WorldWideScience

Sample records for program pcb method

  1. Economical weight loss program for PCB-contaminated ballasts

    International Nuclear Information System (INIS)

    Day, B.

    1995-01-01

    A PCB (Polychlorinated Biphenyls) reduction process for PCB-contaminated ballasts was described. The process was developed by such organizations and programs as PCB Containment Technology Inc, and the Contech Ballast Reduction Program, and was claimed to include waste reduction of lighting ballasts down to their smallest PCB contaminated components. Particular attention was paid to the two most contaminated main components, i.e. the capacitor and the tar potting material. Development of the process and the government's role and participation therein was explained. The process of ballast reduction was said to utilize the old 'Reduce, Reuse and Recycle' theory; it was considered to be a cost effective waste reduction, recycling, and auditing alternative to incineration of PCBs

  2. Evaluation of a Secondary School Science Program Inversion: Moving from a Traditional to a Modifified-PCB Sequence

    Science.gov (United States)

    Gaubatz, Julie

    2013-01-01

    Studies of high-school science course sequences have been limited primarily to a small number of site-specific investigations comparing traditional science sequences (e.g., Biology-Chemistry-Physics: BCP) to various Physics First-influenced sequences (Physics-Chemistry-Biology: PCB). The present study summarizes a five-year program evaluation…

  3. The Engineering Of PCB Processing Machine

    International Nuclear Information System (INIS)

    Handoyo, Demon; Satmoko, Ari; T, Sapta; Heru, G. B.

    2001-01-01

    The engineering of PCB processing machine had been done. Purposes of the engineering of PCB processing machine are used to process PCB and to get the data's of characteristic of PCB processing. Further, these data's will be used as setting point when processing of PCB is done with manual and automatic control. The method of processing of PCB are inserting and pulling of the PCB rack to and from Ferro chlorite using electrical motor to corrosive Cu shield parts witch is not used. The experiment have result that the characteristic of operation of PCB processing machine as we hope when designing

  4. An assessment of PCB degradation by microogransims including methods for measuring mineralization

    Energy Technology Data Exchange (ETDEWEB)

    Hadden, C.; Edenborn, H.; Osborne, T.; Holdsworth, G.; Revis, N.

    1990-12-31

    These studies sought to isolate and identify organism(s) from PCB contaminated soil and sediment that degrade PCB; to provide information on the potential of organisms in soil samples taken from a PCB-contaminated area to mineralize or dechlorinate PCB congeners; to assess potential enhancement of PCB biodegradation as a result of nutritional amendment of the samples; and to carry out analyses of successive lysimeter samples to determine whether field treatments have had an effect on the capacity of soil microbes to mineralize PCBS. We have expended considerable effort to validate the fractionation procedure used to assess mineralization and conversion of PCB substrates. The assessment relies on the ability to measure [{sup 14}C]-labeled CO{sub 2} in the presence of potentially volatile [{sup 14}C]-labeled PCB and degradation products to differentiate between volatile and non-volatile [{sup 14}C]-labeled compounds between water-soluble products of metabolism and a mixture of unchanged substrate and other water-insoluble products and between metabolism and loss or non-extractability of the substrate.

  5. An assessment of PCB degradation by microogransims including methods for measuring mineralization

    International Nuclear Information System (INIS)

    Hadden, C.; Edenborn, H.; Osborne, T.; Holdsworth, G.; Revis, N.

    1990-01-01

    These studies sought to isolate and identify organism(s) from PCB contaminated soil and sediment that degrade PCB; to provide information on the potential of organisms in soil samples taken from a PCB-contaminated area to mineralize or dechlorinate PCB congeners; to assess potential enhancement of PCB biodegradation as a result of nutritional amendment of the samples; and to carry out analyses of successive lysimeter samples to determine whether field treatments have had an effect on the capacity of soil microbes to mineralize PCBS. We have expended considerable effort to validate the fractionation procedure used to assess mineralization and conversion of PCB substrates. The assessment relies on the ability to measure [ 14 C]-labeled CO 2 in the presence of potentially volatile [ 14 C]-labeled PCB and degradation products to differentiate between volatile and non-volatile [ 14 C]-labeled compounds between water-soluble products of metabolism and a mixture of unchanged substrate and other water-insoluble products and between metabolism and loss or non-extractability of the substrate

  6. Inside-sediment partitioning of PAH, PCB and organochlorine compounds and inferences on sampling and normalization methods

    International Nuclear Information System (INIS)

    Opel, Oliver; Palm, Wolf-Ulrich; Steffen, Dieter; Ruck, Wolfgang K.L.

    2011-01-01

    Comparability of sediment analyses for semivolatile organic substances is still low. Neither screening of the sediments nor organic-carbon based normalization is sufficient to obtain comparable results. We are showing the interdependency of grain-size effects with inside-sediment organic-matter distribution for PAH, PCB and organochlorine compounds. Surface sediment samples collected by Van-Veen grab were sieved and analyzed for 16 PAH, 6 PCB and 18 organochlorine pesticides (OCP) as well as organic-matter content. Since bulk concentrations are influenced by grain-size effects themselves, we used a novel normalization method based on the sum of concentrations in the separate grain-size fractions of the sediments. By calculating relative normalized concentrations, it was possible to clearly show underlying mechanisms throughout a heterogeneous set of samples. Furthermore, we were able to show that, for comparability, screening at <125 μm is best suited and can be further improved by additional organic-carbon normalization. - Research highlights: → New method for the comparison of heterogeneous sets of sediment samples. → Assessment of organic pollutants partitioning mechanisms in sediments. → Proposed method for more comparable sediment sampling. - Inside-sediment partitioning mechanisms are shown using a new mathematical approach and discussed in terms of sediment sampling and normalization.

  7. Surveillance program for former PCB-exposed workers of a transformer and capacitor recycling company, family members, employees of surrounding companies, and area residents--executive summary.

    Science.gov (United States)

    Kraus, Thomas; Gube, Monika; Lang, Jessica; Esser, Andre; Sturm, Walter; Fimm, Bruno; Willmes, Klaus; Neulen, Joseph; Baron, Jens Malte; Merk, Hans; Schettgen, Thomas; Konrad, Kerstin; Deisz, Sabine; Rink, Lothar; Hagmann, Michael; Fillies, Birgit; Zschiesche, Wolfgang; Wittsiepe, Jürgen; Wilhelm, Michael

    2012-01-01

    In a German company polychlorinated biphenyls (PCB)-containing transformers and capacitors were recycled on a large scale. Human biomonitoring revealed a high PCB body burden in workers of the recycling company, in surrounding locations of this plant, in companies in the neighborhood of this plant, and in family members of these employees. In order to clarify whether possible adverse health effects occurred or may occur in the future, a prospective surveillance program was initiated. After an extensive literature search, an interdisciplinary group of experts developed a surveillance program based on current knowledge with respect to possible adverse health effects that might occur in the recycling process of transformers and capacitors. Exposure to various hazardous substances (PCB, polychlorinated dibenzo-p-dioxins and dibenzo-furans [PCDD/F], metals, solvents) was considered. Criteria derived from human biomonitoring results of PCB were used for admission to the program. Participants in the surveillance program are first informed about risks and aims of the program. Subsequently, physicians started a detailed documentation of participants' general and occupational history, with their complaints, diseases, and nutritional habits, as well as information regarding their living areas, by means of a standardized questionnaire. In addition, separate examinations were performed to detect possible neurological, immunological, (neuro)psychological, hormonal, and skin effects. Moreover, DNA exposure as assessed by the comet assay and antioxidative status were determined. The program will be offered at yearly intervals for 3 years, and then at 5 and 10 years after program onset. Until now the program has proved to be feasible, and acceptance among workers and their families has been high. Based on the results, criteria will be developed to define adverse health effects that might be attributable to a hazardous substance exposure.

  8. Serum PCB levels and congener profiles among teachers in PCB-containing schools: a pilot study

    Science.gov (United States)

    2011-01-01

    Background PCB contamination in the built environment may result from the release of PCBs from building materials. The significance of this contamination as a pathway of human exposure is not well-characterized, however. This research compared the serum PCB concentrations, and congener profiles between 18 teachers in PCB-containing schools and referent populations. Methods Blood samples from 18 teachers in PCB-containing schools were analyzed for 57 PCB congeners. Serum PCB concentrations and congener patterns were compared between the teachers, to the 2003-4 NHANES (National Health and Nutrition Examination Survey) data, and to data from 358 Greater Boston area men. Results Teachers at one school had higher levels of lighter (PCB 6-74) congeners compared to teachers from other schools. PCB congener 47 contributed substantially to these elevated levels. Older teachers (ages 50-64) from all schools had higher total (sum of 33 congeners) serum PCB concentrations than age-comparable NHANES reference values. Comparing the teachers to the referent population of men from the Greater Boston area (all under age 51), no difference in total serum PCB levels was observed between the referents and teachers up to 50 years age. However, the teachers had significantly elevated serum concentrations of lighter congeners (PCB 6-74). This difference was confirmed by comparing the congener-specific ratios between groups, and principal component analysis showed that the relative contribution of lighter congeners differed between the teachers and the referents. Conclusions These findings suggest that the teachers in the PCB-containing buildings had higher serum levels of lighter PCB congeners (PCB 6-74) than the referent populations. Examination of the patterns, as well as concentrations of individual PCB congeners in serum is essential to investigating the contributions from potential environmental sources of PCB exposure. PMID:21668970

  9. Biomarkers and bioassays as alternative screening methods for the presence and effects of PCDD, PCDF and PCB

    International Nuclear Information System (INIS)

    Bosveld, A.T.C.B.; Berg, M.V.

    1994-01-01

    Polyhalogenated aromatic hydrocarbons (PHAH) are wide spread, highly toxic, environmental contaminants. As such they pose risks for both humans and wildlife. For risk assessment purposes, concentrations are generally analyzed by HRGC-HR/LRMS. With the analytical data, mixture toxicity is calculated using the TEF concept. With this method only the defined congeners are taken into account and additivity for all congeners is assumed, whereas synergistic and antagonistic effects for several PCDD/F in combination with PCB have also been reported. To avoid these problems and high analytical costs, bioassays can be used for screening purposes. Cytochrome P 450 1 A 1 induction and vitamin A and thyroid hormone levels are shown to be useful markers for PHAH exposure. When bioassays based on cytochrome P 450 1 A 1 induction, in cultured cells, in multi-well culturing plates, are used, 2,3,7,8-TCDD detection limits <0.2 pg are possible. As such these bioassays are highly sensitive, cost effective and time saving. This application can be used as a pre-screening method to determine total ''dioxin'' content of environmental samples. (orig.)

  10. Postnatal exposure to PCB 153 and PCB 180, but not to PCB 52, produces changes in activity level and stimulus control in outbred male Wistar Kyoto rats

    Directory of Open Access Journals (Sweden)

    Walaas S

    2011-05-01

    Full Text Available Abstract Background Polychlorinated biphenyls (PCBs are a class of organic compounds that bioaccumulate due to their chemical stability and lipophilic properties. Humans are prenatally exposed via trans-placental transfer, through breast milk as infants, and through fish, seafood and fatty foods as adolescents and adults. Exposure has several reported effects ranging from developmental abnormalities to cognitive and motor deficiencies. In the present study, three experimental groups of rats were orally exposed to PCBs typically found in human breast milk and then behaviorally tested for changes in measures of stimulus control (percentage lever-presses on the reinforcer-producing lever, activity level (responses with IRTs > 0.67 s, and responses with short IRTs ( Methods Male offspring from Wistar Kyoto (WKY/NTac dams purchased pregnant from Taconic Farms (Germantown, NY were orally given PCB at around postnatal day 8, 14, and 20 at a dose of 10 mg/kg body weight at each exposure. Three experimental groups were exposed either to PCB 52, PCB 153, or PCB 180. A fourth group fed corn oil only served as controls. From postnatal day 25, for 33 days, the animals were tested for behavioral changes using an operant procedure. Results PCB exposure did not produce behavioral changes during training when responding was frequently reinforced using a variable interval 3 s schedule. When correct responses were reinforced on a variable interval 180 s schedule, animals exposed to PCB 153 or PCB 180 were less active than controls and animals exposed to PCB 52. Stimulus control was better in animals exposed to PCB 180 than in controls and in the PCB 52 group. Also, the PCB 153 and PCB 180 groups had fewer responses with short IRTs than the PCB 52 group. No effects of exposure to PCB 52 were found when compared to controls. Conclusions Exposure to PCBs 153 and 180 produced hypoactivity that continued at least five weeks after the last exposure. No effects of

  11. Intercomparison study of sampling methods for the determination of polychlorinated biphenyl (PCB) in seawater

    International Nuclear Information System (INIS)

    Schulz-Bull, D.E.

    1999-01-01

    The determination of organic pollutants in seawater is a serious problem, as their concentrations in the water column are typical in the fg - ng/L range. Available methods therefore includes extensive sampling and laboratory work. The development of simple sampling techniques for organochlorines (e.g. passive sampling with semipermeable membrane device (SPMD), mussel watch) is required. Three methods for the measurement of trace organochlorines in seawater were investigated: (1) the filtration (GF/F) and extraction (XAD-2 resin) of seawater with an in-situ pumping system, (2) biological-accumulation by mussels (mytilus edulis) and (3) passive sampling with SPMD

  12. PCB Fault Detection Using Image Processing

    Science.gov (United States)

    Nayak, Jithendra P. R.; Anitha, K.; Parameshachari, B. D., Dr.; Banu, Reshma, Dr.; Rashmi, P.

    2017-08-01

    The importance of the Printed Circuit Board inspection process has been magnified by requirements of the modern manufacturing environment where delivery of 100% defect free PCBs is the expectation. To meet such expectations, identifying various defects and their types becomes the first step. In this PCB inspection system the inspection algorithm mainly focuses on the defect detection using the natural images. Many practical issues like tilt of the images, bad light conditions, height at which images are taken etc. are to be considered to ensure good quality of the image which can then be used for defect detection. Printed circuit board (PCB) fabrication is a multidisciplinary process, and etching is the most critical part in the PCB manufacturing process. The main objective of Etching process is to remove the exposed unwanted copper other than the required circuit pattern. In order to minimize scrap caused by the wrongly etched PCB panel, inspection has to be done in early stage. However, all of the inspections are done after the etching process where any defective PCB found is no longer useful and is simply thrown away. Since etching process costs 0% of the entire PCB fabrication, it is uneconomical to simply discard the defective PCBs. In this paper a method to identify the defects in natural PCB images and associated practical issues are addressed using Software tools and some of the major types of single layer PCB defects are Pattern Cut, Pin hole, Pattern Short, Nick etc., Therefore the defects should be identified before the etching process so that the PCB would be reprocessed. In the present approach expected to improve the efficiency of the system in detecting the defects even in low quality images

  13. Automated PCB Inspection System

    Directory of Open Access Journals (Sweden)

    Syed Usama BUKHARI

    2017-05-01

    Full Text Available Development of an automated PCB inspection system as per the need of industry is a challenging task. In this paper a case study is presented, to exhibit, a proposed system for an immigration process of a manual PCB inspection system to an automated PCB inspection system, with a minimal intervention on the existing production flow, for a leading automotive manufacturing company. A detailed design of the system, based on computer vision followed by testing and analysis was proposed, in order to aid the manufacturer in the process of automation.

  14. Compound- and sex-specific effects on programming of energy and immune homeostasis in adult C57BL/6JxFVB mice after perinatal TCDD and PCB 153

    Energy Technology Data Exchange (ETDEWEB)

    Esterik, J.C.J. van, E-mail: joantine.van.esterik@rivm.nl [Center for Health Protection, National Institute for Public Health and the Environment (RIVM), PO Box 1, 3720 BA Bilthoven (Netherlands); Department of Chemistry and Biology, Institute for Environmental Studies (IVM), VU University, De Boelelaan 1085, 1081 HV Amsterdam (Netherlands); Verharen, H.W., E-mail: henny.verharen@rivm.nl [Center for Health Protection, National Institute for Public Health and the Environment (RIVM), PO Box 1, 3720 BA Bilthoven (Netherlands); Hodemaekers, H.M., E-mail: hennie.hodemaekers@rivm.nl [Center for Health Protection, National Institute for Public Health and the Environment (RIVM), PO Box 1, 3720 BA Bilthoven (Netherlands); Gremmer, E.R., E-mail: eric.gremmer@rivm.nl [Center for Health Protection, National Institute for Public Health and the Environment (RIVM), PO Box 1, 3720 BA Bilthoven (Netherlands); Nagarajah, B., E-mail: bhawani.nagarajah@rivm.nl [Center for Health Protection, National Institute for Public Health and the Environment (RIVM), PO Box 1, 3720 BA Bilthoven (Netherlands); Kamstra, J.H., E-mail: jorke.kamstra@vu.nl [Department of Chemistry and Biology, Institute for Environmental Studies (IVM), VU University, De Boelelaan 1085, 1081 HV Amsterdam (Netherlands); Dollé, M.E.T., E-mail: martijn.dolle@rivm.nl [Center for Health Protection, National Institute for Public Health and the Environment (RIVM), PO Box 1, 3720 BA Bilthoven (Netherlands); Legler, J., E-mail: juliette.legler@vu.nl [Department of Chemistry and Biology, Institute for Environmental Studies (IVM), VU University, De Boelelaan 1085, 1081 HV Amsterdam (Netherlands); Ven, L.T.M. van der, E-mail: leo.van.der.ven@rivm.nl [Center for Health Protection, National Institute for Public Health and the Environment (RIVM), PO Box 1, 3720 BA Bilthoven (Netherlands)

    2015-12-01

    Early life exposure to endocrine disrupting compounds has been linked to chronic diseases later in life, like obesity and related metabolic disorders. We exposed C57BL/6JxFVB hybrid mice to the aryl hydrocarbon receptor agonist 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and the constitutive androstane receptor/pregnane X receptor agonist polychlorinated biphenyl 153 (PCB 153) in an experimental design relevant for human exposure. Exposure occurred during gestation and lactation via maternal feed to a wide dose range (TCDD: 10–10,000 pg/kg body weight/day; PCB 153: 0.09–1406 μg/kg body weight/d). Then exposure was ceased and offspring were followed up to 1 year of age. Metabolic parameters like body weight, fat pad weights, glucose tolerance, endocrine serum profile, and neurobehavioral and immunological parameters were determined. Body weight was transiently affected by both compounds throughout the follow-up. TCDD-exposed males showed decreased fat pad and spleen weights and an increase in IL-4 production of splenic immune cells. In contrast, females showed increased fat pad weights and production of IFNγ. PCB 153-exposed males showed an increase in glucose, whereas females showed an increase in glucagon, a decrease in pancreas weight, and an increase in thymus weight. In conclusion, early life exposure to TCDD appears to affect programming of energy and immune homeostasis in offspring, whereas the effects of perinatal PCB 153 were mainly on programming of glucose homeostasis. Both compounds act sex-specifically. Lowest derived BMDLs (lower bounds of the (two sided) 90%-confidence interval for the benchmark dose) for both compounds are not lower than current tolerable daily intakes. - Highlights: • Early life exposure to TCDD affects programming of energy and immune homeostasis. • Early life exposure to PCB 153 affects programming of energy homeostasis. • Both compounds act sex-specifically. • Lowest derived BMDLs for both TCDD and PCB 153 are not

  15. Compound- and sex-specific effects on programming of energy and immune homeostasis in adult C57BL/6JxFVB mice after perinatal TCDD and PCB 153

    International Nuclear Information System (INIS)

    Esterik, J.C.J. van; Verharen, H.W.; Hodemaekers, H.M.; Gremmer, E.R.; Nagarajah, B.; Kamstra, J.H.; Dollé, M.E.T.; Legler, J.; Ven, L.T.M. van der

    2015-01-01

    Early life exposure to endocrine disrupting compounds has been linked to chronic diseases later in life, like obesity and related metabolic disorders. We exposed C57BL/6JxFVB hybrid mice to the aryl hydrocarbon receptor agonist 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and the constitutive androstane receptor/pregnane X receptor agonist polychlorinated biphenyl 153 (PCB 153) in an experimental design relevant for human exposure. Exposure occurred during gestation and lactation via maternal feed to a wide dose range (TCDD: 10–10,000 pg/kg body weight/day; PCB 153: 0.09–1406 μg/kg body weight/d). Then exposure was ceased and offspring were followed up to 1 year of age. Metabolic parameters like body weight, fat pad weights, glucose tolerance, endocrine serum profile, and neurobehavioral and immunological parameters were determined. Body weight was transiently affected by both compounds throughout the follow-up. TCDD-exposed males showed decreased fat pad and spleen weights and an increase in IL-4 production of splenic immune cells. In contrast, females showed increased fat pad weights and production of IFNγ. PCB 153-exposed males showed an increase in glucose, whereas females showed an increase in glucagon, a decrease in pancreas weight, and an increase in thymus weight. In conclusion, early life exposure to TCDD appears to affect programming of energy and immune homeostasis in offspring, whereas the effects of perinatal PCB 153 were mainly on programming of glucose homeostasis. Both compounds act sex-specifically. Lowest derived BMDLs (lower bounds of the (two sided) 90%-confidence interval for the benchmark dose) for both compounds are not lower than current tolerable daily intakes. - Highlights: • Early life exposure to TCDD affects programming of energy and immune homeostasis. • Early life exposure to PCB 153 affects programming of energy homeostasis. • Both compounds act sex-specifically. • Lowest derived BMDLs for both TCDD and PCB 153 are not

  16. 77 FR 11533 - Anniston PCB Superfund Site, Anniston, Calhoun County, Alabama; Notice of Amended Settlement

    Science.gov (United States)

    2012-02-27

    ... ENVIRONMENTAL PROTECTION AGENCY [CERCLA-04-2012-3763; FRL 9637-7] Anniston PCB Superfund Site... past response costs concerning the Anniston PCB Superfund Site located in Anniston, Calhoun County.... Submit your comments by Site name Anniston PCB by one of the following methods: www.epa.gov/region4...

  17. Radioactive and non-radioactive polychlorinated biphenyl (PCB) management at Hanford

    International Nuclear Information System (INIS)

    Leonard, W.W.; Gretzinger, R.F.; Cox, G.R.

    1986-01-01

    Conformance to all state and federal regulations is the goal of Rockwell in the management of both radioactive and non-radioactive PCB's at Hanford. A continuing effort is being made to locate, remove, and properly dispose of all PCB's. As improved methods of management are developed, consideration will be given to them for their adaptation into the Hanford Site PCB Management Plan

  18. Microbial decomposition of PCB. PCB no biseibutsu bunkai

    Energy Technology Data Exchange (ETDEWEB)

    Furukawa, K [Kyushu University, Fukuoka (Japan). Faculty of Agriculture

    1993-08-01

    This paper generalizes knowledges acquired so far on bio-remediation of PCB. Aerobic PCB decomposition using soil bacteria generally goes through introduction of O2 into second and third orders of a biphenyl ring, ring cleavage, and hydrolysis, and generates benzoate finally. PCB that is decomposed in this 2, 3-dioxygenaze path requires at least one of the second and third orders to be open. The decomposition through this path becomes difficult when the number of displaced Cl increases, and PCB with Cl displaced in only one of the rings decomposes more easily than PCB with the same number of Cl in both rings. A group in GE, Inc. has searched for two kinds of bacteria stocks that introduce O2 preferentially into the third and fourth orders. These stocks decompose third and fourth ordered open high-chlorine PCB. Groups in GE, Inc. and other companies have isolated bacteria that dechlorinate PCB decreasingly under an anaerobic condition. These bacteria desorb metha-ordered chlorine. Discussions are being made on cloning of PCB decomposing genes, and breeding of decomposing bacteria that have wide PCB decomposing spectra. 22 refs., 8 figs., 2 tabs.

  19. Comparison of the in vitro effects of TCDD, PCB 126 and PCB 153 on thyroid-restricted gene expression and thyroid hormone secretion by the chicken thyroid gland.

    Science.gov (United States)

    Katarzyńska, Dorota; Hrabia, Anna; Kowalik, Kinga; Sechman, Andrzej

    2015-03-01

    The aim of this study was to compare the in vitro effects of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), 3,3',4,4',5-pentachlorobiphenyl (PCB 126; a coplanar PCB congener) and 2,2'4,4',5,5'-hexachlorobiphenyl (PCB153; non-coplanar PCB) on mRNA expression of thyroid-restricted genes, i.e. sodium iodide symporter (NIS), thyroid peroxidase (TPO) and thyroglobulin (TG), and thyroid hormone secretion from the thyroid gland of the laying chicken. Relative expression levels of NIS, TG and TPO genes and thyroxine (T4) and triiodothyronine (T3) secretion from the thyroidal explants were quantified by the real-time qPCR and RIA methods, respectively. In comparison with the control group, TCDD and PCB 126 significantly increased mRNA expression of TPO and TG genes. TCDD did not affect NIS mRNA levels, but PCB 126 decreased its expression. No effect of PCB 153 on the expression of these genes was observed. TCDD and PCB 126 significantly decreased T4 and T3 secretion. There was no significant effect of PCB 153 on these hormone secretions. In conclusion, the results obtained show that in comparison with non-coplanar PCB 153, TCDD and coplanar PCB 126 can directly affect thyroid hormone synthesis and secretion, and in consequence, they may disrupt the endocrine function of the thyroid gland of the laying chicken. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Nonlinear programming analysis and methods

    CERN Document Server

    Avriel, Mordecai

    2012-01-01

    This text provides an excellent bridge between principal theories and concepts and their practical implementation. Topics include convex programming, duality, generalized convexity, analysis of selected nonlinear programs, techniques for numerical solutions, and unconstrained optimization methods.

  1. Programming the finite element method

    CERN Document Server

    Smith, I M; Margetts, L

    2013-01-01

    Many students, engineers, scientists and researchers have benefited from the practical, programming-oriented style of the previous editions of Programming the Finite Element Method, learning how to develop computer programs to solve specific engineering problems using the finite element method. This new fifth edition offers timely revisions that include programs and subroutine libraries fully updated to Fortran 2003, which are freely available online, and provides updated material on advances in parallel computing, thermal stress analysis, plasticity return algorithms, convection boundary c

  2. New technologies for PCB [polychlorinated biphenyl] decontamination

    International Nuclear Information System (INIS)

    Webber, I.

    1993-01-01

    Polychlorinated biphenyls (PCB) were mixed with chlorobenzenes to reduce viscosity and provide for both electrical insulation and convective heat transfers. These mixtures were known as askarels, and ca 99.8% of PCBs used in electrical applications are contained in askarel-filled transformers and capacitors. It is estimated that there are ca 180 million gal of PCB-contaminated oil distributed through over 3 million transformers in the USA. Technology used for decontaminating these transformers depends on the concentration of the PCB contamination. At low PCB concentrations of up to ca 2,000 ppM, chemical methods can be used; at higher concentrations, alternative disposal options become more attractive. For chemical treatment, a small mobile unit using quick-reacting reagents has been developed for on-site decontamination. For highly contaminated transformers, retrofilling is very attractive since the owner's liability is minimized at minimum cost. Conventional flush/drain procedures have such drawbacks as the inability to remove oil trapped in windings and the leaching of trapped PCBs back into the uncontaminated retrofill oil over time. A new process has been developed to solve the leaching problem and to decontaminate the drained askarel at room temperature using a catalyst. An alternative disposal strategy involves dismantling the transformer carcass, incinerating non-recyclable materials, and cleaning the metals and wire with solvent. 8 figs

  3. Methods for robustness programming

    NARCIS (Netherlands)

    Olieman, N.J.

    2008-01-01

    Robustness of an object is defined as the probability that an object will have properties as required. Robustness Programming (RP) is a mathematical approach for Robustness estimation and Robustness optimisation. An example in the context of designing a food product, is finding the best composition

  4. Removal of PCB from indoor air and surface materials by introduction of additional sorbing materials

    DEFF Research Database (Denmark)

    Gunnarsen, Lars Bo; Lyng, Nadja; Kolarik, Barbara

    2017-01-01

    Alleviation of indoor PCB contamination is extremely expensive because PCB from old primary sources has redistributed to most other surfaces over time. This study investigates the introduction of new removable sorbing materials as a method instantly lowering the concentration of PCB in indoor air...... and slowly decontaminating old surface materials. In three bedrooms of a contaminated apartment respectively new painted gypsum boards, sheets of flexible polyurethane foam and activated carbon fabric were introduced. The PCB concentrations in room air were monitored before the intervention and several times...... during the following 10 months. The PCB concentrations in the old surface materials as well as the new materials were also measured. An immediate reduction of PCB concentration in indoor air, a gradual increase of PCB in new material and as well a gradual reduction in old surface materials were...

  5. Measurement of hydroxylated PCB metabolites for Slovakia maternal blood serums

    Energy Technology Data Exchange (ETDEWEB)

    Park, J.S.; Athanasiadou, M; Bergman, A. [Stockholm Univ., Stockholm (Sweden); Charles, J.; Zhao, G.; Hertz-Picciotto, I. [California Univ., Sacramento, CA (United States); Petrik, J.; Kocan, A; Trnovec, T. [Bratislava Inst. of Preventive and Clinical Medicine, Bratislava (Slovakia)

    2005-07-01

    Although it is known that polychlorinated biphenyls (PCBs) have adverse impacts on human health, it is not clear if human health impacts are caused by the PCBs or their related hydroxylated (OH) PCB metabolite compounds. This study measured OH-PCB metabolites in the maternal blood serum specimens from the Svidnik and Michalovce areas in eastern Slovakia where PCBs were intensively produced and inadequately disposed. The aim of the study was to characterize and quantify levels of specific OH-PCB metabolites in Slovakian maternal serums exposed to high environmental PCB levels. All specimens were analyzed for PCBs, and a subset of the samples was analyzed for OH-PCB metabolites. The Wallenburg blood extraction method was adopted to separate the OH-PCBs from the blood serums. Final eluates and calibration standards were spiked with PCB209 as an injection standard before gas chromatography (GC) analysis. OH-PCBs in the samples range from 75{+-}9 per cent to 101{+-}11 per cent. Median concentrations of OH-PCB metabolites of Michalovce samples were approximately twice as high as for the Svidnik samples. Concentrations of OH-PCBs of Michalovce blood samples were comparable to samples obtained from northern Canadian female Inuit and Faroe Island females, and were considered to be among the highest OH-PCB concentrations obtained in human blood. It was concluded that further research is needed to understand the placental transfer of OH-PCBs to the fetus, as well as epidemiological approaches to determine the relationship between the exposure of OH-PCB metabolites and child development. 12 refs., 2 figs.

  6. Reference standards for quantitative trace analysis of PCB's by GC. Technical PCB formulations for the calibration of ECD and MSD responses

    Energy Technology Data Exchange (ETDEWEB)

    Krupcik, J. (Slovak Technical Univ., Department of Analytical Chemistry, Bratislava (Slovakia)); Kocan, A. (Institute of Preventive Medicine, Bratislava (Slovakia)); Petrik, J. (Institute of Preventive Medicine, Bratislava (Slovakia)); Leclercq, P.A. (Eindhoven University of Technology, Dept. of Chemical Engineering, Lab. of Instrumental Analysis (Netherlands)); Ballschmiter, K. (University of Ulm, Dept. of Analytical and Environmental Chemistry (Germany))

    1993-04-01

    The composition of any technical PCB formulation can be determined directly by analyzing the PCB sample by gas chromatography with a flame ionization detector (GC-FID), provided the relative molecular masses of the components are known. The response of electron capture and selected-ion monitoring, mass-spectra detectors can then be calibrated for individual PCB congeners by correlation of the chromatographic patterns with those of concentrated PCB samples obtained by GC-FID. This procedure, which uses a given technical PCB formulation as a secondary reference standard mixture, is to be preferred over existing calibration methods, when results with [+-]10% errors are acceptable because commercial PCB formulations cover the whole range of chlorination products. (orig.)

  7. Inspection Methods in Programming.

    Science.gov (United States)

    1981-06-01

    Counting is a a specialization of Iterative-generation in which the generating function is Oneplus ) Waters’ second category of plan building method...is Oneplus and the initial input is 1. 0 I 180 CHAPTER NINE -ta a acio f igr9-.IeaieGnrtoPln 7 -7 STEADY STATE PLANS 181 TemporalPlan counting...specializalion iterative-generation roles .action(afu nction) ,tail(counting) conslraints .action.op = oneplus A .action.input = 1 The lItcrative-application

  8. Separable programming theory and methods

    CERN Document Server

    Stefanov, Stefan M

    2001-01-01

    In this book, the author considers separable programming and, in particular, one of its important cases - convex separable programming Some general results are presented, techniques of approximating the separable problem by linear programming and dynamic programming are considered Convex separable programs subject to inequality equality constraint(s) and bounds on variables are also studied and iterative algorithms of polynomial complexity are proposed As an application, these algorithms are used in the implementation of stochastic quasigradient methods to some separable stochastic programs Numerical approximation with respect to I1 and I4 norms, as a convex separable nonsmooth unconstrained minimization problem, is considered as well Audience Advanced undergraduate and graduate students, mathematical programming operations research specialists

  9. Total destruction of PCB transformers

    International Nuclear Information System (INIS)

    Myers, D.S.

    1991-01-01

    This paper reports that if elimination of PCB liability, including lingering liabilities, is the goal, then landfilling cannot be and option. The law is clear that the generator of PCB waste is responsible for that waste until this destruction. Landfilling is not destruction. Retrofilling as askarel units will not get rid of all PCB liabilities, either. Askarel retrofilling can only make this claim when it can give a lifetime guaranty of no detectable PCBs. States like Washington and California regulate, as hazardous waste, fluids which contain greater than 2 and 5 ppm PCB, respectively. There is no guarantee that your state will not so regulate PCBs in the future or that the federal laws might tighten up. Therefore, replacement and disposal by Resource Recovery constitutes the only lifetime guarantee on the market that the PCBs in your askarel transformers will never come back to haunt you

  10. Dechlorination of PCB by radiation

    International Nuclear Information System (INIS)

    Shinozaki, Yoshiharu

    1978-01-01

    On the PCB poisoning accident in Japan occurred in 1968, Tokyo Metropolitan Isotope Research Center started to investigate the decomposition of PCB (polychlorinated biphenyl) on the request of Metropolitan government. The research center has found that if PCB is dissolved or extracted in alkaline 2-propanol solution and then irradiated with γ-ray, PCB is dechlorinated in chain-reactive manner, and biphenyl and salts (KCl or NaCl) are formed. Afterwards, it has been found that photolysis has also similar effect on PCB. Then, the basic design of a disposal pilot plant using ultraviolet ray and its economic evaluation have been performed, which is composed of photolysis reaction process, refining process and waste disposal process. However, its disposal cost only has reached the value three times as high as that of incineration process. If this is conducted by radiolysis, its disposal cost can be reduced to about 1/12 of that of ultraviolet ray system when an electron accelerator is employed. Cs-137 source gives better results than Co-60. Dechlorination process of PCB has been thus established. Further reduction of total cost will be the keypoint of radiolysis system to be adopted. If the application of electron accelerators to sludge treatment in the future, the effective use of recovered products, and the possibility of using Cs-137 large sources are considered, it is expected that the disposal cost of radiolysis process system becomes comparable with the incineration process. (Wakatsuki, Y.)

  11. Parametric Design and Rapid Prototyping of Installation Box for Vehicle Terminal PCB

    Directory of Open Access Journals (Sweden)

    Wang Xingxing

    2016-01-01

    Full Text Available Installation box for vehicle terminal PCB (Printed Circuit Board was took as research object, which is encountered in the process of project developing. Vehicle terminal PCB in actual development process was set as an example, point cloud data were acquired by three coordinate measuring method; Imageware software was used to reconstruct the vehicle terminal PCB model, basic size parameters of vehicle terminal PCB can be got and then design parameters of installation box for vehicle terminal PCB can be determined. Design of the installation box for vehicle terminal PCB was completed based on Solidworks software, then 3D modeling and 2D drawing of installation box for vehicle terminal PCB was gained. Up Plus 2 rapid prototype machine was used to manufacture installation box for vehicle terminal PCB rapidly based on 3D printing technology, then prototype of installation box for vehicle terminal PCB was obtained. It is of certain engineering significant for single (small amount manufacturing of installation box for general PCB.

  12. PCB138, but not PCB153 and PCB180, acts as a weak antiandrogen in vitro

    DEFF Research Database (Denmark)

    Vinggaard, A.M.; Bonefeld-Jørgensen, Eva Cecilie

    2000-01-01

    The polychlorinated biphenyls (PCBs) constitute a group of persistent environmental chemicals including 209 possible congeners exhibiting a variety of chlorine substitution patterns. Due to their lipophilic nature and resistance toward biotransformation, PCBs accumulate in the food chain and all...... environmental matrixes including human adipose tissue, blood and milk. In most biological extracts PCB#138 (2,2',3,4,4',5-hexaCB), PCB#153 (2,2',4,4',5,5'-hexaCB), and PCB#180 (2,2',3,4,4',5,5'-heptaCB) are the dominating components. Depending on the position and number of chlorine substitutions, different...... classes of PCB congeners elicit a complex spectrum of biological and toxic responses in in vivo and in vitro models. Some PCBs exert dioxin-like activities mediated through the aryl hydrocarbon receptor (Ah receptor) giving rise to health risk such as organ toxicity and carcinogenesis. Although reports...

  13. Monitoring OH-PCBs in PCB transport worker's urine as a non-invasive exposure assessment tool.

    Science.gov (United States)

    Haga, Yuki; Suzuki, Motoharu; Matsumura, Chisato; Okuno, Toshihiro; Tsurukawa, Masahiro; Fujimori, Kazuo; Kannan, Narayanan; Weber, Roland; Nakano, Takeshi

    2018-04-14

    In this study, we analyzed hydroxylated polychlorinated biphenyls (OH-PCBs) in urine of both PCB transport workers and PCB researchers. A method to monitor OH-PCB in urine was developed. Urine was solid-phase extracted with 0.1% ammonia/ methanol (v/v) and glucuronic acid/sulfate conjugates and then decomposed using β-glucuronidase/arylsulfatase. After alkaline digestion/derivatization, the concentration of OH-PCBs was determined by HRGC/HRMS-SIM. In the first sampling campaign, the worker's OH-PCB levels increased several fold after the PCB waste transportation work, indicating exposure to PCBs. The concentration of OH-PCBs in PCB transport workers' urine (0.55~11 μg/g creatinine (Cre)) was higher than in PCB researchers' urine (PCB storage area. In the second sampling, after recommended PCB exposure reduction measures had been enacted, the worker's PCB levels did not increase during handling of PCB equipment. This suggests that applied safety measures improved the situation. Hydroxylated trichlorobiphenyls (OH-TrCBs) were identified as a major homolog of OH-PCBs in urine. Also, hydroxylated tetrachlorobiphenyls (OH-TeCBs) to hydroxylated hexachlorobiphenyls (OH-HxCBs) were detected. For the sum of ten selected major indicators, a strong correlation to total OH-PCBs were found and these can possibly be used as non-invasive biomarkers of PCB exposure in workers managing PCB capacitors and transformer oils. We suggest that monitoring of OH-PCBs in PCB management projects could be considered a non-invasive way to detect exposure. It could also be used as a tool to assess and improve PCB management. This is highly relevant considering the fact that in the next 10 years, approx. 14 million tons of PCB waste need to be managed. Also, the selected populations could be screened to assess whether exposure at work, school, or home has taken place.

  14. Microbial ecology of bacterially mediated PCB biodegradation

    International Nuclear Information System (INIS)

    Pettigrew, C.A. Jr.

    1989-01-01

    The roles of plasmid mediated and consortia mediated polychlorinated biphenyl (PCB) biodegradation by bacterial populations isolated from PCB contaminated freshwater sediments were investigated. PCB degrading bacteria were isolated by DNA:DNA colony hybridization, batch enrichments, and chemostat enrichment. Analysis of substrate removal and metabolite production were done using chlorinated biphenyl spray plates, reverse phase high pressure liquid chromatography, Cl - detection, and 14 C-labeled substrate mineralization methods. A bacterial consortium, designated LPS10, involved in a concerted metabolic attack on chlorinated biphenyls, was shown to mineralize 4-chlorobiphenyl (4CB) and 4,4'-dichlorobiphenyl (4,4' CB). The LPS10 consortium was isolated by both batch and chemostat enrichment using 4CB and biphenyl (BP) as sole carbon source and was found to have tree bacterial isolates that predominated; these included: Pseudomonas, testosteroni LPS10A which mediated the breakdown of 4CB and 4,4' CB to the putative meta-cleavage product and subsequently to 4-chlorobenzoic acid (4CBA), an isolate tentatively identified as an Arthrobacter sp. LPS10B which mediated 4CBA degradation, and Pseudomonas putida by A LPS10C whose role in the consortium has not been determined

  15. PCB management at Manitoba Hydro's Waverley Service Centre

    International Nuclear Information System (INIS)

    Rempel, R.G.; Engstrom, T.

    1996-01-01

    Manitoba Hydro was the first Canadian utility to initiate a program to decontaminate insulating oil contaminated with polychlorinated biphenyls (PCBs). This paper describes Manitoba Hydro's recovery, reuse and recycling program, operated out of the utility's Waverley Service Centre (WSC). The WSC is a central facility serving to phase out and and destroy PCBs which remain in Manitoba Hydro's electrical system. Several hundred thousand litres of PCB-contaminated insulating oil are decontaminated annually at the WSC. The decontaminated oil is then reconditioned for reuse within the system operations. A PCBX unit was purchased from Sun Ohio for the decontamination of insulating oils containing PCBs. PCB decontamination is achieved through a chemical dechlorination treatment process. The PCBX treatment unit and the PCB storage building were described. 18 refs., 8 figs

  16. Sampling methodology and PCB analysis

    International Nuclear Information System (INIS)

    Dominelli, N.

    1995-01-01

    As a class of compounds PCBs are extremely stable and resist chemical and biological decomposition. Diluted solutions exposed to a range of environmental conditions will undergo some preferential degradation and the resulting mixture may differ considerably from the original PCB used as insulating fluid in electrical equipment. The structure of mixtures of PCBs (synthetic compounds prepared by direct chlorination of biphenyl with chlorine gas) is extremely complex and presents a formidable analytical problem, further complicated by the presence of PCBs as contaminants in oils to soils to water. This paper provides some guidance into sampling and analytical procedures; it also points out various potential problems encountered during these processes. The guidelines provided deal with sample collection, storage and handling, sample stability, laboratory analysis (usually gas chromatography), determination of PCB concentration, calculation of total PCB content, and quality assurance. 1 fig

  17. Polychlorinated Biphenyls (PCB) Residue Effects Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The PCB Residue Effects (PCBRes) Database was developed to assist scientists and risk assessors in correlating PCB and dioxin-like compound residues with toxic...

  18. Modular programming method at JAERI

    International Nuclear Information System (INIS)

    Asai, Kiyoshi; Katsuragi, Satoru

    1982-02-01

    In this report the histories, concepts and a method for the construction and maintenance of nuclear code systems of Japan Atomic Energy Research Institute (JAERI) are presented. The method is mainly consisted of novel computer features. The development process of the features and experiences with them which required many man-months and efforts of scientists and engineers of JAERI and a computer manufacturer are also described. One of the features is a file handling program named datapool. The program is being used in code systems which are under development at JAERI. The others are computer features such as dynamic linking, reentrant coding of Fortran programs, interactive programming facility, document editor, quick system output viewer and editor, flexible man-machine interactive Fortran executor, and selective use of time-sharing or batch oriented computer in an interactive porgramming environment. In 1980 JAERI has replaced its two old computer systems by three FACOM M-200 computer systems and they have such features as mentioned above. Since 1981 most code systems, or even big single codes can be changed to modular code systems even if the developers or users of the systems will not recognize the fact that they are using modular code systems. The purpose of this report is to describe our methodology of modular programming from aspects of computer features and some of their applications to nuclear codes to get sympathetic understanding of it from persons of organizations who are concerned with the effective use of computers, especially, in nuclear research fields. (author)

  19. Treating PCB contaminated light ballasts

    International Nuclear Information System (INIS)

    Day, B.

    1995-01-01

    Development and salient features of CON TECH PCB, a light ballast reduction process to allow PCB waste owners to best utilize storage space for the long-term regulated storage of PCBs, or to prepare them for final destruction and to reduce destruction costs, was reviewed. The essence of the process is ballast splitting, i.e. the breaking of the ballast and removing the capacitor containing the toxic PCBs. The work is done in a specially fitted mobile processing unit, thus reducing the storage requirements by better than 50 per cent. Details of the process and some cost and storage facility estimates were provided

  20. Estimating dermal transfer from PCB-contaminated porous surfaces.

    Science.gov (United States)

    Slayton, T M; Valberg, P A; Wait, A D

    1998-06-01

    Health risks posed by dermal contact with PCB-contaminated porous surfaces have not been directly demonstrated and are difficult to estimate indirectly. Surface contamination by organic compounds is commonly assessed by collecting wipe samples with hexane as the solvent. However, for porous surfaces, hexane wipe characterization is of limited direct use when estimating potential human exposure. Particularly for porous surfaces, the relationship between the amount of organic material collected by hexane and the amount actually picked up by, for example, a person's hand touch is unknown. To better mimic PCB pickup by casual hand contact with contaminated concrete surfaces, we used alternate solvents and wipe application methods that more closely mimic casual dermal contact. Our sampling results were compared to PCB pickup using hexane-wetted wipes and the standard rubbing protocol. Dry and oil-wetted samples, applied without rubbing, picked up less than 1% of the PCBs picked up by the standard hexane procedure; with rubbing, they picked up about 2%. Without rubbing, saline-wetted wipes picked up 2.5%; with rubbing, they picked up about 12%. While the nature of dermal contact with a contaminated surface cannot be perfectly reproduced with a wipe sample, our results with alternate wiping solvents and rubbing methods more closely mimic hand contact than the standard hexane wipe protocol. The relative pickup estimates presented in this paper can be used in conjunction with site-specific PCB hexane wipe results to estimate dermal pickup rates at sites with PCB-contaminated concrete.

  1. PCB eksponering i Farum Midtpunkt

    DEFF Research Database (Denmark)

    Meyer, Harald William; Frederiksen, Marie; Ebbehøj, Niels Erik

    I marts og april 2011 blev i alt 104 lejligheder og 289 beboere fra Farum Midtpunkt undersøgt for niveauer af PolyChlorerede Biphenyler (PCB) i henholdsvis fuger og indeluft i lejligheder-ne, og i blodplasma. Til analyserne i denne rapport indgik 273 beboere, 139 fra PCB-forurenede lejligheder og...... 134 fra ikke-forurenede lejligheder. Der blev indsamlet luftprøver fra 83 forure-nede og 21 ikke-forurenede lejligheder og fugeprøver fra 20 forurenede lejligheder. Ni ud af 24 målte PCB-kongenere var under detektionsgrænsen i luften, inkl. de to mest toksiske kongenere nr. 126 og 169. For de...... forurenede lejlig-heder, undtagen for nr. 183 og 190, samt for nr. 182 som alle lå under detektionsgrænsen. For ni ud af tolv dioxin-lignende PCB-forbindelser var alle, eller næsten alle prøver under detektions-grænsen. For nr. 105 og 118 sås signifikant højere niveau blandt eksponerede. Mænd havde et lidt...

  2. Fast and parallel determination of PCB 77 and PCB 180 in plasma using ultra performance liquid chromatography with diode array detection: A pharmacokinetic study in Swiss albino mouse.

    Science.gov (United States)

    Ramanujam, N; Sivaselvakumar, M; Ramalingam, S

    2017-11-01

    A simple, sensitive and reproducible ultra-performance liquid chromatography (UPLC) method has been developed and validated for simultaneous estimation of polychlorinated biphenyl (PCB) 77 and PCB 180 in mouse plasma. The sample preparation was performed by simple liquid-liquid extraction technique. The analytes were chromatographed on a Waters Acquity H class UPLC system using isocratic mobile phase conditions at a flow rate of 0.3 mL/min and Acquity UPLC BEH shield RP 18 column maintained at 35°C. Quantification was performed on a photodiode array detector set at 215 nm and PCB 101 was used as internal standard (IS). PCB 77, PCB 180, and IS retention times were 2.6, 4.7 and 2.8 min, respectively, and the total run time was 6 min. The method was validated for specificity, selectivity, recovery, linearity, accuracy, precision and sample stability. The calibration curve was linear over the concentration range 10-3000 ng/mL for PCB 77 and PCB 180. Intra- and inter-day precisions for PCBs 77 and 180 were found to be good with CV <4.64%, and the accuracy ranged from 98.90 to 102.33% in mouse plasma. The validated UPLC method was successfully applied to the pharmacokinetic study of PCBs 77 and 180 in mouse plasma. Copyright © 2017 John Wiley & Sons, Ltd.

  3. Evaluation and interconversion of various indicator PCB schemes for ∑PCB and dioxin-like PCB toxic equivalent levels in fish.

    Science.gov (United States)

    Gandhi, Nilima; Bhavsar, Satyendra P; Reiner, Eric J; Chen, Tony; Morse, Dave; Arhonditsis, George B; Drouillard, Ken G

    2015-01-06

    Polychlorinated biphenyls (PCBs) remain chemicals of concern more than three decades after the ban on their production. Technical mixture-based total PCB measurements are unreliable due to weathering and degradation, while detailed full congener specific measurements can be time-consuming and costly for large studies. Measurements using a subset of indicator PCBs (iPCBs) have been considered appropriate; however, inclusion of different PCB congeners in various iPCB schemes makes it challenging to readily compare data. Here, using an extensive data set, we examine the performance of existing iPCB3 (PCB 138, 153, and 180), iPCB6 (iPCB3 plus 28, 52, and 101) and iPCB7 (iPCB6 plus 118) schemes, and new iPCB schemes in estimating total of PCB congeners (∑PCB) and dioxin-like PCB toxic equivalent (dlPCB-TEQ) concentrations in sport fish fillets and the whole body of juvenile fish. The coefficients of determination (R(2)) for regressions conducted using logarithmically transformed data suggest that inclusion of an increased number of PCBs in an iPCB improves relationship with ∑PCB but not dlPCB-TEQs. Overall, novel iPCB3 (PCB 95, 118, and 153), iPCB4 (iPCB3 plus 138) and iPCB5 (iPCB4 plus 110) presented in this study and existing iPCB6 and iPCB7 are the most optimal indicators, while the current iPCB3 should be avoided. Measurement of ∑PCB based on a more detailed analysis (50+ congeners) is also overall a good approach for assessing PCB contamination and to track PCB origin in fish. Relationships among the existing and new iPCB schemes have been presented to facilitate their interconversion. The iPCB6 equiv levels for the 6.5 and 10 pg/g benchmarks of dlPCB-TEQ05 are about 50 and 120 ng/g ww, respectively, which are lower than the corresponding iPCB6 limits of 125 and 300 ng/g ww set by the European Union.

  4. Multiple mechanisms of PCB neurotoxicity

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, D.O.; Stoner, C.T.; Lawrence, D.A. [Univ. of New York, Albany, NY (United States)] [and others

    1996-12-31

    Polychlorinated biphenyls (PCBs) have been implicated in cancer, but many of the symptoms in humans exposed to PCBs are related to the nervous system and behavior. We demonstrated three different direct mechanisms whereby PCBs are neurotoxic in rats. By using flow cytometry, we demonstrated that the orthosubstituted PCB congener 2,4,4{prime}, but neither TCDD nor the coplanar PCB congener 3,4,5,3{prime},4{prime}, causes rapid death of cerebellar granule cells. The ortho-substituted congener 2,4,4{prime} reduced long-term potentiation, an indicator of cognitive potential, in hippocampal brain slices, but a similar effect was observed for the coplanar congener 3,4,3{prime},4{prime}, indicating that this effect may be caused by both ortho- and coplanar congeners by mechanisms presumably not mediated via the Ah receptor. It was previously shown that some ortho-substituted PCB congeners cause a reduction in levels of the neurotransmitter dopamine, and we present in vitro and in vivo evidence that this is due to reduction of synthesis of dopamine via inhibition of the enzyme tyrosine hydroxylase. Thus, PCBs have a variety of mechanisms of primary neurotoxicity, and neurotoxicity is a characteristic of ortho-substituted, non-dioxin-like congeners as well as some coplanar congeners. The relative contribution of each of these mechanisms to the loss of cognitive function in humans exposed to PCBs remains to be determined. 42 refs., 3 figs., 1 tab.

  5. Assessment of LANL PCB waste management documentation

    International Nuclear Information System (INIS)

    David, K.D.; Hoevemeyer, S.S.; Stirrup, T.S.; Jennrich, E.A.; Lund, D.M.

    1991-04-01

    The objective of this report is to present findings from evaluating the Los Alamos National Laboratory (LANL) Polychlorinated Biphenyls (PCB) Waste Acceptance Criteria (WAC) to determine if it meets applicable DOE and Code of Federal Regulation (CFR) requirements. DOE Order 5820.2A and 40 CFR 761 (Polychlorinated Biphenyls Manufacturing, Processing, Distribution in Commerce, and Use Prohibitions) set forth requirements and guidelines for the establishment of Waste Acceptance Criteria. The primary purpose of a PCB WAC is to provide generators and waste management with established criteria that must be met before PCB wastes can be accepted for treatment, storage, and/or disposal. An annotated outline for a generic PCB WAC was developed based on the requirements of 5820.2A and 40 CFR 761. The major elements that should be addressed by a PCB WAC were determined to be as follows: Waste Package/Container, Waste Forms, PCB Concentrations, Labeling, and Data Package Certification

  6. Recent changes in federal PCB regulations

    International Nuclear Information System (INIS)

    Ewing, H.

    1995-01-01

    An overview of the federal regulations dealing with PCBs, the draft PCB Transformer Decontamination Standards and Protocols, and the Practice of Ballast Splitting was given. Answers were provided to practical questions concerning the regulations, specifically, responsibility for storage, labelling requirements, waste export regulations, treatment and destruction standards, transformer decontamination, decontamination standards, and the practice of ballast splitting into PCB and non-PCB materials. Details of sampling procedures and sample handling were also described

  7. 1993 Annual PCB Document for Los Alamos National Laboratory EPA Region VI, January 1, 1993 through December 31, 1993

    International Nuclear Information System (INIS)

    Wechsler, R.J.; Sandoval, T.M.; Bryant, D.E.; Hupke, L.; Esquibel, L.

    1995-01-01

    This document, the open-quotes 1993 Annual PCB Document for Los Alamos National Laboratoryclose quotes was prepared to fulffill the requirements of the federal PCB (Polychlorinated Biphenyl) regulation: 40 CFR 761 Subpart J General Records and Reports. The PCB Management Program at Los Alamos National Laboratory (LANL), Environmental Protection Group, compiled this 1993 Annual PCB Document. The overall format generally follows the sequence of the applicable regulations. Subsection 1.2 cross references those regulatory requirements with the applicable Document Section. The scope of this document also includes status summaries of various aspects of LANL's PCB Management Program. The intent of this approach to the Annual Document is to provide an overview of LANL's PCB Management Program and to increase the usefulness of this document as a management tool. Section 2.0, open-quotes Status of the PCB Management Programclose quotes, discusses the use, generation of waste, and storage of PCBs at LANL. Section 3.0 is the 1993 Annual Document Log required by 761.180(a). This Section also discusses the PCB Management Program's policies for reporting under those regulatory requirements. Sections 4.0 and 5.0 contain the 1993 Annual Records for off-site and on-site disposal as required by 761.180(b). There is a tab for each manifest and its associated continuation sheets, receipt letters, and certificates of disposal

  8. A modeling approach to compare ΣPCB concentrations between congener-specific analyses

    Science.gov (United States)

    Gibson, Polly P.; Mills, Marc A.; Kraus, Johanna M.; Walters, David M.

    2017-01-01

    Changes in analytical methods over time pose problems for assessing long-term trends in environmental contamination by polychlorinated biphenyls (PCBs). Congener-specific analyses vary widely in the number and identity of the 209 distinct PCB chemical configurations (congeners) that are quantified, leading to inconsistencies among summed PCB concentrations (ΣPCB) reported by different studies. Here we present a modeling approach using linear regression to compare ΣPCB concentrations derived from different congener-specific analyses measuring different co-eluting groups. The approach can be used to develop a specific conversion model between any two sets of congener-specific analytical data from similar samples (similar matrix and geographic origin). We demonstrate the method by developing a conversion model for an example data set that includes data from two different analytical methods, a low resolution method quantifying 119 congeners and a high resolution method quantifying all 209 congeners. We used the model to show that the 119-congener set captured most (93%) of the total PCB concentration (i.e., Σ209PCB) in sediment and biological samples. ΣPCB concentrations estimated using the model closely matched measured values (mean relative percent difference = 9.6). General applications of the modeling approach include (a) generating comparable ΣPCB concentrations for samples that were analyzed for different congener sets; and (b) estimating the proportional contribution of different congener sets to ΣPCB. This approach may be especially valuable for enabling comparison of long-term remediation monitoring results even as analytical methods change over time. 

  9. 21 CFR 109.30 - Tolerances for polychlorinated biphenyls (PCB's).

    Science.gov (United States)

    2010-04-01

    ... Tolerances for polychlorinated biphenyls (PCB's). (a) Polychlorinated biphenyls (PCB's) are toxic, industrial chemicals. Because of their widespread, uncontrolled industrial applications, PCB's have become a persistent... unavoidable environmental or industrial contaminants are established for a sufficient period of time following...

  10. Automatic extraction of via in the CT image of PCB

    Science.gov (United States)

    Liu, Xifeng; Hu, Yuwei

    2018-04-01

    In modern industry, the nondestructive testing of printed circuit board (PCB) can prevent effectively the system failure and is becoming more and more important. In order to detect the via in the PCB base on the CT image automatically accurately and reliably, a novel algorithm for via extraction based on weighting stack combining the morphologic character of via is designed. Every slice data in the vertical direction of the PCB is superimposed to enhanced vias target. The OTSU algorithm is used to segment the slice image. OTSU algorithm of thresholding gray level images is efficient for separating an image into two classes where two types of fairly distinct classes exist in the image. Randomized Hough Transform was used to locate the region of via in the segmented binary image. Then the 3D reconstruction of via based on sequence slice images was done by volume rendering. The accuracy of via positioning and detecting from a CT images of PCB was demonstrated by proposed algorithm. It was found that the method is good in veracity and stability for detecting of via in three dimensional.

  11. PCB dechlorination in anaerobic soil slurry reactors

    International Nuclear Information System (INIS)

    Klasson, K.T.; Evans, B.S.

    1993-01-01

    Many industrial locations, including the US Department of Energy's, have identified needs for treatment of polychlorinated biphenyl (PCB) wastes and remediation of PCB-contaminated sites. Biodegradation of PCBs is a potentially effective technology for the treatment of PCB-contaminated soils and sludges, including mixed wastes; however, a practical remediation technology has not yet been demonstrated. In laboratory experiments, soil slurry bioreactors inoculated with microorganisms extracted from PCB-contaminated sediments from the Hudson River have been used to obtain anaerobic dechlorination of PCBS. The onset of dechlorination activity can be accelerated by addition of nutritional amendments and inducers. After 15 weeks of incubation with PCB-contaminated soil and nutrient solution, dechlorination has been observed under several working conditions. The best results show that the average chlorine content steadily dropped from 4.3 to 3.5 chlorines per biphenyl over a 15-week period

  12. Molecular interaction of PCB153 to human serum albumin: Insights from spectroscopic and molecular modeling studies

    Energy Technology Data Exchange (ETDEWEB)

    Han, Chao; Fang, Senbiao; Cao, Huiming; Lu, Yan; Ma, Yaqiong [School of Pharmacy, Lanzhou University, Lanzhou 730000 (China); Wei, Dongfeng [Institute of Basic Research in Clinical Medicine, China Academy of Chinese Medical Sciences, Beijing 100700 (China); Xie, Xiaoyun [College of Earth and Environmental Science, Lanzhou University, Lanzhou 730000 (China); Liu, Xiaohua [School of Pharmacy, Lanzhou University, Lanzhou 730000 (China); Li, Xin [College of Food and Bioengineering, Henan University of Science and Technology, Luoyang 471003 (China); Fei, Dongqing [School of Pharmacy, Lanzhou University, Lanzhou 730000 (China); Zhao, Chunyan, E-mail: zhaochy07@lzu.edu.cn [School of Pharmacy, Lanzhou University, Lanzhou 730000 (China)

    2013-03-15

    Highlights: ► We identify the binding mode of PCB153 to human serum albumin (HSA). ► Spectroscopic and molecular modeling results reveal that PCB153 binds at the site II. ► The interaction is mainly governed by hydrophobic and hydrogen bond forces. ► The work helps to probe transporting, distribution and toxicity effect of PCBs. -- Abstract: Polychlorinated biphenyls (PCBs) possessed much potential hazard to environment because of its chemical stability and biological toxicity. Here, we identified the binding mode of a representative compound, PCB153, to human serum albumin (HSA) using fluorescence and molecular dynamics simulation methods. The fluorescence study showed that the intrinsic fluorescence of HSA was quenched by addition of PCB153 through a static quenching mechanism. The thermodynamic analysis proved the binding behavior was mainly governed by hydrophobic force. Furthermore, as evidenced by site marker displacement experiments using two probe compounds, it revealed that PCB153 acted exactly on subdomain IIIA (site II) of HSA. On the other hand, the molecular dynamics studies as well as free energy calculations made another important contribution to understand the conformational changes of HSA and the stability of HSA-PCB153 system. Molecular docking revealed PCB153 can bind in a large hydrophobic activity of subdomain IIIA by the hydrophobic interaction and hydrogen bond interactions between chlorine atoms and residue ASN391. The present work provided reasonable models helping us further understand the transporting, distribution and toxicity effect of PCBs when it spread into human blood serum.

  13. Calculation methods in program CCRMN

    Energy Technology Data Exchange (ETDEWEB)

    Chonghai, Cai [Nankai Univ., Tianjin (China). Dept. of Physics; Qingbiao, Shen [Chinese Nuclear Data Center, Beijing, BJ (China)

    1996-06-01

    CCRMN is a program for calculating complex reactions of a medium-heavy nucleus with six light particles. In CCRMN, the incoming particles can be neutrons, protons, {sup 4}He, deuterons, tritons and {sup 3}He. the CCRMN code is constructed within the framework of the optical model, pre-equilibrium statistical theory based on the exciton model and the evaporation model. CCRMN is valid in 1{approx} MeV energy region, it can give correct results for optical model quantities and all kinds of reaction cross sections. This program has been applied in practical calculations and got reasonable results.

  14. PCB extraction from ORNL tank WC-14 using a unique solvent

    International Nuclear Information System (INIS)

    Bloom, G.A.; Lucero, A.J.; Koran, L.J.; Turner, E.N.

    1995-09-01

    This report summarizes the development work of the Engineering Development Section of the Chemical Technology Division at Oak Ridge National Laboratory (ORNL) for an organic extraction method for removing polychlorinated biphenyls (PCBs) from tank WC-14. Tank WC-14 is part of the ORNL liquid low-level radioactive tank waste system and does not meet new secondary containment and leak detection regulations. These regulations require the tank to be taken out of service, and remediated before tank removal. To remediate the tank, the PCBs must be removed; the tank contents can then be transferred to the Melton Valley Storage Tanks before final disposal. The solvent being used for the PCB extraction experiments is triethylamine, an aliphatic amine that is soluble in water below 60 degrees F but insoluble in water above 90 degrees F. This property will allow the extraction to be carried out under fully miscible conditions within the tank; then, after tank conditions have been changed, the solvent will not be miscible with water and phase separation will occur. Phase separation between sludge, water, and solvent will allow solvent (loaded with PCBs) to be removed from the tank for disposal. After removing the PCBs from the sludge and removing the sludge from the tank, administrative control of the tank can be transferred to ORNL's Environmental Restoration Program, where priorities will be set for tank removal. Experiments with WC-14 sludge show that greater than 90% extraction efficiencies can be achieved with one extraction stage and that PCB concentration in the sludge can be reduced to below 2 ppm in three extractions. It is anticipated that three extractions will be necessary to reduce the PCB concentration to below 2 ppm during field applications. The experiments conducted with tank WC-14 sludge transferred less than 0.03% of the original alpha contamination and less than 0.002% of the original beta contamination

  15. A Rational Method for Ranking Engineering Programs.

    Science.gov (United States)

    Glower, Donald D.

    1980-01-01

    Compares two methods for ranking academic programs, the opinion poll v examination of career successes of the program's alumni. For the latter, "Who's Who in Engineering" and levels of research funding provided data. Tables display resulting data and compare rankings by the two methods for chemical engineering and civil engineering. (CS)

  16. Response of PCB contamination in stream fish to abatement actions at an industrial site

    International Nuclear Information System (INIS)

    Southworth, G.R.; Peterson, M.J.; McCarthy, J.F.; Milne, G.

    1995-01-01

    The Paducah Gaseous Diffusion Plant (PGDP) in Paducah, Kentucky, used large quantities of PCBs in equipment associated with the great electric power requirements of isotopic enrichment of uranium. Historic losses of PCBs in the 1950s and 1960s have left a legacy of contamination at the site. A biological monitoring program implemented in 1987 found PCBs in PGDP effluents and in fish downstream from facility discharges. As a consequence, a fish consumption advisory was posted on Little Bayou Creek by the Commonwealth of Kentucky in 1987, and regulatory discharge limits for PCBs at PGDP were reduced. Monitoring at multiple locations in receiving streams indicated that PGDP discharges were more important than in stream sediment contamination as sources of PCBs to fish. Environmental management and compliance staff at PGDP led an effort to reduce PCB discharges and monitor the effects of those actions. The active discharge of uncontaminated process water to historically PCB-contaminated drainage systems was found to mobilize PCBs into KPDES (Clean Water Act) regulated effluents. Efforts to locate PCB sources within the plant, coupled with improvements in management practices and remedial actions, appear to have been successful in reducing PCB discharges from these sources. Actions included emplacing passive monitors in the plant drainage system to identify this as a chronic source, and consolidating and re-routing effluents to minimize flow through PCB-contaminated channels. As a consequence, PCB contamination in fish in small streams receiving plant discharges decreased 75% over from 1992--1995

  17. Neurolinguistics Programming: Method or Myth?

    Science.gov (United States)

    Gumm, W. B.; And Others

    1982-01-01

    The preferred modality by which 50 right-handed female college students encoded experience was assessed by recordings of conjugate eye movements, content analysis of the subject's verbal report, and the subject's self-report. Kappa analyses failed to reveal any agreement of the three assessment methods. (Author)

  18. Optimal production planning for PCB assembly

    CERN Document Server

    Ho, William

    2006-01-01

    Focuses on the optimization of the Printed circuit board (PCB) assembly lines' efficiency. This book integrates the component sequencing and the feeder arrangement problems together for the pick-and-place machine and the chip shooter machines.

  19. In situ application of activated carbon and biochar to PCB-contaminated soil and the effects of mixing regime

    International Nuclear Information System (INIS)

    Denyes, Mackenzie J.; Rutter, Allison; Zeeb, Barbara A.

    2013-01-01

    The in situ use of carbon amendments such as activated carbon (AC) and biochar to minimize the bioavailability of organic contaminants is gaining in popularity. In the first in situ experiment conducted at a Canadian PCB-contaminated Brownfield site, GAC and two types of biochar were statistically equal at reducing PCB uptake into plants. PCB concentrations in Cucurbita pepo root tissue were reduced by 74%, 72% and 64%, with the addition of 2.8% GAC, Burt's biochar and BlueLeaf biochar, respectively. A complementary greenhouse study which included a bioaccumulation study of Eisenia fetida (earthworm), found mechanically mixing carbon amendments with PCB-contaminated soil (i.e. 24 h at 30 rpm) resulted in shoot, root and worm PCB concentrations 66%, 59% and 39% lower than in the manually mixed treatments (i.e. with a spade and bucket). Therefore, studies which mechanically mix carbon amendments with contaminated soil may over-estimate the short-term potential to reduce PCB bioavailability. Highlights: •Biochar and GAC reduced PCB uptake into plants and earthworms. •Biochar offered additional benefits, including increased plant and earthworm biomass. •BSAF reductions are greater when amendments are mechanically vs. manually mixed. •Mechanically mixing carbon amendments may over-estimate their remediation potential. -- In situ AC and biochar soil amendments perform equally well at reducing PCB uptake, however, laboratory-based mixing methods may exaggerate the sorptive capacities of both amendments

  20. Developmental Exposure to an Environmental PCB Mixture ...

    Science.gov (United States)

    Developmental PCB exposure impairs hearing and induces brainstem audiogenic seizures in adult offspring. The degree to which this enhanced susceptibility to seizure is manifest in other brain regions has not been examined. Thus, electrical kindling of the amygdala was used to evaluate the effect of developmental exposure to an environmentally relevant PCB mixture on seizure susceptibility in the rat. Female Long-Evans rats were dosed orally with 0 or 6 mg/kg/day of the PCB mixture dissolved in corn oil vehicle during the perinatal period. On postnatal day (PND) 21, pups were weaned, and two males from each litter were randomly selected for the kindling study. As adults, the male rats were implanted bilaterally with electrodes in the basolateral amygdala. For each animal, afterdischarge (AD) thresholds in the amygdala were determined on the first day of testing followed by once daily stimulation at a standard 200 µA stimulus intensity until three stage 5 generalized seizures (GS) ensued. Developmental PCB exposure did not affect the AD threshold or total cumulative AD duration, but PCB exposure did increase the latency to behavioral manifestations of seizure propagation. PCB exposed animals required significantly more stimulations to reach stage 2 seizures compared to control animals, indicating an attenuated focal (amygdala) excitability. A delay in kindling progression from a focally stimulated limbic site stands in contrast to our previous finding of increase

  1. Insight in the PCB-degrading functional community in long-term contaminated soil under bioremediation

    Energy Technology Data Exchange (ETDEWEB)

    Petric, Ines; Hrsak, Dubravka; Udikovic-Kolic, Nikolina [Ruder Boskovic Inst., Division for Marine and Environmental Research, Zagreb (Croatia); Fingler, Sanja [Inst. for Medical Research and Occupational Health, Zagreb (Croatia); Bru, David; Martin-Laurent, Fabrice [INRA, Univ. der Bourgogne, Soil and Environmental Microbiology, Dijon (France)

    2011-02-15

    A small-scale bioremediation assay was developed in order to get insight into the functioning of a polychlorinated biphenyl (PCB) degrading community during the time course of bioremediation treatment of a contaminated soil. The study was conducted with the aim to better understand the key mechanisms involved in PCB-removal from soils. Materials and methods Two bioremediation strategies were applied in the assay: (a) biostimulation (addition of carvone as inducer of biphenyl pathway, soya lecithin for improving PCB bioavailability, and xylose as supplemental carbon source) and (b) bioaugmentation with selected seed cultures TSZ7 or Rhodococcus sp. Z6 originating from the transformer station soil and showing substantial PCB-degrading activity. Functional PCB-degrading community was investigated by using molecular-based approaches (sequencing, qPCR) targeting bphA and bphC genes, coding key enzymes of the upper biphenyl pathway, in soil DNA extracts. In addition, kinetics of PCBs removal during the bioremediation treatment was determined using gas chromatography mass spectrometry analyses. Results and discussion bphA-based phylogeny revealed that bioremediation affected the structure of the PCB-degrading community in soils, with Rhodococcus-like bacterial populations developing as dominant members. Tracking of this population further indicated that applied bioremediation treatments led to its enrichment within the PCB-degrading community. The abundance of the PCB-degrading community, estimated by quantifying the copy number of bphA and bphC genes, revealed that it represented up to 0.3% of the total bacterial community. All bioremediation treatments were shown to enhance PCB reduction in soils, with approximately 40% of total PCBs being removed during a 1-year period. The faster PCB reduction achieved in bioaugmented soils suggested an important role of the seed cultures in bioremediation processes. Conclusions The PCBs degrading community was modified in response to

  2. Simple Calculation Programs for Biology Immunological Methods

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Simple Calculation Programs for Biology Immunological Methods. Computation of Ab/Ag Concentration from EISA data. Graphical Method; Raghava et al., 1992, J. Immuno. Methods 153: 263. Determination of affinity of Monoclonal Antibody. Using non-competitive ...

