise limitations

    Science.gov (United States)

    Gulkis, S.

    1982-01-01

    Modern detection systems are increasingly limited in sensitivity by the background thermal photons which enter the receiving system. Expressions for the fluctuations of detected thermal radiation are derived. Incoherent and heterodyne detection processes are considered. References to the subject of photon detection statistics are given.

  3. Berkeley Low Background Facility

    International Nuclear Information System (INIS)

    Thomas, K. J.; Norman, E. B.; Smith, A. R.; Poon, A. W. P.; Chan, Y. D.; Lesko, K. T.

    2015-01-01

    The Berkeley Low Background Facility (BLBF) at Lawrence Berkeley National Laboratory (LBNL) in Berkeley, California provides low background gamma spectroscopy services to a wide array of experiments and projects. The analysis of samples takes place within two unique facilities; locally within a carefully-constructed, low background laboratory on the surface at LBNL and at the Sanford Underground Research Facility (SURF) in Lead, SD. These facilities provide a variety of gamma spectroscopy services to low background experiments primarily in the form of passive material screening for primordial radioisotopes (U, Th, K) or common cosmogenic/anthropogenic products; active screening via neutron activation analysis for U,Th, and K as well as a variety of stable isotopes; and neutron flux/beam characterization measurements through the use of monitors. A general overview of the facilities, services, and sensitivities will be presented. Recent activities and upgrades will also be described including an overview of the recently installed counting system at SURF (recently relocated from Oroville, CA in 2014), the installation of a second underground counting station at SURF in 2015, and future plans. The BLBF is open to any users for counting services or collaboration on a wide variety of experiments and projects

  4. The effectiveness of Stepping stones Triple P: the design of a randomised controlled trial on a parenting programme regarding children with mild intellectual disability and psychosocial problems versus care as usual

    OpenAIRE

    Kleefman, Marijke; Jansen, Daniëlle EMC; Reijneveld, Sijmen A

    2011-01-01

    Abstract Background Children with an intellectual disability are at increased risk of psychosocial problems. This leads to serious restrictions in the daily functioning of the children and to parental stress. Stepping Stones Triple P aims to prevent severe behavioural, emotional and developmental problems in children with a (intellectual) disability by enhancing parenting knowledge and skills, and the self-confidence of parents. This paper aims to describe the design of a study of the effecti...

  5. Design improvements and R and D achievements for VV and in-vessel components towards ITER construction and implications for the R and D programme

    International Nuclear Information System (INIS)

    Ioki, K.

    2002-01-01

    Procurement specifications are now being finalised for ITER components whose construction is lengthy, yet which are needed early, such as the vacuum vessel. Although the basic concept of the vacuum vessel (VV) and in-vessel components of the ITER design has stayed the same as reported at the last conference, there have been several detailed design improvements resulting from efforts to raise reliability, to improve better maintainability and to save money. One of the most important achievements in the VV R and D is demonstration of the necessary assembly tolerances. Further development of advanced methods of cutting, welding and NDT for the VV have been continued in order to refine manufacturing and improve cost and technical performance. With regard to the related FW/blanket and divertor designs, the R and D has resulted in the development of suitable technologies. Prototypes of the FW panel, the blanket shield block and the divertor components have been successfully fabricated. This paper reviews the recent progress in the design as procurement nears. (author)

  6. The Management of innovation: Lessons from a Danish Development Programme

    DEFF Research Database (Denmark)

    Clausen, Lennie

    1997-01-01

    The paper reports from an ongoing Danish development programme entitled "Process and Product Development in the Building Industry". The programme is a joint initiatvie, initiated by the Ministry of Housing and Building and the Ministry of Busines and Industry. In a competition in 1994 four...... consortia representing actors of the whole value chain were chosen to carry out innovation projects during a 4-year period, including experimental building projects. The paper describes the programme with respect to its background and organisation, the basic development ideas of the four consortia...... in the consortia.Keywords: R&D programme, innovation, experimental building projects, consortia....

  7. Design and Baseline Findings of a Multi-site Non-randomized Evaluation of the Effect of a Health Programme on Microfinance Clients in India

    OpenAIRE

    Saha, Somen

    2013-01-01

    Microfinance is the provision of financial services for the poor. Health program through microfinance has the potential to address several access barriers to health. We report the design and baseline findings of a multi-site non-randomized evaluation of the effect of a health program on the members of two microfinance organizations from Karnataka and Gujarat states of India. Villages identified for roll-out of health services with microfinance were pair-matched with microfinance only villages...

  8. The Cosmic Microwave Background

    Directory of Open Access Journals (Sweden)

    Jones Aled

    1998-01-01

    Full Text Available We present a brief review of current theory and observations of the cosmic microwave background (CMB. New predictions for cosmological defect theories and an overview of the inflationary theory are discussed. Recent results from various observations of the anisotropies of the microwave background are described and a summary of the proposed experiments is presented. A new analysis technique based on Bayesian statistics that can be used to reconstruct the underlying sky fluctuations is summarised. Current CMB data is used to set some preliminary constraints on the values of fundamental cosmological parameters $Omega$ and $H_circ$ using the maximum likelihood technique. In addition, secondary anisotropies due to the Sunyaev-Zel'dovich effect are described.

  9. RDandD Programme 2007. Programme for research, development and demonstration of methods for the management and disposal of nuclear waste

    International Nuclear Information System (INIS)

    2007-09-01

    The programme describes in general terms the planned measures and the facilities that are needed for the task, with a focus on the plans for the period 2008-2013. The period of immediate concern is 2008-2010. The level of detail for the three subsequent years is naturally lower. The programme provides a basis for designing systems to manage and dispose of the radioactive waste from the nuclear power plants. SKB intends to dispose of the spent nuclear fuel in accordance with the KBS-3 method. In the RDandD Programme we describe our activities and the planning for it. We also deal with societal research and other methods for disposal of spent nuclear fuel. The planning for low- and intermediate-level waste, as well as for the societal research, is presented in separate parts. The upcoming review of the programme can contribute valuable outside viewpoints. The regulatory authorities and the Government can clarify how they view different parts of the activity. Municipalities and other stakeholders can, after studying the programme, offer their viewpoints to SKB, the regulatory authorities or the Government. The most important milestone during the coming three-year period is to submit applications under the Nuclear Activities Act for the final repository for spent nuclear fuel and under the Environmental Code for the final repository system. RDandD programme 2007 therefore focuses on the technology development that is needed to realize the final repository for spent nuclear fuel. The site investigations in Forsmark and Laxemar will be concluded in 2007. The work of compiling the applications for the final repository is under way. In contrast to the immediately preceding programmes, RDandD Programme 2007 therefore also contains a summary of the site investigation phase and a look ahead at the steps that remain before the final repository can be put into operation. RDandD Programme 2007 consists of six parts: Part I SKB's plan of action; Part II Final repository for spent

  10. RDandD Programme 2007. Programme for research, development and demonstration of methods for the management and disposal of nuclear waste

    Energy Technology Data Exchange (ETDEWEB)

    2007-09-15

    The programme describes in general terms the planned measures and the facilities that are needed for the task, with a focus on the plans for the period 2008-2013. The period of immediate concern is 2008-2010. The level of detail for the three subsequent years is naturally lower. The programme provides a basis for designing systems to manage and dispose of the radioactive waste from the nuclear power plants. SKB intends to dispose of the spent nuclear fuel in accordance with the KBS-3 method. In the RDandD Programme we describe our activities and the planning for it. We also deal with societal research and other methods for disposal of spent nuclear fuel. The planning for low- and intermediate-level waste, as well as for the societal research, is presented in separate parts. The upcoming review of the programme can contribute valuable outside viewpoints. The regulatory authorities and the Government can clarify how they view different parts of the activity. Municipalities and other stakeholders can, after studying the programme, offer their viewpoints to SKB, the regulatory authorities or the Government. The most important milestone during the coming three-year period is to submit applications under the Nuclear Activities Act for the final repository for spent nuclear fuel and under the Environmental Code for the final repository system. RDandD programme 2007 therefore focuses on the technology development that is needed to realize the final repository for spent nuclear fuel. The site investigations in Forsmark and Laxemar will be concluded in 2007. The work of compiling the applications for the final repository is under way. In contrast to the immediately preceding programmes, RDandD Programme 2007 therefore also contains a summary of the site investigation phase and a look ahead at the steps that remain before the final repository can be put into operation. RDandD Programme 2007 consists of six parts: Part I SKB's plan of action; Part II Final repository for spent

  11. RDandD Programme 2007. Programme for research, development and demonstration of methods for the management and disposal of nuclear waste

    Energy Technology Data Exchange (ETDEWEB)

    2007-09-15

    The programme describes in general terms the planned measures and the facilities that are needed for the task, with a focus on the plans for the period 2008-2013. The period of immediate concern is 2008-2010. The level of detail for the three subsequent years is naturally lower. The programme provides a basis for designing systems to manage and dispose of the radioactive waste from the nuclear power plants. SKB intends to dispose of the spent nuclear fuel in accordance with the KBS-3 method. In the RDandD Programme we describe our activities and the planning for it. We also deal with societal research and other methods for disposal of spent nuclear fuel. The planning for low- and intermediate-level waste, as well as for the societal research, is presented in separate parts. The upcoming review of the programme can contribute valuable outside viewpoints. The regulatory authorities and the Government can clarify how they view different parts of the activity. Municipalities and other stakeholders can, after studying the programme, offer their viewpoints to SKB, the regulatory authorities or the Government. The most important milestone during the coming three-year period is to submit applications under the Nuclear Activities Act for the final repository for spent nuclear fuel and under the Environmental Code for the final repository system. RDandD programme 2007 therefore focuses on the technology development that is needed to realize the final repository for spent nuclear fuel. The site investigations in Forsmark and Laxemar will be concluded in 2007. The work of compiling the applications for the final repository is under way. In contrast to the immediately preceding programmes, RDandD Programme 2007 therefore also contains a summary of the site investigation phase and a look ahead at the steps that remain before the final repository can be put into operation. RDandD Programme 2007 consists of six parts: Part I SKB's plan of action; Part II Final repository for

  12. A programme of research to set priorities and reduce uncertainties for the prevention and treatment of skin disease

    OpenAIRE

    Thomas, K. S.; Batchelor, J. M.; Bath-Hextall, F.; Chalmers, J. R.; Clarke, T.; Crowe, S.; Delamere, F. M.; Eleftheriadou, V.; Evans, N.; Firkins, L.; Greenlaw, N.; Lansbury, L.; Lawton, S.; Layfield, C.; Leonardi-Bee, J.

