Full-length fuel rod behavior under severe accident conditions

International Nuclear Information System (INIS)

Lombardo, N.J.; Lanning, D.D.; Panisko, F.E.

1992-12-01

This document presents an assessment of the severe accident phenomena observed from four Full-Length High-Temperature (FLHT) tests that were performed by the Pacific Northwest Laboratory (PNL) in the National Research Universal (NRU) reactor at Chalk River, Ontario, Canada. These tests were conducted for the US Nuclear Regulatory Commission (NRC) as part of the Severe Accident Research Program. The objectives of the test were to simulate conditions and provide information on the behavior of full-length fuel rods during hypothetical, small-break, loss-of-coolant severe accidents, in commercial light water reactors

Commercial Video Programs: A Component to Enhance Language Skills.

Science.gov (United States)

Linares, H. A.

After the passage of a resolution by the South Dakota Board of Regents to place greater emphasis on the study of foreign language, Northern State College introduced commercial video programs in Spanish for classroom use. After installing a parabolic antenna and the other necessary equipment, the department selected and edited a series of programs,…

Balancing innovation with commercialization in NASA's Science Mission Directorate SBIR Program

Science.gov (United States)

Terrile, R. J.; Jackson, B. L.

The NASA Science Mission Directorate (SMD) administers a portion of the Small Business Innovative Research (SBIR) Program. One of the challenges of administrating this program is to balance the need to foster innovation in small businesses and the need to demonstrate commercialization by infusion into NASA. Because of the often risky nature of innovation, SBIR programs will tend to drift into a status that rewards proposals that promise to deliver a product that is exactly what was specified in the call. This often will satisfy the metric of providing a clear demonstration of infusion and thus also providing a publishable success story. However, another goal of the SBIR program is to foster innovation as a national asset. Even though data from commercially successful SMD SBIR tasks indicate a higher value for less innovative efforts, there are programmatic and national reasons to balance the program toward risking a portion of the portfolio on higher innovation tasks. Establishing this balance is made difficult because there is a reward metric for successful infusion and commercialization, but none for successful innovation. In general, the ultimate infusion and commercialization of innovative solutions has a lower probability than implementation of established ideas, but they can also have a much higher return on investment. If innovative ideas are valued and solicited in the SBIR program, then NASA technology requirements need to be specified in a way that defines the problem and possible solution, but will also allow for different approaches and unconventional methods. It may also be necessary to establish a guideline to risk a percentage of awards on these innovations.

77 FR 76825 - Energy Conservation Program: Certification of Commercial and Industrial HVAC, Refrigeration and...

Science.gov (United States)

2012-12-31

... Energy Conservation Program: Certification of Commercial and Industrial HVAC, Refrigeration and Water... provisions for commercial refrigeration equipment; commercial heating, ventilating, air-conditioning (HVAC...; commercial HVAC equipment; commercial WH equipment; and walk-in coolers and freezers (June 30 Final Rule). 76...

Violence in television commercials during nonviolent programming. The 1996 Major League Baseball playoffs.

Science.gov (United States)

Anderson, C

1997-10-01

To identify the frequency of violent television commercials aired during major league baseball playoffs, traditionally thought to be a family-oriented viewing time. All 6 World Series games televised on the Fox Television Network (Fox), all 5 American League Championship Series playoff games televised by the National Broadcasting Company (NBC), and 4 first-round playoff games televised by ESPN Sports Television Network (ESPN) were videotaped in October 1996. During the 15 televised games reviewed, 104 (6.8%) of the 1528 commercials contained violent content. Sixty-one commercials (10 per game) that included violent interactions were noted during the World Series, 30 (6 per game) during the American League Championship Series, and 13 (3 per game) during the 4 first-round playoff games for a total of 104. In these 104 violent commercials, 69 contained at least 1 violent act, 90 contained at least 1 violent threat, and 27 contained evidence of at least 1 violent consequence. Seventy (67.3%) of the violent commercials were promotions for television programs, 7 (6.7%) were cable television program advertisements, and 20 (19.2%) were big-screen movie promotions. Twenty (71.4%) of 28 big-screen movie promotions were violent. Twenty-two (21.2%) of the 104 violent commercials and 7 "nonviolent" commercials contained blood or other graphic content, all of which were televised during the Fox presentation of the World Series. Fox also accounted for all 24 violent commercials that used a knife. Guns were involved in 25 violent commercials on NBC (5.0 per game), in 20 on Fox (3.33 per game), and in 7 on ESPN (1.75 per game). Overt violent content in commercials during the 1996 major league playoffs was common and consisted mainly of promotions for television programs and big-screen movies. It is counterintuitive to find such commercials in nonviolent programming and makes it difficult for parents to avoid exposing their children to this form of violence.

The commercial vehicle information systems and networks program, 2013.

Science.gov (United States)

2015-04-01

The Commercial Vehicle Information Systems and Networks (CVISN) grant program supports the Federal Motor Carrier Safety Administrations (FMCSAs) safety mission by providing grant funds to States to: : Improve safety and productivity of moto...

Commercial technologies from the SP-100 program

International Nuclear Information System (INIS)

Truscello, V.C.; Fujita, T.; Mondt, J.F.

1995-01-01

For more than a decade, Jet Propulsion Labortory and Los Alamos have managed a multi-agency funded effort to develop a space reactor power system. This SP-100 Program has developed technologies required for space power systems that can be implemented in the industrial and commercial sectors to improve competitiveness in the global economy. Initial steps taken to transfer this technology from the laboratories to industrial and commercial entities within United States include: (1) identifying specific technologies having commercial potential; (2) distributing information describing the identified technologies and interacting with interested commercial and industrial entities to develop application-specific details and requirements; and (3) providing a technological data base that leads to transfer of technology or the forming of teaming arrangements to accomplish the transfer by tailoring the technology to meet application-specific requirements. SP-100 technologies having commercial potential encompass fabrication processes, devices, and components. Examples: a process for bonding refractory metals to graphite, a device to sense the position of an actuator and a component to enable rotating machines to operate without supplying lubrication (self-lubricating ball bearing). Shortly after the NASA Regional Technology Transfer Centers widely disseminated information covering SP-100 technologies, over one hundred expressions of interest were received, which indicate that there is a large potential benefit in transferring SP-100 technology. Interactions with industrial and commercial entities have identified a substantial need for creating teaming arrangements involving the interested entity and personnel from laboratories and their contractors, who have the knowledge and ability to tailor the technology to meet application-specific requirements. copyright 1995 American Institute of Physics

Recovery Act: Training Program Development for Commercial Building Equipment Technicians

Energy Technology Data Exchange (ETDEWEB)

Leah Glameyer

2012-07-12

The overall goal of this project has been to develop curricula, certification requirements, and accreditation standards for training on energy efficient practices and technologies for commercial building technicians. These training products will advance industry expertise towards net-zero energy commercial building goals and will result in a substantial reduction in energy use. The ultimate objective is to develop a workforce that can bring existing commercial buildings up to their energy performance potential and ensure that new commercial buildings do not fall below their expected optimal level of performance. Commercial building equipment technicians participating in this training program will learn how to best operate commercial buildings to ensure they reach their expected energy performance level. The training is a combination of classroom, online and on-site lessons. The Texas Engineering Extension Service (TEEX) developed curricula using subject matter and adult learning experts to ensure the training meets certification requirements and accreditation standards for training these technicians. The training targets a specific climate zone to meets the needs, specialized expertise, and perspectives of the commercial building equipment technicians in that zone. The combination of efficient operations and advanced design will improve the internal built environment of a commercial building by increasing comfort and safety, while reducing energy use and environmental impact. Properly trained technicians will ensure equipment operates at design specifications. A second impact is a more highly trained workforce that is better equipped to obtain employment. Organizations that contributed to the development of the training program include TEEX and the Texas Engineering Experiment Station (TEES) (both members of The Texas A&M University System). TEES is also a member of the Building Commissioning Association. This report includes a description of the project

78 FR 73589 - Energy Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric...

Science.gov (United States)

2013-12-06

... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors; Proposed... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors AGENCY... proposes energy conservation standards for a number of different groups of electric motors that DOE has not...

The Energy-Related Inventions Program: A decade of commercial progress

Energy Technology Data Exchange (ETDEWEB)

Brown, M.A.; Franchuk, C.A. (Oak Ridge National Lab., TN (United States)); Wilson, C.R. (Tennessee Univ., Knoxville, TN (United States))

1991-12-01

This report provides information on the recent commercial progress of inventions supported by the US Department of Energy's Energy-Related Inventions Programs (ERIP). It describes the results of the latest in a series of ERIP evaluation projects that have been completed since 1980. It focuses on the economic impacts of the program, notably sales and employment benefits. The period of interest is 1980 through 1990. The evaluation is based on data collected through mail and telephone surveying of 143 participants in the Program. As of October 1989, a total of 486 inventions were recommended to DOE by the National Institute for Standards and Technology, which screens all submitted inventions in terms of technical merit, potential for commercial success, and potential energy impact. By the end of 1990, at least 109 of these inventions had entered the market, generating total cumulative sales of more than $500 million. With $25.7 million in grants awarded from 1975 through 1990, and $63.1 million in program appropriations over the same period, ERIP has generated a 20:1 return in terms of sales values to grants, and an 8:1 return in sales versus program appropriations. It is estimated that 25% of all ERIP inventions had achieved sales by the end of 1990. While it is difficult to make exact comparisons between these percentages and other indicators of the success rates of technological innovations as a whole, the ERIP figures remain impressive. The commercial progress of spin-off technologies is also documented.

The Energy-Related Inventions Program: A decade of commercial progress

Energy Technology Data Exchange (ETDEWEB)

Brown, M.A.; Franchuk, C.A. [Oak Ridge National Lab., TN (United States); Wilson, C.R. [Tennessee Univ., Knoxville, TN (United States)

1991-12-01

This report provides information on the recent commercial progress of inventions supported by the US Department of Energy`s Energy-Related Inventions Programs (ERIP). It describes the results of the latest in a series of ERIP evaluation projects that have been completed since 1980. It focuses on the economic impacts of the program, notably sales and employment benefits. The period of interest is 1980 through 1990. The evaluation is based on data collected through mail and telephone surveying of 143 participants in the Program. As of October 1989, a total of 486 inventions were recommended to DOE by the National Institute for Standards and Technology, which screens all submitted inventions in terms of technical merit, potential for commercial success, and potential energy impact. By the end of 1990, at least 109 of these inventions had entered the market, generating total cumulative sales of more than $500 million. With $25.7 million in grants awarded from 1975 through 1990, and $63.1 million in program appropriations over the same period, ERIP has generated a 20:1 return in terms of sales values to grants, and an 8:1 return in sales versus program appropriations. It is estimated that 25% of all ERIP inventions had achieved sales by the end of 1990. While it is difficult to make exact comparisons between these percentages and other indicators of the success rates of technological innovations as a whole, the ERIP figures remain impressive. The commercial progress of spin-off technologies is also documented.

Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

Energy Technology Data Exchange (ETDEWEB)

none,

2011-09-01

This FY 2011 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

40 CFR 745.228 - Accreditation of training programs: public and commercial buildings, bridges and superstructures...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Accreditation of training programs: public and commercial buildings, bridges and superstructures. [Reserved] 745.228 Section 745.228... Accreditation of training programs: public and commercial buildings, bridges and superstructures. [Reserved] ...

Commercial Building Energy Asset Rating Program -- Market Research

Energy Technology Data Exchange (ETDEWEB)

McCabe, Molly J.; Wang, Na

2012-04-19

Under contract to Pacific Northwest National Laboratory, HaydenTanner, LLC conducted an in-depth analysis of the potential market value of a commercial building energy asset rating program for the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy. The market research objectives were to: (1) Evaluate market interest and need for a program and tool to offer asset rating and rapidly identify potential energy efficiency measures for the commercial building sector. (2) Identify key input variables and asset rating outputs that would facilitate increased investment in energy efficiency. (3) Assess best practices and lessons learned from existing national and international energy rating programs. (4) Identify core messaging to motivate owners, investors, financiers, and others in the real estate sector to adopt a voluntary asset rating program and, as a consequence, deploy high-performance strategies and technologies across new and existing buildings. (5) Identify leverage factors and incentives that facilitate increased investment in these buildings. To meet these objectives, work consisted of a review of the relevant literature, examination of existing and emergent asset and operational rating systems, interviews with industry stakeholders, and an evaluation of the value implication of an asset label on asset valuation. This report documents the analysis methodology and findings, conclusion, and recommendations. Its intent is to support and inform the DOE Office of Energy Efficiency and Renewable Energy on the market need and potential value impacts of an asset labeling and diagnostic tool to encourage high-performance new buildings and building efficiency retrofit projects.

Commercial Spacewalking: Designing an EVA Qualification Program for Space Tourism

Science.gov (United States)

Gast, Matthew A.

2010-01-01

In the near future, accessibility to space will be opened to anyone with the means and the desire to experience the weightlessness of microgravity, and to look out upon both the curvature of the Earth and the blackness of space, from the protected, shirt-sleeved environment of a commercial spacecraft. Initial forays will be short-duration, suborbital flights, but the experience and expertise of half a century of spaceflight will soon produce commercial vehicles capable of achieving low Earth orbit. Even with the commercial space industry still in its infancy, and manned orbital flight a number of years away, there is little doubt that there will one day be a feasible and viable market for those courageous enough to venture outside the vehicle and into the void, wearing nothing but a spacesuit, armed with nothing but preflight training. What that Extravehicular Activity (EVA) preflight training entails, however, is something that has yet to be defined. A number of significant factors will influence the composition of a commercial EVA training program, but a fundamental question remains: 'what minimum training guidelines must be met to ensure a safe and successful commercial spacewalk?' Utilizing the experience gained through the development of NASA's Skills program - designed to qualify NASA and International Partner astronauts for EVA aboard the International Space Station - this paper identifies the attributes and training objectives essential to the safe conduct of an EVA, and attempts to conceptually design a comprehensive training methodology meant to represent an acceptable qualification standard.

Pilot project for a commercial buildings Energy Analysis and Diagnostic Center (EADC) program. Final report

Energy Technology Data Exchange (ETDEWEB)

Capehart, B.L.

1996-02-01

Commercial energy use costs businesses around $70 billion annually. Many of these businesses are small and medium sized organizations that do not have the resources to help themselves, or to pay for professional engineering services to help reduce their energy costs and improve their economic competitiveness. Energy cost reduction actions with payback times of around two years could save the commercial sector 15--20%, or $10--$15 billion per year. This project was initially intended to evaluate the feasibility of performing commercial energy audits as an adjunct to the industrial audit program run by the US Department of Energy Industrial Office. This program is housed in 30 universities throughout the United States. Formerly known as Energy Analysis and Diagnostic Centers (EADC`s), the university programs are now called Industrial Assessment Centers (IAC`s) to reflect their expansion from energy use analyses to include waste and productivity analyses. The success of the EADC/IAC program in helping the manufacturing sector provides an excellent model for a similar program in the commercial buildings sector. This project has investigated using the EADC/IAC approach to performing energy audits for the commercial sector, and has determined that such an approach is feasible and cost effective.

The Evolution of the NASA Commercial Crew Program Mission Assurance Process

Science.gov (United States)

Canfield, Amy C.

2016-01-01

In 2010, the National Aeronautics and Space Administration (NASA) established the Commercial Crew Program (CCP) in order to provide human access to the International Space Station and low Earth orbit via the commercial (non-governmental) sector. A particular challenge to NASA has been how to determine that the Commercial Provider's transportation system complies with programmatic safety requirements. The process used in this determination is the Safety Technical Review Board which reviews and approves provider submitted hazard reports. One significant product of the review is a set of hazard control verifications. In past NASA programs, 100% of these safety critical verifications were typically confirmed by NASA. The traditional Safety and Mission Assurance (S&MA) model does not support the nature of the CCP. To that end, NASA S&MA is implementing a Risk Based Assurance process to determine which hazard control verifications require NASA authentication. Additionally, a Shared Assurance Model is also being developed to efficiently use the available resources to execute the verifications.

Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program - 2012

Energy Technology Data Exchange (ETDEWEB)

none,

2012-09-01

This FY 2012 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

Commercial Cyclone Incinerator Demonstration Program: April-September 1979

International Nuclear Information System (INIS)

Alexander, B.M.

1979-01-01

The commercial cyclone incinerator program was designed to study the effects of burning low-level waste contaminated with beta and gamma emitters in a cyclone system. The ultimate program goal is the demonstration of a cyclone incinerator at a nuclear power plant. During the past six months, the first program objective, NRC review of the Feasibility Plan, was achieved, and work began on the second objective, Complete Incinerator Feasibility Plan. Potential applications for the cyclone incinerator have been investigated. The feasibility plan for the incinerator system was reviewed with the Nuclear Regulatory Commission (NRC). Following a series of cold checkout burns, implementation of the feasibility plan was begun with the start of laboratory-scale experiments. Inconel 601 is being investigated as a material of construction for the incinerator burn chamber

Project Management Plan/Progress Report UT/GTKS Training Program Development for Commercial Building Operators

Energy Technology Data Exchange (ETDEWEB)

None, None

2013-03-31

Universidad del Turabo (UT), in a collaborative effort with Global Turn Key Services, Inc. (GTKS), proposed to develop a training program and a commercialization plan for the development of Commercial Building Operators (CBOs). The CBOs will operate energy efficient buildings to help maintain existing buildings up to their optimal energy performance level, and ensure that net-zero-energy buildings continuously operate at design specifications, thus helping achieve progress towards meeting BTP Strategic Goals of creating technologies and design approaches that enable net-zero-energy buildings at low incremental costs by 2025. The proposed objectives were then: (1) Develop a Commercial Building Operator (CBO) training program and accreditation that will in turn provide a certification to participants recognized by Accreditation Boards such as the North American Board of Certified Energy Practitioners (NABCEP) and Leadership in Energy & Environmental Designs (LEED). (2) Develop and implement a commercialization and sustainability plan that details marketing, deployment, financial characterization, job placement, and other goals required for long-term sustainability of the project after the funding period. (3) After program development and deployment, provide potential candidates with the knowledge and skill sets to obtain employment in the commercial building green energy (net-zero-energy building) job market. The developed CBO training program will focus on providing skills for participants, such as displaced and unemployed workers, to enter the commercial building green energy (net-zeroenergy building) job market. This course was designed to allow a participant with minimal to no experience in commercial building green technology to obtain the required skill sets to enter the job market in as little as 12 weeks of intensive multi-faceted learning. After completion of the course, the CBO staff concluded the participant will meet minimum established accreditation

A New Approach to Commercialization of NASA's Human Research Program Technologies, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This Phase I SBIR proposal describes, "A New Approach to Commercialization of NASA's Human Research Program Technologies." NASA has a powerful research program that...

Program-involvement effects on commercial attention and recall of successive and embedded advertising

NARCIS (Netherlands)

Moorman, M.; Willemsen, L.M.; Neijens, P.C.; Smit, E.G.

2012-01-01

Research on context effects has demonstrated a link between program-induced involvement and recall of commercials broadcast in breaks. However, the effect of program-induced involvement on recall of advertising embedded in the program itself has been understudied. In addition, little consideration

State geothermal commercialization programs in seven Rocky Mountain states. Semiannual progress report, July-December 1980

Energy Technology Data Exchange (ETDEWEB)

Lunis, B. C.; Toth, W. J. [comps.

1981-10-01

The activities and findings of the seven state commercialization teams participating in the Rocky Mountain Basin and Range commercialization program are described. Background information is provided; program objectives and the technical approach that is used are discussed; and the benefits of the program are described. The summary of findings is presented. Prospect identification, area development plans, site specific development analyses, time-phased project plans, the aggregated prospective geothermal energy use, and institutional analyses are discussed. Public outreach activities are covered and findings and recommendations are summarized. The commercialization activities carried out by the respective state teams are described for the following: Colorado, Montana, New Mexico, North Dakota, South Dakota, Utah, and Wyoming.

Television commercial violence during nonviolent programming: the 1998 major league baseball playoffs.

Science.gov (United States)

Anderson, C R

2000-10-01

playoffs were similar in violent content, compared with 1996. The violent commercials continue to consist primarily of promotions for television programs and big-screen movies. It continues to be counterintuitive to find such commercials in family-oriented programming and makes it difficult for parents to avoid exposing their children to this form of violence.

77 FR 6479 - Leased Commercial Access; Development of Competition and Diversity in Video Programming...

Science.gov (United States)

2012-02-08

... Commercial Access; Development of Competition and Diversity in Video Programming Distribution and Carriage... contained in the Second Report and Order, FCC 11-119, pertaining to carriage of video programming vendors by multichannel video programming distributors (program carriage rules). This notice is consistent with the Secord...

REQUIREMENT VERIFICATION AND SYSTEMS ENGINEERING TECHNICAL REVIEW (SETR) ON A COMMERCIAL DERIVATIVE AIRCRAFT (CDA) PROGRAM

Science.gov (United States)

2017-09-01

VERIFICATION AND SYSTEMS ENGINEERING TECHNICAL REVIEW (SETR) ON A COMMERCIAL DERIVATIVE AIRCRAFT (CDA) PROGRAM by Theresa L. Thomas September... ENGINEERING TECHNICAL REVIEW (SETR) ON A COMMERCIAL DERIVATIVE AIRCRAFT (CDA) PROGRAM 5. FUNDING NUMBERS 6. AUTHOR(S) Theresa L. Thomas 7...CODE 13. ABSTRACT (maximum 200 words) The Naval Air Systems Command (NAVAIR) systems engineering technical review (SETR) process does not

Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

Energy Technology Data Exchange (ETDEWEB)

none,

2010-08-01

This report identifies the commercial and near-commercial (emerging) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies Program in the Office of Energy Efficiency and Renewable Energy.

SPATIAL SEARCH IN COMMERCIAL FISHING: A DISCRETE CHOICE DYNAMIC PROGRAMMING APPROACH

OpenAIRE

Smith, Martin D.; Provencher, Bill

2003-01-01

We specify a discrete choice dynamic programming model of commercial fishing participation and location choices. This approach allows us to examine how fishermen collect information about resource abundance and whether their behavior is forward-looking.

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

Energy Technology Data Exchange (ETDEWEB)

Weakley, Steven A.

2012-09-28

The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify patents related to hydrogen and fuel cells that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents’ current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs that are related to hydrogen and fuel cells.

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

Energy Technology Data Exchange (ETDEWEB)

Weakley, Steven A.; Brown, Scott A.

2011-09-29

The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). To do this, Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify hydrogen- and fuel-cell-related patents that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of hydrogen- and fuel-cell-related grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs, and within the FCT portfolio.

Ineffectiveness of commercial weight-loss programs for achieving modest but meaningful weight loss: Systematic review and meta-analysis.

Science.gov (United States)

McEvedy, Samantha M; Sullivan-Mort, Gillian; McLean, Siân A; Pascoe, Michaela C; Paxton, Susan J

2017-10-01

This study collates existing evidence regarding weight loss among overweight but otherwise healthy adults who use commercial weight-loss programs. Systematic search of 3 databases identified 11 randomized controlled trials and 14 observational studies of commercial meal-replacement, calorie-counting, or pre-packaged meal programs which met inclusion criteria. In meta-analysis using intention-to-treat data, 57 percent of individuals who commenced a commercial weight program lost less than 5 percent of their initial body weight. One in two (49%) studies reported attrition ≥30 percent. A second meta-analysis found that 37 percent of program completers lost less than 5 percent of initial body weight. We conclude that commercial weight-loss programs frequently fail to produce modest but clinically meaningful weight loss with high rates of attrition suggesting that many consumers find dietary changes required by these programs unsustainable.

State geothermal commercialization programs in seven Rocky Mountain states. Semiannual progress report, July-December 1981

Energy Technology Data Exchange (ETDEWEB)

Lunis, B.C. (ed.)

1982-08-01

The activities and findings of the seven state commercialization teams participating in the Rocky Mountain Basin and Range commercialization program are described. The period covered is July through December 1981. Background information is provided, program objectives and the technical approach used are discussed, and the benefits of the program are described. Prospect identification, area development plans, site specific development analyses, time-phased project plans, the aggregated prospective geothermal energy use, and institutional analyses are discussed. Public outreach activities are covered and findings and recommendations are summarized.

Program adherence and effectiveness of a commercial nutrition program: the metabolic balance study.

Science.gov (United States)

Meffert, Cornelia; Gerdes, Nikolaus

2010-01-01

Objective. To assess the effectiveness of a commercial nutrition program in improving weight, blood lipids, and health-related quality of life (HRQOL). Methods. Prospective observational study with followup after 1, 3, 6, and 12 months with data from questionnaires and blood samples. Subjects. After 12 months, we had data from 524 subjects (= 60.6% of the initial samples). 84.1% of the subjects were women. The average BMI at baseline was 30.3 (SD = 5.7). Results. After 12 months, the average weight loss was 6.8 kg (SD = 7.1 kg). Program adherence declined over time but was still high after 12 months and showed a positive linear correlation with weight loss. Relevant blood parameters as well as HRQOL improved significantly. Conclusion. After 12 months, nearly two thirds of the samples had achieved >5% reduction of their initial weights. The high degree of program adherence is probably due to personal counseling and individually designed nutrition plans provided by the program.

Commercial equipment loads: End-Use Load and Consumer Assessment Program (ELCAP)

Energy Technology Data Exchange (ETDEWEB)

Pratt, R.G.; Williamson, M.A.; Richman, E.E.; Miller, N.E.

1990-07-01

The Office of Energy Resources of the Bonneville Power Administration is generally responsible for the agency's power and conservation resource planning. As associated responsibility which supports a variety of office functions is the analysis of historical trends in and determinants of energy consumption. The Office of Energy Resources' End-Use Research Section operates a comprehensive data collection program to provide pertinent information to support demand-side planning, load forecasting, and demand-side program development and delivery. Part of this on-going program is known as the End-Use Load and Consumer Assessment Program (ELCAP), an effort designed to collect electricity usage data through direct monitoring of end-use loads in buildings. This program is conducted for Bonneville by the Pacific Northwest Laboratory. This report provides detailed information on electricity consumption of miscellaneous equipment from the commercial portion of ELCAP. Miscellaneous equipment includes all commercial end-uses except heating, ventilating, air conditioning, and central lighting systems. Some examples of end-uses covered in this report are office equipment, computers, task lighting, refrigeration, and food preparation. Electricity consumption estimates, in kilowatt-hours per square food per year, are provided for each end-use by building type. The following types of buildings are covered: office, retail, restaurant, grocery, warehouse, school, university, and hotel/motel. 6 refs., 35 figs., 12 tabs.

78 FR 54197 - Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards...

Science.gov (United States)

2013-09-03

.... EERE-2013-BT-STD-0030] RIN 1904-AD01 Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards for Commercial Packaged Boilers AGENCY: Office of Energy Efficiency and..., Office of Energy Efficiency and Renewable Energy, Building Technologies Office, EE-2J, 1000 Independence...

78 FR 66039 - Modification of National Customs Automation Program Test Concerning Automated Commercial...

Science.gov (United States)

2013-11-04

... Customs Automation Program Test Concerning Automated Commercial Environment (ACE) Cargo Release (Formerly...) plan to both rename and modify the National Customs Automation Program (NCAP) test concerning the... data elements required to obtain release for cargo transported by air. The test will now be known as...

The length-weight and length-length relationships of bluefish, Pomatomus saltatrix (Linnaeus, 1766 from Samsun, middle Black Sea region

Directory of Open Access Journals (Sweden)

Melek Özpiçak

2017-10-01

Full Text Available In this study, length-weight relationship (LWR and length-length relationship (LLR of bluefish, Pomatomus saltatrix were determined. A total of 125 specimens were sampled from Samsun, the middle Black Sea in 2014 fishing season. Bluefish specimens were monthly collected from commercial fishing boats from October to December 2014. All captured individuals (N=125 were measured to the nearest 0.1 cm for total, fork and standard lengths. The weight of each fish (W was recorded to the nearest 0.01 g. According to results of analyses, there were no statistically significant differences between sexes in term of length and weight (P˃0.05. The minimum and maximum total, fork and standard lengths of bluefish ranged between 13.5-23.6 cm, 12.50-21.80 cm and 10.60-20.10 cm, respectively. The equation of length-weight relationship were calculated as W=0.008TL3.12 (r2>0.962. Positive allometric growth was observed for bluefish (b>3. Length-length relationship was also highly significant (P<0.001 with coefficient of determination (r2 ranging from 0.916 to 0.988.

Pathways to Commercial Success: Technologies and Products Supported by the Hydrogen, Fuel Cells and Infrastructure Technologies Program

Energy Technology Data Exchange (ETDEWEB)

none,

2009-08-01

This report documents the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Hydrogen, Fuel Cells and Infrastructure Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

77 FR 48527 - National Customs Automation Program (NCAP) Test Concerning Automated Commercial Environment (ACE...

Science.gov (United States)

2012-08-14

... National Customs Automation Program (NCAP) test concerning the simplified entry functionality in the... DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection National Customs Automation Program (NCAP) Test Concerning Automated Commercial Environment (ACE) Simplified Entry: Modification of...

Evaluation of a four- versus six-week length of stay in the Navy's alcohol treatment program.

Science.gov (United States)

Trent, L K

1998-05-01

Attempts to balance escalating health care costs with resource downsizing have prompted alcohol treatment directors in the U.S. Navy to consider reducing the standard length of stay in treatment. The objectives of this study were to (1) determine whether a 4-week inpatient treatment program is as effective as a 6-week program, and (2) explore the potential for matching patients to a 4- or 6-week program according to the severity of their condition at intake. A total of 2,823 active-duty alcohol-dependent inpatients (2,685 men, 138 women) at 12 Navy treatment facilities participated in the evaluation. All facilities conducted a 6-week program until data had been collected for 1,380 participants; they then switched to a 4-week program (n = 1,443). Background information and clinical profile were obtained when patients entered treatment; 1-year outcome data (e.g., alcohol use, behavior problems, job performance, quality of life) were obtained from participants, work supervisors and aftercare advisors. Hierarchical multiple regression analyses were used to assess the effect of length of stay on outcome and to examine patient-program interactions. The single best predictor of success at 1 year was months of aftercare attendance. Program membership failed to explain any of the observed differences in the criterion measures, once the effects of other predictors had been taken into account. Severity of condition and patient-program interactions were likewise nonsignificant. It was concluded that a reduction in length of stay from 6 weeks to 4 weeks in the Navy's inpatient alcohol treatment program would not have an adverse effect on outcome.

The Impact of Length of Engagement in After-School STEM Programs on Middle School Girls

Science.gov (United States)

Cupp, Garth Meichel

An underrepresentation of females exists in the STEM fields. In order to tackle this issue, work begins early in the education of young women to ensure they are interested and have the confidence to gain a career in the STEM fields. It is important to engage girls in STEM opportunities in and out of school to ignite their interest and build their confidence. Brigid Barron's learning ecology perspective shows that girls pursuing STEM outside of the classroom is critical to their achievement in the STEM pipeline. This study investigated the impact after-school STEM learning opportunities have on middle school girls by investigating (a) how the length of engagement in after-school programs can affect the confidence of female students in their science and math abilities; (b) how length of engagement in after-school programs can affect the interest of female students in attaining a career in STEM; (c) how length of engagement in after-school programs can affect interest in science and math classes; and (d) how length of engagement can affect how female students' view gender parity in the STEM workforce. The major findings revealed no statistical significance when comparing confidence in math or science abilities or the perception that gender plays a role in attaining a career in STEM. The findings revealed statistical significance in the areas when comparing length of engagement in the girls' interest in their math class and attaining a career in three of the four STEM fields: science, technology, and engineering. The findings showed that multiple terms of engagement in the after-school STEM programs appear to be an effective catalyst to maintain the interest of girls pursuing STEM-related careers, in addition to allowing their interest in a topic to provide a new lens for the way they see their math work during the school day. The implications of this study show that schools must engage middle school girls who are interested in STEM in a multitude of settings

State geothermal commercialization programs in seven Rocky Mountain states. Semiannual progress report, January-July 1981

Energy Technology Data Exchange (ETDEWEB)

Lunis, B.C.; Toth, W.J. (comps.)

1982-05-01

The activities and findings of the seven state commercialization teams participating in the Rocky Mountain Basin and Range commercialization program are described. For each state (Colorado, Montana, New Mexico, North and South Dakota, Utah, and Wyoming), prospect identification, area development plans, site specific development analyses, time-phased project plans, the aggregated prospective geothermal energy use, and institutional analyses are discussed. Public outreach activities are also covered, and findings and recommendations are given for each state. Some background information about the program is provided. (LEW)

Demand side management program evaluation based on industrial and commercial field data

International Nuclear Information System (INIS)

Eissa, M.M.

2011-01-01

Demand Response is increasingly viewed as an important tool for use by the electric utility industry in meeting the growing demand for electricity. There are two basic categories of demand response options: time varying retail tariffs and incentive Demand Response Programs. is applying the time varying retail tariffs program, which is not suitable according to the studied load curves captured from the industrial and commercial sectors. Different statistical studies on daily load curves for consumers connected to 22 kV lines are classified. The load curve criteria used for classification is based on peak ratio and night ratio. The data considered here is a set of 120 annual load curves corresponding to the electric power consumption (the western area in the King Saudi Arabia (KSA)) of many clients in winter and some months in the summer (peak period). The study is based on real data from several Saudi customer sectors in many geographical areas with larger commercial and industrial customers. The study proved that the suitable Demand Response for the ESC is the incentive program. - Highlights: → Study helps in selecting the proper demand side program. → A credit will be given for the customers during summer months. → Reduction in the electric bill. → Monthly bill credit is decreased based on customers' peak load reduction. → Guide for applying the proper demand side program suitable for the utility and customers.

76 FR 34246 - Automated Commercial Environment (ACE); Announcement of National Customs Automation Program Test...

Science.gov (United States)

2011-06-13

... Environment (ACE); Announcement of National Customs Automation Program Test of Automated Procedures for In... Customs Automation Program (NCAP) test relating to highway movements of commercial goods that are transported in-bond through the United States from one point in Canada to another point in Canada. The NCAP...

A Program for Introducing Information Literacy to Commercial Art and Design Students

Directory of Open Access Journals (Sweden)

David A. Walczak

2010-03-01

Full Text Available This paper describes the process of developing and implementing a comprehensive, school-wide, and sustainable information literacy program at a commercial art and design school. The program requires that information literacy student learning outcomes be included in specific General Education and art and design courses across the curriculum. The results of this multi-year effort indicate that while the program is sound, teaching information literacy is an on-going effort requiring much more training of faculty and students. Best practices in information literacy in library science and art and design literature are reviewed

Commercial Banking Industry Survey.

Science.gov (United States)

Bright Horizons Children's Centers, Cambridge, MA.

Work and family programs are becoming increasingly important in the commercial banking industry. The objective of this survey was to collect information and prepare a commercial banking industry profile on work and family programs. Fifty-nine top American commercial banks from the Fortune 500 list were invited to participate. Twenty-two…

Public Good or Commercial Opportunity: Case Studies in Remote Sensing Commercialization

Science.gov (United States)

Johnston, Shaida; Cordes, Joseph

2002-01-01

The U.S. Government is once again attempting to commercialize the Landsat program and is asking the private sector to develop a next generation mid-resolution remote sensing system that will provide continuity with the thirty-year data archive of Landsat data. Much of the case for commercializing the Landsat program rests on the apparently successful commercialization of high-resolution remote sensing activities coupled with the belief that conditions have changed since the failed attempt to commercialize Landsat in the 1980s. This paper analyzes the economic, political and technical conditions that prevailed in the 1980s as well as conditions that might account for the apparent success of the emerging high-resolution remote sensing industry today. Lessons are gleaned for the future of the Landsat program.

Referral to a Commercial Weight Management Program in Patients With Coronary Heart Disease: A PILOT STUDY IN THE NETHERLANDS.

Science.gov (United States)

Minneboo, Madelon; Peters, Ron J G; Miller-Kovach, Karen; Lemmens, Jeanine; Bucx, Jeroen J J

2015-01-01

To quantify the impact of a commercial weight management program on weight change in obese patients with coronary heart disease. An observational, single-center pilot study in the Netherlands. Forty-five patients diagnosed with a recent acute coronary syndrome and a body mass index of >30 kg/m2 were recruited. The commercial weight management intervention (Weight Watchers) promotes a hypoenergetic and balanced diet, increased physical activity, and group support. The program included weekly 30-minute in-hospital meetings with an experienced coach. The program was offered in parallel with a cardiac rehabilitation program. Thirty-five patients completed the program. Of these patients, 32 patients (91%) decreased body weight. Mean weight change was -5.8 kg (range: +0.6 kg to -15.4 kg), and 20 patients (57%) achieved the target of 5% weight loss of their initial weight. Twenty-seven patients continued the commercial weight loss program after 14 weeks, the mean followup of these patients was 34 weeks and their mean weight change was -9.1 kg (range: 0.0-23.0 kg). Obese patients, discharged after an acute coronary syndrome, who were referred to a commercial weight management program, achieved significant weight loss. Although this is a nonrandomized pilot study with patients who were selected by motivation and by the ability to participate in the program, the proportion of weight loss is significant and promising.

Guidelines for Selection, Screening and Qualification of Low-Voltage Commercial Multilayer Ceramic Capacitors for Space Programs

Science.gov (United States)

Teverovsky, Alexander A.

2012-01-01

This document has been developed in the course of NASA Electronic Parts and Packaging (NEPP) program and is not an official endorsement of the insertion of commercial capacitors in space programs or an established set of requirements for their testing. The purpose of this document is to suggest possible ways for selection, screening, and qualification of commercial capacitors for NASA projects and open discussions in the parts engineering community related to the use of COTS ceramic capacitors. This guideline is applicable to commercial surface mount chip, simple parallel plate design, multi-layer ceramic capacitors (MLCCs) rated to voltages of 100V and less. Parts with different design, e.g. low inductance ceramic capacitors (LICA), land grid array (LGA) etc., might need additional testing and tailoring of the requirements described in this document. Although the focus of this document is on commercial MLCCs, many procedures discussed below would be beneficial for military-grade capacitors

Accelerating the commercialization on new technologies. [free market operation of federal alternate energy sources programs

Science.gov (United States)

Kuehn, T. J.; Nawrocki, P. M.

1978-01-01

It is suggested that federal programs for hastening the adoption of alternative energy sources must operate within the free market structure. Five phases of the free market commercialization process are described. Federal role possibilities include information dissemination and funding to stimulate private sector activities within these five phases, and federally sponsored procedures for accelerating commercialization of solar thermal small power systems are considered.

Performance measures in the earth observations commercialization applications program

Science.gov (United States)

Macauley, Molly K.

1996-03-01

Performance measures in the Earth Observations Commercialization Application Program (EOCAP) are key to its success and include net profitability; enhancements to industry productivity through generic innovations in industry practices, standards, and protocols; and documented contributions to public policy governing the newly developing remote sensing industry. Because EOCAP requires company co-funding, both parties to the agreement (the government and the corporate partner) have incentives to pursue these goals. Further strengthening progress towards these goals are requirements for business plans in the company's EOCAP proposal, detailed scrutiny given these plans during proposal selection, and regularly documented progress reports during project implementation.

Changes in weight control behaviors and hedonic hunger during a 12-week commercial weight loss program.

Science.gov (United States)

O'Neil, Patrick M; Theim, Kelly R; Boeka, Abbe; Johnson, Gail; Miller-Kovach, Karen

2012-12-01

Greater use of key self-regulatory behaviors (e.g., self-monitoring of food intake and weight) is associated with greater weight loss within behavioral weight loss treatments, although this association is less established within widely-available commercial weight loss programs. Further, high hedonic hunger (i.e., susceptibility to environmental food cues) may present a barrier to successful behavior change and weight loss, although this has not yet been examined. Adult men and women (N=111, body mass index M±SD=31.5±2.7kg/m(2)) were assessed before and after participating in a 12-week commercial weight loss program. From pre- to post-treatment, reported usage of weight control behaviors improved and hedonic hunger decreased, and these changes were inversely associated. A decrease in hedonic hunger was associated with better weight loss. An improvement in reported weight control behaviors (e.g., self-regulatory behaviors) was associated with better weight loss, and this association was even stronger among individuals with high baseline hedonic hunger. Findings highlight the importance of specific self-regulatory behaviors within weight loss treatment, including a commercial weight loss program developed for widespread community implementation. Assessment of weight control behavioral skills usage and hedonic hunger may be useful to further identify mediators of weight loss within commercial weight loss programs. Future interventions might specifically target high hedonic hunger and prospectively examine changes in hedonic hunger during other types of weight loss treatment to inform its potential impact on sustained behavior change and weight control. Copyright © 2012 Elsevier Ltd. All rights reserved.

Food Commercials and Kids: Characterizing Advertising Content of Children's Online Television Programs

OpenAIRE

Penn, Jerrod; Staley, Daniel; Smith, Chaquenta; Saghaian, Sayed H.

2011-01-01

Internet marketing has gained attention as a new medium to advertise food products to children. This study examines the prevalence of food marketing during children's television programs that are available on the internet. While food is the largest product category advertised, commercials make up a smaller portion of episode time online compared to previous reports of television advertising.

Flame Length

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — Flame length was modeled using FlamMap, an interagency fire behavior mapping and analysis program that computes potential fire behavior characteristics. The tool...

Development of an diffraction spectrometer and its control program using inexpensive commercial items

International Nuclear Information System (INIS)

Ormaceha, O.; Urquidi, O.; Cisneros, J.

2012-01-01

A diffraction spectrometer was developed, based on low cost commercial elements. The spectrometer was designed with the configuration of a transmission diffraction grating spectrometer with adjustable entrance slit. It was built with commercial elements like a holographic grating, collimator lens and a digital projector lens. For detection, a web cam CMOS sensor was used. A MATLAB based program was developed for the equipment, allowing the acquisition and processing of spectra. The optical defects were corrected using a non linear wavelength calibration. The SNR of final spectrum was increased in 14 times by processing the data. The Spectrometer showed and effective resolution of 1.4 nm and a precision of ±0.28 nm in final tests, showing to work properly with a cost 10 times lower (in materials) to the commercial price of a similar equipment (Ocean Optics USB4000). (Author)

Commercial waste treatment program annual progress report for FY 1983

Energy Technology Data Exchange (ETDEWEB)

McElroy, J.L.; Burkholder, H.C. (comps.)

1984-02-01

This annual report describes progress during FY 1983 relating to technologies under development by the Commercial Waste Treatment Program, including: development of glass waste form and vitrification equipment for high-level wastes (HLW); waste form development and process selection for transuranic (TRU) wastes; pilot-scale operation of a radioactive liquid-fed ceramic melter (LFCM) system for verifying the reliability of the reference HLW treatment proces technology; evaluation of treatment requirements for spent fuel as a waste form; second-generation waste form development for HLW; and vitrification process control and product quality assurance technologies.

Commercial Alpha Waste Program. Quarterly progress report, January--March, 1975

International Nuclear Information System (INIS)

Cooley, C.R.

1975-10-01

This is the fourth quarterly progress report on the Commercial Alpha Waste Program being conducted at the Hanford Engineering Development Laboratory (HEDL) for the Division of Nuclear Fuel Cycle and Production, U. S. Energy Research and Development Administration. Data on waste composition for fuel reprocessing operations are discussed as well as information on radwaste generation at nuclear power reactors. Progress to date on development of the acid digestion process for treating combustible waste is discussed including initial studies using a critically safe tray digester. Data on alpha waste generation and product storage are also presented

Space commercialization: Launch vehicles and programs; Symposium on Space Commercialization: Roles of Developing Countries, Nashville, TN, Mar. 5-10, 1989, Technical Papers

International Nuclear Information System (INIS)

Shahrokhi, F.; Greenberg, J.S.; Al-saud, Turki.

1990-01-01

The present volume on progress in astronautics and aeronautics discusses the advent of commercial space, broad-based space education as a prerequisite for space commercialization, and obstacles to space commercialization in the developing world. Attention is given to NASA directions in space propulsion for the year 2000 and beyond, possible uses of the external tank in orbit, power from the space shuttle and from space for use on earth, Long-March Launch Vehicles in the 1990s, the establishment of a center for advanced space propulsion, Pegasus as a key to low-cost space applications, legal problems of developing countries' access to space launch vehicles, and international law of responsibility for remote sensing. Also discussed are low-cost satellites and satellite launch vehicles, satellite launch systems of China; Raumkurier, the German recovery program; and the Ariane transfer vehicle as logistic support to Space Station Freedom

ORNL capability to conduct post irradiation examination of full-length commercial nuclear fuel rods

International Nuclear Information System (INIS)

Spellman, Donald J.

2007-01-01

Hot cells at Oak Ridge National Laboratory (ORNL) are nearing completion of a multi-year upgrade program to implement 21. century capabilities to meet the examination demands for higher burnup fuels and the future demands that will come from fuel recycling programs. Fuel reliability and zero tolerance for fuel failure is more than an industry goal. Fuel reliability is becoming a requirement that supports the renaissance of nuclear power generation. Thus, fuel development and management of new forms of waste that will come from programs such as the Global Nuclear Energy Partnership (GNEP) will require extensive use of the flexible, high-quality, technically advanced hot cells at ORNL. ORNL has the capability to perform post irradiation examination (PIE) of irradiated commercial nuclear fuel rods and the management structure to ensure a timely, cost-effective result. ORNL can: 1) Handle the transportation issues, 2) Perform macroscopic fuel rod examinations, 3) Perform microscopic fuel and clad examinations, and 4) Manage legacy material and waste disposal issues from PIE activities. All four of these items will be managed in a way that allows the customer day-to-day access to the results and data. Hot cell examination equipment that is necessary to determine the characteristics and performance of irradiated materials must operate in a hostile environment and is subject to long-term degradation that may result in reliability and quality assurance (QA) issues. ORNL has modernized its hot cell nuclear fuel examination equipment, installing state-of-the-art automated examination equipment and data gathering capabilities. ORNL is planning a major commitment to nuclear fuel examination and development, and future improvements will continue to be made over the next few years. (author)

Length-weight relationships, condition factors and relative weight of ...

African Journals Online (AJOL)

The aim of this study was to record the length-weight relationship parameters and condition factors for some commercially important fish of Bushehr coastal waters of Persian Gulf. The length-weight relationships were calculated for five species caught during fishing surveys using different types of fishing gears (trawls, pots ...

ESTIMATION OF BIOMASS COMMERCIAL SPROUTS OF Ilex paraguariensis A.ST.-HIL

Directory of Open Access Journals (Sweden)

Elisabete Vuaden

2009-10-01

Full Text Available This study aimed at developing some models that allow estimating the biomass of commercial green shoots of Ilex paraguariensis after pruning, at 10 years-old. In September 2007, 40 Ilex paraguariensis were pruned. One year after the first pruning, in 2008, they were evaluated dendrometrically and their biomass was determined from the commercial harvest of 16 individuals. To the others, the commercial biomass was estimated by the sum of the biomass of shoots.  The result obtained is that the biomass of commercial sprouts can be estimated as a function of the length of the rolls sprouting, with specific models for sprouts short, simple and compound average sprouts and long sprouts compounds. The models used to estimate the biomass of commercial sprouts using the length sum rolls and rolls of the length as independent variables underestimate the values of biomass with a margin of error of only 2.6%.

NASA's commercial research plans and opportunities

Science.gov (United States)

Arnold, Ray J.

One of the primary goals of the National Aeronautics and Space Administration's (NASA) commercial space development plan is to encourage the development of space-based products and markets, along with the infrastructure and transportation that will support those products and markets. A three phased program has been instituted to carry out this program. The first phase utilizes government grants through the Centers for the Commercial Development of Space (CCDS) for space-related, industry driven research; the development of a technology data base; and the development of commercial space transportation and infrastructure. The second phase includes the development of these technologies by industry for new commercial markets, and features unique industry/government collaborations such as Joint Endeavor Agreements. The final phase will feature technical applications actually brought to the marketplace. The government's role will be to support industry required infrastructure to encourage start-up markets and industries through follow-on development agreements such as the Space Systems Development Agreement. The Office of Commercial Programs has an aggressive flight program underway on the Space Shuttle, suborbital rockets, orbital expendable launch vehicles, and the Commercial Middeck Accommodation Module with SPACEHAB Inc. The Office of Commercial Program's has been allocated 35 percent of the U.S. share of the Space Station Freedom resources for 1997 utilization. A utilization plan has been developed with the Centers for the Commercial Development of Space and has identified eleven materials processing and biotechnology payloads occupying 5 double racks in the pressurized module as well as two payloads external to the module in materials exposure and environment monitoring. The Office of Commercial Programs will rely on the Space Station Freedom to provide the long duration laboratory component for space-based commercial research.

The commercial evolution of the Titan program

Science.gov (United States)

Isakowitz, Steven

1988-07-01

The present status evaluation of proprietary efforts to turn the once exclusively government-requirements-oriented Titan launch vehicle into a successful commercial competitor is divided into three phases. The first phase notes recent changes in U.S. space transportation policy and the Titan configurations evaluated for commercial feasibility. The second phase is a development history for the current vehicle's marketing organization and the right-to-use agreement for a launch site. Phase three projects the prospective marketing climate for a commercial Titan vehicle and its planned improvements.

