Magnetic and electronic properties of Cu1-xFexO from first principles calculations

KAUST Repository

Yang, Hua; Cheng, Yingchun; Chen, Guifeng; Mi, Wenbo; Bai, Haili

2013-01-01

Magnetic and electronic properties of Cu1-xFexO systems with x = 6.25% and 12.5% have been investigated using first principles calculations. The ground state of CuO is an antiferromagnetic insulator. At x = 6.25%, Cu1-xFexO systems with Fe on 2 and 4 substitution positions are half-metallic due to the strong hybridization among Fe, the nearest O and Cu atoms, which may come from the double exchange coupling between Fe2+-O2--Cu2+. At x = 12.5%, Cu 1-xFexO system with Fe on 9-11 position has a strong spin polarization near the Fermi level and the system energy is lowest when the doped two Fe atoms form ferromagnetic configuration. This indicates the two doped Fe atoms prefer to form ferromagnetic configuration in Fe2+-O 2--Cu2+-O2--Fe2+ chains. While in the Fe on 7-11 position, the spin-down Fe-11 3d states have a large spin polarization near the Fermi level when the two doped Fe atoms form antiferromagnetic configuration. It is concluded that the transition metal doping can modify the magnetism and electronic structures of Cu 1-xFexO systems. This journal is © The Royal Society of Chemistry 2013.

Barge mounter ISER [intrinsically safe and economical reactor

International Nuclear Information System (INIS)

Kuwahara, Shin-ichi

1985-01-01

A forum in Japan has developed a new nuclear power plant ISER, a modified version of PIUS. ISER employs a conventional steel pressure vessel instead of PCRV used in the PIUS, thus allows the barge-mounted plant. This document introduces the concept of the barge-mounted ISER with its construction and siting

Balanced and sparse Tamo-Barg codes

KAUST Repository

Halbawi, Wael

2017-08-29

We construct balanced and sparse generator matrices for Tamo and Barg\\'s Locally Recoverable Codes (LRCs). More specifically, for a cyclic Tamo-Barg code of length n, dimension k and locality r, we show how to deterministically construct a generator matrix where the number of nonzeros in any two columns differs by at most one, and where the weight of every row is d + r - 1, where d is the minimum distance of the code. Since LRCs are designed mainly for distributed storage systems, the results presented in this work provide a computationally balanced and efficient encoding scheme for these codes. The balanced property ensures that the computational effort exerted by any storage node is essentially the same, whilst the sparse property ensures that this effort is minimal. The work presented in this paper extends a similar result previously established for Reed-Solomon (RS) codes, where it is now known that any cyclic RS code possesses a generator matrix that is balanced as described, but is sparsest, meaning that each row has d nonzeros.

Studies on the valence electronic structure of Fe and Ni in FexNi1−x ...

Indian Academy of Sciences (India)

structure of Fe and Ni in various Fex Ni1−x alloys. Since Kβ-to-Kα X-ray intensity ratio has been reported [2–7] to be a sensitive physical parameter to investigate the changes in the valence electronic structure of 3d-transition metals [2], we have undertaken the study of the valence electronic structure of Fe and Ni in the Fex ...

75 FR 13645 - Inventory of U.S.-Flag Launch Barges

Science.gov (United States)

2010-03-22

... Qualified Launch Barges, the Interim Final Rule requires that the Maritime Administration publish a notice... DEPARTMENT OF TRANSPORTATION Maritime Administration [Docket No. MARAD-2010 0023] Inventory of U.S.-Flag Launch Barges AGENCY: Maritime Administration, Department of Transportation. ACTION: Inventory of...

Spin-wave stiffness in the Dzyaloshinskii-Moriya helimagnets Mn1 -xFexSi

Science.gov (United States)

Grigoriev, S. V.; Altynbaev, E. V.; Siegfried, S.-A.; Pschenichnyi, K. A.; Menzel, D.; Heinemann, A.; Chaboussant, G.

2018-01-01

The small-angle neutron scattering is used to measure the spin-wave stiffness in the field-polarized state of the Dzyaloshinskii-Moriya helimagnets Mn1 -xFexSi with x =0.03 , 0.06, 0.09, and 0.10. The Mn1 -xFexSi compounds are helically ordered below Tc and show a helical fluctuation regime above Tc in a wide range up to TDM. The critical temperatures Tc and TDM decrease with x and tend to 0 at x =0.11 and 0.17, respectively. We have found that the spin-wave stiffness A change weakly with temperature for each individual Fe-doped compound. On the other hand, the spin-wave stiffness A decreases with x duplicating the TDM dependence on x , rather than Tc(x ) . These findings classify the thermal phase transition in all Mn1 -xFexSi compounds as an abrupt change in the spin state caused, most probably, by the features of an electronic band structure. Moreover, the criticality in these compounds is not related to the value of the ferromagnetic interaction but demonstrates the remarkable role of the Dzyaloshinskii-Moriya interaction as a factor destabilizing the magnetic order.

gFEX, the ATLAS Calorimeter Level-1 Real Time Processor

CERN Document Server

AUTHOR|(SzGeCERN)759889; The ATLAS collaboration; Begel, Michael; Chen, Hucheng; Lanni, Francesco; Takai, Helio; Wu, Weihao

2016-01-01

The global feature extractor (gFEX) is a component of the Level-1 Calorimeter trigger Phase-I upgrade for the ATLAS experiment. It is intended to identify patterns of energy associated with the hadronic decays of high momentum Higgs, W, & Z bosons, top quarks, and exotic particles in real time at the LHC crossing rate. The single processor board will be packaged in an Advanced Telecommunications Computing Architecture (ATCA) module and implemented as a fast reconfigurable processor based on three Xilinx Vertex Ultra-scale FPGAs. The board will receive coarse-granularity information from all the ATLAS calorimeters on 276 optical fibers with the data transferred at the 40 MHz Large Hadron Collider (LHC) clock frequency. The gFEX will be controlled by a single system-on-chip processor, ZYNQ, that will be used to configure all the processor Field-Programmable Gate Array (FPGAs), monitor board health, and interface to external signals. Now, the pre-prototype board which includes one ZYNQ and one Vertex-7 FPGA ...

gFEX, the ATLAS Calorimeter Level 1 Real Time Processor

CERN Document Server

Tang, Shaochun; The ATLAS collaboration

2015-01-01

The global feature extractor (gFEX) is a component of the Level-1Calorimeter trigger Phase-I upgrade for the ATLAS experiment. It is intended to identify patterns of energy associated with the hadronic decays of high momentum Higgs, W, & Z bosons, top quarks, and exotic particles in real time at the LHC crossing rate. The single processor board will be packaged in an Advanced Telecommunications Computing Architecture (ATCA) module and implemented as a fast reconfigurable processor based on three Xilinx Ultra-scale FPGAs. The board will receive coarse-granularity information from all the ATLAS calorimeters on 264 optical fibers with the data transferred at the 40 MHz LHC clock frequency. The gFEX will be controlled by a single system-on-chip processor, ZYNQ, that will be used to configure all the processor FPGAs, monitor board health, and interface to external signals. Now, the pre-prototype board which includes one ZYNQ and one Vertex-7 FPGA has been designed for testing and verification. The performance ...

Fe induced optical limiting properties of Zn1-xFexS nanospheres

Science.gov (United States)

Vineeshkumar, T. V.; Raj, D. Rithesh; Prasanth, S.; Unnikrishnan, N. V.; Mahadevan Pillai, V. P.; Sudarasanakumar, C.

2018-02-01

Zn1-xFexS (x = 0.00, 0.01, 0.03, 0.05) nanospheres were synthesized by polyethylene glycol assisted hydrothermal method. XRD studies revealed that samples of all concentrations exhibited cubic structure with crystallite grain size 7-9 nm. TEM and SEM show the formation of nanospheres by dense aggregation of smaller particles. Increasing Zn/Fe ratio tune the band gap from 3.4 to 3.2 eV and also quenches the green luminescence. FTIR spectra reveal the presence of capping agent, intensity variation and shifting of LO and TO phonon modes confirm the presence of Fe ions. Nonlinear optical properties were measured using open and closed aperture z-scan techniques, employing frequency doubled 532 nm pumping sources which indicated reverse saturable absorption (RSA) process. The nonlinear optical coefficients are obtained by two photon absorption (2PA). Composition dependent nonlinear optical coefficients ;β;, nonlinear refractive index, third order susceptibility and optical limiting threshold were estimated. The sample shows good nonlinear absorption and enhancement of optical limiting behavior with increasing Fe volume fraction. Contribution of RSA on optical nonlinearity of Zn1-xFexS nanospheres are also investigated using three different input energies. Zn1-xFexS with comparatively small limiting threshold value is a promising candidate for optical power limiting applications.

Entrainment, retention, and transport of freely swimming fish in junction gaps between commercial barges operating on the Illinois Waterway

Science.gov (United States)

Davis, Jeremiah J.; Jackson, P. Ryan; Engel, Frank; LeRoy, Jessica Z.; Neeley, Rebecca N.; Finney, Samuel T.; Murphy, Elizabeth A.

2016-01-01

Large Electric Dispersal Barriers were constructed in the Chicago Sanitary and Ship Canal (CSSC) to prevent the transfer of invasive fish species between the Mississippi River Basin and the Great Lakes Basin while simultaneously allowing the passage of commercial barge traffic. We investigated the potential for entrainment, retention, and transport of freely swimming fish within large gaps (> 50 m3) created at junction points between barges. Modified mark and capture trials were employed to assess fish entrainment, retention, and transport by barge tows. A multi-beam sonar system enabled estimation of fish abundance within barge junction gaps. Barges were also instrumented with acoustic Doppler velocity meters to map the velocity distribution in the water surrounding the barge and in the gap formed at the junction of two barges. Results indicate that the water inside the gap can move upstream with a barge tow at speeds near the barge tow travel speed. Water within 1 m to the side of the barge junction gaps was observed to move upstream with the barge tow. Observed transverse and vertical water velocities suggest pathways by which fish may potentially be entrained into barge junction gaps. Results of mark and capture trials provide direct evidence that small fish can become entrained by barges, retained within junction gaps, and transported over distances of at least 15.5 km. Fish entrained within the barge junction gap were retained in that space as the barge tow transited through locks and the Electric Dispersal Barriers, which would be expected to impede fish movement upstream.

Barged/In-river steelhead migrant data - Evaluation of methods to reduce straying rates of barged juvenile steelhead

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The goals of this study are to develop methods to reduce wandering and straying of steelhead (Oncorhynchus mykiss) that are collected and barged from the Snake River...

33 CFR 163.05 - Tows of seagoing barges within inland waters.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Tows of seagoing barges within inland waters. 163.05 Section 163.05 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND... inland waters. (a) The tows of seagoing barges when navigating the inland waters of the United States...

Babcock and Wilcox BR-100 100-ton rail/barge spent fuel shipping cask

International Nuclear Information System (INIS)

1990-02-01

This Preliminary Design Report (PDR) provides a detailed description of the design, analyses, and testing programs for the BR-100 cask. The BR-100 is a Type B(U) cask designed for transport by rail or barge. This report presents the preliminary analyses and tests which have been performed for the BR-100 and outlines the confirmatory analyses and tests which will be performed

Homogeneous and Heterogeneous (Fex, Cr1-x)(OH)3 Precipitation: Implications for Cr Sequestration.

Science.gov (United States)

Dai, Chong; Zuo, Xiaobing; Cao, Bo; Hu, Yandi

2016-02-16

The formation of (Fe, Cr)(OH)3 nanoparticles determines the fate of aqueous Cr in many aquatic environments. Using small-angle X-ray scattering, precipitation rates of (Fe, Cr)(OH)3 nanoparticles in solution and on quartz were quantified from 0.1 mM Fe(III) solutions containing 0-0.25 mM Cr(III) at pH = 3.7 ± 0.2. Concentration ratio of aqueous Cr(III)/Fe(III) controlled the chemical composition (x) of (Fex, Cr1-x)(OH)3 precipitates, solutions' supersaturation with respect to precipitates, and the surface charge of quartz. Therefore, the aqueous Cr(III)/Fe(III) ratio affected homogeneous (in solution) and heterogeneous (on quartz) precipitation rates of (Fex, Cr1-x)(OH)3 through different mechanisms. The sequestration mechanisms of Cr(III) in precipitates were also investigated. In solutions with high aqueous Cr(III)/Fe(III) ratios, surface enrichment of Cr(III) on the precipitates occurred, resulting in slower particle growth in solutions. From solutions with 0-0.1 mM Cr(III), the particles on quartz grew from 2 to 4 nm within 1 h. Interestingly, from solution with 0.25 mM Cr(III), particles of two distinct sizes (2 and 6 nm) formed on quartz, and their sizes remained unchanged throughout the reaction. Our study provided new insights on homogeneous and heterogeneous precipitation of (Fex, Cr1-x)(OH)3 nanoparticles, which can help determine the fate of Cr in aquatic environments.

1-Bromoethene-1-sulfonyl fluoride (BESF) is another good connective hub for SuFEx click chemistry.

Science.gov (United States)

Smedley, Christopher J; Giel, Marie-Claire; Molino, Andrew; Barrow, Andrew S; Wilson, David J D; Moses, John E

2018-05-25

We demonstrate 1,2-dibromoethane-1-sulfonyl fluoride (DESF) as a bench-stable and readily accessible precursor to the robust SuFEx connector, 1-bromoethene-1-sulfonyl fluoride (BESF). The in situ generation of BESF from DESF opens up several new reaction profiles, including application in the syntheses of unprecedented 3-substituted isoxazole-5-sulfonyl fluorides, 1-substituted-1H-1,2,3-triazole-4-sulfonyl fluorides, 2-amino-1-bromoethane-1-sulfonyl fluorides and 4-bromo-β-sultams in good to excellent yields. These new modules comprise a pendant sulfonyl fluoride handle, which further undergoes facile and selective SuFEx reactions with a selection of aryl silyl ethers to generate stable and useful sulfonate connections.

49 CFR 176.174 - Transport of Class 1 (explosive) materials in shipborne barges.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Transport of Class 1 (explosive) materials in... REGULATIONS CARRIAGE BY VESSEL Detailed Requirements for Class 1 (Explosive) Materials Cargo Transport Units and Shipborne Barges § 176.174 Transport of Class 1 (explosive) materials in shipborne barges. (a...

46 CFR 13.301 - Original application for “Tankerman-PIC (Barge)” endorsement.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Original application for âTankerman-PIC (Barge)â endorsement. 13.301 Section 13.301 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE....301 Original application for “Tankerman-PIC (Barge)” endorsement. Each applicant for a “Tankerman-PIC...

Using service-time profiles for distributed planning of container barge rotations along terminals

NARCIS (Netherlands)

Douma, A.M.; Schuur, Peter; Schutten, Johannes M.J.

2008-01-01

We consider the barge rotation planning and quay scheduling problem in the Port of Rotterdam. This problem concerns the alignment of barge rotations and terminal quay schedules. We use a Multi-Agent based approach for the problem, since such a Multi-Agent based system can mirror to a large extent

Balanced and sparse Tamo-Barg codes

KAUST Repository

Halbawi, Wael; Duursma, Iwan; Dau, Hoang; Hassibi, Babak

2017-01-01

We construct balanced and sparse generator matrices for Tamo and Barg's Locally Recoverable Codes (LRCs). More specifically, for a cyclic Tamo-Barg code of length n, dimension k and locality r, we show how to deterministically construct a generator matrix where the number of nonzeros in any two columns differs by at most one, and where the weight of every row is d + r - 1, where d is the minimum distance of the code. Since LRCs are designed mainly for distributed storage systems, the results presented in this work provide a computationally balanced and efficient encoding scheme for these codes. The balanced property ensures that the computational effort exerted by any storage node is essentially the same, whilst the sparse property ensures that this effort is minimal. The work presented in this paper extends a similar result previously established for Reed-Solomon (RS) codes, where it is now known that any cyclic RS code possesses a generator matrix that is balanced as described, but is sparsest, meaning that each row has d nonzeros.

The development of Global Feature eXtractor (gFEX) - the ATLAS calorimeter Level 1 trigger for ATLAS at High Luminosity LHC

CERN Document Server

AUTHOR|(SzGeCERN)759889; The ATLAS collaboration; Begel, Michael; Chen, Hucheng; Chen, Kai; Lanni, Francesco; Takai, Helio; Wu, Weihao

2017-01-01

As part of the ATLAS Phase-I Upgrade, the gFEX is designed to help maintain the ATLAS Level-1 trigger acceptance rate with the increasing LHC luminosity. The gFEX identifies patterns of energy associated with the hadronic decays of high momentum Higgs, W, & Z bosons, top quarks, and exotic particles in real time at the 40MHz LHC bunch crossing rate. The prototype v1 and v2 were designed and fully tested in 2015 and 2016 respectively. A pre-production gFEX board has been manufactured, which is an ATCA module consisting of three UltraScale+ FPGAs and one ZYNQ UltraScale+, and 35 MiniPODs are implemented in an ATCA module. This board receives coarse-granularity (0.2x0.2) information from the entire ATLAS calorimeters on up to 300 optical fibers and 96 links to the L1Topo at the speed up to 12.8 Gb/s.

The structures of colour string for e+e- → qq-barg and υ → 3g

International Nuclear Information System (INIS)

Tian Lili; Xie Qubing; Si Zongguo

1993-01-01

In Lund model, the explanation of e + e - → qq-barg → 3 jets and υ → 3g → h's is based on applying Lund string fragmentation model to their assumed structures of colour string for qq-barg and 3g systems. In this paper, starting from the colour wave functions of qq-barg and 3 g systems, we study these colour string structures by QCD directly. The results reveal the reasonableness and accuracy of Lund string pictures

Potential barge transportation for inbound corn and grain

Science.gov (United States)

1997-12-31

This research develops a model for estimating future barge and rail rates for decision making. The Box-Jenkins and the Regression Analysis with ARIMA errors forecasting methods were used to develop appropriate models for determining future rates. A s...

Development of the jet Feature EXtractor (jFEX) for the ATLAS Level 1 calorimeter trigger upgrade at the LHC

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00547698; The ATLAS collaboration; Brogna, Andrea Salvatore; Buescher, Volker; Degele, Reinhold; Herr, Holger; Kahra, Christian; Rave, Stefan; Rocco, Elena; Schaefer, Uli; Vieira De Souza, Julio; Tapprogge, Stefan; Bauss, Bruno

2017-01-01

To cope with the enhanced luminosity delivered by the Large Hadron Collider from 2021 onwards, the ATLAS experiment has planned several upgrades. The first level trigger based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature EXtractors (FEXs, FPGA-based trigger boards), each optimized to trigger on different physics objects. This contribution is focused on the jet FEX. The main challenges of such a board are the input bandwidth of up to 3.1 Tbps, dense routing of high-speed signals and power consumption. The design, PCB simulations and results of integrated tests of a prototype are shown in this document.

Synthesis and crystal structure determination of YCo1−xFexO3 (x ...

Indian Academy of Sciences (India)

FexO3 (x = 0, 0.33, 0.5, 0.67 and 1) perovskites are presented in this work. ..... calculated values for stress, strain, cell distortion and ... Yin X, Hong L and Liu Z-L 2006 Appl. Catal. A: ... Silva A M, Kong X, Parkin M C, Cammack R and Hider.

A static analysis method for barge impact design of bridges with consideration of dynamic amplification : summary.

Science.gov (United States)

2009-11-01

Several hundred Florida bridges span waterways deep enough for barge traffic. To ensure a bridge is capable of withstanding the potential impact of a barge collision, engineers use design specifications recommended by the American Association of Stat...

Coupled Loads Analysis of the Modified NASA Barge Pegasus and Space Launch System Hardware

Science.gov (United States)

Knight, J. Brent

2015-01-01

A Coupled Loads Analysis (CLA) has been performed for barge transport of Space Launch System hardware on the recently modified NASA barge Pegasus. The barge re-design was facilitated with detailed finite element analyses by the ARMY Corps of Engineers - Marine Design Center. The Finite Element Model (FEM) utilized in the design was also used in the subject CLA. The Pegasus FEM and CLA results are presented as well as a comparison of the analysis process to that of a payload being transported to space via the Space Shuttle. Discussion of the dynamic forcing functions is included as well. The process of performing a dynamic CLA of NASA hardware during marine transport is thought to be a first and can likely support minimization of undue conservatism.

33 CFR 157.460 - Additional operational requirements for tank barges.

Science.gov (United States)

2010-07-01

... OF HOMELAND SECURITY (CONTINUED) POLLUTION RULES FOR THE PROTECTION OF THE MARINE ENVIRONMENT... Hulls Carrying Petroleum Oils § 157.460 Additional operational requirements for tank barges. (a...

Selective and Orthogonal Post-Polymerization Modification using Sulfur(VI) Fluoride Exchange (SuFEx) and Copper-Catalyzed Azide–Alkyne Cycloaddition (CuAAC) Reactions

International Nuclear Information System (INIS)

Oakdale, James S.; Kwisnek, Luke; Fokin, Valery V.

2016-01-01

Functional polystyrenes and polyacrylamides, containing combinations of fluorosulfate, aromatic silyl ether, and azide side chains, were used as scaffolds to demonstrate the postpolymerization modification capabilities of sulfur(VI) fluoride exchange (SuFEx) and CuAAC chemistries. Fluorescent dyes bearing appropriate functional groups were sequentially attached to the backbone of the copolymers, quantitatively and selectively addressing their reactive partners. Furthermore, this combined SuFEx and CuAAC approach proved to be robust and versatile, allowing for a rare accomplishment: triple orthogonal functionalization of a copolymer under essentially ambient conditions without protecting groups.

Preliminary assessment of costs and risks of transporting spent fuel by barge

International Nuclear Information System (INIS)

Tobin, R.L.; Meshkov, N.K.; Jones, R.H.

1985-12-01

The purpose of this study is to analyze the costs and risks associated with transporting spent fuel by barge. The barge movements would be made in combination with rail movements to transport spent fuel from plants to a repository. For the purpose of this analysis, three candidate repository sites are analyzed: Yucca Mountain, Nevada, Deaf Smith, Texas, and Hanford, Washington. This report complements a report prepared by Sandia National Laboratories in 1984 that analyzes the costs and risks of transporting spent fuel by rail and by truck to nine candidate repository sites

Time and dose assessment of barge shipment and at-reactor handling of a CASTOR V/21 spent fuel storage cask

Energy Technology Data Exchange (ETDEWEB)

Hostick, C.J. (Pacific Northwest Lab., Richland, WA (United States)); Lavender, J.C. (Westinghouse Hanford Co., Richland, WA (United States)); Wakeman, B.H. (Virginia Electric and Power Co., Richmond, VA (United States))

1992-04-01

This report contains the results of a time/motion analysis and a radiation dose assessment made during the receipt from barge transport and the loading of CAst iron cask for Storage and Transport Of Radioactive material (CASTOR) V/21 storage casks with spent nuclear fuel at the Surry Power Station in Virginia during 1987. The study was a cooperative effort between Pacific Northwest Laboratory (PNL) and Virginia Electric and Power Company (Virginia Power), and was funded by the US Department of Energy (DOE) Transportation Program Office. In this study, cask handling activities were tracked at the Surry Power Station, tracing the transfer of the empty spent fuel storage cask from an ocean-going vessel to a barge for river transport through the activities required to place the loaded storage cask at an at-reactor storage location.

Design features of SMART for barge mounted application

International Nuclear Information System (INIS)

Doo-Jeong Lee; Ju-Hyeon Yoon; Ju-Pyung Kim; Jong-In Kim; Moon-Hee Chang

2000-01-01

SMART is an integral reactor of 330 MWt capacity with passive safety features being developed for a wide range of applications including the barge mounted co-generation plant. Its design strives to combine the firmly-established commercial reactor design with new advanced technologies. Thus the use of the industry proven KOFA (Korea Optimized Fuel Assembly) based nuclear fuels is pursued while such radically new technologies as self-pressurizing pressurizer, helical once-through steam generators, and advanced control concepts are being developed. The safety of SMART centers around enhancing the inherent safety characteristics of the reactor and salient features include low core power density, integral arrangement to eliminate large break loss of coolant accident, etc. The progression of emergency situations into accidents is prevented with a number of advanced engineered safety features such as Passive Residual Heat Removal System, Passive Emergency Core Cooling System, Safeguard Vessel, Passive Containment Over-pressure Protection. This paper presents the status of current SMART development, characteristics of SMART safety systems and the possibility of SMART application to barge mounted environment. (author)

Effectiveness of a Barge-Based Ballast Water Treatment System for Multi-Terminal Ports

Directory of Open Access Journals (Sweden)

Lovro Maglić

2015-10-01

Full Text Available The paper presents outcomes of the discrete event simulation of the ballast water management in a multi-terminal port. The simulation includes ship’s manoeuvring, cargo and ballast operations and a barge-based ballast water treatment system operating within all terminal areas. The barge-based ballast water treatment system is used by ships unable to use their own equipment, not equipped with an appropriate ballast treatment system or non-compliant with the Ballast Water Management (BWM Convention 2004 for whatever reason. The main goal is to estimate the productivity and cost effectiveness of such systems as an option to support ships not able to comply with the BWM Convention, once it enters into force. The model was built and tested in Arena simulation software. Process parameters are based on real traffic data for the port of Rijeka. The results indicate that barge-based ballast treatment facility will be heavily underutilized, and that such systems are cost-effective only in ports where large volumes of ballast water need to be delivered to shore treatment systems.

76 FR 20080 - Inventory of U.S.-Flag Launch Barges

Science.gov (United States)

2011-04-11

... Administration publish a notice in the Federal Register requesting that owners or operators (or potential owners... DEPARTMENT OF TRANSPORTATION Maritime Administration [Docket Number MARAD 2011 0030] Inventory of U.S.-Flag Launch Barges AGENCY: Maritime Administration, Department of Transportation. ACTION...

Mictomagnetic, ferromagnetic, and antiferromagnetic transitions in La(FexAl1–x)13 intermetallic compounds

NARCIS (Netherlands)

Palstra, T.T.M.; Nieuwenhuys, G.J.; Mydosh, J.A.; Buschow, K.H.J.

1985-01-01

Cubic La(FexAl1–x)13 intermetallic compounds can be stabilized with iron concentration x between 0.46 and 0.92 in the NaZn13-type structure (D23) with Fm3c (Oh6) space-group symmetry. Here the Fe-Fe coordination number can increase up to 12. At low x values, a mictomagnetic regime occurs with

Probing the random distribution of half-metallic Co2Mn1-xFexSi Heusler alloys

NARCIS (Netherlands)

Wurmehl, S.; Kohlhepp, J.T.; Swagten, H.J.M.; Koopmans, B.; Wójcik, M.; Balke, B.; Blum, C.G.F.; Ksenofontov, V.; Fecher, G.H.; Felser, C.

2007-01-01

Co2Mn1-xFexSi Heusler alloys crystallize in the L21 structure. This structure type requires random distribution of Mn and Fe in case of the mixed alloys. The spin echo nuclear magnetic resonance (NMR) technique probes the direct local environments of the active atoms and is thus able to resolve next

Yeast Fex1p Is a Constitutively Expressed Fluoride Channel with Functional Asymmetry of Its Two Homologous Domains*

Science.gov (United States)

Smith, Kathryn D.; Gordon, Patricia B.; Rivetta, Alberto; Allen, Kenneth E.; Berbasova, Tetyana; Slayman, Clifford; Strobel, Scott A.

2015-01-01

Fluoride is a ubiquitous environmental toxin with which all biological species must cope. A recently discovered family of fluoride export (FEX) proteins protects organisms from fluoride toxicity by removing it from the cell. We show here that FEX proteins in Saccharomyces cerevisiae function as ion channels that are selective for fluoride over chloride and that these proteins are constitutively expressed at the yeast plasma membrane. Continuous expression is in contrast to many other toxin exporters in yeast, and this, along with the fact that two nearly duplicate proteins are encoded in the yeast genome, suggests that the threat posed by fluoride ions is frequent and detrimental. Structurally, eukaryotic FEX proteins consist of two homologous four-transmembrane helix domains folded into an antiparallel dimer, where the orientation of the two domains is fixed by a single transmembrane linker helix. Using phylogenetic sequence conservation as a guide, we have identified several functionally important residues. There is substantial functional asymmetry in the effect of mutation at corresponding sites in the two domains. Specifically, mutations to residues in the C-terminal domain proved significantly more detrimental to function than did similar mutations in the N-terminal domain. Our data suggest particular residues that may be important to anion specificity, most notably the necessity of a positive charge near the end of TMH1 in the C-terminal domain. It is possible that a cationic charge at this location may create an electrostatic well for fluoride ions entering the channel from the cytoplasm. PMID:26055717

Room Temperature Tunable Multiferroic Properties in Sol-Gel-Derived Nanocrystalline Sr(Ti1−xFexO3−δ Thin Films

Directory of Open Access Journals (Sweden)

Yi-Guang Wang

2017-09-01

Full Text Available Sr(Ti1−xFexO3−δ (0 ≤ x ≤ 0.2 thin films were grown on Si(100 substrates with LaNiO3 buffer-layer by a sol-gel process. Influence of Fe substitution concentration on the structural, ferroelectric, and magnetic properties, as well as the leakage current behaviors of the Sr(Ti1−xFexO3−δ thin films, were investigated by using the X-ray diffractometer (XRD, atomic force microscopy (AFM, the ferroelectric test system, and the vibrating sample magnetometer (VSM. After substituting a small amount of Ti ion with Fe, highly enhanced ferroelectric properties were obtained successfully in SrTi0.9Ti0.1O3−δ thin films, with a double remanent polarization (2Pr of 1.56, 1.95, and 9.14 μC·cm−2, respectively, for the samples were annealed in air, oxygen, and nitrogen atmospheres. The leakage current densities of the Fe-doped SrTiO3 thin films are about 10−6–10−5 A·cm−2 at an applied electric field of 100 kV·cm−1, and the conduction mechanism of the thin film capacitors with various Fe concentrations has been analyzed. The ferromagnetic properties of the Sr(Ti1−xFexO3−δ thin films have been investigated, which can be correlated to the mixed valence ions and the effects of the grain boundary. The present results revealed the multiferroic nature of the Sr(Ti1−xFexO3−δ thin films. The effect of the annealing environment on the room temperature magnetic and ferroelectric properties of Sr(Ti0.9Fe0.1O3−δ thin films were also discussed in detail.

Time Domain Response Analysis of Barge Floater Supporting an Offshore Wind Turbine

Directory of Open Access Journals (Sweden)

A.C. Mayilvahanan

2011-12-01

Full Text Available Wind energy is a reliable source of sustainable power generation and has been an active area of research globally to economically harness the energy for human use. Reliable source of wind energy pushed the engineers to install wind turbines near and far off the coasts. In shallow water upto 100 m, fixed structures like tripods, jackets, monopiles and gravity base are functionally and economically feasible. In deep waters, a floating substructure can be more economical for offshore wind turbine. In this study a barge type floater of different aspect ratios from 0.4 to 1.0 is investigated for its performance under wave and wind loading. All these floaters were designed with a defined transverse metacentric height (GM equal to 1.0 m and the hydrodynamic analysis is carried out using WAMIT. The barge with aspect ratio B/L = 1.0 is found to have lowest pitch RAO. The time domain surge, heave and pitch response for this barge has been obtained using Integro-differential equation of motion and the statistical response characteristics are compared for two different cases of excitation namely, wave excitation alone and combined wave and wind excitation. Statistics of surge, heave and pitch responses are obtained for three different seas states and for two different wave heading angles.

An Advanced Control Technique for Floating Offshore Wind Turbines Based on More Compact Barge Platforms

Directory of Open Access Journals (Sweden)

Joannes Olondriz

2018-05-01

Full Text Available Hydrodynamic Floating Offshore Wind Turbine (FOWT platform specifications are typically dominated by seaworthiness and maximum operating platform-pitch angle-related requirements. However, such specifications directly impact the challenge posed by an FOWT in terms of control design. The conventional FOWT systems are typically based on large, heavy floating platforms, which are less likely to suffer from the negative damping effect caused by the excessive coupling between blade-pitch control and platform-pitch motion. An advanced control technique is presented here to increase system stability for barge type platforms. Such a technique mitigates platform-pitch motions and improves the generator speed regulation, while maintaining blade-pitch activity and reducing blade and tower loads. The NREL’s 5MW + ITI Energy barge reference model is taken as a basis for this work. Furthermore, the capabilities of the proposed controller for performing with a more compact and less hydrodynamically stable barge platform is analysed, with encouraging results.

High-temperature compressive creep behaviour of perovskite-type oxides SrTi1-xFexO3-δ

NARCIS (Netherlands)

ten Donkelaar, S.F.P.; Stournari, V.; Malzbender, J.; Nijmeijer, Arian; Bouwmeester, Henricus J.M.

2015-01-01

Compressive creep tests have been performed on mixed ionic-electronic conducting perovskite-type oxides SrTi1-xFexO3- (STF, x = 0.3, 0.5 and 0.7). Observed activation energies and stress exponents, at 800–1000 ◦C and in the stress range 10 100 MPa, indicate that the steady-state creep rate of STF

Heave motion prediction of a large barge in random seas by using artificial neural network

Science.gov (United States)

Lee, Hsiu Eik; Liew, Mohd Shahir; Zawawi, Noor Amila Wan Abdullah; Toloue, Iraj

2017-11-01

This paper describes the development of a multi-layer feed forward artificial neural network (ANN) to predict rigid heave body motions of a large catenary moored barge subjected to multi-directional irregular waves. The barge is idealized as a rigid plate of finite draft with planar dimensions 160m (length) and 100m (width) which is held on station using a six point chain catenary mooring in 50m water depth. Hydroelastic effects are neglected from the physical model as the chief intent of this study is focused on large plate rigid body hydrodynamics modelling using ANN. Even with this assumption, the computational requirements for time domain coupled hydrodynamic simulations of a moored floating body is considerably costly, particularly if a large number of simulations are required such as in the case of response based design (RBD) methods. As an alternative to time consuming numerical hydrodynamics, a regression-type ANN model has been developed for efficient prediction of the barge's heave responses to random waves from various directions. It was determined that a network comprising of 3 input features, 2 hidden layers with 5 neurons each and 1 output was sufficient to produce acceptable predictions within 0.02 mean squared error. By benchmarking results from the ANN with those generated by a fully coupled dynamic model in OrcaFlex, it is demonstrated that the ANN is capable of predicting the barge's heave responses with acceptable accuracy.

The Development of the Global Feature eXtractor (gFEX) for ATLAS Level 1 Calorimeter Trigger at the LHC

CERN Document Server

Tang, Shaochun; The ATLAS collaboration; Chen, Hucheng

2018-01-01

During the ATLAS Phase-I upgrade, the gFEX will be designed to maintain the trigger acceptance against the increasing luminosity for the ATLAS Level-1 calorimeter trigger system. The gFEX is designed to identify patterns of energy associated with the hadronic decays of high momentum Higgs, W, & Z bosons, top quarks, and exotic particles in real time at the LHC crossing rate. The prototype v1 and v2 have been designed and fully tested in 2015 and 2016 respectively. With the lessons learned, a pre-production board with three UltraScale+ FPGAs and one ZYNQ UltraScale+, and 35 MiniPODs are implemented in an ATCA module. This board will receive coarse-granularity (0.2x0.2) information from the entire ATLAS calorimeters on up to 300 optical fibers and each FPGA has 24 links to the L1Topo at the speed up to 12.8 Gb/s.

Module control of the jFEX for the ATLAS calorimeter trigger upgrade

Energy Technology Data Exchange (ETDEWEB)

Spreckels, Rouven; Degele, Reinhold; Schaefer, Ulrich; Tapprogge, Stefan [Johannes Gutenberg University of Mainz (Germany)

2016-07-01

The jFEX (jet Feature EXtractor) will identify jets and τ particles and calculate energy sums with the data received from electromagnetic and hadronic calorimeters by running its algorithms on multiple processor FPGAs. The firmware and configuration of these algorithms are provided by a single control FPGA accessed through a central Ethernet port. For reasons of flexibility this control FPGA is placed on a mezzanine card based on a hybrid SoC (System on Chip) combining an FPGA and a CPU inside a single chip with many interconnects in between. This talk presents the design of this mezzanine card and the usage of the hybrid SoC approach.

The Level-1 Calorimeter Global Feature Extractor (gFEX) Boosted Object Trigger for the Phase-I Upgrade of the ATLAS Experiment

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00235957; The ATLAS collaboration; Stark, Giordon; Miller, David

2016-01-01

The Global Feature Extractor (gFEX) module is a planned component of the Level 1 online trigger system for the ATLAS experiment planned for installation during the Phase I upgrade in 2018. This unique single electronics board with multiple high speed processors will receive coarse-granularity information from all the ATLAS calorimeters enabling the identification in real time of large-radius jets for capturing Lorentz-boosted objects such as top quarks, Higgs, $Z$ and $W$ bosons. The gFEX architecture also facilitates the calculation of global event variables such as missing transverse energy, centrality for heavy ion collisions, and event-by-event pile-up energy density. Details of the electronics architecture that provides these capabilities are presented, along with results of tests of the prototype systems now available. The status of the firmware algorithm design and implementation as well as monitoring capabilities are also presented.

Correlation between magnetostriction and magnetic structure in pseudobinary compounds Tb(Co1-xFex2

Directory of Open Access Journals (Sweden)

Yue Wang

2017-07-01

Full Text Available Giant low-field magnetostriction has been achieved in pseudobinary Laves phase compounds RR’T2 (R and R’: rare earth elements; T: transition metal elements around the ferromagnetic - ferromagnetic (ferro.-ferro. transition temperature. Evolution of the magnetic structure across such transition requires comprehensive investigation. In this work, pseudobinary system Tb(Co1-xFex2 is selected to investigate the evolution of local magnetic moment, for which two end terminals TbCo2 and TbFe2 possess the rhombohedral (R structure at the ferromagnetic state but with different magnetic ordering temperatures (TC. Magnetometry measurements reveal that a composition independent ferromagnetic - ferromagnetic transition occurs at ∼100 K despite the increased Curie temperature TC with raised Fe concentration in the Tb(Co1-xFex2. Synchrotron XRD data reveal that both the lattice parameter and the lattice strain along the direction are abnormally temperature dependent, accompanied with experimentally observed magnetostriction abnormality at 100 K. In-situ neutron powder diffraction (NPD results show that the local magnetic moments of T2 (9e site atoms are also abnormally temperature dependent, which is larger at 100 K than that at a lower temperature 50 K. Such findings indicate close correlations between the magnetic structure and the magnetostrictive effect in the pseudobinary RT2 compounds.

(Li1−xFexOHFeSe Superconductors: Crystal Growth, Structure, and Electromagnetic Properties

Directory of Open Access Journals (Sweden)

Guo-Yong Zhang

2017-06-01

Full Text Available This review focuses on the growth of high-quality (Li1−xFexOHFeSe single crystals by a hydrothermal method using floating-zone-grown AxFe2−ySe2 (A = K, Rb, and Cs as precursors. The structure, superconductivity, and magnetic behavior of the obtained crystals are highly influenced by the growth conditions, such as time, temperature, and composition. A phase diagram with temperature against the c-lattice constant is summarized including the antiferromagnetic spin density wave, superconducting, and paramagnetic phases.

Use of Infrasound for evaluating potentially hazardous conditions for barge transit on the Mississippi River at Vicksburg, Mississippi

Science.gov (United States)

McKenna, M. H.; Simpson, C. P.; Jordan, A. M.

2017-12-01

Navigating the Mississippi River in Vicksburg, MS is known to be difficult for barge traffic in even the best of conditions due to the river's sharp bend 2 km north of the Highway 80 Bridge. When river levels rise, the level of difficulty in piloting barges under the bridge rises. Ongoing studies by the U.S. Army Engineer Research and Development Center (ERDC) are investigating infrasound as a means to correlate the low frequency acoustics generated by the river with the presence of hazardous conditions observed during flood stage, i.e., rough waters and high currents, which may lead to barge-bridge impacts. The Denied Area Monitoring and Exploitation of Structures (DAMES) Array at the ERDC Vicksburg, MS campus is a persistent seismic-acoustic array used for structural monitoring and explosive event detection. The DAMES Array is located 4.3 km from the Mississippi River/Highway 80 Bridge junction and recorded impulsive sub-audible acoustic signals, similar to an explosive event, from barge-bridge collisions that occurred between 2011 and 2017. This study focuses on five collisions that occurred during January 2016, which resulted in closing the river for barge transit and the Highway 80 Bridge for rail transit for multiple days until safety inspections were completed. The Highway 80 Bridge in Vicksburg, MS is the only freight-crossing over the Mississippi River between Baton Rouge, LA and Memphis, TN, meaning delays from these closings have significant impacts on all transit of goods throughout the Southeastern United States. River basin data and regional meteorological data have been analyzed to find correlations between the river conditions in January 2016, and recorded infrasound data with the aim of determining the likelihood that hazardous conditions are present on the river. Frequency-wavenumber analysis was used to identify the transient signals associated with the barge-bridge impacts and calculate the backazimuth to their source. Then, with the use of

7 CFR 800.97 - Weighing grain in containers, land carriers, barges, and shiplots.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Weighing grain in containers, land carriers, barges... (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Weighing Provisions and Procedures § 800.97 Weighing grain in...

Transport properties and spin correlations of La1.85-xSr0.15+xCu1-xFexO4

DEFF Research Database (Denmark)

Xu, G.J.; Pu, Q.R.; Liu, B.

2004-01-01

A series of double-doped La1.85-xSr0.15+xCu1-xFexO4 (0less than or equal toxless than or equal to1) ceramic samples were prepared by the solid-state reaction method. The structure, transport properties, and spin correlations were studied by means of x-ray diffraction, resistivity, thermoelectric...

Electrochemical Activity of a La0.9Ca0.1Co1−xFexO3 Catalyst for a Zinc Air Battery Electrode

Directory of Open Access Journals (Sweden)

Seungwook Eom

2015-01-01

Full Text Available The optimum composition of cathode catalyst has been studied for rechargeable zinc air battery application. La0.9Ca0.1Co1−xFexO3  (x=0–0.4 perovskite powders were prepared using the citrate method. The substitution ratio of Co2+ with Fe3+ cations was controlled in the range of 0–0.4. The optimum substitution ratio of Fe3+ cations was determined by electrochemical measurement of the air cathode composed of the catalyst, polytetrafluoroethylene (PTFE binder, and Vulcan XC-72 carbon. The substitution by Fe enhanced the electrochemical performances of the catalysts. Considering oxygen reduction/evolution reactions and cyclability, we achieved optimum substitution level of x=0.1 in La0.9Ca0.1Co1−xFexO3.

Spin Dynamics in Highly Spin Polarized Co1-xFexS2

Science.gov (United States)

Hoch, Michael J. R.; Kuhns, Philip L.; Moulton, William G.; Reyes, Arneil P.; Lu, Jun; Wang, Lan; Leighton, Chris

2006-09-01

Highly spin polarized or half-metallic systems are of considerable current interest because of their potential for spin injection in spintronics applications. The ferromagnet (FM) CoS2 is close to being a half-metal. Recent theoretical and experimental work has shown that the alloys Co1-xFexS2 (0.07 < x < 0.9) are highly spin polarized at low temperatures. The Fe concentration may be used to tune the spin polarization. Using 59Co FM- NMR we have investigated the spin dynamics in this family of alloys and have obtained information on the evolution of the d-band density of states at the Fermi level with x in the range 0 to 0.3. The results are compared with available theoretical predictions.

The prototype design of gFEX — A component of the L1Calo Trigger for the ATLAS Phase-I upgrade

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00304146; The ATLAS collaboration; Chen, Kai; Lanni, Francesco; Takai, Helio; Tang, Shaochun; Wu, Weihao

2016-01-01

The ATLAS experiment will follow the upgrade steps of the Large Hadron Collider (LHC), which will undergo a series of upgrades to increase the luminosity in the next ten years. During the Phase-I upgrade, a new component will be designed for the ATLAS Level-1 calorimeter trigger system to maintain the trigger acceptance against the increasing luminosity - the global feature extractor (gFEX). The gFEX is intended to identify patterns of energy associated with the hadronic decays of high momentum Higgs, W & Z bosons, top quarks and exotic particles in real time at the LHC crossing rate. A prototype v1 with one System-on-Chip Xilinx ZYNQ FPGA, and one Vertex-7 FPGA for technology validation has been designed and tested in 2015. With the lessons learned from the prototype v1, a prototype v2 with three UltraScale FPGAs and one ZYNQ FPGA is implemented on an ATCA module. This board will receive coarse-granularity information from the entire ATLAS calorimeter on 276 optical fibers at the speed up to 12.8 Gb/s sy...

Advanced marine reactor MRX and application to nuclear barge supplying electricity and heat

International Nuclear Information System (INIS)

Ishida, Toshihisa; Kusunoki, Tsuyoshi; Odano, Naoteru; Yoritsune, Tsutomu; Fukuhara, Yoshifumi; Ochiai, Masa-aki

2000-01-01

The basic design concept of an advanced marine reactor MRX has been established with adoption of several new technologies. The MRX is an integral-type PWR with 100 MWt aimed basically for use of ship propulsion. Adoption of a water-filled containment together with the integral type reactor makes the reactor light-weight and compact greatly. A engineered safety system is a simplified passive system, function of which is confirmed by the safety analysis. The MRX can be applied to an energy supply system of electricity and heat co-generation by installing it on a barge. Concept of a nuclear barge with the MRX of 334 MWt output is presented for use of supplying electricity, fresh water and hot water. Combined system of electric generation and desalination with the RO process can deliver variable output of electricity and fresh water according a demand. Latent heat of the exhausted steam from the turbine can be used effectively to raise the temperature of cold water as heat supply. (author)

77 FR 24840 - Safety Zone; Crowley Barge 750-2, Bayou Casotte, Pascagoula, MS

Science.gov (United States)

2012-04-26

... its possible commercial and contractual obligations. Under 5 U.S.C. 553(d)(3), the Coast Guard finds... process would unnecessarily interfere with launching the barge and its possible commercial and contractual obligations. Basis and Purpose VT-Halter Pascagoula is a ship yard and repair facility located on Bayou...

Epitaxial growth and magnetic properties of ultraviolet transparent Ga2O3/(Ga1-xFex)2O3 multilayer thin films.

Science.gov (United States)

Guo, Daoyou; An, Yuehua; Cui, Wei; Zhi, Yusong; Zhao, Xiaolong; Lei, Ming; Li, Linghong; Li, Peigang; Wu, Zhenping; Tang, Weihua

2016-04-28

Multilayer thin films based on the ferromagnetic and ultraviolet transparent semiconductors may be interesting because their magnetic/electronic/photonic properties can be manipulated by the high energy photons. Herein, the Ga2O3/(Ga1-xFex)2O3 multilayer epitaxial thin films were obtained by alternating depositing of wide band gap Ga2O3 layer and Fe ultrathin layer due to inter diffusion between two layers at high temperature using the laser molecular beam epitaxy technique. The multilayer films exhibits a preferred growth orientation of crystal plane, and the crystal lattice expands as Fe replaces Ga site. Fe ions with a mixed valence of Fe(2+) and Fe(3+) are stratified distributed in the film and exhibit obvious agglomerated areas. The multilayer films only show a sharp absorption edge at about 250 nm, indicating a high transparency for ultraviolet light. What's more, the Ga2O3/(Ga1-xFex)2O3 multilayer epitaxial thin films also exhibits room temperature ferromagnetism deriving from the Fe doping Ga2O3.

Magnetic properties of Mn3-xFexSn compounds with tuneable Curie temperature by Fe content for thermomagnetic motors

Science.gov (United States)

Felez, Marissol R.; Coelho, Adelino A.; Gama, Sergio

2017-12-01

Mn3-xFexSn system (0.00 ≤ x ≤ 3.00 with Δx = 0.25) alloys present the Curie temperature (TC) or transition temperature (TT) tuneable by the Fe content. A piece-wise linear profile for TC,T as a function of x is observed in a two wide temperature ranges, between 155 K up to 759 K and 259 K up to 155 K. Their equations are TC,T = (59 ± 15) + (240 ± 7)·x and TC,T = (257 ± 1) - (206 ± 4)·x, respectively. The alloys are low cost and easy manufacturing, rare earth free, with second order magnetic transition (SOMT), and have good magnetic properties. These features suggest an immediate application of the material in cascade thermomagnetic motors that operate with a large temperature range between hot and cold sources. Furthermore, SOMT Mn-Fe-Sn system materials are also reported with advantages that could make alloys of the Mn3-xFexSn system, (0.88 ≤ x ≤ 1.20), promising candidate for magnetic refrigeration. The typical ferromagnetic behaviour is achieved only by samples with x ≥ 1. The samples with x between 0.00 and 0.75 do not show the saturation magnetization even using fields up to 13 T.