    2016-01-01

    BACKGROUND: Skin diseases are very common and can have a large impact on the quality of life of patients and caregivers. This programme addressed four diseases: (1) eczema, (2) vitiligo, (3) squamous cell skin cancer (SCC) and (4) pyoderma gangrenosum (PG). OBJECTIVE: To set priorities and reduce uncertainties for the treatment and prevention of skin disease in our four chosen diseases. DESIGN: Mixed methods including eight systematic reviews, three prioritisation exercises, tw...

  13. Improving capacity in ethnicity and health research: report of a tailored programme for NHS Public Health practitioners

    OpenAIRE

    Salway, Sarah; Piercy, Hilary; Chowbey, Punita; Brewins, Louise; Dhoot, Permjeet

    2012-01-01

    Aim: To determine whether an intervention designed to enhance research capacity among commissioners in the area of ethnicity and health was feasible and impactful, and to identify programme elements that might usefully be replicated elsewhere.\\ud Background: How healthcare commissioners should be equipped to understand and address multiethnic needs has received little attention to-date. Being able to mobilise and apply evidence is a central element of the commissioning process that requires d...

  14. Magnetic compatibility of standard components for electrical installations: Computation of the background field and consequences on the design of the electrical distribution boards and control boards for the ITER Tokamak building

    International Nuclear Information System (INIS)

    Benfatto, I.; Bettini, P.; Cavinato, M.; Lorenzi, A. De; Hourtoule, J.; Serra, E.

    2005-01-01

    Inside the proposed Tokamak building, the ITER poloidal field magnet system would produce a stray magnetic field up to 70 mT. This is a very unusual environmental condition for electrical installation equipment and limited information is available on the magnetic compatibility of standard components for electrical distribution boards and control boards. Because this information is a necessary input for the design of the electrical installation inside the proposed ITER Tokamak building specific investigations have been carried out by the ITER European Participant Team. The paper reports on the computation of the background magnetic field map inside the ITER Tokamak building and the consequences on the design of the electrical installations of this building. The effects of the steel inside the building structure and the feasibility of magnetic shields for electrical distribution boards and control boards are also reported in the paper. The results of the test campaigns on the magnetic field compatibility of standard components for electrical distribution boards and control boards are reported in companion papers published in these proceedings

  15. NNP Life Management Programmes

    International Nuclear Information System (INIS)

    Hervia Ruperez, F.

    1996-01-01

    Around the world, power station owners are increasingly concerned to optimise Plant Life Management. In response, they are setting up Life Management programmes, of more or less ambitious scope and depth. Strategic, economic and security concerns and the close link between life extension work and the improved maintenance practices that are so important today, will increase and global these programmes for monitoring and conservation or mitigation of ageing. These programmes are all based on knowledge of the precise condition of all components and population with the greatest effect on the economics and safety of the plant, and trends in changes in their condition. (Author)

  16. An evaluation of a leadership development coaching and mentoring programme.

    Science.gov (United States)

    Le Comte, Lyndsay; McClelland, Beverley

    2017-07-03

    Purpose The purpose of this paper was to determine the value and impact of the Leadership Development - Coaching and Mentoring Programme at Counties Manukau Health and understand how the skills gained are applied. Design/methodology/approach Mixed-methods approach including surveys of programme participants and senior staff and semi-structured interviews with programme participants. Findings The survey response rate was 24.4 per cent for programme participants and 30 per cent for senior staff. Eight programme participants participated in semi-structured interviews. Of the 70 programme participants, 69 utilised their learning from the programme; 45 of 70 changed their approach to managing staff; and 40 of 68 programme participants reported that meeting with peers for triad group coaching was the most challenging aspect of the programme. Key themes identified through interviews included: working with others; not owning others' problems; professional support and development; coaching and mentoring; future participants. Practical implications The majority of participants changed their leadership behaviours as a result of the programme, which has resulted in improved communication, a more supportive culture and distributed leadership. These changes contribute to better patient care. Originality value There is a paucity of evidence in the literature about the impact of coaching and mentoring programme on leadership development and how the skills gained in such programmes are applied in practice in a healthcare context. This evaluation helps to address that gap.

  17. Implementing a screening programme for post-traumatic stress disorder following violent crime

    Directory of Open Access Journals (Sweden)

    Jonathan I. Bisson

    2010-12-01

    Full Text Available Background: The emergence of validated means to determine which individuals will develop post-traumatic stress disorder (PTSD following a traumatic event has raised the possibility of designing and implementing effective screening programmes following traumatic events. Objective: This study aimed to study the usefulness and implementation of a PTSD screening programme for victims of violent crime presenting to an emergency unit. Design: 3,349 individuals who presented to an emergency unit following a violent crime were asked to complete the Trauma Screening Questionnaire 2 weeks later. Those who scored above a standard cut-off were invited to attend a mental health assessment and subsequently offered treatment according to their needs. Results: Of the 3,349 individuals contacted, 572 (17.1% responded, 338 (10.1% screened positive, 26 (0.78% attended for assessment, and 9 (0.27% received treatment for PTSD. Conclusions: This simple screening programme was not as useful as was hoped raising questions regarding how best to develop screening programmes for PTSD following violent crime and other traumatic events.

  18. Effects of a music-creation programme on the anxiety, self-esteem, and quality of life of people with severe mental illness: A quasi-experimental design.

    Science.gov (United States)

    Chang, Beh-Huan; Chen, Bo-Wei; Beckstead, Jason W; Yang, Chiu-Yueh

    2018-06-01

    Many studies have shown that music therapy improves patients' symptoms. However, interventions using music creation as their core await further development for patients with severe mental illness (SMI). The current study investigated the effect of a music-creation programme on the anxiety, self-esteem, and quality of life of patients with SMI. A quasi-experimental design using convenience sampling was adopted to recruit patients with SMI from a psychiatric day care centre. Participants were grouped based on their willingness to undergo an intervention (26 patients in the experimental group and 23 patients in the control group). The control groups participated in conventional mental rehabilitation therapy activities. The experimental group participated in a music-creation session for 90 min every week over a 32-week period. The outcome indicators before and after the intervention were assessed using the Hamilton Anxiety Rating Scale (HAM-A), Rosenberg Self-Esteem Scale (RSES), and World Health Organization Quality of Life-BREF (WHOQOL-BREF). Finally, the intervention effect was determined using generalized estimating equations (GEEs). After 32 weeks of intervention activities, the experimental group showed significant improvements in their HAM-A total scores (P < 0.001) and RSES total scores (P = 0.005). Regarding quality of life, the improvements of the experimental group in terms of the psychological (P = 0.016) and social relationship domains (P = 0.033) were superior to those of the control group. Music-creation programmes are recommended for inclusion in the routine rehabilitation activities of patients with SMI. © 2017 Australian College of Mental Health Nurses Inc.

  19. Universal programmable devices for unambiguous discrimination

    International Nuclear Information System (INIS)

    Zhang Chi; Ying Mingsheng; Qiao, Bo

    2006-01-01

    We discuss the problem of designing unambiguous programmable discriminators for any n unknown quantum states in an m-dimensional Hilbert space. The discriminator is a fixed measurement that has two kinds of input registers: the program registers and the data register. The quantum state in the data register is what users want to identify, which is confirmed to be among the n states in program registers. The task of the discriminator is to tell the users which state stored in the program registers is equivalent to that in the data register. First, we give a necessary and sufficient condition for judging an unambiguous programmable discriminator. Then, if m=n, we present an optimal unambiguous programmable discriminator for them, in the sense of maximizing the worst-case probability of success. Finally, we propose a universal unambiguous programmable discriminator for arbitrary n quantum states

  20. Fellows, Associates & Students Programmes

    CERN Document Server

    2005-01-01

    The present document reviews the CERN Fellows, Associates and Students Programmes emphasizing the developments since 2000, when the previous review was presented to the Scientific Policy Committee, Finance Committee and Council (CERN/2325), and makes proposals for the coming five years. In summary, it is proposed to â?¢ Simplify the payment scheme for the Paid Scientific Associates Programme, which will no longer depend on candidateâ??s home support and age; â?¢ Broaden the scope of the Fellowship Programme, in order to facilitate the recruitment of young graduates in computing and engineering. Age-related eligibility conditions and payment levels will be replaced with experience-based criteria; â?¢ Modify subsistence rates for the Doctoral and Technical Student Programme in order to harmonize CERNâ??s payment levels with those offered by other research establishments. This document is presented for discussion and recommendation by the Scientific Policy Committee and approval by the Council. Additiona...

  1. (ARV) treatment training programme

    African Journals Online (AJOL)

    Winnie

    Keywords:ARV, training, evaluation, HIV, health care provider. RÉSUMÉ .... workers, adequate laboratory facilities for measuring viral load and .... questionnaire guide, the head of unit of the ART ...... begins its scale-up programme. Some of ...

  2. Elukestva õppe programm : Erasmus+

    Index Scriptorium Estoniae

    2014-01-01

    Erasmus+ programm liidab senised koostööprogrammid „Euroopa elukestva õppe programm“, „Euroopa Noored“ ning Euroopa komisjoni rahvusvahelised kõrgharidusprogrammid. Elukestva õppe programmi 2013 kokkuvõte

  3. Greek Teachers Programme 2015

    CERN Multimedia

    Hoch, Michael

    2015-01-01

    The 3rd edition of this year's Greek Teachers Programme was co-organized by CERN Education Group and the Hellenic Physical Society and took place from 8 to 12 November 2015. The programme targets physics high-school teachers from all over Greece. It aims to help teachers inspire the next generation of scientists and engineers by motivating their students to understand and appreciate how science works at the world's largest physics laboratory, whereby increasing their interest in pursuing studies in STEM fields in secondary and post-secondary education. 33 teachers took part in this programme which comprised lectures by Greek members of the CERN scientific community, with visits to experimental facilities, hands-on activities and dedicated sessions on effective and creative ways through which participants may bring physics, particle physics and CERN closer to their school classroom. In 2015, more than 100 teachers took part in the three editions of the Greek Teachers Programme.

  4. The French energy programme

    International Nuclear Information System (INIS)

    Bohnen, U.