  3. Investigating Intergenerational Differences in Human PCB Exposure due to Variable Emissions and Reproductive Behaviors

    Science.gov (United States)

    Quinn, Cristina L.; Wania, Frank; Czub, Gertje; Breivik, Knut

    2011-01-01

    Background Reproductive behaviors—such as age of childbearing, parity, and breast-feeding prevalence—have changed over the same historical time period as emissions of polychlorinated biphenyls (PCB) and may produce intergenerational differences in human PCB exposure. Objectives Our goal in this study was to estimate prenatal, postnatal, and lifetime PCB exposures for women at different ages according to year of birth, and to evaluate the impact of reproductive characteristics on intergenerational differences in exposure. Methods We used the time-variant mechanistic model CoZMoMAN to calculate human bioaccumulation of PCBs, assuming both hypothetical constant and realistic time-variant emissions. Results Although exposure primarily depends on when an individual was born relative to the emission history of PCBs, reproductive behaviors can have a significant impact. Our model suggests that a mother’s reproductive history has a greater influence on the prenatal and postnatal exposures of her children than it does on her own cumulative lifetime exposure. In particular, a child’s birth order appears to have a strong influence on their prenatal exposure, whereas postnatal exposure is determined by the type of milk (formula or breast milk) fed to the infant. Conclusions Prenatal PCB exposure appears to be delayed relative to the time of PCB emissions, particularly among those born after the PCB production phaseout. Consequently, the health repercussions of environmental PCBs can be expected to persist for several decades, despite bans on their production for > 40 years. PMID:21156396

  4. Method for programming a flash memory

    Energy Technology Data Exchange (ETDEWEB)

    Brosky, Alexander R.; Locke, William N.; Maher, Conrado M.

    2016-08-23

    A method of programming a flash memory is described. The method includes partitioning a flash memory into a first group having a first level of write-protection, a second group having a second level of write-protection, and a third group having a third level of write-protection. The write-protection of the second and third groups is disabled using an installation adapter. The third group is programmed using a Software Installation Device.

  5. Discount method for programming language evaluation

    DEFF Research Database (Denmark)

    Kurtev, Svetomir; Christensen, Tommy Aagaard; Thomsen, Bent

    2016-01-01

    This paper presents work in progress on developing a Discount Method for Programming Language Evaluation inspired by the Discount Usability Evaluation method (Benyon 2010) and the Instant Data Analysis method (Kjeldskov et al. 2004). The method is intended to bridge the gap between small scale...... internal language design evaluation methods and large scale surveys and quantitative evaluation methods. The method is designed to be applicable even before a compiler or IDE is developed for a new language. To test the method, a usability evaluation experiment was carried out on the Quorum programming...... language (Stefik et al. 2016) using programmers with experience in C and C#. When comparing our results with previous studies of Quorum, most of the data was comparable though not strictly in agreement. However, the discrepancies were mainly related to the programmers pre-existing expectations...

  6. PCB and Dioxin content of Swedish waste fuels; PCB- och dioxininnehaall i svenska avfallsbraenslen

    Energy Technology Data Exchange (ETDEWEB)

    Blomqvist, Evalena (Swedish National Testing and Research Inst., Boraas (Sweden)) (and others)

    2009-06-15

    Reported dioxin data in the literature presents a rather large variation, 1-255 ng I-TEQ/kg, among different municipal solid waste (MSW) mixture samples taken within different countries. However the variation is not only large between different countries, a significant variation is reported within each study as well. Results that shows the importance of using reliable and representative sampling methods. The majority of the reported dioxin levels is within 4 to 45 ng I-TEQ/kg waste. In some of the reported studies the dioxin content has as well been analysed in sources-sorted fractions. The majority, 90-95%, of the detected dioxins were found in the fraction consisting of textiles and leather. This study aims to analyse the amount and variations, of the toxic dioxin and PCB congeners within a typical MSW mixture in Sweden, before it is energy recovered in a waste incineration plant. The study includes 20 samples, taken from two different plants in Sweden i.e. Renova and Boraas Energi och Miljoe, during 2007/2008. A well evaluated sampling method were used at both plants to achieve representative samples. Each sampling campaign resulted in a 30 kg sample that was transported in sealed containers to a laboratory. The heat value and a complete determination of the elementary content was analysed as well as the levels of toxic dioxins and PCBs in all samples. All results, both organic and inorganic, were rather similar between the two incineration plants. The resemblance within the results is an outcome of that good and representative sampling method has been used during the sampling campaigns. The average value (+/- standard deviation) of all 20 samples is 29 +/-15 ng I-TEQ per kilo of dry MSW. An average value which is within the lower range of the previous reported levels in the literature. The lower dioxin content within Swedish MSW mixtures is most likely due to the relative well-controlled waste management and sorting system in Sweden. The majority of the

  7. Methods for evaluation of industry training programs

    International Nuclear Information System (INIS)

    Morisseau, D.S.; Roe, M.L.; Persensky, J.J.

    1987-01-01

    The NRC Policy Statement on Training and Qualification endorses the INPO-managed Training Accreditation Program in that it encompasses the elements of effective performance-based training. Those elements are: analysis of the job, performance-based learning objectives, training design and implementation, trainee evaluation, and program evaluation. As part of the NRC independent evaluation of utilities implementation of training improvement programs, the staff developed training review criteria and procedures that address all five elements of effective performance-based training. The staff uses these criteria to perform reviews of utility training programs that have already received accreditation. Although no performance-based training program can be said to be complete unless all five elements are in place, the last two, trainee and program evaluation, are perhaps the most important because they determine how well the first three elements have been implemented and ensure the dynamic nature of training. This paper discusses the evaluation elements of the NRC training review criteria. The discussion will detail the elements of evaluation methods and techniques that the staff expects to find as integral parts of performance-based training programs at accredited utilities. Further, the review of the effectiveness of implementation of the evaluation methods is discussed. The paper also addresses some of the qualitative differences between what is minimally acceptable and what is most desirable with respect to trainee and program evaluation mechanisms and their implementation

  8. Simple Calculation Programs for Biology Other Methods

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Simple Calculation Programs for Biology Other Methods. Hemolytic potency of drugs. Raghava et al., (1994) Biotechniques 17: 1148. FPMAP: methods for classification and identification of microorganisms 16SrRNA. graphical display of restriction and fragment map of ...

  9. Sparsity Prevention Pivoting Method for Linear Programming

    DEFF Research Database (Denmark)

    Li, Peiqiang; Li, Qiyuan; Li, Canbing

    2018-01-01

    When the simplex algorithm is used to calculate a linear programming problem, if the matrix is a sparse matrix, it will be possible to lead to many zero-length calculation steps, and even iterative cycle will appear. To deal with the problem, a new pivoting method is proposed in this paper....... The principle of this method is avoided choosing the row which the value of the element in the b vector is zero as the row of the pivot element to make the matrix in linear programming density and ensure that most subsequent steps will improve the value of the objective function. One step following...... this principle is inserted to reselect the pivot element in the existing linear programming algorithm. Both the conditions for inserting this step and the maximum number of allowed insertion steps are determined. In the case study, taking several numbers of linear programming problems as examples, the results...

  10. Sparsity Prevention Pivoting Method for Linear Programming

    DEFF Research Database (Denmark)

    Li, Peiqiang; Li, Qiyuan; Li, Canbing

    2018-01-01

    . The principle of this method is avoided choosing the row which the value of the element in the b vector is zero as the row of the pivot element to make the matrix in linear programming density and ensure that most subsequent steps will improve the value of the objective function. One step following......When the simplex algorithm is used to calculate a linear programming problem, if the matrix is a sparse matrix, it will be possible to lead to many zero-length calculation steps, and even iterative cycle will appear. To deal with the problem, a new pivoting method is proposed in this paper...... this principle is inserted to reselect the pivot element in the existing linear programming algorithm. Both the conditions for inserting this step and the maximum number of allowed insertion steps are determined. In the case study, taking several numbers of linear programming problems as examples, the results...

  11. Laboratory Study of Polychlorinated Biphenyl (PCB) Contamination and Mitigation in Buildings -- Part 4. Evaluation of the Activated Metal Treatment System (AMTS) for On-site Destruction of PCBs

    Science.gov (United States)

    This is the fourth, also the last, report of the report series entitled “Laboratory Study of Polychlorinated Biphenyl (PCB) Contamination and Mitigation in Buildings.” This report evaluates the performance of an on-site PCB destruction method, known as the AMTS method, developed ...

  12. Cadence® High-Speed PCB Layout Flow Workshop

    CERN Document Server

    2003-01-01

    Last release of Cadence High-Speed PCB Design methodology (PE142) based on Concept-HDL schematic editor, Constraint Manager, SPECCTRAQuest signal integrity analysis tool and ALLEGRO layout associated with SPECCTRA auto router tools, is now enough developed and stable to be taken into account for high-speed board designs at CERN. The implementation of this methodology, build around the new Constraint Manager program, is essential when you have to develop a board having a lot of high-speed design rules such as terminated lines, large bus structures, maximum length, timing, crosstalk etc.. that could not be under control by traditional method. On more conventional designs, formal aspect of the methodology could avoid misunderstanding between hardware and ALLEGRO layout designers, minimizing prototype iteration, development time and price. The capability to keep trace of the original digital designer intents in schematic or board layout, loading formal constraints in EDMS, could also be considered for LHC electro...

  13. Cadence® High High-Speed PCB Design Flow Workshop

    CERN Document Server

    2006-01-01

    Last release of Cadence High-Speed PCB Design methodology (PE142) based on Concept-HDL schematic editor, Constraint Manager, SPECCTRAQuest signal integrity analysis tool and ALLEGRO layout associated with SPECCTRA auto router tools, is now enough developed and stable to be taken into account for high-speed board designs at CERN. The implementation of this methodology, build around the new Constraint Manager program, is essential when you have to develop a board having a lot of high-speed design rules such as terminated lines, large bus structures, maximum length, timing, crosstalk etc.. that could not be under control by traditional method. On more conventional designs, formal aspect of the methodology could avoid misunderstanding between hardware and ALLEGRO layout designers, minimizing prototype iteration, development time and price. The capability to keep trace of the original digital designer intents in schematic or board layout, loading formal constraints in EDMS, could also be considered for LHC electro...

  14. PCB congener concentrations in a municipal sewer system in New Jersey, USA

    Energy Technology Data Exchange (ETDEWEB)

    Loganathan, B. [Murray State Univ., Murray, KY (United States); Botts, J.A. [Aquatic Sciences Consulting, Woodbine, MD (United States); Spadone, J.; McKenna, B. [Linden Roselle Sewerage Authority, Linden, NJ (United States); Sajwan, K.S. [Savannah State Univ., Savannah, GA (United States)

    2005-07-01

    This paper provided details of a water sampling pilot study conducted in the Linden Roselle Sewerage Authority (LRSA) region in New Jersey. The pilot study was conducted as part of a polychlorinated biphenyl (PCB) monitoring program. Total PCB concentrations in whole water samples in both dissolved and particulate phases were collected at selected locations in the LRSA. PCB loading estimates for dry weather were also provided. Automatic composite sampler equipped with peristaltic pump mechanisms were used to collect the samples in a series of 4 rounds. Sample extracts were then purified and analyzed using a gas chromatograph electron capture detector (GC-ECD). Results showed that in dry weather, total PCBs were between 2.6 to 6.0-fold higher in the western sampling area than in the Roselle Flue, which received sewage flows from residential and commercial sources in the northwest area of the LRSA. Wet weather samples showed only slightly higher total PCBs. Data indicated a source of PCBs in the western portion of the sewershed. In dry weather, higher PCB levels were found in the whole primary influent samples. It was concluded that increased PCB levels were attributed to grit and sludge processing waste streams within a waste water treatment plant. 8 refs., 2 tabs.

  15. PCB-Caulk Replacement Project Johnson Space Center Houston, TX

    Science.gov (United States)

    Young, William M.; Stanch, Penney M.; Molenda, William

    2011-01-01

    Wet method reduced exposure by minimizing overall respirable particulate release. Dry method didn't introduce delays for primer/caulk application. Removed caulks came in many forms, from dry powdery to tarry sticky. Varying textures were not sampled or packaged differently. During the course of the project, EPA modified recommended practices to include full containment for exterior caulk removal. Changes are ongoing. Initial recommendations were directed to school buildings. EPA is researching risks due to caulk. Exposure guidance lacking except for 2 of 209 PCB congeners. Work was safely completed on schedule and under budget.

  16. Serum PCB profiles in Native Americans from Wisconsin based on region, diet, age, and gender: Implications for epidemiology studies

    International Nuclear Information System (INIS)

    Schaeffer, David J.; Dellinger, John A.; Needham, Larry L.; Hansen, Larry G.

    2006-01-01

    Background: Different PCB congeners and different mixtures of congeners have been demonstrated to have different biological actions. More complete characterization of congener profiles in exposure sources may assist in predicting health outcomes. Methods: Thirty-six (36) polychlorinated biphenyl (PCB) congeners were measured by gas chromatography isotope-dilution mass spectrometry (IDMS) in 314 serum samples from Native Americans in Wisconsin, Michigan and Minnesota. Five dietary groups were established based on the quantity and species of fish consumed and the waters from which the fish were caught. Multivariate statistical methods were able to resolve gender and dietary differences in PCB homologue and PCB congener patterns. Results: Females had higher proportions of lower chlorinated homologues, including a consistently higher proportion of pentaCB 118. The relative presence of the very labile and volatile PCB 18, above 1% of the total PCB in females from the minimal fish consumption and 'other' groups, suggests possible exposure to PCBs in the atmosphere. The dietary group consuming predatory fishes from Lakes Michigan and Superior had the highest serum concentrations of total PCB (mean of 3.1 ng/ml) and the most distinct congener profile. The two dietary groups least dependent on fishing or fishing mostly from inland lakes (non-Great Lakes) had the lowest total PCB concentrations, both with means of 1.4 ng/ml. Conclusions: These serum PCB concentrations were less than those found in earlier studies of fish consumers in the Great Lakes region and may reflect the decrease in PCBs in these lakes

  17. 40 CFR 761.269 - Sampling liquid PCB remediation waste.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Sampling liquid PCB remediation waste..., AND USE PROHIBITIONS Cleanup Site Characterization Sampling for PCB Remediation Waste in Accordance with § 761.61(a)(2) § 761.269 Sampling liquid PCB remediation waste. (a) If the liquid is single phase...

  18. 40 CFR 761.61 - PCB remediation waste.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false PCB remediation waste. 761.61 Section... PROHIBITIONS Storage and Disposal § 761.61 PCB remediation waste. This section provides cleanup and disposal options for PCB remediation waste. Any person cleaning up and disposing of PCBs managed under this section...

  19. Evaluation of PCB sources and releases for identifying priorities to reduce PCBs in Washington State (USA).

    Science.gov (United States)

    Davies, Holly; Delistraty, Damon

    2016-02-01

    Polychlorinated biphenyls (PCBs) are ubiquitously distributed in the environment and produce multiple adverse effects in humans and wildlife. As a result, the purpose of our study was to characterize PCB sources in anthropogenic materials and releases to the environment in Washington State (USA) in order to formulate recommendations to reduce PCB exposures. Methods included review of relevant publications (e.g., open literature, industry studies and reports, federal and state government databases), scaling of PCB sources from national or county estimates to state estimates, and communication with industry associations and private and public utilities. Recognizing high associated uncertainty due to incomplete data, we strived to provide central tendency estimates for PCB sources. In terms of mass (high to low), PCB sources include lamp ballasts, caulk, small capacitors, large capacitors, and transformers. For perspective, these sources (200,000-500,000 kg) overwhelm PCBs estimated to reside in the Puget Sound ecosystem (1500 kg). Annual releases of PCBs to the environment (high to low) are attributed to lamp ballasts (400-1500 kg), inadvertent generation by industrial processes (900 kg), caulk (160 kg), small capacitors (3-150 kg), large capacitors (10-80 kg), pigments and dyes (0.02-31 kg), and transformers (PCB distribution and decrease exposures include assessment of PCBs in buildings (e.g., schools) and replacement of these materials, development of Best Management Practices (BMPs) to contain PCBs, reduction of inadvertent generation of PCBs in consumer products, expansion of environmental monitoring and public education, and research to identify specific PCB congener profiles in human tissues.

  20. Bioremediation trial on aged PCB-polluted soils--a bench study in Iceland.

    Science.gov (United States)

    Lehtinen, Taru; Mikkonen, Anu; Sigfusson, Bergur; Ólafsdóttir, Kristín; Ragnarsdóttir, Kristín Vala; Guicharnaud, Rannveig

    2014-02-01

    Polychlorinated biphenyls (PCBs) pose a threat to the environment due to their high adsorption capacity to soil organic matter, stability and low reactivity, low water solubility, toxicity and ability to bioaccumulate. With Icelandic soils, research on contamination issues has been very limited and no data has been reported either on PCB degradation potential or rate. The goals of this research were to assess the bioavailability of aged PCBs in the soils of the old North Atlantic Treaty Organization facility in Keflavík, Iceland and to find the best biostimulation method to decrease the pollution. The effectiveness of different biostimulation additives (N fertiliser, white clover and pine needles) at different temperatures (10 and 30 °C) and oxygen levels (aerobic and anaerobic) were tested. PCB bioavailability to soil fauna was assessed with earthworms (Eisenia foetida). PCBs were bioavailable to earthworms (bioaccumulation factor 0.89 and 0.82 for earthworms in 12.5 ppm PCB soil and in 25 ppm PCB soil, respectively), with less chlorinated congeners showing higher bioaccumulation factors than highly chlorinated congeners. Biostimulation with pine needles at 10 °C under aerobic conditions resulted in nearly 38 % degradation of total PCBs after 2 months of incubation. Detection of the aerobic PCB degrading bphA gene supports the indigenous capability of the soils to aerobically degrade PCBs. Further research on field scale biostimulation trials with pine needles in cold environments is recommended in order to optimise the method for onsite remediation.

  1. Kwantificatie van PCB-componenten in krachtvoeders

    NARCIS (Netherlands)

    Mazijk, van R.J.; Munsteren, van A.J.; Tuinstra, L.G.M.Th.

    1981-01-01

    Met behulp van individuele chloorbifenylstandaarden is het PCB-gehalte van een aantal krachtvoeders bepaald, waarbij voor de onbekende componenten een geschatte waarde is gebruikt. Uit deze gehalten is met behulp van omrekeningsfactoren de theoretische DCB-opbrengst bij perchloreren berekend. Dit

  2. Integrated Nanozero Valent Iron and Biosurfactant-Aided Remediation of PCB-Contaminated Soil

    Directory of Open Access Journals (Sweden)

    He Zhang

    2016-01-01

    Full Text Available Polychlorobiphenyls (PCBs have been identified as environmental hazards for years. Due to historical issues, a considerable amount of PCBs was released deep underground in Canada. In this research, a nanoscale zero valent iron- (nZVI- aided dechlorination followed by biosurfactant enhanced soil washing method was developed to remove PCBs from soil. During nZVI-aided dechlorination, the effects of nZVI dosage, initial pH level, and temperature were evaluated, respectively. Five levels of nZVI dosage and two levels of initial pH were experimented to evaluate the PCB dechlorination rate. Additionally, the temperature changes could positively influence the dechlorination process. In soil washing, the presence of nanoiron particles played a key role in PCB removal. The crude biosurfactant was produced using a bacterial stain isolated from the Atlantic Ocean and was applied for soil washing. The study has led to a promising technology for PCB-contaminated soil remediation.

  3. Associations between plasma concentrations of PCB 28 and possible indoor exposure sources in Danish school children and mothers

    DEFF Research Database (Denmark)

    Egsmose, Emilie Lund; Bräuner, Elvira Vaclavik; Frederiksen, Marie

    2016-01-01

    Background: Polychlorinated biphenyls (PCBs) are ubiquitously present in the environment and are suspected ofcarcinogenic, neurotoxic and immunotoxic effects. Significantly higher plasma concentrations of the congener PCB 28 occur in children compared to adults. Exposure in schools may contribute...... to this difference. Objective: To determine whether increased blood plasma concentrations of PCB 28 in Danish school children andmothers are associated with living in homes or attending schools constructed in the PCB period (1959–1977). Methods: PCB 28 was analyzed in plasma samples from 116 children aged 6–11 years...... and 143 mothers living inan urban and a rural area in Denmark and participating in the European pilot project DEMOCOPHES (Demonstrationof a study to COordinate and Perform Human Biomonitoring on a European Scale). In Denmark, PCBs wereused in construction in the period 1950–1977, and year of construction...

  4. Programming by Numbers -- A Programming Method for Complete Novices

    NARCIS (Netherlands)

    Glaser, Hugh; Hartel, Pieter H.

    2000-01-01

    Students often have difficulty with the minutiae of program construction. We introduce the idea of `Programming by Numbers', which breaks some of the programming process down into smaller steps, giving such students a way into the process of Programming in the Small. Programming by Numbers does not

  5. PCB concentrations of lake whitefish (Coregonus clupeaformis) vary by sex

    Science.gov (United States)

    Madenjian, Charles P.; Ebener, Mark P.; Sepulveda, Maria S.

    2015-01-01

    We determined whole-fish polychlorinated biphenyl (PCB) concentrations in 26 female lake whitefish (Coregonus clupeaformis) and 34 male lake whitefish from northern Lake Huron. In 5 of the 26 female lake whitefish, we also determined PCB concentrations in the somatic tissue and ovaries. In addition, bioenergetics modeling was used to determine the contribution of the growth dilution effect to the observed difference in PCB concentrations between the sexes. Whole-fish PCB concentrations for females and males averaged 60 ng/g and 80 ng/g, respectively; thus males were 34% higher in PCB concentration compared with females. Based on the PCB determinations in the somatic tissue and ovaries, we predicted that PCB concentration of females would increase by 2.5%, on average, immediately after spawning due to release of eggs. Thus, the change in PCB concentration due to release of eggs did not explain, to any degree, the higher PCB concentrations observed in males compared with females. Bioenergetics modeling results indicated that the growth dilution effect could account for males being only 0.7% higher in PCB concentration compared with females. Thus, the growth dilution effect contributed very little to the observed difference in PCB concentrations between the sexes. We conclude that males were higher than females in PCB concentration most likely due to a higher rate of energy expenditure, stemming from greater activity and a greater resting metabolic rate. A higher rate of energy expenditure leads to a higher rate of food consumption, which, in turn, leads to a higher PCB accumulation rate.

  6. PCB-Based Break-Out Box

    Science.gov (United States)

    Lee, Jason H.

    2011-01-01

    Break-out boxes (BOBs) are necessary for all electrical integration/cable checkouts and troubleshooting. Because the price of a BOB is high, and no work can be done without one, often the procedure stops, simply waiting for a BOB. A less expensive BOB would take less time in the integration, testing, and troubleshooting process. The PCB-based BOB works and looks the same as a standard JPL BOB, called Gold Boxes. The only differences between the old BOB and the new PCB-based BOB is that the new one has 80 percent of its circuitry in a printed circuit board. This process reduces the time for fabrication, thus making the BOBs less expensive. Moreover, because of its unique design, the new BOBs can be easily assembled and fixed. About 80 percent of the new PCB-based BOB is in a $22 (at the time of this reporting) custom-designed, yet commercially available PCB. This device has been used successfully to verify that BOB cables were properly made. Also, upon completion, the BOB was beeped out via a multimeter to ensure that all sockets on the connectors were properly connected to the respective banana jack. When compared to the Gold Box BOBs, the new BOB has many advantages. It is much more cost efficient, it delivers equal usability at substantially lower cost of the BOB, and the Gold Box is much heavier when compared to the new BOB. The new BOB is also a bit longer and much more versatile in that connectors are easily changeable and if a banana jack is broken, it can be replaced instead of throwing away an entire BOB.

  7. The simplex method of linear programming

    CERN Document Server

    Ficken, Frederick A

    1961-01-01

    This concise but detailed and thorough treatment discusses the rudiments of the well-known simplex method for solving optimization problems in linear programming. Geared toward undergraduate students, the approach offers sufficient material for readers without a strong background in linear algebra. Many different kinds of problems further enrich the presentation. The text begins with examinations of the allocation problem, matrix notation for dual problems, feasibility, and theorems on duality and existence. Subsequent chapters address convex sets and boundedness, the prepared problem and boun

  8. Machine Vision Implementation in Rapid PCB Prototyping

    Directory of Open Access Journals (Sweden)

    Yosafat Surya Murijanto

    2012-03-01

    Full Text Available Image processing, the heart of machine vision, has proven itself to be an essential part of the industries today. Its application has opened new doorways, making more concepts in manufacturing processes viable. This paper presents an application of machine vision in designing a module with the ability to extract drills and route coordinates from an un-mounted or mounted printed circuit board (PCB. The algorithm comprises pre-capturing processes, image segmentation and filtering, edge and contour detection, coordinate extraction, and G-code creation. OpenCV libraries and Qt IDE are the main tools used. Throughout some testing and experiments, it is concluded that the algorithm is able to deliver acceptable results. The drilling and routing coordinate extraction algorithm can extract in average 90% and 82% of the whole drills and routes available on the scanned PCB in a total processing time of less than 3 seconds. This is achievable through proper lighting condition, good PCB surface condition and good webcam quality. 

  9. Carcinogenicity/tumour promotion by NDL PCB

    Energy Technology Data Exchange (ETDEWEB)

    Schrenk, D. [Kaiserslautern Univ. (Germany). Food Chemistry and Environmental Toxicology

    2004-09-15

    Polychlorinated biphenyls (PCBs) belong to the group of persistent environmental pollutants exhibiting neurotoxic, teratogenic and tumour-promoting effects in experimental animal models. PCB congeners can be divided into 'dioxinlike' and 'non-dioxinlike' congeners on the basis of their ability to act as aryl hydrocarbon receptor (AhR) agonists. Like the most toxic dioxin congener 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) 'dioxinlike' PCBs bind to the AhR and show characteristic effects on the expression of AhR-regulated genes including the induction of cytochrome P450 (CYP) 1A1. On the other hand, 'non-dioxinlike' PCB congeners have a lower or no binding affinity to the AhR, but exhibit a 'phenobarbital-type' induction of CYP 2B1/2 activity. A carcinogenic potential of PCBs has been demonstrated with technical mixtures such as Aroclors or Clophens. In these studies the liver and the thyroid gland were found to be the principal target organs of PCB-mediated carcinogenesis in rodents. No studies have been published, however, on the carcinogenicity of individual congeners. In two-stage initiation-promotion protocols in rats, both technical mixtures and individual 'dioxinlike' and 'non-dioxinlike' congeners were reported to act as liver tumour promoters.

  10. A highly sensitive and selective aptamer-based colorimetric sensor for the rapid detection of PCB 77.

    Science.gov (United States)

    Cheng, Ruojie; Liu, Siyao; Shi, Huijie; Zhao, Guohua

    2018-01-05

    A highly sensitive, specific and simple colorimetric sensor based on aptamer was established for the detection of polychlorinated biphenyls (PCB 77). The use of unmodified gold nanoparticles as a colorimetric probe for aptamer sensors enabled the highly sensitive and selective detection of polychlorinated biphenyls (PCB 77). A linear range of 0.5nM to 900nM was obtained for the colorimetric assay with a minimum detection limit of 0.05nM. In addition, by the methods of circular dichroism, UV and naked eyes, we found that the 35 base fragments retained after cutting 5 bases from the 5 'end of aptamer plays the most significant role in the PCB 77 specific recognition process. We found a novel way to truncated nucleotides to optimize the detection of PCB 77, and the selected nucleotides also could achieve high affinity with PCB 77. At the same time, the efficient detection of the PCB 77 by our colorimetric sensor in the complex environmental water samples was realized, which shows a good application prospect. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. PCB i bygninger - afhjælpning, renovering og nedrivning

    DEFF Research Database (Denmark)

    Andersen, Helle Vibeke

    SBi-anvisning 268 beskriver, hvordan PCB-forurening af indeluften afhjælpes, og hvordan PCB håndteres, når man renoverer eller nedriver bygninger med PCB. Uanset om der er tale om afhjælpning, renovering eller nedrivning, kan arbejdet generere PCB-holdigt affald. Anvisningen forklarer derfor......, hvordan affaldet skal håndteres, og hvordan man beskytter mennesker og miljø under arbejdet. Anvisningen er baseret på byggebranchens erfaringer og den aktuelle forskningsbaserede viden om PCB i bygninger. SBi-anvisning 268 afløser den snart fire år gamle SBi-anvisning 242 om renovering af bygninger med...... PCB, som ikke behandlede spørgsmålet om affaldshåndtering....

  12. Inspection of power and ground layers in PCB images

    Science.gov (United States)

    Bunyak, Filiz; Ercal, Fikret

    1998-10-01

    In this work, we present an inspection method for power and ground (P&G) layers of printed circuit boards (PCB) also called utility layers. Design considerations for the P&G layers are different than those of signal layers. Current PCB inspection approaches cannot be applied to these layers. P&G layers act as internal ground, neutral or power sources. P&G layers are predominantly copper with occasional pad areas (without copper) called clearance. Defect definition is based on the spacing between the holes that will be drilled in clearances and the surrounding copper. Overlap of pads of different sizes and shapes are allowed. This results in complex, hard to inspect clearances. Our inspection is based on identification of shape, size and position of the individual pads that contribute to an overlapping clearance and then inspection of each pad based on design rules and tolerances. Main steps of our algorithm are as follows: (1) extraction and preprocessing of clearance contours; (2) decomposition of contours into segments: corner detection and matching lines or circular arcs between two corners; (3) determination of the pads from partial contour information obtained in step (2), and (4) design rules checking for each detected pad.

  13. Evaluation of cumulative PCB exposure estimated by a job exposure matrix versus PCB serum concentrations

    Science.gov (United States)

    Ruder, Avima M.; Succop, Paul; Waters, Martha A.

    2015-01-01

    Although polychlorinated biphenyls (PCBs) have been banned in many countries for more than three decades, exposures to PCBs continue to be of concern due to their long half-lives and carcinogenic effects. In National Institute for Occupational Safety and Health studies, we are using semiquantitative plant-specific job exposure matrices (JEMs) to estimate historical PCB exposures for workers (n=24,865) exposed to PCBs from 1938 to 1978 at three capacitor manufacturing plants. A subcohort of these workers (n=410) employed in two of these plants had serum PCB concentrations measured at up to four times between 1976 and 1989. Our objectives were to evaluate the strength of association between an individual worker’s measured serum PCB levels and the same worker’s cumulative exposure estimated through 1977 with the (1) JEM and (2) duration of employment, and to calculate the explained variance the JEM provides for serum PCB levels using (3) simple linear regression. Consistent strong and statistically significant associations were observed between the cumulative exposures estimated with the JEM and serum PCB concentrations for all years. The strength of association between duration of employment and serum PCBs was good for highly chlorinated (Aroclor 1254/HPCB) but not less chlorinated (Aroclor 1242/LPCB) PCBs. In the simple regression models, cumulative occupational exposure estimated using the JEMs explained 14–24 % of the variance of the Aroclor 1242/LPCB and 22–39 % for Aroclor 1254/HPCB serum concentrations. We regard the cumulative exposure estimated with the JEM as a better estimate of PCB body burdens than serum concentrations quantified as Aroclor 1242/LPCB and Aroclor 1254/HPCB. PMID:23475397

  14. Complete PCB design using OrCAD capture and PCB editor

    CERN Document Server

    Mitzner, Kraig

    2009-01-01

    This book provides instruction on how to use the OrCAD design suite to design and manufacture printed circuit boards. The primary goal is to show the reader how to design a PCB using OrCAD Capture and OrCAD Editor. Capture is used to build the schematic diagram of the circuit, and Editor is used to design the circuit board so that it can be manufactured. The book is written for both students and practicing engineers who need in-depth instruction on how to use the software, and who need background knowledge of the PCB design process. KEY FEATURES:* Beginning to end cove

  15. Kartlegging av PCB i sedimenter fra Indre Sørfjord

    OpenAIRE

    Skei, J.; Klungsøyr, J.

    1990-01-01

    Som følge av forhøyede nivåer av PCB i fiskelever innerst i Sørfjorden er det gjennomført en sedimentundersøkelse for om mulig å finne kilden til PCB. Det ble ikke registrert høye nivåer av PCB i sedimentene. Høyeste konsentrasjoner ble målt i munningen av Eitrheimsvågen. Analyser av trafooljer brukt i Tyssedalsområdet viste spor av PCB. Statens forurensningstilsyn (SFT)

  16. Remediation of PCB [polychlorinated biphenyl] -contaminated soils from scrapyards

    International Nuclear Information System (INIS)

    MacKnight, S.

    1991-01-01

    Much of the recent attention on contamination of the environment by polychlorinated biphenyls (PCB) has focused on liquid PCB spills from electrical equipment. A new, and possibly more serious, source of PCB contamination is the scrap yard, typically located in or near major urban centers, where the local scrap dealer would purchase used transformers or other PCB-containing electrical equipment, recover copper and other metals, and dump the PCB-containing oils on the ground. With the rising value of urban and suburban lands, these scrap yards may be slated for redevelopment, making the cleanup of contaminated soils necessary. The heterogeneous distribution of scrap yard contaminants requires a very detailed site assessment, and the heterogeneous mixture of typical scrap yard contaminants (not only PCB) cannot be treated in a simple fashion. These problems are illustrated for the case of the assessment and cleanup of a scrap yard site in Nova Scotia. A grid block system was used to sample soil at the site, and samples were analyzed for PCB, metals, and hydrocarbons. The most severely contaminated spots were mapped; groundwater patterns were also examined. The remediation process can be divided into 5 phases: physical separation of uncontaminated material; three stages of separation of materials into those having single, several-but-similar, and multicomponent mixed contaminations; and selection of appropriate process technologies. Since there is currently no approved PCB destruction facility in Atlantic Canada, excavated soils containing PCB are stored securely on the site to await approval for some type of incineration process

  17. Gender difference in walleye PCB concentrations persists following remedial dredging

    Science.gov (United States)

    Madenjian, Charles P.; Jude, David J.; Rediske, Richard R.; O'Keefe, James P.; Noguchi, George E.

    2009-01-01

    Eleven male walleyes (Sander vitreus) and 10 female walleyes from the Saginaw Bay (Lake Huron) population were caught during the spawning run at Dow Dam (Midland, Michigan) in the Tittabawassee River during April 1996, and individual whole-fish polychlorinated biphenyl (PCB) determinations were made. Total PCB concentrations averaged 7.95 and 3.17??mg/kg for males and females, respectively. As part of the Natural Resource Damage Assessment remediation process, contaminated sediments from the Saginaw River, the main tributary to Saginaw Bay, were removed during 2000 and 2001. Total PCB concentrations of 10 male and 10 female walleyes caught at Dow Dam during April 2007 averaged 1.58 and 0.55??mg/kg, respectively. Thus, dredging of the Saginaw River appeared to be effective in reducing PCB concentrations of Saginaw Bay adult walleyes, as both males and females decreased in PCB concentration by more than 80% between 1996 and 2007. However, the ratio of male PCB concentration to female PCB concentration did not decline between 1996 and 2007. This persistent gender difference in PCB concentrations was apparently due to a gender difference in habitat utilization coupled with a persistent spatial gradient in prey fish PCB concentrations from the Saginaw River to Lake Huron.

  18. Studies on the distribution of 14C labelled PCB in the body, 2

    International Nuclear Information System (INIS)

    Nagao, Soshichi; Hosoya, Hideo; Kugoh, Tadashi

    1975-01-01

    Authors carried out the experiments of 14 C-PCB distribution in fish (Carrasius auratus) by autoradiography. 0.1 micro Ci of 14 C-PCB solution was administrated by both methods, one of the method was used as mixture of PCB solution in the environmental water of the fish and other one was used as orally medication for the fish. The fish were kept in 300 ml of exposed with 500 ml beaker per fish, and then the fish were killed for the sake of autoradiography at 1, 3, 6 and 24 hours of the experiments. Radioactivity of the water was analyzed at each experimental time as cpm/ml. In cases of the administration in the environmental water, radioactivity of the water was reducing in direct relation to the period in the contact time between the fish and the water, and autoradiogram appeared that radioactivity of the sectioning body plate was increasing in parallel with the contact in the water with the fish. In cases of the oral medication, radioactivity in the water and autoradiogram were increasing in direct relation to the period in the contact time. In both cases 14 C-PCB was found into the brain and spinal cord, it was special finding as compared with other animals. (auth.)

  19. Space program management methods and tools

    CERN Document Server

    Spagnulo, Marcello; Balduccini, Mauro; Nasini, Federico

    2013-01-01

    Beginning with the basic elements that differentiate space programs from other management challenges, Space Program Management explains through theory and example of real programs from around the world, the philosophical and technical tools needed to successfully manage large, technically complex space programs both in the government and commercial environment. Chapters address both systems and configuration management, the management of risk, estimation, measurement and control of both funding and the program schedule, and the structure of the aerospace industry worldwide.

  20. Estrogenicity and androgenicity screening of PCB sulfate monoesters in human breast cancer MCF-7 cells

    OpenAIRE

    Flor, Susanne; He, Xianran; Lehmler, Hans-Joachim; Ludewig, Gabriele

    2015-01-01

    Recent studies identified PCB sulfate esters as a major product of PCB metabolism. Since hydroxy-PCBs (HO-PCBs), the immediate precursors of PCB sulfates and important contributors to PCB toxicity, were shown to have estrogenic activity, we investigated the estrogenicity/androgenicty of a series of PCB sulfate metabolites. We synthesized the five possible structural sulfate monoester metabolites of PCB 3, a congener shown to be biotransformed to sulfates, a sulfate ester of the paint-specific...

  1. Experiment in Application of Methods of Programmed Instruction.

    Science.gov (United States)

    Fradkin, S. L.

    In a document translated from the Russian, an analysis is made of various forms and methods of programed learning. The primary developments in the introduction of programed learning methods are: creation of programed teaching aids; use of existing textbooks for programed lectures with feedback; and use of both teaching machines and machineless…

  2. A cohort study of developmental polychlorinated biphenyl (PCB) exposure in relation to post-vaccination antibody response at 6-months of age

    International Nuclear Information System (INIS)

    Jusko, Todd A.; De Roos, Anneclaire J.; Schwartz, Stephen M.; Paige Lawrence, B.; Palkovicova, Lubica; Nemessanyi, Tomas; Drobna, Beata; Fabisikova, Anna; Kocan, Anton; Sonneborn, Dean; Jahnova, Eva; Kavanagh, Terrance J.; Trnovec, Tomas; Hertz-Picciotto, Irva

    2010-01-01

    Background: Extensive experimental data in animals indicate that exposure to polychlorinated biphenyls (PCBs) during pregnancy leads to changes in offspring immune function during the postnatal period. Whether developmental PCB exposure influences immunologic development in humans has received little study. Methods: The study population was 384 mother-infant pairs recruited from two districts of eastern Slovakia for whom prospectively collected maternal, cord, and 6-month infant blood specimens were available. Several PCB congeners were measured in maternal, cord, and 6-month infant sera by high-resolution gas chromatography with electron capture detection. Concentrations of IgG-specific anti-haemophilus influenzae type b, tetanus toxoid, and diphtheria toxoid were assayed in 6-month infant sera using ELISA methods. Multiple linear regression was used to estimate the relation between maternal, cord, and 6-month infant PCB concentrations and the antibody concentrations evaluated at 6-months of age. Results: Overall, there was little evidence of an association between infant antibody concentrations and PCB measures during the pre- and early postnatal period. In addition, our results did not show specificity in terms of associations limited to a particular developmental period (e.g. pre- vs. postnatal), a particular antibody, or a particular PCB congener. Conclusions: At the PCB concentrations measured in this cohort, which are high relative to most human populations today, we did not detect an association between maternal or early postnatal PCB exposure and specific antibody responses at 6-months of age.

  3. A cohort study of developmental polychlorinated biphenyl (PCB) exposure in relation to post-vaccination antibody response at 6-months of age

    Energy Technology Data Exchange (ETDEWEB)

    Jusko, Todd A., E-mail: juskota@niehs.nih.gov [Epidemiology Branch, National Institute of Environmental Health Sciences, PO Box 12233, MD A3-05, 111 T.W. Alexander Dr, Rall Bldg 101, Rm A361, Research Triangle Park, NC 27709-2233 (United States); Department of Epidemiology, School of Public Health, University of Washington, Seattle, WA (United States); De Roos, Anneclaire J.; Schwartz, Stephen M. [Department of Epidemiology, School of Public Health, University of Washington, Seattle, WA (United States); Program in Epidemiology, Division of Public Health Sciences, Fred Hutchinson Cancer Research Center, Seattle, WA (United States); Paige Lawrence, B. [Department of Environmental Medicine, University of Rochester School of Medicine and Dentistry, Rochester, NY (United States); Palkovicova, Lubica [Department of Environmental Medicine, Slovak Medical University, Bratislava (Slovakia); Nemessanyi, Tomas [Department of Immunology and Immunotoxicology, Slovak Medical University, Bratislava (Slovakia); Drobna, Beata; Fabisikova, Anna; Kocan, Anton [Department of Toxic Organic Pollutants, Slovak Medical University, Bratislava (Slovakia); Sonneborn, Dean [Department of Public Health Sciences, University of California, Davis, CA (United States); Jahnova, Eva [Department of Immunology and Immunotoxicology, Slovak Medical University, Bratislava (Slovakia); Kavanagh, Terrance J. [Department of Environmental and Occupational Health Sciences, School of Public Health, University of Washington, Seattle, WA (United States); Trnovec, Tomas [Department of Toxic Organic Pollutants, Slovak Medical University, Bratislava (Slovakia); Hertz-Picciotto, Irva [Department of Public Health Sciences, University of California, Davis, CA (United States)

    2010-05-15

    Background: Extensive experimental data in animals indicate that exposure to polychlorinated biphenyls (PCBs) during pregnancy leads to changes in offspring immune function during the postnatal period. Whether developmental PCB exposure influences immunologic development in humans has received little study. Methods: The study population was 384 mother-infant pairs recruited from two districts of eastern Slovakia for whom prospectively collected maternal, cord, and 6-month infant blood specimens were available. Several PCB congeners were measured in maternal, cord, and 6-month infant sera by high-resolution gas chromatography with electron capture detection. Concentrations of IgG-specific anti-haemophilus influenzae type b, tetanus toxoid, and diphtheria toxoid were assayed in 6-month infant sera using ELISA methods. Multiple linear regression was used to estimate the relation between maternal, cord, and 6-month infant PCB concentrations and the antibody concentrations evaluated at 6-months of age. Results: Overall, there was little evidence of an association between infant antibody concentrations and PCB measures during the pre- and early postnatal period. In addition, our results did not show specificity in terms of associations limited to a particular developmental period (e.g. pre- vs. postnatal), a particular antibody, or a particular PCB congener. Conclusions: At the PCB concentrations measured in this cohort, which are high relative to most human populations today, we did not detect an association between maternal or early postnatal PCB exposure and specific antibody responses at 6-months of age.

  4. PCDD/F and dioxin-like PCB in human blood and milk from German mothers

    Energy Technology Data Exchange (ETDEWEB)

    Wittsiepe, J.; Schrey, P.; Lemm, F.; Wilhelm, M. [Ruhr-Univ. Bochum, Abt. fuer Hygiene, Sozial- und Umweltmedizin (Germany); Fuerst, P. [Chemisches Landes- und Staatliches Veterinaeruntersuchungsamt, Muenster (Germany); Kraft, M. [Ministerium fuer Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen, Duesseldorf (Germany); Eberwein, G. [Landesumweltamt Nordrhein-Westfalen, Essen (Germany); Winneke, G. [Medizinisches Inst. fuer Umwelthygiene an der Heinrich-Heine Univ. Duesseldorf (Germany)

    2004-09-15

    Human biomonitoring of polychlorinated dibenzo-p-dioxins and dibenzofuranes (PCDD/F) and polychlorinated biphenyls (PCB) is done by analyzing both blood and milk samples. With reference to calculation of Toxicity Equivalents (TEq) as published by the World Health Organization (WHO) in 1998 determination of 17 PCDD/F congeners together with 4 non- and 8 mono-ortho PCB congeners is the preferred method. In contrast to data on PCDD/F only little is known on background levels of dioxin-like PCB in human blood or milk samples. In the present study we report on PCDD/F and PCB levels in human blood samples of pregnant women living in an industrialized area of Germany and of human milk samples from the same women taken in the first weeks after birth. The investigations demonstrate the current background levels found in Germany, make a contribution for the assessment of preand postnatal exposure of infants and show correlations between the two matrices.

  5. Co-exposure to an ortho-substituted PCB (PCB 153) and methylmercury enhances developmental neurotoxic effects

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, C.; Fredriksson, A.; Eriksson, P. [Dept. Environment. Toxicol., Uppsala Univ. (Sweden)

    2004-09-15

    In our environment there are innumerable hazardous contaminants. Many of these compounds are the well-known persistent organic pollutants (POPs) like PCB and DDT. Another persistent agent in our environment is methylmercury (MeHg). These agents are known to be neurotoxic in laboratory animals and humans. Fetuses and neonates are known to be high-risk groups for exposure to these agents. A naturally occurring circumstance is the exposure to a combination of different persistent compounds. The knowledge of interaction between different toxic agents during development is sparse. In several studies we have shown that low-dose exposure of environmental toxic agents such as PCBs, DDT, BFRs (brominated flame retardants) as well as well-known neurotoxic agents such as nicotine, organophosphorous compounds and 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP), during the ''BGS'', in neonatal mice can lead to disruption of the adult brain function, and to an increased susceptibility to toxic agents as adults. Our studies concerning developmental neurotoxic effects after neonatal exposure to single PCB congeners have shown that some orthosubstituted PCBs (such as PCB 28, PCB 52, PCB 153) and some co-planar PCBs (such as PCB 77, PCB 126, PCB 169) cause derangement of adult behaviour that can worsen with age. Furthermore, the cholinergic receptors in the brain were also found to be affected8. Just recently we have seen that neonatal co-exposure to an ortho-substituted PCB, 2,2',5,5'-tetrachlorobiphenyl (PCB 52), together with a brominated flame retardant, 2,2',4,4',5-pentabromodiphenylether (PBDE 99), can enhance developmental neurotoxic effects when the exposure occurs during a critical stage of neonatal brain development. The present study was carried out in order to see whether PCB and MeHg could interact to cause enhanced developmental neurotoxic effects on spontaneous behaviour and habituation capability when given to neonatal mice.

  6. Perinatal exposure to PCB 153, but not PCB 126, alters bone tissue composition in female goat offspring

    International Nuclear Information System (INIS)

    Lundberg, Rebecca; Lyche, Jan L.; Ropstad, Erik; Aleksandersen, Mona; Roenn, Monika; Skaare, Janneche U.; Larsson, Sune; Orberg, Jan; Lind, P. Monica

    2006-01-01

    The aim of this study was to investigate if environmentally relevant doses of the putative estrogenic non dioxin-like PCB 153 and the dioxin-like PCB 126 caused changes in bone tissue in female goat offspring following perinatal exposure. Goat dams were orally dosed with PCB 153 in corn oil (98 μg/kg body wt/day) or PCB 126 (49 ng/kg body wt/day) from day 60 of gestation until delivery. The offspring were exposed to PCB in utero and through mother's milk. The suckling period lasted for 6 weeks. Offspring metacarpal bones were analysed using peripheral quantitative computed tomography (pQCT) after euthanisation at 9 months of age. The diaphyseal bone was analysed at a distance of 18% and 50% of the total bone length, and the metaphyseal bone at a distance of 9%. Also, biomechanical three-point bending of the bones was conducted, with the load being applied to the mid-diaphyseal pQCT measure point (50%). PCB 153 exposure significantly decreased the total cross-sectional area (125 mm 2 ± 4) versus non-exposed (142 mm 2 ± 5), decreased the marrow cavity (38 mm 2 ± 4) versus non-exposed (50 mm 2 ± 3) and decreased the moment of resistance (318 mm 3 ± 10) versus non-exposed (371 mm 3 ± 20) at the diaphyseal 18% measure point. At the metaphyseal measure point, the trabecular bone mineral density (121 mg/cm 3 ± 5) was increased versus non-exposed (111 mg/cm 3 ± 3). PCB 126 exposure did not produce any observable changes in bone tissue. The biomechanical testing of the bones did not show any significant changes in bone strength after PCB 153 or PCB 126 exposure. In conclusion, perinatal exposure to PCB 153, but not PCB 126, resulted in altered bone composition in female goat offspring

  7. Do fish growth rates correlate with PCB body burdens?

    Science.gov (United States)

    Andrew L. Rypel; David R.. Bayne

    2010-01-01

    We evaluated whether growth rates of six fish species correlated with PCB concentrations in a moderately-to-heavily polluted freshwater ecosystem. Using a large dataset (n ¼ 984 individuals), and after accounting for growth effects related to fish age, habitat, sex, and lipids, growth correlated significantly, but positively with lipid-corrected PCB concentrations for...

  8. 40 CFR 761.2 - PCB concentration assumptions for use.

    Science.gov (United States)

    2010-07-01

    ... dielectric fluid are unknown, any person must assume the transformer to be a PCB Transformer. (4) Any person must assume that a capacitor manufactured prior to July 2, 1979, whose PCB concentration is not established contains ≥500 ppm PCBs. Any person may assume that a capacitor manufactured after July 2, 1979, is...

  9. Phyto/rhizoremediation studies using long-term PCB-contaminated soil

    Czech Academy of Sciences Publication Activity Database

    Macková, M.; Prouzová, P.; Štursa, P.; Ryšlavá, E.; Uhlík, Ondřej; Beranová, K.; Rezek, Jan; Kurzawová, V.; Demnerová, K.; Macek, Tomáš

    2009-01-01

    Roč. 16, č. 7 (2009), s. 817-829 ISSN 0944-1344 Grant - others:GA ČR(CZ) GA525/09/1058; GA MŠk(CZ) 2B06156 Program:GA; 2B Institutional research plan: CEZ:AV0Z40550506 Keywords : PCB * contaminated soil * phytoremediation * rhizoremediation Subject RIV: EI - Biotechnology ; Bionics Impact factor: 2.411, year: 2009

  10. Measurement of PCB concentrations in waters using a biomonitoring programme

    International Nuclear Information System (INIS)

    Mast, P.G.

    1993-01-01

    The book describes a PCB biomonitoring programme which was developed for measuring instantaneous PCB concentrations and permits the compilation of PCB action cadastres for different types of waters and subsequent derivation of current trends. Six representative congeners were selected as a basis for the quantitative routine analysis. The fish species bream (abramis brama) and roach (rutilus rutilus) were used as indicators in the PCB biomonitoring programme on account of their distribution and ecological demands. The age and growth rate of each fish destined for analysis was determined so as to ensure that only healthy fish would be used. In both fish species the dorsal musulature with its low scatter of test results and consistent PCB pattern (internal quantification) proved a representative body region. (orig.) [de

  11. Interim Basis for PCB Sampling and Analyses

    International Nuclear Information System (INIS)

    BANNING, D.L.

    2001-01-01

    This document was developed as an interim basis for sampling and analysis of polychlorinated biphenyls (PCBs) and will be used until a formal data quality objective (DQO) document is prepared and approved. On August 31, 2000, the Framework Agreement for Management of Polychlorinated Biphenyls (PCBs) in Hanford Tank Waste was signed by the US. Department of Energy (DOE), the Environmental Protection Agency (EPA), and the Washington State Department of Ecology (Ecology) (Ecology et al. 2000). This agreement outlines the management of double shell tank (DST) waste as Toxic Substance Control Act (TSCA) PCB remediation waste based on a risk-based disposal approval option per Title 40 of the Code of Federal Regulations 761.61 (c). The agreement calls for ''Quantification of PCBs in DSTs, single shell tanks (SSTs), and incoming waste to ensure that the vitrification plant and other ancillary facilities PCB waste acceptance limits and the requirements of the anticipated risk-based disposal approval are met.'' Waste samples will be analyzed for PCBs to satisfy this requirement. This document describes the DQO process undertaken to assure appropriate data will be collected to support management of PCBs and is presented in a DQO format. The DQO process was implemented in accordance with the U.S. Environmental Protection Agency EPA QAlG4, Guidance for the Data Quality Objectives Process (EPA 1994) and the Data Quality Objectives for Sampling and Analyses, HNF-IP-0842/Rev.1 A, Vol. IV, Section 4.16 (Banning 1999)

  12. Use of RIA determination of polychlorinated biphenyls (PCB) in prevention of their penetration into the food chain

    International Nuclear Information System (INIS)

    Zajic, J.; Sisak, M.; Diblikova, I.; Bendova, J.; Matouskova, O.; Hruska, K.

    1991-01-01

    Radiomimmunological determination of polychlorinated biphenyls in milk can serve in the screening of milk cows and condemnation of contaminated individuals. The source of PCB contamination can be ascertained by checking the routes the milk is passing. The RIA method was also employed to examine bioptically taken cow fat. The method was also applied to human milk in a maternity hospital in Brno; out of 55 samples, none exhibited a PCB concentration higher than 1.4 mg/kg. (M.D.). 3 tabs., 4 figs

  13. Design of PCB search coils for AC magnetic flux density measurement

    Science.gov (United States)

    Ulvr, Michal

    2018-04-01

    This paper presents single-layer, double-layer and ten-layer planar square search coils designed for AC magnetic flux density amplitude measurement up to 1 T in the low frequency range in a 10 mm air gap. The printed-circuit-board (PCB) method was used for producing the search coils. Special attention is given to a full characterization of the PCB search coils including a comparison between the detailed analytical design method and the finite integration technique method (FIT) on the one hand, and experimental results on the other. The results show very good agreement in the resistance, inductance and search coil constant values (the area turns) and also in the frequency dependence of the search coil constant.

  14. Sexual difference in PCB concentrations of coho salmon (Oncorhynchus kisutch)

    Science.gov (United States)

    Madenjian, Charles P.; Schrank, Candy S.; Begnoche, Linda J.; Elliott, Robert F.; Quintal, Richard T.

    2010-01-01

    We determined polychlorinated biphenyl (PCB) concentrations in 35 female coho salmon (Oncorhynchus kisutch) and 60 male coho salmon caught in Lake Michigan (Michigan and Wisconsin, United States) during the fall of 1994 and 1995. In addition, we determined PCB concentrations in the skin-on fillets of 26 female and 19 male Lake Michigan coho salmon caught during the fall of 2004 and 2006. All coho salmon were age-2 fish. These fish were caught prior to spawning, and therefore release of eggs could not account for sexual differences in PCB concentrations because female coho salmon spawn only once during their lifetime. To investigate whether gross growth efficiency (GGE) differed between the sexes, we applied bioenergetics modeling. Results showed that, on average, males were 19% higher in PCB concentration than females, based on the 1994–1995 dataset. Similarly, males averaged a 20% higher PCB concentration in their skin-on fillets compared with females. According to the bioenergetics modeling results, GGE of adult females was less than 1% higher than adult male GGE. Thus, bioenergetics modeling could not explain the 20% higher PCB concentration exhibited by the males. Nonetheless, a sexual difference in GGE remained a plausible explanation for the sexual difference in PCB concentrations.

  15. 40 CFR 761.63 - PCB household waste storage and disposal.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false PCB household waste storage and..., AND USE PROHIBITIONS Storage and Disposal § 761.63 PCB household waste storage and disposal. PCB... to manage municipal or industrial solid waste, or in a facility with an approval to dispose of PCB...

  16. Laboratory study of PCB transport from primary sources to settled dust

    Science.gov (United States)

    Transport of house dust and Arizona Test Dust on polychlorinated biphenyl (PCB)-containing panels and PCB-free panels was investigated in a 30-m3 stainless steel chamber. The PCB-containing panels were aluminum sheets coated with a PCB-spiked, oil-based primer or two-part polysul...

  17. Interior-Point Methods for Linear Programming: A Review

    Science.gov (United States)

    Singh, J. N.; Singh, D.

    2002-01-01

    The paper reviews some recent advances in interior-point methods for linear programming and indicates directions in which future progress can be made. Most of the interior-point methods belong to any of three categories: affine-scaling methods, potential reduction methods and central path methods. These methods are discussed together with…

  18. Non-linear programming method in optimization of fast reactors

    International Nuclear Information System (INIS)

    Pavelesku, M.; Dumitresku, Kh.; Adam, S.

    1975-01-01

    Application of the non-linear programming methods on optimization of nuclear materials distribution in fast reactor is discussed. The programming task composition is made on the basis of the reactor calculation dependent on the fuel distribution strategy. As an illustration of this method application the solution of simple example is given. Solution of the non-linear program is done on the basis of the numerical method SUMT. (I.T.)

  19. Probabilistic methods for maintenance program optimization

    International Nuclear Information System (INIS)

    Liming, J.K.; Smith, M.J.; Gekler, W.C.

    1989-01-01

    In today's regulatory and economic environments, it is more important than ever that managers, engineers, and plant staff join together in developing and implementing effective management plans for safety and economic risk. This need applied to both power generating stations and other process facilities. One of the most critical parts of these management plans is the development and continuous enhancement of a maintenance program that optimizes plant or facility safety and profitability. The ultimate objective is to maximize the potential for station or facility success, usually measured in terms of projected financial profitability, while meeting or exceeding meaningful and reasonable safety goals, usually measured in terms of projected damage or consequence frequencies. This paper describes the use of the latest concepts in developing and evaluating maintenance programs to achieve maintenance program optimization (MPO). These concepts are based on significant field experience gained through the integration and application of fundamentals developed for industry and Electric Power Research Institute (EPRI)-sponsored projects on preventive maintenance (PM) program development and reliability-centered maintenance (RCM)

  20. Laboratory test of source encapsulation for decreasing PCB concentrations

    DEFF Research Database (Denmark)

    Kolarik, Barbara; Andersen, Helle Vibeke; Markowicz, Pawel

    2016-01-01

    This study investigates the effect of encapsulation of tertiary PCB sources with PERMASORB™ Adsorber Wallpaper and the surface emissions trap (cTrap) on indoor air concentration of PCBs and on the PCB content in the source. The 40 weeks long laboratory investigation shows reduction of the air...... concentration by approx. 90% for both wallpapers, a level comparable to source removal. The potential for extraction of PCBs from the contaminated materials stays unclear for both wallpapers. The cTrap has shown potential to accumulate PCBs, however the total content of PCB in investigated sources has...... apparently increased. The opposite was observed for the PERMASORB™, where the total PCB content in the sources has decreased, with however only small concentration of PCBs in the wallpaper measured at the end of the experiment....

  1. New EPA ban stymies Canadian exports of PCB waste

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    With reference to a 1996 EPA ruling permitting the importation to the USA of PCBs for incineration, a unanimous three-judge panel of the US Court of Appeals for the Ninth District in San Francisco ruled that the Environmental Protection Agency (EPA) did not have the authority to permit the import of PCB wastes into the USA for disposal. Prior to the decision, 35 applications from Canada to export some 37,000 tonnes of PCB to the USA for disposal have been approved. Canadian brokers are upset with the decision, claiming that the decision will create a virtual monopoly for Bovar Inc., of Calgary, the only PCB-disposal facility in Canada. The loss (at least for the time being) of the alternate disposal opportunity will likely have the effect of forcing Canadian customers to pay more for PCB disposal. The Canadian government is monitoring the situation and is waiting to see whether an appeal is filed against the ruling

  2. Radon Measurement Proficiency (RMP) Program methods and devices

    International Nuclear Information System (INIS)

    Harrison, J.; Hoornbeek, J.; Jalbert, P.; Sensintaffar, E.; Hopper, R.

    1991-01-01

    The US EPA developed the voluntary Radon Measurement Proficiency Program in 1986 in response to a Federal and State need for measurement services firms to demonstrate their proficiency with radon measurement methods and devices. Since that time, the program has set basic standards for the radon measurement industry. The program has grown dramatically since its inception. In 1986, fewer than 50 companies participated in the program. By 1989, more than 5,000 companies were participating. Participants represent firms with an analytical capability as well as firms that rely upon another firm for analysis service. Since the beginning of the RMP Program, the Agency has learned a great deal about radon measurement methods and devices. This paper reviews the measurement devices used in the program and what the EPA has learned about them since the program's inception. Performance data from the RMP Program are used to highlight relevant findings

  3. Prenatal Exposure to DDE and PCB 153 and Respiratory Health in Early Childhood

    DEFF Research Database (Denmark)

    Gascon, Mireia; Sunyer, Jordi; Casas, Maribel

    2014-01-01

    BACKGROUND: Persistent organic pollutants may affect the immune and respiratory systems, but available evidence is based on small study populations. We studied the association between prenatal exposure to dichlorodiphenyldichloroethylene (DDE) and polychlorinated biphenyl 153 (PCB 153) and children......'s respiratory health in European birth cohorts. METHODS: We included 4608 mothers and children enrolled in 10 birth cohort studies from 7 European countries. Outcomes were parent-reported bronchitis and wheeze in the first 4 years of life. For each cohort, we performed Poisson regression analyses, modeling...... 153 tertiles of exposure, whereas DDE associations were more robust. CONCLUSION: This large meta-analysis suggests that prenatal DDE exposure may be associated with respiratory health symptoms in young children (below 18 months), whereas prenatal PCB 153 levels were not associated with such symptoms....

  4. PCB exposure and cochlear function at age 6 years.

    Science.gov (United States)

    Palkovičová Murínová, Ľubica; Moleti, Arturo; Sisto, Renata; Wimmerová, Soňa; Jusko, Todd A; Tihányi, Juraj; Jurečková, Dana; Kováč, Ján; Koštiaková, Vladimíra; Drobná, Beata; Trnovec, Tomáš

    2016-11-01

    Epidemiological studies have documented adverse associations between exposure to polychlorinated biphenyls (PCBs) and otological outcomes. Previously, we documented decreased distortion product otoacoustic emission (DPOAE) levels in children exposed to PCBs, up to the age of 45 months, amongst a cohort of children in eastern Slovakia. The objective of the present study is to evaluate cochlear dysfunction at 72 months of age in 214 children from this same cohort and to compare the otoacoustic test sensitivity to that of pure tone audiometry (PTA). The association between DPOAE, PTA, and PCBs was estimated by means of multivariate ANOVA (MANOVA) and linear regression models. ROC curves were computed to estimate the DPOAE-test power in children. The DPOAE level at 72 months was related to PCB-153 serum levels. The DPOAE Input/Output function test at mid-frequency (2kHz) has shown instead nonmonotonic dependence on PCB exposure, for the left ears of children, over the whole growth curve. No significant association was found between PTA hearing levels and PCB-153 concentration. High diagnostic power of the DPOAE-test was found in children, similar to that found by the same authors in adults. In conclusions the DPOAE-PCB correlation obtained at 72 months is similar to that at 45 months suggesting a permanent and stable ototoxic effect of the PCB exposure. The lack of statistical significance of the PCB-PTA correlation suggests that DPOAEs are sensitive biomarkers of cochlear damage. Copyright © 2016 Elsevier Inc. All rights reserved.

  5. Schiff Base modified on CPE electrode and PCB gold electrode for selective determination of silver ion

    Science.gov (United States)

    Leepheng, Piyawan; Suramitr, Songwut; Phromyothin, Darinee

    2017-09-01

    The schiff base was synthesized by 2,5-thiophenedicarboxaldehyde and 1,2,4-thiadiazole-3,5-diamine with condensation method. There was modified on carbon paste electrode (CPE) and Printed circuit board (PCB) gold electrode for determination silver ion. The schiff base modified electrodes was characterized by atomic force microscopy (AFM) and scanning electron microscopy (SEM), respectively. The electrochemical study was reported by cyclic voltammetry method and impedance spectroscopy using modified electrode as working electrode, platinum wire and Ag/AgCl as counter electrode and reference electrode, respectively. The modified electrodes have suitable detection for Ag+. The determination of silver ions using the modified electrodes depended linearly on Ag+ concentration in the range 1×10-10 M to 1×10-7 M, with cyclic voltammetry sensitivity were 2.51×108 μAM-1 and 1.88×108 μAM-1 for PCB gold electrode and CPE electrode, respectively, limits of detection were 5.33×10-9 M and 1.99×10-8 M for PCB gold electrode and CPE electrode, respectively. The modified electrodes have high accuracy, inexpensive and can applied to detection Ag+ in real samples.

  6. PCB-153 shows different dynamics of mobilisation from differentiated rat adipocytes during lipolysis in comparison with PCB-28 and PCB-118.

    Science.gov (United States)

    Louis, Caroline; Tinant, Gilles; Mignolet, Eric; Thomé, Jean-Pierre; Debier, Cathy

    2014-01-01

    Polychlorinated biphenyls (PCBs) are persistent organic pollutants. Due to their lipophilic character, they are preferentially stored within the adipose tissue. During the mobilisation of lipids, PCBs might be released from adipocytes into the bloodstream. However, the mechanisms associated with the release of PCBs have been poorly studied. Several in vivo studies followed their dynamics of release but the complexity of the in vivo situation, which is characterised by a large range of pollutants, does not allow understanding precisely the behaviour of individual congeners. The present in vitro experiment studied the impact of (i) the number and position of chlorine atoms of PCBs on their release from adipocytes and (ii) the presence of other PCB congeners on the mobilisation rate of such molecules. Differentiated rat adipocytes were used to compare the behaviour of PCB-28, -118 and -153. Cells were contaminated with the three congeners, alone or in cocktail, and a lipolysis was then induced with isoproterenol during 12 hours. Our data indicate that the three congeners were efficiently released from adipocytes and accumulated in the medium during the lipolysis. Interestingly, for a same level of cell lipids, PCB-153, a hexa-CB with two chlorine atoms in ortho-position, was mobilised slower than PCB-28, a tri-CB, and PCB-118, a penta-CB, which are both characterised by one chlorine atom in ortho-position. It suggests an impact of the chemical properties of pollutants on their mobilisation during periods of negative energy balance. Moreover, the mobilisation of PCB congeners, taken individually, did not seem to be influenced by the presence of other congeners within adipocytes. These results not only highlight the obvious mobilisation of PCBs from adipocytes during lipolysis, in parallel to lipids, but also demonstrate that the structure of congeners defines their rate of release from adipocytes.

  7. PCB management and the environmental movement

    International Nuclear Information System (INIS)

    White, D.

    1995-01-01

    Some key issues of public concern about hazardous waste incinerators and, in general, the management of toxic wastes, have been identified with a view to counter arguments brought forward by environmentalists and to offer reassurance based on scientific evidence. The case in point is the long-term management of London's (Ontario) PCB inventory, extensively studied by Proctor and Redfern Ltd., a consultant group. They recommended thermal destruction of the PCBs as the most effective and permanent solution. Their report was subsequently attacked by Greenpeace, whose main concern was the consultants's recommendation to rely on destruction by incineration and removal efficiency values. Greenpeace also raised doubts about recommended measures against emissions of products of incomplete combustion, the incineration of metal containing waste, and the validity of health risk assessment. Evidence from Proctor and Redfern's own consulting experience, and other published scientific studies were used to show the fallacy of Greenpeace's arguments, claiming that they were based on unscientific, outdated and seemingly selective information, resulting in completely misleading assessment of incineration as an effective means of toxic waste management. 7 refs., 2 tabs., 1 fig

  8. Historical reconstruction of polychlorinated biphenyl (PCB) exposures for workers in a capacitor manufacturing plant.

    Science.gov (United States)

    Hopf, Nancy B; Ruder, Avima M; Waters, Martha A

    2014-05-01

    We developed a semiquantitative job exposure matrix (JEM) for workers exposed to polychlorinated biphenyls (PCBs) at a capacitor manufacturing plant from 1946 to 1977. In a recently updated mortality study, mortality of prostate and stomach cancer increased with increasing levels of cumulative exposure estimated with this JEM (trend p values = 0.003 and 0.04, respectively). Capacitor manufacturing began with winding bales of foil and paper film, which were placed in a metal capacitor box (pre-assembly), and placed in a vacuum chamber for flood-filling (impregnation) with dielectric fluid (PCBs). Capacitors dripping with PCB residues were then transported to sealing stations where ports were soldered shut before degreasing, leak testing, and painting. Using a systematic approach, all 509 unique jobs identified in the work histories were rated by predetermined process- and plant-specific exposure determinants; then categorized based on the jobs' similarities (combination of exposure determinants) into 35 job exposure categories. The job exposure categories were ranked followed by a qualitative PCB exposure rating (baseline, low, medium, and high) for inhalation and dermal intensity. Category differences in other chemical exposures (solvents, etc.) prevented further combining of categories. The mean of all available PCB concentrations (1975 and 1977) for jobs within each intensity rating was regarded as a representative value for that intensity level. Inhalation (in microgram per cubic milligram) and dermal (unitless) exposures were regarded as equally important. Intensity was frequency adjusted for jobs with continuous or intermittent PCB exposures. Era-modifying factors were applied to the earlier time periods (1946-1974) because exposures were considered to have been greater than in later eras (1975-1977). Such interpolations, extrapolations, and modifying factors may introduce non-differential misclassification; however, we do believe our rigorous method

  9. Biological treatment processes for PCB contaminated soil at a site in Newfoundland

    International Nuclear Information System (INIS)

    Punt, M.; Cooper, D.; Velicogna, D.; Mohn, W.; Reimer, K.; Parsons, D.; Patel, T.; Daugulis, A.

