Chapter 7. Cloning and analysis of natural product pathways.

Science.gov (United States)

Gust, Bertolt

2009-01-01

The identification of gene clusters of natural products has lead to an enormous wealth of information about their biosynthesis and its regulation, and about self-resistance mechanisms. Well-established routine techniques are now available for the cloning and sequencing of gene clusters. The subsequent functional analysis of the complex biosynthetic machinery requires efficient genetic tools for manipulation. Until recently, techniques for the introduction of defined changes into Streptomyces chromosomes were very time-consuming. In particular, manipulation of large DNA fragments has been challenging due to the absence of suitable restriction sites for restriction- and ligation-based techniques. The homologous recombination approach called recombineering (referred to as Red/ET-mediated recombination in this chapter) has greatly facilitated targeted genetic modifications of complex biosynthetic pathways from actinomycetes by eliminating many of the time-consuming and labor-intensive steps. This chapter describes techniques for the cloning and identification of biosynthetic gene clusters, for the generation of gene replacements within such clusters, for the construction of integrative library clones and their expression in heterologous hosts, and for the assembly of entire biosynthetic gene clusters from the inserts of individual library clones. A systematic approach toward insertional mutation of a complete Streptomyces genome is shown by the use of an in vitro transposon mutagenesis procedure.

The Chapter 1 Challenge: Colorado's Contribution 1993.

Science.gov (United States)

Petro, Janice Rose; And Others

An overview is provided of Colorado's participation in Chapter 1, the largest federally funded program designed to provide services to elementary and secondary students. Chapter 1 provides financial assistance to state and local education agencies to meet the special needs of educationally deprived children who reside in areas with high…

Project on Social Architecture in Education. Final Report. Part III: Case Studies. Chapter 9: Arts Co-op: An Experimental High School Program.

Science.gov (United States)

Sullivan, Ellen Wahl

This document contains chapter 9 of the final report of the Project on Social Architecture in Education. Chapter 9 is about a regional experimental high school program for the arts. Several features distinguished Arts Co-op from the other schools in the study. For one, it was a special purpose school, focused on the arts, and not offering a…

American Red Cross Chapter Regions

Data.gov (United States)

Department of Homeland Security — The Regions are part of the national field level structure to support chapters. The Regions role is admistrative as well as provides oversight and program technical...

Energy and wastes. Chapter 1

International Nuclear Information System (INIS)

2002-01-01

In the Chapter 1 'Energy and wastes' it is shown the wastes generation inevitability at power production, because there are no absolutely wasteless technologies. After energy production technologies analysis the data that nuclear energy is most ecologically acceptable at maintenance related radiation safety measures

Chapter 2: Optical Properties of the Water Column

Science.gov (United States)

Kiefer, D. A.; Collins, D. J.

1994-01-01

In this chapter, and in chapter 29, the basic inter-relationship between the flux of radiant energy through the water column and the fixation of carbon by the phytoplankton in the ocean through processes of photosynthesis or primary production will be discussed.

Performance modelling for product development of advanced window systems

DEFF Research Database (Denmark)

Appelfeld, David

properties (chapter 5) of CFSs. The last chapter concludes the thesis and the individual investigations. It is complicated to holistically evaluate the performance of a prototyped system, since simulation programs evaluate standardised products such as aluminium venetian blinds. State-of-the-art tools......The research presented in this doctoral thesis shows how the product development (PD) of Complex Fenestration Systems (CFSs) can be facilitated by computer-based analysis to improve the energy efficiency of fenestration systems as well as to improve the indoor environment. The first chapter defines...... the hypothesis and objectives of the thesis, which is followed by an extended introduction and background. The third chapter briefly suggests the PD framework which is suitable for CFSs. The fourth and fifth chapter refer to the detailed performance modelling of thermal properties (chapter 4) and optical...

Chapter 10:Hardwoods for timber bridges

Science.gov (United States)

James P. Wacker; Ed T. Cesa

2005-01-01

This chapter describes the joint efforts of the Forest Service and the FHWA to administer national programs including research, demonstration bridges, and technology transfer components. Summary information on a number of Forest Service-WIT demonstration bridges constructed with hardwoods is also provided.

Silicate glasses. Chapter 1

International Nuclear Information System (INIS)

Lutze, W.

1988-01-01

This chapter is a survey of world-wide research and development efforts in nuclear waste glasses and its production technology. The principal glasses considered are silicate glasses which contain boron, i.e. borosilicate glass. A historical overview of waste form development programs in nine countries is followed by a summary of the design criteria for borosilicate glass compositions glass compositions. In the sections on glass properties the waste form is characterized in terms of potential alterations under the influence of heat, thermal gradients, radiation, aqueous solutions and combinations thereof. The topics are phase transformations, mechanical properties, radiation effects and chemical durability. The results from studies of volcanic glasses, as natural analogues for borosilicate nuclear waste glasses in order to verify predictions obtained from short-term tests in the laboratory, have been compiled in a special section on natural analogues. A special section on advanced vitrification techniques summarizes the various actual and potential processing schemes and describes the facilities. The literature has been considered until 1985. (author). 430 refs.; 68 figs.; 29 tabs

American Chemical Society Student Affiliates Chapters: More Than Just Chemistry Clubs

Science.gov (United States)

Montes, Ingrid; Collazo, Carmen

2003-10-01

Chemistry educators often examine and implement various instructional techniques, such as mentoring programs, to advance learning objectives and to equip students with analytical and technical skills, as well as the skills required of chemical science professionals. Student organizations, such as an American Chemical Society Student Affiliates (SA) chapter, can create a learning environment for undergraduates by engaging them in activities that develop communication, teamwork and inquiry, analysis, and problem-solving skills within a real-world setting. The environment is student-based, has personal meaning for the learner, emphasizes a process-and-product orientation, and emphasizes evaluation. Participation in SAs enhance the traditional chemistry curriculum, complementing the learning goals and meeting learning objectives that might not otherwise be addressed in the curriculum. In this article we discuss how SA chapters enhance the educational experience of undergraduate chemical science students, help develop new chemistry professionals, and shape enthusiastic and committed future chemical science leaders.

A Playful Programming Products Vs. Programming Concepts Matrix

DEFF Research Database (Denmark)

Allsopp, Benjamin Brink

2017-01-01

to computer program: playful programming. This research also describes a project to bring together different stakeholders (developers, educators, parents and researchers) with a common vocabulary for describing, developing, teaching with and comparing these playful programming products and develops a model......A number of Danish primary schools are involved in pilot studies where 1st to 9th grade students work with Scratch and Lego MindStorms in STEM subjects. These games may become part of the curriculum at these schools. Recent research identifies a category of games and toys that support learning...... to provide educators and researchers involved in pilot studies with an overview of which programming concepts various playful programming products exercise (a playful programming products vs. programming concepts matrix). We also add additional concept specializations and expand on the descriptions...

Assessment of Satellite Ocean Colour Radiometry and Derived Geophysical Products. Chapter 6.1

Science.gov (United States)

Melin, Frederic; Franz, Bryan A.

2014-01-01

Standardization of methods to assess and assign quality metrics to satellite ocean color radiometry and derived geophysical products has become paramount with the inclusion of the marine reflectance and chlorophyll-a concentration (Chla) as essential climate variables (ECV; [1]) and the recognition that optical remote sensing of the oceans can only contribute to climate research if and when a continuous succession of satellite missions can be shown to collectively provide a consistent, long-term record with known uncertainties. In 20 years, the community has made significant advancements toward that objective, but providing a complete uncertainty budget for all products and for all conditions remains a daunting task. In the retrieval of marine water-leaving radiance from observed top-of-atmosphere radiance, the sources of uncertainties include those associated with propagation of sensor noise and radiometric calibration and characterization errors, as well as a multitude of uncertainties associated with the modeling and removal of effects from the atmosphere and sea surface. This chapter describes some common approaches used to assess quality and consistency of ocean color satellite products and reviews the current status of uncertainty quantification in the field. Its focus is on the primary ocean color product, the spectrum of marine reflectance Rrs, but uncertainties in some derived products such as the Chla or inherent optical properties (IOPs) will also be considered.

Chapter 2: Irradiators

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

The chapter 2 presents the subjects: 1) gamma irradiators which includes: Category-I gamma irradiators (self-contained); Category-II gamma irradiators (panoramic and dry storage); Category-III gamma irradiators (self-contained in water); Category-IV gamma irradiators (panoramic and wet storage); source rack for Category-IV gamma irradiators; product transport system for Category-IV gamma irradiators; radiation shield for gamma irradiators; 2) accelerators which includes: Category-I Accelerators (shielded irradiator); Category-II Accelerators (irradiator inside a shielded room); Irradiation application examples.

Calculating Program for Decommissioning Work Productivity based on Decommissioning Activity Experience Data

Energy Technology Data Exchange (ETDEWEB)

Song, Chan-Ho; Park, Seung-Kook; Park, Hee-Seong; Moon, Jei-kwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

KAERI is performing research to calculate a coefficient for decommissioning work unit productivity to calculate the estimated time decommissioning work and estimated cost based on decommissioning activity experience data for KRR-2. KAERI used to calculate the decommissioning cost and manage decommissioning activity experience data through systems such as the decommissioning information management system (DECOMMIS), Decommissioning Facility Characterization DB System (DEFACS), decommissioning work-unit productivity calculation system (DEWOCS). In particular, KAERI used to based data for calculating the decommissioning cost with the form of a code work breakdown structure (WBS) based on decommissioning activity experience data for KRR-2.. Defined WBS code used to each system for calculate decommissioning cost. In this paper, we developed a program that can calculate the decommissioning cost using the decommissioning experience of KRR-2, UCP, and other countries through the mapping of a similar target facility between NPP and KRR-2. This paper is organized as follows. Chapter 2 discusses the decommissioning work productivity calculation method, and the mapping method of the decommissioning target facility will be described in the calculating program for decommissioning work productivity. At KAERI, research on various decommissioning methodologies of domestic NPPs will be conducted in the near future. In particular, It is difficult to determine the cost of decommissioning because such as NPP facility have the number of variables, such as the material of the target facility decommissioning, size, radiographic conditions exist.

Calculating Program for Decommissioning Work Productivity based on Decommissioning Activity Experience Data

International Nuclear Information System (INIS)

Song, Chan-Ho; Park, Seung-Kook; Park, Hee-Seong; Moon, Jei-kwon

2014-01-01

KAERI is performing research to calculate a coefficient for decommissioning work unit productivity to calculate the estimated time decommissioning work and estimated cost based on decommissioning activity experience data for KRR-2. KAERI used to calculate the decommissioning cost and manage decommissioning activity experience data through systems such as the decommissioning information management system (DECOMMIS), Decommissioning Facility Characterization DB System (DEFACS), decommissioning work-unit productivity calculation system (DEWOCS). In particular, KAERI used to based data for calculating the decommissioning cost with the form of a code work breakdown structure (WBS) based on decommissioning activity experience data for KRR-2.. Defined WBS code used to each system for calculate decommissioning cost. In this paper, we developed a program that can calculate the decommissioning cost using the decommissioning experience of KRR-2, UCP, and other countries through the mapping of a similar target facility between NPP and KRR-2. This paper is organized as follows. Chapter 2 discusses the decommissioning work productivity calculation method, and the mapping method of the decommissioning target facility will be described in the calculating program for decommissioning work productivity. At KAERI, research on various decommissioning methodologies of domestic NPPs will be conducted in the near future. In particular, It is difficult to determine the cost of decommissioning because such as NPP facility have the number of variables, such as the material of the target facility decommissioning, size, radiographic conditions exist

Energy intensities of food products. Energie-intensiteiten van voedingsmiddelen

Energy Technology Data Exchange (ETDEWEB)

Kok, R.; Biesiot, W.; Wilting, H.C.

1993-08-01

The energy intensity of a product is the amount of primary energy used per Dutch guilder spent on consumer goods. The energy intensity can differ for each spending and varies from household to household. The aim of this study is to calculate the energy intensities and to provide an overview of the total package of consumer goods, including sociological categories and lifestyles, and the related use of primary energy to produce these goods. Use is made of the Energy Analysis Program (EAP) to calculate the energy intensities. EAP is based on the hybrid method: both the process analysis and the input-output analysis are applied in the model. The data input of the model consists of data from the Budget Survey 1990 of the Dutch Central Bureau of Statistics, which holds data of consumptions from 2767 households. In the chapters 4 to 10 energy intensities are given of the categories bread, pastry and groceries (chapter four), potatoes, vegetables and fruits (chapter five), sugary products and beverages (chapter six), oils and fats (chapter seven), meat, meat products and fish (chapter eight), dairy products (chapter nine), and other food products (chapter ten). The highest energy intensity is found for oils and fats (13.5 MJ per Dutch guilder). The energy intensities for the other products vary from 4.0 to 6.6 MJ/gld. It appears that most of the energy intensive products are products which do not use a large part of the primary energy, mainly because the consumption of these products is low. On the other hand many of the products that consume much of the primary energy (i.e. are consumed much themselves) are relatively energy extensive. The products that show a high consumption rate have relatively low energy intensities. Some of the options to shift towards a more energy extensive food package are the use of fresh products and outside grown products instead of treated products or greenhouse products and a more balanced diet. 5 figs., 18 tabs., 2 appendices, 52 refs.

Adaptation illustrations: Chapter 4

Science.gov (United States)

Maria Janowiak; Patricia Butler; Chris Swanston; Matt St. Pierre; Linda. Parker

2012-01-01

In this chapter, we demonstrate how the Adaptation Workbook (Chapter 3) can be used with the Adaptation Strategies and Approaches (Chapter 2) to develop adaptation tactics for two real-world management issues. The two illustrations in this chapter are intended to provide helpful tips to managers completing the Adaptation Workbook, as well as to show how the anticipated...

Ostomy Home Skills Program

Medline Plus

Full Text Available ... ACS Chapters Find a Chapter Chapter Guidebook Chapter Meetings ACS Events for Chapters Chapter Advocacy International Surgeons ... YFA I Want to Be a YFA Leader Meetings and Events YFA Mentor Programs YFA Speakers Bureau ...

The Chapter I Challenge: Colorado's Contribution 1995.

Science.gov (United States)

Petro, Janice Rose

Chapter I of the Elementary and Secondary Education Act (ESEA) is the largest federally-funded program designed to provide services to elementary and secondary students to meet the special needs of educationally deprived students who reside in areas with high concentrations of low-income families. The 1994-95 school year is the last year of…

Future Prospects: Ionization Radiation Processing Technology. Chapter 12

International Nuclear Information System (INIS)

Rida Tajau

2017-01-01

This final chapter concluded that the ionizing radiation processing technology was potentially used to develop new and advanced products. The new advanced products which been discussed was HBPUA, printing ink, PSA, hydrogel, bioplastic, SWA, CNT, RVNRL and others. With this new innovative technology, it will develop the country's economy and increase the productivity of manufacturing industry, medical, science and technology and also strenghten the social science field.

The chaos cookbook a practical programming guide

CERN Document Server

Pritchard, Joe

2014-01-01

The Chaos Cookbook: A Practical Programming Guide discusses the use of chaos in computer programming. The book is comprised of 11 chapters that tackle various topics relevant to chaos and programming. Chapter 1 reviews the concept of chaos, and Chapter 2 discusses the iterative functions. Chapters 3 and 4 cover differential and Lorenz equations. Chapter 5 talks about strange attractors, while Chapter 6 deals with the fractal link. The book also discusses the Mandelbrot set, and then covers the Julia sets. The other fractal systems and the cellular automata are also explained. The last chapter

Software product quality measurement

OpenAIRE

Godliauskas, Eimantas

2016-01-01

This paper analyses Ruby product quality measures, suggesting three new measures for Ruby product quality measurement tool Rubocop to measure Ruby product quality characteristics defined in ISO 2502n standard series. This paper consists of four main chapters. The first chapter gives a brief view of software product quality and software product quality measurement. The second chapter analyses object oriented quality measures. The third chapter gives a brief view of the most popular Ruby qualit...

Analysis of the results of Federal incentives used to stimulate energy production

Energy Technology Data Exchange (ETDEWEB)

Cone, B.W.; Emery, J.C.; Fassbender, A.G.

1980-06-01

The research program analyzed the Federal incentives used to stimulate nuclear, hydro, coal, gas, oil, and electricity production in order to supply what was learned to the selection of an incentives strategy to induce new energy production from renewable resources. Following the introductory chapter, Chapter 2 examines the problem of estimating effects from a theoretical perspective. Methods of quantifying and identifying the many interactive effects of government actions are discussed. Chapter 3 presents a generic analysis of the result of Federal incentives. Chapters 4 through 9 deal with incentives to energy forms - nuclear, hydro, coal, oil, gas, and electricity. Chapter 10 summarizes the estimated results of the incentives, which are presented in terms of their quantity and price impacts. The incentive costs per million Btu of induced energy production is also discussed. Chapter 11 discusses the parity issue, that is an equivalence between Federal incentives to renewable resources and to traditional energy resources. Any analysis of incentives for solar needs will profit from an analysis of the costs of solar incentives per million Btu compared with those for traditional energy forms. Chapter 12 concludes the analysis, discussing the history of traditional energy incentives as a guide to solar-energy incentives. 216 references, 38 figures, 91 tables.

Tourette Association Chapters

Science.gov (United States)

... com Arizona Email: info@tsa-az.org Website: http://tsa-az.org/ Arkansas Support Group of Northwest ... California/Hawaii Chapter Email: cbrackett2004@yahoo.com Website: http://www.tsanorcal-hawaii.org Southern California Chapter Phone: ...

Basic Physics for Nuclear Medicine. Chapter 1

Energy Technology Data Exchange (ETDEWEB)

Podgorsak, E. B. [Department of Medical Physics, McGill University, Montreal (Canada); Kesner, A. L. [Division of Human Health, International Atomic Energy Agency, Vienna (Austria); Soni, P. S. [Medical Cyclotron Facility, Board of Radiation and Isotope Technology, Bhabha Atomic Research Centre, Mumbai (India)

2014-12-15

The technologies used in nuclear medicine for diagnostic imaging have evolved over the last century, starting with Röntgen’s discovery of X rays and Becquerel’s discovery of natural radioactivity. Each decade has brought innovation in the form of new equipment, techniques, radiopharmaceuticals, advances in radionuclide production and, ultimately, better patient care. All such technologies have been developed and can only be practised safely with a clear understanding of the behaviour and principles of radiation sources and radiation detection. These central concepts of basic radiation physics and nuclear physics are described in this chapter and should provide the requisite knowledge for a more in depth understanding of the modern nuclear medicine technology discussed in subsequent chapters.

Chapter 10: Management recommendations

Science.gov (United States)

Deborah M. Finch; Janie Agyagos; Tracy McCarthey; Robert M. Marshall; Scott H. Stoleson; Mary J. Whitfield

2000-01-01

This chapter was developed over a series of meetings using a group-consensus process. Our recommendations are based on published results, on information compiled in the previous chapters, on expert opinion, and on unpublished data of conservation team members. This chapter is available as temporary guidance until the Recovery Plan for the southwestern willow flycatcher...

Program reference schedule baseline

International Nuclear Information System (INIS)

1986-07-01

This Program Reference Schedule Baseline (PRSB) provides the baseline Program-level milestones and associated schedules for the Civilian Radioactive Waste Management Program. It integrates all Program-level schedule-related activities. This schedule baseline will be used by the Director, Office of Civilian Radioactive Waste Management (OCRWM), and his staff to monitor compliance with Program objectives. Chapter 1 includes brief discussions concerning the relationship of the PRSB to the Program Reference Cost Baseline (PRCB), the Mission Plan, the Project Decision Schedule, the Total System Life Cycle Cost report, the Program Management Information System report, the Program Milestone Review, annual budget preparation, and system element plans. Chapter 2 includes the identification of all Level 0, or Program-level, milestones, while Chapter 3 presents and discusses the critical path schedules that correspond to those Level 0 milestones

Annual review in automatic programming

CERN Document Server

Halpern, Mark I; Bolliet, Louis

2014-01-01

Computer Science and Technology and their Application is an eight-chapter book that first presents a tutorial on database organization. Subsequent chapters describe the general concepts of Simula 67 programming language; incremental compilation and conversational interpretation; dynamic syntax; the ALGOL 68. Other chapters discuss the general purpose conversational system for graphical programming and automatic theorem proving based on resolution. A survey of extensible programming language is also shown.

Systems Biology in Animal Production and Health

DEFF Research Database (Denmark)

for improved animal production and health. The book will contain online resources where additional data and programs can be accessed. Some chapters also come with computer programming codes and example datasets to provide readers hands-on (computer) exercises. This second volume deals with integrated modeling...... and analyses of multi-omics datasets from theoretical and computational approaches and presents their applications in animal production and health as well as veterinary medicine to improve diagnosis, prevention and treatment of animal diseases. This book is suitable for both students and teachers in animal...

New Production Reactors Program Plan

Energy Technology Data Exchange (ETDEWEB)

1990-12-01

Part I of this New Production Reactors (NPR) Program Plan: describes the policy basis of the NPR Program; describes the mission and objectives of the NPR Program; identifies the requirements that must be met in order to achieve the mission and objectives; and describes and assesses the technology and siting options that were considered, the Program's preferred strategy, and its rationale. The implementation strategy for the New Production Reactors Program has three functions: Linking the design, construction, operation, and maintenance of facilities to policies requirements, and the process for selecting options. The development of an implementation strategy ensures that activities and procedures are consistent with the rationale and analysis underlying the Program. Organization of the Program. The strategy establishes plans, organizational structure, procedures, a budget, and a schedule for carrying out the Program. By doing so, the strategy ensures the clear assignment of responsibility and accountability. Management and monitoring of the Program. Finally, the strategy provides a basis for monitoring the Program so that technological, cost, and scheduling issues can be addressed when they arise as the Program proceeds. Like the rest of the Program Plan, the Implementation Strategy is a living document and will be periodically revised to reflect both progress made in the Program and adjustments in plans and policies as they are made. 21 figs., 5 tabs.

New Production Reactors Program Plan

International Nuclear Information System (INIS)

1990-12-01

Part I of this New Production Reactors (NPR) Program Plan: describes the policy basis of the NPR Program; describes the mission and objectives of the NPR Program; identifies the requirements that must be met in order to achieve the mission and objectives; and describes and assesses the technology and siting options that were considered, the Program's preferred strategy, and its rationale. The implementation strategy for the New Production Reactors Program has three functions: Linking the design, construction, operation, and maintenance of facilities to policies requirements, and the process for selecting options. The development of an implementation strategy ensures that activities and procedures are consistent with the rationale and analysis underlying the Program. Organization of the Program. The strategy establishes plans, organizational structure, procedures, a budget, and a schedule for carrying out the Program. By doing so, the strategy ensures the clear assignment of responsibility and accountability. Management and monitoring of the Program. Finally, the strategy provides a basis for monitoring the Program so that technological, cost, and scheduling issues can be addressed when they arise as the Program proceeds. Like the rest of the Program Plan, the Implementation Strategy is a living document and will be periodically revised to reflect both progress made in the Program and adjustments in plans and policies as they are made. 21 figs., 5 tabs

Programming the BBC micro

CERN Document Server

Ferguson, John D; Macari, Louie; Williams, Peter H

1983-01-01

Programming the BBC Micro is a 12-chapter book that begins with a description of the BBC microcomputer, its peripheral, and faults. Subsequent chapters focus on practice in programming, program development, graphics, words, numbers, sound, bits, bytes, and assembly language. The interfacing, file handling, and detailed description of BBC microcomputer are also shown.

Programming Windows Azure

CERN Document Server

Krishnan, Sriram

2010-01-01

Learn the nuts and bolts of cloud computing with Windows Azure, Microsoft's new Internet services platform. Written by a key member of the product development team, this book shows you how to build, deploy, host, and manage applications using Windows Azure's programming model and essential storage services. Chapters in Programming Windows Azure are organized to reflect the platform's buffet of services. The book's first half focuses on how to write and host application code on Windows Azure, while the second half explains all of the options you have for storing and accessing data on the plat

Productivity Sharing Programs: Can They Contribute to Productivity Improvement?

Science.gov (United States)

General Accounting Office, Washington, DC.

Productivity sharing plans were studied to determine how they operate, what benefits result, and whether long-term increases in productivity can be realized through the program. Thirty-six firms were interviewed that had productivity sharing plans. Nine firms that had either rejected adoption of a productivity sharing plan or were still…

SEAFOOD MERCHANDISING, A GUIDE FOR TRAINING PROGRAMS.

Science.gov (United States)

BEAUMONT, JOHN A.

GUIDELINES ARE SUGGESTED FOR THE PROMOTION AND ORGANIZATION OF TRAINING PROGRAMS THAT WILL AID IN THE ORDERLY DISTRIBUTION OF FISHERY PRODUCTS TO THE CONSUMER. THE MATERIAL WAS DEVELOPED AS A RESULT OF A RESEARCH PROJECT CONDUCTED BY THE EDUCATIONAL SERVICE BUREAU AND THE DISTRIBUTIVE EDUCATION SERVICE OF TEMPLE UNIVERSITY. CHAPTERS IN THE GUIDE…

Introduction to stochastic dynamic programming

CERN Document Server

Ross, Sheldon M; Lukacs, E

1983-01-01

Introduction to Stochastic Dynamic Programming presents the basic theory and examines the scope of applications of stochastic dynamic programming. The book begins with a chapter on various finite-stage models, illustrating the wide range of applications of stochastic dynamic programming. Subsequent chapters study infinite-stage models: discounting future returns, minimizing nonnegative costs, maximizing nonnegative returns, and maximizing the long-run average return. Each of these chapters first considers whether an optimal policy need exist-providing counterexamples where appropriate-and the

Interchange. Program Improvement Products Identified through Networking.

Science.gov (United States)

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This catalog lists exemplary field-based program improvement products identified by the Dissemination and Utilization Products and Services Program (D&U) at the National Center for Research in Vocational Education. It is designed to increase awareness of these products among vocational educators and to provide information about them that…

Chapter 11: Sample Design Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

Energy Technology Data Exchange (ETDEWEB)

Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Khawaja, M. Sami [The Cadmus Group, Portland, OR (United States); Rushton, Josh [The Cadmus Group, Portland, OR (United States); Keeling, Josh [The Cadmus Group, Portland, OR (United States)

2017-09-01

Evaluating an energy efficiency program requires assessing the total energy and demand saved through all of the energy efficiency measures provided by the program. For large programs, the direct assessment of savings for each participant would be cost-prohibitive. Even if a program is small enough that a full census could be managed, such an undertaking would almost always be an inefficient use of evaluation resources. The bulk of this chapter describes methods for minimizing and quantifying sampling error. Measurement error and regression error are discussed in various contexts in other chapters.

Chapter 13. Radionuclides in medicine

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with problems connected with using of radionuclides in medicine. Methods of treatment with using of radionuclides are reviewed. Chapter consists of next parts: (1) Remotion of thyroid gland; (2) Treatment of cerebrally tumour in nuclear reactor; (3) Artificial heart

Isotope Production and Distribution Program`s Fiscal Year 1997 financial statement audit

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-27

The Department of Energy Isotope Production and Distribution Program mission is to serve the national need for a reliable supply of isotope products and services for medicine, industry and research. The program produces and sells hundreds of stable and radioactive isotopes that are widely utilized by domestic and international customers. Isotopes are produced only where there is no U.S. private sector capability or other production capacity is insufficient to meet U.S. needs. The Department encourages private sector investment in new isotope production ventures and will sell or lease its existing facilities and inventories for commercial purposes. The Isotope Program reports to the Director of the Office of Nuclear Energy, Science and Technology. The Isotope Program operates under a revolving fund established by the Fiscal Year (FY) 1990 Energy and Water Appropriations Act and maintains financial viability by earning revenues from the sale of isotopes and services and through annual appropriations. The FY 1995 Energy and Water Appropriations Act modified predecessor acts to allow prices charged for Isotope Program products and services to be based on production costs, market value, the needs of the research community, and other factors. Although the Isotope Program functions as a business, prices set for small-volume, high-cost isotopes that are needed for research purposes may not achieve full-cost recovery. As a result, isotopes produced by the Isotope Program for research and development are priced to provide a reasonable return to the U.S. Government without discouraging their use. Commercial isotopes are sold on a cost-recovery basis. Because of its pricing structure, when selecting isotopes for production, the Isotope Program must constantly balance current isotope demand, market conditions, and societal benefits with its determination to operate at the lowest possible cost to U.S. taxpayers. Thus, this report provides a financial analysis of this situation.

Shaking It up: How to Run the Best Club and Chapter Program

Science.gov (United States)

Peterson, Erin

2012-01-01

Alumni clubs and chapters are powerful tools for keeping alumni connected to each other and the institution, gathering insight into what alumni want from their alma mater, and even raising money for the institution. And while alumni leaders do not need to devote a large amount of their budget to create successful groups, they do need to ensure…

National program of struggle against the climate change; Programme national de lutte contre le changement climatique

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-01-17

The French national program of struggle against the climate change deals with the principal sources of pollution i.e. industry, transports, buildings, agriculture and forests wastes, gas refrigerants and power production. The document contains 12 chapters. First chapter concerns the France's responsibilities regarding the climatic change. The following issues are addressed: 1. The phenomenon, the gas releases and the potential impact; 2. The international negotiations and the European engagements; 3. France's effort for pollutant release abatement. The second chapter describes the principal options of the program. It presents: measures, economical constraints, long term structure actions upon offer. The third and the forth chapters deal with the industrial and transport releases and relating abatement measures. Chapter number five concerns the pollutant released in the building sector, i.e. those related to the dwelling houses, the current and proposed measures for reducing the harmful releases. The issue of carbon dioxide, methane and nitrogen oxide releases and absorptions in the sector agriculture-forests is addressed in chapter 6. The contribution of these releases to the greenhouse effect amounts up to 18% (with 11, 33% and 56%, fractions from the three gas emissions, CO{sub 2}, CH{sub 4} and N{sub 2}O, respectively). Measures for release reduction are presented as well as actions to improve the knowledge of the processes. A special addendum gives estimates and the implications the storms of December 1999 had upon the national program. The waste sector contributes by 3% to the greenhouse effect while the power production sector, by 8%. The fraction of release of the three principal pollutant gases are 87%, 12% and 1%, respectively. The results of a scenario based on extant and proposed measures for release abatement are presented for the period 1990-2010. The chapter 8 devoted to the power production sector presents also the results obtained from the

Summer school in Kabardino-Balkaria by BMSTU SPIE Student Chapter

Science.gov (United States)

Chernomyrdin, Nikita V.; Zaytsev, Kirill I.; Gavdush, Arsenii A.; Fokina, Irina N.; Karasik, Valeriy E.; Yurchenko, Stanislav O.

2014-09-01

This summer BMSTU SPIE Student Chapter have decided to visit Kabardino-Balkaria Republic of Caucasus (Russia) and spent there a week with children in a camp. It was called Summer school. We decided to organize it in order to engage talented and curious children in Optics and to show them how science could be funny. Education and entertainment program included such activities as lectures, optical demonstrations, laser games, hiking in the forest, and others. As a result children had a good time outdoors, learned interesting facts about optics and lasers, and of course found new friends who are keen to know more too. Four Chapter members and about 70 children of age 10-16 took part in this event.

Analysis to develop a program for energy-integrated farm systems

Energy Technology Data Exchange (ETDEWEB)

Eakin, D.E.; Clark, M.A.; Inaba, L.K.; Johnson, K.I.

1981-09-01

A program to use renewable energy resources and possibly develop decentralization of energy systems for agriculture is discussed. The purpose of the research presented is to establish the objective of the program and identify guidelines for program development. The program's objective is determined by: (1) an analysis of the technologies that could be utilized to transform renewable farm resources to energy by the year 2000, (2) the quantity of renewable farm resources that are available, and (3) current energy-use patterns. Individual research, development, and demonstration projects are fit into a national program of energy-integrated farm systems on the basis of: (1) market need, (2) conversion potential, (3) technological opportunities, and (4) acceptability. Quantification of these factors for the purpose of establishing program guidelines is conducted using the following four precepts: (1) market need is identified by current use of energy for agricultural production; (2) conversion potential is determined by the availability of renewable resources; and (3) technological opportunities are determined by the state-of-the-art methods, techniques, and processes that can convert renewable resources into farm energy. Each of these factors is analyzed in Chapters 2 to 4. Chapter 5 draws on the analysis of these factors to establish the objective of the program and identify guidelines for the distribution of program funds. Chapter 6 then discusses the acceptability of integrated farm systems, which can not be quantified like the other factors.

SPIE's School Outreach Activity Program (SOAP) by IIT Madras SPIE Student Chapter: a review

Science.gov (United States)

Kalikivayi, Lavanya; Kalikivayi, V.; Udayakumar, K.; Ganesan, A. R.

2014-09-01

One of the important aspects of SPIE is "Community Support and Outreach Education", which should raise awareness and interest in optics and photonics among the targeted communities and school children. Hence as part of SPIE IIT Madras student chapter, we carried out SPIE SOAP, a `School Outreach Activity Program'. Two types of schools were identified, one a high socio-economic status school and the other a low socio-economic status school having a majority of poor children. Optics related scientific experiments were demonstrated in these schools followed by oral quiz session to the students to assess the level of their knowledge before and after the experiments. We also clubbed this activity with "Vision Screening" and distribution of free spectacles for those children who live below poverty line. Out of the 415 children screened, 60.84% eyes were having normal vision, while 39.16% were found to have refractive errors (Myopia 35.78% and Hyperopia 3.38%) where some of them could not even read the board. Treatable eye diseases were also found in 0.72% of the children. The entire activity is been discussed and documented in this paper.

The Department of Energy's Atmospheric Chemistry Program: A critical review

International Nuclear Information System (INIS)

1991-01-01

In response to a request from the Department of Energy's (DOE) Office of Health and Environmental Research (OHER), the Committee on Atmospheric Chemistry has reviewed OHER's Atmospheric Chemistry Program (ACP). This report contains the committee's evaluation and critique arising from that review. The review process included a two-day symposium held at the National Academy of Sciences on September 25 and 26, 1990, that focused on presenting the ACP's current components, recent scientific accomplishments, and scientific plans. Following the symposium, committee members met in a one-day executive session to formulate and outline this report. In undertaking this review, OHER and ACP management requested that the committee attempt to answer several specific questions involving the program's technical capability and productivity, its leadership and organization, and its future direction. These questions are given in the Appendix. This report represents the committee's response to the questions posed in the Appendix. Chapter I explores the committee's view of the role that atmospheric chemistry could and should assume within the DOE and its prospective National Energy Strategy. Chapter 2 assesses the current ACP, Chapter 3 presents recommendations for revising and strengthening it, and Chapter 4 restates the committee's conclusions and recommendations

Magnetic Resonance Imaging. Chapter 15

Energy Technology Data Exchange (ETDEWEB)

Leach, M. O. [The Institute of Cancer Research and The Royal Marsden Hospital, London (United Kingdom)

2014-09-15

In Chapter 14, the principles of nuclear magnetic resonance were presented, along with an introduction to image forming processes. In this chapter, magnetic resonance imaging (MRI) will be reviewed, beginning with the hardware needed and its impact on image quality. The acquisition processes and image reconstruction will be discussed, as well as the artefacts that are possible, with discussion of the important area of safety and bioeffects completing the chapter.

Fundamentals of Atomic and Nuclear Physics. Chapter 1

Energy Technology Data Exchange (ETDEWEB)

Ng, K. -H. [University of Malaya, Kuala Lumpur (Malaysia); Dance, D. R. [Royal Surrey County Hospital, Guildford (United Kingdom)

2014-09-15

Knowledge of the structure of the atom, elementary nuclear physics, the nature of electromagnetic radiation and the production of X rays is fundamental to the understanding of the physics of medical imaging and radiation protection. This, the first chapter of the handbook, summarizes those aspects of these areas which, being part of the foundation of modern physics, underpin the remainder of the book.

Environmental Radioactivity. Chapter 4

International Nuclear Information System (INIS)

Muhamat Omar; Ismail Sulaiman; Zalina Laili

2015-01-01

This chapter explains several things which consist radioactivity measurements, regular and high background radioactivity, radioactive contaminated soil and radioactivity in fertilizers, rocks, building materials, food, water, environments, sediments, flora and fauna. Besides, the natural radioactive gas concentration of radon and toron in the environment also been discussed specifically in this chapter.

Chapter 2: uranium mines and mills

International Nuclear Information System (INIS)

O'Connell, W.J.

1983-03-01

This chapter will be included in a larger ASCE Committee Report. Uranium mining production is split between underground and open pit mines. Mills are sized to produce yellowcake concentrate from hundreds to thousands of tons of ore per day. Miner's health and safety, and environmental protection are key concerns in design. Standards are set by the US Mine Safety and Health Administration, the EPA, NRC, DOT, the states, and national standards organizations. International guidance and standards are extensive and based on mining experience in many nations

General RMP Guidance - Chapter 8: Emergency Response Program

Science.gov (United States)

If you have a Program 2 or 3 process at your facility, 40 CFR Part 68 (risk management program) requires an emergency response program in place if employees respond to some releases involving regulated toxic or flammable substances.

Woody biomass from short rotation energy crops. Chapter 2

Science.gov (United States)

R.S., Jr. Zalesny Jr.; M.W. Cunningham; R.B. Hall; J. Mirck; D.L. Rockwood; J.A. Stanturf; T.A. Volk

2011-01-01

Short rotation woody crops (SRWCs) are ideal for woody biomass production and management systems because they are renewable energy feedstocks for biofuels, bioenergy, and bioproducts that can be strategically placed in the landscape to conserve soil and water, recycle nutrients, and sequester carbon. This chapter is a synthesis of the regional implications of producing...

A supply chain approach to biochar systems [Chapter 2

Science.gov (United States)

Nathaniel M. Anderson; Richard D. Bergman; Deborah S. Page-Dumroese

2017-01-01

Biochar systems are designed to meet four related primary objectives: improve soils, manage waste, generate renewable energy, and mitigate climate change. Supply chain models provide a holistic framework for examining biochar systems with an emphasis on product life cycle and end use. Drawing on concepts in supply chain management and engineering, this chapter presents...

Modification of the fission product inventory program FISPIN

International Nuclear Information System (INIS)

Thomas, R.B.

1977-05-01

The fission product inventory program FISPIN calculates inventories of fission products, actinides and activation products, during and after irradiation in a nuclear reactor, estimates also being given for heat output and radioactive activity of the isotopes. The program has been developed further by making provision for the simulation of fuel reprocessing and in providing subroutines to make the program compatible with nuclear data in a slightly modified ENDF/B4 format. Continuous development of FISPIN over the years has however involved many program alterations and additions, and this has resulted in a generally untidy and cumbersome program. An attempt has therefore been made to improve the basic structure of the program. The subject is dealt with under the following headings: modularisation, direct access data, override facility, selective output, flowcharts, summary. (U.K.)

On line filtering of events in an experiment dedicated to the production of massive muon pairs

International Nuclear Information System (INIS)

Froberger, J.P.

1980-07-01

The NA10 experiment is dedicated to the inclusive production of pairs of massive muons in hadronic collisions, particularly in pion-nucleon collisions. This experiment allows the testing of the Drell-Yan model that describes the production process. The detector is composed of 8 proportional multiwire chambers. This work presents the development of an algorithm able to filter and select adequate events from the data flowing from the detector. Simulations show that the program running on GESPRO system is able to compute the mass of the muon pairs and to take the decision to ban or not the event in less than 20 μs. In the first chapter the author describes the Drell-Yan model. The methodology to analyse data and select adequate events is given in the second chapter. The algorithm is developed in the third chapter and tested with simulations in the fourth chapter. (A.C.)

Introduction to dynamic programming

CERN Document Server

Cooper, Leon; Rodin, E Y

1981-01-01

Introduction to Dynamic Programming provides information pertinent to the fundamental aspects of dynamic programming. This book considers problems that can be quantitatively formulated and deals with mathematical models of situations or phenomena that exists in the real world.Organized into 10 chapters, this book begins with an overview of the fundamental components of any mathematical optimization model. This text then presents the details of the application of dynamic programming to variational problems. Other chapters consider the application of dynamic programming to inventory theory, Mark

North American long-term soil productivity research program

Science.gov (United States)

Allan E. Tiarks; Robert F. Powers; Jerry F. Ragus; Deborah S. Page-Dumroese; Felix Ponder; Douglas M. Stone

1997-01-01

The National Long-term Soil Productivity research program was chartered to address National Forest Management Act concerns over possible losses n soil productivity on national forest lands. The program supports validation of soil quality monitoring standards and process-level productivity research. Summarized results are supplied to forests as collected. National...