    1980-01-01

    The challenge of the oil crisis made French energy policy react chiefly by means of a programme for the rapid expansion of nuclear energy which has become unparalleled because of its systematic realization. The following article gives a survey of this programme and its political preconditions. The French energy programme deserves special attention as the utilization of nuclear energy in France including all related activities has reached a more advanced stage than in most other countries. The effects and requirements connected with such an extensive programme which can therefore be investigated with the help of the French example migth be of importance also for other countries in a similar way. (orig./UA) [de

  5. Programme Reporting Standards (PRS for improving the reporting of sexual, reproductive, maternal, newborn, child and adolescent health programmes

    Directory of Open Access Journals (Sweden)

    Anna E. Kågesten

    2017-08-01

    Full Text Available Abstract Background Information about design, implementation, monitoring and evaluation is central to understand the impact of programmes within the field of sexual, reproductive, maternal, newborn, child and adolescent health (SRMNCAH. Existing reporting guidelines do not orient on reporting of contextual and implementation issues in sufficient detail. We therefore developed Programme Reporting Standards (PRS to be used by SRMNCAH programme implementers and researchers. Methods Building on the first step of the PRS development (a systematic review to identify reporting items, we conducted a three-round online Delphi consensus survey with experts. Consensus was defined a-priori as 80% agreement of items as essential. This was followed by a technical consultation with a group of experts to refine the items, definitions and their structuring. The revised PRS was piloted to assess its relevance to current SRMNCAH programme reports and identify key issues regarding the use of the PRS. Results Of the 81 participants invited to the Delphi survey, 20 responded to all three rounds. In the final round, 27 items received consensus as essential; three items were ranked as “borderline” essential; 20 items as supplementary. The items were subsequently revised, followed by a technical consultation with 29 experts to further review and refine the PRS. The feedback resulted in substantial changes to the structure and content of the PRS into 24 items across five domains: Programme overview; Programme components and implementation; Monitoring of Implementation; Evaluation and Results; and Synthesis. This version was used in a piloting exercise, where questions regarding how much information to report and how to comment on the quality of the information reported were addressed. All items were kept in the PRS following the pilot although minor changes were made to the flow and description of items. Conclusions The PRS 1.0 is the result of a structured

  6. Family Background and Entrepreneurship

    DEFF Research Database (Denmark)

    Lindquist, Matthew J.; Sol, Joeri; Van Praag, Mirjam

    Vast amounts of money are currently being spent on policies aimed at promoting entrepreneurship. The success of such policies, however, rests in part on the assumption that individuals are not ‘born entrepreneurs’. In this paper, we assess the importance of family background and neighborhood...... effects as determinants of entrepreneurship. We start by estimating sibling correlations in entrepreneurship. We find that between 20 and 50 percent of the variance in different entrepreneurial outcomes is explained by factors that siblings share. The average is 28 percent. Allowing for differential...... entrepreneurship does play a large role, as do shared genes....

  7. Malaysia; Background Paper

    OpenAIRE

    International Monetary Fund

    1996-01-01

    This Background Paper on Malaysia examines developments and trends in the labor market since the mid-1980s. The paper describes the changes in the employment structure and the labor force. It reviews wages and productivity trends and their effects on unit labor cost. The paper highlights that Malaysia’s rapid growth, sustained since 1987, has had a major impact on the labor market. The paper outlines the major policy measures to address the labor constraints. It also analyzes Malaysia’s recen...

  8. The Gold Standard Programme

    DEFF Research Database (Denmark)

    Neumann, Tim; Rasmussen, Mette; Ghith, Nermin

    2013-01-01

    To evaluate the real-life effect of an evidence-based Gold Standard Programme (GSP) for smoking cessation interventions in disadvantaged patients and to identify modifiable factors that consistently produce the highest abstinence rates.......To evaluate the real-life effect of an evidence-based Gold Standard Programme (GSP) for smoking cessation interventions in disadvantaged patients and to identify modifiable factors that consistently produce the highest abstinence rates....

  9. Motivation programmes of organizations

    OpenAIRE

    Pízová, Tereza

    2008-01-01

    The Bachelor Thesis "'Motivation Programmes of Organizations" focuses on an extremely important area within personnel management. Employee motivation is crucial to the effective operation of businesses. Motivation programmes assist in increasing and maintaining employee motivation and demonstrate an organization's interest in its employees. This piece is on one hand concerned with theoretical foundations of motivation, describing theories and concepts important to the area of human behaviour ...

  10. Using evaluability assessment to assess local community development health programmes: a Scottish case-study

    Directory of Open Access Journals (Sweden)

    Melissa Belford

    2017-04-01

    Full Text Available Abstract Background Evaluation of the potential effectiveness of a programme’s objectives (health or otherwise is important in demonstrating how programmes work. However, evaluations are expensive and can focus on unrealistic outcomes not grounded in strong theory, especially where there is pressure to show effectiveness. The aim of this research was to demonstrate that the evaluability assessment (a cost-effective pre-evaluation tool that primarily gives quick, constructive feedback can be used to help develop programme and outcome objectives to improve programmes while they run and to assist in producing more effective evaluations. This was done using the example of a community development programme aiming to improve health and reduce health inequalities in its target population. Methods The setting was Glasgow, Scotland, UK and focused on the Health Issues in the Community programme. Data were collected from documents and nine individual stakeholder interviews. Thematic analysis and a realist approach were used to analyse both datasets and, in conjunction with a workshop with stakeholders, produce a logic model of the programme theory and related evaluation options to explore further. Results Five main themes emerged from the analysis: History; Framework; Structure and Delivery of the Course; Theory of Action; and Barriers to Delivery and Successful Outcomes. These themes aided in drafting the logic model which revealed they key programme activities (e.g. facilitating group learning and 23 potential outcomes. The majority of these outcomes (16 were deemed to be short-term outcomes (more easily measured within the timeframe of an individual being involved in the programme e.g. increased self-esteem or awareness of individual/community health. The remaining 6 outcomes were deemed longer-term and included outcomes such as increased social capital and individual mental health and wellbeing. Conclusions We have shown that the evaluability

  11. The development, implementation and evaluation of a transitional care programme to improve outcomes of frail older patients after hospitalisation

    DEFF Research Database (Denmark)

    Heim, Noor; Rolden, Herbert; van Fenema, Esther M

    2016-01-01

    samples. CONCLUSIONS: by involving stakeholders in designing and developing the transitional care programme, commitment of healthcare providers was secured. Feasible innovations in integrated transitional care for frail older patients after hospitalisation were sustainably implemented from within......BACKGROUND: fragmented healthcare systems are poorly suited to treat the increasing number of older patients with multimorbidity. OBJECTIVE: to report on the development, implementation and evaluation of a regional transitional care programme, aimed at improving the recovery rate of frail...... hospitalised older patients. METHODS: the programme was drafted in co-creation with organisations representing older adults, care providers and knowledge institutes. Conducting an action research project, the incidence of adverse outcomes within 3 months after hospital admission, and long-term care expenses...

  12. NOVANA - National Monitoring and Assessment Programme for the Aquatic and Terrestrial Environment

    DEFF Research Database (Denmark)

    Svendsen, L. M.

    This report is Part 1 of the Programme Description of NOVANA - the Nationwide Monitoring and Assessment Programme for the Aquatic and Terrestrial Environments. Part 1 comprises a general description of the background for the programme, including the international obliga-tions and requirements...... for monitoring of nature and the environment. The overall objective and the scientific and strategic background for the priorities upon which NOVANA pro-gramme is based are described, as are the organization of the programme, the overall economy and the technical assumptions made. Finally the scientific content...

  13. Optical polarization: background and camouflage

    Science.gov (United States)

    Škerlind, Christina; Hallberg, Tomas; Eriksson, Johan; Kariis, Hans; Bergström, David

    2017-10-01

    Polarimetric imaging sensors in the electro-optical region, already military and commercially available in both the visual and infrared, show enhanced capabilities for advanced target detection and recognition. The capabilities arise due to the ability to discriminate between man-made and natural background surfaces using the polarization information of light. In the development of materials for signature management in the visible and infrared wavelength regions, different criteria need to be met to fulfil the requirements for a good camouflage against modern sensors. In conventional camouflage design, the aimed design of the surface properties of an object is to spectrally match or adapt it to a background and thereby minimizing the contrast given by a specific threat sensor. Examples will be shown from measurements of some relevant materials and how they in different ways affect the polarimetric signature. Dimensioning properties relevant in an optical camouflage from a polarimetric perspective, such as degree of polarization, the viewing or incident angle, and amount of diffuse reflection, mainly in the infrared region, will be discussed.

  14. Waste Disposal: The PRACLAY Programme

    Energy Technology Data Exchange (ETDEWEB)

    De Bruyn, D

    2000-07-01

    Principal achievements in 2000 with regard to the PRACLAY programme are presented. The PRACLAY project has been conceived: (1) to demonstrate the construction and the operation of a gallery for the disposal of HLW in a clay formation; (2) to improve knowledge on deep excavations in clay through modelling and monitoring; (3) to design, install and operate a complementary mock-up test (OPHELIE) on the surface. In 1999, efforts were focussed on the operation of the OPHELIE mock-up and the CLIPEX project to monitor the evolution of hydro-mechanical parameters of the Boom Clay Formation near the face of a gallery during excavation.

  15. Waste Disposal: The PRACLAY Programme

    International Nuclear Information System (INIS)

    De Bruyn, D.

    2000-01-01

    Principal achievements in 2000 with regard to the PRACLAY programme are presented. The PRACLAY project has been conceived: (1) to demonstrate the construction and the operation of a gallery for the disposal of HLW in a clay formation; (2) to improve knowledge on deep excavations in clay through modelling and monitoring; (3) to design, install and operate a complementary mock-up test (OPHELIE) on the surface. In 1999, efforts were focussed on the operation of the OPHELIE mock-up and the CLIPEX project to monitor the evolution of hydro-mechanical parameters of the Boom Clay Formation near the face of a gallery during excavation

  16. Programmable, automated transistor test system

    Science.gov (United States)

    Truong, L. V.; Sundburg, G. R.

    1986-01-01

    A programmable, automated transistor test system was built to supply experimental data on new and advanced power semiconductors. The data will be used for analytical models and by engineers in designing space and aircraft electric power systems. A pulsed power technique was used at low duty cycles in a nondestructive test to examine the dynamic switching characteristic curves of power transistors in the 500 to 1000 V, 10 to 100 A range. Data collection, manipulation, storage, and output are operator interactive but are guided and controlled by the system software.

