WorldWideScience

Sample records for program flow chart

  1. Improving the implementation of pre-laboratory flow charts ...

    African Journals Online (AJOL)

    The aim of this research was to use different assessment methods by engaging all students in pre-laboratory flow charts with check lists by taking into account rather than giving a mark for attendance for their presence, based on principles of cooperative learning method by forming groups, promoting positive ...

  2. A Computer Program to Calculate Two-Stage Short-Run Control Chart Factors for (X,MR Charts

    Directory of Open Access Journals (Sweden)

    Matthew E. Elam

    2006-04-01

    Full Text Available This paper is the second in a series of two papers that fully develops two-stage short-run (X, MR control charts. This paper describes the development and execution of a computer program that accurately calculates first- and second-stage short-run control chart factors for (X, MR charts using the equations derived in the first paper. The software used is Mathcad. The program accepts values for number of subgroups, α for the X chart, and α for the MR chart both above the upper control limit and below the lower control limit. Tables are generated for specific values of these inputs and the implications of the results are discussed. A numerical example illustrates the use of the program.

  3. PLANIT Support and Utility Programs - Flow Charts

    Science.gov (United States)

    1976-05-01

    fli lNat > • • • • • ÜtMP • • ••••••••••• ,jun* rui ••••••••*••••••••«* ••■#••••••••••••■ tlllO», 9J/0»7H i.MAWS » il M>*l

  4. BASIC Language Flow Charting Program (BASCHART).

    Science.gov (United States)

    1982-11-01

    34B9P", "FC", " F5", I" IF6 ", "IF/", "F8" :DATA "F9","F1" 1080 REM 1090 RESTORE LINE 970 :FOR 1=1 TO 123 :READ Q’$(I) :NEXT I 1100 RESTORE LINE 1020 :FOR

  5. 23 CFR Appendix D to Subpart D of... - Equal Opportunity Compliance Review Process Flow Chart

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Equal Opportunity Compliance Review Process Flow Chart D..., Subpt. D, App. D Appendix D to Subpart D of Part 230—Equal Opportunity Compliance Review Process Flow Chart EC14OC91.004 ...

  6. Quality Control Charts in Large-Scale Assessment Programs

    Science.gov (United States)

    Schafer, William D.; Coverdale, Bradley J.; Luxenberg, Harlan; Jin, Ying

    2011-01-01

    There are relatively few examples of quantitative approaches to quality control in educational assessment and accountability contexts. Among the several techniques that are used in other fields, Shewart charts have been found in a few instances to be applicable in educational settings. This paper describes Shewart charts and gives examples of how…

  7. A Flow Chart of Behavior Management Strategies for Families of Children with Co-Occurring Attention-Deficit Hyperactivity Disorder and Conduct Problem Behavior.

    Science.gov (United States)

    Danforth, Jeffrey S

    2016-03-01

    Behavioral parent training is an evidence-based treatment for problem behavior described as attention-deficit hyperactivity disorder (ADHD), oppositional defiant disorder, and conduct disorder. However, adherence to treatment fidelity and parent performance of the management skills remains an obstacle to optimum outcome. One variable that may limit the effectiveness of the parent training is that demanding behavior management procedures can be deceptively complicated and difficult to perform. Based on outcome research for families of children with co-occurring ADHD and conduct problem behavior, an example of a visual behavior management flow chart is presented. The flow chart may be used to help teach specific behavior management skills to parents. The flow chart depicts a chain of behavior management strategies taught with explanation, modeling, and role-play with parents. The chained steps in the flow chart are elements common to well-known evidence-based behavior management strategies, and perhaps, this depiction well serve as a setting event for other behavior analysts to create flow charts for their own parent training, Details of the flow chart steps, as well as examples of specific applications and program modifications conclude.

  8. The sequential order of procedural instructions. Some formal methods for designers of flow charts

    NARCIS (Netherlands)

    Jansen, Carel J.M.; Steehouder, M.F.

    1996-01-01

    Document designers who present procedural instructions can choose several formats: prose, table, logical tree, or flow chart. In all cases, however, it is essential that the instructions are ordered in a way that allows users to reach the outcome in as little time as possible. In this article two

  9. Simple Acupoints Prescription Flow Chart Based on Meridian Theory: A Retrospective Study in 102 Dogs

    Directory of Open Access Journals (Sweden)

    Jong-Ho Jeong

    2013-01-01

    Full Text Available To help the clinicians prescribe acupoints easily and effectively, we developed one simple flow chart to select acupoints. This study aimed to evaluate the usefulness of flow chart to select acupoints in dogs. Total 102 dogs showing intervertebral disc disease (IVDD (n=12, vomiting (n=11, diarrhea (n=2, abdominal pain (n=5, cough (n=66, or epilepsy (n=6 received acupuncture treatment according to the chart, and its outcomes were evaluated as regards clinical symptoms, duration, treatment numbers, and recovery time. Dogs (8/8 with IVDD from grades I to III recovered over periods of 5 days to 6 weeks after 1–12 treatments, while 1/4 dogs with grade IV recovered over 7 weeks after 15 treatments. Vomiting dogs with acute/subacute (n=8 and chronic symptoms (n=3 required about 1 and 7 treatments to recover fully, respectively. All dogs (n=5 with abdominal pain showed fast relief within 24 hours after acupuncture. Two diarrhea cases recovered over 2–9 days after 1-2 treatments. Fifty-four of 66 coughing dogs were recovered by 1-2 treatments. And 5 of 6 epilepsy dogs under a regular acupuncture treatment had no epileptic episode during followup of 12 months. These results suggest that this flow chart can help the clinicians prescribe acupoints effectively.

  10. Umbilical venous catheters placement evaluation on frontal radiogram: application of a simplified flow-chart for radiology residents.

    Science.gov (United States)

    Salerno, Sergio; Tudisca, Chiara; Murmura, Elena; Matranga, Domenica; La Tona, Giuseppe; Lo Re, Giuseppe; Lo Casto, Antonio

    2017-05-01

    Umbilical Venous Catheter (UVC) are commonly used in neonatal period; they can be not correctly positioned and could be associated with complications. The purpose of this article is to suggest a flow-chart to evaluate the placement of UVC, testing it in young radiologists-in-training. We developed a simple flow-chart to asses, steps by step, UVC placement considering its course and tip location (ideally placed in the atriocaval junction). We tested the flow-chart impact asking to 20 residents to evaluate the placement of 10 UVC before and after they familiarized with the flow-chart and the anatomical findings of a newborn. The agreement among the 20 students was evaluated too. The number of correct characterizations was different due to the administration of the flow-chart. One hundred and six correct UVC assessments at the beginning switched to 196 after the administration of the flow-chart (p = 0.0001). The observed agreement among the twenty radiology residents was statistically significant, both before (kappa = 0.41, p < 0.001) and after (kappa = 0.37, p < 0.001) the flow-chart administration. The developed flow-chart demonstrated to be useful in increasing residents performance in UVC placement assessment.

  11. F-Chart handbook. Active solar system sizing and economic analysis program

    Science.gov (United States)

    Mielke, G. W.

    1981-04-01

    The program is applicable to active solar space and service water heating systems that incorporate typical flat-plate solar collectors. The program is based on the F-Chart method of estimating annual system thermal performance. This program uses a standard life-cycle cost analysis methodology to calculate optimum solar system size and present economic performance data. The F-Chart program is designed to be used by anyone interested in, or involved with, solar heating systems. This handbook describes both information input requirements and the resultant thermal and economic analyses.

  12. Flow simulation and efficiency hill chart prediction for a Propeller turbine

    Energy Technology Data Exchange (ETDEWEB)

    Vu, T C; Gauthier, M [Andritz Hydro Ltd. 6100 Transcanadienne, Pointe Claire, H9R 1B9 (Canada); Koller, M [Andritz Hydro AG Hardstrasse 319, 8021 Zuerich (Switzerland); Deschenes, C, E-mail: thi.vu@andritz.co, E-mail: maxime.gauthier@andritz.co [Laval University, Laboratory of Hydraulic Machinery (LAMH) 1065 Avenue de la Medecine, Quebec, G1V 0A6 (Canada)

    2010-08-15

    In the present paper, we focus on the flow computation of a low head Propeller turbine at a wide range of design and off-design operating conditions. First, we will present the results on the efficiency hill chart prediction of the Propeller turbine and discuss the consequences of using non-homologous blade geometries for the CFD simulation. The flow characteristics of the entire turbine will be also investigated and compared with experimental data at different measurement planes. Two operating conditions are selected, the first one at the best efficiency point and the second one at part load condition. At the same time, for the same selected operating points, the numerical results for the entire turbine simulation will be compared with flow simulation with our standard stage calculation approach which includes only guide vane, runner and draft tube geometries.

  13. Using Flow Charts to Visualize the Decision-Making Process in Space Weather Forecasting

    Science.gov (United States)

    Aung, M. T. Y.; Myat, T.; Zheng, Y.; Mays, M. L.; Ngwira, C.; Damas, M. C.

    2016-12-01

    Our society today relies heavily on technological systems such as satellites, navigation systems, power grids and aviation. These systems are very sensitive to space weather disturbances. When Earth-directed space weather driven by the Sun arrives at the Earth, it causes changes to the Earth's radiation environment and the magnetosphere. Strong disturbances in the magnetosphere of the Earth are responsible for geomagnetic storms that can last from hours to days depending on strength of storms. Geomagnetic storms can severely impact critical infrastructure on Earth, such as the electric power grid, and Solar Energetic Particles that can endanger life in outer space. How can we lessen these adverse effects? They can be lessened through the early warning signals sent by space weather forecasters before CME or high-speed stream arrives. A space weather forecaster's duty is to send predicted notifications to high-tech industries and NASA missions so that they could take extra measures for protection. NASA space weather forecasters make prediction decisions by following certain steps and processes from the time an event occurs at the sun all the way to the impact locations. However, there has never been a tool that helps these forecasters visualize the decision process until now. A flow chart is created to help forecasters visualize the decision process. This flow chart provides basic knowledge of space weather and can be used to train future space weather forecasters. It also helps to cut down the training period and increase consistency in forecasting. The flow chart is also a great reference for people who are already familiar with space weather.

  14. Structuring development process of learning knowledge and procedure in healthcare using the unit process flow chart.

    Science.gov (United States)

    Shimono, Ryoko; Tsuru, Satoko; Kato, Shogo; Narita, Shin; Munechika, Masahiko; Iizuka, Yoshinori

    2009-01-01

    Websites are effective in supplying knowledge and learning methods in healthcare and also in improving them. However, either a supplier of the knowledge or a supplier of the learning method based on the knowledge is not able to accumulate what they have learnt through the development. We developed a system to improve development processes of knowledge and of learning method by using the methodology of quality management. In the development, we introduced a concept of Unit Process and used the 'Unit Process Flow Chart' in order to structure a process.

  15. A method to improve a job process at a hospital using the "unit process flow chart".

    Science.gov (United States)

    Shimono, Ryoko; Tsuru, Satoko; Iizuka, Yoshinori; Kato, Shogo; Munechika, Masahiko; Kaneko, Masaaki

    2009-01-01

    The development of methods to improve the quality of services provided at hospitals has been essential owing to the inadequacy of arrangements for standard procedures and the inadequacy of work instructions based on such procedures. In this paper, we propose a method that involves the following steps: description of the job process, analysis of the causes of incidents, and the planning of improvements for the relevant job process. This method describes a healthcare process using a set of unit process flow charts (UPFCs), which are structured and standardized modules represented in the form of flow charts that elucidate the elements of jobs. Describing a job in this manner allows for an appropriate and in-depth analysis of the causes of incidents that occur during a job process, owing to the fact that the structure and description of the characteristics of relevant unit processes are properly designed. In this paper, we provide a detailed explanation of how this method was developed. Lastly, we apply the method to actual cases at a hospital to illustrate its effectiveness in comparison with the systems that are currently in place.

  16. Determination of Multiphase Flow Meter Reliability and Development of Correction Charts for the Prediction of Oilfield Fluid Flow Rates

    Directory of Open Access Journals (Sweden)

    Samuel S. MOFUNLEWI

    2008-06-01

    Full Text Available The aim of field testing of Multiphase Flow Meter (MPFM is to show whether its accuracy compares favourably with that of the Test Separator in accurately measuring the three production phases (oil, gas and water as well as determining meter reliability in field environment. This study evaluates field test results of the MPFM as compared to reference conventional test separators. Generally, results show that MPFM compares favourably with Test Separator within the specified range of accuracy.At the moment, there is no legislation for meter proving technique for MPFM. However, this study has developed calibration charts that can be used to correct and improve meter accuracy.

  17. Stability Analysis of High-Speed Boundary-Layer Flow with Gas Injection (Briefing Charts)

    Science.gov (United States)

    2014-06-01

    boundary-layer flow with gas injection 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER Alexander V. Fedorov ...Release; Distribution Unlimited Stability analysis of high-speed boundary-layer flow with gas injection Alexander Fedorov and Vitaly Soudakov Moscow...Dispersion relation from WKB analysis*,**: *Guschin, V.R., & Fedorov , A.V., Fluid Dynamics, Vol. 24, No.1, 1989 **Guschin, V.R., & Fedorov , A.V., NASA

  18. An Intelligent Vehicular Traffic Signal Control System with State Flow Chart Design and FPGA Prototyping

    Directory of Open Access Journals (Sweden)

    UMAIR SAEEDSOLANGI

    2017-04-01

    Full Text Available The problem of vehicular traffic congestion is a persistent constraint in the socio-economic development of Pakistan. This paper presents design and implementation of an intelligent traffic controller based on FPGA (Field Programmable Gate Array to provide an efficient traffic management by optimizing functioning of traffic lights which will result in minimizing traffic congestion at intersections. The existent Traffic Signal system in Pakistan is fixed-time based and offers only Open Loop method for Traffic Control. The Intelligent Traffic Controller presented here uses feedback sensors to read the Traffic density present at a four way intersection to provide an efficient alternative for better supervisory Control of Traffic flow. The traffic density based control logic has been developed in a State Flow Chart for improved visualization of State Machine based operation, and implemented as a Subsystem in Simulink and transferred into VHDL (Hardware Description Language code using HDL Coder for reducing development time and time to market, which are essential to capitalize Embedded Systems Market. The VHDL code is synthesized with Altera QUARTUS, simulated timing waveform is obtained to verify correctness of the algorithm for different Traffic Scenarios. For implementation purpose estimations were obtained for Cyclone-III and Stratix-III.

  19. Diagnosing diabetic foot infection: the role of imaging and a proposed flow chart for assessment.

    Science.gov (United States)

    Israel, O; Sconfienza, L M; Lipsky, B A

    2014-03-01

    Diabetes mellitus, a major current epidemic, is frequently complicated by foot infections that are associated with high morbidity. Diagnosing these infections, especially whether or not underlying bone is involved, poses clinical challenges, but is crucial to making proper decisions regarding therapeutic strategies. The most effective means of managing patients with a diabetic foot infection is within the framework of a multidisciplinary team. Present diagnostic efforts are aimed at developing better methods to differentiate uninfected from infected soft tissue wounds, to determine when bone infection is present, and to more clearly define when infection has resolved with treatment. Imaging studies play a major role in diagnosis. This usually begins with plain radiographs, but when advanced imaging is needed, magnetic resonance imaging (MRI) is considered the modality of choice. Newer techniques, such as molecular hybrid imaging, positron emission tomography (PET)/computed tomography (CT) and single photon emission (SPECT)/CT using various radiotracers, play an increasing role. These tests may redefine the non-invasive diagnostic work-up of diabetic foot wounds, potentially leading to substantial improvements in patient management. As experts in infectious diseases, radiology and nuclear medicine, we reviewed the available literature on diagnosing diabetic foot infections, especially the currently available imaging techniques, and developed a proposed diagnostic flow chart, for evaluating patients with a diabetic foot wound.

  20. Linear Programming and Network Flows

    CERN Document Server

    Bazaraa, Mokhtar S; Sherali, Hanif D

    2011-01-01

    The authoritative guide to modeling and solving complex problems with linear programming-extensively revised, expanded, and updated The only book to treat both linear programming techniques and network flows under one cover, Linear Programming and Network Flows, Fourth Edition has been completely updated with the latest developments on the topic. This new edition continues to successfully emphasize modeling concepts, the design and analysis of algorithms, and implementation strategies for problems in a variety of fields, including industrial engineering, management science, operations research

  1. Comparison of Onsite Versus Online Chart Reviews as Part of the American College of Radiation Oncology Accreditation Program.

    Science.gov (United States)

    Hepel, Jaroslaw T; Heron, Dwight E; Mundt, Arno J; Yashar, Catheryn; Feigenberg, Steven; Koltis, Gordon; Regine, William F; Prasad, Dheerendra; Patel, Shilpen; Sharma, Navesh; Hebert, Mary; Wallis, Norman; Kuettel, Michael

    2017-05-01

    Accreditation based on peer review of professional standards of care is essential in ensuring quality and safety in administration of radiation therapy. Traditionally, medical chart reviews have been performed by a physical onsite visit. The American College of Radiation Oncology Accreditation Program has remodeled its process whereby electronic charts are reviewed remotely. Twenty-eight radiation oncology practices undergoing accreditation had three charts per practice undergo both onsite and online review. Onsite review was performed by a single reviewer for each practice. Online review consisted of one or more disease site-specific reviewers for each practice. Onsite and online reviews were blinded and scored on a 100-point scale on the basis of 20 categories. A score of less than 75 was failing, and a score of 75 to 79 was marginal. Any failed charts underwent rereview by a disease site team leader. Eighty-four charts underwent both onsite and online review. The mean scores were 86.0 and 86.9 points for charts reviewed onsite and online, respectively. Comparison of onsite and online reviews revealed no statistical difference in chart scores ( P = .43). Of charts reviewed, 21% had a marginal (n = 8) or failing (n = 10) score. There was no difference in failing charts ( P = .48) or combined marginal and failing charts ( P = .13) comparing onsite and online reviews. The American College of Radiation Oncology accreditation process of online chart review results in comparable review scores and rate of failing scores compared with traditional on-site review. However, the modern online process holds less potential for bias by using multiple reviewers per practice and allows for greater oversight via disease site team leader rereview.

  2. The study of insect blood-feeding behaviour. 2. Recording techniques and the use of flow charts.

    Science.gov (United States)

    Smith, J J; Friend, W G

    1987-01-01

    This paper continues a discussion of approaches and methodologies we have used in our studies of feeding in haematophagous insects. Described are techniques for directly monitoring behaviour: electrical recording of feeding behaviour via resistance changes in the food canal, optical methods for monitoring mouthpart activity, and a computer technique for behavioural event recording. Also described is the use of "flow charts" or "decision diagrams" to model interrelated sequences of behaviours.

  3. The study of insect blood-feeding behaviour: 2. Recording techniques and the use of flow charts

    Directory of Open Access Journals (Sweden)

    J. J. B. Smith

    1987-01-01

    Full Text Available This paper continues a discussion of approaches and methodologies we have used in our studies of feeding in haematophagous insects. Described are techniques for directly monitoring behaviour: electrical recording of feeding behaviour via resistance changes in the food canal, optical methods for monitoring mouthpart activity, and a computer technique for behavioural event recording. Also described is the use of "flow charts" or "decision diagrams" to model interrelated sequences of behaviours.

  4. The study of insect blood-feeding behaviour: 2. Recording techniques and the use of flow charts

    OpenAIRE

    J. J. B. Smith; Friend,W. G.

    1987-01-01

    This paper continues a discussion of approaches and methodologies we have used in our studies of feeding in haematophagous insects. Described are techniques for directly monitoring behaviour: electrical recording of feeding behaviour via resistance changes in the food canal, optical methods for monitoring mouthpart activity, and a computer technique for behavioural event recording. Also described is the use of "flow charts" or "decision diagrams" to model interrelated sequences of behaviours.

  5. Hearing configuration in children with cCMV infection and proposal of a flow chart for hearing evaluation.

    Science.gov (United States)

    Foulon, Ina; Vleurinck, Leen; Kerkhofs, Kristin; Gordts, Frans

    2015-01-01

    This study had three main goals: (1) to determine the hearing configuration in hearing-impaired children born with a congenital CMV (cCMV) infection, (2) to see whether auditory neuropathy spectrum disorder (ANSD) was present, and (3) to propose a flow chart for the follow-up of hearing in children with cCMV. Hearing configuration and the presence of ANSD in cCMV infected children was analysed. Selection criteria were: hearing-impaired children with a regular audiometric follow-up for at least 36 months, no other major risk factors for hearing loss, a normal middle-ear status, and an appropriate behavioral response to the given pure-tone stimuli. Out of a cohort of 206 cCMV infected children, 18 hearing-impaired children were selected. Audiograms of all children showed a flat configuration of SNHL: the slope between octave bands was never greater than 10 decibels. None of the 18 children were found to have ANSD. Hearing impairment in cCMV infants affected all frequencies equally and ANSD does not appear to be a feature of cCMV infection. A flow chart for hearing follow-up in children with cCMV infection was suggested in order to provide guidance, improve uniformity in follow-up, and to make results easier to compare.

  6. Digital Mapping Charting and Geodesy analysis Program (DMAP) Review of Technical Initiatives for FY03

    National Research Council Canada - National Science Library

    Breckenridge, John

    2003-01-01

    The Naval DMAP serves as a technical representative for the Oceanographer of the Navy, NO96 to address significant issues relevant to the Navy's use and development of digital Mapping, Charting & Geodesy (MC&G) data...

  7. Improved detection of incipient anomalies via multivariate memory monitoring charts: Application to an air flow heating system

    KAUST Repository

    Harrou, Fouzi

    2016-08-11

    Detecting anomalies is important for reliable operation of several engineering systems. Multivariate statistical monitoring charts are an efficient tool for checking the quality of a process by identifying abnormalities. Principal component analysis (PCA) was shown effective in monitoring processes with highly correlated data. Traditional PCA-based methods, nevertheless, often are relatively inefficient at detecting incipient anomalies. Here, we propose a statistical approach that exploits the advantages of PCA and those of multivariate memory monitoring schemes, like the multivariate cumulative sum (MCUSUM) and multivariate exponentially weighted moving average (MEWMA) monitoring schemes to better detect incipient anomalies. Memory monitoring charts are sensitive to incipient anomalies in process mean, which significantly improve the performance of PCA method and enlarge its profitability, and to utilize these improvements in various applications. The performance of PCA-based MEWMA and MCUSUM control techniques are demonstrated and compared with traditional PCA-based monitoring methods. Using practical data gathered from a heating air-flow system, we demonstrate the greater sensitivity and efficiency of the developed method over the traditional PCA-based methods. Results indicate that the proposed techniques have potential for detecting incipient anomalies in multivariate data. © 2016 Elsevier Ltd

  8. prepare_taxa_charts

    Science.gov (United States)

    Lakhujani, Vijay; Badapanda, Chandan

    2017-06-01

    QIIME (Quantitative Insights Into Microbial Ecology) is one of the most popular open-source bioinformatics suite for performing metagenome, 16S rRNA amplicon and Internal Transcribed Spacer (ITS) data analysis. Although, it is very comprehensive and powerful tool, it lacks a method to provide publication ready taxonomic pie charts. The script plot_taxa_summary . py bundled with QIIME generate a html file and a folder containing taxonomic pie chart and legend as separate images. The images have randomly generated alphanumeric names. Therefore, it is difficult to associate the pie chart with the legend and the corresponding sample identifier. Even if the option to have the legend within the html file is selected while executing plot_taxa_summary . py , it is very tedious to crop a complete image (having both the pie chart and the legend) due to unequal image sizes. It requires a lot of time to manually prepare the pie charts for multiple samples for publication purpose. Moreover, there are chances of error while identifying the pie chart and legend pair due to random alphanumeric names of the images. To bypass all these bottlenecks and make this process efficient, we have developed a python based program, prepare_taxa_charts . py , to automate the renaming, cropping and merging of taxonomic pie chart and corresponding legend image into a single, good quality publication ready image. This program not only augments the functionality of plot_taxa_summary . py but is also very fast in terms of CPU time and user friendly.

  9. MIXMAX charts

    NARCIS (Netherlands)

    Albers, Willem/Wim

    For attribute data with (very) small failure rates control charts based on subsequent groups of r failure times, for some r >= 1, have been shown to be attractive. This especially holds for charts which stop once the maximum (MAX) of such a group is sufficiently small, as this choice allows a

  10. Vitamin Chart

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Vitamin Chart KidsHealth / For Teens / Vitamin Chart Print en español Tabla de las vitaminas Type Benefits Sources Quantity Vitamin A Vitamin A prevents eye problems, promotes a ...

  11. CUMIN charts

    NARCIS (Netherlands)

    Albers, Willem/Wim; Kallenberg, W.C.M.

    Abstract. Classical control charts are very sensitive to deviations from normality. In this respect, nonparametric charts form an attractive alternative. However, these often require considerably more Phase I observations than are available in practice. This latter problem can be solved by

  12. Radar Chart

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Radar Chart collection is an archived product of summarized radar data. The geographic coverage is the 48 contiguous states of the United States. These hourly...

  13. Chart Series

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Centers for Medicare and Medicaid Services (CMS) offers several different Chart Series with data on beneficiary health status, spending, operations, and quality...

  14. MINDCUMIN charts

    NARCIS (Netherlands)

    Albers, Willem/Wim; Kallenberg, W.C.M.

    A serious drawback of classical control charts is their high sensitivity to deviations from normality. By now, many alternative procedures, often of a nonparametric nature, have been proposed. A danger with these competitors is that unrealistically large Phase I samples might be needed. This can be

  15. 28 CFR Appendix to Subpart A - International Terrorism Victim Expense Reimbursement Program (ITVERP); Chart of Expense...

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false International Terrorism Victim Expense... Administration DEPARTMENT OF JUSTICE (CONTINUED) CRIME VICTIM SERVICES International Terrorism Victim Expense Reimbursement Program Pt. 94, Subpt. A, App. Appendix to Subpart A—International Terrorism Victim Expense...

  16. Redesigning flow injection after 40 years of development: Flow programming.

    Science.gov (United States)

    Ruzicka, Jaromir Jarda

    2018-01-01

    Automation of reagent based assays, by means of Flow Injection (FI), is based on sample processing, in which a sample flows continuously towards and through a detector for quantification of the target analyte. The Achilles heel of this methodology, the legacy of Auto Analyzer®, is continuous reagent consumption, and continuous generation of chemical waste. However, flow programming, assisted by recent advances in precise pumping, combined with the lab-on-valve technique, allows the FI manifold to be designed around a single confluence point through which sample and reagents are sequentially directed by means of a series of flow reversals. This approach results in sample/reagent mixing analogous to the traditional FI, reduces sample and reagent consumption, and uses the stop flow technique for enhancement of the yield of chemical reactions. The feasibility of programmable Flow Injection (pFI) is documented by example of commonly used spectrophotometric assays of, phosphate, nitrate, nitrite and glucose. Experimental details and additional information are available in online tutorial http://www.flowinjectiontutorial.com/. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. The impact of patent eligibility on biotech patents: A flow chart for determining patent eligibility and an immune therapy case study

    Science.gov (United States)

    Chang, Bao-Chi; Wang, Shyh-Jen

    2015-01-01

    US common law recites a natural law, natural phenomenon or abstract idea as exceptions to the 4 statutory patentable categories to guard against the wholesale preemption of fundamental principles. The very recent evolutions of patent exceptions in the US may increase the difficulty of patenting and may create uncertainty in determining patent eligibility. To solve the thorny problem of eligibility, this study presents a flow chart based on the courts’ decisions that can serve as a set of guidelines for determining patent eligibility. A case related to prostate cancer immune therapy is presented for discussion. PMID:25714661

  18. Minimum control charts

    NARCIS (Netherlands)

    Albers, Willem/Wim; Kallenberg, W.C.M.

    Standard control charts are very sensitive to estimation effects and/or deviations from normality. Hence a program has been carried out to remedy these problems. This is quite adequate in most circumstances, but not in all. In the present paper, the remaining complication is attacked: what to do if

  19. S.E. Mitchell Vascular Anomalies Flow Chart (SEMVAFC): a visual pathway combining clinical and imaging findings for classification of soft-tissue vascular anomalies.

    Science.gov (United States)

    Tekes, A; Koshy, J; Kalayci, T O; Puttgen, K; Cohen, B; Redett, R; Mitchell, S E

    2014-05-01

    Classification of vascular anomalies (VAs) is challenging due to overlapping clinical symptoms, confusing terminology in the literature and unfamiliarity with this complex entity. It is important to recognize that VAs include two distinct entities, vascular tumours (VTs) and vascular malformations (VaMs). In this article, we describe SE Mitchell Vascular Anomalies Flow Chart (SEMVAFC), which arises from a multidisciplinary approach that incorporates clinical symptoms, physical examination and magnetic resonance imaging (MRI) findings to establish International Society for the Study of Vascular Anomalies (ISSVA)-based classification of the VAs. SEMVAFC provides a clear visual pathway for physicians to accurately diagnose Vas, which is important as treatment, management, and prognosis differ between VTs and VaMs. Copyright © 2014 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

  20. A Study of Acoustic Forcing on Gas Centered Swirl Coaxial Reacting Flows (Conference Paper with Briefing Charts)

    Science.gov (United States)

    2017-01-09

    tangential forces are responsible for atomizing the liquid propellant . This injector is ideally suited for oxygen-rich staged combustion cycles and... combustion systems are for propulsion, limited tankage dictates that on-board propellants be stored in condensed form – e.g., kerosene, liquid oxygen in...centered, swirl-coaxial injector employed liquid rocket engine relevant propellants of gaseous oxygen and RP-2. The reacting flow field behavior at

  1. Analytical laboratory quality control charting

    Energy Technology Data Exchange (ETDEWEB)

    O' Bryan, Ervin F.

    2001-06-11

    In life the importance of setting goals is stressed. The desired end result must be envisioned to chart a path and determine indicators to provide feedback on the process. Quality does not happen by accident but is achieved through a constant process of setting goals, process development, monitoring process indicators, fine tuning the process, and achieving results. These goals are to be focused and clearly measurable. In industry and life the setting of goals with clear process indicators is often difficult because of the variable end result and scarcity of measurements. Laboratories are fortunate in that they have a plethora of measurements with known or desired end results (controls) to monitor the process and give instantaneous feedback on quality. A key quality tool used by the laboratory to monitor and evaluate the lab processes is control charting. When properly utilized Quality Control (QC) Charts allow labs to be proactive in addressing problems rather than reactive. Several methods are available for control charting and some are listed in the references/information sources. The content for this paper is based on the control-charting program utilized at the Department of Energy's Fernald site. This control-charting program has specific areas of emphasis, simple charts, trend analyses, and effective follow-up.

  2. Self adapting control charts

    OpenAIRE

    Albers, Willem/Wim; Kallenberg, W. C. M.

    2004-01-01

    When the distributional form of the observations differs from normality, standard control charts are often seriously in error. Such model errors can be avoided with (modified) nonparametric control charts. Unfortunately, these control charts suffer from large stochastic errors due to estimation. In between are so called parametric control charts. All three of them are discussed in this paper as well as a combined chart, which chooses one of the three control charts according to the appropriat...

  3. Excel 2007 Charts

    CERN Document Server

    Walkenbach, John

    2008-01-01

    Excel, the top number-crunching tool, now offers a vastly improved charting function to help you give those numbers dimension and relativity. John Walkenbach, a.k.a. Mr. Spreadsheet, clearly explains all these charting features and shows you how to choose the right chart for your needs. You'll learn to modify data within the chart, deal with missing data, format your chart, use trend lines, construct "impossible" charts, create charts from pivot tables, dress them up with graphics, and more. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.

  4. Optimal power flow solution using evolutionary programming

    Energy Technology Data Exchange (ETDEWEB)

    Doraiswamy, T.; Ravikumar, R.; Ramya, S.C.; Vandhana, M.S.; Swarupini, S. [Rajalakshmi Engineering College, Chennai Tamil Nadu (India). Dept. of Electrical and Electronics Engineering

    2005-07-01

    Optimal power flow (OPF) is used to determine the optimal outputs of generators, bus voltages, and transformer tap settings in power systems. This paper provided details of an evolutionary programming (EP) algorithm for solving OPF. EP is a stochastic optimization method which analyzes the mechanics of evolution to produce optimal solutions by evolving a population of candidate solutions towards the global minimum through the use of a mutation operator and selection scheme. In this study, EP was used to determine the global optimum solution to the OPF for a range of constraints and objective functions as well as to develop non-convex generator cost curves. The proposed algorithm was applied to an IEEE 30-bus test system under different generator input-output curves. Two sets of generator cost curves were then used to illustrate the robustness of the technique. The first case considered all curves as quadratic. In the second case, a number of local optimal solutions for the dispatch problem were developed. The EP-based OPF algorithm method was then compared with results obtained from a genetic algorithm. Results showed that the EP-based algorithm was reliable even in nonlinear cases with value point loading. It was concluded that the proposed algorithm produced optimal results. 12 refs., 4 tabs., 2 figs.

  5. Administrative Procedures Manual for Instructional Program in Medical Vocabulary and Medical Chart Abstracting for Tumor Registrars. Revised 1972.

    Science.gov (United States)

    Human Resources Research Organization, Alexandria, VA.

    The manual provides the information required to administer the training program. The first three sections describe: (1) the requirements for and objectives of the tumor registrar training program; (2) the format (incorporating programed instruction and self-scoring practical exercises), student evaluation techniques, and contents of the…

  6. Planning Student Flow with Linear Programming: A Tunisian Case Study.

    Science.gov (United States)

    Bezeau, Lawrence

    A student flow model in linear programming format, designed to plan the movement of students into secondary and university programs in Tunisia, is described. The purpose of the plan is to determine a sufficient number of graduating students that would flow back into the system as teachers or move into the labor market to meet fixed manpower…

  7. Differential diagnosis and diagnostic flow chart of joint hypermobility syndrome/ehlers-danlos syndrome hypermobility type compared to other heritable connective tissue disorders.

    Science.gov (United States)

    Colombi, Marina; Dordoni, Chiara; Chiarelli, Nicola; Ritelli, Marco

    2015-03-01

    Joint hypermobility syndrome/Ehlers-Danlos syndrome hypermobility type (JHS/EDS-HT) is an evolving and protean disorder mostly recognized by generalized joint hypermobility and without a defined molecular basis. JHS/EDS-HT also presents with other connective tissue features affecting a variety of structures and organs, such as skin, eye, bone, and internal organs. However, most of these signs are present in variable combinations and severity in many other heritable connective tissue disorders. Accordingly, JHS/EDS-HT is an "exclusion" diagnosis which needs the absence of any consistent feature indicative of other partially overlapping connective tissue disorders. While both Villefranche and Brighton criteria include such an exclusion as a mandatory item, a systematic approach for reaching a stringent clinical diagnosis of JHS/EDS-HT is still lacking. The absence of a consensus on the diagnostic approach to JHS/EDS-HT concerning its clinical boundaries with similar conditions contribute to limit our actual understanding of the pathologic and molecular bases of this disorder. In this review, we revise the differential diagnosis of JHS/EDS-HT with those heritable connective tissue disorders which show a significant overlap with the former and mostly include EDS classic, vascular and kyphoscoliotic types, osteogenesis imperfecta, Marfan syndrome, Loeys-Dietz syndrome, arterial tortuosity syndrome, and lateral meningocele syndrome. A diagnostic flow chart is also offered with the attempt to support the less experienced clinician in stringently recognizing JHS/EDS-HT and stimulate the debate in the scientific community for both management and research purposes. © 2015 Wiley Periodicals, Inc.

  8. Prenatal Genetic Testing Chart

    Science.gov (United States)

    ... Advocacy For Patients About ACOG Prenatal Genetic Testing Chart (Infographic) Home For Patients Search FAQs Prenatal Genetic Testing Chart (Infographic) PFSI010 ››› Weeks 1–4 Weeks 5–8 ...

  9. Reading charts in ophthalmology.

    Science.gov (United States)

    Radner, W

    2017-08-01

    A new generation of logarithmic reading charts has sparked interest in standardized reading performance analyses. Such reading charts have been developed according to the standards of the International Council of Ophthalmology. The print size progression in these calibrated charts is in accordance with the mathematical background of EN ISO 8596. These reading charts are: the Bailey-Lovie Word Reading Chart, the Colenbrander English Continuous Text Near Vision Cards, the Oculus Reading Probe II, the MNREAD Charts, the SKread Charts, and the RADNER Reading Charts. The test items used for these reading charts differ among the charts and are standardized to various extents. The Bailey-Lovie Charts, MNREAD Charts, SKread Charts, and RADNER Charts are also meant to measure reading speed and allow determination of further reading parameters such as reading acuity, reading speed based on reading acuity, critical print size, reading score, and logMAR/logRAD ratio. Such calibrated reading charts have already provided valuable insights into the reading performance of patients in many research studies. They are available in many languages and thus facilitate international communication about near visual performance. In the present review article, the backgrounds of these modern reading charts are presented, and their different levels of test-item standardization are discussed. Clinical research studies are mentioned, and a discussion about the immoderately high number of reading acuity notations is included. Using the logReading Acuity Determination ([logRAD] = reading acuity equivalent of logMAR) measure for research purposes would give reading acuity its own identity as a standardized reading parameter in ophthalmology.

  10. A dispersion control chart

    NARCIS (Netherlands)

    Riaz, M.

    2008-01-01

    The study proposes a Shewhart-type control chart, namely Q chart, based on inter-quartile range, for monitoring changes (especially of moderate and large amounts which is major concern of Shewhart-type control charts) in process dispersion assuming normality of quality characteristic to be

  11. Flowcharting with D-charts

    Science.gov (United States)

    Meyer, D.

    1985-01-01

    A D-Chart is a style of flowchart using control symbols highly appropriate to modern structured programming languages. The intent of a D-Chart is to provide a clear and concise one-for-one mapping of control symbols to high-level language constructs for purposes of design and documentation. The notation lends itself to both high-level and code-level algorithmic description. The various issues that may arise when representing, in D-Chart style, algorithms expressed in the more popular high-level languages are addressed. In particular, the peculiarities of mapping control constructs for Ada, PASCAL, FORTRAN 77, C, PL/I, Jovial J73, HAL/S, and Algol are discussed.

  12. Chesapeake Highway Advisories Routing Traffic, Chart, Business Plan

    Science.gov (United States)

    1996-10-01

    THE BUSINESS PLAN IS ORGANIZED INTO FOUR MAJOR SECTIONS. THE FIRST SECTION IS INTRODUCTORY IN NATURE AND PROVIDES BACKGROUND INFORMATION ON ITS AND THE CHART PROGRAM IN MARYLAND. IT INCLUDES THE CHART MISSION, GOALS AND OBJECTIVES, AS WELL AS OVERVIE...

  13. The CMC/3DPNS computer program for prediction of three-dimensional, subsonic, turbulent aerodynamic juncture region flow. Volume 3: Programmers' manual

    Science.gov (United States)

    Orzechowski, J. A.

    1982-01-01

    The CMC fluid mechanics program system was developed to transmit the theoretical evolution of finite element numerical solution methodology, applied to nonlinear field problems into a versatile computer code for comprehensive flow field analysis. A detailed view of the code from the standpoint of a computer programmer's use is presented. A system macroflow chart and detailed flow charts of several routines necessary to interact with a theoretican/user to modify the operation of this program are presented. All subroutines and details of usage, primarily for input and output routines are described. Integer and real scalars and a cross reference list denoting subroutine usage for these scalars are outlined. Entry points in dynamic storage vector IZ; the lengths of each vector accompanying the scalar definitions are described. A listing of the routines peculiar to the standard test case and a listing of the input deck and printout for this case are included.

  14. Fractional smith chart theory

    KAUST Repository

    Shamim, Atif

    2011-03-01

    For the first time, a generalized Smith chart is introduced here to represent fractional order circuit elements. It is shown that the standard Smith chart is a special case of the generalized fractional order Smith chart. With illustrations drawn for both the conventional integer based lumped elements and the fractional elements, a graphical technique supported by the analytical method is presented to plot impedances on the fractional Smith chart. The concept is then applied towards impedance matching networks, where the fractional approach proves to be much more versatile and results in a single element matching network for a complex load as compared to the two elements in the conventional approach. © 2010 IEEE.

  15. The Sensitivity, Specificity and Predictive Values of Snellen Chart Compared to the Diagnostic Test in Amblyopia Screening Program in Iran

    Directory of Open Access Journals (Sweden)

    Fatemeh Rivakani

    2015-12-01

    Full Text Available Introduction Amblyopia is a leading cause of visual impairment in both childhood and adult populations. Our aim in this study was to assess the epidemiological characteristics of the amblyopia screening program in Iran. Materials and Methods A cross-sectional study was done on a randomly selected sample of 4,636 Iranian children who were referred to screening program in 2013 were participated in validity study, too. From each provinces the major city were selected. Screening and diagnostic tests were done by instructors in first stage and optometrists in second stage, respectively. Finally data were analyzed by Stata version 13. Results The sensitivity was ranged from 74% to 100% among the various provinces such that Fars and Ardabil province had maximum and minimum values, respectively. The pattern of specificity was differ and ranged 44% to 84% among the provinces; Hormozgan and Fars had maximum and minimum values, respectively. The positive predictive value was also ranged from 35% to %81 which was assigned to Khuzestan and Ardabil provinces, respectively. The range of Negative Predictive value was 61% to 100% which was belonged to Ardabil and Fars provinces. Conclusion The total sensitivity (89% and negative predictive values (93% of screening test among children aged 3-6 years is acceptable, but only 51% of children refereed to second stage are true positive and this imposes considerable cost to health system.

  16. European Research Program on Viscous Flows

    Science.gov (United States)

    1980-11-01

    Marseille (item 1.11) or from Alziary de Roquefort and Bonnet, LDF, Poitiers, (items 1.15 and 1.42). No response for the second year was received from...flows, is the continuing investigation of Roquefort and Bonnet, CEAT, Poitiers (item 7.16). It is reported that: "Space-time correlation are made with...corps de revolution profile. Breve information la Recherche Aerospatiale No.1980-3 7.16a Th.A. de Roquefort Caracterisation des structure dans un

  17. Development of Markup Language for Medical Record Charting: A Charting Language.

    Science.gov (United States)

    Jung, Won-Mo; Chae, Younbyoung; Jang, Bo-Hyoung

    2015-01-01

    Nowadays a lot of trials for collecting electronic medical records (EMRs) exist. However, structuring data format for EMR is an especially labour-intensive task for practitioners. Here we propose a new mark-up language for medical record charting (called Charting Language), which borrows useful properties from programming languages. Thus, with Charting Language, the text data described in dynamic situation can be easily used to extract information.

  18. Google Charts Testing | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This demo is created without mapsApiKey, the data lives in a virtual data table that generated by the Google Chart API. 36 36 1,403 1,403. 1,403. The following pie chart applies the data for the Adaptation Options (simplified version) to calculate the amount for each program type and percentage. Simple Pie chart applying ...

  19. BASIC program estimates steam flow in blowoff lines

    Energy Technology Data Exchange (ETDEWEB)

    Ganapathy, V.

    1985-07-01

    This article provides in detail the computer program designed to estimate steam blowing of pipelines, performed to remove such things as mill scale and debris. Too high a steam flow results in pipe erosion, while too low a flow may not adequately clean the lines. The general procedure is to operate the boiler at a pressure that will produce the required flow when the steam is allowed to escape to the atmosphere through the pipelines being cleaned. Under these conditions, usually, sonic velocity is achieved at the pipe exit and the usual formula which relates flow to pressure drop is not applicable. The program provided can be run directly on the IBM PC or equivalent systems.

  20. CDC Child Growth Charts

    Data.gov (United States)

    U.S. Department of Health & Human Services — CDC child growth charts consist of a series of percentile curves that illustrate the distribution of selected body measurements in U.S. children. Pediatric growth...

  1. Great Lakes Ice Charts

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Charts show ice extent and concentration three times weekly during the ice season, for all lakes except Ontario, from the 1973/74 ice season through the 2001/2002...

  2. Barograms / Barograph Charts

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Barograms are weekly rectangular charts recording barometric pressure at a given station. The barograph is an instrument that makes a continuous pen and ink trace of...

  3. Smart Book Charts

    Science.gov (United States)

    Chinnapongse, Ronald L.

    2015-01-01

    Smart book charts for TPSM: Heatshield for Extreme Entry Environment Technology (HEEET), Conformal Ablative TPS (CA-TPS), 3D Woven Multifunctional Ablative TPS (3D MAT), and Adaptable, Deployable, Entry and Placement Technology (ADEPT).

  4. Understanding Charts and Graphs.

    Science.gov (United States)

    1987-07-28

    Understanding Charts and Graphs Stephen M. Kosslyn Harvard University jccG3ssio For ’ Running head : Understanding graphs/ 1236 illia JaCodHas...concepts. That is, a "compliance class’ is in fact something in a reader’s head . The reader must know both the individual concepts and the general...above. "’ wt~ -.. ;-.4-v, Understanding charts and graphs -54- References Bertin, J. (1983). Semiology of Graphs (Trans. W. J. Berg). Madison, WI

  5. On multivariate control charts

    OpenAIRE

    Frisén, Marianne

    2011-01-01

    Industrial production requires multivariate control charts to enable monitoring of several components. Recently there has been an increased interest also in other areas such as detection of bioterrorism, spatial surveillance and transaction strategies in finance. In the literature, several types of multivariate counterparts to the univariate Shewhart, EWMA and CUSUM methods have been proposed. We review general approaches to multivariate control chart. Suggestions are made on the special chal...

  6. The Hill Chart Calculation for Pelton Runner Models using the HydroHillChart - Pelton Module Software

    Directory of Open Access Journals (Sweden)

    Adelina Bostan

    2015-07-01

    Full Text Available The Pelton turbines industrial design is based on the hill chart characteristics obtained by measuring the models. Primary data measurements used to obtain the hill chart can be processed graphically, by hand or by using graphic programs respectively CAD programs; the HydroHillChart - Pelton module software is a specialized tool in achieving the hill chart, using interpolation cubic spline functions. Thereby, based on measurements of several models of Pelton turbines, a computerized library, used to design industrial Pelton turbines can be created. The paper presents the universal characteristics calculated by using the HydroHillChart - Pelton module software for a series of Pelton runners.

  7. Hybrid Information Flow Analysis for Programs with Arrays

    Directory of Open Access Journals (Sweden)

    Gergö Barany

    2016-07-01

    Full Text Available Information flow analysis checks whether certain pieces of (confidential data may affect the results of computations in unwanted ways and thus leak information. Dynamic information flow analysis adds instrumentation code to the target software to track flows at run time and raise alarms if a flow policy is violated; hybrid analyses combine this with preliminary static analysis. Using a subset of C as the target language, we extend previous work on hybrid information flow analysis that handled pointers to scalars. Our extended formulation handles arrays, pointers to array elements, and pointer arithmetic. Information flow through arrays of pointers is tracked precisely while arrays of non-pointer types are summarized efficiently. A prototype of our approach is implemented using the Frama-C program analysis and transformation framework. Work on a full machine-checked proof of the correctness of our approach using Isabelle/HOL is well underway; we present the existing parts and sketch the rest of the correctness argument.

  8. Tukey's control chart.

    Science.gov (United States)

    Alemi, Farrokh

    2004-01-01

    This article presents the idea of Tukey's Control Chart, a method of analyzing data based on the concepts developed by John Tukey for calculation of confidence intervals for medians. The procedure is simple to implement (no need to calculate averages or standard deviations); it does not assume any distribution of the data; it can be applied to small data sets; and it is robust and not affected by occasional unusual observations (outliers). The article provides examples of the application of Tukey's Control Chart to both patients' lifestyle management and business process improvement.

  9. Data-flow Analysis of Programs with Associative Arrays

    Directory of Open Access Journals (Sweden)

    David Hauzar

    2014-05-01

    Full Text Available Dynamic programming languages, such as PHP, JavaScript, and Python, provide built-in data structures including associative arrays and objects with similar semantics—object properties can be created at run-time and accessed via arbitrary expressions. While a high level of security and safety of applications written in these languages can be of a particular importance (consider a web application storing sensitive data and providing its functionality worldwide, dynamic data structures pose significant challenges for data-flow analysis making traditional static verification methods both unsound and imprecise. In this paper, we propose a sound and precise approach for value and points-to analysis of programs with associative arrays-like data structures, upon which data-flow analyses can be built. We implemented our approach in a web-application domain—in an analyzer of PHP code.