    2002-01-01

    SAIC Canada is conducting a study under the direction of a joint research and development contract between Public Works and Government Services Canada and Environment Canada to examine the biological options for treating PCB contaminated soil found at a containment cell at a former U.S. Military Base near Stephenville, Newfoundland. In particular, the study examines the feasibility of using indigenous microbes for the degradation of PCBs. The first phase of the study involved the testing of the microbes in a bioreactor. The second phase, currently underway, involves a complete evaluation of possible microbes for PCB degradation. It also involves further study into the biological process options for the site. Suitable indigenous and non-indigenous microbes for PCB dechlorination and biphenyl degradation are being identified and evaluated. In addition, the effectiveness and economics of microbial treatment in a conventional bioreactor is being evaluated. The conventional bioreactor used in this study is the two-phase partitioning bioreactor (TPPB) using a biopile process. Results thus far will be used to help Public Works and Government Services Canada to choose the most appropriate remedial technology. Preliminary results suggest that the use of soil classification could reduce the volume of soil requiring treatment. The soil in the containment cell contains microorganisms that could grow in isolation on biphenyl, naphthalene and potentially Aroclor 1254. Isolated native microbes were inoculated in the TPPB for growth. The TPPB was also run successfully under anaerobic conditions. Future work will involve lab-scale evaluation of microbes for PCB dechlorination and biphenyl degradation using both indigenous and non-indigenous microbes. The next phase of study may also involve field-scale demonstration of treatment methods. 2 refs., 3 tabs., 5 figs

  10. Pair Programming as a Modern Method of Teaching Computer Science

    Directory of Open Access Journals (Sweden)

    Irena Nančovska Šerbec

    2008-10-01

    Full Text Available At the Faculty of Education, University of Ljubljana we educate future computer science teachers. Beside didactical, pedagogical, mathematical and other interdisciplinary knowledge, students gain knowledge and skills of programming that are crucial for computer science teachers. For all courses, the main emphasis is the absorption of professional competences, related to the teaching profession and the programming profile. The latter are selected according to the well-known document, the ACM Computing Curricula. The professional knowledge is therefore associated and combined with the teaching knowledge and skills. In the paper we present how to achieve competences related to programming by using different didactical models (semiotic ladder, cognitive objectives taxonomy, problem solving and modern teaching method “pair programming”. Pair programming differs from standard methods (individual work, seminars, projects etc.. It belongs to the extreme programming as a discipline of software development and is known to have positive effects on teaching first programming language. We have experimentally observed pair programming in the introductory programming course. The paper presents and analyzes the results of using this method: the aspects of satisfaction during programming and the level of gained knowledge. The results are in general positive and demonstrate the promising usage of this teaching method.

  11. Method to render second order beam optics programs symplectic

    International Nuclear Information System (INIS)

    Douglas, D.; Servranckx, R.V.

    1984-10-01

    We present evidence that second order matrix-based beam optics programs violate the symplectic condition. A simple method to avoid this difficulty, based on a generating function approach to evaluating transfer maps, is described. A simple example illustrating the non-symplectricity of second order matrix methods, and the effectiveness of our solution to the problem, is provided. We conclude that it is in fact possible to bring second order matrix optics methods to a canonical form. The procedure for doing so has been implemented in the program DIMAT, and could be implemented in programs such as TRANSPORT and TURTLE, making them useful in multiturn applications. 15 refs

  12. Population Estimation with Mark and Recapture Method Program

    International Nuclear Information System (INIS)

    Limohpasmanee, W.; Kaewchoung, W.

    1998-01-01

    Population estimation is the important information which required for the insect control planning especially the controlling with SIT. Moreover, It can be used to evaluate the efficiency of controlling method. Due to the complexity of calculation, the population estimation with mark and recapture methods were not used widely. So that, this program is developed with Qbasic on the purpose to make it accuracy and easier. The program evaluation consists with 6 methods; follow Seber's, Jolly-seber's, Jackson's Ito's, Hamada's and Yamamura's methods. The results are compared with the original methods, found that they are accuracy and more easier to applied

  13. An overview of solution methods for multi-objective mixed integer linear programming programs

    DEFF Research Database (Denmark)

    Andersen, Kim Allan; Stidsen, Thomas Riis

    Multiple objective mixed integer linear programming (MOMIP) problems are notoriously hard to solve to optimality, i.e. finding the complete set of non-dominated solutions. We will give an overview of existing methods. Among those are interactive methods, the two phases method and enumeration...... methods. In particular we will discuss the existing branch and bound approaches for solving multiple objective integer programming problems. Despite the fact that branch and bound methods has been applied successfully to integer programming problems with one criterion only a few attempts has been made...

  14. Systems and methods for interpolation-based dynamic programming

    KAUST Repository

    Rockwood, Alyn

    2013-01-03

    Embodiments of systems and methods for interpolation-based dynamic programming. In one embodiment, the method includes receiving an object function and a set of constraints associated with the objective function. The method may also include identifying a solution on the objective function corresponding to intersections of the constraints. Additionally, the method may include generating an interpolated surface that is in constant contact with the solution. The method may also include generating a vector field in response to the interpolated surface.

  15. Systems and methods for interpolation-based dynamic programming

    KAUST Repository

    Rockwood, Alyn

    2013-01-01

    Embodiments of systems and methods for interpolation-based dynamic programming. In one embodiment, the method includes receiving an object function and a set of constraints associated with the objective function. The method may also include identifying a solution on the objective function corresponding to intersections of the constraints. Additionally, the method may include generating an interpolated surface that is in constant contact with the solution. The method may also include generating a vector field in response to the interpolated surface.

  16. Simple Calculation Programs for Biology Methods in Molecular ...

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Simple Calculation Programs for Biology Methods in Molecular Biology. GMAP: A program for mapping potential restriction sites. RE sites in ambiguous and non-ambiguous DNA sequence; Minimum number of silent mutations required for introducing a RE sites; Set ...

  17. Application of the simplex method of linear programming model to ...

    African Journals Online (AJOL)

    This work discussed how the simplex method of linear programming could be used to maximize the profit of any business firm using Saclux Paint Company as a case study. It equally elucidated the effect variation in the optimal result obtained from linear programming model, will have on any given firm. It was demonstrated ...

  18. Green PCB Remediation from Sediment Systems (GPRSS) Project

    Science.gov (United States)

    Falker, John; Thompson, Karen; Zeitlin, Nancy; Quinn, Jacqueline; Parrish, Lewis M.

    2014-01-01

    An ongoing problem facing the global environment community including NASA centers is the removal and remediation of polychlorinated biphenyls (PCBs). PCBs were commonly used in a variety of materials including paints, caulking, and adhesives due to the advantageous physical and chemical properties that PCBs imparted to these various materials. Unfortunately, these properties have made the treatment of sites contaminated with these chemicals extremely difficult to deal with, due to their inherent chemical stability. The remediation of sediments contaminated with PCBs is especially difficult, primarily due to the risk of releasing the contaminant into the environment during the treatment process. Traditional treatment options involve the use of dredging and incineration of the contaminated soils/sediments, in which the chance of releasing the contaminants is greatly increased. The purpose of this project is to develop cleanup technology capable of remediating contaminated sediments in-situ, with minimum intrusion. This allows for the minimization of any potential contaminant release during the treatment process, providing a safer method for cleanup operations (as opposed to dredging/incineration) and still treating the basic problem of PCB contamination (as opposed to capping).

  19. Matlab and C programming for Trefftz finite element methods

    CERN Document Server

    Qin, Qing-Hua

    2008-01-01

    Although the Trefftz finite element method (FEM) has become a powerful computational tool in the analysis of plane elasticity, thin and thick plate bending, Poisson's equation, heat conduction, and piezoelectric materials, there are few books that offer a comprehensive computer programming treatment of the subject. Collecting results scattered in the literature, MATLAB® and C Programming for Trefftz Finite Element Methods provides the detailed MATLAB® and C programming processes in applications of the Trefftz FEM to potential and elastic problems. The book begins with an introduction to th

  20. A mathematical method for boiling water reactor control rod programming

    International Nuclear Information System (INIS)

    Tokumasu, S.; Hiranuma, H.; Ozawa, M.; Yokomi, M.

    1985-01-01

    A new mathematical programming method has been developed and utilized in OPROD, an existing computer code for automatic generation of control rod programs as an alternative inner-loop routine for the method of approximate programming. The new routine is constructed of a dual feasible direction algorithm, and consists essentially of two stages of iterative optimization procedures Optimization Procedures I and II. Both follow almost the same algorithm; Optimization Procedure I searches for feasible solutions and Optimization Procedure II optimizes the objective function. Optimization theory and computer simulations have demonstrated that the new routine could find optimum solutions, even if deteriorated initial control rod patterns were given

  1. Step by step parallel programming method for molecular dynamics code

    International Nuclear Information System (INIS)

    Orii, Shigeo; Ohta, Toshio

    1996-07-01

    Parallel programming for a numerical simulation program of molecular dynamics is carried out with a step-by-step programming technique using the two phase method. As a result, within the range of a certain computing parameters, it is found to obtain parallel performance by using the level of parallel programming which decomposes the calculation according to indices of do-loops into each processor on the vector parallel computer VPP500 and the scalar parallel computer Paragon. It is also found that VPP500 shows parallel performance in wider range computing parameters. The reason is that the time cost of the program parts, which can not be reduced by the do-loop level of the parallel programming, can be reduced to the negligible level by the vectorization. After that, the time consuming parts of the program are concentrated on less parts that can be accelerated by the do-loop level of the parallel programming. This report shows the step-by-step parallel programming method and the parallel performance of the molecular dynamics code on VPP500 and Paragon. (author)

  2. Energy spectrum analysis between single and dual energy source x-ray imaging for PCB non-destructive test

    International Nuclear Information System (INIS)

    Park, Kyeong Jin; Kim, Myung Soo; Lee, Min Ju; Kang, Dong Uk; Lee, Dae Hee; Kim, Ye Won; Kim, Chan Kyu; Kim, Hyoung Taek; Kim, Gi Yoon; Cho, Gyu Seong

    2015-01-01

    Reliability of printed circuit board (PCB), which is based on high integrated circuit technology, is having been important because of development of electric and self-driving car. In order to answer these demand, automated X-ray inspection (AXI) is best solution for PCB nondestructive test. PCB is consist of plastic, copper, and, lead, which have low to high Z-number materials. By using dual energy X-ray imaging, these materials can be inspected accurately and efficiently. Dual energy X-ray imaging, that have the advantage of separating materials, however, need some solution such as energy separation method and enhancing efficiency because PCB has materials that has wide range of Z-number. In this work, we found out several things by analysis of X-ray energy spectrum. Separating between lead and combination of plastic and copper is only possible with energy range not dose. On the other hand, separating between plastic and copper is only with dose not energy range. Moreover the copper filter of high energy part of dual X-ray imaging and 50 kVp of low energy part of dual X-ray imaging is best for efficiency

  3. Energy spectrum analysis between single and dual energy source x-ray imaging for PCB non-destructive test

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kyeong Jin; Kim, Myung Soo; Lee, Min Ju; Kang, Dong Uk; Lee, Dae Hee; Kim, Ye Won; Kim, Chan Kyu; Kim, Hyoung Taek; Kim, Gi Yoon; Cho, Gyu Seong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-08-15

    Reliability of printed circuit board (PCB), which is based on high integrated circuit technology, is having been important because of development of electric and self-driving car. In order to answer these demand, automated X-ray inspection (AXI) is best solution for PCB nondestructive test. PCB is consist of plastic, copper, and, lead, which have low to high Z-number materials. By using dual energy X-ray imaging, these materials can be inspected accurately and efficiently. Dual energy X-ray imaging, that have the advantage of separating materials, however, need some solution such as energy separation method and enhancing efficiency because PCB has materials that has wide range of Z-number. In this work, we found out several things by analysis of X-ray energy spectrum. Separating between lead and combination of plastic and copper is only possible with energy range not dose. On the other hand, separating between plastic and copper is only with dose not energy range. Moreover the copper filter of high energy part of dual X-ray imaging and 50 kVp of low energy part of dual X-ray imaging is best for efficiency.

  4. Application of tritium-labeled complex technical mixture of PCB congeners as radiotracer in ecological investigations

    International Nuclear Information System (INIS)

    Kim, A.A.

    2005-01-01

    The quantitative analysis of PCBs (polychlorinated biphenyls) is enough difficult analytical task. According to IUPAC nomenclature it is described more than 200 possible PCB congeners from which about 150 congeners are present at an environment. At the same time in environment PCBs are present as complex technical mixes of congeners (trade names include Apirolio, Aroclor, Clophen, Fenchlor, Kanechlor, Phenoclor, Pyralene, Pyranol, Pyroclor, Santotherm FR, and Sovol). In routine practice of gas chromatography analysis the quantitative measurement of PCB marker congeners is applied. In the most samples containing PCBs, there are often several dozens of different congeners. For practical reasons, all of them are not always measured, but the most important congeners are used as indicators. In Belgian chicken incident, only seven abundant congeners were usually measured: congeners with IUPAC numbers 28, 52, 101, 118, 138, 153, and 180 (2,4,4 '-TriCB, 2,2 ', 5,5 '-TCB, 2,2 ', 4,5,5 '-PeCB, 2,3 ', 4,4 ', 5-PeCB, 2,2 ', 3,4,4 ', 5 '-HxCB, 2,2 ', 4,4 ', 5,5 '-HxCB, 2,2 ', 3,4,4 ', 5,5 '-HpCB, respectively). The seven congeners are estimated to constitute about one third of all PCBs in the contaminated feed. Such measurement can give the big error in a quantitative estimation of PCBs contents in a sample. As alternative method of quantitative measurement PCBs the radiochemical method with use radioactive labeled PCBs as radiotracer can be used. We had been developed a method of synthesis of labeled by thermally activated tritium a complex technical mixture of PCBs congeners - Sovol. We had been showed a basic opportunity of receiving of uniformly tritium labeled mixture of PCBs congeners without structural failure of mixture. The tritium labeled preparation of complex technical mixture of PCBs congeners (Sovol) has been received. On the basis of received tritium labeled preparation of PCBs (Sovol) we had been developed the following quantitative and qualitative radiochemical

  5. Environment Canada defends decision to ban PCB waste exports

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    The position of Environment Canada in banning the export of PCB waste to the United States was defended as falling within their jurisdiction under provisions of the the Canadian Environmental Protection Act. The United States had previously banned the import of Canadian PCBs, but when it reversed its decision Environment Canada posted an Interim Order, upholding the ban. The decision to do so was based on protection of the large investment that was made to develop the Canadian PCB incineration facility in Swan Lake, Alberta. Canada also had an obligation under the Basel Convention to reduce it cross boundary movement of hazardous waste and provide adequate destruction facilities in Canada. Legal implications of PCB exports and the uncertainty of continuing access to American facilities were also cited as reasons for issuing the Interim Order

  6. Thermal dechlorination of PCB-209 over Ca species-doped Fe₂O₃.

    Science.gov (United States)

    Su, Guijin; Huang, Linyan; Shi, Ruifang; Liu, Yexuan; Lu, Huijie; Zhao, Yuyang; Yang, Fan; Gao, Lirong; Zheng, Minghui

    2016-02-01

    Degradation reaction of decachlorobiphenyl (PCB-209) was investigated over the synthesized Ca species-doped Fe2O3 at 300 °C. The 1%Ca-Fe2O3 exhibited the highest activity among the four catalysts prepared with the pseudo-first order reaction at k(obs) = 0.103 min(-1). PCB-207, PCB-197, PCB-176, PCB-184, PCB-150, PCB-136, PCB-148, PCB-104, PCB-96, PCB-54, PCB-19, PCB-4 and PCB-1 were identified as the dominant isomers in their respective nonachlorobiphenyl (NonaCB) to monochlorobiphenyl (MonoCB) homologue groups. Analysis of the hydrodechlorination products indicated that dechlorination was much more favored on meta- and para-than on ortho-positions. The formation of significantly predominant NonaCB and octachlorobiphenyl (OctaCB) isomers was attributed to lower energy principles and to the 90° dihedral angles of two aromatic rings which prevented the hydrodechlorination at ortho-positions. When the number of chlorine atoms is not more than 7, the steric effect supports the formation of predominant PCB isomers having chlorines at four ortho-positions. During the dechlorination of tetrachlorobiphenyl (TetraCB) formed to generate monochlorobiphenyl (MonoCB) isomers, the chlorine atoms fully substituted at the ortho-positions have to be successively removed, with the first two dechlorinations preferentially occurring at the two different benzene rings. This is dissimilar to that of octachloronaphthalene (PCN-75) in which the hydrodechlorination reaction happened preferentially at ortho-position due to the existence of steric effects. The opposite roles of the steric effect in ortho-position between PCB-209 and PCN-75 might be due to the difference of the π-conjugated plane caused by the dihedral angle of 90° and 0° of the two aromatic rings. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. An overlooked environmental issue? A review of the inadvertent formation of PCB-11 and other PCB congeners and their occurrence in consumer products and in the environment.

    Science.gov (United States)

    Vorkamp, Katrin

    2016-01-15

    Polychlorinated biphenyls (PCBs) are banned from production and use in most countries as they are persistent organic pollutants (POPs) of concern for environment and health. Recent research has pointed at a new environment issue resulting from the inadvertent formation of PCBs in certain processes, in particular the pigment production. PCB-11 is a major by-product in these processes, but PCB-28, PCB-52, PCB-77 as well as the nonachlorinated PCBs and PCB-209 have been found in pigments and consumer products as well. In addition to environmental emissions via point sources, in particular related to industrial and municipal wastewater, atmospheric transport seems to be important for the global distribution of PCB-11. Thus, PCB-11 has also been detected in the polar regions. Worldwide air concentrations appear relatively uniform, but maxima have been found in urban and industrialised areas. Data on the uptake and accumulation of PCB-11 in the food chain are still inconclusive: Although food web studies do not show biomagnification, PCB-11 has been detected in humans. The human exposure might originate from the direct contact to consumer products as well as from the omnipresence of PCB-11 in the environment. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. RANCANG BANGUN CNC MILLING MACHINEHOME MADE UNTUK MEMBUAT PCB

    Directory of Open Access Journals (Sweden)

    Dityo Pradana

    2011-06-01

    Full Text Available Kendala yang dimiliki oleh seorang penggemar elektronik untuk membuat PCB diantaranya adalah efisiensi waktu, tenaga, dan biaya. Pembuatan CNC milling machine merupakan salah satu solusi yang tepat untuk membuat PCB. CNC milling machine adalah mesin bubut otomatis yang bekerja atas dasar perintah Numerical Code. Rancang bangun CNC Milling Machine Home Made ini dikontrol oleh komputer yang akan mengontrol IC L297 melalui parallel port. IC L297 ini kemudian memberikan empat data digital a, b, c dan d untuk mengatur phase IC L298 yang menyalurkan tegangan untuk koil motor stepper unipolar. Pada akhirnya motor stepper unipolar akan memutar baut dan dapat menggerakkan meja sumbu menggunakan prinsip kerja ulir.

  9. PCB Embedded Inductor for High-Frequency ZVS SEPIC Converter

    DEFF Research Database (Denmark)

    Dou, Yi; Ouyang, Ziwei; Thummala, Prasanth

    2018-01-01

    The volume and temperature rise of passive components, especially inductors, limit the momentum toward high power density in high-frequency power converters. To address the limitations, PCB integration of passive components should be considered with the benefit of low profile, excellent thermal...... characteristic and cost reduction. This paper investigates an embedded structure of inductors to further increase the power density of a low power DC-DC converter. A pair of coupling inductors have been embedded into the PCB. The detailed embedded process has been described and the characteristics of embedded...

  10. Interior Point Methods for Large-Scale Nonlinear Programming

    Czech Academy of Sciences Publication Activity Database

    Lukšan, Ladislav; Matonoha, Ctirad; Vlček, Jan

    2005-01-01

    Roč. 20, č. 4-5 (2005), s. 569-582 ISSN 1055-6788 R&D Projects: GA AV ČR IAA1030405 Institutional research plan: CEZ:AV0Z10300504 Keywords : nonlinear programming * interior point methods * KKT systems * indefinite preconditioners * filter methods * algorithms Subject RIV: BA - General Mathematics Impact factor: 0.477, year: 2005

  11. Pyrochemical and Dry Processing Methods Program. A selected bibliography

    International Nuclear Information System (INIS)

    McDuffie, H.F.; Smith, D.H.; Owen, P.T.

    1979-03-01

    This selected bibliography with abstracts was compiled to provide information support to the Pyrochemical and Dry Processing Methods (PDPM) Program sponsored by DOE and administered by the Argonne National Laboratory. Objectives of the PDPM Program are to evaluate nonaqueous methods of reprocessing spent fuel as a route to the development of proliferation-resistant and diversion-resistant methods for widespread use in the nuclear industry. Emphasis was placed on the literature indexed in the ERDA--DOE Energy Data Base (EDB). The bibliography includes indexes to authors, subject descriptors, EDB subject categories, and titles

  12. Pyrochemical and Dry Processing Methods Program. A selected bibliography

    Energy Technology Data Exchange (ETDEWEB)

    McDuffie, H.F.; Smith, D.H.; Owen, P.T.

    1979-03-01

    This selected bibliography with abstracts was compiled to provide information support to the Pyrochemical and Dry Processing Methods (PDPM) Program sponsored by DOE and administered by the Argonne National Laboratory. Objectives of the PDPM Program are to evaluate nonaqueous methods of reprocessing spent fuel as a route to the development of proliferation-resistant and diversion-resistant methods for widespread use in the nuclear industry. Emphasis was placed on the literature indexed in the ERDA--DOE Energy Data Base (EDB). The bibliography includes indexes to authors, subject descriptors, EDB subject categories, and titles.

  13. Program for searching for semiempirical parameters by the MNDO method

    International Nuclear Information System (INIS)

    Bliznyuk, A.A.; Voityuk, A.A.

    1987-01-01

    The authors describe an program for optimizing atomic models constructed using the MNDO method which varies not only the parameters but also the scope for simple changes in the calculation scheme. The target function determines properties such as formation enthalpies, dipole moments, ionization potentials, and geometrical parameters. Software used to minimize the target function is based on the simplex method on the Nelder-Mead algorithm and on the Fletcher variable-metric method. The program is written in FORTRAN IV and implemented on the ES computer

  14. Numerical methods of mathematical optimization with Algol and Fortran programs

    CERN Document Server

    Künzi, Hans P; Zehnder, C A; Rheinboldt, Werner

    1971-01-01

    Numerical Methods of Mathematical Optimization: With ALGOL and FORTRAN Programs reviews the theory and the practical application of the numerical methods of mathematical optimization. An ALGOL and a FORTRAN program was developed for each one of the algorithms described in the theoretical section. This should result in easy access to the application of the different optimization methods.Comprised of four chapters, this volume begins with a discussion on the theory of linear and nonlinear optimization, with the main stress on an easily understood, mathematically precise presentation. In addition

  15. Mass-selective Detection of Persistent Organic Pollutants by GC/MS Isolation, Concentration, Identification and Determination of Isomeric Spesific Composition of PCB in Natural and Drinking Waters of Dnieper River Basin in Kiev Region

    OpenAIRE

    Milyukin, Mikhail V.

    2002-01-01

    In concentrates of natural and drinking waters of Dnieper river basin in Kiev region with enrichment factor of 2,0⋅105–4,0⋅105 PCB (PCB524, PCB664, PCB1015, PCB1185, PCB1055, PCB1536, PCB1386, PCB1807, PCB2008) have been identified and their isomeric-specific composition (tetrachloro- – heptachloroisomers) has been determined at MDL level as low as 10–400 pg/L

  16. Computerization of the Electronic Scheme Drawing Equipment on Printed-Circuit-Board (PCB) Surface (Phase One)

    International Nuclear Information System (INIS)

    Abdul Hafid; Pinitoyo, A.; Demon H; Kussigit S; Paidjo; Riswan Dj; Natsir, M.; Dedy H; Edy Karyanta; Edy S

    2003-01-01

    To increase the capability of the PCB immersion machine developed previous a computerized drawing machine on PCB surface is proposed for drawing the schematic electronic, PROTEL software is used Used is Roland DXY 1100 type which had been modified to accommodate the PCB characteristic, because it is used originally for paper. Concerning, the plotter ink, the waterproof type must be used. (author)

  17. 40 CFR 761.298 - Decisions based on PCB concentration measurements resulting from sampling.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Decisions based on PCB concentration... Cleanup and On-Site Disposal of Bulk PCB Remediation Waste and Porous Surfaces in Accordance With § 761.61(a)(6) § 761.298 Decisions based on PCB concentration measurements resulting from sampling. (a) For...

  18. 40 CFR 761.316 - Interpreting PCB concentration measurements resulting from this sampling scheme.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Interpreting PCB concentration... § 761.79(b)(3) § 761.316 Interpreting PCB concentration measurements resulting from this sampling... composite is 20 µg/100 cm2, then the entire 9.5 square meters has a PCB surface concentration of 20 µg/100...

  19. 40 CFR 261.8 - PCB wastes regulated under Toxic Substance Control Act.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false PCB wastes regulated under Toxic... (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION AND LISTING OF HAZARDOUS WASTE General § 261.8 PCB wastes regulated under Toxic Substance Control Act. The disposal of PCB-containing dielectric fluid and electric...

  20. 77 FR 13603 - Anniston PCB Superfund Site; Anniston, Calhoun County, AL; Correction

    Science.gov (United States)

    2012-03-07

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9644-2; CERCLA-04-2012-3763] Anniston PCB Superfund Site... FR 11533 (FRL-9637-7), EPA posted a Notice of Amended Settlement concerning the Anniston PCB... the settlement are available from Ms. Paula V. Painter. Submit your comments by Site name Anniston PCB...

  1. Effect van PCB's op de energiekosten van migratie en bloedparameters van Europese aal

    NARCIS (Netherlands)

    Ginneken, van V.J.T.; Palstra, A.P.; Nieveen, M.; Berg, van den J.H.J.; Murk, A.J.

    2005-01-01

    Er zijn nog steeds PCB's aanwezig in het ecosysteem (water en land). Als palingen 6000 km migreren, zullen ze hun vetreserves aanspreken en komen er giftige PCB's vrij in het lichaam. Daarnaast kan de embryonale ontwikkeling nadelig beïnvloed worden door ophoping van PCB's in dooiermateriaal.

  2. γIrradiation induced formation of PCB-solvent adducts in aliphatic solvents

    International Nuclear Information System (INIS)

    Lepine, F.; Milot, S.; Gagne, N.

    1990-01-01

    γIrradiation induced formation of PCB-solvent adducts was investigated as a model for PCB residues in irradiated food. Formation of cyclohexyl adducts of PCBs was found to be significant when pure PCB congeners and Aroclor mixture were irradiated in cyclohexane and cyclohexene. Reaction pathways were investigated, and the effects of oxygen and electron scavenger were studied

  3. Theoretical perspectives on the mechanism and kinetics of the OH radical-initiated gas-phase oxidation of PCB126 in the atmosphere

    International Nuclear Information System (INIS)

    Dang, Juan; Shi, Xiangli; Zhang, Qingzhu; Wang, Wenxing

    2015-01-01

    Polychlorinated biphenyls (PCBs) primarily exist in the gas phase in air and may undergo atmospheric oxidation degradations, particularly the oxidation reaction initiated by OH radicals. In this work, the mechanism of the OH radical-initiated atmospheric oxidation of the most toxic PCB congener 3,3′,4,4′,5-pentachlorobiphenyl (PCB126) was investigated by using quantum chemistry methods. The rate constants of the crucial elementary reactions were estimated by the Rice–Ramsperger–Kassel–Marcus (RRKM) theory. The oxidation products of the reaction of PCB126 with OH radicals include 3,3′,4,4′,5-pentachlorobiphenyl-ols, chlorophenols, 2,3,4,7,8-pentachlorodibenzofuran, 2,3,4,6,7-pentachlorodibenzofuran, dialdehydes, 3,3′,4,4′,5-pentachloro-5′-nitro-biphenyl, and 4,5-dichloro-2-nitrophenol. Particularly, the formation of polychlorinated dibenzofurans (PCDFs) from the atmospheric oxidation of PCBs is revealed for the first time. The overall rate constant of the OH addition reaction is 2.52 × 10 −13 cm 3 molecule −1 s −1 at 298 K and 1 atm. The atmospheric lifetime of PCB126 determined by OH radicals is about 47.08 days which indicates that PCB126 can be transported long distances from local to global scales. - Highlights: • A comprehensive mechanism of OH-initiated oxidation of PCB126 was investigated. • The formation of PCDFs from the oxidation of PCBs is determined for the first time. • The rate constants for key elementary reactions were estimated by the RRKM theory. • The atmospheric lifetime of PCB126 determined by OH radicals is about 47.08 days

  4. PCB in soils and estimated soil-air exchange fluxes of selected PCB congeners in the south of Sweden

    International Nuclear Information System (INIS)

    Backe, Cecilia; Cousins, Ian T.; Larsson, Per

    2004-01-01

    PCB concentrations were studied in different soils to determine the spatial variation over a region of approximately 11 000 km 2 . PCB congener pattern was used to illustrate the spatial differences, as shown by principal component analysis (PCA). The relationship to different soil parameters was studied. PCB concentrations in soil showed a large variation between sampling-areas with median concentrations ranging between 2.3 and 332 ng g -1 (dw). Highest concentrations were found at two sites with sandy soils, one with extremely high organic carbon content. Both sites were located on the west coast of southern Sweden. Soils with similar soil textures (i.e. sandy silt moraine) did not show any significant differences in PCB concentrations. PCB congener composition was shown to differ between sites, with congener patterns almost site-specific. PCB in air and precipitation was measured and the transfer of chemicals between the soil and air compartments was estimated. Soil-air fugacity quotient calculations showed that the PCBs in the soil consistently had a higher fugacity than the PCBs in the air, with a median quotient value of 2.7. The gaseous fluxes between soil and air were estimated using standard modelling equations and a net soil-air flux estimated by subtracting bulk deposition from gaseous soil-air fluxes. It was shown that inclusion of vertical sorbed phase transport of PCBs in the soil had a large effect on the direction of the net soil-air exchange fluxes. - Soil-air exchange of PCBs is investigated and modelled across Sweden

  5. 77 FR 48733 - Transitional Program for Covered Business Method Patents-Definitions of Covered Business Method...

    Science.gov (United States)

    2012-08-14

    ... Office 37 CFR Part 42 Transitional Program for Covered Business Method Patents--Definitions of Covered... Business Method Patents-- Definitions of Covered Business Method Patent and Technological Invention AGENCY... forth in detail the definitions of the terms ``covered business method patent'' and ``technological...

  6. A preliminary investigation of the environmental impact of a thermal power plant in relation to PCB contamination.

    Science.gov (United States)

    Gedik, Kadir; Imamoglu, Ipek

    2011-07-01

    The most significant application of polychlorinated biphenyls (PCBs) is in transformers and capacitors. Therefore, power plants are important suspected sources for entry of PCBs into the environment. In this context, the levels and distribution of PCBs in sediment, soil, ash, and sludge samples were investigated around Seyitömer thermal power plant, Kütahya, Turkey. Moreover, identity and contribution of PCB mixtures were predicted using the chemical mass balance (CMB) receptor model. United States Environmental Protection Agency methods were applied during sample preparation, extraction (3540C), cleanup (3660B, 3665A, 3630C), and analysis (8082A). ΣPCB concentrations in the region ranged from not detected to 385 ng/g dry weight, with relatively higher contamination in sediments in comparison to soil, sludge, and ash samples collected from around the power plant. Congener profiles of the sediment and soil samples show penta-, hexa-, and hepta-chlorobiphenyls as the major homolog groups. The results from the CMB model indicate that PCB contamination is largely due to Clophen A60/A40 and Aroclor 1254/1254(late)/1260 release into the sediment and sludge samples around the thermal power plant. Since there are no other sources of PCBs in the region and the identity of PCB sources estimated by the CMB model mirrors PCB mixtures contained in transformers formerly used in the plant, the environmental contamination observed especially in sediments is attributed to the power plant. Release of PCBs over time, as indicated by the significant concentrations observed even in surface samples, emphasizes the importance of the need for better environmental management.

  7. Calibration of PCB-132 Sensors in a Shock Tube

    Science.gov (United States)

    Berridge, Dennis C.; Schneider, Steven P.

    2012-01-01

    While PCB-132 sensors have proven useful for measuring second-mode instability waves in many hypersonic wind tunnels, they are currently limited by their calibration. Until now, the factory calibration has been all that was available, which is a single-point calibration at an amplitude three orders of magnitude higher than a second-mode wave. In addition, little information has been available about the frequency response or spatial resolution of the sensors, which is important for measuring high-frequency instability waves. These shortcomings make it difficult to compare measurements at different conditions and between different sensors. If accurate quantitative measurements could be performed, comparisons of the growth and breakdown of instability waves could be made in different facilities, possibly leading to a method of predicting the amplitude at which the waves break down into turbulence, improving transition prediction. A method for calibrating the sensors is proposed using a newly-built shock tube at Purdue University. This shock tube, essentially a half-scale version of the 6-Inch shock tube at the Graduate Aerospace Laboratories at Caltech, has been designed to attain a moderate vacuum in the driven section. Low driven pressures should allow the creation of very weak, yet still relatively thin shock waves. It is expected that static pressure rises within the range of second-mode amplitudes should be possible. The shock tube has been designed to create clean, planar shock waves with a laminar boundary layer to allow for accurate calibrations. Stronger shock waves can be used to identify the frequency response of the sensors out to hundreds of kilohertz.

  8. Effects of maternal exposure to estrogen and PCB on different life stages of Zebrafish (Danio rerio)

    Energy Technology Data Exchange (ETDEWEB)

    Olsson, Per-Erik; Westerlund, L; Billsson, K; Berg, A H [Umeaa Univ. (Sweden). Dept. of Cellular and Developmental Biology; Teh, S J; Hinton, D E [California Univ., Davis, CA (United States). Dept. of Anatomy, Physiology and Cell Biology; Tysklind, M [Umeaa Univ., (Sweden). Dept. of Environmental Chemistry; Nilsson, Jan; Eriksson, Lars-Ove [Swedish Univ. of Agricultural Sciences, Umeaa (Sweden). Dept. of Aquaculture

    1999-02-01

    PCBs have been found to impair both reproduction and development in fish. We have investigated the effects of 3 PCB congeners, 2,3,3`,4,4`,5,6-HpCB (PCB-190); 2,3,4,4`-TeCB (PCB-60); and 2,2`,4,6,6`-PeCB (PCB-104), and the estrogenic hormone 17{beta}-estradiol on fecundity, early life-stage mortality, gross morphology and histology of zebrafish (Danio rerio). While none of the studied substances reduced fecundity, they increased embryo and larval mortality. The most severe effects on viability were observed following treatment with 17{beta}-estradiol or the weakly estrogenic PCB-104. Following 17{beta}-estradiol or PCB-104 exposure, mortality continued through the yolksac absorption phase. PCB-60, on the other hand, resulted in mortality between the 30% epiboly stage and 75% epiboly stage. At the same time as embryos started to die, embryo development and hatching were delayed. PCB-190 showed only moderate effects on early-life stage mortality. The fish were reared until sexual maturation where after they were subjected to gross morphological and histological analyses. Changes in morphology were observed following PCB-104 and PCB-190 treatment. Both substances gave rise to craniofacial malformations while PCB-104 also led to lordosis in females and scoliosis in fish of both sexes. From histological analysis it was found that PCB-104 and 17{beta}-estradiol resulted in karyorrhexis and karyolysis in the kidney. Possible signs of bile stasis were observed following 17{beta}-estradiol and PCB-190 treatment. Some effects were observed on the gonads, including areas in the ovary showing atresia and limited failure of testicular spermatogenesis in 17{beta}-estradiol, PCB-104, and PCB-60 treated fish. While all studied substances resulted in effects on offspring, the observation that estrogenic substances are highly embryotoxic, raises concern that endocrine disrupting substances may severely reduce fish populations in polluted areas

  9. ROTAX: a nonlinear optimization program by axes rotation method

    International Nuclear Information System (INIS)

    Suzuki, Tadakazu

    1977-09-01

    A nonlinear optimization program employing the axes rotation method has been developed for solving nonlinear problems subject to nonlinear inequality constraints and its stability and convergence efficiency were examined. The axes rotation method is a direct search of the optimum point by rotating the orthogonal coordinate system in a direction giving the minimum objective. The searching direction is rotated freely in multi-dimensional space, so the method is effective for the problems represented with the contours having deep curved valleys. In application of the axes rotation method to the optimization problems subject to nonlinear inequality constraints, an improved version of R.R. Allran and S.E.J. Johnsen's method is used, which deals with a new objective function composed of the original objective and a penalty term to consider the inequality constraints. The program is incorporated in optimization code system SCOOP. (auth.)

  10. Biological remediation of polychlorinated biphenyls (PCB) in the ...

    African Journals Online (AJOL)

    ajl yemi

    2011-12-19

    Dec 19, 2011 ... This widespread contamination of air, soil and water by metals, chemicals and metalloids causes environmental concerns, ... basic structure of PCB according to Wiegel and Wu. (2000), is as shown in Figure. 1. ..... inability to understand the interaction between complex chemicals in addition to physical and ...

  11. ENVIRONMENTAL PCB AND PESTICIDE EXPOSURE AND RISK OF ENDOMETRIOSIS

    Science.gov (United States)

    Environmental PCB and Pesticide Exposure and Risk of EndometriosisGermaine M. Buck1, John M. Weiner2, Hebe Greizerstein3, Brian Whitcomb1, Enrique Schisterman1, Paul Kostyniak3, Danelle Lobdell4, Kent Crickard5, and Ralph Sperrazza51Epidemiology Branch, Division o...

  12. Evaluating a physician leadership development program - a mixed methods approach.

    Science.gov (United States)

    Throgmorton, Cheryl; Mitchell, Trey; Morley, Tom; Snyder, Marijo

    2016-05-16

    Purpose - With the extent of change in healthcare today, organizations need strong physician leaders. To compensate for the lack of physician leadership education, many organizations are sending physicians to external leadership programs or developing in-house leadership programs targeted specifically to physicians. The purpose of this paper is to outline the evaluation strategy and outcomes of the inaugural year of a Physician Leadership Academy (PLA) developed and implemented at a Michigan-based regional healthcare system. Design/methodology/approach - The authors applied the theoretical framework of Kirkpatrick's four levels of evaluation and used surveys, observations, activity tracking, and interviews to evaluate the program outcomes. The authors applied grounded theory techniques to the interview data. Findings - The program met targeted outcomes across all four levels of evaluation. Interview themes focused on the significance of increasing self-awareness, building relationships, applying new skills, and building confidence. Research limitations/implications - While only one example, this study illustrates the importance of developing the evaluation strategy as part of the program design. Qualitative research methods, often lacking from learning evaluation design, uncover rich themes of impact. The study supports how a PLA program can enhance physician learning, engagement, and relationship building throughout and after the program. Physician leaders' partnership with organization development and learning professionals yield results with impact to individuals, groups, and the organization. Originality/value - Few studies provide an in-depth review of evaluation methods and outcomes of physician leadership development programs. Healthcare organizations seeking to develop similar in-house programs may benefit applying the evaluation strategy outlined in this study.

  13. An Investigation on the Extraction and Quantitation of a Hexavalent Chromium in Acrylonitrile Butadiene Styrene Copolymer (ABS) and Printed Circuit Board (PCB) by Ion Chromatography Coupled with Inductively Coupled Plasma Atomic Emission Spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Sang Ho; Kim, Yu Na [Mokpo National University, Muan (Korea, Republic of)

    2012-06-15

    A hexavalent chromium (Cr (VI)) is one of the hazardous substances regulated by the RoHS. The determination of Cr (VI) in various polymers and printed circuit board (PCB) has been very important. In this study, the three different analytical methods were investigated for the determination of a hexavalent chromium in Acrylonitrile Butadiene Styrene copolymer (ABS) and PCB. The results by three analytical methods were obtained and compared. An analytical method by UV-Visible spectrometer has been generally used for the determination of Cr (VI) in a sample, but a hexavalent chromium should complex with diphenylcarbazide for the detection in the method. The complexation did make an adverse effect on the quantitative analysis of Cr (VI) in ABS. The analytical method using diphenylcarbazide was also not applicable to printed circuit board (PCB) because PCB contained lots of irons. The irons interfered with the analysis of hexavalent chromium because those also could complex with diphenylcarbazide. In this study, hexavalent chromiums in PCB have been separated by ion chromatography (IC), then directly and selectively detected by inductively coupled plasma atomic emission spectrometry (ICP-AES). The quantity of Cr (VI) in PCB was 0.1 mg/kg

  14. Preparation and Characterization of Lecithin-Nano Ni/Fe for Effective Removal of PCB77

    OpenAIRE

    Shu Ding; Lin Zhao; Yun Qi; Qian-qian Lv

    2014-01-01

    A kind of combined material (named lecithin-nano Ni/Fe) that is composed of lecithin and nanoscale Ni/Fe bimetal was synthesized via microemulsion method. The efficacy of such an original material was tested using 3,3′,4,4′-tetrachlorobiphenyl (PCB77) as target pollutant. A microemulsion system was optimized as template to prepare Ni/Fe nanoparticles, which was followed by an insite loading process with the deposition of lecithin carrier. It was proved by the characterization that subtle Ni/F...

  15. Static/dynamic Analysis and Optimization of Z-axis Stand of PCB CNC Drilling Machine*

    Directory of Open Access Journals (Sweden)

    Zhou Yanjun

    2016-01-01

    Full Text Available The finite element analysis is used for the static and dynamic analysis of the Z axis brace of PCB CNC drilling machine. With its results of maximum displacement deformation and von Mises stress and modal frequency, the defect of original design was found out. On such bases, a variety of optimization scheme is put forward and the best size of the Z axis brace is obtained by the performance comparison of the schemes. This method offers bases for the design and renovation of other machine tool components.

  16. Method and computer program product for maintenance and modernization backlogging

    Science.gov (United States)

    Mattimore, Bernard G; Reynolds, Paul E; Farrell, Jill M

    2013-02-19

    According to one embodiment, a computer program product for determining future facility conditions includes a computer readable medium having computer readable program code stored therein. The computer readable program code includes computer readable program code for calculating a time period specific maintenance cost, for calculating a time period specific modernization factor, and for calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. In another embodiment, a computer-implemented method for calculating future facility conditions includes calculating a time period specific maintenance cost, calculating a time period specific modernization factor, and calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. Other embodiments are also presented.

  17. Mathematical programming methods for large-scale topology optimization problems

    DEFF Research Database (Denmark)

    Rojas Labanda, Susana

    for mechanical problems, but has rapidly extended to many other disciplines, such as fluid dynamics and biomechanical problems. However, the novelty and improvements of optimization methods has been very limited. It is, indeed, necessary to develop of new optimization methods to improve the final designs......, and at the same time, reduce the number of function evaluations. Nonlinear optimization methods, such as sequential quadratic programming and interior point solvers, have almost not been embraced by the topology optimization community. Thus, this work is focused on the introduction of this kind of second...... for the classical minimum compliance problem. Two of the state-of-the-art optimization algorithms are investigated and implemented for this structural topology optimization problem. A Sequential Quadratic Programming (TopSQP) and an interior point method (TopIP) are developed exploiting the specific mathematical...

  18. PCB dechlorination hotspots and reductive dehalogenase genes in sediments from a contaminated wastewater lagoon.

    Science.gov (United States)

    Mattes, Timothy E; Ewald, Jessica M; Liang, Yi; Martinez, Andres; Awad, Andrew; Richards, Patrick; Hornbuckle, Keri C; Schnoor, Jerald L

    2017-08-12

    Polychlorinated biphenyls (PCBs) are a class of persistent organic pollutants that are distributed worldwide. Although industrial PCB production has stopped, legacy contamination can be traced to several different commercial mixtures (e.g., Aroclors in the USA). Despite their persistence, PCBs are subject to naturally occurring biodegradation processes, although the microbes and enzymes involved are poorly understood. The biodegradation potential of PCB-contaminated sediments in a wastewater lagoon located in Virginia (USA) was studied. Total PCB concentrations in sediments ranged from 6.34 to 12,700 mg/kg. PCB congener profiles in sediment sample were similar to Aroclor 1248; however, PCB congener profiles at several locations showed evidence of dechlorination. The sediment microbial community structure varied among samples but was dominated by Proteobacteria and Firmicutes. The relative abundance of putative dechlorinating Chloroflexi (including Dehalococcoides sp.) was 0.01-0.19% among the sediment samples, with Dehalococcoides sp. representing 0.6-14.8% of this group. Other possible PCB dechlorinators present included the Clostridia and the Geobacteraceae. A PCR survey for potential PCB reductive dehalogenase genes (RDases) yielded 11 sequences related to RDase genes in PCB-respiring Dehalococcoides mccartyi strain CG5 and PCB-dechlorinating D. mccartyi strain CBDB1. This is the first study to retrieve potential PCB RDase genes from unenriched PCB-contaminated sediments.

  19. Relationships between Atmospheric Transport Regimes and PCB Concentrations in the Air at Zeppelin, Spitsbergen.

    Science.gov (United States)

    Ubl, Sandy; Scheringer, Martin; Hungerbühler, Konrad

    2017-09-05

    Polychlorinated biphenyls (PCBs) are persistent hazardous chemicals that are still detected in the atmosphere and other environmental media, although their production has been banned for several decades. At the long-term monitoring site, Zeppelin at Spitsbergen, different PCB congeners have been continuously measured for more than a decade. However, it is not clear what factors determine the seasonal and interannual variability of different (lighter versus heavier) PCB congeners. To investigate the influence of atmospheric transport patterns on PCB-28 and PCB-101 concentrations at Zeppelin, we applied the Lagrangian Particle Dispersion Model FLEXPART and calculated "footprints" that indicate the potential source regions of air arriving at Zeppelin. By means of a cluster analysis, we assigned groups of similar footprints to different transport regimes and analyzed the PCB concentrations according to the transport regimes. The concentrations of both PCB congeners are affected by the different transport regimes. For PCB-101, the origin of air masses from the European continent is primarily related to high concentrations; elevated PCB-101 concentrations in winter can be explained by the high frequency of this transport regime in winter, whereas PCB-101 concentrations are low when air is arriving from the oceans. For PCB-28, in contrast, concentrations are high during summer when air is mainly arriving from the oceans but low when air is arriving from the continents. The most likely explanation of this finding is that local emissions of PCB-28 mask the effect of long-range transport and determine the concentrations measured at Zeppelin.

  20. Studies on the distribution of 14C-labelled PCB in the body, 4

    International Nuclear Information System (INIS)

    Nagao, Soshichi; Hosoya, Hideo

    1976-01-01

    This paper is a report of 14 C-PCB distribution series in animals. We reported the results of the distribution of 14 C-PCB from birds, fish and shell in the previous experiments, and we have obtained some results from present experiment. This time interperito neal injection of 14 C-PCB solution was carried to mice, and the results were as follows; Excretion of 14 C-PCB as radioactivity was at its maximum about 6 hr. after medication. Excretive ratio was 87.20% for 24 hr, but 72.43% of radioactivity was excreted within 12hr. The result of radiopaperchromatography showed that 14 C-PCB was not changeable in the fecus after medication, being Rf = 0.92 in comparison with standard 14 C-PCB. 14 C-PCB distributed throughout the body of mice in 24 hr. and at least remained over till 480 hr. in adipose tissues of mice after single medication. (auth.)

  1. Relaxation and decomposition methods for mixed integer nonlinear programming

    CERN Document Server

    Nowak, Ivo; Bank, RE

    2005-01-01

    This book presents a comprehensive description of efficient methods for solving nonconvex mixed integer nonlinear programs, including several numerical and theoretical results, which are presented here for the first time. It contains many illustrations and an up-to-date bibliography. Because on the emphasis on practical methods, as well as the introduction into the basic theory, the book is accessible to a wide audience. It can be used both as a research and as a graduate text.

  2. Assessment of the Polychlorinated Biphenyl (PCB Occurrence in Copper Sulfates and the Influential Role of PCB Levels on Grapes.

    Directory of Open Access Journals (Sweden)

    Xiaomin Li

    Full Text Available Copper sulfates (CuSO4 are widely used as the primary component of fungicides in the grape industry. The agricultural-grade CuSO4 that we collected from Chinese nationwide markets were found to be contaminated by polychlorinated dibenzo-p-dioxins and dibenzofurans and high levels of polychlorinated biphenyls (Σ19PCBs: 0.32~9.51 ng/g. In the following research, we studied the impact of CuSO4 application on PCB levels in grape products through a field experiment, and conducted a national survey to speculate the role that CuSO4 played on the occurrence of PCB in grapes. In the field experiment, an obvious increase of PCBs in grape leaves (from 174 to 250 pg/g fw was observed after Bordeaux mixture (the main component of which is CuSO4 application. As to the main PCB congener in CuSO4, the most toxic CB 126 (toxic equivalency factor = 0.1 also increased in grape peels (from 1.66 to 2.93 pg/g fw after pesticide spray. Both the correlation study and the principal component analysis indicated that environmental factors were dominant PCB contributors to grapes, and grapes from e-waste dismantling area containing the highest PCBs also proved the notion. It is worth noting that this report describes the first research examining PCBs in CuSO4 and its influence on agricultural products to date.

  3. Bioaccumulation of PCB Contaminants in Five Fish Species in Utah Lake as Affected by Carp Removal

    Science.gov (United States)

    Sanjinez-Guzmán, V. A.; Cadet, E. L.; Crandall, T.; Chamberlain, T.; Rakotoarisaona, H.; Morris, P.

    2017-12-01

    State reports published by the Utah Department of Health (2005) and the Utah Department of Water Quality (2008) determined that there were elevated levels of PCBs (Polychlorinated biphenyls) that exceeded the EPA's cancer (0.02 𝑚𝑔 𝑘𝑔-1) and non-cancer screening levels (0.08 𝑚𝑔 𝑘𝑔-1) in two fish species from Utah Lake, the Common Carp (Cyprinus carpio) and the Channel Catfish (Ictalurus punctatus). Fish consumption advisories were issued for both of these fish species due to their health effects of PCBs. The Common Carp is a non-native predatory species that comprise 90% of the biomass in Utah Lake. As of September 2009, an extensive carp removal program was instituted by the Department of Natural Resources and began the removal of 75% of the carp population. The purpose of this study is to assess the impact of carp removal on PCB levels in five sport fish species consumed by Utah citizens. The fish being analyzed are the Common Carp (Cyprinus carpio), Channel Catfish (Ictalurus punctatus), Black Bullhead (Ameiurus melas), Walleye (Sander vitreus), and White Bass (Morone chrysops). One-hundred twenty (120) fish were collected from Utah Lake and subcategorized by their gender, tissue type (fillet and offal), weight, and size: small (under 33 cm), medium (33 cm - 43 cm), and large (greater than 43 cm). This was done in order to determine the variation of contaminant levels in each subcategory. PCB analysis was performed by Utility Testing Laboratory in Salt Lake City, Utah. Results show there has been a significant increase in PCB levels in all fish species in comparison with the state reports (2008). All fish species have exceeded the EPA cancer screening level, except for the fillet tissue of the White Bass species. In Common Carp fillet, and offal decreased concentrations of 11.80% and 23.72%, respectively. In Channel catfish: the PCB levels in the fillet increase by 87.93%, however, the offal levels

  4. Study program for constant current capacitor charging method

    Energy Technology Data Exchange (ETDEWEB)

    Pugh, C.

    1978-10-04

    The objective of the study program was to determine the best method of charging 20,000 to 132,000 microfarads of capacitance to 22 kVdc in 14 to 15 sec. Component costs, sizes, weights, line current graphs, copies of calculations and manufacturer's data are included.

  5. Dynamic Frames Based Verification Method for Concurrent Java Programs

    NARCIS (Netherlands)

    Mostowski, Wojciech

    2016-01-01

    In this paper we discuss a verification method for concurrent Java programs based on the concept of dynamic frames. We build on our earlier work that proposes a new, symbolic permission system for concurrent reasoning and we provide the following new contributions. First, we describe our approach

  6. Heuristic Methods of Integer Programming and Its Applications in Economics

    Directory of Open Access Journals (Sweden)

    Dominika Crnjac Milić

    2010-12-01

    Full Text Available A short overview of the results related to integer programming is described in the introductory part of this paper. Furthermore, there is a list of literature related to this field. The main part of the paper analyses the Heuristic method which yields a very fast result without the use of significant mathematical tools.

  7. Path Following in the Exact Penalty Method of Convex Programming.

    Science.gov (United States)

    Zhou, Hua; Lange, Kenneth

    2015-07-01

    Classical penalty methods solve a sequence of unconstrained problems that put greater and greater stress on meeting the constraints. In the limit as the penalty constant tends to ∞, one recovers the constrained solution. In the exact penalty method, squared penalties are replaced by absolute value penalties, and the solution is recovered for a finite value of the penalty constant. In practice, the kinks in the penalty and the unknown magnitude of the penalty constant prevent wide application of the exact penalty method in nonlinear programming. In this article, we examine a strategy of path following consistent with the exact penalty method. Instead of performing optimization at a single penalty constant, we trace the solution as a continuous function of the penalty constant. Thus, path following starts at the unconstrained solution and follows the solution path as the penalty constant increases. In the process, the solution path hits, slides along, and exits from the various constraints. For quadratic programming, the solution path is piecewise linear and takes large jumps from constraint to constraint. For a general convex program, the solution path is piecewise smooth, and path following operates by numerically solving an ordinary differential equation segment by segment. Our diverse applications to a) projection onto a convex set, b) nonnegative least squares, c) quadratically constrained quadratic programming, d) geometric programming, and e) semidefinite programming illustrate the mechanics and potential of path following. The final detour to image denoising demonstrates the relevance of path following to regularized estimation in inverse problems. In regularized estimation, one follows the solution path as the penalty constant decreases from a large value.

  8. Nuclear methods - an integral part of the NBS certification program

    International Nuclear Information System (INIS)

    Gills, T.E.

    1984-01-01

    Within the past twenty years, new techniques and methods have emerged in response to new technologies that are based upon the performance of high-purity and well-characterized materials. The National Bureau of Standards, through its Standard Reference Materials (SRM's) Program, provides standards in the form of many of these materials to ensure accuracy and the compatibility of measurements throughout the US and the world. These standards, defined by the National Bureau of Standards as Standard Reference Materials (SRMs), are developed by using state-of-the-art methods and procedures for both preparation and analysis. Nuclear methods-activation analysis constitute an integral part of that analysis process

  9. Estimation of uptake rate constants for PCB congeners accumulated by semipermeable membrane devices and brown treat (Salmo trutta)

    Science.gov (United States)

    Meadows, J.C.; Echols, K.R.; Huckins, J.N.; Borsuk, F.A.; Carline, R.F.; Tillitt, D.E.

    1998-01-01

    The triolein-filled semipermeable membrane device (SPMD) is a simple and effective method of assessing the presence of waterborne hydrophobic chemicals. Uptake rate constants for individual chemicals are needed to accurately relate the amounts of chemicals accumulated by the SPMD to dissolved water concentrations. Brown trout and SPMDs were exposed to PCB- contaminated groundwater in a spring for 28 days to calculate and compare uptake rates of specific PCB congeners by the two matrixes. Total PCB congener concentrations in water samples from the spring were assessed and corrected for estimated total organic carbon (TOC) sorption to estimate total dissolved concentrations. Whole and dissolved concentrations averaged 4.9 and 3.7 ??g/L, respectively, during the exposure. Total concentrations of PCBs in fish rose from 0.06 to 118.3 ??g/g during the 28-day exposure, while concentrations in the SPMD rose from 0.03 to 203.4 ??g/ g. Uptake rate constants (k1) estimated for SPMDs and brown trout were very similar, with k1 values for SPMDs ranging from one to two times those of the fish. The pattern of congener uptake by the fish and SPMDs was also similar. The rates of uptake generally increased or decreased with increasing K(ow), depending on the assumption of presence or absence of TOC.The triolein-filled semipermeable membrane device (SPMD) is a simple and effective method of assessing the presence of waterborne hydrophobic chemicals. Uptake rate constants for individual chemicals are needed to accurately relate the amounts of chemicals accumulated by the SPMB to dissolved water concentrations. Brown trout and SPMDs were exposed to PCB-contaminated groundwater in a spring for 28 days to calculate and compare uptake rates of specific PCB congeners by the two matrixes. Total PCB congener concentrations in water samples from the spring were assessed and corrected for estimated total organic carbon (TOC) sorption to estimate total dissolved concentrations. Whole and

  10. New Jersey's residential radon remediation program - methods and experience

    International Nuclear Information System (INIS)

    Pluta, T.A.; Cosolita, F.J.; Rothfuss, E.

    1986-01-01

    As part of a remedial action program to decontaminate over 200 residential properties, 12 typical properties were selected and a demonstration program was initiated in the spring of 1985. The residences selected represented a range of contamination levels and configurations and differing architectural styles representative of the age of construction. The physical limitations of the sites and the overall nature of a decontamination project in active residential communities imposed a number of severe restrictions on work methods and equipment. Regulations governing transportation and disposal set virtually zero defect standards for the condition of containers. The intrusive nature of the work in residential neighborhoods required continual interaction with local residents, public officials and citizen task forces. Media coverage was very high. Numerous briefings were held to allay fears and promote public understanding. Numerous issues ranging in content from public health and safety to engineering and construction methods arose during the remedial action program. These issues were resolved by a multi-disciplined management team which was knowledgeable in public administration, radiation physics, and engineering design and construction. This paper discusses the nature of the problem, the methods applied to resolve the problem and the experience gained as a result of a remedial action program

  11. Polyhedral and semidefinite programming methods in combinatorial optimization

    CERN Document Server

    Tunçel, Levent

    2010-01-01

    Since the early 1960s, polyhedral methods have played a central role in both the theory and practice of combinatorial optimization. Since the early 1990s, a new technique, semidefinite programming, has been increasingly applied to some combinatorial optimization problems. The semidefinite programming problem is the problem of optimizing a linear function of matrix variables, subject to finitely many linear inequalities and the positive semidefiniteness condition on some of the matrix variables. On certain problems, such as maximum cut, maximum satisfiability, maximum stable set and geometric r

  12. Response Matrix Method Development Program at Savannah River Laboratory

    International Nuclear Information System (INIS)

    Sicilian, J.M.

    1976-01-01

    The Response Matrix Method Development Program at Savannah River Laboratory (SRL) has concentrated on the development of an effective system of computer codes for the analysis of Savannah River Plant (SRP) reactors. The most significant contribution of this program to date has been the verification of the accuracy of diffusion theory codes as used for routine analysis of SRP reactor operation. This paper documents the two steps carried out in achieving this verification: confirmation of the accuracy of the response matrix technique through comparison with experiment and Monte Carlo calculations; and establishment of agreement between diffusion theory and response matrix codes in situations which realistically approximate actual operating conditions

  13. Integrated Data Collection Analysis (IDCA) Program - SSST Testing Methods

    Energy Technology Data Exchange (ETDEWEB)

    Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Geoffrey W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Preston, Daniel N. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pollard, Colin J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Remmers, Daniel L. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Sorensen, Daniel N. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Whinnery, LeRoy L. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Phillips, Jason J. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Shelley, Timothy J. [Bureau of Alcohol, Tobacco and Firearms (ATF), Huntsville, AL (United States); Reyes, Jose A. [Applied Research Associates, Tyndall AFB, FL (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2013-03-25

    The Integrated Data Collection Analysis (IDCA) program is conducting a proficiency study for Small- Scale Safety and Thermal (SSST) testing of homemade explosives (HMEs). Described here are the methods used for impact, friction, electrostatic discharge, and differential scanning calorimetry analysis during the IDCA program. These methods changed throughout the Proficiency Test and the reasons for these changes are documented in this report. The most significant modifications in standard testing methods are: 1) including one specified sandpaper in impact testing among all the participants, 2) diversifying liquid test methods for selected participants, and 3) including sealed sample holders for thermal testing by at least one participant. This effort, funded by the Department of Homeland Security (DHS), is putting the issues of safe handling of these materials in perspective with standard military explosives. The study is adding SSST testing results for a broad suite of different HMEs to the literature. Ultimately the study will suggest new guidelines and methods and possibly establish the SSST testing accuracies needed to develop safe handling practices for HMEs. Each participating testing laboratory uses identical test materials and preparation methods wherever possible. The testing performers involved are Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Indian Head Division, Naval Surface Warfare Center, (NSWC IHD), Sandia National Laboratories (SNL), and Air Force Research Laboratory (AFRL/RXQL). These tests are conducted as a proficiency study in order to establish some consistency in test protocols, procedures, and experiments and to compare results when these testing variables cannot be made consistent.

  14. Dioxin-like PCB in indoor air contaminated with different sources

    Energy Technology Data Exchange (ETDEWEB)

    Heinzow, B.G.J.; Mohr, S.; Ostendorp, G. [Landesamt fuer Gesundheit und Arbeitssicherheit des Landes Schleswig-Holstein, Flintbek (Germany); Kerst, M.; Koerner, W. [Bayerisches Landesamt fuer Umweltschutz, Augsburg (Germany)

    2004-09-15

    Polychlorinated biphenyls (PCB) have been used in public building constructions for various purposes in the 1960s and 1970s, mainly as an additive to concrete, caulking, grout, paints, as a major constitutent of permanent elastic Thiokol rubber sealants and flame retardant coatings of acoustic ceiling tiles. Offgazing of semivolatile PCB from building materials can nowadays still result in considerable house-dust contamination and in indoor air concentrations exceeding 10,000 ng/m{sup 3}. In Germany, PCB levels in indoor air in non-occupational settings have been regulated with a tolerable total PCB concentration of 300 ng /m{sup 3} and an intervention level of 3000 ng/m{sup 3}. Lower re-entry criteria have been proposed by Michaud et al. Technical mixtures of PCB contain dioxin-like non- and mono-ortho substituted PCB congeners and are contaminated with trace amounts of polychlorinated dibenzodioxins (PCDD) and mainly dibenzofurans (PCDF), sharing overlapping toxic effects and physicochemical properties. We report here on levels of dioxinlike PCB measured in buildings with various PCB sources and correlations among PCDD/PCDF and dioxin-like PCB and di-ortho PCB.

  15. Reference standards for quantitative trace analysis of PCB's by GC. Technical PCB formulations for the calibration of ECD and MSD responses

    NARCIS (Netherlands)

    Krupcik, J.; Kocan, A.; Petrik, J.; Leclercq, P.A.; Ballschmiter, K.

    1993-01-01

    The compn. of any tech. PCB formulation can be detd. directly by analyzing the PCB sample by gas chromatog. with a flame ionization detector (GC-FID), provided the relative mol. masses of the components are known. The responses of electron capture and selected-ion monitoring, mass-spectra detectors

  16. Differences in energy expenditures and growth dilution explain higher PCB concentrations in male summer flounder

    Science.gov (United States)

    Madenjian, Charles P.; Jensen, Olaf P.; Rediske, Richard R.; O'Keefe, James P.; Vastano, Anthony R.; Pothoven, Steven A.

    2016-01-01

    Comparison of polychlorinated biphenyl (PCB) concentrations between the sexes of mature fish may reveal important behavioral and physiological differences between the sexes. We determined whole-fish PCB concentrations in 23 female summer flounder Paralichthys dentatus and 27 male summer flounder from New Jersey coastal waters. To investigate the potential for differences in diet or habitat utilization between the sexes, carbon and nitrogen stable isotope ratios were also determined. In 5 of the 23 female summer flounder, PCB concentrations in the somatic tissue and ovaries were determined. In addition, we used bioenergetics modeling to assess the contribution of the growth dilution effect to the observed difference in PCB concentrations between the sexes. Whole-fish PCB concentrations for females and males averaged 87 and 124 ng/g, respectively; thus males were 43% higher in PCB concentration compared with females. Carbon and nitrogen stable isotope ratios did not significantly differ between the sexes, suggesting that diet composition and habitat utilization did not vary between the sexes. Based on PCB determinations in the somatic tissue and ovaries, we predicted that PCB concentration of females would increase by 0.6%, on average, immediately after spawning due to release of eggs. Thus, the change in PCB concentration due to release of eggs did not explain the higher PCB concentrations observed in males. Bioenergetics modeling results indicated that the growth dilution effect could account for males being 19% higher in PCB concentration compared with females. Thus, the bulk of the observed difference in PCB concentrations between the sexes was not explained by growth dilution. We concluded that a higher rate of energy expenditure in males, stemming from greater activity and a greater resting metabolic rate, was most likely the primary driver for the observed difference in PCB concentrations between the sexes.

  17. Differences in Energy Expenditures and Growth Dilution Explain Higher PCB Concentrations in Male Summer Flounder.

    Directory of Open Access Journals (Sweden)

    Charles P Madenjian

    Full Text Available Comparison of polychlorinated biphenyl (PCB concentrations between the sexes of mature fish may reveal important behavioral and physiological differences between the sexes. We determined whole-fish PCB concentrations in 23 female summer flounder Paralichthys dentatus and 27 male summer flounder from New Jersey coastal waters. To investigate the potential for differences in diet or habitat utilization between the sexes, carbon and nitrogen stable isotope ratios were also determined. In 5 of the 23 female summer flounder, PCB concentrations in the somatic tissue and ovaries were determined. In addition, we used bioenergetics modeling to assess the contribution of the growth dilution effect to the observed difference in PCB concentrations between the sexes. Whole-fish PCB concentrations for females and males averaged 87 and 124 ng/g, respectively; thus males were 43% higher in PCB concentration compared with females. Carbon and nitrogen stable isotope ratios did not significantly differ between the sexes, suggesting that diet composition and habitat utilization did not vary between the sexes. Based on PCB determinations in the somatic tissue and ovaries, we predicted that PCB concentration of females would increase by 0.6%, on average, immediately after spawning due to release of eggs. Thus, the change in PCB concentration due to release of eggs did not explain the higher PCB concentrations observed in males. Bioenergetics modeling results indicated that the growth dilution effect could account for males being 19% higher in PCB concentration compared with females. Thus, the bulk of the observed difference in PCB concentrations between the sexes was not explained by growth dilution. We concluded that a higher rate of energy expenditure in males, stemming from greater activity and a greater resting metabolic rate, was most likely the primary driver for the observed difference in PCB concentrations between the sexes.

  18. A Sequential Quadratically Constrained Quadratic Programming Method of Feasible Directions

    International Nuclear Information System (INIS)

    Jian Jinbao; Hu Qingjie; Tang Chunming; Zheng Haiyan

    2007-01-01

    In this paper, a sequential quadratically constrained quadratic programming method of feasible directions is proposed for the optimization problems with nonlinear inequality constraints. At each iteration of the proposed algorithm, a feasible direction of descent is obtained by solving only one subproblem which consist of a convex quadratic objective function and simple quadratic inequality constraints without the second derivatives of the functions of the discussed problems, and such a subproblem can be formulated as a second-order cone programming which can be solved by interior point methods. To overcome the Maratos effect, an efficient higher-order correction direction is obtained by only one explicit computation formula. The algorithm is proved to be globally convergent and superlinearly convergent under some mild conditions without the strict complementarity. Finally, some preliminary numerical results are reported

  19. Eco Logic signs deal to destroy Japanese PCB stocks

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    According to a recent announcement, Eco Logic of Rockwood, Ontario, has entered into a partnership with the Japanese companies Tokyo Boeki and Nippon Sharyo for the destruction of stockpiled PCB materials in Japan, using Eco Logic's non-incineration technology. The deal is reported to be worth about $50 million in revenues to Eco Logic, spread over the next few years. The agreement includes provisions for the Japanese companies to purchase, or manufacture under licence, a number of Eco Logic's gas phase chemical reduction processing units to serve the Japanese market. In exchange for exclusive rights to the Japanese market, Eco Logic will receive license fees and royalties of up to nine per cent for the use of its process. Eco Logic is currently building a demonstration unit under contract with the two Japanese companies. The Japanese PCB waste destruction market is estimated to be worth as much as $400 million. Incineration, the conventional form of disposal, is strongly opposed by local governments

  20. Vapor solvent decontamination of PCB [polychlorinated biphenyls] transformer components

    International Nuclear Information System (INIS)

    Green, G.R.; Green, G.R.