  17. Backgrounded but not peripheral

    DEFF Research Database (Denmark)

    Hovmark, Henrik

    2013-01-01

    .e. the schema enters into apparently contradictory constructions of the informants’ local home-base and, possibly, of their identity (cf. Hovmark, 2010). Second, I discuss the status and role of the specific linguistic category in question, i.e. the directional adverbs. On the one hand we claim that the DDAs......In this paper I pay a closer look at the use of the CENTRE-PERIPHERY schema in context. I address two specific issues: first, I show how the CENTRE-PERIPHERY schema, encoded in the DDAs, enters into discourses that conceptualize and characterize a local community as both CENTRE and PERIPHERY, i......; furthermore, the DDAs are backgrounded in discourse. Is it reasonable to claim, rather boldly, that “the informants express their identity in the use of the directional adverb ud ‘out’ etc.”? In the course of this article, however, I suggest that the DDAs in question do contribute to the socio...

  18. OCRWM Backgrounder, January 1987

    International Nuclear Information System (INIS)

    1987-01-01

    The Nuclear Waste Policy Act of 1982 (NWPA) assigns to the US Department of Energy (DOE) responsibility for developing a system to safely and economically transport spent nuclear fuel and high-level radioactive waste from various storage sites to geologic repositories or other facilities that constitute elements of the waste management program. This transportation system will evolve from technologies and capabilities already developed. Shipments of spent fuel to a monitored retrievable storage (MRS) facility could begin as early as 1996 if Congress authorizes its construction. Shipments of spent fuel to a geologic repository are scheduled to begin in 1998. The backgrounder provides an overview of DOE's cask development program. Transportation casks are a major element in the DOE nuclear waste transportation system because they are the primary protection against any potential radiation exposure to the public and transportation workers in the event an accident occurs

  19. Monitored background radiometer

    International Nuclear Information System (INIS)

    Ruel, C.

    1988-01-01

    A monitored background radiometer is described comprising: a thermally conductive housing; low conductivity support means mounted on the housing; a sensing plate mounted on the low conductivity support means and spaced from the housing so as to be thermally insulated from the housing and having an outwardly facing first surface; the sensing plate being disposed relative to the housing to receive direct electromagnetic radiation from sources exterior to the radiometer upon the first surface only; means for controllably heating the sensing plate; first temperature sensitive means to measure the temperature of the housing; and second temperature sensitive means to measure the temperature of the sensing plate, so that the heat flux at the sensing plate may be determined from the temperatures of the housing and sensing plate after calibration of the radiometer by measuring the temperatures of the housing and sensing plate while controllably heating the sensing plate

  20. TRAVELLERS: a school-based early intervention programme helping young people manage and process change, loss and transition. Pilot phase findings.

    Science.gov (United States)

    Dickinson, Pauline; Coggan, Carolyn; Bennett, Sara

    2003-06-01

    This paper outlines the conceptual background and findings from the pilot phase of TRAVELLERS--an early intervention programme designed to enhance protective factors for young people experiencing change, loss and transition events and early signs of emotional distress. The pilot study aimed to determine whether TRAVELLERS was a feasible, acceptable and promising intervention for young people within secondary schools in Aotearoa/New Zealand. The conceptual origins of the TRAVELLERS programme are described in terms of: adolescent mental health concerns; emerging mental health promotion theory and practice; and prevention and early intervention models. The key elements of the TRAVELLERS programme are described. The programme was piloted in two secondary schools, one rural and one urban with 34 participants (females n = 24, males n = 10). Evaluation methods included: review of programme materials; identification of potential selection tools appropriate to Year 9 students; analysis of selection questionnaire; and conduct of feedback from participants, facilitators and parents/caregivers. The TRAVELLERS programme provides a means of identifying and selecting young people who may benefit from participating in an early intervention programme. The programme has achieved a statistically significant reduction in participants' distress (p Young people were overwhelmingly enthusiastic about most aspects of TRAVELLERS. School personnel reported that TRAVELLERS was an appropriate and acceptable programme to the school. Targeted interventions provided within a supportive school environment can contribute to enhancing protective factors such as personal and interpersonal coping strategies, increased help-seeking behaviour, and young people feeling more positive about themselves and their lives. The pilot programme has been amended and prepared for a two year trial phase in 10 secondary schools during 2002-2003.

  1. A process evaluation of a supervisory development programme

    Directory of Open Access Journals (Sweden)

    Jasper Buys

    2012-07-01

    Research purpose: The study aimed to provide information about coverage, service delivery, organisational resources, and medium-term outcomes for a supervisory development programme (SDP in the hospitality industry. Motivation for the study: The primary motivation was to assist programme staff to understand their programme and also to generate information that the programme staff could use to reflect on the programme’s performance and future direction. Research design, approach and method: A mixture of quantitative and qualitative methods was employed, namely: a literature review; personal interviews; and internal programme documentation, such as e-mail correspondence, financial statements, attendance registers, and personnel records. Personal interviews were conducted with two stakeholders, namely the programme manager and programme administrator. The programme data of 69 participants in the SDP were utilised for the evaluation. Main findings: The evaluation’s main finding concluded that the ‘implemented programme’ was not congruent with the ‘planned programme’. Practical/managerial implications: It is recommended that programme activities and theory should be re-evaluated, as the programme is used mainly as a training programme for new appointees, rather than a management development programme to create a pool of potential supervisors. Programme uptake and output should also be closely aligned. The length of time that people in the pool of potential supervisors had to wait before they were appointed should also be reduced. Contribution/value-add: By explicating the basic programme theory and studying programme implementation, this evaluation serves as a starting point for future evaluations of the SDP.

  2. School-based vaccination programmes: a systematic review of the evidence on organisation and delivery in high income countries

    Directory of Open Access Journals (Sweden)

    Sarah Perman

    2017-03-01

    Full Text Available Abstract Background Many countries have recently expanded their childhood immunisation programmes. Schools are an increasingly attractive setting for delivery of these new immunisations because of their ability to reach large numbers of children in a short period of time. However, there are organisational challenges to delivery of large-scale vaccination programmes in schools. Understanding the facilitators and barriers is important for improving the delivery of future school-based vaccination programmes. Methods We undertook a systematic review of evidence on school-based vaccination programmes in order to understand the influence of organisational factors on the delivery of programmes. Our eligibility criteria were studies that (1 focused on childhood or adolescent vaccination programmes delivered in schools; (2 considered organisational factors that influenced the preparation or delivery of programmes; (3 were conducted in a developed or high-income country; and (4 had been peer reviewed. We searched for articles published in English between 2000 and 2015 using MEDLINE and HMIC electronic databases. Additional studies were identified by searching the Cochrane Library and bibliographies. We extracted data from the studies, assessed quality and the risk of bias, and categorised findings using a thematic framework of eight organisational factors. Results We found that most of the recent published literature is from the United States and is concerned with the delivery of pandemic or seasonal flu vaccination programmes at a regional (state or local level. We found that the literature is largely descriptive and not informed by the use of theory. Despite this, we identified common factors that influence the implementation of programmes. These factors included programme leadership and governance, organisational models and institutional relationships, workforce capacity and roles particularly concerning the school nurse, communication with parents and

  3. Introducing new diagnostics into STI control programmes: the importance of programme science.

    Science.gov (United States)

    Peeling, Rosanna W; Mabey, David; Ballard, Ronald C

    2013-03-01

    Many innovative diagnostic technologies will become commercially available over the next 5-10 years. These tests can potentially transform the diagnosis of sexually transmitted infections but their introduction into control programmes can be hampered by health system constraints, and political, cultural, socioeconomic and behavioural factors. We used the introduction of syphilis rapid tests to illustrate the importance of programme science to address the gap between accruing evidence of acceptable test performance and the complexity of programme design, implementation and evaluation of test deployment to address public health needs and improve patient-important outcomes.

  4. The INTEGRAL Core Observing Programme

    DEFF Research Database (Denmark)

    Winkler, C.; Gehrels, N.; Lund, Niels

    1999-01-01

    The Core Programme of the INTEGRAL mission is defined as the portion of the scientific programme covering the guaranteed time observations for the INTEGRAL Science Working Team. This paper describes the current status of the Core Programme preparations and summarizes the key elements...... of the observing programme....

  5. Academic Training: The cosmic microwave background - Lecture series

    CERN Multimedia

    Françoise Benz

    2004-01-01

    ACADEMIC TRAINING LECTURE REGULAR PROGRAMME 14, 15, 16, 17 and 18 June From 11:00 hrs to 12:00 hrs - Main Auditorium bldg. 500 The cosmic microwave background M. Zaldarriaga / Harvard University, USA ENSEIGNEMENT ACADEMIQUE ACADEMIC TRAINING Françoise Benz 73127 academic.training@cern.ch

  6. Early-Years Teachers' Professional Upgrading in Science: a Long-Term Programme

    Science.gov (United States)

    Kallery, Maria

    2017-04-01

    In this paper, we present a professional development/upgrading programme in science for early-years teachers and investigate its impact on the teachers' competencies in relation to their knowledge and teaching of science. The basic idea of the programme was to motivate the teachers by making them members of an action research group aimed at developing and implementing curriculum activities to which they would contribute and thus meaningfully engaging them in their own learning. The programme used a `collaborative partnership' model for the development of the activities. In this model, the collaborative notion is defined as an act of `shared creation': partners share a goal and members bring their expertise to the partnership. Within this context, the partners were a researcher in science education with a background in physics, who also served as a facilitator, and six in-service early-years teachers with a background in early-years pedagogy and developmental sciences, who had many years of experience (classroom experts). These teachers participated in the programme as co-designers, but were involved to a significantly lesser degree than the researcher. The programme procedures comprised group work and individual teachers' class work. Data sources included teachers' essays, field-notes, lesson recordings and group-work records. Data were qualitatively analysed. The main results indicate improvement of teachers' `transformed' knowledge of the subject matter, development/improvement of knowledge of instructional strategies, including factors related to quality of implementation of the activities, knowledge of the pupils and improvement of the teachers' efficacy.

  7. Hanford Site background: Part 1, Soil background for nonradioactive analytes

    International Nuclear Information System (INIS)

    1993-04-01

    Volume two contains the following appendices: Description of soil sampling sites; sampling narrative; raw data soil background; background data analysis; sitewide background soil sampling plan; and use of soil background data for the detection of contamination at waste management unit on the Hanford Site

  8. The French nuclear programme

    International Nuclear Information System (INIS)

    Feger, M.