National program of struggle against the climate change; Programme national de lutte contre le changement climatique

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-01-17

The French national program of struggle against the climate change deals with the principal sources of pollution i.e. industry, transports, buildings, agriculture and forests wastes, gas refrigerants and power production. The document contains 12 chapters. First chapter concerns the France's responsibilities regarding the climatic change. The following issues are addressed: 1. The phenomenon, the gas releases and the potential impact; 2. The international negotiations and the European engagements; 3. France's effort for pollutant release abatement. The second chapter describes the principal options of the program. It presents: measures, economical constraints, long term structure actions upon offer. The third and the forth chapters deal with the industrial and transport releases and relating abatement measures. Chapter number five concerns the pollutant released in the building sector, i.e. those related to the dwelling houses, the current and proposed measures for reducing the harmful releases. The issue of carbon dioxide, methane and nitrogen oxide releases and absorptions in the sector agriculture-forests is addressed in chapter 6. The contribution of these releases to the greenhouse effect amounts up to 18% (with 11, 33% and 56%, fractions from the three gas emissions, CO{sub 2}, CH{sub 4} and N{sub 2}O, respectively). Measures for release reduction are presented as well as actions to improve the knowledge of the processes. A special addendum gives estimates and the implications the storms of December 1999 had upon the national program. The waste sector contributes by 3% to the greenhouse effect while the power production sector, by 8%. The fraction of release of the three principal pollutant gases are 87%, 12% and 1%, respectively. The results of a scenario based on extant and proposed measures for release abatement are presented for the period 1990-2010. The chapter 8 devoted to the power production sector presents also the results obtained from the

Chapter 6: Conclusions and recommendations

International Nuclear Information System (INIS)

1995-01-01

This chapter provides a brief summary of conclusions with respect to project implementation issues. Furthermore, the chapter contains recommendations on future applications of the modelling system and on water resources management in the project area

Anaerobic Digestion: Mass Balances and Products

DEFF Research Database (Denmark)

Møller, Jacob; Christensen, Thomas Højlund; Jansen, Jes la Cour

2011-01-01

While the basic processes involved in anaerobic digestion of waste are described in Chapter 9.4 and the main digestion technologies are presented in Chapter 9.5, this chapter focuses on mass balances, gas production and energy aspects, environmental emissions and unit process inventories. Underst......While the basic processes involved in anaerobic digestion of waste are described in Chapter 9.4 and the main digestion technologies are presented in Chapter 9.5, this chapter focuses on mass balances, gas production and energy aspects, environmental emissions and unit process inventories...

Secondary School Mathematics, Chapter 13, Perpendiculars and Parallels (I), Chapter 14, Similarity. Student's Text.

Science.gov (United States)

Stanford Univ., CA. School Mathematics Study Group.

The first chapter of the seventh unit in this SMSG series discusses perpendiculars and parallels; topics covered include the relationship between parallelism and perpendicularity, rectangles, transversals, parallelograms, general triangles, and measurement of the circumference of the earth. The second chapter, on similarity, discusses scale…

Japanese contributions to IAEA INTOR workshop, phase two A, part 2, chapter X: nuclear

International Nuclear Information System (INIS)

Tomabechi, Ken; Iida, Hiromasa; Honda, Tsutomu

1985-07-01

This report corresponds to Chapter X of Japanese contribution report to IAEA INTOR Workshop, Phase Two A, Part 2. Data base of the nuclear technology for INTOR is assessed focusing on the four fields; Blanket, Shield, Tritium and Safty. Ongoing R and D programs in these fields are also reviewed and required new programs are discussed. (author)

Packaging and transportation manual. Chapter on the packaging and transportation of hazardous and radioactive waste

International Nuclear Information System (INIS)

1998-03-01

The purpose of this chapter is to outline the requirements that Los Alamos National Laboratory employees and contractors must follow when they package and ship hazardous and radioactive waste. This chapter is applied to on-site, intra-Laboratory, and off-site transportation of hazardous and radioactive waste. The chapter contains sections on definitions, responsibilities, written procedures, authorized packaging, quality assurance, documentation for waste shipments, loading and tiedown of waste shipments, on-site routing, packaging and transportation assessment and oversight program, nonconformance reporting, training of personnel, emergency response information, and incident and occurrence reporting. Appendices provide additional detail, references, and guidance on packaging for hazardous and radioactive waste, and guidance for the on-site transport of these wastes

Packaging and transportation manual. Chapter on the packaging and transportation of hazardous and radioactive waste

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The purpose of this chapter is to outline the requirements that Los Alamos National Laboratory employees and contractors must follow when they package and ship hazardous and radioactive waste. This chapter is applied to on-site, intra-Laboratory, and off-site transportation of hazardous and radioactive waste. The chapter contains sections on definitions, responsibilities, written procedures, authorized packaging, quality assurance, documentation for waste shipments, loading and tiedown of waste shipments, on-site routing, packaging and transportation assessment and oversight program, nonconformance reporting, training of personnel, emergency response information, and incident and occurrence reporting. Appendices provide additional detail, references, and guidance on packaging for hazardous and radioactive waste, and guidance for the on-site transport of these wastes.

Summary and conclusions [Chapter 11

Science.gov (United States)

Daniel G. Neary; John N. Rinne; Alvin L.. Medina

2012-01-01

Summaries and conclusions of each chapter are compiled here to provide a “Quick Reference” guide of major results and recommendations for the UVR. More detail can be obtained from individual chapters.

Gaia DR1 documentation Chapter 6: Variability

Science.gov (United States)

Eyer, L.; Rimoldini, L.; Guy, L.; Holl, B.; Clementini, G.; Cuypers, J.; Mowlavi, N.; Lecoeur-Taïbi, I.; De Ridder, J.; Charnas, J.; Nienartowicz, K.

2017-12-01

This chapter describes the photometric variability processing of the Gaia DR1 data. Coordination Unit 7 is responsible for the variability analysis of over a billion celestial sources. In particular the definition, design, development, validation and provision of a software package for the data processing of photometrically variable objects. Data Processing Centre Geneva (DPCG) responsibilities cover all issues related to the computational part of the CU7 analysis. These span: hardware provisioning, including selection, deployment and optimisation of suitable hardware, choosing and developing software architecture, defining data and scientific workflows as well as operational activities such as configuration management, data import, time series reconstruction, storage and processing handling, visualisation and data export. CU7/DPCG is also responsible for interaction with other DPCs and CUs, software and programming training for the CU7 members, scientific software quality control and management of software and data lifecycle. Details about the specific data treatment steps of the Gaia DR1 data products are found in Eyer et al. (2017) and are not repeated here. The variability content of the Gaia DR1 focusses on a subsample of Cepheids and RR Lyrae stars around the South ecliptic pole, showcasing the performance of the Gaia photometry with respect to variable objects.

Chapter 2. Radionuclides in the biosphere

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with role of radionuclides in the biosphere. Chapter consists of next parts: (1) Natural radionuclides in biosphere; (2) Man-made radionuclides in the biosphere; (3) Ecologically important radionuclides; (4) Natural background; (5) Radiotoxicity and (6) Paths of transfer of radionuclides from the source to human

WIN Chapters: Milestones and Future Plans

Energy Technology Data Exchange (ETDEWEB)

Castro, P.; Pelegrí, M.

2015-07-01

In this paper the WIN Chapters: milestones and future plans are presented. WIN-IAEA has rewarded-in the three last years - to Australia-2014, South-Africa-2013 and Sweden-2012. WIN-Global -specially WiN IAEA- can collaborate a lot with the CTBTO presenting the content of the Treaty on the Non-Proliferation of Nuclear Weapons actually increasing the signatory members in 2015. Historical decisions on NTP are already affecting WiN IAEA. The research reactors or high flux reactors are important in the field of medical applications and other future applications. In Australia women-scientist of OPAL, can become WiN. Between the OPAL applications there is a production of silicon plates to be used in laptops/mobiles. WIN-Europe activities related with the climatic change and with the academic promotion. 2015 is also a very important year due the celebration of 20th Anniversary of WIN-Spain; plans of this Chapter and Conferences of WIN-Global are presented. In addition there are women working in ITER, in some activities in the EU, China, India, Japan, South Korea, USA and Russia both in the academic (R+D) field and into the Industry. (Author)

SeaWiFS Technical Report Series. Volume 42; Satellite Primary Productivity Data and Algorithm Development: A Science Plan for Mission to Planet Earth

Science.gov (United States)

Falkowski, Paul G.; Behrenfeld, Michael J.; Esaias, Wayne E.; Balch, William; Campbell, Janet W.; Iverson, Richard L.; Kiefer, Dale A.; Morel, Andre; Yoder, James A.; Hooker, Stanford B. (Editor);

Database principles programming performance

CERN Document Server

O'Neil, Patrick

2014-01-01

Database: Principles Programming Performance provides an introduction to the fundamental principles of database systems. This book focuses on database programming and the relationships between principles, programming, and performance.Organized into 10 chapters, this book begins with an overview of database design principles and presents a comprehensive introduction to the concepts used by a DBA. This text then provides grounding in many abstract concepts of the relational model. Other chapters introduce SQL, describing its capabilities and covering the statements and functions of the programmi

Chapter 4: Lateral design of cross-laminated timber buildings

Science.gov (United States)

John W. van de Lindt; Douglas Rammer; Marjan Popovski; Phil Line; Shiling Pei; Steven E. Pryor

2013-01-01

Cross-laminated timber (CLT) is an innovative wood product that was developed approximately two decades ago in Europe and has since been gaining in popularity. Based on the experience of European researchers and designers, it is believed that CLT can provide the U.S. market the opportunity to build mid- and high-rise wood buildings. This Chapter presents a summary of...

Chapter 2: Stand-alone Applications - TOPCAT

Science.gov (United States)

Miller, C. J.

Tool for OPerations on Catalogues And Tables or TOPCAT is a graphical viewer for table data. It offers a variety of ways to work with data tables, including a browser for the cell data, viewers for information about table and column metadata, dataset visualization, and even analysis. We discuss a small subset of TOPCAT's functionalities in this chapter. TOPCAT was originally developed as part of the Starlink program in the United Kingdom. It is now maintained by AstroGrid. The program is written in pure Java and available under the GNU General Public License. It is available for download and a version is included in the software distribution accompanying this book. TOPCAT is a GUI interface on top of the STIL library. A command line interface to this library, STILTS, described in Chapter 21 provides scriptable access to many of the capabilities described here. The purpose of this tutorial is to provide an overview of TOPCAT to the novice user. The best place to look for and learn about TOPCAT is the web page maintained by Mark B. Taylor. There, TOPCAT documentation is provided in HTML, PDF, via screen shots, etc. In this chapter we take the user through a few examples that give the general idea of how TOPCAT works. The majority of the functionality of TOPCAT is not included in this short tutorial. Our goal in this tutorial is to lead the reader through an exercise that would result in a publication quality figure (e.g. for a journal article). Specifically, we will use TOPCAT to show how the color-magnitude relation of a galaxy cluster compares to that of all galaxies in the Sloan Digital Sky Survey (York et al. 2000). This diagnostic is used not only in cluster finding, but its linear fit can provide insight into the age and/or metallicity of the oldest galaxies in galaxy clusters (which are some of the oldest galaxies in the Universe). The data we need for this exercise are: 1) the entire spectroscopic galaxy catalog from the SDSS, with galaxy positions, galaxy

76 FR 53631 - BioPreferred Program

Science.gov (United States)

2011-08-29

... title 7 of the Code of Federal Regulations (CFR) to chapter XXXII of title 7 of the CFR. DATES: This..., even though chapter XXXII of the CFR is assigned to OPPM. This direct final rule will relocate all elements of the BioPreferred Program from chapter XXIX of the CFR to chapter XXXII, as OPPM has sole...

Radon Research Program, FY-1990

International Nuclear Information System (INIS)

1991-03-01

The Department of Energy (DOE) Office of Health and Environmental Research (OHER) has established a Radon Research Program with the primary objectives of acquiring knowledge necessary to improve estimates of health risks associated with radon exposure and also to improve radon control. Through the Radon Research Program, OHER supports and coordinates the research activities of investigators at facilities all across the nation. From this research, significant advances are being made in our understanding of the health effects of radon. OHER publishes this annual report to provide information to interested researchers and the public about its research activities. This edition of the report summarizes the activities of program researchers during FY90. Chapter 2 of this report describes how risks associated with radon exposure are estimated, what assumptions are made in estimating radon risks for the general public, and how the uncertainties in these assumptions affect the risk estimates. Chapter 3 examines how OHER, through the Radon Research Program, is working to gather information for reducing the uncertainties and improving the risk estimates. Chapter 4 highlights some of the major findings of investigators participating in the Radon Research Program in the past year. And, finally, Chapter 5 discusses the direction in which the program is headed in the future. 20 figs

Reducing the Risk: Unemployed Migrant Youth and Labour Market Programs. Report.

Science.gov (United States)

Australian Inst. of Multicultural Affairs, Melbourne (Australia).

This 7-chapter report reviews unemployment among migrant and refugee youth in Australia, examines the employment and training programs that exist for this population, identifies unmet needs, and suggests programs or services to meet those needs. An overview of the labor market programs and services available is contained in Chapter 2. Chapters 1…

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Chapter Competition Editorial Board Contact Resources in Surgical Education Newsletters Newsletters Overview Newsletters Overview ACS-AEI Consortium Quarterly ACS Chapter News Cancer Programs Brief Committee on Trauma News The Cutting Edge Philanthropy at Work ...

Collider Dipole Magnet test program from development through production

International Nuclear Information System (INIS)

Bailey, R.E.

1991-01-01

Verification of CDM performance, reliability, and magnet production processes will be accomplished during the development phase of the program. Key features of this program include thorough in process testing of magnet subassemblies, verification of the magnetic field quality, and demonstration of the CDM performance during the formal qualification program. Reliability demonstration of the CDM design includes component tests and an accelerated life test program. Prototype magnet phase will address achievement of magnet performance goals through a program of fabrications, test, analysis, redesign as required and procurement of modified parts for a second fabrication run. This process would be repeated again if necessary, and would conclude with a final design for the production magnets. Production process validation will address the effects that key production processes have upon magnet performance, using the magnets produced during the Preproduction phase

Chapter 1: A Brief Introduction to Lignin Structure

Energy Technology Data Exchange (ETDEWEB)

Katahira, Rui [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Beckham, Gregg T [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Elder, Thomas J. [USDA-Forest Service

2018-04-03

Lignin is an alkyl-aromatic polymer found in the cell walls of terrestrial plants. Lignin provides structure and rigidity to plants, is a natural, highly effective barrier against microbial attack, and enables water and nutrient transport through plant tissues. Depending on the plant species, the constituents of lignin can vary considerably, leading to substantial diversity in lignin chemistry and structure. Despite nearly a century of research and development attempting to convert lignin into valuable products, lignin in most current and planned biorefinery contexts remains underutilized, most often being burned to generate heat and power. However, the drive towards effective lignin valorization processes has witnessed a significant resurgence in the past decade, catalyzed by advances in improved understanding of lignin chemistry, structure, and plasticity in parallel with new catalytic and biological approaches to valorize this important, prevalent biopolymer. As a preface to the subsequent chapters in this book, this chapter briefly highlights the known aspects of lignin structure.

Chapter 19: Catalysis by Metal Carbides and Nitrides

Energy Technology Data Exchange (ETDEWEB)

Schaidle, Joshua A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Nash, Connor P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yung, Matthew M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Chen, Yuan [Pacific Northwest National Laboratory; Carl, Sarah [University of Michigan; Thompson, Levi [University of Michigan

2017-08-09

Early transition metal carbides and nitrides (ETMCNs), materials in which carbon or nitrogen occupies interstitial sites within a parent metal lattice, possess unique physical and chemical properties that motivate their use as catalysts. Specifically, these materials possess multiple types of catalytic sites, including metallic, acidic, and basic sites, and as such, exhibit reactivities that differ from their parent metals. Moreover, their surfaces are dynamic under reaction conditions. This chapter reviews recent (since 2010) experimental and computational investigations into the catalytic properties of ETMCN materials for applications including biomass conversion, syngas and CO2 upgrading, petroleum and natural gas refining, and electrocatalytic energy conversion, energy storage, and chemicals production, and attempts to link catalyst performance to active site identity/surface structure in order to elucidate the present level of understanding of structure-function relationships for these materials. The chapter concludes with a perspective on leveraging the unique properties of these materials to design and develop improved catalysts through a dedicated, multidisciplinary effort.

VBA Programming in Business Economics

DEFF Research Database (Denmark)

Wøhlk, Sanne

This book about Visual Basic for Applications (VBA) is different from other books describing VBA for serveral reasons. It is fine-tuned for business applications and in particular business students and it includes business relevant examples. Already in the first chapters the reader is introduced...... to a variety of different VBA tools, which will enable him or her to write small useful business related programs. In the following chapters the same tools - and more - are presented in a more detailed and rigid way. VBA Programming in Business Economicsis structured as a textbook where each chapter...... projects require knowledge of specific theoretical background, this is provided as short summaries on the books webpage. Besides covering the basic programming, the book also covers programming topics that are more business related: How to use the Excel Solver from within the VBA code, how to perform...

Oil and gas leasing/production program

International Nuclear Information System (INIS)

Heimberger, M.L.

1992-01-01

As the Congress declared in the Outer Continental Shelf Lands Act the natural gas and oil production from the Outer Continental Shelf constitutes an important part of the Nation's domestic energy supply. Federal offshore minerals are administered within the Department of the Interior by the Minerals Management Service (MMS), which provides access to potential new sources of natural gas and oil offshore by conducting lease sales. Each year, on or before March 31, the MMS presents to Congress a fiscal year annual report on the Federal offshore natural gas and oil leasing and production program. In FY 1991, this program was the third largest producer of non-tax revenue for the US Treasury, contributing more than $3 billion. This report presents Federal offshore leasing, sales, production, and exploration activities, and environmental monitoring activities

Forest management and water in the United States [Chapter 13

Science.gov (United States)

Daniel G. Neary

2017-01-01

This chapter outlines a brief history of the United States native forests and forest plantations. It describes the past and current natural and plantation forest distribution (map, area, main species), as well as main products produced (timber, pulp, furniture, etc.). Integrated into this discussion is a characterization of the water resources of the United States and...

The Walla Walla Basin Natural Production Monitoring and Evaluation Project : Progress Report, 1999-2002.

Energy Technology Data Exchange (ETDEWEB)

Contor, Craig R.; Sexton, Amy D.

2003-06-02

The Walla Walla Basin Natural Production Monitoring and Evaluation Project (WWNPME) was funded by Bonneville Power Administration (BPA) as directed by section 4(h) of the Pacific Northwest Electric Power Planning and Conservation Act of 1980 (P. L. 96-501). This project is in accordance with and pursuant to measures 4.2A, 4.3C.1, 7.1A.2, 7.1C.3, 7.1C.4 and 7.1D.2 of the Northwest Power Planning Council's (NPPC) Columbia River Basin Fish and Wildlife Program (NPPC 1994). Work was conducted by the Fisheries Program of the Confederated Tribes of the Umatilla Indian Reservation (CTUIR) under the Walla Walla Basin Natural Production Monitoring and Evaluation Project (WWNPME). Chapter One provides an overview of the entire report and how the objectives of each statement of work from 1999, 2000, 2001, and 2002 contract years are organized and reported. Chapter One also provides background information relevant to the aquatic resources of the Walla Walla River Basin. Objectives are outlined below for the statements of work for the 1999, 2000, 2001 and 2002 contract years. The same objectives were sometimes given different numbers in different years. Because this document is a synthesis of four years of reporting, we gave objectives letter designations and listed the objective number associated with the statement of work for each year. Some objectives were in all four work statements, while other objectives were in only one or two work statements. Each objective is discussed in a chapter. The chapter that reports activities and findings of each objective are listed with the objective below. Because data is often interrelated, aspects of some findings may be reported or discussed in more than one chapter. Specifics related to tasks, approaches, methods, results and discussion are addressed in the individual chapters.

Medical Radioisotopes Production Without A Nuclear Reactor

Energy Technology Data Exchange (ETDEWEB)

Van der Keur, H.

2010-05-15

This report is answering the key question: Is it possible to ban the use of research reactors for the production of medical radioisotopes? Chapter 2 offers a summarized overview on the history of nuclear medicine. Chapter 3 gives an overview of the basic principles and understandings of nuclear medicine. The production of radioisotopes and its use in radiopharmaceuticals as a tracer for imaging particular parts of the inside of the human body (diagnosis) or as an agent in radiotherapy. Chapter 4 lists the use of popular medical radioisotopes used in nuclear imaging techniques and radiotherapy. Chapter 5 analyses reactor-based radioisotopes that can be produced by particle accelerators on commercial scale, other alternatives and the advantages of the cyclotron. Chapter 6 gives an overview of recent developments and prospects in worldwide radioisotopes production. Chapter 7 presents discussion, conclusions and recommendations, and is answering the abovementioned key question of this report: Is it possible to ban the use of a nuclear reactor for the production of radiopharmaceuticals? Is a safe and secure production of radioisotopes possible?.

Chapter 27. Superconductors

International Nuclear Information System (INIS)

Vavra, O.

2007-01-01

In this chapter author deals with superconductors and superconductivity. Different chemical materials used as high-temperature superconductors are presented. Some applications of superconductivity are presented.

Product costing program for wood component manufacturers

Science.gov (United States)

Adrienn Andersch; Urs Buehlmann; Jeff Palmer; Janice K Wiedenbeck; Steve. Lawser

2013-01-01

Accurate and timely product costing information is critically important for companies in planning the optimal utilization of company resources. While an overestimation of product costs can lead to loss of potential business and market share, underestimation of product costs can result in financial losses to the company. This article introduces a product costing program...

Coal Combustion Products Extension Program

Energy Technology Data Exchange (ETDEWEB)

Tarunjit S. Butalia; William E. Wolfe

2006-01-11

This final project report presents the activities and accomplishments of the ''Coal Combustion Products Extension Program'' conducted at The Ohio State University from August 1, 2000 to June 30, 2005 to advance the beneficial uses of coal combustion products (CCPs) in highway and construction, mine reclamation, agricultural, and manufacturing sectors. The objective of this technology transfer/research program at The Ohio State University was to promote the increased use of Ohio CCPs (fly ash, FGD material, bottom ash, and boiler slag) in applications that are technically sound, environmentally benign, and commercially competitive. The project objective was accomplished by housing the CCP Extension Program within The Ohio State University College of Engineering with support from the university Extension Service and The Ohio State University Research Foundation. Dr. Tarunjit S. Butalia, an internationally reputed CCP expert and registered professional engineer, was the program coordinator. The program coordinator acted as liaison among CCP stakeholders in the state, produced information sheets, provided expertise in the field to those who desired it, sponsored and co-sponsored seminars, meetings, and speaking at these events, and generally worked to promote knowledge about the productive and proper application of CCPs as useful raw materials. The major accomplishments of the program were: (1) Increase in FGD material utilization rate from 8% in 1997 to more than 20% in 2005, and an increase in overall CCP utilization rate of 21% in 1997 to just under 30% in 2005 for the State of Ohio. (2) Recognition as a ''voice of trust'' among Ohio and national CCP stakeholders (particularly regulatory agencies). (3) Establishment of a national and international reputation, especially for the use of FGD materials and fly ash in construction applications. It is recommended that to increase Ohio's CCP utilization rate from 30% in 2005 to

Programming languages and operating systems used in data base systems

International Nuclear Information System (INIS)

Radulescu, T.G.

1977-06-01

Some apsects of the use of the programming languages and operating systems in the data base systems are presented. There are four chapters in this paper. In the first chapter we present some generalities about the programming languages. In the second one we describe the use of the programming languages in the data base systems. A classification of the programming languages used in data base systems is presented in the third one. An overview of the operating systems is made in the last chapter. (author)

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 1: Summary

Energy Technology Data Exchange (ETDEWEB)

Rosner, J.L.; et al.

2014-01-23

These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 1 contains the Executive Summary and the summaries of the reports of the nine working groups.

Chapter 13: Assessing Persistence and Other Evaluation Issues Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

Energy Technology Data Exchange (ETDEWEB)

Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Violette, Daniel M. [Navigant, Boulder, CO (United States)

2017-09-01

Addressing other evaluation issues that have been raised in the context of energy efficiency programs, this chapter focuses on methods used to address the persistence of energy savings, which is an important input to the benefit/cost analysis of energy efficiency programs and portfolios. In addition to discussing 'persistence' (which refers to the stream of benefits over time from an energy efficiency measure or program), this chapter provides a summary treatment of these issues -Synergies across programs -Rebound -Dual baselines -Errors in variables (the measurement and/or accuracy of input variables to the evaluation).

Chapter 29: Using an Existing Environment in the VO (IDL)

Science.gov (United States)

Miller, C. J.

The local environment of a Brightest Cluster Galaxy (BCG) can provide insight into the (still not understood) formation process of the BCG itself. BCGs are the most massive galaxies in the Universe, and their formation and evolution are a popular and current research topic (Linden et al. 2006, Bernardi et al. 2006, Lauer et al. 2006). They have been studied for some time (Sandage 1972, Ostriker & Tremaine 1975, White 1976, Thuan & Romanishin 1981, Merritt 1985, Postman and Lauer 1995, among many others). Our goal in this chapter is to study how the local environment can affect the physical and measurable properties of BCGs. We will conduct an exploratory research exercise. In this chapter, we will show how the Virtual Observatory (VO) can be effectively utilized for doing modern scientific research on BCGs. We identify the scientific functionalities we need, the datasets we require, and the service locations in order to discover and access those data. This chapter utilizes IDL's VOlib, which is described in Chapter 24 of this book and is available at http://www.nvo.noao.edu. IDL provides the capability to perform the entire range of astronomical scientific analyses in one environment: from image reduction and analysis to complex catalog manipulations, statistics, and publication quality figures. At the 2005 and 2006 NVO Summer Schools, user statistics show that IDL was the most commonly used programming language by the students (nearly 3-to-1 over languages like IRAF, Perl, and Python). In this chapter we show how the integration of IDL to the VO through VOlib provides even greater capabilities and possibilities for conducting science in the era of the Virtual Observatory. The reader should familiarize themselves with the VOlib libraries before attempting the examples in this tutorial. We first build a research plan. We then discover the service URLs we will need to access the data. We then apply the necessary functions and tools to these data before we can do our

Changing Nature of Formal Service Program Volunteering

NARCIS (Netherlands)

Hustinx, L.; Shachar, I.Y.; Handy, F.; Smith, D.H.; Smith, D.H.; Stebbins, R.A.; Grotz, J.

2016-01-01

Most other chapters in this Handbook focus on volunteering in associations, but this chapter focuses instead mainly on volunteering in volunteer service programs (VSPs). As discussed at length in Handbook Chapter 15, VSPs are essentially volunteer departments of other, larger, controlling, parent

Life story chapters, specific memories and the reminiscence bump

DEFF Research Database (Denmark)

Thomsen, Dorthe Kirkegaard; Pillemer, David B.; Ivcevic, Zorana

2011-01-01

Theories of autobiographical memory posit that extended time periods (here termed chapters) and memories are organised hierarchically. If chapters organise memories and guide their recall, then chapters and memories should show similar temporal distributions over the life course. Previous research...... are over-represented at the beginning of chapters. Potential connections between chapters and the cultural life script are also examined. Adult participants first divided their life story into chapters and identified their most positive and most negative chapter. They then recalled a specific memory from...... demonstrates that positive but not negative memories show a reminiscence bump and that memories cluster at the beginning of extended time periods. The current study tested the hypotheses that (1) ages marking the beginning of positive but not negative chapters produce a bump, and that (2) specific memories...

The psychology of computer programming

CERN Document Server

Weinberg, Gerald Marvin

1998-01-01

This landmark 1971 classic is reprinted with a new preface, chapter-by-chapter commentary, and straight-from-the-heart observations on topics that affect the professional life of programmers. Long regarded as one of the first books to pioneer a people-oriented approach to computing, The Psychology of Computer Programming endures as a penetrating analysis of the intelligence, skill, teamwork, and problem-solving power of the computer programmer. Finding the chapters strikingly relevant to today's issues in programming, Gerald M. Weinberg adds new insights and highlights the similarities and differences between now and then. Using a conversational style that invites the reader to join him, Weinberg reunites with some of his most insightful writings on the human side of software engineering. Topics include egoless programming, intelligence, psychological measurement, personality factors, motivation, training, social problems on large projects, problem-solving ability, programming language design, team formati...

78 FR 40084 - Proposed Requirement-Migrant Education Program Consortium Incentive Grant Program

Science.gov (United States)

2013-07-03

... DEPARTMENT OF EDUCATION 34 CFR Chapter II Proposed Requirement--Migrant Education Program... educational agencies (SEAs) under the Migrant Education Program (MEP) Consortium Incentive Grant (CIG) Program... the interstate or intrastate coordination of migrant education programs by addressing key needs of...

Reflections on the Teaching of Programming

DEFF Research Database (Denmark)

general challenge of  teaching software engineering. The primary issues covered in this part are testing,  extreme programming, and frameworks. These are all issues that are typically covered  in later courses.  Part IV, the last part of the book, consists of two chapters addressing innovative  approaches...... in teaching programming, as well as a  substantial body of publications in the computer science education literature.  The authors are members of the Scandinavian Pedagogy of Programming Network,  and bring together a diverse body of experiences from the Nordic European countries.  The 14 chapters of the book......This state-of-the-art survey, reflecting on the teaching of programming, has been written by a group of primarily Scandinavian researchers and educators with special interest and experience in the subject of programming. The 14 chapters - contributed by 24 authors - present practical experience...

Copper, lead and zinc production

International Nuclear Information System (INIS)

Ayers, J.; Ternan, S.

2001-01-01

This chapter provides information on the by-products and residues generated during the production of copper, lead and zinc. The purpose of this chapter is to describe by-products and residues which are generated, how these may be avoided or minimised, and available options for the utilization and management of residues. (author)

The Helping Book: Fourth Grade. For Parents of ECIA, Chapter 1. Bulletin 1709.

Science.gov (United States)

Louisiana State Dept. of Education, Baton Rouge.

Intended for parents of fourth grade children who are participating in Chapter 1 programs that support basic skills education, the learning activities in this booklet give children practice with reading and writing. Among the language skills covered in the activities are (1) vocabulary (in context, synonyms, antonyms, homophones, homographs,…

106-17 Telemetry Standards Chapter 1

Science.gov (United States)

2017-07-01

Telemetry Standards, RCC Standard 106-17 Chapter 1, July 2017 1-1 CHAPTER 1 Introduction The Telemetry Standards address the here-to-date...for Federal Radio Frequency Management . Copies of that manual may be obtained from: Executive Secretary, Interdepartmental Radio Advisory Committee

MODIS-derived terrestrial primary production [chapter 28

Science.gov (United States)

Maosheng Zhao; Steven Running; Faith Ann Heinsch; Ramakrishna Nemani

2011-01-01

Temporal and spatial changes in terrestrial biological productivity have a large impact on humankind because terrestrial ecosystems not only create environments suitable for human habitation, but also provide materials essential for survival, such as food, fiber and fuel. A recent study estimated that consumption of terrestrial net primary production (NPP; a list of...

The USC-OSA Student Chapter: goals and benefits for the optics community

Science.gov (United States)

Gómez-Varela, A. I.; Gargallo, Ana; González Núñez, Héctor; Delgado-García, Tamara; Almaguer-Gómez, Citlalli; Cambronero-López, F.; Flores-Arias, M. T.

2014-07-01

The USC-OSA Student Chapter has been constituted in March 2013 by members of the University of Santiago de Compostela (USC) in Spain and sponsored by The Optical Society of America (OSA). It is formed by five graduate and one undergraduate students with the common interest in Optics and Photonics research and a professor of the USC is also involved as a faculty advisor. We decided to start this group with the aim of involving kids, precollege and undergraduate students in the world of Optics and Photonics. The activities that the USC-OSA Student Chapter members intend to realize are mainly educational tasks for the spreading of knowledge in Photonics by means of basic experiments, demonstrations and lectures by leading researchers and teachers. Most of the needed resources to accomplish these activities are provided by the OSA, such as educational posters and a portable kit for demonstrating Optics to students. At this moment the USC-OSA Student Chapter is carrying out several activities, as educational journeys at the Santiago de Compostela University Hospital Complex (CHUS), where hospitalized children can approach to Optics through some simple experiments and games. A teaching program is also being organized in collaboration with Galician secondary schools in order to show students the importance and uses of Optics and Photonics and to arouse their interest in this field, as well as encouraging them to develop their scientific thinking. Another activity will take place in November during the Science Week, which includes a program of lectures targeted to undergraduate students and an exposition of several demonstrations

Object-oriented graphics programming in C++

CERN Document Server

Stevens, Roger T

2014-01-01

Object-Oriented Graphics Programming in C++ provides programmers with the information needed to produce realistic pictures on a PC monitor screen.The book is comprised of 20 chapters that discuss the aspects of graphics programming in C++. The book starts with a short introduction discussing the purpose of the book. It also includes the basic concepts of programming in C++ and the basic hardware requirement. Subsequent chapters cover related topics in C++ programming such as the various display modes; displaying TGA files, and the vector class. The text also tackles subjects on the processing

Melt inclusions: Chapter 6

Science.gov (United States)

,; Lowenstern, J. B.

2014-01-01

Melt inclusions are small droplets of silicate melt that are trapped in minerals during their growth in a magma. Once formed, they commonly retain much of their initial composition (with some exceptions) unless they are re-opened at some later stage. Melt inclusions thus offer several key advantages over whole rock samples: (i) they record pristine concentrations of volatiles and metals that are usually lost during magma solidification and degassing, (ii) they are snapshots in time whereas whole rocks are the time-integrated end products, thus allowing a more detailed, time-resolved view into magmatic processes (iii) they are largely unaffected by subsolidus alteration. Due to these characteristics, melt inclusions are an ideal tool to study the evolution of mineralized magma systems. This chapter first discusses general aspects of melt inclusions formation and methods for their investigation, before reviewing studies performed on mineralized magma systems.

Chapter 08: Comments on, and additional information for, wood identification

Science.gov (United States)

Alex C. Wiedenhoeft

2011-01-01

This manual has described the theory of identification (Chapter 1), the botanical basis of wood structure (Chapter 2), the use of a hand lens (Chapter 3), how to use cutting tools to prepare wood for observation with a lens (Chapter 4), and the characters used in hand lens wood identification (Chapter 5) before leading you through an identification key (Chapter 6) and...

May 2013 Council of Chapter Representatives Notes

Directory of Open Access Journals (Sweden)

Robbins RA

2013-05-01

Full Text Available No abstract available. Article truncated at 150 words. The Council of Chapter Representatives met in conjunction with the ATS meeting in Philadelphia on May 18, 2012.Roll Call. The meeting was called to order at 11 AM. Representatives from Arizona, California, DC Metro, Louisiana, Michigan, New Mexico, New York, Oregon, and Rhode Island were in attendance, and by telephone from Washington.Chapter Updates. Information on chapter activities and a chapter brochure. There are currently 19 active chapters. Most are having annual meetings. Advocacy. Gary Ewart from ATS Government Relations gave a presentation on Washington activities. Highlights included activities on the SGR, a number of air pollution regulations and a letter campaign advocating regulation of cigars. ATS President 2013-14-vision for the coming year. Patrician Finn gave a summary of what she hopes to accomplish over the next year. The theme of her presidency will be health equality. ATS Executive Director-update. Steve Crane gave a positive presentation on the …

Annual Report of the Integrated Status and Effectiveness Monitoring Program: Fiscal Year 2008

Energy Technology Data Exchange (ETDEWEB)

Terraqua, Inc. (Wauconda, WA)

2009-07-20

This document was created as an annual report detailing the accomplishments of the Integrated Status and Effectiveness Monitoring Program (ISEMP) in the Upper Columbia Basin in fiscal year 2008. The report consists of sub-chapters that reflect the various components of the program. Chapter 1 presents a report on programmatic coordination and accomplishments, and Chapters 2 through 4 provide a review of how ISEMP has progressed during the 2008 fiscal year in each of the pilot project subbasins: the John Day (Chapter 2), Wenatchee/Entiat (Chapter 3) and Salmon River (Chapter 4). Chapter 5 presents a report on the data management accomplishments in 2008.

Calculation of Complexity Costs – An Approach for Rationalizing a Product Program

DEFF Research Database (Denmark)

Hansen, Christian Lindschou; Mortensen, Niels Henrik; Hvam, Lars

2012-01-01

This paper proposes an operational method for rationalizing a product program based on the calculation of complexity costs. The method takes its starting point in the calculation of complexity costs on a product program level. This is done throughout the value chain ranging from component invento...... of a product program. These findings represent an improved decision basis for the planning of reactive and proactive initiatives of rationalizing a product program.......This paper proposes an operational method for rationalizing a product program based on the calculation of complexity costs. The method takes its starting point in the calculation of complexity costs on a product program level. This is done throughout the value chain ranging from component...... inventories at the factory sites, all the way to the distribution of finished goods from distribution centers to the customers. The method proposes a step-wise approach including the analysis, quantification and allocation of product program complexity costs by the means of identifying of a number...

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 4: Cosmic Frontier

Energy Technology Data Exchange (ETDEWEB)

Feng, J. L. [MIT, LNS; Ritz, S. [UC, Santa Cruz; Beatty, J. J. [Ohio State U.; Buckley, J. [Washington U., Seattle; Cowen, D. F. [Penn State U.; Cushman, P. [Minnesota U.; Dodelson, S. [Chicago U., Astron. Astrophys. Ctr.; Galbiati, C. [PNPI, CSTD; Honscheid, K. [Ohio State U.; Hooper, D. [Chicago U., Astron. Astrophys. Ctr.; Kaplinghat, M. [UC, Irvine; Kusenko, A. [Unlisted; Matchev, K. [Florida U.; McKinsey, D. [Yale U.; Nelson, A. E. [Washington U., Seattle; Olinto, A. [Chicago U., EFI; Profumo, S. [UC, Santa Cruz; Robertson, H. [Washington U., Seattle; Rosenberg, L. [Unlisted; Sinnis, G. [Los Alamos; Tait, T. M.P. [UCLA

2014-01-23

These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 4, on the Cosmic Frontier, discusses the program of research relevant to cosmology and the early universe. This area includes the study of dark matter and the search for its particle nature, the study of dark energy and inflation, and cosmic probes of fundamental symmetries.

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 3: Energy Frontier

Energy Technology Data Exchange (ETDEWEB)

Brock, R.; et al.

2014-01-23

These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 3, on the Energy Frontier, discusses the program of research with high-energy colliders. This area includes experiments on the Higgs boson, the electroweak and strong interactions, and the top quark. It also encompasses direct searches for new particles and interactions at high energy.

Using Kolb's Experiential Learning Cycle in Chapter Presentations

Science.gov (United States)

Stokes-Eley, Stephanie

2007-01-01

Student-led chapter presentations provide an excellent opportunity for instructors to evaluate a student's comprehension of the assigned chapter, as well as the student's ability to present and convey information in a public forum. Although several instructors realize the benefits of requiring students to complete chapter presentations either as…

Working Together. Multi Purpose Programs for Troubled Youth.

Science.gov (United States)

Kuhn, Deborah; Pressman, Harvey

This paper provides program planners with some innovative ideas that have been used in all phases of various multi-service programs for high-risk youth. Chapter 2 focuses on strategies for assessing participant needs. Diagnosis, learning disabilities and remediation, and staff training are discussed. Chapter 3 considers elimination of service gaps…

External tank program productivity and quality enhancements - A case study

Science.gov (United States)

Locke, S. R.

1988-01-01

The optimization of the Manned Space Systems productivity and quality enhancement program is described. The guidelines and standards of the program and the roles played in it by various employee groups are addressed. Aspects of the program involving job/organization redefinition, production and planning in automation, and artificial intelligence and robotics are examined.

Virtual reality excursions with programs in C

CERN Document Server

Watkins, Christopher D

1994-01-01

Virtual Reality Excursions with Programs in C provides the history, theory, principles and an account of the milestones in the development of virtual reality technology.The book is organized into five chapters. The first chapter explores the applications in the vast field of virtual reality. The second chapter presents a brief history of the field and its founders. Chapter 3 discusses human perception and how it works. Some interesting notes and much of the hot debate in the field are covered in Chapter 4. The fifth chapter describes many of the complexities involved in implementing virtual en

Secretary's annual report to Congress. Volume I. Posture statement, outlook and program review

Energy Technology Data Exchange (ETDEWEB)

None

1981-01-01

Activities of all elements of the Department of Energy (DOE) except those of FERC are reported. Chapter I, the Posture Statement, gives an overview of the policies, programs, and strategies of DOE. It describes the national energy policy and its effects, sets out the current state of energy supply and demand in the US and around the world, describes the present assessment of future energy availability, and outlines the strategy for 1982. Additional chapters detail the major programs in the following Offices or Assistant Secretaryships: Conservation, Fossil Fuel, Nuclear Energy, Renewable Energy Resources, Electric Energy Systems and Energy Storage, Environment, Energy Supporting Research, Energy Production and Power Marketing, Energy Information, Economic Regulation, General Science, Defense, International Programs, Nuclear Non-Proliferation, Energy Contingency Planning, and Administration. Information is included in appendices on foreign direct investment in US energy sources and supplies for 1979, exports of energy resources by foreign companies, major recipients of DOE funding, DOE actions taken regarding disclosure of energy assets by DOE employees, and financial assistance programs. (MCW)

Forschungszentrum Karlsruhe Technik und Umwelt. Research and development program 2002

International Nuclear Information System (INIS)

2001-01-01

The five main fields of research and the activities under the R and D program 2002 are explained in great detail in five chapters with the following captions: 1. ENVIRONMENT. Programs: - Sustainable development, energy and environmental engineering (UMWELT). - Earth atmosphere and climate research (ATMO). 2. PUBLIC HEALTH. Programs: - Biomedical research (BIOMED). - Medical engineering (MEDTECH). 3. ENERGY. Programs: - Thermonuclear fusion (FUSION). - Nuclear safety (NUKLEAR). 4. KEY TECHNOLOGIES. Programs: - Microsystems engineering (MIKRO). - Nanotechnology (NANO). - Materials science (MATERIAL). - Chemical process engineering (CHEMIE). - Superconductivity (SUPRA). 5. MATTER and STRUCTURE. Program: The structure of matter (STRUKTUR). The sixth chapter presents cross-cutting activities under the program: Technology transfer and marketing (TTM). The concluding chapter lists and briefly presents the activities of the scientific and technical institutes of the Karlsruhe Research Center. (CB) [de

Chapter 2. Theoretical aspects of aluminium production

International Nuclear Information System (INIS)

Yanko, E.A.; Kabirov, Sh.O.; Safiev, Kh.; Azizov, B.S.; Mirpochaev, Kh.A.