Oyster polynuclear aromatic hydrocarbon fingerprinting applied to the Apex barge oil spill

International Nuclear Information System (INIS)

Wade, T.L.; Jackson, T.J.; McDonald, T.J.; Sericano, J.L.; Brooks, J.M.

1993-01-01

An estimated 692,000 gallons of catalytic feed stock oil was spilled into Galveston Bay on July 28, 1990, when a tanker collided with three Apex barges in the Houston Ship Channel. Oysters were collected and analyzed from Galveston Bay Todd's Dump (GBRD) before the spill and after the spill. Oysters were also collected from Galveston Bay Redfish Island (GBRI), a site known to be impacted by the spill, 37 and 110 days after the spill. The spilled oil was also analyzed. The concentration of 18 polynuclear aromatic hydrocarbons (PAH) measured as part of the National Oceanic and Atmospheric Administration's National Status ampersand Trends (NS ampersand T) showed a sharp increase from 100 ng/g to over 600 ng/g. Concentrations of these 18 PAHs were also found at GBRI. Fingerprinting techniques applied to data from oyster analyses demonstrated the presence of bioavailable Apex Barge oil 37, 110, and 132 days after the spill at GHTD and GBRI. Fingerprinting becomes less diagnostic with time due to possible environmental weathering of the oil. The fingerprint from GBTD 495 and 851 days after the spill will be presented and discussed

Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility.

Energy Technology Data Exchange (ETDEWEB)

Pratt, Joseph William [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Harris, Aaron P. [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2013-01-01

A barge-mounted hydrogen-fueled proton exchange membrane (PEM) fuel cell system has the potential to reduce emissions and fossil fuel use of maritime vessels in and around ports. This study determines the technical feasibility of this concept and examines specific options on the U.S. West Coast for deployment practicality and potential for commercialization.The conceptual design of the system is found to be straightforward and technically feasible in several configurations corresponding to various power levels and run times.The most technically viable and commercially attractive deployment options were found to be powering container ships at berth at the Port of Tacoma and/or Seattle, powering tugs at anchorage near the Port of Oakland, and powering refrigerated containers on-board Hawaiian inter-island transport barges. Other attractive demonstration options were found at the Port of Seattle, the Suisun Bay Reserve Fleet, the California Maritime Academy, and an excursion vessel on the Ohio River.

33 CFR 101.125 - Approved Alternative Security Programs.

Science.gov (United States)

2010-07-01

... 106 of this subchapter, as applicable: (a) American Gaming Association Alternative Security Program..., and Towboats and Barges, dated September 24, 2003. (c) Passenger Vessel Association Industry Standards...

Coupled Responses of Sewol, Twin Barges and Slings During Salvage

Science.gov (United States)

Yao, Zong; Wang, Wei-ping; Jiang, Yan; Chen, Shi-hai

2018-04-01

Korean Sewol is successfully lifted up with the strand jack system based on twin barges. During the salvage operation, two barges and Sewol encounter offshore environmental conditions of wave, current and wind. It is inevitable that the relative motions among the three bodies are coupled with the sling tensions, which may cause big dynamic loads for the lifting system. During the project engineering phase and the site operation, it is necessary to build up a simulation model that can precisely generate the coupled responses in order to define a suitable weather window and monitor risks for the salvage operation. A special method for calculating multibody coupled responses is introduced into Sewol salvage project. Each body's hydrodynamic force and moment in multibody configuration is calculated in the way that one body is treated as freely moving in space, while other bodies are set as fixed globally. The hydrodynamic force and moment are then applied into a numerical simulation model with some calibration coefficients being inserted. These coefficients are calibrated with the model test results. The simulation model built up this way can predict coupled responses with the similar accuracy as the model test and full scale measurement, and particularly generate multibody shielding effects. Site measured responses and the responses only resulted from from the simulation keep project management simultaneously to judge risks of each salvage stage, which are important for success of Sewol salvage.

Epitaxial growth and magnetic properties of ultraviolet transparent Ga2O3/(Ga1−xFex)2O3 multilayer thin films

Science.gov (United States)

Guo, Daoyou; An, Yuehua; Cui, Wei; Zhi, Yusong; Zhao, Xiaolong; Lei, Ming; Li, Linghong; Li, Peigang; Wu, Zhenping; Tang, Weihua

2016-01-01

Multilayer thin films based on the ferromagnetic and ultraviolet transparent semiconductors may be interesting because their magnetic/electronic/photonic properties can be manipulated by the high energy photons. Herein, the Ga2O3/(Ga1−xFex)2O3 multilayer epitaxial thin films were obtained by alternating depositing of wide band gap Ga2O3 layer and Fe ultrathin layer due to inter diffusion between two layers at high temperature using the laser molecular beam epitaxy technique. The multilayer films exhibits a preferred growth orientation of crystal plane, and the crystal lattice expands as Fe replaces Ga site. Fe ions with a mixed valence of Fe2+ and Fe3+ are stratified distributed in the film and exhibit obvious agglomerated areas. The multilayer films only show a sharp absorption edge at about 250 nm, indicating a high transparency for ultraviolet light. What’s more, the Ga2O3/(Ga1−xFex)2O3 multilayer epitaxial thin films also exhibits room temperature ferromagnetism deriving from the Fe doping Ga2O3. PMID:27121446

Multiple-Criteria Decision-Making in the Design of Innovative Lock Walls for Barge Impact; Phase 1

National Research Council Canada - National Science Library

Lambert, James

2001-01-01

.... This research project consists of two phases: Phase 1, which culminates with this report, investigated the use of multiple-criteria decision-making in the design process of lock approach walls to consider barge impact and earthquake loads...

Effects of barge traffic on distribution and survival of ichthyoplankton and small fishes in the upper Mississippi River

Science.gov (United States)

Holland, L.E.

1986-01-01

Short-term impacts of commercial barge traffic on fish eggs, larvae, young-of-the-year (age-0) fishes, and small adults in the main channel of the upper Mississippi River were examined. Barge passages caused significant changes in the distribution of eggs and larvae in the study area. The mean catch of ichthyoplankton was reduced in both surface and bottom waters for 90 min after passage of vessels downstream. The effects of upstream traffic on catch ranged from nil in surface or bottom samples to short-term increases in surface samples immediately after passage. No consistent effect on the catch of age-0 or small adult fishes in surface or bottom trawls was evident.

Fe-induced enhancement of antiferromagnetic spin correlations in Mn2-xFexBO4

Science.gov (United States)

Kazak, N. V.; Platunov, M. S.; Knyazev, Yu. V.; Moshkina, E. M.; Gavrilkin, S. Yu.; Bayukov, O. A.; Gorev, M. V.; Pogoreltsev, E. I.; Zeer, G. M.; Zharkov, S. M.; Ovchinnikov, S. G.

2018-04-01

Fe substitution effect on the magnetic behavior of Mn2-xFexBO4 (x = 0.3, 0.5, 0.7) warwickites has been investigated combining Mössbauer spectroscopy, dc magnetization, ac magnetic susceptibility, and heat capacity measurements. The Fe3+ ions distribution over two crystallographic nonequivalent sites is studied. The Fe introduction breaks a long-range antiferromagnetic order and leads to onset of spin-glass ground state. The antiferromagnetic short-range-order spin correlations persist up to temperatures well above TSG reflecting in increasing deviations from the Curie-Weiss law, the reduced effective magnetic moment and "missing" entropy. The results are interpreted in the terms of the progressive increase of the frustration effect and the formation of spin-correlated regions.

Laboratory data on Snake River steelhead - Evaluation of methods to reduce straying rates of barged juvenile steelhead

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The goals of this study are to develop methods to reduce wandering and straying of steelhead (Oncorhynchus mykiss) that are collected and barged from the Snake River...

DESAIN SELF-PROPELLED CAR BARGE UNTUK DISTRIBUSI MOBIL BARU RUTE CIKARANG BEKASI LAUT (CBL – TANJUNG PERAK

Directory of Open Access Journals (Sweden)

Bintang Jiwa Jiwa

2017-01-01

Full Text Available Berbagai upaya telah dilakukan Pemerintah untuk dapat mengurangi kemacetan jalur Pantura. Mulai dari pemberian jalur alternatif, pelebaran jalan, hingga pembuatan jalan tol baru. Segala upaya tersebut tidak sebanding dengan jumlah kendaraan yang terus meningkat melewati jalur Pantura, khususnya kendaraan-kendaraan barang seperti truk dan kontainer. Hal ini tidak terlepas dari geliat perekonomian yang terus tumbuh. Kawasan industri otomotif di sekitar Cikarang dan Bekasi salah satu contohnya. Jumlah produksi mobil domestik dan permintaan yang terus meningkat ini membutuhkan sarana yang baik dan cepat dalam mendistribusikan mobil baru ke berbagai daerah. Dalam beberapa tahun ini, Jawa Timur merupakan provinsi dengan tingkat permintaan mobil yang cukup tinggi di Indonesia. Oleh karena itu, salah satu solusi yang ditawarkan untuk dapat mengurangi kemacetan di jalur darat adalah berupa pengalihan transportasi darat ke sungai atau laut. Berdasarkan solusi tersebut, maka dibutuhkan alat transportasi pengangkut barang, dalam hal ini mobil, yang dapat melewati sungai dan laut. Self-propelled car barge diharapkan mampu menjadi inovasi yang cukup baik dalam mendistribusikan barang melalui rute Sungai Cikarang Bekasi Laut (CBL menuju ke Pelabuhan Tanjung Perak. Untuk mendapatkan ukuran utama yang optimum digunakan metode optimation design approach dengan bantuan fitur solver pada program Microsoft Excel dengan menjadikan biaya pembangunan paling minimum sebagai fungsi objektif, serta adanya batasan-batasan dari persyaratan teknis dan regulasi yang ada. Dari proses optimisasi, didapatkan ukuran utama optimum Self-Propelled Car Barge adalah L=53.10 m, B=15.17 m, TFW=3.09 m, TSW=3.02 m, dan H=4.66 m, dengan estimasi biaya pembangunan sebesar $1.435.270,56 atau setara Rp.19.281.424.757,10.

Flat Top Barge 300 feet Using Portable Dynamic Positioning System

Directory of Open Access Journals (Sweden)

Agoes Santoso

2017-03-01

Full Text Available Portable Dynamic Positioning System has not commonly applied to the ship, especially on barge. Besides for Dynamic Positioning function, the system can be used as ship's main propulsion. By using this system, the ship able to not using anchors because the functions can be performed by the Portable Dynamic System. Therefore, research about the application of Portable Dynamic Positioning System on the ship is conducted. This research aims to design a Flat Top Barge 300feet ship, to determine the specifications of Portable Dynamic Positioning System which is used, and to find out the ship stability which is designed on the empty payload condition and maximum payload. This research designed the ships with main dimensions LWL 90.1 meters, 25 meters wide, 5.5 meters high and 4.2 meters draught. To generate the ship with a maximum speed of 8 knots, it takes four thruster supplied with power 225 kW each, so that the total generated power is 1100 kW. This study analyzes three conditions of the ship stability, there are the condition of full payload, empty payload, and maximum payload. Each payload conditions will be analyzed regarding the large payload and draught water produced. The first is full payload conditions resulting payload in the amount of 5650 ton with a draught on the LCF at 4,181 meters. The second is the large empty payload condition displacement is 2809 ton and water draught on the LCF at 1,591. And the last is maximum payload conditions, resulting payload in the amount of 7450 ton with a draught on the LCF at 4,994 meters.

Lattice dynamics of Ru2FeX (X = Si, Ge) Full Heusler alloys

Science.gov (United States)

Rizwan, M.; Afaq, A.; Aneeza, A.

2018-05-01

In present work, the lattice dynamics of Ru2FeX (X = Si, Ge) full Heusler alloys are investigated using density functional theory (DFT) within generalized gradient approximation (GGA) in a plane wave basis, with norm-conserving pseudopotentials. Phonon dispersion curves and phonon density of states are obtained using first-principles linear response approach of density functional perturbation theory (DFPT) as implemented in Quantum ESPRESSO code. Phonon dispersion curves indicates for both Heusler alloys that there is no imaginary phonon in whole Brillouin zone, confirming dynamical stability of these alloys in L21 type structure. There is a considerable overlapping between acoustic and optical phonon modes predicting no phonon band gap exists in dispersion curves of alloys. The same result is shown by phonon density of states curves for both Heusler alloys. Reststrahlen band for Ru2FeSi is found smaller than Ru2FeGe.

Barge loading facilities in conjunction with wood chipping and sawlog mill, Tennessee River Mile 145. 9R: Environmental assessment

Energy Technology Data Exchange (ETDEWEB)

1990-08-01

The purpose of this Environmental Assessment (EA) is to evaluate the environmental consequences of approving, denying, or adopting reasonable alternatives to a request for barge loading facilities. These facilities would serve a proposed wood chipping and sawlog products operation at Tennessee River Mile (TRM) 145.9, right descending bank, (Kentucky Lake), in Perry County, Tennessee. The site is located between Short Creek and Peters Landing. The applicant is Southeastern Forest Products, L.P. (SFP), Box 73, Linden, Tennessee and the proposed facilities would be constructed on or adjacent to company owned land. Portions of the barge terminal would be constructed on land over which flood easement rights are held by the United States of America and administered by the Tennessee Valley Authority (TVA). The US Army Corps of Engineers (CE) and TVA have regulatory control over the proposed barge terminal facilities since the action would involve construction in the Tennessee River which is a navigable water of the United States. The wood chipping and sawlog products facilities proposed on the upland property are not regulated by the CE or TVA. On the basis of the analysis which follows, it has been determined that a modified proposal (as described herein) would not significantly affect the quality of the human environment, and does not require the preparation of an environmental impact statement. 8 refs.

Market Anatomy of a Drought: Modeling Barge and Corn Market Adaptation to Reduced Rainfall and Low Mississippi River Water Levels During the 2012 Midwestern U.S. Drought

Science.gov (United States)

Foster, B.; Characklis, G. W.; Thurman, W. N.

2015-12-01

In mid 2012, a severe drought swept across the Midwest, the heartland of corn production in the U.S. When the drought persisted into late Fall, corn markets were affected in two distinct ways: (1) reduced rainfall led to projected and actual corn yields that were lower than expected and (2) navigation restrictions, a result of low water levels on the Mississippi River, disrupted barge transportation, the most common and inexpensive mode for moving corn to many markets. Both (1) and (2) led to significant financial losses, but due to the complexity of the economic system and the coincidence of two different market impacts, the size of the role that low water levels played wass unclear. This is important, as losses related to low water levels are used to justify substantial investments in dredging activities on the Mississippi River. An "engineering" model of the system, suggests that low water levels should drive large increases in barge and corn prices, while some econometric models suggest that water levels explain very little of the changes in barge rates and corn prices. Employing a model that integrates both the engineering and economic elements of the system indicates that corn prices and barge rates during the drought display spatial and temporal behavior that is difficult to explain using either the engineering or econometric models alone. This integrated model accounts for geographic and temporal variations in drought impacts and identifies unique market responses to four different sets of conditions over the drought's length. Results illustrate that corn and barge price responses during the drought were a product of comingled, but distinct, reactions to both supply changes and navigation disruptions. Results also provide a more structured description of how the economic system that governs corn allocation interacts with the Mississippi River system during drought. As both public and private parties discuss potential managerial or infrastructural methods

A static analysis method for barge-impact design of bridges with consideration of dynamic amplification : final report, November 2009.

Science.gov (United States)

2009-11-01

Current practice with regard to designing bridge structures to resist impact loads associated with barge collisions relies upon the : use of the American Association of State Highway and Transportation Officials (AASHTO) bridge design specifications....

A decision support system tool for the transportation by barge of import containers : A case study

NARCIS (Netherlands)

Fazi, Stefano; Fransoo, Jan C.; Van Woensel, Tom

2015-01-01

In this paper, we present a DSS that generates schedules for the transportation of containers by barge in the hinterland, in particular from sea terminals to an inland terminal. As a case study, we propose the transportation from the ports of Rotterdam and Antwerp to a terminal in the south of the

33 CFR 165.830 - Regulated Navigation Area; Reporting Requirements for Barges Loaded with Certain Dangerous...

Science.gov (United States)

2010-07-01

... either by telephone to (866) 442-6089, by fax to (866) 442-6107, or by e-mail to [email protected] A reporting form and e-mail link are available at http://www.uscg.mil/d8/Divs/M/IRVMC.htm. (5) The general... used to move, transport, or deliver a CDC barge within a fleeting area. Inland River Vessel Movement...

33 CFR 165.921 - Regulated Navigation Area; Reporting Requirements for Barges Loaded with Certain Dangerous...

Science.gov (United States)

2010-07-01

... either by telephone to (866) 442-6089, by fax to (866) 442-6107, or by e-mail to [email protected] A reporting form and e-mail link are available at http://www.uscg.mil/d8/Divs/M/IRVMC.htm. (5) The general... size vessel that is used to move, transport, or deliver a CDC barge within a fleeting area. Fleeting...

Recovery of the Irving Whale oil barge: overflights with the laser environmental airborne fluorosensor

International Nuclear Information System (INIS)

Brown, C. E.; Nelson, R. D.; Fingas, M.

1997-01-01

Contribution of Environment Canada's laser environmental airborne fluorosensor (LEAF) to the recovery in 1996 of the oil barge 'Irving Whale' from the St. Lawrence River was described. Additional equipment employed on board the DC-3 aircraft included an RC-10 colour mapping camera and two down-looking video cameras. Leaking of Bunker C fuel oil was detected around the sunken barge in the days immediately prior to and during the day of the raising of the vessel. During each overflight, the LEAF system produced timely, concise map-based contamination information in hard copy form. The LEAF system also detected extremely thin, sub-sheen levels of oil on the day of the lift over the majority of the southern Gulf of St. Lawrence. The extent of coverage was greatly reduced by the next day and essentially eliminated by the second day after the lift. The LEAF system continued to monitor the 'Irving Whale' as it was transported to Halifax on the deck of the submersible vessel Boabarge 10. There was no evidence of oil leakage during the transit attributable to the 'Irving Whale'. During the entire period of lift and recovery the LEAF system performed flawlessly, and demonstrated the usefulness of remote sensing flights during oil spill response operations. 3 refs., 4 figs

33 CFR 207.640 - Sacramento Deep Water Ship Channel Barge Lock and Approach Canals; use, administration, and...

Science.gov (United States)

2010-07-01

... damage by their operations to the lock or other structures. They must use great care not to strike any.... All tow lines or hawsers must be hauled as short as practicable for safe handling of tows. (15) Crew... sufficient number of men to handle lines in mooring craft and to move barges and other craft into and out of...

Design of 100 MW LNG Floating Barge Power Plant

Directory of Open Access Journals (Sweden)

I Made Ariana

2017-06-01

Full Text Available Floating bargepower plant able to supply amount of electricity to undeveloped island in Indonesia. In this research, the generator will be use in the power plant is dual-fuel engine. The process was determine the engine and every equipment along with its configuration then arrange the equipment. The result, MAN18V51/60DF selected along with its system configuration and its general arrangement. The final design enable 7.06 days of operation with daily average load (64.76 MW or 4.57 days with continues 100 MW load. In the end, the mobile power plant can be built on Damen B32SPo9832 Barge and comply with the regulation floating bargepower plant able to supply amount of electricity to undeveloped island in Indonesia. In this research, the generator will be use in the power plant is dual-fuel engine. The process was determine the engine and every equipment along with its configuration then arrange the equipment. The result, MAN18V51/60DF selected along with its system configuration and its general arrangement. The final design enable 7.06 days of operation with daily average load (64.76 MW or 4.57 days with continues 100 MW load. In the end, the mobile power plant can be built on Damen B32SPo9832 Barge and comply with the regulation Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Composition-dependent magnetic response properties of Mn1 -xFexGe alloys

Science.gov (United States)

Mankovsky, S.; Wimmer, S.; Polesya, S.; Ebert, H.

2018-01-01

The composition-dependent behavior of the Dzyaloshinskii-Moriya interaction (DMI), the spin-orbit torque (SOT), as well as anomalous and spin Hall conductivities of Mn1 -xFexGe alloys have been investigated by first-principles calculations using the relativistic multiple scattering Korringa-Kohn-Rostoker (KKR) formalism. The Dxx component of the DMI exhibits a strong dependence on the Fe concentration, changing sign at x ≈0.85 in line with previous theoretical calculations as well as with experimental results demonstrating the change of spin helicity at x ≈0.8 . A corresponding behavior with a sign change at x ≈0.5 is predicted also for the Fermi-sea contribution to the SOT, because this is closely related to the DMI. In the case of anomalous and spin Hall effects it is shown that the calculated Fermi-sea contributions are rather small and the composition-dependent behavior of these effects are determined mainly by the electronic states at the Fermi level. The spin-orbit-induced scattering mechanisms responsible for both these effects suggest a common origin of the minimum of the anomalous Hall effect and the sign change of the spin Hall effect conductivities.

75 FR 78928 - Limited Service Domestic Voyage Load Lines for River Barges on Lake Michigan, Delay of Effective...

Science.gov (United States)

2010-12-17

...-AA17 Limited Service Domestic Voyage Load Lines for River Barges on Lake Michigan, Delay of Effective Date AGENCY: Coast Guard, DHS. ACTION: Notice of delay of effective date and reopening of the comment... 46 CFR part 45 as amended by the final rule published in the November 18, 2010, Federal Register (75...

High-pressure studies on nanocrystalline borderline Co1-xFexS2 (x = 0.4 and 0.5) using Mössbauer spectroscopic and electrical resistivity techniques up to 8 GPa

Science.gov (United States)

Chandra, Usha; Sharma, Pooja; Parthasarathy, G.

2016-12-01

Like bulk, Co1-xFexS2 nanoparticles also display an anomaly at x = 0.5. The borderline contiguous Co1-xFexS2 (x = 0.4 and 0.5) nanoparticles were synthesized with colloidal method and characterized for pyrite structure using various techniques, viz., X-ray diffraction, energy dispersive X-ray analysis (EDAX), S K-edge X-ray absorption near edge spectra, transmission electron microscopy (TEM) and Fourier transformed infra-red spectroscopy. The report presents the effect of high pressure on the borderline compositions using the Mössbauer spectroscopic and electrical resistivity techniques. Magnetic measurements on the system showed drastic lowering of Tc due to nanosize of the particles. With increased pressure, quadrupole splitting showed an expected trend of increase to attain a peak representing a second-order phase transition between 4 and 5 GPa for both the compositions. The pressure coefficient of electrical resistivity varied from -0.02 GPa to -0.06 GPa across transition pressure indicating a sluggish nature of transition. This is the first report of pressure effect on nanosized borderline compositions.

Structural and Electrochemical Characterization of Zn1−xFexO—Effect of Aliovalent Doping on the Li+ Storage Mechanism

Directory of Open Access Journals (Sweden)

Gabriele Giuli

2017-12-01

Full Text Available In order to further improve the energy and power density of state-of-the-art lithium-ion batteries (LIBs, new cell chemistries and, therefore, new active materials with alternative storage mechanisms are needed. Herein, we report on the structural and electrochemical characterization of Fe-doped ZnO samples with varying dopant concentrations, potentially serving as anode for LIBs (Rechargeable lithium-ion batteries. The wurtzite structure of the Zn1−xFexO samples (with x ranging from 0 to 0.12 has been refined via the Rietveld method. Cell parameters change only slightly with the Fe content, whereas the crystallinity is strongly affected, presumably due to the presence of defects induced by the Fe3+ substitution for Zn2+. XANES (X-ray absorption near edge structure data recorded ex situ for Zn0.9Fe0.1O electrodes at different states of charge indicated that Fe, dominantly trivalent in the pristine anode, partially reduces to Fe2+ upon discharge. This finding was supported by a detailed galvanostatic and potentiodynamic investigation of Zn1−xFexO-based electrodes, confirming such an initial reduction of Fe3+ to Fe2+ at potentials higher than 1.2 V (vs. Li+/Li upon the initial lithiation, i.e., discharge. Both structural and electrochemical data strongly suggest the presence of cationic vacancies at the tetrahedral sites, induced by the presence of Fe3+ (i.e., one cationic vacancy for every two Fe3+ present in the sample, allowing for the initial Li+ insertion into the ZnO lattice prior to the subsequent conversion and alloying reaction.

Synthesis, crystal structure, and transport properties of Fe substituted rhombohedral skutterudite derivatives Co4−xFexGe6Se6

KAUST Repository

Wei, Kaya

2014-11-01

We report on the synthesis and low temperature transport properties of rhombohedral derivatives of the cubic skutterudite CoSb3, namely Co4-xFexGe6Se6 with x = 0, 1, 1.5. Rietveld refinement and elemental analyses were used to identify the structure and stoichiometry of the compositions. The thermal conductivity was investigated by employing the Debye model with different phonon-scattering parameters. This investigation demonstrates that Fe substitution is feasible in these skutterudite derivatives and can significantly affect the transport properties as compared with Co4Ge6Se6. © 2014 Elsevier B.V. All rights reserved.

Synthesis, crystal structure, and transport properties of Fe substituted rhombohedral skutterudite derivatives Co4−xFexGe6Se6

KAUST Repository

Wei, Kaya; Dong, Yongkwan; Puneet, Pooja; Tritt, Terry M.; Nolas, George S.

2014-01-01

We report on the synthesis and low temperature transport properties of rhombohedral derivatives of the cubic skutterudite CoSb3, namely Co4-xFexGe6Se6 with x = 0, 1, 1.5. Rietveld refinement and elemental analyses were used to identify the structure and stoichiometry of the compositions. The thermal conductivity was investigated by employing the Debye model with different phonon-scattering parameters. This investigation demonstrates that Fe substitution is feasible in these skutterudite derivatives and can significantly affect the transport properties as compared with Co4Ge6Se6. © 2014 Elsevier B.V. All rights reserved.

Preliminary Computational Fluid Dynamics (CFD) Simulation of EIIB Push Barge in Shallow Water

Science.gov (United States)

Beneš, Petr; Kollárik, Róbert

2011-12-01

This study presents preliminary CFD simulation of EIIb push barge in inland conditions using CFD software Ansys Fluent. The RANSE (Reynolds Averaged Navier-Stokes Equation) methods are used for the viscosity solution of turbulent flow around the ship hull. Different RANSE methods are used for the comparison of their results in ship resistance calculations, for selecting the appropriate and removing inappropriate methods. This study further familiarizes on the creation of geometrical model which considers exact water depth to vessel draft ratio in shallow water conditions, grid generation, setting mathematical model in Fluent and evaluation of the simulations results.

PHAEOPIGMENT CONCENTRATION, PHYTOPLANKTON - WET WEIGHT and other data from BARGE from 1975-05-01 to 1975-07-01 (NCEI Accession 7600377)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Water depth and other data from the BARGE from 01 May 1975 to 01 July 1975. Data were collected by the Skidway Institute of Oceanography (SKIO) as part of the...

Magnetic and magnetocaloric properties of the alloys Mn2-xFexP0.5As0.5 (0⩽x⩽0.5)

Science.gov (United States)

Gribanov, I. F.; Golovchan, A. V.; Varyukhin, D. V.; Val'kov, V. I.; Kamenev, V. I.; Sivachenko, A. P.; Sidorov, S. L.; Mityuk, V. I.

2009-10-01

The results of investigations of the magnetic and magnetocaloric properties of alloys from the system Mn2-xFexP0.5As0.5 (0⩽x⩽0.5) are presented. The magnetization measurements are performed in the temperature interval 4.2-700K in magnetic fields up to 8T. The entropy changes ΔS with the magnetic field changing from 0 to 2, 4, 5, and 8T are determined from the magnetization isotherms obtained near temperatures of the spontaneous appearance of the ferromagnetic state (TC,TAF -FM1), and the curves ΔS(T0) are constructed. It is found that TC and TAF-FM1 decrease monotonically with increasing manganese concentration and that the ferromagnetic phase is completely suppressed in Mn1.5Fe0.5P0.5As0.5. It is found that the concentration dependences of the maximum entropy jump (and the corresponding cold-storage capacity) and the magnitudes of the ferromagnetic moment of the unit cell with maxima for x =0.9 and 0.8 show extremal behavior. The data obtained are compared with the ferromagnetic moments calculated from first principles by the Korringa-Kohn-Rostoker method using the coherent-potential approximation (KKR-CPA)—the discrepancy for 0.5⩽x⩽0.7 is attributed to the appearance of an antiferromagnetic component of the magnetic structure. It is concluded that the alloys Mn2-xFexP0.5As0.5 have promise for use in magnetic refrigerators operating at room temperature.

The thermal analysis of BR-100: A barge/rail nuclear spent fuel transportation container

International Nuclear Information System (INIS)

Copsey, A.B.

1992-01-01

B ampersand W Fuel Company is designing a spent-fuel container called BR-100 that can be used for either barge or rail transport. This paper presents the thermal design and analysis. Both normal operation and hypothetical accident thermal transient conditions are evaluated. The BR-100 cask has a concrete layer than contains free water. During a hypothetical accident, the free water vaporizes and flows from the cask, removing a significant amount of thermal transient energy. The BR-100 transportation package meets the thermal requirements of 10CFR71. It additionally offers substantial margins to established material temperature limits

Fixed position holding control for self-propulsion barges under disturbance condition; Gairanka ni okeru jiko baji no teiten hoji seigyo ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Kijima, K; Murata, W; Furukawa, Y [Kyushu University, Fukuoka (Japan). Faculty of Engineering

1996-04-10

In direct hoisting work in suspension bridge construction, since a cable crane directly hoists a bridge beam block put on a barge on the sea, precise fixed position holding function is required for a barge. The control system was then designed on the basis of an ILQ control theory, and the effect of change in time constant as design parameter on fixed position holding performance was studied. In addition, the critical disturbance for fixed position holding control was studied through numerical simulation under various disturbance conditions using the above designed control system. As a result, in the design of control systems on the basis of an ILQ control theory, the precise control system could be designed by diminishing, in particular, the time constant for state variable around a z axis among time constants according to the extent of disturbance. The control performance was largely affected by response delay period from sensing of disturbance to beginning of control. 3 refs., 7 figs., 2 tabs.

Determination of the intrinsic α/γ interface mobility during massive transformations in interstitial free Fe-X alloys

International Nuclear Information System (INIS)

Zhu, Jianing; Luo, Haiwen; Yang, Zhigang; Zhang, Chi; Van der Zwaag, Sybrand; Chen, Hao

2017-01-01

Kinetics of the austenite (γ) to ferrite (α) transformation and the reverse ferrite (α) to austenite (γ) transformation in a series of Fe-X (X = Ni, Mn and Co) binary alloys has been experimentally and theoretically investigated. A transition from partitioning to partitionless transformation has been predicted to occur during both the γ→α and α→γ transformations by a so called Gibbs Energy Balance (GEB) model, in which the chemical driving force is assumed to be equal to the energy dissipation due to interface friction and diffusion of X inside the migrating interfaces. The transition temperature is found to depend on the kind of X and its concentration, which is in good agreement with experimental results. The intrinsic mobility of the α/γ interface has been derived from the kinetic curves of both the γ→α and α→γ transformations in the investigated alloys, and its value seems to be marginally affected by the transformation direction and alloying elements.

Role of oxygen defects on the magnetic properties of ultra-small Sn1-xFexO2 nanoparticles

Science.gov (United States)

Dodge, Kelsey; Chess, Jordan; Eixenberger, Josh; Alanko, Gordon; Hanna, Charles B.; Punnoose, Alex

2013-05-01

Although the role of oxygen defects in the magnetism of metal oxide semiconductors has been widely discussed, it is been difficult to directly measure the oxygen defect concentration of samples to verify this. This work demonstrates a direct correlation between the photocatalytic activity of Sn1-xFexO2 nanoparticles and their magnetic properties. For this, a series of ˜2.6 nm sized, well characterized, single-phase Sn1-xFexO2 crystallites with x = 0-0.20 were synthesized using tin acetate, urea, and appropriate amounts of iron acetate. X-ray photoelectron spectroscopy confirmed the concentration and 3+ oxidation state of the doped Fe ions. The maximum magnetic moment/Fe ion, μ, of 1.6 × 10-4 μB observed for the 0.1% Fe doped sample is smaller than the expected spin-only contribution from either high or low spin Fe3+ ions, and μ decreases with increasing Fe concentration. This behavior cannot be explained by the existing models of magnetic exchange. Photocatalytic studies of pure and Fe-doped SnO2 were used to understand the roles of doped Fe3+ ions and of the oxygen vacancies and defects. The photocatalytic rate constant k also showed an increase when SnO2 nanoparticles were doped with low concentrations of Fe3+, reaching a maximum at 0.1% Fe, followed by a rapid decrease of k for further increase in Fe%. Fe doping presumably increases the concentration of oxygen vacancies, and both Fe3+ ions and oxygen vacancies act as electron acceptors to reduce e--h+ recombination and promote transfer of electrons (and/or holes) to the nanoparticle surface, where they participate in redox reactions. This electron transfer from the Fe3+ ions to local defect density of states at the nanoparticle surface could develop a magnetic moment at the surface states and leads to spontaneous ferromagnetic ordering of the surface shell under favorable conditions. However, at higher doping levels, the same Fe3+ ions might act as recombination centers causing a decrease of both k and

Jovian Vortices and Barges: HST observations 1994-1998

Science.gov (United States)

Morales, R.; Sanchez-Lavega, A.; Lecacheux, J.; Colas, F.; Miyazaki, I.

2000-10-01

We have used the HST-WFPC2 archived images of Jupiter in the period 1994-1998 to study the zonal and meridional distributions, long-term motions, lifetimes, interactions and other properties of the vortices larger than 2 degrees. The latitude range covered spans from +75 to -75 degrees. High-resolution images obtained with the 890nm, 410nm and 953nm wavelength filters allowed us to make a morphological classification based on their appearance in each filter. The vortices are anticyclones, and their long-term motions have been completed with ground-based images and are compared to the mean Jovian zonal wind profile. Significant differences are found between the vortex velocities and the mean zonal winds. Some vortices exhibited important drift changes in short period times. We analyze a possible correlation between their size and zonal wind velocity. On the other hand, the "barges" lie in the cyclone domains of the wind-profile and have been identified in several latitudes. Their latitudinal size is similar in all of them (typically 1.6 degrees) but their longitudinal size ranges from 1 to 32 degrees. We discuss the temporal evolution of some of these cyclonic regions. The Spanish team was supported by Gobierno Vasco PI 034/97. The French team was supported by the "Programme National de Planetologie." RM acknowledges a fellowship from Universidad Pais Vasco.

An inter-laboratory trial of the unified BARGE bioaccessibility method for arsenic, cadmium and lead in soil

International Nuclear Information System (INIS)

Wragg, Joanna; Cave, Mark; Basta, Nick; Brandon, Esther; Casteel, Stan; Denys, Sebastien; Gron, Christian; Oomen, Agnes; Reimer, Kenneth; Tack, Karine; Van de Wiele, Tom

2011-01-01

The Bioaccessibility Research Group of Europe (BARGE) has carried out an inter-laboratory trial of a proposed harmonised in vitro physiologically based ingestion bioaccessibility procedure for soils, called the Unified BARGE Method (UBM). The UBM includes an initial saliva phase and simulated stomach and intestine compartments. The trial involved the participation of seven laboratories (five European and two North American) providing bioaccessibility data for As (11 samples), Cd (9 samples) and Pb (13 samples) using soils with in vivo relative bioavailability data measured using a swine model. The results of the study were compared with benchmark criteria for assessing the suitability of the UBM to provide data for human health risk assessments. Mine waste and slag soils containing high concentrations of As caused problems of poor repeatability and reproducibility which were alleviated when the samples were run at lower soil to solution ratios. The study showed that the UBM met the benchmark criteria for both the stomach and stomach and intestine phase for As. For Cd, three out of four criteria were met for the stomach phase but only one for the stomach and intestine phase. For Pb two, out of four criteria were met for the stomach phase and none for the stomach and intestine phase. However, the study recommends tighter control of pH in the stomach phase extraction to improve between-laboratory variability, more reproducible in vivo validation data and that a follow up inter-laboratory trial should be carried out.

An inter-laboratory trial of the unified BARGE bioaccessibility method for arsenic, cadmium and lead in soil

Energy Technology Data Exchange (ETDEWEB)

Wragg, Joanna [British Geological Survey, Nottingham (United Kingdom); Cave, Mark, E-mail: mrca@bgs.ac.uk [British Geological Survey, Nottingham (United Kingdom); Basta, Nick [School of Environment and Natural Resources, Ohio State University, Columbus, OH, 43210-1085 (United States); Brandon, Esther [National Institute for Public Health and the Environment, Bilthoven (Netherlands); Casteel, Stan [College of Veterinary Medicine, University of Missouri, 65205 (United States); Denys, Sebastien [INERIS, Parc Technologique Alata, Verneuil-en-Halatte (France); Gron, Christian [DHI Water Environment Health, Horsholm (Denmark); Oomen, Agnes [National Institute for Public Health and the Environment, Bilthoven (Netherlands); Reimer, Kenneth [Environmental Sciences Group, Royal Military College of Canada, Kingston, Ontario (Canada); Tack, Karine [INERIS, Parc Technologique Alata, Verneuil-en-Halatte (France); Van de Wiele, Tom [Laboratory of Microbial Ecology and Technology, University of Ghent, Ghent (Belgium)

2011-09-01

The Bioaccessibility Research Group of Europe (BARGE) has carried out an inter-laboratory trial of a proposed harmonised in vitro physiologically based ingestion bioaccessibility procedure for soils, called the Unified BARGE Method (UBM). The UBM includes an initial saliva phase and simulated stomach and intestine compartments. The trial involved the participation of seven laboratories (five European and two North American) providing bioaccessibility data for As (11 samples), Cd (9 samples) and Pb (13 samples) using soils with in vivo relative bioavailability data measured using a swine model. The results of the study were compared with benchmark criteria for assessing the suitability of the UBM to provide data for human health risk assessments. Mine waste and slag soils containing high concentrations of As caused problems of poor repeatability and reproducibility which were alleviated when the samples were run at lower soil to solution ratios. The study showed that the UBM met the benchmark criteria for both the stomach and stomach and intestine phase for As. For Cd, three out of four criteria were met for the stomach phase but only one for the stomach and intestine phase. For Pb two, out of four criteria were met for the stomach phase and none for the stomach and intestine phase. However, the study recommends tighter control of pH in the stomach phase extraction to improve between-laboratory variability, more reproducible in vivo validation data and that a follow up inter-laboratory trial should be carried out.

Simultaneous observations of equatorial F-region plasma depletions over Brazil during the Spread-F Experiment (SpreadFEx

Directory of Open Access Journals (Sweden)

P.-D. Pautet

2009-06-01

Full Text Available From September to November 2005, the NASA Living with a Star program supported the Spread-F Experiment campaign (SpreadFEx in Brazil to study the effects of convectively generated gravity waves on the ionosphere and their role in seeding Rayleigh-Taylor instabilities, and associated equatorial plasma bubbles. Several US and Brazilian institutes deployed a broad range of instruments (all-sky imagers, digisondes, photometers, meteor/VHF radars, GPS receivers covering a large area of Brazil. The campaign was divided in two observational phases centered on the September and October new moon periods. During these periods, an Utah State University (USU all-sky CCD imager operated at São João d'Aliança (14.8° S, 47.6° W, near Brasilia, and a Brazilian all-sky CCD imager located at Cariri (7.4° S, 36° W, observed simultaneously the evolution of the ionospheric bubbles in the OI (630 nm emission and the mesospheric gravity wave field. The two sites had approximately the same magnetic latitude (9–10° S but were separated in longitude by ~1500 km.

Plasma bubbles were observed on every clear night (17 from Brasilia and 19 from Cariri, with 8 coincident nights. These joint datasets provided important information for characterizing the ionospheric depletions during the campaign and to perform a novel longitudinal investigation of their variability. Measurements of the drift velocities at both sites are in good agreement with previous studies, however, the overlapping fields of view revealed significant differences in the occurrence and structure of the plasma bubbles, providing new evidence for localized generation. This paper summarizes the observed bubble characteristics important for related investigations of their seeding mechanisms associated with gravity wave activity.

Simultaneous observations of equatorial F-region plasma depletions over Brazil during the Spread-F Experiment (SpreadFEx

Directory of Open Access Journals (Sweden)

P.-D. Pautet

2009-06-01

Full Text Available From September to November 2005, the NASA Living with a Star program supported the Spread-F Experiment campaign (SpreadFEx in Brazil to study the effects of convectively generated gravity waves on the ionosphere and their role in seeding Rayleigh-Taylor instabilities, and associated equatorial plasma bubbles. Several US and Brazilian institutes deployed a broad range of instruments (all-sky imagers, digisondes, photometers, meteor/VHF radars, GPS receivers covering a large area of Brazil. The campaign was divided in two observational phases centered on the September and October new moon periods. During these periods, an Utah State University (USU all-sky CCD imager operated at São João d'Aliança (14.8° S, 47.6° W, near Brasilia, and a Brazilian all-sky CCD imager located at Cariri (7.4° S, 36° W, observed simultaneously the evolution of the ionospheric bubbles in the OI (630 nm emission and the mesospheric gravity wave field. The two sites had approximately the same magnetic latitude (9–10° S but were separated in longitude by ~1500 km. Plasma bubbles were observed on every clear night (17 from Brasilia and 19 from Cariri, with 8 coincident nights. These joint datasets provided important information for characterizing the ionospheric depletions during the campaign and to perform a novel longitudinal investigation of their variability. Measurements of the drift velocities at both sites are in good agreement with previous studies, however, the overlapping fields of view revealed significant differences in the occurrence and structure of the plasma bubbles, providing new evidence for localized generation. This paper summarizes the observed bubble characteristics important for related investigations of their seeding mechanisms associated with gravity wave activity.

Nizhny Novgorod Belyana barge in the XIX century

Directory of Open Access Journals (Sweden)

Philippov Yury V.

2015-01-01

Full Text Available The article discusses a unique Belyana barge, which was built in the Nizhny Novgorod region for several centuries. Belyana as a type of vessels was designed for transportation of logs, sleepers, beams, planks and other forest products from the Upper to the Lower Volga. Originally, the center of Belyana construction was the village of Baki, which was situated on the Vetluga River, a tributary of the Volga River. The Belyana construction technique spread from the Vetluga river banks further to Nizhny Novgorod, and then to Perm region. Almost all aspects of Belyana construction starting from the logging finishing with its floating to the lower Volga, and also cost of transported products in the prices of the XIX century are disclosed. Due to Belyana is truly a popular invention, it was built by traditional methods, relying solely on the centuries-old experience. Any drawings for the construction never existed, that’s why the author relied on preserved photographs and drawings in the historical reconstruction of this unique vessel. At the beginning of the article a brief overview of the geographical location of Nizhny Novgorod, as well as the names of wooden ships which were sailing on Volga and its tributaries in the same times with Belyana are given. At the end of the article practical recommendations on possible reconstruction of Belyana and using it as an interactive museum of ethnography are given.

Louisiana's oil spill program : new developments

International Nuclear Information System (INIS)

Debusschere, K.; Tedford, R.; Brolin, J.; Lorentz, W.

2000-01-01

The Louisiana Oil Spill Coordinator's Office (LOSCO) was established to improve oil spill response, spill prevention and coordination. Louisiana is challenged with having the highest exposure of oil spills because a large portion of its economy is based on oil and gas exploration and production. LOSCO will find ways to minimize the risk of unauthorized oil spills and will address damage assessment and restoration efforts. The aging oil and gas infrastructure in Louisiana has also been recognized as a potential major source for oil spills. LOSCO locates potential spill locations and assesses the risks associated with the sites, some of which are 100 years old. LOSCO also initiated the following two programs: (1) the Abandoned Barge Program initiated in 1993 to remove abandoned barges that pose a high risk for oil discharge, and (2) the Abandoned Non-Hazardous Oil Waste (NOW) Pit and Facility Program initiated in 1992 to locate and remove structures, pits and wells that pose a risk for oil spills. About 25,000 facilities, pits, sumps and reservoirs have been inventoried and evaluated to determine if they pose a risk to human health or the environment. The Louisiana Oil Spill Prevention and Response Act (OSPRA) of 1991 allocates up to $2 million per year for the abatement of oil spills from abandoned facilities in Louisiana. The state legislature has also created the Applied and Educational Oil Spill Research and Development Program (OSRADP) to fund oil spill research. Since 1993, OSRADP has granted 68 awards in support of 42 projects, many of which focused on recovery and cleanup methods including in-situ burning, fate and effect of oil in Louisiana environments, bioremediation, phytoremediation, composting, chemical cleaners, dispersants, sorbents, and solidifiers. 3 refs., 1 tab

Tuning martensitic transformation, large magnetoresistance and strain in Ni50-xFexMn36Sn14 Heusler alloys

Science.gov (United States)

Liao, Pan; Jing, Chao; Zheng, Dong; Li, Zhe; Kang, Baojuan; Deng, Dongmei; Cao, Shixun; Lu, Bo; Zhang, Jincang

2015-09-01

We have investigated the martensitic transformation, exchange bias, magnetoresistance (MR) and strain in Ni50-xFexMn36Sn14 (x=1, 2, 3, 4) Heusler alloys. With the increase of Fe content, the austenite phase could be stabilized with L21 structure and hence the martensitic transition shifts to a lower temperature and finally disappears. This behavior can be understood by the weakening of Ni-Mn hybridization to suppress AFM interactions and enhancement of Fe-Fe ferromagnetic exchange interactions. The same reason can account for the slight decrease of exchange bias field (HEB) with the increase of the Fe content from x=1 to 2 and the disappearance of HEB for x=3. We observed MR effect for x=3, and a maximum MR value of -52% was achieved, which can be explained by the change in the electronic structure during martensitic transformation induced by the magnetic field. In addition, a large strain of 0.207% in Ni49Fe1Mn36Sn14 was observed due to the changes of lattice parameters during the martensitic transformation induced by temperature.

Interface for Barge-in Free Spoken Dialogue System Based on Sound Field Reproduction and Microphone Array

Directory of Open Access Journals (Sweden)

Hinamoto Yoichi

2007-01-01

Full Text Available A barge-in free spoken dialogue interface using sound field control and microphone array is proposed. In the conventional spoken dialogue system using an acoustic echo canceller, it is indispensable to estimate a room transfer function, especially when the transfer function is changed by various interferences. However, the estimation is difficult when the user and the system speak simultaneously. To resolve the problem, we propose a sound field control technique to prevent the response sound from being observed. Combined with a microphone array, the proposed method can achieve high elimination performance with no adaptive process. The efficacy of the proposed interface is ascertained in the experiments on the basis of sound elimination and speech recognition.

Structure and magnetic properties of flux grown single crystals of Co3-xFexSn2S2 shandites

Science.gov (United States)

Kassem, Mohamed A.; Tabata, Yoshikazu; Waki, Takeshi; Nakamura, Hiroyuki

2016-01-01

We report a successful single crystal growth of the shandite-type half-metallic ferromagnet Co3Sn2S2, and its Fe-substituted compounds, Co3-xFexSn2S2, by employing the flux method. Although Fe3Sn2S2 is unstable phase, we found that using the self Sn flux enables us to obtain single phase crystals up to x=0.53. The chemical composition of the grown plate-shaped single crystals was examined using wavelength-dispersive X-ray spectroscopy. The shandite structure with R 3 ̅m symmetry was confirmed by powder X-ray diffraction and the crystal structure parameters were refined using the Rietveld method. Magnetization measurements show suppression of the ferromagnetic order upon Fe-substitution , as well as in other substituted systems such as In- and Ni-substituted Co3Sn2S2. The almost identical magnetic phase diagrams of the Fe- and In-substituted compounds indicate that the electron number is dominantly significant to the magnetism in the Co-based shandite.

Effect of magnetic coupling on non-radiative relaxation time of Fe3+ sites on LaAl1-xFexO3 pigments

Science.gov (United States)

Novatski, A.; Somer, A.; Maranha, F. G.; de Souza, E. C. F.; Andrade, A. V. C.; Antunes, S. R. M.; Borges, C. P. F.; Dias, D. T.; Medina, A. N.; Astrath, N. G. C.