    1992-01-01

    A process is provided to recover reclaimable material from discarded transformers containing PCB (polychlorinated biphenyl) insulating oils and to minimize the volume of materials which are subject to environmental regulation upon disposal. According to the invention, the transformer is drained and given an initial cleaning. The internal parts are removed and cleaned a second time as is the empty transformer casing. Recoverable materials such as aluminum and copper are cleaned to less than 10 μg of PCB per 100 cm 2 , allowing these materials to be recycled rather than buried. Almost all of the remaining nonmetallic materials are combustible solids or liquids which can be destroyed by incineration. The cleaning is accomplished using trichloroethylene solvent, chosen for its low boiling point which makes it easy to recycle using an isothermal separator. The removed transformer parts are cleaned in a secondary cleaning station consisting of 3 separate sections including tumbling baskets. 2 figs

  1. Next Generation Nuclear Plant Methods Technical Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    Richard R. Schultz; Abderrafi M. Ougouag; David W. Nigg; Hans D. Gougar; Richard W. Johnson; William K. Terry; Chang H. Oh; Donald W. McEligot; Gary W. Johnsen; Glenn E. McCreery; Woo Y. Yoon; James W. Sterbentz; J. Steve Herring; Temitope A. Taiwo; Thomas Y. C. Wei; William D. Pointer; Won S. Yang; Michael T. Farmer; Hussein S. Khalil; Madeline A. Feltus

    2010-12-01

    One of the great challenges of designing and licensing the Very High Temperature Reactor (VHTR) is to confirm that the intended VHTR analysis tools can be used confidently to make decisions and to assure all that the reactor systems are safe and meet the performance objectives of the Generation IV Program. The research and development (R&D) projects defined in the Next Generation Nuclear Plant (NGNP) Design Methods Development and Validation Program will ensure that the tools used to perform the required calculations and analyses can be trusted. The Methods R&D tasks are designed to ensure that the calculational envelope of the tools used to analyze the VHTR reactor systems encompasses, or is larger than, the operational and transient envelope of the VHTR itself. The Methods R&D focuses on the development of tools to assess the neutronic and thermal fluid behavior of the plant. The fuel behavior and fission product transport models are discussed in the Advanced Gas Reactor (AGR) program plan. Various stress analysis and mechanical design tools will also need to be developed and validated and will ultimately also be included in the Methods R&D Program Plan. The calculational envelope of the neutronics and thermal-fluids software tools intended to be used on the NGNP is defined by the scenarios and phenomena that these tools can calculate with confidence. The software tools can only be used confidently when the results they produce have been shown to be in reasonable agreement with first-principle results, thought-problems, and data that describe the “highly ranked” phenomena inherent in all operational conditions and important accident scenarios for the VHTR.

  2. Next Generation Nuclear Plant Methods Technical Program Plan -- PLN-2498

    Energy Technology Data Exchange (ETDEWEB)

    Richard R. Schultz; Abderrafi M. Ougouag; David W. Nigg; Hans D. Gougar; Richard W. Johnson; William K. Terry; Chang H. Oh; Donald W. McEligot; Gary W. Johnsen; Glenn E. McCreery; Woo Y. Yoon; James W. Sterbentz; J. Steve Herring; Temitope A. Taiwo; Thomas Y. C. Wei; William D. Pointer; Won S. Yang; Michael T. Farmer; Hussein S. Khalil; Madeline A. Feltus

    2010-09-01

    One of the great challenges of designing and licensing the Very High Temperature Reactor (VHTR) is to confirm that the intended VHTR analysis tools can be used confidently to make decisions and to assure all that the reactor systems are safe and meet the performance objectives of the Generation IV Program. The research and development (R&D) projects defined in the Next Generation Nuclear Plant (NGNP) Design Methods Development and Validation Program will ensure that the tools used to perform the required calculations and analyses can be trusted. The Methods R&D tasks are designed to ensure that the calculational envelope of the tools used to analyze the VHTR reactor systems encompasses, or is larger than, the operational and transient envelope of the VHTR itself. The Methods R&D focuses on the development of tools to assess the neutronic and thermal fluid behavior of the plant. The fuel behavior and fission product transport models are discussed in the Advanced Gas Reactor (AGR) program plan. Various stress analysis and mechanical design tools will also need to be developed and validated and will ultimately also be included in the Methods R&D Program Plan. The calculational envelope of the neutronics and thermal-fluids software tools intended to be used on the NGNP is defined by the scenarios and phenomena that these tools can calculate with confidence. The software tools can only be used confidently when the results they produce have been shown to be in reasonable agreement with first-principle results, thought-problems, and data that describe the “highly ranked” phenomena inherent in all operational conditions and important accident scenarios for the VHTR.

  3. Relaxation Methods for Strictly Convex Regularizations of Piecewise Linear Programs

    International Nuclear Information System (INIS)

    Kiwiel, K. C.

    1998-01-01

    We give an algorithm for minimizing the sum of a strictly convex function and a convex piecewise linear function. It extends several dual coordinate ascent methods for large-scale linearly constrained problems that occur in entropy maximization, quadratic programming, and network flows. In particular, it may solve exact penalty versions of such (possibly inconsistent) problems, and subproblems of bundle methods for nondifferentiable optimization. It is simple, can exploit sparsity, and in certain cases is highly parallelizable. Its global convergence is established in the recent framework of B -functions (generalized Bregman functions)

  4. SEASONAL INFLUENCES ON PCB RETENTION AND BIOTRANSFORMATION IN FISH

    Science.gov (United States)

    James, Margaret O.; Kleinow, Kevin M.

    2013-01-01

    There is extensive evidence that fish from waters with PCB-contaminated sediments accumulate PCBs and related chemicals, and that people who eat fish from contaminated waters have higher body burdens of PCBs and PCB metabolites than those who do not. PCBs and their metabolites are potentially toxic, thus it is important to human health to understand the uptake, biotransformation and elimination of PCBs in fish, since these processes determine the extent of accumulation. The intestinal uptake of PCBs present in the diet of fish into fish tissues is a process that is influenced by the lipid composition of the diet. Biotransformation of PCBs in fish, as in mammals, facilitates elimination, although many PCB congeners are recalcitrant to biotransformation in fish and mammals. Sequential biotransformation of PCBs by cytochrome P450 and conjugation pathways is even less efficient in fish than in mammalian species, thus contributing to the retention of PCBs in fish tissues. A very important factor influencing overall PCB disposition in fish is water temperature. Seasonal changes in water temperature produce adaptive physiological and biochemical changes in fish. While uptake of PCBs from the diet is similar in fish acclimated to winter or summer temperatures, there is evidence that elimination of PCBs occurs much more slowly when the fish is acclimated at low temperatures than at warmer temperatures. Research to date suggests that the processes of elimination of PCBs are modulated by several factors in fish including seasonal changes in water temperature. Thus, the body burden of PCBs in fish from a contaminated location is likely to vary with season. PMID:23494683

  5. Study of PCB degradation in real contaminated soil

    Czech Academy of Sciences Publication Activity Database

    Ryšlavá, E.; Krejčík, Zdeněk; Macek, Tomáš; Nováková, H.; Demnerová, K.; Macková, M.

    2003-01-01

    Roč. 2003, č. 12 (2003), s. 296-301 ISSN 1018-4619 R&D Projects: GA MŠk LN00A079; GA ČR GA526/01/1292 Grant - others:GA EU(XE) QLK3-CT-2001-00101 Institutional research plan: CEZ:AV0Z4055905; CEZ:AV0Z5052915 Keywords : Phytoremediation * rhizoremediation * PCB degradation Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 0.325, year: 2003

  6. Potential Impact of PCB's on Bluefish, Pomatomus saltatrix, Management

    OpenAIRE

    Eldridge, Peter J.; Meaburn, G. Malcolm

    1992-01-01

    Since 1979, anglers along the U.S. Atlantic coast have landed by weight more bluefish, Pomatomus saltatrix, than any other marine species. A fishery management plan has been developed jointly by three fishery management councils and the Atlantic States Marine Fisheries Commission to preserve the bluefish resource. Major objectives of the plan include prevention of recruitment overfishing and reduction in waste of bluefish. In 1985, a Federal survey found PCB concentrations in larger bluefish ...

  7. PCB-containing wood floor finish is a likely source of elevated PCBs in residents' blood, household air and dust: a case study of exposure

    Directory of Open Access Journals (Sweden)

    Seryak Liesel M

    2008-01-01

    Full Text Available Abstract Background Polychlorinated biphenyls (PCBs are persistent pollutants identified worldwide as human blood and breast milk contaminants. Because they bioaccumulate, consumption of meat, fish, and dairy products predicts human blood concentrations. PCBs were also used widely in building materials, including caulks and paints, but few studies have evaluated the contribution of these exposures to body burden. Methods In an earlier study, we detected PCBs in indoor air in 31% of 120 homes on Cape Cod, MA. Two of the homes had much higher concentrations than the rest, so we retested to verify the initial finding, evaluate blood PCB concentrations of residents, and identify the PCB source. Results Air and dust concentrations remained elevated over 5 years between initial and follow-up sampling. Blood serum concentrations of PCBs in residents of the homes were generally elevated above the 95th percentile of a representative sample of the US population. Serum concentrations in residents and air and dust concentrations were especially high in a home where a resident reported use of PCB-containing floor finish in the past, and where the floor of one room was sanded and refinished just prior to sample collection. Conclusion This case-study suggests that PCB residues in homes may be more significant contributors to overall exposure than diet for some people, and that use of a commercially-available PCB-containing wood floor finish in residences during the 1950s and 1960s is an overlooked but potentially important source of current PCB exposure in the general population.

  8. Methods and computer programs for PWR's fuel management: Programs Sothis and Ciclon

    International Nuclear Information System (INIS)

    Aragones, J.M.; Corella, M.R.; Martinez-Val, J.M.

    1976-01-01

    Methos and computer programs developed at JEN for fuel management in PWR are discussed, including scope of model, procedures for sistematic selection of alternatives to be evaluated, basis of model for neutronic calculation, methods for fuel costs calculation, procedures for equilibrium and trans[tion cycles calculation with Soth[s and Ciclon codes and validation of methods by comparison of results with others of reference (author) ' [es

  9. Correlation between human maternal-fetal placental transfer and molecular weight of PCB and dioxin congeners/isomers.

    Science.gov (United States)

    Mori, Chisato; Nakamura, Noriko; Todaka, Emiko; Fujisaki, Takeyoshi; Matsuno, Yoshiharu; Nakaoka, Hiroko; Hanazato, Masamichi

    2014-11-01

    Establishing methods for the assessment of fetal exposure to chemicals is important for the prevention or prediction of the child's future disease risk. In the present study, we aimed to determine the influence of molecular weight on the likelihood of chemical transfer from mother to fetus via the placenta. The correlation between molecular weight and placental transfer rates of congeners/isomers of polychlorinated biphenyls (PCBs) and dioxins was examined. Twenty-nine sample sets of maternal blood, umbilical cord, and umbilical cord blood were used to measure PCB concentration, and 41 sample sets were used to analyze dioxins. Placental transfer rates were calculated using the concentrations of PCBs, dioxins, and their congeners/isomers within these sample sets. Transfer rate correlated negatively with molecular weight for PCB congeners, normalized using wet and lipid weights. The transfer rates of PCB or dioxin congeners differed from those of total PCBs or dioxins. The transfer rate for dioxin congeners did not always correlate significantly with molecular weight, perhaps because of the small sample size or other factors. Further improvement of the analytical methods for dioxin congeners is required. The findings of the present study suggested that PCBs, dioxins, or their congeners with lower molecular weights are more likely to be transferred from mother to fetus via the placenta. Consideration of chemical molecular weight and transfer rate could therefore contribute to the assessment of fetal exposure. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. PCB transformer fires: the risk in nuclear power plants

    International Nuclear Information System (INIS)

    Blackmon, K.

    1988-01-01

    It is estimated that 1/2 of the present nuclear power plants operate with PCB-filled transformer equipment. In an attempt to obtain better estimates of clean-up costs in a nuclear power plant under reasonable-loss scenarios, a study was commissioned. This study was a joint venture between Blackmon-Mooring Steamatic Technologies, Inc., (BMS-TECH) and M and M Protection Consultants. This joint study was conducted at a typical pressurized-water reactor plant consisting of two 1000-MW units. Three specific scenarios were selected and analyzed for this typical power plant. These scenarios were: (1) an electrical failure of a transformer in an isolated switch gear room; (2) a transformer exposed to a 55-gallon transient combustion oil fire in the auxiliary building; and (3) a PCB transformer involved in a major turbine lube fire in the turbine building. Based on results of this study, the insurance carriers for this industry implemented an adjustment in their rate structures for nuclear power plants that have PCB equipment

  11. Modelling PCB bioaccumulation in a Baltic food web

    International Nuclear Information System (INIS)

    Nfon, Erick; Cousins, Ian T.

    2007-01-01

    A steady state model is developed to describe the bioaccumulation of organic contaminants by 14 species in a Baltic food web including pelagic and benthic aquatic organisms. The model is used to study the bioaccumulation of five PCB congeners of different chlorination levels. The model predictions are evaluated against monitoring data for five of the species in the food web. Predicted concentrations are on average within a factor of two of measured concentrations. The model shows that all PCB congeners were biomagnified in the food web, which is consistent with observations. Sensitivity analysis reveals that the single most sensitive parameter is log K OW . The most sensitive environmental parameter is the annual average temperature. Although not identified amongst the most sensitive input parameters, the dissolved concentration in water is believed to be important because of the uncertainty in its determination. The most sensitive organism-specific input parameters are the fractional respiration of species from the water column and sediment pore water, which are also difficult to determine. Parameters such as feeding rate, growth rate and lipid content of organism are only important at higher trophic levels. - The bioaccumulation behaviour of PCB congeners in a Baltic food web is studied using a novel mechanistic model

  12. FATAL, General Experiment Fitting Program by Nonlinear Regression Method

    International Nuclear Information System (INIS)

    Salmon, L.; Budd, T.; Marshall, M.

    1982-01-01

    1 - Description of problem or function: A generalized fitting program with a free-format keyword interface to the user. It permits experimental data to be fitted by non-linear regression methods to any function describable by the user. The user requires the minimum of computer experience but needs to provide a subroutine to define his function. Some statistical output is included as well as 'best' estimates of the function's parameters. 2 - Method of solution: The regression method used is based on a minimization technique devised by Powell (Harwell Subroutine Library VA05A, 1972) which does not require the use of analytical derivatives. The method employs a quasi-Newton procedure balanced with a steepest descent correction. Experience shows this to be efficient for a very wide range of application. 3 - Restrictions on the complexity of the problem: The current version of the program permits functions to be defined with up to 20 parameters. The function may be fitted to a maximum of 400 points, preferably with estimated values of weight given

  13. Assessment of questionnaire-based PCB exposure focused on food frequency in birth cohorts in Japan.

    Science.gov (United States)

    Eguchi, Akifumi; Otake, Masae; Hanazato, Masamichi; Suzuki, Norimichi; Matsuno, Yoshiharu; Nakaoka, Hiroko; Todaka, Emiko; Mori, Chisato

    2017-02-01

    We investigated the relationship between food frequency questionnaire (FFQ) responses and serum polychlorinated biphenyl (PCB) levels of mothers and fathers recruited from the Chiba Regional Center, which is one of the 15 regional centers of the Japan Environment and Children's Study (mothers: n = 1477, fathers: n = 219). The expected PCB values were estimated from the participants' FFQ answers and medical records (age, body mass index and number of deliveries). Based on the stepwise forward selection results of Bayesian regression models, age and fish and egg consumption were positively associated with PCB concentrations and a number of deliveries were negatively associated with PCB concentrations in mothers, whereas only age was positively associated with PCB concentrations in fathers.These findings indicated that the estimation of daily dietary intake may be useful for the prediction of PCB concentration for mothers.

  14. Electroremediation of PCB contaminated soil combined with iron nanoparticles: Effect of the soil type

    DEFF Research Database (Denmark)

    Gomes, Helena I.; Dias-Ferreira, Celia; Ottosen, Lisbeth M.

    2015-01-01

    Polychlorinated biphenyls (PCB) are carcinogenic and persistent organic pollutants that accumulate in soils and sediments. Currently, there is no cost-effective and sustainable remediation technology for these contaminants. In this work, a new combination of electrodialytic remediation and zero...... nanoparticles. Remediation experiments are made with two different historically PCB contaminated soils, which differ in both soil composition and contamination source. Soil 1 is a mix of soils with spills of transformer oils, while Soil 2 is a superficial soil from a decommissioned school where PCB were used...... as windows sealants. Saponin, a natural surfactant, was also tested to increase the PCB desorption from soils and enhance dechlorination. Remediation of Soil 1 (with highest pH, carbonate content, organic matter and PCB concentrations) obtained the maximum 83% and 60% PCB removal with the two...

  15. Program-target methods of management small business

    Directory of Open Access Journals (Sweden)

    Gurova Ekaterina

    2017-01-01

    Full Text Available Experience of small businesses in Russia are just beginning their path to development. difficulties arise with the involvement of small businesses in the implementation of government development programmes. Small business in modern conditions to secure a visible prospect of development without the implementation of state support programmes. Ways and methods of regulation of development of the market economy are diverse. The total mass of the huge role is played by the program-target methods of regulation. The article describes the basic principles on the use of program-target approach to the development of a specific sector of the economy, as small businesses, designed to play an important role in getting the national economy out of crisis. The material in this publication is built from the need to maintain the connection between the theory of government regulation, practice of formation of development programs at the regional level and the needs of small businesses. Essential for the formation of entrepreneurship development programmes is to preserve the flexibility of small businesses in making management decisions related to the selection and change of activities.

  16. PCB concentrations in Pere Marquette River and Muskegon River watersheds, 2002

    Science.gov (United States)

    Fogarty, Lisa R.

    2005-01-01

    the child. Rule 323.1057 (Toxic Substances) of the Part 4. Water Quality Standards gives procedure for calculating water-quality values to protect human, wildlife and aquatic life. For total PCB, the applicable Rule 57 water-quality value is the human cancer value (HCV=0.26 ng/L),In 2002, U. S. Geological Survey (USGS) and Michigan Department of Environmental Quality (MDEQ) cooperatively planned and executed a monitoring program for PCBs in water and sediment from the Pere Marquette River and Muskegon River watersheds. The Pere Marquette and Muskegon River are in the west central part of Michigan's Lower Peninsula (fig. 1). The Pere Marquette River watershed is about 750 square miles, and the Muskegon River is about 2700 square miles. Both rivers are popular recreational waters, and the Pere Marquette River is a Michigan designated Natural River (Part 305 of the Natural Rivers and Environmental Protection Act 451 of 1994).

  17. ENVIRONMENTAL PCB EXPOSURE AND RISK OF ENDOMETRIOSIS

    Science.gov (United States)

    BACKGROUND: Hormonally active environmental agents recently have been associated with the development of endometriosis. METHODS: We undertook a study to assess the relation between endometriosis, an estrogen dependent gynecologic disease, and 62 individual polychlorinated biphe...

  18. Purpose and methods of a Pollution Prevention Awareness Program

    Energy Technology Data Exchange (ETDEWEB)

    Flowers, P.A.; Irwin, E.F.; Poligone, S.E.

    1994-08-15

    The purpose of the Pollution Prevention Awareness Program (PPAP), which is required by DOE Order 5400.1, is to foster the philosophy that prevention is superior to remediation. The goal of the program is to incorporate pollution prevention into the decision-making process at every level throughout the organization. The objectives are to instill awareness, disseminate information, provide training and rewards for identifying the true source or cause of wastes, and encourage employee participation in solving environmental issues and preventing pollution. PPAP at the Oak Ridge Y-12 Plant was created several years ago and continues to grow. We believe that we have implemented several unique methods of communicating environmental awareness to promote a more active work force in identifying ways of reducing pollution.

  19. The Accident Sequence Precursor program: Methods improvements and current results

    International Nuclear Information System (INIS)

    Minarick, J.W.; Manning, F.M.; Harris, J.D.

    1987-01-01

    Changes in the US NRC Accident Sequence Precursor program methods since the initial program evaluations of 1969-81 operational events are described, along with insights from the review of 1984-85 events. For 1984-85, the number of significant precursors was consistent with the number observed in 1980-81, dominant sequences associated with significant events were reasonably consistent with PRA estimates for BWRs, but lacked the contribution due to small-break LOCAs previously observed and predicted in PWRs, and the frequency of initiating events and non-recoverable system failures exhibited some reduction compared to 1980-81. Operational events which provide information concerning additional PRA modeling needs are also described

  20. 21 CFR 509.30 - Temporary tolerances for polychlorinated biphenyls (PCB's).

    Science.gov (United States)

    2010-04-01

    ...) are toxic, industrial chemicals. Because of their widespread, uncontrolled industrial applications... residues of PCB's as unavoidable environmental or industrial contaminants are established for a sufficient...

  1. Silicon photonic IC embedded optical-PCB for high-speed interconnect application

    Science.gov (United States)

    Kallega, Rakshitha; Nambiar, Siddharth; Kumar, Abhai; Ranganath, Praveen; Selvaraja, Shankar Kumar

    2018-02-01

    Optical-Printed Circuit Board (PCB) is an emerging optical interconnect technology to bridge the gap between the board edge and the processing module. The technology so far has been used as a broadband transmitter using polymer waveguides in the PCB. In this paper, we report a Silicon Nitride based photonic IC embedded in the PCB along with the polymers as waveguides in the PCB. The motivation for such integration is to bring routing capability and to reduce the power loss due to broadcasting mode.

  2. PCB usage at the Grand Junction Area Office Facility. Final report

    International Nuclear Information System (INIS)

    Miller, M.E.; Donivan, S.

    1982-06-01

    The development, implementation, and results of the polychlorinated biphenyl (PCB) identification project at the Grand Junction Area Office (GJAO) are summarized. Methodology for the PCB analysis is described, and results are tabulated. Of the 51 transformers and disconnects in use at GJAO, 15 unites were determined to be PCB-contaminated or filled with PCBs. This number falls within EPA's estimate of 25 to 40 percent of all transformers in use being at least contaminated. Approximately 324 gallons of PCBs and 515 gallons of PCB-contaminated fluids are being used currently. No contaminated transformers or disconnects are in a position to contaminate food or feed products at the facility

  3. Uptake and depuration of PCB-153 in edible shrimp Palaemonetes varians and human health risk assessment.

    Science.gov (United States)

    Grilo, T F; Cardoso, P G; Pato, P; Duarte, A C; Pardal, M A

    2014-03-01

    A medium-term mesocosm exposure study was conducted to elucidate bioaccumulation and depuration of polychlorinated biphenyl congener 153 (PCB-153) in edible shrimp Palaemonetes varians. Over the 15-day exposure period, shrimp under different exposure concentrations exhibited a significant increase in PCB-153 concentration compared with control organisms. Distinct bioaccumulation patterns and uptake rates were observed depending on the exposure concentrations. For low PCB-153 exposure levels (0.25μgL(-1)), accumulation followed a saturation model, reaching an apparent steady state after fifteen days exposure. For intermediate (2.5μgL(-1)) and high PCB-153 levels (25μgL(-1)), accumulation was faster and linear. In addition, the bioaccumulation rate was not proportional to PCB-153 concentration, and the bioaccumulation was higher at intermediate exposure concentrations. Regarding the depuration phase, P. varians lost up to 30% of PCB-153 after 72h and levels continued slowly to decrease until the end of the 30-d experimental period. However, PCB-153 levels in shrimp did not reach background values, and those exposed to moderate and high PCB-153 concentrations presented contamination levels much higher than the regulatory limit for human food consumption (75ngg(-1) ww for Σ6 PCB). Copyright © 2013 Elsevier Inc. All rights reserved.

  4. Sexual difference in PCB concentrations of lake trout (Salvelinus namaycush) from Lake Ontario

    Science.gov (United States)

    Madenjian, Charles P.; Keir, Michael J.; Whittle, D. Michael; Noguchi, George E.

    2010-01-01

    We determined polychlorinated biphenyl (PCB) concentrations in 61 female lake trout (Salvelinus namaycush) and 71 male lake trout from Lake Ontario (Ontario, Canada and New York, United States). To estimate the expected change in PCB concentration due to spawning, PCB concentrations in gonads and in somatic tissue of lake trout were also determined. In addition, bioenergetics modeling was applied to investigate whether gross growth efficiency (GGE) differed between the sexes. Results showed that, on average, males were 22% higher in PCB concentration than females in Lake Ontario. Results from the PCB determinations of the gonads and somatic tissues revealed that shedding of the gametes led to 3% and 14% increases in PCB concentration for males and females, respectively. Therefore, shedding of the gametes could not explain the higher PCB concentration in male lake trout. According to the bioenergetics modeling results, GGE of males was about 2% higher than adult female GGE, on average. Thus, bioenergetics modeling could not explain the higher PCB concentrations exhibited by the males. Nevertheless, a sexual difference in GGE remained a plausible explanation for the sexual difference in PCB concentrations of the lake trout.

  5. Effects of PCB contamination on the reproduction of the DAB Limanda limanda L. under laboratory conditions

    Science.gov (United States)

    Fonds, Mark; Casal, Elizabeth; Schweizer, Dominik; Boon, Jan P.; Van der Veer, Henk W.

    The effect of PCB contamination on the reproduction of female dab was studied under laboratory conditions. Females were contaminated during gonad maturation by multiple oral administration of capsules containing the technical PCB mixture Clophen A40. PCB contamination resulted in increased levels in the eggs, with concentrations of selected PCB congeners of 35 to 86 μg·g -1 lipid for PCB-exposed fish, 10 μg·g -1 lipid for eggs from fish fed with mussel meat and fish fed with shrimp. A statistically significant dose-effect relationship was found between the PCB content of the eggs and the PCB dose ingested by the fish. For eggs from the PCB-treated fish the mean fertilization rate was 61% and mean hatching 45%, compared to 67% fertilization and 59% hatching for eggs from untreated fish. Rate of development and survival of the eggs and mortality of the larvae after hatching were mainly related to incubation temperature. No statistically significant differences between untreated and PCB-treated fish could be found in egg production, egg quality, fertilization rate, hatching rate and survival of larvae.

  6. Analysis of a PCB In-Circuit Test and Its Optimized Cycle

    International Nuclear Information System (INIS)

    Chi, Moon Goo; Lee, Eun Chan; Bae, Yeon Kyoung

    2011-01-01

    KHNP performs subcomponent performance tests of the PCBs (Printed Circuit Boards) installed in safety-related systems or plant trip-related systems with every outage. The characteristics of each subcomponent are measured by test equipment. The tests are known as an ICT (In-Circuit Test). If a degraded condition is detected by this test, the affected subcomponents are replaced. This test has been conducted for 17 years, since 1994, and its results have been compiled into a test system database. As part of the reliability improvement plan of critical PCBs, KHNP developed a program that analyzes the performance of various key PCBs based on this test data. Thus, it became possible to evaluate the performance trends related to PCBs by tracing the test history of the PCB subcomponents through the ICT over many years. The present study also estimates an optimized ICT cycle that can be implemented to prevent the degradation of PCBs before they fail due to aging

  7. Program generator for the Incomplete Cholesky Conjugate Gradient (ICCG) method

    International Nuclear Information System (INIS)

    Kuo-Petravic, G.; Petravic, M.

    1978-04-01

    The Incomplete Cholesky Conjugate Gradient (ICCG) method has been found very effective for the solution of sparse systems of linear equations. Its implementation on a computer, however, requires a considerable amount of careful coding to achieve good machine efficiency. Furthermore, the resulting code is necessarily inflexible and cannot be easily adapted to different problems. We present in this paper a code generator GENIC which, given a small amount of information concerning the sparsity pattern and size of the system of equations, generates a solver package. This package, called SOLIC, is tailor made for a particular problem and can be easily incorporated into any user program

  8. The effect of anthropogenic contaminations (PAH, PCB) on terrestrial annelids in conurban ecosystems. Final report; Einfluss von anthropogenen Schadstoffen (PAK und PCB) auf terrestrische Invertebraten urbaner Oekosysteme. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Achazi, R.K.; Beylich, A.; Chroszcz, G.; Dueker, C.; Heck, M.; Henneken, M.; Flenner, C.; Froehlich, E.; Garbers, U.; Khan, M.A.; Kreibich, M.; Kronshage, J.; Philippe, L.; Pilz, C.; Rothe, B.; Schabedoth, E.; Schaub, K.; Scheiwe, E.; Schmid, C.; Steudel, I.; Struwe, M.; Throl, C.; Wuertz, S. [Freie Univ. Berlin (Germany); Back, H.; Naehring, D.; Thielemann, U. [Gesellschaft fuer Angewandte Oekologie und Umweltplanung mbH, Nussloch (Germany)

    1997-09-23

    The project was conducted from August 1993 until May 1997. The objectives were (a) an elaboration of effect concentrations and index values for organic contaminants (PAH, PCB) and heavy metals in soil of conurbations for the community of decomposers, (b) the improvement of a biotest system for the evaluation of the habitat function of contaminated soils and (c) to obtain informations concerning a controlled utilization of contaminated areas. For that purpose field investigations in former sewage water irrigation areas of Berlin, Germany, concerning the abundance, species composition and dominance structure of terrestrial annelids (Enchytraeids, Lumbricids) were performed, as well as bioassays using contaminated soils of these sites and soils spiked with bezo(a)pyrene, fluoranthene, PCB 52, Cd and Cu and experiments on accumulation, elimination and biotransformation in annelids. 12 of the 17 sites investigated lacked earthworms, while only 2 sites lacked enchytraeids. The abundance of enchytraeids was in the range of 500 to 12.500/m{sup 2}, compared to 25.000 to 280.000/m{sup 2} on reference sites. The hostility of the soils of former irrigation fields to annelids was confirmed by lamina bait tests and by bioassays with Enchytraeus crypticus, E. albidus, E. buchholzi and Eisenia f. fetida. The ecotoxicity of the combined contaminants was enforced by the acidity and the degradation of the soils. The toxicity of organic and inorganic contaminants to terrestrial annelids was definitely proved by reproduction tests in the agar test system. The applied methods of investigation can be used for evaluation of contaminated soils. (orig.) [Deutsch] Das Projekt wurde von August 1993 bis Mai 1997 durchgefuehrt. Ziele waren die Erarbeitung (a) von Wirkschwellen fuer organische Schadstoffgruppen (PAK, PCB) und Schwermetalle im Boden fuer Destruenten urbaner Oekosysteme, (b) von Biotestsystemen zur Bewertung der Lebensraumfunktion belasteter Boeden und (c) von Hinweisen zur

  9. EFFECTS OF PCB 84 ATROPISOMERS ON [3H]-PHORBOL ESTER BINDING IN RAT CEREBELLAR GRANULE CELLS AND 45CA2+-UPTAKE IN RAT CEREBELLUM.

    Science.gov (United States)

    There is evidence that Polychlorinated biphenyl (PCB) congeners with ortho substituents have potential to cause neurotoxicity. Many PCB congeners implicated in these neurotoxic effects are chiral. It is currently unknown if the enantiomers of a chiral PCB congeners have differe...

  10. ARSTEC, Nonlinear Optimization Program Using Random Search Method

    International Nuclear Information System (INIS)

    Rasmuson, D. M.; Marshall, N. H.

    1979-01-01

    1 - Description of problem or function: The ARSTEC program was written to solve nonlinear, mixed integer, optimization problems. An example of such a problem in the nuclear industry is the allocation of redundant parts in the design of a nuclear power plant to minimize plant unavailability. 2 - Method of solution: The technique used in ARSTEC is the adaptive random search method. The search is started from an arbitrary point in the search region and every time a point that improves the objective function is found, the search region is centered at that new point. 3 - Restrictions on the complexity of the problem: Presently, the maximum number of independent variables allowed is 10. This can be changed by increasing the dimension of the arrays

  11. Development of ray tracing visualization program by Monte Carlo method

    Energy Technology Data Exchange (ETDEWEB)

    Higuchi, Kenji; Otani, Takayuki [Japan Atomic Energy Research Inst., Tokyo (Japan); Hasegawa, Yukihiro

    1997-09-01

    Ray tracing algorithm is a powerful method to synthesize three dimensional computer graphics. In conventional ray tracing algorithms, a view point is used as a starting point of ray tracing, from which the rays are tracked up to the light sources through center points of pixels on the view screen to calculate the intensities of the pixels. This manner, however, makes it difficult to define the configuration of light source as well as to strictly simulate the reflections of the rays. To resolve these problems, we have developed a new ray tracing means which traces rays from a light source, not from a view point, with use of Monte Carlo method which is widely applied in nuclear fields. Moreover, we adopt the variance reduction techniques to the program with use of the specialized machine (Monte-4) for particle transport Monte Carlo so that the computational time could be successfully reduced. (author)

  12. Bayesian methods for hackers probabilistic programming and Bayesian inference

    CERN Document Server

    Davidson-Pilon, Cameron

    2016-01-01

    Bayesian methods of inference are deeply natural and extremely powerful. However, most discussions of Bayesian inference rely on intensely complex mathematical analyses and artificial examples, making it inaccessible to anyone without a strong mathematical background. Now, though, Cameron Davidson-Pilon introduces Bayesian inference from a computational perspective, bridging theory to practice–freeing you to get results using computing power. Bayesian Methods for Hackers illuminates Bayesian inference through probabilistic programming with the powerful PyMC language and the closely related Python tools NumPy, SciPy, and Matplotlib. Using this approach, you can reach effective solutions in small increments, without extensive mathematical intervention. Davidson-Pilon begins by introducing the concepts underlying Bayesian inference, comparing it with other techniques and guiding you through building and training your first Bayesian model. Next, he introduces PyMC through a series of detailed examples a...

  13. Polychlorinated biphenyls (PCB 101, PCB 153 and PCB 180) alter leptin signaling and lipid metabolism in differentiated 3T3-L1 adipocytes

    International Nuclear Information System (INIS)

    Ferrante, Maria C.; Amero, Paola; Santoro, Anna; Monnolo, Anna; Simeoli, Raffaele; Di Guida, Francesca; Mattace Raso, Giuseppina; Meli, Rosaria

    2014-01-01

    Non-dioxin-like polychlorinated biphenyls (NDL-PCBs) are highly lipophilic environmental contaminants that accumulate in lipid-rich tissues, such as adipose tissue. Here, we reported the effects induced by PCBs 101, 153 and 180, three of the six NDL-PCBs defined as indicators, on mature 3T3-L1 adipocytes. We observed an increase in lipid content, in leptin gene expression and a reduction of leptin receptor expression and signaling, when cells were exposed to PCBs, alone or in combination. These modifications were consistent with the occurrence of “leptin-resistance” in adipose tissue, a typical metabolic alteration related to obesity. Therefore, we investigated how PCBs affect the expression of pivotal proteins involved in the signaling of leptin receptor. We evaluated the PCB effect on the intracellular pathway JAK/STAT, determining the phosphorylation of STAT3, a downstream activator of the transcription of leptin gene targets, and the expression of SOCS3 and PTP1B, two important regulators of leptin resistance. In particular, PCBs 153 and 180 or all PCB combinations induced a significant reduction in pSTAT3/STAT3 ratio and an increase in PTP1B and SOCS3, evidencing an additive effect. The impairment of leptin signaling was associated with the reduction of AMPK/ACC pathway activation, leading to the increase in lipid content. These pollutants were also able to increase the transcription of inflammatory cytokines (IL-6 and TNFα). It is worthy to note that the PCB concentrations used are comparable to levels detectable in human adipose tissue. Our data strongly support the hypothesis that NDL-PCBs may interfere with the lipid metabolism contributing to the development of obesity and related diseases. - Highlights: • NDL-PCBs alter lipid content and metabolism in 3T3-L1 adipocytes. • Impairment of leptin signaling was induced by NDL-PCBs. • NDL-PCBs reduce AMPK and ACC activation. • NDL-PCBs induce the synthesis of pro-inflammatory cytokine by

  14. Polychlorinated biphenyls (PCB 101, PCB 153 and PCB 180) alter leptin signaling and lipid metabolism in differentiated 3T3-L1 adipocytes

    Energy Technology Data Exchange (ETDEWEB)

    Ferrante, Maria C. [Department of Veterinary Medicine and Animal Productions, Federico II University of Naples, Via Delpino 1, 80137 Naples (Italy); Amero, Paola; Santoro, Anna [Department of Pharmacy, Federico II University of Naples, Via Montesano 49, 80131 Naples (Italy); Monnolo, Anna [Department of Veterinary Medicine and Animal Productions, Federico II University of Naples, Via Delpino 1, 80137 Naples (Italy); Simeoli, Raffaele; Di Guida, Francesca [Department of Pharmacy, Federico II University of Naples, Via Montesano 49, 80131 Naples (Italy); Mattace Raso, Giuseppina, E-mail: mattace@unina.it [Department of Pharmacy, Federico II University of Naples, Via Montesano 49, 80131 Naples (Italy); Meli, Rosaria, E-mail: meli@unina.it [Department of Pharmacy, Federico II University of Naples, Via Montesano 49, 80131 Naples (Italy)

    2014-09-15

    Non-dioxin-like polychlorinated biphenyls (NDL-PCBs) are highly lipophilic environmental contaminants that accumulate in lipid-rich tissues, such as adipose tissue. Here, we reported the effects induced by PCBs 101, 153 and 180, three of the six NDL-PCBs defined as indicators, on mature 3T3-L1 adipocytes. We observed an increase in lipid content, in leptin gene expression and a reduction of leptin receptor expression and signaling, when cells were exposed to PCBs, alone or in combination. These modifications were consistent with the occurrence of “leptin-resistance” in adipose tissue, a typical metabolic alteration related to obesity. Therefore, we investigated how PCBs affect the expression of pivotal proteins involved in the signaling of leptin receptor. We evaluated the PCB effect on the intracellular pathway JAK/STAT, determining the phosphorylation of STAT3, a downstream activator of the transcription of leptin gene targets, and the expression of SOCS3 and PTP1B, two important regulators of leptin resistance. In particular, PCBs 153 and 180 or all PCB combinations induced a significant reduction in pSTAT3/STAT3 ratio and an increase in PTP1B and SOCS3, evidencing an additive effect. The impairment of leptin signaling was associated with the reduction of AMPK/ACC pathway activation, leading to the increase in lipid content. These pollutants were also able to increase the transcription of inflammatory cytokines (IL-6 and TNFα). It is worthy to note that the PCB concentrations used are comparable to levels detectable in human adipose tissue. Our data strongly support the hypothesis that NDL-PCBs may interfere with the lipid metabolism contributing to the development of obesity and related diseases. - Highlights: • NDL-PCBs alter lipid content and metabolism in 3T3-L1 adipocytes. • Impairment of leptin signaling was induced by NDL-PCBs. • NDL-PCBs reduce AMPK and ACC activation. • NDL-PCBs induce the synthesis of pro-inflammatory cytokine by

  15. The HACMS program: using formal methods to eliminate exploitable bugs.

    Science.gov (United States)

    Fisher, Kathleen; Launchbury, John; Richards, Raymond

    2017-10-13

    For decades, formal methods have offered the promise of verified software that does not have exploitable bugs. Until recently, however, it has not been possible to verify software of sufficient complexity to be useful. Recently, that situation has changed. SeL4 is an open-source operating system microkernel efficient enough to be used in a wide range of practical applications. Its designers proved it to be fully functionally correct, ensuring the absence of buffer overflows, null pointer exceptions, use-after-free errors, etc., and guaranteeing integrity and confidentiality. The CompCert Verifying C Compiler maps source C programs to provably equivalent assembly language, ensuring the absence of exploitable bugs in the compiler. A number of factors have enabled this revolution, including faster processors, increased automation, more extensive infrastructure, specialized logics and the decision to co-develop code and correctness proofs rather than verify existing artefacts. In this paper, we explore the promise and limitations of current formal-methods techniques. We discuss these issues in the context of DARPA's HACMS program, which had as its goal the creation of high-assurance software for vehicles, including quadcopters, helicopters and automobiles.This article is part of the themed issue 'Verified trustworthy software systems'. © 2017 The Authors.

  16. The HACMS program: using formal methods to eliminate exploitable bugs

    Science.gov (United States)

    Launchbury, John; Richards, Raymond

    2017-01-01

    For decades, formal methods have offered the promise of verified software that does not have exploitable bugs. Until recently, however, it has not been possible to verify software of sufficient complexity to be useful. Recently, that situation has changed. SeL4 is an open-source operating system microkernel efficient enough to be used in a wide range of practical applications. Its designers proved it to be fully functionally correct, ensuring the absence of buffer overflows, null pointer exceptions, use-after-free errors, etc., and guaranteeing integrity and confidentiality. The CompCert Verifying C Compiler maps source C programs to provably equivalent assembly language, ensuring the absence of exploitable bugs in the compiler. A number of factors have enabled this revolution, including faster processors, increased automation, more extensive infrastructure, specialized logics and the decision to co-develop code and correctness proofs rather than verify existing artefacts. In this paper, we explore the promise and limitations of current formal-methods techniques. We discuss these issues in the context of DARPA’s HACMS program, which had as its goal the creation of high-assurance software for vehicles, including quadcopters, helicopters and automobiles. This article is part of the themed issue ‘Verified trustworthy software systems’. PMID:28871050

  17. PCB 28 metabolites elimination kinetics in human plasma on a real case scenario: Study of hydroxylated polychlorinated biphenyl (OH-PCB) metabolites of PCB 28 in a highly exposed German Cohort.

    Science.gov (United States)

    Quinete, Natalia; Esser, André; Kraus, Thomas; Schettgen, Thomas

    2017-07-05

    Polychlorinated biphenyls (PCBs) are suspected of carcinogenic, neurotoxic and immunotoxic effects in animals and humans. Although background levels of PCBs have been slowly decreased after their ban, they are still among the most persistent and ubiquitous pollutants in the environment, remaining the subject of great concern. PCB 28 is a trichlorinated PCB found in high concentrations not only in human plasma but also in indoor air in Europe, yet little is known about its metabolic pathway and potential metabolites in humans. The present study aims to elucidate the kinetics of metabolite formation and elimination by analyzing four hydroxylated PCBs (OH-PCBs) in human plasma as potential metabolites of the PCB 28 congener. For this purpose, the study was conducted in plasma samples of highly PCB-exposed individuals (N=268), collected from 2010 to 2014 as a representation of a real case scenario with longitudinal data. OH-PCBs have been predicted, synthesized in the course of this study and further identified and quantitated in human plasma. This is the first time that previously unknown PCB 28 metabolites have been measured in human plasma and half-lives have been estimated for PCB metabolites, which could then provide further understanding in the toxicological consequences of exposure to PCBs in humans. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Experimental feeding of DDE and PCB to female big brown bats (Eptesicus fuscus)

    Science.gov (United States)

    Clark, D.R.; Prouty, R.M.

    1977-01-01

    Twenty-two female big brown bats (Eptesicus fuscus) were collected in a house attic in Montgomery County, Maryland. Seventeen were fed mealworms (Tenebrio molitor larvae) that contained 166 ppm DDE; the other five were fed uncontaminated mealworms. After 54 days of feeding, six dosed bats were frozen and the remaining 16 were starved to death. In a second experiment, 21 female big brown bats were collected in a house attic in Prince Georges County, Maryland. Sixteen were fed mealworms that contained 9.4 ppm Aroclor 1254 (PCB). After 37 days, two bats had died, four dosed bats were frozen, and the remaining 15 were starved to death. Starvation caused mobilization of stored residues. After the feeding periods, average weights of all four groups (DDE-dosed, DDE control, PCB-dosed, PCB control) had increased. However, weights of DDE-dosed bats had increased significantly more than those of their contols, whereas weights of PCB-dosed bats had increased significantly less than those of their controls. During starvation, PCB-dosed bats lost weight significantly more slowly than controls. Because PCB levels in dosed bats resembled levels found in some free-living big brown bats, PCBs may be slowing metabolic rates of some free-living bats. It is not known how various common organochlorine residues may affect metabolism in hibernating bats. DDE and PCB increased in brains of starving bats as carcass fat was metabolized. Because the tremors and/or convulsions characteristic of neurotoxicity were not observed, we think even the maximum brain levels attained (132 ppm DDE, 20 ppm PCB) were sublethal. However, extrapolation of our DDE data predicted lethal brain levels when fat reserves declined sufficiently. PCB-dosed bats were probably in no danger of neurotoxic poisoning. However, PCB can kill by a nonneurotoxic mode, and this could explain the deaths of two bats on PCB dosage.

  19. Study of penetration behavior of PCB-DNAPL in a sand layer by a column experiment.

    Science.gov (United States)

    Okuda, Nobuyasu; Shimizu, Takaaki; Muratani, Masaru; Terada, Akihiko; Hosomi, Masaaki

    2014-11-01

    To better understand the infiltration performances of high concentration PCB oils (KC-300 and KC-1000 polychlorinated biphenyl (PCB) mixtures), representative dense non-aqueous phase liquid (DNAPL), under both saturated and unsaturated conditions, we conducted experiments on a sand column filled with Toyoura Standard Sand. When PCB oil with the volume comparable to the total porosity in the column was supplied, the residual PCB concentrations under PCB-water conditions were 4.9×10(4)mgkg(-1) in KC-300 and 3.9×10(4)mgkg(-1) in KC-1000. Under PCB-air conditions, residual PCB concentrations were 6.0×10(4)mgkg(-1) and 2.4×10(5)mgkg(-1) in the upper and lower parts for KC-300 and 3.6×10(4)mgkg(-1) and 1.5×10(5)mgkg(-1) in those for KC-1000, respectively, while the rest of the PCBs were infiltrated. On the other hand, when a small amount of PCB oil with the volume far smaller than the total porosity in the column was supplied, the original PCBs were not transported via water permeation. However, lower-chlorinated PCB congeners-e.g., di- or tri-chlorinated biphenyls-preferentially dissolved and were infiltrated from the bottom of the column. These propensities on PCB oil infiltration can be explained in conjunction with the degree of PCB saturation in the sand column. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Evaluation of PAH and PCB in soil

    International Nuclear Information System (INIS)

    Hein, D.; Delschen, T.

    1994-01-01

    The soil data obtained should be regarded as provisional, as there is still insufficient knowledge on the influence of accompanying substances such as organic solvents on the transfer behaviour and mobility of the soil pollutants under consideration. Moreover, the significance of metabolic processes in soils and plants is largely still unknown. There are no generally accepted standards for BCB and PAH analysis in soil and plants. The diversity in methods applied has led to widely disparate results. The data situation for PAH is so heterogeneous as to allow test results to be derived solely for benzo[a]pyrene. It will be a task for the future to clarify the extent to which other substances must be taken into account here, e.g., with respect to toxicity and availability. (orig.) [de

  1. Procurement and execution of PCB analyses: Customer-analyst interactions

    International Nuclear Information System (INIS)

    Erickson, M.D.

    1993-01-01

    The practical application of PCB (polychlorinated biphenyl) analyses begins with a request for the analysis and concludes with provision of the requested analysis. The key to successful execution of this iteration is timely, professional communication between the requester and the analyst. Often PCB analyses are not satisfactorily executed, either because the requester failed to give adequate instructions or because the analyst simply ''did what he/she was told.'' The request for and conduct of a PCB analysis represents a contract for the procurement of a product (information about the sample); if both parties recognize and abide by this contractual relationship, the process generally proceeds smoothly. Requesters may be corporate purchasing agents working from a scope of work, a sample management office, a field team leader, a project manager, a physician's office, or the analyst himself. The analyst with whom the requester communicates may be a laboratory supervisor, a sample-receiving department, a salesperson for the laboratory, or the analyst himself. The analyst conducting the analysis is often a team, with custody of the sample being passed from sample receiving to the extraction laboratory, to the cleanup laboratory, to the gas chromatography (GC) laboratory, to the data reduction person, to the package preparation person, to the quality control (QC) department for verification, to shipping. Where a team of analysts is involved, the requester needs a central point of contact to minimize confusion and frustration. For the requester-analyst interface to work smoothly, it must function as if it is a one-to-one interaction. This article addresses the pitfalls of the requester-analyst interaction and provides suggestions for improving the quality of the analytical product through the requester-analyst interface

  2. Plant exudates promote PCB degradation by a rhodococcal rhizobacteria

    Energy Technology Data Exchange (ETDEWEB)

    Toussaint, Jean-Patrick; Pham, Thi Thanh My; Barriault, Diane; Sylvestre, Michel [Instiut National de la Recherche Scientifique INRS, Laval, QC (Canada). Inst. Armand-Frappier

    2012-09-15

    Rhodococcus erythropolis U23A is a polychlorinated biphenyl (PCB)-degrading bacterium isolated from the rhizosphere of plants grown on a PCB-contaminated soil. Strain U23A bphA exhibited 99% identity with bphA1 of Rhodococcus globerulus P6. We grew Arabidopsis thaliana in a hydroponic axenic system, collected, and concentrated the plant secondary metabolite-containing root exudates. Strain U23A exhibited a chemotactic response toward these root exudates. In a root colonizing assay, the number of cells of strain U23A associated to the plant roots (5.7 x 105 CFU g{sup -1}) was greater than the number remaining in the surrounding sand (4.5 x 104 CFU g{sup -1}). Furthermore, the exudates could support the growth of strain U23A. In a resting cell suspension assay, cells grown in a minimal medium containing Arabidopsis root exudates as sole growth substrate were able to metabolize 2,3,4'- and 2,3',4-trichlorobiphenyl. However, no significant degradation of any of congeners was observed for control cells grown on Luria-Bertani medium. Although strain U23A was unable to grow on any of the flavonoids identified in root exudates, biphenyl-induced cells metabolized flavanone, one of the major root exudate components. In addition, when used as co-substrate with sodium acetate, flavanone was as efficient as biphenyl to induce the biphenyl catabolic pathway of strain U23A. Together, these data provide supporting evidence that some rhodococci can live in soil in close association with plant roots and that root exudates can support their growth and trigger their PCB-degrading ability. This suggests that, like the flagellated Gram-negative bacteria, non-flagellated rhodococci may also play a key role in the degradation of persistent pollutants. (orig.)

  3. 24-71 GHz PCB Array for 5G ISM

    Science.gov (United States)

    Novak, Markus H.; Volakis, John L.; Miranda, Felix A.

    2017-01-01

    Millimeter-wave 5G mobile architectures need to consolidate disparate frequency bands into a single, multifunctional array. Existing arrays are either narrow-band, prohibitively expensive or cannot be scaled to these frequencies. In this paper, we present the first ultra-wideband millimeter wave array to operate across six 5G and ISM bands spanning 24-71 GHz. Importantly, the array is realized using low-cost PCB. The paper presents the design and optimized layout, and discusses fabrication and measurements.

  4. Complete PCB design using OrCAD capture and layout

    CERN Document Server

    Mitzner, Kraig

    2011-01-01

    This book provides instruction on how to use the OrCAD design suite to design and manufacture printed circuit boards. The book is written for both students and practicing engineers who need a quick tutorial on how to use the software and who need in-depth knowledge of the capabilities and limitations of the software package. There are two goals the book aims to reach:The primary goal is to show the reader how to design a PCB using OrCAD Capture and OrCAD Layout. Capture is used to build the schematic diagram of the circuit, and Layout is used to design the circuit board so that

  5. Passive sampling of polychlorinated biphenyls (PCB) in indoor air

    DEFF Research Database (Denmark)

    Vorkamp, Katrin; Mayer, Philipp

    PCBs were widely used in construction materials in the 1906s and 1970s, a period of high building activity in Denmark. The objective of this study was therefore to use passive sampling techniques to develop a simple and cost-effective screening tool for PCBs in indoor air. The study proceeded...... in three phases combining a literature review, laboratory experiments and measurements in buildings potentially containing PCBs in indoor air. The laboratory experiments showed a strong influence of air velocity on the PCB partitioning between air and the passive sampler. Based on the results of the first...

  6. Nonlinear dynamic response of a 'flexible-and-heavy' printed circuit board (PCB) to an impact load applied to its support contour

    International Nuclear Information System (INIS)

    Suhir, E; Vujosevic, M; Reinikainen, T

    2009-01-01

    Based on the developed simple and physically meaningful analytical ('mathematical') stress model, we evaluate some major parameters (amplitude, frequency, maximum acceleration, stresses and strains) of the response of a 'flexible-and-heavy' square simply supported printed circuit board (PCB) to an impact drop load applied to its support contour. The analysis is restricted to the first mode of vibrations and is carried out in application to the PCB design employed in an advanced accelerated test setup (test vehicle). This setup is aimed at the assessment of the performance, in accelerated test conditions on the board level, of packaging materials (and, first of all, BGA solder joint interconnections) subjected to dynamic (drop or shock) loading. It is anticipated that heavy masses could be mounted on the PCB to accelerate its dynamic response to an impact load. These masses are expected to be small in size, so that while changing the total mass of the board and generating significant inertia forces, they do not affect the board's flexural rigidity or its stiffness with respect to the in-plane loading. The PCB's contour is considered non-deformable, which is indeed the case in many practical situations. This circumstance, if the drop height and/or the induced inertia forces are significant, leads to elevated in-plane ('membrane') stresses in the PCB and, as a result of that, to the nonlinear response of the board to the impact load: the relationship between the magnitude of the load (determined by the initial impact velocity) and the induced PCB deflections becomes geometrically nonlinear, with a rigid cubic characteristic of the restoring force. The carried out numerical example, although reflects the characteristics of the PCB and loading conditions in an actual experimental setup, is merely an illustration of the general concept and is intended to demonstrate the abilities of the suggested method. Predictions based on this method agree well with the finite element

  7. Oxidative stress and apoptosis of Carassius auratus lymphocytes induced by nonplanar (PCB153) and coplanar (PCB169) polychlorinated biphenyl congeners in vitro

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jian-ying; ZHANG Hang-jun; NI Wan-min

    2009-01-01

    and the coplanar congener was more cytotoxic than nonplanar congener. This study suggests that cytotoxicity mechanisms of the PCB congeners on fish lymphocytes depend on their planarity and chemical structures.

  8. A Method for Developing Standard Patient Education Program.

    Science.gov (United States)

    Lura, Carolina Bryne; Hauch, Sophie Misser Pallesgaard; Gøeg, Kirstine Rosenbeck; Pape-Haugaard, Louise

    2018-01-01

    In Denmark, patients being treated on Haematology Outpatients Departments get instructed to self-manage their blood sample collection from Central Venous Catheter (CVC). However, this is a complex and risky procedure, which can jeopardize patient safety. The aim of the study was to suggest a method for developing standard digital patient education programs for patients in self-administration of blood samples drawn from CVC. The Design Science Research Paradigm was used to develop a digital patient education program, called PAVIOSY, to increase patient safety during execution of the blood sample collection procedure by using videos for teaching as well as procedural support. A step-by-step guide was developed and used as basis for making the videos. Quality assurance through evaluation with a nurse was conducted on both the step-by-step guide and the videos. The quality assurance evaluation of the videos showed; 1) Errors due to the order of the procedure can be determined by reviewing the videos despite that the guide was followed. 2) Videos can be used to identify errors - important for patient safety - in the procedure, which are not identifiable in a written script. To ensure correct clinical content of the educational patient system, health professionals must be engaged early in the development of content and design phase.

  9. A New Method for Solving Multiobjective Bilevel Programs

    Directory of Open Access Journals (Sweden)

    Ying Ji

    2017-01-01

    Full Text Available We study a class of multiobjective bilevel programs with the weights of objectives being uncertain and assumed to belong to convex and compact set. To the best of our knowledge, there is no study about this class of problems. We use a worst-case weighted approach to solve this class of problems. Our “worst-case weighted multiobjective bilevel programs” model supposes that each player (leader or follower has a set of weights to their objectives and wishes to minimize their maximum weighted sum objective where the maximization is with respect to the set of weights. This new model gives rise to a new Pareto optimum concept, which we call “robust-weighted Pareto optimum”; for the worst-case weighted multiobjective optimization with the weight set of each player given as a polytope, we show that a robust-weighted Pareto optimum can be obtained by solving mathematical programing with equilibrium constraints (MPEC. For an application, we illustrate the usefulness of the worst-case weighted multiobjective optimization to a supply chain risk management under demand uncertainty. By the comparison with the existing weighted approach, we show that our method is more robust and can be more efficiently applied to real-world problems.

  10. An improved inventory of polychlorinated biphenyls in China: A case study on PCB-153

    Science.gov (United States)

    Xu, Yue; Tian, Chongguo; Wang, Xiaoping; Ma, Jianmin; Tang, Jianhui; Chen, Yingjun; Li, Jun; Zhang, Gan

    2018-06-01

    Emission inventory of pollutants is essential for the environmental fate study and management of the pollutant. To construct a reasonable PCB (polychlorinated biphenyls) inventory in China, this study estimates PCB usage and emission using power generating capacity, installed capacity of power plants and transformer substations, population density and GDP as surrogates. Inventory of representative PCB (PCB-153) with a resolution of 1/4° latitude × 1/4° longitude in China from 1952 to 2005 was generated and assessed as an example. Totally, about 20.3 kt PCBs were applied in China, of which 179 t were PCB-153. By the end of 2005, most of them (56.4%) were emitted into the soil, 2.7% entered the air, and about 20.8% was sealed in storage site or still in service. Historical emissions exhibited increasing trends after 1968, 1984 and 1994, which were mainly associated with usage or disposal processes. Although primary emission has been declined since 2005, the influence of secondary emission from soils, unintentionally produced PCBs (UP-PCB), and reemission from storage sites could be a long-lasting issue in the future. This new emission inventory improves previous PCB emission inventory significantly, which underestimated PCB emission in China considerably.

  11. Polychlorinated Biphenyl Sources, Emissions, and Environmental Levels in school Buildings (PCB Workshop presentation)

    Science.gov (United States)

    Measure PCB emission rates from primary sources in laboratory chambersMeasure transport and sorption by materials and dust in laboratory chambersCharacterize PCBs in school building materialsEstimate PCB emission rates from sources in schoolsExamine congener patterns in sources a...

  12. Sexual difference in PCB concentrations of walleyes (Sander vitreus) from a pristine lake

    Science.gov (United States)

    Madenjian, C.P.; Hanchin, P.A.; Chernyak, S.M.; Begnoche, L.J.

    2009-01-01

    We determined polychlorinated biphenyl (PCB) concentrations in 15 adult female walleyes (Sander vitreus) and 15 adult male walleyes from South Manistique Lake (Michigan, United States), a relatively pristine lake with no point source inputs of PCBs. By measuring PCB concentration in gonads and in somatic tissue of the South Manistique Lake fish, we also estimated the expected change in PCB concentration due to spawning for both sexes. To determine whether gross growth efficiency differed between the sexes, we applied bioenergetics modeling. Results showed that, on average, adult males were 34% higher in PCB concentration than adult females in South Manistique Lake. Results from the PCB determinations of the gonads and somatic tissues revealed that shedding of the gametes led to 1% and 5% increases in PCB concentration for males and females, respectively. Therefore, shedding of the gametes could not explain the higher PCB concentration in adult male walleyes. Bioenergetics modeling results indicated that the sexual difference in PCB concentrations of South Manistique Lake walleyes was attributable, at least in part, to a sexual difference in gross growth efficiency (GGE). Adult female GGE was estimated to be up to 17% greater than adult male GGE.

  13. Microbial community analysis of switchgrass planted and unplanted soil microcosms displaying PCB dechlorination.

    Science.gov (United States)

    Liang, Yi; Meggo, Richard; Hu, Dingfei; Schnoor, Jerald L; Mattes, Timothy E

    2015-08-01

    Polychlorinated biphenyls (PCBs) pose potential risks to human and environmental health because they are carcinogenic, persistent, and bioaccumulative. In this study, we investigated bacterial communities in soil microcosms spiked with PCB 52, 77, and 153. Switchgrass (Panicum virgatum) was employed to improve overall PCB removal, and redox cycling (i.e., sequential periods of flooding followed by periods of no flooding) was performed in an effort to promote PCB dechlorination. Lesser chlorinated PCB transformation products were detected in all microcosms, indicating the occurrence of PCB dechlorination. Terminal restriction fragment length polymorphism (T-RFLP) and clone library analysis showed that PCB spiking, switchgrass planting, and redox cycling affected the microbial community structure. Putative organohalide-respiring Chloroflexi populations, which were not found in unflooded microcosms, were enriched after 2 weeks of flooding in the redox-cycled microcosms. Sequences classified as Geobacter sp. were detected in all microcosms and were most abundant in the switchgrass-planted microcosm spiked with PCB congeners. The presence of possible organohalide-respiring bacteria in these soil microcosms suggests that they play a role in PCB dechlorination therein.

  14. Idaho National Laboratory PCB Annual Document Log and Annual Records Report for Calendar Year 2013

    Energy Technology Data Exchange (ETDEWEB)

    no name on report

    2014-06-01

    The requirements for the reporting of polychlorinated biphenyl (PCB)-related activities are found in 40 Code of Federal Regulations (CFR) 761 Subpart J, "General Records and Reports." The PCB Annual Document Log is a detailed record of the PCB waste handling activities at the facility. The facility must prepare it each year by July 1 and maintain it at the facility for at least 3 years after the facility ceases using or storing PCBs and PCB items. While submittal of the PCB Annual Document Log to the U.S. Environmental Protection Agency (EPA) is not required by regulation, EPA has verbally requested in telephone conversations that this report be submitted to them on an annual basis. The Annual Document Log section of this report meets the requirements of 40 CFR 761.180(a)(2), as applicable, while the Annual Records section meets the requirement of 40 CFR 761.180(a)(1).

  15. Tracking Polychlorinated Biphenyls (PCB) after an incident along a river system - Case study Elbe River

    Science.gov (United States)

    Kleisinger, Carmen; Dietrich, Stephan; Kehl, Nora; Claus, Evelyn; Schubert, Birgit

    2017-04-01

    In spring 2015, extremely high concentrations of Polychlorinated Biphenyls (PCB) well above the long-term average were detected in suspended particulate matter (SPM) within the River Elbe. They were released due to abrasive blasting of the old coating from a bridge in the upper part of the River, approximately 50 km upstream of the first measurement site. PCBs are persistent organic pollutants, preferentially bound to fine-grained fractions of the SPM. Results from monitoring of contaminants in SPM along the Elbe indicate the further dispersal of the PCB-contaminated sediments. These measurements include yearly investigations on PCB concentrations in sediments in the inner reaches of the Elbe, an additional longitudinal survey in 2015 and monthly monitoring of PCBs in SPM at stations along the river including the Elbe estuary (Germany). The Elbe estuary is of major economic importance since Hamburg harbour, one of the largest harbours in Europe, is located there. Maintaining the harbour includes dredging and, i.a., relocating large amounts of the dredged material within the water body. High PCB concentrations in sediments could lead to restrictions on the relocation of these sediments. This study aims at tracking the fate of PCB contaminated material released from the point source of the incident site along the whole river stretch and at estimating its impact on the quality of sediments and consequently on dredging activities in the estuary. The ratio of high (PCB 138, 152 and 180) versus low (PCB 28, 52, 101) chlorinated PCB congeners proved to be a suitable tracer to distinguish the PCB load released by the incident from the long-term background signals. As Delor 106/Clophen A60, which contains approx. 90% hexa- to decachloric congeners, was an additive in the coating of the bridge, the pattern of PCBs released by the incident is dominated by the highly chlorinated PCB-congeners PCB 138, 153 and 180. At the tidal weir Geesthacht, the entrance to the estuary, an

  16. Radiation dechlorination of PCE and PCB in the quarter operation flow apparatus

    International Nuclear Information System (INIS)

    Mucka, V.; Silber, R.; Pospisil, M.; Camra, M.; Bartonicek, B.

    1999-01-01

    The aim of this work was to verify practical possibilities of radiation dechlorination of liquid chlorinated substrates [perchloroethylene (PCE) and polychlorinated biphenyls (PCB)] in the quarter operation flow apparatus. In this apparatus may be disposable work over 50 dm 3 of media. Radiation dechlorination of PCE proceeds more effectively as dechlorination of PCB in flow regimes, too. Radiation chemical yield of G(-OH - ) decrease with increasing applied radiation dose and at the dose 5 kGy for PCE it is 200 · 10 -2 eV -1 and for PCB this value is 55 · 10 -2 eV -1 . At increasing original concentration of PCE or PCB the G-values decreases. The radical chain mechanism of dechlorination of PCE and PCB was proposed

  17. Migration and opportunistic feeding increase PCB accumulation in Arctic seabirds.

    Science.gov (United States)

    Baert, J M; Janssen, C R; Borgå, K; De Laender, F

    2013-10-15

    It is widely accepted that body concentrations of persistent organic pollutants (POPs) tend to increase with trophic level (TL). Yet, little attention has been paid to the causes in the underlying differences in POP body concentrations between species occupying similar TLs. In this paper we use two modeling approaches to quantify the importance of migration and opportunistic feeding, relative to that of trophic level, in explaining interspecific differences in polychlorinated biphenyl (PCB) body concentrations between 6 Arctic seabird species breeding in the Barents Sea: Little Auk (Alle alle), Black Guillemot (Cepphus grylle), Brünnich's Guillemot (Uria lomvia), Common Eider (Somateria mollissima), Black-legged Kittiwake (Rissa tridactyla), and Glaucous Gull (Larus hyperboreus). As a first approach, we use additive models to analyze two independent data sets (n = 470 and n = 726). We demonstrate that migration, opportunistic feeding, and TL significantly (p < 0.001) increase PCB body concentrations by a factor 3.61-4.10, 2.66-20.95, and 2.38-2.41, respectively. Our second approach, using a mechanistic bioaccumulation model, confirmed these positive effects on the body burdens but suggested lower effects of migration, opportunistic feeding, and TL (1.55, 2.39, and 2.38) than did our statistical analysis. These two independent approaches demonstrate that the effects of migration and opportunistic feeding on seabird body burdens can be similar to that of an increase of one TL and should therefore be accounted for in future analyses.

  18. Mono-, di-, and trichlorinated biphenyls (PCB 1-PCB 39) in the indoor air of office rooms and their relevance on human blood burden.

    Science.gov (United States)

    Kraft, M; Sievering, S; Grün, L; Rauchfuss, K

    2018-05-01

    Exposure to polychlorinated biphenyls (PCBs) from indoor air can lead to a significant increase in lower chlorinated congeners in human blood. Lower chlorinated congeners with short biological half-lives can exhibit an indirect genotoxic potential via their highly reactive metabolites. However, little is known about their occurrence in indoor air and, therefore, about the effects of possible exposure to these congeners. We analyzed all mono-, di-, and trichlorinated biphenyls in the indoor air of 35 contaminated offices, as well as in the blood of the 35 individuals worked in these offices for a minimum of 2 years. The median concentration of total PCB in the indoor air was 479 ng/m 3 . The most prevalent PCBs in the indoor air samples were the trichlorinated congeners PCB 31, PCB 18, and PCB 28, with median levels of 39, 31, and 26 ng/m 3 , respectively. PCB 8 was the most prevalent dichlorinated congener (median: 9.1 ng/m 3 ). Monochlorinated biphenyls were not detected in relevant concentrations. In the blood samples, the most abundant congener was PCB 28; nearly 90% of all mono-, di-, and trichlorinated congeners were attributed to this congener (median: 12 ng/g blood lipid). © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  19. Behavioral changes following PCB 153 exposure in the Spontaneously Hypertensive rat – an animal model of Attention-Deficit/Hyperactivity disorder

    Science.gov (United States)

    2014-01-01

    Background Attention-Deficit/Hyperactivity Disorder (ADHD) is a behavioral disorder affecting 3-5% of children. Although ADHD is highly heritable, environmental factors like exposure during early development to various toxic substances like polychlorinated biphenyls (PCBs) may contribute to the prevalence. PCBs are a group of chemical industrial compounds with adverse effects on neurobiological and cognitive functioning, and may produce behavioral impairments that share significant similarities with ADHD. The present study examined the relation between exposure to PCB 153 and changes in ADHD-like behavior in an animal model of ADHD, the spontaneously hypertensive rats (SHR/NCrl), and in Wistar Kyoto (WKY/NHsd) controls. Methods SHR/NCrl and WKY/NHsd, males and females, were orally given PCB 153 dissolved in corn oil at around postnatal day (PND) 8, 14, and 20 at a dosage of 1, 3 or 6 mg/kg bodyweight at each exposure. The control groups were orally administered corn oil only. The animals were behaviorally tested for exposure effects from PND 37 to 64 using an operant procedure. Results Exposure to PCB 153 was associated with pronounced and long-lasting behavioral changes in SHR/NCrl. Exposure effects in the SHR/NCrl depended on dose, where 1 mg/kg tended to reduce ADHD-like behaviors and produce opposite behavioral effects compared to 3 mg/kg and 6 mg/kg, especially in the females. In the WKY/NHsd controls and for the three doses tested, PCB 153 exposure produced a few specific behavioral changes only in males. The data suggest that PCB 153 exposure interacts with strain and sex, and also indicate a non-linear dose–response relation for the behaviors observed. Conclusions Exposure to PCB 153 seems to interact with several variables including strain, sex, dose, and time of testing. To the extent that the present findings can be generalized to humans, exposure effects of PCB 153 on ADHD behavior depends on amount of exposure, where high doses may aggravate ADHD

  20. Semi-definite Programming: methods and algorithms for energy management

    International Nuclear Information System (INIS)

    Gorge, Agnes

    2013-01-01

    The present thesis aims at exploring the potentialities of a powerful optimization technique, namely Semi-definite Programming, for addressing some difficult problems of energy management. We pursue two main objectives. The first one consists of using SDP to provide tight relaxations of combinatorial and quadratic problems. A first relaxation, called 'standard' can be derived in a generic way but it is generally desirable to reinforce them, by means of tailor-made tools or in a systematic fashion. These two approaches are implemented on different models of the Nuclear Outages Scheduling Problem, a famous combinatorial problem. We conclude this topic by experimenting the Lasserre's hierarchy on this problem, leading to a sequence of semi-definite relaxations whose optimal values tends to the optimal value of the initial problem. The second objective deals with the use of SDP for the treatment of uncertainty. We investigate an original approach called 'distributionally robust optimization', that can be seen as a compromise between stochastic and robust optimization and admits approximations under the form of a SDP. We compare the benefits of this method w.r.t classical approaches on a demand/supply equilibrium problem. Finally, we propose a scheme for deriving SDP relaxations of MISOCP and we report promising computational results indicating that the semi-definite relaxation improves significantly the continuous relaxation, while requiring a reasonable computational effort. SDP therefore proves to be a promising optimization method that offers great opportunities for innovation in energy management. (author)

  1. Methods for external event screening quantification: Risk Methods Integration and Evaluation Program (RMIEP) methods development

    International Nuclear Information System (INIS)

    Ravindra, M.K.; Banon, H.