2011-01-01

This article is devoted to theoretical aspects of aluminium production. Thus, the electrochemistry of electrolysis process, calculation of base industrial indicators of aluminium electrolytic cell, and processes occurring on anode and cathode were considered. Factors, which increase the current output and electrolytic cell productivity were studied. The side effects, including anode effect, sodium extraction on cathode, aluminium dissolution in the electrolyte, aluminium carbide formation, and influence of admixtures in the electrolyte were studied as well.

Representational State Transfer a its support in programming language Java

OpenAIRE

Tran, Dac Ngoc Lam

2010-01-01

This bachelor thesis focuses on explaining the term Representational State Transfer (REST) and its usage in the programming language Java. The first chapter introduces readers with the theoretical basis of REST, its presence in HTTP protocol and its pros and cons in general. The second chapter is dedicated to the application of principles mentioned in the first chapter. On two different programs, a client and a server, I go through the analysis and programming the REST layer. After this chapt...

Seleucid, Demotic and Mediterranean mathematics versus Chapters VIII and IX of the Nine Chapters: accidental or significant similarities?

DEFF Research Database (Denmark)

Høyrup, Jens

Similarities of geometrical diagrams and arithmetical structures of problems have often been taken as evidence of transmission of mathematical knowledge or techniques between China and “the West”. Confronting on one hand some problems from Chapter VIII of the Nine Chapters with comparable problems...... known from Ancient Greek sources, on the other a Seleucid collection of problems about rectangles with a subset of the triangle problems from Chapter IX, it is concluded, (1) that transmission of some arithmetical riddles without method – not “from Greece” but from a transnational community of traders...

On optimization of power production

Energy Technology Data Exchange (ETDEWEB)

Feltenmark, S.

1997-01-01

Short-term optimization of power production is treated. It concerns the problem of determining a production schedule for a power system, which minimizes the total cost of production, while satisfying various constraints. The thesis consists of an introductory chapter, four chapters that each concerns a specific problem area (economic dispatch, unit commitment, hydro power planning and cogeneration optimization), plus a chapter with relevant theory. The emphasis of the thesis is on the mathematical structures that arise in problems in this field, and how to exploit them algorithmically. A recurring theme is convexification, either implicit, by dualization, or explicit, as in our approach to hydro power optimization. 134 refs

Chapter 6 – Computer-Aided Molecular Design and Property Prediction

DEFF Research Database (Denmark)

Gani, Rafiqul; Zhang, L.; Kalakul, Sawitree

2017-01-01

for the initial stages of the design/development process. Therefore, computer-aided molecular design and property prediction techniques are two topics that play important roles in chemical product design, analysis, and application. In this chapter, an overview of the concepts, methods, and tools related......Today's society needs many chemical-based products for its survival, nutrition, health, transportation, agriculture, and the functioning of processes. Chemical-based products have to be designed/developed in order to meet these needs, while at the same time, they must be innovative and sustainable...... to these two topics are given. In addition, a generic computer-aided framework for the design of molecules, mixtures, and blends is presented. The application of the framework is highlighted for molecular products through two case studies involving the design of refrigerants and surfactants....

Execution of Educational Mechanical Production Programs for School Children

Science.gov (United States)

Itoh, Nobuhide; Itoh, Goroh; Shibata, Takayuki

The authors are conducting experience-based engineering educational programs for elementary and junior high school students with the aim to provide a chance for them to experience mechanical production. As part of this endeavor, we planned and conducted a program called “Fabrication of Original Magnet Plates by Casting” for elementary school students. This program included a course for leading nature laws and logical thinking method. Prior to the program, a preliminary program was applied to school teachers to get comments and to modify for the program accordingly. The children responded excellently to the production process which realizes their ideas, but it was found that the course on natural laws and logical methods need to be improved to draw their interest and attention. We will continue to plan more effective programs, deepening ties with the local community.

Chapter 9: Electronics

International Nuclear Information System (INIS)

Grupen, Claus; Shwartz, Boris A.

2006-01-01

Sophisticated front-end electronics are a key part of practically all modern radiation detector systems. This chapter introduces the basic principles and their implementation. Topics include signal acquisition, electronic noise, pulse shaping (analog and digital), and data readout techniques

The Texas A&M Radioisotope Production and Radiochemistry Program

International Nuclear Information System (INIS)

Akabani, Gamal

2016-01-01

The main motivation of the project at Texas A&M University was to carry out the production of critically needed radioisotopes used in medicine for diagnostics and therapy, and to establish an academic program in radionuclide production and separation methods. After a lengthy battle with the Texas A&M University Radiation Safety Office, the Texas Department of State Health Services granted us a license for the production of radionuclides in July 2015, allowing us to work in earnest in our project objectives. Experiments began immediately after licensing, and we started the assembly and testing of our target systems. There were four analytical/theoretical projects and two experimental target systems. These were for At-211 production and for Zn-62/Cu-62 production. The theoretical projects were related to the production of Mo-99/Tc-99m using a) a subcritical aqueous target system and b) production of Tc-99m from accelerator-generated Mo-99 utilizing a photon-neutron interaction with enriched Mo-100 targets. The two experimental projects were the development of targetry systems and production of At-211 and Zn-62/Cu-62 generator. The targetry system for At-211 has been tested and production of At-211 is chronic depending of availability of beam time at the cyclotron. The installation and testing of the targetry system for the production of Zn-62/Cu-62 has not been finalized. A description of the systems is described. The academic program in radionuclide production and separation methods was initiated in the fall of 2011 and, due to the lack of a radiochemistry laboratory, it was suspended. We expect to re-start the academic program at the Texas A&M Institute for Preclinical Studies under the Molecular Imaging Program.

The Texas A&M Radioisotope Production and Radiochemistry Program

Energy Technology Data Exchange (ETDEWEB)

Akabani, Gamal [Texas A & M Univ., College Station, TX (United States)

2016-08-31

The main motivation of the project at Texas A&M University was to carry out the production of critically needed radioisotopes used in medicine for diagnostic and therapy, and to establish an academic program in radionuclide production and separation methods. After a lengthy battle with the Texas A&M University Radiation Safety Office, the Texas Department of State Health Services granted us a license for the production of radionuclides in July 2015, allowing us to work in earnest in our project objectives. Experiments began immediately after licensing, and we started the assembly and testing of our target systems. There were four analytical/theoretical projects and two experimental target systems. These were for At-211 production and for Zn- 62/Cu-62 production. The theoretical projects were related to the production of Mo-99/Tc-99m using (a) a subcritical aqueous target system and (b) production of Tc-99m from accelerator-generated Mo-99 utilizing a photon-neutron interaction with enriched Mo-100 targets. The two experimental projects were the development of targetry systems and production of At-211 and Zn-62/Cu-62 generator. The targetry system for At-211 has been tested and production of At-211 is chronic depending of availability of beam time at the cyclotron. The installation and testing of the targetry system for the production of Zn-62/Cu-62 has not been finalized. A description of the systems is described. The academic program in radionuclide production and separation methods was initiated in the fall of 2011; due to the lack of a radiochemistry laboratory, it was suspended. We expect to re-start the academic program at the Texas A&M Institute for Preclinical Studies under the Molecular Imaging Program.

The Texas A&M Radioisotope Production and Radiochemistry Program

International Nuclear Information System (INIS)

Akabani, Gamal

2016-01-01

The main motivation of the project at Texas A&M University was to carry out the production of critically needed radioisotopes used in medicine for diagnostic and therapy, and to establish an academic program in radionuclide production and separation methods. After a lengthy battle with the Texas A&M University Radiation Safety Office, the Texas Department of State Health Services granted us a license for the production of radionuclides in July 2015, allowing us to work in earnest in our project objectives. Experiments began immediately after licensing, and we started the assembly and testing of our target systems. There were four analytical/theoretical projects and two experimental target systems. These were for At-211 production and for Zn- 62/Cu-62 production. The theoretical projects were related to the production of Mo-99/Tc-99m using (a) a subcritical aqueous target system and (b) production of Tc-99m from accelerator-generated Mo-99 utilizing a photon-neutron interaction with enriched Mo-100 targets. The two experimental projects were the development of targetry systems and production of At-211 and Zn-62/Cu-62 generator. The targetry system for At-211 has been tested and production of At-211 is chronic depending of availability of beam time at the cyclotron. The installation and testing of the targetry system for the production of Zn-62/Cu-62 has not been finalized. A description of the systems is described. The academic program in radionuclide production and separation methods was initiated in the fall of 2011; due to the lack of a radiochemistry laboratory, it was suspended. We expect to re-start the academic program at the Texas A&M Institute for Preclinical Studies under the Molecular Imaging Program.

The Texas A&M Radioisotope Production and Radiochemistry Program

Energy Technology Data Exchange (ETDEWEB)

Akabani, Gamal [Texas A & M Univ., College Station, TX (United States). Dept. of Nuclear Engineering. Dept. of Veterinary Integrative Biosciences

2016-10-28

The main motivation of the project at Texas A&M University was to carry out the production of critically needed radioisotopes used in medicine for diagnostics and therapy, and to establish an academic program in radionuclide production and separation methods. After a lengthy battle with the Texas A&M University Radiation Safety Office, the Texas Department of State Health Services granted us a license for the production of radionuclides in July 2015, allowing us to work in earnest in our project objectives. Experiments began immediately after licensing, and we started the assembly and testing of our target systems. There were four analytical/theoretical projects and two experimental target systems. These were for At-211 production and for Zn-62/Cu-62 production. The theoretical projects were related to the production of Mo-99/Tc-99m using a) a subcritical aqueous target system and b) production of Tc-99m from accelerator-generated Mo-99 utilizing a photon-neutron interaction with enriched Mo-100 targets. The two experimental projects were the development of targetry systems and production of At-211 and Zn-62/Cu-62 generator. The targetry system for At-211 has been tested and production of At-211 is chronic depending of availability of beam time at the cyclotron. The installation and testing of the targetry system for the production of Zn-62/Cu-62 has not been finalized. A description of the systems is described. The academic program in radionuclide production and separation methods was initiated in the fall of 2011 and, due to the lack of a radiochemistry laboratory, it was suspended. We expect to re-start the academic program at the Texas A&M Institute for Preclinical Studies under the Molecular Imaging Program.

RMP Guidance for Warehouses - Chapter 8: Emergency Response Program

Science.gov (United States)

Implementing an emergency response program along with your risk management plan may be required if you have at least one Program 2 or 3 process in place, and if your employees will respond to some releases involving regulated toxic or flammable substances.

Reflections on the Teaching of Programming

DEFF Research Database (Denmark)

-line tutorials, object-oriented programming and Java, the BlueJ environment to introduce programming, model-driven programming as opposed to the prevailing language-driven approach, teaching software engineering, testing, extreme programming, frameworks, feedback and assessment, active learning, technology.......  Part II consists of four chapters that specifically address issues related to  introductory courses on object-oriented programming ⎯the currently most prevailing  approach to introductory programming. The primary issues covered are transitioning  to object-oriented programming and Java, the use...... general challenge of  teaching software engineering. The primary issues covered in this part are testing,  extreme programming, and frameworks. These are all issues that are typically covered  in later courses.  Part IV, the last part of the book, consists of two chapters addressing innovative  approaches...

Graphic Interface for LCP2 Optimization Program

DEFF Research Database (Denmark)

Nicolae, Taropa Laurentiu; Gaunholt, Hans

1998-01-01

This report provides information about the software interface that is programmed for the Optimization Program LCP2. The first part is about the general description of the program followed by a guide for using the interface. The last chapters contain a discussion about problems or futute extension...... of the project. The program is written in Visual C++5.0 on a Windows NT4.0 operating system.......This report provides information about the software interface that is programmed for the Optimization Program LCP2. The first part is about the general description of the program followed by a guide for using the interface. The last chapters contain a discussion about problems or futute extensions...

Fundamentals of Dosimetry. Chapter 3

Energy Technology Data Exchange (ETDEWEB)

Yoshimura, E. M. [Universidade de São Paulo, São Paulo (Brazil)

2014-09-15

Determination of the energy imparted to matter by radiation is the subject of dosimetry. The energy deposited as radiation interacts with atoms of the material, as seen in the previous chapter. The imparted energy is responsible for the effects that radiation causes in matter, for instance, a rise in temperature, or chemical or physical changes in the material properties. Several of the changes produced in matter by radiation are proportional to the absorbed dose, giving rise to the possibility of using the material as the sensitive part of a dosimeter. Also, the biological effects of radiation depend on the absorbed dose. A set of quantities related to the radiation field is also defined within the scope of dosimetry. It will be shown in this chapter that, under special conditions, there are simple relations between dosimetric and field description quantities. Thus, the framework of dosimetry is the set of physical and operational quantities that are studied in this chapter.

38 CFR 21.382 - Training and staff development for personnel providing assistance under Chapter 31.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Training and staff....382 Training and staff development for personnel providing assistance under Chapter 31. (a) General. VA shall provide a program of ongoing professional training and development for staff of the VR&E...

Topics in Productivity, Exporting and Outsourced Services

OpenAIRE

Kidder, Matthew Benjamin

2016-01-01

This dissertation is a collection of three empirical studies using the a survey of Chilean Manufactures. The first two chapters of this dissertation evaluates the productivity impact of exporting and service outsourcing. The last chapter evaluates selection mechanisms into exporting.The first chapter examines productivity and exporting. I find that asymmetric responses, between exporters and non-exporters, to changes in the domestic lending rate can cause propensity-score-matching-differen...

ONWI socioeconomic activities in support of SRPO socioeconomic program

International Nuclear Information System (INIS)

1986-03-01

The introduction describes the purpose of ONWI's Socioeconomic Program for SRPO nuclear waste repository program and the organization within ONWI dedicated to socioeconomic activities. Chapter 2 of this report, Statutory Requirements and Mission Plan Strategy, documents the specific directives and guidelines contained in the NWPA and in the Mission Plan that define DOE's socioeconomic responsibilities. Chapter 3, ONWI Socioeconomic Objectives and Activities to Assist SRPO, describes ONWI's socioeconomic objectives and provides a detailed discussion of the major activities planned to assist SRPO in the impact assessment, mitigation, and monitoring phases of the program. Chapter 4 lists references cited in the report. 15 refs., 8 figs., 3 tabs

Camp Raising Spirits: An Oncology Nursing Society Chapter Leadership Success Story
.

Science.gov (United States)

Fennimore, Laura; Burgunder, Mary; Lee Schafer, Sandra; Jameson, Gayle S

2017-08-01

Oncology Nursing Society (ONS) members share a unique passion for the people they serve and frequently commit to projects that make a difference. Camp Raising Spirits, a weekend retreat for adults with cancer, has made a difference in southwestern Pennsylvania for hundreds of people with cancer and their caregivers for 24 consecutive years. This article will describe how an ONS chapter capitalized on the leadership attributes of partnership, creativity, and commitment to sustain an important community service program. 
.

Chapter 10. Professional migration from Latin America and the Caribbean

OpenAIRE

2013-01-01

From NGO to multilateral organisation and government involvement: three case studiesFernando Lema Executive summary In this chapter we present three case studies of the Latin American diaspora: one on the experience of non-profit organisations (NGO) in France (AFUDEST and ALAS), one on work in an international organisation (UNESCO) and one about field work with a government agency, Argentina's Secretariat for Science, Technology and Productive Innovation (SETCIP). The three experiences took p...

Particle production at collider energies

International Nuclear Information System (INIS)

Geich-Gimbel, C.

1987-11-01

Key features of the SPS panti p Collider and the detectors of the UA-experiments involved are dealt with in chapter 2, which includes and accord to the ramping mode of the Collider, which allowed to raise the c.m. energy to 900 GeV in the UA5/2 experiment. The following chapters concentrate on physics results. Starting with a discussion of cross sections and diffraction dissociation in chapter 3 we then continue with a presentation of basic features of particle production such as rapidity and multiplicity distributions in chapter 4. There one of the unexpected findings at Collider energies, the breakdown of the so-called KNO-scaling, and new regularities potentially governing multiplicity distributions, are discussed. The findings about correlations among the final state particles, which may tell about the underlying dynamics of multi-particle production and be relevant to models thereof, are described in due detail in chapter 5. Transverse spectra and their trends with energy are shown in chapter 6. Results on identified particles are collected in a separate chapter in order to stress that this piece of information was an important outcome of the UA5 experiment. (orig./HSI)

Chapter 6: Selenium Toxicity to Aquatic Organisms

Science.gov (United States)

This chapter addresses the characteristics and nature of organic selenium (Se) toxicity to aquatic organisms, based on the most current state of scientific knowledge. As such, the information contained in this chapter relates to the 'toxicity assessment' phase of aquatic ecologi...

Site Characterization Plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 3, Part A: Chapters 6 and 7

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 218 figs., 50 tabs.

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 3, Part A: Chapters 6 and 7

International Nuclear Information System (INIS)

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE's Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 218 figs., 50 tabs

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 1, Part A: Chapters 1 and 2

International Nuclear Information System (INIS)

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE's Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 750 refs., 123 figs., 42 tabs

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 1, Part A: Chapters 1 and 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 750 refs., 123 figs., 42 tabs.

Chapter 5: Training

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

The chapter 5 presents the 1) initial training; 2) periodic training, which includes: a) periodic training for employees at lower levels of the hierarchy than that of the operator; b) period training for operators; 3) operator training; 4) record of training; 5) safety culture.

A Fuzzy Linear Programming Approach for Aggregate Production Planning

DEFF Research Database (Denmark)

Iris, Cagatay; Cevikcan, Emre

2014-01-01

a mathematical programming framework for aggregate production planning problem under imprecise data environment. After providing background information about APP problem, together with fuzzy linear programming, the fuzzy linear programming model of APP is solved on an illustrative example for different a...

Emerging Space Powers The New Space Programs of Asia, the Middle East, and South America

CERN Document Server

Harvey, Brian; Pirard, Théo

2010-01-01

This work introduces the important emerging space powers of the world. Brian Harvey describes the origins of the Japanese space program, from rocket designs based on WW II German U-boats to tiny solid fuel 'pencil' rockets, which led to the launch of the first Japanese satellite in 1970. The next two chapters relate how Japan expanded its space program, developing small satellites into astronomical observatories and sending missions to the Moon, Mars, comet Halley, and asteroids. Chapter 4 describes how India's Vikram Sarabhai developed a sounding rocket program in the 1960s. The following chapter describes the expansion of the Indian space program. Chapter 6 relates how the Indian space program is looking ahead to the success of the moon probe Chandrayan, due to launch in 2008, and its first manned launching in 2014. Chapters 7, 8, and 9 demonstrate how, in Iran, communications and remote sensing drive space technology. Chapter 10 outlines Brazil's road to space, begun in the mid-1960's with the launch of th...

Radionuclide Production. Chapter 4

Energy Technology Data Exchange (ETDEWEB)

Lundqvist, H. O. [Department of Radiology, Oncology and Radiation Science, Uppsala University, Uppsala (Sweden)

2014-12-15

All matter in the universe has its origin in an event called the ‘big bang’, a cosmic explosion releasing an enormous amount of energy about 14 billion years ago. Scientists believe that particles such as protons and neutrons, which form the building blocks of nuclei, were condensed as free particles during the first seconds. With the decreasing temperature of the expanding universe, the formation of particle combinations such as deuterium (heavy hydrogen) and helium occurred. For several hundred million years, the universe was plasma composed of hydrogen, deuterium, helium ions and free electrons. As the temperature continued to decrease, the electrons were able to attach to ions, forming neutral atoms and converting the plasma into a large cloud of hydrogen and helium gas. Locally, this neutral gas slowly condensed under the force of gravity to form the first stars. As the temperature and the density in the stars increased, the probability of nuclear fusion resulting in the production of heavier elements increased, culminating in all of the elements in the periodic table that we know today. As the stars aged, consuming their hydrogen fuel, they eventually exploded, spreading their contents of heavy materials around the universe. Owing to gravity, other stars formed with planets around them, composed of these heavy elements. Four and a half billion years have passed since the planet Earth was formed. In that time, most of the atomic nuclei consisting of unstable proton–neutron combinations have undergone transformation (radioactive decay) to more stable (non-radioactive) combinations. However, some with very long half-lives remain: {sup 40}K, {sup 204}Pb, {sup 232}Th and the naturally occurring isotopes of uranium.

Various chapter styles for the memoir class

DEFF Research Database (Denmark)

Madsen, Lars

2008-01-01

Document showcasing various chapter title page designs either included in the LaTeX memoir class or is easily manually coded.......Document showcasing various chapter title page designs either included in the LaTeX memoir class or is easily manually coded....

Otolaryngology Residency Program Research Resources and Scholarly Productivity.

Science.gov (United States)

Villwock, Jennifer A; Hamill, Chelsea S; Nicholas, Brian D; Ryan, Jesse T

2017-06-01

Objective To delineate research resources available to otolaryngology residents and their impact on scholarly productivity. Study Design Survey of current otolaryngology program directors. Setting Otolaryngology residency programs. Subjects and Methods An anonymous web-based survey was sent to 98 allopathic otolaryngology training program directors. Fisher exact tests and nonparametric correlations were used to determine statistically significant differences among various strata of programs. Results Thirty-nine percent (n = 38) of queried programs responded. Fourteen (37%) programs had 11 to 15 full-time, academic faculty associated with the residency program. Twenty (53%) programs have a dedicated research coordinator. Basic science lab space and financial resources for statistical work were present at 22 programs (58%). Funding is uniformly provided for presentation of research at conferences; a minority of programs (13%) only funded podium presentations. Twenty-four (63%) have resident research requirements beyond the Accreditation Council for Graduate Medical Education (ACGME) mandate of preparing a "manuscript suitable for publication" prior to graduation. Twenty-five (67%) programs have residents with 2 to 3 active research projects at any given time. None of the investigated resources were significantly associated with increased scholarly output. There was no uniformity to research curricula. Conclusions Otolaryngology residency programs value research, evidenced by financial support provided and requirements beyond the ACGME minimum. Additional resources were not statistically related to an increase in resident research productivity, although they may contribute positively to the overall research experience during training. Potential future areas to examine include research curricula best practices, how to develop meaningful mentorship and resource allocation that inspires continued research interest, and intellectual stimulation.

Environmental monitoring guidance for DOE Order 5820.2A, Chapter 3

International Nuclear Information System (INIS)

Dolenc, M.R.

1988-01-01

The Defense Low-Level Waste Management Program (DLLWMP) is preparing guidance to support the requirements outlined in DOE Order 5820.2A, Chapter 3, Management of Low-Level Waste. One of these documents is the Environmental Monitoring Guidance. Environmental monitoring is required for all operational and nonoperational treatment, storage, and disposal facilities to ensure that the facility conforms to all appropriate DOE orders. An adequate environmental monitoring program must be designed to measure key parameters that may affect both short- and long-term site performance. These parameters include measuring both chemical and radiological releases in surface soil, air, surface water, flora, fauna, and subsurface soil and groundwater, both in the saturated and unsaturated zones. The monitoring program must be capable of detecting performance trends in sufficient time to allow corrective action before the facility exceeds performance objectives. The program should also provide the data input necessary to evaluate the performance assessment of the facility. This paper outlines the approach being planned to accomplish these tasks

C-E productivity improvement program

International Nuclear Information System (INIS)

Chiu, C.; Ching, B.; Van Haltern, M.L.

1984-01-01

This paper describes the C-E Productivity Improvement Program (CEPIP), which is a computer algorithm for heat rate monitoring and diagnostics for a nuclear power plant. CEPIP uses the pattern recognition technique to identify cause(s) of heat rate degradation. The benefits of such an automated program to the plant performance engineer include early identification of the degrading component(s), provision of necessary economic information (cost of energy loss) to the performance engineer so that he can decide when to repair the degrading components, and identification of operator actions resulting in heat rate degradation (such as closing the valve on the live steam extraction line for the second stage of reheat). In summary, CEPIP improves the overall plant performance by increasing the capacity factor. CEPIP was developed to meet the growing needs of the utilities for an automated performance program. The diagnostic capability has been verified by plant data

The NASA/National Space Science Data Center trapped radiation environment model program, 1964 - 1991

International Nuclear Information System (INIS)

Vette, J.I.

1991-11-01

The major effort that NASA, initially with the help of the United States Air Force (USAF), carried out for 27 years to synthesize the experimental and theoretical results of space research related to energetic charged particles into a quantitative description of the terrestrial trapped radiation environment in the form of model environments is detailed. The effort is called the Trapped Radiation Environment Modeling Program (TREMP). In chapter 2 the historical background leading to the establishment of this program is given. Also, the purpose of this modeling program as established by the founders of the program is discussed. This is followed in chapter 3 by the philosophy and approach that was applied in this program throughout its lifetime. As will be seen, this philosophy led to the continuation of the program long after it would have expired. The highlights of the accomplishments are presented in chapter 4. A view to future possible efforts in this arena is given in chapter 5, mainly to pass on to future workers the differences that are perceived from these many years of experience. Chapter 6 is an appendix that details the chronology of the development of TREMP. Finally, the references, which document the work accomplished over these years, are presented in chapter 7

7 CFR 58.149 - Alternate quality control programs for dairy products.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Alternate quality control programs for dairy products... for dairy products. (a) When a plant has in operation an acceptable quality control program which is... (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS...

How to write a medical book chapter?

Science.gov (United States)

Kendirci, Muammer

2013-01-01

Invited medical book chapters are usually requested by editors from experienced authors who have made significant contributions to the literature in certain fields requested by an editor from an experienced. Before the start of the writing process a consensus should be established between the editor and the author with regard to the title, deadline, specific instructions and content of the manuscript. Certain issues concerning a chapter can be negotiated by the parties beforehand, but some issues cannot. As writing a medical book chapter is seen as an honor in its own right, the assignment needs to be treated with sincerity by elucidating the topic in detail, and maximal effort should be made to keep in mind that the chapter will reach a large target audience. The purpose of this review article is to provide guidance to residents and junior specialists in the field of urology to improve their writing skills. PMID:26328134

Efficient C/C++ programming smaller, faster, better

CERN Document Server

Heller, Steve

1994-01-01

Efficient C/C++ Programming describes a practical, real-world approach to efficient C/C++ programming. Topics covered range from how to save storage using a restricted character set and how to speed up access to records by employing hash coding and caching. A selective mailing list system is used to illustrate rapid access to and rearrangement of information selected by criteria specified at runtime.Comprised of eight chapters, this book begins by discussing factors to consider when deciding whether a program needs optimization. In the next chapter, a supermarket price lookup system is used to

Basic Principles - Chapter 6

Data.gov (United States)

National Aeronautics and Space Administration — This chapter described at a very high level some of the considerations that need to be made when designing algorithms for a vehicle health management application....

The Students’ misconceptions profile on chapter gas kinetic theory

Science.gov (United States)

Jauhariyah, M. N. R.; Suprapto, N.; Suliyanah; Admoko, S.; Setyarsih, W.; Harizah, Z.; Zulfa, I.

2018-03-01

Students have conception and misconceptions in the learning process. Misconceptions are caused by the teacher, students, and learning source. In the previous study, the researcher developed a misconception diagnosis instrument using three-tier on chapter gas kinetic theory. There are 14 items including 5 sub-chapters on gas kinetic theory. The profile of students’ misconceptions shows that students have misconceptions in each sub-chapter. The cause of misconceptions came from preconceptions, associative thinking, reasoning, intuition, and false negative. The highest cause of misconception in this chapter is student’s humanistic thinking.

Energy consumption and quality of man's life. Chapter 1

International Nuclear Information System (INIS)

1998-01-01

In Chapter 1 a dependence of public life quality showings from energy consumption value is proved. Priority of fuel-energetic complex development is grounded as well. Specific features of Kazakhstan power engineering during its integration into world economics are given. Problems of liberalization of power engineering economy are illustrated. Dependences between assessments of human potential and energy consumption level in the world and Kazakhstan are given in tabular form. In Kazakhstan under relatively stable education level index an energy consumption reduction was resulted to gross national product decrease on via capita

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 2, Part A: Chapters 3, 4, and 5

International Nuclear Information System (INIS)

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1--5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE's Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 575 refs., 84 figs., 68 tabs

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 2, Part A: Chapters 3, 4, and 5

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1--5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 575 refs., 84 figs., 68 tabs.

Chapter 5: Summary of model application

International Nuclear Information System (INIS)

1995-01-01

This chapter provides a brief summary of the model applications described in Volume III of the Final Report. This chapter dealt with the selected water management regimes; ground water flow regimes; agriculture; ground water quality; hydrodynamics, sediment transport and water quality in the Danube; hydrodynamics, sediment transport and water quality in the river branch system; hydrodynamics, sediment transport and water quality in the Hrusov reservoir and with ecology in this Danube area

Multiparticle production in particle and nuclear collisions, 2

International Nuclear Information System (INIS)

Kanki, Takeshi; Kinoshita, Kisei; Sumiyoshi, Hiroyuki; Takagi, Fujio.

1990-01-01

Multiparticle dynamics is related to many branches of particle and nuclear physics. This book provides a comprehensive review which covers the whole domain of multiparticle dynamics. The review consists of five chapters. Chapter D, which is the first chapter of this volume, is titled 'Mechanism of Fragmentation' and contains six sections dealing with 'parton densities inside hadrons', 'hadron fragmentation and quark picture', 'recombination type models', 'quark fragmentation models in soft interaction', 'diquark and its fragmentation' and 'fragmentation in string models'. Chapter E 'Diffractive Production of Hadrons' discusses 'diffractive inelastic processes of composite particles', 'diffractive processes and triple-pomeron coupling', 'properties of diffractive inelastic final states', and 'nature of pomeron'. Chapter F 'Unified Descriptions' focuses on 'general chain picture', 'dual parton model', 'Monte Carlo simulations' and 'unification of hard and soft interactions'. Chapter G, titled 'Multiparticle Production in Hadron-Nucleus Collisions and Other Nuclear Processes' and contains 11 sections. Chapter H presents conclusions. (N.K.)

Calendar Year 2008 Program Benefits for ENERGY STAR Labeled Products

Energy Technology Data Exchange (ETDEWEB)

Homan, GregoryK; Sanchez, Marla; Brown, RichardE; Lai, Judy

2010-08-24

This paper presents current and projected savings for ENERGY STAR labeled products, and details the status of the model as implemented in the September 2009 spreadsheets. ENERGY STAR is a voluntary energy efficiency labeling program operated jointly by the Environmental Protection Agency (US EPA) and the U.S. Department of Energy (US DOE), designed to identify and promote energy-efficient products, buildings and practices. Since the program inception in 1992, ENERGY STAR has become a leading international brand for energy efficient products, and currently labels more than thirty products, spanning office equipment, heating, cooling and ventilation equipment, commercial and residential lighting, home electronics, and major appliances. ENERGY STAR's central role in the development of regional, national and international energy programs necessitates an open process whereby its program achievements to date as well as projected future savings are shared with stakeholders. This report presents savings estimates for ENERGY STAR labeled products. We present estimates of energy, dollar, and carbon savings achieved by the program in the year 2008, annual forecasts for 2009 and 2010, and cumulative savings estimates for the period 1993 through 2008 and cumulative forecasts for the period 2009 through 2015. Through 2008 the program saved 8.8 Quads of primary energy and avoided the equivalent of 158 metric tones carbon (MtC). The forecast for the period 2009-2015 is 18.1 Quads or primary energy saved and 316 MtC emissions avoided. The sensitivity analysis bounds the best estimate of carbon avoided between 104 MtC and 213 MtC (1993 to 2008) and between 206 MtC and 444 MtC (2009 to 2015). In this report we address the following questions for ENERGY STAR labeled products: (1) How are ENERGY STAR impacts quantified; (2) What are the ENERGY STAR achievements; and (3) What are the limitations to our method?

Thermal and stress analyses with ANSYS program

International Nuclear Information System (INIS)

Kanoo, Iwao; Kawaguchi, Osamu; Asakura, Junichi.

1975-03-01

Some analyses of the heat conduction and elastic/inelastic stresses, carried out in Power Reactor and Nuclear Fuel Development Corporation (PNC) in fiscal 1973 using ANSYS (Engineering Analysis System) program, are summarized. In chapter I, the present state of structural analysis programs available for a FBR (fast breeder reactor) in PNC is explained. Chapter II is a brief description of the ANSYS current status. In chapter III are presented 8 examples of the steady-state and transient thermal analyses for fast-reactor plant components, and in chapter IV 5 examples of the inelastic structural analysis. With the advance in the field of finite element method, its applications in design study should extend progressively in the future. The present report, it is hoped, will contribute as references in similar analyses and at the same time help to understand the deformation and strain behaviors of structures. (Mori, K.)

Polymorphic Uncertain Linear Programming for Generalized Production Planning Problems

Directory of Open Access Journals (Sweden)

Xinbo Zhang

2014-01-01

Full Text Available A polymorphic uncertain linear programming (PULP model is constructed to formulate a class of generalized production planning problems. In accordance with the practical environment, some factors such as the consumption of raw material, the limitation of resource and the demand of product are incorporated into the model as parameters of interval and fuzzy subsets, respectively. Based on the theory of fuzzy interval program and the modified possibility degree for the order of interval numbers, a deterministic equivalent formulation for this model is derived such that a robust solution for the uncertain optimization problem is obtained. Case study indicates that the constructed model and the proposed solution are useful to search for an optimal production plan for the polymorphic uncertain generalized production planning problems.

Production management of window handles

Directory of Open Access Journals (Sweden)

Manuela Ingaldi

2014-12-01

Full Text Available In the chapter a company involved in the production of aluminum window and door handles was presented. The main customers of the company are primarily companies which produce PCV joinery and wholesalers supplying these companies. One chosen product from the research company - a single-arm pin-lift window handle - was described and its production process depicted technologically. The chapter also includes SWOT analysis conducted in the research company and the value stream of the single-arm pin-lift window handle.

Oxide production program monthly report - December 2014

Energy Technology Data Exchange (ETDEWEB)

Kelley, Evelyn A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Whitworth, Julia [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lloyd, Jane Alexandria [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hampton, David Earl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Benavidez, Amelia A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-01-15

A summary of the major activities, accomplishments, milestones, financial summary, project performance and issues facing the ARIES Oxide Production Program for the month of December 2014 is presented in this Executive Summary.

Healthy outdoor recreation: An integrated approach to linking physical activity with wellness goals. Chapter 38

Science.gov (United States)

Paul H. Gobster; David M. Buchner

2010-01-01

The purpose of this chapter is to discuss the shared interest of the public health and leisure fields in promoting outdoor recreation. We describe how trans disciplinary integration of research efforts across these fields can lead to a better understanding of how outdoor recreation facilities and programs can help realize a full range of health and wellness benefits....

Chapter 4. Radioactivity of waters and factors influencing its value

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with radioactivity of waters and factors influencing its value. Chapter consists of next parts: (1) Natural radioactivity of hydrosphere; (2) Radioactive contamination of hydrosphere

FDA (Food and Drug Administration) Compliance Program Guidance Manual (FY 88). Section 4. Medical and radiological devices

International Nuclear Information System (INIS)

1988-01-01

The FDA Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices

Productive Parallel Programming: The PCN Approach

Directory of Open Access Journals (Sweden)

Ian Foster

1992-01-01

Full Text Available We describe the PCN programming system, focusing on those features designed to improve the productivity of scientists and engineers using parallel supercomputers. These features include a simple notation for the concise specification of concurrent algorithms, the ability to incorporate existing Fortran and C code into parallel applications, facilities for reusing parallel program components, a portable toolkit that allows applications to be developed on a workstation or small parallel computer and run unchanged on supercomputers, and integrated debugging and performance analysis tools. We survey representative scientific applications and identify problem classes for which PCN has proved particularly useful.

Master plan study - District heating Kohtla-Jaerve and Johvi municipalities. Estonia. Final report. Appendices for chapter 7

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The appendices to chapter 7 of the master plan study on district heating in the municipalities of Kohtla-Jarve and Johvi (Estonia) present technical data on production units, also with regard to new facilities. (ARW)

Calendar Year 2009 Program Benefits for ENERGY STAR Labeled Products

Energy Technology Data Exchange (ETDEWEB)

Homan, Gregory K; Sanchez, Marla C.; Brown, Richard E.

2010-11-15

ENERGY STAR is a voluntary energy efficiency labeling program operated jointly by the Environmental Protection Agency (US EPA) and the U.S. Department of Energy (US DOE), designed to identify and promote energy-efficient products, buildings and practices. Since the program inception in 1992, ENERGY STAR has become a leading international brand for energy efficient products, and currently labels more than thirty products, spanning office equipment, heating, cooling and ventilation equipment, commercial and residential lighting, home electronics, and major appliances. ENERGY STAR's central role in the development of regional, national and international energy programs necessitates an open process whereby its program achievements to date as well as projected future savings are shared with stakeholders. This report presents savings estimates from the use ENERGY STAR labeled products. We present estimates of energy, dollar, and carbon savings achieved by the program in the year 2009, annual forecasts for 2010 and 2011, and cumulative savings estimates for the period 1993 through 2009 and cumulative forecasts for the period 2010 through 2015. Through 2009 the program saved 9.5 Quads of primary energy and avoided the equivalent of 170 million metric tons carbon (MMTC). The forecast for the period 2009-2015 is 11.5 Quads or primary energy saved and 202 MMTC emissions avoided. The sensitivity analysis bounds the best estimate of carbon avoided between 110 MMTC and 231 MMTC (1993 to 2009) and between 130 MMTC and 285 MMTC (2010 to 2015).

The Fostering Academics Mentoring Excellence Program

Science.gov (United States)

Day, Angelique; Riebschleger, Joanne; Wen, Jiebing

2018-01-01

Precollege outreach programs improve college access for underrepresented students; however, information on foster youth engagement in precollege programs is virtually nonexistent. This chapter describes the impact of a precollege program on two- and four-year college enrollment and completion rates.

Program Planning in Health Professions Education

Science.gov (United States)

Schmidt, Steven W.; Lawson, Luan

2018-01-01

In this chapter, the major concepts from program planning in adult education will be applied to health professions education (HPE). Curriculum planning and program planning will be differentiated, and program development and planning will be grounded in a systems thinking approach.

75 FR 23631 - Sugar Re-Export Program, the Sugar-Containing Products Re-Export Program, and the Polyhydric...

Science.gov (United States)

2010-05-04

... Part 1530 Sugar Re-Export Program, the Sugar-Containing Products Re-Export Program, and the Polyhydric...), Additional U.S. Note 6, which authorizes entry of raw cane sugar under subheading 1701.11.20 of the HTS for the production of polyhydric alcohols, except polyhydric alcohols for use as a substitute for sugar in...

Proposing an Aggregate Production Planning Model by Goal Programming Approach, a Case Study

Directory of Open Access Journals (Sweden)

Mansoureh Farzam Rad

2014-06-01

Full Text Available Production planning is one of the most important functions in the process of production management. Production planning in the intermediate range of time is termed as aggregate production planning (APP. Aggregate production planning is an important upper level planning activity in a production management system. The present study tries to suggest an aggregate production planning model for products of Hafez tile factory during one year. Due to this fact that the director of the company seeks 3 main objectives to determine the optimal production rate, the linear goal planning method was employed. After solving the problem, in order to examine the efficiency and the distinctiveness of this method in compare to linear programming, the problem was modeled just by considering one objective then was solved by linear programming approach. The findings revealed the goal programming with multi objectives resulted more appropriate solution rather than linear programming with just one objective.

Japanese contributions to IAEA INTOR workshop, phase two A, part 2, chapter XI: concept evolution, chapter XII: design concept, and chapter XIII: operation and test programme

International Nuclear Information System (INIS)

Tomabechi, Ken; Fujisawa, Noboru; Iida, Hiromasa

1985-07-01

This report corresponds to Chapters XI, XII, and XIII of Japanese contribution report to IAEA INTOR Workship, Phase Two A, Part 2. In the phase Two A, Part 2 workshop, we have studied critical technical issues and have also assessed scientific and technical data bases. Based on those results, the INTOR design have been modified to upgrade the design concept. The major modification items are related to plasma beta value, plasma operation scenario, reactor size reduction, neutron fluence, tritium producing blanket, and implementation of active control coils. In those chapters, the concept evolution for the design modification and main results are described. (author)

Forestry [Chapter 11

Science.gov (United States)

H. Gyde Lund; William A. Befort; James E. Brickell; William M. Ciesla; Elizabeth C. Collins; Raymond L. Czaplewski; Attilio Antonio Disperati; Robert W. Douglass; Charles W. Dull; Jerry D. Greer; Rachel Riemann Hershey; Vernon J. LaBau; Henry Lachowski; Peter A. Murtha; David J. Nowak; Marc A. Roberts; Pierre Schram; Mahadev D. Shedha; Ashbindu Singh; Kenneth C. Winterberger

1997-01-01

Foresters and other resource managers have used aerial photographs to help manage resources since the late 1920s. As discussed in chapter 1, however, it was not until the mid-1940s that their use became common. Obtaining photographic coverage was always a problem. For many areas of the world, reasonably complete coverage did not exist until after World War II. In...