2018-02-01

Inorganic pigments of the system LaAl1-xFexO3 were prepared by the Pechini and the Solid State Reaction (SSR) methods. Magnetic interactions and non-radiative relaxation time were analyzed by means of phase-resolved photoacoustic spectroscopy and electron paramagnetic resonance (EPR) techniques. EPR results show a change in the magnetic behavior from paramagnetic (x = 0.2 and 0.4) to antiferromagnetic (x = 1.0), which is believed to be a result of the SSR preparation method. Trends in the optical absorption bands of the Fe3+ are attributed to their electronic transitions, and the increase in the band's intensity at 480 and 550 nm was assigned to the increase in the magnetic coupling between Fe-Fe. The phase-resolved method is capable of distinguishing between the two preparation methods, and it is possible to infer that SSR modifies the magnetic coupling of Fe-Fe with x.

Magnetic properties and potential barrier between crystallites model of MgGa2-xFexO4 ceramics

Directory of Open Access Journals (Sweden)

V. A. dos S. Ribeiro

Full Text Available Abstract The aim of this work was to investigate the magnetic properties and the electrical conductivity temperature dependence associated to the potential barrier between the crystallites model. Gallium and magnesium containing spinel ceramic has low magnetic coercivity and high electrical resistivity. MgGa2-xFexO4 samples (x= 0.01, 0.05, 0.15, 0.25, 0.35 were prepared by solid-state method and sintered at 800 °C for 8 h. X-ray diffraction analysis confirmed the formation of a single phase with compact cubic spinel structure. The magnetic measurements show that the saturation magnetization and remanence of all samples increased with increasing iron concentration. The coercive field decreased up to the concentration x= 0.15, and above x= 0.25 it was observed an increase in the coercive field. Through electrical characterization it was found that the samples presented highly insulating behavior for x= 0.01, and further increase in x above 0.15 gives a semiconductor behavior compatible with the potential barrier between the crystallites model, i.e. fulfills the condition L/2 > LD (crystallite size L in comparison with the Debye length LD, and the conduction is limited by potential barriers between the crystallites.

The solubility and site preference of Fe3+ in Li7-3xFexLa3Zr2O12 garnets

Science.gov (United States)

Rettenwander, D.; Geiger, C. A.; Tribus, M.; Tropper, P.; Wagner, R.; Tippelt, G.; Lottermoser, W.; Amthauer, G.

2015-10-01

A series of Fe3+-bearing Li7La3Zr2O12 (LLZO) garnets was synthesized using solid-state synthesis methods. The synthetic products were characterized compositionally using electron microprobe analysis and inductively coupled plasma optical emission spectroscopy (ICP-OES) and structurally using X-ray powder diffraction and 57Fe Mössbauer spectroscopy. A maximum of about 0.25 Fe3+ pfu could be incorporated in Li7-3xFexLa3Zr2O12 garnet solid solutions. At Fe3+ concentrations lower than about 0.16 pfu, both tetragonal and cubic garnets were obtained in the synthesis experiments. X-ray powder diffraction analysis showed only a garnet phase for syntheses with starting materials having intended Fe3+ contents lower than 0.52 Fe3+ pfu. Back-scattered electron images made with an electron microprobe also showed no phase other than garnet for these compositions. The lattice parameter, a0, for all solid-solution garnets is similar with a value of a0≈12.98 Å regardless of the amount of Fe3+. 57Fe Mössbauer spectroscopic measurements indicate the presence of poorly- or nano-crystalline FeLaO3 in syntheses with Fe3+ contents greater than 0.16 Fe3+ pfu. The composition of different phase pure Li7-3xFexLa3Zr2O12 garnets, as determined by electron microprobe (Fe, La, Zr) and ICP-OES (Li) measurements, give Li6.89Fe0.03La3.05Zr2.01O12, Li6.66Fe0.06La3.06Zr2.01O12, Li6.54Fe0.12La3.01Zr1.98O12, and Li6.19Fe0.19La3.02Zr2.04O12. The 57Fe Mössbauer spectrum of cubic Li6.54Fe0.12La3.01Zr1.98O12 garnet indicates that most Fe3+ occurs at the special crystallographic 24d position, which is the standard tetrahedrally coordinated site in garnet. Fe3+ in smaller amounts occurs at a general 96h site, which is only present for certain Li-oxide garnets, and in Li6.54Fe0.12La3.01Zr1.98O12 this Fe3+ has a distorted 4-fold coordination.

Synthesis, morphological, electromechanical characterization of (CaMgFex)Fe1-xTi3O12-δ/PDMS nanocomposite thin films for energy storage application

Science.gov (United States)

Tripathy, Ashis; Sharma, Priyaranjan; Sahoo, Narayan

2018-03-01

At the present time, flexible and stretchable electronics has intended to use the new cutting-edge technologies for advanced electronic application. Currently, Polymers are being employed for such applications but they are not effective due to their low dielectric constant. To enhance the dielectric properties of polymer for energy storage application, it is necessary to add ceramic material of high dielectric constant to synthesize a polymer-ceramic composite. Therefore, a novel attempt has been made to enhance the dielectric properties of the Polydimethylsiloxane (PDMS) polymer by adding (CaMgFex)Fe1-xTi3O12-δ(0ceramic powder. The newly developed CMFTO2/PDMS composite based thin film shows a higher dielectric constant (ε‧) value (~350), extremely low tangent loss (tanδ) ( 90%), which can make it a potential material for advanced flexible electronic devices, energy storage and biomedical applications.

First principles prediction of the magnetic properties of Fe-X6 (X = S, C, N, O, F) doped monolayer MoS2

KAUST Repository

Feng, Nan; Mi, Wenbo; Cheng, Yingchun; Guo, Zaibing; Schwingenschlö gl, Udo; Bai, Haili

2014-01-01

Using first-principles calculations, we have investigated the electronic structure and magnetic properties of Fe-X 6 clusters (X = S, C, N, O, and F) incorporated in 4 4 monolayer MoS 2, where a Mo atom is substituted by Fe and its nearest S atoms are substituted by C, N, O, and F. Single Fe and Fe-F 6 substituions make the system display half-metallic properties, Fe-C 6 and Fe-N 6 substitutions lead to a spin gapless semiconducting behavior, and Fe-O 6 doped monolayer MoS 2 is semiconducting. Magnetic moments of 1.93, 1.45, 3.18, 2.08, and 2.21...? B are obtained for X = S, C, N, O, and F, respectively. The different electronic and magnetic characters originate from hybridization between the X and Fe/Mo atoms. Our results suggest that cluster doping can be an efficient strategy for exploring two-dimensional diluted magnetic semiconductors.

First principles prediction of the magnetic properties of Fe-X6 (X = S, C, N, O, F) doped monolayer MoS2

KAUST Repository

Feng, Nan

2014-02-05

Using first-principles calculations, we have investigated the electronic structure and magnetic properties of Fe-X 6 clusters (X = S, C, N, O, and F) incorporated in 4 4 monolayer MoS 2, where a Mo atom is substituted by Fe and its nearest S atoms are substituted by C, N, O, and F. Single Fe and Fe-F 6 substituions make the system display half-metallic properties, Fe-C 6 and Fe-N 6 substitutions lead to a spin gapless semiconducting behavior, and Fe-O 6 doped monolayer MoS 2 is semiconducting. Magnetic moments of 1.93, 1.45, 3.18, 2.08, and 2.21...? B are obtained for X = S, C, N, O, and F, respectively. The different electronic and magnetic characters originate from hybridization between the X and Fe/Mo atoms. Our results suggest that cluster doping can be an efficient strategy for exploring two-dimensional diluted magnetic semiconductors.

Investigation of the hydrodynamic model test of forced rolling for a barge using PIV

Directory of Open Access Journals (Sweden)

WANG Xiaoqiang

2017-03-01

Full Text Available In order to study the physical details of viscous flow in ship roll motions and improve the accuracy of ship roll damping numerical simulation, the application of the Particle Image Velocimetry (PIV technique is investigated in model tests of forced ship rolling in calm water. The hydrodynamic force and flow field at the bilge region are simultaneously measured for barges at different amplitudes and frequencies in which the self-made forced rolling facility was used. In the model test, the viscous flow variation with the time around the bilge region was studied during ship rolling motion. The changes in ship roll damping coefficients with the rolling amplitude and period were also investigated. A comparison of the model test results with the Computational Fluid Dynamics(CFDresults shows that the numerical ship roll damping coefficients agree well with the model test results, while the differences in the local flow details exist between the CFD results and model test results. Further research into the model test technique and CFD application is required.

Improvement of effect of water-in-oil microemulsion as an oral delivery system for fexofenadine: in vitro and in vivo studies

Science.gov (United States)

Gundogdu, E; Alvarez, I Gonzalez; Karasulu, E

2011-01-01

Fexofenadine (FEX) has high solubility and low permeability (BCS, Class III). In this work, novel FEX loaded water in oil microemulsion (w/o) was designed to improve bioavailability and compared with Fexofen® syrup in in vitro and in vivo studies. In addition, pharmacokinetic parameters in permeability studies were estimated by using WinNonLin software program. w/o microemulsion system was optimized using a pseudoternary phase diagram, composed of span 80/lutrol F 68 (9.5:0.5 w/w), oleic acide, isopropyl alcohol and water as surfactant mixture; oil and cosurfactant was developed for oral drug delivery. w/o microemulsion systems were characterized by phase behavior, particle size, viscosity and solubilization capacity. In vitro studies were studied using Caco-2 cell monolayer. Pharmacokinetic parameters of w/o microemulsion were investigated in rabbits and compared to Fexofen® syrup. Fexofen® syrup and microemulsion were administered by oral gavage at 6 mg/kg of the same concentration. The experimental results indicated that microemulsion (HLB = 5.53) formed nanometer sized droplets (33.29 ± 1.76) and had good physical stability. This microemulsion increased the oral bioavailability of FEX which was highly water-soluble but fairly impermeable. The relative bioavailability of FEX microemulsion was about 376.76% compared with commercial syrup in rabbits. In vitro experiments were further employed for the enhanced effect of the microemulsion for FEX. These results suggest that novel w/o microemulsion plays an important role in enhancing oral bioavailability of low permeability drugs. PMID:21904453

Evolution with Composition of the d-Band Density of States at the Fermi Level in Highly Spin Polarized Co1-xFexS2

Science.gov (United States)

Kuhns, P. L.; Hoch, M. J. R.; Reyes, A. P.; Moulton, W. G.; Wang, L.; Leighton, C.

2006-04-01

Highly spin polarized (SP) and half-metallic ferromagnetic systems are of considerable current interest and of potential importance for spintronic applications. Recent work has demonstrated that Co1-xFexS2 is a highly polarized ferromagnet (FM) where the spin polarization can be tuned by alloy composition. Using Co59 FM-NMR as a probe, we have measured the low-temperature spin relaxation in this system in magnetic fields from 0 to 1.0 T for 0≤x≤0.3. The Co59 spin-lattice relaxation rates follow a linear T dependence. Analysis of the data, using expressions for a FM system, permits information to be obtained on the d-band density of states at the Fermi level. The results are compared with independent density of states values inferred from electronic specific heat measurements and band structure calculations. It is shown that FM-NMR can be an important method for investigating highly SP systems.

Electrodeposited and Sol-gel Precipitated p-type SrTi1-xFexO3-δ Semiconductors for Gas Sensing

Directory of Open Access Journals (Sweden)

Ralf Moos

2007-09-01

Full Text Available In the present contribution, three methods for the preparation of nanoscaledSrTi1-xFexO3-δ sensor films for hydrocarbon sensing were investigated. Besides screen-printed thick films based on sol-precipitated nanopowders, two novel synthesis methods,electrospinning and electrospraying, were tested successfully. All of these sensor devicesshowed improved sensor functionality in comparison to conventional microscaled thickfilms. In order to explain the impact of the enhanced surface-to-volume ratio on sensorproperties in a quantitative way, a mechanistic model was applied to micro- and nanoscaleddevices. In contrast to the conventional diffusion-reaction model that has been proposed forn-type semiconducting sensors, it contained novel approaches with respect to themicroscopic mechanism. With very few fit variables, the present model was found torepresent well sensor functionality of p-type conducting SrTi0.8Fe0.2O3-δ films. In additionto the temperature dependency of the sensor response, the effect of the specific surface areaon the sensor response was predicted.

INTERLINE 5.0 -- An expanded railroad routing model: Program description, methodology, and revised user's manual

International Nuclear Information System (INIS)

Johnson, P.E.; Joy, D.S.; Clarke, D.B.; Jacobi, J.M.

1993-03-01

A rail routine model, INTERLINE, has been developed at the Oak Ridge National Laboratory to investigate potential routes for transporting radioactive materials. In Version 5.0, the INTERLINE routing algorithms have been enhanced to include the ability to predict alternative routes, barge routes, and population statistics for any route. The INTERLINE railroad network is essentially a computerized rail atlas describing the US railroad system. All rail lines, with the exception of industrial spurs, are included in the network. Inland waterways and deep water routes along with their interchange points with the US railroadsystem are also included. The network contains over 15,000 rail and barge segments (links) and over 13,000 stations, interchange points, ports, and other locations (nodes). The INTERLINE model has been converted to operate on an IBM-compatible personal computer. At least a 286 computer with a hard disk containing approximately 6 MB of free space is recommended. Enhanced program performance will be obtained by using arandom-access memory drive on a 386 or 486 computer

Preliminary technical and economic viability for the implantation of fluvial transport of CNG (Compressed Natural Gas) for barges in Amazon Region; Avaliacao preliminar de viabilidade tecnico-economica para implantacao de transporte fluvial de GNC (Gas Natual Comprimido) por barcacas na Regiao Amazonica

Energy Technology Data Exchange (ETDEWEB)

Araujo, Marcos C.C. de; Porto, Paulo L. Lemgruber [Interocean Engenharia e Ship Management, Rio de janeiro, RJ (Brazil); Cunha, Rafael H. da [Metro Rio, RJ (Brazil); Garcia, Rafael M. [Pic Brasil (Brazil); Almeida, Marco A.R. de [Universidade Gama Filho (UGF), Rio de Janeiro, RJ (Brazil)

2004-07-01

The isolated regions of the Amazon present difficulties for integration with the electrical system which is creating some economic problems due to the consequent costs of electric generation of subsidies as a function of the fossil fuel use as oils diesel and fuel. A viable option is the use of Natural Gas - NG that is Also available in the region. Its modal of transport possible in the Region North they are for gas-lines or barges. The Compressed Natural Gas transport is distinguished that - CNG for barges was still not tested operationally in Brazil. Soon, to develop a Preliminary Study of Viability Technician - Economic - SVTE for the implantation of fluvial transport of CNG between the cities of Coari and Manaus is basic, therefore it is created strategical alternative for the electric generation in this region. The electric sector, the characteristics of the NG and the transport in this region had been analyzed to support to the work. The gas line and the fluvial transport of CNG for barges in this region are not conflicting, and they in a complementary form can act. The SVTE presented a Liquid Present Value and Internal Tax of very attractive Return justifying its implantation. (author)

Highly efficient and robust cathode materials for low-temperature solid oxide fuel cells: PrBa0.5Sr0.5Co2−xFexO5+δ

Science.gov (United States)

Choi, Sihyuk; Yoo, Seonyoung; Kim, Jiyoun; Park, Seonhye; Jun, Areum; Sengodan, Sivaprakash; Kim, Junyoung; Shin, Jeeyoung; Jeong, Hu Young; Choi, YongMan; Kim, Guntae; Liu, Meilin

2013-01-01

Solid oxide fuel cells (SOFC) are the cleanest, most efficient, and cost-effective option for direct conversion to electricity of a wide variety of fuels. While significant progress has been made in anode materials with enhanced tolerance to coking and contaminant poisoning, cathodic polarization still contributes considerably to energy loss, more so at lower operating temperatures. Here we report a synergistic effect of co-doping in a cation-ordered double-perovskite material, PrBa0.5Sr0.5Co2−xFexO5+δ, which has created pore channels that dramatically enhance oxygen ion diffusion and surface oxygen exchange while maintaining excellent compatibility and stability under operating conditions. Test cells based on these cathode materials demonstrate peak power densities ~2.2 W cm−2 at 600°C, representing an important step toward commercially viable SOFC technologies. PMID:23945630

Cytological-cytogenetic analyses of winter flounder embryos collected from the Benthos at the barge North Cape oil spill

Energy Technology Data Exchange (ETDEWEB)

Hughes, J B [Milford Laboratory, CT (United States). Northeast Fisheries Science Center

1999-01-01

The oil barge North Cape ran aground on Moonstone Beach in Rhode Island on January 19, 1996, spilling 828 000 gallons (US) of a combination of diesel and home heating oils. Samples of winter flounder embryos were collected from salt ponds in the area of the spill using an epibenthic sled. An examination of the field-sampled embryos based on gross morphology, levels of moribund embryos, mitotic index, and chromosomal anomalies found that a significant number exhibited high levels of one or more of these conditions when compared with flounder embryos raised under laboratory-controlled conditions. No chorion damage was noted in embryos collected from the field nor were there any significant findings of lordosis or scoliosis. The cumulative impact on winter flounder embryos of North Cape oil exposure was an estimated 51% reduction in the number of embryos surviving to the larval stage. (author)

Boosted object hardware trigger development and testing for the Phase I upgrade of the ATLAS Experiment

CERN Document Server

Stark, Giordon Holtsberg; The ATLAS collaboration

2015-01-01

The Global Feature Extraction (gFEX) module is a Level 1 jet trigger system planned for installation in ATLAS during the Phase 1 upgrade in 2018. The gFEX selects large-radius jets for capturing Lorentz-boosted objects by means of wide-area jet algorithms refined by subjet information. The architecture of the gFEX permits event-by-event local pile-up suppression for these jets using the same subtraction techniques developed for offline analyses. The gFEX architecture is also suitable for other global event algorithms such as missing transverse energy (MET), centrality for heavy ion collisions, and "jets without jets". The gFEX will use 4 processor FPGAs to perform calculations on the incoming data and a Hybrid APU-FPGA for slow control of the module. The gFEX is unique in both design and implementation and substantially enhance the selectivity of the L1 trigger and increases sensitivity to key physics channels.

Elastic and anelastic anomalies associated with the antiferromagnetic ordering transition in wüstite, FexO

Science.gov (United States)

Zhang, Zhiying; Church, Nathan; Lappe, Sophie-Charlotte; Reinecker, Marius; Fuith, Armin; Saines, Paul J.; Harrison, Richard J.; Schranz, Wilfried; Carpenter, Michael A.

2012-05-01

The elastic and anelastic properties of three different samples of FexO have been determined in the frequency range 0.1-2 MHz by resonant ultrasound spectroscopy and in the range 0.1-50 Hz by dynamic mechanical analysis in order to characterize ferroelastic aspects of the magnetic ordering transition at TN ˜ 195 K. No evidence was found of separate structural and magnetic transitions but softening of the shear modulus was consistent with the involvement of bilinear coupling, λe4q, between a symmetry-breaking strain, e4, and a structural order parameter, q. Unlike a purely ferroelastic transition, however, C44 does not go to zero at the critical temperature, {T}_{{c}}^{\\ast }, due to the intervention of the magnetic ordering at a higher temperature. The overall pattern of behaviour is nevertheless consistent with what would be expected for a system with separate structural and magnetic instabilities, linear-quadratic coupling between the structural (q) and magnetic (m) driving order parameters, λqm2, and {T}_{{N}}\\gt {T}_{{c}}^{\\ast }. Comparison with data from the literature appears to confirm the same pattern in MnO and NiO, with a smaller difference between TN and {T}_{{c}}^{\\ast } in the former and a larger difference in the latter. Strong attenuation of acoustic resonances at high frequencies and a familiar pattern of attenuation at low frequencies suggest that twin walls in the rhombohedral phase have typical ferroelastic properties. Acoustic dissipation in the stability field of the cubic phase is tentatively attributed to anelastic relaxations of the defect ordered structure of non-stoichiometric wüstite or of the interface between local regions of wüstite and magnetite, with a rate controlling step determined by the diffusion of iron.

Monolayer Iron Carbide Films on Au(111) as a Fischer–Tropsch Model Catalyst

DEFF Research Database (Denmark)

Mannie, Gilbère; Lammich, Lutz; Li, Yong-Wang

2014-01-01

-temperature exposure of Fe islands gas to C2H4 deposited on the clean Au(111) surface results in partly converted Fe/FexCy islands. Multistep flash-heating treatment of the partly converted Fe/FexCy islands at 523 and 773 K results in pure highly crystalline FexCy islands with in-plane nearest-neighbor distances of 0...

Nonlinear roll damping of a barge with and without liquid cargo in spherical tanks

Directory of Open Access Journals (Sweden)

Wenhua Zhao

2016-01-01

Full Text Available Damping plays a significant role on the maximum amplitude of a vessel's roll motion, in particular near the resonant frequency. It is a common practice to predict roll damping using a linear radiation–diffraction code and add that to a linearized viscous damping component, which can be obtained through empirical, semi-empirical equations or free decay tests in calm water. However, it is evident that the viscous roll damping is nonlinear with roll velocity and amplitude. Nonlinear liquid cargo motions inside cargo tanks also contribute to roll damping, which when ignored impedes the accurate prediction of maximum roll motions. In this study, a series of free decay model tests is conducted on a barge-like vessel with two spherical tanks, which allows a better understanding of the nonlinear roll damping components considering the effects of the liquid cargo motion. To examine the effects of the cargo motion on the damping levels, a nonlinear model is adopted to calculate the damping coefficients. The liquid cargo motion is observed to affect both the linear and the quadratic components of the roll damping. The flow memory effect on the roll damping is also studied. The nonlinear damping coefficients of the vessel with liquid cargo motions in spherical tanks are obtained, which are expected to contribute in configurations involving spherical tanks.

Hazardous materials transportation and emergency response programs

International Nuclear Information System (INIS)

Joy, D.S.; Fore, C.S.

1983-01-01

This presentation consists of the following visual aids; (1) detailed routing capabilities of truck, rail, barge; (2) legislative data base for hazardous materials; and (3) emergency response of accident site Eddyville, Kentucky (airports in vicinity of Eddyville, KY)

Improvement of effect of water-in-oil microemulsion as an oral delivery system for fexofenadine: in vitro and in vivo studies

Directory of Open Access Journals (Sweden)

Gundogdu E

2011-08-01

Full Text Available E Gundogdu1,2, I Gonzalez Alvarez3, E Karasulu1,21Faculty of Pharmacy, Department of Biopharmaceutics and Pharmacokinetics, 2Center For Drug Research and Development and Pharmacokinetic Applications, Ege University, Izmir, Turkey; 3Faculty of Pharmacy, Department of Engineering, Pharmaceutical Technical Section, Research Group on Drug Absorption, Universidad Miguel Hernández, Alicante, SpainAbstract: Fexofenadine (FEX has high solubility and low permeability (BCS, Class III. In this work, novel FEX loaded water in oil microemulsion (w/o was designed to improve bioavailability and compared with Fexofen® syrup in in vitro and in vivo studies. In addition, pharmacokinetic parameters in permeability studies were estimated by using WinNonLin software program. w/o microemulsion system was optimized using a pseudoternary phase diagram, composed of span 80/lutrol F 68 (9.5:0.5 w/w, oleic acide, isopropyl alcohol and water as surfactant mixture; oil and cosurfactant was developed for oral drug delivery. w/o microemulsion systems were characterized by phase behavior, particle size, viscosity and solubilization capacity. In vitro studies were studied using Caco-2 cell monolayer. Pharmacokinetic parameters of w/o microemulsion were investigated in rabbits and compared to Fexofen® syrup. Fexofen® syrup and microemulsion were administered by oral gavage at 6 mg/kg of the same concentration. The experimental results indicated that microemulsion (HLB = 5.53 formed nanometer sized droplets (33.29 ± 1.76 and had good physical stability. This microemulsion increased the oral bioavailability of FEX which was highly water-soluble but fairly impermeable. The relative bioavailability of FEX microemulsion was about 376.76% compared with commercial syrup in rabbits. In vitro experiments were further employed for the enhanced effect of the microemulsion for FEX. These results suggest that novel w/o microemulsion plays an important role in enhancing oral

Intraoperative Subcortical Electrical Mapping of the Optic Tract in Awake Surgery Using a Virtual Reality Headset.

Science.gov (United States)

Mazerand, Edouard; Le Renard, Marc; Hue, Sophie; Lemée, Jean-Michel; Klinger, Evelyne; Menei, Philippe

2017-01-01

Brain mapping during awake craniotomy is a well-known technique to preserve neurological functions, especially the language. It is still challenging to map the optic radiations due to the difficulty to test the visual field intraoperatively. To assess the visual field during awake craniotomy, we developed the Functions' Explorer based on a virtual reality headset (FEX-VRH). The impaired visual field of 10 patients was tested with automated perimetry (the gold standard examination) and the FEX-VRH. The proof-of-concept test was done during the surgery performed on a patient who was blind in his right eye and presenting with a left parietotemporal glioblastoma. The FEX-VRH was used intraoperatively, simultaneously with direct subcortical electrostimulation, allowing identification and preservation of the optic radiations. The FEX-VRH detected 9 of the 10 visual field defects found by automated perimetry. The patient who underwent an awake craniotomy with intraoperative mapping of the optic tract using the FEX-VRH had no permanent postoperative visual field defect. Intraoperative visual field assessment with the FEX-VRH during direct subcortical electrostimulation is a promising approach to mapping the optical radiations and preventing a permanent visual field defect during awake surgery for epilepsy or tumor. Copyright © 2016 Elsevier Inc. All rights reserved.

Synthesis of the Results of the Field Verification Program Upland Disposal Alternative

National Research Council Canada - National Science Library

Folsom, Bobby

1998-01-01

...) procedures for predicting potential contaminant mobility into animals. The upland disposal site was constructed within a protected area using conventional construction techniques and was hydraulically filled from barges...

The multi-task barge: a floating deep-sea production, storage and unloading unit, with surface production heads and drilling installations; La barge multifonctions: une unite flottante de production, de stockage et dechargement en eau profonde, avec tetes de production en surface et installations de forage

Energy Technology Data Exchange (ETDEWEB)

Valenchon, C; Rossig, J H [Bouygues Offshore (France); Pouget, G [Sedco-Forex (France); Biolley, F [Institut Francais du Petrole, 92 - Rueil-Malmaison (France)

1998-05-01

The multi-task barge is devoted to the exploitation of deep-sea fields in rather good conditions. It has been designed to bring together within a single installation, a production, storage and unloading unit and the necessary means for the drilling, the connecting and the work-over of wells. Thus submarine well-heads and well-head platforms are no longer needed. When the field configuration or the use of oriented drillings allows to group several wells together, the multi-task platform allows to use more economical surface production heads installed on steel rigid risers. This concept requires less investments thanks to less expensive drilling operations and restricted submarine installations, and to easier well operations and lower exploitation costs. Crude oil storage is ensured to up to about 2 millions of barrels. This paper presents the design aspects and the dynamical analysis of risers with the methods used. The tensioning and mooring system is examined and the advantages of the cylindrical float system is underlined and compared to the classical hydro-pneumatic systems. (J.S.) 11 refs.

77 FR 73455 - Change to the Military Freight Carrier Registration Program (FCRP)

Science.gov (United States)

2012-12-10

... (common, contract, logistics, freight forwarders, and brokers). This does not apply to registration of air, rail, ocean, pipeline, barge, international, and household goods TSPs. This update will be included in...

Eukaryotic resistance to fluoride toxicity mediated by a widespread family of fluoride export proteins.

Science.gov (United States)

Li, Sanshu; Smith, Kathryn D; Davis, Jared H; Gordon, Patricia B; Breaker, Ronald R; Strobel, Scott A

2013-11-19

Fluorine is an abundant element and is toxic to organisms from bacteria to humans, but the mechanisms by which eukaryotes resist fluoride toxicity are unknown. The Escherichia coli gene crcB was recently shown to be regulated by a fluoride-responsive riboswitch, implicating it in fluoride response. There are >8,000 crcB homologs across all domains of life, indicating that it has an important role in biology. Here we demonstrate that eukaryotic homologs [renamed FEX (fluoride exporter)] function in fluoride export. FEX KOs in three eukaryotic model organisms, Neurospora crassa, Saccharomyces cerevisiae, and Candida albicans, are highly sensitized to fluoride (>200-fold) but not to other halides. Some of these KO strains are unable to grow in fluoride concentrations found in tap water. Using the radioactive isotope of fluoride, (18)F, we developed an assay to measure the intracellular fluoride concentration and show that the FEX deletion strains accumulate fluoride in excess of the external concentration, providing direct evidence of FEX function in fluoride efflux. In addition, they are more sensitive to lower pH in the presence of fluoride. These results demonstrate that eukaryotic FEX genes encode a previously unrecognized class of fluoride exporter necessary for survival in standard environmental conditions.

Challenges and Performance of the Frontier Technology Applied to an ATLAS Phase-I Calorimeter Trigger Board Dedicated to the Jet Identification

CERN Document Server

Kahra, Christian; The ATLAS collaboration

2017-01-01

The '{Phase-I}' upgrade of the Large Hadron Collider (LHC), scheduled to be completed in 2021, will lead to an enhanced collision luminosity of $2.5 \\times 10^{34} \\, \\mathrm{cm}^{-2} \\, \\mathrm{s}^{-1}$. To cope with the new and challenging accelerator conditions, all the CERN experiments have planned a major detector upgrade to be installed during the associated experimental shutdown period. One of the physics goals of the ATLAS experiment is to maintain sensitivity to electroweak processes despite the increased number of interactions per LHC bunch crossing. To this end, the component of the first level hardware trigger based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature EXtractors (FEXs), which each uses different physics objects for trigger selection. There will be three FEX systems in total, with this contribution focusing on the first prototype of the jet FEX (jFEX). This system identifies jets and large area tau candidates while also calculating ...

Studies on the response of soil microflora to the application of the fungicide fenhexamid

DEFF Research Database (Denmark)

El Azhari, Najoi

2007-01-01

The aim of this work was to evaluate the impact of the fungicide fenhexamid (FEX) on the genetic structure of soil bacterial communities using the Ribosomal Intergenic Spacer Analysis molecular technique. Using real-time PCR, we also tried to quantify the pcaH sequences which encode...... the dioxygenases involved in the degradation process of a variety of aromatic compounds. Soil taken from a vineyard in the Etna Park (Sicily, Italy) was treated with FEX in the ratio 2 µg g-1 soil every 7 days, the process being repeated four times. The analyses were carried out before treatment and 7 days after...... each further application of FEX. At the same time, the degradation rate was evaluated. The use of FEX determined a variation in the bacterial component of the soil which could be seen in an increase of some microbial strains and the inhibition of others. The pcaH sequence was already present...

Draft genomic sequencing of six potential extraintestinal pathogenic Escherichia coli isolates from retail chicken meat.

Science.gov (United States)

Potential Extraintestinal pathogenic Escherichia coli isolates DP254, WH333, WH398, F356, FEX675 and FEX725 were isolated from retail chicken meat products. Here, we report the draft genome sequences for these six E. coli isolates, which are currently being used in food safety research....

A new high speed, Ultrascale+ based board for the ATLAS jet calorimeter trigger system

CERN Document Server

Rocco, Elena; The ATLAS collaboration

2018-01-01

To cope with the enhanced luminosity at the Large Hadron Collider (LHC) in 2021, the ATLAS collaboration is planning a major detector upgrade. As a part of this, the Level 1 trigger based on calorimeter data will be upgraded to exploit the fine granularity readout using a new system of Feature EXtractors (FEX), which each reconstruct different physics objects for the trigger selection. The jet FEX (jFEX) system is conceived to provide jet identification (including large area jets) and measurements of global variables within a latency budget of less then 400ns. It consists of 6 modules. A single jFEX module is an ATCA board with 4 large FPGAs of the Xilinx Ultrascale+ family, that can digest a total input data rate of ~3.6 Tb/s using up to 120 Multi Gigabit Transceiver (MGT), 24 electrical optical devices, board control and power on the mezzanines to allow flexibility in upgrading controls functions and components without affecting the main board. The 24-layers stack-up was carefully designed to preserve the s...

A new high speed, Ultrascale+ based board for the ATLAS jet calorimeter trigger system

CERN Document Server

Rocco, Elena; The ATLAS collaboration

2018-01-01

A new high speed Ultrascale+ based board for the ATLAS jet calorimeter trigger system To cope with the enhanced luminosity at the Large Hadron Collider (LHC) in 2021, the ATLAS collaboration is planning a major detector upgrade. As a part of this, the Level 1 trigger based on calorimeter data will be upgraded to exploit the fine granularity readout using a new system of Feature EXtractors (FEX), which each reconstruct different physics objects for the trigger selection. The jet FEX (jFEX) system is conceived to provide jet identification (including large area jets) and measurements of global variables within a latency budget of less then 400ns. It consists of 6 modules. A single jFEX module is an ATCA board with 4 large FPGAs of the Xilinx Ultrascale+ family, that can digest a total input data rate of ~3.6 Tb/s using up to 120 Multi Gigabit Transceiver (MGT), 24 electrical optical devices, board control and power on the mezzanines to allow flexibility in upgrading controls functions and components without aff...

Challenges and performance of the frontier technology applied to an ATLAS Phase-I calorimeter trigger board dedicated to the jet identification

CERN Document Server

Kahra, Christian; The ATLAS collaboration

2017-01-01

The 'Phase-I' upgrade of the Large Hadron Collider (LHC), scheduled to be completed in 2021, will lead to an enhanced collision luminosity of 2.5x10e34cm-2s-1. To cope with the new and challenging accelerator conditions, all the CERN experiments have planned a major detector upgrade to be installed during the associated experimental shutdown period. One of the physics goals of the ATLAS experiment is to maintain sensitivity to electroweak processes despite the increased number of interactions per LHC bunch crossing. To this end, the component of the first level hardware trigger based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature EXtractors (FEXs), which each uses different physics objects for trigger selection. There will be three FEX systems in total, with this contribution focusing on the first prototype of the jet FEX (jFEX). This system identifies jets and large area tau candidates while also calculating global variables such as transverse energy su...

Transition Metal Dopants Essential for Producing Ferromagnetism in Metal Oxide Nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Johnson, Lydia; Thurber, Aaron P.; Anghel, Josh; Sabetian, Maryam; Engelhard, Mark H.; Tenne, D.; Hanna, Charles; Punnoose, Alex

2010-08-13

Recent claims that ferromagnetism can be produced in nanoparticles of metal oxides without the presence of transition metal dopants has been refuted in this work by investigating 62 high quality well-characterized nanoparticle samples of both undoped and Fe doped (0-10% Fe) ZnO. The undoped ZnO nanoparticles showed zero or negligible magnetization, without any dependence on the nanoparticle size. However, chemically synthesized Zn₁₋xFexO nanoparticles showed clear ferromagnetism, varying systematically with Fe concentration. Furthermore, the magnetic properties of Zn₁₋xFexO nanoparticles showed strong dependence on the reaction media used to prepare the samples. The zeta potentials of the Zn₁₋xFexO nanoparticles prepared using different reaction media were significantly different, indicating strong differences in the surface structure. Electron paramagnetic resonance studies clearly showed that the difference in the ferromagnetic properties of Zn₁₋xFexO nanoparticles with different surface structures originate from differences in the fraction of the doped Fe³⁺ ions that are coupled ferromagnetically.

Effects of alloying elements (Mn, Co, Al, W, Sn, B, C and S) on biodegradability and in vitro biocompatibility of pure iron.

Science.gov (United States)

Liu, B; Zheng, Y F

2011-03-01

Pure iron was determined to be a valid candidate material for biodegradable metallic stents in recent animal tests; however, a much faster degradation rate in physiological environments was desired. C, Mn, Si, P, S, B, Cr, Ni, Pb, Mo, Al, Ti, Cu, Co, V and W are common alloying elements in industrial steels, with Cr, Ni, Mo, Cu, Ti, V and Si being acknowledged as beneficial in enhancing the corrosion resistance of iron. The purpose of the present work (using Fe-X binary alloy models) is to explore the effect of the remaining alloying elements (Mn, Co, Al, W, B, C and S) and one detrimental impurity element Sn on the biodegradability and biocompatibility of pure iron by scanning electron microscopy, X-ray diffraction, metallographic observation, tensile testing, microhardness testing, electrochemical testing, static (for 6 months) and dynamic (for 1 month with various dissolved oxygen concentrations) immersion testing, cytotoxicity testing, hemolysis and platelet adhesion testing. The results showed that the addition of all alloying elements except for Sn improved the mechanical properties of iron after rolling. Localized corrosion of Fe-X binary alloys was observed in both static and dynamic immersion tests. Except for the Fe-Mn alloy, which showed a significant decrease in corrosion rate, the other Fe-X binary alloy corrosion rates were close to that of pure iron. It was found that compared with pure iron all Fe-X binary alloys decreased the viability of the L929 cell line, none of experimental alloying elements significantly reduced the viability of vascular smooth muscle cells and all the elements except for Mn increased the viability of the ECV304 cell line. The hemolysis percentage of all Fe-X binary alloy models were less than 5%, and no sign of thrombogenicity was observed. In vitro corrosion and the biological behavior of these Fe-X binary alloys are discussed and a corresponding mechanism of corrosion of Fe-X binary alloys in Hank's solution proposed. As a

The role of iron in tetrahedrite and tennantite determined by Rietveld refinement of neutron powder diffraction data

DEFF Research Database (Denmark)

Andreasen, Jens Wenzel; Makovicky, Emil; Lebech, Bente

2008-01-01

Rietveld refinement of neutron powder diffraction data on four samples of synthetic, iron-bearing tetrahedrite (Cu12-xFexSb4S13) with x = 0.28, 0.69, 0.91, 2.19 and four samples of synthetic tennantite (Cu12-xFexAs4S13) with x = 0.33, 0.38, 0.86, 1.5 indicate unambiguously that iron is incorporated...

By ship, by barge, by truck : massive Kearl modules to take a new route from South Korea to Alberta via Idaho and Montana highways

Energy Technology Data Exchange (ETDEWEB)

Jaremko, D.

2010-03-15

Idaho and Montana highways will be used to transport massive oil sands modules for Imperial Oil's Kearl oilsands project. A test module will pass through the states in mid 2010. The local highway patrol will be contracted as an escort in order to reduce the risk of incidents with local drivers. The modules will be shipped from South Korea to Portland and then transported by barge to Lewiston, Idaho. The modules will then be loaded onto trucks and transported along the highway. It will take approximately 10 days to move the modules to the Kearl site near Fort McMurray, Alberta. The loads are so large that they will not fit through rail tunnels or highway overpasses. Imperial Oil will be required to bury some overhead power transmission lines and build approximately 100 pullouts along the route. Traffic signal arms will also be modified to swing out of the way as the loads are passing through. Construction of the Kearl site will be completed by 2012. 2 figs.

Structure, microstructure and microhardness of rapidly solidified Smy(FexNi1-x)4Sb12 (x = 0.45, 0.50, 0.70, 1) thermoelectric compounds

Science.gov (United States)

Artini, C.; Castellero, A.; Baricco, M.; Buscaglia, M. T.; Carlini, R.

2018-05-01

Skutterudites are interesting compounds for thermoelectric applications. The main drawback in the synthesis of skutterudites by solidification of the melt is the occurrence of two peritectic reactions requiring long annealing times to form a single phase. Aim of this work is to investigate an alternative route for synthesis, based on rapid solidification by planar flow casting. The effect of cooling rate on phases formation and composition, as well as on structure, microstructure and mechanical properties of the filled Smy(FexNi1-x)4Sb12 (x = 0.45, 0.50, 0.70, 1) skutterudites was studied. Conversely to slowly cooled ingots, rapidly quenched ribbons show skutterudite as the main phase, suggesting that deep undercooling of the liquid prevents the nucleation of high temperature phases, such as (Fe,Ni)Sb and (Fe,Ni)Sb2. In as-quenched samples, a slightly out of equilibrium Sm content is revealed, which does not alter the position of the p/n boundary; nevertheless, it exerts an influence on crystallographic properties, such as the cell parameter and the shape of the Sb4 rings in the structure. As-quenched ribbons show a fine microstructure of the skutterudite phase (grain size of 2-20 μm), which only moderately coarsens after annealing at 873 K for 4 days. Vickers microhardness values (350-400 HV) of the skutterudite phase in as-quenched ribbons are affected by the presence of softer phases (i.e. Sb), which are homogeneously and finely dispersed within the sample. The skutterudite hardens after annealing as a consequence of a moderate grain growth, which limits the matrix effect due to the presence of additional phases.

Description of from-reactor transportation cask designs

International Nuclear Information System (INIS)

Lake, W.H.

1990-01-01

This paper describes two from-reactor cask development program contracts. They are a contract for legal weight truck cask designs, and a contract for a rail/barge cask design. The paper also presents several general considerations affecting the cask development program. Two of these which are covered in some detail are the technical topics of burnup credit and source term evaluation

46 CFR 11.205 - Requirements for original officer endorsements and STCW endorsements.

Science.gov (United States)

2010-10-01

... United States by birth. (3) Experience and service acquired on foreign vessels is creditable for... endorsement as offshore installation manager, barge supervisor, or ballast control operator, at least one...) Where an applicant qualifies for an endorsement through an approved training school or program, one of...

Eukaryotic resistance to fluoride toxicity mediated by a widespread family of fluoride export proteins

OpenAIRE

Li, Sanshu; Smith, Kathryn D.; Davis, Jared H.; Gordon, Patricia B.; Breaker, Ronald R.; Strobel, Scott A.

2013-01-01

Although fluoride is plentiful in the environment and is commonly used at high concentrations in oral hygiene products, little has been known about how biological systems overcome the toxic effects of this anion. We demonstrate that a protein called FEX in many fungi is essential for cell survival in the presence of high fluoride concentrations. The protein is required for the rapid expulsion of cytoplasmic fluoride, indicating that many eukaryotic species that carry FEX genes likely avoid fl...

Impact of solvent mixture on iron nanoparticles generated by laser ablation

Science.gov (United States)

Chakif, M.; Prymak, O.; Slota, M.; Heintze, E.; Gurevich, E. L.; Esen, C.; Bogani, L.; Epple, M.; Ostendorf, A.

2014-03-01

The present work reveals the structural and magnetic properties of iron oxide (FexOy) nanoparticles (NPs) prepared by femtosecond laser ablation. The FexOy-NPs were produced in solutions consisting of different ratios of water and acetone. Laser ablation in water yields agglomerates and that in acetone yields chain structures whereas that in water/acetone show a mixture of both. We observe significant fabrication dependent properties such as different crystallinities and magnetic behaviors. The structural characterization shows a change from iron (Fe) to a FexOy state of the NPs which depends on the solution composition. Furthermore, transmission electron microscopy measurements exhibit a broad particle size distribution in all samples but with significant differences in the mean sizes. Using magnetic measurements we show that nanoparticles fabricated in pure acetone have lower coercive fields which come along with a smaller mean particle size and therefore increasing superparamagnetic behavior.

Lower Granite Dam Smolt Monitoring Program, 2005-2006 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Mensik, Fred; Rapp, Shawn; Ross, Doug (Washington Department of Fish and Wildlife, Olympia, WA)

2007-01-01

The 2005 fish collection season at Lower Granite Dam (LGR) was characterized by average water temperatures, below average flows, above average spill, low levels of debris and the record number of smolts collected compared to the previous five years. With the continued release of unclipped supplementation chinook and steelhead above LGR, we cannot accurately distinguish wild chinook, steelhead, and sockeye/kokanee in the sample. For the purposes of this report we will designate fish as clipped and unclipped. This season a total of 13,030,967 juvenile salmonids were collected at LGR. Of these, 12,099,019 were transported to release sites below Bonneville Dam, 12,032,623 by barge and 66,396 by truck. An additional 898,235 fish were bypassed to the river due to over-capacity of the raceways, barges or trucks and for research purposes. This was the first season of summer spill at LGR. Spill was initiated at 12:01am June 20 as directed by the ruling set forth by Judge James Redden of the United States District Court (Order CV 01-640-RE). In addition, the Lower Granite project also conducted a summer spill test alternating spill and spill patterns between spill to the gas cap without the removable spillway weir (RSW) and spill with up to 20 kcfs utilizing the RSW. Because of the forecast low flow this year, most hatchery reared subyearling fall chinook were released up to three weeks early. With the unexpected high flows in late May and early June, more than 90% of the subyearling chinook were collected prior to the initiation of the court ordered summer spill program. Collection number fluctuations reflect river flow and project operations for any given year. For example, low flow years (2001, 2004 and 2005) result in higher collection numbers. Court ordered spill throughout the summer migration will directly affect collection of fall subyearling chinook collection numbers. The editors of this report urge the reader to use caution when comparing fish collection numbers

Lower Granite Dam Smolt Monitoring Program, Annual Report 2005-2006.

Energy Technology Data Exchange (ETDEWEB)

Menski, Fred

2007-01-01

The 2005 fish collection season at Lower Granite Dam (LGR) was characterized by average water temperatures, below average flows, above average spill, low levels of debris and the record number of smolts collected compared to the previous five years. With the continued release of unclipped supplementation chinook and steelhead above LGR, we cannot accurately distinguish wild chinook, steelhead, and sockeye/kokanee in the sample. For the purposes of this report we will designate fish as clipped and unclipped. This season a total of 13,030,967 juvenile salmonids were collected at LGR. Of these, 12,099,019 were transported to release sites below Bonneville Dam, 12,032,623 by barge and 66,396 by truck. An additional 898,235 fish were bypassed to the river due to over-capacity of the raceways, barges or trucks and for research purposes. This was the first season of summer spill at LGR. Spill was initiated at 12:01am June 20 as directed by the ruling set forth by Judge James Redden of the United States District Court (Order CV 01-640-RE). In addition, the Lower Granite project also conducted a summer spill test alternating spill and spill patterns between spill to the gas cap without the removable spillway weir (RSW) and spill with up to 20 kcfs utilizing the RSW. Because of the forecast low flow this year, most hatchery reared subyearling fall chinook were released up to three weeks early. With the unexpected high flows in late May and early June, more than 90% of the subyearling chinook were collected prior to the initiation of the court ordered summer spill program. Collection number fluctuations reflect river flow and project operations for any given year. For example, low flow years (2001, 2004 and 2005) result in higher collection numbers. Court ordered spill throughout the summer migration will directly affect collection of fall subyearling chinook collection numbers. The editors of this report urge the reader to use caution when comparing fish collection numbers

Baseline Environmental Analysis Report for the K-1251 Barge Facility at the East Tennessee Technology Park, Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

Van Winkle J.E.

2007-08-24

This report documents the baseline environmental conditions of the U. S. Department of Energy's (DOE's) K-1251 Barge Facility, which is located at the East Tennessee Technology Park (ETTP). DOE is proposing to lease the facility to the Community Reuse Organization of East Tennessee (CROET). This report provides supporting information for the use, by a potential lessee, of government-owned facilities at ETTP. This report is based upon the requirements of Sect. 120(h) of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). The lease footprint is slightly over 1 acre. The majority of the lease footprint is defined by a perimeter fence that surrounds a gravel-covered area with a small concrete pad within it. Also included is a gravel drive with locked gates at each end that extends on the east side to South First Avenue, providing access to the facility. The facility is located along the Clinch River and an inlet of the river that forms its southern boundary. To the east, west, and north, the lease footprint is surrounded by DOE property. Preparation of this report included the review of government records, title documents, historic aerial photos, visual and physical inspections of the property and adjacent properties, and interviews with current and former employees involved in the operations on the real property to identify any areas on the property where hazardous substances and petroleum products or their derivatives and acutely hazardous wastes were known to have been released or disposed. Radiological surveys were conducted and chemical samples were collected to assess the facility's condition.

Testing the stability of magnetic iron oxides/kaolinite nanocomposite under various pH conditions

Science.gov (United States)

Tokarčíková, Michaela; Tokarský, Jonáš; Kutláková, Kateřina Mamulová; Seidlerová, Jana

2017-09-01

Magnetically modified clays containing iron oxides nanoparticles (FexOy NPs) are low-cost and environmentally harmless materials suitable for sorption of pollutants from wastewaters. Stability of this smart material was evaluated both experimentally and theoretically using molecular modelling. Original kaolinite and prepared FexOy/kaolinite nanocomposite were characterized using X-ray fluorescence spectroscopy, X-ray powder diffraction, infrared spectroscopy, and transmission electron microscopy, and the stability was studied using leaching tests performed according to the European technical standard EN 12457-2 in deionized water and extraction agents with varying pH (2, 4, 9, and 11). The influence of pH on amount of FexOy NPs released from the composite and amount of the basic elements released from the kaolinite structure was studied using inductively coupled plasma atomic emission spectroscopy. All experiments proved that the magnetic properties of the nanocomposite will not change even after leaching in extraction agents with various pH.