    1992-07-01

    In this report, the scoping quantification procedures for external events in probabilistic risk assessments of nuclear power plants are described. External event analysis in a PRA has three important goals; (1) the analysis should be complete in that all events are considered; (2) by following some selected screening criteria, the more significant events are identified for detailed analysis; (3) the selected events are analyzed in depth by taking into account the unique features of the events: hazard, fragility of structures and equipment, external-event initiated accident sequences, etc. Based on the above goals, external event analysis may be considered as a three-stage process: Stage I: Identification and Initial Screening of External Events; Stage II: Bounding Analysis; Stage III: Detailed Risk Analysis. In the present report, first, a review of published PRAs is given to focus on the significance and treatment of external events in full-scope PRAs. Except for seismic, flooding, fire, and extreme wind events, the contributions of other external events to plant risk have been found to be negligible. Second, scoping methods for external events not covered in detail in the NRC's PRA Procedures Guide are provided. For this purpose, bounding analyses for transportation accidents, extreme winds and tornadoes, aircraft impacts, turbine missiles, and chemical release are described

  2. A method of numerically controlled machine part programming

    Science.gov (United States)

    1970-01-01

    Computer program is designed for automatically programmed tools. Preprocessor computes desired tool path and postprocessor computes actual commands causing machine tool to follow specific path. It is used on a Cincinnati ATC-430 numerically controlled machine tool.

  3. The neurotoxicant PCB-95 by increasing the neuronal transcriptional repressor REST down-regulates caspase-8 and increases Ripk1, Ripk3 and MLKL expression determining necroptotic neuronal death.

    Science.gov (United States)

    Guida, Natascia; Laudati, Giusy; Serani, Angelo; Mascolo, Luigi; Molinaro, Pasquale; Montuori, Paolo; Di Renzo, Gianfranco; Canzoniero, Lorella M T; Formisano, Luigi

    2017-10-15

    Our previous study showed that the environmental neurotoxicant non-dioxin-like polychlorinated biphenyl (PCB)-95 increases RE1-silencing transcription factor (REST) expression, which is related to necrosis, but not apoptosis, of neurons. Meanwhile, necroptosis is a type of a programmed necrosis that is positively regulated by receptor interacting protein kinase 1 (RIPK1), RIPK3 and mixed lineage kinase domain-like (MLKL) and negatively regulated by caspase-8. Here we evaluated whether necroptosis contributes to PCB-95-induced neuronal death through REST up-regulation. Our results demonstrated that in cortical neurons PCB-95 increased RIPK1, RIPK3, and MLKL expression and decreased caspase-8 at the gene and protein level. Furthermore, the RIPK1 inhibitor necrostatin-1 or siRNA-mediated RIPK1, RIPK3 and MLKL expression knockdown significantly reduced PCB-95-induced neuronal death. Intriguingly, PCB-95-induced increases in RIPK1, RIPK3, MLKL expression and decreases in caspase-8 expression were reversed by knockdown of REST expression with a REST-specific siRNA (siREST). Notably, in silico analysis of the rat genome identified a REST consensus sequence in the caspase-8 gene promoter (Casp8-RE1), but not the RIPK1, RIPK3 and MLKL promoters. Interestingly, in PCB-95-treated neurons, REST binding to the Casp8-RE1 sequence increased in parallel with a reduction in its promoter activity, whereas under the same experimental conditions, transfection of siREST or mutation of the Casp8-RE1 sequence blocked PCB-95-induced caspase-8 reduction. Since RIPK1, RIPK3 and MLKL rat genes showed no putative REST binding site, we assessed whether the transcription factor cAMP Responsive Element Binding Protein (CREB), which has a consensus sequence in all three genes, affected neuronal death. In neurons treated with PCB-95, CREB protein expression decreased in parallel with a reduction in binding to the RIPK1, RIPK3 and MLKL gene promoter sequence. Furthermore, CREB overexpression was

  4. MULTI-CRITERIA PROGRAMMING METHODS AND PRODUCTION PLAN OPTIMIZATION PROBLEM SOLVING IN METAL INDUSTRY

    OpenAIRE

    Tunjo Perić; Željko Mandić

    2017-01-01

    This paper presents the production plan optimization in the metal industry considered as a multi-criteria programming problem. We first provided the definition of the multi-criteria programming problem and classification of the multicriteria programming methods. Then we applied two multi-criteria programming methods (the STEM method and the PROMETHEE method) in solving a problem of multi-criteria optimization production plan in a company from the metal industry. The obtained resul...

  5. Levels and trends of PCB 28, PCB 153 and DDE in breast milk from primiparae women in Uppsala County, Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Darnerud, P.O.; Lignell, S.; Atuma, S.; Aune, M.; Glynn, A. [National Food Administration, Uppsala (Sweden); Cnattingius, S. [Dept. of Epidemiology, Karolinska Inst., Stockholm (Sweden)

    2004-09-15

    Since 1996, the Swedish NFA has made recurrent measurements of levels of selected POPs, chiefly PCBs, dioxins and persistent pesticides (e.g. DDTs), in human breast milk. The analyses were made on individual basis, which offer possibility to adjust the time trends in POP levels for differences among the participating women in life-style or other factors that could affect the levels in breast milk. The ambition with the NFA sampling is to follow changes in the levels of these environmental contaminants in human breast milk and to continue the Swedish time trend measurements that was started in the 1970s. The measured levels will be used as base for evaluation of possible health risks for the mother and in particular for the breastfed infant. This report presents breast milk results from 1996 to 2003, concentrating on the selected PCB congeners (PCB 28 and 153) and p,p'-DDE. The reason for selecting these compounds are the data showing differences in e.g. sources and persistence, which could make them interesting type substances for larger groups of compounds.

  6. Foetal uptake of coplanar polychlorinated biphenyl (PCB) congeners in mice

    International Nuclear Information System (INIS)

    Darnerud, P.O.; Sinjari, T.; Joensson, C.J.

    1996-01-01

    Earlier studies have shown that the Ah-receptor binding polychlorinated biphenyl (PCB) congener 3,3',4,4'-tetrachlorobiphenyl (IUPAC number CB-77) accumulated as hydroxy and methylsulphone metabolites in late gestational mice foetuses. In the present paper the foetal accumulation potential in mice of other dioxin-like PCB congeners was studied: 3,3'4,4',4-pentachlorobiphenyl, 3,3'4,4'5,5'-hexachlorobiphenyl and 2,3,3',4,4'-pentachlorobiphenyl (IUPAC numbers CB-126, CB-169, CB-105, to some extent dioxin-like) were compared to results of CB-77 (all congeners 14 C-labelled and in equimolar doses (2.0 μmol/kg body wt.)). CB-77 resulted in the comparatively strongest foetal 14 C-accumulation, when measured in plasma or whole body homogenate four days after administration (day 17 of pregnancy); the plasma 14 C-values (calculated as pmol/g wet wt.) were 760, 130, 60 and 40 for CB-77, -126, 105 and -169, respectively, and the CB-77 derived radioactivity in the foetal compartment was 3.6% of administered dose (i.e. a considerable portion of the remaining maternal body radioactivity). Thin-layer chromatography (TLC) results, suggesting extensive CB-77 metabolism and foetal metabolite uptake, support earlier findings. The effects of CB-77 and CB-169 on foetal 7-ethoxyresorufin-O-deethylase (EROD) activities (day 17 of gestation; two days after 5 mg/kg body wt. dose (14.0-17.0 μmol/kg body wt.)) was about 20 times lower than of CB-126. In the dam, high radioactivity levels were observed int he liver and fat (highest concentrations found in CB-126 and CB-105, respectively). Strain comparison - foetal 14 C-uptake (four days after administration of CB-77) in C57BL mice was almost five times higher than in NMRI - may be correlated to earlier observed differences in EROD activities between these strains. The present results indicate that congener and strain differences exist regarding both foetal and maternal distribution patterns of coplanar PCB congeners and point out the

  7. 2,2',3,3',6,6'-Hexachlorobiphenyl (PCB 136) is Enantioselectively Oxidized to Hydroxylated Metabolites by Rat Liver Microsomes

    Science.gov (United States)

    Wu, Xianai; Pramanik, Ananya; Duffel, Michael W.; Hrycay, Eugene G.; Bandiera, Stelvio M.; Lehmler, Hans-Joachim; Kania-Korwel, Izabela

    2011-01-01

    Developmental exposure to multiple-ortho substituted polychlorinated biphenyls (PCBs) causes adverse neurodevelopmental outcomes in laboratory animals and humans by mechanisms involving the sensitization of Ryanodine receptors (RyRs). In the case of PCB 136, the sensitization of RyR is enantiospecific, with only (-)-PCB 136 being active. However, the role of enantioselective metabolism in the developmental neurotoxicity of PCB 136 is poorly understood. The present study employed hepatic microsomes from phenobarbital (PB-), dexamethasone (DEX-) and corn oil (VEH-)treated male Sprague-Dawley rats to investigate the hypothesis that PCB 136 atropisomers are enantioselectively metabolized by P450 enzymes to potentially neurotoxic, hydroxylated PCB 136 metabolites. The results demonstrated the time- and isoform-dependent formation of three metabolites, with 5-OH-PCB 136 (2,2',3,3',6,6'-hexachlorobiphenyl-5-ol) being the major metabolite. The formation of 5-OH-PCB 136 increased with the activity of P450 2B enzymes in the microsomal preparation, which is consistent with PCB 136 metabolism by rat P450 2B1. The minor metabolite 4-OH-PCB 136 (2,2',3,3',6,6'-hexachlorobiphenyl-4-ol) was produced by a currently unidentified P450 enzymes. An enantiomeric enrichment of (-)-PCB 136 was observed in microsomal incubations due to the preferential metabolism of (+)-PCB 136 to the corresponding 5-OH-PCB 136 (2,2',3,3',6,6'-hexachlorobiphenyl-5-ol) atropisomer. 4-OH-PCB 136 displayed an enrichment of the atropisomer formed from (-)-PCB 136; however, the enrichment of this metabolite atropisomer didn't affect the enantiomeric enrichment of the parent PCB because 4-OH-PCB 136 is only a minor metabolite. Although the formation of 5- and 4-OH-PCB 136 atropisomers increased with time, the enantioselective formation of the OH-PCB metabolites resulted in constant enantiomeric enrichment, especially at later incubation times. These observations not only demonstrate that the chiral signatures of

  8. PREDICTION OF MEAT PRODUCT QUALITY BY THE MATHEMATICAL PROGRAMMING METHODS

    Directory of Open Access Journals (Sweden)

    A. B. Lisitsyn

    2016-01-01

    Full Text Available Abstract Use of the prediction technologies is one of the directions of the research work carried out both in Russia and abroad. Meat processing is accompanied by the complex physico-chemical, biochemical and mechanical processes. To predict the behavior of meat raw material during the technological processing, a complex of physico-technological and structural-mechanical indicators, which objectively reflects its quality, is used. Among these indicators are pH value, water binding and fat holding capacities, water activity, adhesiveness, viscosity, plasticity and so on. The paper demonstrates the influence of animal proteins (beef and pork on the physico-chemical and functional properties before and after thermal treatment of minced meat made from meat raw material with different content of the connective and fat tissues. On the basis of the experimental data, the model (stochastic dependence parameters linking the quantitative resultant and factor variables were obtained using the regression analysis, and the degree of the correlation with the experimental data was assessed. The maximum allowable levels of meat raw material replacement with animal proteins (beef and pork were established by the methods of mathematical programming. Use of the information technologies will significantly reduce the costs of the experimental search and substantiation of the optimal level of replacement of meat raw material with animal proteins (beef, pork, and will also allow establishing a relationship of product quality indicators with quantity and quality of minced meat ingredients.

  9. Enantioselective semi-preparative HPLC separation of PCB metabolites and their absolute structures determined by electronic and vibrational circular dichroism

    Energy Technology Data Exchange (ETDEWEB)

    Tuan, H.P.; Larsson, C.; Huehnerfuss, H. [Hamburg Univ. (Germany). Inst. fuer Organische Chemie; Hoffmann, F.; Froeba, M. [Giessen Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie; Bergmann, Aa. [Stockholm Univ. (Sweden). Dept. of Environmental Chemistry

    2004-09-15

    The present paper represents a first result of an ongoing systematic study of atropisomeric methylsulfonyl, methylthionyl, hydroxy, and methoxy metabolites of environmentally most relevant PCBs. This involves semi-preparative enantioselective HPLC separation to obtain pure atropisomers from synthesized PCB metabolite standards, their configuration estimation using the electronic circular dichroism (UV-CD) method and the determination / confirmation of these absolute configurations applying the combined vibrational circular dichroism (VCD) / ab initio approach. The following substances have been investigated: 4-HO-, 4-MeO-, 4-MeS-, 4-MeSO2-, 3-MeS- and 3-MeSO{sub 2}-CB149.

  10. Dynamics of PCB removal and detoxification in historically contaminated soils amended with activated carbon

    Energy Technology Data Exchange (ETDEWEB)

    Vasilyeva, Galina K., E-mail: gkvasilyeva@issp.psn.r [Institute of Physicochemical and Biological Problems in Soil Science, Russian Academy of Sciences, Pushchino 142290 (Russian Federation); Strijakova, Elena R. [Institute of Physicochemical and Biological Problems in Soil Science, Russian Academy of Sciences, Pushchino 142290 (Russian Federation); Nikolaeva, Svetlana N.; Lebedev, Albert T. [Chemistry Department of Moscow State University, Moscow (Russian Federation); Shea, Patrick J. [School of Natural Resources, University of Nebraska-Lincoln (United States); Department of Environmental, Agricultural and Occupational Health, University of Nebraska Medical Center, Lincoln, NE 68583-0817 (United States)

    2010-03-15

    Activated carbon (AC) can help overcome toxicity of pollutants to microbes and facilitate soil bioremediation. We used this approach to treat a Histosol and an Alluvial soil historically contaminated with PCB (4190 and 1585 mg kg{sup -1}, respectively; primarily tri-, tetra- and pentachlorinated congeners). Results confirmed PCB persistence; reductions in PCB extractable from control and AC-amended soils were mostly due to a decrease in tri- and to some extent tetrachlorinated congeners as well as formation of a bound fraction. Mechanisms of PCB binding by soil and AC were different. In addition to microbial degradation of less chlorinated congeners, we postulate AC catalyzed dechlorination of higher chlorinated congeners. A large decrease in bioavailable PCB in AC-amended soils was demonstrated by greater clover germination and biomass. Phytotoxicity was low in treated soils but remained high in untreated soils for the duration of a 39-month experiment. These observations indicate the utility of AC for remediation of soils historically contaminated with PCB. - Activated carbon promotes remediation of soils historically contaminated with PCB.

  11. PCB pollution continues to impact populations of orcas and other dolphins in European waters

    Science.gov (United States)

    Jepson, Paul D.; Deaville, Rob; Barber, Jonathan L.; Aguilar, Àlex; Borrell, Asunción; Murphy, Sinéad; Barry, Jon; Brownlow, Andrew; Barnett, James; Berrow, Simon; Cunningham, Andrew A.; Davison, Nicholas J.; Ten Doeschate, Mariel; Esteban, Ruth; Ferreira, Marisa; Foote, Andrew D.; Genov, Tilen; Giménez, Joan; Loveridge, Jan; Llavona, Ángela; Martin, Vidal; Maxwell, David L.; Papachlimitzou, Alexandra; Penrose, Rod; Perkins, Matthew W.; Smith, Brian; de Stephanis, Renaud; Tregenza, Nick; Verborgh, Philippe; Fernandez, Antonio; Law, Robin J.

    2016-01-01

    Organochlorine (OC) pesticides and the more persistent polychlorinated biphenyls (PCBs) have well-established dose-dependent toxicities to birds, fish and mammals in experimental studies, but the actual impact of OC pollutants on European marine top predators remains unknown. Here we show that several cetacean species have very high mean blubber PCB concentrations likely to cause population declines and suppress population recovery. In a large pan-European meta-analysis of stranded (n = 929) or biopsied (n = 152) cetaceans, three out of four species:- striped dolphins (SDs), bottlenose dolphins (BNDs) and killer whales (KWs) had mean PCB levels that markedly exceeded all known marine mammal PCB toxicity thresholds. Some locations (e.g. western Mediterranean Sea, south-west Iberian Peninsula) are global PCB “hotspots” for marine mammals. Blubber PCB concentrations initially declined following a mid-1980s EU ban, but have since stabilised in UK harbour porpoises and SDs in the western Mediterranean Sea. Some small or declining populations of BNDs and KWs in the NE Atlantic were associated with low recruitment, consistent with PCB-induced reproductive toxicity. Despite regulations and mitigation measures to reduce PCB pollution, their biomagnification in marine food webs continues to cause severe impacts among cetacean top predators in European seas.

  12. PCB pollution continues to impact populations of orcas and other dolphins in European waters.

    Science.gov (United States)

    Jepson, Paul D; Deaville, Rob; Barber, Jonathan L; Aguilar, Àlex; Borrell, Asunción; Murphy, Sinéad; Barry, Jon; Brownlow, Andrew; Barnett, James; Berrow, Simon; Cunningham, Andrew A; Davison, Nicholas J; Ten Doeschate, Mariel; Esteban, Ruth; Ferreira, Marisa; Foote, Andrew D; Genov, Tilen; Giménez, Joan; Loveridge, Jan; Llavona, Ángela; Martin, Vidal; Maxwell, David L; Papachlimitzou, Alexandra; Penrose, Rod; Perkins, Matthew W; Smith, Brian; de Stephanis, Renaud; Tregenza, Nick; Verborgh, Philippe; Fernandez, Antonio; Law, Robin J

    2016-01-14

    Organochlorine (OC) pesticides and the more persistent polychlorinated biphenyls (PCBs) have well-established dose-dependent toxicities to birds, fish and mammals in experimental studies, but the actual impact of OC pollutants on European marine top predators remains unknown. Here we show that several cetacean species have very high mean blubber PCB concentrations likely to cause population declines and suppress population recovery. In a large pan-European meta-analysis of stranded (n = 929) or biopsied (n = 152) cetaceans, three out of four species:- striped dolphins (SDs), bottlenose dolphins (BNDs) and killer whales (KWs) had mean PCB levels that markedly exceeded all known marine mammal PCB toxicity thresholds. Some locations (e.g. western Mediterranean Sea, south-west Iberian Peninsula) are global PCB "hotspots" for marine mammals. Blubber PCB concentrations initially declined following a mid-1980s EU ban, but have since stabilised in UK harbour porpoises and SDs in the western Mediterranean Sea. Some small or declining populations of BNDs and KWs in the NE Atlantic were associated with low recruitment, consistent with PCB-induced reproductive toxicity. Despite regulations and mitigation measures to reduce PCB pollution, their biomagnification in marine food webs continues to cause severe impacts among cetacean top predators in European seas.

  13. Chamber study of PCB emissions from caulking materials and light ballasts.

    Science.gov (United States)

    Liu, Xiaoyu; Guo, Zhishi; Krebs, Kenneth A; Stinson, Rayford A; Nardin, Joshua A; Pope, Robert H; Roache, Nancy F

    2015-10-01

    The emissions of polychlorinated biphenyl (PCB) congeners from thirteen caulk samples were tested in a micro-chamber system. Twelve samples were from PCB-contaminated buildings and one was prepared in the laboratory. Nineteen light ballasts collected from buildings that represent 13 different models from five manufacturers were tested in 53-L environmental chambers. The rates of PCB congener emissions from caulking materials and light ballasts were determined. Several factors that may have affected the emission rates were evaluated. The experimentally determined emission factors showed that, for a given PCB congener, there is a linear correlation between the emission factor and the concentration of the PCB congener in the source. Furthermore, the test results showed that an excellent log-linear correlation exists between the normalized emission factor and the vapor pressure (coefficient of determination, r(2)⩾0.8846). The PCB congener emissions from ballasts at or near room temperature were relatively low with or without electrical load. However, the PCB congener emission rates increased significantly as the temperature increased. The results of this research provide new data and models for ranking the primary sources of PCBs and supports the development and refinement of exposure assessment models for PCBs. Published by Elsevier Ltd.

  14. Stereoselective bioaccumulation of chiral PCB 91 in earthworm and its metabolomic and lipidomic responses.

    Science.gov (United States)

    He, Zeying; Wang, Yuehua; Zhang, Yanwei; Cheng, Haiyan; Liu, Xiaowei

    2018-07-01

    Stereoselective bioaccumulation, elimination, metabolomic and lipidomic responses of earthworm Eisenia fetida exposed to chiral polychlorinated biphenyl (PCB) 91 in an earthworm-soil system were investigated. Preferential bioaccumulation of (-)-PCB 91 and elimination of (+)-PCB 91 were observed following 50 and 500 μg/kg dwt exposures. Enantiomer fraction (EF) values decreased over time during the uptake and elimination periods. Metabolomics and lipidomics techniques based on ultra-performance liquid chromatography/quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS) revealed significant changes in 108 metabolites after earthworms exposure to (+)-, (-)-, and (±)-PCB 91, compared to control groups. Forty two of these metabolites were identified as amino acids, nucleosides, fatty acids, dicarboxylic acids, vitamins or others. Lysophospholipids including six lysophosphatidylcholines (LPC), six lysophosphatidylethanolamine (LPE), eight lysophosphatidylinositol (LPI) and five lysophosphatidylserine (LPS) were also differentially expressed between exposure and control groups. Alterations in the levels of metabolites and lipids indicated stereoselective effects of chiral PCB 91 on earthworm amino acid, energy, and nucleotide metabolism, neurodevelopment and gene expression. Overall, the effects of (+)-PCB 91 were more pronounced than that of (-)- and (±)-PCB 91. Copyright © 2018 Elsevier Ltd. All rights reserved.

  15. Dynamics of PCB removal and detoxification in historically contaminated soils amended with activated carbon

    International Nuclear Information System (INIS)

    Vasilyeva, Galina K.; Strijakova, Elena R.; Nikolaeva, Svetlana N.; Lebedev, Albert T.; Shea, Patrick J.

    2010-01-01

    Activated carbon (AC) can help overcome toxicity of pollutants to microbes and facilitate soil bioremediation. We used this approach to treat a Histosol and an Alluvial soil historically contaminated with PCB (4190 and 1585 mg kg -1 , respectively; primarily tri-, tetra- and pentachlorinated congeners). Results confirmed PCB persistence; reductions in PCB extractable from control and AC-amended soils were mostly due to a decrease in tri- and to some extent tetrachlorinated congeners as well as formation of a bound fraction. Mechanisms of PCB binding by soil and AC were different. In addition to microbial degradation of less chlorinated congeners, we postulate AC catalyzed dechlorination of higher chlorinated congeners. A large decrease in bioavailable PCB in AC-amended soils was demonstrated by greater clover germination and biomass. Phytotoxicity was low in treated soils but remained high in untreated soils for the duration of a 39-month experiment. These observations indicate the utility of AC for remediation of soils historically contaminated with PCB. - Activated carbon promotes remediation of soils historically contaminated with PCB.

  16. An iterative method for tri-level quadratic fractional programming problems using fuzzy goal programming approach

    Science.gov (United States)

    Kassa, Semu Mitiku; Tsegay, Teklay Hailay

    2017-08-01

    Tri-level optimization problems are optimization problems with three nested hierarchical structures, where in most cases conflicting objectives are set at each level of hierarchy. Such problems are common in management, engineering designs and in decision making situations in general, and are known to be strongly NP-hard. Existing solution methods lack universality in solving these types of problems. In this paper, we investigate a tri-level programming problem with quadratic fractional objective functions at each of the three levels. A solution algorithm has been proposed by applying fuzzy goal programming approach and by reformulating the fractional constraints to equivalent but non-fractional non-linear constraints. Based on the transformed formulation, an iterative procedure is developed that can yield a satisfactory solution to the tri-level problem. The numerical results on various illustrative examples demonstrated that the proposed algorithm is very much promising and it can also be used to solve larger-sized as well as n-level problems of similar structure.

  17. Males exceed females in PCB concentrations of cisco (Coregonus artedi) from Lake Superior

    Science.gov (United States)

    Madenjian, Charles P.; Yule, Daniel L.; Chernyak, Sergei M.; Begnoche, Linda J.; Berglund, Eric K.; Isaac, Edmund J.

    2014-01-01

    We determined whole-fish polychlorinated biphenyl (PCB) concentrations of 25 male and 25 female age-7 ciscoes (Coregonus artedi) captured from a spawning aggregation in Thunder Bay, Lake Superior, during November 2010. We also determined PCB concentrations in the ovaries and somatic tissue of five additional female ciscoes (ages 5–22). All 55 of these ciscoes were in ripe or nearly ripe condition. Bioenergetics modeling was used to determine the contribution of the growth dilution effect toward a difference in PCB concentrations between the sexes, as females grew substantially faster than males. Results showed that the PCB concentration of males (mean = 141 ng/g) was 43% greater than that of females (mean = 98 ng/g), and this difference was highly significant (P ovaries and the somatic tissue of the five females were 135 and 100 ng/g, respectively. Based on these PCB determinations for the ovaries and somatic tissue, we concluded that release of eggs by females at previous spawnings was not a contributing factor to the observed difference in PCB concentrations between the sexes. Bioenergetics modeling results indicated that the growth dilution effect could explain males being higher than females in PCB concentration by only 3–7%. We concluded that the higher PCB concentration in males was most likely due to higher rate of energy expenditure, originating from greater activity and a higher resting metabolic rate. Mean PCB concentration in the cisco eggs was well below the U. S. Food and Drug Administration and Ontario Ministry of Environment guidelines of 2000 and 844 ng/g, respectively, and this finding may have implications for the cisco roe fishery currently operating in Lake Superior.

  18. Prenatal and postnatal serum PCB concentrations and cochlear function in children at 45 months of age.

    Science.gov (United States)

    Jusko, Todd A; Sisto, Renata; Iosif, Ana-Maria; Moleti, Arturo; Wimmerová, Sonˇa; Lancz, Kinga; Tihányi, Juraj; Sovčiková, Eva; Drobná, Beata; Palkovičová, L'ubica; Jurečková, Dana; Thevenet-Morrison, Kelly; Verner, Marc-André; Sonneborn, Dean; Hertz-Picciotto, Irva; Trnovec, Tomáš

    2014-11-01

    Some experimental and human data suggest that exposure to polychlorinated biphenyls (PCBs) may induce ototoxicity, though results of previous epidemiologic studies are mixed and generally focus on either prenatal or postnatal PCB concentrations exclusively. Our aim was to evaluate the association between pre- and postnatal PCB concentrations in relation to cochlear status, assessed by distortion product otoacoustic emissions (DPOAEs), and to further clarify the critical periods in development where cochlear status may be most susceptible to PCBs. A total of 351 children from a birth cohort in eastern Slovakia underwent otoacoustic testing at 45 months of age. Maternal pregnancy, cord, and child 6-, 16-, and 45-month blood samples were collected and analyzed for PCB concentrations. At 45 months of age, DPOAEs were assessed at 11 frequencies in both ears. Multivariate, generalized linear models were used to estimate the associations between PCB concentrations at different ages and DPOAEs, adjusting for potential confounders. Maternal and cord PCB-153 concentrations were not associated with DPOAEs at 45 months. Higher postnatal PCB concentrations at 6-, 16-, and 45-months of age were associated with lower (poorer) DPOAE amplitudes. When all postnatal PCB exposures were considered as an area-under-the-curve metric, an increase in PCB-153 concentration from the 25th to the 75th percentile was associated with a 1.6-dB SPL (sound pressure level) decrease in DPOAE amplitude (95% CI: -2.6, -0.5; p = 0.003). In this study, postnatal rather than maternal or cord PCB concentrations were associated with poorer performance on otoacoustic tests at age 45 months.

  19. Males exceed females in PCB concentrations of cisco (Coregonus artedi) from Lake Superior.

    Science.gov (United States)

    Madenjian, Charles P; Yule, Daniel L; Chernyak, Sergei M; Begnoche, Linda J; Berglund, Eric K; Isaac, Edmund J

    2014-09-15

    We determined whole-fish polychlorinated biphenyl (PCB) concentrations of 25 male and 25 female age-7 ciscoes (Coregonus artedi) captured from a spawning aggregation in Thunder Bay, Lake Superior, during November 2010. We also determined PCB concentrations in the ovaries and somatic tissue of five additional female ciscoes (ages 5-22). All 55 of these ciscoes were in ripe or nearly ripe condition. Bioenergetics modeling was used to determine the contribution of the growth dilution effect toward a difference in PCB concentrations between the sexes, as females grew substantially faster than males. Results showed that the PCB concentration of males (mean = 141 ng/g) was 43% greater than that of females (mean = 98 ng/g), and this difference was highly significant (PPCB concentrations in the ovaries and the somatic tissue of the five females were 135 and 100 ng/g, respectively. Based on these PCB determinations for the ovaries and somatic tissue, we concluded that release of eggs by females at previous spawnings was not a contributing factor to the observed difference in PCB concentrations between the sexes. Bioenergetics modeling results indicated that the growth dilution effect could explain males being higher than females in PCB concentration by only 3-7%. We concluded that the higher PCB concentration in males was most likely due to higher rate of energy expenditure, originating from greater activity and a higher resting metabolic rate. Mean PCB concentration in the cisco eggs was well below the U. S. Food and Drug Administration and Ontario Ministry of Environment guidelines of 2000 and 844 ng/g, respectively, and this finding may have implications for the cisco roe fishery currently operating in Lake Superior. Published by Elsevier B.V.

  20. Developmental exposure to an environmental PCB mixture delays the propagation of electrical kindling from the amygdala.

    Science.gov (United States)

    Bandara, Suren B; Sadowski, Renee N; Schantz, Susan L; Gilbert, Mary E

    2017-01-01

    Developmental PCB exposure impairs hearing and induces brainstem audiogenic seizures in adult offspring. The degree to which this enhanced susceptibility to seizure is manifest in other brain regions has not been examined. Thus, electrical kindling of the amygdala was used to evaluate the effect of developmental exposure to an environmentally relevant PCB mixture on seizure susceptibility in the rat. Female Long-Evans rats were dosed orally with 0 or 6mg/kg/day of the PCB mixture dissolved in corn oil vehicle 4 weeks prior to mating and continued through gestation and up until postnatal day (PND) 21. On PND 21, pups were weaned, and two males from each litter were randomly selected for the kindling study. As adults, the male rats were implanted bilaterally with electrodes in the basolateral amygdala. For each animal, afterdischarge (AD) thresholds in the amygdala were determined on the first day of testing followed by once daily stimulation at a standard 200μA stimulus intensity until three stage 5 generalized seizures (GS) ensued. Developmental PCB exposure did not affect the AD threshold or total cumulative AD duration, but PCB exposure did increase the latency to behavioral manifestations of seizure propagation. PCB exposed animals required significantly more stimulations to reach stage 2 seizures compared to control animals, indicating attenuated focal (amygdala) excitability. A delay in kindling progression in the amygdala stands in contrast to our previous finding of increased susceptibility to brainstem-mediated audiogenic seizures in PCB-exposed animals in response to a an intense auditory stimulus. These seemingly divergent results are not unexpected given the distinct source, type, and mechanistic underpinnings of these different seizure models. A delay in epileptogenesis following focal amygdala stimulation may reflect a decrease in neuroplasticity following developmental PCB exposure consistent with reductions in use-dependent synaptic plasticity that

  1. Hanford environmental analytical methods (methods as of March 1990)

    International Nuclear Information System (INIS)

    Goheen, S.D.; McCulloch, M.; Daniel, J.L.

    1993-05-01

    Information is provided on the techniques employed towards the chemical analysis of volatile, semi-volatile matter, pesticides and PCB's at the Hanford Reservation. Sample preparation methods are included

  2. HCB, PCB, PCDD and PCDF emissions from ships

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, David

    2004-10-01

    Since current estimates of hexachlorobenzene (HCB), polychlorinated biphenyls (PCB), dioxins (PCDD), and furans (PCDF) from ships are based on a relatively limited and old data set, an update of these emission factors has been outlined as a target towards improved emission inventories. Consequently and as an assignment from the Swedish Environmental Protection Agency, the Swedish Environmental Research Institute has undertaken a comprehensive study focusing on these emissions from three different ships during December 2003 to March 2004. Analyses were performed on 12 exhaust samples, 3 fuel oil samples and 3 lubricating oil samples from a representative selection of diesel engine models, fuel types and during different 'real-world' operating conditions. The measured emissions correspond reasonably well with previous measurements. The data suggests however that previous PCDD/PCDF emission factors are probably too high. As expected the greatest emissions were observed during main engine start-up periods and for engines using heavier fuel oils. Total emissions for 2002, using the revised emission factors, have been calculated based on Swedish sold marine fuels and also for geographical areas of national importance. In terms of their toxic equivalence (WHO-TEQ), the PCDD/PCDF emissions from ships using Swedish fuels are small (0.37 - 0.85 g TEQ) in comparison to recent estimates for the national total (ca. 45 g TEQ). Emissions from other land-based diesel engines (road vehicles, off-road machinery, military vehicles and locomotives) are estimated to contribute a further 0.18-0.42 g TEQ. Similarly HCB and PCB emissions from these sources are small compared to 1995 national emission inventories.

  3. Root Causes of Component Failures Program: Methods and applications

    International Nuclear Information System (INIS)

    Satterwhite, D.G.; Cadwallader, L.C.; Vesely, W.E.; Meale, B.M.

    1986-12-01

    This report contains information pertaining to definitions, methodologies, and applications of root cause analysis. Of specific interest, and highlighted throughout the discussion, are applications pertaining to current and future Nuclear Regulatory Commission (NRC) light water reactor safety programs. These applications are discussed in view of addressing specific program issues under NRC consideration and reflect current root cause analysis capabilities

  4. PCDD, PCDF, and PCB contamination of air and inhalable particulate in Rome

    International Nuclear Information System (INIS)

    Turrio-Baldassarri, L.; Carere, A.; Di Domenico, A.; Fuselli, S.; Iacovella, N.; Rodriguez, F.

    1994-01-01

    The isomer specific determination of PCDD, PCDF and PCB was carried out on samples of air and inhalable particulate from Rome. Samples were taken daily for six months and pooled to yield two samples per month. Normal PCDD + PCDF concentrations expressed in TEQ ranged from 48 to 87 fg/m 3 , while total PCB ranged from 0.1 to 1.4 ng/m 3 . The 2, 3, 7, 8-substituted PCDD and PCDF congener pattern is shown together with the PCB congener pattern. (orig.)

  5. Effect of seafood mediated PCB exposure on desaturase activity and PUFA profile in Faroese septuagenarians

    DEFF Research Database (Denmark)

    Tøttenborg, Sandra Søgaard; Choi, Anna L; Bjerve, Kristian S

    2015-01-01

    and desaturase activity. In multiple regression models, PCB exposure was inversely related to the estimated Δ6 desaturase activity resulting in accumulation of precursor fatty acids and decrease in the corresponding product PUFAs. A positive association between PCB and Δ5 desaturation was also found. A relative...... increase in EA was also observed, though only in the third tertile of PCB exposure. Non-linear relationships between the exposure and the desaturase activity were not found. Consuming fish and seafood may not be translated into beneficial fatty acid profiles if the diet simultaneously causes exposure...

  6. Nuclear power reactor analysis, methods, algorithms and computer programs

    International Nuclear Information System (INIS)

    Matausek, M.V

    1981-01-01

    Full text: For a developing country buying its first nuclear power plants from a foreign supplier, disregarding the type and scope of the contract, there is a certain number of activities which have to be performed by local stuff and domestic organizations. This particularly applies to the choice of the nuclear fuel cycle strategy and the choice of the type and size of the reactors, to bid parameters specification, bid evaluation and final safety analysis report evaluation, as well as to in-core fuel management activities. In the Nuclear Engineering Department of the Boris Kidric Institute of Nuclear Sciences (NET IBK) the continual work is going on, related to the following topics: cross section and resonance integral calculations, spectrum calculations, generation of group constants, lattice and cell problems, criticality and global power distribution search, fuel burnup analysis, in-core fuel management procedures, cost analysis and power plant economics, safety and accident analysis, shielding problems and environmental impact studies, etc. The present paper gives the details of the methods developed and the results achieved, with the particular emphasis on the NET IBK computer program package for the needs of planning, construction and operation of nuclear power plants. The main problems encountered so far were related to small working team, lack of large and powerful computers, absence of reliable basic nuclear data and shortage of experimental and empirical results for testing theoretical models. Some of these difficulties have been overcome thanks to bilateral and multilateral cooperation with developed countries, mostly through IAEA. It is the authors opinion, however, that mutual cooperation of developing countries, having similar problems and similar goals, could lead to significant results. Some activities of this kind are suggested and discussed. (author)

  7. The Army Method Revisited: The Historical and Theoretical Backgrounds of the Military Intensive Language Programs.

    Science.gov (United States)

    Bayuk, Milla; Bayuk, Barry S.

    A program currently in use by the military that gives instruction in the so-called "sensitive" languages is based on the "Army Method" which was initiated in military language programs during World War II. Attention to the sensitive language program initiated a review of the programs, especially those conducted by the military intelligence schools…

  8. Frontiers in economic research on petroleum allocation using mathematical programming methods

    International Nuclear Information System (INIS)

    Rowse, J.

    1991-01-01

    This paper presents a state of the art of operations research techniques applied in petroleum allocation, namely mathematical programming methods, with principal attention directed toward linear programming and nonlinear programming (including quadratic programming). Contributions to the economics of petroleum allocation are discussed for international trade, industrial organization, regional/macro economics, public finance and natural resource/environmental economics

  9. 2,2′,3,5′,6-PENTACHLOROBIPHENYL (PCB 95) AND ITS HYDROXYLATED METABOLITES ARE ENANTIOMERICALLY ENRICHED IN FEMALE MICE

    Science.gov (United States)

    Kania-Korwel, Izabela; Barnhart, Christopher D.; Stamou, Marianna; Truong, Kim M.; El-Komy, Mohammed H.M.E.; Lein, Pamela J.; Veng-Pedersen, Peter; Lehmler, Hans-Joachim

    2012-01-01

    Epidemiological and laboratory studies link polychlorinated biphenyls and their metabolites to adverse neurodevelopmental outcomes. Several neurotoxic PCB congeners are chiral and undergo enantiomeric enrichment in mammalian species, which may modulate PCB developmental neurotoxicity. This study measures levels and enantiomeric enrichment of PCB 95 and its hydroxylated metabolites (OH-PCBs) in adult female C57Bl/6 mice following subchronic exposure to racemic PCB 95. Tissue levels of PCB 95 and OH-PCBs increased with increasing dose. Dose-dependent enantiomeric enrichment of PCB 95 was observed in brain and other tissues. OH-PCBs also displayed enantiomeric enrichment in blood and liver, but were not detected in adipose and brain. In light of data suggesting enantioselective effects of chiral PCBs on molecular targets linked to PCB developmental neurotoxicity, our observations highlight the importance of accounting for PCB and OH-PCB enantiomeric enrichment in the assessment of PCB developmental neurotoxicity. PMID:22974126

  10. IFNA approved Chinese Anaesthesia Nurse Education Program: A Delphi method.

    Science.gov (United States)

    Hu, Jiale; Fallacaro, Michael D; Jiang, Lili; Wu, Junyan; Jiang, Hong; Shi, Zhen; Ruan, Hong

    2017-09-01

    Numerous nurses work in operating rooms and recovery rooms or participate in the performance of anaesthesia in China. However, the scope of practice and the education for Chinese Anaesthesia Nurses is not standardized, varying from one geographic location to another. Furthermore, most nurses are not trained sufficiently to provide anaesthesia care. This study aimed to develop the first Anaesthesia Nurse Education Program in Mainland China based on the Educational Standards of the International Federation of Nurse Anaesthetists. The Delphi technique was applied to develop the scope of practice, competencies for Chinese Anaesthesia Nurses and education program. In 2014 the Anaesthesia Nurse Education Program established by the hospital applied for recognition by the International Federation of Nurse Anaesthetists. The Program's curriculum was evaluated against the IFNA Standards and recognition was awarded in 2015. The four-category, 50-item practice scope, and the three-domain, 45-item competency list were identified for Chinese Anaesthesia Nurses. The education program, which was established based on the International Federation of Nurse Anaesthetists educational standards and Chinese context, included nine curriculum modules. In March 2015, 13 candidates received and passed the 21-month education program. The Anaesthesia Nurse Education Program became the first program approved by the International Federation of Nurse Anaesthetists in China. Policy makers and hospital leaders can be confident that anaesthesia nurses graduating from this Chinese program will be prepared to demonstrate high level patient care as reflected in the recognition by IFNA of their adoption of international nurse anaesthesia education standards. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Numerical calculation of elastohydrodynamic lubrication methods and programs

    CERN Document Server

    Huang, Ping

    2015-01-01

    The book not only offers scientists and engineers a clear inter-disciplinary introduction and orientation to all major EHL problems and their solutions but, most importantly, it also provides numerical programs on specific application in engineering. A one-stop reference providing equations and their solutions to all major elastohydrodynamic lubrication (EHL) problems, plus numerical programs on specific applications in engineering offers engineers and scientists a clear inter-disciplinary introduction and a concise program for practical engineering applications to most important EHL problems

  12. Independent review of inappropriate identification, storage and treatment methods of polychlorinated biphenyl waste streams

    International Nuclear Information System (INIS)

    1997-07-01

    The purpose of the review was to evaluate incidents involving the inappropriate identification, storage, and treatment methods associated with polychlorinated biphenyl (PCB) waste streams originating from the V-tank system at the Test Area North (TAN). The team was instructed to perform a comprehensive review of Lockheed Martin Idaho Technologies Company (LMITCO's) compliance programs related to these incidents to assess the adequacy and effectiveness of the management program in all respects including: adequacy of the waste management program in meeting all LMITCO requirements and regulations; adequacy of policies, plans, and procedures in addressing and implementing all federal and state requirements and regulations; and compliance status of LMITCO, LMITCO contract team members, and LMITCO contract/team member subcontractor personnel with established PCB management policies, plans, and procedures. The V-Tanks are part of an intermediate waste disposal system and are located at the Technical Support Facility (TSF) at TAN at the Idaho National Engineering and Environmental Laboratory (INEEL). The IRT evaluated how a waste was characterized, managed, and information was documented; however, they did not take control of wastes or ensure followup was performed on all waste streams that may have been generated from the V-Tanks. The team has also subsequently learned that the Environmental Restoration (ER) program is revising the plans for the decontamination and decommissioning of the intermediate waste disposal system based on new information listed and PCB wastes. The team has not reviewed those in-process changes. The source of PCB in the V-Tank is suspected to be a spill of hydraulic fluid in 1968

  13. Secondary Physics, Chemistry, and Biology (PCB Teachers’ Views about In-service Training Related to Curricular Change

    Directory of Open Access Journals (Sweden)

    Fatih Çağlayan Mercan

    2015-04-01

    Full Text Available In Turkey the Physics, Chemistry and Biology (PCB curricula were renewed in 2008. However, little in-service training for teachers has been conducted to disseminate the ideas in the new curricula. The purpose of this study was to investigate PCB teachers’ views on in-service training, which may serve as the base knowledge of educational change in Turkey that can be used in further curricular development. In Istanbul 99 teachers voluntarily participated in this qualitative case study. Data were collected utilizing semi-structured interviews and analyzed by employing constant comparative analysis. The data showed that for 40% of the teachers the in-service training was insufficient: the new curricula were not introduced to them adequately. Only 7% of the teachers expressed positive views towards the in-service training. The teachers were concerned about the incompetence of the trainers and the low quality of the training programs. 20% of the teachers felt that they need to keep up to date with the new curricula and establish ways of cooperation among teachers. The results imply that educational change is more than changing the curriculum, which requires serious planning for implementation requiring a reconceptualization of in-service training as part of a larger professional development framework.

  14. A METHOD FOR SOLVING LINEAR PROGRAMMING PROBLEMS WITH FUZZY PARAMETERS BASED ON MULTIOBJECTIVE LINEAR PROGRAMMING TECHNIQUE

    OpenAIRE

    M. ZANGIABADI; H. R. MALEKI

    2007-01-01

    In the real-world optimization problems, coefficients of the objective function are not known precisely and can be interpreted as fuzzy numbers. In this paper we define the concepts of optimality for linear programming problems with fuzzy parameters based on those for multiobjective linear programming problems. Then by using the concept of comparison of fuzzy numbers, we transform a linear programming problem with fuzzy parameters to a multiobjective linear programming problem. To this end, w...

  15. Pair Programming as a Modern Method of Teaching Computer Science

    OpenAIRE

    Irena Nančovska Šerbec; Branko Kaučič; Jože Rugelj

    2008-01-01

    At the Faculty of Education, University of Ljubljana we educate future computer science teachers. Beside didactical, pedagogical, mathematical and other interdisciplinary knowledge, students gain knowledge and skills of programming that are crucial for computer science teachers. For all courses, the main emphasis is the absorption of professional competences, related to the teaching profession and the programming profile. The latter are selected according to the well-known document, the ACM C...

  16. A method for developing standard patient education program

    DEFF Research Database (Denmark)

    Lura, Carolina Bryne; Hauch, Sophie Misser Pallesgaard; Gøeg, Kirstine Rosenbeck

    2018-01-01

    for developing standard digital patient education programs for patients in self-administration of blood samples drawn from CVC. The Design Science Research Paradigm was used to develop a digital patient education program, called PAVIOSY, to increase patient safety during execution of the blood sample collection...... of the educational patient system, health professionals must be engaged early in the development of content and design phase....

  17. 77 FR 31756 - Energy Conservation Program: Alternative Efficiency Determination Methods and Alternative Rating...

    Science.gov (United States)

    2012-05-30

    ...-AC46 Energy Conservation Program: Alternative Efficiency Determination Methods and Alternative Rating... regulations authorizing the use of alternative methods of determining energy efficiency or energy consumption... alternative methods of determining energy efficiency or energy consumption of various consumer products and...

  18. MULTI-CRITERIA PROGRAMMING METHODS AND PRODUCTION PLAN OPTIMIZATION PROBLEM SOLVING IN METAL INDUSTRY

    Directory of Open Access Journals (Sweden)

    Tunjo Perić

    2017-09-01

    Full Text Available This paper presents the production plan optimization in the metal industry considered as a multi-criteria programming problem. We first provided the definition of the multi-criteria programming problem and classification of the multicriteria programming methods. Then we applied two multi-criteria programming methods (the STEM method and the PROMETHEE method in solving a problem of multi-criteria optimization production plan in a company from the metal industry. The obtained results indicate a high efficiency of the applied methods in solving the problem.

  19. Atropisomers of 2,2',3,3',6,6'-hexachlorobiphenyl (PCB 136) exhibit stereoselective effects on activation of nuclear receptors in vitro.

    Science.gov (United States)

    Pěnčíková, Kateřina; Brenerová, Petra; Svržková, Lucie; Hrubá, Eva; Pálková, Lenka; Vondráček, Jan; Lehmler, Hans-Joachim; Machala, Miroslav

    2017-11-09

    PCB 136 is an environmentally relevant chiral PCB congener, which has been found in vivo to be present in form of rotational isomers (atropisomers). Its atropselective biotransformation or neurotoxic effects linked with sensitization of ryanodine receptor suggest that it might interact also with other intracellular receptors in a stereospecific manner. However, possible atropselective effects of PCB 136 on nuclear receptor transactivation remain unknown. Therefore, in this study, atropselective effects of PCB 136 on nuclear receptors controlling endocrine signaling and/or expression of xenobiotic and steroid hormone catabolism were investigated. PCB136 atropisomers were found to exert differential effects on estrogen receptor (ER) activation; (+)-PCB 136 was estrogenic, while (-)-PCB 136 was antiestrogenic. In contrast, inhibition of androgen receptor (AR) activity was not stereospecific. Both PCB136 stereoisomers induced the constitutive androgen receptor (CAR)-dependent gene expression; however, no significant stereospecificity of PCB 136 atropisomers was observed. PCB136 was a partial inducer of the pregnane X receptor (PXR)-dependent gene expression. Here, (-)-PCB 136 was a significantly more potent inducer of PXR activity than (+)-PCB 136. Taken together, the present results indicate that at least two nuclear receptors participating in endocrine regulation or metabolism, ER and PXR, could be regulated in an atropselective manner by chiral PCB 136. The enantioselective enrichment of PCB atropisomers in animal and human tissues may thus have significant consequences for endocrine-disrupting effects of chiral ortho-substituted PCB congeners.

  20. Evaluation of PCB bioaccumulation by Lumbriculus variegatus in field-collected sediments

    Science.gov (United States)

    Sediment bioaccumulation tests with Lumbriculus variegatus were performed on polychlorinated biphenyl (PCBs) contaminated sediment samples from the Hudson, Grasse, and Fox Rivers Superfund sites with concurrent measurement of PCB concentrations in sediment interstitial water. Th...

  1. Treatment of a suspension of PCB contaminated soil using iron nanoparticles and electric current

    DEFF Research Database (Denmark)

    Comes, Helena I.; Ottosen, Lisbeth M.; Ribeiro, Alexandra B.

    2015-01-01

    Contaminated soils and sediments with polychlorinated biphenyls (PCB) are an important environmental problem due to the persistence of these synthetic aromatic compounds and to the lack of a cost-effective and sustainable remediation technology. Recently, a new experimental setup has been proposed...... using electrodialytic remediation and iron nanoparticles. The current work compares the performance of this new setup (A) with conventional electrokinetics (setup B). An historically contaminated soil with an initial PCB concentration of 258 mu g kg-1 was treated during 5, 10, 20 and 45 d using...... different amounts of iron nanoparticles in both setups A and B. A PCB removal of 83% was obtained in setup A compared with 58% of setup B. Setup A also showed additional advantages, such as a higher PCB dechlorination, in a shorter time, with lower nZVI consumption, and with the use of half of the voltage...

  2. PCB contamination and effects on benthic invertebrate communities at the Irving Whale salvage site

    National Research Council Canada - National Science Library

    Ernst, W

    2000-01-01

    ... patterns of polychlorinated biphenyl (PCB) contamination. In addition, snow crab tissue sampling, toxicity testing of sediments as well as analysis of the integrity of benthic biological communities was conducted around the Irving Whale footprint...

  3. Life Cycle Analysis for Treatment and Disposal of PCB Waste at Ashtabula and Fernald

    Energy Technology Data Exchange (ETDEWEB)

    Morris, M.I.

    2001-01-11

    This report presents the use of the life cycle analysis (LCA) system developed at Oak Ridge National Laboratory (ORNL) to assist two U.S. Department of Energy (DOE) sites in Ohio--the Ashtabula Environmental Management Project near Cleveland and the Fernald Environmental Management Project near Cincinnati--in assessing treatment and disposal options for polychlorinated biphenyl (PCB)-contaminated low-level radioactive waste (LLW) and mixed waste. We will examine, first, how the LCA process works, then look briefly at the LCA system's ''toolbox,'' and finally, see how the process was applied in analyzing the options available in Ohio. As DOE nuclear weapons facilities carry out planned decontamination and decommissioning (D&D) activities for site closure and progressively package waste streams, remove buildings, and clean up other structures that have served as temporary waste storage locations, it becomes paramount for each waste stream to have a prescribed and proven outlet for disposition. Some of the most problematic waste streams throughout the DOE complex are PCB low-level radioactive wastes (liquid and solid) and PCB low-level Resource Conservation and Recovery Act (RCRA) liquid and solid wastes. Several DOE Ohio Field Office (OH) sites have PCB disposition needs that could have an impact on the critical path of the decommissioning work of these closure sites. The Ashtabula Environmental Management Project (AEMP), an OH closure site, has an urgent problem with disposition of soils contaminated by PCB and low-level waste at the edge of the site. The Fernald Environmental Management Project (FEMP), another OH closure site, has difficulties in timely disposition of its PCB-low-level sludges and its PCB low-level RCRA sludges in order to avoid impacting the critical path of its D&D activities. Evaluation of options for these waste streams is the subject of this report. In the past a few alternatives for disposition of PCB low-level waste

  4. Life Cycle Analysis for Treatment and Disposal of PCB Waste at Ashtabula and Fernald

    International Nuclear Information System (INIS)

    Morris, M.I.

    2001-01-01

    This report presents the use of the life cycle analysis (LCA) system developed at Oak Ridge National Laboratory (ORNL) to assist two U.S. Department of Energy (DOE) sites in Ohio--the Ashtabula Environmental Management Project near Cleveland and the Fernald Environmental Management Project near Cincinnati--in assessing treatment and disposal options for polychlorinated biphenyl (PCB)-contaminated low-level radioactive waste (LLW) and mixed waste. We will examine, first, how the LCA process works, then look briefly at the LCA system's ''toolbox,'' and finally, see how the process was applied in analyzing the options available in Ohio. As DOE nuclear weapons facilities carry out planned decontamination and decommissioning (D and D) activities for site closure and progressively package waste streams, remove buildings, and clean up other structures that have served as temporary waste storage locations, it becomes paramount for each waste stream to have a prescribed and proven outlet for disposition. Some of the most problematic waste streams throughout the DOE complex are PCB low-level radioactive wastes (liquid and solid) and PCB low-level Resource Conservation and Recovery Act (RCRA) liquid and solid wastes. Several DOE Ohio Field Office (OH) sites have PCB disposition needs that could have an impact on the critical path of the decommissioning work of these closure sites. The Ashtabula Environmental Management Project (AEMP), an OH closure site, has an urgent problem with disposition of soils contaminated by PCB and low-level waste at the edge of the site. The Fernald Environmental Management Project (FEMP), another OH closure site, has difficulties in timely disposition of its PCB-low-level sludges and its PCB low-level RCRA sludges in order to avoid impacting the critical path of its D and D activities. Evaluation of options for these waste streams is the subject of this report. In the past a few alternatives for disposition of PCB low-level waste and PCB low

  5. A Birth Cohort Study of Maternal and Infant Serum PCB-153 and DDE Concentrations and Responses to Infant Tuberculosis Vaccination

    Science.gov (United States)

    Jusko, Todd A.; De Roos, Anneclaire J.; Lee, Sue Y.; Thevenet-Morrison, Kelly; Schwartz, Stephen M.; Verner, Marc-André; Murinova, Lubica Palkovicova; Drobná, Beata; Kočan, Anton; Fabišiková, Anna; Čonka, Kamil; Trnovec, Tomas; Hertz-Picciotto, Irva; Lawrence, B. Paige

    2015-01-01

    Background: Reasons for the highly variable and often poor protection conferred by the Mycobacterium bovis bacille Calmette–Guérin (BCG) vaccine are multifaceted and poorly understood. Objectives: We aimed to determine whether early-life exposure to PCBs (polychlorinated biphenyls) and DDE [1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene] reduces 6-month infant BCG vaccine response. Methods: Data came from families participating in a prospective birth cohort in eastern Slovakia. At birth, maternal and cord blood were collected for chemical analyses, and infants were immunized with BCG. Blood was collected from infants for chemical analyses and to determine 6-month BCG-specific immunoglobulin (Ig) G and IgA levels. Multivariable linear regression models were fit to examine chemical–BCG associations among approximately 500 mother–infant pairs, with adjustment for confounders. Results: The median 6-month infant concentration of the prevalent congener PCB-153 was 113 ng/g lipid [interquartile range (IQR): 37–248], and 388 ng/g lipid (IQR: 115–847) for DDE. Higher 6-month infant concentrations of PCB-153 and DDE were strongly associated with lower 6-month BCG-specific antibody levels. For instance, BCG-specific IgG levels were 37% lower for infants with PCB-153 concentrations at the 75th percentile compared to the 25th percentile (95% CI: –42, –32; p PCB–DDE additivity, where exposure to both compounds reduced anti-BCG levels more than exposure to either compound alone. Conclusions: The associations observed in this study indicate that environmental exposures may be overlooked contributors to poorer responses to BCG vaccine. The overall association between these exposures and tuberculosis incidence is unknown. Citation: Jusko TA, De Roos AJ, Lee SY, Thevenet-Morrison K, Schwartz SM, Verner MA, Palkovicova Murinova L, Drobná B, Kočan A, Fabišiková A, Čonka K, Trnovec T, Hertz-Picciotto I, Lawrence BP. 2016. A birth cohort study of maternal and infant

  6. Hepatic metabolism affects the atropselective disposition of 2,2',3,3',6,6'-hexachlorobiphenyl (PCB 136) in mice.

    Science.gov (United States)

    Wu, Xianai; Barnhart, Christopher; Lein, Pamela J; Lehmler, Hans-Joachim

    2015-01-06

    To understand the role of hepatic vs extrahepatic metabolism in the disposition of chiral PCBs, we studied the disposition of 2,2',3,3',6,6'-hexachlorobiphenyl (PCB 136) and its hydroxylated metabolites (HO-PCBs) in mice with defective hepatic metabolism due to the liver-specific deletion of cytochrome P450 oxidoreductase (KO mice). Female KO and congenic wild type (WT) mice were treated with racemic PCB 136, and levels and chiral signatures of PCB 136 and HO-PCBs were determined in tissues and excreta 3 days after PCB administration. PCB 136 tissue levels were higher in KO compared to WT mice. Feces was a major route of PCB metabolite excretion, with 2,2',3,3',6,6'-hexachlorobiphenyl-5-ol being the major metabolite recovered from feces. (+)-PCB 136, the second eluting PCB 136 atropisomers, was enriched in all tissues and excreta. The second eluting atropisomers of the HO-PCBs metabolites were enriched in blood and liver; 2,2',3,3',6,6'-hexachlorobiphenyl-5-ol in blood was an exception and displayed an enrichment of the first eluting atropisomers. Fecal HO-PCB levels and chiral signatures changed with time and differed between KO and WT mice, with larger HO-PCB enantiomeric fractions in WT compared to KO mice. Our results demonstrate that hepatic and, possibly, extrahepatic cytochrome P450 (P450) enzymes play a role in the disposition of PCBs.

  7. Green tea diet decreases PCB 126-induced oxidative stress in mice by upregulating antioxidant enzymes

    Science.gov (United States)

    Newsome, Bradley J; Petriello, Michael C; Han, Sung Gu; Murphy, Margaret O; Eske, Katryn E; Sunkara, Manjula; Morris, Andrew J; Hennig, Bernhard

    2013-01-01

    Superfund chemicals such as polychlorinated biphenyls pose a serious human health risk due to their environmental persistence and link to multiple diseases. Selective bioactive food components such as flavonoids have been shown to ameliorate PCB toxicity, but primarily in an in vitro setting. Here, we show that mice fed a green tea-enriched diet and subsequently exposed to environmentally relevant doses of coplanar PCB exhibit decreased overall oxidative stress primarily due to the upregulation of a battery of antioxidant enzymes. C57BL/6 mice were fed a low fat diet supplemented with green tea extract (GTE) for 12 weeks and exposed to 5 μmol PCB 126/kg mouse weight (1.63 mg/kg-day) on weeks 10, 11 and 12 (total body burden: 4.9 mg/kg). F2-Isoprostane and its metabolites, established markers of in vivo oxidative stress, measured in plasma via HPLC-MS/MS exhibited five-fold decreased levels in mice supplemented with GTE and subsequently exposed to PCB compared to animals on a control diet exposed to PCB. Livers were collected and harvested for both mRNA and protein analyses, and it was determined that many genes transcriptionally controlled by AhR and Nrf2 proteins were upregulated in PCB-exposed mice fed the green tea supplemented diet. An increased induction of genes such as SOD1, GSR, NQO1 and GST, key antioxidant enzymes, in these mice (green tea plus PCB) may explain the observed decrease in overall oxidative stress. A diet supplemented with green tea allows for an efficient antioxidant response in the presence of PCB 126 which supports the emerging paradigm that healthful nutrition may be able to bolster and buffer a physiological system against the toxicities of environmental pollutants. PMID:24378064

  8. Graphical programming interface: A development environment for MRI methods.

    Science.gov (United States)

    Zwart, Nicholas R; Pipe, James G

    2015-11-01

    To introduce a multiplatform, Python language-based, development environment called graphical programming interface for prototyping MRI techniques. The interface allows developers to interact with their scientific algorithm prototypes visually in an event-driven environment making tasks such as parameterization, algorithm testing, data manipulation, and visualization an integrated part of the work-flow. Algorithm developers extend the built-in functionality through simple code interfaces designed to facilitate rapid implementation. This article shows several examples of algorithms developed in graphical programming interface including the non-Cartesian MR reconstruction algorithms for PROPELLER and spiral as well as spin simulation and trajectory visualization of a FLORET example. The graphical programming interface framework is shown to be a versatile prototyping environment for developing numeric algorithms used in the latest MR techniques. © 2014 Wiley Periodicals, Inc.

  9. Overview of Evaluation Methods for R&D Programs. A Directory of Evaluation Methods Relevant to Technology Development Programs

    Energy Technology Data Exchange (ETDEWEB)

    Ruegg, Rosalie [TIA Consulting, Inc., Emeral Isle, NC (United States); Jordan, Gretchen B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2007-03-01

    This document provides guidance for evaluators who conduct impact assessments to determine the “realized” economic benefits and costs, energy, environmental benefits, and other impacts of the Office of Energy Efficiency and Renewable Energy’s (EERE) R&D programs. The focus of this Guide is on realized outcomes or impacts of R&D programs actually experienced by American citizens, industry, and others.

  10. Idaho National Laboratory PCB Annual Document Log and Annual Records Report for calendar year 2014

    Energy Technology Data Exchange (ETDEWEB)

    Layton, Deborah L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-06-01

    The requirements for the reporting of polychlorinated biphenyl (PCB)-related activities are found in 40 Code of Federal Regulations (CFR) 761 Subpart J, "General Records and Reports." The PCB Annual Document Log is a detailed record of the PCB waste handling activities at the facility. The facility must prepare it each year by July 1 and maintain it at the facility for at least 3 years after the facility ceases using or storing PCBs and PCB items. While submittal of the PCB Annual Document Log to the U.S. Environmental Protection Agency (EPA) is not required by regulation, EPA has verbally requested in telephone conversations that this report be submitted to them on an annual basis. The Annual Records are not required to be submitted to EPA and are not considered to be part of the Annual Document Log, but are included to provide the complete disposition history or status of all PCB activities during the year. The Annual Document Log section of this report (Section 2.0) meets the requirements of 40 CFR 761.180(a)(2), as applicable, while the Annual Records section (Section 3.0) meets the requirement of 40 CFR 761.180(a)(1).

  11. Association of plasma PCB levels and HbA1c concentration in Iran.

    Science.gov (United States)

    Eftekhari, Sahar; Aminian, Omid; Moinfar, Zeinab; Schettgen, Thomas; Kaifie, Andrea; Felten, Michael; Kraus, Thomas; Esser, André

    2018-01-01

    The rapid increase in prevalence of diabetes mellitus over the last decades warrants more attention to the effects of environmental and occupational exposures on glucose metabolism. Our study aimed to assess the association between the plasma levels of various congeners of polychlorinated biphenyls (PCBs) and the serum concentration of glycated haemoglobin (HbA1c). Our study population consisted of 140 Iranian adults from seven different occupational groups and a group of non-occupationally exposed female participants. The plasma concentration of PCBs were determined at the laboratory of occupational toxicology at RWTH Aachen University, Germany. We considered an HbA1c concentration of 5.7% and more as indicating a disturbed glucose metabolism. Logistic regression was used to assess the association between quartiles of concentrations of PCB congeners and serum HbA1c. Participants with an increased HbA1c value had higher plasma levels of PCB 138, 153, 180 and the PCB sum, although this association was statistically not significant. There was no significant difference between the levels of PCB 138, 153, 180, the sum of these congeners, and PCB 118 in their quartiles when comparing with HbA1c concentrations. For our cohort, we could not demonstrate a significant association between PCB and HbA1c concentrations indicating a disturbance of glucose metabolism.

  12. PCB concentrations and activity of sea lamprey Petromyzon marinus vary by sex

    Science.gov (United States)

    Madenjian, Charles P.; Johnson, Nicholas S.; Binder, Thomas R.; Rediske, Richard R.; O'Keefe, James P.

    2013-01-01

    We determined the polychlorinated biphenyl (PCB) concentrations of 40 male and 40 female adult sea lampreys Petromyzon marinus captured in the Cheboygan River, a tributary to Lake Huron, during May 2011. In addition, we performed a laboratory experiment using passive integrated transponder tags to determine whether male adult sea lampreys were more active than female adult sea lampreys. Sex had a significant effect on PCB concentration, and PCB concentration at a given level of sea lamprey condition was approximately 25 % greater in males than in females. Adjusting for the difference in condition between the sexes, males averaged a 17 % greater PCB concentration compared with females. Results from the laboratory experiment indicated that males were significantly more active than females. The observed sex difference in PCB concentrations was not due to female sea lampreys releasing eggs at spawning because the sea lamprey is semelparous, and we caught the sea lampreys before spawning. Rather, we attributed the sex difference in PCB concentrations to a greater rate of energy expenditure in males compared with females. We proposed that this greater rate of energy expenditure was likely due to greater activity. Our laboratory experiment results supported this hypothesis. A greater resting metabolic rate may also have contributed to a greater rate of energy expenditure. Our findings should eventually be applicable toward improving control of sea lamprey, a pest responsible for considerable damage to fisheries in lakes where it is not native.

  13. An introduction to meshfree methods and their programming

    CERN Document Server

    Liu, GR

    2005-01-01

    Friendly and straightforward presentation and beginner orientated Provides the fundamentals of numerical analysis that are particularly important to meshfree methods. Wide coverage of meshfree methods: EFG, RPIM, MLPG, LRPIM, MWS and collocation methods Detailed comparison case studies for many existing meshfree methods Well-tested computer source codes are attached with useful descriptions and readily test examples Soft copy of these source codes are available also at http://www.nus.edu.sg/ACES.

  14. Andragogical and Pedagogical Methods for Curriculum and Program Development

    Science.gov (United States)

    Wang, Victor C. X., Ed.; Bryan, Valerie C., Ed.

    2014-01-01

    Today's ever-changing learning environment is characterized by the fast pace of technology that drives our society to move forward, and causes our knowledge to increase at an exponential rate. The need for in-depth research that is bound to generate new knowledge about curriculum and program development is becoming ever more relevant.…

  15. Bioavailability of 2,3',4,4',5-pentachlorobiphenyl (PCB118) and 2,2',5,5'-tetrachlorobiphenyl (PCB52) from soils using a rat model and a physiologically based extraction test

    International Nuclear Information System (INIS)

    Pu Xinzhu; Lee, Linda S.; Galinsky, Raymond E.; Carlson, Gary P.

    2006-01-01

    The bioavailability of coplanar 2,3',4,4',5-pentachlorobiphenyl (PCB118) and nonplanar 2,2',5,5'-tetrachlorobiphenyl (PCB52) from soils representing a range in organic carbon (OC), clay content and pH were investigated using an in vivo rat model and an in vitro physiologically based extraction test (PBET) to assess the role of soil and chemical properties on bioavailabilty. Affinity to soil and persistence of PCBs have been shown to increase with increasing soil organic carbon (OC) content, PCB chlorination, and PCB coplanarity. In the in vivo tests for both PCB118 and PCB52, the AUCs following iv injection were significantly higher than the AUCs for all soil groups, indicating that the soil matrix can reduce the absolute bioavailability of PCB118 and PCB52. However, no significant differences were detected between soils of different properties. In the in vitro PBET, significant differences in the mobilization of PCB118 and PCB52 were observed among soils, and PCBs had the least mobilization from the soil with the highest OC content consistent with hydrophobic partitioning theory. Also, significantly less PCB118 was mobilized relative to PCB52 in the PBET assay, showing the potential impact of spatial orientation and chlorine content on bioavailability. No correlation between the in vitro PBET and the in vivo rat model was observed for the PCBs. Although the in vitro PBET and related assays may serve as an indicator of bioavailability, it is likely to underestimate what can be released from a soil in an in vivo assay

  16. An intergenerational program for persons with dementia using Montessori methods.

    Science.gov (United States)

    Camp, C J; Judge, K S; Bye, C A; Fox, K M; Bowden, J; Bell, M; Valencic, K; Mattern, J M

    1997-10-01

    An intergenerational program bringing together older adults with dementia and preschool children in one-on-one interactions is described. Montessori activities, which have strong ties to physical and occupational therapy, as well as to theories of developmental and cognitive psychology, are used as the context for these interactions. Our experience indicates that older adults with dementia can still serve as effective mentors and teachers to children in an appropriately structured setting.

  17. The QUELCE Method: Using Change Drivers to Estimate Program Costs

    Science.gov (United States)

    2016-08-01

    Analysis 4 2.4 Assign Conditional Probabilities 5 2.5 Apply Uncertainty to Cost Formula Inputs for Scenarios 5 2.6 Perform Monte Carlo Simulation to...Distribution Statement A: Approved for Public Release; Distribution is Unlimited 1 Introduction: The Cost Estimation Challenge Because large-scale programs... challenged [Bliss 2012]. Improvements in cost estimation that would make these assumptions more precise and reduce early lifecycle uncertainty can

  18. Reliability Tests of Aluminium Wedge Wire Bonding on Auto-catalytic Silver Immersion Gold (ASIG) PCB Metallization

    CERN Document Server

    Drozd, A; Kaufmann, S; Manolescu, F; McGill, I

    2011-01-01

    The Auto-catalytic Silver Immersion Gold (ASIG) PCB metallization is a new process that has clear advantages for PCB assembly especially with regard to lead-free soldering. As it may become a popular process in the future for electronics used in physics experiments, the quality of this metallization for aluminium wire bonding has been studied. Aluminium wedge wire bonding continues to be the interconnection method of choice for many physics detector sensors, for high density signal routing and for unpackaged die. Although advertised as having good quality for aluminium wire bonding, this study was performed to verify this claim as well as to test the longer term reliability of the wire bonds taking into consideration the environmental conditions and life-expectancy of devices, in particular for high energy physics detector applications. The tests were performed on PCBs made with the ASIG and ENIG (Electro-less Nickel Immersion Gold) processes at the same time in order to make a comparison with the current ind...