  10. Foundations of Total Functional Data-Flow Programming

    Directory of Open Access Journals (Sweden)

    Baltasar Trancón y Widemann

    2014-06-01

    Full Text Available The field of declarative stream programming (discrete time, clocked synchronous, modular, data-centric is divided between the data-flow graph paradigm favored by domain experts, and the functional reactive paradigm favored by academics. In this paper, we describe the foundations of a framework for unifying functional and data-flow styles that differs from FRP proper in significant ways: It is based on set theory to match the expectations of domain experts, and the two paradigms are reduced symmetrically to a low-level middle ground, with strongly compositional semantics. The design of the framework is derived from mathematical first principles, in particular coalgebraic coinduction and a standard relational model of stateful computation. The abstract syntax and semantics introduced here constitute the full core of a novel stream programming language.

  11. Improvement of Unbalanced Load Flow Program for Large Power Systems

    Science.gov (United States)

    Imai, Shinichi; Suzuki, Haruhiko; Iba, Kenji; Fujiwara, Shuhei

    The idea of unbalanced power flow calculation was proposed many years ago. At that time, however, the needs for such techniques was not an argent issue. But modern power system networks are comprised of long untransposed transmission lines. Therefore, for some kind of analysis, it is now almost impossible to treat a system as though it were a symmetrical network. The aims of most previous studies were oriented to solve voltage/current imbalance in local or small system because local imbalance was a serious concern. This is still an important issue, but more recently our needs have become concentrated on practical bulk power systems, since principal EHV lines are entirely untransposed. Following such a background, we have developed a practical unbalanced load flow program. This program was developed for steady state analysis of large scale of practical networks under many possible unbalanced conditions.

  12. Computing Programs for Determining Traffic Flows from Roundabouts

    Science.gov (United States)

    Boroiu, A. A.; Tabacu, I.; Ene, A.; Neagu, E.; Boroiu, A.

    2017-10-01

    For modelling road traffic at the level of a road network it is necessary to specify the flows of all traffic currents at each intersection. These data can be obtained by direct measurements at the traffic light intersections, but in the case of a roundabout this is not possible directly and the literature as well as the traffic modelling software doesn’t offer ways to solve this issue. Two sets of formulas are proposed by which all traffic flows from the roundabouts with 3 or 4 arms are calculated based on the streams that can be measured. The objective of this paper is to develop computational programs to operate with these formulas. For each of the two sets of analytical relations, a computational program was developed in the Java operating language. The obtained results fully confirm the applicability of the calculation programs. The final stage for capitalizing these programs will be to make them web pages in HTML format, so that they can be accessed and used on the Internet. The achievements presented in this paper are an important step to provide a necessary tool for traffic modelling because these computational programs can be easily integrated into specialized software.

  13. Effectiveness of a Medifast meal replacement program on weight, body composition and cardiometabolic risk factors in overweight and obese adults: a multicenter systematic retrospective chart review study.

    Science.gov (United States)

    Coleman, Christopher D; Kiel, Jessica R; Mitola, Andrea H; Langford, Janice S; Davis, Kevin N; Arterburn, Linda M

    2015-08-06

    Recent medical guidelines emphasize the importance of actively treating overweight and obesity with diet and lifestyle intervention to achieve ≥ 5% weight loss in a 6-month period. Commercial programs offer one approach provided there is evidence of their efficacy and safety. This study was conducted to evaluate the effectiveness of the Medifast® 4 & 2 & 1 Plan™ on weight loss, body composition and cardiometabolic risk factors in overweight and obese adults. A systematic retrospective chart review of 310 overweight and obese clients following the Medifast 4 & 2 & 1 Plan at one of 21 Medifast Weight Control Centers® was conducted. Data were recorded electronically and key data points were independently verified. The primary endpoint was change from baseline body weight at 12 weeks. Within group paired t-tests were used to examine changes from baseline in a completers population. Differences between gender and age subgroups were examined using bivariate t-tests and mixed model regression analyses. For the primary endpoint at 12 weeks, body weight among completers (n = 185) was reduced by a mean of 10.9 ± 5.6 kg (-10.1%, p weight was reduced by 16.0 ± 7.9 kg (-14.3%). At 12 and 24 weeks, 85% and 96% of those remaining on the plan, respectively, had lost ≥ 5% of their baseline body weight. Lean mass was preserved to within 5% of baseline throughout the 24 weeks, and fat mass represented ≥ 80% of the body weight lost from 12 weeks onward. Men, women, seniors (≥ 65 years), and non-seniors (weight reductions with preservation of lean mass. Significant improvements in blood pressure, pulse and waist-to-hip ratio were observed. Mean weight regain among the subset who entered a formal maintenance phase was 85%. The 4 & 2 & 1 Plan used at Medifast Weight Control Centers was effective for weight loss, preservation of lean mass and improvement in cardiometabolic risk factors. The plan was generally well tolerated in a broad population of overweight and obese

  14. Dimensions of flow during an experiential wilderness science program

    Science.gov (United States)

    Wang, Robert

    Over the past twenty-five years, there has been an alarming decline in academic performance among American students. This trend is seen in failing test scores, poor attendance, and low first-year retention rates at post-secondary institutions. There have been numerous studies that have examined this issue but few to offer solutions. Mihalyi Csikszentmihalyi, the originator of flow theory, suggests that poor academic performance might be best explained in terms of lack of student motivation and engagement (flow) rather than a lack of cognitive abilities. This study was designed to examine a series of activities conducted during an Experiential Wilderness Science Program at a college located in the Rocky Mountain region. Specifically, this study measured student engagement for each activity and described the dimensions (phenomenological, instructional, etc.) that were present when there was a high frequency of engagement among program participants. A combined quantitative and qualitative research methodology was utilized. The Experience Sampling Form (ESF) was administered to 41 freshman students participating in a 3-day wilderness science program to measure the frequency of engagement (flow) for nine different activities. A qualitative investigation using journals, participant interviews, and focus groups was used to describe the dimensions that were present when a high frequency of engagement among program participants was observed. Results revealed that engagement (flow) was highest during two challenge education activities and during a river sampling activity. Dimensions common among these activities included: an environment dimension, a motivation dimension, and an instruction dimension. The environment dimension included: incorporating novel learning activities, creating student interests, and introducing an element of perceived risk. The motivation dimension included: developing internal loci of control, facilitating high levels of self-efficacy, and

  15. Growth Charts (For Parents)

    Science.gov (United States)

    ... January 2014 previous 1 • 2 • 3 • 4 For Teens For Kids For Parents MORE ON THIS TOPIC What Is a Growth Disorder? Body Mass Index (BMI) Charts Failure to Thrive Preparing Your Child for Visits to the Doctor Your Child's Growth Growth Disorders Feeling Too Tall or Too Short What a Pain! Kids and ...

  16. Synthetic growth reference charts

    NARCIS (Netherlands)

    Hermanussen, Michael; Stec, Karol; Aßmann, Christian; Meigen, Christof; Van Buuren, Stef|info:eu-repo/dai/nl/074806777

    2016-01-01

    Objectives: To reanalyze the between-population variance in height, weight, and body mass index (BMI), and to provide a globally applicable technique for generating synthetic growth reference charts. Methods: Using a baseline set of 196 female and 197 male growth studies published since 1831, common

  17. Growth charts don't cure malnutrition.

    Science.gov (United States)

    Pyle, D F

    1986-01-01

    Growth chart monitoring developed as a technique designed to decrease infant and child morbidty. In order for similar techniques to reach those who need them most, special emphasis must be placed on the question of how services and information will be delivered. This problem of implementation, often neglected by primary health planners, becomes the linchpin of success or failure when small-scale projects with limited coverage are scaled up to large regional or national programs. Supervision is most often the weakest aspect of growth monitoring programs. This frequently results in improper use of the growth charts and insufficient attention to follow-up of the children at risk. Large scale schemes employing monitoring techniques have tended to spend an inordinate amount of time considering mechanics and technical questions at the expense of analyzing results. Thus, the time consumed by the weighing and the charting is so considerable that little time or energy remains to do what is really important, that is, to analyze individual charts and provide services to those whose growth is faltering. Until the focus shifts away from the numbers of children weighted to the follow-up activities undertaken, programs utilizing growth charts will continue to have limited results. Also, in order to make a successful leap from small-scale project to improved national health, careful planning is necessary when applying any health intervention.

  18. Using linear programming to analyze and optimize stochastic flow lines

    DEFF Research Database (Denmark)

    Helber, Stefan; Schimmelpfeng, Katja; Stolletz, Raik

    2011-01-01

    , to determine a production rate estimate. As our methodology is purely numerical, it offers the full modeling flexibility of stochastic simulation with respect to the probability distribution of processing times. However, unlike discrete-event simulation models, it also offers the optimization power of linear......This paper presents a linear programming approach to analyze and optimize flow lines with limited buffer capacities and stochastic processing times. The basic idea is to solve a huge but simple linear program that models an entire simulation run of a multi-stage production process in discrete time...... programming and hence allows us to solve buffer allocation problems. We show under which conditions our method works well by comparing its results to exact values for two-machine models and approximate simulation results for longer lines....

  19. Comparison of Lea Symbols chart and Sheridan Gardiner chart in assessing vision screening among pre-school children: a Malaysia perspective.

    Science.gov (United States)

    Omar, Rokiah; Hussin, Duratul Ain; Knight, Victor Feizal

    2012-03-01

    Compare the performance of Lea Symbols and Sheridan Gardiner charts against the standard test chart used to determine reduced VA during vision screening among pre-schoolers. Seven hundred seventy five pre-school participated where 389 subjects were boys and 386 subjects were girls were tested using the Lea Symbols chart and the Sheridan Gardiner chart. The mean age of the pre-school children was 5.3 +/- 0.7 years old. The Lea Symbols chart showed a higher sensitivity (97.5%) compared to the Sheridan Gardiner chart (57.1%). While the Sheridan Gardiner chart showed higher specificity (92.0%) compared to the Lea Symbols chart (45.0%). The Lea Symbols chart offers a better pick-up rate of visual impairment during a vision-screening program especially cases of amblyopia among pre-school children compared to the Sheridan Gardiner chart in Malaysia.

  20. Customised symphysio fundal height charts.

    Science.gov (United States)

    Shamawarna, K H B; Goonewardene, I M R; Perera, Y A G

    2012-12-01

    To evaluate the feasibility, applicability and the value of customised symphysio fundal height (SFH) charts developed for women of Indian origin in the United Kingdom (UK: CSFH - In chart) and women of African origin in the UK (CSFH - Af chart) in detecting fetal growth restriction and predicting low birth weight (LBW) of the neonate in a Lankan population, and to compare these results with the results obtained from the SFH chart currently used in Sri Lanka (FHB chart) and another SFH chart which uses a range of plus or minus 2-3 cm of the value of the gestational age in weeks as the reference range (GA ± 2 to 3 cm chart). Pregnant women (n = 416) with confirmed periods of gestation (POG) of customised charts the GA ± 2 to 3 cm chart was better than the FHB chart. Until a customised SFH chart is developed for Sri Lanka, the CSFH - In chart or the GA ± 2 to 3 cm chart should be used for antenatal monitoring of fetal growth.

  1. NOAA Raster Navigational Charts (RNC)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA, National Ocean Service, Office of Coast Survey, Marine Chart Division is responsible to build and maintain a suite of more than 1000 nautical charts that are...

  2. Weighing Rain Gauge Recording Charts

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Weighing rain gauge charts record the amount of precipitation that falls at a given location. The vast majority of the Weighing Rain Gauge Recording Charts...

  3. A process variability control chart

    NARCIS (Netherlands)

    Riaz, M.; Does, R.J.M.M.

    2009-01-01

    In this study a Shewhart type control chart namely the Vt chart, is proposed for improvedmonitoring of the process variability of a quality characteristic of interest Y . The proposed control chart is based on the ratio type estimator of the variance using a single auxiliary variable X. It is

  4. A process variability control chart

    OpenAIRE

    Riaz, M.; Does, R.J.M.M.

    2009-01-01

    In this study a Shewhart type control chart namely the Vt chart, is proposed for improvedmonitoring of the process variability of a quality characteristic of interest Y . The proposed control chart is based on the ratio type estimator of the variance using a single auxiliary variable X. It is assumed that (Y, X) follows a bivariate normal distribution. The design structure of the Vt chart is developed for Phase-I quality control and its comparison is made with those of the S2 chart (a well-kn...

  5. The Importance of Interpolation in Computerized Growth Charting.

    Science.gov (United States)

    Kiger, James R; Taylor, Sarah N

    2016-01-01

    Computer growth charting is increasingly available for clinical and research applications. The LMS method is used to define the growth curves on the charts most commonly used in practice today. The data points for any given chart are at discrete points, and computer programs may simply round to the closest LMS data point when calculating growth centiles. We sought to determine whether applying an interpolation algorithm to the LMS data for commonly used growth charts may reduce the inherent errors which occur with rounding to the nearest data point. We developed a simple, easily implemented interpolation algorithm to use with LMS data. Using published growth charts, we compared predicted growth centiles using our interpolation algorithm versus a standard rounding approach. Using a test scenario of a patient at the 50th centile in weight, compared to using our interpolation algorithm, the method of simply rounding to the nearest data point resulted in maximal z-score errors in weight of the following: 2.02 standard deviations for the World Health Organization 0-to-23 month growth chart, 1.07 standard deviations for the Fenton preterm growth chart, 0.71 standard deviations for the Olsen preterm growth chart, and 0.11 standard deviations for the CDC 2-to-18 year growth chart. Failure to include an interpolation algorithm when designing computerizing growth charts can lead to large errors in centile and z-score calculations.

  6. US Nuclear Regulatory Commission organization charts and functional statements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This document is the US NRC organizational structure and chart as of July 1, 1996. It contains the org charts for the Commission, ACRS, ASLAB, Commission staff offices, Executive Director for Operations, Office of the Inspector General, Program offices, and regional offices.

  7. [Statistical process control charts in perinatal mortality surveillance].

    Science.gov (United States)

    Montoya-Restrepo, Nora E; Correa-Morales, Juan C

    2009-01-01

    Applying statistical process control (SPC) charts in perinatal mortality surveillance (as an epidemiological indicator). The control charts were prepared using 51,840 births; 286 cases were produced from these births. All information came from SUSALUD between January 2004 and December 2007. Two control charts are presented; the first one's central line was considered to be the proportion of cases + 3 SD and the second one used the logits from the percentages of cases. Two control charts were prepared for monitoring perinatal mortality. The first considered the percentage of cases per month and an average of five cases per one thousand births was obtained (p=0.005). The logits were used for the second chart. Having SPC charts available for monitoring and analysing perinatal mortality will allow changes in service quality to be quickly detected and let aspects regarding the quality of the service being provided for mothers and the newborn to be evaluated. Specific interventions can also be programmed.

  8. On Static and Dynamic Control-Flow Information in Program Analysis and Transformation

    DEFF Research Database (Denmark)

    Damian, Daniel

    This thesis addresses several aspects of static and dynamic control-flow information in programming languages, by investigating its interaction with program transformation and program analysis. Control-flow information indicates for each point in a program the possible program points to be executed...... that a non-duplicating CPS transformation does not alter the result of a monovariant constraint-based control-flow analysis. Building on control-flow analysis, we show that traditional constraint-based binding-time analysis and traditional partial evaluation benefit from the effects of a CPS transformation...

  9. Airspace Flow Program Modeling in the Future ATC Concept Evaluation Tool Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Airspace Flow Program (AFP) is a new Traffic Flow Management (TFM) control technique that has entered operation in 2006. AFPs use two existing technologies,...

  10. Fractionating power and outlet stream polydispersity in asymmetrical flow field-flow fractionation. Part II: programmed operation.

    Science.gov (United States)

    Williams, P Stephen

    2017-01-01

    Asymmetrical flow field-flow fractionation (As-FlFFF) is a widely used technique for analyzing polydisperse nanoparticle and macromolecular samples. The programmed decay of cross flow rate is often employed. The interdependence of the cross flow rate through the membrane and the fluid flow along the channel length complicates the prediction of elution time and fractionating power. The theory for their calculation is presented. It is also confirmed for examples of exponential decay of cross flow rate with constant channel outlet flow rate that the residual sample polydispersity at the channel outlet is quite well approximated by the reciprocal of four times the fractionating power. Residual polydispersity is of importance when online MALS or DLS detection are used to extract quantitative information on particle size or molecular weight. The theory presented here provides a firm basis for the optimization of programmed flow conditions in As-FlFFF. Graphical abstract Channel outlet polydispersity remains significant following fractionation by As-FlFFF under conditions of programmed decay of cross flow rate.

  11. Adapting high-level language programs for parallel processing using data flow

    Science.gov (United States)

    Standley, Hilda M.

    1988-01-01

    EASY-FLOW, a very high-level data flow language, is introduced for the purpose of adapting programs written in a conventional high-level language to a parallel environment. The level of parallelism provided is of the large-grained variety in which parallel activities take place between subprograms or processes. A program written in EASY-FLOW is a set of subprogram calls as units, structured by iteration, branching, and distribution constructs. A data flow graph may be deduced from an EASY-FLOW program.

  12. A Structural Weight Estimation Program (SWEEP) for Aircraft. Volume 6 - Wing and Empennage Module. Appendix C: Program Flow Charts, Overlays (9.0) and (10,0)

    Science.gov (United States)

    1974-06-01

    8217•Ml »■! ron KASUiuu niiNi Br S»»K WN»i’" CMMI IIIIC • VUUUIIK PROO «uioriou CHWI sei - SHIP unr, «o citfrcroc iraAt • ■•HlLt’ DI51C-I 0*1...IIAUPINtS CHMI lin.1 INlttOUC TOttl CVtiNT^ CMMI IIIU SUONOUTIPC PK1(i* 100^711) I W 01 Wll» 1 OK Till IT« in Iff... tesi rat i tWt SKIP. NCUC-3 ro» COM;? ^.c/ios"" «c/c CIOCfT/l • IUCIIUC • «tl I • Mil If I - ISCC tH« • OOLIOIII CJONT • OJOUT111 07 M

  13. Macro Content and Operational Systems Flow Chart.

    Science.gov (United States)

    Sterling Inst., Washington, DC. Educational Technology Center.

    A multimedia course in economic analysis was developed and used in conjunction with the United States Naval Academy. (See ED 043 790 and ED 043 791 for final reports of the project evaluation and development model.) This report documents the first iteration of the macrolevel sequencing of the course elements, a process designed to depict the…

  14. CHARTE D'AUDIT INTERNE

    International Development Research Centre (IDRC) Digital Library (Canada)

    sblanchard

    CRDI). CHARTE D'AUDIT INTERNE. Mars 2015. 2. Assurances et conseils afin de soutenir le développement par l'innovation. La présente charte établit l'objet, le caractère indépendant et la portée de la fonction d'audit.

  15. Computer program to calculate three-dimensional boundary layer flows over wings with wall mass transfer

    Science.gov (United States)

    Mclean, J. D.; Randall, J. L.

    1979-01-01

    A system of computer programs for calculating three dimensional transonic flow over wings, including details of the three dimensional viscous boundary layer flow, was developed. The flow is calculated in two overlapping regions: an outer potential flow region, and a boundary layer region in which the first order, three dimensional boundary layer equations are numerically solved. A consistent matching of the two solutions is achieved iteratively, thus taking into account viscous-inviscid interaction. For the inviscid outer flow calculations, the Jameson-Caughey transonic wing program FLO 27 is used, and the boundary layer calculations are performed by a finite difference boundary layer prediction program. Interface programs provide communication between the two basic flow analysis programs. Computed results are presented for the NASA F8 research wing, both with and without distributed surface suction.

  16. Marine Corps Systems Command (MCSC) Program Executive Officer Land Systems (PEO LS) 2010 Advanced Planning Briefing to Industry (APBI) (BRIEFING CHARTS)

    Science.gov (United States)

    2010-04-07

    Pam Gulick Lead Program Analyst (ALA and BA Domain) 432.3023 pamela.gulick@usmc.mil Sherri Payne Program Analyst 432.3962 sherri.payne@usmc.mil Judith...Assessment Coordinator: Vacant C4 Architect: Vacant Intel Architect: Ms. Cecilia Hall Technologist: Mr. Martin Jackson T&E Lead: Mr. Joseph Murgo Safety Lead

  17. APLIKASI GANTT CHART PADA ALGORITMA PENJADUALAN PROSES

    Directory of Open Access Journals (Sweden)

    Sri Handayani

    2014-01-01

    Full Text Available Operating system is a compulsory subject taken in the Information Technology Student FTIK - USM . In the discussion of the material management process of the operating systems course , there are some scheduling algorithm which processes need to be understood and any existing process scheduling algorithm presented in the form of Grantt Charts . Because of the difficulties experienced by students in understanding the process of scheduling algorithms by an Operating System become researchers inspiration to conduct this study to make an application Grantt Chart.. This study uses a waterfall system development , where the flow will follow the research the phase in waterfall . This application will be built using Visual Basic 6 .  The purpose of this research is to produce an application of learning are presented in graphical form to facilitate students in understanding the material scheduling process performed by an operating system so that students can also understand how a computer can do multiple processes simultaneously.

  18. Linear genetic programming for time-series modelling of daily flow rate

    Indian Academy of Sciences (India)

    In this study linear genetic programming (LGP), which is a variant of Genetic Programming, and two versions of Neural Networks (NNs) are used in predicting time-series of daily flow rates at a station on Schuylkill River at Berne, PA, USA. Daily flow rate at present is being predicted based on different time-series scenarios.

  19. Google Charts Testing | IDRC - International Development Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Google Charts Testing. The following item is a demo of Google GeoChart. Please note that geo chart can only recognize country name or city name rather than location or address (that is google my map's expertise). Additionally, Geo chart does support title and legend. To render geo chart properly, please get a ...

  20. MAX-EWMA CHART FOR AUTOCORRELATED PROCESSES (MEWMAP CHART)

    National Research Council Canada - National Science Library

    Thaga, K; Yadavalli, V.S.S

    2012-01-01

    ENGLISH ABSTRACT: This paper proposes an exponentially weighted moving average (EWMA) control chart that is capable of detecting changes in both process mean and standard deviation for autocorrelated data...

  1. A Retrospective Chart Review of Dietary Diversity and Feeding Behavior of Children with Autism Spectrum Disorder before and after Admission to a Day-Treatment Program

    Science.gov (United States)

    Sharp, William G.; Jaquess, David L.; Morton, Jane F.; Miles, Aida G.

    2011-01-01

    The nutritional status and mealtime performance among a group of children with autism spectrum disorders (ASD) were examined before and after admission to an intensive feeding day-treatment program. Treatment involved escape extinction, reinforcement, and stimulus fading procedures. Outcomes focused on dietary diversity and mealtime performance,…

  2. Chart Your Own Future: How Your Individualized Education Program (IEP) Can Help. PACER Center ACTion Information Sheets. PHP-c113

    Science.gov (United States)

    PACER Center, 2006

    2006-01-01

    Although high school students cannot control every aspect of their school education, they do have the power to make changes in their education program. As they influence major parts of their IEP, they gain more freedom and more control over what happens to them. This action sheet describes three steps for high school students to consider in taking…

  3. Safe Minimum Internal Temperature Chart

    Science.gov (United States)

    ... JSR 286) Actions ${title} Loading... Safe Minimum Internal Temperature Chart Safe steps in food handling, cooking, and ... from other foods. Cook —Cook to the right temperature. Chill —Refrigerate food promptly. Cook all food to ...

  4. Charting Transnational Native American Studies

    Directory of Open Access Journals (Sweden)

    Hsinya Huang

    2012-06-01

    Full Text Available Introduction to the Special Forum entitled "Charting Transnational Native American Studies: Aesthetics, Politics, Identity," edited by Hsinya Huang, Philip J. Deloria, Laura M. Furlan, and John Gamber

  5. NOAA Electronic Navigational Charts (ENC)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Office of Coast Survey (OCS) has been involved in the development of a NOAA Electronic Navigational Chart (NOAA ENC) suite to support the marine transportation...

  6. Inland Electronic Navigational Charts (IENC)

    Data.gov (United States)

    Army Corps of Engineers, Department of the Army, Department of Defense — These Inland Electronic Navigational Charts (IENCs) were developed from available data used in maintenance of Navigation channels. Users of these IENCs should be...

  7. Create dynamic charts in Microsoft Office Excel 2007 and beyond

    CERN Document Server

    Scheck, Reinhold

    2009-01-01

    Extend your Excel 2007 skills-and create more-powerful and compelling charts in less time. Guided by an Excel expert, you'll learn how to turn flat, static charts into dynamic solutions-where you can visualize and manipulate data countless ways with a simple mouse click. Get the hands-on practice and examples you need to produce your own, professional-quality results. No programming required! Maximize the impact of your ideas and data! Learn how your design decisions affect perception and comprehensionMatch the right chart type to your communication objectiveVisualize-then build-your solut

  8. Application of machine learning and expert systems to Statistical Process Control (SPC) chart interpretation

    Science.gov (United States)

    Shewhart, Mark

    1991-01-01

    Statistical Process Control (SPC) charts are one of several tools used in quality control. Other tools include flow charts, histograms, cause and effect diagrams, check sheets, Pareto diagrams, graphs, and scatter diagrams. A control chart is simply a graph which indicates process variation over time. The purpose of drawing a control chart is to detect any changes in the process signalled by abnormal points or patterns on the graph. The Artificial Intelligence Support Center (AISC) of the Acquisition Logistics Division has developed a hybrid machine learning expert system prototype which automates the process of constructing and interpreting control charts.

  9. Multivariate Statistical Process Control Charts: An Overview

    OpenAIRE

    Bersimis, Sotiris; Psarakis, Stelios; Panaretos, John

    2006-01-01

    In this paper we discuss the basic procedures for the implementation of multivariate statistical process control via control charting. Furthermore, we review multivariate extensions for all kinds of univariate control charts, such as multivariate Shewhart-type control charts, multivariate CUSUM control charts and multivariate EWMA control charts. In addition, we review unique procedures for the construction of multivariate control charts, based on multivariate statistical techniques such as p...

  10. Lazy evaluation of FP programs: A data-flow approach

    Energy Technology Data Exchange (ETDEWEB)

    Wei, Y.H. [International Business Machines Corp., Yorktown Heights, NY (United States). Thomas J. Watson Research Center; Gaudiot, J.L. [University of Southern California, Los Angeles, CA (United States). Computer Research Inst.

    1988-12-31

    This paper presents a lazy evaluation system for the list-based functional language, Backus` FP in data-driven environment. A superset language of FP, called DFP (Demand-driven FP), is introduced. FP eager programs are transformed into DFP lazy programs which contain the notions of demands. The data-driven execution of DFP programs has the same effects of lazy evaluation. DFP lazy programs have the property of always evaluating a sufficient and necessary result. The infinite sequence generator is used to demonstrate the eager-lazy program transformation and the execution of the lazy programs.

  11. Programming heterogeneous MPSoCs tool flows to close the software productivity gap

    CERN Document Server

    Castrillón Mazo, Jerónimo

    2014-01-01

    This book provides embedded software developers with techniques for programmingheterogeneous Multi-Processor Systems-on-Chip (MPSoCs), capable of executing multiple applications simultaneously. It describes a set of algorithms and methodologies to narrow the software productivity gap, as well as an in-depth description of the underlying problems and challenges of today’s programming practices. The authors present four different tool flows: A parallelism extraction flow for applications writtenusing the C programming language, a mapping and scheduling flow for parallel applications, a special mapping flow for baseband applications in the context of Software Defined Radio (SDR) and a final flow for analyzing multiple applications at design time. The tool flows are evaluated on Virtual Platforms (VPs), which mimic different characteristics of state-of-the-art heterogeneous MPSoCs.   • Provides a novel set of algorithms and methodologies for programming heterogeneous Multi-Processor Systems-on-Chip (MPSoCs)...

  12. A Foundation for Flow-Based Program Matching Using Temporal Logic and Model Checking

    DEFF Research Database (Denmark)

    Brunel, Julien Pierre Manuel; Doligez, Damien; Hansen, Rene Rydhof

    2008-01-01

    different values within different control-flow paths, and a notion of witnesses that record such existential bindings for use in the subsequent program transformation process. We formalize CTL-VW and describe its use in the context of Coccinelle. We then assess the performance of the approach in practice......Reasoning about program control-flow paths is an important functionality of a number of recent program matching languages and associated searching and transformation tools. Temporal logic provides a well-defined means of expressing properties of control-flow paths in programs, and indeed......-VW (CTL with variables and witnesses) that is a suitable basis for the semantics and implementation of the Coccinelle’s program matching language. Our extension to CTL includes existential quantification over program fragments, which allows metavariables in the program matching language to range over...

  13. TerCharts: a VBA-MS Excel multiternary and multipurpose charting utility for data analysis, presentation, and modeling in environmental and earth sciences

    Science.gov (United States)

    Esawi, E. K.

    2009-03-01

    TerCharts is a comprehensive, fast, flexible, and versatile ternary charting utility that can be used for ternary data presentation analysis and modeling across many scientific disciplines. TerCharts is developed using Microsoft (MS) Excel 2003 and Visual Basic for Applications (VBA) which is an object oriented programming language developed by MS as a tool to enhance the capabilities of MS products. The Excel-VBA interface is important because normally chemical, geochemical, and mineralogical data used in teaching and basic research are processed using Excel spreadsheets, making TerCharts a more convenient tool for generating ternary charts which in turn can be used for data presentation and analysis. Ternary charts generated by this utility can be improved, edited, and modified utilizing MS Excel’s powerful charting and editing techniques.

  14. Market Mechanisms for Airspace Flow Program Slots Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to design a system to support a marketplace in which flight operators can exchange arrival slots in traffic flow management (TFM) initiatives such as...

  15. Market Mechanisms for Airspace Flow Program Slots Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Metron Aviation, Inc. proposes to design a system to support a marketplace in which flight operators can exchange arrival slots in traffic flow management (TFM)...

  16. VORSTAB: A computer program for calculating lateral-directional stability derivatives with vortex flow effect

    Science.gov (United States)

    Lan, C. Edward

    1985-01-01

    A computer program based on the Quasi-Vortex-Lattice Method of Lan is presented for calculating longitudinal and lateral-directional aerodynamic characteristics of nonplanar wing-body combination. The method is based on the assumption of inviscid subsonic flow. Both attached and vortex-separated flows are treated. For the vortex-separated flow, the calculation is based on the method of suction analogy. The effect of vortex breakdown is accounted for by an empirical method. A summary of the theoretical method, program capabilities, input format, output variables and program job control set-up are described. Three test cases are presented as guides for potential users of the code.

  17. 7 CFR 51.2276 - Color chart.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Color chart. 51.2276 Section 51.2276 Agriculture... Standards for Shelled English Walnuts (Juglans Regia) General § 51.2276 Color chart. The color chart (USDA Walnut Color Chart) to which reference is made in §§ 51.2281 and 51.2282 illustrates the four shades of...

  18. The ICS International Chronostratigraphic Chart

    NARCIS (Netherlands)

    Cohen, K.M.; Finney, S.C.; Gibbard, P.L.; Fan, J.-X.

    2013-01-01

    The International Commission on Stratigraphy (ICS) has a long tradition of producing international charts that communicate higher-order divisions of geological time and actual knowledge on the absolute numerical ages of their boundaries. The primary objective of ICS is to define precisely a global

  19. AMDIS and CHART update. 1

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, I.; Kato, T. [National Inst. for Fusion Science, Toki, Gifu (Japan); Igarashi, A. [Miyazaki Univ., Miyazaki (JP)] [and others

    2002-10-01

    A working group for updating atomic and molecular collision data in the NIFS database AMDIS (electron scattering) and CHART (ion scattering) has been organized. This group has searched and reviewed literatures for collecting relevant atomic data with are to be included into the database. This is a summary report of the activities of this working group. (author)

  20. A robust Xbar control chart

    NARCIS (Netherlands)

    Schoonhoven, M.; Does, R.J.M.M.

    2013-01-01

    This article studies alternative standard deviation estimators that serve as a basis to determine the control chart limits used for real-time process monitoring (phase II). Several existing (robust) estimation methods are considered. In addition, we propose a new estimation method based on a phase I

  1. Review of "Charting New Territory"

    Science.gov (United States)

    Trujillo, Tina

    2011-01-01

    "Charting New Territory: Tapping Charter Schools to Turn Around the Nation's Dropout Factories" argues for a more prominent role for charter operators in turning around perennially low-performing high schools. However, the report's ultimate findings and conclusions are out of proportion to the strength of the research evidence on school…

  2. Complexity and information flow analysis for multi-threaded programs

    Science.gov (United States)

    Ngo, Tri Minh; Huisman, Marieke

    2017-07-01

    This paper studies the security of multi-threaded programs. We combine two methods, i.e., qualitative and quantitative security analysis, to check whether a multi-threaded program is secure or not. In this paper, besides reviewing classical analysis models, we present a novel model of quantitative analysis where the attacker is able to select the scheduling policy. This model does not follow the traditional information-theoretic channel setting. Our analysis first studies what extra information an attacker can get if he knows the scheduler's choices, and then integrates this information into the transition system modeling the program execution. Via a case study, we compare this approach with the traditional information-theoretic models, and show that this approach gives more intuitive-matching results.

  3. A Computer Program for Flow-Log Analysis of Single Holes (FLASH)

    Science.gov (United States)

    Day-Lewis, F. D.; Johnson, C.D.; Paillet, Frederick L.; Halford, K.J.

    2011-01-01

    A new computer program, FLASH (Flow-Log Analysis of Single Holes), is presented for the analysis of borehole vertical flow logs. The code is based on an analytical solution for steady-state multilayer radial flow to a borehole. The code includes options for (1) discrete fractures and (2) multilayer aquifers. Given vertical flow profiles collected under both ambient and stressed (pumping or injection) conditions, the user can estimate fracture (or layer) transmissivities and far-field hydraulic heads. FLASH is coded in Microsoft Excel with Visual Basic for Applications routines. The code supports manual and automated model calibration. ?? 2011, The Author(s). Ground Water ?? 2011, National Ground Water Association.

  4. A comparison of phase I control charts

    Directory of Open Access Journals (Sweden)

    Coelho, Margarethe

    2015-08-01

    Full Text Available A carefully done Phase I analysis is a vital part of an overall statistical process control and monitoring regime. Distribution-free control charts can play a useful role in this analysis, as a parametric model assumption often cannot be adequately verified. The performance of two distribution-free charts for the location – the mean-rank and the median chart – are compared in this paper. For benchmarking reasons, the parametric -chart is included in the comparisons. It is seen that the distribution-free charts are in-control robust, whereas the -chart is not, and they both perform similarly to the -chart for normally distributed data. However, for non-normal data, they both outperform the -chart. The results provide evidence in favour of using distribution-free Phase I charts in practice. Concluding remarks and suggestions for future research are given.

  5. Generating Functionally Equivalent Programs Having Non-Isomorphic Control-Flow Graphs

    OpenAIRE

    Géraud, Rémi; Koscina, Mirko; Lenczner, Paul; Naccache, David; Saulpic, David

    2017-01-01

    One of the big challenges in program obfuscation consists in modifying not only the program's straight-line code (SLC) but also the program's control flow graph (CFG). Indeed, if only SLC is modified, the program's CFG can be extracted and analyzed. Usually, the CFG leaks a considerable amount of information on the program's structure. In this work we propose a method allowing to re-write a code P into a functionally equivalent code P' such that CFG{P} and CFG{P'} are radically different.

  6. A Structural Weight Estimation Program (SWEEP) for Air craft. Volume 7 - Fuselage Module. Appendix A: Module Flow Charts and FORTRAN Lists. Appendix B: Fuselage Module Sample Output

    Science.gov (United States)

    1974-06-01

    loonm m.oo «OS 100W.ll 1JJ .07 «to ■OMMtl in.oo »tl «OOUWI in.io «Of ■OOIMI m.n «01 I00W.71 in.if 500 lOOIVMl i.i.II SOI • OOJHOI in. is SOf...tCCT (JKUP.KK.im.il 70»»SIH 70»»»IT0 T0»»»ITI T0»»llt0 70»»4lt0 T0»»U00 1B»»WI0 T0»»M20 TD »»U10 70»»S1»0 70»»»J»0 J9W UlllClt.ttOI 1990 MO

  7. Stream Flow Prediction by Remote Sensing and Genetic Programming

    Science.gov (United States)

    Chang, Ni-Bin

    2009-01-01

    A genetic programming (GP)-based, nonlinear modeling structure relates soil moisture with synthetic-aperture-radar (SAR) images to present representative soil moisture estimates at the watershed scale. Surface soil moisture measurement is difficult to obtain over a large area due to a variety of soil permeability values and soil textures. Point measurements can be used on a small-scale area, but it is impossible to acquire such information effectively in large-scale watersheds. This model exhibits the capacity to assimilate SAR images and relevant geoenvironmental parameters to measure soil moisture.

  8. FLUT - A program for aeroelastic stability analysis. [of aircraft structures in subsonic flow

    Science.gov (United States)

    Johnson, E. H.

    1977-01-01

    A computer program (FLUT) that can be used to evaluate the aeroelastic stability of aircraft structures in subsonic flow is described. The algorithm synthesizes data from a structural vibration analysis with an unsteady aerodynamics analysis and then performs a complex eigenvalue analysis to assess the system stability. The theoretical basis of the program is discussed with special emphasis placed on some innovative techniques which improve the efficiency of the analysis. User information needed to efficiently and successfully utilize the program is provided. In addition to identifying the required input, the flow of the program execution and some possible sources of difficulty are included. The use of the program is demonstrated with a listing of the input and output for a simple example.

  9. Air Emissions Sources, Charts and Maps

    Data.gov (United States)

    U.S. Environmental Protection Agency — Air Emissions provides (1) interactive charts supporting national, state, or county charts, (2) county maps of criteria air pollutant emissions for a state, and (3)...

  10. NOAA Seamless Raster Navigational Charts (RNC)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA Seamless Raster Chart Server provides a seamless collarless mosaic of the NOAA Raster Navigational Charts (RNC). The RNC are a collection of approximately...

  11. 7 CFR 51.2946 - Color chart.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Color chart. 51.2946 Section 51.2946 Agriculture... Standards for Grades of Walnuts in the Shell General § 51.2946 Color chart. The color chart (USDA Walnut Color Chart) to which reference is made in §§ 51.2948, 51.2949, 51.2950, 51.2954, and 51.2963...

  12. Statistical Tests for Comparing Pareto Charts

    Directory of Open Access Journals (Sweden)

    Przemyslaw Grzegorzewski

    2012-09-01

    Full Text Available The Pareto chart is one of the most useful of the "magnificent seven", i.e. of the seven major SPC problem-solving tools. Sometimes a decision-maker is interested whether two Pareto charts corresponding to different processes differs significantly. In the present paper a new statistical test for comparing Pareto charts is suggested.

  13. Progress in the technology of nautical charting

    Digital Repository Service at National Institute of Oceanography (India)

    Joseph, A.

    the geographical information pertaining to the sea and the coastal water bodies was recorded on paper chart, on a miniature scale, for ready use by the mariners for marine navigational applications, and therefore the chart came to be known as "nautical chart...

  14. A Robust Control Chart for Monitoring Dispersion

    OpenAIRE

    Zhou, Maoyuan; Geng, Wei

    2013-01-01

    Most robust control charts in the literature are for monitoring process location parameters, such as mean or median, rather than process dispersion parameters. This paper develops a new robust control chart by integrating a two-sample nonparametric test into the effective change-point model. Our proposed chart is easy in computation, convenient to use, and very powerful in detecting process dispersion shifts.

  15. Conceptual plan: Two-Phase Flow Laboratory Program for the Waste Isolation Pilot Plant

    Energy Technology Data Exchange (ETDEWEB)

    Howarth, S.M.

    1993-07-01

    The Salado Two-Phase Flow Laboratory Program was established to address concerns regarding two-phase flow properties and to provide WIPP-specific, geologically consistent experimental data to develop more appropriate correlations for Salado rock to replace those currently used in Performance Assessment models. Researchers in Sandia`s Fluid Flow and Transport Department originally identified and emphasized the need for laboratory measurements of Salado threshold pressure and relative permeability. The program expanded to include the measurement of capillary pressure, rock compressibility, porosity, and intrinsic permeability and the assessment of core damage. Sensitivity analyses identified the anhydrite interbed layers as the most likely path for the dissipation of waste-generated gas from waste-storage rooms because of their relatively high permeability. Due to this the program will initially focus on the anhydrite interbed material. The program may expand to include similar rock and flow measurements on other WIPP materials including impure halite, pure halite, and backfill and seal materials. This conceptual plan presents the scope, objectives, and historical documentation of the development of the Salado Two-Phase Flow Program through January 1993. Potential laboratory techniques for assessing core damage and measuring porosity, rock compressibility, capillary and threshold pressure, permeability as a function of stress, and relative permeability are discussed. Details of actual test designs, test procedures, and data analysis are not included in this report, but will be included in the Salado Two-Phase Flow Laboratory Program Test Plan pending the results of experimental and other scoping activities in FY93.

  16. 40 CFR 86.343-79 - Chart reading.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Chart reading. 86.343-79 Section 86.343-79 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... reading. (a) A computer or any other automatic data processing device(s) may be used as long as the system...

  17. US Nuclear Regulatory Commission organization charts and functional statements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-19

    This document is the organizational chart for the US NRC. It contains organizational structure and functional statements for the following: (1) the Commission, (2) committees and boards, (3) staff offices, (4) office of the Inspector General, (5) executive director for operations, (6) program offices, and (7) regional offices.

  18. IDAHO NATIONAL LABORATORY PROGRAM TO OBTAIN BENCHMARK DATA ON THE FLOW PHENOMENA IN A SCALED MODEL OF A PRISMATIC GAS-COOLED REACTOR LOWER PLENUM FOR THE VALIDATION OF CFD CODES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh M. McIlroy Jr.; Donald M. McEligot; Robert J. Pink

    2008-09-01

    The experimental program that is being conducted at the Matched Index-of-Refraction (MIR) Flow Facility at Idaho National Laboratory (INL) to obtain benchmark data on measurements of flow phenomena in a scaled model of a typical prismatic gas-cooled (GCR) reactor lower plenum using 3-D Particle Image Velocimetry (PIV) is presented. A detailed description of the model, scaling, the experimental facility, 3-D PIV system, measurement uncertainties and analysis, experimental procedures and samples of the data sets that have been obtained are included. Samples of the data set that are presented include mean-velocity-field and turbulence data in an approximately 1:7 scale model of a region of the lower plenum of a typical prismatic GCR design. This experiment has been selected as the first Standard Problem endorsed by the Generation IV International Forum. Results concentrate on the region of the lower plenum near its far reflector wall (away from the outlet duct). Inlet jet Reynolds numbers (based on the jet diameter and the time-mean average flow rate) are approximately 4,300 and 12,400. The measurements reveal undeveloped, non-uniform flow in the inlet jets and complicated flow patterns in the model lower plenum. Data include three-dimensional vector plots, data displays along the coordinate planes (slices) and charts that describe the component flows at specific regions in the model. Information on inlet flow is also presented.

  19. DORCA 2 computer program. Volume 2: Programmer's manual

    Science.gov (United States)

    Gold, B. J.

    1972-01-01

    A guide for coding the Dynamic Operational Requirements and Cost Analysis Program (DORCA 2) is presented. The manual provides a detailed operation of every subroutine, the layout in core of the major matrices and arrays, and the meaning of all program values. Flow charts are included.

  20. Forecasting Shaharchay River Flow in Lake Urmia Basin using Genetic Programming and M5 Model Tree

    Directory of Open Access Journals (Sweden)

    S. Samadianfard

    2017-01-01

    Full Text Available Introduction: Precise prediction of river flows is the key factor for proper planning and management of water resources. Thus, obtaining the reliable methods for predicting river flows has great importance in water resource engineering. In the recent years, applications of intelligent methods such as artificial neural networks, fuzzy systems and genetic programming in water science and engineering have been grown extensively. These mentioned methods are able to model nonlinear process of river flows without any need to geometric properties. A huge number of studies have been reported in the field of using intelligent methods in water resource engineering. For example, Noorani and Salehi (23 presented a model for predicting runoff in Lighvan basin using adaptive neuro-fuzzy network and compared the performance of it with neural network and fuzzy inference methods in east Azerbaijan, Iran. Nabizadeh et al. (21 used fuzzy inference system and adaptive neuro-fuzzy inference system in order to predict river flow in Lighvan river. Khalili et al. (13 proposed a BL-ARCH method for prediction of flows in Shaharchay River in Urmia. Khu et al. (16 used genetic programming for runoff prediction in Orgeval catchment in France. Firat and Gungor (11 evaluated the fuzzy-neural model for predicting Mendes river flow in Turkey. The goal of present study is comparing the performance of genetic programming and M5 model trees for prediction of Shaharchay river flow in the basin of Lake Urmia and obtaining a comprehensive insight of their abilities. Materials and Methods: Shaharchay river as a main source of providing drinking water of Urmia city and agricultural needs of surrounding lands and finally one of the main input sources of Lake Urmia is quite important in the region. For obtaining the predetermined goals of present study, average monthly flows of Shaharchay River in Band hydrometric station has been gathered from 1951 to 2011. Then, two third of mentioned

  1. A Generalized Fluid System Simulation Program to Model Flow Distribution in Fluid Networks

    Science.gov (United States)

    Majumdar, Alok; Bailey, John W.; Schallhorn, Paul; Steadman, Todd

    1998-01-01

    This paper describes a general purpose computer program for analyzing steady state and transient flow in a complex network. The program is capable of modeling phase changes, compressibility, mixture thermodynamics and external body forces such as gravity and centrifugal. The program's preprocessor allows the user to interactively develop a fluid network simulation consisting of nodes and branches. Mass, energy and specie conservation equations are solved at the nodes; the momentum conservation equations are solved in the branches. The program contains subroutines for computing "real fluid" thermodynamic and thermophysical properties for 33 fluids. The fluids are: helium, methane, neon, nitrogen, carbon monoxide, oxygen, argon, carbon dioxide, fluorine, hydrogen, parahydrogen, water, kerosene (RP-1), isobutane, butane, deuterium, ethane, ethylene, hydrogen sulfide, krypton, propane, xenon, R-11, R-12, R-22, R-32, R-123, R-124, R-125, R-134A, R-152A, nitrogen trifluoride and ammonia. The program also provides the options of using any incompressible fluid with constant density and viscosity or ideal gas. Seventeen different resistance/source options are provided for modeling momentum sources or sinks in the branches. These options include: pipe flow, flow through a restriction, non-circular duct, pipe flow with entrance and/or exit losses, thin sharp orifice, thick orifice, square edge reduction, square edge expansion, rotating annular duct, rotating radial duct, labyrinth seal, parallel plates, common fittings and valves, pump characteristics, pump power, valve with a given loss coefficient, and a Joule-Thompson device. The system of equations describing the fluid network is solved by a hybrid numerical method that is a combination of the Newton-Raphson and successive substitution methods. This paper also illustrates the application and verification of the code by comparison with Hardy Cross method for steady state flow and analytical solution for unsteady flow.

  2. Programmer's guide for the GNAT computer program (numerical analysis of stratification in supercritical oxygen)

    Science.gov (United States)

    Heinmiller, J. P.

    1971-01-01

    This document is the programmer's guide for the GNAT computer program developed under MSC/TRW Task 705-2, Apollo cryogenic storage system analysis, subtask 2, is reported. Detailed logic flow charts and compiled program listings are provided for all program elements.

  3. Computer program for calculating supersonic flow on the windward side conical delta wings by the method of lines

    Science.gov (United States)

    Klunker, E. B.; South, J. C., Jr.; Davis, R. M.

    1972-01-01

    A user's manual is presented for a program that calculates the supersonic flow on the windward side of conical delta wings with shock attached at the sharp leading edge by the method of lines. The program also has a limited capability for computing the flow about circular and elliptic cones at incidence. It provides information including the shock shape, flow field, isentropic surface-flow properties, and force coefficients. A description of the program operation, a sample computation, and a FORTRAN 4 program listing are included.

  4. An Excel Add-In for Statistical Process Control Charts

    Directory of Open Access Journals (Sweden)

    Samuel E. Buttrey

    2009-06-01

    Full Text Available t shifts in processes in, for example, manufacturing. Among these are control charts".Control charts and other SPC techniques have been in use since at least the 1950s, and,because they are comparatively unsophisticated, are often used by management or op-erations personnel without formal statistical training. These personnel will often haveexperience with the popular spreadsheet program Excel, but may have less training on amainstream statistical package. Base Excel does not provide the ability to draw controlcharts directly, although add-ins for that purpose are available for purchase.We present a free add-in for Excel that draws the most common sorts of control charts.It follows the development of the textbook of Montgomery (2005, so it may be well-suited for instructional purposes.