Optimising a parallel conjugate gradient solver

Energy Technology Data Exchange (ETDEWEB)

Field, M.R. [O`Reilly Institute, Dublin (Ireland)

1996-12-31

This work arises from the introduction of a parallel iterative solver to a large structural analysis finite element code. The code is called FEX and it was developed at Hitachi`s Mechanical Engineering Laboratory. The FEX package can deal with a large range of structural analysis problems using a large number of finite element techniques. FEX can solve either stress or thermal analysis problems of a range of different types from plane stress to a full three-dimensional model. These problems can consist of a number of different materials which can be modelled by a range of material models. The structure being modelled can have the load applied at either a point or a surface, or by a pressure, a centrifugal force or just gravity. Alternatively a thermal load can be applied with a given initial temperature. The displacement of the structure can be constrained by having a fixed boundary or by prescribing the displacement at a boundary.

Intermodal transportation of spent fuel

International Nuclear Information System (INIS)

Elder, H.K.

1983-09-01

Concepts for transportation of spent fuel in rail casks from nuclear power plant sites with no rail service are under consideration by the US Department of Energy in the Commercial Spent Fuel Management program at the Pacific Northwest Laboratory. This report identifies and evaluates three alternative systems for intermodal transfer of spent fuel: heavy-haul truck to rail, barge to rail, and barge to heavy-haul truck. This report concludes that, with some modifications and provisions for new equipment, existing rail and marine systems can provide a transportation base for the intermodal transfer of spent fuel to federal interim storage facilities. Some needed land transportation support and loading and unloading equipment does not currently exist. There are insufficient shipping casks available at this time, but the industrial capability to meet projected needs appears adequate

Ion Association Methods for the Determination of Fexofenadine in Pharmaceutical Preparations

Directory of Open Access Journals (Sweden)

L. D. Srinivas

2005-01-01

Full Text Available Two simple and sensitive Visible spectrophotometric methods (A and B for the determination of Fexofenadine (FEX in bulk sample and pharmaceutical formulations are described. Methods A and B are based on the formation of ion-association complex involving carboxylic acid group of FEX and the basic dyes, Safranin-O (SFN-O, method A, methylene blue (MB, method B. The results obtained in the above two methods are reproducible and are statistically validated and found to be suitable for the assay of Fexofenadine in bulk and its pharmaceutical formulations.

Moessbauer effect studies of magnetic interactions in iron and dilute iron alloys

International Nuclear Information System (INIS)

Woude, F. van der; Schurer, P.J.; Sawatzky, G.A.

1975-01-01

A temperature-dependent Moessbauer study was conducted in FeX alloys, where X = Al, Si, Ti, V, Cr, Mn, Co, and Ni, aimed at solving the problem of 'what is localized and what is itinerant in iron ferromagnetism'. The experimental results are interpreted using a phenomenological model based on a modified Zener-Vonsovskij theory. Absorption spectra of FeX alloys were measured as a function of temperature. It was found that the 3d magnetic moments in iron were mainly localized while exchange coupling was provided by partly itinerant 3d electrons. (L.D.)

Inter-terminal transfer between port terminals. A continuous mathematical programming model to optimize scheduling and deployment of transport units

Energy Technology Data Exchange (ETDEWEB)

Morales Fusco, P.; Pedrielli, G.; Zhou, C.; Hay Lee, L.; Peng Chew, E.

2016-07-01

In most large port cities, the challenge of inter-terminal transfers (ITT) prevails due to the long distance between multiple terminals. The quantity of containers requiring movement between terminals as they connect from pre-carrier to on-carrier is increasing with the formation of the mega-alliances. The paper proposes a continuous time mathematical programming model to optimize the deployment and schedule of trucks and barges to minimize the number of operating transporters, their makespan, costs and the distance travelled by the containers by choosing the right combination of transporters and container movements while fulfilling time window restrictions imposed on reception of the containers. A multi-step routing problem is developed where transporters can travel from one terminal to another and/or load or unload containers from a specific batch at each step. The model proves successful in identifying the costless schedule and means of transportation. And a sensibility analysis over the parameters used is provided. (Author)

From automatic control of vessels designed to operate in offshore conditions to automatic control of a large barge convoy in a river/channel: lessons learned; Do controle automatico de embarcacoes projetadas para condicoes operacionais de offshore para o controle automatico de um grande comboio de barcacas em um rio/canal: licoes aprendidas

Energy Technology Data Exchange (ETDEWEB)

Pontes, Anselmo Carvalho [Symmetry Ltda., Rio de Janeiro, RJ (Brazil); Santos, Edson Mesquita do [Marinha do Brasil, Rio de Janeiro, RJ (Brazil)

2008-07-01

The waterway transportation sector, despite its problems and bottlenecks, is continually seeking alternatives to improve its operations. With goals of increased efficiency, safety and cost reduction, the sector is modernizing and acquiring new technology. The Dynamic Position control system for a large barge convoy is one of the new technology highlights. This innovation may make development in the Brazilian waterway transportation sector feasible by permitting navigational safety and greater flexibility in transport and distribution not only for mined products but for petroleum and its derivatives. This paper presents the development process of The Dynamic Position control system for a large barge convoy in the Parana-Paraguay River, for Rio Tinto Mining Company. The hydrodynamics effects in a river are quite different than those of the traditional offshore environment. The degree of difficulty involved in solving this problem is highly dependent on a ship's characteristics, which can be analyzed in function of their hydrodynamic coefficients. Model tests in towing tanks were made to adjust the hydrodynamic coefficients and characteristics of the thrusters. The choice of the 'backstepping' control law and observer (state estimator) presented in this paper is a result of these particular conditions. The authors point out the advantage of using this technique, since all the properties of the coefficients of the hull, propeller(s) and thruster(s) have already been tested and tuned and are able to make a reliable set-up that optimizes navigation in restricted waterways. (author)

Method and apparatus for disposing a radioactive waste container to submarine bottom

International Nuclear Information System (INIS)

Shibata, Kiyoshi; Yoshida, Shoichi.

1980-01-01

Purpose: To completely eliminate a danger occurred by the rolling of a hull in the ocean in a method and apparatus for disposing radioactive waste container to submarine bottom by independently handling the radioactive waste containers when loading the container in a compartment carried on a barge and sinking the containers together with the compartment to the submarine bottom at its disposing time. Method: Radioactive waste containers are carried into a compartment loaded on a barge floating completely, and the barge is then applied with external force thereto by a ship or the like and sailed to the marine disposal area. Then, water is filled in the ballast tank of the barge to submerge the barge, the compartment is floated and separated from the containers, and water is charged into the compartment to sink the compartment. (Aizawa, K.)

Amending the Oil Pollution Act of 1990 for state implementation of program elements

International Nuclear Information System (INIS)

Pearson, L.

1997-01-01

A legal argument was made in favour of amending the Oil Pollution Act (OPA) of 1990 to allow state implementation of a portion or portions of the law. As it now stands the OPA does not have language for delegating program elements to the states. A review of the legislation indicated that a number of program elements may be more effectively carried out by the State of Alaska, while others should continue to be administered by both the federal and state governments. The review and approval of industry contingency plans for manned and unmanned vessels/barges carrying oil as a primary cargo is one example where efficiencies may be gained. Such plans are currently submitted to Coast Guard headquarters in Washington and retained there. In effect, there is no 'local' federal knowledge of the vessel response plans approved for operation in the State of Alaska, nor do Alaskans have the opportunity to review or comment on the adequacy of these plans. Components where efficiencies would be gained include: local review of industry contingency/ response plans, inventory of existing rural above-ground tank farms, coordination of vessel and facility inspections, area contingency plan development and access to federal clean up funds. Past experience clearly indicates that delegation to the states is a workable proposition. There is no apparent justification for not extending this provision to the OPA, not as a mandate, but as an option for reducing cost and improving efficiency. 28 refs

Amending the Oil Pollution Act of 1990 for state implementation of program elements

Energy Technology Data Exchange (ETDEWEB)

Pearson, L. [Alaska Dept. of Environmental Conservation, Juneau, AK (United States)

1997-10-01

A legal argument was made in favour of amending the Oil Pollution Act (OPA) of 1990 to allow state implementation of a portion or portions of the law. As it now stands the OPA does not have language for delegating program elements to the states. A review of the legislation indicated that a number of program elements may be more effectively carried out by the State of Alaska, while others should continue to be administered by both the federal and state governments. The review and approval of industry contingency plans for manned and unmanned vessels/barges carrying oil as a primary cargo is one example where efficiencies may be gained. Such plans are currently submitted to Coast Guard headquarters in Washington and retained there. In effect, there is no `local` federal knowledge of the vessel response plans approved for operation in the State of Alaska, nor do Alaskans have the opportunity to review or comment on the adequacy of these plans. Components where efficiencies would be gained include: local review of industry contingency/ response plans, inventory of existing rural above-ground tank farms, coordination of vessel and facility inspections, area contingency plan development and access to federal clean up funds. Past experience clearly indicates that delegation to the states is a workable proposition. There is no apparent justification for not extending this provision to the OPA, not as a mandate, but as an option for reducing cost and improving efficiency. 28 refs.

The effects of voluntary, involuntary, and forced exercises on brain-derived neurotrophic factor and motor function recovery: a rat brain ischemia model.

Directory of Open Access Journals (Sweden)

Zheng Ke

Full Text Available BACKGROUND: Stroke rehabilitation with different exercise paradigms has been investigated, but which one is more effective in facilitating motor recovery and up-regulating brain neurotrophic factor (BDNF after brain ischemia would be interesting to clinicians and patients. Voluntary exercise, forced exercise, and involuntary muscle movement caused by functional electrical stimulation (FES have been individually demonstrated effective as stroke rehabilitation intervention. The aim of this study was to investigate the effects of these three common interventions on brain BDNF changes and motor recovery levels using a rat ischemic stroke model. METHODOLOGY/PRINCIPAL FINDINGS: One hundred and seventeen Sprague-Dawley rats were randomly distributed into four groups: Control (Con, Voluntary exercise of wheel running (V-Ex, Forced exercise of treadmill running (F-Ex, and Involuntary exercise of FES (I-Ex with implanted electrodes placed in two hind limb muscles on the affected side to mimic gait-like walking pattern during stimulation. Ischemic stroke was induced in all rats with the middle cerebral artery occlusion/reperfusion model and fifty-seven rats had motor deficits after stroke. Twenty-four hours after reperfusion, rats were arranged to their intervention programs. De Ryck's behavioral test was conducted daily during the 7-day intervention as an evaluation tool of motor recovery. Serum corticosterone concentration and BDNF levels in the hippocampus, striatum, and cortex were measured after the rats were sacrificed. V-Ex had significantly better motor recovery in the behavioral test. V-Ex also had significantly higher hippocampal BDNF concentration than F-Ex and Con. F-Ex had significantly higher serum corticosterone level than other groups. CONCLUSION/SIGNIFICANCE: Voluntary exercise is the most effective intervention in upregulating the hippocampal BDNF level, and facilitating motor recovery. Rats that exercised voluntarily also showed less

In vivo assessment of the impact of efflux transporter on oral drug absorption using portal vein-cannulated rats.

Science.gov (United States)

Matsuda, Yoshiki; Konno, Yoshihiro; Hashimoto, Takashi; Nagai, Mika; Taguchi, Takayuki; Satsukawa, Masahiro; Yamashita, Shinji

2013-08-01

The purpose of this study was to evaluate the impact of intestinal efflux transporters on the in vivo oral absorption process. Three model drugs-fexofenadine (FEX), sulfasalazine (SASP), and topotecan (TPT)-were selected as P-glycoprotein (P-gp), breast cancer resistance protein (BCRP), and P-gp and BCRP substrates, respectively. The drugs were orally administered to portal vein-cannulated rats after pretreatment with zosuquidar (ZSQ), P-gp inhibitor, and/or Ko143, BCRP inhibitor. Intestinal availability (Fa·Fg) of the drugs was calculated from the difference between portal and systemic plasma concentrations. When rats were orally pretreated with ZSQ, Fa·Fg of FEX increased 4-fold and systemic clearance decreased to 75% of the control. In contrast, intravenous pretreatment with ZSQ did not affect Fa·Fg of FEX, although systemic clearance decreased significantly. These data clearly show that the method presented herein using portal vein-cannulated rats can evaluate the effects of intestinal transporters on Fa·Fg of drugs independently of variable systemic clearance. In addition, it was revealed that 71% of FEX taken up into enterocytes underwent selective efflux via P-gp to the apical surface, while 79% of SASP was effluxed by Bcrp. In the case of TPT, both transporters were involved in its oral absorption. Quantitative analysis indicated a 3.5-fold higher contribution from Bcrp than P-gp. In conclusion, the use of portal vein-cannulated rats enabled the assessment of the impact of efflux transporters on intestinal absorption of model drugs. This experimental system is useful for clarifying the cause of low bioavailability of various drugs.

Design and test performance of the ATLAS Feature Extractor trigger boards for the Phase-I Upgrade

CERN Document Server

Qian, Weiming; The ATLAS collaboration

2016-01-01

In Run 3, the ATLAS Level-1 Calorimeter Trigger will be augmented by an Electron Feature Extractor (eFEX), to identify isolated e/g and t particles, and a Jet Feature Extractor (jFEX), to identify energetic jets and calculate various local energy sums. Each module accommodates more than 420 differential signals that can operate at up to 12.8 Gb/s, some routed over 20 cm between FPGAs. Presented here are the module designs, the processes that have been adopted to meet the challenges associated with multi-Gb/s PCB design, and the results of tests that characterise the performance of these modules.

Design and test performance of the ATLAS Feature Extractor trigger boards for the Phase-1 Upgrade

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00222228; The ATLAS collaboration

2017-01-01

In Run 3, the ATLAS Level-1 Calorimeter Trigger will be augmented by an Electron Feature Extractor (eFEX), to identify isolated e/g and particles, and a Jet Feature Extractor (jFEX), to identify energetic jets and calculate various local energy sums. Each module accommodates more than 450 differential signals that can operate at up to 12.8 Gb/s, some of which are routed over 30 cm between FPGAs. Presented here are the module designs, the processes that have been adopted to meet the challenges associated with multi-Gb/s PCB design, and the results of tests that characterize the performance of these modules.

Thermodynamic modeling of the Sr-Co-Fe-O system

DEFF Research Database (Denmark)

Zhang, Wei Wei; Povoden-Karadeniz, Erwin; Chen, Ming

2016-01-01

This paper reviews and assesses phase equilibria and thermodynamic properties of phases in the Sr-Co-Fe-O system, with a focus on oxides, especially the SrCo1 - xFexO3 - δ perovskite. In our work, the SrCo1 - xFexO3 - δ perovskite was modeled with a three-sublattice model, where the three...... sublattices correspond to the A, B and oxygen sites in an ABO3 perovskite, respectively. A number of other important ternary oxide phases in Sr-Co-O and Sr-Co-Fe-O were also considered. Available thermodynamic and phase diagram data were carefully assessed. A thermodynamic description of Sr-Co-O was derived...

33 CFR 101.105 - Definitions.

Science.gov (United States)

2010-07-01

... the assessment or plan insufficient. Barge means a non-self-propelled vessel (46 CFR 24.10-1). Barge... continual basis after an initial personal identity and credential verification. Registered length means the...

An Optimization Model For Strategy Decision Support to Select Kind of CPO’s Ship

Science.gov (United States)

Suaibah Nst, Siti; Nababan, Esther; Mawengkang, Herman

2018-01-01

The selection of marine transport for the distribution of crude palm oil (CPO) is one of strategy that can be considered in reducing cost of transport. The cost of CPO’s transport from one area to CPO’s factory located at the port of destination may affect the level of CPO’s prices and the number of demands. In order to maintain the availability of CPO a strategy is required to minimize the cost of transporting. In this study, the strategy used to select kind of charter ships as barge or chemical tanker. This study aims to determine an optimization model for strategy decision support in selecting kind of CPO’s ship by minimizing costs of transport. The select of ship was done randomly, so that two-stage stochastic programming model was used to select the kind of ship. Model can help decision makers to select either barge or chemical tanker to distribute CPO.

Beaufort Region Environmental Assessment and Monitoring program (BREAM). Final report for 1992/1993

International Nuclear Information System (INIS)

Vonk, P.; Duval, W.; Thomas, D.

1993-01-01

The Beaufort Region Environmental Assessment and Monitoring (BREAM) program was established to identify environmental research and monitoring priorities related to future hydrocarbon development activities in the Beaufort Sea and Mackenzie Delta region. The activities occurring during the third year of BREAM focused on major oil spills. Three planning meetings were held: a Project Initiation Meeting and technical meetings of the Community-Based Concerns and Catastrophic Oil Spill Working Groups. The initiation meeting had goals that included identifying specific tasks to be completed by the two Working Groups, discussion of contents and scope of materials being prepared for an oil spill workshop, and determining project schedules. The Community-Based Concerns group focused its work on identifying ecological concerns related to oil spills and their cleanup, identifying community-based ecological issues and concerns, and incorporating local and traditional knowledge into the BREAM program. The group suggested changes to the wording of existing impact hypotheses and oil spill scenarios, and recommended changes in a list of valued ecosystem components. The oil spill group reviewed ecological concerns related to oil spills, and reviewed each oil spill scenario and impact hypothesis selected for an interdisciplinary workshop held in February 1993. The workshop evaluated four of the most important oil spill impact hypotheses (offshore platform blowout, river barge spill of diesel fuel, under-ice spill from a pipeline river crossing, and a pipeline spill affecting mammals). Further research and monitoring related to a number of impact hypotheses was recommended by workshop participants. 57 refs., 29 figs., 12 tabs

Carbon-covered Fe_3O_4 hollow cubic hierarchical porous composite as the anode material for lithium-ion batteries

International Nuclear Information System (INIS)

Chen, Shouhui; Zhou, Rihui; Chen, Yaqin; Fu, Yuanyuan; Li, Ping; Song, Yonghai; Wang, Li

2017-01-01

In this work, Prussian blue nanocrystals, a kind of cubic metal-organic frameworks, was firstly covered by a uniform layer of resorcinol-formaldehyde (RF) resin, and then followed with heat treatment at different pyrolysis temperatures. The effects of pyrolysis temperature on the morphologies, phase, pore size, and electrochemical performance of the pyrolysis products were studied in this work. The composite generated at 600 "∘C, FexC600, was a hollow cubic composite of Fe_3O_4 covered by a thin RF-derived carbon layer. The carbon layer on FexC600 was a robust and conductive protective layer, which can accommodate Fe_3O_4 NPs and withstand the huge volume change of Fe_3O_4 during the process of discharge and charge. When used as anodes for lithium-ion batteries, FexC600 showed excellent electrochemical performance. It delivered a discharge capacity of 1126 mAh g"−"1 with a coulombic efficiency of 98.8% at the current density of 100 mA g"−"1 after 100 times discharge/charge cycling. It even delivered a capacity of 492 mAh g"−"1 at the current density of 500 mA g"−"1. This cubic hollow composite would be a promising alternative anode material for lithium-ion batteries.

Strategic Laser Communications Program. Volume 1. Proceedings of the Navy/DARPA Fourth Technical Interchange Meeting, 25-27 March 1980

Science.gov (United States)

1980-07-31

r wc z > IK z ul z w U- L.. 0cLL LLz ILlO W: LJ1- V. LLJ (D or40 0 LA% - a P.-1 . ~ W.- WO W LLJ ~ 2c I- -gV"C LL WL LL- 0i Wix I I Cý Lai caL ) - u...that shadowing effects on our irradiance measurements were negligible (except at high noon). The barge provided a platform where rapid, efficient and

Monitor of Energetic Saving. Final measurements; Monitor VoortVarend Besparen. Eindmeting

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-05-15

In 2007, the Dutch Ministry of Waterways and Public Works (currently the Ministry of Infrastructure and Environment) launched the multi-annual plan 'Voortvarend Besparen 2007-2010' (Energetic Saving) that aims to stimulate captains of barges into more energy efficient sailing behavior. The program aims to encourage energy efficient operation of ships, resulting in a fuel saving and a 5% reduction in CO2 emissions in inland shipping in 2010 compared to 2007. In the final measurement, questionnaires were sent to the barge skippers to find out if the inland shipping sector succeeded in realizing the target and to examine to what extent the Energetic Saving program contributed to the CO2 reduction. [Dutch] In 2007 heeft het Ministerie van Verkeer en Waterstaat (nu het Ministerie van Infrastructuur en Milieu) het startsein gegeven voor het meerjarenprogramma VoortVarend Besparen (2007 - 2010) met als doel schippers te stimuleren tot energie-efficienter vaargedrag. Het programma dient energie-efficienter vaargedrag te stimuleren resulterend in een brandstofbesparing en een 5% reductie van CO2 emissies in de binnenvaartsector in 2010 ten opzichte van 2007. In de eindmeting is door middel van enquetes onder binnenvaartschippers onderzocht of de binnenvaartsector deze doelstelling heeft gehaald, en in welke mate het VoortVarend Besparen programma heeft bijgedragen aan deze CO2-reductie.

Source water quality shaping different fouling scenarios in a full-scale desalination plant at the Red Sea

KAUST Repository

Khan, Muhammad; Manes, Carmem Lara De O; Aubry, Cyril; Croue, Jean-Philippe

2013-01-01

produced at a seawater RO desalination plant installed on a floating mobile barge. The plant was moved along the coastline of the Red Sea in Saudi Arabia. The two locations where the barge was anchored showed different water quality. At the second location

Methods for estimating costs of transporting spent fuel and defense high-level radioactive waste for the civilian radioactive waste management program

International Nuclear Information System (INIS)

Darrough, M.E.; Lilly, M.J.

1989-01-01

The US Department of Energy (DOE), through the Office of Civilian Radioactive Waste Management, is planning and developing a transportation program for the shipment of spent fuel and defense high-level waste from current storage locations to the site of the mined geologic repository. In addition to its responsibility for providing a safe transportation system, the DOE will assure that the transportation program will function with the other system components to create an integrated waste management system. In meeting these objectives, the DOE will use private industry to the maximum extent practicable and in a manner that is cost effective. This paper discusses various methodologies used for estimating costs for the national radioactive waste transportation system. Estimating these transportation costs is a complex effort, as the high-level radioactive waste transportation system, itself, will be complex. Spent fuel and high-level waste will be transported from more than 100 nuclear power plants and defense sites across the continental US, using multiple transport modes (truck, rail, and barge/rail) and varying sizes and types of casks. Advance notification to corridor states will be given and scheduling will need to be coordinated with utilities, carriers, state and local officials, and the DOE waste acceptance facilities. Additionally, the waste forms will vary in terms of reactor type, size, weight, age, radioactivity, and temperature

49 CFR 176.96 - Materials of construction.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Materials of construction. 176.96 Section 176.96 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... Requirements for Barges § 176.96 Materials of construction. Barges used to transport hazardous materials must...

46 CFR 56.01-1 - Scope (replaces 100.1).

Science.gov (United States)

2010-10-01

... ships' and barges' piping systems and appurtenances. (b) The respective piping systems installed on ships and barges shall have the necessary pumps, valves, regulation valves, safety valves, relief valves... operation of the vessel. (c) Piping for industrial systems on mobile offshore drilling units need not fully...

Carbon-covered Fe{sub 3}O{sub 4} hollow cubic hierarchical porous composite as the anode material for lithium-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Chen, Shouhui, E-mail: csh2k@jxnu.edu.cn; Zhou, Rihui; Chen, Yaqin; Fu, Yuanyuan; Li, Ping; Song, Yonghai; Wang, Li, E-mail: lwanggroup@aliyun.com [Jiangxi Normal University, College of Chemistry and Chemical Engineering (China)

2017-04-15

In this work, Prussian blue nanocrystals, a kind of cubic metal-organic frameworks, was firstly covered by a uniform layer of resorcinol-formaldehyde (RF) resin, and then followed with heat treatment at different pyrolysis temperatures. The effects of pyrolysis temperature on the morphologies, phase, pore size, and electrochemical performance of the pyrolysis products were studied in this work. The composite generated at 600 {sup ∘}C, FexC600, was a hollow cubic composite of Fe{sub 3}O{sub 4} covered by a thin RF-derived carbon layer. The carbon layer on FexC600 was a robust and conductive protective layer, which can accommodate Fe{sub 3}O{sub 4} NPs and withstand the huge volume change of Fe{sub 3}O{sub 4} during the process of discharge and charge. When used as anodes for lithium-ion batteries, FexC600 showed excellent electrochemical performance. It delivered a discharge capacity of 1126 mAh g{sup −1} with a coulombic efficiency of 98.8% at the current density of 100 mA g{sup −1} after 100 times discharge/charge cycling. It even delivered a capacity of 492 mAh g{sup −1} at the current density of 500 mA g{sup −1}. This cubic hollow composite would be a promising alternative anode material for lithium-ion batteries.

LASH Ship Pretest Results of the Joint Logistics-Over-the-Shore (LOTS) Test and Evaluation Program.

Science.gov (United States)

1977-03-07

75-05. 9 0 wU C-7) z C) S.- C)C 40 10 GA’THEFRING CO~l BARGE LIFTING POINT I , I I II I I . . .. .. KI- V~~ PS4 and 5. LCM8 LIFT BEAM IS ENGAGED...design but which could not be delivered in time by the vendor. The attachment of the struts proved to be a time- consuming effort because of too close...actually used in the pretest, the general behavior and characteristics are similar.) C-4 APPENDIX D BREAKBULK CARGO THROUGHPUT OPERATIONS As an adjunct to

Synthesis and evaluation of [18F]exendin (9–39) as a potential biomarker to measure pancreatic β-cell mass

International Nuclear Information System (INIS)

Wang Yi; Lim, Keunpoong; Normandin, Marc; Zhao Xiaojian; Cline, Gary W.; Ding Yushin

2012-01-01

Introduction: Glucagon-like peptide 1 (GLP-1) is released in response to food intake and plays an important role in maintaining blood glucose homeostasis. Exendin (9–39), a potent glucagon-like peptide 1 receptor antagonist, has been labeled with In-111 for SPECT imaging. We report here the first radiosynthesis of [ 18 F]exendin (9–39) ([ 18 F]Ex(9–39)) and an evaluation of its potential as a biomarker for in vivo positron emission tomography (PET) imaging of pancreatic β-cell mass (BCM) in rats. Methods: F-18 label was introduced by conjugation of [ 18 F]4-fluorobenzaldehyde with an Ex(9–39) derivative containing a 6-hydrazinonicotinyl group on the ε-amine of Lys27. Positron emission tomography imaging was carried out in Sprague–Dawley rats (five control and five streptozotocin-induced diabetic) and BioBreeding diabetes-prone rats (three at 7 weeks and three at 12 weeks) using the high-resolution research tomograph (HRRT) after 0.187±0.084 mCi [ 18 F]Ex(9–39) administration. Time–activity curves were obtained from pancreas, liver and kidney. Pancreases were assayed for insulin content after the imaging study. Results: Site-specifically labeled [ 18 F]Ex(9–39) was purified on a G15 open column with radiochemical and chemical purities >98%. Positron emission tomography imaging showed pancreatic standardized uptake value (SUV) peaked at 10 min and plateaued by 50 min to the end of scan (240 min). No correlations of pancreatic SUV with postmortem measures of insulin content were seen. Conclusions: [ 18 F]Ex(9–39) was successfully prepared and used for PET imaging for the first time to measure pancreatic BCM. The results suggest that derivatization of the Lys27 residue might reduce binding affinity, as evidenced by the absence of specific binding. Exendin analogues radiolabeled at other sites may elucidate the active site required for binding.

Warfighter Physiological Status Monitoring (WPSM): Energy Balance and Thermal Status During a 10-Day Cold Weather U.S. Marine Corps Infantry Officer Course Field Exercise

National Research Council Canada - National Science Library

Hoyt, Reed

2001-01-01

...) during a 10-day field exercise (FEX) at Quantico, VA. Question: Does intense physical activity, limited sleep, and restricted rations, combined with cold/damp weather, result in excessively negative energy balance and hypothermia? Methods...

HEURISTIC METHOD OF SHIPS SELECTION FOR THE COORDINATED WORK OF WATER TRANSPORT

Directory of Open Access Journals (Sweden)

O. V. Shcherbina

2018-02-01

Full Text Available Purpose. The study aims to develop a formulation methodology for ship selection in the coordinated work of sea and river transport using a heuristic approach. Methodology. To realize the purpose set in the study, the authors carried out an analysis of domestic and foreign literature sources on the current topic, studied specifics and conditions for the effective operation of marine mono-hulled ships and composite tug/barge towing ones. Findings. The analysis results allowed formulating the heuristics methods that ensure the selection of the type sizes of tug/barge towing ships for the mixed «river-sea» navigation from the priority range of ships of the existing fleet. The proposed method makes it possible to select ships in a more appropriate manner according to the established scheme of work. Rational combinations of technical and operational characteristics of such pairs as «barges and tows», «tug/barge towing ship and sea-going ship», «tug/barge towing ship and restrictive characteristics of the area of navigation» are a prerequisite for the shipping company profit growth by increasing the capacity of ships. Originality. For the first time, the authors applied a heuristic approach to the selection of tug/barge towing ships and sea-going ones for coordinated work with the performance of cargo operations on the raid of the estuary port when transporting bulk goods. The basis of the approach is the selection of a rational mix of technical and operational characteristics of barges and tugs. The proposed approach allows determining the best combination of ship type sizes in the organization of coordinated work of sea and river transport. At the same time, the continuity of the goods transportation process from the sea ports to the river ones located in the depth of the country (and in the opposite direction is ensured. Practical value. The presented methodology is a logical continuation of the cycle of studies performed by the authors. The

46 CFR 151.10-20 - Hull construction.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Hull construction. 151.10-20 Section 151.10-20 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Barge Hull Construction Requirements § 151.10-20 Hull construction. (a) Construction features. (1) Each barge hull shall be constructed with a suitable bow form...

76 FR 75450 - Safety Zone; Container Crane Relocation, Cooper and Wando Rivers, Charleston, SC

Science.gov (United States)

2011-12-02

...-AA00 Safety Zone; Container Crane Relocation, Cooper and Wando Rivers, Charleston, SC AGENCY: Coast... moving safety zone around a barge transporting two container cranes on the Cooper and Wando Rivers during... barge will transit the Cooper and Wando Rivers. Because of the size of the two container cranes and the...

Abandoned Vessels and Barges, Geographic NAD83, LOSCO (1996) [barge_LOSCO_1996

Data.gov (United States)

Louisiana Geographic Information Center — This is a point dataset with two accompanying 'sample tables' [vabfldsmpap96] and [vablabsmpap96] that summarize the results of the study to inventory abandoned...

46 CFR 151.45-7 - Shipping papers.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Shipping papers. 151.45-7 Section 151.45-7 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-7 Shipping papers. Each barge carrying... towing vessel shall either have a copy of the shipping papers for each barge in his tow or he shall make...

40 CFR 63.8985 - Am I subject to this subpart?

Science.gov (United States)

2010-07-01

... unit into a tank truck, rail car, ship, or barge, along with the piping and other equipment in HCl... produced in the HCl production unit is loaded into a tank truck, rail car, ship, or barge, at the point the... sources within a contiguous area under common control that emits or has the potential to emit any single...

Eco-friendly (green) synthesis of magnetically active gold nanoclusters

Science.gov (United States)

Kadasala, Naveen Reddy; Lin, Lu; Gilpin, Christopher; Wei, Alexander

2017-12-01

Au-FexOy composite nanoparticles (NPs) are of great technological interest due to their combined optical and magnetic properties. However, typical syntheses are neither simple nor ecologically friendly, creating a challenging situation for process scale-up. Here we describe conditions for preparing Au-FexOy NPs in aqueous solutions and at ambient temperatures, without resorting to solvents or amphiphilic surfactants with poor sustainability profiles. These magnetic gold nanoclusters (MGNCs) are prepared in practical yields with average sizes slightly below 100 nm, and surface plasmon resonances that extend to near-infrared wavelengths, and sufficient magnetic moment (up to 6 emu g-1) to permit collection within minutes by handheld magnets. The MGNCs also produce significant photoluminescence when excited at 488 nm. Energy dispersive X-ray (EDX) analysis indicates a relatively even distribution of Fe within the MGNCs, as opposed to a central magnetic core.

Structure, ac conductivity and complex impedance study of Co3O4 ...

African Journals Online (AJOL)

user

results of the crystal structure formation and dielectric properties of the .... To improve the single phased crystalline structure, we annealed the as milled samples at 9500C for 12 ..... Mössbauer and optical investigation of Co3-xFexO4 thin.

IS21-558 insertion sequences are involved in the mobility of the multiresistance gene cfr

DEFF Research Database (Denmark)

Kehrenberg, Corinna; Aarestrup, Frank Møller; Schwarz, Stefan

2007-01-01

During a study of florfenicol-resistant porcine staphylococci from Denmark, the genes cfr and fexA were detected in the chromosomal DNA or on plasmids of Staphylococcus hyicus, Staphylococcus warneri, and Staphylococcus simulans. A novel variant of the phenicol resistance transposon Tn558...

Extreme Field Sensitivity of Magnetic Tunneling in Fe-Doped Li3 N

Science.gov (United States)

Fix, M.; Atkinson, J. H.; Canfield, P. C.; del Barco, E.; Jesche, A.

2018-04-01

The magnetic properties of dilute Li2 (Li1 -xFex )N with x ˜0.001 are dominated by the spin of single, isolated Fe atoms. Below T =10 K the spin-relaxation times become temperature independent indicating a crossover from thermal excitations to the quantum tunneling regime. We report on a strong increase of the spin-flip probability in transverse magnetic fields that proves the resonant character of this tunneling process. Longitudinal fields, on the other hand, lift the ground-state degeneracy and destroy the tunneling condition. An increase of the relaxation time by 4 orders of magnitude in applied fields of only a few milliTesla reveals exceptionally sharp tunneling resonances. Li2 (Li1 -xFex )N represents a comparatively simple and clean model system that opens the possibility to study quantum tunneling of the magnetization at liquid helium temperatures.

Proceedings: Workshop on Reducing Tankbarge Pollution, April 15-16, 1980.

Science.gov (United States)

1980-08-01

MacRae III. GROUP II - TECHNICAL OPTIONS AND PROBLEMS 115 Cargo/Barge-Type Interaction - 117 William Creelman National Marine Service, Inc. xi Some...CONSIDERATIONS W. A. Creelman President, Transport Division National Marine Service, Inc. National Marine Service Incorporated has extensive experience in...There is already a signifi- cant industrial trend towards double hulled barges. According to the statistics presented by W. A. Creelman , there are

The operational efficiency of waterway transport of forest chips on Finland's Lake Saimaa

Energy Technology Data Exchange (ETDEWEB)

Karttunen, K.; Ranta, T. [Lappeenranta Univ. of Technology, LUT Savo Sustainable Technologies, Mikkeli (Finland); Vaatainen, K.; Asikainen, A. [The Finnish Forest Research Inst., Joensuu (Finland)], E-mail: kalle.karttunen@lut.fi

2012-11-01

New and cost-efficient methods for use in supply chains for energy wood should be found, to reach the targets of the renewable energy utilisation set by the European Union. The long-distance waterway transportation of forest fuels should be thoroughly investigated, especially in areas where the transport distance is long and waterways could provide a feasible method of conveying forest fuel. In comparison to transport of forest chips by truck, barge-based waterway transport shows a competitive advantage due to the larger loads and higher bulk density of chips it allows. The cost-efficiency of waterway transportation operations related to forest chips in Finland's Lake Saimaa region was studied using practical demonstrations and discrete-event simulation. The varying demand for fuel wood in three separate bio-power plants on the Saimaa lakeside (near the cities of Varkaus, Mikkeli, and Savonlinna) was addressed in several barge transportation scenarios. Finally, the economy of barge transportation was compared to the economy of truck transportation as a function of transportation distance and in terms of the annual performance of the transportation methods examined. The waterway supply chain of forest chips was cost-competitive to road transport by truck after 100-150 km. According to the simulation study, the most economical waterway transport options were based on fixed barge system and shift-independent harbor logistics where loading and unloading of barges were carried-out with a wheeled loader and a belt conveyor. Total supply chain costs including the best waterway logistics from road side storage to power plant ranged from 10.75 euros to 11.64 euros/MWh in distances of 100-150 km by waterways. The energy-density of forest chips in the barge load was found to be, on average, 25% higher than that in truck hauling, because of the better compaction of chips. Waterway transport is a viable option for long-distance transportation of forest chips in Eastern

Valence-electron configuration of Fe, Cr, and Ni in binary and ternary alloys from Kβ -to- Kα x-ray intensity ratios

Science.gov (United States)

Han, I.; Demir, L.

2009-11-01

Kβ -to- Kα x-ray intensity ratios of Fe, Cr, and Ni have been measured in pure metals and in alloys of FexNi1-x ( x=0.8 , 0.7, 0.6, 0.5, 0.4, 0.3, and 0.2), NixCr1-x ( x=0.8 , 0.6, 0.5, 0.4, and 0.2), FexCr1-x ( x=0.9 , 0.7, and 0.5), and FexCryNi1-(x+y) ( x=0.7-y=0.1 , x=0.5-y=0.2 , x=0.4-y=0.3 , x=0.3-y=0.3 , x=0.2-y=0.2 , and x=0.1-y=0.2 ) following excitation by 22.69 keV x rays from a 10 mCi C109d radioactive point source. The valence-electron configurations of these metals were determined by corporation of measured Kβ -to- Kα x-ray intensity ratios with the results of multiconfiguration Dirac-Fock calculation for various valence-electron configurations. Valence-electron configurations of 3d transition metals in alloys indicate significant differences with respect to the pure metals. Our analysis indicates that these differences arise from delocalization and/or charge transfer phenomena in alloys. Namely, the observed change of the valence-electron configurations of metals in alloys can be explained with the transfer of 3d electrons from one element to the other element and/or the rearrangement of electrons between 3d and 4s,4p states of individual metal atoms.

Coupled Cluster Theory for Large Molecules

DEFF Research Database (Denmark)

Baudin, Pablo

This thesis describes the development of local approximations to coupled cluster (CC) theory for large molecules. Two different methods are presented, the divide–expand–consolidate scheme (DEC), for the calculation of ground state energies, and a local framework denoted LoFEx, for the calculation...

Direction des Publications

African Journals Online (AJOL)

Synthese

Comportement à la corrosion de couches minces nano structurées. FexSiy, élaborées par ... Fe1-xSix thin films were obtained by DC magnetron sputtering on glass substrates. The alloys were prepared from pure Fe and Si targets. The alloys ...

Bifluoride-catalysed sulfur(VI) fluoride exchange reaction for the synthesis of polysulfates and polysulfonates

Science.gov (United States)

Gao, Bing; Zhang, Linda; Zheng, Qinheng; Zhou, Feng; Klivansky, Liana M.; Lu, Jianmei; Liu, Yi; Dong, Jiajia; Wu, Peng; Sharpless, K. Barry

2017-11-01

Polysulfates and polysulfonates possess exceptional mechanical properties making them potentially valuable engineering polymers. However, they have been little explored due to a lack of reliable synthetic access. Here we report bifluoride salts (Q+[FHF]-, where Q+ represents a wide range of cations) as powerful catalysts for the sulfur(VI) fluoride exchange (SuFEx) reaction between aryl silyl ethers and aryl fluorosulfates (or alkyl sulfonyl fluorides). The bifluoride salts are significantly more active in catalysing the SuFEx reaction compared to organosuperbases, therefore enabling much lower catalyst-loading (down to 0.05 mol%). Using this chemistry, we are able to prepare polysulfates and polysulfonates with high molecular weight, narrow polydispersity and excellent functional group tolerance. The process is practical with regard to the reduced cost of catalyst, polymer purification and by-product recycling. We have also observed that the process is not sensitive to scale-up, which is essential for its future translation from laboratory research to industrial applications.

Design and testing of the high speed signal densely populated ATLAS calorimeter trigger board dedicate to jet identification

CERN Document Server

Vieira De Souza, Julio; The ATLAS collaboration

2017-01-01

Abstract—The ATLAS experiment has planned a major upgrade in view of the enhanced luminosity of the beam delivered by the Large Hadron Collider (LHC) in 2021. As part of this, the trigger at Level-1 based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature Extractors (three in total), which each uses different physics objects for the trigger selection. The contribution focusses on the jet Feature EXtractor (jFEX) prototype. Up to a data volume of 2 TB/s has to be processed to provide jet identification (including large area jets) and measurements of global variables within few hundred nanoseconds latency budget. Such requirements translate into the use of large Field Programmable Gate Array (FPGA) with the largest number of Multi Gigabit Transceivers (MGTs) available on the market. The jFEX board prototype hosts four large FPGAs from the Xilinx Ultrascale family with 120 MGTs each, connected to 24 opto-electrical devices, resulting in a densely populated hi...

Thermodynamic modeling of the Sr-Co-Fe-O system

DEFF Research Database (Denmark)

Zhang, Wei Wei; Povoden-Karadeniz, Erwin; Chen, Ming

2016-01-01

This paper reviews and assesses phase equilibria and thermodynamic properties of phases in the Sr-Co-Fe-O system, with a focus on oxides, especially the SrCo1 - xFexO3 - δ perovskite. In our work, the SrCo1 - xFexO3 - δ perovskite was modeled with a three-sublattice model, where the three...... sublattices correspond to the A, B and oxygen sites in an ABO3 perovskite, respectively. A number of other important ternary oxide phases in Sr-Co-O and Sr-Co-Fe-O were also considered. Available thermodynamic and phase diagram data were carefully assessed. A thermodynamic description of Sr-Co-O was derived...... using the CALPHAD approach and was further extrapolated to that of Sr-Co-Fe-O. The thermodynamic database of Sr-Co-Fe-O established in this work allows for calculating phase diagrams, thermodynamic properties, cation distribution and defect chemistry properties, and therefore enables material...

Observations and analysis of oil spills using polarized imagery

International Nuclear Information System (INIS)

Israel, S.A.; Duncan, M.E.; Johnson, W.R.; Whitehead, V.S.

1991-01-01

On Saturday, July 28, 1990, a train of barges collided with the Greek tanker Shinoussa in Galveston Bay off Red Fish Island near Texas City, Texas. The first barge sank and the second began to leak while the third barge in the chain and the Shinoussa both escaped without damage. The NASA Flight Science Support Office sponsored a Graduate Student from SUNY - College of Environmental Science and Forestry and a student from Texas A ampersand M, Galveston, to survey the damage. The purpose of this paper is to correlate aircraft base data with orbital data obtained during the Space Shuttle Polarization Experiment and existing laboratory data to evaluate the potential for an application such as oil spill monitoring and mapping. NASA has no charter with the local response agencies to support oil spill monitoring and cleanup

Investigation of Mechanical Breakdowns Leading to Lock Closures

Science.gov (United States)

2017-06-01

anchorage, anchor bolts, anchor bars, pins, etc. 2 Gate cracks or structural failure 2 Barge accidents 1 Electrical and power control issues 0... structural failure 7 ERDC/CERL TR-17-17 9 Cause Occurrences Barge accidents 5 Electrical and power control issues 1 Gate noise 4 Gate vibrations 4...Engineers Washington, DC 20314-1000 Under Project “ Structural Monitoring System for Lock Structures to Prevent Failure” ERDC/CERL TR-17-17 ii Abstract

Coast Guard Proceedings. Volume 71, Number 1, Spring 2014

Science.gov (United States)

2014-01-01

Canada. Rescue aircrew from Coast Guard Air Station Traverse City, Mich., conduct helicopter hoist training with the crew of the Canadian Coast...barge about 70-feet forward of the towing vessel — causing the barge to split nearly in half and dump thousands of gallons of oil into the...on the impeller B. double the liquid velocity through the pump when compared to a single volute C. reduce the hydraulic end thrust D. provide the

Lattice parameters of the Hg1-xFexSe and Cd1-xFexTe semimagnetic semiconductors

International Nuclear Information System (INIS)

Sarem, A.; Soulayman, S.

2004-01-01

Full text.Hg 1-x Fe x Se and Cd 1-x Fe x Te are members of a family of semiconducting alloys referred to as diluted magnetic semiconductors (DMS), i.e., ternary alloys whose lattice is made up in part of substitutional magnetic ions (in the present case, fe 2+ ). These materials are of considerable interest because, apart from the opportunities provided by the ternary nature of these compounds (e.g., tunability of the energy gap or the lattice constant), they display interesting magnetic properties as well as exchange interaction between the localized Fe 2+ moments and band electrons, resulting in a host of novel effects. In this paper we investigate the behavior of the crystal lattice of Hg 1-x Fe x Se and Cd 1-x Fe x Te, grown using modified Bridgman method. The purpose of the study is providing precise quantitative data for the lattice parameter as a function of x, which can then be used as a means of determining composition. The results of lattice parameter measurements on the ternary semiconductor alloys Hg 1-x Fe x Se over the range (0≤x≤0.15) and Cd 1-x Fe x Te in the range (0≤x≤0.03) are reports. Each sample was subjected to chemical analysis for determining the real concentration of iron. Here it was found that the differences between the nominal compositions and the real ones for all investigated samples are negligible. The powdered samples of Hg 1-x Fe x Se and Cd 1-x Fe x Te with different nominal compositions were studied using a DRON diffractometer with filtered Cο radiation (λ kα1 =1.78892A; λ kα2 =1.79278A). The diffraction patterns with a scan rate of 1 degree 2θ/min were taken. Precise measurements of the line position diffracted and extrapolation method to determine a to value θ=90 degree were made by Least Square Method. This method allowed determining cell parameters foe each sample with accuracy ±0.0001A. The crystal structure of these compounds was determined as a cubic one of the zinc blede type. The structural homogeneity of the samples was ascertained. We find, in the case of Hg 1-x Fe x Se, that the lattice constants decreases linearly with iron concentration x, this result corresponds, with a small deviation, to Vegard's law, while a big deviation from Vegard's law is observed in the case of Cd 1-x Fe x Te. The limit of solubility of iron in HgSe and CdTe was not observed in the range of the investigated compositions. Moreover, it was found that the Fe atoms are distributed randomly and any order or preferable position of the magnetic atoms was not observed in these crystals

Seismic response analysis of floating nuclear power plant

International Nuclear Information System (INIS)

Hagiwara, Yutaka; Nakamura, Hideharu; Shiojiri, Hiroo

1988-01-01

Since Floating Nuclear Power Plants (FNPs) are considered to be isolated from horizontal seismic motion, it is anticipated to reduce seismic load for plant components and buildings on the barge. On the other hand, barge oscillation and sloshing in the closed basin might be excited by earthquakes, because natural periods of those motions correspond to relatively-long period component (between 2 and 20 seconds) of seismic motion. Therefore, it is necessary to evaluate seismic isolation effects and barge oscillation, for the rational design of FNPs. However, there do not exist any reasonable analytical tools which can evaluate seismic response of floating structures in closed basin. The purpose of the present report is to develop a seismic analysis method for FNPs. The proposed method is based on the finite element method, and the formulation includes fluid-structure interaction, water surface wave, buoyancy effect, and non-linear characteristics of mooring system. Response analysis can be executed in both time-domain and frequency-domain. Shaking table tests were conducted to validate the proposed method of analysis. The test results showed significant isolation effect of floating structure, and apparent interaction between the barge and the basin. And 2-D and 3-D frequency domain analyses and the 2-D linear and non-linear time-domain analyses were done and those analyses could simulate the test results well. (author)

77 FR 20727 - Seagoing Barges

Science.gov (United States)

2012-04-06

... response to the direct final rule. In the first comment, the commenter stated that without a definition of... that without a definition of the term ``manned,'' the rule would be ineffective. In the direct final... are adverse comments. In the first comment, the commenter expressed concern that, without a definition...

Waterway Equipment - Boat, Barge, Motor

Science.gov (United States)

2012-09-25

Equation 3 LCG = (Dfwd * Wfwd) + ( Daft * Waft) / W Equation 4 where: Wfwd = sum of weights from forward scales Waft = sum of weights from...aft scales W = Wfwd + Waft = weight of craft as inclined Dfwd = longitudinal distance of forward scales from the reference point Daft

77 FR 18929 - Seagoing Barges

Science.gov (United States)

2012-03-29

... instruction in oceanography or limnology, or both, or exclusively in oceanographic research, * * *. Under 46 U... or limnology, or both, or exclusively in oceanographic research, * * * *. Under 46 U.S.C. 443, ``an... ``* * * being employed exclusively in instruction in oceanography or limnology, or both, or exclusively in...

78 FR 2147 - Seagoing Barges

Science.gov (United States)

2013-01-09

... voluntarily continue to undergo inspection and to maintain certification. This may reflect a rational business... Coast Guard message dated April 18, 1996, establishing that policy.) The 250-barrel threshold is also... the same impact; in both cases sections 90.05-25 and 91.01-10 would be aligned with 46 U.S.C. 2101(32...