Integration of structural health monitoring solutions onto commercial aircraft via the Federal Aviation Administration structural health monitoring research program

Science.gov (United States)

Swindell, Paul; Doyle, Jon; Roach, Dennis

2017-02-01

The Federal Aviation Administration (FAA) started a research program in structural health monitoring (SHM) in 2011. The program's goal was to understand the technical gaps of implementing SHM on commercial aircraft and the potential effects on FAA regulations and guidance. The program evolved into a demonstration program consisting of a team from Sandia National Labs Airworthiness Assurance NDI Center (AANC), the Boeing Corporation, Delta Air Lines, Structural Monitoring Systems (SMS), Anodyne Electronics Manufacturing Corp (AEM) and the FAA. This paper will discuss the program from the selection of the inspection problem, the SHM system (Comparative Vacuum Monitoring-CVM) that was selected as the inspection solution and the testing completed to provide sufficient data to gain the first approved use of an SHM system for routine maintenance on commercial US aircraft.

Commercial Building Energy Asset Score Program Overview and Technical Protocol (Version 1.1)

Energy Technology Data Exchange (ETDEWEB)

Wang, Na; Goel, Supriya; Makhmalbaf, Atefe

2013-08-09

The U.S. Department of Energy (DOE) is developing a voluntary national scoring system for commercial buildings to help building owners and managers assess a building’s energy-related systems independent of operations. The goal of the score is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system, known as the Commercial Building Energy Asset Score, will allow building owners and managers to compare their building infrastructure against peers and track building upgrades over time. The system will also help other building stakeholders (e.g., building investors, tenants, financiers, and appraisers) understand the relative efficiency of different buildings in a way that is independent from operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset scoring tool. The alternative methods that were considered prior to developing the current approach are described in the Program Overview and Technical Protocol Version 1.0.

Commercial Titan program - Status and outlook

Science.gov (United States)

van Rensselaer, F. L.; Browne, E. M.

Out of a quarter-century heritage of eminently successful expendable launch vehicle history with the U.S. government, a commercial launch services enterprise which challenges the corporation as well as the competition has been launched within the Martin Marietta Corporation. This paper is an inside look at the philosophy, structure, and success of the new subsidiary, which is attempting to win a share of the international communication satellite market as well as the U.S. government commercial launch services market.

Calculation of pressure distribution in vacuum systems using a commercial finite element program

International Nuclear Information System (INIS)

Howell, J.; Wehrle, B.; Jostlein, H.

1991-01-01

The finite element method has proven to be a very useful tool for calculating pressure distributions in complex vacuum systems. A number of finite element programs have been developed for this specific task. For those who do not have access to one of these specialized programs and do not wish to develop their own program, another option is available. Any commercial finite element program with heat transfer analysis capabilities can be used to calculate pressure distributions. The approach uses an analogy between thermal conduction and gas conduction with the quantity temperature substituted for pressure. The thermal analogies for pumps, gas loads and tube conductances are described in detail. The method is illustrated for an example vacuum system. A listing of the ANSYS data input file for this example is included. 2 refs., 4 figs., 1 tab

Weight change in a commercial web-based weight loss program and its association with website use: cohort study.

Science.gov (United States)

Neve, Melinda; Morgan, Philip J; Collins, Clare E

2011-10-12

There is a paucity of information in the scientific literature on the effectiveness of commercial weight loss programs, including Web-based programs. The potential of Web-based weight loss programs has been acknowledged, but their ability to achieve significant weight loss has not been proven. The objectives were to evaluate the weight change achieved within a large cohort of individuals enrolled in a commercial Web-based weight loss program for 12 or 52 weeks and to describe participants' program use in relation to weight change. Participants enrolled in an Australian commercial Web-based weight loss program from August 15, 2007, through May 31, 2008. Self-reported weekly weight records were used to determine weight change after 12- and 52-week subscriptions. The primary analysis estimated weight change using generalized linear mixed models (GLMMs) for all participants who subscribed for 12 weeks and also for those who subscribed for 52 weeks. A sensitivity analysis was conducted using the last observation carried forward (LOCF) method. Website use (ie, the number of days participants logged on, made food or exercise entries to the Web-based diary, or posted to the discussion forum) was described from program enrollment to 12 and 52 weeks, and differences in website use by percentage weight change category were tested using Kruskal-Wallis test for equality of populations. Participants (n = 9599) had a mean (standard deviation [SD]) age of 35.7 (9.5) years and were predominantly female (86% or 8279/9599) and obese (61% or 5866/9599). Results from the primary GLMM analysis including all enrollees found the mean percentage weight change was -6.2% among 12-week subscribers (n = 6943) and -6.9% among 52-week subscribers (n = 2656). Sensitivity analysis using LOCF revealed an average weight change of -3.0% and -3.5% after 12 and 52 weeks respectively. The use of all website features increased significantly (P Web-based weight loss program is likely to be in the range of

A prequalifying program for evaluating the analytical performance of commercial laboratories

International Nuclear Information System (INIS)

Reith, C.C.; Bishop, C.T.

1987-01-01

Soil and water samples were spiked with known activities of radionuclides and sent to seven commercial laboratories that had expressed an interest in analyzing environmental samples for the Waste Isolation Pilot Plant (WIPP). This Prequalifying Program was part of the selection process for an analytical subcontractor for a three-year program of baseline radiological surveillance around the WIPP site. Both media were spiked at three different activity levels with several transuranic radionuclides, as well as tritium, fission products, and activation products. Laboratory performance was evaluated by calculating relative error for each radionuclide in each sample, assigning grade values, and compiling grades into report cards for each candidate. Results for the five laboratories completing the Prequalifying Program were pooled to reveal differing degrees of difficulty among the treatments and radionuclides. Interlaboratory comparisons revealed systematic errors in the performance of one candidate. The final report cards contained clear differences among overall grades for the five laboratories, enabling analytical performance to be used as a quantitative criterion in the selection of an analytical subcontractor. (author)

The Innovative Technology Deployment (ITD)/ Commercial Vehicle Information Systems and Networks (CVISN) Program, 2016 annual report.

Science.gov (United States)

2017-06-01

On December 4, 2015, the Fixing Americas Surface Transportation Act, 2015 (FAST Act) (Pub. L. 114-94) established the Innovative Technology Deployment (ITD) Grant Program, replacing the long-standing Commercial Vehicle Information Systems and Netw...

State geothermal commercialization programs in ten Rocky Mountain states. Semi-annual progress report, July-December 1979

Energy Technology Data Exchange (ETDEWEB)

Griffith, J.L. (comp.)

1980-08-01

The activities and findings of the ten state teams participating in the Rocky Mountain Basin and Range Regional Hydrothermal Commercialization Program for the period are described. A summary of the state projects, compilation of project accomplishments, summary of findings, and a description of the major conclusions and recommendations are presented. Also included are chapters on the commercialization activities carried out by individual teams in each state: Arizona, Colorado, Idaho, Montana, Nevada, New-Mexico, North Dakota, South Dakota, Utah, and Wyoming. (MHR)

Commercial Fisheries Database Biological Sample (CFDBS)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Age and length frequency data for finfish and invertebrate species collected during commercial fishing vessels. Samples are collected by fisheries reporting...

fastPACE Train-the-Trainer: A scalable new educational program to accelerate training in biomedical innovation, entrepreneurship, and commercialization.

Science.gov (United States)

Servoss, Jonathan; Chang, Connie; Fay, Jonathan; Lota, Kanchan Sehgal; Mashour, George A; Ward, Kevin R

2017-10-01

The Institute of Medicine recommended the advance of innovation and entrepreneurship training programs within the Clinical & Translational Science Award (CTSA) program; however, there remains a gap in adoption by CTSA institutes. The University of Michigan's Michigan Institute for Clinical & Health Research and Fast Forward Medical Innovation (FFMI) partnered to develop a pilot program designed to teach CTSA hubs how to implement innovation and entrepreneurship programs at their home institutions. The program provided a 2-day onsite training experience combined with observation of an ongoing course focused on providing biomedical innovation, commercialization and entrepreneurial training to a medical academician audience (FFMI fast PACE). All 9 participating CTSA institutes reported a greater connection to biomedical research commercialization resources. Six launched their own version of the FFMI fast PACE course or modified existing programs. Two reported greater collaboration with their technology transfer offices. The FFMI fast PACE course and training program may be suitable for CTSA hubs looking to enhance innovation and entrepreneurship within their institutions and across their innovation ecosystems.

The cost and performance of utility commercial lighting programs. A report from the Database on Energy Efficiency Programs (DEEP) project

Energy Technology Data Exchange (ETDEWEB)

Eto, J.; Vine, E.; Shown, L.; Sonnenblick, R.; Payne, C. [Lawrence Berkeley Lab., CA (United States). Energy and Environment Div.

1994-05-01

The objective of the Database on Energy Efficiency Programs (DEEP) is to document the measured cost and performance of utility-sponsored, energy-efficiency, demand-side management (DSM) programs. Consistent documentation of DSM programs is a challenging goal because of problems with data consistency, evaluation methodologies, and data reporting formats that continue to limit the usefulness and comparability of individual program results. This first DEEP report investigates the results of 20 recent commercial lighting DSM programs. The report, unlike previous reports of its kind, compares the DSM definitions and methodologies that each utility uses to compute costs and energy savings and then makes adjustments to standardize reported program results. All 20 programs were judged cost-effective when compared to avoided costs in their local areas. At an average cost of 3.9{cents}/kWh, however, utility-sponsored energy efficiency programs are not ``too cheap to meter.`` While it is generally agreed upon that utilities must take active measures to minimize the costs and rate impacts of DSM programs, the authors believe that these activities will be facilitated by industry adoption of standard definitions and reporting formats, so that the best program designs can be readily identified and adopted.

Length and coverage of inhibitory decision rules

KAUST Repository

Alsolami, Fawaz

2012-01-01

Authors present algorithms for optimization of inhibitory rules relative to the length and coverage. Inhibitory rules have a relation "attribute ≠ value" on the right-hand side. The considered algorithms are based on extensions of dynamic programming. Paper contains also comparison of length and coverage of inhibitory rules constructed by a greedy algorithm and by the dynamic programming algorithm. © 2012 Springer-Verlag.

75 FR 41845 - Energy Conservation Program for Certain Commercial and Industrial Equipment: Decision and Order...

Science.gov (United States)

2010-07-19

... conditioners and heat pumps. The waiver is specific to the Sanyo variable capacity ECO-i (commercial) multi... in this notice to test and rate its ECO-i multi-split products. DATES: This Decision and Order is..., Building Technologies Program, Mailstop EE-2J, 1000 Independence Avenue, SW., Washington, DC 20585-0121...

A systems approach to the commercialization of space communications technology - The NASA/JPL Mobile Satellite Program

Science.gov (United States)

Weber, William J., III; Gray, Valerie W.; Jackson, Byron; Steele, Laura C.

1991-10-01

This paper discusss the systems approach taken by NASA and the Jet Propulsion Laboratory in the commercialization of land-mobile satellite services (LMSS) in the United States. As the lead center for NASA's Mobile Satellite Program, JPL was involved in identifying and addressing many of the key barriers to commercialization of mobile satellite communications, including technical, economic, regulatory and institutional risks, or uncertainties. The systems engineering approach described here was used to mitigate these risks. The result was the development and implementation of the JPL Mobile Satellite Experiment Project. This Project included not only technology development, but also studies to support NASA in the definition of the regulatory, market, and investment environments within which LMSS would evolve and eventually operate, as well as initiatives to mitigate their associated commercialization risks. The end result of these government-led endeavors was the acceleration of the introduction of commercial mobile satellite services, both nationally and internationally.

Semi-commercialization of PVP-carrageenan hydrogel

International Nuclear Information System (INIS)

Relleve, Lorna S.; Abad, Lucille V.; Aranilla, Charito T.; Dela Rosa, A.M.

2008-01-01

The Philippine Nuclear Research Institute (PNRI) has developed the PVP-Carrageenan hydrogel wound dressing by radiation processing. The PVP-Carrageenan hydrogel has undergone clinical testing for burn and bedsores. It has already a pending patent application (No. 1-2000-02471) at the Philippine Patent Office. The techno-economic feasibility study has also been completed. In order to commercialize this product, a project on semi-commercialization in partnership with the investor was proposed to Technology Incubation for Commercialization (TECHNICOM), a technology transfer program of the Department of Science and Technology (DOST). TECHNICOM was established in 2003 under the National Science and Technology Plan (2002-2020) as a strategic technology transfer program. The program aims to identify key technological breakthroughs especially those generated by R and D institutes. It can intervene through the following: technology assessment/commercial prototype development; business plan/feasibility study preparation; intellectual property rights protection; technology valuation negotiation and licensing; semi-commercial production assistance and training/consultancy services. High technology applications with commercial potentials are given priority. Under semi-commercialization stage, government funds will be provided to match private sector investment in the commercial application of a particular technology innovation. This will lessen the risk of commercialization and ensure commitment from the investors. Commercial success in the shortest time is ensured since scientist can then work closely with the private sector at the production floor while testing the gaps in the technology. (author)

Commercial incineration demonstration

International Nuclear Information System (INIS)

Vavruska, J.S.; Borduin, L.C.

1982-01-01

Low-level radioactive wastes (LLW) generated by nuclear utilities presently are shipped to commercial burial grounds for disposal. Increasing transportation and disposal costs have caused industry to consider incineration as a cost-effective means of volume reduction of combustible LLW. Repeated inquiries from the nuclear industry regarding the applicability of the Los Alamos controlled air incineration (CAI) design led the DOE to initiate a commercial demonstration program in FY-1980. Development studies and results in support of this program involving ion exchange resin incineration and fission/activation product distributions within the Los Alamos CAI are described

Methods and results of implementing a commercially available videotaped health physics training program in a multi-disciplined DOE facility

International Nuclear Information System (INIS)

O'Neal, B.L.

1979-01-01

Sandia, a prime contractor for DOE, is a multi-disciplined research and development laboratory. Its various activities include the operations of two nuclear reactors, several multi-kilocurie gamma irradiation facilities, a transuranic hot cell facility, various and numerous particle accelerators and x-ray generators, and many other areas involving employees working with or around radioactive materials or radiation producing machines. Since March 1979, Sandia has conducted a formalized basic radiation safety training program using a commercially available videotaped training package. The videotapes are generic in nature and are accompanied with hard copy text material, vu-graphs, quizzes, and an instructor's guide. Sandia's overall training program and the methods, results, and problem areas of implementing an off the shelf, commercially available videotaped training program are described. Results are summarized using an instructor/course/student evaluation form

Summary of inspection findings of licensee inservice testing programs at United States commercial nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Dunlop, A.; Colaccino, J.

1996-12-01

Periodic inspections of pump and valve inservice testing (IST) programs in United States commercial nuclear power plants are performed by Nuclear Regulatory Commission (NRC) Regional Inspectors to verify licensee regulatory compliance and licensee commitments. IST inspections are conducted using NRC Inspection Procedure 73756, {open_quotes}Inservice Testing of Pumps and Valves{close_quotes} (IP 73756), which was updated on July 27, 1995. A large number of IST inspections have also been conducted using Temporary Instruction 2515/114, {open_quotes}Inspection Requirements for Generic Letter 89-04, Acceptable Inservice Testing Programs{close_quotes} (TI-2515/114), which was issued January 15, 1992. A majority of U.S. commercial nuclear power plants have had an IST inspection to either IP 73756 or TI 2515/114. This paper is intended to summarize the significant and recurring findings from a number of these inspections since January of 1990.

Environmental management technology demonstration and commercialization

International Nuclear Information System (INIS)

Daly, D.J.; Erickson, T.A.; Groenewold, G.H.

1995-01-01

The Energy ampersand Environmental Research Center (EERC), a contract-supported organization focused on technology research, development, demonstration, and commercialization (RDD ampersand C), is entering its second year of a Cooperative Agreement with the U.S. Department of Energy (DOE) Morgantown Energy Technology Center (METC) to facilitate the development, demonstration, and commercialization of innovative environmental management (EM) technologies in support of the activities of DOE's Office of Environmental Science and Technology (EM-50) under DOE's EM Program. This paper reviews the concept and approach of the program under the METC-EERC EM Cooperative Agreement and profiles the role the program is playing in the commercialization of five EM technologies

Environmental management technology demonstration and commercialization

Energy Technology Data Exchange (ETDEWEB)

Daly, D.J.; Erickson, T.A.; Groenewold, G.H. [Energy & Environmental Research Center, Grand Forks, ND (United States)] [and others

1995-10-01

The Energy & Environmental Research Center (EERC), a contract-supported organization focused on technology research, development, demonstration, and commercialization (RDD&C), is entering its second year of a Cooperative Agreement with the U.S. Department of Energy (DOE) Morgantown Energy Technology Center (METC) to facilitate the development, demonstration, and commercialization of innovative environmental management (EM) technologies in support of the activities of DOE`s Office of Environmental Science and Technology (EM-50) under DOE`s EM Program. This paper reviews the concept and approach of the program under the METC-EERC EM Cooperative Agreement and profiles the role the program is playing in the commercialization of five EM technologies.

Comparison of the applicability of commercial computer programs to study the thermodynamic stability of metal oxides

International Nuclear Information System (INIS)

Koukkari, P.; Olin, M.; Laitinen, T.; Sippola, H.

1999-04-01

The oxide films formed on primary circuit surfaces incorporate radioactive species from the coolant and influence different corrosion phenomena in nuclear power plants. One approach to improve the understanding on the formation and properties of these oxide films is to evaluate their thermodynamic stability. The aim of this work was to compare and demonstrate the applicability of different commercial thermodynamic computer programs to model the deposition of oxides containing iron, chromium and/or nickel in various nuclear power plant environments. The programs considered in this evaluation comprised the EQ3/6 program and a product group including such products as ChemSage, HSC (including SOLGASMIX and GIBBS), H+PLUS and ChemSheet. In the group the transfer of data between different products is relatively easy. The goal was to find out which programs can be applied to evaluate the stability of oxide films, but not to assess the absolute accuracy of the calculations. The evaluation was done by means of applying the programs to calculate the stability of pure and mixed oxides of iron, nickel and chromium on stainless steel both in WWER and BWR conditions at different temperatures and coolant compositions. The comparison showed that EQ3/6 is suitable for most thermodynamic calculations. EQ3/6 can be characterised as a professional tool, for which no commercial training is available. ChemSage is a versatile and reliable program, which can be well used together with HSC and H+PLUS. ChemSage is mainly a professional tool, while HSC is easier to operate by an occasional user. Commercial training and support is available for both ChemSage and HSC. ChemSheet has been designed to utilise the properties of ChemSage in a user-friendly spreadsheet environment. All the products tested calculate thermodynamic equilibrium. Thus they are suitable to characterise such conditions in which the formation of a certain phase is or becomes possible. On the other hand, the modelling of the

BIOMETRIC STUDY OF COMMERCIAL ALAYING HENS SUBMITTED TO THE PROGRAMS OF FORCED MOLTING BIOMETRIA DO INTESTINO DE POEDEIRAS COMERCIAIS SUBMETIDAS A PROGRAMAS DE MUDA FORÇADA

Directory of Open Access Journals (Sweden)

Lizandra Amoroso

2008-12-01

Full Text Available The forced molting in commercial laying hens had being utilized for get better the performance of birds for one more cycle of production of eggs. The experiment was aimed at evaluating the intestinal biometric parameters in laying hens submitted to the different forced molting program. Third two Hisex Brown laying hen with 58 weeks of age were  randomly subdivided into four programs (P1- California program; P2- diet of low-calcium; T3- diet of high-zinc and P4- diet of low-sodium in two replications constituted of four birds each. The biometric parameters occurred at 28th and 140nd days and for this, four birds were sacrificed of each program in the period cited. The bird corporal weight and the relative weight of the intestine (duodenum, jejunum, ileum, cecum and rectum were obtained on electronic precision scales and the lengths were measured. The data were submitted to the variance analysis and in case of significant difference; the averages were compared by the Tukey´s test. It was observed the commercial laying P1 and P3 the smallest mean body and relative weights (no significant and lengths in relation to the chickens P2 and P4 and to the 140th days the corporal weight, relative weight and length of the intestine of chickens were larger. Concluded that the different programs of forced molting presented similar results and they can be used for commercial laying hens in second production cycle.

KEY WORDS: Digestory system, nutricional manage, physiology, postmolt.
A muda forçada em poedeiras comerciais tem sido utilizada para melhorar o desempenho zootécnico das aves por mais um ciclo de produção de ovos. O experimento foi realizado com o objetivo de avaliar a biometria do intestino de poedeiras comerciais submetidas a diferentes programas de muda forçada. Trinta e duas aves da linhagem Hisex Brown com 58 semanas de idade foram distribuídas em um delineamento inteiramente casualizado, constando de quatro programas de

Surveillance strategy for an extended operating cycle in commercial nuclear reactors

International Nuclear Information System (INIS)

McHenry, R.S.; Moore, T.J.; Maurer, J.H.; Todreas, N.E.

1997-01-01

The impetus for improved economic performance of commercial nuclear power plants can be partially satisfied by increasing plant capacity factors through operating cycle extension. One aspect of an operating cycle extension effort is the modification of plant surveillance programs to complete required regulatory and investment protection surveillance activities within the extended planned outage schedule. The goal of this paper is to introduce a general strategy for existing power plants to transition their surveillance programs to an extended operating cycle up to 48 months in length, and to test the feasibility of this strategy through the complete analysis of the surveillance programs at operating BWR and PWR case study plants. The reconciliation of surveillances at these plants demonstrates that surveillance performance will not preclude 48 month operating cycles. Those surveillance activities that could not be resolved to an extended cycle are identified for further study. Finally, a number of general issues are presented that should be considered before implementing a cycle extension effort

Surveillance strategy for an extended operating cycle in commercial nuclear reactors

International Nuclear Information System (INIS)

McHenry, R.S.; Moore, T.J.; Maurer, J.H.; Todreas, N.E.

1997-01-01

The impetus for improved economic performance of commercial nuclear power plants can be partially satisfied by increasing plant capacity factors through operating cycle extension. One aspect of an operating cycle extension effort is the modification of plant surveillance programs to complete required regulatory and investment protection surveillance activities within the extended planned outage schedule. The goal is to introduce a general strategy for existing power plants to transition their surveillance programs to an extended operating cycle up to 48 months in length, and to test the feasibility of this strategy through the complete analysis of the surveillance programs at operating BWR and PWR case study plants. The reconciliation of surveillances at these plants demonstrates that surveillance performance will not preclude 48 month operating cycles. Those surveillance activities that could not be resolved to an extended cycle are identified for further study. Finally, a number of general issues are presented that should be considered before implementing a cycle extension effort

Determinants of Successful Weight Loss After Using a Commercial Web-Based Weight Reduction Program for Six Months: Cohort Study

OpenAIRE

Postrach, Elisa; Aspalter, Rosa; Elbelt, Ulf; Koller, Michael; Longin, Rita; Schulzke, J?rg-Dieter; Valentini, Luzia

2013-01-01

Background The Internet is widely available and commonly used for health information; therefore, Web-based weight loss programs could provide support to large parts of the population in self-guided weight loss. Previous studies showed that Web-based weight loss interventions can be effective, depending on the quality of the program. The most effective program tools are visual progress charts or tools for the self-monitoring of weight, diet, and exercises. KiloCoach, a commercial program curre...

Generation of Length Distribution, Length Diagram, Fibrogram, and Statistical Characteristics by Weight of Cotton Blends

Directory of Open Access Journals (Sweden)

B. Azzouz

2007-01-01

Full Text Available The textile fibre mixture as a multicomponent blend of variable fibres imposes regarding the proper method to predict the characteristics of the final blend. The length diagram and the fibrogram of cotton are generated. Then the length distribution, the length diagram, and the fibrogram of a blend of different categories of cotton are determined. The length distributions by weight of five different categories of cotton (Egyptian, USA (Pima, Brazilian, USA (Upland, and Uzbekistani are measured by AFIS. From these distributions, the length distribution, the length diagram, and the fibrogram by weight of four binary blends are expressed. The length parameters of these cotton blends are calculated and their variations are plotted against the mass fraction x of one component in the blend .These calculated parameters are compared to those of real blends. Finally, the selection of the optimal blends using the linear programming method, based on the hypothesis that the cotton blend parameters vary linearly in function of the components rations, is proved insufficient.

NASA's Commercial Crew Program, The Next Step in U.S. Space Transportation

Science.gov (United States)

Mango, Edward J.; Thomas, Rayelle E.

2013-01-01

The Commercial Crew Program (CCP) is leading NASA's efforts to develop the next U.S. capability for crew transportation and rescue services to and from the International Space Station (ISS) by the mid-decade timeframe. The outcome of this capability is expected to stimulate and expand the U.S. space transportation industry. NASA is relying on its decades of human space flight experience to certify U.S. crewed vehicles to the ISS and is doing so in a two phase certification approach. NASA Certification will cover all aspects of a crew transportation system, including development, test, evaluation, and verification; program management and control; flight readiness certification; launch, landing, recovery, and mission operations; sustaining engineering and maintenance/upgrades. To ensure NASA crew safety, NASA Certification will validate technical and performance requirements, verify compliance with NASA requirements, validate the crew transportation system operates in appropriate environments, and quantify residual risks.

Commercialism in Intercollegiate Athletics.

Science.gov (United States)

Delany, James E.

1997-01-01

Outlines the history of intercollegiate athletics and the evolution of commercialization in college sports, particularly through television. Argues that few Division I programs could be self-sufficient; the issue is the degree to which sports are commercialized for revenue, and the challenge to balance schools' needs, private sector interests, and…

Systems engineering approach to U.S. Department of Energy's commercial nuclear waste transportation program

International Nuclear Information System (INIS)

Pardue, W.M.

1987-01-01

The U.S Department of Energy (DOE) has been given the responsibility of developing a program to transport commercially produced spent nuclear fuel and high-level radioactive wastes to disposal sites or storage facilities safely and cost-effectively. To accomplish this task it is desirable to plan, perform, and document all technical activities based on systems engineering principles. This paper presents an overview of the systems engineering approach being developed by Battelle for consideration by DOE, specifically the early identification of the required technical activities and approaches to technical management and decision making. The program should support the development of an integrated, well-documented transportation system acceptable to regulatory agencies and the public

Commercial incineration demonstration

International Nuclear Information System (INIS)

Borduin, L.C.; Neuls, A.S.

1981-01-01

Low-level radioactive wastes (LLW) generated by nuclear utilities presently are shipped to commercial burial grounds for disposal. Substantially increasing shipping and disposal charges have sparked renewed industry interest in incineration and other advanced volume reduction techniques as potential cost-saving measures. Repeated inquiries from industry sources regarding LLW applicability of the Los Alamos controlled-air incineration (CAI) design led DOE to initiate this commercial demonstration program in FY-1980. The selected program approach to achieving CAI demonstration at a utility site is a DOE sponsored joint effort involving Los Alamos, a nuclear utility, and a liaison subcontractor. Required development tasks and responsibilities of the particpants are described. Target date for project completion is the end of FY-1985

United States Department of Energy commercial reactor spent fuel programs being conducted at the Idaho National Engineering Laboratory

International Nuclear Information System (INIS)

Piscitella, R.R.; Rasmussen, T.L.; Uhl, D.L.

1987-01-01

The Idaho National Engineering Laboratory participation in OCRWM programs includes the Spent Fuel Storage Cask Testing Program, Dry Rod Consolidation Technology Program, Prototypical Consolidation Demonstration Program, the Nuclear Fuel Services Project, and the Cask Systems Acquisition Program. The DOE has entered into a cooperative agreement with Virginia Power and the Electric Power Research Institute to demonstrate storage of commercial spent fuel in steel storage casks. The Program conducted heat transfer and shielding tests with three storage casks with intact spent fuel assemblies and two casks with consolidated spent fuel rods, one of which was previously tested with intact fuel, and provides test information in support of Virginia Power's at-reactor dry storage licensing effort. 3 figs., 1 tab

Commercial low-level radioactive waste management

International Nuclear Information System (INIS)

Coleman, J.A.

1982-01-01

The goals, objectives and activities of the Department of Energy's Low-Level Radioactive Waste Management program are reviewed. The goal of the overall Program is to support development of an acceptable, nationwide, near surface waste disposal system by 1986. The commercial LLW program has two major functions: (1) application of the technology improvements for waste handling, treatment and disposal, and (2) assistance to states as they carry out their responsibilities under the Low-Level Radioactive Waste Policy Act of 1980. The priorities for the commercial side of the Low-Level Waste Management Program have been established to meet one goal: to support development of an effective commercial management system by 1986. The first priority is being given to supporting state efforts in forming the institutional structures needed to manage the system. The second priority is the state and industry role in transferring and demonstrating treatment and disposal technologies

Commercialization of DOE isotope production

International Nuclear Information System (INIS)

Laflin, S.

1997-01-01

This paper describes the business structure and operations of MAC Isotopes (MACI) L.L.C., a newly created business resulting from the commercialization of a former U.S. Department of Energy (DOE) mission at the Idaho National Engineering and Environmental Laboratory (INEEL). MACI began its commercial operations on October 1, 1996, and is the first U.S. commercial isotope production business to result from the commercialization of DOE facilities or programs. The commercialization was the culmination of an -2-yr competitive procurement process by the DOE and Lockheed Martin Idaho Technologies Company (LMITCO). MACI was selected from this competitive process as the commercial business of choice on the basis of providing the best value to the DOE/LMITCO and having the greatest potential for commercial success

ORNL superconducting technology program for electric energy systems

Science.gov (United States)

Hawsey, R. A.

1993-02-01

The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy's (DOE's) Office of Conservation and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and systems development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY-92 Peer Review of Projects, which was conducted by DOE's Office of Program Analysis, Office of Energy Research. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer to US industry. Working together, the collaborative teams are making tremendous progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

High-performance commercial building systems

Energy Technology Data Exchange (ETDEWEB)

Selkowitz, Stephen

2003-10-01

This report summarizes key technical accomplishments resulting from the three year PIER-funded R&D program, ''High Performance Commercial Building Systems'' (HPCBS). The program targets the commercial building sector in California, an end-use sector that accounts for about one-third of all California electricity consumption and an even larger fraction of peak demand, at a cost of over $10B/year. Commercial buildings also have a major impact on occupant health, comfort and productivity. Building design and operations practices that influence energy use are deeply engrained in a fragmented, risk-averse industry that is slow to change. Although California's aggressive standards efforts have resulted in new buildings designed to use less energy than those constructed 20 years ago, the actual savings realized are still well below technical and economic potentials. The broad goal of this program is to develop and deploy a set of energy-saving technologies, strategies, and techniques, and improve processes for designing, commissioning, and operating commercial buildings, while improving health, comfort, and performance of occupants, all in a manner consistent with sound economic investment practices. Results are to be broadly applicable to the commercial sector for different building sizes and types, e.g. offices and schools, for different classes of ownership, both public and private, and for owner-occupied as well as speculative buildings. The program aims to facilitate significant electricity use savings in the California commercial sector by 2015, while assuring that these savings are affordable and promote high quality indoor environments. The five linked technical program elements contain 14 projects with 41 distinct R&D tasks. Collectively they form a comprehensive Research, Development, and Demonstration (RD&D) program with the potential to capture large savings in the commercial building sector, providing significant economic benefits to

Spent Fuel Handling and Packaging Program: a survey of hot cell facilities

International Nuclear Information System (INIS)

Menon, M.N.

1978-07-01

Hot cell facilities in the United States were surveyed to determine their capabilities for conducting integral fuel assembly and individual fuel rod examinations that are required in support of the Spent Fuel Handling and Packaging Program. The ability to receive, handle, disassemble and reconstitute full-length light water reactor spent fuel assemblies, and the ability to conduct nondestructive and destructive examinations on full-length fuel rods were of particular interest. Three DOE-supported facilities and three commercial facilities were included in the survey. This report provides a summary of the findings

Commercial Landing System

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Fisheries Statistics Division of the NOAA Fisheries has automated data summary programs that anyone can use to rapidly and easily summarize U.S. commercial...

American commercial nuclear power industry programs, work processes, and organizational changes

International Nuclear Information System (INIS)

Reynerson, D.M.

1995-01-01

The American electric utility industry is undergoing a continuing series of regulatory and commercial changes unprecedented in the recent history of the industry. The changes are resulting in an industrywide examination of all facets of the business including the arena of operations and maintenance costs in conjunction with the nuclear facilities. The very viability of most nuclear facilities to a large extent depends on the effective implementation of program, process, and organizational reviews. These reviews, in one form or another, are under way at a number of facilities sometimes as a open-quotes stand-alone activityclose quotes and as often as not as a portion of a corporate and firmwide initiative. The impetus is coming from the marketplace, and both major challenges and opportunities are encompassed by the changes

Evaluation of genetic diversity in jackfruit (Artocarpus heterophyllus Lam.) based on amplified fragment length polymorphism markers.

Science.gov (United States)

Shyamalamma, S; Chandra, S B C; Hegde, M; Naryanswamy, P

2008-07-22

Artocarpus heterophyllus Lam., commonly called jackfruit, is a medium-sized evergreen tree that bears high yields of the largest known edible fruit. Yet, it has been little explored commercially due to wide variation in fruit quality. The genetic diversity and genetic relatedness of 50 jackfruit accessions were studied using amplified fragment length polymorphism markers. Of 16 primer pairs evaluated, eight were selected for screening of genotypes based on the number and quality of polymorphic fragments produced. These primer combinations produced 5976 bands, 1267 (22%) of which were polymorphic. Among the jackfruit accessions, the similarity coefficient ranged from 0.137 to 0.978; the accessions also shared a large number of monomorphic fragments (78%). Cluster analysis and principal component analysis grouped all jackfruit genotypes into three major clusters. Cluster I included the genotypes grown in a jackfruit region of Karnataka, called Tamaka, with very dry conditions; cluster II contained the genotypes collected from locations having medium to heavy rainfall in Karnataka; cluster III grouped the genotypes in distant locations with different environmental conditions. Strong coincidence of these amplified fragment length polymorphism-based groupings with geographical localities as well as morphological characters was observed. We found moderate genetic diversity in these jackfruit accessions. This information should be useful for tree breeding programs, as part of our effort to popularize jackfruit as a commercial crop.

47 CFR 73.670 - Commercial limits in children's programs.

Science.gov (United States)

2010-10-01

... for commercial purposes, including either e-commerce or advertising; (3) The Web site's home page and...-commerce, advertising, or other commercial purposes (e.g., contains no links labeled “store” and no links... produced and broadcast primarily for an audience of children 12 years old and younger. [70 FR 36, Jan. 3...

Issues in the commercialization of magnetic fusion power

International Nuclear Information System (INIS)

Rockwood, A.D.; Willke, T.L.

1979-12-01

This study identifies and outlines the issues that must be considered if fusion is to be put into commercial practice. The issues are put into perspective around a consistent framework and a program of study and research is recommended to anticipate and handle the issues for a successful fusion commercialization program

A Commercially Available Portion-Controlled Diet Program Is More Effective for Weight Loss than a Self-Directed Diet: Results from a Randomized Clinical Trial

Directory of Open Access Journals (Sweden)

Chad M. Cook

2017-11-01

Full Text Available ObjectiveTo examine changes in weight and related outcomes in response to a commercial weight loss program compared to a self-directed diet in adults with overweight or obesity.DesignParticipants were randomly assigned [stratified by body mass index (BMI and age] to a commercial weight loss program (n = 38 or to a self-directed Dietary Approaches to Stop Hypertension (DASH diet (n = 40 for a 16-week period. Daily energy intake goals were 1,500 kcal/d for men and 1,200 kcal/d for women, except for the first week of the commercial program (1,000 kcal/d. This study was registered at http://ClinicalTrials.gov (NCT03017443.ParticipantsPrimarily Caucasian (71% women (n = 61 and men (n = 17 from the greater metropolitan area of the city of Chicago, IL, USA. with a mean baseline BMI of 34.4 kg/m2, body weight of 95.7 kg, and age of 50.4 years.ResultsData = mean (95% CI. At week 16, the commercial program group lost significantly more body weight [−5.9 (−7.5, −4.3 kg vs. −1.8 (−2.9, −0.8 kg; or −6.4 vs. −1.8% of initial body weight, respectively], fat mass [−4.4 (−5.7, −3.1 kg vs. −1.2 (−2.1, −0.4 kg] and total body circumference (chest + waist + hip + upper arm + thigh [−16.9 (−21.5, −12.3 cm vs. −5.8 (−9.0, −2.6 cm] (p < 0.01 for all. Additionally, more participants in the commercial program group lost a clinically meaningful amount of weight, defined as ≥5% of initial body weight, at week 16 (58% vs. 13%, p < 0.001.ConclusionThe commercial program resulted in greater weight loss and improvements in body composition/anthropometric parameters compared to a self-directed DASH diet over a 16-week period. Some important limitations were that no objective measurements of dietary intake or physical activity were collected to potentially ascertain the independent or combined effects of these components on weight loss (or lack thereof. Additionally, future

A 12-week commercial web-based weight-loss program for overweight and obese adults: randomized controlled trial comparing basic versus enhanced features.

Science.gov (United States)

Collins, Clare E; Morgan, Philip J; Jones, Penelope; Fletcher, Kate; Martin, Julia; Aguiar, Elroy J; Lucas, Ashlee; Neve, Melinda J; Callister, Robin

2012-04-25

The development and use of Web-based programs for weight loss is increasing rapidly, yet they have rarely been evaluated using randomized controlled trials (RCTs). Interestingly, most people who attempt weight loss use commercially available programs, yet it is very uncommon for commercial programs to be evaluated independently or rigorously. To compare the efficacy of a standard commercial Web-based weight-loss program (basic) versus an enhanced version of this Web program that provided additional personalized e-feedback and contact from the provider (enhanced) versus a wait-list control group (control) on weight outcomes in overweight and obese adults. This purely Web-based trial using a closed online user group was an assessor-blinded RCT with participants randomly allocated to the basic or enhanced 12-week Web-based program, based on social cognitive theory, or the control, with body mass index (BMI) as the primary outcome. We enrolled 309 adults (129/309, 41.8% male, BMI mean 32.3, SD 4 kg/m(2)) with 84.1% (260/309) retention at 12 weeks. Intention-to-treat analysis showed that both intervention groups reduced their BMI compared with the controls (basic: -0.72, SD 1.1 kg/m(2), enhanced: -1.0, SD 1.4, control: 0.15, SD 0.82; P 3.0, SD 4.1, control: 0.4, SD 2.3; P 3.0; P Web-based weight-loss program can be efficacious across a range of weight-related outcomes and lifestyle behaviors and achieve clinically important weight loss. Although the provision of additional personalized feedback did not facilitate greater weight loss after 12 weeks, the impact of superior participant retention on longer-term outcomes requires further study. Further research is required to determine the optimal mix of program features that lead to the biggest treatment impact over time. Australian New Zealand Clinical Trials Registry (ANZCTR): 12610000197033.

Bonneville Power Administration`s Commercial Sector Conservation Market.

Energy Technology Data Exchange (ETDEWEB)

Gordan, Frederick M. [Pacific Energy Associates, Inc. (United States)

1992-11-10

Bonneville has, as part of its resource plan, accepted targets for commercial conservation which are quite ambitious. To meet these targets, Bonneville will need to acquire as much cost-effective conservation as possible over the next twelve years. With this in mind, this document explores the relative importance of different commercial market segments and the types of assistance each market needs to install as many cost-effective conservation measures in as many buildings as possible. This document reviews Bonneville`s marketing environment and position, and suggests goals for commercial sector conservation marketing at Bonneville. Then it presents a broad market segmentation and series of additional demographic analyses. These analyses assess what groups of consumers Bonneville must reach to achieve most of the commercial conservation potential and what is needed to reach them. A final section reviews the success of Bonneville programs at reaching various markets. The market segmentation identifies different types of consumers and opportunities which would require distinct program approaches. Four large market segments are identified that have distinct program needs. Then four ``building life-cycle events`` are identified which provide important conservation opportunities and also require distinct program services. This creates a matrix of 16 cells which delineate distinct needs for program marketing. Each of the four key market segments manages at least 20% of the Region`s commercial floorspace.

Issues in the commercialization of magnetic fusion power

Energy Technology Data Exchange (ETDEWEB)

Rockwood, A.D.; Willke, T.L.

1979-12-01

This study identifies and outlines the issues that must be considered if fusion is to be put into commercial practice. The issues are put into perspective around a consistent framework and a program of study and research is recommended to anticipate and handle the issues for a successful fusion commercialization program. (MOW)

Characterization of changes in commercial building structure, equipment, and occupants: End-Use Load and Consumer Assessment Program

Energy Technology Data Exchange (ETDEWEB)

Lucas, R.G.; Taylor, Z.T.; Miller, N.E.; Pratt, R.G.

1990-12-01

Changes in commercial building structure, equipment, and occupants result in changes in building energy use. The frequency and magnitude of those changes have substantial implications for conservation programs and resource planning. For example, changes may shorten the useful lifetime of a conservation measure as well as impact the savings from that measure. This report summarizes the frequency of changes in a commercial building sample that was end-use metered under the End-Use Load and Consumer Assessment Program (ELCAP). The sample includes offices, dry good retails, groceries, restaurants, warehouses, schools, and hotels. Two years of metered data, site visit records, and audit data were examined for evidence of building changes. The observed changes were then classified into 12 categories, which included business type, equipment, remodel, vacancy, and operating schedule. The analysis characterized changes in terms of frequency of types of change; relationship to building vintage and floor area; and variation by building type. The analysis also examined the energy impacts of various changes. The analysis determined that the rate of change in commercial buildings is high--50% of the buildings experienced one type of change during the 2 years for which monitoring data were examined. Equipment changes were found to be most frequent in offices and retail stores. Larger, older office buildings tend to experience a wider variety of changes more frequently than the smaller, newer buildings. Key findings and observations are presented in Section 2. Section 3 provides the underlying motivation and objectives. In Section 4, the methodology used is documented, including the commercial building sample and the data sources used. Included are the definitions of change events and the overall approach taken. Results are analyzed in Section 5, with additional technical details in Appendixes. 2 refs., 46 figs., 22 tabs. (JF)

Boys to Men: Sports Media. Messages about Masculinity: A National Poll of Children, Focus Groups, and Content Analysis of Sports Programs and Commercials.

Science.gov (United States)

Messner, Mike; Hunt, Darnell; Dunbar, Michele; Chen, Perry; Lapp, Joan; Miller, Patti

Sports programming plays a significant role in the media messages that American boys receive today. To explore the messages that sports programming presents to its audience, this report relates the findings of a study that analyzed a representative selection of sports programs and their accompanying commercials; also presented are findings from a…

Intertechnology Corporation proposed test and evaluation plan, commercial buildings. National Solar Demonstration Program

Energy Technology Data Exchange (ETDEWEB)

None

1976-09-01

This report has three major parts. The first of these derives the requirements for the Test and Evaluation plan from the System Level Plan which is summarized in Section II. The second part contains the proposed plan to fill these requirements and includes hardware and software recommendations as well as procedures and management considerations. Primary emphasis has been given to the remote site because this is the area in which the commercial part of the demonstration is most unique. Finally, some pre-demonstration activities are described. The pilot program is intended to resolve a number of issues which arose in the course of the T and E plan. These relate to choice of scan frequencies, compression algorithms, etc. It is also intended to confirm performance and cost effectiveness of the site data collection package. The base line measurements of attitudes, etc. provide a reference mark against which one can measure the non-technical effectiveness of the demonstration program. (WDM)

General Electric Company proposed test and evaluation plan, commercial buildings. National Solar Demonstration Program

Energy Technology Data Exchange (ETDEWEB)

None

1976-04-01

The general requirements and methods for instrumenting, testing, and evaluating solar HVAC systems forming a part of ERDA's ''Commercial Demonstration Program'' commensurate with ERDA 23A and the Proposed Management Plan 75SDS4270 are defined. Design requirements are specified for the performance of components and subsystems comprising the instrumentation and data gathering system, as well as the support functions required to perform the diagnostic measurements, collection and processing of data, and documentation of reports on solar HVAC system performance, including economic and societal evaluations.

All-fiber, long-active-length Fabry-Perot strain sensor.

Science.gov (United States)

Pevec, Simon; Donlagic, Denis

2011-08-01

This paper presents a high-sensitivity, all-silica, all-fiber Fabry-Perot strain-sensor. The proposed sensor provides a long active length, arbitrary length of Fabry-Perot cavity, and low intrinsic temperature sensitivity. The sensor was micro-machined from purposely-developed sensor-forming fiber that is etched and directly spliced to the lead-in fiber. This manufacturing process has good potential for cost-effective, high-volume production. Its measurement range of over 3000 µε, and strain-resolution better than 1 µε were demonstrated by the application of a commercial, multimode fiber-based signal processor.

ORNL superconducting technology program for electric power systems

Science.gov (United States)

Hawsey, R. A.

1994-04-01

The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy's Office of Energy Efficiency and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are conductor development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1993 Annual Program Review held July 28--29, 1993. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to industrial competitiveness projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer to US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

Commercialization of the British Extension Service: An American View.

Science.gov (United States)

Harter, Don

1993-01-01

Britain's decision to commercialize the Agricultural Development and Advisory Service has implications for extension programs in other countries. If programs now offered were commercialized, extension would no longer be an agency responsive to the public interest as a whole but would be driven by interests of paying clients. (JOW)

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IV. Commercial potential

Energy Technology Data Exchange (ETDEWEB)

1980-06-01

This volume of the Nonproliferation Alternative Systems Assessment Program (NASAP) report provides time and cost estimates for positioning new nuclear power systems for commercial deployment. The assessment also estimates the rates at which the new systems might penetrate the domestic market, assuming the continuing viability of the massive light-water reactor network that now exists worldwide. This assessment does not recommend specific, detailed program plans and budgets for individual systems; however, it is clear from this analysis that any of the systems investigated could be deployed if dictated by national interest.

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IV. Commercial potential

International Nuclear Information System (INIS)

1980-06-01

This volume of the Nonproliferation Alternative Systems Assessment Program (NASAP) report provides time and cost estimates for positioning new nuclear power systems for commercial deployment. The assessment also estimates the rates at which the new systems might penetrate the domestic market, assuming the continuing viability of the massive light-water reactor network that now exists worldwide. This assessment does not recommend specific, detailed program plans and budgets for individual systems; however, it is clear from this analysis that any of the systems investigated could be deployed if dictated by national interest

Commercialization of PV-powered pumping systems for use in utility PV service programs. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The project described in this report was a commercialization effort focused on cost-effective remote water pumping systems for use in utility-based photovoltaic (PV) service programs. The project combined a commercialization strategy tailored specifically for electric utilities with the development of a PV-powered pumping system that operates conventional ac pumps rather than relying on the more expensive and less reliable PV pumps on the market. By combining these two attributes, a project goal was established of creating sustained utility purchases of 250 PV-powered water pumping systems per year. The results of each of these tasks are presented in two parts contained in this Final Summary Report. The first part summarizes the results of the Photovoltaic Services Network (PSN) as a new business venture, while the second part summarizes the results of the Golden Photon system installations. Specifically, results and photographs from each of the system installations are presented in this latter part.

NRC Task Force report on review of the federal/state program for regulation of commercial low-level radioactive waste burial grounds

International Nuclear Information System (INIS)

1977-01-01

The underlying issue explored in this report is that of Federal vs State regulation of commercial radioactive waste burial grounds. The need for research and development, a comprehensive set of standards and criteria, a national plan for low-level waste management, and perpetual care funding are closely related to the central issue and are also discussed. Five of the six commercial burial grounds are regulated by Agreement States; the sixth is regulated solely by the NRC (NRC also regulates Special Nuclear Material at the sites). The sites are operated commercially. The operators contribute to the perpetual care funds for the sites at varying rates. The States have commitments for the perpetual care of the decommissioned sites except for one site, located on Federally owned land. Three conclusions are reached. Federal control over the disposal of low-level waste should be increased by requiring joint Federal/State site approval, NRC licensing, Federal ownership of the land, and a Federally administered perpetual care program. The NRC should accelerate the development of its regulatory program for the disposal of low-level waste. The undisciplined proliferation of low-level burial sites must be avoided. NRC should evaluate alternative disposal methods, conduct necessary studies, and develop a comprehensive low-level waste regulatory program (i.e., accomplish the above recommendations) prior to the licensing of new disposal sites

The School Marketplace: Has Commercialization Gone Too Far?