  19. Adsorption of DDT and PCB by Nanomaterials from Residual Soil

    Science.gov (United States)

    Taha, Mohd Raihan; Mobasser, Shariat

    2015-01-01

    This paper presents the findings of a study on adsorption of dichlorodiphenythreechloroethen (DDT) and polychlorinated biphenyls (PCBs) on three nanomaterials including Multi walled Carbon Nanotube (MWNT), nano-clay and nano-alumina. DDT and PCBs are of significant concern due their high toxicity and long environmental half-lives. Experiments were conducted using batch adsorption procedures at different DDT and PCBs concentrations, from 10 to 60 mg/L. The amounts of MWNT, nano-clay and Nano-alumina used were 0.25%, 0.50%, 0.75%, 1%, 2% and 10%. The adsorption of PCBs solution onto the MWNT, nano-clay and nano-alumina was characterized by an initial rapid adsorption which eventually became constant within 22, 20, and 17 hours, respectively. The adsorption of DDT solution onto the MWNT, nano-clay and nano-alumina was also characterized by an initial rapid adsorption which gradually became constant within 22, 22 and 16 hours, respectively. Results of this study indicated that MWNT was a better adsorbent material compared to nano-clay and nano-alumina for both contaminants in this study. While at 10% of MWNT 88.9% and 77% of DDT and PCB were removed by MWNT, respectively. The effect of pH and temperature were also investigated. PMID:26659225

  20. 78 FR 45253 - National Toxicology Program Scientific Advisory Committee on Alternative Toxicological Methods...

    Science.gov (United States)

    2013-07-26

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Toxicology Program... Alternative Methods (ICCVAM), the National Toxicology Program (NTP) Interagency Center for the Evaluation of... Director, National Toxicology Program. [FR Doc. 2013-17919 Filed 7-25-13; 8:45 am] BILLING CODE 4140-01-P ...

  1. Integrating Program Assessment and a Career Focus into a Research Methods Course

    Science.gov (United States)

    Senter, Mary Scheuer

    2017-01-01

    Sociology research methods students in 2013 and 2016 implemented a series of "real world" data gathering activities that enhanced their learning while assisting the department with ongoing program assessment and program review. In addition to the explicit collection of program assessment data on both students' development of sociological…

  2. Long-term effects of environmentally relevant doses of 2,2',4,4',5,5' hexachlorobiphenyl (PCB153 on neurobehavioural development, health and spontaneous behaviour in maternally exposed mice

    Directory of Open Access Journals (Sweden)

    Heegaard Einar

    2011-01-01

    Full Text Available Abstract Background Polychlorinated biphenyls (PCBs are widespread in the environment, human food and breast milk. Seafood is known to contain nutrients beneficial for the normal development and function of the brain, but also contaminants such as PCBs which are neurotoxic. Exposure to non-coplanar PCBs during brain development can disrupt spontaneous behaviour in mice and lead to hyperactive behaviour. Humans are chronically exposed to the highest relative levels of organochlorines in early childhood during brain development, though usually at doses which do not give clinical symptoms of toxicity. This study aimed to elucidate the developmental and behavioural effects of 2,2',4,4',5,5' hexachlorobiphenyl (PCB153 in mice, mimicking human exposure during gestation and lactation. Methods Environmentally relevant doses of PCB153 were added to the experimental diets. Feed concentrations were approximately 0.5, 6.5, and 1500 μg PCB153/kg feed, representing a realistic and a worst case scenario of frequent consumption of contaminated fish. The study also investigated the effects of maternal nutrition, i.e. a standard rodent diet versus a high inclusion of salmon. Mice pups were examined for physical- and reflex development, sensorimotor function and spontaneous behaviour from five days after birth until weaning. A selection of pups were followed until 16 weeks of age and tested for open field behaviour and the acoustic startle response (ASR with prepulse inhibition (PPI. Blood thyroid hormones and liver enzymes, blood lipids and PCB153 content in fat were examined at 16 weeks. Statistical analyses modelled the three way interactions of diet, PCB exposure and litter size on behaviour, using generalized linear models (GLM and linear mixed effect models (LME. The litter was used as a random variable. Non-parametric tests were used for pair wise comparisons of biochemical analyses. Results Litter size consistently influenced pup development and behaviour

  3. Application of a Bimetallic Treatment System (BTS) for PCB Removal from Older Structures on DoD Facilities

    Science.gov (United States)

    2010-11-05

    Umbilical Tower at KSC. Additionally, main engine test stands at Marshall Space Flight Center (MSFC) were tested for PCB removal and destruction using...test stands at Marshall Space Flight Center (MSFC) were tested for PCB removal and destruction using BTS. The original BTS formulation developed...as on an island , or in the arctic. All the scenarios evaluated in the costs model have assumed the treatment of PCB -containing materials down to

  4. Individual Polychlorinated Biphenyl (PCB) Congeners Produce Tissue- and Gene-Specific Effects on Thyroid Hormone Signaling during Development

    Science.gov (United States)

    Giera, Stefanie; Bansal, Ruby; Ortiz-Toro, Theresa M.; Taub, Daniel G.

    2011-01-01

    Polychlorinated biphenyls (PCB) are industrial chemicals linked to developmental deficits that may be caused in part by disrupting thyroid hormone (TH) action by either reducing serum TH or interacting directly with the TH receptor (TR). Individual PCB congeners can activate the TR in vitro when the metabolic enzyme cytochrome P4501A1 (CYP1A1) is induced, suggesting that specific PCB metabolites act as TR agonists. To test this hypothesis in vivo, we compared two combinations of PCB congeners that either activate the TR (PCB 105 and 118) or not (PCB 138 and 153) in the presence or absence of a PCB congener (PCB 126) that induces CYP1A1 in vitro. Aroclor 1254 was used as a positive control, and a group treated with propylthiouracil was included to characterize the effects of low serum TH. We monitored the effects on TH signaling in several peripheral tissues by measuring the mRNA expression of well-known TH-response genes in these tissues. Aroclor 1254 and its component PCB 105/118/126 reduced total T4 to the same extent as that of propylthiouracil but increased the expression of some TH target genes in liver. This effect was strongly correlated with CYP1A1 expression supporting the hypothesis that metabolism is necessary. Effects were gene and tissue specific, indicating that tissue-specific metabolism is an important component of PCB disruption of TH action and that PCB metabolites interact in complex ways with the TR. These are essential mechanisms to consider when evaluating the health risks of contaminant exposures, for both PCB and other polycyclic compounds known to interact with nuclear hormone receptors. PMID:21540284

  5. MoDOT pavement preservation research program volume IV, pavement evaluation tools-data collection methods.

    Science.gov (United States)

    2015-10-01

    The overarching goal of the MoDOT Pavement Preservation Research Program, Task 3: Pavement Evaluation Tools Data : Collection Methods was to identify and evaluate methods to rapidly obtain network-level and project-level information relevant to :...

  6. Method and program for complex calculation of heterogeneous reactor

    International Nuclear Information System (INIS)

    Kalashnikov, A.G.; Glebov, A.P.; Elovskaya, L.F.; Kuznetsova, L.I.

    1988-01-01

    An algorithm and the GITA program for complex one-dimensional calculation of a heterogeneous reactor which permits to conduct calculations for the reactor and its cell simultaneously using the same algorithm are described. Multigroup macrocross sections for reactor zones in the thermal energy range are determined according to the technique for calculating a cell with complicate structure and then the continuous multi group calculation of the reactor in the thermal energy range and in the range of neutron thermalization is made. The kinetic equation is solved using the Pi- and DSn- approximations [fr

  7. Dioxin-like (PCB 126) and non dioxin-like (PCB 153) action on DNA damage and apoptosis in granulosa cells. Preliminary data

    Energy Technology Data Exchange (ETDEWEB)

    Gregoraszczuk, E.L.; Wojtowicz, A. [Lab. of Physiology and Toxicology of Reproduction, Inst. of Zoology, Jagiellonian Univ., Krakow (Poland); Kapiszewska, M.; Magnowska, Z. [Dept. of General Biochemistry, Jagiellonian Univ., Krakow (Poland)

    2004-09-15

    Introduction Approximately 60-90% of all cancer cases are now generally believed to be due to environmental factors, to which humans are exposed by taking food, and water or inhaling air. These chemicals, including polycyclic aromatic hydrocarbons (PAHs), can be subdivided into different classes. TCDD was classified as group (documented carcinogen in humans) Benzo [a] pyrene and benzo [a] anthracene were included into group 2A (probably carcinogen in humans). PCB is not mentioned in this list. The International Agency for Research on Cancer (IARC) maintains a register of human carcinogens and suspected human carcinogens. The capacity of PCBs to induce DNA strand breaks has been studied to a lesser degree and is quite controversial. DNA strand breaks are the potentially mutagenic lesions that have been proposed as a genotoxicity biomarker for the biomonitoring of environmental pollutants. The mutations induced by these lesions in pollutant-exposed populations are believed to be induced by chemical carcinogens. The formation of PCB adducts has been demonstrated and measured in vitro and in vivo 3. The capacity of PCBs to form DNA adducts depends on their metabolic rate, which is determined by the degree of chlorination. The aim of the presented preliminary data was to evaluate the follicular stage-specific action of PCB 126 and PCB 153 on DNA damage and apoptosis in granulosa cells.

  8. Improved stove programs need robust methods to estimate carbon offsets

    OpenAIRE

    Johnson, Michael; Edwards, Rufus; Masera, Omar

    2010-01-01

    Current standard methods result in significant discrepancies in carbon offset accounting compared to approaches based on representative community based subsamples, which provide more realistic assessments at reasonable cost. Perhaps more critically, neither of the currently approved methods incorporates uncertainties inherent in estimates of emission factors or non-renewable fuel usage (fNRB). Since emission factors and fNRB contribute 25% and 47%, respectively, to the overall uncertainty in ...

  9. Developmental PCB Exposure Increases Audiogenic Seizures and Decreases Glutamic Acid Decarboxylase in the Inferior Colliculus.

    Science.gov (United States)

    Bandara, Suren B; Eubig, Paul A; Sadowski, Renee N; Schantz, Susan L

    2016-02-01

    Previously, we observed that developmental polychlorinated biphenyl (PCB) exposure resulted in an increase in audiogenic seizures (AGSs) in rats. However, the rats were exposed to loud noise in adulthood, and were not tested for AGS until after 1 year of age, either of which could have interacted with early PCB exposure to increase AGS susceptibility. This study assessed susceptibility to AGS in young adult rats following developmental PCB exposure alone (without loud noise exposure) and investigated whether there was a decrease in GABA inhibitory neurotransmission in the inferior colliculus (IC) that could potentially explain this effect. Female Long-Evans rats were dosed orally with 0 or 6 mg/kg/day of an environmentally relevant PCB mixture from 28 days prior to breeding until the pups were weaned at postnatal day 21. One male-female pair from each litter was retained for the AGS study whilst another was retained for Western blot analysis of glutamic acid decarboxylase (GAD) and GABAAα1 receptor in the IC, the site in the auditory midbrain where AGS are initiated. There was a significant increase in the number and severity of AGSs in the PCB groups, with females somewhat more affected than males. GAD65 was decreased but there was no change in GAD67 or GABAAα1 in the IC indicating decreased inhibitory regulation in the PCB group. These results confirm that developmental PCB exposure alone is sufficient to increase susceptibility to AGS, and provide the first evidence for a possible mechanism of action at the level of the IC. © The Author 2015. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  10. Intestinal exposure to PCB 153 induces inflammation via the ATM/NEMO pathway.

    Science.gov (United States)

    Phillips, Matthew C; Dheer, Rishu; Santaolalla, Rebeca; Davies, Julie M; Burgueño, Juan; Lang, Jessica K; Toborek, Michal; Abreu, Maria T

    2018-01-15

    Polychlorinated biphenyls (PCBs) are persistent organic pollutants that adversely affect human health. PCBs bio-accumulate in organisms important for human consumption. PCBs accumulation in the body leads to activation of the transcription factor NF-κB, a major driver of inflammation. Despite dietary exposure being one of the main routes of exposure to PCBs, the gut has been widely ignored when studying the effects of PCBs. We investigated the effects of PCB 153 on the intestine and addressed whether PCB 153 affected intestinal permeability or inflammation and the mechanism by which this occurred. Mice were orally exposed to PCB 153 and gut permeability was assessed. Intestinal epithelial cells (IECs) were collected and evaluated for evidence of genotoxicity and inflammation. A human IEC line (SW480) was used to examine the direct effects of PCB 153 on epithelial function. NF-кB activation was measured using a reporter assay, DNA damage was assessed, and cytokine expression was ascertained with real-time PCR. Mice orally exposed to PCB 153 had an increase in intestinal permeability and inflammatory cytokine expression in their IECs; inhibition of NF-кB ameliorated both these effects. This inflammation was associated with genotoxic damage and NF-кB activation. Exposure of SW480 cells to PCB 153 led to similar effects as seen in vivo. We found that activation of the ATM/NEMO pathway by genotoxic stress was upstream of NF-kB activation. These results demonstrate that oral exposure to PCB 153 is genotoxic to IECs and induces downstream inflammation and barrier dysfunction in the intestinal epithelium. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. Chemical and microbiological characterization of an aged PCB-contaminated soil.

    Science.gov (United States)

    Stella, T; Covino, S; Burianová, E; Filipová, A; Křesinová, Z; Voříšková, J; Větrovský, T; Baldrian, P; Cajthaml, T

    2015-11-15

    This study was aimed at complex characterization of three soil samples (bulk soil, topsoil and rhizosphere soil) from a site historically contaminated with polychlorinated biphenyls (PCB). The bulk soil was the most highly contaminated, with a PCB concentration of 705.95 mg kg(-1), while the rhizosphere soil was the least contaminated (169.36 mg kg(-1)). PCB degradation intermediates, namely chlorobenzoic acids (CBAs), were detected in all the soil samples, suggesting the occurrence of microbial transformation processes over time. The higher content of organic carbon in the topsoil and rhizosphere soil than in the bulk soil could be linked to the reduced bioaccessibility (bioavailability) of these chlorinated pollutants. However, different proportions of the PCB congener contents and different bioaccessibility of the PCB homologues indicate microbial biotransformation of the compounds. The higher content of organic carbon probably also promoted the growth of microorganisms, as revealed by phospholipid fatty acid (PFLA) quantification. Tag-encoded pyrosequencing analysis showed that the bacterial community structure was significantly similar among the three soils and was predominated by Proteobacteria (44-48%) in all cases. Moreover, analysis at lower taxonomic levels pointed to the presence of genera (Sphingomonas, Bulkholderia, Arthrobacter, Bacillus) including members with reported PCB removal abilities. The fungal community was mostly represented by Basidiomycota and Ascomycota, which accounted for >80% of all the sequences detected in the three soils. Fungal taxa with biodegradation potential (Paxillus, Cryptococcus, Phoma, Mortierella) were also found. These results highlight the potential of the indigenous consortia present at the site as a starting point for PCB bioremediation processes. Copyright © 2015 Elsevier B.V. All rights reserved.

  12. Contrasting PCB bioaccumulation patterns among Lake Huron lake trout reflect basin-specific ecology.

    Science.gov (United States)

    Paterson, Gordon; Ryder, Mark; Drouillard, Ken G; Haffner, G Douglas

    2016-01-01

    This study collected multiple age classes of lake trout from Lake Huron's Main Basin, Georgian Bay, and North Channel regions to compare and contrast top predator polychlorinated biphenyl (PCB) bioaccumulation patterns in separate compartments of the same ecosystem. Sum PCB concentrations were highest for Main Basin (260 ± 24.9 ng g(-1) wet wt) fish, followed by Georgian Bay (74.6 ± 16.2 ng g(-1) ) and North Channel (42.0 ± 3.3 ng g(-1)) fish. Discriminant functions analysis of lake trout PCB profiles and stable carbon (δ(13)C) and nitrogen (δ(15)N) isotope values clearly distinguished fish by location, indicating high degrees of basin fidelity throughout their lifetimes in addition to highly contrasting PCB bioaccumulation profiles. These unique profiles were not attributable to significant differences in lake trout lipid contents (p = 0.856) or trophic position (δ(15)N; p = 0.334), with rainbow smelt representing the primary prey across the basins. Furthermore, significant differences were observed among the basins for the relationships between PCB biomagnification factors and hydrophobicity. An empirical model for predicting PCB biomagnification in Lake Huron lake trout indicated that basin-specific population growth rates and prey abundances were significant for explaining these contrasting patterns of PCB bioaccumulation. The results of the present study are fundamental for understanding the role of ecology in legacy persistent organic pollutant (POP) bioaccumulation. Specifically, ecosystem characteristics such as prey abundances, foraging ecology, and ultimately consumer growth can regulate the variability of legacy POP bioaccumulation as observed within and among a wide range of freshwater ecosystems. © 2015 SETAC.

  13. Treatability of PCB-contaminated soils with quicklime (CaO)

    International Nuclear Information System (INIS)

    Mauro, D.; Taylor, B.B.

    1992-12-01

    The possibility that quicklime (calcium oxide, CaO) can destroy PCBs has received much attention over the past year. Observations at an EPA remediation site, where lime-containing kiln dusts were used for interim stabilization of PCB-containing wastes prompted the EPA to sponsor a small research project to investigate quicklime-PCB interactions. That study reported decreases in PCB content in synthetic, PCB-spiked soil following the application of quicklime and heat. META Environmental, Inc., as a contractor to EPRI, recently completed research designed to evaluate the effectiveness of quicklime for treating PCBs in soil and sand matrices under several reaction conditions, and to examine the underlying dechlorination chemistry involved, if any. Experiments were run with PCB-spiked sand and with actual PCB-contaminated soil. A variety of experimental conditions were employed including tests in open and closed containers, at ambient and elevated temperatures, and over a range of one hour to four days. Granular quicklime, fly ash, and kiln dust were all tested for reaction with PCBs. Early experiments showed that a mixture of sand/quicklime/water at 1:3:1.5 by weight, placed in an insulated container reached a maximum temperature of 216 degree C. Treatability experiments were subsequently run under controlled heat at room temperature, at 80 degree C, and at 200 degree C (following the initial temperature increase which occurs when water is added to quicklime). Little or no loss of PCBs was observed in open or closed containers at ambient or at 800 degree C over any period of time studied. A significant decrease of PCBs levels was observed only in the high temperature experiments (above 200 degree C), however the fate of the PCBs in those experiments was not determined. The conditions and the results of the PCB treatment tests are presented in this report, as well as recommendations for further studies

  14. Effect of seafood mediated PCB exposure on desaturase activity and PUFA profile in Faroese septuagenarians.

    Science.gov (United States)

    Tøttenborg, Sandra Søgaard; Choi, Anna L; Bjerve, Kristian S; Weihe, Pal; Grandjean, Philippe

    2015-07-01

    Polychlorinated biphenyl (PCB) exposure may affect serum concentrations of polyunsaturated fatty acids (PUFAs) by inhibiting desaturases ∆5 and ∆6 that drive their synthesis from precursor fatty acids. Such changes in the composition of fatty acids may affect cardiovascular disease risk, which is thought to increase at elevated PCB exposures. This population-based cross-sectional study examined 712 Faroese men and women aged 70-74 years. The serum phospholipid fraction of fasting blood samples was used to determine the PUFA profile, including linoleic acid, dihomo-γ-linolenic acid, arachidonic acid, eicosatrienoic acid, and other relevant fatty acids. Ratios between precursor and metabolite fatty acids were used as proxies for ∆5 and ∆6 desaturase activity. Tertiles of serum-PCB concentrations were used in multiple regression analyses to determine the association between the exposure and desaturase activity. In multiple regression models, PCB exposure was inversely related to the estimated Δ6 desaturase activity resulting in accumulation of precursor fatty acids and decrease in the corresponding product PUFAs. A positive association between PCB and Δ5 desaturation was also found. A relative increase in EA was also observed, though only in the third tertile of PCB exposure. Non-linear relationships between the exposure and the desaturase activity were not found. Consuming fish and seafood may not be translated into beneficial fatty acid profiles if the diet simultaneously causes exposure to PCBs. Although the desaturase estimates were likely influenced by dietary intakes of product PUFAs, the association between PCB exposure and ∆6 desaturase activity is plausible and may affect cardiovascular disease risk. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. Electroremediation of PCB contaminated soil combined with iron nanoparticles: Effect of the soil type.

    Science.gov (United States)

    Gomes, Helena I; Dias-Ferreira, Celia; Ottosen, Lisbeth M; Ribeiro, Alexandra B

    2015-07-01

    Polychlorinated biphenyls (PCB) are carcinogenic and persistent organic pollutants that accumulate in soils and sediments. Currently, there is no cost-effective and sustainable remediation technology for these contaminants. In this work, a new combination of electrodialytic remediation and zero valent iron particles in a two-compartment cell is tested and compared to a more conventional combination of electrokinetic remediation and nZVI in a three-compartment cell. In the new two-compartment cell, the soil is suspended and stirred simultaneously with the addition of zero valent iron nanoparticles. Remediation experiments are made with two different historically PCB contaminated soils, which differ in both soil composition and contamination source. Soil 1 is a mix of soils with spills of transformer oils, while Soil 2 is a superficial soil from a decommissioned school where PCB were used as windows sealants. Saponin, a natural surfactant, was also tested to increase the PCB desorption from soils and enhance dechlorination. Remediation of Soil 1 (with highest pH, carbonate content, organic matter and PCB concentrations) obtained the maximum 83% and 60% PCB removal with the two-compartment and the three-compartment cell, respectively. The highest removal with Soil 2 were 58% and 45%, in the two-compartment and the three-compartment cell, respectively, in the experiments without direct current. The pH of the soil suspension in the two-compartment treatment appears to be a determining factor for the PCB dechlorination, and this cell allowed a uniform distribution of the nanoparticles in the soil, while there was iron accumulation in the injection reservoir in the three-compartment cell. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Chronic treatment with polychlorinated biphenyls (PCB) during pregnancy and lactation in the rat

    International Nuclear Information System (INIS)

    Cocchi, Daniela; Tulipano, Giovanni; Colciago, Alessandra; Sibilia, Valeria; Pagani, Francesca; Vigano, Daniela; Rubino, Tiziana; Parolaro, Daniela; Bonfanti, Patrizia; Colombo, Anita; Celotti, Fabio

    2009-01-01

    Polychlorinated biphenyls (PCBs) are pollutants detected in animal tissues and breast milk. The experiments described in the present paper were aimed at evaluating whether the four PCB congeners most abundant in animal tissues (PCB-138, -153, -180 and -126), administered since fetal life till weaning, can induce long-term alterations of GH-axis activity and bone mass in the adult rat. We measured PCB accumulation in rat brain and liver, somatic growth, pituitary GH expression and plasma hormone concentrations at different ages. Finally, we studied hypothalamic somatostatin expression and bone structure in adulthood, following long-term PCB exposure. Dams were treated during pregnancy from GD15 to GD19 and during breast-feeding. A constant reduction of the growth rate in both male and female offspring from weaning to adulthood was observed in exposed animals. Long-lasting alterations on hypothalamic-pituitary GH axis were indeed observed in PCB-exposed rats in adulthood: increased somatostatin expression in hypothalamic periventricular nucleus (both males and females) and lateral arcuate nucleus (males, only) and decreased GH mRNA levels in the pituitary of male rats. Plasma IGF-1 levels were higher in PCB-exposed male and female animals as compared with controls at weaning and tended to be higher at PN60. Plasma testosterone and thyroid hormone concentrations were not significantly affected by exposure to PCBs. In adulthood, PCBs caused a significant reduction of bone mineral content and cortical bone thickness of tibiae in male rat joint to increased width of the epiphyseal cartilage disk. In conclusion, the developmental exposure to the four selected PCB compounds used in the present study induced far-reaching effects in the adult offspring, the male rats appearing more sensitive than females.

  17. Fundamental solution of the problem of linear programming and method of its determination

    Science.gov (United States)

    Petrunin, S. V.

    1978-01-01

    The idea of a fundamental solution to a problem in linear programming is introduced. A method of determining the fundamental solution and of applying this method to the solution of a problem in linear programming is proposed. Numerical examples are cited.

  18. NERL MICROBIAL PROGRAM WITH EMPHASIS ON PROTOZOAN METHODS

    Science.gov (United States)

    The National Exposure Research Laboratory's facility in Cincinnati is engated in a variety of microbiological research projects that include studies on bacteria, viruses, fungi and protozoa. One of these was a protzoology project to determine the best way to evaluate methods rep...

  19. Teaching methods and surgical training in North American graduate periodontics programs: exploring the landscape.

    Science.gov (United States)

    Ghiabi, Edmond; Taylor, K Lynn

    2010-06-01

    This project aimed at documenting the surgical training curricula offered by North American graduate periodontics programs. A survey consisting of questions on teaching methods employed and the content of the surgical training program was mailed to directors of all fifty-eight graduate periodontics programs in Canada and the United States. The chi-square test was used to assess whether the residents' clinical experience was significantly (Pperiodontal plastic procedures, hard tissue grafts, and implants. Furthermore, residents in programs offering a structured preclinical component performed significantly more procedures (P=0.012) using lasers than those in programs not offering a structured preclinical program. Devising new and innovative teaching methods is a clear avenue for future development in North American graduate periodontics programs.

  20. Use of quality management methods in the transition from efficacious prevention programs to effective prevention services.

    Science.gov (United States)

    Daniels, Vicki-Smith; Sandler, Irwin; Wolchik, Sharlene

    2008-06-01

    This paper applies concepts and methods developed in management to translate efficacious prevention programs into effective prevention services. The paper describes Quality Function Deployment (QFD) as a method for structured planning and development that connects the needs and wants of the consumer with the design of the product or service. The paper describes basic tools used in quality management, and discusses how they might be applied to prepare a prevention program for implementation by community agencies. Prevention programs are conceptualized as having multiple consumers (i.e., stakeholders), including the participants who receive the service, the service providers, the organizations that deliver the program, and the researchers who evaluate the programs. As an illustration of one step in the application of QFD to translate efficacious prevention programs into effective prevention services, analysis of the needs and preferences of Family Courts for the implementation of an the New Beginnings Program is presented.

  1. PCB 126 toxicity is modulated by cross-talk between caveolae and Nrf2 signaling

    Energy Technology Data Exchange (ETDEWEB)

    Petriello, Michael C. [Graduate Center for Toxicology, College of Medicine, University of Kentucky, Lexington, KY 40536 (United States); University of Kentucky Superfund Research Center, Lexington, KY 40536 (United States); Han, Sung Gu [University of Kentucky Superfund Research Center, Lexington, KY 40536 (United States); Department of Food Science and Biotechnology of Animal Resources, College of Animal Bioscience and Technology, Konkuk University, Seoul 143-701 (Korea, Republic of); Newsome, Bradley J. [University of Kentucky Superfund Research Center, Lexington, KY 40536 (United States); Department of Chemistry, College of Arts and Sciences, University of Kentucky, Lexington, KY 40506 (United States); Hennig, Bernhard [Graduate Center for Toxicology, College of Medicine, University of Kentucky, Lexington, KY 40536 (United States); University of Kentucky Superfund Research Center, Lexington, KY 40536 (United States); Department of Animal and Food Sciences, College of Agriculture, Food and Environment, University of Kentucky, KY 40506 (United States)

    2014-06-01

    Environmental toxicants such as polychlorinated biphenyls (PCBs) have been implicated in the promotion of multiple inflammatory disorders including cardiovascular disease, but information regarding mechanisms of toxicity and cross-talk between relevant cell signaling pathways is lacking. To examine the hypothesis that cross-talk between membrane domains called caveolae and nuclear factor (erythroid-derived 2)-like 2 (Nrf2) pathways alters PCB-induced inflammation, caveolin-1 was silenced in vascular endothelial cells, resulting in a decreased PCB-induced inflammatory response. Cav-1 silencing (siRNA treatment) also increased levels of Nrf2-ARE transcriptional binding, resulting in higher mRNA levels of the antioxidant genes glutathione s-transferase and NADPH dehydrogenase quinone-1 in both vehicle and PCB-treated systems. Along with this upregulated antioxidant response, Cav-1 siRNA treated cells exhibited decreased mRNA levels of the Nrf2 inhibitory protein Keap1 in both vehicle and PCB-treated samples. Silencing Cav-1 also decreased protein levels of Nrf2 inhibitory proteins Keap1 and Fyn kinase, especially in PCB-treated cells. Further, endothelial cells from wildtype and Cav-1 −/− mice were isolated and treated with PCB to better elucidate the role of functional caveolae in PCB-induced endothelial inflammation. Cav-1 −/− endothelial cells were protected from PCB-induced cellular dysfunction as evidenced by decreased vascular cell adhesion molecule (VCAM-1) protein induction. Compared to wildtype cells, Cav-1 −/− endothelial cells also allowed for a more effective antioxidant response, as observed by higher levels of the antioxidant genes. These data demonstrate novel cross-talk mechanisms between Cav-1 and Nrf2 and implicate the reduction of Cav-1 as a protective mechanism for PCB-induced cellular dysfunction and inflammation. - Highlights: • Reduction of caveolin-1 protein protects against polychlorinated biphenyl toxicity. • Decreasing

  2. Associations between plasma concentrations of PCB 28 and possible indoor exposure sources in Danish school children and mothers.

    Science.gov (United States)

    Egsmose, Emilie Lund; Bräuner, Elvira Vaclavik; Frederiksen, Marie; Mørck, Thit Aarøe; Siersma, Volkert Dirk; Hansen, Pernille Winton; Nielsen, Flemming; Grandjean, Philippe; Knudsen, Lisbeth E

    2016-02-01

    Polychlorinated biphenyls (PCBs) are ubiquitously present in the environment and are suspected of carcinogenic, neurotoxic and immunotoxic effects. Significantly higher plasma concentrations of the congener PCB 28 occur in children compared to adults. Exposure in schools may contribute to this difference. To determine whether increased blood plasma concentrations of PCB 28 in Danish school children and mothers are associated with living in homes or attending schools constructed in the PCB period (1959-1977). PCB 28 was analyzed in plasma samples from 116 children aged 6-11years and 143 mothers living in an urban and a rural area in Denmark and participating in the European pilot project DEMOCOPHES (Demonstration of a study to COordinate and Perform Human Biomonitoring on a European Scale). In Denmark, PCBs were used in construction in the period 1950-1977, and year of construction or renovation of the homes and schools was used as a proxy for indoor PCB exposure. Linear regression models were used to assess the association between potential PCB exposure from building materials and lipid adjusted concentrations of PCB 28 in plasma, with and without adjustment for potential confounders. Among the 116 children and 143 mothers, we were able to specify home construction period in all but 4 children and 5 mothers leaving 111 children and 138 mothers for our analyses. The median lipid adjusted plasma PCB 28 concentration was 3 (range: 1-28) ng/g lipid in the children and 2 (range: 1-8) ng/g lipid in the mothers. Children living in homes built in the PCB period had significantly higher lipid adjusted plasma PCB 28 concentrations compared to children living in homes built before or after the PCB period. Following adjustment for covariates, PCB 28 concentrations in children were 40 (95% CI: 13; 68) percent higher than concentrations of children living in homes constructed at other times. Furthermore, children attending schools built or substantially refurbished in the PCB

  3. Waste Isolation Pilot Plant Initial Report for PCB Disposal Authorization (40 CFR (section) 761.75[c])

    International Nuclear Information System (INIS)

    Westinghouse TRU Solutions

    2002-01-01

    This initial report is being submitted pursuant to Title 40 Code of Federal Regulations (CFR) (section) 761.75(c) to request authorization to allow the disposal of transuranic (TRU) wastes containing polychlorinated biphenyls (PCBs) which are duly regulated under the Toxic Substances Control Act (TSCA). Approval of this initial report will not affect the disposal of TRU or TRU mixed wastes that do not contain PCBs. This initial report also demonstrates how the Waste Isolation Pilot Plant (WIPP) meets or exceeds the technical standards for a Chemical Waste Landfill. Approval of this request will allow the U.S. Department of Energy (DOE) to dispose of approximately 88,000 cubic feet (ft3) (2,500 cubic meters [m3]) of TRU wastes containing PCBs subject to regulation under the TSCA. This approval will include only those PCB/TRU wastes, which the TSCA regulations allow for disposal of the PCB component in municipal solid waste facilities or chemical waste landfills (e.g., PCB remediation waste, PC B articles, and bulk PCB product waste). Disposal of TRU waste by the DOE is congressionally mandated in Public Law 102-579 (as amended by the National Defense Authorization Act for Fiscal Year 1997, Pub. L. 104-201, referred to as the WIPP Land Withdrawal Act [LWA]). Portions of the TRU waste inventory contain hazardous waste constituents regulated under 40 CFR Parts 260 through 279, and/or PCBs and PCB Items regulated under 40 CFR Part 761. Therefore, the DOE TRU waste program must address the disposal requirements for these hazardous waste constituents and PCBs. To facilitate the disposal of TRU wastes containing hazardous waste constituents, the owner/operators received a Hazardous Waste Facility Permit (HWFP) from the New Mexico Environment Department (NMED) on October 27, 1999. The permit allows the disposal of TRU wastes subject to hazardous waste disposal requirements (TRU mixed waste). Informational copies of this permit and other referenced documents are available

  4. Early weaning PCB 95 exposure alters the neonatal endocrine system: thyroid adipokine dysfunction.

    Science.gov (United States)

    Ahmed, R G

    2013-12-01

    Polychlorinated biphenyls (PCBs) are persistent environmental pollutants that can severely disrupt the endocrine system. In the present study, early-weaned male rats were administered a single dose of 2,3,6-2',5'-pentachlorinated biphenyl (PCB 95; 32 mg/kg per day, by i.p. injection) for two consecutive days (postnatal days (PNDs) 15 and 16) and killed 24 and 48 h after the administration of the last dose. Compared with the control group, administration of PCB 95 induced a reduction (Pcolloidal contents at PND 18. The dyshormonogenesis and thyroid dysgenesis may be attributed to the elevation of DNA fragmentation at PNDs 17 and 18. Furthermore, this hypothyroid state revealed higher (Pinsulin at both PNDs compared with the control group. Interestingly, the body weight of the neonates in the PCB 95 group exhibited severe decreases throughout the experimental period in relation to that of the control group. These results imply that PCB 95 may act as a disruptor of the developmental hypothalamic-pituitary-thyroid axis. Hypothyroidism caused by PCB 95 may impair the adipokine axis, fat metabolism, and in general postnatal development. Thus, further studies need to be carried out to understand this concept.

  5. Low consumption single-use microvalve for microfluidic PCB-based platforms

    International Nuclear Information System (INIS)

    Flores, G; Aracil, C; Perdigones, F; Quero, J M

    2014-01-01

    In this paper, a single-use and unidirectional microvalve with low consumption of energy for PCB-based microfluidic platforms is reported. Its activation is easy because it works as a fuse. The fabrication process of the device is based on PCB technology and a typical SU-8 process, using the PCB as a substrate and SU-8 for the microfluidic channels and chambers. The microvalve is intended to be used to impulse small volumes of fluids and it has been designed to be highly integrable in PCB-based microfluidic platforms. The proposed device has been fabricated, integrated and tested in a general purpose microfluidic circuit, resulting in a low activation time, of about 100 μs, and a low consumption of energy, with a maximum of 27 mJ. These results show a significant improvement because the energy consumption is about 84% lower and the time response is about four orders of magnitude shorter if compared with similar microvalves for impulsion of fluids on PCB-based platforms. (paper)

  6. PCB and PAH release from power stations and waste incineration processes in the UK

    Energy Technology Data Exchange (ETDEWEB)

    Dyke, Patrick H. [PD Consulting, Magdalen, Brobury, HR3 6DX (United Kingdom); Foan, Colin [The Environment Agency, National Centre for Risk Analysis and Options Appraisal, Kings Meadow House, Kings Meadow Road, Reading, (United Kingdom); Fiedler, Heidelore [United Nations Environment Programme (UNEP) Chemicals, 11-13, chemin des Anemones, CH-1219, Chatelaine (Switzerland)

    2003-01-01

    This study focused on emissions of polychlorinated biphenyls (PCB) and polycyclic aromatic hydrocarbons (PAH) from incineration and power generation processes. Increased concern over human exposure to both classes of compounds has meant that environmental regulators need to assess the contribution made by emissions from regulated processes to human exposure. In the first part of an assessment in the UK we reviewed literature data on emissions of PCB, focusing on the dioxin-like PCB assigned toxic equivalency factors by the World Health Organization, and PAH. The literature study was supplemented by a series of plant tests to gather initial real plant data. Literature data were limited and the lack of standard protocols for measurement and reporting of both PCB and PAH meant that few data sets were comparable. Levels of dioxin-like PCB reported in the literature and measured in UK plant tests showed that well-controlled modern combustion plants with comprehensive pollution controls gave low emissions, typically about 5-10% of the toxic equivalent of the emissions of polychlorinated dibenzodioxins and dibenzofurans at the same plants and below the widely used standard of 0.1 ng TEQ/N m{sup 3}. (Author)

  7. Comparison of Statistical Methods for Detector Testing Programs

    Energy Technology Data Exchange (ETDEWEB)

    Rennie, John Alan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Abhold, Mark [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-10-14

    A typical goal for any detector testing program is to ascertain not only the performance of the detector systems under test, but also the confidence that systems accepted using that testing program’s acceptance criteria will exceed a minimum acceptable performance (which is usually expressed as the minimum acceptable success probability, p). A similar problem often arises in statistics, where we would like to ascertain the fraction, p, of a population of items that possess a property that may take one of two possible values. Typically, the problem is approached by drawing a fixed sample of size n, with the number of items out of n that possess the desired property, x, being termed successes. The sample mean gives an estimate of the population mean p ≈ x/n, although usually it is desirable to accompany such an estimate with a statement concerning the range within which p may fall and the confidence associated with that range. Procedures for establishing such ranges and confidence limits are described in detail by Clopper, Brown, and Agresti for two-sided symmetric confidence intervals.

  8. Thermal performance of a PCB embedded pulsating heat pipe for power electronics applications

    International Nuclear Information System (INIS)

    Kearney, Daniel J.; Suleman, Omar; Griffin, Justin; Mavrakis, Georgios

    2016-01-01

    Highlights: • Planar, compact PCB embedded pulsating heat pipe for heat spreading applications. • Embedded heat pipe operates at sub-ambient pressure with environmentally. • Compatible fluids. • Range of optimum operating conditions, orientations and fill ratios identified. - Abstract: Low voltage power electronics applications (<1.2 kV) are pushing the design envelope towards increased functionality, better reliability, low profile and reduced cost. One packaging method to enable these constraints is the integration of active power electronic devices into the printed circuit board improving electrical and thermal performance. This development requires a reliable passive thermal management solution to mitigate hot spots due to the increased heat flux density. To this end, a 44 channel open looped pulsating heat pipe (OL-PHP) is experimentally investigated for two independent dielectric working fluids – Novec"T"M 649 and Novec"T"M 774 – due to their lower pressure operation and low global warming potential compared to traditional two-phase coolants. The OL-PHP is investigated in vertical (90°) orientation with fill ratios ranging from 0.30 to 0.70. The results highlight the steady state operating conditions for each working fluid with instantaneous plots of pressure, temperature, and thermal resistance; the minimum potential bulk thermal resistance for each fill ratio and the effective thermal conductivity achievable for the OL-PHP.

  9. ADVANCING THE STUDY OF VIOLENCE AGAINST WOMEN USING MIXED METHODS: INTEGRATING QUALITATIVE METHODS INTO A QUANTITATIVE RESEARCH PROGRAM

    Science.gov (United States)

    Testa, Maria; Livingston, Jennifer A.; VanZile-Tamsen, Carol

    2011-01-01

    A mixed methods approach, combining quantitative with qualitative data methods and analysis, offers a promising means of advancing the study of violence. Integrating semi-structured interviews and qualitative analysis into a quantitative program of research on women’s sexual victimization has resulted in valuable scientific insight and generation of novel hypotheses for testing. This mixed methods approach is described and recommendations for integrating qualitative data into quantitative research are provided. PMID:21307032

  10. Method Improving Reading Comprehension In Primary Education Program Students

    Science.gov (United States)

    Rohana

    2018-01-01

    This study aims to determine the influence of reading comprehension skills of English for PGSD students through the application of SQ3R learning method. The type of this research is Pre-Experimental research because it is not yet a real experiment, there are external variables that influence the formation of a dependent variable, this is because there is no control variable and the sample is not chosen randomly. The research design is used is one-group pretest-post-test design involving one group that is an experimental group. In this design, the observation is done twice before and after the experiment. Observations made before the experiment (O1) are called pretests and the post-experimental observation (O2) is called posttest. The difference between O1 and O2 ie O2 - O1 is the effect of the treatment. The results showed that there was an improvement in reading comprehension skills of PGSD students in Class M.4.3 using SQ3R method, and better SQ3R enabling SQ3R to improve English comprehension skills.

  11. Integrating design science theory and methods to improve the development and evaluation of health communication programs.

    Science.gov (United States)

    Neuhauser, Linda; Kreps, Gary L

    2014-12-01

    Traditional communication theory and research methods provide valuable guidance about designing and evaluating health communication programs. However, efforts to use health communication programs to educate, motivate, and support people to adopt healthy behaviors often fail to meet the desired goals. One reason for this failure is that health promotion issues are complex, changeable, and highly related to the specific needs and contexts of the intended audiences. It is a daunting challenge to effectively influence health behaviors, particularly culturally learned and reinforced behaviors concerning lifestyle factors related to diet, exercise, and substance (such as alcohol and tobacco) use. Too often, program development and evaluation are not adequately linked to provide rapid feedback to health communication program developers so that important revisions can be made to design the most relevant and personally motivating health communication programs for specific audiences. Design science theory and methods commonly used in engineering, computer science, and other fields can address such program and evaluation weaknesses. Design science researchers study human-created programs using tightly connected build-and-evaluate loops in which they use intensive participatory methods to understand problems and develop solutions concurrently and throughout the duration of the program. Such thinking and strategies are especially relevant to address complex health communication issues. In this article, the authors explore the history, scientific foundation, methods, and applications of design science and its potential to enhance health communication programs and their evaluation.

  12. PRODUCTION PROGRAM OPTIMIZATION – RESPONSIBLE MANAGEMENT METHOD OF LOGGING

    Directory of Open Access Journals (Sweden)

    Severian Vlăduț IACOB

    2014-06-01

    Full Text Available Aggression of any kind on the environment and especially uncontrolled exploitation of forests has generated mixed reaction among the public and politicians, but especially in the academic sphere where actually were fired early warning signs of the effects of these actions. Reduction of Earth's forested areas was discussed by specialists as continuous and highly accelerated, especially in the last century when reserve "green gold" of mankind has halved. As a result, the conservation of forests and prevention of environmental degradation have become great concerns of each nation, but the need for global action required the transformation into strategic objectives of regional and international bodies. They have designed policies and measures generally available and have created favorable framework implementation in the Member States and beyond. One of the projects that came to life and expanded worldwide was the sustainable development today, basically there are no area where the activity is not subrogated to achieve a balance between the components of economic, social and environmental. From this perspective forestry and forestry exploitation is the place where really have achieved sustainability. Achieving this requirement becomes an obligation, both for woodland owners and operators seeking to obtain profit from logging. Compliance and ensuring responsible management are certainly prerequisites of sustainability in this sector. Scientific planning of production is a method of management responsible. This study takes into account, on the one hand, highlighting the effects generated by uncontrolled deforestation and the importance of sustainable forest exploitation, and on the other hand, presenting the need to use scientific methods to practice responsible management.

  13. An introduction to fuzzy linear programming problems theory, methods and applications

    CERN Document Server

    Kaur, Jagdeep

    2016-01-01

    The book presents a snapshot of the state of the art in the field of fully fuzzy linear programming. The main focus is on showing current methods for finding the fuzzy optimal solution of fully fuzzy linear programming problems in which all the parameters and decision variables are represented by non-negative fuzzy numbers. It presents new methods developed by the authors, as well as existing methods developed by others, and their application to real-world problems, including fuzzy transportation problems. Moreover, it compares the outcomes of the different methods and discusses their advantages/disadvantages. As the first work to collect at one place the most important methods for solving fuzzy linear programming problems, the book represents a useful reference guide for students and researchers, providing them with the necessary theoretical and practical knowledge to deal with linear programming problems under uncertainty.

  14. Acute alteration of cardiac ECG, action potential, I{sub Kr} and the human ether-a-go-go-related gene (hERG) K{sup +} channel by PCB 126 and PCB 77

    Energy Technology Data Exchange (ETDEWEB)

    Park, Mi-Hyeong; Park, Won Sun; Jo, Su-Hyun, E-mail: suhyunjo@kangwon.ac.kr

    2012-07-01

    Polychlorinated biphenyls (PCBs) have been known as serious persistent organic pollutants (POPs), causing developmental delays and motor dysfunction. We have investigated the effects of two PCB congeners, 3,3′,4,4′-tetrachlorobiphenyl (PCB 77) and 3,3′,4,4′,5-pentachlorobiphenyl (PCB 126) on ECG, action potential, and the rapidly activating delayed rectifier K{sup +} current (I{sub Kr}) of guinea pigs' hearts, and hERG K{sup +} current expressed in Xenopus oocytes. PCB 126 shortened the corrected QT interval (QTc) of ECG and decreased the action potential duration at 90% (APD{sub 90}), and 50% of repolarization (APD{sub 50}) (P < 0.05) without changing the action potential duration at 20% (APD{sub 20}). PCB 77 decreased APD{sub 20} (P < 0.05) without affecting QTc, APD{sub 90}, and APD{sub 50}. The PCB 126 increased the I{sub Kr} in guinea-pig ventricular myocytes held at 36 °C and hERG K{sup +} current amplitude at the end of the voltage steps in voltage-dependent mode (P < 0.05); however, PCB 77 did not change the hERG K{sup +} current amplitude. The PCB 77 increased the diastolic Ca{sup 2+} and decreased Ca{sup 2+} transient amplitude (P < 0.05), however PCB 126 did not change. The results suggest that PCB 126 shortened the QTc and decreased the APD{sub 90} possibly by increasing I{sub Kr}, while PCB 77 decreased the APD{sub 20} possibly by other modulation related with intracellular Ca{sup 2+}. The present data indicate that the environmental toxicants, PCBs, can acutely affect cardiac electrophysiology including ECG, action potential, intracellular Ca{sup 2+}, and channel activity, resulting in toxic effects on the cardiac function in view of the possible accumulation of the PCBs in human body. -- Highlights: ► PCBs are known as serious environmental pollutants and developmental disruptors. ► PCB 126 shortened QT interval of ECG and action potential duration. ► PCB 126 increased human ether-a-go-go-related K{sup +} current and I{sub Kr}.

  15. Final report for Tank 100 Sump sludge (KON332) for polychlorinated biphenyl's (PCB)

    International Nuclear Information System (INIS)

    Fuller, R.K.

    1998-01-01

    Final Report for Tank 100 Sump Sludge (KON332) for Polychlorinated Biphenyl's (PCB) Sample Receipt Sample KON332 was received from Tank 100-Sump (WESF) on May 18, 1998. The laboratory number issued for this sample is S98BOO0207 as shown on the Request for Sample Analysis (RSA) form (Attachment 4). The sample breakdown diagram (Attachment 3) provides a cross-reference of customer sample identification to the laboratory identification number. Attachment 4 provides copies of the Request for Sample Analysis (RSA) and Chain of Custody (COC) forms. The sample was received in the laboratory in a 125-ml polybottle. Breakdown and subsampling was performed on June 6, 1998. PCB analysis was performed on the wet sludge. A discussion of the results is presented in Attachment 2. The 222-S extraction bench sheets are presented in Attachment 5. The PCB raw data are presented in Attachment 6

  16. Alberta opens its borders to PCB waste from other provinces for destruction

    International Nuclear Information System (INIS)

    Hurst, R.

    1995-01-01

    The most recent and most significant development in the management of PCBs in Canada occurred with the announcement of the Alberta government that it would open its provincial borders to PCB and other hazardous wastes from across Canada for incineration at the province's special waste treatment facility located at Swan Hills, Alberta. The facility has an annual capacity of 15,000 tonnes of PCB waste. Alberta 's own waste products will be treated first; any excess capacity will be utilized to treat waste materials received from other provinces. It is estimated that given the Swan Hills plant capacity, it will take several years to treat and destroy all of Canada's current PCB waste inventory. Regulations concerning transportation, contracting requirements and pricing policies were briefly reviewed

  17. Simultaneous electrodialytic removal of PAH, PCB, TBT and heavy metals from sediments

    DEFF Research Database (Denmark)

    Pedersen, Kristine B.; Lejon, Tore; Jensen, Pernille Erland

    2017-01-01

    with the need of different remedial actions for each pollutant. In this study, electrodialytic remediation (EDR) of sediments was found effective for simultaneous removal of heavy metals and organic pollutants for sediments from Arctic regions - Sisimiut in Greenland and Hammerfest in Norway. The influence...... was found to be important for the removal of heavy metals and TBT, while photolysis was significant for removal of PAH, PCB and TBT. In addition, dechlorination was found to be important for the removal of PCB. The highest removal efficiencies were found for heavy metals, TBT and PCB (>40%) and lower......Contaminated sediments are remediated in order to protect human health and the environment, with the additional benefit of using the treated sediments for other activities. Common for many polluted sediments is the contamination with several different pollutants, making remediation challenging...

  18. Measurement of PCB emissions from building surfaces using a novel portable emission test cell

    DEFF Research Database (Denmark)

    Lyng, Nadja; Gunnarsen, Lars Bo; Andersen, Helle Vibeke

    2016-01-01

    Polychlorinated biphenyls (PCBs) were used in building materials like caulks and paints from 1930 e1970s and in some cases that caused elevated PCB concentrations in the indoor air at levels considered harmful to occupant health. PCBs are semivolatile organic compounds and capable of spreading from...... and there is a need to prioritise remediation measures on different materials. An inexpensive and portable emission test cell was developed to resemble indoor conditions in relation to the area specific ventilation rate. Emissions were measured using the test cell in the laboratory on freshly made PCB paint. Further......, the chamber was used for determining emissions from PCB-containing building materials in the field as well as remediated walls. The measurements showed that sorption of PCBs to chamber walls was insignificant after 2-4 days of exposure to the source. Over a period of two weeks emission rates did not change...

  19. Reliability of lead-free solder joints with different PCB surface finishes under thermal cycling

    Energy Technology Data Exchange (ETDEWEB)

    Xia Yanghua [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China)], E-mail: xia_yanghua@hotmail.com; Xie Xiaoming [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China)

    2008-04-24

    The reliability of lead-free electronic assemblies under thermal cycling was investigated. Thin small outline package (TSOP) devices with FeNi leads were reflow soldered on FR4 PCB (printed circuit board) with Sn3.0Ag0.5Cu (wt%) solder. The effects of different PCB finishes (organic solderability preservative (OSP) and electroless nickel immersion gold (ENIG)) were studied. The results show that OSP finish reveals better performance than its ENIG counterparts. The crack originates at the fringe of heel fillet in both cases. The propagation of crack in the ENIG case is along the device/solder interface, while in the case of OSP, the crack extends parallel to the solder/PCB interface. When the OSP finishes are employed, many Cu6Sn5 precipitates form inside the bulk solder and have a strengthening effect on the solder joint, resulting in better reliability performance as compared to those with ENIG finishes.

  20. Methods for evaluating a mature substance abuse prevention/early intervention program.

    Science.gov (United States)

    Becker, L R; Hall, M; Fisher, D A; Miller, T R

    2000-05-01

    The authors describe methods for work in progress to evaluate four workplace prevention and/or early intervention programs designed to change occupational norms and reduce substance abuse at a major U.S. transportation company. The four programs are an employee assistance program, random drug testing, managed behavioral health care, and a peer-led intervention program. An elaborate mixed-methods evaluation combines data collection and analysis techniques from several traditions. A process-improvement evaluation focuses on the peer-led component to describe its evolution, document the implementation process for those interested in replicating it, and provide information for program improvement. An outcome-assessment evaluation examines impacts of the four programs on job performance measures (e.g., absenteeism, turnover, injury, and disability rates) and includes a cost-offset and employer cost-savings analysis. Issues related to using archival data, combining qualitative and quantitative designs, and working in a corporate environment are discussed.

  1. Estimating Time-Varying PCB Exposures Using Person-Specific Predictions to Supplement Measured Values: A Comparison of Observed and Predicted Values in Two Cohorts of Norwegian Women

    Science.gov (United States)

    Nøst, Therese Haugdahl; Breivik, Knut; Wania, Frank; Rylander, Charlotta; Odland, Jon Øyvind; Sandanger, Torkjel Manning

    2015-01-01

    Background Studies on the health effects of polychlorinated biphenyls (PCBs) call for an understanding of past and present human exposure. Time-resolved mechanistic models may supplement information on concentrations in individuals obtained from measurements and/or statistical approaches if they can be shown to reproduce empirical data. Objectives Here, we evaluated the capability of one such mechanistic model to reproduce measured PCB concentrations in individual Norwegian women. We also assessed individual life-course concentrations. Methods Concentrations of four PCB congeners in pregnant (n = 310, sampled in 2007–2009) and postmenopausal (n = 244, 2005) women were compared with person-specific predictions obtained using CoZMoMAN, an emission-based environmental fate and human food-chain bioaccumulation model. Person-specific predictions were also made using statistical regression models including dietary and lifestyle variables and concentrations. Results CoZMoMAN accurately reproduced medians and ranges of measured concentrations in the two study groups. Furthermore, rank correlations between measurements and predictions from both CoZMoMAN and regression analyses were strong (Spearman’s r > 0.67). Precision in quartile assignments from predictions was strong overall as evaluated by weighted Cohen’s kappa (> 0.6). Simulations indicated large inter-individual differences in concentrations experienced in the past. Conclusions The mechanistic model reproduced all measurements of PCB concentrations within a factor of 10, and subject ranking and quartile assignments were overall largely consistent, although they were weak within each study group. Contamination histories for individuals predicted by CoZMoMAN revealed variation between study subjects, particularly in the timing of peak concentrations. Mechanistic models can provide individual PCB exposure metrics that could serve as valuable supplements to measurements. Citation Nøst TH, Breivik K, Wania F

  2. Interior Point Method for Solving Fuzzy Number Linear Programming Problems Using Linear Ranking Function

    Directory of Open Access Journals (Sweden)

    Yi-hua Zhong

    2013-01-01

    Full Text Available Recently, various methods have been developed for solving linear programming problems with fuzzy number, such as simplex method and dual simplex method. But their computational complexities are exponential, which is not satisfactory for solving large-scale fuzzy linear programming problems, especially in the engineering field. A new method which can solve large-scale fuzzy number linear programming problems is presented in this paper, which is named a revised interior point method. Its idea is similar to that of interior point method used for solving linear programming problems in crisp environment before, but its feasible direction and step size are chosen by using trapezoidal fuzzy numbers, linear ranking function, fuzzy vector, and their operations, and its end condition is involved in linear ranking function. Their correctness and rationality are proved. Moreover, choice of the initial interior point and some factors influencing the results of this method are also discussed and analyzed. The result of algorithm analysis and example study that shows proper safety factor parameter, accuracy parameter, and initial interior point of this method may reduce iterations and they can be selected easily according to the actual needs. Finally, the method proposed in this paper is an alternative method for solving fuzzy number linear programming problems.

  3. Fasting augments PCB impact on liver metabolism in anadromous Arctic Char

    Science.gov (United States)

    Vijayan, M.M.; Aluru, N.; Maule, A.G.; Jorgensen, E.H.

    2006-01-01

    Anadromous arctic char (Salvelinus alpinus) undertake short feeding migrations to seawater every summer and accumulate lipids, while the rest of the year is spent in fresh water where the accumulated lipid reserves are mobilized. We tested the hypothesis that winter fasting and the associated polychlorinated biphenyls' (PCBs) redistribution from lipid depots to critical tissues impair the liver metabolic capacity in these animals. Char were administered Aroclor 1254 (0, 1, 10, and 100 mg/ kg body mass) orally and maintained for 4 months without feeding to mimic seasonal winter fasting, while fed groups (0 and 100 mg Aroclor 1254/kg) were maintained for comparison. A clear dose-related increase in PCB accumulation and cytochrome P4501A (CYP1A) protein content was observed in the livers of fasted fish. This PCB concentration and CYP1A response with the high dose of Aroclor were 1.5-fold and 3-fold greater in the fasted than in the fed fish, respectively. In fed fish, PCB exposure lowered liver glycogen content, whereas none of the other metabolic indicators were significantly affected. In fasted fish, PCB exposure depressed liver glycogen content and activities of glucose-6-phosphate dehydrogenase, alanine aminotransferase, lactate dehydrogenase, and phosphoenolpyruvate carboxykinase and elevated 3-hydroxyacylcoA dehydrogenase activity and glucocorticoid receptor protein expression. There were no significant impacts of PCB on heat shock protein 70 (hsp70) and hsp90 contents in either fed or fasted fish. Collectively, our study demonstrates that winter emaciation associated with the anadromous lifestyle predisposes arctic char to PCB impact on hepatic metabolism including disruption of the adaptive metabolic responses to extended fasting. ?? 2006 Oxford University Press.

  4. A dynamic and mechanistic model of PCB bioaccumulation in the European hake ( Merluccius merluccius)

    Science.gov (United States)

    Bodiguel, Xavier; Maury, Olivier; Mellon-Duval, Capucine; Roupsard, François; Le Guellec, Anne-Marie; Loizeau, Véronique

    2009-08-01

    Bioaccumulation is difficult to document because responses differ among chemical compounds, with environmental conditions, and physiological processes characteristic of each species. We use a mechanistic model, based on the Dynamic Energy Budget (DEB) theory, to take into account this complexity and study factors impacting accumulation of organic pollutants in fish through ontogeny. The bioaccumulation model proposed is a comprehensive approach that relates evolution of hake PCB contamination to physiological information about the fish, such as diet, metabolism, reserve and reproduction status. The species studied is the European hake ( Merluccius merluccius, L. 1758). The model is applied to study the total concentration and the lipid normalised concentration of 4 PCB congeners in male and female hakes from the Gulf of Lions (NW Mediterranean sea) and the Bay of Biscay (NE Atlantic ocean). Outputs of the model compare consistently to measurements over the life span of fish. Simulation results clearly demonstrate the relative effects of food contamination, growth and reproduction on the PCB bioaccumulation in hake. The same species living in different habitats and exposed to different PCB prey concentrations exhibit marked difference in the body accumulation of PCBs. At the adult stage, female hakes have a lower PCB concentration compared to males for a given length. We successfully simulated these sex-specific PCB concentrations by considering two mechanisms: a higher energy allocation to growth for females and a transfer of PCBs from the female to its eggs when allocating lipids from reserve to eggs. Finally, by its mechanistic description of physiological processes, the model is relevant for other species and sets the stage for a mechanistic understanding of toxicity and ecological effects of organic contaminants in marine organisms.

  5. 21 CFR 500.45 - Use of polychlorinated biphenyls (PCB's) in the production, handling, and storage of animal feed.

    Science.gov (United States)

    2010-04-01

    ... a class of toxic industrial chemicals manufactured and sold under a variety of trade names... highly stable, heat resistant, and nonflammable chemicals. Industrial uses of PCB's include, or did... and chemical properties and widespread, uncontrolled industrial applications have caused PCB's to be a...

  6. EFFECTS OF AMMONIUM PERCHLORATE ON LIVER ENZYMES AND THE THYROID AXIS OF RATS PRETREATED WITH PCB126.

    Science.gov (United States)

    Ammonium perchlorate and 3,3,4,4,5-pentachlorobiphenyl (PCB126) are environmental contaminants that are known to disturb thyroid hormone (TH) homeostasis by well defined modes of action that lead to hypothyroidism in the rat. PCB126 increases phase II conjugation of T4 by induc...

  7. Using Program Package NSPCG to Analyze the Trunk Reservation Service Protection Method

    DEFF Research Database (Denmark)

    Barker, Vincent A.; Nielsen, Bo Friis

    1994-01-01

    , by purely numerical methods, a set of balance equations, Ax = 0, often of very high order. Since the coefficient matrix is typically sparse, it is natural to apply iterative methods to this task. Many such methods have been incorporated in program package NSPCG, developed at the Center for Numerical...

  8. The effect of ventilation on the indoor air concentration of PCB

    DEFF Research Database (Denmark)

    Lyng, Nadja; Gunnarsen, Lars Bo; Andersen, Helle Vibeke

    2015-01-01

    The impact of increased ventilation on polychlorinated biphenyl (PCB) air concentration by installation of mechanical balanced ventilation units was studied. The intervention was carried out in three PCB-contaminated rooms; one classroom in an elementary school and two small bedrooms...... in an apartment in a residential building. In the classroom, the air exchange rate (ACH) was raised from 0.2 (without mechanical ventilation) to 5.5 /h during the intervention. In the two bedrooms, the highest ACH was 6.6 /h and 0.5 /h without mechanical ventilation. The corresponding concentration decrease...

  9. Assessing PCB pollution in the Baltic Sea - An equilibrium partitioning based study

    DEFF Research Database (Denmark)

    Lang, Susann-Cathrin; Mayer, Philipp; Hursthouse, Andrew

    2018-01-01

    Sediment cores and bottom water samples from across the Baltic Sea region were analyzed for freely dissolved concentrations (Cfree), total sediment concentrations (CT) and the dissolved aqueous fraction in water of seven indicator PCBs. Ex-situ equilibrium sampling of sediment samples was conducted...... with polydimethylsiloxane (PDMS) coated glass fibers that were analyzed by automated thermal desorption GC-MS, which yielded PCB concentrations in the fiber coating (CPDMS). Measurements of CPDMS and CT were then applied to determine (i) spatially resolved freely dissolved PCB concentrations; (ii) baseline toxicity...

  10. Estimation of dietary intake of PCB and organochlorine pesticides for children and adults

    DEFF Research Database (Denmark)

    Fromberg, Arvid; Granby, Kit; Højgård, A.

    2011-01-01

    Levels of organochlorine substances, including a number of organochlorine pesticides and PCB, are monitored in food, including meat, fish and dairy products. The substances are slowly degradable and therefore persist for long periods in the environment, where they accumulate in the fatty tissues...... pesticides and 0.9 μg/day for the indicator PCB-sum. People with a relatively high intake of these substances (the 95th percentile) are estimated to consume approximately twice as much. In general, the highest contributions to the intake of the organochlorine environmental contaminants are from fish, meat...

  11. Inhibition of aromatase activity by methyl sulfonyl PCB metabolites in primary culture of human mammary fibroblasts

    Energy Technology Data Exchange (ETDEWEB)

    Berg, M. van den; Heneweer, M.; Geest, M. de; Sanderson, T. [Inst. for Risk Assessment Sciences and Utrecht Univ. (Netherlands); Jong, P. de [St. Antonius Hospital, Nieuwegein (Netherlands); Bergman, A. [Stockholm Univ., Stockholm (Sweden)

    2004-09-15

    Methyl sulfonyl PCB metabolites (MeSO2-PCBs) are persistent contaminants and are ubiquitously present in humans and the environment. Lipophilicity of MeSO2- PCB metabolites is similar to the parent compounds and they have been detected in human milk, adipose, liver and lung tissue. 4- MeSO2-PCB-149 is the most abundant PCB metabolite in human adipose tissue and milk at a level of 1.5 ng/g lipids. Human blood concentration of 4-MeSO2-PCB-149 is approximately 0.03 nM. 3- MeSO2-PCB-101 is the predominant PCB metabolite in muscle and blubber in wildlife, such as otter, mink and grey seal. In the environment, they have been linked to chronic and reproductive toxicity in exposed mink. Additionaly, some MeSO{sub 2}-PCBs have been shown to be glucocorticoid receptor (GR) antagonists. Since approximately 60% of all breast tumors are estrogen responsive, exposure to compounds that are able to alter estrogen synthesis through interference with the aromatase enzyme, can lead to changes in estrogen levels and possibly to accelerated or inhibit breast tumor growth. Therefore, it is important to identify exogenous compounds that can alter aromatase activity in addition to those compounds which have direct interaction with the estrogen receptor (ER). Aromatase (CYP19) comprises the ubiquitous flavoprotein, NADPH-cytochrome P450 reductase, and a unique cytochrome P450 that is exclusively expressed in estrogen producing cells. Previous studies have revealed that expression of the aromatase gene is regulated in a species- and tissue specific manner. In healthy breast tissue, the predominantly active aromatase promoter region I.4 is regulated by glucocorticoids and class I cytokines. Therefore, it is important to investigate possible aromatase inhibiting properties of MeSO{sub 2}-PCBs (as anti glucocorticoids?) in relevant human tissues. We used primary human mammary fibroblasts because of their role in breast cancer development. We compared the results in primary fibroblasts with

  12. Female Juvenile Delinquents' Reactions to a Reading Program: A Mixed Methods Study

    Science.gov (United States)

    Sanger, Dixie; Ritzman, Mitzi; Schaefer, Lauren; Belau, Don

    2010-01-01

    Older students who struggle with reading are more motivated to participate in instructional intervention if they are interested in the program. This mixed methods study examined opinions and reactions of 41 female juvenile delinquents on a 1-hour demonstration of the START-IN (STudents Are Responding To INtervention) reading program. Following a…

  13. An Alternating Direction Method for Convex Quadratic Second-Order Cone Programming with Bounded Constraints

    Directory of Open Access Journals (Sweden)

    Xuewen Mu

    2015-01-01

    quadratic programming over second-order cones and a bounded set. At each iteration, we only need to compute the metric projection onto the second-order cones and the projection onto the bound set. The result of convergence is given. Numerical results demonstrate that our method is efficient for the convex quadratic second-order cone programming problems with bounded constraints.

  14. A Comparison of Traditional Worksheet and Linear Programming Methods for Teaching Manure Application Planning.

    Science.gov (United States)

    Schmitt, M. A.; And Others

    1994-01-01

    Compares traditional manure application planning techniques calculated to meet agronomic nutrient needs on a field-by-field basis with plans developed using computer-assisted linear programming optimization methods. Linear programming provided the most economical and environmentally sound manure application strategy. (Contains 15 references.) (MDH)

  15. 34 CFR 429.1 - What is the Bilingual Vocational Materials, Methods, and Techniques Program?

    Science.gov (United States)

    2010-07-01

    ... techniques for bilingual vocational training for individuals with limited English proficiency. (Authority..., and Techniques Program? 429.1 Section 429.1 Education Regulations of the Offices of the Department of... MATERIALS, METHODS, AND TECHNIQUES PROGRAM General § 429.1 What is the Bilingual Vocational Materials...

  16. Computer programs of information processing of nuclear physical methods as a demonstration material in studying nuclear physics and numerical methods

    Science.gov (United States)

    Bateev, A. B.; Filippov, V. P.

    2017-01-01

    The principle possibility of using computer program Univem MS for Mössbauer spectra fitting as a demonstration material at studying such disciplines as atomic and nuclear physics and numerical methods by students is shown in the article. This program is associated with nuclear-physical parameters such as isomer (or chemical) shift of nuclear energy level, interaction of nuclear quadrupole moment with electric field and of magnetic moment with surrounded magnetic field. The basic processing algorithm in such programs is the Least Square Method. The deviation of values of experimental points on spectra from the value of theoretical dependence is defined on concrete examples. This value is characterized in numerical methods as mean square deviation. The shape of theoretical lines in the program is defined by Gaussian and Lorentzian distributions. The visualization of the studied material on atomic and nuclear physics can be improved by similar programs of the Mössbauer spectroscopy, X-ray Fluorescence Analyzer or X-ray diffraction analysis.

  17. A program-compiling method of nuclear data on-line fast analysis

    International Nuclear Information System (INIS)

    Li Shangbai

    1990-01-01

    This paper discusses how to perform assembly float point operation by using some subroutine of applesoft system, and a program compiling method of nuclear data fast analysis in apple microcomputer is introduced

  18. On the complexity of a combined homotopy interior method for convex programming

    Science.gov (United States)

    Yu, Bo; Xu, Qing; Feng, Guochen

    2007-03-01

    In [G.C. Feng, Z.H. Lin, B. Yu, Existence of an interior pathway to a Karush-Kuhn-Tucker point of a nonconvex programming problem, Nonlinear Anal. 32 (1998) 761-768; G.C. Feng, B. Yu, Combined homotopy interior point method for nonlinear programming problems, in: H. Fujita, M. Yamaguti (Eds.), Advances in Numerical Mathematics, Proceedings of the Second Japan-China Seminar on Numerical Mathematics, Lecture Notes in Numerical and Applied Analysis, vol. 14, Kinokuniya, Tokyo, 1995, pp. 9-16; Z.H. Lin, B. Yu, G.C. Feng, A combined homotopy interior point method for convex programming problem, Appl. Math. Comput. 84 (1997) 193-211.], a combined homotopy was constructed for solving non-convex programming and convex programming with weaker conditions, without assuming the logarithmic barrier function to be strictly convex and the solution set to be bounded. It was proven that a smooth interior path from an interior point of the feasible set to a K-K-T point of the problem exists. This shows that combined homotopy interior point methods can solve the problem that commonly used interior point methods cannot solveE However, so far, there is no result on its complexity, even for linear programming. The main difficulty is that the objective function is not monotonically decreasing on the combined homotopy path. In this paper, by taking a piecewise technique, under commonly used conditions, polynomiality of a combined homotopy interior point method is given for convex nonlinear programming.

  19. The Value of Developing a Mixed-Methods Program of Research.

    Science.gov (United States)

    Simonovich, Shannon

    2017-07-01

    This article contributes to the discussion of the value of utilizing mixed methodological approaches to conduct nursing research. To this end, the author of this article proposes creating a mixed-methods program of research over time, where both quantitative and qualitative data are collected and analyzed simultaneously, rather than focusing efforts on designing singular mixed-methods studies. A mixed-methods program of research would allow for the best of both worlds: precision through focus on one method at a time, and the benefits of creating a robust understanding of a phenomenon over the trajectory of one's career through examination from various methodological approaches.

  20. Usage of I++ Simulator to Program Coordinate Measuring Machines when Common Programming Methods are difficult to apply

    Directory of Open Access Journals (Sweden)

    Gąska A.