  5. Growth charts for children with Ellis-van Creveld syndrome.

    Science.gov (United States)

    Verbeek, Sabine; Eilers, Paul H C; Lawrence, Kate; Hennekam, Raoul C M; Versteegh, Florens G A

    2011-02-01

    Ellis-van Creveld (EvC) syndrome is a congenital malformation syndrome with marked growth retardation. In this study, specific growth charts for EvC patients were derived to allow better follow-up of growth and earlier detection of growth patterns unusual for EvC. With the use of 235 observations of 101 EvC patients (49 males, 52 females), growth charts for males and females from 0 to 20 years of age were derived. Longitudinal and cross-sectional data were collected from an earlier review of growth data in EvC, a database of EvC patients, and from recent literature. To model the growth charts, the GAMLSS package for the R statistical program was used. Height of EvC patients was compared to healthy children using Dutch growth charts. Data are presented both on a scale for age and on a scale for the square root of age. Compared to healthy Dutch children, mean height standard deviation score values for male and female EvC patients were -3.1 and -3.0, respectively. The present growth charts should be useful in the follow-up of EvC patients. Most importantly, early detection of growth hormone deficiency, known to occur in EvC, will be facilitated.

  6. How to generate and interpret fire characteristics charts for surface and crown fire behavior

    Science.gov (United States)

    Patricia L. Andrews; Faith Ann Heinsch; Luke Schelvan

    2011-01-01

    A fire characteristics chart is a graph that presents primary related fire behavior characteristics-rate of spread, flame length, fireline intensity, and heat per unit area. It helps communicate and interpret modeled or observed fire behavior. The Fire Characteristics Chart computer program plots either observed fire behavior or values that have been calculated by...

  7. Growth charts: A diagnostic tool.

    Science.gov (United States)

    Khadilkar, Vaman; Khadilkar, Anuradha

    2011-09-01

    Assessment of growth by objective anthropometric methods is crucial in child care. India is in a phase of nutrition transition and thus it is vital to update growth references regularly. To review growth standards and references for assessment of physical growth of Indian children for clinical use and research purposes. Basics of growth charts and importance of anthropometric measurements are described. A comparison between growth standards and references is provided. Further, Indian growth reference curves based on the data collected by Agarwal et al. and adopted by the Indian Academy of Pediatrics, World Health Organization growth standards for children under the age of 5 years (2006) and contemporary Indian growth references published on apparently healthy affluent Indian children (data collected in 2007-08) are discussed. The article also discusses the use of adult equivalent body mass index (BMI) cut-offs for screening for overweight and obesity in Indian children. For the assessment of height, weight and BMI, WHO growth standards (for children excel macro for calculating SD scores can be obtained from the author (email: vamankhadilkar@gmail.com). Contemporary growth charts can be obtained by sending a message to 08861201183 or email: gntd@novonordisk.com.

  8. SEWER-SEDIMENT CONTROL: OVERVIEW OF AN EPA WET-WEATHER FLOW RESEARCH PROGRAM

    Science.gov (United States)

    This paper presents a historical overview of the sewer sediment control projects conducted by the Wet-Weather Flow Research Program of the USEPA. Research presented includes studies of the causes of sewer solids deposition and development/evaluation of control methods that can pr...

  9. Neurofibromatosis type 1 growth charts.

    Science.gov (United States)

    Clementi, M; Milani, S; Mammi, I; Boni, S; Monciotti, C; Tenconi, R

    1999-12-03

    Growth abnormalities such as macrocephaly and short stature have been described and are considered a consistent finding in neurofibromatosis type 1 (NF1), one of the most common autosomal dominant disorders in man. We present here a clinical study on the growth profile of a sample of NF1 patients collected through a population-based registry that covers three contiguous regions of North-East Italy (NEI-NF Registry). Auxometric traits of 528 NF1 patients have been measured with the aim of drawing growth charts for height, weight, and head circumference (OFC). Height velocity charts were based on a subset of 143 children who underwent multiple measurements. No differences in height were apparent between NF1 and normal subjects up to age 7 (girls) and 12 (boys) years; subsequently, the 50th centile of NF1 subjects tends to overlap with the 25th centile of normal subjects, and the 3rd centile is much lower in NF1 subjects than in normal subjects, mainly during adolescence. The negatively skewed distribution of height seems to indicate that height growth impairment affects only a proportion of NF1 subjects; height growth impairment does not seem related to disease severity. As for weight, our data suggest that slight overweight is a characteristic of adult NF1 subjects (mainly among males), independent of disease severity. Height growth velocity is normal during childhood for both sexes, whereas the pubertal spurt is slightly anticipated and reduced in NF1 boys but not in girls. Our data confirm previous observations that macrocrania affects most NF1 subjects; the shape of the head growth curve is similar in NF1 and normal girls, whereas NF1 boys present an OFC pubertal growth spurt much more pronounced and delayed than normal boys. The disproportion between OFC and height seems to be related to disease severity in boys but not in girls. Growth charts presented here can be useful in neurofibromatosis clinics for the identification of the effects of secondary growth

  10. Growth charts: A diagnostic tool

    Directory of Open Access Journals (Sweden)

    Vaman Khadilkar

    2011-01-01

    Full Text Available Context: Assessment of growth by objective anthropometric methods is crucial in child care. India is in a phase of nutrition transition and thus it is vital to update growth references regularly. Objective: To review growth standards and references for assessment of physical growth of Indian children for clinical use and research purposes. Materials and Methods: Basics of growth charts and importance of anthropometric measurements are described. A comparison between growth standards and references is provided. Further, Indian growth reference curves based on the data collected by Agarwal et al. and adopted by the Indian Academy of Pediatrics, World Health Organization growth standards for children under the age of 5 years (2006 and contemporary Indian growth references published on apparently healthy affluent Indian children (data collected in 2007-08 are discussed. The article also discusses the use of adult equivalent body mass index (BMI cut-offs for screening for overweight and obesity in Indian children. Results and Conclusions: For the assessment of height, weight and BMI, WHO growth standards (for children < 5 years and contemporary cross sectional reference percentile curves (for children from 5-18 years are available for clinical use and for research purposes. BMI percentiles (adjusted for the Asian adult BMI equivalent cut-offs for the assessment of physical growth of present day Indian children are also available. LMS values and Microsoft excel macro for calculating SD scores can be obtained from the author (email: vamankhadilkar@gmail.com. Contemporary growth charts can be obtained by sending a message to 08861201183 or email: gntd@novonordisk.com.

  11. FORTRAN programs for transient eddy current calculations using a perturbation-polynomial expansion technique

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, K.H.

    1976-11-01

    A description is given of FORTRAN programs for transient eddy current calculations in thin, non-magnetic conductors using a perturbation-polynomial expansion technique. Basic equations are presented as well as flow charts for the programs implementing them. The implementation is in two steps--a batch program to produce an intermediate data file and interactive programs to produce graphical output. FORTRAN source listings are included for all program elements, and sample inputs and outputs are given for the major programs.

  12. Live sequence charts to model medical information

    Directory of Open Access Journals (Sweden)

    Aslakson Eric

    2012-06-01

    Full Text Available Abstract Background Medical records accumulate data concerning patient health and the natural history of disease progression. However, methods to mine information systematically in a form other than an electronic health record are not yet available. The purpose of this study was to develop an object modeling technique as a first step towards a formal database of medical records. Method Live Sequence Charts (LSC were used to formalize the narrative text obtained during a patient interview. LSCs utilize a visual scenario-based programming language to build object models. LSC extends the classical language of UML message sequence charts (MSC, predominantly through addition of modalities and providing executable semantics. Inter-object scenarios were defined to specify natural history event interactions and different scenarios in the narrative text. Result A simulated medical record was specified into LSC formalism by translating the text into an object model that comprised a set of entities and events. The entities described the participating components (i.e., doctor, patient and record and the events described the interactions between elements. A conceptual model is presented to illustrate the approach. An object model was generated from data extracted from an actual new patient interview, where the individual was eventually diagnosed as suffering from Chronic Fatigue Syndrome (CFS. This yielded a preliminary formal designated vocabulary for CFS development that provided a basis for future formalism of these records. Conclusions Translation of medical records into object models created the basis for a formal database of the patient narrative that temporally depicts the events preceding disease, the diagnosis and treatment approach. The LSCs object model of the medical narrative provided an intuitive, visual representation of the natural history of the patient’s disease.

  13. Robust control charts in statistical process control

    OpenAIRE

    Nazir, H.Z.

    2014-01-01

    The presence of outliers and contaminations in the output of the process highly affects the performance of the design structures of commonly used control charts and hence makes them of less practical use. One of the solutions to deal with this problem is to use control charts which are robust against violations of the basic assumptions, like normality. The effect of using robust or other alternative estimators has not been investigated thoroughly in perspective of control charting literature....

  14. Variable Control Charts - Linear Failure Rate Distribution

    Directory of Open Access Journals (Sweden)

    Metlapalli Chaitanya Priya

    2017-12-01

    Full Text Available The well known Linear Failure Rate Distribution (LFRD is considered. A process variate following LFRD is thought of in order to develop control charts for subgroup mean and subgroup range. In view of the limitations on LFRD the theoretical control limits are obtained through some approximations and the resulting control chart limits are worked out. Comparisons with the control limits of similar variable control charts is also presented.

  15. PHAST Version 2-A Program for Simulating Groundwater Flow, Solute Transport, and Multicomponent Geochemical Reactions

    Science.gov (United States)

    Parkhurst, David L.; Kipp, Kenneth L.; Charlton, Scott R.

    2010-01-01

    The computer program PHAST (PHREEQC And HST3D) simulates multicomponent, reactive solute transport in three-dimensional saturated groundwater flow systems. PHAST is a versatile groundwater flow and solute-transport simulator with capabilities to model a wide range of equilibrium and kinetic geochemical reactions. The flow and transport calculations are based on a modified version of HST3D that is restricted to constant fluid density and constant temperature. The geochemical reactions are simulated with the geochemical model PHREEQC, which is embedded in PHAST. Major enhancements in PHAST Version 2 allow spatial data to be defined in a combination of map and grid coordinate systems, independent of a specific model grid (without node-by-node input). At run time, aquifer properties are interpolated from the spatial data to the model grid; regridding requires only redefinition of the grid without modification of the spatial data. PHAST is applicable to the study of natural and contaminated groundwater systems at a variety of scales ranging from laboratory experiments to local and regional field scales. PHAST can be used in studies of migration of nutrients, inorganic and organic contaminants, and radionuclides; in projects such as aquifer storage and recovery or engineered remediation; and in investigations of the natural rock/water interactions in aquifers. PHAST is not appropriate for unsaturated-zone flow, multiphase flow, or density-dependent flow. A variety of boundary conditions are available in PHAST to simulate flow and transport, including specified-head, flux (specified-flux), and leaky (head-dependent) conditions, as well as the special cases of rivers, drains, and wells. Chemical reactions in PHAST include (1) homogeneous equilibria using an ion-association or Pitzer specific interaction thermodynamic model; (2) heterogeneous equilibria between the aqueous solution and minerals, ion exchange sites, surface complexation sites, solid solutions, and gases; and

  16. Modeling of Compressible Flow with Friction and Heat Transfer Using the Generalized Fluid System Simulation Program (GFSSP)

    Science.gov (United States)

    Bandyopadhyay, Alak; Majumdar, Alok

    2007-01-01

    The present paper describes the verification and validation of a quasi one-dimensional pressure based finite volume algorithm, implemented in Generalized Fluid System Simulation Program (GFSSP), for predicting compressible flow with friction, heat transfer and area change. The numerical predictions were compared with two classical solutions of compressible flow, i.e. Fanno and Rayleigh flow. Fanno flow provides an analytical solution of compressible flow in a long slender pipe where incoming subsonic flow can be choked due to friction. On the other hand, Raleigh flow provides analytical solution of frictionless compressible flow with heat transfer where incoming subsonic flow can be choked at the outlet boundary with heat addition to the control volume. Nonuniform grid distribution improves the accuracy of numerical prediction. A benchmark numerical solution of compressible flow in a converging-diverging nozzle with friction and heat transfer has been developed to verify GFSSP's numerical predictions. The numerical predictions compare favorably in all cases.

  17. Electronic applications of the Smith chart

    CERN Document Server

    Smith, Phillip

    1995-01-01

    The legendary Smith chart inventor's classic reference book describes how the chart is used for designing lumped element and transmission line circuits. Provides tutorial material on transmission line theory and behavior, circuit representation on the chart, matching networks, network transformations and broadband matching. Includes a new chapter with examples designs and description of the winSMITH software accessory. Many computational instruments have succumbed to the power of the digital computer. This is not the case with the Smith Chart. A testament to Phil's genius is that his Smith Cha

  18. SAFSIM input manual: A computer program for the engineering simulation of flow systems

    Science.gov (United States)

    Dobranich, D.

    1992-09-01

    SAFSIM (System Analysis Flow Simulator) is a FORTRAN computer program to simulate the integrated performance of systems involving fluid mechanics, heat transfer, and reactor dynamics. SAFSIM provides sufficient versatility to allow the engineering simulation of almost any system, from a backyard sprinkler system to a clustered nuclear reactor propulsion system. In addition to versatility, speed and robustness are primary goals of SAFSIM. SAFSIM contains three basic physics modules: (1) a one-dimensional finite element fluid mechanics module with multiple flow network capability; (2) a one-dimensional finite element structure heat transfer module with multiple convection and radiation exchange surface capability; and (3) a point reactor dynamics module with reactivity feedback and decay heat capability. SAFSIM can be used for gas (compressible) or liquid (incompressible) single-phase flow systems with primary emphasis on gases (or supercritical fluids). This document contains a description of all the information required to create an input file for SAFSIM execution.

  19. Synthesis of Biochemical Applications on Flow-Based Microfluidic Biochips using Constraint Programming

    DEFF Research Database (Denmark)

    Minhass, Wajid Hassan; Pop, Paul; Madsen, Jan

    2012-01-01

    Microfluidic biochips are replacing the conventional biochemical analyzers and are able to integrate the necessary functions for biochemical analysis on-chip. In this paper we are interested in flow-based biochips, in which the flow of liquid is manipulated using integrated microvalves....... By combining several microvalves, more complex units, such as micropumps, switches, mixers, and multiplexers, can be built. We propose a constraint programming (CP) based approach for the synthesis of biochemical applications on flow-based microfluidic biochips. We use a sequencing graph to model...... the biochemical application and consider that the biochip architecture is given. We model the architecture using a topology graph. We are interested in synthesizing an implementation, consisting of binding and scheduling of the biochemical operations onto the components of the architecture, such that the resource...

  20. On the Calibration of Multigene Genetic Programming to Simulate Low Flows in the Moselle River

    Directory of Open Access Journals (Sweden)

    Ali DANANDEH MEHR

    2016-12-01

    Full Text Available The aim of this paper is to calibrate a data-driven model to simulate Moselle River flows and compare the performance with three different hydrologic models from a previous study. For consistency a similar set up and error metric are used to evaluate the model results. Precipitation, potential evapotranspiration and streamflow from previous day have been used as inputs. Based on the calibration and validation results, the proposed multigene genetic programming model is the best performing model among four models. The timing and the magnitude of extreme low flow events could be captured even when we use root mean squared error as the objective function for model calibration. Although the model is developed and calibrated for Moselle River flows, the multigene genetic algorithm offers a great opportunity for hydrologic prediction and forecast problems in the river basins with scarce data issues.

  1. Petri Nets Based Modelling of Control Flow for Memory-Aid Interactive Programs in Telemedicine

    CERN Document Server

    Khoromskaia, V K

    2004-01-01

    Petri Nets (PN) based modelling of the control flow for the interactive memory assistance programs designed for personal pocket computers and having special requirements for robustness is considered. The proposed concept allows one to elaborate the programs which can give users a variety of possibilities for a day-time planning in the presence of environmental and time restrictions. First, a PN model for a known simple algorithm is constructed and analyzed using the corresponding state equations and incidence matrix. Then a PN graph for a complicated algorithm with overlapping actions and choice possibilities is designed, supplemented by an example of its analysis. Dynamic behaviour of this graph is tested by tracing of all possible paths of the flow of control using the PN simulator. It is shown that PN based modelling provides reliably predictable performance of interactive algorithms with branched structures and concurrency requirements.

  2. MP Salsa: a finite element computer program for reacting flow problems. Part 1--theoretical development

    Energy Technology Data Exchange (ETDEWEB)

    Shadid, J.N.; Moffat, H.K.; Hutchinson, S.A.; Hennigan, G.L.; Devine, K.D.; Salinger, A.G.

    1996-05-01

    The theoretical background for the finite element computer program, MPSalsa, is presented in detail. MPSalsa is designed to solve laminar, low Mach number, two- or three-dimensional incompressible and variable density reacting fluid flows on massively parallel computers, using a Petrov-Galerkin finite element formulation. The code has the capability to solve coupled fluid flow, heat transport, multicomponent species transport, and finite-rate chemical reactions, and to solver coupled multiple Poisson or advection-diffusion- reaction equations. The program employs the CHEMKIN library to provide a rigorous treatment of multicomponent ideal gas kinetics and transport. Chemical reactions occurring in the gas phase and on surfaces are treated by calls to CHEMKIN and SURFACE CHEMKIN, respectively. The code employs unstructured meshes, using the EXODUS II finite element data base suite of programs for its input and output files. MPSalsa solves both transient and steady flows by using fully implicit time integration, an inexact Newton method and iterative solvers based on preconditioned Krylov methods as implemented in the Aztec solver library.

  3. PHAST--a program for simulating ground-water flow, solute transport, and multicomponent geochemical reactions

    Science.gov (United States)

    Parkhurst, David L.; Kipp, Kenneth L.; Engesgaard, Peter; Charlton, Scott R.

    2004-01-01

    The computer program PHAST simulates multi-component, reactive solute transport in three-dimensional saturated ground-water flow systems. PHAST is a versatile ground-water flow and solute-transport simulator with capabilities to model a wide range of equilibrium and kinetic geochemical reactions. The flow and transport calculations are based on a modified version of HST3D that is restricted to constant fluid density and constant temperature. The geochemical reactions are simulated with the geochemical model PHREEQC, which is embedded in PHAST. PHAST is applicable to the study of natural and contaminated ground-water systems at a variety of scales ranging from laboratory experiments to local and regional field scales. PHAST can be used in studies of migration of nutrients, inorganic and organic contaminants, and radionuclides; in projects such as aquifer storage and recovery or engineered remediation; and in investigations of the natural rock-water interactions in aquifers. PHAST is not appropriate for unsaturated-zone flow, multiphase flow, density-dependent flow, or waters with high ionic strengths. A variety of boundary conditions are available in PHAST to simulate flow and transport, including specified-head, flux, and leaky conditions, as well as the special cases of rivers and wells. Chemical reactions in PHAST include (1) homogeneous equilibria using an ion-association thermodynamic model; (2) heterogeneous equilibria between the aqueous solution and minerals, gases, surface complexation sites, ion exchange sites, and solid solutions; and (3) kinetic reactions with rates that are a function of solution composition. The aqueous model (elements, chemical reactions, and equilibrium constants), minerals, gases, exchangers, surfaces, and rate expressions may be defined or modified by the user. A number of options are available to save results of simulations to output files. The data may be saved in three formats: a format suitable for viewing with a text editor; a

  4. Software tool for physics chart checks.

    Science.gov (United States)

    Li, H Harold; Wu, Yu; Yang, Deshan; Mutic, Sasa

    2014-01-01

    Physics chart check has long been a central quality assurance (QC) measure in radiation oncology. The purpose of this work is to describe a software tool that aims to accomplish simplification, standardization, automation, and forced functions in the process. Nationally recognized guidelines, including American College of Radiology and American Society for Radiation Oncology guidelines and technical standards, and the American Association of Physicists in Medicine Task Group reports were identified, studied, and summarized. Meanwhile, the reported events related to physics chart check service were analyzed using an event reporting and learning system. A number of shortfalls in the chart check process were identified. To address these problems, a software tool was designed and developed under Microsoft. Net in C# to hardwire as many components as possible at each stage of the process. The software consists of the following 4 independent modules: (1) chart check management; (2) pretreatment and during treatment chart check assistant; (3) posttreatment chart check assistant; and (4) quarterly peer-review management. The users were a large group of physicists in the author's radiation oncology clinic. During over 1 year of use the tool has proven very helpful in chart checking management, communication, documentation, and maintaining consistency. The software tool presented in this work aims to assist physicists at each stage of the physics chart check process. The software tool is potentially useful for any radiation oncology clinics that are either in the process of pursuing or maintaining the American College of Radiology accreditation.

  5. Robust control charts in statistical process control

    NARCIS (Netherlands)

    Nazir, H.Z.

    2014-01-01

    The presence of outliers and contaminations in the output of the process highly affects the performance of the design structures of commonly used control charts and hence makes them of less practical use. One of the solutions to deal with this problem is to use control charts which are robust

  6. New corrections for old control charts

    NARCIS (Netherlands)

    Albers, Willem/Wim; Kallenberg, W.C.M.

    2003-01-01

    When using standard control charts, typically several parameters need to be estimated. For the usual sample sizes, this is known to affect the performance of the chart. Here we present simple corrections to solve this problem. As a basis we use existing factors which are widely used for the

  7. 47 CFR 73.333 - Engineering charts.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Engineering charts. 73.333 Section 73.333 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.333 Engineering charts. This section consists of the following Figures 1, 1a, 2, and...

  8. Obtaining the Andersen's chart, triangulation algorithm

    DEFF Research Database (Denmark)

    Sabaliauskas, Tomas; Ibsen, Lars Bo

    Andersen’s chart (Andersen & Berre, 1999) is a graphical method of observing cyclic soil response. It allows observing soil response to various stress amplitudes that can lead to liquefaction, excess plastic deformation or stabilizing soil response. The process of obtaining the original chart has...

  9. SMART AERONAUTICAL CHART MANAGEMENT SYSTEM DESIGN

    Directory of Open Access Journals (Sweden)

    M. E. Pakdil

    2015-10-01

    Full Text Available Civil aviation is developing rapidly, and the number of domestic and international operations is increasing exponentially every year than the previous one. Airline companies with increased air traffic and the number of passengers increase the demand of new aircrafts. An aircraft needs not only fuel but also pilot and aeronautical information (charts, digital navigation information, flight plan, and etc. to perform flight operation. One of the most important components in aeronautical information is the terminal chart. Authorized institution in every state is responsible to publish their terminal charts for certain periods. Although these charts are produced in accordance with ICAO’s Annex 4 and Annex 15, cartographic representation and page layout differs in each state’s publication. This situation makes difficult to read them by pilots. In this paper, standard instrument departure (SID charts are analysed to produce by use of cutting-edge and competitive technologies instead of classical computer-aided drawing and vector based graphic applications that are currently used by main chart producers. The goal is to design efficient and commercial chart management system that is able to produce aeronautical charts with same cartographic representation for all states.

  10. Robust CUSUM control charting for process dispersion

    NARCIS (Netherlands)

    Nazir, H.Z.; Riaz, M.; Does, R.J.M.M.

    2015-01-01

    Process monitoring through control charts is a quite popular practice in statistical process control. From a statistical point of view, a superior control chart is one that has an efficient design structure, but having resistance against unusual situations is of more practical importance. To have a

  11. 49 CFR 236.718 - Chart, dog.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Chart, dog. 236.718 Section 236.718 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.718 Chart, dog. A...

  12. Color Charts, Esthetics, and Subjective Randomness

    Science.gov (United States)

    Sanderson, Yasmine B.

    2012-01-01

    Color charts, or grids of evenly spaced multicolored dots or squares, appear in the work of modern artists and designers. Often the artist/designer distributes the many colors in a way that could be described as "random," that is, without an obvious pattern. We conduct a statistical analysis of 125 "random-looking" art and design color charts and…

  13. Robust Control Charts for Time Series Data

    NARCIS (Netherlands)

    Croux, C.; Gelper, S.; Mahieu, K.

    2010-01-01

    This article presents a control chart for time series data, based on the one-step- ahead forecast errors of the Holt-Winters forecasting method. We use robust techniques to prevent that outliers affect the estimation of the control limits of the chart. Moreover, robustness is important to maintain

  14. Flow

    DEFF Research Database (Denmark)

    2009-01-01

    Flow er en positiv, koncentreret tilstand, hvor al opmærksomhed er samlet om en bestemt aktivitet, som er så krævende og engagerende, at man må anvende mange mentale ressourcer for at klare den. Tidsfornemmelsen forsvinder, og man glemmer sig selv. 'Flow' er den første af en række udsendelser om...

  15. A Structural Weight Estimation Program (SWEEP) for Aircraft. Volume 6 - Wing and Empennage Module. Appendix A: General Information for Module Flow Charts and Listings. Appendix B: Program Flow Charts, Overlays (8,0), (14,0), (15,0), (16,0) and (17,0)

    Science.gov (United States)

    1974-06-01

    IH) 1.. TOCIVI • CUR "•11*» COV HIN OKCt «O UHt /lM) inm • SMcm «:J j TM»« • QlMI | I_ _J? 1016 IWM • IK»« 1017 /V...0’ ’ 1 | com KM jl 1511 I) » 10 N «JIOKOM CwWI VI - <xir Milk «fi irttKXU nXMI «««I 11 in NmrMXiORai sitiiUNis

  16. FusionCharts Beginner's Guide The Official Guide for FusionCharts Suite

    CERN Document Server

    Nadhani, Sanket; Bhattacharya, Shamasis

    2012-01-01

    The book is written as a practical, step-by-step guide to using FusionCharts Suite. The book not only teaches you the fundamentals and implementation of FusionCharts Suite, but also makes you the data visualization guru among your friends and colleagues by teaching how to select the right chart type and usability tips. Filled with examples, code samples and practical tips in a no-nonsense way, the book is a breeze to read.This book is both for beginners and advanced web developers who need to create interactive charts for their web applications. No previous knowledge of FusionCharts Suite is a

  17. Assessment model validity document. NAMMU: A program for calculating groundwater flow and transport through porous media

    Energy Technology Data Exchange (ETDEWEB)

    Cliffe, K.A.; Morris, S.T.; Porter, J.D. [AEA Technology, Harwell (United Kingdom)

    1998-05-01

    NAMMU is a computer program for modelling groundwater flow and transport through porous media. This document provides an overview of the use of the program for geosphere modelling in performance assessment calculations and gives a detailed description of the program itself. The aim of the document is to give an indication of the grounds for having confidence in NAMMU as a performance assessment tool. In order to achieve this the following topics are discussed. The basic premises of the assessment approach and the purpose of and nature of the calculations that can be undertaken using NAMMU are outlined. The concepts of the validation of models and the considerations that can lead to increased confidence in models are described. The physical processes that can be modelled using NAMMU and the mathematical models and numerical techniques that are used to represent them are discussed in some detail. Finally, the grounds that would lead one to have confidence that NAMMU is fit for purpose are summarised.

  18. The art and science of chart review.

    Science.gov (United States)

    Allison, J J; Wall, T C; Spettell, C M; Calhoun, J; Fargason, C A; Kobylinski, R W; Farmer, R; Kiefe, C

    2000-03-01

    Explicit chart review was an integral part of an ongoing national cooperative project, "Using Achievable Benchmarks of Care to Improve Quality of Care for Outpatients with Depression," conducted by a large managed care organization (MCO) and an academic medical center. Many investigators overlook the complexities involved in obtaining high-quality data. Given a scarcity of advice in the quality improvement (QI) literature on how to conduct chart review, the process of chart review was examined and specific techniques for improving data quality were proposed. The abstraction tool was developed and tested in a prepilot phase; perhaps the greatest problem detected was abstractor assumption and interpretation. The need for a clear distinction between symptoms of depression or anxiety and physician diagnosis of major depression or anxiety disorder also became apparent. In designing the variables for the chart review module, four key aspects were considered: classification, format, definition, and presentation. For example, issues in format include use of free-text versus numeric variables, categoric variables, and medication variables (which can be especially challenging for abstraction projects). Quantitative measures of reliability and validity were used to improve and maintain the quality of chart review data. Measuring reliability and validity offers assistance with development of the chart review tool, continuous maintenance of data quality throughout the production phase of chart review, and final documentation of data quality. For projects that require ongoing abstraction of large numbers of clinical records, data quality may be monitored with control charts and the principles of statistical process control. The chart review module, which contained 140 variables, was built using MedQuest software, a suite of tools designed for customized data collection. The overall interrater reliability increased from 80% in the prepilot phase to greater than 96% in the final

  19. The Usage of Time Series Control Charts for Financial Process Analysis

    Directory of Open Access Journals (Sweden)

    Kovářík Martin

    2012-09-01

    Full Text Available We will deal with financial proceedings of the company using methods of SPC (Statistical Process Control, specifically through time series control charts. The paper will outline the intersection of two disciplines which are econometrics and statistical process control. The theoretical part will discuss the methodology of time series control charts and in the research part there will be this methodology demonstrated in three case studies. The first study will focus on the regulation of simulated financial flows for a company by CUSUM control chart. The second study will involve the regulation of financial flows for a heteroskedastic financial process by EWMA control chart. The last case study of our paper will be devoted to applications of ARIMA, EWMA and CUSUM control charts in the financial data that are sensitive to the mean shifting while calculating the autocorrelation in the data. In this paper, we highlight the versatility of control charts not only in manufacturing but also in managing the financial stability of cash flows.

  20. A human factors approach to observation chart design can trump health professionals' prior chart experience.

    Science.gov (United States)

    Christofidis, Melany J; Hill, Andrew; Horswill, Mark S; Watson, Marcus O

    2013-05-01

    To determine whether experienced health professionals recognise patient deterioration more accurately and efficiently using (a) novel observation charts, designed from a human factors perspective, or (b) chart designs with which they have long-term experience. Participants were 101 health professionals experienced in using either a multiple parameter track-and-trigger chart or a graphical chart with no track-and-trigger system. Participants were presented with realistic abnormal and normal patient observations recorded on six hospital observation charts of varying design quality, including the chart that participants were familiar with (or a very similar design). Across 48 trials, the participant was asked to specify if any of the vital sign observations were abnormal, or if all of the observations were normal. Participants' overall error rates (i.e., proportion of incorrect responses) and response times, the main outcome measures, were calculated for each observation chart. Participants made significantly fewer errors and responded significantly faster when using a novel user-friendly chart compared with all the other designs, including the charts that they were experienced with in a clinical setting. The findings suggest that, at least in the contexts examined, superior observation chart design appears to trump familiarity. Hence, hospitals motivated to improve the detection of patient deterioration should implement charts designed from a human factors perspective, rather than simply maintaining the status quo of reliance on clinical experience. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  1. CLOCK CHART(®): a novel multi-stimulus self-check visual field screener.

    Science.gov (United States)

    Matsumoto, Chota; Eura, Mariko; Okuyama, Sachiko; Takada, Sonoko; Arimura-Koike, Eiko; Hashimoto, Shigeki; Tanabe, Fumi; Shimomura, Yoshikazu

    2015-05-01

    CLOCK CHART(®) is a multi-stimulus-type self-check visual field screening sheet developed by our group. The test chart is rotated during the examination, and the visual field abnormalities are pointed out by the patients themselves. In this study, we evaluated the clinical usefulness of this chart in patients with glaucoma. We studied 114 eyes of 114 glaucoma patients (average age 60.0 ± 11.1 years) and 45 eyes of 45 normal individuals (average age 45.0 ± 16.4 years) using CLOCK CHART(®). The static visual fields were obtained using the Octopus 101 G2 program and classified using the Aulhorn classification as modified by Greve (stages 0-I to IV) and by mean defect (MD; early 12 dB).The sensitivity and specificity of CLOCK CHART(®) for detecting visual field abnormalities were evaluated within the entire 25° field and at the 5°, 10°, 15°, 20°, and 25° eccentricity zones. The visual field agreement between the results of CLOCK CHART(®) and the static visual fields were also evaluated. In glaucomatous eyes, the sensitivity of CLOCK CHART(®) was 85, 93, and 100 % for Greve stages I, II and III-VI, respectively, and 87, 93, and 97 % for the MD value in early, moderate, and severe eyes, respectively. The agreement of the visual field defect area in CLOCK CHART(®) with the static fields was 85 and 100 % with Greve stages 0-I to I and II-VI, respectively, and 91, 96, and 96 % in early, moderate and severe glaucomatous eyes according to MD, respectively. The specificity of CLOCK CHART(®) was 89 %. CLOCK CHART(®) is a simple and reliable self-check screening chart for detecting visual field abnormalities in patients with glaucoma.

  2. Charting and Evaluation of Environmental Microbial Monitoring Data.

    Science.gov (United States)

    Bar, Raphael

    2015-01-01

    Statistical tools are required to organize and present microbial environmental monitoring data for the purpose of evaluating it against regulatory action limits and of determining if the microbial monitoring process is in a state of control. This paper applies a known methodology of a simple and straightforward construction of control XmR (X data and moving range) charts of individual microbial counts as they are or of contamination rates derived from them, irrespective of the type of the parent data distribution and without the need to transform the data into a normal distribution. Plotting of monthly and cumulative sample contamination rates, as newly suggested by USP , is also shown. Both types of the control charts and plots allow an evaluation of the behavior of the microbial monitoring process. After addressing the magnitude of microbial counts expected in environmental monitoring samples, this paper presents the rationale behind the use of XmR charts. Employing data taken from environmental monitoring programs of pharmaceuticals manufacturing facilities, this paper analyzes examples of (1) microbial counts from passive or active air sampling in area Grade D or B or Class 100,000 in XmR charts, (2) contamination recovery rates as suggested by USP from active air samples in area Grade B and contact plates in area Grade C, and (3) instantaneous contamination rates with calculations illustrated on microbial counts of contact plates in area Grade D. Pharmaceutical companies conduct environmental monitoring programs, and samples of air (active and passive sampling) and of surfaces (contact plates) are routinely tested for microbiological quality. Thus, hundreds of microbial counts of tested environmental monitoring samples are routinely generated and recorded. Statistical tools are required to organize and present this abundant data for the purpose of evaluating it against regulatory action limits and determining if the microbial monitoring process is a state of

  3. NASA Ares I Launch Vehicle First Stage Roll Control System Cold Flow Development Test Program Overview

    Science.gov (United States)

    Butt, Adam; Popp, Christopher G.; Holt, Kimberly A.; Pitts, Hank M.

    2010-01-01

    The Ares I launch vehicle is the selected design, chosen to return humans to the moon, Mars, and beyond. It is configured in two inline stages: the First Stage is a Space Shuttle derived five-segment Solid Rocket Booster and the Upper Stage is powered by a Saturn V derived J-2X engine. During launch, roll control for the First Stage (FS) is handled by a dedicated Roll Control System (RoCS) located on the connecting Interstage. That system will provide the Ares I with the ability to counteract induced roll torque while any induced yaw or pitch moments are handled by vectoring of the booster nozzle. This paper provides an overview of NASA s Ares I FS RoCS cold flow development test program including detailed test objectives, types of tests run to meet those objectives, an overview of the results, and applicable lessons learned. The test article was built and tested at the NASA Marshall Space Flight Center in Huntsville, AL. The FS RoCS System Development Test Article (SDTA) is a full scale, flight representative water flow test article whose primary objective was to obtain fluid system performance data to evaluate integrated system level performance characteristics and verify analytical models. Development testing and model correlation was deemed necessary as there is little historical precedent for similar large flow, pulsing systems such as the FS RoCS. The cold flow development test program consisted of flight-similar tanks, pressure regulators, and thruster valves, as well as plumbing simulating flight geometries, combined with other facility grade components and structure. Orifices downstream of the thruster valves were used to simulate the pressure drop through the thrusters. Additional primary objectives of this test program were to: evaluate system surge pressure (waterhammer) characteristics due to thruster valve operation over a range of mission duty cycles at various feed system pressures, evaluate temperature transients and heat transfer in the

  4. Chronic respiratory patient control by multivariate charts.

    Science.gov (United States)

    Correia, Florbela; Nêveda, Rui; Oliveira, Pedro

    2011-01-01

    This article seeks to explain how to monitor the chronic obstructive disease patient and control any complications so that timely treatment can be applied. Control charts and statistical process control (SPC) theory were used on chronic respiratory patient follow-up and control. Controlling several variables simultaneously, using univariate charts, can be misleading, more so when there are correlated variables, so multivariate and univariate control charts were studied. One-sided control charts are preferable when the aim is to detect changes in the mean solely in one direction. Thus, one-sided, univariate and multivariate charts were built, which identified previously undetected out-of-control events. The study's main limitation is its retrospective nature. However, following-up individual patients can highlight medical therapy effects. The article concludes that control charts, in particular one-sided ones, are a valuable tool for monitoring chronic respiratory patients, thus contributing to medical decision making. The article highlights control chart application to chronic respiratory patient follow-up, permitting a global view of patient evolution over time.

  5. Flow

    DEFF Research Database (Denmark)

    Knoop, Hans Henrik

    2006-01-01

    FLOW. Orden i hovedet på den fede måde Oplevelsesmæssigt er flow-tilstanden kendetegnet ved at man er fuldstændig involveret, fokuseret og koncentreret; at man oplever stor indre klarhed ved at vide hvad der skal gøres, og i hvilket omfang det lykkes; at man ved at det er muligt at løse opgaven...

  6. A Standardized Arabic Reading Acuity Chart: The Balsam Alabdulkader-Leat Chart.

    Science.gov (United States)

    Alabdulkader, Balsam; Leat, Susan J

    2017-08-01

    The aim of this study was to develop and validate the first standardized Arabic continuous text near-visual-acuity chart, the Balsam Alabdulkader-Leat (BAL) chart. Three versions of the BAL chart were created from previously validated sentences. Reading acuity (RA) and reading speed in standard-length words per minute (SLWPM) were measured for three versions of the BAL chart and three English charts (MNREAD, Colenbrander, and Radner) for 86 bilingual adults with normal vision aged 15 to 59 years. The RA and SLWPM were compared using analysis of variance. To analyze agreement between the charts, Bland-Altman plots were used. Normal visual acuity (0.00 logMAR [log minimum angle of resolution]) was calibrated for the BAL chart with linear regression analysis. Average RAs for BAL1, BAL2, and BAL3 were 0.62, 0.64 and 0.65 log-point print, respectively, which were statistically significantly different (repeated-measures analysis of variance, P charts were 0.054 (between 1 and 2), 0.061 (between 2 and 3), and 0.059 (between 1 and 3). Linear regression between the average RA for the BAL chart and the MNREAD and Radner charts showed that 0.7 log-point size at 40 cm is equivalent to 0.00 logMAR, and the new BAL chart was labeled accordingly. Mean SLWPM for the BAL charts was 201, 195, and 195 SLWPM, respectively, and for the Colenbrander, MNREAD, and Radner charts was 146, 171, and 146, respectively. The coefficients of agreement for log-SLWPM between BAL1 and BAL2, BAL2 and BAL3, and BAL1 and BAL3 were 0.063, 0.064, and 0.057 log-SLWPM, respectively. The BAL chart showed high interchart agreement. It is recommended for accurate near performance measures in Arabic for both research and clinical settings.

  7. 21 CFR 886.1150 - Visual acuity chart.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Visual acuity chart. 886.1150 Section 886.1150...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1150 Visual acuity chart. (a) Identification. A visual acuity chart is a device that is a chart, such as a Snellen chart with block letters or...

  8. SAFSIM theory manual: A computer program for the engineering simulation of flow systems

    Energy Technology Data Exchange (ETDEWEB)

    Dobranich, D.

    1993-12-01

    SAFSIM (System Analysis Flow SIMulator) is a FORTRAN computer program for simulating the integrated performance of complex flow systems. SAFSIM provides sufficient versatility to allow the engineering simulation of almost any system, from a backyard sprinkler system to a clustered nuclear reactor propulsion system. In addition to versatility, speed and robustness are primary SAFSIM development goals. SAFSIM contains three basic physics modules: (1) a fluid mechanics module with flow network capability; (2) a structure heat transfer module with multiple convection and radiation exchange surface capability; and (3) a point reactor dynamics module with reactivity feedback and decay heat capability. Any or all of the physics modules can be implemented, as the problem dictates. SAFSIM can be used for compressible and incompressible, single-phase, multicomponent flow systems. Both the fluid mechanics and structure heat transfer modules employ a one-dimensional finite element modeling approach. This document contains a description of the theory incorporated in SAFSIM, including the governing equations, the numerical methods, and the overall system solution strategies.

  9. Development of an electrical impedance computed tomographic two-phase flows analyzer. Annual technical report for program renewal

    Energy Technology Data Exchange (ETDEWEB)

    Jones, O.C.

    1993-05-01

    This progress report details the theoretical development, numerical results, experimental design (mechanical), experimental design (electronic), and experimental results for the research program for the development of an electrical impedance computed tomographic two-phase flow analyzer.

  10. Learning Based Approach for Optimal Clustering of Distributed Program's Call Flow Graph

    Science.gov (United States)

    Abofathi, Yousef; Zarei, Bager; Parsa, Saeed

    Optimal clustering of call flow graph for reaching maximum concurrency in execution of distributable components is one of the NP-Complete problems. Learning automatas (LAs) are search tools which are used for solving many NP-Complete problems. In this paper a learning based algorithm is proposed to optimal clustering of call flow graph and appropriate distributing of programs in network level. The algorithm uses learning feature of LAs to search in state space. It has been shown that the speed of reaching to solution increases remarkably using LA in search process, and it also prevents algorithm from being trapped in local minimums. Experimental results show the superiority of proposed algorithm over others.

  11. Use of Gene Expression Programming in regionalization of flow duration curve

    Science.gov (United States)

    Hashmi, Muhammad Z.; Shamseldin, Asaad Y.

    2014-06-01

    In this paper, a recently introduced artificial intelligence technique known as Gene Expression Programming (GEP) has been employed to perform symbolic regression for developing a parametric scheme of flow duration curve (FDC) regionalization, to relate selected FDC characteristics to catchment characteristics. Stream flow records of selected catchments located in the Auckland Region of New Zealand were used. FDCs of the selected catchments were normalised by dividing the ordinates by their median value. Input for the symbolic regression analysis using GEP was (a) selected characteristics of normalised FDCs; and (b) 26 catchment characteristics related to climate, morphology, soil properties and land cover properties obtained using the observed data and GIS analysis. Our study showed that application of this artificial intelligence technique expedites the selection of a set of the most relevant independent variables out of a large set, because these are automatically selected through the GEP process. Values of the FDC characteristics obtained from the developed relationships have high correlations with the observed values.

  12. Programs to obtain vertical heights from mean sea level and for computing volume of sand/mineral along beaches:A case study with Kalbadevi beach profiling data and results.

    Digital Repository Service at National Institute of Oceanography (India)

    Ganesan, P.

    II) Program for obtaining volume of sand / mineral along profiles from M.S.L. The listing of the software is given in Annexure: I and Annexure :2 of this report. LOGIC AND FLOW DIAGRAM The logic used in first program ?Program to obtain... data points from second set up = (HC1 ? successive staff readings observed from second set up) 5 The logical flow diagram is given below Fig.1 Flow chart for obtaining vertical heights with respect to mean sea...

  13. Enhancing Assessments of Mental Health Programs and Program Planning

    Science.gov (United States)

    2012-06-01

    300 studies are in progress. Some are close to completion.  RAND found major barriers to efficiency in DOD PH programs:  Proliferation: RAND... efficiency of the DC System:  Establish data systems to measure the probabilities at each major branch of the military and clinical flow charts shown in...significantly effective  One study showed acupuncture very effective 64 Only significant 1st and 2nd level categories are shown. – Watts, Schnurr et al

  14. Simulator program for load flow calculations and correct switching training; Simulationsprogramm fuer Netzberechnug und Schalttraining

    Energy Technology Data Exchange (ETDEWEB)

    Raschick, H.; Bernhardt, R. [Ingenieur- und Servicegesellschaft fuer Energie und Umwelt, Leipzig (Germany). Bereich Simulatorenentwicklung

    1997-10-20

    The following article describes a PC program package for the training of load switching in electrical power supply and distribution station under normal, critical and fault conditions. It contains load flow and short circuit calculation, station interlocking checking and protection device simulation. There exist a single user version as well as a multi user version intended for group switching training. (orig.) [Deutsch] Die Verfasser stellen ein PC-Programmsystem zum Training von Schalthandlungen in elektrischen Energieversorgungsanlagen unter Normal- und Ausnahmebedingungen vor. Es enhaelt Lastfluss- und Kurzschlussberechnung, Verriegelungsueberpruefung und Schutzemulation. Es ist sowohl eine Einzelplatz- als auch eine Mehrplatzversion zum Gruppenschalttraining verfuegbar. (orig.)

  15. Developing a Translator from C Programs to Data Flow Graphs Using RAISE

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth

    1996-01-01

    Describes how a translator from a subset of C to data flow graphs has been formally developed using the RAISE (Rigorous Approach to Industrial Software Engineering) method and tools. In contrast to many development examples described in the literature, this development is not a case study...... with the other components of LYCOS, provides a means for moving parts of C programs to dedicated hardware, thereby obtaining better performance. The translator was refined in steps, starting with an abstract specification and ending with a concrete specification from which C++ code was then automatically...

  16. Flood tracking chart, Amite River Basin, Louisiana

    Science.gov (United States)

    Callender, Lawrence E.; McCallum, Brian E.; Brazelton, Sebastian R.; Anderson, Mary L.; Ensminger, Paul A.

    1998-01-01

    The Amite River Basin flood tracking chart is designed to assist emergency response officials and the local public in making informed decisions about the safety of life and property during floods along the Amite and Comite Rivers and Bayou Manchac in southeastern Louisiana. This chart is similar in concept to the charts used to track hurricanes; the user can record the latest river stage information at selected gaging stations and the latest flood crest predictions. The latest stage data can be compared to historical flood peaks as well as to the slab or pier elevation of a threatened property. The chart also discusses how to acquire the latest river stage data from the Internet and a recorded voice message.

  17. Chart Supplements - Aeronautical Information Services Digital Products

    Data.gov (United States)

    Department of Transportation — The Chart Supplements are searchable by individual airport in PDF format. They contain data on public and joint use airports, seaplane bases, heliports, VFR airport...

  18. Automating the initial physics chart checking process

    National Research Council Canada - National Science Library

    Furhang, Eli E; Dolan, James; Sillanpaa, Jussi K; Harrison, Louis B

    2009-01-01

    The initial physics chart check, an essential quality assurance process, verifies that the physician intent is properly expressed in the treatment plan, the treatment plan is reasonable, and the Record and Verify (RV...

  19. Visualizing Library Statistics using Open Flash Chart 2 and Drupal

    Directory of Open Access Journals (Sweden)

    Laura K. Wiegand

    2013-01-01

    Full Text Available Libraries continue to need to demonstrate their value to stakeholders, and while statistics alone do not represent value, they are an important element. We found ourselves, and our stakeholders, uninspired by our infrequently updated bulleted list of statistics on our website and so set out to create a more dynamic and visually appealing look at our statistics. This article outlines how we used our content management system, Drupal, Open Flash Chart and custom programming to convert library statistics into Flash charts, including how to populate the graphs with dynamic data from external sources. The end result is our Library Statistics Dashboard (http://library.uncw.edu/facts_planning/dashboard that visually demonstrates the use, activity and resources in the library via interactive and visually interesting graphs.

  20. 77 FR 13683 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2012-03-07

    ... Federal Aviation Administration Government/Industry Aeronautical Charting Forum Meeting AGENCY: Federal...-annual meeting of the Federal Aviation Administration (FAA) Aeronautical Charting Forum (ACF) to discuss... Charting Forum. BILLING CODE M ...

  1. The retrospective chart review: important methodological considerations

    Directory of Open Access Journals (Sweden)

    Vassar Matt

    2013-11-01

    Full Text Available In this paper, we review and discuss ten common methodological mistakes found in retrospective chart reviews. The retrospective chart review is a widely applicable research methodology that can be used by healthcare disciplines as a means to direct subsequent prospective investigations. In many cases in this review, we have also provided suggestions or accessible resources that researchers can apply as a “best practices” guide when planning, conducting, or reviewing this investigative method.

  2. Structure and application of an interface program between a geographic-information system and a ground-water flow model

    Science.gov (United States)

    Van Metre, P.C.

    1990-01-01

    A computer-program interface between a geographic-information system and a groundwater flow model links two unrelated software systems for use in developing the flow models. The interface program allows the modeler to compile and manage geographic components of a groundwater model within the geographic information system. A significant savings of time and effort is realized in developing, calibrating, and displaying the groundwater flow model. Four major guidelines were followed in developing the interface program: (1) no changes to the groundwater flow model code were to be made; (2) a data structure was to be designed within the geographic information system that follows the same basic data structure as the groundwater flow model; (3) the interface program was to be flexible enough to support all basic data options available within the model; and (4) the interface program was to be as efficient as possible in terms of computer time used and online-storage space needed. Because some programs in the interface are written in control-program language, the interface will run only on a computer with the PRIMOS operating system. (USGS)

  3. Why traditional statistical process control charts for attribute data should be viewed alongside an xmr-chart.

    Science.gov (United States)

    Mohammed, Mohammed A; Worthington, Peter

    2013-03-01

    The use of statistical process control (SPC) charts in healthcare is increasing. The general advice when plotting SPC charts is to begin by selecting the right chart. This advice, in the case of attribute data, may be limiting our insights into the underlying process and consequently be potentially misleading. Given the general lack of awareness that additional insights may be obtained by using more than one SPC chart, there is a need to review this issue and make some recommendations. Under purely common cause variation the control limits on the xmr-chart and traditional attribute charts (eg, p-chart, c-chart, u-chart) will be in close agreement, indicating that the observed variation (xmr-chart) is consistent with the underlying Binomial model (p-chart) or Poisson model (c-chart, u-chart). However, when there is a material difference between the limits from the xmr-chart and the attribute chart then this also constitutes a signal of an underlying systematic special cause of variation. We use one simulation and two case studies to demonstrate these ideas and show the utility of plotting the SPC chart for attribute data alongside an xmr-chart. We conclude that the combined use of attribute charts and xmr-charts, which requires little additional effort, is a useful strategy because it is less likely to mislead us and more likely to give us the insight to do the right thing.