Science.gov (United States)

Wohl, Alexander

2001-01-01

Discusses the pros and cons of commercial activity in the schools, explaining that while schools always need the added support, the result is that students are bombarded with commercial messages. Commercial activity includes direct advertising, product sales/incentive programs, and indirect advertising. Discusses the importance of ensuring that…

Rationalization and Internal Control: Improving Marine Corps Unit-Level Internal Management Controls for the Government-Wide Commercial Purchase Card Program

National Research Council Canada - National Science Library

Wood, Lewis

2003-01-01

... Commercial Purchase Card (GCPC) Program for the first half of fiscal year (FY) 2003, led the author of this article to review GCPC usage in the Marine Corps as the basis for a Naval Postgraduate School Master of Business Administration thesis...

Commercial Art: Scope and Sequence.

Science.gov (United States)

Nashville - Davidson County Metropolitan Public Schools, TN.

This scope and sequence guide, developed for a commercial art vocational education program, represents an initial step in the development of a systemwide articulated curriculum sequence for all vocational programs within the Metropolitan Nashville Public School System. It was developed as a result of needs expressed by teachers, parents, and the…

Use of commercial grade item dedication to reduce procurement costs

International Nuclear Information System (INIS)

Rosch, F.

1995-01-01

In the mid-1980s, the Nuclear Regulatory Industry (NRC) began inspecting utility practices of procuring and dedicating commercial grade items intended for plant safety-related applications. As a result of the industry efforts to address NRC concerns, nuclear utilities have enhanced existing programs and procedures for dedication of commercial grade items. Though these programs were originally enhanced to meet NRC concerns, utilities have discovered that the dedication of commercial grade items can also reduce overall procurement costs. This paper will discuss the enhancement of utility dedication programs and demonstrates how utilities have utilized them to reduce procurement costs

The Battle over Commercialized Schools

Science.gov (United States)

Molnar, Alex; Garcia, David

2006-01-01

For the last 15 years, the Education Policy Studies Laboratory has studied trends in schoolhouse commercialism and has found that this practice is increasingly pervasive and diverse. The manifestations of marketing in public schools include incentive programs, such as Pizza Hut's "Book It!" program; contracts that grant soft drink and junk food…

Referral to a Commercial Weight Management Program in Patients With Coronary Heart Disease: A PILOT STUDY IN THE NETHERLANDS

NARCIS (Netherlands)

Minneboo, Madelon; Peters, Ron J. G.; Miller-Kovach, Karen; Lemmens, Jeanine; Bucx, Jeroen J. J.

2015-01-01

To quantify the impact of a commercial weight management program on weight change in obese patients with coronary heart disease. An observational, single-center pilot study in the Netherlands. Forty-five patients diagnosed with a recent acute coronary syndrome and a body mass index of >30 kg/m2 were

First-trimester risk calculation for trisomy 13, 18, and 21: comparison of the screening efficiency between 2 locally developed programs and commercial software

DEFF Research Database (Denmark)

Sørensen, Steen; Momsen, Günther; Sundberg, Karin

2011-01-01

-A) in maternal plasma from unaffected pregnancies. Means and SDs of these parameters in unaffected and affected pregnancies are used in the risk calculation program. Unfortunately, our commercial program for risk calculation (Astraia) did not allow use of local medians. We developed 2 alternative risk...... calculation programs to assess whether the screening efficacies for T13, T18, and T21 could be improved by using our locally estimated medians....

No effect of embryo culture media on birthweight and length of newborns.

Science.gov (United States)

Lin, Shengli; Li, Ming; Lian, Ying; Chen, Lixue; Liu, Ping

2013-07-01

Does the type of media used to culture embryos for IVF influence the birthweight and length of neonates? No significant differences were observed in birthweight and length among the three embryo culture media used for in vitro embryo culture. Since the establishment of IVF as an assisted reproductive technology (ART), many different culture systems have been used for the development of human embryos. Some studies have shown that the types of culture media influence the newborn birthweight; however, other studies have shown no effect. To further explore this contradictory issue, we compared the birthweight and length of neonates born after the transfer of embryos cultured in one of three commercially available media. This retrospective analysis of birthweight and length of newborns included 1201 women who delivered singletons and 445 women who delivered twins. The following three commercially available culture media were used: G5™, Global and Quinn's advantage media. Women who underwent IVF-ET cycles between 2008 and 2010 were analyzed. Patients younger than 40 years of age with a body mass index (BMI) culture medium. Inter-twin mean birthweight and length disparities were analyzed, but were not shown to be significantly different. Multiple linear regression analysis showed that maternal weight, maternal height, gestational age and infant gender were significantly related to birthweight, and paternal height, gestational age and newborn complications were significantly associated with birth length. The current study showed that birthweight and length of newborns were not associated with the embryo culture medium. More research needs to be performed to analyze the effects of other culture medium formulations and to evaluate the long-term effects of embryo culture medium on the health of children conceived through ART. WIDER IMPLICATIONS OF THESE FINDINGS: Our retrospective study suggests that embryo culture medium does not influence neonatal birthweight and length

Problems of intangible assets commercialization accounting

Directory of Open Access Journals (Sweden)

S.F. Legenchyk

2016-03-01

Full Text Available The growing role of intangible assets in conditions of global economy postindustrialization is grounded. The problems of intangible assets accounting are singled out. The basic tasks of the intangible assets accounting commercialization process are determined. The difference between the commercialization of intellectual property and intangible assets is considered. The basic approaches to understanding the essence of the intangible assets commercialization are singled out and grounded. The basic forms and methods of intangible assets commercialization researched by the author are analyzed. The order of accounting reflection of licensee royalties is considered. The factors of influence on the accounting process of intangible assets commercialization are determined. The necessity of solving the problem of accounting of lease payments for computer program by providing access to SaaS environment is grounded. The prospects of further studies of intangible assets accounting commercialization are determined.

Length-weight relationships for 13 fish species from the Gulf of ...

African Journals Online (AJOL)

Length-weight relationships (LWR) were estimated for 13 fish species which are of economic relevance in the commercial fisheries of the Gulf of Gabes (southern Tunisia). A total of 2403 fish specimens were sampled with several fishing gears from October 2008 to September 2009. The sample size ranged from 65 ...

United States program for the safety assessment of geologic disposal of commercial radioactive wastes

International Nuclear Information System (INIS)

Claiborne, H.C.

1977-01-01

The safe disposal of commercial radioactive wastes in deep geologic formations is the goal of the National Waste Terminal Storage (NWTS) Program. A comprehensive safety assessment program has been established which will proceed on a schedule consistent with the start-up of two waste repositories in late 1985. Safety assessment begins with selection of a disposal site; that is, all geologic and hydrologic factors must indicate long-term stability of the formation and prospective isolation of wastes from circulating around waters for hundreds of thousands of years. The long-term stability of each site must be demonstrated by sophisticated rock mechanics analyses. To help provide answers on the mechanism and consequences of an unlikely breach in the integrity of the repository, a Waste Isolation Safety Assessment Program (WISAP) is being sponsored at the Battelle Pacific Northwest Laboratories. Methods and data necessary to characterize the safety of generic geological waste disposal concepts, which are to be applied in the assessment of specific sties, will be developed. Other long-term safety-related studies that complement WISAP are in progress, for example, borehole plugging, salt dissolutioning, and salt transport in vertical boreholes. Requirements for licensing are in the process of being formulated by the NRC

ENERGY STAR Certified Commercial Dishwashers

Data.gov (United States)

U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 2.0 ENERGY STAR Program Requirements for Commercial Dishwashers that are effective as of...

ENERGY STAR Certified Commercial Ovens

Data.gov (United States)

U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 2.2 ENERGY STAR Program Requirements for Commercial Ovens that are effective as of...

ENERGY STAR Certified Commercial Boilers

Data.gov (United States)

U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 1.0 ENERGY STAR Program Requirements for Commercial Boilers that are effective as of...

ENERGY STAR Certified Commercial Fryers

Data.gov (United States)

U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 3.0 ENERGY STAR Program Requirements for Commercial Fryers that are effective as of...

Lessons Learned: A review of utility experience with conservation and load management programs for commercial and industrial customers

Energy Technology Data Exchange (ETDEWEB)

Nadel, S.

1990-10-01

This report examines utility experience with conservation and load management (C LM) programs of commercial and industrial (C I) customers in order to summarize the lessons learned from program experiences to date and what these teach us about how to operate successful programs in the future. This analysis was motivated by a desire to learn about programs which achieve high participation rates and high electricity savings while remaining cost effective. Also, we wanted to review the very latest experiences with innovative program approaches -- approaches that might prove useful to utilities as they scale up their C LM activities. Specific objectives of this phase of the study are threefold: (1) To disseminate information on utility C LM experience to a nationwide audience. (2) To review current New York State utility programs and make suggestions on how these programs can be improved. (3) To collect data for the final phase of the American Council for an Energy-Efficient Economy/New York State Energy Research and Development Authority project, which will examine the savings that are achievable if C LM programs are pushed to the limit'' of current knowledge on how to structure and run cost-effective C LM programs. 19 tabs.

Commercial and ERDA waste packaging criteria: possible similarities and differences

International Nuclear Information System (INIS)

Lowrie, B.

1977-01-01

The schedule calls for hot operation of two waste repositories by the end of 1985, and these facilities will have to be licensed. This licensing requirement sets the commercial program apart from the ERDA defense waste program. Packaging criteria are discussed for commercial and ERDA wastes. The different NRC, DOT, and EPA criteria are considered

ENERGY STAR Certified Commercial Griddles

Data.gov (United States)

U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 1.2 ENERGY STAR Program Requirements for Commercial Griddles that are effective as of May...

Sidebar- Programming Commercial Robots

OpenAIRE

Matellán Olivera, Vicente; McDonal, Bruce; Biggs, Geoffrey; Cañas, José María

2007-01-01

P. 125-132 Manual systems require the user/programmer to directly enter the desired behaviour of the robot, usually using a graphical or text-based programming language, as shown in Fig. 1. Text-based systems are either controller-specific languages, generic procedural languages, or behavioural languages, which typically differ by the flexibility and method of expression of the system. Graphical languages [BKS02, BI01] use a graph, flow-chart or diagram based graphical interface...

77 FR 72763 - Energy Conservation Program: Certification of Commercial and Industrial HVAC, Refrigeration and...

Science.gov (United States)

2012-12-06

... Commercial and Industrial HVAC, Refrigeration and Water Heating Equipment AGENCY: Office of Energy Efficiency...; commercial heating, ventilating, air-conditioning (HVAC) equipment; and commercial water heating equipment... refrigeration equipment; commercial HVAC equipment; commercial WH equipment; and walk-in coolers and freezers...

Marketing demand management in the commercial sector

International Nuclear Information System (INIS)

Fraser, M.E.

1990-01-01

Ontario Hydro has a marketing strategy for designing and implementing demand side management (DSM) programs, which marks a turnaround from previous years when marketing efforts were concentrated on selling electricity. Starting in the 1980s, marketing activities consisted, in effect, of coordinating relations between the customer, the market, and the utility. To achieve a better understanding of the needs of customers, the nature of the energy market, and the utilization of energy, the utility conducted research on the decision-making process associated with consumer choices of energy systems. To develop relations with its clientele in the commercial sector, the utility published an information bulletin and prepared an energy guide. Along with this initiative, the number of energy advisers to the commercial sector was increased in Ontario Hydro's regional offices. To improve understanding of each segment of the commercial market, the utility contacted organizations representing each segment as well as broader based organizations with the objective of creating opportunities to address this market, for example at conferences. Because of this philosophy of satisfying and understanding customer needs, Ontario Hydro has been in the process of commercializing demand-side management. Its high-efficiency lighting program is a good example in this regard. From a strategy which focused on a simple reduction in lighting in the 1970s, the utility has turned toward promoting efficient high-quality lighting which better responds to industry needs, to the point where industry itself has begun to promote the program. Such a strategy benefits industry, customers, and Ontario Hydro's demand-side management programs

Commercial radioactive waste minimization program development guidance

International Nuclear Information System (INIS)

Fischer, D.K.

1991-01-01

This document is one of two prepared by the EG ampersand G Idaho, Inc., Waste Management Technical Support Program Group, National Low-Level Waste Management Program Unit. One of several Department of Energy responsibilities stated in the Amendments Act of 1985 is to provide technical assistance to compact regions Host States, and nonmember States (to the extent provided in appropriations acts) in establishing waste minimization program plans. Technical assistance includes, among other things, the development of technical guidelines for volume reduction options. Pursuant to this defined responsibility, the Department of Energy (through EG ampersand G Idaho, Inc.) has prepared this report, which includes guidance on defining a program, State/compact commission participation, and waste minimization program plans

Genetic characterization of commercial honey bee (Hymenoptera: Apidae) populations in the United States by using mitochondrial and microsatellite markers

Science.gov (United States)

D. A. Delaney; M.D. Meixner; N.M. Schiff; W.S. Sheppard

2009-01-01

Genetic diversity levels within and between the two commercial breeding areas in theUnited States were analyzed using the DraI restriction fragment length polymorphism of the COICOII mitochondrial region and 10 polymorphic microsatellite loci. The western commercial breeding population (WCBP) and the southeastern commercial...

Commercial Building Partnerships Replication and Diffusion

Energy Technology Data Exchange (ETDEWEB)

Antonopoulos, Chrissi A.; Dillon, Heather E.; Baechler, Michael C.

2013-09-16

This study presents findings from survey and interview data investigating replication efforts of Commercial Building Partnership (CBP) partners that worked directly with the Pacific Northwest National Laboratory (PNNL). PNNL partnered directly with 12 organizations on new and retrofit construction projects, which represented approximately 28 percent of the entire U.S. Department of Energy (DOE) CBP program. Through a feedback survey mechanism, along with personal interviews, PNNL gathered quantitative and qualitative data relating to replication efforts by each organization. These data were analyzed to provide insight into two primary research areas: 1) CBP partners’ replication efforts of technologies and approaches used in the CBP project to the rest of the organization’s building portfolio (including replication verification), and, 2) the market potential for technology diffusion into the total U.S. commercial building stock, as a direct result of the CBP program. The first area of this research focused specifically on replication efforts underway or planned by each CBP program participant. Factors that impact replication include motivation, organizational structure and objectives firms have for implementation of energy efficient technologies. Comparing these factors between different CBP partners revealed patterns in motivation for constructing energy efficient buildings, along with better insight into market trends for green building practices. The second area of this research develops a diffusion of innovations model to analyze potential broad market impacts of the CBP program on the commercial building industry in the United States.

76 FR 15039 - Commercial Space Transportation Grants Program

Science.gov (United States)

2011-03-18

... infrastructure system, which supports the National Space Policy and Congressional intent. Begun in 2010, the... funding for Commercial Space Transportation infrastructure projects. It must be noted that with the FY... deadline, pursuant to 49 United States Code (U.S.C.) Chapter 703 (to be recodified at 51 U.S.C. Chapter 511...

Treatment of DOE mixed wastes using commercial facilities

International Nuclear Information System (INIS)

Kramer, J.F.; Ross, M.A.; Dilday, D.R.

1992-02-01

In a demonstration program, Department of Energy (DOE) solid mixed wastes generated during uranium processing operations are characterized to define the unit operations required for treatment. The objectives included the implementation of these treatment operations utilizing a commercial Treatment, Storage and Disposal Facility (TSDF). In contracting for commercial hazardous and mixed waste treatment, it is important to characterize the waste beyond the identification of toxicity characteristic (TC) and radiological content. Performing treatability studies and verification of all the unit operations required for treatment is critical. The stream selected for this program was TC hazardous for barium (D005) and contaminated with both depleted and low enriched uranium. The program resulted in the generation of characterization data and treatment strategies. The characterization and treatability studies indicated that although a common unit operation was required to remove the toxic characteristic, multiple pretreatment operations were needed. Many of these operations do not exist at available TSDF's, rendering some portions of the stream untreatable using existing commercial TSDF's. For this project the need for pretreatment operations resulted in only a portion of the waste originally targeted for treatment being accepted for treatment at a commercial TSDF. The majority of the targeted stream could not be successfully treated due to lack of an off-site commercial treatment facility having the available equipment and capacity or with the correct combination of RCRA permits and radioactive material handling licenses. This paper presents a case study documenting the results of the project

10 CFR 431.92 - Definitions concerning commercial air conditioners and heat pumps.

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Definitions concerning commercial air conditioners and... PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Air Conditioners and Heat Pumps § 431.92 Definitions concerning commercial air conditioners and heat pumps. The following definitions apply...

Mechanical Properties of Commercial Carbon Fibers Using a Single Filament Tensile Test

International Nuclear Information System (INIS)

Joh, Han-Ik; Song, Hae Kyung; Ku, Bon-Cheol; Lee, Sungho; Kim, Ki-Young; Kang, Phil-Hyun

2013-01-01

In this study, mechanical properties of commercial carbon fibers were evaluated using a single filament tensile test with various fiber gauge lengths. Tensile strength increased significantly with a decreasing length of the test specimens possibly due to small defect sites. The compliance method provided more accurate moduli of the carbon fibers, removing system errors during the single filament tensile test. The Weibull modulus revealed that shorter specimens had an inhomogeneous defect distribution, leading to a higher tensile strength and its standard deviation. X-ray diffractograms of carbon fibers showed a similar crystallinity and orientation in spite of significant differences in the fiber modulus and strength, indicating that crystalline structure of the commercial carbon fibers used in the study was not attributable to the difference in their tensile properties.

SSRscanner: a program for reporting distribution and exact location of simple sequence repeats.

Science.gov (United States)

Anwar, Tamanna; Khan, Asad U

2006-02-20

Simple sequence repeats (SSRs) have become important molecular markers for a broad range of applications, such as genome mapping and characterization, phenotype mapping, marker assisted selection of crop plants and a range of molecular ecology and diversity studies. These repeated DNA sequences are found in both prokaryotes and eukaryotes. They are distributed almost at random throughout the genome, ranging from mononucleotide to trinucleotide repeats. They are also found at longer lengths (> 6 repeating units) of tracts. Most of the computer programs that find SSRs do not report its exact position. A computer program SSRscanner was written to find out distribution, frequency and exact location of each SSR in the genome. SSRscanner is user friendly. It can search repeats of any length and produce outputs with their exact position on chromosome and their frequency of occurrence in the sequence. This program has been written in PERL and is freely available for non-commercial users by request from the authors. Please contact the authors by E-mail: huzzi99@hotmail.com.

TCV software test and validation tools and technique. [Terminal Configured Vehicle program for commercial transport aircraft operation

Science.gov (United States)

Straeter, T. A.; Williams, J. R.

1976-01-01

The paper describes techniques for testing and validating software for the TCV (Terminal Configured Vehicle) program which is intended to solve problems associated with operating a commercial transport aircraft in the terminal area. The TCV research test bed is a Boeing 737 specially configured with digital computer systems to carry out automatic navigation, guidance, flight controls, and electronic displays research. The techniques developed for time and cost reduction include automatic documentation aids, an automatic software configuration, and an all software generation and validation system.

ENERGY STAR Certified Commercial Ice Machines

Data.gov (United States)

U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 2.0 ENERGY STAR Program Requirements for Automatic Commercial Ice Makers that are...

Fundamental length and relativistic length

International Nuclear Information System (INIS)

Strel'tsov, V.N.

1988-01-01

It si noted that the introduction of fundamental length contradicts the conventional representations concerning the contraction of the longitudinal size of fast-moving objects. The use of the concept of relativistic length and the following ''elongation formula'' permits one to solve this problem

ENERGY STAR Certified Commercial Steam Cookers

Data.gov (United States)

U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 1.2 ENERGY STAR Program Requirements for Commercial Steam Cookers that are effective as...

Space Industry Commercialization: A Systems Engineering Evaluation of Alternatives

Science.gov (United States)

Dinally, Jihan

The Constellation Program cancellation reversed the government and commercial space industry's roles and relationships by dedicating the majority of the federal funding and opportunities to the commercial space industry and left the government space industry in search of an approach to collaborate with the dominant organization, the commercial space industry service providers. The space industry government agencies, Air Force Space Command (AFSPC) and National Aeronautics and Space Administration (NASA) had realized that to gain resources in the new commercially oriented economic environment, they had to work together and possess the capabilities aligned with the National Space Policy's documented goals. Multi-organizational collaboration in space industry programs is challenging, as NASA, AFSPC, and commercial providers, follow different [1] enterprise architecture guidance such as the NASA systems engineering Handbook, MIL-STD-499 and "A Guide to the systems engineering Body of Knowledge" by the International Council on systems engineering [2] [3]. A solution to streamline their enterprise architecture documentation and meet National Space Policy goals is the Multi-User Architecture Maturity Model Methodology (MAM3), which offers a tailored systems engineering technique the government agencies and private companies can implement for the program's maturity level. In order to demonstrate the MAM3, a CubeSat motivated study was conducted partnering a commercial provider with a government agency. A survey of the commercial space industry service providers' capabilities was performed to select the private companies for the study. Using the survey results, the commercial space industry service providers were ranked using the Analytic Hierarchy Process (AHP) [4]. The AHP is a structured technique for making complex decisions for representing and quantifying its weights, relating those weights to overall goals, and evaluating alternative solutions [5] - [8]. The weights

A Study on the Revitalizing of technology commercialization in KAERI

International Nuclear Information System (INIS)

Choi, J. I.; Jang, S. K.; Hong, G. P.; Lee, E. S.

2009-02-01

The TEC training program should be implemented for researches who want to commercialize their own technologies. To build creative organization culture is essential for technology commercialization. Collaboration strategy is related to analyze how KAERI is catching up their technological capabilities in nuclear technology, and what the success factors of KAERI in technology commercialization are.

Evaluation of the lateral dynamics of complex articulated commercial vehicles

NARCIS (Netherlands)

Besselink, I.J.M.; Isiklar, G.; Pinxteren, van T.E.L.; Nijmeijer, H.

2008-01-01

By increasing the overall length and weight of commercial vehicles, the transport efficiency and road utilization will be improved and the C02 emissions can be reduced by some 30%. Over the past years experiments are carried out in the Netherlands with special vehicle combinations having an overall

ENERGY STAR Certified Light Commercial HVAC

Data.gov (United States)

U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 3.1 ENERGY STAR Program Requirements for Light Commercial HVAC that are effective as of...

ORNL Superconducting Technology Program for electric power systems. Annual report for FY 1996

Energy Technology Data Exchange (ETDEWEB)

Koncinski, W.S. [ed.; Hawsey, R.A. [comp.

1997-05-01

The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by US industry for commercial development of electric power applications of high temperature superconductivity. The two major elements of this program are wire development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 1996 Annual Program Review held July 31 and August 1, 1996. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high temperature superconductor wire and wire-using systems.

ORNL Superconducting Technology Program for electric power systems. Annual report for FY 1995

International Nuclear Information System (INIS)

Hawsey, R.A.; Turner, J.W.

1996-05-01

The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by U.S. industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and systems development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1995 Annual Program Review held August 1-2, 1995. This ORNL program is highly leveraged by the staff and other resources of U.S. industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with U.S. industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire-using systems

A Technology Plan for Enabling Commercial Space Business

Science.gov (United States)

Lyles, Garry M.

1997-01-01

The National Aeronautics and Space Administration's (NASA) Advanced Space Transportation Program is a customer driven, focused technology program that supports the NASA Strategic Plan and considers future commercial space business projections. The initial cycle of the Advanced Space Transportation Program implementation planning was conducted from December 1995 through February 1996 and represented increased NASA emphasis on broad base technology development with the goal of dramatic reductions in the cost of space transportation. The second planning cycle, conducted in January and February 1997, updated the program implementation plan based on changes in the external environment, increased maturity of advanced concept studies, and current technology assessments. The program has taken a business-like approach to technology development with a balanced portfolio of near, medium, and long-term strategic targets. Strategic targets are influenced by Earth science, space science, and exploration objectives as well as commercial space markets. Commercial space markets include those that would be enhanced by lower cost transportation as well as potential markets resulting in major increases in space business induced by reductions in transportation cost. The program plan addresses earth-to-orbit space launch, earth orbit operations and deep space systems. It also addresses all critical transportation system elements; including structures, thermal protection systems, propulsion, avionics, and operations. As these technologies are matured, integrated technology flight experiments such as the X-33 and X-34 flight demonstrator programs support near-term (one to five years) development or operational decisions. The Advanced Space Transportation Program and the flight demonstrator programs combine business planning, ground-based technology demonstrations and flight demonstrations that will permit industry and NASA to commit to revolutionary new space transportation systems

Length of a Hanging Cable

Directory of Open Access Journals (Sweden)

Eric Costello

2011-01-01

Full Text Available The shape of a cable hanging under its own weight and uniform horizontal tension between two power poles is a catenary. The catenary is a curve which has an equation defined by a hyperbolic cosine function and a scaling factor. The scaling factor for power cables hanging under their own weight is equal to the horizontal tension on the cable divided by the weight of the cable. Both of these values are unknown for this problem. Newton's method was used to approximate the scaling factor and the arc length function to determine the length of the cable. A script was written using the Python programming language in order to quickly perform several iterations of Newton's method to get a good approximation for the scaling factor.

Commercial Baking. Final Report.

Science.gov (United States)

Booth, Nancy

A project filmed three commercial baking videotapes for use by secondary and adult students in food service programs. The three topics were basic dinner rolls, bread making, and hard breads and rolls. Quick-rise dough recipes were developed, written down, and explained for use with the videotapes. A pretest, posttest, and student guide were…

Industry Research and Recommendations for New Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Hendron, B.; Leach, M.; Gregory, N.; Pless, S.; Selkowitz, S.; Matthew, P.

2014-05-01

Researchers evaluated industry needs and developed logic models to support possible future commercial new construction research and deployment efforts that could be led or supported by DOE's Commercial Building Integration program or other national initiatives. The authors believe that these recommendations support a proposed course of action from the current state of commercial building energy efficiency to a possible long-term goal of achieving significant market penetration of cost-effective NZE buildings in all building sectors and climates by 2030.

Fossil fuels. Commercializing clean coal technologies

International Nuclear Information System (INIS)

Fultz, Keith O.; Sprague, John W.; Kirk, Roy J.; Clark, Marcus R. Jr.; Greene, Richard M.; Buncher, Carole S.; Kleigleng, Robert G.; Imbrogno, Frank W.

1989-03-01

Coal, an abundant domestic energy source, provides 25 percent of the nation's energy needs, but its use contributes to various types of pollution, including acid rain. The Department of Energy (DOE) has a Clean Coal Technology (CCT) program whose goal is to expand the use of coal in an environmentally safe manner by contributing to the cost of projects demonstrating the commercial applications of emerging clean coal technologies. Concerned about the implementation of the CCT program, the Chairman, Subcommittee on Energy and Power, House Committee on Energy and Commerce, requested GAO to report on (1) DOE's process of negotiating cooperative agreements with project sponsors, (2) changes DOE has made to the program, (3) the status of funded projects, and (4) the interrelationship between acid rain control proposals and the potential commercialization of clean coal technologies. Under the CCT program, DOE funds up to 50 percent of the cost of financing projects that demonstrate commercial applications of emerging clean coal technologies. DOE has conducted two solicitations for demonstration project proposals and is planning a third solicitation by May 1989. The Congress has appropriated $400 million for the first solicitation, or round one of the program, $575 million for round two, and $575 million for round three, for a total of $1.55 billion. For the round-one solicitation, DOE received 51 proposals from project sponsors. As of December 31, 1988, DOE had funded nine projects and was in the process of negotiating cooperative financial assistance agreements with sponsors of four projects. In September 1988, DOE selected 16 round-two projects from 55 proposals submitted and began the process of negotiating cooperative agreements with the project sponsors. The Congress has debated the need to reduce acid rain-causing emissions associated with fossil fuel combustion. The 100th Congress considered but did not enact about 20 acid rain control bills. On February 9, 1989

National Space Agencies vs. Commercial Space: Towards Improved Space Safety

Science.gov (United States)

Pelton, J.

2013-09-01

Traditional space policies as developed at the national level includes many elements but they are most typically driven by economic and political objectives. Legislatively administered programs apportion limited public funds to achieve "gains" that can involve employment, stimulus to the economy, national defense or other advancements. Yet political advantage is seldom far from the picture.Within the context of traditional space policies, safety issues cannot truly be described as "afterthoughts", but they are usually, at best, a secondary or even tertiary consideration. "Space safety" is often simply assumed to be "in there" somewhere. The current key question is can "safety and risk minimization", within new commercial space programs actually be elevated in importance and effectively be "designed in" at the outset. This has long been the case with commercial aviation and there is at least reasonable hope that this could also be the case for the commercial space industry in coming years. The cooperative role that the insurance industry has now played for centuries in the shipping industry and for decades in aviation can perhaps now play a constructive role in risk minimization in the commercial space domain as well. This paper begins by examining two historical case studies in the context of traditional national space policy development to see how major space policy decisions involving "manned space programs" have given undue primacy to "political considerations" over "safety" and other factors. The specific case histories examined here include first the decision to undertake the Space Shuttle Program (i.e. 1970-1972) and the second is the International Space Station. In both cases the key and overarching decisions were driven by political, schedule and cost considerations, and safety seems absence as a prime consideration. In publicly funded space programs—whether in the United States, Europe, Russia, Japan, China, India or elsewhere—it seems realistic to

Communication disruption of guava moth (Coscinoptycha improbana) using a pheromone analog based on chain length.

Science.gov (United States)

Suckling, D M; Dymock, J J; Park, K C; Wakelin, R H; Jamieson, L E

2013-09-01

The guava moth, Coscinoptycha improbana, an Australian species that infests fruit crops in commercial and home orchards, was first detected in New Zealand in 1997. A four-component pheromone blend was identified but is not yet commercially available. Using single sensillum recordings from male antennae, we established that the same olfactory receptor neurons responded to two guava moth sex pheromone components, (Z)-11-octadecen-8-one and (Z)-12-nonadecen-9-one, and to a chain length analog, (Z)-13-eicosen-10-one, the sex pheromone of the related peach fruit moth, Carposina sasakii. We then field tested whether this non-specificity of the olfactory neurons might enable disruption of sexual communication by the commercially available analog, using male catch to synthetic lures in traps in single-tree, nine-tree and 2-ha plots. A disruptive pheromone analog, based on chain length, is reported for the first time. Trap catches for guava moth were disrupted by three polyethylene tubing dispensers releasing the analog in single-tree plots (86% disruption of control catches) and in a plots of nine trees (99% disruption). Where peach fruit moth pheromone dispensers were deployed at a density of 1000/ha in two 2-ha areas, pheromone traps for guava moth were completely disrupted for an extended period (up to 470 days in peri-urban gardens in Mangonui and 422 days in macadamia nut orchards in Kerikeri). In contrast, traps in untreated areas over 100 m away caught 302.8 ± 128.1 moths/trap in Mangonui and 327.5 ± 78.5 moths/ trap in Kerikeri. The longer chain length in the pheromone analog has greater longevity than the natural pheromone due to its lower volatility. Chain length analogs may warrant further investigation for mating disruption in Lepidoptera, and screening using single-sensillum recording is recommended.

Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume IV. Commercial potential

International Nuclear Information System (INIS)

1979-12-01

Volume IV provides time and cost estimates for positioning new nuclear power systems for commercial deployment. The assessment also estimates the rates at which the new systems might penetrate the domestic market, assuming the continuing viability of the massive light-water reactor network that now exists worldwide. This assessment does not recommend specific, detailed program plans and budgets for individual systems; however, it is clear from this analysis that any of the systems investigated could be deployed if dictated by national interest

Vaccination uptake and awareness of a free hepatitis B vaccination program among female commercial sex workers.

Science.gov (United States)

Baars, Jessica E; Boon, Brigitte J F; Garretsen, Henk F; van de Mheen, Dike

2009-01-01

We sought to explore the reach of a free hepatitis B vaccination program among female commercial sex workers (CSWs) within a legalized prostitution setting in the Netherlands. We also investigated the reasons for nonparticipation and noncompliance. In this cross-sectional study based on ethnographic mapping and targeted sampling, 259 CSWs were interviewed at their work in 3 regions in the Netherlands. The semistructured interviews contained questions on sociodemographics, sexual risk behavior, sex work, awareness of the opportunity to obtain free hepatitis B vaccination, vaccination uptake, and compliance with the full vaccination schedule. Of our sample, 79% reported awareness of the opportunity to obtain hepatitis B vaccination, and 63% reported to be vaccinated against hepatitis B (received > or =1 vaccination). A personal approach by health professionals or was associated with vaccination uptake, when specific sociodemographic variables, sexual behavior, and sex work related covariates were controlled for in the analysis. Window prostitution and the duration of working in the region were associated with awareness of the opportunity to obtain free hepatitis B vaccination. The results of this study suggest that outreach activities (i.e., a personal approach) within this program are beneficial. Transient CSWs are more difficult to reach within the current vaccination program. These results can be used to increase the success of future health programs among this risk group.

31 CFR 103.188 - Special measures against Commercial Bank of Syria.

Science.gov (United States)

2010-07-01

... Programs Law Enforcement Access to Foreign Bank Records § 103.188 Special measures against Commercial Bank of Syria. (a) Definitions. For purposes of this section: (1) Commercial Bank of Syria means any branch, office, or subsidiary of Commercial Bank of Syria operating in Syria or in any other jurisdiction...

Commercialization of NESSUS: Status

Science.gov (United States)

Thacker, Ben H.; Millwater, Harry R.

1991-01-01

A plan was initiated in 1988 to commercialize the Numerical Evaluation of Stochastic Structures Under Stress (NESSUS) probabilistic structural analysis software. The goal of the on-going commercialization effort is to begin the transfer of Probabilistic Structural Analysis Method (PSAM) developed technology into industry and to develop additional funding resources in the general area of structural reliability. The commercialization effort is summarized. The SwRI NESSUS Software System is a general purpose probabilistic finite element computer program using state of the art methods for predicting stochastic structural response due to random loads, material properties, part geometry, and boundary conditions. NESSUS can be used to assess structural reliability, to compute probability of failure, to rank the input random variables by importance, and to provide a more cost effective design than traditional methods. The goal is to develop a general probabilistic structural analysis methodology to assist in the certification of critical components in the next generation Space Shuttle Main Engine.

Electric vehicles: Technology assessment and commercialization

International Nuclear Information System (INIS)

Zabot, S.

1991-01-01

This article traces the history of commercialization efforts relative to electric vehicles, assesses the state-of-the-art of electric vehicle technology and identifies the industrial firms that are investing heavily in this field. The main design problems affecting the commercialization of these vehicles (e.g., battery weight, autonomy, operating safety and toxicity) are pointed out. Comparisons of commercialization prospects are made with those for hydrogen fuelled vehicles. With regard to investments in research programs, it is argued that, in addition to car manufacturers and oil companies, the usual active participants in the transport sector, new participants are needed to give added support to the development of electric vehicles, namely, electric utilities and battery manufacturers

Steam generator tubing development for commercial fast breeder reactors

International Nuclear Information System (INIS)

Sessions, C.E.; Uber, C.F.

1981-01-01

The development work to design, manufacture, and evaluate pre-stressed double-wall 2/one quarter/ Cr-1 Mo steel tubing for commercial fast breeder reactor steam generator application is discussed. The Westinghouse plan for qualifying tubing vendors to produce this tubing is described. The results achieved to date show that a long length pre-stressed double-wall tube is both feasible and commercially available. The evaluation included structural analysis and experimental measurement of the pre-stress within tubes, as well as dimensional, metallurgical, and interface wear tests of tube samples produced. This work is summarized and found to meet the steam generator design requirements. 10 refs

Commercializing ALURTRONs electron beam irradiation services

International Nuclear Information System (INIS)

Siti Aiasah Hashim; Mohd Sidek Othman; Shari Jahar; Sarada Idris; Naurah Mohd Isa; Muhamad Zahidee Taat

2010-01-01

ALURTRON has been the nation's sole electron irradiation service provider for research sectors. The main irradiation is done by utilising the EPS 3000 Cockcroft-Walton type 3.0 MeV, 90 k Watts electron beam machine (EBM). With more than 15 years experience in the operation and maintenance of the EPS, the challenge is now to commercialize the service at a larger and profitable scale. Medical products sterilization at commercial level has been ruled out since the energy is insufficient to penetrate dense and non-homogenous items. Recently, the demand for irradiation of wire and heat shrinkable tubes is showing bigger commercial potential. Therefore, prudent planning considerations need to be taken to ensure profitable return to the agency. Calculations were made to estimate ALURTRON service capacity, based on the existing EBM and its auxiliary systems. Details of the calculation including all the variables are presented. Results indicated that Alurtron should be able to process a minimum of 1000 km of small wires per month, running at 150 m/ min, working in two shifts, 5 days a week. The projected revenue is dependent on the charges imposed on the basis of total length delivered. (author)

Free material stiffness design of laminated composite structures using commercial finite element analysis codes

DEFF Research Database (Denmark)

Henrichsen, Søren Randrup; Lindgaard, Esben; Lund, Erik

2015-01-01

In this work optimum stiffness design of laminated composite structures is performed using the commercially available programs ANSYS and MATLAB. Within these programs a Free Material Optimization algorithm is implemented based on an optimality condition and a heuristic update scheme. The heuristic...... update scheme is needed because commercially available finite element analysis software is used. When using a commercial finite element analysis code it is not straight forward to implement a computationally efficient gradient based optimization algorithm. Examples considered in this work are a clamped......, where full access to the finite element analysis core is granted. This comparison displays the possibility of using commercially available programs for stiffness design of laminated composite structures....

Comparison of the applicability of commercial computer programs to study the thermodynamic stability of metal oxides; Vertailu kaupallisten laskentaohjelmien soveltuvuudesta metallioksidien termodynaamiseen stabiilisuustarkasteluun

Energy Technology Data Exchange (ETDEWEB)

Koukkari, P.; Olin, M. [VTT Chemical Technology, Espoo (Finland); Laitinen, T. [VTT Manufacturing Technology, Espoo (Finland); Sippola, H. [GEM Systems Oy (Finland)

1999-04-01

The oxide films formed on primary circuit surfaces incorporate radioactive species from the coolant and influence different corrosion phenomena in nuclear power plants. One approach to improve the understanding on the formation and properties of these oxide films is to evaluate their thermodynamic stability. The aim of this work was to compare and demonstrate the applicability of different commercial thermodynamic computer programs to model the deposition of oxides containing iron, chromium and/or nickel in various nuclear power plant environments. The programs considered in this evaluation comprised the EQ3/6 program and a product group including such products as ChemSage, HSC (including SOLGASMIX and GIBBS), H+PLUS and ChemSheet. In the group the transfer of data between different products is relatively easy. The goal was to find out which programs can be applied to evaluate the stability of oxide films, but not to assess the absolute accuracy of the calculations. The evaluation was done by means of applying the programs to calculate the stability of pure and mixed oxides of iron, nickel and chromium on stainless steel both in WWER and BWR conditions at different temperatures and coolant compositions. The comparison showed that EQ3/6 is suitable for most thermodynamic calculations. EQ3/6 can be characterised as a professional tool, for which no commercial training is available. ChemSage is a versatile and reliable program, which can be well used together with HSC and H+PLUS. ChemSage is mainly a professional tool, while HSC is easier to operate by an occasional user. Commercial training and support is available for both ChemSage and HSC. ChemSheet has been designed to utilise the properties of ChemSage in a user-friendly spreadsheet environment. All the products tested calculate thermodynamic equilibrium. Thus they are suitable to characterise such conditions in which the formation of a certain phase is or becomes possible. On the other hand, the modelling of the

Unsafe and violent behavior in commercials aired during televised major sporting events.

Science.gov (United States)

Tamburro, Robert F; Gordon, Patricia L; D'Apolito, James P; Howard, Scott C

2004-12-01

Injuries are the leading cause of death in children, and media exposure seems to increase children's risk-taking behavior. Televised sports are commonly viewed by children. The objective of this study was to determine the proportion of commercials that depict violence or other unsafe behavior during major televised sporting events that are aired before 9:00 pm. We obtained a list of the 50 sports programs that were most highly rated by Nielsen Media Research and that were televised between September 1, 2001, and September 1, 2002. These 50 programs included Winter Olympics events (n = 15), National Football League (NFL) regular season games (n = 14), NFL playoff games (n = 10), Major League Baseball World Series and playoff games (n = 7), the NFL Super Bowl (n = 1), the National Basketball Association Western Conference Final Game (n = 1), the College Football Rose Bowl (n = 1), and the National Collegiate Athletic Association Basketball Championship game (n = 1). Two other events were reviewed as well: the final round of the Masters Golf Championship, because it was the only sporting event rated in the top 50 of the previous year that was not represented by a similar sporting event in the study year, and the Daytona 500 National Association for Stock Car Auto Racing race, because it was the only event rated among the top 75 of the study year that was not represented by a similar event (ie, there were no other golfing or auto racing events reviewed). These events were included because different sporting events may attract different viewers and different advertisements; thus, their inclusion provides a more comprehensive evaluation of the topic. For sporting events with >3 programs in the top 50 (NFL regular season games, NFL playoff games, Winter Olympic events, and Major League Baseball World Series), representative samples of events were assessed. Surrogate events were analyzed for programs that were aired after 9:00 PM (Eastern Time) to control for the reduced

Relationships between total length and otolith size of bluefish Pomatomus saltatrix (Linnaeus, 1766 in the Marmara Sea of Turkey

Directory of Open Access Journals (Sweden)

Habib Bal

2018-01-01

Full Text Available In the present study, bluefish, Pomatomus saltatrix, was monthly collected from commercial fishing boats operating in the Marmara Sea between January and December 2014. The relationship between total length and otolith size of 346 bluefish samples were examined. Total lengths of females, males and unidentified samples were ranged from between 13.2-37.0, 12.3-34.8 and 13.0-31.6 cm, respectively. Otolith lengths were between 3.82-12.60 mm and otolith width were between 1.59-4.34 mm for all samples. It was found that there is a strong correlations between otolith length-total length (r2 =0.88 and otolith width-total length (r2 0.81.

Plan for the development and commercialization of inertial confinement fusion

International Nuclear Information System (INIS)

Willke, T.; Dingee, D.; Ault, L.; Bampton, M.; Bickford, W.; Hartman, J.; Rockwood, A.; Simonen, E.; Teofilo, V.; Frank, T.

1978-01-01

An engineering development program strategy to take inertial confinement fusion (ICF) from the milestone of scientific feasibility to a point where its commercial viability can be determined is described. The ICF program objectives and basic program strategy are discussed

Engineering-scale vitrification of commercial high-level waste

International Nuclear Information System (INIS)

Bonner, W.F.; Bjorklund, W.J.; Hanson, M.S.; Knowlton, D.E.

1980-04-01

To date, technology for immobilizing commercial high-level waste (HLW) has been extensively developed, and two major demonstration projects have been completed, the Waste Solidification Engineering Prototypes (WSEP) Program and the Nuclear Waste Vitrification Project (NWVP). The feasibility of radioactive waste solidification was demonstrated in the WSEP program between 1966 and 1970 (McElroy et al. 1972) using simulated power-reactor waste composed of nonradioactive chemicals and HLW from spent, Hanford reactor fuel. Thirty-three engineering-scale canisters of solidified HLW were produced during the operations. In early 79, the NWVP demonstrated the vitrification of HLW from the processing of actual commercial nuclear fuel. This program consisted of two parts, (1) waste preparation and (2) vitrification by spray calcination and in-can melting. This report presents results from the NWVP

The United States program for the safety assessment of geologic disposal of commercial radioactive wastes

International Nuclear Information System (INIS)

Claiborne, H.C.

1977-01-01

The safe disposal of commercial radioactive wastes in deep geologic formations is the goal of the National Waste Terminal Storage (NWTS) Program. Safety assessment begins with selection of a disposal site; that is, all geologic and hydrologic factors must indicate long-term stability of the formation and prospective isolation of wastes from circulating ground waters for hundreds of thousands of years. The long-term stability of each site under thermal loading must then be demonstrated by sophisticated rock mechanic analyses. Therefore, it can be expected that the sites that are chosen will effectively isolate the waste for a very long period of time. However, to help provide answers on the mechanisms and consequences of an unlikely breach in the integrity of the repository, a Waste Isolation Safety Assessment Program (WISAP) is studied. The overall objective of this program is an assessment of the safety associated with the long-term disposal of high-level radioactive waste in a geologic formation. This objective will be achieved by developing methods and generating data necessary to characterize the safety of generic geological waste disposal concepts, which are to be applied in the assessment of specific sites. It is expected that no one particular model will suffice. Both deterministic and probabilistic approaches will be used, and the entire spectrum of phenomena that could influence geologic isolation will be considered

Relationships between length and coverage of decision rules

KAUST Repository

Amin, Talha M.; Chikalov, Igor; Moshkov, Mikhail; Zielosko, Beata

2014-01-01

The paper describes a new tool for study relationships between length and coverage of exact decision rules. This tool is based on dynamic programming approach. We also present results of experiments with decision tables from UCI Machine Learning Repository.

Relationships between length and coverage of decision rules

KAUST Repository

Amin, Talha

2014-02-14

The paper describes a new tool for study relationships between length and coverage of exact decision rules. This tool is based on dynamic programming approach. We also present results of experiments with decision tables from UCI Machine Learning Repository.

The market effects of SDG and E's and PG and E's commercial lighting efficiency programs

Energy Technology Data Exchange (ETDEWEB)

Rosenberg, M.; Rufo, M.; Besa, A.; O' Drain, M.

1998-07-01

The paper summarizes the methods and findings of a project to assess the market effects of commercial lighting efficiency programs sponsored by San Diego Gas & Electric and Pacific Gas and Electric. The study focused on effects on the markets for efficient fluorescent lighting components: electronic ballasts, T-8 lamps, and fixtures that integrate those technologies. The research for the project consisted of surveys of representative samples of end-users in the sponsors' service territories and a non-program area in which no utility DSM program had operated, in-depth interviews with manufacturers and other supply side actors in both the sponsor and non-program areas, and review of secondary sources. The study found that the sponsors' programs, as part of a larger national utility effort, had a significant effect on levels of customer demand for efficient ballasts and lamps at the national as well as regional level. The sponsors programs also had important effects on the local markets, such as increased promotion by designers and contractors and very rapid up swings in demand among certain sectors of end-users. Market share for efficient fluorescent components continues to increase in the face of decreased utility program support. This and other evidence suggests that some of the market effects of the sponsors' programs will be durable.

Commercial Kidney Transplantation: Attitude, Knowledge, Perception, and Experience of Recipients.

Science.gov (United States)

Al Rahbi, Fatma; Al Salmi, Issa

2017-07-01

Kidney transplantation is the gold standard for patients with end-stage kidney disease. In view of shortages of available organs, long wait times for possible transplantation, and strict regulation, many patients opt for commercial transplantation. This study elicits the reasons and motivations for patients with end-stage kidney disease to elect for commercial transplant. A questionnaire-based evaluation was conducted during the period from July 2015 until late December 2015. It consisted of 29 multiple choice questions and was distributed to all patients who underwent commercial kidney transplantation. One hundred and fifty patients were approached to participate and 106 agreed. Of the participants, 60% were male with an average age of 41.5 (SD 14.8) years and ranged from 18 to 83 years. The majority (82%) of our participants were educated ranging from primary to college level. The major reason (71%) for these participants to obtain commercial transplants was stated as the unavailability of a live related donor. Thirteen percent stated that they objected to getting a kidney donated from a family member, and 9% stated that they were worried about taking a kidney from a family member. Finally, 3% of participants stated that they needed prompt transplant and could not wait for a long time for transplant investigations and the workup associated with this program. The study showed that the most common underlying cause for seeking commercial transplantation is the unavailability of a national transplant program, particularly transplantation from deceased sources. All western ethical arguments turn out to become of vital importance in developing countries, because transplantation is the cheapest renal replacement therapy. However, it must be emphasized that commercial transplants should not be an alternative to building a national transplant initiative. The national diseased program must be a priority with full financial and administrative support. All government

Regional Operations Research Program for Commercialization of Geothermal Energy in the Rocky Mountain Basin and Range. Final Technical Report, January 1980--March 1981

Energy Technology Data Exchange (ETDEWEB)

None

1981-07-01

This report describes the work accomplished from January 1980 to March 1981 in the Regional Operations Research efforts for the Rocky Mountain Basin and Range Geothermal Commercialization Program. The scope of work is as described in New Mexico State University Proposal 80-20-207. The work included continued data acquisition and extension of the data base, enhancement and refinement of the economic models for electric and direct use applications, site-specific and aggregated analyses in support of the state teams, special analyses in support of several federal agencies, and marketing assistance to the state commercialization teams.

40 CFR 171.3 - Categorization of commercial applicators of pesticides.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Categorization of commercial applicators of pesticides. 171.3 Section 171.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS CERTIFICATION OF PESTICIDE APPLICATORS § 171.3 Categorization of commercial...

ENERGY STAR Certified Commercial Refrigerators and Freezers

Data.gov (United States)

U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 4.0 ENERGY STAR Program Requirements for Commercial Refrigerators and Freezers that are...