    2014-02-01

    Full Text Available Nowadays, simulators facilitate tasks performed daily by the engineers of different branches, including coordinate metrologists. Sometimes it is difficult or almost impossible to program a Coordinate Measuring Machine (CMM using standard methods. This happens, for example, during measurements of nano elements or in cases when measurements are performed on high-precision (accurate measuring machines which work in strictly air-conditioned spaces and the presence of the operator in such room during the programming of CMM could cause an increase in temperature, which in turn could make it necessary to wait some time until conditions stabilize. This article describes functioning of a simulator and its usage during Coordinate Measuring Machine programming in the latter situation. Article also describes a general process of programming CMMs which ensures the correct machine performance after starting the program on a real machine. As an example proving the presented considerations, measurement of exemplary workpiece, which was performed on the machine working in the strictly air-conditioned room, was described

  1. NRC-BNL Benchmark Program on Evaluation of Methods for Seismic Analysis of Coupled Systems

    International Nuclear Information System (INIS)

    Chokshi, N.; DeGrassi, G.; Xu, J.

    1999-01-01

    A NRC-BNL benchmark program for evaluation of state-of-the-art analysis methods and computer programs for seismic analysis of coupled structures with non-classical damping is described. The program includes a series of benchmarking problems designed to investigate various aspects of complexities, applications and limitations associated with methods for analysis of non-classically damped structures. Discussions are provided on the benchmarking process, benchmark structural models, and the evaluation approach, as well as benchmarking ground rules. It is expected that the findings and insights, as well as recommendations from this program will be useful in developing new acceptance criteria and providing guidance for future regulatory activities involving licensing applications of these alternate methods to coupled systems

  2. Method and simulation program informed decisions in the early stages of building design

    DEFF Research Database (Denmark)

    Petersen, Steffen; Svendsen, Svend

    2010-01-01

    variations. The program then presents the output in a way that enables designers to make informed decisions. The method and the program reduce the need for design iterations, reducing time consumption and construction costs, to obtain the intended energy performance and indoor environment....... for making informed decisions in the early stages of building design to fulfil performance requirements with regard to energy consumption and indoor environment. The method is operationalised in a program that utilises a simple simulation program to make performance predictions of user-defined parameter......The early stages of building design include a number of decisions which have a strong influence on the performance of the building throughout the rest of the process. It is therefore important that designers are aware of the consequences of these design decisions. This paper presents a method...

  3. Determination of the human cytochrome P450 monooxygenase catalyzing the enantioselective oxidation of 2,2',3,5',6-pentachlorobiphenyl (PCB 95) and 2,2',3,4,4',5',6-heptachlorobiphenyl (PCB 183).

    Science.gov (United States)

    Nagayoshi, Haruna; Kakimoto, Kensaku; Konishi, Yoshimasa; Kajimura, Keiji; Nakano, Takeshi

    2017-10-17

    2,2',3,5',6-Pentachlorobiphenyl (PCB 95) and 2,2',3,4,4',5',6-heptachlorobiphenyl (PCB 183) possess axial chirality and form the aS and aR enantiomers. The enantiomers of these congeners have been reported to accumulate in the human body enantioselectively via unknown mechanisms. In this study, we determined the cytochrome P450 (CYP) monooxygenase responsible for the enantioselective oxidization of PCB 95 and PCB 183, using a recombinant human CYP monooxygenase. We evaluated 13 CYP monooxygenases, namely CYP1A1, CYP1A2, CYP1B1, CYP2A6, CYP2B6, CYP2C8, CYP2C19, CYP2E1, CYP2J2, CYP3A4, CYP3A5, CYP4F2, and aromatase (CYP19), and revealed that CYP2A6 preferably oxidizes aS-PCB 95 enantioselectively; however, it did not oxidize PCB 183. The enantiomer composition was elevated from 0.5 (racemate) to 0.54. In addition, following incubation with CYP2A6, the enantiomer fraction (EF) of PCB 95 demonstrated a time-dependent increase.

  4. Correlation of PCDD/F and PCB concentrations in soil samples from the Swiss Soil Monitoring Network (NABO) to specific parameters of the observation sites

    Energy Technology Data Exchange (ETDEWEB)

    Schmid, P.; Gujer, E.; Zennegg, M. [Swiss Federal Laboratories for Materials Testing and Research (EMPA), Duebendorf (Switzerland); Bucheli, T. [Agroscope FAL Reckenholz, Zuerich (Switzerland)

    2004-09-15

    Soils are natural sinks for persistent organic pollutants (POPs) such as polychlorinated dibenzo-pdioxins (PCDD/F) and polychlorinated biphenyls (PCB). Being lipophilic compounds, these contaminants adsorb to the organic carbon of the soil, and due to the low mobility and high persistence, they accumulate in the soil. Soil therefore represents rather a long-term archive for the atmospheric deposition than an indicator for the actual input of these compounds. In 1986, on demand of the Swiss ordinance of 9 June 1986 relating to hazardous substances in the soil, a national soil monitoring network (NABO) was set up in Switzerland aiming at monitoring the soil pollution. Sites were selected to reflect typical land use, vegetation, land management, air quality, and soil conditions in Switzerland. 50% of the sites are located on agricultural land, 30% in forests, and 20% on open land with extensive farming (alpine pastures, etc.); two sites are situated in urban parks. The sites are distributed throughout Switzerland including rural/remote areas as well as urban, urban fringe and industrial regions. Soil samples are taken every 5 years and are analysed for eight heavy metals (lead, copper, cadmium, zinc, nickel, chromium, cobalt, and mercury) as well as fluorine. So far, organic pollutants (PAH and PCB) have been determined in isolated samples only, and there is no data on PCDD/F concentrations so far. The present program was set up to fill this knowledge gap. A subset of 23 sites representing locations where contaminant immissions above average were expected was selected for PCDD/F and PCB analysis.

  5. Two-step bioleaching of copper and gold from discarded printed circuit boards (PCB).

    Science.gov (United States)

    Işıldar, Arda; van de Vossenberg, Jack; Rene, Eldon R; van Hullebusch, Eric D; Lens, Piet N L

    2016-11-01

    An effective strategy for environmentally sound biological recovery of copper and gold from discarded printed circuit boards (PCB) in a two-step bioleaching process was experimented. In the first step, chemolithotrophic acidophilic Acidithiobacillus ferrivorans and Acidithiobacillus thiooxidans were used. In the second step, cyanide-producing heterotrophic Pseudomonas fluorescens and Pseudomonas putida were used. Results showed that at a 1% pulp density (10g/L PCB concentration), 98.4% of the copper was bioleached by a mixture of A. ferrivorans and A. thiooxidans at pH 1.0-1.6 and ambient temperature (23±2°C) in 7days. A pure culture of P. putida (strain WCS361) produced 21.5 (±1.5)mg/L cyanide with 10g/L glycine as the substrate. This gold complexing agent was used in the subsequent bioleaching step using the Cu-leached (by A. ferrivorans and A. thiooxidans) PCB material, 44.0% of the gold was mobilized in alkaline conditions at pH 7.3-8.6, and 30°C in 2days. This study provided a proof-of-concept of a two-step approach in metal bioleaching from PCB, by bacterially produced lixiviants. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Importance of growth rate on Hg and PCB bioaccumulation in fish

    Science.gov (United States)

    Li, Jiajia; Haffner, G. Douglas; Patterson, Gordon; Walters, David M.; Burtnyk, Michael D.; Drouillard, Ken G.

    2018-01-01

    To evaluate the effect of fish growth on mercury (Hg) and polychlorinated biphenyls (PCBs) bioaccumulation, a non‐steady state toxicokinetic model, combined with a Wisconsin bioenergetics model, was developed to simulate Hg and PCB bioaccumulation in Bluegill (Lepomis macrochirus). The model was validated by comparing observed versus predicted Hg and PCB 180 concentrations across 5 age classes from five different waterbodies across North America. The non‐steady state model generated accurate predictions for Hg and PCB bioaccumulation in three of five waterbodies: Apsey, Sharbot and Stonelick Lake. The poor performance of the model for the Detroit River and Lake Hartwell, which were two well‐known contaminated sites with possibly high heterogeneity in spatial contamination, was attributed to changes in the feeding behavior and/ or change in prey contamination. Model simulations indicate that growth dilution is a major component of contaminant bioaccumulation patterns in fish especially during early life stages and was predicted to be more important for hydrophobic PCBs compared to Hg. Simulations which considered tissue specific growth provided some improvement in model performance particularly for PCBs in fish populations which exhibited changes in their whole body lipid content with age. Higher variation in lipid growth compared with that of lean dry protein was also observed between different bluegill populations which partially explains the greater variation in PCB bioaccumulation slopes compared with Hg across sampling sites.

  7. Analytical Study of High Concentration PCB Paint at the Heavy Water Components Test Reactor

    International Nuclear Information System (INIS)

    Lowry, N.J.

    1998-01-01

    This report provides results of an analytical study of high concentration PCB paint in a shutdown nuclear test reactor located at the US Department of Energy's Savannah River Site (SRS). The study was designed to obtain data relevant for an evaluation of potential hazards associated with the use of and exposure to such paints

  8. Analytical Study of High Concentration PCB Paint at the Heavy Water Components Test Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lowry, N.J.

    1998-10-21

    This report provides results of an analytical study of high concentration PCB paint in a shutdown nuclear test reactor located at the US Department of Energy's Savannah River Site (SRS). The study was designed to obtain data relevant for an evaluation of potential hazards associated with the use of and exposure to such paints.

  9. Development of planar CT system for multi-layer PCB inspection

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seung Ho; Youn, Hanbean; Kam, Soohwa; Park, Eunpyeong; Kim, Ho Kyung [Pusan National University, Busan (Korea, Republic of)

    2015-05-15

    X-ray defect inspection apparatus can be used in the production line to inspect the PCB. However, a simple X-ray radiography cannot discriminate defects from the multi-layer PCBs because the layers of them overlays the defects. To complement this issue, computed tomography (CT) technology is applied to the NDT system which can offer 3-dimensional information of object. However, CT requires hundreds of projection images to examine a single PCB, hence real-time inspection is nearly impossible. In this study, we develop a planar computed tomography (pCT) system appropriate for the multi-layer PCB inspection. For the image reconstruction of planar cross-section images, we use the digital tomosynthesis (DTS) concept in association with the limited angle scanning. and performance characterization of the pCT system for the PCB inspection. The 3-d Fourier characteristics and more quantitative performance, such as contrast, uniformity, depth resolution will be presented. The cross-sectional images of multi-layer PCBs will also be demonstrated.

  10. Concentration-Dependant Changes of PCB Patterns in Fish-Eating Mammals

    DEFF Research Database (Denmark)

    Boon, J.P.; van der Meer, J.; Allchin, C.R.

    1997-01-01

    Data sets on CB concentrations in fish-eating mammals from five laboratories were combined to test and refine a pharmacokinetic model. Clear differences in PCB patterns were observed between species, The ability to metabolize chlorobiphenyl (CB) congeners with vicinal H-atoms only in the ortho...

  11. Field Measurements of PCB emissions from Building Surfaces Using a New Portable Emission Test Cell

    DEFF Research Database (Denmark)

    Lyng, Nadja; Haven, Rune; Gunnarsen, Lars Bo

    2016-01-01

    The purpose of the study was to measure PCB-emission rates from indoor surfaces on-site in contaminated buildings using a newly developed portable emission test cell. Emission rates were measured from six different surfaces; three untreated surfaces and three remediated surfaces in a contaminated...

  12. Developmental Exposure to an Environmental PCB Mixture Delays the Propagation of Kindling in the Amygdala

    Science.gov (United States)

    Developmental PCB exposure impairs hearing and induces brainstem audiogenic seizures in adult offspring. The degree to which this enhanced susceptibility to seizure is manifest in other brain regions has not been examined. Thus, electrical kindling of the amygdala was used to eva...

  13. Facilitating Performance Optimization of RF PCB Designs by using Parametric Finite-Element Component Models

    DEFF Research Database (Denmark)

    Rohde, John; Toftegaard, Thomas Skjødeberg

    2012-01-01

    such as antennas and PCB traces. The models presented are benchmarked against real-life measurements and conventional circuit models. Furthermore, two example parallel-resonance circuits are designed based on interpolation of the results and validated by measurements in order to demonstrate the accuracy...

  14. Cell specific effects of PCB 126 on aryl hydrocarbone receptors in follicular cells of porcine ovaries

    Energy Technology Data Exchange (ETDEWEB)

    Wojtowicz, A.; Augustowska, K.; Gregoraszczuk, E. [Lab. of Physiology and Toxicology of Reproduction, Dept. of Animal Physiology, Inst. of Zoology, Jagiellonian Univ., Krakow (Poland)

    2004-09-15

    Polychlorinated biphenyles (PCBs) like other endocrine disrupters could interfere with natural hormones by binding to their receptors and thus mimicking the cellular response to them. They are known to possess either estrogenic or antiestrogenic properties. In our previous papers we demonstrated that PCBs are able to disrupt ovarian steroidogenesis. We found that the coplanar PCB 126 caused the decrease in estradiol secretion in whole cultured pig ovarian follicles. PCB 126 congener is structurally related to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Since TCDD effects are known to be mediated by aryl hydrocarbone receptors (AhRs), we decided to determine if PCB 126 affects signal transduction pathway activated by these receptors. It has been reported that the functional AhR is present in ovary including oocytes, granulosa and theca cells of rat, mouse, rhesus monkey and human ovary. Moreover, the expression of AhR in the rat ovary appeared to be estrous cycle-dependent, thus suggesting that AhR expression may be regulated by fluctuating hormone levels. This study was designed to investigate the effects of the non-ortho-substituted 3,3',4,4',5-pentachlorobiphenyl (PCB126) on the AhR activation, localization and protein level in pig ovarian follicle cells.

  15. Variability of PCB burden in 5 fish and sharks species of the French Mediterranean continental slope.

    Science.gov (United States)

    Cresson, Pierre; Fabri, Marie Claire; Miralles, Françoise Marco; Dufour, Jean-Louis; Elleboode, Romain; Sevin, Karine; Mahé, Kelig; Bouchoucha, Marc

    2016-05-01

    Despite being generally located far from contamination sources, deep marine ecosystems are impacted by chemicals like PCB. The PCB contamination in five fish and shark species collected in the continental slope of the Gulf of Lions (NW Mediterranean Sea) was measured, with a special focus on intra- and interspecific variability and on the driving factors. Significant differences occurred between species. Higher values were measured in Scyliorhinus canicula, Galeus melastomus and Helicolenus dactylopterus and lower values in Phycis blennoides and Lepidorhombus boscii. These differences might be explained by specific abilities to accumulate and eliminate contaminant, mostly through cytochrome P450 pathway. Interindividual variation was also high and no correlation was observed between contamination and length, age or trophic level. Despite its major importance, actual bioaccumulation of PCB in deep fish is not as documented as in other marine ecosystems, calling for a better assessment of the factors driving individual bioaccumulation mechanisms and originating high variability in PCB contamination. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Evaluation of Ion Exchange Materials in K Basin Floor Sludge and Potential Solvents for PCB Extraction from Ion Exchange Materials

    International Nuclear Information System (INIS)

    Schmidt, A.J.; Klinger, G.S.; Bredt, P.R.

    1998-01-01

    Approximately 73 m 3 of heterogeneous solid material, ''sludge,'' (upper bound estimate, Packer 1997) have accumulated at the bottom of the K Basins in the 100 K Area of the Hanford Site. This sludge is a mixture of spent fuel element corrosion products, ion exchange materials (organic and inorganic), graphite-based gasket materials, iron and aluminum metal corrosion products, sand, and debris (Makenas et al. 1996, 1997). In addition, small amounts of polychlorinated biphenyls (PCBs) have been found. These small amounts are significant from a regulatory standpoint. Ultimately, it is planned to transfer the K Basins sludge to the Hanford double shell tanks (DSTs). Chemical pretreatment is required to address criticality issues and the destruction or removal of PCBs before the K Basin sludge can be transferred to the DSTs. Eleven technologies have been evaluated (Papp 1997) as potential pretreatment methods. Based on the evaluations and engineering studies and limited testing, Fluor Daniel Hanford recommended solvent washing of the K Basin sludge, followed by nitric acid dissolution and, potentially, peroxide addition (FDH 1997). The solvent washing (extraction) and peroxide addition would be used to facilitate PCB removal and destruction. Following solvent extraction, the PCBs could be distilled and concentrated for disposal as a low-level waste. The purpose of the work reported here was to continue investigating solvent extraction, first by better identifying the ion exchange materials in the actual sludge samples and then evaluating various solvents for removing the PCBs or possibly dissolving the resins. This report documents some of the process knowledge on ion exchange materials used and spilled in the K Basins and describes the materials identified from wet sieving KE Basin floor and canister sludge and the results of other analyses. Several photographs are included to compare materials and illustrate material behavior. A summary of previous tests on solvent

  17. Current data on the background burden to the persistent organochlorine pollutants HCB, p,p'-DDE as well as PCB 138, PCB 153 and PCB 180 in plasma of the general population in Germany.

    Science.gov (United States)

    Schettgen, Thomas; Alt, Anne; Esser, Andre; Kraus, Thomas

    2015-06-01

    Despite their long-term ban, persistent organochlorine compounds like hexachlorobenzene (HCB), p,p'-dichlorodiphenylethylene (DDE) as well as polychlorinated biphenyls (PCBs) are still of environmental concern. For the evaluation of potential occupational or environmental exposures to these substances, it is essential to know the current background burden of the general population. As representative and up-to-date information is missing for Germany, we have analysed a large dataset generated in studies on potential exposure to lower chlorinated PCBs to fill this gap for the levels of HCB, DDE as well as PCB 138, PCB 153 and PCB 180. We have investigated n=2750 plasma samples of persons of the general population living in North Rhine-Westfalia and Hesse aged 6-65 years and sampled between September 2010 and March 2014. For evaluation of the age-dependent accumulation in the general population we have generated seven age groups in the collective. Our laboratory used a validated and quality controlled procedure using GC/MS for quantification of the organochlorine compounds in plasma (LOQ: 0.01μg/L). The median (95th percentile) levels for ∑ PCB 138+PCB 153+PCB 180 were 0.14 (0.73); 0.30 (0.82); 0.38 (0.88); 0.50 (1.14); 0.92; 1.58 (3.54) and 2.41 (4.82)μg/L plasma in the age groups 6-10 years (n=102), 11-17 years (n=499), 18-25 years (n=157), 26-35 years (n=710), 36-45 years (n=400), 46-55 years (n=525) and 56-65 years (n=357), respectively. Similarly, the median (95th percentile) levels of p,p'-DDE were 0.18 (1.24); 0.18 (0.74); 0.24 (0.85); 0.30 (1.20); 0.45 (1.74); 0.64 (3.25) and 0.94 (4.7)μg/L plasma. Finally, the median (95th percentile) of HCB in plasma in these age groups was 0.05 (0.10); 0.06 (0.11); 0.08 (0.15); 0.08 (0.15); 0.11 (0.22); 0.14 (0.42) and 0.20 (0.68)μg/L plasma. Our results prove an overall substantial reduction in the body burden to organochlorine compounds in Germany compared to earlier studies. However, 15% and 3.6% of the examined

  18. 77 FR 7095 - Transitional Program for Covered Business Method Patents-Definition of Technological Invention

    Science.gov (United States)

    2012-02-10

    ... 0651-AC75 Transitional Program for Covered Business Method Patents-- Definition of Technological... definition of technological invention that the Board will use in conducting transitional covered business... definition for covered business method patent in proposed Sec. 42.301(a). Additionally, the Office in a...

  19. Indefinitely preconditioned inexact Newton method for large sparse equality constrained non-linear programming problems

    Czech Academy of Sciences Publication Activity Database

    Lukšan, Ladislav; Vlček, Jan

    1998-01-01

    Roč. 5, č. 3 (1998), s. 219-247 ISSN 1070-5325 R&D Projects: GA ČR GA201/96/0918 Keywords : nonlinear programming * sparse problems * equality constraints * truncated Newton method * augmented Lagrangian function * indefinite systems * indefinite preconditioners * conjugate gradient method * residual smoothing Subject RIV: BA - General Mathematics Impact factor: 0.741, year: 1998

  20. A Smooth Newton Method for Nonlinear Programming Problems with Inequality Constraints

    Directory of Open Access Journals (Sweden)

    Vasile Moraru

    2012-02-01

    Full Text Available The paper presents a reformulation of the Karush-Kuhn-Tucker (KKT system associated nonlinear programming problem into an equivalent system of smooth equations. Classical Newton method is applied to solve the system of equations. The superlinear convergence of the primal sequence, generated by proposed method, is proved. The preliminary numerical results with a problems test set are presented.

  1. Survey of engineering computational methods and experimental programs for estimating supersonic missile aerodynamic characteristics

    Science.gov (United States)

    Sawyer, W. C.; Allen, J. M.; Hernandez, G.; Dillenius, M. F. E.; Hemsch, M. J.

    1982-01-01

    This paper presents a survey of engineering computational methods and experimental programs used for estimating the aerodynamic characteristics of missile configurations. Emphasis is placed on those methods which are suitable for preliminary design of conventional and advanced concepts. An analysis of the technical approaches of the various methods is made in order to assess their suitability to estimate longitudinal and/or lateral-directional characteristics for different classes of missile configurations. Some comparisons between the predicted characteristics and experimental data are presented. These comparisons are made for a large variation in flow conditions and model attitude parameters. The paper also presents known experimental research programs developed for the specific purpose of validating analytical methods and extending the capability of data-base programs.

  2. Species and Sex Differences in the Morphogenic Response of Primary Rodent Neurons to 3,3'-Dichlorobiphenyl (PCB 11).

    Science.gov (United States)

    Sethi, Sunjay; Keil, Kimberly P; Lein, Pamela J

    2017-12-23

    PCB 11 is an emerging global pollutant that we recently showed promotes axonal and dendritic growth in primary rat neuronal cell cultures. Here, we address the influence of sex and species on neuronal responses to PCB 11. Neuronal morphology was quantified in sex-specific primary hippocampal and cortical neuron-glia co-cultures derived from neonatal C57BL/6J mice and Sprague Dawley rats exposed for 48 h to vehicle (0.1% DMSO) or PCB 11 at concentrations ranging from 1 fM to 1 nM. Total axonal length was quantified in tau-1 immunoreactive neurons at day in vitro (DIV) 2; dendritic arborization was assessed by Sholl analysis at DIV 9 in neurons transfected with MAP2B-FusRed. In mouse cultures, PCB 11 enhanced dendritic arborization in female, but not male, hippocampal neurons and male, but not female, cortical neurons. In rat cultures, PCB 11 promoted dendritic arborization in male and female hippocampal and cortical neurons. PCB 11 also increased axonal growth in mouse and rat neurons of both sexes and neuronal cell types. These data demonstrate that PCB 11 exerts sex-specific effects on neuronal morphogenesis that vary depending on species, neurite type, and neuronal cell type. These findings have significant implications for risk assessment of this emerging developmental neurotoxicant.

  3. Uptake of dietary PCB by pregnant big brown bats (Eptesicus fuscus) and their fetuses

    Science.gov (United States)

    Clark, D.R.

    1978-01-01

    In a previous study (CLARK and LAMONT 1976), 26 pregnant big brown bats were captured, caged, and fed uncontaminated mealworms until their litters were born. Immediately after parturition, female bats and litters were frozen. Five litters included at least one dead young, and these five litters contained significantly more of the PCB, Aroclor 1260, than did the 21 litters with only living young....The present study attempted to verify that Aroclor 1260 could cause stillbirths. I fed 18 of 36 pregnant big brown bats mealworms containing 6.36 ppm of Aroclor 1260 prior to birth of their litters. Both carcasses and litters of dosed females contained approximately 10 times more PCB than their respective controls, but no additional stillbirths resulted. Three of 18 control litters included dead young, whereas the comparable ratio among litters from dosed females was one of 18. Additional comparisons involving means of litter weight, adult female weight, parturition date, days in captivity, tooth wear, and percentage fat also failed to show any effect of the PCB....The association found earlier between PCB and dead young (CLARK and LAMONT 1976) was not one of cause and effect. In both studies, bats that had not been dosed showed greater PCB residues among younger females. Among control bats in the present series, females that produced dead young were significantly younger (that is, showed significantly less tooth wear) than other females. In sum, whereas dead young seemed to have been caused by greater residues, these two factors were actually independent of each other but associated with a third factor--age of the female parent bat.

  4. Planar PCB Hazards to Fish, Wildlife, and Invertebrates: A Synoptic Review

    Science.gov (United States)

    Eisler, R.; Belisle, A.A.

    1996-01-01

    Ecological and toxicological aspects of polychlorinated biphenyls (PCBs) in the environment are reviewed with emphasis on biologically active congeners and fish and wildlife. Subtopics include sources and uses, chemical and biochemical properties, concentrations in field collections, lethal and sublethal effects, and recommendations for the protection of sensitive resources. All production of PCBs in the United States ceased in 1977. Of the 1.2 million tons of PCBs manufactured to date, about 65% are still in use in electrical equipment and 31% in various environmental compartments, and 4% were degraded or incinerated. The 209 PCB congeners and their metabolites show wide differences in biological effects. A significant part of the toxicity associated with commercial PCB mixtures is related to the presence of about 20 planar congeners, i.e., congeners without chlorine substitution in the ortho position. Toxic planar congeners, like other PCB congeners, have been detected in virtually all analyzed samples, regardless of collection locale. Planar PCB concentrations were usually highest in samples from near urban areas and in fat and liver tissues, filter-feeding bivalve mollusks, fish-eating birds, and carnivorous marine mammals. Adverse effects of planar PCBs on growth, survival, and reproduction are highly variable because of numerous biotic and abiotic modifiers, including interaction with other chemicals. In general, embryos and juveniles were the most sensitive stages tested to planar PCBs, and the chinook salmon, domestic chicken, mink, rhesus macaque, and laboratory white rat were among the most sensitive species. for protection of natural resources, most authorities now recommend (1) analyzation of environmental samples for planar and other potentially hazardous congeners; (2) exposure studies with representative species and specific congeners, alone and in combination with other environmental contaminants; (3) clarification of existing structure

  5. Indirect Evidence Link PCB Dehalogenation with Geobacteraceae in Anaerobic Sediment-Free Microcosms.

    Science.gov (United States)

    Praveckova, Martina; Brennerova, Maria V; Holliger, Christof; De Alencastro, Felippe; Rossi, Pierre

    2016-01-01

    Although polychlorinated biphenyls (PCBs) production was brought to a halt 30 years ago, recalcitrance to degradation makes them a major environmental pollutant at a global scale. Previous studies confirmed that organohalide-respiring bacteria (OHRB) were capable of utilizing chlorinated congeners as electron acceptor. OHRB belonging to the Phyla Chloroflexi and Firmicutes are nowadays considered as the main PCB-dechlorinating organisms. In this study, we aimed at exploring the involvement of other taxa in PCB dechlorination using sediment-free microcosms (SFMs) and the Delor PCB mixture. High rates of congener dehalogenation (up to 96%) were attained in long-term incubations of up to 692 days. Bacterial communities were dominated by Chloroflexi, Proteobacteria, and Firmicutes, among strictly simplified community structures composed of 12 major phyla only. In a first batch of SFMs, Dehalococcoides mccartyi closely affiliated with strains CG4 and CBDB1 was considered as the main actor associated with congener dehalogenation. Addition of 2-bromoethanesulfonate (BES), a known inhibitor of methanogenic activity in a second batch of SFMs had an adverse effect on the abundance of Dehalococcoides sp. Only two sequences affiliated to this Genus could be detected in two (out of six) BES-treated SFMs, contributing to a mere 0.04% of the communities. BES-treated SFMs showed very different community structures, especially in the contributions of organisms involved in fermentation and syntrophic activities. Indirect evidence provided by both statistical and phylogenetic analysis validated the implication of a new cluster of actors, distantly affiliated with the Family Geobacteraceae (Phylum δ-Proteobacteria), in the dehalogenation of low chlorinated PCB congeners. Members of this Family are known already for their dehalogenation capacity of chlorinated solvents. As a result, the present study widens the knowledge for the phylogenetic reservoir of indigenous PCB dechlorinating

  6. PCB and PBDE levels in a highly threatened dolphin species from the Southeastern Brazilian coast

    International Nuclear Information System (INIS)

    Lavandier, Ricardo; Arêas, Jennifer; Quinete, Natalia; Moura, Jailson F. de; Taniguchi, Satie; Montone, Rosalinda; Siciliano, Salvatore; Moreira, Isabel

    2016-01-01

    In the Northern coast of Rio de Janeiro State is located the major urban centers of the oil and gas industry of Brazil. The intense urbanization in recent decades caused an increase in human use of the coastal areas, which is constantly impacted by agricultural, industrial and wastewater discharges. Franciscana dolphin (Pontoporia blainvillei) is a small cetacean that inhabits coastal regions down to a 30 m depth. This species is considered the most threatened cetacean in the Western South Atlantic Ocean. This study investigated the levels of 52 PCB congeners and 9 PBDE congeners in liver of nine individuals found stranded or accidentally caught between 2011 and 2012 in the Northern coast of Rio de Janeiro. PCB mean levels ranged from 208 to 5543 ng g"−"1 lw and PBDEs mean concentrations varied between 13.84 and 36.94 ng g"−"1 lw. Contamination patterns suggest the previous use of Aroclor 1254, 1260 and penta-BDE mixtures in Brazil. While still few studies have assessed the organic contamination in cetaceans from the Southern Hemisphere, including Brazil, the levels found in this study could represent a health risk to these endangered species. - Highlights: • PCBs and PBDEs were measured in liver samples from Franciscana dolphins. • BDE 47, 99 and 100 were found in all individuals samples. • PCB-153, 138 and 180 were the major PCB congeners detected. • Results suggest the existence of PCBs and PBDEs contamination sources in Brazil. • PCBs and PDBEs levels could represent a risk to these endangered dolphin species. - PCB and PBDE concentrations found in Franciscana dolphins suggest the presence of contamination sources in Southeastern Brazil and could represent a high health risk to these endangered species.

  7. Physical exercise reduces pyruvate carboxylase (PCB) and contributes to hyperglycemia reduction in obese mice.

    Science.gov (United States)

    Muñoz, Vitor Rosetto; Gaspar, Rafael Calais; Crisol, Barbara Moreira; Formigari, Guilherme Pedron; Sant'Ana, Marcella Ramos; Botezelli, José Diego; Gaspar, Rodrigo Stellzer; da Silva, Adelino S R; Cintra, Dennys Esper; de Moura, Leandro Pereira; Ropelle, Eduardo Rochete; Pauli, José Rodrigo

    2018-07-01

    The present study evaluated the effects of exercise training on pyruvate carboxylase protein (PCB) levels in hepatic tissue and glucose homeostasis control in obese mice. Swiss mice were distributed into three groups: control mice (CTL), fed a standard rodent chow; diet-induced obesity (DIO), fed an obesity-inducing diet; and a third group, which also received an obesity-inducing diet, but was subjected to an exercise training protocol (DIO + EXE). Protocol training was carried out for 1 h/d, 5 d/wk, for 8 weeks, performed at an intensity of 60% of exhaustion velocity. An insulin tolerance test (ITT) was performed in the last experimental week. Twenty-four hours after the last physical exercise session, the animals were euthanized and the liver was harvested for molecular analysis. Firstly, DIO mice showed increased epididymal fat and serum glucose and these results were accompanied by increased PCB and decreased p-Akt in hepatic tissue. On the other hand, physical exercise was able to increase the performance of the mice and attenuate PCB levels and hyperglycemia in DIO + EXE mice. The above findings show that physical exercise seems to be able to regulate hyperglycemia in obese mice, suggesting the participation of PCB, which was enhanced in the obese condition and attenuated after a treadmill running protocol. This is the first study to be aimed at the role of exercise training in hepatic PCB levels, which may be a novel mechanism that can collaborate to reduce the development of hyperglycemia and type 2 diabetes in DIO mice.

  8. Dietary Selenium as a Modulator of PCB 126–Induced Hepatotoxicity in Male Sprague-Dawley Rats

    Science.gov (United States)

    Lai, Ian K.; Chai, Yingtao; Simmons, Donald; Watson, Walter H.; Tan, Rommel; Haschek, Wanda M.; Wang, Kai; Wang, Bingxuan; Ludewig, Gabriele; Robertson, Larry W.

    2011-01-01

    Homeostasis of selenium (Se), a critical antioxidant incorporated into amino acids and enzymes, is disrupted by exposure to aryl hydrocarbon receptor (AhR) agonists. Here we examined the importance of dietary Se in preventing the toxicity of the most toxic polychlorinated biphenyl congener, 3,3′,4,4′,5-pentachlorobiphenyl (PCB 126), a potent AhR agonist. Male Sprague-Dawley rats were fed a modified AIN-93 diet with differing dietary Se levels (0.02, 0.2, and 2 ppm). Following 3 weeks of acclimatization, rats from each dietary group were given a single ip injection of corn oil (vehicle), 0.2, 1, or 5 μmol/kg body weight PCB 126, followed 2 weeks later by euthanasia. PCB exposure caused dose-dependent increases in liver weight and at the highest PCB 126 dose decreases in whole body weight gains. Hepatic cytochrome P-450 (CYP1A1) activity was significantly increased even at the lowest dose of PCB 126, indicating potent AhR activation. PCB exposure diminished hepatic Se levels in a dose-dependent manner, and this was accompanied by diminished Se-dependent glutathione peroxidase activity. Both these effects were partially mitigated by Se supplementation. Conversely, thioredoxin (Trx) reductase activity and Trx oxidation state, although significantly diminished in the lowest dietary Se groups, were not affected by PCB exposure. In addition, PCB 126–induced changes in hepatic copper, iron, manganese, and zinc were observed. These results demonstrate that supplemental dietary Se was not able to completely prevent the toxicity caused by PCB 126 but was able to increase moderately the levels of several key antioxidants, thereby maintaining them roughly at normal levels. PMID:21865291

  9. Parametric synthesis of a robust controller on a base of mathematical programming method

    Science.gov (United States)

    Khozhaev, I. V.; Gayvoronskiy, S. A.; Ezangina, T. A.

    2018-05-01

    Considered paper is dedicated to deriving sufficient conditions, linking root indices of robust control quality with coefficients of interval characteristic polynomial, on the base of mathematical programming method. On the base of these conditions, a method of PI- and PID-controllers, providing aperiodic transient process with acceptable stability degree and, subsequently, acceptable setting time, synthesis was developed. The method was applied to a problem of synthesizing a controller for a depth control system of an unmanned underwater vehicle.

  10. AUTOMR: An automatic processing program system for the molecular replacement method

    International Nuclear Information System (INIS)

    Matsuura, Yoshiki

    1991-01-01

    An automatic processing program system of the molecular replacement method AUTMR is presented. The program solves the initial model of the target crystal structure using a homologous molecule as the search model. It processes the structure-factor calculation of the model molecule, the rotation function, the translation function and the rigid-group refinement successively in one computer job. Test calculations were performed for six protein crystals and the structures were solved in all of these cases. (orig.)

  11. COMPARISON OF CRM PROGRAMS BASING ON IMPROVING CUSTOMER PROFITABILITY: USING THE AHP METHOD

    Directory of Open Access Journals (Sweden)

    Dong-Fei Xue

    2014-04-01

    Full Text Available In this paper, we generalize the cause-related marketing (CRM methods that used by most current enterprises. And then, we probe into the difference of the effects of different types of CRM programs aiming at improving customer profitability by analytic hierarchy process (AHP. Consequently, we find out the sequencing results and provide some reference to the enterprises while performing CRM programs.

  12. Software documentation and user's manual for fish-impingement sampling design and estimation method computer programs

    International Nuclear Information System (INIS)

    Murarka, I.P.; Bodeau, D.J.

    1977-11-01

    This report contains a description of three computer programs that implement the theory of sampling designs and the methods for estimating fish-impingement at the cooling-water intakes of nuclear power plants as described in companion report ANL/ES-60. Complete FORTRAN listings of these programs, named SAMPLE, ESTIMA, and SIZECO, are given and augmented with examples of how they are used

  13. Research on numerical method for multiple pollution source discharge and optimal reduction program

    Science.gov (United States)

    Li, Mingchang; Dai, Mingxin; Zhou, Bin; Zou, Bin

    2018-03-01

    In this paper, the optimal method for reduction program is proposed by the nonlinear optimal algorithms named that genetic algorithm. The four main rivers in Jiangsu province, China are selected for reducing the environmental pollution in nearshore district. Dissolved inorganic nitrogen (DIN) is studied as the only pollutant. The environmental status and standard in the nearshore district is used to reduce the discharge of multiple river pollutant. The research results of reduction program are the basis of marine environmental management.

  14. Method for Statically Checking an Object-oriented Computer Program Module

    Science.gov (United States)

    Bierhoff, Kevin M. (Inventor); Aldrich, Jonathan (Inventor)

    2012-01-01

    A method for statically checking an object-oriented computer program module includes the step of identifying objects within a computer program module, at least one of the objects having a plurality of references thereto, possibly from multiple clients. A discipline of permissions is imposed on the objects identified within the computer program module. The permissions enable tracking, from among a discrete set of changeable states, a subset of states each object might be in. A determination is made regarding whether the imposed permissions are violated by a potential reference to any of the identified objects. The results of the determination are output to a user.

  15. Analysis the evaluation of reinforces concrete structure Block 62 by Non Destructive Method, Destructive Method and Esteem Computer Program

    International Nuclear Information System (INIS)

    Mohd Jamil Hashim; Norhazwani Mohd Azahari

    2012-01-01

    The evaluation of old and unrecorded building is a difficult task to work on. This is because no detail record of building component such as reinforce concrete strength test record, type of reinforcement used, construction methods and soil investigation (SI) which make it impossible to analyse. Through NDT building reinforced concrete component is easily evaluated and mean while DT method give assurance through actual sample testing. From these early result detail drawing plans can be rebuild and building forensic work can be done. These data will be fed into the computer program to produce a structure evaluation result whether it is safe or not in accordance to design standard BS8110. (author)

  16. Implementing and evaluating a program to facilitate chronic disease prevention and screening in primary care: a mixed methods program evaluation.

    Science.gov (United States)

    Manca, Donna Patricia; Aubrey-Bassler, Kris; Kandola, Kami; Aguilar, Carolina; Campbell-Scherer, Denise; Sopcak, Nicolette; O'Brien, Mary Ann; Meaney, Christopher; Faria, Vee; Baxter, Julia; Moineddin, Rahim; Salvalaggio, Ginetta; Green, Lee; Cave, Andrew; Grunfeld, Eva

    2014-10-08

    The objectives of this paper are to describe the planned implementation and evaluation of the Building on Existing Tools to Improve Chronic Disease Prevention and Screening in Primary Care (BETTER 2) program which originated from the BETTER trial. The pragmatic trial, informed by the Chronic Care Model, demonstrated the effectiveness of an approach to Chronic Disease Prevention and Screening (CDPS) involving the use of a new role, the prevention practitioner. The desired goals of the program are improved clinical outcomes, reduction in the burden of chronic disease, and improved sustainability of the health-care system through improved CDPS in primary care. The BETTER 2 program aims to expand the implementation of the intervention used in the original BETTER trial into communities across Canada (Alberta, Ontario, Newfoundland and Labrador, the Northwest Territories and Nova Scotia). This proactive approach provides at-risk patients with an intervention from the prevention practitioner, a health-care professional. Using the BETTER toolkit, the prevention practitioner determines which CDPS actions the patient is eligible to receive, and through shared decision-making and motivational interviewing, develops a unique and individualized 'prevention prescription' with the patient. This intervention is 1) personalized; 2) addressing multiple conditions; 3) integrated through linkages to local, regional, or national resources; and 4) longitudinal by assessing patients over time. The BETTER 2 program brings together primary care providers, policy/decision makers and researchers to work towards improving CDPS in primary care. The target patient population is adults aged 40-65. The reach, effectiveness, adoption, implementation, maintain (RE-AIM) framework will inform the evaluation of the program through qualitative and quantitative methods. A composite index will be used to quantitatively assess the effectiveness of the prevention practitioner intervention. The CDPS actions

  17. Light Water Reactor Sustainability Program: Evaluation of Localized Cable Test Methods for Nuclear Power Plant Cable Aging Management Programs

    Energy Technology Data Exchange (ETDEWEB)

    Glass, Samuel W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fifield, Leonard S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hartman, Trenton S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-05-30

    This Pacific Northwest National Laboratory (PNNL) milestone report describes progress to date on the investigation of nondestructive test (NDE) methods focusing particularly on local measurements that provide key indicators of cable aging and damage. The work includes a review of relevant literature as well as hands-on experimental verification of inspection capabilities. As NPPs consider applying for second, or subsequent, license renewal (SLR) to extend their operating period from 60 years to 80 years, it important to understand how the materials installed in plant systems and components will age during that time and develop aging management programs (AMPs) to assure continued safe operation under normal and design basis events (DBE). Normal component and system tests typically confirm the cables can perform their normal operational function. The focus of the cable test program is directed toward the more demanding challenge of assuring the cable function under accident or DBE. Most utilities already have a program associated with their first life extension from 40 to 60 years. Regrettably, there is neither a clear guideline nor a single NDE that can assure cable function and integrity for all cables. Thankfully, however, practical implementation of a broad range of tests allows utilities to develop a practical program that assures cable function to a high degree. The industry has adopted 50% elongation at break (EAB) relative to the un-aged cable condition as the acceptability standard. All tests are benchmarked against the cable EAB test. EAB is a destructive test so the test programs must apply an array of other NDE tests to assure or infer the overall set of cable’s system integrity. These cable NDE programs vary in rigor and methodology. As the industry gains experience with the efficacy of these programs, it is expected that implementation practice will converge to a more common approach. This report addresses the range of local NDE cable tests that are

  18. APPLYING ROBUST RANKING METHOD IN TWO PHASE FUZZY OPTIMIZATION LINEAR PROGRAMMING PROBLEMS (FOLPP

    Directory of Open Access Journals (Sweden)

    Monalisha Pattnaik

    2014-12-01

    Full Text Available Background: This paper explores the solutions to the fuzzy optimization linear program problems (FOLPP where some parameters are fuzzy numbers. In practice, there are many problems in which all decision parameters are fuzzy numbers, and such problems are usually solved by either probabilistic programming or multi-objective programming methods. Methods: In this paper, using the concept of comparison of fuzzy numbers, a very effective method is introduced for solving these problems. This paper extends linear programming based problem in fuzzy environment. With the problem assumptions, the optimal solution can still be theoretically solved using the two phase simplex based method in fuzzy environment. To handle the fuzzy decision variables can be initially generated and then solved and improved sequentially using the fuzzy decision approach by introducing robust ranking technique. Results and conclusions: The model is illustrated with an application and a post optimal analysis approach is obtained. The proposed procedure was programmed with MATLAB (R2009a version software for plotting the four dimensional slice diagram to the application. Finally, numerical example is presented to illustrate the effectiveness of the theoretical results, and to gain additional managerial insights. 

  19. An object-oriented class design for the generalized finite element method programming

    Directory of Open Access Journals (Sweden)

    Dorival Piedade Neto

    Full Text Available The Generalized Finite Element Method (GFEM is a numerical method based on the Finite Element Method (FEM, presenting as its main feature the possibility of improving the solution by means of local enrichment functions. In spite of its advantages, the method demands a complex data structure, which can be especially benefited by the Object-Oriented Programming (OOP. Even though the OOP for the traditional FEM has been extensively described in the technical literature, specific design issues related to the GFEM are yet little discussed and not clearly defined. In the present article it is described an Object-Oriented (OO class design for the GFEM, aiming to achieve a computational code that presents a flexible class structure, circumventing the difficulties associated to the method characteristics. The proposed design is evaluated by means of some numerical examples, computed using a code implemented in Python programming language.

  20. Remediation of PCB-contaminated soils. Risk analysis of biological in situ processes

    Energy Technology Data Exchange (ETDEWEB)

    Rein, Arno

    2006-12-08

    Biological in situ measures can be efficient and cost effective options for the remediation of contaminated sites. However, the accepted application requires a detailed and reliable analysis of potential impacts. An important objective is to quantify the potential of contaminant degradation and metabolite formation. This thesis addresses a quantitative multimedia risk assessment. Methodologies and tools were developed for this objective and applied to evaluate in situ bioremediation of soils contaminated with polychlorinated biphenyls (PCBs). Soil bacteria in conjunction with plant roots were addressed (rhizoremediation) with a focus on the use of genetically modified microorganisms (GMOs). PCBs are known to be harmful compounds that are ubiquitously distributed in the environment. PCB contaminations in soil and groundwater were identified as important problems. 209 different congeners are sterically possible, but not all are of environmental significance. PCB congeners of concern were evaluated with respect to their potential toxicity, environmental occurrence and mobility. For this objective, congener specific data on the toxicity potential and the frequency in environmental matrices were collected. To quantify the mobility potential, multimedia modelling was performed applying deterministic and probabilistic procedures. 56 PCB congeners of concern were evaluated, and multimedia risk assessments of PCB-contaminated soils should concentrate on this group. Kinetics parameters were specified for degradation experiments with individual PCB congeners in solution and different bacterial strains. These laboratory assays were performed with wild-type Burkholderia sp. strain LB400 and the genetically modified Pseudomonas fluorescens strains F113pcb and F113L::1180. The F113 derivatives demonstrated a good survival ability in willow (Salix sp.) rhizosphere (mesocosm experiments). Therefore, and due to high depletion rates, rhizoremediation with F113L::1180 and willow

  1. A standard analysis method (SAM) for the automated analysis of polychlorinated biphenyls (PCBs) in soils using the chemical analysis automation (CAA) paradigm: validation and performance

    International Nuclear Information System (INIS)

    Rzeszutko, C.; Johnson, C.R.; Monagle, M.; Klatt, L.N.

    1997-10-01

    The Chemical Analysis Automation (CAA) program is developing a standardized modular automation strategy for chemical analysis. In this automation concept, analytical chemistry is performed with modular building blocks that correspond to individual elements of the steps in the analytical process. With a standardized set of behaviors and interactions, these blocks can be assembled in a 'plug and play' manner into a complete analysis system. These building blocks, which are referred to as Standard Laboratory Modules (SLM), interface to a host control system that orchestrates the entire analytical process, from sample preparation through data interpretation. The integrated system is called a Standard Analysis Method (SAME). A SAME for the automated determination of Polychlorinated Biphenyls (PCB) in soils, assembled in a mobile laboratory, is undergoing extensive testing and validation. The SAME consists of the following SLMs: a four channel Soxhlet extractor, a High Volume Concentrator, column clean up, a gas chromatograph, a PCB data interpretation module, a robot, and a human- computer interface. The SAME is configured to meet the requirements specified in U.S. Environmental Protection Agency's (EPA) SW-846 Methods 3541/3620A/8082 for the analysis of pcbs in soils. The PCB SAME will be described along with the developmental test plan. Performance data obtained during developmental testing will also be discussed

  2. FURNACE; a toroidal geometry neutronic program system method description and users manual

    International Nuclear Information System (INIS)

    Verschuur, K.A.

    1984-12-01

    The FURNACE program system performs neutronic and photonic calculations in 3D toroidal geometry for application to fusion reactors. The geometry description is quite general, allowing any torus cross section and any neutron source density distribution for the plasma, as well as simple parametric representations of circular, elliptic and D-shaped tori and plasmas. The numerical method is based on an approximate transport model that produces results with sufficient accuracy for reactor-design purposes, at acceptable calculational costs. A short description is given of the numerical method, and a user manual for the programs of the system: FURNACE, ANISN-PT, LIBRA, TAPEMA and DRAWER is presented

  3. Hanford environmental analytical methods (methods as of March 1990). Appendix A3-O and Appendix A3-I

    Energy Technology Data Exchange (ETDEWEB)

    Goheen, S.D.; McCulloch, M.; Daniel, J.L.

    1993-05-01

    Information is provided on the techniques employed towards the chemical analysis of volatile, semi-volatile matter, pesticides and PCB`s at the Hanford Reservation. Sample preparation methods are included.

  4. PCDD/F and WHO-PCB contamination in an industrialized area in Brazil. First results of atmospheric monitoring and the use of Tillandsia usneoides (L) as biomonitor

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, M. de S. [Dept. de Geoquimica, Univ. Federal Fluminense. Niteroi, RJ (Brazil); Waller, U.; Reifenhaeuser, W.; Koerner, W. [Bavarian Environmental Protection Agency, Augsburg (Germany); Torres, J.P.; Malm, O. [Inst. de Biofisica, CCS-UFRJ. Ilha do Fundao, RJ (Brazil)

    2004-09-15

    A major issue of concern in developing countries like Brazil is to conciliate increasing industrialization rates to secure health and environmental standards already required to promote the free market among countries. This was pointed out during the United Nations Conference on Environment and Development in Rio de Janeiro in 1992 (Agenda 21). There it became clear that Brazil needs to develop better methods and techniques for environmental monitoring in order to control pollution sources and promote sustainable development. Among dozens of different kinds of persistent organic pollutants, polychlorinated dibenzodioxins and dibenzofurans (PCDD/PCDF) and polychlorinated biphenyls (PCB) are a matter of great concern due to their persistence, bioaccumulation and toxicological properties. PCDD and PCDF are unwanted by-products from the combustion of organic material containing trace amounts of chlorine set free in both stationary thermal sources and diffuse fuel burning. They can also be present as unwanted by-products of various industrial and metallurgical processes and metal recycling and smelters. PCB are ubiquitous contaminants of the environment and can be produced during thermal processes. In spite of their high environmental persistence and relevance in human health concerns, legal aspects regarding maximum emission limits and control of these contaminants are absent in Brazil at present. Moreover, the absence of adequately equipped laboratories and human resources together with the high costs associated hampers the research and monitoring of these contaminants in Brazil. The present work is a first report of the monitoring of total deposition rates of PCDD/PCDF and PCB in Volta Redonda City, a highly industrialized area in Rio de Janeiro State. Simultaneously, the use of an endemic Bromeliad species, Tillandsia usneoides (L), an epiphytic bromeliad, as a possible bio-monitor for persistent organochlorine compounds was investigated.

  5. A two-step method for developing a control rod program for boiling water reactors

    International Nuclear Information System (INIS)

    Taner, M.S.; Levine, S.H.; Hsiao, M.Y.

    1992-01-01

    This paper reports on a two-step method that is established for the generation of a long-term control rod program for boiling water reactors (BWRs). The new method assumes a time-variant target power distribution in core depletion. In the new method, the BWR control rod programming is divided into two steps. In step 1, a sequence of optimal, exposure-dependent Haling power distribution profiles is generated, utilizing the spectral shift concept. In step 2, a set of exposure-dependent control rod patterns is developed by using the Haling profiles generated at step 1 as a target. The new method is implemented in a computer program named OCTOPUS. The optimization procedure of OCTOPUS is based on the method of approximation programming, in which the SIMULATE-E code is used to determine the nucleonics characteristics of the reactor core state. In a test in cycle length over a time-invariant, target Haling power distribution case because of a moderate application of spectral shift. No thermal limits of the core were violated. The gain in cycle length could be increased further by broadening the extent of the spetral shift

  6. Monitoring serum PCB levels in the adult population of the Canary Islands (Spain

    Directory of Open Access Journals (Sweden)

    Guillermo Burillo-Putze

    2015-07-01

    Full Text Available Polychlorinated biphenyls (PCBs are persistent organic chemicals that have been detected in human serum or tissues all over the world. These pollutants could exert a number of deleterious effects on humans and wildlife, including carcinogenic processes. The Spanish population of the Canary Islands was evaluated with respect to PCB levels more than ten years ago showing lower levels than other Western populations. The objective of our study was to assess the current level of contamination by PCBs showed by this population. We measured serum PCBs in a sample of healthy adult subjects (206 serum samples from subjects with an average age of 66 years old to evaluate the potential modification of PCB serum levels in this population during the last decade. PCB congeners (28, 52, 77, 81, 101, 105, 114, 118, 123, 126, 138, 153, 156, 157, 167, 169, 180, and 189 were measured by gas chromatography-mass spectrometry (GC/MS. Our results showed that PCB residues were found in 84% of serum samples analyzed, the congeners 28, 153 and 180 being the most frequently detected and at the highest median values (0.1 ng/mL. In addition, the median concentration of the sum of those PCBs considered as markers of environmental contamination by these chemicals (Marker-PCBs was 0.6 ng/mL, reaching values as high as as 2.6 ng/mL in the 95th percentile. Levels of the sum of PCBs with toxic effects similar to dioxins (dioxin-like PCBs reached median values of 0.4 ng/mL in the 95th percentile. The reported levels are similar to those described previously in this population more than ten years ago, in the sense that the inhabitants of the Canary Archipelago show levels of PCB contamination lower than the majority of populations from developed countries. These findings suggest that currently there is not any active source of these chemicals in this archipelago. Nevertheless, as foods seem to be a relevant source for these compounds, Public Health authorities should monitor the

  7. Methods and challenges for the health impact assessment of vaccination programs in Latin America

    Directory of Open Access Journals (Sweden)

    Ana Marli Christovam Sartori

    2015-01-01

    Full Text Available ABSTRACT OBJECTIVE To describe methods and challenges faced in the health impact assessment of vaccination programs, focusing on the pneumococcal conjugate and rotavirus vaccines in Latin America and the Caribbean. METHODS For this narrative review, we searched for the terms "rotavirus", "pneumococcal", "conjugate vaccine", "vaccination", "program", and "impact" in the databases Medline and LILACS. The search was extended to the grey literature in Google Scholar. No limits were defined for publication year. Original articles on the health impact assessment of pneumococcal and rotavirus vaccination programs in Latin America and the Caribbean in English, Spanish or Portuguese were included. RESULTS We identified 207 articles. After removing duplicates and assessing eligibility, we reviewed 33 studies, 25 focusing on rotavirus and eight on pneumococcal vaccination programs. The most frequent studies were ecological, with time series analysis or comparing pre- and post-vaccination periods. The main data sources were: health information systems; population-, sentinel- or laboratory-based surveillance systems; statistics reports; and medical records from one or few health care services. Few studies used primary data. Hospitalization and death were the main outcomes assessed. CONCLUSIONS Over the last years, a significant number of health impact assessments of pneumococcal and rotavirus vaccination programs have been conducted in Latin America and the Caribbean. These studies were carried out few years after the programs were implemented, meet the basic methodological requirements and suggest positive health impact. Future assessments should consider methodological issues and challenges arisen in these first studies conducted in the region.

  8. Monteray Mark-I: Computer program (PC-version) for shielding calculation with Monte Carlo method

    International Nuclear Information System (INIS)

    Pudjijanto, M.S.; Akhmad, Y.R.

    1998-01-01

    A computer program for gamma ray shielding calculation using Monte Carlo method has been developed. The program is written in WATFOR77 language. The MONTERAY MARH-1 is originally developed by James Wood. The program was modified by the authors that the modified version is easily executed. Applying Monte Carlo method the program observe photon gamma transport in an infinity planar shielding with various thick. A photon gamma is observed till escape from the shielding or when its energy less than the cut off energy. Pair production process is treated as pure absorption process that annihilation photons generated in the process are neglected in the calculation. The out put data calculated by the program are total albedo, build-up factor, and photon spectra. The calculation result for build-up factor of a slab lead and water media with 6 MeV parallel beam gamma source shows that they are in agreement with published data. Hence the program is adequate as a shielding design tool for observing gamma radiation transport in various media

  9. Cost Savings From the Provision of Specific Methods of Contraception in a Publicly Funded Program

    Science.gov (United States)

    Rostovtseva, Daria P.; Brindis, Claire D.; Biggs, M. Antonia; Hulett, Denis; Darney, Philip D.

    2009-01-01

    Objectives. We examined the cost-effectiveness of contraceptive methods dispensed in 2003 to 955 000 women in Family PACT (Planning, Access, Care and Treatment), California's publicly funded family planning program. Methods. We estimated the number of pregnancies averted by each contraceptive method and compared the cost of providing each method with the savings from averted pregnancies. Results. More than half of the 178 000 averted pregnancies were attributable to oral contraceptives, one fifth to injectable methods, and one tenth each to the patch and barrier methods. The implant and intrauterine contraceptives were the most cost-effective, with cost savings of more than $7.00 for every $1.00 spent in services and supplies. Per $1.00 spent, injectable contraceptives yielded savings of $5.60; oral contraceptives, $4.07; the patch, $2.99; the vaginal ring, $2.55; barrier methods, $1.34; and emergency contraceptives, $1.43. Conclusions. All contraceptive methods were cost-effective—they saved more in public expenditures for unintended pregnancies than they cost to provide. Because no single method is clinically recommended to every woman, it is medically and fiscally advisable for public health programs to offer all contraceptive methods. PMID:18703437

  10. Using Mixed Methods and Collaboration to Evaluate an Education and Public Outreach Program (Invited)

    Science.gov (United States)

    Shebby, S.; Shipp, S. S.

    2013-12-01

    Traditional indicators (such as the number of participants or Likert-type ratings of participant perceptions) are often used to provide stakeholders with basic information about program outputs and to justify funding decisions. However, use of qualitative methods can strengthen the reliability of these data and provide stakeholders with more meaningful information about program challenges, successes, and ultimate impacts (Stern, Stame, Mayne, Forss, David & Befani, 2012). In this session, presenters will discuss how they used a mixed methods evaluation to determine the impact of an education and public outreach (EPO) program. EPO efforts were intended to foster more effective, sustainable, and efficient utilization of science discoveries and learning experiences through three main goals 1) increase engagement and support by leveraging of resources, expertise, and best practices; 2) organize a portfolio of resources for accessibility, connectivity, and strategic growth; and 3) develop an infrastructure to support coordination. The evaluation team used a mixed methods design to conduct the evaluation. Presenters will first discuss five potential benefits of mixed methods designs: triangulation of findings, development, complementarity, initiation, and value diversity (Greene, Caracelli & Graham, 2005). They will next demonstrate how a 'mix' of methods, including artifact collection, surveys, interviews, focus groups, and vignettes, was included in the EPO project's evaluation design, providing specific examples of how alignment between the program theory and the evaluation plan was best achieved with a mixed methods approach. The presentation will also include an overview of different mixed methods approaches and information about important considerations when using a mixed methods design, such as selection of data collection methods and sources, and the timing and weighting of quantitative and qualitative methods (Creswell, 2003). Ultimately, this presentation will

  11. Waste Tank Organic Safety Program: Analytical methods development. Progress report, FY 1994

    International Nuclear Information System (INIS)

    Campbell, J.A.; Clauss, S.A.; Grant, K.E.

    1994-09-01

    The objectives of this task are to develop and document extraction and analysis methods for organics in waste tanks, and to extend these methods to the analysis of actual core samples to support the Waste Tank organic Safety Program. This report documents progress at Pacific Northwest Laboratory (a) during FY 1994 on methods development, the analysis of waste from Tank 241-C-103 (Tank C-103) and T-111, and the transfer of documented, developed analytical methods to personnel in the Analytical Chemistry Laboratory (ACL) and 222-S laboratory. This report is intended as an annual report, not a completed work

  12. Novel methods for Solving Economic Dispatch of Security-Constrained Unit Commitment Based on Linear Programming

    Science.gov (United States)

    Guo, Sangang

    2017-09-01

    There are two stages in solving security-constrained unit commitment problems (SCUC) within Lagrangian framework: one is to obtain feasible units’ states (UC), the other is power economic dispatch (ED) for each unit. The accurate solution of ED is more important for enhancing the efficiency of the solution to SCUC for the fixed feasible units’ statues. Two novel methods named after Convex Combinatorial Coefficient Method and Power Increment Method respectively based on linear programming problem for solving ED are proposed by the piecewise linear approximation to the nonlinear convex fuel cost functions. Numerical testing results show that the methods are effective and efficient.

  13. Content Validity of National Post Marriage Educational Program Using Mixed Methods

    Science.gov (United States)

    MOHAJER RAHBARI, Masoumeh; SHARIATI, Mohammad; KERAMAT, Afsaneh; YUNESIAN, Masoud; ESLAMI, Mohammad; MOUSAVI, Seyed Abbas; MONTAZERI, Ali

    2015-01-01

    Background: Although the validity of content of program is mostly conducted with qualitative methods, this study used both qualitative and quantitative methods for the validation of content of post marriage training program provided for newly married couples. Content validity is a preliminary step of obtaining authorization required to install the program in country's health care system. Methods: This mixed methodological content validation study carried out in four steps with forming three expert panels. Altogether 24 expert panelists were involved in 3 qualitative and quantitative panels; 6 in the first item development one; 12 in the reduction kind, 4 of them were common with the first panel, and 10 executive experts in the last one organized to evaluate psychometric properties of CVR and CVI and Face validity of 57 educational objectives. Results: The raw data of post marriage program had been written by professional experts of Ministry of Health, using qualitative expert panel, the content was more developed by generating 3 topics and refining one topic and its respective content. In the second panel, totally six other objectives were deleted, three for being out of agreement cut of point and three on experts' consensus. The validity of all items was above 0.8 and their content validity indices (0.8–1) were completely appropriate in quantitative assessment. Conclusion: This study provided a good evidence for validation and accreditation of national post marriage program planned for newly married couples in health centers of the country in the near future. PMID:26056672

  14. System and Method for Providing a Climate Data Analytic Services Application Programming Interface Distribution Package

    Science.gov (United States)

    Schnase, John L. (Inventor); Duffy, Daniel Q. (Inventor); Tamkin, Glenn S. (Inventor)

    2016-01-01

    A system, method and computer-readable storage devices for providing a climate data analytic services application programming interface distribution package. The example system can provide various components. The system provides a climate data analytic services application programming interface library that enables software applications running on a client device to invoke the capabilities of a climate data analytic service. The system provides a command-line interface that provides a means of interacting with a climate data analytic service by issuing commands directly to the system's server interface. The system provides sample programs that call on the capabilities of the application programming interface library and can be used as templates for the construction of new client applications. The system can also provide test utilities, build utilities, service integration utilities, and documentation.

  15. Final report. Paducah Gaseous Diffusion Plant PCB sediment survey: Big Bayou Creek and Little Bayou Creek, Paducah, Kentucky

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-12-01

    Laboratory analysis of collected samples along drainage features at PGDP. Report documents levels of PCB contamination and considers locations of contamination and known releases to theorize probable sources to further investigate.

  16. Distinguishing PCB Isomeric Congeners with their Gas Chromatographic and Mass Spectrometric Ortho Effect using Comprehensive Gas Chromatography

    Science.gov (United States)

    The 209 polychlorinated biphenyl (PCB) congeners and associated nine isomeric groups (nine groups of PCBs with the same degree of chlorination) have been long recorded as high endocrine disrupting chemicals in the environment. Difficult analytical problems exist, in those frequen...

  17. Risk-Based Disposal Plan for PCB Paint in the TRA Fluorinel Dissolution Process Mockup and Gamma Facilities Canal

    Energy Technology Data Exchange (ETDEWEB)

    R. A. Montgomery

    2008-05-01

    This Toxic Substances Control Act Risk-Based Polychlorinated Biphenyl Disposal plan was developed for the Test Reactor Area Fluorinel Dissolution Process Mockup and Gamma Facilities Waste System, located in Building TRA-641 at the Reactor Technology Complex, Idaho National Laboratory Site, to address painted surfaces in the empty canal under 40 CFR 761.62(c) for paint, and under 40 CFR 761.61(c) for PCBs that may have penetrated into the concrete. The canal walls and floor will be painted with two coats of contrasting non-PCB paint and labeled as PCB. The canal is covered with open decking; the access grate is locked shut and signed to indicate PCB contamination in the canal. Access to the canal will require facility manager permission. Protective equipment for personnel and equipment entering the canal will be required. Waste from the canal, generated during ultimate Decontamination and Decommissioning, shall be managed and disposed as PCB Bulk Product Waste.

  18. Dependent failure analysis research for the US NRC Risk Methods Integration and Evaluation Program

    International Nuclear Information System (INIS)

    Bohn, M.P.; Stack, D.W.; Campbell, D.J.; Rooney, J.J.; Rasmuson, D.M.

    1985-01-01

    The Risk Methods Integration and Evaluation Program (RMIEP), which is being performed for the Nuclear Regulatory Commission by Sandia National Laboratories, has the goals of developing new risk assessment methods and integrating the new and existing methods in a uniform procedure for performing an in-depth probabilistic risk assessment (PRA) with consistent levels of analysis for internal, external, and dependent failure scenarios. An important part of RMIEP is the recognition of the crucial importance of dependent common cause failures (CCFs) and the pressing need to develop effective methods for analyzing CCFs as part of a PRA. The NRC-sponsored Integrated Dependent Failure Methodology Program at Sandia is addressing this need. This paper presents a preliminary approach for analyzing CCFs as part of a PRA. A nine-step procedure for efficiently screening and analyzing dependent failure scenarios is presented, and each step is discussed

  19. Linear programming models and methods of matrix games with payoffs of triangular fuzzy numbers

    CERN Document Server

    Li, Deng-Feng

    2016-01-01

    This book addresses two-person zero-sum finite games in which the payoffs in any situation are expressed with fuzzy numbers. The purpose of this book is to develop a suite of effective and efficient linear programming models and methods for solving matrix games with payoffs in fuzzy numbers. Divided into six chapters, it discusses the concepts of solutions of matrix games with payoffs of intervals, along with their linear programming models and methods. Furthermore, it is directly relevant to the research field of matrix games under uncertain economic management. The book offers a valuable resource for readers involved in theoretical research and practical applications from a range of different fields including game theory, operational research, management science, fuzzy mathematical programming, fuzzy mathematics, industrial engineering, business and social economics. .

  20. LAMP-B: a Fortran program set for the lattice cell analysis by collision probability method

    International Nuclear Information System (INIS)

    Tsuchihashi, Keiichiro

    1979-02-01

    Nature of physical problem solved: LAMB-B solves an integral transport equation by the collision probability method for many variety of lattice cell geometries: spherical, plane and cylindrical lattice cell; square and hexagonal arrays of pin rods; annular clusters and square clusters. LAMP-B produces homogenized constants for multi and/or few group diffusion theory programs. Method of solution: LAMP-B performs an exact numerical integration to obtain the collision probabilities. Restrictions on the complexity of the problem: Not more than 68 group in the fast group calculation, and not more than 20 regions in the resonance integral calculation. Typical running time: It varies with the number of energy groups and the selection of the geometry. Unusual features of the program: Any or any combination of constituent subprograms can be used so that the partial use of this program is available. (author)

  1. Loyalty program: current content, types and methods of realization at B2C market

    Directory of Open Access Journals (Sweden)

    Nehaenko Ekaterina

    2015-11-01

    Full Text Available The article is devoted to researching the content of the key concepts for partnership relations marketing – customer loyalty. It presents the results of scientific-theoretical substantiation of the typical structure and methods of implementation of loyalty programs in retail.

  2. 20 CFR 617.23 - Selection of training methods and programs.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Selection of training methods and programs. 617.23 Section 617.23 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR... for which training is undertaken shall not preclude the development of an individual retraining...

  3. 76 FR 38281 - Federal Employees Health Benefits Program: New Premium Rating Method for Most Community Rated...

    Science.gov (United States)

    2011-06-29

    ... CFR Parts 1602, 1615, et al. Federal Employees Health Benefits Program: New Premium Rating Method for... Part 890; 48 CFR Parts 1602, 1615, 1632, and 1652 RIN 3206-AM39 Federal Employees Health Benefits..., 2011 (76 FR 36857). The document amends the Federal Employees Health Benefits (FEHB) regulations at 5...

  4. 49 CFR 192.945 - What methods must an operator use to measure program effectiveness?

    Science.gov (United States)

    2010-10-01

    ... (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.945 What methods must an operator use to measure program...

  5. Homotopy Method for a General Multiobjective Programming Problem under Generalized Quasinormal Cone Condition

    Directory of Open Access Journals (Sweden)

    X. Zhao

    2012-01-01

    Full Text Available A combined interior point homotopy continuation method is proposed for solving general multiobjective programming problem. We prove the existence and convergence of a smooth homotopy path from almost any interior initial interior point to a solution of the KKT system under some basic assumptions.