76 FR 77712 - Seagoing Barges

Science.gov (United States)

2011-12-14

... procedural and merely align the text of the regulations with current law and Coast Guard practice. An... submitted to our online docket via http://www.regulations.gov on or before February 13, 2012 or reaches the... Vessel Inspection Circular Pub. L. Public Law U.S.C. United States Code III. Regulatory Information We...

78 FR 56612 - Seagoing Barges

Science.gov (United States)

2013-09-13

... the crew. (C) Fishing vessels not engaged in ocean or coastwise service. Such vessels may carry... ocean or coastwise service may carry persons on the legitimate business of the vessel \\6\\ in addition to... columns 3 and 6. that would (B) Carry more than operating or otherwise be 12 passengers when navigating...

Oxidation of Cr(III)-Fe(III) Mixed-phase Hydroxides by Chlorine: Implications on the Control of Hexavalent Chromium in Drinking Water.

Science.gov (United States)

Chebeir, Michelle; Liu, Haizhou

2018-05-17

The occurrence of chromium (Cr) as an inorganic contaminant in drinking water is widely reported. One source of Cr is its accumulation in iron-containing corrosion scales of drinking water distribution systems as Cr(III)-Fe(III) hydroxide, i.e., FexCr(1-x)(OH)3(s), where x represents the Fe(III) molar content and typically varies between 0.25 and 0.75. This study investigated the kinetics of inadvertent hexavalent chromium Cr(VI) formation via the oxidation of FexCr(1-x)(OH)3(s) by chlorine as a residual disinfectant in drinking water, and examined the impacts of Fe(III) content and drinking water chemical parameters including pH, bromide and bicarbonate on the rate of Cr(VI) formation. Data showed that an increase in Fe(III) molar content resulted in a significant decrease in the stoichiometric Cr(VI) yield and the rate of Cr(VI) formation, mainly due to chlorine decay induced by Fe(III) surface sites. An increase in bicarbonate enhanced the rate of Cr(VI) formation, likely due to the formation of Fe(III)-carbonato surface complexes that slowed down the scavenging reaction with chlorine. The presence of bromide significantly accelerated the oxidation of FexCr(1-x)(OH)3(s) by chlorine, resulting from the catalytic effect of bromide acting as an electron shuttle. A higher solution pH between 6 and 8.5 slowed down the oxidation of Cr(III) by chlorine. These findings suggested that the oxidative conversion of chromium-containing iron corrosion products in drinking water distribution systems can lead to the occurrence of Cr(VI) at the tap, and the abundance of iron, and a careful control of pH, bicarbonate and bromide levels can assist the control of Cr(VI) formation.

Structural characterization of a new vacancy ordered perovskite modification found for Ba3Fe3O7F (BaFeO2.333F0.333): Towards understanding of vacancy ordering for different perovskite-type ferrites

International Nuclear Information System (INIS)

Clemens, Oliver

2015-01-01

The new vacancy ordered perovskite-type compound Ba 3 Fe 3 O 7 F (BaFeO 2.33 F 0.33 ) was prepared by topochemical low-temperature fluorination of Ba 2 Fe 2 O 5 (BaFeO 2.5 ) using stoichiometric amounts of polyvinylidene difluoride (PVDF). The vacancy order was found to be unique so far for perovskite compounds, and the connectivity pattern can be explained by the formula Ba 3 (FeX 6/2 ) (FeX 5/2 ) (FeX 3/2 X 1/1 ), with X=O/F. Mössbauer measurements were used to confirm the structural analysis and agree with the presence of Fe 3+ in the above mentioned coordination environments. Group–subgroup relationships were used to build a starting model for the structure solution and to understand the relationship to the cubic perovskite structure. Furthermore, a comparison of a variety of vacancy-ordered iron-containing perovskite-type structures is given, highlighting the factors which favour one structure type over the other depending on the composition. - Graphical abstract: The crystal structure of Ba 3 Fe 3 O 7 F in comparison to other perovskite type ferrites. - Highlights: • The crystal structure of Ba 3 Fe 3 O 7 F in comparison to other perovskite type ferrites. • Ba 3 Fe 3 O 7 F was synthesized by low temperature fluorination of Ba 2 Fe 2 O 5 . • Ba 3 Fe 3 O 7 F shows a unique vacancy order not found for other perovskite type compounds. • The structure of Ba 3 Fe 3 O 7 F was solved using group–subgroup relationships. • A systematic comparison to other ferrite type compounds reveals structural similarities and differences. • The A-site coordination of the cation is shown to play an important role for the type of vacancy order found

The Use of Simulators in Rules of the Road Training

Science.gov (United States)

2013-12-01

RoAoLMSR s llil>oal yacht s llil>oal yacht Tanker132k Tanker132k T anker!IO< Tug Barge Pushing Sand Tug Barge Pushing Sand on Starbo ... I 40...Boat Pilot Vessel Powe1Boat Cabin Cruiser Sailboat Yacht Sailboat Yacht Smoke Float Smoke Float Smoke Float Smoke Float Tanker 132k Tanker...2 Sailboat Yacht Smoke Float 2 Smoke Float 3 Smoke Float 4 Tanker 132k 2 Tanker 40k Tanker BOk T onker lnlond 2 Trawling trawling 2 Tug3

Design and testing of the high speed signal densely populated ATLAS calorimeter trigger board dedicate to jet identification

CERN Document Server

Vieira De Souza, Julio; The ATLAS collaboration

2018-01-01

The ATLAS experiment has planned a major upgrade in view of the enhanced luminosity of the beam delivered by the Large Hadron Collider (LHC) in 2021. As part of this, the trigger at Level-1 based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature Extractors (three in total), which each uses different physics objects for the trigger selection. The contribution focusses on the jet Feature EXtractor (jFEX) prototype. Up to a data volume of 2 TB/s has to be processed to provide jet identification (including large area jets) and measurements of global variables within few hundred nanoseconds latency budget. Such requirements translate into the use of large Field Programmable Gate Array (FPGA) with the largest number of Multi Gigabit Transceivers (MGTs) available on the market. The jFEX board prototype hosts four large FPGAs from the Xilinx Ultrascale family with 120 MGTs each, connected to 24 opto-electrical devices, resulting in a densely populated high speed si...

Fe concentration dependence of tunneling magnetoresistance in magnetic tunnel junctions using group-IV ferromagnetic semiconductor GeFe

Directory of Open Access Journals (Sweden)

Kosuke Takiguchi

2017-10-01

Full Text Available Group-IV-based ferromagnetic semiconductor Ge1−xFex (GeFe is one of the most promising materials for spin injection/detection in Si and Ge. In this paper, we demonstrate a systematic study of tunneling magnetoresistance (TMR in magnetic tunnel junctions (MTJs composed of Fe/MgO/Ge1−xFex with various Fe concentrations (x = 0.065, 0.105, 0.140, and 0.175. With increasing x, the TMR ratio increases up to 1.5% when x≤ 0.105, and it decreases when x> 0.105. This is the first observation of the TMR ratio over 1% in MTJs containing a group-IV ferromagnetic semiconductor. With increasing x, while the Curie temperature of GeFe increases, the MgO surface becomes rougher, which is thought to be the cause of the upper limit of the TMR ratio. The quality of the MgO layer on GeFe is an important factor for further improvement of TMR in Fe/MgO/GeFe MTJs.

Latest Frontier Technology and Design of the ATLAS Calorimeter Trigger Board Dedicated to Jet Identification

CERN Document Server

Rocco, Elena; The ATLAS collaboration

2016-01-01

To cope with the enhanced luminosity of the beam delivered by the Large Hadron Collider (LHC) in 2020, the A Thoroidal LHC ApparatuS (ATLAS) experiment has planned a major upgrade. As part of this, the trigger at Level-I based on calorimeter data, will be upgraded to exploit fine-granularity readout using a new system of Feature Extractors, which differ in the physics objects for the trigger selection. The presentation is focused on the jet Feature EXtractor (jFEX) prototype, one of the three Feature Extractors. In few hundreds nanoseconds latency budget, up to 2 TB/s have to be processed to provide jet identification (even large area jets) and measurements of global variables. This requires the use of large Field Programmable Gate Array (FPGA) with the largest Multi Giga Transceiver available on the market. The jFEX board prototype hosts four large FPGAs from the Xilinx Ultrascale family with 120 Multi Giga Transceivers each, connected to 24 opto-electrical devices, resulting in a densely populated high spee...

Latest Frontier Technology and Design of the ATLAS Calorimeter Trigger Board Dedicated to Jet Identification for the LHC Run 3

CERN Document Server

Rocco, Elena; The ATLAS collaboration; Brogna, Andrea Salvatore; B"uscher, Volker

2016-01-01

To cope with the enhanced luminosity of the beam delivered by the Large Hadron Collider (LHC) in 2020, the A Thoroidal LHC ApparatuS (ATLAS) experiment has planned a major upgrade. As part of this, the trigger at Level-I based on calorimeter data, will be upgraded to exploit fine-granularity readout using a new system of Feature Extractors, which differ in the physics objects for the trigger selection. The presentation is focused on the jet Feature EXtractor (jFEX) prototype, one of the three Feature Extractors. In few hundreds nanoseconds latency budget, up to 2 TB/s have to be processed to provide jet identification (even large area jets) and measurements of global variables. This requires the use of large Field Programmable Gate Array (FPGA) with the largest Multi Giga Transceiver available on the market. The jFEX board prototype hosts four large FPGAs from the Xilinx Ultrascale family with 120 Multi Giga Transceivers each, connected to 24 opto-electrical devices, resulting in a densely populated high spee...

Coordination polymer nanobamboos of {Fe(x)In(1-x)}-MIL-88B: induced formation of a virtual In-MIL-88B.

Science.gov (United States)

Park, Shin Ae; Lee, Hee Jung; Cho, Yea Jin; Choi, Sora; Oh, Moonhyun

2014-05-05

A precise fabrication of nanobamboo structures made from hybrid coordination polymers of the type {Fex In1-x }-MIL-88B is demonstrated. The compositions of the hybrid coordination polymer nanobamboos of {Fex In1-x }-MIL-88B (x=0.06, 0.19, or 0.75) are regulated by altering the amount of metal ions used in the reactions. Interestingly, the formation of a virtual In-MIL-88B (precise structure, {Fe0.06 In0.94 }-MIL-88B), which cannot be created in a typical reaction, is induced by the assistance of a Fe-MIL-88B structure. The a and c cell parameters of {Fe0.06 In0.94 }-MIL-88B are calculated at 10.95 and 19.86 Å, respectively. These values of {Fe0.06 In0.94 }-MIL-88B are larger than those of pure Fe-MIL-88B owing to the large ionic size of In(3+) within the framework. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Journal of Chemical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

New cerium-based ceramic pigments, displaying Ce2Pr0.2FexO4.3+y stoichiometry, were obtained at low temperature using a sol-gel method. The powder precursor dissolved in 80% ethylene glycol was precipitated using ammonia and the obtained gel calcined at 800°C for 2 h to yield homogeneous and crystalline ...

Laser resolution of unpolarized-electron scattering cross sections into spin-conserved and spin-flip components

International Nuclear Information System (INIS)

Ritchie, B.

1981-01-01

The theory is presented for one-photon free-free absorption by electrons scattering from high-Z atoms. The absorption cross section provides sufficient information to resolve the unpolarized-electron total cross section, Vertical Barf(theta)Vertical Bar 2 +Vertical Barg(theta)Vertical Bar 2 , into its individual components for spin-nonflip, Vertical Barf(theta)Vertical Bar 2 , and spin-flip, Vertical Barg(theta)Vertical Bar 2 , scattering. The observation of a spin-polarization effect for a spin-independent process (free-free absorption) is analogous to the Fano effect for bound-free absorption

Athabaca--special report No. 7, turntables, drums no transport problem

Energy Technology Data Exchange (ETDEWEB)

Pamenter, C B

1966-09-01

By rail, truck, auto, barge, and air, a steady stream of materials and men move speedily into what was once a remote northern area. This area is the Great Canadian Oil Sands Ltd.'s venture into petroleum production located 250 miles NE. of Edmonton. Transportation was a major problem during the initiation of this venture. For the first year and a half, all of the incoming heavy equipment was moved to the site by barge. This means has been considerably reduced by a new road and a multi-million dollar bridge. At present the bridge seems to be the only bottle neck to the transporting of over-size equipment; however, this can still be handled by barge. Many people take the 70-min. trip by air from Edmonton to Fort McMurray which is only 20 miles from the location. Few areas many times the size of the Great Canadian Oil Sands Ltd.'s plant location and Fort McMurray site have better connections to main centers of population than those enjoyed here.

Energy intensity, life-cycle greenhouse gas emissions, and economic assessment of liquid biofuel pipelines.

Science.gov (United States)

Strogen, Bret; Horvath, Arpad; Zilberman, David

2013-12-01

Petroleum fuels are predominantly transported domestically by pipelines, whereas biofuels are almost exclusively transported by rail, barge, and truck. As biofuel production increases, new pipelines may become economically attractive. Location-specific variables impacting pipeline viability include construction costs, availability and costs of alternative transportation modes, electricity prices and emissions (if priced), throughput, and subsurface temperature. When transporting alcohol or diesel-like fuels, pipelines have a lower direct energy intensity than rail, barge, and trucks if fluid velocity is under 1 m/s for 4-inch diameter pipelines and 2 m/s for 8-inch or larger pipelines. Across multiple hypothetical state-specific scenarios, profit-maximizing design velocities range from 1.2 to 1.9 m/s. In costs and GHG emissions, optimized pipelines outperform trucks in each state and rail and barge in most states, if projected throughput exceeds four billion liters/year. If emissions are priced, optimum design diameters typically increase to reduce pumping energy demands, increasing the cost-effectiveness of pipeline projects. Copyright © 2013 Elsevier Ltd. All rights reserved.

Successful well test application of portable multi-phase flow meter for high gas-volume and high water-cut wells in east Kalimantan, Indonesia

Energy Technology Data Exchange (ETDEWEB)

Kaura, Jiten D.; Finley, D.B. [PT Halliburton Indonesia, Jakarta (Indonesia); Sudradjat, Wangsa; Riyanto, Latief [Tota E and P Indonesie, Jakarta (Indonesia); Halverson, Martin [FlowSys AS, Bergen (Norway)

2004-07-01

Recently, testing was needed on production wells in East Kalimantan. The wells were in a mature field, and productivity from the wells field featured high water cut (WC) and extremely high gas-volume fractions (GVF). The WC and GVF ranged from 80 to 100% and 90 to 100%, respectively. Moreover, most of the wells are low productivity so they are very sensitive to back-pressure. The high WC, high GVF and low-productivity from these wells in this area present an extreme challenge for accurate production measurement. Barges are commonly used to perform well services in the swamp area of this marginal field, and production allocations from wells in this difficult area were previously monitored and measured with conventional well-test equipment on-board a well testing barge. The well test equipment traditionally used requires a large footprint, and the associated flaring presents an environmental situation in this sensitive swamp area. Hence, the MPFM solution was chosen. To better meet the challenges presented by the testing conditions, a portable multiphase flow meter (MPFM) was chosen to perform the testing from the well-testing barge. For comparative purposes, the MPFM was installed on the barge immediately upstream of the well testing equipment. Initial measurements with the MPFM yielded results that were {+-} 30% of the test separator reading. A slight modification was introduced to the MPFM system in the form of a gas knock-out (GKO) vessel. Subsequent measurements with the modified MPFM system yielded readings that were {+-}10% of the test separator reading. (author)

The water desalination complex based on ABV-type reactor plant

International Nuclear Information System (INIS)

Panov, Yu.K.; Fadeev, Yu.P.; Vorobiev, V.M.; Baranaev, Yu.D.

1997-01-01

A floating nuclear desalination complex with two barges, one for ABV type reactor plant, with twin reactor 2 x 6 MW(e), and one for reverse osmosis desalination plant, was described. The principal specifications of the ABV type reactor plant and desalination barge were given. The ABV type reactor has a traditional two-circuit layout using an integral type reactor vessel with all mode natural convection of primary coolant. The desalted water cost was estimated to be around US $0.86 per cubic meter. R and D work has been performed and preparations for commercial production are under way. (author)

Predicting transportation routes for radioactive wastes

International Nuclear Information System (INIS)

Joy, D.S.; Johnson, P.E.; Clarke, D.B.; McGuire, S.C.

1981-01-01

Oak Ridge National Laboratory (ORNL) has been involved in transportation logistics of radioactive wastes as part of the overall waste transportation program. A Spent Fuel Logistics Model (SFLM), was developed to predict overall material balances representing the flow of spent fuel assemblies from reactors to away-from-reactor storage facilities and/or to federal repositories. The transportation requirements to make these shipments are also itemized. The next logical step in the overall transportation project was the development of a set of computer codes which would predict likely transportation routes for waste shipments. Two separate routing models are now operational at ORNL. Routes for truck transport can be estimated with the HIGHWAY program, and rail and barge routes can be predicted with the INTERLINE model. This paper discusses examples of the route estimates and applications of the routing models

Optical and Magnetic Properties of Fe Doped ZnO Nanoparticles Obtained by Hydrothermal Synthesis

Directory of Open Access Journals (Sweden)

Xiaojuan Wu

2014-01-01

Full Text Available Diluted magnetic semiconductors Zn1-xFexO nanoparticles with different doping concentration (x=0, 0.01, 0.05, 0.10, and 0.20 were successfully synthesized by hydrothermal method. The crystal structure, morphology, and optical and magnetic properties of the samples were characterized by X-ray diffraction (XRD, energy dispersive spectrometer (EDS, high-resolution transmission electron microscopy (HRTEM, Raman scattering spectra (Raman, photoluminescence spectra (PL, and the vibrating sample magnetometer (VSM. The experiment results show that all samples synthesized by this method possess hexagonal wurtzite crystal structure with good crystallization, no other impurity phases are observed, and the morphology of the sample shows the presence of ellipsoidal nanoparticles. All the Fe3+ successfully substituted for the lattice site of Zn2+ and generates single-phase Zn1-xFexO. Raman spectra shows that the peak shifts to higher frequency. PL spectra exhibit a slight blue shift and the UV emission is annihilated with the increase of Fe3+ concentration. Magnetic measurements indicated that Fe-doped ZnO samples exhibit ferromagnetic behavior at room temperature and the saturation magnetization is enhanced with the increase of iron doping content.

Preparation structure and dielectric behaviour of the system Sr1 ...

Indian Academy of Sciences (India)

Unknown

perovskite oxide system Sr1–xLaxTi1–xFexO3 (x ≤ 0⋅50). XRD studies ..... Here ωis the angular frequency, which is equal to. 2πfmax and τD .... Dipole or dipolar polarisation is also referred to as orientation polarisation involves the ... attributed to the formation of barrier layers at grain–grain-boundaries interfaces similar to.

Vinyl Chloride Barge Loading - Mantua Terminals

Science.gov (United States)

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Overview of the environmental concerns of coal transportation

Energy Technology Data Exchange (ETDEWEB)

Bertram, K.; Dauzvardis, P.; Fradkin, L.; Surles, T.

1980-02-01

More than 30 environmental concerns were analyzed for the transportation of coal by rail, roads (trucks), high voltage transmission lines (that is, from mine-mouth generating plants to distribution networks), coal slurry pipelines, and barges. The following criteria were used to identify these problems: (1) real physical environmetal impacts for which control technologies must be developed, or regulation made effective where control technologies presently exist; (2) the level of impact is uncertain, although the potential impact may be moderate to high; (3) the concerns identified by the first two criteria are specific to or exacerbated by coal transportation. Generic transportation problems are not included. The significant environmental problems identified as a result of this study are: (1) rail transport - community traffic disruption and human health, safety, and habitat destruction; (2) coal haul roads - road degradation, traffic congestion and safety, air quality, and noise; (3) high voltage transmission lines - changed land use without local benefits, biological health and safety effects, and disruption of world weather patterns; (4) slurry pipelines - water availability, water quality, and possible spills from non-water slurry pipelines; and (5) barge transport - impacts common to all barge traffic. (DMC)

Lower Granite dam smolt monitoring program: annual report, 2000; ANNUAL

International Nuclear Information System (INIS)

Morrill, Charles

2000-01-01

The 2000 fish collection season at Lower Granite was characterized by lower than average spring flows and spill, low levels of debris, cool water temperatures, increased unclipped yearling and subyearling chinook smolts, and 8,300,546 smolts collected and transported compared to 5,882,872 in 1999. With the continued release of unclipped supplementation chinook and steelhead above Lower Granite Dam, we can no longer accurately distinguish wild chinook, steelhead, and sockeye/kokanee in the sample. Although some table titles in this report still show ''wild'' column headings, the numbers in these columns for 1999 and 2000 include wild and unclipped hatchery origin smolts. The increases over previous years reflect the increased supplementation. A total of 8,300,546 juvenile salmonids were collected at Lower Granite Dam. Of these, 187,862 fish were bypassed back to the river and 7,950,648 were transported to release sites below Bonneville Dam, 7,778,853 by barge and 171,795 by truck. A total of 151,344 salmonids were examined in daily samples. Nine research projects conducted by four agencies impacted a total of 1,361,006 smolts (16.4% of the total collection)

Stress release and defect occurrence in V1-xFe x films upon hydrogen loading: H-induced superabundant vacancies, movement and creation of dislocations

KAUST Repository

Gemma, Ryota; Dobroň, Patrik; Čí žek, Jakub; Pundt, Astrid A.

2014-01-01

Hydrogen-induced elastic/plastic deformation was studied in V 1-xFex (x = 0.02-0.08) films with thicknesses between 10 and 400 nm and prepared at different temperatures. The combination of several in situ techniques such as X-ray diffraction, acoustic emission, electromotive force and substrate curvature techniques allows sensitive studies of defects generated in these thin films. As well as conventional out-of-plane linear elastic film expansion and in-plane compressive stress increase during hydrogen absorption, the investigations uncovered new details: as soon as hydrogen predominately solved in interstitial lattice sites, discrete stress relaxation (DSR) events were detected, after which the film continued to behave in a linear elastic manner. DSRs were interpreted by uncorrelated movement of pre-existing dislocations. Particularly in the case of films deposited at higher temperatures, in-plane tensile stress was found at very small H concentrations of less than 0.005 H/V. Upon further H uptake, this turned into compressive stress. However, this stress increase differed from theoretical predictions. This behavior is explained by the generation of superabundant vacancies. Dislocation emission and plastic deformation are linked to the formation of the hydride phase in the V1-xFex films. © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The study on intergranular corrosion of sensitized Alloy 600 using DL-EPR and Huey method

International Nuclear Information System (INIS)

Lee, B. G.; Lee, H. R.; Kim, H. P.; Ryu, W. S.; Rhee, C. K.

1998-01-01

Intergranular corrosion(IGC) of sensitized Alloy 600 has been studied with double loop-electrochemical potentiokinetic reactivation(DL-EPR) and Huey tests. Corrosion of solution annealed Ni-XCr-10Fe(X=6∼15) alloys was also evaluated with DL-EPR and Huey methods to simulate corrosion of Cr-depleted grain boundary region of Alloy 600. Cr concentration of Cr-depleted grain boundary region of Alloy 600. Cr concentration profile across grain boundary was measured with TEM. In the range of the Cr concentration from 6 to 8%, corrosion rates of solution annealed Ni-XCr-10Fe(X=6∼15) alloys were much higher in Huey test than those in DL-EPR. But in the range of the Cr concentration from 12 to 15%, the trend was reversed. The width of IGC crack of Alloy 600 was higher in DL-EPR test than in Huey test in agreement with corrosion of solution annealed Ni-XCr-10Fe alloys. Width of IGC produced by DL-EPR test was almost uniform and wide while that produced by Huey test was sharp and marrow. These results suggest that IGC in DL-EPR test conforms to uniform dissolution model and IGC in Huey test conforms to Cr concentration dependent dissolution model

Stress release and defect occurrence in V1-xFe x films upon hydrogen loading: H-induced superabundant vacancies, movement and creation of dislocations

KAUST Repository

Gemma, Ryota

2014-04-01

Hydrogen-induced elastic/plastic deformation was studied in V 1-xFex (x = 0.02-0.08) films with thicknesses between 10 and 400 nm and prepared at different temperatures. The combination of several in situ techniques such as X-ray diffraction, acoustic emission, electromotive force and substrate curvature techniques allows sensitive studies of defects generated in these thin films. As well as conventional out-of-plane linear elastic film expansion and in-plane compressive stress increase during hydrogen absorption, the investigations uncovered new details: as soon as hydrogen predominately solved in interstitial lattice sites, discrete stress relaxation (DSR) events were detected, after which the film continued to behave in a linear elastic manner. DSRs were interpreted by uncorrelated movement of pre-existing dislocations. Particularly in the case of films deposited at higher temperatures, in-plane tensile stress was found at very small H concentrations of less than 0.005 H/V. Upon further H uptake, this turned into compressive stress. However, this stress increase differed from theoretical predictions. This behavior is explained by the generation of superabundant vacancies. Dislocation emission and plastic deformation are linked to the formation of the hydride phase in the V1-xFex films. © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The Influence of Doping with Transition Metal Ions on the Structure and Magnetic Properties of Zinc Oxide Thin Films

Directory of Open Access Journals (Sweden)

Jenica Neamtu

2014-01-01

Full Text Available Zn1−xNixO (x=0.03÷0.10 and Zn1−xFexO (x=0.03÷0.15 thin films were synthesized by sol-gel method. The structure and the surface morphology of zinc oxide thin films doped with transition metal (TM ions have been investigated by X-ray diffraction (XRD and atomic force microscopy (AFM. The magnetic studies were done using vibrating sample magnetometer (VSM at room temperature. Experimental results revealed that the substitution of Ni ions in ZnO wurtzite lattice for the contents x=0.03÷0.10 (Ni2+ leads to weak ferromagnetism of thin films. For Zn1-xFexO with x=0.03÷0.05, the Fe3+ ions are magnetic coupling by superexchange interaction via oxygen ions in wurtzite structure. For x=0.10÷0.15 (Fe3+ one can observe the increasing of secondary phase of ZnFe2O4 spinel. The Zn0.9Fe0.1O film shows a superparamagnetic behavior due to small crystallite sizes and the net spin magnetic moments arisen from the interaction between the iron ions through an oxygen ion in the spinel structure.

BR-100 spent fuel shipping cask development

International Nuclear Information System (INIS)

McGuinn, E.J.; Childress, P.C.

1990-01-01

Continued public acceptance of commercial nuclear power is contingent to a large degree on the US Department of Energy (DOE) establishing an integrated waste management system for spent nuclear fuel. As part of the from-reactor transportation segment of this system, the B ampersand W Fuel Company (BWFC) is under contract to the DOE to develop a spent-fuel cask that is compatible with both rail and barge modes of transportation. Innovative design approaches were the keys to achieving a cask design that maximizes payload capacity and cask performance. The result is the BR-100, a 100-ton rail/barge cask with a capacity of 21 PWR or 52 BWR ten-year cooled, intact fuel assemblies. 3 figs

Alyeska/SERVS technological innovations for oil spill response

International Nuclear Information System (INIS)

Hillman, S.O.

1996-01-01

An overview of technological innovations in spill response by Alyeska Pipeline Service Company/SERVS (ship escort response vessel system), was presented. The company has developed a number of spill response techniques which have needed new strategies and modified equipment for fulfillment of the Prince William Sound Tanker Oil Discharge Prevention and Contingency Plan. One of the strategies was the training of personnel to be ready to deploy massive quantities of equipment on short notice to potential spill sites over an 11,000 square mile water body with more than 3,200 miles of wilderness shoreline. Specific response equipment and decision-making tools have been developed in direct support of large scale programs. Along with oil slick tracking buoys and mini barges, SERVS has developed high capacity skimmers with recovery capacities approaching 2,000 to 3,000 barrels of liquid per hour and strategy boom-towing vessels which divert oil into a long U shaped containment boom. SERVS fishing vessel program, hatchery protection and remote response center equipment program, and wildlife treatment facilities were also described. 10 refs., 13 figs

46 CFR 10.109 - Classification of endorsements.

Science.gov (United States)

2010-10-01

...) Apprentice mate (Steersman); (9) Offshore installation manager (OIM); (10) Barge supervisor (BS); (11...) Professional nurse; (41) Marine physician assistant; (42) Hospital corpsman; and (43) Radar observer. (b) The...

Synthesis, structures, and dearomatization by deprotonation of iron complexes featuring bipyridine-based PNN pincer ligands.

Science.gov (United States)

Zell, Thomas; Langer, Robert; Iron, Mark A; Konstantinovski, Leonid; Shimon, Linda J W; Diskin-Posner, Yael; Leitus, Gregory; Balaraman, Ekambaram; Ben-David, Yehoshoa; Milstein, David

2013-08-19

The synthesis and characterization of new iron pincer complexes bearing bipyridine-based PNN ligands is reported. Three phosphine-substituted pincer ligands, namely, the known (t)Bu-PNN (6-((di-tert-butylphosphino)methyl)-2,2'-bipyridine) and the two new (i)Pr-PNN (6-((di-iso-propylphosphino)methyl)-2,2'-bipyridine) and Ph-PNN (6-((diphenylphosphino)methyl)-2,2'-bipyridine) ligands were synthesized and studied in ligation reactions with iron(II) chloride and bromide. These reactions lead to the formation of two types of complexes: mono-chelated neutral complexes of the type [(R-PNN)Fe(X)2] and bis-chelated dicationic complexes of the type [(R-PNN)2Fe](2+). The complexes [(R-PNN)Fe(X)2] (1: R = (t)Bu, X = Cl, 2: R = (t)Bu, X = Br, 3: R = (i)Pr, X = Cl, and 4: R = (i)Pr, X = Br) are readily prepared from reactions of FeX2 with the free R-PNN ligand in a 1:1 ratio. Magnetic susceptibility measurements show that these complexes have a high-spin ground state (S = 2) at room temperature. Employing a 2-fold or higher excess of (i)Pr-PNN, diamagnetic hexacoordinated dicationic complexes of the type [((i)Pr-PNN)2Fe](X)2 (5: X = Cl, and 6: X = Br) are formed. The reactions of Ph-PNN with FeX2 in a 1:1 ratio lead to similar complexes of the type [(Ph-PNN)2Fe](FeX4) (7: X = Cl, and 8: X = Br). Single crystal X-ray studies of 1, 2, 4, 6, and 8 do not indicate electron transfer from the Fe(II) centers to the neutral bipyridine unit based on the determined bond lengths. Density functional theory (DFT) calculations were performed to compare the relative energies of the mono- and bis-chelated complexes. The doubly deprotonated complexes [(R-PNN*)2Fe] (9: R = (i)Pr, and 10: R = Ph) were synthesized by reactions of the dicationic complexes 6 and 8 with KO(t)Bu. The dearomatized nature of the central pyridine of the pincer ligand was established by X-ray diffraction analysis of single crystals of 10. Reactivity studies show that 9 and 10 have a slightly different behavior in

46 CFR 112.05-5 - Emergency power source.

Science.gov (United States)

2010-10-01

...; tankships; barges with sleeping accommodations for more than 6 persons; mobile offshore drilling units; and... fans, CO2 bottles, space heaters, and internal communication devices, such as sound powered phones. (e...

78 FR 36656 - Safety Zone; Coronado Fourth of July Fireworks, Glorietta Bay; Coronado, CA

Science.gov (United States)

2013-06-19

... (NPRM) on May 17, 2013 (78 FR 29094), that highlighted the movement of the fireworks barge and intention... Notice to Mariners. (c) Definitions. The following definition applies to this section: designated...

Interactive handling of regional cerebral blood flow data using a macrolanguage

International Nuclear Information System (INIS)

Sveinsdottir, E.; Schomacker, T.; Lassen, N.A.

1976-01-01

A general image handling software system has been developed for on-line collection, processing and display of gamma camera images (IMAGE system). The most distinguishable feature of the system is the ability for the user to interactively specify sequences, called macros, of basic functions to be performed. Information about a specified sequence is retained in the system, thus enabling new sequences or macros to be defined using already specified sequences. Facilities for parameter setting and parameter transfer between functions, as well as facilities for repetition of a function, are included. Finally, functions, be it basic or macro, can be specified to be iteratively activated using a physiological trigger signal as f.ex. the ECG. In addition, a special program system was developed for handling the dynamic data, from Xenon-133 studies of regional cerebral blood flow (CBF system). Parametric or functional images derived from the CBF system and depicting estimates of regional cerebral blood flow, relative weights of grey matter or other parameters can after computation be handled in the IMAGE system

Giant magnetic anisotropy and tunnelling of the magnetization in Li2(Li_{1-x}Fe_x)N

OpenAIRE

Jesche, A.; McCallum, R. W.; Thimmaiah, S.; Jacobs, J. L.; Taufour, V.; Kreyssig, A.; Houk, R. S.; Bud'ko, S. L.; Canfield, P. C.

2014-01-01

Large magnetic anisotropy and coercivity are key properties of functional magnetic materials and are generally associated with rare earth elements. Here we show an extreme, uniaxial magnetic anisotropy and the emergence of magnetic hysteresis in Li2(Li1-xFex)N. An extrapolated, magnetic anisotropy field of 220 Tesla and a coercivity field of over 11 Tesla at 2 Kelvin outperform all known hard-ferromagnets and single-molecule magnets (SMMs). Steps in the hysteresis loops and relaxation phenome...

Taking the Curriculum Afloat.

Science.gov (United States)

Fogell, John

1986-01-01

A canal barge trip involving a group of 11- to 14-year-olds with moderate learning difficulties provided opportunities for leisure education, social skill learning, and information gathering and recording tasks. (CL)

List of Inspected Tank Barges and Tankships

Science.gov (United States)

1980-01-01

M 0 cc 40 0 f w 1 Elr2 i x Ei2 x2 22 MrV 22 Z11 7-s- . 22( ti3. (I 7. X’ 00 00 00 V i Z0 X-. Z XW 0 ZAW W’ 1W "J w &xm0. 0 .7. w il WWL I9 1.-1 lli...C:aL ItC tC w It 0lA 41 t~ f 00’ C3 a M !C 04 m, 0’ Lf 0 16% Lf TUN ; 7 -a N.4 NO % 1.4a,0 ry uh C0 04 V .. Ml 1 % 4 HI0 10 4 tm .t 1 4 in4r 0 114 Zw

77 FR 70453 - Chemical Transportation Advisory Committee

Science.gov (United States)

2012-11-26

... and Biofuel blends. Shipments and use as fuel of Liquefied Natural Gas and Compressed Natural Gas. d. Air emissions. e. Tank Barge best practices. f. Certification of 3rd party witnesses for the...

77 FR 25829 - Takes of Marine Mammals Incidental to Specified Activities; Taking Marine Mammals Incidental to...

Science.gov (United States)

2012-05-01

... processing. This recorder will be installed on a boat-barge combination and positioned close to the area... mounted on a vessel. This allows for an interpolation of the receiver locations between the acoustical...

46 CFR 7.5 - Rules for establishing boundary lines.

Science.gov (United States)

2010-10-01

... territorial sea is measured. (b) Barges of 100 gross tons and over operating on the sheltered waters of... and lines continuing the general trend of the seaward, highwater shorelines across entrances to small...

Determination of hyperfine fields and atomic ordering in NiMnFeGe exhibiting martensitic transformation

Directory of Open Access Journals (Sweden)

Satuła Dariusz

2015-03-01

Full Text Available The hyperfine fields and atomic ordering in Ni1−xFexMnGe (x = 0.1, 0.2, 0.3 alloys were investigated using X-ray diffraction and Mössbauer spectroscopy at room temperature. The X-ray diffraction measurements show that the samples with x = 0.2, 0.3 crystallized in the hexagonal Ni2In-type of structure, whereas in the sample with x = 0.1, the coexistence of two phases, Ni2In- and orthorhombic TiNiSi-type of structures, were found. The Mössbauer spectra measured with x = 0.2, 0.3 show three doublets with different values of isomer shift (IS and quadrupole splitting (QS related to three different local surroundings of Fe atoms in the hexagonal Ni2In-type structure. It was shown that Fe atoms in the hexagonal Ni2In-type structure of as-cast Ni1−xFexMnGe alloys are preferentially located in Ni sites and small amount of Fe is located in Mn and probably in Ge sites. The spectrum for x = 0.1 shows the doublets in the central part of spectrum and a broad sextet. The doublets originate from the Fe atoms in the paramagnetic state of hexagonal Ni2In-type structure, whereas the sextet results from the Fe atoms in orthorhombic TiNiSi-type structure.

Electron impact ionisation cross sections of iron oxides

Science.gov (United States)

Huber, Stefan E.; Mauracher, Andreas; Sukuba, Ivan; Urban, Jan; Maihom, Thana; Probst, Michael

2017-12-01

We report electron impact ionisation cross sections (EICSs) of iron oxide molecules, FexOx and FexOx+1 with x = 1, 2, 3, from the ionisation threshold to 10 keV, obtained with the Deutsch-Märk (DM) and binary-encounter-Bethe (BEB) methods. The maxima of the EICSs range from 3.10 to 9 . 96 × 10-16 cm2 located at 59-72 eV and 5.06 to 14.32 × 10-16 cm2 located at 85-108 eV for the DM and BEB approaches, respectively. The orbital and kinetic energies required for the BEB method are obtained by employing effective core potentials for the inner core electrons in the quantum chemical calculations. The BEB cross sections are 1.4-1.7 times larger than the DM cross sections which can be related to the decreasing population of the Fe 4s orbitals upon addition of oxygen atoms, together with the different methodological foundations of the two methods. Both the DM and BEB cross sections can be fitted excellently to a simple analytical expression used in modelling and simulation codes employed in the framework of nuclear fusion research. Supplementary material in the form of one pdf file available from the Journal web page at http://https://doi.org/10.1140/epjd/e2017-80308-2.

A systematic study of the controlled generation of crystalline iron oxide nanoparticles on graphene using a chemical etching process

Directory of Open Access Journals (Sweden)

Peter Krauß

2017-09-01

Full Text Available Chemical vapor deposition (CVD of carbon precursors employing a metal catalyst is a well-established method for synthesizing high-quality single-layer graphene. Yet the main challenge of the CVD process is the required transfer of a graphene layer from the substrate surface onto a chosen target substrate. This process is delicate and can severely degrade the quality of the transferred graphene. The protective polymer coatings typically used generate residues and contamination on the ultrathin graphene layer. In this work, we have developed a graphene transfer process which works without a coating and allows the transfer of graphene onto arbitrary substrates without the need for any additional post-processing. During the course of our transfer studies, we found that the etching process that is usually employed can lead to contamination of the graphene layer with the Faradaic etchant component FeCl3, resulting in the deposition of iron oxide FexOy nanoparticles on the graphene surface. We systematically analyzed the removal of the copper substrate layer and verified that crystalline iron oxide nanoparticles could be generated in controllable density on the graphene surface when this process is optimized. It was further confirmed that the FexOy particles on graphene are active in the catalytic growth of carbon nanotubes when employing a water-assisted CVD process.

Allelic variation of the Waxy gene in foxtail millet [Setaria italica (L.) P. Beauv.] by single nucleotide polymorphisms.

Science.gov (United States)

Van, K; Onoda, S; Kim, M Y; Kim, K D; Lee, S-H

2008-03-01

The Waxy (Wx) gene product controls the formation of a straight chain polymer of amylose in the starch pathway. Dominance/recessiveness of the Wx allele is associated with amylose content, leading to non-waxy/waxy phenotypes. For a total of 113 foxtail millet accessions, agronomic traits and the molecular differences of the Wx gene were surveyed to evaluate genetic diversities. Molecular types were associated with phenotypes determined by four specific primer sets (non-waxy, Type I; low amylose, Type VI; waxy, Type IV or V). Additionally, the insertion of transposable element in waxy was confirmed by ex1/TSI2R, TSI2F/ex2, ex2int2/TSI7R and TSI7F/ex4r. Seventeen single nucleotide polymorphims (SNPs) were observed from non-coding regions, while three SNPs from coding regions were non-synonymous. Interestingly, the phenotype of No. 88 was still non-waxy, although seven nucleotides (AATTGGT) insertion at 2,993 bp led to 78 amino acids shorter. The rapid decline of r (2) in the sequenced region (exon 1-intron 1-exon 2) suggested a low level of linkage disequilibrium and limited haplotype structure. K (s) values and estimation of evolutionary events indicate early divergence of S. italica among cereal crops. This study suggested the Wx gene was one of the targets in the selection process during domestication.

Ferromagnetism versus slow paramagnetic relaxation in Fe-doped Li3N

Science.gov (United States)

Fix, M.; Jesche, A.; Jantz, S. G.; Bräuninger, S. A.; Klauss, H.-H.; Manna, R. S.; Pietsch, I. M.; Höppe, H. A.; Canfield, P. C.

2018-02-01

We report on isothermal magnetization, Mössbauer spectroscopy, and magnetostriction as well as temperature-dependent alternating-current (ac) susceptibility, specific heat, and thermal expansion of single crystalline and polycrystalline Li2(Li1 -xFex) N with x =0 and x ≈0.30 . Magnetic hysteresis emerges at temperatures below T ≈50 K with coercivity fields of up to μ0H =11.6 T at T =2 K and magnetic anisotropy energies of 310 K (27 meV). The ac susceptibility is strongly frequency-dependent (f =10 -10 000 Hz) and reveals an effective energy barrier for spin reversal of Δ E ≈1100 K (90 meV). The relaxation times follow Arrhenius behavior for T >25 K . For T <10 K , however, the relaxation times of τ ≈1010 s are only weakly temperature-dependent, indicating the relevance of a quantum tunneling process instead of thermal excitations. The magnetic entropy amounts to more than 25 J molFe-1 K-1, which significantly exceeds R ln 2 , the value expected for the entropy of a ground-state doublet. Thermal expansion and magnetostriction indicate a weak magnetoelastic coupling in accordance with slow relaxation of the magnetization. The classification of Li2(Li1 -xFex) N as ferromagnet is stressed and contrasted with highly anisotropic and slowly relaxing paramagnetic behavior.

75 FR 18191 - City of Raleigh; Community Hydro, LLC; Notice of Competing Preliminary Permit Applications...

Science.gov (United States)

2010-04-09

...: Mr. Thomas A. McCormick, Raleigh City Attorney, P.O. Box 590, Raleigh, North Carolina 27601, e-mail tom.mccormick@ci.raleigh.nc.us . For Community Hydro, LLC: Lori Barg, Community Hydro, LLC, 113...

Port Authority Best Practices

Science.gov (United States)

Best practices for port authorities include near-port community collaboration, anti-idling policies, expanding off-peak hours, development of EMS, developing an emissions inventory, education, electric power and substituting trucking for rail or barge.

Modal Investment Comparison : The Impact of Upper Mississippi River Lock and Dam Shutdowns on State Highway Infrastructure.

Science.gov (United States)

2017-10-30

This project reviews southbound agricultural shipments from the Upper Mississippi River originating from the states of Illinois, Iowa, Minnesota, Missouri, and Wisconsin to understand the potential impacts of shifting barge shipments to the parallel ...

Un Algoritmo Evolutivo para Resolver el Problema de Coloración Robusta

Directory of Open Access Journals (Sweden)

Pedro Lara Velázquez

2012-03-01

Full Text Available Let G and \\bar{G} be two complementary graphs. Given a penalty function defined over the edges of \\bar{G}, it is said that the rigidity of a k-coloring of G is the summation ofthe penalties of the edges of G that join vertices whose endpoint are equally colored. Based on this previous definition, the Robust Coloring Problem is set when searching the valid k-coloring of minimum rigidity. Yáñez and Ramírez proved that this is an NP-hard problem. In this work we present an evolutive algorithm based in the scatter search technique, which obtains optimal solutions for those instances for which an optimal solution is known, and obtains the best known solutions compared to other heuristics, such as: simulated annealing, tabu search and partial enumeration.

Thermophysical Properties of Matter - the TPRC Data Series. Volume 5. Specific Heat - Nonmetallic Solids

Science.gov (United States)

1970-01-01

114 35 Lanthanum Oxide La 2O3 . . . . . . . . . . . . . . . .. . . . 118 xviii Grouping of Materials and List of Figures and Tables 2. OXIDES...triebloride hiexahyc rate (Er Cls 611 20 5 822 Freon 20 (see Chloroform) Erbium gallate (see Trierbium pentagallium dodecaoxide) Freon 21 (Cl 2CHr) 6 212...FexSe) 5 530 Kalium (see Potassium) Iron silicides: Krypton 6 34 FeSi 5 577 Lanthana (see Lanthanum oxide) Fe3Si 5 583 Lanthanum 4 110 Fe6Si3 5 580

Monitoring of Olympic National Park Beaches to determine fate and effects of spilled bunker C fuel oil

Energy Technology Data Exchange (ETDEWEB)

Strand, J.A.; Cullinan, V.I.; Crecelius, E.A.; Fortman, T.J.; Citterman, R.J.; Fleischmann, M.L.

1990-10-01

On December 23, 1988, the barge Nestucca was accidentally struck by its tow, a Souse Brothers Towing Company tug, releasing approximately 230,000 gallons of Bunker C fuel oil and fouling beaches from Grays Harbor north to Vancouver Island. Affected beaches in Washington included a 40-mile-long strip that has been recently added to Olympic National Park. The purpose of the monitoring program documented in this report was to determine the fate of spilled Bunker C fuel oil on selected Washington coastal beaches. We sought to determine (1) how much oil remained in intertidal and shallow subtidal habitats following clean-up and weathering, (2) to what extent intertidal and/or shallow subtidal biotic assemblages have been contaminated, and (3) how rapidly the oil has left the ecosystem. 45 refs., 18 figs., 8 tabs.

76 FR 32313 - Safety Zone; Chelsea St. Bridge Demolition, Chelsea River, Chelsea, MA

Science.gov (United States)

2011-06-06

... preamble as being available in the docket are part of docket USCG-2011-0420 are available online by going... barges, work vessels, and construction equipment, and large pieces of debris falling into the water that...

33 CFR 157.08 - Applicability of subpart B.

Science.gov (United States)

2010-07-01

... (CONTINUED) POLLUTION RULES FOR THE PROTECTION OF THE MARINE ENVIRONMENT RELATING TO TANK VESSELS CARRYING... barge of less than 1,500 gross tons as measured under 46 U.S.C., Chapter 145, carrying refined petroleum...

PCB contamination and effects on benthic invertebrate communities at the Irving Whale salvage site

National Research Council Canada - National Science Library

Ernst, W

2000-01-01

In June of 1998 and 1999, two and three years after the raising of the Irving Whale, sediment sampling was conducted at the site where the barge was recovered to determine the extent and distribution...

Chief Joseph Kokanee Enhancement Project; Strobe Light Deterrent Efficacy Test and Fish Behavior Determination at the Grand Coulee Dam Third Powerplant Forebay, 2002-2003 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Johnson, R.; McKinstry, C.; Simmons, C. (Pacific Northwest National Laboratory)

2003-01-01

Since 1995, the Confederated Tribes of the Colville Reservation (Colville Confederated Tribes) have managed the Chief Joseph Kokanee Enhancement Project as part of the Northwest Power Planning Council (NWPPC) Fish and Wildlife Program. Project objectives have focused on understanding natural production of kokanee (a land-locked sockeye salmon) and other fish stocks in the area above Grand Coulee and Chief Joseph Dams on the Columbia River. A 42-month investigation concluded that entrainment at Grand Coulee Dam ranged from 211,685 to 576,676 fish annually. Further analysis revealed that 85% of the total entrainment occurred at the dam's third powerplant. These numbers represent a significant loss to the tribal fisheries upstream of the dam. In response to a suggestion by the NWPPC Independent Scientific Review Panel, the scope of work for the Chief Joseph Kokanee Enhancement Project was expanded to include a multiyear pilot test of a strobe light system to help mitigate fish entrainment. This report details the work conducted during the second year of the study by researchers of the Colville Confederated Tribes in collaboration with the Pacific Northwest National Laboratory. The 2002 study period extended from May 18 through July 30. The objective of the study was to determine the efficacy of a prototype strobe light system to elicit a negative phototactic response in kokanee and rainbow trout. The prototype system consisted of six strobe lights affixed to an aluminum frame suspended vertically underwater from a barge secured in the center of the entrance to the third powerplant forebay. The lights, controlled by a computer, were aimed to illuminate a specific region directly upstream of the barge. Three light level treatments were used: 6 of 6 lights on, 3 of 6 lights on, and all lights off. These three treatment conditions were applied for an entire 24-hr day and were randomly assigned within a 3-day block throughout the study period. A seven

Recycling of beverage containers in the Northwest Territories

Energy Technology Data Exchange (ETDEWEB)

1987-02-01

This study researched existing recycling systems, presented pertinent data on the beverage and transportation industries, and evaluated the potential of recycling beverage bottles and cans in the Northwest Territories. The study first describes the history and existing concepts of recycling, provides a general description of recycling methods with advantages and disadvantages, and highlights particular approaches taken by other provinces. Markets for the Northwest Territories are also discussed, including the potential of recoverable material, anticipated recovery rates, transportation to markets, and present recycling operations. Three strategies are identified for the southwest, northwest, and the eastern Region. Recycling is preferred for aluminium cans, glass beer bottles, plastic bottles, and glass wine and liquor bottles in that order. The report recommends a limited program for aluminium cans and beer bottles to begin immediately. Beer bottles should be refilled either in Alberta or the Northwestern Territories and aluminium cans should be compacted and shipped to recycling markets in southern Canada or the United States. The program should first be implemented in areas serviced by Alberta and accessible by truck or barge from Hay River. A program implementation plan is also included. 8 refs., 2 figs., 14 tabs.