Chapter 6: Accidents

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

Th chapter 6 presents the accidents of: 1) Stimos (Italy - May, 1975); 2) San Salvador (El Salvador - February 5, 1989); 3) Soreq (Israel - June 21, 1990); 4) Nesvizh (Belarus - October 26, 1991); 5) Illinois (USA - February, 1965); 6)Maryland (EUA - December 11, 1991); 7)Hanoi (Vietnam -November 17, 1992); 8)Fleurus (Belgium - March 11, 2006) and final remarks on accidents.

Developing Mentors: Adult participation, practices, and learning in an out-of-school time STEM program

Science.gov (United States)

Scipio, Deana Aeolani

This dissertation examines learning within an out-of-school time (OST) Science, Technology, Engineering, and Mathematics (STEM) broadening participation program. The dissertation includes an introduction, three empirical chapters (written as individual articles), and a conclusion. The dissertation context is a chemical oceanography OST program for middle school students called Project COOL---Chemical Oceanography Outside the Lab. The program was a collaboration between middle school OST programming, a learning sciences research laboratory, and a chemical oceanography laboratory. Both labs were located at a research-based university in the Pacific Northwest of the United States. Participants include 34 youth, 12 undergraduates, and five professional scientists. The dissertation data corpus includes six years of ethnographic field notes across three field sites, 400 hours of video and audio recordings, 40 hours of semi-structured interviews, and more than 100 participant generated artifacts. Analysis methods include comparative case analysis, cognitive mapping, semiotic cluster analysis, video interaction analysis, and discourse analysis. The first empirical article focuses on synthesizing productive programmatic features from four years of design-based research.. The second article is a comparative case study of three STEM mentors from non-dominant communities in the 2011 COOL OST Program. The third article is a comparative case study of undergraduates learning to be mentors in the 2014 COOL OST Program. Findings introduce Deep Hanging as a theory of learning in practice. Deep Hanging entails authentic tasks in rich contexts, providing access, capitalizing on opportunity, and building interpersonal relationships. Taken together, these three chapters illuminate the process of designing a rich OST learning environment and the kinds of learning in practice that occurred for adult learners learning to be mentors through their participation in the COOL OST program. In

Methane Hydrates: Chapter 8

Science.gov (United States)

Boswell, Ray; Yamamoto, Koji; Lee, Sung-Rock; Collett, Timothy S.; Kumar, Pushpendra; Dallimore, Scott

2008-01-01

Gas hydrate is a solid, naturally occurring substance consisting predominantly of methane gas and water. Recent scientific drilling programs in Japan, Canada, the United States, Korea and India have demonstrated that gas hydrate occurs broadly and in a variety of forms in shallow sediments of the outer continental shelves and in Arctic regions. Field, laboratory and numerical modelling studies conducted to date indicate that gas can be extracted from gas hydrates with existing production technologies, particularly for those deposits in which the gas hydrate exists as pore-filling grains at high saturation in sand-rich reservoirs. A series of regional resource assessments indicate that substantial volumes of gas hydrate likely exist in sand-rich deposits. Recent field programs in Japan, Canada and in the United States have demonstrated the technical viability of methane extraction from gas-hydrate-bearing sand reservoirs and have investigated a range of potential production scenarios. At present, basic reservoir depressurisation shows the greatest promise and can be conducted using primarily standard industry equipment and procedures. Depressurisation is expected to be the foundation of future production systems; additional processes, such as thermal stimulation, mechanical stimulation and chemical injection, will likely also be integrated as dictated by local geological and other conditions. An innovative carbon dioxide and methane swapping technology is also being studied as a method to produce gas from select gas hydrate deposits. In addition, substantial additional volumes of gas hydrate have been found in dense arrays of grain-displacing veins and nodules in fine-grained, clay-dominated sediments; however, to date, no field tests, and very limited numerical modelling, have been conducted with regard to the production potential of such accumulations. Work remains to further refine: (1) the marine resource volumes within potential accumulations that can be

NPOESS Preparatory Project Validation Program for Atmsophere Data Products from VIIRS

Science.gov (United States)

Starr, D.; Wong, E.

2009-12-01

The National Polar-orbiting Operational Environmental Satellite Suite (NPOESS) Program, in partnership with National Aeronautical Space Administration (NASA), will launch the NPOESS Preparatory Project (NPP), a risk reduction and data continuity mission, prior to the first operational NPOESS launch. The NPOESS Program, in partnership with Northrop Grumman Aerospace Systems (NGAS), will execute the NPP Validation program to ensure the data products comply with the requirements of the sponsoring agencies. Data from the NPP Visible/Infrared Imager/Radiometer Suite (VIIRS) will be used to produce Environmental Data Records (EDR's) for aerosol and clouds, specifically Aerosol Optical Thickness (AOT), Aerosol Particle Size Parameter (APSP), and Suspended Matter (SM); and Cloud Optical Thickness (COT), Cloud Effective Particle Size (CEPS), Cloud Top Temperature (CTT), Height (CTH) and Pressure (CTP), and Cloud Base Height (CBH). The Aerosol and Cloud EDR Validation Program is a multifaceted effort to characterize and validate these data products. The program involves systematic comparison to heritage data products, e.g., MODIS, and ground-based correlative data, such as AERONET and ARM data products, and potentially airborne field measurements. To the extent possible, the domain is global. The program leverages various investments that have and are continuing to be made by national funding agencies in such resources, as well as the operational user community and the broad Earth science user community. This presentation will provide an overview of the approaches, data and schedule for the validation of the NPP VIIRS Aerosol and Cloud environmental data products.

Organizational Structures that Support Internal Program Evaluation

Science.gov (United States)

Lambur, Michael T.

2008-01-01

This chapter explores how the structure of large complex organizations such as Cooperative Extension affects their ability to support internal evaluation of their programs and activities. Following a literature review of organizational structure and its relation to internal evaluation capacity, the chapter presents the results of interviews with…

78 FR 79638 - Energy Conservation Program for Consumer Products: Proposed Determination of Hearth Products as a...

Science.gov (United States)

2013-12-31

... Conservation Program for Consumer Products: Proposed Determination of Hearth Products as a Covered Consumer... determined that hearth products qualify as a covered product under Part A of Title III of the Energy Policy and Conservation Act (EPCA), as amended. More specifically, DOE has tentatively determined that hearth...

Martin Marietta Paducah Gaseous Diffusion Plant comprehensive earthquake emergency management program

International Nuclear Information System (INIS)

1990-01-01

Recognizing the value of a proactive, integrated approach to earthquake preparedness planning, Martin Marietta Energy Systems, Inc. initiated a contract in June 1989 with Murray State University, Murray, Kentucky, to develop a comprehensive earthquake management program for their Gaseous Diffusion Plant in Paducah, Kentucky. The overall purpose of the program is to mitigate the loss of life and property in the event of a major destructive earthquake. The program includes four distinct (yet integrated) components: an emergency management plan, with emphasis on the catastrophic earthquake; an Emergency Operations Center Duty Roster Manual; an Integrated Automated Emergency Management Information System (IAEMIS); and a series of five training program modules. The PLAN itself is comprised of four separate volumes: Volume I -- Chapters 1--3; Volume II -- Chapters 4--6, Volume III -- Chapter 7, and Volume IV -- 23 Appendices. The EOC Manual (which includes 15 mutual aid agreements) is designated as Chapter 7 in the PLAN and is a ''stand alone'' document numbered as Volume III. This document, Volume I, provides an introduction, summary and recommendations, and the emergency operations center direction and control

Martin Marietta Paducah Gaseous Diffusion Plant comprehensive earthquake emergency management program

International Nuclear Information System (INIS)

1990-01-01

Recognizing the value of a proactive, integrated approach to earthquake preparedness planning, Martin Marietta Energy Systems, Inc. initiated a contract in June 1989 with Murray State University, Murray, Kentucky, to develop a comprehensive earthquake management program for their Gaseous Diffusion Plant in Paducah, Kentucky (PGDP -- Subcontract No. 19P-JV649V). The overall purpose of the program is to mitigate the loss of life and property in the event of a major destructive earthquake. The program includes four distinct (yet integrated) components: (1) an emergency management plan with emphasis on the catas trophic earthquake; (2) an Emergency Operations Center Duty Roster Manual; (3) an Integrated Automated Emergency Management Information System (IAEMIS); and (4) a series of five training program modules. The PLAN itself is comprised of four separate volumes: Volume I -- Chapters 1--3; Volume II -- Chapters 4--6; Volume III -- Chapter 7; and Volume IV -- 23 Appendices. The EOC Manual (which includes 15 mutual aid agreements) is designated as Chapter 7 in the PLAN and is this document numbered as Volume III

24 CFR 200.936 - Supplementary specific procedural requirements under HUD building products certification program...

Science.gov (United States)

2010-04-01

... requirements under HUD building products certification program for solid fuel type room heaters and fireplace... Supplementary specific procedural requirements under HUD building products certification program for solid fuel... fireplace stoves certified under the HUD Building Products Certification Program shall be designed...

Biomass Program 2007 Program Peer Review - Biochemical and Products Platform Summary

Energy Technology Data Exchange (ETDEWEB)

none,

2009-10-27

This document discloses the comments provided by a review panel at the U.S. Department of Energy Office of the Biomass Program Peer Review held on November 15-16, 2007 in Baltimore, MD and the Biochemical and Products Platform Review held on August 7-9, 2007 in Denver, Colorado.

Object-oriented design and programming with C++ your hands-on guide to C++ programming, with special emphasis on design, testing, and reuse

CERN Document Server

Leach, Ronald

2014-01-01

Object-Oriented Design and Programming with C++: Your Hands-On Guide to C++ Programming, with Special Emphasis on Design, Testing, and Reuse provides a list of software engineering principles to guide the software development process. This book presents the fundamentals of the C++ language.Organized into two parts encompassing 10 chapters, this book begins with an overview of C++ and describes object-oriented programming and the history of C++. This text then introduces classes, polymorphism, inheritance, and overloading. Other chapters consider the C++ preprocessor and organization of class l

Inclusive charged hadrons production in pp collisions with the ALICE-HMPID detector at the LHC

CERN Document Server

Barile, Francesco

The goal of this thesis is the study of the particles identification provided by a small acceptance detector: the High Momentum Particle IDentification detector. Installed during September 2006 and located at about 5 m from the primary vertex, it can contribute to several ALICE physics items using the Cherenkov radiation. This thesis is made of 5 chapters. An overview of the Heavy Ion collisions, the Quark Gluon Plasma, and the main points of the ALICE physics program are described in the first chapter. Some recent results on particles production and hadron ratios are also presented. Chapter 2 is dedicated to the LHC machine, to the ALICE apparatus and to the High Momentum Particle Detector. The layout, the principle of operation and some recent performance results of this RICH detector will be described. Chapter 3 is dedicated to the evaluation of the HMPID PID efficiency. This study exploit the unique possibility to extract the efficiency directly from data using the V$^{0}$ ’s decay. Also, it provides a ...

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 8: Instrumentation Frontier

Energy Technology Data Exchange (ETDEWEB)

Demarteau, M; Lipton, R; Nicholson, H; Shipsey, I; Akerib, D; Albayrak-Yetkin, A; Alexander, J; Anderson, J; Artuso, M; Asner, D; Ball, R; Battaglia, M; Bebek, C; Beene, J; Benhammou, Y; Bentefour, E; Bergevin, M; Bernstein, A; Bilki, B; Blucher, E; Bolla, G; Bortoletto, D; Bowden, N; Brooijmans, G; Byrum, K; Cabrera, B; Cancelo, G; Carlstrom, J; Casey, B; Chang, C; Chapman, J; Chen, CH; Childres, I; Christian, D; Convery, M; Corso, WCJ; Cumalat, J; Cushman, P; Via, CD; Dazeley, S; Debbins, P; Deptuch, G; Dhawan, S; Benedetto, VD; DiGiovene, B; Djurcic, Z; Dye, S; Elagin, A; Estrada, J; Evans, H; Etzion, E; Fast, J; Ferretti, C; Fisher, P; Fleming, B; Francis, K; Friedman, P; Frisch, H; Garcia-Sciveres, M; Gatto, C; Geronim, G; Gilchriese, G; Golwala, S; Grant, C; Grillo, A; Grünendahl, E; Gorham, P; Guan, L; Gutierrez, G; Haber, C; Hall, J; Haller, G; Hast, C; Heintz, U; Hemmick, T; Hitlin, DG; Hogan, C; Hohlmann, M; Hoppe, E; Hsu, L; Huffer, M; Irwin, K; Izraelevitch, F; Jennings, G; Johnson, M; Jung, A; Kagan, H; Kenney, C; Kettell, S; Khanna, R; Khristenko, V; Krennrich, F; Kuehn, K; Kutschke, R; Learned, J; Lee, AT; Levin, D; Liu, T; Liu, ATK; Lissauer, D; Love, J; Lynn, D; MacFarlane, D; Magill, S; Majewski, S; Mans, J; Maricic, J; Marleau, P; Mazzacane, A; McKinsey, D; Mehl, J; Mestvirisvilli, A; Meyer, S; Mokhov, N; Moshe, M; Mukherjee, A; Murat, P; Nahn, S; Narain, M; Nadel-Turonski, P; Newcomer, M; Nishimura, K; Nygren, D; Oberla, E; Onel, Y; Oreglia, M; Orrell, J; Paley, J; Para, A; Parker, S; Polychronakos, V; Pordes, S; Privitera, P; Prosser, A; Pyle, M; Raaf, J; Ramberg, E; Rameika, R; Rebel, B; Repond, J; Reyna, D; Ristori, L; Rivera, R; Ronzhin, A; Rusack, R; Russ, J; Ryd, A; Sadrozinski, H; Sahoo, H; Sanchez, MC; Sanzeni, C; Schnetzer, S; Seidel, S; Seiden, A; Schmidt, I; Shenai, A; Shutt, T; Silver, Y; Smith, W; Snowden-Ifft, D; Sonnenschein, A; Southwick, D; Spiegel, L; Stanitzki, M; Striganov, S; Su, D; Sumner, R; Svoboda, R; Sweany, M; Talaga, R; Tayloe, R; Tentindo, S; Terentiev, N; Thom-Levy, J; Thorn, C; Tiffenberg, J; Trischuk, W; Tschirhart, R; Turner, M; Underwood, D; Uplegger, L; Urheim, J; Vagins, M; Bibber, KV; Varner, G; Varner, R; Va' vra, J; Lippe, HVD; Wagner, R; Wagner, S; Weaverdyck, C; Wenzel, H; Weinstein, A; Wetstein, M; White, A; Wigman, R; Wilson, P; Winn, D; Winter, P; Woody, C; Xia, L; Xie, JQ; Ye, Z; Yeh, MF; Yetkin, T; Yoo, JH; Yu, J; Yu, JM; Zeller, S; Zhang, JL; Zhu, JJ; Zhou, B; Zhu, RY; Zitzer, B

2014-01-23

These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and issues of gathering resources for long-term research in this area.

Chapter 12. Nullification of nuclear reactors

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with problems connected with nullification of nuclear reactors. There are tree basic methods of nullification of nuclear reactors: (1) conservation, (2) safe close (wall up, embed in concrete), (3) direct dismantlement and remotion and two combined ways: (1) combination of mothball with subsequent dismantlement and remotion and (2) combination of safe close with subsequent dismantlement and remotion. Activity levels as well as volumes of radioactive wastes connected with decommissioning of nuclear reactors are reviewed

24 CFR 200.935 - Administrator qualifications and procedures for HUD building products certification programs.

Science.gov (United States)

2010-04-01

... procedures for HUD building products certification programs. 200.935 Section 200.935 Housing and Urban... for HUD building products certification programs. (a) General. This section establishes administrator qualifications and procedures for the HUD Building Products Certification Programs under section 521 of the...

Implementing United States Pharmacopeia Chapter quality assurance in pharmaceutical compounding, Part 5: Outsourcing and responsible personnel.

Science.gov (United States)

Allen, Loyd V

2012-01-01

This final installment of a five-part series relating to United States Pharmacopeia Chapter provides the pros and cons of outsourcing, an extremely important topic because of the many drug shortages and discontinued drugs being experienced, and provides a brief discussion of the importance of having a responsible employee in charge of the quality-assurance program.

Chapter 0: Executive summary

International Nuclear Information System (INIS)

1995-01-01

This chapter deals with the background (Gabcikovo hydro power scheme was input in October 1992), project objective, project framework, equipment, establishment of the integrated modelling system, model setup, calibration and validation, definitions of scenarios for model application and with the results of model applications

Distribution of the product confidence limits for the indirect effect: Program PRODCLIN

Science.gov (United States)

MacKinnon, David P.; Fritz, Matthew S.; Williams, Jason; Lockwood, Chondra M.

2010-01-01

This article describes a program, PRODCLIN (distribution of the PRODuct Confidence Limits for INdirect effects), written for SAS, SPSS, and R, that computes confidence limits for the product of two normal random variables. The program is important because it can be used to obtain more accurate confidence limits for the indirect effect, as demonstrated in several recent articles (MacKinnon, Lockwood, & Williams, 2004; Pituch, Whittaker, & Stapleton, 2005). Tests of the significance of and confidence limits for indirect effects based on the distribution of the product method have more accurate Type I error rates and more power than other, more commonly used tests. Values for the two paths involved in the indirect effect and their standard errors are entered in the PRODCLIN program, and distribution of the product confidence limits are computed. Several examples are used to illustrate the PRODCLIN program. The PRODCLIN programs in rich text format may be downloaded from www.psychonomic.org/archive. PMID:17958149

Chapter 14. Greenhouses

Energy Technology Data Exchange (ETDEWEB)

Rafferty, Kevin D.

1998-01-01

Greenhouse heating is one of the most common uses of geothermal resources. Because of the significant heating requirements of greenhouses and their ability to use very low- temperature fluids, they are a natural application. The evaluation of a particular greenhouse project involves consideration of the structure heating requirements, and the system to meet those requirements. This chapter is intended to provide information on each of these areas.

The northern pike, a prized native but disastrous invasive: Chapter 14

Science.gov (United States)

Rutz, David; Massengill, Robert L.; Sepulveda, Adam; Dunker, Kristine J.

2018-01-01

As the chapters in this book describe, the northern pike Esox lucius Linneaus, 1758 is a fascinating fish that plays an important ecological role in structuring aquatic communities (chapter 8), has the capacity to aid lake restoration efforts (chapter 11), and contributes substantially to local economies, both as a highlysought after sport fish (chapter 12) and as a commercial fishing resource (chapter 13). However, despite the magnificent attributes of this fish, there is another side to its story. Specifically, what happens when northern pike, a highly efficient predator, becomes established outside its natural range? To explore this question, this chapter will investigate observed consequences from many locations where northern pike (hereafter referred to as “pike”) have been introduced and discuss potential reasons why pike, under the right circumstances, can be considered an invasive species.

2 CFR 1.200 - Purpose of chapters I and II.

Science.gov (United States)

2010-01-01

... (and thereby implement the Federal Financial Assistance Management Improvement Act of 1999, Pub. L. 106... Introduction toSubtitle A § 1.200 Purpose of chapters I and II. (a) Chapters I and II of subtitle A provide OMB... procedures for management of the agencies' grants and agreements. (b) There are two chapters for publication...

Palaeoclimate. Chapter 6

Energy Technology Data Exchange (ETDEWEB)

Jansen, E.; Overpeck, J.; Briffa, K.R.; Duplessy, J.C.; Joos, F.; Masson-Delmotte, V.; Olago, D.; Otto-Bliesner, B.; Peltier, W.R.; Rahmstorf, S.; Ramesh, R.; Raynaud, D.; Rind, D.; Solomina, O.; Villalba, R.; Zhang, D.

2007-09-15

This chapter assesses palaeoclimatic data and knowledge of how the climate system changes over interannual to millennial time scales, and how well these variations can be simulated with climate models. Additional palaeoclimatic perspectives are included in other chapters. Palaeoclimate science has made significant advances since the 1970s, when a primary focus was on the origin of the ice ages, the possibility of an imminent future ice age, and the first explorations of the so-called Little Ice Age and Medieval Warm Period. Even in the first IPCC assessment, many climatic variations prior to the instrumental record were not that well known or understood. Fifteen years later, understanding is much improved, more quantitative and better integrated with respect to observations and modelling. After a brief overview of palaeoclimatic methods, including their strengths and weaknesses, this chapter examines the palaeoclimatic record in chronological order, from oldest to youngest. This approach was selected because the climate system varies and changes over all time scales, and it is instructive to understand the contributions that lower-frequency patterns of climate change might make in influencing higher-frequency patterns of variability and change. In addition, an examination of how the climate system has responded to large changes in climate forcing in the past is useful in assessing how the same climate system might respond to the large anticipated forcing changes in the future. Cutting across this chronologically based presentation are assessments of climate forcing and response, and of the ability of state-of-the-art climate models to simulate the responses. Perspectives from palaeoclimatic observations, theory and modelling are integrated wherever possible to reduce uncertainty in the assessment. Several sections also assess the latest developments in the rapidly advancing area of abrupt climate change, that is, forced or unforced climatic change that involves

Palaeoclimate. Chapter 6

International Nuclear Information System (INIS)

Jansen, E.; Overpeck, J.; Briffa, K.R.; Duplessy, J.C.; Joos, F.; Masson-Delmotte, V.; Olago, D.; Otto-Bliesner, B.; Peltier, W.R.; Rahmstorf, S.; Ramesh, R.; Raynaud, D.; Rind, D.; Solomina, O.; Villalba, R.; Zhang, D.

2007-01-01

This chapter assesses palaeoclimatic data and knowledge of how the climate system changes over interannual to millennial time scales, and how well these variations can be simulated with climate models. Additional palaeoclimatic perspectives are included in other chapters. Palaeoclimate science has made significant advances since the 1970s, when a primary focus was on the origin of the ice ages, the possibility of an imminent future ice age, and the first explorations of the so-called Little Ice Age and Medieval Warm Period. Even in the first IPCC assessment, many climatic variations prior to the instrumental record were not that well known or understood. Fifteen years later, understanding is much improved, more quantitative and better integrated with respect to observations and modelling. After a brief overview of palaeoclimatic methods, including their strengths and weaknesses, this chapter examines the palaeoclimatic record in chronological order, from oldest to youngest. This approach was selected because the climate system varies and changes over all time scales, and it is instructive to understand the contributions that lower-frequency patterns of climate change might make in influencing higher-frequency patterns of variability and change. In addition, an examination of how the climate system has responded to large changes in climate forcing in the past is useful in assessing how the same climate system might respond to the large anticipated forcing changes in the future. Cutting across this chronologically based presentation are assessments of climate forcing and response, and of the ability of state-of-the-art climate models to simulate the responses. Perspectives from palaeoclimatic observations, theory and modelling are integrated wherever possible to reduce uncertainty in the assessment. Several sections also assess the latest developments in the rapidly advancing area of abrupt climate change, that is, forced or unforced climatic change that involves

Academic Productivity of US Neurosurgery Residents as Measured by H-Index: Program Ranking with Correlation to Faculty Productivity.

Science.gov (United States)

Sarkiss, Christopher A; Riley, Kyle J; Hernandez, Christopher M; Oermann, Eric K; Ladner, Travis R; Bederson, Joshua B; Shrivastava, Raj K

2017-06-01

Engagement in research and academic productivity are crucial components in the training of a neurosurgeon. This process typically begins in residency training. In this study, we analyzed individual resident productivity as it correlated to publications across all Accreditation Council for Graduate Medical Education (ACGME)-accredited neurosurgery training programs in an attempt to identify how programs have developed and fostered a research culture and environment. We obtained a list of current neurosurgery residents in ACGME-accredited programs from the American Association of Neurological Surgeons database. An expanded PubMed and Scopus search was conducted for each resident through the present time. We tabulated all articles attributed to each resident. We then categorized the publications based on each neurosurgical subspecialty while in residency. A spreadsheet-based statistical analysis was performed. This formulated the average number of resident articles, h-indices, and most common subspecialty categories by training program. We analyzed 1352 current neurosurgery residents in 105 programs. There were a total of 10 645 publications, of which 3985 were resident first-author publications during the period of study. The most common subspecialties among all resident publications were vascular (24.9%), spine (16.9%), oncology (16.1%), pediatric (5.6%), functional (4.9%), and trauma (3.8%). The average resident published 2.9 first-author papers with average of 38.0 first-author publications by total residents at each program (range 0-241). The average h-index per resident is 2.47 ± 3.25. When comparing previously published faculty h-index program rankings against our resident h-index rankings, there is a strong correlation between the 2 datasets with a clear delineation between Top-20 productivity and that of other programs (average h-index 4.2 vs 1.7, respectively, P productivity on both the resident and faculty level (average h-index 1.6, 1.9, 3.9 for 1, 2, and

Synthesis: Chapter 19

Science.gov (United States)

Pardo, L.H.; Geiser, L.H.; Fenn, M.E.; Driscoll, C.T.; Goodale, C.L.; Allen, E.B.; Baron, Jill S.; Bobbink, R.; Bowman, W.D.; Clark, C.M.; Emmett, B.; Gilliam, F.S.; Greaver, T.; Hall, S.J.; Lilleskov, E.A.; Liu, L.; Lynch, J.A.; Nadelhoffer, K.; Perakis, S.S.; Robin-Abbott, M. J.; Stoddard, J.L.; Weathers, K. C.

2011-01-01

Human activity in the last century has led to a substantial increase in nitrogen (N) emissions and deposition (Galloway et al. 2003). Because of past, and, in some regions, continuing increases in emissions (Lehmann et al. 2005, Nilles and Conley 2001), this N deposition has reached a level that has caused or is likely to cause alterations and damage in many ecosystems across the United States. In some ecoregions, the impact of N deposition has been severe and has changed the biotic community structure and composition of ecosystems. In the Mediterranean California ecoregion, for example (see Chapter 13), replacement of native by exotic invasive vegetation is accelerated because exotic species are often more productive under elevated N deposition than native species in some California grasslands, coastal sage scrub, and desert scrub (Fenn et al. 2010, Rao and Allen 2010, Rao et al. 2010, Weiss 1999, Yoshida and Allen 2004). Such shifts in plant community composition and species richness can have consequences beyond changes in ecosystem structure: shifts may lead to overall losses in biodiversity and further impair particular threatened or endangered species (Stevens et al. 2004). Th e extirpation of the endangered checkerspot butterfl y (Euphydryas editha bayensis), because the host plant for the larval stage disappears in N-enriched ecosystems (Fenn et al. 2010, Weiss 1999), is just one example of the detrimental impacts of elevated N deposition.

Neutron-nucleus interactions and fission. Chapter 1

International Nuclear Information System (INIS)

1998-01-01

The central problem in nuclear-reactor kinetics is to predict the evolution in time of the neutron population in a multiplying medium. Point kinetics allows study of the global behaviour of the neutron population from the average properties of the medium. Before tackling, in the following chapters, the equations governing the time variation of the reactor power (proportional to the total neutron population), the properties of a neutron-multiplying medium shall be discussed briefly. After recalling a number of definitions, a qualitative description shall be given of the principal nuclear reactions at play in a self-sustaining chain reaction, with emphasis on the source of fission neutrons. Since delayed neutrons play a crucial role in reactor kinetics, their production in a reactor shall be described in greater detail. (author)

Civilian radioactive waste management program plan. Revision 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

This revision of the Civilian Radioactive Waste Management Program Plan describes the objectives of the Civilian Radioactive Waste management Program (Program) as prescribed by legislative mandate, and the technical achievements, schedule, and costs planned to complete these objectives. The Plan provides Program participants and stakeholders with an updated description of Program activities and milestones for fiscal years (FY) 1998 to 2003. It describes the steps the Program will undertake to provide a viability assessment of the Yucca Mountain site in 1998; prepare the Secretary of Energy`s site recommendation to the President in 2001, if the site is found to be suitable for development as a repository; and submit a license application to the Nuclear Regulatory Commission in 2002 for authorization to construct a repository. The Program`s ultimate challenge is to provide adequate assurance to society that an operating geologic repository at a specific site meets the required standards of safety. Chapter 1 describes the Program`s mission and vision, and summarizes the Program`s broad strategic objectives. Chapter 2 describes the Program`s approach to transform strategic objectives, strategies, and success measures to specific Program activities and milestones. Chapter 3 describes the activities and milestones currently projected by the Program for the next five years for the Yucca Mountain Site Characterization Project; the Waste Acceptance, Storage and Transportation Project; ad the Program Management Center. The appendices present information on the Nuclear Waste Policy Act of 1982, as amended, and the Energy Policy Act of 1992; the history of the Program; the Program`s organization chart; the Commission`s regulations, Disposal of High-Level Radioactive Wastes in geologic Repositories; and a glossary of terms.

Chapter 7: Transport and load of radioactive material

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

Related to the topic, the chapter 7 presents: 1) import License; 2) transport; 3) loading the irradiator. The information presented in this chapter is based on the Brazilian legislation, but said legislation is based on international guidelines; therefore there will be several common and different points from country to country.

Radiation Protection. Chapter 24

Energy Technology Data Exchange (ETDEWEB)

Sutton, D. [Ninewells Hospital, Dundee (United Kingdom); Collins, L. T. [Westmead Hospital, Sydney (Australia); Le Heron, J. [International Atomic Energy Agency, Vienna (Austria)

2014-09-15

Chapter 21, in describing basic radiation biology and radiation effects, demonstrates the need to have a system of radiation protection that allows the many beneficial uses of radiation to be realized while ensuring detrimental radiation effects are either prevented or minimized. This can be achieved with the twin objectives of preventing the occurrence of deterministic effects and of limiting the probability of stochastic effects to a level that is considered acceptable. In a radiology facility, consideration needs to be given to the patient, the staff involved in performing the radiological procedures, members of the public and other staff that may be in the radiology facility, carers and comforters of patients undergoing procedures, and persons who may be undergoing a radiological procedure as part of a biomedical research project. This chapter discusses how the objectives given above are fulfilled through a system of radiation protection and how such a system should be applied practically in a radiology facility.

Constitutive properties and material model development for marine sediments in support of the subseabed disposal program

International Nuclear Information System (INIS)

Baladi, G.Y.; Akers, S.A.

1981-01-01

The purpose of the theoretical investigation was to develop an appropriate elastic-plastic effective-stress constitutive model and the necessary numerical algorithms for seabed sediments for use in computer code simulations of both early-time dynamic penetration of waste canisters and late-time hole closure. The purpose of the experimental program was to provide high-pressure dynamic stress-strain and strength properties for seabed sediments of interest, which in conjunction with data provided by the University of Rhode Island (URI), could be used to guide the development and verification of a constitutive model for such materials. The results of the theoretical program are documented in Part I of this report, which contains four chapters. The fundamental basis of elastic-plastic constitutive models is presented in Chapter 1. The numerical implementation of the elastic-plastic models is discussed in Chapter 2. The development of the effective-stress constitutive model for seabed sediments is presented in Chapter 3. The behavior of this effective-stress model under hydrostatic and triaxial compression test conditions is illustrated in Chapter 4. Part II deals with the experimental program and includes five chapters. Chapter 1 deals with background geotechnical information regarding the physical properties of seabed sediments and presents the scope of the experimental program. Testing equipment and specimen preparation are described in Chapter 2. Chapter 3 outlines test procedures and techniques. Test results are presented in Chapter 4. Representative constitutive properties for Pacific illite are given in Chapter 5. Comparison of the final effective-stress constitutive model fits with laboratory test data are presented in Part III. The numerical values of the material model constants for Pacific illite are also summarized therein. Part IV contains a summary and recommendations for future work

INMETRO products analysis program: impact on quality of the brazilian industry

Directory of Open Access Journals (Sweden)

Marcos André Borges

2008-07-01

Full Text Available The main objective is to proceed a detailed analysis of the Products Analysis Program of Inmetro, evaluating its contribution to the suppliers of products and services. The relevance of this program - a governmental initiative financed with public resources that relates several sectors of the society – as a factor of incentive to the competitiveness of the national industry, can be evidenced by the research of the impact generated by this activity, translated in improvement actions to the analyzed products and services that aim at the correction of eventual non-conformity to the criteria set in standards and technical regulations related to health and safety. Several sectors in industry have been benefited with the creation or revision of standards, implementation of industry quality programs, voluntary or mandatory conformity assessment programs, and others. The consequences include, beyond the protection of the consumers, the increase of national industry competitiveness and domestic market strength, and the warranty of loyal competition between the suppliers. Key-words: Product Analysis, Quality, Inmetro.

Reductions in employee productivity impairment observed after implementation of web-based worksite health promotion programs.

Science.gov (United States)

Silberman, Jordan; Schwartz, Steven; Giuseffi, Danielle L; Wang, Chun; Nevedal, Dana; Bedrosian, Richard

2011-12-01

To assess changes in employee productivity impairment observed after the implementation of several Web-based health promotion programs. Health risk assessments and self-report measures of productivity impairment were administered on-line to more than 43,000 participants of Web-based health promotion programs. Reductions in productivity impairment were observed after 1 month of program utilization. Productivity impairment at 90- and 180-day follow-ups also decreased relative to baseline. Improvements in employee health were associated with reductions in employee productivity impairment. The use of Web-based health promotion programs was associated with reductions in productivity impairment and improvements in employee health. After the implementation of Web-based health promotion programs, reductions in productivity impairment may be observed before reductions in direct health care costs.

Summary and evaluation of nuclear waste forms. Chapter 12

International Nuclear Information System (INIS)

Lutze, W.; Ewing, R.C.

1988-01-01

In this chapter data are compiled from the foregoing contributed chapters into tables. In a few cases additional more recent data not found in the chapters have been included in the tables. The following waste form data are summarized: physical properties, chemical durability, radiation effects and the status of processing techniques. In addition important aspects of the comparison of waste forms and the response of waste forms (glass and ceramic) to corrosion and radiation effects are discussed. (author). 119 refs.; 6 figs.; 5 tabs

Fetal programming alters reactive oxygen species production in sheep cardiac mitochondria.

Science.gov (United States)

von Bergen, Nicholas H; Koppenhafer, Stacia L; Spitz, Douglas R; Volk, Kenneth A; Patel, Sonali S; Roghair, Robert D; Lamb, Fred S; Segar, Jeffrey L; Scholz, Thomas D

2009-04-01

Exposure to an adverse intrauterine environment is recognized as an important risk factor for the development of cardiovascular disease later in life. Although oxidative stress has been proposed as a mechanism for the fetal programming phenotype, the role of mitochondrial O(2)(*-) (superoxide radical) production has not been explored. To determine whether mitochondrial ROS (reactive oxygen species) production is altered by in utero programming, pregnant ewes were given a 48-h dexamethasone (dexamethasone-exposed, 0.28 mg.kg(-1) of body weight.day(-1)) or saline (control) infusion at 27-28 days gestation (term=145 days). Intact left ventricular mitochondria and freeze-thaw mitochondrial membranes were studied from offspring at 4-months of age. AmplexRed was used to measure H(2)O(2) production. Activities of the antioxidant enzymes Mn-SOD (manganese superoxide dismutase), GPx (glutathione peroxidase) and catalase were measured. Compared with controls, a significant increase in Complex I H(2)O(2) production was found in intact mitochondria from dexamethasone-exposed animals. The treatment differences in Complex I-driven H(2)O(2) production were not seen in mitochondrial membranes. Consistent changes in H(2)O(2) production from Complex III in programmed animals were not found. Despite the increase in H(2)O(2) production in intact mitochondria from programmed animals, dexamethasone exposure significantly increased mitochondrial catalase activity, whereas Mn-SOD and GPx activities were unchanged. The results of the present study point to an increase in the rate of release of H(2)O(2) from programmed mitochondria despite an increase in catalase activity. Greater mitochondrial H(2)O(2) release into the cell may play a role in the development of adult disease following exposure to an adverse intrauterine environment.

Applying linear programming model to aggregate production planning of coated peanut products

Science.gov (United States)

Rohmah, W. G.; Purwaningsih, I.; Santoso, EF S. M.

2018-03-01

The aim of this study was to set the overall production level for each grade of coated peanut product to meet market demands with a minimum production cost. The linear programming model was applied in this study. The proposed model was used to minimize the total production cost based on the limited demand of coated peanuts. The demand values applied to the method was previously forecasted using time series method and production capacity aimed to plan the aggregate production for the next 6 month period. The results indicated that the production planning using the proposed model has resulted a better fitted pattern to the customer demands compared to that of the company policy. The production capacity of product family A, B, and C was relatively stable for the first 3 months of the planning periods, then began to fluctuate over the next 3 months. While, the production capacity of product family D and E was fluctuated over the 6-month planning periods, with the values in the range of 10,864 - 32,580 kg and 255 – 5,069 kg, respectively. The total production cost for all products was 27.06% lower than the production cost calculated using the company’s policy-based method.

Student chapters: effective dissemination networks for informal optics and photonics education

Science.gov (United States)

Fabian, Dirk; Vermeulen, Nathalie; Van Overmeire, Sara

2009-06-01

Professional societies sponsor student chapters in order to foster scholarship and training in photonics at the college and graduate level, but they are also an excellent resource for disseminating photonics knowledge to pre-college students and teachers. Starting in 2006, we tracked the involvement of SPIE student chapter volunteers in informal pre-college education settings. Chapter students reached 2800, 4900 and 11800 pre-college students respectively from 2006-2008 with some form of informal instruction in optics and photonics. As a case study, the EduKit, a self-contained instruction module featuring refractive and diffractive micro-optics developed by the European Network of Excellence on Micro-Optics (NEMO), was disseminated through student chapters in Argentina, Belgium, Canada, China, Colombia, India, Latvia, Mexico, Peru, Russia, Singapore, South Africa, and the United States. We tracked the movement of this material through the network, up to the student-teacher feedback stage. The student chapter network provided rapid dissemination of the material, translation of the material into the local language, and leveraged existing chapter contacts in schools to provide an audience. We describe the student chapter network and its impact on the development of the EduKit teaching module.

Martin Marietta Paducah Gaseous Diffusion Plant comprehensive earthquake emergency management program

International Nuclear Information System (INIS)

1990-01-01

Recognizing the value of a proactive, integrated approach to earthquake preparedness planning, Martin Marietta Energy Systems, Inc. initiated a contract in June 1989 with Murray State University, Murray, Kentucky, to develop a comprehensive earthquake management program for their Gaseous Diffusion Plant in Paducah, Kentucky (PGDP -- Subcontract No. 19P-JV649V). The overall purpose of the program is to mitigate the loss of life and property in the event of a major destructive earthquake. The program includes four distinct (yet integrated) components: an emergency management plan, with emphasis on the catastrophic earthquake; an Emergency Operations Center Duty Roster Manual; an Integrated Automated Emergency Management Information System (IAEMIS); and a series of five training program modules. The PLAN itself is comprised of four separate volumes: Volume I -- Chapters 1--3; Volume II -- Chapters 4--6, Volume III -- Chapter 7, and Volume IV -- 23 Appendices. The EOC Manual (which includes 15 mutual aid agreements) is designated as Chapter 7 in the PLAN and is a ''stand alone'' document numbered as Volume III. This document, Volume II, discusses methodology, engineering and environmental analyses, and operational procedures

Martin Marietta Paducah Gaseous Diffusion Plant comprehensive earthquake emergency management program

International Nuclear Information System (INIS)

1990-01-01

Recognizing the value of a proactive, integrated approach to earthquake preparedness planning, Martin Marietta Energy Systems, Inc, initiated a contract in June 1989 with Murray State University, Murray, Kentucky, to develop a comprehensive earthquake management program for their Gaseous Diffusion Plant in Paducah, Kentucky (PGDP--Subcontract No. 19P-JV649V). The overall purpose of the program is to mitigate the loss of life and property in the event of a major destructive earthquake. The program includes four distinct (yet integrated) components: (1) an emergency management plan, with emphasis on the catas trophic earthquake, (2) an Emergency Operations Center Duty Roster Manual, (3) an Integrated Automated Emergency Management Information System (IAEMIS), and (4) a series of five training program modules. The PLAN itself is comprised of four separate volumes: Volume I--Chapters 1--3; Volume II--Chapters 4--6, Volume III--Chapter 7, and Volume IV--23 Appendices. The EOC Manual (which includes 15 mutual aid agreements) is designated as Chapter 7 in the PLAN and is a ''stand alone'' document numbered as Volume III. This document, Volume IV contains the appendices to this report

38 CFR 21.5230 - Programs of education.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Programs of education. 21...) VOCATIONAL REHABILITATION AND EDUCATION Post-Vietnam Era Veterans' Educational Assistance Under 38 U.S.C. Chapter 32 Programs of Education § 21.5230 Programs of education. (a) Approving the selected program of...

38 CFR 21.5290 - Educational Assistance Pilot Program.

Science.gov (United States)

2010-07-01

... Pilot Program. 21.5290 Section 21.5290 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS... Assistance Under 38 U.S.C. Chapter 32 Educational Assistance Pilot Program § 21.5290 Educational Assistance Pilot Program. (a) Purpose. The Educational Assistance Pilot Program is designed to encourage...