    1990-01-01

    EDF has long been interested in the use of nuclear energy for thermal power generation. After a period of apprenticeship and experiments, EDF launched a major PWR plant programme so as to reduce France's energy dependence and master generation costs. This programme, based on standardization, has achieved the desired results. It must now be adapted to suit the needs of the 21st century. For this programme, all those involved (Governmental authorities, EDF, manufacturers) were mobilized to an unprecedented extent and rigorous working methods were imposed. Experience feedback has been used to make improvements both to the installations themselves and to procedures. Results have proved satisfactory as regards nuclear safety but vigilance must be maintained. Public opinion on nuclear power is reserved we are sentenced to achieving a 'fault-free' track record, all the while mastering costs, so as to ensure the continuing use of nuclear energy. (author)

  9. The French nuclear programme

    Energy Technology Data Exchange (ETDEWEB)

    Feger, M [Ecole Nationale Superieure d' Electrotechnique de Grenoble, Institute National des Sciences et Techniques Nucleaires (Saclay), Gif-sur-Yvette, Electricite de France (France)

    1990-06-01

    EDF has long been interested in the use of nuclear energy for thermal power generation. After a period of apprenticeship and experiments, EDF launched a major PWR plant programme so as to reduce France's energy dependence and master generation costs. This programme, based on standardization, has achieved the desired results. It must now be adapted to suit the needs of the 21st century. For this programme, all those involved (Governmental authorities, EDF, manufacturers) were mobilized to an unprecedented extent and rigorous working methods were imposed. Experience feedback has been used to make improvements both to the installations themselves and to procedures. Results have proved satisfactory as regards nuclear safety but vigilance must be maintained. Public opinion on nuclear power is reserved we are sentenced to achieving a 'fault-free' track record, all the while mastering costs, so as to ensure the continuing use of nuclear energy. (author)

  10. External Mobility Programme

    CERN Multimedia

    HR Department

    2007-01-01

    Every year, a significant number of highly-skilled staff members leave the Organization and offer their talents on the European job market. CERN is launching a programme aiming to help staff members to whom the Organization cannot offer an indefinite contract in the transition towards their next employment. The programme, which is based on the establishment of a number of partnerships with potential employers in the private sector, will run on a voluntary basis. Staff members who have received confirmation that they will not be offered an indefinite contract and who are interested in availing themselves of the opportunities offered by the programme, are invited to enrol by following the procedure described at: https://ert.cern.ch/browse_intranet/wd_pds?p_web_page_id=5841 Applications will be processed in the strictest confidence by the Human Resources Department and eligible profiles will then be made available to partner companies for recruitment purposes. Any subsequent ...

  11. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    This publication is unique in its demystification and operationalization of the complex and elusive nature of the design process. The publication portrays the designer’s daily work and the creative process, which the designer is a part of. Apart from displaying the designer’s work methods...... and design parameters, the publication shows examples from renowned Danish design firms. Through these examples the reader gets an insight into the designer’s reality....

  12. Probabilistic programmable quantum processors

    International Nuclear Information System (INIS)

    Buzek, V.; Ziman, M.; Hillery, M.

    2004-01-01

    We analyze how to improve performance of probabilistic programmable quantum processors. We show how the probability of success of the probabilistic processor can be enhanced by using the processor in loops. In addition, we show that an arbitrary SU(2) transformations of qubits can be encoded in program state of a universal programmable probabilistic quantum processor. The probability of success of this processor can be enhanced by a systematic correction of errors via conditional loops. Finally, we show that all our results can be generalized also for qudits. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

  13. A programme in transition

    International Nuclear Information System (INIS)

    Dean, S.O.

    1992-01-01

    Fusion is beginning its transition from a scientific research programme to that of an engineering development programme aimed at practical applications. This transition is likely to last a decade or more because many scientific questions remain and because of the magnitude and cost of the engineering issues. This article reviews briefly the encouraging results produced at the Joint European Torus (JET) where 1.7 MW of fusion power was generated for 2 seconds in experiments in November 1991, the remaining scientific issues, the role of near-term experimental reactors like the International Thermonuclear Experimental reactor (ITER) and other approaches to a demonstration power plant. (author)

  14. Computer mathematics for programmers

    CERN Document Server

    Abney, Darrell H; Sibrel, Donald W

    1985-01-01

    Computer Mathematics for Programmers presents the Mathematics that is essential to the computer programmer.The book is comprised of 10 chapters. The first chapter introduces several computer number systems. Chapter 2 shows how to perform arithmetic operations using the number systems introduced in Chapter 1. The third chapter covers the way numbers are stored in computers, how the computer performs arithmetic on real numbers and integers, and how round-off errors are generated in computer programs. Chapter 4 details the use of algorithms and flowcharting as problem-solving tools for computer p

  15. Note on bouncing backgrounds

    Science.gov (United States)

    de Haro, Jaume; Pan, Supriya

    2018-05-01

    The theory of inflation is one of the fundamental and revolutionary developments of modern cosmology that became able to explain many issues of the early Universe in the context of the standard cosmological model (SCM). However, the initial singularity of the Universe, where physics is indefinite, is still obscure in the combined SCM +inflation scenario. An alternative to SCM +inflation without the initial singularity is thus always welcome, and bouncing cosmology is an attempt at that. The current work is thus motivated to investigate the bouncing solutions in modified gravity theories when the background universe is described by the spatially flat Friedmann-Lemaître-Robertson-Walker (FLRW) geometry. We show that the simplest way to obtain the bouncing cosmologies in such spacetime is to consider some kind of Lagrangian whose gravitational sector depends only on the square of the Hubble parameter of the FLRW universe. For these modified Lagrangians, the corresponding Friedmann equation, a constraint in the dynamics of the Universe, depicts a curve in the phase space (H ,ρ ), where H is the Hubble parameter and ρ is the energy density of the Universe. As a consequence, a bouncing cosmology is obtained when this curve is closed and crosses the axis H =0 at least twice, and whose simplest particular example is the ellipse depicting the well-known holonomy corrected Friedmann equation in loop quantum cosmology (LQC). Sometimes, a crucial point in such theories is the appearance of the Ostrogradski instability at the perturbative level; however, fortunately enough, in the present work, as long as the linear level of perturbations is concerned, this instability does not appear, although it may appear at the higher order of perturbations.

  16. The Cosmic Microwave Background Anisotropy

    Science.gov (United States)

    Bennett, C. L.

    1994-12-01

    The properties of the cosmic microwave background radiation provide unique constraints on the history and evolution of the universe. The first detection of anisotropy of the microwave radiation was reported by the COBE Team in 1992, based on the first year of flight data. The latest analyses of the first two years of COBE data are reviewed in this talk, including the amplitude of the microwave anisotropy as a function of angular scale and the statistical nature of the fluctuations. The two-year results are generally consistent with the earlier first year results, but the additional data allow for a better determination of the key cosmological parameters. In this talk the COBE results are compared with other observational anisotropy results and directions for future cosmic microwave anisotropy observations will be discussed. The National Aeronautics and Space Administration/Goddard Space Flight Center (NASA/GSFC) is responsible for the design, development, and operation of the Cosmic Background Explorer (COBE). Scientific guidance is provided by the COBE Science Working Group.

  17. Recovery programme for ICU survivors has no effect on relatives' quality of life

    DEFF Research Database (Denmark)

    Bohart, Søs; Egerod, Ingrid; Bestle, Morten H

    2018-01-01

    BACKGROUND: Relatives of intensive care patients are at risk of developing symptoms of anxiety, depression and posttraumatic stress resulting in reduced health-related quality of life. Recovery programmes for patients have been implemented, but their effect on relatives is uncertain. AIM...... outcome: health-related quality of life (HRQOL). SECONDARY OUTCOMES: Sense of coherence (SOC), and symptoms of anxiety, depression and posttraumatic stress, compared to standard care at 12 months after intensive care discharge. RESULTS: No difference in HRQOL between groups was observed at 12 months (mean......: To determine whether relatives benefit from a recovery programme intended for intensive care survivors. RESEARCH DESIGN: A randomised controlled trial of 181 adult relatives: intervention group (n = 87), control group (n = 94). SETTING: Ten intensive care units in Denmark. MAIN OUTCOME MEASURES: Primary...

  18. Reliability evaluation programmable logic devices

    International Nuclear Information System (INIS)

    Srivani, L.; Murali, N.; Thirugnana Murthy, D.; Satya Murty, S.A.V.

    2014-01-01

    Programmable Logic Devices (PLD) are widely used as basic building modules in high integrity systems, considering their robust features such as gate density, performance, speed etc. PLDs are used to implement digital design such as bus interface logic, control logic, sequencing logic, glue logic etc. Due to semiconductor evolution, new PLDs with state-of-the-art features are arriving to the market. Since these devices are reliable as per the manufacturer's specification, they were used in the design of safety systems. But due to their reduced market life, the availability of performance data is limited. So evaluating the PLD before deploying in a safety system is very important. This paper presents a survey on the use of PLDs in the nuclear domain and the steps involved in the evaluation of PLD using Quantitative Accelerated Life Testing. (author)

  19. Optical programmable Boolean logic unit.

    Science.gov (United States)

    Chattopadhyay, Tanay

    2011-11-10

    Logic units are the building blocks of many important computational operations likes arithmetic, multiplexer-demultiplexer, radix conversion, parity checker cum generator, etc. Multifunctional logic operation is very much essential in this respect. Here a programmable Boolean logic unit is proposed that can perform 16 Boolean logical operations from a single optical input according to the programming input without changing the circuit design. This circuit has two outputs. One output is complementary to the other. Hence no loss of data can occur. The circuit is basically designed by a 2×2 polarization independent optical cross bar switch. Performance of the proposed circuit has been achieved by doing numerical simulations. The binary logical states (0,1) are represented by the absence of light (null) and presence of light, respectively.

  20. Generic learning skills in academically-at-risk medical students: a development programme bridges the gap.

    Science.gov (United States)

    Burch, Vanessa C; Sikakana, Cynthia N T; Gunston, Geney D; Shamley, Delva R; Murdoch-Eaton, Deborah

    2013-08-01

    Widening access to medical students from diverse educational backgrounds is a global educational mandate. The impact, on students' generic learning skills profiles, of development programmes designed for students at risk of attrition is unknown. This study investigated the impact of a 12-month Intervention Programme (IP) on the generic learning skills profile of academically-at-risk students who, after failing at the end of the first semester, completed the IP before entering the second semester of a conventional medical training programme. This prospective study surveyed medical students admitted in 2009 and 2010, on entry and on completion of first year, on their reported practice and confidence in information handling, managing own learning, technical and numeracy, computer, organisational and presentation skills. Of 414 first year students, 80 (19%) entered the IP. Levels of practice and confidence for five of the six skills categories were significantly poorer at entry for IP students compared to conventional stream students. In four categories these differences were no longer statistically significant after students had completed the IP; 62 IP students (77.5%) progressed to second year. A 12-month development programme, the IP, effectively addressed generic learning skills deficiencies present in academically-at-risk students entering medical school.