When the Night Falls

Institute of Scientific and Technical Information of China (English)

JOHN; BUTCHER

2008-01-01

Evenings in Beijing today are more about beer and dancing than tea and taiji Dug out in the Yuan Dynasty(1279-1368), Houhai Lake onceserved as berth for barges from theGrand Canal, bringing goods from

Swarm Manipulation of Large Surface Vessels

National Research Council Canada - National Science Library

Smith, Erik T

2007-01-01

The goal of this Trident project was to develop an independent control scheme to allow a team of autonomous tugboats to move a large disabled vessel, such as a barge, to a desired position and orientation...

40 CFR 61.270 - Applicability and designation of sources.

Science.gov (United States)

2010-07-01

... specific gravity within the range of specific gravities specified in ASTM D836-84 for Industrial Grade... attached to motor vehicles such as trucks, rail cars, barges, or ships. (e) This subpart does not apply to...

Army Corps of Engineers: Factors Contributing to Cost Increases and Schedule Delays in the Olmsted Locks and Dam Project

Science.gov (United States)

2017-02-01

creating a pool of water deep enough to allow boats and barges to move upstream or downstream. Once the Olmsted dam is completed, the wickets will be...34Ben C. Gerwick, Inc., Glosten Associates, Hsieh Wen Shen

Development of FB-MultiPier dynamic vessel-collision analysis models, phase 2.

Science.gov (United States)

2014-07-01

Massive waterway vessels such as barges regularly transit navigable waterways in the U.S. During passages that fall within : the vicinity of bridge structures, vessels may (under extreme circumstances) deviate from the intended vessel transit path. A...

Calculation for Hull Strength Construction in Offshore Structures

African Journals Online (AJOL)

PROF. O. E. OSUAGWU

2013-09-01

Sep 1, 2013 ... of hull plating, reinforcing stiffeners, girders, and other structures. This paper therefore used the .... From these equations we derive that. Safety of. Factor. Stress ..... machineries, systems etc. of the ships or barge under design.

Design of duplex low carbon steels for improved strength: weight applications

Energy Technology Data Exchange (ETDEWEB)

Koo, J.

1977-08-01

Duplex ferrite-martensite (DFM) steels with excellent combinations of strength and formability have been selected from first principles, and their microstructure-property relationships established through a systematic investigation of a series of ternary Fe/X/0.1 C steels (X being varying amount of Cr and Si). Duplex processing consists of initial austenitization and quenching to form 100% martensite, followed by annealing in the (..cap alpha.. + ..gamma..) range and subsequent quenching. The resultant DFM morphology is controlled by the type and amount of alloying element X.

Excess Claims and Data Trimming in the Context of Credibility Rating Procedures,

Science.gov (United States)

1981-11-01

Triining in the Context of Credibility Rating Procedures by Hans BShlmann, Alois Gisler, William S. Jewell* 1. Motivation In Ratemaking and in Experience...work on the ETH computer. __.1: " Zen * ’ ’ II / -2- 2. The Basic Model Throughout the paper we work with the most simple model in the credibility...additional structure are summed up by stating that the density -3- f 8 (x) has the following form 1) fe(x) -(1-r)po (x/e) + rape(x) 3. The Basic Problem As

Logistics Company Carrier Partner 2.0.15 Tool: Technical Documentation 2015 Data Year - United States Version

Science.gov (United States)

This SmartWay Logistics 2.0.15 Tool is intended to help logistics companies estimate and assess their emission performance levels as well as their total emissions associated with goods movement in the U.S. freight rail, barge, air and t

Phase diagram of (Li(1-x)Fe(x))OHFeSe: a bridge between iron selenide and arsenide superconductors.

Science.gov (United States)

Dong, Xiaoli; Zhou, Huaxue; Yang, Huaixin; Yuan, Jie; Jin, Kui; Zhou, Fang; Yuan, Dongna; Wei, Linlin; Li, Jianqi; Wang, Xinqiang; Zhang, Guangming; Zhao, Zhongxian

2015-01-14

Previous experimental results have shown important differences between iron selenide and arsenide superconductors which seem to suggest that the high-temperature superconductivity in these two subgroups of iron-based families may arise from different electronic ground states. Here we report the complete phase diagram of a newly synthesized superconducting (SC) system, (Li1-xFex)OHFeSe, with a structure similar to that of FeAs-based superconductors. In the non-SC samples, an antiferromagnetic (AFM) spin-density-wave (SDW) transition occurs at ∼127 K. This is the first example to demonstrate such an SDW phase in an FeSe-based superconductor system. Transmission electron microscopy shows that a well-known √5×√5 iron vacancy ordered state, resulting in an AFM order at ∼500 K in AyFe2-xSe2 (A = metal ions) superconductor systems, is absent in both non-SC and SC samples, but a unique superstructure with a modulation wave vector q = (1)/2(1,1,0), identical to that seen in the SC phase of KyFe2-xSe2, is dominant in the optimal SC sample (with an SC transition temperature Tc = 40 K). Hence, we conclude that the high-Tc superconductivity in (Li1-xFex)OHFeSe stems from the similarly weak AFM fluctuations as FeAs-based superconductors, suggesting a universal physical picture for both iron selenide and arsenide superconductors.

Surface chemistry and corrosion behavior of Inconel 625 and 718 in subcritical, supercritical, and ultrasupercritical water

Science.gov (United States)

Rodriguez, David; Merwin, Augustus; Karmiol, Zachary; Chidambaram, Dev

2017-05-01

Corrosion behavior of Inconel 625 and 718 in subcritical, supercritical and ultrasupercritical water was studied as a function of temperature and time. The change in the chemistry of the as-received surface film on Inconel 625 and 718 after exposure to subcritical water at 325 °C and supercritical water at 425 °C and 527.5 °C for 2 h was studied. After exposure to 325 °C subcritical water, the CrO42- based film formed; however minor quantities of NiFexCr2-xO4 spinel compounds were observed. The oxide film formed on both alloys when exposed to supercritical water at 425 °C consisted of NiFexCr2-xO4 spinel. The surface films on both alloys were identified as NiFe2O4 when exposed to supercritical water at 527.5 °C. To characterize the fully developed oxide layer, studies were conducted at test solution temperatures of 527.5 and 600 °C. Samples were exposed to these temperatures for 24, 96, and 200 h. Surface chemistry was analyzed using X-ray diffraction, as well as Raman and X-ray photoelectron spectroscopies. Inconel 718 exhibited greater mass gain than Inconel 625 for all temperatures and exposure times. The differences in corrosion behavior of the two alloys are attributed to the lower content of chromium and increased iron content of Inconel 718 as compared to Inconel 625.

Comparative assessment of the efficiency of Fe-doped TiO2 prepared by two doping methods and photocatalytic degradation of phenol in domestic water suspensions

Directory of Open Access Journals (Sweden)

Mst. Shamsun Nahar, Kiyoshi Hasegawa, Shigehiro Kagaya and Shigeyasu Kuroda

2007-01-01

Full Text Available Fe-doped TiO2 particles responding to visible light were synthesized by impregnation and calcination method using TiO2 particle and Ti element, respectively. The optical and the chemical properties were characterized by measuring the X-ray diffraction (XRD and UV–visible spectroscopy. The onset of absorption shifted to longer wavelengths on doping TiO2 by the calcination process, which showed a better response as compared to the impregnation method. The photocatalytic reactivity was evaluated by the degradation of phenol with impregnated Fe-doped (0.5% w/w in Fe and calcined Fe-doped (FexTi1−xO2, x=0.005 (Fe/Ti molar ratio TiO2 separately in distilled and tap water. The characterization results have confirmed the advanced possibility of correlation between photoactivity and the special property of sulfur-containing calcined Fe-doped TiO2. In case of the coagulation of the undoped A-I and the Fe-doped B-I, the photoactivity showed a decrease due to the presence of natural electrolytes and due to the high pH of tap water, whereas in the case of the coagulation of calcined Fe-doped TiO2 prepared from sulfides (FexTiS2, the photoactivity showed an increase. In this study, highest catalytic activity was found to be strongly dependent both on catalyst structure and on the type of water used.

Identification and Antimicrobial Resistance of Bacteria Isolated from Probiotic Products Used in Shrimp Culture

DEFF Research Database (Denmark)

Noor Uddin, Gazi Md; Larsen, Marianne Halberg; Christensen, Henrik

2015-01-01

in aquaculture ponds. Concerns have been raised that the declared information on probiotic product labels are incorrect and information on bacterial composition are often missing. We therefore evaluated seven probiotics commonly used in Vietnamese shrimp culture for their bacterial species content, phenotypic...... that they contained macrolide (ermD), tetracycline (tetL), phenicol (fexA) and trimethoprim (dfrD, dfrG and dfrK) resistance genes, but not known structures associated with horizontal gene transfer. Probiotic bacterial strains used in Vietnamese shrimp culture seem to contribute with very limited types and numbers...

Behavioral program synthesis with genetic programming

CERN Document Server

Krawiec, Krzysztof

2016-01-01

Genetic programming (GP) is a popular heuristic methodology of program synthesis with origins in evolutionary computation. In this generate-and-test approach, candidate programs are iteratively produced and evaluated. The latter involves running programs on tests, where they exhibit complex behaviors reflected in changes of variables, registers, or memory. That behavior not only ultimately determines program output, but may also reveal its `hidden qualities' and important characteristics of the considered synthesis problem. However, the conventional GP is oblivious to most of that information and usually cares only about the number of tests passed by a program. This `evaluation bottleneck' leaves search algorithm underinformed about the actual and potential qualities of candidate programs. This book proposes behavioral program synthesis, a conceptual framework that opens GP to detailed information on program behavior in order to make program synthesis more efficient. Several existing and novel mechanisms subs...

Report to Congress on Arctic Operations and the Northwest Passage

Science.gov (United States)

2011-05-19

t]he ocean, our coasts, and the Great Lakes provide jobs, food, energy resources, ecological services, recreation, and tourism opportunities, and...a high degree of expensive prefabricated construction. During ice-free periods, the most economical means of transportation is by barge. During

40 CFR 63.111 - Definitions.

Science.gov (United States)

2010-07-01

... organic compounds. Air oxidation reactor includes the product separator and any associated vacuum pump or... connected ducts and piping. A chemical manufacturing process unit includes pumps, compressors, agitators.... Examples of containers are drums, barrels, tank trucks, barges, dumpsters, tank cars, dump trucks, and...

Effects of bridge piers on a tropical estuary in Goa, India

Digital Repository Service at National Institute of Oceanography (India)

Pathak, M.C.; Kotnala, K.L.; Prabaharan, N.

. These types of changes can cause problems in river navigation. The results obtained may be useful for planning and designing of new bridge piers especially in view of the fact that the river is constantly used for barge transportation of iron ore...

Ship Lock as General Queuing System with Batch Arrivals and Batch Service

Directory of Open Access Journals (Sweden)

Zoran Radmilović

2007-11-01

Full Text Available The real lock operations with ships and barge convoys areconsidered dependent on the transport technologies applied, ormore precisely, the kinds of ships/convoys requiring thelockage. The fleet can be divided as follows: (1 groups of singleships, (2 pushed and pulled tows of barges and (3 differentcombinations of previous systems (1 and (2. The groups ofships and tows passing through the lock have extremely stochasticcharacteristics thus forming various arrivals and setvicetime patterns. It means that uniform navigation or strongscheduling between locks and lock operations are not possibleeven though highly sophisticated equipment is at disposal.Therefore, in this paper an analytical method was developedusing bulk queuing systems for the analysis and planning oflock requirements supporting it with numerical example. Thedeveloped methodology can be applied to determine the meanqueue length of ships - convoys at lock anchorage, withoutblocking behaviour between upstream and downstream navigationfor single-lane traffic.

Freight Calculation Model: A Case Study of Coal Distribution

Science.gov (United States)

Yunianto, I. T.; Lazuardi, S. D.; Hadi, F.

2018-03-01

Coal has been known as one of energy alternatives that has been used as energy source for several power plants in Indonesia. During its transportation from coal sites to power plant locations is required the eligible shipping line services that are able to provide the best freight rate. Therefore, this study aims to obtain the standardized formulations for determining the ocean freight especially for coal distribution based on the theoretical concept. The freight calculation model considers three alternative transport modes commonly used in coal distribution: tug-barge, vessel and self-propelled barge. The result shows there are two cost components very dominant in determining the value of freight with the proportion reaching 90% or even more, namely: time charter hire and fuel cost. Moreover, there are three main factors that have significant impacts on the freight calculation, which are waiting time at ports, time charter rate and fuel oil price.

Determination of barge impact probabilities for bridge design.

Science.gov (United States)

2016-04-01

Waterway bridges in the United States are designed to resist vessel collision loads according to design provisions released by the American Association of State : Highway and Transportation Officials (AASHTO). These provisions provide detailed proced...

Long-term transport of oil from T/B DBL-152 : lessons learned for oils heavier than seawater

International Nuclear Information System (INIS)

Beegle-Krause, C.J.; Barker, C.H.; Watabayashi, G.; Lehr, W.

2006-01-01

In November 2005, during Hurricane Rita, the tank barge DBL-152 struck a drilling rig that sank, spilling an estimated 3 million gallons of high density, low viscosity oil. A large portion of the oil sank to the sea floor, forming large discrete mats along with smaller globules in other areas, which suggested that long-period wave energy events redistributed the sunken oil. This paper presented details of a study conducted to examine the long-term transport mechanisms of the Louisiana Shelf relating to the spill, as well as potential shoreline and environmental impacts on coastal beaches and nature sanctuaries. An examination of local existing sediments was conducted along with an analysis of wave data and current metre data. Previous spills of relatively heavy oils were compared to the spill, including: Barge Bouchard 155; IXTOC 1 exploratory well; Morris Berman Barge; T/B MCN-5; T/V Alvenus; T/V Berge Banker; and T/V Mobiloil; T/V Sansinena. An examination of the case studies suggested that the oil was expected to remain stationary on the bottom of the sea floor until bottom wave energy generated by storms causes the oil to break up and mix the oil into the water column. It was observed that net transport on the Louisiana-Texas shelf is down-coast and offshore. The oil will remain for a significant period once it is deep enough on the shelf to be infrequently disturbed by storm-induced waves. It was noted that shoreline contacts above background are not anticipated. 12 refs., 6 figs

77 FR 31493 - Safety Zones; Fourth of July Fireworks Displays Within the Captain of the Port Charleston Zone, SC

Science.gov (United States)

2012-05-29

... temporary safety zones during Fourth of July Fireworks Displays on certain navigable waterways in Hilton... below. 1. Hilton Head Island, South Carolina. All waters within a 500 yard radius around the barge from... each safety zone. All coordinates are North American Datum 1983. [[Page 31496

76 FR 31985 - Irving Oil Limited and Irving Oil Terminals Inc.; Analysis of Proposed Agreement Containing...

Science.gov (United States)

2011-06-02

.... Finally, the proposed Consent Agreement imposes firewall and monitor provisions to prevent Irving from... is generally less costly than shipping it from domestic ports on smaller barges, most Maine suppliers... anticompetitive effects of the original transaction. Entering these markets is costly, difficult, and unlikely due...

49 CFR 176.99 - Permit requirements for certain hazardous materials.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Permit requirements for certain hazardous materials. 176.99 Section 176.99 Transportation Other Regulations Relating to Transportation PIPELINE AND... CARRIAGE BY VESSEL Special Requirements for Barges § 176.99 Permit requirements for certain hazardous...

78 FR 38830 - Safety Zone; Execpro Services Fireworks Display, Lake Tahoe, Incline Village, NV

Science.gov (United States)

2013-06-28

...-7442 or email at [email protected] . If you have questions on viewing or submitting material...) as depicted in National Oceanic and Atmospheric Administration (NOAA) Chart 18665. This safety zone... around the fireworks barge is necessary to protect spectators, vessels, and other property from the...

78 FR 30273 - Takes of Marine Mammals Incidental to Specified Activities; Taking Marine Mammals Incidental to a...

Science.gov (United States)

2013-05-22

..., breathing, nursing, breeding, feeding, or sheltering [Level B harassment].'' Summary of Request We received... fish populations; however, the entire barge mooring project is scheduled to be completed by September...), biological (e.g., sounds produced by marine mammals, fish, and invertebrates), and anthropogenic sound (e.g...

Scheduling with Time Lags

NARCIS (Netherlands)

X. Zhang (Xiandong)

2010-01-01

textabstractScheduling is essential when activities need to be allocated to scarce resources over time. Motivated by the problem of scheduling barges along container terminals in the Port of Rotterdam, this thesis designs and analyzes algorithms for various on-line and off-line scheduling problems

Synchro Mania - Design and evaluation of a serious game creating a mind shift in transport planning

NARCIS (Netherlands)

Buiel, E.F.T.; Visschedijk, G.C.; Lebesque, L.H.E.M.; Lucassen, I.M.P.J.; Riessen, B. van; Rijn, A. van; Brake, G.M. te

2015-01-01

In order to achieve a further reduction of delivery time, costs and emissions of the hinterland transportation of containers, The Port of Rotterdam Authority aims to raise the utilization rate of inland barge and rail capacity. Efficient transport planning methods are essential to achieve this.

Agent Technology supports Inter-Organizational Planning in the Port

NARCIS (Netherlands)

J.M. Moonen (Hans); B. van de Rakt (Bastiaan); I. Miller; J.A.E.E. van Nunen (Jo); J. van Hillegersberg (Jos)

2005-01-01

textabstractThe Port of Rotterdam is a key container transshipment hub for Europe. Inland container shipping is important to connect the hinterland (40% market share). Barges visit several terminals per round-trip through the Port, thus requiring a proper planning support – to avoid planning

27 CFR 20.11 - Meaning of terms.

Science.gov (United States)

2010-04-01

..., tank truck, tank ship, or tank barge, or a compartment of any such conveyance, or any other container... to rum. Secretary. The Secretary of the Treasury or his delegate. Special industrial solvents. Solvents which are manufactured with specially denatured alcohol under special industrial solvent general...

76 FR 73570 - Pipeline Safety: Miscellaneous Changes to Pipeline Safety Regulations

Science.gov (United States)

2011-11-29

... transporting such commodities (i.e., truck, rail, or barge) would expand over time to include greater use of... (National Biodiesel Board and Renewable Fuels Association) submitted separate comments. Two standards... commenters stated that a similar classification was not warranted for pure biodiesel, which has chemical...

The transportation issue management system: A tool for issue resolution

International Nuclear Information System (INIS)

Branch, K.M.; Boryczka, M.K.

1987-01-01

During the last decade, issue management programs have been developed and used by a number of large corporations in the United States. These systems have generally been designed to help senior program managers identify issues, develop strategic plans, and resolve issues. These systems involve scanning and abstracting literature to create a database that is then used for 1) issue identification, 2) issue analysis, 3) priority assessment, 4) development of corporate position/strategic options, and 5) action planning and implementation. Most of the existing systems rely on staff to identify trends in the computerized output, analyze the importance of the issue to the company, and assist in developing corporate responses. The Department of Energy has recently developed an issue management system for the Office of Civilian Radioactive Waste Management's (OCRWM) transportation program. This system is designed to help DOE identify institutional issues related to radioactive waste transportation, analyze the issues, and resolve them in a manner that is responsive to interested parties. The system will contain pertinent information from DOE technical reports, other federal documents, correspondence, professional journals, popular literature, newsclips, legislation and testimony. The program is designed around a number of institutional issues including: prenotification, physical protection procedures; highway, rail, and barge routing; inspections and enforcement of shipments; emergency response; liability, cask design and testing; overweight trucks; rail service; modal mix; infrastructure improvements; training standards, and operational procedures

Simulation of multistatic and backscattering cross sections for airborne radar

Science.gov (United States)

Biggs, Albert W.

1986-07-01

In order to determine susceptibilities of airborne radar to electronic countermeasures and electronic counter-countermeasures simulations of multistatic and backscattering cross sections were developed as digital modules in the form of algorithms. Cross section algorithms are described for prolate (cigar shape) and oblate (disk shape) spheroids. Backscattering cross section algorithms are also described for different categories of terrain. Backscattering cross section computer programs were written for terrain categorized as vegetation, sea ice, glacial ice, geological (rocks, sand, hills, etc.), oceans, man-made structures, and water bodies. PROGRAM SIGTERRA is a file for backscattering cross section modules of terrain (TERRA) such as vegetation (AGCROP), oceans (OCEAN), Arctic sea ice (SEAICE), glacial snow (GLASNO), geological structures (GEOL), man-made structures (MAMMAD), or water bodies (WATER). AGCROP describes agricultural crops, trees or forests, prairies or grassland, and shrubs or bush cover. OCEAN has the SLAR or SAR looking downwind, upwind, and crosswind at the ocean surface. SEAICE looks at winter ice and old or polar ice. GLASNO is divided into a glacial ice and snow or snowfields. MANMAD includes buildings, houses, roads, railroad tracks, airfields and hangars, telephone and power lines, barges, trucks, trains, and automobiles. WATER has lakes, rivers, canals, and swamps. PROGRAM SIGAIR is a similar file for airborne targets such as prolate and oblate spheroids.

Butyltins in water, biofilm, animals and sediments of the west coast of India

Digital Repository Service at National Institute of Oceanography (India)

Bhosle, N.B.; Garg, A.; Jadhav, S.; Harjee, R; Sawant, S.S.; Venkat, K.; Anil, A.C.

boats, barges, and the inputs of TBT from the Goa shipyard and dry dock facility situated in the harbour are the probable sources of the DBT and TBT in the samples of the west coast of India. Higher levels of TBT were observed in biofilm relative...

Intermodal connectivity in Europe, an empirical exploration

NARCIS (Netherlands)

de Langen, P.W.; Lases Figueroa, D.M.; van Donselaar, K.H.; Bozuwa, J.

2017-01-01

In this paper we analyse the intermodal connectivity in Europe. The empirical analysis is to our knowledge the first empirical analysis of intermodal connections, and is based on a comprehensive database of intermodal connections in Europe. The paper focuses on rail and barge services, as they are

Effect of an oil spill from MV Sea Transporter on intertidal meiofauna at Goa, India

Digital Repository Service at National Institute of Oceanography (India)

Ansari, Z.A.; Ingole, B.S.

–163. Sanders, H.L., Grassle, J.F., Hampson, G.R., Morse, L.S., Garner- Price, S., Jones, C.C., 1980. Anatomyof an oil spill: long-term effects from the grounding of the barge Florida off west Falmouth, Massachusetts. Journal of Marine Research 38, 265...

78 FR 61937 - Safety Zone; Port of Galveston, Pelican Island Bridge Repair

Science.gov (United States)

2013-10-07

... Zone; Port of Galveston, Pelican Island Bridge Repair AGENCY: Coast Guard, DHS. ACTION: Temporary final... safety during the Pelican Island Bridge Repair Project. This action is necessary to protect public... barge will be placed under the Pelican Island Bridge; therefore immediate action is needed to protect...

49 CFR 176.170 - Transport of Class 1 (explosive) materials in freight containers.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Transport of Class 1 (explosive) materials in... REGULATIONS CARRIAGE BY VESSEL Detailed Requirements for Class 1 (Explosive) Materials Cargo Transport Units and Shipborne Barges § 176.170 Transport of Class 1 (explosive) materials in freight containers. (a...

78 FR 43165 - Takes of Marine Mammals Incidental to Specified Activities; Taking Marine Mammals Incidental to a...

Science.gov (United States)

2013-07-19

...: California sea lion (Zalophus californianus californianus), harbor seal (Phoca vitulina richardii), harbor... occur year-round in the Hood Canal, with the exception of the California sea lion, which is only present...-February 15 in order to protect spawning fish populations; however, the entire barge mooring project is...

77 FR 38236 - Special Local Regulation, Underwater Music Festival, Carr Inlet, Cutts Island, WA

Science.gov (United States)

2012-06-27

...-AA08 Special Local Regulation, Underwater Music Festival, Carr Inlet, Cutts Island, WA AGENCY: Coast... ensure the safety of the maritime public during the Underwater Music Festival and would do so by... Music Festival is an event which includes musical performances from a barge. Spectators approach the...

40 CFR 442.40 - Applicability.

Science.gov (United States)

2010-07-01

... TRANSPORTATION EQUIPMENT CLEANING POINT SOURCE CATEGORY Tanks Transporting Food Grade Cargos § 442.40 Applicability. This subpart applies to discharges resulting from the cleaning of tank trucks, intermodal tank containers, rail tank cars, tank barges and ocean/sea tankers which have been used to transport food grade...

WET-tests on UV-treated ballast water

NARCIS (Netherlands)

Kaag, N.H.B.M.

2015-01-01

Damen Shipyards has developed a barge-based ballast water management system (BWMS) that enables direct treatment of ballast water during discharge in a receiving harbour. The treatment is based upon filtration and a once-through UV-treatment. As part of the Type Approval process, the Dutch

46 CFR 151.50-6 - Motor fuel antiknock compounds.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Motor fuel antiknock compounds. 151.50-6 Section 151.50... BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-6 Motor fuel antiknock compounds. When transporting motor fuel antiknock compounds containing tetraethyl lead and...

Using machine learning for unsupervised maritime waypoint discovery from streaming AIS data

NARCIS (Netherlands)

Dobrkovic, Andrej; Iacob, Maria Eugenia; van Hillegersberg, Jos

2015-01-01

Estimating the future position of a deep sea vessel more than 24 hours in advance is a major challenge for Dutch logistics service providers (LSPs). Their unscheduled arrival in ports directly impacts scheduling and waiting times of barges, propagating throughout the entire supply chain network. To

75 FR 2845 - Interstate Movement of Garbage from Hawaii; Availability of an Environmental Assessment

Science.gov (United States)

2010-01-19

... environmental assessment (REA) titled ``Regional Movement of Plastic-baled Municipal Solid Waste from Hawaii to... environmental impacts associated with, and alternatives to, the movement of palletized or containerized baled municipal solid waste to three existing ports on the Columbia River via barge and the transfer and...

75 FR 53574 - Safety Zone; Fireworks Displays, Potomac River, National Harbor, MD

Science.gov (United States)

2010-09-01

...-AA00 Safety Zone; Fireworks Displays, Potomac River, National Harbor, MD AGENCY: Coast Guard, DHS... safety of life on navigable waters during five fireworks displays launched from a discharge barge located... necessary to protect persons and vessels against the hazards associated with a fireworks display on...

Load up technique to lift equipment from AHTS deck; Mecanismo de elevacao de equipamento de alta carga de 'deck' em embarcacao do tipo AHTS - 'load-up'

Energy Technology Data Exchange (ETDEWEB)

Santos, Melquisedec F.; Neves, Cassiano R. [SUBSIN - Subsea Integrity Engenharia e Projetos Ltda., Rio de Janeiro, RJ (Brazil)

2008-07-01

This paper presents an alternative way, using an auxiliary submersible structure, to install manifolds or subsea equipment transported to the location by an AHTS or an auxiliary barge. The objective of the structure is to positioning the manifold at the sea water level and make the deployment feasible without the use of large barges with high load capacity or specific vessel equipped with high load A-frame. The structure is towed and positioned by an AHTS or auxiliary vessel and does not have any energy source, propulsion, embarked crew or storage tank for combustible. All these things are at the towed vessel. The manifold uplift is performed by a hydraulic crane positioned at the top of the structure, or by buoyancy pontoons. The manifold also could be suspended by the supply crane. The submersible structure is designed using the modular concept, to facilitate the assembly and transportation. Pipes, connections and all other structure accessories are classified accordingly with the mechanic loads on the structure. (author)

Source water quality shaping different fouling scenarios in a full-scale desalination plant at the Red Sea

KAUST Repository

Khan, Muhammad

2013-02-01

The complexity of Reverse Osmosis (RO) membrane fouling phenomenon has been widely studied and several factors influencing it have been reported by many researchers. This original study involves the investigation of two different fouling profiles produced at a seawater RO desalination plant installed on a floating mobile barge. The plant was moved along the coastline of the Red Sea in Saudi Arabia. The two locations where the barge was anchored showed different water quality. At the second location, two modules were harvested. One of the modules was pre-fouled by inorganics during plant operation at the previous site while the other was installed at the second site. Fouled membranes were subjected to a wide range of chemical and microbiological characterization procedures. Drastically different fouling patterns were observed in the two membranes which indicates the influence of source water quality on membrane surface modification and on fouling of RO membranes. © 2012 Elsevier Ltd.

Russian Containers for Transportation of Solid Radioactive Waste

International Nuclear Information System (INIS)

Petrushenko, V. G.; Baal, E. P.; Tsvetkov, D. Y.; Korb, V. R.; Nikitin, V. S.; Mikheev, A. A.; Griffith, A.; Schwab, P.; Nazarian, A.

2002-01-01

The Russian Shipyard ''Zvyozdochka'' has designed a new container for transportation and storage of solid radioactive wastes. The PST1A-6 container is cylindrical shaped and it can hold seven standard 200-liter (55-gallon) drums. The steel wall thickness is 6 mm, which is much greater than standard U.S. containers. These containers are fully certified to the Russian GOST requirements, which are basically identical to U.S. and IAEA standards for Type A containers. They can be transported by truck, rail, barge, ship, or aircraft and they can be stacked in 6 layers in storage facilities. The first user of the PST1A-6 containers is the Northern Fleet of the Russian Navy, under a program sponsored jointly by the U.S. DoD and DOE. This paper will describe the container design and show how the first 400 containers were fabricated and certified

Preparation of FexCe1-xOy solid solution and its application in Pd-only three-way catalysts

Institute of Scientific and Technical Information of China (English)

Jianqiang Wang; Meiqing Shen; Jun Wang; Mingshan Cui; Jidong Gao; Jie Ma; Shuangxi Liu

2012-01-01

FeOx-CeO2 mixed oxides with increasing Fe/(Ce+Fe) atomic ratio (1-20 mol％) were prepared by sol-gel method and characterized by X-ray powder diffraction (XRD),Brunauer-Emmett-Teller (BET) and Hydrogen temperature-programmed reduction (H2-TPR) techniques.The dynamic oxygen storage capacity (DOSC) was investigated by mass spectrometry with CO/O2 transient pulses.The powder XRD data following Rietveld refinement revealed that the solubility limit of iron oxides in the CeO2 was 5 mol％ based on Fe/(Ce+Fe).The lattice parameters experienced a decrease followed by an increase due to the influence of the maximum solubility limit of iron oxides in the CeO2.TPR analysis revealed that Fe introduction into ceria strongly modified the textual and structural properties,which influenced the oxygen handling properties.DOSC results revealed that Ce-based materials containing Fe oxides with multiple valences contribute to the majority of DOSC.The kinetic analysis indicated that the calculated apparent kinetic parameters obey the compensation effect.The three-way catalytic performance for Pd-only catalysts based on the Fe doping support exhibited the redundant iron species separated out of the CeO2 and interacted with the ceria and Pd species on the surface,which seriously influenced the catalytic properties,especially after hydrothermal aging treatment.

Functional Programming

OpenAIRE

Chitil, Olaf

2009-01-01

Functional programming is a programming paradigm like object-oriented programming and logic programming. Functional programming comprises both a specific programming style and a class of programming languages that encourage and support this programming style. Functional programming enables the programmer to describe an algorithm on a high-level, in terms of the problem domain, without having to deal with machine-related details. A program is constructed from functions that only map inputs to ...

Lower Granite Dam Smolt Monitoring Program, 2004-2005 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Mensik, Fred; Rapp, Shawn; Ross Doug (Washington Department of Fish and Wildlife, Olympia, WA)

2005-11-01

The 2004 fish collection season at Lower Granite Dam (LGR) was characterized by above average water temperatures, below average flows and spill, low levels of debris. The number of smolts collected for all species groups (with the exception of clipped and unclipped sockeye/kokanee) exceeded all previous collection numbers. With the continued release of unclipped supplementation chinook, steelhead and sockeye above LGR, we can not accurately distinguish wild chinook, wild steelhead and wild sockeye/kokanee from hatchery reared unclipped chinook and sockeye/kokanee in the sample. Wild steelhead can be identified from hatchery steelhead by the eroded dorsal and pectoral fins exhibited on unclipped hatchery steelhead. The numbers in the wild columns beginning in 1998 include wild and unclipped hatchery origin smolts. This season a total of 11,787,539 juvenile salmonids was collected at LGR. Of these, 11,253,837 were transported to release sites below Bonneville Dam, 11,164,132 by barge and 89,705 by truck. An additional 501,395 fish were bypassed to the river due to over-capacity of the raceways and for research purposes. According to the PTAGIS database, 177,009 PIT-tagged fish were detected at LGR in 2004. Of these, 105,894 (59.8%) were bypassed through the PIT-tag diversion system, 69,130 (39.1%) were diverted to the raceways to be transported, 1,640 (0.9%) were diverted to the sample tank, sampled and then transported, 345 (0.2%) were undetected at any of the bypass, raceway or sample exit monitors.

Programming language for computations in the Interkosmos program

Science.gov (United States)

Schmidt, K.

1975-01-01

The programming system for Intercosmos data processing, based on the structural programming theory, which considers a program as an ordered set of standardized elementary parts, from which the user programs are automatically generated, is described. The programs are comprised of several modules, which are briefly summarized. The general structure of the programming system is presented in a block diagram. A programming control language developed to formulate the problem quickly and completely is presented along with basic symbols which are characteristic of the Intercosmos programming system.

33 CFR 110.230 - Puget Sound Area, Wash.

Science.gov (United States)

2010-07-01

..., the following hierarchy will be applied for assignment of a berth: tankers conducting lightering operations, then loaded tankers, and then all other vessels. (ii) Tugs and oil barges using the Cap Sante and... the Captain of the Port. (5) Within the Anacortes General Anchorages, lightering operations shall only...

33 CFR 155.2230 - Response plan development and evaluation criteria.

Science.gov (United States)

2010-07-01

... HOMELAND SECURITY (CONTINUED) POLLUTION OIL OR HAZARDOUS MATERIAL POLLUTION PREVENTION REGULATIONS FOR... and canals, inland, nearshore, and offshore areas 24 hrs N/A N/A Open ocean (plus travel time from... hours. (iii) Open ocean waters—36 hours. (3) For barges operating in rivers and canals as defined in...

Engineers of the Southwest Pacific 1941-1945. Volume 8. Critique

Science.gov (United States)

1950-01-01

beaches from Scarlet Bren and Bofors guns opened up from behind the Beach to Finschhafen were, for the most part, beach. One enemy barge foundered , but...Zamboanga, Mindanao Island, 11 May Wewak, New Guinea, captured landing (59) 13 May Balete Pass, Luzon, secured 16 Mar Basilan Island, Zulu

29 CFR 1918.2 - Definitions.

Science.gov (United States)

2010-07-01

... danger zones are nip and shear points, shear lines, drive mechanisms, and areas underneath counterweights... the employer to do a specific task in that area. Dockboards (car and bridge plates) mean devices for.... River towboat means a shallow draft, low freeboard, self-propelled vessel designed to tow river barges...

76 FR 14457 - Buy America Waiver Notification

Science.gov (United States)

2011-03-16

... which is currently non-functional, with new electric, barge-based cranes that will enable the Port to... cranes cannot be adapted to meet the mobility, lift, precision, and efficiency requirements necessary for... incorporated into the project must be produced in the United States. The specific statutory requirement reads...

29 CFR 1926.914 - Definitions applicable to this subpart.

Science.gov (United States)

2010-07-01

..., including but not limited to trucks, trailers, rail cars, barges, and vessels. (i) Detonating cord—A... caps, electric blasting caps, delay electric blasting caps, and nonelectric delay blasting caps. (k) Electric blasting cap—A blasting cap designed for and capable of detonation by means of an electric current...

40 CFR 63.8698 - What definitions apply to this subpart?

Science.gov (United States)

2010-07-01

... facility used to transfer oxidized asphalt from a storage tank into a tank truck, rail car, or barge... means an enclosed combustion device that primarily transfers heat liberated by burning fuel directly to process streams or to heat transfer liquids other than water. Research and development equipment means any...

46 CFR 151.03-19 - Environment.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Environment. 151.03-19 Section 151.03-19 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-19 Environment. This term refers to the atmosphere...

29 CFR 1926.605 - Marine operations and equipment.

Science.gov (United States)

2010-07-01

... chapter. The term “longshoring operations” means the loading, unloading, moving, or handling of... surfaces of barges. (1) Employees shall not be permitted to walk along the sides of covered lighters or... a safe passage. (4) Employees shall not be permitted to walk over deckloads from rail to coaming...

46 CFR 151.03-21 - Filling density.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Filling density. 151.03-21 Section 151.03-21 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-21 Filling density. The ratio, expressed as...

49 CFR 176.69 - General stowage requirements for hazardous materials.

Science.gov (United States)

2010-10-01

... equipped with a fixed fire extinguishing and fire detection system, the freight containers or barges need... by paragraph (a) of this section if fire fighting equipment capable of reaching and piercing the..., their removal from a potentially dangerous situation, and the removal of packages in case of fire. (b...

The effect of electron and hole doping on the thermoelectric properties of shandite-type Co3Sn2S2

OpenAIRE

Mangelis, Panagiotis; Vaqueiro, Paz; Jumas, Jean-Claude; da Silva, Ivan; Smith, Ronald I; Powell, Anthony V

2017-01-01

Electron and hole doping in Co3Sn2S2, through chemical substitution of cobalt by the neighbouring elements, nickel and iron, affects both the structure and thermoelectric properties. Electron doping to form Co3-xNixSn2S2 (0 ≤ x ≤ 3) results in an expansion of the kagome layer and materials become increasingly metallic as cobalt is substituted. Conversely, hole doping in Co3-xFexSn2S2 (0 ≤ x ≤ 0.6) leads to a transition from metallic to n-type semiconducting behaviour at x = 0.5. Iron substitu...

High Temperature Corrosion under Laboratory Conditions Simulating Biomass-Firing: A Comprehensive Characterization of Corrosion Products

DEFF Research Database (Denmark)

Okoro, Sunday Chukwudi; Montgomery, Melanie; Jappe Frandsen, Flemming

2014-01-01

characterization of the corrosion products. The corrosion products consisted of three layers: i) the outermost layer consisting of a mixed layer of K2SO4 and FexOy on a partly molten layer of the initial deposit, ii) the middle layer consists of spinel (FeCr2O4) and Fe2O3, and iii) the innermost layer is a sponge......-like Ni3S2 containing layer. At the corrosion front, Cl-rich protrusions were observed. Results indicate that selective corrosion of Fe and Cr by Cl, active oxidation and sulphidation attack of Ni are possible corrosion mechanisms....

A floating desalination/co-generation system using the KLT-40 reactor and Canadian RO desalination technology

International Nuclear Information System (INIS)

Humphries, J.R.; Davies, K.

2000-01-01

As the global consumption of water increases with growing populations and rising levels of industrialization, major new sources of potable water production must be developed. To address this issue efficiently and economically, a new approach has been developed in Canada for the integration of reverse osmosis (RO) desalination systems with nuclear reactors as an energy source. The resulting nuclear desalination/cogeneration plant makes use of waste heat from the electrical generation process to preheat the RO feedwater, advanced feedwater pre-treatment and sophisticated system design integration and optimization techniques. These innovations have led to improved water production efficiency, lower water production costs and reduced environmental impact. The Russian Federation is developing the KLT-40 reactor for application as a Floating Power Unit (FPU). The reactor is ideally suited for such purposes, having bad many years of successful operation as a marine propulsion reactor aboard floating nuclear powered icebreakers and other nuclear propelled vessels. Under the terms of a cooperation agreement with the Russian Federation Ministry of Atomic Energy, CANDESAL Enterprises Ltd has evaluated the FPU, containing two KLT-40 reactors, as a source of electrical energy and waste heat for RO desalination. A design concept for a floating nuclear desalination complex consisting of the FPU and a barge mounted RO desalination unit has been analyzed to establish preliminary performance characteristics for the complex. The FPU, operating as a barge mounted electrical generating station, provides electricity to the desalination barge. In addition, the condenser cooling water from the FPU is used as a source of preheated feedwater for the RO system on the desalination barge. The waste heat produced by the electrical generating process is sufficient to provide RO feedwater at a temperature of about 10 deg. C above ambient seawater temperature. Preliminary design studies have

75 FR 15611 - Safety Zone; United Portuguese SES Centennial Festa, San Diego Bay, San Diego, CA

Science.gov (United States)

2010-03-30

...-AA00 Safety Zone; United Portuguese SES Centennial Festa, San Diego Bay, San Diego, CA AGENCY: Coast... navigable waters of the San Diego Bay in support of the United Portuguese SES Centennial Festa. This... Centennial Festa, which will include a fireworks presentation originating from a tug and barge combination in...

78 FR 20910 - Combined Notice of Filings #1

Science.gov (United States)

2013-04-08

... Numbers: ER12-1378-000. Applicants: Cleco Power LLC. Description: Transmission Rate Case Refund Report to... p.m. ET 4/18/13. Docket Numbers: ER13-123-001. Applicants: ExxonMobil LaBarge Shute Creek Treating... Mohawk Power Corporation, New York Independent System Operator, Inc. Description: Refiling of SA 1951 to...

46 CFR 151.45-8 - Illness, alcohol, drugs.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Illness, alcohol, drugs. 151.45-8 Section 151.45-8 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-8 Illness, alcohol, drugs. A person who...

76 FR 31230 - Safety Zone; M.I.T.'s 150th Birthday Celebration Fireworks, Charles River, Boston, MA

Science.gov (United States)

2011-05-31

...-AA00 Safety Zone; M.I.T.'s 150th Birthday Celebration Fireworks, Charles River, Boston, MA AGENCY... regulated area on the Charles River around the fireworks launch barge during the fireworks display... portions of the Charles River during a fireworks display. This rule will not have a significant economic...

76 FR 78820 - Safety Zone; City of Beaufort's Tricentennial New Year's Eve Fireworks Display, Beaufort River...

Science.gov (United States)

2011-12-20

...-AA00 Safety Zone; City of Beaufort's Tricentennial New Year's Eve Fireworks Display, Beaufort River... establishing a temporary safety zone on the Beaufort River, in Beaufort, South Carolina, during the City of... Carolina. The fireworks will be launched from a barge, which will be located on the Beaufort River. The...

40 CFR 440.141 - Specialized definitions and provisions.

Science.gov (United States)

2010-07-01

... increase in volume from precipitation or infiltration, plus the maximum volume of water runoff resulting... plant, all mounted on a floating barge. (5) “Five (5) year, 6-hour precipitation event” means the maximum 6-hour precipitation event with a probable recurrence interval of once in 5 years as established...

46 CFR 56.50-1 - General (replaces 122).

Science.gov (United States)

2010-10-01

... Safety Center. All power actuated valves required in an emergency to operate the vessel's machinery, to... liquids, except that tank barges having plug cocks inside cargo tanks may have reach rods of extra-heavy... maintenance of machinery and appurtenances. The joints shall be located so that adequate space is provided for...

46 CFR 35.05-15 - Tank vessel security-TB/ALL.

Science.gov (United States)

2010-10-01

... scuppers, if any, unobstructed; meets any loadline or freeboard requirements; and neither leaks cargo into the water, voids, or cofferdams nor leaks water into the tanks, voids, or cofferdams; (ii) Ensuring... checks are made of every tank barge in the tow for leakage of cargo into the water, voids, or cofferdams...

40 CFR 61.341 - Definitions.

Science.gov (United States)

2010-07-01

..., settling, and aeration pits, ponds, and lagoons. Tank means a stationary waste management unit that is... handled. Examples of containers are drums, barrels, tank trucks, barges, dumpsters, tank cars, dump trucks.... Example of covers include a fixed roof installed on a tank, a lid installed on a container, and an air...

40 CFR 60.301 - Definitions.

Science.gov (United States)

2010-07-01

... capacity of more than 88,100 m3 (ca. 2.5 million U.S. bushels), except those located at animal food manufacturers, pet food manufacturers, cereal manufacturers, breweries, and livestock feedlots. (d) Permanent... grain is transferred from a truck, railcar, barge, or ship to a receiving hopper. (k) Grain loading...

77 FR 31631 - Towing Safety Advisory Committee; Vacancies

Science.gov (United States)

2012-05-29

... and oil supply vessel industry; [cir] One member representing holders of active licensed Masters or... the Barge and Towing industry; One representative from the offshore mineral and oil supply vessel...). Applicants can obtain this form by going to the Web site of the Office of Government Ethics ( www.oge.gov...

15 CFR 30.6 - Electronic Export Information data elements.

Science.gov (United States)

2010-01-01

... in paragraph (a)(8) of this section. Terms, such as airplane, train, rail, truck, vessel, barge, or..., including goods exported from U.S. FTZs, Puerto Rico, or the U.S. Virgin Islands; and those articles of... (license or exemption) from DDTC to export the article. (ii) DDTC Significant Military Equipment (SME...

75 FR 38412 - Safety Zone; San Diego POPS Fireworks, San Diego, CA

Science.gov (United States)

2010-07-02

...-AA00 Safety Zone; San Diego POPS Fireworks, San Diego, CA AGENCY: Coast Guard, DHS. ACTION: Temporary... waters of San Diego Bay in support of the San Diego POPS Fireworks. This safety zone is necessary to... San Diego POPS Fireworks, which will include fireworks presentations conducted from a barge in San...

78 FR 68002 - Safety Zone for Fireworks Display, Baltimore Harbor, Baltimore, MD

Science.gov (United States)

2013-11-13

... 1625-AA00 Safety Zone for Fireworks Display, Baltimore Harbor, Baltimore, MD AGENCY: Coast Guard, DHS... safety of life on navigable waters during a fireworks display launched from a barge located in Baltimore... rule involves a fireworks display associated with a New Year's Eve event that will take place in...

Maine Migrant Program: 1997-1998 Program Evaluation.

Science.gov (United States)

Bazinet, Suzanne C., Ed.

The Maine Department of Education contracts with local educational agencies to administer the Maine Migrant Education Program. The program's overall mission is to provide the support necessary for migrant children to achieve Maine's academic standards. In 1997-98, 73 local migrant programs served 9,838 students, and 63 summer programs served 1,769…

Program Leadership from a Nordic Perspective - Program Leaders' Power to Influence Their Program

DEFF Research Database (Denmark)

Högfeldt, Anna-Karin; Strömberg, Emma; Jerbrant, Anna

2013-01-01

research demonstrated that program leaders have quite different positions, strategies and methods when it comes to monitoring and developing their programs. In this paper, a deeper investigation is carried out of the (im-) possibilities to make real influence on the study courses that constitutes...... the respective Engineering study programs. Eight program leaders from the five N5T universities have been interviewed, and the analysis of these studies, has culminated in a model for the analysis of program leadership for Engineering education development....

Multi-Year Program Plan - Building Regulatory Programs

Energy Technology Data Exchange (ETDEWEB)

none,

2010-10-01

This document presents DOE’s multi-year plan for the three components of the Buildings Regulatory Program: Appliance and Equipment Efficiency Standards, ENERGY STAR, and the Building Energy Codes Program. This document summarizes the history of these programs, the mission and goals of the programs, pertinent statutory requirements, and DOE’s 5-year plan for moving forward.

Program summary for the Civilian Reactor Development Program

International Nuclear Information System (INIS)

1982-07-01

This Civilian Reactor Development Program document has the prime purpose of summarizing the technical programs supported by the FY 1983 budget request. This section provides a statement of the overall program objectives and a general program overview. Section II presents the technical programs in a format intended to show logical technical interrelationships, and does not necessarily follow the structure of the formal budget presentation. Section III presents the technical organization and management structure of the program

Geothermal Technologies Program Overview - Peer Review Program

Energy Technology Data Exchange (ETDEWEB)

Milliken, JoAnn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

2011-06-06

This Geothermal Technologies Program presentation was delivered on June 6, 2011 at a Program Peer Review meeting. It contains annual budget, Recovery Act, funding opportunities, upcoming program activities, and more.