  4. Second Order Cone Programming (SOCP) Relaxation Based Optimal Power Flow with Hybrid VSC-HVDC Transmission and Active Distribution Networks

    DEFF Research Database (Denmark)

    Ding, Tao; Li, Cheng; Yang, Yongheng

    2017-01-01

    The detailed topology of renewable resource bases may have the impact on the optimal power flow of the VSC-HVDC transmission network. To address this issue, this paper develops an optimal power flow with the hybrid VSC-HVDC transmission and active distribution networks to optimally schedule...... the generation output and voltage regulation of both networks, which leads to a non-convex programming model. Furthermore, the non-convex power flow equations are based on the Second Order Cone Programming (SOCP) relaxation approach. Thus, the proposed model can be relaxed to a SOCP that can be tractably solved...

  5. An Efficacious Multi-Objective Fuzzy Linear Programming Approach for Optimal Power Flow Considering Distributed Generation.

    Science.gov (United States)

    Warid, Warid; Hizam, Hashim; Mariun, Norman; Abdul-Wahab, Noor Izzri

    2016-01-01

    This paper proposes a new formulation for the multi-objective optimal power flow (MOOPF) problem for meshed power networks considering distributed generation. An efficacious multi-objective fuzzy linear programming optimization (MFLP) algorithm is proposed to solve the aforementioned problem with and without considering the distributed generation (DG) effect. A variant combination of objectives is considered for simultaneous optimization, including power loss, voltage stability, and shunt capacitors MVAR reserve. Fuzzy membership functions for these objectives are designed with extreme targets, whereas the inequality constraints are treated as hard constraints. The multi-objective fuzzy optimal power flow (OPF) formulation was converted into a crisp OPF in a successive linear programming (SLP) framework and solved using an efficient interior point method (IPM). To test the efficacy of the proposed approach, simulations are performed on the IEEE 30-busand IEEE 118-bus test systems. The MFLP optimization is solved for several optimization cases. The obtained results are compared with those presented in the literature. A unique solution with a high satisfaction for the assigned targets is gained. Results demonstrate the effectiveness of the proposed MFLP technique in terms of solution optimality and rapid convergence. Moreover, the results indicate that using the optimal DG location with the MFLP algorithm provides the solution with the highest quality.

  6. An Efficacious Multi-Objective Fuzzy Linear Programming Approach for Optimal Power Flow Considering Distributed Generation.

    Directory of Open Access Journals (Sweden)

    Warid Warid

    Full Text Available This paper proposes a new formulation for the multi-objective optimal power flow (MOOPF problem for meshed power networks considering distributed generation. An efficacious multi-objective fuzzy linear programming optimization (MFLP algorithm is proposed to solve the aforementioned problem with and without considering the distributed generation (DG effect. A variant combination of objectives is considered for simultaneous optimization, including power loss, voltage stability, and shunt capacitors MVAR reserve. Fuzzy membership functions for these objectives are designed with extreme targets, whereas the inequality constraints are treated as hard constraints. The multi-objective fuzzy optimal power flow (OPF formulation was converted into a crisp OPF in a successive linear programming (SLP framework and solved using an efficient interior point method (IPM. To test the efficacy of the proposed approach, simulations are performed on the IEEE 30-busand IEEE 118-bus test systems. The MFLP optimization is solved for several optimization cases. The obtained results are compared with those presented in the literature. A unique solution with a high satisfaction for the assigned targets is gained. Results demonstrate the effectiveness of the proposed MFLP technique in terms of solution optimality and rapid convergence. Moreover, the results indicate that using the optimal DG location with the MFLP algorithm provides the solution with the highest quality.

  7. Stimulated Hyposalivary Flow Rates in Healthcare Students in an Interprofessional Awareness Educational Program Curriculum

    Directory of Open Access Journals (Sweden)

    R. Constance Wiener

    2017-01-01

    Full Text Available Purpose. Hyposalivation influences quality of life and medication compliance. However, oral health knowledge (in general and knowledge about hyposalivation (in particular are often lacking in nondental healthcare professional’s curricula. Additionally, hyposalivation has not been adequately studied in young adults. The purpose for this study is twofold: to use an interprofessional educational curriculum to increase nondental healthcare students’ knowledge about oral health and salivary testing and determine whether hyposalivation is different between sexes in young adults. Method. First-year medical and pharmacy students (N=178 learned the process of saliva collection and provided samples in an interprofessional program. Results. There were 14.4% of participants with hyposalivation; 72.0% were female. Males had higher flow rates (P=0.005. There failed to be a significant difference between the sexes with frank hyposalivation. There failed to be a significant difference in hyposalivation and medication use/nonuse. Conclusions. Hyposalivation is a biomedical, public health concern. However, in this young population, there was no significant difference between sexes or in medication use/nonuse. Through participation in the program, the students learned about salivary flow rates and the need for collaboration among professionals to prevent negative impacts of hyposalivation and oral health.

  8. Water Hammer Simulations of MMH Propellant - New Capability Demonstration of the Generalized Fluid Flow Simulation Program

    Science.gov (United States)

    Burkhardt, Z.; Ramachandran, N.; Majumdar, A.

    2017-01-01

    Fluid Transient analysis is important for the design of spacecraft propulsion system to ensure structural stability of the system in the event of sudden closing or opening of the valve. Generalized Fluid System Simulation Program (GFSSP), a general purpose flow network code developed at NASA/MSFC is capable of simulating pressure surge due to sudden opening or closing of valve when thermodynamic properties of real fluid are available for the entire range of simulation. Specifically GFSSP needs an accurate representation of pressure-density relationship in order to predict pressure surge during a fluid transient. Unfortunately, the available thermodynamic property programs such as REFPROP, GASP or GASPAK does not provide the thermodynamic properties of Monomethylhydrazine (MMH). This paper will illustrate the process used for building a customized table of properties of state variables from available properties and speed of sound that is required by GFSSP for simulation. Good agreement was found between the simulations and measured data. This method can be adopted for modeling flow networks and systems with other fluids whose properties are not known in detail in order to obtain general technical insight. Rigorous code validation of this approach will be done and reported at a future date.

  9. Transmission Line Adapted Analytical Power Charts Solution

    Science.gov (United States)

    Sakala, Japhet D.; Daka, James S. J.; Setlhaolo, Ditiro; Malichi, Alec Pulu

    2017-08-01

    The performance of a transmission line has been assessed over the years using power charts. These are graphical representations, drawn to scale, of the equations that describe the performance of transmission lines. Various quantities that describe the performance, such as sending end voltage, sending end power and compensation to give zero voltage regulation, may be deduced from the power charts. Usually required values are read off and then converted using the appropriate scales and known relationships. In this paper, the authors revisit this area of circle diagrams for transmission line performance. The work presented here formulates the mathematical model that analyses the transmission line performance from the power charts relationships and then uses them to calculate the transmission line performance. In this proposed approach, it is not necessary to draw the power charts for the solution. However the power charts may be drawn for the visual presentation. The method is based on applying derived equations and is simple to use since it does not require rigorous derivations.

  10. Automating the initial physics chart checking process.

    Science.gov (United States)

    Furhang, Eli E; Dolan, James; Sillanpaa, Jussi K; Harrison, Louis B

    2009-02-11

    The initial physics chart check, an essential quality assurance process, verifies that the physician intent is properly expressed in the treatment plan, the treatment plan is reasonable, and the Record and Verify (RV) system properly captures the plan parameters. In this work the process was automated by characterizing the initial physics chart check as a universal set of steps, compartmentalized into intra-plan and inter-plan reviews. The intra-plan review confirms the diagnosis-prescription-plan correlation, and verifies transfer accuracy of the signed treatment plan parameters into the RV system. The inter-plan review tabulates all RV parameters for similar cases, and highlights outliers. The tabulation of RV parameters for similar cases enables a summation of experience across staff members, and facilitates a comparison using the Statistical Process Control (SPC) formalism. A summary sheet, added to each reviewed chart, automatically documents deviations noted during the review process. Forty-five patient charts were analyzed using the software. The length of time for the entire initial chart-checking process was reduced from about an hour to a few minutes. The code developed in this work allows the user to consider the big picture, trusting the software to track details.

  11. Italian cardiovascular mortality charts of the CUORE project: are they comparable with the SCORE charts?

    LENUS (Irish Health Repository)

    Donfrancesco, Chiara

    2010-08-01

    The aim of this study was to build risk charts for the assessment of cardiovascular mortality of the CUORE project, an Italian longitudinal study, and to compare them with the systematic coronary risk evaluation (SCORE) project charts for low risk European countries.

  12. APPLICATION OF U-CHART AND C-CHART IN TECHNOLOGICAL PROCESS OF PRIMARY WOOD PROCESSING

    Directory of Open Access Journals (Sweden)

    Damjan Stanojević

    2014-01-01

    Full Text Available Control charts are statistical methods of quality control. Basically it is a graph where the abscissa represents the order of control, and the ordinate is marked with parameter values, which are controled by samples over a certain size. Using charts determine varying quality and also related the stability and capacity of the production process in relation to the established control limits. Dr. Schuchardt, which can be regarded as the creator of control charts, says that their mission: to maintain the production process in a state of control, to lead the production process into a state of control, to show that the state of control has been achieved. According to Dr. Schuchardt „for a phenomenon is said to be controlled if based on current data we can predict, at least within certain limits, how the phenomenon will change in the future. Here, under certain prediction within limits means that we can determine, at least approximately, the probability that the phenomenon is found within the given limits“. Control charts for attribute quality characteristics are: p- control chart, m- control chart, u- control chart, c- control chart.

  13. [Comparing quality measurements Part 2: control charts].

    Science.gov (United States)

    Kottner, Jan; Hauss, Armin

    2013-04-01

    Comparative quality measurements and evaluations in nursing play significant roles. Quality measures are affected by systematic and random error. Statistical Process Control (SPC) offers a method to take random variation adequately into account. In this article, control charts are introduced. Those are graphical displays to show quality measures over time. Attribute variables can be displayed by p-, u- and c-control charts. Special cause variations within the processes can be detected by rules. If signs for special cause variations are absent, the process in considered being in statistical control showing common cause variation. A deviation of one data point greater than three standard deviations from the arithmetic mean is considered the strongest signal for non random variation within the process. Within quality improvement contexts control charts outperform traditional comparisons of means and spreads.

  14. Individuals charts and additional tests for changes in spread

    NARCIS (Netherlands)

    Trip, A.; Wieringa, J.E.

    A number of authors have indicated that it is not a good idea to use the moving range chart (MR-chart) with all individuals chart to detect shifts in the spread. However, the combination of these charts is still used in practice and even presented as 'best practice' in some cases. In addition, some

  15. CS-EWMA chart for monitoring process dispersion

    NARCIS (Netherlands)

    Abbas, N.; Riaz, M.; Does, R.J.M.M.

    2013-01-01

    Control charts are the most extensively used technique to detect the presence of special cause variations in processes. They can be classified into memory and memoryless control charts. Cumulative sum and exponentially weighted moving average control charts are memory-type control charts as their

  16. Developing a Logarithmic Chinese Reading Acuity Chart.

    Science.gov (United States)

    Han, Qi-Ming; Cong, Lin-Juan; Yu, Cong; Liu, Lei

    2017-06-01

    An individual's reading ability cannot be reliably predicted from his/her letter acuity, contrast sensitivity, and visual field extent. We developed a set of Chinese reading acuity charts (C-READ) to assess the reading ability of Chinese readers, based on the collective wisdom of previously published reading acuity charts, especially the MNRead and the Radner Reading Charts. The C-READ consists of three charts. Each consists sixteen 12-character simplified Chinese sentences crafted from first- to third-grade textbooks. One hundred eighteen native Chinese-speaking college students (aged 22.1 ± 2.1 years) with normal or corrected to normal near vision (-0.26 ± 0.05 logMAR) were included in the study to develop the C-READ charts, to test the homogeneity of the three charts, and to validate the C-READ against the text paragraphs from the International Reading Speed Texts (IReST) with corrected and uncorrected near vision. The reading acuity, critical print size, and maximum reading speed for young normal native Chinese-speaking readers were 0.16 ± 0.05 logMAR, 0.24 ± 0.06 logMAR, and 273.44 ± 34.37 characters per minute (mean ± SD), respectively. The reliability test revealed no significant differences among the three C-READ charts and no significant test order effect in the three reading parameters. Regression analyses showed that the IReST reading speed could be reliably predicted by the C-READ maximum reading speed under the corrected near-vision condition (adjusted R = 0.72) and by C-READ maximum reading speed and critical print size under the uncorrected near-vision condition (adjusted R = 0.69). The three C-READ charts are very comparable to each other, and there is no significant order effect. Reading test results can accurately predict continuous text reading performance quantified by the IReST reading speed over a wide range of refractive errors. The C-READ is a reliable and valid clinical instrument for quantifying reading performance in simplified

  17. Course Design and Delivery Specifications as a Tool for Ensuring Quality in an Online Training Program | Une charte pédagogique comme outil de qualité d’un programme en ligne

    Directory of Open Access Journals (Sweden)

    Françoise Docq

    2015-11-01

    Full Text Available This case discusses the design, implementation, and regulation of a hybrid training program (60 credits over two years organised by three business schools in Europe, and stretching over a five-year period. Following an incremental design process, the design team faced multiple challenges, from finding the added value of hybridization to choosing the technological environment that would be key to the instructional design of the 17 program modules. Subtle interpersonal skills were required to develop a program that suited every professor (n = approximately 40 and every institutional context (3.

  18. improving the implementation of pre-laboratory flow charts

    African Journals Online (AJOL)

    Temechegn

    accountability and helping students to develop team work skills and lastly the post laboratory reports evaluation .... Individual student performance was superior when cooperative methods were used as compared with ... According to the Johnson & Johnson model, cooperative learning is instruction that involves students ...

  19. Cost comparisons of modified X̅ chart for autocorrelated observations

    OpenAIRE

    Prajapati D. R.

    2016-01-01

    This paper presents the economic design of modified X̅ chart for autocorrelated data and comparison with the economic design of Shewhart’s X̅ chart. An attempt has been made to counter autocorrelation by designing the modified X̅ chart; as the cost of operating a process control system is an important element in the economic design of control charts. The economic designs of both modified and Shewhart X̅ charts for autocorrelated observations...

  20. Process capability index-based control chart for variables

    OpenAIRE

    Adeoti, Olatunde Adebayo; Olaomi, John Olutunji

    2017-01-01

    This paper proposes a process capability index-based control chart for variables using the Downton estimator with a specified Cp value. The proposed chart is able to address the issue of control and capability simultaneously. We also provide a control chart constant to construct the process capability index-based control chart. A numerical example is presented to demonstrate the application of the proposed chart, and the effect of non-normality is discussed. The result shows that the proposed...

  1. Simulation on Control Chart in Monitoring the Multivariate Process Variability

    OpenAIRE

    Sunusi, Nurtiti

    2017-01-01

    - Abstract. Control chart used to monitor shifts in the process mean and variability for multivariate data. This paper aims to monitor process variability through chart. Process variability observed by used the determinant of the sample covariance matrix, which is called . The result of this paper show that the improved chart is more sensitive to shifts in the process variability. The standard chart has a bigger ARL than the improved chart by simulation.

  2. Controlling methicillin-resistant Staphylococcus aureus: a feedback approach using annotated statistical process control charts.

    Science.gov (United States)

    Curran, Evonne T; Benneyan, James C; Hood, John

    2002-01-01

    To investigate the benefit of a hospitalwide feedback program regarding methicillin-resistant Staphylococcus aureus (MRSA), using annotated statistical process control charts. Retrospective and prospective analysis of MRSA rates using statistical process control charts. Twenty-four medical, medical specialty, surgical, intensive care, and cardiothoracic care wards and units at four Glasgow Royal Infirmary hospitals. Annotated control charts were applied to prospective and historical monthly data on MRSA cases from each ward and unit during a 46-month period from January 1997 through September 2000. Results were fed back from December 1999 and then on a regular monthly basis to medical staff, ward managers, senior managers, and hotel services. Monthly reductions in the MRSA acquisition rate started 2 months after the introduction of the feedback program and have continued to the present time. The overall MRSA rate currently is approximately 50% lower than when the program began and has become more consistent and less variable within departments throughout Glasgow Royal Infirmary. The control charts have helped to detect rate changes and manage resources more effectively. Medical and nursing staff and managers also report that they find this the most positive form of MRSA feedback they have received. Feedback programs that provide current information to front-line staff and incorporate annotated control charts can be effective in reducing the rate of MRSA.

  3. Variable thickness transient ground-water flow model. Volume 3. Program listings

    Energy Technology Data Exchange (ETDEWEB)

    Reisenauer, A.E.

    1979-12-01

    The Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) Program is developing and applying the methodology for assessing the far-field, long-term post-closure safety of deep geologic nuclear waste repositories. AEGIS is being performed by Pacific Northwest Laboratory (PNL) under contract with the Office of Nuclear Waste Isolation (OWNI) for the Department of Energy (DOE). One task within AEGIS is the development of methodology for analysis of the consequences (water pathway) from loss of repository containment as defined by various release scenarios. Analysis of the long-term, far-field consequences of release scenarios requires the application of numerical codes which simulate the hydrologic systems, model the transport of released radionuclides through the hydrologic systems to the biosphere, and, where applicable, assess the radiological dose to humans. Hydrologic and transport models are available at several levels of complexity or sophistication. Model selection and use are determined by the quantity and quality of input data. Model development under AEGIS and related programs provides three levels of hydrologic models, two levels of transport models, and one level of dose models (with several separate models). This is the third of 3 volumes of the description of the VTT (Variable Thickness Transient) Groundwater Hydrologic Model - second level (intermediate complexity) two-dimensional saturated groundwater flow.

  4. ICAO Aeronautical chart production: aerodrome obstruction charts from small–format aerial digital imagery

    Directory of Open Access Journals (Sweden)

    Jorge Padro Molina

    2012-11-01

    Full Text Available Aeronautical charts and aerodrome obstruction charts, provide information about obstacles around the airport, so pilots and air traffic controllers can comply with the procedures and limitations of its utilization. Safety in aviation demands updated and precise aeronautical charts production, adopting the standards of the International Civil Aviation Organization (ICAO. In this paper the methodology employed to generate obstruction charts for five airports in Mexico, using aerial digital imagery obtained with small–format cameras, is described. Through two aerial surveys on each airport, from 10 000 and 5 000 feet above ground level, two orthomosaics were generated covering the airport influence area, the runway, and the obstacle limitation surfaces: approach/Take–off climb, transitional, inner horizontal, and conical. Using stereopair photointerpretation most of the obstacles were identified, and by means of the orthomosaics; aerodrome charts, and aerodrome obstruction charts types A, B and C, were generated. Using satellite geodetic receivers, 18 points were surveyed on each runway in order to obtain its dimensions, and to establish ground control points for mosaics generation. Throughout detailed field work, height and location of the obstacles were verified, and finally, after several reviewing processes by aeronautical authorities, generation of ICAO charts was concluded when all airport maps were integrated in a Geographical Information System.

  5. ICS International Chronostratigraphic Chart 2015/01

    NARCIS (Netherlands)

    Cohen, K.M.|info:eu-repo/dai/nl/185633374; Finney, S.C.; Gibbard, P.L.

    Units of all ranks are in the process of being defined by Global Boundary Stratotype Section and Points (GSSP) for their lower boundaries, including those of the Archean and Proterozoic, long defined by Global Standard Stratigraphic Ages (GSSA). Charts and detailed information on ratified GSSPs are

  6. ICS International Chronostratigraphic Chart 2016/04

    NARCIS (Netherlands)

    Cohen, K.M.|info:eu-repo/dai/nl/185633374; Finney, S.C.; Gibbard, P.L.

    Units of all ranks are in the process of being defined by Global Boundary Stratotype Section and Points (GSSP) for their lowerboundaries, including those of the Archean and Proterozoic, long defined by Global Standard Stratigraphic Ages (GSSA). Charts and detailed information on ratified GSSPs are

  7. Charting environmental pollution. [by noise measurements

    Science.gov (United States)

    Halpert, E.; Bizo, F.; Karacsonyi, Z.

    1974-01-01

    It is found that areas affected by different noxious agents are within the limits traced for high noise level areas; consequently, it is suggested that high noise pressure levels should be used as the primary indication of environmental pollution. A complex methodology is reported for charting environmental pollution due to physical, chemical and biological noxious agents on the scale of an industrial district.

  8. Body Mass Index (BMI) Charts (For Parents)

    Science.gov (United States)

    ... September 2015 More on this topic for: Parents Kids Teens Overweight and Obesity Growth Charts What Is a Growth Disorder? Your Child's Weight What Is a BMI Report Card? Your Child's ... the Right Weight for Me? Be a Fit Kid Body Mass Index (BMI) I'm Not Fat. ...

  9. EWMA control charts in statistical process monitoring

    NARCIS (Netherlands)

    Zwetsloot, I.M.

    2016-01-01

    In today’s world, the amount of available data is steadily increasing, and it is often of interest to detect changes in the data. Statistical process monitoring (SPM) provides tools to monitor data streams and to signal changes in the data. One of these tools is the control chart. The topic of this

  10. POWER AND INFLUENCE CHARTING: THE GOOGLE WAY

    Energy Technology Data Exchange (ETDEWEB)

    Troy Hiltbrand; Sharon Berrett

    2011-07-01

    The success or failure of a project may be charted in the initiation phase. Therefore, initiation is arguably the most important phase of any project. During the initiation phase, the foundation for the project is established, including the selection of project sponsors and champions and getting their buy-in, which sets the project up for success.

  11. Feasibility study of red blood cell debulking by magnetic field-flow fractionation with step-programmed flow.

    Science.gov (United States)

    Moore, Lee R; Williams, P Stephen; Nehl, Franziska; Abe, Koji; Chalmers, Jeffrey J; Zborowski, Maciej

    2014-02-01

    Emerging applications of rare cell separation and analysis, such as separation of mature red blood cells from hematopoietic cell cultures, require efficient methods of red blood cell (RBC) debulking. We have tested the feasibility of magnetic RBC separation as an alternative to centrifugal separation using an approach based on the mechanism of magnetic field-flow fractionation (MgFFF). A specially designed permanent magnet assembly generated a quadrupole field having a maximum field of 1.68 T at the magnet pole tips, zero field at the aperture axis, and a nearly constant radial field gradient of 1.75 T/mm (with a negligible angular component) inside a cylindrical aperture of 1.9 mm (diameter) and 76 mm (length). The cell samples included high-spin hemoglobin RBCs obtained by chemical conversion of hemoglobin to methemoglobin (met RBC) or by exposure to anoxic conditions (deoxy RBC), low-spin hemoglobin obtained by exposure of RBC suspension to ambient air (oxy RBC), and mixtures of deoxy RBC and cells from a KG-1a white blood cell (WBC) line. The observation that met RBCs did not elute from the channel at the lower flow rate of 0.05 mL/min applied for 15 min but quickly eluted at the subsequent higher flow rate of 2.0 mL/min was in agreement with FFF theory. The well-defined experimental conditions (precise field and flow characteristics) and a well-established FFF theory verified by studies with model cell systems provided us with a strong basis for making predictions about potential practical applications of the magnetic RBC separation.

  12. VNAP2: a computer program for computation of two-dimensional, time-dependent, compressible, turbulent flow

    Energy Technology Data Exchange (ETDEWEB)

    Cline, M.C.

    1981-08-01

    VNAP2 is a computer program for calculating turbulent (as well as laminar and inviscid), steady, and unsteady flow. VNAP2 solves the two-dimensional, time-dependent, compressible Navier-Stokes equations. The turbulence is modeled with either an algebraic mixing-length model, a one-equation model, or the Jones-Launder two-equation model. The geometry may be a single- or a dual-flowing stream. The interior grid points are computed using the unsplit MacCormack scheme. Two options to speed up the calculations for high Reynolds number flows are included. The boundary grid points are computed using a reference-plane-characteristic scheme with the viscous terms treated as source functions. An explicit artificial viscosity is included for shock computations. The fluid is assumed to be a perfect gas. The flow boundaries may be arbitrary curved solid walls, inflow/outflow boundaries, or free-jet envelopes. Typical problems that can be solved concern nozzles, inlets, jet-powered afterbodies, airfoils, and free-jet expansions. The accuracy and efficiency of the program are shown by calculations of several inviscid and turbulent flows. The program and its use are described completely, and six sample cases and a code listing are included.

  13. An Exponentially Weighted Moving Average Control Chart for Bernoulli Data

    DEFF Research Database (Denmark)

    Spliid, Henrik

    2010-01-01

    weighted moving average (EWMA) control chart intended for surveillance of the probability of failure, p, is described. The chart is based on counting the number of non-failures produced between failures in combination with a variance-stabilizing transformation. The distribution function...... of the transformation is given and its limit for small values of p is derived. Control of high yield processes is discussed and the chart is shown to perform very well in comparison with both the most common alternative EWMA chart and the CUSUM chart. The construction and the use of the proposed EWMA chart...

  14. Process capability index-based control chart for variables

    Directory of Open Access Journals (Sweden)

    Adeoti, Olatunde Adebayo

    2017-08-01

    Full Text Available This paper proposes a process capability index-based control chart for variables using the Downton estimator with a specified Cp value. The proposed chart is able to address the issue of control and capability simultaneously. We also provide a control chart constant to construct the process capability index-based control chart. A numerical example is presented to demonstrate the application of the proposed chart, and the effect of non-normality is discussed. The result shows that the proposed control chart performs better in monitoring and assessing processes, and eliminates the usual two-stage procedure reflected in the literature.

  15. Quality initiatives: statistical control charts: simplifying the analysis of data for quality improvement.

    Science.gov (United States)

    Cheung, Yvonne Y; Jung, Boyoun; Sohn, Jae Ho; Ogrinc, Greg

    2012-01-01

    Quality improvement (QI) projects are an integral part of today's radiology practice, helping identify opportunities for improving outcomes by refining work processes. QI projects are typically driven by outcome measures, but the data can be difficult to interpret: The numbers tend to fluctuate even before a process is altered, and after a QI intervention takes place, it may be even more difficult to determine the cause of such vacillations. Control chart analysis helps the QI project team identify variations that should be targeted for intervention and avoid tampering in processes in which variation is random or harmless. Statistical control charts make it possible to distinguish among random variation or noise in the data, outlying tendencies that should be targeted for future intervention, and changes that signify the success of previous intervention. The data on control charts are plotted over time and integrated with various graphic devices that represent statistical reasoning (eg, control limits) to allow visualization of the intensity and overall effect-negative or positive-of variability. Even when variability has no substantial negative effect, appropriate intervention based on the results of control chart analysis can help increase the efficiency of a process by optimizing the central tendency of the outcome measure. Different types of control charts may be used to analyze the same outcome dataset: For example, paired charts of individual values (x) and the moving range (mR) allow robust and reliable analyses of most types of data from radiology QI projects. Many spreadsheet programs and templates are available for use in creating x-mR charts and other types of control charts.

  16. [Ophthalmologic reading charts : Part 2: Current logarithmically scaled reading charts].

    Science.gov (United States)

    Radner, W

    2016-12-01

    To analyze currently available reading charts regarding print size, logarithmic print size progression, and the background of test-item standardization. For the present study, the following logarithmically scaled reading charts were investigated using a measuring microscope (iNexis VMA 2520; Nikon, Tokyo): Eschenbach, Zeiss, OCULUS, MNREAD (Minnesota Near Reading Test), Colenbrander, and RADNER. Calculations were made according to EN-ISO 8596 and the International Research Council recommendations. Modern reading charts and cards exhibit a logarithmic progression of print sizes. The RADNER reading charts comprise four different cards with standardized test items (sentence optotypes), a well-defined stop criterion, accurate letter sizes, and a high print quality. Numbers and Landolt rings are also given in the booklet. The OCULUS cards have currently been reissued according to recent standards and also exhibit a high print quality. In addition to letters, numbers, Landolt rings, and examples taken from a timetable and the telephone book, sheet music is also offered. The Colenbrander cards use short sentences of 44 characters, including spaces, and exhibit inaccuracy at smaller letter sizes, as do the MNREAD cards. The MNREAD cards use sentences of 60 characters, including spaces, and have a high print quality. Modern reading charts show that international standards can be achieved with test items similar to optotypes, by using recent technology and developing new concepts of test-item standardization. Accurate print sizes, high print quality, and a logarithmic progression should become the minimum requirements for reading charts and reading cards in ophthalmology.

  17. SEAWAT: A Computer Program for Simulation of Variable-Density Groundwater Flow and Multi-Species Solute and Heat Transport

    Science.gov (United States)

    Langevin, Christian D.

    2009-01-01

    SEAWAT is a MODFLOW-based computer program designed to simulate variable-density groundwater flow coupled with multi-species solute and heat transport. The program has been used for a wide variety of groundwater studies including saltwater intrusion in coastal aquifers, aquifer storage and recovery in brackish limestone aquifers, and brine migration within continental aquifers. SEAWAT is relatively easy to apply because it uses the familiar MODFLOW structure. Thus, most commonly used pre- and post-processors can be used to create datasets and visualize results. SEAWAT is a public domain computer program distributed free of charge by the U.S. Geological Survey.

  18. JDATAVIEWER – JAVA-Based Charting Library

    CERN Document Server

    Kruk, G

    2009-01-01

    The JDataViewer is a Java-based charting library developed at CERN, with powerful, extensible and easy to use function editing capabilities. Function edition is heavily used in Control System applications, but poorly supported in products available on the market. The JDataViewer enables adding, removing and modifying function points graphically (using a mouse) or by editing a table of values. Custom edition strategies are supported: developer can specify an algorithm that reacts to the modification of a given point in the function by automatically adapting all other points. The library provides all typical 2D plotting types (scatter, polyline, area, bar, HiLo, contour), as well as data point annotations and data indicators. It also supports common interactors to zoom and move the visible view, or to select and highlight function segments. A clear API is provided to configure and customize all chart elements (colors, fonts, data ranges ...) programmatically, and to integrate non-standard rendering types, inter...

  19. GENERALISATION OF SUBMARINE FEATURES ON NAUTICAL CHARTS

    Directory of Open Access Journals (Sweden)

    E. Guilbert

    2012-07-01

    Full Text Available On most large scale and middle scale maps, relief is represented by contours and spot heights. In order to adapt the representation to the scale, the terrain is generalised either by smoothing or filtering the terrain model or by simplifying the contours. However this approach is not applicable to nautical chart construction where terrain features are selected according to their importance for navigation. This paper presents an approach for the consideration of feature attributes in the generalisation of a set of contours with respect to nautical chart constraints. Features are defined by sets of contours and a set of generalisation operators applied to features is presented. The definitions are introduced in a multi-agent system in order to perform automatic generalisation of a contour set. Results are discussed on a case study and directions for future work are presented.

  20. New growth charts for Libyan preschool children.

    Science.gov (United States)

    Bordom, J H; Billot, L; Gueguen, R; Deschamps, J R

    2008-01-01

    To draw up new growth charts for Libyan children under 5 years of age, a cross-sectional survey was carried out in urban and rural areas in 2 regions of the Libyan Arab Jamahiriya from June 1999 to February 2000. Using WHO cluster sampling methodology, 1473 infants and children of both sexes aged between 0 and 59 months were selected from residential areas, maternal and child health centres, kindergartens and the delivery section of hospitals. Growth charts for weight-for-age, height-for-age and weight-for-height were plotted and smoothed, to provide reference curves for clinical, epidemiological and research purposes. In addition, mean Z-scores were analysed by sociodemographic variables collected from interviews with parents. Factors with a strong influence on childhood growth patterns were child's age, mother's education level and sex.

  1. Monitoring of International Space Station Telemetry Using Shewhart Control Charts

    Science.gov (United States)

    Fitch, Jeffery T.; Simon, Alan L.; Gouveia, John A.; Hillin, Andrew M.; Hernandez, Steve A.

    2012-01-01

    Shewhart control charts have been established as an expedient method for analyzing dynamic, trending data in order to identify anomalous subsystem performance as soon as such performance would exceed a statistically established baseline. Additionally, this leading indicator tool integrates a selection methodology that reduces false positive indications, optimizes true leading indicator events, minimizes computer processor unit duty cycles, and addresses human factor concerns (i.e., the potential for flight-controller data overload). This innovation leverages statistical process control, and provides a relatively simple way to allow flight controllers to focus their attention on subtle system changes that could lead to dramatic off-nominal system performance. Finally, this capability improves response time to potential hardware damage and/or crew injury, thereby improving space flight safety. Shewhart control charts require normalized data. However, the telemetry from the ISS Early External Thermal Control System (EETCS) was not normally distributed. A method for normalizing the data was implemented, as was a means of selecting data windows, the number of standard deviations (Sigma Level), the number of consecutive points out of limits (Sequence), and direction (increasing or decreasing trend data). By varying these options, and treating them like dial settings, the number of nuisance alerts and leading indicators were optimized. The goal was to capture all leading indicators while minimizing the number of nuisances. Lean Six Sigma (L6S) design of experiment methodologies were employed. To optimize the results, Perl programming language was used to automate the massive amounts of telemetry data, control chart plots, and the data analysis.

  2. Intelligent Bar Chart Plagiarism Detection in Documents

    Directory of Open Access Journals (Sweden)

    Mohammed Mumtaz Al-Dabbagh

    2014-01-01

    Full Text Available This paper presents a novel features mining approach from documents that could not be mined via optical character recognition (OCR. By identifying the intimate relationship between the text and graphical components, the proposed technique pulls out the Start, End, and Exact values for each bar. Furthermore, the word 2-gram and Euclidean distance methods are used to accurately detect and determine plagiarism in bar charts.

  3. Intelligent Bar Chart Plagiarism Detection in Documents

    Science.gov (United States)

    Al-Dabbagh, Mohammed Mumtaz; Salim, Naomie; Alkawaz, Mohammed Hazim; Saba, Tanzila; Al-Rodhaan, Mznah; Al-Dhelaan, Abdullah

    2014-01-01

    This paper presents a novel features mining approach from documents that could not be mined via optical character recognition (OCR). By identifying the intimate relationship between the text and graphical components, the proposed technique pulls out the Start, End, and Exact values for each bar. Furthermore, the word 2-gram and Euclidean distance methods are used to accurately detect and determine plagiarism in bar charts. PMID:25309952

  4. Solid Rocket Testing at AFRL (Briefing Charts)

    Science.gov (United States)

    2016-10-21

    19b. TELEPHONE NUMBER (Include area code) 10/21/2016 Briefing Charts 01 October 2016 - 31 October 2016 Solid Rocket Testing at AFRL Robert Antypas Air...Unclassified SAR 18 R. Antypas N/A Solid Rocket Testing at AFRL 21 Oct 2016 Robert Antypas AFRL/RQRO -Distribution A: Approved for Public Release...Distribution Unlimited. PA#16492 2 Agenda • Solid Rocket Motors • History of Sea Level Testing • Small Component Testing • Full-scale Testing • Altitude

  5. Intelligent bar chart plagiarism detection in documents.

    Science.gov (United States)

    Al-Dabbagh, Mohammed Mumtaz; Salim, Naomie; Rehman, Amjad; Alkawaz, Mohammed Hazim; Saba, Tanzila; Al-Rodhaan, Mznah; Al-Dhelaan, Abdullah

    2014-01-01

    This paper presents a novel features mining approach from documents that could not be mined via optical character recognition (OCR). By identifying the intimate relationship between the text and graphical components, the proposed technique pulls out the Start, End, and Exact values for each bar. Furthermore, the word 2-gram and Euclidean distance methods are used to accurately detect and determine plagiarism in bar charts.

  6. Change Point Detection with Robust Control Chart

    Directory of Open Access Journals (Sweden)

    Ng Kooi Huat

    2011-01-01

    Full Text Available Monitoring a process over time using a control chart allows quick detection of unusual states. In phase I, some historical process data, assumed to come from an in-control process, are used to construct the control limits. In Phase II, the process is monitored for an ongoing basis using control limits from Phase I. In Phase II, observations falling outside the control limits or unusual patterns of observations signal that the process has shifted from in-control process settings. Such signals trigger a search for assignable cause and, if the cause is found, corrective action will be implemented to prevent its recurrence. The purpose of this paper is to introduce a new methodology appropriate for constructing a robust control chart when a nonnormal or a contaminated data that may arise in phase I state. Through extensive Monte Carlo simulations, we examine the behaviors and performances of the proposed MM robust control chart when there is a process shift in mean.

  7. Arctic Sea Ice Charts from Danish Meteorological Institute, 1893 - 1956

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — From 1893 to 1956, the Danish Meteorological Institute (DMI) created charts of observed and inferred sea ice extent for each summer month. These charts are based on...

  8. Design of Attribute Control Chart Based on Regression Estimator

    Directory of Open Access Journals (Sweden)

    Nadia Mushtaq

    2017-09-01

    Full Text Available This paper presents a statistical analysis control chart for nonconforming units in quality control. In many situations the Shewhart control charts for nonconforming units may not be suitable or cannot be used, as for many processes, the assumptions of binomial distribution may deviate or may provide inadequate model. In this Study we propose a new control chart based on regression estimator of proportion based on single auxiliary variable, namely the Pr chart and compared its performance with P and Q chart with probability to signal as a performance measure. It has been observed that the proposed chart is superior to the P and Q chart. This study will help quality practitioners to choose an efficient alternative to the classical P and Q charts for monitoring nonconforming units in industrial process.

  9. The EWMA control chart based on robust scale estimators

    OpenAIRE

    Nadia Saeed; Shahid Kamal

    2016-01-01

    The exponentially weighted moving average (EWMA) chart is very popular in statistical process control for detecting the small shifts in process mean and variance. This chart performs well under the assumption of normality but when data violate the assumption of normality, the robust approaches needed. We have developed the EWMA charts under different robust scale estimators available in literature and also compared the performance of these charts by calculating expected out-of-control points ...

  10. Design of Attribute Control Chart Based on Regression Estimator

    OpenAIRE

    Nadia Mushtaq; Dr. Muhammad Aslam; Jaffer Hussaian

    2017-01-01

    This paper presents a statistical analysis control chart for nonconforming units in quality control. In many situations the Shewhart control charts for nonconforming units may not be suitable or cannot be used, as for many processes, the assumptions of binomial distribution may deviate or may provide inadequate model. In this Study we propose a new control chart based on regression estimator of proportion based on single auxiliary variable, namely the Pr chart and compared its ...

  11. Ewmareg control chart applied in the monitoring of industrial processes

    OpenAIRE

    Danilo Cuzzuol Pedrini; Ângelo Márcio de Oliveira Sant'ana; Carla Schwengber ten Caten

    2011-01-01

    If the process quality characteristics are dependent of control variables, and these vary during the process operation, the basic assumptions of control charts are violated. If the values of the control variables are known, it’s possible to apply the regression control chart. One of the most recent works in this area is the EWMAREG chart, which is the monitoring of the standardized residuals using exponentially weighted moving average control chart. In this paper, we present a systematic appl...

  12. Quality control chart method for analyzing PEF variability in occupational asthma.

    Science.gov (United States)

    Hayati, Fazel; Maghsoodloo, Seed; DeVivo, Michael J; Thomas, Robert E; Lemiere, Catherine

    2008-03-01

    Asthma is the most common occupational respiratory disorder in the industrialized world. In this research we investigated the effectiveness of quality control chart as a method to explore the work-relatedness of asthma using peak expiratory flow (PEF) as the variable of interest. PEF measurements were recorded from several workers suspected of having occupational asthma. The measurements were recorded for a period of 2 weeks at work and two away from work. For each subject, average [symbol: see text] quality control chart was developed and analyzed using Shewhart methods. Using the ratio of average daily PEF diurnal variation at work to the baseline average diurnal variation, quality control chart detected and characterized increased variation in PEF between the periods at workplace and away from workplace. This ratio was evaluated at 15% and 20% and compared to the results of the gold standard. A ratio of greater than 15% produced a sensitivity of 94% and specificity of 61%. These results are as good as and in some cases better than the previously published work. Quality control chart is an effective and inexpensive method for early intervention to detect workers suspected for occupational asthma. Also, the findings in this article are an invitation for further research in occupational asthma using quality control chart methods for other indices of airways obstruction (FEV-1, RAW) or inflammation (NO).

  13. 76 FR 53530 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2011-08-26

    ... Federal Aviation Administration Government/Industry Aeronautical Charting Forum Meeting AGENCY: Federal...-annual meeting of the Federal Aviation Administration (FAA) Aeronautical Charting Forum (ACF) to discuss... given of a meeting of the FAA Aeronautical Charting Forum to be held from October 25 through October 27...

  14. 78 FR 12415 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2013-02-22

    ... Federal Aviation Administration Government/Industry Aeronautical Charting Forum Meeting AGENCY: Federal...-annual meeting of the Federal Aviation Administration (FAA) Aeronautical Charting Forum (ACF) to discuss...), notice is hereby given of a meeting of the FAA Aeronautical Charting Forum to be held from April 23...

  15. 75 FR 54221 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2010-09-03

    ... Aeronautical Charting Forum Meeting AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of... Administration (FAA) Aeronautical Charting Forum (ACF) to discuss informational content and design of... the FAA Aeronautical Charting Forum to be held from October 26 through October 28, 2010, from 8:30 a.m...

  16. 78 FR 52230 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2013-08-22

    ... Federal Aviation Administration Government/Industry Aeronautical Charting Forum Meeting AGENCY: Federal...-annual meeting of the Federal Aviation Administration (FAA) Aeronautical Charting Forum (ACF) to discuss...), notice is hereby given of a meeting of the FAA Aeronautical Charting Forum to be held from October 29...

  17. 75 FR 11225 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2010-03-10

    ... Federal Aviation Administration Government/Industry Aeronautical Charting Forum Meeting AGENCY: Federal... Forum (ACF 10-01) to discuss informational content and design of aeronautical charts and related.... App. II), notice is hereby given of a meeting of the FAA Aeronautical Charting Forum to be held from...

  18. 77 FR 50759 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2012-08-22

    ... TRANSPORTATION Federal Aviation Administration Government/Industry Aeronautical Charting Forum Meeting AGENCY... announces the bi-annual meeting of the Federal Aviation Administration (FAA) Aeronautical Charting Forum... hereby given of a meeting of the FAA Aeronautical Charting Forum to be held from October 23 through...

  19. 76 FR 12211 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2011-03-04

    ... Federal Aviation Administration Government/Industry Aeronautical Charting Forum Meeting AGENCY: Federal...-annual meeting of the Federal Aviation Administration (FAA) Aeronautical Charting Forum (ACF) to discuss... of a meeting of the FAA Aeronautical ] Charting Forum to be held from April 26 through April 28, 2011...

  20. 46 CFR 150.150 - Exceptions to the compatibility chart.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Exceptions to the compatibility chart. 150.150 Section... CARGOES COMPATIBILITY OF CARGOES § 150.150 Exceptions to the compatibility chart. The Commandant (G-MSO... 1, the Compatibility Chart. ...

  1. 5 CFR Appendix A-1 to Subpart I... - Windchill Chart

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Windchill Chart A Appendix A-1 to Subpart I of Part 550 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY... A-1 to Subpart I of Part 550—Windchill Chart EC01SE91.002 windchill chart in non-metric units...

  2. Individual Charts and Additional Tests for Changes in Spread

    NARCIS (Netherlands)

    Trip, A.; Wieringa, J.E.

    2006-01-01

    Abstract A number of authors have indicated that it is not a good idea to use the MR-chart with an individuals chart to detect shifts in the spread. However, the combination of these charts is still used in practice and even presented as `best practice' in some cases. In addition, some more recent

  3. 15 CFR 738.3 - Commerce Country Chart structure.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Commerce Country Chart structure. 738.3 Section 738.3 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade... COMMERCE CONTROL LIST OVERVIEW AND THE COUNTRY CHART § 738.3 Commerce Country Chart structure. (a) Scope...

  4. Enhanced cumulative sum charts for monitoring process dispersion.

    Science.gov (United States)

    Abujiya, Mu'azu Ramat; Riaz, Muhammad; Lee, Muhammad Hisyam

    2015-01-01

    The cumulative sum (CUSUM) control chart is widely used in industry for the detection of small and moderate shifts in process location and dispersion. For efficient monitoring of process variability, we present several CUSUM control charts for monitoring changes in standard deviation of a normal process. The newly developed control charts based on well-structured sampling techniques - extreme ranked set sampling, extreme double ranked set sampling and double extreme ranked set sampling, have significantly enhanced CUSUM chart ability to detect a wide range of shifts in process variability. The relative performances of the proposed CUSUM scale charts are evaluated in terms of the average run length (ARL) and standard deviation of run length, for point shift in variability. Moreover, for overall performance, we implore the use of the average ratio ARL and average extra quadratic loss. A comparison of the proposed CUSUM control charts with the classical CUSUM R chart, the classical CUSUM S chart, the fast initial response (FIR) CUSUM R chart, the FIR CUSUM S chart, the ranked set sampling (RSS) based CUSUM R chart and the RSS based CUSUM S chart, among others, are presented. An illustrative example using real dataset is given to demonstrate the practicability of the application of the proposed schemes.

  5. Assessment of family physicians' performance using patient charts: interrater reliability and concordance with chart-stimulated recall interview.

    Science.gov (United States)

    Goulet, François; Jacques, André; Gagnon, Robert; Racette, Pierre; Sieber, William

    2007-12-01

    Peer-assessment processes with chart review have been used for many years to assess the clinical performance of physicians. The Quebec medical licensing authority has been required by provincial law to assess the practicing Quebec physicians on a nonvoluntary basis. During the period from January 2001 to November 2004, 25 family physicians in active practice were randomly selected from a pool of about 300. For each physician, 25 to 40 patients' medical charts were randomly selected to evaluate the interrater reliability of peer-review assessment of medical charts and to compare ratings based on chart review with a chart-stimulated recall interview to those based on chart review alone. The concordance between chart review alone and that of chart review with chart-stimulated recall interview was 75% for chart keeping, 69% for clinical investigation, 81% for diagnostic accuracy, and 74% for treatment plan. Ratings based on chart review alone achieve moderate levels of reliability (Kappa = 0.44 to 0.56). It appears that some important information about quality of care is missed when only chart review is used.

  6. On the Mathematics behind the CUSUM Control Charts

    DEFF Research Database (Denmark)

    Madsen, Henrik

    1998-01-01

    This paper describes the mathematics behind CUSUM control charts. An introduction to CUSUM charts is found in (Madsen 1998).CUSUM charts are well suited for checking a measuring system in operation for any departure from some target or specified values. In general they can be used for:- detecting...... from CEN-TC 69. However the presentation in ISO/CD 7871 concentrates on the level, whereas CUSUM charts for detecting changes in the precision are not discussed.This document outlines the theory of CUSUM control charts, and both CUSUM procedures for detecting a drift as well as CUSUM procedures...

  7. Comparison of Snellen and Early Treatment Diabetic Retinopathy Study charts using a computer simulation

    Directory of Open Access Journals (Sweden)

    Reuben R. Shamir

    2016-01-01

    Full Text Available AIM: To compare accuracy, reproducibility and test duration for the Snellen and the Early Treatment Diabetic Retinopathy Study (ETDRS charts, two main tools used to measure visual acuity (VA. METHODS: A computer simulation was programmed to run multiple virtual patients, each with a unique set of assigned parameters, including VA, false-positive and false-negative error values. For each virtual patient, assigned VA was randomly chosen along a continuous scale spanning the range between 1.0 to 0.0 logMAR units (equivalent to 20/200 to 20/20. Each of 30 000 virtual patients were run ten times on each of the two VA charts. RESULTS: Average test duration (expressed as the total number of characters presented during the test ±SD was 12.6±11.1 and 31.2±14.7 characters, for the Snellen and ETDRS, respectively. Accuracy, defined as the absolute difference (± SD between the assigned VA and the measured VA, expressed in logMAR units, was superior in the ETDRS charts: 0.12±0.14 and 0.08±0.08, for the Snellen and ETDRS charts, respectively. Reproducibility, expressed as test-retest variability, was superior in the ETDRS charts: 0.23±0.17 and 0.11±0.09 logMAR units, for the Snellen and ETDRS charts, respectively. CONCLUSION: A comparison of true (assigned VA to measured VA, demonstrated, on average, better accuracy and reproducibility of the ETDRS chart, but at the penalty of significantly longer test duration. These differences were most pronounced in the low VA range. The reproducibility using a simulation approach is in line with reproducibility values found in several clinical studies.