  1. Collaborative Learning with Sustainability-driven Projects: A Summary of the EPS@ISEP Programme

    Directory of Open Access Journals (Sweden)

    Manuel Fernando Silva

    2018-06-01

    Full Text Available This paper describes the collaborative learning environment, aligned with the United Nations Millennium Development Goals, provided by the European Project Semester (EPS. EPS is a one semester capstone project programme offered by eighteen European engineering schools as part of their student ex-change programme portfolio. In this international programme, students are organized in teams, grouping individuals from diverse academic backgrounds and nationalities. The teams, after choosing a project proposal, become fully responsible for the conduction of their projects. By default, project proposals refer to open multidisciplinary real problems. The purpose of the project is to expose students to problems of a greater dimension and complexity than those faced throughout the degree programme as well as to put them in con-tact with the so-called real world, in opposition to the academic world. EPS provides an integrated framework for undertaking capstone projects, which is focused on multicultural and multidisciplinary teamwork, communication, problem-solving, creativity, leadership, entrepreneurship, ethical reasoning and global contextual analysis. Specifically, the design and development of sustainable systems for growing food allow students not only to reach the described objectives, but to foster sustainable development practices. As a re-sult, we recommend the adoption of this category of projects within EPS for the benefit of engineering students and of the society as a whole.

  2. An (even) broader perspective: Combining environmental processes and natural hazards education in a MSc programme

    Science.gov (United States)

    Heckmann, Tobias; Haas, Florian; Trappe, Martin; Cyffka, Bernd; Becht, Michael

    2010-05-01

    Natural hazards are processes occurring in the natural environment that negatively affect human society. In most instances, the definition of natural hazards implies sudden events as different as earthquakes, floods or landslides. In addition, there are other phenomena that occur more subtly or slowly, and nevertheless may have serious adverse effects on the human environment. Hence, a comprehensive study programme in natural hazards has to include not only the conspicuous causes and effects of natural catastrophes, but of environmental processes in general. Geography as a discipline is located at the interface of natural, social and economic sciences; the physical geography programme described here is designed to include the social and economic dimension as well as management issues. Modules strengthening the theoretical background of geomorphic, geological, hydrological and meteorological processes and hazards are complemented by practical work in the field and the laboratory, dealing with measuring and monitoring environmental processes. On this basis, modeling and managing skills are developed. Another thread in the transdisciplinary programme deals with sustainability and environmental policy issues, and environmental psychology (e.g. perception of and reaction to hazards). This will improve the communication and team working skills of students wherever they are part of an interdisciplinary working group. Through the involvement in research programmes, students are confronted ‘hands on' with the different aspects of environmental processes and their consequences; thus, they will be excellently but not exclusively qualified for positions in the ‘natural hazards' sector.

  3. Looping up Professional Reflection in Honours Programmes

    Science.gov (United States)

    Van Dijk, Trijntje

    2012-01-01

    Within the Saxion Universities in the Netherlands, a profile of the "Reflective Professional" comprises a number of competencies that the honours programmes are designed to develop and support. This article describes the process of developing these competencies. The process involves three loops of learning, characterized by three sets of…

  4. Material development for India's nuclear power programme

    Indian Academy of Sciences (India)

    rials with emphasis on development of fabrication routes of zirconium alloys for .... nuclear power programme, which envisages design and construction of thermal breeder ... Production of Hf-free nuclear grade zirconium ..... Later on for pressure tubes specified limit for hydrogen content in the as manufactured condition.

  5. Poverty Alleviation Programmes in Nigeria: Reflections on ...

    African Journals Online (AJOL)

    In it, we have argued that past poverty alleviation policies and programmes have been elitist and non-participatory, especially by the target population. In most cases the designs for poverty alleviations are characterized by improper conceptualization, grandiosity and lack of social justice even in implementation. Based on ...

  6. Evaluating deceased organ donation: a programme theory approach.

    Science.gov (United States)

    Manzano, Ana; Pawson, Ray

    2014-01-01

    Organ donation and transplantation services represent a microcosm of modern healthcare organisations. They are complex adaptive systems. They face perpetual problems of matching supply and demand. They operate under fierce time and resource constraints. And yet they have received relatively little attention from a systems perspective. The purpose of this paper is to consider some of the fundamental issues in evaluating, improving and policy reform in such complex systems. The paper advocates an approach based on programme theory evaluation. The paper explains how the death to donation to transplantation process depends on the accumulation of series of embedded, institutional sub-processes. Evaluators need to be concerned with this whole system rather than with its discrete parts or sectors. Policy makers may expect disappointment if they seek to improve donation rates by applying nudges or administrative reforms at a single point in the implementation chain. These services represent concentrated, perfect storms of complexity and the paper offers guidance to practitioners with bio-medical backgrounds on how such services might be evaluated and improved. For the methodological audience the paper caters for the burgeoning interest in programme theory evaluation while illustrating the design phase of this research strategy.

  7. Analog circuit design and field programmable gat

    Indian Academy of Sciences (India)

    HAMID REZA ABDOLMOHAMMADI

    2018-04-30

    Apr 30, 2018 ... 1Department of Electrical Engineering, Golpayegan University of ... 4Department of Electrical and Communication Engineering, The Papua New Guinea University of ... because of its effective and easy implementation as it.

  8. Programme DNA Lattices: Design, Synthesis and Applications

    National Research Council Canada - National Science Library

    Reif, John

    2006-01-01

    .... Self-assembled DNA nanostructures provide a methodology for bottom-up nanoscale construction of highly patterned systems, utilizing macromolecular DNA tiles" composed of branched DNA, self-assembled...

  9. Task analysis in neurosciences programme design - neurological ...

    African Journals Online (AJOL)

    Defining educational objectives is the key to achieving the goal of professional competence in students. The technique of task analysis was selected to determine components of competence in clinical neurology appropriate to the needs of primary care. A survey of neurological problems in general practice revealed that ...

  10. Design Basis for PLiM Programme

    International Nuclear Information System (INIS)

    Kang, Ki Sig

    2013-01-01

    Plant Life Management Output: • Critical SSCs (safety and power production) - • Provides a decision analysis tool and methodology that prioritizes and allocates the plant resources; • Provides financially optimized long-term aging and obsolescence management plans; • Identifies and mitigates risks associated with components. • Identifies aging effects that can lead to reduced reliability and unexpected degradation to availability

  11. Students' attitudes towards library user education programme in ...

    African Journals Online (AJOL)

    The study was set to ascertain the methods of packaging library user education programme in university libraries in Benue State and determine the attitude of students towards presentation of library user education programmes. The study adopted a descriptive survey research design. The population of study was 6253 and ...

  12. Cross-Evaluation of Degree Programmes in Higher Education

    Science.gov (United States)

    Kettunen, Juha

    2010-01-01

    Purpose: This study seeks to develop and describe the benchmarking approach of enhancement-led evaluation in higher education and to present a cross-evaluation process for degree programmes. Design/methodology/approach: The benchmarking approach produces useful information for the development of degree programmes based on self-evaluation,…

  13. Curriculum Innovation in Undergraduate Accounting Degree Programmes through "Virtual Internships"

    Science.gov (United States)

    Bayerlein, Leopold

    2015-01-01

    Purpose: The purpose of this paper is to discuss major criticisms of traditional undergraduate accounting programmes and to introduce virtual internships as a curriculum innovation that addresses these criticisms. Design/methodology/approach: The main aim of the paper is to inspire curriculum innovation in accounting programmes though the…

  14. Effectiveness of a multicentre nasopharyngeal carcinoma awareness programme in Indonesia

    NARCIS (Netherlands)

    Fles, R.; Indrasari, S.R.; Herdini, C.; Martini, S.; Isfandiari, A.; Romdhoni, A.C.; Adham, M.; Mayangsari, I.D.; van Werkhoven, E.; Wildeman, M.A.; Hariwiyanto, B.; Hermani, B.; Kentjono, W.A.; Haryana, S.M.; Schmidt, M.K.; Tan, I.B.

    2016-01-01

    Objective: To evaluate the effectiveness of a nasopharyngeal carcinoma (NPC) awareness programme on the short-term and long-term improvement of knowledge and referral of patients with NPC by primary healthcare centres (PHCCs) staff in Indonesia. Design: The NPC awareness programme consisted of 12

  15. Empirical Investigation of Predictors of Success in an MBA Programme

    Science.gov (United States)

    Gupta, Atul; Turek, Joseph

    2015-01-01

    Purpose: The twofold purpose of this study was to determine if selected variables were predictors of: student performance in the MBA programme; and student performance on the MBA MFT exam. Design/methodology/approach: This study focuses on MBA graduates at a US university who have successfully completed the entire programme requirements. Real…

  16. Mexican medfly programme

    International Nuclear Information System (INIS)

    1980-01-01

    This film tells the story of the fight against and final extinction of the Mediterranean fruit-fly (Ceratitis capitata) in Mexico. By producing billions of high quality sterile flies in the Medfly reproduction and sterilization laboratory in the province of Chiapas and releasing them over infested areas, the Moscamed Programme succeeded in eradicating this pest from Mexico in 1982

  17. Nuclear safety. Improvement programme

    International Nuclear Information System (INIS)

    2000-01-01

    In this brochure the improvement programme of nuclear safety of the Mochovce NPP is presented in detail. In 1996, a 'Mochovce NPP Nuclear Safety Improvement Programme' was developed in the frame of unit 1 and 2 completion project. The programme has been compiled as a continuous one, with the aim to reach the highest possible safety level at the time of commissioning and to establish good preconditions for permanent safety improvement in future. Such an approach is in compliance with the world's trends of safety improvement, life-time extension, modernisation and nuclear station power increase. The basic document for development of the 'Programme' is the one titled 'Safety Issues and their Ranking for WWER 440/213 NPP' developed by a group of IAEA experts. The following organisations were selected for solution of the safety measures: EUCOM (Consortium of FRAMATOME, France, and SIEMENS, Germany); SKODA Prague, a.s.; ENERGOPROJEKT Prague, a.s. (EGP); Russian organisations associated in ATOMENERGOEXPORT; VUJE Trnava, a.s

  18. Progressive Retirement Programme

    CERN Document Server

    HR Department

    2009-01-01

    Following the Standing Concertation Committee meeting of 2 December 2008, please note that the Progressive Retirement Programme has been extended by one year, i.e. until 31 March 2010. Further information is available on : https://hr-services.web.cern.ch/hr-services/services-Ben/prp/prp.asp HR Department, tel. 73903

  19. SET-Routes programme

    CERN Multimedia

    Marietta Schupp, EMBL Photolab

    2008-01-01

    Dr Sabine Hentze, specialist in human genetics, giving an Insight Lecture entitled "Human Genetics – Diagnostics, Indications and Ethical Issues" on 23 September 2008 at EMBL Heidelberg. Activities in a achool in Budapest during a visit of Angela Bekesi, Ambassadors for the SET-Routes programme.