A Program Transformation for Backwards Analysis of Logic Programs

DEFF Research Database (Denmark)

Gallagher, John Patrick

2003-01-01

The input to backwards analysis is a program together with properties that are required to hold at given program points. The purpose of the analysis is to derive initial goals or pre-conditions that guarantee that, when the program is executed, the given properties hold. The solution for logic...... programs presented here is based on a transformation of the input program, which makes explicit the dependencies of the given program points on the initial goals. The transformation is derived from the resultants semantics of logic programs. The transformed program is then analysed using a standard...

76 FR 50669 - Safety Zones; Eleventh Coast Guard District Annual Fireworks Events

Science.gov (United States)

2011-08-16

... a 1,000-foot radius upon commencement of the fireworks display. 2. LA County Dept of Beach and... navigable waters of the Sea Cliff State Beach Pier. 27. Rio Vista Bass Derby Fireworks Sponsor Rio Vista... feet off Rio Vista, CA waterfront. Regulated Area 100-foot radius around the fireworks launch barge...

Matter Unmoored: Trash, Archaeological Consciousness and American Culture and Fiction in the 1980s

NARCIS (Netherlands)

Jelfs, Tim

This article considers the cultural significance of the garbage panics of the 1980s, including the voyage of the infamous Mobro 4000 “garbage barge.” The article argues that the trash at the centre of these panics is important to our understanding of both the 1980s and the present because it

46 CFR 32.63-20 - Hull structure-B/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Hull structure-B/ALL. 32.63-20 Section 32.63-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Hull and Cargo Tank Requirements for Tank Barges Constructed or Converted On or After July 1, 1964...

Feasibility and Practical Limits for the Use of Lightweight Prestressed Concrete (LWPC) as a Shipbuilding Material.

Science.gov (United States)

1982-10-01

estressed Conclrete Barges, Nippon Kaiji Kyokai 1975. 15. Mast, R. F. , "Des ign Cr’iteria - ARCO Prest ressed Concr’ete Hull" paper presented to U.S. Coast...the monolithic character of all-welded steel ship’s hulls, where a brittle fracture could spread with catastruphic consequences, prestressed conicrete

76 FR 58108 - Safety Zone; Ryder Cup Captain's Duel Golf Shot, Chicago River, Chicago, IL

Science.gov (United States)

2011-09-20

...-AA00 Safety Zone; Ryder Cup Captain's Duel Golf Shot, Chicago River, Chicago, IL AGENCY: Coast Guard... the Chicago River during a golfing event that will involve hitting golf balls from land onto a... vessels from the hazards associated with golf balls being hit from land onto a stationary barge in the...

33 CFR 334.870 - San Diego Harbor, Calif.; restricted area.

Science.gov (United States)

2010-07-01

..., Calif.; restricted area. (a) Restricted area at Bravo Pier, Naval Air Station—(1) The area. The water of... delay or loitering. On occasion, access to the bait barges may be delayed for intermittent periods not... Supply Center Pier—(1) The area. The waters of San Diego Bay extending approximately 100 feet out from...

77 FR 37707 - Draft Environmental Impact Statement on Brooks River Visitor Access for Katmai National Park and...

Science.gov (United States)

2012-06-22

... four action alternatives that include bridge and boardwalk systems to replace the existing Brooks River floating bridge and sites to relocate the existing Naknek Lake barge landing area at the mouth of the... maintain seasonal use of the floating bridge, which is 8 feet wide and about 320 feet long. The bridge...

78 FR 22778 - Safety Zone; Corp. Event Finale UHC, St. Thomas Harbor; St. Thomas, U.S.V.I.

Science.gov (United States)

2013-04-17

... waters of St. Thomas Harbor in St. Thomas, U.S. Virgin Islands during the Corp. Event Finale UHC, a.... and 5 p.m., Monday through Friday, except Federal holidays. FOR FURTHER INFORMATION CONTACT: If you..., St. Thomas, U. S. Virgin Islands. The fireworks will be launched from a barge stationed near the St...

Self-closing sheet for encapsulating and dumping a bulk of material

DEFF Research Database (Denmark)

2017-01-01

The invention relates to a sheet (1) to be placed in relation to a split barge (100) for encapsulating a bulk of material (101) to be dumped when the bulk of material is released, the sheet comprising a material containing portion (4) and at least one material free portion (3) extending from...

Object-Oriented Programming in the Beta Programming Language

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann; Møller-Pedersen, Birger; Nygaard, Kristen

This is a book on object-oriented programming and the BETA programming language. Object-oriented programming originated with the Simula languages developed at the Norwegian Computing Center, Oslo, in the 1960s. The first Simula language, Simula I, was intended for writing simulation programs....... Simula I was later used as a basis for defining a general purpose programming language, Simula 67. In addition to being a programming language, Simula1 was also designed as a language for describing and communicating about systems in general. Simula has been used by a relatively small community for many...... years, although it has had a major impact on research in computer science. The real breakthrough for object-oriented programming came with the development of Smalltalk. Since then, a large number of programming languages based on Simula concepts have appeared. C++ is the language that has had...

Repository-Based Software Engineering Program: Working Program Management Plan

Science.gov (United States)

1993-01-01

Repository-Based Software Engineering Program (RBSE) is a National Aeronautics and Space Administration (NASA) sponsored program dedicated to introducing and supporting common, effective approaches to software engineering practices. The process of conceiving, designing, building, and maintaining software systems by using existing software assets that are stored in a specialized operational reuse library or repository, accessible to system designers, is the foundation of the program. In addition to operating a software repository, RBSE promotes (1) software engineering technology transfer, (2) academic and instructional support of reuse programs, (3) the use of common software engineering standards and practices, (4) software reuse technology research, and (5) interoperability between reuse libraries. This Program Management Plan (PMP) is intended to communicate program goals and objectives, describe major work areas, and define a management report and control process. This process will assist the Program Manager, University of Houston at Clear Lake (UHCL) in tracking work progress and describing major program activities to NASA management. The goal of this PMP is to make managing the RBSE program a relatively easy process that improves the work of all team members. The PMP describes work areas addressed and work efforts being accomplished by the program; however, it is not intended as a complete description of the program. Its focus is on providing management tools and management processes for monitoring, evaluating, and administering the program; and it includes schedules for charting milestones and deliveries of program products. The PMP was developed by soliciting and obtaining guidance from appropriate program participants, analyzing program management guidance, and reviewing related program management documents.

Program auto

International Nuclear Information System (INIS)

Rawool-Sullivan, M.W.; Plagnol, E.

1990-01-01

The program AUTO was developed to be used in the analysis of dE vs E type spectra. This program is written in FORTRAN and calculates dE vs E lines in MeV. The provision is also made in the program to convert these lines from MeV to ADC channel numbers to facilitate the comparison with the raw data from the experiments. Currently the output of this program can be plotted with the display program, called VISU, but it can also be used independent of the program VISU, with little or no modification in the actual fortran code. The program AUTO has many useful applications. In this article the program AUTO is described along with its applications

Shippingport Station Decommissioning Project (SSDP). A progress report

International Nuclear Information System (INIS)

Mullee, G.R.; Usher, J.M.

1986-01-01

The Shippingport Atomic Power Station was shutdown in October, 1982 by the Plant Operator, Duquesne Light Company, for decommissioning by the US Department of Energy. The planning for decommissioning was completed in September, 1983. In September, 1984 operational responsibility for the station was transferred to the DOE's Decommissioning Operations Contractor - the General Electric Company (assisted by an integrated subcontractor, MK Ferguson Company). Significant accomplishments to date include the completion of all prerequisites for decommissioning, the removal of asbestos from plant systems, loading of irradiated reactor components into the reactor vessel for shipment, the commencement of electrical deactivations and the commencement of piping/component removal. Decontamination and waste processing are progressing in support of the project schedule. The reactor vessel will be shipped as one piece on a barge for burial at Hanford, Washington. The final release of the site is scheduled for April, 1990. A technology transfer program is being utilized to disseminate information about the project

Noise Pollution Aspects of Barge, Railroad, and Truck Transportation,

Science.gov (United States)

1975-04-01

dBA Trolley 88 dBA 82 dBA 78 dBA 72 dBA Truck 87 dBA 81 dBA 76 dBA 74 dBA Bus 81 dBA 76 dBA 72 dBA 68 dBA Automobile 78 dBA 74 dBA 65 dBA 63 dBA I NO...Environmlent~al Prot~ect~ion Agency, Background Document/linvironment~al Explanat~ion f~or Proposed Int~erstate Rail Carriler Noise Emission Regulat~ions (1974...2). By way of comparison only 0.1 percent automobiles produced this noise level at 70 miles per hour (Figure E-1). Bus and motorcycle noise levels (at

A Playful Programming Products Vs. Programming Concepts Matrix

DEFF Research Database (Denmark)

Allsopp, Benjamin Brink

2017-01-01

to computer program: playful programming. This research also describes a project to bring together different stakeholders (developers, educators, parents and researchers) with a common vocabulary for describing, developing, teaching with and comparing these playful programming products and develops a model......A number of Danish primary schools are involved in pilot studies where 1st to 9th grade students work with Scratch and Lego MindStorms in STEM subjects. These games may become part of the curriculum at these schools. Recent research identifies a category of games and toys that support learning...... to provide educators and researchers involved in pilot studies with an overview of which programming concepts various playful programming products exercise (a playful programming products vs. programming concepts matrix). We also add additional concept specializations and expand on the descriptions...

Programming by Numbers -- A Programming Method for Complete Novices

NARCIS (Netherlands)

Glaser, Hugh; Hartel, Pieter H.

2000-01-01

Students often have difficulty with the minutiae of program construction. We introduce the idea of `Programming by Numbers', which breaks some of the programming process down into smaller steps, giving such students a way into the process of Programming in the Small. Programming by Numbers does not

Clean Coal Technology Demonstration Program: Program Update 1998

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

1999-03-01

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

Numerical study of a novel procedure for installing the tower and Rotor Nacelle Assembly of offshore wind turbines based on the inverted pendulum principle

Science.gov (United States)

Guachamin Acero, Wilson; Gao, Zhen; Moan, Torgeir

2017-09-01

Current installation costs of offshore wind turbines (OWTs) are high and profit margins in the offshore wind energy sector are low, it is thus necessary to develop installation methods that are more efficient and practical. This paper presents a numerical study (based on a global response analysis of marine operations) of a novel procedure for installing the tower and Rotor Nacelle Assemblies (RNAs) on bottom-fixed foundations of OWTs. The installation procedure is based on the inverted pendulum principle. A cargo barge is used to transport the OWT assembly in a horizontal position to the site, and a medium-size Heavy Lift Vessel (HLV) is then employed to lift and up-end the OWT assembly using a special upending frame. The main advantage of this novel procedure is that the need for a huge HLV (in terms of lifting height and capacity) is eliminated. This novel method requires that the cargo barge is in the leeward side of the HLV (which can be positioned with the best heading) during the entire installation. This is to benefit from shielding effects of the HLV on the motions of the cargo barge, so the foundations need to be installed with a specific heading based on wave direction statistics of the site and a typical installation season. Following a systematic approach based on numerical simulations of actual operations, potential critical installation activities, corresponding critical events, and limiting (response) parameters are identified. In addition, operational limits for some of the limiting parameters are established in terms of allowable limits of sea states. Following a preliminary assessment of these operational limits, the duration of the entire operation, the equipment used, and weather- and water depth-sensitivity, this novel procedure is demonstrated to be viable.

76 FR 30584 - Safety Zones; Eleventh Coast Guard District Annual Fireworks Events

Science.gov (United States)

2011-05-26

.... 2. LA County Dept of Beach and Harbors 4th of July Fireworks Sponsor Los Angeles, CA County Dept of... waters of the Sea Cliff State Beach Pier. 27. Rio Vista Bass Derby Fireworks Sponsor Rio Vista Chamber of... Vista, CA waterfront. Regulated Area 100-foot radius around the fireworks launch barge during the...

Effect of wind turbine on TLP flating platform response

Digital Repository Service at National Institute of Oceanography (India)

Chodnekar, Y.P.; Mandal, S.; Rao, K.B.

: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308 _______________________________________________________________________________________ Volume: 04 Issue: 05 | May-2015, Available @ http://www...: 05 | May-2015, Available @ http://www.ijret.org 212 barge. Besides this an interesting thing that is observed is that surge and pitch increases until wind is 12m...

46 CFR 148.04-23 - Unslaked lime in bulk.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Unslaked lime in bulk. 148.04-23 Section 148.04-23... HAZARDOUS MATERIALS IN BULK Special Additional Requirements for Certain Material § 148.04-23 Unslaked lime in bulk. (a) Unslaked lime in bulk must be transported in unmanned, all steel, double-hulled barges...

Implementation of the project for the construction and operation of a nuclear heat and power plant on the basis of a floating power unit with KLT-40C reactors

Energy Technology Data Exchange (ETDEWEB)

Polushkin, A K; Kuzin, E A [JSC Malaya Energetika, Moscow (Russian Federation); Vorobiov, V M [JSC Atomenergo, St. Petersburg (Russian Federation); Klykov, D M [JSC Iceberg, St. Petersburg (Russian Federation); Panov, J K [OKBM, Nizhny Novgorod (Russian Federation)

2000-09-01

This paper presents the results of research and development on floating nuclear power plant (FNPP) for electricity and heat production for remote locations and small island or coastal communities. Evaluations of construction period, social and economic factors as well as safety and operational issues of the non-self-propelled barge-mounted NPP is given. (author)

Implementation of the project for the construction and operation of a nuclear heat and power plant on the basis of a floating power unit with KLT-40C reactors

International Nuclear Information System (INIS)

Polushkin, A.K.; Kuzin, E.A.; Vorobiov, V.M.; Klykov, D.M.; Panov, J.K.

2000-01-01

This paper presents the results of research and development on floating nuclear power plant (FNPP) for electricity and heat production for remote locations and small island or coastal communities. Evaluations of construction period, social and economic factors as well as safety and operational issues of the non-self-propelled barge-mounted NPP is given. (author)

78 FR 8582 - Final Environmental Impact Statement for Brooks River Visitor Access for Katmai National Park and...

Science.gov (United States)

2013-02-06

... River floating bridge and sites to relocate the existing Naknek Lake barge landing area at the mouth of... alternative would maintain seasonal use of the floating bridge, which is 8 feet wide and about 320 feet long... piles and would follow the alignment of the floating bridge. The bridge and boardwalk system would have...

78 FR 43753 - Inspection and Weighing of Grain in Combined and Single Lots

Science.gov (United States)

2013-07-22

... USGSA regulations for shiplots, unit trains, and lash barges. This final rule allows for breaks in... the loading of the lot must be reasonably continuous, with no consecutive break in loading to exceed... superseded; (iii) The location of the grain, if at rest, or the name(s) of the elevator(s) from which or into...

77 FR 68718 - Safety Zone for Fireworks Display, Upper Potomac River, Alexandria Channel; Washington, DC

Science.gov (United States)

2012-11-16

... the annual fireworks display is being moved from land to a discharge barge located on the Upper... comments, as well as documents mentioned in this preamble as being available in the docket, go to http...). Upon being hailed by a U.S. Coast Guard vessel, or other Federal, State, or local agency vessel, by...

Optimising and Recognising 2-Stage Delivery Chains with Time Windows

NARCIS (Netherlands)

Frank Phillipson, F.; Ortega del Vecchyo, M.; Ginkel, B. van; Huizing, S.; Sangers, A.

2017-01-01

In logistic delivery chains time windows are common. An arrival has to be in a certain time interval, at the expense of waiting time or penalties if the time limits are exceeded. This paper looks at the optimal placement of those time intervals in a specific case of a barge visiting two ports in

Ternary mixed metal Fe-doped NiCo2O4 nanowires as efficient electrocatalysts for oxygen evolution reaction

Science.gov (United States)

Yan, Kai-Li; Shang, Xiao; Li, Zhen; Dong, Bin; Li, Xiao; Gao, Wen-Kun; Chi, Jing-Qi; Chai, Yong-Ming; Liu, Chen-Guang

2017-09-01

Designing mixed metal oxides with unique nanostructures as efficient electrocatalysts for water electrolysis has been an attractive approach for the storage of renewable energies. The ternary mixed metal spinel oxides FexNi1-xCo2O4 (x = 0, 0.1, 0.25, 0.5, 0.75, 0.9, 1) have been synthesized by a facile hydrothermal approach and calcination treatment using nickel foam as substrate. Fe/Ni ratios have been proved to affect the nanostructures of FexNi1-xCo2O, which imply different intrinsic activity for oxygen evolution reaction (OER). SEM images show that Fe0.5Ni0.5Co2O4 has the uniform nanowires morphology with about 30 nm of the diameter and 200-300 nm of the length. The OER measurements show that Fe0.5Ni0.5Co2O4 exhibits the better electrocatalytic performances with lower overpotential of 350 mV at J = 10 mA cm-2. In addition, the smaller Tafel slope of 27 mV dec-1 than other samples with different Fe/Ni ratios for Fe0.5Ni0.5Co2O4 is obtained. The improved OER activity of Fe0.5Ni0.5Co2O4 may be attributed to the synergistic effects from ternary mixed metals especially Fe-doping and the uniform nanowires supported on NF. Therefore, synthesizing Fe-doped multi-metal oxides with novel nanostructures may be a promising strategy for excellent OER electrocatalysts and it also provides a facile way for the fabrication of high-activity ternary mixed metal oxides electrocatalysts.

Activity of Aniline Methylation over Fe-Cu-Cr Ternary Spinel Systems

Directory of Open Access Journals (Sweden)

Reni George

2014-03-01

Full Text Available A series of spinels having thegeneral formula CuCr2-xFexO4 with x=0.25,0.75, 1.25, 1.75 were prepared by co-precipitation method. The catalysts werecharacterized by various physico-chemical methods like XRD, BET, UV-DRS, SEM,EDX, TPD etc. The reaction of aniline with methanol was studied in a fixed-bedreactor system as a potential source for the production of various methylanilines. It was observed that systems possessing low ‘x’ values are highlyselective and active for N-monoalkylation of aniline leading toN-methylaniline. Reaction parameters were properly varied to optimize thereaction conditions for obtaining N-methylaniline selectively and in betteryield. Among the systems CuCr1.75Fe0.25O4 isremarkable due to its very high activity and excellent stability. Under theoptimized conditions N-methylaniline selectivity exceeded 91%. CuCr1.25Fe0.75O4gives better conversion than CuCr1.75Fe0.25O4in CuCr2-xFexO4 series. The Lewis acid sitesof the catalysts are mainly responsible for the good catalytic performance. © 2014 BCREC UNDIP. All rights reservedSubmitted: 18th July 2013; Revised: 5th November 2013; Accepted: 1st December 2013[How to Cite: George, R., George, K., Sugunan, S. (2014. Activity of Aniline Methylation over Fe-Cu-Cr Ternary Spinel Systems. Bulletin of Chemical Reaction Engineering & Catalysis, 9 (1: 39-44. (doi:10.9767/bcrec.9.1.5169.39-44][Permalink/DOI: http://dx.doi.org/10.9767/bcrec.9.1.5169.39-44] 

Identification and characterization of the multidrug resistance gene cfr in a Panton-Valentine leukocidin-positive sequence type 8 methicillin-resistant Staphylococcus aureus IVa (USA300) isolate.

LENUS (Irish Health Repository)

Shore, Anna C

2010-12-01

The staphylococcal cfr gene mediates resistance to phenicols, lincosamides, oxazolidinones, pleuromutilins, and streptogramin A, a phenotype that has been termed PhLOPS(A). The cfr gene has mainly been associated with coagulase-negative staphylococcal isolates from animals, and only a few cfr-positive methicillin-resistant Staphylococcus aureus (MRSA) isolates have been described so far. This study reports the first description of a cfr-positive MRSA isolate (M05\\/0060) belonging to the pandemic Panton-Valentine leukocidin (PVL)-positive sequence type 8 MRSA IVa\\/USA300 (ST8-MRSA-IVa\\/USA300) clone. The cfr gene was detected in M05\\/0060 using a DNA microarray which was used to screen PVL-positive MRSA isolates for the presence of virulence genes, typing markers, and antimicrobial resistance genes. Antimicrobial susceptibility testing revealed that M05\\/0060 exhibited the cfr-associated resistance phenotype. Molecular analysis identified the presence of cfr and a second phenicol resistance gene, fexA, on a novel 45-kb conjugative plasmid, which was designated pSCFS7. Within pSCFS7, a DNA segment consisting of cfr, a truncated copy of insertion sequence IS21-558, and a region with homology to the DNA invertase gene bin3 of transposon Tn552 from Bacillus mycoides was integrated into the transposase gene tnpB of the fexA-carrying transposon Tn558. The emergence of a multidrug-resistant cfr-positive variant of ST8-MRSA-IVa\\/USA300 is alarming and requires ongoing surveillance. Moreover, the identification of a novel conjugative plasmid carrying the cfr gene indicates the ability of cfr to spread to other MRSA strains.

Program specialization

CERN Document Server

Marlet, Renaud

2013-01-01

This book presents the principles and techniques of program specialization - a general method to make programs faster (and possibly smaller) when some inputs can be known in advance. As an illustration, it describes the architecture of Tempo, an offline program specializer for C that can also specialize code at runtime, and provides figures for concrete applications in various domains. Technical details address issues related to program analysis precision, value reification, incomplete program specialization, strategies to exploit specialized program, incremental specialization, and data speci

Application of tidal energy for purification in fresh water lake

Directory of Open Access Journals (Sweden)

Rho-Taek Jung

2015-01-01

Full Text Available In order to preserve the quality of fresh water in the artificial lake after the reclamation of an intertidal flat at the mouth of a river, we suggest two novel methods of water purification by using tidal potential energy and an enclosed permeable embankment called an utsuro (Akai et al., 1990 in the reclaimed region. One method uses an inflatable bag on the seabed within an utsuro, while the other uses a moored floating barge out of a dyke. Each case employs a subsea pipe to allow flow between the inside and outside of the utsuro. The change in water level in the utsuro, which is pushed through the pipe by the potential energy outside, caused circulation in the artificial lake. In this paper, we analyzed the inflatable bag and floating barge motion as well as the pipe flow characteristics and drafts as given by a harmonic sea level, and compared the theoretical value with an experimental value with a simple small model basin. The numerical calculation based on theory showed good agreement with experimental values.

PWR.2 - the unique transportation

International Nuclear Information System (INIS)

Howell, G.E.; Wills, L.I.

1987-01-01

Design studies of the prototype machinery and installation of same to be used for test and evaluation of a new design of nuclear power plant for submarines, showed that there were advantages if large units could be fitted out entirely at the manufacturer's base in Barrow-in-Furness. However, they had then to be shipped to the customer at the Vulcan Naval Reactor Test Establishment in Caithness, Scotland. The transportation of the loads involved is described. The main loads were the primary unit which weighed 1300 tonnes and the secondary unit which was transported as five separate assemblies, the largest two of which weighed 151 and 43 tonnes. Five basic transportation methods were used: skidding on PTFE pads, sea passage with barge on submersible barge, rolling on airbags, skating on water skates and lifting and rolling on multi-wheeled trailers. By careful planning the primary unit was moved in 16 days and the secondary unit in 19 days. The route and methods used are described and illustrated. (U.K.)

UNDERSTANDING THE RELATIONSHIPS OF PROGRAM SATISFACTION, PROGRAM LOYALTY AND STORE LOYALTY AMONG CARDHOLDERS OF LOYALTY PROGRAMS

Directory of Open Access Journals (Sweden)

Nor Asiah Omar

2011-01-01

Full Text Available Loyalty programs have increasingly attracted interest in both academic marketing research and practice. One major factor that has been increasingly discussed is loyalty. In this study we examine the influence of cardholders' satisfaction on loyalty (program loyalty and store loyalty in a retail context, namely, in department stores and superstores. Data were collected from 400 cardholders of a retail loyalty program in Klang Valley, Malaysia via the drop-off-and-collect technique. Structural modelling techniques were applied to analyze the data. The results indicated that program satisfaction is not related to store loyalty (share-of-wallet, share-of-visit and store preference. However, loyalty to the program (program loyalty plays a crucial intervening role in the relationship between program satisfaction and store loyalty. The study underscores the principal importance of program loyalty in the retail loyalty program.

Collectively loading programs in a multiple program multiple data environment

Science.gov (United States)

Aho, Michael E.; Attinella, John E.; Gooding, Thomas M.; Gooding, Thomas M.; Miller, Samuel J.

2016-11-08

Techniques are disclosed for loading programs efficiently in a parallel computing system. In one embodiment, nodes of the parallel computing system receive a load description file which indicates, for each program of a multiple program multiple data (MPMD) job, nodes which are to load the program. The nodes determine, using collective operations, a total number of programs to load and a number of programs to load in parallel. The nodes further generate a class route for each program to be loaded in parallel, where the class route generated for a particular program includes only those nodes on which the program needs to be loaded. For each class route, a node is selected using a collective operation to be a load leader which accesses a file system to load the program associated with a class route and broadcasts the program via the class route to other nodes which require the program.

Clean Coal Technology Demonstration Program: Program Update 2001

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

2002-07-30

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results. Also includes Power Plant Improvement Initiative Projects.

An Analysis of Programming Beginners' Source Programs

Science.gov (United States)

Matsuyama, Chieko; Nakashima, Toyoshiro; Ishii, Naohiro

The production of animations was made the subject of a university programming course in order to make students understand the process of program creation, and so that students could tackle programming with interest. In this paper, the formats and composition of the programs which students produced were investigated. As a result, it was found that there were a lot of problems related to such matters as how to use indent, how to apply comments and functions etc. for the format and the composition of the source codes.

Learners Programming Language a Helping System for Introductory Programming Courses

Directory of Open Access Journals (Sweden)

MUHAMMAD SHUMAIL NAVEED

2016-07-01

Full Text Available Programming is the core of computer science and due to this momentousness a special care is taken in designing the curriculum of programming courses. A substantial work has been conducted on the definition of programming courses, yet the introductory programming courses are still facing high attrition, low retention and lack of motivation. This paper introduced a tiny pre-programming language called LPL (Learners Programming Language as a ZPL (Zeroth Programming Language to illuminate novice students about elementary concepts of introductory programming before introducing the first imperative programming course. The overall objective and design philosophy of LPL is based on a hypothesis that the soft introduction of a simple and paradigm specific textual programming can increase the motivation level of novice students and reduce the congenital complexities and hardness of the first programming course and eventually improve the retention rate and may be fruitful in reducing the dropout/failure level. LPL also generates the equivalent high level programs from user source program and eventually very fruitful in understanding the syntax of introductory programming languages. To overcome the inherent complexities of unusual and rigid syntax of introductory programming languages, the LPL provide elementary programming concepts in the form of algorithmic and plain natural language based computational statements. The initial results obtained after the introduction of LPL are very encouraging in motivating novice students and improving the retention rate.

The Application of CPA to Calculations of the Mean Magnetic Moment in the Gd1-xNi, Gd1-xFe, Gd1xCox, and Y1-xCox Intermetallic Compounds

DEFF Research Database (Denmark)

Szpunar, B.; Kozarzewski, B.

1977-01-01

with a narrow d-band is considered. The magnetic moment of the alloy at zero temperature is calculated within the molecular field and Hartree-Fock approximations. Disorder is treated in the coherent potential approximation. Results are in good agreement with the experimental data obtained for the crystalline......Calculations are made of the mean magnetic moment per atom of the transition metal and the rare-earth metal in the intermetallic compounds, Gd1-x,Nix, Gd1-x Fex, Gd1-x Cox, and Y1-x Cox. A simple model of the disordered alloy consisting of spins localized on the rare-earth atoms and interacting...

SCCmec Type IX Element in Methicillin Resistant Staphylococcusaureusspa Type t337 (CC9) Isolated from Pigs and Pork in Thailand

DEFF Research Database (Denmark)

Vestergaard, Martin; Cavaco, Lina M; Sirichote, Pantip

2012-01-01

blaZ, aac-aphD, vga(A), tetM, and a tet efflux marker, in all strains and additionally ermB and aadD, cat and fex(A) in the pork isolates. None of the isolates were found PVL-positive, but enterotoxins were identified in all isolates. To our knowledge, only a few descriptions of MRSA in livestock...... and food products in Thailand have been observed but this is the first observation of MRSA CC9 associated with SCCmec IX in pork. This study indicates a likely widespread distribution of MRSA in pig and pork in Thailand and further investigation on the prevalence and importance of livestock associated MRSA...

Analyzing Array Manipulating Programs by Program Transformation

Science.gov (United States)

Cornish, J. Robert M.; Gange, Graeme; Navas, Jorge A.; Schachte, Peter; Sondergaard, Harald; Stuckey, Peter J.

2014-01-01

We explore a transformational approach to the problem of verifying simple array-manipulating programs. Traditionally, verification of such programs requires intricate analysis machinery to reason with universally quantified statements about symbolic array segments, such as "every data item stored in the segment A[i] to A[j] is equal to the corresponding item stored in the segment B[i] to B[j]." We define a simple abstract machine which allows for set-valued variables and we show how to translate programs with array operations to array-free code for this machine. For the purpose of program analysis, the translated program remains faithful to the semantics of array manipulation. Based on our implementation in LLVM, we evaluate the approach with respect to its ability to extract useful invariants and the cost in terms of code size.

46 CFR 151.45-3 - Manning.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Manning. 151.45-3 Section 151.45-3 Shipping COAST GUARD... HAZARDOUS MATERIAL CARGOES Operations § 151.45-3 Manning. Except as provided for in this section, barges need not be manned unless in the judgment of the Officer in Charge, Marine Inspection, such manning is...

46 CFR 10.107 - Definitions in subchapter B.

Science.gov (United States)

2010-10-01

..., but does not mean a barge or any other vessel not regularly operated under its own power. Drug test..., provides no information indicating that his or her character and habits of life would support the belief... primarily to carry oil or hazardous material in bulk as cargo or as cargo residue and propelled by power or...

33 CFR 165.1307 - Elliott Bay, Seattle, WA.

Science.gov (United States)

2010-07-01

...″ N, Longitude 122°22′27″ W; thence returning to the origin. This safety zone resembles a square centered around the barge from which the fireworks will be launched and begins 100 yards from the shoreline of Myrtle Edwards Park. Floating markers will be placed by the sponsor of the fireworks display to...

46 CFR 107.111 - Definitions.

Science.gov (United States)

2010-10-01

... gross tons and non-self-propelled; or (3) More than 65 feet in length and propelled by steam. Muster... unit means a unit with a ship shape or barge type displacement hull of single or multiple hull...) under head of about 35 feet from a distance of about 10 feet, and for a period of 5 minutes, can be...

78 FR 73794 - Taking and Importing Marine Mammals; Taking Marine Mammals Incidental to U.S. Air Force Launches...

Science.gov (United States)

2013-12-09

... dredge, dredging crane, a small tug, dredging barge, dump trucks, and a skip loader. Expected noise...) 3.8 m (12.5 ft) in diameter and 32.5 m (106.6 ft) high) powered by an RD180 engine that burns a liquid propellant fuel consisting of liquid oxygen and RP1 fuel (kerosene). The RD180 engine provides 840...

46 CFR 35.07-10 - Actions required to be logged-TB/ALL.

Science.gov (United States)

2010-10-01

... and over, prior to leaving port for ocean, coastwise, and Great Lakes voyages only. See § 35.20-5. (3... lighting and power systems. Once in each week that the vessel is navigated. See § 35.10-15. (8) Cargo gear... tank barges of 150 gross tons and over, prior to leaving port for ocean, coastwise, and Great Lakes...

76 FR 25278 - Safety Zone; TriMet Bridge Project, Willamette River; Portland, OR

Science.gov (United States)

2011-05-04

... enforcement period, all vessels will be required to transit through the area at a no wake speed and at a safe... submit comments by mail and would like to know that they reached the Facility, please enclose a stamped... crane barges that can be affected by vessel wakes. To ensure the safety of construction crews on the...

33 CFR 165.168 - Safety Zones; Coast Guard Captain of the Port New York Fireworks Displays.

Science.gov (United States)

2010-07-01

... of the Port New York Fireworks Displays. 165.168 Section 165.168 Navigation and Navigable Waters... Guard District § 165.168 Safety Zones; Coast Guard Captain of the Port New York Fireworks Displays. (a... Upper New York Bay within a 360-yard radius of the fireworks barge in approximate position 40°41′16.5″ N...

Social, economic and political factors associated with earth resources observation and information analyses.

Science.gov (United States)

Hall, J. J.

1972-01-01

Discussion of some of the interest conflicts between ecology and economics that arise, particularly in riparian environments, when a population-increase entailed growth in public service requirements is met by indiscriminate technology applications. Reviewed instances of such conflicts include the aborted cross-Florida barge canal project and the Florida Power and Light Company facility at Turkey point.

Subseabed-disposal program: systems-analysis program plan

International Nuclear Information System (INIS)

Klett, R.D.

1981-03-01

This report contains an overview of the Subseabed Nuclear Waste Disposal Program systems analysis program plan, and includes sensitivity, safety, optimization, and cost/benefit analyses. Details of the primary barrier sensitivity analysis and the data acquisition and modeling cost/benefit studies are given, as well as the schedule through the technical, environmental, and engineering feasibility phases of the program

Federal Wind Energy Program. Program summary. [USA

Energy Technology Data Exchange (ETDEWEB)

None

1978-01-01

The objective of the Federal Wind Energy Program is to accelerate the development of reliable and economically viable wind energy systems and enable the earliest possible commercialization of wind power. To achieve this objective for small and large wind systems requires advancing the technology, developing a sound industrial technology base, and addressing the non-technological issues which could deter the use of wind energy. This summary report outlines the projects being supported by the program through FY 1977 toward the achievement of these goals. It also outlines the program's general organization and specific program elements.

Automatic Construction of Java Programs from Functional Program Specifications

OpenAIRE

Md. Humayun Kabir

2015-01-01

This paper presents a novel approach to construct Java programs automatically from the input functional program specifications on natural numbers from the constructive proofs of the input specifications using an inductive theorem prover called Poiti'n. The construction of a Java program from the input functional program specification involves two phases. The theorem prover is used to construct a higher order functional (HOF) program from the input specification expressed as an existential the...

Environmental radioactive intercomparison program and radioactive standards program

Energy Technology Data Exchange (ETDEWEB)

Dilbeck, G. [Environmental Monitoring Systems Laboratory, Las Vegas, NV (United States)

1993-12-31

The Environmental Radioactivity Intercomparison Program described herein provides quality assurance support for laboratories involved in analyzing public drinking water under the Safe Drinking Water Act (SDWA) Regulations, and to the environmental radiation monitoring activities of various agencies. More than 300 federal and state nuclear facilities and private laboratories participate in some phase of the program. This presentation describes the Intercomparison Program studies and matrices involved, summarizes the precision and accuracy requirements of various radioactive analytes, and describes the traceability determinations involved with radioactive calibration standards distributed to the participants. A summary of program participants, sample and report distributions, and additional responsibilities of this program are discussed.

Veterinary Technician Program Director Leadership Style and Program Success

Science.gov (United States)

Renda-Francis, Lori A.

2012-01-01

Program directors of American Veterinary Medical Association (AVMA) accredited veterinary technician programs may have little or no training in leadership. The need for program directors of AVMA-accredited veterinary technician programs to understand how leadership traits may have an impact on student success is often overlooked. The purpose of…

Programming

International Nuclear Information System (INIS)

Jackson, M.A.

1982-01-01

The programmer's task is often taken to be the construction of algorithms, expressed in hierarchical structures of procedures: this view underlies the majority of traditional programming languages, such as Fortran. A different view is appropriate to a wide class of problem, perhaps including some problems in High Energy Physics. The programmer's task is regarded as having three main stages: first, an explicit model is constructed of the reality with which the program is concerned; second, this model is elaborated to produce the required program outputs; third, the resulting program is transformed to run efficiently in the execution environment. The first two stages deal in network structures of sequential processes; only the third is concerned with procedure hierarchies. (orig.)

Knowledge, programming, and programming cultures: LISP, C, and Ada

Science.gov (United States)

Rochowiak, Daniel

1990-01-01

The results of research 'Ada as an implementation language for knowledge based systems' are presented. The purpose of the research was to compare Ada to other programming languages. The report focuses on the programming languages Ada, C, and Lisp, the programming cultures that surround them, and the programming paradigms they support.

System programming languages

OpenAIRE

Šmit, Matej

2016-01-01

Most operating systems are written in the C programming language. Similar is with system software, for example, device drivers, compilers, debuggers, disk checkers, etc. Recently some new programming languages emerged, which are supposed to be suitable for system programming. In this thesis we present programming languages D, Go, Nim and Rust. We defined the criteria which are important for deciding whether programming language is suitable for system programming. We examine programming langua...

Equipment qualification research program: program plan

International Nuclear Information System (INIS)

Dong, R.G.; Smith, P.D.

1982-01-01

The Lawrence Livermore National Laboratory (LLNL) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has developed this program plan for research in equipment qualification (EQA). In this report the research program which will be executed in accordance with this plan will be referred to as the Equipment Qualification Research Program (EQRP). Covered are electrical and mechanical equipment under the conditions described in the OBJECTIVE section of this report. The EQRP has two phases; Phase I is primarily to produce early results and to develop information for Phase II. Phase I will last 18 months and consists of six projects. The first project is program management. The second project is responsible for in-depth evaluation and review of EQ issues and EQ processes. The third project is responsible for detailed planning to initiate Phase II. The remaining three projects address specific equipment; i.e., valves, electrical equipment, and a pump

40 CFR 68.175 - Prevention program/Program 3.

Science.gov (United States)

2010-07-01

... (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Risk Management Plan § 68.175 Prevention program/Program 3. (a) For each Program 3 process, the owner or operator shall provide the information indicated in paragraphs (b) through (p) of this section. If the same information applies to more than one covered process...

A strategy for automatically generating programs in the lucid programming language

Science.gov (United States)

Johnson, Sally C.

1987-01-01

A strategy for automatically generating and verifying simple computer programs is described. The programs are specified by a precondition and a postcondition in predicate calculus. The programs generated are in the Lucid programming language, a high-level, data-flow language known for its attractive mathematical properties and ease of program verification. The Lucid programming is described, and the automatic program generation strategy is described and applied to several example problems.

Stochastic integer programming by dynamic programming

NARCIS (Netherlands)

Lageweg, B.J.; Lenstra, J.K.; Rinnooy Kan, A.H.G.; Stougie, L.; Ermoliev, Yu.; Wets, R.J.B.

1988-01-01

Stochastic integer programming is a suitable tool for modeling hierarchical decision situations with combinatorial features. In continuation of our work on the design and analysis of heuristics for such problems, we now try to find optimal solutions. Dynamic programming techniques can be used to

Applied Energy Program

Science.gov (United States)

Science Programs Applied Energy Programs Civilian Nuclear Energy Programs Laboratory Directed Research » Applied Energy Program Applied Energy Program Los Alamos is using its world-class scientific capabilities to enhance national energy security by developing energy sources with limited environmental impact

Computer-Assisted Program Reasoning Based on a Relational Semantics of Programs

Directory of Open Access Journals (Sweden)

Wolfgang Schreiner

2012-02-01

Full Text Available We present an approach to program reasoning which inserts between a program and its verification conditions an additional layer, the denotation of the program expressed in a declarative form. The program is first translated into its denotation from which subsequently the verification conditions are generated. However, even before (and independently of any verification attempt, one may investigate the denotation itself to get insight into the "semantic essence" of the program, in particular to see whether the denotation indeed gives reason to believe that the program has the expected behavior. Errors in the program and in the meta-information may thus be detected and fixed prior to actually performing the formal verification. More concretely, following the relational approach to program semantics, we model the effect of a program as a binary relation on program states. A formal calculus is devised to derive from a program a logic formula that describes this relation and is subject for inspection and manipulation. We have implemented this idea in a comprehensive form in the RISC ProgramExplorer, a new program reasoning environment for educational purposes which encompasses the previously developed RISC ProofNavigator as an interactive proving assistant.

Abstract Interpretation of PIC programs through Logic Programming

DEFF Research Database (Denmark)

Henriksen, Kim Steen; Gallagher, John Patrick

2006-01-01

, are applied to the logic based model of the machine. A small PIC microcontroller is used as a case study. An emulator for this microcontroller is written in Prolog, and standard programming transformations and analysis techniques are used to specialise this emulator with respect to a given PIC program....... The specialised emulator can now be further analysed to gain insight into the given program for the PIC microcontroller. The method describes a general framework for applying abstractions, illustrated here by linear constraints and convex hull analysis, to logic programs. Using these techniques on the specialised...

Playing by Programming: Making Gameplay a Programming Activity

Science.gov (United States)

Weintrop, David; Wilensky, Uri

2016-01-01

Video games are an oft-cited reason for young learners getting interested in programming and computer science. As such, many learning opportunities build on this interest by having kids program their own video games. This approach, while sometimes successful, has its drawbacks stemming from the fact that the challenge of programming and game…

40 CFR 68.170 - Prevention program/Program 2.

Science.gov (United States)

2010-07-01

... (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Risk Management Plan § 68.170 Prevention program/Program 2. (a) For each Program 2 process, the owner or operator shall provide in the RMP the information... the process. (c) The name(s) of the chemical(s) covered. (d) The date of the most recent review or...

Verification of Imperative Programs by Constraint Logic Program Transformation

Directory of Open Access Journals (Sweden)

Emanuele De Angelis

2013-09-01

Full Text Available We present a method for verifying partial correctness properties of imperative programs that manipulate integers and arrays by using techniques based on the transformation of constraint logic programs (CLP. We use CLP as a metalanguage for representing imperative programs, their executions, and their properties. First, we encode the correctness of an imperative program, say prog, as the negation of a predicate 'incorrect' defined by a CLP program T. By construction, 'incorrect' holds in the least model of T if and only if the execution of prog from an initial configuration eventually halts in an error configuration. Then, we apply to program T a sequence of transformations that preserve its least model semantics. These transformations are based on well-known transformation rules, such as unfolding and folding, guided by suitable transformation strategies, such as specialization and generalization. The objective of the transformations is to derive a new CLP program TransfT where the predicate 'incorrect' is defined either by (i the fact 'incorrect.' (and in this case prog is not correct, or by (ii the empty set of clauses (and in this case prog is correct. In the case where we derive a CLP program such that neither (i nor (ii holds, we iterate the transformation. Since the problem is undecidable, this process may not terminate. We show through examples that our method can be applied in a rather systematic way, and is amenable to automation by transferring to the field of program verification many techniques developed in the field of program transformation.

Building Strong Geoscience Programs: Perspectives From Three New Programs

Science.gov (United States)

Flood, T. P.; Munk, L.; Anderson, S. W.

2005-12-01

During the past decade, at least sixteen geoscience departments in the U.S. that offer a B.S. degree or higher have been eliminated or dispersed. During that same time, three new geoscience departments with degree-granting programs have been developed. Each program has unique student demographics, affiliation (i.e. public institution versus private liberal arts college), geoscience curricula and reasons for initiation. Some of the common themes for each program include; 1) strong devotion to providing field experiences, 2) commitment to student-faculty collaborative research, 3) maintaining traditional geology program elements in the core curriculum and 4) placing students into high quality graduate programs and geoscience careers. Although the metrics for each school vary, each program can claim success in the area of maintaining solid enrollments. This metric is critical because programs are successful only if they have enough students, either in the major and/or general education courses, to convince administrators that continued support of faculty, including space and funding is warranted. Some perspectives gained through the establishment of these new programs may also be applicable to established programs. The success and personality of a program can be greatly affected by the personality of a single faculty member. Therefore, it may not be in the best interest of a program to distribute programmatic work equally among all faculty. For example, critical responsibilities such as teaching core and introductory courses should be the responsibility of faculty who are fully committed to these pursuits. However, if these responsibilities reduce scholarly output, well-articulated arguments should be developed in order to promote program quality and sustainability rather than individual productivity. Field and undergraduate research experiences should be valued as much as high-quality classroom and laboratory instruction. To gain the support of the administration

Interfacing ANSYS to user's programs using UNIX shell program

Energy Technology Data Exchange (ETDEWEB)

Kim, In Yong; Kim, Beom Shig [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1994-01-01

It has been considered to be impossible to interface the ANSYS, which is the commercial finite element code and whose program is not open to public, to the other user's program. When the analysis need to be iterated, the user should wait until the analysis is finished and read the ANSYS result to make the input data for every iteration. In this report the direct interfacing techniques between the ANSYS and the other program using UNIX shell programming are proposed. The detail program lists and the application example are also provided. (Author) 19 refs., 6 figs., 7 tabs.

46 CFR 35.01-10 - Shipping papers-TB/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Shipping papers-TB/ALL. 35.01-10 Section 35.01-10... Requirements § 35.01-10 Shipping papers—TB/ALL. Each loaded tank vessel shall have on board a bill of lading... agent of the owner: Provided, however, That in the case of unmanned barges where shipping papers are not...

46 CFR 172.085 - Hull type.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Hull type. 172.085 Section 172.085 Shipping COAST GUARD... of This Chapter § 172.085 Hull type. If a cargo listed in Table 151.05 of part 151 of this chapter is to be carried, the tank barge must be at least the hull type specified in Table 151.05 of this...

AFM annual report 1983 (Petroleum Industry). [Export Federation for Mineral Oil, Federal Republic of Germany]. AFM Jahresbericht 1983

Energy Technology Data Exchange (ETDEWEB)

1983-01-01

The annual report 1983 of the Export Federation for Mineral Oil (AFM) contains informations about the mineral oil economics, the market development for selected main products and the environmental protection. The AFM terms (standard conditions for barge transactions) for the mineral oil industry are given. The AFM Oil Market Report Daily has extended the frame of its reports in 1983.

46 CFR 69.209 - Calculation of tonnages.

Science.gov (United States)

2010-10-01

....67 LBD/100. (2) The gross tonnage of a vessel with a hull that approximates in shape a rectangular geometric solid (barge-shape) is 0.84 LBD/100. (3) The gross tonnage of a multi-hull vessel is the sum of... structure in tons of 100 cubic feet is added to the tonnage of the hull to establish the vessel's gross...

Verification of Design and Construction Techniques for Gaillard Island Dredged Material Disposal Area, Mobile, Alabama.

Science.gov (United States)

1986-08-01

the dike centerline. Small pen-lite flashlight bulbs and dry cell batteries were taped to the bamboo poles so the spill and haul barges could work at...fDY 01TO .3 0 1000 200 300 ------ -STATION 35+00 9.0: ... .4.. ... 3 ~~ U. -- "I-- 2IU MY STAMIN 30+D0 BI DOTI O ............ ......4 ..+.0

Clean Coal Technology Demonstration Program: Program update 1993

Energy Technology Data Exchange (ETDEWEB)

1994-03-01

The Clean Coal Technology Demonstration Program (also referred to as the CCT Program) is a $6.9 billion cost-shared industry/government technology development effort. The program is to demonstrate a new generation of advanced coal-based technologies, with the most promising technologies being moved into the domestic and international marketplace. Technology has a vital role in ensuring that coal can continue to serve U.S. energy interests and enhance opportunities for economic growth and employment while meeting the national committment to a clean and healthy global environment. These technologies are being advanced through the CCT Program. The CCT Program supports three substantive national objectives: ensuring a sustainable environment through technology; enhancing energy efficiency and reliability; providing opportunities for economic growth and employment. The technologies being demonstrated under the CCT Program reduce the emissions of sulfur oxides, nitrogen oxides, greenhouse gases, hazardous air pollutants, solid and liquid wastes, and other emissions resulting from coal use or conversion to other fuel forms. These emissions reductions are achieved with efficiencies greater than or equal to currently available technologies.

75 FR 58468 - Terrorism Risk Insurance Program; Program Loss Reporting

Science.gov (United States)

2010-09-24

... DEPARTMENT OF THE TREASURY Terrorism Risk Insurance Program; Program Loss Reporting AGENCY: Departmental Offices, Terrorism Risk Insurance Program Office, Treasury. ACTION: Notice and request for... 1995, Public Law 104-13 (44 U.S.C. 3506(c)(2)(A)). Currently, the Terrorism Risk Insurance Program...