  8. Combustion temperature charts for industrial gaseous fuels

    Energy Technology Data Exchange (ETDEWEB)

    Matouskova, V.; Gerak, A.; Hlavacka, V.

    1975-12-01

    Researchers at Czechoslovakia's State Research Institute of Mechanical Engineering offer a method for calculating the theoretical flame temperature that includes the effect of endothermic reactions, especially the dissociation of combustion products. Charts presented for eight types of fuel gases can be used to determine the flame temperature relative to the temperature of the combustion air and to the excess-air ratio. Also considered is the relationship between these parameters and the characteristic temperature relationships for equipment using heat recovered from the flue gases to preheat incoming combustion air.

  9. User's manual for the generalized computer program system. Open-channel flow and sedimentation, TABS-2. Main text

    Science.gov (United States)

    Thomas, W. A.; McAnally, W. H., Jr.

    1985-07-01

    TABS-2 is a generalized numerical modeling system for open-channel flows, sedimentation, and constituent transport. It consists of more than 40 computer programs to perform modeling and related tasks. The major modeling components--RMA-2V, STUDH, and RMA-4--calculate two-dimensional, depth-averaged flows, sedimentation, and dispersive transport, respectively. The other programs in the system perform digitizing, mesh generation, data management, graphical display, output analysis, and model interfacing tasks. Utilities include file management and automatic generation of computer job control instructions. TABS-2 has been applied to a variety of waterways, including rivers, estuaries, bays, and marshes. It is designed for use by engineers and scientists who may not have a rigorous computer background. Use of the various components is described in Appendices A-O. The bound version of the report does not include the appendices. A looseleaf form with Appendices A-O is distributed to system users.

  10. Sediment and radionuclide transport in rivers. Phase I: field sampling program during mean flow Cattaraugus and Buttermilk Creeks, New York

    Energy Technology Data Exchange (ETDEWEB)

    Ecker, R.M.; Onishi, Y.

    1979-08-01

    A field sampling program was conducted on Cattaraugus and Buttermilk Creeks, New York during November and December 1977 to investigate the transport of radionuclides in surface waters as part of a continuing program to provide data for application and verification of Pacific Northwest Laboratory's (PNL) sediment and radionuclide transport model, SERATRA. Suspended sediment, bed sediment, and water samples were collected during mean flow conditions over a 45 mile reach of stream channel. Radiological analysis of these samples included primarily gamma ray emitters; however, some plutonium, strontium, curium, and tritium analyses were also included. The principal gamma emitter found during the sampling program was /sup 137/Cs where, in some cases, levels associated with the sand and clay size fractions of bed sediment exceeded 100 pCi/g. Elevated levels of /sup 137/Cs and /sup 90/Sr were found downstream of the Nuclear Fuel Services Center, an inactive plutonium reprocessing plant and low level nuclear waste disposal site. Based on radionuclide levels in upstream control stations, /sup 137/Cs was the only radionuclide whose levels in the creeks downstream of the site could confidently be attributed to the site during this sampling program. This field sampling effort is the first of a three phase program to collect data during low, medium and high flow conditions.

  11. Code requirements document: MODFLOW 2. 1: A program for predicting moderator flow patterns

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, P.F. (Univ. of California, Berkeley (United States). Dept. of Nuclear Engineering); Paik, I.K. (Westinghouse Savannah River Co., Aiken, SC (United States))

    1992-03-01

    Sudden changes in the temperature of flowing liquids can result in transient buoyancy forces which strongly impact the flow hydrodynamics via flow stratification. These effects have been studied for the case of potential flow of stratified liquids to line sinks, but not for moderator flow in SRS reactors. Standard codes, such as TRAC and COMMIX, do not have the capability to capture the stratification effect, due to strong numerical diffusion which smears away the hot/cold fluid interface. A related problem with standard codes is the inability to track plumes injected into the liquid flow, again due to numerical diffusion. The combined effects of buoyant stratification and plume dispersion have been identified as being important in operation of the Supplementary Safety System which injects neutron-poison ink into SRS reactors to provide safe shutdown in the event of safety rod failure. The MODFLOW code discussed here provides transient moderator flow pattern information with stratification effects, and tracks the location of ink plumes in the reactor. The code, written in Fortran, is compiled for Macintosh II computers, and includes subroutines for interactive control and graphical output. Removing the graphics capabilities, the code can also be compiled on other computers. With graphics, in addition to the capability to perform safety related computations, MODFLOW also provides an easy tool for becoming familiar with flow distributions in SRS reactors.

  12. Code requirements document: MODFLOW 2.1: A program for predicting moderator flow patterns

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, P.F. [Univ. of California, Berkeley (US). Dept. of Nuclear Engineering; Paik, I.K. [Westinghouse Savannah River Co., Aiken, SC (US)

    1992-03-01

    Sudden changes in the temperature of flowing liquids can result in transient buoyancy forces which strongly impact the flow hydrodynamics via flow stratification. These effects have been studied for the case of potential flow of stratified liquids to line sinks, but not for moderator flow in SRS reactors. Standard codes, such as TRAC and COMMIX, do not have the capability to capture the stratification effect, due to strong numerical diffusion which smears away the hot/cold fluid interface. A related problem with standard codes is the inability to track plumes injected into the liquid flow, again due to numerical diffusion. The combined effects of buoyant stratification and plume dispersion have been identified as being important in operation of the Supplementary Safety System which injects neutron-poison ink into SRS reactors to provide safe shutdown in the event of safety rod failure. The MODFLOW code discussed here provides transient moderator flow pattern information with stratification effects, and tracks the location of ink plumes in the reactor. The code, written in Fortran, is compiled for Macintosh II computers, and includes subroutines for interactive control and graphical output. Removing the graphics capabilities, the code can also be compiled on other computers. With graphics, in addition to the capability to perform safety related computations, MODFLOW also provides an easy tool for becoming familiar with flow distributions in SRS reactors.

  13. APPLICATION OF MULTIVARIATE CONTROL CHARTS FOR MONITORING AN INDUSTRIAL PROCESS

    Directory of Open Access Journals (Sweden)

    Custodio da Cunha Alves

    2013-12-01

    Full Text Available The effective simultaneous monitoring of the many quality characteristics of a production process often depends on statistical tools that are becoming more and more specific. The goal of this paper is to investigate, via an industrial application, if there are significant differences in sensitivity between the use of Multivariate Cumulative Sum (MCUSUM, Multivariate Exponentially Weighted Average (MEWMA control charts and Hotelling T2 charts in the detection of small changes in the vector of means of the process. In doing this study, we used real data from a machining process. A MCUSUM control chart was applied to monitor the two quality characteristics of this process simultaneously. A MEWMA chart was also applied. The result was compared to the application of the Hotelling T2 chart, which showed that the MCUSUM and MEWMA control charts detected the change sooner. This study was fundamental in defining the best choice between the three charts for the multivariate statistical analysis of this industrial process.

  14. Four Experiments on the Perception of Bar Charts.

    Science.gov (United States)

    Talbot, Justin; Setlur, Vidya; Anand, Anushka

    2014-12-01

    Bar charts are one of the most common visualization types. In a classic graphical perception paper, Cleveland & McGill studied how different bar chart designs impact the accuracy with which viewers can complete simple perceptual tasks. They found that people perform substantially worse on stacked bar charts than on aligned bar charts, and that comparisons between adjacent bars are more accurate than between widely separated bars. However, the study did not explore why these differences occur. In this paper, we describe a series of follow-up experiments to further explore and explain their results. While our results generally confirm Cleveland & McGill's ranking of various bar chart configurations, we provide additional insight into the bar chart reading task and the sources of participants' errors. We use our results to propose new hypotheses on the perception of bar charts.

  15. Experiencing flow in different types of physical activity intervention programs: three randomized studies

    DEFF Research Database (Denmark)

    Elbe, Anne-Marie; Strahler, K.; Krustrup, Peter

    2010-01-01

    exercise intervention groups experience rather high levels of flow regardless of whether the intervention is a team or individual sport. Differences in experiencing flow, worry and exertion as well as physiological improvements could be found for the different types of sports and the two genders......This study explores whether inactive individuals can experience flow, a rewarding, psychological state, during an exercise intervention and if there are differences according to the type of intervention they perform. Furthermore, the study investigates if experiencing flow is connected......, with the male football group having the highest score for physiological improvement and the lowest score for worry. A connection between experiencing flow and physiological improvement could not be found. Future research should investigate the influence that the participant's gender and also the type of sport...

  16. Percentile growth charts for biomedical studies using a porcine model.

    Science.gov (United States)

    Corson, A M; Laws, J; Laws, A; Litten, J C; Lean, I J; Clarke, L

    2008-12-01

    Increasing rates of obesity and heart disease are compromising quality of life for a growing number of people. There is much research linking adult disease with the growth and development both in utero and during the first year of life. The pig is an ideal model for studying the origins of developmental programming. The objective of this paper was to construct percentile growth curves for the pig for use in biomedical studies. The body weight (BW) of pigs was recorded from birth to 150 days of age and their crown-to-rump length was measured over the neonatal period to enable the ponderal index (PI; kg/m3) to be calculated. Data were normalised and percentile curves were constructed using Cole's lambda-mu-sigma (LMS) method for BW and PI. The construction of these percentile charts for use in biomedical research will allow a more detailed and precise tracking of growth and development of individual pigs under experimental conditions.

  17. MPSalsa Version 1.5: A Finite Element Computer Program for Reacting Flow Problems: Part 1 - Theoretical Development

    Energy Technology Data Exchange (ETDEWEB)

    Devine, K.D.; Hennigan, G.L.; Hutchinson, S.A.; Moffat, H.K.; Salinger, A.G.; Schmidt, R.C.; Shadid, J.N.; Smith, T.M.

    1999-01-01

    The theoretical background for the finite element computer program, MPSalsa Version 1.5, is presented in detail. MPSalsa is designed to solve laminar or turbulent low Mach number, two- or three-dimensional incompressible and variable density reacting fluid flows on massively parallel computers, using a Petrov-Galerkin finite element formulation. The code has the capability to solve coupled fluid flow (with auxiliary turbulence equations), heat transport, multicomponent species transport, and finite-rate chemical reactions, and to solve coupled multiple Poisson or advection-diffusion-reaction equations. The program employs the CHEMKIN library to provide a rigorous treatment of multicomponent ideal gas kinetics and transport. Chemical reactions occurring in the gas phase and on surfaces are treated by calls to CHEMKIN and SURFACE CHEMK3N, respectively. The code employs unstructured meshes, using the EXODUS II finite element database suite of programs for its input and output files. MPSalsa solves both transient and steady flows by using fully implicit time integration, an inexact Newton method and iterative solvers based on preconditioned Krylov methods as implemented in the Aztec. solver library.

  18. Ecological effects of a long-term flood program in a flow-regulated river

    Directory of Open Access Journals (Sweden)

    Sabine Mannes

    2009-03-01

    Full Text Available Le régime hydrologique naturel de la grande majorité des rivières du globe a été modifié par une régulation artificielle, qui a profondément affecté la morphologie fluviale et la vie aquatique. L’intégration de critères hydrologiques comme le débit et la température dans les programmes de restauration constitue une étape importante pour la gestion de rivière. Cet article synthétise les observations, en terme de qualité physicochimique de l’eau et de biocénose aquatique, des effets d’une programmation de crues sur le long terme (15 crues artificielles en huit ans sur la rivière Spöl, dans le Parc National Suisse. Du fait des lâchers d’eau hypolimnétiques (issues des eaux profondes, ces crues ont peu d’impact sur les paramètres physiques et chimiques. La biomasse du périphyton a été réduite par les premières crues, puis s’est maintenue à des niveaux faibles pendant toute la période étudiée. La richesse spécifique, la biomasse et la densité de macro-invertébrés ont aussi été significativement réduites, et l’association de macroinvertébrés a évolué vers des taxons plus résistants aux perturbations. La qualité des habitats piscicoles, en particulier pour les zones de frai, a été sensiblement améliorée par les inondations. Une analyse plus approfondie a montré que la réponse de la biocénose à des crues d’ampleur similaire a changé pendant la période d’étude en parallèle avec la modification de la composition des associations biotiques.The natural flow regime of many rivers on the globe has been altered by regulation, strongly influencing river morphology and aquatic biota. The incorporation of regimebased criteria such as flow and temperature regimes in restoration plans is an important step in river management. This paper summarizes the effects of a long-term flood program (15 floods over 8 years on the river Spöl, Swiss National Park, on water physico-chemistry and river

  19. A paediatric X-ray exposure chart

    Energy Technology Data Exchange (ETDEWEB)

    Knight, Stephen P, E-mail: stephen.knight@health.qld.gov.au [Department of Medical Imaging, Royal Children' s Hospital, Brisbane, Queensland (Australia)

    2014-09-15

    The aim of this review was to develop a radiographic optimisation strategy to make use of digital radiography (DR) and needle phosphor computerised radiography (CR) detectors, in order to lower radiation dose and improve image quality for paediatrics. This review was based on evidence-based practice, of which a component was a review of the relevant literature. The resulting exposure chart was developed with two distinct groups of exposure optimisation strategies – body exposures (for head, trunk, humerus, femur) and distal extremity exposures (elbow to finger, knee to toe). Exposure variables manipulated included kilovoltage peak (kVp), target detector exposure and milli-ampere-seconds (mAs), automatic exposure control (AEC), additional beam filtration, and use of antiscatter grid. Mean dose area product (DAP) reductions of up to 83% for anterior–posterior (AP)/posterior–anterior (PA) abdomen projections were recorded postoptimisation due to manipulation of multiple-exposure variables. For body exposures, the target EI and detector exposure, and thus the required mAs were typically 20% less postoptimisation. Image quality for some distal extremity exposures was improved by lowering kVp and increasing mAs around constant entrance skin dose. It is recommended that purchasing digital X-ray equipment with high detective quantum efficiency detectors, and then optimising the exposure chart for use with these detectors is of high importance for sites performing paediatric imaging. Multiple-exposure variables may need to be manipulated to achieve optimal outcomes.

  20. Quality control chart for crushed granite concrete

    Directory of Open Access Journals (Sweden)

    Ewa E. DESMOND

    2016-07-01

    Full Text Available A chart for assessing in-situ grade (strength of concrete, has been developed in this study. Four grades of concrete after the Nigerian General Specification for Roads and bridges (NGSRB-C20, C25, C30 and C35, is studied at different water-cement ratios for medium and high slump range. The concrete mixes are made from crushed granite rock as coarse aggregate with river sand as fine aggregate. Compression test on specimens are conducted at curing age of 1, 3, 7, 14, 21, 28 and 56 days. Results on concrete workability from slump values, and water-cement ratios revealed that specimens with lower water-cement ratio were less workable but had higher strength, compared to mixes with higher water cement ratio. A simple algorithm using nonlinear regression analysis performed on each experimental data set produced Strength-Age (S-A curves which were used to establish a quality control chart. The accuracy of these curves were evaluated by computing average absolute error (AAS, the error of estimate (EoE and the average absolute error of estimate (Abs EoE for each concrete mix. These were done based on the actual average experimental strengths to measure how close the predicted values are to the experimental data set. The absolute average error of estimate (Abs. EoE recorded was less than ±10% tolerance zone for concrete works.

  1. A parallel program for numerical simulation of discrete fracture network and groundwater flow

    Science.gov (United States)

    Huang, Ting-Wei; Liou, Tai-Sheng; Kalatehjari, Roohollah

    2017-04-01

    The ability of modeling fluid flow in Discrete Fracture Network (DFN) is critical to various applications such as exploration of reserves in geothermal and petroleum reservoirs, geological sequestration of carbon dioxide and final disposal of spent nuclear fuels. Although several commerical or acdametic DFN flow simulators are already available (e.g., FracMan and DFNWORKS), challenges in terms of computational efficiency and three-dimensional visualization still remain, which therefore motivates this study for developing a new DFN and flow simulator. A new DFN and flow simulator, DFNbox, was written in C++ under a cross-platform software development framework provided by Qt. DFNBox integrates the following capabilities into a user-friendly drop-down menu interface: DFN simulation and clipping, 3D mesh generation, fracture data analysis, connectivity analysis, flow path analysis and steady-state grounwater flow simulation. All three-dimensional visualization graphics were developed using the free OpenGL API. Similar to other DFN simulators, fractures are conceptualized as random point process in space, with stochastic characteristics represented by orientation, size, transmissivity and aperture. Fracture meshing was implemented by Delaunay triangulation for visualization but not flow simulation purposes. Boundary element method was used for flow simulations such that only unknown head or flux along exterior and interection bounaries are needed for solving the flow field in the DFN. Parallel compuation concept was taken into account in developing DFNbox for calculations that such concept is possible. For example, the time-consuming seqential code for fracture clipping calculations has been completely replaced by a highly efficient parallel one. This can greatly enhance compuational efficiency especially on multi-thread platforms. Furthermore, DFNbox have been successfully tested in Windows and Linux systems with equally-well performance.

  2. A Literature Review on the Fuzzy Control Chart; Classifications & Analysis

    Directory of Open Access Journals (Sweden)

    Mohammad Hossein Zavvar Sabegh

    2014-08-01

    Full Text Available Quality control plays an important role in increasing the product quality. Fuzzy control charts are more sensitive than Shewhart control chart. Hence, the correct use of fuzzy control chart leads to producing better-quality products. This area is complex because it involves a large scope of industries, and information is not well organized. In this research, we provide a literature review of the control chart under a fuzzy environment with proposing several classifications and analysis. Moreover, our research considered both attribute and variable control chart by analyzing the related researches based on the content analysis method, to classify past and current developments in the fuzzy control chart. This work has included a distribution of articles according to the journal, the case studies related to fuzzy control chart, the percentage of types of fuzzy control charts used in the literature, performance evaluation of the fuzzy control chart and summary of key points of each review paper. Finally, this paper discusses some future research direction and our overviews. The results of this study can help researchers become familiar with well-known journals, fuzzy control charts used in sample case studies, and to extract key points of each paper in minimum time.

  3. Epitrochoid Power-Law Nozzle Rapid Prototype Build/Test Project (Briefing Charts)

    Science.gov (United States)

    2015-02-01

    Power-Law Nozzle Rapid Prototype Build/Test Project Mr. Eric J. Paulson-Vehicle Analyst Rocket Propulsion Division Combustion devices Branch Systems...to build axisymmetric cold flow nozzle test articles using plastic-based inexpensive rapid additive manufacturing – Feasible to rapid prototype lobed...Briefing Charts 3. DATES COVERED (From - To) February 2015-March 2015 4. TITLE AND SUBTITLE Epitrochoid Power-Law Nozzle Rapid Prototype Build/Test

  4. Numerical Implementation of Indicators and Statistical Control Tools in Monitoring and Evaluating CACEI-ISO Indicators of Study Program in Industrial Process by Systematization

    Science.gov (United States)

    Ayala, Gabriela Cota; Real, Francia Angélica Karlos; Ivan, Ramirez Alvarado Edqar

    2016-01-01

    The research was conducted to determine if the study program of the career of industrial processes Technological University of Chihuahua, 1 year after that it was certified by CACEI, continues achieving the established indicators and ISO 9001: 2008, implementing quality tools, monitoring of essential indicators are determined, flow charts are…

  5. A Program for Computing Steady Inviscid Three-Dimensional Supersonic Flow on Reentry Vehicles. Volume I: Analysis and Programming

    Science.gov (United States)

    1977-02-11

    values of U at (Z X ,Y) from which predicted values of the flow quantities P,u,v,w,p can be determined using the definicions (2.1a), (2.2), and the...3NC,MRp.CUP(3,hIC.MR) .OZ0DCPHZ) D3CSS 607 0UP4=CZ(M8) S DUMCP=CPmI( mol 03CSS 609 ICHECK-1 D3CSS 609 CALL DECODE(m CU,J2#NCMAX,MCMAX) 03CSS 610 B9=8(mg

  6. IGDS/TRAP Interface Program (ITIP). Software User Manual (SUM). [network flow diagrams for coal gasification studies

    Science.gov (United States)

    Jefferys, S.; Johnson, W.; Lewis, R.; Rich, R.

    1981-01-01

    This specification establishes the requirements, concepts, and preliminary design for a set of software known as the IGDS/TRAP Interface Program (ITIP). This software provides the capability to develop at an Interactive Graphics Design System (IGDS) design station process flow diagrams for use by the NASA Coal Gasification Task Team. In addition, ITIP will use the Data Management and Retrieval System (DMRS) to maintain a data base from which a properly formatted input file to the Time-Line and Resources Analysis Program (TRAP) can be extracted. This set of software will reside on the PDP-11/70 and will become the primary interface between the Coal Gasification Task Team and IGDS, DMRS, and TRAP. The user manual for the computer program is presented.

  7. Charting a Path Toward a Sustainable ROK Space Program

    Science.gov (United States)

    2016-12-01

    Korea Multi-purpose Satellite KSLV Korea Space Launch Vehicle KSR Korea Sounding Rocket LEO low-earth orbit MOST Ministry of Science and Technology...science and technology development, announced that it “successfully launched a small satellite in low-earth orbit (LEO) on January 30, 2013,”3 plans...and place in orbit communications satellites , another to foster indigenous technology, starting with small satellites and launching them into low

  8. THE CHART ROMANIA-NATO-UE

    Directory of Open Access Journals (Sweden)

    Duduială Popescu Lorena

    2009-05-01

    Full Text Available viewed in the context of geopolitical and geostrategic current and through the elements of distinction in terms of identity and cultural institutions, chart Romania - NATO / Israel - EU stands under the sign of the common interest channel, firstly, on common values and hence the collective interests of the partners involved in the two organizational structures. Noteworthy in this context is the extent of bilateral involvement of Romania in the bodies and the politico-military, represented by NATO (the North Atlantic Treaty Organization, which is primarily military values and the construction superstate permanent expansion and development - European Union , both generating as much for our country as obligations of a politico-military security, and economic, social, institutional, cultural.

  9. An eye chart for Edgar Degas.

    Science.gov (United States)

    Marmor, Michael F

    2013-10-01

    The French Impressionist painter Edgar Degas had progressive visual loss from a type of maculopathy during the last 40 years of his life. The effects of this visual failure are evident in a comparison of early and later pastels, which shows a loss of precision in outlining, shading, and detail over the years. A remarkable oil painting, Scene from the Steeplechase: The Fallen Jockey, provides on one canvas an historical record of his visual struggles. It was begun in 1866 and reworked in 1880 and 1897, during which his visual acuity fell from near normal to 20/200. Computer simulations show Degas' own view of this painting at each of these times and demonstrate how his style changed: details became rougher and larger in correspondence with his failing acuity. The painting is an eye chart of his career.

  10. Prosopography, prosoporecognography and the Prosoporecognographical Chart.

    Science.gov (United States)

    Santos-Filho, E F; Pereira, H B B

    2017-11-01

    Recognizing and identifying an individual based on his or her face is a technical and scientific challenge and the objective of our investigation. This article's goal is to establish a method, a foundation and an instrument for carrying out the process of recognizing and identifying an individual. Both the construction of the term and the deepening, conceptualization and epistemology of the process of describing and representing the face through a particular method of recognizing and identifying individuals are described in this article. The proposal of the Prosoporecognographical Chart is an important step in the facial-identification process, establishing taxonomic parameters for the phenotypic manifestations of the elements constituting the face. Based on the proposal presented here, the construction of a protocol for the process of recognizing and identifying an individual can be implemented computationally. Copyright © 2017. Published by Elsevier Ltd.

  11. Comprehensive study on parameter sensitivity for flow and nutrient modeling in the Hydrological Simulation Program Fortran model.

    Science.gov (United States)

    Luo, Chuan; Li, Zhaofu; Wu, Min; Jiang, Kaixia; Chen, Xiaomin; Li, Hengpeng

    2017-09-01

    Numerous parameters are used to construct the HSPF (Hydrological Simulation Program Fortran) model, which results in significant difficulty in calibrating the model. Parameter sensitivity analysis is an efficient method to identify important model parameters. Through this method, a model's calibration process can be simplified on the basis of understanding the model's structure. This study investigated the sensitivity of the flow and nutrient parameters of HSPF using the DSA (differential sensitivity analysis) method in the Xitiaoxi watershed, China. The results showed that flow was mostly affected by parameters related to groundwater and evapotranspiration, including DEEPFR (fraction of groundwater inflow to deep recharge), LZETP (lower-zone evapotranspiration parameter), and AGWRC (base groundwater recession), and most of the sensitive parameters had negative and nonlinear effects on flow. Additionally, nutrient components were commonly affected by parameters from land processes, including MON-SQOLIM (monthly values limiting storage of water quality in overland flow), MON-ACCUM (monthly values of accumulation), MON-IFLW-CONC (monthly concentration of water quality in interflow), and MON-GRND-CONC (monthly concentration of water quality in active groundwater). Besides, parameters from river systems, KATM20 (unit oxidation rate of total ammonia at 20 °C) had a negative and almost linear effect on ammonia concentration and MALGR (maximal unit algal growth rate for phytoplankton) had a negative and nonlinear effect on ammonia and orthophosphate concentrations. After calibrating these sensitive parameters, our model performed well for simulating flow and nutrient outputs, with R 2 and ENS (Nash-Sutcliffe efficiency) both greater than 0.75 for flow and greater than 0.5 for nutrient components. This study is expected to serve as a valuable complement to the documentation of the HSPF model to help users identify key parameters and provide a reference for performing

  12. Comparison of the visual acuity after photorefractive keratectomy using Early Treatment Diabetic Retinopathy Study Chart and E-chart.

    Science.gov (United States)

    Ghorbanhosseini, Saeedeh; Hashemi, Hassan; Jafarzadehpur, Ebrahim; Yekta, Abbasali; Khabazkhoob, Mehdi

    2016-12-01

    To compare the visual responses of post refractive surgery's patients using Early Treatment Diabetic Retinopathy Study Chart (ETDRS) and E-chart with and without color filters. The uncorrected Logarithm of the Minimum Angle of Resolution Visual Acuity (LogMAR VA) of 70 patients with a mean age of 26.2 ± 3.76 years (from 19 to 34 years) who had undergone Photorefractive Keratectomy (PRK) (the range of post operation refractive error: ±0.5 D) was measured under the light conditions of with and without asymmetrical glare by using red, green, and yellow filters and ETDRS chart and E-chart. In both light conditions of with and without glare, the mean visual acuity of the three filters in the right and left eyes was significantly better with the E-chart versus the ETDRS chart (P charts using the red filter (P = 0.30). Visual acuity measurements were different with ETDRS chart and E-chart. These two charts cannot be used interchangeably.

  13. Quality assessment program for EuroFlow protocols: summary results of four-year (2010-2013) quality assurance rounds.

    Science.gov (United States)

    Kalina, Tomas; Flores-Montero, Juan; Lecrevisse, Quentin; Pedreira, Carlos E; van der Velden, Vincent H J; Novakova, Michaela; Mejstrikova, Ester; Hrusak, Ondrej; Böttcher, Sebastian; Karsch, Dennis; Sędek, Łukasz; Trinquand, Amelie; Boeckx, Nancy; Caetano, Joana; Asnafi, Vahid; Lucio, Paulo; Lima, Margarida; Helena Santos, Ana; Bonaccorso, Paola; van der Sluijs-Gelling, Alita J; Langerak, Anton W; Martin-Ayuso, Marta; Szczepański, Tomasz; van Dongen, Jacques J M; Orfao, Alberto

    2015-02-01

    Flow cytometric immunophenotyping has become essential for accurate diagnosis, classification, and disease monitoring in hemato-oncology. The EuroFlow Consortium has established a fully standardized "all-in-one" pipeline consisting of standardized instrument settings, reagent panels, and sample preparation protocols and software for data analysis and disease classification. For its reproducible implementation, parallel development of a quality assurance (QA) program was required. Here, we report on the results of four consecutive annual rounds of the novel external QA EuroFlow program. The novel QA scheme aimed at monitoring the whole flow cytometric analysis process (cytometer setting, sample preparation, acquisition and analysis) by reading the median fluorescence intensities (MedFI) of defined lymphocytes' subsets. Each QA participant applied the predefined reagents' panel on blood cells of local healthy donors. A uniform gating strategy was applied to define lymphocyte subsets and to read MedFI values per marker. The MedFI values were compared with reference data and deviations from reference values were quantified using performance score metrics. In four annual QA rounds, we analyzed 123 blood samples from local healthy donors on 14 different instruments in 11 laboratories from nine European countries. The immunophenotype of defined cellular subsets appeared sufficiently standardized to permit unified (software) data analysis. The coefficient of variation of MedFI for 7 of 11 markers performed repeatedly below 30%, average MedFI in each QA round ranged from 86 to 125% from overall median. Calculation of performance scores was instrumental to pinpoint standardization failures and their causes. Overall, the new EuroFlow QA system for the first time allowed to quantify the technical variation that is introduced in the measurement of fluorescence intensities in a multicentric setting over an extended period of time. EuroFlow QA is a proficiency test specific for

  14. Process control charts in infection prevention: Make it simple to make it happen.

    Science.gov (United States)

    Wiemken, Timothy L; Furmanek, Stephen P; Carrico, Ruth M; Mattingly, William A; Persaud, Annuradha K; Guinn, Brian E; Kelley, Robert R; Ramirez, Julio A

    2017-03-01

    Quality improvement is central to Infection Prevention and Control (IPC) programs. Challenges may occur when applying quality improvement methodologies like process control charts, often due to the limited exposure of typical IPs. Because of this, our team created an open-source database with a process control chart generator for IPC programs. The objectives of this report are to outline the development of the application and demonstrate application using simulated data. We used Research Electronic Data Capture (REDCap Consortium, Vanderbilt University, Nashville, TN), R (R Foundation for Statistical Computing, Vienna, Austria), and R Studio Shiny (R Foundation for Statistical Computing) to create an open source data collection system with automated process control chart generation. We used simulated data to test and visualize both in-control and out-of-control processes for commonly used metrics in IPC programs. The R code for implementing the control charts and Shiny application can be found on our Web site (https://github.com/ul-research-support/spcapp). Screen captures of the workflow and simulated data indicating both common cause and special cause variation are provided. Process control charts can be easily developed based on individual facility needs using freely available software. Through providing our work free to all interested parties, we hope that others will be able to harness the power and ease of use of the application for improving the quality of care and patient safety in their facilities. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  15. Bicycle injury documentation before and after charting intervention.

    Science.gov (United States)

    Monroe, Kathy; Nichols, Michele; Bates, Robin; Meredith, Mark; Hunter, John; King, William D

    2008-07-01

    Previous studies have shown that routinely completed free-text emergency department medical records contain limited information necessary for injury surveillance. We instituted an injury documentation sheet into our emergency department records to evaluate the impact on completeness of bicycle injury documentation rates. The pretest/posttest study design used E-codes to identify bicycle-related injuries. A standardized data collection tool was utilized to review these charts. Time periods before (January 1 to December 31, 2004) and after (January 1 to June 30, 2005) institution of a standardized documentation sheet were reviewed. Data were entered into the computer program, Epistat, and scores were used for comparison. Initial review (n = 667) revealed mean age of patients 8.6 years, with 46% African American and 67% male. Helmet usage was documented in 49% of the charts (81 were wearing helmets; 245 were not wearing helmets). Mechanism of injury was documented as bicycle alone in 587, bicycle versus car in 13, and bicycle versus stationary object in 64. After implementation of an injury data sheet (n = 205), it was found that the mean age was 9.24 years, with 51% African American and 43% male. Helmet use was documented in 77% of cases (26 wearing helmets; 132 not wearing). Mechanism was documented as bicycle alone in 125, bicycle versus car in 66, and bicycle versus stationary object in 14. Helmet use was much more frequently documented after the initiation of an injury documentation reminder sheet (z = 6.97; P < 0.001; 95% confidence interval, 20.2-35.8). The use of standard injury documentation prompts increased completeness of documentation. With improved documentation, more accurate injury surveillance can be performed.

  16. Time geography: a model for psychiatric life charting?

    OpenAIRE

    Sunnqvist, Charlotta; Persson, Ulla; Lenntorp, B; Träskman Bendz, Lil

    2007-01-01

    Since many years, life charting has been used to describe the life course and life events of psychiatric patients. The aim of the present study was to describe and evaluate time geographic life. charts of 11 former psychiatric patients in order to promote systematic descriptions of their life events over time. Information on all events which was gathered from the life charts was analysed by manifest content analysis and reduced to four categories: information received by asking only about mov...

  17. Control charts 101: a guide to health care applications.

    Science.gov (United States)

    Amin, S G

    2001-01-01

    A control chart can be an effective way to display process data over time. It can differentiate common cause variation from special cause variation through the application of several probability-based interpretation rules. In addition, a control chart can be helpful in evaluating the effectiveness of a change. There are numerous types of control charts, and this tutorial was developed to guide the user through the selection process.

  18. The making of Andersen’s liquefaction chart

    DEFF Research Database (Denmark)

    Sabaliauskas, Tomas; Ibsen, Lars Bo

    Andersen’s chart (Andersen & Berre, 1999) is a graphical method of observing cyclic soil response. It allows observing soil response to various stress amplitudes that can lead to liquefaction, excess plastic deformation stabilizing soil response.The process of obtaining the original chart has been...... improved. Algorithm based approximation is introduced. Pore pressure dependent ultimate bearing capacity normalization factor is introduced to normalize the chart....

  19. Reactor mass flow data base prepared for the nonproliferation alternative systems assessment program

    Energy Technology Data Exchange (ETDEWEB)

    Primm III, R.T.C

    1981-02-01

    This report presents charge and discharge mass flow data for reactors judged to have received sufficient technical development to enable them to be demonstrated or commercially available by the year 2000. Brief descriptions of the reactors and fuel cycles evaluated are presented. A discussion of the neutronics methods used to produce the mass flow data is provided. Detailed charge and discharge fuel isotopics are presented. U/sub 3/O/sub 8/, separative work, and fissile material requirements are computed and provided for each fuel cycle.

  20. Control charts demonstrated limited utility for the monitoring of lung function in asthma.

    Science.gov (United States)

    Turner, Robin M; Hayen, Andrew; Macaskill, Petra; Irwig, Les; Reddel, Helen K

    2012-01-01

    Statistical process control charts have been advocated for use in monitoring of lung function in asthma. We aimed to evaluate their application in asthma using existing data from a randomized trial. Patients on optimal inhaled corticosteroid/bronchodilator therapy (n=81) were randomized to continue the same or change to corticosteroid alone. Baseline statistical control was assessed from 20 days of electronically recorded lung function (peak expiratory flow [PEF], forced expiratory volume in one second [FEV(1)]). The ability to detect lung function changes was assessed during 10 days after randomization. PEF measurements were in statistical control during baseline for only 59-79% of patients for different combinations of five control chart rules (e.g., Rule 1: >3 standard deviations outside mean and 95% expected to be in control), with similar proportions for FEV(1). After randomization, among those previously in statistical control, Rule 1 signaled lower FEV(1) for 35% of patients randomized to treatment change compared with 6% continuing baseline treatment (P=0.004). Control charts performed poorly for PEF, signaling a decrease for 8% of patients randomized to treatment change compared with 11% continuing treatment (P=0.7). A paradoxical increase was signaled for many patients continuing treatment. Control charts may not be suitable for use in many patients with asthma. Copyright © 2012 Elsevier Inc. All rights reserved.

  1. New standardized visual acuity charts in hindi and gujarati

    Directory of Open Access Journals (Sweden)

    Khamar Bakulesh

    1996-01-01

    Full Text Available Conventional Snellen visual acuity chart has unequal difficulty score and irregular progression in letter size causing jumping effect at different visual acuity levels. There is also increase in number of letters from above downwards. Consequently one or two mistakes per line has different meaning of visual acuity at different levels. We designed a new visual acuity chart of fourteen lines in Hindi and Gujarati to facilitate standardization in visual acuity measurement. These charts are designed for use at six meter distance, and the illumination is provided from front. These charts provide a standardized way of measuring visual acuity using local languages.

  2. New standardized visual acuity charts in Hindi and Gujarati.

    Science.gov (United States)

    Khamar, B M; Vyas, U H; Desai, T M

    1996-09-01

    Conventional Snellen visual acuity chart has unequal difficulty score and irregular progression in letter size causing jumping effect at different visual acuity levels. There is also increase in number of letters from above downwards. Consequently one or two mistakes per line has different meaning of visual acuity at different levels. We designed a new visual acuity chart of fourteen lines in Hindi and Gujarati to facilitate standardization in visual acuity measurement. These charts are designed for use at six meter distance, and the illumination is provided from front. These charts provide a standardized way of measuring visual acuity using local languages.

  3. EPA Enforcement and Compliance History Online: Water Effluent Charts Downloads

    Data.gov (United States)

    U.S. Environmental Protection Agency — Detailed Discharge Monitoring Report (DMR) data supporting effluent charts for one Clean Water Act discharge permit. Includes effluent parameters, amounts discharged...

  4. EPA Enforcement and Compliance History Online: Water Effluent Charts Details

    Data.gov (United States)

    U.S. Environmental Protection Agency — Detailed Discharge Monitoring Report (DMR) data supporting effluent charts for one Clean Water Act discharge permit. Includes effluent parameters, amounts discharged...

  5. Report on the Program "Fluid-mediated particle transport in geophysical flows" at the Kavli Institute for Theoretical Physics, UC Santa Barbara, September 23 to December 12, 2013

    Science.gov (United States)

    Jenkins, James T.; Meiburg, Eckart; Valance, Alexandre

    2015-09-01

    The Kavli Institute of Theoretical Physics (KITP) program held at UC Santa Barbara in the fall of 2013 addressed the dynamics of dispersed particulate flows in the environment. By focusing on the prototypes of aeolian transport and turbidity currents, it aimed to establish the current state of our understanding of such two-phase flows, to identify key open questions, and to develop collaborative research strategies for addressing these questions. Here, we provide a brief summary of the program outcome.

  6. Improved real gas routines for Sandia's NASA Ames flow field program

    Energy Technology Data Exchange (ETDEWEB)

    Eaton, R.R.; Larson, D.E.

    1976-02-01

    The real gas subroutines in Sandia's version of the NASA Ames flow field code have been extensively revised. Using these modifications the required computer run time for a difficult high Mach number case has been reduced from 1330 seconds to 151 seconds. (auth)

  7. Pulmonary rehabilitation program including respiratory conditioning for chronic obstructive pulmonary disease (COPD): Improved hyperinflation and expiratory flow during tidal breathing.

    Science.gov (United States)

    Yoshimi, Kaku; Ueki, Jun; Seyama, Kuniaki; Takizawa, Makiko; Yamaguchi, Seiko; Kitahara, Eriko; Fukazawa, Shinji; Takahama, Yukiko; Ichikawa, Masako; Takahashi, Kazuhisa; Fukuchi, Yoshinosuke

    2012-06-01

    Pulmonary rehabilitation has generally relieved symptoms, strengthened exercise endurance and improved health-related quality of life (QOL) in patients with COPD, but recovery of pulmonary function remains questionable. This analysis of our innovative rehabilitation program is directed at documenting changes in patients' expiratory airflow limitation, pulmonary symptoms and QOL. This program is designed to provide "respiratory conditioning", a physical therapist-assisted intensive flexibility training that focuses on stretching and rib cage mobilization. Thirty-one patients with COPD who attended rehabilitation sessions at Juntendo University Hospital from 1999 to 2006 were analyzed. Pulmonary function, expiratory flow limitation during tidal breathing, six minute walk distance (6MWD), respiratory muscle strength, and St. George Respiratory Questionnaire (SGRQ) were measured before and after pulmonary rehabilitation. In participants ages 68±7 years, the FEV(1)% predicted was 39.3±15.7%. 6MWD, SGRQ and respiratory muscle strength were significantly improved after pulmonary rehabilitation. Although neither FEV(1)% predicted nor FEV(1)/FVC was affected to a significant extent, indicating little effect on airflow limitation, expiratory flow limitation in supine as well as seated during tidal breathing improved significantly. Moreover, rehabilitation significantly diminished TLC% predicted, FRC% predicted, RV% predicted and RV/TLC values, thus indicating a reduction of hyperinflation of the lungs at rest. The present results suggest that our rehabilitation program with respiratory conditioning significantly lowered the hyperinflation of lungs at rest as well as the expiratory flow limitation during tidal breathing. In patients with COPD, overall pulmonary function improved, exercise endurance increased and health-related QOL was enhanced.

  8. Culvert Analysis Program Graphical User Interface 1.0--A preprocessing and postprocessing tool for estimating flow through culvert

    Science.gov (United States)

    Bradley, D. Nathan

    2013-01-01

    The peak discharge of a flood can be estimated from the elevation of high-water marks near the inlet and outlet of a culvert after the flood has occurred. This type of discharge estimate is called an “indirect measurement” because it relies on evidence left behind by the flood, such as high-water marks on trees or buildings. When combined with the cross-sectional geometry of the channel upstream from the culvert and the culvert size, shape, roughness, and orientation, the high-water marks define a water-surface profile that can be used to estimate the peak discharge by using the methods described by Bodhaine (1968). This type of measurement is in contrast to a “direct” measurement of discharge made during the flood where cross-sectional area is measured and a current meter or acoustic equipment is used to measure the water velocity. When a direct discharge measurement cannot be made at a streamgage during high flows because of logistics or safety reasons, an indirect measurement of a peak discharge is useful for defining the high-flow section of the stage-discharge relation (rating curve) at the streamgage, resulting in more accurate computation of high flows. The Culvert Analysis Program (CAP) (Fulford, 1998) is a command-line program written in Fortran for computing peak discharges and culvert rating surfaces or curves. CAP reads input data from a formatted text file and prints results to another formatted text file. Preparing and correctly formatting the input file may be time-consuming and prone to errors. This document describes the CAP graphical user interface (GUI)—a modern, cross-platform, menu-driven application that prepares the CAP input file, executes the program, and helps the user interpret the output

  9. Flow rates for sharp-edged orifices

    Science.gov (United States)

    Groesbeck, W. A.; Manning, F. L.

    1975-01-01

    Two charts are proposed for calculating the flow coefficient and the area correction factor used in the equation for the flow rate through a sharp-edged orifice. The proposed charts account for variations in the discharge coefficient of sharp-edged orifices and can be used with any pressure ratio for both subcritical and supercritical flow conditions. They can also be used for any gas by using the appropriate gas constant and ratio of specific heats. The application of the charts is illustrated by examples.

  10. HydroHillChart – Francis module. Software used to Calculate the Hill Chart of the Francis Hydraulic Turbines

    Directory of Open Access Journals (Sweden)

    Dorian Nedelcu

    2015-07-01

    Full Text Available The paper presents the Hydro Hill Chart - Francis module application, used to calculate the hill chart of the Pelton, Francis and Kaplan hydraulic turbine models, by processing the data measured on the stand. After describing the interface and menu, the input data is graphically presented and the universal characteristic for measuring scenarios ao=const. and n11=const is calculated. Finally, the two calculated hill charts are compared through a graphical superimposition of the isolines.

  11. Klamath Basin Restoration Agreement Off-Project Water Program Sub-basin Analysis Flow Statistics

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — VERSION 5/15/2012 HYDROLOGICAL INFORMATION PRODUCTS FOR THE OFF-PROJECT WATER PROGRAM OF THE KLAMATH BASIN RESTORATION AGREEMENT By Daniel T. Snyder, John C. Risley,...

  12. Growth charts for Australian children with achondroplasia.

    Science.gov (United States)

    Tofts, Louise; Das, Sandeep; Collins, Felicity; Burton, Karen L O

    2017-08-01

    Achondroplasia is an autosomal dominant disorder, the most common genetic cause of short stature in humans. Reference curves for head circumference, weight, height, and BMI are needed in clinical practice but none exist for the Australian population. This study aimed to produce head circumference, height, weight, and BMI reference percentile curves for Australian children and adolescents with achondroplasia. Measurements of head circumference, height and weight taken at clinical visits were retrospectively extracted from the electronic medical record. Age was corrected for prematurity. Patients were excluded from head circumference analysis if they had significant neurosurgical complications and from the weight and BMI analysis when they had a clinical diagnosis of overweight. Measurements were available on 138 individuals (69 males and 69 females) taken between 1970 and 2015, with over 50% collected since 2005. A total of 3,352 data points were available. The LMS method was used to produce growth charts with estimated centiles (10, 25, 50, 75, and 90th) separately for males and females. For females birth weight was 3 kg (2.5-3.5 kg), birth length 48 cm (44-50 cm) and head circumference 37.5 cm (36-39 cm), adult height was 125 cm (116-132 cm), weight 42 kg (34-54 kg), and head circumference 58 cm (55.5-60.5 cm) all 50th centile (10-90th). For males birth weight was 3.5 kg (3-4 kg), length 49 cm (46-52 cm) and head circumference 38.5 cm (36-41 cm), adult height was 134 cm (125-141 cm), weight 41 kg (24.5-57 kg) and head circumference 61 cm (58-64 cm). The curves are similar to previously published reference data from the USA and have expected population wide variation from curves from an Argentinian population. Despite limitations of our curves for adolescents (12 years and older) due to data paucity, these Australian growth charts for children and adolescents with achondroplasia will be a useful reference in clinical

  13. Exact solutions to traffic density estimation problems involving the Lighthill-Whitham-Richards traffic flow model using mixed integer programming

    KAUST Repository

    Canepa, Edward S.

    2012-09-01

    This article presents a new mixed integer programming formulation of the traffic density estimation problem in highways modeled by the Lighthill Whitham Richards equation. We first present an equivalent formulation of the problem using an Hamilton-Jacobi equation. Then, using a semi-analytic formula, we show that the model constraints resulting from the Hamilton-Jacobi equation result in linear constraints, albeit with unknown integers. We then pose the problem of estimating the density at the initial time given incomplete and inaccurate traffic data as a Mixed Integer Program. We then present a numerical implementation of the method using experimental flow and probe data obtained during Mobile Century experiment. © 2012 IEEE.

  14. MPSalsa a finite element computer program for reacting flow problems. Part 2 - user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Salinger, A.; Devine, K.; Hennigan, G.; Moffat, H. [and others

    1996-09-01

    This manual describes the use of MPSalsa, an unstructured finite element (FE) code for solving chemically reacting flow problems on massively parallel computers. MPSalsa has been written to enable the rigorous modeling of the complex geometry and physics found in engineering systems that exhibit coupled fluid flow, heat transfer, mass transfer, and detailed reactions. In addition, considerable effort has been made to ensure that the code makes efficient use of the computational resources of massively parallel (MP), distributed memory architectures in a way that is nearly transparent to the user. The result is the ability to simultaneously model both three-dimensional geometries and flow as well as detailed reaction chemistry in a timely manner on MT computers, an ability we believe to be unique. MPSalsa has been designed to allow the experienced researcher considerable flexibility in modeling a system. Any combination of the momentum equations, energy balance, and an arbitrary number of species mass balances can be solved. The physical and transport properties can be specified as constants, as functions, or taken from the Chemkin library and associated database. Any of the standard set of boundary conditions and source terms can be adapted by writing user functions, for which templates and examples exist.

  15. Control of wastewater using multivariate control chart

    Science.gov (United States)

    Nugraha, Jaka; Fatimah, Is; Prabowo, Rino Galang

    2017-03-01

    Wastewater treatment is a crucial process in industry cause untreated or improper treatment of wastewater may leads some problems affecting to the other parts of environmental aspects. For many kinds of wastewater treatments, the parameters of Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), and the Total Suspend Solid (TSS) are usual parameters to be controlled as a standard. In this paper, the application of multivariate Hotteling T2 Individual was reported to control wastewater treatment. By using wastewater treatment data from PT. ICBP, east Java branch, while the fulfillment of quality standards are based on East Java Governor Regulation No. 72 Year 2013 on Standards of Quality of Waste Water Industry and / or Other Business Activities. The obtained results are COD and TSS has a correlation with BOD values with the correlation coefficient higher than 50%, and it is is also found that influence of the COD and TSS to BOD values are 82% and 1.9% respectively. Based on Multivariate control chart Individual T2 Hotteling, it is found that BOD-COD and BOD-TSS are each one subgroup that are outside the control limits. Thus, it can be said there is a process that is not multivariate controlled, but univariately the variables of BOD, COD and TSS are within specification (standard quality) that has been determined.