  20. Programmable dc motor controller

    Science.gov (United States)

    Hopwood, J. E.

    1982-11-01

    A portable programmable dc motor controller, with features not available on commercial instruments was developed for controlling fixtures during welding processes. The controller can be used to drive any dc motor having tachometer feedback and motor requirements not exceeding 30 volts, 3 amperes. Among the controller's features are delayed start time, upslope time, speed, and downslope time.

  1. Exchange and fellowship programme

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-04-15

    By February 1959, the IAEA had received and considered nearly 300 nominations from 31 countries for nuclear science fellowships. More than 200 of the candidates - from 29 countries - had been selected for placement in centres of training in 21 countries. The programme covers three types of training: 1. General techniques training: to develop skills in the use of some fundamental techniques in the field of nuclear energy; 2. Specialist training: to prepare specialists in the theoretical and experimental aspects of the science and technology of nuclear energy; 3. Research training: to provide advanced training, including active participation in research work; this is for persons potentially qualified to develop and carry out research programmes in the basic sciences and engineering. The duration of training varies from some weeks to five or six years. The long-duration training is given at universities or educational establishments of university level, and is of special interest to Member States lacking personnel with the requisite university education. Under its 1959 exchange and fellowship programme, the Agency will be in a position to award over 400 fellowships. Some of these will be paid out of the Agency's operating fund, while 130 fellowships have been offered directly to IAEA by Member States for training at their universities or institutes. There are two new features in the Agency's 1959 programme. One provides for fellowships for scientific research work, the other is the exchange of specialists

  2. Air Quality Monitoring Programme

    DEFF Research Database (Denmark)

    Kemp, K.; Palmgren, F.

    The Danish Air Quality Monitoring Programme (LMP IV) has been revised in accordance with the Framework Directive and the first three daughter directives of SO2, NOx/NO2, PM10, lead, benzene, CO and ozone. PM10 samplers are under installation and the installation will be completed during 2002...

  3. Conceptualizing Programme Evaluation

    Science.gov (United States)

    Hassan, Salochana

    2013-01-01

    The main thrust of this paper deals with the conceptualization of theory-driven evaluation pertaining to a tutor training programme. Conceptualization of evaluation, in this case, is an integration between a conceptualization model as well as a theoretical framework in the form of activity theory. Existing examples of frameworks of programme…

  4. The European Programme Manager

    DEFF Research Database (Denmark)

    Larson, Anne; Bergman, E.; Ehlers, S.

    The publication is a result of a cooperation between organisations in six European countries with the aim to develop a common European education for programme managers. It contains of a description of the different elements of the education together with a number of case-studies from the counties...

  5. The Productive Programmer

    CERN Document Server

    Ford, Neal

    2009-01-01

    Anyone who develops software for a living needs a proven way to produce it better, faster, and cheaper. The Productive Programmer offers critical timesaving and productivity tools that you can adopt right away, no matter what platform you use. Master developer Neal Ford details ten valuable practices that will help you elude common traps, improve your code, and become more valuable to your team.

  6. The effectiveness of Stepping stones Triple P: the design of a randomised controlled trial on a parenting programme regarding children with mild intellectual disability and psychosocial problems versus care as usual

    Science.gov (United States)

    2011-01-01

    Background Children with an intellectual disability are at increased risk of psychosocial problems. This leads to serious restrictions in the daily functioning of the children and to parental stress. Stepping Stones Triple P aims to prevent severe behavioural, emotional and developmental problems in children with a (intellectual) disability by enhancing parenting knowledge and skills, and the self-confidence of parents. This paper aims to describe the design of a study of the effectiveness of parenting counselling using Stepping Stones Triple P compared to Care as Usual. Methods/Design The effects of Stepping Stones Triple P will be studied in a Randomised Controlled Trial. Parents of children aged 5-12 years with an IQ of 50-85 will be recruited from schools. Prior to randomisation, parents complete a screening questionnaire about their child's psychosocial problems and their parenting skills. Subsequently, parents of children with increased levels of psychosocial problems (score on Strengths and Difficulties Questionnaire ≥ 14) will be invited to participate in the intervention study. After obtaining consent, parents will be randomised either to the experimental group (Stepping Stones Triple P) or to Care as Usual. The primary outcome is a change in the child's psychosocial problems according to parents and teachers. The secondary outcome is a change in parenting skills. Data will be collected before the start of the intervention, immediately after the intervention, and six months after. Discussion This paper presents an outline of the background and design of a randomised controlled trial to investigate the effectiveness of Stepping Stones Triple P, which aims to decrease psychosocial problems in children with a mild intellectual disability. Stepping Stones Triple P seems promising, but evidence on its effectiveness for this population is still lacking. This study provides evidence about the effects of this intervention in a community-based population of

  7. The effectiveness of Stepping stones Triple P: the design of a randomised controlled trial on a parenting programme regarding children with mild intellectual disability and psychosocial problems versus care as usual

    Directory of Open Access Journals (Sweden)

    Jansen Daniëlle EMC

    2011-08-01

    Full Text Available Abstract Background Children with an intellectual disability are at increased risk of psychosocial problems. This leads to serious restrictions in the daily functioning of the children and to parental stress. Stepping Stones Triple P aims to prevent severe behavioural, emotional and developmental problems in children with a (intellectual disability by enhancing parenting knowledge and skills, and the self-confidence of parents. This paper aims to describe the design of a study of the effectiveness of parenting counselling using Stepping Stones Triple P compared to Care as Usual. Methods/Design The effects of Stepping Stones Triple P will be studied in a Randomised Controlled Trial. Parents of children aged 5-12 years with an IQ of 50-85 will be recruited from schools. Prior to randomisation, parents complete a screening questionnaire about their child's psychosocial problems and their parenting skills. Subsequently, parents of children with increased levels of psychosocial problems (score on Strengths and Difficulties Questionnaire ≥ 14 will be invited to participate in the intervention study. After obtaining consent, parents will be randomised either to the experimental group (Stepping Stones Triple P or to Care as Usual. The primary outcome is a change in the child's psychosocial problems according to parents and teachers. The secondary outcome is a change in parenting skills. Data will be collected before the start of the intervention, immediately after the intervention, and six months after. Discussion This paper presents an outline of the background and design of a randomised controlled trial to investigate the effectiveness of Stepping Stones Triple P, which aims to decrease psychosocial problems in children with a mild intellectual disability. Stepping Stones Triple P seems promising, but evidence on its effectiveness for this population is still lacking. This study provides evidence about the effects of this intervention in a community

  8. ADS National Programmes: China

    International Nuclear Information System (INIS)

    2015-01-01

    In China the conceptual study of an ADS concept which lasted for about five years ended in 1999. As one project of the National Basic Research Programme of China (973 Programme) in energy domain, which is sponsored by the China Ministry of Science and Technology (MOST), a five year programme of fundamental research of ADS physics and related technology was launched in 2000 and passed national review at the end of 2005. From 2007, another five year 973 Programme Key Technology Research of Accelerator Driven Subcritical System for Nuclear waste Transmutation started. The research activities were focused on HPPA physics and technology, reactor physics of external source driven subcritical assembly, nuclear data base and material study. For HPPA, a high current injector consisting of an ECR ion source, LEBT and an RFQ accelerating structure of 3.5 MeV has been built and were being improved. In reactor physics study, a series of neutron multiplication experimental study has been carrying out. The VENUS I facility has been constructed as the basic experimental platform for neutronics study in ADS blanket. VENUS I a zero power subcritical neutron multiplying assembly driven by external neutron produced by a pulsed neutron generator or 252Cf neutron source. The theoretical, experimental and simulation studies on nuclear data, material properties and nuclear fuel circulation related to ADS are carried out in order to provide the database for ADS system analysis. China Institute of Atomic Energy (CIAE), Institute of High Energy Physics (IHEP) and other Chinese institutes carried out the MOST project together. Besides CIAE, China Academy of Science (CAS) pays more and more attention to Advanced Nuclear Fuel Cycles (ANFC). A large programme of ANFC, including ADS and Th based nuclear fuel cycle, has been launched by CAS

  9. Technology transfer in the Spanish nuclear programme

    International Nuclear Information System (INIS)

    Perez-Naredo, F.

    1983-01-01

    The paper describes the process of technology transfer under the Spanish nuclear programme and its three generations of nuclear power plants during the last 20 years, with special reference to the nine new plants equipped with Westinghouse pressurized water reactors and the rising level of national involvement in these stations. It deals with the development of Westinghouse Nuclear's organization in Spain, referring to its staff and to the manufacturers who supply equipment for the programme, going into particular detail where problems of quality assurance are concerned. In conclusion, it summarizes the present capacity of Spanish industry in various areas connected with the design, manufacture and construction of nuclear power plants. (author)

  10. A Computational Architecture for Programmable Automation Research

    Science.gov (United States)

    Taylor, Russell H.; Korein, James U.; Maier, Georg E.; Durfee, Lawrence F.

    1987-03-01

    This short paper describes recent work at the IBM T. J. Watson Research Center directed at developing a highly flexible computational architecture for research on sensor-based programmable automation. The system described here has been designed with a focus on dynamic configurability, layered user inter-faces and incorporation of sensor-based real time operations into new commands. It is these features which distinguish it from earlier work. The system is cur-rently being implemented at IBM for research purposes and internal use and is an outgrowth of programmable automation research which has been ongoing since 1972 [e.g., 1, 2, 3, 4, 5, 6] .

  11. Concerning background from calorimeter ports

    International Nuclear Information System (INIS)

    Digiacomo, N.J.