Accuracy of Genomic Prediction in a Commercial Perennial Ryegrass Breeding Program

Directory of Open Access Journals (Sweden)

Dario Fè

2016-11-01

Full Text Available The implementation of genomic selection (GS in plant breeding, so far, has been mainly evaluated in crops farmed as homogeneous varieties, and the results have been generally positive. Fewer results are available for species, such as forage grasses, that are grown as heterogenous families (developed from multiparent crosses in which the control of the genetic variation is far more complex. Here we test the potential for implementing GS in the breeding of perennial ryegrass ( L. using empirical data from a commercial forage breeding program. Biparental F and multiparental synthetic (SYN families of diploid perennial ryegrass were genotyped using genotyping-by-sequencing, and phenotypes for five different traits were analyzed. Genotypes were expressed as family allele frequencies, and phenotypes were recorded as family means. Different models for genomic prediction were compared by using practically relevant cross-validation strategies. All traits showed a highly significant level of genetic variance, which could be traced using the genotyping assay. While there was significant genotype × environment (G × E interaction for some traits, accuracies were high among F families and between biparental F and multiparental SYN families. We have demonstrated that the implementation of GS in grass breeding is now possible and presents an opportunity to make significant gains for various traits.

The role of reactant unmixedness, strain rate, and length scale on premixed combustor performance

Energy Technology Data Exchange (ETDEWEB)

Samuelsen, S.; LaRue, J.; Vilayanur, S. [Univ. of California, Irvine, CA (United States)] [and others

1995-10-01

Lean premixed combustion provides a means to reduce pollutant formation and increase combustion efficiency. However, fuel-air mixing is rarely uniform in space and time. This nonuniformity in concentration will lead to relative increases in pollutant formation and decreases in combustion efficiency. The nonuniformity of the concentration at the exit of the premixer has been defined by Lyons (1981) as the {open_quotes}unmixedness.{close_quotes} Although turbulence properties such as length scales and strain rate are known to effect unmixedness, the exact relationship is unknown. Evaluating this relationship and the effect of unmixedness in premixed combustion on pollutant formation and combustion efficiency are an important part of the overall goal of US Department of Energy`s Advanced Turbine Systems (ATS) program and are among the goals of the program described herein. The information obtained from ATS is intended to help to develop and commercialize gas turbines which have (1) a wide range of operation/stability, (2) a minimal amount of pollutant formation, and (3) high combustion efficiency. Specifically, with regard to pollutants, the goals are to reduce the NO{sub x} emissions by at least 10%, obtain less than 20 PPM of both CO and UHC, and increase the combustion efficiency by 5%.

Survey VS audit by using method 2 to dedicate commercial grade services

International Nuclear Information System (INIS)

Martinez ayucar, F. J.

2014-01-01

Since the start of the commercial grade dedications, both 10CFR21 and EPRI documents, plus the dedication of commercial grade components, and the stage of commercial grade dedication of the services contemplated. And recently the NRC through various communications and answers trafficking among other issues the commercial grade dedication service. The NRC has detected repeatedly incorrect application of the survey as a method of commercial grade dedication and instead has done an audit of the program elements of commercial quality. (Author)

Reasonable designing method for fillet welding leg length

Energy Technology Data Exchange (ETDEWEB)

Kiso, T; Michiyuki, T; Nagao, S; Yoshikawa, M; Miyazaki, S

1976-12-01

In VLCC and ULCC vessels, the scantling of structural members, especially the thickness of web plate, increases naturally. The present rule of each classification society generally prescribes that welding leg length should be based on the thickness of the web plate. Welding leg length between this web plate and skin plate such as shell plate, deck plate, etc., or face plate, increases according to increase of the thickness of the web plate. We investigated the method to decide reasonable welding leg length and its programming by using the results of finite element method structural analysis, without adhering to the above rule about welding leg length. As a result of applying this method to actual ships under classification societies' approval, the amount of welding decreased by from about 10 percent to 15 percent compared with that required by the above rule. The rationality of the method has been already confirmed by successful results of the application to several vessels in service.

California Commercial End-Use Survey - CEUS

Science.gov (United States)

Efficiency in Existing Buildings Energy Efficiency Program Contacts Financing Opportunities Home Energy Rebates and Incentives Energy Efficiency Financing Energy Innovations Small Grant (EISG) EPIC Funding commercial building type categories. Download the CEUS Project Final Report. Publication # CEC-400-2006-005

Espanol comercial para estudiantes posgraduados (Commercial Spanish for Postgraduate Students).

Science.gov (United States)

Valdivieso, Jorge H.

1987-01-01

Describes a commercial Spanish language program for postgraduate students of business administration that attempts to fulfill the immediate professional needs of all students. The content of intermediate and advanced courses is discussed, and a list of textbooks for Spanish commercial correspondence is included. (TR)

Advanced LWR technology for commercial application

International Nuclear Information System (INIS)

Redding, J.R.

1993-01-01

Advanced Light Water Reactors (ALWRs) are now being deployed and commercialized around the world. In Japan, the Tokyo Electric Power Company (TEPCO) is building the world's first ALWRs, two 1300 MWe Advanced BWRs (ABWRs). In the United States, the Department of Energy, utilities and suppliers are undertaking a cooperative program called First of a Kind Engineering (FOAKE). The purpose of FOAKE is to perform the detailed engineering of ALWRs to that they will be commercially available to U.S. utilities in the mid-1990s. The U.S. industry is in the second year of its strategic plan to have an ALWR in commercial operation by the year 2000. Elsewhere, the Taiwan Power Company has issued a Request for Proposal for two ALWRs so be built at its Lungmen site, with commercial operation of the first unit to be in the year 2000. Korea is formulating plans for an ALWR and other countries, such as Indonesia and Mexico, are looking into the feasibility of building ALWRs

Efficacy of a randomized trial examining commercial weight loss programs and exercise on metabolic syndrome in overweight and obese women.

Science.gov (United States)

Baetge, Claire; Earnest, Conrad P; Lockard, Brittanie; Coletta, Adriana M; Galvan, Elfego; Rasmussen, Christopher; Levers, Kyle; Simbo, Sunday Y; Jung, Y Peter; Koozehchian, Majid; Oliver, Jonathan; Dalton, Ryan; Sanchez, Brittany; Byrd, Michael J; Khanna, Deepesh; Jagim, Andrew; Kresta, Julie; Greenwood, Mike; Kreider, Richard B

2017-02-01

While commercial dietary weight-loss programs typically advise exercise, few provide actual programing. The goal of this study was to compare the Curves Complete 90-day Challenge (CC, n = 29), which incorporates exercising and diet, to programs advocating exercise (Weight Watchers Points Plus (WW, n = 29), Jenny Craig At Home (JC, n = 27), and Nutrisystem Advance Select (NS, n = 28)) or control (n = 20) on metabolic syndrome (MetS) and weight loss. We randomized 133 sedentary, overweight women (age, 47 ± 11 years; body mass, 86 ± 14 kg; body mass index, 35 ± 6 kg/m 2 ) into respective treatment groups for 12 weeks. Data were analyzed using chi square and general linear models adjusted for age and respective baseline measures. Data are means ± SD or mean change ± 95% confidence intervals (CIs). We observed a significant trend for a reduction in energy intake for all treatment groups and significant weight loss for all groups except control: CC (-4.32 kg; 95% CI, -5.75, -2.88), WW (-4.31 kg; 95% CI, -5.82, -2.96), JC (-5.34 kg; 95% CI, -6.86, -3.90), NS (-5.03 kg; 95% CI, -6.49, -3.56), and control (0.16 kg, 95% CI, -1.56, 1.89). Reduced MetS prevalence was observed at follow-up for CC (35% vs. 14%, adjusted standardized residuals (adjres.) = 3.1), but not WW (31% vs. 28% adjres. = 0.5), JC (37% vs. 42%, adjres. = -0.7), NS (39% vs. 50% adjres. = -1.5), or control (45% vs. 55% adjres. = -1.7). While all groups improved relative fitness (mL·kg -1 ·min -1 ) because of weight loss, only the CC group improved absolute fitness (L/min). In conclusion, commercial programs offering concurrent diet and exercise programming appear to offer greater improvements in MetS prevalence and cardiovascular function after 12 weeks of intervention.

Sodium monitoring in commercially processed and restaurant foods.

Science.gov (United States)

Ahuja, Jaspreet K C; Pehrsson, Pamela R; Haytowitz, David B; Wasswa-Kintu, Shirley; Nickle, Melissa; Showell, Bethany; Thomas, Robin; Roseland, Janet; Williams, Juhi; Khan, Mona; Nguyen, Quynhanh; Hoy, Kathy; Martin, Carrie; Rhodes, Donna; Moshfegh, Alanna; Gillespie, Cathleen; Gunn, Janelle; Merritt, Robert; Cogswell, Mary

2015-03-01

Most sodium in the US diet comes from commercially processed and restaurant foods. Sodium reduction in these foods is key to several recent public health efforts. The objective was to provide an overview of a program led by the USDA, in partnership with other government agencies, to monitor sodium contents in commercially processed and restaurant foods in the United States. We also present comparisons of nutrients generated under the program to older data. We track ∼125 commercially processed and restaurant food items ("sentinel foods") annually using information from food manufacturers and periodically by nationwide sampling and laboratory analyses. In addition, we monitor >1100 other commercially processed and restaurant food items, termed "priority-2 foods" (P2Fs) biennially by using information from food manufacturers. These foods serve as indicators for assessing changes in the sodium content of commercially processed and restaurant foods in the United States. We sampled all sentinel foods nationwide and reviewed all P2Fs in 2010-2013 to determine baseline sodium concentrations. We updated sodium values for 73 sentinel foods and 551 P2Fs in the USDA's National Nutrient Database for Standard Reference (releases 23-26). Sodium values changed by at least 10% for 43 of the sentinel foods, which, for 31 foods, including commonly consumed foods such as bread, tomato catsup, and potato chips, the newer sodium values were lower. Changes in the concentrations of related nutrients (total and saturated fat, total sugar, potassium, or dietary fiber) that were recommended by the 2010 Dietary Guidelines for Americans for reduced or increased consumption accompanied sodium reduction. The results of sodium reduction efforts, based on resampling of the sentinel foods or re-review of P2Fs, will become available beginning in 2015. This monitoring program tracks sodium reduction efforts, improves food composition databases, and strengthens national nutrition monitoring. © 2015

Consideration of adding a commercial module to the International Space Station

Science.gov (United States)

Friefeld, J.; Fugleberg, D.; Patel, J.; Subbaraman, G.

1999-01-01

The National Aeronautics and Space Administration (NASA) is currently assembling the International Space Station in Low Earth Orbit. One of NASA's program objectives is to encourage space commercialization. Through NASA's Engineering Research and Technology Development program, Boeing is conducting a study to ascertain the feasibility of adding a commercial module to the International Space Station. This module (facility) that can be added, following on-orbit assembly is described. The facility would have the capability to test large, engineering scale payloads in a space environment. It would also have the capability to provide services to co-orbiting space vehicles as well as gathering data for commercial terrestrial applications. The types of industries to be serviced are described as are some of the technical and business considerations that need to be addressed in order to achieve commercial viability.

Addressing vaccine hesitancy: The potential value of commercial and social marketing principles and practices.

Science.gov (United States)

Nowak, Glen J; Gellin, Bruce G; MacDonald, Noni E; Butler, Robb

2015-08-14

Many countries and communities are dealing with groups and growing numbers of individuals who are delaying or refusing recommended vaccinations for themselves or their children. This has created a need for immunization programs to find approaches and strategies to address vaccine hesitancy. An important source of useful approaches and strategies is found in the frameworks, practices, and principles used by commercial and social marketers, many of which have been used by immunization programs. This review examines how social and commercial marketing principles and practices can be used to help address vaccine hesitancy. It provides an introduction to key marketing and social marketing concepts, identifies some of the major challenges to applying commercial and social marketing approaches to immunization programs, illustrates how immunization advocates and programs can use marketing and social marketing approaches to address vaccine hesitancy, and identifies some of the lessons that commercial and non-immunization sectors have learned that may have relevance for immunization. While the use of commercial and social marketing practices and principles does not guarantee success, the evidence, lessons learned, and applications to date indicate that they have considerable value in fostering vaccine acceptance. Copyright © 2015. Published by Elsevier Ltd.

National plan for the accelerated commercialization of solar energy. Final report

Energy Technology Data Exchange (ETDEWEB)

None

1979-09-01

After a brief profile of the Mid-American region and characterization of the residential and commercial markets and the industry of the region, a short description is given of a regional planning meeting held for the purpose of preparing input for the Mid-American section of the National Program for the Accelerated Commercialization of Solar Energy (NPAC) Implementation plans. For each of thirty-eight programs, the objective, rationale, task statement/description, evaluation measures, and implementor are given. The programs are in these areas: public education/awareness; education/training; legislative/regulatory; performance/analysis; design/planning;demonstrations; state interface; technology; information dissemination; legal and regulatory; analysis and assessment; and regional coordination. Two policy statements are included - one on cratering a solar society and the other recommending the expansion of the commercialization to encompass and include the concepts of utilization and popularization in the plan for the advancement of solar energy. (LEW)

US development and commercialization of a North American mobile satellite service

Science.gov (United States)

Arnold, Ray J.; Gray, Valerie; Freibaum, Jerry

1990-01-01

U.S. policies promoting applications and commercialization of space technology for the 'benefit of mankind,' and emphasis on international competitiveness, formed the basis of NASA's Mobile Satellite (MSAT) R&D and user experiments program to develop a commercial U.S. Mobile Satellite Service. Exemplifying this philosophy, the MSAT program targets the reduction of technical, regulatory, market, and financial risks that inhibit commercialization. The program strategy includes industry and user involvement in developing and demonstrating advanced technologies, regulatory advocacy, and financial incentives to industry. Approximately two decades of NASA's satellite communications development and demonstrations have contributed to the emergence of a new multi-billion dollar industry for land, aeronautical, and maritime mobile communications via satellite. NASA's R&D efforts are now evolving from the development of 'enabling' ground technologies for VHF, UHF, and L-Band mobile terminals, to Ka-Band terminals offering additional mobility and user convenience.

US development and commercialization of a North American mobile satellite service

Science.gov (United States)

Arnold, Ray J.; Gray, Valerie; Freibaum, Jerry

U.S. policies promoting applications and commercialization of space technology for the 'benefit of mankind,' and emphasis on international competitiveness, formed the basis of NASA's Mobile Satellite (MSAT) R&D and user experiments program to develop a commercial U.S. Mobile Satellite Service. Exemplifying this philosophy, the MSAT program targets the reduction of technical, regulatory, market, and financial risks that inhibit commercialization. The program strategy includes industry and user involvement in developing and demonstrating advanced technologies, regulatory advocacy, and financial incentives to industry. Approximately two decades of NASA's satellite communications development and demonstrations have contributed to the emergence of a new multi-billion dollar industry for land, aeronautical, and maritime mobile communications via satellite. NASA's R&D efforts are now evolving from the development of 'enabling' ground technologies for VHF, UHF, and L-Band mobile terminals, to Ka-Band terminals offering additional mobility and user convenience.

Management of commercial high-level and transuranium-contaminated radioactive wastes. Environmental statement

International Nuclear Information System (INIS)

1974-09-01

This Draft Environmental Statement is issued to assess the environmental impact of the AEC's program to manage commercial high-level and transuranium-contaminated radioactive wastes. These are the types of commercial radioactive wastes for which AEC custody is required by present or anticipated regulations. The program consists of three basic parts: development of a Retrievable Surface Storage Facility (RSSF) for commercial high-level waste, using existing technology; evaluating geological formations and sites for the development of a Geological Disposal Pilot Plant (GDPP) which would lead to permanent disposal; and providing retrievable storage for the transuranium-contaminated waste pending availability of permanent disposal. Consideration has been given to all environmental aspects of the program, using waste generation projections through the year 2000. Radiological and other impacts of implementing the program are expected to be minimal, but will be discussed in further environmental statements which will support budget actions for specific repositories. The alternatives discussed in this Draft Environmental Statement are presented. (U.S.)

Clean Coal Technology Demonstration Program. Program update 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

The Clean Coal Technology Demonstration Program (CCT Program) is a $7.14 billion cost-shared industry/government technology development effort. The program is to demonstrate a new generation of advanced coal-based technologies, with the most promising technologies being moved into the domestic and international marketplace. Clean coal technologies being demonstrated under the CCT program are creating the technology base that allows the nation to meet its energy and environmental goals efficiently and reliably. The fact that most of the demonstrations are being conducted at commercial scale, in actual user environments, and under conditions typical of commercial operations allows the potential of the technologies to be evaluated in their intended commercial applications. The technologies are categorized into four market sectors: advanced electric power generation systems; environmental control devices; coal processing equipment for clean fuels; and industrial technologies. Sections of this report describe the following: Role of the Program; Program implementation; Funding and costs; The road to commercial realization; Results from completed projects; Results and accomplishments from ongoing projects; and Project fact sheets. Projects include fluidized-bed combustion, integrated gasification combined-cycle power plants, advanced combustion and heat engines, nitrogen oxide control technologies, sulfur dioxide control technologies, combined SO{sub 2} and NO{sub x} technologies, coal preparation techniques, mild gasification, and indirect liquefaction. Industrial applications include injection systems for blast furnaces, coke oven gas cleaning systems, power generation from coal/ore reduction, a cyclone combustor with S, N, and ash control, cement kiln flue gas scrubber, and pulse combustion for steam coal gasification.

Length-weight relationship of eleven species of marine catfishes from the northern Arabian Sea coast of Pakistan

Science.gov (United States)

Farooq, Noureen; Qamar, Nazia; Rashid, Shahnaz; Panhwar, Sher Khan

2017-09-01

This study records length-weight relationships (LWRs) for eleven commercially important marine catfish species of the family Ariidae (sea catfishes) and Plotosidae (eel catfishes) from the northern Arabian Sea coast of Pakistan. The specimens were sampled from December 2014 to November 2015, using bottom trawls with various mesh sizes by commercial vessels. The species were Nemapteryx caelatus, Sciades sona, Arius gagora, Batrachocephalus mino, Netuma thalassina, N. bilineata, Osteogeneiosus militaris, Plicofollis dussumieri, P. tenuispinis, Plotosus limbatus, and P. lineatus. Of the eleven species, two species A. gagora and N. bilineata were recorded for the first time and LWRs for four species A. gagora, N. bilineata, S. sona, and B. mino still have no data in the FishBase database. In addition, new maximum length for each of the three species N. bilineata, O. militaris and B. mino was also found.

Altitude exposures during commercial flight: a reappraisal.

Science.gov (United States)

Hampson, Neil B; Kregenow, David A; Mahoney, Anne M; Kirtland, Steven H; Horan, Kathleen L; Holm, James R; Gerbino, Anthony J

2013-01-01

Hypobaric hypoxia during commercial air travel has the potential to cause or worsen hypoxemia in individuals with pre-existing cardiopulmonary compromise. Knowledge of cabin altitude pressures aboard contemporary flights is essential to counseling patients accurately about flying safety. The objective of the study was to measure peak cabin altitudes during U.S. domestic commercial flights on a variety of aircraft. A handheld mountaineering altimeter was carried by the investigators in the plane cabin during commercial air travel and peak cabin altitude measured. The values were then compared between aircraft models, aircraft classes, and distances flown. The average peak cabin altitude on 207 flights aboard 17 different aircraft was 6341 +/- 1813 ft (1933 m +/- 553 m), significantly higher than when measured in a similar fashion in 1988. Peak cabin altitude was significantly higher for flights longer than 750 mi (7085 +/- 801 ft) compared to shorter flights (5160 +/- 2290 ft/1573 +/- 698 m). Cabin altitude increased linearly with flight distance for flights up to 750 mi in length, but was independent of flight distance for flights exceeding 750 mi. Peak cabin altitude was less than 5000 ft (1524 m) in 70% of flights shorter than 500 mi. Peak cabin altitudes greater than 8000 ft (2438 m) were measured on approximately 10% of the total flights. Peak cabin altitude on commercial aircraft flights has risen over time. Cabin altitude is lower with flights of shorter distance. Physicians should take these factors into account when determining an individual's need for supplemental oxygen during commercial air travel.

Should providers encourage realistic weight expectations and satisfaction with lost weight in commercial weight loss programs? a preliminary study.

Science.gov (United States)

Ames, Gretchen E; Thomas, Colleen S; Patel, Roshni H; McMullen, Jillian S; Lutes, Lesley D

2014-01-01

Attrition is a problem among patients who participate in commercial weight loss programs. One possible explanation is that if patients are unable to reach a weight that they expect to achieve, they may be more likely to drop out of treatment. This study investigated variables associated with attrition among 30 obese patients who completed a liquid meal replacement program (LMR) and enrolled in a 52-week Small Changes Maintenance intervention (SCM). Patients lost a median 18% of body weight during LMR and completed assessments about weight expectations and weight satisfaction pre- and post-SCM. Of the 30 patients who started SCM, 8 (27%) were lost to attrition. Odds of SCM attrition were higher in patients who lost ≤ 18.2% of pre-LMR weight (OR: 12.25, P = 0.035), had lower satisfaction (≤7) pre-SCM (OR: 10.11, P = 0.040), and who expected further weight loss of 9.1 kg or more pre-SCM (OR: 10.11, P = 0.040). SCM completers significantly increased weight loss expectations by a median of 2.3 kg from pre-SCM to post-SCM (WSR P = 0.049) that paralleled weight regained post-SCM (2.7 kg). After completion of a medically-supervised commercial weight loss program, patients with the greatest expectations for further weight loss and the lowest weight satisfaction were more likely to drop out of SCM. Failure to participate in maintenance treatment may lead to regain of greater than half of lost weight over the next year. Among SCM completers, lower expectations for further weight loss and greater weight satisfaction appeared to be associated with continued engagement in maintenance treatment.

CASH 2021: Commercial access and space habitation

Science.gov (United States)

Aldrin, Andrew; Amara, Adam; Aris, Lodewijk; Baierl, Nida; Beatty, Patrick; Beaulieu, Catherine; Behnke, Torsten; Castegini, Roberta; Chauhan, Amitabh; Cojanis, Philip; Dayawansa, Pelawa; Diop, Marie; Eito, Kinya; Engle, Steve; Ferretti, Stefano; Gassama, Hamet; Genova, Bojana; Goulding, Colin; Janjua, Jameel; Jansaeng, Thidarat; Jousset, Frédéric; Kopik, Anatoly; Laurin, Catherine; Leggatt, Jason; Li, Hengnian; Mezzadri, Monica; Miura, Amane; Nolet, Simon; Ogami, Satoshi; Patry, Johanne; Patten, Laryssa; Payerne, Cyril; Peer, Guy; Prampolini, Marco; Rheaume, Caroline; Saary, Joan; Spehar, Daniela; Sufi, Atiya; Sun, Baosheng; Thompson, J. Barry; Thomson, Ward; Trautner, Roland; Tursunmuratov, Murat; Venet, Vrata; Wilems, Elizabeth; Wilson, Helen; Wittwer, Karl; Wokke, Frank; Wu, Yansheng; Zhou, Shaobin; Zilioli, Ilaria

2002-07-01

Issues about commercialization of space have been a growing concern in the past decade for the space community. This paper focuses on the work from a team of 51 students attending the Summer Session Program of the International Space University in Bremen, Germany. CASH 2021 (Commercial Access and Space Habitation) documents a plan that identifies commercial opportunities for space utilization that will extend human presence in space, and will chart the way forward for the next 20 years. The group selected four commercial sectors that show the most promise for the future: tourism, entertainment, space system service, assembly and debris removal, and research and development/production. The content of this document presents the results of their research. Historical activities in each of the commercial sectors are reviewed along with the current market situation. To provide a coherent background for future commercialization possibilities a scenario has been developed. This scenario includes a postulated upon ideal future and includes social, political and economic factors that may affect the space industry over the timeline of the study. The study also presents a roadmap, within the limited optimistic scenario developed, for the successful commercialization of space leading to future human presence in space. A broad range of commercially viable opportunities, not only within the current limits of the International Space Station, but also among the many new developments that are expected by 2021 are discussed.

Mechanical properties of fiber reinforced restorative composite with two distinguished fiber length distribution.

Science.gov (United States)

Lassila, Lippo; Garoushi, Sufyan; Vallittu, Pekka K; Säilynoja, Eija

2016-07-01

The purpose of this study was to investigate the reinforcing effect of discontinuous glass fiber fillers with different length scales on fracture toughness and flexural properties of dental composite. Experimental fiber reinforced composite (Exp-FRC) was prepared by mixing 27wt% of discontinuous E-glass fibers having two different length scales (micrometer and millimeter) with various weight ratios (1:1, 2:1, 1:0 respectively) to the 23wt% of dimethacrylate based resin matrix and then 50wt% of silane treated silica filler were added gradually using high speed mixing machine. As control, commercial FRC and conventional posterior composites were used (everX Posterior, Alert, and Filtek Superme). Fracture toughness, work of fracture, flexural strength, and flexural modulus were determined for each composite material following ISO standards. The specimens (n=6) were dry stored (37°C for 2 days) before they were tested. Scanning electron microscopy was used to evaluate the microstructure of the experimental FRC composites. The results were statistically analyzed using ANOVA followed by post-hoc Tukey׳s test. Level of significance was set at 0.05. ANOVA revealed that experimental composites reinforced with different fiber length scales (hybrid Exp-FRC) had statistically significantly higher mechanical performance of fracture toughness (4.7MPam(1/2)) and flexural strength (155MPa) (plength scales of discontinues fiber fillers (hybrid) with polymer matrix yielded improved mechanical performance compared to commercial FRC and conventional posterior composites. Copyright © 2016 Elsevier Ltd. All rights reserved.

Advances in commercial ICF technology since 1986

International Nuclear Information System (INIS)

Kulcinski, G.L.

1989-01-01

Progress in the march toward commercial ICF fusion reactors has been uneven in the past few years. Considerable advances have been made in the area of light ion beam fusion through the development of rep ratable drivers (i.e., HERMES-III technology) and diodes (i.e., applied B configuration with renewable Li surfaces). Significant progress in the development of lasers to compress targets has also been made through the KrF Aurura program. The possibility of lowering the cost of glass in the advanced solid state lasers has been given serious consideration. The development of the Induced Spatial Incoherence (ISI) technique to improve the uniformity of the laser beam has allowed physicists and engineers to once again contemplate the use of symmetric illumination. This would reduce the driver energy required to achieve high gains but it also introduces difficulty in the reactor design. Relatively little progress in commercial heavy ion beam drivers has been made over the past few years aside from an indepth study (HIFSA) of the desirable operating regimes to be pursued. Other areas where little progress has been made are conceptual reactor studies, target declassification and specific experimental programs to address commercial ICF reactor technology needs

Clean Coal Technology Demonstration Program: Program update 1991 (as of December 31, 1991)

International Nuclear Information System (INIS)

1992-02-01

The Clean Coal Technology Demonstration Program (also referred to as the CCT Program) is a government and industry cofunded technology development effort to demonstrate a new generation of innovative coal utilization processes in a series of large-scale ''showcase'' facilities built across the country. The program takes the most promising advanced coal-based technologies and moves them into the commercial marketplace through demonstration. These demonstrations are on a scale large enough to generate all the data, from design, construction and operation, that are necessary for the private sector to judge commercial potential and make informed, confident decisions on commercial readiness. The CCT Program has been identified in the National Energy Strategy as major initiative supporting the strategy's overall goals to: increase efficiency of energy use; secure future energy supplies; enhance environmental quality; fortify foundations. The technologies being demonstrated under the CCT Program when commercially available will enable coal to reach its full potential as a source of energy for the nation and the international marketplace. The goal of the program is to furnish the US and international energy marketplaces with a number of advanced, highly efficient, and environmentally acceptable coal-using technologies

The commercialization of SIT

International Nuclear Information System (INIS)

Quinlan, Megan M.; Enkerlin, Walther

2003-01-01

The overwhelming majority of sterile insects for sterile insect technique (SIT) programs have been supplied by government facilities, although the private sector often participates in the field programs and sometimes provides substantial funding. As the demand for SIT has grown, government production facilities have sold sterile insects to other governments to use in their own programs. However, most of the production facilities are not organized as commercial ventures and have not been accounting for capital or possibly other fixed costs on top of the direct (variable) costs such as diet and transport. The biological nature of the product influences the best methods for figuring operational costs. Furthermore, unlike other liabilities and losses, a business cannot recover quickly from the unlikely but serious event of a lost breeding colony through an insurance claim, even if such insurance could be obtained. (author)

Computer modeling of commercial refrigerated warehouse facilities

International Nuclear Information System (INIS)

Nicoulin, C.V.; Jacobs, P.C.; Tory, S.

1997-01-01

The use of computer models to simulate the energy performance of large commercial refrigeration systems typically found in food processing facilities is an area of engineering practice that has seen little development to date. Current techniques employed in predicting energy consumption by such systems have focused on temperature bin methods of analysis. Existing simulation tools such as DOE2 are designed to model commercial buildings and grocery store refrigeration systems. The HVAC and Refrigeration system performance models in these simulations tools model equipment common to commercial buildings and groceries, and respond to energy-efficiency measures likely to be applied to these building types. The applicability of traditional building energy simulation tools to model refrigerated warehouse performance and analyze energy-saving options is limited. The paper will present the results of modeling work undertaken to evaluate energy savings resulting from incentives offered by a California utility to its Refrigerated Warehouse Program participants. The TRNSYS general-purpose transient simulation model was used to predict facility performance and estimate program savings. Custom TRNSYS components were developed to address modeling issues specific to refrigerated warehouse systems, including warehouse loading door infiltration calculations, an evaporator model, single-state and multi-stage compressor models, evaporative condenser models, and defrost energy requirements. The main focus of the paper will be on the modeling approach. The results from the computer simulations, along with overall program impact evaluation results, will also be presented

CFD modeling using PDF approach for investigating the flame length in rotary kilns

Science.gov (United States)

Elattar, H. F.; Specht, E.; Fouda, A.; Bin-Mahfouz, Abdullah S.

2016-12-01

Numerical simulations using computational fluid dynamics (CFD) are performed to investigate the flame length characteristics in rotary kilns using probability density function (PDF) approach. A commercial CFD package (ANSYS-Fluent) is employed for this objective. A 2-D axisymmetric model is applied to study the effect of both operating and geometric parameters of rotary kiln on the characteristics of the flame length. Three types of gaseous fuel are used in the present work; methane (CH4), carbon monoxide (CO) and biogas (50 % CH4 + 50 % CO2). Preliminary comparison study of 2-D modeling outputs of free jet flames with available experimental data is carried out to choose and validate the proper turbulence model for the present numerical simulations. The results showed that the excess air number, diameter of kiln air entrance, radiation modeling consideration and fuel type have remarkable effects on the flame length characteristics. Numerical correlations for the rotary kiln flame length are presented in terms of the studied kiln operating and geometric parameters within acceptable error.

Challenges in Commercial Buildings | Buildings | NREL

Science.gov (United States)

systems Assessing the energy and economic impacts of various technologies, giving priority to those that standardized language for commercial building energy audit data that can be used by software developers to exchange data between audit tools, and can be required by building owners and audit program managers to

ENERGY STAR Certified Commercial Hot Food Holding Cabinet

Data.gov (United States)

U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 2.0 ENERGY STAR Program Requirements for Commercial Hot Food Holding Cabinets that are...

The influence of finite-length flaw effects on PTS analyses

International Nuclear Information System (INIS)

Keeney-Walker, J.; Dickson, T.L.

1993-01-01

Current licensing issues within the nuclear industry dictate a need to investigate the effects of cladding on the extension of small finite-length cracks near the inside surface of a vessel. Because flaws having depths of the order of the combined clad and heat affected zone thickness dominate the frequency distribution of flaws, their initiation probabilities can govern calculated vessel failure probabilities. Current pressurized-thermal-shock (PTS) analysis computer programs recognize the influence of the inner-surface cladding layer in the heat transfer and stress analysis models, but assume the cladding fracture toughness is the same as that for the base material. The programs do not recognize the influence cladding may have in inhibiting crack initiation and propagation of shallow finite-length surface flaws. Limited experimental data and analyses indicate the cladding can inhibit the propagation of certain shallow flaws. This paper describes an analytical study which was carried out to determine (1) the minimum flaw depth for crack initiation under PTS loading for semicircular surface flaws in a clad reactor pressure vessel and (2) the impact, in terms of the conditional probability of vessel failure, of using a semicircular surface flaw as the initial flaw and assuming that the flaw cannot propagate in the cladding. The analytical results indicate that for initiation a much deeper critical crack depth is required for the finite-length flaw than for the infinite-length flaw, except for the least severe transient. The minimum flaw depths required for crack initiation from the finite-length flaw analyses were incorporated into a modified version of the OCA-P code. The modified code was applied to the analysis of selected PTS transients, and the results produced a substantial decrease in the conditional probability of failure. This initial study indicates a significant effect on probabilistic fracture analyses by incorporating finite-length flaw results

Development of the Heated Length Correction Factor

International Nuclear Information System (INIS)

Park, Ho-Young; Kim, Kang-Hoon; Nahm, Kee-Yil; Jung, Yil-Sup; Park, Eung-Jun

2008-01-01

The Critical Heat Flux (CHF) on a nuclear fuel is defined by the function of flow channel geometry and flow condition. According to the selection of the explanatory variable, there are three hypotheses to explain CHF at uniformly heated vertical rod (inlet condition hypothesis, exit condition hypothesis, local condition hypothesis). For inlet condition hypothesis, CHF is characterized by function of system pressure, rod diameter, rod length, mass flow and inlet subcooling. For exit condition hypothesis, exit quality substitutes for inlet subcooling. Generally the heated length effect on CHF in exit condition hypothesis is smaller than that of other variables. Heated length is usually excluded in local condition hypothesis to describe the CHF with only local fluid conditions. Most of commercial plants currently use the empirical CHF correlation based on local condition hypothesis. Empirical CHF correlation is developed by the method of fitting the selected sensitive local variables to CHF test data using the multiple non-linear regression. Because this kind of method can not explain physical meaning, it is difficult to reflect the proper effect of complex geometry. So the recent CHF correlation development strategy of nuclear fuel vendor is making the basic CHF correlation which consists of basic flow variables (local fluid conditions) at first, and then the geometrical correction factors are compensated additionally. Because the functional forms of correction factors are determined from the independent test data which represent the corresponding geometry separately, it can be applied to other CHF correlation directly only with minor coefficient modification

Levels of safety satisfactory for commercialization of the breeder

International Nuclear Information System (INIS)

Ferguson, R.L.

1979-01-01

A brief discussion is presented of the Department of Energy's LMFBR safety program and the safety levels which DOE believes would be satisfactory for the commercialization of the breeder are indicated. Some observations are offered on the Three Mile Island accident and some of its implications are discussed for the LMFBR program

Dynamic partnership: A new approach to EM technology commercialization and deployment

International Nuclear Information System (INIS)

Daly, D.J.; Erickson, T.A.; Groenewold, G.H.

1996-01-01

The task of restoring nuclear defense complex sites under the U.S. Department of Energy (DOE) Environmental Management (EM) Program presents an unprecedented challenge to the environmental restoration community. Effective and efficient cleanup requires the timely development or modification of novel cleanup technologies applicable to radioactive wastes. Fostering the commercialization of these innovative technologies is the mission of EM-50, the EM Program Office of Science and Technology. However, efforts are often arrested at the open-quotes valley of death,close quotes the general term for barriers to demonstration, commercialization, and deployment. The Energy ampersand Environmental Research Center (EERC), a not-for-profit, contract-supported organization focused on research, development, demonstration, and commercialization (RDD ampersand C) of energy and environmental technologies, is in the second year of a cooperative agreement with the U.S. Department of Energy (DOE) Morgantown Energy Technology Center (METC) designed to deliver EM technologies into the commercial marketplace through a unique combination of technical support, real-world demonstration, and brokering. This paper profiles this novel approach, termed open-quotes Dynamic Partnership,close quotes and reviews the application of this concept to the ongoing commercialization and deployment of four innovative cleanup technologies. 2 tabs

Commercialization and business development of grid-connected PV at SMUD

International Nuclear Information System (INIS)

Osborn, D.E.

1998-01-01

SMUD has completed its first 5 year, 6 MW PV commercialization effort based on the sustained, orderly development of the utility PV market. SMUD has begun a 5 year, 10 MW program designed to complete a process that will result in PV being at a market competitive price by 2002 and as a sustainable business opportunity for SMUD. As part of this effort, by the end of 1997, SMUD had installed over 450 PV systems totaling 6 MW. These included over 420 residential rooftop systems as well as commercial buildings, parking lots and substation systems. Under its new Business Plan, SMUD has signed contracts for an additional 10 MW of PV systems for 1998 through 2002 with cost decreasing to less than $3/W. As part of its new competitive business strategy responding to changes the utility industry is undergoing, SMUD has incorporated PV as a key business opportunity. SMUD has established partnerships with its customers through the PV Pioneer green pricing program, with DOE and UPVG through TEAM-UP and Million Solar Roofs to advance PV commercialization and to develop rooftops as PV power plant sites and with other utilities through its PV Partnership program

Wildfire fuel harvesting and resultant biomass utilization using a cut-to-length/small chipper system

Science.gov (United States)

M. Chad Bolding; Bobby L. Lanford

2005-01-01

Currently, there is a lack of information concerning mechanical forest fuel reduction. This study examined and measured the feasibility of ground-based mechanical harvesting to reduce forest fuel buildup and produce energywood. Cut-to-length (CTL) harvesting coupled with a small in-woods chipper provided a low impact way to harvest pre-commercial trees and tops along...

45 CFR 74.82 - Program income.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Program income. 74.82 Section 74.82 Public Welfare... COMMERCIAL ORGANIZATIONS Special Provisions for Awards to Commercial Organizations § 74.82 Program income. The additional costs alternative described in § 74.24(b)(1) may not be applied to program income...

Time-dependent evolution of strand transfer length in pretensioned prestressed concrete members

Science.gov (United States)

Caro, L. A.; Martí-Vargas, J. R.; Serna, P.

2013-11-01

For design purposes, it is generally considered that prestressing strand transfer length does not change with time. However, some experimental studies on the effect of time on transfer lengths show contradictory results. In this paper, an experimental research to study transfer length changes over time is presented. A test procedure based on the ECADA testing technique to measure prestressing strand force variation over time in pretensioned prestressed concrete specimens has been set up. With this test method, an experimental program that varies concrete strength, specimen cross section, age of release, prestress transfer method, and embedment length has been carried out. Both the initial and long-term transfer lengths of 13-mm prestressing steel strands have been measured. The test results show that transfer length variation exists for some prestressing load conditions, resulting in increased transfer length over time. The applied test method based on prestressing strand force measurements has shown more reliable results than procedures based on measuring free end slips and longitudinal strains of concrete. An additional factor for transfer length models is proposed in order to include the time-dependent evolution of strand transfer length in pretensioned prestressed concrete members.

The epizootiology of Eimeria infections in commercial broiler chickens where anticoccidial drug programs were employed in six successive flocks to control coccidiosis.

Science.gov (United States)

Chapman, H D; Barta, J R; Hafeez, M A; Matsler, P; Rathinam, T; Raccoursier, M

2016-08-01

The course of natural Eimeria infections in 6 successive broiler flocks at a commercial farm comprising 4 houses, where different anticoccidial drug programs were employed, was studied by counting the number of oocysts in the litter at weekly intervals. The course of infection in all flocks followed a bell shaped curve in which oocyst numbers, initially low, increased to a peak ranging from 36 × 10(3) to 74 × 10(3) oocysts/g (OPG) of litter around 3 to 4 wk of age. Numbers subsequently declined to 3 × 10(3) to 15 × 10(3) OPG. Oocysts could be detected between flocks when birds were not present. Species of Eimeria identified included E. acervulina, E. maxima, and E. tenella Despite the presence of large numbers of oocysts in the litter, coccidial lesions were not observed in the intestines of the birds. The performance of broilers at the study site was comparable to that of other farms in the area where birds from the same settlement were reared to a similar age using the same drug programs. The results indicate the ubiquitous nature of Eimeria spp. infections in commercial broilers despite prophylactic medication. © 2016 Poultry Science Association Inc.

Occupational health and safety among commercial sex workers.

Science.gov (United States)

Ross, Michael W; Crisp, Beth R; Månsson, Sven-Axel; Hawkes, Sarah

2012-03-01

The concept of occupational health and safety (OHS) for commercial sex workers has rarely been investigated, perhaps because of the often informal nature of the workplace, the associated stigma, and the frequently illegal nature of the activity. We reviewed the literature on health, occupational risks, and safety among commercial sex workers. Cultural and local variations and commonalities were identified. Dimensions of OHS that emerged included legal and policing risks, risks associated with particular business settings such as streets and brothels, violence from clients, mental health risks and protective factors, alcohol and drug use, repetitive strain injuries, sexually transmissible infections, risks associated with particular classes of clients, issues associated with male and transgender commercial sex workers, and issues of risk reduction that in many cases are associated with lack of agency or control, stigma, and legal barriers. We further discuss the impact and potential of OHS interventions for commercial sex workers. The OHS of commercial sex workers covers a range of domains, some potentially modifiable by OHS programs and workplace safety interventions targeted at this population. We argue that commercial sex work should be considered as an occupation overdue for interventions to reduce workplace risks and enhance worker safety.

Cycle length maximization in PWRs using empirical core models

International Nuclear Information System (INIS)

Okafor, K.C.; Aldemir, T.

1987-01-01

The problem of maximizing cycle length in nuclear reactors through optimal fuel and poison management has been addressed by many investigators. An often-used neutronic modeling technique is to find correlations between the state and control variables to describe the response of the core to changes in the control variables. In this study, a set of linear correlations, generated by two-dimensional diffusion-depletion calculations, is used to find the enrichment distribution that maximizes cycle length for the initial core of a pressurized water reactor (PWR). These correlations (a) incorporate the effect of composition changes in all the control zones on a given fuel assembly and (b) are valid for a given range of control variables. The advantage of using such correlations is that the cycle length maximization problem can be reduced to a linear programming problem

Course Length Versus Course Price: Marketing Factors in Program Planning.

Science.gov (United States)

Lamoureux, Marvin E.

Recent program planning literature involving adult education has attempted to draw upon techniques from marketing management. Most of the literature has, however, not explored the relationship between adult education program decision needs and fundamental marketing concepts. Adult educators and marketing managers are conducting similar daily…

Effective strategies to reduce commercial tobacco use in Indigenous communities globally: A systematic review.

Science.gov (United States)

Minichiello, Alexa; Lefkowitz, Ayla R F; Firestone, Michelle; Smylie, Janet K; Schwartz, Robert

2016-01-11

All over the world, Indigenous populations have remarkably high rates of commercial tobacco use compared to non-Indigenous groups. The high rates of commercial tobacco use in Indigenous populations have led to a variety of health issues and lower life expectancy than the general population. The objectives of this systematic review were to investigate changes in the initiation, consumption and quit rates of commercial tobacco use as well as changes in knowledge, prevalence, community interest, and smoke-free environments in Indigenous populations. We also aimed to understand which interventions had broad reach, what the common elements that supported positive change were and how Aboriginal self-determination was reflected in program implementation. We undertook a systematic review of peer-reviewed publications and grey literature selected from seven databases and 43 electronic sources. We included studies between 1994 and 2015 if they addressed an intervention (including provision of a health service or program, education or training programs) aimed to reduce the use of commercial tobacco use in Indigenous communities globally. Systematic cross-regional canvassing of informants in Canada and internationally with knowledge of Indigenous health and/or tobacco control provided further leads about commercial tobacco reduction interventions. We extracted data on program characteristics, study design and learnings including successes and challenges. In the process of this review, we investigated 73 commercial tobacco control interventions in Indigenous communities globally. These interventions incorporated a myriad of activities to reduce, cease or protect Indigenous peoples from the harms of commercial tobacco use. Interventions were successful in producing positive changes in initiation, consumption and quit rates. Interventions also facilitated increases in the number of smoke-free environments, greater understandings of the harms of commercial tobacco use and a

Commercial Aircraft Development and the Export Market

Science.gov (United States)

Snodgrass, J.

1972-01-01

The various factors which endanger the future of commercial aircraft development are defined. The factors discussed are: (1) a decline in federally funded research and development programs, (2) a general decline in the economic health of the domestic airlines, (3) the increased cost of development which may be several times the net worth of the company, (4) the development overseas of common market and manufacturing consortia, and (5) foreign manufacturers receiving significant financial support from their national governments. It is stated that unless immediate and innovative solutions to combat these factors are found, the commercial aviation industry will be in serious difficulty.

Commercial Building Energy Asset Score System: Program Overview and Technical Protocol (Version 1.0)

Energy Technology Data Exchange (ETDEWEB)

Wang, Na; Gorrissen, Willy J.

2013-01-11

The U.S. Department of Energy (DOE) is developing a national voluntary energy asset score system that includes an energy asset score tool to help building owners evaluate their buildings with respect to the score system. The goal of the energy asset score system is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system will allow building owners and managers to compare their building infrastructure against peers and track building upgrade progress over time. The system can also help other building stakeholders (e.g., building operators, tenants, financiers, and appraisers) understand the relative efficiency of different buildings in a way that is independent from their operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset score tool. This report also describes alternative methods that were considered prior to developing the current approach. Finally, this report describes a few features of the program where alternative approaches are still under evaluation.

Commercialization of technology in MINT

International Nuclear Information System (INIS)

Daud Mohamad; Razali Hamzah

2005-01-01

Full text:The Malaysian Institute for Nuclear Technology Research (MINT), was officially established in 1972 (PUSPATI as it was known then) and has progressed leaps and bounds to become one of the country's leading research organization particularly in the field of nuclear science and technology. Primarily set up as a full fledge research and development entity with one of the initial aims was looking into the possibility of embarking in the generation of power via the use of nuclear technology as an alternative source of energy for the nation. MINTs role has somewhat changed in tandem with her stage of development and national priorities. In line with the Government's policy on sustainability and self-reliance and a drive to commercialize R and D findings, the R and D institutions are expected to be self sufficiency at 30% of institutional operating budget. MINT has embarked on the commercialization program since in 1987 even before the the policy was instituted. Unlike other corporate R and D institutions and universities which do have some liberty and flexibility in the management of the organizations, MINT as a full fledge government R and D institute faces a number of challenges in the commercialization exercise. The paper describes the technologies developed at MINT, our product and services, and challenges and limitations in commercializing our R and D endeavors. (Author)

Overview of Commercial Building Partnerships in Higher Education

Energy Technology Data Exchange (ETDEWEB)

Schatz, Glenn [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

2013-03-01

Higher education uses less energy per square foot than most commercial building sectors. However, higher education campuses house energy-intensive laboratories and data centers that may spend more than this average; laboratories, in particular, are disproportionately represented in the higher education sector. The Commercial Building Partnership (CBP), a public/private, cost-shared program sponsored by the U.S. Department of Energy (DOE), paired selected commercial building owners and operators with representatives of DOE, its national laboratories, and private-sector technical experts. These teams explored energy-saving measures across building systems–including some considered too costly or technologically challenging–and used advanced energy modeling to achieve peak whole-building performance. Modeling results were then included in new construction or retrofit designs to achieve significant energy reductions.

Commercialization is Required for Sustainable Space Exploration and Development

Science.gov (United States)

Martin, Gary L.; Olson, John M.

2009-01-01

The U.S. Space Exploration policy outlines an exciting new direction in space for human and robotic exploration and development beyond low Earth orbit. Pressed by this new visionary guidance, human civilization will be able to methodically build capabilities to move off Earth and into the solar system in a step-by-step manner, gradually increasing the capability for humans to stay longer in space and move further away from Earth. The new plans call for an implementation that would create an affordable and sustainable program in order to span over generations of explorers, each new generation pushing back the boundaries and building on the foundations laid by the earlier. To create a sustainable program it is important to enable and encourage the development of a selfsupporting commercial space industry leveraging both traditional and non-traditional segments of the industrial base. Governments will not be able to open the space frontier on their own because their goals change over relatively short timescales and because the large costs associated with human spaceflight cannot be sustained. A strong space development industrial sector is needed that can one day support the needs of commercial space enterprises as well as provide capabilities that the National Aeronautics and Space Administration (NASA) and other national space agencies can buy to achieve their exploration goals. This new industrial space sector will someday provide fundamental capabilities like communications, power, logistics, and even cargo and human space transportation, just as commercial companies are able to provide these services on Earth today. To help develop and bolster this new space industrial sector, NASA and other national space agencies can enable and facilitate it in many ways, including reducing risk by developing important technologies necessary for commercialization of space, and as a paying customer, partner, or anchor tenant. This transition from all or mostly government

Commercial French in a Liberal Arts Setting.

Science.gov (United States)

Abrate, Jayne

Drury College (Missouri) has developed a commercial French course that is practical, situation-oriented, and provides instruction in correspondence and translation. The course is considered part of the cultural segment of the French program. It enrolls majors in business, French, and a variety of other disciplines, and emphasizes contextual…

Maritime security report. November 2000 [Commercial maritime drug smuggling

Science.gov (United States)

2000-11-01

Port and security programs being implemented in Colombia's port facilities, maritime jurisdictions, and the marine intermodal shipping cycle are producing successful results against commercial maritime drug smuggling. This security reports examines t...