Programming Language Pragmatics

CERN Document Server

Scott, Michael L

2009-01-01

Programming Language Pragmatics is the most comprehensive programming language textbook available today. Taking the perspective that language design and language implementation are tightly interconnected, and that neither can be fully understood in isolation, this critically acclaimed and bestselling book has been thoroughly updated to cover the most recent developments in programming language design. With a new chapter on run-time program management and expanded coverage of concurrency, this new edition provides both students and professionals alike with a solid understanding of the most impo

Short-term hydropower production planning by stochastic programming

DEFF Research Database (Denmark)

Fleten, Stein-Erik; Kristoffersen, Trine

2008-01-01

-term production planning a matter of spatial distribution among the reservoirs of the plant. Day-ahead market prices and reservoir inflows are, however, uncertain beyond the current operation day and water must be allocated among the reservoirs in order to strike a balance between current profits and expected......Within the framework of multi-stage mixed-integer linear stochastic programming we develop a short-term production plan for a price-taking hydropower plant operating under uncertainty. Current production must comply with the day-ahead commitments of the previous day which makes short...

Civilian radioactive waste management program plan. Revision 2

International Nuclear Information System (INIS)

1998-07-01

This revision of the Civilian Radioactive Waste Management Program Plan describes the objectives of the Civilian Radioactive Waste management Program (Program) as prescribed by legislative mandate, and the technical achievements, schedule, and costs planned to complete these objectives. The Plan provides Program participants and stakeholders with an updated description of Program activities and milestones for fiscal years (FY) 1998 to 2003. It describes the steps the Program will undertake to provide a viability assessment of the Yucca Mountain site in 1998; prepare the Secretary of Energy's site recommendation to the President in 2001, if the site is found to be suitable for development as a repository; and submit a license application to the Nuclear Regulatory Commission in 2002 for authorization to construct a repository. The Program's ultimate challenge is to provide adequate assurance to society that an operating geologic repository at a specific site meets the required standards of safety. Chapter 1 describes the Program's mission and vision, and summarizes the Program's broad strategic objectives. Chapter 2 describes the Program's approach to transform strategic objectives, strategies, and success measures to specific Program activities and milestones. Chapter 3 describes the activities and milestones currently projected by the Program for the next five years for the Yucca Mountain Site Characterization Project; the Waste Acceptance, Storage and Transportation Project; ad the Program Management Center. The appendices present information on the Nuclear Waste Policy Act of 1982, as amended, and the Energy Policy Act of 1992; the history of the Program; the Program's organization chart; the Commission's regulations, Disposal of High-Level Radioactive Wastes in geologic Repositories; and a glossary of terms

Pomegranate production and marketing

Science.gov (United States)

This book is relatively short, with 134 pages, 15 chapters, 52 figures, and 20 tables. It ranges from cultivar descriptions, production, biotic and abiotic challenges to production, to postharvest, aril and juice production, health benefits, and international trade. It contains great information and...

FDA (Food and Drug Administration) compliance program guidance manual and updates (FY 86). Section 4. Medical and radiological devices. Irregular report

International Nuclear Information System (INIS)

1986-01-01

The FDA Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices

Nuclear Medicine Imaging Devices. Chapter 11

Energy Technology Data Exchange (ETDEWEB)

Lodge, M. A.; Frey, E. C. [Russell H. Morgan Department of Radiology and Radiological Sciences, Johns Hopkins University, Baltimore, MD (United States)

2014-12-15

Imaging forms an important part of nuclear medicine and a number of different imaging devices have been developed. This chapter describes the principles and technological characteristics of the main imaging devices used in nuclear medicine. The two major categories are gamma camera systems and positron emission tomography (PET) systems. The former are used to image γ rays emitted by any nuclide, while the latter exploit the directional correlation between annihilation photons emitted by positron decay. The first section of this chapter discusses the principal components of gamma cameras and how they are used to form 2-D planar images as well as 3-D tomographic images (single photon emission computed tomography (SPECT)). The second section describes related instrumentation that has been optimized for PET data acquisition. A major advance in nuclear medicine was achieved with the introduction of multi-modality imaging systems including SPECT/computed tomography (CT) and PET/CT. In these systems, the CT images can be used to provide an anatomical context for the functional nuclear medicine images and allow for attenuation compensation. The third section in this chapter provides a discussion of the principles of these devices.

MULTI-CRITERIA PROGRAMMING METHODS AND PRODUCTION PLAN OPTIMIZATION PROBLEM SOLVING IN METAL INDUSTRY

OpenAIRE

Tunjo Perić; Željko Mandić

2017-01-01

This paper presents the production plan optimization in the metal industry considered as a multi-criteria programming problem. We first provided the definition of the multi-criteria programming problem and classification of the multicriteria programming methods. Then we applied two multi-criteria programming methods (the STEM method and the PROMETHEE method) in solving a problem of multi-criteria optimization production plan in a company from the metal industry. The obtained resul...

Composting: Mass Balances and Product Quality

DEFF Research Database (Denmark)

Boldrin, Alessio; Christensen, Thomas Højlund; Körner, I.

2011-01-01

While the basic processes involved in composting of waste are described in Chapter 9.1 and the main composting technologies are presented in Chapter 9.2, this chapter focuses on mass balances, environmental emissions, unit process inventories and the quality of the compost produced. Understanding...... these issues and being able to account for them is a prerequisite in compost engineering and for establishing and running a successful composting facility. Of specific importance is the final use of the compost product. Use in agriculture is described in Chapter 9.10 and the use of compost in soil amendment...

Optimization of Product Instantiation using Integer Programming

NARCIS (Netherlands)

van den Broek, P.M.; Botterweck, Goetz; Jarzabek, Stan; Kishi, Tomoji

2010-01-01

We show that Integer Programming (IP) can be used as an optimization technique for the instantiation of products of feature models. This is done by showing that the constraints of feature models can be written in linear form. As particular IP technique, we use Gomory cutting planes. We have applied

Nursery management [Chapter 16

Science.gov (United States)

Kim M. Wilkinson

2009-01-01

This handbook provides an overview of the factors that go into starting and operating a native plant nursery. Management includes all aspects of working with plants in all their phases of growth as described in Chapter 3, Crop Planning and Developing Propagation Protocols. Management also includes working with the community; organizing materials and infrastructure;...

Chapter 8. Data Analysis

Science.gov (United States)

Lyman L. McDonald; Christina D. Vojta; Kevin S. McKelvey

2013-01-01

Perhaps the greatest barrier between monitoring and management is data analysis. Data languish in drawers and spreadsheets because those who collect or maintain monitoring data lack training in how to effectively summarize and analyze their findings. This chapter serves as a first step to surmounting that barrier by empowering any monitoring team with the basic...

Atmospheric Sciences Program summaries of research in FY 1993

Energy Technology Data Exchange (ETDEWEB)

1993-11-01

This document describes the activities and products of the Atmospheric Science Program of the Environmental Sciences Division, Office of Health and Environmental Research, Office of Energy Research, in FY 1993. Each description contains the project`s title; three-year funding history; the contract period over which the funding applies; the name(s) of the principal investigator(s); the institution(s) conducting the projects; and the project`s objectives, products, approach, and results to date. Project descriptions are categorized within the report according to program areas: atmospheric chemistry, atmospheric dynamics, and support operations. Within these categories, the descriptions are ordered alphabetically by principal investigator. Each program area is preceded by a brief text that defines the program area, states its goals and objectives, lists principal research questions, and identifies program managers. Appendixes provide the addresses and telephone numbers of the principal investigators and define the acronyms used. This document has been indexed to aid the reader in locating research topics, participants, and research institutions in the text and the project descriptions. Comprehensive subject, principal investigator, and institution indexes are provided at the end of the text for this purpose. The comprehensive subject index includes keywords from the introduction and chapter texts in addition to those from the project descriptions.

MANAJEMEN EDITING POST PRODUCTION PROGRAM CURRENT AFFAIR DI TVONE

Directory of Open Access Journals (Sweden)

Ridho Azlam Ambo Asse

2016-11-01

Full Text Available Management is the art of completing the work through others. In an organization there are various components that are structured and coordinated in the movement toward shared vision and mission. Management is looking for that component to move under coordination, pressure, and problems that hit. Editing management, especially for the current affair type program, has a special purpose. Not just the speed of productivity that is based on the ability of individual editors. This research is done to know the process of stage editor in work. The process of managing files, data management, human resources, tools, facilities, scheduling, until the pattern of editing stage in one of the national media industry. This study concludes that the current affair program management editing system based on the concept of planning, organizing, implementation, supervision, and productivity management is done by Top Down method from top to bottom in the management of currenf affair tvOne editing program. What gets from above during a pre-production meeting of a program. Then coordinate with the supervisor and then delegate down to be implemented according to the agreed plan and in accordance with the duties and functions of both the production team and the editor.   Manajemen merupakan seni menyelesaikan pekerjaan melalui orang lain. Dalam sebuah organisasi terdapat berbagai macam komponen yang terstruktur dan terkordinasi dalam gerakan menuju visi dan misi bersama. Manajemen ialah mencari agar komponen tersebut dapat bergerak dibawah koordinasi, tekanan, dan masalah yang menerpa. Manajemen editing khususnya untuk program berjenis current affair, memiliki tujuan khusus. Tidak sekedar kecepatan produktifitas yang didasarkan pada kemampuan individu editor. Penelitian yang dilakukan ini untuk mengetahui proses tahapan editor dalam bekerja. Proses mengelola file, pengelolaan data, sumber daya manusia, alat, fasilitas, penjadwalan, hingga pola tahapan editing pada salah

Quality Management. Chapter 19

Energy Technology Data Exchange (ETDEWEB)

Hiles, P. A. [Glan Clwyd Hospital, Bodelwyddan (United Kingdom); McLean, I. D. [International Atomic Energy Agency, Vienna (Austria); Christofides, S. [New Nicosia General Hospital, Nicosia (Cyprus)

2014-09-15

This chapter introduces the principles and definitions of quality management systems (QMSs) for radiology facilities, to give a framework to assist in the setting up of such systems and to emphasize the role of the medical physicist in this context. While there is a diversity of terms currently in use to describe quality processes both generally and specifically within radiology, there is broad agreement that the effective management of radiation medicine services demands a quality culture that includes a systematic approach to the elements that govern the delivery of that service. Therefore, the concept of quality assurance (QA) within the radiological facility covers, in its widest sense, all those factors that affect the intended outcome, that is, a clinical diagnosis. The medical physicist has an important role in the overall QMS, especially, but not exclusively, with respect to the equipment performance. A worked example of a quality control (QC) programme is included at the end of the chapter, to demonstrate the depth of detail and involvement of the medical physicist.

Experiences gained by establishing the IAMG Student Chapter Freiberg

Science.gov (United States)

Ernst, Sebastian M.; Liesenberg, Veraldo; Shahzad, Faisal

2013-04-01

The International Association for Mathematical Geosciences (IAMG) Student Chapter Freiberg was founded in 2007 at the Technische Universität Bergakademie Freiberg (TUBAF) in Germany by national and international graduate and undergraduate students of various geoscientific as well as natural science disciplines. The major aim of the IAMG is to promote international cooperation in the application and use of Mathematics in Geosciences research and technology. The IAMG encourages all types of students and young scientists to found and maintain student chapters, which can even receive limited financial support by the IAMG. Following this encouragement, generations of students at TUBAF have build up and established a prosperous range of activities. These might be an example and an invitation for other young scientists and institutions worldwide to run similar activities. We, some of the current and former students behind the student chapter, have organised talks, membership drives, student seminars, guest lectures, several short courses and even international workshops. Some notable short courses were held by invited IAMG distinguished lecturers. The topics included "Statistical analysis in the Earth Sciences using R - a language and environment for statistical computing and graphics", "Geomathematical Natural Resource Modeling" and "Introduction to Geostatistics for Environmental Applications and Natural Resources Evaluation: Basic Concepts and Examples". Furthermore, we conducted short courses by ourselves. Here, the topics included basic introductions into MATLAB, object oriented programming concepts for geoscientists using MATLAB and an introduction to the Keyhole Markup Language (KML). Most of those short courses lasted several days and provided an excellent and unprecedented teaching experience for us. We were given credit by attending students for filling gaps in our university's curriculum by providing in-depth and hands-on tutorials on topics, which were merely

Increasing Sales by Developing Production Consortiums.

Science.gov (United States)

Smith, Christopher A.; Russo, Robert

Intended to help rehabilitation facility administrators increase organizational income from manufacturing and/or contracted service sources, this document provides a decision-making model for the development of a production consortium. The document consists of five chapters and two appendices. Chapter 1 defines the consortium concept, explains…

Instrumentation for Dosimetry. Chapter 21

Energy Technology Data Exchange (ETDEWEB)

Hourdakis, J. C. [Greek Atomic Energy Commission, Athens (Greece); Nowotny, R. [Medical University of Vienna, Vienna (Austria)

2014-09-15

Measurements of absorbed dose (or air kerma) are required in varying situations in diagnostic radiology. The radiation fields vary from plain, slit and even point projection geometry, and may be stationary or moving, including rotational. Owing to the use of low photon energies for these fields, it is important that dosimeters have a satisfactory energy response. In general, the requirements for dosimeter accuracy are less stringent than those in radiation therapy; however, the dose and dose rate measurements cover a large range. Patient dosimetry (see Chapter 22) is a primary responsibility of the medical physicist specializing in diagnostic radiology and is required by legislation in many countries. Dose data are also required in the optimization of examinations for image quality and dose. Radiation measurement is also critical for occupational and public exposure control (see Chapter 24). Dose measurements are essential in acceptance testing and quality control (see Chapter 19). Several types of dosimeter can be used, provided that they have a suitable energy response, but typically, ionization chambers of a few cubic centimetres in volume, or solid state detectors specifically designed for such measurements, are used. If dosimeters are used to make measurements during an examination, they must not interfere with the examination. These devices are also used for determination of the half value layer (HVL). Special types of ionization chamber are employed for computed tomography (CT), mammography and interventional radiology dosimetry.

Using program impact pathways to understand and improve program delivery, utilization, and potential for impact of Helen Keller International's homestead food production program in Cambodia.

Science.gov (United States)

Olney, Deanna K; Vicheka, Sao; Kro, Meng; Chakriya, Chhom; Kroeun, Hou; Hoing, Ly Sok; Talukder, Aminzzaman; Quinn, Victoria; Iannotti, Lora; Becker, Elisabeth; Roopnaraine, Terry

2013-06-01

Evidence of the impact of homestead food production programs on nutrition outcomes such as anemia and growth is scant. In the absence of information on program impact pathways, it is difficult to understand why these programs, which have been successful in increasing intake of micronutrient-rich foods, have had such limited documented impact on nutrition outcomes. To conduct a process evaluation of Helen Keller International's (HKI's) homestead food production program in Cambodia to assess whether the program was operating as planned (in terms of design, delivery, and utilization) and to identify ways in which the program might need to be strengthened in order to increase its potential for impact. A program theory framework, which laid out the primary components along the hypothesized program impact pathways, was developed in collaboration with HKI and used to design the research. Semistructured interviews and focus group discussions with program beneficiaries (n = 36 and 12, respectively), nonbeneficiaries (n = 12), and program implementers (n = 17 and 2, respectively) and observations of key program delivery points, including health and nutrition training sessions (n = 6), village model farms (n = 6), and household gardens of beneficiaries (n = 36) and nonbeneficiaries (n = 12), were conducted to assess the delivery and utilization of the primary program components along the impact pathways. The majority of program components were being delivered and utilized as planned. However, challenges with some of the key components posited to improve outcomes such as anemia and growth were noted. Among these were a gap in the expected pathway from poultry production to increased intake of eggs and poultry meat, and some weaknesses in the delivery of the health and nutrition training sessions and related improvements in knowledge among the village health volunteers and beneficiaries. Although the program has been successful in delivering the majority of the program

Problems Analysis on Increasing Rice Production Through Food Estate Program in Bulungan Regency, North Kalimantan

Science.gov (United States)

Setyo, P.; Elly, J.

2018-05-01

To increase rice production in the Province of North Kalimantan, the provincial government has launched a Food Estate Program. The program is also a central government program in relation to government policies on food security. One of the food estate development areas is the Delta Kayan Food Estate of 50,000 hectares in Bulungan Regency, where about 30,000 hectares area is a tidal land with a very fertile alluvial soil type. This policy study aims to identify and analyze problems of increasing rice production through food estate development in North Kalimantan Province and formulate priority programs as recommendations for policy making in increasing rice production. The study has identified a number of problems of increasing rice production, such as land tenure, land suitability, water system, infrastructure, accessibility of production factors, institutional, and capacity of human resources. The Analytic Hierarchy Process was applied to develop priority programs, resulting in the three most important programs being water management, improving access to production factors, and improving the capacity of human resources. Action plans related to priority programs have also been identified.

Radiation biology. Chapter 20

Energy Technology Data Exchange (ETDEWEB)

Wondergem, J. [International Atomic Energy Agency, Vienna (Austria)

2014-09-15

Radiation biology (radiobiology) is the study of the action of ionizing radiations on living matter. This chapter gives an overview of the biological effects of ionizing radiation and discusses the physical, chemical and biological variables that affect dose response at the cellular, tissue and whole body levels at doses and dose rates relevant to diagnostic radiology.

Water resources (Chapter 12)

Science.gov (United States)

Thomas C. Brown; Romano Foti; Jorge Ramirez

2012-01-01

In this chapter, we focus on the vulnerability of U.S. freshwater supplies considering all lands, not just forest and rangelands. We do not assess the condition of those lands or report on how much of our water supply originates on lands of different land covers or ownerships, because earlier Resources Planning Act (RPA) Assessment work addressed these topics....

Programming language structures

CERN Document Server

Organick, Elliott Irving; Plummer, Robert P

1978-01-01

Programming Language Structures deals with the structures of programming languages and introduces the reader to five important programming languages: Algol, Fortran, Lisp, Snobol, and Pascal. The fundamental similarities and differences among these languages are discussed. A unifying framework is constructed that can be used to study the structure of other languages, such as Cobol, PL/I, and APL. Several of the tools and methodologies needed to construct large programs are also considered.Comprised of 10 chapters, this book begins with a summary of the relevant concepts and principles about al

Non-timber forest product extraction as a productive bricolage process

NARCIS (Netherlands)

Ros-Tonen, M.; Arts, B.; van Bommel, S.; Ros-Tonen, M.; Verschoor, G.

2012-01-01

This chapter explores the usefulness of the ‘productive bricolage’ concept, coined by Croll and Parkin (1992) and further elaborated by Batterbury (2001), in understanding the role of non-timber forest products (NTFPs) in people’s livelihoods and the forested landscape. I argue that NTFP extraction

Reinforcing Productivity in a Job-Skills Training Program for Unemployed Substance-Abusing Adults.

Science.gov (United States)

Subramaniam, Shrinidhi; Everly, Jeffrey J; Silverman, Kenneth

2017-05-01

Chronically unemployed adults may benefit from intensive job-skills training; however, training programs do not always reliably engage participants in mastering skills. This study examined effects of voucher reinforcement for performance on a job-skills training program in the therapeutic workplace. Participants were four unemployed, substance abusing adults who earned monetary vouchers for working on programs targeting typing skills. Participants were exposed to two payment conditions that differed in whether or not pay was dependent on performance in a within-subject reversal design. In the productivity-pay condition, participants earned $8.00 per hour for attending the workplace plus a bonus for performance. In the base-pay condition, participants were paid an hourly wage that was equivalent to the total hourly earnings from the previous productivity-pay condition. Participants completed less work on the typing programs in the base- than the productivity-pay condition, but the amount of time spent in the workroom and the accuracy and rate of typing were not affected by the pay manipulation. All participants reported preferring base pay over productivity pay. Explicit reinforcement of productivity maintains consistent work in training programs, but more aspects of productivity pay need to be refined for effective, efficient, and socially valid implementation with unemployed, substance-abusing adults.

Fission Product Experimental Program: Validation and Computational Analysis

Energy Technology Data Exchange (ETDEWEB)

Leclaire, N.; Ivanova, T.; Letang, E. [Inst Radioprotect and Surete Nucl, F-92262 Fontenay Aux Roses (France); Girault, E. [CEA Valduc, Serv Rech Neutron and Critcite, 21 - Is-sur-Tille (France); Thro, J. F. [AREVA NC, F-78000 Versailles (France)

2009-02-15

From 1998 to 2004, a series of critical experiments referred to as the fission product (FP) experimental program was performed at the Commissariat a l'Energie Atomique Valduc research facility. The experiments were designed by Institut de Radioprotection et de Surete Nucleaire (IRSN) and funded by AREVA NC and IRSN within the French program supporting development of a technical basis for burnup credit validation. The experiments were performed with the following six key fission products encountered in solution either individually or as mixtures: {sup 103}Rh, {sup 133}Cs, {sup nat}Nd, {sup 149}Sm, {sup 152}Sm, and {sup 155}Gd. The program aimed at compensating for the lack of information on critical experiments involving FPs and at establishing a basis for FPs credit validation. One hundred forty-five critical experiments were performed, evaluated, and analyzed with the French CRISTAL criticality safety package and the American SCALE5. 1 code system employing different cross-section libraries. The aim of the paper is to show the experimental data potential to improve the ability to perform validation of full burnup credit calculation. The paper describes three Phases of the experimental program; the results of preliminary evaluation, the calculation, and the sensitivity/uncertainty study of the FP experiments used to validate the APOLLO2-MORET 4 route in the CRISTAL criticality package for burnup credit applications. (authors)

77 FR 49063 - Energy Conservation Program: Test Procedures for Residential Dishwashers and Cooking Products

Science.gov (United States)

2012-08-15

... Energy Conservation Program: Test Procedures for Residential Dishwashers and Cooking Products; Proposed...-AC01 Energy Conservation Program: Test Procedures for Residential Dishwashers and Cooking Products... procedures for both dishwashers and conventional cooking products for the measurement of energy use in fan...

Chapter 12: Survey Design and Implementation for Estimating Gross Savings Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

Energy Technology Data Exchange (ETDEWEB)

Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baumgartner, Robert [Tetra Tech, Madison, WI (United States)

2017-10-05

This chapter presents an overview of best practices for designing and executing survey research to estimate gross energy savings in energy efficiency evaluations. A detailed description of the specific techniques and strategies for designing questions, implementing a survey, and analyzing and reporting the survey procedures and results is beyond the scope of this chapter. So for each topic covered below, readers are encouraged to consult articles and books cited in References, as well as other sources that cover the specific topics in greater depth. This chapter focuses on the use of survey methods to collect data for estimating gross savings from energy efficiency programs.

Chapter 8. Ionisation radiation and human organism. Radioactivity of human tissues

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with ionisation radiation and human organism as well as with radioactivity of human tissues. Chapter consists of next parts: (1) Radiation stress of human organism; (2) Radioactivity of human tissues and the factors influencing radioactive contamination; (3) Possibilities of decreasing of radiation stress

Advanced Topics in Computational Partial Differential Equations: Numerical Methods and Diffpack Programming

International Nuclear Information System (INIS)

Katsaounis, T D

2005-01-01

The scope of this book is to present well known simple and advanced numerical methods for solving partial differential equations (PDEs) and how to implement these methods using the programming environment of the software package Diffpack. A basic background in PDEs and numerical methods is required by the potential reader. Further, a basic knowledge of the finite element method and its implementation in one and two space dimensions is required. The authors claim that no prior knowledge of the package Diffpack is required, which is true, but the reader should be at least familiar with an object oriented programming language like C++ in order to better comprehend the programming environment of Diffpack. Certainly, a prior knowledge or usage of Diffpack would be a great advantage to the reader. The book consists of 15 chapters, each one written by one or more authors. Each chapter is basically divided into two parts: the first part is about mathematical models described by PDEs and numerical methods to solve these models and the second part describes how to implement the numerical methods using the programming environment of Diffpack. Each chapter closes with a list of references on its subject. The first nine chapters cover well known numerical methods for solving the basic types of PDEs. Further, programming techniques on the serial as well as on the parallel implementation of numerical methods are also included in these chapters. The last five chapters are dedicated to applications, modelled by PDEs, in a variety of fields. In summary, the book focuses on the computational and implementational issues involved in solving partial differential equations. The potential reader should have a basic knowledge of PDEs and the finite difference and finite element methods. The examples presented are solved within the programming framework of Diffpack and the reader should have prior experience with the particular software in order to take full advantage of the book. Overall

Assessing the Multiple Benefits of Clean Energy Chapter 1: Introduction

Science.gov (United States)

Chapter 1 of “Assessing the Multiple Benefits of Clean Energy” provides an introduction to the document. /meta name=DC.title content=Assessing the Multiple Benefits of Clean Energy Chapter 1: Introduction

MARKETING PROGRAMS FOR GREEN PRODUCTS IN ACHIEVING ECOLOGICAL SUSTAINABILITY

Directory of Open Access Journals (Sweden)

Gabriela CĂPĂȚÎNĂ

2015-04-01

Full Text Available This article explores one dimension of green marketing programs: their potential application as a solution in achieving and maintaining the ecological sustainability on global market. We examine the necessity to develop and launch green products which can respond to environment degradation as a treatment against this phenomenon. This paper is structured in three sections: the first section is related to a clear delimitation and a better understanding of terms; the second one is an overview of the literature about ecological sustainability; the third section is the most relevant part of this paper because is trying to shape a framework of marketing programs for the development of green products, considering the decisions related to marketing mix elements. Even if green marketing programs make sense, current understanding of how managers can start to develop or transform their marketing efforts is far from comprehensive; therefore, this study is addressed to this knowledge gap.

Management of Therapy Patients. Chapter 20

Energy Technology Data Exchange (ETDEWEB)

Dauer, L. T. [Department of Medical Physics, Memorial Sloan Kettering Cancer Center, New York (United States)

2014-12-15

The basic principles of radiation protection and their implementation as they apply to nuclear medicine are covered in general in Chapter 3. This chapter will look at the specific case of nuclear medicine used for therapy. In addition to the standards discussed in Chapter 3, specific guidance on the release of patients after radionuclide therapy can be found in the IAEA’s Safety Reports Series No. 63 [20.1]. When the patient is kept in hospital following radionuclide therapy, the people at risk of exposure include hospital staff whose duties may or may not directly involve the use of radiation. This can be a significant problem. However, it is generally felt that it can be effectively managed with well trained staff and appropriate facilities. On the other hand, once the patient has been released, the groups at risk include members of the patient’s family, including children, and carers; they may also include neighbours, visitors to the household, co-workers, those encountered in public places, on public transport or at public events, and finally, the general public. It is generally felt that these risks can be effectively mitigated by the radiation protection officer (RPO) with patient-specific radiation safety precaution instructions.

"This program contains product placement": Effects of sponsorship disclosure on television viewers’ responses

NARCIS (Netherlands)

Boerman, S.C.

2014-01-01

Television viewers are increasingly exposed to texts saying "This program contains product placement" or PP (short for product placement) logos incorporated in television programs. These so-called sponsorship disclosures aim to inform viewers about advertising that is embedded in television

Relevance and feasibility of women's involvement in promoting sustainable food production and security in Southern Africa

Directory of Open Access Journals (Sweden)

Never Assan

2014-09-01

Full Text Available Harnessing women’s potential for food production and security has been a challenge in Southern Africa. The face of food production in Southern Africa is often female, but more often than not, their roles are generally undervalued and constrained by gender inequalities and limitations on their access to resources, services, and market opportunities. This chapter explores how women involvement in food production can have a positive impact on food security in Southern Africa. The gender aspect of food security assume significance, as it is widely recognized that women are the custodian of food production in many communities in Southern Africa. There is a tendency of men and women participating unevenly in food production, have unequal access to productive resources and exhibit different levels of engagement in rural, urban and home-based food production. Despite this anomaly, there is still a common understanding that food production needs to be increased in order to cope with the increased human population and achieving food security in the region. With this in mind, food production and security have emerged as key development targets in Southern Africa. This has propelled the urgent need for promoting food production, reducing food insecurity and poverty reduction in its totality. One of the factors contributing to perpetual low food production and insecurity has been gender discrimination and/or lack of participation of women in agricultural programs and projects. In this chapter there is an attempt to describe the impact of gender-based discrimination on food production and its implication on food security. The indispensable role and challenges faced by women in food production are highlighted. The need to invest in education and training of women to support food production systems in order to accrue maximum benefit is acknowledged. In this regard, it is imperative that planning and implementation of any food production programs focusing on

Starting a Health Professions Education Graduate Program

Science.gov (United States)

Hansman, Catherine A.

2018-01-01

This chapter is a case story of the evolution of the Master of Education in Health Professions Education (MEHPE), a collaborative graduate program developed by the Adult Learning and Development program at Cleveland State University and the Cleveland Clinic.

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 4, Part B: Chapter 8, Sections 8.0 through 8.3.1.4

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 74 figs., 32 tabs.

Blending the Roles of Interpreter, Entrepreneur, Collaborator. A New Model for Conferences and Institutes Program Planners. The Guide Series.

Science.gov (United States)

Dahl, Carolyn Carson

This six-chapter guide suggests a new approach to describing the knowledge, competencies, and managerial roles inherent in planning effective conferences and institutes. Chapter 1 introduces the many roles of the conferences and institutes program planner and discusses program formats and what makes conference programs unique learning events.…

TMI-2 [Three Mile Island] fission product inventory program: FY-85 status report

International Nuclear Information System (INIS)

Langer, S.; Croney, S.T.; Akers, D.W.; Russell, M.L.

1986-11-01

This report presents the status of the TMI-2 fission product inventory program through May 1985. The fission product inventory program is an assessment of the location of fission products distributed in the plant as a result of the TMI-2 accident. Included in this report are principal results of samples from the reactor building where most of the mobile fission products (i.e., radiocesium and iodine) are expected to be found. The data are now complete enough for most reactor components; therefore, it is possible to direct the balance of the examination and sampling program to areas and components where it is likely to be most productive. Those areas are the reactor core and the reactor building basement, with emphasis on the currently unsampled portions of the core

UMTRA Project-Level Cost Reduction/Productivity Improvement Program manual

International Nuclear Information System (INIS)

1995-06-01

Mission of the Uranium Mill Tailings Remedial Action (UMTRA) Project Cost Reduction/Productivity Improvement Program (CR/PIP) is to contribute to the UMTRA Project's environmental restoration mission by providing the means to achieve and recognize continuous improvements and cost savings. This manual includes program definition, description of UMTRA project organizational responsibilities and interfaces with existing project functions, guidance to contractors, and definition of project-level functions

Environmental impacts of precision feeding programs applied in pig production.

Science.gov (United States)

Andretta, I; Hauschild, L; Kipper, M; Pires, P G S; Pomar, C

2017-12-04

This study was undertaken to evaluate the effect that switching from conventional to precision feeding systems during the growing-finishing phase would have on the potential environmental impact of Brazilian pig production. Standard life-cycle assessment procedures were used, with a cradle-to-farm gate boundary. The inputs and outputs of each interface of the life cycle (production of feed ingredients, processing in the feed industry, transportation and animal rearing) were organized in a model. Grain production was independently characterized in the Central-West and South regions of Brazil, whereas the pigs were raised in the South region. Three feeding programs were applied for growing-finishing pigs: conventional phase feeding by group (CON); precision daily feeding by group (PFG) (whole herd fed the same daily adjusted diet); and precision daily feeding by individual (PFI) (diets adjusted daily to match individual nutrient requirements). Raising pigs (1 t pig BW at farm gate) in South Brazil under the CON feeding program using grain cultivated in the same region led to emissions of 1840 kg of CO2-eq, 13.1 kg of PO4-eq and 32.2 kg of SO2-eq. Simulations using grain from the Central-West region showed a greater climate change impact. Compared with the previous scenario, a 17% increase in climate change impact was found when simulating with soybeans produced in Central-West Brazil, whereas a 28% increase was observed when simulating with corn and soybeans from Central-West Brazil. Compared with the CON feeding program, the PFG and PFI programs reduced the potential environmental impact. Applying the PFG program mitigated the potential climate change impact and eutrophication by up to 4%, and acidification impact by up to 3% compared with the CON program. Making a further adjustment by feeding pigs according to their individual nutrient requirements mitigated the potential climate change impact by up to 6% and the potential eutrophication and acidification impact

Chapter 1: Introduction. The Uniform Methods Project: Methods for Determining Energy-Efficiency Savings for Specific Measures

Energy Technology Data Exchange (ETDEWEB)

Li, Michael [Dept. of Energy (DOE), Washington DC (United States). Office of Energy Efficiency and Renewable Energy; Haeri, Hossein [The Cadmus Group, Portland, OR (United States); Reynolds, Arlis [The Cadmus Group, Portland, OR (United States)

2017-09-28

This chapter provides a set of model protocols for determining energy and demand savings that result from specific energy efficiency measures implemented through state and utility efficiency programs. The methods described here are approaches that are or are among the most commonly used and accepted in the energy efficiency industry for certain measures or programs. As such, they draw from the existing body of research and best practices for energy efficiency program evaluation, measurement, and verification (EM&V). These protocols were developed as part of the Uniform Methods Project (UMP), funded by the U.S. Department of Energy (DOE). The principal objective for the project was to establish easy-to-follow protocols based on commonly accepted methods for a core set of widely deployed energy efficiency measures.

Teaching, leadership, scholarly productivity, and level of activity in the chiropractic profession: a study of graduates of the Los Angeles College of Chiropractic radiology residency program.

Science.gov (United States)

Young, Kenneth J; Siordia, Lawrence

2012-12-01

The purpose of this study was to track the graduates of the Los Angeles College of Chiropractic (LACC) radiology residency program, review their scholarly productivity, and report those involved in teaching and leadership positions. Former LACC residents' career information was identified through publicly available electronic documents including Web sites and social media. PubMed and the Index to Chiropractic Literature databases were searched for chiropractic graduate job surveys, and proportional comparisons were made between the career paths of LACC radiology residency graduates and those of non-residency-trained chiropractors. Of 47 former LACC residents, 28 (60%) have or previously had careers in tertiary (chiropractic) education; and 12 (26%) have attained a department chair position or higher at tertiary teaching institutions. Twenty-two (47%) have or previously had private radiology practices, whereas 11 (23%) have or previously had clinical chiropractic practices. Often, residency graduates hold or have held 2 of these positions at once; and one, all 3. Chapters or books were authored by 13 (28%). Radiology residency LACC graduates are professionally active, particularly in education, and demonstrate scholarly productivity.

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 10: Communication, Education, and Outreach

OpenAIRE

Bardeen, M.; Cronin-Hennessy, D.; Barnett, R. M.; Bhat, P.; Cecire, K.; Cranmer, K.; Jordan, T.; Karliner, I.; Lykken, J.; Norris, P.; White, H.; Yurkewicz, K.

2014-01-01

These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 10, on Communication, Education, and Outreach, discusses the resources and issues for the communication of information about particle physics to teachers and students, to scientists in other fields, to policy makers, and to the general public.

ARIES Oxide Production Program Annual Report - FY14

Energy Technology Data Exchange (ETDEWEB)

Kelley, Evelyn A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dinehart, Steven Mark [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-02-01

A summary of the major accomplishments (September), milestones, financial summary, project performance and issues facing the ARIES Oxide Production Program at the close of FY14 is presented in this Executive Summary. Annual accomplishments are summarized in the body of the report.

Proposed recommendations for the reform of chapter 11 U.S. Bankruptcy Code

NARCIS (Netherlands)

Wessels, B.; de Weijs, R.

2015-01-01

The US Bankruptcy Code’s chapter 11 procedure is both in practice and conceptually the most important insolvency procedure worldwide. Many countries, including the Netherlands, look at Chapter 11 for inspiration in revising their own insolvency laws. Chapter 11 is, however, itself up for revision.

Consumer oriented new product development

DEFF Research Database (Denmark)

van Trijp, Hans C.M.; Grunert, Klaus G

2014-01-01

New product development is a necessary activity for a company’s competitiveness, profitability and growth. However, new product development is a risky activity as a large percentage of new product introductions fail to achieve their commercial targets. The present chapter reviews the existing...

MULTI-CRITERIA PROGRAMMING METHODS AND PRODUCTION PLAN OPTIMIZATION PROBLEM SOLVING IN METAL INDUSTRY

Directory of Open Access Journals (Sweden)

Tunjo Perić

2017-09-01

Full Text Available This paper presents the production plan optimization in the metal industry considered as a multi-criteria programming problem. We first provided the definition of the multi-criteria programming problem and classification of the multicriteria programming methods. Then we applied two multi-criteria programming methods (the STEM method and the PROMETHEE method in solving a problem of multi-criteria optimization production plan in a company from the metal industry. The obtained results indicate a high efficiency of the applied methods in solving the problem.

Fission product inventory calculation by a CASMO/ORIGEN coupling program

Energy Technology Data Exchange (ETDEWEB)

Kim, Do Heon; Kim, Jong Kyung [Hanyang University, Seoul (Korea, Republic of); Choi, Hang Bok; Roh, Gyu Hong; Jung, In Ha [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1998-12-31

A CASMO/ORIGEN coupling utility program was developed to predict the composition of all the fission products in spent PWR fuels. The coupling program reads the CASMO output file, modifies the ORIGEN cross section library and reconstructs the ORIGEN input file at each depletion step. In ORIGEN, the burnup equation is solved for actinides and fission products based on the fission reaction rates and depletion flux of CASMO. A sample calculation has been performed using a 14 x 14 PWR fuel assembly and the results are given in this paper. 3 refs., 1 fig., 1 tab. (Author)

Fission product inventory calculation by a CASMO/ORIGEN coupling program

Energy Technology Data Exchange (ETDEWEB)

Kim, Do Heon; Kim, Jong Kyung [Hanyang University, Seoul (Korea, Republic of); Choi, Hang Bok; Roh, Gyu Hong; Jung, In Ha [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1997-12-31

A CASMO/ORIGEN coupling utility program was developed to predict the composition of all the fission products in spent PWR fuels. The coupling program reads the CASMO output file, modifies the ORIGEN cross section library and reconstructs the ORIGEN input file at each depletion step. In ORIGEN, the burnup equation is solved for actinides and fission products based on the fission reaction rates and depletion flux of CASMO. A sample calculation has been performed using a 14 x 14 PWR fuel assembly and the results are given in this paper. 3 refs., 1 fig., 1 tab. (Author)

Chapter 8: Pyrolysis Mechanisms of Lignin Model Compounds Using a Heated Micro-Reactor

Energy Technology Data Exchange (ETDEWEB)

Robichaud, David J.; Nimlos, Mark R.; Ellison, G. Barney

2015-10-03

Lignin is an important component of biomass, and the decomposition of its thermal deconstruction products is important in pyrolysis and gasification. In this chapter, we investigate the unimolecular pyrolysis chemistry through the use of singly and doubly substituted benzene molecules that are model compounds representative of lignin and its primary pyrolysis products. These model compounds are decomposed in a heated micro-reactor, and the products, including radicals and unstable intermediates, are measured using photoionization mass spectrometry and matrix isolation infrared spectroscopy. We show that the unimolecular chemistry can yield insight into the initial decomposition of these species. At pyrolysis and gasification severities, singly substituted benzenes typically undergo bond scission and elimination reactions to form radicals. Some require radical-driven chain reactions. For doubly substituted benzenes, proximity effects of the substituents can change the reaction pathways.

Measurement of Inclusive Jet Cross Sections in Z/gamma*(->e+e-) + jets Production in ppbar Collisions at s**(1/2) = 1.96 TeV with the CDF Detector

International Nuclear Information System (INIS)

Salto Bauza, Oriol; Barcelona, IFAE

2008-01-01

This Ph.D. thesis presents the measurement of inclusive jet cross sections in Z/γ* → e + e - events using 1.7 fb -1 of data collected by the upgraded CDF detector during the Run II of the Tevatron. The Midpoint cone algorithm is used to search for jets in the events after identifying the presence of a Z/γ* boson through the reconstruction of its decay products. The measurements are compared to next-to-LO (NLO) pQCD predictions for events with one and two jets in the final state. The perturbative predictions are corrected for the contributions of non-perturbative processes, like the underlying event and the fragmentation of the partons into jets of hadrons. These processes are not described by perturbation theory and must be estimated from phenomenological models. In this thesis, a number of measurements are performed to test different models of underlying event and hadronization implemented in LO plus parton shower Monte Carlo generator programs. Chapter 2 is devoted to the description of the theory of strong interactions and jet phenomenology at hadron colliders. Chapter 3 contains the description of the Tevatron collider and the CDF detector. The analysis is described in detail in Chapter 4. Chapter 5 shows the measurement of those observables sensitive to non-perturbative effects compared to the predictions from several Monte Carlo programs. Chapter 6 discusses the final results and the comparison with theoretical expectations. Finally, Chapter 7 is devoted to the conclusions

Programed Instruction in Health Education and Physical Education.

Science.gov (United States)

Mayshark, Cyrus; Evaul, Thomas W.

This book contains eight chapters by several different authors, most of them professors of health or physical education. Focus is on applications and implications of programed instruction for professionals in the health and physical education fields. "Overview of Programed Instruction" defines programing, its development and implications for…

Behavioral service substitution (Chapter 9)

NARCIS (Netherlands)

Stahl, C.; Aalst, van der W.M.P.; Bouguettaya, A.; Sheng, Q.Z.; Daniel, F.

2014-01-01

Service-oriented design supports system evolution and encourages reuse and modularization. A key ingredient of service orientation is the ability to substitute one service by another without reconfiguring the overall system. This chapter aims to give an overview of the state of the art and open

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 5, Part B: Chapter 8, Sections 8.3.1.5 through 8.3.1.17

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the SOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules.