  16. Charting the history of agricultural experiments.

    Science.gov (United States)

    Parolini, Giuditta

    2015-09-01

    Agricultural experimentation is a world in constant evolution, spanning multiple scientific domains and affecting society at large. Even though the questions underpinning agricultural experiments remain largely the same, the instruments and practices for answering them have changed constantly during the twentieth century with the advent of new disciplines like molecular biology, genomics, statistics, and computing. Charting this evolving reality requires a mapping of the affinities and antinomies at work within the realm of agricultural research, and a consideration of the practices, tools and social and political structures in which agricultural experiments are grounded. Three main questions will be addressed to provide an overview of the complex world of agricultural research investigated by the special issue: What is an agricultural experiment? Who is an experimenter in agriculture? Where do agricultural experiments take place? It will become apparent that agricultural experiments have a wide relevance for human development as they touch upon concerns related to human health and nutrition, contribute to policy discussions, and can affect the social and political structures in which farming is embedded.

  17. Model based control charts in stage 1 quality control

    NARCIS (Netherlands)

    A.J. Koning (Alex)

    1999-01-01

    textabstractIn this paper a general method of constructing control charts for preliminary analysis of individual observations is presented, which is based on recursive score residuals. A simulation study shows that certain implementations of these charts are highly effective in detecting assignable

  18. Negative Binomial charts for monitoring high-quality processes

    NARCIS (Netherlands)

    Albers, Willem/Wim

    Good control charts for high quality processes are often based on the number of successes between failures. Geometric charts are simplest in this respect, but slow in recognizing moderately increased failure rates p. Improvement can be achieved by waiting until r > 1 failures have occurred, i.e. by

  19. 46 CFR Figure 1 to Part 150 - Compatibility Chart

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Compatibility Chart 1 Figure 1 to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, Fig. 1 Figure 1 to Part 150—Compatibility Chart EC02FE91.079 ...

  20. Empirical nonparametric control charts for high-quality processes

    NARCIS (Netherlands)

    Albers, Willem/Wim

    For attribute data with (very) small failure rates often control charts are used which decide whether to stop or to continue each time r failures have occurred, for some r$\\geq$1. Because of the small probabilities involved, such charts are very sensitive to estimation effects. This is true in

  1. Integrated Interactive Chart as a Tool for Teaching Metabolic Pathways

    Science.gov (United States)

    Kalogiannis, Stavros; Pagkalos, Ioannis; Koufoudakis, Panagiotis; Dashi, Ino; Pontikeri, Kyriaki; Christodoulou, Constantina

    2014-01-01

    An interactive chart of energy metabolism with didactic function, complementary to the already existing metabolic maps, located at the URL www.metpath.teithe.gr is being presented. The chart illustrates the major catabolic and biosynthetic pathways of glucose, fatty acids, and aminoacids, individually as well as in an integrated view. For every…

  2. Empirical nonparametric control charts for high-quality processes

    NARCIS (Netherlands)

    Albers, Willem/Wim

    For attribute data with (very) small failure rates often control charts are used which decide whether to stop or to continue each time r failures have occurred, for some r ≥ 1. Because of the small probabilities involved, such charts are very sensitive to estimation effects. This is true in

  3. Nonparametric control charts for bivariate high-quality processes

    NARCIS (Netherlands)

    Albers, Willem/Wim

    For attribute data with (very) low rates of defectives, attractive control charts can be based on the maximum of subsequent groups of r failure times, for some suitable r≥1, like r=5. Such charts combine good performance with often highly needed robustness, as they allow a nonparametric adaptation

  4. Control charts for location based on different sampling schemes

    NARCIS (Netherlands)

    Mehmood, R.; Riaz, M.; Does, R.J.M.M.

    2013-01-01

    Control charts are the most important statistical process control tool for monitoring variations in a process. A number of articles are available in the literature for the X̄ control chart based on simple random sampling, ranked set sampling, median-ranked set sampling (MRSS), extreme-ranked set

  5. Estimation in Shewhart control charts: effects and corrections

    NARCIS (Netherlands)

    Albers, Willem/Wim; Kallenberg, W.C.M.

    2004-01-01

    The influence of the estimation of parameters in Shewhart control charts is investigated. It is shown by simulation and asymptotics that (very) large sample sizes are needed to accurately determine control charts if estimators are plugged in. Correction terms are developed to get accurate control

  6. Do RuralMothers Comprehend the Growth Chart | Ibekwe | Nigerian ...

    African Journals Online (AJOL)

    Background: Growth chart is an educational tool to motivate mothers to take appropriate action to maintain and or improve their child's nutrition. Its ability to performthis function depends on maternal comprehension. Objective: To determinematernal comprehension of the growth chart, and also identify factors that influence it.

  7. Reliability of FAMACHA© chart for the evaluation of anaemia in ...

    African Journals Online (AJOL)

    The reliability of FAMACHA© chart for identifying anaemic goats was compared with Packed Cell Volume (PCV). The colour of the lower eyelids was graded with FAMACHA© chart based on FAMACHA© scores (FS) of 1-5. The animals were scored from severely anaemic (white or FS 5) through moderately anaemic (pink or ...

  8. Charting Northern Skies with the Aid of a Spreadsheet.

    Science.gov (United States)

    Lucas, Keith B.

    1994-01-01

    Describes two types of star charts commonly available for astronomical viewing and outlines a strategy by which teachers can have students use a computer spreadsheet to prepare their own easy-to-use star charts appropriate for the location, date, and time of viewing. (Author/MKR)

  9. 47 CFR 73.699 - TV engineering charts.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false TV engineering charts. 73.699 Section 73.699 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Television Broadcast Stations § 73.699 TV engineering charts. This section consists of the following Figures...

  10. Designing new UK-WHO growth charts: implications for health staff use and understanding of charts and growth monitoring.

    Science.gov (United States)

    Wright, Charlotte M; Sachs, Magda; Short, John; Sharp, Laura; Cameron, Kirsty; Moy, Robert J

    2012-07-01

    New pre-school UK charts have been produced incorporating the new World Health Organization growth standards based on healthy breastfed infants. This paper describes the process by which the charts and evidence-based instructions were designed and evaluated, and what it revealed about professional understanding of charts and growth monitoring. A multidisciplinary expert group drew on existing literature, new data analyses and parent focus groups as well as two series of chart-plotting workshops for health staff. The first series explored possible design features and general chart understanding. The second evaluated an advanced prototype with instructions, using plotting and interpretation of three separate scenarios on the old charts, compared with the new charts. The first plotting workshops (46 participants) allowed decisions to be made about the exact chart format, but it also revealed widespread confusion about use of adjustment for gestation and the plotting of birthweight. In the second series (78 participants), high levels of plotting inaccuracy were identified on both chart formats, with 64% of respondents making at least one major mistake. Significant neonatal weight loss was poorly recognized. While most participants recognized abnormal and normal growth patterns, 13-20% did not. Many respondents had never received any formal training in chart use. Growth charts are complex clinical tools that are, at present, poorly understood and inconsistently used. The importance of clear guidelines and formal training has now been recognized and translated into supporting educational materials (free to download at http://www.growthcharts.rcpch.ac.uk). © 2011 Blackwell Publishing Ltd.

  11. Ewmareg control chart applied in the monitoring of industrial processes

    Directory of Open Access Journals (Sweden)

    Danilo Cuzzuol Pedrini

    2011-12-01

    Full Text Available If the process quality characteristics are dependent of control variables, and these vary during the process operation, the basic assumptions of control charts are violated. If the values of the control variables are known, it’s possible to apply the regression control chart. One of the most recent works in this area is the EWMAREG chart, which is the monitoring of the standardized residuals using exponentially weighted moving average control chart. In this paper, we present a systematic application of the EWMAREG control chart in monitoring a simulated process of chemical industry. The process characteristic monitored was the corrosion rate of steel pipe in function of four process control variables. The tool applied demonstrated high potential to detect change in surveillance of corrosion rate, ensuring stability process.

  12. The EWMA control chart based on robust scale estimators

    Directory of Open Access Journals (Sweden)

    Nadia Saeed

    2016-12-01

    Full Text Available The exponentially weighted moving average (EWMA chart is very popular in statistical process control for detecting the small shifts in process mean and variance. This chart performs well under the assumption of normality but when data violate the assumption of normality, the robust approaches needed. We have developed the EWMA charts under different robust scale estimators available in literature and also compared the performance of these charts by calculating expected out-of-control points and expected widths under non-symmetric distributions (i.e. gamma and exponential. The simulation studies are being carried out for the purpose and results showed that amongst six robust estimators, the chart based on estimator Q_n relatively performed well for non-normal processes in terms of its shorter expected width and more number of expected out-of-control points which shows its sensitivity to detect the out of control signal.

  13. Charting a New Path: Modernizing the U.S. Air Force Fighter Pilots Career Development

    Science.gov (United States)

    2015-12-01

    AU/ACSC/2015 AIR COMMAND AND STAFF COLLEGE AIR UNIVERSITY CHARTING A NEW PATH: MODERNIZING THE U.S. AIR FORCE FIGHTER PILOT’S CAREER...the shoulders of its fighter pilots and their capabilities in combat. However, any romantic visions of fighter pilot life fall in stark contrast...overcame the ambiguous WO relationship , the USAF did not care to understand how to utilize FO technical skills within its existing culture. A WO program

  14. The p-control chart: a tool for care improvement.

    Science.gov (United States)

    Duclos, Antoine; Voirin, Nicolas

    2010-10-01

    The p-chart is a user-friendly tool for monitoring adverse events. By converting data into knowledge, it is helpful in interpreting and reducing sources of variability in care. Certain basics for developing expertise to use p-charts correctly are necessary. This paper provides key elements on how to develop and interpret a p-chart for clinical practice, how to successfully integrate this tool within a comprehensive approach, and how to report a study based on p-chart utilization. P-chart building The p-chart combines time series analysis with a graphical presentation of data by plotting successive indicator measurements in chronological order. The pragmatic choice of well-defined indicators to be monitored is essential. Exact control limits based on the binomial distribution and the incorporation of risk adjustment represent important contributions for further improving the tool's performance in health-care settings. P-chart implementation The solution needed to reduce adverse events is not available from measurement alone. The success of routine introduction of the p-chart requires investigation of the causes of indicator variations and the trying out of quality improvement initiatives. It must be supported by strong management leadership within an atmosphere of constructive evaluation. Perspectives The implementation of the p-chart into clinical practice encourages practitioners to continuously undertake a critical examination of the care delivered. Nearly a century after it was created in the manufacturing industry, the control chart now contributes to improving the quality of health-care processes and patient safety.

  15. End-to-End Verification of Information-Flow Security for C and Assembly Programs

    Science.gov (United States)

    2016-04-01

    of children any process is allowed to spawn. Suppose a process with ID i and c children (c < mc) spawns a new child. Then the child’s ID will always...written in assembly; we verify all of the code, regardless of language. Categories and Subject Descriptors D.2.4 [Software En- gineering]: Software... allowed to flow between various domains? If we express the policy in terms of the high-level syscall specifications, then what will this imply for the

  16. Government Style as a Factor in Information Flow: Television Programming in Argentina, l979-l988.

    Science.gov (United States)

    John, Jeffrey Alan

    Noting that Argentina's recent history is particularly useful for analysis of the varying effects that differing government styles can have on a single mass communication system, a study compared Argentine (specifically Buenos Aires) television's 1979 programming schedule, prepared during a military dictatorship, with recent schedules prepared…

  17. Klamath Basin Restoration Agreement Off-Project Water Program Sub-basin Analysis Flow Statistics

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Hydrological Information Products for the Off-Project Water Program of the Klamath Basin Restoration Agreement U.S. Geological Survey Open-File Report 2012-1199 U.S....

  18. HydroHillChart – Pelton module. Software used to Calculate the Hill Chart of the Pelton Hydraulic Turbines

    Directory of Open Access Journals (Sweden)

    Dorian Nedelcu

    2015-07-01

    Full Text Available The paper presents the HydroHillChart - Pelton module application, used to calculate the hill chart of the Pelton hydraulic turbine models, by processing the data measured on the stand. In addition, the tools offered by the application such as: interface, menu, input data, numerical and graphical results, etc. are described.

  19. A computer program for two-dimensional and axisymmetric nonreacting perfect gas and equilibrium chemically reacting laminar, transitional and-or turbulent boundary layer flows

    Science.gov (United States)

    Miner, E. W.; Anderson, E. C.; Lewis, C. H.

    1971-01-01

    A computer program is described in detail for laminar, transitional, and/or turbulent boundary-layer flows of non-reacting (perfect gas) and reacting gas mixtures in chemical equilibrium. An implicit finite difference scheme was developed for both two dimensional and axisymmetric flows over bodies, and in rocket nozzles and hypervelocity wind tunnel nozzles. The program, program subroutines, variables, and input and output data are described. Also included is the output from a sample calculation of fully developed turbulent, perfect gas flow over a flat plate. Input data coding forms and a FORTRAN source listing of the program are included. A method is discussed for obtaining thermodynamic and transport property data which are required to perform boundary-layer calculations for reacting gases in chemical equilibrium.

  20. Synthetic-type control charts for time-between-events monitoring.

    Directory of Open Access Journals (Sweden)

    Fang Yen Yen

    Full Text Available This paper proposes three synthetic-type control charts to monitor the mean time-between-events of a homogenous Poisson process. The first proposed chart combines an Erlang (cumulative time between events, Tr chart and a conforming run length (CRL chart, denoted as Synth-Tr chart. The second proposed chart combines an exponential (or T chart and a group conforming run length (GCRL chart, denoted as GR-T chart. The third proposed chart combines an Erlang chart and a GCRL chart, denoted as GR-Tr chart. By using a Markov chain approach, the zero- and steady-state average number of observations to signal (ANOS of the proposed charts are obtained, in order to evaluate the performance of the three charts. The optimal design of the proposed charts is shown in this paper. The proposed charts are superior to the existing T chart, Tr chart, and Synth-T chart. As compared to the EWMA-T chart, the GR-T chart performs better in detecting large shifts, in terms of the zero- and steady-state performances. The zero-state Synth-T4 and GR-Tr (r = 3 or 4 charts outperform the EWMA-T chart for all shifts, whereas the Synth-Tr (r = 2 or 3 and GR-T 2 charts perform better for moderate to large shifts. For the steady-state process, the Synth-Tr and GR-Tr charts are more efficient than the EWMA-T chart in detecting small to moderate shifts.

  1. Synthetic-Type Control Charts for Time-Between-Events Monitoring

    Science.gov (United States)

    Yen, Fang Yen; Chong, Khoo Michael Boon; Ha, Lee Ming

    2013-01-01

    This paper proposes three synthetic-type control charts to monitor the mean time-between-events of a homogenous Poisson process. The first proposed chart combines an Erlang (cumulative time between events, Tr) chart and a conforming run length (CRL) chart, denoted as Synth-Tr chart. The second proposed chart combines an exponential (or T) chart and a group conforming run length (GCRL) chart, denoted as GR-T chart. The third proposed chart combines an Erlang chart and a GCRL chart, denoted as GR-Tr chart. By using a Markov chain approach, the zero- and steady-state average number of observations to signal (ANOS) of the proposed charts are obtained, in order to evaluate the performance of the three charts. The optimal design of the proposed charts is shown in this paper. The proposed charts are superior to the existing T chart, Tr chart, and Synth-T chart. As compared to the EWMA-T chart, the GR-T chart performs better in detecting large shifts, in terms of the zero- and steady-state performances. The zero-state Synth-T4 and GR-Tr (r = 3 or 4) charts outperform the EWMA-T chart for all shifts, whereas the Synth-Tr (r = 2 or 3) and GR-T2 charts perform better for moderate to large shifts. For the steady-state process, the Synth-Tr and GR-Tr charts are more efficient than the EWMA-T chart in detecting small to moderate shifts. PMID:23755231

  2. A Computer Program to Calculate the Supersonic Flow over a Solid Cone in Air or Water.

    Science.gov (United States)

    1984-06-01

    Pascals or about 11.1 Rilo- tars. lypical values for p, , the upstream pressure, are on the cider cf 1 tc pextaps a few tens of bars. Thus, it can be...PostGraduate School, the tolicwirG StE S sust le acccmplished iL the cider given: (1) The program must he compiled using the comianc: FCRTHX CCNEILOW This

  3. Target finding with a spatially aware handheld chart display.

    Science.gov (United States)

    Ware, Colin; Arsenault, Roland

    2012-12-01

    The objective was to evaluate the use of a spatially aware handheld chart display in a comparison with a track-up fixed display configuration and to investigate how cognitive strategies vary when performing the task of matching chart symbols with environmental features under different display geometries and task constraints. Small-screen devices containing both accelerometers and magnetometers support the development of spatially aware handheld maps.These can be designed so that symbols representing targets in the external world appear in a perspective view determined by the orientation of the device. A panoramic display was used to simulate a marine environment. The task involved matching targets in the scene to symbols on simulated chart displays. In Experiment I, a spatially aware handheld chart display was compared to a fixed track-up chart display. In Experiment 2, a gaze monitoring system was added and the distance between the chart display and the scene viewpoint was varied. All respondents were faster with the handheld device. Novices were much more accurate with the handheld device. People allocated their gaze very differently if they had to move between a map display and a view of the environment. There may be important benefits to spatially aware handheld displays in reducing errors relating to common navigation tasks. Both the difficulty of spatial transformations and the allocation of attention should be considered in the design of chart displays.

  4. A comparison of methods for construction of fetal reference charts.

    Science.gov (United States)

    Nevo, Daniel; Mandel, Micha; Ein-Mor, Eliana; Shen, Ori; Ben Chetrit, Avraham; Daniel-Spiegel, Etty; Yagel, Simcha

    2016-03-30

    Reference charts for fetal measures are used for early detection of pregnancies that should be monitored closely. Construction of reference charts corresponds to estimation of quantiles of a distribution as a function of gestational age. Existing methods have been developed under various modeling assumptions, typically by fitting a polynomial regression to certain functionals of the distributions (e.g., mean, standard deviation, and quantiles). We use a large dataset to compare various existing methods for construction of reference charts. We also relax the assumptions of a parametric polynomial link between the distribution parameters and age and consider cubic splines and discretization of age in order to compare charts based on more flexible and simpler models, respectively. We compare the different methods using various tools and demonstrate the importance of considering performance measures calculated from age-stratified data. We also examine the question of sample size. We compare our charts to similar charts that have been recently published and emphasize that the source of an apparent heterogeneity should be investigated. We conclude that the choice of which method to use for construction of reference charts should take the following into account: available sample size, validity of normality assumption, and results of various performance measures. Copyright © 2015 John Wiley & Sons, Ltd.

  5. An Assessment of Statistical Process Control-Based Approaches for Charting Student Evaluation Scores

    Science.gov (United States)

    Ding, Xin; Wardell, Don; Verma, Rohit

    2006-01-01

    We compare three control charts for monitoring data from student evaluations of teaching (SET) with the goal of improving student satisfaction with teaching performance. The two charts that we propose are a modified "p" chart and a z-score chart. We show that these charts overcome some of the shortcomings of the more traditional charts…

  6. [Growth charts: Impact on the prevalence of nutritional disorders].

    Science.gov (United States)

    Polo Martín, P; Abellan, J J; Nájar Godoy, M I; Álvarez de Laviada Mulero, T

    2015-05-01

    The references used to assess child growth in Spain are the graphs of the Orbegozo Foundation and the charts of the World Health Organization (WHO). The objective of this study is to analyze the differences between the two charts for weight, height and body mass index, and assess their relevance to identify growth or nutritional problems. The values of the extreme percentiles of height, weight and body mass index for each sex from 0 to 10 years in both charts are compared. For each value Absolute differences and Z scores are calculated for each value. To evaluate the impact on the prevalence of the various nutritional or growth disorders the location of the value of the respective percentiles of in each of the charts were assessed. Significant differences were observed between the 3th percentile of height and weight, 97th of weight, and 85th and 97th of body mass index. Marked differences were observed for the extreme values of body mass index. During the first years, the Orbegozo charts overestimate the prevalence of malnutrition (between 2% and 19% depending on age and sex) compared to the WHO charts. In subsequent ages Orbegozo underestimates WHO between 0.7% and 2.89%. Orbegozo underestimates the prevalence of overweight (between 2.5% and 14.8%) compared to the WHO charts. The 97th percentile of Body mass index in the Orbegozo charts corresponds in most cases with WHO percentiles above 99.99%. The two charts analyzed have significant differences from a clinical and the public health point of view, in the estimation of overweight/obesity and malnutrition. Copyright © 2014 Asociación Española de Pediatría. Published by Elsevier España, S.L.U. All rights reserved.

  7. Tactile acuity charts: a reliable measure of spatial acuity.

    Directory of Open Access Journals (Sweden)

    Patrick Bruns

    Full Text Available For assessing tactile spatial resolution it has recently been recommended to use tactile acuity charts which follow the design principles of the Snellen letter charts for visual acuity and involve active touch. However, it is currently unknown whether acuity thresholds obtained with this newly developed psychophysical procedure are in accordance with established measures of tactile acuity that involve passive contact with fixed duration and control of contact force. Here we directly compared tactile acuity thresholds obtained with the acuity charts to traditional two-point and grating orientation thresholds in a group of young healthy adults. For this purpose, two types of charts, using either Braille-like dot patterns or embossed Landolt rings with different orientations, were adapted from previous studies. Measurements with the two types of charts were equivalent, but generally more reliable with the dot pattern chart. A comparison with the two-point and grating orientation task data showed that the test-retest reliability of the acuity chart measurements after one week was superior to that of the passive methods. Individual thresholds obtained with the acuity charts agreed reasonably with the grating orientation threshold, but less so with the two-point threshold that yielded relatively distinct acuity estimates compared to the other methods. This potentially considerable amount of mismatch between different measures of tactile acuity suggests that tactile spatial resolution is a complex entity that should ideally be measured with different methods in parallel. The simple test procedure and high reliability of the acuity charts makes them a promising complement and alternative to the traditional two-point and grating orientation thresholds.

  8. Repeatability and Agreement of Visual Acuity Using the ETDRS Number Chart, Landolt C Chart, or ETDRS Alphabet Chart in Eyes With or Without Sight-Threatening Diseases.

    Science.gov (United States)

    Chaikitmongkol, Voraporn; Nanegrungsunk, Onnisa; Patikulsila, Direk; Ruamviboonsuk, Paisan; Bressler, Neil M

    2018-01-18

    The Early Treatment Diabetic Retinopathy Study (ETDRS) alphabet chart is not feasible for measuring best-corrected visual acuity (BCVA) for individuals who are unfamiliar with the Roman alphabet. The ETDRS Landolt C chart is an alternative, but it may not reflect true BCVA among those with confusion between left and right. The ETDRS number chart might overcome these limitations, but little is known regarding its reliability. To evaluate repeatability and agreement of BCVA using the ETDRS number chart or Landolt C chart compared with ETDRS alphabet charts in healthy and diseased eyes. A cross-sectional study was conducted in Thailand from July 1, 2015, to June 30, 2016, among 154 adult Thai individuals. Those who could read Roman alphabets were classified into the following 4 groups, using 1 eye per participant: group A, which comprised 60 healthy eyes (BCVA, 20/20-20/25); group B, which comprised 40 eyes with age-related cataract, diabetic macular edema, or age-related macular degeneration (BCVA, 20/20-20/40); group C, which comprised 40 eyes with age-related cataract, diabetic macular edema, or age-related macular degeneration (BCVA, 20/50-20/100); and group D, which comprised 14 eyes with age-related cataract, diabetic macular edema, or age-related macular degeneration (BCVA, 20/125-20/200). Two standardized 4-m BCVA measurements with 3 different Precision Vision ETDRS charts (PV number, Landolt C, and alphabet), in random sequence, performed 30 minutes apart. Repeatability, agreement, and testing duration of BCVA. Of 154 Thai participants (82 women and 72 men; mean [SD] age, 52.9 [18.2] years), the ETDRS number chart had strong repeatability coefficients (group A, 0.61 [95% CI, 0.42-0.75]; group B, 0.87 [95% CI, 0.78-0.93]; group C, 0.81 [95% CI, 0.67-0.90]; and group D, 0.81 [95% CI, 0.49-0.94]). Concordance correlation coefficients between the number and alphabet charts were also strong (group A, 0.89 [95% CI, 0.82-0.93]; group B, 0.97 [95% CI, 0

  9. Risk-Adjusted Control Charts for Health Care Monitoring

    Directory of Open Access Journals (Sweden)

    Willem Albers

    2011-01-01

    the distribution involved is negative binomial. However, in health care monitoring, (groups of patients will often belong to different risk categories. In the present paper, we will show how information about category membership can be used to adjust the basic negative binomial charts to the actual risk incurred. Attention is also devoted to comparing such conditional charts to their unconditional counterparts. The latter do take possible heterogeneity into account but refrain from risk-adjustment. Note that in the risk adjusted case several parameters are involved, which will all be typically unknown. Hence, the potentially considerable estimation effects of the new charts will be investigated as well.

  10. Computer Programs for Calculating Partially Cavitating Blunt Trailing Edged Cascade Flows in Nonlinear Theory.

    Science.gov (United States)

    1980-01-01

    thickness of the foil which was used for the plano -convex foil case in the previous project [1] is now a dummy input in these programs. 8 3.1 INPUT DATA...the plano -convex foil (dummy variable). XXDD End of the normalized foil =1. YYDD Y coordinate of upper end of the normalized foil. 16 R Specifies the...6)’CAVLEN’( 1.-UU22).C1.-CAVLEN) 00 25 LG:1,LPM CI~NO CPC?.SIP) NEXT* FOR THE FIRST wETTE3 ARC PORTION Sl-- CP IS BASED ON Ul AND Pie 140 LP:1 IS

  11. Regulation of Dynamical Systems to Optimal Solutions of Semidefinite Programs: Algorithms and Applications to AC Optimal Power Flow

    Energy Technology Data Exchange (ETDEWEB)

    Dall' Anese, Emiliano; Dhople, Sairaj V.; Giannakis, Georgios B.

    2015-07-01

    This paper considers a collection of networked nonlinear dynamical systems, and addresses the synthesis of feedback controllers that seek optimal operating points corresponding to the solution of pertinent network-wide optimization problems. Particular emphasis is placed on the solution of semidefinite programs (SDPs). The design of the feedback controller is grounded on a dual e-subgradient approach, with the dual iterates utilized to dynamically update the dynamical-system reference signals. Global convergence is guaranteed for diminishing stepsize rules, even when the reference inputs are updated at a faster rate than the dynamical-system settling time. The application of the proposed framework to the control of power-electronic inverters in AC distribution systems is discussed. The objective is to bridge the time-scale separation between real-time inverter control and network-wide optimization. Optimization objectives assume the form of SDP relaxations of prototypical AC optimal power flow problems.

  12. Towards agile large-scale predictive modelling in drug discovery with flow-based programming design principles.

    Science.gov (United States)

    Lampa, Samuel; Alvarsson, Jonathan; Spjuth, Ola

    2016-01-01

    Predictive modelling in drug discovery is challenging to automate as it often contains multiple analysis steps and might involve cross-validation and parameter tuning that create complex dependencies between tasks. With large-scale data or when using computationally demanding modelling methods, e-infrastructures such as high-performance or cloud computing are required, adding to the existing challenges of fault-tolerant automation. Workflow management systems can aid in many of these challenges, but the currently available systems are lacking in the functionality needed to enable agile and flexible predictive modelling. We here present an approach inspired by elements of the flow-based programming paradigm, implemented as an extension of the Luigi system which we name SciLuigi. We also discuss the experiences from using the approach when modelling a large set of biochemical interactions using a shared computer cluster.Graphical abstract.

  13. Environmental Assessment of the Hawaii Geothermal Project Well Flow Test Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-11-01

    The Hawaii Geothermal Project, a coordinated research effort of the University of Hawaii, funded by the County and State of Hawaii, and ERDA, was initiated in 1973 in an effort to identify, generate, and use geothermal energy on the Big Island of Hawaii. A number of stages are involved in developing geothermal power resources: exploration, test drilling, production testing, field development, power plant and powerline construction, and full-scale production. Phase I of the Project, which began in the summer of 1973, involved conducting exploratory surveys, developing analytical models for interpretation of geophysical results, conducting studies on energy recovery from hot brine, and examining the legal and economic implications of developing geothermal resources in the state. Phase II of the Project, initiated in the summer of 1975, centers on drilling an exploratory research well on the Island of Hawaii, but also continues operational support for the geophysical, engineering, and socioeconomic activities delineated above. The project to date is between the test drilling and production testing phase. The purpose of this assessment is to describe the activities and potential impacts associated with extensive well flow testing to be completed during Phase II.

  14. TRUST: A Computer Program for Variably Saturated Flow in Multidimensional, Deformable Media

    Energy Technology Data Exchange (ETDEWEB)

    Reisenauer, A. E.; Key, K. T.; Narasimhan, T. N.; Nelson, R. W.

    1982-01-01

    The computer code, TRUST. provides a versatile tool to solve a wide spectrum of fluid flow problems arising in variably saturated deformable porous media. The governing equations express the conservation of fluid mass in an elemental volume that has a constant volume of solid. Deformation of the skeleton may be nonelastic. Permeability and compressibility coefficients may be nonlinearly related to effective stress. Relationships between permeability and saturation with pore water pressure in the unsaturated zone may include hysteresis. The code developed by T. N. Narasimhan grew out of the original TRUNP code written by A. L. Edwards. The code uses an integrated finite difference algorithm for numerically solving the governing equation. Narching in time is performed by a mixed explicit-implicit numerical procedure in which the time step is internally controlled. The time step control and related feature in the TRUST code provide an effective control of the potential numerical instabilities that can arise in the course of solving this difficult class of nonlinear boundary value problem. This document brings together the equations, theory, and users manual for the code as well as a sample case with input and output.

  15. Documentation of a groundwater flow model (SJRRPGW) for the San Joaquin River Restoration Program study area, California

    Science.gov (United States)

    Traum, Jonathan A.; Phillips, Steven P.; Bennett, George Luther; Zamora, Celia; Metzger, Loren F.

    2014-01-01

    To better understand the potential effects of restoration flows on existing drainage problems, anticipated as a result of the San Joaquin River Restoration Program (SJRRP), the U.S. Geological Survey (USGS), in cooperation with the U.S. Bureau of Reclamation (Reclamation), developed a groundwater flow model (SJRRPGW) of the SJRRP study area that is within 5 miles of the San Joaquin River and adjacent bypass system from Friant Dam to the Merced River. The primary goal of the SJRRP is to reestablish the natural ecology of the river to a degree that restores salmon and other fish populations. Increased flows in the river, particularly during the spring salmon run, are a key component of the restoration effort. A potential consequence of these increased river flows is the exacerbation of existing irrigation drainage problems along a section of the river between Mendota and the confluence with the Merced River. Historically, this reach typically was underlain by a water table within 10 feet of the land surface, thus requiring careful irrigation management and (or) artificial drainage to maintain crop health. The SJRRPGW is designed to meet the short-term needs of the SJRRP; future versions of the model may incorporate potential enhancements, several of which are identified in this report. The SJRRPGW was constructed using the USGS groundwater flow model MODFLOW and was built on the framework of the USGS Central Valley Hydrologic Model (CVHM) within which the SJRRPGW model domain is embedded. The Farm Process (FMP2) was used to simulate the supply and demand components of irrigated agriculture. The Streamflow-Routing Package (SFR2) was used to simulate the streams and bypasses and their interaction with the aquifer system. The 1,300-square mile study area was subdivided into 0.25-mile by 0.25-mile cells. The sediment texture of the aquifer system, which was used to distribute hydraulic properties by model cell, was refined from that used in the CVHM to better represent

  16. Time geography: a model for psychiatric life charting?

    Science.gov (United States)

    Sunnqvist, C; Persson, U; Lenntorp, B; Träskman-Bendz, L

    2007-05-01

    Since many years, life charting has been used to describe the life course and life events of psychiatric patients. The aim of the present study was to describe and evaluate time geographic life charts of 11 former psychiatric patients in order to promote systematic descriptions of their life events over time. Information on all events which was gathered from the life charts was analysed by manifest content analysis and reduced to four categories: information received by asking only about moves, social capacity, predisposing life events and/or stressful as well as precipitating life events. Our findings showed that this kind of life charts offered a comprehensive and structured picture. They describe a detailed life situation from one time period to another, where geographical sites serve as anchors. The patients expressed satisfaction with this method of combining an interview with a time geographic life line.

  17. Monitoring obstetricians performance with statistical process control charts

    National Research Council Canada - National Science Library

    Lane; Weeks; Scholefield; Alfirevic

    2007-01-01

    ... As a `proof of principle', we have used statistical process control (SPC) charts to compare the observed complication rates for amniocentesis and ventouse delivery with the expected complication rates based on published data...

  18. The new numbers contrast sensitivity chart for contrast sensitivity measurement

    Directory of Open Access Journals (Sweden)

    Bharkbhum Khambhiphant

    2011-10-01

    Conclusions: These charts show reasonable agreement and can be used interchangeably with the MARS. It is helpful for Thai people who can only read numbers in doing the test. We can use them in routinely contrast sensitivity measurement.

  19. Grand Canyon VFR Chart - Aeronautical Information Services Digital Products

    Data.gov (United States)

    Department of Transportation — The Federal Aviation Administration (FAA) digital-Visual Chart series is designed to meet the needs of users who require georeferenced raster images of a FAA Visual...

  20. System Behaviour Charts Inform an Understanding of Biodiversity Recovery

    Directory of Open Access Journals (Sweden)

    Simon A. Black

    2015-01-01

    Full Text Available Practitioners working with species and ecosystem recovery typically deal with the complexity of, on one hand, lack of data or data uncertainties and, on the other hand, demand for critical decision-making and intervention. The control chart methods of commercial and industrial and environmental monitoring can complement an ecological understanding of wildlife systems including those situations which incorporate human activities and land use. Systems Behaviour Charts are based upon well-established control chart methods to provide conservation managers with an approach to using existing data and enable insight to aid timely planning of conservation interventions and also complement and stimulate research into wider scientific and ecological questions. When the approach is applied to existing data sets in well-known wildlife conservation cases, the subsequent Systems Behaviour Charts and associated analytical criteria demonstrate insights which would be helpful in averting problems associated with each case example.

  1. Another Look at the EWMA Control Chart with Estimated Parameters

    NARCIS (Netherlands)

    Saleh, N.A.; Mahmoud, M.A.; Jones-Farmer, L.A.; Zwetsloot, I.; Woodall, W.H.

    2015-01-01

    The authors assess the in-control performance of the exponentially weighted moving average (EWMA) control chart in terms of the SDARL and percentiles of the ARL distribution when the process parameters are estimated.

  2. Gulf of Mexico IFR Aeronautical Chart Index - Aeronautical Information Services Digital Products

    Data.gov (United States)

    Department of Transportation — The IFR Enroute Aeronautical Chart series is designed to meet the needs of users who require a digital version chart. This is the visual index to the charts for the...

  3. 49 CFR 236.338 - Mechanical locking required in accordance with locking sheet and dog chart.

    Science.gov (United States)

    2010-10-01

    ... locking sheet and dog chart. 236.338 Section 236.338 Transportation Other Regulations Relating to... in accordance with locking sheet and dog chart. Mechanical locking shall be in accordance with locking sheet and dog chart currently in effect. ...

  4. An Excel Add-In for Statistical Process Control Charts

    OpenAIRE

    Buttrey, Samuel E.

    2009-01-01

    Statistical process control (SPC) descibes a widely-used set of approaches used to de- tect shifts in processes in, for example, manufacturing. Among these are \\control charts". Control charts and other SPC techniques have been in use since at least the 1950s, and, because they are comparatively unsophisticated, are often used by management or op- erations personnel without formal statistical training. These personnel will often have experience with the popular spreadsheet prog...

  5. Schedule performance measurement based on statistical process control charts

    OpenAIRE

    Oleghe, Omogbai; Salonitis, Konstantinos

    2014-01-01

    In a job-shop manufacturing environment, achieving a schedule that is on target is difficult due to the dynamism of factors affecting the system, and this makes schedule performance measurement systems hard to design and implement. In the present paper, Statistical Process Control charts are directly applied to a scheduling process for the purpose of objectively measuring schedule performance. SPC charts provide an objective and timely approach to designing, implementing and mo...

  6. Bivariate copulas on the exponentially weighted moving average control chart

    Directory of Open Access Journals (Sweden)

    Sasigarn Kuvattana

    2016-10-01

    Full Text Available This paper proposes four types of copulas on the Exponentially Weighted Moving Average (EWMA control chart when observations are from an exponential distribution using a Monte Carlo simulation approach. The performance of the control chart is based on the Average Run Length (ARL which is compared for each copula. Copula functions for specifying dependence between random variables are used and measured by Kendall’s tau. The results show that the Normal copula can be used for almost all shifts.

  7. CREATING AND AUDITING A NEW ELECTRONIC CONTINUOUS INFUSION PRESCRIPTION CHART FOR A PAEDIATRIC CRITICAL CARE UNIT.

    Science.gov (United States)

    Siu, Emily; Sadasivam, Kalaimaran; Christiansen, Nanna

    2016-09-01

    Prescription errors, including continuous infusion prescriptions are one major source of concern in the paediatric population. Evidence suggests that use of an electronic or web-based calculator could minimise these errors. In our paediatric critical care unit (PCCU) we have created an electronic continuous infusion prescription chart to target errors in this area and conducted an audit to assess its effect on error reduction. To create an electronic continuous infusion prescription chart and audit its effect on prescription errors. Similar electronic continuous infusion prescription charts were evaluated. A Choice of electronic formats were considered and excel was chosen for its simplicity and flexibility. The choice of medications to be included, dilution method, and dosage range was agreed between PCCU consultant, pharmacy and nursing staff. Formulas for calculating each medication infusion was created and validated for different age and weight ranges by at least 2 PCCU trained pharmacists, accounting for capping at certain age and weight bands as appropriate for the medication. These were programmed into the spreadsheet for automatic calculation using inputted age and weight for the selected medications. Continuous infusion prescriptions were audited 6 months before and after implementation in April 2015 of this electronic chart. Parameters audited include medication dose, infusion rate, concentration, route, legibility, and missing or incorrect patient details. A trial period of 4 weeks preceded implementation. The electronic continuous infusion prescription form was created and used on PCCU. Hand written prescriptions had higher error rate (30.7%) as compared to electronic charts (0.7%) with a p-value errors were found in electronic prescriptions in regards to dose, volume and rate calculation. The use of an electronic continuous infusion prescription chart has been successfully set up and used on PCCU. Its use has significantly reduced continuous infusion

  8. Mainstreaming women, equating men: Charting an inclusionary ...

    African Journals Online (AJOL)

    Following the African Union's declaration of 2010-2020 as the African Decade for Women, some critical questions engage the dominant ideas of gender equality and mainstreaming in the continent's ongoing development initiatives. Should men be integrated into development programming and policies relating to women?

  9. Research program to develop and validate conceptual models for flow and transport through unsaturated, fractured rock; Yucca Mountain Site Characterization Project

    Energy Technology Data Exchange (ETDEWEB)

    Glass, R.J.; Tidwell, V.C.

    1991-09-01

    As part of the Yucca Mountain Project, our research program to develop and validate conceptual models for flow and transport through unsaturated fractured rock integrates fundamental physical experimentation with conceptual model formulation and mathematical modeling. Our research is directed toward developing and validating macroscopic, continuum-based models and supporting effective property models because of their widespread utility within the context of this project. Success relative to the development and validation of effective property models is predicted on a firm understanding of the basic physics governing flow through fractured media, specifically in the areas of unsaturated flow and transport in a single fracture and fracture-matrix interaction.

  10. Simulation model for wind energy storage systems. Volume III. Program descriptions. [SIMWEST CODE

    Energy Technology Data Exchange (ETDEWEB)

    Warren, A.W.; Edsinger, R.W.; Burroughs, J.D.

    1977-08-01

    The effort developed a comprehensive computer program for the modeling of wind energy/storage systems utilizing any combination of five types of storage (pumped hydro, battery, thermal, flywheel and pneumatic). An acronym for the program is SIMWEST (Simulation Model for Wind Energy Storage). The level of detail of SIMWEST is consistent with a role of evaluating the economic feasibility as well as the general performance of wind energy systems. The software package consists of two basic programs and a library of system, environmental, and load components. Volume III, the SIMWEST program description contains program descriptions, flow charts and program listings for the SIMWEST Model Generation Program, the Simulation program, the File Maintenance program and the Printer Plotter program. Volume III generally would not be required by SIMWEST user.

  11. North Atlantic IFR Route Planning Chart GEO-TIFF - Aeronautical Information Services Digital Products

    Data.gov (United States)

    Department of Transportation — North Atlantic Route Chart is designed for FAA Controllers to monitor transatlantic flights, this 5-color chart shows oceanic control areas, coastal navigation aids,...

  12. North Atlantic IFR Route Planning Chart PDF File - Aeronautical Information Services Digital Products

    Data.gov (United States)

    Department of Transportation — North Atlantic Route Chart is designed for FAA Controllers to monitor transatlantic flights, this 5-color chart shows oceanic control areas, coastal navigation aids,...

  13. A Combined Control Chart for Identifying Out–Of–Control Points in Multivariate Processes

    OpenAIRE

    Marroquín–Prado E.; Cantú–Sifuentes M.

    2010-01-01

    The Hotelling's T2 control chart is widely used to identify out–of–control signals in multivariate processes. However, this chart is not sensitive to small shifts in the process mean vec tor. In this work we propose a control chart to identify out–of–control signals. The proposed chart is a combination of Hotelling's T2 chart, M chart proposed by Hayter et al. (1994) and a new chart based on Principal Components. The combination of these charts identifies any type and size of change in the pr...

  14. Diagnostic value of run chart analysis: using likelihood ratios to compare run chart rules on simulated data series.

    Science.gov (United States)

    Anhøj, Jacob

    2015-01-01

    Run charts are widely used in healthcare improvement, but there is little consensus on how to interpret them. The primary aim of this study was to evaluate and compare the diagnostic properties of different sets of run chart rules. A run chart is a line graph of a quality measure over time. The main purpose of the run chart is to detect process improvement or process degradation, which will turn up as non-random patterns in the distribution of data points around the median. Non-random variation may be identified by simple statistical tests including the presence of unusually long runs of data points on one side of the median or if the graph crosses the median unusually few times. However, there is no general agreement on what defines "unusually long" or "unusually few". Other tests of questionable value are frequently used as well. Three sets of run chart rules (Anhoej, Perla, and Carey rules) have been published in peer reviewed healthcare journals, but these sets differ significantly in their sensitivity and specificity to non-random variation. In this study I investigate the diagnostic values expressed by likelihood ratios of three sets of run chart rules for detection of shifts in process performance using random data series. The study concludes that the Anhoej rules have good diagnostic properties and are superior to the Perla and the Carey rules.

  15. Breast cancer screening (BCS) chart: a basic and preliminary model for making screening mammography more productive and efficient.

    Science.gov (United States)

    Poorolajal, Jalal; Akbari, Mohammad Esmaeil; Ziaee, Fatane; Karami, Manoochehr; Ghoncheh, Mahshid

    2017-05-15

    The breast cancer screening (BCS) chart is suggested as a basic and preliminary tool to improve efficiency of screening mammography. We conducted this case-control study in 2016 and enrolled 1422 women aged 30-75 years, including 506 women with breast cancer (cases) and 916 women without breast cancer (controls). We developed the BCS chart using a multiple logistic regression analysis. We combined the risks of breast cancer to predict the individual risk of breast cancer. Then, we stratified and colored the predicted risk probabilities as follows: chart provides the risk probability of breast cancer, based on age, body mass index, late menopause, having a benign breast disease and a positive family history of breast cancer among the first-degree or the second/third-degree relatives. According to this chart, an individual can be classified in a category of low risk (green), medium risk (yellow and orange), high risk (red and brown) and very high risk (black) for breast cancer. This chart is a flexible and easy to use tool that can detect high-risk subjects and make the screening program more efficient and productive.

  16. A feasibility Study: The Succinct Solver v2.0, XSB Prolog v2.6, and Flow-Logic Based Program Analysis for Carmel

    DEFF Research Database (Denmark)

    Pilegaard, Henrik

    2003-01-01

    We perform a direct comparison of the {Succinct Solver v2.0} and {XSB Prolog v2.6} based on experiments with {Control Flow Analyses} of scalable {Discretionary Ambient programs} and {Carmel programs}. To facilitate this comparison we expand ALFP clauses accepted by the Succinct Solver into more...... of the Succinct Solver is at worst a small constant factor worse than XSB Prolog. In optimum cases the Succinct Solver outperforms XSB Prolog by having a substantially lower asymptotic complexity....

  17. Statistical process control charts for monitoring military injuries.

    Science.gov (United States)

    Schuh, Anna; Canham-Chervak, Michelle; Jones, Bruce H

    2017-12-01

    An essential aspect of an injury prevention process is surveillance, which quantifies and documents injury rates in populations of interest and enables monitoring of injury frequencies, rates and trends. To drive progress towards injury reduction goals, additional tools are needed. Statistical process control charts, a methodology that has not been previously applied to Army injury monitoring, capitalise on existing medical surveillance data to provide information to leadership about injury trends necessary for prevention planning and evaluation. Statistical process control Shewhart u-charts were created for 49 US Army installations using quarterly injury medical encounter rates, 2007-2015, for active duty soldiers obtained from the Defense Medical Surveillance System. Injuries were defined according to established military injury surveillance recommendations. Charts display control limits three standard deviations (SDs) above and below an installation-specific historical average rate determined using 28 data points, 2007-2013. Charts are available in Army strategic management dashboards. From 2007 to 2015, Army injury rates ranged from 1254 to 1494 unique injuries per 1000 person-years. Installation injury rates ranged from 610 to 2312 injuries per 1000 person-years. Control charts identified four installations with injury rates exceeding the upper control limits at least once during 2014-2015, rates at three installations exceeded the lower control limit at least once and 42 installations had rates that fluctuated around the historical mean. Control charts can be used to drive progress towards injury reduction goals by indicating statistically significant increases and decreases in injury rates. Future applications to military subpopulations, other health outcome metrics and chart enhancements are suggested. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  18. A Combined Control Chart for Identifying Out–Of–Control Points in Multivariate Processes

    Directory of Open Access Journals (Sweden)

    Marroquín–Prado E.

    2010-10-01

    Full Text Available The Hotelling's T2 control chart is widely used to identify out–of–control signals in multivariate processes. However, this chart is not sensitive to small shifts in the process mean vec tor. In this work we propose a control chart to identify out–of–control signals. The proposed chart is a combination of Hotelling's T2 chart, M chart proposed by Hayter et al. (1994 and a new chart based on Principal Components. The combination of these charts identifies any type and size of change in the process mean vector. Us ing simulation and the Average Run Length (ARL, the performance of the proposed control chart is evaluated. The ARL means the average points within control before an out–of–control point is detected, The results of the simulation show that the proposed chart is more sensitive that each one of the three charts individually

  19. Comparison of reading speed with 3 different log-scaled reading charts.

    Science.gov (United States)

    Buari, Noor Halilah; Chen, Ai-Hong; Musa, Nuraini

    2014-01-01

    A reading chart that resembles real reading conditions is important to evaluate the quality of life in terms of reading performance. The purpose of this study was to compare the reading speed of UiTM Malay related words (UiTM-Mrw) reading chart with MNread Acuity Chart and Colenbrander Reading Chart. Fifty subjects with normal sight were randomly recruited through randomized sampling in this study (mean age=22.98±1.65 years). Subjects were asked to read three different near charts aloud and as quickly as possible at random sequence. The charts were the UiTM-Mrw Reading Chart, MNread Acuity Chart and Colenbrander Reading Chart, respectively. The time taken to read each chart was recorded and any errors while reading were noted. Reading performance was quantified in terms of reading speed as words per minute (wpm). The mean reading speed for UiTM-Mrw Reading Chart, MNread Acuity Chart and Colenbrander Reading Chart was 200±30wpm, 196±28wpm and 194±31wpm, respectively. Comparison of reading speed between UiTM-Mrw Reading Chart and MNread Acuity Chart showed no significant difference (t=-0.73, p=0.72). The same happened with the reading speed between UiTM-Mrw Reading Chart and Colenbrander Reading Chart (t=-0.97, p=0.55). Bland and Altman plot showed good agreement between reading speed of UiTM-Mrw Reading Chart with MNread Acuity Chart with the Colenbrander Reading Chart. UiTM-Mrw Reading Chart in Malay language is highly comparable with standardized charts and can be used for evaluating reading speed. Copyright © 2013 Spanish General Council of Optometry. Published by Elsevier Espana. All rights reserved.