Genetic Gain and Inbreeding from Genomic Selection in a Simulated Commercial Breeding Program for Perennial Ryegrass

Directory of Open Access Journals (Sweden)

Zibei Lin

2016-03-01

Full Text Available Genomic selection (GS provides an attractive option for accelerating genetic gain in perennial ryegrass ( improvement given the long cycle times of most current breeding programs. The present study used simulation to investigate the level of genetic gain and inbreeding obtained from GS breeding strategies compared with traditional breeding strategies for key traits (persistency, yield, and flowering time. Base population genomes were simulated through random mating for 60,000 generations at an effective population size of 10,000. The degree of linkage disequilibrium (LD in the resulting population was compared with that obtained from empirical studies. Initial parental varieties were simulated to match diversity of current commercial cultivars. Genomic selection was designed to fit into a company breeding program at two selection points in the breeding cycle (spaced plants and miniplot. Genomic estimated breeding values (GEBVs for productivity traits were trained with phenotypes and genotypes from plots. Accuracy of GEBVs was 0.24 for persistency and 0.36 for yield for single plants, while for plots it was lower (0.17 and 0.19, respectively. Higher accuracy of GEBVs was obtained for flowering time (up to 0.7, partially as a result of the larger reference population size that was available from the clonal row stage. The availability of GEBVs permit a 4-yr reduction in cycle time, which led to at least a doubling and trebling genetic gain for persistency and yield, respectively, than the traditional program. However, a higher rate of inbreeding per cycle among varieties was also observed for the GS strategy.

Genetic Gain and Inbreeding from Genomic Selection in a Simulated Commercial Breeding Program for Perennial Ryegrass.

Science.gov (United States)

Lin, Zibei; Cogan, Noel O I; Pembleton, Luke W; Spangenberg, German C; Forster, John W; Hayes, Ben J; Daetwyler, Hans D

2016-03-01

Genomic selection (GS) provides an attractive option for accelerating genetic gain in perennial ryegrass () improvement given the long cycle times of most current breeding programs. The present study used simulation to investigate the level of genetic gain and inbreeding obtained from GS breeding strategies compared with traditional breeding strategies for key traits (persistency, yield, and flowering time). Base population genomes were simulated through random mating for 60,000 generations at an effective population size of 10,000. The degree of linkage disequilibrium (LD) in the resulting population was compared with that obtained from empirical studies. Initial parental varieties were simulated to match diversity of current commercial cultivars. Genomic selection was designed to fit into a company breeding program at two selection points in the breeding cycle (spaced plants and miniplot). Genomic estimated breeding values (GEBVs) for productivity traits were trained with phenotypes and genotypes from plots. Accuracy of GEBVs was 0.24 for persistency and 0.36 for yield for single plants, while for plots it was lower (0.17 and 0.19, respectively). Higher accuracy of GEBVs was obtained for flowering time (up to 0.7), partially as a result of the larger reference population size that was available from the clonal row stage. The availability of GEBVs permit a 4-yr reduction in cycle time, which led to at least a doubling and trebling genetic gain for persistency and yield, respectively, than the traditional program. However, a higher rate of inbreeding per cycle among varieties was also observed for the GS strategy. Copyright © 2016 Crop Science Society of America.

Financial Statements as Monitoring Mechanisms: Evidence from Small Commercial Loans

OpenAIRE

Minnis, Michael; Sutherland, Andrew Gordon

2016-01-01

Using a data set that records banks’ ongoing requests of information from small commercial borrowers, we examine when banks use financial statements to monitor borrowers after loan origination. We find that banks request financial statements for half the loans and this variation is related to borrower credit risk, relationship length, collateral, and the provision of business tax returns, but in complex ways. The relation between borrower risk and financial statement requests has an inverted ...

A Military and Industry Partnership Program: The Transfer of Military Simulation Technology Into Commercial Industry

National Research Council Canada - National Science Library

McGuire, William

1997-01-01

This research thesis is a study through a military commercial industry partnership to seek whether investments in military modeling and simulation can be easily transferred to benefit commercial industry...

Methodology for the National Water Savings Model and Spreadsheet Tool Commercial/Institutional

Energy Technology Data Exchange (ETDEWEB)

Chan, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Long, Tim [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Alison [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Melody, Moya [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-01-01

Lawrence Berkeley National Laboratory (LBNL) has developed a mathematical model to quantify the water and monetary savings attributable to the United States Environmental Protection Agency’s (EPA’s) WaterSense labeling program for commercial and institutional products. The National Water Savings–Commercial/Institutional (NWS-CI) model is a spreadsheet tool with which the EPA can evaluate the success of its program for encouraging buyers in the commercial and institutional (CI) sectors to purchase more water-efficient products. WaterSense has begun by focusing on three water-using products commonly used in the CI sectors: flushometer valve toilets, urinals, and pre-rinse spray valves. To estimate the savings attributable to WaterSense for each of the three products, LBNL applies an accounting method to national product shipments and lifetimes to estimate the shipments of each product.

Building Technologies Program Multi-Year Program Plan Research and Development 2008

Energy Technology Data Exchange (ETDEWEB)

None, None

2008-01-01

Building Technologies Program Multi-Year Program Plan 2008 for research and development, including residential and commercial integration, lighting, HVAC and water heating, envelope, windows, and analysis tools.

FIRST STEP towards ICF commercialization

International Nuclear Information System (INIS)

Saylor, W.W.; Pendergrass, J.H.; Dudziak, D.J.

1984-01-01

Production of tritium for weapons and fusion R and D programs and successful development of Inertial Confinement Fusion (ICF) technologies are important national goals. A conceptual design for an ICF facility to meet these goals is presented. FIRST STEP (Fusion, Inertial, Reduced-Requirements Systems Test for Special Nuclear Material, Tritium, and Energy Production) is a concept for a plant to produce SNM, tritium, and energy while serving as a test bed for ICF technology development. A credible conceptual design for an ICF SNM and tritium production facility that competes favorably with fission technology on the bases of cost, production quality, and safety was sought. FIRST STEP is also designed to be an engineering test facility that integrates systems required for an ICF power plant and that is intermediate in scale between proof-of-principle experiment and commercial power plant. FIRST STEP driver and pellet performance requirements are moderate and represent reasonable intermediate goals in an R and D plan for ICF commercialization. Repetition rate requirements for FIRST STEP are similar to those of commercial size plants and FIRST STEP can be used to integrate systems under realistic ICF conditions

Review of Literature for Inputs to the National Water Savings Model and Spreadsheet Tool-Commercial/Institutional

Energy Technology Data Exchange (ETDEWEB)

Whitehead, Camilla Dunham; Melody, Moya; Lutz, James

2009-05-29

Lawrence Berkeley National Laboratory (LBNL) is developing a computer model and spreadsheet tool for the United States Environmental Protection Agency (EPA) to help estimate the water savings attributable to their WaterSense program. WaterSense has developed a labeling program for three types of plumbing fixtures commonly used in commercial and institutional settings: flushometer valve toilets, urinals, and pre-rinse spray valves. This National Water Savings-Commercial/Institutional (NWS-CI) model is patterned after the National Water Savings-Residential model, which was completed in 2008. Calculating the quantity of water and money saved through the WaterSense labeling program requires three primary inputs: (1) the quantity of a given product in use; (2) the frequency with which units of the product are replaced or are installed in new construction; and (3) the number of times or the duration the product is used in various settings. To obtain the information required for developing the NWS-CI model, LBNL reviewed various resources pertaining to the three WaterSense-labeled commercial/institutional products. The data gathered ranged from the number of commercial buildings in the United States to numbers of employees in various sectors of the economy and plumbing codes for commercial buildings. This document summarizes information obtained about the three products' attributes, quantities, and use in commercial and institutional settings that is needed to estimate how much water EPA's WaterSense program saves.

Managing the nation's commercial high-level radioactive waste

International Nuclear Information System (INIS)

1985-03-01

This report presents the findings and conclusions of OTA's analysis of Federal policy for the management of commercial high-level radioactive waste. It represents a major update and expansion of the Analysis presented to Congress in our summary report, Managing Commercial High-Level Radioactive Waste, published in April of 1982 (NWPA). This new report is intended to contribute to the implementation of NWPA, and in particular to Congressional review of three major documents that DOE will submit to the 99th Congress: a Mission Plan for the waste management program; a monitored retrievable storage (MRS) proposal; and a report on mechanisms for financing and managing the waste program. The assessment was originally focused on the ocean disposal of nuclear waste. OTA later broadened the study to include all aspects of high-level waste disposal. The major findings of the original analysis were published in OTA's 1982 summary report

Role of the consolidated fuel reprocessing program in the United States Breeder Reactor Program

International Nuclear Information System (INIS)

Ballard, W.W.; Burch, W.D.

1980-01-01

While present US policy precludes the commercial reprocessing of LWR fuels and the recycle of plutonium, the policy does encompass the need to continue a program to develop the technology for reprocessing breeder fuels. Some questions have again risen this year as to the pace of the entire breeder program, including recycle, and the answers are evolving. This paper and the other companion papers which describe several aspects of the Consolidated Fuel Reprocessing Program take a longer-range perspective on the total program. Whether the program is implemented in the general time frame described is dependent on future government actions dedicated to carrying out a systematic program that would permit breeders to be commercialized early in the next century

23 CFR Appendix D to Part 658 - Devices That Are Excluded From Measurement of the Length or Width of a Commercial Motor Vehicle

Science.gov (United States)

2010-04-01

...; (v) Tarp basket; (w) Tire carrier; and (x) Uppercoupler. 2. Devices excluded from length measurement... measurement are side rails running the length of the vehicle and rear doors, provided the only function of the...

Data bank for short-length red oak lumber

Science.gov (United States)

Janice K. Wiedenbeck; Charles J. Gatchell; Elizabeth S. Walker

1994-01-01

This data bank for short-length lumber (less than 8 feet long) contains information on board outlines and defect size and quality for 426 414-inch-thick red oak boards. The Selects, 1 Common, 2A Common, and 3A Common grades are represented in the data bank. The data bank provides the kind of detailed lumber description that is required as input by computer programs...

Thermocouples calibration and analysis of the influence of the length of the sensor coating

International Nuclear Information System (INIS)

Noriega, M; Ramírez, R; López, R; Vaca, M; Morales, J; Terres, H; Lizardi, A; Chávez, S

2015-01-01

This paper presents the design and construction of a lab prototype, with a much lower cost compared to the ones commercially sold, enabling the manufacture of thermocouples which are then calibrated to verify their functionality and acceptance. We also analyze the influence of the external insulation over the wires, to determine whether it influences temperature measurement. The tested lengths ranged from 0.00 m up to 0.030 m. The thermocouple was compared against the behavior of a thermocouple of the same type that was purchased with a commercial supplier. The obtained measurement showed less than 1 °C difference in some points. This makes the built thermocouple reliable, since the standard allows a difference of up to 2.2 °C

On the Traceability of Commercial Saffron Samples Using 1H-NMR and FT-IR Metabolomics

Directory of Open Access Journals (Sweden)

Roberto Consonni

2016-02-01

Full Text Available In previous works on authentic samples of saffron of known history (harvest and processing year, storage conditions, and length of time some biomarkers were proposed using both FT-IR and NMR metabolomics regarding the shelf life of the product. This work addresses the difficulties to trace back the “age” of commercial saffron samples of unknown history, sets a limit value above which these products can be considered substandard, and offers a useful tool to combat saffron mislabeling and fraud with low-quality saffron material. Investigations of authentic and commercial saffron samples of different origin and harvest year, which had been stored under controlled conditions for different lengths of time, allowed a clear-cut clustering of samples in two groups according to the storage period irrespectively of the provenience. In this respect, the four-year cut off point proposed in our previous work assisted to trace back the “age” of unknown samples and to check for possible mislabeling practices.

The length-weight and length-length relationships of bluefish, Pomatomus saltatrix (Linnaeus, 1766) from Samsun, middle Black Sea region

OpenAIRE

Özpiçak, Melek; Saygın, Semra; Polat, Nazmi

2017-01-01

In this study, length-weight relationship (LWR) and length-length relationship (LLR) of bluefish,Pomatomus saltatrix were determined. A total of 125 specimens were sampled from Samsun, themiddle Black Sea in 2014 fishing season. Bluefish specimens were monthly collected fromcommercial fishing boats from October to December 2014. All captured individuals (N=125) weremeasured to the nearest 0.1 cm for total, fork and standard lengths. The weight of each fish (W)was recorded to the nearest 0.01 ...

MPRS (URBOT) commercialization

Science.gov (United States)

Ciccimaro, Donny; Baker, William; Hamilton, Ian; Heikkila, Leif; Renick, Joel

2003-09-01

The Man Portable Robotic System (MPRS) project objective was to build and deliver hardened robotic systems to the U.S. Army"s 10 Mountain Division in Fort Drum, New York. The system, specifically designed for tunnel and sewer reconnaissance, was equipped with visual and audio sensors that allowed the Army engineers to detect trip wires and booby traps before personnel entered a potentially hostile environment. The MPRS system has shown to be useful in government and military supported field exercises, but the system has yet to reach the hands of civilian users. Potential users in Law Enforcement and Border Patrol have shown a strong interest in the system, but robotic costs were thought to be prohibitive for law enforcement budgets. Through the Center for Commercialization of Advanced Technology (CCAT) program, an attempt will be made to commercialize the MPRS. This included a detailed market analysis performed to verify the market viability of the technologies. Hence, the first step in this phase is to fully define the marketability of proposed technologies in terms of actual market size, pricing and cost factors, competitive risks and/or advantages, and other key factors used to develop marketing and business plans.

EVALUATING COMMERCIALLY AVAILABLE DERMAL ...

Science.gov (United States)

As the Human Exposure Program focuses on the exposure of children to pesticides, there are concerns about the effect, or perceived effect, of components of the sampling procedure on the health and well-being of the infant and the ability to collect pesticide residues. One concern involves the materials in wipes used to collect pesticide residues or other contact materials on the skin. In recent studies (e.g., National Human Exposure Assessment Survey; NHEXAS), isopropyl alcohol has been used as a solvent in conjunction with a cloth wipe to obtain samples from the hands of adults and children. Although isopropyl alcohol is generally considered innocuous, the use of commercially available products could eliminate concerns about exposure to alcohol. A few studies have evaluated the potential of commercially available baby wipes to collect personal exposure samples for metals research, but not for the area of pesticide research (Millson et al., 1994; Campbell et al., 1993; Lichtenwalner et al., 1993). Therefore, there is a need to evaluate the potential for using commercially available baby wipes for collecting pesticide samples from skin and other surfaces. Another concern involves establishing a convenient and safe method for assessing overall dermal exposure for children, especially for those in crawling stage. One route that the U .S. Environmental Protection Agency (EPA) would like to investigate is the use of cotton body suits (infant sleepers) as an indicator

An Examination of How the Availability of State-backed Terrorism Insurance Programs and Commercial Terrorism Insurance Affects the Operational Decisions of Multinational Companies.

OpenAIRE

GREY, William / WJG

2011-01-01

This dissertation explores the extent to which the operational decisions of multinational companies (MNCs) are affected by the availability of State-backed terrorism insurance programs and commercial terrorism insurance. The initial hypothesis made is that MNCs will be reluctant to invest in zones or countries with high terrorism or political risks, especially when insurance for these risks may be limited or unavailable. This investigation finds that the availability of State-backed terrorism...

The importance of chain length for the polyphosphate enhancement of acidic potassium permanganate chemiluminescence.

Science.gov (United States)

Holland, Brendan J; Adcock, Jacqui L; Nesterenko, Pavel N; Peristyy, Anton; Stevenson, Paul G; Barnett, Neil W; Conlan, Xavier A; Francis, Paul S

2014-09-09

Sodium polyphosphate is commonly used to enhance chemiluminescence reactions with acidic potassium permanganate through a dual enhancement mechanism, but commercially available polyphosphates vary greatly in composition. We have examined the influence of polyphosphate composition and concentration on both the dual enhancement mechanism of chemiluminescence intensity and the stability of the reagent under analytically useful conditions. The average chain length (n) provides a convenient characterisation, but materials with similar values can exhibit markedly different distributions of phosphate oligomers. There is a minimum polyphosphate chain length (∼6) required for a large enhancement of the emission intensity, but no further advantage was obtained using polyphosphate materials with much longer average chain lengths. Providing there is a sufficient average chain length, the optimum concentration of polyphosphate is dependent on the analyte and in some cases, may be lower than the quantities previously used in routine detection. However, the concentration of polyphosphate should not be lowered in permanganate reagents that have been partially reduced to form high concentrations of the key manganese(III) co-reactant, as this intermediate needs to be stabilised to prevent formation of insoluble manganese(IV). Copyright © 2014 Elsevier B.V. All rights reserved.

Aspects of sexual precocity and morphometry of uterus, placenta and embryos/fetuses in Piau breed and Commercial line gilts.

Science.gov (United States)

Montes, José Carlos; Penitente-Filho, Jurandy Mauro; Guimarães, Simone Eliza Facioni; Lopes, Paulo Sávio; Camilo, Breno Soares; Shiomi, Hugo Hideki; Lima, Daniel Araújo; Pinho, Rogério Oliveira; Pereira, Jhonata Vieira Tavares do Nascimento; Okano, Denise Silva; Costa, Karine Assis; Guimarães, José Domingos

2018-01-01

In view of the importance of the genetic material of local breeds in the swine industry and the lack of information about reproductive performance of Piau females, two experiments were conducted to evaluate puberty and sexual maturity as well as the morphometry of embryos/fetuses, placenta and uterus during the first 90 days of gestation in Piau breed and Commercial line gilts. In experiment I, 37 Piau and 25 commercial line gilts were used. From the 120 days of age, detection of estrus was performed using mature boars from the first to third estrus of each gilt. Data regarding to age, body weight and estrus duration were recorded. After third estrus, females were slaughtered and ovaries were collected to determine ovulation rate. In experiment II, 36 Piau and 18 commercial line gilts were distributed into three groups according to the mating: Commercial, commercial line females x commercial line male; cross-mated, Piau females x commercial line male; and Piau, Piau females x Piau male. Gilts were slaughtered at 7, 15, 30, 45, 60 and 90 days of pregnancy. Piau females reached puberty and sexual maturity at the same age as commercial line females, but with lower weight; moreover, Piau group showed negative correlations of birth weight with puberty (-0.27) and sexual maturity (-0.29). Commercial gilts presented higher ovulation rate, weight and length of uterus, and length and thoracic circumference of fetuses. Nevertheless, number of fetuses was similar in all groups at 90 days of gestation suggesting that Piau females present higher survival rates of the conceptuses. The results showed differences between the genetic groups related to fetal and placental development, gestational losses, number of ovulations and uterine development. In addition, an intermediate status of fetal weight was observed in Piau/Commercial line crossbred conceptuses; thus, the selection of Piau females on reproductive traits to be mated with commercial line males would be an alternative to

Protein Engineering: Case Studies of Commercialized Engineered Products

Science.gov (United States)

Walsh, Gary

2007-01-01

Programs in biochemistry invariably encompass the principles of protein engineering. Students often display increased understanding and enthusiasm when theoretical concepts are underpinned by practical example. Herein are presented five case studies, each focusing upon a commercial protein product engineered to enhance its application-relevant…

Graphic Communications--Commercial Photography. Ohio's Competency Analysis Profile.

Science.gov (United States)

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for graphic communications--commercial photography. Each unit (with or without subunits) contains competencies and competency builders that identify the…

Extended-length fiber optic carbon dioxide monitoring

Science.gov (United States)

Delgado-Alonso, Jesus; Lieberman, Robert A.

2013-05-01

This paper discusses the design and performance of fiber optic distributed intrinsic sensors for dissolved carbon dioxide, based on the use optical fibers fabricated so that their entire lengths are chemically sensitive. These fibers use a polymer-clad, silica-core structure where the cladding undergoes a large, reversible, change in optical absorbance in the presence of CO2. The local "cladding loss" induced by this change is thus a direct indication of the carbon dioxide concentration in any section of the fiber. To create these fibers, have developed a carbon dioxide-permeable polymer material that adheres well to glass, is physically robust, has a refractive index lower than fused silica, and acts as excellent hosts for a unique colorimetric indicator system that respond to CO2. We have used this proprietary material to produce carbon-dioxide sensitive fibers up to 50 meters long, using commercial optical fiber fabrication techniques. The sensors have shown a measurement range of dissolved CO2 of 0 to 1,450 mg/l (0 to 100% CO2 saturation), limit of detection of 0.3 mg/l and precision of 1.0 mg/l in the 0 to 50 mg/l dissolved CO2 range, when a 5 meter-long sensor fiber segment is used. Maximum fiber length, minimum detectable concentration, and spatial resolution can be adjusted by adjusting indicator concentration and fiber design.

Dynamic partnership: A new approach to EM technology commercialization and deployment

International Nuclear Information System (INIS)

Daly, D.J.; Erickson, T.A.; Groenewold, G.H.

1996-01-01

The cleanup of nuclear defense complex sites under the U.S. Department of Energy (DOE) Environmental Management (EM) Program presents an unprecedented challenge to the environmental sector. Effective and efficient cleanup of EM sites requires the timely development or modification of cleanup technologies. Facilitating the development of technologies to meet DOE goals for site cleanup is the responsibility of EM-50, the EM Program Office of Science and Technology. However, efforts are often arrested at the open-quotes valley of death,close quotes the general term for barriers to demonstration, commercialization, and deployment. The Energy ampersand Environmental Research Center (EERC), a not-for-profit, contract-supported organization focused on research, development, demonstration, and commercialization (RDD ampersand C) of energy and environmental technologies, is in the second year of a Cooperative Agreement with DOE's Morgantown Energy Technology Center (METC) designed to deliver EM technologies into the commercial marketplace through a unique combination of technical support, real-world demonstration, and brokering. This paper profiles this novel approach, termed open-quotes Dynamic Partnership,close quotes and reviews the application of this concept to the ongoing commercialization and deployment of four innovative cleanup technologies

Solution-mediated cladding doping of commercial polymer optical fibers

Science.gov (United States)

Stajanca, Pavol; Topolniak, Ievgeniia; Pötschke, Samuel; Krebber, Katerina

2018-03-01

Solution doping of commercial polymethyl methacrylate (PMMA) polymer optical fibers (POFs) is presented as a novel approach for preparation of custom cladding-doped POFs (CD-POFs). The presented method is based on a solution-mediated diffusion of dopant molecules into the fiber cladding upon soaking of POFs in a methanol-dopant solution. The method was tested on three different commercial POFs using Rhodamine B as a fluorescent dopant. The dynamics of the diffusion process was studied in order to optimize the doping procedure in terms of selection of the most suitable POF, doping time and conditions. Using the optimized procedure, longer segment of fluorescent CD-POF was prepared and its performance was characterized. Fiber's potential for sensing and illumination applications was demonstrated and discussed. The proposed method represents a simple and cheap way for fabrication of custom, short to medium length CD-POFs with various dopants.

Telomere length analysis.

Science.gov (United States)

Canela, Andrés; Klatt, Peter; Blasco, María A

2007-01-01

Most somatic cells of long-lived species undergo telomere shortening throughout life. Critically short telomeres trigger loss of cell viability in tissues, which has been related to alteration of tissue function and loss of regenerative capabilities in aging and aging-related diseases. Hence, telomere length is an important biomarker for aging and can be used in the prognosis of aging diseases. These facts highlight the importance of developing methods for telomere length determination that can be employed to evaluate telomere length during the human aging process. Telomere length quantification methods have improved greatly in accuracy and sensitivity since the development of the conventional telomeric Southern blot. Here, we describe the different methodologies recently developed for telomere length quantification, as well as their potential applications for human aging studies.

A retrospective observational study of functional outcomes, length of stay, and discharge disposition after an inpatient stroke rehabilitation program in Saudi Arabia.

Science.gov (United States)

Bindawas, Saad M; Mawajdeh, Hussam; Vennu, Vishal; Alhaidary, Hisham

2016-08-01

Functional outcomes, length of stay (LOS), and discharge disposition have become frequent outcome measures among stroke patients after rehabilitation programs. To examine the trends of changes in functional outcomes, LOS, and discharge disposition in stroke patients discharged from an inpatient rehabilitation facility.All patients (n = 432) were admitted to a tertiary inpatient rehabilitation hospital in Riyadh, Saudi Arabia with stroke diagnoses from November 2008 to December 2014. The functional independence measure (FIM) instrument used to assess the patient's functional status. The LOS was measured as the number of days the patients spent in the hospital from the day of admission to the day of discharge. The FIM efficiency was used to measure the patient's rehabilitation progress. All of the variables of the prospectively collected data were retrospectively analyzed.There were significant changes by years in the total FIM ranging from 23 to 29 (P stroke have improved after an inpatient stroke rehabilitation program between 2008 and 2014 even with a constant LOS. Discharge disposition has remained unstable over this period. To improve the efficiency of the stroke rehabilitation program in Saudi Arabia, there is a need to decrease the LOS and emphasize a comprehensive interdisciplinary approach.

Three near term commercial markets in space and their potential role in space exploration

Science.gov (United States)

Gavert, Raymond B.

2001-02-01

Independent market studies related to Low Earth Orbit (LEO) commercialization have identified three near term markets that have return-on-investment potential. These markets are: (1) Entertainment (2) Education (3) Advertising/sponsorship. Commercial activity is presently underway focusing on these areas. A private company is working with the Russians on a commercial module attached to the ISS that will involve entertainment and probably the other two activities as well. A separate corporation has been established to commercialize the Russian Mir Space Station with entertainment and promotional advertising as important revenue sources. A new startup company has signed an agreement with NASA for commercial media activity on the International Space Station (ISS). Profit making education programs are being developed by a private firm to allow students to play the role of an astronaut and work closely with space scientists and astronauts. It is expected that the success of these efforts on the ISS program will extend to exploration missions beyond LEO. The objective of this paper is to extrapolate some of the LEO commercialization experiences to see what might be expected in space exploration missions to Mars, the Moon and beyond. .

Commercial Research and Development: Power to Explore, Opportunities from Discovery

Science.gov (United States)

Casas, Joseph C.; Nall, Mark; Powers, C. Blake; Henderson, Robin N. (Technical Monitor)

2002-01-01

The technical and economic goals of commercial use of space are laudable, and are addressed as a high priority by almost every national space program and most major aerospace companies the world over. Yet, the focus of most organizational agendas and discussions tends to focus on one or two very narrow enabling aspects of this potentially large technological and economic opportunity. While government sponsored commercial launch activities and private space platforms are an integral part of efforts to leverage the commercial use of space, these activities are possibly one of the smallest parts of creating, a viable and sustainable market for the commercial use of space. Most of the current programs usually do not appropriately address some of the critical issues of the current, already interested, potential space user communities. Current programs place the focus of the majority of the user requirements on the vehicle payload weight and mass performance considerations as the primary payload economical factor in providing a commercial market with a stimulating price for gaining access to the space environment. The larger user challenges of transformation from Earth-based research and development approaches to space environment approaches are not addressed early enough in programs to impact the new business considerations of potential users. Currently, space-based research and development user activities require a large user investment in time, in development of new areas of support expertise, in development of new systems, in risk of schedule to completion, and in long term capital positioning. The larger opportunities for stimulating a strong market driven interest in commercial use of space that could result from the development of vehicle payload "leap ahead technologies" for users are being missed, and there is a real risk of limiting the potentially broader market base to support a more technologically advanced and economically lucrative outcome. A major driving

Impact of Emissions from Commercial Shipping During TexAQS 2006

Science.gov (United States)

Williams, E.; Lerner, B.; Murphy, P.

2007-12-01

Commercial marine vessels range in size from small fishing boats (20-30 meters in length) to extremely large container ships (over 300 meters in length). These ships almost without exception use diesel engines for propulsion and auxiliary power generation. The larger ships, comprising bulk carriers, tankers and container carriers, utilize diesel engines that produce power in the 10 MW to 100 MW range. These engines typically consume heavy fuel oils which are high in sulfur content (1%-4.5% by weight). These engines are also extremely efficient, converting essentially all of the carbon in the fuel to CO2, but also emitting NOx, CO, SO2, VOCs, and PM. During TexAQS 2006 our measurements on board the NOAA research ship Ronald H. Brown allowed us to characterize the emissions from a large number of commercial marine vessels. The measurements provided the means to calculate mass-based emission factors for many of the compounds noted above. With the information broadcast by these vessels over the Automated Information System, we have unequivocally determined the emission factors for over 200 vessels both at dock and underway. Our data largely confirm published average emission factors, but also show significant variability especially with NOx. This talk will present those results and then use the data to show that emissions of NOx and SO2 from these vessels are not negligible in the Houston-Galveston region.

Selectivity of commercial, larger mesh and square mesh trawl codends for deep water rose shrimp Parapenaeus longirostris (Lucas, 1846 in the Aegean Sea

Directory of Open Access Journals (Sweden)

Hakan Kaykaç

2009-09-01

Full Text Available We investigated the differences between size selectivity of a commercial codend (40 mm diamond mesh – 40D, a larger mesh codend (48 mm diamond mesh – 48D, and a square mesh codend (40 mm square mesh – 40S for Parapenaeus longirostris in international waters of the Aegean Sea. Selectivity data were collected by using a covered codend method and analysed taking between-haul variation into account. The results indicate significant increases in L50 values in relation to an increase in mesh size and when the square mesh is used in the commercial trawl codend. The results demonstrate that the commercially used codend (40D is not selective enough for P. longirostris in terms of length at first maturity. Changing from a 40D to a 48D codend significantly improves selection, with an increase of about 15% in the L50 values (carapace length 14.5 mm for 40D and 16.6 mm for 48D. Similarly, 40 mm square mesh, which has recently been legislated for EU Mediterranean waters, showed a 12.4% higher mean L50 value (16.3 mm than 40 mm diamond mesh for this species. However, despite these improvements, the 48D and 40S codends still need further improvements to obtain higher selectivity closer to the length at first maturity (20 mm carapace length.

Child trafficking and commercial sexual exploitation: a review of promising prevention policies and programs.

Science.gov (United States)

Rafferty, Yvonne

2013-10-01

Child trafficking, including commercial sexual exploitation (CSE), is one of the fastest growing and most lucrative criminal activities in the world. The global enslavement of children affects countless numbers of victims who are trafficked within their home countries or transported away from their homes and treated as commodities to be bought, sold, and resold for labor or sexual exploitation. All over the world, girls are particularly likely to be trafficked into the sex trade: Girls and women constitute 98% of those who are trafficked for CSE. Health and safety standards in exploitative settings are generally extremely low, and the degree of experienced violence has been linked with adverse physical, psychological, and social-emotional development. The human-rights-based approach to child trafficking provides a comprehensive conceptual framework whereby victim-focused and law enforcement responses can be developed, implemented, and evaluated. This article highlights promising policies and programs designed to prevent child trafficking and CSE by combating demand for sex with children, reducing supply, and strengthening communities. The literature reviewed includes academic publications as well as international and governmental and nongovernmental reports. Implications for social policy and future research are presented. © 2013 American Orthopsychiatric Association.

Assessing the Content and Quality of Commercially Available Reading Software Programs: Do They Have the Fundamental Structures to Promote the Development of Early Reading Skills in Children?

Science.gov (United States)

Grant, Amy; Wood, Eileen; Gottardo, Alexandra; Evans, Mary Ann; Phillips, Linda; Savage, Robert

2012-01-01

The current study developed a taxonomy of reading skills and compared this taxonomy with skills being trained in 30 commercially available software programs designed to teach emergent literacy or literacy-specific skills for children in preschool, kindergarten, and Grade 1. Outcomes suggest that, although some skills are being trained in a…

A Comparison of Two Commercial Volumetry Software Programs in the Analysis of Pulmonary Ground-Glass Nodules: Segmentation Capability and Measurement Accuracy

Science.gov (United States)

Kim, Hyungjin; Lee, Sang Min; Lee, Hyun-Ju; Goo, Jin Mo

2013-01-01

Objective To compare the segmentation capability of the 2 currently available commercial volumetry software programs with specific segmentation algorithms for pulmonary ground-glass nodules (GGNs) and to assess their measurement accuracy. Materials and Methods In this study, 55 patients with 66 GGNs underwent unenhanced low-dose CT. GGN segmentation was performed by using 2 volumetry software programs (LungCARE, Siemens Healthcare; LungVCAR, GE Healthcare). Successful nodule segmentation was assessed visually and morphologic features of GGNs were evaluated to determine factors affecting segmentation by both types of software. In addition, the measurement accuracy of the software programs was investigated by using an anthropomorphic chest phantom containing simulated GGNs. Results The successful nodule segmentation rate was significantly higher in LungCARE (90.9%) than in LungVCAR (72.7%) (p = 0.012). Vascular attachment was a negatively influencing morphologic feature of nodule segmentation for both software programs. As for measurement accuracy, mean relative volume measurement errors in nodules ≥ 10 mm were 14.89% with LungCARE and 19.96% with LungVCAR. The mean relative attenuation measurement errors in nodules ≥ 10 mm were 3.03% with LungCARE and 5.12% with LungVCAR. Conclusion LungCARE shows significantly higher segmentation success rates than LungVCAR. Measurement accuracy of volume and attenuation of GGNs is acceptable in GGNs ≥ 10 mm by both software programs. PMID:23901328

A comparison of two commercial volumetry software programs in the analysis of pulmonary ground-glass nodules: Segmentation capability and measurement accuracy

International Nuclear Information System (INIS)

Kim, Hyung Jin; Park, Chang Min; Lee, Sang Min; Lee, Hyun Joo; Goo, Jin Mo

2013-01-01

To compare the segmentation capability of the 2 currently available commercial volumetry software programs with specific segmentation algorithms for pulmonary ground-glass nodules (GGNs) and to assess their measurement accuracy. In this study, 55 patients with 66 GGNs underwent unenhanced low-dose CT. GGN segmentation was performed by using 2 volumetry software programs (LungCARE, Siemens Healthcare; LungVCAR, GE Healthcare). Successful nodule segmentation was assessed visually and morphologic features of GGNs were evaluated to determine factors affecting segmentation by both types of software. In addition, the measurement accuracy of the software programs was investigated by using an anthropomorphic chest phantom containing simulated GGNs. The successful nodule segmentation rate was significantly higher in LungCARE (90.9%) than in LungVCAR (72.7%) (p = 0.012). Vascular attachment was a negatively influencing morphologic feature of nodule segmentation for both software programs. As for measurement accuracy, mean relative volume measurement errors in nodules ≥ 10 mm were 14.89% with LungCARE and 19.96% with LungVCAR. The mean relative attenuation measurement errors in nodules ≥ 10 mm were 3.03% with LungCARE and 5.12% with LungVCAR. LungCARE shows significantly higher segmentation success rates than LungVCAR. Measurement accuracy of volume and attenuation of GGNs is acceptable in GGNs ≥ 10 mm by both software programs.

A comparison of two commercial volumetry software programs in the analysis of pulmonary ground-glass nodules: Segmentation capability and measurement accuracy

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyung Jin; Park, Chang Min; Lee, Sang Min; Lee, Hyun Joo; Goo, Jin Mo [Dept. of Radiology, Seoul National University College of Medicine, and Institute of Radiation Medicine, Seoul National University Medical Research Center, Seoul (Korea, Republic of)

2013-08-15

To compare the segmentation capability of the 2 currently available commercial volumetry software programs with specific segmentation algorithms for pulmonary ground-glass nodules (GGNs) and to assess their measurement accuracy. In this study, 55 patients with 66 GGNs underwent unenhanced low-dose CT. GGN segmentation was performed by using 2 volumetry software programs (LungCARE, Siemens Healthcare; LungVCAR, GE Healthcare). Successful nodule segmentation was assessed visually and morphologic features of GGNs were evaluated to determine factors affecting segmentation by both types of software. In addition, the measurement accuracy of the software programs was investigated by using an anthropomorphic chest phantom containing simulated GGNs. The successful nodule segmentation rate was significantly higher in LungCARE (90.9%) than in LungVCAR (72.7%) (p = 0.012). Vascular attachment was a negatively influencing morphologic feature of nodule segmentation for both software programs. As for measurement accuracy, mean relative volume measurement errors in nodules ≥ 10 mm were 14.89% with LungCARE and 19.96% with LungVCAR. The mean relative attenuation measurement errors in nodules ≥ 10 mm were 3.03% with LungCARE and 5.12% with LungVCAR. LungCARE shows significantly higher segmentation success rates than LungVCAR. Measurement accuracy of volume and attenuation of GGNs is acceptable in GGNs ≥ 10 mm by both software programs.

[Myopia: frequency of lattice degeneration and axial length].

Science.gov (United States)

Martín Sánchez, M D; Roldán Pallarés, M

2001-05-01

To evaluate the relationship between lattice retinal degeneration and axial length of the eye in different grades of myopia. A sample of 200 eyes from 124 myopic patients was collected by chance. The average age was 34.8 years (20-50 years) and the myopia was between 0.5 and 20 diopters (D). The eyes were grouped according to the degree of refraction defect, the mean axial length of each group (Scan A) and the frequency of lattice retinal degeneration and the relationship between these variables was studied. The possible influence of age on our results was also considered. For the statistical analysis, the SAS 6.07 program with the variance analysis for quantitative variables, and chi(2) test for qualitative variables with a 5% significance were used. A multivariable linear regression model was also adjusted. The highest frequency of lattice retinal degeneration occurred in those myopia patients having more than 15 D, and also in the group of myopia patients between 3 and 6 D, but this did not show statistical significance when compared with the other myopic groups. If the axial length is assessed, a greater frequency of lattice retinal degeneration is also found when the axial length is 25-27 mm and 29-30 mm, which correspond, respectively, to myopias between 3-10 D and more than 15 D. When the multivariable linear regression model was adjusted, the axial length showed the existence of lattice retinal degeneration (beta 0.41 mm; p=0.08) adjusted by the number of diopters (beta 0.38 mm; plattice retinal degeneration was found for myopias with axial eye length between 29-30 mm (more than 15 D), and 25-27 mm (between 3-10 D).

Building the Commercial Education Professional Competency Profile

Directory of Open Access Journals (Sweden)

Isabel Araya-Muñoz

2012-12-01

Full Text Available This paper provides a complete description of the Commercial Education Professional Competency Profile that resulted from the curricular diagnosis of the Licenciatura en Educación Comercial , at the Universidad Nacional, Costa Rica.  The methodological strategy used relies on the principles of research on education. Upon expert validation, written questionnaires were applied to first-year students, students of the licenciatura, practicing professionals and employers. The objective was to describe a particular education situation. Data was analyzed according to two categories: intentions/principles and scope/development. The findings resulted in the characteristics of the Commercial Education professionals, i.e. characteristics related to the discipline, characteristics related to the administrative management of teaching, specific and general characteristics of education and pedagogy, and characteristics associated to human development. Based on those criteria, on the curricular requirements of the information sources and on the curricular perspectives of the Academic Unit, ideas were put into practice to build the competency profile. The ideas proposed comprise the curricular fundamentals of the educational project on which the profile is set out, which include the subject of the study program, the global competency or training goal, the generic competencies as cross-cutting approaches, as well as the –pedagogical and disciplinary− specific competencies. The specific competencies of the discipline are focused on four competency areas: document production, organizational support, technological resources and information management. (1 Translator’s Note: One-year post-Bachelor study program in Commercial Education.

Pizza Hut, Domino's, and the Public Schools: Making Sense of Commercialization.

Science.gov (United States)

Stark, Andrew

2001-01-01

Describes different types of partnerships between schools and businesses, discussing the benefits of and drawbacks to the commercial aspects of programs like Pizza Hut's, in which children who read a certain number of books receive free pizza, and programs like Dominos', in which schools receive materials or money in return for students buying…

Space Station Workshop: Commercial Missions and User Requirements

Science.gov (United States)

1988-01-01

The topics of discussion addressed during a three day workshop on commercial application in space are presented. Approximately half of the program was directed towards an overview and orientation to the Space Station Project; the technical attributes of space; and present and future potential commercial opportunities. The remaining time was spent addressing technological issues presented by previously-formed industry working groups, who attempted to identify the technology needs, problems or issues faced and/or anticipated by the following industries: extraction (mining, agriculture, petroleum, fishing, etc.); fabrication (manufacturing, automotive, aircraft, chemical, pharmaceutical and electronics); and services (communications, transportation and retail robotics). After the industry groups presented their technology issues, the workshop divided into smaller discussion groups composed of: space experts from NASA; academia; industry experts in the appropriate disciplines; and other workshop participants. The needs identified by the industry working groups, space station technical requirements, proposed commercial ventures and other issues related to space commercialization were discussed. The material summarized and reported are the consensus from the discussion groups.

The impact of length of stay on recovery measures in faith-based addiction treatment.

Science.gov (United States)

Lashley, Mary

2018-03-30

To determine the impact of length of stay among homeless men in faith-based residential addictions recovery on physical activity, depression, self-esteem, and nicotine dependence. A time series design was utilized to measure changes in the four quality measures at program entry and at 3, 6, and 9 months following admission. The sample consisted of 175 homeless residents enrolled in a faith-based residential recovery program. Paired t tests were used to determine the change in average instrument response from admission to each follow-up period. Analysis of variance (ANOVA) and Tukey posthoc tests were used to assess for differences in length of stay between demographic variables. Statistically significant improvements were noted in self-esteem and depressive symptomatology at 3 and 6 months following admission and in physical activity levels at 3 months following admission. Nicotine dependence scores declined at 3 and 6 months but were not statistically significant. Time spent in this faith-based spiritual recovery program had a significant impact on depression, self-esteem, and physical activity. Recommendations for future study include conducting research to analyze the relationship between distinct program elements and quality indicators and comparing faith-based programs to other similar programs and to publicly funded secular recovery programs. © 2018 Wiley Periodicals, Inc.

Commercial lumber

Science.gov (United States)

Kent A. McDonald; David E. Kretschmann

1999-01-01

In a broad sense, commercial lumber is any lumber that is bought or sold in the normal channels of commerce. Commercial lumber may be found in a variety of forms, species, and types, and in various commercial establishments, both wholesale and retail. Most commercial lumber is graded by standardized rules that make purchasing more or less uniform throughout the country...

19 CFR 113.67 - Commercial gauger and commercial laboratory bond conditions.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Commercial gauger and commercial laboratory bond... SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BONDS Customs Bond Conditions § 113.67 Commercial gauger and commercial laboratory bond conditions. Commercial Gauger Bond Conditions (a) Commercial gauger bond...

Influences of the shielding cylinder on the length of radio-frequency cold atmospheric plasma jets

Science.gov (United States)

Li, He-Ping; Li, Jing; Zhang, Xiao-Fei; Guo, Heng; Chen, Jian; Department of Engineering Physics Team

2017-10-01

Cold atmospheric plasma jets driven by a radio frequency power supply contain abundant species and complex chemical reactions, which have wide applications in the fields of materials processing and modifications, food engineering, bio-medical science, etc. Our previous experiments have shown that the total length of a radio-frequency cold atmospheric plasma (RF-CAP) jet can exceed 1 meter with the shielding of a quartz tube. However, the shielding mechanisms of the solid cylinder has not been studied systematically. In this study, a two-dimensional, quasi-steady fluid model is used to investigate the influences of the shielding tube on the length of the RF-CAP jets under different conditions. The simulation results show that the total jet length grows monotonously; while simultaneously, the jet length out of the tube shows a non-monotonic variation trend, with the increase of the tube length, which is in good agreement with the experimental observations. The shielding mechanisms of the solid cylinder on the RF-CAP jet is also discussed in detail based on the modeling results. This work was supported by the National Natural Science Foundation of China (11475103, 21627812), the National Key Research and Development Program of China (2016YFD0102106) and Tsinghua University Initiative Scientific Program (20161080108).

10 CFR 431.106 - Uniform test method for the measurement of energy efficiency of commercial water heaters and hot...

Science.gov (United States)

2010-01-01

... efficiency of commercial water heaters and hot water supply boilers (other than commercial heat pump water... PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Water Heaters, Hot Water Supply Boilers and Unfired Hot Water Storage Tanks Test Procedures § 431.106 Uniform test method for the measurement...

Commercial waste and spent fuel packaging program. Annual report

International Nuclear Information System (INIS)

Hakl, A.R.

1981-10-01

This document is a report of activities performed by Westinghouse Advanced Energy Systems Division - Nevada Operations in meeting subtask objectives described in the Nevada Nuclear Waste Storage Investigations (NNWSI) Project Plan and revised planning documentation for Fiscal Year (FY) 1981. Major activities included: completion of the first fuel exchange in the Spent Fuel Test - Climax program; plasma arc welder development; modification and qualification of a canister cutter; installation, and activation of a remote area monitor, constant air monitor and an alpha/beta/gamma counting system; qualification of grapples required to handle pressurized water reactor or boiling water reactor fuel and high level waste (HLW) logs; data acquisition from the 3 kilowatt soil temperature test, 2 kw fuel temperature test, and 2 kw drywell test; calorimetry of the fuel assembly used in the fuel temperature test; evaluation of moisture accumulation in the drywells and recommendations for proposed changes; revision of safety assessment document to include HLW log operations; preparation of quality assurance plan and procedures; development and qualification of all equipment and procedures to receive, handle and encapsulate both the HLW log and spent fuel for the basalt waste isolation program/near surface test facility program; preliminary studies of both the requirements to perform waste packaging for the test and evaluation facility and a cask storage program for the DOE Interim Spent Fuel Management program; and remote handling operations on radioactive source calibration in support of other contractors

Enabling Sustainable Exploration through the Commercial Development of Space

Science.gov (United States)

Nall, Mark; Casas, Joseph

2003-01-01

The commercial development of space offers enabling benefits to space exploration. This paper examines how those benefits can be realized, and how the Space Product Development Office of the National Aeronautics and Space Administration is taking the first steps towards opening the space frontier through vital and sustainable industrial development. The Space Product Development Office manages 15 Commercial Space Centers that partner with US industry to develop opportunities for commerce in space. This partnership directly benefits NASA exploration in four primary ways. First, by actively involving traditional and non-traditional companies in commercial space activities, it seeks and encourages to the maximum extent possible the fullest commercial use of space, as directed by NASA's charter. Second, the commercial research and technologies pursued and developed in the program often have direct applicability to NASA priority mission areas. This dual use strategy for research and technology has the potential to greatly expand what the NASA scientific community can do. Third, the commercial experiment hardware developed by the Commercial Space Centers and their industrial partners is available for use by NASA researchers in support of priority NASA research. By utilizing low cost and existing commercial hardware, essential NASA research can be more readily accomplished. Fourth, by assisting industry in understanding the use of the environment of space and in helping industry enhance the tools and technologies for NASA and commercial space systems, the market for commercial space utilization and the capability for meeting the future growing market needs is being developed. These two activities taken together form the beginning of a new space economy that will enable sustainable NASA exploration of the universe.

Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Appliances

Energy Technology Data Exchange (ETDEWEB)

Zogg, Robert [Navigant Consulting, Inc., Burlington, MA (United States); Goetzler, William [Navigant Consulting, Inc., Burlington, MA (United States); Ahlfeldt, Christopher [Navigant Consulting, Inc., Burlington, MA (United States); Hiraiwa, Hirokazu [Navigant Consulting, Inc., Burlington, MA (United States); Sathe, Amul [Navigant Consulting, Inc., Burlington, MA (United States); Sutherland, Timothy [Navigant Consulting, Inc., Burlington, MA (United States)

2009-12-01

This study characterizes and assesses the appliances used in commercial buildings. The primary objectives of this study were to document the energy consumed by commercial appliances and identify research, development and demonstration (RD&D) opportunities for efficiency improvements, excluding product categories such as HVAC, building lighting, refrigeration equipment, and distributed generation systems. The study included equipment descriptions, characteristics of the equipment’s market, national energy consumption, estimates of technical potential for energy-saving technologies, and recommendations for U.S. Department of Energy programs that can promote energy savings in commercial appliances.

Commercial-vehicle enforcement: a guide for law-enforcement managers

International Nuclear Information System (INIS)

1987-01-01

The purpose of the document is to provide a resource for law enforcement agencies to evaluate their programs, and to promote the uniform application of concepts already shown to be effective in other jurisdictions, which identify and address commercial-vehicle traffic safety needs

Length-weight and length-length relationships of common carp (Cyprinus carpio L.) in the middle and southern Iraq provinces

Science.gov (United States)

Al-jebory, Taymaa A.; Das, Simon K.; Usup, Gires; Bakar, Y.; Al-saadi, Ali H.