Functional Programming in C# Classic Programming Techniques for Modern Projects

CERN Document Server

Sturm, Oliver

2011-01-01

Take advantage of the growing trend in functional programming. C# is the number-one language used by .NET developers and one of the most popular programming languages in the world. It has many built-in functional programming features, but most are complex and little understood. With the shift to functional programming increasing at a rapid pace, you need to know how to leverage your existing skills to take advantage of this trend. Functional Programming in C# leads you along a path that begins with the historic value of functional ideas. Inside, C# MVP and functional programming expert Oli

PLC Programming

International Nuclear Information System (INIS)

Lee, Seong Jae; Wi, Seong Dong; Yoo, Jong Seon; Kim, Se Chan

2001-02-01

This book tells of PLC programming for KGL-WIN with summary of PLC, performance and function of PLC like characteristic of KGL-WIN, connection method with PLC, basic performance of K200S/K300S/K1000S, diagram of input and output H/W, writing project, staring the program, editing of program, on-line function, debugging and instructions like control, timer and counter, data transmission, comparison, rotation and moving, system, data operating data conversion and application program.

Material Programming

DEFF Research Database (Denmark)

Vallgårda, Anna; Boer, Laurens; Tsaknaki, Vasiliki

2017-01-01

. Consequently we ask what the practice of programming and giving form to such materials would be like? How would we be able to familiarize ourselves with the dynamics of these materials and their different combinations of cause and effect? Which tools would we need and what would they look like? Will we program......, and color, but additionally being capable of sensing, actuating, and computing. Indeed, computers will not be things in and by themselves, but embedded into the materials that make up our surroundings. This also means that the way we interact with computers and the way we program them, will change...... these computational composites through external computers and then transfer the code them, or will the programming happen closer to the materials? In this feature we outline a new research program that floats between imagined futures and the development of a material programming practice....

Practical C++ programming

National Research Council Canada - National Science Library

Oualline, Steve

2003-01-01

... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4 6 3 2. The Basics of Program Writing Programs from Conception to Execution Creating a Real Program Getting Help in Unix Getting Help in an IDE Programming...

Clean Coal Technology Programs: Program Update 2009

Energy Technology Data Exchange (ETDEWEB)

None

2009-10-01

The purpose of the Clean Coal Technology Programs: Program Update 2009 is to provide an updated status of the U.S. Department of Energy (DOE) commercial-scale demonstrations of clean coal technologies (CCT). These demonstrations have been performed under the Clean Coal Technology Demonstration Program (CCTDP), the Power Plant Improvement Initiative (PPII), and the Clean Coal Power Initiative (CCPI). Program Update 2009 provides: (1) a discussion of the role of clean coal technology demonstrations in improving the nation’s energy security and reliability, while protecting the environment using the nation’s most abundant energy resource—coal; (2) a summary of the funding and costs of the demonstrations; and (3) an overview of the technologies being demonstrated, along with fact sheets for projects that are active, recently completed, or recently discontinued.

Removal of antibiotics and antibiotic resistance genes from domestic sewage by constructed wetlands: Optimization of wetland substrates and hydraulic loading.

Science.gov (United States)

Chen, Jun; Wei, Xiao-Dong; Liu, You-Sheng; Ying, Guang-Guo; Liu, Shuang-Shuang; He, Liang-Ying; Su, Hao-Chang; Hu, Li-Xin; Chen, Fan-Rong; Yang, Yong-Qiang

2016-09-15

This study aimed to assess removal potential of antibiotics and antibiotic resistance genes (ARGs) in raw domestic wastewater by various mesocosm-scale horizontal subsurface-flow constructed wetlands (CWs) planted Cyperus alternifolius L. with different design parameters. Twelve CWs with three hydraulic loading rates (HLR 10, 20 and 30cm/day) and four substrates (oyster shell, zeolite, medical stone and ceramic) were set up in order to select the best optimized wetland. The result showed that 7 target antibiotics compounds including erythromycin-H2O, lincomycin, monensin, ofloxacin, sulfamerazine, sulfamethazine and novobiocin were detected, and all selected 18 genes (three sulfonamide resistance genes (sul1, sul2 and sul3), four tetracycline resistance genes (tetG, tetM, tetO and tetX), two macrolide resistance genes (ermB and ermC), three quinolone resistance genes (qnrB, qnrD and qnrS) and four chloramphenicol resistance genes (cmlA, fexA, fexB and floR)) and two integrase genes (int1 and int2) were positively detected in the domestic wastewaters. The aqueous removal rates of the total antibiotics ranged from17.9 to 98.5%, while those for the total ARGs varied between 50.0 and 85.8% by the mesocosm-scale CWs. After considering their aqueous removal rates in combination with their mass removals, the CW with zeolite as the substrate and HLR of 20cm/day was selected as the best choice. Combined chemical and biological analyses indicate that both microbial degradation and physical sorption processes were responsible for the fate of antibiotics and ARGs in the wetlands. The findings from this study suggest constructed wetlands could be a promising technology for the removal of emerging contaminants such as antibiotics and ARGs in domestic wastewater. Copyright © 2015 Elsevier B.V. All rights reserved.

Distribution of the multidrug resistance gene cfr in Staphylococcus species isolates from swine farms in China.

Science.gov (United States)

Wang, Yang; Zhang, Wanjiang; Wang, Juan; Wu, Congming; Shen, Zhangqi; Fu, Xiao; Yan, Yang; Zhang, Qijing; Schwarz, Stefan; Shen, Jianzhong

2012-03-01

A total of 149 porcine Staphylococcus isolates with florfenicol MICs of ≥ 16 μg/ml were screened for the presence of the multiresistance gene cfr, its location on plasmids, and its genetic environment. In total, 125 isolates carried either cfr (16 isolates), fexA (92 isolates), or both genes (17 isolates). The 33 cfr-carrying staphylococci, which included isolates of the species Staphylococcus cohnii, S. arlettae, and S. saprophyticus in which the cfr gene has not been described before, exhibited a wide variety of SmaI pulsed-field gel electrophoresis patterns. In 18 cases, the cfr gene was located on plasmids. Four different types of cfr-carrying plasmids--pSS-01 (n = 2; 40 kb), pSS-02 (n = 3; 35.4 kb), pSS-03 (n = 10; 7.1 kb), and pBS-01 (n = 3; 16.4 kb)--were differentiated on the basis of their sizes, restriction patterns, and additional resistance genes. Sequence analysis revealed that in plasmid pSS-01, the cfr gene was flanked in the upstream part by a complete aacA-aphD-carrying Tn4001-like transposon and in the downstream part by a complete fexA-carrying transposon Tn558. In plasmid pSS-02, an insertion sequence IS21-558 and the cfr gene were integrated into transposon Tn558 and thereby truncated the tnpA and tnpB genes. The smallest cfr-carrying plasmid pSS-03 carried the macrolide-lincosamide-streptogramin B resistance gene erm(C). Plasmid pBS-01, previously described in Bacillus spp., harbored a Tn917-like transposon, including the macrolide-lincosamide-streptogramin B resistance gene erm(B) in the cfr downstream region. Plasmids, which in part carry additional resistance genes, seem to play an important role in the dissemination of the gene cfr among porcine staphylococci.

Sorption of citalopram, irbesartan and fexofenadine in soils: Estimation of sorption coefficients from soil properties.

Science.gov (United States)

Klement, Aleš; Kodešová, Radka; Bauerová, Martina; Golovko, Oksana; Kočárek, Martin; Fér, Miroslav; Koba, Olga; Nikodem, Antonín; Grabic, Roman

2018-03-01

The sorption of 3 pharmaceuticals, which may exist in 4 different forms depending on the solution pH (irbesartan in cationic, neutral and anionic, fexofenadine in cationic, zwitter-ionic and anionic, and citalopram cationic and neutral), in seven different soils was studied. The measured sorption isotherms were described by Freundlich equations, and the sorption coefficients, K F (for the fixed n exponent for each compound), were related to the soil properties to derive relationships for estimating the sorption coefficients from the soil properties (i.e., pedotransfer rules). The largest sorption was obtained for citalopram (average K F value for n = 1 was 1838 cm 3  g -1 ) followed by fexofenadine (K F  = 35.1 cm 3/n μg 1-1/n g -1 , n = 1.19) and irbesartan (K F  = 3.96 cm 3/n μg 1-1/n g -1 , n = 1.10). The behavior of citalopram (CIT) in soils was different than the behaviors of irbesartan (IRB) and fexofenadine (FEX). Different trends were documented according to the correlation coefficients between the K F values for different compounds (R IRB,FEX  = 0.895, p-valuesoil properties in the pedotransfer functions. While the K F value for citalopram was positively related to base cation saturation (BCS) or sorption complex saturation (SCS) and negatively correlated to the organic carbon content (Cox), the K F values of irbesartan and fexofenadine were negatively related to BCS, SCS or the clay content and positively related to Cox. The best estimates were obtained by combining BCS and Cox for citalopram (R 2  = 93.4), SCS and Cox for irbesartan (R 2  = 96.3), and clay content and Cox for fexofenadine (R 2  = 82.9). Copyright © 2017 Elsevier Ltd. All rights reserved.

Iron-doped nickel oxide nanocrystals as highly efficient electrocatalysts for alkaline water splitting.

Science.gov (United States)

Fominykh, Ksenia; Chernev, Petko; Zaharieva, Ivelina; Sicklinger, Johannes; Stefanic, Goran; Döblinger, Markus; Müller, Alexander; Pokharel, Aneil; Böcklein, Sebastian; Scheu, Christina; Bein, Thomas; Fattakhova-Rohlfing, Dina

2015-05-26

Efficient electrochemical water splitting to hydrogen and oxygen is considered a promising technology to overcome our dependency on fossil fuels. Searching for novel catalytic materials for electrochemical oxygen generation is essential for improving the total efficiency of water splitting processes. We report the synthesis, structural characterization, and electrochemical performance in the oxygen evolution reaction of Fe-doped NiO nanocrystals. The facile solvothermal synthesis in tert-butanol leads to the formation of ultrasmall crystalline and highly dispersible FexNi1-xO nanoparticles with dopant concentrations of up to 20%. The increase in Fe content is accompanied by a decrease in particle size, resulting in nonagglomerated nanocrystals of 1.5-3.8 nm in size. The Fe content and composition of the nanoparticles are determined by X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy measurements, while Mössbauer and extended X-ray absorption fine structure analyses reveal a substitutional incorporation of Fe(III) into the NiO rock salt structure. The excellent dispersibility of the nanoparticles in ethanol allows for the preparation of homogeneous ca. 8 nm thin films with a smooth surface on various substrates. The turnover frequencies (TOF) of these films could be precisely calculated using a quartz crystal microbalance. Fe0.1Ni0.9O was found to have the highest electrocatalytic water oxidation activity in basic media with a TOF of 1.9 s(-1) at the overpotential of 300 mV. The current density of 10 mA cm(-2) is reached at an overpotential of 297 mV with a Tafel slope of 37 mV dec(-1). The extremely high catalytic activity, facile preparation, and low cost of the single crystalline FexNi1-xO nanoparticles make them very promising catalysts for the oxygen evolution reaction.

Stability of iron-rich magnesiowüstite in Earth's lower mantle

Science.gov (United States)

Ohta, K.; Fujino, K.; Kuwayama, Y.; Kondo, T.; Shimizu, K.; Ohishi, Y.

2012-12-01

At ambient conditions, MgO periclase and FeO wüstite form a solid solution (Mg1-xFex)O, named ferropericlase (x ≤ 0.5) and magnesiowüstite (x > 0.5). (Mg1-xFex)O ferropericlase is considered to be a major component of Earth's lower mantle, and may play an important role for its structure and dynamics. Iron-rich magnesiowüstite also needs to be considered because of possible iron enrichment at the core-mantle boundary region [e.g., Nomura et al., 2011]. Recent laser-heated diamond anvil cell experiments on FeO revealed that NaCl-type (B1) structured FeO underwent an insulator-metal transition at about 70 GPa and 1800 K without any structural transformation [Fischer et al., 2011; Ohta et al., 2012]. These results imply that the metallic B1 FeO would require a two-phase field for the MgO-FeO binary system due to different chemical bonding between insulating MgO and metallic FeO. We performed simultaneous electrical conductivity and x-ray diffraction measurements on (Mg0.20Fe0.80)O and (Mg0.05Fe0.95)O magnesiowüstite up to 140 GPa and 2100 K, and then examined recovered samples by using analytical transmission electron microprobe. We obtained some evidences for the dissociation of (Mg0.05Fe0.95)O into lighter and heavier phases than starting material occurring above 70 GPa and 1900 K, which is most likely due to the metallization of FeO component. On the other hand, we did not observe such dissociation and metallization in (Mg0.20Fe0.80)O. Observed dissociation in (Mg0.05Fe0.95)O might contribute to the heterogeneity in seismic wave and electrical conductivity at the Earth's core-mantle boundary region.

Program overview: Subsurface science program

International Nuclear Information System (INIS)

1994-03-01

The OHER Subsurface Science Program is DOE's core basic research program concerned with subsoils and groundwater. These practices have resulted in contamination by mixtures of organic chemicals, inorganic chemicals, and radionuclides. A primary long-term goal is to provide a foundation of knowledge that will lead to the reduction of environmental risks and to cost-effective cleanup strategies. Since the Program was initiated in 1985, a substantial amount of research in hydrogeology, subsurface microbiology, and the geochemistry of organically complexed radionuclides has been completed, leading to a better understanding of contaminant transport in groundwater and to new insights into microbial distribution and function in the subsurface environments. The Subsurface Science Program focuses on achieving long-term scientific advances that will assist DOE in the following key areas: providing the scientific basis for innovative in situ remediation technologies that are based on a concept of decontamination through benign manipulation of natural systems; understanding the complex mechanisms and process interactions that occur in the subsurface; determining the influence of chemical and geochemical-microbial processes on co-contaminant mobility to reduce environmental risks; improving predictions of contaminant transport that draw on fundamental knowledge of contaminant behavior in the presence of physical and chemical heterogeneities to improve cleanup effectiveness and to predict environmental risks

MatLab Programming for Engineers Having No Formal Programming Knowledge

Science.gov (United States)

Shaykhian, Linda H.; Shaykhian, Gholam Ali

2007-01-01

MatLab is one of the most widely used very high level programming languages for Scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. Also, stated are the current limitations of the MatLab, which possibly can be taken care of by Mathworks Inc. in a future version to make MatLab more versatile.

C++ Programming Language

Science.gov (United States)

Shaykhian, Gholam Ali

2007-01-01

C++ Programming Language: The C++ seminar covers the fundamentals of C++ programming language. The C++ fundamentals are grouped into three parts where each part includes both concept and programming examples aimed at for hands-on practice. The first part covers the functional aspect of C++ programming language with emphasis on function parameters and efficient memory utilization. The second part covers the essential framework of C++ programming language, the object-oriented aspects. Information necessary to evaluate various features of object-oriented programming; including encapsulation, polymorphism and inheritance will be discussed. The last part of the seminar covers template and generic programming. Examples include both user defined and standard templates.

Site Support Program Plan Infrastructure Program

International Nuclear Information System (INIS)

1995-01-01

The Fiscal Year 1996 Infrastructure Program Site Support Program Plan addresses the mission objectives, workscope, work breakdown structures (WBS), management approach, and resource requirements for the Infrastructure Program. Attached to the plan are appendices that provide more detailed information associated with scope definition. The Hanford Site's infrastructure has served the Site for nearly 50 years during defense materials production. Now with the challenges of the new environmental cleanup mission, Hanford's infrastructure must meet current and future mission needs in a constrained budget environment, while complying with more stringent environmental, safety, and health regulations. The infrastructure requires upgrading, streamlining, and enhancement in order to successfully support the site mission of cleaning up the Site, research and development, and economic transition

Computer program CDCID: an automated quality control program using CDC update

International Nuclear Information System (INIS)

Singer, G.L.; Aguilar, F.

1984-04-01

A computer program, CDCID, has been developed in coordination with a quality control program to provide a highly automated method of documenting changes to computer codes at EG and G Idaho, Inc. The method uses the standard CDC UPDATE program in such a manner that updates and their associated documentation are easily made and retrieved in various formats. The method allows each card image of a source program to point to the document which describes it, who created the card, and when it was created. The method described is applicable to the quality control of computer programs in general. The computer program described is executable only on CDC computing systems, but the program could be modified and applied to any computing system with an adequate updating program

General edition program

International Nuclear Information System (INIS)

Vaturi, Sylvain

1969-01-01

Computerized edition is essential for data processing exploitation. When a more or less complex edition program is required for each task, then the need for a general edition program become obvious. The aim of this study is to create a general edition program. Universal programs are capable to execute numerous and varied tasks. For a more precise processing, the execution of which is frequently required, the use of a specialized program is preferable because, contradictory to the universal program, it goes straight to the point [fr

Preretirement Programs within Service Firms: Existing and Planned Programs.

Science.gov (United States)

Siegel, Sidney R.; Rives, Janet M.

1980-01-01

A study of 300 nonmanufacturing firms' current and projected preretirement programs indicated that (1) personnel departments have primary responsibility for existing programs, (2) focus is changing from financial planning to psychological counseling, and (3) such programs benefit the company as well as the employee. (SK)

Performance Demonstration Program Plan for the WIPP Experimental-Waste Characterization Program

International Nuclear Information System (INIS)

1991-02-01

The Performance Demonstration Program is designed to ensure that compliance with the Quality Assurance Objective, identified in the Quality Assurance Program Plan for the WIPP Experimental-Waste Characterization Program (QAPP), is achieved. This Program Plan is intended for use by the WPO to assess the laboratory support provided for the characterization of WIPP TRU waste by the storage/generator sites. Phase 0 of the Performance Demonstration Program encompasses the analysis of headspace gas samples for inorganic and organic components. The WPO will ensure the implementation of this plan by designating an independent organization to coordinate and provide technical oversight for the program (Program Coordinator). Initial program support, regarding the technical oversight and coordination functions, shall be provided by the USEPA-ORP. This plan identifies the criteria that will be used for the evaluation of laboratory performance, the responsibilities of the Program Coordinator, and the responsibilities of the participating laboratories. 5 tabs

Functional Python programming

CERN Document Server

Lott, Steven

2015-01-01

This book is for developers who want to use Python to write programs that lean heavily on functional programming design patterns. You should be comfortable with Python programming, but no knowledge of functional programming paradigms is needed.

Program evaluation: Weatherization Residential Assistance Partnership (WRAP) Program

Energy Technology Data Exchange (ETDEWEB)

1991-12-01

The Connecticut low income weatherization program was developed in response to a 1987 rate docket order from the Connecticut Department of Public Utility Control (DPUC) to Connecticut Light Power Co., an operating subsidiary of Northeast Utilities (NU). (Throughout this report, NU is referred to as the operator of the program.) This program, known as the Weatherization Residential Assistance Partnership, or WRAP, was configured utilizing input from a collaborative group of interested parties to the docket. It was agreed that this program would be put forth by the electric utility, but would not ignore oil and gas savings (thus, it was to be fuel- blind''). The allocated cost of conservation services for each fuel source, however, should be cost effective. It was to be offered to those utility customers at or below 200 percent of the federal poverty levels, and provide a wide array of energy saving measures directed toward heating, water heating and lighting. It was felt by the collaborative group that this program would raise the level of expenditures per participant for weatherization services provided by the state, and by linking to and revising the auditing process for weatherization, would lower the audit unit cost. The program plans ranged from the offering of low-cost heating, water heating and infiltration measures, increased insulation levels, carpentry and plumbing services, to furnace or burner replacement. The program was configured to allow for very comprehensive weatherization and heating system servicing.

Programming for controlling of pulse radiolysis setup. Program RADIO96

International Nuclear Information System (INIS)

Mirkowski, J.; Grodkowski, J.

1998-01-01

Program RADIO96 was written in Pascal using DELPHI 1.0 (Borland) programming platform. It can operate on IBM PC compatible computers in WINDOWS 3x or WINDOWS'95 environment. The program is dedicated to the pulse radiolysis setup based on the linear electron accelerator LAE 13/9 of the Department of Radiation Chemistry and Technology of the INCT. This work was based on apparatus and results described before and also on programming manuals of used equipment and technical data of programming platform. (author)

Correlated evolution of colossal thermoelectric effect and Kondo insulating behavior

Directory of Open Access Journals (Sweden)

M. K. Fuccillo

2013-12-01

Full Text Available We report the magnetic and transport properties of the Ru1−xFexSb2 solid solution, showing how the colossal thermoelectric performance of FeSb2 evolves due to changes in the amount of 3d vs. 4d electron character. The physical property trends shed light on the physical picture underlying one of the best low-T thermoelectric power factors known to date. Some of the compositions warrant further study as possible n- and p-type thermoelements for Peltier cooling well below 300 K. Our findings enable us to suggest possible new Kondo insulating systems that might behave similarly to FeSb2 as advanced thermoelectrics.

Fire safety of LPG in marine transportation. Final report

Energy Technology Data Exchange (ETDEWEB)

Martinsen, W.E.; Johnson, D.W.; Welker, J.R.

1980-06-01

This report contains an analytical examination of cargo spill and fire hazard potential associated with the marine handling of liquefied petroleum gas (LPG) as cargo. Principal emphasis was on cargo transfer operations for ships unloading at receiving terminals, and barges loading or unloading at a terminal. Major safety systems, including emergency shutdown systems, hazard detection systems, and fire extinguishment and control systems were included in the analysis. Spill probabilities were obtained from fault tree analyses utilizing composite LPG tank ship and barge designs. Failure rates for hardware in the analyses were generally taken from historical data on similar generic classes of hardware, there being very little historical data on the specific items involved. Potential consequences of cargo spills of various sizes are discussed and compared to actual LPG vapor cloud incidents. The usefulness of hazard mitigation systems (particularly dry chemical fire extinguishers and water spray systems) in controlling the hazards posed by LPG spills and spill fires is also discussed. The analysis estimates the probability of fatality for a terminal operator is about 10/sup -6/ to 10/sup -5/ per cargo transfer operation. The probability of fatality for the general public is substantially less.

Using systematic and comparative GC/MS and GC/FID data to identify the source of an unknown oil on contaminated birds

International Nuclear Information System (INIS)

Wang, Z.; Fingas, M.; Landriault, M.; Sigouin, L.; Feng, Y.

1996-01-01

A method to identify and differentiate spilled oil and petroleum products was developed. In January 1996, four birds covered with an unknown oil were found near Larchipel-de-Mingan National Park in Quebec. Environment Canada wanted to know if the oil came from a leak in a barge which was grounded on Anticosti Island. To do so, it was necessary to determine the nature of the oil, the type of petroleum hydrocarbons, the age, the weathering and degradation extent of the spilled oil, and changes in oil character since the occurrence of any possible spill. The analytical approach to determine the source of the unknown oil was described. The analysis of individual aliphatic, aromatic, and biomarker hydrocarbons were made with the use of gas chromatography/mass spectroscopy (GC/MS), and gas chromatography/flame ionization detector (GC/FID). Pattern recognition plot analysis was also used in determining the source of the oil. It was concluded that the residual oil on the birds was not from the suspected barge oil, and was most probably old, highly weathered, somewhat biodegraded bunker type oil. 23 refs., 5 tabs., 7 figs

Computation accuracy of flow conditions around a very large floating structure using a multi-layer model. Comparison with experimental results; Taso model ni yoru choogata futai mawari no ryukyo keisan seido ni tsuite. Jikken tono hikaku

Energy Technology Data Exchange (ETDEWEB)

Kyotsuka, Y [Kyushu University, Fukuoka (Japan); Omori, H; Nakagawa, H; Kobayashi, M [Mitsui Engineering and Shipbuilding Co. Ltd., Tokyo (Japan)

1996-04-10

As one of the environmental problems in sea areas surrounding a very large floating structure (VLFS), change in flow condition is important, and it is one of the factors dominating the prediction of succeeding diffusion and ecosystems. Although a multi-layer model is in wide use for computation of flow condition and diffusion in one inner bay, its applicability should be reexamined because of no consideration of VLFSs. In this study, flow velocity profiles around a barge were then measured through the towing test of a barge in shallow water, and compared with computation results using a multi-layer model. The multi-layer model computed the flow velocity profiles by dividing the flow region to be computed into normal one and that under VLFS, and determined pressures under VLFS by 2-D Poisson`s equation. Slip condition was used as boundary condition at the bottom considering the number of layers under VLFS. Further numerical computation was conducted by 2-D MAC method, in particular, to compare flow around the wake of VLFS with experimental one. Both computation results well agreed with experimental one. 3 refs., 9 figs., 1 tab.

Maritime Fuel Cell Generator Project.

Energy Technology Data Exchange (ETDEWEB)

Pratt, Joseph William [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2017-07-01

Fuel costs and emissions in maritime ports are an opportunity for transportation energy efficiency improvement and emissions reduction efforts. Ocean-going vessels, harbor craft, and cargo handling equipment are still major contributors to air pollution in and around ports. Diesel engine costs continually increase as tighter criteria pollutant regulations come into effect and will continue to do so with expected introduction of carbon emission regulations. Diesel fuel costs will also continue to rise as requirements for cleaner fuels are imposed. Both aspects will increase the cost of diesel-based power generation on the vessel and on shore. Although fuel cells have been used in many successful applications, they have not been technically or commercially validated in the port environment. One opportunity to do so was identified in Honolulu Harbor at the Young Brothers Ltd. wharf. At this facility, barges sail regularly to and from neighbor islands and containerized diesel generators provide power for the reefers while on the dock and on the barge during transport, nearly always at part load. Due to inherent efficiency characteristics of fuel cells and diesel generators, switching to a hydrogen fuel cell power generator was found to have potential emissions and cost savings.

Programming F#

CERN Document Server

Smith, Chris

2009-01-01

Why learn F#? This multi-paradigm language not only offers you an enormous productivity boost through functional programming, it also lets you develop applications using your existing object-oriented and imperative programming skills. With Programming F#, you'll quickly discover the many advantages of Microsoft's new language, which includes access to all the great tools and libraries of the .NET platform. Learn how to reap the benefits of functional programming for your next project -- whether it's quantitative computing, large-scale data exploration, or even a pursuit of your own. With th

Programming Interactivity

CERN Document Server

Noble, Joshua

2009-01-01

Make cool stuff. If you're a designer or artist without a lot of programming experience, this book will teach you to work with 2D and 3D graphics, sound, physical interaction, and electronic circuitry to create all sorts of interesting and compelling experiences -- online and off. Programming Interactivity explains programming and electrical engineering basics, and introduces three freely available tools created specifically for artists and designers: Processing, a Java-based programming language and environment for building projects on the desktop, Web, or mobile phonesArduino, a system t

Choreographic Programming

DEFF Research Database (Denmark)

Montesi, Fabrizio

, as they offer a concise view of the message flows enacted by a system. For this reason, in the last decade choreographies have been used in the development of programming languages, giving rise to a programming paradigm that in this dissertation we refer to as Choreographic Programming. Recent studies show...... endpoint described in a choreography can then be automatically generated, ensuring that such implementations are safe by construction. However, current formal models for choreographies do not deal with critical aspects of distributed programming, such as asynchrony, mobility, modularity, and multiparty...... sessions; it remains thus unclear whether choreographies can still guarantee safety when dealing with such nontrivial features. This PhD dissertation argues for the suitability of choreographic programming as a paradigm for the development of safe distributed systems. We proceed by investigating its...

Teaching object-oriented programming on top of functional programming

DEFF Research Database (Denmark)

Kristensen, Jens Thyge; Hansen, Michael Reichhardt; Richel, Hans

2001-01-01

programming in the construction of OO programs. This is done following a method where the program design is expressed in SML and afterwards implemented in Java. The use of different languages in design and implementation is an advantage as it makes the distinction between these two stages very clear...

Site Support Program Plan Infrastructure Program

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-26

The Fiscal Year 1996 Infrastructure Program Site Support Program Plan addresses the mission objectives, workscope, work breakdown structures (WBS), management approach, and resource requirements for the Infrastructure Program. Attached to the plan are appendices that provide more detailed information associated with scope definition. The Hanford Site`s infrastructure has served the Site for nearly 50 years during defense materials production. Now with the challenges of the new environmental cleanup mission, Hanford`s infrastructure must meet current and future mission needs in a constrained budget environment, while complying with more stringent environmental, safety, and health regulations. The infrastructure requires upgrading, streamlining, and enhancement in order to successfully support the site mission of cleaning up the Site, research and development, and economic transition.

Employee Assistance Programs.

Science.gov (United States)

Levine, Hermine Zagat

1985-01-01

The author reports company responses to a questionnaire concerning employee assistance programs (EAP). Answers concern EAP structure, staff training, use of outside consultant, services provided by EAPs, program administration, employee confidence in EAPs, advertising the program, program philosophy, problems encountered by EAP users, coverage and…

Assembly processor program converts symbolic programming language to machine language

Science.gov (United States)

Pelto, E. V.

1967-01-01

Assembly processor program converts symbolic programming language to machine language. This program translates symbolic codes into computer understandable instructions, assigns locations in storage for successive instructions, and computer locations from symbolic addresses.

Development of NUPAC 140B 100 ton rail/barge cask

International Nuclear Information System (INIS)

1990-04-01

The 140-B Cask Ancillary Equipment includes all cask-related hardware necessary for a complete transportation package and for handling of the cask at shipping and receiving facilities. The transportation package equipment includes the cask tiedown system, the railcar and the sunshield/personnel barrier. The cask handling systems include both single and dual load path cask lifting fixtures, a cask uprighting system, an intermodal transfer system, and the cask drain and fill system. This document describes the individual systems in terms of their purpose, their function, and their mechanical features. Structural analyses are provided for the cask lifting and tiedown devices. The cask ancillary equipment will also include special tools and equipment such as seal surface protection device, special torque wrenches, leak test equipment, etc., for handling the cask at a reactor site. Although final design work remains to be completed, the ancillary equipment design information presented in this document ensures that the 140-B cask transportation package will meet or exceed all structural, functional, and operational requirements, within the specified gross vehicle weight limit. 18 figs

75 FR 70083 - Emergency Forest Restoration Program and Emergency Conservation Program

Science.gov (United States)

2010-11-17

... Restoration Program and Emergency Conservation Program AGENCY: Farm Service Agency, USDA. ACTION: Interim rule. SUMMARY: The Farm Service Agency (FSA) is amending regulations as required by the Food, Conservation, and... as follows: PART 701--EMERGENCY CONSERVATION PROGRAM, EMERGENCY FOREST RESTORATION PROGRAM, AND...

Preliminary Marine Safety Risk Assessment, Brandon Road Lock and Dam Invasive Species Control Measures

Science.gov (United States)

2016-12-01

Decision makers must include control-measure monitoring and emergency “interventions” to insure safety. The Coast Guard operational commanders...system” incorporates a travelling car on a rail above the barge-loading wharf to prevent loading personnel, cargo surveyors, or others from falling...to the Gulf of Mexico . As “Loopers”, they will have already transited the CSSC electric barriers. Preliminary Marine Safety Risk Assessment, BRLD

Introduction to Using Native Plant Community on Dredge Material Placement Areas

Science.gov (United States)

2017-05-01

solutions, such as riprap. In some cases, plants may also reduce offsite transport of particles from the surface of the sediments placed in the...to 30% of the in situ sediment volume). Hydraulic dredging, which involves re-suspension of sediments into a slurry that is then pumped through a...may be mechanically dredged and mechanically offloaded from barges, mechanically dredged and hydraulically offloaded, or hydraulically dredging and

Technical Guidelines for Environmental Dredging of Contaminated Sediments

Science.gov (United States)

2008-09-01

material from barges to adjacent rehandling facilities or to move material relatively short distances. Conveyors can also be used to transfer ...by direct dumping or unloading into a chute or conveyor . Truck transport of treated material to landfills may also be considered. The material...environmental dredging for purposes of a feasibility study, remedial design , and implementation. The scope of this document is limited to the technical

Overdepth Dredging and Characterization Depth Recommendations

Science.gov (United States)

2007-06-01

bucket is hoisted to the surface and usually side dumped into a barge or sidecast to its placement site. The general clamshell dredge’s horizontal...excavation accuracies vary as a function of type of dredging equipment used (mechanical or hydraulic ) and interaction with site-specific physical...surveys. Dredge excavation accuracies vary as a function of the type of dredging equipment used (mechanical or hydraulic ) and its respective

Programming with joystick

OpenAIRE

Banič, Nejc

2014-01-01

In this thesis, we implemented a way of programming by means of gaming accessories. The main reason is that to show a diferent way of developing programs, because vast majority of programers are using two input / output devices: keyboard and mouse. These two devices have become standard and will definitely remain so in the future. For our implementation, we used high-level programming language Java and NetBeans integrated development environment. The program is actually a ...

Combining program visualization with programming workspace to assist students for completing programming laboratory task

Directory of Open Access Journals (Sweden)

Elvina Elvina

2018-06-01

Full Text Available Numerous Program Visualization tools (PVs have been developed for assisting novice students to understand their source code further. However, none of them are practical to be used in the context of completing programming laboratory task; students are required to keep switching between PV and programming workspace when they need to know how their code works. This paper combines PV with programming workspace to handle such issue. Resulted tool (which is named PITON has 13 features extracted from PythonTutor, PyCharm, and student’s feedbacks about PythonTutor. According to think-aloud and user study, PITON is more practical to be used than a combination of PythonTutor and PyCharm. Further, its features are considerably helpful; students rated these features as useful and frequently used.

An Attempt of Making Program-Generated Animation in a Beginners’ Programming Class

Science.gov (United States)

Matsuyama, Chieko; Nakashima, Toyoshiro; Ishii, Naohiro

In general, mathematical subjects are used for programming education in universities. In this case, many students lose the interest in the programming because the students have the preconception that is difficult to program by using the mathematical expressions. Especially beginners of the programming are a tendency to lose the interest. Therefore it is pointed out to use the subjects which do not need mathematical knowledge as much as possible. In this paper the authors have tried to make animation that are generated by programs instead of the mathematical subjects in a beginners’ programming class using C language used in a wide-ranging field. The authors discuss about improvements of the interest of students for programming by the try that is to make animation by programs in a programming class and refer to its effects.

Clean Coal Technology Programs: Program Update 2003 (Volume 1)

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

2003-12-01

Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

Active sites environmental monitoring Program - Program Plan: Revision 2

International Nuclear Information System (INIS)

Morrissey, C.M.; Hicks, D.S.; Ashwood, T.L.; Cunningham, G.R.

1994-05-01

The Active Sites Environmental Monitoring Program (ASEMP), initiated in 1989, provides early detection and performance monitoring of active low-level-waste (LLW) and transuranic (TRU) waste facilities at Oak Ridge National Laboratory (ORNL). Several changes have recently occurred in regard to the sites that are currently used for waste storage and disposal. These changes require a second set of revisions to the ASEMP program plan. This document incorporates those revisions. This program plan presents the organization and procedures for monitoring the active sites. The program plan also provides internal reporting levels to guide the evaluation of monitoring results

NASA Graduate Student Researchers Program Ronald E. McNair PhD Program

Science.gov (United States)

Howard, Sunnie

1998-01-01

The NASA Ronald E. McNair PHD Program was funded in September 1995. Implementation began during the spring of 1996. The deferment of the actual program initial semester enabled the program to continue support through the fall semester of 1998. This was accomplished by a no-cost extension from August 15, 1998 through December 31, 1998. There were 12 fellows supported by the program in 1996, 15 fellows in 1997, and 15 fellows 1998. Current program capacity is 15 fellows per funding support. Support for the academic outreach component began in spring 1998. The program was named the "Good Enough" Crew Activity (GECA) in honor of Dr. McNair's philosophy of everyone being good enough to achieve anything they want bad enough. The program currently enrolls 65 students from the third through the eight grades. The program is held 12 Saturdays per semester. The time is 9:00 AM to 12:30 PM each Saturday Morning. Program direction and facilitation is jointly administered with the PHD fellows and the Saturday Academy staff. Dr. John Kelly, REM-PHD Principal Investigator serves in a program oversight and leadership capacity. Ms. Sunnie Howard, The NASA REM-PHD Administrative Coordinator serves in an administrative and logistical capacity. Mr. Aaron Hatch, the NASA-AMES Liaison Officer, serve@'in a consultative and curriculum review capacity. The first recognition activity will be held on December 12, 1998, with the students, parents, faculty, PHD fellows, and other local student support services persons. Program outreach efforts are jointly supported by the NASA REM-PHD Program and the National Space Grant College and Fellowship Program. The Ph.D. program reached its first milestone in May 1998. North Carolina A&T State University graduated the first Ph.D. fellows. The first three Ph.D. Alumni were Ronald E. McNair PHD Program Fellows. It is hoped that this is just the beginning of a highly acclaimed doctoral program. The ultimate program success will be recognized when the

Implementing corporate wellness programs: a business approach to program planning.

Science.gov (United States)

Helmer, D C; Dunn, L M; Eaton, K; Macedonio, C; Lubritz, L

1995-11-01

1. Support of key decision makers is critical to the successful implementation of a corporate wellness program. Therefore, the program implementation plan must be communicated in a format and language readily understood by business people. 2. A business approach to corporate wellness program planning provides a standardized way to communicate the implementation plan. 3. A business approach incorporates the program planning components in a format that ranges from general to specific. This approach allows for flexibility and responsiveness to changes in program planning. 4. Components of the business approach are the executive summary, purpose, background, ground rules, approach, requirements, scope of work, schedule, and financials.

Cavity design programs

International Nuclear Information System (INIS)

Nelson, E.M.

1996-01-01

Numerous computer programs are available to help accelerator physicists and engineers model and design accelerator cavities and other microwave components. This article discusses the problems these programs solve and the principles upon which these programs are based. Some examples of how these programs are used in the design of accelerator cavities are also given

Employee assistance programs: history and program description.

Science.gov (United States)

Gilbert, B

1994-10-01

1. The history and development of Employee Assistance Programs (EAPs) can be traced back to the 1800s. There are currently over 10,000 EAPs in the United States. 2. Standards for program accreditation and counselor certification have been established for EAPs. The "core technology of Employee Assistance Programs" includes identification of behavioural problems based on job performance issues, expert consultation with supervisors, appropriate use of constructive confrontation, microlinkages with treatment providers and resources, macrolinkages between providers, resources, and work organizations, focus on substance abuse, and evaluation of employee success based on job performance. 3. Some EAPs take a broad brush approach, and incorporate health promotion and managed care functions.

Offshore wind farm Bockstigen - installation and operation experience

Energy Technology Data Exchange (ETDEWEB)

Lange, B [Risoe National Lab., Wind Energy and Atmospheric Physics Dept., Roskilde (Denmark); Aagaard, E; Andersen, P E; Moeller, A [Wind World af 1997 A/S, Noerresundby (Denmark); Niklasson, S; Wickman, A [Vindkompaniet, Degerhamn (Sweden)

1999-03-01

The first Swedish offshore wind farm Bockstigen is operating since March 1998 near the coast of Gotland. It was built as a demonstration project by the Swedish wind farm developer Vindkompaniet, the Danish wind turbine manufacturer Wind World and the British offshore construction company Seacore and partly funded under the EU-THERMIE program. Bockstigen is the fourth offshore wind farm world-wide. While at previous wind farms the main emphasis laid on the demonstration of the technical feasibility of offshore wind energy utilisation, Bockstigen was aimed at demonstrating its economic viability. A number of innovative concepts have been employed: Drilled monopile foundations were used to save costs. A new construction method has been applied making use of a jack-up barge. A new control system for the turbines and the whole wind farm was developed, which controls the maximum power output, the flicker and the reactive power consumption depending on online measurements of the actual grid state. These new developments have been implemented successfully. A substantial cost reduction compared to previous offshore projects could be achieved. (au)

FY85 Program plan for the Defense Transuranic Waste Program (DTWP)

International Nuclear Information System (INIS)

1984-11-01

The Defense TRU Waste Program (DTWP) is the focal point for the Department of Energy in national planning, integration, and technical development for TRU waste management. The scope of this program extends from the point of TRU waste generation through delivery to a permanent repository. The TRU program maintains a close interface with repository development to ensure program compatibility and coordination. The defense TRU program does not directly address commercial activities that generate TRU waste. Instead, it is concerned with providing alternatives to manage existing and future defense TRU wastes. The FY85 Program Plan is consistent with the Defense TRU Waste Program goals and objectives stated in the Defense Transuranic Waste Program Strategy Document, January 1984. The roles of participants, the responsibilities and authorities for Research and Development (R and D), the organizational interfaces and communication channels for R and D and the establishment of procedures for planning, reporting, and budgeting of all R and D activities meet requirements stated in the Technical Management Plan for the Transuranic Waste Management Program. The Program Plan is revised as needed. The work breakdown structure is reflected graphically immediately following the Administration section and is described in the subsequent narrative. Detailed budget planning (i.e., programmatic funding and capital equipment) is presented for FY85; outyear budget projections are presented for future years

Dredging Operations Technical Support Program: Engineering Design and Environmental Assessment of Dredged Material Overflow from Hydraulically Filled Hopper Barges in Mobile Bay, Alabama

Science.gov (United States)

1990-09-01

turbid estuarine habitats such as Mobile Bay are very tolerant of moderately high concentrations of suspended sediments and thin layers of sediment...GULF OF MEXIC BAYOU 4M 2CAE SI2LTK Fiur 3. DsrbuinoAedmnTyesi oie a fo IsphordingLT anCLmb190 PART III: DREDGING EQUIPMENT AND OPERATIONAL TECHNIQUES...increase in ambient turbidity was noted. Water samples were collected at surface, middepth, and bottom. The sampling boats proceeded across their

An Intelligent Robot Programing

Energy Technology Data Exchange (ETDEWEB)

Hong, Seong Yong

2012-01-15

This book introduces an intelligent robot programing with background of the begging, introduction of VPL, and SPL, building of environment for robot platform, starting of robot programing, design of simulation environment, robot autonomy drive control programing, simulation graphic. Such as SPL graphic programing graphical image and graphical shapes, and graphical method application, application of procedure for robot control, robot multiprogramming, robot bumper sensor programing, robot LRF sencor programing and robot color sensor programing.

Purely Functional Structured Programming

OpenAIRE

Obua, Steven

2010-01-01

The idea of functional programming has played a big role in shaping today's landscape of mainstream programming languages. Another concept that dominates the current programming style is Dijkstra's structured programming. Both concepts have been successfully married, for example in the programming language Scala. This paper proposes how the same can be achieved for structured programming and PURELY functional programming via the notion of LINEAR SCOPE. One advantage of this proposal is that m...

An Intelligent Robot Programing

International Nuclear Information System (INIS)

Hong, Seong Yong

2012-01-01

This book introduces an intelligent robot programing with background of the begging, introduction of VPL, and SPL, building of environment for robot platform, starting of robot programing, design of simulation environment, robot autonomy drive control programing, simulation graphic. Such as SPL graphic programing graphical image and graphical shapes, and graphical method application, application of procedure for robot control, robot multiprogramming, robot bumper sensor programing, robot LRF sencor programing and robot color sensor programing.

Multi-dimensional Rankings, Program Termination, and Complexity Bounds of Flowchart Programs

OpenAIRE

Alias , Christophe; Darte , Alain; Feautrier , Paul; Gonnord , Laure

2010-01-01

International audience; Proving the termination of a flowchart program can be done by exhibiting a ranking function, i.e., a function from the program states to a well-founded set, which strictly decreases at each program step. A standard method to automatically generate such a function is to compute invariants for each program point and to search for a ranking in a restricted class of functions that can be handled with linear programming techniques. Previous algorithms based on affine rankin...

Programming in COBOL

CERN Document Server

Lancaster, G T

2014-01-01

Programming in COBOL is a simple yet concise how-to book that teaches the programming language in a short yet effective step-by-step manner, which can be easily understood by anyone with sufficient knowledge in information technology. Covering first the advantages of COBOL over other programming languages, the book discusses COBOL's divisions - identification, environment, procedure, and data, and then describes the testing of the COBOL source programs and program questions. The book is valuable for those who wish to learn basic COBOL language, but do not have the time to take manufacturers' o

Fusion Energy Postdoctoral Research Program, Professional Development Program: FY 1987 annual report

International Nuclear Information System (INIS)

1988-01-01

In FY 1986, Oak Ridge Associated Universities (ORAU) initiated two programs for the US Department of Energy (DOE), Office of Fusion Energy (OFE): the Fusion Energy Postdoctoral Research Program and the Fusion Energy Professional Development Program. These programs provide opportunities to conduct collaborative research in magnetic fusion energy research and development programs at DOE laboratories and contractor sites. Participants become trained in advanced fusion energy research, interact with outstanding professionals, and become familiar with energy-related national issues while making personal contributions to the search for solutions to scientific problems. Both programs enhance the national fusion energy research and development effort by providing channels for the exchange of scientists and engineers, the diffusion of ideas and knowledge, and the transfer of relevant technologies. These programs, along with the Magnetic Fusion Energy Science and Technology Fellowship Programs, compose the fusion energy manpower development programs administered by ORAU for DOE/OFE

Program Fullerene

DEFF Research Database (Denmark)

Wirz, Lukas; Peter, Schwerdtfeger,; Avery, James Emil

2013-01-01

Fullerene (Version 4.4), is a general purpose open-source program that can generate any fullerene isomer, perform topological and graph theoretical analysis, as well as calculate a number of physical and chemical properties. The program creates symmetric planar drawings of the fullerene graph, an......-Fowler, and Brinkmann-Fowler vertex insertions. The program is written in standard Fortran and C++, and can easily be installed on a Linux or UNIX environment....

SPOT Program

Science.gov (United States)

Smith, Jason T.; Welsh, Sam J.; Farinetti, Antonio L.; Wegner, Tim; Blakeslee, James; Deboeck, Toni F.; Dyer, Daniel; Corley, Bryan M.; Ollivierre, Jarmaine; Kramer, Leonard;

Effectiveness and Successful Program Elements of SOAR’s Afterschool Programs

Directory of Open Access Journals (Sweden)

Janet L. Johnson

2007-03-01

Full Text Available Project SOAR provided after-school programs that afforded expanded learning opportunities to help students succeed in local public schools and to contribute to the general welfare of the community. Program components focused on building students’ academic skills and positive attitudes, aided by teachers, mentors, parent education, and local agencies. Instructional programs were conducted to help reduce drug use and violence. Activities included academic assistance, technology training, mentoring, service learning projects, and education in life skills and the arts. Parent involvement was encouraged. Behavioral and academic outcomes—especially at the high school level—were analyzed to determine program effectiveness regarding academic achievement, dropout rates, and rates and frequency of suspensions. Successful program elements and strategies are noted.

Magnetic Composite Thin Films of FexOy Nanoparticles and Photocrosslinked Dextran Hydrogels

International Nuclear Information System (INIS)

Brunsen, Annette; Utech, Stefanie; Maskos, Michael; Knoll, Wolfgang; Jonas, Ulrich

2012-01-01

Magnetic hydrogel composites are promising candidates for a broad field of applications from medicine to mechanical engineering. Here, surface-attached composite films of magnetic nanoparticles (MNP) and a polymeric hydrogel (HG) were prepared from magnetic iron oxide nanoparticles and a carboxymethylated dextran with photoreactive benzophenone substituents. A blend of the MNP and the dextran polymer was prepared by mixing in solution, and after spin-coating and drying the blend film was converted into a stable MNP–HG composite by photocrosslinking through irradiation with UV light. The bulk composite material shows strong mobility in a magnetic field, imparted by the MNPs. By utilizing a surface layer of a photoreactive adhesion promoter on the substrates, the MNP–HG films were covalently immobilized during photocrosslinking. The high stability of the composite was documented by rinsing experiments with UV–Vis spectroscopy, while surface plasmon resonance and optical waveguide mode spectroscopy was employed to investigate the swelling behavior in dependence of the nanoparticle concentration, the particle type, and salt concentration. - Highlights: ► blending of iron oxide nanoparticles with photocrosslinkable carboxymethyldextran. ► UV irradiation of blend yields surface-attached, magnetic hydrogel films. ► film characterization by surface plasmon resonance/optical waveguide spectroscopy. ► swelling decreases with increasing nanoparticle content. ► swelling decreases with increasing NaCl salt concentration in the aqueous medium.

Extrinsic and intrinsic magnetic properties of Co1-x Fex Sb3

International Nuclear Information System (INIS)

Amornpitoksuk, P.; Ravot, D.; Mauger, A.; Tedenac, J.C.

2007-01-01

We report magnetic properties of iron in Co 1-x Fe x Sb 3 for x in the range 0 3+ in the low spin d 5 configuration in presence of a strong crystal field that screens the orbital momentum. The magnetic properties give evidence that a small fraction of iron is spin-frozen in magnetite ferrimagnetic clusters, and antiferromagnetic FeO clusters. Because both types of clusters represent only very minor phases, their detection by the usual analytical means such as X-rays is not possible. The remaining part is diluted in the matrix to form a semimagnetic semiconductor characterized by a Fe-Fe nearest-neighbor exchange interaction J that is antiferromagnetic, with |J|/k B ∼19.6 degree K