  20. Control charts for monitoring accumulating adverse event count frequencies from single and multiple blinded trials.

    Science.gov (United States)

    Gould, A Lawrence

    2016-12-30

    Conventional practice monitors accumulating information about drug safety in terms of the numbers of adverse events reported from trials in a drug development program. Estimates of between-treatment adverse event risk differences can be obtained readily from unblinded trials with adjustment for differences among trials using conventional statistical methods. Recent regulatory guidelines require monitoring the cumulative frequency of adverse event reports to identify possible between-treatment adverse event risk differences without unblinding ongoing trials. Conventional statistical methods for assessing between-treatment adverse event risks cannot be applied when the trials are blinded. However, CUSUM charts can be used to monitor the accumulation of adverse event occurrences. CUSUM charts for monitoring adverse event occurrence in a Bayesian paradigm are based on assumptions about the process generating the adverse event counts in a trial as expressed by informative prior distributions. This article describes the construction of control charts for monitoring adverse event occurrence based on statistical models for the processes, characterizes their statistical properties, and describes how to construct useful prior distributions. Application of the approach to two adverse events of interest in a real trial gave nearly identical results for binomial and Poisson observed event count likelihoods. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  1. Fuzzy x- and s Control Charts: A Data-Adaptability and Human-Acceptance Approach

    Directory of Open Access Journals (Sweden)

    Ming-Hung Shu

    2017-01-01

    Full Text Available For sequentially monitoring and controlling average and variability of an online manufacturing process, x¯ and s control charts are widely utilized tools, whose constructions require the data to be real (precise numbers. However, many quality characteristics in practice, such as surface roughness of optical lenses, have been long recorded as fuzzy data, in which the traditional x¯ and s charts have manifested some inaccessibility. Therefore, for well accommodating this fuzzy-data domain, this paper integrates fuzzy set theories to establish the fuzzy charts under a general variable-sample-size condition. First, the resolution-identity principle is exerted to erect the sample-statistics’ and control-limits’ fuzzy numbers (SSFNs and CLFNs, where the sample fuzzy data are unified and aggregated through statistical and nonlinear-programming manipulations. Then, the fuzzy-number ranking approach based on left and right integral index is brought to differentiate magnitude of fuzzy numbers and compare SSFNs and CLFNs pairwise. Thirdly, the fuzzy-logic alike reasoning is enacted to categorize process conditions with intermittent classifications between in control and out of control. Finally, a realistic example to control surface roughness on the turning process in producing optical lenses is illustrated to demonstrate their data-adaptability and human-acceptance of those integrated methodologies under fuzzy-data environments.

  2. LLUVIA-II: A program for two-dimensional, transient flow through partially saturated porous media; Yucca Mountain Site Characterization Project

    Energy Technology Data Exchange (ETDEWEB)

    Eaton, R.R.; Hopkins, P.L.

    1992-08-01

    LLUVIA-II is a program designed for the efficient solution of two- dimensional transient flow of liquid water through partially saturated, porous media. The code solves Richards equation using the method-of-lines procedure. This document describes the solution procedure employed, input data structure, output, and code verification.

  3. [Visual acuity measured via the Freiburg visual acuity test (FVT), Bailey Lovie chart and Landolt Ring chart].

    Science.gov (United States)

    Wesemann, Wolfgang

    2002-09-01

    If different ways for correcting refractive errors of the human eye have to be compared, accurate and reproducible measurement procedures are necessary. Binocular visual acuity of 130 students without pathologies was measured with the Freiburg Visual Acuity Test, the Bailey-Lovie chart and a Landolt ring chart (4 orientations). The reproducibility of the FVT was determined by repeated measurements. The average visual acuity was 1.93 +/- 0.03 (= 20/10.4) with the FVT, 1.82 +/- 0.03 (= 20/11) with the Landolt ring chart, and 1.48 +/- 0.02 (= 20/13.5) with the Bailey-Lovie chart. 50 % of all repeated measurements with the FVT were within an interval of +/- 0.035 logMAR from the mean value. 95 % were within +/- 0.1 logMAR. Results of earlier studies are discussed. On average, visual acuity values found with the Freiburg Visual Acuity Test were slightly larger as compared to the Landolt ring chart (difference = 0.025 logMAR). Taking the maximal difference of 0.05 logMAR tolerated by the international standard DIN EN ISO 8597 into account, both tests are equivalent. The results found with the Bailey-Lovie chart were substantially lower as compared to the Landolt ring chart (difference = 0.09 logMAR). The Freiburg Visual Acuity Test has a high reproducibility and measures visual acuity on a continuous scale that is not limited to the traditional visual acuity steps. Thus, it can be recommended as a reference procedure for comparative visual acuity studies.

  4. Developing charts of roof and stope support control

    Energy Technology Data Exchange (ETDEWEB)

    Churilov, A.A.; Kuzmenko, N.S.

    1982-01-01

    The ''methodology for determining the feed speed of narrow-action cutter-loaders relative to the speed of erecting individual supports in view of the geological engineering and physiological factors'' was developed by the Donetsk Coal Mining Institute. Using this methodology, the number of workers involved in support operations is determined depending on the plan orders with a specific chart of roof and support control. An inverse problem is also solved--determining the permissible load on a longwall in specific geological conditions, depending on the number of workers when they observe the requirements of the chart as well as the ergonomic and physiological requirements. The development and incorporation of roof and support control charts in accordance with the features noted makes it possible to create safe working conditions in stopes with individual supports and to increase their operational efficiency.

  5. HOTELLING'S T2 CONTROL CHARTS BASED ON ROBUST ESTIMATORS

    Directory of Open Access Journals (Sweden)

    SERGIO YÁÑEZ

    2010-01-01

    Full Text Available Under the presence of multivariate outliers, in a Phase I analysis of historical set of data, the T 2 control chart based on the usual sample mean vector and sample variance covariance matrix performs poorly. Several alternative estimators have been proposed. Among them, estimators based on the minimum volume ellipsoid (MVE and the minimum covariance determinant (MCD are powerful in detecting a reasonable number of outliers. In this paper we propose a T 2 control chart using the biweight S estimators for the location and dispersion parameters when monitoring multivariate individual observations. Simulation studies show that this method outperforms the T 2 control chart based on MVE estimators for a small number of observations.

  6. Economic design of a nonparametric EWMA control chart for location

    Directory of Open Access Journals (Sweden)

    Patil Subhash Hariba

    Full Text Available Abstract In this article, we have proposed an economic design of Exponentially Weighted Moving Average control chart based on sign statistic to control location parameter of the process. The economic performance of the chart is evaluated for different shifts in the location. It is observed that, as shift in the process location increases, sample size to detect the shift and the loss cost from the process decrease. The power of the chart increases with increasing shift. The design gives better economic/statistical performance for large shifts in the process. This economic procedure can be applied to any process having known or unknown process outcome distribution. The sensitivity of the design is also carried out to check the effect on statistical as well as economic performance of the design due to change in different time and cost parameters.

  7. Attribute Control Chart Construction Based on Fuzzy Score Number

    Directory of Open Access Journals (Sweden)

    Shiwang Hou

    2016-11-01

    Full Text Available There is much uncertainty and fuzziness in product quality attributes or quality parameters of a manufacturing process, so the traditional quality control chart can be difficult to apply. This paper proposes a fuzzy control chart. The plotted data was obtained by transforming expert scores into fuzzy numbers. Two types of nonconformity judgment rules—necessity and possibility measurement rules—are proposed. Through graphical analysis, the nonconformity judging method (i.e., assessing directly based on the shape feature of a fuzzy control chart is proposed. For four different widely used membership functions, control levels were analyzed and compared by observing gaps between the upper and lower control limits. The result of the case study validates the feasibility and reliability of the proposed approach.

  8. 48 CFR 252.245-7000 - Government-furnished mapping, charting, and geodesy property.

    Science.gov (United States)

    2010-10-01

    ... mapping, charting, and geodesy property. 252.245-7000 Section 252.245-7000 Federal Acquisition Regulations..., charting, and geodesy property. As prescribed in 245.107-70, use the following clause: Government-Furnished Mapping, Charting, and Geodesy Property (DEC 1991) (a) Definition—Mapping, charting, and geodesy (MC&G...

  9. Historical Map & Chart Collection of NOAA's Nautical Charts, Hydrographic Surveys, Topographic Surveys, Geodetic Surveys, City Plans, and Civil War Battle Maps Starting from the mid 1700's

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Historical Map and Chart Collection of the Office of Coast Survey contains over 20000 historical maps and charts from the mid 1700s through the late 1900s. These...

  10. Adherence to the Australian National Inpatient Medication Chart: the efficacy of a uniform national drug chart on improving prescription error.

    Science.gov (United States)

    Atik, Alp

    2013-10-01

    In 2006, the National Inpatient Medication Chart (NIMC) was introduced as a uniform medication chart in Australian public hospitals with the aim of reducing prescription error. The rate of regular medication prescription error in the NIMC was assessed. Data was collected using the NIMC Audit Tool and analyzed with respect to causes of error per medication prescription and per medication chart. The following prescription requirements were assessed: date, generic drug name, route of administration, dose, frequency, administration time, indication, signature, name and contact details. A total of 1877 medication prescriptions were reviewed. 1653 prescriptions (88.07%) had no contact number, 1630 (86.84%) did not have an indication, 1230 and 675 (35.96%) used a drug's trade name. Within 261 medication charts, all had at least one entry, which did not include an indication, 258 (98.85%) had at least one entry, which did not have a contact number and 200 (76.63%) had at least one entry, which used a trade name. The introduction of a uniform national medication chart is a positive step, but more needs to be done to address the root causes of prescription error. © 2012 John Wiley & Sons Ltd.

  11. Toward developing a standardized Arabic continuous text reading chart.

    Science.gov (United States)

    Alabdulkader, Balsam; Leat, Susan Jennifer

    Near visual acuity is an essential measurement during an oculo-visual assessment. Short duration continuous text reading charts measure reading acuity and other aspects of reading performance. There is no standardized version of such chart in Arabic. The aim of this study is to create sentences of equal readability to use in the development of a standardized Arabic continuous text reading chart. Initially, 109 Arabic pairs of sentences were created for use in constructing a chart with similar layout to the Colenbrander chart. They were created to have the same grade level of difficulty and physical length. Fifty-three adults and sixteen children were recruited to validate the sentences. Reading speed in correct words per minute (CWPM) and standard length words per minute (SLWPM) was measured and errors were counted. Criteria based on reading speed and errors made in each sentence pair were used to exclude sentence pairs with more outlying characteristics, and to select the final group of sentence pairs. Forty-five sentence pairs were selected according to the elimination criteria. For adults, the average reading speed for the final sentences was 166 CWPM and 187 SLWPM and the average number of errors per sentence pair was 0.21. Childrens' average reading speed for the final group of sentences was 61 CWPM and 72 SLWPM. Their average error rate was 1.71. The reliability analysis showed that the final 45 sentence pairs are highly comparable. They will be used in constructing an Arabic short duration continuous text reading chart. Copyright © 2016 Spanish General Council of Optometry. Published by Elsevier España, S.L.U. All rights reserved.

  12. Double sampling control chart for a first order autoregressive process

    Directory of Open Access Journals (Sweden)

    Fernando A. E. Claro

    2008-12-01

    Full Text Available In this paper we propose the Double Sampling control chart for monitoring processes in which the observations follow a first order autoregressive model. We consider sampling intervals that are sufficiently long to meet the rational subgroup concept. The Double Sampling chart is substantially more efficient than the Shewhart chart and the Variable Sample Size chart. To study the properties of these charts we derived closed-form expressions for the average run length (ARL taking into account the within-subgroup correlation. Numerical results show that this correlation has a significant impact on the chart properties.Neste artigo propomos o gráfico de controle de amostragem dupla para monitoramento de processos nos quais as observações seguem um modelo autoregressivo de primeira ordem. Nós consideramos intervalos de amostragem suficientemente longos em linha com o conceito de subgrupos racionais. O gráfico de controle de amostragem dupla é substancialmente mais eficiente que o Gráfico de Shewhart e do que o Gráfico com Amostra de Tamanho Variável. Para estudar as propriedades destes gráficos nós derivamos expressões de forma-fechada para o Numero Médio de Amostras até o Sinal (NMA levando em conta a correlação dentro do subgrupo. Os resultados numéricos mostram que esta correlação tem impacto significante sobre as propriedades do gráfico.

  13. Webcharts – A Web-based Charting Library for Custom Interactive Data Visualization

    Directory of Open Access Journals (Sweden)

    Nathan Bryant

    2016-07-01

    Full Text Available Webcharts is a JavaScript library built on top of D3.js that creates reusable, flexible, interactive charts that are highly customizable. Webcharts provides a method for creating commonly-used charts, including bar charts, scatterplots, and timelines, through a simple configuration scheme. Charts created with Webcharts allow users to dynamically manipulate chart data, appearance, and behavior both through callback functions and input elements that are tied to chart objects. This approach allows users to create reusable charts that range from simple static graphics to complex interactive data exploration tools with custom user interfaces, all using the same library.

  14. A New Attribute Control Chart using Multiple Dependent State Repetitive Sampling

    KAUST Repository

    Aldosari, Mansour Sattam

    2017-03-25

    In this manuscript, a new attribute control chart using multiple dependent state repetitive sampling is designed. The operational procedure and structure of the proposed control chart is given. The required measures to determine the average run length (ARL) for in-control and out-of-control processes are given. Tables of ARLs are reported for various control chart parameters. The proposed control chart is more sensitive in detecting a small shift in the process as compared to the existing attribute control charts. The simulation study shows the efficiency of the proposed chart over the existing charts. An example is given for the illustration purpose.

  15. Growth charts for children with Ellis–van Creveld syndrome

    OpenAIRE

    Verbeek, Sabine; Eilers, Paul; Lawrence, Karen; Hennekam, Raoul; Versteegh, Florens

    2010-01-01

    textabstractEllis-van Creveld (EvC) syndrome is a congenital malformation syndrome with marked growth retardation. In this study, specific growth charts for EvC patients were derived to allow better follow-up of growth and earlier detection of growth patterns unusual for EvC. With the use of 235 observations of 101 EvC patients (49 males, 52 females), growth charts for males and females from 0 to 20 years of age were derived. Longitudinal and cross-sectional data were collected from an earlie...

  16. New design chart for basic wind speeds in Brazil

    OpenAIRE

    Beck, André T.; Corrêa, Márcio R. S.

    2013-01-01

    The design charts for basic wind speeds currently in use in Brazil [1] were created in 1977, based on wind speed records from 1950 to 1974. The database covered up to 25 years of wind records obtained in 49 weather stations, totaling 919 stationyears of data. Since 1974, additional 37 years of wind records became available, but have not been incorporated in the design code. Hence, the updated wind charts proposed in this paper are long overdue. In this paper, 62 years of wind records in Brazi...

  17. Interactive SIGHT: textual access to simple bar charts

    Science.gov (United States)

    Demir, Seniz; Oliver, David; Schwartz, Edward; Elzer, Stephanie; Carberry, Sandra; Mccoy, Kathleen F.; Chester, Daniel

    2010-12-01

    Information graphics, such as bar charts and line graphs, are an important component of many articles from popular media. The majority of such graphics have an intention (a high-level message) to communicate to the graph viewer. Since the intended message of a graphic is often not repeated in the accompanying text, graphics together with the textual segments contribute to the overall purpose of an article and cannot be ignored. Unfortunately, these visual displays are provided in a format which is not readily accessible to everyone. For example, individuals with sight impairments who use screen readers to listen to documents have limited access to the graphics. This article presents a new accessibility tool, the Interactive SIGHT (Summarizing Information GrapHics Textually) system, that is intended to enable visually impaired users to access the knowledge that one would gain from viewing information graphics found on the web. The current system, which is implemented as a browser extension that works on simple bar charts, can be invoked by a user via a keystroke combination while navigating the web. Once launched, Interactive SIGHT first provides a brief summary that conveys the underlying intention of a bar chart along with the chart's most significant and salient features, and then produces history-aware follow-up responses to provide further information about the chart upon request from the user. We present two user studies that were conducted with sighted and visually impaired users to determine how effective the initial summary and follow-up responses are in conveying the informational content of bar charts, and to evaluate how easy it is to use the system interface. The evaluation results are promising and indicate that the system responses are well-structured and enable visually impaired users to answer key questions about bar charts in an easy-to-use manner. Post-experimental interviews revealed that visually impaired participants were very satisfied with

  18. A Cause-Consequence Chart of a Redundant Protection System

    DEFF Research Database (Denmark)

    Nielsen, Dan Sandvik; Platz, O.; Runge, B.

    1975-01-01

    A cause-consequence chart is applied in analysing failures of a redundant protection system (a core spray system in a nuclear power plant). It is shown how the diagram provides a basis for calculating two probability measures for malfunctioning of the protection system. The test policy of compone......A cause-consequence chart is applied in analysing failures of a redundant protection system (a core spray system in a nuclear power plant). It is shown how the diagram provides a basis for calculating two probability measures for malfunctioning of the protection system. The test policy...

  19. DASHBOARDS & CONTROL CHARTS EXPERIENCES IN IMPROVING SAFETY AT HANFORD WASHINGTON

    Energy Technology Data Exchange (ETDEWEB)

    PREVETTE, S.S.

    2006-02-27

    The aim of this paper is to demonstrate the integration of safety methodology, quality tools, leadership, and teamwork at Hanford and their significant positive impact on safe performance of work. Dashboards, Leading Indicators, Control charts, Pareto Charts, Dr. W. Edward Deming's Red Bead Experiment, and Dr. Deming's System of Profound Knowledge have been the principal tools and theory of an integrated management system. Coupled with involved leadership and teamwork, they have led to significant improvements in worker safety and protection, and environmental restoration at one of the nation's largest nuclear cleanup sites.

  20. jsGraph and jsNMR—Advanced Scientific Charting

    Directory of Open Access Journals (Sweden)

    Norman Pellet

    2014-09-01

    Full Text Available The jsGraph library is a versatile javascript library that allows advanced charting to be rendered interactively in web browsers without relying on server-side image processing. jsGraph is released under the MIT license and is free of charge. While being highly customizable through an intuitive javascript API, jsGraph is optimized to render a large quantity of data in a short amount of time. jsGraphs can display line, scatter, contour or zone series. Examples can be consulted on the project home page [1]. Customization of the chart, its axis and its series is achieved through simple but comprehensive JSON configurations.

  1. Fault detection in electric power systems based on control charts

    Directory of Open Access Journals (Sweden)

    Kisić Emilija

    2013-01-01

    Full Text Available This paper analyzes the control system of the combustion process and protection from explosions in the boiler furnace of thermal power plant using the techniques of control charts. The data from old and newly introduced system for measuring under-pressure differences in boiler furnace at unit B2, TE Nikola Tesla (TENT Obrenovac, were analyzed. The signal of undepressure difference is used for boiler protection function in thermal power plant TENT B. The results that confirm the advantages of the newly introduced system of measurements are presented. A detailed discussion about the benefits and the shortcomings of the control charts application in industrial processes are given in the paper.

  2. The application of mean control chart in managing industrial processes

    Directory of Open Access Journals (Sweden)

    Papić-Blagojević Nataša

    2013-01-01

    Full Text Available Along with the advent of mass production comes the problem of monitoring and maintaining the quality of the product, which stressed the need for the application of selected statistical and mathematical methods in the control process. The main objective of applying the methods of statistical control is continuous quality improvement through permanent monitoring of the process in order to discover the causes of errors. Shewart charts are the most popular method of statistical process control, which performs separation of controlled and uncontrolled variations along with detection of increased variations. This paper presents the example of Shewart mean control chart with application in managing industrial process.

  3. Use of National and International Growth Charts for Studying Height in European Children: Development of Up-To-Date European Height-For-Age Charts

    OpenAIRE

    Marjolein Bonthuis; van Stralen, Karlijn J.; Enrico Verrina; Alberto Edefonti; Molchanova, Elena A.; Hokken-Koelega, Anita C. S.; Franz Schaefer; Jager, Kitty J

    2012-01-01

    textabstractBackground: Growth charts based on data collected in different populations and time periods are key tools to assess children's linear growth. We analyzed the impact of geographic factors and the secular trend on height-for-age charts currently used in European populations, developed up-to-date European growth charts, and studied the effect of using different charts in a sample of growth retarded children. Methods and Findings: In an international survey we obtained 18 unique natio...

  4. Connecting NGSS to Other Literacy Initiatives: An Update of the Rainbow Chart of Earth Science Bigger Ideas (Invited)

    Science.gov (United States)

    Duggan-Haas, D.

    2013-12-01

    The Next Generation Science Standards and the Frameworks upon which they are built, built upon and synthesized a wide range of educational research and development that came before them. For the Earth sciences, this importantly includes a series of initiatives to define literacy within oceanography, atmospheric and climate sciences, and geology. Since the publication of the Frameworks, a similarly structured set of principles for energy literacy was also published. Each set of principles includes seven to nine Essential Principles or Big Ideas, all written at the commencement level. Each of these Principles is undergirded by several Fundamental Concepts. This set of idea sets yields 38 Essential Principles and 247 Fundamental Concepts. How do these relate to the content of NGSS? How can teachers, professional development providers and curriculum specialists make sense of this array of ideas and place it into a coherent conceptual framework? This presentation will answer these questions and more. Of course, there is substantial overlap amongst the sets of principles and with the ideas, practices and principles in NGSS. This presentation will provide and describe a framework that identifies these areas of overlap and contextualizes them within a framework that makes them more manageable for educators and learners. A set of five bigger ideas and a pair of overarching questions assembled with the Essential Principles and Earth & Space Science Disciplinary Core Ideas in the form of a 'Rainbow Chart' shows a consistency of thought across Earth science's sub-disciplines and helps educators navigate this somewhat overwhelming landscape of ideas. These questions and ideas are shown in the included figure and listed below. Overarching Questions: - How do we know what we know? - How does what we know inform our decision making? Bigger Ideas: - Earth is a system of systems. - The flow of energy drives the cycling of matter. - Life, including human life, influences and is

  5. Cartographic Rules and Differences in Nautical Data Visualization on Paper and Electronic Nautical Charts

    Directory of Open Access Journals (Sweden)

    Tea Duplančić Leder

    2013-04-01

    Full Text Available This paper aims to present cartographic rules for the production of paper and electronic navigational charts and main differences in compilation, visualisation and representation of nautical information. Major differences between paper nautical charts and ENC are visualisation of nautical data: colour mixing, resolution of represented nautical objects, human control of display representation and fonts and signatures and chart content are described. It is concluded that electronic navigational charts have many advantages and few shortcomings to paper navigational charts.

  6. MONITORING THE PROCESS MEAN BASED ON QUALITY CONTROL CHARTS USING ON FOLDED RANKED SET SAMPLING

    Directory of Open Access Journals (Sweden)

    Amjad Al-Nasser

    2013-02-01

    Full Text Available In this paper, we propose a new quality control chart for the sample mean based on the folded ranked set sampling (FRSS method. The new charts are compared with the classical control charts using simple random sampling (SRS and ranked set sampling (RSS. A simulation study shows that the FRSS control charts have smaller average run length (ARL compared with their counterpart charts using SRS and RSS.

  7. HAL/SM language specification. [programming languages and computer programming for space shuttles

    Science.gov (United States)

    Williams, G. P. W., Jr.; Ross, C.

    1975-01-01

    A programming language is presented for the flight software of the NASA Space Shuttle program. It is intended to satisfy virtually all of the flight software requirements of the space shuttle. To achieve this, it incorporates a wide range of features, including applications-oriented data types and organizations, real time control mechanisms, and constructs for systems programming tasks. It is a higher order language designed to allow programmers, analysts, and engineers to communicate with the computer in a form approximating natural mathematical expression. Parts of the English language are combined with standard notation to provide a tool that readily encourages programming without demanding computer hardware expertise. Block diagrams and flow charts are included. The semantics of the language is discussed.

  8. Ocean Thermal Energy Conversion program. EPFFEP program for OTEC structural systems

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, H.; Chen, W. F.

    1976-01-01

    A constitutive relation and failure criterion for concrete material under general three-dimensional stress states has been developed using the work-hardening theory of plasticity. The formulation has all the required properties of concrete and gives a close estimate to experimental stresses for complete general stress states. In order that the results of research be readily usable in the analysis of suboceanic structures such as the large shells proposed for adoption in the Ocean Thermal Energy Conversion program (OTEC), corresponding computer code called EPFFEP (Elastic Plastic Fracture Finite Element Program) is developed here to reflect this material response. This report describes the details of this program and its implementation on the computer system CDC 6400. It defines all the input and output of the program along with an example illustrating a typical application of EPFFEP modeling. Detail computer algorithm for the constitutive relations of concrete is also given in the form of flow charts.

  9. Cover Crop Chart: An Intuitive Educational Resource for Extension Professionals

    Science.gov (United States)

    Liebig, Mark A.; Johnson, Holly; Archer, David; Hendrickson, John; Nichols, Kristine; Schmer, Marty; Tanaka, Don

    2013-01-01

    Interest in cover crops by agricultural producers has increased the need for information regarding the suitability of crops for addressing different production and natural resource goals. To help address this need, staff at the USDA-ARS Northern Great Plains Research Laboratory developed a decision aid called the Cover Crop Chart (CCC). Visually…

  10. CHARTING THE ANATOMY PF LINGUISTIC REALITY R.P. Botha ...

    African Journals Online (AJOL)

    CHARTING. THE ANATOMY PF LINGUISTIC. REALITY. R.P. Botha. Department of Linguistics. University of Stellenbosch. Living dangerously. (Ql I represents the kind of question that should be addressed in the opening paper of a conference with the theme. 'Linguis- tics for the language professions'. (Ql I. Has linguistics.

  11. Improved binomial charts for high-quality processes

    NARCIS (Netherlands)

    Albers, Willem/Wim

    For processes concerning attribute data with (very) small failure rate p, often negative binomial control charts are used. The decision whether to stop or continue is made each time r failures have occurred, for some r≥1. Finding the optimal r for detecting a given increase of p first requires

  12. Improved binomial charts for monitoring high-quality processes

    NARCIS (Netherlands)

    Albers, Willem/Wim

    2009-01-01

    For processes concerning attribute data with (very) small failure rate p, often negative binomial control charts are used. The decision whether to stop or continue is made each time r failures have occurred, for some r≥1. Finding the optimal r for detecting a given increase of p first requires

  13. Monitoring obstetricians' performance with statistical process control charts.

    Science.gov (United States)

    Lane, S; Weeks, A; Scholefield, H; Alfirevic, Z

    2007-05-01

    The main objective of this study was to pave the way towards proactive, continuous assessment of individuals and hospitals by demonstrating the application of evidence-based competency standards in maternity care using statistical performance monitoring. Retrospective study using data routinely collected by a large maternity hospital. A large teaching hospital. Clinicians who routinely perform either amniocentesis or ventouse deliveries. As a 'proof of principle', we have used statistical process control (SPC) charts to compare the observed complication rates for amniocentesis and ventouse delivery with the expected complication rates based on published data. The recorded complication rates for amniocentesis and ventouse delivery. The SPC charts identified significant variation in complication rates within the team and showed the ways in which prospective data can be used to provide continuous feedback to individuals on their performance. The study shows that statistical performance monitoring and, in particular, the use of control charts can be a valuable tool in the continuous assessment of individuals and the healthcare service being provided. The control charts provide a more immediate indication of current performance and provide an alternative to performance-based league tables for the presentation of yearly performance data.

  14. Spiking neural network-based control chart pattern recognition

    Directory of Open Access Journals (Sweden)

    Medhat H.A. Awadalla

    2012-03-01

    Full Text Available Due to an increasing competition in products, consumers have become more critical in choosing products. The quality of products has become more important. Statistical Process Control (SPC is usually used to improve the quality of products. Control charting plays the most important role in SPC. Control charts help to monitor the behavior of the process to determine whether it is stable or not. Unnatural patterns in control charts mean that there are some unnatural causes for variations in SPC. Spiking neural networks (SNNs are the third generation of artificial neural networks that consider time as an important feature for information representation and processing. In this paper, a spiking neural network architecture is proposed to be used for control charts pattern recognition (CCPR. Furthermore, enhancements to the SpikeProp learning algorithm are proposed. These enhancements provide additional learning rules for the synaptic delays, time constants and for the neurons thresholds. Simulated experiments have been conducted and the achieved results show a remarkable improvement in the overall performance compared with artificial neural networks.

  15. Control charts for high-quality processes: MAX or CUMAX?

    NARCIS (Netherlands)

    Albers, Willem/Wim

    2012-01-01

    For attribute data with (very) small failure rates control charts were introduced which are based on subsequent groups of r failure times, for some r >= 1. Within this family, it was shown to be attractive to stop once the maximum of such a group is sufficiently small, because this choice allows a

  16. Application of Special Cause Control Charts to Green Sand Process

    Directory of Open Access Journals (Sweden)

    Perzyk M.

    2015-12-01

    Full Text Available Statistical Process Control (SPC based on the well known Shewhart control charts, is widely used in contemporary manufacturing industry, including many foundries. However, the classic SPC methods require that the measured quantities, e.g. process or product parameters, are not auto-correlated, i.e. their current values do not depend on the preceding ones. For the processes which do not obey this assumption the Special Cause Control (SCC charts were proposed, utilizing the residual data obtained from the time-series analysis. In the present paper the results of application of SCC charts to a green sand processing system are presented. The tests, made on real industrial data collected in a big iron foundry, were aimed at the comparison of occurrences of out-of-control signals detected in the original data with those appeared in the residual data. It was found that application of the SCC charts reduces numbers of the signals in almost all cases It is concluded that it can be helpful in avoiding false signals, i.e. resulting from predictable factors.

  17. Control charts for high-quality processes: MAX or CUMAX?

    NARCIS (Netherlands)

    Albers, Willem/Wim

    For attribute data with (very) small failure rates control charts were introduced which are based on subsequent groups of r failure times, for some r >= 1. Within this family, it was shown to be attractive to stop once the maximum of such a group is sufficiently small, because this choice allows a

  18. Control charts for health care monitoring under overdispersion

    NARCIS (Netherlands)

    Albers, Willem/Wim

    An attractive way to control attribute data from high quality processes is to wait till r $\\geq$ 1 failures have occurred. The choice of r in such negative binomial charts is dictated by how much the failure rate is supposed to change during Out-of-Control. However, these results have been derived

  19. Development of a prehospital vital signs chart sharing system.

    Science.gov (United States)

    Nakada, Taka-aki; Masunaga, Naohisa; Nakao, Shota; Narita, Maiko; Fuse, Takashi; Watanabe, Hiroaki; Mizushima, Yasuaki; Matsuoka, Tetsuya

    2016-01-01

    Physiological parameters are crucial for the caring of trauma patients. There is a significant loss of prehospital vital signs data of patients during handover between prehospital and in-hospital teams. Effective strategies for reducing the loss remain a challenging research area. We tested whether the newly developed electronic automated prehospital vital signs chart sharing system would increase the amount of prehospital vital signs data shared with a remote trauma center prior to hospital arrival. Fifty trauma patients, transferred to a level I trauma center in Japan, were studied. The primary outcome variable was the number of prehospital vital signs shared with the trauma center prior to hospital arrival. The prehospital vital signs chart sharing system significantly increased the number of prehospital vital signs, including blood pressure, heart rate, and oxygen saturation, shared with the in-hospital team at a remote trauma center prior to patient arrival at the hospital (P prehospital vital signs during ambulance transfer between patients who had severe bleeding and non-severe bleeding within 24 hours after injury onset. Vital signs data collected during ambulance transfer via patient monitors could be automatically converted to easily visible patient charts and effectively shared with the remote trauma center prior to hospital arrival. The prehospital vital signs chart sharing system increased the number of precise vital signs shared prior to patient arrival at the hospital, which can potentially contribute to better trauma care without increasing labor and reduce information loss during clinical handover. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Individuals charts and additional tests for changes in spread

    NARCIS (Netherlands)

    Trip, Albert; Wieringa, Jaap E.

    2003-01-01

    Some authors recommend the use of an additional test for detecting increases in the spread, when using a control chart for individual observations. We examine this recommendation both in a practical situation and theoretically. Both studies show that the additional test gives somewhat more power for

  1. Growth charts for children with Ellis-van Creveld syndrome

    NARCIS (Netherlands)

    S. Verbeek (Sabine); P.H.C. Eilers (Paul); K.A. Lawrence (Karen); R.C.M. Hennekam (Raoul); F.G. Versteegh (Florens)

    2011-01-01

    textabstractEllis-van Creveld (EvC) syndrome is a congenital malformation syndrome with marked growth retardation. In this study, specific growth charts for EvC patients were derived to allow better follow-up of growth and earlier detection of growth patterns unusual for EvC. With the use of 235

  2. Reference chart for relative weight change to detect hypernatraemic dehydration

    NARCIS (Netherlands)

    Dommelen, P. van; Wouwe, J.P. van; Breuning-Boers, J.M.; Buuren, S. van; Verkerk, P.H.

    2007-01-01

    Objective: The validity of the rule of thumb that infants may have a weight loss of 10% in the first days after birth is unknown. We assessed the validity of this and other rules to detect breast-fed infants with hypernatraemic dehydration. Design: A reference chart for relative weight change was

  3. Charting the anatomy of linguistic reality | Botha | Stellenbosch ...

    African Journals Online (AJOL)

    Stellenbosch Papers in Linguistics. Journal Home · ABOUT · Advanced Search · Current Issue · Archives · Journal Home > Vol 25 (1992) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Charting the anatomy of linguistic reality. RP Botha. Abstract. No Abstract.

  4. US Nuclear Regulatory Commission organization charts and functional statements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    This document contains organization charts for the U.S. Nuclear Regulatory Commission (NRC) and for the five offices of the NRC. Function statements are provided delineating the major responsibilities and operations of each office. Organization and function are provided to the branch level. The head of each office, division, and branch is also listed.

  5. 46 CFR 184.420 - Charts and nautical publications.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Charts and nautical publications. 184.420 Section 184.420 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Navigation Equipment § 184.420...

  6. Processing Academic Language through Four Corners Vocabulary Chart Applications

    Science.gov (United States)

    Smith, Sarah; Sanchez, Claudia; Betty, Sharon; Davis, Shiloh

    2016-01-01

    4 Corners Vocabulary Charts (FCVCs) are explored as a multipurpose vehicle for processing academic language in a 5th-grade classroom. FCVCs typically display a vocabulary word, an illustration of the word, synonyms associated with the word, a sentence using a given vocabulary word, and a definition of the term in students' words. The use of…

  7. EXIT Chart Analysis of Binary Message-Passing Decoders

    DEFF Research Database (Denmark)

    Lechner, Gottfried; Pedersen, Troels; Kramer, Gerhard

    2007-01-01

    Binary message-passing decoders for LDPC codes are analyzed using EXIT charts. For the analysis, the variable node decoder performs all computations in the L-value domain. For the special case of a hard decision channel, this leads to the well know Gallager B algorithm, while the analysis can...

  8. Behind Isotype Charts: The Design of Number-Fact Pictures

    DEFF Research Database (Denmark)

    Pedersen, Pia

    2017-01-01

    For more than 40 years, Marie Neurath designed ISOTYPE charts using pictograms as graphical units to make a variety of information more accessible for the layman. She was a transformer linking science and design by using the benefits of both worlds to meet the public’s interests. Significant...

  9. The Multi-Vari Chart -- A Systematic Approach

    NARCIS (Netherlands)

    de Mast, J.; Roes, K.C.B.; Does, R.J.M.M.

    1999-01-01

    Prior to setting up a designed experiment or setting up a monitoring system for a process most experimenters perform an exploratory study to investigate thestructure of the process' variation. Tools that are frequently used for such a study are predominantly graphical in nature.The multi-vari chart

  10. Testing for Sphericity in Phase I Control Chart Applications

    DEFF Research Database (Denmark)

    Windfeldt, Gitte Bjørg; Bisgaard, Søren

    2009-01-01

    When using (x) over bar -R charts it is a crucial assumption that the observations within samples are independent and have common variance. However, this assumption is almost never checked. We propose to use the samples gathered during the phase I study and the test for distributional sphericity...

  11. Translating Message Sequence Charts to other Process Languages using Process

    DEFF Research Database (Denmark)

    Lassen, Kristian Bisgaard; van Dongen, Boudewijn F.

    2008-01-01

    Message Sequence Charts (MSCs) are a well known language for speci- fying scenarios that describe how different actors (e.g., system components, people, or organizations) interact. MSCs are often used as a starting point for software analysts to discuss the behavior of a system with different...

  12. Biaxial charts for rectangular reinforced columns in accordance with ...

    African Journals Online (AJOL)

    linearity arising from the non-linear stress-strain relationships and the cracking of the cross-section. · As a result, the systematic production of biaxial design charts necessitates the application of numerical methods that are based on iterations.

  13. Preparation of unixaial chart for rectangular concrete-filled steel ...

    African Journals Online (AJOL)

    However, their design procedure as proposed by the relevant Ethiopian Building Code Standard, which is also a derivative of the corresponding European Standard Eurocode 4 calls for extensive numerical effort for drawing the moment -axial-force interaction charts. Furthermore, the results obtained following those ...

  14. Biaxial charts for rectangular reinforced columns in accordance with ...

    African Journals Online (AJOL)

    Biaxial charts for rectangular reinforced columns in accordance with the Ethiopian building code standard EBCS-2:Part1. ... Questions about PDFs. Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.

  15. The 'History and Fate of the Universe' chart debuts

    CERN Multimedia

    Yarris, L

    2003-01-01

    A chart that illustrates and summarizes what is now known about the history and fate of the universe has been developed by scientists at the Lawrence Berkeley National Laboratory in collaboration with the Contemporary Physics Education Project (CPEP). More than 11,000 copies will be distributed to high school science teachers across the nation for field-testing with their students (1 page).

  16. Fluorinated Silsesquioxanes: Structure, Solubility, and Wetting (Briefing charts)

    Science.gov (United States)

    2015-08-01

    Charts 3. DATES COVERED (From - To) July 2015-July 2015 4. TITLE AND SUBTITLE FLUORINATED SILSESQUIOXANES: STRUCTURE, SOLUBILITY , AND WETTING...FLUORINATED SILSESQUIOXANES: STRUCTURE, SOLUBILITY , AND WETTING Joseph Mabry, Andrew Guenthner, Scott Iacono, Raymond Campos, Sean Ramirez, Brian Moore...Crystalline solids • Soluble in fluorinated solvents 5DISTRIBUTION A. Approved for public release; distribution unlimited. • Spin-cast surface of FD

  17. Memory-type control charts in statistical process control

    NARCIS (Netherlands)

    Abbas, N.

    2012-01-01

    Control chart is the most important statistical tool to manage the business processes. It is a graph of measurements on a quality characteristic of the process on the vertical axis plotted against time on the horizontal axis. The graph is completed with control limits that cause variation mark. Once

  18. Robust Point Location Estimators for the EWMA Control Chart

    NARCIS (Netherlands)

    Zwetsloot, I.M.; Schoonhoven, M.; Does, R.J.M.M.

    2016-01-01

    In practice, the EWMA control chart for process monitoring is based on parameters estimated from a retrospective data set representing the process characteristic under study. This data set may contain contaminated observations, which in turn can affect the estimates and hence the control chart’s

  19. A Process Algebra Semantics for Message Sequence Chart Documents

    NARCIS (Netherlands)

    Gehrke, T.; Huhn, M.; Rensink, Arend; Wehrheim, H.

    1998-01-01

    Message Sequence Charts (MSCs) are a graphical and textual language for the specification of message passing systems, in particular telecommunication systems. MSCs are standardised by the Internal Telecommunication Union in standard Z.120, Included in the standard is a formal semantics for MSCs by

  20. An Algebraic Semantics for Message Sequence Chart Documents

    NARCIS (Netherlands)

    Budkowski, S.; Gehrke, T.; Huhn, M.; Cavalli, A.; Najm, E.; Rensink, Arend; Wehrheim, H.

    1998-01-01

    Message Sequence Charts (MSCs) are a graphical and textual language for the specification of message passing systems, in particular telecommunication systems, MSCs are standardised by the Internal Telecommunication Union in standard Z.120. Included in the standard is a formal semantics for MSCs by

  1. 14 CFR Section 7 - Chart of Profit and Loss Accounts

    Science.gov (United States)

    2010-01-01

    ... II carriers Group III carriers operating revenues and expenses Transport revenues: 01Passenger: 01... expense-net: 80.0Interest income 81 81 81 86.0Income from nontransport ventures 81 81 81 87.0Equity in... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Chart of Profit and Loss Accounts Section 7...

  2. Constant-Pressure Combustion Charts Including Effects of Diluent Addition

    Science.gov (United States)

    Turner, L Richard; Bogart, Donald

    1949-01-01

    Charts are presented for the calculation of (a) the final temperatures and the temperature changes involved in constant-pressure combustion processes of air and in products of combustion of air and hydrocarbon fuels, and (b) the quantity of hydrocarbon fuels required in order to attain a specified combustion temperature when water, alcohol, water-alcohol mixtures, liquid ammonia, liquid carbon dioxide, liquid nitrogen, liquid oxygen, or their mixtures are added to air as diluents or refrigerants. The ideal combustion process and combustion with incomplete heat release from the primary fuel and from combustible diluents are considered. The effect of preheating the mixture of air and diluents and the effect of an initial water-vapor content in the combustion air on the required fuel quantity are also included. The charts are applicable only to processes in which the final mixture is leaner than stoichiometric and at temperatures where dissociation is unimportant. A chart is also included to permit the calculation of the stoichiometric ratio of hydrocarbon fuel to air with diluent addition. The use of the charts is illustrated by numerical examples.

  3. 2007 Estimated International Energy Flows

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C A; Belles, R D; Simon, A J

    2011-03-10

    An energy flow chart or 'atlas' for 136 countries has been constructed from data maintained by the International Energy Agency (IEA) and estimates of energy use patterns for the year 2007. Approximately 490 exajoules (460 quadrillion BTU) of primary energy are used in aggregate by these countries each year. While the basic structure of the energy system is consistent from country to country, patterns of resource use and consumption vary. Energy can be visualized as it flows from resources (i.e. coal, petroleum, natural gas) through transformations such as electricity generation to end uses (i.e. residential, commercial, industrial, transportation). These flow patterns are visualized in this atlas of 136 country-level energy flow charts.

  4. Semiotic evaluation of Lithuania military air navigation charts

    Science.gov (United States)

    Ovodas, Donatas; Česnulevičius, Algimantas

    2014-06-01

    Research of semiotic aspects Lithuanian military air navigation charts was based on the semantic, graphic and information load analysis. The aim of semantic analysis was to determine how the conventional cartographical symbols, used in air navigation charts, correspond with carto-linguistic and carto-semiotic requirements. The analysis of all the markings was performed complex and collected by questionnaire were interviewed various respondents: pilots, cartographers and other chart users. The researches seek two aims: evaluate information and graphical load of military air navigation charts. Information load evaluated to calculate all objects and phenomenon, which was in 25 cm² of map. Charts analysis showed that in low flight charts (LFC) average information load are 4 - 5 times richer than in the operational maps. Map signs optimization on LFC has to be managed very carefully, choosing signs that can reduce the load of information and helps for the information transfer process. Graphical load of maps evaluated of aeronautical maps is not great (5 - 12%) and does not require reduction the information load and generalization of charts. Air navigation charts analysis pointed that not all air navigation sings correspond carto-semiotic requirements and must be improved. The authors suggested some new sings for military air navigation chart, which are simpler, equivalent to human psychophysical perception criteria, creates faster communication and less load on the chart. Badania semiotycznych aspektów litewskich wojskowych map żeglugi powietrznej bazowały na semantycznej, graficznej i informacyjnej analizie treści tych map. Celem analizy semantycznej było określenie na ile tradycyjne symbole kartograficzne stosowane na mapach nawigacji lotniczej są zgodne z wymogami języka kartograficznego oraz zasadami stosowania znaków kartograficznych. Powyższe analizy przeprowadzono w sposób kompleksowy, informacje zebrano za pomocą ankiet, przeprowadzając wywiady w r

  5. Improving drug chart documentation in elective surgical patient admissions.

    Science.gov (United States)

    Thompson, Alice

    2014-01-01

    National Institute for Health and Care Excellence (NICE) guidelines state that all healthcare organisations should put policies in place for medication reconciliation on admission. At Croydon University Hospital a medication history had previously been taken in Foundation Year 1 (FY1) preoperative clinics. However, when these clinics were deemed unnecessary, this opportunity for drug chart documentation was lost, along with an awareness of this responsibility among the FY1s. As a result patients were being admitted to wards without adequate drug chart documentation which resulted in a serious untoward incident occurring. This project aimed to increase awareness among FY1s of this responsibility and as a result increase drug chart documentation in postoperative elective surgical patients. The drug charts of 40 postoperative elective surgical patients admitted to all surgical wards were reviewed over a 2 week period. 12.5% (4/32) of patients taking regular medication had these correctly prescribed, with 'high risk medication omissions' found in 7.5% (3/40). Documentation of an allergy status was absent in 17.5% (7/40) of patients, including 5% (2/40) of whom had a known drug allergy. To create awareness of this responsibility, first, a presentation was given to the FY1s, second, posters to prompt action were placed on the elective surgical wards, and finally, the Director of Medical Education emailed the FY1s reiterating these facts. We then reviewed the drug charts of 45 elective postoperative patients over a 2 week period following these interventions. The results showed: correct prescription of regular medications improved to 48% (16/33); 'high risk medication omissions' reduced to 4% (2/45); documentation of allergy status on the drug charts increased to 87% (39/45); failure to document a known drug allergy on the drug chart fell to 2% (1/45); and patients with a 'high risk medication omission' or an undocumented known drug allergy decreased from 12.5% (5/40) to

  6. A customised portable LogMAR chart with adjustable chart illumination for use as a mass screening device in the rural population

    Directory of Open Access Journals (Sweden)

    Gouthaman M

    2005-01-01

    Full Text Available Aim: To develop a customised, portable, cost-effective (logarithmic minimal angle resolution LogMAR chart with adjustable illumination for use as a mass vision-screening device in the rural population. Materials and Methods : Visual acuity of 100 individuals was evaluated with a customised chart and compared with the standard Early Treatment Diabetic Retinopathy Study (ETDRS chart and Snellen′s Chart. Bland and Altman analytical techniques were used for analysis. Results: Test-retest variability of the customised chart was just a one-line difference (95% CI for agreement, and so were the results with the standard ETDRS charts; a variability of 3-line was noted with Snellen′s chart. Two-line differences were observed when comparison was made with Standard ETDRS chart and 2 to 3-line differences with Snellen′s chart. Conclusion: The customised portable LogMAR chart with adjustable illumination shows less test-retest variability and better agreement with standard ETDRS chart; therefore, it can be used as a mass vision-screening device in rural settings.

  7. Inaccurate Dental Charting in an Audit of 1128 General Dental Practice Records.

    Science.gov (United States)

    Brown, Nathan L; Jephcote, Victoria E L

    2017-03-01

    Fourteen dentists at different practices in the UK assessed the dental charts of 1128 patients who were new to the dentist but not new to the practice; 44% of the dental charts were found to be inaccurate. Inaccuracy of the individual practice-based charts ranged between 16% for the best performing practices to 83% for the worst: 5% of dental charts had too many teeth charted and 5% had too few teeth charted; 13% of charts had missed amalgam restorations and 18% had missed tooth-coloured restorations; 5% of charts had amalgam restorations recorded but with the surfaces incorrect (eg an MO restoration charted but a DO restoration actually present); 9% of charts had tooth-coloured restoration surfaces incorrectly recorded. For 7.5% of charts, amalgams were charted but not actually present. Other inaccuracies were also noted. The authors reinforce the requirements of the GDC, the advice of defence organizations, and the forensic importance of accurate dental charts. Clinical relevance: Dental charting forms part of the patient’s dental records, and the GDC requires dentists to maintain complete and accurate dental records.

  8. SOCR Motion Charts: An Efficient, Open-Source, Interactive and Dynamic Applet for Visualizing Longitudinal Multivariate Data.

    Science.gov (United States)

    Al-Aziz, Jameel; Christou, Nicolas; Dinov, Ivo D

    2010-01-01

    The amount, complexity and provenance of data have dramatically increased in the past five years. Visualization of observed and simulated data is a critical component of any social, environmental, biomedical or scientific quest. Dynamic, exploratory and interactive visualization of multivariate data, without preprocessing by dimensionality reduction, remains a nearly insurmountable challenge. The Statistics Online Computational Resource (www.SOCR.ucla.edu) provides portable online aids for probability and statistics education, technology-based instruction and statistical computing. We have developed a new Java-based infrastructure, SOCR Motion Charts, for discovery-based exploratory analysis of multivariate data. This interactive data visualization tool enables the visualization of high-dimensional longitudinal data. SOCR Motion Charts allows mapping of ordinal, nominal and quantitative variables onto time, 2D axes, size, colors, glyphs and appearance characteristics, which facilitates the interactive display of multidimensional data. We validated this new visualization paradigm using several publicly available multivariate datasets including Ice-Thickness, Housing Prices, Consumer Price Index, and California Ozone Data. SOCR Motion Charts is designed using object-oriented programming, implemented as a Java Web-applet and is available to the entire community on the web at www.socr.ucla.edu/SOCR_MotionCharts. It can be used as an instructional tool for rendering and interrogating high-dimensional data in the classroom, as well as a research tool for exploratory data analysis.