2018-04-01

In this study, length-weight and length-length relationships of common carp (Cyprinus carpio L.) in the middle and southern Iraq provinces were determined. Fish specimens were procured from seven provinces from July to December, 2015. A negative and positive allometric growth pattern was obtained, where the total length (TL) ranged from 25.60 cm to 33.53 cm, and body weight (BW) ranged from 700 g to 1423 g. Meanwhile, the lowest of 1.03 and highest of 3.54 in "b" value was recorded in group F and group C, respectively. Therefore, Fulton condition factor (K) range from 2.57 to 4.94. While, relative condition factor (Kn) was in the ranged of 0.95 to 1.01. A linear relationship between total length (TL) and standard length (SL) among the provinces for fish groups was obtained. The variances in "b" value ranged from 0.10 to 0.93 with correlation coefficient (r2) of 0.02 to 0.97. This research could be used as a guide to study the ecology and biology of common Carp (Cyprinus carpio L.) in the middle and southern Iraq provinces.

Defense Finance and Accounting Service Commercial Activities Program

National Research Council Canada - National Science Library

1999-01-01

.... This report evaluated the Defense Finance and Accounting Service competitive sourcing process and reviewed the adequacy of the Defense Finance and Accounting Service management control program...

Does Receiving a Blood Transfusion Predict for Length of Stay in Children Undergoing Cranial Vault Remodeling for Craniosynostosis? Outcomes Using the Pediatric National Surgical Quality Improvement Program Dataset.

Science.gov (United States)

Markiewicz, Michael R; Alden, Tord; Momin, Mohmed Vasim; Olsson, Alexis B; Jurado, Ray J; Abdullah, Fizan; Miloro, Michael

2017-08-01

Recent interventions have aimed at reducing the need for blood transfusions in the perioperative period in patients with craniosynostosis undergoing cranial vault remodeling. However, little is known regarding whether the receipt of a blood transfusion influences the length of hospital stay. The purpose of this study was to assess whether the receipt of a blood transfusion in patients undergoing cranial vault remodeling is associated with an increased length of stay. To address the research purposes, we designed a retrospective cohort study using the 2014 Pediatric National Surgical Quality Improvement Program (NSQIP Peds) dataset. The primary predictor variable was whether patients received a blood transfusion during cranial vault remodeling. The primary outcome variable was length of hospital stay after the operation. The association between the receipt of blood transfusions and length of stay was assessed using the Student t test. The association between other covariates and the outcome variable was assessed using linear regression, analysis of variance, and the Tukey test for post hoc pair-wise comparisons. The sample was composed of 756 patients who underwent cranial vault remodeling: 503 who received blood transfusions and 253 who did not. The primary predictor variable of blood transfusion was associated with an increased length of stay (4.1 days vs 3.0 days, P = .03). Other covariates associated with an increased length of stay included race, American Society of Anesthesiologists status, premature birth, presence of a congenital malformation, and number of sutures involved in craniosynostosis. The receipt of a blood transfusion in the perioperative period in patients with craniosynostosis undergoing cranial vault remodeling was associated with an increased length of stay. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

An Imaging System for Automated Characteristic Length Measurement of Debrisat Fragments

Science.gov (United States)

Moraguez, Mathew; Patankar, Kunal; Fitz-Coy, Norman; Liou, J.-C.; Sorge, Marlon; Cowardin, Heather; Opiela, John; Krisko, Paula H.

2015-01-01

The debris fragments generated by DebriSat's hypervelocity impact test are currently being processed and characterized through an effort of NASA and USAF. The debris characteristics will be used to update satellite breakup models. In particular, the physical dimensions of the debris fragments must be measured to provide characteristic lengths for use in these models. Calipers and commercial 3D scanners were considered as measurement options, but an automated imaging system was ultimately developed to measure debris fragments. By automating the entire process, the measurement results are made repeatable and the human factor associated with calipers and 3D scanning is eliminated. Unlike using calipers to measure, the imaging system obtains non-contact measurements to avoid damaging delicate fragments. Furthermore, this fully automated measurement system minimizes fragment handling, which reduces the potential for fragment damage during the characterization process. In addition, the imaging system reduces the time required to determine the characteristic length of the debris fragment. In this way, the imaging system can measure the tens of thousands of DebriSat fragments at a rate of about six minutes per fragment, compared to hours per fragment in NASA's current 3D scanning measurement approach. The imaging system utilizes a space carving algorithm to generate a 3D point cloud of the article being measured and a custom developed algorithm then extracts the characteristic length from the point cloud. This paper describes the measurement process, results, challenges, and future work of the imaging system used for automated characteristic length measurement of DebriSat fragments.

Convolutional Encoder and Viterbi Decoder Using SOPC For Variable Constraint Length

DEFF Research Database (Denmark)

Kulkarni, Anuradha; Dnyaneshwar, Mantri; Prasad, Neeli R.

2013-01-01

Convolution encoder and Viterbi decoder are the basic and important blocks in any Code Division Multiple Accesses (CDMA). They are widely used in communication system due to their error correcting capability But the performance degrades with variable constraint length. In this context to have...... detailed analysis, this paper deals with the implementation of convolution encoder and Viterbi decoder using system on programming chip (SOPC). It uses variable constraint length of 7, 8 and 9 bits for 1/2 and 1/3 code rates. By analyzing the Viterbi algorithm it is seen that our algorithm has a better...

Fiber length and pulping characteristics of switchgrass, alfalfa stems, hybrid poplar and willow biomasses.

Science.gov (United States)

Ai, Jun; Tschirner, Ulrike

2010-01-01

Switchgrass (Panicum virgatum), alfalfa stems (Medicago sativa), second year growth hybrid poplar (Populus) and willow (Salix spp.) were examined to determine fiber characteristics, pulping behavior and paper properties. Alfalfa stems and switchgrass both showed length weighted average fiber length (LWW) of 0.78 mm, a very narrow fiber length distribution and high fines content. Willow and hybrid poplar have lower fines content but a very low average fiber length (0.42 and 0.48 mm LWW). In addition, the four biomass species showed distinctly different chemical compositions. Switchgrass was defibered successfully using Soda and Soda Anthraquinone (AQ) pulping and demonstrated good paper properties. Both fast-growing wood species pulped well using the Kraft process, and showed acceptable tensile strength, but low tear strength. Alfalfa stems reacted very poorly to Soda and Soda AQ pulping but responded well to Kraft and Kraft AQ. Pulps with tensile and tear strength considerably higher than those found for commercial aspen pulps were observed for alfalfa. All four biomass species examined demonstrated low pulp yield. The highest yields were obtained with poplar and switchgrass (around 43%). Considering the short fibers and low yields, all four biomass types will likely only be used in paper manufacturing if they offer considerable economic advantage over traditional pulp wood.

IMHEX{sup {reg_sign}} fuel cells progress toward commercialization

Energy Technology Data Exchange (ETDEWEB)

Scroppo, J.A.; Laurens, R.M.; Petraglia, V.J.

1995-12-31

The overall goal of M-C Power is the development and subsequent commercialization of Molten Carbonate Fuel Cell (MCFC) stacks. More specifically, MCFC`s Manifolded Heat Exchange (IMHEX{sup {reg_sign}}) plate design created by the Institute of Technology. In order to achieve the aforementioned goal, M-C Power assembled a formidable team of industry leaders. This group, refered to as the (IHMEX{sup {reg_sign}}) Team, has developed a strategy to move decisively through the stages of Technology Development and Product Design and Improvement through commercialization. This paper is to review the status of the overall commercialization program and activities. It will also provide an overview of the market entry product. Furthermore, we will evaluate the opportunities and benefits this product brings to a competitive power industry.

Commercial Nuclear Waste Research and Development Program. Annual report, fiscal year 1985

International Nuclear Information System (INIS)

1985-12-01

Nuclear waste handling, packaging, and dry storage testing for the Department of Energy (DOE) Commercial Nuclear Waste Research and Development Program are conducted at the E-MAD (Engine Maintenance, Assembly and Disassembly) facility in Area 25 of the Nevada Test Site. Brief discussions of E-MAD activities are included in this report. Significant accomplishments for this period are as follows: (1) Integrity monitoring of the 17 fuel assemblies located at E-MAD was performed to determine if handling, packaging, or storage had affected the overall integrity of the fuel. (2) The 24-month Dry Storage Fuel Integrity Demonstration Test being conducted at the E-MAD facility was completed. Two fuel rods, removed from the assembly prior to the test, were reinserted into the fuel assembly. (3) The remaining nine fuel assemblies were removed from their seal-welded canisters and characterized to verify their integrity following storage tests. (4) The decay heat rates of five fuel assemblies were measured using the E-MAD boiling water calorimeter. The measured decay heat rates were compared to predicted rates. (5) At DOE/NV request, plans were prepared and submitted to ship the 17 E-MAD fuel assemblies to the Idaho National Engineering Laboratory and then shut down the E-MAD facility. (6) The revised safety assessment document was approved and transmitted to DOE/NV. (7) Quality Assurance personnel assisted in the completion of the DOE/NV Quality Assurance Manual and it was approved and published. (8) Technical support was provided to Lawrence Livermore National Laboratories in the decontamination of electronic equipment

75 FR 66686 - Defense Federal Acquisition Regulation Supplement; Balance of Payments Program Exemption for...

Science.gov (United States)

2010-10-29

... Federal Acquisition Regulation Supplement; Balance of Payments Program Exemption for Commercial... Balance of Payments Program for construction material that is commercial information technology. DATES... the Balance of Payments Program for commercial information technology to be used in overseas...

FIRE BEHAVIOR PREDICTING MODELS EFFICIENCY IN BRAZILIAN COMMERCIAL EUCALYPT PLANTATIONS

Directory of Open Access Journals (Sweden)

Benjamin Leonardo Alves White

2016-12-01

Full Text Available Knowing how a wildfire will behave is extremely important in order to assist in fire suppression and prevention operations. Since the 1940’s mathematical models to estimate how the fire will behave have been developed worldwide, however, none of them, until now, had their efficiency tested in Brazilian commercial eucalypt plantations nor in other vegetation types in the country. This study aims to verify the accuracy of the Rothermel (1972 fire spread model, the Byram (1959 flame length model, and the fire spread and length equations derived from the McArthur (1962 control burn meters. To meet these objectives, 105 experimental laboratory fires were done and their results compared with the predicted values from the models tested. The Rothermel and Byram models predicted better than McArthur’s, nevertheless, all of them underestimated the fire behavior aspects evaluated and were statistically different from the experimental data.

Gas-cooled reactor commercialization study: introduction scenario and commercialization analyses for process heat applications. Final report, July 8, 1977--November 30, 1977

International Nuclear Information System (INIS)

1977-12-01

This report identifies and presents an introduction scenario which can lead to the operation of High Temperature Gas Cooled Reactor demonstration plants for combined process heat and electric power generation applications, and presents a commercialization analysis relevant to the organizational and management plans which could implement a development program

Gas-cooled reactor commercialization study: introduction scenario and commercialization analyses for process heat applications. Final report, July 8, 1977--November 30, 1977

Energy Technology Data Exchange (ETDEWEB)

1977-12-01

This report identifies and presents an introduction scenario which can lead to the operation of High Temperature Gas Cooled Reactor demonstration plants for combined process heat and electric power generation applications, and presents a commercialization analysis relevant to the organizational and management plans which could implement a development program.

Confirmatory research program: effects of atmospheric contaminants on commercial charcoals

International Nuclear Information System (INIS)

Bellamy, R.R.; Dietz, V.R.

1979-01-01

The increased use of activated charcoals in engineered-safety-feature and normal ventilation systems of nuclear power stations to continually remove radioiodine from flowing air prior to release to the environment has added importance to the question of the effect of atmospheric contaminants on the useful life of the charcoal. In January of 1977 the Naval Research Laboratory (NRL) began an investigation to determine the extent to which atmospheric contaminants in ambient concentrations degrade the efficiency of various commercially-available charcoals for removing methyl iodide. The approach employed by NRL is two-fold. First, charcoal samples are exposed to unmodified outdoor air for periods of one to nine months, then examined for methyl iodide retention, increase in weight, and the pH of water extract. The atmospheric contaminants are identified by the NRL Air Quality Monitoring Station, and concentrations of the various contaminants (ozone, SO 2 , NO 2 , CO 2 , methane and total hydrocarbons) are also available. Second, additional charcoal samples are exposed to the same pollutants under controlled laboratory conditions in various pollutant combinations. Results indicate that the water vapor-charcoal interaction is an important factor in the degradation of the commercial charcoals. Laboratory results indicate the pollutant sulfur dioxide plus water vapor can result in significant charcoal deterioration, as did ozone plus water vapor. Conversely, carbon monoxide did not appear to affect the charcoal. Also, differences were observed for various charcoals

Telomere Length and Mortality

DEFF Research Database (Denmark)

Kimura, Masayuki; Hjelmborg, Jacob V B; Gardner, Jeffrey P

2008-01-01

Leukocyte telomere length, representing the mean length of all telomeres in leukocytes, is ostensibly a bioindicator of human aging. The authors hypothesized that shorter telomeres might forecast imminent mortality in elderly people better than leukocyte telomere length. They performed mortality...

Superconductivity program for electric systems, Superconductivity Technology Center, Los Alamos National Laboratory, annual progress report for fiscal year 1997

Energy Technology Data Exchange (ETDEWEB)

Willis, J.O.; Newnam, B.E. [eds.; Peterson, D.E.

1999-03-01

Development of high-temperature superconductors (HTS) has undergone tremendous progress during the past year. Kilometer tape lengths and associated magnets based on BSCCO materials are now commercially available from several industrial partners. Superconducting properties in the exciting YBCO coated conductors continue to be improved over longer lengths. The Superconducting Partnership Initiative (SPI) projects to develop HTS fault current limiters and transmission cables have demonstrated that HTS prototype applications can be produced successfully with properties appropriate for commercial applications. Research and development activities at LANL related to the HTS program for Fiscal Year 1997 are collected in this report. LANL continues to support further development of Bi2223 and Bi2212 tapes in collaboration with American Superconductor Corporation (ASC) and Oxford Superconductivity Technology, Inc. (OSTI), respectively. The tape processing studies involving novel thermal treatments and microstructural characterization have assisted these companies in commercializing these materials. The research on second-generation YBCO-coated conductors produced by pulsed-laser deposition (PLD) over buffer template layers produced by ion beam-assisted deposition (IBAD) continues to lead the world. The applied physics studies of magnetic flux pinning by proton and heavy ion bombardment of BSCCO and YBCO tapes have provided many insights into improving the behavior of these materials in magnetic fields. Sections 4 to 7 of this report contain a list of 29 referred publications and 15 conference abstracts, a list of patent and license activities, and a comprehensive list of collaborative agreements in progress and completed.

Commercial grade item (CGI) dedication of MDR relays for nuclear safety related applications

Science.gov (United States)

Das, Ranjit K.; Julka, Anil; Modi, Govind

1994-08-01

MDR relays manufactured by Potter & Brumfield (P&B) have been used in various safety related applications in commercial nuclear power plants. These include emergency safety features (ESF) actuation systems, emergency core cooling systems (ECCS) actuation, and reactor protection systems. The MDR relays manufactured prior to May 1990 showed signs of generic failure due to corrosion and outgassing of coil varnish. P&B has made design changes to correct these problems in relays manufactured after May 1990. However, P&B does not manufacture the relays under any 10CFR50 Appendix B quality assurance (QA) program. They manufacture the relays under their commercial QA program and supply these as commercial grade items. This necessitates CGI Dedication of these relays for use in nuclear-safety-related applications. This paper presents a CGI dedication program that has been used to dedicate the MDR relays manufactured after been used to dedicate the MDR relays manufactured after May 1990. The program is in compliance with current Nuclear Regulatory Commission (NRC) and Electric Power Research Institute (EPRI) guidelines and applicable industry standards; it specifies the critical characteristics of the relays, provides the tests and analysis required to verify the critical characteristics, the acceptance criteria for the test results, performs source verification to quality P&B for its control of the critical characteristics, and provides documentation. The program provides reasonable assurance that the new MDR relays will perform their intended safety functions.

The U.S. commercial air tour industry: a review of aviation safety concerns.

Science.gov (United States)

Ballard, Sarah-Blythe

2014-02-01

The U.S. Title 14 Code of Federal Regulations defines commercial air tours as "flight[s] conducted for compensation or hire in an airplane or helicopter where a purpose of the flight is sightseeing." The incidence of air tour crashes in the United States is disproportionately high relative to similar commercial aviation operations, and air tours operating under Part 91 governance crash significantly more than those governed by Part 135. This paper reviews the government and industry response to four specific areas of air tour safety concern: surveillance of flight operations, pilot factors, regulatory standardization, and maintenance quality assurance. It concludes that the government and industry have successfully addressed many of these tenet issues, most notably by: advancing the operations surveillance infrastructure through implementation of en route, ground-based, and technological surveillance methods; developing Aeronautical Decision Making and cue-based training programs for air tour pilots; consolidating federal air tour regulations under Part 136; and developing public-private partnerships for raising maintenance operating standards and improving quality assurance programs. However, opportunities remain to improve air tour safety by: increasing the number and efficiency of flight surveillance programs; addressing pilot fatigue with more restrictive flight hour limitations for air tour pilots; ensuring widespread uptake of maintenance quality assurance programs, especially among high-risk operators not currently affiliated with private air tour safety programs; and eliminating the 25-mile exception allowing Part 91 operators to conduct commercial air tours without the safety oversight required of Part 135 operators.

Space Commercialization

Science.gov (United States)

Martin, Gary L.

2011-01-01

A robust and competitive commercial space sector is vital to continued progress in space. The United States is committed to encouraging and facilitating the growth of a U.S. commercial space sector that supports U.S. needs, is globally competitive, and advances U.S. leadership in the generation of new markets and innovation-driven entrepreneurship. Energize competitive domestic industries to participate in global markets and advance the development of: satellite manufacturing; satellite-based services; space launch; terrestrial applications; and increased entrepreneurship. Purchase and use commercial space capabilities and services to the maximum practical extent Actively explore the use of inventive, nontraditional arrangements for acquiring commercial space goods and services to meet United States Government requirements, including measures such as public-private partnerships, . Refrain from conducting United States Government space activities that preclude, discourage, or compete with U.S. commercial space activities. Pursue potential opportunities for transferring routine, operational space functions to the commercial space sector where beneficial and cost-effective.

Why commercial customers are SIC of DSM [demand-side management] marketing

International Nuclear Information System (INIS)

Lewis, L.E.

1990-01-01

Studies have shown that the success of demand management programs, which have demonstrated economic benefits, depends on the level of customer participation. In order to have a better understanding of the decisionmaking process of commercial customers with respect to demand management programs, a study was undertaken to determine the preferences and the behavior of this class of clientele. This clientele, whose power consumption has been increasing at a faster rate than that of other sectors, represents a vast range of enterprises producing and supplying all kinds of products. Many of them operate from numerous geographic points on local, regional, national, and even world scales and are generally hierarchically organized. Because of these characteristics, their decisionmaking processes and their needs are equally complex, more so than in the residential sector. A multidimensional approach has been adopted to ensure that their needs are determined according to a quantitative and qualitative research method. The conclusions of the quantitative research have demonstrated that the frameworks representing different organizations respond differently to questions on their needs. It is also noted that certain commercial enterprises are of a cohesive nature (i.e. there is a consistency in understanding of corporate strategic and operational requirements at all hierarchical levels), while others are more diffuse. Those responsible for marketing demand management programs therefore must improve their understanding of the strategic and operational needs of their commercial customers in order to make their demand management programs productive in the view of the appropriate personnel at the hierarchical level applicable to the company concerned

Building Technologies Program Multi-Year Program Plan Technology Validation and Market Introduction 2008

Energy Technology Data Exchange (ETDEWEB)

None, None

2008-01-01

Building Technologies Program Multi-Year Program Plan 2008 for technology validation and market introduction, including ENERGY STAR, building energy codes, technology transfer application centers, commercial lighting initiative, EnergySmart Schools, EnergySmar

Electropolishing effect on roughness metrics of ground stainless steel: a length scale study

Science.gov (United States)

Nakar, Doron; Harel, David; Hirsch, Baruch

2018-03-01

Electropolishing is a widely-used electrochemical surface finishing process for metals. The electropolishing of stainless steel has vast commercial application, such as improving corrosion resistance, improving cleanness, and brightening. The surface topography characterization is performed using several techniques with different lateral resolutions and length scales, from atomic force microscopy in the nano-scale (filter are adopted. While the commonly used roughness amplitude parameters (Ra, Rq and Rz) fail to characterize electropolished textures, the root mean square slope (RΔq) is found to better describe the electropolished surfaces and to be insensitive to scale.

22 CFR 226.82 - Program income.

Science.gov (United States)

2010-04-01

... Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Additional Provisions For Awards to Commercial Organizations § 226.82 Program income. The... commercial organization. ...

47 CFR 76.971 - Commercial leased access terms and conditions.

Science.gov (United States)

2010-10-01

... operators that have not satisfied their statutory leased access requirements shall accommodate part-time..., educational and governmental access programming, provided that the operator's franchise agreement requires it... leased commercial channels. Cable operators may impose reasonable insurance requirements on leased access...

The Alaska Commercial Fisheries Water Quality Sampling Methods and Procedures Manual

Energy Technology Data Exchange (ETDEWEB)

Folley, G.; Pearson, L.; Crosby, C. [Alaska Dept. of Environmental Conservation, Soldotna, AK (United States); DeCola, E.; Robertson, T. [Nuka Research and Planning Group, Seldovia, AK (United States)

2006-07-01

A comprehensive water quality sampling program was conducted in response to the oil spill that occurred when the M/V Selendang Ayu ship ran aground near a major fishing port at Unalaska Island, Alaska in December 2004. In particular, the sampling program focused on the threat of spilled oil to the local commercial fisheries resources. Spill scientists were unable to confidently model the movement of oil away from the wreck because of limited oceanographic data. In order to determine which fish species were at risk of oil contamination, a real-time assessment of how and where the oil was moving was needed, because the wreck became a continual source of oil release for several weeks after the initial grounding. The newly developed methods and procedures used to detect whole oil during the sampling program will be presented in the Alaska Commercial Fisheries Water Quality Sampling Methods and Procedures Manual which is currently under development. The purpose of the manual is to provide instructions to spill managers while they try to determine where spilled oil has or has not been encountered. The manual will include a meaningful data set that can be analyzed in real time to assess oil movement and concentration. Sections on oil properties and processes will be included along with scientific water quality sampling methods for whole and dissolved phase oil to assess potential contamination of commercial fishery resources and gear in Alaska waters during an oil spill. The manual will present a general discussion of factors that should be considered when designing a sampling program after a spill. In order to implement Alaska's improved seafood safety measures, the spatial scope of spilled oil must be known. A water quality sampling program can provide state and federal fishery managers and food safety inspectors with important information as they identify at-risk fisheries. 11 refs., 7 figs.

Status of the M-C Power IMHEX{reg_sign} MCFC commercialization program

Energy Technology Data Exchange (ETDEWEB)

Laurens, R.M.; Scroppo, J.A.; Petri, R.J.; Benjamin, T.G. [M-C Power Corp., Burr Ridge, IL (United States)

1996-12-31

Six years ago, M-C Power (MCP) developed a comprehensive business plan to commercialize molten carbonate fuel cell (MCFC) power plants. On an annual basis the plan has been reviewed and modified to adapt to identified end user needs and technological advancements. As a result, product definition kept abreast with marketing requirements. Over the last five years, there was order and reason for subtle shifts in supply, demand, competition and pricing policies. Today, however, traditional market assessment assumptions must be challenged. There is a revolution taking place. The revolution can be summed up in one word ... deregulation. Deregulation of the airline industry led to consideration of the natural gas industry. Now that natural gas deregulation is behind us, it is electric power and telecommunications that are receiving attention. Increased emphasis is being placed on achieving market-priced power. The net result will be thinner margins for the seller and the end user. What does this mean for the commercialization of molten carbonate fuel cells?

A leaf sequencing algorithm to enlarge treatment field length in IMRT

International Nuclear Information System (INIS)

Xia Ping; Hwang, Andrew B.; Verhey, Lynn J.

2002-01-01

With MLC-based IMRT, the maximum usable field size is often smaller than the maximum field size for conventional treatments. This is due to the constraints of the overtravel distances of MLC leaves and/or jaws. Using a new leaf sequencing algorithm, the usable IMRT field length (perpendicular to the MLC motion) can be mostly made equal to the full length of the MLC field without violating the upper jaw overtravel limit. For any given intensity pattern, a criterion was proposed to assess whether an intensity pattern can be delivered without violation of the jaw position constraints. If the criterion is met, the new algorithm will consider the jaw position constraints during the segmentation for the step and shoot delivery method. The strategy employed by the algorithm is to connect the intensity elements outside the jaw overtravel limits with those inside the jaw overtravel limits. Several methods were used to establish these connections during segmentation by modifying a previously published algorithm (areal algorithm), including changing the intensity level, alternating the leaf-sequencing direction, or limiting the segment field size. The algorithm was tested with 1000 random intensity patterns with dimensions of 21x27 cm2, 800 intensity patterns with higher intensity outside the jaw overtravel limit, and three different types of clinical treatment plans that were undeliverable using a segmentation method from a commercial treatment planning system. The new algorithm achieved a success rate of 100% with these test patterns. For the 1000 random patterns, the new algorithm yields a similar average number of segments of 36.9±2.9 in comparison to 36.6±1.3 when using the areal algorithm. For the 800 patterns with higher intensities outside the jaw overtravel limits, the new algorithm results in an increase of 25% in the average number of segments compared to the areal algorithm. However, the areal algorithm fails to create deliverable segments for 90% of these

Potential commercial applications of centrifuge technology

International Nuclear Information System (INIS)

1985-08-01

As part of an effort to prevent the loss of and maximize the use of unique developments of the centrifuge program, this document identifies and briefly describes unclassified technologies potentially available for transfer. In addition, this document presents a preliminary plan for action needed to carry out the transfer activity. Continuing efforts will provide additional descriptions of technologies which have applications that are not as apparent or as obvious as those presented here. Declassification of some of the program information, now classified as restricted data, would permit the descriptions of additional technologies which have significant commercial potential. The following are major areas of technology where transfer opportunities exist: biomedical; separation; motors and control systems; materials; vacuum; dynamics and balancing; and diagnostics and instrumentation

Optimization of inhibitory decision rules relative to length and coverage

KAUST Repository

Alsolami, Fawaz

2012-01-01

The paper is devoted to the study of algorithms for optimization of inhibitory rules relative to the length and coverage. In contrast with usual rules that have on the right-hand side a relation "attribute ≠ value", inhibitory rules have a relation "attribute = value" on the right-hand side. The considered algorithms are based on extensions of dynamic programming. © 2012 Springer-Verlag.

City of Phoenix - Energize Phoenix Program

Energy Technology Data Exchange (ETDEWEB)

Laloudakis, Dimitrios J.

2014-09-29

Energize Phoenix (EPHX) was designed as an ambitious, large-scale, three-year pilot program to provide energy efficiency upgrades in buildings, along Phoenix’s new Light Rail Corridor – part of a federal effort to reduce energy consumption and stimulate job growth, while simultaneously reducing the country’s carbon footprint and promoting a shift towards a green economy. The program was created through a 2010 competitive grant awarded to the City of Phoenix who managed the program in partnership with Arizona State University (ASU), the state’s largest university, and Arizona Public Service (APS), the state’s largest electricity provider. The U.S. Department of Energy (DOE) Better Buildings Neighborhood Program (BBNP) and the American Recovery and Reinvestment Act (ARRA) of 2009 provided $25M in funding for the EPHX program. The Light Rail Corridor runs through the heart of downtown Phoenix, making most high-rise and smaller commercial buildings eligible to participate in the EPHX program, along with a diverse mix of single and multi-family residential buildings. To ensure maximum impact and deeper market penetration, Energize Phoenix was subdivided into three unique parts: i. commercial rebate program, ii. commercial financing program, and iii. residential program Each component was managed by the City of Phoenix in partnership with APS. Phoenix was fortunate to partner with APS, which already operated robust commercial and residential rebate programs within its service territory. Phoenix tapped into the existing utility contractor network, provided specific training to over 100 contracting firms, and leveraged the APS rebate program structure (energy efficiency funding) to launch the EPHX commercial and residential rebate programs. The commercial finance program was coordinated and managed through a contract with National Bank of Arizona, NBAZ, which also provided project capital leveraging EPHX finance funds. Working in unison, approved contractors

Does length or neighborhood size cause the word length effect?

Science.gov (United States)

Jalbert, Annie; Neath, Ian; Surprenant, Aimée M

2011-10-01

Jalbert, Neath, Bireta, and Surprenant (2011) suggested that past demonstrations of the word length effect, the finding that words with fewer syllables are recalled better than words with more syllables, included a confound: The short words had more orthographic neighbors than the long words. The experiments reported here test two predictions that would follow if neighborhood size is a more important factor than word length. In Experiment 1, we found that concurrent articulation removed the effect of neighborhood size, just as it removes the effect of word length. Experiment 2 demonstrated that this pattern is also found with nonwords. For Experiment 3, we factorially manipulated length and neighborhood size, and found only effects of the latter. These results are problematic for any theory of memory that includes decay offset by rehearsal, but they are consistent with accounts that include a redintegrative stage that is susceptible to disruption by noise. The results also confirm the importance of lexical and linguistic factors on memory tasks thought to tap short-term memory.

Correlated evolution of sternal keel length and ilium length in birds

Directory of Open Access Journals (Sweden)

Tao Zhao

2017-07-01

Full Text Available The interplay between the pectoral module (the pectoral girdle and limbs and the pelvic module (the pelvic girdle and limbs plays a key role in shaping avian evolution, but prior empirical studies on trait covariation between the two modules are limited. Here we empirically test whether (size-corrected sternal keel length and ilium length are correlated during avian evolution using phylogenetic comparative methods. Our analyses on extant birds and Mesozoic birds both recover a significantly positive correlation. The results provide new evidence regarding the integration between the pelvic and pectoral modules. The correlated evolution of sternal keel length and ilium length may serve as a mechanism to cope with the effect on performance caused by a tradeoff in muscle mass between the pectoral and pelvic modules, via changing moment arms of muscles that function in flight and in terrestrial locomotion.

Federal Wind Energy Program. Program summary. [USA

Energy Technology Data Exchange (ETDEWEB)

None

1978-01-01

The objective of the Federal Wind Energy Program is to accelerate the development of reliable and economically viable wind energy systems and enable the earliest possible commercialization of wind power. To achieve this objective for small and large wind systems requires advancing the technology, developing a sound industrial technology base, and addressing the non-technological issues which could deter the use of wind energy. This summary report outlines the projects being supported by the program through FY 1977 toward the achievement of these goals. It also outlines the program's general organization and specific program elements.

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2013

Energy Technology Data Exchange (ETDEWEB)

none,

2014-04-30

This FY 2013 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2014

Energy Technology Data Exchange (ETDEWEB)

None, None

2015-02-01

This FY 2014 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

The European project CASAM for the protection of commercial airliners in flight

Science.gov (United States)

Vergnolle, Jean-François

2007-10-01

As part of mass transportation systems, commercial aircraft are a potential target for terrorists because they represent one of the best achievements of our society. As a result, an attack would have a large psychological impact on people and economic activity. Several European Commission-funded Research and Technology programs, such as SAFEE and PALMA, are dedicated to technologies and systems that will be implemented onboard aircraft in the near future to increase the security of commercial flights. One of these programs, CASAM, is focusing on a potential solution to reduce aircraft vulnerability against Man Portable Air Defense Systems (MANPADS) during takeoff, ascent and landing. A specific onboard jamming system will be developed, meeting stringent yet competitive requirements that deal with high reliability, low cost and minimal installation constraints. The overall objective of the CASAM Project1 is to design and validate a closed-loop, laser-based DIRCM (Directed IR Countermeasure) module for jamming fired missiles. It will comply with commercial air transportation constraints, including the normal air traffic control rules. For example, the following aspects will be considered: - Environmental friendliness for ground objects and inhabitants close to airports, aircraft safety (maintenance, handling and usage) and high efficiency against the recognized threats; - Upgradability for further and future disseminated threats - Adherence to commercial operation budgets and processes

Fundamental length

International Nuclear Information System (INIS)

Pradhan, T.

1975-01-01

The concept of fundamental length was first put forward by Heisenberg from purely dimensional reasons. From a study of the observed masses of the elementary particles known at that time, it is sumrised that this length should be of the order of magnitude 1 approximately 10 -13 cm. It was Heisenberg's belief that introduction of such a fundamental length would eliminate the divergence difficulties from relativistic quantum field theory by cutting off the high energy regions of the 'proper fields'. Since the divergence difficulties arise primarily due to infinite number of degrees of freedom, one simple remedy would be the introduction of a principle that limits these degrees of freedom by removing the effectiveness of the waves with a frequency exceeding a certain limit without destroying the relativistic invariance of the theory. The principle can be stated as follows: It is in principle impossible to invent an experiment of any kind that will permit a distintion between the positions of two particles at rest, the distance between which is below a certain limit. A more elegant way of introducing fundamental length into quantum theory is through commutation relations between two position operators. In quantum field theory such as quantum electrodynamics, it can be introduced through the commutation relation between two interpolating photon fields (vector potentials). (K.B.)

77 FR 30919 - Commercial Driver's License Testing and Commercial Learner's Permit Standards

Science.gov (United States)

2012-05-24

..., and 385 [Docket No. FMCSA-2007-27659] Commercial Driver's License Testing and Commercial Learner's... published a final rule titled ``Commercial Driver's License Testing and Commercial Learner's Permit... additional drivers, primarily those transporting certain tanks temporarily attached to the commercial motor...

GLOBALIZATION’S ASPECTS OF HIGHER EDUCATION COMMERCIALIZATION

Directory of Open Access Journals (Sweden)

O. Zhylinska

2013-05-01

Full Text Available The article is devoted to higher education current trends in the context of commercialization under globalization. The paper analyzes dynamics of the global education market, identifies factors that influence the choice of university and educational programs abroad. The importance of world universities rankings as information products that reflect the quality of education is shown. The study characterizes Ukrainian realities of globalization’s activation in higher education.

A study on the establishment of safety assessment guidelines of commercial grade item dedication in digitalized safety systems

International Nuclear Information System (INIS)

Hwang, H. S.; Kim, B. R.; Oh, S. H.

1999-01-01

Because of obsolescing the components used in safety related systems of nuclear power plants, decreasing the number of suppliers qualified for the nuclear QA program and increasing maintenance costs of them, utilities have been considering to use commercial grade digital computers as an alternative for resolving such issues. However, commercial digital computers use the embedded pre-existing software, including operating system software, which are not developed by using nuclear grade QA program. Thus, it is necessary for utilities to establish processes for dedicating digital commercial grade items. A regulatory body also needs guidance to evaluate the digital commercial products properly. This paper surveyed the regulations and their regulatory guides, which establish the requirements for commercial grade items dedication, industry standards and guidances applicable to safety related systems. This paper provides some guidelines to be applied in evaluating the safety of digital upgrades and new digital plant protection systems in Korea

Two pricing methods for solving an integrated commercial fishery ...

African Journals Online (AJOL)

In this paper, we develop two novel pricing methods for solving an integer program. We demonstrate the methods by solving an integrated commercial fishery planning model (IFPM). In this problem, a fishery manager must schedule fishing trawlers (determine when and where the trawlers should go fishing, and when the ...

Accreditation status of U.S. military graduate medical education programs.

Science.gov (United States)

De Lorenzo, Robert A

2008-07-01

Military graduate medical education (GME) comprises a substantial fraction of U.S. physician training capacity. The wars in Iraq and Afghanistan have placed substantial stress on military medicine, and lay and professional press accounts have raised awareness of the effects on military GME. To date, however, objective data on military GME quality remains sparse. Determine the accreditation status of U.S. military GME programs. Additionally, military GME program data will be compared to national (U.S.) accreditation lengths. Retrospective review of Accreditation Council for Graduate Medical Education (ACGME) data. All military-sponsored core programs in specialties with at least three residencies were included. Military-affiliated but civilian-sponsored programs were excluded. The current and past cycle data were used for the study. For each specialty, the current mean accreditation length and the net change in cycle was calculated. National mean accreditation lengths by specialty for 2005 to 2006 were obtained from the ACGME. Comparison between the overall mean national and military accreditation lengths was performed with a z test. All other comparisons employed descriptive statistics. Ninety-nine military programs in 15 specialties were included in the analysis. During the study period, 1 program was newly accredited, and 6 programs had accreditation withdrawn or were closed. The mean accreditation length of the military programs was 4.0 years. The overall national mean for the same specialties is 3.5 years (p < 0.01). In previous cycles, 68% of programs had accreditation of 4 years or longer, compared to 70% in the current cycle, while 13% had accreditation of 2 years or less in the previous cycle compared to 14% in the current cycle. Ten (68%) of the military specialties had mean accreditation lengths greater than the national average, while 5 (33%) were below it. Ten (68%) specialties had stable or improving cycle lengths when compared to previous cycles

Environmental development plan. LWR commercial waste management

International Nuclear Information System (INIS)

1980-08-01

This Environmental Development Plan (EDP) identifies the planning and managerial requirements and schedules needed to evaluate and assess the environmental, health and safety (EH and S) aspects of the Commercial Waste Management Program (CWM). Environment is defined in its broadest sense to include environmental, health (occupational and public), safety, socioeconomic, legal and institutional aspects. This plan addresses certain present and potential Federal responsibilities for the storage, treatment, transfer and disposal of radioactive waste materials produced by the nuclear power industry. The handling and disposal of LWR spent fuel and processed high-level waste (in the event reprocessing occurs) are included in this plan. Defense waste management activities, which are addressed in detail in a separate EDP, are considered only to the extent that such activities are common to the commercial waste management program. This EDP addresses three principal elements associated with the disposal of radioactive waste materials from the commercial nuclear power industry, namely Terminal Isolation Research and Development, Spent Fuel Storage and Waste Treatment Technology. The major specific concerns and requirements addressed are assurance that (1) radioactivity will be contained during waste transport, interim storage or while the waste is considered as retrievable from a repository facility, (2) the interim storage facilities will adequately isolate the radioactive material from the biosphere, (3) the terminal isolation facility will isolate the wastes from the biosphere over a time period allowing the radioactivity to decay to innocuous levels, (4) the terminal isolation mode for the waste will abbreviate the need for surveillance and institutional control by future generations, and (5) the public will accept the basic waste management strategy and geographical sites when needed

Does self-regulation of advertisement length improve consumer welfare?

OpenAIRE

Matsubae, Taisuke; Matsushima, Noriaki

2012-01-01

In Japan, TV platforms regulate themselves as to the length of the advertisements they air. Using modified Hotelling models, we investigate whether such self-regulation improves consumer and social welfare or not. When all consumers choose a single TV program (the utility functions of consumers satisfy the standard 'full-coverage' condition), self-regulation always reduces consumer welfare. It improves social welfare only if the advertisement revenue of each platform is not small and the cost...

Varying rotation lengths in northern production forests: Implications for habitats provided by retention and production trees.

Science.gov (United States)

Felton, Adam; Sonesson, Johan; Nilsson, Urban; Lämås, Tomas; Lundmark, Tomas; Nordin, Annika; Ranius, Thomas; Roberge, Jean-Michel

2017-04-01

Because of the limited spatial extent and comprehensiveness of protected areas, an increasing emphasis is being placed on conserving habitats which promote biodiversity within production forest. For this reason, alternative silvicultural programs need to be evaluated with respect to their implications for forest biodiversity, especially if these programs are likely to be adopted. Here we simulated the effect of varied rotation length and associated thinning regimes on habitat availability in Scots pine and Norway spruce production forests, with high and low productivity. Shorter rotation lengths reduced the contribution made by production trees (trees grown for industrial use) to the availability of key habitat features, while concurrently increasing the contribution from retention trees. The contribution of production trees to habitat features was larger for high productivity sites, than for low productivity sites. We conclude that shortened rotation lengths result in losses of the availability of habitat features that are key for biodiversity conservation and that increased retention practices may only partially compensate for this. Ensuring that conservation efforts better reflect the inherent variation in stand rotation lengths would help improve the maintenance of key forest habitats in production forests.

Commercial objectives, technology transfer, and systems analysis for fusion power development

Science.gov (United States)

Dean, Stephen O.

1988-09-01

Fusion is an inexhaustible source of energy that has the potential for economic commercial applications with excellent safety and environmental characteristics. The primary focus for the fusion energy development program is the generation of central station electricity. Fusion has the potential, however, for many other applications. The fact that a large fraction of the energy released in a DT fusion reaction is carried by high energy neutrons suggests potentially unique applications. In addition, fusion R and D will lead to new products and new markets. Each fusion application must meet certain standards of economic and safety and environmental attractiveness. For this reason, economics on the one hand, and safety and environment and licensing on the other, are the two primary criteria for setting long range commercial fusion objectives. A major function of systems analysis is to evaluate the potential of fusion against these objectives and to help guide the fusion R and D program toward practical applications. The transfer of fusion technology and skills from the national labs and universities to industry is the key to achieving the long range objective of commercial fusion applications.

Results of the Medicare Health Support disease-management pilot program.

Science.gov (United States)

McCall, Nancy; Cromwell, Jerry

2011-11-03

In the Medicare Modernization Act of 2003, Congress required the Centers for Medicare and Medicaid Services to test the commercial disease-management model in the Medicare fee-for-service program. The Medicare Health Support Pilot Program was a large, randomized study of eight commercial programs for disease management that used nurse-based call centers. We randomly assigned patients with heart failure, diabetes, or both to the intervention or to usual care (control) and compared them with the use of a difference-in-differences method to evaluate the effects of the commercial programs on the quality of clinical care, acute care utilization, and Medicare expenditures for Medicare fee-for-service beneficiaries. The study included 242,417 patients (163,107 in the intervention group and 79,310 in the control group). The eight commercial disease-management programs did not reduce hospital admissions or emergency room visits, as compared with usual care. We observed only 14 significant improvements in process-of-care measures out of 40 comparisons. These modest improvements came at substantial cost to the Medicare program in fees paid to the disease-management companies ($400 million), with no demonstrable savings in Medicare expenditures. In this large study, commercial disease-management programs using nurse-based call centers achieved only modest improvements in quality-of-care measures, with no demonstrable reduction in the utilization of acute care or the costs of care.

Precision machining commercialization

International Nuclear Information System (INIS)

1978-01-01

To accelerate precision machining development so as to realize more of the potential savings within the next few years of known Department of Defense (DOD) part procurement, the Air Force Materials Laboratory (AFML) is sponsoring the Precision Machining Commercialization Project (PMC). PMC is part of the Tri-Service Precision Machine Tool Program of the DOD Manufacturing Technology Five-Year Plan. The technical resources supporting PMC are provided under sponsorship of the Department of Energy (DOE). The goal of PMC is to minimize precision machining development time and cost risk for interested vendors. PMC will do this by making available the high precision machining technology as developed in two DOE contractor facilities, the Lawrence Livermore Laboratory of the University of California and the Union Carbide Corporation, Nuclear Division, Y-12 Plant, at Oak Ridge, Tennessee

78 FR 64295 - Energy Conservation Program: Test Procedure for Commercial Refrigeration Equipment

Science.gov (United States)

2013-10-28

... they are consumer products or commercial and industrial equipment. Under 42 U.S.C. 6314(c)(1), no later... requirements a consumer would expect. DOE requests comment on the proposed definition for chef base or griddle... projection is normal to the plane of the door, and the way customers typically view products through the door...

Spinoff 2002: Fortieth Anniversary Technology Utilization Program

Science.gov (United States)

2002-01-01

Since its inception 40 years ago, NASA's Technology Transfer Program has led the way for our nation to benefit from cutting-edge aerospace technologies. In addition to contributing to U.S. economic growth, these technologies are improving the quality of life on Earth while finding new ways to protect and preserve it. NASA's research and development efforts have advanced areas in medicine, communications, manufacturing, computer technology, and homeland security. These breakthroughs, translated into commercial products, are enhancing the lives of Americans everywhere. When a congressional mandate led NASA to develop the Scientific and Technical Information (STI) Program, the Agency began a wide dissemination of its research and development results. In doing so, NASA recognized that many of its technologies were transferable to industry for the development of commercial products. As a result, the Technology Utilization Program was born in 1962. The successful program went through several changes over the years, as its philosophy, mission, and goals adapted into the Technology Transfer Program we know today. The program strives to make the latest technologies available to industry as soon as they are developed. Each year, NASA's Spinoff publication showcases new products and services resulting from commercial partnerships between NASA and private industry. In the 2002 issue, the NASA field centers reflect upon the growth that has made these innovations available to the public. The Research and Development section examines past achievements, current successes, and future goals for each of the ten NASA centers. The Commercial Benefits section proudly highlights 51 new spinoff products, including a heart pump for patients needing a heart transplant, as well as an air purifier that destroys anthrax spores. The Technology Transfer and Outreach section describes the outreach achievements and educational successes made possible through the NASA Commercial Technology Network

FILLETING YIELD, BODY CHARACTERISTICS AND LENGTH WEIGHT RELATIONSHIP OF FOUR FISH SPECIES FROM LOWER RIVER BENUE MAKURDI NIGERIA

OpenAIRE

Ikape, Simon Ihie; Solomon, Shola Gabriel

2018-01-01

Fillet yield, length-weight relationship and condition factor of four commercial fishspecies including: Protopterusannectens, Labeo coubie,Auchenoglanis occidentalis and Mormyrus rume from lowerriver Benue Makurdi Nigeria were determined. Atotal of 600 fish samples were used, 50 individuals regarding each species forthe period of three months. Fish samples were collected and transported to theUniversity of Agriculture Makurdi, Department of Fisheries and Aquaculturelaboratory where data were ...

ERAST: Scientific Applications and Technology Commercialization

Science.gov (United States)

Hunley, John D. (Compiler); Kellogg, Yvonne (Compiler)

2000-01-01

This is a conference publication for an event designed to inform potential contractors and appropriate personnel in various scientific disciplines that the ERAST (Environmental Research Aircraft and Sensor Technology) vehicles have reached a certain level of maturity and are available to perform a variety of missions ranging from data gathering to telecommunications. There are multiple applications of the technology and a great many potential commercial and governmental markets. As high altitude platforms, the ERAST vehicles can gather data at higher resolution than satellites and can do so continuously, whereas satellites pass over a particular area only once each orbit. Formal addresses are given by Rich Christiansen, (Director of Programs, NASA Aerospace Technology Ent.), Larry Roeder, (Senior Policy Advisor, U.S. Dept. of State), and Dr. Marianne McCarthy, (DFRC Education Dept.). The Commercialization Workshop is chaired by Dale Tietz (President, New Vista International) and the Science Workshop is chaired by Steve Wegener, (Deputy Manager of NASA ERAST, NASA Ames Research Center.

Conductors for commercial MRI magnets beyond NbTi: requirements and challenges

Science.gov (United States)

Parizh, Michael; Lvovsky, Yuri; Sumption, Michael

2017-01-01

Magnetic resonance imaging (MRI), a powerful medical diagnostic tool, is the largest commercial application of superconductivity. The superconducting magnet is the largest and most expensive component of an MRI system. The magnet configuration is determined by competing requirements including optimized functional performance, patient comfort, ease of siting in a hospital environment, minimum acquisition and lifecycle cost including service. In this paper, we analyze conductor requirements for commercial MRI magnets beyond traditional NbTi conductors, while avoiding links to a particular magnet configuration or design decisions. Potential conductor candidates include MgB2, ReBCO and BSCCO options. The analysis shows that no MRI-ready non-NbTi conductor is commercially available at the moment. For some conductors, MRI specifications will be difficult to achieve in principle. For others, cost is a key barrier. In some cases, the prospects for developing an MRI-ready conductor are more favorable, but significant developments are still needed. The key needs include the development of, or significant improvements in: (a) conductors specifically designed for MRI applications, with form-fit-and-function readily integratable into the present MRI magnet technology with minimum modifications. Preferably, similar conductors should be available from multiple vendors; (b) conductors with improved quench characteristics, i.e. the ability to carry significant current without damage while in the resistive state; (c) insulation which is compatible with manufacturing and refrigeration technologies; (d) dramatic increases in production and long-length quality control, including large-volume conductor manufacturing technology. In-situ MgB2 is, perhaps, the closest to meeting commercial and technical requirements to become suitable for commercial MRI. Conductor technology is an important, but not the only, issue in introduction of HTS/MgB2 conductor into commercial MRI magnets. These

Land remote sensing commercialization: A status report

Science.gov (United States)

Bishop, W. P.; Heacock, E. L.

1984-01-01

The current offer by the United States Department of Commerce to transfer the U.S. land remote sensing program to the private sector is described. A Request for Proposals (RFP) was issued, soliciting offers from U.S. firms to provide a commercial land remote sensing satellite system. Proposals must address a complete system including satellite, communications, and ground data processing systems. Offerors are encouraged to propose to take over the Government LANDSAT system which consists of LANDSAT 4 and LANDSAT D'. Also required in proposals are the market development procedures and plans to ensure that commercialization is feasible and the business will become self-supporting at the earliest possible time. As a matter of Federal Policy, the solicitation is designed to protect both national security and foreign policy considerations. In keeping with these concerns, an offeror must be a U.S. Firm. Requirements for data quality, quantity, distribution and delivery are met by current operational procedures. It is the Government's desire that the Offeror be prepared to develop and operate follow-on systems without Government subsidies. However, to facilitate rapid commercialization, an offeror may elect to include in his proposal mechanisms for short term government financial assistance.