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 5, Part B: Chapter 8, Sections 8.3.1.5 through 8.3.1.17

International Nuclear Information System (INIS)

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the SOE's Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules

24 CFR 200.948 - Building product standards and certification program for carpet cushion.

Science.gov (United States)

2010-04-01

... Minimum Property Standards § 200.948 Building product standards and certification program for carpet... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and certification program for carpet cushion. 200.948 Section 200.948 Housing and Urban Development Regulations...

40 CFR 147.2500 - State-administered program.

Science.gov (United States)

2010-07-01

... State-administered program: (1) Chapter 144, Water, Sewage, Refuse, Mining and Air Pollution, Wisconsin... Section 147.2500 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Treatment Works, Wisconsin Administrative Code § 210.05 Natural Resources Board Order No. WQ-25-82, approved...

Nutritional content of food and beverage products in television advertisements seen on children's programming.

Science.gov (United States)

Powell, Lisa M; Schermbeck, Rebecca M; Chaloupka, Frank J

2013-12-01

Given the high rates of childhood obesity, assessing the nutritional content of food and beverage products in television (TV) advertisements to which children are exposed is important. TV ratings data for children 2-5 and 6-11 years of age were used to examine the nutritional content of food and beverage products in advertisements seen by children on all programming and children's programming (≥35% child-audience share). Nutritional content was assessed based on the federal Interagency Working Group (IWG) recommended nutrients to limit (NTL), including saturated fat, trans fat, sugar, and sodium. A total of 46.2% of 2- to 5-year-olds' and 43.5% of 6- to 11-year-olds' total exposure to food and beverage TV advertising was for ads seen on children's programming. Among children 2-5 and 6-11 years, respectively, 84.1 and 84.4% of ads seen on all programming and 95.8 and 97.3% seen on children's programming were for products high in NTL, and 97.8 and 98.1% of Children's Food and Beverage Advertising Initiative (CFBAI) company-member ads seen on children's programming were for products high in NTL, compared to 80.5 and 89.9% of non-CFBAI product ads. Most food and beverage products in TV ads seen by children do not meet the IWG nutrition recommendations and less than one half of such ads are covered by self-regulation. Products advertised on children's versus general-audience programming and by CFBAI- versus non-CFBAI-member companies are particularly of low nutritional quality, suggesting that self-regulation has not successfully protected children from exposure to advertising for unhealthy foods and that continued monitoring is required.

The elaboration of motor programs for the automation of letter production.

Science.gov (United States)

Thibon, Laurence Séraphin; Gerber, Silvain; Kandel, Sonia

2018-01-01

We investigated how children learn to write letters. Letter writing evolves from stroke-by-stroke to whole-letter programming. Children of ages 6 to 9 (N=98) wrote letters of varying complexity on a digitizer. At ages 6 and 7 movement duration, dysfluency and trajectory increased with stroke number. This indicates that the motor program they activated mainly coded information on stroke production. Stroke number affected the older children's production much less, suggesting that they programmed stroke chunks or the whole letter. The fact that movement duration and dysfluency decreased from ages 6 to 8, and remained stable at ages 8 and 9 suggests that automation of letter writing begins at age 8. Automation seems to require the elaboration of stroke chunks and/or letter-sized motor programs. Copyright © 2017 Elsevier B.V. All rights reserved.

Telemetry Standards, IRIG Standard 106-17, Chapter 22, Network Based Protocol Suite

Science.gov (United States)

2017-07-01

requirements. 22.2 Network Access Layer 22.2.1 Physical Layer Connectors and cable media should meet the electrical or optical properties required by the...Telemetry Standards, IRIG Standard 106-17 Chapter 22, July 2017 i CHAPTER 22 Network -Based Protocol Suite Acronyms...iii Chapter 22. Network -Based Protocol Suite

Raw materials for aluminium production

International Nuclear Information System (INIS)

Galushkin, N.V.

1995-01-01

This chapter of monograph is devoted to to raw materials which used in aluminium production. Therefore, the using of alumina, and fluoride salts in aluminium production was considered. The physical properties of alumina were studied.

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 8, Part B: Chapter 8, Sections 8.3.5 through 8.3.5.20

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 68 figs., 102 tabs.

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 8, Part B: Chapter 8, Sections 8.4 through 8.7; Glossary and Acronyms

International Nuclear Information System (INIS)

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Section 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE's Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 88 figs., 42 tabs

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 6, Part B: Chapter 8, Sections 8.3.2 through 8.3.4.4

International Nuclear Information System (INIS)

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE's Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 35 figs., 70 tabs

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 8, Part B: Chapter 8, Sections 8.3.5 through 8.3.5.20

International Nuclear Information System (INIS)

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE's Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 68 figs., 102 tabs

Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 8, Part B: Chapter 8, Sections 8.4 through 8.7; Glossary and Acronyms

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-01

This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Section 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 88 figs., 42 tabs.

Mirror Lake: Past, present and future: Chapter 6

Science.gov (United States)

Likens, Gene E.; LaBaugh, James W.; Winter, Thomas C.; Likens, Gene E.

2009-01-01

This chapter discusses the hydrological and biogeochemical characteristics of Mirror Lake and the changes that resulted from air-land-water interactions and human activities. Since the formation of Mirror Lake, both the watershed and the lake have undergone many changes, such as vegetation development and basin filling. These changes are ongoing, and Mirror Lake is continuing along an aging pathway and ultimately, it will fill with sediment and no longer be a lake. The chapter also identifies major factors that affected the hydrology and biogeochemistry of Mirror Lake: acid rain, atmospheric deposition of lead and other heavy metals, increased human settlement around the lake, the construction of an interstate highway through the watershed of the Northeast Tributary, the construction of an access road through the West and Northeast watersheds to the lake, and climate change. The chapter also offers future recommendations for management and protection of Mirror Lake.

Moderator Chemistry Program

International Nuclear Information System (INIS)

Dewitt, L.V.; Gibbs, A.; Lambert, D.P.; Bohrer, S.R.; Fanning, R.L.; Houston, M.W.; Stinson, S.L.; Deible, R.W.; Abdel-Khalik, S.I.

1990-11-01

Over the past fifteen months, the Systems Chemistry Group of the Reactor Engineering Department has undertaken a comprehensive study of the Department's moderator chemistry program at Savannah River Site (SRS). An internal review was developed to formalize and document this program. Objectives were as outlined in a mission statement and action plan. In addition to the mission statement and action plan, nine separate task reports have been issued during the course of this study. Each of these task reports is included in this document as a chapter. This document is an organized compilation of the individual reports issued by the Systems Chemistry Group in assessment of SRS moderator chemistry to determine if there were significant gaps in the program as ft existed in October, 1989. While these reviews found no significant gaps in that mode of operation, or any items that adversely affected safety, items were identified that could be improved. Many of the items have already been dear with or are in the process of completion under this Moderator Chemistry Program and other Reactor Restart programs. A complete list of the items of improvement found under this assessment is found in Chapter 9, along with a proposed time table for correcting remaining items that can be improved for the chemistry program of SRS reactors. An additional external review of the moderator chemistry processes, recommendations, and responses to/from the Reactor Corrosion Mitigation Committee is included as Appendix to this compilation

Economic analysis of different mulch applications and irrigation programs in apple production

Directory of Open Access Journals (Sweden)

Dilek Karamürsel

2017-12-01

Full Text Available Economic analysis of different mulch materials and irrigation programs on Fuji apple variety grafted onto M9 rootstock was made in this study. Mulch treatments consisted of four different mulch materials including black textile, wheat straw, rose oil processing wastes and no mulch. There were three different irrigation programs for each mulch treatment. Irrigation programs also consisted of three different programs including starting irrigation when available water holding capacity of 20%, 40% and 60% at the effective root zone. Total production costs had fluctuating according to treatments. While rose oil processing and the program starting irrigation when available water holding capacity of 60% at the root zone was used had the lowest total production costs, wheat straw and the program starting irrigation when available water holding capacity of 20% at the root zone was used had the highest values. But, black textile mulch and the program which starting at irrigation when available water holding capacity of 20% at the root zone was used had the lowest unit production cost with 0.39 TL kg-1 highest yield, extra and class I fruits. Furthermore, according to apple marketing prices of 2014, considering yield and fruit quality, the highest gross profit with 51 223 TL ha-1 was obtained from black textile mulch and the program starting irrigation when available water holding capacity of 20% at the root zone was used.

Students' guide to program design

CERN Document Server

Robertson, Lesley Anne

1992-01-01

Students' Guide to Program Design is a textbook on program design. This textbook approaches program design by using structures programming techniques and pseudocode to develop a solution algorithm. Divided into 10 chapters, the book begins with a basic explanation of structured programming techniques, top-down development, and modular design. This discussion is followed by detailed concepts of the syntax of pseudocode; methods of defining the problem; the application of basic control structures in the development of the solution algorithm; desk checking techniques; hierarchy charts; and module

Chemical Tracer Methods: Chapter 7

Science.gov (United States)

Healy, Richard W.

2017-01-01

Tracers have a wide variety of uses in hydrologic studies: providing quantitative or qualitative estimates of recharge, identifying sources of recharge, providing information on velocities and travel times of water movement, assessing the importance of preferential flow paths, providing information on hydrodynamic dispersion, and providing data for calibration of water flow and solute-transport models (Walker, 1998; Cook and Herczeg, 2000; Scanlon et al., 2002b). Tracers generally are ions, isotopes, or gases that move with water and that can be detected in the atmosphere, in surface waters, and in the subsurface. Heat also is transported by water; therefore, temperatures can be used to trace water movement. This chapter focuses on the use of chemical and isotopic tracers in the subsurface to estimate recharge. Tracer use in surface-water studies to determine groundwater discharge to streams is addressed in Chapter 4; the use of temperature as a tracer is described in Chapter 8.Following the nomenclature of Scanlon et al. (2002b), tracers are grouped into three categories: natural environmental tracers, historical tracers, and applied tracers. Natural environmental tracers are those that are transported to or created within the atmosphere under natural processes; these tracers are carried to the Earth’s surface as wet or dry atmospheric deposition. The most commonly used natural environmental tracer is chloride (Cl) (Allison and Hughes, 1978). Ocean water, through the process of evaporation, is the primary source of atmospheric Cl. Other tracers in this category include chlorine-36 (36Cl) and tritium (3H); these two isotopes are produced naturally in the Earth’s atmosphere; however, there are additional anthropogenic sources of them.

Chapter 13. Exploring Use of the Reserved Core

Energy Technology Data Exchange (ETDEWEB)

Holmen, John [Univ. of Utah, Salt Lake City, UT (United States). SCI Inst. and School of Computing; Humphrey, Alan [Univ. of Utah, Salt Lake City, UT (United States). SCI Inst. and School of Computing; Berzins, Martin [Univ. of Utah, Salt Lake City, UT (United States). SCI Inst. and School of Computing

2015-07-29

In this chapter, we illustrate benefits of thinking in terms of thread management techniques when using a centralized scheduler model along with interoperability of MPI and PThread. This is facilitated through an exploration of thread placement strategies for an algorithm modeling radiative heat transfer with special attention to the 61st core. This algorithm plays a key role within the Uintah Computational Framework (UCF) and current efforts taking place at the University of Utah to model next-generation, large-scale clean coal boilers. In such simulations, this algorithm models the dominant form of heat transfer and consumes a large portion of compute time. Exemplified by a real-world example, this chapter presents our early efforts in porting a key portion of a scalability-centric codebase to the Intel Xeon Phi coprocessor. Specifically, this chapter presents results from our experiments profiling the native execution of a reverse Monte-Carlo ray tracing-based radiation model on a single coprocessor. These results demonstrate that our fastest run configurations utilized the 61st core and that performance was not profoundly impacted when explicitly oversubscribing the coprocessor operating system thread. Additionally, this chapter presents a portion of radiation model source code, a MIC-centric UCF cross-compilation example, and less conventional thread management technique for developers utilizing the PThreads threading model.

Space program management methods and tools

CERN Document Server

Spagnulo, Marcello; Balduccini, Mauro; Nasini, Federico

2013-01-01

Beginning with the basic elements that differentiate space programs from other management challenges, Space Program Management explains through theory and example of real programs from around the world, the philosophical and technical tools needed to successfully manage large, technically complex space programs both in the government and commercial environment. Chapters address both systems and configuration management, the management of risk, estimation, measurement and control of both funding and the program schedule, and the structure of the aerospace industry worldwide.

Manufacturing of Proteins and Antibodies: Chapter Downstream Processing Technologies : Harvest Operations.

Science.gov (United States)

Turner, Richard; Joseph, Adrian; Titchener-Hooker, Nigel; Bender, Jean

2017-08-04

Cell harvesting is the separation or retention of cells and cellular debris from the supernatant containing the target molecule Selection of harvest method strongly depends on the type of cells, mode of bioreactor operation, process scale, and characteristics of the product and cell culture fluid. Most traditional harvesting methods use some form of filtration, centrifugation, or a combination of both for cell separation and/or retention. Filtration methods include normal flow depth filtration and tangential flow microfiltration. The ability to scale down predictably the selected harvest method helps to ensure successful production and is critical for conducting small-scale characterization studies for confirming parameter targets and ranges. In this chapter we describe centrifugation and depth filtration harvesting methods, share strategies for harvest optimization, present recent developments in centrifugation scale-down models, and review alternative harvesting technologies.

Chapter 6: The scientific basis for conserving forest carnivores: considerations for management

Science.gov (United States)

L. Jack Lyon; Keith B. Aubry; William J. Zielinski; Steven W. Buskirk; Leonard F. Ruggiero

1994-01-01

The reviews presented in previous chapters reveal substantial gaps in our knowledge about marten, fisher, lynx, and wolverine. These gaps severely constrain our ability to design reliable conservation strategies. This problem will be explored in depth in Chapter 7. In this chapter, our objective is to discuss management considerations resulting from what we currently...

NCAA Drug-Testing Program 2010-11

Science.gov (United States)

National Collegiate Athletic Association (NJ1), 2010

2010-01-01

The National Collegiate Athletic Association (NCAA) Drug-Testing Program was created to protect the health and safety of student-athletes and to ensure that no one participant might have an artificially induced advantage or be pressured to use chemical substances. This publication describes this program in the following chapters: (1) NCAA…

Chapter 5: Monitoring results

DEFF Research Database (Denmark)

Poel, Bart; Thomsen, Kirsten Engelund; Schultz, Jørgen Munthe

2003-01-01

The monitoring results from the IEA Task 13 project "Advanced solar low energy houses" are described in this chapter. The underlying information was collected in the form of questionnaires. The questionnaires were formulated in such a way that participants are provided with a uniform lay......-out to fill in their particular results. Thus it is possible to compare the performances measured, calculated or predicted for the different houses....

FISPRO: a simplified computer program for general fission product formation and decay calculations

International Nuclear Information System (INIS)

Jiacoletti, R.J.; Bailey, P.G.

1979-08-01

This report describes a computer program that solves a general form of the fission product formation and decay equations over given time steps for arbitrary decay chains composed of up to three nuclides. All fission product data and operational history data are input through user-defined input files. The program is very useful in the calculation of fission product activities of specific nuclides for various reactor operational histories and accident consequence calculations

Hood River Production Program Review, Final Report 1991-2001.

Energy Technology Data Exchange (ETDEWEB)

Underwood, Keith; Chapman, Colin; Ackerman, Nicklaus

2003-12-01

This document provides a comprehensive review of Bonneville Power Administration (BPA) funded activities within the Hood River Basin from 1991 to 2001. These activities, known as the Hood River Production Program (HRPP), are intended to mitigate for fish losses related to operation of federal dams in the Columbia River Basin, and to contribute to recovery of endangered and/or threatened salmon and steelhead, as directed by Nation Oceanic and Atmospheric Administration - Fisheries (NOAA Fisheries). The Environmental Impact Statement (EIS) for the HRPP, which authorized BPA to fund salmon and steelhead enhancement activities in the Hood River Basin, was completed in 1996 (BPA 1996). The EIS specified seven years of monitoring and evaluation (1996-2002) after program implementation to determine if program actions needed modification to meet program objectives. The EIS also called for a program review after 2002, that review is reported here.

Improving Reading Achievement of Chapter 1 Pull-Out Students through Self-Esteem Building Classes Involving Buddy Group and Teacher Participation.

Science.gov (United States)

Hershfield, Marlene

A practicum attempted to improve the low reading achievement of Chapter 1 students in a low socioeconomic fifth-grade class by implementing a self-esteem building program. Activities were designed in a workbook format to complement class instruction in self-esteem building exercises. An emphasis on critical thinking skills was incorporated into…

Nutritional Content of Food and Beverage Products in Television Advertisements Seen on Children's Programming

Science.gov (United States)

Schermbeck, Rebecca M.; Chaloupka, Frank J.

2013-01-01

Abstract Background: Given the high rates of childhood obesity, assessing the nutritional content of food and beverage products in television (TV) advertisements to which children are exposed is important. Methods: TV ratings data for children 2–5 and 6–11 years of age were used to examine the nutritional content of food and beverage products in advertisements seen by children on all programming and children's programming (≥35% child-audience share). Nutritional content was assessed based on the federal Interagency Working Group (IWG) recommended nutrients to limit (NTL), including saturated fat, trans fat, sugar, and sodium. Results: A total of 46.2% of 2- to 5-year-olds' and 43.5% of 6- to 11-year-olds' total exposure to food and beverage TV advertising was for ads seen on children's programming. Among children 2–5 and 6–11 years, respectively, 84.1 and 84.4% of ads seen on all programming and 95.8 and 97.3% seen on children's programming were for products high in NTL, and 97.8 and 98.1% of Children's Food and Beverage Advertising Initiative (CFBAI) company-member ads seen on children's programming were for products high in NTL, compared to 80.5 and 89.9% of non-CFBAI product ads. Conclusions: Most food and beverage products in TV ads seen by children do not meet the IWG nutrition recommendations and less than one half of such ads are covered by self-regulation. Products advertised on children's versus general-audience programming and by CFBAI- versus non-CFBAI-member companies are particularly of low nutritional quality, suggesting that self-regulation has not successfully protected children from exposure to advertising for unhealthy foods and that continued monitoring is required. PMID:24206260

External costs of electricity production under scrutiny

International Nuclear Information System (INIS)

Wagner, H.J.; Melchert, A.

1993-01-01

After a short introduction into the problems and questions surrounding the issue of external costs Chapter 2 presents the most important results of the studies under review and analysis in this work. Occasionally, minor discrepancies were found between the results given in the summary of a study and the data reported in the relevant chapters. Chapter 3 identifies and discusses differences in perspective between the studies under consideration. Chapter 4 analyses the most important premises and parameters adopted in the studies for the calculation of overall costs and net benefits of the different modes of electricity production. This serves to probe the reliability of the data, plausibility of the premises, and nature of the presupposed relationships. Chapter 5 examines the relationships of time assumed in the studies and gives a first comment on the more advanced Prognos study. Chapter 6, finally, offers a summarizing evaluation. (orig./UA) [de

ARIES Oxide Production Program Assessment of Risk to Long-term Sustainable Production Rate

Energy Technology Data Exchange (ETDEWEB)

Whitworth, Julia [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lloyd, Jane Alexandria [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Majors, Harry W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-05-04

This report describes an assessment of risks and the development of a risk watch list for the ARIES Oxide Production Program conducted in the Plutonium Facility at LANL. The watch list is an active list of potential risks and opportunities that the management team periodically considers to maximize the likelihood of program success. The initial assessments were made in FY 16. The initial watch list was reviewed in September 2016. The initial report was not issued. Revision 1 has been developed based on management review of the original watch list and includes changes that occurred during FY-16.

77 FR 46805 - Small Business Innovation Research Program Policy Directive

Science.gov (United States)

2012-08-06

... Vol. 77 Monday, No. 151 August 6, 2012 Part II Small Business Administration 13 CFR Chapter I Small Business Innovation Research Program Policy Directive; Small Business Technology Transfer Program Policy Directive; Small Business Innovation Research (SBIR) Program and Small Business Technology...

Clojure reactive programming

CERN Document Server

Borges, Leonardo

2015-01-01

If you are a Clojure developer who is interested in using Reactive Programming to build asynchronous and concurrent applications, this book is for you. Knowledge of Clojure and Leiningen is required. Basic understanding of ClojureScript will be helpful for the web chapters, although it is not strictly necessary.

Defense Leadership and Management Program (DLAMP)

National Research Council Canada - National Science Library

Ramp, S

1997-01-01

This Directive, under Chapters 23, 33, 41, and 71 of title 5, United States Code, establishes policy and assigns responsibilities for a program of civilian leader training, education, and development...

Development of HyPEP, A Hydrogen Production Plant Efficiency Calculation Program

International Nuclear Information System (INIS)

Lee, Young Jin; Park, Ji Won; Lee, Won Jae; Shin, Young Joon; Kim, Jong Ho; Hong, Sung Deok; Lee, Seung Wook; Hwang, Moon Kyu

2007-12-01

Development of HyPEP program for assessing the steady-state hydrogen production efficiency of the nuclear hydrogen production facilities was carried out. The main developmental aims of the HyPEP program are the extensive application of the GUI for enhanced user friendliness and the fast numerical solution scheme. These features are suitable for such calculations as the optimisation calculations. HyPEP was developed with the object-oriented programming techniques. The components of the facility was modelled as objects in a hierarchical structure where the inheritance property of the object oriented program were extensively applied. The Delphi program language which is based on the Object Pascal was used for the HyPEP development. The conservation equations for the thermal hydraulic flow network were setup and the numerical solution scheme was developed and implemented into HyPEP beta version. HyPEP beta version has been developed with working GUI and the numerical solution scheme implementation. Due to the premature end of this project the fully working version of HyPEP was not produced

Database Application for a Youth Market Livestock Production Education Program

Science.gov (United States)

Horney, Marc R.

2013-01-01

This article offers an example of a database designed to support teaching animal production and husbandry skills in county youth livestock programs. The system was used to manage production goals, animal growth and carcass data, photos and other imagery, and participant records. These were used to produce a variety of customized reports to help…

Basic Radiation Detectors. Chapter 6

Energy Technology Data Exchange (ETDEWEB)

Van Eijk, C. W.E. [Faculty of Applied Sciences, Delft University of Technology, Delft (Netherlands)

2014-12-15

Radiation detectors are of paramount importance in nuclear medicine. The detectors provide a wide range of information including the radiation dose of a laboratory worker and the positron emission tomography (PET) image of a patient. Consequently, detectors with strongly differing specifications are used. In this chapter, general aspects of detectors are discussed.

Chapter 3: Traceability and uncertainty

International Nuclear Information System (INIS)

McEwen, Malcolm

2014-01-01

Chapter 3 presents: an introduction; Traceability (measurement standard, role of the Bureau International des Poids et Mesures, Secondary Standards Laboratories, documentary standards and traceability as process review); Uncertainty (Example 1 - Measurement, M raw (SSD), Example 2 - Calibration data, N D.w 60 Co, kQ, Example 3 - Correction factor, P TP ) and Conclusion

24 CFR 200.950 - Building product standards and certification program for solar water heating system.

Science.gov (United States)

2010-04-01

... PROGRAMS Minimum Property Standards § 200.950 Building product standards and certification program for...) concerning labeling of a product, the administrator's validation mark and the manufacturer's certification of... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and...

77 FR 28673 - Energy Conservation Program for Consumer Products: Test Procedures for Residential Furnace Fans

Science.gov (United States)

2012-05-15

... multipliers based on climate, consumer behavior assumptions, and product characteristics (e.g., multi-stage or... Conservation Program for Consumer Products: Test Procedures for Residential Furnace Fans; Proposed Rule #0;#0... Conservation Program for Consumer Products: Test Procedures for Residential Furnace Fans AGENCY: Office of...

75 FR 57410 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

Science.gov (United States)

2010-09-21

..., regarding the Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products... [Docket No. EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment; Correction AGENCY...

Labeling of Pesticide Products under the National Organic Program

Science.gov (United States)

This notice describes how registrants can obtain EPA approval of label language indicating that all ingredients in a pesticide product and all uses of that pesticide meet the criteria defined in the USDA National Organic Program Rule.

21 CFR 350.50 - Labeling of antiperspirant drug products.

Science.gov (United States)

2010-04-01

...: ‘dampness,’ ‘perspiration,’ ‘sweat,’ ‘sweating,’ or ‘wetness’] due to stress”. (3) For products that... this chapter for definition of bullet. (ii) The warning required by § 369.21 of this chapter for drugs...

The reinvigorated South African GRSS Chapter

CSIR Research Space (South Africa)

Schwegmann, Colin P

2017-09-01

Full Text Available Looking ahead, the South African GRSS Chapter is investigating the possibility of organizing a meeting with local GRSS members, universities, and other remote-sensing organizations with the purpose of engaging undergraduate and early postgraduate...

Technical data summary: Uranium(IV) production using a large scale electrochemical cell

International Nuclear Information System (INIS)

Hsu, T.C.

1984-05-01

This Technical Data Summary outlines an electrochemical process to produce U(IV), in the form of uranous nitrate, from U(VI), as uranyl nitrate. U(IV) with hydrazine could then be used as an alternative plutonium reductant to substantially reduce the waste volume from the Purex solvent extraction process. This TDS is divided into three parts. The first part (Chapters I to IV) generally describes the electrochemical production of U(IV). The second part (Chapters V to VII) describes a pilot scale U(IV) production facility that was constructed and operated at an engineering semiworks area of SRP, referred to as TNX. The lst part (Chapter VIII) describes a preliminary design for a full-scale facility that would meet the projected need for U(IV) as a reductant in SRP's separations processes. The preliminary design was described in a Basic Data Summary for the U(IV) production facility, and a Venture Guidance Appraisal (VGA) was prepared from the Basic Data Summary. The VGA for the U(IV) process showed that because of the large capital investment required, this approach to waste reduction was not economically competitive with another alternative that required only modifying the ongoing Purex process at no additional capital cost. However, implementing he U(IV) process as part of an overall canyon renovation, presently scheduled for the 1990's, may be economically attractive. The purpose of this TDS is therefore to bring together the information and experience obtained thus far in the U(IV) program so that a useful body of information will be available to support any future development of this process

Integer programming theory, applications, and computations

CERN Document Server

Taha, Hamdy A

1975-01-01

Integer Programming: Theory, Applications, and Computations provides information pertinent to the theory, applications, and computations of integer programming. This book presents the computational advantages of the various techniques of integer programming.Organized into eight chapters, this book begins with an overview of the general categorization of integer applications and explains the three fundamental techniques of integer programming. This text then explores the concept of implicit enumeration, which is general in a sense that it is applicable to any well-defined binary program. Other

Chapter 6: Wood energy and competing wood product markers

Science.gov (United States)

Kenneth E. Skog; Robert C. Abt; Karen Abt

2014-01-01

Understanding the effect of expanding wood energy markets is important to all wood-dependent industries and to policymakers debating the implementation of public programs to support the expansion of wood energy generation. A key factor in determining the feasibility of wood energy projects (e.g. wood boiler or pellet plant) is the long-term (i.e. 20-30year) supply...

76 FR 24761 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

Science.gov (United States)

2011-05-02

... Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and...) Certification. Each manufacturer, before distributing in commerce any basic model of a covered product or.... EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and...

Minimization of entropy production in separate and connected process units

Energy Technology Data Exchange (ETDEWEB)

Roesjorde, Audun

2004-08-01

The objective of this thesis was to further develop a methodology for minimizing the entropy production of single and connected chemical process units. When chemical process equipment is designed and operated at the lowest entropy production possible, the energy efficiency of the equipment is enhanced. We have found for single process units that the entropy production could be reduced with up to 20-40%, given the degrees of freedom in the optimization. In processes, our results indicated that even bigger reductions were possible. The states of minimum entropy production were studied and important painter's for obtaining significant reductions in the entropy production were identified. Both from sustain ability and economical viewpoints knowledge of energy efficient design and operation are important. In some of the systems we studied, nonequilibrium thermodynamics was used to model the entropy production. In Chapter 2, we gave a brief introduction to different industrial applications of nonequilibrium thermodynamics. The link between local transport phenomena and overall system description makes nonequilibrium thermodynamics a useful tool for understanding design of chemical process units. We developed the methodology of minimization of entropy production in several steps. First, we analyzed and optimized the entropy production of single units: Two alternative concepts of adiabatic distillation; diabatic and heat-integrated distillation, were analyzed and optimized in Chapter 3 to 5. In diabatic distillation, heat exchange is allowed along the column, and it is this feature that increases the energy efficiency of the distillation column. In Chapter 3, we found how a given area of heat transfer should be optimally distributed among the trays in a column separating a mixture of propylene and propane. The results showed that heat exchange was most important on the trays close to the re boiler and condenser. In Chapter 4 and 5, we studied how the entropy

Guide for Operational Configuration Management Program including the adjunct programs of design reconstitution and material condition and aging management

International Nuclear Information System (INIS)

1993-11-01

This standard presents program criteria and implementation guidance for an operational configuration management program for DOE nuclear and non-nuclear facilities in the operational phase. Portions of this standard are also useful for other DOE processes, activities, and programs. This Part 1 contains foreword, glossary, acronyms, bibliography, and Chapter 1 on operational configuration management program principles. Appendices are included on configuration management program interfaces, and background material and concepts for operational configuration management

The application of dynamic programming in production planning

Science.gov (United States)

Wu, Run

2017-05-01

Nowadays, with the popularity of the computers, various industries and fields are widely applying computer information technology, which brings about huge demand for a variety of application software. In order to develop software meeting various needs with most economical cost and best quality, programmers must design efficient algorithms. A superior algorithm can not only soul up one thing, but also maximize the benefits and generate the smallest overhead. As one of the common algorithms, dynamic programming algorithms are used to solving problems with some sort of optimal properties. When solving problems with a large amount of sub-problems that needs repetitive calculations, the ordinary sub-recursive method requires to consume exponential time, and dynamic programming algorithm can reduce the time complexity of the algorithm to the polynomial level, according to which we can conclude that dynamic programming algorithm is a very efficient compared to other algorithms reducing the computational complexity and enriching the computational results. In this paper, we expound the concept, basic elements, properties, core, solving steps and difficulties of the dynamic programming algorithm besides, establish the dynamic programming model of the production planning problem.

Programming Algol

CERN Document Server

Malcolme-Lawes, D J

2014-01-01

Programming - ALGOL describes the basics of computer programming using Algol. Commands that could be added to Algol and could increase its scope are described, including multiplication and division and the use of brackets. The idea of labeling or naming a command is also explained, along with a command allowing two alternative results. Most of the important features of Algol syntax are discussed, and examples of compound statements (that is, sets of commands enclosed by a begin ... end command) are given.Comprised of 11 chapters, this book begins with an introduction to the digital computer an

Non-Imaging Detectors and Counters. Chapter 10

Energy Technology Data Exchange (ETDEWEB)

Zanzonico, P. B. [Department of Medical Physics, Memorial Sloan Kettering Cancer Center, New York (United States)

2014-12-15

Historically, nuclear medicine has been largely an imaging based specialty, employing such diverse and increasingly sophisticated modalities as rectilinear scanning, (planar) gamma camera imaging, single photon emission computed tomography (SPECT) and positron emission tomography (PET). Non-imaging radiation detection, however, remains an essential component of nuclear medicine. This chapter reviews the operating principles, performance, applications and quality control (QC) of the various non-imaging radiation detection and measurement devices used in nuclear medicine, including survey meters, dose calibrators, well counters, intra-operative probes and organ uptake probes. Related topics, including the basics of radiation detection, statistics of nuclear counting, electronics, generic instrumentation performance parameters and nuclear medicine imaging devices, are reviewed in depth in other chapters of this book.

Chapter 10: Mining genome-wide genetic markers.

Directory of Open Access Journals (Sweden)

Xiang Zhang

Full Text Available Genome-wide association study (GWAS aims to discover genetic factors underlying phenotypic traits. The large number of genetic factors poses both computational and statistical challenges. Various computational approaches have been developed for large scale GWAS. In this chapter, we will discuss several widely used computational approaches in GWAS. The following topics will be covered: (1 An introduction to the background of GWAS. (2 The existing computational approaches that are widely used in GWAS. This will cover single-locus, epistasis detection, and machine learning methods that have been recently developed in biology, statistic, and computer science communities. This part will be the main focus of this chapter. (3 The limitations of current approaches and future directions.

Chapter 8: Final thought on safety

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

The chapter presents the objective of implementing and maintaining a good safety system: to prevent the occurrence of accidents and incidents (the abnormalities must be the exception) and if they occur their consequences should be mitigated. And make other considerations.

Peak capacity, peak-capacity production rate, and boiling point resolution for temperature-programmed GC with very high programming rates

Science.gov (United States)

Grall; Leonard; Sacks

2000-02-01

Recent advances in column heating technology have made possible very fast linear temperature programming for high-speed gas chromatography. A fused-silica capillary column is contained in a tubular metal jacket, which is resistively heated by a precision power supply. With very rapid column heating, the rate of peak-capacity production is significantly enhanced, but the total peak capacity and the boiling-point resolution (minimum boiling-point difference required for the separation of two nonpolar compounds on a nonpolar column) are reduced relative to more conventional heating rates used with convection-oven instruments. As temperature-programming rates increase, elution temperatures also increase with the result that retention may become insignificant prior to elution. This results in inefficient utilization of the down-stream end of the column and causes a loss in the rate of peak-capacity production. The rate of peak-capacity production is increased by the use of shorter columns and higher carrier gas velocities. With high programming rates (100-600 degrees C/min), column lengths of 6-12 m and average linear carrier gas velocities in the 100-150 cm/s range are satisfactory. In this study, the rate of peak-capacity production, the total peak capacity, and the boiling point resolution are determined for C10-C28 n-alkanes using 6-18 m long columns, 50-200 cm/s average carrier gas velocities, and 60-600 degrees C/min programming rates. It was found that with a 6-meter-long, 0.25-mm i.d. column programmed at a rate of 600 degrees C/min, a maximum peak-capacity production rate of 6.1 peaks/s was obtained. A total peak capacity of about 75 peaks was produced in a 37-s long separation spanning a boiling-point range from n-C10 (174 degrees C) to n-C28 (432 degrees C).

Classroom Programming: What Should Be Taught? Book 2. The Parent/Professional Partnership.

Science.gov (United States)

National Association for Retarded Citizens, Arlington, TX.

The second of three books written for parents, professionals, and others involved in educating severely and profoundly retarded children offers detailed information regarding educational programing in the public schools. Two chapters on the public schools and one chapter on residential institutions contain sections which address the following…

Computer program FPIP-REV calculates fission product inventory for U-235 fission

Science.gov (United States)

Brown, W. S.; Call, D. W.

1967-01-01

Computer program calculates fission product inventories and source strengths associated with the operation of U-235 fueled nuclear power reactor. It utilizes a fission-product nuclide library of 254 nuclides, and calculates the time dependent behavior of the fission product nuclides formed by fissioning of U-235.

Patterns of impact in the weatherization assistance program: A closer look

Energy Technology Data Exchange (ETDEWEB)

Berry, L.G.; Brown, M.A.

1994-06-01

In 1990, the US Department of Energy (DOE) initiated a nationwide evaluation of the Weatherization Program. The second phase of the Single-Family Study, which is the subject of this report, is part of this coordinated evaluation effort. In the first chapter the goals and overall design of the study are presented. Chapter 2 discussed methodology, the sample selection process, and data collection procedures. The following chapters (3, 4, and 5) compare the four sets of comparison groups. In Chapter 3, the results of extensive descriptions and measurements of dwelling characteristics, and of blower door, heating system efficiency, and carbon monoxide (CO) tests are compared for control, weatherized, and treated dwellings. In Chapter 4, characteristics of weatherized dwellings with especially high versus those with especially low energy savings are examined. Dwelling characteristic, the presence and amounts of specific weatherization measures, and occupant characteristics and behaviors are examined as factors that may explain variations in energy savings. Chapter 5 presents comparisons of pairs of higher- versus lower-savings agencies in each of several climate regions. These comparison examined differences in housing stocks, service delivery procedures, weatherization measures installed, and allocation of agency funds. The focus here is on the identification of more and less effective weatherization practices and of promising future directions for the Program. This report adds to the earlier one by comparing the practices of lower-savings agencies with those of the higher-saving ones. Chapter 6 compares occupant perceptions of comfort, health, safety, and energy affordability for the weatherized versus control group clients, for the high- versus low-saving dwellings, and the higher-versus lower-saving agencies. Chapter 7 summarizes this study`s findings and presents recommendations.

NCI Program for Natural Product Discovery: A Publicly-Accessible Library of Natural Product Fractions for High-Throughput Screening.

Science.gov (United States)

Thornburg, Christopher C; Britt, John R; Evans, Jason R; Akee, Rhone K; Whitt, James A; Trinh, Spencer K; Harris, Matthew J; Thompson, Jerell R; Ewing, Teresa L; Shipley, Suzanne M; Grothaus, Paul G; Newman, David J; Schneider, Joel P; Grkovic, Tanja; O'Keefe, Barry R

2018-06-13

The US National Cancer Institute's (NCI) Natural Product Repository is one of the world's largest, most diverse collections of natural products containing over 230,000 unique extracts derived from plant, marine, and microbial organisms that have been collected from biodiverse regions throughout the world. Importantly, this national resource is available to the research community for the screening of extracts and the isolation of bioactive natural products. However, despite the success of natural products in drug discovery, compatibility issues that make extracts challenging for liquid handling systems, extended timelines that complicate natural product-based drug discovery efforts and the presence of pan-assay interfering compounds have reduced enthusiasm for the high-throughput screening (HTS) of crude natural product extract libraries in targeted assay systems. To address these limitations, the NCI Program for Natural Product Discovery (NPNPD), a newly launched, national program to advance natural product discovery technologies and facilitate the discovery of structurally defined, validated lead molecules ready for translation will create a prefractionated library from over 125,000 natural product extracts with the aim of producing a publicly-accessible, HTS-amenable library of >1,000,000 fractions. This library, representing perhaps the largest accumulation of natural-product based fractions in the world, will be made available free of charge in 384-well plates for screening against all disease states in an effort to reinvigorate natural product-based drug discovery.

Optimization of production planning in Czech agricultural co-operative via linear programming

Directory of Open Access Journals (Sweden)

Jitka Janová

2009-01-01

Full Text Available The production planning is one of the key managerial decisions in agricultural business, which must be done periodically every year. Correct decision must cover the agriculture demands of planting the crops such as crop rotation restrictions or water resource scarcity, while the decision maker aims to plan the crop design in most profitable way in sense of maximizing the total profit from the crop yield. This decision problem represents the optimization of crop design and can be treated by the me­thods of linear programming which begun to be extensively used in agriculture production planning in USA during 50’s. There is ongoing research of mathematical programming applications in agriculture worldwide, but the results are not easily transferable to other localities due to the specific local restrictions in each country. In Czech Republic the farmers use for production planning mainly their expert knowledge and past experience. However, the mathematical programming approach enables find the true optimal solution of the problem, which especially in the problems with a great number of constraints is not easy to find intuitively. One of the possible barriers for using the general decision support systems (which are based on mathematical programming methods for agriculture production planning in Czech Republic is its expensiveness. The small farmer can not afford to buy the expensive software or to employ a mathematical programming specialist. The aim of this paper is to present a user friendly linear programming model of the typical agricultural production planning problem in Czech Republic which can be solved via software tools commonly available in any farm (e.g. EXCEL. The linear programming model covering the restrictions on total costs, crop rotation, thresholds for the total area sowed by particular crops, total amount of manure and the need of feed crops is developed. The model is applied in real-world problem of Czech agriculture

Special Topics in Radiography. Chapter 10

Energy Technology Data Exchange (ETDEWEB)

Mclean, I. D. [International Atomic Energy Agency, Vienna (Austria); Shepherd, J. A. [University of California at San Francisco, San Francisco, United States of America (United States)

2014-09-15

Up to this point, this handbook has described the use of X rays to form 2-D medical images of the 3-D patient. This process of reducing patient information by one dimension results in an image of superimposed tissues where important information might be obscured. Chapter 11 begins a section of the book involving the creation of cross-sectional medical images through computed tomography (CT), ultrasound and magnetic resonance imaging (MRI). This Chapter describes a number of special X ray imaging modalities and their associated techniques, and forms a transition between projection and cross-sectional imaging. The first of these special topics is dental radiography, which is characterized by a diversity of technology and innovation. The common intraoral radiograph of a single tooth has seen little fundamental change since the time of Roentgen and is, today, along with the simple chest radiograph, the most commonly performed radiographic examination. By contrast, the challenge to create an image of all the teeth simultaneously has placed dentistry at the cutting edge of technology, through the development of panographic techniques and, most recently, with the application of cone beam CT (CBCT). Moreover, the small size of the tooth and the consequent reduced need for X ray generation power promotes equipment mobility. The effect of the need for equipment mobility also forms a special topic that is examined in this chapter. Quantification of the composition of the body is another special X ray imaging technique. Dual energy X ray absorptiometry (DXA) is primarily used to derive the mass of one material in the presence of another, through knowledge of their unique X ray attenuation at different energies. DXA’s primary commercial application has been to measure body mineral density as an assessment of fracture risk and to diagnose osteoporosis; thus, the X ray energies used are optimized for bone density assessment. Currently, there are estimated to be over 50 000

Essays on sovereign bond pricing and inflation-linked products

NARCIS (Netherlands)

Simon, Zorka

2016-01-01

This doctoral dissertation consists of three chapters on the pricing of sovereign debt and inflation-linked products. The first chapter examines the relative pricing of nominal and inflation-linked debt of the three largest Eurozone sovereign issuers. Its main contribution is to present evidence of

Essays on Multinational Production and International Trade

DEFF Research Database (Denmark)

Clementi, Federico

This Thesis consists of an introduction followed by three independent chapters. Each chapter is a self-contained paper that can be read independently. They cover different topics of international economics with a specific focus on multinational production and international trade. A common feature...... the intensity of spillovers to local suppliers. Domestic firms benefit only from the activity of foreign clients that are not vertically integrated in their industry. In the last chapter, I use a detailed dataset of international transactions of Danish companies to study the impact of Chinese competition...