  6. Comparing the Medicaid Retrospective Drug Utilization Review Program Cost-Savings Methods Used by State Agencies.

    Science.gov (United States)

    Prada, Sergio I

    2017-12-01

    The Medicaid Drug Utilization Review (DUR) program is a 2-phase process conducted by Medicaid state agencies. The first phase is a prospective DUR and involves electronically monitoring prescription drug claims to identify prescription-related problems, such as therapeutic duplication, contraindications, incorrect dosage, or duration of treatment. The second phase is a retrospective DUR and involves ongoing and periodic examinations of claims data to identify patterns of fraud, abuse, underutilization, drug-drug interaction, or medically unnecessary care, implementing corrective actions when needed. The Centers for Medicare & Medicaid Services requires each state to measure prescription drug cost-savings generated from its DUR programs on an annual basis, but it provides no guidance or unified methodology for doing so. To describe and synthesize the methodologies used by states to measure cost-savings using their Medicaid retrospective DUR program in federal fiscal years 2014 and 2015. For each state, the cost-savings methodologies included in the Medicaid DUR 2014 and 2015 reports were downloaded from Medicaid's website. The reports were then reviewed and synthesized. Methods described by the states were classified according to research designs often described in evaluation textbooks. In 2014, the most often used prescription drugs cost-savings estimation methodology for the Medicaid retrospective DUR program was a simple pre-post intervention method, without a comparison group (ie, 12 states). In 2015, the most common methodology used was a pre-post intervention method, with a comparison group (ie, 14 states). Comparisons of savings attributed to the program among states are still unreliable, because of a lack of a common methodology available for measuring cost-savings. There is great variation among states in the methods used to measure prescription drug utilization cost-savings. This analysis suggests that there is still room for improvement in terms of

  7. Toxicological profile of ultrapure 2,2',3,4,4',5,5'-heptachlorbiphenyl (PCB 180) in adult rats.

    Science.gov (United States)

    Viluksela, Matti; Heikkinen, Päivi; van der Ven, Leo T M; Rendel, Filip; Roos, Robert; Esteban, Javier; Korkalainen, Merja; Lensu, Sanna; Miettinen, Hanna M; Savolainen, Kari; Sankari, Satu; Lilienthal, Hellmuth; Adamsson, Annika; Toppari, Jorma; Herlin, Maria; Finnilä, Mikko; Tuukkanen, Juha; Leslie, Heather A; Hamers, Timo; Hamscher, Gerd; Al-Anati, Lauy; Stenius, Ulla; Dervola, Kine-Susann; Bogen, Inger-Lise; Fonnum, Frode; Andersson, Patrik L; Schrenk, Dieter; Halldin, Krister; Håkansson, Helen

    2014-01-01

    PCB 180 is a persistent non-dioxin-like polychlorinated biphenyl (NDL-PCB) abundantly present in food and the environment. Risk characterization of NDL-PCBs is confounded by the presence of highly potent dioxin-like impurities. We used ultrapure PCB 180 to characterize its toxicity profile in a 28-day repeat dose toxicity study in young adult rats extended to cover endocrine and behavioral effects. Using a loading dose/maintenance dose regimen, groups of 5 males and 5 females were given total doses of 0, 3, 10, 30, 100, 300, 1000 or 1700 mg PCB 180/kg body weight by gavage. Dose-responses were analyzed using benchmark dose modeling based on dose and adipose tissue PCB concentrations. Body weight gain was retarded at 1700 mg/kg during loading dosing, but recovered thereafter. The most sensitive endpoint of toxicity that was used for risk characterization was altered open field behavior in females; i.e. increased activity and distance moved in the inner zone of an open field suggesting altered emotional responses to unfamiliar environment and impaired behavioral inhibition. Other dose-dependent changes included decreased serum thyroid hormones with associated histopathological changes, altered tissue retinoid levels, decreased hematocrit and hemoglobin, decreased follicle stimulating hormone and luteinizing hormone levels in males and increased expression of DNA damage markers in liver of females. Dose-dependent hypertrophy of zona fasciculata cells was observed in adrenals suggesting activation of cortex. There were gender differences in sensitivity and toxicity profiles were partly different in males and females. PCB 180 adipose tissue concentrations were clearly above the general human population levels, but close to the levels in highly exposed populations. The results demonstrate a distinct toxicological profile of PCB 180 with lack of dioxin-like properties required for assignment of WHO toxic equivalency factor. However, PCB 180 shares several toxicological

  8. Green tea diet decreases PCB 126-induced oxidative stress in mice by up-regulating antioxidant enzymes.

    Science.gov (United States)

    Newsome, Bradley J; Petriello, Michael C; Han, Sung Gu; Murphy, Margaret O; Eske, Katryn E; Sunkara, Manjula; Morris, Andrew J; Hennig, Bernhard

    2014-02-01

    Superfund chemicals such as polychlorinated biphenyls pose a serious human health risk due to their environmental persistence and link to multiple diseases. Selective bioactive food components such as flavonoids have been shown to ameliorate PCB toxicity, but primarily in an in vitro setting. Here, we show that mice fed a green tea-enriched diet and subsequently exposed to environmentally relevant doses of coplanar PCB exhibit decreased overall oxidative stress primarily due to the up-regulation of a battery of antioxidant enzymes. C57BL/6 mice were fed a low-fat diet supplemented with green tea extract (GTE) for 12 weeks and exposed to 5 μmol PCB 126/kg mouse weight (1.63 mg/kg-day) on weeks 10, 11 and 12 (total body burden: 4.9 mg/kg). F2-isoprostane and its metabolites, established markers of in vivo oxidative stress, measured in plasma via HPLC-MS/MS exhibited fivefold decreased levels in mice supplemented with GTE and subsequently exposed to PCB compared to animals on a control diet exposed to PCB. Livers were collected and harvested for both messenger RNA and protein analyses, and it was determined that many genes transcriptionally controlled by aryl hydrocarbon receptor and nuclear factor (erythroid-derived 2)-like 2 proteins were up-regulated in PCB-exposed mice fed the green tea-supplemented diet. An increased induction of genes such as SOD1, GSR, NQO1 and GST, key antioxidant enzymes, in these mice (green tea plus PCB) may explain the observed decrease in overall oxidative stress. A diet supplemented with green tea allows for an efficient antioxidant response in the presence of PCB 126, which supports the emerging paradigm that healthful nutrition may be able to bolster and buffer a physiological system against the toxicities of environmental pollutants. Copyright © 2014 Elsevier Inc. All rights reserved.

  9. Development of three-dimensional program based on Monte Carlo and discrete ordinates bidirectional coupling method

    International Nuclear Information System (INIS)

    Han Jingru; Chen Yixue; Yuan Longjun

    2013-01-01

    The Monte Carlo (MC) and discrete ordinates (SN) are the commonly used methods in the design of radiation shielding. Monte Carlo method is able to treat the geometry exactly, but time-consuming in dealing with the deep penetration problem. The discrete ordinate method has great computational efficiency, but it is quite costly in computer memory and it suffers from ray effect. Single discrete ordinates method or single Monte Carlo method has limitation in shielding calculation for large complex nuclear facilities. In order to solve the problem, the Monte Carlo and discrete ordinates bidirectional coupling method is developed. The bidirectional coupling method is implemented in the interface program to transfer the particle probability distribution of MC and angular flux of discrete ordinates. The coupling method combines the advantages of MC and SN. The test problems of cartesian and cylindrical coordinate have been calculated by the coupling methods. The calculation results are performed with comparison to MCNP and TORT and satisfactory agreements are obtained. The correctness of the program is proved. (authors)

  10. Advanced Topics in Computational Partial Differential Equations: Numerical Methods and Diffpack Programming

    International Nuclear Information System (INIS)

    Katsaounis, T D

    2005-01-01

    The scope of this book is to present well known simple and advanced numerical methods for solving partial differential equations (PDEs) and how to implement these methods using the programming environment of the software package Diffpack. A basic background in PDEs and numerical methods is required by the potential reader. Further, a basic knowledge of the finite element method and its implementation in one and two space dimensions is required. The authors claim that no prior knowledge of the package Diffpack is required, which is true, but the reader should be at least familiar with an object oriented programming language like C++ in order to better comprehend the programming environment of Diffpack. Certainly, a prior knowledge or usage of Diffpack would be a great advantage to the reader. The book consists of 15 chapters, each one written by one or more authors. Each chapter is basically divided into two parts: the first part is about mathematical models described by PDEs and numerical methods to solve these models and the second part describes how to implement the numerical methods using the programming environment of Diffpack. Each chapter closes with a list of references on its subject. The first nine chapters cover well known numerical methods for solving the basic types of PDEs. Further, programming techniques on the serial as well as on the parallel implementation of numerical methods are also included in these chapters. The last five chapters are dedicated to applications, modelled by PDEs, in a variety of fields. In summary, the book focuses on the computational and implementational issues involved in solving partial differential equations. The potential reader should have a basic knowledge of PDEs and the finite difference and finite element methods. The examples presented are solved within the programming framework of Diffpack and the reader should have prior experience with the particular software in order to take full advantage of the book. Overall

  11. PCB 136 Atropselectively Alters Morphometric and Functional Parameters of Neuronal Connectivity in Cultured Rat Hippocampal Neurons via Ryanodine Receptor-Dependent Mechanisms

    Science.gov (United States)

    Yang, Dongren; Kania-Korwel, Izabela; Ghogha, Atefeh; Chen, Hao; Stamou, Marianna; Bose, Diptiman D.; Pessah, Isaac N.; Lehmler, Hans-Joachim; Lein, Pamela J.

    2014-01-01

    We recently demonstrated that polychlorinated biphenyl (PCB) congeners with multiple ortho chlorine substitutions sensitize ryanodine receptors (RyRs), and this activity promotes Ca2+-dependent dendritic growth in cultured neurons. Many ortho-substituted congeners display axial chirality, and we previously reported that the chiral congener PCB 136 (2,2′,3,3′,6,6′-hexachlorobiphenyl) atropselectively sensitizes RyRs. Here, we test the hypothesis that PCB 136 atropisomers differentially alter dendritic growth and other parameters of neuronal connectivity influenced by RyR activity. (−)-PCB 136, which potently sensitizes RyRs, enhances dendritic growth in primary cultures of rat hippocampal neurons, whereas (+)-PCB 136, which lacks RyR activity, has no effect on dendritic growth. The dendrite-promoting activity of (−)-PCB 136 is observed at concentrations ranging from 0.1 to 100nM and is blocked by pharmacologic RyR antagonism. Neither atropisomer alters axonal growth or cell viability. Quantification of PCB 136 atropisomers in hippocampal cultures indicates that atropselective effects on dendritic growth are not due to differential partitioning of atropisomers into cultured cells. Imaging of hippocampal neurons loaded with Ca2+-sensitive dye demonstrates that (−)-PCB 136 but not (+)-PCB 136 increases the frequency of spontaneous Ca2+ oscillations. Similarly, (−)-PCB 136 but not (+)-PCB 136 increases the activity of hippocampal neurons plated on microelectrode arrays. These data support the hypothesis that atropselective effects on RyR activity translate into atropselective effects of PCB 136 atropisomers on neuronal connectivity, and suggest that the variable atropisomeric enrichment of chiral PCBs observed in the human population may be a significant determinant of individual susceptibility for adverse neurodevelopmental outcomes following PCB exposure. PMID:24385416

  12. Editor's Highlight: Congener-Specific Disposition of Chiral Polychlorinated Biphenyls in Lactating Mice and Their Offspring: Implications for PCB Developmental Neurotoxicity.

    Science.gov (United States)

    Kania-Korwel, Izabela; Lukasiewicz, Tracy; Barnhart, Christopher D; Stamou, Marianna; Chung, Haeun; Kelly, Kevin M; Bandiera, Stelvio; Lein, Pamela J; Lehmler, Hans-Joachim

    2017-07-01

    Chiral polychlorinated biphenyl (PCB) congeners have been implicated by laboratory and epidemiological studies in PCB developmental neurotoxicity. These congeners are metabolized by cytochrome P450 (P450) enzymes to potentially neurotoxic hydroxylated metabolites (OH-PCBs). The present study explores the enantioselective disposition and toxicity of 2 environmentally relevant, neurotoxic PCB congeners and their OH-PCB metabolites in lactating mice and their offspring following dietary exposure of the dam. Female C57BL/6N mice (8-weeks old) were fed daily, beginning 2 weeks prior to conception and continuing throughout gestation and lactation, with 3.1 µmol/kg bw/d of racemic 2,2',3,5',6-pentachlorobiphenyl (PCB 95) or 2,2',3,3',6,6'-hexachlorobiphenyl (PCB 136) in peanut butter; controls received vehicle (peanut oil) in peanut butter. PCB 95 levels were higher than PCB 136 levels in both dams and pups, consistent with the more rapid metabolism of PCB 136 compared with PCB 95. In pups and dams, both congeners were enriched for the enantiomer eluting second on enantioselective gas chromatography columns. OH-PCB profiles in lactating mice and their offspring were complex and varied according to congener, tissue and age. Developmental exposure to PCB 95 versus PCB 136 differentially affected the expression of P450 enzymes as well as neural plasticity (arc and ppp1r9b) and thyroid hormone-responsive genes (nrgn and mbp). The results suggest that the enantioselective metabolism of PCBs to OH-PCBs may influence neurotoxic outcomes following developmental exposures, a hypothesis that warrants further investigation. © The Author 2017. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  13. Organochlorines in benthic invertebrates and sediments from the Dutch Wadden Sea; identification of individual PCB components

    Science.gov (United States)

    Duinker, J. C.; Hillebrand, M. T. J.; Boon, J. P.

    Concentrations of organochlorines were determined in Macoma balthica, Arenicola marina, Crangon crangon and sediments from the Dutch Wadden Sea. Maximum concentrations of (total) PCB, γ-HCH and dieldrin were found in the western part; a pronounced maximum of HCB was found in the western part. Concentrations of PCB, p,p'-DDD and p,p'-DDE in sediment were correlated with the percentage of particles metabolism, were lower in Crangon. The patterns of pentachloro- and higher chlorinated biphenyls were equal in Macoma, Arenicola and sediments. Since these components are not found in solution, they must be taken up from sediment and food. The results are in agreement with partitioning between body lipids and water as the dominant mechanism determining concentrations of persistent lipophilic contaminants in the animals. Partitioning with the ambient water may also determine the concentrations in the sediment.

  14. PCB concentrations in sediments from the Gulf of Nicoya estuary, Pacific coast of Costa Rica

    Directory of Open Access Journals (Sweden)

    Alison L Spongberg

    2004-12-01

    Full Text Available Thirty-one sediment samples collected from 1996-2003 from the Gulf of Nicoya estuary on the north- western coast of Costa Rica, have been obtained for PCB analyses. This is part of the first study to evaluate the PCB contamination in coastal Costa Rica.Overall, the concentrations are low, especially when compared to sediments from more temperate climates and/or sediments from more heavily industrialized areas. Values average less than 3 ng/g dw sediment, however, a few samples contained up to 7 ng/g dw sediment. Sediments with the highest concentrations were located in the Punta Morales area, where muds were sampled from among mangrove roots. The Puntarenas samples had surprisingly low PCB concentrations, likely due to their sandy lithology. The congener distribution within the majority of the samples showed signs of either recent sources or lack of degradation. However, a few sites, specifically some of the inter-gulf islands and more remote samples had congener distributions indicative of airborne contaminants and/or degradation. Considering the presence of air-borne PCBs in the Gulf of Papagayo to the north, the lack of airborne PCBs and more varied congener distribution in the Gulf of Nicoya estuary was surprisingSe analizó los bifenilos policlorados (PCB en 31 muestras de sedimentos colectadas entre 1996 -2003 en el estuario del Golfo de Nicoya, costa noroeste de Costa Rica. Esto es parte de un primer estudio para evaluar la contaminación por PCB en aguas costeras de Costa Rica. En general, las concentraciones fueron bajas especialmente cuando se les compara con sedimentos de climas templados y / o sedimentos de areas altamente industrializadas. Los valores promedio son inferiores a 3 ng / dw (peso seco de sedimento. Sin embargo, unas pocas muestras contienen hasta 7 ng/ g dw de sedimento. Los sedimentos con las concentraciones más altas están localizados en el area de Punta Morales, en cienos de entre raíces de mangle. Las

  15. Evolution study of contamination Russian Baltic fish by PCDD/F and WHO-PCB

    Energy Technology Data Exchange (ETDEWEB)

    Shelepchikov, A.; Brodsky, E. [Inst. of Ecology and Evolution of Russian Academy of Sciences (IPEE RAS) (Russian Federation); Shenderyuk, V.; Baholdina, L. [Atlantic Research Inst. of Fish Industry and Oceanography, (AtlantNIRO) (Russian Federation)

    2004-09-15

    Baltic Sea is well known as the most polluted sea in the world, but its fish products have a significant role in diet of Baltic countries habitants. In Dioxin 2003 meeting we have present first results of analysis of Baltic fishes caught by Russian fisherman for market. The results confirmed a rather high level of pollution in the Baltic seafood by PCDD/Fs and have shown necessity of the further researches. Although PCDD/Fs profile in fisher's body is not consist unsteady and was formed under affection of various factors, it was obvious that essential path comes with PCB; also previously were found that WHO-TEQ{sub PCB} in seafood could exceed WHO-TEQ{sub PCDD/F} level. In given works we present results of the analysis of two freshwater species of fishes and updating research of former analyzed kinds, included of WHO-PCBs determination.

  16. PCDD/F and PCB in spruce forests of the Alps

    Energy Technology Data Exchange (ETDEWEB)

    Offenthaler, I., E-mail: ivo.offenthaler@umweltbundesamt.a [Austrian Environment Agency, Spittelauer Laende 5, 1090 Vienna (Austria); Bassan, R. [Regional Agency for Environmental Prevention and Protection of Veneto (Italy); Belis, C. [Regional Agency for Environmental Protection of Lombardia (Italy); Jakobi, G.; Kirchner, M. [Helmholtz Zentrum Muenchen (German Research Centre for Environmental Health) (Germany); Kraeuchi, N. [WSL-Swiss Federal Institute for Forest, Snow and Landscape Research (Switzerland); Moche, W. [Austrian Environment Agency, Spittelauer Laende 5, 1090 Vienna (Austria); Schramm, K.-W. [Helmholtz Zentrum Muenchen (German Research Centre for Environmental Health) (Germany); Sedivy, I. [WSL-Swiss Federal Institute for Forest, Snow and Landscape Research (Switzerland); Simoncic, P. [Slovenian Forestry Institute (Slovenia); Uhl, M.; Weiss, P. [Austrian Environment Agency, Spittelauer Laende 5, 1090 Vienna (Austria)

    2009-12-15

    PCDD/F and PCB concentrations in remote mountainous spruce stands of the Central European Alps show strong geographic variation. Independent of the matrix (0.5 year old needles, humus or mineral soil), the highest pollutant levels were always found at the lateral zones of the mountain range. High levels coincided with strong precipitation, particularly along the northern margin of the study region. The most volatile PCB congener propagated farther into the colder, drier central Alps than the heavier species. Matrices with different accumulation history (needles and humus) repeatedly reflected different spatial immission patterns. Consistent with its much longer exposure, pollutant levels in humus exceeded those of needles by up to two orders of magnitude. Needle contamination varied with altitude but the vertical trends were highly variable between transsects and changed between years, too. - Dioxin-like pollution of forests in the Alps shows strong geographic variation.

  17. Enhanced desorption of PCB and trace metal elements (Pb and Cu) from contaminated soils by saponin and EDDS mixed solution

    International Nuclear Information System (INIS)

    Cao, Menghua; Hu, Yuan; Sun, Qian; Wang, Linling; Chen, Jing; Lu, Xiaohua

    2013-01-01

    This study investigated the simultaneous desorption of trace metal elements and polychlorinated biphenyl (PCB) from mixed contaminated soil with a novel combination of biosurfactant saponin and biodegradable chelant S,S-ethylenediaminedisuccinic acid (EDDS). Results showed significant promotion and synergy on Pb, Cu and PCB desorption with the mixed solution of saponin and EDDS. The maximal desorption of Pb, Cu and PCB were achieved 99.8%, 85.7% and 45.7%, respectively, by addition of 10 mM EDDS and 3000 mg L −1 saponin. The marked interaction between EDDS and saponin contributed to the synergy performance. The sorption of EDDS and saponin on soil was inhibited by each other. EDDS could enhance the complexation of metals with the saponin micelles and the solubilization capabilities of saponin micelles for PCB. Our study suggests the combination of saponin and EDDS would be a promising alternative for remediation of co-contaminated soils caused by hydrophobic organic compounds (HOCs) and metals. -- Highlights: ► A novel combination of biosurfactant saponin and EDDS was used to simultaneously remove mixed contaminations from soil. ► Significant synergy on Pb, Cu and PCB desorption were achieved with EDDS/saponin. ► The marked interaction between EDDS and saponin contributed to the synergy performance. -- Significant synergistic effect on Pb, Cu and PCB desorption were achieved with the mixed solution of saponin and EDDS

  18. A comparison of PCB bioaccumulation factors between an arctic and a temperate marine food web.

    Science.gov (United States)

    Sobek, Anna; McLachlan, Michael S; Borgå, Katrine; Asplund, Lillemor; Lundstedt-Enkel, Katrin; Polder, Anuschka; Gustafsson, Orjan

    2010-06-01

    To test how environmental conditions in the Arctic and the resulting ecological adaptations affect accumulation of persistent organic pollutants (POPs) in the marine food web, bioaccumulation of four polychlorinated biphenyls (PCBs) in an arctic (Barents Sea 77 degrees N-82 degrees N) and a temperate marine (Baltic Sea 54 degrees N-62 degrees N) food web were compared. Three different trophic levels were studied (zooplankton, fish, and seal), representing the span from first-level consumer to top predator. Previously published high-quality data on PCB water concentrations in the two areas were used for calculation of bioaccumulation factors (BAF). BAF was calculated as the ratio of the PCB concentration in the organism ([PCB](org); pg/kg lipid) to the dissolved water concentration (C(w); pg/L). The BAF(Arctic):BAF(Temperate) ratios were above 1 for all four PCB congeners in zooplankton (6.4-13.8) and planktivorous fish (2.9-5.0)), whereas the ratios were below 1 in seal. The mean ratio between arctic and temperate BAFs for all trophic levels and congeners (BAF(Arcti):BAF(Temperate)) was 4.8. When the data were corrected for the seawater temperature difference between the two ecosystems, the ratio was 2.0. We conclude that bioaccumulation differences caused by ecological or physiological adaptations of organisms between the two ecosystems were well within a water concentration variability of 50%. Further, our data support the hypothesis that lower seawater temperature lead to a thermodynamically favoured passive partitioning to organic matrices and thus elevated ambient BAFs in the Arctic compared to the Baltic Sea. This would imply that bioaccumulation in the Arctic may be described in the same way as bioaccumulation in temperate regions, e.g. by the use of mechanistic models parameterised for the Arctic. Copyright (c) 2010. Published by Elsevier B.V.

  19. Mercury accumulation and the mercury-PCB-sex interaction in summer flounder

    Science.gov (United States)

    Madenjian, Charles P.; Jensen, Olaf P.; Krabbenhoft, David P.; DeWild, John F.; Ogorek, Jacob M.; Vastano, Anthony R.

    2016-01-01

    Patterns in the relative differences in contaminant concentrations between the sexes of mature fish may reveal important behavioral and physiological differences between the sexes. We determined whole-fish total mercury (Hg) concentrations in 23 female summer flounder (Paralichthys dentatus) and 27 male summer flounder from New Jersey coastal waters. To estimate the change in Hg concentration due to release of eggs at spawning, Hg concentration in the somatic tissue and ovaries of 5 of the 23 female summer flounder were also determined. To ascertain whether most of the Hg in the summer flounder was methylmercury (MeHg), whole-fish MeHg concentrations were determined in all 50 summer flounder. Whole-fish Hg concentrations averaged 113 ng/g for females and 111 ng/g for males. Thus, females were 2% higher in Hg concentration than males, on average, but the difference was not statistically significant. Based on Hg determinations in the somatic tissue and ovaries, we predicted that Hg concentration of females would increase by 3.6%, on average, immediately after spawning due to release of eggs. On average, 92% of the Hg in the summer flounder was MeHg. To determine whether the effect of sex on Hg concentration was significantly different from the effect of sex on polychlorinated biphenyl (PCB) concentration, we paired our Hg determinations with PCB determinations from a previous study, and applied regression analysis. Sex significantly interacted with contaminant type (Hg or PCBs), as males were 43% higher in PCB concentration than females, whereas females were 2% higher in Hg concentration than males. Males eliminating Hg from their bodies at a faster rate than females was a likely explanation for this discrepancy between the two contaminant types. Overall, the Hg and PCB concentrations in the summer flounder were relatively low, and therefore our findings also had implications for continued operation of the summer flounder fishery.

  20. Unintentional PCB in chlorophenylsilanes as a source of contamination in environmental samples

    Energy Technology Data Exchange (ETDEWEB)

    Anezaki, Katsunori, E-mail: anezaki@hro.or.jp [Hokkaido Research Organization, Environmental and Geological Research Department, Institute of Environmental Sciences, N19W12, Kita, Sapporo, Hokkaido (Japan); Nakano, Takeshi [Center for Advanced Science and Innovation, Osaka University, Osaka (Japan)

    2015-04-28

    Highlights: • PCB concentrations were studied in silicone-based adhesives and chlorophenylsilanes. • Congener patterns (CP) were studied in adhesives and chlorophenylsilanes. • High concentrations of PCBs were detected in dichlorodiphenylsilane. • In commercial adhesives, PCBs with similar CP to dichlorodiphenylsilane were found. • CP were affected by the chlorobenzene used for synthesizing chlorophenylsilanes. - Abstract: This paper discusses the concentrations and congener patterns of PCBs unintentionally present in chlorophenylsilanes. Chlorophenylsilanes are used in the production of silicone-based adhesives and phenyl silicones. The concentration of PCBs in adhesives was found to range from not-detectable concentrations to 40 mg/kg. The concentrations of PCBs in trichlorophenylsilane, dichlorodiphenylsilane, chlorotriphenylsilane, and diphenylsilanediol were 0.00072–2.7, 6.5–1,500, 0.019–1.1, and 0.12–120 mg/kg, respectively. Dichlorodiphenylsilane and diphenylsilanediol, in particular, had high PCB concentrations. The PCB concentration of some specimens exceeded the 50 mg/kg limit set by the transportation regulations of the Stockholm Convention. In the adhesives and chlorophenylsilanes, mono- and di-chlorinated biphenyls were detected in high proportions. The congeners detected in dichlorinated biphenyls had a structure in which one chlorine atom was substituted at each of the two aryls of the biphenyl backbone. This indicated that the chlorobenzene used for synthesizing chlorophenylsilanes undergoes dimerization. The congener and homologue patterns of the adhesives containing PCBs were similar to dichlorodiphenylsilane and diphenylsilanediol. It was concluded that the production of the adhesives is based on these substances. In addition, these results indicate that silicone-based products may become a source of PCBs in the environment, leading to irregular PCB values in environmental analysis.

  1. A comparison of PCB bioaccumulation factors between an arctic and a temperate marine food web

    International Nuclear Information System (INIS)

    Sobek, Anna; McLachlan, Michael S.; Borga, Katrine; Asplund, Lillemor; Lundstedt-Enkel, Katrin; Polder, Anuschka; Gustafsson, Orjan

    2010-01-01

    To test how environmental conditions in the Arctic and the resulting ecological adaptations affect accumulation of persistent organic pollutants (POPs) in the marine food web, bioaccumulation of four polychlorinated biphenyls (PCBs) in an arctic (Barents Sea 77 o N-82 o N) and a temperate marine (Baltic Sea 54 o N-62 o N) food web were compared. Three different trophic levels were studied (zooplankton, fish, and seal), representing the span from first-level consumer to top predator. Previously published high-quality data on PCB water concentrations in the two areas were used for calculation of bioaccumulation factors (BAF). BAF was calculated as the ratio of the PCB concentration in the organism ([PCB] org ; pg/kg lipid) to the dissolved water concentration (C w ; pg/L). The BAF Arctic :BAF Temperate ratios were above 1 for all four PCB congeners in zooplankton (6.4-13.8) and planktivorous fish (2.9-5.0)), whereas the ratios were below 1 in seal. The mean ratio between arctic and temperate BAFs for all trophic levels and congeners (BAF Arcti :BAF Temperate ) was 4.8. When the data were corrected for the seawater temperature difference between the two ecosystems, the ratio was 2.0. We conclude that bioaccumulation differences caused by ecological or physiological adaptations of organisms between the two ecosystems were well within a water concentration variability of 50%. Further, our data support the hypothesis that lower seawater temperature lead to a thermodynamically favoured passive partitioning to organic matrices and thus elevated ambient BAFs in the Arctic compared to the Baltic Sea. This would imply that bioaccumulation in the Arctic may be described in the same way as bioaccumulation in temperate regions, e.g. by the use of mechanistic models parameterised for the Arctic.

  2. Impacts of alternative allowance allocation methods under a cap-and-trade program in power sector

    International Nuclear Information System (INIS)

    Liu Beibei; He Pan; Zhang Bing; Bi Jun

    2012-01-01

    Emission trading is considered to be a cost-effective environmental economic instrument for pollution control. However, the policy design of an emission trading program has a decisive impact on its performance. Allowance allocation is one of the most important policy design issues in emission trading, not only for equity but also for policy performance. In this research, an artificial market for sulfur dioxide (SO 2 ) emission trading was constructed by applying an agent-based model. The performance of the Jiangsu SO 2 emission trading market was examined under different allowance allocation methods and transaction costs. The results showed that the market efficiency of emission trading would be affected by the allocation methods when the transaction costs are positive. The auction allowance allocation method was more efficient and had the lowest total emission control costs than the other three allocation methods examined. However, the use of this method will require that power plants pay for all of their allowance, and doing so will increase the production costs of power plants. On the other hand, output-based allowance allocation is the second best method. - Highlights: ► The impact of allowance allocation methods is examined for a cap-and-trade program. ► The market efficiency would be distinct when the transaction costs are positive. ► The auction method would have lowest total emission control costs.

  3. Dioxins, DL-PCB and NDL-PCB accumulation profiles in livers from sheep and cattle reared in North-western Italy.

    Science.gov (United States)

    Benedetto, A; Brizio, P; Guaraldo, P; Stella, C; Cappa, C; Baioni, E; Spalenza, V; Nebbia, C; Abete, M C

    2016-06-01

    Products of animal origin represent the main route of human exposure to dioxins and dioxin-like PCBs (DL-compounds). Recently, concerns have been raised about ovine products, particularly the liver, in which relatively high levels of DL-compounds have been reported. We surveyed ovine and bovine livers in areas with no known sources of dioxin or DL-PCB contamination, in order to assess accumulation patterns for both DL-compounds and non-DL (NDL-) PCBs. None of the ovine and bovine samples exceeded the current Maximum Limits (MLs) for DL-compounds. Liver DL-compound TEQ concentrations were up to 5-fold higher in sheep than in cows. No statistically significant differences in total NDL-PCBs levels were found. The main contributors to TEQ levels were the Penta- and Hexa-chlorinated PCDFs and PCB 126. The results confirm the increased bioaccumulation in ovine liver towards specific DL-compounds even in ewes reared in areas with no known sources of PCDD/Fs or DL-PCBs contamination. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. RODDRP - A FORTRAN program for use in control rod calibration by the rod drop method

    International Nuclear Information System (INIS)

    Wilson, W.E.

    1972-01-01

    The different methods to measure reactivity which are applicable to control rod calibration are discussed. They include: 1) the positive period method, 2) the rod drop method, 3) the source-jerk method, 4) the rod oscillation method, and 5) the pulsed neutron method. The instrument setup used at WSU for rod drop measurements is presented. To speed up the analysis of power fall-off trace, a FORTRAN IV program called RODDRP was written to simultaneously solve the in-hour equation and relative neutron flux. The procedure for calculating the worth of the rod that produced the power trace is given. The reactivity for each time relative flux point is obtained. Conclusions about the status of the equipment are made

  5. [The German program for disease management guidelines. Background, methods, and development process].

    Science.gov (United States)

    Ollenschläger, Günter; Kopp, Ina; Lelgemann, Monika; Sänger, Sylvia; Heymans, Lothar; Thole, Henning; Trapp, Henrike; Lorenz, Wilfried; Selbmann, Hans-Konrad; Encke, Albrecht

    2006-10-15

    The Program for National Disease Management Guidelines (German DM-CPG Program) was established in 2002 by the German Medical Association (umbrella organization of the German Chambers of Physicians) and joined by the Association of the Scientific Medical Societies (AWMF; umbrella organization of more than 150 professional societies) and by the National Association of Statutory Health Insurance Physicians (NASHIP) in 2003. The program provides a conceptual basis for disease management, focusing on high-priority health-care topics and aiming at the implementation of best practice recommendations for prevention, acute care, rehabilitation and chronic care. It is organized by the German Agency for Quality in Medicine, a founding member of the Guidelines International Network (G-I-N). The main objective of the German DM-CPG Program is to establish consensus of the medical professions on evidence-based key recommendations covering all sectors of health-care provision and facilitating the coordination of care for the individual patient through time and across interfaces. Within the last year, DM-CPGs have been published for asthma, chronic obstructive pulmonary disease, type 2 diabetes, and coronary heart disease. In addition, experts from national patient self-help groups have been developing patient guidance based upon the recommendations for health-care providers. The article describes background, methods, and tools of the DM-CPG Program, and is the first of a publication series dealing with innovative recommendations and aspects of the program.

  6. Comparison of linear, mixed integer and non-linear programming methods in energy system dispatch modelling

    DEFF Research Database (Denmark)

    Ommen, Torben Schmidt; Markussen, Wiebke Brix; Elmegaard, Brian

    2014-01-01

    In the paper, three frequently used operation optimisation methods are examined with respect to their impact on operation management of the combined utility technologies for electric power and DH (district heating) of eastern Denmark. The investigation focusses on individual plant operation...... differences and differences between the solution found by each optimisation method. One of the investigated approaches utilises LP (linear programming) for optimisation, one uses LP with binary operation constraints, while the third approach uses NLP (non-linear programming). The LP model is used...... as a benchmark, as this type is frequently used, and has the lowest amount of constraints of the three. A comparison of the optimised operation of a number of units shows significant differences between the three methods. Compared to the reference, the use of binary integer variables, increases operation...

  7. PROGRAMMING OF METHODS FOR THE NEEDS OF LOGISTICS DISTRIBUTION SOLVING PROBLEMS

    Directory of Open Access Journals (Sweden)

    Andrea Štangová

    2014-06-01

    Full Text Available Logistics has become one of the dominant factors which is affecting the successful management, competitiveness and mentality of the global economy. Distribution logistics materializes the connesciton of production and consumer marke. It uses different methodology and methods of multicriterial evaluation and allocation. This thesis adresses the problem of the costs of securing the distribution of product. It was therefore relevant to design a software product thet would be helpful in solvin the problems related to distribution logistics. Elodis – electronic distribution logistics program was designed on the basis of theoretical analysis of the issue of distribution logistics and on the analysis of the software products market. The program uses a multicriterial evaluation methods to deremine the appropriate type and mathematical and geometrical method to determine an appropriate allocation of the distribution center, warehouse and company.

  8. Effect of a base-catalyzed dechlorination process on the genotoxicity of PCB-contaminated soil

    Energy Technology Data Exchange (ETDEWEB)

    DeMarini, D.M.; Houk, V.S.; Kornel, A.; Rogers, C.J.

    1992-01-01

    We evaluated the genotoxicity of dichloromethane (DCM) extracts of PCB-contaminated soil before and after the soil had been treated by a base-catalyzed dechlorination process, which involved heating a mixture of the soil, polyethylene glycol, and sodium hydroxide to 250-350 C. This dechlorination process reduced by over 99% the PCB concentration in the soil, which was initially 2,200 ppm. The DCM extracts of both control and treated soils were not mutagenic in strain TA100 of Salmonella, but they were mutagenic in strain TA98. The base-catalyzed dechlorination process reduced the mutagenic potency of the soil by approximately one-half. The DCM extracts of the soils before and after treatment were equally genotoxic in a prophage-induction assay in E. coli, which detects some chlorinated organic carcinogens that were not detected by the Salmonella mutagenicity assay. These results show that treatment of PCB-contaminated soil by this base-catalyzed dechlorination process did not increase the genotoxicity of the soil.

  9. Simultaneous electrodialytic removal of PAH, PCB, TBT and heavy metals from sediments.

    Science.gov (United States)

    Pedersen, Kristine B; Lejon, Tore; Jensen, Pernille E; Ottosen, Lisbeth M

    2017-08-01

    Contaminated sediments are remediated in order to protect human health and the environment, with the additional benefit of using the treated sediments for other activities. Common for many polluted sediments is the contamination with several different pollutants, making remediation challenging with the need of different remedial actions for each pollutant. In this study, electrodialytic remediation (EDR) of sediments was found effective for simultaneous removal of heavy metals and organic pollutants for sediments from Arctic regions - Sisimiut in Greenland and Hammerfest in Norway. The influence of sediment properties and experimental settings on the remediation process was studied by employing multivariate analysis. The importance of the variables studied varied with the pollutant and based on these results it was possible to assess removal processes for the different pollutants. Desorption was found to be important for the removal of heavy metals and TBT, while photolysis was significant for removal of PAH, PCB and TBT. In addition, dechlorination was found to be important for the removal of PCB. The highest removal efficiencies were found for heavy metals, TBT and PCB (>40%) and lower removal efficiencies for PAH (<35%). Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Atmospheric PCDD/F and PCB levels implicated by pine (Cedrus deodara) needles at Dalian, China

    International Nuclear Information System (INIS)

    Chen Jingwen; Zhao Huimin; Gao Lina; Henkelmann, Bernhard; Schramm, Karl-Werner

    2006-01-01

    Dalian is a seaside city situated in the northeastern monsoon area of China. For the first time, levels of PCDD/F and PCB congeners in pine (Cedrus deodara) needles of Dalian urban areas were investigated. Two sampling campaigns with 17 sampling points were performed in 2002. The summation of tetra- to octachlorinated PCDD/Fs and summation of 209 PCB congeners in Dalian pine needles averaged 127 ± 40 ng/kg (dry) and 4389 ± 1575 ng/kg (dry), respectively. Average toxic equivalence (TEQ) for PCDD/Fs and PCBs are 2.1 and 0.4 ng/kg (dry), respectively. The pine needles can differentiate spatial variation of the pollutants. The PCDD/F and PCB levels in Dalian pine needles are low or comparable with other international regions that were not impacted by evident point sources. The data can serve as a base for long-term spatial and temporal studies of PCDD/Fs and PCBs in China. - Levels of PCDD/Fs and PCBs in pine needles sampled from Dalian, China, were investigated for the first time

  11. Optimization of Cvd Diamond Coating Type on Micro Drills in Pcb Machining

    Science.gov (United States)

    Lei, X. L.; He, Y.; Sun, F. H.

    2016-12-01

    The demand for better tools for machining printed circuit boards (PCBs) is increasing due to the extensive usage of these boards in digital electronic products. This paper is aimed at optimizing coating type on micro drills in order to extend their lifetime in PCB machining. First, the tribotests involving micro crystalline diamond (MCD), nano crystalline diamond (NCD) and bare tungsten carbide (WC-Co) against PCBs show that NCD-PCB tribopair exhibits the lowest friction coefficient (0.35) due to the unique nano structure and low surface roughness of NCD films. Thereafter, the dry machining performance of the MCD- and NCD-coated micro drills on PCBs is systematically studied, using diamond-like coating (DLC) and TiAlN-coated micro drills as comparison. The experiments show that the working lives of these micro drills can be ranked as: NCD>TiAlN>DLC>MCD>bare WC-Co. The superior cutting performance of NCD-coated micro drills in terms of the lowest flank wear growth rate, no tool degradation (e.g. chipping, tool tipping) appearance, the best hole quality as well as the lowest feed force may come from the excellent wear resistance, lower friction coefficient against PCB as well as the high adhesive strength on the underneath substrate of NCD films.

  12. Integrative demographic modeling reveals population level impacts of PCB toxicity to juvenile snapping turtles

    International Nuclear Information System (INIS)

    Salice, Christopher J.; Rowe, Christopher L.; Eisenreich, Karen M.

    2014-01-01

    A significant challenge in ecotoxicology and risk assessment lies in placing observed contaminant effects in a meaningful ecological context. Polychlorinated biphenyls (PCBs) have been shown to affect juvenile snapping turtle survival and growth but the ecological significance of these effects is difficult to discern without a formal, population-level assessment. We used a demographic matrix model to explore the potential population-level effects of PCBs on turtles. Our model showed that effects of PCBs on juvenile survival, growth and size at hatching could translate to negative effects at the population level despite the fact that these life cycle components do not typically contribute strongly to population level processes. This research points to the utility of using integrative demographic modeling approaches to better understand contaminant effects in wildlife. The results indicate that population-level effects are only evident after several years, suggesting that for long-lived species, detecting adverse contaminant effects could prove challenging. -- Highlights: • Previous studies have shown the PCBs can impact juvenile snapping turtles. • We used a demographic model of turtles to evaluate population-level PCB effects. • PCB effects on turtles may translate to negative population responses. • Long-term monitoring is needed to detect contaminant effects on natural turtle populations. • Demographic models can improve our understanding contaminant ecotoxicity. -- A demographic model was used to show that PCB induced effects on young snapping turtles can result in adverse effects at the population level

  13. Histopathology of feral fish from a PCB-contaminated freshwater lake

    Energy Technology Data Exchange (ETDEWEB)

    Koponen, Kari; Ritola, Ossi; Huuskonen, Sirpa E.; Lindstroem-Seppae, Pirjo [Univ. of Kuopio (Finland). Dept. of Physiology; Myers, Mark S. [National Oceanic and Atmospheric Administration, Seattle, WA (United States). National Marine Fisheries Service

    2001-05-01

    The purpose of this study was to evaluate the potential toxic effects of chronic sublethal polychlorinated biphenyl (PCB) exposure on feral fish, using histopathology as an endpoint. Histopathological study of bream (Abramis brama) and asp (Aspius aspius) living in a PCB-polluted freshwater lake revealed abnormal cellular changes in the renal corpuscle of both species. Dilation of glomerular capillaries (DGC), mesangial edema (ME), an adhesion between visceral and parietal layers of Bowman's capsule (ABC), and filling of Bowman's space (FBS), were highly prevalent features in lake fish. The prevalence of each of these lesions was significantly lower, or totally absent in fish caught from reference locations. Cellular alterations in liver, gill, gonads, spleen, and intestine were all linked to seasonal changes. The results suggest that some of the observed histopathological changes in renal glomeruli, particularly DGC and ME, could possibly indicate a prolonged chemical stress caused by PCBs and related compounds. It is also possible that chronic PCB exposure may have suppressed and weakened the immuno systems of exposed fish making them more vulnerable to secondary parasitic infection.

  14. A brief overview of NASA Langley's research program in formal methods

    Science.gov (United States)

    1992-01-01

    An overview of NASA Langley's research program in formal methods is presented. The major goal of this work is to bring formal methods technology to a sufficiently mature level for use by the United States aerospace industry. Towards this goal, work is underway to design and formally verify a fault-tolerant computing platform suitable for advanced flight control applications. Also, several direct technology transfer efforts have been initiated that apply formal methods to critical subsystems of real aerospace computer systems. The research team consists of six NASA civil servants and contractors from Boeing Military Aircraft Company, Computational Logic Inc., Odyssey Research Associates, SRI International, University of California at Davis, and Vigyan Inc.

  15. A Multiobjective Programming Method for Ranking All Units Based on Compensatory DEA Model

    Directory of Open Access Journals (Sweden)

    Haifang Cheng

    2014-01-01

    Full Text Available In order to rank all decision making units (DMUs on the same basis, this paper proposes a multiobjective programming (MOP model based on a compensatory data envelopment analysis (DEA model to derive a common set of weights that can be used for the full ranking of all DMUs. We first revisit a compensatory DEA model for ranking all units, point out the existing problem for solving the model, and present an improved algorithm for which an approximate global optimal solution of the model can be obtained by solving a sequence of linear programming. Then, we applied the key idea of the compensatory DEA model to develop the MOP model in which the objectives are to simultaneously maximize all common weights under constraints that the sum of efficiency values of all DMUs is equal to unity and the sum of all common weights is also equal to unity. In order to solve the MOP model, we transform it into a single objective programming (SOP model using a fuzzy programming method and solve the SOP model using the proposed approximation algorithm. To illustrate the ranking method using the proposed method, two numerical examples are solved.

  16. A practical, cost-effective method for recruiting people into healthy eating behavior programs.

    Science.gov (United States)

    McDonald, Paul W

    2007-04-01

    The population impact of programs designed to develop healthy eating behaviors is limited by the number of people who use them. Most public health providers and researchers rely on purchased mass media, which can be expensive, on public service announcements, or clinic-based recruitment, which can have limited reach. Few studies offer assistance for selecting high-outreach and low-cost strategies to promote healthy eating programs. The purpose of this study was 1) to determine whether classified newspaper advertising is an effective and efficient method of recruiting participants into a healthy eating program and 2) to determine whether segmenting messages by transtheoretical stage of change would help engage individuals at all levels of motivation to change their eating behavior. For 5 days in 1997, three advertisements corresponding to different stages of change were placed in a Canadian newspaper with a daily circulation of 75,000. There were 282 eligible people who responded to newspaper advertisements, and the cost was Can $1.11 (U.S. $0.72) per recruit. This cost compares favorably with the cost efficiency of mass media, direct mail, and other common promotional methods. Message type was correlated with respondent's stage of change, and this correlation suggested that attempts to send different messages to different audience segments were successful. Classified advertisements appear to be a highly cost-efficient method for recruiting a diverse range of participants into healthy eating programs and research about healthy eating.

  17. A two-stage inexact joint-probabilistic programming method for air quality management under uncertainty.

    Science.gov (United States)

    Lv, Y; Huang, G H; Li, Y P; Yang, Z F; Sun, W

    2011-03-01

    A two-stage inexact joint-probabilistic programming (TIJP) method is developed for planning a regional air quality management system with multiple pollutants and multiple sources. The TIJP method incorporates the techniques of two-stage stochastic programming, joint-probabilistic constraint programming and interval mathematical programming, where uncertainties expressed as probability distributions and interval values can be addressed. Moreover, it can not only examine the risk of violating joint-probability constraints, but also account for economic penalties as corrective measures against any infeasibility. The developed TIJP method is applied to a case study of a regional air pollution control problem, where the air quality index (AQI) is introduced for evaluation of the integrated air quality management system associated with multiple pollutants. The joint-probability exists in the environmental constraints for AQI, such that individual probabilistic constraints for each pollutant can be efficiently incorporated within the TIJP model. The results indicate that useful solutions for air quality management practices have been generated; they can help decision makers to identify desired pollution abatement strategies with minimized system cost and maximized environmental efficiency. Copyright © 2010 Elsevier Ltd. All rights reserved.

  18. Bystander programs addressing sexual violence on college campuses: A systematic review and meta-analysis of program outcomes and delivery methods.

    Science.gov (United States)

    Jouriles, Ernest N; Krauss, Alison; Vu, Nicole L; Banyard, Victoria L; McDonald, Renee

    2018-02-06

    This systematic review and meta-analysis evaluates the effectiveness of bystander programs that address sexual violence on college campuses. Program effects on student attitudes/beliefs and bystander behavior were examined. Durability of program outcomes and the influence of program-delivery methods (e.g., facilitator-led programs vs. video, online or poster campaign programs) and program-parameters (e.g., program length) were also evaluated. Twenty-four studies met criteria for inclusion in the meta-analysis, and 207 separate results from these studies were coded. Students who participated in a bystander program, compared to those who had not, had more pro-social attitudes/beliefs about sexual violence and intervening to prevent it, and engaged in more bystander behavior. Program effects diminished over time, but meaningful changes persisted for at least three months following program delivery. Longer programs had greater effects than shorter programs on attitudes/beliefs. Bystander programs can be a valuable addition to colleges' violence prevention efforts.

  19. Method for solving fully fuzzy linear programming problems using deviation degree measure

    Institute of Scientific and Technical Information of China (English)

    Haifang Cheng; Weilai Huang; Jianhu Cai

    2013-01-01

    A new ful y fuzzy linear programming (FFLP) prob-lem with fuzzy equality constraints is discussed. Using deviation degree measures, the FFLP problem is transformed into a crispδ-parametric linear programming (LP) problem. Giving the value of deviation degree in each constraint, the δ-fuzzy optimal so-lution of the FFLP problem can be obtained by solving this LP problem. An algorithm is also proposed to find a balance-fuzzy optimal solution between two goals in conflict: to improve the va-lues of the objective function and to decrease the values of the deviation degrees. A numerical example is solved to il ustrate the proposed method.

  20. Adopting an Evidence-Based Lifestyle Physical Activity Program: Dissemination Study Design and Methods.

    Science.gov (United States)

    Dunn, Andrea L; Buller, David B; Dearing, James W; Cutter, Gary; Guerra, Michele; Wilcox, Sara; Bettinghaus, Erwin P

    2012-06-01

    BACKGROUND: There is a scarcity of research studies that have examined academic-commercial partnerships to disseminate evidence-based physical activity programs. Understanding this approach to dissemination is essential because academic-commercial partnerships are increasingly common. Private companies have used dissemination channels and strategies to a degree that academicians have not, and declining resources require academicians to explore these partnerships. PURPOSE: This paper describes a retrospective case-control study design including the methods, demographics, organizational decision-making, implementation rates, and marketing strategy for Active Living Every Day (ALED), an evidence-based lifestyle physical activity program that has been commercially available since 2001. Evidence-based public health promotion programs rely on organizations and targeted sectors to disseminate these programs although relatively little is known about organizational-level and sector-level influences that lead to their adoption and implementation. METHODS: Cases (n=154) were eligible if they had signed an ALED license agreement with Human Kinetics (HK), publisher of the program's textbooks and facilitator manuals, between 2001 and 2008. Two types of controls were matched (2:2:1) and stratified by sector and region. Active controls (Control 1; n=319) were organizations that contacted HK to consider adopting ALED. Passive controls (Control 2; n=328) were organizations that received unsolicited marketing materials and did not initiate contact with HK. We used Diffusion of Innovations Theory (DIT) constructs as the basis for developing the survey of cases and controls. RESULTS: Using the multi-method strategy recommended by Dillman, a total of n=801 cases and controls were surveyed. Most organizations were from the fitness sector followed by medical, nongovernmental, governmental, educational, worksite and other sectors with significantly higher response rates from government

  1. The method and program system CABEI for adjusting consistency between natural element and its isotopes data

    Energy Technology Data Exchange (ETDEWEB)

    Tingjin, Liu; Zhengjun, Sun [Chinese Nuclear Data Center, Beijing, BJ (China)

    1996-06-01

    To meet the requirement of nuclear engineering, especially nuclear fusion reactor, now the data in the major evaluated libraries are given not only for natural element but also for its isotopes. Inconsistency between element and its isotopes data is one of the main problem in present evaluated neutron libraries. The formulas for adjusting to satisfy simultaneously the two kinds of consistent relationships were derived by means of least square method, the program system CABEI were developed. This program was tested by calculating the Fe data in CENDL-2.1. The results show that adjusted values satisfy the two kinds of consistent relationships.

  2. Practical method for generation expansion planning based on the dynamic programming. Dynamic programming ni motozuku dengen keikaku shuho

    Energy Technology Data Exchange (ETDEWEB)

    Tanabe, R.; Yasuda, K.; Yokoyama, R. (Tokyo Metropolitan Univ., Tokyo (Japan))

    1992-05-20

    To supply cheap, high-reliable and a planty of the electricity is an important task of the electric supply system because the requirement for the electricity is rapidly increased in Japan. In order to solve this problem, the authors of the paper are developing a most suitable practical method based on algorithm, according to which the generation expansion planning is divided into two problems: the optimal generation mix and the optimal generation construction process and the two problems are solved respectively. But there are some bad points in the method, for example, there are only approximative practical restriction of the capacity of single machine and the existing electric supply etc., because the optimal generation mix is determined on the basis of non-linear planning. So, in the present paper, the electric supply support system is practically constructed while proposing an unified generation expansion planning based on the dynamic programming that is possible to consider these restrictions strictly and the usefullness of the method is inspected. 12 refs., 7 figs., 5 tabs.

  3. A study on PCB, PCDD/PCDF industrial contamination in an urban/agricultural area. Part I - Soil

    Energy Technology Data Exchange (ETDEWEB)

    Turrio-Baldassarri, L.; Alivernini, S.; Battistelli, C.L. [Istituto Superiore di Sanita, Rome (IT)] (and others)

    2004-09-15

    The Istituto Superiore di Sanita is involved in a study on the impact of existing and past industrial activities as possible sources of contamination on the surrounding environment. The study will focus on an industrial plant inside Brescia, a city in the north-west of Italy, where, from 1938 to 1984, 150 tons of polychlorinated biphenyls (PCBs) were produced. In 1994, 1996 and 1998 three monitoring programs, preliminary to the construction of a municipal waste incinerator near the industrial plant, were carried out. High PCBs levels in soils were observed, namely 3000-6000 fold higher than the limits (0,001mg/Kg) allowed by the 1999 Italian law, in an agricultural area where several small farms are located; the farmers have been consuming for a long time food, such as milk and meat, produced in their own farms. This study has different aims: confirming and enriching previous data; helping determining the contamination source; measuring the contamination of the animals living in the area or fed with contaminated forage; evaluate the exposure of the farmers as compared to general population. Moreover, this study is interested in studying the PCB and PCDD/PCDF transfer from soils to humans across the food chain.

  4. JAC, 2-D Finite Element Method Program for Quasi Static Mechanics Problems by Nonlinear Conjugate Gradient (CG) Method

    International Nuclear Information System (INIS)

    Biffle, J.H.

    1991-01-01

    1 - Description of program or function: JAC is a two-dimensional finite element program for solving large deformation, temperature dependent, quasi-static mechanics problems with the nonlinear conjugate gradient (CG) technique. Either plane strain or axisymmetric geometry may be used with material descriptions which include temperature dependent elastic-plastic, temperature dependent secondary creep, and isothermal soil models. The nonlinear effects examined include material and geometric nonlinearities due to large rotations, large strains, and surface which slide relative to one another. JAC is vectorized to perform efficiently on the Cray1 computer. A restart capability is included. 2 - Method of solution: The nonlinear conjugate gradient method is employed in a two-dimensional plane strain or axisymmetric setting with various techniques for accelerating convergence. Sliding interface conditions are also implemented. A four-node Lagrangian uniform strain element is used with orthogonal hourglass viscosity to control the zero energy modes. Three sets of continuum equations are needed - kinematic statements, constitutive equations, and equations of equilibrium - to describe the deformed configuration of the body. 3 - Restrictions on the complexity of the problem - Maxima of: 10 load and solution control functions, 4 materials. The strain rate is assumed constant over a time interval. Current large rotation theory is applicable to a maximum shear strain of 1.0. JAC should be used with caution for large shear strains. Problem size is limited only by available memory

  5. cp-R, an interface the R programming language for clinical laboratory method comparisons.

    Science.gov (United States)

    Holmes, Daniel T

    2015-02-01

    Clinical scientists frequently need to compare two different bioanalytical methods as part of assay validation/monitoring. As a matter necessity, regression methods for quantitative comparison in clinical chemistry, hematology and other clinical laboratory disciplines must allow for error in both the x and y variables. Traditionally the methods popularized by 1) Deming and 2) Passing and Bablok have been recommended. While commercial tools exist, no simple open source tool is available. The purpose of this work was to develop and entirely open-source GUI-driven program for bioanalytical method comparisons capable of performing these regression methods and able to produce highly customized graphical output. The GUI is written in python and PyQt4 with R scripts performing regression and graphical functions. The program can be run from source code or as a pre-compiled binary executable. The software performs three forms of regression and offers weighting where applicable. Confidence bands of the regression are calculated using bootstrapping for Deming and Passing Bablok methods. Users can customize regression plots according to the tools available in R and can produced output in any of: jpg, png, tiff, bmp at any desired resolution or ps and pdf vector formats. Bland Altman plots and some regression diagnostic plots are also generated. Correctness of regression parameter estimates was confirmed against existing R packages. The program allows for rapid and highly customizable graphical output capable of conforming to the publication requirements of any clinical chemistry journal. Quick method comparisons can also be performed and cut and paste into spreadsheet or word processing applications. We present a simple and intuitive open source tool for quantitative method comparison in a clinical laboratory environment. Copyright © 2014 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

  6. Comment on linking the sex difference in PCB concentrations of fish to release of eggs at spawning: Time to jettison the dogma

    Science.gov (United States)

    Madenjian, Charles P.

    2017-01-01

    For the past 20 years or so, a commonly used explanation in the scientific literature for higher polychlorinated biphenyl (PCB) concentrations in male fish than in female fish has been that females lose a high proportion of their PCB body burden by releasing eggs at spawning time, and therefore the females undergo a substantial decrease in their PCB concentration immediately after spawning due to shedding of their eggs [1]. Indeed, this explanation can be viewed as the conventional wisdom used by toxicologists to account for differences in PCB concentrations between the sexes of fish. On the surface, this explanation seems plausible. PCBs are lipid soluble, and eggs are thought to be relatively high in lipid concentration. If a sufficiently high proportion of the PCB body burden within a female fish is transferred to the eggs, then the release of eggs at spawning would be expected to result in a dramatic decrease in the PCB concentration of the female.

  7. Accumulation of dioxins and PCB in house fly larvae (musca domestica) reared in poultry manure and used in feed for organic laying hens

    DEFF Research Database (Denmark)

    Nordentoft, Steen; Cederberg, Tommy Licht; Fischer, Christian Holst

    2014-01-01

    higher content of the persistent organic environmental contaminants dioxins and PCB than eggs from conventional hens held indoor in cages. 1,2 The elevated levels of dioxins and PCB are most likely due to the hens picking in soils contaminated by industrial activities, burning of waste, chemical spillage...... etc. As manure from free range hens is expected to have elevated contents of dioxins and PCB, we investigated whether larvae reared in this type of manure accumulate dioxins and PCB, and if feeding organic laying hens with these larvae would increase the levels of dioxins and PCB in the hen eggs...... larvae, poultry manure, compost and compound feed as well as pooled egg samples from each group were analysed for levels of dioxins and PCB. Analytical procedure: after extraction of the sample with a mixture of pentane and acetone (88:12), the extracts were cleaned-up on a multilayer silica column...

  8. Safer Roads: Comparisons Between Road Assessment Program and Composite Road Safety Index Method

    Directory of Open Access Journals (Sweden)

    Mohd Razelan Intan Suhana

    2017-01-01

    Full Text Available In most countries, crash statistics have becoming very crucial in evaluating road’s safety level. In Malaysia, these data are very important in deciding crash-prone areas known as black spot where specific road improvements plan will be proposed. However due to the unavailability of reliable crash data in many developing countries, appropriate road maintenance measures are facing great troubles. In light of that, several proactive methods in defining road’s safety level such as Road Assessment Program (RAP have emerged. This research aim to compare two proactive methods that have been tested in Malaysian roads ; road assessment program and road environment risk index which was developed based on composite index theory in defining road’s safety level. Composite road environment risk index was combining several crucial environment indicators, assigning weight and aggregating the individual index together to form a single value representing the road’s safety level. Based on the results, it can be concluded that both road assessment program and composite road environment risk index are contradicted in six different ways such as type of speed used, type of analysis used and their final outcomes. However, with an aim to promote safer roads, these two methods can be used concurrently as the outcomes in both methods seems to fulfil each other’s gap very well.

  9. A Genetic Programming Method for the Identification of Signal Peptides and Prediction of Their Cleavage Sites

    Directory of Open Access Journals (Sweden)

    David Lennartsson

    2004-01-01

    Full Text Available A novel approach to signal peptide identification is presented. We use an evolutionary algorithm for automatic evolution of classification programs, so-called programmatic motifs. The variant of evolutionary algorithm used is called genetic programming where a population of solution candidates in the form of full computer programs is evolved, based on training examples consisting of signal peptide sequences. The method is compared with a previous work using artificial neural network (ANN approaches. Some advantages compared to ANNs are noted. The programmatic motif can perform computational tasks beyond that of feed-forward neural networks and has also other advantages such as readability. The best motif evolved was analyzed and shown to detect the h-region of the signal peptide. A powerful parallel computer cluster was used for the experiment.

  10. The Usefulness of Appreciative Inquiry As a Method to Identify Mass Sports Program Success

    Directory of Open Access Journals (Sweden)

    Bernadine VAN GRAMBERG

    2010-06-01

    Full Text Available The importance of the relationship between good health and physical activity is well known. Despite the growth of public mass sports programs in many countries, few evaluate them to ensure they meet their targets. Measuring organizational effectiveness and program success in public sports organizations is difficult and cannot be done directly as it involves a number of complex dimensions involving both internal (organizational and external (customer factors. Recognizing this, the paper advances the Appreciative Inquiry approach as a culturally sensitive method to focus on the positives of human experience rather than finding faults or gaps and as a means of identifying the success factors of service delivery. The paper outlines the research strategy to investigate success in Malaysian mass sport programs.

  11. Finite element method programs to analyze irradiation behavior of fuel pellets

    International Nuclear Information System (INIS)

    Yamada, Rayji; Harayama, Yasuo; Ishibashi, Akihiro; Ono, Masao.

    1979-09-01

    For the safety assessment of reactor fuel, it is important to grasp local changes of fuel pins due to irradiation in a reactor. Such changes of fuel result mostly from irradiation of fuel pellets. Elasto-plastic analysis programs based on the finite element method were developed to analyze these local changes. In the programs, emphasis is placed on the analysis of cracks in pellets; the interaction between cracked-pellets and cladding is not taken into consideration. The two programs developed are FEMF3 based on a two-dimensional axially symmetric model (r-z system) and FREB4 on a two-dimensional plane model (r-theta system). It is discussed in this report how the occurrence and distribution of cracks depend on heat rate of the fuel pin. (author)

  12. Java Programs for Using Newmark's Method and Simplified Decoupled Analysis to Model Slope Performance During Earthquakes

    Science.gov (United States)

    Jibson, Randall W.; Jibson, Matthew W.

    2003-01-01

    Landslides typically cause a large proportion of earthquake damage, and the ability to predict slope performance during earthquakes is important for many types of seismic-hazard analysis and for the design of engineered slopes. Newmark's method for modeling a landslide as a rigid-plastic block sliding on an inclined plane provides a useful method for predicting approximate landslide displacements. Newmark's method estimates the displacement of a potential landslide block as it is subjected to earthquake shaking from a specific strong-motion record (earthquake acceleration-time history). A modification of Newmark's method, decoupled analysis, allows modeling landslides that are not assumed to be rigid blocks. This open-file report is available on CD-ROM and contains Java programs intended to facilitate performing both rigorous and simplified Newmark sliding-block analysis and a simplified model of decoupled analysis. For rigorous analysis, 2160 strong-motion records from 29 earthquakes are included along with a search interface for selecting records based on a wide variety of record properties. Utilities are available that allow users to add their own records to the program and use them for conducting Newmark analyses. Also included is a document containing detailed information about how to use Newmark's method to model dynamic slope performance. This program will run on any platform that supports the Java Runtime Environment (JRE) version 1.3, including Windows, Mac OSX, Linux, Solaris, etc. A minimum of 64 MB of available RAM is needed, and the fully installed program requires 400 MB of disk space.

  13. An influence function method based subsidence prediction program for longwall mining operations in inclined coal seams

    Energy Technology Data Exchange (ETDEWEB)

    Yi Luo; Jian-wei Cheng [West Virginia University, Morgantown, WV (United States). Department of Mining Engineering

    2009-09-15

    The distribution of the final surface subsidence basin induced by longwall operations in inclined coal seam could be significantly different from that in flat coal seam and demands special prediction methods. Though many empirical prediction methods have been developed, these methods are inflexible for varying geological and mining conditions. An influence function method has been developed to take the advantage of its fundamentally sound nature and flexibility. In developing this method, significant modifications have been made to the original Knothe function to produce an asymmetrical influence function. The empirical equations for final subsidence parameters derived from US subsidence data and Chinese empirical values have been incorporated into the mathematical models to improve the prediction accuracy. A corresponding computer program is developed. A number of subsidence cases for longwall mining operations in coal seams with varying inclination angles have been used to demonstrate the applicability of the developed subsidence prediction model. 9 refs., 8 figs.

  14. Implementation of visual programming methods for numerical techniques used in electromagnetic field theory

    Directory of Open Access Journals (Sweden)

    Metin Varan

    2017-08-01

    Full Text Available Field theory is one of the two sub-field theories in electrical and electronics engineering that for creates difficulties for undergraduate students. In undergraduate period, field theory has been taught under the theory of electromagnetic fields by which describes using partial differential equations and integral methods. Analytical methods for solution of field problems on the basis of a mathematical model may result the understanding difficulties for undergraduate students due to their mathematical and physical infrastructure. The analytical methods which can be applied in simple model lose their applicability to more complex models. In this case, the numerical methods are used to solve more complex equations. In this study, by preparing some field theory‘s web-based graphical user interface numerical methods of applications it has been aimed to increase learning levels of field theory problems for undergraduate and graduate students while taking in mind their computer programming capabilities.

  15. BOOK REVIEW: Advanced Topics in Computational Partial Differential Equations: Numerical Methods and Diffpack Programming

    Science.gov (United States)

    Katsaounis, T. D.

    2005-02-01

    The scope of this book is to present well known simple and advanced numerical methods for solving partial differential equations (PDEs) and how to implement these methods using the programming environment of the software package Diffpack. A basic background in PDEs and numerical methods is required by the potential reader. Further, a basic knowledge of the finite element method and its implementation in one and two space dimensions is required. The authors claim that no prior knowledge of the package Diffpack is required, which is true, but the reader should be at least familiar with an object oriented programming language like C++ in order to better comprehend the programming environment of Diffpack. Certainly, a prior knowledge or usage of Diffpack would be a great advantage to the reader. The book consists of 15 chapters, each one written by one or more authors. Each chapter is basically divided into two parts: the first part is about mathematical models described by PDEs and numerical methods to solve these models and the second part describes how to implement the numerical methods using the programming environment of Diffpack. Each chapter closes with a list of references on its subject. The first nine chapters cover well known numerical methods for solving the basic types of PDEs. Further, programming techniques on the serial as well as on the parallel implementation of numerical methods are also included in these chapters. The last five chapters are dedicated to applications, modelled by PDEs, in a variety of fields. The first chapter is an introduction to parallel processing. It covers fundamentals of parallel processing in a simple and concrete way and no prior knowledge of the subject is required. Examples of parallel implementation of basic linear algebra operations are presented using the Message Passing Interface (MPI) programming environment. Here, some knowledge of MPI routines is required by the reader. Examples solving in parallel simple PDEs using

  16. Mehar Methods for Fuzzy Optimal Solution and Sensitivity Analysis of Fuzzy Linear Programming with Symmetric Trapezoidal Fuzzy Numbers

    Directory of Open Access Journals (Sweden)

    Sukhpreet Kaur Sidhu

    2014-01-01

    Full Text Available The drawbacks of the existing methods to obtain the fuzzy optimal solution of such linear programming problems, in which coefficients of the constraints are represented by real numbers and all the other parameters as well as variables are represented by symmetric trapezoidal fuzzy numbers, are pointed out, and to resolve these drawbacks, a new method (named as Mehar method is proposed for the same linear programming problems. Also, with the help of proposed Mehar method, a new method, much easy as compared to the existing methods, is proposed to deal with the sensitivity analysis of the same type of linear programming problems.

  17. Effects of thiol antioxidants on the atropselective oxidation of 2,2',3,3',6,6'-hexachlorobiphenyl (PCB 136) by rat liver microsomes.

    Science.gov (United States)

    Wu, Xianai; Lehmler, Hans-Joachim

    2016-02-01

    Chiral polychlorinated biphenyl (PCB) congeners, such as PCB 136, are atropselectively metabolized to various hydroxylated PCB metabolites (HO-PCBs). The present study investigates the effect of two thiol antioxidants, glutathione and N-acetyl-cysteine (NAC), on profiles and chiral signatures of PCB 136 and its HO-PCB metabolites in rat liver microsomal incubations. Liver microsomes prepared from rats pretreated with phenobarbital were incubated with PCB 136 (5 μM) in the presence of the respective antioxidant (0-10 mM), and levels and chiral signatures of PCB 136 and its HO-PCB metabolites were determined. Three metabolites, 5-136 (2,2',3,3',6,6'-hexachlorobiphenyl-5-ol), 4-136 (2,2',3,3',6,6'-hexachlorobiphenyl-4-ol), and 4,5-136 (2,2',3,3',6,6'-hexachlorobiphenyl-4,5-diol), were detected in all incubations, with 5-136 being the major metabolite. Compared to microsomal incubations without antioxidant, levels of 4,5-136 increased with increasing antioxidant concentration, whereas levels of PCB 136 and both mono-HO-PCBs were not affected by the presence of either antioxidant. PCB 136, 4-136, and 5-136 displayed significant atropisomeric enrichment; however, the direction and extent of the atropisomeric enrichment was not altered in the presence of an antioxidant. Because 4,5-136 can either be conjugated to a sulfate or glucuronide metabolite that is readily excreted or further oxidized a potentially toxic PCB 136 quinone, the effect of both thiol antioxidants on 4,5-136 formation suggests that disruptions of glutathione homeostasis may alter the balance between both metabolic pathways and, thus, PCB 136 toxicity in vivo.

  18. Physiotherapists supporting self-management through health coaching: a mixed methods program evaluation.

    Science.gov (United States)

    Dufour, Sinéad Patricia; Graham, Shane; Friesen, Josh; Rosenblat, Michael; Rous, Colin; Richardson, Julie

    2015-01-01

    To evaluate a program in support of chronic disease self-management (CDSM) that is founded on a health coaching (HC) approach, includes supervised exercise and mindfulness-based stress reduction components and is delivered within a private practice physiotherapy setting. An explanatory mixed method design, framed by theory-based program evaluation, was employed to evaluate an eight-week group-based program. Standardized self-rated and performance measures were evaluated pre- and post intervention. Additionally, participant focus groups were conducted following the intervention period. An inductive thematic approach was undertaken to analyze the qualitative data. Seventeen participants (N = 17) completed the study. Improvements were seen in both self-report and performance outcomes. Participants explained how and why they felt the program was beneficial. Six themes were generated: (1) group dynamic; (2) learning versus doing; (3) holism and comprehensive care; (4) self-efficacy and empowerment; (5) previous solutions versus new management strategies; and (6) healthcare provider support. This study established that a group program in support of CDSM founded on a HC approach demonstrated potential value from participants as well as favorable outcomes. A pragmatic randomized control trial is required to determine efficacy of this intervention.

  19. Methods for evaluating educational programs: does Writing Center participation affect student achievement?

    Science.gov (United States)

    Bredtmann, Julia; Crede, Carsten J; Otten, Sebastian

    2013-02-01

    This paper evaluates the effectiveness of the introduction of a Writing Center at a university, which aims at improving students' scientific writing abilities. In order to deal with the presumed limited utility of student feedback surveys for evaluating the effectiveness of educational programs, we use students' actual learning outcomes as our quality measure. Based on this objective measure, different statistical evaluation methods established in the labor market treatment literature are applied. We present and discuss the validity of these methods to evaluate educational programs and compare the results of these approaches to implications obtained using corresponding student surveys. Although almost all students reported the writing courses to be helpful, we find no significant effect of course participation on students' grades. This result highlights the need for institutions not to rely solely on student course evaluations for evidence-based policy decisions. Copyright © 2012 Elsevier Ltd. All rights reserved.

  20. Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 18

    International Nuclear Information System (INIS)

    Pazsit, Imre; Nam, Tran Hoai; Dykin, Victor; Jonsson, Anders

    2013-01-01

    This report constitutes Stage 18 of a long-term research and development program concerning the development of diagnostics and monitoring methods for nuclear reactors. The objective of the research program is to contribute to the strategic research goal of competence and research capacity by building up competence within the Department of Nuclear Engineering at Chalmers University of Technology, regarding reactor physics, reactor dynamics and noise diagnostics. The purpose is also to contribute to the research goal of giving a basis for SSM's supervision by developing methods for identification and localization of perturbations in reactor cores. Results up to Stage 17 were reported in SKI and SSM reports, as listed in the report's summary