Interfacing ANSYS to user's programs using UNIX shell program

Energy Technology Data Exchange (ETDEWEB)

Kim, In Yong; Kim, Beom Shig [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1994-01-01

It has been considered to be impossible to interface the ANSYS, which is the commercial finite element code and whose program is not open to public, to the other user's program. When the analysis need to be iterated, the user should wait until the analysis is finished and read the ANSYS result to make the input data for every iteration. In this report the direct interfacing techniques between the ANSYS and the other program using UNIX shell programming are proposed. The detail program lists and the application example are also provided. (Author) 19 refs., 6 figs., 7 tabs.

Activities dedicated to FCPP commercialization at Toshiba

Energy Technology Data Exchange (ETDEWEB)

Ikeda, Shin-ichi; Ozono, Jiro; Sato, Nobuaki [Toshiba Corp., Tokyo (Japan)

1996-12-31

The present line-up of fuel cell power plants (FCPPs) at Toshiba consists of 11MW FCPP for pressurized operation, 1000kW on-site FCPP and 200kW on-site FCPP. In these, an 11MW FCPP installed at Goi Power Station of Tokyo Electric Power Company (TEPCO) is providing valuable experience through more than 20,000 cumulative hours of operation. Also, a 1000kW on-site FCPP, which Toshiba manufactured under the joint program of NEDO and PAFC Technology Research Association, has cumulative operation of 7,500 hours. Toshiba, however, believes that the 200kW on-site FCPP is the leader in the commercialization of phosphoric acid FCPP. This paper therefore presents the development status of 200kW power plants and our strategic considerations for full commercialization of PC25 type 200kW FCPP.

Monitoring sodium in commercially processed foods from stores and restaurants

Science.gov (United States)

Most of the sodium we eat comes from commercially processed foods from stores and restaurants. Sodium reduction in these foods is a key component of several recent public health efforts. Agricultural Research Service (ARS) of USDA, CDC and FDA have launched a collaborative program to monitor sodium ...

HOGEN{trademark} proton exchange membrane hydrogen generators: Commercialization of PEM electrolyzers

Energy Technology Data Exchange (ETDEWEB)

Smith, W.F.; Molter, T.M. [Proton Energy Systems, Inc., Rocky Hill, CT (United States)

1997-12-31

PROTON Energy Systems` new HOGEN series hydrogen generators are Proton Exchange Membrane (PEM) based water electrolyzers designed to generate 300 to 1000 Standard Cubic Feet Per Hour (SCFH) of high purity hydrogen at pressures up to 400 psi without the use of mechanical compressors. This paper will describe technology evolution leading to the HOGEN, identify system design performance parameters and describe the physical packaging and interfaces of HOGEN systems. PEM electrolyzers have served US and UK Navy and NASA needs for many years in a variety of diverse programs including oxygen generators for life support applications. In the late 1970`s these systems were advocated for bulk hydrogen generation through a series of DOE sponsored program activities. During the military buildup of the 1980`s commercial deployment of PEM hydrogen generators was de-emphasized as priority was given to new Navy and NASA PEM electrolysis systems. PROTON Energy Systems was founded in 1996 with the primary corporate mission of commercializing PEM hydrogen generators. These systems are specifically designed and priced to meet the needs of commercial markets and produced through manufacturing processes tailored to these applications. The HOGEN series generators are the first step along the path to full commercial deployment of PEM electrolyzer products for both industrial and consumer uses. The 300/1000 series are sized to meet the needs of the industrial gases market today and provide a design base that can transition to serve the needs of a decentralized hydrogen infrastructure tomorrow.

Commercial demonstration of the NOXSO SO{sub 2}/NO{sub x} removal flue gas cleanup system. Environmental information volume

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

The Clean Coal Technology (CCT) Demonstration Program is a $5 billion technology demonstration program that was legislated by Congress to be funded jointly by the federal government and industrial or other sector participants. The goal of the Program is to make available to the U.S. energy marketplace a number of advanced, more efficient, reliable, and environmentally responsive coal utilization and environmental control technologies. These technologies are intended to reduce or eliminate the economic and environmental impediments that limit the full consideration of coal as a future energy resource. Over the next decade, the Program will advance the technical, environmental and economic performance of these advanced technologies to the point where the private sector will be able to introduce them into the commercial marketplace. Each of these demonstrations is in a scale large enough to generate sufficient design, construction and operation data for the private sector to judge the technology`s commercial potential and to make informed confident decisions on its commercial readiness. The strategy being implemented to achieve the goal of the CCT Demonstration Program is to conduct a multi-phase effort consisting of at least five separate solicitations for projects, each with individual objectives that, when integrated, will make technology options available on a schedule consistent with the demands of the energy market and responsive to the relevant environmental considerations. This paper describes a commercial demonstration project to be fielded in support of this program.

Changes in root lengths of maxillary incisors during orthodontic retention period

Directory of Open Access Journals (Sweden)

Ravanmehr H

2006-01-01

Full Text Available Background and Aim: External apical root resorption is a common iatrogenic consequence of orthodontic treatment. Much controversy exists in the literature about changes in root lengths at post treatment periods. Although many practitioners believe that resorption becomes stable after active treatment, quantitative data are scarce. The purpose of this study was to determine quantitative changes in root lengths of maxillary incisors during fixed orthodontic post treatment period, and to assess if it is influenced by gender and factors related to active treatment. Materials and Methods: This was a case cross over study, performed on 80 patients (52 females and 28 males aged between 13 and 22 years. At debonding stage and beginning of retention phase of fixed orthodontic treatment, Hawley type retainer was fabricated for maxillary arch. Periapical radiographs of maxillary incisors using standard parallel technique were obtained immediately after debonding, and 3 and 7 months later. Crown and root lengths of maxillary incisors were measured using computer program. Changes in root lengths were calculated considering correction factors. Also associations between some factors and the change in root lengths during post treatment periods were assessed. These included gender, type of treatment plan (non extraction/extraction, technique (standard edgewise/straight-wire edgewise and duration of active treatment (less than 2 years/2 years and more. T-test and 4-way ANOVA were used for statistical analysis with P0.05 as the limit of significance. Results: No significant relation was found between apical root resorption of maxillary central incisors and time elapsed after treatment. Significant relation was observed between apical root resorption of maxillary lateral incisors and the length of post treatment period. No significant relation was found between root length changes of maxillary incisors during post treatment period and gender, type of treatment

The Space Shuttle and expendable launch systems - A U.S. commercial customer perspective

Science.gov (United States)

Savage, M.; Chagnon, R.

1985-10-01

The development of space transportation systems for commercial satellite launches is reviewed. A comparison of the Ariane system with the Space Shuttle is presented. The performance capability, reliability, and availability of the two systems are analyzed; the Ariane 4 is capable of launching payloads of 1900-4200 kg into transfer orbits and is better positioned than the Shuttle to handle commercial payloads greater than 1900 kg. The insurance costs, and spacecraft and launcher integration complexity for the two systems are discussed. The launch cost and postponement penalties are studied. NASA's launch cost is based on the length or mass of the payload multiplied by the fixed Shuttle cost, with Ariane attempting to keep prices $1-3 million lower, in order to be competitive with the Shuttle. NASA offers one free postponement and penalties as high as 55 percent; Ariane's penalties range from 6-18 percent of the launch price. The need for lower prices, an easier integration process, customer convience, and less severe postponement and reflight policies in order for the space transportation systems to be commercially useful, is discussed.

Procurement Engineering Process for Commercial Grade Item Dedication

International Nuclear Information System (INIS)

Park, Jong-Hyuck; Park, Jong-Eun; Kwak, Tack-Hun; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull

2006-01-01

Procurement Engineering Process for commercial grade item dedication plays an increasingly important role in operation management of Korea Nuclear Power Plants. The purpose of the Procurement Engineering Process is the provision and assurance of a high quality and quantity of spare, replacement, retrofit and new parts and equipment while maximizing plant availability, minimizing downtime due to parts unavailability and providing reasonable overall program and inventory cost. In this paper, we will review the overview requirements, responsibilities and the process for demonstrating with reasonable assurance that a procured item for potential nuclear safety related services or other essential plant service is adequate with reasonable assurance for its application. This paper does not cover the details of technical evaluation, selecting critical characteristics, selecting acceptance methods, performing failure modes and effects analysis, performing source surveillance, performing quality surveys, performing special tests and inspections, and the other aspects of effective Procurement Engineering and Commercial Grade Item Dedication. The main contribution of this paper is to provide the provision of an overview of Procurement Engineering Process for commercial grade item

Experimental investigation of span length for flexural test of fiber reinforced polymer composite laminates

Directory of Open Access Journals (Sweden)

Akhil Mehndiratta

2018-01-01

Full Text Available Testing and evaluation of mechanical properties for FRP (Fiber Reinforced Polymer composite parts play a significant role to qualify it for the end use. Among the mechanical properties, the flexural strength is significant and vital as it may vary with specimen depth, temperature and the test span length. The flexural strength varies for different materials with varying the test span length hence the current work aims to find an optimum span length to test flexural strength for the specimens made of Glass (7781, EC9756 and Carbon (HTA7, G801 prepreg materials. Experiments are conducted as per the ASTM Standard D 790 for flexural test by varying the span lengths to understand the behavior of the flexural strength and flexural modulus. The experimental data were compared with those obtained from the finite element program software Altair Hyper works 14.0. The results indicate that flexural modulus increases with the span length to a point and then it decreases. Thereby, an optimum span length can be obtained for testing flexural strength, which will be useful to the designers and the composite manufacturers to accomplish better standard testing procedures.

Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Page, Janie; Kiliccote, Sila; Dudley, Junqiao Han; Piette, Mary Ann; Chiu, Albert K.; Kellow, Bashar; Koch, Ed; Lipkin, Paul

2011-07-01

Small and medium commercial customers in California make up about 20-25% of electric peak load in California. With the roll out of smart meters to this customer group, which enable granular measurement of electricity consumption, the investor-owned utilities will offer dynamic prices as default tariffs by the end of 2011. Pacific Gas and Electric Company, which successfully deployed Automated Demand Response (AutoDR) Programs to its large commercial and industrial customers, started investigating the same infrastructures application to the small and medium commercial customers. This project aims to identify available technologies suitable for automating demand response for small-medium commercial buildings; to validate the extent to which that technology does what it claims to be able to do; and determine the extent to which customers find the technology useful for DR purpose. Ten sites, enabled by eight vendors, participated in at least four test AutoDR events per site in the summer of 2010. The results showed that while existing technology can reliably receive OpenADR signals and translate them into pre-programmed response strategies, it is likely that better levels of load sheds could be obtained than what is reported here if better understanding of the building systems were developed and the DR response strategies had been carefully designed and optimized for each site.

Commercial Buildings Characteristics, 1992

Energy Technology Data Exchange (ETDEWEB)

1994-04-29

Commercial Buildings Characteristics 1992 presents statistics about the number, type, and size of commercial buildings in the United States as well as their energy-related characteristics. These data are collected in the Commercial Buildings Energy Consumption Survey (CBECS), a national survey of buildings in the commercial sector. The 1992 CBECS is the fifth in a series conducted since 1979 by the Energy Information Administration. Approximately 6,600 commercial buildings were surveyed, representing the characteristics and energy consumption of 4.8 million commercial buildings and 67.9 billion square feet of commercial floorspace nationwide. Overall, the amount of commercial floorspace in the United States increased an average of 2.4 percent annually between 1989 and 1992, while the number of commercial buildings increased an average of 2.0 percent annually.

Mapping and validation of major quantitative trait loci for kernel length in wild barley (Hordeum vulgare ssp. spontaneum).

Science.gov (United States)

Zhou, Hong; Liu, Shihang; Liu, Yujiao; Liu, Yaxi; You, Jing; Deng, Mei; Ma, Jian; Chen, Guangdeng; Wei, Yuming; Liu, Chunji; Zheng, Youliang

2016-09-13

Kernel length is an important target trait in barley (Hordeum vulgare L.) breeding programs. However, the number of known quantitative trait loci (QTLs) controlling kernel length is limited. In the present study, we aimed to identify major QTLs for kernel length, as well as putative candidate genes that might influence kernel length in wild barley. A recombinant inbred line (RIL) population derived from the barley cultivar Baudin (H. vulgare ssp. vulgare) and the long-kernel wild barley genotype Awcs276 (H.vulgare ssp. spontaneum) was evaluated at one location over three years. A high-density genetic linkage map was constructed using 1,832 genome-wide diversity array technology (DArT) markers, spanning a total of 927.07 cM with an average interval of approximately 0.49 cM. Two major QTLs for kernel length, LEN-3H and LEN-4H, were detected across environments and further validated in a second RIL population derived from Fleet (H. vulgare ssp. vulgare) and Awcs276. In addition, a systematic search of public databases identified four candidate genes and four categories of proteins related to LEN-3H and LEN-4H. This study establishes a fundamental research platform for genomic studies and marker-assisted selection, since LEN-3H and LEN-4H could be used for accelerating progress in barley breeding programs that aim to improve kernel length.

A comparison of safety belt use between commercial and noncommercial light-vehicle occupants.

Science.gov (United States)

Eby, David W; Fordyce, Tiffani A; Vivoda, Jonathon M

2002-05-01

The purpose of this study was to conduct an observational survey of safety belt use to determine the use rate of commercial versus noncommercial light-vehicle occupants. Observations were conducted on front-outboard vehicle occupants in eligible commercial and noncommercial vehicles in Michigan (i.e.. passenger cars, vans/minivans, sport-utility vehicles, and pickup trucks). Commercial vehicles that did not fit into one of the four vehicle type categories, such as tractor-trailers, buses, or heavy trucks, were not included in the survey. The study found that the restraint use rate for commercial light-vehicle occupants was 55.8% statewide. The statewide safety belt use rate for commercial light-vehicles was significantly lower than the rate of 71.2% for noncommercial light-vehicles. The safety belt use rate for commercial vehicles was also significantly different as a function of region, vehicle type, seating position, age group, and road type. The results provide important preliminary data about safety belt use in commercial versus noncommercial light-vehicles and indicate that further effort is needed to promote safety belt use in the commercial light-vehicle occupant population. The study also suggests that additional research is required in order to develop effective programs that address low safety belt use in the commercial light-vehicle occupant population.

Biomass energy systems program summary

Energy Technology Data Exchange (ETDEWEB)

None

1980-07-01

Research programs in biomass which were funded by the US DOE during fiscal year 1978 are listed in this program summary. The conversion technologies and their applications have been grouped into program elements according to the time frame in which they are expected to enter the commercial market. (DMC)

Word length, set size, and lexical factors: Re-examining what causes the word length effect.

Science.gov (United States)

Guitard, Dominic; Gabel, Andrew J; Saint-Aubin, Jean; Surprenant, Aimée M; Neath, Ian

2018-04-19

The word length effect, better recall of lists of short (fewer syllables) than long (more syllables) words has been termed a benchmark effect of working memory. Despite this, experiments on the word length effect can yield quite different results depending on set size and stimulus properties. Seven experiments are reported that address these 2 issues. Experiment 1 replicated the finding of a preserved word length effect under concurrent articulation for large stimulus sets, which contrasts with the abolition of the word length effect by concurrent articulation for small stimulus sets. Experiment 2, however, demonstrated that when the short and long words are equated on more dimensions, concurrent articulation abolishes the word length effect for large stimulus sets. Experiment 3 shows a standard word length effect when output time is equated, but Experiments 4-6 show no word length effect when short and long words are equated on increasingly more dimensions that previous demonstrations have overlooked. Finally, Experiment 7 compared recall of a small and large neighborhood words that were equated on all the dimensions used in Experiment 6 (except for those directly related to neighborhood size) and a neighborhood size effect was still observed. We conclude that lexical factors, rather than word length per se, are better predictors of when the word length effect will occur. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

78 FR 17875 - Commercial Driver's License Testing and Commercial Learner's Permit Standards

Science.gov (United States)

2013-03-25

... [Docket No. FMCSA-2007-27659] RIN 2126-AB59 Commercial Driver's License Testing and Commercial Learner's.... The 2011 final rule amended the commercial driver's license (CDL) knowledge and skills testing standards and established new minimum Federal standards for States to issue the commercial learner's permit...

Accelerating the commercialization of university technologies for military healthcare applications: the role of the proof of concept process

Science.gov (United States)

Ochoa, Rosibel; DeLong, Hal; Kenyon, Jessica; Wilson, Eli

2011-06-01

The von Liebig Center for Entrepreneurism and Technology Advancement at UC San Diego (vonliebig.ucsd.edu) is focused on accelerating technology transfer and commercialization through programs and education on entrepreneurism. Technology Acceleration Projects (TAPs) that offer pre-venture grants and extensive mentoring on technology commercialization are a key component of its model which has been developed over the past ten years with the support of a grant from the von Liebig Foundation. In 2010, the von Liebig Entrepreneurism Center partnered with the U.S. Army Telemedicine and Advanced Technology Research Center (TATRC), to develop a regional model of Technology Acceleration Program initially focused on military research to be deployed across the nation to increase awareness of military medical needs and to accelerate the commercialization of novel technologies to treat the patient. Participants to these challenges are multi-disciplinary teams of graduate students and faculty in engineering, medicine and business representing universities and research institutes in a region, selected via a competitive process, who receive commercialization assistance and funding grants to support translation of their research discoveries into products or services. To validate this model, a pilot program focused on commercialization of wireless healthcare technologies targeting campuses in Southern California has been conducted with the additional support of Qualcomm, Inc. Three projects representing three different universities in Southern California were selected out of forty five applications from ten different universities and research institutes. Over the next twelve months, these teams will conduct proof of concept studies, technology development and preliminary market research to determine the commercial feasibility of their technologies. This first regional program will help build the needed tools and processes to adapt and replicate this model across other regions in the

77 FR 26989 - Commercial Driver's License Testing and Commercial Learner's Permit Standards

Science.gov (United States)

2012-05-08

... [Docket No. FMCSA-2007-27659] RIN 2126-AB02 Commercial Driver's License Testing and Commercial Learner's... effective on July 8, 2011. That final rule amended the commercial driver's license (CDL) knowledge and skills testing standards and established new minimum Federal standards for States to issue the commercial...

Gap length distributions by PEPR

International Nuclear Information System (INIS)

Warszawer, T.N.

1980-01-01

Conditions guaranteeing exponential gap length distributions are formulated and discussed. Exponential gap length distributions of bubble chamber tracks first obtained on a CRT device are presented. Distributions of resulting average gap lengths and their velocity dependence are discussed. (orig.)

Commercial Space Port Planning in Texas

Science.gov (United States)

Bell, L.; Looke, B.

2002-01-01

The Texas Legislature is providing funding to support research and planning activities aimed at creating a commercial spaceport in the state. These monies have been allocated to regional Spaceport Development Corporations that have been established in three countries containing candidate site locations: Willacy County (in South Texas); Brazoria County (East Texas); and Pecos County (West Texas). This program is being sponsored and coordinated by the Texas Aerospace Commission (TAC). The Sasakawa International Center for Space Architecture (SICSA) at the University of Houston is providing research, planning and design support to TAC and is a member of each of the three regional development teams. Planning must carefully consider special support requirements and operational characteristics of all prospective launch systems along with geographic, infrastructure and environmental factors at each site. Two of the candidate sites are in coastal areas; a priority for certain launch service providers; whereas the third inland site is more attractive to others. Candidate launch systems include winged horizontal takeoff air-launch vehicles, vertical multi-stage reusable launch vehicles, and expendable sub-orbital surrounding rockets. Important research and planning activities include environmental impact assessments, analyses of overflight hazards, investigations of economic impacts and business plan development. The results of these activities will guide master plan development for each site, including: a physical plan (site layout, infrastructure improvements and facility construction); and a strategic plan (user agreements, licenses, finance sources and participants). Commercial spaceport development demands compliance with stringent FAA regulations established by the Office of Commercial Space Transportation (OCST) which exceed minimum standards allowed for U.S. Government spaceport facilities. Key among these requirements are 15,000 ft. radius on-site clear zones

Finite-difference modeling of commercial aircraft using TSAR

Energy Technology Data Exchange (ETDEWEB)

Pennock, S.T.; Poggio, A.J.

1994-11-15

Future aircraft may have systems controlled by fiber optic cables, to reduce susceptibility to electromagnetic interference. However, the digital systems associated with the fiber optic network could still experience upset due to powerful radio stations, radars, and other electromagnetic sources, with potentially serious consequences. We are modeling the electromagnetic behavior of commercial transport aircraft in support of the NASA Fly-by-Light/Power-by-Wire program, using the TSAR finite-difference time-domain code initially developed for the military. By comparing results obtained from TSAR with data taken on a Boeing 757 at the Air Force Phillips Lab., we hope to show that FDTD codes can serve as an important tool in the design and certification of U.S. commercial aircraft, helping American companies to produce safe, reliable air transportation.

A validation of the fibre orientation and fibre length attrition prediction for long fibre-reinforced thermoplastics

Science.gov (United States)

Hopmann, Ch.; Weber, M.; van Haag, J.; Schöngart, M.

2015-05-01

To improve the mechanical performance of polymeric parts, fibre reinforcement has established in industrial applications during the last decades. Next to the widely used Short Fibre-reinforced Thermoplastics (SFT) the use of Long Fibre-reinforced Thermoplastics (LFT) is increasingly growing. Especially for non-polar polymeric matrices like polypropylene (PP), longer fibres can significantly improve the mechanical performance. As with every kind of discontinuous fibre reinforcement the fibre orientations (FO) show a high impact on the mechanical properties. On the contrary to SFT where the local fibre length distribution (FLD) can be often neglected, for LFT the FLD show a high impact on the material's properties and has to be taken into account in equal measure to the FOD. Recently numerical models are available in commercial filling simulation software and allow predicting both the local FOD and FLD in LFT parts. The aim of this paper is to compare i.) the FOD results and ii) the FLD results from available orientation- and fibre length attrition-models to those obtained from experimental data. The investigations are conducted by the use of different injection moulded specimens made from long glass fibre reinforced PP. In order to determine the FOD, selected part sections are examined by means of Computed Tomographic (CT) analyses. The fully three dimensional measurement of the FOD is then performed by digital image processing using grey scale correlation. The FLD results are also obtained by using digital image processing after a thermal pyrolytic separation of the polymeric matrix from the fibres. Further the FOD and the FLD are predicted by using a reduced strain closure (RSC) as well as an anisotropic rotary diffusion - reduced strain closure model (ARD-RSC) and Phelps-Tucker fibre length attrition model implemented in the commercial filling software Moldflow, Autodesk Inc., San Rafael, CA, USA.

A validation of the fibre orientation and fibre length attrition prediction for long fibre-reinforced thermoplastics

International Nuclear Information System (INIS)

Hopmann, Ch.; Weber, M.; Haag, J. van; Schöngart, M.

2015-01-01

To improve the mechanical performance of polymeric parts, fibre reinforcement has established in industrial applications during the last decades. Next to the widely used Short Fibre-reinforced Thermoplastics (SFT) the use of Long Fibre-reinforced Thermoplastics (LFT) is increasingly growing. Especially for non-polar polymeric matrices like polypropylene (PP), longer fibres can significantly improve the mechanical performance. As with every kind of discontinuous fibre reinforcement the fibre orientations (FO) show a high impact on the mechanical properties. On the contrary to SFT where the local fibre length distribution (FLD) can be often neglected, for LFT the FLD show a high impact on the material’s properties and has to be taken into account in equal measure to the FOD. Recently numerical models are available in commercial filling simulation software and allow predicting both the local FOD and FLD in LFT parts. The aim of this paper is to compare i.) the FOD results and ii) the FLD results from available orientation- and fibre length attrition-models to those obtained from experimental data. The investigations are conducted by the use of different injection moulded specimens made from long glass fibre reinforced PP. In order to determine the FOD, selected part sections are examined by means of Computed Tomographic (CT) analyses. The fully three dimensional measurement of the FOD is then performed by digital image processing using grey scale correlation. The FLD results are also obtained by using digital image processing after a thermal pyrolytic separation of the polymeric matrix from the fibres. Further the FOD and the FLD are predicted by using a reduced strain closure (RSC) as well as an anisotropic rotary diffusion - reduced strain closure model (ARD-RSC) and Phelps-Tucker fibre length attrition model implemented in the commercial filling software Moldflow, Autodesk Inc., San Rafael, CA, USA

A validation of the fibre orientation and fibre length attrition prediction for long fibre-reinforced thermoplastics

Energy Technology Data Exchange (ETDEWEB)

Hopmann, Ch.; Weber, M.; Haag, J. van; Schöngart, M. [Institute of Plastics Processing (IKV) at RWTH Aachen University, Pontstr. 49, 52062 Aachen (Germany)

2015-05-22

To improve the mechanical performance of polymeric parts, fibre reinforcement has established in industrial applications during the last decades. Next to the widely used Short Fibre-reinforced Thermoplastics (SFT) the use of Long Fibre-reinforced Thermoplastics (LFT) is increasingly growing. Especially for non-polar polymeric matrices like polypropylene (PP), longer fibres can significantly improve the mechanical performance. As with every kind of discontinuous fibre reinforcement the fibre orientations (FO) show a high impact on the mechanical properties. On the contrary to SFT where the local fibre length distribution (FLD) can be often neglected, for LFT the FLD show a high impact on the material’s properties and has to be taken into account in equal measure to the FOD. Recently numerical models are available in commercial filling simulation software and allow predicting both the local FOD and FLD in LFT parts. The aim of this paper is to compare i.) the FOD results and ii) the FLD results from available orientation- and fibre length attrition-models to those obtained from experimental data. The investigations are conducted by the use of different injection moulded specimens made from long glass fibre reinforced PP. In order to determine the FOD, selected part sections are examined by means of Computed Tomographic (CT) analyses. The fully three dimensional measurement of the FOD is then performed by digital image processing using grey scale correlation. The FLD results are also obtained by using digital image processing after a thermal pyrolytic separation of the polymeric matrix from the fibres. Further the FOD and the FLD are predicted by using a reduced strain closure (RSC) as well as an anisotropic rotary diffusion - reduced strain closure model (ARD-RSC) and Phelps-Tucker fibre length attrition model implemented in the commercial filling software Moldflow, Autodesk Inc., San Rafael, CA, USA.

Hanford Tank Initiative (HTI) and Acquire Commercial Technology for Retrieval Report and Database

International Nuclear Information System (INIS)

SEDERBURG, J. P

2000-01-01

The data base is an annotated bibliography of technology evaluations and demonstrations conducted in previous years by the Hanford Tank Initiative (HTI) and the Acquire Commercial Technology for Retrieval (ACTR) programs

48 CFR 212.7002 - Pilot program.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Pilot program. 212.7002... OF DEFENSE ACQUISITION PLANNING ACQUISITION OF COMMERCIAL ITEMS Pilot Program for Transition to Follow-On Contracting After Use of Other Transaction Authority 212.7002 Pilot program. ...

Investigation on the inertial cavitation threshold and shell properties of commercialized ultrasound contrast agent microbubbles.

Science.gov (United States)

Guo, Xiasheng; Li, Qian; Zhang, Zhe; Zhang, Dong; Tu, Juan

2013-08-01

The inertial cavitation (IC) activity of ultrasound contrast agents (UCAs) plays an important role in the development and improvement of ultrasound diagnostic and therapeutic applications. However, various diagnostic and therapeutic applications have different requirements for IC characteristics. Here through IC dose quantifications based on passive cavitation detection, IC thresholds were measured for two commercialized UCAs, albumin-shelled KangRun(®) and lipid-shelled SonoVue(®) microbubbles, at varied UCA volume concentrations (viz., 0.125 and 0.25 vol. %) and acoustic pulse lengths (viz., 5, 10, 20, 50, and 100 cycles). Shell elastic and viscous coefficients of UCAs were estimated by fitting measured acoustic attenuation spectra with Sarkar's model. The influences of sonication condition (viz., acoustic pulse length) and UCA shell properties on IC threshold were discussed based on numerical simulations. Both experimental measurements and numerical simulations indicate that IC thresholds of UCAs decrease with increasing UCA volume concentration and acoustic pulse length. The shell interfacial tension and dilatational viscosity estimated for SonoVue (0.7 ± 0.11 N/m, 6.5 ± 1.01 × 10(-8) kg/s) are smaller than those of KangRun (1.05 ± 0.18 N/m, 1.66 ± 0.38 × 10(-7) kg/s); this might result in lower IC threshold for SonoVue. The current results will be helpful for selecting and utilizing commercialized UCAs for specific clinical applications, while minimizing undesired IC-induced bioeffects.

SEU blending project concept to commercial operation. Part 1: process development

International Nuclear Information System (INIS)

Ioffe, M.S.; Bhattacharjee, S.; Oliver, A.J.; Ozberk, E.

2004-01-01

The process development test program for production of Slightly Enriched Uranium (SEU) dioxide powder had started with 100 g Low Enriched Uranium (LEU) dioxide powder samples obtained from different suppliers. Encouraging results obtained in the initial test program established a basis for working with 9.5 kg LEU powder samples and production of larger quantities of SEU powder for characterization to meet the target quality and ensuring development of process design criteria for the commercial scale plant design. Similarly, the process development test program for production of Blended Dysprosium and Uranium (BDU) oxide powders was initiated using different Dy 2 O 3 powder samples from different suppliers. The variability of the quality of Dy 2 O 3 powder samples received from different suppliers resulted in substantial investigation in characterization of Dy 2 O 3 powders. The test program for both products required forming a cross-functional project team from several departments within Cameco with the focus of the development work to be carried out at the Cameco Technology Development. Many aspects of developing two new products were addressed. These included developing design criteria for preparation of SEU and BDU powders for a Demonstration Irradiation (DI) program and commercial scale plant, Quality Assurance program (including specifications for SEU and BDU powder products, SEU and BDU scraps, Cameco Quality Specifications for purchasing LEU and Dy 2 O 3 powders, and Inspection and Test Plan for SEU and BDU powder production), accurate uranium accountability, enhanced safety requirements, bench and laboratory test safety and operability manuals and procedures for analysis. (author)

Cutting Whole Length or Partial Length of Internal Anal Sphincter in Managementof Fissure in Ano

Directory of Open Access Journals (Sweden)

Furat Shani Aoda

2017-12-01

Full Text Available A chronic anal fissure is a common painful perianal condition.The main operative procedure to treat this painful condition is a lateral internal sphincteretomy (LIS.The aim of study is to compare the outcome and complications of closed LIS up to the dentate line (whole length of internal sphincter or up to the fissure apex (partial length of internal sphincter in the treatment of anal fissure.It is a prospective comparativestudy including 100 patients with chronic fissure in ano. All patients assigned to undergo closed LIS. Those patients were randomly divided into two groups: 50 patients underwent LIS to the level of dentate line (whole length and other 50 patients underwent LIS to the level of fissure apex (partial length. Patients were followed up weekly in the 1st month, twice monthly in the second month then monthly   for next 2 months and finally after 1 year. There was satisfactory relief of pain in all patients in both groups & complete healing of the fissure occurred. Regarding post operative incontinence no major degree of incontinence occur in both group but minor degree of incontinence persists In 7 patients after whole length LIS after one year. In conclusion, both whole length & partial length LIS associated with improvement of pain, good chance of healing but whole length LIS associated with more chance of long term  flatus incontinence. Hence,we recommend partial length LIS as treatment forchronic anal fissure.

Sequential optimization of approximate inhibitory rules relative to the length, coverage and number of misclassifications

KAUST Repository

Alsolami, Fawaz; Chikalov, Igor; Moshkov, Mikhail

2013-01-01

This paper is devoted to the study of algorithms for sequential optimization of approximate inhibitory rules relative to the length, coverage and number of misclassifications. Theses algorithms are based on extensions of dynamic programming approach

Commercial Space with Technology Maturation

Science.gov (United States)

McCleskey, Carey M.; Rhodes, Russell E.; Robinson, John W.

2013-01-01

To provide affordable space transportation we must be capable of using common fixed assets and the infrastructure for multiple purposes simultaneously. The Space Shuttle was operated for thirty years, but was not able to establish an effective continuous improvement program because of the high risk to the crew on every mission. An unmanned capability is needed to provide an acceptable risk to the primary mission. This paper is intended to present a case where a commercial space venture could share the large fixed cost of operating the infrastructure with the government while the government provides new advanced technology that is focused on reduced operating cost to the common launch transportation system. A conceivable commercial space venture could provide educational entertainment for the country's youth that would stimulate their interest in the science, technology, engineering, and mathematics (STEM) through access at entertainment parks or the existing Space Visitor Centers. The paper uses this example to demonstrate how growing public-private space market demand will re-orient space transportation industry priorities in flight and ground system design and technology development, and how the infrastructure is used and shared.

Telomere length and depression

DEFF Research Database (Denmark)

Wium-Andersen, Marie Kim; Ørsted, David Dynnes; Rode, Line

2017-01-01

BACKGROUND: Depression has been cross-sectionally associated with short telomeres as a measure of biological age. However, the direction and nature of the association is currently unclear. AIMS: We examined whether short telomere length is associated with depression cross-sectionally as well...... as prospectively and genetically. METHOD: Telomere length and three polymorphisms, TERT, TERC and OBFC1, were measured in 67 306 individuals aged 20-100 years from the Danish general population and associated with register-based attendance at hospital for depression and purchase of antidepressant medication....... RESULTS: Attendance at hospital for depression was associated with short telomere length cross-sectionally, but not prospectively. Further, purchase of antidepressant medication was not associated with short telomere length cross-sectionally or prospectively. Mean follow-up was 7.6 years (range 0...

Phenotypic and genotypic variability of disc flower corolla length and nectar content in sunflower

Directory of Open Access Journals (Sweden)

Joksimović Jovan

2003-01-01

Full Text Available The nectar content and disc flower corolla length are the two most important parameters of attractiveness to pollinators in sunflower. The phenotypic and genotypic variability of these two traits was studied in four commercially important hybrids and their parental components in a trial with three fertilizer doses over two years. The results showed that, looking at individual genotypes, the variability of disc flower corolla length was affected the most by year (85.38-97.46%. As the study years were extremely different, the phenotypic variance of the hybrids and parental components was calculated for each year separately. In such conditions, looking at all of the crossing combinations, the largest contribution to phenotypic variance of the corolla length was that of genotype: 57.27-61.11% (NS-H-45 64.51-84.84% (Velja; 96.74-97.20% (NS-H-702 and 13.92-73.17% (NS-H-111. A similar situation was observed for the phenotypic variability of nectar content, where genotype also had the largest influence, namely 39.77-48.25% in NS-H-45; 39.06-42.51% in Velja; 31.97-72.36% in NS-H-702; and 62.13-94.96% in NS-H-111.

1989 state-by-state assessment of low-level radioactive wastes received at commercial disposal sites: National Low-Level Waste Management Program

International Nuclear Information System (INIS)

Fuchs, R.L.; Culbertson-Arendts, K.

1990-12-01

The National Low-Level Waste Management Program has published eleven annual state-by-state assessment reports. These reports provide both national and state-specific disposal data on low-level radioactive wastes. Data in this report are divided into generator category, waste class, volume, and activity. Included in this report are tables showing a distribution of wastes by state for 1989 and a comparison of waste volumes by state for 1985 through 1989; also included is a list of all commercial nuclear power reactors in the United States as of December 31, 1989. In this year's report, a distinction has been made between low-level radioactive waste shipped directly for disposal by generators and that handled by an intermediary. 7 refs., 4 tabs

Astronauts For Hire The Emergence of a Commercial Astronaut Corps

CERN Document Server

Seedhouse, Erik

2012-01-01

The spaceflight industry is being revolutionized. It is no longer the sole preserve of professional astronauts working on government-funded manned spaceflight programs. As private companies are being encouraged to build and operate launch vehicles, and even spacecraft that can be hired on a contract basis, a new breed of astronauts is coming into being. Astronauts for Hire describes how this commercial astronaut corps will be selected and trained. It provides a unique insight into the kinds of missions and tasks that the astronauts will be involved in, from suborbital science missions to commercial trips to low Earth orbit. The book also describes the new fleet of commercial spaceships being developed - reusable rocket-propelled vehicles that will offer quick, routine, and affordable access to the edge of space. The author also explores the possibility of private enterprise establishing interplanetary spaceports, lunar bases, and outposts on the surface of Mars.

Long length coated conductor fabrication by inclined substrate deposition and evaporation

Energy Technology Data Exchange (ETDEWEB)

Prusseit, W [THEVA Duennschichttechnik GmbH, Rote-Kreuz-Str. 8, 85737 Ismaning (Germany); Hoffmann, C [THEVA Duennschichttechnik GmbH, Rote-Kreuz-Str. 8, 85737 Ismaning (Germany); Nemetschek, R [THEVA Duennschichttechnik GmbH, Rote-Kreuz-Str. 8, 85737 Ismaning (Germany); Sigl, G [THEVA Duennschichttechnik GmbH, Rote-Kreuz-Str. 8, 85737 Ismaning (Germany); Handke, J [THEVA Duennschichttechnik GmbH, Rote-Kreuz-Str. 8, 85737 Ismaning (Germany); Luemkemann, A [Technical University Munich, James- Franck-Str. 1, 85748 Garching (Germany); Kinder, H [Technical University Munich, James- Franck-Str. 1, 85748 Garching (Germany)

2006-06-01

The commercial development of coated conductors is rapidly progressing. As a result we present an economic route to produce second generation HTS tape from the initial substrate preparation to the final metal coating. The most important and technically challenging steps are the deposition of an oriented buffer layer and the superconductor film in a reel-to-reel configuration. New evaporation techniques have been developed to enable reliable, high rate tape coating. Highly oriented MgO - buffer layers are realized by inclined substrate deposition (ISD) and DyBCO is deposited by simple e-gun evaporation yielding critical currents beyond 200 A/cm. Coated conductors have been fabricated up to 40 m length and are currently tested in a variety of applications.

47 CFR 73.788 - Service; commercial or sponsored programs.

Science.gov (United States)

2010-10-01

... goodwill, understanding, and cooperation. Any program solely intended for and directed to an audience in... broadcasting stations are the zones and areas of reception shown in § 73.703. (d) An international broadcast...

A Dual-Mode UWB Wireless Platform with Random Pulse Length Detection for Remote Patient Monitoring

DEFF Research Database (Denmark)

Reyes, Carlos; Bisbe, Sergi; Shen, Ming

2013-01-01

on a single hardware platform, but it is capable of both monitoring and data transmission. This is achieved by employing a new random pulse length detection method that allows data transmission by using a modulated monitoring signal. To prove the proposed concept a test system has been built, using commercial......This paper presents a dual-mode ultra-wideband platform for wireless Remote Patient Monitoring (RPM). Existing RPM solutions are typically based on two different hardware platforms; one responsible for medical-data monitoring and one to handle data transmission. The proposed RPM topology is based...

45 CFR 74.24 - Program income.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Program income. 74.24 Section 74.24 Public Welfare... COMMERCIAL ORGANIZATIONS Post-Award Requirements Financial and Program Management § 74.24 Program income. (a) The standards set forth in this section shall be used to account for program income related to...

Tritium and plutonium production as a step toward ICF commercialization

International Nuclear Information System (INIS)

Pendergrass, J.H.; Dudziak, D.J.

1984-01-01

The feasibility of a combined special nuclear materials (SNM) production plant/engineering test facility (ETF) with reduced pellet and driver performance requirements as a step toward commercialization of inertial confinement fusion (ICF) is examined. Blanket design and tritium production cost studies, the status of RandD programs, and the ETF role are emphasized

Commercially available molecular tests for human papillomaviruses (HPV): 2015 update.

Science.gov (United States)

Poljak, Mario; Kocjan, Boštjan J; Oštrbenk, Anja; Seme, Katja

2016-03-01

Commercial molecular tests for human papillomaviruses (HPV) are invaluable diagnostic tools in cervical carcinoma screening and management of women with cervical precancerous lesions as well as important research tools for epidemiological studies, vaccine development, and implementation and monitoring of vaccination programs. In this third inventory of commercial HPV tests, we identified 193 distinct commercial HPV tests and at least 127 test variants available on the market in 2015, which represents a 54% and 79% increase in the number of distinct HPV tests and variants, respectively, in comparison to our last inventory performed in 2012. Identified HPV tests were provisionally divided into eight main groups and several subgroups. Among the 193 commercial HPV tests, all but two target alpha-HPV types only. Although the number of commercial HPV tests with at least one published study in peer-reviewed literature has increased significantly in the last three years, several published performance evaluations are still not in line with agreed-upon standards in the HPV community. Manufacturers should invest greater effort into evaluating their products and publishing validation/evaluation results in peer-reviewed journals. To achieve this, more clinically oriented external quality-control panels and initiatives are required. For evaluating the analytical performance of the entire range of HPV tests currently on the market, more diverse and reliable external quality-control programs based on international standards for all important HPV types are indispensable. The performance of a wider range of HPV tests must be promptly evaluated on a variety of alternative clinical specimens. In addition, more complete HPV assays containing validated sample-extraction protocols and appropriate internal controls are urgently needed. Provision of a broader range of automated systems allowing large-scale HPV testing as well as the development of reliable, rapid, and affordable molecular

A QoS-Based Dynamic Queue Length Scheduling Algorithm in Multiantenna Heterogeneous Systems

Directory of Open Access Journals (Sweden)

Verikoukis Christos

2010-01-01

Full Text Available The use of real-time delay-sensitive applications in wireless systems has significantly grown during the last years. Therefore the designers of wireless systems have faced a challenging issue to guarantee the required Quality of Service (QoS. On the other hand, the recent advances and the extensive use of multiple antennas have already been included in several commercial standards, where the multibeam opportunistic transmission beamforming strategies have been proposed to improve the performance of the wireless systems. A cross-layer-based dynamically tuned queue length scheduler is presented in this paper, for the Downlink of multiuser and multiantenna WLAN systems with heterogeneous traffic requirements. To align with modern wireless systems transmission strategies, an opportunistic scheduling algorithm is employed, while a priority to the different traffic classes is applied. A tradeoff between the maximization of the throughput of the system and the guarantee of the maximum allowed delay is obtained. Therefore, the length of the queue is dynamically adjusted to select the appropriate conditions based on the operator requirements.

US program for the immobilization of high-level nuclear wastes

International Nuclear Information System (INIS)

Crandall, J.L.

1979-01-01

A program has been developed for long-term management of high-level nuclear waste. The Savannah River Operations Office of the US Department of Energy is acting as the lead office for this program with technical advice from the E.I. du Pont de Nemours and Company. The purpose of the long-term program is to immobilize the DOE high-level waste in forms that act as highly efficient barriers against radionuclide release to the disposal site and to provide technology for similar treatment of commercial high-level waste in case reprocessing of commercial nuclear fuels is ever resumed. Descriptions of existing DOE and commercial wastes, program strategy, program expenditures, development of waste forms, evaluation and selection of waste forms, regulatory aspects of waste form selection, project schedules, and cost estimates for immobilization facilities are discussed

Note: Making tens of centimeter long uniform microfluidic channels using commercial glass pipette

Science.gov (United States)

Ou, Neil; Lee, Huang-Ming; Wu, Jong-Ching

2018-03-01

Producing microchannels with diameters between 10 and 20 μm and with lengths in the tens of centimeters is reported. The method can be modified to obtain diameters as narrow as 350 nm. Length-to-diameter aspect ratios that surpass 104 can be produced for a fraction of current production costs. The controllable channel is produced by applying a flame to the narrow end of a commercial pipette that is made from a soda-lime silicate. In combination with a pulling mechanism, applying heat to the composite material lengthens the pipette in a highly uniform way. Given that the materials and methods in this research are cost-effective when compared to femtosecond laser micromachining on 2D silicon-based surfaces, further research into producing microchannels from soda-lime silicates may revolutionize access to 3D controllable microchannels.

Generic impact statement for commercial radioactive waste management

International Nuclear Information System (INIS)

Unruh, C.M.

1976-01-01

ERDA is preparing a generic environmental impact statement on the treatment and disposal of waste resulting from commercial reactors and post fission operations in the light water reactor (LWR) fuel cycle. Expert contributions will be provided by many of the ERDA national laboratories and contractors. The waste management aspects of the statement will be based on available technology as presented in the recently issued ''Alternatives for Managing Waste from Reactors and Post Fission Operations in the LWR Fuel Cycle,'' ERDA-76-43 Document. This 1500 page, five volume Technical Alternative Document (TAD) describes the status of technology (to September, 1975) for handling post fission radioactive waste generated by the production of electricity by nuclear power light water reactor-generator systems. The statement will be generic in nature discussing typical or hypothetical facilities in typical or hypothetical environments. It is not intended to replace environmental statements required in support of specific projects nor for Nuclear Regulatory Commission licensing procedures. A major purpose of the generic statement is to inform the public and to solicit comments on the ERDA program for: (1) the final disposition of commercial radioactive waste, (2) waste treatment, (3) waste interim storage, and (4) transportation of waste. The statement will discuss the ERDA contingency program to provide retrievable storage of such waste if they should be transferred to Federal custody prior to the availability of the geologic isolation facilities for terminal disposal. The generic statement will not address radioactive waste resulting from U.S. Defense Programs, the mining or milling of uranium, the management of waste from the breeder reactor program, waste from other nations, nor will it include an evaluation of the impact of waste resulting from power sources other than light water reactors

Fermilab advanced computer program multi-microprocessor project

International Nuclear Information System (INIS)

Nash, T.; Areti, H.; Biel, J.

1985-06-01

Fermilab's Advanced Computer Program is constructing a powerful 128 node multi-microprocessor system for data analysis in high-energy physics. The system will use commercial 32-bit microprocessors programmed in Fortran-77. Extensive software supports easy migration of user applications from a uniprocessor environment to the multiprocessor and provides sophisticated program development, debugging, and error handling and recovery tools. This system is designed to be readily copied, providing computing cost effectiveness of below $2200 per VAX 11/780 equivalent. The low cost, commercial availability, compatibility with off-line analysis programs, and high data bandwidths (up to 160 MByte/sec) make the system an ideal choice for applications to on-line triggers as well as an offline data processor

Alloy development for irradiation performance: program strategy

International Nuclear Information System (INIS)

Bloom, E.E.; Stiegler, J.O.; Wiffen, F.W.; Dalder, E.N.C.; Reuther, T.C.; Gold, R.E.; Holmes, J.J.; Kummer, D.L.; Nolfi, F.V.

1978-01-01

The objective of the Alloy Development for Irradiation Performance Program is the development of structural materials for use in the first wall and blanket region of fusion reactors. The goal of the program is a material that will survive an exposure of 40 MWyr/m 2 at a temperature which will allow use of a liquid-H 2 O heat transport system. Although the ultimate aim of the program is development of materials for commercial reactors by the end of this century, activities are organized to provide materials data for the relatively low performance interim machines that will precede commercial reactors

Obstructive sleep apnea among commercial motor vehicle drivers: using evidence-based practice to identify risk factors.

Science.gov (United States)

Olszewski, Kimberly; Wolf, Debra

2013-11-01

Commercial motor vehicle driving is a hazardous occupation, having the third highest fatality rate among common U.S. jobs. Among the estimated 14 million U.S. commercial motor vehicle drivers, the prevalence of obstructive sleep apnea is reported to be 17% to 28%. Despite the identified increased prevalence of obstructive sleep apnea among commercial motor vehicle drivers, federal law does not require that they be screened for obstructive sleep apnea. This article presents an evidence-based practice change project; the authors developed, implemented, and evaluated a screening program to identify commercial motor vehicle drivers' risk for obstructive sleep apnea during commercial driver medical examinations. The results of this practice change indicated screening for obstructive sleep apnea during the commercial driver medical examination led to improved identification of obstructive sleep apnea risk among commercial motor vehicle drivers and should be a clinical standard in occupational health clinics. Copyright 2013, SLACK Incorporated.

Commercial and institutional consumption of energy survey

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-12-15

This paper presented the results of a survey on 2004 energy consumption data for commercial and institutional establishments in Canada. The objective of the survey was to enable Natural Resources Canada to develop programs to support institutions seeking to gain greater energy efficiency and reduce greenhouse gas (GHG) emissions. Data were published by energy source and region. Energy intensity data were presented by region amongst the following commercial and institutional sectors: retail trade including food and non-food; education including colleges and universities; health care including non-hospital health care and hospitals; and accommodation and food services. Data obtained on each establishment's energy consumption and floor area were used to calculate their energy intensity ratio which included accounting for weather conditions, age of buildings and energy sources. It was observed that commercial and institutional establishments consumed nearly 945 million gigajoules in 2004. The wholesale trade and warehousing sector used the highest amount of energy, accounting for 17 per cent of all commercial and institutional energy use. The education sector accounted for 16 per cent of energy use, while the office sector accounted for 14 per cent. The energy intensity rate of hospitals in Canada was the highest of all sectors and subsectors, due to their nearly constant use of lighting and medical equipment. Retail trade accounted for the largest share of establishments at 26 per cent of all establishments, followed by offices with 22 per cent. Education accounted for the largest percentage of floor area. 4 tabs., 10 figs.