Chapter Leadership Profiles among Citizen Activists in the Drunk Driving Movement.

Science.gov (United States)

Ungerleider, Steven; Bloch, Steven

1987-01-01

Study of Mothers Against Drunk Drivers (MADD) analyzed the chapter emphasis, levels of satisfaction and relationship to national office on several measures. Surveying 212 chapters, MADD leadership provided profile of independent, autonomous activists in the drunk driving countermeasure movement. (Author)

Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume 1. Program summary

Energy Technology Data Exchange (ETDEWEB)

1979-12-01

This report summarizes the Nonproliferation Alternative Systems Assessment Program (NASAP): its background, its studies, and its results. This introductory chapter traces the growth of the issue of nuclear weapons proliferation and the organization and objectives of NASAP. Chapter 2 summarizes the program's assessments, findings and recommendations. Each of Volumes II-VII reports on an individual assessment (Volume II: Proliferation Resistance; Volume III: Resources and Fuel Cycle Facilities; Volume IV: Commercial Potential; Volume V: Economics and Systems Analysis; Volume VI: Safety and Environmental Considerations for Licensing; Volume VII: International Perspectives). Volume VIII (Advanced Concepts) presents a combined assessment of several less fully developed concepts, and Volume IX (Reactor and Fuel Cycle Descriptions) provides detailed descriptions of the reactor and fuel-cycle systems studied by NASAP.

Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume 1. Program summary

International Nuclear Information System (INIS)

1979-12-01

This report summarizes the Nonproliferation Alternative Systems Assessment Program (NASAP): its background, its studies, and its results. This introductory chapter traces the growth of the issue of nuclear weapons proliferation and the organization and objectives of NASAP. Chapter 2 summarizes the program's assessments, findings and recommendations. Each of Volumes II-VII reports on an individual assessment (Volume II: Proliferation Resistance; Volume III: Resources and Fuel Cycle Facilities; Volume IV: Commercial Potential; Volume V: Economics and Systems Analysis; Volume VI: Safety and Environmental Considerations for Licensing; Volume VII: International Perspectives). Volume VIII (Advanced Concepts) presents a combined assessment of several less fully developed concepts, and Volume IX (Reactor and Fuel Cycle Descriptions) provides detailed descriptions of the reactor and fuel-cycle systems studied by NASAP

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume I. Program summary

International Nuclear Information System (INIS)

1980-06-01

This report summarizes the Nonproliferation Alternative Systems Assessment Program (NASAP): its background, its studies, and its results. The introductory chapter traces the growth of the issue of nuclear weapons proliferation and the organization and objectives of NASAP. Chapter 2 summarizes the program's assessments, findings, and recommendations. Each of Volumes II-VII reports on an individual assessment (Volumn II: Proliferation Resistance; Volume III: Resources and Fuel Cycle Facilities; Volume IV: Commercial Potential; Volume V: Economics and Systems Analysis; Volume VI: Safety and Environmental Considerations for Licensing; Volume VII: International Perspectives). Volume VIII (Advanced Concepts) presents a combined assessment of several less fully developed concepts, and Volume IX (Reactor and Fuel Cycle Descriptions) provides detailed descriptions of the reactor and fuel-cycle systems studied by NASAP

Draft of chapters 4-9 as of May 11, 1979

International Nuclear Information System (INIS)

1979-05-01

A revised outline for the final report is given, and the first draft of chapters 4 - 9 are included. The chapters cover enrichment demands according to various fuel cycle strategies, comparison of enrichment demand and availability, assessment and comparison of the proliferation aspects of enrichment, assurance of supply, special needs of developing countries, and general conclusions

BOOK REVIEW: Advanced Topics in Computational Partial Differential Equations: Numerical Methods and Diffpack Programming

Science.gov (United States)

Katsaounis, T. D.

2005-02-01

The scope of this book is to present well known simple and advanced numerical methods for solving partial differential equations (PDEs) and how to implement these methods using the programming environment of the software package Diffpack. A basic background in PDEs and numerical methods is required by the potential reader. Further, a basic knowledge of the finite element method and its implementation in one and two space dimensions is required. The authors claim that no prior knowledge of the package Diffpack is required, which is true, but the reader should be at least familiar with an object oriented programming language like C++ in order to better comprehend the programming environment of Diffpack. Certainly, a prior knowledge or usage of Diffpack would be a great advantage to the reader. The book consists of 15 chapters, each one written by one or more authors. Each chapter is basically divided into two parts: the first part is about mathematical models described by PDEs and numerical methods to solve these models and the second part describes how to implement the numerical methods using the programming environment of Diffpack. Each chapter closes with a list of references on its subject. The first nine chapters cover well known numerical methods for solving the basic types of PDEs. Further, programming techniques on the serial as well as on the parallel implementation of numerical methods are also included in these chapters. The last five chapters are dedicated to applications, modelled by PDEs, in a variety of fields. The first chapter is an introduction to parallel processing. It covers fundamentals of parallel processing in a simple and concrete way and no prior knowledge of the subject is required. Examples of parallel implementation of basic linear algebra operations are presented using the Message Passing Interface (MPI) programming environment. Here, some knowledge of MPI routines is required by the reader. Examples solving in parallel simple PDEs using

Major commercial products from micro- and macroalgae

CSIR Research Space (South Africa)

Griffiths, M

2016-03-01

Full Text Available Macro- and microalgae are used in a variety of commercial products with many more in development. This chapter outlines the major products, species used, methods of production, extraction, and processing as well as market sizes and trends. Foods...

Equipment, components and production of x-ray

International Nuclear Information System (INIS)

Idris Besar

2004-01-01

The contents of this chapter are follows - Equipment, Components and Production of x-Ray: x-ray system, generator, control panel. x-ray tube, cathode, anode, envelope, housing, collimator, other components, x-ray production, Bremsstrahlung x-ray, characteristic x-ray, heat production

Annual review in automatic programming

CERN Document Server

Goodman, Richard

2014-01-01

Annual Review in Automatic Programming focuses on the techniques of automatic programming used with digital computers. Topics covered range from the design of machine-independent programming languages to the use of recursive procedures in ALGOL 60. A multi-pass translation scheme for ALGOL 60 is described, along with some commercial source languages. The structure and use of the syntax-directed compiler is also considered.Comprised of 12 chapters, this volume begins with a discussion on the basic ideas involved in the description of a computing process as a program for a computer, expressed in

Ostomy Home Skills Program

Medline Plus

Full Text Available ... Overview ACS-AEI Consortium Quarterly ACS Chapter News ... team with quality, comprehensive education. The standardized interactive program has been developed by the American College of Surgeons (ACS) in collaboration with the American Society of Colon and Rectal Surgeons (ASCRS), American Urological Association (AUA), ...

38 CFR 3.161 - Expedited Claims Adjudication Initiative-Pilot Program.

Science.gov (United States)

2010-07-01

... Adjudication Initiative-Pilot Program. 3.161 Section 3.161 Pensions, Bonuses, and Veterans' Relief DEPARTMENT... Claims § 3.161 Expedited Claims Adjudication Initiative—Pilot Program. Rules pertaining to the Expedited Claims Adjudication Initiative Pilot Program are set forth in part 20, subpart P, of this chapter...

Annual Coded Wire Tag Program; Oregon Missing Production Groups, 1994 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Garrison, Robert L.; Isaac, Dennis L.; Lewis, Mark A.

1994-12-01

The goal of this program is to develop the ability to estimate hatchery production survival values and evaluate effectiveness of Oregon hatcheries. To accomplish this goal. We are tagging missing production groups within hatcheries to assure each production group is identifiable to allow future evaluation upon recovery of tag data.

Biomass energy production in agriculture: A weighted goal programming analysis

International Nuclear Information System (INIS)

Ballarin, A.; Vecchiato, D.; Tempesta, T.; Marangon, F.; Troiano, S.

2011-01-01

Energy production from biomasses can be an important resource that, when combined with other green energies such as wind power and solar plants, can contribute to reduce dependency on fossil fuels. The aim of this study is to assess how agriculture could contribute to the production of bio-energy. A multi-period Weighted Goal Programming model (MpWGP) has been applied to identify the optimal land use combinations that simultaneously maximise farmers' income and biomass energy production under three concurrent constraints: water, labour and soil availability. Alternative scenarios are considered that take into account the effect of climate change and social change. The MpWGP model was tested with data from the Rovigo county area (Italy) over a 15-year time period. Our findings show that trade-off exists between the two optimisation targets considered. Although the optimisation of the first target requires traditional agricultural crops, which are characterised by high revenue and a low production of biomass energy, the latter would be achievable with intensive wood production, namely, high-energy production and low income. Our results also show the importance of the constraints imposed, particularly water availability; water scarcity has an overall negative effect and specifically affects the level of energy production. - Research Highlights: → The aim of this study is to assess how agriculture could contribute to the production of bio-energy. → A multi-period (15-year) Weighted Goal Programming model (MpWGP) has been applied. → We identify the optimal land use combinations that simultaneously maximise farmers' income and biomass energy production. → Three concurrent constraints have been considered: water, labour and soil availability.→ Water scarcity has an overall negative effect and specifically affects the level of energy production.

Quantitative Nuclear Medicine. Chapter 17

Energy Technology Data Exchange (ETDEWEB)

Ouyang, J.; El Fakhri, G. [Massachusetts General Hospital and Harvard Medical School, Boston (United States)

2014-12-15

Planar imaging is still used in clinical practice although tomographic imaging (single photon emission computed tomography (SPECT) and positron emission tomography (PET)) is becoming more established. In this chapter, quantitative methods for both imaging techniques are presented. Planar imaging is limited to single photon. For both SPECT and PET, the focus is on the quantitative methods that can be applied to reconstructed images.

Water resources (Chapter 5)

CSIR Research Space (South Africa)

Hobbs, Philip

2016-01-01

Full Text Available and relationships that inform the association between geology, shale gas and groundwater that is discussed in this Chapter. The mudstones and sandstones of the Adelaide Subgroup at the base of the Beaufort Group succession of sedimentary strata represent... migration to surface. The sedimentary rocks of the Ecca Group cover a further ~6% of the study area. In agreement with Rosewarne et al. (2013), who recognise a western, a central and an eastern subarea; this study recognises an additional southern subarea...

Analysis of the effect of risk management practices on the performance of new product development programs

DEFF Research Database (Denmark)

Oehmen, Josef; Olechowski, Alison; Kenley, C. Robert

2014-01-01

Risk management is receiving much attention, as it is seen as a method to improve cost, schedule, and technical performance of new product development programs. However, there is a lack of empirical research that investigates the effective integration of specific risk management practices proposed...... skills and resources; (2) Tailor risk management to and integrate it with new product development; (3) Quantify impacts of risks on your main objectives; (4) Support all critical decisions with risk management results; (5) Monitor and review your risks, risk mitigation actions, and risk management...... by various standards with new product development programs and their association with various dimensions of risk management success. Based on a survey of 291 product development programs, this paper investigates the association of risk management practices with five categories of product development program...

Implications of climate and land use change: Chapter 4

Science.gov (United States)

Hall, Jefferson S.; Murgueitio, Enrique; Calle, Zoraida; Raudsepp-Hearne, Ciara; Stallard, Robert F.; Balvanera, Patricia; Hall, Jefferson S.; Kirn, Vanessa; Yanguas-Fernandez, Estrella

2015-01-01

This chapter relates ecosystem services to climate change and land use. The bulk of the chapter focuses on ecosystem services and steepland land use in the humid Neotropics – what is lost with land-cover changed, and what is gained with various types of restoration that are sustainable given private ownership. Many case studies are presented later in the white paper. The USGS contribution relates to climate change and the role of extreme weather events in land-use planning.

Telemetry Standards, RCC Standard 106-17. Chapter 3. Frequency Division Multiplexing Telemetry Standards

Science.gov (United States)

2017-07-01

Standard 106-17 Chapter 3, July 2017 3-5 Table 3-4. Constant-Bandwidth FM Subcarrier Channels Frequency Criteria\\Channels: A B C D E F G H Deviation ...Telemetry Standards , RCC Standard 106-17 Chapter 3, July 2017 3-i CHAPTER 3 Frequency Division Multiplexing Telemetry Standards Acronyms...Frequency Division Multiplexing Telemetry Standards ................................ 3-1 3.1 General

Energy production, conversion, storage, conservation, and coupling

CERN Document Server

Demirel, Yaşar

2012-01-01

Understanding the sustainable use of energy in various processes is an integral part of engineering and scientific studies, which rely on a sound knowledge of energy systems. Whilst many institutions now offer degrees in energy-related programs, a comprehensive textbook, which introduces and explains sustainable energy systems and can be used across engineering and scientific fields, has been lacking. Energy: Production, Conversion, Storage, Conservation, and Coupling provides the reader with a practical understanding of these five main topic areas of energy including 130 examples and over 600 practice problems. Each chapter contains a range of supporting figures, tables, thermodynamic diagrams and charts, while the Appendix supplies the reader with all the necessary data including the steam tables. This new textbook presents a clear introduction of basic vocabulary, properties, forms, sources, and balances of energy before advancing to the main topic areas of: • Energy production and conversion in importa...

The w-categories associated with products of infinite-dimensional globes

International Nuclear Information System (INIS)

Cui, H.

2000-11-01

The results in this thesis are organised in four chapters. Chapter 1 is preliminary. We state the necessary definitions and results in w- complexes, atomic complexes and products of w-complexes. Some definitions are restated to meet the requirement for the following chapters. There is a new proof for the existence of 'natural homomorphism' (Theorem 1.3.6) and a new result for the decomposition of molecules in loop-free w-complexes (Theorem 1.4.13). In Chapter 2, we study the product of three infinite dimensional globes. The main result in this chapter is that a subcomplex in the product of three infinite dimensional globes is a molecule if and only if it is pairwise molecular (Theorem 2.1.6). The definition for pairwise molecular subcomplexes is given in section 1. One direction of the main theorem, molecules are necessarily pairwise molecular, is proved in section 2. Some properties of pairwise molecular subcomplexes are studied in section 3. These properties are the preparation for a more explicit description of pairwise molecular subcomplexes, which is given in section 4. The properties for the sources and targets of pairwise molecular subcomplexes are studied in section 5, where we prove that the class of pairwise molecular subcomplexes is closed under source and target operation; there are also algorithms to calculate the sources and targets of a pairwise molecular subcomplex. Section 6 deals with the composition of pairwise molecular subcomplexes. The proof of the main theorem is completed in section 7, where an algorithm for decomposing molecules into atoms is implied in the proof. The construction of molecules in the product of three infinite dimensional globes is studied in Chapter 3. The main result is that any molecule can be constructed inductively by a systematic approach. Section 1 gives another description for molecules in the product of three infinite dimensional globes which is the theoretical basis for the construction. Section 2 states the

The Innovation in Libraries Awesome Foundation Chapter

Directory of Open Access Journals (Sweden)

Joshua Finnell

2017-05-01

Full Text Available In Brief: This article discusses the creation, philosophy, and future directions of the Innovation in Libraries Awesome Foundation Chapter, a grassroots crowdfunding initiative incubated within Library Pipeline.

Strangeness production in Ni+Ni collisions at 1.93 AGeV; Production d'etrangete dans les collisions Ni+Ni a 1.93 AGeV

Energy Technology Data Exchange (ETDEWEB)

Lopez, X

2004-12-15

This work deals with the production of strange particles in Ni + Ni collisions at 1.93 A GeV detected with the Fopi (four pi) detector at the heavy ion synchrotron SIS (GSI - Germany). We have limited our investigation to the study of {lambda} and {xi} hyperons. The first chapter presents the models used to describe ultra-relativistic heavy ions collisions. In the second chapter we present the main experimental results concerning the production and transport of strange particles in an energy domain ranging from SIS to RHIC (relativistic heavy ion collider) energies. The third chapter is dedicated to the specificities of the Fopi detector. The fourth chapter deals with the production of {lambda} particles in Ni + Ni collisions. An analysis method based on neuron network has been used in parallel with a more classical method. The production rate and temperature of {lambda} have been deduced from both methods. The neuron network method gives a statistical gain and allows a better identification of particles with low transverse impulses. The fifth chapter is dedicated to the detection of the doubly strange {xi}{sup -} particle. A detailed study about the stability of the signal is presented. In the last chapter all our experimental results are confronted with theoretical predictions. The UrQMD model that uses a hard equation of state, can simulate satisfactorily the production rates of {lambda} and K{sup +} as well as their dependency on collision centrality despite the fact that this model does not use a potential linked to the medium density. The comparison between experimental results and predictions given by the IQMD model (that is based on a soft equation of state) is better when the version of the model that does not take into account the effects of the media is used. We see that the choices for the nuclear matter compressibility, for the particles involved in Kaon and {lambda} creation process, or for the interaction potential with dense medium, appear to be

Master schedule for CY-1980 Hanford Environmental Surveillance Routine Program

International Nuclear Information System (INIS)

Blumer, P.J.; Houston, J.R.; Eddy, P.A.

1979-12-01

The current schedule of data collection for the routine environmental surveillance program at the Hanford Site is presented. The enviromental surveillance program objectives are to evaluate the levels of radioactive and nonradioactive pollutants in the Hanford environs, as required in Manual Chapter 0513, and to monitor Hanford operations for compliance with applicable environmental criteria given in Manual Chapter 0524 and Washington State Water Quality Standards. Data are reported on the following topics: air; Columbia River; sanitary water; surface water; ground water; foodstuffs; wildlife; soil and vegetation; external radiation measurement; portable instrument surveys; and surveillance of waste disposal sites;

75 FR 52892 - Energy Conservation Program for Consumer Products: Test Procedures for Residential Water Heaters...

Science.gov (United States)

2010-08-30

... ``Energy Conservation Program for Consumer Products Other Than Automobiles,'' including residential water... final rule revising energy conservation standards for residential water heaters, direct heating.... EERE-2009-BT-TP-0013] RIN 1904-AB95 Energy Conservation Program for Consumer Products: Test Procedures...

78 FR 65629 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

Science.gov (United States)

2013-11-01

... representative of consumer behavior. For example, if the number of annual cycles results in greater than a 3-day... Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Whirlpool Corporation From... Conservation Program for Consumer Products Other Than Automobiles, a program covering most major household...

Academic Productivity of Faculty Associated With Craniofacial Surgery Fellowship Programs.

Science.gov (United States)

Ruan, Qing Zhao; Ricci, Joseph A; Silvestre, Jason; Ho, Olivia A; Ganor, Oren; Lee, Bernard T

2017-11-01

The H-index is increasingly being used as a measure of academic productivity and has been applied to various surgical disciplines. Here the authors calculate the H-index of craniofacial surgery fellowship faculty in North America in order to determine its utility for academic productivity among craniofacial surgeons. A list of fellowship programs was obtained from the website of the American Society of Craniofacial Surgery. Faculty demographics and institution characteristics were obtained from official program websites and the H-index was calculated using Scopus (Elsevier, USA). Data were assessed using bivariate analysis tools (Kruskal-Wallis and Mann-Whitney tests) to determine the relationship between independent variables and career publications, H-index and 5-year H-index (H5-index) of faculty. Dunn test for multiple comparisons was also calculated. A total of 102 faculty members from 29 craniofacial surgery fellowship programs were identified and included. Faculty demographics reflected a median age of 48 (interquartile range [IQR] 13), a predominantly male sample (88/102, 89.7%), and the rank of assistant professor being the most common among faculty members (41/102, 40.2%). Median of career publications per faculty was 37 (IQR 52.5) and medians of H-index and H5-index were 10.0 (IQR 13.75) and 3.5 (IQR 3.25), respectively. Greater age, male gender, Fellow of the American College of Surgeons membership, higher academic rank, and program affiliation with ranked research medical schools were significantly associated with higher H-indices. Variables associated with seniority were positively associated with the H-index. These results suggest that the H-index may be used as an adjunct in determining academic productivity for promotions among craniofacial surgeons.

HEINBE; the calculation program for helium production in beryllium under neutron irradiation

International Nuclear Information System (INIS)

Shimakawa, Satoshi; Ishitsuka, Etsuo; Sato, Minoru

1992-11-01

HEINBE is a program on personal computer for calculating helium production in beryllium under neutron irradiation. The program can also calculate the tritium production in beryllium. Considering many nuclear reactions and their multi-step reactions, helium and tritium productions in beryllium materials irradiated at fusion reactor or fission reactor may be calculated with high accuracy. The calculation method, user's manual, calculated examples and comparison with experimental data were described. This report also describes a neutronics simulation method to generate additional data on swelling of beryllium, 3,000-15,000 appm helium range, for end-of-life of the proposed design for fusion blanket of the ITER. The calculation results indicate that helium production for beryllium sample doped lithium by 50 days irradiation in the fission reactor, such as the JMTR, could be achieved to 2,000-8,000 appm. (author)

π0, rho0 ω0 production in high energy neutrino and antineutrino interactions

International Nuclear Information System (INIS)

Velasco, J.

1980-09-01

The work presented in this thesis is concerned with the hadronic shower in the neutrino and antineutrino interactions of the high energy charged-current type. The π 0 particles issued from this hadronic shower are analysed and the rho 0 and ω 0 production rate are determined in view to try to understand the quark fragmentation process, that is to say the QCD theory relative to the quark confinement problem. The experimental device is described in the chapter II. Chapter III is dealing with the analysis of the exposures obtained with this device, together with the incident neutrino energy determination methods and a general description of the final data characteristics. The π 0 production is studied from the decay γ observed in the bubble chamber. The existing different methods are analyzed and compared with the used one. The π 0 properties are studied in detail. In chapter 5, the rho 0 and ω 0 resonance production rate is calculated, using the previous chapter results. Finally, chapter 6 summarizes the thesis conclusions [fr

Department of Energy programs and objectives: energy conservation in agricultural production

Energy Technology Data Exchange (ETDEWEB)

1977-12-01

This document describes the current Department of Energy agriculture research program as it relates to the research recommendations submitted by a 1976 workshop on energy conservation in agricultural production. In-depth discussions on fertilizers, irrigation, crop drying, fuel substitution, crop and animal production systems, greenhouses, materials handling, and transport systems are included. (MCW)

Chapter 8: Whole-Building Retrofit with Consumption Data Analysis Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

Energy Technology Data Exchange (ETDEWEB)

Kurnik, Charles W. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Agnew, Ken [DNV GL, Madison, WI (United States); Goldberg, Mimi [DNV GL, Madison, WI (United States)

2017-11-01

Whole-building retrofits involve the installation of multiple measures. Whole-building retrofit programs take many forms. With a focus on overall building performance, these programs usually begin with an energy audit to identify cost-effective energy efficiency measures for the home. Measures are then installed, either at no cost to the homeowner or partially paid for by rebates and/or financing. The methods described here may also be applied to evaluation of single-measure retrofit programs. Related methods exist for replace-on-failure programs and for new construction, but are not the subject of this chapter.

Optimization of refinery product blending by using linear programming

International Nuclear Information System (INIS)

Ristikj, Julija; Tripcheva-Trajkovska, Loreta; Rikaloski, Ice; Markovska, Liljana

1999-01-01

The product slate of a simple refinery consists mainly of liquefied petroleum gas, leaded and unleaded gasoline, jet fuel, diesel fuel, extra light heating oil and fuel oil. The quality of the oil products (fuels) for sale has to comply with the adopted standards for liquid fuels, and the produced quantities have to be comply with the market needs. The oil products are manufactured by blending two or more different fractions which quantities and physical-chemical properties depend on the crude oil type, the way and conditions of processing, and at the same time the fractions are used to blend one or more products. It is in producer's interest to do the blending in an optimal way, namely, to satisfy the requirements for the oil products quality and quantity with a maximal usage of the available fractions and, of course, with a maximal profit out of the sold products. This could be accomplished by applying linear programming, that is by using a linear model for oil products blending optimization. (Author)

Vegetation and acidification, Chapter 5

Science.gov (United States)

David R. DeWalle; James N. Kochenderfer; Mary Beth Adams; Gary W. Miller

2006-01-01

In this chapter, the impact of watershed acidification treatments on WS3 at the Fernow Experimental Forest (FEF) and at WS9 on vegetation is presented and summarized in a comprehensive way for the first time. WS7 is used as a vegetative reference basin for WS3, while untreated plots within WS9 are used as a vegetative reference for WS9. Bioindicators of acidification...

Isotope Production and Distribution Program. Financial statements, September 30, 1994 and 1993

Energy Technology Data Exchange (ETDEWEB)

Marwick, P.

1994-11-30

The attached report presents the results of the independent certified public accountants` audit of the Isotope Production and Distribution (IP&D) Program`s financial statements as of September 30, 1994. The auditors have expressed an unqualified opinion on IP&D`s 1994 statements. Their reports on IP&D`s internal control structure and on compliance with laws,and regulations are also provided. The charter of the Isotope Program covers the production and sale of radioactive and stable isotopes, byproducts, and related isotope services. Prior to October 1, 1989, the Program was subsidized by the Department of Energy through a combination of appropriated funds and isotope sales revenue. The Fiscal Year 1990 Appropriations Act, Public Law 101-101, authorized a separate Isotope Revolving Fund account for the Program, which was to support itself solely from the proceeds of isotope sales. The initial capitalization was about $16 million plus the value of the isotope assets in inventory or on loan for research and the unexpended appropriation available at the close of FY 1989. During late FY 1994, Public Law 103--316 restructured the Program to provide for supplemental appropriations to cover costs which are impractical to incorporate into the selling price of isotopes. Additional information about the Program is provided in the notes to the financial statements.

Scholarly Productivity of School Psychology Faculty Members in Specialist-Level Programs: 2002-2011

Science.gov (United States)

Laurent, Jeff; Runia, Elizabeth

2016-01-01

The scholarly productivity of school psychology faculty members in specialist-level only programs was examined. Information was gathered from the School Psychology Program Information portion of the website for the National Association of School Psychologists. A total of 137 specialist-level only school psychology programs were identified.…

Evaluation of Enova's heating programs; Evaluering av Enovas varmeprogrammer

Energy Technology Data Exchange (ETDEWEB)

Rasmussen, Ingeborg; Grorud, Christian; Heldal, Nicolai; Trong, Maj Dang

2006-07-01

An evaluation of Enova's heating program is presented. The central point was to evaluate to which degree Enova's heating program had resulted in increased supply of renewable energy for heating purposes to the Norwegian energy system. Main results are presented in part 1, chapter 1 to 5, while the facts and analyses behind the evaluation are presented in part 2, chapter I to VII. The main conclusion is that the program seen as one has had triggering effect on the market. The program has thus provided results in the form of increased supply of heating energy. Because of the project limitations and the lack of systematically documented baselines in the procedures, there are insecurities connected to the exact data registered. This makes quantification of the results difficult (ml)

Advances in life cycle assessment and emergy evaluation with case studies in gold mining and pineapple production

Science.gov (United States)

Ingwersen, Wesley W.

Life cycle assessment (LCA) is an internationally standardized framework for assessing the environmental impacts of products that is rapidly evolving to improve understanding and quantification of how complex product systems depend upon and affect the environment. This dissertation contributes to that evolution through the development of new methods for measuring impacts, estimating the uncertainty of impacts, and measuring ranges of environmental performance, with a focus on product systems in non-OECD countries that have not been well characterized. The integration of a measure of total energy use, emergy, is demonstrated in an LCA of gold from the Yanacocha mine in Peru in the second chapter. A model for estimating the accuracy of emergy results is proposed in the following chapter. The fourth chapter presents a template for LCA-based quantification of the range of environmental performance for tropical agricultural products using the example of fresh pineapple production for export in Costa Rica that can be used to create product labels with environmental information. The final chapter synthesizes how each methodological contribution will together improve the science of measuring product environmental performance.

78 FR 17648 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

Science.gov (United States)

2013-03-22

... Conservation Program for Consumer Products: Representative Average Unit Costs of Energy'', dated April 26, 2012... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency...

Glances on uranium. Tome 2. Exploration, production

International Nuclear Information System (INIS)

Valsardieu, C.

1997-01-01

This book is an homage to all participants of uranium prospecting and mining exploitation who have contributed to satisfy the nuclear energy needs during the last 50 years. The first chapter describes the economical, administrative and environmental constraints of uranium mining projects. The second chapter describes the different steps of the exploration (permits, inventory, mineralisation, quality, resource estimation, quantifying), the direct and indirect exploratory techniques and methods (radiometry, geochemistry, drillings and well logging, mapping, tele-detection, geophysical surveys..) and the exploration costs. The third chapter deals with the legal, administrative, technical, socio-economical and financial aspects which must be taken into account in the risk evaluation of a mining project. Chapter 4 concerns the start up of the project while the development and production methods are detailed in chapter 5 (opencast and underground mining, in-situ lixiviation, ore processing, chemical extraction etc.). The last chapter is devoted to the environmental aspects of uranium mining: legal aspects, nuisances, dusts, contamination, the case of in-situ lixiviation, the rehabilitation of sites. (J.S.)

Programming in HAL/S

Science.gov (United States)

Ryer, M. J.

1979-01-01

Intended as an introduction to programming in HAL/S, this manual is organized as a tutorial aid which may be used as part of a self-study program or in conjunction with a course of twenty to forty classroom hours over a period of one to two weeks. A number of corrections to the first edition are incorporated into the text along with a chapter on FIXED data and an additional appendix on FORMAT I/0.

Isotope production and distribution Programs Fiscal Year (FY) 1995 Financial Statement Audit (ER-FC-96-01)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-02-12

The charter of the Department of Energy (DOE) Isotope Production and Distribution Program (Isotope Program) covers the production and sale of radioactive and stable isotopes, associated byproducts, surplus materials such as lithium and deuterium, and related isotope services. Services provided include, but are not limited to, irradiation services, target preparation and processing, source encapsulation and other special preparations, analyses, chemical separations, and leasing of stable isotopes for research purposes. Isotope Program products and services are sold worldwide for use in a wide variety of research, development, biomedical, and industrial applications. The Isotope Program reports to the Director of the Office of Nuclear Energy, Science and Technology. The Isotope Program operates under a revolving fund, as established by the Fiscal Year 1990 Energy and Water Appropriations Act (Public Law 101-101). The Fiscal Year 1995 Appropriations Act (Public Law 103-316) modified predecessor acts to allow prices charged for Isotope Program products and services to be based on production costs, market value, the needs of the research community, and other factors. Prices set for small-volume, high-cost isotopes that are needed for research may not achieve full-cost recovery. Isotope Program costs are financed by revenues from the sale of isotopes and associated services and through payments from the isotope support decision unit, which was established in the DOE fiscal year 1995 Energy, Supply, Research, and Development appropriation. The isotope decision unit finances the production and processing of unprofitable isotopes that are vital to the national interest.

Fundamentals of Physics, Volume 1, (Chapters 1 - 21)

Science.gov (United States)

Walker, Jearl

2004-01-01

Chapter 1. Measurement 1. How does the appearance of a new type of cloud signal changes in Earth's atmosphere? 1-1 What Is Physics? 1-2 Measuring Things. 1-3 The International System of Units. 1-4 Changing Units. 1-5 Length. 1-6 Time. 1-7 Mass. Review & Summary. Problems. Chapter 2. Motion Along a Straight Line. What causes whiplash injury in rear-end collisions of cars? 2-1 What Is Physics? 2-2 Motion. 2-3 Position and Displacement. 2-4 Average Velocity and Average Speed. 2-5 Instantaneous Velocity and Speed. 2-6 Acceleration. 2-7 Constant Acceleration: A Special Case. 2-8 Another Look at Constant Acceleration. 2-9 Free-Fall Acceleration. 2-10 Graphical Integration in Motion Analysis. 2 Review & Summary. Questions. Problems. Chapter 3. Vectors. How does an ant know the way home with no guiding clues on the desert plains? 3-1 What Is Physics? 3-2 Vectors and Scalars. 3-3 Adding Vectors Geometrically. 3-4 Components of Vectors. 3-5 Unit Vectors. 3-6 Adding Vectors by Components. 3-7 Vectors and the Laws of Physics. 3-8 Multiplying Vectors. Review & Summary. Questions. Problems. Chapter 4. Motion in Two and Three Dimensions. In a motorcycle jump for record distance, where does the jumper put the second ramp? 4-1 What Is Physics? 4-2 Position and Displacement. 4-3 Average Velocity and Instantaneous Velocity. 4-4 Average Acceleration and Instantaneous Acceleration. 4-5 Projectile Motion. 4-6 Projectile Motion Analyzed. 4-7 Uniform Circular Motion. 4-8 Relative Motion in One Dimension. 4-9 Relative Motion in Two Dimensions. Review & Summary. Questions. Problems. Chapter 5. Force and Motion--I. When a pilot takes off from an aircraft carrier, what causes the compulsion to .y the plane into the ocean? 5-1 What Is Physics? 5-2 Newtonian Mechanics. 5-3 Newton's First Law. 5-4 Force. 5-5 Mass. 5-6 Newton's Second Law. 5-7 Some Particular Forces. 5-8 Newton's Third Law. 5-9 Applying Newton's Laws. Review & Summary. Questions. Problems. Chapter 6. Force and Motion--II. Can a

Weapon System Requirements: Detailed Systems Engineering Prior to Product Development Positions Programs for Success

Science.gov (United States)

2016-11-01

modified, replaced, or sustained by consumers or different manufacturers in addition to the manufacturer that developed the system. It also allows...WEAPON SYSTEM REQUIREMENTS Detailed Systems Engineering Prior to Product Development Positions Programs for Success...Engineering Prior to Product Development Positions Programs for Success Why GAO Did This Study Cost and schedule growth in DOD major defense

Calendar Year 2007 Program Benefits for ENERGY STAR Labeled Products

Energy Technology Data Exchange (ETDEWEB)

Sanchez, Marla Christine; Homan, Gregory; Brown, Richard

2008-10-31

ENERGY STAR is a voluntary energy efficiency-labeling program operated jointly by the United States Department of Energy and the United States Environmental Protection Agency (US EPA). Since the program inception in 1992, ENERGY STAR has become a leading international brand for energy efficient products. ENERGY STAR's central role in the development of regional, national, and international energy programs necessitates an open process whereby its program achievements to date as well as projected future savings are shared with committed stakeholders. Through 2007, the program saved 7.1 Quads of primary energy and avoided 128 MtC equivalent. The forecast shows that the program is expected to save 21.2 Quads of primary energy and avoid 375 MtC equivalent over the period 2008-2015. The sensitivity analysis bounds the best estimate of carbon avoided between 84 MtC and 172 MtC (1993 to 2007) and between 243 MtC and 519 MtC (2008 to 2015).

Creating sustainability : the social construction of the market for organic products

NARCIS (Netherlands)

Miele, M.

2001-01-01

Creating Sustainability: The Social Construction of the Market for Organic Products

Chapter N. 1: Reflections on globalisation

This chapter starts with some reflection on the concept of globalisation and reviews the literature

A nonlinear bi-level programming approach for product portfolio management.

Science.gov (United States)

Ma, Shuang

2016-01-01

Product portfolio management (PPM) is a critical decision-making for companies across various industries in today's competitive environment. Traditional studies on PPM problem have been motivated toward engineering feasibilities and marketing which relatively pay less attention to other competitors' actions and the competitive relations, especially in mathematical optimization domain. The key challenge lies in that how to construct a mathematical optimization model to describe this Stackelberg game-based leader-follower PPM problem and the competitive relations between them. The primary work of this paper is the representation of a decision framework and the optimization model to leverage the PPM problem of leader and follower. A nonlinear, integer bi-level programming model is developed based on the decision framework. Furthermore, a bi-level nested genetic algorithm is put forward to solve this nonlinear bi-level programming model for leader-follower PPM problem. A case study of notebook computer product portfolio optimization is reported. Results and analyses reveal that the leader-follower bi-level optimization model is robust and can empower product portfolio optimization.

Strangeness production in Ni+Ni collisions at 1.93 AGeV; Production d'etrangete dans les collisions Ni+Ni a 1.93 AGeV

Energy Technology Data Exchange (ETDEWEB)

Lopez, X

2004-12-15

This work deals with the production of strange particles in Ni + Ni collisions at 1.93 A GeV detected with the Fopi (four pi) detector at the heavy ion synchrotron SIS (GSI - Germany). We have limited our investigation to the study of {lambda} and {xi} hyperons. The first chapter presents the models used to describe ultra-relativistic heavy ions collisions. In the second chapter we present the main experimental results concerning the production and transport of strange particles in an energy domain ranging from SIS to RHIC (relativistic heavy ion collider) energies. The third chapter is dedicated to the specificities of the Fopi detector. The fourth chapter deals with the production of {lambda} particles in Ni + Ni collisions. An analysis method based on neuron network has been used in parallel with a more classical method. The production rate and temperature of {lambda} have been deduced from both methods. The neuron network method gives a statistical gain and allows a better identification of particles with low transverse impulses. The fifth chapter is dedicated to the detection of the doubly strange {xi}{sup -} particle. A detailed study about the stability of the signal is presented. In the last chapter all our experimental results are confronted with theoretical predictions. The UrQMD model that uses a hard equation of state, can simulate satisfactorily the production rates of {lambda} and K{sup +} as well as their dependency on collision centrality despite the fact that this model does not use a potential linked to the medium density. The comparison between experimental results and predictions given by the IQMD model (that is based on a soft equation of state) is better when the version of the model that does not take into account the effects of the media is used. We see that the choices for the nuclear matter compressibility, for the particles involved in Kaon and {lambda} creation process, or for the interaction potential with dense medium, appear to be

Gasoline toxicology: overview of regulatory and product stewardship programs.

Science.gov (United States)

Swick, Derek; Jaques, Andrew; Walker, J C; Estreicher, Herb

2014-11-01

Significant efforts have been made to characterize the toxicological properties of gasoline. There have been both mandatory and voluntary toxicology testing programs to generate hazard characterization data for gasoline, the refinery process streams used to blend gasoline, and individual chemical constituents found in gasoline. The Clean Air Act (CAA) (Clean Air Act, 2012: § 7401, et seq.) is the primary tool for the U.S. Environmental Protection Agency (EPA) to regulate gasoline and this supplement presents the results of the Section 211(b) Alternative Tier 2 studies required for CAA Fuel and Fuel Additive registration. Gasoline blending streams have also been evaluated by EPA under the voluntary High Production Volume (HPV) Challenge Program through which the petroleum industry provide data on over 80 refinery streams used in gasoline. Product stewardship efforts by companies and associations such as the American Petroleum Institute (API), Conservation of Clean Air and Water Europe (CONCAWE), and the Petroleum Product Stewardship Council (PPSC) have contributed a significant amount of hazard characterization data on gasoline and related substances. The hazard of gasoline and anticipated exposure to gasoline vapor has been well characterized for risk assessment purposes. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Rainfall Product Evaluation for the TRMM Ground Validation Program

Science.gov (United States)

Amitai, E.; Wolff, D. B.; Robinson, M.; Silberstein, D. S.; Marks, D. A.; Kulie, M. S.; Fisher, B.; Einaudi, Franco (Technical Monitor)

2000-01-01

Evaluation of the Tropical Rainfall Measuring Mission (TRMM) satellite observations is conducted through a comprehensive Ground Validation (GV) Program. Standardized instantaneous and monthly rainfall products are routinely generated using quality-controlled ground based radar data from four primary GV sites. As part of the TRMM GV program, effort is being made to evaluate these GV products and to determine the uncertainties of the rainfall estimates. The evaluation effort is based on comparison to rain gauge data. The variance between the gauge measurement and the true averaged rain amount within the radar pixel is a limiting factor in the evaluation process. While monthly estimates are relatively simple to evaluate, the evaluation of the instantaneous products are much more of a challenge. Scattegrams of point comparisons between radar and rain gauges are extremely noisy for several reasons (e.g. sample volume discrepancies, timing and navigation mismatches, variability of Z(sub e)-R relationships), and therefore useless for evaluating the estimates. Several alternative methods, such as the analysis of the distribution of rain volume by rain rate as derived from gauge intensities and from reflectivities above the gauge network will be presented. Alternative procedures to increase the accuracy of the estimates and to reduce their uncertainties also will be discussed.

Products in fusion systems

DEFF Research Database (Denmark)

Henke, Ellen

2013-01-01

We revisit the notion of a product of a normal subsystem with a p-subgroup as defined by Aschbacher (2011) [Asc11, Chapter 8]. In particular, we give a previously unknown, more transparent construction....

Criterion III: Maintenance of rangeland productive capacity [Chapter 4

Science.gov (United States)

G. R. Evans; R. A. Washmgton-Allen; R. D. Child; J. E. Mitchell; B. R. Bobowskl; R. V. Loper; B. H. Allen-Diaz; D. W. Thompson; G. R. Welling; T. B. Reuwsaat

2010-01-01

Maintenance of rangeland productive capacity is one of five criteria established by the Sustainable Rangelands Roundtable (SRR) to monitor and assess rangeland sustainable management. Within this criterion, six indicators were developed through the Delphi Process and the expert opinions of academicians, rangeland scientists, rangeland management agency personnel, non-...