    1985-01-01

    Any detector system viewing a port or slit in a calorimeter wall will see, in addition to the primary particles of interest, a background of charged and neutral particles and photons generated by scattering from the port walls and by leakage from incompletely contained primary particle showers in the calorimeter near the port. The signal to noise ratio attainable outside the port is a complex function of the primary source spectrum, the calorimeter and port design and, of course, the nature and acceptance of the detector system that views the port. Rather than making general statements about the overall suitability (or lack thereof) of calorimeter ports, we offer here a specific example based on the external spectrometer and slit of the NA34 experiment. This combination of slit and spectrometer is designed for fixed-target work, so that the primary particle momentum spectrum contains higher momentum particles than expected in a heavy ion colliding beam environment. The results are, nevertheless, quite relevant for the collider case

  12. Executive Summary - Historical background

    International Nuclear Information System (INIS)

    2005-01-01

    matter physics experiments at the High Flux Reactor of The Laue Langevin Institute and the ISIS spallation source at Rutherford-Appleton. Recently, we very actively entered the ICARUS neutrino collaboration and were invited to the PIERRE AUGER collaboration which will search for the highest energies in the Universe. Having close ties with CERN we are very actively engaged in CROSS-GRID, a large computer network project. To better understand the historical background of the INP development, it is necessary to add a few comments on financing of science in Poland. During the 70's and the 80's, research was financed through the so-called Central Research Projects for Science and Technical Development. The advantage of this system was that state-allocated research funds were divided only by a few representatives of the scientific community, which allowed realistic allocation of money to a small number of projects. After 1989 we were able to purchase commercially available equipment, which led to the closure of our large and very experienced electronic workshop. We also considerably reduced our well equipped mechanical shop. During the 90's the reduced state financing of science was accompanied by a newly established Committee of Scientific Research which led to the creation of a system of small research projects. This precluded the development of more ambitious research projects and led to the dispersion of equipment among many smaller laboratories and universities. A large research establishment, such as our Institute, could not develop properly under such conditions. In all, between 1989 and 2004 we reduced our personnel from about 800 to 470 and our infrastructure became seriously undercapitalised. However, with energetic search for research funds, from European rather than national research programs, we hope to improve and modernize our laboratories and their infrastructure in the coming years

  13. Design, implementation and evaluation of a training programme for school teachers in the use of malaria rapid diagnostic tests as part of a basic first aid kit in southern Malawi.

    Science.gov (United States)

    Witek-McManus, Stefan; Mathanga, Don P; Verney, Allison; Mtali, Austin; Ali, Doreen; Sande, John; Mwenda, Reuben; Ndau, Saidi; Mazinga, Charles; Phondiwa, Emmanuel; Chimuna, Tiyese; Melody, David; Roschnik, Natalie; Brooker, Simon J; Halliday, Katherine E

    2015-09-17

    With increasing levels of enrolment, primary schools present a pragmatic opportunity to improve the access of school children to timely diagnosis and treatment of malaria, increasingly recognised as a major health problem within this age group. The expanded use of malaria rapid diagnostic tests (RDTs) and artemisinin combination therapy (ACT) by community health workers (CHWs) has raised the prospect of whether teachers can provide similar services for school children. We describe and evaluate the training of primary school teachers to use a first aid kit containing malaria RDTs and ACT for the diagnosis and treament of uncomplicated malaria in school children in southern Malawi. We outline the development of the intervention as: (1) conception and design, (2) pilot training, (3) final training, and (4) 7-month follow up. The training materials were piloted at a four-day workshop in July 2013 following their design at national stakeholders meetings. The evaluation of the pilot training and materials were assessed in relation to increased knowledge and skill sets using checklist evaluations and questionnaires, the results of which informed the design of a final seven-day training programme held in December 2013. A follow up of trained teachers was carried out in July 2014 following 7 months of routine implementation. A total of 15 teachers were evaluated at four stages: pilot training, two weeks following pilot, final training and seven months following final training. A total of 15 and 92 teachers were trained at the pilot and final training respectively. An average of 93 % of the total steps required to use RDTs were completed correctly at the final training, declining to 87 % after 7 months. All teachers were observed correctly undertaking safe blood collection and handling, accurate RDT interpretation, and correct dispensing of ACT. The most commonly observed errors were a failure to wait 20 minutes before reading the test result, and adding an incorrect volume

  14. Evaluation of a group based cognitive behavioural therapy programme for menstrual pain management in young women with intellectual disabilities: protocol for a mixed methods controlled clinical trial

    Science.gov (United States)

    2014-01-01

    Background Menstrual pain which is severe enough to impact on daily activities is very common amongst menstruating females. Research suggests that menstrual pain which impacts on daily functioning may be even more prevalent amongst those with intellectual disabilities. Despite this, little research attention has focused on pain management programmes for those with intellectual disabilities. The aims of this pilot study were to develop and evaluate a theory-based cognitive behavioural therapy (CBT) programme for menstrual pain management in young women with intellectual disabilities. Methods/Design The study utilised a mixed methods controlled clinical trial to evaluate elements from a CBT programme called Feeling Better (McGuire & McManus, 2010). The Feeling Better programme is a modular, manualised intervention designed for people with an intellectual disability and their carers. The programme was delivered to 36 young women aged 12 – 30 years who have a Mild - Moderate Intellectual Disability, split between two conditions. The treatment group received the Feeling Better intervention and the control group received treatment as usual. To evaluate the effectiveness of the programme, measures were taken of key pain variables including impact, knowledge, self-efficacy and coping. Process evaluation was conducted to examine which elements of the programme were most successful in promoting change. Discussion Participants in the intervention group were expected to report the use of a greater number of coping strategies and have greater knowledge of pain management strategies following participation in the intervention and at three month follow-up, when compared to control group participants. A significant advantage of the study was the use of mixed methods and inclusion of process evaluation to determine which elements of a cognitive behavioural therapy programme work best for individuals with intellectual disabilities. Trial registration Current Controlled Trials

  15. Policy Pathways: Energy Management Programmes for Industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-06

    The IEA Policy Pathway publications provide details on how to implement specific recommendations drawn from the IEA 25 Energy Efficiency Policy Recommendations. This Policy Pathway, jointly produced by the International Energy Agency and the Institute for Industrial Productivity, develops the critical steps for policy makers implementing energy management programmes for industry. Optimising energy use in industry is essential to improve industrial competitiveness and achieve wider societal goals such as energy security, economic recovery and development, climate change mitigation and environmental protection.While there is significant potential to decrease energy consumption in this sector, opportunities to improve energy efficiency are still under-exploited. Energy management programmes have shown to be instrumental in addressing many of the barriers that inhibit wide-scale uptake of energy management in industry. The Policy Pathway builds on lessons learned from country experiences and provides actionable guidance on how to plan and design, implement, evaluate and monitor energy management programmes for industry.

  16. The volunteer programme ‘Night Ravens’:

    DEFF Research Database (Denmark)

    Larsen, Britt Østergaard; Kleif, Helle Bendix; Kolodziejczyk, Christophe

    2015-01-01

    The volunteer programme ‘Night Ravens’ (NR) was founded in Sweden in 1987 and has, over the years, developed into a Scandinavian concept covering large areas of Sweden, Denmark, Norway, Greenland and the Faroe Islands. The NR programme is a crime prevention initiative with adults walking...... the streets at night in identifiable ‘uniforms’ in areas with high activity. The purpose of this study is to evaluate the effects of the NR programme in Denmark based on a volunteer set-up with a less intrusive approach to situational crime prevention than, for instance, hot spot policing. The analyses...... are based on a longitudinal data set containing socio-demographic information on all 585 postcode districts in Denmark and quarterly records of six different categories of reported crimes in the years 2001–2010.We apply a difference-in-difference design and compare development in crime rates in districts...

  17. UKAEA underlying research programme annual report

    International Nuclear Information System (INIS)

    Moon, D.P.

    1990-01-01

    Investment in fundamental research is essential to the success of an organisation such as Atomic Energy Authority (AEA) Technology whose business is the selling of Research and Development (R and D) and the services relating to it. Such research supplies the scientific understanding that underpins the technical expertise of the organisation, develops new skills and techniques, and stimulates technical innovation. The resulting scientific and technical excellence is the hall-mark of a major contract R and D organisation. Fundamental research in the AEA is co-ordinated through the Underlying Research Programme. This Report describes progress made during the financial year 1988/89 within all Technical Areas of the Programme, and additionally summarises the AEA's Underlying Research on the Safe Integral Reactor design and on 'Cold Fusion'. Highlights of recent technical achievements within the Programme are described in a separate brochure. (author)

  18. Donor transplant programme

    International Nuclear Information System (INIS)

    Abu Bakar Sulaiman

    1999-01-01

    The transplantation of organs and tissues from one human to another human has become an essential and well established form of therapy for many types of organ and tissue failure. In Malaysia, kidney, cornea and bone marrow transplantation are well established. Recently, liver, bone and heart transplanation have been performed. Unfortunately, because of the lack of cadaveric organ donation, only a limited number of solid organ transplantation have been performed. The cadaveric organ donor rate in Malaysia is low at less than one per million population. The first tissue transplanted in Malaysia was the cornea which was performed in the early 1970s. At that time and even now the majority of corneas came from Sri Lanka. The first kidney transplant was performed in 1975 from a live related donor. The majority of the 629 kidney transplants done at Hospital Kuala Lumpur to date have been from live related donors. Only 35 were from cadaver donors. Similarly, the liver transplantation programme which started in 1995 are from live related donors. A more concerted effort has been made recently to increase the awareness of the public and the health professionals on organ and tissue donation. This national effort to promote organ and tissue donation seems to have gathered momentum in 1997 with the first heart transplant successfully performed at the National Heart Institute. The rate of cadaveric donors has also increased from a previous average of I to 2 per year to 6 per year in the last one year. These developments are most encouraging and may signal the coming of age of our transplantati on programme. The Ministry of Health in conjunction with various institutions, organizations and professional groups, have taken a number of proactive measures to facilitate the development of the cadaveric organ donation programme. Efforts to increase public awareness and to overcome the negative cultural attitude towards organ donation have been intensified. Equally important are efforts

  19. Climate Ambassador Programmes in Municipalities

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Pedersen, Stine Rahbek

    2016-01-01

    Some Danish municipalities have developed ambassador programmes which generate environmental and climate change mitigation efforts in local public administrations and institutions. This chapter analyses the characteristics and experiences of four ambassador programmes now operating...

  20. Mammographic screening programmes in Europe

    DEFF Research Database (Denmark)

    Giordano, Livia; von Karsa, Lawrence; Tomatis, Mariano

    2012-01-01

    To summarize participation and coverage rates in population mammographic screening programmes for breast cancer in Europe.......To summarize participation and coverage rates in population mammographic screening programmes for breast cancer in Europe....