16 CFR 1020.4 - What is the Small Business Program?

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false What is the Small Business Program? 1020.4 Section 1020.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL SMALL BUSINESS § 1020.4 What is the Small Business Program? (a) Whenever the Commission is aware of the interests of small...

Final environmental impact statement. Management of commercially generated radioactive waste. Volume 2. Appendices

Energy Technology Data Exchange (ETDEWEB)

1980-10-01

This EIS analyzes the significant environmental impacts that could occur if various technologies for management and disposal of high-level and transuranic wastes from commercial nuclear power reactors were to be developed and implemented. This EIS will serve as the environmental input for the decision on which technology, or technologies, will be emphasized in further research and development activities in the commercial waste management program. The action proposed in this EIS is to (1) adopt a national strategy to develop mined geologic repositories for disposal of commercially generated high-level and transuranic radioactive waste (while continuing to examine subseabed and very deep hole disposal as potential backup technologies) and (2) conduct a R and D program to develop such facilities and the necessary technology to ensure the safe long-term containment and isolation of these wastes. The Department has considered in this statement: development of conventionally mined deep geologic repositories for disposal of spent fuel from nuclear power reactors and/or radioactive fuel reprocessing wastes; balanced development of several alternative disposal methods; and no waste disposal action. This volume contains appendices of supplementary data on waste management systems, geologic disposal, radiological standards, radiation dose calculation models, related health effects, baseline ecology, socio-economic conditions, hazard indices, comparison of defense and commercial wastes, design considerations, and wastes from thorium-based fuel cycle alternatives. (DMC)

Final environmental impact statement. Management of commercially generated radioactive waste. Volume 2. Appendices

International Nuclear Information System (INIS)

1980-10-01

This EIS analyzes the significant environmental impacts that could occur if various technologies for management and disposal of high-level and transuranic wastes from commercial nuclear power reactors were to be developed and implemented. This EIS will serve as the environmental input for the decision on which technology, or technologies, will be emphasized in further research and development activities in the commercial waste management program. The action proposed in this EIS is to (1) adopt a national strategy to develop mined geologic repositories for disposal of commercially generated high-level and transuranic radioactive waste (while continuing to examine subseabed and very deep hole disposal as potential backup technologies) and (2) conduct a R and D program to develop such facilities and the necessary technology to ensure the safe long-term containment and isolation of these wastes. The Department has considered in this statement: development of conventionally mined deep geologic repositories for disposal of spent fuel from nuclear power reactors and/or radioactive fuel reprocessing wastes; balanced development of several alternative disposal methods; and no waste disposal action. This volume contains appendices of supplementary data on waste management systems, geologic disposal, radiological standards, radiation dose calculation models, related health effects, baseline ecology, socio-economic conditions, hazard indices, comparison of defense and commercial wastes, design considerations, and wastes from thorium-based fuel cycle alternatives

Managing the nation's commercial high-level radioactive waste

International Nuclear Information System (INIS)

Anon.

1985-01-01

This study presents the findings and conclusions of OTA's analysis of Federal policy for the management of commercial high-level radioactive waste. Broad in scope and balanced in approach, its coverage extends from technological and organizational questions to political ramifications...the environmental impact of building repositories...and even dealing with Indian tribes affected by repository site selection and development. Emphasis is on workable strategies for implementing the National Waste Policy Act of 1982, including a mission plan for the program...a monitored retrievable storage proposal...and a report on mechanisms for financing and managing the program. Nine appendicies are included. They furnish additional data on such topics as policymaking, history, and the system issues resolved in NWPA

Tritium and plutonium production as a step toward ICF commercialization

International Nuclear Information System (INIS)

Pendergrass, J.H.; Dudziak, D.J.

1983-01-01

The feasibility of a combined special nuclear materials (SNM) production plant/engineering test facility (ETF) with reduced pellet and driver performance requirements as a step toward commercialization of inertial confinement fusion (ICF) is examined. Blanket design and tritium production cost studies, the status of R and D programs, and the ETF role are emphasized

78 FR 33262 - Energy Efficiency Program for Commercial and Industrial Equipment: Public Meeting and...

Science.gov (United States)

2013-06-04

... information, costs or prices, market shares, or other commercial matters regulated by U.S. antitrust laws. A... Energy Policy and Conservation Act of 1975 (EPCA), Public Law 94-163 (42 U.S.C. 6291-6309) established...

Commercial Satellite Imagery Analysis for Countering Nuclear Proliferation

Science.gov (United States)

Albright, David; Burkhard, Sarah; Lach, Allison

2018-05-01

High-resolution commercial satellite imagery from a growing number of private satellite companies allows nongovernmental analysts to better understand secret or opaque nuclear programs of countries in unstable or tense regions, called proliferant states. They include North Korea, Iran, India, Pakistan, and Israel. By using imagery to make these countries’ aims and capabilities more transparent, nongovernmental groups like the Institute for Science and International Security have affected the policies of governments and the course of public debate. Satellite imagery work has also strengthened the efforts of the International Atomic Energy Agency, thereby helping this key international agency build its case to mount inspections of suspect sites and activities. This work has improved assessments of the nuclear capabilities of proliferant states. Several case studies provide insight into the use of commercial satellite imagery as a key tool to educate policy makers and affect policy.

Buried Waste Integrated Demonstration Commercialization Action Plans second quarter, FY-94

International Nuclear Information System (INIS)

Kaupanger, R.M.

1994-06-01

The Federal Government is extremely good at creating knowledge and developing new technology. However, our declining market share in many industries points to a weakness in our ability to successfully commercialize new discoveries. BWID assembled a team of qualified experts with expertise in technology transfer and broad-based technology knowledge to assist with this effort. Five new technologies were chosen to develop commercialization action plans. They include Dig-Face Characterization, Imaging Infrared Interferometer for Waste Characterization, Tensor Magnetic Gradiometer, Very Early Time Electromagnetic System, and Virtual Environment Generation of Buried Waste. Each plan includes a short description of the technology, a market overview, a list of potential customers, a description of competitors and the technology's competitive advantage, the status of intellectual property, the status of technology transfer, a table of action items, commercialization contacts, and program contacts

Lessons in Commercial PACE Leadership: The Path from Legislation to Launch

Energy Technology Data Exchange (ETDEWEB)

Leventis, G; Schwartz, LC; Kramer, C; Deason, J

2018-02-27

Nonresidential buildings are responsible for over a quarter of primary energy consumption in the United States. Efficiency improvements in these buildings could result in significant energy and utility bill savings. To unlock those potential savings, a number of market barriers to energy efficiency must be addressed. Commercial Property Assessed Clean Energy (C-PACE) financing programs can help overcome several of these barriers with minimal investment from state and local governments. With programs established or under development in 22 states, and at least $521 million in investments so far, other state and local governments are interested in bringing the benefits of C-PACE to their jurisdictions. Lessons in Commercial PACE Leadership: The Path from Legislation to Launch, aims to fast track the set-up of C-PACE programs for state and local governments by capturing the lessons learned from leaders. The report examines the list of potential program design options and important decision points in setting up a C-PACE program, tradeoffs for available options, and experiences of stakeholders that have gone through (or are going through) the process. C-PACE uses a voluntary special property assessment to facilitate energy and other improvements in commercial buildings. For example: - Long financing terms under C-PACE can produce cash flow-positive -- projects to help overcome a focus on short paybacks. - Payment obligations can transfer to subsequent owners, mitigating concern about investing in improvements for a building that may be sold before the return on the investment is fully realized. - 100% of both hard and soft costs can be financed. To capture the benefits of C-PACE financing, state and local governments must navigate numerous decision points and engage with stakeholders to set-up or join a program. Researchers interviewed experts (including state and local sponsors, program administrators, capital providers and industry experts) on their lessons learned and

The Program Administrator Cost of Saved Energy for Utility Customer-Funded Energy Efficiency Programs

Energy Technology Data Exchange (ETDEWEB)

Billingsley, Megan A.; Hoffman, Ian M.; Stuart, Elizabeth; Schiller, Steven R.; Goldman, Charles A.; LaCommare, Kristina

2014-03-19

End-use energy efficiency is increasingly being relied upon as a resource for meeting electricity and natural gas utility system needs within the United States. There is a direct connection between the maturation of energy efficiency as a resource and the need for consistent, high-quality data and reporting of efficiency program costs and impacts. To support this effort, LBNL initiated the Cost of Saved Energy Project (CSE Project) and created a Demand-Side Management (DSM) Program Impacts Database to provide a resource for policy makers, regulators, and the efficiency industry as a whole. This study is the first technical report of the LBNL CSE Project and provides an overview of the project scope, approach, and initial findings, including: • Providing a proof of concept that the program-level cost and savings data can be collected, organized, and analyzed in a systematic fashion; • Presenting initial program, sector, and portfolio level results for the program administrator CSE for a recent time period (2009-2011); and • Encouraging state and regional entities to establish common reporting definitions and formats that would make the collection and comparison of CSE data more reliable. The LBNL DSM Program Impacts Database includes the program results reported to state regulators by more than 100 program administrators in 31 states, primarily for the years 2009–2011. In total, we have compiled cost and energy savings data on more than 1,700 programs over one or more program-years for a total of more than 4,000 program-years’ worth of data, providing a rich dataset for analyses. We use the information to report costs-per-unit of electricity and natural gas savings for utility customer-funded, end-use energy efficiency programs. The program administrator CSE values are presented at national, state, and regional levels by market sector (e.g., commercial, industrial, residential) and by program type (e.g., residential whole home programs, commercial new

Environmental monitoring report for commercial low-level radioactive waste disposal sites (1960's through 1990's)

International Nuclear Information System (INIS)

1996-11-01

During the time period covered in this report (1960's through early 1990's), six commercial low-level radioactive waste (LLRW) disposal facilities have been operated in the US. This report provides environmental monitoring data collected at each site. The report summarizes: (1) each site's general design, (2) each site's inventory, (3) the environmental monitoring program for each site and the data obtained as the program has evolved, and (4) what the program has indicated about releases to off-site areas, if any, including a statement of the actual health and safety significance of any release. A summary with conclusions is provided at the end of each site's chapter. The six commercial LLRW disposal sites discussed are located near: Sheffield, Illinois; Maxey Flats, Kentucky; Beatty, Nevada; West Valley, New York; Barnwell, South Carolina; Richland, Washington

Commercialization strategy for the Department of Energy's Solar Buildings Demonstration Program

Energy Technology Data Exchange (ETDEWEB)

1981-01-01

Efforts reported include: conducting a survey of existing commercial demonstration projects, categorizing these projects, determining criteria for evaluating the feasibility of continuing/aborting demonstration projects, and applying the criteria and making recommendations for which projects to continue and abort. It is recommended to refurbish 114 of the projects examined and to abandon 41. (LEW)

Design and validation of a 3D virtual reality desktop system for sonographic length and volume measurements in early pregnancy evaluation.

Science.gov (United States)

Baken, Leonie; van Gruting, Isabelle M A; Steegers, Eric A P; van der Spek, Peter J; Exalto, Niek; Koning, Anton H J

2015-03-01

To design and validate a desktop virtual reality (VR) system, for presentation and assessment of volumetric data, based on commercially off-the-shelf hardware as an alternative to a fully immersive CAVE-like I-Space VR system. We designed a desktop VR system, using a three-dimensional (3D) monitor and a six degrees-of-freedom tracking system. A personal computer uses the V-Scope (Erasmus MC, Rotterdam, The Netherlands) volume-rendering application, developed for the I-Space, to create a hologram of volumetric data. Inter- and intraobserver reliability for crown-rump length and embryonic volume measurements are investigated using Bland-Altman plots and intraclass correlation coefficients. Time required for the measurements was recorded. Comparing the I-Space and the desktop VR system, the mean difference for crown-rump length is -0.34% (limits of agreement -2.58-1.89, ±2.24%) and for embryonic volume -0.92% (limits of agreement -6.97-5.13, ±6.05%). Intra- and interobserver intraclass correlation coefficients of the desktop VR system were all >0.99. Measurement times were longer on the desktop VR system compared with the I-Space, but the differences were not statistically significant. A user-friendly desktop VR system can be put together using commercially off-the-shelf hardware at an acceptable price. This system provides a valid and reliable method for embryonic length and volume measurements and can be used in clinical practice. © 2014 Wiley Periodicals, Inc.

Collaborative applied research programs at AITF

Energy Technology Data Exchange (ETDEWEB)

Chow, Ross [Alberta Innovates Technology Futures (Canada)

2011-07-01

Alberta Innovates Technology Futures (AITF) is a 600 employee company created in 2010 and owned by the Alberta government; offices are located in Edmonton, Devon, Vegreville and Calgary. The purpose of this document is to present the services provided by AITF. The company provides technical support and advisory services as well as commercialization support, they provide the link between the concept stage and the commercialization stage. AITF proposes collaborative programs which can be consortia made up of a series of projects on general industry issues or joint industry projects which focus on a specific issue. During this presentation, a joint industry project, the fuels and lubricants exchange program, was presented along with several consortia such as the carbonate research program, the materials and reliability in oil sands program, and the AACI program. This presentation highlighted the work carried out by AITF to meet the needs of their clients.

76 FR 39018 - Commercial Driver's License Testing and Commercial Learner's Permit Standards; Corrections

Science.gov (United States)

2011-07-05

... [Docket No. FMCSA-2007-27659] RIN 2126-AB02 Commercial Driver's License Testing and Commercial Learner's..., 2011, that will be effective on July 8, 2011. This final rule amends the commercial driver's license... to issue the commercial learner's permit (CLP). Since the final rule was published, FMCSA identified...

U.S. Department of Energy Commercial Reference Building Models of the National Building Stock

Energy Technology Data Exchange (ETDEWEB)

Deru, M.; Field, K.; Studer, D.; Benne, K.; Griffith, B.; Torcellini, P.; Liu, B.; Halverson, M.; Winiarski, D.; Rosenberg, M.; Yazdanian, M.; Huang, J.; Crawley, D.

2011-02-01

The U.S. Department of Energy (DOE) Building Technologies Program has set the aggressive goal of producing marketable net-zero energy buildings by 2025. This goal will require collaboration between the DOE laboratories and the building industry. We developed standard or reference energy models for the most common commercial buildings to serve as starting points for energy efficiency research. These models represent fairly realistic buildings and typical construction practices. Fifteen commercial building types and one multifamily residential building were determined by consensus between DOE, the National Renewable Energy Laboratory, Pacific Northwest National Laboratory, and Lawrence Berkeley National Laboratory, and represent approximately two-thirds of the commercial building stock.

Development and validation of bonded composite doubler repairs for commercial aircraft.

Energy Technology Data Exchange (ETDEWEB)

Roach, Dennis Patrick; Rackow, Kirk A.

2007-07-01

A typical aircraft can experience over 2,000 fatigue cycles (cabin pressurizations) and even greater flight hours in a single year. An unavoidable by-product of aircraft use is that crack, impact, and corrosion flaws develop throughout the aircraft's skin and substructure elements. Economic barriers to the purchase of new aircraft have placed even greater demands on efficient and safe repair methods. The use of bonded composite doublers offers the airframe manufacturers and aircraft maintenance facilities a cost effective method to safely extend the lives of their aircraft. Instead of riveting multiple steel or aluminum plates to facilitate an aircraft repair, it is now possible to bond a single Boron-Epoxy composite doubler to the damaged structure. The FAA's Airworthiness Assurance Center at Sandia National Labs (AANC), Boeing, and Federal Express completed a pilot program to validate and introduce composite doubler repair technology to the U.S. commercial aircraft industry. This project focused on repair of DC-10 fuselage structure and its primary goal was to demonstrate routine use of this repair technology using niche applications that streamline the design-to-installation process. As composite doubler repairs gradually appear in the commercial aircraft arena, successful flight operation data is being accumulated. These commercial aircraft repairs are not only demonstrating the engineering and economic advantages of composite doubler technology but they are also establishing the ability of commercial maintenance depots to safely adopt this repair technique. This report presents the array of engineering activities that were completed in order to make this technology available for widespread commercial aircraft use. Focused laboratory testing was conducted to compliment the field data and to address specific issues regarding damage tolerance and flaw growth in composite doubler repairs. Fatigue and strength tests were performed on a simulated wing

Kidney Length in Normal Korean Children

International Nuclear Information System (INIS)

Kim, In One; Cheon, Jung Eun; Lee, Young Seok; Lee, Sun Wha; Kim, Ok Hwa; Kim, Ji Hye; Kim, Hong Dae; Sim, Jung Suk

2010-01-01

Renal length offers important information to detect or follow-up various renal diseases. The purpose of this study was to determine the kidney length of normal Korean children in relation to age, height, weight, body surface area (BSA), and body mass index (BMI). Children between 1 month and 15 years of age without urological abnormality were recruited. Children below 3rd percentile and over 97th percentile for height or weight were excluded. Both renal lengths were measured in the prone position three times and then averaged by experienced radiologists. The mean length and standard deviation for each age group was obtained, and regression equation was calculated between renal length and age, weight, height, BSA, and BMI, respectively. Renal length was measured in 550 children. Renal length grows rapidly until 24 month, while the growth rate is reduced thereafter. The regression equation for age is: renal length (mm) = 45.953 + 1.064 x age (month, ≤ 24 months) (R2 = 0.720) or 62.173 + 0.203 x age (months, > 24 months) (R2 = 0.711). The regression equation for height is: renal length (mm) = 24.494 + 0.457 x height (cm) (R2 = 0.894). The regression equation for weight is: renal length (mm) = 38.342 + 2.117 x weight (kg, ≤18 kg) (R2 = 0.852) or 64.498 + 0.646 x weight (kg, > 18 kg) (R2 = 0.651). The regression equation for BSA is: renal length (mm) = 31.622 + 61.363 x BSA (m2, ≤ 0.7) (R2 = 0.857) or 52.717 + 29.959 x BSA (m2, > 0.7) (R2 = 0.715). The regression equation for BMI is: renal length (mm) = 44.474 + 1.163 x BMI (R2 = 0.079). This study provides data on the normal renal length and its association with age, weight, height, BSA and BMI. The results of this study will guide the detection and follow-up of renal diseases in Korean children

Croatian fan scene: Football in television beer commercials

Directory of Open Access Journals (Sweden)

Biti Ozren

2016-01-01

Full Text Available In this paper attention is given to the mutual synergy between sports, commercials and alcohol. Therefore, we approach the research topic specified in the title with regards to the cultural history of football and beer, the functioning of the commercial industry within consumer culture and the structural practices of consuming football and beer trough which, at specific places and in special occasions, masculinity is performed. This research relies primarily on discourse analysis of football-beer commercials. For the purpose of enriching the insights gained by this method, a semi-structured interview was conducted with a market expert specialized in branding and an autoethnographic approach is present. The central part of the study is based on a corpus of advertisements that were broadcast on national television programs in the last ten years and that have emerged as part of a market designed advertising campaigns for major breweries during the World and European football championships. For the most of them, the common denominator is putting football fans in the forefront, whether in stadiums, bars, town squares or at home. Also, in most cases, they exclusively present male protagonists during their leisure time, united by their passion for football and beer, as well as their desire for relaxed socialization and fun. Apart from gender, the national context is essential, since these commercials usually visually, audibly and textually refer to the national football team of Croatia.

The comparison between the length of vertical dimension of occlusion and the length of thumb on undergraduate Mongoloid students

Directory of Open Access Journals (Sweden)

Goh Li Teng

2011-03-01

Full Text Available The Thumb Rule of Leonardo da Vinci states that many proportions of the face show relationship with the length of thumb which is measured from the proximal tip of the proximal phalanx to the distal tip of the distal phalanx. Previous studies have shown that the length of the vertical dimension of occlusion (VDO is similar to the length of thumb of the Caucasoid race. The purpose of this study is to determine whether the length of VDO have correlations with the length of thumb among those of the Mongoloid race. This study took a survey method with the analytical cross-sectional approach. A total of 80 students of Faculty of Dentistry who have fulfilled all population criteria were randomly chosen to measure the length of VDO and the length of the thumb. Results analyzed with Student's t-test statistic revealed that there was a significant difference between males and females in the length of VDO and the length of the thumb, however, there was no significant difference between the length of VDO and the length of the thumb. There were very strong correlations (P<0.05 between the length of VDO and the length of the thumb. As a conclusion, the length of thumb can be suggested as an objective method to determine the length of VDO in this population.

Surplus Facilities Management Program

International Nuclear Information System (INIS)

Coobs, J.H.

1983-01-01

This is the second of two programs that are concerned with the management of surplus facilities. The facilities in this program are those related to commercial activities, which include the three surplus experimental and test reactors [(MSRE, HRE-2, and the Low Intensity Test Reactor (LITR)] and seven experimental loops at the ORR. The program is an integral part of the Surplus Facilities Management Program, which is a national program administered for DOE by the Richland Operations Office. Very briefly reported here are routine surveillance and maintenance of surplus radioactively contaminated DOE facilities awaiting decommissioning

Commercial objectives, technology transfer, and systems analysis for fusion power development

Science.gov (United States)

Dean, Stephen O.

1988-03-01

Fusion is an essentially inexhaustible source of energy that has the potential for economically attractive commercial applications with excellent safety and environmental characteristics. The primary focus for the fusion-energy development program is the generation of centralstation electricity. Fusion has the potential, however, for many other applications. The fact that a large fraction of the energy released in a DT fusion reaction is carried by high-energy neutrons suggests potentially unique applications. These include breeding of fissile fuels, production of hydrogen and other chemical products, transmutation or “burning” of various nuclear or chemical wastes, radiation processing of materials, production of radioisotopes, food preservation, medical diagnosis and medical treatment, and space power and space propulsion. In addition, fusion R&D will lead to new products and new markets. Each fusion application must meet certain standards of economic and safety and environmental attractiveness. For this reason, economics on the one hand, and safety and environment and licensing on the other hand, are the two primary criteria for setting long-range commercial fusion objectives. A major function of systems analysis is to evaluate the potential of fusion against these objectives and to help guide the fusion R&D program toward practical applications. The transfer of fusion technology and skills from the national laboratories and universities to industry is the key to achieving the long-range objective of commercial fusion applications.

DSM Pocket Guidebook: Commercial technologies

International Nuclear Information System (INIS)

1992-08-01

It has been estimated that if electricity were used more efficiently with commercially available end-use technologies, 24%endash 44% of the nation's current demand for electricity could be eliminated. Almost all major electric utilities in the west are investigating such demand-side management (9DSM) opportunities. In some service territories, for example, improved efficiency could soon produce as much power as that from new coal-fired plants and produce it at a lower cost. Even utilities that currently have excess capacity are finding that DSM offers an opportunity to build efficient end-use stock to help them meet their future load shape objectives. Utility DSM programs typically consist of several measures designed to modify the utility's load shape (for example, innovative rate structures, direct utility control of loads, promotion of energy-efficient technologies, and customer education). The coordinated implementation of such measures requires planning, analysis of options, engineering, marketing, monitoring, and other coordination activities (Figure P1). This guidebook addresses one facet of an overall DSM program: selectrion of end-use technologies within the electrical utilities

COMMERCIAL SUPERSONIC TRANSPORT PROGRAM. PHASE II-C REPORT. HIGH STRENGTH STEEL EVALUATION FOR SUPERSONIC AIRCRAFT.

Science.gov (United States)

JET TRANSPORT AIRCRAFT, *AIRFRAMES, SUPERSONIC AIRCRAFT, STEEL , STRUCTURAL PROPERTIES, FRACTURE(MECHANICS), FATIGUE(MECHANICS), STRESS CORROSION...MICROPHOTOGRAPHY, HIGH TEMPERATURE, NICKEL ALLOYS, COBALT ALLOYS, CARBON, BAINITE , COMMERCIAL AIRCRAFT.

Genetic Diversity in Commercial Rapeseed (Brassica napus L.) Varieties from Turkey as Revealed by RAPD

OpenAIRE

Özlem ÖZBEK; Betül Uçar GIDIK

2013-01-01

In cultivated commercial crop species, genetic diversity tends to decrease because of the extensive breeding processes. Therefore, germplasm of commercial crop species, such as Brassica napus L. should be evaluated and the genotypes, which have higher genetic diversity index, should be addressed as potential parental cross materials in breeding programs. In this study, the genetic diversity was analysed by using randomly amplified polymorphic DNA analysis (RAPD) technique in nine Turkish com...

Alternative Fuel and Advanced Technology Commercial Lawn Equipment

Energy Technology Data Exchange (ETDEWEB)

None

2014-10-10

The U.S. Department of Energy's Clean Cities program produced this guide to help inform the commercial mowing industry about product options and potential benefits. This guide provides information about equipment powered by propane, ethanol, compressed natural gas, biodiesel, and electricity, as well as advanced engine technology. In addition to providing an overview for organizations considering alternative fuel lawn equipment, this guide may also be helpful for organizations that want to consider using additional alternative fueled equipment.

76 FR 71343 - Ethics, Independence, Arm's-Length Role, Ex Parte Communications and Open Government

Science.gov (United States)

2011-11-17

... FARM CREDIT ADMINISTRATION [FCA-PS-81; NV 11-25] Ethics, Independence, Arm's-Length Role, Ex Parte...) and the public. The FCA Board also is committed to the ethics principles and laws governing all Executive Branch employees and to the Agency's strong ethics program. DATES: Effective Date: November 7...

Virale commercials: de consument als marketeer. Onderzoek naar de redenen waarom consumenten virale commercials doorsturen: hun motieven, de inhoudskenmerken van viral commercials en de mediumcontext waarin virale commercials verschijnen

NARCIS (Netherlands)

Ketelaar, P.E.; Lucassen, P.; Kregting, G.H.J.

2010-01-01

Research into the reasons why consumers pass along viral commercials: their motives, the content characteristics of viral commercials and the medium context in which viral commercials appear. Based on the uses and gratifications perspective this study has determined which motives of consumers,

Commercial Application of In-Space Assembly

Science.gov (United States)

Lymer, John; Hanson, Mark; Tadros, Al; Boccio, Joel; Hollenstein, Bruno; Emerick, Ken; Doughtery, Sean; Doggett, Bill; Dorsey, John T.; King, Bruce D.;

Public R and D and commercialization of energy-efficient technology: A case study of Japanese projects

Energy Technology Data Exchange (ETDEWEB)

Kimura, Osamu, E-mail: o-kimura@criepi.denken.or.j [Central Research Institute of Electric Power Industry, 2-11-1 Iwatokita, Komae City, 201-8511 Tokyo (Japan)

2010-11-15

Are public R and D programs really effective in developing innovative technologies? How many technologies developed in these programs have been successfully commercialized? What are the key factors for successful commercialization and diffusion in the market? This paper tries to answer these questions by examining the Japanese experience of public R and D in demand-side energy efficiency, focusing on two major projects conducted in the 1980s and 1990s. It is found that of the 34 technologies developed in the two projects, only seven have been commercialized so far, four of those seven have only a very limited number of installations, and only one has a growing market. The results show that, while public R and D investments have a high risk of failure, they can bring new technologies to the market after a certain lead time. In addition, several factors resulting in the success or failure of commercialization/diffusion are identified, such as long-term R and D support by the government, a marketing strategy to respond to and influence market demand, and combination of R and D and deployment policy.

Public R and D and commercialization of energy-efficient technology. A case study of Japanese projects

Energy Technology Data Exchange (ETDEWEB)

Kimura, Osamu [Central Research Institute of Electric Power Industry, 2-11-1 Iwatokita, Komae City, 201-8511 Tokyo (Japan)

2010-11-15

Are public R and D programs really effective in developing innovative technologies? How many technologies developed in these programs have been successfully commercialized? What are the key factors for successful commercialization and diffusion in the market? This paper tries to answer these questions by examining the Japanese experience of public R and D in demand-side energy efficiency, focusing on two major projects conducted in the 1980s and 1990s. It is found that of the 34 technologies developed in the two projects, only seven have been commercialized so far, four of those seven have only a very limited number of installations, and only one has a growing market. The results show that, while public R and D investments have a high risk of failure, they can bring new technologies to the market after a certain lead time. In addition, several factors resulting in the success or failure of commercialization/diffusion are identified, such as long-term R and D support by the government, a marketing strategy to respond to and influence market demand, and combination of R and D and deployment policy. (author)

Public R and D and commercialization of energy-efficient technology: A case study of Japanese projects

International Nuclear Information System (INIS)

Kimura, Osamu

2010-01-01

Are public R and D programs really effective in developing innovative technologies? How many technologies developed in these programs have been successfully commercialized? What are the key factors for successful commercialization and diffusion in the market? This paper tries to answer these questions by examining the Japanese experience of public R and D in demand-side energy efficiency, focusing on two major projects conducted in the 1980s and 1990s. It is found that of the 34 technologies developed in the two projects, only seven have been commercialized so far, four of those seven have only a very limited number of installations, and only one has a growing market. The results show that, while public R and D investments have a high risk of failure, they can bring new technologies to the market after a certain lead time. In addition, several factors resulting in the success or failure of commercialization/diffusion are identified, such as long-term R and D support by the government, a marketing strategy to respond to and influence market demand, and combination of R and D and deployment policy.

Implementation of a low-cost, commercial orbit determination system

Science.gov (United States)

Corrigan, Jim

1994-01-01

Traditional satellite and launch control systems have consisted of custom solutions requiring significant development and maintenance costs. These systems have typically been designed to support specific program requirements and are expensive to modify and augment after delivery. The expanding role of space in today's marketplace combined with the increased sophistication and capabilities of modern satellites has created a need for more efficient, lower cost solutions to complete command and control systems. Recent technical advances have resulted in commercial-off-the-shelf products which greatly reduce the complete life-cycle costs associated with satellite launch and control system procurements. System integrators and spacecraft operators have, however, been slow to integrate these commercial based solutions into a comprehensive command and control system. This is due, in part, to a resistance to change and the fact that many available products are unable to effectively communicate with other commercial products. The United States Air Force, responsible for the health and safety of over 84 satellites via its Air Force Satellite Control Network (AFSCN), has embarked on an initiative to prove that commercial products can be used effectively to form a comprehensive command and control system. The initial version of this system is being installed at the Air Force's Center for Research Support (CERES) located at the National Test Facility in Colorado Springs, Colorado. The first stage of this initiative involved the identification of commercial products capable of satisfying each functional element of a command and control system. A significant requirement in this product selection criteria was flexibility and ability to integrate with other available commercial products. This paper discusses the functions and capabilities of the product selected to provide orbit determination functions for this comprehensive command and control system.

Economic feasibility prediction of the commercial fuel cells

International Nuclear Information System (INIS)

Ma Yan; Karady, George G.; Winston, Anthony; Gilbert, Palomino; Hess, Robert; Pelley, Don

2009-01-01

This paper presents a prediction method and corresponding Visual Basic program to evaluate the economic feasibility of the commercial fuel cells in utility systems. The economic feasibility of a fuel cell is defined as having a net present value (NPV) greater than zero. The basic process of the method is to combine fuel cell specifications and real energy market data to calculate yearly earning and cost for obtaining the NPV of fuel cells. The Fuel Cell Analysis Software was developed using Visual Basic based on the proposed method. The investigation of a 250 kW molten carbonate fuel cell (FuelCell Energy DFC300A) predicted that, for application specifically in Arizona, United States, no profit would result from the installation of this fuel cell. The analysis results indicated that the efficiency, investment cost, and operation cost are three key factors affecting potential feasibility of the commercial fuel cells

Cost effective nuclear commercial grade dedication

International Nuclear Information System (INIS)

Maletz, J.J.; Marston, M.J.

1991-01-01

This paper describes a new computerized database method to create/edit/view specification technical data sheets (mini-specifications) for procurement of spare parts for nuclear facility maintenance and to develop information that could support possible future facility life extension efforts. This method may reduce cost when compared with current manual methods. The use of standardized technical data sheets (mini-specifications) for items of the same category improves efficiency. This method can be used for a variety of tasks, including: Nuclear safety-related procurement; Non-safety related procurement; Commercial grade item procurement/dedication; Evaluation of replacement items. This program will assist the nuclear facility in upgrading its procurement activities consistent with the recent NUMARC Procurement Initiative. Proper utilization of the program will assist the user in assuring that the procured items are correct for the applications, provide data to assist in detecting fraudulent materials, minimize human error in withdrawing database information, improve data retrievability, improve traceability, and reduce long-term procurement costs

Environmental monitoring report for commercial low-level radioactive waste disposal sites (1960`s through 1990`s)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

During the time period covered in this report (1960`s through early 1990`s), six commercial low-level radioactive waste (LLRW) disposal facilities have been operated in the US. This report provides environmental monitoring data collected at each site. The report summarizes: (1) each site`s general design, (2) each site`s inventory, (3) the environmental monitoring program for each site and the data obtained as the program has evolved, and (4) what the program has indicated about releases to off-site areas, if any, including a statement of the actual health and safety significance of any release. A summary with conclusions is provided at the end of each site`s chapter. The six commercial LLRW disposal sites discussed are located near: Sheffield, Illinois; Maxey Flats, Kentucky; Beatty, Nevada; West Valley, New York; Barnwell, South Carolina; Richland, Washington.

Intraflagellar transport particle size scales inversely with flagellar length: revisiting the balance-point length control model.

Science.gov (United States)

Engel, Benjamin D; Ludington, William B; Marshall, Wallace F

2009-10-05

The assembly and maintenance of eukaryotic flagella are regulated by intraflagellar transport (IFT), the bidirectional traffic of IFT particles (recently renamed IFT trains) within the flagellum. We previously proposed the balance-point length control model, which predicted that the frequency of train transport should decrease as a function of flagellar length, thus modulating the length-dependent flagellar assembly rate. However, this model was challenged by the differential interference contrast microscopy observation that IFT frequency is length independent. Using total internal reflection fluorescence microscopy to quantify protein traffic during the regeneration of Chlamydomonas reinhardtii flagella, we determined that anterograde IFT trains in short flagella are composed of more kinesin-associated protein and IFT27 proteins than trains in long flagella. This length-dependent remodeling of train size is consistent with the kinetics of flagellar regeneration and supports a revised balance-point model of flagellar length control in which the size of anterograde IFT trains tunes the rate of flagellar assembly.

Commercials in the Classroom: A Content Analysis of "Channel One" Advertisements.

Science.gov (United States)

Wulfemeyer, K. Tim; Mueller, Barbara

"Channel One" is a 12-minute daily TV news program designed specifically to be broadcast to high schools. A study examined critically the content of "Channel One" commercials to determine the values, themes, formats, and appeals used to pitch products to students, with special emphasis placed on the values used and promoted in…

Commercialization of the global nuclear energy partnership (GNEP)

International Nuclear Information System (INIS)

Loewen Eric P.; Boaz, Jeffery; Saito, Earl; Boardman, Chuck

2007-01-01

In February 2006 President Bush announced the Advanced Energy Initiative, which included the Department of Energy's (DOE) Global Nuclear Energy Partnership (GNEP). GNEP has seven broad goals, one of the major elements being to develop and deploy advanced nuclear fuel recycling technology. DOE is contemplating accelerating the deployment of these technologies to achieve the construction of a commercial scale application of these technologies. DOE now defines this approach as 'two simultaneous tracks: (1) deployment of commercial scale facilities for which advanced technologies are available now or in the near future, and (2) further research and development of transmutation fuels technologies'. GE believes an integrated technical solution, using existing reactor and fuel reprocessing technologies, is achievable in the near term to accelerate the commercial demonstration of GNEP infrastructure. The concept involves a single, integrated, commercial scale, recycling facility consisting of the Consolidated Fuel Treatment Center (CFTC), capable of processing LWR and fast reactor Spent Nuclear Fuel (SNF) and fabricating Advanced Recycling Reactor (ARR) actinide fuel. The integrated facility would include a fast reactor that uses actinide-bearing fuel to produce electricity. For optimal performance, GE believes this integrated facility should be co-located to eliminate transportation between the CFTC and ARR, and enhance proliferation resistance. This Advanced Recycling Center takes advantage of previous investments by government and industry in fast reactor technology research and development. To allow for commercial acceptance, a prototypical demonstration reactor and associated fuel cycle facility will be constructed, tested, and licensed. Taking advantage of GE's NRC-reviewed modular sodium-cooled PRISM reactor, only a single reactor will be needed and the cost and risk minimized in the initial phase of the program. This paper outlines a process and a schedule to

Can sedentary behavior be made more active? A randomized pilot study of TV commercial stepping versus walking

Directory of Open Access Journals (Sweden)

Steeves Jeremy A

2012-08-01

Full Text Available Abstract Background There is a growing problem of physical inactivity in America, and approximately a quarter of the population report being completely sedentary during their leisure time. In the U.S., TV viewing is the most common leisure-time activity. Stepping in place during TV commercials (TV Commercial Stepping could increase physical activity. The purpose of this study was to examine the feasibility of incorporating physical activity (PA into a traditionally sedentary activity, by comparing TV Commercial Stepping during 90 min/d of TV programming to traditional exercise (Walking. Methods A randomized controlled pilot study of the impact of 6 months of TV Commercial Stepping versus Walking 30 min/day in adults was conducted. 58 sedentary, overweight (body mass index 33.5 ± 4.8 kg/m2 adults (age 52.0 ± 8.6 y were randomly assigned to one of two 6-mo behavioral PA programs: 1 TV Commercial Stepping; or 2 Walking 30 min/day. To help facilitate behavior changes participants received 6 monthly phone calls, attended monthly meetings for the first 3 months, and received monthly newsletters for the last 3 months. Using intent-to-treat analysis, changes in daily steps, TV viewing, diet, body weight, waist and hip circumference, and percent fat were compared at baseline, 3, and 6 mo. Data were collected in 2010–2011, and analyzed in 2011. Results Of the 58 subjects, 47 (81% were retained for follow-up at the completion of the 6-mo program. From baseline to 6-mo, both groups significantly increased their daily steps [4611 ± 1553 steps/d vs. 7605 ± 2471 steps/d (TV Commercial Stepping; 4909 ± 1335 steps/d vs. 7865 ± 1939 steps/d (Walking; P  Conclusions Participants in both the TV Commercial Stepping and Walking groups had favorable changes in daily steps, TV viewing, diet, and anthropometrics. PA can be performed while viewing TV commercials and this may be a feasible alternative to traditional approaches for

16 CFR 308.2 - Definitions.

Science.gov (United States)

2010-01-01

... with the use of the service, including the service provider's name and address, a business telephone.... (f) Program-length commercial means any commercial or other advertisement fifteen (15) minutes in..., and, in any event, at least the same audible level as that principally used in the advertisement or...

Grid-Competitive Residential and Commercial Fully Automated PV Systems Technology: Final technical Report, August 2011

Energy Technology Data Exchange (ETDEWEB)

Brown, Katie E.; Cousins, Peter; Culligan, Matt; Jonathan Botkin; DeGraaff, David; Bunea, Gabriella; Rose, Douglas; Bourne, Ben; Koehler, Oliver

2011-08-26

Under DOE's Technology Pathway Partnership program, SunPower Corporation developed turn-key, high-efficiency residential and commercial systems that are cost effective. Key program objectives include a reduction in LCOE values to 9-12 cents/kWh and 13-18 cents/kWh respectively for the commercial and residential markets. Target LCOE values for the commercial ground, commercial roof, and residential markets are 10, 11, and 13 cents/kWh. For this effort, SunPower collaborated with a variety of suppliers and partners to complete the tasks below. Subcontractors included: Solaicx, SiGen, Ribbon Technology, Dow Corning, Xantrex, Tigo Energy, and Solar Bridge. SunPower's TPP addressed nearly the complete PV value chain: from ingot growth through system deployment. Throughout the award period of performance, SunPower has made progress toward achieving these reduced costs through the development of 20%+ efficient modules, increased cell efficiency through the understanding of loss mechanisms and improved manufacturing technologies, novel module development, automated design tools and techniques, and reduced system development and installation time. Based on an LCOE assessment using NREL's Solar Advisor Model, SunPower achieved the 2010 target range, as well as progress toward 2015 targets.

Genotype × Sex Interaction Effects on Carcass Traits of Three Strains of Commercial Broiler Chickens

OpenAIRE

S.O. OLAWUMI; S.O. FAJEMILEHIN; S.S. FAGBUARO

2012-01-01

The aim of this study was to rank commercial broiler chicken breeds vis-à-vis their sexes based on their carcass evaluation at 56days of age. The strains were Marshall, Arbor Acre and Hubbard, and the traits considered were live weight, dressing weight and percent, eviscerated weight, carcass weight and percent, breast muscle, back muscle, thigh, drumstick, head, neck, wing and leg weights. Other traits measured were wing and leg lengths, edible giblets and abdominal fat. There ...

International Commercial Remote Sensing Practices and Policies: A Comparative Analysis

Science.gov (United States)

Stryker, Timothy

In recent years, there has been much discussion about U.S. commercial remoteUnder the Act, the Secretary of Commerce sensing policies and how effectively theylicenses the operations of private U.S. address U.S. national security, foreignremote sensing satellite systems, in policy, commercial, and public interests.consultation with the Secretaries of Defense, This paper will provide an overview of U.S.State, and Interior. PDD-23 provided further commercial remote sensing laws,details concerning the operation of advanced regulations, and policies, and describe recentsystems, as well as criteria for the export of NOAA initiatives. It will also addressturnkey systems and/or components. In July related foreign practices, and the overall2000, pursuant to the authority delegated to legal context for trade and investment in thisit by the Secretary of Commerce, NOAA critical industry.iss ued new regulations for the industry. Licensing and Regulationsatellite systems. NOAA's program is The 1992 Land Remote Sensing Policy Act ("the Act"), and the 1994 policy on Foreign Access to Remote Sensing Space Capabilities (known as Presidential Decision Directive-23, or PDD-23) put into place an ambitious legal and policy framework for the U.S. Government's licensing of privately-owned, high-resolution satellite systems. Previously, capabilities afforded national security and observes the international obligations of the United States; maintain positive control of spacecraft operations; maintain a tasking record in conjunction with other record-keeping requirements; provide U.S. Government access to and use of data when required for national security or foreign policy purposes; provide for U.S. Government review of all significant foreign agreements; obtain U.S. Government approval for any encryption devices used; make available unenhanced data to a "sensed state" as soon as such data are available and on reasonable cost terms and conditions; make available unenhanced data as requested

Clean Coal Technology Programs: Program Update 2009

Energy Technology Data Exchange (ETDEWEB)

None

2009-10-01

The purpose of the Clean Coal Technology Programs: Program Update 2009 is to provide an updated status of the U.S. Department of Energy (DOE) commercial-scale demonstrations of clean coal technologies (CCT). These demonstrations have been performed under the Clean Coal Technology Demonstration Program (CCTDP), the Power Plant Improvement Initiative (PPII), and the Clean Coal Power Initiative (CCPI). Program Update 2009 provides: (1) a discussion of the role of clean coal technology demonstrations in improving the nation’s energy security and reliability, while protecting the environment using the nation’s most abundant energy resource—coal; (2) a summary of the funding and costs of the demonstrations; and (3) an overview of the technologies being demonstrated, along with fact sheets for projects that are active, recently completed, or recently discontinued.

Controlling the optical path length in turbid media using differential path-length spectroscopy: fiber diameter dependence

NARCIS (Netherlands)

Kaspers, O. P.; Sterenborg, H. J. C. M.; Amelink, A.

2008-01-01

We have characterized the path length for the differential path-length spectroscopy (DPS) fiber optic geometry for a wide range of optical properties and for fiber diameters ranging from 200 mu m to 1000 mu m. Phantom measurements show that the path length is nearly constant for scattering

The commercial health insurance industry in an era of eroding employer coverage.

Science.gov (United States)

Robinson, James C

2006-01-01

This paper analyzes the commercial health insurance industry in an era of weakening employer commitment to providing coverage and strengthening interest by public programs to offer coverage through private plans. It documents the willingness of the industry to accept erosion of employment-based enrollment rather than to sacrifice earnings, the movement of Medicaid beneficiaries into managed care, and the distribution of market shares in the employment-based, Medicaid, and Medicare markets. The profitability of the commercial health insurance industry, exceptionally strong over the past five years, will henceforth be linked to the budgetary cycles and political fluctuations of state and federal governments.

Judicial Reform and Commercial Justice : The Experience of Tanzania's Commercial Court

OpenAIRE

Finnegan, David Louis

2004-01-01

Policymakers in developing and transition economies recognize the important role played by judiciaries in creating an institutional environment conducive to robust private sector activity. In the case of Tanzania, the government, with the support of local business groups, international investors, and the donor community, created a specialized court dedicated to considering and resolving commercial and financial cases. The Commercial Division of the High Court of Tanzania (the "Commercial Cour...

A simple clockless Network-on-Chip for a commercial audio DSP chip

DEFF Research Database (Denmark)

Stensgaard, Mikkel Bystrup; Bjerregaard, Tobias; Sparsø, Jens

2006-01-01

We design a very small, packet-switched, clockless Network-on-Chip (NoC) as a replacement for the existing crossbar-based communication infrastructure in a commercial audio DSP chip. Both solutions are laid out in a 0.18 um process, and compared in terms of area, power consumption and routing...... to the existing crossbar, it allows all blocks to communicate. The total wire length is decreased by 22% which eases the layout process and makes the design less prone to routing congestion. Not least, the communicating blocks are decoupled by means of the NoC, providing a Globally-Asynchronous, Locally...

Sponsored Schools and Commercialized Classrooms: Schoolhouse Commercializing Trends in the 1990's.

Science.gov (United States)

Molnar, Alex

This report analyzes commercializing trends in America's schools and classrooms, using data from database searches in seven categories of schoolhouse commercialism in the period 1990-97. The number of citations relating to commercializing activities can provide only a rough approximation of the scope and development of the phenomenon. The number…

Comparison of open-source linear programming solvers.

Energy Technology Data Exchange (ETDEWEB)

Gearhart, Jared Lee; Adair, Kristin Lynn; Durfee, Justin David.; Jones, Katherine A.; Martin, Nathaniel; Detry, Richard Joseph

2013-10-01

When developing linear programming models, issues such as budget limitations, customer requirements, or licensing may preclude the use of commercial linear programming solvers. In such cases, one option is to use an open-source linear programming solver. A survey of linear programming tools was conducted to identify potential open-source solvers. From this survey, four open-source solvers were tested using a collection of linear programming test problems and the results were compared to IBM ILOG CPLEX Optimizer (CPLEX) [1], an industry standard. The solvers considered were: COIN-OR Linear Programming (CLP) [2], [3], GNU Linear Programming Kit (GLPK) [4], lp_solve [5] and Modular In-core Nonlinear Optimization System (MINOS) [6]. As no open-source solver outperforms CPLEX, this study demonstrates the power of commercial linear programming software. CLP was found to be the top performing open-source solver considered in terms of capability and speed. GLPK also performed well but cannot match the speed of CLP or CPLEX. lp_solve and MINOS were considerably slower and encountered issues when solving several test problems.

The length of the male urethra

Directory of Open Access Journals (Sweden)

Tobias. S. Kohler

2008-08-01

Full Text Available PURPOSE: Catheter-based medical devices are an important component of the urologic armamentarium. To our knowledge, there is no population-based data regarding normal male urethral length. We evaluated the length of the urethra in men with normal genitourinary anatomy undergoing either Foley catheter removal or standard cystoscopy. MATERIALS AND METHODS: Male urethral length was obtained in 109 men. After study permission was obtained, the subject's penis was placed on a gentle stretch and the catheter was marked at the tip of the penis. The catheter was then removed and the distance from the mark to the beginning of the re-inflated balloon was measured. Alternatively, urethral length was measured at the time of cystoscopy, on removal of the cystoscope. Data on age, weight, and height was obtained in patients when possible. RESULTS: The mean urethral length was 22.3 cm with a standard deviation of 2.4 cm. Urethral length varied between 15 cm and 29 cm. No statistically significant correlation was found between urethral length and height, weight, body mass index (BMI, or age. CONCLUSIONS: Literature documenting the length of the normal male adult urethra is scarce. Our data adds to basic anatomic information of the male urethra and may be used to optimize genitourinary device design.

Short Rayleigh Length Free Electron Lasers

CERN Document Server

Crooker, P P; Armstead, R L; Blau, J

2004-01-01

Conventional free electron laser (FEL) oscillators minimize the optical mode volume around the electron beam in the undulator by making the resonator Rayleigh length about one third of the undulator length. This maximizes gain and beam-mode coupling. In compact configurations of high-power infrared FELs or moderate power UV FELs, the resulting optical intensity can damage the resonator mirrors. To increase the spot size and thereby reduce the optical intensity at the mirrors below the damage threshold, a shorter Rayleigh length can be used, but the FEL interaction is significantly altered. A new FEL interaction is described and analyzed with a Rayleigh length that is only one tenth the undulator length, or less. The effect of mirror vibration and positioning are more critical in the short Rayleigh length design, but we find that they are still within normal design tolerances.