Programming languages for circuit design.

Science.gov (United States)

Pedersen, Michael; Yordanov, Boyan

2015-01-01

This chapter provides an overview of a programming language for Genetic Engineering of Cells (GEC). A GEC program specifies a genetic circuit at a high level of abstraction through constraints on otherwise unspecified DNA parts. The GEC compiler then selects parts which satisfy the constraints from a given parts database. GEC further provides more conventional programming language constructs for abstraction, e.g., through modularity. The GEC language and compiler is available through a Web tool which also provides functionality, e.g., for simulation of designed circuits.

An application program for fission product decay heat calculations

International Nuclear Information System (INIS)

Pham, Ngoc Son; Katakura, Jun-ichi

2007-10-01

The precise knowledge of decay heat is one of the most important factors in safety design and operation of nuclear power facilities. Furthermore, decay heat data also play an important role in design of fuel discharges, fuel storage and transport flasks, and in spent fuel management and processing. In this study, a new application program, called DHP (Decay Heat Power program), has been developed for exact decay heat summation calculations, uncertainty analysis, and for determination of the individual contribution of each fission product. The analytical methods were applied in the program without any simplification or approximation, in which all of linear and non-linear decay chains, and 12 decay modes, including ground state and meta-stable states, are automatically identified, and processed by using a decay data library and a fission yield data file, both in ENDF/B-VI format. The window interface of the program is designed with optional properties which is very easy for users to run the code. (author)

38 CFR 21.3043 - Suspension of program; child.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Suspension of program; child. 21.3043 Section 21.3043 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS... 38 U.S.C. Chapter 35 Eligibility and Entitlement § 21.3043 Suspension of program; child. For an...

Summary of the Nevada Applied Ecology Group and correlative programs

International Nuclear Information System (INIS)

Friesen, H.N.

1992-10-01

This summary document presents results in a broad context; it is not limited to findings of the Nevada Applied Ecology Group. This book is organized to present the findings of the Nevada Applied Ecology Group and correlative programs in accordance with the originally stated objectives of the Nevada Applied Ecology Group. This plan, in essence, traces plutonium from its injection into the environment to movement in the ecosystem to development of cleanup techniques. Information on other radionuclides was also obtained and will be presented briefly. Chapter 1 presents a brief description of the ecological setting of the Test Range Complex. The results of investigations for plutonium distribution are presented in Chapter 2 for the area surrounding the Test Range Complex and in Chapter 3 for on-site locations. Chapters 4 and 5 present the results of investigations concerned with concentrations and movement, respectively, of plutonium in the ecosystem of the Test Range Complex, and Chapter 6 summarizes the potential hazard from this plutonium. Development of techniques for cleanup and treatment is presented in Chapter 7, and the inventory of radionuclides other than plutonium is presented briefly in Chapter 8

Fundamentals of Physics, Part 1 (Chapters 1-11)

Science.gov (United States)

Halliday, David; Resnick, Robert; Walker, Jearl

2003-12-01

Chapter 1.Measurement. How does the appearance of a new type of cloud signal changes in Earth's atmosphere? 1-1 What Is Physics? 1-2 Measuring Things. 1-3 The International System of Units. 1-4 Changing Units. 1-5 Length. 1-6 Time. 1-7 Mass. Review & Summary. Problems. Chapter 2.Motion Along a Straight Line. What causes whiplash injury in rear-end collisions of cars? 2-1 What Is Physics? 2-2 Motion. 2-3 Position and Displacement. 2-4 Average Velocity and Average Speed. 2-5 Instantaneous Velocity and Speed. 2-6 Acceleration. 2-7 Constant Acceleration: A Special Case. 2-8 Another Look at Constant Acceleration. 2-9 Free-Fall Acceleration. 2-10 Graphical Integration in Motion Analysis. Review & Summary. Questions. Problems. Chapter 3.Vectors. How does an ant know the way home with no guiding clues on the deser t plains? 3-2 Vectors and Scalars. 3-3 Adding Vectors Geometrically. 3-4 Components of Vectors. 3-5 Unit Vectors. 3-6 Adding Vectors by Components. 3-7 Vectors and the Laws of Physics. 3-8 Multiplying Vectors. Review & Summary. Questions. Problems. Chapter 4.Motion in Two and Three Dimensions. In a motorcycle jump for record distance, where does the jumper put the second ramp? 4-1 What Is Physics? 4-2 Position and Displacement. 4-3 Average Velocity and Instantaneous Velocity. 4-4 Average Acceleration and Instantaneous Acceleration. 4-5 Projectile Motion. 4-6 Projectile Motion Analyzed. 4-7 Uniform Circular Motion. 4-8 Relative Motion in One Dimension. 4-9 Relative Motion in Two Dimensions. Review & Summary. Questions. Problems. Chapter 5.Force and Motion-I. When a pilot takes off from an aircraft carrier, what causes the compulsion to fly the plane into the ocean? 5-1 What Is Physics? 5-2 Newtonian Mechanics. 5-3 Newton's First Law. 5-4 Force. 5-5 Mass. 5-6 Newton's Second Law. 5-7 Some Particular Forces. 5-8 Newton's Third Law. 5-9 Applying Newton's Laws. Review & Summary. Questions. Problems. Chapter 6.Force and Motion-II. Can a Grand Prix race car be driven

Three-level approach to quality programs for research, development and production

International Nuclear Information System (INIS)

Davis, A.H.; Bussolini, P.L.; Geoffrion, R.R.

1986-01-01

A primary mission of the Los Alamos National Laboratory is to develop nuclear weapons systems for the Department of Defense. The activities included in this effort cover a broad spectrum, ranging from pure research to routine production. In order to provide a workable framework for a comprehensive quality assurance program for these varied activities, we have proposed a three-level structure of quality plans, corresponding to a rough classification of the weapons work into three general categories. These categories are: (1) research into materials and processes, and preliminary development; (2) design, development, and fabrication of prototype components; (3) routine production, analysis, or refinement activities. The first category requires a quality program to assure the validity, reliability, and retrievability of the information developed; this is accomplished by a conscientious application of what is generally recognized as good laboratory practice. The second category requires in addition a strong emphasis on design review and inspection. For the third category, a comprehensive quality program is appropriate

As-Built design specification for the CLASFYT program. [production of classification files - crop inventory

Science.gov (United States)

Horton, C. L. (Principal Investigator)

1981-01-01

The CLASFYT program is described in detail. The program produces a one-channel universal-formatted classification file. Trajectory coefficients and a composite set of tolerance values are calculated from five acquisitions of radiance values in each of the training fields corresponding to up to ten agricultural products. These coefficients and tolerance values are used to classify each pixel in the test field of the same segment to be the same agricultural product as one of the training fields, none of the products or a screened pixel.

Camp Wanna-Read: Program Guide for the Texas Reading Club 1991.

Science.gov (United States)

Switzer, Robin Works

Camp Wanna-Read is the theme for the 1991 program for the Texas Reading Club, which centers around the experiences and types of things that happen at summer camp. Each chapter is a type of camp a child might attend such as cooking camp, art camp, music camp, science camp, Indian camp, nature camp, and regular summer camp. The chapters are divided…

Erlang Programming A Concurrent Approach to Software Development

CERN Document Server

Cesarini, Francesco

2009-01-01

This book offers you an in-depth explanation of Erlang, a programming language ideal for any situation where concurrency, fault-tolerance, and fast response is essential. You'll learn how to write complex concurrent programs in this language, regardless of your programming background or experience. Erlang Programming focuses on the language's syntax and semantics, and explains pattern matching, proper lists, recursion, debugging, networking, and concurrency, with exercises at the end of each chapter.

Chapter 8: Design and Control of Voltage Source Converters With LCL-Filters

DEFF Research Database (Denmark)

Pena-Alzola, Rafael; Blaabjerg, Frede

2018-01-01

presents many options for the LCL-filter design, passive damping design, and active damping design, and this chapter will present well-known practical methods. In this chapter, the LCL-filter design uses a step-by-step procedure with simple formulas that avoid trial-and-error iterations. Different......-type procedures result in a robust design against line inductance variations. The capacitor-current feedback method requires an additional sensor and the lead-lag network avoid additional sensors by using the capacitor voltage also for synchronization. The filter-based procedure presented in the chapter uses...

24 CFR 3282.360 - PIA acceptance of product certification programs or listings.

Science.gov (United States)

2010-04-01

... ENFORCEMENT REGULATIONS Primary Inspection Agencies § 3282.360 PIA acceptance of product certification... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false PIA acceptance of product certification programs or listings. 3282.360 Section 3282.360 Housing and Urban Development Regulations Relating...

Surface water quality in streams and rivers: introduction, scaling, and climate change: Chapter 5

Science.gov (United States)

Loperfido, John

2013-01-01

A variety of competing and complementary needs such as ecological health, human consumption, transportation, recreation, and economic value make management and protection of water resources in riverine environments essential. Thus, an understanding of the complex and interacting factors that dictate riverine water quality is essential in empowering stake-holders to make informed management decisions (see Chapter 1.15 for additional information on water resource management). Driven by natural and anthropogenic forcing factors, a variety of chemical, physical, and biological processes dictate riverine water quality, resulting in temporal and spatial patterns and cycling (see Chapter 1.2 for information describing how global change interacts with water resources). Furthermore, changes in climatic forcing factors may lead to long-term deviations in water quality outside the envelope of historical data. The goal of this chapter is to present fundamental concepts dictating the conditions of basic water quality parameters in rivers and streams (herein generally referred to as rivers unless discussing a specific system) in the context of temporal (diel (24 h) to decadal) longitudinal scaling. Understanding water quality scaling in rivers is imperative as water is continually reused and recycled (see also Chapters 3.1 and 3.15); upstream discharges from anthropogenic sources are incorporated into bulk riverine water quality that is used by downstream consumers. Water quality parameters reviewed here include temperature, pH, dissolved oxygen (DO), and suspended sediment and were selected given the abundance of data available for these parameters due to recent advances in water quality sensor technology (see Chapter 4.13 for use of hydrologic data in watershed management). General equations describing reactions affecting water temperature, pH, DO, and suspended sediment are included to convey the complexity of how simultaneously occurring reactions can affect water quality

Joint pricing and production management: a geometric programming approach with consideration of cubic production cost function

Science.gov (United States)

Sadjadi, Seyed Jafar; Hamidi Hesarsorkh, Aghil; Mohammadi, Mehdi; Bonyadi Naeini, Ali

2015-06-01

Coordination and harmony between different departments of a company can be an important factor in achieving competitive advantage if the company corrects alignment between strategies of different departments. This paper presents an integrated decision model based on recent advances of geometric programming technique. The demand of a product considers as a power function of factors such as product's price, marketing expenditures, and consumer service expenditures. Furthermore, production cost considers as a cubic power function of outputs. The model will be solved by recent advances in convex optimization tools. Finally, the solution procedure is illustrated by numerical example.

CHAPTER 7. BERYLLIUM ANALYSIS BY NON-PLASMA BASED METHODS

Energy Technology Data Exchange (ETDEWEB)

Ekechukwu, A

2009-04-20

The most common method of analysis for beryllium is inductively coupled plasma atomic emission spectrometry (ICP-AES). This method, along with inductively coupled plasma mass spectrometry (ICP-MS), is discussed in Chapter 6. However, other methods exist and have been used for different applications. These methods include spectroscopic, chromatographic, colorimetric, and electrochemical. This chapter provides an overview of beryllium analysis methods other than plasma spectrometry (inductively coupled plasma atomic emission spectrometry or mass spectrometry). The basic methods, detection limits and interferences are described. Specific applications from the literature are also presented.

Constraint-based scheduling applying constraint programming to scheduling problems

CERN Document Server

Baptiste, Philippe; Nuijten, Wim

2001-01-01

Constraint Programming is a problem-solving paradigm that establishes a clear distinction between two pivotal aspects of a problem: (1) a precise definition of the constraints that define the problem to be solved and (2) the algorithms and heuristics enabling the selection of decisions to solve the problem. It is because of these capabilities that Constraint Programming is increasingly being employed as a problem-solving tool to solve scheduling problems. Hence the development of Constraint-Based Scheduling as a field of study. The aim of this book is to provide an overview of the most widely used Constraint-Based Scheduling techniques. Following the principles of Constraint Programming, the book consists of three distinct parts: The first chapter introduces the basic principles of Constraint Programming and provides a model of the constraints that are the most often encountered in scheduling problems. Chapters 2, 3, 4, and 5 are focused on the propagation of resource constraints, which usually are responsibl...

An Application of Technological Maturity Assessment to ROKAF T-50 Aircraft Production Program

National Research Council Canada - National Science Library

Maeng, Honjae

2005-01-01

.... Finally the US GAO methodology assesses the production readiness of a program by examining the status of Statistical Process Quality Control (SPQC) procedures. This thesis also presents to the ROKAF decision maker an independent knowledge-based estimation of the ROKAF T-50 program by applying the US GAO methodology to the T-50 program.

Computations of concentration of radon and its decay products against time. Computer program; Obliczanie koncentracji radonu i jego produktow rozpadu w funkcji czasu. Program komputerowy

Energy Technology Data Exchange (ETDEWEB)

Machaj, B. [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

1996-12-31

This research is aimed to develop a device for continuous monitoring of radon in the air, by measuring alpha activity of radon and its short lived decay products. The influence of alpha activity variation of radon and its daughters on the measured results is of importance and requires a knowledge of this variation with time. Employing the measurement of alpha radiation of radon and of its short lived decay products, require knowledge of radon concentration variation and its decay products against the time. A computer program in Turbo Pascal language was therefore developed performing the computations employing the known relations involved, the program being adapted for IBM PC computers. The presented program enables computation of activity of {sup 222}Rn and its daughter products: {sup 218}Po, {sup 214}Pb, {sup 214}Bi and {sup 214}Po every 1 min within the period of 0-255 min for any state of radiation equilibrium between the radon and its daughter products. The program permits also to compute alpha activity of {sup 222}Rn + {sup 218}Po + {sup 214}Po against time and the total alpha activity at selected interval of time. The results of computations are stored on the computer hard disk in ASCII format and are used a graphic program e.g. by DrawPerfect program to make diagrams. Equations employed for computation of the alpha activity of radon and its decay products as well as the description of program functions are given. (author). 2 refs, 4 figs.

Chapter 13, Policy options: North America

Science.gov (United States)

Jane Barr; James Dobrowolski; John Campbell; Philippe Le Prestre; Lori Lynch; Marc Sydnor; Robert Adler; Jose Etcheverry; Alexander Kenny; Catherine Hallmich; Jim Lazar; Russell M. Meyer; Robin Newmark; Janet Peace; Julie A. Suhr Pierce; Stephen. Yamasaki

2012-01-01

As previously indicated, GEO-5 shifts the GEO focus from identifying environmental problems to identifying solutions that governments can then prioritize. This chapter provides examples of a number of policy options and market mechanisms that have shown some success in improving environmental conditions in North America. They are organized by priority environmental...

Science, practice, and place [Chapter 2

Science.gov (United States)

Daniel R. Williams

2013-01-01

Place-oriented inquiry and practice are proposed as keys to overcoming the persistent gap between science and practice. This chapter begins by describing some of the reasons science fails to simplify conservation practice, highlighting the challenges associated with the social and ecological sciences of multi-scaled complexity. Place concepts help scientists and...

75 FR 57555 - Energy Conservation Program for Consumer Products: Test Procedure for Residential Clothes Washers

Science.gov (United States)

2010-09-21

... technologies not covered by the current procedure; (2) more accurately reflect current consumer behavior and... Part II Department of Energy 10 CFR Part 430 Energy Conservation Program for Consumer Products... [Docket No. EERE-2010-BT-TP-0021] RIN 1904-AC08 Energy Conservation Program for Consumer Products: Test...

75 FR 57556 - Energy Conservation Program for Consumer Products: Test Procedure for Residential Clothes Washers

Science.gov (United States)

2010-09-21

... technologies not covered by the current procedure; (2) more accurately reflect current consumer behavior and... Part II Department of Energy 10 CFR Part 430 Energy Conservation Program for Consumer Products... [Docket No. EERE-2010-BT-TP-0021] RIN 1904-AC08 Energy Conservation Program for Consumer Products: Test...

THE ROLE OF INTERNATIONAL EXCHANGE PROGRAMS IN DESIGN EDUCATION: A CASE STUDY OF AN ARCHITECTURAL DESIGN COURSE IN JAPAN

Directory of Open Access Journals (Sweden)

Murat Dundar

2010-07-01

Full Text Available The purpose of this paper is to discuss role of international exchange programs in design education based on experiences and outputs of the summer school course ICSA (Inter-Cultural Study of Architecture held in Japan with the participation of Japanese and Turkish students for 50 days under the collaboration of Mukogawa Women’s University (MWU, Japan and Bahcesehir University (BSU, Turkey. After the introduction, chapter One will compare educational methods used in architectural design courses. Chapter Two will mainly provide general observations of ICSA in Japan summer school course. In chapter Three, contributions of international exchange programs to design education will be discussed in terms of two different approaches. Finally, chapter Four will outline the main arguments discussed in this paper.

Continuing Chapter 1's Leadership in Modeling Best Practices in Evaluation. A Symposium Presentation.

Science.gov (United States)

Ligon, Glynn

This paper examines whether the Title I/Chapter 1 tradition of leading the way in educational evaluation will continue or whether Chapter 1 will change its role by delegating decision-making authority over evaluation methodology to state and local school systems. Whatever direction Chapter 1 takes, states, school systems, and schools must be held…

Integer programming

CERN Document Server

Conforti, Michele; Zambelli, Giacomo

2014-01-01

This book is an elegant and rigorous presentation of integer programming, exposing the subject’s mathematical depth and broad applicability. Special attention is given to the theory behind the algorithms used in state-of-the-art solvers. An abundance of concrete examples and exercises of both theoretical and real-world interest explore the wide range of applications and ramifications of the theory. Each chapter is accompanied by an expertly informed guide to the literature and special topics, rounding out the reader’s understanding and serving as a gateway to deeper study. Key topics include: formulations polyhedral theory cutting planes decomposition enumeration semidefinite relaxations Written by renowned experts in integer programming and combinatorial optimization, Integer Programming is destined to become an essential text in the field.

Simulating quantum systems on classical computers with matrix product states

International Nuclear Information System (INIS)

Kleine, Adrian

2010-01-01

In this thesis, the numerical simulation of strongly-interacting many-body quantum-mechanical systems using matrix product states (MPS) is considered. Matrix-Product-States are a novel representation of arbitrary quantum many-body states. Using quantum information theory, it is possible to show that Matrix-Product-States provide a polynomial-sized representation of one-dimensional quantum systems, thus allowing an efficient simulation of one-dimensional quantum system on classical computers. Matrix-Product-States form the conceptual framework of the density-matrix renormalization group (DMRG). After a general introduction in the first chapter of this thesis, the second chapter deals with Matrix-Product-States, focusing on the development of fast and stable algorithms. To obtain algorithms to efficiently calculate ground states, the density-matrix renormalization group is reformulated using the Matrix-Product-States framework. Further, time-dependent problems are considered. Two different algorithms are presented, one based on a Trotter decomposition of the time-evolution operator, the other one on Krylov subspaces. Finally, the evaluation of dynamical spectral functions is discussed, and a correction vector-based method is presented. In the following chapters, the methods presented in the second chapter, are applied to a number of different physical problems. The third chapter deals with the existence of chiral phases in isotropic one-dimensional quantum spin systems. A preceding analytical study based on a mean-field approach indicated the possible existence of those phases in an isotropic Heisenberg model with a frustrating zig-zag interaction and a magnetic field. In this thesis, the existence of the chiral phases is shown numerically by using Matrix-Product-States-based algorithms. In the fourth chapter, we propose an experiment using ultracold atomic gases in optical lattices, which allows a well controlled observation of the spin-charge separation (of

Simulating quantum systems on classical computers with matrix product states

Energy Technology Data Exchange (ETDEWEB)

Kleine, Adrian

2010-11-08

In this thesis, the numerical simulation of strongly-interacting many-body quantum-mechanical systems using matrix product states (MPS) is considered. Matrix-Product-States are a novel representation of arbitrary quantum many-body states. Using quantum information theory, it is possible to show that Matrix-Product-States provide a polynomial-sized representation of one-dimensional quantum systems, thus allowing an efficient simulation of one-dimensional quantum system on classical computers. Matrix-Product-States form the conceptual framework of the density-matrix renormalization group (DMRG). After a general introduction in the first chapter of this thesis, the second chapter deals with Matrix-Product-States, focusing on the development of fast and stable algorithms. To obtain algorithms to efficiently calculate ground states, the density-matrix renormalization group is reformulated using the Matrix-Product-States framework. Further, time-dependent problems are considered. Two different algorithms are presented, one based on a Trotter decomposition of the time-evolution operator, the other one on Krylov subspaces. Finally, the evaluation of dynamical spectral functions is discussed, and a correction vector-based method is presented. In the following chapters, the methods presented in the second chapter, are applied to a number of different physical problems. The third chapter deals with the existence of chiral phases in isotropic one-dimensional quantum spin systems. A preceding analytical study based on a mean-field approach indicated the possible existence of those phases in an isotropic Heisenberg model with a frustrating zig-zag interaction and a magnetic field. In this thesis, the existence of the chiral phases is shown numerically by using Matrix-Product-States-based algorithms. In the fourth chapter, we propose an experiment using ultracold atomic gases in optical lattices, which allows a well controlled observation of the spin-charge separation (of

Search for electroweak production of the top quark in the D diameter experiment; Recherche de la production electrofaible de quark top dans l'experience D diametre

Energy Technology Data Exchange (ETDEWEB)

Agelou, M

2005-05-01

This thesis deals with the search for a signal of the electroweak production of the top quark. This signal is made up of a high energy muon issued from the decay of a W, itself produced by a top quark. As the neutrino escapes from the detection system, some transverse energy is expected to be missing and at least 2 jets must be released with at least one jet of B. In the first chapter the author presents the standard model and reviews what physics can be made with an accelerator like the Tevatron. The second chapter presents the quest for the top quark and its discovery at the Tevatron in 1995. The third chapter is dedicated to the phenomenology of the electroweak production of the top. The chapter four presents the Tevatron and the different detectors involved in the D0 experiment. The chapter five is dedicated to the tools necessary to perform data analysis, it means to assess the corrections to apply to muon momentum, to simulated background events and to algorithms of B jet identification. The last chapter is dedicated to the search analysis of the top electroweak production in the muonic channel. 2 analysis are described: one using 158 pb{sup -1} of data and that is based on the presence of one muon in a jet to identify a B jet and the other one operating on 230 pb{sup -1} of data and that is based on a more efficient algorithm of B jet identification. This work allows us to propose a maximum value of 22.8 pb for the electroweak production cross-section of the top quark when s and t channels are combined. (A.C.)

A School with Solutions: Implementing a Solution-Focused/Adlerian-Based Comprehensive School Counseling Program.

Science.gov (United States)

LaFountain, Rebecca M.; Garner, Nadine E.

This book explains how counselors can integrate the theories of solution focused and Adlerian counseling into a comprehensive developmental counseling curriculum. Following an introduction in Chapter 1, Chapter 2 explains how support needs to be developed among the staff to implement a comprehensive school program. The comprehensive developmental…

75 FR 56795 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

Science.gov (United States)

2010-09-16

...: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment... product, additional provisions for imports, voluntary industry certification programs (VICP), verification... DOE intends to apply certification, compliance, and enforcement regulations to all covered products...

Strangeness production in Ni+Ni collisions at 1.93 AGeV

International Nuclear Information System (INIS)

Lopez, X.

2004-12-01

This work deals with the production of strange particles in Ni + Ni collisions at 1.93 A GeV detected with the Fopi (four pi) detector at the heavy ion synchrotron SIS (GSI - Germany). We have limited our investigation to the study of Λ and Ξ hyperons. The first chapter presents the models used to describe ultra-relativistic heavy ions collisions. In the second chapter we present the main experimental results concerning the production and transport of strange particles in an energy domain ranging from SIS to RHIC (relativistic heavy ion collider) energies. The third chapter is dedicated to the specificities of the Fopi detector. The fourth chapter deals with the production of Λ particles in Ni + Ni collisions. An analysis method based on neuron network has been used in parallel with a more classical method. The production rate and temperature of Λ have been deduced from both methods. The neuron network method gives a statistical gain and allows a better identification of particles with low transverse impulses. The fifth chapter is dedicated to the detection of the doubly strange Ξ - particle. A detailed study about the stability of the signal is presented. In the last chapter all our experimental results are confronted with theoretical predictions. The UrQMD model that uses a hard equation of state, can simulate satisfactorily the production rates of Λ and K + as well as their dependency on collision centrality despite the fact that this model does not use a potential linked to the medium density. The comparison between experimental results and predictions given by the IQMD model (that is based on a soft equation of state) is better when the version of the model that does not take into account the effects of the media is used. We see that the choices for the nuclear matter compressibility, for the particles involved in Kaon and Λ creation process, or for the interaction potential with dense medium, appear to be degrees of freedom that are difficult to adjust

78 FR 35642 - Certain TV Programs, Literary Works for TV Production and Episode Guides Pertaining to Same...

Science.gov (United States)

2013-06-13

... INTERNATIONAL TRADE COMMISSION [Docket No 2959] Certain TV Programs, Literary Works for TV... Certain TV Programs, Literary Works for TV Production and Episode Guides Pertaining to Same, DN 2959; the... importation of certain TV programs, literary works for TV production and episode guides pertaining to same...

Chapter 15. Attachments

International Nuclear Information System (INIS)

2001-01-01

In this chapter used abbreviations and radiation safety of NPPs in Slovak Republic are presented. Results of monitoring of NPP Bohunice V-1 and V-2 as well as NPP Mochovce are presented. A brief account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic in 2000 is presented. The collective dose is one of the fundamental indicators to assess the level of nuclear safety and safety culture. This is the total dose of both external and internal exposure of the whole of the body measured with a personal dosimeter and a calculated internal exposure over a certain period of time. Measured doses to the utility personnel, the staff of supplier organisations and official working visits are included

Evidence for WZ Production and a Measurement of the WZ Production Cross Section

Energy Technology Data Exchange (ETDEWEB)

Degenhardt, James D. [Univ. of Michigan, Ann Arbor, MI (United States)

2007-05-01

This dissertation describes a test of the Standard Model (SM) of particle physics by measuring the probability, or cross section, of simultaneously producing a W boson and a Z boson from proton-antiproton collisions. The SM predicts the cross section of WZ production to be 3.68 ± 0.25 pb. The SM and physics of WZ production are described in Chapter 2 of this dissertation. The 1.96 TeV center-of-mass energy proton-antiproton collisions are provided by the Fermi National Accelerator Laboratory (FNAL) Tevatron Collider. The W and Z particles are detected using the D0 detector, which is described in Chapter 3. The data were collected by the detector during 2002-2006 corresponding to 1 fb^-1 of p{bar p} collisions. This data set is described in Chapter 6. The measurement uses the trilepton (evee, μvee, evμμ, and μvμμ) decay channels, in which a W decays to a charged lepton plus a neutrino and a Z decays to a pair of charged leptons. The W and Z particle selection criteria, detection efficiency, and background determination are described in Chapter 7. We observe 13 candidate events in 1 fb^-1 of p$\\bar{p}$ collisions. In this data set we expect to see 4.5 ± 0.6 background events, and we expect to see 9.2 ± 1.0 signal events. The probability of 4.5 ± 0.6 background events to fluctuate to 13 or more events is 1.2 x 10^-3 which is a 3.0 σ deviation from the background estimate. A log likelihood method is used to determine the most likely cross section as determined by the measured signal efficiencies, the expected backgrounds, and the observed data. Presented in Chapter 8 is a measurement of the cross section for p$\\bar{p}$ → WZ + X at √s = 1.96 TeV. The WZ diboson production cross section is measured to be σ_WZ = 2.7$+1.7\\atop{-1.3}$ pb. This is in agreement with the predicted Standard Model cross section.

Self-reliance through FP program.

Science.gov (United States)

1988-03-01

The Yogyakarta Chapter of the Indonesian Planned Parenthood Association (IPPA), having been successful in bringing about a realization by the local community of the importance of family planning, has broadened its activities in an effort to further promote family welfare. Since 1980, the organization has begun a number of projects designed to increase the income of its client population. Given the fact that family planning acceptors of IPPA's Yogyakarta Chapter range from government officials' wives to farmers and school dropouts, its family income increase projects have been varied. Skills in such areas as bee breeding and hairdressing have been taught, and credit cooperatives have been established. These projects have been integrated with the group's family planning activities and have been paid for entirely with local funds. An integrated family planning/income increase project currently being operated by the Yogyakarta Chapter of IPPA is known as KBP2K. Along with the attempt to increase family income, the project aims to expand the acceptance of family planning and to retain existing acceptors in the family planning program. As of the 3rd quarter of 1987, 235 people had participated in the project and 59 new acceptors had been acquired. Family planning education was provided and classes were taught in various handicraft industries. Studies have revealed that the income levels of program participants significantly increased.

Non-timber forest products of the North-West District of Guyana

NARCIS (Netherlands)

Andel, T.R. van

2000-01-01

This thesis describes the use of non-timber forest products (NTFPs) by indigenous peoples of northwest Guyana. Part I contains a general analysis of NTFP harvesting in northwest Guyana Part II is an illustrated field guide of the useful plants encountered. Chapter 1: introduction Chapter

Consumer oriented new product development

DEFF Research Database (Denmark)

van Trijp, Hans C.M.; Grunert, Klaus G

2014-01-01

New product development is a necessary activity for a company’s competitiveness, profitability and growth. However, new product development is a risky activity as a large percentage of new product introductions fail to achieve their commercial targets. The present chapter reviews the existing evi...... evidence on new product success and failure factors. From that it introduces the perspective of consumer-oriented new product development as a way to balance new technological opportunity against identified consumer needs and desires....

CHAPTER FOUR LİBERTY AND TURKISH CONSTITUTIONS:

OpenAIRE

FENDOĞLU, Doç.Dr.Hasan Tahsin

2002-01-01

CHAPTER FOUR LIBERTY AND TURKISH CONSTITUTIONS: Doç.Dr.Hasan Tahsin FENDOĞLU ABSTRACT: Turkish Constitution of 1982 is the first and only Turkish Constitution that has a main purpose on strengthening the political power not the liberty or democr...

Environmental and economic suitability of forest biomass-based bioenergy production in the Southern United States

Science.gov (United States)

Dwivedi, Puneet

This study attempts to ascertain the environmental and economic suitability of utilizing forest biomass for cellulosic ethanol production in the Southern United States. The study is divided into six chapters. The first chapter details the background and defines the relevance of the study along with objectives. The second chapter reviews the existing literature to ascertain the present status of various existing conversion technologies. The third chapter assesses the net energy ratio and global warming impact of ethanol produced from slash pine (Pinus elliottii Engelm.) biomass. A life-cycle assessment was applied to achieve the task. The fourth chapter assesses the role of emerging bioenergy and voluntary carbon markets on the profitability of non-industrial private forest (NIPF) landowners by combining the Faustmann and Hartmann models. The fifth chapter assesses perceptions of four stakeholder groups (Non-Government Organization, Academics, Industries, and Government) on the use of forest biomass for bioenergy production in the Southern United States using the SWOT-AHP (Strength, Weakness, Opportunity, and Threat-Analytical Hierarchy Process) technique. Finally, overall conclusions are made in the sixth chapter. Results indicate that currently the production of cellulosic ethanol is limited as the production cost of cellulosic ethanol is higher than the production cost of ethanol derived from corn. However, it is expected that the production cost of cellulosic ethanol will come down in the future from its current level due to ongoing research efforts. The total global warming impact of E85 fuel (production and consumption) was found as 10.44 tons where as global warming impact of an equivalent amount of gasoline (production and consumption) was 21.45 tons. This suggests that the production and use of ethanol derived from slash pine biomass in the form of E85 fuel in an automobile saves about 51% of carbon emissions when compared to gasoline. The net energy ratio

Aligning Needs, Expectations, and Learning Outcomes to Sustain Self-Efficacy through Transfer Learning Community Programs

Science.gov (United States)

Leptien, Jennifer R.

2015-01-01

This chapter addresses strengths and difficulties encountered in implementing transfer learning community models and how efficacy is supported through transfer learning community programming. Transfer programming best practices and recommendations for program improvements are presented.

Thermonuclear fusion: from fundamental research to energy production? Science and technology report No. 26

International Nuclear Information System (INIS)

Laval, Guy; Blanzat, Bernard; Aspect, Alain; Aymar, Robert; Bielak, Bogdan; Decroisette, Michel; Martin, Georges; Andre, Michel; Schirmann, Daniel; Garbet, Xavier; Jacquinot, Jean; Laviron, Clement; Migus, Arnold; Moreau, Rene; Pironneau, Olivier; Quere, Yves; Vallee, Alain; Dercourt, Jean; Bayer, Charles; Juraszek, Denis; Deutsch, Claude; Le Garrec, Bruno; Hennequin, Pascale; Peysson, Yves; Rax, Jean-Marcel; Pesme, Denis; Bauche, Jacques; Monier-Garbet, Pascale; Stamm, Roland; Zerah, Gilles; Ghendrih, Philippe; Layet, Roland; Grosman, Andre; Alamo, Ana; Giancarli, Luciano; Poitevin, Yves; Rigal, Emmanuel; Chieze, Jean-Pierre

2007-01-01

This work has been commissioned by the French ministry of Education, Sciences and Research, its aim is to provide a reliable account of the state of development of thermonuclear fusion. This report makes a point on the scientific knowledge accumulated on the topic and highlights the research programs that are necessary to overcome the technological difficulties and draws the necessary steps before an industrial application to electricity production. This report is divided into 10 chapters: 1) tokamak technology and ITER, 2) inertial fusion, 3) magnetized hot plasmas, 4) laser-plasma interaction and peta-watt lasers, 5) atomic physics and fusion, 6) computer simulation, 7) plasma-wall interaction, 8) materials for fusion reactors, 9) safety analysis, and 10) inertial fusion and astrophysics. This report has been written by a large panel of experts gathered by the French Academy of Sciences. The comments on the issue by the 3 French organizations: Cea, Cnrs and SFP (French Society of Physics) follow the last chapter

Fundamentals of Physics, Part 2 (Chapters 12-20)

Science.gov (United States)

Halliday, David; Resnick, Robert; Walker, Jearl

2003-12-01

Chapter 12 Equilibrium and Elasticity. What injury can occur to a rock climber hanging by a crimp hold? 12-1 What Is Physics? 12-2 Equilibrium. 12-3 The Requirements of Equilibrium. 12-4 The Center of Gravity. 12-5 Some Examples of Static Equilibrium. 12-6 Indeterminate Structures. 12-7 Elasticity. Review & Summary Questions Problems. Chapter 13 Gravitation. What lies at the center of our Milky Way galaxy? 13-1 What Is Physics? 13-2 Newton's Law of Gravitation. 13-3 Gravitation and the Principle of Superposition. 13-4 Gravitation Near Earth's Surface. 13-5 Gravitation Inside Earth. 13-6 Gravitational Potential Energy. 13-7 Planets and Satellites: Kepler's Laws. 13-8 Satellites: Orbits and Energy. 13-9 Einstein and Gravitation. Review & Summary Questions Problems. Chapter 14 Fluids. What causes ground effect in race car driving? 14-1 What Is Physics? 14-2 What Is a Fluid? 14-3 Density and Pressure. 14-4 Fluids at Rest. 14-5 Measuring Pressure. 14-6 Pascal's Principle. 14-7 Archimedes' Principle. 14-8 Ideal Fluids in Motion. 14-9 The Equation of Continuity. 14-10 Bernoulli's Equation. Review & SummaryQuestionsProblems. Chapter 15 Oscillations. What is the "secret" of a skilled diver's high catapult in springboard diving? 15-1 What Is Physics? 15-2 Simple Harmonic Motion. 15-3 The Force Law for Simple Harmonic Motion. 15-4 Energy in Simple Harmonic Motion. 15-5 An Angular Simple Harmonic Oscillator. 15-6 Pendulums. 15-7 Simple Harmonic Motion and Uniform Circular Motion. 15-8 Damped Simple Harmonic Motion. 15-9 Forced Oscillations and Resonance. Review & Summary Questions Problems. Chapter 16 Waves--I. How can a submarine wreck be located by distant seismic stations? 16-1 What Is Physics? 16-2 Types of Waves. 16-3 Transverse and Longitudinal Waves. 16-4 Wavelength and Frequency. 16-5 The Speed of a Traveling Wave. 16-6 Wave Speed on a Stretched String. 16-7 Energy and Power of a Wave Traveling Along a String. 16-8 The Wave Equation. 16-9 The Principle of Superposition

Search for Single Top Quark Production in $p\\bar{p}$ Collisions $\\sqrt{s}$ = 1.8-TeV

Energy Technology Data Exchange (ETDEWEB)

Wolinski, Sarah Kristina [Univ. of Michigan, Ann Arbor, MI (United States)

2002-01-01

We present the results of a search for single-top-quark production in 106 $pb^{-l}$ of data from $p\\bar{p}$ collisions at $\\sqrt{s}$ = 1.8 TeV collected with the Collider Detector at Fermilab (CDF) during the 1992-1995 Run 1 of the Tevatron. This paper is organized as follows. After a review of the Standard Model of elementary particles and interactions in Chapter 2.we explain in Chapter 3. why single-top-quark production is especially well-suited to studying the top quark's properties, both within and beyond the Standard Model. In Chapter 4. we describe the experimental apparatus. Chapter 5. describes the selection criteria by which we identify single-top (signal) events in the data and Chapter 6. discusses the types of nonsingle- top {background) processes that also satisfy these criteria. Chapter 6. concludes with an estimate of the numbers of signal and background events expected to remain in the data sample after the selection criteria have been applied. These predictions indicate that the CDF Run 1 data sample has insufficient statistical sensitivity to permit observation of Standard-Model single-top production.

Chapter 6: Accidents; Capitulo 6: Acidentes

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-06-01

The chapter 6 talks about the accidents with radiators all over the world, specifically, the Stimos, in Italy, 1975, San Salvador, in El Salvador, 1989, Soreq, in Israel, 1990, Nesvizh, in Byelorussian, 1991, in Illinois, US, 1965, in Maryland, US, 1991, Hanoi, Vietnam, 1992, Fleurus, in Belgium, 2006. Comments on the accidents and mainly the learned lessons.

Program Costs and Student Completion

Science.gov (United States)

Manning, Terri M.; Crosta, Peter M.

2014-01-01

Community colleges are under pressure to increase completion rates, prepare students for the workplace, and contain costs. Colleges need to know the financial implications of what are often perceived as routine decisions: course scheduling, program offerings, and the provision of support services. This chapter presents a methodology for estimating…

2010 Annual Progress Report: DOE Hydrogen Program

Energy Technology Data Exchange (ETDEWEB)

2011-02-01

In the past year, the DOE Hydrogen Program (the Program) made substantial progress toward its goals and objectives. The Program has conducted comprehensive and focused efforts to enable the widespread commercialization of hydrogen and fuel cell technologies in diverse sectors of the economy. With emphasis on applications that will effectively strengthen our nation's energy security and improve our stewardship of the environment, the Program engages in research, development, and demonstration of critical improvements in the technologies. Highlights of the Program's accomplishments can be found in the sub-program chapters of this report.

Quality and Safety Aspects of Cereals (Wheat) and Their Products.

Science.gov (United States)

Varzakas, Theo

2016-11-17

Cereals and, most specifically, wheat are described in this chapter highlighting on their safety and quality aspects. Moreover, wheat quality aspects are adequately addressed since they are used to characterize dough properties and baking quality. Determination of dough properties is also mentioned and pasta quality is also described in this chapter. Chemometrics-multivariate analysis is one of the analyses carried out. Regarding production weighing/mixing of flours, kneading, extruded wheat flours, and sodium chloride are important processing steps/raw materials used in the manufacturing of pastry products. Staling of cereal-based products is also taken into account. Finally, safety aspects of cereal-based products are well documented with special emphasis on mycotoxins, acrylamide, and near infrared methodology.

76 FR 38287 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

Science.gov (United States)

2011-06-30

... Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial... products will be required to submit certification reports no later than December 31, 2012. DATES: This rule... some certification requirements for these products but make those requirements [[Page 38289

Fermentative Alcohol Production

DEFF Research Database (Denmark)

Martín, Mariano; Sánchez, Antonio; Woodley, John M.

2018-01-01

In this chapter we present some of key principles of bioreactor design for the production of alcohols by fermentation of sugar and syngas . Due to the different feedstocks, a detailed analysis of the hydrodynamics inside the units , bubble columns or stirred tank reactors , the gas-liquid mass...

STEM Pilot Project Grant Program: Report to the Legislature, June 2016

Science.gov (United States)

Noahr, Lorrell; Black, Scott; Rogers, Justin

2016-01-01

The Washington State Legislature established the Science, Technology, Engineering, & Math (STEM) Pilot Program in the 2015-2017 capital budget (Chapter 3, Laws of 2015, 3rd Sp. Session, Section 5026) and provided $12,500,000 for this pilot grant program. Grants awarded under this program constitute the districts' local funding for purposes of…

Collective Intelligence. Chapter 17