  9. Estimates of tracer-based piston-flow ages of groundwater from selected sites-National Water-Quality Assessment Program, 1992-2005

    Science.gov (United States)

    Hinkle, Stephen R.; Shapiro, Stephanie D.; Plummer, L. Niel; Busenberg, Eurybiades; Widman, Peggy K.; Casile, Gerolamo C.; Wayland, Julian E.

    2011-01-01

    This report documents selected age data interpreted from measured concentrations of environmental tracers in groundwater from 1,399 National Water-Quality Assessment (NAWQA) Program groundwater sites across the United States. The tracers of interest were chlorofluorocarbons (CFCs), sulfur hexafluoride (SF6), and tritium/helium-3 (3H/3He). Tracer data compiled for this analysis primarily were from wells representing two types of NAWQA groundwater studies - Land-Use Studies (shallow wells, usually monitoring wells, in recharge areas under dominant land-use settings) and Major-Aquifer Studies (wells, usually domestic supply wells, in principal aquifers and representing the shallow, used resource). Reference wells (wells representing groundwater minimally impacted by anthropogenic activities) associated with Land-Use Studies also were included. Tracer samples were collected between 1992 and 2005, although two networks sampled from 2006 to 2007 were included because of network-specific needs. Tracer data from other NAWQA Program components (Flow System Studies, which are assessments of processes and trends along groundwater flow paths, and various topical studies) were not compiled herein. Tracer data from NAWQA Land-Use Studies and Major-Aquifer Studies that previously had been interpreted and published are compiled herein (as piston-flow ages), but have not been reinterpreted. Tracer data that previously had not been interpreted and published are evaluated using documented methods and compiled with aqueous concentrations, equivalent atmospheric concentrations (for CFCs and SF6), estimates of tracer-based piston-flow ages, and selected ancillary data, such as redox indicators, well construction, and major dissolved gases (N2, O2, Ar, CH4, and CO2). Tracer-based piston-flow ages documented in this report are simplistic representations of the tracer data. Tracer-based piston-flow ages are a convenient means of conceptualizing groundwater age. However, the piston-flow

  10. edcc : An R Package for the Economic Design of the Control Chart

    Directory of Open Access Journals (Sweden)

    Weicheng Zhu

    2013-01-01

    Full Text Available The basic purpose of the economic design of the control charts is to find the optimum control charts parameters to minimize the process cost. In this paper, an R package, edcc (economic design of control charts, which provides a numerical method to find the optimum chart parameters is presented using the unified approach of the economic design. Also, some examples are given to illustrate how to use this package. The types of the control chart available in the edcc package are X̅, CUSUM (cumulative sum, and EWMA (exponentially-weighted moving average control charts.

  11. A Variable Sampling Interval Synthetic Xbar Chart for the Process Mean

    OpenAIRE

    Lee, Lei Yong; Khoo, Michael Boon Chong; Teh, Sin Yin; Lee, Ming Ha

    2015-01-01

    The usual practice of using a control chart to monitor a process is to take samples from the process with fixed sampling interval (FSI). In this paper, a synthetic X ? control chart with the variable sampling interval (VSI) feature is proposed for monitoring changes in the process mean. The VSI synthetic X ? chart integrates the VSI X ? chart and the VSI conforming run length (CRL) chart. The proposed VSI synthetic X ? chart is evaluated using the average time to signal (ATS) criterion. The o...

  12. Program Management Plan (PMP) for Rapid Runway Repair (RRR)

    Science.gov (United States)

    1983-04-15

    18 6 PROGRAM OFFICE ORGANIZATION CHART .................. 54 LIST OF TABLES Table Page 1 ESTIMATED RISK TO IMPROVE CAPABILITIES BY 1988...OPCer PROGRAM MANAGER F~ l "t U RPAC Figure 6. Program Office Organization Chart 54 data. The RRR Task Order Contract provides technical support and

  13. Original observations-based control charts for monitoring the mean of auto-correlated processes: A comparison among modified Shewhart, modified EWMA, and ARMAST charts

    Science.gov (United States)

    Ulkhaq, M. Mujiya; Dewanta, Favian

    2017-11-01

    Conventional control charts are considered satisfied enough to monitor the observations that are assumed to be independent and identically distributed (IID). Nevertheless, in real industry environment, the process data exhibits some serial dependence or autocorrelation in which the IID assumption is violated. With the presence of autocorrelation, the control limits of the control charts should be loosened since the tight control limits can decrease the in-control average run length (ARL); thus, lead to a higher false alarm rate. This paper aims to compare the performance and investigate the relative effectiveness of three control charts: modified Shewhart (mShewhart), modified EWMA (mEWMA), and ARMAST charts, based on the original observations when the process data follows ARMA(1,1) model. The parameters of those charts are manipulated to give the in-control ARL of 370. The simulation results shows that the mShewhart chart is not completely robust to the deviation from IID assumption for small mean shifts. Although the mEWMA chart is very good at detecting small mean shift, the optimal ARMAST chart outperforms the mEWMA chart when there is autocorrelation in the process. In addition, the ARMAST chart also surpasses the mShewart in monitoring large mean shift.

  14. A Variable Sampling Interval Synthetic Xbar Chart for the Process Mean.

    Directory of Open Access Journals (Sweden)

    Lei Yong Lee

    Full Text Available The usual practice of using a control chart to monitor a process is to take samples from the process with fixed sampling interval (FSI. In this paper, a synthetic X control chart with the variable sampling interval (VSI feature is proposed for monitoring changes in the process mean. The VSI synthetic X chart integrates the VSI X chart and the VSI conforming run length (CRL chart. The proposed VSI synthetic X chart is evaluated using the average time to signal (ATS criterion. The optimal charting parameters of the proposed chart are obtained by minimizing the out-of-control ATS for a desired shift. Comparisons between the VSI synthetic X chart and the existing X, synthetic X, VSI X and EWMA X charts, in terms of ATS, are made. The ATS results show that the VSI synthetic X chart outperforms the other X type charts for detecting moderate and large shifts. An illustrative example is also presented to explain the application of the VSI synthetic X chart.

  15. A Variable Sampling Interval Synthetic Xbar Chart for the Process Mean.

    Science.gov (United States)

    Lee, Lei Yong; Khoo, Michael Boon Chong; Teh, Sin Yin; Lee, Ming Ha

    2015-01-01

    The usual practice of using a control chart to monitor a process is to take samples from the process with fixed sampling interval (FSI). In this paper, a synthetic X control chart with the variable sampling interval (VSI) feature is proposed for monitoring changes in the process mean. The VSI synthetic X chart integrates the VSI X chart and the VSI conforming run length (CRL) chart. The proposed VSI synthetic X chart is evaluated using the average time to signal (ATS) criterion. The optimal charting parameters of the proposed chart are obtained by minimizing the out-of-control ATS for a desired shift. Comparisons between the VSI synthetic X chart and the existing X, synthetic X, VSI X and EWMA X charts, in terms of ATS, are made. The ATS results show that the VSI synthetic X chart outperforms the other X type charts for detecting moderate and large shifts. An illustrative example is also presented to explain the application of the VSI synthetic X chart.

  16. Encapsulating connections on SoC designs using ASM++ charts

    Science.gov (United States)

    de Pablo, Santiago; Herrero, Luis C.; Martínez, Fernando; Rey, Alexis B.

    This article presents a methodology to encapsulate, not only the functionality of several SoC modules, but also the connections between those modules. To achieve these results, the possibilities of Algorithmic State Machines (ASM charts) have been extended to develop a compiler. Using this approach, a SoC design becomes a set of chart boxes and links: several boxes describe parameterized modules in a hierarchical fashion, other boxes encapsulate their connections, and all boxes are linked together using simple lines. At last, a compiler processes all required files and generates the corresponding VHDL or Verilog code, valid for simulation and synthesis. A small SoC design with two DSP processors is shown as an example.

  17. Syndrome-specific growth charts for 22q11.2 deletion syndrome in Caucasian children.

    Science.gov (United States)

    Habel, Alex; McGinn, Michael-John; Zackai, Elaine H; Unanue, Nancy; McDonald-McGinn, Donna M

    2012-11-01

    Growth faltering occurs frequently in infancy in the 22q11 Deletion syndrome (22q11 DS). The subsequent course of growth in childhood and outcome for final adult height lacks consensus. We analyzed 5,149 growth data points from 812 Caucasian subjects with 22q11 DS, from neonates to 37 years old. Charts were constructed for height, weight, body mass index, and head circumference (OFC) using the LMS Chart Maker program. These charts were compared with the WHO birth to 4 years growth standard and US CDC 2000 growth reference between 5 and 20 years. Starting from the 50th centile at birth, by 6-9 months of age boys mean height and weight had fallen to the 9th centile, as did girls height but their weight fell less markedly, to the 25th centile. Feeding difficulties were non-contributory. In children under 2 years old with congenital heart disease (CHD) mean weight was -0.5 SD lighter than no CHD. Catch up growth occurred, more rapid in weight than height in boys. Up to 10 years old both sexes tracked between the 9th and 25th centiles. In adolescence, the trend was to overweight rather than obesity. At 19 years mean height was -0.72 SD for boys, -0.89 SD girls. OFC was significantly smaller than the WHO standard in infancy, between the 9th and 25th centile, rising to the 25th centile by 5 years old. Thereafter the mean was close to the 9th centile of the OFC UK growth reference, more prolonged and marked than in previous studies. Copyright © 2012 Wiley Periodicals, Inc.

  18. APPROACHES FOR PROBLEM DIAGNOSIS VIA STATISTICAL PROCESS CONTROL CHARTS

    OpenAIRE

    KOÇER, BÜLENT; BİRGÖREN, Burak

    2010-01-01

    ABSTRACT Statistical process control charts aim  to detect out-of-control signals which indicate existence of special causes effecting the process. Once such a signal is detected, the interpretation of the signal, that is, discovering the actual causes behind the signal, rests upon the shoulders  of operators or engineers. Recently, some techniques have been developed  for making this interpretation process easier. This study presents an overview of such techniques ...

  19. Applications of Control Charts in Medicine and Epidemiology

    OpenAIRE

    Sego, Landon Hugh

    2006-01-01

    We consider two applications of control charts in health care. The first involves the comparison of four methods designed to detect an increase in the incidence rate of a rare health event, such as a congenital malformation. A number of methods have been proposed: among these are the Sets method, two modifications of the Sets method, and the CUSUM method based on the Poisson distribution. Many of the previously published comparisons of these methods used unrealistic assumptions or ignored i...

  20. Notre Dame Nuclear Database: A New Chart of Nuclides

    Science.gov (United States)

    Lee, Kevin; Khouw, Timothy; Fasano, Patrick; Mumpower, Matthew; Aprahamian, Ani

    2014-09-01

    Nuclear data is critical to research fields from medicine to astrophysics. We are creating a database, the Notre Dame Nuclear Database, which can store theoretical and experimental datasets. We place emphasis on storing metadata and user interaction with the database. Users are able to search in addition to the specific nuclear datum, the author(s), the facility where the measurements were made, the institution of the facility, and device or method/technique used. We also allow users to interact with the database by providing online search, an interactive nuclide chart, and a command line interface. The nuclide chart is a more descriptive version of the periodic table that can be used to visualize nuclear properties such as half-lives and mass. We achieve this by using D3 (Data Driven Documents), HTML, and CSS3 to plot the nuclides and color them accordingly. Search capabilities can be applied dynamically to the chart by using Python to communicate with MySQL, allowing for customization. Users can save the customized chart they create to any image format. These features provide a unique approach for researchers to interface with nuclear data. We report on the current progress of this project and will present a working demo that highlights each aspect of the aforementioned features. This is the first time that all available technologies are put to use to make nuclear data more accessible than ever before in a manner that is much easier and fully detailed. This is a first and we will make it available as open source ware.

  1. Monitoring of mechanical sugarcane harvesting through control charts

    OpenAIRE

    Voltarelli,Murilo A.; Silva,Rouverson P. da; Zerbato,Cristiano; Paixão,Carla S. S.; Tavares,Tiago de O.

    2015-01-01

    ABSTRACT Statistical process control in mechanized farming is a new way to assess operation quality. In this sense, we aimed to compare three statistical process control tools applied to losses in sugarcane mechanical harvesting to determine the best control chart template for this quality indicator. Losses were daily monitored in farms located within Triângulo Mineiro region, in Minas Gerais state, Brazil. They were carried over a period of 70 days in the 2014 harvest. At the end of the eval...

  2. The construction of control chart for PM10 functional data

    Science.gov (United States)

    Shaadan, Norshahida; Jemain, Abdul Aziz; Deni, Sayang Mohd

    2014-06-01

    In this paper, a statistical procedure to construct a control chart for monitoring air quality (PM10) using functional data is proposed. A set of daily indices that represent the daily PM10 curves were obtained using Functional Principal Component Analysis (FPCA). By means of an iterative charting procedure, a reference data set that represented a stable PM10 process was obtained. The data were then used as a reference for monitoring future data. The application of the procedure was conducted using seven-year (2004-2010) period of recorded data from the Klang air quality monitoring station located in the Klang Valley region of Peninsular Malaysia. The study showed that the control chart provided a useful visualization tool for monitoring air quality and was capable in detecting abnormality in the process system. As in the case of Klang station, the results showed that with reference to 2004-2008, the air quality (PM10) in 2010 was better than that in 2009.

  3. Congestive Heart Failure Cardiopoietic Regenerative Therapy (CHART-1) trial design.

    Science.gov (United States)

    Bartunek, Jozef; Davison, Beth; Sherman, Warren; Povsic, Thomas; Henry, Timothy D; Gersh, Bernard; Metra, Marco; Filippatos, Gerasimos; Hajjar, Roger; Behfar, Atta; Homsy, Christian; Cotter, Gad; Wijns, William; Tendera, Michal; Terzic, Andre

    2016-02-01

    Cardiopoiesis is a conditioning programme that aims to upgrade the cardioregenerative aptitude of patient-derived stem cells through lineage specification. Cardiopoietic stem cells tested initially for feasibility and safety exhibited signs of clinical benefit in patients with ischaemic heart failure (HF) warranting definitive evaluation. Accordingly, CHART-1 is designed as a large randomized, sham-controlled multicentre study aimed to validate cardiopoietic stem cell therapy. Patients (n = 240) with chronic HF secondary to ischaemic heart disease, reduced LVEF (Heart Failure Questionnaire score, 6 min walk test, LV end-systolic volume, and LVEF at 9 months. The secondary efficacy endpoint is the time to cardiovascular death or worsening HF at 12 months. Safety endpoints include mortality, readmissions, aborted sudden deaths, and serious adverse events at 12 and 24 months. The CHART-1 clinical trial is powered to examine the therapeutic impact of lineage-directed stem cells as a strategy to achieve cardiac regeneration in HF populations. On completion, CHART-1 will offer a definitive evaluation of the efficacy and safety of cardiopoietic stem cells in the treatment of chronic ischaemic HF. NCT01768702. © 2015 The Authors European Journal of Heart Failure © 2015 European Society of Cardiology.

  4. Recognition of control chart patterns with incomplete samples

    Science.gov (United States)

    Miftah Abdelrahman Senoussi, Ahmed; Masood, Ibrahim; Nasrull Abdol Rahman, Mohd; Fahrul Hassan, Mohd

    2017-08-01

    In quality control, automated recognition of statistical process control (SPC) chart patterns is an effective technique for monitoring unnatural variation (UV) in manufacturing process. In most studies, focus was given on complete patterns by assuming there is no constrain in the SPC samples. Nevertheless, there is in-practice case whereby the SPC samples cannot be captured properly due to measurement sensor error or human error. Thus, this research aims to design a recognition scheme for incomplete samples pattern that will be useful for an industrial application. The design methodology involves three phases: (i) simulation of UV and SPC chart patterns, (ii) design of pattern recognition scheme, and (iii) evaluation of performance recognition. It involves modelling of the simulated SPC samples in bivariate quality control, raw data input representation, and recognizer training and testing. The proposed technique indicates a high recognition accuracy (normal pattern = 99.5%, shift patterns = 97.5%). This research will provide a new perspective in SPC charting scheme when dealing with constraint in terms of incomplete samples, which is greatly useful for an industrial practitioner in finding the solution for corrective action.

  5. SpeckTackle: JavaScript charts for spectroscopy.

    Science.gov (United States)

    Beisken, Stephan; Conesa, Pablo; Haug, Kenneth; Salek, Reza M; Steinbeck, Christoph

    2015-01-01

    Spectra visualisation from methods such as mass spectroscopy, infrared spectroscopy or nuclear magnetic resonance is an essential part of every web-facing spectral resource. The development of an intuitive and versatile visualisation tool is a time- and resource-intensive task, however, most databases use their own embedded viewers and new databases continue to develop their own viewers. We present SpeckTackle, a custom-tailored JavaScript charting library for spectroscopy in life sciences. SpeckTackle is cross-browser compatible and easy to integrate into existing resources, as we demonstrate for the MetaboLights database. Its default chart types cover common visualisation tasks following the de facto 'look and feel' standards for spectra visualisation. SpeckTackle is released under GNU LGPL to encourage uptake and reuse within the community. The latest version of the library including examples and documentation on how to use and extend the library with additional chart types is available online in its public repository.

  6. 46 CFR Appendix A to Part 501 - Federal Maritime Commission Organization Chart

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 9 2010-10-01 2010-10-01 false Federal Maritime Commission Organization Chart A Appendix A to Part 501 Shipping FEDERAL MARITIME COMMISSION GENERAL AND ADMINISTRATIVE PROVISIONS THE... Organization Chart ER03JN10.006 ...

  7. 56-Day Complete Set of all of the Digital Enroute Charts - Aeronautical Information Services Digital Products

    Data.gov (United States)

    Department of Transportation — The following ZIP files contain all of the Digital Enroute charts, except for Caribbean charts, for a given effective date range. Due to the large file sizes, it is...

  8. Transition between trickle flow and pulse flow in a cocurrent gas-liquid trickle-bed reactor at elevated pressures

    NARCIS (Netherlands)

    Wammes, W.J.A.; Mechielsen, S.J.; Westerterp, K.R.

    1992-01-01

    The effect of reactor pressure in the range of 0.2–2.0 MPa on the transition between the trickle-flow and the pulse-flow regime has been investigated for the non-foaming water—nitrogen and aqueous 40% ethyleneglycol—nitrogen systems. Most models and flow charts which are all based on atmospheric

  9. Comparison of control charts for monitoring clinical performance using binary data.

    Science.gov (United States)

    Neuburger, Jenny; Walker, Kate; Sherlaw-Johnson, Chris; van der Meulen, Jan; Cromwell, David A

    2017-11-01

    Time series charts are increasingly used by clinical teams to monitor their performance, but statistical control charts are not widely used, partly due to uncertainty about which chart to use. Although there is a large literature on methods, there are few systematic comparisons of charts for detecting changes in rates of binary clinical performance data. We compared four control charts for binary data: the Shewhart p-chart; the exponentially weighted moving average (EWMA) chart; the cumulative sum (CUSUM) chart; and the g-chart. Charts were set up to have the same long-term false signal rate. Chart performance was then judged according to the expected number of patients treated until a change in rate was detected. For large absolute increases in rates (>10%), the Shewhart p-chart and EWMA both had good performance, although not quite as good as the CUSUM. For small absolute increases (chart is designed to efficiently detect decreases in low event rates, but it again had less good performance than the CUSUM. The Shewhart p-chart is the simplest chart to implement and interpret, and performs well for detecting large changes, which may be useful for monitoring processes of care. The g-chart is a useful complement for determining the success of initiatives to reduce low-event rates (eg, adverse events). The CUSUM may be particularly useful for faster detection of problems with patient safety leading to increases in adverse event rates.  . © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  10. On the Use of the K-Chart for Phase II Monitoring of Simple Linear Profiles

    OpenAIRE

    Gani, Walid; Limam, Mohamed

    2013-01-01

    Control charts for monitoring linear profiles are used to control quality processes which are characterized by a relationship between a response variable and one or more explanatory variables. In the literature, the majority of control charts deal with phase II analysis of linear profiles, where the objective is to assess the performance of control charts in detecting shifts in the parameters of linear profiles. Recently, the kernel distance-based multivariate control chart, also known as the...

  11. Pre-processing data using wavelet transform and PCA based on support vector regression and gene expression programming for river flow simulation

    Science.gov (United States)

    Solgi, Abazar; Pourhaghi, Amir; Bahmani, Ramin; Zarei, Heidar

    2017-07-01

    An accurate estimation of flow using different models is an issue for water resource researchers. In this study, support vector regression (SVR) and gene expression programming (GEP) models in daily and monthly scale were used in order to simulate Gamasiyab River flow in Nahavand, Iran. The results showed that although the performance of models in daily scale was acceptable and the result of SVR model was a little better, their performance in the daily scale was really better than the monthly scale. Therefore, wavelet transform was used and the main signal of every input was decomposed. Then, by using principal component analysis method, important sub-signals were recognized and used as inputs for the SVR and GEP models to produce wavelet-support vector regression (WSVR) and wavelet-gene expression programming. The results showed that the performance of WSVR was better than the SVR in such a way that the combination of SVR with wavelet could improve the determination coefficient of the model up to 3% and 18% for daily and monthly scales, respectively. Totally, it can be said that the combination of wavelet with SVR is a suitable tool for the prediction of Gamasiyab River flow in both daily and monthly scales.

  12. Time contour expression of limited range phenomena on stack chart; Jugo chart jo deno kyokuchi gensho jikan contour

    Energy Technology Data Exchange (ETDEWEB)

    Kametani, T.

    1997-05-27

    Time contour expression of limited range phenomena on stack chart is examined for further improvement on the result of the ultimate interpretation in the seismic reflection survey. The policy is made clear from the beginning that local phenomena are to be discussed, and data prior CMP stacking is interpreted in detail. For this purpose, it is effective to make use of the time contour expression in the midpoint-offset plane simultaneously with the CMP and COP panels. For the review of data prior to CMP stacking, it is convenient to use the CMP (CDP) stacking chart in which the data is arranged methodically. In this chart, all the channels which are crude data prior to stacking are plotted on midpoint-offset coordinates, which plane is called the MOD (Midpoint Offset Domain) panel. Various panels can be chosen unrestrictedly, and their mutual relations can be easily grasped. When data points are given a time axis, they can be expressed in a time contour. Studies are conducted about the underground structure, multiple reflection paths divided by it, and characteristics of detour reflection attributable to faults. 4 refs., 9 figs.

  13. Validation of life-charts documented with the personal life-chart app - a self-monitoring tool for bipolar disorder.

    Science.gov (United States)

    Schärer, Lars O; Krienke, Ute J; Graf, Sandra-Mareike; Meltzer, Katharina; Langosch, Jens M

    2015-03-14

    Long-term monitoring in bipolar affective disorders constitutes an important therapeutic and preventive method. The present study examines the validity of the Personal Life-Chart App (PLC App), in both German and in English. This App is based on the National Institute of Mental Health's Life-Chart Method, the de facto standard for long-term monitoring in the treatment of bipolar disorders. Methods have largely been replicated from 2 previous Life-Chart studies. The participants documented Life-Charts with the PLC App on a daily basis. Clinicians assessed manic and depressive symptoms in clinical interviews using the Inventory of Depressive Symptomatology, clinician-rated (IDS-C) and the Young Mania Rating Scale (YMRS) on a monthly basis on average. Spearman correlations of the total scores of IDS-C and YMRS were calculated with both the Life-Chart functional impairment rating and mood rating documented with the PLC App. 44 subjects used the PLC App in German and 10 subjects used the PLC App in English. 118 clinical interviews from the German sub-sample and 97 from the English sub-sample were analysed separately. The results in both sub-samples are similar to previous Life-Chart validation studies. Again statistically significant high correlations were found between the Life-Chart function rating assigned through the PLC App and well-established observer-rated methods. Again correlations were weaker for the Life-Chart mood rating than for the Life-Chart function impairment. No relevant correlation was found between the Life-chart mood rating and YMRS in the German sub-sample. This study gives further evidence for the validity of the Life-Chart method as a valid tool for the recognition of both manic and depressive episodes. Documenting Life-Charts with the PLC App (English and German) does not seem to impair the validity of patient ratings.

  14. 46 CFR 150.160 - Carrying a cargo as an exception to the compatibility chart.

    Science.gov (United States)

    2010-10-01

    ... chart. 150.160 Section 150.160 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN... compatibility chart. The Operator of a vessel having on board a cargo carried as an exception under § 150.150 but not listed in Appendix I, Exceptions to the Chart, shall make sure that: (a) The Commandant (G-MSO...

  15. 46 CFR Appendix III to Part 150 - Testing Procedures for Determining Exceptions to the Chart

    Science.gov (United States)

    2010-10-01

    ... Chart III Appendix III to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED... Procedures for Determining Exceptions to the Chart experimental procedure for evaluating binary chemical... is joined, while the other wire of each is connected to a strip-chart recorder. The thermocouple...

  16. Monitoring a PVC batch process with multivariate statistical process control charts

    NARCIS (Netherlands)

    Tates, A. A.; Louwerse, D. J.; Smilde, A. K.; Koot, G. L. M.; Berndt, H.

    1999-01-01

    Multivariate statistical process control charts (MSPC charts) are developed for the industrial batch production process of poly(vinyl chloride) (PVC). With these MSPC charts different types of abnormal batch behavior were detected on-line. With batch contribution plots, the probable causes of these

  17. Filled Radar Charts Should Not Be Used to Compare Social Indicators

    Science.gov (United States)

    Feldman, Roger

    2013-01-01

    The use of "radar charts" is an increasingly popular way to present spatial data in a visually interesting format. Some authors recommend using "filled radar charts" to compare the performance of observational units. Filled radar charts are not appropriate for such comparisons because the size of the area within the polygon is not invariant to the…

  18. Examining Teachers' Behavioral Management Charts: A Comparison of Class Dojo and Paper-Pencil Methods

    Science.gov (United States)

    Krach, S. Kathleen; McCreery, Michael P.; Rimel, Hillary

    2017-01-01

    Many teachers report using behavioral management charts in their classrooms as a means of managing student behaviors, but little is known about exactly what behaviors teachers are charting, or specifically how. Misunderstanding over how real-world teachers maintain behavioral charts may cause miscommunication between the teacher and the school…

  19. Three-Dimensional Nuclear Chart--Understanding Nuclear Physics and Nucleosynthesis in Stars

    Science.gov (United States)

    Koura, Hiroyuki

    2014-01-01

    Three-dimensional (3D) nuclear charts were created using toy blocks, which represent the atomic masses per nucleon number and the total half-lives for each nucleus in the entire region of the nuclear mass. The bulk properties of the nuclei can be easily understood by using these charts. Subsequently, these charts were used in outreach activities…

  20. Ground and flight test program of a Stokes-flow parachute: Packaging, deployment, and sounding rocket integration

    Science.gov (United States)

    Niederer, P. G.; Mihora, D. J.

    1972-01-01

    The current design and hardware components of the patented 14 sqm Stokes flow parachute are described. The Stokes-flow parachute is a canopy of open mesh material, which is kept deployed by braces. Because of the light weight of its mesh material, and the high drag on its mesh elements when they operate in the Stokes-flow flight regime, this parachute has an extremely low ballistic coefficient. It provides a stable aerodynamic platform superior to conventional nonporous billowed parachutes, is exceptionally packable, and is easily contained within the canister of the Sidewinder Arcas or the RDT and E rockets. Thus, it offers the potential for gathering more meteorological data, especially at high altitudes, than conventional billowed parachutes. Methods for packaging the parachute are also recommended. These methods include schemes for folding the canopy and for automatically releasing the pressurizing fluid as the packaged parachute unfolds.

  1. Factors Contributing to Discrepancy Between Visual Acuity Fractions Derived From a Snellen Chart and Letter Scores on the Early Treatment Diabetic Retinopathy Study Chart.

    Science.gov (United States)

    Chen, Fred K; Agelis, Lillian Evangelia; Peh, Khaik K; Teong, Joanne; Wong, Evan Norman Xi Ming

    2014-01-01

    To report factors influencing the relationship between visual acuity (VA) fractions measured on Snellen chart and letter scores on the Early Treatment Diabetic Retinopathy Study (ETDRS) chart. This was a retrospective review from a single ophthalmology outpatient clinic. All patients had routine consecutive VA testing in the right eye using a Snellen chart (1-6 m) and the ETDRS chart (4 m and/or 1 m), by the same optometrist, using a standardized testing protocol for each chart. Both acuity fractions and letter scores were converted to their equivalent logarithm of minimum angle of resolution (logMAR) for comparison. Multiple regression analysis was performed. A total of 237 patients with a wide range of ocular disease and VAs were enrolled. Mean age was 63 years (range, 18-95 years). Recorded VA (logMAR) was better on Snellen chart by a mean (95% limits of agreement) of -0.07 (-0.33 to +0.18, P chart. Visual acuity level and amblyopia contributed to a small portion (17%-26%) of the total variance in the difference between logMAR equivalents derived from the 2 charts. The discrepancy in VA derived from Snellen and ETDRS charts was nonuniform across VA range. This has implications on interpretation of published studies converting Snellen fractions to logMAR for analysis and reporting of VA outcomes.

  2. INEL BNCT Program

    Energy Technology Data Exchange (ETDEWEB)

    Ackermann, A.L. (ed.)

    1991-08-01

    This Bulletin presents a summary of accomplishments and highlights in the Idaho National Engineering Laboratory's (INEL) Boron Neutron Capture Therapy (BNCT) Program for August 1991. This bulletin includes information on the brain tumor and melanoma research programs, Power Burst Facility (PBF) technical support and modifications, PBF operations, and updates to the animal data charts.

  3. Measurements of size distribution and density of a pharmaceutical fat emulsion, using field-programmed sedimentation field-flow fractionation (SdFFF).

    Science.gov (United States)

    Levin, S; Klausner, E

    1995-08-01

    The main goal was to establish that sedimentation field-flow fractionation (SdFFF), operated with power based field programming, is effective in the characterization of a commercial emulsion, Medialipide. This emulsion is used clinically for total parenteral nutrition and it is consisted of a mixture of long-chain triglycerides (LCT, soybean oil) with medium-chain triglycerides (MCT) emulsified by phospholipids. Different field programming methods were used in the analysis to establish the limits of applicability of the technique. Identical size distribution profiles were obtained under various conditions of the analysis. The density of the droplets was determined by collecting fractions from the SdFFF eluting bands, and analyzing them by photon correlation spectroscopy. The value of density of the oil droplets was changed in the SdFFF data, until best agreement with the PCS values was achieved. The value of density corresponding to the best agreement was considered as the oil density, and it was closed to the weighted average value between soybean and MCT oils. Field programming extends the capabilities of sedimentation field-flow fractionation in handling and characterizing complex and delicate samples as Medialipide.

  4. Max control chart with adaptive sample sizes for jointly monitoring process mean and standard deviation

    OpenAIRE

    Ching Chun Huang

    2014-01-01

    This paper develops the two-state and three-state adaptive sample size control schemes based on the Max chart to simultaneously monitor the process mean and standard deviation. Since the Max chart is a single variables control chart where only one plotting statistic is needed, the design and operation of adaptive sample size schemes for this chart will be simpler than those for the joint [Xmacr ] and S charts. Three types of processes including on-target initial, off-target initial and steady...

  5. Chart Venture Partners' perspective on dual-use CBRNE technologies

    Science.gov (United States)

    Van Nice, C. S.; Gardner, P. J.

    2008-04-01

    Chart Venture Partners' (CVP) approach to investing in Chemical, Biological, Radiological, Nuclear, and Explosives (CBRNE) detection technologies can be best understood in the context of the unique partnership between the firm's two founding institutions. CVP was founded as a partnership between the Chart Group, a New York-based merchant banking and venture capital boutique, and InSitech Incorporated, a 501(c)(3) non-profit commercial partnership intermediary for the U.S. Army's Armament Research Development and Engineering Center (ARDEC) at Picatinny Arsenal in New Jersey. The partnership between Chart Group and Insitech has yielded a new investment model. Unlike most venture funds, CVP operates with a singular focus on early-stage defense and security technologies, with the important caveat that everything we invest in must also have dual-use application in large-scale commercial markets. CVP believes that early-stage CBRNE companies require five qualities to be viable investment candidates and successful start-up companies: Great Science, Strong IP Positions, Recognized Scientific Champions, Identified Dual-Use Market Pull, and "Real World" Technical Performance Data. When earlystage CBRNE companies decide to seek venture capital and pursue higher growth dual-use business models, we often find that certain issues arise that are not always fully contemplated at the outset, and that can create gaps between what the start-up companies are offering to investors and what those investors are seeking from their potential portfolio companies. These same issues can have significant positive or negative impact on shareholder value over time, depending on how they are managed. Specifically, startups should consider carefully their strategies related to business development, market positioning, government funding, and investment syndicate formation.

  6. Use of National and International Growth Charts for Studying Height in European Children: Development of Up-To-Date European Height-For-Age Charts

    Science.gov (United States)

    Bonthuis, Marjolein; van Stralen, Karlijn J.; Verrina, Enrico; Edefonti, Alberto; Molchanova, Elena A.; Hokken-Koelega, Anita C. S.; Schaefer, Franz; Jager, Kitty J.

    2012-01-01

    Background Growth charts based on data collected in different populations and time periods are key tools to assess children’s linear growth. We analyzed the impact of geographic factors and the secular trend on height-for-age charts currently used in European populations, developed up-to-date European growth charts, and studied the effect of using different charts in a sample of growth retarded children. Methods and Findings In an international survey we obtained 18 unique national height-for-age charts from 28 European countries and compared them with charts from the World Health Organization (WHO), Euro-Growth reference, and Centers of Disease Control and Prevention (CDC). As an example, we obtained height data from 3,534 children with end-stage renal disease (ESRD) from 13 countries via the ESPN/ERA-EDTA registry, a patient group generally suffering from growth retardation. National growth charts showed a clear secular trend in height (mean height increased on average 0.6 cm/decade) and a North-South height gradient in Europe. For countries without a recent (>1990) national growth chart novel European growth charts were constructed from Northern and Southern European reference populations, reflecting geographic height differences in mean final height of 3.9 cm in boys and 3.8 cm in girls. Mean height SDS of 2- to 17-year-old ESRD patients calculated from recent national or derived European growth charts (−1.91, 95% CI: −1.97 to −1.85) was significantly lower than when using CDC or WHO growth charts (−1.55, 95% CI: −1.61 to −1.49) (Pmonitoring growth of healthy and diseased European children. PMID:22916131

  7. Development of a single-phase harmonic power flow program to study the 20 kHz AC power system for large spacecraft

    Science.gov (United States)

    Kraft, L. Alan; Kankam, M. David

    1991-01-01

    The development of software is described to aid in design and analysis of AC power systems for large spacecraft. The algorithm is an important version of harmonic power flow program, HARMFLO, used for the study of AC power quality. The new program is applicable to three-phase systems typified by terrestrial power systems, and single-phase systems characteristic of space power systems. The modified HARMFLO accommodates system operating frequencies ranging from terrestrial 60 Hz to and beyond aerospace 20 kHz, and can handle both source and load-end harmonic distortions. Comparison of simulation and test results of a representative spacecraft power system shows a satisfactory correlation. Recommendations are made for the direction of future improvements to the software, to enhance its usefulness to power system designer and analysts.

  8. PRECONDITIONED CONJUGATE-GRADIENT 2 (PCG2), a computer program for solving ground-water flow equations

    Science.gov (United States)

    Hill, Mary C.

    1990-01-01

    This report documents PCG2 : a numerical code to be used with the U.S. Geological Survey modular three-dimensional, finite-difference, ground-water flow model . PCG2 uses the preconditioned conjugate-gradient method to solve the equations produced by the model for hydraulic head. Linear or nonlinear flow conditions may be simulated. PCG2 includes two reconditioning options : modified incomplete Cholesky preconditioning, which is efficient on scalar computers; and polynomial preconditioning, which requires less computer storage and, with modifications that depend on the computer used, is most efficient on vector computers . Convergence of the solver is determined using both head-change and residual criteria. Nonlinear problems are solved using Picard iterations. This documentation provides a description of the preconditioned conjugate gradient method and the two preconditioners, detailed instructions for linking PCG2 to the modular model, sample data inputs, a brief description of PCG2, and a FORTRAN listing.

  9. Use of National and International Growth Charts for Studying Height in European Children: Development of Up-To-Date European Height-For-Age Charts

    NARCIS (Netherlands)

    Bonthuis, Marjolein; van Stralen, Karlijn J.; Verrina, Enrico; Edefonti, Alberto; Molchanova, Elena A.; Hokken-Koelega, Anita C. S.; Schaefer, Franz; Jager, Kitty J.

    2012-01-01

    Background: Growth charts based on data collected in different populations and time periods are key tools to assess children's linear growth. We analyzed the impact of geographic factors and the secular trend on height-for-age charts currently used in European populations, developed up-to-date

  10. Use of national and international growth charts for studying height in european children: Development of up-to-date european height-for-age charts

    NARCIS (Netherlands)

    M. Bonthuis (Marjolein); K.J. van Stralen (Karlijn); E. Verrina (Enrico); A. Edefonti (Alberto); E.A. Molchanova (Elena); A.C.S. Hokken-Koelega (Anita); F. Schaefer (Franz); K.J. Jager (Kitty)

    2012-01-01

    textabstractBackground: Growth charts based on data collected in different populations and time periods are key tools to assess children's linear growth. We analyzed the impact of geographic factors and the secular trend on height-for-age charts currently used in European populations, developed

  11. Study on the Stochastic Chance-Constrained Fuzzy Programming Model and Algorithm for Wagon Flow Scheduling in Railway Bureau

    Directory of Open Access Journals (Sweden)

    Bin Liu

    2012-01-01

    Full Text Available The wagon flow scheduling plays a very important role in transportation activities in railway bureau. However, it is difficult to implement in the actual decision-making process of wagon flow scheduling that compiled under certain environment, because of the interferences of uncertain information, such as train arrival time, train classify time, train assemble time, and flexible train-size limitation. Based on existing research results, considering the stochasticity of all kinds of train operation time and fuzziness of train-size limitation of the departure train, aimed at maximizing the satisfaction of departure train-size limitation and minimizing the wagon residence time at railway station, a stochastic chance-constrained fuzzy multiobjective model for flexible wagon flow scheduling problem is established in this paper. Moreover, a hybrid intelligent algorithm based on ant colony optimization (ACO and genetic algorithm (GA is also provided to solve this model. Finally, the rationality and effectiveness of the model and algorithm are verified through a numerical example, and the results prove that the accuracy of the train work plan could be improved by the model and algorithm; consequently, it has a good robustness and operability.

  12. Use of national and international growth charts for studying height in European children: development of up-to-date European height-for-age charts.

    Directory of Open Access Journals (Sweden)

    Marjolein Bonthuis

    Full Text Available BACKGROUND: Growth charts based on data collected in different populations and time periods are key tools to assess children's linear growth. We analyzed the impact of geographic factors and the secular trend on height-for-age charts currently used in European populations, developed up-to-date European growth charts, and studied the effect of using different charts in a sample of growth retarded children. METHODS AND FINDINGS: In an international survey we obtained 18 unique national height-for-age charts from 28 European countries and compared them with charts from the World Health Organization (WHO, Euro-Growth reference, and Centers of Disease Control and Prevention (CDC. As an example, we obtained height data from 3,534 children with end-stage renal disease (ESRD from 13 countries via the ESPN/ERA-EDTA registry, a patient group generally suffering from growth retardation. National growth charts showed a clear secular trend in height (mean height increased on average 0.6 cm/decade and a North-South height gradient in Europe. For countries without a recent (>1990 national growth chart novel European growth charts were constructed from Northern and Southern European reference populations, reflecting geographic height differences in mean final height of 3.9 cm in boys and 3.8 cm in girls. Mean height SDS of 2- to 17-year-old ESRD patients calculated from recent national or derived European growth charts (-1.91, 95% CI: -1.97 to -1.85 was significantly lower than when using CDC or WHO growth charts (-1.55, 95% CI: -1.61 to -1.49 (P<0.0001. CONCLUSION: Differences between height-for-age charts may reflect true population differences, but are also strongly affected by the secular trend in height. The choice of reference charts substantially affects the clinical decision whether a child is considered short-for-age. Therefore, we advocate using recent national or European height-for-age charts derived from recent national data when monitoring growth

  13. Use of national and international growth charts for studying height in European children: development of up-to-date European height-for-age charts.

    Science.gov (United States)

    Bonthuis, Marjolein; van Stralen, Karlijn J; Verrina, Enrico; Edefonti, Alberto; Molchanova, Elena A; Hokken-Koelega, Anita C S; Schaefer, Franz; Jager, Kitty J

    2012-01-01

    Growth charts based on data collected in different populations and time periods are key tools to assess children's linear growth. We analyzed the impact of geographic factors and the secular trend on height-for-age charts currently used in European populations, developed up-to-date European growth charts, and studied the effect of using different charts in a sample of growth retarded children. In an international survey we obtained 18 unique national height-for-age charts from 28 European countries and compared them with charts from the World Health Organization (WHO), Euro-Growth reference, and Centers of Disease Control and Prevention (CDC). As an example, we obtained height data from 3,534 children with end-stage renal disease (ESRD) from 13 countries via the ESPN/ERA-EDTA registry, a patient group generally suffering from growth retardation. National growth charts showed a clear secular trend in height (mean height increased on average 0.6 cm/decade) and a North-South height gradient in Europe. For countries without a recent (>1990) national growth chart novel European growth charts were constructed from Northern and Southern European reference populations, reflecting geographic height differences in mean final height of 3.9 cm in boys and 3.8 cm in girls. Mean height SDS of 2- to 17-year-old ESRD patients calculated from recent national or derived European growth charts (-1.91, 95% CI: -1.97 to -1.85) was significantly lower than when using CDC or WHO growth charts (-1.55, 95% CI: -1.61 to -1.49) (Pheight-for-age charts may reflect true population differences, but are also strongly affected by the secular trend in height. The choice of reference charts substantially affects the clinical decision whether a child is considered short-for-age. Therefore, we advocate using recent national or European height-for-age charts derived from recent national data when monitoring growth of healthy and diseased European children.

  14. Chronic heart failure in Japan: Implications of the CHART studies

    Directory of Open Access Journals (Sweden)

    Nobuyuki Shiba

    2008-02-01

    Full Text Available Nobuyuki Shiba, Hiroaki ShimokawaDepartment of Cardiovascular Medicine, Department of Evidence-Based Cardiovascular Medicine, Tohoku University Graduate School of Medicine, Sendai City, JapanAbstract: The prognosis of patients with chronic heart failure (CHF still remains poor, despite the recent advances in medical and surgical treatment. Furthermore, CHF is a major public health problem in most industrialized countries where the elderly population is rapidly increasing. Although the prevalence and mortality of CHF used to be relatively low in Japan, the disorder has been markedly increasing due to the rapid aging of the society and the Westernization of lifestyle that facilitates the development of coronary artery disease. The Chronic Heart Failure Analysis and Registry in the Tohoku District (CHART-1 study was one of the largest cohorts in Japan. The study has clarified the characteristics and prognosis of Japanese patients with CHF, demonstrating that their prognosis was similarly poor compared with those in Western countries. However, we still need evidence for the prevention and treatment of CHF based on the large cohort studies or randomized treatment trials in the Japanese population. Since the strategy for CHF management is now changing from treatment to prevention, a larger-size prospective cohort, called the CHART-2 study, has been initiated to evaluate the risk factors of CHF in Japan. This review summarizes the current status of CHF studies in Japan and discusses their future perspectives.Keywords: heart failure, aging, Japanese

  15. Nuclide Guide and International Chart of Nuclides - 2008

    Science.gov (United States)

    Golashvili, T.

    2009-08-01

    New versions of Nuclide Guide and Chart of the Nuclides were developed as a result of Russian-Chinese collaboration. The Nuclide Guide contains the basic information on more than 3000 radioactive and stable nuclides. The characteristics of isomers with half-lives more than 1 ms are included. For each nuclide spin, parity, mass of nuclide, magnetic moment (if available), mass excess, half-life or abundance, decay modes, branching ratios, emitted particles, energies of most intense gamma-rays and their intensities, decay energies and mean values of radiation energy per decay are given. For stable and natural long-lived nuclides cross-sections of thermal neutron induced activation are indicated. The information presented in the Guide was compiled from 5 sources: 1) ENSDF-2008, 2) atomic mass evaluation-2005 by Audi and Wapstra, 3) interactive data bases at web-sites , , 4) original evaluations of authors, 5) recent publications. The International Chart ot Nuclides was developed on the basis of information presented in Nuclide Guide.

  16. Development of a Fetal Weight Chart Using Serial Trans-Abdominal Ultrasound in an East African Population

    DEFF Research Database (Denmark)

    Schmiegelow, Christentze; Scheike, Thomas; Oesterholt, Mayke

    2012-01-01

    Objective: To produce a fetal weight chart representative of a Tanzanian population, and compare it to weight charts from Sub-Saharan Africa and the developed world. Methods: A longitudinal observational study in Northeastern Tanzania. Pregnant women were followed throughout pregnancy with serial...... trans-abdominal ultrasound. All pregnancies with pathology were excluded and a chart representing the optimal growth potential was developed using fetal weights and birth weights. The weight chart was compared to a chart from Congo, a chart representing a white population, and a chart representing...... a white population but adapted to the study population. The prevalence of SGA was assessed using all four charts. Results: A total of 2193 weight measurements from 583 fetuses/newborns were included in the fetal weight chart. Our chart had lower percentiles than all the other charts. Most importantly...

  17. Monitoring severe pre-eclampsia and eclampsia treatment in resource poor countries: skilled birth attendant perception of a new treatment and monitoring chart (LIVKAN chart).

    Science.gov (United States)

    Ameh, Charles A; Ekechi, Christine I; Tukur, Jamilu

    2012-07-01

    The lack of easy to use protocols and monitoring charts in the management of pre-eclampsia/eclampsia contribute to substandard care of women in resource poor settings. A treatment monitoring tool (LIVKAN chart) has been developed to improve the quality of care for these women. Based on feedback from skilled birth attendants (SBAs), a two page document which provides a visual record of the treatment and monitoring of women with severe pre-eclampsia/eclampsia over a 24 h period was developed. It also contains detailed treatment guidelines as well as a summary of the woman's treatment. A two page document on instructions for use of the chart was also developed. The chart design was evaluated by different level SBAs via a semi structured questionnaire. There was a 92% (109) response rate. About 30% (33) and 58% (63) of the respondents provided care to women in Primary Health Care and referral health care facilities respectively. Ninety eight percentage of respondents indicated that the chart would be of additional benefit in their care of women with pre-eclamptic/eclampsia. Seventy three percentage of respondents indicated that the chart would also be useful to lower health care facility SBAs. The design of the chart ensures that guidelines for managing/monitoring of patients are instantly available on a concise easy-to-use chart which confers added advantage over other chart designs. Having been evaluated by SBAs, acceptability and utilization in poor resource settings should be high. A study has been designed to evaluate the acceptability and effectiveness of this new monitoring chart in both BEOCs and CEOCs in two sub-Saharan African countries.

  18. [Application of quality control chart in quality control for nosocomial infection in intensive care unit].

    Science.gov (United States)

    Cheng, Yumei; Liu, Yuanyi; Wang, Difen

    2017-02-01

    controlled state. By using the control chart, the situation of nosocomial infections were analyzed scientifically and intuitively, the existing problems were discussed in time, the improvement programs were made, and the three catheter-associated infections were in a controlled state. Control chart has the characteristics of simple operation, intuitive results, and finding problems on time, so it can be used in daily monitoring of nosocomial infection and is worthy of generalization.

  19. OpenFlow cookbook

    CERN Document Server

    Smiler S, Kingston

    2015-01-01

    This book is intended for network protocol developers, SDN controller application developers, and academics who would like to understand and develop their own OpenFlow switch or OpenFlow controller in any programming language. With basic understanding of OpenFlow and its components, you will be able to follow the recipes in this book.

  20. Improving Dementia Health Literacy Using the FLOW Mnemonic: Pilot Findings from the Old SCHOOL Hip-Hop Program

    Science.gov (United States)

    Noble, James M.; Hedmann, Monique G.; Williams, Olajide

    2015-01-01

    Background: Dementia health literacy is low among the public and likely poses a significant barrier to Alzheimer's disease (AD) symptom recognition and treatment, particularly among minority populations already facing higher AD burden. We evaluated the pilot phase of a novel AD health education program, Old SCHOOL (Seniors Can Have Optimal…